diff options
Diffstat (limited to 'drivers/usb/musb/musb_core.c')
| -rw-r--r-- | drivers/usb/musb/musb_core.c | 13 |
1 files changed, 9 insertions, 4 deletions
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index b4bbf8f2c23..0e8b8ab1d16 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -379,7 +379,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, u8 devctl, u8 power) { irqreturn_t handled = IRQ_NONE; - void __iomem *mbase = musb->mregs; DBG(3, "<== Power=%02x, DevCtl=%02x, int_usb=0x%x\n", power, devctl, int_usb); @@ -394,6 +393,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, if (devctl & MUSB_DEVCTL_HM) { #ifdef CONFIG_USB_MUSB_HDRC_HCD + void __iomem *mbase = musb->mregs; + switch (musb->xceiv->state) { case OTG_STATE_A_SUSPEND: /* remote wakeup? later, GetPortStatus @@ -471,6 +472,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, #ifdef CONFIG_USB_MUSB_HDRC_HCD /* see manual for the order of the tests */ if (int_usb & MUSB_INTR_SESSREQ) { + void __iomem *mbase = musb->mregs; + DBG(1, "SESSION_REQUEST (%s)\n", otg_state_string(musb)); /* IRQ arrives from ID pin sense or (later, if VBUS power @@ -519,6 +522,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, case OTG_STATE_A_WAIT_BCON: case OTG_STATE_A_WAIT_VRISE: if (musb->vbuserr_retry) { + void __iomem *mbase = musb->mregs; + musb->vbuserr_retry--; ignore = 1; devctl |= MUSB_DEVCTL_SESSION; @@ -622,6 +627,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, if (int_usb & MUSB_INTR_CONNECT) { struct usb_hcd *hcd = musb_to_hcd(musb); + void __iomem *mbase = musb->mregs; handled = IRQ_HANDLED; musb->is_active = 1; @@ -2007,7 +2013,6 @@ bad_config: /* host side needs more setup */ if (is_host_enabled(musb)) { struct usb_hcd *hcd = musb_to_hcd(musb); - u8 busctl; otg_set_host(musb->xceiv, &hcd->self); @@ -2018,9 +2023,9 @@ bad_config: /* program PHY to use external vBus if required */ if (plat->extvbus) { - busctl = musb_readb(musb->mregs, MUSB_ULPI_BUSCONTROL); + u8 busctl = musb_read_ulpi_buscontrol(musb->mregs); busctl |= MUSB_ULPI_USE_EXTVBUS; - musb_writeb(musb->mregs, MUSB_ULPI_BUSCONTROL, busctl); + musb_write_ulpi_buscontrol(musb->mregs, busctl); } } |