aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial/Kconfig')
-rw-r--r--drivers/usb/serial/Kconfig455
1 files changed, 455 insertions, 0 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
new file mode 100644
index 00000000000..b869076d9c7
--- /dev/null
+++ b/drivers/usb/serial/Kconfig
@@ -0,0 +1,455 @@
+#
+# USB Serial device configuration
+#
+
+menu "USB Serial Converter support"
+ depends on USB!=n
+
+config USB_SERIAL
+ tristate "USB Serial Converter support"
+ depends on USB
+ ---help---
+ Say Y here if you have a USB device that provides normal serial
+ ports, or acts like a serial device, and you want to connect it to
+ your USB bus.
+
+ Please read <file:Documentation/usb/usb-serial.txt> for more
+ information on the specifics of the different devices that are
+ supported, and on how to use them.
+
+ To compile this driver as a module, choose M here: the
+ module will be called usbserial.
+
+config USB_SERIAL_CONSOLE
+ bool "USB Serial Console device support (EXPERIMENTAL)"
+ depends on USB_SERIAL=y && EXPERIMENTAL
+ ---help---
+ If you say Y here, it will be possible to use a USB to serial
+ converter port as the system console (the system console is the
+ device which receives all kernel messages and warnings and which
+ allows logins in single user mode). This could be useful if some
+ terminal or printer is connected to that serial port.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyUSB0". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+ If you don't have a VGA card installed and you say Y here, the
+ kernel will automatically use the first USB to serial converter
+ port, /dev/ttyUSB0, as system console.
+
+ If unsure, say N.
+
+config USB_SERIAL_GENERIC
+ bool "USB Generic Serial Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use the generic USB serial driver. Please
+ read <file:Documentation/usb/usb-serial.txt> for more information on
+ using this driver. It is recommended that the "USB Serial converter
+ support" be compiled as a module for this driver to be used
+ properly.
+
+config USB_SERIAL_BELKIN
+ tristate "USB Belkin and Peracom Single Port Serial Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use a Belkin USB Serial single port
+ adaptor (F5U103 is one of the model numbers) or the Peracom single
+ port USB to serial adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called belkin_sa.
+
+config USB_SERIAL_WHITEHEAT
+ tristate "USB ConnectTech WhiteHEAT Serial Driver"
+ depends on USB_SERIAL && BROKEN_ON_SMP
+ help
+ Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
+ USB to serial converter device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called whiteheat.
+
+config USB_SERIAL_DIGI_ACCELEPORT
+ tristate "USB Digi International AccelePort USB Serial Driver"
+ depends on USB_SERIAL
+ ---help---
+ Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
+ 2 port (plus parallel port) and 4 port USB serial converters. The
+ parallel port on the USB 2 appears as a third serial port on Linux.
+ The Digi Acceleport USB 8 is not yet supported by this driver.
+
+ This driver works under SMP with the usb-uhci driver. It does not
+ work under SMP with the uhci driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called digi_acceleport.
+
+config USB_SERIAL_CP2101
+ tristate "USB CP2101 UART Bridge Controller"
+ depends on USB_SERIAL && EXPERIMENTAL
+ help
+ Say Y here if you want to use a CP2101/CP2102 based USB to RS232
+ converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cp2101.
+
+config USB_SERIAL_CYPRESS_M8
+ tristate "USB Cypress M8 USB Serial Driver"
+ depends on USB_SERIAL && EXPERIMENTAL
+ help
+ Say Y here if you want to use a device that contains the Cypress
+ USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
+
+ Attempted SMP support... send bug reports!
+
+ Supported microcontrollers in the CY4601 family are:
+ CY7C63741 CY7C63742 CY7C63743 CY7C64013
+
+ To compile this driver as a module, choose M here: the
+ module will be called cypress_m8.
+
+config USB_SERIAL_EMPEG
+ tristate "USB Empeg empeg-car Mark I/II Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to connect to your Empeg empeg-car Mark I/II
+ mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
+ device node. See <file:Documentation/usb/usb-serial.txt> for more
+ tidbits of information.
+
+ To compile this driver as a module, choose M here: the
+ module will be called empeg.
+
+config USB_SERIAL_FTDI_SIO
+ tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)"
+ depends on USB_SERIAL && EXPERIMENTAL
+ ---help---
+ Say Y here if you want to use a FTDI SIO single port USB to serial
+ converter device. The implementation I have is called the USC-1000.
+ This driver has also be tested with the 245 and 232 devices.
+
+ See <http://ftdi-usb-sio.sourceforge.net/> for more
+ information on this driver and the device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ftdi_sio.
+
+config USB_SERIAL_VISOR
+ tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to connect to your HandSpring Visor, Palm
+ m500 or m505 through its USB docking station. See
+ <http://usbvisor.sourceforge.net/> for more information on using this
+ driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called visor.
+
+config USB_SERIAL_IPAQ
+ tristate "USB PocketPC PDA Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
+ or any other PDA running Windows CE 3.0 or PocketPC 2002
+ using a USB cradle/cable. For information on using the driver,
+ read <file:Documentation/usb/usb-serial.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ipaq.
+
+config USB_SERIAL_IR
+ tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)"
+ depends on USB_SERIAL && EXPERIMENTAL
+ help
+ Say Y here if you want to enable simple serial support for USB IrDA
+ devices. This is useful if you do not want to use the full IrDA
+ stack.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ir-usb.
+
+config USB_SERIAL_EDGEPORT
+ tristate "USB Inside Out Edgeport Serial Driver"
+ depends on USB_SERIAL
+ ---help---
+ Say Y here if you want to use any of the following devices from
+ Inside Out Networks (Digi):
+ Edgeport/4
+ Rapidport/4
+ Edgeport/4t
+ Edgeport/2
+ Edgeport/4i
+ Edgeport/2i
+ Edgeport/421
+ Edgeport/21
+ Edgeport/8
+ Edgeport/8 Dual
+ Edgeport/2D8
+ Edgeport/4D8
+ Edgeport/8i
+ Edgeport/2 DIN
+ Edgeport/4 DIN
+ Edgeport/16 Dual
+
+ To compile this driver as a module, choose M here: the
+ module will be called io_edgeport.
+
+config USB_SERIAL_EDGEPORT_TI
+ tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use any of the devices from Inside Out
+ Networks (Digi) that are not supported by the io_edgeport driver.
+ This includes the Edgeport/1 device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called io_ti.
+
+config USB_SERIAL_GARMIN
+ tristate "USB Garmin GPS driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to connect to your Garmin GPS.
+ Should work with most Garmin GPS devices which have a native USB port.
+
+ See <http://sourceforge.net/projects/garmin-gps> for the latest
+ version of the driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called garmin_gps.
+
+config USB_SERIAL_IPW
+ tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)"
+ depends on USB_SERIAL && EXPERIMENTAL
+ help
+ Say Y here if you want to use a IPWireless USB modem such as
+ the ones supplied by Axity3G/Sentech South Africa.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ipw.
+
+config USB_SERIAL_KEYSPAN_PDA
+ tristate "USB Keyspan PDA Single Port Serial Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use a Keyspan PDA single port USB to
+ serial converter device. This driver makes use of firmware
+ developed from scratch by Brian Warner.
+
+ To compile this driver as a module, choose M here: the
+ module will be called keyspan_pda.
+
+config USB_SERIAL_KEYSPAN
+ tristate "USB Keyspan USA-xxx Serial Driver"
+ depends on USB_SERIAL
+ ---help---
+ Say Y here if you want to use Keyspan USB to serial converter
+ devices. This driver makes use of Keyspan's official firmware
+ and was developed with their support. You must also include
+ firmware to support your particular device(s).
+
+ See <http://misc.nu/hugh/keyspan.html> for more information.
+
+ To compile this driver as a module, choose M here: the
+ module will be called keyspan.
+
+config USB_SERIAL_KEYSPAN_MPR
+ bool "USB Keyspan MPR Firmware"
+ depends on USB_SERIAL_KEYSPAN
+ help
+ Say Y here to include firmware for the Keyspan MPR converter.
+
+config USB_SERIAL_KEYSPAN_USA28
+ bool "USB Keyspan USA-28 Firmware"
+ depends on USB_SERIAL_KEYSPAN
+ help
+ Say Y here to include firmware for the USA-28 converter.
+
+config USB_SERIAL_KEYSPAN_USA28X
+ bool "USB Keyspan USA-28X Firmware"
+ depends on USB_SERIAL_KEYSPAN
+ help
+ Say Y here to include firmware for the USA-28X converter.
+ Be sure you have a USA-28X, there are also 28XA and 28XB
+ models, the label underneath has the actual part number.
+
+config USB_SERIAL_KEYSPAN_USA28XA
+ bool "USB Keyspan USA-28XA Firmware"
+ depends on USB_SERIAL_KEYSPAN
+ help
+ Say Y here to include firmware for the USA-28XA converter.
+ Be sure you have a USA-28XA, there are also 28X and 28XB
+ models, the label underneath has the actual part number.
+
+config USB_SERIAL_KEYSPAN_USA28XB
+ bool "USB Keyspan USA-28XB Firmware"
+ depends on USB_SERIAL_KEYSPAN
+ help
+ Say Y here to include firmware for the USA-28XB converter.
+ Be sure you have a USA-28XB, there are also 28X and 28XA
+ models, the label underneath has the actual part number.
+
+config USB_SERIAL_KEYSPAN_USA19
+ bool "USB Keyspan USA-19 Firmware"
+ depends on USB_SERIAL_KEYSPAN
+ help
+ Say Y here to include firmware for the USA-19 converter.
+
+config USB_SERIAL_KEYSPAN_USA18X
+ bool "USB Keyspan USA-18X Firmware"
+ depends on USB_SERIAL_KEYSPAN
+ help
+ Say Y here to include firmware for the USA-18X converter.
+
+config USB_SERIAL_KEYSPAN_USA19W
+ bool "USB Keyspan USA-19W Firmware"
+ depends on USB_SERIAL_KEYSPAN
+ help
+ Say Y here to include firmware for the USA-19W converter.
+
+config USB_SERIAL_KEYSPAN_USA19QW
+ bool "USB Keyspan USA-19QW Firmware"
+ depends on USB_SERIAL_KEYSPAN
+ help
+ Say Y here to include firmware for the USA-19QW converter.
+
+config USB_SERIAL_KEYSPAN_USA19QI
+ bool "USB Keyspan USA-19QI Firmware"
+ depends on USB_SERIAL_KEYSPAN
+ help
+ Say Y here to include firmware for the USA-19QI converter.
+
+config USB_SERIAL_KEYSPAN_USA49W
+ bool "USB Keyspan USA-49W Firmware"
+ depends on USB_SERIAL_KEYSPAN
+ help
+ Say Y here to include firmware for the USA-49W converter.
+
+config USB_SERIAL_KEYSPAN_USA49WLC
+ bool "USB Keyspan USA-49WLC Firmware"
+ depends on USB_SERIAL_KEYSPAN
+ help
+ Say Y here to include firmware for the USA-49WLC converter.
+
+config USB_SERIAL_KLSI
+ tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)"
+ depends on USB_SERIAL && EXPERIMENTAL
+ ---help---
+ Say Y here if you want to use a KL5KUSB105 - based single port
+ serial adapter. The most widely known -- and currently the only
+ tested -- device in this category is the PalmConnect USB Serial
+ adapter sold by Palm Inc. for use with their Palm III and Palm V
+ series PDAs.
+
+ Please read <file:Documentation/usb/usb-serial.txt> for more
+ information.
+
+ To compile this driver as a module, choose M here: the
+ module will be called kl5kusb105.
+
+config USB_SERIAL_KOBIL_SCT
+ tristate "USB KOBIL chipcard reader"
+ depends on USB_SERIAL
+ ---help---
+ Say Y here if you want to use one of the following KOBIL USB chipcard
+ readers:
+
+ - USB TWIN
+ - KAAN Standard Plus
+ - KAAN SIM
+ - SecOVID Reader Plus
+ - B1 Professional
+ - KAAN Professional
+
+ Note that you need a current CT-API.
+ To compile this driver as a module, choose M here: the
+ module will be called kobil_sct.
+
+config USB_SERIAL_MCT_U232
+ tristate "USB MCT Single Port Serial Driver"
+ depends on USB_SERIAL
+ ---help---
+ Say Y here if you want to use a USB Serial single port adapter from
+ Magic Control Technology Corp. (U232 is one of the model numbers).
+
+ This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
+ BAY devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mct_u232.
+
+config USB_SERIAL_PL2303
+ tristate "USB Prolific 2303 Single Port Serial Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use the PL2303 USB Serial single port
+ adapter from Prolific.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pl2303.
+
+config USB_SERIAL_SAFE
+ tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)"
+ depends on USB_SERIAL && EXPERIMENTAL
+
+config USB_SERIAL_SAFE_PADDED
+ bool "USB Secure Encapsulated Driver - Padded"
+ depends on USB_SERIAL_SAFE
+
+config USB_SERIAL_TI
+ tristate "USB TI 3410/5052 Serial Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use the TI USB 3410 or 5052
+ serial devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ti_usb_3410_5052.
+
+config USB_SERIAL_CYBERJACK
+ tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)"
+ depends on USB_SERIAL && EXPERIMENTAL
+ ---help---
+ Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
+ reader. This is an interface to ISO 7816 compatible contactbased
+ chipcards, e.g. GSM SIMs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyberjack.
+
+ If unsure, say N.
+
+config USB_SERIAL_XIRCOM
+ tristate "USB Xircom / Entregra Single Port Serial Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use a Xircom or Entregra single port USB to
+ serial converter device. This driver makes use of firmware
+ developed from scratch by Brian Warner.
+
+ To compile this driver as a module, choose M here: the
+ module will be called keyspan_pda.
+
+config USB_SERIAL_OMNINET
+ tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
+ depends on USB_SERIAL && EXPERIMENTAL
+ help
+ Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
+
+ To compile this driver as a module, choose M here: the
+ module will be called omninet.
+
+config USB_EZUSB
+ bool
+ depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT
+ default y
+
+endmenu
+