aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/ftdi_sio.c146
-rw-r--r--drivers/usb/serial/ftdi_sio.h14
-rw-r--r--drivers/usb/serial/option.c228
3 files changed, 175 insertions, 213 deletions
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 0b03ddab53d..d1964a0c416 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -429,6 +429,9 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
+ { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
{ } /* Terminating entry */
};
@@ -545,6 +548,7 @@ static struct usb_serial_device_type ftdi_sio_device = {
#define WDR_TIMEOUT 5000 /* default urb timeout */
+#define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */
/* High and low are for DTR, RTS etc etc */
#define HIGH 1
@@ -593,62 +597,59 @@ static __u32 ftdi_232bm_baud_to_divisor(int baud)
return(ftdi_232bm_baud_base_to_divisor(baud, 48000000));
}
-static int set_rts(struct usb_serial_port *port, int high_or_low)
+#define set_mctrl(port, set) update_mctrl((port), (set), 0)
+#define clear_mctrl(port, clear) update_mctrl((port), 0, (clear))
+
+static int update_mctrl(struct usb_serial_port *port, unsigned int set, unsigned int clear)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
char *buf;
- unsigned ftdi_high_or_low;
+ unsigned urb_value;
int rv;
-
- buf = kmalloc(1, GFP_NOIO);
- if (!buf)
- return -ENOMEM;
-
- if (high_or_low) {
- ftdi_high_or_low = FTDI_SIO_SET_RTS_HIGH;
- priv->last_dtr_rts |= TIOCM_RTS;
- } else {
- ftdi_high_or_low = FTDI_SIO_SET_RTS_LOW;
- priv->last_dtr_rts &= ~TIOCM_RTS;
- }
- rv = usb_control_msg(port->serial->dev,
- usb_sndctrlpipe(port->serial->dev, 0),
- FTDI_SIO_SET_MODEM_CTRL_REQUEST,
- FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
- ftdi_high_or_low, priv->interface,
- buf, 0, WDR_TIMEOUT);
-
- kfree(buf);
- return rv;
-}
+ if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
+ dbg("%s - DTR|RTS not being set|cleared", __FUNCTION__);
+ return 0; /* no change */
+ }
-static int set_dtr(struct usb_serial_port *port, int high_or_low)
-{
- struct ftdi_private *priv = usb_get_serial_port_data(port);
- char *buf;
- unsigned ftdi_high_or_low;
- int rv;
-
buf = kmalloc(1, GFP_NOIO);
- if (!buf)
+ if (!buf) {
return -ENOMEM;
-
- if (high_or_low) {
- ftdi_high_or_low = FTDI_SIO_SET_DTR_HIGH;
- priv->last_dtr_rts |= TIOCM_DTR;
- } else {
- ftdi_high_or_low = FTDI_SIO_SET_DTR_LOW;
- priv->last_dtr_rts &= ~TIOCM_DTR;
}
+
+ clear &= ~set; /* 'set' takes precedence over 'clear' */
+ urb_value = 0;
+ if (clear & TIOCM_DTR)
+ urb_value |= FTDI_SIO_SET_DTR_LOW;
+ if (clear & TIOCM_RTS)
+ urb_value |= FTDI_SIO_SET_RTS_LOW;
+ if (set & TIOCM_DTR)
+ urb_value |= FTDI_SIO_SET_DTR_HIGH;
+ if (set & TIOCM_RTS)
+ urb_value |= FTDI_SIO_SET_RTS_HIGH;
rv = usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
FTDI_SIO_SET_MODEM_CTRL_REQUEST,
FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE,
- ftdi_high_or_low, priv->interface,
+ urb_value, priv->interface,
buf, 0, WDR_TIMEOUT);
kfree(buf);
+ if (rv < 0) {
+ err("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
+ __FUNCTION__,
+ (set & TIOCM_DTR) ? "HIGH" :
+ (clear & TIOCM_DTR) ? "LOW" : "unchanged",
+ (set & TIOCM_RTS) ? "HIGH" :
+ (clear & TIOCM_RTS) ? "LOW" : "unchanged");
+ } else {
+ dbg("%s - DTR %s, RTS %s", __FUNCTION__,
+ (set & TIOCM_DTR) ? "HIGH" :
+ (clear & TIOCM_DTR) ? "LOW" : "unchanged",
+ (set & TIOCM_RTS) ? "HIGH" :
+ (clear & TIOCM_RTS) ? "LOW" : "unchanged");
+ priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set;
+ }
return rv;
}
@@ -681,7 +682,7 @@ static int change_speed(struct usb_serial_port *port)
FTDI_SIO_SET_BAUDRATE_REQUEST,
FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
urb_value, urb_index,
- buf, 0, 100);
+ buf, 0, WDR_SHORT_TIMEOUT);
kfree(buf);
return rv;
@@ -1219,12 +1220,7 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp)
/* FIXME: Flow control might be enabled, so it should be checked -
we have no control of defaults! */
/* Turn on RTS and DTR since we are not flow controlling by default */
- if (set_dtr(port, HIGH) < 0) {
- err("%s Error from DTR HIGH urb", __FUNCTION__);
- }
- if (set_rts(port, HIGH) < 0){
- err("%s Error from RTS HIGH urb", __FUNCTION__);
- }
+ set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
/* Not throttled */
spin_lock_irqsave(&priv->rx_lock, flags);
@@ -1274,14 +1270,8 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp)
err("error from flowcontrol urb");
}
- /* drop DTR */
- if (set_dtr(port, LOW) < 0){
- err("Error from DTR LOW urb");
- }
- /* drop RTS */
- if (set_rts(port, LOW) < 0) {
- err("Error from RTS LOW urb");
- }
+ /* drop RTS and DTR */
+ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
} /* Note change no line if hupcl is off */
/* cancel any scheduled reading */
@@ -1797,7 +1787,7 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_
FTDI_SIO_SET_DATA_REQUEST,
FTDI_SIO_SET_DATA_REQUEST_TYPE,
urb_value , priv->interface,
- buf, 0, 100) < 0) {
+ buf, 0, WDR_SHORT_TIMEOUT) < 0) {
err("%s FAILED to set databits/stopbits/parity", __FUNCTION__);
}
@@ -1812,25 +1802,14 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_
err("%s error from disable flowcontrol urb", __FUNCTION__);
}
/* Drop RTS and DTR */
- if (set_dtr(port, LOW) < 0){
- err("%s Error from DTR LOW urb", __FUNCTION__);
- }
- if (set_rts(port, LOW) < 0){
- err("%s Error from RTS LOW urb", __FUNCTION__);
- }
-
+ clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
} else {
/* set the baudrate determined before */
if (change_speed(port)) {
err("%s urb failed to set baurdrate", __FUNCTION__);
}
/* Ensure RTS and DTR are raised */
- else if (set_dtr(port, HIGH) < 0){
- err("%s Error from DTR HIGH urb", __FUNCTION__);
- }
- else if (set_rts(port, HIGH) < 0){
- err("%s Error from RTS HIGH urb", __FUNCTION__);
- }
+ set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
}
/* Set flow control */
@@ -1942,35 +1921,8 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear)
{
- int ret;
-
dbg("%s TIOCMSET", __FUNCTION__);
- if (set & TIOCM_DTR){
- if ((ret = set_dtr(port, HIGH)) < 0) {
- err("Urb to set DTR failed");
- return(ret);
- }
- }
- if (set & TIOCM_RTS) {
- if ((ret = set_rts(port, HIGH)) < 0){
- err("Urb to set RTS failed");
- return(ret);
- }
- }
-
- if (clear & TIOCM_DTR){
- if ((ret = set_dtr(port, LOW)) < 0){
- err("Urb to unset DTR failed");
- return(ret);
- }
- }
- if (clear & TIOCM_RTS) {
- if ((ret = set_rts(port, LOW)) < 0){
- err("Urb to unset RTS failed");
- return(ret);
- }
- }
- return(0);
+ return update_mctrl(port, set, clear);
}
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 8866376823a..9f4342093e8 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -265,10 +265,24 @@
#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */
/*
+ * microHAM product IDs (http://www.microham.com).
+ * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>.
+ */
+#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
+#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
+
+/*
* Active Robots product ids.
*/
#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */
+/*
+ * Evolution Robotics products (http://www.evolution.com/).
+ * Submitted by Shawn M. Lavelle.
+ */
+#define EVOLUTION_VID 0xDEEE /* Vendor ID */
+#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index b722175f108..e9256408757 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -12,14 +12,25 @@
History:
2005-05-19 v0.1 Initial version, based on incomplete docs
- and analysis of misbehavior of the standard driver
+ and analysis of misbehavior with the standard driver
2005-05-20 v0.2 Extended the input buffer to avoid losing
random 64-byte chunks of data
2005-05-21 v0.3 implemented chars_in_buffer()
turned on low_latency
simplified the code somewhat
+ 2005-05-24 v0.4 option_write() sometimes deadlocked under heavy load
+ removed some dead code
+ added sponsor notice
+ coding style clean-up
+ 2005-06-20 v0.4.1 add missing braces :-/
+ killed end-of-line whitespace
+ 2005-07-15 v0.4.2 rename WLAN product to FUSION, add FUSION2
+
+ Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
+
*/
-#define DRIVER_VERSION "v0.3"
+
+#define DRIVER_VERSION "v0.4"
#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
#define DRIVER_DESC "Option Card (PC-Card to) USB to Serial Driver"
@@ -44,7 +55,6 @@ static int option_write_room (struct usb_serial_port *port);
static void option_instat_callback(struct urb *urb, struct pt_regs *regs);
-
static int option_write (struct usb_serial_port *port,
const unsigned char *buf, int count);
@@ -60,14 +70,17 @@ static int option_tiocmset (struct usb_serial_port *port, struct file *file,
static int option_send_setup (struct usb_serial_port *port);
/* Vendor and product IDs */
-#define OPTION_VENDOR_ID 0x0AF0
+#define OPTION_VENDOR_ID 0x0AF0
+
+#define OPTION_PRODUCT_OLD 0x5000
+#define OPTION_PRODUCT_FUSION 0x6000
+#define OPTION_PRODUCT_FUSION2 0x6300
-#define OPTION_PRODUCT_OLD 0x5000
-#define OPTION_PRODUCT_WLAN 0x6000
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
- { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_WLAN) },
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION) },
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
{ } /* Terminating entry */
};
@@ -85,58 +98,62 @@ static struct usb_driver option_driver = {
* recognizes separately, thus num_port=1.
*/
static struct usb_serial_device_type option_3port_device = {
- .owner = THIS_MODULE,
- .name = "Option 3-port card",
- .short_name = "option",
- .id_table = option_ids,
- .num_interrupt_in = NUM_DONT_CARE,
- .num_bulk_in = NUM_DONT_CARE,
- .num_bulk_out = NUM_DONT_CARE,
- .num_ports = 1, /* 3 */
- .open = option_open,
- .close = option_close,
- .write = option_write,
- .write_room = option_write_room,
- .chars_in_buffer = option_chars_in_buffer,
- .throttle = option_rx_throttle,
- .unthrottle = option_rx_unthrottle,
- .ioctl = option_ioctl,
- .set_termios = option_set_termios,
- .break_ctl = option_break_ctl,
- .tiocmget = option_tiocmget,
- .tiocmset = option_tiocmset,
- .attach = option_startup,
- .shutdown = option_shutdown,
- .read_int_callback = option_instat_callback,
+ .owner = THIS_MODULE,
+ .name = "Option 3G data card",
+ .short_name = "option",
+ .id_table = option_ids,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = NUM_DONT_CARE,
+ .num_bulk_out = NUM_DONT_CARE,
+ .num_ports = 1, /* 3, but the card reports its ports separately */
+ .open = option_open,
+ .close = option_close,
+ .write = option_write,
+ .write_room = option_write_room,
+ .chars_in_buffer = option_chars_in_buffer,
+ .throttle = option_rx_throttle,
+ .unthrottle = option_rx_unthrottle,
+ .ioctl = option_ioctl,
+ .set_termios = option_set_termios,
+ .break_ctl = option_break_ctl,
+ .tiocmget = option_tiocmget,
+ .tiocmset = option_tiocmset,
+ .attach = option_startup,
+ .shutdown = option_shutdown,
+ .read_int_callback = option_instat_callback,
};
+#ifdef CONFIG_USB_DEBUG
static int debug;
+#else
+#define debug 0
+#endif
+
/* per port private data */
-#define N_IN_URB 4
-#define N_OUT_URB 1
-#define IN_BUFLEN 1024
-#define OUT_BUFLEN 1024
+#define N_IN_URB 4
+#define N_OUT_URB 1
+#define IN_BUFLEN 1024
+#define OUT_BUFLEN 128
struct option_port_private {
/* Input endpoints and buffer for this port */
- struct urb *in_urbs[N_IN_URB];
- char in_buffer[N_IN_URB][IN_BUFLEN];
+ struct urb *in_urbs[N_IN_URB];
+ char in_buffer[N_IN_URB][IN_BUFLEN];
/* Output endpoints and buffer for this port */
- struct urb *out_urbs[N_OUT_URB];
- char out_buffer[N_OUT_URB][OUT_BUFLEN];
+ struct urb *out_urbs[N_OUT_URB];
+ char out_buffer[N_OUT_URB][OUT_BUFLEN];
/* Settings for the port */
- int rts_state; /* Handshaking pins (outputs) */
- int dtr_state;
- int cts_state; /* Handshaking pins (inputs) */
- int dsr_state;
- int dcd_state;
- int ri_state;
- // int break_on;
-
- unsigned long tx_start_time[N_OUT_URB];
+ int rts_state; /* Handshaking pins (outputs) */
+ int dtr_state;
+ int cts_state; /* Handshaking pins (inputs) */
+ int dsr_state;
+ int dcd_state;
+ int ri_state;
+
+ unsigned long tx_start_time[N_OUT_URB];
};
@@ -190,13 +207,13 @@ static void
option_break_ctl (struct usb_serial_port *port, int break_state)
{
/* Unfortunately, I don't know how to send a break */
- dbg("%s", __FUNCTION__);
+ dbg("%s", __FUNCTION__);
}
static void
option_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+ struct termios *old_termios)
{
dbg("%s", __FUNCTION__);
@@ -204,10 +221,10 @@ option_set_termios (struct usb_serial_port *port,
}
static int
-option_tiocmget(struct usb_serial_port *port, struct file *file)
+option_tiocmget (struct usb_serial_port *port, struct file *file)
{
- unsigned int value;
- struct option_port_private *portdata;
+ unsigned int value;
+ struct option_port_private *portdata;
portdata = usb_get_serial_port_data(port);
@@ -225,7 +242,7 @@ static int
option_tiocmset (struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear)
{
- struct option_port_private *portdata;
+ struct option_port_private *portdata;
portdata = usb_get_serial_port_data(port);
@@ -250,71 +267,50 @@ option_ioctl (struct usb_serial_port *port, struct file *file,
/* Write */
static int
-option_write(struct usb_serial_port *port,
- const unsigned char *buf, int count)
+option_write (struct usb_serial_port *port,
+ const unsigned char *buf, int count)
{
- struct option_port_private *portdata;
- int i;
- int left, todo;
- struct urb *this_urb = NULL; /* spurious */
- int err;
+ struct option_port_private *portdata;
+ int i;
+ int left, todo;
+ struct urb *this_urb = NULL; /* spurious */
+ int err;
portdata = usb_get_serial_port_data(port);
dbg("%s: write (%d chars)", __FUNCTION__, count);
-#if 0
- spin_lock(&port->lock);
- if (port->write_urb_busy) {
- spin_unlock(&port->lock);
- dbg("%s: already writing", __FUNCTION__);
- return 0;
- }
- port->write_urb_busy = 1;
- spin_unlock(&port->lock);
-#endif
-
i = 0;
left = count;
- while (left>0) {
+ for (i=0; left > 0 && i < N_OUT_URB; i++) {
todo = left;
if (todo > OUT_BUFLEN)
todo = OUT_BUFLEN;
- for (;i < N_OUT_URB; i++) {
- /* Check we have a valid urb/endpoint before we use it... */
- this_urb = portdata->out_urbs[i];
- if (this_urb->status != -EINPROGRESS)
- break;
+ this_urb = portdata->out_urbs[i];
+ if (this_urb->status == -EINPROGRESS) {
if (this_urb->transfer_flags & URB_ASYNC_UNLINK)
continue;
if (time_before(jiffies, portdata->tx_start_time[i] + 10 * HZ))
continue;
this_urb->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(this_urb);
+ continue;
}
-
- if (i == N_OUT_URB) {
- /* no bulk out free! */
- dbg("%s: no output urb -- left %d", __FUNCTION__,count-left);
-#if 0
- port->write_urb_busy = 0;
-#endif
- return count-left;
- }
+ if (this_urb->status != 0)
+ dbg("usb_write %p failed (err=%d)", this_urb, this_urb->status);
dbg("%s: endpoint %d buf %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), i);
+ /* send the data */
memcpy (this_urb->transfer_buffer, buf, todo);
-
- /* send the data out the bulk port */
this_urb->transfer_buffer_length = todo;
this_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
this_urb->dev = port->serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err) {
- dbg("usb_submit_urb %p (write bulk) failed (%d,, has %d)", this_urb, err, this_urb->status);
+ dbg("usb_submit_urb %p (write bulk) failed (%d, has %d)", this_urb, err, this_urb->status);
continue;
}
portdata->tx_start_time[i] = jiffies;
@@ -323,9 +319,6 @@ option_write(struct usb_serial_port *port,
}
count -= left;
-#if 0
- port->write_urb_busy = 0;
-#endif
dbg("%s: wrote (did %d)", __FUNCTION__, count);
return count;
}
@@ -333,7 +326,7 @@ option_write(struct usb_serial_port *port,
static void
option_indat_callback (struct urb *urb, struct pt_regs *regs)
{
- int i, err;
+ int i, err;
int endpoint;
struct usb_serial_port *port;
struct tty_struct *tty;
@@ -444,10 +437,11 @@ option_write_room (struct usb_serial_port *port)
portdata = usb_get_serial_port_data(port);
- for (i=0; i < N_OUT_URB; i++)
+ for (i=0; i < N_OUT_URB; i++) {
this_urb = portdata->out_urbs[i];
if (this_urb && this_urb->status != -EINPROGRESS)
data_len += OUT_BUFLEN;
+ }
dbg("%s: %d", __FUNCTION__, data_len);
return data_len;
@@ -464,11 +458,11 @@ option_chars_in_buffer (struct usb_serial_port *port)
portdata = usb_get_serial_port_data(port);
- for (i=0; i < N_OUT_URB; i++)
+ for (i=0; i < N_OUT_URB; i++) {
this_urb = portdata->out_urbs[i];
if (this_urb && this_urb->status == -EINPROGRESS)
data_len += this_urb->transfer_buffer_length;
-
+ }
dbg("%s: %d", __FUNCTION__, data_len);
return data_len;
}
@@ -477,10 +471,10 @@ option_chars_in_buffer (struct usb_serial_port *port)
static int
option_open (struct usb_serial_port *port, struct file *filp)
{
- struct option_port_private *portdata;
- struct usb_serial *serial = port->serial;
- int i, err;
- struct urb *urb;
+ struct option_port_private *portdata;
+ struct usb_serial *serial = port->serial;
+ int i, err;
+ struct urb *urb;
portdata = usb_get_serial_port_data(port);
@@ -528,7 +522,7 @@ option_open (struct usb_serial_port *port, struct file *filp)
}
static inline void
-stop_urb(struct urb *urb)
+stop_urb (struct urb *urb)
{
if (urb && urb->status == -EINPROGRESS) {
urb->transfer_flags &= ~URB_ASYNC_UNLINK;
@@ -537,11 +531,11 @@ stop_urb(struct urb *urb)
}
static void
-option_close(struct usb_serial_port *port, struct file *filp)
+option_close (struct usb_serial_port *port, struct file *filp)
{
- int i;
- struct usb_serial *serial = port->serial;
- struct option_port_private *portdata;
+ int i;
+ struct usb_serial *serial = port->serial;
+ struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
portdata = usb_get_serial_port_data(port);
@@ -589,11 +583,11 @@ option_setup_urb (struct usb_serial *serial, int endpoint,
/* Setup urbs */
static void
-option_setup_urbs(struct usb_serial *serial)
+option_setup_urbs (struct usb_serial *serial)
{
- int j;
- struct usb_serial_port *port;
- struct option_port_private *portdata;
+ int j;
+ struct usb_serial_port *port;
+ struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
@@ -617,7 +611,7 @@ option_setup_urbs(struct usb_serial *serial)
static int
-option_send_setup(struct usb_serial_port *port)
+option_send_setup (struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct option_port_private *portdata;
@@ -644,9 +638,9 @@ option_send_setup(struct usb_serial_port *port)
static int
option_startup (struct usb_serial *serial)
{
- int i, err;
- struct usb_serial_port *port;
- struct option_port_private *portdata;
+ int i, err;
+ struct usb_serial_port *port;
+ struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
@@ -677,9 +671,9 @@ option_startup (struct usb_serial *serial)
static void
option_shutdown (struct usb_serial *serial)
{
- int i, j;
- struct usb_serial_port *port;
- struct option_port_private *portdata;
+ int i, j;
+ struct usb_serial_port *port;
+ struct option_port_private *portdata;
dbg("%s", __FUNCTION__);
@@ -724,6 +718,8 @@ MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
+#ifdef CONFIG_USB_DEBUG
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug messages");
+#endif
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 04:59:46 +0000