aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/Kconfig10
-rw-r--r--drivers/usb/serial/Makefile1
-rw-r--r--drivers/usb/serial/ark3116.c5
-rw-r--r--drivers/usb/serial/bus.c16
-rw-r--r--drivers/usb/serial/ch341.c354
-rw-r--r--drivers/usb/serial/cp2101.c3
-rw-r--r--drivers/usb/serial/ftdi_sio.c5
-rw-r--r--drivers/usb/serial/funsoft.c21
-rw-r--r--drivers/usb/serial/ipaq.c3
-rw-r--r--drivers/usb/serial/kl5kusb105.c28
-rw-r--r--drivers/usb/serial/kobil_sct.c144
-rw-r--r--drivers/usb/serial/mct_u232.c28
-rw-r--r--drivers/usb/serial/oti6858.c2
-rw-r--r--drivers/usb/serial/pl2303.c1
-rw-r--r--drivers/usb/serial/pl2303.h1
-rw-r--r--drivers/usb/serial/safe_serial.c11
-rw-r--r--drivers/usb/serial/usb-serial.c42
-rw-r--r--drivers/usb/serial/visor.c64
18 files changed, 513 insertions, 226 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 43d6db696f9..99fefed7791 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -92,6 +92,16 @@ config USB_SERIAL_BELKIN
To compile this driver as a module, choose M here: the
module will be called belkin_sa.
+config USB_SERIAL_CH341
+ tristate "USB Winchiphead CH341 Single Port Serial Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use a Winchiphead CH341 single port
+ USB to serial adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ch341.
+
config USB_SERIAL_WHITEHEAT
tristate "USB ConnectTech WhiteHEAT Serial Driver"
depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 07a976eca6b..d6fb384e52b 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_USB_SERIAL_AIRCABLE) += aircable.o
obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o
obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o
obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o
+obj-$(CONFIG_USB_SERIAL_CH341) += ch341.o
obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o
obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o
obj-$(CONFIG_USB_SERIAL_CYPRESS_M8) += cypress_m8.o
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index c9fd486c1c7..2a8e537cb04 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -172,11 +172,6 @@ static void ark3116_set_termios(struct usb_serial_port *port,
dbg("%s - port %d", __FUNCTION__, port->number);
- if (!port->tty || !port->tty->termios) {
- dbg("%s - no tty structures", __FUNCTION__);
- return;
- }
-
spin_lock_irqsave(&priv->lock, flags);
if (!priv->termios_initialized) {
*(port->tty->termios) = tty_std_termios;
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index a47a24f8820..0b14aea8ebd 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -36,6 +36,16 @@ static int usb_serial_device_match (struct device *dev, struct device_driver *dr
return 0;
}
+static ssize_t show_port_number(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct usb_serial_port *port = to_usb_serial_port(dev);
+
+ return sprintf(buf, "%d\n", port->number - port->serial->minor);
+}
+
+static DEVICE_ATTR(port_number, S_IRUGO, show_port_number, NULL);
+
static int usb_serial_device_probe (struct device *dev)
{
struct usb_serial_driver *driver;
@@ -62,6 +72,10 @@ static int usb_serial_device_probe (struct device *dev)
goto exit;
}
+ retval = device_create_file(dev, &dev_attr_port_number);
+ if (retval)
+ goto exit;
+
minor = port->number;
tty_register_device (usb_serial_tty_driver, minor, dev);
dev_info(&port->serial->dev->dev,
@@ -84,6 +98,8 @@ static int usb_serial_device_remove (struct device *dev)
return -ENODEV;
}
+ device_remove_file(&port->dev, &dev_attr_port_number);
+
driver = port->serial->type;
if (driver->port_remove) {
if (!try_module_get(driver->driver.owner)) {
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
new file mode 100644
index 00000000000..6b252ceb39a
--- /dev/null
+++ b/drivers/usb/serial/ch341.c
@@ -0,0 +1,354 @@
+/*
+ * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk>
+ *
+ * ch341.c implements a serial port driver for the Winchiphead CH341.
+ *
+ * The CH341 device can be used to implement an RS232 asynchronous
+ * serial port, an IEEE-1284 parallel printer port or a memory-like
+ * interface. In all cases the CH341 supports an I2C interface as well.
+ * This driver only supports the asynchronous serial interface.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial.h>
+
+#define DEFAULT_BAUD_RATE 2400
+#define DEFAULT_TIMEOUT 1000
+
+static int debug;
+
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x4348, 0x5523) },
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct ch341_private {
+ unsigned baud_rate;
+ u8 dtr;
+ u8 rts;
+};
+
+static int ch341_control_out(struct usb_device *dev, u8 request,
+ u16 value, u16 index)
+{
+ int r;
+ dbg("ch341_control_out(%02x,%02x,%04x,%04x)", USB_DIR_OUT|0x40,
+ (int)request, (int)value, (int)index);
+
+ r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+ value, index, NULL, 0, DEFAULT_TIMEOUT);
+
+ return r;
+}
+
+static int ch341_control_in(struct usb_device *dev,
+ u8 request, u16 value, u16 index,
+ char *buf, unsigned bufsize)
+{
+ int r;
+ dbg("ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)", USB_DIR_IN|0x40,
+ (int)request, (int)value, (int)index, buf, (int)bufsize);
+
+ r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
+ USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+ value, index, buf, bufsize, DEFAULT_TIMEOUT);
+ return r;
+}
+
+static int ch341_set_baudrate(struct usb_device *dev,
+ struct ch341_private *priv)
+{
+ short a, b;
+ int r;
+
+ dbg("ch341_set_baudrate(%d)", priv->baud_rate);
+ switch (priv->baud_rate) {
+ case 2400:
+ a = 0xd901;
+ b = 0x0038;
+ break;
+ case 4800:
+ a = 0x6402;
+ b = 0x001f;
+ break;
+ case 9600:
+ a = 0xb202;
+ b = 0x0013;
+ break;
+ case 19200:
+ a = 0xd902;
+ b = 0x000d;
+ break;
+ case 38400:
+ a = 0x6403;
+ b = 0x000a;
+ break;
+ case 115200:
+ a = 0xcc03;
+ b = 0x0008;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ r = ch341_control_out(dev, 0x9a, 0x1312, a);
+ if (!r)
+ r = ch341_control_out(dev, 0x9a, 0x0f2c, b);
+
+ return r;
+}
+
+static int ch341_set_handshake(struct usb_device *dev,
+ struct ch341_private *priv)
+{
+ dbg("ch341_set_handshake(%d,%d)", priv->dtr, priv->rts);
+ return ch341_control_out(dev, 0xa4,
+ ~((priv->dtr?1<<5:0)|(priv->rts?1<<6:0)), 0);
+}
+
+static int ch341_get_status(struct usb_device *dev)
+{
+ char *buffer;
+ int r;
+ const unsigned size = 8;
+
+ dbg("ch341_get_status()");
+
+ buffer = kmalloc(size, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size);
+ if ( r < 0)
+ goto out;
+
+ /* Not having the datasheet for the CH341, we ignore the bytes returned
+ * from the device. Return error if the device did not respond in time.
+ */
+ r = 0;
+
+out: kfree(buffer);
+ return r;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
+{
+ char *buffer;
+ int r;
+ const unsigned size = 8;
+
+ dbg("ch341_configure()");
+
+ buffer = kmalloc(size, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ /* expect two bytes 0x27 0x00 */
+ r = ch341_control_in(dev, 0x5f, 0, 0, buffer, size);
+ if (r < 0)
+ goto out;
+
+ r = ch341_control_out(dev, 0xa1, 0, 0);
+ if (r < 0)
+ goto out;
+
+ r = ch341_set_baudrate(dev, priv);
+ if (r < 0)
+ goto out;
+
+ /* expect two bytes 0x56 0x00 */
+ r = ch341_control_in(dev, 0x95, 0x2518, 0, buffer, size);
+ if (r < 0)
+ goto out;
+
+ r = ch341_control_out(dev, 0x9a, 0x2518, 0x0050);
+ if (r < 0)
+ goto out;
+
+ /* expect 0xff 0xee */
+ r = ch341_get_status(dev);
+ if (r < 0)
+ goto out;
+
+ r = ch341_control_out(dev, 0xa1, 0x501f, 0xd90a);
+ if (r < 0)
+ goto out;
+
+ r = ch341_set_baudrate(dev, priv);
+ if (r < 0)
+ goto out;
+
+ r = ch341_set_handshake(dev, priv);
+ if (r < 0)
+ goto out;
+
+ /* expect 0x9f 0xee */
+ r = ch341_get_status(dev);
+
+out: kfree(buffer);
+ return r;
+}
+
+/* allocate private data */
+static int ch341_attach(struct usb_serial *serial)
+{
+ struct ch341_private *priv;
+ int r;
+
+ dbg("ch341_attach()");
+
+ /* private data */
+ priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->baud_rate = DEFAULT_BAUD_RATE;
+ priv->dtr = 1;
+ priv->rts = 1;
+
+ r = ch341_configure(serial->dev, priv);
+ if (r < 0)
+ goto error;
+
+ usb_set_serial_port_data(serial->port[0], priv);
+ return 0;
+
+error: kfree(priv);
+ return r;
+}
+
+/* open this device, set default parameters */
+static int ch341_open(struct usb_serial_port *port, struct file *filp)
+{
+ struct usb_serial *serial = port->serial;
+ struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
+ int r;
+
+ dbg("ch341_open()");
+
+ priv->baud_rate = DEFAULT_BAUD_RATE;
+ priv->dtr = 1;
+ priv->rts = 1;
+
+ r = ch341_configure(serial->dev, priv);
+ if (r)
+ goto out;
+
+ r = ch341_set_handshake(serial->dev, priv);
+ if (r)
+ goto out;
+
+ r = ch341_set_baudrate(serial->dev, priv);
+ if (r)
+ goto out;
+
+ r = usb_serial_generic_open(port, filp);
+
+out: return r;
+}
+
+/* Old_termios contains the original termios settings and
+ * tty->termios contains the new setting to be used.
+ */
+static void ch341_set_termios(struct usb_serial_port *port,
+ struct ktermios *old_termios)
+{
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ struct tty_struct *tty = port->tty;
+ unsigned baud_rate;
+
+ dbg("ch341_set_termios()");
+
+ if (!tty || !tty->termios)
+ return;
+
+ baud_rate = tty_get_baud_rate(tty);
+
+ switch (baud_rate) {
+ case 2400:
+ case 4800:
+ case 9600:
+ case 19200:
+ case 38400:
+ case 115200:
+ priv->baud_rate = baud_rate;
+ break;
+ default:
+ dbg("Rate %d not supported, using %d",
+ baud_rate, DEFAULT_BAUD_RATE);
+ priv->baud_rate = DEFAULT_BAUD_RATE;
+ }
+
+ ch341_set_baudrate(port->serial->dev, priv);
+
+ /* Unimplemented:
+ * (cflag & CSIZE) : data bits [5, 8]
+ * (cflag & PARENB) : parity {NONE, EVEN, ODD}
+ * (cflag & CSTOPB) : stop bits [1, 2]
+ */
+}
+
+static struct usb_driver ch341_driver = {
+ .name = "ch341",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+ .no_dynamic_id = 1,
+};
+
+static struct usb_serial_driver ch341_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "ch341-uart",
+ },
+ .id_table = id_table,
+ .usb_driver = &ch341_driver,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = 1,
+ .num_bulk_out = 1,
+ .num_ports = 1,
+ .open = ch341_open,
+ .set_termios = ch341_set_termios,
+ .attach = ch341_attach,
+};
+
+static int __init ch341_init(void)
+{
+ int retval;
+
+ retval = usb_serial_register(&ch341_device);
+ if (retval)
+ return retval;
+ retval = usb_register(&ch341_driver);
+ if (retval)
+ usb_serial_deregister(&ch341_device);
+ return retval;
+}
+
+static void __exit ch341_exit(void)
+{
+ usb_deregister(&ch341_driver);
+ usb_serial_deregister(&ch341_device);
+}
+
+module_init(ch341_init);
+module_exit(ch341_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
+/* EOF ch341.c */
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 33f6ee50b8d..eb7df1835c1 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -53,6 +53,7 @@ static void cp2101_shutdown(struct usb_serial*);
static int debug;
static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
{ USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
{ USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
@@ -521,7 +522,7 @@ static void cp2101_set_termios (struct usb_serial_port *port,
dbg("%s - port %d", __FUNCTION__, port->number);
- if ((!port->tty) || (!port->tty->termios)) {
+ if (!port->tty || !port->tty->termios) {
dbg("%s - no tty structures", __FUNCTION__);
return;
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 2d045857b18..e4c248c98e8 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1169,7 +1169,9 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
/* XXX see create_sysfs_attrs */
if (priv->chip_type != SIO) {
device_remove_file(&port->dev, &dev_attr_event_char);
- if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) {
+ if (priv->chip_type == FT232BM ||
+ priv->chip_type == FT2232C ||
+ priv->chip_type == FT232RL) {
device_remove_file(&port->dev, &dev_attr_latency_timer);
}
}
@@ -2102,6 +2104,7 @@ static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
case FT8U232AM:
case FT232BM:
case FT2232C:
+ case FT232RL:
/* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same
format as the data returned from the in point */
if ((ret = usb_control_msg(port->serial->dev,
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index 4092f6dc9ef..b5194dc7d3b 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -24,26 +24,6 @@ static struct usb_device_id id_table [] = {
};
MODULE_DEVICE_TABLE(usb, id_table);
-static int funsoft_ioctl(struct usb_serial_port *port, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct ktermios t;
-
- dbg("%s - port %d, cmd 0x%04x", __FUNCTION__, port->number, cmd);
-
- if (cmd == TCSETSF) {
- if (user_termios_to_kernel_termios(&t, (struct termios __user *)arg))
- return -EFAULT;
-
- dbg("%s - iflag:%x oflag:%x cflag:%x lflag:%x", __FUNCTION__,
- t.c_iflag, t.c_oflag, t.c_cflag, t.c_lflag);
-
- if (!(t.c_lflag & ICANON))
- return -EINVAL;
- }
- return -ENOIOCTLCMD;
-}
-
static struct usb_driver funsoft_driver = {
.name = "funsoft",
.probe = usb_serial_probe,
@@ -63,7 +43,6 @@ static struct usb_serial_driver funsoft_device = {
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
- .ioctl = funsoft_ioctl,
};
static int __init funsoft_init(void)
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 6a3a704b584..e836ad07fdb 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -256,6 +256,7 @@ static struct usb_device_id ipaq_id_table [] = {
{ USB_DEVICE(0x04DD, 0x9121) }, /* SHARP WS004SH USB Modem */
{ USB_DEVICE(0x04DD, 0x9123) }, /* SHARP WS007SH USB Modem */
{ USB_DEVICE(0x04DD, 0x9151) }, /* SHARP S01SH USB Modem */
+ { USB_DEVICE(0x04DD, 0x91AC) }, /* SHARP WS011SH USB Modem */
{ USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */
{ USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
{ USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */
@@ -646,11 +647,13 @@ static int ipaq_open(struct usb_serial_port *port, struct file *filp)
kfree(port->bulk_out_buffer);
port->bulk_in_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL);
if (port->bulk_in_buffer == NULL) {
+ port->bulk_out_buffer = NULL; /* prevent double free */
goto enomem;
}
port->bulk_out_buffer = kmalloc(URBDATA_SIZE, GFP_KERNEL);
if (port->bulk_out_buffer == NULL) {
kfree(port->bulk_in_buffer);
+ port->bulk_in_buffer = NULL;
goto enomem;
}
port->read_urb->transfer_buffer = port->bulk_in_buffer;
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 5a4127e62c4..90e3216abd1 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -728,24 +728,32 @@ static void klsi_105_set_termios (struct usb_serial_port *port,
#endif
}
- switch(cflag & CBAUD) {
- case B0: /* handled below */
+ switch(tty_get_baud_rate(port->tty)) {
+ case 0: /* handled below */
break;
- case B1200: priv->cfg.baudrate = kl5kusb105a_sio_b1200;
+ case 1200:
+ priv->cfg.baudrate = kl5kusb105a_sio_b1200;
break;
- case B2400: priv->cfg.baudrate = kl5kusb105a_sio_b2400;
+ case 2400:
+ priv->cfg.baudrate = kl5kusb105a_sio_b2400;
break;
- case B4800: priv->cfg.baudrate = kl5kusb105a_sio_b4800;
+ case 4800:
+ priv->cfg.baudrate = kl5kusb105a_sio_b4800;
break;
- case B9600: priv->cfg.baudrate = kl5kusb105a_sio_b9600;
+ case 9600:
+ priv->cfg.baudrate = kl5kusb105a_sio_b9600;
break;
- case B19200: priv->cfg.baudrate = kl5kusb105a_sio_b19200;
+ case 19200:
+ priv->cfg.baudrate = kl5kusb105a_sio_b19200;
break;
- case B38400: priv->cfg.baudrate = kl5kusb105a_sio_b38400;
+ case 38400:
+ priv->cfg.baudrate = kl5kusb105a_sio_b38400;
break;
- case B57600: priv->cfg.baudrate = kl5kusb105a_sio_b57600;
+ case 57600:
+ priv->cfg.baudrate = kl5kusb105a_sio_b57600;
break;
- case B115200: priv->cfg.baudrate = kl5kusb105a_sio_b115200;
+ case 115200:
+ priv->cfg.baudrate = kl5kusb105a_sio_b115200;
break;
default:
err("KLSI USB->Serial converter:"
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 02a86dbc0e9..6f224195bd2 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -82,6 +82,7 @@ static int kobil_tiocmset(struct usb_serial_port *port, struct file *file,
unsigned int set, unsigned int clear);
static void kobil_read_int_callback( struct urb *urb );
static void kobil_write_callback( struct urb *purb );
+static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old);
static struct usb_device_id id_table [] = {
@@ -119,6 +120,7 @@ static struct usb_serial_driver kobil_device = {
.attach = kobil_startup,
.shutdown = kobil_shutdown,
.ioctl = kobil_ioctl,
+ .set_termios = kobil_set_termios,
.tiocmget = kobil_tiocmget,
.tiocmset = kobil_tiocmset,
.open = kobil_open,
@@ -137,7 +139,6 @@ struct kobil_private {
int cur_pos; // index of the next char to send in buf
__u16 device_type;
int line_state;
- struct ktermios internal_termios;
};
@@ -216,7 +217,7 @@ static void kobil_shutdown (struct usb_serial *serial)
static int kobil_open (struct usb_serial_port *port, struct file *filp)
{
- int i, result = 0;
+ int result = 0;
struct kobil_private *priv;
unsigned char *transfer_buffer;
int transfer_buffer_length = 8;
@@ -242,16 +243,6 @@ static int kobil_open (struct usb_serial_port *port, struct file *filp)
port->tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
port->tty->termios->c_oflag &= ~ONLCR; // do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D)
- // set up internal termios structure
- priv->internal_termios.c_iflag = port->tty->termios->c_iflag;
- priv->internal_termios.c_oflag = port->tty->termios->c_oflag;
- priv->internal_termios.c_cflag = port->tty->termios->c_cflag;
- priv->internal_termios.c_lflag = port->tty->termios->c_lflag;
-
- for (i=0; i<NCCS; i++) {
- priv->internal_termios.c_cc[i] = port->tty->termios->c_cc[i];
- }
-
// allocate memory for transfer buffer
transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
if (! transfer_buffer) {
@@ -607,102 +598,79 @@ static int kobil_tiocmset(struct usb_serial_port *port, struct file *file,
return (result < 0) ? result : 0;
}
-
-static int kobil_ioctl(struct usb_serial_port *port, struct file *file,
- unsigned int cmd, unsigned long arg)
+static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old)
{
struct kobil_private * priv;
int result;
unsigned short urb_val = 0;
- unsigned char *transfer_buffer;
- int transfer_buffer_length = 8;
- char *settings;
- void __user *user_arg = (void __user *)arg;
+ int c_cflag = port->tty->termios->c_cflag;
+ speed_t speed;
+ void * settings;
priv = usb_get_serial_port_data(port);
- if ((priv->device_type == KOBIL_USBTWIN_PRODUCT_ID) || (priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)) {
+ if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)
// This device doesn't support ioctl calls
- return 0;
- }
-
- switch (cmd) {
- case TCGETS: // 0x5401
- if (!access_ok(VERIFY_WRITE, user_arg, sizeof(struct ktermios))) {
- dbg("%s - port %d Error in access_ok", __FUNCTION__, port->number);
- return -EFAULT;
- }
- if (kernel_termios_to_user_termios((struct ktermios __user *)arg,
- &priv->internal_termios))
- return -EFAULT;
- return 0;
-
- case TCSETS: // 0x5402
- if (!(port->tty->termios)) {
- dbg("%s - port %d Error: port->tty->termios is NULL", __FUNCTION__, port->number);
- return -ENOTTY;
- }
- if (!access_ok(VERIFY_READ, user_arg, sizeof(struct ktermios))) {
- dbg("%s - port %d Error in access_ok", __FUNCTION__, port->number);
- return -EFAULT;
- }
- if (user_termios_to_kernel_termios(&priv->internal_termios,
- (struct ktermios __user *)arg))
- return -EFAULT;
-
- settings = kzalloc(50, GFP_KERNEL);
- if (! settings) {
- return -ENOBUFS;
- }
+ return;
- switch (priv->internal_termios.c_cflag & CBAUD) {
- case B1200:
+ switch (speed = tty_get_baud_rate(port->tty)) {
+ case 1200:
urb_val = SUSBCR_SBR_1200;
- strcat(settings, "1200 ");
break;
- case B9600:
+ case 9600:
default:
urb_val = SUSBCR_SBR_9600;
- strcat(settings, "9600 ");
break;
- }
+ }
+ urb_val |= (c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits : SUSBCR_SPASB_1StopBit;
+
+ settings = kzalloc(50, GFP_KERNEL);
+ if (! settings)
+ return;
- urb_val |= (priv->internal_termios.c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits : SUSBCR_SPASB_1StopBit;
- strcat(settings, (priv->internal_termios.c_cflag & CSTOPB) ? "2 StopBits " : "1 StopBit ");
+ sprintf(settings, "%d ", speed);
- if (priv->internal_termios.c_cflag & PARENB) {
- if (priv->internal_termios.c_cflag & PARODD) {
- urb_val |= SUSBCR_SPASB_OddParity;
- strcat(settings, "Odd Parity");
- } else {
- urb_val |= SUSBCR_SPASB_EvenParity;
- strcat(settings, "Even Parity");
- }
+ if (c_cflag & PARENB) {
+ if (c_cflag & PARODD) {
+ urb_val |= SUSBCR_SPASB_OddParity;
+ strcat(settings, "Odd Parity");
} else {
- urb_val |= SUSBCR_SPASB_NoParity;
- strcat(settings, "No Parity");
+ urb_val |= SUSBCR_SPASB_EvenParity;
+ strcat(settings, "Even Parity");
}
- dbg("%s - port %d setting port to: %s", __FUNCTION__, port->number, settings );
+ } else {
+ urb_val |= SUSBCR_SPASB_NoParity;
+ strcat(settings, "No Parity");
+ }
- result = usb_control_msg( port->serial->dev,
- usb_rcvctrlpipe(port->serial->dev, 0 ),
- SUSBCRequest_SetBaudRateParityAndStopBits,
- USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
- urb_val,
- 0,
- settings,
- 0,
- KOBIL_TIMEOUT
- );
+ result = usb_control_msg( port->serial->dev,
+ usb_rcvctrlpipe(port->serial->dev, 0 ),
+ SUSBCRequest_SetBaudRateParityAndStopBits,
+ USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
+ urb_val,
+ 0,
+ settings,
+ 0,
+ KOBIL_TIMEOUT
+ );
+ kfree(settings);
+}
- dbg("%s - port %d Send set_baudrate URB returns: %i", __FUNCTION__, port->number, result);
- kfree(settings);
+static int kobil_ioctl(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
+{
+ struct kobil_private * priv = usb_get_serial_port_data(port);
+ unsigned char *transfer_buffer;
+ int transfer_buffer_length = 8;
+ int result;
+
+ if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID)
+ // This device doesn't support ioctl calls
return 0;
+ switch (cmd) {
case TCFLSH: // 0x540B
transfer_buffer = kmalloc(transfer_buffer_length, GFP_KERNEL);
- if (! transfer_buffer) {
+ if (! transfer_buffer)
return -ENOBUFS;
- }
result = usb_control_msg( port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0 ),
@@ -716,15 +684,13 @@ static int kobil_ioctl(struct usb_serial_port *port, struct file *file,
);
dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __FUNCTION__, port->number, result);
-
kfree(transfer_buffer);
- return ((result < 0) ? -EFAULT : 0);
-
+ return (result < 0) ? -EFAULT : 0;
+ default:
+ return -ENOIOCTLCMD;
}
- return -ENOIOCTLCMD;
}
-
static int __init kobil_init (void)
{
int retval;
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index e08c9bb403d..0dc99f75bb0 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -206,20 +206,20 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value
}
} else {
switch (value) {
- case 300: break;
- case 600: break;
- case 1200: break;
- case 2400: break;
- case 4800: break;
- case 9600: break;
- case 19200: break;
- case 38400: break;
- case 57600: break;
- case 115200: break;
- default:
- err("MCT USB-RS232: unsupported baudrate request 0x%x,"
- " using default of B9600", value);
- value = 9600;
+ case 300: break;
+ case 600: break;
+ case 1200: break;
+ case 2400: break;
+ case 4800: break;
+ case 9600: break;
+ case 19200: break;
+ case 38400: break;
+ case 57600: break;
+ case 115200: break;
+ default:
+ err("MCT USB-RS232: unsupported baudrate request 0x%x,"
+ " using default of B9600", value);
+ value = 9600;
}
return 115200/value;
}
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 64f3f66a7a3..d19861166b5 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -1144,7 +1144,7 @@ static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
if (size == 0)
return NULL;
- pb = (struct pl2303_buf *)kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
+ pb = kmalloc(sizeof(struct pl2303_buf), GFP_KERNEL);
if (pb == NULL)
return NULL;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index f9f85f56f0d..1da57fd9ea2 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -73,6 +73,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) },
+ { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },
{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
{ USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index f9a71d0c102..c39bace5cbc 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -59,6 +59,7 @@
#define SIEMENS_PRODUCT_ID_SX1 0x0001
#define SIEMENS_PRODUCT_ID_X65 0x0003
#define SIEMENS_PRODUCT_ID_X75 0x0004
+#define SIEMENS_PRODUCT_ID_EF81 0x0005
#define SYNTECH_VENDOR_ID 0x0745
#define SYNTECH_PRODUCT_ID 0x0001
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 51669b7622b..4e6dcc199be 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -90,18 +90,12 @@ MODULE_AUTHOR (DRIVER_AUTHOR);
MODULE_DESCRIPTION (DRIVER_DESC);
MODULE_LICENSE("GPL");
-#if defined(CONFIG_USBD_SAFE_SERIAL_VENDOR) && !defined(CONFIG_USBD_SAFE_SERIAL_PRODUCT)
-#error "SAFE_SERIAL_VENDOR defined without SAFE_SERIAL_PRODUCT"
-#endif
-
-#if ! defined(CONFIG_USBD_SAFE_SERIAL_VENDOR)
static __u16 vendor; // no default
static __u16 product; // no default
module_param(vendor, ushort, 0);
MODULE_PARM_DESC(vendor, "User specified USB idVendor (required)");
module_param(product, ushort, 0);
MODULE_PARM_DESC(product, "User specified USB idProduct (required)");
-#endif
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
@@ -145,11 +139,6 @@ static struct usb_device_id id_table[] = {
{MY_USB_DEVICE (0x4dd, 0x8003, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Collie
{MY_USB_DEVICE (0x4dd, 0x8004, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Collie
{MY_USB_DEVICE (0x5f9, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, // Sharp tmp
-#if defined(CONFIG_USB_SAFE_SERIAL_VENDOR)
- {MY_USB_DEVICE
- (CONFIG_USB_SAFE_SERIAL_VENDOR, CONFIG_USB_SAFE_SERIAL_PRODUCT, CDC_DEVICE_CLASS,
- LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},
-#endif
// extra null entry for module
// vendor/produc parameters
{MY_USB_DEVICE (0, 0, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)},
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 9bf01a5efc8..4b1bd7def4a 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -578,6 +578,17 @@ static void kill_traffic(struct usb_serial_port *port)
{
usb_kill_urb(port->read_urb);
usb_kill_urb(port->write_urb);
+ /*
+ * This is tricky.
+ * Some drivers submit the read_urb in the
+ * handler for the write_urb or vice versa
+ * this order determines the order in which
+ * usb_kill_urb() must be used to reliably
+ * kill the URBs. As it is unknown here,
+ * both orders must be used in turn.
+ * The call below is not redundant.
+ */
+ usb_kill_urb(port->read_urb);
usb_kill_urb(port->interrupt_in_urb);
usb_kill_urb(port->interrupt_out_urb);
}
@@ -651,16 +662,14 @@ exit:
static struct usb_serial_driver *search_serial_device(struct usb_interface *iface)
{
- struct list_head *p;
const struct usb_device_id *id;
- struct usb_serial_driver *t;
+ struct usb_serial_driver *drv;
/* Check if the usb id matches a known device */
- list_for_each(p, &usb_serial_driver_list) {
- t = list_entry(p, struct usb_serial_driver, driver_list);
- id = get_iface_id(t, iface);
+ list_for_each_entry(drv, &usb_serial_driver_list, driver_list) {
+ id = get_iface_id(drv, iface);
if (id)
- return t;
+ return drv;
}
return NULL;
@@ -800,9 +809,6 @@ int usb_serial_probe(struct usb_interface *interface,
/* END HORRIBLE HACK FOR PL2303 */
#endif
- /* found all that we need */
- dev_info(&interface->dev, "%s converter detected\n", type->description);
-
#ifdef CONFIG_USB_SERIAL_GENERIC
if (type == &usb_serial_generic_device) {
num_ports = num_bulk_out;
@@ -836,6 +842,24 @@ int usb_serial_probe(struct usb_interface *interface,
serial->num_interrupt_in = num_interrupt_in;
serial->num_interrupt_out = num_interrupt_out;
+ /* check that the device meets the driver's requirements */
+ if ((type->num_interrupt_in != NUM_DONT_CARE &&
+ type->num_interrupt_in != num_interrupt_in)
+ || (type->num_interrupt_out != NUM_DONT_CARE &&
+ type->num_interrupt_out != num_interrupt_out)
+ || (type->num_bulk_in != NUM_DONT_CARE &&
+ type->num_bulk_in != num_bulk_in)
+ || (type->num_bulk_out != NUM_DONT_CARE &&
+ type->num_bulk_out != num_bulk_out)) {
+ dbg("wrong number of endpoints");
+ kfree(serial);
+ return -EIO;
+ }
+
+ /* found all that we need */
+ dev_info(&interface->dev, "%s converter detected\n",
+ type->description);
+
/* create our ports, we need as many as the max endpoints */
/* we don't use num_ports here cauz some devices have more endpoint pairs than ports */
max_endpoints = max(num_bulk_in, num_bulk_out);
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 30e08c0bcdc..7ee087fed91 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -46,7 +46,6 @@ static int visor_probe (struct usb_serial *serial, const struct usb_device_id
static int visor_calc_num_ports(struct usb_serial *serial);
static void visor_shutdown (struct usb_serial *serial);
static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void visor_set_termios (struct usb_serial_port *port, struct ktermios *old_termios);
static void visor_write_bulk_callback (struct urb *urb);
static void visor_read_bulk_callback (struct urb *urb);
static void visor_read_int_callback (struct urb *urb);
@@ -203,7 +202,6 @@ static struct usb_serial_driver handspring_device = {
.calc_num_ports = visor_calc_num_ports,
.shutdown = visor_shutdown,
.ioctl = visor_ioctl,
- .set_termios = visor_set_termios,
.write = visor_write,
.write_room = visor_write_room,
.chars_in_buffer = visor_chars_in_buffer,
@@ -234,7 +232,6 @@ static struct usb_serial_driver clie_5_device = {
.calc_num_ports = visor_calc_num_ports,
.shutdown = visor_shutdown,
.ioctl = visor_ioctl,
- .set_termios = visor_set_termios,
.write = visor_write,
.write_room = visor_write_room,
.chars_in_buffer = visor_chars_in_buffer,
@@ -262,7 +259,6 @@ static struct usb_serial_driver clie_3_5_device = {
.unthrottle = visor_unthrottle,
.attach = clie_3_5_startup,
.ioctl = visor_ioctl,
- .set_termios = visor_set_termios,
.write = visor_write,
.write_room = visor_write_room,
.chars_in_buffer = visor_chars_in_buffer,
@@ -936,66 +932,6 @@ static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsign
return -ENOIOCTLCMD;
}
-
-/* This function is all nice and good, but we don't change anything based on it :) */
-static void visor_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
-{
- unsigned int cflag;
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- if ((!port->tty) || (!port->tty->termios)) {
- dbg("%s - no tty structures", __FUNCTION__);
- return;
- }
-
- cflag = port->tty->termios->c_cflag;
-
- /* get the byte size */
- switch (cflag & CSIZE) {
- case CS5: dbg("%s - data bits = 5", __FUNCTION__); break;
- case CS6: dbg("%s - data bits = 6", __FUNCTION__); break;
- case CS7: dbg("%s - data bits = 7", __FUNCTION__); break;
- default:
- case CS8: dbg("%s - data bits = 8", __FUNCTION__); break;
- }
-
- /* determine the parity */
- if (cflag & PARENB)
- if (cflag & PARODD)
- dbg("%s - parity = odd", __FUNCTION__);
- else
- dbg("%s - parity = even", __FUNCTION__);
- else
- dbg("%s - parity = none", __FUNCTION__);
-
- /* figure out the stop bits requested */
- if (cflag & CSTOPB)
- dbg("%s - stop bits = 2", __FUNCTION__);
- else
- dbg("%s - stop bits = 1", __FUNCTION__);
-
-
- /* figure out the flow control settings */
- if (cflag & CRTSCTS)
- dbg("%s - RTS/CTS is enabled", __FUNCTION__);
- else
- dbg("%s - RTS/CTS is disabled", __FUNCTION__);
-
- /* determine software flow control */
- if (I_IXOFF(port->tty))
- dbg("%s - XON/XOFF is enabled, XON = %2x, XOFF = %2x",
- __FUNCTION__, START_CHAR(port->tty), STOP_CHAR(port->tty));
- else
- dbg("%s - XON/XOFF is disabled", __FUNCTION__);
-
- /* get the baud rate wanted */
- dbg("%s - baud rate = %d", __FUNCTION__, tty_get_baud_rate(port->tty));
-
- return;
-}
-
-
static int __init visor_init (void)
{
int i, retval;
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 11:49:35 +0000