diff options
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/host/pci-quirks.c | 16 | ||||
| -rw-r--r-- | drivers/usb/host/sl811_cs.c | 4 | ||||
| -rw-r--r-- | drivers/usb/input/hid-core.c | 50 | ||||
| -rw-r--r-- | drivers/usb/misc/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/usb/misc/ldusb.c | 57 | ||||
| -rw-r--r-- | drivers/usb/serial/pl2303.c | 5 | ||||
| -rw-r--r-- | drivers/usb/serial/pl2303.h | 4 | ||||
| -rw-r--r-- | drivers/usb/storage/unusual_devs.h | 52 |
8 files changed, 127 insertions, 63 deletions
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index e9e5bc178ce..118288d9442 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -191,8 +191,9 @@ static void __devinit quirk_usb_handoff_ohci(struct pci_dev *pdev) } if (wait_time <= 0) printk(KERN_WARNING "%s %s: BIOS handoff " - "failed (BIOS bug ?)\n", - pdev->dev.bus_id, "OHCI"); + "failed (BIOS bug ?) %08x\n", + pdev->dev.bus_id, "OHCI", + readl(base + OHCI_CONTROL)); /* reset controller, preserving RWC */ writel(control & OHCI_CTRL_RWC, base + OHCI_CONTROL); @@ -243,6 +244,12 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) pr_debug("%s %s: BIOS handoff\n", pdev->dev.bus_id, "EHCI"); +#if 0 +/* aleksey_gorelov@phoenix.com reports that some systems need SMI forced on, + * but that seems dubious in general (the BIOS left it off intentionally) + * and is known to prevent some systems from booting. so we won't do this + * unless maybe we can determine when we're on a system that needs SMI forced. + */ /* BIOS workaround (?): be sure the * pre-Linux code receives the SMI */ @@ -252,6 +259,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) pci_write_config_dword(pdev, offset + EHCI_USBLEGCTLSTS, val | EHCI_USBLEGCTLSTS_SOOE); +#endif } /* always say Linux will own the hardware @@ -274,8 +282,8 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) * it down, and hope nothing goes too wrong */ printk(KERN_WARNING "%s %s: BIOS handoff " - "failed (BIOS bug ?)\n", - pdev->dev.bus_id, "EHCI"); + "failed (BIOS bug ?) %08x\n", + pdev->dev.bus_id, "EHCI", cap); pci_write_config_byte(pdev, offset + 2, 0); } diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 466384d7c79..134d2000128 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -101,7 +101,7 @@ static struct resource resources[] = { }, }; -extern struct device_driver sl811h_driver; +extern struct platform_driver sl811h_driver; static struct platform_device platform_dev = { .id = -1, @@ -132,7 +132,7 @@ static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq) * initialized already because of the link order dependency created * by referencing "sl811h_driver". */ - platform_dev.name = sl811h_driver.name; + platform_dev.name = sl811h_driver.driver.name; return platform_device_register(&platform_dev); } diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 6f7a684c3e0..772478086bd 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1435,17 +1435,20 @@ void hid_init_reports(struct hid_device *hid) #define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 #define USB_VENDOR_ID_LD 0x0f11 -#define USB_DEVICE_ID_CASSY 0x1000 -#define USB_DEVICE_ID_POCKETCASSY 0x1010 -#define USB_DEVICE_ID_MOBILECASSY 0x1020 -#define USB_DEVICE_ID_JWM 0x1080 -#define USB_DEVICE_ID_DMMP 0x1081 -#define USB_DEVICE_ID_UMIP 0x1090 -#define USB_DEVICE_ID_VIDEOCOM 0x1200 -#define USB_DEVICE_ID_COM3LAB 0x2000 -#define USB_DEVICE_ID_TELEPORT 0x2010 -#define USB_DEVICE_ID_NETWORKANALYSER 0x2020 -#define USB_DEVICE_ID_POWERCONTROL 0x2030 +#define USB_DEVICE_ID_LD_CASSY 0x1000 +#define USB_DEVICE_ID_LD_POCKETCASSY 0x1010 +#define USB_DEVICE_ID_LD_MOBILECASSY 0x1020 +#define USB_DEVICE_ID_LD_JWM 0x1080 +#define USB_DEVICE_ID_LD_DMMP 0x1081 +#define USB_DEVICE_ID_LD_UMIP 0x1090 +#define USB_DEVICE_ID_LD_XRAY1 0x1100 +#define USB_DEVICE_ID_LD_XRAY2 0x1101 +#define USB_DEVICE_ID_LD_VIDEOCOM 0x1200 +#define USB_DEVICE_ID_LD_COM3LAB 0x2000 +#define USB_DEVICE_ID_LD_TELEPORT 0x2010 +#define USB_DEVICE_ID_LD_NETWORKANALYSER 0x2020 +#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030 +#define USB_DEVICE_ID_LD_MACHINETEST 0x2040 #define USB_VENDOR_ID_APPLE 0x05ac #define USB_DEVICE_ID_APPLE_POWERMOUSE 0x0304 @@ -1491,17 +1494,20 @@ static const struct hid_blacklist { { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_LD, USB_DEVICE_ID_CASSY, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_LD, USB_DEVICE_ID_POCKETCASSY, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_LD, USB_DEVICE_ID_MOBILECASSY, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_LD, USB_DEVICE_ID_JWM, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_LD, USB_DEVICE_ID_DMMP, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_LD, USB_DEVICE_ID_UMIP, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_LD, USB_DEVICE_ID_VIDEOCOM, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_LD, USB_DEVICE_ID_COM3LAB, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_LD, USB_DEVICE_ID_TELEPORT, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_LD, USB_DEVICE_ID_NETWORKANALYSER, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_LD, USB_DEVICE_ID_POWERCONTROL, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY1, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY2, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_VIDEOCOM, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_COM3LAB, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_TELEPORT, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE }, diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 6649531fa82..8ba6a701e9c 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -141,7 +141,7 @@ source "drivers/usb/misc/sisusbvga/Kconfig" config USB_LD tristate "USB LD driver" - depends on USB && EXPERIMENTAL + depends on USB help This driver is for generic USB devices that use interrupt transfers, like LD Didactic's USB devices. diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 331d4ae949e..e2d1198623e 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -24,6 +24,7 @@ * V0.1 (mh) Initial version * V0.11 (mh) Added raw support for HID 1.0 devices (no interrupt out endpoint) * V0.12 (mh) Added kmalloc check for string buffer + * V0.13 (mh) Added support for LD X-Ray and Machine Test System */ #include <linux/config.h> @@ -40,17 +41,20 @@ /* Define these values to match your devices */ #define USB_VENDOR_ID_LD 0x0f11 /* USB Vendor ID of LD Didactic GmbH */ -#define USB_DEVICE_ID_CASSY 0x1000 /* USB Product ID for all CASSY-S modules */ -#define USB_DEVICE_ID_POCKETCASSY 0x1010 /* USB Product ID for Pocket-CASSY */ -#define USB_DEVICE_ID_MOBILECASSY 0x1020 /* USB Product ID for Mobile-CASSY */ -#define USB_DEVICE_ID_JWM 0x1080 /* USB Product ID for Joule and Wattmeter */ -#define USB_DEVICE_ID_DMMP 0x1081 /* USB Product ID for Digital Multimeter P (reserved) */ -#define USB_DEVICE_ID_UMIP 0x1090 /* USB Product ID for UMI P */ -#define USB_DEVICE_ID_VIDEOCOM 0x1200 /* USB Product ID for VideoCom */ -#define USB_DEVICE_ID_COM3LAB 0x2000 /* USB Product ID for COM3LAB */ -#define USB_DEVICE_ID_TELEPORT 0x2010 /* USB Product ID for Terminal Adapter */ -#define USB_DEVICE_ID_NETWORKANALYSER 0x2020 /* USB Product ID for Network Analyser */ -#define USB_DEVICE_ID_POWERCONTROL 0x2030 /* USB Product ID for Controlling device for Power Electronics */ +#define USB_DEVICE_ID_LD_CASSY 0x1000 /* USB Product ID of CASSY-S */ +#define USB_DEVICE_ID_LD_POCKETCASSY 0x1010 /* USB Product ID of Pocket-CASSY */ +#define USB_DEVICE_ID_LD_MOBILECASSY 0x1020 /* USB Product ID of Mobile-CASSY */ +#define USB_DEVICE_ID_LD_JWM 0x1080 /* USB Product ID of Joule and Wattmeter */ +#define USB_DEVICE_ID_LD_DMMP 0x1081 /* USB Product ID of Digital Multimeter P (reserved) */ +#define USB_DEVICE_ID_LD_UMIP 0x1090 /* USB Product ID of UMI P */ +#define USB_DEVICE_ID_LD_XRAY1 0x1100 /* USB Product ID of X-Ray Apparatus */ +#define USB_DEVICE_ID_LD_XRAY2 0x1101 /* USB Product ID of X-Ray Apparatus */ +#define USB_DEVICE_ID_LD_VIDEOCOM 0x1200 /* USB Product ID of VideoCom */ +#define USB_DEVICE_ID_LD_COM3LAB 0x2000 /* USB Product ID of COM3LAB */ +#define USB_DEVICE_ID_LD_TELEPORT 0x2010 /* USB Product ID of Terminal Adapter */ +#define USB_DEVICE_ID_LD_NETWORKANALYSER 0x2020 /* USB Product ID of Network Analyser */ +#define USB_DEVICE_ID_LD_POWERCONTROL 0x2030 /* USB Product ID of Converter Control Unit */ +#define USB_DEVICE_ID_LD_MACHINETEST 0x2040 /* USB Product ID of Machine Test System */ #define USB_VENDOR_ID_VERNIER 0x08f7 #define USB_DEVICE_ID_VERNIER_LABPRO 0x0001 @@ -67,17 +71,20 @@ /* table of devices that work with this driver */ static struct usb_device_id ld_usb_table [] = { - { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_CASSY) }, - { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_POCKETCASSY) }, - { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_MOBILECASSY) }, - { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_JWM) }, - { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_DMMP) }, - { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_UMIP) }, - { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_VIDEOCOM) }, - { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_COM3LAB) }, - { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_TELEPORT) }, - { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_NETWORKANALYSER) }, - { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_POWERCONTROL) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_JWM) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_DMMP) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_UMIP) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY1) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_XRAY2) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_VIDEOCOM) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_COM3LAB) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_TELEPORT) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) }, + { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, @@ -85,7 +92,7 @@ static struct usb_device_id ld_usb_table [] = { { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, ld_usb_table); -MODULE_VERSION("V0.12"); +MODULE_VERSION("V0.13"); MODULE_AUTHOR("Michael Hund <mhund@ld-didactic.de>"); MODULE_DESCRIPTION("LD USB Driver"); MODULE_LICENSE("GPL"); @@ -632,8 +639,8 @@ static int ld_usb_probe(struct usb_interface *intf, const struct usb_device_id * /* workaround for early firmware versions on fast computers */ if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VENDOR_ID_LD) && - ((le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_CASSY) || - (le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_COM3LAB)) && + ((le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_CASSY) || + (le16_to_cpu(udev->descriptor.idProduct) == USB_DEVICE_ID_LD_COM3LAB)) && (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x103)) { buffer = kmalloc(256, GFP_KERNEL); if (buffer == NULL) { diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index e8e575e037c..37c81c08faa 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -73,9 +73,10 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) }, { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75) }, { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) }, - { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) }, - { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID ) }, + { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) }, + { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) }, { USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) }, + { USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 1807087a76e..9bc4755162a 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -71,3 +71,7 @@ #define SAGEM_VENDOR_ID 0x079b #define SAGEM_PRODUCT_ID 0x0027 + +/* Leadtek GPS 9531 (ID 0413:2101) */ +#define LEADTEK_VENDOR_ID 0x0413 +#define LEADTEK_9531_PRODUCT_ID 0x2101 diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ee958f986eb..e71c5ca1a07 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -106,6 +106,13 @@ UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), +/* Reported by Christian Leber <christian@leber.de> */ +UNUSUAL_DEV( 0x0419, 0xaaf5, 0x0100, 0x0100, + "TrekStor", + "i.Beat 115 2.0", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE | US_FL_NOT_LOCKABLE ), + /* Reported by Stefan Werner <dustbln@gmx.de> */ UNUSUAL_DEV( 0x0419, 0xaaf6, 0x0100, 0x0100, "TrekStor", @@ -127,6 +134,14 @@ UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ), #endif +/* Patch submitted by Daniel Drake <dsd@gentoo.org> + * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */ +UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100, + "Neuros Audio", + "USB 2.0 HD 2.5", + US_SC_DEVICE, US_PR_BULK, NULL, + US_FL_NEED_OVERRIDE ), + /* * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559. * The key does not actually break, but it returns zero sense which @@ -137,13 +152,16 @@ UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100, "USB Mass Storage Device", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), -/* Patch submitted by Daniel Drake <dsd@gentoo.org> - * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */ -UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100, - "Neuros Audio", - "USB 2.0 HD 2.5", - US_SC_DEVICE, US_PR_BULK, NULL, - US_FL_NEED_OVERRIDE ), +/* +* Bohdan Linda <bohdan.linda@gmail.com> +* 1GB USB sticks MyFlash High Speed. I have restricted +* the revision to my model only +*/ +UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100, + "USB 2.0", + "Flash Disk", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_NOT_LOCKABLE ), UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101, "Rio", @@ -946,6 +964,12 @@ UNUSUAL_DEV( 0x084d, 0x0011, 0x0110, 0x0110, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_BULK32), +/* Submitted by Jan De Luyck <lkml@kcore.org> */ +UNUSUAL_DEV( 0x08bd, 0x1100, 0x0000, 0x0000, + "CITIZEN", + "X1DE-USB", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN), /* Entry needed for flags. Moreover, all devices with this ID use * bulk-only transport, but _some_ falsely report Control/Bulk instead. @@ -1085,6 +1109,13 @@ UNUSUAL_DEV( 0x0dda, 0x0301, 0x0012, 0x0012, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Jim McCloskey <mcclosk@ucsc.edu> */ +UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100, + "Cowon Systems", + "iAUDIO M5", + US_SC_DEVICE, US_PR_BULK, NULL, + 0 ), + /* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */ UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300, "USB", @@ -1162,6 +1193,13 @@ UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999, US_FL_SINGLE_LUN), #endif +/* Reported by Andrew Simmons <andrew.simmons@gmail.com> */ +UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001, + "DataStor", + "USB4500 FW1.04", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Control/Bulk transport for all SubClass values */ USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR), USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR), |