diff options
Diffstat (limited to 'drivers/usb')
61 files changed, 306 insertions, 1126 deletions
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index cb01b5106ef..b6483dd98ac 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -64,7 +64,6 @@ #include <linux/ctype.h> #include <linux/sched.h> #include <linux/kthread.h> -#include <linux/version.h> #include <linux/mutex.h> #include <linux/freezer.h> diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index efc4373eded..c257453fa9d 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -589,8 +589,8 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) tasklet_schedule(&acm->urb_task); done: -err_out: mutex_unlock(&acm->mutex); +err_out: mutex_unlock(&open_mutex); return rv; @@ -1362,6 +1362,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0803, 0x3095), /* Zoom Telephonics Model 3095F USB MODEM */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 2be37fe466f..5a7fa6f0995 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -230,6 +230,13 @@ static int usb_probe_interface(struct device *dev) */ intf->pm_usage_cnt = !(driver->supports_autosuspend); + /* Carry out a deferred switch to altsetting 0 */ + if (intf->needs_altsetting0) { + usb_set_interface(udev, intf->altsetting[0]. + desc.bInterfaceNumber, 0); + intf->needs_altsetting0 = 0; + } + error = driver->probe(intf, id); if (error) { mark_quiesced(intf); @@ -266,8 +273,17 @@ static int usb_unbind_interface(struct device *dev) driver->disconnect(intf); - /* reset other interface state */ - usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0); + /* Reset other interface state. + * We cannot do a Set-Interface if the device is suspended or + * if it is prepared for a system sleep (since installing a new + * altsetting means creating new endpoint device entries). + * When either of these happens, defer the Set-Interface. + */ + if (!error && intf->dev.power.status == DPM_ON) + usb_set_interface(udev, intf->altsetting[0]. + desc.bInterfaceNumber, 0); + else + intf->needs_altsetting0 = 1; usb_set_intfdata(intf, NULL); intf->condition = USB_INTERFACE_UNBOUND; @@ -798,7 +814,8 @@ void usb_forced_unbind_intf(struct usb_interface *intf) * The caller must hold @intf's device's lock, but not its pm_mutex * and not @intf->dev.sem. * - * FIXME: The caller must block system sleep transitions. + * Note: Rebinds will be skipped if a system sleep transition is in + * progress and the PM "complete" callback hasn't occurred yet. */ void usb_rebind_intf(struct usb_interface *intf) { @@ -814,10 +831,12 @@ void usb_rebind_intf(struct usb_interface *intf) } /* Try to rebind the interface */ - intf->needs_binding = 0; - rc = device_attach(&intf->dev); - if (rc < 0) - dev_warn(&intf->dev, "rebind failed: %d\n", rc); + if (intf->dev.power.status == DPM_ON) { + intf->needs_binding = 0; + rc = device_attach(&intf->dev); + if (rc < 0) + dev_warn(&intf->dev, "rebind failed: %d\n", rc); + } } #ifdef CONFIG_PM @@ -829,7 +848,6 @@ void usb_rebind_intf(struct usb_interface *intf) * or rebind interfaces that have been unbound, according to @action. * * The caller must hold @udev's device lock. - * FIXME: For rebinds, the caller must block system sleep transitions. */ static void do_unbind_rebind(struct usb_device *udev, int action) { @@ -851,22 +869,8 @@ static void do_unbind_rebind(struct usb_device *udev, int action) } break; case DO_REBIND: - if (intf->needs_binding) { - - /* FIXME: The next line is needed because we are going to probe - * the interface, but as far as the PM core is concerned the - * interface is still suspended. The problem wouldn't exist - * if we could rebind the interface during the interface's own - * resume() call, but at the time the usb_device isn't locked! - * - * The real solution will be to carry this out during the device's - * complete() callback. Until that is implemented, we have to - * use this hack. - */ -// intf->dev.power.sleeping = 0; - + if (intf->needs_binding) usb_rebind_intf(intf); - } break; } } @@ -926,14 +930,14 @@ static int usb_resume_device(struct usb_device *udev) } /* Caller has locked intf's usb_device's pm mutex */ -static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg) +static int usb_suspend_interface(struct usb_device *udev, + struct usb_interface *intf, pm_message_t msg) { struct usb_driver *driver; int status = 0; /* with no hardware, USB interfaces only use FREEZE and ON states */ - if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED || - !is_active(intf)) + if (udev->state == USB_STATE_NOTATTACHED || !is_active(intf)) goto done; if (intf->condition == USB_INTERFACE_UNBOUND) /* This can't happen */ @@ -944,7 +948,7 @@ static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg) status = driver->suspend(intf, msg); if (status == 0) mark_quiesced(intf); - else if (!interface_to_usbdev(intf)->auto_pm) + else if (!udev->auto_pm) dev_err(&intf->dev, "%s error %d\n", "suspend", status); } else { @@ -961,13 +965,13 @@ static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg) } /* Caller has locked intf's usb_device's pm_mutex */ -static int usb_resume_interface(struct usb_interface *intf, int reset_resume) +static int usb_resume_interface(struct usb_device *udev, + struct usb_interface *intf, int reset_resume) { struct usb_driver *driver; int status = 0; - if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED || - is_active(intf)) + if (udev->state == USB_STATE_NOTATTACHED || is_active(intf)) goto done; /* Don't let autoresume interfere with unbinding */ @@ -975,8 +979,17 @@ static int usb_resume_interface(struct usb_interface *intf, int reset_resume) goto done; /* Can't resume it if it doesn't have a driver. */ - if (intf->condition == USB_INTERFACE_UNBOUND) + if (intf->condition == USB_INTERFACE_UNBOUND) { + + /* Carry out a deferred switch to altsetting 0 */ + if (intf->needs_altsetting0 && + intf->dev.power.status == DPM_ON) { + usb_set_interface(udev, intf->altsetting[0]. + desc.bInterfaceNumber, 0); + intf->needs_altsetting0 = 0; + } goto done; + } /* Don't resume if the interface is marked for rebinding */ if (intf->needs_binding) @@ -1151,7 +1164,7 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) if (udev->actconfig) { for (; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; - status = usb_suspend_interface(intf, msg); + status = usb_suspend_interface(udev, intf, msg); if (status != 0) break; } @@ -1163,7 +1176,7 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) if (status != 0) { while (--i >= 0) { intf = udev->actconfig->interface[i]; - usb_resume_interface(intf, 0); + usb_resume_interface(udev, intf, 0); } /* Try another autosuspend when the interfaces aren't busy */ @@ -1276,7 +1289,7 @@ static int usb_resume_both(struct usb_device *udev) if (status == 0 && udev->actconfig) { for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; - usb_resume_interface(intf, udev->reset_resume); + usb_resume_interface(udev, intf, udev->reset_resume); } } @@ -1605,12 +1618,10 @@ int usb_external_resume_device(struct usb_device *udev) return status; } -static int usb_suspend(struct device *dev, pm_message_t message) +int usb_suspend(struct device *dev, pm_message_t message) { struct usb_device *udev; - if (!is_usb_device(dev)) /* Ignore PM for interfaces */ - return 0; udev = to_usb_device(dev); /* If udev is already suspended, we can skip this suspend and @@ -1629,12 +1640,10 @@ static int usb_suspend(struct device *dev, pm_message_t message) return usb_external_suspend_device(udev, message); } -static int usb_resume(struct device *dev) +int usb_resume(struct device *dev) { struct usb_device *udev; - if (!is_usb_device(dev)) /* Ignore PM for interfaces */ - return 0; udev = to_usb_device(dev); /* If udev->skip_sys_resume is set then udev was already suspended @@ -1646,17 +1655,10 @@ static int usb_resume(struct device *dev) return usb_external_resume_device(udev); } -#else - -#define usb_suspend NULL -#define usb_resume NULL - #endif /* CONFIG_PM */ struct bus_type usb_bus_type = { .name = "usb", .match = usb_device_match, .uevent = usb_uevent, - .suspend = usb_suspend, - .resume = usb_resume, }; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index f7bfd72ef11..8ab389dca2b 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -924,15 +924,6 @@ static int register_root_hub(struct usb_hcd *hcd) return retval; } -void usb_enable_root_hub_irq (struct usb_bus *bus) -{ - struct usb_hcd *hcd; - - hcd = container_of (bus, struct usb_hcd, self); - if (hcd->driver->hub_irq_enable && hcd->state != HC_STATE_HALT) - hcd->driver->hub_irq_enable (hcd); -} - /*-------------------------------------------------------------------------*/ @@ -1885,7 +1876,8 @@ int usb_add_hcd(struct usb_hcd *hcd, * with IRQF_SHARED. As usb_hcd_irq() will always disable * interrupts we can remove it here. */ - irqflags &= ~IRQF_DISABLED; + if (irqflags & IRQF_SHARED) + irqflags &= ~IRQF_DISABLED; snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 5b0b59b0d89..e710ce04e22 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -212,8 +212,6 @@ struct hc_driver { int (*bus_suspend)(struct usb_hcd *); int (*bus_resume)(struct usb_hcd *); int (*start_port_reset)(struct usb_hcd *, unsigned port_num); - void (*hub_irq_enable)(struct usb_hcd *); - /* Needed only if port-change IRQs are level-triggered */ /* force handover of high-speed port to full-speed companion */ void (*relinquish_port)(struct usb_hcd *, int); @@ -379,8 +377,6 @@ extern struct list_head usb_bus_list; extern struct mutex usb_bus_list_lock; extern wait_queue_head_t usb_kill_urb_queue; -extern void usb_enable_root_hub_irq(struct usb_bus *bus); - extern int usb_find_interface_driver(struct usb_device *dev, struct usb_interface *interface); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 107e1d25dde..d99963873e3 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2102,8 +2102,6 @@ int usb_port_resume(struct usb_device *udev) } clear_bit(port1, hub->busy_bits); - if (!hub->hdev->parent && !hub->busy_bits[0]) - usb_enable_root_hub_irq(hub->hdev->bus); status = check_port_resume_type(udev, hub, port1, status, portchange, portstatus); @@ -2685,35 +2683,17 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, USB_PORT_STAT_C_ENABLE); #endif - /* Try to use the debounce delay for protection against - * port-enable changes caused, for example, by EMI. - */ - if (portchange & (USB_PORT_STAT_C_CONNECTION | - USB_PORT_STAT_C_ENABLE)) { - status = hub_port_debounce(hub, port1); - if (status < 0) { - if (printk_ratelimit()) - dev_err (hub_dev, "connect-debounce failed, " - "port %d disabled\n", port1); - portstatus &= ~USB_PORT_STAT_CONNECTION; - } else { - portstatus = status; - } - } - /* Try to resuscitate an existing device */ udev = hdev->children[port1-1]; if ((portstatus & USB_PORT_STAT_CONNECTION) && udev && udev->state != USB_STATE_NOTATTACHED) { - usb_lock_device(udev); if (portstatus & USB_PORT_STAT_ENABLE) { status = 0; /* Nothing to do */ - } else if (!udev->persist_enabled) { - status = -ENODEV; /* Mustn't resuscitate */ #ifdef CONFIG_USB_SUSPEND - } else if (udev->state == USB_STATE_SUSPENDED) { + } else if (udev->state == USB_STATE_SUSPENDED && + udev->persist_enabled) { /* For a suspended device, treat this as a * remote wakeup event. */ @@ -2728,7 +2708,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, #endif } else { - status = usb_reset_device(udev); + status = -ENODEV; /* Don't resuscitate */ } usb_unlock_device(udev); @@ -2743,6 +2723,19 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, usb_disconnect(&hdev->children[port1-1]); clear_bit(port1, hub->change_bits); + if (portchange & (USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE)) { + status = hub_port_debounce(hub, port1); + if (status < 0) { + if (printk_ratelimit()) + dev_err(hub_dev, "connect-debounce failed, " + "port %d disabled\n", port1); + portstatus &= ~USB_PORT_STAT_CONNECTION; + } else { + portstatus = status; + } + } + /* Return now if debouncing failed or nothing is connected */ if (!(portstatus & USB_PORT_STAT_CONNECTION)) { @@ -2750,7 +2743,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2 && !(portstatus & (1 << USB_PORT_FEAT_POWER))) set_port_feature(hdev, port1, USB_PORT_FEAT_POWER); - + if (portstatus & USB_PORT_STAT_ENABLE) goto done; return; @@ -3081,11 +3074,6 @@ static void hub_events(void) } } - /* If this is a root hub, tell the HCD it's okay to - * re-enable port-change interrupts now. */ - if (!hdev->parent && !hub->busy_bits[0]) - usb_enable_root_hub_irq(hdev->bus); - loop_autopm: /* Allow autosuspend if we're not going to run again */ if (list_empty(&hub->event_list)) @@ -3311,8 +3299,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev) break; } clear_bit(port1, parent_hub->busy_bits); - if (!parent_hdev->parent && !parent_hub->busy_bits[0]) - usb_enable_root_hub_irq(parent_hdev->bus); if (ret < 0) goto re_enumerate; diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index c0b1ae25ae2..47111e88f79 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -601,15 +601,20 @@ EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs); void usb_unlink_anchored_urbs(struct usb_anchor *anchor) { struct urb *victim; + unsigned long flags; - spin_lock_irq(&anchor->lock); + spin_lock_irqsave(&anchor->lock, flags); while (!list_empty(&anchor->urb_list)) { victim = list_entry(anchor->urb_list.prev, struct urb, anchor_list); + usb_get_urb(victim); + spin_unlock_irqrestore(&anchor->lock, flags); /* this will unanchor the URB */ usb_unlink_urb(victim); + usb_put_urb(victim); + spin_lock_irqsave(&anchor->lock, flags); } - spin_unlock_irq(&anchor->lock); + spin_unlock_irqrestore(&anchor->lock, flags); } EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs); diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 84fcaa6a21e..be1fa0723f2 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -219,12 +219,6 @@ static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env) } #endif /* CONFIG_HOTPLUG */ -struct device_type usb_device_type = { - .name = "usb_device", - .release = usb_release_dev, - .uevent = usb_dev_uevent, -}; - #ifdef CONFIG_PM static int ksuspend_usb_init(void) @@ -244,13 +238,80 @@ static void ksuspend_usb_cleanup(void) destroy_workqueue(ksuspend_usb_wq); } +/* USB device Power-Management thunks. + * There's no need to distinguish here between quiescing a USB device + * and powering it down; the generic_suspend() routine takes care of + * it by skipping the usb_port_suspend() call for a quiesce. And for + * USB interfaces there's no difference at all. + */ + +static int usb_dev_prepare(struct device *dev) +{ + return 0; /* Implement eventually? */ +} + +static void usb_dev_complete(struct device *dev) +{ + /* Currently used only for rebinding interfaces */ + usb_resume(dev); /* Implement eventually? */ +} + +static int usb_dev_suspend(struct device *dev) +{ + return usb_suspend(dev, PMSG_SUSPEND); +} + +static int usb_dev_resume(struct device *dev) +{ + return usb_resume(dev); +} + +static int usb_dev_freeze(struct device *dev) +{ + return usb_suspend(dev, PMSG_FREEZE); +} + +static int usb_dev_thaw(struct device *dev) +{ + return usb_resume(dev); +} + +static int usb_dev_poweroff(struct device *dev) +{ + return usb_suspend(dev, PMSG_HIBERNATE); +} + +static int usb_dev_restore(struct device *dev) +{ + return usb_resume(dev); +} + +static struct pm_ops usb_device_pm_ops = { + .prepare = usb_dev_prepare, + .complete = usb_dev_complete, + .suspend = usb_dev_suspend, + .resume = usb_dev_resume, + .freeze = usb_dev_freeze, + .thaw = usb_dev_thaw, + .poweroff = usb_dev_poweroff, + .restore = usb_dev_restore, +}; + #else #define ksuspend_usb_init() 0 #define ksuspend_usb_cleanup() do {} while (0) +#define usb_device_pm_ops (*(struct pm_ops *)0) #endif /* CONFIG_PM */ +struct device_type usb_device_type = { + .name = "usb_device", + .release = usb_release_dev, + .uevent = usb_dev_uevent, + .pm = &usb_device_pm_ops, +}; + /* Returns 1 if @usb_bus is WUSB, 0 otherwise */ static unsigned usb_bus_is_wusb(struct usb_bus *bus) diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index d9a6e16dbf8..9a1a45ac3ad 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -41,6 +41,9 @@ extern void usb_host_cleanup(void); #ifdef CONFIG_PM +extern int usb_suspend(struct device *dev, pm_message_t msg); +extern int usb_resume(struct device *dev); + extern void usb_autosuspend_work(struct work_struct *work); extern int usb_port_suspend(struct usb_device *dev); extern int usb_port_resume(struct usb_device *dev); diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 1500e1b3c30..abf8192f89e 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -44,7 +44,6 @@ #include <linux/module.h> #include <linux/pci.h> #include <linux/kernel.h> -#include <linux/version.h> #include <linux/delay.h> #include <linux/ioport.h> #include <linux/sched.h> diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index 1cfccf102a2..45ad556169f 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -223,7 +223,7 @@ static int dr_controller_setup(struct fsl_udc *udc) fsl_writel(tmp, &dr_regs->endpointlistaddr); VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x", - (int)udc->ep_qh, (int)tmp, + udc->ep_qh, (int)tmp, fsl_readl(&dr_regs->endpointlistaddr)); /* Config PHY interface */ diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 574c53831a0..bb54cca4c54 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -787,7 +787,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel) omap_set_dma_dest_params(ep->lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, - (unsigned long) io_v2p(UDC_DATA_DMA), + UDC_DATA_DMA, 0, 0); } } else { @@ -804,7 +804,7 @@ static void dma_channel_claim(struct omap_ep *ep, unsigned channel) omap_set_dma_src_params(ep->lch, OMAP_DMA_PORT_TIPB, OMAP_DMA_AMODE_CONSTANT, - (unsigned long) io_v2p(UDC_DATA_DMA), + UDC_DATA_DMA, 0, 0); /* EMIFF or SDRC */ omap_set_dma_dest_burst_mode(ep->lch, diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index a28513ecbe5..7cbc78a6853 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -1622,7 +1622,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) struct pxa_udc *udc = the_controller; int retval; - if (!driver || driver->speed != USB_SPEED_FULL || !driver->bind + if (!driver || driver->speed < USB_SPEED_FULL || !driver->bind || !driver->disconnect || !driver->setup) return -EINVAL; if (!udc) diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 53880738459..29d13ebe750 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -35,7 +35,6 @@ #include <linux/list.h> #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <linux/version.h> #include <linux/clk.h> #include <linux/debugfs.h> diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index d9d53f289ca..8409e0705d6 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -145,16 +145,6 @@ static int handshake (struct ehci_hcd *ehci, void __iomem *ptr, return -ETIMEDOUT; } -static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr, - u32 mask, u32 done, int usec) -{ - int error = handshake(ehci, ptr, mask, done, usec); - if (error) - ehci_to_hcd(ehci)->state = HC_STATE_HALT; - - return error; -} - /* force HC to halt state from unknown (EHCI spec section 2.3) */ static int ehci_halt (struct ehci_hcd *ehci) { @@ -173,6 +163,22 @@ static int ehci_halt (struct ehci_hcd *ehci) STS_HALT, STS_HALT, 16 * 125); } +static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr, + u32 mask, u32 done, int usec) +{ + int error; + + error = handshake(ehci, ptr, mask, done, usec); + if (error) { + ehci_halt(ehci); + ehci_to_hcd(ehci)->state = HC_STATE_HALT; + ehci_err(ehci, "force halt; handhake %p %08x %08x -> %d\n", + ptr, mask, done, error); + } + + return error; +} + /* put TDI/ARC silicon into EHCI mode */ static void tdi_reset (struct ehci_hcd *ehci) { diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 5fbdc14e63b..5416cf96900 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -12,7 +12,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/mbus.h> -#include <asm/plat-orion/ehci-orion.h> +#include <plat/ehci-orion.h> #define rdl(off) __raw_readl(hcd->regs + (off)) #define wrl(off, val) __raw_writel((val), hcd->regs + (off)) diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index b7853c8bac0..4a0c5a78b2e 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -437,6 +437,9 @@ static int enable_periodic (struct ehci_hcd *ehci) u32 cmd; int status; + if (ehci->periodic_sched++) + return 0; + /* did clearing PSE did take effect yet? * takes effect only at frame boundaries... */ @@ -461,6 +464,9 @@ static int disable_periodic (struct ehci_hcd *ehci) u32 cmd; int status; + if (--ehci->periodic_sched) + return 0; + /* did setting PSE not take effect yet? * takes effect only at frame boundaries... */ @@ -544,13 +550,10 @@ static int qh_link_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) : (qh->usecs * 8); /* maybe enable periodic schedule processing */ - if (!ehci->periodic_sched++) - return enable_periodic (ehci); - - return 0; + return enable_periodic(ehci); } -static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) +static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) { unsigned i; unsigned period; @@ -586,9 +589,7 @@ static void qh_unlink_periodic (struct ehci_hcd *ehci, struct ehci_qh *qh) qh_put (qh); /* maybe turn off periodic schedule */ - ehci->periodic_sched--; - if (!ehci->periodic_sched) - (void) disable_periodic (ehci); + return disable_periodic(ehci); } static void intr_deschedule (struct ehci_hcd *ehci, struct ehci_qh *qh) @@ -1562,9 +1563,7 @@ itd_link_urb ( urb->hcpriv = NULL; timer_action (ehci, TIMER_IO_WATCHDOG); - if (unlikely (!ehci->periodic_sched++)) - return enable_periodic (ehci); - return 0; + return enable_periodic(ehci); } #define ISO_ERRS (EHCI_ISOC_BUF_ERR | EHCI_ISOC_BABBLE | EHCI_ISOC_XACTERR) @@ -1642,7 +1641,7 @@ itd_complete ( ehci_urb_done(ehci, urb, 0); retval = true; urb = NULL; - ehci->periodic_sched--; + (void) disable_periodic(ehci); ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; if (unlikely (list_empty (&stream->td_list))) { @@ -1951,9 +1950,7 @@ sitd_link_urb ( urb->hcpriv = NULL; timer_action (ehci, TIMER_IO_WATCHDOG); - if (!ehci->periodic_sched++) - return enable_periodic (ehci); - return 0; + return enable_periodic(ehci); } /*-------------------------------------------------------------------------*/ @@ -2019,7 +2016,7 @@ sitd_complete ( ehci_urb_done(ehci, urb, 0); retval = true; urb = NULL; - ehci->periodic_sched--; + (void) disable_periodic(ehci); ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; if (list_empty (&stream->td_list)) { @@ -2243,8 +2240,7 @@ restart: if (unlikely (modified)) { if (likely(ehci->periodic_sched > 0)) goto restart; - /* maybe we can short-circuit this scan! */ - disable_periodic(ehci); + /* short-circuit this scan */ now_uframe = clock; break; } diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index d22a84f86a3..8017f1cf78e 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -988,7 +988,7 @@ static void do_atl_int(struct usb_hcd *usb_hcd) /* * write bank1 address twice to ensure the 90ns delay (time * between BANK0 write and the priv_read_copy() call is at - * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 92ns) + * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 109ns) */ isp1760_writel(payload + ISP_BANK(1), usb_hcd->regs + HC_MEMORY_REG); diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 6db7a2889e6..4ed228a8994 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -260,7 +260,6 @@ static const struct hc_driver ohci_at91_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c index c0948008fe3..2ac4e022a13 100644 --- a/drivers/usb/host/ohci-au1xxx.c +++ b/drivers/usb/host/ohci-au1xxx.c @@ -163,7 +163,6 @@ static const struct hc_driver ohci_au1xxx_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index cb0b506f825..fb3055f084b 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c @@ -134,7 +134,6 @@ static struct hc_driver ohci_ep93xx_hc_driver = { .get_frame_number = ohci_get_frame, .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 439beb784f3..7ea9a7b3115 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -36,18 +36,6 @@ /*-------------------------------------------------------------------------*/ -/* hcd->hub_irq_enable() */ -static void ohci_rhsc_enable (struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - - spin_lock_irq(&ohci->lock); - if (!ohci->autostop) - del_timer(&hcd->rh_timer); /* Prevent next poll */ - ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable); - spin_unlock_irq(&ohci->lock); -} - #define OHCI_SCHED_ENABLES \ (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE) @@ -374,18 +362,28 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, int any_connected) { int poll_rh = 1; + int rhsc; + rhsc = ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC; switch (ohci->hc_control & OHCI_CTRL_HCFS) { case OHCI_USB_OPER: - /* keep on polling until we know a device is connected - * and RHSC is enabled */ + /* If no status changes are pending, enable status-change + * interrupts. + */ + if (!rhsc && !changed) { + rhsc = OHCI_INTR_RHSC; + ohci_writel(ohci, rhsc, &ohci->regs->intrenable); + } + + /* Keep on polling until we know a device is connected + * and RHSC is enabled, or until we autostop. + */ if (!ohci->autostop) { if (any_connected || !device_may_wakeup(&ohci_to_hcd(ohci) ->self.root_hub->dev)) { - if (ohci_readl(ohci, &ohci->regs->intrenable) & - OHCI_INTR_RHSC) + if (rhsc) poll_rh = 0; } else { ohci->autostop = 1; @@ -398,12 +396,13 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, ohci->autostop = 0; ohci->next_statechange = jiffies + STATECHANGE_DELAY; - } else if (time_after_eq(jiffies, + } else if (rhsc && time_after_eq(jiffies, ohci->next_statechange) && !ohci->ed_rm_list && !(ohci->hc_control & OHCI_SCHED_ENABLES)) { ohci_rh_suspend(ohci, 1); + poll_rh = 0; } } break; @@ -417,6 +416,12 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, else usb_hcd_resume_root_hub(ohci_to_hcd(ohci)); } else { + if (!rhsc && (ohci->autostop || + ohci_to_hcd(ohci)->self.root_hub-> + do_remote_wakeup)) + ohci_writel(ohci, OHCI_INTR_RHSC, + &ohci->regs->intrenable); + /* everything is idle, no need for polling */ poll_rh = 0; } @@ -438,12 +443,16 @@ static inline int ohci_rh_resume(struct ohci_hcd *ohci) static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, int any_connected) { - int poll_rh = 1; - - /* keep on polling until RHSC is enabled */ + /* If RHSC is enabled, don't poll */ if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC) - poll_rh = 0; - return poll_rh; + return 0; + + /* If no status changes are pending, enable status-change interrupts */ + if (!changed) { + ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable); + return 0; + } + return 1; } #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c index 9e31d440d11..de42283149c 100644 --- a/drivers/usb/host/ohci-lh7a404.c +++ b/drivers/usb/host/ohci-lh7a404.c @@ -193,7 +193,6 @@ static const struct hc_driver ohci_lh7a404_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 3d532b70967..95b3ec89c12 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -208,7 +208,7 @@ static int ohci_omap_init(struct usb_hcd *hcd) if (cpu_is_omap16xx()) ocpi_enable(); -#ifdef CONFIG_ARCH_OMAP_OTG +#ifdef CONFIG_USB_OTG if (need_transceiver) { ohci->transceiver = otg_get_transceiver(); if (ohci->transceiver) { @@ -470,7 +470,6 @@ static const struct hc_driver ohci_omap_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 083e8df0a81..a9c2ae36c7a 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -459,7 +459,6 @@ static const struct hc_driver ohci_pci_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c index b02cd076197..658a2a978c3 100644 --- a/drivers/usb/host/ohci-pnx4008.c +++ b/drivers/usb/host/ohci-pnx4008.c @@ -277,7 +277,6 @@ static const struct hc_driver ohci_pnx4008_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c index 605d59cba28..28467e288a9 100644 --- a/drivers/usb/host/ohci-pnx8550.c +++ b/drivers/usb/host/ohci-pnx8550.c @@ -201,7 +201,6 @@ static const struct hc_driver ohci_pnx8550_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index 91e6e101a4c..7ac53264ead 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -72,7 +72,6 @@ static const struct hc_driver ohci_ppc_of_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c index 523c3012557..cd3398b675b 100644 --- a/drivers/usb/host/ohci-ppc-soc.c +++ b/drivers/usb/host/ohci-ppc-soc.c @@ -172,7 +172,6 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c index 55c95647f00..2089d8a46c4 100644 --- a/drivers/usb/host/ohci-ps3.c +++ b/drivers/usb/host/ohci-ps3.c @@ -68,7 +68,6 @@ static const struct hc_driver ps3_ohci_hc_driver = { .get_frame_number = ohci_get_frame, .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, .start_port_reset = ohci_start_port_reset, #if defined(CONFIG_PM) .bus_suspend = ohci_bus_suspend, diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 8c9c4849db6..7f0f35c7818 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -298,7 +298,6 @@ static const struct hc_driver ohci_pxa27x_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 9e3dc4069e8..f46af7a718d 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -466,7 +466,6 @@ static const struct hc_driver ohci_s3c2410_hc_driver = { */ .hub_status_data = ohci_s3c2410_hub_status_data, .hub_control = ohci_s3c2410_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 4626b002e67..e4bbe8e188e 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -231,7 +231,6 @@ static const struct hc_driver ohci_sa1111_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c index e7ee607278f..60f03cc7ec4 100644 --- a/drivers/usb/host/ohci-sh.c +++ b/drivers/usb/host/ohci-sh.c @@ -68,7 +68,6 @@ static const struct hc_driver ohci_sh_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c index 21b164e4abe..cff23637cfc 100644 --- a/drivers/usb/host/ohci-sm501.c +++ b/drivers/usb/host/ohci-sm501.c @@ -75,7 +75,6 @@ static const struct hc_driver ohci_sm501_hc_driver = { */ .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c index 3660c83d80a..23fd6a886bd 100644 --- a/drivers/usb/host/ohci-ssb.c +++ b/drivers/usb/host/ohci-ssb.c @@ -81,7 +81,6 @@ static const struct hc_driver ssb_ohci_hc_driver = { .hub_status_data = ohci_hub_status_data, .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, #ifdef CONFIG_PM .bus_suspend = ohci_bus_suspend, .bus_resume = ohci_bus_resume, diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 20ad3c48fcb..228f2b070f2 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -2934,16 +2934,6 @@ static int u132_start_port_reset(struct usb_hcd *hcd, unsigned port_num) return 0; } -static void u132_hub_irq_enable(struct usb_hcd *hcd) -{ - struct u132 *u132 = hcd_to_u132(hcd); - if (u132->going > 1) { - dev_err(&u132->platform_dev->dev, "device has been removed %d\n" - , u132->going); - } else if (u132->going > 0) - dev_err(&u132->platform_dev->dev, "device is being removed\n"); -} - #ifdef CONFIG_PM static int u132_bus_suspend(struct usb_hcd *hcd) @@ -2995,7 +2985,6 @@ static struct hc_driver u132_hc_driver = { .bus_suspend = u132_bus_suspend, .bus_resume = u132_bus_resume, .start_port_reset = u132_start_port_reset, - .hub_irq_enable = u132_hub_irq_enable, }; /* diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index e6ca9979e3a..a4ef77ef917 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -19,7 +19,6 @@ #include <linux/slab.h> #include <linux/sched.h> #include <linux/poll.h> -#include <linux/version.h> #include <linux/usb/iowarrior.h> /* Version Information */ diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index fbace41a7cb..69c34a58e20 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3270,6 +3270,7 @@ static struct usb_device_id sisusb_table [] = { { USB_DEVICE(0x0711, 0x0900) }, { USB_DEVICE(0x0711, 0x0901) }, { USB_DEVICE(0x0711, 0x0902) }, + { USB_DEVICE(0x0711, 0x0918) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) }, { } diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index faca4333f27..58b2b8fc943 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -9,6 +9,7 @@ comment "Enable Host or Gadget support to see Inventra options" # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller config USB_MUSB_HDRC depends on (USB || USB_GADGET) && HAVE_CLK + depends on !SUPERH select TWL4030_USB if MACH_OMAP_3430SDP tristate 'Inventra Highspeed Dual Role Controller (TI, ...)' help @@ -165,12 +166,11 @@ config USB_TUSB_OMAP_DMA help Enable DMA transfers on TUSB 6010 when OMAP DMA is available. -config USB_MUSB_LOGLEVEL +config USB_MUSB_DEBUG depends on USB_MUSB_HDRC - int 'Logging Level (0 - none / 3 - annoying / ... )' - default 0 + bool "Enable debugging messages" + default n help - Set the logging level. 0 disables the debugging altogether, - although when USB_DEBUG is set the value is at least 1. - Starting at level 3, per-transfer (urb, usb_request, packet, - or dma transfer) tracing may kick in. + This enables musb debugging. To set the logging level use the debug + module parameter. Starting at level 3, per-transfer (urb, usb_request, + packet, or dma transfer) tracing may kick in. diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile index 88eb67de08a..b6af0d687a7 100644 --- a/drivers/usb/musb/Makefile +++ b/drivers/usb/musb/Makefile @@ -64,23 +64,6 @@ endif # Debugging -MUSB_DEBUG:=$(CONFIG_USB_MUSB_LOGLEVEL) - -ifeq ("$(strip $(MUSB_DEBUG))","") - ifdef CONFIG_USB_DEBUG - MUSB_DEBUG:=1 - else - MUSB_DEBUG:=0 - endif +ifeq ($(CONFIG_USB_MUSB_DEBUG),y) + EXTRA_CFLAGS += -DDEBUG endif - -ifneq ($(MUSB_DEBUG),0) - EXTRA_CFLAGS += -DDEBUG - - ifeq ($(CONFIG_PROC_FS),y) - musb_hdrc-objs += musb_procfs.o - endif - -endif - -EXTRA_CFLAGS += -DMUSB_DEBUG=$(MUSB_DEBUG) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index d68ec6daf33..128e949db47 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -100,8 +100,8 @@ #include <linux/io.h> #ifdef CONFIG_ARM -#include <asm/arch/hardware.h> -#include <asm/arch/memory.h> +#include <mach/hardware.h> +#include <mach/memory.h> #include <asm/mach-types.h> #endif @@ -114,23 +114,14 @@ -#if MUSB_DEBUG > 0 -unsigned debug = MUSB_DEBUG; -module_param(debug, uint, 0); -MODULE_PARM_DESC(debug, "initial debug message level"); - -#define MUSB_VERSION_SUFFIX "/dbg" -#endif +unsigned debug; +module_param(debug, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug message level. Default = 0"); #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia" #define DRIVER_DESC "Inventra Dual-Role USB Controller Driver" -#define MUSB_VERSION_BASE "6.0" - -#ifndef MUSB_VERSION_SUFFIX -#define MUSB_VERSION_SUFFIX "" -#endif -#define MUSB_VERSION MUSB_VERSION_BASE MUSB_VERSION_SUFFIX +#define MUSB_VERSION "6.0" #define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION @@ -2037,6 +2028,8 @@ bad_config: musb->xceiv.state = OTG_STATE_A_IDLE; status = usb_add_hcd(musb_to_hcd(musb), -1, 0); + if (status) + goto fail; DBG(1, "%s mode, status %d, devctl %02x %c\n", "HOST", status, @@ -2051,6 +2044,8 @@ bad_config: musb->xceiv.state = OTG_STATE_B_IDLE; status = musb_gadget_setup(musb); + if (status) + goto fail; DBG(1, "%s mode, status %d, dev%02x\n", is_otg_enabled(musb) ? "OTG" : "PERIPHERAL", @@ -2059,16 +2054,14 @@ bad_config: } - if (status == 0) - musb_debug_create("driver/musb_hdrc", musb); - else { + return 0; + fail: - if (musb->clock) - clk_put(musb->clock); - device_init_wakeup(dev, 0); - musb_free(musb); - return status; - } + if (musb->clock) + clk_put(musb->clock); + device_init_wakeup(dev, 0); + musb_free(musb); + return status; #ifdef CONFIG_SYSFS status = device_create_file(dev, &dev_attr_mode); @@ -2131,7 +2124,6 @@ static int __devexit musb_remove(struct platform_device *pdev) * - OTG mode: both roles are deactivated (or never-activated) */ musb_shutdown(pdev); - musb_debug_delete("driver/musb_hdrc", musb); #ifdef CONFIG_USB_MUSB_HDRC_HCD if (musb->board_mode == MUSB_HOST) usb_remove_hcd(musb_to_hcd(musb)); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index eade46d8170..82227251931 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -485,23 +485,4 @@ extern int musb_platform_get_vbus_status(struct musb *musb); extern int __init musb_platform_init(struct musb *musb); extern int musb_platform_exit(struct musb *musb); -/*-------------------------- ProcFS definitions ---------------------*/ - -struct proc_dir_entry; - -#if (MUSB_DEBUG > 0) && defined(MUSB_CONFIG_PROC_FS) -extern struct proc_dir_entry *musb_debug_create(char *name, struct musb *data); -extern void musb_debug_delete(char *name, struct musb *data); - -#else -static inline struct proc_dir_entry * -musb_debug_create(char *name, struct musb *data) -{ - return NULL; -} -static inline void musb_debug_delete(char *name, struct musb *data) -{ -} -#endif - #endif /* __MUSB_CORE_H__ */ diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h index 3bdb311e820..4d2794441b1 100644 --- a/drivers/usb/musb/musb_debug.h +++ b/drivers/usb/musb/musb_debug.h @@ -48,11 +48,7 @@ __func__, __LINE__ , ## args); \ } } while (0) -#if MUSB_DEBUG > 0 extern unsigned debug; -#else -#define debug 0 -#endif static inline int _dbg_level(unsigned l) { diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 48d7d3ccb24..a57652fff39 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -476,6 +476,7 @@ static void ep0_rxstate(struct musb *musb) return; musb->ackpend = 0; } + musb_ep_select(musb->mregs, 0); musb_writew(regs, MUSB_CSR0, tmp); } @@ -528,6 +529,7 @@ static void ep0_txstate(struct musb *musb) } /* send it out, triggering a "txpktrdy cleared" irq */ + musb_ep_select(musb->mregs, 0); musb_writew(regs, MUSB_CSR0, csr); } diff --git a/drivers/usb/musb/musb_procfs.c b/drivers/usb/musb/musb_procfs.c deleted file mode 100644 index 55e6b78bdcc..00000000000 --- a/drivers/usb/musb/musb_procfs.c +++ /dev/null @@ -1,830 +0,0 @@ -/* - * MUSB OTG driver debug support - * - * Copyright 2005 Mentor Graphics Corporation - * Copyright (C) 2005-2006 by Texas Instruments - * Copyright (C) 2006-2007 Nokia Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - */ - -#include <linux/kernel.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/uaccess.h> /* FIXME remove procfs writes */ -#include <asm/arch/hardware.h> - -#include "musb_core.h" - -#include "davinci.h" - -#ifdef CONFIG_USB_MUSB_HDRC_HCD - -static int dump_qh(struct musb_qh *qh, char *buf, unsigned max) -{ - int count; - int tmp; - struct usb_host_endpoint *hep = qh->hep; - struct urb *urb; - - count = snprintf(buf, max, " qh %p dev%d ep%d%s max%d\n", - qh, qh->dev->devnum, qh->epnum, - ({ char *s; switch (qh->type) { - case USB_ENDPOINT_XFER_BULK: - s = "-bulk"; break; - case USB_ENDPOINT_XFER_INT: - s = "-int"; break; - case USB_ENDPOINT_XFER_CONTROL: - s = ""; break; - default: - s = "iso"; break; - }; s; }), - qh->maxpacket); - if (count <= 0) - return 0; - buf += count; - max -= count; - - list_for_each_entry(urb, &hep->urb_list, urb_list) { - tmp = snprintf(buf, max, "\t%s urb %p %d/%d\n", - usb_pipein(urb->pipe) ? "in" : "out", - urb, urb->actual_length, - urb->transfer_buffer_length); - if (tmp <= 0) - break; - tmp = min(tmp, (int)max); - count += tmp; - buf += tmp; - max -= tmp; - } - return count; -} - -static int -dump_queue(struct list_head *q, char *buf, unsigned max) -{ - int count = 0; - struct musb_qh *qh; - - list_for_each_entry(qh, q, ring) { - int tmp; - - tmp = dump_qh(qh, buf, max); - if (tmp <= 0) - break; - tmp = min(tmp, (int)max); - count += tmp; - buf += tmp; - max -= tmp; - } - return count; -} - -#endif /* HCD */ - -#ifdef CONFIG_USB_GADGET_MUSB_HDRC -static int dump_ep(struct musb_ep *ep, char *buffer, unsigned max) -{ - char *buf = buffer; - int code = 0; - void __iomem *regs = ep->hw_ep->regs; - char *mode = "1buf"; - - if (ep->is_in) { - if (ep->hw_ep->tx_double_buffered) - mode = "2buf"; - } else { - if (ep->hw_ep->rx_double_buffered) - mode = "2buf"; - } - - do { - struct usb_request *req; - - code = snprintf(buf, max, - "\n%s (hw%d): %s%s, csr %04x maxp %04x\n", - ep->name, ep->current_epnum, - mode, ep->dma ? " dma" : "", - musb_readw(regs, - (ep->is_in || !ep->current_epnum) - ? MUSB_TXCSR - : MUSB_RXCSR), - musb_readw(regs, ep->is_in - ? MUSB_TXMAXP - : MUSB_RXMAXP) - ); - if (code <= 0) - break; - code = min(code, (int) max); - buf += code; - max -= code; - - if (is_cppi_enabled() && ep->current_epnum) { - unsigned cppi = ep->current_epnum - 1; - void __iomem *base = ep->musb->ctrl_base; - unsigned off1 = cppi << 2; - void __iomem *ram = base; - char tmp[16]; - - if (ep->is_in) { - ram += DAVINCI_TXCPPI_STATERAM_OFFSET(cppi); - tmp[0] = 0; - } else { - ram += DAVINCI_RXCPPI_STATERAM_OFFSET(cppi); - snprintf(tmp, sizeof tmp, "%d left, ", - musb_readl(base, - DAVINCI_RXCPPI_BUFCNT0_REG + off1)); - } - - code = snprintf(buf, max, "%cX DMA%d: %s" - "%08x %08x, %08x %08x; " - "%08x %08x %08x .. %08x\n", - ep->is_in ? 'T' : 'R', - ep->current_epnum - 1, tmp, - musb_readl(ram, 0 * 4), - musb_readl(ram, 1 * 4), - musb_readl(ram, 2 * 4), - musb_readl(ram, 3 * 4), - musb_readl(ram, 4 * 4), - musb_readl(ram, 5 * 4), - musb_readl(ram, 6 * 4), - musb_readl(ram, 7 * 4)); - if (code <= 0) - break; - code = min(code, (int) max); - buf += code; - max -= code; - } - - if (list_empty(&ep->req_list)) { - code = snprintf(buf, max, "\t(queue empty)\n"); - if (code <= 0) - break; - code = min(code, (int) max); - buf += code; - max -= code; - break; - } - list_for_each_entry(req, &ep->req_list, list) { - code = snprintf(buf, max, "\treq %p, %s%s%d/%d\n", - req, - req->zero ? "zero, " : "", - req->short_not_ok ? "!short, " : "", - req->actual, req->length); - if (code <= 0) - break; - code = min(code, (int) max); - buf += code; - max -= code; - } - } while (0); - return buf - buffer; -} -#endif - -static int -dump_end_info(struct musb *musb, u8 epnum, char *aBuffer, unsigned max) -{ - int code = 0; - char *buf = aBuffer; - struct musb_hw_ep *hw_ep = &musb->endpoints[epnum]; - - do { - musb_ep_select(musb->mregs, epnum); -#ifdef CONFIG_USB_MUSB_HDRC_HCD - if (is_host_active(musb)) { - int dump_rx, dump_tx; - void __iomem *regs = hw_ep->regs; - - /* TEMPORARY (!) until we have a real periodic - * schedule tree ... - */ - if (!epnum) { - /* control is shared, uses RX queue - * but (mostly) shadowed tx registers - */ - dump_tx = !list_empty(&musb->control); - dump_rx = 0; - } else if (hw_ep == musb->bulk_ep) { - dump_tx = !list_empty(&musb->out_bulk); - dump_rx = !list_empty(&musb->in_bulk); - } else if (musb->periodic[epnum]) { - struct usb_host_endpoint *hep; - - hep = musb->periodic[epnum]->hep; - dump_rx = hep->desc.bEndpointAddress - & USB_ENDPOINT_DIR_MASK; - dump_tx = !dump_rx; - } else - break; - /* END TEMPORARY */ - - - if (dump_rx) { - code = snprintf(buf, max, - "\nRX%d: %s rxcsr %04x interval %02x " - "max %04x type %02x; " - "dev %d hub %d port %d" - "\n", - epnum, - hw_ep->rx_double_buffered - ? "2buf" : "1buf", - musb_readw(regs, MUSB_RXCSR), - musb_readb(regs, MUSB_RXINTERVAL), - musb_readw(regs, MUSB_RXMAXP), - musb_readb(regs, MUSB_RXTYPE), - /* FIXME: assumes multipoint */ - musb_readb(musb->mregs, - MUSB_BUSCTL_OFFSET(epnum, - MUSB_RXFUNCADDR)), - musb_readb(musb->mregs, - MUSB_BUSCTL_OFFSET(epnum, - MUSB_RXHUBADDR)), - musb_readb(musb->mregs, - MUSB_BUSCTL_OFFSET(epnum, - MUSB_RXHUBPORT)) - ); - if (code <= 0) - break; - code = min(code, (int) max); - buf += code; - max -= code; - - if (is_cppi_enabled() - && epnum - && hw_ep->rx_channel) { - unsigned cppi = epnum - 1; - unsigned off1 = cppi << 2; - void __iomem *base; - void __iomem *ram; - char tmp[16]; - - base = musb->ctrl_base; - ram = DAVINCI_RXCPPI_STATERAM_OFFSET( - cppi) + base; - snprintf(tmp, sizeof tmp, "%d left, ", - musb_readl(base, - DAVINCI_RXCPPI_BUFCNT0_REG - + off1)); - - code = snprintf(buf, max, - " rx dma%d: %s" - "%08x %08x, %08x %08x; " - "%08x %08x %08x .. %08x\n", - cppi, tmp, - musb_readl(ram, 0 * 4), - musb_readl(ram, 1 * 4), - musb_readl(ram, 2 * 4), - musb_readl(ram, 3 * 4), - musb_readl(ram, 4 * 4), - musb_readl(ram, 5 * 4), - musb_readl(ram, 6 * 4), - musb_readl(ram, 7 * 4)); - if (code <= 0) - break; - code = min(code, (int) max); - buf += code; - max -= code; - } - - if (hw_ep == musb->bulk_ep - && !list_empty( - &musb->in_bulk)) { - code = dump_queue(&musb->in_bulk, - buf, max); - if (code <= 0) - break; - code = min(code, (int) max); - buf += code; - max -= code; - } else if (musb->periodic[epnum]) { - code = dump_qh(musb->periodic[epnum], - buf, max); - if (code <= 0) - break; - code = min(code, (int) max); - buf += code; - max -= code; - } - } - - if (dump_tx) { - code = snprintf(buf, max, - "\nTX%d: %s txcsr %04x interval %02x " - "max %04x type %02x; " - "dev %d hub %d port %d" - "\n", - epnum, - hw_ep->tx_double_buffered - ? "2buf" : "1buf", - musb_readw(regs, MUSB_TXCSR), - musb_readb(regs, MUSB_TXINTERVAL), - musb_readw(regs, MUSB_TXMAXP), - musb_readb(regs, MUSB_TXTYPE), - /* FIXME: assumes multipoint */ - musb_readb(musb->mregs, - MUSB_BUSCTL_OFFSET(epnum, - MUSB_TXFUNCADDR)), - musb_readb(musb->mregs, - MUSB_BUSCTL_OFFSET(epnum, - MUSB_TXHUBADDR)), - musb_readb(musb->mregs, - MUSB_BUSCTL_OFFSET(epnum, - MUSB_TXHUBPORT)) - ); - if (code <= 0) - break; - code = min(code, (int) max); - buf += code; - max -= code; - - if (is_cppi_enabled() - && epnum - && hw_ep->tx_channel) { - unsigned cppi = epnum - 1; - void __iomem *base; - void __iomem *ram; - - base = musb->ctrl_base; - ram = DAVINCI_RXCPPI_STATERAM_OFFSET( - cppi) + base; - code = snprintf(buf, max, - " tx dma%d: " - "%08x %08x, %08x %08x; " - "%08x %08x %08x .. %08x\n", - cppi, - musb_readl(ram, 0 * 4), - musb_readl(ram, 1 * 4), - musb_readl(ram, 2 * 4), - musb_readl(ram, 3 * 4), - musb_readl(ram, 4 * 4), - musb_readl(ram, 5 * 4), - musb_readl(ram, 6 * 4), - musb_readl(ram, 7 * 4)); - if (code <= 0) - break; - code = min(code, (int) max); - buf += code; - max -= code; - } - - if (hw_ep == musb->control_ep - && !list_empty( - &musb->control)) { - code = dump_queue(&musb->control, - buf, max); - if (code <= 0) - break; - code = min(code, (int) max); - buf += code; - max -= code; - } else if (hw_ep == musb->bulk_ep - && !list_empty( - &musb->out_bulk)) { - code = dump_queue(&musb->out_bulk, - buf, max); - if (code <= 0) - break; - code = min(code, (int) max); - buf += code; - max -= code; - } else if (musb->periodic[epnum]) { - code = dump_qh(musb->periodic[epnum], - buf, max); - if (code <= 0) - break; - code = min(code, (int) max); - buf += code; - max -= code; - } - } - } -#endif -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - if (is_peripheral_active(musb)) { - code = 0; - - if (hw_ep->ep_in.desc || !epnum) { - code = dump_ep(&hw_ep->ep_in, buf, max); - if (code <= 0) - break; - code = min(code, (int) max); - buf += code; - max -= code; - } - if (hw_ep->ep_out.desc) { - code = dump_ep(&hw_ep->ep_out, buf, max); - if (code <= 0) - break; - code = min(code, (int) max); - buf += code; - max -= code; - } - } -#endif - } while (0); - - return buf - aBuffer; -} - -/* Dump the current status and compile options. - * @param musb the device driver instance - * @param buffer where to dump the status; it must be big enough to hold the - * result otherwise "BAD THINGS HAPPENS(TM)". - */ -static int dump_header_stats(struct musb *musb, char *buffer) -{ - int code, count = 0; - const void __iomem *mbase = musb->mregs; - - *buffer = 0; - count = sprintf(buffer, "Status: %sHDRC, Mode=%s " - "(Power=%02x, DevCtl=%02x)\n", - (musb->is_multipoint ? "M" : ""), MUSB_MODE(musb), - musb_readb(mbase, MUSB_POWER), - musb_readb(mbase, MUSB_DEVCTL)); - if (count <= 0) - return 0; - buffer += count; - - code = sprintf(buffer, "OTG state: %s; %sactive\n", - otg_state_string(musb), - musb->is_active ? "" : "in"); - if (code <= 0) - goto done; - buffer += code; - count += code; - - code = sprintf(buffer, - "Options: " -#ifdef CONFIG_MUSB_PIO_ONLY - "pio" -#elif defined(CONFIG_USB_TI_CPPI_DMA) - "cppi-dma" -#elif defined(CONFIG_USB_INVENTRA_DMA) - "musb-dma" -#elif defined(CONFIG_USB_TUSB_OMAP_DMA) - "tusb-omap-dma" -#else - "?dma?" -#endif - ", " -#ifdef CONFIG_USB_MUSB_OTG - "otg (peripheral+host)" -#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) - "peripheral" -#elif defined(CONFIG_USB_MUSB_HDRC_HCD) - "host" -#endif - ", debug=%d [eps=%d]\n", - debug, - musb->nr_endpoints); - if (code <= 0) - goto done; - count += code; - buffer += code; - -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - code = sprintf(buffer, "Peripheral address: %02x\n", - musb_readb(musb->ctrl_base, MUSB_FADDR)); - if (code <= 0) - goto done; - buffer += code; - count += code; -#endif - -#ifdef CONFIG_USB_MUSB_HDRC_HCD - code = sprintf(buffer, "Root port status: %08x\n", - musb->port1_status); - if (code <= 0) - goto done; - buffer += code; - count += code; -#endif - -#ifdef CONFIG_ARCH_DAVINCI - code = sprintf(buffer, - "DaVinci: ctrl=%02x stat=%1x phy=%03x\n" - "\trndis=%05x auto=%04x intsrc=%08x intmsk=%08x" - "\n", - musb_readl(musb->ctrl_base, DAVINCI_USB_CTRL_REG), - musb_readl(musb->ctrl_base, DAVINCI_USB_STAT_REG), - __raw_readl((void __force __iomem *) - IO_ADDRESS(USBPHY_CTL_PADDR)), - musb_readl(musb->ctrl_base, DAVINCI_RNDIS_REG), - musb_readl(musb->ctrl_base, DAVINCI_AUTOREQ_REG), - musb_readl(musb->ctrl_base, - DAVINCI_USB_INT_SOURCE_REG), - musb_readl(musb->ctrl_base, - DAVINCI_USB_INT_MASK_REG)); - if (code <= 0) - goto done; - count += code; - buffer += code; -#endif /* DAVINCI */ - -#ifdef CONFIG_USB_TUSB6010 - code = sprintf(buffer, - "TUSB6010: devconf %08x, phy enable %08x drive %08x" - "\n\totg %03x timer %08x" - "\n\tprcm conf %08x mgmt %08x; int src %08x mask %08x" - "\n", - musb_readl(musb->ctrl_base, TUSB_DEV_CONF), - musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL_ENABLE), - musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL), - musb_readl(musb->ctrl_base, TUSB_DEV_OTG_STAT), - musb_readl(musb->ctrl_base, TUSB_DEV_OTG_TIMER), - musb_readl(musb->ctrl_base, TUSB_PRCM_CONF), - musb_readl(musb->ctrl_base, TUSB_PRCM_MNGMT), - musb_readl(musb->ctrl_base, TUSB_INT_SRC), - musb_readl(musb->ctrl_base, TUSB_INT_MASK)); - if (code <= 0) - goto done; - count += code; - buffer += code; -#endif /* DAVINCI */ - - if (is_cppi_enabled() && musb->dma_controller) { - code = sprintf(buffer, - "CPPI: txcr=%d txsrc=%01x txena=%01x; " - "rxcr=%d rxsrc=%01x rxena=%01x " - "\n", - musb_readl(musb->ctrl_base, - DAVINCI_TXCPPI_CTRL_REG), - musb_readl(musb->ctrl_base, - DAVINCI_TXCPPI_RAW_REG), - musb_readl(musb->ctrl_base, - DAVINCI_TXCPPI_INTENAB_REG), - musb_readl(musb->ctrl_base, - DAVINCI_RXCPPI_CTRL_REG), - musb_readl(musb->ctrl_base, - DAVINCI_RXCPPI_RAW_REG), - musb_readl(musb->ctrl_base, - DAVINCI_RXCPPI_INTENAB_REG)); - if (code <= 0) - goto done; - count += code; - buffer += code; - } - -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - if (is_peripheral_enabled(musb)) { - code = sprintf(buffer, "Gadget driver: %s\n", - musb->gadget_driver - ? musb->gadget_driver->driver.name - : "(none)"); - if (code <= 0) - goto done; - count += code; - buffer += code; - } -#endif - -done: - return count; -} - -/* Write to ProcFS - * - * C soft-connect - * c soft-disconnect - * I enable HS - * i disable HS - * s stop session - * F force session (OTG-unfriendly) - * E rElinquish bus (OTG) - * H request host mode - * h cancel host request - * T start sending TEST_PACKET - * D<num> set/query the debug level - */ -static int musb_proc_write(struct file *file, const char __user *buffer, - unsigned long count, void *data) -{ - char cmd; - u8 reg; - struct musb *musb = (struct musb *)data; - void __iomem *mbase = musb->mregs; - - /* MOD_INC_USE_COUNT; */ - - if (unlikely(copy_from_user(&cmd, buffer, 1))) - return -EFAULT; - - switch (cmd) { - case 'C': - if (mbase) { - reg = musb_readb(mbase, MUSB_POWER) - | MUSB_POWER_SOFTCONN; - musb_writeb(mbase, MUSB_POWER, reg); - } - break; - - case 'c': - if (mbase) { - reg = musb_readb(mbase, MUSB_POWER) - & ~MUSB_POWER_SOFTCONN; - musb_writeb(mbase, MUSB_POWER, reg); - } - break; - - case 'I': - if (mbase) { - reg = musb_readb(mbase, MUSB_POWER) - | MUSB_POWER_HSENAB; - musb_writeb(mbase, MUSB_POWER, reg); - } - break; - - case 'i': - if (mbase) { - reg = musb_readb(mbase, MUSB_POWER) - & ~MUSB_POWER_HSENAB; - musb_writeb(mbase, MUSB_POWER, reg); - } - break; - - case 'F': - reg = musb_readb(mbase, MUSB_DEVCTL); - reg |= MUSB_DEVCTL_SESSION; - musb_writeb(mbase, MUSB_DEVCTL, reg); - break; - - case 'H': - if (mbase) { - reg = musb_readb(mbase, MUSB_DEVCTL); - reg |= MUSB_DEVCTL_HR; - musb_writeb(mbase, MUSB_DEVCTL, reg); - /* MUSB_HST_MODE( ((struct musb*)data) ); */ - /* WARNING("Host Mode\n"); */ - } - break; - - case 'h': - if (mbase) { - reg = musb_readb(mbase, MUSB_DEVCTL); - reg &= ~MUSB_DEVCTL_HR; - musb_writeb(mbase, MUSB_DEVCTL, reg); - } - break; - - case 'T': - if (mbase) { - musb_load_testpacket(musb); - musb_writeb(mbase, MUSB_TESTMODE, - MUSB_TEST_PACKET); - } - break; - -#if (MUSB_DEBUG > 0) - /* set/read debug level */ - case 'D':{ - if (count > 1) { - char digits[8], *p = digits; - int i = 0, level = 0, sign = 1; - int len = min(count - 1, (unsigned long)8); - - if (copy_from_user(&digits, &buffer[1], len)) - return -EFAULT; - - /* optional sign */ - if (*p == '-') { - len -= 1; - sign = -sign; - p++; - } - - /* read it */ - while (i++ < len && *p > '0' && *p < '9') { - level = level * 10 + (*p - '0'); - p++; - } - - level *= sign; - DBG(1, "debug level %d\n", level); - debug = level; - } - } - break; - - - case '?': - INFO("?: you are seeing it\n"); - INFO("C/c: soft connect enable/disable\n"); - INFO("I/i: hispeed enable/disable\n"); - INFO("F: force session start\n"); - INFO("H: host mode\n"); - INFO("T: start sending TEST_PACKET\n"); - INFO("D: set/read dbug level\n"); - break; -#endif - - default: - ERR("Command %c not implemented\n", cmd); - break; - } - - musb_platform_try_idle(musb, 0); - - return count; -} - -static int musb_proc_read(char *page, char **start, - off_t off, int count, int *eof, void *data) -{ - char *buffer = page; - int code = 0; - unsigned long flags; - struct musb *musb = data; - unsigned epnum; - - count -= off; - count -= 1; /* for NUL at end */ - if (count <= 0) - return -EINVAL; - - spin_lock_irqsave(&musb->lock, flags); - - code = dump_header_stats(musb, buffer); - if (code > 0) { - buffer += code; - count -= code; - } - - /* generate the report for the end points */ - /* REVISIT ... not unless something's connected! */ - for (epnum = 0; count >= 0 && epnum < musb->nr_endpoints; - epnum++) { - code = dump_end_info(musb, epnum, buffer, count); - if (code > 0) { - buffer += code; - count -= code; - } - } - - musb_platform_try_idle(musb, 0); - - spin_unlock_irqrestore(&musb->lock, flags); - *eof = 1; - - return buffer - page; -} - -void __devexit musb_debug_delete(char *name, struct musb *musb) -{ - if (musb->proc_entry) - remove_proc_entry(name, NULL); -} - -struct proc_dir_entry *__init -musb_debug_create(char *name, struct musb *data) -{ - struct proc_dir_entry *pde; - - /* FIXME convert everything to seq_file; then later, debugfs */ - - if (!name) - return NULL; - - pde = create_proc_entry(name, S_IFREG | S_IRUGO | S_IWUSR, NULL); - data->proc_entry = pde; - if (pde) { - pde->data = data; - /* pde->owner = THIS_MODULE; */ - - pde->read_proc = musb_proc_read; - pde->write_proc = musb_proc_write; - - pde->size = 0; - - pr_debug("Registered /proc/%s\n", name); - } else { - pr_debug("Cannot create a valid proc file entry"); - } - - return pde; -} diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 298b22e6ad0..9d2dcb121c5 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -35,8 +35,8 @@ #include <linux/io.h> #include <asm/mach-types.h> -#include <asm/arch/hardware.h> -#include <asm/arch/mux.h> +#include <mach/hardware.h> +#include <mach/mux.h> #include "musb_core.h" #include "omap2430.h" diff --git a/drivers/usb/musb/omap2430.h b/drivers/usb/musb/omap2430.h index 786a62071f7..dc7670718cd 100644 --- a/drivers/usb/musb/omap2430.h +++ b/drivers/usb/musb/omap2430.h @@ -11,8 +11,8 @@ #define __MUSB_OMAP243X_H__ #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) -#include <asm/arch/hardware.h> -#include <asm/arch/usb.h> +#include <mach/hardware.h> +#include <mach/usb.h> /* * OMAP2430-specific definitions diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 7b74238ad1c..e980766bb84 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -161,7 +161,7 @@ static int usb_console_setup(struct console *co, char *options) if (serial->type->set_termios) { termios->c_cflag = cflag; tty_termios_encode_baud_rate(termios, baud, baud); - serial->type->set_termios(NULL, port, &dummy); + serial->type->set_termios(tty, port, &dummy); port->port.tty = NULL; kfree(termios); diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 442cba69cce..1279553381e 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -72,6 +72,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */ { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ + { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ @@ -83,6 +84,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ + { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ @@ -93,6 +95,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ + { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { } /* Terminating Entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 984f6eff4c4..3dc93b542b3 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -654,6 +654,9 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 382265bba96..8a5b6df3a97 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -750,6 +750,7 @@ #define PAPOUCH_VID 0x5050 /* Vendor ID */ #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ +#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ /* * ACG Identification Technologies GmbH products (http://www.acg.de/). @@ -838,6 +839,10 @@ /* Rig Expert Ukraine devices */ #define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ +/* Domintell products http://www.domintell.com */ +#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ +#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 2e663f1afd5..d9538208807 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -38,8 +38,6 @@ #include <linux/usb.h> #include <linux/usb/serial.h> -#include <linux/version.h> - /* the mode to be set when the port ist opened */ static int initial_mode = 1; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index e143198aeb0..73f8277f88f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -173,6 +173,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define KYOCERA_PRODUCT_KPC680 0x180a #define ANYDATA_VENDOR_ID 0x16d5 +#define ANYDATA_PRODUCT_ADU_620UW 0x6202 #define ANYDATA_PRODUCT_ADU_E100A 0x6501 #define ANYDATA_PRODUCT_ADU_500A 0x6502 @@ -217,6 +218,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po /* ZTE PRODUCTS */ #define ZTE_VENDOR_ID 0x19d2 #define ZTE_PRODUCT_MF628 0x0015 +#define ZTE_PRODUCT_CDMA_TECH 0xfffe static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, @@ -318,6 +320,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(DELL_VENDOR_ID, 0x8138) }, /* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, + { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) }, @@ -345,6 +348,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, + { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 706033753ad..ea1a103c99b 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -14,7 +14,7 @@ Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org> */ -#define DRIVER_VERSION "v.1.2.13a" +#define DRIVER_VERSION "v.1.3.2" #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>" #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" @@ -30,9 +30,6 @@ #define SWIMS_USB_REQUEST_SetPower 0x00 #define SWIMS_USB_REQUEST_SetNmea 0x07 -#define SWIMS_USB_REQUEST_SetMode 0x0B -#define SWIMS_USB_REQUEST_GetSwocInfo 0x0A -#define SWIMS_SET_MODE_Modem 0x0001 /* per port private data */ #define N_IN_URB 4 @@ -163,7 +160,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ - { USB_DEVICE(0x0f30, 0x1b1d) }, /* Sierra Wireless MC5720 */ + { USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */ { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */ { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ @@ -175,6 +172,8 @@ static struct usb_device_id id_table [] = { /* Sierra Wireless Device */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) }, { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */ + { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */ + { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */ @@ -187,6 +186,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */ { USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */ { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */ + { USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */ { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */ { USB_DEVICE(0x1199, 0x683C) }, /* Sierra Wireless MC8790 */ { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8790 */ @@ -204,6 +204,8 @@ static struct usb_device_id id_table [] = { /* Sierra Wireless Device */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)}, /* Sierra Wireless Device */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)}, + /* Sierra Wireless Device */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)}, { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index e39c779e416..9a3e495c769 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -1744,7 +1744,7 @@ static int ti_download_firmware(struct ti_device *tdev, int type) if (buffer) { memcpy(buffer, fw_p->data, fw_p->size); memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size); - ti_do_download(dev, pipe, buffer, fw_p->size); + status = ti_do_download(dev, pipe, buffer, fw_p->size); kfree(buffer); } release_firmware(fw_p); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index b157c48e8b7..4f7f9e3ae0a 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -733,7 +733,9 @@ int usb_serial_probe(struct usb_interface *interface, ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) && (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) || ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) && - (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID))) { + (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) || + ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) && + (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) { if (interface != dev->actconfig->interface[0]) { /* check out the endpoints of the other interface*/ iface_desc = dev->actconfig->interface[0]->cur_altsetting; diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index c76034672c1..3d9249632ae 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -146,18 +146,6 @@ config USB_STORAGE_KARMA on the resulting scsi device node returns the Karma to normal operation. -config USB_STORAGE_SIERRA - bool "Sierra Wireless TRU-Install Feature Support" - depends on USB_STORAGE - help - Say Y here to include additional code to support Sierra Wireless - products with the TRU-Install feature (e.g., AC597E, AC881U). - - This code switches the Sierra Wireless device from being in - Mass Storage mode to Modem mode. It also has the ability to - support host software upgrades should full Linux support be added - to TRU-Install. - config USB_STORAGE_CYPRESS_ATACB bool "SAT emulation on Cypress USB/ATA Bridge with ATACB" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index bc3415b475c..7f8beb5366a 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -21,11 +21,10 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o -usb-storage-obj-$(CONFIG_USB_STORAGE_SIERRA) += sierra_ms.o usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ - initializers.o $(usb-storage-obj-y) + initializers.o sierra_ms.o $(usb-storage-obj-y) ifneq ($(CONFIG_USB_LIBUSUAL),) obj-$(CONFIG_USB) += libusual.o diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ba412e68d47..cd155475cb6 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -160,6 +160,13 @@ UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_MAX_SECTORS_64 ), +/* Reported by Filip Joelsson <filip@blueturtle.nu> */ +UNUSUAL_DEV( 0x0421, 0x005d, 0x0001, 0x0600, + "Nokia", + "Nokia 3110c", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Mario Rettig <mariorettig@web.de> */ UNUSUAL_DEV( 0x0421, 0x042e, 0x0100, 0x0100, "Nokia", @@ -232,6 +239,20 @@ UNUSUAL_DEV( 0x0421, 0x04b9, 0x0551, 0x0551, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Richard Nauber <RichardNauber@web.de> */ +UNUSUAL_DEV( 0x0421, 0x04fa, 0x0601, 0x0601, + "Nokia", + "6300", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + +/* Patch for Nokia 5310 capacity */ +UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591, + "Nokia", + "5310", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, "SMSC", @@ -987,6 +1008,13 @@ UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Adrian Pilchowiec <adi1981@epf.pl> */ +UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000, + "RockChip", + "MP3", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), + /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com> * This USB MP3/AVI player device fails and disconnects if more than 128 * sectors (64kB) are read/written in a single command, and may be present @@ -1576,7 +1604,6 @@ UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, 0), -#ifdef CONFIG_USB_STORAGE_SIERRA /* Reported by Kevin Lloyd <linux@sierrawireless.com> * Entry is needed for the initializer function override, * which instructs the device to load as a modem @@ -1587,7 +1614,6 @@ UNUSUAL_DEV( 0x1199, 0x0fff, 0x0000, 0x9999, "USB MMC Storage", US_SC_DEVICE, US_PR_DEVICE, sierra_ms_init, 0), -#endif /* Reported by Jaco Kroon <jaco@kroon.co.za> * The usb-storage module found on the Digitech GNX4 (and supposedly other diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 73679aa506d..27016fd2cad 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -102,9 +102,7 @@ #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB #include "cypress_atacb.h" #endif -#ifdef CONFIG_USB_STORAGE_SIERRA #include "sierra_ms.h" -#endif /* Some informational data */ MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>"); |