diff options
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-da8xx.c | 456 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-hcd.c | 5 |
3 files changed, 462 insertions, 0 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index b92b086d550..2859472996a 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -40,6 +40,7 @@ config USB_ARCH_HAS_OHCI default y if ARCH_PNX4008 && I2C default y if MFD_TC6393XB default y if ARCH_W90X900 + default y if ARCH_DAVINCI_DA8XX # PPC: default y if STB03xxx default y if PPC_MPC52xx diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c new file mode 100644 index 00000000000..4aa08d36d07 --- /dev/null +++ b/drivers/usb/host/ohci-da8xx.c @@ -0,0 +1,456 @@ +/* + * OHCI HCD (Host Controller Driver) for USB. + * + * TI DA8xx (OMAP-L1x) Bus Glue + * + * Derived from: ohci-omap.c and ohci-s3c2410.c + * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/platform_device.h> +#include <linux/clk.h> + +#include <mach/da8xx.h> +#include <mach/usb.h> + +#ifndef CONFIG_ARCH_DAVINCI_DA8XX +#error "This file is DA8xx bus glue. Define CONFIG_ARCH_DAVINCI_DA8XX." +#endif + +#define CFGCHIP2 DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG) + +static struct clk *usb11_clk; +static struct clk *usb20_clk; + +/* Over-current indicator change bitmask */ +static volatile u16 ocic_mask; + +static void ohci_da8xx_clock(int on) +{ + u32 cfgchip2; + + cfgchip2 = __raw_readl(CFGCHIP2); + if (on) { + clk_enable(usb11_clk); + + /* + * If USB 1.1 reference clock is sourced from USB 2.0 PHY, we + * need to enable the USB 2.0 module clocking, start its PHY, + * and not allow it to stop the clock during USB 2.0 suspend. + */ + if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX)) { + clk_enable(usb20_clk); + + cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN); + cfgchip2 |= CFGCHIP2_PHY_PLLON; + __raw_writel(cfgchip2, CFGCHIP2); + + pr_info("Waiting for USB PHY clock good...\n"); + while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD)) + cpu_relax(); + } + + /* Enable USB 1.1 PHY */ + cfgchip2 |= CFGCHIP2_USB1SUSPENDM; + } else { + clk_disable(usb11_clk); + if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX)) + clk_disable(usb20_clk); + + /* Disable USB 1.1 PHY */ + cfgchip2 &= ~CFGCHIP2_USB1SUSPENDM; + } + __raw_writel(cfgchip2, CFGCHIP2); +} + +/* + * Handle the port over-current indicator change. + */ +static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub, + unsigned port) +{ + ocic_mask |= 1 << port; + + /* Once over-current is detected, the port needs to be powered down */ + if (hub->get_oci(port) > 0) + hub->set_power(port, 0); +} + +static int ohci_da8xx_init(struct usb_hcd *hcd) +{ + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev->platform_data; + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int result; + u32 rh_a; + + dev_dbg(dev, "starting USB controller\n"); + + ohci_da8xx_clock(1); + + /* + * DA8xx only have 1 port connected to the pins but the HC root hub + * register A reports 2 ports, thus we'll have to override it... + */ + ohci->num_ports = 1; + + result = ohci_init(ohci); + if (result < 0) + return result; + + /* + * Since we're providing a board-specific root hub port power control + * and over-current reporting, we have to override the HC root hub A + * register's default value, so that ohci_hub_control() could return + * the correct hub descriptor... + */ + rh_a = ohci_readl(ohci, &ohci->regs->roothub.a); + if (hub->set_power) { + rh_a &= ~RH_A_NPS; + rh_a |= RH_A_PSM; + } + if (hub->get_oci) { + rh_a &= ~RH_A_NOCP; + rh_a |= RH_A_OCPM; + } + rh_a &= ~RH_A_POTPGT; + rh_a |= hub->potpgt << 24; + ohci_writel(ohci, rh_a, &ohci->regs->roothub.a); + + return result; +} + +static void ohci_da8xx_stop(struct usb_hcd *hcd) +{ + ohci_stop(hcd); + ohci_da8xx_clock(0); +} + +static int ohci_da8xx_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int result; + + result = ohci_run(ohci); + if (result < 0) + ohci_da8xx_stop(hcd); + + return result; +} + +/* + * Update the status data from the hub with the over-current indicator change. + */ +static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + int length = ohci_hub_status_data(hcd, buf); + + /* See if we have OCIC bit set on port 1 */ + if (ocic_mask & (1 << 1)) { + dev_dbg(hcd->self.controller, "over-current indicator change " + "on port 1\n"); + + if (!length) + length = 1; + + buf[0] |= 1 << 1; + } + return length; +} + +/* + * Look at the control requests to the root hub and see if we need to override. + */ +static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev->platform_data; + int temp; + + switch (typeReq) { + case GetPortStatus: + /* Check the port number */ + if (wIndex != 1) + break; + + dev_dbg(dev, "GetPortStatus(%u)\n", wIndex); + + temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1); + + /* The port power status (PPS) bit defaults to 1 */ + if (hub->get_power && hub->get_power(wIndex) == 0) + temp &= ~RH_PS_PPS; + + /* The port over-current indicator (POCI) bit is always 0 */ + if (hub->get_oci && hub->get_oci(wIndex) > 0) + temp |= RH_PS_POCI; + + /* The over-current indicator change (OCIC) bit is 0 too */ + if (ocic_mask & (1 << wIndex)) + temp |= RH_PS_OCIC; + + put_unaligned(cpu_to_le32(temp), (__le32 *)buf); + return 0; + case SetPortFeature: + temp = 1; + goto check_port; + case ClearPortFeature: + temp = 0; + +check_port: + /* Check the port number */ + if (wIndex != 1) + break; + + switch (wValue) { + case USB_PORT_FEAT_POWER: + dev_dbg(dev, "%sPortFeature(%u): %s\n", + temp ? "Set" : "Clear", wIndex, "POWER"); + + if (!hub->set_power) + return -EPIPE; + + return hub->set_power(wIndex, temp) ? -EPIPE : 0; + case USB_PORT_FEAT_C_OVER_CURRENT: + dev_dbg(dev, "%sPortFeature(%u): %s\n", + temp ? "Set" : "Clear", wIndex, + "C_OVER_CURRENT"); + + if (temp) + ocic_mask |= 1 << wIndex; + else + ocic_mask &= ~(1 << wIndex); + return 0; + } + } + + return ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); +} + +static const struct hc_driver ohci_da8xx_hc_driver = { + .description = hcd_name, + .product_desc = "DA8xx OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .reset = ohci_da8xx_init, + .start = ohci_da8xx_start, + .stop = ohci_da8xx_stop, + .shutdown = ohci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_da8xx_hub_status_data, + .hub_control = ohci_da8xx_hub_control, + +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +/*-------------------------------------------------------------------------*/ + + +/** + * usb_hcd_da8xx_probe - initialize DA8xx-based HCDs + * Context: !in_interrupt() + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + */ +static int usb_hcd_da8xx_probe(const struct hc_driver *driver, + struct platform_device *pdev) +{ + struct da8xx_ohci_root_hub *hub = pdev->dev.platform_data; + struct usb_hcd *hcd; + struct resource *mem; + int error, irq; + + if (hub == NULL) + return -ENODEV; + + usb11_clk = clk_get(&pdev->dev, "usb11"); + if (IS_ERR(usb11_clk)) + return PTR_ERR(usb11_clk); + + usb20_clk = clk_get(&pdev->dev, "usb20"); + if (IS_ERR(usb20_clk)) { + error = PTR_ERR(usb20_clk); + goto err0; + } + + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + error = -ENOMEM; + goto err1; + } + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem) { + error = -ENODEV; + goto err2; + } + hcd->rsrc_start = mem->start; + hcd->rsrc_len = mem->end - mem->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + dev_dbg(&pdev->dev, "request_mem_region failed\n"); + error = -EBUSY; + goto err2; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + dev_err(&pdev->dev, "ioremap failed\n"); + error = -ENOMEM; + goto err3; + } + + ohci_hcd_init(hcd_to_ohci(hcd)); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + error = -ENODEV; + goto err4; + } + error = usb_add_hcd(hcd, irq, IRQF_DISABLED); + if (error) + goto err4; + + if (hub->ocic_notify) { + error = hub->ocic_notify(ohci_da8xx_ocic_handler); + if (!error) + return 0; + } + + usb_remove_hcd(hcd); +err4: + iounmap(hcd->regs); +err3: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err2: + usb_put_hcd(hcd); +err1: + clk_put(usb20_clk); +err0: + clk_put(usb11_clk); + return error; +} + +/** + * usb_hcd_da8xx_remove - shutdown processing for DA8xx-based HCDs + * @dev: USB Host Controller being removed + * Context: !in_interrupt() + * + * Reverses the effect of usb_hcd_da8xx_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, normally "rmmod", "apmd", or something similar. + */ +static inline void +usb_hcd_da8xx_remove(struct usb_hcd *hcd, struct platform_device *pdev) +{ + struct da8xx_ohci_root_hub *hub = pdev->dev.platform_data; + + hub->ocic_notify(NULL); + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + clk_put(usb20_clk); + clk_put(usb11_clk); +} + +static int ohci_hcd_da8xx_drv_probe(struct platform_device *dev) +{ + return usb_hcd_da8xx_probe(&ohci_da8xx_hc_driver, dev); +} + +static int ohci_hcd_da8xx_drv_remove(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + + usb_hcd_da8xx_remove(hcd, dev); + platform_set_drvdata(dev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int ohci_da8xx_suspend(struct platform_device *dev, pm_message_t message) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + ohci_da8xx_clock(0); + hcd->state = HC_STATE_SUSPENDED; + dev->dev.power.power_state = PMSG_SUSPEND; + return 0; +} + +static int ohci_da8xx_resume(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + ohci_da8xx_clock(1); + dev->dev.power.power_state = PMSG_ON; + usb_hcd_resume_root_hub(hcd); + return 0; +} +#endif + +/* + * Driver definition to register with platform structure. + */ +static struct platform_driver ohci_hcd_da8xx_driver = { + .probe = ohci_hcd_da8xx_drv_probe, + .remove = ohci_hcd_da8xx_drv_remove, + .shutdown = usb_hcd_platform_shutdown, +#ifdef CONFIG_PM + .suspend = ohci_da8xx_suspend, + .resume = ohci_da8xx_resume, +#endif + .driver = { + .owner = THIS_MODULE, + .name = "ohci", + }, +}; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 24eb7478191..afe59be2364 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1051,6 +1051,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER usb_hcd_pnx4008_driver #endif +#ifdef CONFIG_ARCH_DAVINCI_DA8XX +#include "ohci-da8xx.c" +#define PLATFORM_DRIVER ohci_hcd_da8xx_driver +#endif + #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ defined(CONFIG_CPU_SUBTYPE_SH7763) || \ |