diff options
Diffstat (limited to 'drivers/video/Kconfig')
| -rw-r--r-- | drivers/video/Kconfig | 63 |
1 files changed, 39 insertions, 24 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 1b332d182a6..e9f193e6b27 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -5,8 +5,13 @@ menu "Graphics support" depends on HAS_IOMEM +config HAVE_FB_ATMEL + bool + source "drivers/char/agp/Kconfig" +source "drivers/gpu/vga/Kconfig" + source "drivers/gpu/drm/Kconfig" config VGASTATE @@ -935,7 +940,7 @@ config FB_S1D13XXX config FB_ATMEL tristate "AT91/AT32 LCD Controller support" - depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32) + depends on FB && HAVE_FB_ATMEL select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT @@ -951,7 +956,7 @@ config FB_INTSRAM config FB_ATMEL_STN bool "Use a STN display with AT91/AT32 LCD Controller" - depends on FB_ATMEL && MACH_AT91SAM9261EK + depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK) default n help Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD @@ -1273,26 +1278,6 @@ config FB_MATROX_MAVEN painting procedures (the secondary head does not use acceleration engine). -config FB_MATROX_MULTIHEAD - bool "Multihead support" - depends on FB_MATROX - ---help--- - Say Y here if you have more than one (supported) Matrox device in - your computer and you want to use all of them for different monitors - ("multihead"). If you have only one device, you should say N because - the driver compiled with Y is larger and a bit slower, especially on - ia32 (ix86). - - If you said M to "Matrox unified accelerated driver" and N here, you - will still be able to use several Matrox devices simultaneously: - insert several instances of the module matroxfb into the kernel - with insmod, supplying the parameter "dev=N" where N is 0, 1, etc. - for the different Matrox devices. This method is slightly faster but - uses 40 KB of kernel memory per Matrox card. - - There is no need for enabling 'Matrox multihead support' if you have - only one Matrox card in the box. - config FB_RADEON tristate "ATI Radeon display support" depends on FB && PCI @@ -1867,7 +1852,7 @@ config FB_W100 config FB_SH_MOBILE_LCDC tristate "SuperH Mobile LCDC framebuffer support" - depends on FB && SUPERH + depends on FB && SUPERH && HAVE_CLK select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT @@ -2039,6 +2024,17 @@ config FB_SH7760 and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for panels <= 320 pixel horizontal resolution. +config FB_DA8XX + tristate "DA8xx/OMAP-L1xx Framebuffer support" + depends on FB && ARCH_DAVINCI_DA8XX + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + This is the frame buffer device driver for the TI LCD controller + found on DA8xx/OMAP-L1xx SoCs. + If unsure, say N. + config FB_VIRTUAL tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" depends on FB @@ -2116,13 +2112,32 @@ config FB_MB862XX_LIME ---help--- Framebuffer support for Fujitsu Lime GDC on host CPU bus. +config FB_EP93XX + tristate "EP93XX frame buffer support" + depends on FB && ARCH_EP93XX + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Framebuffer driver for the Cirrus Logic EP93XX series of processors. + This driver is also available as a module. The module will be called + ep93xx-fb. + config FB_PRE_INIT_FB bool "Don't reinitialize, use bootloader's GDC/Display configuration" - depends on FB_MB862XX_LIME + depends on FB && FB_MB862XX_LIME ---help--- Select this option if display contents should be inherited as set by the bootloader. +config FB_MSM + tristate + depends on FB && ARCH_MSM + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + default y + config FB_MX3 tristate "MX3 Framebuffer support" depends on FB && MX3_IPU |