aboutsummaryrefslogtreecommitdiff
path: root/drivers/w1
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/w1')
-rw-r--r--drivers/w1/Kconfig60
-rw-r--r--drivers/w1/Makefile10
-rw-r--r--drivers/w1/masters/Kconfig38
-rw-r--r--drivers/w1/masters/Makefile11
-rw-r--r--drivers/w1/masters/ds_w1_bridge.c (renamed from drivers/w1/ds_w1_bridge.c)4
-rw-r--r--drivers/w1/masters/dscore.c (renamed from drivers/w1/dscore.c)4
-rw-r--r--drivers/w1/masters/dscore.h (renamed from drivers/w1/dscore.h)0
-rw-r--r--drivers/w1/masters/matrox_w1.c (renamed from drivers/w1/matrox_w1.c)8
-rw-r--r--drivers/w1/slaves/Kconfig38
-rw-r--r--drivers/w1/slaves/Makefile12
-rw-r--r--drivers/w1/slaves/w1_ds2433.c (renamed from drivers/w1/w1_ds2433.c)8
-rw-r--r--drivers/w1/slaves/w1_smem.c (renamed from drivers/w1/w1_smem.c)10
-rw-r--r--drivers/w1/slaves/w1_therm.c (renamed from drivers/w1/w1_therm.c)14
13 files changed, 126 insertions, 91 deletions
diff --git a/drivers/w1/Kconfig b/drivers/w1/Kconfig
index 4baf61a2232..5e61ed59a41 100644
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
@@ -11,63 +11,7 @@ config W1
This W1 support can also be built as a module. If so, the module
will be called wire.ko.
-config W1_MATROX
- tristate "Matrox G400 transport layer for 1-wire"
- depends on W1 && PCI
- help
- Say Y here if you want to communicate with your 1-wire devices
- using Matrox's G400 GPIO pins.
-
- This support is also available as a module. If so, the module
- will be called matrox_w1.ko.
-
-config W1_DS9490
- tristate "DS9490R transport layer driver"
- depends on W1 && USB
- help
- Say Y here if you want to have a driver for DS9490R UWB <-> W1 bridge.
-
- This support is also available as a module. If so, the module
- will be called ds9490r.ko.
-
-config W1_DS9490_BRIDGE
- tristate "DS9490R USB <-> W1 transport layer for 1-wire"
- depends on W1_DS9490
- help
- Say Y here if you want to communicate with your 1-wire devices
- using DS9490R USB bridge.
-
- This support is also available as a module. If so, the module
- will be called ds_w1_bridge.ko.
-
-config W1_THERM
- tristate "Thermal family implementation"
- depends on W1
- help
- Say Y here if you want to connect 1-wire thermal sensors to you
- wire.
-
-config W1_SMEM
- tristate "Simple 64bit memory family implementation"
- depends on W1
- help
- Say Y here if you want to connect 1-wire
- simple 64bit memory rom(ds2401/ds2411/ds1990*) to you wire.
-
-config W1_DS2433
- tristate "4kb EEPROM family support (DS2433)"
- depends on W1
- help
- Say Y here if you want to use a 1-wire
- 4kb EEPROM family device (DS2433).
-
-config W1_DS2433_CRC
- bool "Protect DS2433 data with a CRC16"
- depends on W1_DS2433
- select CRC16
- help
- Say Y here to protect DS2433 data with a CRC16.
- Each block has 30 bytes of data and a two byte CRC16.
- Full block writes are only allowed if the CRC is valid.
+source drivers/w1/masters/Kconfig
+source drivers/w1/slaves/Kconfig
endmenu
diff --git a/drivers/w1/Makefile b/drivers/w1/Makefile
index 01fb5439147..0c2aa22d8c0 100644
--- a/drivers/w1/Makefile
+++ b/drivers/w1/Makefile
@@ -13,13 +13,5 @@ endif
obj-$(CONFIG_W1) += wire.o
wire-objs := w1.o w1_int.o w1_family.o w1_netlink.o w1_io.o
-obj-$(CONFIG_W1_MATROX) += matrox_w1.o
-obj-$(CONFIG_W1_THERM) += w1_therm.o
-obj-$(CONFIG_W1_SMEM) += w1_smem.o
+obj-y += masters/ slaves/
-obj-$(CONFIG_W1_DS9490) += ds9490r.o
-ds9490r-objs := dscore.o
-
-obj-$(CONFIG_W1_DS9490_BRIDGE) += ds_w1_bridge.o
-
-obj-$(CONFIG_W1_DS2433) += w1_ds2433.o
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
new file mode 100644
index 00000000000..51bd64d0e54
--- /dev/null
+++ b/drivers/w1/masters/Kconfig
@@ -0,0 +1,38 @@
+#
+# 1-wire bus master configuration
+#
+
+menu "1-wire Bus Masters"
+ depends on W1
+
+config W1_MASTER_MATROX
+ tristate "Matrox G400 transport layer for 1-wire"
+ depends on W1 && PCI
+ help
+ Say Y here if you want to communicate with your 1-wire devices
+ using Matrox's G400 GPIO pins.
+
+ This support is also available as a module. If so, the module
+ will be called matrox_w1.ko.
+
+config W1_MASTER_DS9490
+ tristate "DS9490R transport layer driver"
+ depends on W1 && USB
+ help
+ Say Y here if you want to have a driver for DS9490R UWB <-> W1 bridge.
+
+ This support is also available as a module. If so, the module
+ will be called ds9490r.ko.
+
+config W1_MASTER_DS9490_BRIDGE
+ tristate "DS9490R USB <-> W1 transport layer for 1-wire"
+ depends on W1_DS9490
+ help
+ Say Y here if you want to communicate with your 1-wire devices
+ using DS9490R USB bridge.
+
+ This support is also available as a module. If so, the module
+ will be called ds_w1_bridge.ko.
+
+endmenu
+
diff --git a/drivers/w1/masters/Makefile b/drivers/w1/masters/Makefile
new file mode 100644
index 00000000000..d9b84e522d6
--- /dev/null
+++ b/drivers/w1/masters/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for 1-wire bus master drivers.
+#
+
+obj-$(CONFIG_W1_MASTER_MATROX) += matrox_w1.o
+
+obj-$(CONFIG_W1_MASTER_DS9490) += ds9490r.o
+ds9490r-objs := dscore.o
+
+obj-$(CONFIG_W1_MASTER_DS9490_BRIDGE) += ds_w1_bridge.o
+
diff --git a/drivers/w1/ds_w1_bridge.c b/drivers/w1/masters/ds_w1_bridge.c
index 29e01d57c6b..5d30783a3eb 100644
--- a/drivers/w1/ds_w1_bridge.c
+++ b/drivers/w1/masters/ds_w1_bridge.c
@@ -22,8 +22,8 @@
#include <linux/module.h>
#include <linux/types.h>
-#include "../w1/w1.h"
-#include "../w1/w1_int.h"
+#include "../w1.h"
+#include "../w1_int.h"
#include "dscore.h"
static struct ds_device *ds_dev;
diff --git a/drivers/w1/dscore.c b/drivers/w1/masters/dscore.c
index b9146306df4..2cf7776a708 100644
--- a/drivers/w1/dscore.c
+++ b/drivers/w1/masters/dscore.c
@@ -340,7 +340,7 @@ int ds_reset(struct ds_device *dev, struct ds_status *st)
return -EIO;
}
#endif
-
+
return 0;
}
@@ -348,7 +348,7 @@ int ds_reset(struct ds_device *dev, struct ds_status *st)
int ds_set_speed(struct ds_device *dev, int speed)
{
int err;
-
+
if (speed != SPEED_NORMAL && speed != SPEED_FLEXIBLE && speed != SPEED_OVERDRIVE)
return -EINVAL;
diff --git a/drivers/w1/dscore.h b/drivers/w1/masters/dscore.h
index 6cf5671d6eb..6cf5671d6eb 100644
--- a/drivers/w1/dscore.h
+++ b/drivers/w1/masters/dscore.h
diff --git a/drivers/w1/matrox_w1.c b/drivers/w1/masters/matrox_w1.c
index 750a1aacf6f..591809cbbb9 100644
--- a/drivers/w1/matrox_w1.c
+++ b/drivers/w1/masters/matrox_w1.c
@@ -19,8 +19,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <asm/atomic.h>
#include <asm/types.h>
+#include <asm/atomic.h>
#include <asm/io.h>
#include <linux/delay.h>
@@ -35,9 +35,9 @@
#include <linux/pci.h>
#include <linux/timer.h>
-#include "w1.h"
-#include "w1_int.h"
-#include "w1_log.h"
+#include "../w1.h"
+#include "../w1_int.h"
+#include "../w1_log.h"
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
new file mode 100644
index 00000000000..f9d4c91fc53
--- /dev/null
+++ b/drivers/w1/slaves/Kconfig
@@ -0,0 +1,38 @@
+#
+# 1-wire slaves configuration
+#
+
+menu "1-wire Slaves"
+ depends on W1
+
+config W1_SLAVE_THERM
+ tristate "Thermal family implementation"
+ depends on W1
+ help
+ Say Y here if you want to connect 1-wire thermal sensors to you
+ wire.
+
+config W1_SLAVE_SMEM
+ tristate "Simple 64bit memory family implementation"
+ depends on W1
+ help
+ Say Y here if you want to connect 1-wire
+ simple 64bit memory rom(ds2401/ds2411/ds1990*) to you wire.
+
+config W1_SLAVE_DS2433
+ tristate "4kb EEPROM family support (DS2433)"
+ depends on W1
+ help
+ Say Y here if you want to use a 1-wire
+ 4kb EEPROM family device (DS2433).
+
+config W1_SLAVE_DS2433_CRC
+ bool "Protect DS2433 data with a CRC16"
+ depends on W1_DS2433
+ select CRC16
+ help
+ Say Y here to protect DS2433 data with a CRC16.
+ Each block has 30 bytes of data and a two byte CRC16.
+ Full block writes are only allowed if the CRC is valid.
+
+endmenu
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
new file mode 100644
index 00000000000..70e21e2d70c
--- /dev/null
+++ b/drivers/w1/slaves/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the Dallas's 1-wire slaves.
+#
+
+ifeq ($(CONFIG_W1_SLAVE_DS2433_CRC), y)
+EXTRA_CFLAGS += -DCONFIG_W1_F23_CRC
+endif
+
+obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o
+obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o
+obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
+
diff --git a/drivers/w1/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c
index 1e3d98aac12..fb118be789e 100644
--- a/drivers/w1/w1_ds2433.c
+++ b/drivers/w1/slaves/w1_ds2433.c
@@ -21,10 +21,10 @@
#endif
-#include "w1.h"
-#include "w1_io.h"
-#include "w1_int.h"
-#include "w1_family.h"
+#include "../w1.h"
+#include "../w1_io.h"
+#include "../w1_int.h"
+#include "../w1_family.h"
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
diff --git a/drivers/w1/w1_smem.c b/drivers/w1/slaves/w1_smem.c
index e3209d0aca9..c6d3be54f94 100644
--- a/drivers/w1/w1_smem.c
+++ b/drivers/w1/slaves/w1_smem.c
@@ -27,10 +27,10 @@
#include <linux/device.h>
#include <linux/types.h>
-#include "w1.h"
-#include "w1_io.h"
-#include "w1_int.h"
-#include "w1_family.h"
+#include "../w1.h"
+#include "../w1_io.h"
+#include "../w1_int.h"
+#include "../w1_family.h"
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
@@ -51,7 +51,7 @@ static int __init w1_smem_init(void)
err = w1_register_family(&w1_smem_family_01);
if (err)
return err;
-
+
err = w1_register_family(&w1_smem_family_81);
if (err) {
w1_unregister_family(&w1_smem_family_01);
diff --git a/drivers/w1/w1_therm.c b/drivers/w1/slaves/w1_therm.c
index 4577df3cfc4..536d16d78de 100644
--- a/drivers/w1/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@@ -28,10 +28,10 @@
#include <linux/types.h>
#include <linux/delay.h>
-#include "w1.h"
-#include "w1_io.h"
-#include "w1_int.h"
-#include "w1_family.h"
+#include "../w1.h"
+#include "../w1_io.h"
+#include "../w1_int.h"
+#include "../w1_family.h"
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
@@ -123,12 +123,12 @@ static inline int w1_DS18S20_convert_temp(u8 rom[9])
if (!rom[7])
return 0;
-
+
if (rom[1] == 0)
t = ((s32)rom[0] >> 1)*1000;
else
t = 1000*(-1*(s32)(0x100-rom[0]) >> 1);
-
+
t -= 250;
h = 1000*((s32)rom[7] - (s32)rom[6]);
h /= (s32)rom[7];
@@ -231,7 +231,7 @@ static ssize_t w1_therm_read_bin(struct kobject *kobj, char *buf, loff_t off, si
for (i = 0; i < 9; ++i)
count += sprintf(buf + count, "%02x ", sl->rom[i]);
-
+
count += sprintf(buf + count, "t=%d\n", w1_convert_temp(rom, sl->family->fid));
out:
up(&dev->mutex);