aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/scsi/ncr53c8xx.c734
-rw-r--r--drivers/scsi/ncr53c8xx.h1263
-rw-r--r--drivers/scsi/sym53c8xx_comm.h792
-rw-r--r--drivers/scsi/sym53c8xx_defs.h1320
4 files changed, 1995 insertions, 2114 deletions
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 8e1c77c81f6..32350707b94 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -131,7 +131,739 @@
#define NAME53C "ncr53c"
#define NAME53C8XX "ncr53c8xx"
-#include "sym53c8xx_comm.h"
+
+/*==========================================================
+**
+** Debugging tags
+**
+**==========================================================
+*/
+
+#define DEBUG_ALLOC (0x0001)
+#define DEBUG_PHASE (0x0002)
+#define DEBUG_QUEUE (0x0008)
+#define DEBUG_RESULT (0x0010)
+#define DEBUG_POINTER (0x0020)
+#define DEBUG_SCRIPT (0x0040)
+#define DEBUG_TINY (0x0080)
+#define DEBUG_TIMING (0x0100)
+#define DEBUG_NEGO (0x0200)
+#define DEBUG_TAGS (0x0400)
+#define DEBUG_SCATTER (0x0800)
+#define DEBUG_IC (0x1000)
+
+/*
+** Enable/Disable debug messages.
+** Can be changed at runtime too.
+*/
+
+#ifdef SCSI_NCR_DEBUG_INFO_SUPPORT
+static int ncr_debug = SCSI_NCR_DEBUG_FLAGS;
+ #define DEBUG_FLAGS ncr_debug
+#else
+ #define DEBUG_FLAGS SCSI_NCR_DEBUG_FLAGS
+#endif
+
+static inline struct list_head *ncr_list_pop(struct list_head *head)
+{
+ if (!list_empty(head)) {
+ struct list_head *elem = head->next;
+
+ list_del(elem);
+ return elem;
+ }
+
+ return NULL;
+}
+
+/*==========================================================
+**
+** Simple power of two buddy-like allocator.
+**
+** This simple code is not intended to be fast, but to
+** provide power of 2 aligned memory allocations.
+** Since the SCRIPTS processor only supplies 8 bit
+** arithmetic, this allocator allows simple and fast
+** address calculations from the SCRIPTS code.
+** In addition, cache line alignment is guaranteed for
+** power of 2 cache line size.
+** Enhanced in linux-2.3.44 to provide a memory pool
+** per pcidev to support dynamic dma mapping. (I would
+** have preferred a real bus astraction, btw).
+**
+**==========================================================
+*/
+
+#define MEMO_SHIFT 4 /* 16 bytes minimum memory chunk */
+#if PAGE_SIZE >= 8192
+#define MEMO_PAGE_ORDER 0 /* 1 PAGE maximum */
+#else
+#define MEMO_PAGE_ORDER 1 /* 2 PAGES maximum */
+#endif
+#define MEMO_FREE_UNUSED /* Free unused pages immediately */
+#define MEMO_WARN 1
+#define MEMO_GFP_FLAGS GFP_ATOMIC
+#define MEMO_CLUSTER_SHIFT (PAGE_SHIFT+MEMO_PAGE_ORDER)
+#define MEMO_CLUSTER_SIZE (1UL << MEMO_CLUSTER_SHIFT)
+#define MEMO_CLUSTER_MASK (MEMO_CLUSTER_SIZE-1)
+
+typedef u_long m_addr_t; /* Enough bits to bit-hack addresses */
+typedef struct device *m_bush_t; /* Something that addresses DMAable */
+
+typedef struct m_link { /* Link between free memory chunks */
+ struct m_link *next;
+} m_link_s;
+
+typedef struct m_vtob { /* Virtual to Bus address translation */
+ struct m_vtob *next;
+ m_addr_t vaddr;
+ m_addr_t baddr;
+} m_vtob_s;
+#define VTOB_HASH_SHIFT 5
+#define VTOB_HASH_SIZE (1UL << VTOB_HASH_SHIFT)
+#define VTOB_HASH_MASK (VTOB_HASH_SIZE-1)
+#define VTOB_HASH_CODE(m) \
+ ((((m_addr_t) (m)) >> MEMO_CLUSTER_SHIFT) & VTOB_HASH_MASK)
+
+typedef struct m_pool { /* Memory pool of a given kind */
+ m_bush_t bush;
+ m_addr_t (*getp)(struct m_pool *);
+ void (*freep)(struct m_pool *, m_addr_t);
+ int nump;
+ m_vtob_s *(vtob[VTOB_HASH_SIZE]);
+ struct m_pool *next;
+ struct m_link h[PAGE_SHIFT-MEMO_SHIFT+MEMO_PAGE_ORDER+1];
+} m_pool_s;
+
+static void *___m_alloc(m_pool_s *mp, int size)
+{
+ int i = 0;
+ int s = (1 << MEMO_SHIFT);
+ int j;
+ m_addr_t a;
+ m_link_s *h = mp->h;
+
+ if (size > (PAGE_SIZE << MEMO_PAGE_ORDER))
+ return NULL;
+
+ while (size > s) {
+ s <<= 1;
+ ++i;
+ }
+
+ j = i;
+ while (!h[j].next) {
+ if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) {
+ h[j].next = (m_link_s *)mp->getp(mp);
+ if (h[j].next)
+ h[j].next->next = NULL;
+ break;
+ }
+ ++j;
+ s <<= 1;
+ }
+ a = (m_addr_t) h[j].next;
+ if (a) {
+ h[j].next = h[j].next->next;
+ while (j > i) {
+ j -= 1;
+ s >>= 1;
+ h[j].next = (m_link_s *) (a+s);
+ h[j].next->next = NULL;
+ }
+ }
+#ifdef DEBUG
+ printk("___m_alloc(%d) = %p\n", size, (void *) a);
+#endif
+ return (void *) a;
+}
+
+static void ___m_free(m_pool_s *mp, void *ptr, int size)
+{
+ int i = 0;
+ int s = (1 << MEMO_SHIFT);
+ m_link_s *q;
+ m_addr_t a, b;
+ m_link_s *h = mp->h;
+
+#ifdef DEBUG
+ printk("___m_free(%p, %d)\n", ptr, size);
+#endif
+
+ if (size > (PAGE_SIZE << MEMO_PAGE_ORDER))
+ return;
+
+ while (size > s) {
+ s <<= 1;
+ ++i;
+ }
+
+ a = (m_addr_t) ptr;
+
+ while (1) {
+#ifdef MEMO_FREE_UNUSED
+ if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) {
+ mp->freep(mp, a);
+ break;
+ }
+#endif
+ b = a ^ s;
+ q = &h[i];
+ while (q->next && q->next != (m_link_s *) b) {
+ q = q->next;
+ }
+ if (!q->next) {
+ ((m_link_s *) a)->next = h[i].next;
+ h[i].next = (m_link_s *) a;
+ break;
+ }
+ q->next = q->next->next;
+ a = a & b;
+ s <<= 1;
+ ++i;
+ }
+}
+
+static DEFINE_SPINLOCK(ncr53c8xx_lock);
+
+static void *__m_calloc2(m_pool_s *mp, int size, char *name, int uflags)
+{
+ void *p;
+
+ p = ___m_alloc(mp, size);
+
+ if (DEBUG_FLAGS & DEBUG_ALLOC)
+ printk ("new %-10s[%4d] @%p.\n", name, size, p);
+
+ if (p)
+ memset(p, 0, size);
+ else if (uflags & MEMO_WARN)
+ printk (NAME53C8XX ": failed to allocate %s[%d]\n", name, size);
+
+ return p;
+}
+
+#define __m_calloc(mp, s, n) __m_calloc2(mp, s, n, MEMO_WARN)
+
+static void __m_free(m_pool_s *mp, void *ptr, int size, char *name)
+{
+ if (DEBUG_FLAGS & DEBUG_ALLOC)
+ printk ("freeing %-10s[%4d] @%p.\n", name, size, ptr);
+
+ ___m_free(mp, ptr, size);
+
+}
+
+/*
+ * With pci bus iommu support, we use a default pool of unmapped memory
+ * for memory we donnot need to DMA from/to and one pool per pcidev for
+ * memory accessed by the PCI chip. `mp0' is the default not DMAable pool.
+ */
+
+static m_addr_t ___mp0_getp(m_pool_s *mp)
+{
+ m_addr_t m = __get_free_pages(MEMO_GFP_FLAGS, MEMO_PAGE_ORDER);
+ if (m)
+ ++mp->nump;
+ return m;
+}
+
+static void ___mp0_freep(m_pool_s *mp, m_addr_t m)
+{
+ free_pages(m, MEMO_PAGE_ORDER);
+ --mp->nump;
+}
+
+static m_pool_s mp0 = {NULL, ___mp0_getp, ___mp0_freep};
+
+/*
+ * DMAable pools.
+ */
+
+/*
+ * With pci bus iommu support, we maintain one pool per pcidev and a
+ * hashed reverse table for virtual to bus physical address translations.
+ */
+static m_addr_t ___dma_getp(m_pool_s *mp)
+{
+ m_addr_t vp;
+ m_vtob_s *vbp;
+
+ vbp = __m_calloc(&mp0, sizeof(*vbp), "VTOB");
+ if (vbp) {
+ dma_addr_t daddr;
+ vp = (m_addr_t) dma_alloc_coherent(mp->bush,
+ PAGE_SIZE<<MEMO_PAGE_ORDER,
+ &daddr, GFP_ATOMIC);
+ if (vp) {
+ int hc = VTOB_HASH_CODE(vp);
+ vbp->vaddr = vp;
+ vbp->baddr = daddr;
+ vbp->next = mp->vtob[hc];
+ mp->vtob[hc] = vbp;
+ ++mp->nump;
+ return vp;
+ }
+ }
+ if (vbp)
+ __m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
+ return 0;
+}
+
+static void ___dma_freep(m_pool_s *mp, m_addr_t m)
+{
+ m_vtob_s **vbpp, *vbp;
+ int hc = VTOB_HASH_CODE(m);
+
+ vbpp = &mp->vtob[hc];
+ while (*vbpp && (*vbpp)->vaddr != m)
+ vbpp = &(*vbpp)->next;
+ if (*vbpp) {
+ vbp = *vbpp;
+ *vbpp = (*vbpp)->next;
+ dma_free_coherent(mp->bush, PAGE_SIZE<<MEMO_PAGE_ORDER,
+ (void *)vbp->vaddr, (dma_addr_t)vbp->baddr);
+ __m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
+ --mp->nump;
+ }
+}
+
+static inline m_pool_s *___get_dma_pool(m_bush_t bush)
+{
+ m_pool_s *mp;
+ for (mp = mp0.next; mp && mp->bush != bush; mp = mp->next);
+ return mp;
+}
+
+static m_pool_s *___cre_dma_pool(m_bush_t bush)
+{
+ m_pool_s *mp;
+ mp = __m_calloc(&mp0, sizeof(*mp), "MPOOL");
+ if (mp) {
+ memset(mp, 0, sizeof(*mp));
+ mp->bush = bush;
+ mp->getp = ___dma_getp;
+ mp->freep = ___dma_freep;
+ mp->next = mp0.next;
+ mp0.next = mp;
+ }
+ return mp;
+}
+
+static void ___del_dma_pool(m_pool_s *p)
+{
+ struct m_pool **pp = &mp0.next;
+
+ while (*pp && *pp != p)
+ pp = &(*pp)->next;
+ if (*pp) {
+ *pp = (*pp)->next;
+ __m_free(&mp0, p, sizeof(*p), "MPOOL");
+ }
+}
+
+static void *__m_calloc_dma(m_bush_t bush, int size, char *name)
+{
+ u_long flags;
+ struct m_pool *mp;
+ void *m = NULL;
+
+ spin_lock_irqsave(&ncr53c8xx_lock, flags);
+ mp = ___get_dma_pool(bush);
+ if (!mp)
+ mp = ___cre_dma_pool(bush);
+ if (mp)
+ m = __m_calloc(mp, size, name);
+ if (mp && !mp->nump)
+ ___del_dma_pool(mp);
+ spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
+
+ return m;
+}
+
+static void __m_free_dma(m_bush_t bush, void *m, int size, char *name)
+{
+ u_long flags;
+ struct m_pool *mp;
+
+ spin_lock_irqsave(&ncr53c8xx_lock, flags);
+ mp = ___get_dma_pool(bush);
+ if (mp)
+ __m_free(mp, m, size, name);
+ if (mp && !mp->nump)
+ ___del_dma_pool(mp);
+ spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
+}
+
+static m_addr_t __vtobus(m_bush_t bush, void *m)
+{
+ u_long flags;
+ m_pool_s *mp;
+ int hc = VTOB_HASH_CODE(m);
+ m_vtob_s *vp = NULL;
+ m_addr_t a = ((m_addr_t) m) & ~MEMO_CLUSTER_MASK;
+
+ spin_lock_irqsave(&ncr53c8xx_lock, flags);
+ mp = ___get_dma_pool(bush);
+ if (mp) {
+ vp = mp->vtob[hc];
+ while (vp && (m_addr_t) vp->vaddr != a)
+ vp = vp->next;
+ }
+ spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
+ return vp ? vp->baddr + (((m_addr_t) m) - a) : 0;
+}
+
+#define _m_calloc_dma(np, s, n) __m_calloc_dma(np->dev, s, n)
+#define _m_free_dma(np, p, s, n) __m_free_dma(np->dev, p, s, n)
+#define m_calloc_dma(s, n) _m_calloc_dma(np, s, n)
+#define m_free_dma(p, s, n) _m_free_dma(np, p, s, n)
+#define _vtobus(np, p) __vtobus(np->dev, p)
+#define vtobus(p) _vtobus(np, p)
+
+/*
+ * Deal with DMA mapping/unmapping.
+ */
+
+/* To keep track of the dma mapping (sg/single) that has been set */
+#define __data_mapped SCp.phase
+#define __data_mapping SCp.have_data_in
+
+static void __unmap_scsi_data(struct device *dev, struct scsi_cmnd *cmd)
+{
+ switch(cmd->__data_mapped) {
+ case 2:
+ dma_unmap_sg(dev, cmd->buffer, cmd->use_sg,
+ cmd->sc_data_direction);
+ break;
+ case 1:
+ dma_unmap_single(dev, cmd->__data_mapping,
+ cmd->request_bufflen,
+ cmd->sc_data_direction);
+ break;
+ }
+ cmd->__data_mapped = 0;
+}
+
+static u_long __map_scsi_single_data(struct device *dev, struct scsi_cmnd *cmd)
+{
+ dma_addr_t mapping;
+
+ if (cmd->request_bufflen == 0)
+ return 0;
+
+ mapping = dma_map_single(dev, cmd->request_buffer,
+ cmd->request_bufflen,
+ cmd->sc_data_direction);
+ cmd->__data_mapped = 1;
+ cmd->__data_mapping = mapping;
+
+ return mapping;
+}
+
+static int __map_scsi_sg_data(struct device *dev, struct scsi_cmnd *cmd)
+{
+ int use_sg;
+
+ if (cmd->use_sg == 0)
+ return 0;
+
+ use_sg = dma_map_sg(dev, cmd->buffer, cmd->use_sg,
+ cmd->sc_data_direction);
+ cmd->__data_mapped = 2;
+ cmd->__data_mapping = use_sg;
+
+ return use_sg;
+}
+
+#define unmap_scsi_data(np, cmd) __unmap_scsi_data(np->dev, cmd)
+#define map_scsi_single_data(np, cmd) __map_scsi_single_data(np->dev, cmd)
+#define map_scsi_sg_data(np, cmd) __map_scsi_sg_data(np->dev, cmd)
+
+/*==========================================================
+**
+** Driver setup.
+**
+** This structure is initialized from linux config
+** options. It can be overridden at boot-up by the boot
+** command line.
+**
+**==========================================================
+*/
+static struct ncr_driver_setup
+ driver_setup = SCSI_NCR_DRIVER_SETUP;
+
+#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
+static struct ncr_driver_setup
+ driver_safe_setup __initdata = SCSI_NCR_DRIVER_SAFE_SETUP;
+#endif
+
+#define initverbose (driver_setup.verbose)
+#define bootverbose (np->verbose)
+
+
+/*===================================================================
+**
+** Driver setup from the boot command line
+**
+**===================================================================
+*/
+
+#ifdef MODULE
+#define ARG_SEP ' '
+#else
+#define ARG_SEP ','
+#endif
+
+#define OPT_TAGS 1
+#define OPT_MASTER_PARITY 2
+#define OPT_SCSI_PARITY 3
+#define OPT_DISCONNECTION 4
+#define OPT_SPECIAL_FEATURES 5
+#define OPT_UNUSED_1 6
+#define OPT_FORCE_SYNC_NEGO 7
+#define OPT_REVERSE_PROBE 8
+#define OPT_DEFAULT_SYNC 9
+#define OPT_VERBOSE 10
+#define OPT_DEBUG 11
+#define OPT_BURST_MAX 12
+#define OPT_LED_PIN 13
+#define OPT_MAX_WIDE 14
+#define OPT_SETTLE_DELAY 15
+#define OPT_DIFF_SUPPORT 16
+#define OPT_IRQM 17
+#define OPT_PCI_FIX_UP 18
+#define OPT_BUS_CHECK 19
+#define OPT_OPTIMIZE 20
+#define OPT_RECOVERY 21
+#define OPT_SAFE_SETUP 22
+#define OPT_USE_NVRAM 23
+#define OPT_EXCLUDE 24
+#define OPT_HOST_ID 25
+
+#ifdef SCSI_NCR_IARB_SUPPORT
+#define OPT_IARB 26
+#endif
+
+static char setup_token[] __initdata =
+ "tags:" "mpar:"
+ "spar:" "disc:"
+ "specf:" "ultra:"
+ "fsn:" "revprob:"
+ "sync:" "verb:"
+ "debug:" "burst:"
+ "led:" "wide:"
+ "settle:" "diff:"
+ "irqm:" "pcifix:"
+ "buschk:" "optim:"
+ "recovery:"
+ "safe:" "nvram:"
+ "excl:" "hostid:"
+#ifdef SCSI_NCR_IARB_SUPPORT
+ "iarb:"
+#endif
+ ; /* DONNOT REMOVE THIS ';' */
+
+#ifdef MODULE
+#define ARG_SEP ' '
+#else
+#define ARG_SEP ','
+#endif
+
+static int __init get_setup_token(char *p)
+{
+ char *cur = setup_token;
+ char *pc;
+ int i = 0;
+
+ while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
+ ++pc;
+ ++i;
+ if (!strncmp(p, cur, pc - cur))
+ return i;
+ cur = pc;
+ }
+ return 0;
+}
+
+
+static int __init sym53c8xx__setup(char *str)
+{
+#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
+ char *cur = str;
+ char *pc, *pv;
+ int i, val, c;
+ int xi = 0;
+
+ while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
+ char *pe;
+
+ val = 0;
+ pv = pc;
+ c = *++pv;
+
+ if (c == 'n')
+ val = 0;
+ else if (c == 'y')
+ val = 1;
+ else
+ val = (int) simple_strtoul(pv, &pe, 0);
+
+ switch (get_setup_token(cur)) {
+ case OPT_TAGS:
+ driver_setup.default_tags = val;
+ if (pe && *pe == '/') {
+ i = 0;
+ while (*pe && *pe != ARG_SEP &&
+ i < sizeof(driver_setup.tag_ctrl)-1) {
+ driver_setup.tag_ctrl[i++] = *pe++;
+ }
+ driver_setup.tag_ctrl[i] = '\0';
+ }
+ break;
+ case OPT_MASTER_PARITY:
+ driver_setup.master_parity = val;
+ break;
+ case OPT_SCSI_PARITY:
+ driver_setup.scsi_parity = val;
+ break;
+ case OPT_DISCONNECTION:
+ driver_setup.disconnection = val;
+ break;
+ case OPT_SPECIAL_FEATURES:
+ driver_setup.special_features = val;
+ break;
+ case OPT_FORCE_SYNC_NEGO:
+ driver_setup.force_sync_nego = val;
+ break;
+ case OPT_REVERSE_PROBE:
+ driver_setup.reverse_probe = val;
+ break;
+ case OPT_DEFAULT_SYNC:
+ driver_setup.default_sync = val;
+ break;
+ case OPT_VERBOSE:
+ driver_setup.verbose = val;
+ break;
+ case OPT_DEBUG:
+ driver_setup.debug = val;
+ break;
+ case OPT_BURST_MAX:
+ driver_setup.burst_max = val;
+ break;
+ case OPT_LED_PIN:
+ driver_setup.led_pin = val;
+ break;
+ case OPT_MAX_WIDE:
+ driver_setup.max_wide = val? 1:0;
+ break;
+ case OPT_SETTLE_DELAY:
+ driver_setup.settle_delay = val;
+ break;
+ case OPT_DIFF_SUPPORT:
+ driver_setup.diff_support = val;
+ break;
+ case OPT_IRQM:
+ driver_setup.irqm = val;
+ break;
+ case OPT_PCI_FIX_UP:
+ driver_setup.pci_fix_up = val;
+ break;
+ case OPT_BUS_CHECK:
+ driver_setup.bus_check = val;
+ break;
+ case OPT_OPTIMIZE:
+ driver_setup.optimize = val;
+ break;
+ case OPT_RECOVERY:
+ driver_setup.recovery = val;
+ break;
+ case OPT_USE_NVRAM:
+ driver_setup.use_nvram = val;
+ break;
+ case OPT_SAFE_SETUP:
+ memcpy(&driver_setup, &driver_safe_setup,
+ sizeof(driver_setup));
+ break;
+ case OPT_EXCLUDE:
+ if (xi < SCSI_NCR_MAX_EXCLUDES)
+ driver_setup.excludes[xi++] = val;
+ break;
+ case OPT_HOST_ID:
+ driver_setup.host_id = val;
+ break;
+#ifdef SCSI_NCR_IARB_SUPPORT
+ case OPT_IARB:
+ driver_setup.iarb = val;
+ break;
+#endif
+ default:
+ printk("sym53c8xx_setup: unexpected boot option '%.*s' ignored\n", (int)(pc-cur+1), cur);
+ break;
+ }
+
+ if ((cur = strchr(cur, ARG_SEP)) != NULL)
+ ++cur;
+ }
+#endif /* SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT */
+ return 1;
+}
+
+/*===================================================================
+**
+** Get device queue depth from boot command line.
+**
+**===================================================================
+*/
+#define DEF_DEPTH (driver_setup.default_tags)
+#define ALL_TARGETS -2
+#define NO_TARGET -1
+#define ALL_LUNS -2
+#define NO_LUN -1
+
+static int device_queue_depth(int unit, int target, int lun)
+{
+ int c, h, t, u, v;
+ char *p = driver_setup.tag_ctrl;
+ char *ep;
+
+ h = -1;
+ t = NO_TARGET;
+ u = NO_LUN;
+ while ((c = *p++) != 0) {
+ v = simple_strtoul(p, &ep, 0);
+ switch(c) {
+ case '/':
+ ++h;
+ t = ALL_TARGETS;
+ u = ALL_LUNS;
+ break;
+ case 't':
+ if (t != target)
+ t = (target == v) ? v : NO_TARGET;
+ u = ALL_LUNS;
+ break;
+ case 'u':
+ if (u != lun)
+ u = (lun == v) ? v : NO_LUN;
+ break;
+ case 'q':
+ if (h == unit &&
+ (t == ALL_TARGETS || t == target) &&
+ (u == ALL_LUNS || u == lun))
+ return v;
+ break;
+ case '-':
+ t = ALL_TARGETS;
+ u = ALL_LUNS;
+ break;
+ default:
+ break;
+ }
+ p = ep;
+ }
+ return DEF_DEPTH;
+}
/*==========================================================
diff --git a/drivers/scsi/ncr53c8xx.h b/drivers/scsi/ncr53c8xx.h
index 05c7b83cef0..6a7bef2e611 100644
--- a/drivers/scsi/ncr53c8xx.h
+++ b/drivers/scsi/ncr53c8xx.h
@@ -2,6 +2,7 @@
** Device driver for the PCI-SCSI NCR538XX controller family.
**
** Copyright (C) 1994 Wolfgang Stanglmeier
+** Copyright (C) 1998-2001 Gerard Roudier <groudier@free.fr>
**
** This program is free software; you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
@@ -36,15 +37,1275 @@
** And has been ported to NetBSD by
** Charles M. Hannum <mycroft@gnu.ai.mit.edu>
**
+** NVRAM detection and reading.
+** Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
+**
+** Added support for MIPS big endian systems.
+** Carsten Langgaard, carstenl@mips.com
+** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+**
+** Added support for HP PARISC big endian systems.
+** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
+**
*******************************************************************************
*/
#ifndef NCR53C8XX_H
#define NCR53C8XX_H
+#include <linux/config.h>
#include <scsi/scsi_host.h>
-#include "sym53c8xx_defs.h"
+/*
+** If you want a driver as small as possible, do not define the
+** following options.
+*/
+#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
+#define SCSI_NCR_DEBUG_INFO_SUPPORT
+
+/*
+** To disable integrity checking, do not define the
+** following option.
+*/
+#ifdef CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK
+# define SCSI_NCR_ENABLE_INTEGRITY_CHECK
+#endif
+
+/* ---------------------------------------------------------------------
+** Take into account kernel configured parameters.
+** Most of these options can be overridden at startup by a command line.
+** ---------------------------------------------------------------------
+*/
+
+/*
+ * For Ultra2 and Ultra3 SCSI support option, use special features.
+ *
+ * Value (default) means:
+ * bit 0 : all features enabled, except:
+ * bit 1 : PCI Write And Invalidate.
+ * bit 2 : Data Phase Mismatch handling from SCRIPTS.
+ *
+ * Use boot options ncr53c8xx=specf:1 if you want all chip features to be
+ * enabled by the driver.
+ */
+#define SCSI_NCR_SETUP_SPECIAL_FEATURES (3)
+
+#define SCSI_NCR_MAX_SYNC (80)
+
+/*
+ * Allow tags from 2 to 256, default 8
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_MAX_TAGS
+#if CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2
+#define SCSI_NCR_MAX_TAGS (2)
+#elif CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256
+#define SCSI_NCR_MAX_TAGS (256)
+#else
+#define SCSI_NCR_MAX_TAGS CONFIG_SCSI_NCR53C8XX_MAX_TAGS
+#endif
+#else
+#define SCSI_NCR_MAX_TAGS (8)
+#endif
+
+/*
+ * Allow tagged command queuing support if configured with default number
+ * of tags set to max (see above).
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
+#define SCSI_NCR_SETUP_DEFAULT_TAGS CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
+#elif defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE
+#define SCSI_NCR_SETUP_DEFAULT_TAGS SCSI_NCR_MAX_TAGS
+#else
+#define SCSI_NCR_SETUP_DEFAULT_TAGS (0)
+#endif
+
+/*
+ * Immediate arbitration
+ */
+#if defined(CONFIG_SCSI_NCR53C8XX_IARB)
+#define SCSI_NCR_IARB_SUPPORT
+#endif
+
+/*
+ * Sync transfer frequency at startup.
+ * Allow from 5Mhz to 80Mhz default 20 Mhz.
+ */
+#ifndef CONFIG_SCSI_NCR53C8XX_SYNC
+#define CONFIG_SCSI_NCR53C8XX_SYNC (20)
+#elif CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC
+#undef CONFIG_SCSI_NCR53C8XX_SYNC
+#define CONFIG_SCSI_NCR53C8XX_SYNC SCSI_NCR_MAX_SYNC
+#endif
+
+#if CONFIG_SCSI_NCR53C8XX_SYNC == 0
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (255)
+#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 5
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (50)
+#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 20
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (250/(CONFIG_SCSI_NCR53C8XX_SYNC))
+#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 33
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (11)
+#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 40
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (10)
+#else
+#define SCSI_NCR_SETUP_DEFAULT_SYNC (9)
+#endif
+
+/*
+ * Disallow disconnections at boot-up
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
+#define SCSI_NCR_SETUP_DISCONNECTION (0)
+#else
+#define SCSI_NCR_SETUP_DISCONNECTION (1)
+#endif
+
+/*
+ * Force synchronous negotiation for all targets
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO
+#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (1)
+#else
+#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (0)
+#endif
+
+/*
+ * Disable master parity checking (flawed hardwares need that)
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK
+#define SCSI_NCR_SETUP_MASTER_PARITY (0)
+#else
+#define SCSI_NCR_SETUP_MASTER_PARITY (1)
+#endif
+
+/*
+ * Disable scsi parity checking (flawed devices may need that)
+ */
+#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK
+#define SCSI_NCR_SETUP_SCSI_PARITY (0)
+#else
+#define SCSI_NCR_SETUP_SCSI_PARITY (1)
+#endif
+
+/*
+ * Settle time after reset at boot-up
+ */
+#define SCSI_NCR_SETUP_SETTLE_TIME (2)
+
+/*
+** Bridge quirks work-around option defaulted to 1.
+*/
+#ifndef SCSI_NCR_PCIQ_WORK_AROUND_OPT
+#define SCSI_NCR_PCIQ_WORK_AROUND_OPT 1
+#endif
+
+/*
+** Work-around common bridge misbehaviour.
+**
+** - Do not flush posted writes in the opposite
+** direction on read.
+** - May reorder DMA writes to memory.
+**
+** This option should not affect performances
+** significantly, so it is the default.
+*/
+#if SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1
+#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
+#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
+#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
+
+/*
+** Same as option 1, but also deal with
+** misconfigured interrupts.
+**
+** - Edge triggerred instead of level sensitive.
+** - No interrupt line connected.
+** - IRQ number misconfigured.
+**
+** If no interrupt is delivered, the driver will
+** catch the interrupt conditions 10 times per
+** second. No need to say that this option is
+** not recommended.
+*/
+#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2
+#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
+#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
+#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
+#define SCSI_NCR_PCIQ_BROKEN_INTR
+
+/*
+** Some bridge designers decided to flush
+** everything prior to deliver the interrupt.
+** This option tries to deal with such a
+** behaviour.
+*/
+#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3
+#define SCSI_NCR_PCIQ_SYNC_ON_INTR
+#endif
+
+/*
+** Other parameters not configurable with "make config"
+** Avoid to change these constants, unless you know what you are doing.
+*/
+
+#define SCSI_NCR_ALWAYS_SIMPLE_TAG
+#define SCSI_NCR_MAX_SCATTER (127)
+#define SCSI_NCR_MAX_TARGET (16)
+
+/*
+** Compute some desirable value for CAN_QUEUE
+** and CMD_PER_LUN.
+** The driver will use lower values if these
+** ones appear to be too large.
+*/
+#define SCSI_NCR_CAN_QUEUE (8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET)
+#define SCSI_NCR_CMD_PER_LUN (SCSI_NCR_MAX_TAGS)
+
+#define SCSI_NCR_SG_TABLESIZE (SCSI_NCR_MAX_SCATTER)
+#define SCSI_NCR_TIMER_INTERVAL (HZ)
+
+#if 1 /* defined CONFIG_SCSI_MULTI_LUN */
+#define SCSI_NCR_MAX_LUN (16)
+#else
+#define SCSI_NCR_MAX_LUN (1)
+#endif
+
+/*
+ * IO functions definition for big/little endian CPU support.
+ * For now, the NCR is only supported in little endian addressing mode,
+ */
+
+#ifdef __BIG_ENDIAN
+
+#define inw_l2b inw
+#define inl_l2b inl
+#define outw_b2l outw
+#define outl_b2l outl
+
+#define readb_raw readb
+#define writeb_raw writeb
+
+#if defined(SCSI_NCR_BIG_ENDIAN)
+#define readw_l2b __raw_readw
+#define readl_l2b __raw_readl
+#define writew_b2l __raw_writew
+#define writel_b2l __raw_writel
+#define readw_raw __raw_readw
+#define readl_raw __raw_readl
+#define writew_raw __raw_writew
+#define writel_raw __raw_writel
+#else /* Other big-endian */
+#define readw_l2b readw
+#define readl_l2b readl
+#define writew_b2l writew
+#define writel_b2l writel
+#define readw_raw readw
+#define readl_raw readl
+#define writew_raw writew
+#define writel_raw writel
+#endif
+
+#else /* little endian */
+
+#define inw_raw inw
+#define inl_raw inl
+#define outw_raw outw
+#define outl_raw outl
+
+#define readb_raw readb
+#define readw_raw readw
+#define readl_raw readl
+#define writeb_raw writeb
+#define writew_raw writew
+#define writel_raw writel
+
+#endif
+
+#if !defined(__hppa__) && !defined(__mips__)
+#ifdef SCSI_NCR_BIG_ENDIAN
+#error "The NCR in BIG ENDIAN addressing mode is not (yet) supported"
+#endif
+#endif
+
+#define MEMORY_BARRIER() mb()
+
+
+/*
+ * If the NCR uses big endian addressing mode over the
+ * PCI, actual io register addresses for byte and word
+ * accesses must be changed according to lane routing.
+ * Btw, ncr_offb() and ncr_offw() macros only apply to
+ * constants and so donnot generate bloated code.
+ */
+
+#if defined(SCSI_NCR_BIG_ENDIAN)
+
+#define ncr_offb(o) (((o)&~3)+((~((o)&3))&3))
+#define ncr_offw(o) (((o)&~3)+((~((o)&3))&2))
+
+#else
+
+#define ncr_offb(o) (o)
+#define ncr_offw(o) (o)
+
+#endif
+
+/*
+ * If the CPU and the NCR use same endian-ness addressing,
+ * no byte reordering is needed for script patching.
+ * Macro cpu_to_scr() is to be used for script patching.
+ * Macro scr_to_cpu() is to be used for getting a DWORD
+ * from the script.
+ */
+
+#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
+
+#define cpu_to_scr(dw) cpu_to_le32(dw)
+#define scr_to_cpu(dw) le32_to_cpu(dw)
+
+#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
+
+#define cpu_to_scr(dw) cpu_to_be32(dw)
+#define scr_to_cpu(dw) be32_to_cpu(dw)
+
+#else
+
+#define cpu_to_scr(dw) (dw)
+#define scr_to_cpu(dw) (dw)
+
+#endif
+
+/*
+ * Access to the controller chip.
+ *
+ * If the CPU and the NCR use same endian-ness addressing,
+ * no byte reordering is needed for accessing chip io
+ * registers. Functions suffixed by '_raw' are assumed
+ * to access the chip over the PCI without doing byte
+ * reordering. Functions suffixed by '_l2b' are
+ * assumed to perform little-endian to big-endian byte
+ * reordering, those suffixed by '_b2l' blah, blah,
+ * blah, ...
+ */
+
+/*
+ * MEMORY mapped IO input / output
+ */
+
+#define INB_OFF(o) readb_raw((char __iomem *)np->reg + ncr_offb(o))
+#define OUTB_OFF(o, val) writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o))
+
+#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
+
+#define INW_OFF(o) readw_l2b((char __iomem *)np->reg + ncr_offw(o))
+#define INL_OFF(o) readl_l2b((char __iomem *)np->reg + (o))
+
+#define OUTW_OFF(o, val) writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o))
+#define OUTL_OFF(o, val) writel_b2l((val), (char __iomem *)np->reg + (o))
+
+#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
+
+#define INW_OFF(o) readw_b2l((char __iomem *)np->reg + ncr_offw(o))
+#define INL_OFF(o) readl_b2l((char __iomem *)np->reg + (o))
+
+#define OUTW_OFF(o, val) writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o))
+#define OUTL_OFF(o, val) writel_l2b((val), (char __iomem *)np->reg + (o))
+
+#else
+
+#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
+/* Only 8 or 32 bit transfers allowed */
+#define INW_OFF(o) (readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1))
+#else
+#define INW_OFF(o) readw_raw((char __iomem *)np->reg + ncr_offw(o))
+#endif
+#define INL_OFF(o) readl_raw((char __iomem *)np->reg + (o))
+
+#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
+/* Only 8 or 32 bit transfers allowed */
+#define OUTW_OFF(o, val) do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0)
+#else
+#define OUTW_OFF(o, val) writew_raw((val), (char __iomem *)np->reg + ncr_offw(o))
+#endif
+#define OUTL_OFF(o, val) writel_raw((val), (char __iomem *)np->reg + (o))
+
+#endif
+
+#define INB(r) INB_OFF (offsetof(struct ncr_reg,r))
+#define INW(r) INW_OFF (offsetof(struct ncr_reg,r))
+#define INL(r) INL_OFF (offsetof(struct ncr_reg,r))
+
+#define OUTB(r, val) OUTB_OFF (offsetof(struct ncr_reg,r), (val))
+#define OUTW(r, val) OUTW_OFF (offsetof(struct ncr_reg,r), (val))
+#define OUTL(r, val) OUTL_OFF (offsetof(struct ncr_reg,r), (val))
+
+/*
+ * Set bit field ON, OFF
+ */
+
+#define OUTONB(r, m) OUTB(r, INB(r) | (m))
+#define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m))
+#define OUTONW(r, m) OUTW(r, INW(r) | (m))
+#define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m))
+#define OUTONL(r, m) OUTL(r, INL(r) | (m))
+#define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m))
+
+/*
+ * We normally want the chip to have a consistent view
+ * of driver internal data structures when we restart it.
+ * Thus these macros.
+ */
+#define OUTL_DSP(v) \
+ do { \
+ MEMORY_BARRIER(); \
+ OUTL (nc_dsp, (v)); \
+ } while (0)
+
+#define OUTONB_STD() \
+ do { \
+ MEMORY_BARRIER(); \
+ OUTONB (nc_dcntl, (STD|NOCOM)); \
+ } while (0)
+
+
+/*
+** NCR53C8XX devices features table.
+*/
+struct ncr_chip {
+ unsigned short revision_id;
+ unsigned char burst_max; /* log-base-2 of max burst */
+ unsigned char offset_max;
+ unsigned char nr_divisor;
+ unsigned int features;
+#define FE_LED0 (1<<0)
+#define FE_WIDE (1<<1) /* Wide data transfers */
+#define FE_ULTRA (1<<2) /* Ultra speed 20Mtrans/sec */
+#define FE_DBLR (1<<4) /* Clock doubler present */
+#define FE_QUAD (1<<5) /* Clock quadrupler present */
+#define FE_ERL (1<<6) /* Enable read line */
+#define FE_CLSE (1<<7) /* Cache line size enable */
+#define FE_WRIE (1<<8) /* Write & Invalidate enable */
+#define FE_ERMP (1<<9) /* Enable read multiple */
+#define FE_BOF (1<<10) /* Burst opcode fetch */
+#define FE_DFS (1<<11) /* DMA fifo size */
+#define FE_PFEN (1<<12) /* Prefetch enable */
+#define FE_LDSTR (1<<13) /* Load/Store supported */
+#define FE_RAM (1<<14) /* On chip RAM present */
+#define FE_VARCLK (1<<15) /* SCSI clock may vary */
+#define FE_RAM8K (1<<16) /* On chip RAM sized 8Kb */
+#define FE_64BIT (1<<17) /* Have a 64-bit PCI interface */
+#define FE_IO256 (1<<18) /* Requires full 256 bytes in PCI space */
+#define FE_NOPM (1<<19) /* Scripts handles phase mismatch */
+#define FE_LEDC (1<<20) /* Hardware control of LED */
+#define FE_DIFF (1<<21) /* Support Differential SCSI */
+#define FE_66MHZ (1<<23) /* 66MHz PCI Support */
+#define FE_DAC (1<<24) /* Support DAC cycles (64 bit addressing) */
+#define FE_ISTAT1 (1<<25) /* Have ISTAT1, MBOX0, MBOX1 registers */
+#define FE_DAC_IN_USE (1<<26) /* Platform does DAC cycles */
+#define FE_EHP (1<<27) /* 720: Even host parity */
+#define FE_MUX (1<<28) /* 720: Multiplexed bus */
+#define FE_EA (1<<29) /* 720: Enable Ack */
+
+#define FE_CACHE_SET (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP)
+#define FE_SCSI_SET (FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80)
+#define FE_SPECIAL_SET (FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM)
+};
+
+
+/*
+** Driver setup structure.
+**
+** This structure is initialized from linux config options.
+** It can be overridden at boot-up by the boot command line.
+*/
+#define SCSI_NCR_MAX_EXCLUDES 8
+struct ncr_driver_setup {
+ u8 master_parity;
+ u8 scsi_parity;
+ u8 disconnection;
+ u8 special_features;
+ u8 force_sync_nego;
+ u8 reverse_probe;
+ u8 pci_fix_up;
+ u8 use_nvram;
+ u8 verbose;
+ u8 default_tags;
+ u16 default_sync;
+ u16 debug;
+ u8 burst_max;
+ u8 led_pin;
+ u8 max_wide;
+ u8 settle_delay;
+ u8 diff_support;
+ u8 irqm;
+ u8 bus_check;
+ u8 optimize;
+ u8 recovery;
+ u8 host_id;
+ u16 iarb;
+ u32 excludes[SCSI_NCR_MAX_EXCLUDES];
+ char tag_ctrl[100];
+};
+
+/*
+** Initial setup.
+** Can be overriden at startup by a command line.
+*/
+#define SCSI_NCR_DRIVER_SETUP \
+{ \
+ SCSI_NCR_SETUP_MASTER_PARITY, \
+ SCSI_NCR_SETUP_SCSI_PARITY, \
+ SCSI_NCR_SETUP_DISCONNECTION, \
+ SCSI_NCR_SETUP_SPECIAL_FEATURES, \
+ SCSI_NCR_SETUP_FORCE_SYNC_NEGO, \
+ 0, \
+ 0, \
+ 1, \
+ 0, \
+ SCSI_NCR_SETUP_DEFAULT_TAGS, \
+ SCSI_NCR_SETUP_DEFAULT_SYNC, \
+ 0x00, \
+ 7, \
+ 0, \
+ 1, \
+ SCSI_NCR_SETUP_SETTLE_TIME, \
+ 0, \
+ 0, \
+ 1, \
+ 0, \
+ 0, \
+ 255, \
+ 0x00 \
+}
+
+/*
+** Boot fail safe setup.
+** Override initial setup from boot command line:
+** ncr53c8xx=safe:y
+*/
+#define SCSI_NCR_DRIVER_SAFE_SETUP \
+{ \
+ 0, \
+ 1, \
+ 0, \
+ 0, \
+ 0, \
+ 0, \
+ 0, \
+ 1, \
+ 2, \
+ 0, \
+ 255, \
+ 0x00, \
+ 255, \
+ 0, \
+ 0, \
+ 10, \
+ 1, \
+ 1, \
+ 1, \
+ 0, \
+ 0, \
+ 255 \
+}
+
+/**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/
+
+/*-----------------------------------------------------------------
+**
+** The ncr 53c810 register structure.
+**
+**-----------------------------------------------------------------
+*/
+
+struct ncr_reg {
+/*00*/ u8 nc_scntl0; /* full arb., ena parity, par->ATN */
+
+/*01*/ u8 nc_scntl1; /* no reset */
+ #define ISCON 0x10 /* connected to scsi */
+ #define CRST 0x08 /* force reset */
+ #define IARB 0x02 /* immediate arbitration */
+
+/*02*/ u8 nc_scntl2; /* no disconnect expected */
+ #define SDU 0x80 /* cmd: disconnect will raise error */
+ #define CHM 0x40 /* sta: chained mode */
+ #define WSS 0x08 /* sta: wide scsi send [W]*/
+ #define WSR 0x01 /* sta: wide scsi received [W]*/
+
+/*03*/ u8 nc_scntl3; /* cnf system clock dependent */
+ #define EWS 0x08 /* cmd: enable wide scsi [W]*/
+ #define ULTRA 0x80 /* cmd: ULTRA enable */
+ /* bits 0-2, 7 rsvd for C1010 */
+
+/*04*/ u8 nc_scid; /* cnf host adapter scsi address */
+ #define RRE 0x40 /* r/w:e enable response to resel. */
+ #define SRE 0x20 /* r/w:e enable response to select */
+
+/*05*/ u8 nc_sxfer; /* ### Sync speed and count */
+ /* bits 6-7 rsvd for C1010 */
+
+/*06*/ u8 nc_sdid; /* ### Destination-ID */
+
+/*07*/ u8 nc_gpreg; /* ??? IO-Pins */
+
+/*08*/ u8 nc_sfbr; /* ### First byte in phase */
+
+/*09*/ u8 nc_socl;
+ #define CREQ 0x80 /* r/w: SCSI-REQ */
+ #define CACK 0x40 /* r/w: SCSI-ACK */
+ #define CBSY 0x20 /* r/w: SCSI-BSY */
+ #define CSEL 0x10 /* r/w: SCSI-SEL */
+ #define CATN 0x08 /* r/w: SCSI-ATN */
+ #define CMSG 0x04 /* r/w: SCSI-MSG */
+ #define CC_D 0x02 /* r/w: SCSI-C_D */
+ #define CI_O 0x01 /* r/w: SCSI-I_O */
+
+/*0a*/ u8 nc_ssid;
+
+/*0b*/ u8 nc_sbcl;
+
+/*0c*/ u8 nc_dstat;
+ #define DFE 0x80 /* sta: dma fifo empty */
+ #define MDPE 0x40 /* int: master data parity error */
+ #define BF 0x20 /* int: script: bus fault */
+ #define ABRT 0x10 /* int: script: command aborted */
+ #define SSI 0x08 /* int: script: single step */
+ #define SIR 0x04 /* int: script: interrupt instruct. */
+ #define IID 0x01 /* int: script: illegal instruct. */
+
+/*0d*/ u8 nc_sstat0;
+ #define ILF 0x80 /* sta: data in SIDL register lsb */
+ #define ORF 0x40 /* sta: data in SODR register lsb */
+ #define OLF 0x20 /* sta: data in SODL register lsb */
+ #define AIP 0x10 /* sta: arbitration in progress */
+ #define LOA 0x08 /* sta: arbitration lost */
+ #define WOA 0x04 /* sta: arbitration won */
+ #define IRST 0x02 /* sta: scsi reset signal */
+ #define SDP 0x01 /* sta: scsi parity signal */
+
+/*0e*/ u8 nc_sstat1;
+ #define FF3210 0xf0 /* sta: bytes in the scsi fifo */
+
+/*0f*/ u8 nc_sstat2;
+ #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
+ #define ORF1 0x40 /* sta: data in SODR register msb[W]*/
+ #define OLF1 0x20 /* sta: data in SODL register msb[W]*/
+ #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */
+ #define LDSC 0x02 /* sta: disconnect & reconnect */
+
+/*10*/ u8 nc_dsa; /* --> Base page */
+/*11*/ u8 nc_dsa1;
+/*12*/ u8 nc_dsa2;
+/*13*/ u8 nc_dsa3;
+
+/*14*/ u8 nc_istat; /* --> Main Command and status */
+ #define CABRT 0x80 /* cmd: abort current operation */
+ #define SRST 0x40 /* mod: reset chip */
+ #define SIGP 0x20 /* r/w: message from host to ncr */
+ #define SEM 0x10 /* r/w: message between host + ncr */
+ #define CON 0x08 /* sta: connected to scsi */
+ #define INTF 0x04 /* sta: int on the fly (reset by wr)*/
+ #define SIP 0x02 /* sta: scsi-interrupt */
+ #define DIP 0x01 /* sta: host/script interrupt */
+
+/*15*/ u8 nc_istat1; /* 896 and later cores only */
+ #define FLSH 0x04 /* sta: chip is flushing */
+ #define SRUN 0x02 /* sta: scripts are running */
+ #define SIRQD 0x01 /* r/w: disable INT pin */
+
+/*16*/ u8 nc_mbox0; /* 896 and later cores only */
+/*17*/ u8 nc_mbox1; /* 896 and later cores only */
+
+/*18*/ u8 nc_ctest0;
+ #define EHP 0x04 /* 720 even host parity */
+/*19*/ u8 nc_ctest1;
+
+/*1a*/ u8 nc_ctest2;
+ #define CSIGP 0x40
+ /* bits 0-2,7 rsvd for C1010 */
+
+/*1b*/ u8 nc_ctest3;
+ #define FLF 0x08 /* cmd: flush dma fifo */
+ #define CLF 0x04 /* cmd: clear dma fifo */
+ #define FM 0x02 /* mod: fetch pin mode */
+ #define WRIE 0x01 /* mod: write and invalidate enable */
+ /* bits 4-7 rsvd for C1010 */
+
+/*1c*/ u32 nc_temp; /* ### Temporary stack */
+
+/*20*/ u8 nc_dfifo;
+/*21*/ u8 nc_ctest4;
+ #define MUX 0x80 /* 720 host bus multiplex mode */
+ #define BDIS 0x80 /* mod: burst disable */
+ #define MPEE 0x08 /* mod: master parity error enable */
+
+/*22*/ u8 nc_ctest5;
+ #define DFS 0x20 /* mod: dma fifo size */
+ /* bits 0-1, 3-7 rsvd for C1010 */
+/*23*/ u8 nc_ctest6;
+
+/*24*/ u32 nc_dbc; /* ### Byte count and command */
+/*28*/ u32 nc_dnad; /* ### Next command register */
+/*2c*/ u32 nc_dsp; /* --> Script Pointer */
+/*30*/ u32 nc_dsps; /* --> Script pointer save/opcode#2 */
+
+/*34*/ u8 nc_scratcha; /* Temporary register a */
+/*35*/ u8 nc_scratcha1;
+/*36*/ u8 nc_scratcha2;
+/*37*/ u8 nc_scratcha3;
+
+/*38*/ u8 nc_dmode;
+ #define BL_2 0x80 /* mod: burst length shift value +2 */
+ #define BL_1 0x40 /* mod: burst length shift value +1 */
+ #define ERL 0x08 /* mod: enable read line */
+ #define ERMP 0x04 /* mod: enable read multiple */
+ #define BOF 0x02 /* mod: burst op code fetch */
+
+/*39*/ u8 nc_dien;
+/*3a*/ u8 nc_sbr;
+
+/*3b*/ u8 nc_dcntl; /* --> Script execution control */
+ #define CLSE 0x80 /* mod: cache line size enable */
+ #define PFF 0x40 /* cmd: pre-fetch flush */
+ #define PFEN 0x20 /* mod: pre-fetch enable */
+ #define EA 0x20 /* mod: 720 enable-ack */
+ #define SSM 0x10 /* mod: single step mode */
+ #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
+ #define STD 0x04 /* cmd: start dma mode */
+ #define IRQD 0x02 /* mod: irq disable */
+ #define NOCOM 0x01 /* cmd: protect sfbr while reselect */
+ /* bits 0-1 rsvd for C1010 */
+
+/*3c*/ u32 nc_adder;
+
+/*40*/ u16 nc_sien; /* -->: interrupt enable */
+/*42*/ u16 nc_sist; /* <--: interrupt status */
+ #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
+ #define STO 0x0400/* sta: timeout (select) */
+ #define GEN 0x0200/* sta: timeout (general) */
+ #define HTH 0x0100/* sta: timeout (handshake) */
+ #define MA 0x80 /* sta: phase mismatch */
+ #define CMP 0x40 /* sta: arbitration complete */
+ #define SEL 0x20 /* sta: selected by another device */
+ #define RSL 0x10 /* sta: reselected by another device*/
+ #define SGE 0x08 /* sta: gross error (over/underflow)*/
+ #define UDC 0x04 /* sta: unexpected disconnect */
+ #define RST 0x02 /* sta: scsi bus reset detected */
+ #define PAR 0x01 /* sta: scsi parity error */
+
+/*44*/ u8 nc_slpar;
+/*45*/ u8 nc_swide;
+/*46*/ u8 nc_macntl;
+/*47*/ u8 nc_gpcntl;
+/*48*/ u8 nc_stime0; /* cmd: timeout for select&handshake*/
+/*49*/ u8 nc_stime1; /* cmd: timeout user defined */
+/*4a*/ u16 nc_respid; /* sta: Reselect-IDs */
+
+/*4c*/ u8 nc_stest0;
+
+/*4d*/ u8 nc_stest1;
+ #define SCLK 0x80 /* Use the PCI clock as SCSI clock */
+ #define DBLEN 0x08 /* clock doubler running */
+ #define DBLSEL 0x04 /* clock doubler selected */
+
+
+/*4e*/ u8 nc_stest2;
+ #define ROF 0x40 /* reset scsi offset (after gross error!) */
+ #define DIF 0x20 /* 720 SCSI differential mode */
+ #define EXT 0x02 /* extended filtering */
+
+/*4f*/ u8 nc_stest3;
+ #define TE 0x80 /* c: tolerAnt enable */
+ #define HSC 0x20 /* c: Halt SCSI Clock */
+ #define CSF 0x02 /* c: clear scsi fifo */
+
+/*50*/ u16 nc_sidl; /* Lowlevel: latched from scsi data */
+/*52*/ u8 nc_stest4;
+ #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
+ #define SMODE_HVD 0x40 /* High Voltage Differential */
+ #define SMODE_SE 0x80 /* Single Ended */
+ #define SMODE_LVD 0xc0 /* Low Voltage Differential */
+ #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */
+ /* bits 0-5 rsvd for C1010 */
+
+/*53*/ u8 nc_53_;
+/*54*/ u16 nc_sodl; /* Lowlevel: data out to scsi data */
+/*56*/ u8 nc_ccntl0; /* Chip Control 0 (896) */
+ #define ENPMJ 0x80 /* Enable Phase Mismatch Jump */
+ #define PMJCTL 0x40 /* Phase Mismatch Jump Control */
+ #define ENNDJ 0x20 /* Enable Non Data PM Jump */
+ #define DISFC 0x10 /* Disable Auto FIFO Clear */
+ #define DILS 0x02 /* Disable Internal Load/Store */
+ #define DPR 0x01 /* Disable Pipe Req */
+
+/*57*/ u8 nc_ccntl1; /* Chip Control 1 (896) */
+ #define ZMOD 0x80 /* High Impedance Mode */
+ #define DIC 0x10 /* Disable Internal Cycles */
+ #define DDAC 0x08 /* Disable Dual Address Cycle */
+ #define XTIMOD 0x04 /* 64-bit Table Ind. Indexing Mode */
+ #define EXTIBMV 0x02 /* Enable 64-bit Table Ind. BMOV */
+ #define EXDBMV 0x01 /* Enable 64-bit Direct BMOV */
+
+/*58*/ u16 nc_sbdl; /* Lowlevel: data from scsi data */
+/*5a*/ u16 nc_5a_;
+
+/*5c*/ u8 nc_scr0; /* Working register B */
+/*5d*/ u8 nc_scr1; /* */
+/*5e*/ u8 nc_scr2; /* */
+/*5f*/ u8 nc_scr3; /* */
+
+/*60*/ u8 nc_scrx[64]; /* Working register C-R */
+/*a0*/ u32 nc_mmrs; /* Memory Move Read Selector */
+/*a4*/ u32 nc_mmws; /* Memory Move Write Selector */
+/*a8*/ u32 nc_sfs; /* Script Fetch Selector */
+/*ac*/ u32 nc_drs; /* DSA Relative Selector */
+/*b0*/ u32 nc_sbms; /* Static Block Move Selector */
+/*b4*/ u32 nc_dbms; /* Dynamic Block Move Selector */
+/*b8*/ u32 nc_dnad64; /* DMA Next Address 64 */
+/*bc*/ u16 nc_scntl4; /* C1010 only */
+ #define U3EN 0x80 /* Enable Ultra 3 */
+ #define AIPEN 0x40 /* Allow check upper byte lanes */
+ #define XCLKH_DT 0x08 /* Extra clock of data hold on DT
+ transfer edge */
+ #define XCLKH_ST 0x04 /* Extra clock of data hold on ST
+ transfer edge */
+
+/*be*/ u8 nc_aipcntl0; /* Epat Control 1 C1010 only */
+/*bf*/ u8 nc_aipcntl1; /* AIP Control C1010_66 Only */
+
+/*c0*/ u32 nc_pmjad1; /* Phase Mismatch Jump Address 1 */
+/*c4*/ u32 nc_pmjad2; /* Phase Mismatch Jump Address 2 */
+/*c8*/ u8 nc_rbc; /* Remaining Byte Count */
+/*c9*/ u8 nc_rbc1; /* */
+/*ca*/ u8 nc_rbc2; /* */
+/*cb*/ u8 nc_rbc3; /* */
+
+/*cc*/ u8 nc_ua; /* Updated Address */
+/*cd*/ u8 nc_ua1; /* */
+/*ce*/ u8 nc_ua2; /* */
+/*cf*/ u8 nc_ua3; /* */
+/*d0*/ u32 nc_esa; /* Entry Storage Address */
+/*d4*/ u8 nc_ia; /* Instruction Address */
+/*d5*/ u8 nc_ia1;
+/*d6*/ u8 nc_ia2;
+/*d7*/ u8 nc_ia3;
+/*d8*/ u32 nc_sbc; /* SCSI Byte Count (3 bytes only) */
+/*dc*/ u32 nc_csbc; /* Cumulative SCSI Byte Count */
+
+ /* Following for C1010 only */
+/*e0*/ u16 nc_crcpad; /* CRC Value */
+/*e2*/ u8 nc_crccntl0; /* CRC control register */
+ #define SNDCRC 0x10 /* Send CRC Request */
+/*e3*/ u8 nc_crccntl1; /* CRC control register */
+/*e4*/ u32 nc_crcdata; /* CRC data register */
+/*e8*/ u32 nc_e8_; /* rsvd */
+/*ec*/ u32 nc_ec_; /* rsvd */
+/*f0*/ u16 nc_dfbc; /* DMA FIFO byte count */
+
+};
+
+/*-----------------------------------------------------------
+**
+** Utility macros for the script.
+**
+**-----------------------------------------------------------
+*/
+
+#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
+#define REG(r) REGJ (nc_, r)
+
+typedef u32 ncrcmd;
+
+/*-----------------------------------------------------------
+**
+** SCSI phases
+**
+** DT phases illegal for ncr driver.
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_DATA_OUT 0x00000000
+#define SCR_DATA_IN 0x01000000
+#define SCR_COMMAND 0x02000000
+#define SCR_STATUS 0x03000000
+#define SCR_DT_DATA_OUT 0x04000000
+#define SCR_DT_DATA_IN 0x05000000
+#define SCR_MSG_OUT 0x06000000
+#define SCR_MSG_IN 0x07000000
+
+#define SCR_ILG_OUT 0x04000000
+#define SCR_ILG_IN 0x05000000
+
+/*-----------------------------------------------------------
+**
+** Data transfer via SCSI.
+**
+**-----------------------------------------------------------
+**
+** MOVE_ABS (LEN)
+** <<start address>>
+**
+** MOVE_IND (LEN)
+** <<dnad_offset>>
+**
+** MOVE_TBL
+** <<dnad_offset>>
+**
+**-----------------------------------------------------------
+*/
+
+#define OPC_MOVE 0x08000000
+
+#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
+#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
+#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE)
+
+#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
+#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
+#define SCR_CHMOV_TBL (0x10000000)
+
+struct scr_tblmove {
+ u32 size;
+ u32 addr;
+};
+
+/*-----------------------------------------------------------
+**
+** Selection
+**
+**-----------------------------------------------------------
+**
+** SEL_ABS | SCR_ID (0..15) [ | REL_JMP]
+** <<alternate_address>>
+**
+** SEL_TBL | << dnad_offset>> [ | REL_JMP]
+** <<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_SEL_ABS 0x40000000
+#define SCR_SEL_ABS_ATN 0x41000000
+#define SCR_SEL_TBL 0x42000000
+#define SCR_SEL_TBL_ATN 0x43000000
+
+
+#ifdef SCSI_NCR_BIG_ENDIAN
+struct scr_tblsel {
+ u8 sel_scntl3;
+ u8 sel_id;
+ u8 sel_sxfer;
+ u8 sel_scntl4;
+};
+#else
+struct scr_tblsel {
+ u8 sel_scntl4;
+ u8 sel_sxfer;
+ u8 sel_id;
+ u8 sel_scntl3;
+};
+#endif
+
+#define SCR_JMP_REL 0x04000000
+#define SCR_ID(id) (((u32)(id)) << 16)
+
+/*-----------------------------------------------------------
+**
+** Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+** WAIT_DISC
+** dummy: <<alternate_address>>
+**
+** WAIT_RESEL
+** <<alternate_address>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_WAIT_DISC 0x48000000
+#define SCR_WAIT_RESEL 0x50000000
+
+/*-----------------------------------------------------------
+**
+** Bit Set / Reset
+**
+**-----------------------------------------------------------
+**
+** SET (flags {|.. })
+**
+** CLR (flags {|.. })
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_SET(f) (0x58000000 | (f))
+#define SCR_CLR(f) (0x60000000 | (f))
+
+#define SCR_CARRY 0x00000400
+#define SCR_TRG 0x00000200
+#define SCR_ACK 0x00000040
+#define SCR_ATN 0x00000008
+
+
+
+
+/*-----------------------------------------------------------
+**
+** Memory to memory move
+**
+**-----------------------------------------------------------
+**
+** COPY (bytecount)
+** << source_address >>
+** << destination_address >>
+**
+** SCR_COPY sets the NO FLUSH option by default.
+** SCR_COPY_F does not set this option.
+**
+** For chips which do not support this option,
+** ncr_copy_and_bind() will remove this bit.
+**-----------------------------------------------------------
+*/
+
+#define SCR_NO_FLUSH 0x01000000
+
+#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
+#define SCR_COPY_F(n) (0xc0000000 | (n))
+
+/*-----------------------------------------------------------
+**
+** Register move and binary operations
+**
+**-----------------------------------------------------------
+**
+** SFBR_REG (reg, op, data) reg = SFBR op data
+** << 0 >>
+**
+** REG_SFBR (reg, op, data) SFBR = reg op data
+** << 0 >>
+**
+** REG_REG (reg, op, data) reg = reg op data
+** << 0 >>
+**
+**-----------------------------------------------------------
+** On 810A, 860, 825A, 875, 895 and 896 chips the content
+** of SFBR register can be used as data (SCR_SFBR_DATA).
+** The 896 has additionnal IO registers starting at
+** offset 0x80. Bit 7 of register offset is stored in
+** bit 7 of the SCRIPTS instruction first DWORD.
+**-----------------------------------------------------------
+*/
+
+#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80))
+
+#define SCR_SFBR_REG(reg,op,data) \
+ (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+#define SCR_REG_SFBR(reg,op,data) \
+ (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+#define SCR_REG_REG(reg,op,data) \
+ (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
+
+
+#define SCR_LOAD 0x00000000
+#define SCR_SHL 0x01000000
+#define SCR_OR 0x02000000
+#define SCR_XOR 0x03000000
+#define SCR_AND 0x04000000
+#define SCR_SHR 0x05000000
+#define SCR_ADD 0x06000000
+#define SCR_ADDC 0x07000000
+
+#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */
+
+/*-----------------------------------------------------------
+**
+** FROM_REG (reg) SFBR = reg
+** << 0 >>
+**
+** TO_REG (reg) reg = SFBR
+** << 0 >>
+**
+** LOAD_REG (reg, data) reg = <data>
+** << 0 >>
+**
+** LOAD_SFBR(data) SFBR = <data>
+** << 0 >>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_FROM_REG(reg) \
+ SCR_REG_SFBR(reg,SCR_OR,0)
+
+#define SCR_TO_REG(reg) \
+ SCR_SFBR_REG(reg,SCR_OR,0)
+
+#define SCR_LOAD_REG(reg,data) \
+ SCR_REG_REG(reg,SCR_LOAD,data)
+
+#define SCR_LOAD_SFBR(data) \
+ (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
+
+/*-----------------------------------------------------------
+**
+** LOAD from memory to register.
+** STORE from register to memory.
+**
+** Only supported by 810A, 860, 825A, 875, 895 and 896.
+**
+**-----------------------------------------------------------
+**
+** LOAD_ABS (LEN)
+** <<start address>>
+**
+** LOAD_REL (LEN) (DSA relative)
+** <<dsa_offset>>
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
+#define SCR_NO_FLUSH2 0x02000000
+#define SCR_DSA_REL2 0x10000000
+
+#define SCR_LOAD_R(reg, how, n) \
+ (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
+
+#define SCR_STORE_R(reg, how, n) \
+ (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
+
+#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
+#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
+#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n)
+#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n)
+
+#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
+#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
+#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
+#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
+
+
+/*-----------------------------------------------------------
+**
+** Waiting for Disconnect or Reselect
+**
+**-----------------------------------------------------------
+**
+** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
+** <<address>>
+**
+** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
+** <<distance>>
+**
+** CALL [ | IFTRUE/IFFALSE ( ... ) ]
+** <<address>>
+**
+** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
+** <<distance>>
+**
+** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
+** <<dummy>>
+**
+** INT [ | IFTRUE/IFFALSE ( ... ) ]
+** <<ident>>
+**
+** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
+** <<ident>>
+**
+** Conditions:
+** WHEN (phase)
+** IF (phase)
+** CARRYSET
+** DATA (data, mask)
+**
+**-----------------------------------------------------------
+*/
+
+#define SCR_NO_OP 0x80000000
+#define SCR_JUMP 0x80080000
+#define SCR_JUMP64 0x80480000
+#define SCR_JUMPR 0x80880000
+#define SCR_CALL 0x88080000
+#define SCR_CALLR 0x88880000
+#define SCR_RETURN 0x90080000
+#define SCR_INT 0x98080000
+#define SCR_INT_FLY 0x98180000
+
+#define IFFALSE(arg) (0x00080000 | (arg))
+#define IFTRUE(arg) (0x00000000 | (arg))
+
+#define WHEN(phase) (0x00030000 | (phase))
+#define IF(phase) (0x00020000 | (phase))
+
+#define DATA(D) (0x00040000 | ((D) & 0xff))
+#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
+
+#define CARRYSET (0x00200000)
+
+/*-----------------------------------------------------------
+**
+** SCSI constants.
+**
+**-----------------------------------------------------------
+*/
+
+/*
+** Messages
+*/
+
+#define M_COMPLETE COMMAND_COMPLETE
+#define M_EXTENDED EXTENDED_MESSAGE
+#define M_SAVE_DP SAVE_POINTERS
+#define M_RESTORE_DP RESTORE_POINTERS
+#define M_DISCONNECT DISCONNECT
+#define M_ID_ERROR INITIATOR_ERROR
+#define M_ABORT ABORT_TASK_SET
+#define M_REJECT MESSAGE_REJECT
+#define M_NOOP NOP
+#define M_PARITY MSG_PARITY_ERROR
+#define M_LCOMPLETE LINKED_CMD_COMPLETE
+#define M_FCOMPLETE LINKED_FLG_CMD_COMPLETE
+#define M_RESET TARGET_RESET
+#define M_ABORT_TAG ABORT_TASK
+#define M_CLEAR_QUEUE CLEAR_TASK_SET
+#define M_INIT_REC INITIATE_RECOVERY
+#define M_REL_REC RELEASE_RECOVERY
+#define M_TERMINATE (0x11)
+#define M_SIMPLE_TAG SIMPLE_QUEUE_TAG
+#define M_HEAD_TAG HEAD_OF_QUEUE_TAG
+#define M_ORDERED_TAG ORDERED_QUEUE_TAG
+#define M_IGN_RESIDUE IGNORE_WIDE_RESIDUE
+#define M_IDENTIFY (0x80)
+
+#define M_X_MODIFY_DP EXTENDED_MODIFY_DATA_POINTER
+#define M_X_SYNC_REQ EXTENDED_SDTR
+#define M_X_WIDE_REQ EXTENDED_WDTR
+#define M_X_PPR_REQ EXTENDED_PPR
+
+/*
+** Status
+*/
+
+#define S_GOOD (0x00)
+#define S_CHECK_COND (0x02)
+#define S_COND_MET (0x04)
+#define S_BUSY (0x08)
+#define S_INT (0x10)
+#define S_INT_COND_MET (0x14)
+#define S_CONFLICT (0x18)
+#define S_TERMINATED (0x20)
+#define S_QUEUE_FULL (0x28)
+#define S_ILLEGAL (0xff)
+#define S_SENSE (0x80)
+
+/*
+ * End of ncrreg from FreeBSD
+ */
/*
Build a scatter/gather entry.
diff --git a/drivers/scsi/sym53c8xx_comm.h b/drivers/scsi/sym53c8xx_comm.h
deleted file mode 100644
index 20ae2b17df5..00000000000
--- a/drivers/scsi/sym53c8xx_comm.h
+++ /dev/null
@@ -1,792 +0,0 @@
-/******************************************************************************
-** High Performance device driver for the Symbios 53C896 controller.
-**
-** Copyright (C) 1998-2001 Gerard Roudier <groudier@free.fr>
-**
-** This driver also supports all the Symbios 53C8XX controller family,
-** except 53C810 revisions < 16, 53C825 revisions < 16 and all
-** revisions of 53C815 controllers.
-**
-** This driver is based on the Linux port of the FreeBSD ncr driver.
-**
-** Copyright (C) 1994 Wolfgang Stanglmeier
-**
-**-----------------------------------------------------------------------------
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** This program is distributed in the hope that it will be useful,
-** but WITHOUT ANY WARRANTY; without even the implied warranty of
-** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-** GNU General Public License for more details.
-**
-** You should have received a copy of the GNU General Public License
-** along with this program; if not, write to the Free Software
-** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-**-----------------------------------------------------------------------------
-**
-** The Linux port of the FreeBSD ncr driver has been achieved in
-** november 1995 by:
-**
-** Gerard Roudier <groudier@free.fr>
-**
-** Being given that this driver originates from the FreeBSD version, and
-** in order to keep synergy on both, any suggested enhancements and corrections
-** received on Linux are automatically a potential candidate for the FreeBSD
-** version.
-**
-** The original driver has been written for 386bsd and FreeBSD by
-** Wolfgang Stanglmeier <wolf@cologne.de>
-** Stefan Esser <se@mi.Uni-Koeln.de>
-**
-**-----------------------------------------------------------------------------
-**
-** Major contributions:
-** --------------------
-**
-** NVRAM detection and reading.
-** Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
-**
-*******************************************************************************
-*/
-
-/*==========================================================
-**
-** Debugging tags
-**
-**==========================================================
-*/
-
-#define DEBUG_ALLOC (0x0001)
-#define DEBUG_PHASE (0x0002)
-#define DEBUG_QUEUE (0x0008)
-#define DEBUG_RESULT (0x0010)
-#define DEBUG_POINTER (0x0020)
-#define DEBUG_SCRIPT (0x0040)
-#define DEBUG_TINY (0x0080)
-#define DEBUG_TIMING (0x0100)
-#define DEBUG_NEGO (0x0200)
-#define DEBUG_TAGS (0x0400)
-#define DEBUG_SCATTER (0x0800)
-#define DEBUG_IC (0x1000)
-
-/*
-** Enable/Disable debug messages.
-** Can be changed at runtime too.
-*/
-
-#ifdef SCSI_NCR_DEBUG_INFO_SUPPORT
-static int ncr_debug = SCSI_NCR_DEBUG_FLAGS;
- #define DEBUG_FLAGS ncr_debug
-#else
- #define DEBUG_FLAGS SCSI_NCR_DEBUG_FLAGS
-#endif
-
-static inline struct list_head *ncr_list_pop(struct list_head *head)
-{
- if (!list_empty(head)) {
- struct list_head *elem = head->next;
-
- list_del(elem);
- return elem;
- }
-
- return NULL;
-}
-
-#ifdef __sparc__
-#include <asm/irq.h>
-#endif
-
-/*==========================================================
-**
-** Simple power of two buddy-like allocator.
-**
-** This simple code is not intended to be fast, but to
-** provide power of 2 aligned memory allocations.
-** Since the SCRIPTS processor only supplies 8 bit
-** arithmetic, this allocator allows simple and fast
-** address calculations from the SCRIPTS code.
-** In addition, cache line alignment is guaranteed for
-** power of 2 cache line size.
-** Enhanced in linux-2.3.44 to provide a memory pool
-** per pcidev to support dynamic dma mapping. (I would
-** have preferred a real bus astraction, btw).
-**
-**==========================================================
-*/
-
-#define MEMO_SHIFT 4 /* 16 bytes minimum memory chunk */
-#if PAGE_SIZE >= 8192
-#define MEMO_PAGE_ORDER 0 /* 1 PAGE maximum */
-#else
-#define MEMO_PAGE_ORDER 1 /* 2 PAGES maximum */
-#endif
-#define MEMO_FREE_UNUSED /* Free unused pages immediately */
-#define MEMO_WARN 1
-#define MEMO_GFP_FLAGS GFP_ATOMIC
-#define MEMO_CLUSTER_SHIFT (PAGE_SHIFT+MEMO_PAGE_ORDER)
-#define MEMO_CLUSTER_SIZE (1UL << MEMO_CLUSTER_SHIFT)
-#define MEMO_CLUSTER_MASK (MEMO_CLUSTER_SIZE-1)
-
-typedef u_long m_addr_t; /* Enough bits to bit-hack addresses */
-typedef struct device *m_bush_t; /* Something that addresses DMAable */
-
-typedef struct m_link { /* Link between free memory chunks */
- struct m_link *next;
-} m_link_s;
-
-typedef struct m_vtob { /* Virtual to Bus address translation */
- struct m_vtob *next;
- m_addr_t vaddr;
- m_addr_t baddr;
-} m_vtob_s;
-#define VTOB_HASH_SHIFT 5
-#define VTOB_HASH_SIZE (1UL << VTOB_HASH_SHIFT)
-#define VTOB_HASH_MASK (VTOB_HASH_SIZE-1)
-#define VTOB_HASH_CODE(m) \
- ((((m_addr_t) (m)) >> MEMO_CLUSTER_SHIFT) & VTOB_HASH_MASK)
-
-typedef struct m_pool { /* Memory pool of a given kind */
- m_bush_t bush;
- m_addr_t (*getp)(struct m_pool *);
- void (*freep)(struct m_pool *, m_addr_t);
- int nump;
- m_vtob_s *(vtob[VTOB_HASH_SIZE]);
- struct m_pool *next;
- struct m_link h[PAGE_SHIFT-MEMO_SHIFT+MEMO_PAGE_ORDER+1];
-} m_pool_s;
-
-static void *___m_alloc(m_pool_s *mp, int size)
-{
- int i = 0;
- int s = (1 << MEMO_SHIFT);
- int j;
- m_addr_t a;
- m_link_s *h = mp->h;
-
- if (size > (PAGE_SIZE << MEMO_PAGE_ORDER))
- return NULL;
-
- while (size > s) {
- s <<= 1;
- ++i;
- }
-
- j = i;
- while (!h[j].next) {
- if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) {
- h[j].next = (m_link_s *)mp->getp(mp);
- if (h[j].next)
- h[j].next->next = NULL;
- break;
- }
- ++j;
- s <<= 1;
- }
- a = (m_addr_t) h[j].next;
- if (a) {
- h[j].next = h[j].next->next;
- while (j > i) {
- j -= 1;
- s >>= 1;
- h[j].next = (m_link_s *) (a+s);
- h[j].next->next = NULL;
- }
- }
-#ifdef DEBUG
- printk("___m_alloc(%d) = %p\n", size, (void *) a);
-#endif
- return (void *) a;
-}
-
-static void ___m_free(m_pool_s *mp, void *ptr, int size)
-{
- int i = 0;
- int s = (1 << MEMO_SHIFT);
- m_link_s *q;
- m_addr_t a, b;
- m_link_s *h = mp->h;
-
-#ifdef DEBUG
- printk("___m_free(%p, %d)\n", ptr, size);
-#endif
-
- if (size > (PAGE_SIZE << MEMO_PAGE_ORDER))
- return;
-
- while (size > s) {
- s <<= 1;
- ++i;
- }
-
- a = (m_addr_t) ptr;
-
- while (1) {
-#ifdef MEMO_FREE_UNUSED
- if (s == (PAGE_SIZE << MEMO_PAGE_ORDER)) {
- mp->freep(mp, a);
- break;
- }
-#endif
- b = a ^ s;
- q = &h[i];
- while (q->next && q->next != (m_link_s *) b) {
- q = q->next;
- }
- if (!q->next) {
- ((m_link_s *) a)->next = h[i].next;
- h[i].next = (m_link_s *) a;
- break;
- }
- q->next = q->next->next;
- a = a & b;
- s <<= 1;
- ++i;
- }
-}
-
-static DEFINE_SPINLOCK(ncr53c8xx_lock);
-
-static void *__m_calloc2(m_pool_s *mp, int size, char *name, int uflags)
-{
- void *p;
-
- p = ___m_alloc(mp, size);
-
- if (DEBUG_FLAGS & DEBUG_ALLOC)
- printk ("new %-10s[%4d] @%p.\n", name, size, p);
-
- if (p)
- memset(p, 0, size);
- else if (uflags & MEMO_WARN)
- printk (NAME53C8XX ": failed to allocate %s[%d]\n", name, size);
-
- return p;
-}
-
-#define __m_calloc(mp, s, n) __m_calloc2(mp, s, n, MEMO_WARN)
-
-static void __m_free(m_pool_s *mp, void *ptr, int size, char *name)
-{
- if (DEBUG_FLAGS & DEBUG_ALLOC)
- printk ("freeing %-10s[%4d] @%p.\n", name, size, ptr);
-
- ___m_free(mp, ptr, size);
-
-}
-
-/*
- * With pci bus iommu support, we use a default pool of unmapped memory
- * for memory we donnot need to DMA from/to and one pool per pcidev for
- * memory accessed by the PCI chip. `mp0' is the default not DMAable pool.
- */
-
-static m_addr_t ___mp0_getp(m_pool_s *mp)
-{
- m_addr_t m = __get_free_pages(MEMO_GFP_FLAGS, MEMO_PAGE_ORDER);
- if (m)
- ++mp->nump;
- return m;
-}
-
-static void ___mp0_freep(m_pool_s *mp, m_addr_t m)
-{
- free_pages(m, MEMO_PAGE_ORDER);
- --mp->nump;
-}
-
-static m_pool_s mp0 = {NULL, ___mp0_getp, ___mp0_freep};
-
-/*
- * DMAable pools.
- */
-
-/*
- * With pci bus iommu support, we maintain one pool per pcidev and a
- * hashed reverse table for virtual to bus physical address translations.
- */
-static m_addr_t ___dma_getp(m_pool_s *mp)
-{
- m_addr_t vp;
- m_vtob_s *vbp;
-
- vbp = __m_calloc(&mp0, sizeof(*vbp), "VTOB");
- if (vbp) {
- dma_addr_t daddr;
- vp = (m_addr_t) dma_alloc_coherent(mp->bush,
- PAGE_SIZE<<MEMO_PAGE_ORDER,
- &daddr, GFP_ATOMIC);
- if (vp) {
- int hc = VTOB_HASH_CODE(vp);
- vbp->vaddr = vp;
- vbp->baddr = daddr;
- vbp->next = mp->vtob[hc];
- mp->vtob[hc] = vbp;
- ++mp->nump;
- return vp;
- }
- }
- if (vbp)
- __m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
- return 0;
-}
-
-static void ___dma_freep(m_pool_s *mp, m_addr_t m)
-{
- m_vtob_s **vbpp, *vbp;
- int hc = VTOB_HASH_CODE(m);
-
- vbpp = &mp->vtob[hc];
- while (*vbpp && (*vbpp)->vaddr != m)
- vbpp = &(*vbpp)->next;
- if (*vbpp) {
- vbp = *vbpp;
- *vbpp = (*vbpp)->next;
- dma_free_coherent(mp->bush, PAGE_SIZE<<MEMO_PAGE_ORDER,
- (void *)vbp->vaddr, (dma_addr_t)vbp->baddr);
- __m_free(&mp0, vbp, sizeof(*vbp), "VTOB");
- --mp->nump;
- }
-}
-
-static inline m_pool_s *___get_dma_pool(m_bush_t bush)
-{
- m_pool_s *mp;
- for (mp = mp0.next; mp && mp->bush != bush; mp = mp->next);
- return mp;
-}
-
-static m_pool_s *___cre_dma_pool(m_bush_t bush)
-{
- m_pool_s *mp;
- mp = __m_calloc(&mp0, sizeof(*mp), "MPOOL");
- if (mp) {
- memset(mp, 0, sizeof(*mp));
- mp->bush = bush;
- mp->getp = ___dma_getp;
- mp->freep = ___dma_freep;
- mp->next = mp0.next;
- mp0.next = mp;
- }
- return mp;
-}
-
-static void ___del_dma_pool(m_pool_s *p)
-{
- struct m_pool **pp = &mp0.next;
-
- while (*pp && *pp != p)
- pp = &(*pp)->next;
- if (*pp) {
- *pp = (*pp)->next;
- __m_free(&mp0, p, sizeof(*p), "MPOOL");
- }
-}
-
-static void *__m_calloc_dma(m_bush_t bush, int size, char *name)
-{
- u_long flags;
- struct m_pool *mp;
- void *m = NULL;
-
- spin_lock_irqsave(&ncr53c8xx_lock, flags);
- mp = ___get_dma_pool(bush);
- if (!mp)
- mp = ___cre_dma_pool(bush);
- if (mp)
- m = __m_calloc(mp, size, name);
- if (mp && !mp->nump)
- ___del_dma_pool(mp);
- spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
-
- return m;
-}
-
-static void __m_free_dma(m_bush_t bush, void *m, int size, char *name)
-{
- u_long flags;
- struct m_pool *mp;
-
- spin_lock_irqsave(&ncr53c8xx_lock, flags);
- mp = ___get_dma_pool(bush);
- if (mp)
- __m_free(mp, m, size, name);
- if (mp && !mp->nump)
- ___del_dma_pool(mp);
- spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
-}
-
-static m_addr_t __vtobus(m_bush_t bush, void *m)
-{
- u_long flags;
- m_pool_s *mp;
- int hc = VTOB_HASH_CODE(m);
- m_vtob_s *vp = NULL;
- m_addr_t a = ((m_addr_t) m) & ~MEMO_CLUSTER_MASK;
-
- spin_lock_irqsave(&ncr53c8xx_lock, flags);
- mp = ___get_dma_pool(bush);
- if (mp) {
- vp = mp->vtob[hc];
- while (vp && (m_addr_t) vp->vaddr != a)
- vp = vp->next;
- }
- spin_unlock_irqrestore(&ncr53c8xx_lock, flags);
- return vp ? vp->baddr + (((m_addr_t) m) - a) : 0;
-}
-
-#define _m_calloc_dma(np, s, n) __m_calloc_dma(np->dev, s, n)
-#define _m_free_dma(np, p, s, n) __m_free_dma(np->dev, p, s, n)
-#define m_calloc_dma(s, n) _m_calloc_dma(np, s, n)
-#define m_free_dma(p, s, n) _m_free_dma(np, p, s, n)
-#define _vtobus(np, p) __vtobus(np->dev, p)
-#define vtobus(p) _vtobus(np, p)
-
-/*
- * Deal with DMA mapping/unmapping.
- */
-
-/* To keep track of the dma mapping (sg/single) that has been set */
-#define __data_mapped SCp.phase
-#define __data_mapping SCp.have_data_in
-
-static void __unmap_scsi_data(struct device *dev, struct scsi_cmnd *cmd)
-{
- switch(cmd->__data_mapped) {
- case 2:
- dma_unmap_sg(dev, cmd->buffer, cmd->use_sg,
- cmd->sc_data_direction);
- break;
- case 1:
- dma_unmap_single(dev, cmd->__data_mapping,
- cmd->request_bufflen,
- cmd->sc_data_direction);
- break;
- }
- cmd->__data_mapped = 0;
-}
-
-static u_long __map_scsi_single_data(struct device *dev, struct scsi_cmnd *cmd)
-{
- dma_addr_t mapping;
-
- if (cmd->request_bufflen == 0)
- return 0;
-
- mapping = dma_map_single(dev, cmd->request_buffer,
- cmd->request_bufflen,
- cmd->sc_data_direction);
- cmd->__data_mapped = 1;
- cmd->__data_mapping = mapping;
-
- return mapping;
-}
-
-static int __map_scsi_sg_data(struct device *dev, struct scsi_cmnd *cmd)
-{
- int use_sg;
-
- if (cmd->use_sg == 0)
- return 0;
-
- use_sg = dma_map_sg(dev, cmd->buffer, cmd->use_sg,
- cmd->sc_data_direction);
- cmd->__data_mapped = 2;
- cmd->__data_mapping = use_sg;
-
- return use_sg;
-}
-
-#define unmap_scsi_data(np, cmd) __unmap_scsi_data(np->dev, cmd)
-#define map_scsi_single_data(np, cmd) __map_scsi_single_data(np->dev, cmd)
-#define map_scsi_sg_data(np, cmd) __map_scsi_sg_data(np->dev, cmd)
-
-/*==========================================================
-**
-** Driver setup.
-**
-** This structure is initialized from linux config
-** options. It can be overridden at boot-up by the boot
-** command line.
-**
-**==========================================================
-*/
-static struct ncr_driver_setup
- driver_setup = SCSI_NCR_DRIVER_SETUP;
-
-#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
-static struct ncr_driver_setup
- driver_safe_setup __initdata = SCSI_NCR_DRIVER_SAFE_SETUP;
-#endif
-
-#define initverbose (driver_setup.verbose)
-#define bootverbose (np->verbose)
-
-
-/*===================================================================
-**
-** Driver setup from the boot command line
-**
-**===================================================================
-*/
-
-#ifdef MODULE
-#define ARG_SEP ' '
-#else
-#define ARG_SEP ','
-#endif
-
-#define OPT_TAGS 1
-#define OPT_MASTER_PARITY 2
-#define OPT_SCSI_PARITY 3
-#define OPT_DISCONNECTION 4
-#define OPT_SPECIAL_FEATURES 5
-#define OPT_UNUSED_1 6
-#define OPT_FORCE_SYNC_NEGO 7
-#define OPT_REVERSE_PROBE 8
-#define OPT_DEFAULT_SYNC 9
-#define OPT_VERBOSE 10
-#define OPT_DEBUG 11
-#define OPT_BURST_MAX 12
-#define OPT_LED_PIN 13
-#define OPT_MAX_WIDE 14
-#define OPT_SETTLE_DELAY 15
-#define OPT_DIFF_SUPPORT 16
-#define OPT_IRQM 17
-#define OPT_PCI_FIX_UP 18
-#define OPT_BUS_CHECK 19
-#define OPT_OPTIMIZE 20
-#define OPT_RECOVERY 21
-#define OPT_SAFE_SETUP 22
-#define OPT_USE_NVRAM 23
-#define OPT_EXCLUDE 24
-#define OPT_HOST_ID 25
-
-#ifdef SCSI_NCR_IARB_SUPPORT
-#define OPT_IARB 26
-#endif
-
-static char setup_token[] __initdata =
- "tags:" "mpar:"
- "spar:" "disc:"
- "specf:" "ultra:"
- "fsn:" "revprob:"
- "sync:" "verb:"
- "debug:" "burst:"
- "led:" "wide:"
- "settle:" "diff:"
- "irqm:" "pcifix:"
- "buschk:" "optim:"
- "recovery:"
- "safe:" "nvram:"
- "excl:" "hostid:"
-#ifdef SCSI_NCR_IARB_SUPPORT
- "iarb:"
-#endif
- ; /* DONNOT REMOVE THIS ';' */
-
-#ifdef MODULE
-#define ARG_SEP ' '
-#else
-#define ARG_SEP ','
-#endif
-
-static int __init get_setup_token(char *p)
-{
- char *cur = setup_token;
- char *pc;
- int i = 0;
-
- while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
- ++pc;
- ++i;
- if (!strncmp(p, cur, pc - cur))
- return i;
- cur = pc;
- }
- return 0;
-}
-
-
-static int __init sym53c8xx__setup(char *str)
-{
-#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
- char *cur = str;
- char *pc, *pv;
- int i, val, c;
- int xi = 0;
-
- while (cur != NULL && (pc = strchr(cur, ':')) != NULL) {
- char *pe;
-
- val = 0;
- pv = pc;
- c = *++pv;
-
- if (c == 'n')
- val = 0;
- else if (c == 'y')
- val = 1;
- else
- val = (int) simple_strtoul(pv, &pe, 0);
-
- switch (get_setup_token(cur)) {
- case OPT_TAGS:
- driver_setup.default_tags = val;
- if (pe && *pe == '/') {
- i = 0;
- while (*pe && *pe != ARG_SEP &&
- i < sizeof(driver_setup.tag_ctrl)-1) {
- driver_setup.tag_ctrl[i++] = *pe++;
- }
- driver_setup.tag_ctrl[i] = '\0';
- }
- break;
- case OPT_MASTER_PARITY:
- driver_setup.master_parity = val;
- break;
- case OPT_SCSI_PARITY:
- driver_setup.scsi_parity = val;
- break;
- case OPT_DISCONNECTION:
- driver_setup.disconnection = val;
- break;
- case OPT_SPECIAL_FEATURES:
- driver_setup.special_features = val;
- break;
- case OPT_FORCE_SYNC_NEGO:
- driver_setup.force_sync_nego = val;
- break;
- case OPT_REVERSE_PROBE:
- driver_setup.reverse_probe = val;
- break;
- case OPT_DEFAULT_SYNC:
- driver_setup.default_sync = val;
- break;
- case OPT_VERBOSE:
- driver_setup.verbose = val;
- break;
- case OPT_DEBUG:
- driver_setup.debug = val;
- break;
- case OPT_BURST_MAX:
- driver_setup.burst_max = val;
- break;
- case OPT_LED_PIN:
- driver_setup.led_pin = val;
- break;
- case OPT_MAX_WIDE:
- driver_setup.max_wide = val? 1:0;
- break;
- case OPT_SETTLE_DELAY:
- driver_setup.settle_delay = val;
- break;
- case OPT_DIFF_SUPPORT:
- driver_setup.diff_support = val;
- break;
- case OPT_IRQM:
- driver_setup.irqm = val;
- break;
- case OPT_PCI_FIX_UP:
- driver_setup.pci_fix_up = val;
- break;
- case OPT_BUS_CHECK:
- driver_setup.bus_check = val;
- break;
- case OPT_OPTIMIZE:
- driver_setup.optimize = val;
- break;
- case OPT_RECOVERY:
- driver_setup.recovery = val;
- break;
- case OPT_USE_NVRAM:
- driver_setup.use_nvram = val;
- break;
- case OPT_SAFE_SETUP:
- memcpy(&driver_setup, &driver_safe_setup,
- sizeof(driver_setup));
- break;
- case OPT_EXCLUDE:
- if (xi < SCSI_NCR_MAX_EXCLUDES)
- driver_setup.excludes[xi++] = val;
- break;
- case OPT_HOST_ID:
- driver_setup.host_id = val;
- break;
-#ifdef SCSI_NCR_IARB_SUPPORT
- case OPT_IARB:
- driver_setup.iarb = val;
- break;
-#endif
- default:
- printk("sym53c8xx_setup: unexpected boot option '%.*s' ignored\n", (int)(pc-cur+1), cur);
- break;
- }
-
- if ((cur = strchr(cur, ARG_SEP)) != NULL)
- ++cur;
- }
-#endif /* SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT */
- return 1;
-}
-
-/*===================================================================
-**
-** Get device queue depth from boot command line.
-**
-**===================================================================
-*/
-#define DEF_DEPTH (driver_setup.default_tags)
-#define ALL_TARGETS -2
-#define NO_TARGET -1
-#define ALL_LUNS -2
-#define NO_LUN -1
-
-static int device_queue_depth(int unit, int target, int lun)
-{
- int c, h, t, u, v;
- char *p = driver_setup.tag_ctrl;
- char *ep;
-
- h = -1;
- t = NO_TARGET;
- u = NO_LUN;
- while ((c = *p++) != 0) {
- v = simple_strtoul(p, &ep, 0);
- switch(c) {
- case '/':
- ++h;
- t = ALL_TARGETS;
- u = ALL_LUNS;
- break;
- case 't':
- if (t != target)
- t = (target == v) ? v : NO_TARGET;
- u = ALL_LUNS;
- break;
- case 'u':
- if (u != lun)
- u = (lun == v) ? v : NO_LUN;
- break;
- case 'q':
- if (h == unit &&
- (t == ALL_TARGETS || t == target) &&
- (u == ALL_LUNS || u == lun))
- return v;
- break;
- case '-':
- t = ALL_TARGETS;
- u = ALL_LUNS;
- break;
- default:
- break;
- }
- p = ep;
- }
- return DEF_DEPTH;
-}
diff --git a/drivers/scsi/sym53c8xx_defs.h b/drivers/scsi/sym53c8xx_defs.h
deleted file mode 100644
index 139cd0e12e6..00000000000
--- a/drivers/scsi/sym53c8xx_defs.h
+++ /dev/null
@@ -1,1320 +0,0 @@
-/******************************************************************************
-** High Performance device driver for the Symbios 53C896 controller.
-**
-** Copyright (C) 1998-2001 Gerard Roudier <groudier@free.fr>
-**
-** This driver also supports all the Symbios 53C8XX controller family,
-** except 53C810 revisions < 16, 53C825 revisions < 16 and all
-** revisions of 53C815 controllers.
-**
-** This driver is based on the Linux port of the FreeBSD ncr driver.
-**
-** Copyright (C) 1994 Wolfgang Stanglmeier
-**
-**-----------------------------------------------------------------------------
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** This program is distributed in the hope that it will be useful,
-** but WITHOUT ANY WARRANTY; without even the implied warranty of
-** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-** GNU General Public License for more details.
-**
-** You should have received a copy of the GNU General Public License
-** along with this program; if not, write to the Free Software
-** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-**-----------------------------------------------------------------------------
-**
-** The Linux port of the FreeBSD ncr driver has been achieved in
-** november 1995 by:
-**
-** Gerard Roudier <groudier@free.fr>
-**
-** Being given that this driver originates from the FreeBSD version, and
-** in order to keep synergy on both, any suggested enhancements and corrections
-** received on Linux are automatically a potential candidate for the FreeBSD
-** version.
-**
-** The original driver has been written for 386bsd and FreeBSD by
-** Wolfgang Stanglmeier <wolf@cologne.de>
-** Stefan Esser <se@mi.Uni-Koeln.de>
-**
-**-----------------------------------------------------------------------------
-**
-** Major contributions:
-** --------------------
-**
-** NVRAM detection and reading.
-** Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
-**
-** Added support for MIPS big endian systems.
-** Carsten Langgaard, carstenl@mips.com
-** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
-**
-** Added support for HP PARISC big endian systems.
-** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
-**
-*******************************************************************************
-*/
-
-#ifndef SYM53C8XX_DEFS_H
-#define SYM53C8XX_DEFS_H
-
-#include <linux/config.h>
-
-/*
-** If you want a driver as small as possible, donnot define the
-** following options.
-*/
-#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
-#define SCSI_NCR_DEBUG_INFO_SUPPORT
-
-/*
-** To disable integrity checking, do not define the
-** following option.
-*/
-#ifdef CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK
-# define SCSI_NCR_ENABLE_INTEGRITY_CHECK
-#endif
-
-/* ---------------------------------------------------------------------
-** Take into account kernel configured parameters.
-** Most of these options can be overridden at startup by a command line.
-** ---------------------------------------------------------------------
-*/
-
-/*
- * For Ultra2 and Ultra3 SCSI support option, use special features.
- *
- * Value (default) means:
- * bit 0 : all features enabled, except:
- * bit 1 : PCI Write And Invalidate.
- * bit 2 : Data Phase Mismatch handling from SCRIPTS.
- *
- * Use boot options ncr53c8xx=specf:1 if you want all chip features to be
- * enabled by the driver.
- */
-#define SCSI_NCR_SETUP_SPECIAL_FEATURES (3)
-
-#define SCSI_NCR_MAX_SYNC (80)
-
-/*
- * Allow tags from 2 to 256, default 8
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_MAX_TAGS
-#if CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2
-#define SCSI_NCR_MAX_TAGS (2)
-#elif CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256
-#define SCSI_NCR_MAX_TAGS (256)
-#else
-#define SCSI_NCR_MAX_TAGS CONFIG_SCSI_NCR53C8XX_MAX_TAGS
-#endif
-#else
-#define SCSI_NCR_MAX_TAGS (8)
-#endif
-
-/*
- * Allow tagged command queuing support if configured with default number
- * of tags set to max (see above).
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
-#define SCSI_NCR_SETUP_DEFAULT_TAGS CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
-#elif defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE
-#define SCSI_NCR_SETUP_DEFAULT_TAGS SCSI_NCR_MAX_TAGS
-#else
-#define SCSI_NCR_SETUP_DEFAULT_TAGS (0)
-#endif
-
-/*
- * Immediate arbitration
- */
-#if defined(CONFIG_SCSI_NCR53C8XX_IARB)
-#define SCSI_NCR_IARB_SUPPORT
-#endif
-
-/*
- * Sync transfer frequency at startup.
- * Allow from 5Mhz to 80Mhz default 20 Mhz.
- */
-#ifndef CONFIG_SCSI_NCR53C8XX_SYNC
-#define CONFIG_SCSI_NCR53C8XX_SYNC (20)
-#elif CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC
-#undef CONFIG_SCSI_NCR53C8XX_SYNC
-#define CONFIG_SCSI_NCR53C8XX_SYNC SCSI_NCR_MAX_SYNC
-#endif
-
-#if CONFIG_SCSI_NCR53C8XX_SYNC == 0
-#define SCSI_NCR_SETUP_DEFAULT_SYNC (255)
-#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 5
-#define SCSI_NCR_SETUP_DEFAULT_SYNC (50)
-#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 20
-#define SCSI_NCR_SETUP_DEFAULT_SYNC (250/(CONFIG_SCSI_NCR53C8XX_SYNC))
-#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 33
-#define SCSI_NCR_SETUP_DEFAULT_SYNC (11)
-#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 40
-#define SCSI_NCR_SETUP_DEFAULT_SYNC (10)
-#else
-#define SCSI_NCR_SETUP_DEFAULT_SYNC (9)
-#endif
-
-/*
- * Disallow disconnections at boot-up
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
-#define SCSI_NCR_SETUP_DISCONNECTION (0)
-#else
-#define SCSI_NCR_SETUP_DISCONNECTION (1)
-#endif
-
-/*
- * Force synchronous negotiation for all targets
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO
-#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (1)
-#else
-#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (0)
-#endif
-
-/*
- * Disable master parity checking (flawed hardwares need that)
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK
-#define SCSI_NCR_SETUP_MASTER_PARITY (0)
-#else
-#define SCSI_NCR_SETUP_MASTER_PARITY (1)
-#endif
-
-/*
- * Disable scsi parity checking (flawed devices may need that)
- */
-#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK
-#define SCSI_NCR_SETUP_SCSI_PARITY (0)
-#else
-#define SCSI_NCR_SETUP_SCSI_PARITY (1)
-#endif
-
-/*
- * Settle time after reset at boot-up
- */
-#define SCSI_NCR_SETUP_SETTLE_TIME (2)
-
-/*
-** Bridge quirks work-around option defaulted to 1.
-*/
-#ifndef SCSI_NCR_PCIQ_WORK_AROUND_OPT
-#define SCSI_NCR_PCIQ_WORK_AROUND_OPT 1
-#endif
-
-/*
-** Work-around common bridge misbehaviour.
-**
-** - Do not flush posted writes in the opposite
-** direction on read.
-** - May reorder DMA writes to memory.
-**
-** This option should not affect performances
-** significantly, so it is the default.
-*/
-#if SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1
-#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
-#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
-#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
-
-/*
-** Same as option 1, but also deal with
-** misconfigured interrupts.
-**
-** - Edge triggerred instead of level sensitive.
-** - No interrupt line connected.
-** - IRQ number misconfigured.
-**
-** If no interrupt is delivered, the driver will
-** catch the interrupt conditions 10 times per
-** second. No need to say that this option is
-** not recommended.
-*/
-#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2
-#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
-#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
-#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
-#define SCSI_NCR_PCIQ_BROKEN_INTR
-
-/*
-** Some bridge designers decided to flush
-** everything prior to deliver the interrupt.
-** This option tries to deal with such a
-** behaviour.
-*/
-#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3
-#define SCSI_NCR_PCIQ_SYNC_ON_INTR
-#endif
-
-/*
-** Other parameters not configurable with "make config"
-** Avoid to change these constants, unless you know what you are doing.
-*/
-
-#define SCSI_NCR_ALWAYS_SIMPLE_TAG
-#define SCSI_NCR_MAX_SCATTER (127)
-#define SCSI_NCR_MAX_TARGET (16)
-
-/*
-** Compute some desirable value for CAN_QUEUE
-** and CMD_PER_LUN.
-** The driver will use lower values if these
-** ones appear to be too large.
-*/
-#define SCSI_NCR_CAN_QUEUE (8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET)
-#define SCSI_NCR_CMD_PER_LUN (SCSI_NCR_MAX_TAGS)
-
-#define SCSI_NCR_SG_TABLESIZE (SCSI_NCR_MAX_SCATTER)
-#define SCSI_NCR_TIMER_INTERVAL (HZ)
-
-#if 1 /* defined CONFIG_SCSI_MULTI_LUN */
-#define SCSI_NCR_MAX_LUN (16)
-#else
-#define SCSI_NCR_MAX_LUN (1)
-#endif
-
-/*
- * IO functions definition for big/little endian CPU support.
- * For now, the NCR is only supported in little endian addressing mode,
- */
-
-#ifdef __BIG_ENDIAN
-
-#define inw_l2b inw
-#define inl_l2b inl
-#define outw_b2l outw
-#define outl_b2l outl
-
-#define readb_raw readb
-#define writeb_raw writeb
-
-#if defined(SCSI_NCR_BIG_ENDIAN)
-#define readw_l2b __raw_readw
-#define readl_l2b __raw_readl
-#define writew_b2l __raw_writew
-#define writel_b2l __raw_writel
-#define readw_raw __raw_readw
-#define readl_raw __raw_readl
-#define writew_raw __raw_writew
-#define writel_raw __raw_writel
-#else /* Other big-endian */
-#define readw_l2b readw
-#define readl_l2b readl
-#define writew_b2l writew
-#define writel_b2l writel
-#define readw_raw readw
-#define readl_raw readl
-#define writew_raw writew
-#define writel_raw writel
-#endif
-
-#else /* little endian */
-
-#define inw_raw inw
-#define inl_raw inl
-#define outw_raw outw
-#define outl_raw outl
-
-#define readb_raw readb
-#define readw_raw readw
-#define readl_raw readl
-#define writeb_raw writeb
-#define writew_raw writew
-#define writel_raw writel
-
-#endif
-
-#if !defined(__hppa__) && !defined(__mips__)
-#ifdef SCSI_NCR_BIG_ENDIAN
-#error "The NCR in BIG ENDIAN addressing mode is not (yet) supported"
-#endif
-#endif
-
-#define MEMORY_BARRIER() mb()
-
-
-/*
- * If the NCR uses big endian addressing mode over the
- * PCI, actual io register addresses for byte and word
- * accesses must be changed according to lane routing.
- * Btw, ncr_offb() and ncr_offw() macros only apply to
- * constants and so donnot generate bloated code.
- */
-
-#if defined(SCSI_NCR_BIG_ENDIAN)
-
-#define ncr_offb(o) (((o)&~3)+((~((o)&3))&3))
-#define ncr_offw(o) (((o)&~3)+((~((o)&3))&2))
-
-#else
-
-#define ncr_offb(o) (o)
-#define ncr_offw(o) (o)
-
-#endif
-
-/*
- * If the CPU and the NCR use same endian-ness addressing,
- * no byte reordering is needed for script patching.
- * Macro cpu_to_scr() is to be used for script patching.
- * Macro scr_to_cpu() is to be used for getting a DWORD
- * from the script.
- */
-
-#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
-
-#define cpu_to_scr(dw) cpu_to_le32(dw)
-#define scr_to_cpu(dw) le32_to_cpu(dw)
-
-#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
-
-#define cpu_to_scr(dw) cpu_to_be32(dw)
-#define scr_to_cpu(dw) be32_to_cpu(dw)
-
-#else
-
-#define cpu_to_scr(dw) (dw)
-#define scr_to_cpu(dw) (dw)
-
-#endif
-
-/*
- * Access to the controller chip.
- *
- * If the CPU and the NCR use same endian-ness addressing,
- * no byte reordering is needed for accessing chip io
- * registers. Functions suffixed by '_raw' are assumed
- * to access the chip over the PCI without doing byte
- * reordering. Functions suffixed by '_l2b' are
- * assumed to perform little-endian to big-endian byte
- * reordering, those suffixed by '_b2l' blah, blah,
- * blah, ...
- */
-
-/*
- * MEMORY mapped IO input / output
- */
-
-#define INB_OFF(o) readb_raw((char __iomem *)np->reg + ncr_offb(o))
-#define OUTB_OFF(o, val) writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o))
-
-#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
-
-#define INW_OFF(o) readw_l2b((char __iomem *)np->reg + ncr_offw(o))
-#define INL_OFF(o) readl_l2b((char __iomem *)np->reg + (o))
-
-#define OUTW_OFF(o, val) writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o))
-#define OUTL_OFF(o, val) writel_b2l((val), (char __iomem *)np->reg + (o))
-
-#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
-
-#define INW_OFF(o) readw_b2l((char __iomem *)np->reg + ncr_offw(o))
-#define INL_OFF(o) readl_b2l((char __iomem *)np->reg + (o))
-
-#define OUTW_OFF(o, val) writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o))
-#define OUTL_OFF(o, val) writel_l2b((val), (char __iomem *)np->reg + (o))
-
-#else
-
-#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
-/* Only 8 or 32 bit transfers allowed */
-#define INW_OFF(o) (readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1))
-#else
-#define INW_OFF(o) readw_raw((char __iomem *)np->reg + ncr_offw(o))
-#endif
-#define INL_OFF(o) readl_raw((char __iomem *)np->reg + (o))
-
-#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
-/* Only 8 or 32 bit transfers allowed */
-#define OUTW_OFF(o, val) do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0)
-#else
-#define OUTW_OFF(o, val) writew_raw((val), (char __iomem *)np->reg + ncr_offw(o))
-#endif
-#define OUTL_OFF(o, val) writel_raw((val), (char __iomem *)np->reg + (o))
-
-#endif
-
-#define INB(r) INB_OFF (offsetof(struct ncr_reg,r))
-#define INW(r) INW_OFF (offsetof(struct ncr_reg,r))
-#define INL(r) INL_OFF (offsetof(struct ncr_reg,r))
-
-#define OUTB(r, val) OUTB_OFF (offsetof(struct ncr_reg,r), (val))
-#define OUTW(r, val) OUTW_OFF (offsetof(struct ncr_reg,r), (val))
-#define OUTL(r, val) OUTL_OFF (offsetof(struct ncr_reg,r), (val))
-
-/*
- * Set bit field ON, OFF
- */
-
-#define OUTONB(r, m) OUTB(r, INB(r) | (m))
-#define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m))
-#define OUTONW(r, m) OUTW(r, INW(r) | (m))
-#define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m))
-#define OUTONL(r, m) OUTL(r, INL(r) | (m))
-#define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m))
-
-/*
- * We normally want the chip to have a consistent view
- * of driver internal data structures when we restart it.
- * Thus these macros.
- */
-#define OUTL_DSP(v) \
- do { \
- MEMORY_BARRIER(); \
- OUTL (nc_dsp, (v)); \
- } while (0)
-
-#define OUTONB_STD() \
- do { \
- MEMORY_BARRIER(); \
- OUTONB (nc_dcntl, (STD|NOCOM)); \
- } while (0)
-
-
-/*
-** NCR53C8XX devices features table.
-*/
-struct ncr_chip {
- unsigned short revision_id;
- unsigned char burst_max; /* log-base-2 of max burst */
- unsigned char offset_max;
- unsigned char nr_divisor;
- unsigned int features;
-#define FE_LED0 (1<<0)
-#define FE_WIDE (1<<1) /* Wide data transfers */
-#define FE_ULTRA (1<<2) /* Ultra speed 20Mtrans/sec */
-#define FE_DBLR (1<<4) /* Clock doubler present */
-#define FE_QUAD (1<<5) /* Clock quadrupler present */
-#define FE_ERL (1<<6) /* Enable read line */
-#define FE_CLSE (1<<7) /* Cache line size enable */
-#define FE_WRIE (1<<8) /* Write & Invalidate enable */
-#define FE_ERMP (1<<9) /* Enable read multiple */
-#define FE_BOF (1<<10) /* Burst opcode fetch */
-#define FE_DFS (1<<11) /* DMA fifo size */
-#define FE_PFEN (1<<12) /* Prefetch enable */
-#define FE_LDSTR (1<<13) /* Load/Store supported */
-#define FE_RAM (1<<14) /* On chip RAM present */
-#define FE_VARCLK (1<<15) /* SCSI clock may vary */
-#define FE_RAM8K (1<<16) /* On chip RAM sized 8Kb */
-#define FE_64BIT (1<<17) /* Have a 64-bit PCI interface */
-#define FE_IO256 (1<<18) /* Requires full 256 bytes in PCI space */
-#define FE_NOPM (1<<19) /* Scripts handles phase mismatch */
-#define FE_LEDC (1<<20) /* Hardware control of LED */
-#define FE_DIFF (1<<21) /* Support Differential SCSI */
-#define FE_66MHZ (1<<23) /* 66MHz PCI Support */
-#define FE_DAC (1<<24) /* Support DAC cycles (64 bit addressing) */
-#define FE_ISTAT1 (1<<25) /* Have ISTAT1, MBOX0, MBOX1 registers */
-#define FE_DAC_IN_USE (1<<26) /* Platform does DAC cycles */
-#define FE_EHP (1<<27) /* 720: Even host parity */
-#define FE_MUX (1<<28) /* 720: Multiplexed bus */
-#define FE_EA (1<<29) /* 720: Enable Ack */
-
-#define FE_CACHE_SET (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP)
-#define FE_SCSI_SET (FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80)
-#define FE_SPECIAL_SET (FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM)
-};
-
-
-/*
-** Driver setup structure.
-**
-** This structure is initialized from linux config options.
-** It can be overridden at boot-up by the boot command line.
-*/
-#define SCSI_NCR_MAX_EXCLUDES 8
-struct ncr_driver_setup {
- u8 master_parity;
- u8 scsi_parity;
- u8 disconnection;
- u8 special_features;
- u8 force_sync_nego;
- u8 reverse_probe;
- u8 pci_fix_up;
- u8 use_nvram;
- u8 verbose;
- u8 default_tags;
- u16 default_sync;
- u16 debug;
- u8 burst_max;
- u8 led_pin;
- u8 max_wide;
- u8 settle_delay;
- u8 diff_support;
- u8 irqm;
- u8 bus_check;
- u8 optimize;
- u8 recovery;
- u8 host_id;
- u16 iarb;
- u32 excludes[SCSI_NCR_MAX_EXCLUDES];
- char tag_ctrl[100];
-};
-
-/*
-** Initial setup.
-** Can be overriden at startup by a command line.
-*/
-#define SCSI_NCR_DRIVER_SETUP \
-{ \
- SCSI_NCR_SETUP_MASTER_PARITY, \
- SCSI_NCR_SETUP_SCSI_PARITY, \
- SCSI_NCR_SETUP_DISCONNECTION, \
- SCSI_NCR_SETUP_SPECIAL_FEATURES, \
- SCSI_NCR_SETUP_FORCE_SYNC_NEGO, \
- 0, \
- 0, \
- 1, \
- 0, \
- SCSI_NCR_SETUP_DEFAULT_TAGS, \
- SCSI_NCR_SETUP_DEFAULT_SYNC, \
- 0x00, \
- 7, \
- 0, \
- 1, \
- SCSI_NCR_SETUP_SETTLE_TIME, \
- 0, \
- 0, \
- 1, \
- 0, \
- 0, \
- 255, \
- 0x00 \
-}
-
-/*
-** Boot fail safe setup.
-** Override initial setup from boot command line:
-** ncr53c8xx=safe:y
-*/
-#define SCSI_NCR_DRIVER_SAFE_SETUP \
-{ \
- 0, \
- 1, \
- 0, \
- 0, \
- 0, \
- 0, \
- 0, \
- 1, \
- 2, \
- 0, \
- 255, \
- 0x00, \
- 255, \
- 0, \
- 0, \
- 10, \
- 1, \
- 1, \
- 1, \
- 0, \
- 0, \
- 255 \
-}
-
-/**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/
-
-/*-----------------------------------------------------------------
-**
-** The ncr 53c810 register structure.
-**
-**-----------------------------------------------------------------
-*/
-
-struct ncr_reg {
-/*00*/ u8 nc_scntl0; /* full arb., ena parity, par->ATN */
-
-/*01*/ u8 nc_scntl1; /* no reset */
- #define ISCON 0x10 /* connected to scsi */
- #define CRST 0x08 /* force reset */
- #define IARB 0x02 /* immediate arbitration */
-
-/*02*/ u8 nc_scntl2; /* no disconnect expected */
- #define SDU 0x80 /* cmd: disconnect will raise error */
- #define CHM 0x40 /* sta: chained mode */
- #define WSS 0x08 /* sta: wide scsi send [W]*/
- #define WSR 0x01 /* sta: wide scsi received [W]*/
-
-/*03*/ u8 nc_scntl3; /* cnf system clock dependent */
- #define EWS 0x08 /* cmd: enable wide scsi [W]*/
- #define ULTRA 0x80 /* cmd: ULTRA enable */
- /* bits 0-2, 7 rsvd for C1010 */
-
-/*04*/ u8 nc_scid; /* cnf host adapter scsi address */
- #define RRE 0x40 /* r/w:e enable response to resel. */
- #define SRE 0x20 /* r/w:e enable response to select */
-
-/*05*/ u8 nc_sxfer; /* ### Sync speed and count */
- /* bits 6-7 rsvd for C1010 */
-
-/*06*/ u8 nc_sdid; /* ### Destination-ID */
-
-/*07*/ u8 nc_gpreg; /* ??? IO-Pins */
-
-/*08*/ u8 nc_sfbr; /* ### First byte in phase */
-
-/*09*/ u8 nc_socl;
- #define CREQ 0x80 /* r/w: SCSI-REQ */
- #define CACK 0x40 /* r/w: SCSI-ACK */
- #define CBSY 0x20 /* r/w: SCSI-BSY */
- #define CSEL 0x10 /* r/w: SCSI-SEL */
- #define CATN 0x08 /* r/w: SCSI-ATN */
- #define CMSG 0x04 /* r/w: SCSI-MSG */
- #define CC_D 0x02 /* r/w: SCSI-C_D */
- #define CI_O 0x01 /* r/w: SCSI-I_O */
-
-/*0a*/ u8 nc_ssid;
-
-/*0b*/ u8 nc_sbcl;
-
-/*0c*/ u8 nc_dstat;
- #define DFE 0x80 /* sta: dma fifo empty */
- #define MDPE 0x40 /* int: master data parity error */
- #define BF 0x20 /* int: script: bus fault */
- #define ABRT 0x10 /* int: script: command aborted */
- #define SSI 0x08 /* int: script: single step */
- #define SIR 0x04 /* int: script: interrupt instruct. */
- #define IID 0x01 /* int: script: illegal instruct. */
-
-/*0d*/ u8 nc_sstat0;
- #define ILF 0x80 /* sta: data in SIDL register lsb */
- #define ORF 0x40 /* sta: data in SODR register lsb */
- #define OLF 0x20 /* sta: data in SODL register lsb */
- #define AIP 0x10 /* sta: arbitration in progress */
- #define LOA 0x08 /* sta: arbitration lost */
- #define WOA 0x04 /* sta: arbitration won */
- #define IRST 0x02 /* sta: scsi reset signal */
- #define SDP 0x01 /* sta: scsi parity signal */
-
-/*0e*/ u8 nc_sstat1;
- #define FF3210 0xf0 /* sta: bytes in the scsi fifo */
-
-/*0f*/ u8 nc_sstat2;
- #define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
- #define ORF1 0x40 /* sta: data in SODR register msb[W]*/
- #define OLF1 0x20 /* sta: data in SODL register msb[W]*/
- #define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */
- #define LDSC 0x02 /* sta: disconnect & reconnect */
-
-/*10*/ u8 nc_dsa; /* --> Base page */
-/*11*/ u8 nc_dsa1;
-/*12*/ u8 nc_dsa2;
-/*13*/ u8 nc_dsa3;
-
-/*14*/ u8 nc_istat; /* --> Main Command and status */
- #define CABRT 0x80 /* cmd: abort current operation */
- #define SRST 0x40 /* mod: reset chip */
- #define SIGP 0x20 /* r/w: message from host to ncr */
- #define SEM 0x10 /* r/w: message between host + ncr */
- #define CON 0x08 /* sta: connected to scsi */
- #define INTF 0x04 /* sta: int on the fly (reset by wr)*/
- #define SIP 0x02 /* sta: scsi-interrupt */
- #define DIP 0x01 /* sta: host/script interrupt */
-
-/*15*/ u8 nc_istat1; /* 896 and later cores only */
- #define FLSH 0x04 /* sta: chip is flushing */
- #define SRUN 0x02 /* sta: scripts are running */
- #define SIRQD 0x01 /* r/w: disable INT pin */
-
-/*16*/ u8 nc_mbox0; /* 896 and later cores only */
-/*17*/ u8 nc_mbox1; /* 896 and later cores only */
-
-/*18*/ u8 nc_ctest0;
- #define EHP 0x04 /* 720 even host parity */
-/*19*/ u8 nc_ctest1;
-
-/*1a*/ u8 nc_ctest2;
- #define CSIGP 0x40
- /* bits 0-2,7 rsvd for C1010 */
-
-/*1b*/ u8 nc_ctest3;
- #define FLF 0x08 /* cmd: flush dma fifo */
- #define CLF 0x04 /* cmd: clear dma fifo */
- #define FM 0x02 /* mod: fetch pin mode */
- #define WRIE 0x01 /* mod: write and invalidate enable */
- /* bits 4-7 rsvd for C1010 */
-
-/*1c*/ u32 nc_temp; /* ### Temporary stack */
-
-/*20*/ u8 nc_dfifo;
-/*21*/ u8 nc_ctest4;
- #define MUX 0x80 /* 720 host bus multiplex mode */
- #define BDIS 0x80 /* mod: burst disable */
- #define MPEE 0x08 /* mod: master parity error enable */
-
-/*22*/ u8 nc_ctest5;
- #define DFS 0x20 /* mod: dma fifo size */
- /* bits 0-1, 3-7 rsvd for C1010 */
-/*23*/ u8 nc_ctest6;
-
-/*24*/ u32 nc_dbc; /* ### Byte count and command */
-/*28*/ u32 nc_dnad; /* ### Next command register */
-/*2c*/ u32 nc_dsp; /* --> Script Pointer */
-/*30*/ u32 nc_dsps; /* --> Script pointer save/opcode#2 */
-
-/*34*/ u8 nc_scratcha; /* Temporary register a */
-/*35*/ u8 nc_scratcha1;
-/*36*/ u8 nc_scratcha2;
-/*37*/ u8 nc_scratcha3;
-
-/*38*/ u8 nc_dmode;
- #define BL_2 0x80 /* mod: burst length shift value +2 */
- #define BL_1 0x40 /* mod: burst length shift value +1 */
- #define ERL 0x08 /* mod: enable read line */
- #define ERMP 0x04 /* mod: enable read multiple */
- #define BOF 0x02 /* mod: burst op code fetch */
-
-/*39*/ u8 nc_dien;
-/*3a*/ u8 nc_sbr;
-
-/*3b*/ u8 nc_dcntl; /* --> Script execution control */
- #define CLSE 0x80 /* mod: cache line size enable */
- #define PFF 0x40 /* cmd: pre-fetch flush */
- #define PFEN 0x20 /* mod: pre-fetch enable */
- #define EA 0x20 /* mod: 720 enable-ack */
- #define SSM 0x10 /* mod: single step mode */
- #define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
- #define STD 0x04 /* cmd: start dma mode */
- #define IRQD 0x02 /* mod: irq disable */
- #define NOCOM 0x01 /* cmd: protect sfbr while reselect */
- /* bits 0-1 rsvd for C1010 */
-
-/*3c*/ u32 nc_adder;
-
-/*40*/ u16 nc_sien; /* -->: interrupt enable */
-/*42*/ u16 nc_sist; /* <--: interrupt status */
- #define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
- #define STO 0x0400/* sta: timeout (select) */
- #define GEN 0x0200/* sta: timeout (general) */
- #define HTH 0x0100/* sta: timeout (handshake) */
- #define MA 0x80 /* sta: phase mismatch */
- #define CMP 0x40 /* sta: arbitration complete */
- #define SEL 0x20 /* sta: selected by another device */
- #define RSL 0x10 /* sta: reselected by another device*/
- #define SGE 0x08 /* sta: gross error (over/underflow)*/
- #define UDC 0x04 /* sta: unexpected disconnect */
- #define RST 0x02 /* sta: scsi bus reset detected */
- #define PAR 0x01 /* sta: scsi parity error */
-
-/*44*/ u8 nc_slpar;
-/*45*/ u8 nc_swide;
-/*46*/ u8 nc_macntl;
-/*47*/ u8 nc_gpcntl;
-/*48*/ u8 nc_stime0; /* cmd: timeout for select&handshake*/
-/*49*/ u8 nc_stime1; /* cmd: timeout user defined */
-/*4a*/ u16 nc_respid; /* sta: Reselect-IDs */
-
-/*4c*/ u8 nc_stest0;
-
-/*4d*/ u8 nc_stest1;
- #define SCLK 0x80 /* Use the PCI clock as SCSI clock */
- #define DBLEN 0x08 /* clock doubler running */
- #define DBLSEL 0x04 /* clock doubler selected */
-
-
-/*4e*/ u8 nc_stest2;
- #define ROF 0x40 /* reset scsi offset (after gross error!) */
- #define DIF 0x20 /* 720 SCSI differential mode */
- #define EXT 0x02 /* extended filtering */
-
-/*4f*/ u8 nc_stest3;
- #define TE 0x80 /* c: tolerAnt enable */
- #define HSC 0x20 /* c: Halt SCSI Clock */
- #define CSF 0x02 /* c: clear scsi fifo */
-
-/*50*/ u16 nc_sidl; /* Lowlevel: latched from scsi data */
-/*52*/ u8 nc_stest4;
- #define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
- #define SMODE_HVD 0x40 /* High Voltage Differential */
- #define SMODE_SE 0x80 /* Single Ended */
- #define SMODE_LVD 0xc0 /* Low Voltage Differential */
- #define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */
- /* bits 0-5 rsvd for C1010 */
-
-/*53*/ u8 nc_53_;
-/*54*/ u16 nc_sodl; /* Lowlevel: data out to scsi data */
-/*56*/ u8 nc_ccntl0; /* Chip Control 0 (896) */
- #define ENPMJ 0x80 /* Enable Phase Mismatch Jump */
- #define PMJCTL 0x40 /* Phase Mismatch Jump Control */
- #define ENNDJ 0x20 /* Enable Non Data PM Jump */
- #define DISFC 0x10 /* Disable Auto FIFO Clear */
- #define DILS 0x02 /* Disable Internal Load/Store */
- #define DPR 0x01 /* Disable Pipe Req */
-
-/*57*/ u8 nc_ccntl1; /* Chip Control 1 (896) */
- #define ZMOD 0x80 /* High Impedance Mode */
- #define DIC 0x10 /* Disable Internal Cycles */
- #define DDAC 0x08 /* Disable Dual Address Cycle */
- #define XTIMOD 0x04 /* 64-bit Table Ind. Indexing Mode */
- #define EXTIBMV 0x02 /* Enable 64-bit Table Ind. BMOV */
- #define EXDBMV 0x01 /* Enable 64-bit Direct BMOV */
-
-/*58*/ u16 nc_sbdl; /* Lowlevel: data from scsi data */
-/*5a*/ u16 nc_5a_;
-
-/*5c*/ u8 nc_scr0; /* Working register B */
-/*5d*/ u8 nc_scr1; /* */
-/*5e*/ u8 nc_scr2; /* */
-/*5f*/ u8 nc_scr3; /* */
-
-/*60*/ u8 nc_scrx[64]; /* Working register C-R */
-/*a0*/ u32 nc_mmrs; /* Memory Move Read Selector */
-/*a4*/ u32 nc_mmws; /* Memory Move Write Selector */
-/*a8*/ u32 nc_sfs; /* Script Fetch Selector */
-/*ac*/ u32 nc_drs; /* DSA Relative Selector */
-/*b0*/ u32 nc_sbms; /* Static Block Move Selector */
-/*b4*/ u32 nc_dbms; /* Dynamic Block Move Selector */
-/*b8*/ u32 nc_dnad64; /* DMA Next Address 64 */
-/*bc*/ u16 nc_scntl4; /* C1010 only */
- #define U3EN 0x80 /* Enable Ultra 3 */
- #define AIPEN 0x40 /* Allow check upper byte lanes */
- #define XCLKH_DT 0x08 /* Extra clock of data hold on DT
- transfer edge */
- #define XCLKH_ST 0x04 /* Extra clock of data hold on ST
- transfer edge */
-
-/*be*/ u8 nc_aipcntl0; /* Epat Control 1 C1010 only */
-/*bf*/ u8 nc_aipcntl1; /* AIP Control C1010_66 Only */
-
-/*c0*/ u32 nc_pmjad1; /* Phase Mismatch Jump Address 1 */
-/*c4*/ u32 nc_pmjad2; /* Phase Mismatch Jump Address 2 */
-/*c8*/ u8 nc_rbc; /* Remaining Byte Count */
-/*c9*/ u8 nc_rbc1; /* */
-/*ca*/ u8 nc_rbc2; /* */
-/*cb*/ u8 nc_rbc3; /* */
-
-/*cc*/ u8 nc_ua; /* Updated Address */
-/*cd*/ u8 nc_ua1; /* */
-/*ce*/ u8 nc_ua2; /* */
-/*cf*/ u8 nc_ua3; /* */
-/*d0*/ u32 nc_esa; /* Entry Storage Address */
-/*d4*/ u8 nc_ia; /* Instruction Address */
-/*d5*/ u8 nc_ia1;
-/*d6*/ u8 nc_ia2;
-/*d7*/ u8 nc_ia3;
-/*d8*/ u32 nc_sbc; /* SCSI Byte Count (3 bytes only) */
-/*dc*/ u32 nc_csbc; /* Cumulative SCSI Byte Count */
-
- /* Following for C1010 only */
-/*e0*/ u16 nc_crcpad; /* CRC Value */
-/*e2*/ u8 nc_crccntl0; /* CRC control register */
- #define SNDCRC 0x10 /* Send CRC Request */
-/*e3*/ u8 nc_crccntl1; /* CRC control register */
-/*e4*/ u32 nc_crcdata; /* CRC data register */
-/*e8*/ u32 nc_e8_; /* rsvd */
-/*ec*/ u32 nc_ec_; /* rsvd */
-/*f0*/ u16 nc_dfbc; /* DMA FIFO byte count */
-
-};
-
-/*-----------------------------------------------------------
-**
-** Utility macros for the script.
-**
-**-----------------------------------------------------------
-*/
-
-#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
-#define REG(r) REGJ (nc_, r)
-
-typedef u32 ncrcmd;
-
-/*-----------------------------------------------------------
-**
-** SCSI phases
-**
-** DT phases illegal for ncr driver.
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_DATA_OUT 0x00000000
-#define SCR_DATA_IN 0x01000000
-#define SCR_COMMAND 0x02000000
-#define SCR_STATUS 0x03000000
-#define SCR_DT_DATA_OUT 0x04000000
-#define SCR_DT_DATA_IN 0x05000000
-#define SCR_MSG_OUT 0x06000000
-#define SCR_MSG_IN 0x07000000
-
-#define SCR_ILG_OUT 0x04000000
-#define SCR_ILG_IN 0x05000000
-
-/*-----------------------------------------------------------
-**
-** Data transfer via SCSI.
-**
-**-----------------------------------------------------------
-**
-** MOVE_ABS (LEN)
-** <<start address>>
-**
-** MOVE_IND (LEN)
-** <<dnad_offset>>
-**
-** MOVE_TBL
-** <<dnad_offset>>
-**
-**-----------------------------------------------------------
-*/
-
-#define OPC_MOVE 0x08000000
-
-#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
-#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
-#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE)
-
-#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
-#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
-#define SCR_CHMOV_TBL (0x10000000)
-
-struct scr_tblmove {
- u32 size;
- u32 addr;
-};
-
-/*-----------------------------------------------------------
-**
-** Selection
-**
-**-----------------------------------------------------------
-**
-** SEL_ABS | SCR_ID (0..15) [ | REL_JMP]
-** <<alternate_address>>
-**
-** SEL_TBL | << dnad_offset>> [ | REL_JMP]
-** <<alternate_address>>
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_SEL_ABS 0x40000000
-#define SCR_SEL_ABS_ATN 0x41000000
-#define SCR_SEL_TBL 0x42000000
-#define SCR_SEL_TBL_ATN 0x43000000
-
-
-#ifdef SCSI_NCR_BIG_ENDIAN
-struct scr_tblsel {
- u8 sel_scntl3;
- u8 sel_id;
- u8 sel_sxfer;
- u8 sel_scntl4;
-};
-#else
-struct scr_tblsel {
- u8 sel_scntl4;
- u8 sel_sxfer;
- u8 sel_id;
- u8 sel_scntl3;
-};
-#endif
-
-#define SCR_JMP_REL 0x04000000
-#define SCR_ID(id) (((u32)(id)) << 16)
-
-/*-----------------------------------------------------------
-**
-** Waiting for Disconnect or Reselect
-**
-**-----------------------------------------------------------
-**
-** WAIT_DISC
-** dummy: <<alternate_address>>
-**
-** WAIT_RESEL
-** <<alternate_address>>
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_WAIT_DISC 0x48000000
-#define SCR_WAIT_RESEL 0x50000000
-
-/*-----------------------------------------------------------
-**
-** Bit Set / Reset
-**
-**-----------------------------------------------------------
-**
-** SET (flags {|.. })
-**
-** CLR (flags {|.. })
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_SET(f) (0x58000000 | (f))
-#define SCR_CLR(f) (0x60000000 | (f))
-
-#define SCR_CARRY 0x00000400
-#define SCR_TRG 0x00000200
-#define SCR_ACK 0x00000040
-#define SCR_ATN 0x00000008
-
-
-
-
-/*-----------------------------------------------------------
-**
-** Memory to memory move
-**
-**-----------------------------------------------------------
-**
-** COPY (bytecount)
-** << source_address >>
-** << destination_address >>
-**
-** SCR_COPY sets the NO FLUSH option by default.
-** SCR_COPY_F does not set this option.
-**
-** For chips which do not support this option,
-** ncr_copy_and_bind() will remove this bit.
-**-----------------------------------------------------------
-*/
-
-#define SCR_NO_FLUSH 0x01000000
-
-#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
-#define SCR_COPY_F(n) (0xc0000000 | (n))
-
-/*-----------------------------------------------------------
-**
-** Register move and binary operations
-**
-**-----------------------------------------------------------
-**
-** SFBR_REG (reg, op, data) reg = SFBR op data
-** << 0 >>
-**
-** REG_SFBR (reg, op, data) SFBR = reg op data
-** << 0 >>
-**
-** REG_REG (reg, op, data) reg = reg op data
-** << 0 >>
-**
-**-----------------------------------------------------------
-** On 810A, 860, 825A, 875, 895 and 896 chips the content
-** of SFBR register can be used as data (SCR_SFBR_DATA).
-** The 896 has additionnal IO registers starting at
-** offset 0x80. Bit 7 of register offset is stored in
-** bit 7 of the SCRIPTS instruction first DWORD.
-**-----------------------------------------------------------
-*/
-
-#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80))
-
-#define SCR_SFBR_REG(reg,op,data) \
- (0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
-
-#define SCR_REG_SFBR(reg,op,data) \
- (0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
-
-#define SCR_REG_REG(reg,op,data) \
- (0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
-
-
-#define SCR_LOAD 0x00000000
-#define SCR_SHL 0x01000000
-#define SCR_OR 0x02000000
-#define SCR_XOR 0x03000000
-#define SCR_AND 0x04000000
-#define SCR_SHR 0x05000000
-#define SCR_ADD 0x06000000
-#define SCR_ADDC 0x07000000
-
-#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */
-
-/*-----------------------------------------------------------
-**
-** FROM_REG (reg) SFBR = reg
-** << 0 >>
-**
-** TO_REG (reg) reg = SFBR
-** << 0 >>
-**
-** LOAD_REG (reg, data) reg = <data>
-** << 0 >>
-**
-** LOAD_SFBR(data) SFBR = <data>
-** << 0 >>
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_FROM_REG(reg) \
- SCR_REG_SFBR(reg,SCR_OR,0)
-
-#define SCR_TO_REG(reg) \
- SCR_SFBR_REG(reg,SCR_OR,0)
-
-#define SCR_LOAD_REG(reg,data) \
- SCR_REG_REG(reg,SCR_LOAD,data)
-
-#define SCR_LOAD_SFBR(data) \
- (SCR_REG_SFBR (gpreg, SCR_LOAD, data))
-
-/*-----------------------------------------------------------
-**
-** LOAD from memory to register.
-** STORE from register to memory.
-**
-** Only supported by 810A, 860, 825A, 875, 895 and 896.
-**
-**-----------------------------------------------------------
-**
-** LOAD_ABS (LEN)
-** <<start address>>
-**
-** LOAD_REL (LEN) (DSA relative)
-** <<dsa_offset>>
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
-#define SCR_NO_FLUSH2 0x02000000
-#define SCR_DSA_REL2 0x10000000
-
-#define SCR_LOAD_R(reg, how, n) \
- (0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
-
-#define SCR_STORE_R(reg, how, n) \
- (0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
-
-#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
-#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
-#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n)
-#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n)
-
-#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
-#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
-#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
-#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
-
-
-/*-----------------------------------------------------------
-**
-** Waiting for Disconnect or Reselect
-**
-**-----------------------------------------------------------
-**
-** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
-** <<address>>
-**
-** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
-** <<distance>>
-**
-** CALL [ | IFTRUE/IFFALSE ( ... ) ]
-** <<address>>
-**
-** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
-** <<distance>>
-**
-** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
-** <<dummy>>
-**
-** INT [ | IFTRUE/IFFALSE ( ... ) ]
-** <<ident>>
-**
-** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
-** <<ident>>
-**
-** Conditions:
-** WHEN (phase)
-** IF (phase)
-** CARRYSET
-** DATA (data, mask)
-**
-**-----------------------------------------------------------
-*/
-
-#define SCR_NO_OP 0x80000000
-#define SCR_JUMP 0x80080000
-#define SCR_JUMP64 0x80480000
-#define SCR_JUMPR 0x80880000
-#define SCR_CALL 0x88080000
-#define SCR_CALLR 0x88880000
-#define SCR_RETURN 0x90080000
-#define SCR_INT 0x98080000
-#define SCR_INT_FLY 0x98180000
-
-#define IFFALSE(arg) (0x00080000 | (arg))
-#define IFTRUE(arg) (0x00000000 | (arg))
-
-#define WHEN(phase) (0x00030000 | (phase))
-#define IF(phase) (0x00020000 | (phase))
-
-#define DATA(D) (0x00040000 | ((D) & 0xff))
-#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
-
-#define CARRYSET (0x00200000)
-
-/*-----------------------------------------------------------
-**
-** SCSI constants.
-**
-**-----------------------------------------------------------
-*/
-
-/*
-** Messages
-*/
-
-#define M_COMPLETE COMMAND_COMPLETE
-#define M_EXTENDED EXTENDED_MESSAGE
-#define M_SAVE_DP SAVE_POINTERS
-#define M_RESTORE_DP RESTORE_POINTERS
-#define M_DISCONNECT DISCONNECT
-#define M_ID_ERROR INITIATOR_ERROR
-#define M_ABORT ABORT_TASK_SET
-#define M_REJECT MESSAGE_REJECT
-#define M_NOOP NOP
-#define M_PARITY MSG_PARITY_ERROR
-#define M_LCOMPLETE LINKED_CMD_COMPLETE
-#define M_FCOMPLETE LINKED_FLG_CMD_COMPLETE
-#define M_RESET TARGET_RESET
-#define M_ABORT_TAG ABORT_TASK
-#define M_CLEAR_QUEUE CLEAR_TASK_SET
-#define M_INIT_REC INITIATE_RECOVERY
-#define M_REL_REC RELEASE_RECOVERY
-#define M_TERMINATE (0x11)
-#define M_SIMPLE_TAG SIMPLE_QUEUE_TAG
-#define M_HEAD_TAG HEAD_OF_QUEUE_TAG
-#define M_ORDERED_TAG ORDERED_QUEUE_TAG
-#define M_IGN_RESIDUE IGNORE_WIDE_RESIDUE
-#define M_IDENTIFY (0x80)
-
-#define M_X_MODIFY_DP EXTENDED_MODIFY_DATA_POINTER
-#define M_X_SYNC_REQ EXTENDED_SDTR
-#define M_X_WIDE_REQ EXTENDED_WDTR
-#define M_X_PPR_REQ EXTENDED_PPR
-
-/*
-** Status
-*/
-
-#define S_GOOD (0x00)
-#define S_CHECK_COND (0x02)
-#define S_COND_MET (0x04)
-#define S_BUSY (0x08)
-#define S_INT (0x10)
-#define S_INT_COND_MET (0x14)
-#define S_CONFLICT (0x18)
-#define S_TERMINATED (0x20)
-#define S_QUEUE_FULL (0x28)
-#define S_ILLEGAL (0xff)
-#define S_SENSE (0x80)
-
-/*
- * End of ncrreg from FreeBSD
- */
-
-#endif /* defined SYM53C8XX_DEFS_H */