diff options
Diffstat (limited to 'drivers')
301 files changed, 4323 insertions, 3169 deletions
diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index ea92bac42c5..09c69806c1f 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -176,16 +176,6 @@ static int __init dmi_enable_osi_linux(const struct dmi_system_id *d) acpi_dmi_osi_linux(1, d); /* enable */ return 0; } -static int __init dmi_disable_osi_linux(const struct dmi_system_id *d) -{ - acpi_dmi_osi_linux(0, d); /* disable */ - return 0; -} -static int __init dmi_unknown_osi_linux(const struct dmi_system_id *d) -{ - acpi_dmi_osi_linux(-1, d); /* unknown */ - return 0; -} static int __init dmi_disable_osi_vista(const struct dmi_system_id *d) { printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); @@ -193,295 +183,21 @@ static int __init dmi_disable_osi_vista(const struct dmi_system_id *d) return 0; } -/* - * Most BIOS that invoke OSI(Linux) do nothing with it. - * But some cause Linux to break. - * Only a couple use it to make Linux run better. - * - * Thus, Linux should continue to disable OSI(Linux) by default, - * should continue to discourage BIOS writers from using it, and - * should whitelist the few existing systems that require it. - * - * If it appears clear a vendor isn't using OSI(Linux) - * for anything constructive, blacklist them by name to disable - * unnecessary dmesg warnings on all of their products. - */ - static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { - /* - * Disable OSI(Linux) warnings on all "Acer, inc." - * - * _OSI(Linux) disables the latest Windows BIOS code: - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"), - * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"), - * _OSI(Linux) effect unknown: - * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"), - */ - /* - * note that dmi_check_system() uses strstr() - * to match sub-strings rather than !strcmp(), - * so "Acer" below matches "Acer, inc." above. - */ - /* - * Disable OSI(Linux) warnings on all "Acer" - * - * _OSI(Linux) effect unknown: - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"), - * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"), - * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"), - * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"), - * - * _OSI(Linux) is a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Acer", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "Apple Computer, Inc." - * Disable OSI(Linux) warnings on all "Apple Inc." - * - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"), - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"), - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"), - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"), - * _OSI(Linux) effect unknown: - * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"), - * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Apple", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Apple"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "BenQ" - * - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "Joybook S31"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "BenQ", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "BenQ"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "Clevo Co." - * - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "M570RU"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Clevo", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."), - }, - }, - /* - * Disable OSI(Linux) warnings on all "COMPAL" - * - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_BOARD_NAME, "HEL8X"), - * _OSI(Linux) unknown effect: - * DMI_MATCH(DMI_BOARD_NAME, "IFL91"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Compal", - .matches = { - DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"), - }, - }, - { /* OSI(Linux) touches USB, unknown side-effect */ - .callback = dmi_disable_osi_linux, - .ident = "Dell Dimension 5150", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM051"), - }, - }, - { /* OSI(Linux) is a NOP */ - .callback = dmi_disable_osi_linux, - .ident = "Dell i1501", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"), - }, - }, - { /* OSI(Linux) effect unknown */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell Latitude D830", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"), - }, - }, - { /* OSI(Linux) effect unknown */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell OptiPlex GX620", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"), - }, - }, - { /* OSI(Linux) causes some USB initialization to not run */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell OptiPlex 755", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 755"), - }, - }, - { /* OSI(Linux) effect unknown */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell PE 1900", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"), - }, - }, - { /* OSI(Linux) is a NOP */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell PE 1950", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"), - }, - }, - { /* OSI(Linux) is a NOP */ - .callback = dmi_disable_osi_linux, - .ident = "Dell PE R200", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R200"), - }, - }, - { /* OSI(Linux) touches USB */ - .callback = dmi_disable_osi_linux, - .ident = "Dell PR 390", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"), - }, - }, - { /* OSI(Linux) touches USB */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell PR 390", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 690"), - }, - }, - { /* OSI(Linux) unknown - ASL looks benign, but may effect dock/SMM */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell PR M4300", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Precision M4300"), - }, - }, - { /* OSI(Linux) is a NOP */ - .callback = dmi_disable_osi_linux, - .ident = "Dell Vostro 1000", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1000"), - }, - }, - { /* OSI(Linux) effect unknown */ - .callback = dmi_unknown_osi_linux, - .ident = "Dell PE SC440", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"), - }, - }, - { /* OSI(Linux) effect unknown */ - .callback = dmi_unknown_osi_linux, - .ident = "Dialogue Flybook V5", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dialogue Technology Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "Flybook V5"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "FUJITSU SIEMENS" - * - * _OSI(Linux) disables latest Windows BIOS code: - * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2510"), - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"), - * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"), - * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"), - * DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"), - * _OSI(Linux) unknown effect: - * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Fujitsu Siemens", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - }, - }, { .callback = dmi_disable_osi_vista, .ident = "Fujitsu Siemens", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), - DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"), + DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"), }, }, + /* - * Disable OSI(Linux) warnings on all "Hewlett-Packard" - * - * _OSI(Linux) confirmed to be a NOP: - * .ident = "HP Pavilion tx 1000" - * DMI_MATCH(DMI_BOARD_NAME, "30BF"), - * .ident = "HP Pavilion dv2000" - * DMI_MATCH(DMI_BOARD_NAME, "30B5"), - * .ident = "HP Pavilion dv5000", - * DMI_MATCH(DMI_BOARD_NAME, "30A7"), - * .ident = "HP Pavilion dv6300 30BC", - * DMI_MATCH(DMI_BOARD_NAME, "30BC"), - * .ident = "HP Pavilion dv6000", - * DMI_MATCH(DMI_BOARD_NAME, "30B7"), - * DMI_MATCH(DMI_BOARD_NAME, "30B8"), - * .ident = "HP Pavilion dv9000", - * DMI_MATCH(DMI_BOARD_NAME, "30B9"), - * .ident = "HP Pavilion dv9500", - * DMI_MATCH(DMI_BOARD_NAME, "30CB"), - * .ident = "HP/Compaq Presario C500", - * DMI_MATCH(DMI_BOARD_NAME, "30C6"), - * .ident = "HP/Compaq Presario F500", - * DMI_MATCH(DMI_BOARD_NAME, "30D3"), - * _OSI(Linux) unknown effect: - * .ident = "HP Pavilion dv6500", - * DMI_MATCH(DMI_BOARD_NAME, "30D0"), + * BIOS invocation of _OSI(Linux) is almost always a BIOS bug. + * Linux ignores it, except for the machines enumerated below. */ - { - .callback = dmi_disable_osi_linux, - .ident = "Hewlett-Packard", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - }, - }, + /* * Lenovo has a mix of systems OSI(Linux) situations * and thus we can not wildcard the vendor. @@ -519,113 +235,6 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"), }, }, - { - .callback = dmi_disable_osi_linux, - .ident = "Lenovo 3000 V100", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"), - }, - }, - { - .callback = dmi_disable_osi_linux, - .ident = "Lenovo 3000 N100", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "LG Electronics" - * - * _OSI(Linux) confirmed to be a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"), - * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"), - * - * unknown: - * DMI_MATCH(DMI_PRODUCT_NAME, "S1-MDGDG"), - * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "LG", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"), - }, - }, - /* NEC - OSI(Linux) effect unknown */ - { - .callback = dmi_unknown_osi_linux, - .ident = "NEC VERSA M360", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "NEC Computers SAS"), - DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"), - }, - }, - /* Panasonic */ - { - .callback = dmi_unknown_osi_linux, - .ident = "Panasonic", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"), - /* Toughbook CF-52 */ - DMI_MATCH(DMI_PRODUCT_NAME, "CF-52CCABVBG"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "Samsung Electronics" - * - * OSI(Linux) disables PNP0C32 and other BIOS code for Windows: - * DMI_MATCH(DMI_PRODUCT_NAME, "R40P/R41P"), - * DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Samsung", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - }, - }, - /* - * Disable OSI(Linux) warnings on all "Sony Corporation" - * - * _OSI(Linux) is a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NR11S_S"), - * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"), - * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"), - * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"), - * _OSI(Linux) unknown effect: - * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Sony", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), - }, - }, - /* - * Disable OSI(Linux) warnings on all "TOSHIBA" - * - * _OSI(Linux) breaks sound (bugzilla 7787): - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P100"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P105"), - * _OSI(Linux) is a NOP: - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A100"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A210"), - * _OSI(Linux) unknown effect: - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A135"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A200"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P205"), - * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U305"), - */ - { - .callback = dmi_disable_osi_linux, - .ident = "Toshiba", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), - }, - }, {} }; diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index cf41f9fc24a..30f3ef236ec 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -219,7 +219,8 @@ static void gpe_transaction(struct acpi_ec *ec, u8 status) goto unlock; err: /* false interrupt, state didn't change */ - ++ec->curr->irq_count; + if (in_interrupt()) + ++ec->curr->irq_count; unlock: spin_unlock_irqrestore(&ec->curr_lock, flags); } diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 4be252145cb..c8111424dcb 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -35,7 +35,6 @@ #include <linux/interrupt.h> #include <linux/kmod.h> #include <linux/delay.h> -#include <linux/dmi.h> #include <linux/workqueue.h> #include <linux/nmi.h> #include <linux/acpi.h> @@ -97,54 +96,44 @@ static DEFINE_SPINLOCK(acpi_res_lock); static char osi_additional_string[OSI_STRING_LENGTH_MAX]; /* - * "Ode to _OSI(Linux)" + * The story of _OSI(Linux) * - * osi_linux -- Control response to BIOS _OSI(Linux) query. + * From pre-history through Linux-2.6.22, + * Linux responded TRUE upon a BIOS OSI(Linux) query. * - * As Linux evolves, the features that it supports change. - * So an OSI string such as "Linux" is not specific enough - * to be useful across multiple versions of Linux. It - * doesn't identify any particular feature, interface, - * or even any particular version of Linux... + * Unfortunately, reference BIOS writers got wind of this + * and put OSI(Linux) in their example code, quickly exposing + * this string as ill-conceived and opening the door to + * an un-bounded number of BIOS incompatibilities. * - * Unfortunately, Linux-2.6.22 and earlier responded "yes" - * to a BIOS _OSI(Linux) query. When - * a reference mobile BIOS started using it, its use - * started to spread to many vendor platforms. - * As it is not supportable, we need to halt that spread. + * For example, OSI(Linux) was used on resume to re-POST a + * video card on one system, because Linux at that time + * could not do a speedy restore in its native driver. + * But then upon gaining quick native restore capability, + * Linux has no way to tell the BIOS to skip the time-consuming + * POST -- putting Linux at a permanent performance disadvantage. + * On another system, the BIOS writer used OSI(Linux) + * to infer native OS support for IPMI! On other systems, + * OSI(Linux) simply got in the way of Linux claiming to + * be compatible with other operating systems, exposing + * BIOS issues such as skipped device initialization. * - * Today, most BIOS references to _OSI(Linux) are noise -- - * they have no functional effect and are just dead code - * carried over from the reference BIOS. - * - * The next most common case is that _OSI(Linux) harms Linux, - * usually by causing the BIOS to follow paths that are - * not tested during Windows validation. - * - * Finally, there is a short list of platforms - * where OSI(Linux) benefits Linux. - * - * In Linux-2.6.23, OSI(Linux) is first disabled by default. - * DMI is used to disable the dmesg warning about OSI(Linux) - * on platforms where it is known to have no effect. - * But a dmesg warning remains for systems where - * we do not know if OSI(Linux) is good or bad for the system. - * DMI is also used to enable OSI(Linux) for the machines - * that are known to need it. + * So "Linux" turned out to be a really poor chose of + * OSI string, and from Linux-2.6.23 onward we respond FALSE. * * BIOS writers should NOT query _OSI(Linux) on future systems. - * It will be ignored by default, and to get Linux to - * not ignore it will require a kernel source update to - * add a DMI entry, or a boot-time "acpi_osi=Linux" invocation. + * Linux will complain on the console when it sees it, and return FALSE. + * To get Linux to return TRUE for your system will require + * a kernel source update to add a DMI entry, + * or boot with "acpi_osi=Linux" */ -#define OSI_LINUX_ENABLE 0 static struct osi_linux { unsigned int enable:1; unsigned int dmi:1; unsigned int cmdline:1; unsigned int known:1; -} osi_linux = { OSI_LINUX_ENABLE, 0, 0, 0}; +} osi_linux = { 0, 0, 0, 0}; static void __init acpi_request_region (struct acpi_generic_address *addr, unsigned int length, char *desc) @@ -1296,34 +1285,6 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object) return (AE_OK); } -/** - * acpi_dmi_dump - dump DMI slots needed for blacklist entry - * - * Returns 0 on success - */ -static int acpi_dmi_dump(void) -{ - - if (!dmi_available) - return -1; - - printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n", - dmi_get_system_info(DMI_SYS_VENDOR)); - printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n", - dmi_get_system_info(DMI_PRODUCT_NAME)); - printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n", - dmi_get_system_info(DMI_PRODUCT_VERSION)); - printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n", - dmi_get_system_info(DMI_BOARD_NAME)); - printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n", - dmi_get_system_info(DMI_BIOS_VENDOR)); - printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n", - dmi_get_system_info(DMI_BIOS_DATE)); - - return 0; -} - - /****************************************************************************** * * FUNCTION: acpi_os_validate_interface @@ -1350,21 +1311,6 @@ acpi_os_validate_interface (char *interface) osi_linux.cmdline ? " via cmdline" : osi_linux.dmi ? " via DMI" : ""); - if (!osi_linux.dmi) { - if (acpi_dmi_dump()) - printk(KERN_NOTICE PREFIX - "[please extract dmidecode output]\n"); - printk(KERN_NOTICE PREFIX - "Please send DMI info above to " - "linux-acpi@vger.kernel.org\n"); - } - if (!osi_linux.known && !osi_linux.cmdline) { - printk(KERN_NOTICE PREFIX - "If \"acpi_osi=%sLinux\" works better, " - "please notify linux-acpi@vger.kernel.org\n", - osi_linux.enable ? "!" : ""); - } - if (osi_linux.enable) return AE_OK; } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index bd5253ee5c8..39b7233c348 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -751,16 +751,6 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device) if (!acpi_match_device_ids(device, button_device_ids)) device->wakeup.flags.run_wake = 1; - /* - * Don't set Power button GPE as run_wake - * if Fixed Power button is used - */ - if (!strcmp(device->pnp.hardware_id, "PNP0C0C") && - !(acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON)) { - device->wakeup.flags.run_wake = 0; - device->wakeup.flags.valid = 0; - } - end: if (ACPI_FAILURE(status)) device->flags.wake_capable = 0; diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 80c0868d048..28a691cc625 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -90,6 +90,18 @@ void __init acpi_old_suspend_ordering(void) old_suspend_ordering = true; } +/* + * According to the ACPI specification the BIOS should make sure that ACPI is + * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still, + * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI + * on such systems during resume. Unfortunately that doesn't help in + * particularly pathological cases in which SCI_EN has to be set directly on + * resume, although the specification states very clearly that this flag is + * owned by the hardware. The set_sci_en_on_resume variable will be set in such + * cases. + */ +static bool set_sci_en_on_resume; + /** * acpi_pm_disable_gpes - Disable the GPEs. */ @@ -235,7 +247,11 @@ static int acpi_suspend_enter(suspend_state_t pm_state) } /* If ACPI is not enabled by the BIOS, we need to enable it here. */ - acpi_enable(); + if (set_sci_en_on_resume) + acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1); + else + acpi_enable(); + /* Reprogram control registers and execute _BFS */ acpi_leave_sleep_state_prep(acpi_state); @@ -323,6 +339,12 @@ static int __init init_old_suspend_ordering(const struct dmi_system_id *d) return 0; } +static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d) +{ + set_sci_en_on_resume = true; + return 0; +} + static struct dmi_system_id __initdata acpisleep_dmi_table[] = { { .callback = init_old_suspend_ordering, @@ -340,6 +362,22 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"), }, }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Apple MacBook 1,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Apple MacMini 1,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"), + }, + }, {}, }; #endif /* CONFIG_SUSPEND */ diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c index 66aac06f2ac..40e60fc2e59 100644 --- a/drivers/acpi/toshiba_acpi.c +++ b/drivers/acpi/toshiba_acpi.c @@ -824,34 +824,36 @@ static int __init toshiba_acpi_init(void) toshiba_acpi_exit(); return -ENOMEM; } - } - /* Register input device for kill switch */ - toshiba_acpi.poll_dev = input_allocate_polled_device(); - if (!toshiba_acpi.poll_dev) { - printk(MY_ERR "unable to allocate kill-switch input device\n"); - toshiba_acpi_exit(); - return -ENOMEM; - } - toshiba_acpi.poll_dev->private = &toshiba_acpi; - toshiba_acpi.poll_dev->poll = bt_poll_rfkill; - toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */ - - toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name; - toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST; - toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */ - set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit); - set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit); - input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE); - input_sync(toshiba_acpi.poll_dev->input); - - ret = input_register_polled_device(toshiba_acpi.poll_dev); - if (ret) { - printk(MY_ERR "unable to register kill-switch input device\n"); - rfkill_free(toshiba_acpi.rfk_dev); - toshiba_acpi.rfk_dev = NULL; - toshiba_acpi_exit(); - return ret; + /* Register input device for kill switch */ + toshiba_acpi.poll_dev = input_allocate_polled_device(); + if (!toshiba_acpi.poll_dev) { + printk(MY_ERR + "unable to allocate kill-switch input device\n"); + toshiba_acpi_exit(); + return -ENOMEM; + } + toshiba_acpi.poll_dev->private = &toshiba_acpi; + toshiba_acpi.poll_dev->poll = bt_poll_rfkill; + toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */ + + toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name; + toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST; + /* Toshiba USB ID */ + toshiba_acpi.poll_dev->input->id.vendor = 0x0930; + set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit); + set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit); + input_report_switch(toshiba_acpi.poll_dev->input, + SW_RFKILL_ALL, TRUE); + input_sync(toshiba_acpi.poll_dev->input); + + ret = input_register_polled_device(toshiba_acpi.poll_dev); + if (ret) { + printk(MY_ERR + "unable to register kill-switch input device\n"); + toshiba_acpi_exit(); + return ret; + } } return 0; diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index e827be36ee8..f844941089b 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -259,34 +259,26 @@ acpi_evaluate_integer(acpi_handle handle, struct acpi_object_list *arguments, unsigned long long *data) { acpi_status status = AE_OK; - union acpi_object *element; + union acpi_object element; struct acpi_buffer buffer = { 0, NULL }; - if (!data) return AE_BAD_PARAMETER; - element = kzalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL); - if (!element) - return AE_NO_MEMORY; - buffer.length = sizeof(union acpi_object); - buffer.pointer = element; + buffer.pointer = &element; status = acpi_evaluate_object(handle, pathname, arguments, &buffer); if (ACPI_FAILURE(status)) { acpi_util_eval_error(handle, pathname, status); - kfree(element); return status; } - if (element->type != ACPI_TYPE_INTEGER) { + if (element.type != ACPI_TYPE_INTEGER) { acpi_util_eval_error(handle, pathname, AE_BAD_DATA); - kfree(element); return AE_BAD_DATA; } - *data = element->integer.value; - kfree(element); + *data = element.integer.value; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%llu]\n", *data)); diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 78fbec8ceda..421b7c71e72 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -153,7 +153,7 @@ config SATA_PROMISE If unsure, say N. config SATA_SX4 - tristate "Promise SATA SX4 support" + tristate "Promise SATA SX4 support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for Promise Serial ATA SX4. @@ -219,8 +219,8 @@ config PATA_ACPI otherwise unsupported hardware. config PATA_ALI - tristate "ALi PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "ALi PATA support" + depends on PCI help This option enables support for the ALi ATA interfaces found on the many ALi chipsets. @@ -263,7 +263,7 @@ config PATA_ATIIXP If unsure, say N. config PATA_CMD640_PCI - tristate "CMD640 PCI PATA support (Very Experimental)" + tristate "CMD640 PCI PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the CMD640 PCI IDE @@ -291,8 +291,8 @@ config PATA_CS5520 If unsure, say N. config PATA_CS5530 - tristate "CS5530 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "CS5530 PATA support" + depends on PCI help This option enables support for the Cyrix/NatSemi/AMD CS5530 companion chip used with the MediaGX/Geode processor family. @@ -309,8 +309,8 @@ config PATA_CS5535 If unsure, say N. config PATA_CS5536 - tristate "CS5536 PATA support (Experimental)" - depends on PCI && X86 && !X86_64 && EXPERIMENTAL + tristate "CS5536 PATA support" + depends on PCI && X86 && !X86_64 help This option enables support for the AMD CS5536 companion chip used with the Geode LX processor family. @@ -363,7 +363,7 @@ config PATA_HPT37X If unsure, say N. config PATA_HPT3X2N - tristate "HPT 372N/302N PATA support (Very Experimental)" + tristate "HPT 372N/302N PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the N variant HPT PATA @@ -389,8 +389,8 @@ config PATA_HPT3X3_DMA problems with DMA on this chipset. config PATA_ISAPNP - tristate "ISA Plug and Play PATA support (Experimental)" - depends on EXPERIMENTAL && ISAPNP + tristate "ISA Plug and Play PATA support" + depends on ISAPNP help This option enables support for ISA plug & play ATA controllers such as those found on old soundcards. @@ -498,8 +498,8 @@ config PATA_NINJA32 If unsure, say N. config PATA_NS87410 - tristate "Nat Semi NS87410 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Nat Semi NS87410 PATA support" + depends on PCI help This option enables support for the National Semiconductor NS87410 PCI-IDE controller. @@ -507,8 +507,8 @@ config PATA_NS87410 If unsure, say N. config PATA_NS87415 - tristate "Nat Semi NS87415 PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Nat Semi NS87415 PATA support" + depends on PCI help This option enables support for the National Semiconductor NS87415 PCI-IDE controller. @@ -544,8 +544,8 @@ config PATA_PCMCIA If unsure, say N. config PATA_PDC_OLD - tristate "Older Promise PATA controller support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "Older Promise PATA controller support" + depends on PCI help This option enables support for the Promise 20246, 20262, 20263, 20265 and 20267 adapters. @@ -559,7 +559,7 @@ config PATA_QDI Support for QDI 6500 and 6580 PATA controllers on VESA local bus. config PATA_RADISYS - tristate "RADISYS 82600 PATA support (Very Experimental)" + tristate "RADISYS 82600 PATA support (Experimental)" depends on PCI && EXPERIMENTAL help This option enables support for the RADISYS 82600 @@ -586,8 +586,8 @@ config PATA_RZ1000 If unsure, say N. config PATA_SC1200 - tristate "SC1200 PATA support (Very Experimental)" - depends on PCI && EXPERIMENTAL + tristate "SC1200 PATA support" + depends on PCI help This option enables support for the NatSemi/AMD SC1200 SoC companion chip used with the Geode processor family. @@ -620,8 +620,8 @@ config PATA_SIL680 If unsure, say N. config PATA_SIS - tristate "SiS PATA support (Experimental)" - depends on PCI && EXPERIMENTAL + tristate "SiS PATA support" + depends on PCI help This option enables support for SiS PATA controllers diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 8e37be19bbf..c11936e13dd 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1066,6 +1066,28 @@ static int piix_broken_suspend(void) if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL)) return 1; + /* TECRA M4 sometimes forgets its identify and reports bogus + * DMI information. As the bogus information is a bit + * generic, match as many entries as possible. This manual + * matching is necessary because dmi_system_id.matches is + * limited to four entries. + */ + if (dmi_get_system_info(DMI_SYS_VENDOR) && + dmi_get_system_info(DMI_PRODUCT_NAME) && + dmi_get_system_info(DMI_PRODUCT_VERSION) && + dmi_get_system_info(DMI_PRODUCT_SERIAL) && + dmi_get_system_info(DMI_BOARD_VENDOR) && + dmi_get_system_info(DMI_BOARD_NAME) && + dmi_get_system_info(DMI_BOARD_VERSION) && + !strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") && + !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") && + !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") && + !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") && + !strcmp(dmi_get_system_info(DMI_BOARD_VENDOR), "TOSHIBA") && + !strcmp(dmi_get_system_info(DMI_BOARD_NAME), "Portable PC") && + !strcmp(dmi_get_system_info(DMI_BOARD_VERSION), "Version A0")) + return 1; + return 0; } diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 4214bfb13bb..5e2eb740df4 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2492,6 +2492,13 @@ int ata_dev_configure(struct ata_device *dev) } } + if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) { + ata_dev_printk(dev, KERN_WARNING, "WARNING: device requires " + "firmware update to be fully functional.\n"); + ata_dev_printk(dev, KERN_WARNING, " contact the vendor " + "or visit http://ata.wiki.kernel.org.\n"); + } + return 0; err_out_nosup: @@ -4042,6 +4049,20 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ST380817AS", "3.42", ATA_HORKAGE_NONCQ }, { "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ }, + /* Seagate NCQ + FLUSH CACHE firmware bug */ + { "ST31500341AS", "9JU138", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST31000333AS", "9FZ136", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640623AS", "9FZ164", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3640323AS", "9FZ134", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320813AS", "9FZ182", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + { "ST3320613AS", "9FZ162", ATA_HORKAGE_NONCQ | + ATA_HORKAGE_FIRMWARE_WARN }, + /* Blacklist entries taken from Silicon Image 3124/3132 Windows driver .inf file - also several Linux problem reports */ { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index f2b83eabc7c..a098ba8eaab 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -382,10 +382,10 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* PCI clocking determines the ATA timing values to use */ /* info_hpt366 is safe against re-entry so we can scribble on it */ switch((reg1 & 0x700) >> 8) { - case 5: + case 9: hpriv = &hpt366_40; break; - case 9: + case 5: hpriv = &hpt366_25; break; default: diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 4e466eae8b4..4dd9a3b031e 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -44,7 +44,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_ninja32" -#define DRV_VERSION "0.1.1" +#define DRV_VERSION "0.1.3" /** @@ -130,7 +130,8 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) return rc; pci_set_master(dev); - /* Set up the register mappings */ + /* Set up the register mappings. We use the I/O mapping as only the + older chips also have MMIO on BAR 1 */ base = host->iomap[0]; if (!base) return -ENOMEM; @@ -167,8 +168,12 @@ static int ninja32_reinit_one(struct pci_dev *pdev) #endif static const struct pci_device_id ninja32[] = { + { 0x10FC, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0x8008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { 0x1145, 0xf02C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, { }, }; diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index f8b3ffc8ae9..c2e6fb9f2ef 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -39,9 +39,11 @@ #define RB500_CF_MAXPORTS 1 #define RB500_CF_IO_DELAY 400 -#define RB500_CF_REG_CMD 0x0800 +#define RB500_CF_REG_BASE 0x0800 +#define RB500_CF_REG_ERR 0x080D #define RB500_CF_REG_CTRL 0x080E -#define RB500_CF_REG_DATA 0x0C00 +/* 32bit buffered data register offset */ +#define RB500_CF_REG_DBUF32 0x0C00 struct rb532_cf_info { void __iomem *iobase; @@ -72,11 +74,12 @@ static void rb532_pata_exec_command(struct ata_port *ap, rb532_pata_finish_io(ap); } -static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, +static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data) { struct ata_port *ap = adev->link->ap; void __iomem *ioaddr = ap->ioaddr.data_addr; + int retlen = buflen; if (write_data) { for (; buflen > 0; buflen--, buf++) @@ -87,6 +90,7 @@ static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf, } rb532_pata_finish_io(adev->link->ap); + return retlen; } static void rb532_pata_freeze(struct ata_port *ap) @@ -146,13 +150,14 @@ static void rb532_pata_setup_ports(struct ata_host *ah) ap->pio_mask = 0x1f; /* PIO4 */ ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO; - ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_CMD; + ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE; ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL; ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL; ata_sff_std_ports(&ap->ioaddr); - ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA; + ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DBUF32; + ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR; } static __devinit int rb532_pata_driver_probe(struct platform_device *pdev) diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index d3423661175..e4be55e047f 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -56,7 +56,6 @@ static const struct sis_laptop sis_laptop[] = { { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ { 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */ { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */ - { 0x5513, 0x1039, 0x5513 }, /* Targa Visionary 1000 */ /* end marker */ { 0, } }; diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c index 615412364e9..6b969f8c684 100644 --- a/drivers/atm/horizon.c +++ b/drivers/atm/horizon.c @@ -2705,7 +2705,7 @@ static int __devinit hrz_probe(struct pci_dev *pci_dev, const struct pci_device_ /* XXX DEV_LABEL is a guess */ if (!request_region(iobase, HRZ_IO_EXTENT, DEV_LABEL)) { - return -EINVAL; + err = -EINVAL; goto out_disable; } diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index f20bf359b84..dc7a8c352da 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -302,7 +302,7 @@ static struct kobj_type kobj_pkt_type_wqueue = { static void pkt_sysfs_dev_new(struct pktcdvd_device *pd) { if (class_pktcdvd) { - pd->dev = device_create(class_pktcdvd, NULL, pd->pkt_dev, NULL, + pd->dev = device_create(class_pktcdvd, NULL, MKDEV(0, 0), NULL, "%s", pd->name); if (IS_ERR(pd->dev)) pd->dev = NULL; @@ -2790,7 +2790,7 @@ static int pkt_new_dev(struct pktcdvd_device *pd, dev_t dev) return 0; out_mem: - blkdev_put(bdev, FMODE_READ|FMODE_WRITE); + blkdev_put(bdev, FMODE_READ | FMODE_NDELAY); /* This is safe: open() is still holding a reference. */ module_put(THIS_MODULE); return ret; @@ -2975,7 +2975,7 @@ static int pkt_remove_dev(dev_t pkt_dev) pkt_debugfs_dev_remove(pd); pkt_sysfs_dev_remove(pd); - blkdev_put(pd->bdev, FMODE_READ|FMODE_WRITE); + blkdev_put(pd->bdev, FMODE_READ | FMODE_NDELAY); remove_proc_entry(pd->name, pkt_proc); DPRINTK(DRIVER_NAME": writer %s unmapped\n", pd->name); diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c index ecab9e67d47..29e1dfafb7c 100644 --- a/drivers/block/xsysace.c +++ b/drivers/block/xsysace.c @@ -194,7 +194,7 @@ struct ace_device { int in_irq; /* Details of hardware device */ - unsigned long physaddr; + resource_size_t physaddr; void __iomem *baseaddr; int irq; int bus_width; /* 0 := 8 bit; 1 := 16 bit */ @@ -628,8 +628,8 @@ static void ace_fsm_dostate(struct ace_device *ace) /* Okay, it's a data request, set it up for transfer */ dev_dbg(ace->dev, - "request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n", - req->sector, req->hard_nr_sectors, + "request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n", + (unsigned long long) req->sector, req->hard_nr_sectors, req->current_nr_sectors, rq_data_dir(req)); ace->req = req; @@ -935,7 +935,8 @@ static int __devinit ace_setup(struct ace_device *ace) int rc; dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace); - dev_dbg(ace->dev, "physaddr=0x%lx irq=%i\n", ace->physaddr, ace->irq); + dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n", + (unsigned long long)ace->physaddr, ace->irq); spin_lock_init(&ace->lock); init_completion(&ace->id_completion); @@ -1017,8 +1018,8 @@ static int __devinit ace_setup(struct ace_device *ace) /* Print the identification */ dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n", (version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff); - dev_dbg(ace->dev, "physaddr 0x%lx, mapped to 0x%p, irq=%i\n", - ace->physaddr, ace->baseaddr, ace->irq); + dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n", + (unsigned long long) ace->physaddr, ace->baseaddr, ace->irq); ace->media_change = 1; ace_revalidate_disk(ace->gd); @@ -1035,8 +1036,8 @@ err_alloc_disk: err_blk_initq: iounmap(ace->baseaddr); err_ioremap: - dev_info(ace->dev, "xsysace: error initializing device at 0x%lx\n", - ace->physaddr); + dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n", + (unsigned long long) ace->physaddr); return -ENOMEM; } @@ -1059,7 +1060,7 @@ static void __devexit ace_teardown(struct ace_device *ace) } static int __devinit -ace_alloc(struct device *dev, int id, unsigned long physaddr, +ace_alloc(struct device *dev, int id, resource_size_t physaddr, int irq, int bus_width) { struct ace_device *ace; @@ -1119,7 +1120,7 @@ static void __devexit ace_free(struct device *dev) static int __devinit ace_probe(struct platform_device *dev) { - unsigned long physaddr = 0; + resource_size_t physaddr = 0; int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */ int id = dev->id; int irq = NO_IRQ; @@ -1165,7 +1166,7 @@ static int __devinit ace_of_probe(struct of_device *op, const struct of_device_id *match) { struct resource res; - unsigned long physaddr; + resource_size_t physaddr; const u32 *id; int irq, bus_width, rc; diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index d16b02423d6..7d2e91cccb1 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -2081,10 +2081,6 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf, if (!q) return -ENXIO; - rq = blk_get_request(q, READ, GFP_KERNEL); - if (!rq) - return -ENOMEM; - cdi->last_sense = 0; while (nframes) { @@ -2096,9 +2092,17 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf, len = nr * CD_FRAMESIZE_RAW; + rq = blk_get_request(q, READ, GFP_KERNEL); + if (!rq) { + ret = -ENOMEM; + break; + } + ret = blk_rq_map_user(q, rq, NULL, ubuf, len, GFP_KERNEL); - if (ret) + if (ret) { + blk_put_request(rq); break; + } rq->cmd[0] = GPCMD_READ_CD; rq->cmd[1] = 1 << 2; @@ -2124,6 +2128,7 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf, if (blk_rq_unmap_user(bio)) ret = -EFAULT; + blk_put_request(rq); if (ret) break; @@ -2133,7 +2138,6 @@ static int cdrom_read_cdda_bpc(struct cdrom_device_info *cdi, __u8 __user *ubuf, ubuf += len; } - blk_put_request(rq); return ret; } diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index 0f004b65ec0..03f95ec08f5 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -27,7 +27,7 @@ static int uninorth_rev; static int is_u3; -static char __devinitdata *aperture = NULL; +static char *aperture = NULL; static int uninorth_fetch_size(void) { diff --git a/drivers/char/cp437.uni b/drivers/char/cp437.uni index 1f06889a96b..bc6163484f6 100644 --- a/drivers/char/cp437.uni +++ b/drivers/char/cp437.uni @@ -27,7 +27,7 @@ 0x0c U+2640 0x0d U+266a 0x0e U+266b -0x0f U+263c +0x0f U+263c U+00a4 0x10 U+25b6 U+25ba 0x11 U+25c0 U+25c4 0x12 U+2195 @@ -55,7 +55,7 @@ 0x24 U+0024 0x25 U+0025 0x26 U+0026 -0x27 U+0027 +0x27 U+0027 U+00b4 0x28 U+0028 0x29 U+0029 0x2a U+002a @@ -84,7 +84,7 @@ 0x41 U+0041 U+00c0 U+00c1 U+00c2 U+00c3 0x42 U+0042 0x43 U+0043 U+00a9 -0x44 U+0044 +0x44 U+0044 U+00d0 0x45 U+0045 U+00c8 U+00ca U+00cb 0x46 U+0046 0x47 U+0047 @@ -140,7 +140,7 @@ 0x79 U+0079 U+00fd 0x7a U+007a 0x7b U+007b -0x7c U+007c U+00a5 +0x7c U+007c U+00a6 0x7d U+007d 0x7e U+007e # @@ -263,10 +263,10 @@ 0xe8 U+03a6 U+00d8 0xe9 U+0398 0xea U+03a9 U+2126 -0xeb U+03b4 +0xeb U+03b4 U+00f0 0xec U+221e 0xed U+03c6 U+00f8 -0xee U+03b5 +0xee U+03b5 U+2208 0xef U+2229 0xf0 U+2261 0xf1 U+00b1 diff --git a/drivers/char/ds1620.c b/drivers/char/ds1620.c index 74e9cd81b5b..61f0146e215 100644 --- a/drivers/char/ds1620.c +++ b/drivers/char/ds1620.c @@ -43,52 +43,51 @@ static const char *fan_state[] = { "off", "on", "on (hardwired)" }; * chance that the WaveArtist driver could touch these bits to * enable or disable the speaker. */ -extern spinlock_t gpio_lock; extern unsigned int system_rev; static inline void netwinder_ds1620_set_clk(int clk) { - gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0); + nw_gpio_modify_op(GPIO_DSCLK, clk ? GPIO_DSCLK : 0); } static inline void netwinder_ds1620_set_data(int dat) { - gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0); + nw_gpio_modify_op(GPIO_DATA, dat ? GPIO_DATA : 0); } static inline int netwinder_ds1620_get_data(void) { - return gpio_read() & GPIO_DATA; + return nw_gpio_read() & GPIO_DATA; } static inline void netwinder_ds1620_set_data_dir(int dir) { - gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0); + nw_gpio_modify_io(GPIO_DATA, dir ? GPIO_DATA : 0); } static inline void netwinder_ds1620_reset(void) { - cpld_modify(CPLD_DS_ENABLE, 0); - cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE); + nw_cpld_modify(CPLD_DS_ENABLE, 0); + nw_cpld_modify(CPLD_DS_ENABLE, CPLD_DS_ENABLE); } static inline void netwinder_lock(unsigned long *flags) { - spin_lock_irqsave(&gpio_lock, *flags); + spin_lock_irqsave(&nw_gpio_lock, *flags); } static inline void netwinder_unlock(unsigned long *flags) { - spin_unlock_irqrestore(&gpio_lock, *flags); + spin_unlock_irqrestore(&nw_gpio_lock, *flags); } static inline void netwinder_set_fan(int i) { unsigned long flags; - spin_lock_irqsave(&gpio_lock, flags); - gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0); + spin_unlock_irqrestore(&nw_gpio_lock, flags); } static inline int netwinder_get_fan(void) @@ -96,7 +95,7 @@ static inline int netwinder_get_fan(void) if ((system_rev & 0xf000) == 0x4000) return FAN_ALWAYS_ON; - return (gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF; + return (nw_gpio_read() & GPIO_FAN) ? FAN_ON : FAN_OFF; } /* diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 44e5d60f517..4b10770fa93 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -3739,7 +3739,7 @@ static int stli_getbrdnr(void) * do is go probing around in the usual places hoping we can find it. */ -static int stli_findeisabrds(void) +static int __init stli_findeisabrds(void) { struct stlibrd *brdp; unsigned int iobase, eid, i; @@ -3935,7 +3935,7 @@ static struct stlibrd *stli_allocbrd(void) * can find. */ -static int stli_initbrds(void) +static int __init stli_initbrds(void) { struct stlibrd *brdp, *nxtbrdp; struct stlconf conf; diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c index 006be92ee3f..8c7df5ba088 100644 --- a/drivers/char/nwflash.c +++ b/drivers/char/nwflash.c @@ -58,8 +58,6 @@ static volatile unsigned char *FLASH_BASE; static int gbFlashSize = KFLASH_SIZE; static DEFINE_MUTEX(nwflash_mutex); -extern spinlock_t gpio_lock; - static int get_flash_id(void) { volatile unsigned int c1, c2; @@ -616,9 +614,9 @@ static void kick_open(void) * we want to write a bit pattern XXX1 to Xilinx to enable * the write gate, which will be open for about the next 2ms. */ - spin_lock_irqsave(&gpio_lock, flags); - cpld_modify(1, 1); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE); + spin_unlock_irqrestore(&nw_gpio_lock, flags); /* * let the ISA bus to catch on... diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c index 3b23270eaa6..a8f15e6be59 100644 --- a/drivers/char/serial167.c +++ b/drivers/char/serial167.c @@ -418,7 +418,7 @@ static irqreturn_t cd2401_rxerr_interrupt(int irq, void *dev_id) TTY_OVERRUN); /* If the flip buffer itself is - overflowing, we still loose + overflowing, we still lose the next incoming character. */ if (tty_buffer_request_room(tty, 1) != diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 59f472143f0..1412a8d1e58 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1795,12 +1795,15 @@ retry_open: } #endif if (device == MKDEV(TTYAUX_MAJOR, 1)) { - driver = tty_driver_kref_get(console_device(&index)); - if (driver) { - /* Don't let /dev/console block */ - filp->f_flags |= O_NONBLOCK; - noctty = 1; - goto got_driver; + struct tty_driver *console_driver = console_device(&index); + if (console_driver) { + driver = tty_driver_kref_get(console_driver); + if (driver) { + /* Don't let /dev/console block */ + filp->f_flags |= O_NONBLOCK; + noctty = 1; + goto got_driver; + } } mutex_unlock(&tty_mutex); return -ENODEV; diff --git a/drivers/char/vt.c b/drivers/char/vt.c index a5af6072e2b..008176edbd6 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -2274,7 +2274,7 @@ rescan_last_byte: continue; /* nothing to display */ } /* Glyph not found */ - if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) { + if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) { /* In legacy mode use the glyph we get by a 1:1 mapping. This would make absolutely no sense with Unicode in mind, but do this for ASCII characters since a font may lack diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index ed132fe55d3..d1613194909 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -626,7 +626,7 @@ static int __devinit hwicap_setup(struct device *dev, int id, if (!request_mem_region(drvdata->mem_start, drvdata->mem_size, DRIVER_NAME)) { dev_err(dev, "Couldn't lock memory region at %Lx\n", - regs_res->start); + (unsigned long long) regs_res->start); retval = -EBUSY; goto failed1; } @@ -645,9 +645,10 @@ static int __devinit hwicap_setup(struct device *dev, int id, mutex_init(&drvdata->sem); drvdata->is_open = 0; - dev_info(dev, "ioremap %lx to %p with size %Lx\n", - (unsigned long int)drvdata->mem_start, - drvdata->base_address, drvdata->mem_size); + dev_info(dev, "ioremap %llx to %p with size %llx\n", + (unsigned long long) drvdata->mem_start, + drvdata->base_address, + (unsigned long long) drvdata->mem_size); cdev_init(&drvdata->cdev, &hwicap_fops); drvdata->cdev.owner = THIS_MODULE; diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c index b6ad3ac5916..24607669a52 100644 --- a/drivers/crypto/talitos.c +++ b/drivers/crypto/talitos.c @@ -1357,7 +1357,7 @@ static int hw_supports(struct device *dev, __be32 desc_hdr_template) return ret; } -static int __devexit talitos_remove(struct of_device *ofdev) +static int talitos_remove(struct of_device *ofdev) { struct device *dev = &ofdev->dev; struct talitos_private *priv = dev_get_drvdata(dev); @@ -1622,7 +1622,7 @@ static struct of_platform_driver talitos_driver = { .name = "talitos", .match_table = talitos_match, .probe = talitos_probe, - .remove = __devexit_p(talitos_remove), + .remove = talitos_remove, }; static int __init talitos_init(void) diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c index e43bdc43a1b..ebb037b7875 100644 --- a/drivers/edac/i82875p_edac.c +++ b/drivers/edac/i82875p_edac.c @@ -182,8 +182,6 @@ static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has * already registered driver */ -static int i82875p_registered = 1; - static struct edac_pci_ctl_info *i82875p_pci; static void i82875p_get_error_info(struct mem_ctl_info *mci, @@ -295,6 +293,7 @@ static int i82875p_setup_overfl_dev(struct pci_dev *pdev, "%s(): pci_bus_add_device() Failed\n", __func__); } + pci_bus_assign_resources(dev->bus); } *ovrfl_pdev = dev; @@ -409,6 +408,9 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx) goto fail0; } + /* Keeps mci available after edac_mc_del_mc() till edac_mc_free() */ + kobject_get(&mci->edac_mci_kobj); + debugf3("%s(): init mci\n", __func__); mci->dev = &pdev->dev; mci->mtype_cap = MEM_FLAG_DDR; @@ -451,6 +453,7 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx) return 0; fail1: + kobject_put(&mci->edac_mci_kobj); edac_mc_free(mci); fail0: @@ -578,12 +581,11 @@ static void __exit i82875p_exit(void) { debugf3("%s()\n", __func__); + i82875p_remove_one(mci_pdev); + pci_dev_put(mci_pdev); + pci_unregister_driver(&i82875p_driver); - if (!i82875p_registered) { - i82875p_remove_one(mci_pdev); - pci_dev_put(mci_pdev); - } } module_init(i82875p_init); diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 46610b09041..ab9c01e462e 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -974,6 +974,7 @@ at_context_queue_packet(struct context *ctx, struct fw_packet *packet) packet->ack = RCODE_SEND_ERROR; return -1; } + packet->payload_bus = payload_bus; d[2].req_count = cpu_to_le16(packet->payload_length); d[2].data_address = cpu_to_le32(payload_bus); @@ -1025,7 +1026,6 @@ static int handle_at_packet(struct context *context, struct driver_data *driver_data; struct fw_packet *packet; struct fw_ohci *ohci = context->ohci; - dma_addr_t payload_bus; int evt; if (last->transfer_status == 0) @@ -1038,9 +1038,8 @@ static int handle_at_packet(struct context *context, /* This packet was cancelled, just continue. */ return 1; - payload_bus = le32_to_cpu(last->data_address); - if (payload_bus != 0) - dma_unmap_single(ohci->card.device, payload_bus, + if (packet->payload_bus) + dma_unmap_single(ohci->card.device, packet->payload_bus, packet->payload_length, DMA_TO_DEVICE); evt = le16_to_cpu(last->transfer_status) & 0x1f; @@ -1697,6 +1696,10 @@ static int ohci_cancel_packet(struct fw_card *card, struct fw_packet *packet) if (packet->ack != 0) goto out; + if (packet->payload_bus) + dma_unmap_single(ohci->card.device, packet->payload_bus, + packet->payload_length, DMA_TO_DEVICE); + log_ar_at_event('T', packet->speed, packet->header, 0x20); driver_data->packet = NULL; packet->ack = RCODE_CANCELLED; diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index 97df6dac3a8..e54403ee59e 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -372,6 +372,11 @@ static const struct { }, /* iPod mini */ { .firmware_revision = 0x0a2700, + .model = 0x000022, + .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, + }, + /* iPod mini */ { + .firmware_revision = 0x0a2700, .model = 0x000023, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c index 022ac4fabb6..2884f876397 100644 --- a/drivers/firewire/fw-transaction.c +++ b/drivers/firewire/fw-transaction.c @@ -207,6 +207,7 @@ fw_fill_request(struct fw_packet *packet, int tcode, int tlabel, packet->speed = speed; packet->generation = generation; packet->ack = 0; + packet->payload_bus = 0; } /** @@ -581,6 +582,8 @@ fw_fill_response(struct fw_packet *response, u32 *request_header, BUG(); return; } + + response->payload_bus = 0; } EXPORT_SYMBOL(fw_fill_response); diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index aed7dbb17cd..839466f0a79 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -27,6 +27,7 @@ #include <linux/list.h> #include <linux/spinlock_types.h> #include <linux/timer.h> +#include <linux/types.h> #include <linux/workqueue.h> #define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4) @@ -153,6 +154,7 @@ struct fw_packet { size_t header_length; void *payload; size_t payload_length; + dma_addr_t payload_bus; u32 timestamp; /* diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 3ab1e9cc469..996097acb5e 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -305,6 +305,8 @@ static void drm_cleanup(struct drm_device * dev) return; } + drm_vblank_cleanup(dev); + drm_lastclose(dev); if (drm_core_has_MTRR(dev) && drm_core_has_AGP(dev) && diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 15c8dabc3e9..1e787f894b3 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -94,7 +94,7 @@ static void vblank_disable_fn(unsigned long arg) } } -static void drm_vblank_cleanup(struct drm_device *dev) +void drm_vblank_cleanup(struct drm_device *dev) { /* Bail if the driver didn't call drm_vblank_init() */ if (dev->num_crtcs == 0) @@ -278,8 +278,6 @@ int drm_irq_uninstall(struct drm_device * dev) free_irq(dev->pdev->irq, dev); - drm_vblank_cleanup(dev); - return 0; } EXPORT_SYMBOL(drm_irq_uninstall); diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 0d215e38606..553dd4bc307 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -847,15 +847,23 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) * and the registers being closely associated. * * According to chipset errata, on the 965GM, MSI interrupts may - * be lost or delayed + * be lost or delayed, but we use them anyways to avoid + * stuck interrupts on some machines. */ - if (!IS_I945G(dev) && !IS_I945GM(dev) && !IS_I965GM(dev)) + if (!IS_I945G(dev) && !IS_I945GM(dev)) pci_enable_msi(dev->pdev); intel_opregion_init(dev); spin_lock_init(&dev_priv->user_irq_lock); + ret = drm_vblank_init(dev, I915_NUM_PIPE); + + if (ret) { + (void) i915_driver_unload(dev); + return ret; + } + return ret; } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index ef1c0b8f8d0..adc972cc6bf 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -47,6 +47,8 @@ enum pipe { PIPE_B, }; +#define I915_NUM_PIPE 2 + /* Interface history: * * 1.1: Original. @@ -132,6 +134,7 @@ typedef struct drm_i915_private { int user_irq_refcount; /** Cached value of IMR to avoid reads in updating the bitfield */ u32 irq_mask_reg; + u32 pipestat[2]; int tex_lru_log_granularity; int allow_batchbuffer; @@ -147,6 +150,7 @@ typedef struct drm_i915_private { u32 saveDSPBCNTR; u32 saveDSPARB; u32 saveRENDERSTANDBY; + u32 saveHWS; u32 savePIPEACONF; u32 savePIPEBCONF; u32 savePIPEASRC; @@ -240,6 +244,10 @@ typedef struct drm_i915_private { * List of objects currently involved in rendering from the * ringbuffer. * + * Includes buffers having the contents of their GPU caches + * flushed, not necessarily primitives. last_rendering_seqno + * represents when the rendering involved will be completed. + * * A reference is held on the buffer while on this list. */ struct list_head active_list; @@ -249,6 +257,8 @@ typedef struct drm_i915_private { * still have a write_domain which needs to be flushed before * unbinding. * + * last_rendering_seqno is 0 while an object is in this list. + * * A reference is held on the buffer while on this list. */ struct list_head flushing_list; @@ -257,6 +267,8 @@ typedef struct drm_i915_private { * LRU list of objects which are not in the ringbuffer and * are ready to unbind, but are still in the GTT. * + * last_rendering_seqno is 0 while an object is in this list. + * * A reference is not held on the buffer while on this list, * as merely being GTT-bound shouldn't prevent its being * freed, and we'll pull it off the list in the free path. @@ -367,8 +379,8 @@ struct drm_i915_gem_object { uint32_t agp_type; /** - * Flagging of which individual pages are valid in GEM_DOMAIN_CPU when - * GEM_DOMAIN_CPU is not in the object's read domain. + * If present, while GEM_DOMAIN_CPU is in the read domain this array + * flags which individual pages are valid. */ uint8_t *page_cpu_valid; }; @@ -390,9 +402,6 @@ struct drm_i915_gem_request { /** Time at which this request was emitted, in jiffies. */ unsigned long emitted_jiffies; - /** Cache domains that were flushed at the start of the request. */ - uint32_t flush_domains; - struct list_head list; }; @@ -446,6 +455,13 @@ extern int i915_vblank_swap(struct drm_device *dev, void *data, struct drm_file *file_priv); extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask); +void +i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask); + +void +i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask); + + /* i915_mem.c */ extern int i915_mem_alloc(struct drm_device *dev, void *data, struct drm_file *file_priv); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 6b4a2bd2064..ad672d85482 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -31,21 +31,23 @@ #include "i915_drv.h" #include <linux/swap.h> -static int -i915_gem_object_set_domain(struct drm_gem_object *obj, - uint32_t read_domains, - uint32_t write_domain); -static int -i915_gem_object_set_domain_range(struct drm_gem_object *obj, - uint64_t offset, - uint64_t size, - uint32_t read_domains, - uint32_t write_domain); -static int -i915_gem_set_domain(struct drm_gem_object *obj, - struct drm_file *file_priv, - uint32_t read_domains, - uint32_t write_domain); +#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) + +static void +i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, + uint32_t read_domains, + uint32_t write_domain); +static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj); +static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj); +static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj); +static int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, + int write); +static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, + int write); +static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, + uint64_t offset, + uint64_t size); +static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj); static int i915_gem_object_get_page_list(struct drm_gem_object *obj); static void i915_gem_object_free_page_list(struct drm_gem_object *obj); static int i915_gem_object_wait_rendering(struct drm_gem_object *obj); @@ -83,20 +85,14 @@ int i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { - drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_get_aperture *args = data; - struct drm_i915_gem_object *obj_priv; if (!(dev->driver->driver_features & DRIVER_GEM)) return -ENODEV; args->aper_size = dev->gtt_total; - args->aper_available_size = args->aper_size; - - list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) { - if (obj_priv->pin_count > 0) - args->aper_available_size -= obj_priv->obj->size; - } + args->aper_available_size = (args->aper_size - + atomic_read(&dev->pin_memory)); return 0; } @@ -166,8 +162,8 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data, mutex_lock(&dev->struct_mutex); - ret = i915_gem_object_set_domain_range(obj, args->offset, args->size, - I915_GEM_DOMAIN_CPU, 0); + ret = i915_gem_object_set_cpu_read_domain_range(obj, args->offset, + args->size); if (ret != 0) { drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); @@ -264,8 +260,7 @@ i915_gem_gtt_pwrite(struct drm_device *dev, struct drm_gem_object *obj, mutex_unlock(&dev->struct_mutex); return ret; } - ret = i915_gem_set_domain(obj, file_priv, - I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT); + ret = i915_gem_object_set_to_gtt_domain(obj, 1); if (ret) goto fail; @@ -324,8 +319,7 @@ i915_gem_shmem_pwrite(struct drm_device *dev, struct drm_gem_object *obj, mutex_lock(&dev->struct_mutex); - ret = i915_gem_set_domain(obj, file_priv, - I915_GEM_DOMAIN_CPU, I915_GEM_DOMAIN_CPU); + ret = i915_gem_object_set_to_cpu_domain(obj, 1); if (ret) { mutex_unlock(&dev->struct_mutex); return ret; @@ -401,7 +395,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, } /** - * Called when user space prepares to use an object + * Called when user space prepares to use an object with the CPU, either + * through the mmap ioctl's mapping or a GTT mapping. */ int i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, @@ -409,11 +404,26 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, { struct drm_i915_gem_set_domain *args = data; struct drm_gem_object *obj; + uint32_t read_domains = args->read_domains; + uint32_t write_domain = args->write_domain; int ret; if (!(dev->driver->driver_features & DRIVER_GEM)) return -ENODEV; + /* Only handle setting domains to types used by the CPU. */ + if (write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) + return -EINVAL; + + if (read_domains & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) + return -EINVAL; + + /* Having something in the write domain implies it's in the read + * domain, and only that read domain. Enforce that in the request. + */ + if (write_domain != 0 && read_domains != write_domain) + return -EINVAL; + obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (obj == NULL) return -EBADF; @@ -421,10 +431,21 @@ i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, mutex_lock(&dev->struct_mutex); #if WATCH_BUF DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n", - obj, obj->size, args->read_domains, args->write_domain); + obj, obj->size, read_domains, write_domain); #endif - ret = i915_gem_set_domain(obj, file_priv, - args->read_domains, args->write_domain); + if (read_domains & I915_GEM_DOMAIN_GTT) { + ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0); + + /* Silently promote "you're not bound, there was nothing to do" + * to success, since the client was just asking us to + * make sure everything was done. + */ + if (ret == -EINVAL) + ret = 0; + } else { + ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0); + } + drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return ret; @@ -459,10 +480,9 @@ i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, obj_priv = obj->driver_private; /* Pinned buffers may be scanout, so flush the cache */ - if ((obj->write_domain & I915_GEM_DOMAIN_CPU) && obj_priv->pin_count) { - i915_gem_clflush_object(obj); - drm_agp_chipset_flush(dev); - } + if (obj_priv->pin_count) + i915_gem_object_flush_cpu_write_domain(obj); + drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return ret; @@ -536,7 +556,7 @@ i915_gem_object_free_page_list(struct drm_gem_object *obj) } static void -i915_gem_object_move_to_active(struct drm_gem_object *obj) +i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno) { struct drm_device *dev = obj->dev; drm_i915_private_t *dev_priv = dev->dev_private; @@ -550,8 +570,20 @@ i915_gem_object_move_to_active(struct drm_gem_object *obj) /* Move from whatever list we were on to the tail of execution. */ list_move_tail(&obj_priv->list, &dev_priv->mm.active_list); + obj_priv->last_rendering_seqno = seqno; } +static void +i915_gem_object_move_to_flushing(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + BUG_ON(!obj_priv->active); + list_move_tail(&obj_priv->list, &dev_priv->mm.flushing_list); + obj_priv->last_rendering_seqno = 0; +} static void i915_gem_object_move_to_inactive(struct drm_gem_object *obj) @@ -566,6 +598,7 @@ i915_gem_object_move_to_inactive(struct drm_gem_object *obj) else list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list); + obj_priv->last_rendering_seqno = 0; if (obj_priv->active) { obj_priv->active = 0; drm_gem_object_unreference(obj); @@ -614,10 +647,28 @@ i915_add_request(struct drm_device *dev, uint32_t flush_domains) request->seqno = seqno; request->emitted_jiffies = jiffies; - request->flush_domains = flush_domains; was_empty = list_empty(&dev_priv->mm.request_list); list_add_tail(&request->list, &dev_priv->mm.request_list); + /* Associate any objects on the flushing list matching the write + * domain we're flushing with our flush. + */ + if (flush_domains != 0) { + struct drm_i915_gem_object *obj_priv, *next; + + list_for_each_entry_safe(obj_priv, next, + &dev_priv->mm.flushing_list, list) { + struct drm_gem_object *obj = obj_priv->obj; + + if ((obj->write_domain & flush_domains) == + obj->write_domain) { + obj->write_domain = 0; + i915_gem_object_move_to_active(obj, seqno); + } + } + + } + if (was_empty && !dev_priv->mm.suspended) schedule_delayed_work(&dev_priv->mm.retire_work, HZ); return seqno; @@ -680,30 +731,10 @@ i915_gem_retire_request(struct drm_device *dev, __func__, request->seqno, obj); #endif - if (obj->write_domain != 0) { - list_move_tail(&obj_priv->list, - &dev_priv->mm.flushing_list); - } else { + if (obj->write_domain != 0) + i915_gem_object_move_to_flushing(obj); + else i915_gem_object_move_to_inactive(obj); - } - } - - if (request->flush_domains != 0) { - struct drm_i915_gem_object *obj_priv, *next; - - /* Clear the write domain and activity from any buffers - * that are just waiting for a flush matching the one retired. - */ - list_for_each_entry_safe(obj_priv, next, - &dev_priv->mm.flushing_list, list) { - struct drm_gem_object *obj = obj_priv->obj; - - if (obj->write_domain & request->flush_domains) { - obj->write_domain = 0; - i915_gem_object_move_to_inactive(obj); - } - } - } } @@ -896,25 +927,10 @@ i915_gem_object_wait_rendering(struct drm_gem_object *obj) struct drm_i915_gem_object *obj_priv = obj->driver_private; int ret; - /* If there are writes queued to the buffer, flush and - * create a new seqno to wait for. + /* This function only exists to support waiting for existing rendering, + * not for emitting required flushes. */ - if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) { - uint32_t write_domain = obj->write_domain; -#if WATCH_BUF - DRM_INFO("%s: flushing object %p from write domain %08x\n", - __func__, obj, write_domain); -#endif - i915_gem_flush(dev, 0, write_domain); - - i915_gem_object_move_to_active(obj); - obj_priv->last_rendering_seqno = i915_add_request(dev, - write_domain); - BUG_ON(obj_priv->last_rendering_seqno == 0); -#if WATCH_LRU - DRM_INFO("%s: flush moves to exec list %p\n", __func__, obj); -#endif - } + BUG_ON((obj->write_domain & I915_GEM_GPU_DOMAINS) != 0); /* If there is rendering queued on the buffer being evicted, wait for * it. @@ -954,24 +970,16 @@ i915_gem_object_unbind(struct drm_gem_object *obj) return -EINVAL; } - /* Wait for any rendering to complete - */ - ret = i915_gem_object_wait_rendering(obj); - if (ret) { - DRM_ERROR("wait_rendering failed: %d\n", ret); - return ret; - } - /* Move the object to the CPU domain to ensure that * any possible CPU writes while it's not in the GTT * are flushed when we go to remap it. This will * also ensure that all pending GPU writes are finished * before we unbind. */ - ret = i915_gem_object_set_domain(obj, I915_GEM_DOMAIN_CPU, - I915_GEM_DOMAIN_CPU); + ret = i915_gem_object_set_to_cpu_domain(obj, 1); if (ret) { - DRM_ERROR("set_domain failed: %d\n", ret); + if (ret != -ERESTARTSYS) + DRM_ERROR("set_domain failed: %d\n", ret); return ret; } @@ -1087,6 +1095,21 @@ i915_gem_evict_something(struct drm_device *dev) } static int +i915_gem_evict_everything(struct drm_device *dev) +{ + int ret; + + for (;;) { + ret = i915_gem_evict_something(dev); + if (ret != 0) + break; + } + if (ret == -ENOMEM) + return 0; + return ret; +} + +static int i915_gem_object_get_page_list(struct drm_gem_object *obj) { struct drm_i915_gem_object *obj_priv = obj->driver_private; @@ -1172,7 +1195,8 @@ i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) ret = i915_gem_evict_something(dev); if (ret != 0) { - DRM_ERROR("Failed to evict a buffer %d\n", ret); + if (ret != -ERESTARTSYS) + DRM_ERROR("Failed to evict a buffer %d\n", ret); return ret; } goto search_free; @@ -1232,6 +1256,143 @@ i915_gem_clflush_object(struct drm_gem_object *obj) drm_clflush_pages(obj_priv->page_list, obj->size / PAGE_SIZE); } +/** Flushes any GPU write domain for the object if it's dirty. */ +static void +i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + uint32_t seqno; + + if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0) + return; + + /* Queue the GPU write cache flushing we need. */ + i915_gem_flush(dev, 0, obj->write_domain); + seqno = i915_add_request(dev, obj->write_domain); + obj->write_domain = 0; + i915_gem_object_move_to_active(obj, seqno); +} + +/** Flushes the GTT write domain for the object if it's dirty. */ +static void +i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj) +{ + if (obj->write_domain != I915_GEM_DOMAIN_GTT) + return; + + /* No actual flushing is required for the GTT write domain. Writes + * to it immediately go to main memory as far as we know, so there's + * no chipset flush. It also doesn't land in render cache. + */ + obj->write_domain = 0; +} + +/** Flushes the CPU write domain for the object if it's dirty. */ +static void +i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + + if (obj->write_domain != I915_GEM_DOMAIN_CPU) + return; + + i915_gem_clflush_object(obj); + drm_agp_chipset_flush(dev); + obj->write_domain = 0; +} + +/** + * Moves a single object to the GTT read, and possibly write domain. + * + * This function returns when the move is complete, including waiting on + * flushes to occur. + */ +static int +i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int ret; + + /* Not valid to be called on unbound objects. */ + if (obj_priv->gtt_space == NULL) + return -EINVAL; + + i915_gem_object_flush_gpu_write_domain(obj); + /* Wait on any GPU rendering and flushing to occur. */ + ret = i915_gem_object_wait_rendering(obj); + if (ret != 0) + return ret; + + /* If we're writing through the GTT domain, then CPU and GPU caches + * will need to be invalidated at next use. + */ + if (write) + obj->read_domains &= I915_GEM_DOMAIN_GTT; + + i915_gem_object_flush_cpu_write_domain(obj); + + /* It should now be out of any other write domains, and we can update + * the domain values for our changes. + */ + BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0); + obj->read_domains |= I915_GEM_DOMAIN_GTT; + if (write) { + obj->write_domain = I915_GEM_DOMAIN_GTT; + obj_priv->dirty = 1; + } + + return 0; +} + +/** + * Moves a single object to the CPU read, and possibly write domain. + * + * This function returns when the move is complete, including waiting on + * flushes to occur. + */ +static int +i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write) +{ + struct drm_device *dev = obj->dev; + int ret; + + i915_gem_object_flush_gpu_write_domain(obj); + /* Wait on any GPU rendering and flushing to occur. */ + ret = i915_gem_object_wait_rendering(obj); + if (ret != 0) + return ret; + + i915_gem_object_flush_gtt_write_domain(obj); + + /* If we have a partially-valid cache of the object in the CPU, + * finish invalidating it and free the per-page flags. + */ + i915_gem_object_set_to_full_cpu_read_domain(obj); + + /* Flush the CPU cache if it's still invalid. */ + if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) { + i915_gem_clflush_object(obj); + drm_agp_chipset_flush(dev); + + obj->read_domains |= I915_GEM_DOMAIN_CPU; + } + + /* It should now be out of any other write domains, and we can update + * the domain values for our changes. + */ + BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0); + + /* If we're writing through the CPU, then the GPU read domains will + * need to be invalidated at next use. + */ + if (write) { + obj->read_domains &= I915_GEM_DOMAIN_CPU; + obj->write_domain = I915_GEM_DOMAIN_CPU; + } + + return 0; +} + /* * Set the next domain for the specified object. This * may not actually perform the necessary flushing/invaliding though, @@ -1343,16 +1504,18 @@ i915_gem_clflush_object(struct drm_gem_object *obj) * MI_FLUSH * drm_agp_chipset_flush */ -static int -i915_gem_object_set_domain(struct drm_gem_object *obj, - uint32_t read_domains, - uint32_t write_domain) +static void +i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj, + uint32_t read_domains, + uint32_t write_domain) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; uint32_t invalidate_domains = 0; uint32_t flush_domains = 0; - int ret; + + BUG_ON(read_domains & I915_GEM_DOMAIN_CPU); + BUG_ON(write_domain == I915_GEM_DOMAIN_CPU); #if WATCH_BUF DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n", @@ -1389,34 +1552,11 @@ i915_gem_object_set_domain(struct drm_gem_object *obj, DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n", __func__, flush_domains, invalidate_domains); #endif - /* - * If we're invaliding the CPU cache and flushing a GPU cache, - * then pause for rendering so that the GPU caches will be - * flushed before the cpu cache is invalidated - */ - if ((invalidate_domains & I915_GEM_DOMAIN_CPU) && - (flush_domains & ~(I915_GEM_DOMAIN_CPU | - I915_GEM_DOMAIN_GTT))) { - ret = i915_gem_object_wait_rendering(obj); - if (ret) - return ret; - } i915_gem_clflush_object(obj); } if ((write_domain | flush_domains) != 0) obj->write_domain = write_domain; - - /* If we're invalidating the CPU domain, clear the per-page CPU - * domain list as well. - */ - if (obj_priv->page_cpu_valid != NULL && - (write_domain != 0 || - read_domains & I915_GEM_DOMAIN_CPU)) { - drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE, - DRM_MEM_DRIVER); - obj_priv->page_cpu_valid = NULL; - } obj->read_domains = read_domains; dev->invalidate_domains |= invalidate_domains; @@ -1427,47 +1567,94 @@ i915_gem_object_set_domain(struct drm_gem_object *obj, obj->read_domains, obj->write_domain, dev->invalidate_domains, dev->flush_domains); #endif - return 0; } /** - * Set the read/write domain on a range of the object. + * Moves the object from a partially CPU read to a full one. * - * Currently only implemented for CPU reads, otherwise drops to normal - * i915_gem_object_set_domain(). + * Note that this only resolves i915_gem_object_set_cpu_read_domain_range(), + * and doesn't handle transitioning from !(read_domains & I915_GEM_DOMAIN_CPU). */ -static int -i915_gem_object_set_domain_range(struct drm_gem_object *obj, - uint64_t offset, - uint64_t size, - uint32_t read_domains, - uint32_t write_domain) +static void +i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj) { + struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; - int ret, i; - if (obj->read_domains & I915_GEM_DOMAIN_CPU) - return 0; + if (!obj_priv->page_cpu_valid) + return; - if (read_domains != I915_GEM_DOMAIN_CPU || - write_domain != 0) - return i915_gem_object_set_domain(obj, - read_domains, write_domain); + /* If we're partially in the CPU read domain, finish moving it in. + */ + if (obj->read_domains & I915_GEM_DOMAIN_CPU) { + int i; - /* Wait on any GPU rendering to the object to be flushed. */ + for (i = 0; i <= (obj->size - 1) / PAGE_SIZE; i++) { + if (obj_priv->page_cpu_valid[i]) + continue; + drm_clflush_pages(obj_priv->page_list + i, 1); + } + drm_agp_chipset_flush(dev); + } + + /* Free the page_cpu_valid mappings which are now stale, whether + * or not we've got I915_GEM_DOMAIN_CPU. + */ + drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE, + DRM_MEM_DRIVER); + obj_priv->page_cpu_valid = NULL; +} + +/** + * Set the CPU read domain on a range of the object. + * + * The object ends up with I915_GEM_DOMAIN_CPU in its read flags although it's + * not entirely valid. The page_cpu_valid member of the object flags which + * pages have been flushed, and will be respected by + * i915_gem_object_set_to_cpu_domain() if it's called on to get a valid mapping + * of the whole object. + * + * This function returns when the move is complete, including waiting on + * flushes to occur. + */ +static int +i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, + uint64_t offset, uint64_t size) +{ + struct drm_i915_gem_object *obj_priv = obj->driver_private; + int i, ret; + + if (offset == 0 && size == obj->size) + return i915_gem_object_set_to_cpu_domain(obj, 0); + + i915_gem_object_flush_gpu_write_domain(obj); + /* Wait on any GPU rendering and flushing to occur. */ ret = i915_gem_object_wait_rendering(obj); - if (ret) + if (ret != 0) return ret; + i915_gem_object_flush_gtt_write_domain(obj); + /* If we're already fully in the CPU read domain, we're done. */ + if (obj_priv->page_cpu_valid == NULL && + (obj->read_domains & I915_GEM_DOMAIN_CPU) != 0) + return 0; + + /* Otherwise, create/clear the per-page CPU read domain flag if we're + * newly adding I915_GEM_DOMAIN_CPU + */ if (obj_priv->page_cpu_valid == NULL) { obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE, DRM_MEM_DRIVER); - } + if (obj_priv->page_cpu_valid == NULL) + return -ENOMEM; + } else if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) + memset(obj_priv->page_cpu_valid, 0, obj->size / PAGE_SIZE); /* Flush the cache on any pages that are still invalid from the CPU's * perspective. */ - for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; i++) { + for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; + i++) { if (obj_priv->page_cpu_valid[i]) continue; @@ -1476,39 +1663,14 @@ i915_gem_object_set_domain_range(struct drm_gem_object *obj, obj_priv->page_cpu_valid[i] = 1; } - return 0; -} - -/** - * Once all of the objects have been set in the proper domain, - * perform the necessary flush and invalidate operations. - * - * Returns the write domains flushed, for use in flush tracking. - */ -static uint32_t -i915_gem_dev_set_domain(struct drm_device *dev) -{ - uint32_t flush_domains = dev->flush_domains; - - /* - * Now that all the buffers are synced to the proper domains, - * flush and invalidate the collected domains + /* It should now be out of any other write domains, and we can update + * the domain values for our changes. */ - if (dev->invalidate_domains | dev->flush_domains) { -#if WATCH_EXEC - DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", - __func__, - dev->invalidate_domains, - dev->flush_domains); -#endif - i915_gem_flush(dev, - dev->invalidate_domains, - dev->flush_domains); - dev->invalidate_domains = 0; - dev->flush_domains = 0; - } + BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0); - return flush_domains; + obj->read_domains |= I915_GEM_DOMAIN_CPU; + + return 0; } /** @@ -1589,6 +1751,18 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, return -EINVAL; } + if (reloc.write_domain & I915_GEM_DOMAIN_CPU || + reloc.read_domains & I915_GEM_DOMAIN_CPU) { + DRM_ERROR("reloc with read/write CPU domains: " + "obj %p target %d offset %d " + "read %08x write %08x", + obj, reloc.target_handle, + (int) reloc.offset, + reloc.read_domains, + reloc.write_domain); + return -EINVAL; + } + if (reloc.write_domain && target_obj->pending_write_domain && reloc.write_domain != target_obj->pending_write_domain) { DRM_ERROR("Write domain conflict: " @@ -1629,19 +1803,11 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, continue; } - /* Now that we're going to actually write some data in, - * make sure that any rendering using this buffer's contents - * is completed. - */ - i915_gem_object_wait_rendering(obj); - - /* As we're writing through the gtt, flush - * any CPU writes before we write the relocations - */ - if (obj->write_domain & I915_GEM_DOMAIN_CPU) { - i915_gem_clflush_object(obj); - drm_agp_chipset_flush(dev); - obj->write_domain = 0; + ret = i915_gem_object_set_to_gtt_domain(obj, 1); + if (ret != 0) { + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); + return -EINVAL; } /* Map the page containing the relocation we're going to @@ -1783,6 +1949,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, int ret, i, pinned = 0; uint64_t exec_offset; uint32_t seqno, flush_domains; + int pin_tries; #if WATCH_EXEC DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", @@ -1831,14 +1998,7 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, return -EBUSY; } - /* Zero the gloabl flush/invalidate flags. These - * will be modified as each object is bound to the - * gtt - */ - dev->invalidate_domains = 0; - dev->flush_domains = 0; - - /* Look up object handles and perform the relocations */ + /* Look up object handles */ for (i = 0; i < args->buffer_count; i++) { object_list[i] = drm_gem_object_lookup(dev, file_priv, exec_list[i].handle); @@ -1848,17 +2008,39 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, ret = -EBADF; goto err; } + } - object_list[i]->pending_read_domains = 0; - object_list[i]->pending_write_domain = 0; - ret = i915_gem_object_pin_and_relocate(object_list[i], - file_priv, - &exec_list[i]); - if (ret) { - DRM_ERROR("object bind and relocate failed %d\n", ret); + /* Pin and relocate */ + for (pin_tries = 0; ; pin_tries++) { + ret = 0; + for (i = 0; i < args->buffer_count; i++) { + object_list[i]->pending_read_domains = 0; + object_list[i]->pending_write_domain = 0; + ret = i915_gem_object_pin_and_relocate(object_list[i], + file_priv, + &exec_list[i]); + if (ret) + break; + pinned = i + 1; + } + /* success */ + if (ret == 0) + break; + + /* error other than GTT full, or we've already tried again */ + if (ret != -ENOMEM || pin_tries >= 1) { + DRM_ERROR("Failed to pin buffers %d\n", ret); goto err; } - pinned = i + 1; + + /* unpin all of our buffers */ + for (i = 0; i < pinned; i++) + i915_gem_object_unpin(object_list[i]); + + /* evict everyone we can from the aperture */ + ret = i915_gem_evict_everything(dev); + if (ret) + goto err; } /* Set the pending read domains for the batch buffer to COMMAND */ @@ -1868,32 +2050,37 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, i915_verify_inactive(dev, __FILE__, __LINE__); + /* Zero the global flush/invalidate flags. These + * will be modified as new domains are computed + * for each object + */ + dev->invalidate_domains = 0; + dev->flush_domains = 0; + for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; - struct drm_i915_gem_object *obj_priv = obj->driver_private; - if (obj_priv->gtt_space == NULL) { - /* We evicted the buffer in the process of validating - * our set of buffers in. We could try to recover by - * kicking them everything out and trying again from - * the start. - */ - ret = -ENOMEM; - goto err; - } - - /* make sure all previous memory operations have passed */ - ret = i915_gem_object_set_domain(obj, - obj->pending_read_domains, - obj->pending_write_domain); - if (ret) - goto err; + /* Compute new gpu domains and update invalidate/flush */ + i915_gem_object_set_to_gpu_domain(obj, + obj->pending_read_domains, + obj->pending_write_domain); } i915_verify_inactive(dev, __FILE__, __LINE__); - /* Flush/invalidate caches and chipset buffer */ - flush_domains = i915_gem_dev_set_domain(dev); + if (dev->invalidate_domains | dev->flush_domains) { +#if WATCH_EXEC + DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", + __func__, + dev->invalidate_domains, + dev->flush_domains); +#endif + i915_gem_flush(dev, + dev->invalidate_domains, + dev->flush_domains); + if (dev->flush_domains) + (void)i915_add_request(dev, dev->flush_domains); + } i915_verify_inactive(dev, __FILE__, __LINE__); @@ -1913,8 +2100,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, ~0); #endif - (void)i915_add_request(dev, flush_domains); - /* Exec the batchbuffer */ ret = i915_dispatch_gem_execbuffer(dev, args, exec_offset); if (ret) { @@ -1942,10 +2127,8 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, i915_file_priv->mm.last_gem_seqno = seqno; for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; - struct drm_i915_gem_object *obj_priv = obj->driver_private; - i915_gem_object_move_to_active(obj); - obj_priv->last_rendering_seqno = seqno; + i915_gem_object_move_to_active(obj, seqno); #if WATCH_LRU DRM_INFO("%s: move to exec list %p\n", __func__, obj); #endif @@ -2076,11 +2259,7 @@ i915_gem_pin_ioctl(struct drm_device *dev, void *data, /* XXX - flush the CPU caches for pinned objects * as the X server doesn't manage domains yet */ - if (obj->write_domain & I915_GEM_DOMAIN_CPU) { - i915_gem_clflush_object(obj); - drm_agp_chipset_flush(dev); - obj->write_domain = 0; - } + i915_gem_object_flush_cpu_write_domain(obj); args->offset = obj_priv->gtt_offset; drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); @@ -2182,29 +2361,6 @@ void i915_gem_free_object(struct drm_gem_object *obj) drm_free(obj->driver_private, 1, DRM_MEM_DRIVER); } -static int -i915_gem_set_domain(struct drm_gem_object *obj, - struct drm_file *file_priv, - uint32_t read_domains, - uint32_t write_domain) -{ - struct drm_device *dev = obj->dev; - int ret; - uint32_t flush_domains; - - BUG_ON(!mutex_is_locked(&dev->struct_mutex)); - - ret = i915_gem_object_set_domain(obj, read_domains, write_domain); - if (ret) - return ret; - flush_domains = i915_gem_dev_set_domain(obj->dev); - - if (flush_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) - (void) i915_add_request(dev, flush_domains); - - return 0; -} - /** Unbinds all objects that are on the given buffer list. */ static int i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head) @@ -2299,29 +2455,52 @@ i915_gem_idle(struct drm_device *dev) i915_gem_retire_requests(dev); - /* Active and flushing should now be empty as we've - * waited for a sequence higher than any pending execbuffer - */ - BUG_ON(!list_empty(&dev_priv->mm.active_list)); - BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); + if (!dev_priv->mm.wedged) { + /* Active and flushing should now be empty as we've + * waited for a sequence higher than any pending execbuffer + */ + WARN_ON(!list_empty(&dev_priv->mm.active_list)); + WARN_ON(!list_empty(&dev_priv->mm.flushing_list)); + /* Request should now be empty as we've also waited + * for the last request in the list + */ + WARN_ON(!list_empty(&dev_priv->mm.request_list)); + } - /* Request should now be empty as we've also waited - * for the last request in the list + /* Empty the active and flushing lists to inactive. If there's + * anything left at this point, it means that we're wedged and + * nothing good's going to happen by leaving them there. So strip + * the GPU domains and just stuff them onto inactive. */ - BUG_ON(!list_empty(&dev_priv->mm.request_list)); + while (!list_empty(&dev_priv->mm.active_list)) { + struct drm_i915_gem_object *obj_priv; + + obj_priv = list_first_entry(&dev_priv->mm.active_list, + struct drm_i915_gem_object, + list); + obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS; + i915_gem_object_move_to_inactive(obj_priv->obj); + } + + while (!list_empty(&dev_priv->mm.flushing_list)) { + struct drm_i915_gem_object *obj_priv; - /* Move all buffers out of the GTT. */ + obj_priv = list_first_entry(&dev_priv->mm.flushing_list, + struct drm_i915_gem_object, + list); + obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS; + i915_gem_object_move_to_inactive(obj_priv->obj); + } + + + /* Move all inactive buffers out of the GTT. */ ret = i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list); + WARN_ON(!list_empty(&dev_priv->mm.inactive_list)); if (ret) { mutex_unlock(&dev->struct_mutex); return ret; } - BUG_ON(!list_empty(&dev_priv->mm.active_list)); - BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); - BUG_ON(!list_empty(&dev_priv->mm.inactive_list)); - BUG_ON(!list_empty(&dev_priv->mm.request_list)); - i915_gem_cleanup_ringbuffer(dev); mutex_unlock(&dev->struct_mutex); diff --git a/drivers/gpu/drm/i915/i915_gem_proc.c b/drivers/gpu/drm/i915/i915_gem_proc.c index 93de15b4c9a..e8d5abe1250 100644 --- a/drivers/gpu/drm/i915/i915_gem_proc.c +++ b/drivers/gpu/drm/i915/i915_gem_proc.c @@ -166,10 +166,9 @@ static int i915_gem_request_info(char *buf, char **start, off_t offset, list_for_each_entry(gem_request, &dev_priv->mm.request_list, list) { - DRM_PROC_PRINT(" %d @ %d %08x\n", + DRM_PROC_PRINT(" %d @ %d\n", gem_request->seqno, - (int) (jiffies - gem_request->emitted_jiffies), - gem_request->flush_domains); + (int) (jiffies - gem_request->emitted_jiffies)); } if (len > request + offset) return request; diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index e8b85ac4ca0..a8cb69469c6 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -119,9 +119,10 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) dcc & DCC_CHANNEL_XOR_DISABLE) { swizzle_x = I915_BIT_6_SWIZZLE_9_10; swizzle_y = I915_BIT_6_SWIZZLE_9; - } else if (IS_I965GM(dev) || IS_GM45(dev)) { - /* GM965 only does bit 11-based channel - * randomization + } else if ((IS_I965GM(dev) || IS_GM45(dev)) && + (dcc & DCC_CHANNEL_XOR_BIT_17) == 0) { + /* GM965/GM45 does either bit 11 or bit 17 + * swizzling. */ swizzle_x = I915_BIT_6_SWIZZLE_9_10_11; swizzle_y = I915_BIT_6_SWIZZLE_9_11; diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 82752d6177a..69b9a42da95 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -33,11 +33,23 @@ #define MAX_NOPID ((u32)~0) -/** These are the interrupts used by the driver */ -#define I915_INTERRUPT_ENABLE_MASK (I915_USER_INTERRUPT | \ - I915_ASLE_INTERRUPT | \ - I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ - I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) +/** + * Interrupts that are always left unmasked. + * + * Since pipe events are edge-triggered from the PIPESTAT register to IIR, + * we leave them always unmasked in IMR and then control enabling them through + * PIPESTAT alone. + */ +#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \ + I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \ + I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) + +/** Interrupts that we mask and unmask at runtime. */ +#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT) + +/** These are all of the interrupts used by the driver */ +#define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \ + I915_INTERRUPT_ENABLE_VAR) void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask) @@ -59,6 +71,41 @@ i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask) } } +static inline u32 +i915_pipestat(int pipe) +{ + if (pipe == 0) + return PIPEASTAT; + if (pipe == 1) + return PIPEBSTAT; + BUG(); +} + +void +i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask) +{ + if ((dev_priv->pipestat[pipe] & mask) != mask) { + u32 reg = i915_pipestat(pipe); + + dev_priv->pipestat[pipe] |= mask; + /* Enable the interrupt, clear any pending status */ + I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16)); + (void) I915_READ(reg); + } +} + +void +i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask) +{ + if ((dev_priv->pipestat[pipe] & mask) != 0) { + u32 reg = i915_pipestat(pipe); + + dev_priv->pipestat[pipe] &= ~mask; + I915_WRITE(reg, dev_priv->pipestat[pipe]); + (void) I915_READ(reg); + } +} + /** * i915_pipe_enabled - check if a pipe is enabled * @dev: DRM device @@ -121,80 +168,102 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) { struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 iir; + u32 iir, new_iir; u32 pipea_stats, pipeb_stats; + u32 vblank_status; + u32 vblank_enable; int vblank = 0; + unsigned long irqflags; + int irq_received; + int ret = IRQ_NONE; atomic_inc(&dev_priv->irq_received); - if (dev->pdev->msi_enabled) - I915_WRITE(IMR, ~0); iir = I915_READ(IIR); - if (iir == 0) { - if (dev->pdev->msi_enabled) { - I915_WRITE(IMR, dev_priv->irq_mask_reg); - (void) I915_READ(IMR); - } - return IRQ_NONE; + if (IS_I965G(dev)) { + vblank_status = I915_START_VBLANK_INTERRUPT_STATUS; + vblank_enable = PIPE_START_VBLANK_INTERRUPT_ENABLE; + } else { + vblank_status = I915_VBLANK_INTERRUPT_STATUS; + vblank_enable = I915_VBLANK_INTERRUPT_ENABLE; } - /* - * Clear the PIPE(A|B)STAT regs before the IIR otherwise - * we may get extra interrupts. - */ - if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) { + for (;;) { + irq_received = iir != 0; + + /* Can't rely on pipestat interrupt bit in iir as it might + * have been cleared after the pipestat interrupt was received. + * It doesn't set the bit in iir again, but it still produces + * interrupts (for non-MSI). + */ + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); pipea_stats = I915_READ(PIPEASTAT); - if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A)) - pipea_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | - PIPE_VBLANK_INTERRUPT_ENABLE); - else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| - PIPE_VBLANK_INTERRUPT_STATUS)) { + pipeb_stats = I915_READ(PIPEBSTAT); + /* + * Clear the PIPE(A|B)STAT regs before the IIR + */ + if (pipea_stats & 0x8000ffff) { + I915_WRITE(PIPEASTAT, pipea_stats); + irq_received = 1; + } + + if (pipeb_stats & 0x8000ffff) { + I915_WRITE(PIPEBSTAT, pipeb_stats); + irq_received = 1; + } + spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); + + if (!irq_received) + break; + + ret = IRQ_HANDLED; + + I915_WRITE(IIR, iir); + new_iir = I915_READ(IIR); /* Flush posted writes */ + + if (dev_priv->sarea_priv) + dev_priv->sarea_priv->last_dispatch = + READ_BREADCRUMB(dev_priv); + + if (iir & I915_USER_INTERRUPT) { + dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev); + DRM_WAKEUP(&dev_priv->irq_queue); + } + + if (pipea_stats & vblank_status) { vblank++; drm_handle_vblank(dev, 0); } - I915_WRITE(PIPEASTAT, pipea_stats); - } - if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) { - pipeb_stats = I915_READ(PIPEBSTAT); - /* Ack the event */ - I915_WRITE(PIPEBSTAT, pipeb_stats); - - /* The vblank interrupt gets enabled even if we didn't ask for - it, so make sure it's shut down again */ - if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B)) - pipeb_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | - PIPE_VBLANK_INTERRUPT_ENABLE); - else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| - PIPE_VBLANK_INTERRUPT_STATUS)) { + if (pipeb_stats & vblank_status) { vblank++; drm_handle_vblank(dev, 1); } - if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) + if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) || + (iir & I915_ASLE_INTERRUPT)) opregion_asle_intr(dev); - I915_WRITE(PIPEBSTAT, pipeb_stats); - } - - I915_WRITE(IIR, iir); - if (dev->pdev->msi_enabled) - I915_WRITE(IMR, dev_priv->irq_mask_reg); - (void) I915_READ(IIR); /* Flush posted writes */ - - if (dev_priv->sarea_priv) - dev_priv->sarea_priv->last_dispatch = - READ_BREADCRUMB(dev_priv); - if (iir & I915_USER_INTERRUPT) { - dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev); - DRM_WAKEUP(&dev_priv->irq_queue); + /* With MSI, interrupts are only generated when iir + * transitions from zero to nonzero. If another bit got + * set while we were handling the existing iir bits, then + * we would never get another interrupt. + * + * This is fine on non-MSI as well, as if we hit this path + * we avoid exiting the interrupt handler only to generate + * another one. + * + * Note that for MSI this could cause a stray interrupt report + * if an interrupt landed in the time between writing IIR and + * the posting read. This should be rare enough to never + * trigger the 99% of 100,000 interrupts test for disabling + * stray interrupts. + */ + iir = new_iir; } - if (iir & I915_ASLE_INTERRUPT) - opregion_asle_intr(dev); - - return IRQ_HANDLED; + return ret; } static int i915_emit_irq(struct drm_device * dev) @@ -330,48 +399,16 @@ int i915_irq_wait(struct drm_device *dev, void *data, int i915_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 pipestat_reg = 0; - u32 pipestat; - u32 interrupt = 0; unsigned long irqflags; - switch (pipe) { - case 0: - pipestat_reg = PIPEASTAT; - interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; - break; - case 1: - pipestat_reg = PIPEBSTAT; - interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; - break; - default: - DRM_ERROR("tried to enable vblank on non-existent pipe %d\n", - pipe); - return 0; - } - spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); - /* Enabling vblank events in IMR comes before PIPESTAT write, or - * there's a race where the PIPESTAT vblank bit gets set to 1, so - * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in - * ISR flashes to 1, but the IIR bit doesn't get set to 1 because - * IMR masks it. It doesn't ever get set after we clear the masking - * in IMR because the ISR bit is edge, not level-triggered, on the - * OR of PIPESTAT bits. - */ - i915_enable_irq(dev_priv, interrupt); - pipestat = I915_READ(pipestat_reg); if (IS_I965G(dev)) - pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE; + i915_enable_pipestat(dev_priv, pipe, + PIPE_START_VBLANK_INTERRUPT_ENABLE); else - pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE; - /* Clear any stale interrupt status */ - pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | - PIPE_VBLANK_INTERRUPT_STATUS); - I915_WRITE(pipestat_reg, pipestat); - (void) I915_READ(pipestat_reg); /* Posting read */ + i915_enable_pipestat(dev_priv, pipe, + PIPE_VBLANK_INTERRUPT_ENABLE); spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); - return 0; } @@ -381,37 +418,12 @@ int i915_enable_vblank(struct drm_device *dev, int pipe) void i915_disable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 pipestat_reg = 0; - u32 pipestat; - u32 interrupt = 0; unsigned long irqflags; - switch (pipe) { - case 0: - pipestat_reg = PIPEASTAT; - interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; - break; - case 1: - pipestat_reg = PIPEBSTAT; - interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; - break; - default: - DRM_ERROR("tried to disable vblank on non-existent pipe %d\n", - pipe); - return; - break; - } - spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); - i915_disable_irq(dev_priv, interrupt); - pipestat = I915_READ(pipestat_reg); - pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | - PIPE_VBLANK_INTERRUPT_ENABLE); - /* Clear any stale interrupt status */ - pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | - PIPE_VBLANK_INTERRUPT_STATUS); - I915_WRITE(pipestat_reg, pipestat); - (void) I915_READ(pipestat_reg); /* Posting read */ + i915_disable_pipestat(dev_priv, pipe, + PIPE_VBLANK_INTERRUPT_ENABLE | + PIPE_START_VBLANK_INTERRUPT_ENABLE); spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } @@ -476,32 +488,35 @@ void i915_driver_irq_preinstall(struct drm_device * dev) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; I915_WRITE(HWSTAM, 0xeffe); + I915_WRITE(PIPEASTAT, 0); + I915_WRITE(PIPEBSTAT, 0); I915_WRITE(IMR, 0xffffffff); I915_WRITE(IER, 0x0); + (void) I915_READ(IER); } int i915_driver_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - int ret, num_pipes = 2; - - /* Set initial unmasked IRQs to just the selected vblank pipes. */ - dev_priv->irq_mask_reg = ~0; - - ret = drm_vblank_init(dev, num_pipes); - if (ret) - return ret; dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B; - dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT; - dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT; dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */ - dev_priv->irq_mask_reg &= I915_INTERRUPT_ENABLE_MASK; + /* Unmask the interrupts that we always want on. */ + dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX; + + dev_priv->pipestat[0] = 0; + dev_priv->pipestat[1] = 0; + + /* Disable pipe interrupt enables, clear pending pipe status */ + I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff); + I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff); + /* Clear pending interrupt status */ + I915_WRITE(IIR, I915_READ(IIR)); - I915_WRITE(IMR, dev_priv->irq_mask_reg); I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK); + I915_WRITE(IMR, dev_priv->irq_mask_reg); (void) I915_READ(IER); opregion_enable_asle(dev); @@ -513,7 +528,6 @@ int i915_driver_irq_postinstall(struct drm_device *dev) void i915_driver_irq_uninstall(struct drm_device * dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 temp; if (!dev_priv) return; @@ -521,13 +535,12 @@ void i915_driver_irq_uninstall(struct drm_device * dev) dev_priv->vblank_pipe = 0; I915_WRITE(HWSTAM, 0xffffffff); + I915_WRITE(PIPEASTAT, 0); + I915_WRITE(PIPEBSTAT, 0); I915_WRITE(IMR, 0xffffffff); I915_WRITE(IER, 0x0); - temp = I915_READ(PIPEASTAT); - I915_WRITE(PIPEASTAT, temp); - temp = I915_READ(PIPEBSTAT); - I915_WRITE(PIPEBSTAT, temp); - temp = I915_READ(IIR); - I915_WRITE(IIR, temp); + I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff); + I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff); + I915_WRITE(IIR, I915_READ(IIR)); } diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c index 1787a0c7e3a..13ae731a33d 100644 --- a/drivers/gpu/drm/i915/i915_opregion.c +++ b/drivers/gpu/drm/i915/i915_opregion.c @@ -235,17 +235,15 @@ void opregion_enable_asle(struct drm_device *dev) struct opregion_asle *asle = dev_priv->opregion.asle; if (asle) { - u32 pipeb_stats = I915_READ(PIPEBSTAT); if (IS_MOBILE(dev)) { - /* Many devices trigger events with a write to the - legacy backlight controller, so we need to ensure - that it's able to generate interrupts */ - I915_WRITE(PIPEBSTAT, pipeb_stats |= - I915_LEGACY_BLC_EVENT_ENABLE); - i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT | - I915_DISPLAY_PIPE_B_EVENT_INTERRUPT); - } else - i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT); + unsigned long irqflags; + + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); + i915_enable_pipestat(dev_priv, 1, + I915_LEGACY_BLC_EVENT_ENABLE); + spin_unlock_irqrestore(&dev_priv->user_irq_lock, + irqflags); + } asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN | ASLE_PFMB_EN; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 0e476eba36e..9d24aaeb8a4 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -522,6 +522,7 @@ #define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0) #define DCC_ADDRESSING_MODE_MASK (3 << 0) #define DCC_CHANNEL_XOR_DISABLE (1 << 10) +#define DCC_CHANNEL_XOR_BIT_17 (1 << 9) /** 965 MCH register controlling DRAM channel configuration */ #define C0DRB3 0x10206 diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 5ddc6e595c0..5d84027ee8f 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -244,6 +244,9 @@ int i915_save_state(struct drm_device *dev) if (IS_I965G(dev) && IS_MOBILE(dev)) dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY); + /* Hardware status page */ + dev_priv->saveHWS = I915_READ(HWS_PGA); + /* Display arbitration control */ dev_priv->saveDSPARB = I915_READ(DSPARB); @@ -373,6 +376,9 @@ int i915_restore_state(struct drm_device *dev) if (IS_I965G(dev) && IS_MOBILE(dev)) I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY); + /* Hardware status page */ + I915_WRITE(HWS_PGA, dev_priv->saveHWS); + /* Display arbitration */ I915_WRITE(DSPARB, dev_priv->saveDSPARB); diff --git a/drivers/gpu/drm/mga/mga_dma.c b/drivers/gpu/drm/mga/mga_dma.c index c1d12dbfa8d..b49c5ff2958 100644 --- a/drivers/gpu/drm/mga/mga_dma.c +++ b/drivers/gpu/drm/mga/mga_dma.c @@ -396,6 +396,7 @@ int mga_freelist_put(struct drm_device * dev, struct drm_buf * buf) int mga_driver_load(struct drm_device * dev, unsigned long flags) { drm_mga_private_t *dev_priv; + int ret; dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER); if (!dev_priv) @@ -415,6 +416,13 @@ int mga_driver_load(struct drm_device * dev, unsigned long flags) dev->types[7] = _DRM_STAT_PRIMARY; dev->types[8] = _DRM_STAT_SECONDARY; + ret = drm_vblank_init(dev, 1); + + if (ret) { + (void) mga_driver_unload(dev); + return ret; + } + return 0; } diff --git a/drivers/gpu/drm/mga/mga_irq.c b/drivers/gpu/drm/mga/mga_irq.c index bab42f41188..daa6041a483 100644 --- a/drivers/gpu/drm/mga/mga_irq.c +++ b/drivers/gpu/drm/mga/mga_irq.c @@ -152,11 +152,6 @@ void mga_driver_irq_preinstall(struct drm_device * dev) int mga_driver_irq_postinstall(struct drm_device *dev) { drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private; - int ret; - - ret = drm_vblank_init(dev, 1); - if (ret) - return ret; DRM_INIT_WAITQUEUE(&dev_priv->fence_queue); diff --git a/drivers/gpu/drm/r128/r128_drv.c b/drivers/gpu/drm/r128/r128_drv.c index 3265d53ba91..601f4c0e5da 100644 --- a/drivers/gpu/drm/r128/r128_drv.c +++ b/drivers/gpu/drm/r128/r128_drv.c @@ -45,6 +45,7 @@ static struct drm_driver driver = { DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG | DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED, .dev_priv_size = sizeof(drm_r128_buf_priv_t), + .load = r128_driver_load, .preclose = r128_driver_preclose, .lastclose = r128_driver_lastclose, .get_vblank_counter = r128_get_vblank_counter, @@ -84,6 +85,11 @@ static struct drm_driver driver = { .patchlevel = DRIVER_PATCHLEVEL, }; +int r128_driver_load(struct drm_device * dev, unsigned long flags) +{ + return drm_vblank_init(dev, 1); +} + static int __init r128_init(void) { driver.num_ioctls = r128_max_ioctl; diff --git a/drivers/gpu/drm/r128/r128_drv.h b/drivers/gpu/drm/r128/r128_drv.h index 5898b274279..797a26c42da 100644 --- a/drivers/gpu/drm/r128/r128_drv.h +++ b/drivers/gpu/drm/r128/r128_drv.h @@ -159,6 +159,7 @@ extern void r128_driver_irq_preinstall(struct drm_device * dev); extern int r128_driver_irq_postinstall(struct drm_device *dev); extern void r128_driver_irq_uninstall(struct drm_device * dev); extern void r128_driver_lastclose(struct drm_device * dev); +extern int r128_driver_load(struct drm_device * dev, unsigned long flags); extern void r128_driver_preclose(struct drm_device * dev, struct drm_file *file_priv); diff --git a/drivers/gpu/drm/r128/r128_irq.c b/drivers/gpu/drm/r128/r128_irq.c index d7349012a68..69810fb8ac4 100644 --- a/drivers/gpu/drm/r128/r128_irq.c +++ b/drivers/gpu/drm/r128/r128_irq.c @@ -102,7 +102,7 @@ void r128_driver_irq_preinstall(struct drm_device * dev) int r128_driver_irq_postinstall(struct drm_device *dev) { - return drm_vblank_init(dev, 1); + return 0; } void r128_driver_irq_uninstall(struct drm_device * dev) diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index abdc1ae3846..dcebb4bee7a 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -1757,6 +1757,12 @@ int radeon_driver_load(struct drm_device *dev, unsigned long flags) if (ret != 0) return ret; + ret = drm_vblank_init(dev, 2); + if (ret) { + radeon_driver_unload(dev); + return ret; + } + DRM_DEBUG("%s card detected\n", ((dev_priv->flags & RADEON_IS_AGP) ? "AGP" : (((dev_priv->flags & RADEON_IS_PCIE) ? "PCIE" : "PCI")))); return ret; diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index 7a183789be9..3bbb871b25d 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -299,7 +299,6 @@ typedef struct drm_radeon_private { atomic_t swi_emitted; int vblank_crtc; uint32_t irq_enable_reg; - int irq_enabled; uint32_t r500_disp_irq_reg; struct radeon_surface surfaces[RADEON_MAX_SURFACES]; diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c index 5079f7054a2..99be11418ac 100644 --- a/drivers/gpu/drm/radeon/radeon_irq.c +++ b/drivers/gpu/drm/radeon/radeon_irq.c @@ -44,7 +44,8 @@ void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state) else dev_priv->irq_enable_reg &= ~mask; - RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); + if (!dev->irq_enabled) + RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg); } static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state) @@ -56,7 +57,8 @@ static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state) else dev_priv->r500_disp_irq_reg &= ~mask; - RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg); + if (!dev->irq_enabled) + RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg); } int radeon_enable_vblank(struct drm_device *dev, int crtc) @@ -337,15 +339,10 @@ int radeon_driver_irq_postinstall(struct drm_device *dev) { drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private; - int ret; atomic_set(&dev_priv->swi_emitted, 0); DRM_INIT_WAITQUEUE(&dev_priv->swi_queue); - ret = drm_vblank_init(dev, 2); - if (ret) - return ret; - dev->max_vblank_count = 0x001fffff; radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1); @@ -360,8 +357,6 @@ void radeon_driver_irq_uninstall(struct drm_device * dev) if (!dev_priv) return; - dev_priv->irq_enabled = 0; - if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690) RADEON_WRITE(R500_DxMODE_INT_MASK, 0); /* Disable *all* interrupts */ diff --git a/drivers/gpu/drm/via/via_irq.c b/drivers/gpu/drm/via/via_irq.c index 665d319b927..c248c1d3726 100644 --- a/drivers/gpu/drm/via/via_irq.c +++ b/drivers/gpu/drm/via/via_irq.c @@ -314,7 +314,6 @@ int via_driver_irq_postinstall(struct drm_device *dev) if (!dev_priv) return -EINVAL; - drm_vblank_init(dev, 1); status = VIA_READ(VIA_REG_INTERRUPT); VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL | dev_priv->irq_enable_mask); diff --git a/drivers/gpu/drm/via/via_map.c b/drivers/gpu/drm/via/via_map.c index a967556be01..2c4f0b48579 100644 --- a/drivers/gpu/drm/via/via_map.c +++ b/drivers/gpu/drm/via/via_map.c @@ -107,8 +107,17 @@ int via_driver_load(struct drm_device *dev, unsigned long chipset) ret = drm_sman_init(&dev_priv->sman, 2, 12, 8); if (ret) { drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER); + return ret; } - return ret; + + ret = drm_vblank_init(dev, 1); + if (ret) { + drm_sman_takedown(&dev_priv->sman); + drm_free(dev_priv, sizeof(drm_via_private_t), DRM_MEM_DRIVER); + return ret; + } + + return 0; } int via_driver_unload(struct drm_device *dev) diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c index 9b97795e45a..aa28aed0e46 100644 --- a/drivers/hid/hid-apple.c +++ b/drivers/hid/hid-apple.c @@ -400,12 +400,12 @@ static const struct hid_device_id apple_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | APPLE_RDESC_JIS }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI), + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO), + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN | APPLE_ISO_KEYBOARD }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS), + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS), .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI), .driver_data = APPLE_HAS_FN }, diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 147ec591a80..40df3e1b4bd 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1241,9 +1241,9 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) }, + { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS) }, @@ -1266,6 +1266,9 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) }, { HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) }, + { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) }, { HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) }, @@ -1420,7 +1423,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) }, { HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) }, { HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) }, - { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) }, { HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) }, @@ -1436,7 +1438,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_SUPER_Q2) }, { HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_GOGOPEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_PENPOWER) }, - { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_GRETAGMACBETH, USB_DEVICE_ID_GRETAGMACBETH_HUEY) }, { HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE) }, { HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB) }, @@ -1576,9 +1577,6 @@ static const struct hid_device_id hid_mouse_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) }, - { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) }, { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) }, { } diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index d70075dd3d8..39289699c32 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -163,6 +163,7 @@ #define USB_VENDOR_ID_GAMERON 0x0810 #define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR 0x0001 +#define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002 #define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc diff --git a/drivers/hid/hid-pl.c b/drivers/hid/hid-pl.c index acd81558618..46941f979b9 100644 --- a/drivers/hid/hid-pl.c +++ b/drivers/hid/hid-pl.c @@ -178,6 +178,8 @@ err: static const struct hid_device_id pl_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR), .driver_data = 1 }, /* Twin USB Joystick */ + { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR), + .driver_data = 1 }, /* Twin USB Joystick */ { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003), }, /* GreenAsia Inc. USB Joystick */ { } }; diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index d746bf8284d..606369ea24c 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -796,7 +796,6 @@ static int usbhid_start(struct hid_device *hid) if (insize > HID_MAX_BUFFER_SIZE) insize = HID_MAX_BUFFER_SIZE; - mutex_lock(&usbhid->setup); if (hid_alloc_buffers(dev, hid)) { ret = -ENOMEM; goto fail; @@ -876,7 +875,6 @@ static int usbhid_start(struct hid_device *hid) hid_dump_device(hid); set_bit(HID_STARTED, &usbhid->iofl); - mutex_unlock(&usbhid->setup); return 0; @@ -888,7 +886,6 @@ fail: usbhid->urbout = NULL; usbhid->urbctrl = NULL; hid_free_buffers(dev, hid); - mutex_unlock(&usbhid->setup); return ret; } @@ -899,7 +896,6 @@ static void usbhid_stop(struct hid_device *hid) if (WARN_ON(!usbhid)) return; - mutex_lock(&usbhid->setup); clear_bit(HID_STARTED, &usbhid->iofl); spin_lock_irq(&usbhid->inlock); /* Sync with error handler */ set_bit(HID_DISCONNECTED, &usbhid->iofl); @@ -928,7 +924,6 @@ static void usbhid_stop(struct hid_device *hid) usbhid->urbout = NULL; hid_free_buffers(hid_to_usb_dev(hid), hid); - mutex_unlock(&usbhid->setup); } static struct hid_ll_driver usb_hid_driver = { @@ -1016,7 +1011,6 @@ static int hid_probe(struct usb_interface *intf, const struct usb_device_id *id) hid->driver_data = usbhid; usbhid->hid = hid; - mutex_init(&usbhid->setup); /* needed on suspend/resume */ ret = hid_add_device(hid); if (ret) { @@ -1051,18 +1045,14 @@ static int hid_suspend(struct usb_interface *intf, pm_message_t message) struct hid_device *hid = usb_get_intfdata (intf); struct usbhid_device *usbhid = hid->driver_data; - mutex_lock(&usbhid->setup); - if (!test_bit(HID_STARTED, &usbhid->iofl)) { - mutex_unlock(&usbhid->setup); + if (!test_bit(HID_STARTED, &usbhid->iofl)) return 0; - } spin_lock_irq(&usbhid->inlock); /* Sync with error handler */ set_bit(HID_SUSPENDED, &usbhid->iofl); spin_unlock_irq(&usbhid->inlock); del_timer_sync(&usbhid->io_retry); usb_kill_urb(usbhid->urbin); - mutex_unlock(&usbhid->setup); dev_dbg(&intf->dev, "suspend\n"); return 0; } @@ -1073,16 +1063,12 @@ static int hid_resume(struct usb_interface *intf) struct usbhid_device *usbhid = hid->driver_data; int status; - mutex_lock(&usbhid->setup); - if (!test_bit(HID_STARTED, &usbhid->iofl)) { - mutex_unlock(&usbhid->setup); + if (!test_bit(HID_STARTED, &usbhid->iofl)) return 0; - } clear_bit(HID_SUSPENDED, &usbhid->iofl); usbhid->retry_delay = 0; status = hid_start_in(hid); - mutex_unlock(&usbhid->setup); dev_dbg(&intf->dev, "resume status %d\n", status); return status; } diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h index 55973ff5400..332abcdf995 100644 --- a/drivers/hid/usbhid/usbhid.h +++ b/drivers/hid/usbhid/usbhid.h @@ -74,7 +74,6 @@ struct usbhid_device { dma_addr_t outbuf_dma; /* Output buffer dma */ spinlock_t outlock; /* Output fifo spinlock */ - struct mutex setup; unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */ struct timer_list io_retry; /* Retry timer */ unsigned long stop_retry; /* Time to give up, in jiffies */ diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index f7dce8b9f64..086c2a5cef0 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -1564,3 +1564,4 @@ module_exit(applesmc_exit); MODULE_AUTHOR("Nicolas Boichat"); MODULE_DESCRIPTION("Apple SMC"); MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(dmi, applesmc_whitelist); diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c index f4d22ae9d29..e5a8dae4a28 100644 --- a/drivers/i2c/busses/i2c-highlander.c +++ b/drivers/i2c/busses/i2c-highlander.c @@ -92,7 +92,7 @@ static void highlander_i2c_setup(struct highlander_i2c_dev *dev) static void smbus_write_data(u8 *src, u16 *dst, int len) { for (; len > 1; len -= 2) { - *dst++ = be16_to_cpup((u16 *)src); + *dst++ = be16_to_cpup((__be16 *)src); src += 2; } @@ -103,7 +103,7 @@ static void smbus_write_data(u8 *src, u16 *dst, int len) static void smbus_read_data(u16 *src, u8 *dst, int len) { for (; len > 1; len -= 2) { - *(u16 *)dst = cpu_to_be16p(src++); + *(__be16 *)dst = cpu_to_be16p(src++); dst += 2; } diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index 59ba2086d2f..a257cd5cd13 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -189,8 +189,6 @@ static void i2c_parport_attach (struct parport *port) if (adapter_parm[type].init.val) line_set(port, 1, &adapter_parm[type].init); - parport_release(adapter->pdev); - if (i2c_bit_add_bus(&adapter->adapter) < 0) { printk(KERN_ERR "i2c-parport: Unable to register with I2C\n"); goto ERROR1; @@ -202,6 +200,7 @@ static void i2c_parport_attach (struct parport *port) return; ERROR1: + parport_release(adapter->pdev); parport_unregister_device(adapter->pdev); ERROR0: kfree(adapter); @@ -221,6 +220,7 @@ static void i2c_parport_detach (struct parport *port) if (adapter_parm[type].init.val) line_set(port, 0, &adapter_parm[type].init); + parport_release(adapter->pdev); parport_unregister_device(adapter->pdev); if (prev) prev->next = adapter->next; diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c index dcf2045b522..0bdb2d7f057 100644 --- a/drivers/i2c/busses/i2c-pmcmsp.c +++ b/drivers/i2c/busses/i2c-pmcmsp.c @@ -486,7 +486,7 @@ static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd( if (cmd->type == MSP_TWI_CMD_WRITE || cmd->type == MSP_TWI_CMD_WRITE_READ) { - __be64 tmp = cpu_to_be64p((u64 *)cmd->write_data); + u64 tmp = be64_to_cpup((__be64 *)cmd->write_data); tmp >>= (MSP_MAX_BYTES_PER_RW - cmd->write_len) * 8; dev_dbg(&pmcmsptwi_adapter.dev, "Writing 0x%016llx\n", tmp); pmcmsptwi_writel(tmp & 0x00000000ffffffffLL, diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 906f9b9d715..587f5b2380d 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1016,7 +1016,7 @@ static int i2c_pxa_probe(struct platform_device *dev) snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u", i2c->adap.nr); - i2c->clk = clk_get(&dev->dev, "I2CCLK"); + i2c->clk = clk_get(&dev->dev, NULL); if (IS_ERR(i2c->clk)) { ret = PTR_ERR(i2c->clk); goto eclk; diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 1fac4e23313..fdebd930408 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -40,8 +40,8 @@ #include <asm/io.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c/regs-iic.h> -#include <asm/plat-s3c/iic.h> +#include <plat/regs-iic.h> +#include <plat/iic.h> /* i2c controller state */ diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index 28902ebd553..e0d56ef2bcb 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -25,6 +25,7 @@ #include <linux/slab.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/gpio.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <linux/usb.h> @@ -33,7 +34,10 @@ #include <linux/workqueue.h> #include <asm/irq.h> +#include <asm/mach-types.h> + #include <mach/usb.h> +#include <mach/mux.h> #ifndef DEBUG @@ -88,14 +92,9 @@ struct isp1301 { /*-------------------------------------------------------------------------*/ -#ifdef CONFIG_MACH_OMAP_H2 - /* board-specific PM hooks */ -#include <asm/gpio.h> -#include <mach/mux.h> -#include <asm/mach-types.h> - +#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3) #if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE) @@ -135,6 +134,33 @@ static inline void notresponding(struct isp1301 *isp) #endif +#if defined(CONFIG_MACH_OMAP_H4) + +static void enable_vbus_draw(struct isp1301 *isp, unsigned mA) +{ + /* H4 controls this by DIP switch S2.4; no soft control. + * ON means the charger is always enabled. Leave it OFF + * unless the OTG port is used only in B-peripheral mode. + */ +} + +static void enable_vbus_source(struct isp1301 *isp) +{ + /* this board won't supply more than 8mA vbus power. + * some boards can switch a 100ma "unit load" (or more). + */ +} + + +/* products will deliver OTG messages with LEDs, GUI, etc */ +static inline void notresponding(struct isp1301 *isp) +{ + printk(KERN_NOTICE "OTG device not responding.\n"); +} + + +#endif + /*-------------------------------------------------------------------------*/ static struct i2c_driver isp1301_driver; @@ -334,8 +360,7 @@ static int gadget_suspend(struct isp1301 *isp) * NOTE: guaranteeing certain response times might mean we shouldn't * share keventd's work queue; a realtime task might be safest. */ -void -isp1301_defer_work(struct isp1301 *isp, int work) +static void isp1301_defer_work(struct isp1301 *isp, int work) { int status; @@ -512,7 +537,6 @@ static void update_otg1(struct isp1301 *isp, u8 int_src) otg_ctrl &= ~OTG_XCEIV_INPUTS; otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD); - if (int_src & INTR_SESS_VLD) otg_ctrl |= OTG_ASESSVLD; else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) { @@ -886,11 +910,11 @@ static int otg_probe(struct platform_device *dev) static int otg_remove(struct platform_device *dev) { - otg_dev = 0; + otg_dev = NULL; return 0; } -struct platform_driver omap_otg_driver = { +static struct platform_driver omap_otg_driver = { .probe = otg_probe, .remove = otg_remove, .driver = { @@ -1212,6 +1236,8 @@ static void isp1301_release(struct device *dev) isp = dev_get_drvdata(dev); + /* FIXME -- not with a "new style" driver, it doesn't!! */ + /* ugly -- i2c hijacks our memory hook to wait_for_completion() */ if (isp->i2c_release) isp->i2c_release(dev); @@ -1233,7 +1259,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c) otg_unbind(isp); #endif if (machine_is_omap_h2()) - omap_free_gpio(2); + gpio_free(2); isp->timer.data = 0; set_bit(WORK_STOP, &isp->todo); @@ -1241,7 +1267,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c) flush_scheduled_work(); put_device(&i2c->dev); - the_transceiver = 0; + the_transceiver = NULL; return 0; } @@ -1295,7 +1321,7 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host) if (!host) { omap_writew(0, OTG_IRQ_EN); power_down(isp); - isp->otg.host = 0; + isp->otg.host = NULL; return 0; } @@ -1344,7 +1370,9 @@ static int isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) { struct isp1301 *isp = container_of(otg, struct isp1301, otg); +#ifndef CONFIG_USB_OTG u32 l; +#endif if (!otg || isp != the_transceiver) return -ENODEV; @@ -1354,7 +1382,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) if (!isp->otg.default_a) enable_vbus_draw(isp, 0); usb_gadget_vbus_disconnect(isp->otg.gadget); - isp->otg.gadget = 0; + isp->otg.gadget = NULL; power_down(isp); return 0; } @@ -1379,7 +1407,7 @@ isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget) power_up(isp); isp->otg.state = OTG_STATE_B_IDLE; - if (machine_is_omap_h2()) + if (machine_is_omap_h2() || machine_is_omap_h3()) isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, @@ -1499,7 +1527,8 @@ isp1301_start_hnp(struct otg_transceiver *dev) /*-------------------------------------------------------------------------*/ -static int __init isp1301_probe(struct i2c_client *i2c) +static int __init +isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { int status; struct isp1301 *isp; @@ -1647,7 +1676,7 @@ module_init(isp_init); static void __exit isp_exit(void) { if (the_transceiver) - otg_set_transceiver(0); + otg_set_transceiver(NULL); i2c_del_driver(&isp1301_driver); } module_exit(isp_exit); diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 5a485c22660..c6a63f46bc1 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -631,7 +631,7 @@ int i2c_del_adapter(struct i2c_adapter *adap) /* detach any active clients. This must be done first, because * it can fail; in which case we give up. */ - list_for_each_entry_safe(client, _n, &adap->clients, list) { + list_for_each_entry_safe_reverse(client, _n, &adap->clients, list) { struct i2c_driver *driver; driver = client->driver; diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 6d7401772a8..1a00bb7db87 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -669,10 +669,12 @@ config BLK_DEV_CELLEB endif +# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF config BLK_DEV_IDE_PMAC tristate "PowerMac on-board IDE support" depends on PPC_PMAC && IDE=y select IDE_TIMINGS + select BLK_DEV_IDEDMA_PCI help This driver provides support for the on-board IDE controller on most of the recent Apple Power Macintoshes and PowerBooks. @@ -689,16 +691,6 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST CD-ROM on hda. This option changes this to more natural hda for hard disk and hdc for CD-ROM. -config BLK_DEV_IDEDMA_PMAC - bool "PowerMac IDE DMA support" - depends on BLK_DEV_IDE_PMAC - select BLK_DEV_IDEDMA_PCI - help - This option allows the driver for the on-board IDE controller on - Power Macintoshes and PowerBooks to use DMA (direct memory access) - to transfer data to and from memory. Saying Y is safe and improves - performance. - config BLK_DEV_IDE_AU1XXX bool "IDE for AMD Alchemy Au1200" depends on SOC_AU1200 @@ -732,7 +724,7 @@ config BLK_DEV_IDE_TX4939 config IDE_ARM tristate "ARM IDE support" - depends on ARM && (ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK) + depends on ARM && (ARCH_RPC || ARCH_SHARK) default y config BLK_DEV_IDE_ICSIDE @@ -912,7 +904,7 @@ config BLK_DEV_UMC8672 endif config BLK_DEV_IDEDMA - def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \ + def_bool BLK_DEV_IDEDMA_SFF || \ BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA endif # IDE diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index e56c7b72f9e..45d2356bb72 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c @@ -591,7 +591,7 @@ static int __init ali15x3_ide_init(void) static void __exit ali15x3_ide_exit(void) { - return pci_unregister_driver(&alim15x3_pci_driver); + pci_unregister_driver(&alim15x3_pci_driver); } module_init(ali15x3_ide_init); diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c index 81ec73134ed..c6bcd3014a2 100644 --- a/drivers/ide/amd74xx.c +++ b/drivers/ide/amd74xx.c @@ -3,7 +3,7 @@ * IDE driver for Linux. * * Copyright (c) 2000-2002 Vojtech Pavlik - * Copyright (c) 2007 Bartlomiej Zolnierkiewicz + * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz * * Based on the work of: * Andre Hedrick @@ -263,6 +263,15 @@ static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_ d.udma_mask = ATA_UDMA5; } + /* + * It seems that on some nVidia controllers using AltStatus + * register can be unreliable so default to Status register + * if the device is in Compatibility Mode. + */ + if (dev->vendor == PCI_VENDOR_ID_NVIDIA && + ide_pci_is_in_compatibility_mode(dev)) + d.host_flags |= IDE_HFLAG_BROKEN_ALTSTATUS; + printk(KERN_INFO "%s %s: UDMA%s controller\n", d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]); diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 2d848010499..81f70caeb40 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -419,7 +419,7 @@ static void icside_setup_ports(hw_regs_t *hw, void __iomem *base, hw->chipset = ide_acorn; } -static int __init +static int __devinit icside_register_v5(struct icside_state *state, struct expansion_card *ec) { void __iomem *base; @@ -473,7 +473,7 @@ static const struct ide_port_info icside_v6_port_info __initdata = { .swdma_mask = ATA_SWDMA2, }; -static int __init +static int __devinit icside_register_v6(struct icside_state *state, struct expansion_card *ec) { void __iomem *ioc_base, *easi_base; diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 7162d67562a..cc35d6dbd41 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -132,10 +132,14 @@ int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors) } EXPORT_SYMBOL(ide_end_request); -static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error) +static void ide_complete_power_step(ide_drive_t *drive, struct request *rq) { struct request_pm_state *pm = rq->data; +#ifdef DEBUG_PM + printk(KERN_INFO "%s: complete_power_step(step: %d)\n", + drive->name, pm->pm_step); +#endif if (drive->media != ide_disk) return; @@ -172,7 +176,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * /* Not supported? Switch to next step now. */ if (ata_id_flush_enabled(drive->id) == 0 || (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) { - ide_complete_power_step(drive, rq, 0, 0); + ide_complete_power_step(drive, rq); return ide_stopped; } if (ata_id_flush_ext_enabled(drive->id)) @@ -191,7 +195,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request * if (drive->media != ide_disk) pm->pm_step = IDE_PM_RESTORE_DMA; else - ide_complete_power_step(drive, rq, 0, 0); + ide_complete_power_step(drive, rq); return ide_stopped; case IDE_PM_IDLE: /* Resume step 2 (idle) */ args->tf.command = ATA_CMD_IDLEIMMEDIATE; @@ -322,11 +326,8 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err) } } else if (blk_pm_request(rq)) { struct request_pm_state *pm = rq->data; -#ifdef DEBUG_PM - printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n", - drive->name, rq->pm->pm_step, stat, err); -#endif - ide_complete_power_step(drive, rq, stat, err); + + ide_complete_power_step(drive, rq); if (pm->pm_step == IDE_PM_COMPLETED) ide_complete_pm_request(drive, rq); return; @@ -804,7 +805,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq) struct request_pm_state *pm = rq->data; #ifdef DEBUG_PM printk("%s: start_power_step(step: %d)\n", - drive->name, rq->pm->pm_step); + drive->name, pm->pm_step); #endif startstop = ide_start_power_step(drive, rq); if (startstop == ide_stopped && @@ -967,14 +968,13 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq) ide_startstop_t startstop; int loops = 0; - /* for atari only: POSSIBLY BROKEN HERE(?) */ - ide_get_lock(ide_intr, hwgroup); - /* caller must own ide_lock */ BUG_ON(!irqs_disabled()); while (!hwgroup->busy) { hwgroup->busy = 1; + /* for atari only */ + ide_get_lock(ide_intr, hwgroup); drive = choose_drive(hwgroup); if (drive == NULL) { int sleeping = 0; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 5d6ba14e211..c41c3b9b6f0 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -457,18 +457,14 @@ int drive_is_ready (ide_drive_t *drive) if (drive->waiting_for_dma) return hwif->dma_ops->dma_test_irq(drive); -#if 0 - /* need to guarantee 400ns since last command was issued */ - udelay(1); -#endif - /* * We do a passive status test under shared PCI interrupts on * cards that truly share the ATA side interrupt, but may also share * an interrupt with another pci card/device. We make no assumptions * about possible isa-pnp and pci-pnp issues yet. */ - if (hwif->io_ports.ctl_addr) + if (hwif->io_ports.ctl_addr && + (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) stat = hwif->tp_ops->read_altstatus(hwif); else /* Note: this may clear a pending IRQ!! */ @@ -610,6 +606,7 @@ static const struct drive_list_entry ivb_list[] = { { "TSSTcorp CDDVDW SH-S202N" , "SB01" }, { "TSSTcorp CDDVDW SH-S202H" , "SB00" }, { "TSSTcorp CDDVDW SH-S202H" , "SB01" }, + { "SAMSUNG SP0822N" , "WA100-10" }, { NULL , NULL } }; diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 1649ea54f76..c55bdbd2231 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -266,7 +266,8 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) /* take a deep breath */ msleep(50); - if (io_ports->ctl_addr) { + if (io_ports->ctl_addr && + (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) { a = tp_ops->read_altstatus(hwif); s = tp_ops->read_status(hwif); if ((a ^ s) & ~ATA_IDX) diff --git a/drivers/ide/ide_arm.c b/drivers/ide/ide_arm.c index f728f2927b5..bdcac94d7c1 100644 --- a/drivers/ide/ide_arm.c +++ b/drivers/ide/ide_arm.c @@ -15,15 +15,8 @@ #define DRV_NAME "ide_arm" -#ifdef CONFIG_ARCH_CLPS7500 -# include <mach/hardware.h> -# -# define IDE_ARM_IO (ISASLOT_IO + 0x1f0) -# define IDE_ARM_IRQ IRQ_ISA_14 -#else -# define IDE_ARM_IO 0x1f0 -# define IDE_ARM_IRQ IRQ_HARDDISK -#endif +#define IDE_ARM_IO 0x1f0 +#define IDE_ARM_IRQ IRQ_HARDDISK static int __init ide_arm_init(void) { diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c index 2e19d629853..7c481bb56fa 100644 --- a/drivers/ide/pmac.c +++ b/drivers/ide/pmac.c @@ -66,7 +66,6 @@ typedef struct pmac_ide_hwif { struct macio_dev *mdev; u32 timings[4]; volatile u32 __iomem * *kauai_fcr; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC /* Those fields are duplicating what is in hwif. We currently * can't use the hwif ones because of some assumptions that are * beeing done by the generic code about the kind of dma controller @@ -74,8 +73,6 @@ typedef struct pmac_ide_hwif { */ volatile struct dbdma_regs __iomem * dma_regs; struct dbdma_cmd* dma_table_cpu; -#endif - } pmac_ide_hwif_t; enum { @@ -222,8 +219,6 @@ static const char* model_name[] = { #define KAUAI_FCR_UATA_RESET_N 0x00000002 #define KAUAI_FCR_UATA_ENABLE 0x00000001 -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - /* Rounded Multiword DMA timings * * I gave up finding a generic formula for all controller @@ -413,8 +408,6 @@ static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq); static void pmac_ide_selectproc(ide_drive_t *drive); static void pmac_ide_kauai_selectproc(ide_drive_t *drive); -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ - #define PMAC_IDE_REG(x) \ ((void __iomem *)((drive)->hwif->io_ports.data_addr + (x))) @@ -584,8 +577,6 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) pmac_ide_do_update_timings(drive); } -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - /* * Calculate KeyLargo ATA/66 UDMA timings */ @@ -786,7 +777,6 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, drive->name, speed & 0xf, *timings); #endif } -#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) { @@ -804,7 +794,6 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) tl[0] = *timings; tl[1] = *timings2; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC if (speed >= XFER_UDMA_0) { if (pmif->kind == controller_kl_ata4) ret = set_timings_udma_ata4(&tl[0], speed); @@ -817,7 +806,7 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) ret = -1; } else set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed); -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + if (ret) return; @@ -1008,9 +997,7 @@ static const struct ide_port_info pmac_port_info = { .chipset = ide_pmac, .tp_ops = &pmac_tp_ops, .port_ops = &pmac_ide_port_ops, -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC .dma_ops = &pmac_dma_ops, -#endif .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | IDE_HFLAG_POST_SET_MODE | IDE_HFLAG_MMIO | @@ -1182,7 +1169,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) pmif->regbase = regbase; pmif->irq = irq; pmif->kauai_fcr = NULL; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + if (macio_resource_count(mdev) >= 2) { if (macio_request_resource(mdev, 1, "ide-pmac (dma)")) printk(KERN_WARNING "ide-pmac: can't request DMA " @@ -1192,7 +1179,7 @@ pmac_ide_macio_attach(struct macio_dev *mdev, const struct of_device_id *match) pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000); } else pmif->dma_regs = NULL; -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + dev_set_drvdata(&mdev->ofdev.dev, pmif); memset(&hw, 0, sizeof(hw)); @@ -1300,9 +1287,7 @@ pmac_ide_pci_attach(struct pci_dev *pdev, const struct pci_device_id *id) base = ioremap(rbase, rlen); pmif->regbase = (unsigned long) base + 0x2000; -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC pmif->dma_regs = base + 0x1000; -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ pmif->kauai_fcr = base; pmif->irq = pdev->irq; @@ -1434,8 +1419,6 @@ out: return error; } -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - /* * pmac_ide_build_dmatable builds the DBDMA command list * for a transfer and sets the DBDMA channel to point to it. @@ -1723,13 +1706,6 @@ static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, return 0; } -#else -static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif, - const struct ide_port_info *d) -{ - return -EOPNOTSUPP; -} -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ module_init(pmac_ide_probe); diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c index 7defa0ae201..a687a7dfea6 100644 --- a/drivers/ide/sgiioc4.c +++ b/drivers/ide/sgiioc4.c @@ -550,7 +550,7 @@ static const struct ide_dma_ops sgiioc4_dma_ops = { .dma_timeout = ide_dma_timeout, }; -static const struct ide_port_info sgiioc4_port_info __devinitdata = { +static const struct ide_port_info sgiioc4_port_info __devinitconst = { .name = DRV_NAME, .chipset = ide_pci, .init_dma = ide_dma_sgiioc4, @@ -633,7 +633,7 @@ out: return ret; } -int +int __devinit ioc4_ide_attach_one(struct ioc4_driver_data *idd) { /* PCI-RT does not bring out IDE connection. @@ -645,7 +645,7 @@ ioc4_ide_attach_one(struct ioc4_driver_data *idd) return pci_init_sgiioc4(idd->idd_pdev); } -static struct ioc4_submodule ioc4_ide_submodule = { +static struct ioc4_submodule __devinitdata ioc4_ide_submodule = { .is_name = "IOC4_ide", .is_owner = THIS_MODULE, .is_probe = ioc4_ide_attach_one, diff --git a/drivers/ieee1394/highlevel.c b/drivers/ieee1394/highlevel.c index 918ffc4fc8a..272543a42a4 100644 --- a/drivers/ieee1394/highlevel.c +++ b/drivers/ieee1394/highlevel.c @@ -46,10 +46,6 @@ static DEFINE_RWLOCK(hl_irqs_lock); static DEFINE_RWLOCK(addr_space_lock); -/* addr_space list will have zero and max already included as bounds */ -static struct hpsb_address_ops dummy_ops = { NULL, NULL, NULL, NULL }; -static struct hpsb_address_serve dummy_zero_addr, dummy_max_addr; - static struct hl_host_info *hl_get_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host) @@ -481,20 +477,23 @@ int hpsb_unregister_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host, return retval; } +static struct hpsb_address_ops dummy_ops; + +/* dummy address spaces as lower and upper bounds of the host's a.s. list */ static void init_hpsb_highlevel(struct hpsb_host *host) { - INIT_LIST_HEAD(&dummy_zero_addr.host_list); - INIT_LIST_HEAD(&dummy_zero_addr.hl_list); - INIT_LIST_HEAD(&dummy_max_addr.host_list); - INIT_LIST_HEAD(&dummy_max_addr.hl_list); + INIT_LIST_HEAD(&host->dummy_zero_addr.host_list); + INIT_LIST_HEAD(&host->dummy_zero_addr.hl_list); + INIT_LIST_HEAD(&host->dummy_max_addr.host_list); + INIT_LIST_HEAD(&host->dummy_max_addr.hl_list); - dummy_zero_addr.op = dummy_max_addr.op = &dummy_ops; + host->dummy_zero_addr.op = host->dummy_max_addr.op = &dummy_ops; - dummy_zero_addr.start = dummy_zero_addr.end = 0; - dummy_max_addr.start = dummy_max_addr.end = ((u64) 1) << 48; + host->dummy_zero_addr.start = host->dummy_zero_addr.end = 0; + host->dummy_max_addr.start = host->dummy_max_addr.end = ((u64) 1) << 48; - list_add_tail(&dummy_zero_addr.host_list, &host->addr_space); - list_add_tail(&dummy_max_addr.host_list, &host->addr_space); + list_add_tail(&host->dummy_zero_addr.host_list, &host->addr_space); + list_add_tail(&host->dummy_max_addr.host_list, &host->addr_space); } void highlevel_add_host(struct hpsb_host *host) diff --git a/drivers/ieee1394/hosts.h b/drivers/ieee1394/hosts.h index e4e8aeb4d77..dd229950acc 100644 --- a/drivers/ieee1394/hosts.h +++ b/drivers/ieee1394/hosts.h @@ -13,6 +13,7 @@ struct module; #include "ieee1394_types.h" #include "csr.h" +#include "highlevel.h" struct hpsb_packet; struct hpsb_iso; @@ -72,6 +73,9 @@ struct hpsb_host { struct { DECLARE_BITMAP(map, 64); } tl_pool[ALL_NODES]; struct csr_control csr; + + struct hpsb_address_serve dummy_zero_addr; + struct hpsb_address_serve dummy_max_addr; }; enum devctl_cmd { diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index 9e39f73282e..d333ae22459 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -1685,6 +1685,7 @@ static int nodemgr_host_thread(void *data) g = get_hpsb_generation(host); for (i = 0; i < 4 ; i++) { msleep_interruptible(63); + try_to_freeze(); if (kthread_should_stop()) goto exit; @@ -1725,6 +1726,7 @@ static int nodemgr_host_thread(void *data) /* Sleep 3 seconds */ for (i = 3000/200; i; i--) { msleep_interruptible(200); + try_to_freeze(); if (kthread_should_stop()) goto exit; diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index c52f6e6e8af..a373c18cf7b 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -402,6 +402,11 @@ static const struct { }, /* iPod mini */ { .firmware_revision = 0x0a2700, + .model_id = 0x000022, + .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, + }, + /* iPod mini */ { + .firmware_revision = 0x0a2700, .model_id = 0x000023, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, @@ -890,12 +895,13 @@ static void sbp2_host_reset(struct hpsb_host *host) return; read_lock_irqsave(&sbp2_hi_logical_units_lock, flags); + list_for_each_entry(lu, &hi->logical_units, lu_list) - if (likely(atomic_read(&lu->state) != - SBP2LU_STATE_IN_SHUTDOWN)) { - atomic_set(&lu->state, SBP2LU_STATE_IN_RESET); + if (atomic_cmpxchg(&lu->state, + SBP2LU_STATE_RUNNING, SBP2LU_STATE_IN_RESET) + == SBP2LU_STATE_RUNNING) scsi_block_requests(lu->shost); - } + read_unlock_irqrestore(&sbp2_hi_logical_units_lock, flags); } diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h index 4df887af66a..7fc35cf0cdd 100644 --- a/drivers/infiniband/hw/ehca/ehca_classes.h +++ b/drivers/infiniband/hw/ehca/ehca_classes.h @@ -163,7 +163,8 @@ struct ehca_mod_qp_parm { /* struct for tracking if cqes have been reported to the application */ struct ehca_qmap_entry { u16 app_wr_id; - u16 reported; + u8 reported; + u8 cqe_req; }; struct ehca_queue_map { @@ -171,6 +172,7 @@ struct ehca_queue_map { unsigned int entries; unsigned int tail; unsigned int left_to_poll; + unsigned int next_wqe_idx; /* Idx to first wqe to be flushed */ }; struct ehca_qp { diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index bb02a86aa52..bec7e024935 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -994,8 +994,7 @@ static int ehca_mem_notifier(struct notifier_block *nb, if (printk_timed_ratelimit(&ehca_dmem_warn_time, 30 * 1000)) ehca_gen_err("DMEM operations are not allowed" - "as long as an ehca adapter is" - "attached to the LPAR"); + "in conjunction with eHCA"); return NOTIFY_BAD; } } diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index 9e05ee2db39..cadbf0cdd91 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -435,9 +435,13 @@ static void reset_queue_map(struct ehca_queue_map *qmap) { int i; - qmap->tail = 0; - for (i = 0; i < qmap->entries; i++) + qmap->tail = qmap->entries - 1; + qmap->left_to_poll = 0; + qmap->next_wqe_idx = 0; + for (i = 0; i < qmap->entries; i++) { qmap->map[i].reported = 1; + qmap->map[i].cqe_req = 0; + } } /* @@ -1121,6 +1125,7 @@ static int calc_left_cqes(u64 wqe_p, struct ipz_queue *ipz_queue, void *wqe_v; u64 q_ofs; u32 wqe_idx; + unsigned int tail_idx; /* convert real to abs address */ wqe_p = wqe_p & (~(1UL << 63)); @@ -1133,12 +1138,17 @@ static int calc_left_cqes(u64 wqe_p, struct ipz_queue *ipz_queue, return -EFAULT; } + tail_idx = (qmap->tail + 1) % qmap->entries; wqe_idx = q_ofs / ipz_queue->qe_size; - if (wqe_idx < qmap->tail) - qmap->left_to_poll = (qmap->entries - qmap->tail) + wqe_idx; - else - qmap->left_to_poll = wqe_idx - qmap->tail; + /* check all processed wqes, whether a cqe is requested or not */ + while (tail_idx != wqe_idx) { + if (qmap->map[tail_idx].cqe_req) + qmap->left_to_poll++; + tail_idx = (tail_idx + 1) % qmap->entries; + } + /* save index in queue, where we have to start flushing */ + qmap->next_wqe_idx = wqe_idx; return 0; } @@ -1185,10 +1195,14 @@ static int check_for_left_cqes(struct ehca_qp *my_qp, struct ehca_shca *shca) } else { spin_lock_irqsave(&my_qp->send_cq->spinlock, flags); my_qp->sq_map.left_to_poll = 0; + my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) % + my_qp->sq_map.entries; spin_unlock_irqrestore(&my_qp->send_cq->spinlock, flags); spin_lock_irqsave(&my_qp->recv_cq->spinlock, flags); my_qp->rq_map.left_to_poll = 0; + my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) % + my_qp->rq_map.entries; spin_unlock_irqrestore(&my_qp->recv_cq->spinlock, flags); } diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index 64928079eaf..00a648f4316 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -179,6 +179,7 @@ static inline int ehca_write_swqe(struct ehca_qp *qp, qmap_entry->app_wr_id = get_app_wr_id(send_wr->wr_id); qmap_entry->reported = 0; + qmap_entry->cqe_req = 0; switch (send_wr->opcode) { case IB_WR_SEND: @@ -203,8 +204,10 @@ static inline int ehca_write_swqe(struct ehca_qp *qp, if ((send_wr->send_flags & IB_SEND_SIGNALED || qp->init_attr.sq_sig_type == IB_SIGNAL_ALL_WR) - && !hidden) + && !hidden) { wqe_p->wr_flag |= WQE_WRFLAG_REQ_SIGNAL_COM; + qmap_entry->cqe_req = 1; + } if (send_wr->opcode == IB_WR_SEND_WITH_IMM || send_wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM) { @@ -569,6 +572,7 @@ static int internal_post_recv(struct ehca_qp *my_qp, qmap_entry = &my_qp->rq_map.map[rq_map_idx]; qmap_entry->app_wr_id = get_app_wr_id(cur_recv_wr->wr_id); qmap_entry->reported = 0; + qmap_entry->cqe_req = 1; wqe_cnt++; } /* eof for cur_recv_wr */ @@ -706,27 +710,34 @@ repoll: goto repoll; wc->qp = &my_qp->ib_qp; + qmap_tail_idx = get_app_wr_id(cqe->work_request_id); + if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT)) + /* We got a send completion. */ + qmap = &my_qp->sq_map; + else + /* We got a receive completion. */ + qmap = &my_qp->rq_map; + + /* advance the tail pointer */ + qmap->tail = qmap_tail_idx; + if (is_error) { /* * set left_to_poll to 0 because in error state, we will not * get any additional CQEs */ - ehca_add_to_err_list(my_qp, 1); + my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) % + my_qp->sq_map.entries; my_qp->sq_map.left_to_poll = 0; + ehca_add_to_err_list(my_qp, 1); + my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) % + my_qp->rq_map.entries; + my_qp->rq_map.left_to_poll = 0; if (HAS_RQ(my_qp)) ehca_add_to_err_list(my_qp, 0); - my_qp->rq_map.left_to_poll = 0; } - qmap_tail_idx = get_app_wr_id(cqe->work_request_id); - if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT)) - /* We got a send completion. */ - qmap = &my_qp->sq_map; - else - /* We got a receive completion. */ - qmap = &my_qp->rq_map; - qmap_entry = &qmap->map[qmap_tail_idx]; if (qmap_entry->reported) { ehca_warn(cq->device, "Double cqe on qp_num=%#x", @@ -738,10 +749,6 @@ repoll: wc->wr_id = replace_wr_id(cqe->work_request_id, qmap_entry->app_wr_id); qmap_entry->reported = 1; - /* this is a proper completion, we need to advance the tail pointer */ - if (++qmap->tail == qmap->entries) - qmap->tail = 0; - /* if left_to_poll is decremented to 0, add the QP to the error list */ if (qmap->left_to_poll > 0) { qmap->left_to_poll--; @@ -805,13 +812,14 @@ static int generate_flush_cqes(struct ehca_qp *my_qp, struct ib_cq *cq, else qmap = &my_qp->rq_map; - qmap_entry = &qmap->map[qmap->tail]; + qmap_entry = &qmap->map[qmap->next_wqe_idx]; while ((nr < num_entries) && (qmap_entry->reported == 0)) { /* generate flush CQE */ + memset(wc, 0, sizeof(*wc)); - offset = qmap->tail * ipz_queue->qe_size; + offset = qmap->next_wqe_idx * ipz_queue->qe_size; wqe = (struct ehca_wqe *)ipz_qeit_calc(ipz_queue, offset); if (!wqe) { ehca_err(cq->device, "Invalid wqe offset=%#lx on " @@ -850,11 +858,12 @@ static int generate_flush_cqes(struct ehca_qp *my_qp, struct ib_cq *cq, wc->qp = &my_qp->ib_qp; - /* mark as reported and advance tail pointer */ + /* mark as reported and advance next_wqe pointer */ qmap_entry->reported = 1; - if (++qmap->tail == qmap->entries) - qmap->tail = 0; - qmap_entry = &qmap->map[qmap->tail]; + qmap->next_wqe_idx++; + if (qmap->next_wqe_idx == qmap->entries) + qmap->next_wqe_idx = 0; + qmap_entry = &qmap->map[qmap->next_wqe_idx]; wc++; nr++; } diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c index d0866a3636e..18308494a19 100644 --- a/drivers/infiniband/hw/mlx4/cq.c +++ b/drivers/infiniband/hw/mlx4/cq.c @@ -343,6 +343,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata) { struct mlx4_ib_dev *dev = to_mdev(ibcq->device); struct mlx4_ib_cq *cq = to_mcq(ibcq); + struct mlx4_mtt mtt; int outst_cqe; int err; @@ -376,10 +377,13 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata) goto out; } + mtt = cq->buf.mtt; + err = mlx4_cq_resize(dev->dev, &cq->mcq, entries, &cq->resize_buf->buf.mtt); if (err) goto err_buf; + mlx4_mtt_cleanup(dev->dev, &mtt); if (ibcq->uobject) { cq->buf = cq->resize_buf->buf; cq->ibcq.cqe = cq->resize_buf->cqe; @@ -406,6 +410,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata) goto out; err_buf: + mlx4_mtt_cleanup(dev->dev, &cq->resize_buf->buf.mtt); if (!ibcq->uobject) mlx4_ib_free_cq_buf(dev, &cq->resize_buf->buf, cq->resize_buf->cqe); diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c index 6790e975a98..bc4e40f3ede 100644 --- a/drivers/input/ff-memless.c +++ b/drivers/input/ff-memless.c @@ -397,8 +397,9 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) { struct ml_device *ml = dev->ff->private; struct ml_effect_state *state = &ml->states[effect_id]; + unsigned long flags; - spin_lock_bh(&ml->timer_lock); + spin_lock_irqsave(&ml->timer_lock, flags); if (value > 0) { debug("initiated play"); @@ -424,7 +425,7 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) ml_play_effects(ml); } - spin_unlock_bh(&ml->timer_lock); + spin_unlock_irqrestore(&ml->timer_lock, flags); return 0; } diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 22016ca1535..379b7ff354e 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -824,7 +824,7 @@ static void atkbd_disconnect(struct serio *serio) atkbd_disable(atkbd); /* make sure we don't have a command in flight */ - flush_scheduled_work(); + cancel_delayed_work_sync(&atkbd->event_work); sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group); input_unregister_device(atkbd->dev); @@ -868,6 +868,22 @@ static void atkbd_hp_keymap_fixup(struct atkbd *atkbd) } /* + * Inventec system with broken key release on volume keys + */ +static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd) +{ + const unsigned int forced_release_keys[] = { + 0xae, 0xb0, + }; + int i; + + if (atkbd->set == 2) + for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++) + __set_bit(forced_release_keys[i], + atkbd->force_release_mask); +} + +/* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set */ @@ -1468,6 +1484,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_fixup, .driver_data = atkbd_hp_keymap_fixup, }, + { + .ident = "Inventec Symphony", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"), + DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"), + }, + .callback = atkbd_setup_fixup, + .driver_data = atkbd_inventec_keymap_fixup, + }, { } }; diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index 69e674ecf19..db22fd9b4cf 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -101,7 +101,7 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id) if (cpu_is_omap24xx()) { int i; for (i = 0; i < omap_kp->rows; i++) - disable_irq(OMAP_GPIO_IRQ(row_gpios[i])); + disable_irq(gpio_to_irq(row_gpios[i])); } else /* disable keyboard interrupt and schedule for handling */ omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); @@ -224,7 +224,7 @@ static void omap_kp_tasklet(unsigned long data) if (cpu_is_omap24xx()) { int i; for (i = 0; i < omap_kp_data->rows; i++) - enable_irq(OMAP_GPIO_IRQ(row_gpios[i])); + enable_irq(gpio_to_irq(row_gpios[i])); } else { omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); kp_cur_group = -1; @@ -397,7 +397,7 @@ static int __init omap_kp_probe(struct platform_device *pdev) omap_writew(0, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); } else { for (irq_idx = 0; irq_idx < omap_kp->rows; irq_idx++) { - if (request_irq(OMAP_GPIO_IRQ(row_gpios[irq_idx]), + if (request_irq(gpio_to_irq(row_gpios[irq_idx]), omap_kp_interrupt, IRQF_TRIGGER_FALLING, "omap-keypad", omap_kp) < 0) @@ -438,7 +438,7 @@ static int omap_kp_remove(struct platform_device *pdev) gpio_free(col_gpios[i]); for (i = 0; i < omap_kp->rows; i++) { gpio_free(row_gpios[i]); - free_irq(OMAP_GPIO_IRQ(row_gpios[i]), 0); + free_irq(gpio_to_irq(row_gpios[i]), 0); } } else { omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT); diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 6d30c6d334c..0d2fc64a5e1 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -475,7 +475,7 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) goto failed_free_mem; } - keypad->clk = clk_get(&pdev->dev, "KBDCLK"); + keypad->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(keypad->clk)) { dev_err(&pdev->dev, "failed to get keypad clock\n"); error = PTR_ERR(keypad->clk); diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c index bce160f4349..86457feccfc 100644 --- a/drivers/input/misc/cm109.c +++ b/drivers/input/misc/cm109.c @@ -42,7 +42,7 @@ static char *phone = "kip1000"; module_param(phone, charp, S_IRUSR); -MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}"); +MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}"); enum { /* HID Registers */ @@ -258,6 +258,37 @@ static unsigned short keymap_usbph01(int scancode) } } +/* + * Keymap for ATCom AU-100 + * http://www.atcom.cn/En_products_AU100.html + * http://www.packetizer.com/products/au100/ + * http://www.voip-info.org/wiki/view/AU-100 + * + * Contributed by daniel@gimpelevich.san-francisco.ca.us + */ +static unsigned short keymap_atcom(int scancode) +{ + switch (scancode) { /* phone key: */ + case 0x82: return KEY_NUMERIC_0; /* 0 */ + case 0x11: return KEY_NUMERIC_1; /* 1 */ + case 0x12: return KEY_NUMERIC_2; /* 2 */ + case 0x14: return KEY_NUMERIC_3; /* 3 */ + case 0x21: return KEY_NUMERIC_4; /* 4 */ + case 0x22: return KEY_NUMERIC_5; /* 5 */ + case 0x24: return KEY_NUMERIC_6; /* 6 */ + case 0x41: return KEY_NUMERIC_7; /* 7 */ + case 0x42: return KEY_NUMERIC_8; /* 8 */ + case 0x44: return KEY_NUMERIC_9; /* 9 */ + case 0x84: return KEY_NUMERIC_POUND; /* # */ + case 0x81: return KEY_NUMERIC_STAR; /* * */ + case 0x18: return KEY_ENTER; /* pickup */ + case 0x28: return KEY_ESC; /* hangup */ + case 0x48: return KEY_LEFT; /* left arrow */ + case 0x88: return KEY_RIGHT; /* right arrow */ + default: return special_keymap(scancode); + } +} + static unsigned short (*keymap)(int) = keymap_kip1000; /* @@ -840,6 +871,10 @@ static int __init cm109_select_keymap(void) keymap = keymap_usbph01; printk(KERN_INFO KBUILD_MODNAME ": " "Keymap for Allied-Telesis Corega USBPH01 phone loaded\n"); + } else if (!strcasecmp(phone, "atcom")) { + keymap = keymap_atcom; + printk(KERN_INFO KBUILD_MODNAME ": " + "Keymap for ATCom AU-100 phone loaded\n"); } else { printk(KERN_ERR KBUILD_MODNAME ": " "Unsupported phone: %s\n", phone); diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index e82d34201e9..88f04bf2ad6 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -125,7 +125,7 @@ static void hgpk_spewing_hack(struct psmouse *psmouse, */ static int hgpk_validate_byte(unsigned char *packet) { - return (packet[0] & 0x0C) == 0x08; + return (packet[0] & 0x0C) != 0x08; } static void hgpk_process_packet(struct psmouse *psmouse) diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index 27d70d326ff..da3c3a5d268 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -79,7 +79,7 @@ config SERIO_PARKBD config SERIO_RPCKBD tristate "Acorn RiscPC keyboard controller" - depends on ARCH_ACORN || ARCH_CLPS7500 + depends on ARCH_ACORN default y help Say Y here if you have the Acorn RiscPC and want to use an AT diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index eec375cd10e..29e686388a2 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -337,6 +337,20 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "2656"), }, }, + { + .ident = "Dell XPS M1530", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"), + }, + }, + { + .ident = "Compal HEL80I", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"), + DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"), + }, + }, { } }; diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index ca62ec639f8..677680e9f54 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -66,6 +66,7 @@ * - Support Intuos3 4x6 * v1.47 (pc) - Added support for Bamboo * v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX + * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A) */ /* @@ -86,7 +87,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.48" +#define DRIVER_VERSION "v1.49" #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>" #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" #define DRIVER_LICENSE "GPL" @@ -103,15 +104,15 @@ struct wacom { struct usb_device *usbdev; struct usb_interface *intf; struct urb *irq; - struct wacom_wac * wacom_wac; + struct wacom_wac *wacom_wac; struct mutex lock; unsigned int open:1; char phys[32]; }; struct wacom_combo { - struct wacom * wacom; - struct urb * urb; + struct wacom *wacom; + struct urb *urb; }; extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo); @@ -132,7 +133,7 @@ extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wa extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac); extern __u16 wacom_le16_to_cpu(unsigned char *data); extern __u16 wacom_be16_to_cpu(unsigned char *data); -extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id); -extern const struct usb_device_id * get_device_table(void); +extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id); +extern const struct usb_device_id *get_device_table(void); #endif diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 09e227aa0d4..484496daa0f 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -14,8 +14,41 @@ #include "wacom.h" #include "wacom_wac.h" +/* defines to get HID report descriptor */ +#define HID_DEVICET_HID (USB_TYPE_CLASS | 0x01) +#define HID_DEVICET_REPORT (USB_TYPE_CLASS | 0x02) +#define HID_USAGE_UNDEFINED 0x00 +#define HID_USAGE_PAGE 0x05 +#define HID_USAGE_PAGE_DIGITIZER 0x0d +#define HID_USAGE_PAGE_DESKTOP 0x01 +#define HID_USAGE 0x09 +#define HID_USAGE_X 0x30 +#define HID_USAGE_Y 0x31 +#define HID_USAGE_X_TILT 0x3d +#define HID_USAGE_Y_TILT 0x3e +#define HID_USAGE_FINGER 0x22 +#define HID_USAGE_STYLUS 0x20 +#define HID_COLLECTION 0xc0 + +enum { + WCM_UNDEFINED = 0, + WCM_DESKTOP, + WCM_DIGITIZER, +}; + +struct hid_descriptor { + struct usb_descriptor_header header; + __le16 bcdHID; + u8 bCountryCode; + u8 bNumDescriptors; + u8 bDescriptorType; + __le16 wDescriptorLength; +} __attribute__ ((packed)); + +/* defines to get/set USB message */ #define USB_REQ_GET_REPORT 0x01 #define USB_REQ_SET_REPORT 0x09 +#define WAC_HID_FEATURE_REPORT 0x03 static int usb_get_report(struct usb_interface *intf, unsigned char type, unsigned char id, void *buf, int size) @@ -80,25 +113,21 @@ static void wacom_sys_irq(struct urb *urb) void wacom_report_key(void *wcombo, unsigned int key_type, int key_data) { input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data); - return; } void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data) { input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data); - return; } void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data) { input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data); - return; } void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value) { input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value); - return; } __u16 wacom_be16_to_cpu(unsigned char *data) @@ -118,7 +147,6 @@ __u16 wacom_le16_to_cpu(unsigned char *data) void wacom_input_sync(void *wcombo) { input_sync(get_input_dev((struct wacom_combo *)wcombo)); - return; } static int wacom_open(struct input_dev *dev) @@ -160,7 +188,7 @@ static void wacom_close(struct input_dev *dev) void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_1) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_1) | BIT_MASK(BTN_5); input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); } @@ -170,7 +198,7 @@ void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac) input_dev->evbit[0] |= BIT_MASK(EV_MSC); input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) | BIT_MASK(BTN_4); } @@ -178,7 +206,7 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { input_dev->evbit[0] |= BIT_MASK(EV_REL); input_dev->relbit[0] |= BIT_MASK(REL_WHEEL); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) | + input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) | BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2); @@ -188,7 +216,7 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac) void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) | BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3); input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); @@ -196,14 +224,14 @@ void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac) void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_4) | + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) | BIT_MASK(BTN_5) | BIT_MASK(BTN_6) | BIT_MASK(BTN_7); input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); } void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9); + input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9); } void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) @@ -211,7 +239,7 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL); input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL); input_dev->relbit[0] |= BIT_MASK(REL_WHEEL); - input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) | + input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) | @@ -228,8 +256,7 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac) void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { - input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2) | - BIT_MASK(BTN_TOOL_RUBBER); + input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2); } void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac) @@ -237,15 +264,129 @@ void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac) input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER); } +static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc, + struct wacom_wac *wacom_wac) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct wacom_features *features = wacom_wac->features; + char limit = 0, result = 0; + int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0; + unsigned char *report; + + report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL); + if (!report) + return -ENOMEM; + + /* retrive report descriptors */ + do { + result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + USB_REQ_GET_DESCRIPTOR, + USB_RECIP_INTERFACE | USB_DIR_IN, + HID_DEVICET_REPORT << 8, + intf->altsetting[0].desc.bInterfaceNumber, /* interface */ + report, + hid_desc->wDescriptorLength, + 5000); /* 5 secs */ + } while (result < 0 && limit++ < 5); + + if (result < 0) + goto out; + + for (i = 0; i < hid_desc->wDescriptorLength; i++) { + + switch (report[i]) { + case HID_USAGE_PAGE: + switch (report[i + 1]) { + case HID_USAGE_PAGE_DIGITIZER: + usage = WCM_DIGITIZER; + i++; + break; + + case HID_USAGE_PAGE_DESKTOP: + usage = WCM_DESKTOP; + i++; + break; + } + break; + + case HID_USAGE: + switch (report[i + 1]) { + case HID_USAGE_X: + if (usage == WCM_DESKTOP) { + if (finger) { + features->touch_x_max = + features->touch_y_max = + wacom_le16_to_cpu(&report[i + 3]); + features->x_max = + wacom_le16_to_cpu(&report[i + 6]); + i += 7; + } else if (pen) { + features->x_max = + wacom_le16_to_cpu(&report[i + 3]); + i += 4; + } + } else if (usage == WCM_DIGITIZER) { + /* max pressure isn't reported + features->pressure_max = (unsigned short) + (report[i+4] << 8 | report[i + 3]); + */ + features->pressure_max = 255; + i += 4; + } + break; + + case HID_USAGE_Y: + if (usage == WCM_DESKTOP) + features->y_max = + wacom_le16_to_cpu(&report[i + 3]); + i += 4; + break; + + case HID_USAGE_FINGER: + finger = 1; + i++; + break; + + case HID_USAGE_STYLUS: + pen = 1; + i++; + break; + + case HID_USAGE_UNDEFINED: + if (usage == WCM_DESKTOP && finger) /* capacity */ + features->pressure_max = + wacom_le16_to_cpu(&report[i + 3]); + i += 4; + break; + } + break; + + case HID_COLLECTION: + /* reset UsagePage ans Finger */ + finger = usage = 0; + break; + } + } + + result = 0; + + out: + kfree(report); + return result; +} + static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *dev = interface_to_usbdev(intf); + struct usb_host_interface *interface = intf->cur_altsetting; struct usb_endpoint_descriptor *endpoint; struct wacom *wacom; struct wacom_wac *wacom_wac; + struct wacom_features *features; struct input_dev *input_dev; int error = -ENOMEM; char rep_data[2], limit = 0; + struct hid_descriptor *hid_desc; wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL); wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL); @@ -268,8 +409,8 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i usb_make_path(dev, wacom->phys, sizeof(wacom->phys)); strlcat(wacom->phys, "/input0", sizeof(wacom->phys)); - wacom_wac->features = get_wacom_feature(id); - BUG_ON(wacom_wac->features->pktlen > 10); + wacom_wac->features = features = get_wacom_feature(id); + BUG_ON(features->pktlen > 10); input_dev->name = wacom_wac->features->name; wacom->wacom_wac = wacom_wac; @@ -282,18 +423,37 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i input_dev->open = wacom_open; input_dev->close = wacom_close; + endpoint = &intf->cur_altsetting->endpoint[0].desc; + + /* TabletPC need to retrieve the physical and logical maximum from report descriptor */ + if (wacom_wac->features->type == TABLETPC) { + if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) { + if (usb_get_extra_descriptor(&interface->endpoint[0], + HID_DEVICET_REPORT, &hid_desc)) { + printk("wacom: can not retrive extra class descriptor\n"); + goto fail2; + } + } + error = wacom_parse_hid(intf, hid_desc, wacom_wac); + if (error) + goto fail2; + } + input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) | BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS); - input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0); - input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0); + input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0); + input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0); + if (features->type == TABLETPC) { + input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP); + input_set_abs_params(input_dev, ABS_RX, 0, features->touch_x_max, 4, 0); + input_set_abs_params(input_dev, ABS_RY, 0, features->touch_y_max, 4, 0); + } input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC); wacom_init_input_dev(input_dev, wacom_wac); - endpoint = &intf->cur_altsetting->endpoint[0].desc; - usb_fill_int_urb(wacom->irq, dev, usb_rcvintpipe(dev, endpoint->bEndpointAddress), wacom_wac->data, wacom_wac->features->pktlen, @@ -305,13 +465,22 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i if (error) goto fail3; - /* Ask the tablet to report tablet data. Repeat until it succeeds */ - do { - rep_data[0] = 2; - rep_data[1] = 2; - usb_set_report(intf, 3, 2, rep_data, 2); - usb_get_report(intf, 3, 2, rep_data, 2); - } while (rep_data[1] != 2 && limit++ < 5); + /* + * Ask the tablet to report tablet data if it is not a Tablet PC. + * Repeat until it succeeds + */ + if (wacom_wac->features->type != TABLETPC) { + do { + rep_data[0] = 2; + rep_data[1] = 2; + error = usb_set_report(intf, WAC_HID_FEATURE_REPORT, + 2, rep_data, 2); + if (error >= 0) + error = usb_get_report(intf, + WAC_HID_FEATURE_REPORT, 2, + rep_data, 2); + } while ((error < 0 || rep_data[1] != 2) && limit++ < 5); + } usb_set_intfdata(intf, wacom); return 0; @@ -333,7 +502,8 @@ static void wacom_disconnect(struct usb_interface *intf) usb_kill_urb(wacom->irq); input_unregister_device(wacom->dev); usb_free_urb(wacom->irq); - usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma); + usb_buffer_free(interface_to_usbdev(intf), 10, + wacom->wacom_wac->data, wacom->data_dma); kfree(wacom->wacom_wac); kfree(wacom); } diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index bf3d9a8b2c1..8dc8d1e59be 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -535,31 +535,147 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) return 1; } +int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo) +{ + char *data = wacom->data; + int prox = 0, pressure; + static int stylusInProx, touchInProx = 1, touchOut; + struct urb *urb = ((struct wacom_combo *)wcombo)->urb; + + dbg("wacom_tpc_irq: received report #%d", data[0]); + + if (urb->actual_length == 5 || data[0] == 6) { /* Touch data */ + if (urb->actual_length == 5) { /* with touch */ + prox = data[0] & 0x03; + } else { /* with capacity */ + prox = data[1] & 0x03; + } + + if (!stylusInProx) { /* stylus not in prox */ + if (prox) { + if (touchInProx) { + wacom->tool[1] = BTN_TOOL_DOUBLETAP; + wacom->id[0] = TOUCH_DEVICE_ID; + if (urb->actual_length != 5) { + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4])); + wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6])); + wacom_report_key(wcombo, BTN_TOUCH, wacom_le16_to_cpu(&data[6])); + } else { + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3])); + wacom_report_key(wcombo, BTN_TOUCH, 1); + } + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + wacom_report_key(wcombo, wacom->tool[1], prox & 0x01); + touchOut = 1; + return 1; + } + } else { + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + wacom_report_key(wcombo, wacom->tool[1], prox & 0x01); + wacom_report_key(wcombo, BTN_TOUCH, 0); + touchOut = 0; + touchInProx = 1; + return 1; + } + } else if (touchOut || !prox) { /* force touch out-prox */ + wacom_report_abs(wcombo, ABS_MISC, TOUCH_DEVICE_ID); + wacom_report_key(wcombo, BTN_TOUCH, 0); + touchOut = 0; + touchInProx = 1; + return 1; + } + } else if (data[0] == 2) { /* Penabled */ + prox = data[1] & 0x20; + + touchInProx = 0; + + wacom->id[0] = ERASER_DEVICE_ID; + + /* + * if going from out of proximity into proximity select between the eraser + * and the pen based on the state of the stylus2 button, choose eraser if + * pressed else choose pen. if not a proximity change from out to in, send + * an out of proximity for previous tool then a in for new tool. + */ + if (prox) { /* in prox */ + if (!wacom->tool[0]) { + /* Going into proximity select tool */ + wacom->tool[1] = (data[1] & 0x08) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; + if (wacom->tool[1] == BTN_TOOL_PEN) + wacom->id[0] = STYLUS_DEVICE_ID; + } else if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[1] & 0x08)) { + /* + * was entered with stylus2 pressed + * report out proximity for previous tool + */ + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + wacom_report_key(wcombo, wacom->tool[1], 0); + wacom_input_sync(wcombo); + + /* set new tool */ + wacom->tool[1] = BTN_TOOL_PEN; + wacom->id[0] = STYLUS_DEVICE_ID; + return 0; + } + if (wacom->tool[1] != BTN_TOOL_RUBBER) { + /* Unknown tool selected default to pen tool */ + wacom->tool[1] = BTN_TOOL_PEN; + wacom->id[0] = STYLUS_DEVICE_ID; + } + wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02); + wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10); + wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2])); + wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4])); + pressure = ((data[7] & 0x01) << 8) | data[6]; + if (pressure < 0) + pressure = wacom->features->pressure_max + pressure + 1; + wacom_report_abs(wcombo, ABS_PRESSURE, pressure); + wacom_report_key(wcombo, BTN_TOUCH, pressure); + } else { + wacom_report_abs(wcombo, ABS_PRESSURE, 0); + wacom_report_key(wcombo, BTN_STYLUS, 0); + wacom_report_key(wcombo, BTN_STYLUS2, 0); + wacom_report_key(wcombo, BTN_TOUCH, 0); + } + wacom_report_key(wcombo, wacom->tool[1], prox); + wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); + stylusInProx = prox; + wacom->tool[0] = prox; + return 1; + } + return 0; +} + int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo) { switch (wacom_wac->features->type) { case PENPARTNER: - return (wacom_penpartner_irq(wacom_wac, wcombo)); - break; + return wacom_penpartner_irq(wacom_wac, wcombo); + case PL: - return (wacom_pl_irq(wacom_wac, wcombo)); - break; + return wacom_pl_irq(wacom_wac, wcombo); + case WACOM_G4: case GRAPHIRE: case WACOM_MO: - return (wacom_graphire_irq(wacom_wac, wcombo)); - break; + return wacom_graphire_irq(wacom_wac, wcombo); + case PTU: - return (wacom_ptu_irq(wacom_wac, wcombo)); - break; + return wacom_ptu_irq(wacom_wac, wcombo); + case INTUOS: case INTUOS3S: case INTUOS3: case INTUOS3L: case CINTIQ: case WACOM_BEE: - return (wacom_intuos_irq(wacom_wac, wcombo)); - break; + return wacom_intuos_irq(wacom_wac, wcombo); + + case TABLETPC: + return wacom_tpc_irq(wacom_wac, wcombo); + default: return 0; } @@ -586,13 +702,15 @@ void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_w /* fall through */ case INTUOS3S: input_dev_i3s(input_dev, wacom_wac); + /* fall through */ case INTUOS: input_dev_i(input_dev, wacom_wac); break; case PL: case PTU: + case TABLETPC: input_dev_pl(input_dev, wacom_wac); - break; + /* fall through */ case PENPARTNER: input_dev_pt(input_dev, wacom_wac); break; @@ -611,6 +729,7 @@ static struct wacom_features wacom_features[] = { { "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 }, { "Wacom BambooFun 4x5", 9, 14760, 9225, 511, 63, WACOM_MO }, { "Wacom BambooFun 6x8", 9, 21648, 13530, 511, 63, WACOM_MO }, + { "Wacom Bamboo1 Medium",8, 16704, 12064, 511, 63, GRAPHIRE }, { "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE }, { "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE }, { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE }, @@ -650,6 +769,10 @@ static struct wacom_features wacom_features[] = { { "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ }, { "Wacom Cintiq 20WSX", 10, 86680, 54180, 1023, 63, WACOM_BEE }, { "Wacom Cintiq 12WX", 10, 53020, 33440, 1023, 63, WACOM_BEE }, + { "Wacom DTU1931", 8, 37832, 30305, 511, 0, PL }, + { "Wacom ISDv4 90", 8, 26202, 16325, 255, 0, TABLETPC }, + { "Wacom ISDv4 93", 8, 26202, 16325, 255, 0, TABLETPC }, + { "Wacom ISDv4 9A", 8, 26202, 16325, 255, 0, TABLETPC }, { "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, { } }; @@ -665,6 +788,7 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) }, @@ -704,18 +828,26 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) }, { } }; -const struct usb_device_id * get_device_table(void) { - const struct usb_device_id * id_table = wacom_ids; +const struct usb_device_id *get_device_table(void) +{ + const struct usb_device_id *id_table = wacom_ids; + return id_table; } -struct wacom_features * get_wacom_feature(const struct usb_device_id * id) { +struct wacom_features * get_wacom_feature(const struct usb_device_id *id) +{ int index = id - wacom_ids; struct wacom_features *wf = &wacom_features[index]; + return wf; } diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index 3342bc05847..f9c8b69673b 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -10,6 +10,7 @@ #define WACOM_WAC_H #define STYLUS_DEVICE_ID 0x02 +#define TOUCH_DEVICE_ID 0x03 #define CURSOR_DEVICE_ID 0x06 #define ERASER_DEVICE_ID 0x0A #define PAD_DEVICE_ID 0x0F @@ -27,6 +28,7 @@ enum { CINTIQ, WACOM_BEE, WACOM_MO, + TABLETPC, MAX_TYPE }; @@ -38,6 +40,8 @@ struct wacom_features { int pressure_max; int distance_max; int type; + int touch_x_max; + int touch_y_max; }; struct wacom_wac { diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c index d20689cdbd5..8f38c5e55ce 100644 --- a/drivers/input/touchscreen/elo.c +++ b/drivers/input/touchscreen/elo.c @@ -262,7 +262,7 @@ static int elo_setup_10(struct elo *elo) input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0); printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, " - "features: %x02x, controller: 0x%02x\n", + "features: 0x%02x, controller: 0x%02x\n", elo_types[(packet[1] -'0') & 0x03], packet[5], packet[4], packet[3], packet[7]); diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c index 3ab6362f043..928d2ed8865 100644 --- a/drivers/input/xen-kbdfront.c +++ b/drivers/input/xen-kbdfront.c @@ -323,7 +323,7 @@ static struct xenbus_device_id xenkbd_ids[] = { { "" } }; -static struct xenbus_driver xenkbd = { +static struct xenbus_driver xenkbd_driver = { .name = "vkbd", .owner = THIS_MODULE, .ids = xenkbd_ids, @@ -342,12 +342,12 @@ static int __init xenkbd_init(void) if (xen_initial_domain()) return -ENODEV; - return xenbus_register_frontend(&xenkbd); + return xenbus_register_frontend(&xenkbd_driver); } static void __exit xenkbd_cleanup(void) { - xenbus_unregister_driver(&xenkbd); + xenbus_unregister_driver(&xenkbd_driver); } module_init(xenkbd_init); diff --git a/drivers/isdn/hardware/avm/b1isa.c b/drivers/isdn/hardware/avm/b1isa.c index 1e288eeb5e2..6461a32bc83 100644 --- a/drivers/isdn/hardware/avm/b1isa.c +++ b/drivers/isdn/hardware/avm/b1isa.c @@ -233,10 +233,8 @@ static void __exit b1isa_exit(void) int i; for (i = 0; i < MAX_CARDS; i++) { - if (!io[i]) - break; - - b1isa_remove(&isa_dev[i]); + if (isa_dev[i].resource[0].start) + b1isa_remove(&isa_dev[i]); } unregister_capi_driver(&capi_driver_b1isa); } diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c index 84d75a3f5d1..ded9d0baf60 100644 --- a/drivers/isdn/hisax/config.c +++ b/drivers/isdn/hisax/config.c @@ -1213,7 +1213,7 @@ static void HiSax_shiftcards(int idx) memcpy(&cards[i], &cards[i + 1], sizeof(cards[i])); } -static int HiSax_inithardware(int *busy_flag) +static int __init HiSax_inithardware(int *busy_flag) { int foundcards = 0; int i = 0; @@ -1542,7 +1542,9 @@ static void __exit HiSax_exit(void) printk(KERN_INFO "HiSax module removed\n"); } -int hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card) +#ifdef CONFIG_HOTPLUG + +int __devinit hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card) { u_char ids[16]; int ret = -1; @@ -1563,6 +1565,8 @@ error: } EXPORT_SYMBOL(hisax_init_pcmcia); +#endif + EXPORT_SYMBOL(HiSax_closecard); #include "hisax_if.h" @@ -1580,6 +1584,11 @@ static void hisax_bc_close(struct BCState *bcs); static void hisax_bh(struct work_struct *work); static void EChannel_proc_rcv(struct hisax_d_if *d_if); +static int hisax_setup_card_dynamic(struct IsdnCard *card) +{ + return 2; +} + int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[], char *name, int protocol) { @@ -1599,7 +1608,8 @@ int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[], cards[i].protocol = protocol; sprintf(id, "%s%d", name, i); nrcards++; - retval = checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card); + retval = checkcard(i, id, NULL, hisax_d_if->owner, + hisax_setup_card_dynamic); if (retval == 0) { // yuck cards[i].typ = 0; nrcards--; diff --git a/drivers/isdn/hysdn/hysdn_net.c b/drivers/isdn/hysdn/hysdn_net.c index cfa8fa5e44a..3f2a0a20c19 100644 --- a/drivers/isdn/hysdn/hysdn_net.c +++ b/drivers/isdn/hysdn/hysdn_net.c @@ -83,12 +83,12 @@ net_open(struct net_device *dev) /* Fill in the MAC-level header (if not already set) */ if (!card->mac_addr[0]) { - for (i = 0; i < ETH_ALEN - sizeof(unsigned long); i++) + for (i = 0; i < ETH_ALEN; i++) dev->dev_addr[i] = 0xfc; if ((in_dev = dev->ip_ptr) != NULL) { struct in_ifaddr *ifa = in_dev->ifa_list; if (ifa != NULL) - memcpy(dev->dev_addr + (ETH_ALEN - sizeof(unsigned long)), &ifa->ifa_local, sizeof(unsigned long)); + memcpy(dev->dev_addr + (ETH_ALEN - sizeof(ifa->ifa_local)), &ifa->ifa_local, sizeof(ifa->ifa_local)); } } else memcpy(dev->dev_addr, card->mac_addr, ETH_ALEN); diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c index 2c21d4f25cc..a98ab72adf9 100644 --- a/drivers/macintosh/rack-meter.c +++ b/drivers/macintosh/rack-meter.c @@ -288,7 +288,7 @@ static void __devexit rackmeter_stop_cpu_sniffer(struct rackmeter *rm) cancel_rearming_delayed_work(&rm->cpu[1].sniffer); } -static int rackmeter_setup(struct rackmeter *rm) +static int __devinit rackmeter_setup(struct rackmeter *rm) { pr_debug("rackmeter: setting up i2s..\n"); rackmeter_setup_i2s(rm); @@ -582,12 +582,12 @@ static struct of_device_id rackmeter_match[] = { { } }; -static struct macio_driver rackmeter_drv = { +static struct macio_driver rackmeter_driver = { .name = "rackmeter", .owner = THIS_MODULE, .match_table = rackmeter_match, .probe = rackmeter_probe, - .remove = rackmeter_remove, + .remove = __devexit_p(rackmeter_remove), .shutdown = rackmeter_shutdown, }; @@ -596,14 +596,14 @@ static int __init rackmeter_init(void) { pr_debug("rackmeter_init()\n"); - return macio_register_driver(&rackmeter_drv); + return macio_register_driver(&rackmeter_driver); } static void __exit rackmeter_exit(void) { pr_debug("rackmeter_exit()\n"); - macio_unregister_driver(&rackmeter_drv); + macio_unregister_driver(&rackmeter_driver); } module_init(rackmeter_init); diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index a63161aec48..04e5fd742c2 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -668,7 +668,7 @@ static void check_for_valid_limits(struct io_restrictions *rs) if (!rs->max_segment_size) rs->max_segment_size = MAX_SEGMENT_SIZE; if (!rs->seg_boundary_mask) - rs->seg_boundary_mask = -1; + rs->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK; if (!rs->bounce_pfn) rs->bounce_pfn = -1; } diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c index 14e627ef646..c1d92f838ca 100644 --- a/drivers/media/dvb/dm1105/dm1105.c +++ b/drivers/media/dvb/dm1105/dm1105.c @@ -376,7 +376,7 @@ static void dm1105dvb_dma_unmap(struct dm1105dvb *dm1105dvb) pci_free_consistent(dm1105dvb->pdev, 6*DM1105_DMA_BYTES, dm1105dvb->ts_buf, dm1105dvb->dma_addr); } -static void __devinit dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb) +static void dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb) { outb(INTMAK_ALLMASK, dm_io_mem(DM1105_INTMAK)); outb(1, dm_io_mem(DM1105_CR)); diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 8557bf12cfb..7a421e9dba5 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -585,6 +585,8 @@ restart: if (fe->ops.set_voltage) fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF); if (fe->ops.tuner_ops.sleep) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); fe->ops.tuner_ops.sleep(fe); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); @@ -934,7 +936,8 @@ void dtv_property_dump(struct dtv_property *tvp) int is_legacy_delivery_system(fe_delivery_system_t s) { if((s == SYS_UNDEFINED) || (s == SYS_DVBC_ANNEX_AC) || - (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS)) + (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS) || + (s == SYS_ATSC)) return 1; return 0; diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 847d8fdd9ec..e9ab0249d13 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -681,12 +681,6 @@ static int af9015_download_firmware(struct usb_device *udev, goto error; } - /* firmware is running, reconnect device in the usb bus */ - req.cmd = RECONNECT_USB; - ret = af9015_rw_udev(udev, &req); - if (ret) - err("reconnect failed: %d", ret); - error: return ret; } @@ -1208,6 +1202,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .usb_ctrl = DEVICE_SPECIFIC, .download_firmware = af9015_download_firmware, .firmware = "dvb-usb-af9015.fw", + .no_reconnect = 1, .size_of_priv = sizeof(struct af9015_state), \ @@ -1306,6 +1301,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .usb_ctrl = DEVICE_SPECIFIC, .download_firmware = af9015_download_firmware, .firmware = "dvb-usb-af9015.fw", + .no_reconnect = 1, .size_of_priv = sizeof(struct af9015_state), \ diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h index 739193943c1..8b544fe79b0 100644 --- a/drivers/media/dvb/dvb-usb/dib0700.h +++ b/drivers/media/dvb/dvb-usb/dib0700.h @@ -22,7 +22,7 @@ extern int dvb_usb_dib0700_debug; #define REQUEST_I2C_READ 0x2 #define REQUEST_I2C_WRITE 0x3 -#define REQUEST_POLL_RC 0x4 +#define REQUEST_POLL_RC 0x4 /* deprecated in firmware v1.20 */ #define REQUEST_JUMPRAM 0x8 #define REQUEST_SET_CLOCK 0xB #define REQUEST_SET_GPIO 0xC @@ -40,11 +40,14 @@ struct dib0700_state { u16 mt2060_if1[2]; u8 rc_toggle; u8 rc_counter; + u8 rc_func_version; u8 is_dib7000pc; u8 fw_use_new_i2c_api; u8 disable_streaming_master_mode; }; +extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion, + u32 *romversion, u32 *ramversion, u32 *fwtype); extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val); extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3); extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen); diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index dd53cee3896..200b215f4d8 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -19,6 +19,22 @@ MODULE_PARM_DESC(dvb_usb_dib0700_ir_proto, "set ir protocol (0=NEC, 1=RC5 (defau DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion, + u32 *romversion, u32 *ramversion, u32 *fwtype) +{ + u8 b[16]; + int ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), + REQUEST_GET_VERSION, + USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, + b, sizeof(b), USB_CTRL_GET_TIMEOUT); + *hwversion = (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3]; + *romversion = (b[4] << 24) | (b[5] << 16) | (b[6] << 8) | b[7]; + *ramversion = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11]; + *fwtype = (b[12] << 24) | (b[13] << 16) | (b[14] << 8) | b[15]; + return ret; +} + /* expecting rx buffer: request data[0] data[1] ... data[2] */ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen) { diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 0cfccc24b19..f28d3ae59e0 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -38,6 +38,7 @@ static struct mt2060_config bristol_mt2060_config[2] = { } }; + static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = { .band_caps = BAND_VHF | BAND_UHF, .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0), @@ -451,8 +452,13 @@ static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; /* Number of keypresses to ignore before start repeating */ #define RC_REPEAT_DELAY 2 +#define RC_REPEAT_DELAY_V1_20 5 -static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) + + +/* Used by firmware versions < 1.20 (deprecated) */ +static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event, + int *state) { u8 key[4]; int i; @@ -529,6 +535,137 @@ static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) return 0; } +/* This is the structure of the RC response packet starting in firmware 1.20 */ +struct dib0700_rc_response { + u8 report_id; + u8 data_state; + u8 system_msb; + u8 system_lsb; + u8 data; + u8 not_data; +}; + +/* This supports the new IR response format for firmware v1.20 */ +static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event, + int *state) +{ + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + struct dib0700_state *st = d->priv; + struct dib0700_rc_response poll_reply; + u8 buf[6]; + int i; + int status; + int actlen; + int found = 0; + + /* Set initial results in case we exit the function early */ + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + + /* Firmware v1.20 provides RC data via bulk endpoint 1 */ + status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf, + sizeof(buf), &actlen, 50); + if (status < 0) { + /* No data available (meaning no key press) */ + return 0; + } + + if (actlen != sizeof(buf)) { + /* We didn't get back the 6 byte message we expected */ + err("Unexpected RC response size [%d]", actlen); + return -1; + } + + poll_reply.report_id = buf[0]; + poll_reply.data_state = buf[1]; + poll_reply.system_msb = buf[2]; + poll_reply.system_lsb = buf[3]; + poll_reply.data = buf[4]; + poll_reply.not_data = buf[5]; + + /* + info("rid=%02x ds=%02x sm=%02x sl=%02x d=%02x nd=%02x\n", + poll_reply.report_id, poll_reply.data_state, + poll_reply.system_msb, poll_reply.system_lsb, + poll_reply.data, poll_reply.not_data); + */ + + if ((poll_reply.data + poll_reply.not_data) != 0xff) { + /* Key failed integrity check */ + err("key failed integrity check: %02x %02x %02x %02x", + poll_reply.system_msb, poll_reply.system_lsb, + poll_reply.data, poll_reply.not_data); + return -1; + } + + /* Find the key in the map */ + for (i = 0; i < d->props.rc_key_map_size; i++) { + if (keymap[i].custom == poll_reply.system_lsb && + keymap[i].data == poll_reply.data) { + *event = keymap[i].event; + found = 1; + break; + } + } + + if (found == 0) { + err("Unknown remote controller key: %02x %02x %02x %02x", + poll_reply.system_msb, poll_reply.system_lsb, + poll_reply.data, poll_reply.not_data); + d->last_event = 0; + return 0; + } + + if (poll_reply.data_state == 1) { + /* New key hit */ + st->rc_counter = 0; + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + d->last_event = keymap[i].event; + } else if (poll_reply.data_state == 2) { + /* Key repeated */ + st->rc_counter++; + + /* prevents unwanted double hits */ + if (st->rc_counter > RC_REPEAT_DELAY_V1_20) { + *event = d->last_event; + *state = REMOTE_KEY_PRESSED; + st->rc_counter = RC_REPEAT_DELAY_V1_20; + } + } else { + err("Unknown data state [%d]", poll_reply.data_state); + } + + return 0; +} + +static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + struct dib0700_state *st = d->priv; + + /* Because some people may have improperly named firmware files, + let's figure out whether to use the new firmware call or the legacy + call based on the firmware version embedded in the file */ + if (st->rc_func_version == 0) { + u32 hwver, romver, ramver, fwtype; + int ret = dib0700_get_version(d, &hwver, &romver, &ramver, + &fwtype); + if (ret < 0) { + err("Could not determine version info"); + return -1; + } + if (ramver < 0x10200) + st->rc_func_version = 1; + else + st->rc_func_version = 2; + } + + if (st->rc_func_version == 2) + return dib0700_rc_query_v1_20(d, event, state); + else + return dib0700_rc_query_legacy(d, event, state); +} + static struct dvb_usb_rc_key dib0700_rc_keys[] = { /* Key codes for the tiny Pinnacle remote*/ { 0x07, 0x00, KEY_MUTE }, diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/dvb/dvb-usb/usb-urb.c index 397f51a7b2a..da93b9e982c 100644 --- a/drivers/media/dvb/dvb-usb/usb-urb.c +++ b/drivers/media/dvb/dvb-usb/usb-urb.c @@ -135,7 +135,7 @@ stream->buf_list[stream->buf_num], (long long)stream->dma_addr[stream->buf_num]) static int usb_bulk_urb_init(struct usb_data_stream *stream) { - int i; + int i, j; if ((i = usb_allocate_stream_buffers(stream,stream->props.count, stream->props.u.bulk.buffersize)) < 0) @@ -143,9 +143,13 @@ static int usb_bulk_urb_init(struct usb_data_stream *stream) /* allocate the URBs */ for (i = 0; i < stream->props.count; i++) { - if ((stream->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC)) == NULL) + stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC); + if (!stream->urb_list[i]) { + deb_mem("not enough memory for urb_alloc_urb!.\n"); + for (j = 0; j < i; j++) + usb_free_urb(stream->urb_list[i]); return -ENOMEM; - + } usb_fill_bulk_urb( stream->urb_list[i], stream->udev, usb_rcvbulkpipe(stream->udev,stream->props.endpoint), stream->buf_list[i], @@ -170,9 +174,14 @@ static int usb_isoc_urb_init(struct usb_data_stream *stream) for (i = 0; i < stream->props.count; i++) { struct urb *urb; int frame_offset = 0; - if ((stream->urb_list[i] = - usb_alloc_urb(stream->props.u.isoc.framesperurb,GFP_ATOMIC)) == NULL) + + stream->urb_list[i] = usb_alloc_urb(stream->props.u.isoc.framesperurb, GFP_ATOMIC); + if (!stream->urb_list[i]) { + deb_mem("not enough memory for urb_alloc_urb!\n"); + for (j = 0; j < i; j++) + usb_free_urb(stream->urb_list[i]); return -ENOMEM; + } urb = stream->urb_list[i]; diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c index 6f9b7736044..e98d6caf2c2 100644 --- a/drivers/media/dvb/siano/sms-cards.c +++ b/drivers/media/dvb/siano/sms-cards.c @@ -95,7 +95,7 @@ static struct sms_board sms_boards[] = { [SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = { .name = "Hauppauge WinTV MiniStick", .type = SMS_NOVA_B0, - .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-01.fw", + .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw", }, }; diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index 66ab0c6e978..4a3f2b8ea37 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -808,6 +808,12 @@ static int ttusb_alloc_iso_urbs(struct ttusb *ttusb) ISO_BUF_COUNT, &ttusb->iso_dma_handle); + if (!ttusb->iso_buffer) { + dprintk("%s: pci_alloc_consistent - not enough memory\n", + __func__); + return -ENOMEM; + } + memset(ttusb->iso_buffer, 0, ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF * ISO_BUF_COUNT); @@ -1659,7 +1665,14 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i ttusb_setup_interfaces(ttusb); - ttusb_alloc_iso_urbs(ttusb); + result = ttusb_alloc_iso_urbs(ttusb); + if (result < 0) { + dprintk("%s: ttusb_alloc_iso_urbs - failed\n", __func__); + mutex_unlock(&ttusb->semi2c); + kfree(ttusb); + return result; + } + if (ttusb_init_controller(ttusb)) printk("ttusb_init_controller: error\n"); diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index ab33fec8a19..0aa96df80fc 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -1157,6 +1157,12 @@ static int ttusb_dec_alloc_iso_urbs(struct ttusb_dec *dec) ISO_BUF_COUNT), &dec->iso_dma_handle); + if (!dec->iso_buffer) { + dprintk("%s: pci_alloc_consistent - not enough memory\n", + __func__); + return -ENOMEM; + } + memset(dec->iso_buffer, 0, ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF * ISO_BUF_COUNT)); @@ -1254,6 +1260,7 @@ static int ttusb_dec_init_usb(struct ttusb_dec *dec) dec->irq_buffer = usb_buffer_alloc(dec->udev,IRQ_PACKET_SIZE, GFP_ATOMIC, &dec->irq_dma_handle); if(!dec->irq_buffer) { + usb_free_urb(dec->irq_urb); return -ENOMEM; } usb_fill_int_urb(dec->irq_urb, dec->udev,dec->irq_pipe, diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index ac3292d7646..7a8d49ef646 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -62,7 +62,7 @@ static int em28xx_isoc_audio_deinit(struct em28xx *dev) dprintk("Stopping isoc\n"); for (i = 0; i < EM28XX_AUDIO_BUFS; i++) { - usb_kill_urb(dev->adev->urb[i]); + usb_unlink_urb(dev->adev->urb[i]); usb_free_urb(dev->adev->urb[i]); dev->adev->urb[i] = NULL; } @@ -75,7 +75,6 @@ static void em28xx_audio_isocirq(struct urb *urb) struct em28xx *dev = urb->context; int i; unsigned int oldptr; - unsigned long flags; int period_elapsed = 0; int status; unsigned char *cp; @@ -96,9 +95,21 @@ static void em28xx_audio_isocirq(struct urb *urb) if (!length) continue; - spin_lock_irqsave(&dev->adev->slock, flags); - oldptr = dev->adev->hwptr_done_capture; + if (oldptr + length >= runtime->buffer_size) { + unsigned int cnt = + runtime->buffer_size - oldptr; + memcpy(runtime->dma_area + oldptr * stride, cp, + cnt * stride); + memcpy(runtime->dma_area, cp + cnt * stride, + length * stride - cnt * stride); + } else { + memcpy(runtime->dma_area + oldptr * stride, cp, + length * stride); + } + + snd_pcm_stream_lock(substream); + dev->adev->hwptr_done_capture += length; if (dev->adev->hwptr_done_capture >= runtime->buffer_size) @@ -113,19 +124,7 @@ static void em28xx_audio_isocirq(struct urb *urb) period_elapsed = 1; } - spin_unlock_irqrestore(&dev->adev->slock, flags); - - if (oldptr + length >= runtime->buffer_size) { - unsigned int cnt = - runtime->buffer_size - oldptr; - memcpy(runtime->dma_area + oldptr * stride, cp, - cnt * stride); - memcpy(runtime->dma_area, cp + cnt * stride, - length * stride - cnt * stride); - } else { - memcpy(runtime->dma_area + oldptr * stride, cp, - length * stride); - } + snd_pcm_stream_unlock(substream); } if (period_elapsed) snd_pcm_period_elapsed(substream); diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c index 5d837c16ee2..15e2b525310 100644 --- a/drivers/media/video/em28xx/em28xx-core.c +++ b/drivers/media/video/em28xx/em28xx-core.c @@ -69,19 +69,33 @@ int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg, int ret, byte; if (dev->state & DEV_DISCONNECTED) - return(-ENODEV); + return -ENODEV; + + if (len > URB_MAX_CTRL_SIZE) + return -EINVAL; em28xx_regdbg("req=%02x, reg=%02x ", req, reg); + mutex_lock(&dev->ctrl_urb_lock); ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0x0000, reg, buf, len, HZ); + 0x0000, reg, dev->urb_buf, len, HZ); + if (ret < 0) { + if (reg_debug) + printk(" failed!\n"); + mutex_unlock(&dev->ctrl_urb_lock); + return ret; + } + + if (len) + memcpy(buf, dev->urb_buf, len); + + mutex_unlock(&dev->ctrl_urb_lock); if (reg_debug) { - printk(ret < 0 ? " failed!\n" : "%02x values: ", ret); + printk("%02x values: ", ret); for (byte = 0; byte < len; byte++) printk(" %02x", (unsigned char)buf[byte]); - printk("\n"); } @@ -102,16 +116,20 @@ int em28xx_read_reg_req(struct em28xx *dev, u8 req, u16 reg) em28xx_regdbg("req=%02x, reg=%02x:", req, reg); + mutex_lock(&dev->ctrl_urb_lock); ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0x0000, reg, &val, 1, HZ); - - if (reg_debug) - printk(ret < 0 ? " failed!\n" : - "%02x\n", (unsigned char) val); + 0x0000, reg, dev->urb_buf, 1, HZ); + val = dev->urb_buf[0]; + mutex_unlock(&dev->ctrl_urb_lock); - if (ret < 0) + if (ret < 0) { + printk(" failed!\n"); return ret; + } + + if (reg_debug) + printk("%02x\n", (unsigned char) val); return val; } @@ -130,19 +148,13 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, { int ret; - /*usb_control_msg seems to expect a kmalloced buffer */ - unsigned char *bufs; - if (dev->state & DEV_DISCONNECTED) return -ENODEV; - if (len < 1) + if ((len < 1) || (len > URB_MAX_CTRL_SIZE)) return -EINVAL; - bufs = kmalloc(len, GFP_KERNEL); - em28xx_regdbg("req=%02x reg=%02x:", req, reg); - if (reg_debug) { int i; for (i = 0; i < len; ++i) @@ -150,16 +162,16 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf, printk("\n"); } - if (!bufs) - return -ENOMEM; - memcpy(bufs, buf, len); + mutex_lock(&dev->ctrl_urb_lock); + memcpy(dev->urb_buf, buf, len); ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0x0000, reg, bufs, len, HZ); + 0x0000, reg, dev->urb_buf, len, HZ); + mutex_unlock(&dev->ctrl_urb_lock); + if (dev->wait_after_write) msleep(dev->wait_after_write); - kfree(bufs); return ret; } @@ -270,6 +282,8 @@ static int em28xx_set_audio_source(struct em28xx *dev) break; case EM28XX_AMUX_LINE_IN: input = EM28XX_AUDIO_SRC_LINE; + video = disable; + line = enable; break; case EM28XX_AMUX_AC97_VIDEO: input = EM28XX_AUDIO_SRC_LINE; diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c index 3bab56b997f..2360c61ddca 100644 --- a/drivers/media/video/em28xx/em28xx-i2c.c +++ b/drivers/media/video/em28xx/em28xx-i2c.c @@ -337,9 +337,9 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len) /* Check if board has eeprom */ err = i2c_master_recv(&dev->i2c_client, &buf, 0); if (err < 0) { - em28xx_errdev("%s: i2c_master_recv failed! err [%d]\n", - __func__, err); - return err; + em28xx_errdev("board has no eeprom\n"); + memset(eedata, 0, len); + return -ENODEV; } buf = 0; @@ -609,14 +609,16 @@ int em28xx_i2c_register(struct em28xx *dev) dev->i2c_client.adapter = &dev->i2c_adap; retval = em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata)); - if (retval < 0) { + if ((retval < 0) && (retval != -ENODEV)) { em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n", __func__, retval); + return retval; } if (i2c_scan) em28xx_do_i2c_scan(dev); + return 0; } diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index a1ab2ef4557..610f535a257 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -73,6 +73,7 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); static LIST_HEAD(em28xx_devlist); +static DEFINE_MUTEX(em28xx_devlist_mutex); static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET }; @@ -1519,7 +1520,7 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) struct em28xx_fh *fh; enum v4l2_buf_type fh_type = 0; - lock_kernel(); + mutex_lock(&em28xx_devlist_mutex); list_for_each_entry(h, &em28xx_devlist, devlist) { if (h->vdev->minor == minor) { dev = h; @@ -1535,10 +1536,11 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) dev = h; } } - if (NULL == dev) { - unlock_kernel(); + mutex_unlock(&em28xx_devlist_mutex); + if (NULL == dev) return -ENODEV; - } + + mutex_lock(&dev->lock); em28xx_videodbg("open minor=%d type=%s users=%d\n", minor, v4l2_type_names[fh_type], dev->users); @@ -1547,10 +1549,9 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL); if (!fh) { em28xx_errdev("em28xx-video.c: Out of memory?!\n"); - unlock_kernel(); + mutex_unlock(&dev->lock); return -ENOMEM; } - mutex_lock(&dev->lock); fh->dev = dev; fh->radio = radio; fh->type = fh_type; @@ -1584,7 +1585,6 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp) sizeof(struct em28xx_buffer), fh); mutex_unlock(&dev->lock); - unlock_kernel(); return errCode; } @@ -1871,6 +1871,7 @@ int em28xx_register_extension(struct em28xx_ops *ops) { struct em28xx *dev = NULL; + mutex_lock(&em28xx_devlist_mutex); mutex_lock(&em28xx_extension_devlist_lock); list_add_tail(&ops->next, &em28xx_extension_devlist); list_for_each_entry(dev, &em28xx_devlist, devlist) { @@ -1879,6 +1880,7 @@ int em28xx_register_extension(struct em28xx_ops *ops) } printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name); mutex_unlock(&em28xx_extension_devlist_lock); + mutex_unlock(&em28xx_devlist_mutex); return 0; } EXPORT_SYMBOL(em28xx_register_extension); @@ -1887,6 +1889,7 @@ void em28xx_unregister_extension(struct em28xx_ops *ops) { struct em28xx *dev = NULL; + mutex_lock(&em28xx_devlist_mutex); list_for_each_entry(dev, &em28xx_devlist, devlist) { if (dev) ops->fini(dev); @@ -1896,6 +1899,7 @@ void em28xx_unregister_extension(struct em28xx_ops *ops) printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name); list_del(&ops->next); mutex_unlock(&em28xx_extension_devlist_lock); + mutex_unlock(&em28xx_devlist_mutex); } EXPORT_SYMBOL(em28xx_unregister_extension); @@ -1921,6 +1925,60 @@ static struct video_device *em28xx_vdev_init(struct em28xx *dev, } +static int register_analog_devices(struct em28xx *dev) +{ + int ret; + + /* allocate and fill video video_device struct */ + dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video"); + if (!dev->vdev) { + em28xx_errdev("cannot allocate video_device.\n"); + return -ENODEV; + } + + /* register v4l2 video video_device */ + ret = video_register_device(dev->vdev, VFL_TYPE_GRABBER, + video_nr[dev->devno]); + if (ret) { + em28xx_errdev("unable to register video device (error=%i).\n", + ret); + return ret; + } + + /* Allocate and fill vbi video_device struct */ + dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi"); + + /* register v4l2 vbi video_device */ + ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI, + vbi_nr[dev->devno]); + if (ret < 0) { + em28xx_errdev("unable to register vbi device\n"); + return ret; + } + + if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) { + dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio"); + if (!dev->radio_dev) { + em28xx_errdev("cannot allocate video_device.\n"); + return -ENODEV; + } + ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO, + radio_nr[dev->devno]); + if (ret < 0) { + em28xx_errdev("can't register radio device\n"); + return ret; + } + em28xx_info("Registered radio device as /dev/radio%d\n", + dev->radio_dev->num); + } + + em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n", + dev->vdev->num, dev->vbi_dev->num); + + return 0; +} + + /* * em28xx_init_dev() * allocates and inits the device structs, registers i2c bus and v4l device @@ -1936,6 +1994,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, dev->udev = udev; mutex_init(&dev->lock); + mutex_init(&dev->ctrl_urb_lock); spin_lock_init(&dev->slock); init_waitqueue_head(&dev->open); init_waitqueue_head(&dev->wait_frame); @@ -1953,8 +2012,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, errCode = em28xx_config(dev); if (errCode) { em28xx_errdev("error configuring device\n"); - em28xx_devused &= ~(1<<dev->devno); - kfree(dev); return -ENOMEM; } @@ -2001,50 +2058,6 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, return errCode; } - list_add_tail(&dev->devlist, &em28xx_devlist); - - /* allocate and fill video video_device struct */ - dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video"); - if (NULL == dev->vdev) { - em28xx_errdev("cannot allocate video_device.\n"); - goto fail_unreg; - } - - /* register v4l2 video video_device */ - retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, - video_nr[dev->devno]); - if (retval) { - em28xx_errdev("unable to register video device (error=%i).\n", - retval); - goto fail_unreg; - } - - /* Allocate and fill vbi video_device struct */ - dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi"); - /* register v4l2 vbi video_device */ - if (video_register_device(dev->vbi_dev, VFL_TYPE_VBI, - vbi_nr[dev->devno]) < 0) { - em28xx_errdev("unable to register vbi device\n"); - retval = -ENODEV; - goto fail_unreg; - } - - if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) { - dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio"); - if (NULL == dev->radio_dev) { - em28xx_errdev("cannot allocate video_device.\n"); - goto fail_unreg; - } - retval = video_register_device(dev->radio_dev, VFL_TYPE_RADIO, - radio_nr[dev->devno]); - if (retval < 0) { - em28xx_errdev("can't register radio device\n"); - goto fail_unreg; - } - em28xx_info("Registered radio device as /dev/radio%d\n", - dev->radio_dev->num); - } - /* init video dma queues */ INIT_LIST_HEAD(&dev->vidq.active); INIT_LIST_HEAD(&dev->vidq.queued); @@ -2071,8 +2084,14 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, video_mux(dev, 0); - em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n", - dev->vdev->num, dev->vbi_dev->num); + mutex_lock(&em28xx_devlist_mutex); + list_add_tail(&dev->devlist, &em28xx_devlist); + retval = register_analog_devices(dev); + if (retval < 0) { + em28xx_release_resources(dev); + mutex_unlock(&em28xx_devlist_mutex); + goto fail_reg_devices; + } mutex_lock(&em28xx_extension_devlist_lock); if (!list_empty(&em28xx_extension_devlist)) { @@ -2082,13 +2101,12 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, } } mutex_unlock(&em28xx_extension_devlist_lock); + mutex_unlock(&em28xx_devlist_mutex); return 0; -fail_unreg: - em28xx_release_resources(dev); +fail_reg_devices: mutex_unlock(&dev->lock); - kfree(dev); return retval; } @@ -2231,8 +2249,12 @@ static int em28xx_usb_probe(struct usb_interface *interface, /* allocate device struct */ retval = em28xx_init_dev(&dev, udev, nr); - if (retval) + if (retval) { + em28xx_devused &= ~(1<<dev->devno); + kfree(dev); + return retval; + } em28xx_info("Found %s\n", em28xx_boards[dev->model].name); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 82781178e0a..5956e9b3062 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -102,6 +102,9 @@ #define EM28XX_MIN_BUF 4 #define EM28XX_DEF_BUF 8 +/*Limits the max URB message size */ +#define URB_MAX_CTRL_SIZE 80 + /* Params for validated field */ #define EM28XX_BOARD_NOT_VALIDATED 1 #define EM28XX_BOARD_VALIDATED 0 @@ -430,6 +433,7 @@ struct em28xx { /* locks */ struct mutex lock; + struct mutex ctrl_urb_lock; /* protects urb_buf */ /* spinlock_t queue_lock; */ struct list_head inqueue, outqueue; wait_queue_head_t open, wait_frame, wait_stream; @@ -451,6 +455,8 @@ struct em28xx { unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */ struct urb *urb[EM28XX_NUM_BUFS]; /* urb for isoc transfers */ char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc transfer */ + char urb_buf[URB_MAX_CTRL_SIZE]; /* urb control msg buffer */ + /* helper funcs that call usb_control_msg */ int (*em28xx_write_regs) (struct em28xx *dev, u16 reg, char *buf, int len); diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c index a9d51ba7c57..de28354ea5b 100644 --- a/drivers/media/video/gspca/conex.c +++ b/drivers/media/video/gspca/conex.c @@ -846,10 +846,13 @@ static int sd_start(struct gspca_dev *gspca_dev) return 0; } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { int retry = 50; + if (!gspca_dev->present) + return; reg_w_val(gspca_dev, 0x0000, 0x00); reg_r(gspca_dev, 0x0002, 1); reg_w_val(gspca_dev, 0x0053, 0x00); diff --git a/drivers/media/video/gspca/finepix.c b/drivers/media/video/gspca/finepix.c index 65d3cbfe6b2..607942fd797 100644 --- a/drivers/media/video/gspca/finepix.c +++ b/drivers/media/video/gspca/finepix.c @@ -276,6 +276,12 @@ static void sd_stopN(struct gspca_dev *gspca_dev) /* Stop the state machine */ if (dev->state != FPIX_NOP) wait_for_completion(&dev->can_close); +} + +/* called on streamoff with alt 0 and disconnect */ +static void sd_stop0(struct gspca_dev *gspca_dev) +{ + struct usb_fpix *dev = (struct usb_fpix *) gspca_dev; usb_free_urb(dev->control_urb); dev->control_urb = NULL; @@ -385,6 +391,7 @@ static int sd_start(struct gspca_dev *gspca_dev) error: /* Free the ressources */ sd_stopN(gspca_dev); + sd_stop0(gspca_dev); return ret; } @@ -425,6 +432,7 @@ static const struct sd_desc sd_desc = { .init = sd_init, .start = sd_start, .stopN = sd_stopN, + .stop0 = sd_stop0, }; /* -- device connect -- */ diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index e48fbfc8ad0..748a87e82e4 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -646,15 +646,14 @@ static void gspca_stream_off(struct gspca_dev *gspca_dev) { gspca_dev->streaming = 0; atomic_set(&gspca_dev->nevent, 0); - if (gspca_dev->present) { - if (gspca_dev->sd_desc->stopN) - gspca_dev->sd_desc->stopN(gspca_dev); - destroy_urbs(gspca_dev); - gspca_set_alt0(gspca_dev); - if (gspca_dev->sd_desc->stop0) - gspca_dev->sd_desc->stop0(gspca_dev); - PDEBUG(D_STREAM, "stream off OK"); - } + if (gspca_dev->present + && gspca_dev->sd_desc->stopN) + gspca_dev->sd_desc->stopN(gspca_dev); + destroy_urbs(gspca_dev); + gspca_set_alt0(gspca_dev); + if (gspca_dev->sd_desc->stop0) + gspca_dev->sd_desc->stop0(gspca_dev); + PDEBUG(D_STREAM, "stream off OK"); } static void gspca_set_default_mode(struct gspca_dev *gspca_dev) @@ -863,7 +862,7 @@ static int dev_open(struct inode *inode, struct file *file) int ret; PDEBUG(D_STREAM, "%s open", current->comm); - gspca_dev = (struct gspca_dev *) video_devdata(file); + gspca_dev = video_drvdata(file); if (mutex_lock_interruptible(&gspca_dev->queue_lock)) return -ERESTARTSYS; if (!gspca_dev->present) { @@ -875,6 +874,13 @@ static int dev_open(struct inode *inode, struct file *file) ret = -EBUSY; goto out; } + + /* protect the subdriver against rmmod */ + if (!try_module_get(gspca_dev->module)) { + ret = -ENODEV; + goto out; + } + gspca_dev->users++; /* one more user */ @@ -884,10 +890,10 @@ static int dev_open(struct inode *inode, struct file *file) #ifdef GSPCA_DEBUG /* activate the v4l2 debug */ if (gspca_debug & D_V4L2) - gspca_dev->vdev.debug |= V4L2_DEBUG_IOCTL + gspca_dev->vdev->debug |= V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG; else - gspca_dev->vdev.debug &= ~(V4L2_DEBUG_IOCTL + gspca_dev->vdev->debug &= ~(V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG); #endif ret = 0; @@ -921,6 +927,7 @@ static int dev_close(struct inode *inode, struct file *file) gspca_dev->memory = GSPCA_MEMORY_NO; } file->private_data = NULL; + module_put(gspca_dev->module); mutex_unlock(&gspca_dev->queue_lock); PDEBUG(D_STREAM, "close done"); @@ -1748,11 +1755,6 @@ out: return ret; } -static void dev_release(struct video_device *vfd) -{ - /* nothing */ -} - static struct file_operations dev_fops = { .owner = THIS_MODULE, .open = dev_open, @@ -1800,7 +1802,7 @@ static struct video_device gspca_template = { .name = "gspca main driver", .fops = &dev_fops, .ioctl_ops = &dev_ioctl_ops, - .release = dev_release, /* mandatory */ + .release = video_device_release, .minor = -1, }; @@ -1869,17 +1871,18 @@ int gspca_dev_probe(struct usb_interface *intf, init_waitqueue_head(&gspca_dev->wq); /* init video stuff */ - memcpy(&gspca_dev->vdev, &gspca_template, sizeof gspca_template); - gspca_dev->vdev.parent = &dev->dev; - memcpy(&gspca_dev->fops, &dev_fops, sizeof gspca_dev->fops); - gspca_dev->vdev.fops = &gspca_dev->fops; - gspca_dev->fops.owner = module; /* module protection */ + gspca_dev->vdev = video_device_alloc(); + memcpy(gspca_dev->vdev, &gspca_template, sizeof gspca_template); + gspca_dev->vdev->parent = &dev->dev; + gspca_dev->module = module; gspca_dev->present = 1; - ret = video_register_device(&gspca_dev->vdev, + video_set_drvdata(gspca_dev->vdev, gspca_dev); + ret = video_register_device(gspca_dev->vdev, VFL_TYPE_GRABBER, video_nr); if (ret < 0) { err("video_register_device err %d", ret); + video_device_release(gspca_dev->vdev); goto out; } @@ -1887,7 +1890,8 @@ int gspca_dev_probe(struct usb_interface *intf, PDEBUG(D_PROBE, "probe ok"); return 0; out: - kref_put(&gspca_dev->kref, gspca_delete); + kfree(gspca_dev->usb_buf); + kfree(gspca_dev); return ret; } EXPORT_SYMBOL(gspca_dev_probe); @@ -1905,7 +1909,7 @@ void gspca_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); /* We don't want people trying to open up the device */ - video_unregister_device(&gspca_dev->vdev); + video_unregister_device(gspca_dev->vdev); gspca_dev->present = 0; gspca_dev->streaming = 0; diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h index 1d9dc90b479..d25e8d69373 100644 --- a/drivers/media/video/gspca/gspca.h +++ b/drivers/media/video/gspca/gspca.h @@ -97,7 +97,7 @@ struct sd_desc { cam_pkt_op pkt_scan; /* optional operations */ cam_v_op stopN; /* called on stream off - main alt */ - cam_v_op stop0; /* called on stream off - alt 0 */ + cam_v_op stop0; /* called on stream off & disconnect - alt 0 */ cam_v_op dq_callback; /* called when a frame has been dequeued */ cam_jpg_op get_jcomp; cam_jpg_op set_jcomp; @@ -120,8 +120,8 @@ struct gspca_frame { }; struct gspca_dev { - struct video_device vdev; /* !! must be the first item */ - struct file_operations fops; + struct video_device *vdev; + struct module *module; /* subdriver handling the device */ struct usb_device *dev; struct kref kref; struct file *capt_file; /* file doing video capture */ diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c index e5ff9a6199e..fbd45e235d9 100644 --- a/drivers/media/video/gspca/pac7311.c +++ b/drivers/media/video/gspca/pac7311.c @@ -749,10 +749,13 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */ } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (!gspca_dev->present) + return; if (sd->sensor == SENSOR_PAC7302) { reg_w(gspca_dev, 0xff, 0x01); reg_w(gspca_dev, 0x78, 0x40); diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c index b742f260c7c..e29954c1c38 100644 --- a/drivers/media/video/gspca/spca501.c +++ b/drivers/media/video/gspca/spca501.c @@ -2022,8 +2022,11 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x01, 0x00); } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { + if (!gspca_dev->present) + return; reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x05, 0x00); } diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c index b345749213c..895b9fe4018 100644 --- a/drivers/media/video/gspca/spca505.c +++ b/drivers/media/video/gspca/spca505.c @@ -742,8 +742,12 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_write(gspca_dev->dev, 0x02, 0x00, 0x00); } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { + if (!gspca_dev->present) + return; + /* This maybe reset or power control */ reg_write(gspca_dev->dev, 0x03, 0x03, 0x20); reg_write(gspca_dev->dev, 0x03, 0x01, 0x0); diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c index 020a03c466c..c3de4e44123 100644 --- a/drivers/media/video/gspca/spca561.c +++ b/drivers/media/video/gspca/spca561.c @@ -766,10 +766,13 @@ static void sd_stopN(struct gspca_dev *gspca_dev) } } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (!gspca_dev->present) + return; if (sd->chip_revision == Rev012A) { reg_w_val(gspca_dev->dev, 0x8118, 0x29); reg_w_val(gspca_dev->dev, 0x8114, 0x08); diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index be46d923254..17af353ddd1 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -1633,10 +1633,13 @@ static void sd_stopN(struct gspca_dev *gspca_dev) reg_w(dev, 0xa0, 0x09, 0xb003); } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { struct usb_device *dev = gspca_dev->dev; + if (!gspca_dev->present) + return; reg_w(dev, 0x89, 0xffff, 0xffff); } diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c index 8b3101d347c..0befacf4985 100644 --- a/drivers/media/video/gspca/zc3xx.c +++ b/drivers/media/video/gspca/zc3xx.c @@ -7336,10 +7336,13 @@ static int sd_start(struct gspca_dev *gspca_dev) return 0; } +/* called on streamoff with alt 0 and on disconnect */ static void sd_stop0(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; + if (!gspca_dev->present) + return; send_unknown(gspca_dev->dev, sd->sensor); } diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 9f1038f65d3..70a77625107 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1073,7 +1073,7 @@ static int pxa_camera_probe(struct platform_device *pdev) goto exit; } - pcdev->clk = clk_get(&pdev->dev, "CAMCLK"); + pcdev->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(pcdev->clk)) { err = PTR_ERR(pcdev->clk); goto exit_kfree; diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 5272926db73..3c3f8cf7310 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -192,7 +192,7 @@ struct s2255_dmaqueue { #define S2255_FW_FAILED 3 #define S2255_FW_DISCONNECTING 4 -#define S2255_FW_MARKER 0x22552f2f +#define S2255_FW_MARKER cpu_to_le32(0x22552f2f) /* 2255 read states */ #define S2255_READ_IDLE 0 #define S2255_READ_FRAME 1 diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c index 84bdc2ee69e..a443e136dc4 100644 --- a/drivers/message/i2o/i2o_block.c +++ b/drivers/message/i2o/i2o_block.c @@ -354,7 +354,7 @@ static inline void i2o_block_sglist_free(struct i2o_block_request *ireq) * @req: the request to prepare * * Allocate the necessary i2o_block_request struct and connect it to - * the request. This is needed that we not loose the SG list later on. + * the request. This is needed that we not lose the SG list later on. * * Returns BLKPREP_OK on success or BLKPREP_DEFER on failure. */ diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c index be2b5926d26..6e53a30bfd3 100644 --- a/drivers/message/i2o/iop.c +++ b/drivers/message/i2o/iop.c @@ -49,7 +49,6 @@ static int i2o_hrt_get(struct i2o_controller *c); /** * i2o_msg_get_wait - obtain an I2O message from the IOP * @c: I2O controller - * @msg: pointer to a I2O message pointer * @wait: how long to wait until timeout * * This function waits up to wait seconds for a message slot to be diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index e4c0db4dc7b..9e485459f63 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -474,9 +474,9 @@ static __init int asic3_gpio_probe(struct platform_device *pdev, u16 dir_reg[ASIC3_NUM_GPIO_BANKS]; int i; - memzero(alt_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); - memzero(out_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); - memzero(dir_reg, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); + memset(alt_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); + memset(out_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); + memset(dir_reg, 0, ASIC3_NUM_GPIO_BANKS * sizeof(u16)); /* Enable all GPIOs */ asic3_write_register(asic, ASIC3_GPIO_OFFSET(A, MASK), 0xffff); diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c index b4ed57e0272..6063dc2b52e 100644 --- a/drivers/mfd/mcp-core.c +++ b/drivers/mfd/mcp-core.c @@ -18,7 +18,7 @@ #include <linux/slab.h> #include <linux/string.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <asm/system.h> #include "mcp.h" diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index 28380b20bc7..62b32dabf62 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -20,7 +20,7 @@ #include <linux/slab.h> #include <linux/platform_device.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/system.h> diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c index 61aeaf79640..86fed4870f9 100644 --- a/drivers/mfd/ucb1x00-assabet.c +++ b/drivers/mfd/ucb1x00-assabet.c @@ -15,7 +15,7 @@ #include <linux/proc_fs.h> #include <linux/device.h> -#include <asm/dma.h> +#include <mach/dma.h> #include "ucb1x00.h" diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index a316f1b7593..6860c924f36 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -25,7 +25,7 @@ #include <linux/device.h> #include <linux/mutex.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/hardware.h> #include "ucb1x00.h" diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c index 44762ca86a8..61b7d3eb9a2 100644 --- a/drivers/mfd/ucb1x00-ts.c +++ b/drivers/mfd/ucb1x00-ts.c @@ -31,7 +31,7 @@ #include <linux/slab.h> #include <linux/kthread.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/collie.h> #include <asm/mach-types.h> diff --git a/drivers/misc/sgi-gru/grufault.c b/drivers/misc/sgi-gru/grufault.c index 8c389d606c3..3ee698ad859 100644 --- a/drivers/misc/sgi-gru/grufault.c +++ b/drivers/misc/sgi-gru/grufault.c @@ -254,7 +254,11 @@ static int atomic_pte_lookup(struct vm_area_struct *vma, unsigned long vaddr, return 1; *paddr = pte_pfn(pte) << PAGE_SHIFT; +#ifdef CONFIG_HUGETLB_PAGE *pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT; +#else + *pageshift = PAGE_SHIFT; +#endif return 0; err: diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c index 5c027b6b4e5..65098380639 100644 --- a/drivers/misc/sgi-gru/grufile.c +++ b/drivers/misc/sgi-gru/grufile.c @@ -481,7 +481,7 @@ struct vm_operations_struct gru_vm_ops = { .fault = gru_fault, }; -module_init(gru_init); +fs_initcall(gru_init); module_exit(gru_exit); module_param(gru_options, ulong, 0644); diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c index 7bcb81002dc..571b211608d 100644 --- a/drivers/misc/sony-laptop.c +++ b/drivers/misc/sony-laptop.c @@ -1038,8 +1038,8 @@ static int sony_nc_add(struct acpi_device *device) goto outinput; } - if (!acpi_video_backlight_support()) { - printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be " + if (acpi_video_backlight_support()) { + printk(KERN_INFO DRV_PFX "brightness ignored, must be " "controlled by ACPI video driver\n"); } else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT", &handle))) { diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 7a4a26b0edd..899766e16fa 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -5318,6 +5318,7 @@ static enum fan_control_commands fan_control_commands; static u8 fan_control_initial_status; static u8 fan_control_desired_level; +static u8 fan_control_resume_level; static int fan_watchdog_maxinterval; static struct mutex fan_mutex; @@ -5440,8 +5441,8 @@ static int fan_set_level(int level) case TPACPI_FAN_WR_ACPI_FANS: case TPACPI_FAN_WR_TPEC: - if ((level != TP_EC_FAN_AUTO) && - (level != TP_EC_FAN_FULLSPEED) && + if (!(level & TP_EC_FAN_AUTO) && + !(level & TP_EC_FAN_FULLSPEED) && ((level < 0) || (level > 7))) return -EINVAL; @@ -6005,38 +6006,67 @@ static void fan_exit(void) static void fan_suspend(pm_message_t state) { + int rc; + if (!fan_control_allowed) return; /* Store fan status in cache */ - fan_get_status_safe(NULL); + fan_control_resume_level = 0; + rc = fan_get_status_safe(&fan_control_resume_level); + if (rc < 0) + printk(TPACPI_NOTICE + "failed to read fan level for later " + "restore during resume: %d\n", rc); + + /* if it is undefined, don't attempt to restore it. + * KEEP THIS LAST */ if (tp_features.fan_ctrl_status_undef) - fan_control_desired_level = TP_EC_FAN_AUTO; + fan_control_resume_level = 0; } static void fan_resume(void) { - u8 saved_fan_level; u8 current_level = 7; bool do_set = false; + int rc; /* DSDT *always* updates status on resume */ tp_features.fan_ctrl_status_undef = 0; - saved_fan_level = fan_control_desired_level; if (!fan_control_allowed || + !fan_control_resume_level || (fan_get_status_safe(¤t_level) < 0)) return; switch (fan_control_access_mode) { case TPACPI_FAN_WR_ACPI_SFAN: - do_set = (saved_fan_level > current_level); + /* never decrease fan level */ + do_set = (fan_control_resume_level > current_level); break; case TPACPI_FAN_WR_ACPI_FANS: case TPACPI_FAN_WR_TPEC: - do_set = ((saved_fan_level & TP_EC_FAN_FULLSPEED) || - (saved_fan_level == 7 && - !(current_level & TP_EC_FAN_FULLSPEED))); + /* never decrease fan level, scale is: + * TP_EC_FAN_FULLSPEED > 7 >= TP_EC_FAN_AUTO + * + * We expect the firmware to set either 7 or AUTO, but we + * handle FULLSPEED out of paranoia. + * + * So, we can safely only restore FULLSPEED or 7, anything + * else could slow the fan. Restoring AUTO is useless, at + * best that's exactly what the DSDT already set (it is the + * slower it uses). + * + * Always keep in mind that the DSDT *will* have set the + * fans to what the vendor supposes is the best level. We + * muck with it only to speed the fan up. + */ + if (fan_control_resume_level != 7 && + !(fan_control_resume_level & TP_EC_FAN_FULLSPEED)) + return; + else + do_set = !(current_level & TP_EC_FAN_FULLSPEED) && + (current_level != fan_control_resume_level); break; default: return; @@ -6044,8 +6074,11 @@ static void fan_resume(void) if (do_set) { printk(TPACPI_NOTICE "restoring fan level to 0x%02x\n", - saved_fan_level); - fan_set_level_safe(saved_fan_level); + fan_control_resume_level); + rc = fan_set_level_safe(fan_control_resume_level); + if (rc < 0) + printk(TPACPI_NOTICE + "failed to restore fan level: %d\n", rc); } } diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c index 2f0fcdb869b..eb29b1d933a 100644 --- a/drivers/mmc/host/imxmmc.c +++ b/drivers/mmc/host/imxmmc.c @@ -10,20 +10,6 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * 2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz> - * Changed to conform redesigned i.MX scatter gather DMA interface - * - * 2005-11-04 Pavel Pisa <pisa@cmp.felk.cvut.cz> - * Updated for 2.6.14 kernel - * - * 2005-12-13 Jay Monkman <jtm@smoothsmoothie.com> - * Found and corrected problems in the write path - * - * 2005-12-30 Pavel Pisa <pisa@cmp.felk.cvut.cz> - * The event handling rewritten right way in softirq. - * Added many ugly hacks and delays to overcome SDHC - * deficiencies - * */ #include <linux/module.h> @@ -37,9 +23,9 @@ #include <linux/mmc/card.h> #include <linux/delay.h> #include <linux/clk.h> +#include <linux/io.h> #include <asm/dma.h> -#include <asm/io.h> #include <asm/irq.h> #include <asm/sizes.h> #include <mach/mmc.h> @@ -50,17 +36,16 @@ #define DRIVER_NAME "imx-mmc" #define IMXMCI_INT_MASK_DEFAULT (INT_MASK_BUF_READY | INT_MASK_DATA_TRAN | \ - INT_MASK_WRITE_OP_DONE | INT_MASK_END_CMD_RES | \ - INT_MASK_AUTO_CARD_DETECT | INT_MASK_DAT0_EN | INT_MASK_SDIO) + INT_MASK_WRITE_OP_DONE | INT_MASK_END_CMD_RES | \ + INT_MASK_AUTO_CARD_DETECT | INT_MASK_DAT0_EN | INT_MASK_SDIO) struct imxmci_host { struct mmc_host *mmc; spinlock_t lock; struct resource *res; + void __iomem *base; int irq; imx_dmach_t dma; - unsigned int clkrt; - unsigned int cmdat; volatile unsigned int imask; unsigned int power_mode; unsigned int present; @@ -74,7 +59,7 @@ struct imxmci_host { struct tasklet_struct tasklet; unsigned int status_reg; unsigned long pending_events; - /* Next to fields are there for CPU driven transfers to overcome SDHC deficiencies */ + /* Next two fields are there for CPU driven transfers to overcome SDHC deficiencies */ u16 *data_ptr; unsigned int data_cnt; atomic_t stuck_timeout; @@ -114,14 +99,22 @@ struct imxmci_host { static void imxmci_stop_clock(struct imxmci_host *host) { int i = 0; - MMC_STR_STP_CLK &= ~STR_STP_CLK_START_CLK; - while(i < 0x1000) { - if(!(i & 0x7f)) - MMC_STR_STP_CLK |= STR_STP_CLK_STOP_CLK; + u16 reg; + + reg = readw(host->base + MMC_REG_STR_STP_CLK); + writew(reg & ~STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK); + while (i < 0x1000) { + if (!(i & 0x7f)) { + reg = readw(host->base + MMC_REG_STR_STP_CLK); + writew(reg | STR_STP_CLK_STOP_CLK, + host->base + MMC_REG_STR_STP_CLK); + } - if(!(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)) { + reg = readw(host->base + MMC_REG_STATUS); + if (!(reg & STATUS_CARD_BUS_CLK_RUN)) { /* Check twice before cut */ - if(!(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)) + reg = readw(host->base + MMC_REG_STATUS); + if (!(reg & STATUS_CARD_BUS_CLK_RUN)) return; } @@ -135,8 +128,10 @@ static int imxmci_start_clock(struct imxmci_host *host) unsigned int trials = 0; unsigned int delay_limit = 128; unsigned long flags; + u16 reg; - MMC_STR_STP_CLK &= ~STR_STP_CLK_STOP_CLK; + reg = readw(host->base + MMC_REG_STR_STP_CLK); + writew(reg & ~STR_STP_CLK_STOP_CLK, host->base + MMC_REG_STR_STP_CLK); clear_bit(IMXMCI_PEND_STARTED_b, &host->pending_events); @@ -145,18 +140,21 @@ static int imxmci_start_clock(struct imxmci_host *host) * then 6 delay loops, but during card detection (low clockrate) * it takes up to 5000 delay loops and sometimes fails for the first time */ - MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK; + reg = readw(host->base + MMC_REG_STR_STP_CLK); + writew(reg | STR_STP_CLK_START_CLK, host->base + MMC_REG_STR_STP_CLK); do { unsigned int delay = delay_limit; - while(delay--){ - if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN) + while (delay--) { + reg = readw(host->base + MMC_REG_STATUS); + if (reg & STATUS_CARD_BUS_CLK_RUN) /* Check twice before cut */ - if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN) + reg = readw(host->base + MMC_REG_STATUS); + if (reg & STATUS_CARD_BUS_CLK_RUN) return 0; - if(test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events)) + if (test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events)) return 0; } @@ -167,58 +165,59 @@ static int imxmci_start_clock(struct imxmci_host *host) * IRQ or schedule delays this function execution and the clocks has * been already stopped by other means (response processing, SDHC HW) */ - if(!test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events)) - MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK; + if (!test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events)) { + reg = readw(host->base + MMC_REG_STR_STP_CLK); + writew(reg | STR_STP_CLK_START_CLK, + host->base + MMC_REG_STR_STP_CLK); + } local_irq_restore(flags); - } while(++trials<256); + } while (++trials < 256); dev_err(mmc_dev(host->mmc), "imxmci_start_clock blocked, no luck\n"); return -1; } -static void imxmci_softreset(void) +static void imxmci_softreset(struct imxmci_host *host) { + int i; + /* reset sequence */ - MMC_STR_STP_CLK = 0x8; - MMC_STR_STP_CLK = 0xD; - MMC_STR_STP_CLK = 0x5; - MMC_STR_STP_CLK = 0x5; - MMC_STR_STP_CLK = 0x5; - MMC_STR_STP_CLK = 0x5; - MMC_STR_STP_CLK = 0x5; - MMC_STR_STP_CLK = 0x5; - MMC_STR_STP_CLK = 0x5; - MMC_STR_STP_CLK = 0x5; - - MMC_RES_TO = 0xff; - MMC_BLK_LEN = 512; - MMC_NOB = 1; + writew(0x08, host->base + MMC_REG_STR_STP_CLK); + writew(0x0D, host->base + MMC_REG_STR_STP_CLK); + + for (i = 0; i < 8; i++) + writew(0x05, host->base + MMC_REG_STR_STP_CLK); + + writew(0xff, host->base + MMC_REG_RES_TO); + writew(512, host->base + MMC_REG_BLK_LEN); + writew(1, host->base + MMC_REG_NOB); } static int imxmci_busy_wait_for_status(struct imxmci_host *host, - unsigned int *pstat, unsigned int stat_mask, - int timeout, const char *where) + unsigned int *pstat, unsigned int stat_mask, + int timeout, const char *where) { - int loops=0; - while(!(*pstat & stat_mask)) { - loops+=2; - if(loops >= timeout) { + int loops = 0; + + while (!(*pstat & stat_mask)) { + loops += 2; + if (loops >= timeout) { dev_dbg(mmc_dev(host->mmc), "busy wait timeout in %s, STATUS = 0x%x (0x%x)\n", where, *pstat, stat_mask); return -1; } udelay(2); - *pstat |= MMC_STATUS; + *pstat |= readw(host->base + MMC_REG_STATUS); } - if(!loops) + if (!loops) return 0; /* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */ - if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000)) + if (!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock >= 8000000)) dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n", - loops, where, *pstat, stat_mask); + loops, where, *pstat, stat_mask); return loops; } @@ -235,8 +234,8 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) host->data = data; data->bytes_xfered = 0; - MMC_NOB = nob; - MMC_BLK_LEN = blksz; + writew(nob, host->base + MMC_REG_NOB); + writew(blksz, host->base + MMC_REG_BLK_LEN); /* * DMA cannot be used for small block sizes, we have to use CPU driven transfers otherwise. @@ -252,14 +251,14 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) host->dma_dir = DMA_FROM_DEVICE; /* Hack to enable read SCR */ - MMC_NOB = 1; - MMC_BLK_LEN = 512; + writew(1, host->base + MMC_REG_NOB); + writew(512, host->base + MMC_REG_BLK_LEN); } else { host->dma_dir = DMA_TO_DEVICE; } /* Convert back to virtual address */ - host->data_ptr = (u16*)sg_virt(data->sg); + host->data_ptr = (u16 *)sg_virt(data->sg); host->data_cnt = 0; clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events); @@ -271,10 +270,11 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) if (data->flags & MMC_DATA_READ) { host->dma_dir = DMA_FROM_DEVICE; host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, - data->sg_len, host->dma_dir); + data->sg_len, host->dma_dir); imx_dma_setup_sg(host->dma, data->sg, data->sg_len, datasz, - host->res->start + MMC_BUFFER_ACCESS_OFS, DMA_MODE_READ); + host->res->start + MMC_REG_BUFFER_ACCESS, + DMA_MODE_READ); /*imx_dma_setup_mem2dev_ccr(host->dma, DMA_MODE_READ, IMX_DMA_WIDTH_16, CCR_REN);*/ CCR(host->dma) = CCR_DMOD_LINEAR | CCR_DSIZ_32 | CCR_SMOD_FIFO | CCR_SSIZ_16 | CCR_REN; @@ -282,10 +282,11 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) host->dma_dir = DMA_TO_DEVICE; host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg, - data->sg_len, host->dma_dir); + data->sg_len, host->dma_dir); imx_dma_setup_sg(host->dma, data->sg, data->sg_len, datasz, - host->res->start + MMC_BUFFER_ACCESS_OFS, DMA_MODE_WRITE); + host->res->start + MMC_REG_BUFFER_ACCESS, + DMA_MODE_WRITE); /*imx_dma_setup_mem2dev_ccr(host->dma, DMA_MODE_WRITE, IMX_DMA_WIDTH_16, CCR_REN);*/ CCR(host->dma) = CCR_SMOD_LINEAR | CCR_SSIZ_32 | CCR_DMOD_FIFO | CCR_DSIZ_16 | CCR_REN; @@ -293,12 +294,12 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) #if 1 /* This code is there only for consistency checking and can be disabled in future */ host->dma_size = 0; - for(i=0; i<host->dma_nents; i++) - host->dma_size+=data->sg[i].length; + for (i = 0; i < host->dma_nents; i++) + host->dma_size += data->sg[i].length; if (datasz > host->dma_size) { dev_err(mmc_dev(host->mmc), "imxmci_setup_data datasz 0x%x > 0x%x dm_size\n", - datasz, host->dma_size); + datasz, host->dma_size); } #endif @@ -306,7 +307,7 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) wmb(); - if(host->actual_bus_width == MMC_BUS_WIDTH_4) + if (host->actual_bus_width == MMC_BUS_WIDTH_4) BLR(host->dma) = 0; /* burst 64 byte read / 64 bytes write */ else BLR(host->dma) = 16; /* burst 16 byte read / 16 bytes write */ @@ -317,9 +318,8 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) clear_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events); /* start DMA engine for read, write is delayed after initial response */ - if (host->dma_dir == DMA_FROM_DEVICE) { + if (host->dma_dir == DMA_FROM_DEVICE) imx_dma_enable(host->dma); - } } static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd, unsigned int cmdat) @@ -351,16 +351,16 @@ static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd, break; } - if ( test_and_clear_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events) ) + if (test_and_clear_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events)) cmdat |= CMD_DAT_CONT_INIT; /* This command needs init */ - if ( host->actual_bus_width == MMC_BUS_WIDTH_4 ) + if (host->actual_bus_width == MMC_BUS_WIDTH_4) cmdat |= CMD_DAT_CONT_BUS_WIDTH_4; - MMC_CMD = cmd->opcode; - MMC_ARGH = cmd->arg >> 16; - MMC_ARGL = cmd->arg & 0xffff; - MMC_CMD_DAT_CONT = cmdat; + writew(cmd->opcode, host->base + MMC_REG_CMD); + writew(cmd->arg >> 16, host->base + MMC_REG_ARGH); + writew(cmd->arg & 0xffff, host->base + MMC_REG_ARGL); + writew(cmdat, host->base + MMC_REG_CMD_DAT_CONT); atomic_set(&host->stuck_timeout, 0); set_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events); @@ -368,18 +368,18 @@ static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd, imask = IMXMCI_INT_MASK_DEFAULT; imask &= ~INT_MASK_END_CMD_RES; - if ( cmdat & CMD_DAT_CONT_DATA_ENABLE ) { - /*imask &= ~INT_MASK_BUF_READY;*/ + if (cmdat & CMD_DAT_CONT_DATA_ENABLE) { + /* imask &= ~INT_MASK_BUF_READY; */ imask &= ~INT_MASK_DATA_TRAN; - if ( cmdat & CMD_DAT_CONT_WRITE ) + if (cmdat & CMD_DAT_CONT_WRITE) imask &= ~INT_MASK_WRITE_OP_DONE; - if(test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) + if (test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) imask &= ~INT_MASK_BUF_READY; } spin_lock_irqsave(&host->lock, flags); host->imask = imask; - MMC_INT_MASK = host->imask; + writew(host->imask, host->base + MMC_REG_INT_MASK); spin_unlock_irqrestore(&host->lock, flags); dev_dbg(mmc_dev(host->mmc), "CMD%02d (0x%02x) mask set to 0x%04x\n", @@ -395,14 +395,14 @@ static void imxmci_finish_request(struct imxmci_host *host, struct mmc_request * spin_lock_irqsave(&host->lock, flags); host->pending_events &= ~(IMXMCI_PEND_WAIT_RESP_m | IMXMCI_PEND_DMA_END_m | - IMXMCI_PEND_DMA_DATA_m | IMXMCI_PEND_CPU_DATA_m); + IMXMCI_PEND_DMA_DATA_m | IMXMCI_PEND_CPU_DATA_m); host->imask = IMXMCI_INT_MASK_DEFAULT; - MMC_INT_MASK = host->imask; + writew(host->imask, host->base + MMC_REG_INT_MASK); spin_unlock_irqrestore(&host->lock, flags); - if(req && req->cmd) + if (req && req->cmd) host->prev_cmd_code = req->cmd->opcode; host->req = NULL; @@ -416,17 +416,17 @@ static int imxmci_finish_data(struct imxmci_host *host, unsigned int stat) struct mmc_data *data = host->data; int data_error; - if(test_and_clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)){ + if (test_and_clear_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) { imx_dma_disable(host->dma); dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_nents, host->dma_dir); } - if ( stat & STATUS_ERR_MASK ) { - dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n",stat); - if(stat & (STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR)) + if (stat & STATUS_ERR_MASK) { + dev_dbg(mmc_dev(host->mmc), "request failed. status: 0x%08x\n", stat); + if (stat & (STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR)) data->error = -EILSEQ; - else if(stat & STATUS_TIME_OUT_READ) + else if (stat & STATUS_TIME_OUT_READ) data->error = -ETIMEDOUT; else data->error = -EIO; @@ -445,7 +445,7 @@ static int imxmci_cmd_done(struct imxmci_host *host, unsigned int stat) { struct mmc_command *cmd = host->cmd; int i; - u32 a,b,c; + u32 a, b, c; struct mmc_data *data = host->data; if (!cmd) @@ -461,18 +461,18 @@ static int imxmci_cmd_done(struct imxmci_host *host, unsigned int stat) cmd->error = -EILSEQ; } - if(cmd->flags & MMC_RSP_PRESENT) { - if(cmd->flags & MMC_RSP_136) { + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { for (i = 0; i < 4; i++) { - u32 a = MMC_RES_FIFO & 0xffff; - u32 b = MMC_RES_FIFO & 0xffff; - cmd->resp[i] = a<<16 | b; + a = readw(host->base + MMC_REG_RES_FIFO); + b = readw(host->base + MMC_REG_RES_FIFO); + cmd->resp[i] = a << 16 | b; } } else { - a = MMC_RES_FIFO & 0xffff; - b = MMC_RES_FIFO & 0xffff; - c = MMC_RES_FIFO & 0xffff; - cmd->resp[0] = a<<24 | b<<8 | c>>8; + a = readw(host->base + MMC_REG_RES_FIFO); + b = readw(host->base + MMC_REG_RES_FIFO); + c = readw(host->base + MMC_REG_RES_FIFO); + cmd->resp[0] = a << 24 | b << 8 | c >> 8; } } @@ -484,36 +484,34 @@ static int imxmci_cmd_done(struct imxmci_host *host, unsigned int stat) /* Wait for FIFO to be empty before starting DMA write */ - stat = MMC_STATUS; - if(imxmci_busy_wait_for_status(host, &stat, - STATUS_APPL_BUFF_FE, - 40, "imxmci_cmd_done DMA WR") < 0) { + stat = readw(host->base + MMC_REG_STATUS); + if (imxmci_busy_wait_for_status(host, &stat, + STATUS_APPL_BUFF_FE, + 40, "imxmci_cmd_done DMA WR") < 0) { cmd->error = -EIO; imxmci_finish_data(host, stat); - if(host->req) + if (host->req) imxmci_finish_request(host, host->req); dev_warn(mmc_dev(host->mmc), "STATUS = 0x%04x\n", - stat); + stat); return 0; } - if(test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) { + if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) imx_dma_enable(host->dma); - } } } else { struct mmc_request *req; imxmci_stop_clock(host); req = host->req; - if(data) + if (data) imxmci_finish_data(host, stat); - if( req ) { + if (req) imxmci_finish_request(host, req); - } else { + else dev_warn(mmc_dev(host->mmc), "imxmci_cmd_done: no request to finish\n"); - } } return 1; @@ -535,11 +533,10 @@ static int imxmci_data_done(struct imxmci_host *host, unsigned int stat) } else { struct mmc_request *req; req = host->req; - if( req ) { + if (req) imxmci_finish_request(host, req); - } else { + else dev_warn(mmc_dev(host->mmc), "imxmci_data_done: no request to finish\n"); - } } return 1; @@ -552,7 +549,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) int trans_done = 0; unsigned int stat = *pstat; - if(host->actual_bus_width != MMC_BUS_WIDTH_4) + if (host->actual_bus_width != MMC_BUS_WIDTH_4) burst_len = 16; else burst_len = 64; @@ -563,44 +560,44 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) udelay(20); /* required for clocks < 8MHz*/ - if(host->dma_dir == DMA_FROM_DEVICE) { + if (host->dma_dir == DMA_FROM_DEVICE) { imxmci_busy_wait_for_status(host, &stat, - STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE | - STATUS_TIME_OUT_READ, - 50, "imxmci_cpu_driven_data read"); + STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE | + STATUS_TIME_OUT_READ, + 50, "imxmci_cpu_driven_data read"); - while((stat & (STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE)) && - !(stat & STATUS_TIME_OUT_READ) && - (host->data_cnt < 512)) { + while ((stat & (STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE)) && + !(stat & STATUS_TIME_OUT_READ) && + (host->data_cnt < 512)) { udelay(20); /* required for clocks < 8MHz*/ - for(i = burst_len; i>=2 ; i-=2) { + for (i = burst_len; i >= 2 ; i -= 2) { u16 data; - data = MMC_BUFFER_ACCESS; + data = readw(host->base + MMC_REG_BUFFER_ACCESS); udelay(10); /* required for clocks < 8MHz*/ - if(host->data_cnt+2 <= host->dma_size) { + if (host->data_cnt+2 <= host->dma_size) { *(host->data_ptr++) = data; } else { - if(host->data_cnt < host->dma_size) - *(u8*)(host->data_ptr) = data; + if (host->data_cnt < host->dma_size) + *(u8 *)(host->data_ptr) = data; } host->data_cnt += 2; } - stat = MMC_STATUS; + stat = readw(host->base + MMC_REG_STATUS); dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read %d burst %d STATUS = 0x%x\n", host->data_cnt, burst_len, stat); } - if((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512)) + if ((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512)) trans_done = 1; - if(host->dma_size & 0x1ff) + if (host->dma_size & 0x1ff) stat &= ~STATUS_CRC_READ_ERR; - if(stat & STATUS_TIME_OUT_READ) { + if (stat & STATUS_TIME_OUT_READ) { dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read timeout STATUS = 0x%x\n", stat); trans_done = -1; @@ -608,12 +605,12 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) } else { imxmci_busy_wait_for_status(host, &stat, - STATUS_APPL_BUFF_FE, - 20, "imxmci_cpu_driven_data write"); + STATUS_APPL_BUFF_FE, + 20, "imxmci_cpu_driven_data write"); - while((stat & STATUS_APPL_BUFF_FE) && - (host->data_cnt < host->dma_size)) { - if(burst_len >= host->dma_size - host->data_cnt) { + while ((stat & STATUS_APPL_BUFF_FE) && + (host->data_cnt < host->dma_size)) { + if (burst_len >= host->dma_size - host->data_cnt) { burst_len = host->dma_size - host->data_cnt; host->data_cnt = host->dma_size; trans_done = 1; @@ -621,10 +618,10 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) host->data_cnt += burst_len; } - for(i = burst_len; i>0 ; i-=2) - MMC_BUFFER_ACCESS = *(host->data_ptr++); + for (i = burst_len; i > 0 ; i -= 2) + writew(*(host->data_ptr++), host->base + MMC_REG_BUFFER_ACCESS); - stat = MMC_STATUS; + stat = readw(host->base + MMC_REG_STATUS); dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data write burst %d STATUS = 0x%x\n", burst_len, stat); @@ -639,7 +636,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) static void imxmci_dma_irq(int dma, void *devid) { struct imxmci_host *host = devid; - uint32_t stat = MMC_STATUS; + u32 stat = readw(host->base + MMC_REG_STATUS); atomic_set(&host->stuck_timeout, 0); host->status_reg = stat; @@ -650,10 +647,11 @@ static void imxmci_dma_irq(int dma, void *devid) static irqreturn_t imxmci_irq(int irq, void *devid) { struct imxmci_host *host = devid; - uint32_t stat = MMC_STATUS; + u32 stat = readw(host->base + MMC_REG_STATUS); int handled = 1; - MMC_INT_MASK = host->imask | INT_MASK_SDIO | INT_MASK_AUTO_CARD_DETECT; + writew(host->imask | INT_MASK_SDIO | INT_MASK_AUTO_CARD_DETECT, + host->base + MMC_REG_INT_MASK); atomic_set(&host->stuck_timeout, 0); host->status_reg = stat; @@ -671,10 +669,10 @@ static void imxmci_tasklet_fnc(unsigned long data) unsigned int data_dir_mask = 0; /* STATUS_WR_CRC_ERROR_CODE_MASK */ int timeout = 0; - if(atomic_read(&host->stuck_timeout) > 4) { + if (atomic_read(&host->stuck_timeout) > 4) { char *what; timeout = 1; - stat = MMC_STATUS; + stat = readw(host->base + MMC_REG_STATUS); host->status_reg = stat; if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) @@ -683,29 +681,37 @@ static void imxmci_tasklet_fnc(unsigned long data) what = "RESP"; else if (test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) - if(test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events)) + if (test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events)) what = "DATA"; else what = "DMA"; else what = "???"; - dev_err(mmc_dev(host->mmc), "%s TIMEOUT, hardware stucked STATUS = 0x%04x IMASK = 0x%04x\n", - what, stat, MMC_INT_MASK); - dev_err(mmc_dev(host->mmc), "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n", - MMC_CMD_DAT_CONT, MMC_BLK_LEN, MMC_NOB, CCR(host->dma)); + dev_err(mmc_dev(host->mmc), + "%s TIMEOUT, hardware stucked STATUS = 0x%04x IMASK = 0x%04x\n", + what, stat, + readw(host->base + MMC_REG_INT_MASK)); + dev_err(mmc_dev(host->mmc), + "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n", + readw(host->base + MMC_REG_CMD_DAT_CONT), + readw(host->base + MMC_REG_BLK_LEN), + readw(host->base + MMC_REG_NOB), + CCR(host->dma)); dev_err(mmc_dev(host->mmc), "CMD%d, prevCMD%d, bus %d-bit, dma_size = 0x%x\n", - host->cmd?host->cmd->opcode:0, host->prev_cmd_code, 1<<host->actual_bus_width, host->dma_size); + host->cmd ? host->cmd->opcode : 0, + host->prev_cmd_code, + 1 << host->actual_bus_width, host->dma_size); } - if(!host->present || timeout) + if (!host->present || timeout) host->status_reg = STATUS_TIME_OUT_RESP | STATUS_TIME_OUT_READ | - STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR; + STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR; - if(test_bit(IMXMCI_PEND_IRQ_b, &host->pending_events) || timeout) { + if (test_bit(IMXMCI_PEND_IRQ_b, &host->pending_events) || timeout) { clear_bit(IMXMCI_PEND_IRQ_b, &host->pending_events); - stat = MMC_STATUS; + stat = readw(host->base + MMC_REG_STATUS); /* * This is not required in theory, but there is chance to miss some flag * which clears automatically by mask write, FreeScale original code keeps @@ -713,63 +719,62 @@ static void imxmci_tasklet_fnc(unsigned long data) */ stat |= host->status_reg; - if(test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) + if (test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) stat &= ~STATUS_CRC_READ_ERR; - if(test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) { + if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) { imxmci_busy_wait_for_status(host, &stat, - STATUS_END_CMD_RESP | STATUS_ERR_MASK, - 20, "imxmci_tasklet_fnc resp (ERRATUM #4)"); + STATUS_END_CMD_RESP | STATUS_ERR_MASK, + 20, "imxmci_tasklet_fnc resp (ERRATUM #4)"); } - if(stat & (STATUS_END_CMD_RESP | STATUS_ERR_MASK)) { - if(test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) + if (stat & (STATUS_END_CMD_RESP | STATUS_ERR_MASK)) { + if (test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) imxmci_cmd_done(host, stat); - if(host->data && (stat & STATUS_ERR_MASK)) + if (host->data && (stat & STATUS_ERR_MASK)) imxmci_data_done(host, stat); } - if(test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) { - stat |= MMC_STATUS; - if(imxmci_cpu_driven_data(host, &stat)){ - if(test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) + if (test_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events)) { + stat |= readw(host->base + MMC_REG_STATUS); + if (imxmci_cpu_driven_data(host, &stat)) { + if (test_and_clear_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) imxmci_cmd_done(host, stat); atomic_clear_mask(IMXMCI_PEND_IRQ_m|IMXMCI_PEND_CPU_DATA_m, - &host->pending_events); + &host->pending_events); imxmci_data_done(host, stat); } } } - if(test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events) && - !test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) { + if (test_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events) && + !test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events)) { - stat = MMC_STATUS; + stat = readw(host->base + MMC_REG_STATUS); /* Same as above */ stat |= host->status_reg; - if(host->dma_dir == DMA_TO_DEVICE) { + if (host->dma_dir == DMA_TO_DEVICE) data_dir_mask = STATUS_WRITE_OP_DONE; - } else { + else data_dir_mask = STATUS_DATA_TRANS_DONE; - } - if(stat & data_dir_mask) { + if (stat & data_dir_mask) { clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events); imxmci_data_done(host, stat); } } - if(test_and_clear_bit(IMXMCI_PEND_CARD_XCHG_b, &host->pending_events)) { + if (test_and_clear_bit(IMXMCI_PEND_CARD_XCHG_b, &host->pending_events)) { - if(host->cmd) + if (host->cmd) imxmci_cmd_done(host, STATUS_TIME_OUT_RESP); - if(host->data) + if (host->data) imxmci_data_done(host, STATUS_TIME_OUT_READ | STATUS_CRC_READ_ERR | STATUS_CRC_WRITE_ERR); - if(host->req) + if (host->req) imxmci_finish_request(host, host->req); mmc_detect_change(host->mmc, msecs_to_jiffies(100)); @@ -796,9 +801,8 @@ static void imxmci_request(struct mmc_host *mmc, struct mmc_request *req) if (req->data->flags & MMC_DATA_WRITE) cmdat |= CMD_DAT_CONT_WRITE; - if (req->data->flags & MMC_DATA_STREAM) { + if (req->data->flags & MMC_DATA_STREAM) cmdat |= CMD_DAT_CONT_STREAM_BLOCK; - } } imxmci_start_cmd(host, req->cmd, cmdat); @@ -811,36 +815,37 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) struct imxmci_host *host = mmc_priv(mmc); int prescaler; - if( ios->bus_width==MMC_BUS_WIDTH_4 ) { + if (ios->bus_width == MMC_BUS_WIDTH_4) { host->actual_bus_width = MMC_BUS_WIDTH_4; imx_gpio_mode(PB11_PF_SD_DAT3); - }else{ + } else { host->actual_bus_width = MMC_BUS_WIDTH_1; imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11); } - if ( host->power_mode != ios->power_mode ) { + if (host->power_mode != ios->power_mode) { switch (ios->power_mode) { case MMC_POWER_OFF: - break; + break; case MMC_POWER_UP: set_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events); - break; + break; case MMC_POWER_ON: - break; + break; } host->power_mode = ios->power_mode; } - if ( ios->clock ) { + if (ios->clock) { unsigned int clk; + u16 reg; /* The prescaler is 5 for PERCLK2 equal to 96MHz * then 96MHz / 5 = 19.2 MHz */ clk = clk_get_rate(host->clk); - prescaler=(clk+(CLK_RATE*7)/8)/CLK_RATE; - switch(prescaler) { + prescaler = (clk + (CLK_RATE * 7) / 8) / CLK_RATE; + switch (prescaler) { case 0: case 1: prescaler = 0; break; @@ -858,24 +863,29 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) dev_dbg(mmc_dev(host->mmc), "PERCLK2 %d MHz -> prescaler %d\n", clk, prescaler); - for(clk=0; clk<8; clk++) { + for (clk = 0; clk < 8; clk++) { int x; - x = CLK_RATE / (1<<clk); - if( x <= ios->clock) + x = CLK_RATE / (1 << clk); + if (x <= ios->clock) break; } - MMC_STR_STP_CLK |= STR_STP_CLK_ENABLE; /* enable controller */ + /* enable controller */ + reg = readw(host->base + MMC_REG_STR_STP_CLK); + writew(reg | STR_STP_CLK_ENABLE, + host->base + MMC_REG_STR_STP_CLK); imxmci_stop_clock(host); - MMC_CLK_RATE = (prescaler<<3) | clk; + writew((prescaler << 3) | clk, host->base + MMC_REG_CLK_RATE); /* * Under my understanding, clock should not be started there, because it would * initiate SDHC sequencer and send last or random command into card */ - /*imxmci_start_clock(host);*/ + /* imxmci_start_clock(host); */ - dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE); + dev_dbg(mmc_dev(host->mmc), + "MMC_CLK_RATE: 0x%08x\n", + readw(host->base + MMC_REG_CLK_RATE)); } else { imxmci_stop_clock(host); } @@ -915,10 +925,10 @@ static void imxmci_check_status(unsigned long data) tasklet_schedule(&host->tasklet); } - if(test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events) || - test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) { + if (test_bit(IMXMCI_PEND_WAIT_RESP_b, &host->pending_events) || + test_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events)) { atomic_inc(&host->stuck_timeout); - if(atomic_read(&host->stuck_timeout) > 4) + if (atomic_read(&host->stuck_timeout) > 4) tasklet_schedule(&host->tasklet); } else { atomic_set(&host->stuck_timeout, 0); @@ -934,6 +944,7 @@ static int imxmci_probe(struct platform_device *pdev) struct imxmci_host *host = NULL; struct resource *r; int ret = 0, irq; + u16 rev_no; printk(KERN_INFO "i.MX mmc driver\n"); @@ -942,7 +953,8 @@ static int imxmci_probe(struct platform_device *pdev) if (!r || irq < 0) return -ENXIO; - if (!request_mem_region(r->start, 0x100, pdev->name)) + r = request_mem_region(r->start, resource_size(r), pdev->name); + if (!r) return -EBUSY; mmc = mmc_alloc_host(sizeof(struct imxmci_host), &pdev->dev); @@ -966,6 +978,12 @@ static int imxmci_probe(struct platform_device *pdev) mmc->max_blk_count = 65535; host = mmc_priv(mmc); + host->base = ioremap(r->start, resource_size(r)); + if (!host->base) { + ret = -ENOMEM; + goto out; + } + host->mmc = mmc; host->dma_allocated = 0; host->pdata = pdev->dev.platform_data; @@ -993,18 +1011,20 @@ static int imxmci_probe(struct platform_device *pdev) imx_gpio_mode(PB12_PF_SD_CLK); imx_gpio_mode(PB13_PF_SD_CMD); - imxmci_softreset(); + imxmci_softreset(host); - if ( MMC_REV_NO != 0x390 ) { + rev_no = readw(host->base + MMC_REG_REV_NO); + if (rev_no != 0x390) { dev_err(mmc_dev(host->mmc), "wrong rev.no. 0x%08x. aborting.\n", - MMC_REV_NO); + readw(host->base + MMC_REG_REV_NO)); goto out; } - MMC_READ_TO = 0x2db4; /* recommended in data sheet */ + /* recommended in data sheet */ + writew(0x2db4, host->base + MMC_REG_READ_TO); host->imask = IMXMCI_INT_MASK_DEFAULT; - MMC_INT_MASK = host->imask; + writew(host->imask, host->base + MMC_REG_INT_MASK); host->dma = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_LOW); if(host->dma < 0) { @@ -1012,7 +1032,7 @@ static int imxmci_probe(struct platform_device *pdev) ret = -EBUSY; goto out; } - host->dma_allocated=1; + host->dma_allocated = 1; imx_dma_setup_handlers(host->dma, imxmci_dma_irq, NULL, host); tasklet_init(&host->tasklet, imxmci_tasklet_fnc, (unsigned long)host); @@ -1032,7 +1052,7 @@ static int imxmci_probe(struct platform_device *pdev) host->timer.data = (unsigned long)host; host->timer.function = imxmci_check_status; add_timer(&host->timer); - mod_timer(&host->timer, jiffies + (HZ>>1)); + mod_timer(&host->timer, jiffies + (HZ >> 1)); platform_set_drvdata(pdev, mmc); @@ -1042,18 +1062,20 @@ static int imxmci_probe(struct platform_device *pdev) out: if (host) { - if(host->dma_allocated){ + if (host->dma_allocated) { imx_dma_free(host->dma); - host->dma_allocated=0; + host->dma_allocated = 0; } if (host->clk) { clk_disable(host->clk); clk_put(host->clk); } + if (host->base) + iounmap(host->base); } if (mmc) mmc_free_host(mmc); - release_mem_region(r->start, 0x100); + release_mem_region(r->start, resource_size(r)); return ret; } @@ -1072,9 +1094,10 @@ static int imxmci_remove(struct platform_device *pdev) mmc_remove_host(mmc); free_irq(host->irq, host); - if(host->dma_allocated){ + iounmap(host->base); + if (host->dma_allocated) { imx_dma_free(host->dma); - host->dma_allocated=0; + host->dma_allocated = 0; } tasklet_kill(&host->tasklet); @@ -1082,7 +1105,7 @@ static int imxmci_remove(struct platform_device *pdev) clk_disable(host->clk); clk_put(host->clk); - release_mem_region(host->res->start, 0x100); + release_mem_region(host->res->start, resource_size(host->res)); mmc_free_host(mmc); } @@ -1109,7 +1132,7 @@ static int imxmci_resume(struct platform_device *dev) if (mmc) { host = mmc_priv(mmc); - if(host) + if (host) set_bit(IMXMCI_PEND_SET_INIT_b, &host->pending_events); ret = mmc_resume_host(mmc); } diff --git a/drivers/mmc/host/imxmmc.h b/drivers/mmc/host/imxmmc.h index e5339e334db..09d5d4ee3a7 100644 --- a/drivers/mmc/host/imxmmc.h +++ b/drivers/mmc/host/imxmmc.h @@ -1,24 +1,21 @@ +#define MMC_REG_STR_STP_CLK 0x00 +#define MMC_REG_STATUS 0x04 +#define MMC_REG_CLK_RATE 0x08 +#define MMC_REG_CMD_DAT_CONT 0x0C +#define MMC_REG_RES_TO 0x10 +#define MMC_REG_READ_TO 0x14 +#define MMC_REG_BLK_LEN 0x18 +#define MMC_REG_NOB 0x1C +#define MMC_REG_REV_NO 0x20 +#define MMC_REG_INT_MASK 0x24 +#define MMC_REG_CMD 0x28 +#define MMC_REG_ARGH 0x2C +#define MMC_REG_ARGL 0x30 +#define MMC_REG_RES_FIFO 0x34 +#define MMC_REG_BUFFER_ACCESS 0x38 -# define __REG16(x) (*((volatile u16 *)IO_ADDRESS(x))) - -#define MMC_STR_STP_CLK __REG16(IMX_MMC_BASE + 0x00) -#define MMC_STATUS __REG16(IMX_MMC_BASE + 0x04) -#define MMC_CLK_RATE __REG16(IMX_MMC_BASE + 0x08) -#define MMC_CMD_DAT_CONT __REG16(IMX_MMC_BASE + 0x0C) -#define MMC_RES_TO __REG16(IMX_MMC_BASE + 0x10) -#define MMC_READ_TO __REG16(IMX_MMC_BASE + 0x14) -#define MMC_BLK_LEN __REG16(IMX_MMC_BASE + 0x18) -#define MMC_NOB __REG16(IMX_MMC_BASE + 0x1C) -#define MMC_REV_NO __REG16(IMX_MMC_BASE + 0x20) -#define MMC_INT_MASK __REG16(IMX_MMC_BASE + 0x24) -#define MMC_CMD __REG16(IMX_MMC_BASE + 0x28) -#define MMC_ARGH __REG16(IMX_MMC_BASE + 0x2C) -#define MMC_ARGL __REG16(IMX_MMC_BASE + 0x30) -#define MMC_RES_FIFO __REG16(IMX_MMC_BASE + 0x34) -#define MMC_BUFFER_ACCESS __REG16(IMX_MMC_BASE + 0x38) -#define MMC_BUFFER_ACCESS_OFS 0x38 - - +#define STR_STP_CLK_IPG_CLK_GATE_DIS (1<<15) +#define STR_STP_CLK_IPG_PERCLK_GATE_DIS (1<<14) #define STR_STP_CLK_ENDIAN (1<<5) #define STR_STP_CLK_RESET (1<<3) #define STR_STP_CLK_ENABLE (1<<2) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 2fadf323c69..1bcbdd6763a 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -500,7 +500,7 @@ static int mmci_probe(struct amba_device *dev, void *id) } host = mmc_priv(mmc); - host->clk = clk_get(&dev->dev, "MCLK"); + host->clk = clk_get(&dev->dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); host->clk = NULL; diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 1b9fc3c6b87..67d7b7fef08 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1015,7 +1015,7 @@ static int mmc_omap_get_dma_channel(struct mmc_omap_host *host, struct mmc_data } if (is_read) { - if (host->id == 1) { + if (host->id == 0) { sync_dev = OMAP_DMA_MMC_RX; dma_dev_name = "MMC1 read"; } else { @@ -1023,7 +1023,7 @@ static int mmc_omap_get_dma_channel(struct mmc_omap_host *host, struct mmc_data dma_dev_name = "MMC2 read"; } } else { - if (host->id == 1) { + if (host->id == 0) { sync_dev = OMAP_DMA_MMC_TX; dma_dev_name = "MMC1 write"; } else { @@ -1317,7 +1317,7 @@ static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id) host->slots[id] = slot; mmc->caps = 0; - if (host->pdata->conf.wire4) + if (host->pdata->slots[id].wires >= 4) mmc->caps |= MMC_CAP_4_BIT_DATA; mmc->ops = &mmc_omap_ops; @@ -1451,6 +1451,7 @@ static int __init mmc_omap_probe(struct platform_device *pdev) host->irq = irq; host->use_dma = 1; + host->dev->dma_mask = &pdata->dma_mask; host->dma_ch = -1; host->irq = irq; diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index ebfaa996093..f88cc740635 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -26,11 +26,12 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/mmc/host.h> +#include <linux/io.h> -#include <asm/dma.h> -#include <asm/io.h> #include <asm/sizes.h> +#include <mach/dma.h> +#include <mach/hardware.h> #include <mach/pxa-regs.h> #include <mach/mmc.h> @@ -533,7 +534,7 @@ static int pxamci_probe(struct platform_device *pdev) host->pdata = pdev->dev.platform_data; host->clkrt = CLKRT_OFF; - host->clk = clk_get(&pdev->dev, "MMCCLK"); + host->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(host->clk)) { ret = PTR_ERR(host->clk); host->clk = NULL; diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 3b2085b5776..fcc98a4cce3 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -25,7 +25,7 @@ #include <mach/regs-sdi.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/mci.h> +#include <plat/mci.h> #include "s3cmci.h" diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 76a76751da3..6659b2275c0 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -37,9 +37,9 @@ #define OPCODE_NORM_READ 0x03 /* Read data bytes (low frequency) */ #define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ #define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ -#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ +#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ #define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ -#define OPCODE_BE 0xc7 /* Erase whole flash block */ +#define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */ #define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ #define OPCODE_RDID 0x9f /* Read JEDEC ID */ @@ -167,7 +167,7 @@ static int wait_till_ready(struct m25p *flash) * * Returns 0 if successful, non-zero otherwise. */ -static int erase_block(struct m25p *flash) +static int erase_chip(struct m25p *flash) { DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB\n", flash->spi->dev.bus_id, __func__, @@ -181,7 +181,7 @@ static int erase_block(struct m25p *flash) write_enable(flash); /* Set up command buffer. */ - flash->command[0] = OPCODE_BE; + flash->command[0] = OPCODE_CHIP_ERASE; spi_write(flash->spi, flash->command, 1); @@ -250,15 +250,18 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr) mutex_lock(&flash->lock); - /* REVISIT in some cases we could speed up erasing large regions - * by using OPCODE_SE instead of OPCODE_BE_4K - */ - - /* now erase those sectors */ - if (len == flash->mtd.size && erase_block(flash)) { + /* whole-chip erase? */ + if (len == flash->mtd.size && erase_chip(flash)) { instr->state = MTD_ERASE_FAILED; mutex_unlock(&flash->lock); return -EIO; + + /* REVISIT in some cases we could speed up erasing large regions + * by using OPCODE_SE instead of OPCODE_BE_4K. We may have set up + * to use "small sector erase", but that's not always optimal. + */ + + /* "sector"-at-a-time erase */ } else { while (len) { if (erase_sector(flash, addr)) { @@ -574,10 +577,11 @@ static struct flash_info *__devinit jedec_probe(struct spi_device *spi) for (tmp = 0, info = m25p_data; tmp < ARRAY_SIZE(m25p_data); tmp++, info++) { - if (info->jedec_id == jedec) - if (ext_jedec != 0 && info->ext_id != ext_jedec) + if (info->jedec_id == jedec) { + if (info->ext_id != 0 && info->ext_id != ext_jedec) continue; return info; + } } dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec); return NULL; diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c index 3aa018c092f..42969fe051b 100644 --- a/drivers/mtd/maps/dc21285.c +++ b/drivers/mtd/maps/dc21285.c @@ -32,16 +32,15 @@ static struct mtd_info *dc21285_mtd; */ static void nw_en_write(void) { - extern spinlock_t gpio_lock; unsigned long flags; /* * we want to write a bit pattern XXX1 to Xilinx to enable * the write gate, which will be open for about the next 2ms. */ - spin_lock_irqsave(&gpio_lock, flags); - cpld_modify(1, 1); - spin_unlock_irqrestore(&gpio_lock, flags); + spin_lock_irqsave(&nw_gpio_lock, flags); + nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE); + spin_unlock_irqrestore(&nw_gpio_lock, flags); /* * let the ISA bus to catch on... diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c index dcdb1f17577..3ea1de9be72 100644 --- a/drivers/mtd/maps/ixp2000.c +++ b/drivers/mtd/maps/ixp2000.c @@ -170,7 +170,7 @@ static int ixp2000_flash_probe(struct platform_device *dev) err = -ENOMEM; goto Error; } - memzero(info, sizeof(struct ixp2000_flash_info)); + memset(info, 0, sizeof(struct ixp2000_flash_info)); platform_set_drvdata(dev, info); diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c index 9c7a5fbd4e5..16555cbeaea 100644 --- a/drivers/mtd/maps/ixp4xx.c +++ b/drivers/mtd/maps/ixp4xx.c @@ -201,7 +201,7 @@ static int ixp4xx_flash_probe(struct platform_device *dev) err = -ENOMEM; goto Error; } - memzero(info, sizeof(struct ixp4xx_flash_info)); + memset(info, 0, sizeof(struct ixp4xx_flash_info)); platform_set_drvdata(dev, info); diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index 42d844f8f6b..dfbf3f270ce 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c @@ -19,7 +19,7 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/concat.h> -#include <asm/io.h> +#include <linux/io.h> #define MAX_RESOURCES 4 @@ -27,7 +27,6 @@ struct physmap_flash_info { struct mtd_info *mtd[MAX_RESOURCES]; struct mtd_info *cmtd; struct map_info map[MAX_RESOURCES]; - struct resource *res; #ifdef CONFIG_MTD_PARTITIONS int nr_parts; struct mtd_partition *parts; @@ -70,16 +69,7 @@ static int physmap_flash_remove(struct platform_device *dev) #endif map_destroy(info->mtd[i]); } - - if (info->map[i].virt != NULL) - iounmap(info->map[i].virt); - } - - if (info->res != NULL) { - release_resource(info->res); - kfree(info->res); } - return 0; } @@ -101,7 +91,8 @@ static int physmap_flash_probe(struct platform_device *dev) if (physmap_data == NULL) return -ENODEV; - info = kzalloc(sizeof(struct physmap_flash_info), GFP_KERNEL); + info = devm_kzalloc(&dev->dev, sizeof(struct physmap_flash_info), + GFP_KERNEL); if (info == NULL) { err = -ENOMEM; goto err_out; @@ -114,10 +105,10 @@ static int physmap_flash_probe(struct platform_device *dev) (unsigned long long)(dev->resource[i].end - dev->resource[i].start + 1), (unsigned long long)dev->resource[i].start); - info->res = request_mem_region(dev->resource[i].start, - dev->resource[i].end - dev->resource[i].start + 1, - dev->dev.bus_id); - if (info->res == NULL) { + if (!devm_request_mem_region(&dev->dev, + dev->resource[i].start, + dev->resource[i].end - dev->resource[i].start + 1, + dev->dev.bus_id)) { dev_err(&dev->dev, "Could not reserve memory region\n"); err = -ENOMEM; goto err_out; @@ -129,7 +120,8 @@ static int physmap_flash_probe(struct platform_device *dev) info->map[i].bankwidth = physmap_data->width; info->map[i].set_vpp = physmap_data->set_vpp; - info->map[i].virt = ioremap(info->map[i].phys, info->map[i].size); + info->map[i].virt = devm_ioremap(&dev->dev, info->map[i].phys, + info->map[i].size); if (info->map[i].virt == NULL) { dev_err(&dev->dev, "Failed to ioremap flash region\n"); err = EIO; diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 1c2e9450d66..f8ae0400c49 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -408,7 +408,7 @@ config MTD_NAND_FSL_UPM config MTD_NAND_MXC tristate "MXC NAND support" - depends on ARCH_MX2 + depends on ARCH_MX2 || ARCH_MX3 help This enables the driver for the NAND flash controller on the MXC processors. diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c index 024e3fffd4b..a83192f80eb 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/fsl_upm.c @@ -163,9 +163,11 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun, ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0); #ifdef CONFIG_MTD_OF_PARTS - if (ret == 0) - ret = of_mtd_parse_partitions(fun->dev, &fun->mtd, - flash_np, &fun->parts); + if (ret == 0) { + ret = of_mtd_parse_partitions(fun->dev, flash_np, &fun->parts); + if (ret < 0) + goto err; + } #endif if (ret > 0) ret = add_mtd_partitions(&fun->mtd, fun->parts, ret); diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 75c89903902..9bd6c9ac844 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -141,6 +141,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev, } lpcctl = pci_resource_start(pdev, 0); + pci_dev_put(pdev); if (!request_region(lpcctl, 4, driver_name)) { err = -EBUSY; diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 64b3be1ea0a..fc414449561 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -269,6 +269,7 @@ static struct pxa3xx_nand_timing stm2GbX16_timing = { static struct pxa3xx_nand_flash stm2GbX16 = { .timing = &stm2GbX16_timing, + .cmdset = &largepage_cmdset, .page_per_block = 64, .page_size = 2048, .flash_width = 16, @@ -1079,7 +1080,7 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) this = &info->nand_chip; mtd->priv = info; - info->clk = clk_get(&pdev->dev, "NANDCLK"); + info->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(info->clk)) { dev_err(&pdev->dev, "failed to get nand clock\n"); ret = PTR_ERR(info->clk); diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 556139ed1fd..8e375d5fe23 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -45,8 +45,8 @@ #include <asm/io.h> -#include <asm/plat-s3c/regs-nand.h> -#include <asm/plat-s3c/nand.h> +#include <plat/regs-nand.h> +#include <plat/nand.h> #ifdef CONFIG_MTD_NAND_S3C2410_HWECC static int hardware_ecc = 1; @@ -818,7 +818,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, goto exit_error; } - memzero(info, sizeof(*info)); + memset(info, 0, sizeof(*info)); platform_set_drvdata(pdev, info); spin_lock_init(&info->controller.lock); @@ -883,7 +883,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev, goto exit_error; } - memzero(info->mtds, size); + memset(info->mtds, 0, size); /* initialise all possible chips */ diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index e39b21d3e16..d1e0b8e7224 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -32,19 +32,18 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/mach/flash.h> -#include <asm/arch/gpmc.h> -#include <asm/arch/onenand.h> -#include <asm/arch/gpio.h> -#include <asm/arch/pm.h> +#include <mach/gpmc.h> +#include <mach/onenand.h> +#include <mach/gpio.h> +#include <mach/pm.h> -#include <linux/dma-mapping.h> -#include <asm/dma-mapping.h> -#include <asm/arch/dma.h> +#include <mach/dma.h> -#include <asm/arch/board.h> +#include <mach/board.h> #define DRIVER_NAME "omap2-onenand" @@ -150,7 +149,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state) INIT_COMPLETION(c->irq_done); if (c->gpio_irq) { - result = omap_get_gpio_datain(c->gpio_irq); + result = gpio_get_value(c->gpio_irq); if (result == -1) { ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS); intr = read_reg(c, ONENAND_REG_INTERRUPT); @@ -635,9 +634,9 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) "OneNAND\n", c->gpio_irq); goto err_iounmap; } - omap_set_gpio_direction(c->gpio_irq, 1); + gpio_direction_input(c->gpio_irq); - if ((r = request_irq(OMAP_GPIO_IRQ(c->gpio_irq), + if ((r = request_irq(gpio_to_irq(c->gpio_irq), omap2_onenand_interrupt, IRQF_TRIGGER_RISING, pdev->dev.driver->name, c)) < 0) goto err_release_gpio; @@ -724,7 +723,7 @@ err_release_dma: if (c->dma_channel != -1) omap_free_dma(c->dma_channel); if (c->gpio_irq) - free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c); + free_irq(gpio_to_irq(c->gpio_irq), c); err_release_gpio: if (c->gpio_irq) omap_free_gpio(c->gpio_irq); @@ -761,7 +760,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) omap2_onenand_shutdown(pdev); platform_set_drvdata(pdev, NULL); if (c->gpio_irq) { - free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c); + free_irq(gpio_to_irq(c->gpio_irq), c); omap_free_gpio(c->gpio_irq); } iounmap(c->onenand.base); diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index e04bcf1dff8..d8966bae0e0 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -1022,7 +1022,7 @@ int ubi_eba_copy_leb(struct ubi_device *ubi, int from, int to, } /* - * OK, now the LEB is locked and we can safely start moving iy. Since + * OK, now the LEB is locked and we can safely start moving it. Since * this function utilizes thie @ubi->peb1_buf buffer which is shared * with some other functions, so lock the buffer by taking the * @ubi->buf_mutex. diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index 4f2daa5bbec..41d47e1cf15 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -320,7 +320,7 @@ static int compare_lebs(struct ubi_device *ubi, const struct ubi_scan_leb *seb, } err = ubi_io_read_data(ubi, buf, pnum, 0, len); - if (err && err != UBI_IO_BITFLIPS) + if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG) goto out_free_buf; data_crc = be32_to_cpu(vid_hdr->data_crc); diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 05d70937b54..dcb6dac1dc5 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -1396,7 +1396,8 @@ int ubi_thread(void *u) ubi_msg("%s: %d consecutive failures", ubi->bgt_name, WL_MAX_FAILURES); ubi_ro_mode(ubi); - break; + ubi->thread_enabled = 0; + continue; } } else failures = 0; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 11f143f4adf..231eeaf1d55 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1825,9 +1825,10 @@ config FEC2 config FEC_MPC52xx tristate "MPC52xx FEC driver" - depends on PPC_MPC52xx && PPC_BESTCOMM_FEC + depends on PPC_MPC52xx && PPC_BESTCOMM select CRC32 select PHYLIB + select PPC_BESTCOMM_FEC ---help--- This option enables support for the MPC5200's on-chip Fast Ethernet Controller diff --git a/drivers/net/Makefile b/drivers/net/Makefile index f19acf8b922..017383ad5ec 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -114,7 +114,7 @@ obj-$(CONFIG_EL2) += 3c503.o 8390p.o obj-$(CONFIG_NE2000) += ne.o 8390p.o obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o obj-$(CONFIG_HPLAN) += hp.o 8390p.o -obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o +obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index d07e3f14895..a1a3d0e5d2b 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -3144,6 +3144,28 @@ bnx2_has_work(struct bnx2_napi *bnapi) return 0; } +static void +bnx2_chk_missed_msi(struct bnx2 *bp) +{ + struct bnx2_napi *bnapi = &bp->bnx2_napi[0]; + u32 msi_ctrl; + + if (bnx2_has_work(bnapi)) { + msi_ctrl = REG_RD(bp, BNX2_PCICFG_MSI_CONTROL); + if (!(msi_ctrl & BNX2_PCICFG_MSI_CONTROL_ENABLE)) + return; + + if (bnapi->last_status_idx == bp->idle_chk_status_idx) { + REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl & + ~BNX2_PCICFG_MSI_CONTROL_ENABLE); + REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl); + bnx2_msi(bp->irq_tbl[0].vector, bnapi); + } + } + + bp->idle_chk_status_idx = bnapi->last_status_idx; +} + static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi) { struct status_block *sblk = bnapi->status_blk.msi; @@ -3218,14 +3240,15 @@ static int bnx2_poll(struct napi_struct *napi, int budget) work_done = bnx2_poll_work(bp, bnapi, work_done, budget); - if (unlikely(work_done >= budget)) - break; - /* bnapi->last_status_idx is used below to tell the hw how * much work has been processed, so we must read it before * checking for more work. */ bnapi->last_status_idx = sblk->status_idx; + + if (unlikely(work_done >= budget)) + break; + rmb(); if (likely(!bnx2_has_work(bnapi))) { netif_rx_complete(bp->dev, napi); @@ -4570,6 +4593,8 @@ bnx2_init_chip(struct bnx2 *bp) for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) bp->bnx2_napi[i].last_status_idx = 0; + bp->idle_chk_status_idx = 0xffff; + bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE; /* Set up how to generate a link change interrupt. */ @@ -5718,6 +5743,10 @@ bnx2_timer(unsigned long data) if (atomic_read(&bp->intr_sem) != 0) goto bnx2_restart_timer; + if ((bp->flags & (BNX2_FLAG_USING_MSI | BNX2_FLAG_ONE_SHOT_MSI)) == + BNX2_FLAG_USING_MSI) + bnx2_chk_missed_msi(bp); + bnx2_send_heart_beat(bp); bp->stats_blk->stat_FwRxDrop = diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 617d9534016..0b032c3c7b6 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -378,6 +378,9 @@ struct l2_fhdr { * pci_config_l definition * offset: 0000 */ +#define BNX2_PCICFG_MSI_CONTROL 0x00000058 +#define BNX2_PCICFG_MSI_CONTROL_ENABLE (1L<<16) + #define BNX2_PCICFG_MISC_CONFIG 0x00000068 #define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2) #define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3) @@ -6863,6 +6866,9 @@ struct bnx2 { u8 num_tx_rings; u8 num_rx_rings; + + u32 idle_chk_status_idx; + }; #define REG_RD(bp, offset) \ diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index d6c7d2aa761..7092df50ff7 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -1035,10 +1035,6 @@ MODULE_PARM_DESC(copybreak, "Receive copy threshold"); * @pdev: the PCI device that received the packet * @fl: the SGE free list holding the packet * @len: the actual packet length, excluding any SGE padding - * @dma_pad: padding at beginning of buffer left by SGE DMA - * @skb_pad: padding to be used if the packet is copied - * @copy_thres: length threshold under which a packet should be copied - * @drop_thres: # of remaining buffers before we start dropping packets * * Get the next packet from a free list and complete setup of the * sk_buff. If the packet is small we make a copy and recycle the diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index 7107620f615..0b729f7d91f 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -170,11 +170,7 @@ static char version[] __initdata = /* The cs8900 has 4 IRQ pins, software selectable. cs8900_irq_map maps them to system IRQ numbers. This mapping is card specific and is set to the configuration of the Cirrus Eval board for this chip. */ -#ifdef CONFIG_ARCH_CLPS7500 -static unsigned int netcard_portlist[] __used __initdata = - { 0x80090303, 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0}; -static unsigned int cs8900_irq_map[] = {12,0,0,0}; -#elif defined(CONFIG_SH_HICOSH4) +#if defined(CONFIG_SH_HICOSH4) static unsigned int netcard_portlist[] __used __initdata = { 0x0300, 0}; static unsigned int cs8900_irq_map[] = {1,0,0,0}; diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 523b9716a54..d115a6d30f2 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1893,12 +1893,17 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ctrl |= E1000_CTRL_PHY_RST; } ret_val = e1000_acquire_swflag_ich8lan(hw); + /* Whether or not the swflag was acquired, we need to reset the part */ hw_dbg(hw, "Issuing a global reset to ich8lan"); ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(20); - /* release the swflag because it is not reset by hardware reset */ - e1000_release_swflag_ich8lan(hw); + if (!ret_val) { + /* release the swflag because it is not reset by + * hardware reset + */ + e1000_release_swflag_ich8lan(hw); + } ret_val = e1000e_get_auto_rd_done(hw); if (ret_val) { diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 91795f78c3e..122539a0e1f 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -345,7 +345,6 @@ no_buffers: /** * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers * @adapter: address of board private structure - * @rx_ring: pointer to receive ring structure * @cleaned_count: number of buffers to allocate this pass **/ diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index e1b441effbb..c414554ac32 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -568,6 +568,17 @@ static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end) return erxrdpt; } +/* + * Calculate wrap around when reading beyond the end of the RX buffer + */ +static u16 rx_packet_start(u16 ptr) +{ + if (ptr + RSV_SIZE > RXEND_INIT) + return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1); + else + return ptr + RSV_SIZE; +} + static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end) { u16 erxrdpt; @@ -938,8 +949,9 @@ static void enc28j60_hw_rx(struct net_device *ndev) skb->dev = ndev; skb_reserve(skb, NET_IP_ALIGN); /* copy the packet from the receive buffer */ - enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv), - len, skb_put(skb, len)); + enc28j60_mem_read(priv, + rx_packet_start(priv->next_pk_ptr), + len, skb_put(skb, len)); if (netif_msg_pktdata(priv)) dump_packet(__func__, skb->len, skb->data); skb->protocol = eth_type_trans(skb, ndev); diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c index fbbd3e660c2..c01e290d09d 100644 --- a/drivers/net/hp-plus.c +++ b/drivers/net/hp-plus.c @@ -230,7 +230,7 @@ static int __init hpp_probe1(struct net_device *dev, int ioaddr) dev->open = &hpp_open; dev->stop = &hpp_close; #ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = ei_poll; + dev->poll_controller = eip_poll; #endif ei_status.name = name; diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 1cbae85b142..20d27e622ec 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1980,7 +1980,6 @@ static void igb_configure_rx(struct igb_adapter *adapter) /** * igb_free_tx_resources - Free Tx Resources per Queue - * @adapter: board private structure * @tx_ring: Tx descriptor ring for a specific queue * * Free all transmit software resources @@ -2033,7 +2032,6 @@ static void igb_unmap_and_free_tx_resource(struct igb_adapter *adapter, /** * igb_clean_tx_ring - Free Tx Buffers - * @adapter: board private structure * @tx_ring: ring to be cleaned **/ static void igb_clean_tx_ring(struct igb_ring *tx_ring) @@ -2080,7 +2078,6 @@ static void igb_clean_all_tx_rings(struct igb_adapter *adapter) /** * igb_free_rx_resources - Free Rx Resources - * @adapter: board private structure * @rx_ring: ring to clean the resources from * * Free all receive software resources @@ -2120,7 +2117,6 @@ static void igb_free_all_rx_resources(struct igb_adapter *adapter) /** * igb_clean_rx_ring - Free Rx Buffers per Queue - * @adapter: board private structure * @rx_ring: ring to free buffers from **/ static void igb_clean_rx_ring(struct igb_ring *rx_ring) diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c index ba445133f3e..0e081292f4f 100644 --- a/drivers/net/irda/pxaficp_ir.c +++ b/drivers/net/irda/pxaficp_ir.c @@ -22,8 +22,9 @@ #include <net/irda/wrapper.h> #include <net/irda/irda_device.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/irda.h> +#include <mach/hardware.h> #include <mach/pxa-regs.h> #include <mach/regs-uart.h> diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c index a95188948de..0813b5295f5 100644 --- a/drivers/net/irda/sa1100_ir.c +++ b/drivers/net/irda/sa1100_ir.c @@ -36,7 +36,7 @@ #include <net/irda/irda_device.h> #include <asm/irq.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/hardware.h> #include <asm/mach/irda.h> diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 36f2bb666bf..5236f633ee3 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1320,7 +1320,6 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) * ixgbe_intr - legacy mode Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure - * @pt_regs: CPU registers structure **/ static irqreturn_t ixgbe_intr(int irq, void *data) { @@ -2330,7 +2329,7 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter, * Once we know the feature-set enabled for the device, we'll cache * the register offset the descriptor ring is assigned to. **/ -static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) +static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) { int feature_mask = 0, rss_i; int i, txr_idx, rxr_idx; @@ -2367,7 +2366,7 @@ static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) * number of queues at compile-time. The polling_netdev array is * intended for Multiqueue, but should work fine with a single queue. **/ -static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter) +static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter) { int i; @@ -2408,8 +2407,7 @@ err_tx_ring_allocation: * Attempt to configure the interrupts using the best available * capabilities of the hardware and the kernel. **/ -static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter - *adapter) +static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter) { int err = 0; int vector, v_budget; @@ -2501,7 +2499,7 @@ static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter) * - Hardware queue count (num_*_queues) * - defined by miscellaneous hardware support/features (RSS, etc.) **/ -static int __devinit ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter) +static int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter) { int err; diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 42394505bb5..590039cbb14 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -70,6 +70,9 @@ static void macvlan_broadcast(struct sk_buff *skb, struct sk_buff *nskb; unsigned int i; + if (skb->protocol == htons(ETH_P_PAUSE)) + return; + for (i = 0; i < MACVLAN_HASH_SIZE; i++) { hlist_for_each_entry_rcu(vlan, n, &port->vlan_hash[i], hlist) { dev = vlan->dev; diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 468921b8f4b..90a0281d15e 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -753,6 +753,7 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) struct mlx4_priv *priv = mlx4_priv(dev); int err; int port; + __be32 ib_port_default_caps; err = mlx4_init_uar_table(dev); if (err) { @@ -852,6 +853,13 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) } for (port = 1; port <= dev->caps.num_ports; port++) { + ib_port_default_caps = 0; + err = mlx4_get_port_ib_caps(dev, port, &ib_port_default_caps); + if (err) + mlx4_warn(dev, "failed to get port %d default " + "ib capabilities (%d). Continuing with " + "caps = 0\n", port, err); + dev->caps.ib_port_def_cap[port] = ib_port_default_caps; err = mlx4_SET_PORT(dev, port); if (err) { mlx4_err(dev, "Failed to set port %d, aborting\n", diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h index 56a2e213fe6..34c909deaff 100644 --- a/drivers/net/mlx4/mlx4.h +++ b/drivers/net/mlx4/mlx4.h @@ -385,5 +385,6 @@ void mlx4_init_mac_table(struct mlx4_dev *dev, struct mlx4_mac_table *table); void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table); int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port); +int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps); #endif /* MLX4_H */ diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c index e2fdab42c4c..0a057e5dc63 100644 --- a/drivers/net/mlx4/port.c +++ b/drivers/net/mlx4/port.c @@ -258,6 +258,42 @@ out: } EXPORT_SYMBOL_GPL(mlx4_unregister_vlan); +int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps) +{ + struct mlx4_cmd_mailbox *inmailbox, *outmailbox; + u8 *inbuf, *outbuf; + int err; + + inmailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(inmailbox)) + return PTR_ERR(inmailbox); + + outmailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(outmailbox)) { + mlx4_free_cmd_mailbox(dev, inmailbox); + return PTR_ERR(outmailbox); + } + + inbuf = inmailbox->buf; + outbuf = outmailbox->buf; + memset(inbuf, 0, 256); + memset(outbuf, 0, 256); + inbuf[0] = 1; + inbuf[1] = 1; + inbuf[2] = 1; + inbuf[3] = 1; + *(__be16 *) (&inbuf[16]) = cpu_to_be16(0x0015); + *(__be32 *) (&inbuf[20]) = cpu_to_be32(port); + + err = mlx4_cmd_box(dev, inmailbox->dma, outmailbox->dma, port, 3, + MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C); + if (!err) + *caps = *(__be32 *) (outbuf + 84); + mlx4_free_cmd_mailbox(dev, inmailbox); + mlx4_free_cmd_mailbox(dev, outmailbox); + return err; +} + int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port) { struct mlx4_cmd_mailbox *mailbox; @@ -273,7 +309,8 @@ int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port) ((u8 *) mailbox->buf)[3] = 6; ((__be16 *) mailbox->buf)[4] = cpu_to_be16(1 << 15); ((__be16 *) mailbox->buf)[6] = cpu_to_be16(1 << 15); - } + } else + ((__be32 *) mailbox->buf)[1] = dev->caps.ib_port_def_cap[port]; err = mlx4_cmd(dev, mailbox->dma, port, is_eth, MLX4_CMD_SET_PORT, MLX4_CMD_TIME_CLASS_B); diff --git a/drivers/net/netx-eth.c b/drivers/net/netx-eth.c index b9bed82e1d2..b289a0a2b94 100644 --- a/drivers/net/netx-eth.c +++ b/drivers/net/netx-eth.c @@ -401,6 +401,8 @@ static int netx_eth_drv_probe(struct platform_device *pdev) priv->xmac_base = priv->xc->xmac_base; priv->sram_base = priv->xc->sram_base; + spin_lock_init(&priv->lock); + ret = pfifo_request(PFIFO_MASK(priv->id)); if (ret) { printk("unable to request PFIFO\n"); diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index b37a498939a..0418045166c 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -779,6 +779,7 @@ static struct pcmcia_device_id axnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2), PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8), PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609), + PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEtherCard", 0x281f1c5d, 0x7ef26116), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FEP501", 0x281f1c5d, 0x2e272058), @@ -1174,7 +1175,6 @@ static int ei_start_xmit(struct sk_buff *skb, struct net_device *dev) * ax_interrupt - handle the interrupts from an 8390 * @irq: interrupt number * @dev_id: a pointer to the net_device - * @regs: unused * * Handle the ether interface interrupts. We pull packets from * the 8390 via the card specific functions and fire them at the networking diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index cf3cca4642f..f51944b28cf 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -349,7 +349,7 @@ static int ibmtr_suspend(struct pcmcia_device *link) return 0; } -static int ibmtr_resume(struct pcmcia_device *link) +static int __devinit ibmtr_resume(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; struct net_device *dev = info->dev; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index e40d6301aa7..ce486f09449 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1693,7 +1693,6 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8), PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76), PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e), - PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875), PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f), PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b), diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 55bc24b234e..25acbbde4a6 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -227,8 +227,17 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) if (r) return ERR_PTR(r); - /* If the phy_id is all Fs or all 0s, there is no device there */ - if ((0xffff == phy_id) || (0x00 == phy_id)) + /* If the phy_id is mostly Fs, there is no device there */ + if ((phy_id & 0x1fffffff) == 0x1fffffff) + return NULL; + + /* + * Broken hardware is sometimes missing the pull down resistor on the + * MDIO line, which results in reads to non-existent devices returning + * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent + * device as well. + */ + if (phy_id == 0) return NULL; dev = phy_device_create(bus, addr, phy_id); diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 8874497b6bb..dd3b2447e85 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -34,6 +34,8 @@ #define MII_VSC8244_IMASK_DUPLEX 0x1000 #define MII_VSC8244_IMASK_MASK 0xf000 +#define MII_VSC8221_IMASK_MASK 0xa000 + /* Vitesse Interrupt Status Register */ #define MII_VSC8244_ISTAT 0x1a #define MII_VSC8244_ISTAT_STATUS 0x8000 @@ -49,6 +51,12 @@ #define MII_VSC8244_AUXCONSTAT_GBIT 0x0010 #define MII_VSC8244_AUXCONSTAT_100 0x0008 +#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */ +#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004 + +#define PHY_ID_VSC8244 0x000fc6c0 +#define PHY_ID_VSC8221 0x000fc550 + MODULE_DESCRIPTION("Vitesse PHY driver"); MODULE_AUTHOR("Kriston Carson"); MODULE_LICENSE("GPL"); @@ -95,13 +103,15 @@ static int vsc824x_ack_interrupt(struct phy_device *phydev) return (err < 0) ? err : 0; } -static int vsc824x_config_intr(struct phy_device *phydev) +static int vsc82xx_config_intr(struct phy_device *phydev) { int err; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, MII_VSC8244_IMASK, - MII_VSC8244_IMASK_MASK); + phydev->drv->phy_id == PHY_ID_VSC8244 ? + MII_VSC8244_IMASK_MASK : + MII_VSC8221_IMASK_MASK); else { /* * The Vitesse PHY cannot clear the interrupt @@ -120,7 +130,7 @@ static int vsc824x_config_intr(struct phy_device *phydev) /* Vitesse 824x */ static struct phy_driver vsc8244_driver = { - .phy_id = 0x000fc6c0, + .phy_id = PHY_ID_VSC8244, .name = "Vitesse VSC8244", .phy_id_mask = 0x000fffc0, .features = PHY_GBIT_FEATURES, @@ -129,19 +139,55 @@ static struct phy_driver vsc8244_driver = { .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, .ack_interrupt = &vsc824x_ack_interrupt, - .config_intr = &vsc824x_config_intr, + .config_intr = &vsc82xx_config_intr, .driver = { .owner = THIS_MODULE,}, }; -static int __init vsc8244_init(void) +static int vsc8221_config_init(struct phy_device *phydev) { - return phy_driver_register(&vsc8244_driver); + int err; + + err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT, + MII_VSC8221_AUXCONSTAT_INIT); + return err; + + /* Perhaps we should set EXT_CON1 based on the interface? + Options are 802.3Z SerDes or SGMII */ +} + +/* Vitesse 8221 */ +static struct phy_driver vsc8221_driver = { + .phy_id = PHY_ID_VSC8221, + .phy_id_mask = 0x000ffff0, + .name = "Vitesse VSC8221", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &vsc8221_config_init, + .config_aneg = &genphy_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &vsc824x_ack_interrupt, + .config_intr = &vsc82xx_config_intr, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init vsc82xx_init(void) +{ + int err; + + err = phy_driver_register(&vsc8244_driver); + if (err < 0) + return err; + err = phy_driver_register(&vsc8221_driver); + if (err < 0) + phy_driver_unregister(&vsc8244_driver); + return err; } -static void __exit vsc8244_exit(void) +static void __exit vsc82xx_exit(void) { phy_driver_unregister(&vsc8244_driver); + phy_driver_unregister(&vsc8221_driver); } -module_init(vsc8244_init); -module_exit(vsc8244_exit); +module_init(vsc82xx_init); +module_exit(vsc82xx_exit); diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 185b1dff10a..e98d9773158 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -1353,6 +1353,7 @@ static int pppol2tp_release(struct socket *sock) kfree_skb(skb); sock_put(sk); } + sock_put(sk); } release_sock(sk); diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index fa3a460f8e2..8e8337e8b07 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -1630,7 +1630,6 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev) * sis900_interrupt - sis900 interrupt handler * @irq: the irq number * @dev_instance: the client data object - * @regs: snapshot of processor context * * The interrupt handler does all of the Rx thread work, * and cleans up after the Tx thread diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index b185cd12269..9a16a79b67d 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -1735,7 +1735,7 @@ static const struct ethtool_ops smc911x_ethtool_ops = { * This routine has a simple purpose -- make the SMC chip generate an * interrupt, so an auto-detect routine can detect it, and find the IRQ, */ -static int __init smc911x_findirq(struct net_device *dev) +static int __devinit smc911x_findirq(struct net_device *dev) { struct smc911x_local *lp = netdev_priv(dev); int timeout = 20; @@ -1799,7 +1799,7 @@ static int __init smc911x_findirq(struct net_device *dev) * o actually GRAB the irq. * o GRAB the region */ -static int __init smc911x_probe(struct net_device *dev) +static int __devinit smc911x_probe(struct net_device *dev) { struct smc911x_local *lp = netdev_priv(dev); int i, retval; @@ -2048,7 +2048,7 @@ err_out: * 0 --> there is a device * anything else, error */ -static int smc911x_drv_probe(struct platform_device *pdev) +static int __devinit smc911x_drv_probe(struct platform_device *pdev) { #ifdef SMC_DYNAMIC_BUS_CONFIG struct smc911x_platdata *pd = pdev->dev.platform_data; @@ -2124,7 +2124,7 @@ out: return ret; } -static int smc911x_drv_remove(struct platform_device *pdev) +static int __devexit smc911x_drv_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct smc911x_local *lp = netdev_priv(ndev); @@ -2195,7 +2195,7 @@ static int smc911x_drv_resume(struct platform_device *dev) static struct platform_driver smc911x_driver = { .probe = smc911x_drv_probe, - .remove = smc911x_drv_remove, + .remove = __devexit_p(smc911x_drv_remove), .suspend = smc911x_drv_suspend, .resume = smc911x_drv_resume, .driver = { diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index fc80f250da3..35c56abf411 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1696,7 +1696,7 @@ static const struct ethtool_ops smc_ethtool_ops = { * I just deleted auto_irq.c, since it was never built... * --jgarzik */ -static int __init smc_findirq(struct smc_local *lp) +static int __devinit smc_findirq(struct smc_local *lp) { void __iomem *ioaddr = lp->base; int timeout = 20; @@ -1770,7 +1770,7 @@ static int __init smc_findirq(struct smc_local *lp) * o actually GRAB the irq. * o GRAB the region */ -static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr, +static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr, unsigned long irq_flags) { struct smc_local *lp = netdev_priv(dev); @@ -2126,7 +2126,7 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device * * 0 --> there is a device * anything else, error */ -static int smc_drv_probe(struct platform_device *pdev) +static int __devinit smc_drv_probe(struct platform_device *pdev) { struct smc91x_platdata *pd = pdev->dev.platform_data; struct smc_local *lp; @@ -2240,7 +2240,7 @@ static int smc_drv_probe(struct platform_device *pdev) return ret; } -static int smc_drv_remove(struct platform_device *pdev) +static int __devexit smc_drv_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct smc_local *lp = netdev_priv(ndev); @@ -2305,7 +2305,7 @@ static int smc_drv_resume(struct platform_device *dev) static struct platform_driver smc_driver = { .probe = smc_drv_probe, - .remove = smc_drv_remove, + .remove = __devexit_p(smc_drv_remove), .suspend = smc_drv_suspend, .resume = smc_drv_resume, .driver = { diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index a07cc9351c6..37e2cb4f4f8 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -527,7 +527,8 @@ struct smc_local { * as RX which can overrun memory and lose packets. */ #include <linux/dma-mapping.h> -#include <asm/dma.h> +#include <mach/dma.h> +#include <mach/hardware.h> #include <mach/pxa-regs.h> #ifdef SMC_insl diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c index b6435d0d71f..07599b49235 100644 --- a/drivers/net/spider_net.c +++ b/drivers/net/spider_net.c @@ -672,7 +672,6 @@ write_hash: /** * spider_net_prepare_tx_descr - fill tx descriptor with skb data * @card: card structure - * @descr: descriptor structure to fill out * @skb: packet to use * * returns 0 on success, <0 on failure. @@ -867,7 +866,6 @@ spider_net_release_tx_chain(struct spider_net_card *card, int brutal) /** * spider_net_kick_tx_dma - enables TX DMA processing * @card: card structure - * @descr: descriptor address to enable TX processing at * * This routine will start the transmit DMA running if * it is not already running. This routine ned only be @@ -1637,7 +1635,6 @@ spider_net_handle_error_irq(struct spider_net_card *card, u32 status_reg, * spider_net_interrupt - interrupt handler for spider_net * @irq: interrupt number * @ptr: pointer to net_device - * @regs: PU registers * * returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no * interrupt found raised by card. @@ -2419,7 +2416,6 @@ spider_net_undo_pci_setup(struct spider_net_card *card) /** * spider_net_setup_pci_dev - sets up the device in terms of PCI operations - * @card: card structure * @pdev: PCI device * * Returns the card structure or NULL if any errors occur diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 4291458955e..fed7eba65ea 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -1142,6 +1142,70 @@ static int gem_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } +static void gem_pcs_reset(struct gem *gp) +{ + int limit; + u32 val; + + /* Reset PCS unit. */ + val = readl(gp->regs + PCS_MIICTRL); + val |= PCS_MIICTRL_RST; + writel(val, gp->regs + PCS_MIICTRL); + + limit = 32; + while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) { + udelay(100); + if (limit-- <= 0) + break; + } + if (limit <= 0) + printk(KERN_WARNING "%s: PCS reset bit would not clear.\n", + gp->dev->name); +} + +static void gem_pcs_reinit_adv(struct gem *gp) +{ + u32 val; + + /* Make sure PCS is disabled while changing advertisement + * configuration. + */ + val = readl(gp->regs + PCS_CFG); + val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO); + writel(val, gp->regs + PCS_CFG); + + /* Advertise all capabilities except assymetric + * pause. + */ + val = readl(gp->regs + PCS_MIIADV); + val |= (PCS_MIIADV_FD | PCS_MIIADV_HD | + PCS_MIIADV_SP | PCS_MIIADV_AP); + writel(val, gp->regs + PCS_MIIADV); + + /* Enable and restart auto-negotiation, disable wrapback/loopback, + * and re-enable PCS. + */ + val = readl(gp->regs + PCS_MIICTRL); + val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE); + val &= ~PCS_MIICTRL_WB; + writel(val, gp->regs + PCS_MIICTRL); + + val = readl(gp->regs + PCS_CFG); + val |= PCS_CFG_ENABLE; + writel(val, gp->regs + PCS_CFG); + + /* Make sure serialink loopback is off. The meaning + * of this bit is logically inverted based upon whether + * you are in Serialink or SERDES mode. + */ + val = readl(gp->regs + PCS_SCTRL); + if (gp->phy_type == phy_serialink) + val &= ~PCS_SCTRL_LOOP; + else + val |= PCS_SCTRL_LOOP; + writel(val, gp->regs + PCS_SCTRL); +} + #define STOP_TRIES 32 /* Must be invoked under gp->lock and gp->tx_lock. */ @@ -1168,6 +1232,9 @@ static void gem_reset(struct gem *gp) if (limit <= 0) printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name); + + if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes) + gem_pcs_reinit_adv(gp); } /* Must be invoked under gp->lock and gp->tx_lock. */ @@ -1324,7 +1391,7 @@ static int gem_set_link_modes(struct gem *gp) gp->phy_type == phy_serdes) { u32 pcs_lpa = readl(gp->regs + PCS_MIILP); - if (pcs_lpa & PCS_MIIADV_FD) + if ((pcs_lpa & PCS_MIIADV_FD) || gp->phy_type == phy_serdes) full_duplex = 1; speed = SPEED_1000; } @@ -1488,6 +1555,9 @@ static void gem_link_timer(unsigned long data) val = readl(gp->regs + PCS_MIISTAT); if ((val & PCS_MIISTAT_LS) != 0) { + if (gp->lstate == link_up) + goto restart; + gp->lstate = link_up; netif_carrier_on(gp->dev); (void)gem_set_link_modes(gp); @@ -1708,61 +1778,8 @@ static void gem_init_phy(struct gem *gp) if (gp->phy_mii.def && gp->phy_mii.def->ops->init) gp->phy_mii.def->ops->init(&gp->phy_mii); } else { - u32 val; - int limit; - - /* Reset PCS unit. */ - val = readl(gp->regs + PCS_MIICTRL); - val |= PCS_MIICTRL_RST; - writeb(val, gp->regs + PCS_MIICTRL); - - limit = 32; - while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) { - udelay(100); - if (limit-- <= 0) - break; - } - if (limit <= 0) - printk(KERN_WARNING "%s: PCS reset bit would not clear.\n", - gp->dev->name); - - /* Make sure PCS is disabled while changing advertisement - * configuration. - */ - val = readl(gp->regs + PCS_CFG); - val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO); - writel(val, gp->regs + PCS_CFG); - - /* Advertise all capabilities except assymetric - * pause. - */ - val = readl(gp->regs + PCS_MIIADV); - val |= (PCS_MIIADV_FD | PCS_MIIADV_HD | - PCS_MIIADV_SP | PCS_MIIADV_AP); - writel(val, gp->regs + PCS_MIIADV); - - /* Enable and restart auto-negotiation, disable wrapback/loopback, - * and re-enable PCS. - */ - val = readl(gp->regs + PCS_MIICTRL); - val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE); - val &= ~PCS_MIICTRL_WB; - writel(val, gp->regs + PCS_MIICTRL); - - val = readl(gp->regs + PCS_CFG); - val |= PCS_CFG_ENABLE; - writel(val, gp->regs + PCS_CFG); - - /* Make sure serialink loopback is off. The meaning - * of this bit is logically inverted based upon whether - * you are in Serialink or SERDES mode. - */ - val = readl(gp->regs + PCS_SCTRL); - if (gp->phy_type == phy_serialink) - val &= ~PCS_SCTRL_LOOP; - else - val |= PCS_SCTRL_LOOP; - writel(val, gp->regs + PCS_SCTRL); + gem_pcs_reset(gp); + gem_pcs_reinit_adv(gp); } /* Default aneg parameters */ @@ -2680,6 +2697,21 @@ static int gem_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->speed = 0; cmd->duplex = cmd->port = cmd->phy_address = cmd->transceiver = cmd->autoneg = 0; + + /* serdes means usually a Fibre connector, with most fixed */ + if (gp->phy_type == phy_serdes) { + cmd->port = PORT_FIBRE; + cmd->supported = (SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | SUPPORTED_Autoneg | + SUPPORTED_Pause | SUPPORTED_Asym_Pause); + cmd->advertising = cmd->supported; + cmd->transceiver = XCVR_INTERNAL; + if (gp->lstate == link_up) + cmd->speed = SPEED_1000; + cmd->duplex = DUPLEX_FULL; + cmd->autoneg = 1; + } } cmd->maxtxpkt = cmd->maxrxpkt = 0; diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index cfd4d052d66..2d14255eb10 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -240,6 +240,10 @@ static u64 ath5k_get_tsf(struct ieee80211_hw *hw); static void ath5k_reset_tsf(struct ieee80211_hw *hw); static int ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb); +static void ath5k_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes); static struct ieee80211_ops ath5k_hw_ops = { .tx = ath5k_tx, @@ -256,6 +260,7 @@ static struct ieee80211_ops ath5k_hw_ops = { .get_tx_stats = ath5k_get_tx_stats, .get_tsf = ath5k_get_tsf, .reset_tsf = ath5k_reset_tsf, + .bss_info_changed = ath5k_bss_info_changed, }; /* @@ -2942,7 +2947,7 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw, sc->opmode != NL80211_IFTYPE_MESH_POINT && test_bit(ATH_STAT_PROMISC, sc->status)) rfilt |= AR5K_RX_FILTER_PROM; - if (sc->opmode == NL80211_IFTYPE_STATION || + if ((sc->opmode == NL80211_IFTYPE_STATION && sc->assoc) || sc->opmode == NL80211_IFTYPE_ADHOC) { rfilt |= AR5K_RX_FILTER_BEACON; } @@ -3083,4 +3088,32 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) end: return ret; } +static void +set_beacon_filter(struct ieee80211_hw *hw, bool enable) +{ + struct ath5k_softc *sc = hw->priv; + struct ath5k_hw *ah = sc->ah; + u32 rfilt; + rfilt = ath5k_hw_get_rx_filter(ah); + if (enable) + rfilt |= AR5K_RX_FILTER_BEACON; + else + rfilt &= ~AR5K_RX_FILTER_BEACON; + ath5k_hw_set_rx_filter(ah, rfilt); + sc->filter_flags = rfilt; +} +static void ath5k_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changes) +{ + struct ath5k_softc *sc = hw->priv; + if (changes & BSS_CHANGED_ASSOC) { + mutex_lock(&sc->lock); + sc->assoc = bss_conf->assoc; + if (sc->opmode == NL80211_IFTYPE_STATION) + set_beacon_filter(hw, sc->assoc); + mutex_unlock(&sc->lock); + } +} diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h index 06d1054ca94..facc60ddada 100644 --- a/drivers/net/wireless/ath5k/base.h +++ b/drivers/net/wireless/ath5k/base.h @@ -179,6 +179,7 @@ struct ath5k_softc { struct timer_list calib_tim; /* calibration timer */ int power_level; /* Requested tx power in dbm */ + bool assoc; /* assocate state */ }; #define ath5k_hw_hasbssidmask(_ah) \ diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 19980cbd5d5..ccaeb5c219d 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -417,19 +417,19 @@ ath5k_debug_init_device(struct ath5k_softc *sc) sc->debug.debugfs_phydir = debugfs_create_dir(wiphy_name(sc->hw->wiphy), ath5k_global_debugfs); - sc->debug.debugfs_debug = debugfs_create_file("debug", 0666, + sc->debug.debugfs_debug = debugfs_create_file("debug", S_IWUSR | S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_debug); - sc->debug.debugfs_registers = debugfs_create_file("registers", 0444, + sc->debug.debugfs_registers = debugfs_create_file("registers", S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_registers); - sc->debug.debugfs_tsf = debugfs_create_file("tsf", 0666, + sc->debug.debugfs_tsf = debugfs_create_file("tsf", S_IWUSR | S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_tsf); - sc->debug.debugfs_beacon = debugfs_create_file("beacon", 0666, + sc->debug.debugfs_beacon = debugfs_create_file("beacon", S_IWUSR | S_IRUGO, sc->debug.debugfs_phydir, sc, &fops_beacon); - sc->debug.debugfs_reset = debugfs_create_file("reset", 0222, + sc->debug.debugfs_reset = debugfs_create_file("reset", S_IWUSR, sc->debug.debugfs_phydir, sc, &fops_reset); } diff --git a/drivers/net/wireless/ath9k/beacon.c b/drivers/net/wireless/ath9k/beacon.c index 9e15c30bbc0..4dd1c1bda0f 100644 --- a/drivers/net/wireless/ath9k/beacon.c +++ b/drivers/net/wireless/ath9k/beacon.c @@ -170,7 +170,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) skb = (struct sk_buff *)bf->bf_mpdu; if (skb) { pci_unmap_single(sc->pdev, bf->bf_dmacontext, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); } @@ -193,7 +193,7 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id) bf->bf_buf_addr = bf->bf_dmacontext = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data); @@ -352,7 +352,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) if (bf->bf_mpdu != NULL) { skb = (struct sk_buff *)bf->bf_mpdu; pci_unmap_single(sc->pdev, bf->bf_dmacontext, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; @@ -412,7 +412,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id) bf->bf_buf_addr = bf->bf_dmacontext = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); bf->bf_mpdu = skb; @@ -439,7 +439,7 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp) if (bf->bf_mpdu != NULL) { struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu; pci_unmap_single(sc->pdev, bf->bf_dmacontext, - skb_end_pointer(skb) - skb->head, + skb->len, PCI_DMA_TODEVICE); dev_kfree_skb_any(skb); bf->bf_mpdu = NULL; diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 4983402af55..504a0444d89 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -49,10 +49,12 @@ static void ath_rx_buf_link(struct ath_softc *sc, struct ath_buf *bf) ASSERT(skb != NULL); ds->ds_vdata = skb->data; - /* setup rx descriptors */ + /* setup rx descriptors. The sc_rxbufsize here tells the harware + * how much data it can DMA to us and that we are prepared + * to process */ ath9k_hw_setuprxdesc(ah, ds, - skb_tailroom(skb), /* buffer size */ + sc->sc_rxbufsize, 0); if (sc->sc_rxlink == NULL) @@ -398,6 +400,13 @@ static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc, * in rx'd frames. */ + /* Note: the kernel can allocate a value greater than + * what we ask it to give us. We really only need 4 KB as that + * is this hardware supports and in fact we need at least 3849 + * as that is the MAX AMSDU size this hardware supports. + * Unfortunately this means we may get 8 KB here from the + * kernel... and that is actually what is observed on some + * systems :( */ skb = dev_alloc_skb(len + sc->sc_cachelsz - 1); if (skb != NULL) { off = ((unsigned long) skb->data) % sc->sc_cachelsz; @@ -456,7 +465,7 @@ static int ath_rx_indicate(struct ath_softc *sc, if (nskb != NULL) { bf->bf_mpdu = nskb; bf->bf_buf_addr = pci_map_single(sc->pdev, nskb->data, - skb_end_pointer(nskb) - nskb->head, + sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); bf->bf_dmacontext = bf->bf_buf_addr; ATH_RX_CONTEXT(nskb)->ctx_rxbuf = bf; @@ -542,7 +551,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) bf->bf_mpdu = skb; bf->bf_buf_addr = pci_map_single(sc->pdev, skb->data, - skb_end_pointer(skb) - skb->head, + sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); bf->bf_dmacontext = bf->bf_buf_addr; ATH_RX_CONTEXT(skb)->ctx_rxbuf = bf; @@ -1007,7 +1016,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) pci_dma_sync_single_for_cpu(sc->pdev, bf->bf_buf_addr, - skb_tailroom(skb), + sc->sc_rxbufsize, PCI_DMA_FROMDEVICE); pci_unmap_single(sc->pdev, bf->bf_buf_addr, diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index dcce3542d5a..7a9f901d4ff 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -3897,6 +3897,7 @@ static int ipw_disassociate(void *data) if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING))) return 0; ipw_send_disassociate(data, 0); + netif_carrier_off(priv->net_dev); return 1; } @@ -10190,6 +10191,9 @@ static int ipw_tx_skb(struct ipw_priv *priv, struct ieee80211_txb *txb, u16 remaining_bytes; int fc; + if (!(priv->status & STATUS_ASSOCIATED)) + goto drop; + hdr_len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl)); switch (priv->ieee->iw_mode) { case IW_MODE_ADHOC: diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 444c5cc05f0..c4c0371c763 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1384,9 +1384,11 @@ void iwl_rx_handle(struct iwl_priv *priv) rxq->queue[i] = NULL; - pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->aligned_dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); + dma_sync_single_range_for_cpu( + &priv->pci_dev->dev, rxb->real_dma_addr, + rxb->aligned_dma_addr - rxb->real_dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); pkt = (struct iwl_rx_packet *)rxb->skb->data; /* Reclaim a command buffer only if this packet is a response diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 4c312c55f90..01a84585133 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -290,6 +290,9 @@ void iwl_clear_stations_table(struct iwl_priv *priv) priv->num_stations = 0; memset(priv->stations, 0, sizeof(priv->stations)); + /* clean ucode key table bit map */ + priv->ucode_key_table = 0; + spin_unlock_irqrestore(&priv->sta_lock, flags); } EXPORT_SYMBOL(iwl_clear_stations_table); diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 61797f3f8d5..26f7084d301 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -475,7 +475,7 @@ static int iwl_get_free_ucode_key_index(struct iwl_priv *priv) if (!test_and_set_bit(i, &priv->ucode_key_table)) return i; - return -1; + return WEP_INVALID_OFFSET; } int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty) @@ -620,6 +620,9 @@ static int iwl_set_wep_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for new kew"); + priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; @@ -637,6 +640,7 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv, { unsigned long flags; __le16 key_flags = 0; + int ret; key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK); key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); @@ -664,14 +668,18 @@ static int iwl_set_ccmp_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for new kew"); + priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK; priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK; + ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + spin_unlock_irqrestore(&priv->sta_lock, flags); - IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n"); - return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC); + return ret; } static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, @@ -696,6 +704,9 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, /* else, we are overriding an existing key => no need to allocated room * in uCode. */ + WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, + "no space for new kew"); + /* This copy is acutally not needed: we get the key with each TX */ memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16); @@ -734,6 +745,13 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv, return 0; } + if (priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET) { + IWL_WARNING("Removing wrong key %d 0x%x\n", + keyconf->keyidx, key_flags); + spin_unlock_irqrestore(&priv->sta_lock, flags); + return 0; + } + if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset, &priv->ucode_key_table)) IWL_ERROR("index %d not used in uCode key table.\n", diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index fe1867b25ff..cac732f4047 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -615,7 +615,7 @@ static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, struct ieee80211_hdr *tx_hdr; tx_hdr = (struct ieee80211_hdr *)skb->data; - if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1))) + if (likely(!memcmp(tx_hdr->addr2, rx_hdr->addr1, ETH_ALEN))) { __skb_unlink(skb, q); tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1); diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index c6948d8f53f..6d017adc914 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1785,7 +1785,7 @@ static int __devexit xennet_remove(struct xenbus_device *dev) return 0; } -static struct xenbus_driver netfront = { +static struct xenbus_driver netfront_driver = { .name = "vif", .owner = THIS_MODULE, .ids = netfront_ids, @@ -1805,7 +1805,7 @@ static int __init netif_init(void) printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n"); - return xenbus_register_frontend(&netfront); + return xenbus_register_frontend(&netfront_driver); } module_init(netif_init); @@ -1815,7 +1815,7 @@ static void __exit netif_exit(void) if (xen_initial_domain()) return; - xenbus_unregister_driver(&netfront); + xenbus_unregister_driver(&netfront_driver); } module_exit(netif_exit); diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index e2e95b36a60..101ed49a2d1 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -70,6 +70,8 @@ static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc * parallel ports and <S> is the number of serial ports. */ card->numports = (dev->subsystem_device & 0xf0) >> 4; + if (card->numports > ARRAY_SIZE(card->addr)) + card->numports = ARRAY_SIZE(card->addr); return 0; } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 28af496b441..061d1ee0046 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2042,7 +2042,7 @@ static int __devinit pci_init(void) return 0; } -static int __devinit pci_setup(char *str) +static int __init pci_setup(char *str) { while (str) { char *k = strchr(str, ','); diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 8f63f4c6b85..9aad608bcf3 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -16,6 +16,7 @@ #include <linux/pm.h> #include <linux/init.h> #include <linux/slab.h> +#include <linux/jiffies.h> #include <linux/pci-aspm.h> #include "../pci.h" @@ -161,11 +162,12 @@ static void pcie_check_clock_pm(struct pci_dev *pdev) */ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) { - int pos, child_pos; + int pos, child_pos, i = 0; u16 reg16 = 0; struct pci_dev *child_dev; int same_clock = 1; - + unsigned long start_jiffies; + u16 child_regs[8], parent_reg; /* * all functions of a slot should have the same Slot Clock * Configuration, so just check one function @@ -191,16 +193,19 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, ®16); + child_regs[i] = reg16; if (same_clock) reg16 |= PCI_EXP_LNKCTL_CCC; else reg16 &= ~PCI_EXP_LNKCTL_CCC; pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL, reg16); + i++; } /* Configure upstream component */ pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16); + parent_reg = reg16; if (same_clock) reg16 |= PCI_EXP_LNKCTL_CCC; else @@ -212,12 +217,30 @@ static void pcie_aspm_configure_common_clock(struct pci_dev *pdev) pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16); /* Wait for link training end */ - while (1) { + /* break out after waiting for 1 second */ + start_jiffies = jiffies; + while ((jiffies - start_jiffies) < HZ) { pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16); if (!(reg16 & PCI_EXP_LNKSTA_LT)) break; cpu_relax(); } + /* training failed -> recover */ + if ((jiffies - start_jiffies) >= HZ) { + dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure" + " common clock\n"); + i = 0; + list_for_each_entry(child_dev, &pdev->subordinate->devices, + bus_list) { + child_pos = pci_find_capability(child_dev, + PCI_CAP_ID_EXP); + pci_write_config_word(child_dev, + child_pos + PCI_EXP_LNKCTL, + child_regs[i]); + i++; + } + pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, parent_reg); + } } /* diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 5049a47030a..5f4f85f56cb 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -22,6 +22,7 @@ #include <linux/delay.h> #include <linux/acpi.h> #include <linux/kallsyms.h> +#include <linux/dmi.h> #include "pci.h" int isa_dma_bridge_buggy; @@ -1828,6 +1829,22 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, ht_enable_msi_mapping); +/* The P5N32-SLI Premium motherboard from Asus has a problem with msi + * for the MCP55 NIC. It is not yet determined whether the msi problem + * also affects other devices. As for now, turn off msi for this device. + */ +static void __devinit nvenet_msi_disable(struct pci_dev *dev) +{ + if (dmi_name_in_vendors("P5N32-SLI PREMIUM")) { + dev_info(&dev->dev, + "Disabling msi for MCP55 NIC on P5N32-SLI Premium\n"); + dev->no_msi = 1; + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, + PCI_DEVICE_ID_NVIDIA_NVENET_15, + nvenet_msi_disable); + static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) { struct pci_dev *host_bridge; diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index 4dd1c3e157a..5a8ccb4f604 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -253,6 +253,7 @@ placeholder: __func__, pci_domain_nr(parent), parent->number, slot_nr); out: + kfree(slot_name); up_write(&pci_bus_sem); return slot; err: diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index 222904411a1..27647354398 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -217,7 +217,7 @@ config PCMCIA_PXA2XX depends on ARM && ARCH_PXA && PCMCIA depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \ || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \ - || ARCH_VIPER) + || ARCH_VIPER || ARCH_PXA_ESERIES) help Say Y here to include support for the PXA2xx PCMCIA controller diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 238629ad7f7..bbac4632722 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -72,5 +72,6 @@ pxa2xx-obj-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o +pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_core.o $(pxa2xx-obj-y) diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c index bb7338863fb..b59d4115d20 100644 --- a/drivers/pcmcia/bfin_cf_pcmcia.c +++ b/drivers/pcmcia/bfin_cf_pcmcia.c @@ -334,6 +334,6 @@ static void __exit bfin_cf_exit(void) module_init(bfin_cf_init); module_exit(bfin_cf_exit); -MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>") +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/pcmcia/pxa2xx_e740.c b/drivers/pcmcia/pxa2xx_e740.c new file mode 100644 index 00000000000..f663a011bf4 --- /dev/null +++ b/drivers/pcmcia/pxa2xx_e740.c @@ -0,0 +1,176 @@ +/* + * Toshiba e740 PCMCIA specific routines. + * + * (c) 2004 Ian Molton <spyro@f2s.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <mach/hardware.h> +#include <mach/pxa-regs.h> +#include <mach/eseries-gpio.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include "soc_common.h" + +static struct pcmcia_irqs cd_irqs[] = { + { + .sock = 0, + .irq = IRQ_GPIO(GPIO_E740_PCMCIA_CD0), + .str = "CF card detect" + }, + { + .sock = 1, + .irq = IRQ_GPIO(GPIO_E740_PCMCIA_CD1), + .str = "Wifi switch" + }, +}; + +static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + skt->irq = skt->nr == 0 ? IRQ_GPIO(GPIO_E740_PCMCIA_RDY0) : + IRQ_GPIO(GPIO_E740_PCMCIA_RDY1); + + return soc_pcmcia_request_irqs(skt, &cd_irqs[skt->nr], 1); +} + +/* + * Release all resources. + */ +static void e740_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + soc_pcmcia_free_irqs(skt, &cd_irqs[skt->nr], 1); +} + +static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + if (skt->nr == 0) { + state->detect = gpio_get_value(GPIO_E740_PCMCIA_CD0) ? 0 : 1; + state->ready = gpio_get_value(GPIO_E740_PCMCIA_RDY0) ? 1 : 0; + } else { + state->detect = gpio_get_value(GPIO_E740_PCMCIA_CD1) ? 0 : 1; + state->ready = gpio_get_value(GPIO_E740_PCMCIA_RDY1) ? 1 : 0; + } + + state->vs_3v = 1; + state->bvd1 = 1; + state->bvd2 = 1; + state->wrprot = 0; + state->vs_Xv = 0; +} + +static int e740_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + if (state->flags & SS_RESET) { + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_RST0, 1); + else + gpio_set_value(GPIO_E740_PCMCIA_RST1, 1); + } else { + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_RST0, 0); + else + gpio_set_value(GPIO_E740_PCMCIA_RST1, 0); + } + + switch (state->Vcc) { + case 0: /* Socket off */ + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_PWR0, 0); + else + gpio_set_value(GPIO_E740_PCMCIA_PWR1, 1); + break; + case 50: + case 33: /* socket on */ + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_PWR0, 1); + else + gpio_set_value(GPIO_E740_PCMCIA_PWR1, 0); + break; + default: + printk(KERN_ERR "e740_cs: Unsupported Vcc: %d\n", state->Vcc); + } + + return 0; +} + +/* + * Enable card status IRQs on (re-)initialisation. This can + * be called at initialisation, power management event, or + * pcmcia event. + */ +static void e740_pcmcia_socket_init(struct soc_pcmcia_socket *skt) +{ + soc_pcmcia_enable_irqs(skt, cd_irqs, ARRAY_SIZE(cd_irqs)); +} + +/* + * Disable card status IRQs on suspend. + */ +static void e740_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) +{ + soc_pcmcia_disable_irqs(skt, cd_irqs, ARRAY_SIZE(cd_irqs)); +} + +static struct pcmcia_low_level e740_pcmcia_ops = { + .owner = THIS_MODULE, + .hw_init = e740_pcmcia_hw_init, + .hw_shutdown = e740_pcmcia_hw_shutdown, + .socket_state = e740_pcmcia_socket_state, + .configure_socket = e740_pcmcia_configure_socket, + .socket_init = e740_pcmcia_socket_init, + .socket_suspend = e740_pcmcia_socket_suspend, + .nr = 2, +}; + +static struct platform_device *e740_pcmcia_device; + +static int __init e740_pcmcia_init(void) +{ + int ret; + + if (!machine_is_e740()) + return -ENODEV; + + e740_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!e740_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(e740_pcmcia_device, &e740_pcmcia_ops, + sizeof(e740_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(e740_pcmcia_device); + + if (ret) + platform_device_put(e740_pcmcia_device); + + return ret; +} + +static void __exit e740_pcmcia_exit(void) +{ + platform_device_unregister(e740_pcmcia_device); +} + +module_init(e740_pcmcia_init); +module_exit(e740_pcmcia_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Ian Molton <spyro@f2s.com>"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_DESCRIPTION("e740 PCMCIA platform support"); diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c index a926c896475..643a6b98462 100644 --- a/drivers/rapidio/rio-scan.c +++ b/drivers/rapidio/rio-scan.c @@ -879,7 +879,7 @@ static void rio_update_route_tables(struct rio_mport *port) * link, then start recursive peer enumeration. Returns %0 if * enumeration succeeds or %-EBUSY if enumeration fails. */ -int rio_enum_mport(struct rio_mport *mport) +int __devinit rio_enum_mport(struct rio_mport *mport) { struct rio_net *net = NULL; int rc = 0; @@ -972,7 +972,7 @@ static void rio_enum_timeout(unsigned long data) * peer discovery. Returns %0 if discovery succeeds or %-EBUSY * on failure. */ -int rio_disc_mport(struct rio_mport *mport) +int __devinit rio_disc_mport(struct rio_mport *mport) { struct rio_net *net = NULL; int enum_timeout_flag = 0; diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c index 680661abbc4..6395c780008 100644 --- a/drivers/rapidio/rio.c +++ b/drivers/rapidio/rio.c @@ -467,7 +467,7 @@ static int __devinit rio_init(void) device_initcall(rio_init); -int rio_init_mports(void) +int __devinit rio_init_mports(void) { int rc = 0; struct rio_mport *port; diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c index 2133f37906f..d5e4e637dde 100644 --- a/drivers/rtc/rtc-at91sam9.c +++ b/drivers/rtc/rtc-at91sam9.c @@ -21,6 +21,7 @@ #include <mach/board.h> #include <mach/at91_rtt.h> +#include <mach/cpu.h> /* diff --git a/drivers/rtc/rtc-ds1672.c b/drivers/rtc/rtc-ds1672.c index 341d7a5b45a..4e91419e891 100644 --- a/drivers/rtc/rtc-ds1672.c +++ b/drivers/rtc/rtc-ds1672.c @@ -209,12 +209,18 @@ static int ds1672_probe(struct i2c_client *client, return err; } +static struct i2c_device_id ds1672_id[] = { + { "ds1672", 0 }, + { } +}; + static struct i2c_driver ds1672_driver = { .driver = { .name = "rtc-ds1672", }, .probe = &ds1672_probe, .remove = &ds1672_remove, + .id_table = ds1672_id, }; static int __init ds1672_init(void) diff --git a/drivers/rtc/rtc-max6900.c b/drivers/rtc/rtc-max6900.c index 80782798763..a4f6665ab3c 100644 --- a/drivers/rtc/rtc-max6900.c +++ b/drivers/rtc/rtc-max6900.c @@ -247,12 +247,18 @@ max6900_probe(struct i2c_client *client, const struct i2c_device_id *id) return 0; } +static struct i2c_device_id max6900_id[] = { + { "max6900", 0 }, + { } +}; + static struct i2c_driver max6900_driver = { .driver = { .name = "rtc-max6900", }, .probe = max6900_probe, .remove = max6900_remove, + .id_table = max6900_id, }; static int __init max6900_init(void) diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index f59277bbeda..7a568beba3f 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -26,7 +26,7 @@ #include <asm/uaccess.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/plat-s3c/regs-rtc.h> +#include <plat/regs-rtc.h> /* I have yet to find an S3C implementation with more than one * of these rtc blocks in */ diff --git a/drivers/rtc/rtc-starfire.c b/drivers/rtc/rtc-starfire.c index 7ccb0dd700a..5be98bfd7ed 100644 --- a/drivers/rtc/rtc-starfire.c +++ b/drivers/rtc/rtc-starfire.c @@ -6,7 +6,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> -#include <linux/time.h> #include <linux/rtc.h> #include <linux/platform_device.h> @@ -16,11 +15,6 @@ MODULE_AUTHOR("David S. Miller <davem@davemloft.net>"); MODULE_DESCRIPTION("Starfire RTC driver"); MODULE_LICENSE("GPL"); -struct starfire_rtc { - struct rtc_device *rtc; - spinlock_t lock; -}; - static u32 starfire_get_time(void) { static char obp_gettod[32]; @@ -35,64 +29,31 @@ static u32 starfire_get_time(void) static int starfire_read_time(struct device *dev, struct rtc_time *tm) { - struct starfire_rtc *p = dev_get_drvdata(dev); - unsigned long flags, secs; - - spin_lock_irqsave(&p->lock, flags); - secs = starfire_get_time(); - spin_unlock_irqrestore(&p->lock, flags); - - rtc_time_to_tm(secs, tm); - - return 0; -} - -static int starfire_set_time(struct device *dev, struct rtc_time *tm) -{ - unsigned long secs; - int err; - - err = rtc_tm_to_time(tm, &secs); - if (err) - return err; - - /* Do nothing, time is set using the service processor - * console on this platform. - */ - return 0; + rtc_time_to_tm(starfire_get_time(), tm); + return rtc_valid_tm(tm); } static const struct rtc_class_ops starfire_rtc_ops = { .read_time = starfire_read_time, - .set_time = starfire_set_time, }; -static int __devinit starfire_rtc_probe(struct platform_device *pdev) +static int __init starfire_rtc_probe(struct platform_device *pdev) { - struct starfire_rtc *p = kzalloc(sizeof(*p), GFP_KERNEL); - - if (!p) - return -ENOMEM; + struct rtc_device *rtc = rtc_device_register("starfire", &pdev->dev, + &starfire_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) + return PTR_ERR(rtc); - spin_lock_init(&p->lock); + platform_set_drvdata(pdev, rtc); - p->rtc = rtc_device_register("starfire", &pdev->dev, - &starfire_rtc_ops, THIS_MODULE); - if (IS_ERR(p->rtc)) { - int err = PTR_ERR(p->rtc); - kfree(p); - return err; - } - platform_set_drvdata(pdev, p); return 0; } -static int __devexit starfire_rtc_remove(struct platform_device *pdev) +static int __exit starfire_rtc_remove(struct platform_device *pdev) { - struct starfire_rtc *p = platform_get_drvdata(pdev); + struct rtc_device *rtc = platform_get_drvdata(pdev); - rtc_device_unregister(p->rtc); - kfree(p); + rtc_device_unregister(rtc); return 0; } @@ -102,13 +63,12 @@ static struct platform_driver starfire_rtc_driver = { .name = "rtc-starfire", .owner = THIS_MODULE, }, - .probe = starfire_rtc_probe, - .remove = __devexit_p(starfire_rtc_remove), + .remove = __exit_p(starfire_rtc_remove), }; static int __init starfire_rtc_init(void) { - return platform_driver_register(&starfire_rtc_driver); + return platform_driver_probe(&starfire_rtc_driver, starfire_rtc_probe); } static void __exit starfire_rtc_exit(void) diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c index abe87a4d266..01d8da9afdc 100644 --- a/drivers/rtc/rtc-twl4030.c +++ b/drivers/rtc/rtc-twl4030.c @@ -337,7 +337,7 @@ static int twl4030_rtc_ioctl(struct device *dev, unsigned int cmd, } #else -#define omap_rtc_ioctl NULL +#define twl4030_rtc_ioctl NULL #endif static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 35364f64da7..c557ba34e1a 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -720,7 +720,6 @@ static int zfcp_erp_adapter_strategy_generic(struct zfcp_erp_action *act, goto failed_openfcp; atomic_set_mask(ZFCP_STATUS_COMMON_OPEN, &act->adapter->status); - schedule_work(&act->adapter->scan_work); return ZFCP_ERP_SUCCEEDED; @@ -1186,7 +1185,9 @@ static void zfcp_erp_scsi_scan(struct work_struct *work) container_of(work, struct zfcp_erp_add_work, work); struct zfcp_unit *unit = p->unit; struct fc_rport *rport = unit->port->rport; - scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, + + if (rport && rport->port_state == FC_PORTSTATE_ONLINE) + scsi_scan_target(&rport->dev, 0, rport->scsi_target_id, scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0); atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status); zfcp_unit_put(unit); @@ -1282,6 +1283,8 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result) case ZFCP_ERP_ACTION_REOPEN_ADAPTER: if (result != ZFCP_ERP_SUCCEEDED) zfcp_erp_rports_del(adapter); + else + schedule_work(&adapter->scan_work); zfcp_adapter_put(adapter); break; } diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 1a7c80a77ff..8aab3091a7b 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -50,7 +50,8 @@ static int zfcp_wka_port_get(struct zfcp_wka_port *wka_port) if (mutex_lock_interruptible(&wka_port->mutex)) return -ERESTARTSYS; - if (wka_port->status != ZFCP_WKA_PORT_ONLINE) { + if (wka_port->status == ZFCP_WKA_PORT_OFFLINE || + wka_port->status == ZFCP_WKA_PORT_CLOSING) { wka_port->status = ZFCP_WKA_PORT_OPENING; if (zfcp_fsf_open_wka_port(wka_port)) wka_port->status = ZFCP_WKA_PORT_OFFLINE; @@ -125,8 +126,7 @@ static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range, read_lock_irqsave(&zfcp_data.config_lock, flags); list_for_each_entry(port, &fsf_req->adapter->port_list_head, list) { - /* FIXME: ZFCP_STATUS_PORT_DID_DID check is racy */ - if (!(atomic_read(&port->status) & ZFCP_STATUS_PORT_DID_DID)) + if (!(atomic_read(&port->status) & ZFCP_STATUS_PORT_PHYS_OPEN)) /* Try to connect to unused ports anyway. */ zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, @@ -610,7 +610,6 @@ int zfcp_scan_ports(struct zfcp_adapter *adapter) int ret, i; struct zfcp_gpn_ft *gpn_ft; - zfcp_erp_wait(adapter); /* wait until adapter is finished with ERP */ if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT) return 0; diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index d024442ee12..dc036769040 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -930,8 +930,10 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_command(unsigned long old_req_id, goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND, req_flags, adapter->pool.fsf_req_abort); - if (IS_ERR(req)) + if (IS_ERR(req)) { + req = NULL; goto out; + } if (unlikely(!(atomic_read(&unit->status) & ZFCP_STATUS_COMMON_UNBLOCKED))) @@ -1584,6 +1586,7 @@ static void zfcp_fsf_open_wka_port_handler(struct zfcp_fsf_req *req) wka_port->status = ZFCP_WKA_PORT_OFFLINE; break; case FSF_PORT_ALREADY_OPEN: + break; case FSF_GOOD: wka_port->handle = header->port_handle; wka_port->status = ZFCP_WKA_PORT_ONLINE; @@ -2113,18 +2116,21 @@ static inline void zfcp_fsf_trace_latency(struct zfcp_fsf_req *fsf_req) static void zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *req) { - struct scsi_cmnd *scpnt = req->data; + struct scsi_cmnd *scpnt; struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *) &(req->qtcb->bottom.io.fcp_rsp); u32 sns_len; char *fcp_rsp_info = (unsigned char *) &fcp_rsp_iu[1]; unsigned long flags; - if (unlikely(!scpnt)) - return; - read_lock_irqsave(&req->adapter->abort_lock, flags); + scpnt = req->data; + if (unlikely(!scpnt)) { + read_unlock_irqrestore(&req->adapter->abort_lock, flags); + return; + } + if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ABORTED)) { set_host_byte(scpnt, DID_SOFT_ERROR); set_driver_byte(scpnt, SUGGEST_RETRY); @@ -2442,8 +2448,10 @@ struct zfcp_fsf_req *zfcp_fsf_send_fcp_ctm(struct zfcp_adapter *adapter, goto out; req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags, adapter->pool.fsf_req_scsi); - if (IS_ERR(req)) + if (IS_ERR(req)) { + req = NULL; goto out; + } req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT; req->data = unit; diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index e46fd3e9f68..468c880f8b6 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -88,7 +88,7 @@ static int zfcp_scsi_queuecommand(struct scsi_cmnd *scpnt, ret = zfcp_fsf_send_fcp_command_task(adapter, unit, scpnt, 0, ZFCP_REQ_AUTO_CLEANUP); if (unlikely(ret == -EBUSY)) - zfcp_scsi_command_fail(scpnt, DID_NO_CONNECT); + return SCSI_MLQUEUE_DEVICE_BUSY; else if (unlikely(ret < 0)) return SCSI_MLQUEUE_HOST_BUSY; diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 9aa301c1ed0..162cd927d94 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -427,8 +427,8 @@ static int aac_slave_configure(struct scsi_device *sdev) * Firmware has an individual device recovery time typically * of 35 seconds, give us a margin. */ - if (sdev->timeout < (45 * HZ)) - sdev->timeout = 45 * HZ; + if (sdev->request_queue->rq_timeout < (45 * HZ)) + blk_queue_rq_timeout(sdev->request_queue, 45*HZ); for (cid = 0; cid < aac->maximum_num_containers; ++cid) if (aac->fsa_dev[cid].valid) ++num_lsu; diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c index 218777bfc14..399fe559e4d 100644 --- a/drivers/scsi/advansys.c +++ b/drivers/scsi/advansys.c @@ -13872,8 +13872,10 @@ static int __devinit advansys_board_found(struct Scsi_Host *shost, advansys_wide_free_mem(boardp); free_irq(boardp->irq, shost); err_free_dma: +#ifdef CONFIG_ISA if (shost->dma_channel != NO_ISA_DMA) free_dma(shost->dma_channel); +#endif err_free_proc: kfree(boardp->prtbuf); err_unmap: @@ -13894,10 +13896,12 @@ static int advansys_release(struct Scsi_Host *shost) ASC_DBG(1, "begin\n"); scsi_remove_host(shost); free_irq(board->irq, shost); +#ifdef CONFIG_ISA if (shost->dma_channel != NO_ISA_DMA) { ASC_DBG(1, "free_dma()\n"); free_dma(shost->dma_channel); } +#endif if (ASC_NARROW_BOARD(board)) { dma_unmap_single(board->dev, board->dvc_var.asc_dvc_var.overrun_dma, diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c index 9aec4ca64e5..f7da7530875 100644 --- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c +++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c @@ -107,6 +107,7 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h) struct request *req; int ret; +retry: req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO); if (!req) return SCSI_DH_RES_TEMP_UNAVAIL; @@ -121,7 +122,6 @@ static int hp_sw_tur(struct scsi_device *sdev, struct hp_sw_dh_data *h) memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE); req->sense_len = 0; -retry: ret = blk_execute_rq(req->q, NULL, req, 1); if (ret == -EIO) { if (req->sense_len > 0) { @@ -136,8 +136,10 @@ retry: h->path_state = HP_SW_PATH_ACTIVE; ret = SCSI_DH_OK; } - if (ret == SCSI_DH_IMM_RETRY) + if (ret == SCSI_DH_IMM_RETRY) { + blk_put_request(req); goto retry; + } if (ret == SCSI_DH_DEV_OFFLINED) { h->path_state = HP_SW_PATH_PASSIVE; ret = SCSI_DH_OK; @@ -200,6 +202,7 @@ static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h) struct request *req; int ret, retry; +retry: req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO); if (!req) return SCSI_DH_RES_TEMP_UNAVAIL; @@ -216,7 +219,6 @@ static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h) req->sense_len = 0; retry = h->retries; -retry: ret = blk_execute_rq(req->q, NULL, req, 1); if (ret == -EIO) { if (req->sense_len > 0) { @@ -231,8 +233,10 @@ retry: ret = SCSI_DH_OK; if (ret == SCSI_DH_RETRY) { - if (--retry) + if (--retry) { + blk_put_request(req); goto retry; + } ret = SCSI_DH_IO; } diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index c387c15a212..fb247fdfa2b 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -588,7 +588,7 @@ static struct pci_driver gdth_pci_driver = { .remove = gdth_pci_remove_one, }; -static void gdth_pci_remove_one(struct pci_dev *pdev) +static void __devexit gdth_pci_remove_one(struct pci_dev *pdev) { gdth_ha_str *ha = pci_get_drvdata(pdev); @@ -600,7 +600,7 @@ static void gdth_pci_remove_one(struct pci_dev *pdev) pci_disable_device(pdev); } -static int gdth_pci_init_one(struct pci_dev *pdev, +static int __devinit gdth_pci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { ushort vendor = pdev->vendor; @@ -853,7 +853,7 @@ static int __init gdth_init_isa(ulong32 bios_adr,gdth_ha_str *ha) #endif /* CONFIG_ISA */ #ifdef CONFIG_PCI -static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr, +static int __devinit gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr, gdth_ha_str *ha) { register gdt6_dpram_str __iomem *dp6_ptr; @@ -1237,7 +1237,7 @@ static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr, /* controller protocol functions */ -static void __init gdth_enable_int(gdth_ha_str *ha) +static void __devinit gdth_enable_int(gdth_ha_str *ha) { ulong flags; gdt2_dpram_str __iomem *dp2_ptr; @@ -1553,7 +1553,7 @@ static int gdth_internal_cmd(gdth_ha_str *ha, unchar service, ushort opcode, /* search for devices */ -static int __init gdth_search_drives(gdth_ha_str *ha) +static int __devinit gdth_search_drives(gdth_ha_str *ha) { ushort cdev_cnt, i; int ok; @@ -4935,7 +4935,7 @@ static int __init gdth_eisa_probe_one(ushort eisa_slot) #endif /* CONFIG_EISA */ #ifdef CONFIG_PCI -static int gdth_pci_probe_one(gdth_pci_str *pcistr, +static int __devinit gdth_pci_probe_one(gdth_pci_str *pcistr, gdth_ha_str **ha_out) { struct Scsi_Host *shp; diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 87e09f35d3d..6cad1758243 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -1442,7 +1442,7 @@ static int ibmvscsi_slave_configure(struct scsi_device *sdev) spin_lock_irqsave(shost->host_lock, lock_flags); if (sdev->type == TYPE_DISK) { sdev->allow_restart = 1; - sdev->timeout = 60 * HZ; + blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); } scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun); spin_unlock_irqrestore(shost->host_lock, lock_flags); diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index a454f94623d..17ce7abe17e 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -1016,7 +1016,8 @@ static int megasas_slave_configure(struct scsi_device *sdev) * The RAID firmware may require extended timeouts. */ if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS) - sdev->timeout = MEGASAS_DEFAULT_CMD_TIMEOUT * HZ; + blk_queue_rq_timeout(sdev->request_queue, + MEGASAS_DEFAULT_CMD_TIMEOUT * HZ); return 0; } diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 386361778eb..edfaf241c5b 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -932,8 +932,7 @@ static int scsi_eh_try_stu(struct scsi_cmnd *scmd) int i, rtn = NEEDS_RETRY; for (i = 0; rtn == NEEDS_RETRY && i < 2; i++) - rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, - scmd->device->timeout, 0); + rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, scmd->device->request_queue->rq_timeout, 0); if (rtn == SUCCESS) return 0; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index f5d3b96890d..fa45a1a6686 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -567,15 +567,18 @@ static inline int scsi_host_is_busy(struct Scsi_Host *shost) */ static void scsi_run_queue(struct request_queue *q) { - struct scsi_device *starved_head = NULL, *sdev = q->queuedata; + struct scsi_device *sdev = q->queuedata; struct Scsi_Host *shost = sdev->host; + LIST_HEAD(starved_list); unsigned long flags; if (scsi_target(sdev)->single_lun) scsi_single_lun_run(sdev); spin_lock_irqsave(shost->host_lock, flags); - while (!list_empty(&shost->starved_list) && !scsi_host_is_busy(shost)) { + list_splice_init(&shost->starved_list, &starved_list); + + while (!list_empty(&starved_list)) { int flagset; /* @@ -588,24 +591,18 @@ static void scsi_run_queue(struct request_queue *q) * scsi_request_fn must get the host_lock before checking * or modifying starved_list or starved_entry. */ - sdev = list_entry(shost->starved_list.next, - struct scsi_device, starved_entry); - /* - * The *queue_ready functions can add a device back onto the - * starved list's tail, so we must check for a infinite loop. - */ - if (sdev == starved_head) + if (scsi_host_is_busy(shost)) break; - if (!starved_head) - starved_head = sdev; + sdev = list_entry(starved_list.next, + struct scsi_device, starved_entry); + list_del_init(&sdev->starved_entry); if (scsi_target_is_busy(scsi_target(sdev))) { list_move_tail(&sdev->starved_entry, &shost->starved_list); continue; } - list_del_init(&sdev->starved_entry); spin_unlock(shost->host_lock); spin_lock(sdev->request_queue->queue_lock); @@ -621,6 +618,8 @@ static void scsi_run_queue(struct request_queue *q) spin_lock(shost->host_lock); } + /* put any unprocessed entries back */ + list_splice(&starved_list, &shost->starved_list); spin_unlock_irqrestore(shost->host_lock, flags); blk_run_queue(q); diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index c9e1242eaf2..5081b3981d3 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -757,7 +757,7 @@ static int sd_ioctl(struct block_device *bdev, fmode_t mode, * access to the device is prohibited. */ error = scsi_nonblockable_ioctl(sdp, cmd, p, - (mode & FMODE_NDELAY_NOW) != 0); + (mode & FMODE_NDELAY) != 0); if (!scsi_block_when_processing_errors(sdp) || !error) return error; diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 62b6633e3a9..45b66b98a51 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -521,7 +521,7 @@ static int sr_block_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd, * if it doesn't recognise the ioctl */ ret = scsi_nonblockable_ioctl(sdev, cmd, argp, - (mode & FMODE_NDELAY_NOW) != 0); + (mode & FMODE_NDELAY) != 0); if (ret != -ENODEV) return ret; return scsi_ioctl(sdev, cmd, argp); diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c index 3790906a77d..2fa830c0be2 100644 --- a/drivers/scsi/stex.c +++ b/drivers/scsi/stex.c @@ -477,7 +477,7 @@ stex_slave_config(struct scsi_device *sdev) { sdev->use_10_for_rw = 1; sdev->use_10_for_ms = 1; - sdev->timeout = 60 * HZ; + blk_queue_rq_timeout(sdev->request_queue, 60 * HZ); sdev->tagged_supported = 1; return 0; diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 579d63a81aa..b695ab3142d 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE config SERIAL_SAMSUNG tristate "Samsung SoC serial support" - depends on ARM && PLAT_S3C24XX + depends on ARM && PLAT_S3C select SERIAL_CORE help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, @@ -455,6 +455,16 @@ config SERIAL_SAMSUNG provide all of these ports, depending on how the serial port pins are configured. +config SERIAL_SAMSUNG_UARTS + int + depends on SERIAL_SAMSUNG + default 2 if ARCH_S3C2400 + default 4 if ARCH_S3C64XX || CPU_S3C2443 + default 3 + help + Select the number of available UART ports for the Samsung S3C + serial driver + config SERIAL_SAMSUNG_DEBUG bool "Samsung SoC serial debug" depends on SERIAL_SAMSUNG && DEBUG_LL @@ -508,7 +518,20 @@ config SERIAL_S3C2440 help Serial port support for the Samsung S3C2440 and S3C2442 SoC +config SERIAL_S3C24A0 + tristate "Samsung S3C24A0 Serial port support" + depends on SERIAL_SAMSUNG && CPU_S3C24A0 + default y if CPU_S3C24A0 + help + Serial port support for the Samsung S3C24A0 SoC +config SERIAL_S3C6400 + tristate "Samsung S3C6400/S3C6410 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S3C600 || CPU_S3C6410) + default y + help + Serial port support for the Samsung S3C6400 and S3C6410 + SoCs config SERIAL_DZ bool "DECstation DZ serial driver" diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 0c17c8ddb19..dfe775ac45b 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -41,6 +41,8 @@ obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o +obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o +obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_MUX) += mux.o obj-$(CONFIG_SERIAL_68328) += 68328serial.o diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index 71562689116..e3a5ad5ef1d 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -692,7 +692,7 @@ static int pl010_probe(struct amba_device *dev, void *id) goto free; } - uap->clk = clk_get(&dev->dev, "UARTCLK"); + uap->clk = clk_get(&dev->dev, NULL); if (IS_ERR(uap->clk)) { ret = PTR_ERR(uap->clk); goto unmap; diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index b7180046f8d..8b2b9700f3e 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -756,7 +756,7 @@ static int pl011_probe(struct amba_device *dev, void *id) goto free; } - uap->clk = clk_get(&dev->dev, "UARTCLK"); + uap->clk = clk_get(&dev->dev, NULL); if (IS_ERR(uap->clk)) { ret = PTR_ERR(uap->clk); goto unmap; diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index 3f90f1bbbbc..a50954612b6 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -66,7 +66,7 @@ #define ONEMS 0xb0 /* One Millisecond register */ #define UTS 0xb4 /* UART Test Register */ #endif -#ifdef CONFIG_ARCH_IMX +#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1) #define BIPR1 0xb0 /* Incremental Preset Register 1 */ #define BIPR2 0xb4 /* Incremental Preset Register 2 */ #define BIPR3 0xb8 /* Incremental Preset Register 3 */ @@ -96,7 +96,7 @@ #define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ #define UCR1_SNDBRK (1<<4) /* Send break */ #define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ -#ifdef CONFIG_ARCH_IMX +#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1) #define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ #endif #if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2 @@ -187,11 +187,11 @@ #define MAX_INTERNAL_IRQ IMX_IRQS #endif -#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2 +#ifdef CONFIG_ARCH_MXC #define SERIAL_IMX_MAJOR 207 #define MINOR_START 16 #define DEV_NAME "ttymxc" -#define MAX_INTERNAL_IRQ MXC_MAX_INT_LINES +#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS #endif /* diff --git a/drivers/serial/ioc3_serial.c b/drivers/serial/ioc3_serial.c index 6dd98f9fb89..ae3699d77dd 100644 --- a/drivers/serial/ioc3_serial.c +++ b/drivers/serial/ioc3_serial.c @@ -2149,7 +2149,7 @@ out4: return ret; } -static struct ioc3_submodule ioc3uart_submodule = { +static struct ioc3_submodule ioc3uart_ops = { .name = "IOC3uart", .probe = ioc3uart_probe, .remove = ioc3uart_remove, @@ -2173,7 +2173,7 @@ static int __devinit ioc3uart_init(void) __func__); return ret; } - ret = ioc3_register_submodule(&ioc3uart_submodule); + ret = ioc3_register_submodule(&ioc3uart_ops); if (ret) uart_unregister_driver(&ioc3_uart); return ret; @@ -2181,7 +2181,7 @@ static int __devinit ioc3uart_init(void) static void __devexit ioc3uart_exit(void) { - ioc3_unregister_submodule(&ioc3uart_submodule); + ioc3_unregister_submodule(&ioc3uart_ops); uart_unregister_driver(&ioc3_uart); } diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index 6117d3db0b6..28c00c3d58f 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -591,8 +591,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, /* Update the per-port timeout */ uart_update_timeout(port, new->c_cflag, baud); - /* Do our best to flush TX & RX, so we don't loose anything */ - /* But we don't wait indefinitly ! */ + /* Do our best to flush TX & RX, so we don't lose anything */ + /* But we don't wait indefinitely ! */ j = 5000000; /* Maximum wait */ /* FIXME Can't receive chars since set_termios might be called at early * boot for the console, all stuff is not yet ready to receive at that diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index a793d1fa1cd..f6e3b86bb0b 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -767,7 +767,7 @@ static int serial_pxa_probe(struct platform_device *dev) if (!sport) return -ENOMEM; - sport->clk = clk_get(&dev->dev, "UARTCLK"); + sport->clk = clk_get(&dev->dev, NULL); if (IS_ERR(sport->clk)) { ret = PTR_ERR(sport->clk); goto err_free; diff --git a/drivers/serial/s3c2440.c b/drivers/serial/s3c2440.c index 317d239ab74..29cbb0afef8 100644 --- a/drivers/serial/s3c2440.c +++ b/drivers/serial/s3c2440.c @@ -177,5 +177,5 @@ module_exit(s3c2440_serial_exit); MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPLi v2"); +MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:s3c2440-uart"); diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c new file mode 100644 index 00000000000..ebf2fd3c8f7 --- /dev/null +++ b/drivers/serial/s3c24a0.c @@ -0,0 +1,118 @@ +/* linux/drivers/serial/s3c24a0.c + * + * Driver for Samsung S3C24A0 SoC onboard UARTs. + * + * Based on drivers/serial/s3c2410.c + * + * Author: Sandeep Patil <sandeep.patil@azingo.com> + * + * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/io.h> +#include <linux/irq.h> + +#include <mach/hardware.h> + +#include <plat/regs-serial.h> +#include <mach/regs-gpio.h> + +#include "samsung.h" + +static int s3c24a0_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "uclk") == 0) + ucon |= S3C2410_UCON_UCLK; + else + ucon &= ~S3C2410_UCON_UCLK; + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + +static int s3c24a0_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; + + return 0; +} + +static int s3c24a0_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + wr_regl(port, S3C2410_UCON, cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c24a0_uart_inf = { + .name = "Samsung S3C24A0 UART", + .type = PORT_S3C2410, + .fifosize = 16, + .rx_fifomask = S3C24A0_UFSTAT_RXMASK, + .rx_fifoshift = S3C24A0_UFSTAT_RXSHIFT, + .rx_fifofull = S3C24A0_UFSTAT_RXFULL, + .tx_fifofull = S3C24A0_UFSTAT_TXFULL, + .tx_fifomask = S3C24A0_UFSTAT_TXMASK, + .tx_fifoshift = S3C24A0_UFSTAT_TXSHIFT, + .get_clksrc = s3c24a0_serial_getsource, + .set_clksrc = s3c24a0_serial_setsource, + .reset_port = s3c24a0_serial_resetport, +}; + +static int s3c24a0_serial_probe(struct platform_device *dev) +{ + return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf); +} + +static struct platform_driver s3c24a0_serial_drv = { + .probe = s3c24a0_serial_probe, + .remove = s3c24xx_serial_remove, + .driver = { + .name = "s3c24a0-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf); + +static int __init s3c24a0_serial_init(void) +{ + return s3c24xx_serial_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf); +} + +static void __exit s3c24a0_serial_exit(void) +{ + platform_driver_unregister(&s3c24a0_serial_drv); +} + +module_init(s3c24a0_serial_init); +module_exit(s3c24a0_serial_exit); + diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c new file mode 100644 index 00000000000..06936d13393 --- /dev/null +++ b/drivers/serial/s3c6400.c @@ -0,0 +1,151 @@ +/* linux/drivers/serial/s3c6400.c + * + * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs. + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/serial.h> + +#include <asm/irq.h> +#include <mach/hardware.h> + +#include <plat/regs-serial.h> + +#include "samsung.h" + +static int s3c6400_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "uclk0") == 0) { + ucon &= ~S3C6400_UCON_CLKMASK; + ucon |= S3C6400_UCON_UCLK0; + } else if (strcmp(clk->name, "uclk1") == 0) + ucon |= S3C6400_UCON_UCLK1; + else if (strcmp(clk->name, "pclk") == 0) { + /* See notes about transitioning from UCLK to PCLK */ + ucon &= ~S3C6400_UCON_UCLK0; + } else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s3c6400_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + u32 ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + + switch (ucon & S3C6400_UCON_CLKMASK) { + case S3C6400_UCON_UCLK0: + clk->name = "uclk0"; + break; + + case S3C6400_UCON_UCLK1: + clk->name = "uclk1"; + break; + + case S3C6400_UCON_PCLK: + case S3C6400_UCON_PCLK2: + clk->name = "pclk"; + break; + } + + return 0; +} + +static int s3c6400_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + /* ensure we don't change the clock settings... */ + + ucon &= S3C6400_UCON_CLKMASK; + + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c6400_uart_inf = { + .name = "Samsung S3C6400 UART", + .type = PORT_S3C6400, + .fifosize = 64, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .get_clksrc = s3c6400_serial_getsource, + .set_clksrc = s3c6400_serial_setsource, + .reset_port = s3c6400_serial_resetport, +}; + +/* device management */ + +static int s3c6400_serial_probe(struct platform_device *dev) +{ + dbg("s3c6400_serial_probe: dev=%p\n", dev); + return s3c24xx_serial_probe(dev, &s3c6400_uart_inf); +} + +static struct platform_driver s3c6400_serial_drv = { + .probe = s3c6400_serial_probe, + .remove = s3c24xx_serial_remove, + .driver = { + .name = "s3c6400-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c6400_serial_drv, &s3c6400_uart_inf); + +static int __init s3c6400_serial_init(void) +{ + return s3c24xx_serial_init(&s3c6400_serial_drv, &s3c6400_uart_inf); +} + +static void __exit s3c6400_serial_exit(void) +{ + platform_driver_unregister(&s3c6400_serial_drv); +} + +module_init(s3c6400_serial_init); +module_exit(s3c6400_serial_exit); + +MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver"); +MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:s3c6400-uart"); diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 1e219d3d035..41ac94872b8 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -42,13 +42,14 @@ #include <linux/serial.h> #include <linux/delay.h> #include <linux/clk.h> +#include <linux/cpufreq.h> #include <asm/irq.h> #include <mach/hardware.h> +#include <mach/map.h> #include <plat/regs-serial.h> -#include <mach/regs-gpio.h> #include "samsung.h" @@ -58,19 +59,6 @@ #define S3C24XX_SERIAL_MAJOR 204 #define S3C24XX_SERIAL_MINOR 64 -/* we can support 3 uarts, but not always use them */ - -#ifdef CONFIG_CPU_S3C2400 -#define NR_PORTS (2) -#else -#define NR_PORTS (3) -#endif - -/* port irq numbers */ - -#define TX_IRQ(port) ((port)->irq + 1) -#define RX_IRQ(port) ((port)->irq) - /* macros to change one thing to another */ #define tx_enabled(port) ((port)->unused[0]) @@ -136,8 +124,10 @@ static void s3c24xx_serial_rx_disable(struct uart_port *port) static void s3c24xx_serial_stop_tx(struct uart_port *port) { + struct s3c24xx_uart_port *ourport = to_ourport(port); + if (tx_enabled(port)) { - disable_irq(TX_IRQ(port)); + disable_irq(ourport->tx_irq); tx_enabled(port) = 0; if (port->flags & UPF_CONS_FLOW) s3c24xx_serial_rx_enable(port); @@ -146,11 +136,13 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port) static void s3c24xx_serial_start_tx(struct uart_port *port) { + struct s3c24xx_uart_port *ourport = to_ourport(port); + if (!tx_enabled(port)) { if (port->flags & UPF_CONS_FLOW) s3c24xx_serial_rx_disable(port); - enable_irq(TX_IRQ(port)); + enable_irq(ourport->tx_irq); tx_enabled(port) = 1; } } @@ -158,9 +150,11 @@ static void s3c24xx_serial_start_tx(struct uart_port *port) static void s3c24xx_serial_stop_rx(struct uart_port *port) { + struct s3c24xx_uart_port *ourport = to_ourport(port); + if (rx_enabled(port)) { dbg("s3c24xx_serial_stop_rx: port=%p\n", port); - disable_irq(RX_IRQ(port)); + disable_irq(ourport->rx_irq); rx_enabled(port) = 0; } } @@ -384,13 +378,13 @@ static void s3c24xx_serial_shutdown(struct uart_port *port) struct s3c24xx_uart_port *ourport = to_ourport(port); if (ourport->tx_claimed) { - free_irq(TX_IRQ(port), ourport); + free_irq(ourport->tx_irq, ourport); tx_enabled(port) = 0; ourport->tx_claimed = 0; } if (ourport->rx_claimed) { - free_irq(RX_IRQ(port), ourport); + free_irq(ourport->rx_irq, ourport); ourport->rx_claimed = 0; rx_enabled(port) = 0; } @@ -407,12 +401,11 @@ static int s3c24xx_serial_startup(struct uart_port *port) rx_enabled(port) = 1; - ret = request_irq(RX_IRQ(port), - s3c24xx_serial_rx_chars, 0, + ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0, s3c24xx_serial_portname(port), ourport); if (ret != 0) { - printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port)); + printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq); return ret; } @@ -422,12 +415,11 @@ static int s3c24xx_serial_startup(struct uart_port *port) tx_enabled(port) = 1; - ret = request_irq(TX_IRQ(port), - s3c24xx_serial_tx_chars, 0, + ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0, s3c24xx_serial_portname(port), ourport); if (ret) { - printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port)); + printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq); goto err; } @@ -452,6 +444,8 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, { struct s3c24xx_uart_port *ourport = to_ourport(port); + ourport->pm_level = level; + switch (level) { case 3: if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) @@ -661,6 +655,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, ourport->clksrc = clksrc; ourport->baudclk = clk; + ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; } switch (termios->c_cflag & CSIZE) { @@ -752,6 +747,8 @@ static const char *s3c24xx_serial_type(struct uart_port *port) return "S3C2440"; case PORT_S3C2412: return "S3C2412"; + case PORT_S3C6400: + return "S3C6400/10"; default: return NULL; } @@ -827,14 +824,14 @@ static struct uart_ops s3c24xx_serial_ops = { static struct uart_driver s3c24xx_uart_drv = { .owner = THIS_MODULE, .dev_name = "s3c2410_serial", - .nr = 3, + .nr = CONFIG_SERIAL_SAMSUNG_UARTS, .cons = S3C24XX_SERIAL_CONSOLE, .driver_name = S3C24XX_SERIAL_NAME, .major = S3C24XX_SERIAL_MAJOR, .minor = S3C24XX_SERIAL_MINOR, }; -static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = { +static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = { [0] = { .port = { .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock), @@ -859,7 +856,7 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = { .line = 1, } }, -#if NR_PORTS > 2 +#if CONFIG_SERIAL_SAMSUNG_UARTS > 2 [2] = { .port = { @@ -872,6 +869,20 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = { .flags = UPF_BOOT_AUTOCONF, .line = 2, } + }, +#endif +#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 + [3] = { + .port = { + .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock), + .iotype = UPIO_MEM, + .irq = IRQ_S3CUART_RX3, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 3, + } } #endif }; @@ -890,6 +901,89 @@ static inline int s3c24xx_serial_resetport(struct uart_port *port, return (info->reset_port)(port, cfg); } + +#ifdef CONFIG_CPU_FREQ + +static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct s3c24xx_uart_port *port; + struct uart_port *uport; + + port = container_of(nb, struct s3c24xx_uart_port, freq_transition); + uport = &port->port; + + /* check to see if port is enabled */ + + if (port->pm_level != 0) + return 0; + + /* try and work out if the baudrate is changing, we can detect + * a change in rate, but we do not have support for detecting + * a disturbance in the clock-rate over the change. + */ + + if (IS_ERR(port->clk)) + goto exit; + + if (port->baudclk_rate == clk_get_rate(port->clk)) + goto exit; + + if (val == CPUFREQ_PRECHANGE) { + /* we should really shut the port down whilst the + * frequency change is in progress. */ + + } else if (val == CPUFREQ_POSTCHANGE) { + struct ktermios *termios; + struct tty_struct *tty; + + if (uport->info == NULL) + goto exit; + + tty = uport->info->port.tty; + + if (tty == NULL) + goto exit; + + termios = tty->termios; + + if (termios == NULL) { + printk(KERN_WARNING "%s: no termios?\n", __func__); + goto exit; + } + + s3c24xx_serial_set_termios(uport, termios, NULL); + } + + exit: + return 0; +} + +static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) +{ + port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition; + + return cpufreq_register_notifier(&port->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) +{ + cpufreq_unregister_notifier(&port->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +#else +static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) +{ + return 0; +} + +static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) +{ +} +#endif + /* s3c24xx_serial_init_port * * initialise a single serial port from the platform device given @@ -914,8 +1008,11 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, if (port->mapbase != 0) return 0; - if (cfg->hwport > 3) - return -EINVAL; + if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) { + printk(KERN_ERR "%s: port %d bigger than %d\n", __func__, + cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS); + return -ERANGE; + } /* setup info for port */ port->dev = &platdev->dev; @@ -943,18 +1040,26 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); - port->mapbase = res->start; - port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART); + port->mapbase = res->start; + port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000); ret = platform_get_irq(platdev, 0); if (ret < 0) port->irq = 0; - else + else { port->irq = ret; + ourport->rx_irq = ret; + ourport->tx_irq = ret + 1; + } + + ret = platform_get_irq(platdev, 1); + if (ret > 0) + ourport->tx_irq = ret; ourport->clk = clk_get(&platdev->dev, "uart"); - dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n", - port->mapbase, port->membase, port->irq, port->uartclk); + dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n", + port->mapbase, port->membase, port->irq, + ourport->rx_irq, ourport->tx_irq, port->uartclk); /* reset the fifos (and setup the uart) */ s3c24xx_serial_resetport(port, cfg); @@ -1002,6 +1107,10 @@ int s3c24xx_serial_probe(struct platform_device *dev, if (ret < 0) printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__); + ret = s3c24xx_serial_cpufreq_register(ourport); + if (ret < 0) + dev_err(&dev->dev, "failed to add cpufreq notifier\n"); + return 0; probe_err: @@ -1015,6 +1124,7 @@ int s3c24xx_serial_remove(struct platform_device *dev) struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); if (port) { + s3c24xx_serial_cpufreq_deregister(to_ourport(port)); device_remove_file(&dev->dev, &dev_attr_clock_source); uart_remove_one_port(&s3c24xx_uart_drv, port); } @@ -1219,7 +1329,7 @@ static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info) platdev_ptr = s3c24xx_uart_devs; - for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) { + for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) { s3c24xx_serial_init_port(ptr, info, *platdev_ptr); } @@ -1240,7 +1350,7 @@ s3c24xx_serial_console_setup(struct console *co, char *options) /* is this a valid port */ - if (co->index == -1 || co->index >= NR_PORTS) + if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS) co->index = 0; port = &s3c24xx_serial_ports[co->index].port; diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h index 5c92ebbe7d9..571d6b90d20 100644 --- a/drivers/serial/samsung.h +++ b/drivers/serial/samsung.h @@ -33,12 +33,21 @@ struct s3c24xx_uart_info { struct s3c24xx_uart_port { unsigned char rx_claimed; unsigned char tx_claimed; + unsigned int pm_level; + unsigned long baudclk_rate; + + unsigned int rx_irq; + unsigned int tx_irq; struct s3c24xx_uart_info *info; struct s3c24xx_uart_clksrc *clksrc; struct clk *clk; struct clk *baudclk; struct uart_port port; + +#ifdef CONFIG_CPU_FREQ + struct notifier_block freq_transition; +#endif }; /* conversion functions */ diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c index 61dc8b3daa2..a7bf024a828 100644 --- a/drivers/serial/serial_lh7a40x.c +++ b/drivers/serial/serial_lh7a40x.c @@ -41,9 +41,10 @@ #include <linux/tty_flip.h> #include <linux/serial_core.h> #include <linux/serial.h> +#include <linux/io.h> -#include <asm/io.h> #include <asm/irq.h> +#include <mach/hardware.h> #define DEV_MAJOR 204 #define DEV_MINOR 16 diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index 6a3f8fb0c9d..3317148a4b9 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -286,8 +286,8 @@ static void ulite_release_port(struct uart_port *port) static int ulite_request_port(struct uart_port *port) { - pr_debug("ulite console: port=%p; port->mapbase=%x\n", - port, port->mapbase); + pr_debug("ulite console: port=%p; port->mapbase=%llx\n", + port, (unsigned long long) port->mapbase); if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) { dev_err(port->dev, "Memory region busy\n"); diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c index 87b73e0169c..b02f25c702f 100644 --- a/drivers/spi/au1550_spi.c +++ b/drivers/spi/au1550_spi.c @@ -369,10 +369,23 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t) dma_rx_addr = t->rx_dma; /* - * check if buffers are already dma mapped, map them otherwise + * check if buffers are already dma mapped, map them otherwise: + * - first map the TX buffer, so cache data gets written to memory + * - then map the RX buffer, so that cache entries (with + * soon-to-be-stale data) get removed * use rx buffer in place of tx if tx buffer was not provided * use temp rx buffer (preallocated or realloc to fit) for rx dma */ + if (t->tx_buf) { + if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ + dma_tx_addr = dma_map_single(hw->dev, + (void *)t->tx_buf, + t->len, DMA_TO_DEVICE); + if (dma_mapping_error(hw->dev, dma_tx_addr)) + dev_err(hw->dev, "tx dma map error\n"); + } + } + if (t->rx_buf) { if (t->rx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ dma_rx_addr = dma_map_single(hw->dev, @@ -396,15 +409,8 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t) dma_sync_single_for_device(hw->dev, dma_rx_addr, t->len, DMA_FROM_DEVICE); } - if (t->tx_buf) { - if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */ - dma_tx_addr = dma_map_single(hw->dev, - (void *)t->tx_buf, - t->len, DMA_TO_DEVICE); - if (dma_mapping_error(hw->dev, dma_tx_addr)) - dev_err(hw->dev, "tx dma map error\n"); - } - } else { + + if (!t->tx_buf) { dma_sync_single_for_device(hw->dev, dma_rx_addr, t->len, DMA_BIDIRECTIONAL); hw->tx = hw->rx; diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c index 0debe11b67b..3b97803e1d1 100644 --- a/drivers/spi/mpc52xx_psc_spi.c +++ b/drivers/spi/mpc52xx_psc_spi.c @@ -142,6 +142,7 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi, unsigned rfalarm; unsigned send_at_once = MPC52xx_PSC_BUFSIZE; unsigned recv_at_once; + int last_block = 0; if (!t->tx_buf && !t->rx_buf && t->len) return -EINVAL; @@ -151,15 +152,17 @@ static int mpc52xx_psc_spi_transfer_rxtx(struct spi_device *spi, while (rb < t->len) { if (t->len - rb > MPC52xx_PSC_BUFSIZE) { rfalarm = MPC52xx_PSC_RFALARM; + last_block = 0; } else { send_at_once = t->len - sb; rfalarm = MPC52xx_PSC_BUFSIZE - (t->len - rb); + last_block = 1; } dev_dbg(&spi->dev, "send %d bytes...\n", send_at_once); for (; send_at_once; sb++, send_at_once--) { /* set EOF flag before the last word is sent */ - if (send_at_once == 1) + if (send_at_once == 1 && last_block) out_8(&psc->ircr2, 0x01); if (tx_buf) diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index cf12f2d84be..6104f461a3c 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -32,8 +32,8 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/delay.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/hardware.h> #include <mach/pxa-regs.h> #include <mach/regs-ssp.h> diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 0b4db0ce78d..269a55ec52e 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -1456,7 +1456,7 @@ static int __init spi_imx_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct spi_imx_master *platform_info; struct spi_master *master; - struct driver_data *drv_data = NULL; + struct driver_data *drv_data; struct resource *res; int irq, status = 0; @@ -1467,14 +1467,6 @@ static int __init spi_imx_probe(struct platform_device *pdev) goto err_no_pdata; } - drv_data->clk = clk_get(&pdev->dev, "perclk2"); - if (IS_ERR(drv_data->clk)) { - dev_err(&pdev->dev, "probe - cannot get get\n"); - status = PTR_ERR(drv_data->clk); - goto err_no_clk; - } - clk_enable(drv_data->clk); - /* Allocate master with space for drv_data */ master = spi_alloc_master(dev, sizeof(struct driver_data)); if (!master) { @@ -1495,6 +1487,14 @@ static int __init spi_imx_probe(struct platform_device *pdev) drv_data->dummy_dma_buf = SPI_DUMMY_u32; + drv_data->clk = clk_get(&pdev->dev, "perclk2"); + if (IS_ERR(drv_data->clk)) { + dev_err(&pdev->dev, "probe - cannot get clock\n"); + status = PTR_ERR(drv_data->clk); + goto err_no_clk; + } + clk_enable(drv_data->clk); + /* Find and map resources */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -1630,12 +1630,13 @@ err_no_iomap: kfree(drv_data->ioarea); err_no_iores: - spi_master_put(master); - -err_no_pdata: clk_disable(drv_data->clk); clk_put(drv_data->clk); + err_no_clk: + spi_master_put(master); + +err_no_pdata: err_no_mem: return status; } diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index c252cbac00f..256d18395a2 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -28,7 +28,7 @@ #include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/regs-spi.h> +#include <plat/regs-spi.h> #include <mach/spi.h> struct s3c24xx_spi { diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c index cc1f647f579..f2447a5476b 100644 --- a/drivers/spi/spi_s3c24xx_gpio.c +++ b/drivers/spi/spi_s3c24xx_gpio.c @@ -34,7 +34,7 @@ struct s3c2410_spigpio { static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi) { - return spi->controller_data; + return spi_master_get_devdata(spi->master); } static inline void setsck(struct spi_device *dev, int on) @@ -118,6 +118,7 @@ static int s3c2410_spigpio_probe(struct platform_device *dev) /* setup spi bitbang adaptor */ sp->bitbang.master = spi_master_get(master); sp->bitbang.master->bus_num = info->bus_num; + sp->bitbang.master->num_chipselect = info->num_chipselect; sp->bitbang.chipselect = s3c2410_spigpio_chipselect; sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0; diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 89a43755a45..5d869c4d3eb 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -597,7 +597,9 @@ static int spidev_probe(struct spi_device *spi) } mutex_unlock(&device_list_lock); - if (status != 0) + if (status == 0) + spi_set_drvdata(spi, spidev); + else kfree(spidev); return status; diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 1fe8b44787b..b3408ff39fb 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -2363,6 +2363,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) nuke(loop_ep, -ESHUTDOWN); spin_unlock_irqrestore(&udc_controller->lock, flags); + /* report disconnect; the controller is already quiesced */ + driver->disconnect(&udc_controller->gadget); + /* unbind gadget and unhook driver. */ driver->unbind(&udc_controller->gadget); udc_controller->gadget.dev.driver = NULL; diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index 091bb55c9aa..f3c6703cffd 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -1836,6 +1836,9 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) nuke(loop_ep, -ESHUTDOWN); spin_unlock_irqrestore(&udc_controller->lock, flags); + /* report disconnect; the controller is already quiesced */ + driver->disconnect(&udc_controller->gadget); + /* unbind gadget and unhook driver. */ driver->unbind(&udc_controller->gadget); udc_controller->gadget.dev.driver = NULL; diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index da6e93c201d..8c5026be79d 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -141,7 +141,11 @@ static int is_vbus_present(void) if (mach->gpio_vbus) { int value = gpio_get_value(mach->gpio_vbus); - return mach->gpio_vbus_inverted ? !value : value; + + if (mach->gpio_vbus_inverted) + return !value; + else + return !!value; } if (mach->udc_is_connected) return mach->udc_is_connected(); @@ -982,7 +986,7 @@ static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active) struct pxa25x_udc *udc; udc = container_of(_gadget, struct pxa25x_udc, gadget); - udc->vbus = (is_active != 0); + udc->vbus = is_active; DMSG("vbus %s\n", is_active ? "supplied" : "inactive"); pullup(udc); return 0; @@ -1399,12 +1403,8 @@ lubbock_vbus_irq(int irq, void *_dev) static irqreturn_t udc_vbus_irq(int irq, void *_dev) { struct pxa25x_udc *dev = _dev; - int vbus = gpio_get_value(dev->mach->gpio_vbus); - if (dev->mach->gpio_vbus_inverted) - vbus = !vbus; - - pxa25x_udc_vbus_session(&dev->gadget, vbus); + pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present()); return IRQ_HANDLED; } @@ -2145,7 +2145,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) if (irq < 0) return -ENODEV; - dev->clk = clk_get(&pdev->dev, "UDCCLK"); + dev->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) { retval = PTR_ERR(dev->clk); goto err_clk; diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index caa37c95802..944e4ff641d 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -2226,7 +2226,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev) udc->dev = &pdev->dev; udc->mach = pdev->dev.platform_data; - udc->clk = clk_get(&pdev->dev, "UDCCLK"); + udc->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(udc->clk)) { retval = PTR_ERR(udc->clk); goto err_clk; diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 00ba06b4475..8d8d6516598 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -53,8 +53,8 @@ #include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/regs-udc.h> -#include <asm/plat-s3c24xx/udc.h> +#include <plat/regs-udc.h> +#include <plat/udc.h> #include "s3c2410_udc.h" diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 5416cf96900..9d487908012 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -33,8 +33,9 @@ /* * Implement Orion USB controller specification guidelines */ -static void orion_usb_setup(struct usb_hcd *hcd) +static void orion_usb_phy_v1_setup(struct usb_hcd *hcd) { + /* The below GLs are according to the Orion Errata document */ /* * Clear interrupt cause and mask */ @@ -258,9 +259,19 @@ static int __init ehci_orion_drv_probe(struct platform_device *pdev) ehci_orion_conf_mbus_windows(hcd, pd->dram); /* - * setup Orion USB controller + * setup Orion USB controller. */ - orion_usb_setup(hcd); + switch (pd->phy_version) { + case EHCI_PHY_NA: /* dont change USB phy settings */ + break; + case EHCI_PHY_ORION: + orion_usb_phy_v1_setup(hcd); + break; + case EHCI_PHY_DD: + case EHCI_PHY_KW: + default: + printk(KERN_WARNING "Orion ehci -USB phy version isn't supported.\n"); + } err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED); if (err) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 9d0ea573aef..36864f95844 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -169,18 +169,21 @@ static int ehci_pci_setup(struct usb_hcd *hcd) } break; case PCI_VENDOR_ID_ATI: - /* SB700 old version has a bug in EHCI controller, + /* SB600 and old version of SB700 have a bug in EHCI controller, * which causes usb devices lose response in some cases. */ - if (pdev->device == 0x4396) { + if ((pdev->device == 0x4386) || (pdev->device == 0x4396)) { p_smbus = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL); if (!p_smbus) break; rev = p_smbus->revision; - if ((rev == 0x3a) || (rev == 0x3b)) { + if ((pdev->device == 0x4386) || (rev == 0x3a) + || (rev == 0x3b)) { u8 tmp; + ehci_info(ehci, "applying AMD SB600/SB700 USB " + "freeze workaround\n"); pci_read_config_byte(pdev, 0x53, &tmp); pci_write_config_byte(pdev, 0x53, tmp | (1<<3)); } diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index b11798d17ae..c7d4b5a06bd 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -183,16 +183,14 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) * the async ring; just the I/O watchdog. Note that if a * SHRINK were pending, OFF would never be requested. */ - enum ehci_timer_action oldactions = ehci->actions; + if (timer_pending(&ehci->watchdog) + && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF)) + & ehci->actions)) + return; if (!test_and_set_bit (action, &ehci->actions)) { unsigned long t; - if (timer_pending(&ehci->watchdog) - && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF)) - & oldactions)) - return; - switch (action) { case TIMER_IO_WATCHDOG: t = EHCI_IO_JIFFIES; @@ -208,7 +206,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1; break; } - mod_timer(&ehci->watchdog, round_jiffies(t + jiffies)); + mod_timer(&ehci->watchdog, t + jiffies); } } diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 91697bdb399..4bbddb73abd 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -18,6 +18,7 @@ #include <linux/jiffies.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/gpio.h> #include <mach/hardware.h> #include <asm/io.h> @@ -25,7 +26,6 @@ #include <mach/mux.h> #include <mach/irqs.h> -#include <mach/gpio.h> #include <mach/fpga.h> #include <mach/usb.h> @@ -254,8 +254,8 @@ static int ohci_omap_init(struct usb_hcd *hcd) /* gpio9 for overcurrent detction */ omap_cfg_reg(W8_1610_GPIO9); - omap_request_gpio(9); - omap_set_gpio_direction(9, 1 /* IN */); + gpio_request(9, "OHCI overcurrent"); + gpio_direction_input(9); /* for paranoia's sake: disable USB.PUEN */ omap_cfg_reg(W4_USB_HIGHZ); @@ -407,7 +407,7 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) put_device(ohci->transceiver->dev); } if (machine_is_omap_osk()) - omap_free_gpio(9); + gpio_free(9); iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index e294d430733..e44dc2cbca2 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -296,7 +296,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device return -ENXIO; } - usb_clk = clk_get(&pdev->dev, "USBCLK"); + usb_clk = clk_get(&pdev->dev, NULL); if (IS_ERR(usb_clk)) return PTR_ERR(usb_clk); diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 5b20de130e0..5b95009d2fb 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -135,6 +135,7 @@ static int usb_console_setup(struct console *co, char *options) err("no more memory"); goto reset_open_count; } + kref_init(&tty->kref); termios = kzalloc(sizeof(*termios), GFP_KERNEL); if (!termios) { retval = -ENOMEM; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 51d7bdea286..aad1359a3eb 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1498,7 +1498,7 @@ static int ftdi_open(struct tty_struct *tty, priv->interface, buf, 0, WDR_TIMEOUT); /* Termios defaults are set by usb_serial_init. We don't change - port->tty->termios - this would loose speed settings, etc. + port->tty->termios - this would lose speed settings, etc. This is same behaviour as serial.c/rs_open() - Kuba */ /* ftdi_set_termios will send usb control messages */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6fa1ec441b6..809697b3c7f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -224,6 +224,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define ONDA_VENDOR_ID 0x19d2 #define ONDA_PRODUCT_MSA501HS 0x0001 #define ONDA_PRODUCT_ET502HS 0x0002 +#define ONDA_PRODUCT_MT503HS 0x0200 #define BANDRICH_VENDOR_ID 0x1A8D #define BANDRICH_PRODUCT_C100_1 0x1002 @@ -413,6 +414,40 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) }, { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0003) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0004) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0005) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0006) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0007) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0008) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0009) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000a) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000b) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000c) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000d) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000e) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x000f) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0010) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0011) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0012) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0013) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0014) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0015) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0016) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0017) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0018) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0019) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0020) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0021) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0022) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0023) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0024) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0025) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0026) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0027) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0028) }, + { USB_DEVICE(ONDA_VENDOR_ID, 0x0029) }, + { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) }, { USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 6da9a7a962a..e61f2bfc64a 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -318,6 +318,18 @@ UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101, US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0), #endif +/* Reported by Tamas Kerecsen <kerecsen@bigfoot.com> + * Obviously the PROM has not been customized by the VAR; + * the Vendor and Product string descriptors are: + * Generic Mass Storage (PROTOTYPE--Remember to change idVendor) + * Generic Manufacturer (PROTOTYPE--Remember to change idVendor) + */ +UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000, + "Mitac", + "GPS", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + /* * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.) * Reported by Pete Zaitcev <zaitcev@redhat.com> @@ -377,6 +389,13 @@ UNUSUAL_DEV( 0x04b0, 0x0401, 0x0200, 0x0200, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by Tobias Kunze Briseno <t-linux@fictive.com> */ +UNUSUAL_DEV( 0x04b0, 0x0403, 0x0200, 0x0200, + "NIKON", + "NIKON DSC D2H", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Reported by Milinevsky Dmitry <niam.niam@gmail.com> */ UNUSUAL_DEV( 0x04b0, 0x0409, 0x0100, 0x0100, "NIKON", diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 486d81ca02a..bc2645db158 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -362,7 +362,7 @@ endchoice config FB_ACORN bool "Acorn VIDC support" - depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500) + depends on (FB = y) && ARM && ARCH_ACORN select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index a7a1c891bfa..2ac52fd8cc1 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -343,14 +343,14 @@ static int clcdfb_register(struct clcd_fb *fb) { int ret; - fb->clk = clk_get(&fb->dev->dev, "CLCDCLK"); + fb->clk = clk_get(&fb->dev->dev, NULL); if (IS_ERR(fb->clk)) { ret = PTR_ERR(fb->clk); goto out; } fb->fb.fix.mmio_start = fb->dev->res.start; - fb->fb.fix.mmio_len = SZ_4K; + fb->fb.fix.mmio_len = 4096; fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len); if (!fb->regs) { diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/aty/radeon_accel.c index 8718f7349d6..a469a3d6edc 100644 --- a/drivers/video/aty/radeon_accel.c +++ b/drivers/video/aty/radeon_accel.c @@ -5,61 +5,61 @@ * --dte */ -#define FLUSH_CACHE_WORKAROUND 1 - -void radeon_fifo_update_and_wait(struct radeonfb_info *rinfo, int entries) +static void radeon_fixup_offset(struct radeonfb_info *rinfo) { - int i; + u32 local_base; + + /* *** Ugly workaround *** */ + /* + * On some platforms, the video memory is mapped at 0 in radeon chip space + * (like PPCs) by the firmware. X will always move it up so that it's seen + * by the chip to be at the same address as the PCI BAR. + * That means that when switching back from X, there is a mismatch between + * the offsets programmed into the engine. This means that potentially, + * accel operations done before radeonfb has a chance to re-init the engine + * will have incorrect offsets, and potentially trash system memory ! + * + * The correct fix is for fbcon to never call any accel op before the engine + * has properly been re-initialized (by a call to set_var), but this is a + * complex fix. This workaround in the meantime, called before every accel + * operation, makes sure the offsets are in sync. + */ - for (i=0; i<2000000; i++) { - rinfo->fifo_free = INREG(RBBM_STATUS) & 0x7f; - if (rinfo->fifo_free >= entries) - return; - udelay(10); - } - printk(KERN_ERR "radeonfb: FIFO Timeout !\n"); - /* XXX Todo: attempt to reset the engine */ -} + radeon_fifo_wait (1); + local_base = INREG(MC_FB_LOCATION) << 16; + if (local_base == rinfo->fb_local_base) + return; -static inline void radeon_fifo_wait(struct radeonfb_info *rinfo, int entries) -{ - if (entries <= rinfo->fifo_free) - rinfo->fifo_free -= entries; - else - radeon_fifo_update_and_wait(rinfo, entries); -} + rinfo->fb_local_base = local_base; -static inline void radeonfb_set_creg(struct radeonfb_info *rinfo, u32 reg, - u32 *cache, u32 new_val) -{ - if (new_val == *cache) - return; - *cache = new_val; - radeon_fifo_wait(rinfo, 1); - OUTREG(reg, new_val); + radeon_fifo_wait (3); + OUTREG(DEFAULT_PITCH_OFFSET, (rinfo->pitch << 0x16) | + (rinfo->fb_local_base >> 10)); + OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10)); + OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10)); } static void radeonfb_prim_fillrect(struct radeonfb_info *rinfo, const struct fb_fillrect *region) { - radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache, - rinfo->dp_gui_mc_base | GMC_BRUSH_SOLID_COLOR | ROP3_P); - radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache, - DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM); - radeonfb_set_creg(rinfo, DP_BRUSH_FRGD_CLR, &rinfo->dp_brush_fg_cache, - region->color); - - /* Ensure the dst cache is flushed and the engine idle before - * issuing the operation. - * - * This works around engine lockups on some cards - */ -#if FLUSH_CACHE_WORKAROUND - radeon_fifo_wait(rinfo, 2); + radeon_fifo_wait(4); + + OUTREG(DP_GUI_MASTER_CNTL, + rinfo->dp_gui_master_cntl /* contains, like GMC_DST_32BPP */ + | GMC_BRUSH_SOLID_COLOR + | ROP3_P); + if (radeon_get_dstbpp(rinfo->depth) != DST_8BPP) + OUTREG(DP_BRUSH_FRGD_CLR, rinfo->pseudo_palette[region->color]); + else + OUTREG(DP_BRUSH_FRGD_CLR, region->color); + OUTREG(DP_WRITE_MSK, 0xffffffff); + OUTREG(DP_CNTL, (DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM)); + + radeon_fifo_wait(2); OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL); OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE)); -#endif - radeon_fifo_wait(rinfo, 2); + + radeon_fifo_wait(2); OUTREG(DST_Y_X, (region->dy << 16) | region->dx); OUTREG(DST_WIDTH_HEIGHT, (region->width << 16) | region->height); } @@ -70,14 +70,15 @@ void radeonfb_fillrect(struct fb_info *info, const struct fb_fillrect *region) struct fb_fillrect modded; int vxres, vyres; - WARN_ON(rinfo->gfx_mode); - if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode) + if (info->state != FBINFO_STATE_RUNNING) return; if (info->flags & FBINFO_HWACCEL_DISABLED) { cfb_fillrect(info, region); return; } + radeon_fixup_offset(rinfo); + vxres = info->var.xres_virtual; vyres = info->var.yres_virtual; @@ -90,10 +91,6 @@ void radeonfb_fillrect(struct fb_info *info, const struct fb_fillrect *region) if(modded.dx + modded.width > vxres) modded.width = vxres - modded.dx; if(modded.dy + modded.height > vyres) modded.height = vyres - modded.dy; - if (info->fix.visual == FB_VISUAL_TRUECOLOR || - info->fix.visual == FB_VISUAL_DIRECTCOLOR ) - modded.color = ((u32 *) (info->pseudo_palette))[region->color]; - radeonfb_prim_fillrect(rinfo, &modded); } @@ -112,22 +109,22 @@ static void radeonfb_prim_copyarea(struct radeonfb_info *rinfo, if ( xdir < 0 ) { sx += w-1; dx += w-1; } if ( ydir < 0 ) { sy += h-1; dy += h-1; } - radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache, - rinfo->dp_gui_mc_base | - GMC_BRUSH_NONE | - GMC_SRC_DATATYPE_COLOR | - ROP3_S | - DP_SRC_SOURCE_MEMORY); - radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache, - (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0) | - (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0)); - -#if FLUSH_CACHE_WORKAROUND - radeon_fifo_wait(rinfo, 2); + radeon_fifo_wait(3); + OUTREG(DP_GUI_MASTER_CNTL, + rinfo->dp_gui_master_cntl /* i.e. GMC_DST_32BPP */ + | GMC_BRUSH_NONE + | GMC_SRC_DSTCOLOR + | ROP3_S + | DP_SRC_SOURCE_MEMORY ); + OUTREG(DP_WRITE_MSK, 0xffffffff); + OUTREG(DP_CNTL, (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0) + | (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0)); + + radeon_fifo_wait(2); OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL); OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE)); -#endif - radeon_fifo_wait(rinfo, 3); + + radeon_fifo_wait(3); OUTREG(SRC_Y_X, (sy << 16) | sx); OUTREG(DST_Y_X, (dy << 16) | dx); OUTREG(DST_HEIGHT_WIDTH, (h << 16) | w); @@ -146,14 +143,15 @@ void radeonfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) modded.width = area->width; modded.height = area->height; - WARN_ON(rinfo->gfx_mode); - if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode) + if (info->state != FBINFO_STATE_RUNNING) return; if (info->flags & FBINFO_HWACCEL_DISABLED) { cfb_copyarea(info, area); return; } + radeon_fixup_offset(rinfo); + vxres = info->var.xres_virtual; vyres = info->var.yres_virtual; @@ -170,112 +168,13 @@ void radeonfb_copyarea(struct fb_info *info, const struct fb_copyarea *area) radeonfb_prim_copyarea(rinfo, &modded); } -static void radeonfb_prim_imageblit(struct radeonfb_info *rinfo, - const struct fb_image *image, - u32 fg, u32 bg) -{ - unsigned int src_bytes, dwords; - u32 *bits; - - radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache, - rinfo->dp_gui_mc_base | - GMC_BRUSH_NONE | - GMC_SRC_DATATYPE_MONO_FG_BG | - ROP3_S | - GMC_BYTE_ORDER_MSB_TO_LSB | - DP_SRC_SOURCE_HOST_DATA); - radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache, - DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM); - radeonfb_set_creg(rinfo, DP_SRC_FRGD_CLR, &rinfo->dp_src_fg_cache, fg); - radeonfb_set_creg(rinfo, DP_SRC_BKGD_CLR, &rinfo->dp_src_bg_cache, bg); - - radeon_fifo_wait(rinfo, 1); - OUTREG(DST_Y_X, (image->dy << 16) | image->dx); - - /* Ensure the dst cache is flushed and the engine idle before - * issuing the operation. - * - * This works around engine lockups on some cards - */ -#if FLUSH_CACHE_WORKAROUND - radeon_fifo_wait(rinfo, 2); - OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL); - OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE)); -#endif - - /* X here pads width to a multiple of 32 and uses the clipper to - * adjust the result. Is that really necessary ? Things seem to - * work ok for me without that and the doco doesn't seem to imply - * there is such a restriction. - */ - OUTREG(DST_WIDTH_HEIGHT, (image->width << 16) | image->height); - - src_bytes = (((image->width * image->depth) + 7) / 8) * image->height; - dwords = (src_bytes + 3) / 4; - bits = (u32*)(image->data); - - while(dwords >= 8) { - radeon_fifo_wait(rinfo, 8); -#if BITS_PER_LONG == 64 - __raw_writeq(*((u64 *)(bits)), rinfo->mmio_base + HOST_DATA0); - __raw_writeq(*((u64 *)(bits+2)), rinfo->mmio_base + HOST_DATA2); - __raw_writeq(*((u64 *)(bits+4)), rinfo->mmio_base + HOST_DATA4); - __raw_writeq(*((u64 *)(bits+6)), rinfo->mmio_base + HOST_DATA6); - bits += 8; -#else - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA1); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA2); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA3); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA4); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA5); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA6); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA7); -#endif - dwords -= 8; - } - while(dwords--) { - radeon_fifo_wait(rinfo, 1); - __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0); - } -} - void radeonfb_imageblit(struct fb_info *info, const struct fb_image *image) { struct radeonfb_info *rinfo = info->par; - u32 fg, bg; - - WARN_ON(rinfo->gfx_mode); - if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode) - return; - if (!image->width || !image->height) + if (info->state != FBINFO_STATE_RUNNING) return; - - /* We only do 1 bpp color expansion for now */ - if (info->flags & FBINFO_HWACCEL_DISABLED || image->depth != 1) - goto fallback; - - /* Fallback if running out of the screen. We may do clipping - * in the future */ - if ((image->dx + image->width) > info->var.xres_virtual || - (image->dy + image->height) > info->var.yres_virtual) - goto fallback; - - if (info->fix.visual == FB_VISUAL_TRUECOLOR || - info->fix.visual == FB_VISUAL_DIRECTCOLOR) { - fg = ((u32*)(info->pseudo_palette))[image->fg_color]; - bg = ((u32*)(info->pseudo_palette))[image->bg_color]; - } else { - fg = image->fg_color; - bg = image->bg_color; - } - - radeonfb_prim_imageblit(rinfo, image, fg, bg); - return; - - fallback: - radeon_engine_idle(rinfo); + radeon_engine_idle(); cfb_imageblit(info, image); } @@ -286,8 +185,7 @@ int radeonfb_sync(struct fb_info *info) if (info->state != FBINFO_STATE_RUNNING) return 0; - - radeon_engine_idle(rinfo); + radeon_engine_idle(); return 0; } @@ -363,10 +261,9 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo) /* disable 3D engine */ OUTREG(RB3D_CNTL, 0); - rinfo->fifo_free = 0; radeonfb_engine_reset(rinfo); - radeon_fifo_wait(rinfo, 1); + radeon_fifo_wait (1); if (IS_R300_VARIANT(rinfo)) { OUTREG(RB2D_DSTCACHE_MODE, INREG(RB2D_DSTCACHE_MODE) | RB2D_DC_AUTOFLUSH_ENABLE | @@ -380,7 +277,7 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo) OUTREG(RB2D_DSTCACHE_MODE, 0); } - radeon_fifo_wait(rinfo, 3); + radeon_fifo_wait (3); /* We re-read MC_FB_LOCATION from card as it can have been * modified by XFree drivers (ouch !) */ @@ -391,57 +288,41 @@ void radeonfb_engine_init (struct radeonfb_info *rinfo) OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10)); OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10)); - radeon_fifo_wait(rinfo, 1); -#ifdef __BIG_ENDIAN + radeon_fifo_wait (1); +#if defined(__BIG_ENDIAN) OUTREGP(DP_DATATYPE, HOST_BIG_ENDIAN_EN, ~HOST_BIG_ENDIAN_EN); #else OUTREGP(DP_DATATYPE, 0, ~HOST_BIG_ENDIAN_EN); #endif - radeon_fifo_wait(rinfo, 2); + radeon_fifo_wait (2); OUTREG(DEFAULT_SC_TOP_LEFT, 0); OUTREG(DEFAULT_SC_BOTTOM_RIGHT, (DEFAULT_SC_RIGHT_MAX | DEFAULT_SC_BOTTOM_MAX)); - /* set default DP_GUI_MASTER_CNTL */ temp = radeon_get_dstbpp(rinfo->depth); - rinfo->dp_gui_mc_base = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS); + rinfo->dp_gui_master_cntl = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS); - rinfo->dp_gui_mc_cache = rinfo->dp_gui_mc_base | - GMC_BRUSH_SOLID_COLOR | - GMC_SRC_DATATYPE_COLOR; - radeon_fifo_wait(rinfo, 1); - OUTREG(DP_GUI_MASTER_CNTL, rinfo->dp_gui_mc_cache); + radeon_fifo_wait (1); + OUTREG(DP_GUI_MASTER_CNTL, (rinfo->dp_gui_master_cntl | + GMC_BRUSH_SOLID_COLOR | + GMC_SRC_DATATYPE_COLOR)); + radeon_fifo_wait (7); /* clear line drawing regs */ - radeon_fifo_wait(rinfo, 2); OUTREG(DST_LINE_START, 0); OUTREG(DST_LINE_END, 0); - /* set brush and source color regs */ - rinfo->dp_brush_fg_cache = 0xffffffff; - rinfo->dp_brush_bg_cache = 0x00000000; - rinfo->dp_src_fg_cache = 0xffffffff; - rinfo->dp_src_bg_cache = 0x00000000; - radeon_fifo_wait(rinfo, 4); - OUTREG(DP_BRUSH_FRGD_CLR, rinfo->dp_brush_fg_cache); - OUTREG(DP_BRUSH_BKGD_CLR, rinfo->dp_brush_bg_cache); - OUTREG(DP_SRC_FRGD_CLR, rinfo->dp_src_fg_cache); - OUTREG(DP_SRC_BKGD_CLR, rinfo->dp_src_bg_cache); - - /* Default direction */ - rinfo->dp_cntl_cache = DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM; - radeon_fifo_wait(rinfo, 1); - OUTREG(DP_CNTL, rinfo->dp_cntl_cache); + /* set brush color regs */ + OUTREG(DP_BRUSH_FRGD_CLR, 0xffffffff); + OUTREG(DP_BRUSH_BKGD_CLR, 0x00000000); + + /* set source color regs */ + OUTREG(DP_SRC_FRGD_CLR, 0xffffffff); + OUTREG(DP_SRC_BKGD_CLR, 0x00000000); /* default write mask */ - radeon_fifo_wait(rinfo, 1); OUTREG(DP_WRITE_MSK, 0xffffffff); - /* Default to no swapping of host data */ - radeon_fifo_wait(rinfo, 1); - OUTREG(RBBM_GUICNTL, RBBM_GUICNTL_HOST_DATA_SWAP_NONE); - - /* Make sure it's settled */ - radeon_engine_idle(rinfo); + radeon_engine_idle (); } diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/aty/radeon_backlight.c index f343ba83f0a..1a056adb61c 100644 --- a/drivers/video/aty/radeon_backlight.c +++ b/drivers/video/aty/radeon_backlight.c @@ -66,7 +66,7 @@ static int radeon_bl_update_status(struct backlight_device *bd) level = bd->props.brightness; del_timer_sync(&rinfo->lvds_timer); - radeon_engine_idle(rinfo); + radeon_engine_idle(); lvds_gen_cntl = INREG(LVDS_GEN_CNTL); if (level > 0) { diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 9a5821c65eb..d0f1a7fc2c9 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -852,6 +852,7 @@ static int radeonfb_pan_display (struct fb_var_screeninfo *var, if (rinfo->asleep) return 0; + radeon_fifo_wait(2); OUTREG(CRTC_OFFSET, ((var->yoffset * var->xres_virtual + var->xoffset) * var->bits_per_pixel / 8) & ~7); return 0; @@ -881,6 +882,7 @@ static int radeonfb_ioctl (struct fb_info *info, unsigned int cmd, if (rc) return rc; + radeon_fifo_wait(2); if (value & 0x01) { tmp = INREG(LVDS_GEN_CNTL); @@ -938,7 +940,7 @@ int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch) if (rinfo->lock_blank) return 0; - radeon_engine_idle(rinfo); + radeon_engine_idle(); val = INREG(CRTC_EXT_CNTL); val &= ~(CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS | @@ -1046,7 +1048,7 @@ static int radeonfb_blank (int blank, struct fb_info *info) if (rinfo->asleep) return 0; - + return radeon_screen_blank(rinfo, blank, 0); } @@ -1072,6 +1074,8 @@ static int radeon_setcolreg (unsigned regno, unsigned red, unsigned green, pindex = regno; if (!rinfo->asleep) { + radeon_fifo_wait(9); + if (rinfo->bpp == 16) { pindex = regno * 8; @@ -1240,6 +1244,8 @@ static void radeon_write_pll_regs(struct radeonfb_info *rinfo, struct radeon_reg { int i; + radeon_fifo_wait(20); + /* Workaround from XFree */ if (rinfo->is_mobility) { /* A temporal workaround for the occational blanking on certain laptop @@ -1335,7 +1341,7 @@ static void radeon_lvds_timer_func(unsigned long data) { struct radeonfb_info *rinfo = (struct radeonfb_info *)data; - radeon_engine_idle(rinfo); + radeon_engine_idle(); OUTREG(LVDS_GEN_CNTL, rinfo->pending_lvds_gen_cntl); } @@ -1353,11 +1359,10 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode, if (nomodeset) return; - radeon_engine_idle(rinfo); - if (!regs_only) radeon_screen_blank(rinfo, FB_BLANK_NORMAL, 0); + radeon_fifo_wait(31); for (i=0; i<10; i++) OUTREG(common_regs[i].reg, common_regs[i].val); @@ -1385,6 +1390,7 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode, radeon_write_pll_regs(rinfo, mode); if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) { + radeon_fifo_wait(10); OUTREG(FP_CRTC_H_TOTAL_DISP, mode->fp_crtc_h_total_disp); OUTREG(FP_CRTC_V_TOTAL_DISP, mode->fp_crtc_v_total_disp); OUTREG(FP_H_SYNC_STRT_WID, mode->fp_h_sync_strt_wid); @@ -1399,6 +1405,7 @@ void radeon_write_mode (struct radeonfb_info *rinfo, struct radeon_regs *mode, if (!regs_only) radeon_screen_blank(rinfo, FB_BLANK_UNBLANK, 0); + radeon_fifo_wait(2); OUTPLL(VCLK_ECP_CNTL, mode->vclk_ecp_cntl); return; @@ -1549,7 +1556,7 @@ static int radeonfb_set_par(struct fb_info *info) /* We always want engine to be idle on a mode switch, even * if we won't actually change the mode */ - radeon_engine_idle(rinfo); + radeon_engine_idle(); hSyncStart = mode->xres + mode->right_margin; hSyncEnd = hSyncStart + mode->hsync_len; @@ -1844,6 +1851,7 @@ static int radeonfb_set_par(struct fb_info *info) return 0; } + static struct fb_ops radeonfb_ops = { .owner = THIS_MODULE, .fb_check_var = radeonfb_check_var, @@ -1867,7 +1875,6 @@ static int __devinit radeon_set_fbinfo (struct radeonfb_info *rinfo) info->par = rinfo; info->pseudo_palette = rinfo->pseudo_palette; info->flags = FBINFO_DEFAULT - | FBINFO_HWACCEL_IMAGEBLIT | FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT | FBINFO_HWACCEL_XPAN @@ -1999,6 +2006,7 @@ static void radeon_identify_vram(struct radeonfb_info *rinfo) u32 tom = INREG(NB_TOM); tmp = ((((tom >> 16) - (tom & 0xffff) + 1) << 6) * 1024); + radeon_fifo_wait(6); OUTREG(MC_FB_LOCATION, tom); OUTREG(DISPLAY_BASE_ADDR, (tom & 0xffff) << 16); OUTREG(CRTC2_DISPLAY_BASE_ADDR, (tom & 0xffff) << 16); diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c index 3df5015f1d1..675abdafc2d 100644 --- a/drivers/video/aty/radeon_pm.c +++ b/drivers/video/aty/radeon_pm.c @@ -2653,9 +2653,9 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg) if (!(info->flags & FBINFO_HWACCEL_DISABLED)) { /* Make sure engine is reset */ - radeon_engine_idle(rinfo); + radeon_engine_idle(); radeonfb_engine_reset(rinfo); - radeon_engine_idle(rinfo); + radeon_engine_idle(); } /* Blank display and LCD */ @@ -2767,7 +2767,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev) rinfo->asleep = 0; } else - radeon_engine_idle(rinfo); + radeon_engine_idle(); /* Restore display & engine */ radeon_write_mode (rinfo, &rinfo->state, 1); diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h index ea0b5b47aca..3ea1b00fdd2 100644 --- a/drivers/video/aty/radeonfb.h +++ b/drivers/video/aty/radeonfb.h @@ -336,15 +336,7 @@ struct radeonfb_info { int mon2_type; u8 *mon2_EDID; - /* accel bits */ - u32 dp_gui_mc_base; - u32 dp_gui_mc_cache; - u32 dp_cntl_cache; - u32 dp_brush_fg_cache; - u32 dp_brush_bg_cache; - u32 dp_src_fg_cache; - u32 dp_src_bg_cache; - u32 fifo_free; + u32 dp_gui_master_cntl; struct pll_info pll; @@ -356,7 +348,6 @@ struct radeonfb_info { int lock_blank; int dynclk; int no_schedule; - int gfx_mode; enum radeon_pm_mode pm_mode; reinit_function_ptr reinit_func; @@ -401,14 +392,8 @@ static inline void _radeon_msleep(struct radeonfb_info *rinfo, unsigned long ms) #define OUTREG8(addr,val) writeb(val, (rinfo->mmio_base)+addr) #define INREG16(addr) readw((rinfo->mmio_base)+addr) #define OUTREG16(addr,val) writew(val, (rinfo->mmio_base)+addr) - -#ifdef CONFIG_PPC -#define INREG(addr) ({ eieio(); ld_le32(rinfo->mmio_base+(addr)); }) -#define OUTREG(addr,val) do { eieio(); st_le32(rinfo->mmio_base+(addr),(val)); } while(0) -#else #define INREG(addr) readl((rinfo->mmio_base)+addr) #define OUTREG(addr,val) writel(val, (rinfo->mmio_base)+addr) -#endif static inline void _OUTREGP(struct radeonfb_info *rinfo, u32 addr, u32 val, u32 mask) @@ -550,7 +535,17 @@ static inline u32 radeon_get_dstbpp(u16 depth) * 2D Engine helper routines */ -extern void radeon_fifo_update_and_wait(struct radeonfb_info *rinfo, int entries); +static inline void _radeon_fifo_wait(struct radeonfb_info *rinfo, int entries) +{ + int i; + + for (i=0; i<2000000; i++) { + if ((INREG(RBBM_STATUS) & 0x7f) >= entries) + return; + udelay(1); + } + printk(KERN_ERR "radeonfb: FIFO Timeout !\n"); +} static inline void radeon_engine_flush (struct radeonfb_info *rinfo) { @@ -563,7 +558,7 @@ static inline void radeon_engine_flush (struct radeonfb_info *rinfo) /* Ensure FIFO is empty, ie, make sure the flush commands * has reached the cache */ - radeon_fifo_update_and_wait(rinfo, 64); + _radeon_fifo_wait (rinfo, 64); /* Wait for the flush to complete */ for (i=0; i < 2000000; i++) { @@ -575,12 +570,12 @@ static inline void radeon_engine_flush (struct radeonfb_info *rinfo) } -static inline void radeon_engine_idle(struct radeonfb_info *rinfo) +static inline void _radeon_engine_idle(struct radeonfb_info *rinfo) { int i; /* ensure FIFO is empty before waiting for idle */ - radeon_fifo_update_and_wait (rinfo, 64); + _radeon_fifo_wait (rinfo, 64); for (i=0; i<2000000; i++) { if (((INREG(RBBM_STATUS) & GUI_ACTIVE)) == 0) { @@ -593,6 +588,8 @@ static inline void radeon_engine_idle(struct radeonfb_info *rinfo) } +#define radeon_engine_idle() _radeon_engine_idle(rinfo) +#define radeon_fifo_wait(entries) _radeon_fifo_wait(rinfo,entries) #define radeon_msleep(ms) _radeon_msleep(rinfo,ms) @@ -622,7 +619,6 @@ extern void radeonfb_imageblit(struct fb_info *p, const struct fb_image *image); extern int radeonfb_sync(struct fb_info *info); extern void radeonfb_engine_init (struct radeonfb_info *rinfo); extern void radeonfb_engine_reset(struct radeonfb_info *rinfo); -extern void radeon_fixup_mem_offset(struct radeonfb_info *rinfo); /* Other functions */ extern int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch); diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index b92947d62ad..0b2adefe9e3 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2389,16 +2389,13 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch) if (!fbcon_is_inactive(vc, info)) { if (ops->blank_state != blank) { - int ret = 1; - ops->blank_state = blank; fbcon_cursor(vc, blank ? CM_ERASE : CM_DRAW); ops->cursor_flash = (!blank); - if (info->fbops->fb_blank) - ret = info->fbops->fb_blank(blank, info); - if (ret) - fbcon_generic_blank(vc, info, blank); + if (!(info->flags & FBINFO_MISC_USEREVENT)) + if (fb_blank(info, blank)) + fbcon_generic_blank(vc, info, blank); } if (!blank) @@ -3534,12 +3531,18 @@ static void fbcon_exit(void) softback_buf = 0UL; for (i = 0; i < FB_MAX; i++) { + int pending; + mapped = 0; info = registered_fb[i]; if (info == NULL) continue; + pending = cancel_work_sync(&info->queue); + DPRINTK("fbcon: %s pending work\n", (pending ? "canceled" : + "no")); + for (j = first_fb_vc; j <= last_fb_vc; j++) { if (con2fb_map[j] == i) mapped = 1; diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index ccd986140c9..d58c68cd456 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c @@ -1,6 +1,4 @@ /* - * linux/drivers/video/imxfb.c - * * Freescale i.MX Frame Buffer device driver * * Copyright (C) 2004 Sascha Hauer, Pengutronix @@ -16,7 +14,6 @@ * linux-arm-kernel@lists.arm.linux.org.uk */ -//#define DEBUG 1 #include <linux/module.h> #include <linux/kernel.h> @@ -32,9 +29,8 @@ #include <linux/cpufreq.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/io.h> -#include <mach/hardware.h> -#include <asm/io.h> #include <mach/imxfb.h> /* @@ -42,23 +38,150 @@ */ #define DEBUG_VAR 1 -#include "imxfb.h" +#define DRIVER_NAME "imx-fb" + +#define LCDC_SSA 0x00 + +#define LCDC_SIZE 0x04 +#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20) +#define SIZE_YMAX(y) ((y) & 0x1ff) + +#define LCDC_VPW 0x08 +#define VPW_VPW(x) ((x) & 0x3ff) + +#define LCDC_CPOS 0x0C +#define CPOS_CC1 (1<<31) +#define CPOS_CC0 (1<<30) +#define CPOS_OP (1<<28) +#define CPOS_CXP(x) (((x) & 3ff) << 16) +#define CPOS_CYP(y) ((y) & 0x1ff) + +#define LCDC_LCWHB 0x10 +#define LCWHB_BK_EN (1<<31) +#define LCWHB_CW(w) (((w) & 0x1f) << 24) +#define LCWHB_CH(h) (((h) & 0x1f) << 16) +#define LCWHB_BD(x) ((x) & 0xff) + +#define LCDC_LCHCC 0x14 +#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11) +#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5) +#define LCHCC_CUR_COL_B(b) ((b) & 0x1f) + +#define LCDC_PCR 0x18 + +#define LCDC_HCR 0x1C +#define HCR_H_WIDTH(x) (((x) & 0x3f) << 26) +#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8) +#define HCR_H_WAIT_2(x) ((x) & 0xff) + +#define LCDC_VCR 0x20 +#define VCR_V_WIDTH(x) (((x) & 0x3f) << 26) +#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8) +#define VCR_V_WAIT_2(x) ((x) & 0xff) + +#define LCDC_POS 0x24 +#define POS_POS(x) ((x) & 1f) + +#define LCDC_LSCR1 0x28 +/* bit fields in imxfb.h */ + +#define LCDC_PWMR 0x2C +/* bit fields in imxfb.h */ + +#define LCDC_DMACR 0x30 +/* bit fields in imxfb.h */ + +#define LCDC_RMCR 0x34 +#define RMCR_LCDC_EN (1<<1) +#define RMCR_SELF_REF (1<<0) + +#define LCDC_LCDICR 0x38 +#define LCDICR_INT_SYN (1<<2) +#define LCDICR_INT_CON (1) + +#define LCDC_LCDISR 0x40 +#define LCDISR_UDR_ERR (1<<3) +#define LCDISR_ERR_RES (1<<2) +#define LCDISR_EOF (1<<1) +#define LCDISR_BOF (1<<0) + +/* + * These are the bitfields for each + * display depth that we support. + */ +struct imxfb_rgb { + struct fb_bitfield red; + struct fb_bitfield green; + struct fb_bitfield blue; + struct fb_bitfield transp; +}; + +struct imxfb_info { + struct platform_device *pdev; + void __iomem *regs; -static struct imxfb_rgb def_rgb_16 = { - .red = { .offset = 8, .length = 4, }, - .green = { .offset = 4, .length = 4, }, - .blue = { .offset = 0, .length = 4, }, - .transp = { .offset = 0, .length = 0, }, + u_int max_bpp; + u_int max_xres; + u_int max_yres; + + /* + * These are the addresses we mapped + * the framebuffer memory region to. + */ + dma_addr_t map_dma; + u_char *map_cpu; + u_int map_size; + + u_char *screen_cpu; + dma_addr_t screen_dma; + u_int palette_size; + + dma_addr_t dbar1; + dma_addr_t dbar2; + + u_int pcr; + u_int pwmr; + u_int lscr1; + u_int dmacr; + u_int cmap_inverse:1, + cmap_static:1, + unused:30; + + void (*lcd_power)(int); + void (*backlight_power)(int); +}; + +#define IMX_NAME "IMX" + +/* + * Minimum X and Y resolutions + */ +#define MIN_XRES 64 +#define MIN_YRES 64 + +static struct imxfb_rgb def_rgb_16_tft = { + .red = {.offset = 11, .length = 5,}, + .green = {.offset = 5, .length = 6,}, + .blue = {.offset = 0, .length = 5,}, + .transp = {.offset = 0, .length = 0,}, +}; + +static struct imxfb_rgb def_rgb_16_stn = { + .red = {.offset = 8, .length = 4,}, + .green = {.offset = 4, .length = 4,}, + .blue = {.offset = 0, .length = 4,}, + .transp = {.offset = 0, .length = 0,}, }; static struct imxfb_rgb def_rgb_8 = { - .red = { .offset = 0, .length = 8, }, - .green = { .offset = 0, .length = 8, }, - .blue = { .offset = 0, .length = 8, }, - .transp = { .offset = 0, .length = 0, }, + .red = {.offset = 0, .length = 8,}, + .green = {.offset = 0, .length = 8,}, + .blue = {.offset = 0, .length = 8,}, + .transp = {.offset = 0, .length = 0,}, }; -static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info); +static int imxfb_activate_var(struct fb_var_screeninfo *var, + struct fb_info *info); static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf) { @@ -67,10 +190,8 @@ static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf) return chan << bf->offset; } -#define LCDC_PALETTE(x) __REG2(IMX_LCDC_BASE+0x800, (x)<<2) -static int -imxfb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue, - u_int trans, struct fb_info *info) +static int imxfb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue, + u_int trans, struct fb_info *info) { struct imxfb_info *fbi = info->par; u_int val, ret = 1; @@ -81,14 +202,13 @@ imxfb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue, (CNVT_TOHW(green,4) << 4) | CNVT_TOHW(blue, 4); - LCDC_PALETTE(regno) = val; + writel(val, fbi->regs + 0x800 + (regno << 2)); ret = 0; } return ret; } -static int -imxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, +static int imxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int trans, struct fb_info *info) { struct imxfb_info *fbi = info->par; @@ -148,11 +268,10 @@ imxfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, * yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale, * bitfields, horizontal timing, vertical timing. */ -static int -imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) +static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { struct imxfb_info *fbi = info->par; - int rgbidx; + struct imxfb_rgb *rgb; if (var->xres < MIN_XRES) var->xres = MIN_XRES; @@ -168,23 +287,25 @@ imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel); switch (var->bits_per_pixel) { case 16: - rgbidx = RGB_16; + default: + if (readl(fbi->regs + LCDC_PCR) & PCR_TFT) + rgb = &def_rgb_16_tft; + else + rgb = &def_rgb_16_stn; break; case 8: - rgbidx = RGB_8; + rgb = &def_rgb_8; break; - default: - rgbidx = RGB_16; } /* * Copy the RGB parameters for this display * from the machine specific parameters. */ - var->red = fbi->rgb[rgbidx]->red; - var->green = fbi->rgb[rgbidx]->green; - var->blue = fbi->rgb[rgbidx]->blue; - var->transp = fbi->rgb[rgbidx]->transp; + var->red = rgb->red; + var->green = rgb->green; + var->blue = rgb->blue; + var->transp = rgb->transp; pr_debug("RGBT length = %d:%d:%d:%d\n", var->red.length, var->green.length, var->blue.length, @@ -221,8 +342,7 @@ static int imxfb_set_par(struct fb_info *info) info->fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR; } - info->fix.line_length = var->xres_virtual * - var->bits_per_pixel / 8; + info->fix.line_length = var->xres_virtual * var->bits_per_pixel / 8; fbi->palette_size = var->bits_per_pixel == 8 ? 256 : 16; imxfb_activate_var(var, info); @@ -235,22 +355,27 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) pr_debug("Enabling LCD controller\n"); /* initialize LCDC */ - LCDC_RMCR &= ~RMCR_LCDC_EN; /* just to be safe... */ + writel(readl(fbi->regs + LCDC_RMCR) & ~RMCR_LCDC_EN, + fbi->regs + LCDC_RMCR); /* just to be safe... */ + + writel(fbi->screen_dma, fbi->regs + LCDC_SSA); - LCDC_SSA = fbi->screen_dma; /* physical screen start address */ - LCDC_VPW = VPW_VPW(fbi->max_xres * fbi->max_bpp / 8 / 4); + writel(VPW_VPW(fbi->max_xres * fbi->max_bpp / 8 / 4), + fbi->regs + LCDC_VPW); - LCDC_POS = 0x00000000; /* panning offset 0 (0 pixel offset) */ + /* panning offset 0 (0 pixel offset) */ + writel(0x00000000, fbi->regs + LCDC_POS); /* disable hardware cursor */ - LCDC_CPOS &= ~(CPOS_CC0 | CPOS_CC1); + writel(readl(fbi->regs + LCDC_CPOS) & ~(CPOS_CC0 | CPOS_CC1), + fbi->regs + LCDC_CPOS); - LCDC_RMCR = RMCR_LCDC_EN; + writel(RMCR_LCDC_EN, fbi->regs + LCDC_RMCR); - if(fbi->backlight_power) + if (fbi->backlight_power) fbi->backlight_power(1); - if(fbi->lcd_power) + if (fbi->lcd_power) fbi->lcd_power(1); } @@ -258,12 +383,12 @@ static void imxfb_disable_controller(struct imxfb_info *fbi) { pr_debug("Disabling LCD controller\n"); - if(fbi->backlight_power) + if (fbi->backlight_power) fbi->backlight_power(0); - if(fbi->lcd_power) + if (fbi->lcd_power) fbi->lcd_power(0); - LCDC_RMCR = 0; + writel(0, fbi->regs + LCDC_RMCR); } static int imxfb_blank(int blank, struct fb_info *info) @@ -340,74 +465,26 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf info->fix.id, var->lower_margin); #endif - LCDC_HCR = HCR_H_WIDTH(var->hsync_len) | - HCR_H_WAIT_1(var->left_margin) | - HCR_H_WAIT_2(var->right_margin); + writel(HCR_H_WIDTH(var->hsync_len) | + HCR_H_WAIT_1(var->right_margin) | + HCR_H_WAIT_2(var->left_margin), + fbi->regs + LCDC_HCR); - LCDC_VCR = VCR_V_WIDTH(var->vsync_len) | - VCR_V_WAIT_1(var->upper_margin) | - VCR_V_WAIT_2(var->lower_margin); + writel(VCR_V_WIDTH(var->vsync_len) | + VCR_V_WAIT_1(var->lower_margin) | + VCR_V_WAIT_2(var->upper_margin), + fbi->regs + LCDC_VCR); - LCDC_SIZE = SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres); - LCDC_PCR = fbi->pcr; - LCDC_PWMR = fbi->pwmr; - LCDC_LSCR1 = fbi->lscr1; - LCDC_DMACR = fbi->dmacr; + writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres), + fbi->regs + LCDC_SIZE); + writel(fbi->pcr, fbi->regs + LCDC_PCR); + writel(fbi->pwmr, fbi->regs + LCDC_PWMR); + writel(fbi->lscr1, fbi->regs + LCDC_LSCR1); + writel(fbi->dmacr, fbi->regs + LCDC_DMACR); return 0; } -static void imxfb_setup_gpio(struct imxfb_info *fbi) -{ - int width; - - LCDC_RMCR &= ~(RMCR_LCDC_EN | RMCR_SELF_REF); - - if( fbi->pcr & PCR_TFT ) - width = 16; - else - width = 1 << ((fbi->pcr >> 28) & 0x3); - - switch(width) { - case 16: - imx_gpio_mode(PD30_PF_LD15); - imx_gpio_mode(PD29_PF_LD14); - imx_gpio_mode(PD28_PF_LD13); - imx_gpio_mode(PD27_PF_LD12); - imx_gpio_mode(PD26_PF_LD11); - imx_gpio_mode(PD25_PF_LD10); - imx_gpio_mode(PD24_PF_LD9); - imx_gpio_mode(PD23_PF_LD8); - case 8: - imx_gpio_mode(PD22_PF_LD7); - imx_gpio_mode(PD21_PF_LD6); - imx_gpio_mode(PD20_PF_LD5); - imx_gpio_mode(PD19_PF_LD4); - case 4: - imx_gpio_mode(PD18_PF_LD3); - imx_gpio_mode(PD17_PF_LD2); - case 2: - imx_gpio_mode(PD16_PF_LD1); - case 1: - imx_gpio_mode(PD15_PF_LD0); - } - - /* initialize GPIOs */ - imx_gpio_mode(PD6_PF_LSCLK); - imx_gpio_mode(PD11_PF_CONTRAST); - imx_gpio_mode(PD14_PF_FLM_VSYNC); - imx_gpio_mode(PD13_PF_LP_HSYNC); - imx_gpio_mode(PD12_PF_ACD_OE); - - /* These are only needed for Sharp HR TFT displays */ - if (fbi->pcr & PCR_SHARP) { - imx_gpio_mode(PD7_PF_REV); - imx_gpio_mode(PD8_PF_CLS); - imx_gpio_mode(PD9_PF_PS); - imx_gpio_mode(PD10_PF_SPL_SPR); - } -} - #ifdef CONFIG_PM /* * Power management hooks. Note that we won't be called from IRQ context, @@ -416,7 +493,8 @@ static void imxfb_setup_gpio(struct imxfb_info *fbi) static int imxfb_suspend(struct platform_device *dev, pm_message_t state) { struct imxfb_info *fbi = platform_get_drvdata(dev); - pr_debug("%s\n",__func__); + + pr_debug("%s\n", __func__); imxfb_disable_controller(fbi); return 0; @@ -425,7 +503,8 @@ static int imxfb_suspend(struct platform_device *dev, pm_message_t state) static int imxfb_resume(struct platform_device *dev) { struct imxfb_info *fbi = platform_get_drvdata(dev); - pr_debug("%s\n",__func__); + + pr_debug("%s\n", __func__); imxfb_enable_controller(fbi); return 0; @@ -435,149 +514,136 @@ static int imxfb_resume(struct platform_device *dev) #define imxfb_resume NULL #endif -static int __init imxfb_init_fbinfo(struct device *dev) +static int __init imxfb_init_fbinfo(struct platform_device *pdev) { - struct imxfb_mach_info *inf = dev->platform_data; - struct fb_info *info = dev_get_drvdata(dev); + struct imx_fb_platform_data *pdata = pdev->dev.platform_data; + struct fb_info *info = dev_get_drvdata(&pdev->dev); struct imxfb_info *fbi = info->par; pr_debug("%s\n",__func__); - info->pseudo_palette = kmalloc( sizeof(u32) * 16, GFP_KERNEL); + info->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL); if (!info->pseudo_palette) return -ENOMEM; memset(fbi, 0, sizeof(struct imxfb_info)); - fbi->dev = dev; strlcpy(info->fix.id, IMX_NAME, sizeof(info->fix.id)); - info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.type = FB_TYPE_PACKED_PIXELS; info->fix.type_aux = 0; info->fix.xpanstep = 0; info->fix.ypanstep = 0; info->fix.ywrapstep = 0; - info->fix.accel = FB_ACCEL_NONE; + info->fix.accel = FB_ACCEL_NONE; info->var.nonstd = 0; info->var.activate = FB_ACTIVATE_NOW; info->var.height = -1; info->var.width = -1; info->var.accel_flags = 0; - info->var.vmode = FB_VMODE_NONINTERLACED; + info->var.vmode = FB_VMODE_NONINTERLACED; info->fbops = &imxfb_ops; - info->flags = FBINFO_FLAG_DEFAULT | FBINFO_READS_FAST; - - fbi->rgb[RGB_16] = &def_rgb_16; - fbi->rgb[RGB_8] = &def_rgb_8; - - fbi->max_xres = inf->xres; - info->var.xres = inf->xres; - info->var.xres_virtual = inf->xres; - fbi->max_yres = inf->yres; - info->var.yres = inf->yres; - info->var.yres_virtual = inf->yres; - fbi->max_bpp = inf->bpp; - info->var.bits_per_pixel = inf->bpp; - info->var.nonstd = inf->nonstd; - info->var.pixclock = inf->pixclock; - info->var.hsync_len = inf->hsync_len; - info->var.left_margin = inf->left_margin; - info->var.right_margin = inf->right_margin; - info->var.vsync_len = inf->vsync_len; - info->var.upper_margin = inf->upper_margin; - info->var.lower_margin = inf->lower_margin; - info->var.sync = inf->sync; - info->var.grayscale = inf->cmap_greyscale; - fbi->cmap_inverse = inf->cmap_inverse; - fbi->cmap_static = inf->cmap_static; - fbi->pcr = inf->pcr; - fbi->lscr1 = inf->lscr1; - fbi->dmacr = inf->dmacr; - fbi->pwmr = inf->pwmr; - fbi->lcd_power = inf->lcd_power; - fbi->backlight_power = inf->backlight_power; + info->flags = FBINFO_FLAG_DEFAULT | + FBINFO_READS_FAST; + + fbi->max_xres = pdata->xres; + info->var.xres = pdata->xres; + info->var.xres_virtual = pdata->xres; + fbi->max_yres = pdata->yres; + info->var.yres = pdata->yres; + info->var.yres_virtual = pdata->yres; + fbi->max_bpp = pdata->bpp; + info->var.bits_per_pixel = pdata->bpp; + info->var.nonstd = pdata->nonstd; + info->var.pixclock = pdata->pixclock; + info->var.hsync_len = pdata->hsync_len; + info->var.left_margin = pdata->left_margin; + info->var.right_margin = pdata->right_margin; + info->var.vsync_len = pdata->vsync_len; + info->var.upper_margin = pdata->upper_margin; + info->var.lower_margin = pdata->lower_margin; + info->var.sync = pdata->sync; + info->var.grayscale = pdata->cmap_greyscale; + fbi->cmap_inverse = pdata->cmap_inverse; + fbi->cmap_static = pdata->cmap_static; + fbi->pcr = pdata->pcr; + fbi->lscr1 = pdata->lscr1; + fbi->dmacr = pdata->dmacr; + fbi->pwmr = pdata->pwmr; + fbi->lcd_power = pdata->lcd_power; + fbi->backlight_power = pdata->backlight_power; info->fix.smem_len = fbi->max_xres * fbi->max_yres * fbi->max_bpp / 8; return 0; } -/* - * Allocates the DRAM memory for the frame buffer. This buffer is - * remapped into a non-cached, non-buffered, memory region to - * allow pixel writes to occur without flushing the cache. - * Once this area is remapped, all virtual memory access to the - * video memory should occur at the new region. - */ -static int __init imxfb_map_video_memory(struct fb_info *info) -{ - struct imxfb_info *fbi = info->par; - - fbi->map_size = PAGE_ALIGN(info->fix.smem_len); - fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size, - &fbi->map_dma,GFP_KERNEL); - - if (fbi->map_cpu) { - info->screen_base = fbi->map_cpu; - fbi->screen_cpu = fbi->map_cpu; - fbi->screen_dma = fbi->map_dma; - info->fix.smem_start = fbi->screen_dma; - } - - return fbi->map_cpu ? 0 : -ENOMEM; -} - static int __init imxfb_probe(struct platform_device *pdev) { struct imxfb_info *fbi; struct fb_info *info; - struct imxfb_mach_info *inf; + struct imx_fb_platform_data *pdata; struct resource *res; int ret; printk("i.MX Framebuffer driver\n"); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if(!res) + if (!res) return -ENODEV; - inf = pdev->dev.platform_data; - if(!inf) { + pdata = pdev->dev.platform_data; + if (!pdata) { dev_err(&pdev->dev,"No platform_data available\n"); return -ENOMEM; } info = framebuffer_alloc(sizeof(struct imxfb_info), &pdev->dev); - if(!info) + if (!info) return -ENOMEM; fbi = info->par; platform_set_drvdata(pdev, info); - ret = imxfb_init_fbinfo(&pdev->dev); - if( ret < 0 ) + ret = imxfb_init_fbinfo(pdev); + if (ret < 0) goto failed_init; - res = request_mem_region(res->start, res->end - res->start + 1, "IMXFB"); + res = request_mem_region(res->start, resource_size(res), + DRIVER_NAME); if (!res) { ret = -EBUSY; - goto failed_regs; + goto failed_req; + } + + fbi->regs = ioremap(res->start, resource_size(res)); + if (fbi->regs == NULL) { + printk(KERN_ERR"Cannot map frame buffer registers\n"); + goto failed_ioremap; } - if (!inf->fixed_screen_cpu) { - ret = imxfb_map_video_memory(info); - if (ret) { + if (!pdata->fixed_screen_cpu) { + fbi->map_size = PAGE_ALIGN(info->fix.smem_len); + fbi->map_cpu = dma_alloc_writecombine(&pdev->dev, + fbi->map_size, &fbi->map_dma, GFP_KERNEL); + + if (!fbi->map_cpu) { dev_err(&pdev->dev, "Failed to allocate video RAM: %d\n", ret); ret = -ENOMEM; goto failed_map; } + + info->screen_base = fbi->map_cpu; + fbi->screen_cpu = fbi->map_cpu; + fbi->screen_dma = fbi->map_dma; + info->fix.smem_start = fbi->screen_dma; } else { /* Fixed framebuffer mapping enables location of the screen in eSRAM */ - fbi->map_cpu = inf->fixed_screen_cpu; - fbi->map_dma = inf->fixed_screen_dma; + fbi->map_cpu = pdata->fixed_screen_cpu; + fbi->map_dma = pdata->fixed_screen_dma; info->screen_base = fbi->map_cpu; fbi->screen_cpu = fbi->map_cpu; fbi->screen_dma = fbi->map_dma; @@ -590,12 +656,10 @@ static int __init imxfb_probe(struct platform_device *pdev) */ imxfb_check_var(&info->var, info); - ret = fb_alloc_cmap(&info->cmap, 1<<info->var.bits_per_pixel, 0); + ret = fb_alloc_cmap(&info->cmap, 1 << info->var.bits_per_pixel, 0); if (ret < 0) goto failed_cmap; - imxfb_setup_gpio(fbi); - imxfb_set_par(info); ret = register_framebuffer(info); if (ret < 0) { @@ -610,20 +674,22 @@ static int __init imxfb_probe(struct platform_device *pdev) failed_register: fb_dealloc_cmap(&info->cmap); failed_cmap: - if (!inf->fixed_screen_cpu) + if (!pdata->fixed_screen_cpu) dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu, - fbi->map_dma); + fbi->map_dma); failed_map: - kfree(info->pseudo_palette); -failed_regs: + iounmap(fbi->regs); +failed_ioremap: release_mem_region(res->start, res->end - res->start); +failed_req: + kfree(info->pseudo_palette); failed_init: platform_set_drvdata(pdev, NULL); framebuffer_release(info); return ret; } -static int imxfb_remove(struct platform_device *pdev) +static int __devexit imxfb_remove(struct platform_device *pdev) { struct fb_info *info = platform_get_drvdata(pdev); struct imxfb_info *fbi = info->par; @@ -639,6 +705,7 @@ static int imxfb_remove(struct platform_device *pdev) kfree(info->pseudo_palette); framebuffer_release(info); + iounmap(fbi->regs); release_mem_region(res->start, res->end - res->start + 1); platform_set_drvdata(pdev, NULL); @@ -653,19 +720,18 @@ void imxfb_shutdown(struct platform_device * dev) } static struct platform_driver imxfb_driver = { - .probe = imxfb_probe, .suspend = imxfb_suspend, .resume = imxfb_resume, - .remove = imxfb_remove, + .remove = __devexit_p(imxfb_remove), .shutdown = imxfb_shutdown, .driver = { - .name = "imx-fb", + .name = DRIVER_NAME, }, }; int __init imxfb_init(void) { - return platform_driver_register(&imxfb_driver); + return platform_driver_probe(&imxfb_driver, imxfb_probe); } static void __exit imxfb_cleanup(void) diff --git a/drivers/video/imxfb.h b/drivers/video/imxfb.h deleted file mode 100644 index e837a8b48eb..00000000000 --- a/drivers/video/imxfb.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * linux/drivers/video/imxfb.h - * - * Freescale i.MX Frame Buffer device driver - * - * Copyright (C) 2004 S.Hauer, Pengutronix - * - * Copyright (C) 1999 Eric A. Thomas - * Based on acornfb.c Copyright (C) Russell King. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -/* - * These are the bitfields for each - * display depth that we support. - */ -struct imxfb_rgb { - struct fb_bitfield red; - struct fb_bitfield green; - struct fb_bitfield blue; - struct fb_bitfield transp; -}; - -#define RGB_16 (0) -#define RGB_8 (1) -#define NR_RGB 2 - -struct imxfb_info { - struct device *dev; - struct imxfb_rgb *rgb[NR_RGB]; - - u_int max_bpp; - u_int max_xres; - u_int max_yres; - - /* - * These are the addresses we mapped - * the framebuffer memory region to. - */ - dma_addr_t map_dma; - u_char * map_cpu; - u_int map_size; - - u_char * screen_cpu; - dma_addr_t screen_dma; - u_int palette_size; - - dma_addr_t dbar1; - dma_addr_t dbar2; - - u_int pcr; - u_int pwmr; - u_int lscr1; - u_int dmacr; - u_int cmap_inverse:1, - cmap_static:1, - unused:30; - - void (*lcd_power)(int); - void (*backlight_power)(int); -}; - -#define IMX_NAME "IMX" - -/* - * Minimum X and Y resolutions - */ -#define MIN_XRES 64 -#define MIN_YRES 64 - diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c index b790ddff76f..ee380d5f341 100644 --- a/drivers/video/macfb.c +++ b/drivers/video/macfb.c @@ -164,7 +164,6 @@ static struct fb_var_screeninfo macfb_defined = { }; static struct fb_fix_screeninfo macfb_fix = { - .id = "Macintosh ", .type = FB_TYPE_PACKED_PIXELS, .accel = FB_ACCEL_NONE, }; @@ -760,22 +759,22 @@ static int __init macfb_init(void) switch(ndev->dr_hw) { case NUBUS_DRHW_APPLE_MDC: - strcat( macfb_fix.id, "Display Card" ); + strcpy(macfb_fix.id, "Mac Disp. Card"); macfb_setpalette = mdc_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; break; case NUBUS_DRHW_APPLE_TFB: - strcat( macfb_fix.id, "Toby" ); + strcpy(macfb_fix.id, "Toby"); macfb_setpalette = toby_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; break; case NUBUS_DRHW_APPLE_JET: - strcat( macfb_fix.id, "Jet"); + strcpy(macfb_fix.id, "Jet"); macfb_setpalette = jet_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; break; default: - strcat( macfb_fix.id, "Generic NuBus" ); + strcpy(macfb_fix.id, "Generic NuBus"); break; } } @@ -786,21 +785,11 @@ static int __init macfb_init(void) if (!video_is_nubus) switch( mac_bi_data.id ) { - /* These don't have onboard video. Eventually, we may - be able to write separate framebuffer drivers for - them (tobyfb.c, hiresfb.c, etc, etc) */ - case MAC_MODEL_II: - case MAC_MODEL_IIX: - case MAC_MODEL_IICX: - case MAC_MODEL_IIFX: - strcat( macfb_fix.id, "Generic NuBus" ); - break; - /* Valkyrie Quadras */ case MAC_MODEL_Q630: /* I'm not sure about this one */ case MAC_MODEL_P588: - strcat( macfb_fix.id, "Valkyrie built-in" ); + strcpy(macfb_fix.id, "Valkyrie"); macfb_setpalette = valkyrie_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; valkyrie_cmap_regs = ioremap(DAC_BASE, 0x1000); @@ -823,7 +812,7 @@ static int __init macfb_init(void) case MAC_MODEL_Q700: case MAC_MODEL_Q900: case MAC_MODEL_Q950: - strcat( macfb_fix.id, "DAFB built-in" ); + strcpy(macfb_fix.id, "DAFB"); macfb_setpalette = dafb_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; dafb_cmap_regs = ioremap(DAFB_BASE, 0x1000); @@ -831,7 +820,7 @@ static int __init macfb_init(void) /* LC II uses the V8 framebuffer */ case MAC_MODEL_LCII: - strcat( macfb_fix.id, "V8 built-in" ); + strcpy(macfb_fix.id, "V8"); macfb_setpalette = v8_brazil_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); @@ -843,7 +832,7 @@ static int __init macfb_init(void) case MAC_MODEL_IIVI: case MAC_MODEL_IIVX: case MAC_MODEL_P600: - strcat( macfb_fix.id, "Brazil built-in" ); + strcpy(macfb_fix.id, "Brazil"); macfb_setpalette = v8_brazil_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); @@ -860,7 +849,7 @@ static int __init macfb_init(void) case MAC_MODEL_P460: macfb_setpalette = v8_brazil_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "Sonora built-in" ); + strcpy(macfb_fix.id, "Sonora"); v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); break; @@ -871,7 +860,7 @@ static int __init macfb_init(void) case MAC_MODEL_IISI: macfb_setpalette = rbv_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "RBV built-in" ); + strcpy(macfb_fix.id, "RBV"); rbv_cmap_regs = ioremap(DAC_BASE, 0x1000); break; @@ -880,7 +869,7 @@ static int __init macfb_init(void) case MAC_MODEL_C660: macfb_setpalette = civic_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "Civic built-in" ); + strcpy(macfb_fix.id, "Civic"); civic_cmap_regs = ioremap(CIVIC_BASE, 0x1000); break; @@ -901,7 +890,7 @@ static int __init macfb_init(void) v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); } - strcat( macfb_fix.id, "LC built-in" ); + strcpy(macfb_fix.id, "LC"); break; /* We think this may be like the LC II */ case MAC_MODEL_CCL: @@ -911,18 +900,18 @@ static int __init macfb_init(void) v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); } - strcat( macfb_fix.id, "Color Classic built-in" ); + strcpy(macfb_fix.id, "Color Classic"); break; /* And we *do* mean "weirdos" */ case MAC_MODEL_TV: - strcat( macfb_fix.id, "Mac TV built-in" ); + strcpy(macfb_fix.id, "Mac TV"); break; /* These don't have colour, so no need to worry */ case MAC_MODEL_SE30: case MAC_MODEL_CLII: - strcat( macfb_fix.id, "Monochrome built-in" ); + strcpy(macfb_fix.id, "Monochrome"); break; /* Powerbooks are particularly difficult. Many of @@ -935,7 +924,7 @@ static int __init macfb_init(void) case MAC_MODEL_PB140: case MAC_MODEL_PB145: case MAC_MODEL_PB170: - strcat( macfb_fix.id, "DDC built-in" ); + strcpy(macfb_fix.id, "DDC"); break; /* Internal is GSC, External (if present) is ViSC */ @@ -945,13 +934,13 @@ static int __init macfb_init(void) case MAC_MODEL_PB180: case MAC_MODEL_PB210: case MAC_MODEL_PB230: - strcat( macfb_fix.id, "GSC built-in" ); + strcpy(macfb_fix.id, "GSC"); break; /* Internal is TIM, External is ViSC */ case MAC_MODEL_PB165C: case MAC_MODEL_PB180C: - strcat( macfb_fix.id, "TIM built-in" ); + strcpy(macfb_fix.id, "TIM"); break; /* Internal is CSC, External is Keystone+Ariel. */ @@ -963,12 +952,12 @@ static int __init macfb_init(void) case MAC_MODEL_PB280C: macfb_setpalette = csc_setpalette; macfb_defined.activate = FB_ACTIVATE_NOW; - strcat( macfb_fix.id, "CSC built-in" ); + strcpy(macfb_fix.id, "CSC"); csc_cmap_regs = ioremap(CSC_BASE, 0x1000); break; default: - strcat( macfb_fix.id, "Unknown/Unsupported built-in" ); + strcpy(macfb_fix.id, "Unknown"); break; } @@ -978,16 +967,23 @@ static int __init macfb_init(void) fb_info.pseudo_palette = pseudo_palette; fb_info.flags = FBINFO_DEFAULT; - fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0); + err = fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0); + if (err) + goto fail_unmap; err = register_framebuffer(&fb_info); - if (!err) - printk("fb%d: %s frame buffer device\n", - fb_info.node, fb_info.fix.id); - else { - iounmap(fb_info.screen_base); - iounmap_macfb(); - } + if (err) + goto fail_dealloc; + + printk("fb%d: %s frame buffer device\n", + fb_info.node, fb_info.fix.id); + return 0; + +fail_dealloc: + fb_dealloc_cmap(&fb_info.cmap); +fail_unmap: + iounmap(fb_info.screen_base); + iounmap_macfb(); return err; } diff --git a/drivers/video/mb862xx/mb862xxfb.c b/drivers/video/mb862xx/mb862xxfb.c index 38718d95fbb..fb64234a382 100644 --- a/drivers/video/mb862xx/mb862xxfb.c +++ b/drivers/video/mb862xx/mb862xxfb.c @@ -927,9 +927,9 @@ static int __devinit mb862xx_pci_probe(struct pci_dev *pdev, } dev_dbg(dev, "fb phys 0x%llx 0x%lx\n", - (u64)par->fb_base_phys, (ulong)par->mapped_vram); + (unsigned long long)par->fb_base_phys, (ulong)par->mapped_vram); dev_dbg(dev, "mmio phys 0x%llx 0x%lx\n", - (u64)par->mmio_base_phys, (ulong)par->mmio_len); + (unsigned long long)par->mmio_base_phys, (ulong)par->mmio_len); if (mb862xx_pci_gdc_init(par)) goto io_unmap; diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile index 99da8b6d2c3..ed13889c116 100644 --- a/drivers/video/omap/Makefile +++ b/drivers/video/omap/Makefile @@ -23,7 +23,6 @@ objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o -objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o omapfb-objs := $(objs-yy) diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c deleted file mode 100644 index e55de201b8f..00000000000 --- a/drivers/video/omap/lcd_sx1.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - * LCD panel support for the Siemens SX1 mobile phone - * - * Current version : Vovan888@gmail.com, great help from FCA00000 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include <mach/gpio.h> -#include <mach/omapfb.h> -#include <mach/mcbsp.h> -#include <mach/mux.h> - -/* - * OMAP310 GPIO registers - */ -#define GPIO_DATA_INPUT 0xfffce000 -#define GPIO_DATA_OUTPUT 0xfffce004 -#define GPIO_DIR_CONTROL 0xfffce008 -#define GPIO_INT_CONTROL 0xfffce00c -#define GPIO_INT_MASK 0xfffce010 -#define GPIO_INT_STATUS 0xfffce014 -#define GPIO_PIN_CONTROL 0xfffce018 - - -#define A_LCD_SSC_RD 3 -#define A_LCD_SSC_SD 7 -#define _A_LCD_RESET 9 -#define _A_LCD_SSC_CS 12 -#define _A_LCD_SSC_A0 13 - -#define DSP_REG 0xE1017024 - -const unsigned char INIT_1[12] = { - 0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00 -}; - -const unsigned char INIT_2[127] = { - 0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00, - 0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00, - 0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00, - 0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01, - 0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01, - 0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01, - 0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01, - 0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01, - 0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01, - 0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01, - 0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01, - 0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01, - 0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01, - 0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01, - 0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02, - 0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00 -}; - -const unsigned char INIT_3[15] = { - 0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59, - 0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF -}; - -static void epson_sendbyte(int flag, unsigned char byte) -{ - int i, shifter = 0x80; - - if (!flag) - gpio_set_value(_A_LCD_SSC_A0, 0); - mdelay(2); - gpio_set_value(A_LCD_SSC_RD, 1); - - gpio_set_value(A_LCD_SSC_SD, flag); - - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200); - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202); - for (i = 0; i < 8; i++) { - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200); - gpio_set_value(A_LCD_SSC_SD, shifter & byte); - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202); - shifter >>= 1; - } - gpio_set_value(_A_LCD_SSC_A0, 1); -} - -static void init_system(void) -{ - omap_mcbsp_request(OMAP_MCBSP3); - omap_mcbsp_stop(OMAP_MCBSP3); -} - -static void setup_GPIO(void) -{ - /* new wave */ - gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd"); - gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd"); - gpio_request(_A_LCD_RESET, "lcd_reset"); - gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs"); - gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0"); - - /* set GPIOs to output, with initial data */ - gpio_direction_output(A_LCD_SSC_RD, 1); - gpio_direction_output(A_LCD_SSC_SD, 0); - gpio_direction_output(_A_LCD_RESET, 0); - gpio_direction_output(_A_LCD_SSC_CS, 1); - gpio_direction_output(_A_LCD_SSC_A0, 1); -} - -static void display_init(void) -{ - int i; - - omap_cfg_reg(MCBSP3_CLKX); - - mdelay(2); - setup_GPIO(); - mdelay(2); - - /* reset LCD */ - gpio_set_value(A_LCD_SSC_SD, 1); - epson_sendbyte(0, 0x25); - - gpio_set_value(_A_LCD_RESET, 0); - mdelay(10); - gpio_set_value(_A_LCD_RESET, 1); - - gpio_set_value(_A_LCD_SSC_CS, 1); - mdelay(2); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD, phase 1 */ - epson_sendbyte(0, 0xCA); - for (i = 0; i < 10; i++) - epson_sendbyte(1, INIT_1[i]); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 2 */ - epson_sendbyte(0, 0xCB); - for (i = 0; i < 125; i++) - epson_sendbyte(1, INIT_2[i]); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 2a */ - epson_sendbyte(0, 0xCC); - for (i = 0; i < 14; i++) - epson_sendbyte(1, INIT_3[i]); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 3 */ - epson_sendbyte(0, 0xBC); - epson_sendbyte(1, 0x08); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 4 */ - epson_sendbyte(0, 0x07); - epson_sendbyte(1, 0x05); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 5 */ - epson_sendbyte(0, 0x94); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 6 */ - epson_sendbyte(0, 0xC6); - epson_sendbyte(1, 0x80); - gpio_set_value(_A_LCD_SSC_CS, 1); - mdelay(100); /* used to be 1000 */ - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 7 */ - epson_sendbyte(0, 0x16); - epson_sendbyte(1, 0x02); - epson_sendbyte(1, 0x00); - epson_sendbyte(1, 0xB1); - epson_sendbyte(1, 0x00); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 8 */ - epson_sendbyte(0, 0x76); - epson_sendbyte(1, 0x00); - epson_sendbyte(1, 0x00); - epson_sendbyte(1, 0xDB); - epson_sendbyte(1, 0x00); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 9 */ - epson_sendbyte(0, 0xAF); - gpio_set_value(_A_LCD_SSC_CS, 1); -} - -static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) -{ - return 0; -} - -static void sx1_panel_cleanup(struct lcd_panel *panel) -{ -} - -static void sx1_panel_disable(struct lcd_panel *panel) -{ - printk(KERN_INFO "SX1: LCD panel disable\n"); - sx1_setmmipower(0); - gpio_set_value(_A_LCD_SSC_CS, 1); - - epson_sendbyte(0, 0x25); - gpio_set_value(_A_LCD_SSC_CS, 0); - - epson_sendbyte(0, 0xAE); - gpio_set_value(_A_LCD_SSC_CS, 1); - mdelay(100); - gpio_set_value(_A_LCD_SSC_CS, 0); - - epson_sendbyte(0, 0x95); - gpio_set_value(_A_LCD_SSC_CS, 1); -} - -static int sx1_panel_enable(struct lcd_panel *panel) -{ - printk(KERN_INFO "lcd_sx1: LCD panel enable\n"); - init_system(); - display_init(); - - sx1_setmmipower(1); - sx1_setbacklight(0x18); - sx1_setkeylight (0x06); - return 0; -} - - -static unsigned long sx1_panel_get_caps(struct lcd_panel *panel) -{ - return 0; -} - -struct lcd_panel sx1_panel = { - .name = "sx1", - .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC | - OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK | - OMAP_LCDC_INV_OUTPUT_EN, - - .x_res = 176, - .y_res = 220, - .data_lines = 16, - .bpp = 16, - .hsw = 5, - .hfp = 5, - .hbp = 5, - .vsw = 2, - .vfp = 1, - .vbp = 1, - .pixel_clock = 1500, - - .init = sx1_panel_init, - .cleanup = sx1_panel_cleanup, - .enable = sx1_panel_enable, - .disable = sx1_panel_disable, - .get_caps = sx1_panel_get_caps, -}; - -static int sx1_panel_probe(struct platform_device *pdev) -{ - omapfb_register_panel(&sx1_panel); - return 0; -} - -static int sx1_panel_remove(struct platform_device *pdev) -{ - return 0; -} - -static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg) -{ - return 0; -} - -static int sx1_panel_resume(struct platform_device *pdev) -{ - return 0; -} - -struct platform_driver sx1_panel_driver = { - .probe = sx1_panel_probe, - .remove = sx1_panel_remove, - .suspend = sx1_panel_suspend, - .resume = sx1_panel_resume, - .driver = { - .name = "lcd_sx1", - .owner = THIS_MODULE, - }, -}; - -static int sx1_panel_drv_init(void) -{ - return platform_driver_register(&sx1_panel_driver); -} - -static void sx1_panel_drv_cleanup(void) -{ - platform_driver_unregister(&sx1_panel_driver); -} - -module_init(sx1_panel_drv_init); -module_exit(sx1_panel_drv_cleanup); diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 5a5e407dc45..1a49519dafa 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -392,7 +392,7 @@ static void set_fb_fix(struct fb_info *fbi) int bpp; rg = &plane->fbdev->mem_desc.region[plane->idx]; - fbi->screen_base = (char __iomem *)rg->vaddr; + fbi->screen_base = rg->vaddr; fix->smem_start = rg->paddr; fix->smem_len = rg->size; diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 3a41ea10e8e..48ff701d3a7 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1738,7 +1738,7 @@ static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev) memset(fbi, 0, sizeof(struct pxafb_info)); fbi->dev = dev; - fbi->clk = clk_get(dev, "LCDCLK"); + fbi->clk = clk_get(dev, NULL); if (IS_ERR(fbi->clk)) { kfree(fbi); return NULL; diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index c052bd4c0b0..076f946fa0f 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c @@ -114,7 +114,7 @@ * - convert dma address types to dma_addr_t * - remove unused 'montype' stuff * - remove redundant zero inits of init_var after the initial - * memzero. + * memset. * - remove allow_modeset (acornfb idea does not belong here) * * 2001/05/28: <rmk@arm.linux.org.uk> diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c index a463b3dd837..2493f05e9f6 100644 --- a/drivers/video/xen-fbfront.c +++ b/drivers/video/xen-fbfront.c @@ -668,7 +668,7 @@ static struct xenbus_device_id xenfb_ids[] = { { "" } }; -static struct xenbus_driver xenfb = { +static struct xenbus_driver xenfb_driver = { .name = "vfb", .owner = THIS_MODULE, .ids = xenfb_ids, @@ -687,12 +687,12 @@ static int __init xenfb_init(void) if (xen_initial_domain()) return -ENODEV; - return xenbus_register_frontend(&xenfb); + return xenbus_register_frontend(&xenfb_driver); } static void __exit xenfb_cleanup(void) { - xenbus_unregister_driver(&xenfb); + xenbus_unregister_driver(&xenfb_driver); } module_init(xenfb_init); diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c index 5da3d2423cc..40a3a2afbfe 100644 --- a/drivers/video/xilinxfb.c +++ b/drivers/video/xilinxfb.c @@ -298,8 +298,9 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr, /* Put a banner in the log (for DEBUG) */ dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs); - dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n", - (void*)drvdata->fb_phys, drvdata->fb_virt, fbsize); + dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n", + (unsigned long long) drvdata->fb_phys, drvdata->fb_virt, + fbsize); return 0; /* success */ diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig index a14d5b6e4c7..90616822cd2 100644 --- a/drivers/w1/masters/Kconfig +++ b/drivers/w1/masters/Kconfig @@ -36,7 +36,7 @@ config W1_MASTER_DS2482 config W1_MASTER_DS1WM tristate "Maxim DS1WM 1-wire busmaster" - depends on W1 && ARM + depends on W1 && ARM && HAVE_CLK help Say Y here to enable the DS1WM 1-wire driver, such as that in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index a3765e0be4a..763c1ea5dce 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -40,6 +40,7 @@ #include <linux/bootmem.h> #include <linux/slab.h> #include <asm/desc.h> +#include <asm/cacheflush.h> #define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */ #define CRU_BIOS_SIGNATURE_VALUE 0x55524324 @@ -394,6 +395,8 @@ static void __devinit dmi_find_cru(const struct dmi_header *dm) smbios_cru64_ptr->double_offset; cru_rom_addr = ioremap(cru_physical_address, smbios_cru64_ptr->double_length); + set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK, + smbios_cru64_ptr->double_length >> PAGE_SHIFT); } } } @@ -482,7 +485,7 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, "Management Log for details.\n"); } - return NOTIFY_STOP; + return NOTIFY_OK; } /* diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index ca344a85eb9..2474ebca88f 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -1,7 +1,7 @@ /* * intel TCO vendor specific watchdog driver support * - * (c) Copyright 2006 Wim Van Sebroeck <wim@iguana.be>. + * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -19,8 +19,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_vendor_support" -#define DRV_VERSION "1.01" -#define DRV_RELDATE "11-Nov-2006" +#define DRV_VERSION "1.02" #define PFX DRV_NAME ": " /* Includes */ @@ -78,24 +77,6 @@ MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (n * 20.6 seconds. */ -static void supermicro_old_pre_start(unsigned long acpibase) -{ - unsigned long val32; - - val32 = inl(SMI_EN); - val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ - outl(val32, SMI_EN); /* Needed to activate watchdog */ -} - -static void supermicro_old_pre_stop(unsigned long acpibase) -{ - unsigned long val32; - - val32 = inl(SMI_EN); - val32 &= 0x00002000; /* Turn on SMI clearing watchdog */ - outl(val32, SMI_EN); /* Needed to deactivate watchdog */ -} - static void supermicro_old_pre_keepalive(unsigned long acpibase) { /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */ @@ -247,18 +228,14 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat) void iTCO_vendor_pre_start(unsigned long acpibase, unsigned int heartbeat) { - if (vendorsupport == SUPERMICRO_OLD_BOARD) - supermicro_old_pre_start(acpibase); - else if (vendorsupport == SUPERMICRO_NEW_BOARD) + if (vendorsupport == SUPERMICRO_NEW_BOARD) supermicro_new_pre_start(heartbeat); } EXPORT_SYMBOL(iTCO_vendor_pre_start); void iTCO_vendor_pre_stop(unsigned long acpibase) { - if (vendorsupport == SUPERMICRO_OLD_BOARD) - supermicro_old_pre_stop(acpibase); - else if (vendorsupport == SUPERMICRO_NEW_BOARD) + if (vendorsupport == SUPERMICRO_NEW_BOARD) supermicro_new_pre_stop(); } EXPORT_SYMBOL(iTCO_vendor_pre_stop); diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index bfb93bc2ca9..5b395a4ddfd 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -1,7 +1,7 @@ /* * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets) * - * (c) Copyright 2006-2007 Wim Van Sebroeck <wim@iguana.be>. + * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -20,34 +20,41 @@ * 82801BAM (ICH2-M) : document number 290687-002, 298242-027, * 82801CA (ICH3-S) : document number 290733-003, 290739-013, * 82801CAM (ICH3-M) : document number 290716-001, 290718-007, - * 82801DB (ICH4) : document number 290744-001, 290745-020, - * 82801DBM (ICH4-M) : document number 252337-001, 252663-005, + * 82801DB (ICH4) : document number 290744-001, 290745-025, + * 82801DBM (ICH4-M) : document number 252337-001, 252663-008, * 82801E (C-ICH) : document number 273599-001, 273645-002, - * 82801EB (ICH5) : document number 252516-001, 252517-003, - * 82801ER (ICH5R) : document number 252516-001, 252517-003, - * 82801FB (ICH6) : document number 301473-002, 301474-007, - * 82801FR (ICH6R) : document number 301473-002, 301474-007, - * 82801FBM (ICH6-M) : document number 301473-002, 301474-007, - * 82801FW (ICH6W) : document number 301473-001, 301474-007, - * 82801FRW (ICH6RW) : document number 301473-001, 301474-007, - * 82801GB (ICH7) : document number 307013-002, 307014-009, - * 82801GR (ICH7R) : document number 307013-002, 307014-009, - * 82801GDH (ICH7DH) : document number 307013-002, 307014-009, - * 82801GBM (ICH7-M) : document number 307013-002, 307014-009, - * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009, - * 82801HB (ICH8) : document number 313056-003, 313057-009, - * 82801HR (ICH8R) : document number 313056-003, 313057-009, - * 82801HBM (ICH8M) : document number 313056-003, 313057-009, - * 82801HH (ICH8DH) : document number 313056-003, 313057-009, - * 82801HO (ICH8DO) : document number 313056-003, 313057-009, - * 82801HEM (ICH8M-E) : document number 313056-003, 313057-009, - * 82801IB (ICH9) : document number 316972-001, 316973-006, - * 82801IR (ICH9R) : document number 316972-001, 316973-006, - * 82801IH (ICH9DH) : document number 316972-001, 316973-006, - * 82801IO (ICH9DO) : document number 316972-001, 316973-006, - * 6300ESB (6300ESB) : document number 300641-003, 300884-010, - * 631xESB (631xESB) : document number 313082-001, 313075-005, - * 632xESB (632xESB) : document number 313082-001, 313075-005 + * 82801EB (ICH5) : document number 252516-001, 252517-028, + * 82801ER (ICH5R) : document number 252516-001, 252517-028, + * 6300ESB (6300ESB) : document number 300641-004, 300884-013, + * 82801FB (ICH6) : document number 301473-002, 301474-026, + * 82801FR (ICH6R) : document number 301473-002, 301474-026, + * 82801FBM (ICH6-M) : document number 301473-002, 301474-026, + * 82801FW (ICH6W) : document number 301473-001, 301474-026, + * 82801FRW (ICH6RW) : document number 301473-001, 301474-026, + * 631xESB (631xESB) : document number 313082-001, 313075-006, + * 632xESB (632xESB) : document number 313082-001, 313075-006, + * 82801GB (ICH7) : document number 307013-003, 307014-024, + * 82801GR (ICH7R) : document number 307013-003, 307014-024, + * 82801GDH (ICH7DH) : document number 307013-003, 307014-024, + * 82801GBM (ICH7-M) : document number 307013-003, 307014-024, + * 82801GHM (ICH7-M DH) : document number 307013-003, 307014-024, + * 82801GU (ICH7-U) : document number 307013-003, 307014-024, + * 82801HB (ICH8) : document number 313056-003, 313057-017, + * 82801HR (ICH8R) : document number 313056-003, 313057-017, + * 82801HBM (ICH8M) : document number 313056-003, 313057-017, + * 82801HH (ICH8DH) : document number 313056-003, 313057-017, + * 82801HO (ICH8DO) : document number 313056-003, 313057-017, + * 82801HEM (ICH8M-E) : document number 313056-003, 313057-017, + * 82801IB (ICH9) : document number 316972-004, 316973-012, + * 82801IR (ICH9R) : document number 316972-004, 316973-012, + * 82801IH (ICH9DH) : document number 316972-004, 316973-012, + * 82801IO (ICH9DO) : document number 316972-004, 316973-012, + * 82801IBM (ICH9M) : document number 316972-004, 316973-012, + * 82801IEM (ICH9M-E) : document number 316972-004, 316973-012, + * 82801JIB (ICH10) : document number 319973-002, 319974-002, + * 82801JIR (ICH10R) : document number 319973-002, 319974-002, + * 82801JD (ICH10D) : document number 319973-002, 319974-002, + * 82801JDO (ICH10DO) : document number 319973-002, 319974-002 */ /* @@ -56,8 +63,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" -#define DRV_VERSION "1.03" -#define DRV_RELDATE "30-Apr-2008" +#define DRV_VERSION "1.04" #define PFX DRV_NAME ": " /* Includes */ @@ -96,19 +102,26 @@ enum iTCO_chipsets { TCO_ICH6, /* ICH6 & ICH6R */ TCO_ICH6M, /* ICH6-M */ TCO_ICH6W, /* ICH6W & ICH6RW */ + TCO_631XESB, /* 631xESB/632xESB */ TCO_ICH7, /* ICH7 & ICH7R */ - TCO_ICH7M, /* ICH7-M */ + TCO_ICH7DH, /* ICH7DH */ + TCO_ICH7M, /* ICH7-M & ICH7-U */ TCO_ICH7MDH, /* ICH7-M DH */ TCO_ICH8, /* ICH8 & ICH8R */ - TCO_ICH8ME, /* ICH8M-E */ TCO_ICH8DH, /* ICH8DH */ TCO_ICH8DO, /* ICH8DO */ TCO_ICH8M, /* ICH8M */ + TCO_ICH8ME, /* ICH8M-E */ TCO_ICH9, /* ICH9 */ TCO_ICH9R, /* ICH9R */ TCO_ICH9DH, /* ICH9DH */ TCO_ICH9DO, /* ICH9DO */ - TCO_631XESB, /* 631xESB/632xESB */ + TCO_ICH9M, /* ICH9M */ + TCO_ICH9ME, /* ICH9M-E */ + TCO_ICH10, /* ICH10 */ + TCO_ICH10R, /* ICH10R */ + TCO_ICH10D, /* ICH10D */ + TCO_ICH10DO, /* ICH10DO */ }; static struct { @@ -129,19 +142,26 @@ static struct { {"ICH6 or ICH6R", 2}, {"ICH6-M", 2}, {"ICH6W or ICH6RW", 2}, + {"631xESB/632xESB", 2}, {"ICH7 or ICH7R", 2}, - {"ICH7-M", 2}, + {"ICH7DH", 2}, + {"ICH7-M or ICH7-U", 2}, {"ICH7-M DH", 2}, {"ICH8 or ICH8R", 2}, - {"ICH8M-E", 2}, {"ICH8DH", 2}, {"ICH8DO", 2}, {"ICH8M", 2}, + {"ICH8M-E", 2}, {"ICH9", 2}, {"ICH9R", 2}, {"ICH9DH", 2}, {"ICH9DO", 2}, - {"631xESB/632xESB", 2}, + {"ICH9M", 2}, + {"ICH9M-E", 2}, + {"ICH10", 2}, + {"ICH10R", 2}, + {"ICH10D", 2}, + {"ICH10DO", 2}, {NULL, 0} }; @@ -175,18 +195,6 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M)}, - { ITCO_PCI_DEVICE(0x2918, TCO_ICH9)}, - { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH)}, - { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO)}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2671, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2672, TCO_631XESB)}, @@ -203,6 +211,25 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(0x267d, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x267e, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x267f, TCO_631XESB)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_30, TCO_ICH7DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME)}, + { ITCO_PCI_DEVICE(0x2918, TCO_ICH9)}, + { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH)}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO)}, + { ITCO_PCI_DEVICE(0x2919, TCO_ICH9M)}, + { ITCO_PCI_DEVICE(0x2917, TCO_ICH9ME)}, + { ITCO_PCI_DEVICE(0x3a18, TCO_ICH10)}, + { ITCO_PCI_DEVICE(0x3a16, TCO_ICH10R)}, + { ITCO_PCI_DEVICE(0x3a1a, TCO_ICH10D)}, + { ITCO_PCI_DEVICE(0x3a14, TCO_ICH10DO)}, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); @@ -311,6 +338,7 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void) static int iTCO_wdt_start(void) { unsigned int val; + unsigned long val32; spin_lock(&iTCO_wdt_private.io_lock); @@ -323,6 +351,18 @@ static int iTCO_wdt_start(void) return -EIO; } + /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ + val32 = inl(SMI_EN); + val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ + outl(val32, SMI_EN); + + /* Force the timer to its reload value by writing to the TCO_RLD + register */ + if (iTCO_wdt_private.iTCO_version == 2) + outw(0x01, TCO_RLD); + else if (iTCO_wdt_private.iTCO_version == 1) + outb(0x01, TCO_RLD); + /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */ val = inw(TCO1_CNT); val &= 0xf7ff; @@ -338,6 +378,7 @@ static int iTCO_wdt_start(void) static int iTCO_wdt_stop(void) { unsigned int val; + unsigned long val32; spin_lock(&iTCO_wdt_private.io_lock); @@ -349,6 +390,11 @@ static int iTCO_wdt_stop(void) outw(val, TCO1_CNT); val = inw(TCO1_CNT); + /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */ + val32 = inl(SMI_EN); + val32 |= 0x00002000; + outl(val32, SMI_EN); + /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ iTCO_wdt_set_NO_REBOOT_bit(); @@ -459,7 +505,6 @@ static int iTCO_wdt_open(struct inode *inode, struct file *file) /* * Reload and activate timer */ - iTCO_wdt_keepalive(); iTCO_wdt_start(); return nonseekable_open(inode, file); } @@ -604,7 +649,6 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, int ret; u32 base_address; unsigned long RCBA; - unsigned long val32; /* * Find the ACPI/PM base I/O address which is the base @@ -644,17 +688,13 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ iTCO_wdt_set_NO_REBOOT_bit(); - /* Set the TCO_EN bit in SMI_EN register */ + /* The TCO logic uses the TCO_EN bit in the SMI_EN register */ if (!request_region(SMI_EN, 4, "iTCO_wdt")) { printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", SMI_EN); ret = -EIO; goto out; } - val32 = inl(SMI_EN); - val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ - outl(val32, SMI_EN); - release_region(SMI_EN, 4); /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */ @@ -662,7 +702,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", TCOBASE); ret = -EIO; - goto out; + goto unreg_smi_en; } printk(KERN_INFO PFX @@ -672,8 +712,9 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, TCOBASE); /* Clear out the (probably old) status */ - outb(0, TCO1_STS); - outb(3, TCO2_STS); + outb(8, TCO1_STS); /* Clear the Time Out Status bit */ + outb(2, TCO2_STS); /* Clear SECOND_TO_STS bit */ + outb(4, TCO2_STS); /* Clear BOOT_STS bit */ /* Make sure the watchdog is not running */ iTCO_wdt_stop(); @@ -701,6 +742,8 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, unreg_region: release_region(TCOBASE, 0x20); +unreg_smi_en: + release_region(SMI_EN, 4); out: if (iTCO_wdt_private.iTCO_version == 2) iounmap(iTCO_wdt_private.gcs); @@ -718,6 +761,7 @@ static void __devexit iTCO_wdt_cleanup(void) /* Deregister */ misc_deregister(&iTCO_wdt_miscdev); release_region(TCOBASE, 0x20); + release_region(SMI_EN, 4); if (iTCO_wdt_private.iTCO_version == 2) iounmap(iTCO_wdt_private.gcs); pci_dev_put(iTCO_wdt_private.pdev); @@ -782,8 +826,8 @@ static int __init iTCO_wdt_init_module(void) { int err; - printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s (%s)\n", - DRV_VERSION, DRV_RELDATE); + printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s\n", + DRV_VERSION); err = platform_driver_register(&iTCO_wdt_driver); if (err) diff --git a/drivers/watchdog/mtx-1_wdt.c b/drivers/watchdog/mtx-1_wdt.c index b4b7b0a4c11..3acce623f20 100644 --- a/drivers/watchdog/mtx-1_wdt.c +++ b/drivers/watchdog/mtx-1_wdt.c @@ -98,6 +98,8 @@ static void mtx1_wdt_reset(void) static void mtx1_wdt_start(void) { + unsigned long flags; + spin_lock_irqsave(&mtx1_wdt_device.lock, flags); if (!mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 1; @@ -110,6 +112,8 @@ static void mtx1_wdt_start(void) static int mtx1_wdt_stop(void) { + unsigned long flags; + spin_lock_irqsave(&mtx1_wdt_device.lock, flags); if (mtx1_wdt_device.queue) { mtx1_wdt_device.queue = 0; diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index f7f6ce82a5e..e31925ee834 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -42,7 +42,7 @@ #undef S3C_VA_WATCHDOG #define S3C_VA_WATCHDOG (0) -#include <asm/plat-s3c/regs-watchdog.h> +#include <plat/regs-watchdog.h> #define PFX "s3c2410-wdt: " diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index 87977156ddb..e19b4579471 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c @@ -27,6 +27,7 @@ #include <linux/init.h> #include <linux/bitops.h> #include <linux/uaccess.h> +#include <linux/timex.h> #ifdef CONFIG_ARCH_PXA #include <mach/pxa-regs.h> |