aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/busses/Kconfig1
-rw-r--r--drivers/i2c/busses/i2c-i801.c2
-rw-r--r--drivers/message/i2o/pci.c15
-rw-r--r--drivers/pci/Kconfig2
-rw-r--r--drivers/pci/access.c75
-rw-r--r--drivers/pci/hotplug/acpiphp.h4
-rw-r--r--drivers/pci/hotplug/acpiphp_core.c39
-rw-r--r--drivers/pci/hotplug/acpiphp_glue.c8
-rw-r--r--drivers/pci/hotplug/ibmphp_pci.c4
-rw-r--r--drivers/pci/hotplug/pciehp_core.c7
-rw-r--r--drivers/pci/hotplug/pciehp_hpc.c2
-rw-r--r--drivers/pci/hotplug/rpadlpar_core.c2
-rw-r--r--drivers/pci/hotplug/rpaphp_core.c2
-rw-r--r--drivers/pci/hotplug/sgi_hotplug.c35
-rw-r--r--drivers/pci/msi.h8
-rw-r--r--drivers/pci/pci-acpi.c10
-rw-r--r--drivers/pci/pci-driver.c11
-rw-r--r--drivers/pci/pci-sysfs.c33
-rw-r--r--drivers/pci/pci.c123
-rw-r--r--drivers/pci/pci.h1
-rw-r--r--drivers/pci/probe.c27
-rw-r--r--drivers/pci/quirks.c59
-rw-r--r--drivers/pci/rom.c9
23 files changed, 263 insertions, 216 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 510816c16da..04bee524e31 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -125,6 +125,7 @@ config I2C_I801
ICH7
ESB2
ICH8
+ ICH9
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index bbb2fbee836..c7be2fdbd86 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -33,6 +33,7 @@
ICH7 27DA
ESB2 269B
ICH8 283E
+ ICH9 2930
This driver supports several versions of Intel's I/O Controller Hubs (ICH).
For SMBus support, they are similar to the PIIX4 and are part
of Intel's '810' and other chipsets.
@@ -457,6 +458,7 @@ static struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
{ 0, }
};
diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c
index 62f1ac08332..8287f95c8c4 100644
--- a/drivers/message/i2o/pci.c
+++ b/drivers/message/i2o/pci.c
@@ -320,7 +320,6 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev,
struct i2o_controller *c;
int rc;
struct pci_dev *i960 = NULL;
- int enabled = pdev->is_enabled;
printk(KERN_INFO "i2o: Checking for PCI I2O controllers...\n");
@@ -330,12 +329,11 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev,
return -ENODEV;
}
- if (!enabled)
- if ((rc = pci_enable_device(pdev))) {
- printk(KERN_WARNING "i2o: couldn't enable device %s\n",
- pci_name(pdev));
- return rc;
- }
+ if ((rc = pci_enable_device(pdev))) {
+ printk(KERN_WARNING "i2o: couldn't enable device %s\n",
+ pci_name(pdev));
+ return rc;
+ }
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_WARNING "i2o: no suitable DMA found for %s\n",
@@ -442,8 +440,7 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev,
i2o_iop_free(c);
disable:
- if (!enabled)
- pci_disable_device(pdev);
+ pci_disable_device(pdev);
return rc;
}
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 3cfb0a3575e..f1dd81a1d59 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -19,7 +19,7 @@ config PCI_MSI
config PCI_MULTITHREAD_PROBE
bool "PCI Multi-threaded probe (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL && BROKEN
+ depends on PCI && EXPERIMENTAL
help
Say Y here if you want the PCI core to spawn a new thread for
every PCI device that is probed. This can cause a huge
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index ea16805a153..73a58c73d52 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -1,6 +1,7 @@
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/ioport.h>
+#include <linux/wait.h>
#include "pci.h"
@@ -63,30 +64,42 @@ EXPORT_SYMBOL(pci_bus_write_config_byte);
EXPORT_SYMBOL(pci_bus_write_config_word);
EXPORT_SYMBOL(pci_bus_write_config_dword);
-static u32 pci_user_cached_config(struct pci_dev *dev, int pos)
-{
- u32 data;
+/*
+ * The following routines are to prevent the user from accessing PCI config
+ * space when it's unsafe to do so. Some devices require this during BIST and
+ * we're required to prevent it during D-state transitions.
+ *
+ * We have a bit per device to indicate it's blocked and a global wait queue
+ * for callers to sleep on until devices are unblocked.
+ */
+static DECLARE_WAIT_QUEUE_HEAD(pci_ucfg_wait);
- data = dev->saved_config_space[pos/sizeof(dev->saved_config_space[0])];
- data >>= (pos % sizeof(dev->saved_config_space[0])) * 8;
- return data;
+static noinline void pci_wait_ucfg(struct pci_dev *dev)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+ __add_wait_queue(&pci_ucfg_wait, &wait);
+ do {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ spin_unlock_irq(&pci_lock);
+ schedule();
+ spin_lock_irq(&pci_lock);
+ } while (dev->block_ucfg_access);
+ __remove_wait_queue(&pci_ucfg_wait, &wait);
}
#define PCI_USER_READ_CONFIG(size,type) \
int pci_user_read_config_##size \
(struct pci_dev *dev, int pos, type *val) \
{ \
- unsigned long flags; \
int ret = 0; \
u32 data = -1; \
if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
- spin_lock_irqsave(&pci_lock, flags); \
- if (likely(!dev->block_ucfg_access)) \
- ret = dev->bus->ops->read(dev->bus, dev->devfn, \
+ spin_lock_irq(&pci_lock); \
+ if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
+ ret = dev->bus->ops->read(dev->bus, dev->devfn, \
pos, sizeof(type), &data); \
- else if (pos < sizeof(dev->saved_config_space)) \
- data = pci_user_cached_config(dev, pos); \
- spin_unlock_irqrestore(&pci_lock, flags); \
+ spin_unlock_irq(&pci_lock); \
*val = (type)data; \
return ret; \
}
@@ -95,14 +108,13 @@ int pci_user_read_config_##size \
int pci_user_write_config_##size \
(struct pci_dev *dev, int pos, type val) \
{ \
- unsigned long flags; \
int ret = -EIO; \
if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
- spin_lock_irqsave(&pci_lock, flags); \
- if (likely(!dev->block_ucfg_access)) \
- ret = dev->bus->ops->write(dev->bus, dev->devfn, \
+ spin_lock_irq(&pci_lock); \
+ if (unlikely(dev->block_ucfg_access)) pci_wait_ucfg(dev); \
+ ret = dev->bus->ops->write(dev->bus, dev->devfn, \
pos, sizeof(type), val); \
- spin_unlock_irqrestore(&pci_lock, flags); \
+ spin_unlock_irq(&pci_lock); \
return ret; \
}
@@ -117,21 +129,23 @@ PCI_USER_WRITE_CONFIG(dword, u32)
* pci_block_user_cfg_access - Block userspace PCI config reads/writes
* @dev: pci device struct
*
- * This function blocks any userspace PCI config accesses from occurring.
- * When blocked, any writes will be bit bucketed and reads will return the
- * data saved using pci_save_state for the first 64 bytes of config
- * space and return 0xff for all other config reads.
- **/
+ * When user access is blocked, any reads or writes to config space will
+ * sleep until access is unblocked again. We don't allow nesting of
+ * block/unblock calls.
+ */
void pci_block_user_cfg_access(struct pci_dev *dev)
{
unsigned long flags;
+ int was_blocked;
- pci_save_state(dev);
-
- /* spinlock to synchronize with anyone reading config space now */
spin_lock_irqsave(&pci_lock, flags);
+ was_blocked = dev->block_ucfg_access;
dev->block_ucfg_access = 1;
spin_unlock_irqrestore(&pci_lock, flags);
+
+ /* If we BUG() inside the pci_lock, we're guaranteed to hose
+ * the machine */
+ BUG_ON(was_blocked);
}
EXPORT_SYMBOL_GPL(pci_block_user_cfg_access);
@@ -140,14 +154,19 @@ EXPORT_SYMBOL_GPL(pci_block_user_cfg_access);
* @dev: pci device struct
*
* This function allows userspace PCI config accesses to resume.
- **/
+ */
void pci_unblock_user_cfg_access(struct pci_dev *dev)
{
unsigned long flags;
- /* spinlock to synchronize with anyone reading saved config space */
spin_lock_irqsave(&pci_lock, flags);
+
+ /* This indicates a problem in the caller, but we don't need
+ * to kill them, unlike a double-block above. */
+ WARN_ON(!dev->block_ucfg_access);
+
dev->block_ucfg_access = 0;
+ wake_up_all(&pci_ucfg_wait);
spin_unlock_irqrestore(&pci_lock, flags);
}
EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access);
diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h
index 59c5b242d86..ddbadd95387 100644
--- a/drivers/pci/hotplug/acpiphp.h
+++ b/drivers/pci/hotplug/acpiphp.h
@@ -62,10 +62,10 @@ struct acpiphp_slot;
struct slot {
struct hotplug_slot *hotplug_slot;
struct acpiphp_slot *acpi_slot;
+ struct hotplug_slot_info info;
+ char name[SLOT_NAME_SIZE];
};
-
-
/**
* struct acpiphp_bridge - PCI bridge information
*
diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c
index c57d9d5ce84..40c79b03c7e 100644
--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -303,25 +303,15 @@ static int __init init_acpi(void)
/* read initial number of slots */
if (!retval) {
num_slots = acpiphp_get_num_slots();
- if (num_slots == 0)
+ if (num_slots == 0) {
+ acpiphp_glue_exit();
retval = -ENODEV;
+ }
}
return retval;
}
-
-/**
- * make_slot_name - make a slot name that appears in pcihpfs
- * @slot: slot to name
- *
- */
-static void make_slot_name(struct slot *slot)
-{
- snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%u",
- slot->acpi_slot->sun);
-}
-
/**
* release_slot - free up the memory used by a slot
* @hotplug_slot: slot to free
@@ -332,8 +322,6 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
- kfree(slot->hotplug_slot->info);
- kfree(slot->hotplug_slot->name);
kfree(slot->hotplug_slot);
kfree(slot);
}
@@ -342,26 +330,19 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot)
{
struct slot *slot;
- struct hotplug_slot *hotplug_slot;
- struct hotplug_slot_info *hotplug_slot_info;
int retval = -ENOMEM;
slot = kzalloc(sizeof(*slot), GFP_KERNEL);
if (!slot)
goto error;
- slot->hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL);
+ slot->hotplug_slot = kzalloc(sizeof(*slot->hotplug_slot), GFP_KERNEL);
if (!slot->hotplug_slot)
goto error_slot;
- slot->hotplug_slot->info = kzalloc(sizeof(*hotplug_slot_info),
- GFP_KERNEL);
- if (!slot->hotplug_slot->info)
- goto error_hpslot;
+ slot->hotplug_slot->info = &slot->info;
- slot->hotplug_slot->name = kzalloc(SLOT_NAME_SIZE, GFP_KERNEL);
- if (!slot->hotplug_slot->name)
- goto error_info;
+ slot->hotplug_slot->name = slot->name;
slot->hotplug_slot->private = slot;
slot->hotplug_slot->release = &release_slot;
@@ -376,21 +357,17 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot)
slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
acpiphp_slot->slot = slot;
- make_slot_name(slot);
+ snprintf(slot->name, sizeof(slot->name), "%u", slot->acpi_slot->sun);
retval = pci_hp_register(slot->hotplug_slot);
if (retval) {
err("pci_hp_register failed with error %d\n", retval);
- goto error_name;
+ goto error_hpslot;
}
info("Slot [%s] registered\n", slot->hotplug_slot->name);
return 0;
-error_name:
- kfree(slot->hotplug_slot->name);
-error_info:
- kfree(slot->hotplug_slot->info);
error_hpslot:
kfree(slot->hotplug_slot);
error_slot:
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 16167b01626..0b9d0db1590 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -1693,14 +1693,10 @@ void __exit acpiphp_glue_exit(void)
*/
int __init acpiphp_get_num_slots(void)
{
- struct list_head *node;
struct acpiphp_bridge *bridge;
- int num_slots;
-
- num_slots = 0;
+ int num_slots = 0;
- list_for_each (node, &bridge_list) {
- bridge = (struct acpiphp_bridge *)node;
+ list_for_each_entry (bridge, &bridge_list, list) {
dbg("Bus %04x:%02x has %d slot%s\n",
pci_domain_nr(bridge->pci_bus),
bridge->pci_bus->number, bridge->nr_slots,
diff --git a/drivers/pci/hotplug/ibmphp_pci.c b/drivers/pci/hotplug/ibmphp_pci.c
index d87a9e3eaee..d8f05d7a3c7 100644
--- a/drivers/pci/hotplug/ibmphp_pci.c
+++ b/drivers/pci/hotplug/ibmphp_pci.c
@@ -1371,12 +1371,12 @@ static int unconfigure_boot_bridge (u8 busno, u8 device, u8 function)
}
bus = ibmphp_find_res_bus (sec_number);
- debug ("bus->busno is %x\n", bus->busno);
- debug ("sec_number is %x\n", sec_number);
if (!bus) {
err ("cannot find Bus structure for the bridged device\n");
return -EINVAL;
}
+ debug("bus->busno is %x\n", bus->busno);
+ debug("sec_number is %x\n", sec_number);
ibmphp_remove_bus (bus, busno);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index f93e81e2d2c..f13f31323e8 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -521,14 +521,9 @@ static void __exit unload_pciehpd(void)
}
-static int hpdriver_context = 0;
-
static void pciehp_remove (struct pcie_device *device)
{
- printk("%s ENTRY\n", __FUNCTION__);
- printk("%s -> Call free_irq for irq = %d\n",
- __FUNCTION__, device->irq);
- free_irq(device->irq, &hpdriver_context);
+ /* XXX - Needs to be adapted to device driver model */
}
#ifdef CONFIG_PM
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 1c551c697c3..6d3f580f266 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -718,8 +718,6 @@ static void hpc_release_ctlr(struct controller *ctrl)
if (php_ctlr->irq) {
free_irq(php_ctlr->irq, ctrl);
php_ctlr->irq = 0;
- if (!pcie_mch_quirk)
- pci_disable_msi(php_ctlr->pci_dev);
}
}
if (php_ctlr->pci_dev)
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index 46825fee3ae..72383467a0d 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -63,7 +63,7 @@ static struct device_node *find_php_slot_pci_node(char *drc_name,
char *type;
int rc;
- while ((np = of_find_node_by_type(np, "pci"))) {
+ while ((np = of_find_node_by_name(np, "pci"))) {
rc = rpaphp_get_drc_props(np, NULL, &name, &type, NULL);
if (rc == 0)
if (!strcmp(drc_name, name) && !strcmp(drc_type, type))
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index 141486df235..71a2cb8baa4 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -356,7 +356,7 @@ static int __init rpaphp_init(void)
info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
init_MUTEX(&rpaphp_sem);
- while ((dn = of_find_node_by_type(dn, "pci")))
+ while ((dn = of_find_node_by_name(dn, "pci")))
rpaphp_add_slot(dn);
return 0;
diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
index b62ad31a973..5d188c55838 100644
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ b/drivers/pci/hotplug/sgi_hotplug.c
@@ -205,21 +205,6 @@ static struct hotplug_slot * sn_hp_destroy(void)
return bss_hotplug_slot;
}
-static void sn_bus_alloc_data(struct pci_dev *dev)
-{
- struct pci_bus *subordinate_bus;
- struct pci_dev *child;
-
- sn_pci_fixup_slot(dev);
-
- /* Recursively sets up the sn_irq_info structs */
- if (dev->subordinate) {
- subordinate_bus = dev->subordinate;
- list_for_each_entry(child, &subordinate_bus->devices, bus_list)
- sn_bus_alloc_data(child);
- }
-}
-
static void sn_bus_free_data(struct pci_dev *dev)
{
struct pci_bus *subordinate_bus;
@@ -337,6 +322,11 @@ static int sn_slot_disable(struct hotplug_slot *bss_hotplug_slot,
return rc;
}
+/*
+ * Power up and configure the slot via a SAL call to PROM.
+ * Scan slot (and any children), do any platform specific fixup,
+ * and find device driver.
+ */
static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
{
struct slot *slot = bss_hotplug_slot->private;
@@ -345,6 +335,7 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
int func, num_funcs;
int new_ppb = 0;
int rc;
+ void pcibios_fixup_device_resources(struct pci_dev *);
/* Serialize the Linux PCI infrastructure */
mutex_lock(&sn_hotplug_mutex);
@@ -367,9 +358,6 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
return -ENODEV;
}
- sn_pci_controller_fixup(pci_domain_nr(slot->pci_bus),
- slot->pci_bus->number,
- slot->pci_bus);
/*
* Map SN resources for all functions on the card
* to the Linux PCI interface and tell the drivers
@@ -380,6 +368,13 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
PCI_DEVFN(slot->device_num + 1,
PCI_FUNC(func)));
if (dev) {
+ /* Need to do slot fixup on PPB before fixup of children
+ * (PPB's pcidev_info needs to be in pcidev_info list
+ * before child's SN_PCIDEV_INFO() call to setup
+ * pdi_host_pcidev_info).
+ */
+ pcibios_fixup_device_resources(dev);
+ sn_pci_fixup_slot(dev);
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
unsigned char sec_bus;
pci_read_config_byte(dev, PCI_SECONDARY_BUS,
@@ -387,12 +382,8 @@ static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
new_bus = pci_add_new_bus(dev->bus, dev,
sec_bus);
pci_scan_child_bus(new_bus);
- sn_pci_controller_fixup(pci_domain_nr(new_bus),
- new_bus->number,
- new_bus);
new_ppb = 1;
}
- sn_bus_alloc_data(dev);
pci_dev_put(dev);
}
}
diff --git a/drivers/pci/msi.h b/drivers/pci/msi.h
index f0cca1772f9..3898f523714 100644
--- a/drivers/pci/msi.h
+++ b/drivers/pci/msi.h
@@ -6,14 +6,6 @@
#ifndef MSI_H
#define MSI_H
-/*
- * MSI-X Address Register
- */
-#define PCI_MSIX_FLAGS_QSIZE 0x7FF
-#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
-#define PCI_MSIX_FLAGS_BIRMASK (7 << 0)
-#define PCI_MSIX_FLAGS_BITMASK (1 << 0)
-
#define PCI_MSIX_ENTRY_SIZE 16
#define PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET 0
#define PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET 4
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index bb7456c1dba..a064f36a080 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -36,6 +36,7 @@ acpi_query_osc (
struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
union acpi_object *out_obj;
u32 osc_dw0;
+ acpi_status *ret_status = (acpi_status *)retval;
/* Setting up input parameters */
@@ -56,6 +57,7 @@ acpi_query_osc (
if (ACPI_FAILURE (status)) {
printk(KERN_DEBUG
"Evaluate _OSC Set fails. Status = 0x%04x\n", status);
+ *ret_status = status;
return status;
}
out_obj = output.pointer;
@@ -90,6 +92,7 @@ acpi_query_osc (
query_osc_out:
kfree(output.pointer);
+ *ret_status = status;
return status;
}
@@ -166,6 +169,7 @@ run_osc_out:
acpi_status pci_osc_support_set(u32 flags)
{
u32 temp;
+ acpi_status retval;
if (!(flags & OSC_SUPPORT_MASKS)) {
return AE_TYPE;
@@ -179,9 +183,13 @@ acpi_status pci_osc_support_set(u32 flags)
acpi_get_devices ( PCI_ROOT_HID_STRING,
acpi_query_osc,
ctrlset_buf,
- NULL );
+ (void **) &retval );
ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE;
ctrlset_buf[OSC_CONTROL_TYPE] = temp;
+ if (ACPI_FAILURE(retval)) {
+ /* no osc support at all */
+ ctrlset_buf[OSC_SUPPORT_TYPE] = 0;
+ }
return AE_OK;
}
EXPORT_SYMBOL(pci_osc_support_set);
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 194f1d21d3d..e5ae3a0c13b 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -329,8 +329,8 @@ static int pci_default_resume(struct pci_dev *pci_dev)
/* restore the PCI config space */
pci_restore_state(pci_dev);
/* if the device was enabled before suspend, reenable */
- if (pci_dev->is_enabled)
- retval = pci_enable_device(pci_dev);
+ if (atomic_read(&pci_dev->enable_cnt))
+ retval = __pci_enable_device(pci_dev);
/* if the device was busmaster before the suspend, make it busmaster again */
if (pci_dev->is_busmaster)
pci_set_master(pci_dev);
@@ -445,9 +445,12 @@ int __pci_register_driver(struct pci_driver *drv, struct module *owner)
/* register with core */
error = driver_register(&drv->driver);
+ if (error)
+ return error;
- if (!error)
- error = pci_create_newid_file(drv);
+ error = pci_create_newid_file(drv);
+ if (error)
+ driver_unregister(&drv->driver);
return error;
}
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index f952bfea48a..7a94076752d 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -42,7 +42,6 @@ pci_config_attr(subsystem_vendor, "0x%04x\n");
pci_config_attr(subsystem_device, "0x%04x\n");
pci_config_attr(class, "0x%06x\n");
pci_config_attr(irq, "%u\n");
-pci_config_attr(is_enabled, "%u\n");
static ssize_t broken_parity_status_show(struct device *dev,
struct device_attribute *attr,
@@ -112,26 +111,36 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
(u8)(pci_dev->class >> 16), (u8)(pci_dev->class >> 8),
(u8)(pci_dev->class));
}
-static ssize_t
-is_enabled_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+
+static ssize_t is_enabled_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
{
+ ssize_t result = -EINVAL;
struct pci_dev *pdev = to_pci_dev(dev);
- int retval = 0;
/* this can crash the machine when done on the "wrong" device */
if (!capable(CAP_SYS_ADMIN))
return count;
- if (*buf == '0')
- pci_disable_device(pdev);
+ if (*buf == '0') {
+ if (atomic_read(&pdev->enable_cnt) != 0)
+ pci_disable_device(pdev);
+ else
+ result = -EIO;
+ } else if (*buf == '1')
+ result = pci_enable_device(pdev);
+
+ return result < 0 ? result : count;
+}
- if (*buf == '1')
- retval = pci_enable_device(pdev);
+static ssize_t is_enabled_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct pci_dev *pdev;
- if (retval)
- return retval;
- return count;
+ pdev = to_pci_dev (dev);
+ return sprintf (buf, "%u\n", atomic_read(&pdev->enable_cnt));
}
static ssize_t
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index a544997399b..5a14b73cf3a 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -490,6 +490,47 @@ static void pci_restore_pcie_state(struct pci_dev *dev)
kfree(save_state);
}
+
+static int pci_save_pcix_state(struct pci_dev *dev)
+{
+ int pos, i = 0;
+ struct pci_cap_saved_state *save_state;
+ u16 *cap;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (pos <= 0)
+ return 0;
+
+ save_state = kzalloc(sizeof(*save_state) + sizeof(u16), GFP_KERNEL);
+ if (!save_state) {
+ dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n");
+ return -ENOMEM;
+ }
+ cap = (u16 *)&save_state->data[0];
+
+ pci_read_config_word(dev, pos + PCI_X_CMD, &cap[i++]);
+ pci_add_saved_cap(dev, save_state);
+ return 0;
+}
+
+static void pci_restore_pcix_state(struct pci_dev *dev)
+{
+ int i = 0, pos;
+ struct pci_cap_saved_state *save_state;
+ u16 *cap;
+
+ save_state = pci_find_saved_cap(dev, PCI_CAP_ID_PCIX);
+ pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (!save_state || pos <= 0)
+ return;
+ cap = (u16 *)&save_state->data[0];
+
+ pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]);
+ pci_remove_saved_cap(save_state);
+ kfree(save_state);
+}
+
+
/**
* pci_save_state - save the PCI configuration space of a device before suspending
* @dev: - PCI device that we're dealing with
@@ -507,6 +548,8 @@ pci_save_state(struct pci_dev *dev)
return i;
if ((i = pci_save_pcie_state(dev)) != 0)
return i;
+ if ((i = pci_save_pcix_state(dev)) != 0)
+ return i;
return 0;
}
@@ -538,6 +581,7 @@ pci_restore_state(struct pci_dev *dev)
dev->saved_config_space[i]);
}
}
+ pci_restore_pcix_state(dev);
pci_restore_msi_state(dev);
pci_restore_msix_state(dev);
return 0;
@@ -568,30 +612,51 @@ pci_enable_device_bars(struct pci_dev *dev, int bars)
}
/**
- * pci_enable_device - Initialize device before it's used by a driver.
+ * __pci_enable_device - Initialize device before it's used by a driver.
* @dev: PCI device to be initialized
*
* Initialize device before it's used by a driver. Ask low-level code
* to enable I/O and memory. Wake up the device if it was suspended.
* Beware, this function can fail.
+ *
+ * Note this function is a backend and is not supposed to be called by
+ * normal code, use pci_enable_device() instead.
*/
int
-pci_enable_device(struct pci_dev *dev)
+__pci_enable_device(struct pci_dev *dev)
{
int err;
- if (dev->is_enabled)
- return 0;
-
err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1);
if (err)
return err;
pci_fixup_device(pci_fixup_enable, dev);
- dev->is_enabled = 1;
return 0;
}
/**
+ * pci_enable_device - Initialize device before it's used by a driver.
+ * @dev: PCI device to be initialized
+ *
+ * Initialize device before it's used by a driver. Ask low-level code
+ * to enable I/O and memory. Wake up the device if it was suspended.
+ * Beware, this function can fail.
+ *
+ * Note we don't actually enable the device many times if we call
+ * this function repeatedly (we just increment the count).
+ */
+int pci_enable_device(struct pci_dev *dev)
+{
+ int result;
+ if (atomic_add_return(1, &dev->enable_cnt) > 1)
+ return 0; /* already enabled */
+ result = __pci_enable_device(dev);
+ if (result < 0)
+ atomic_dec(&dev->enable_cnt);
+ return result;
+}
+
+/**
* pcibios_disable_device - disable arch specific PCI resources for device dev
* @dev: the PCI device to disable
*
@@ -607,12 +672,18 @@ void __attribute__ ((weak)) pcibios_disable_device (struct pci_dev *dev) {}
*
* Signal to the system that the PCI device is not in use by the system
* anymore. This only involves disabling PCI bus-mastering, if active.
+ *
+ * Note we don't actually disable the device until all callers of
+ * pci_device_enable() have called pci_device_disable().
*/
void
pci_disable_device(struct pci_dev *dev)
{
u16 pci_command;
+ if (atomic_sub_return(1, &dev->enable_cnt) != 0)
+ return;
+
if (dev->msi_enabled)
disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
PCI_CAP_ID_MSI);
@@ -628,7 +699,6 @@ pci_disable_device(struct pci_dev *dev)
dev->is_busmaster = 0;
pcibios_disable_device(dev);
- dev->is_enabled = 0;
}
/**
@@ -831,22 +901,38 @@ pci_set_master(struct pci_dev *dev)
pcibios_set_master(dev);
}
-#ifndef HAVE_ARCH_PCI_MWI
+#ifdef PCI_DISABLE_MWI
+int pci_set_mwi(struct pci_dev *dev)
+{
+ return 0;
+}
+
+void pci_clear_mwi(struct pci_dev *dev)
+{
+}
+
+#else
+
+#ifndef PCI_CACHE_LINE_BYTES
+#define PCI_CACHE_LINE_BYTES L1_CACHE_BYTES
+#endif
+
/* This can be overridden by arch code. */
-u8 pci_cache_line_size = L1_CACHE_BYTES >> 2;
+/* Don't forget this is measured in 32-bit words, not bytes */
+u8 pci_cache_line_size = PCI_CACHE_LINE_BYTES / 4;
/**
- * pci_generic_prep_mwi - helper function for pci_set_mwi
- * @dev: the PCI device for which MWI is enabled
+ * pci_set_cacheline_size - ensure the CACHE_LINE_SIZE register is programmed
+ * @dev: the PCI device for which MWI is to be enabled
*
- * Helper function for generic implementation of pcibios_prep_mwi
- * function. Originally copied from drivers/net/acenic.c.
+ * Helper function for pci_set_mwi.
+ * Originally copied from drivers/net/acenic.c.
* Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
static int
-pci_generic_prep_mwi(struct pci_dev *dev)
+pci_set_cacheline_size(struct pci_dev *dev)
{
u8 cacheline_size;
@@ -872,7 +958,6 @@ pci_generic_prep_mwi(struct pci_dev *dev)
return -EINVAL;
}
-#endif /* !HAVE_ARCH_PCI_MWI */
/**
* pci_set_mwi - enables memory-write-invalidate PCI transaction
@@ -890,12 +975,7 @@ pci_set_mwi(struct pci_dev *dev)
int rc;
u16 cmd;
-#ifdef HAVE_ARCH_PCI_MWI
- rc = pcibios_prep_mwi(dev);
-#else
- rc = pci_generic_prep_mwi(dev);
-#endif
-
+ rc = pci_set_cacheline_size(dev);
if (rc)
return rc;
@@ -926,6 +1006,7 @@ pci_clear_mwi(struct pci_dev *dev)
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
}
+#endif /* ! PCI_DISABLE_MWI */
/**
* pci_intx - enables/disables PCI INTx for device dev
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 6bf327db5c5..398852f526a 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -1,5 +1,6 @@
/* Functions internal to the PCI core code */
+extern int __must_check __pci_enable_device(struct pci_dev *);
extern int pci_uevent(struct device *dev, char **envp, int num_envp,
char *buffer, int buffer_size);
extern int pci_create_sysfs_dev_files(struct pci_dev *pdev);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e159d660449..0eeac60042b 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -679,6 +679,33 @@ static int pci_setup_device(struct pci_dev * dev)
pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
+
+ /*
+ * Do the ugly legacy mode stuff here rather than broken chip
+ * quirk code. Legacy mode ATA controllers have fixed
+ * addresses. These are not always echoed in BAR0-3, and
+ * BAR0-3 in a few cases contain junk!
+ */
+ if (class == PCI_CLASS_STORAGE_IDE) {
+ u8 progif;
+ pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
+ if ((progif & 1) == 0) {
+ dev->resource[0].start = 0x1F0;
+ dev->resource[0].end = 0x1F7;
+ dev->resource[0].flags = IORESOURCE_IO;
+ dev->resource[1].start = 0x3F6;
+ dev->resource[1].end = 0x3F6;
+ dev->resource[1].flags = IORESOURCE_IO;
+ }
+ if ((progif & 4) == 0) {
+ dev->resource[2].start = 0x170;
+ dev->resource[2].end = 0x177;
+ dev->resource[2].flags = IORESOURCE_IO;
+ dev->resource[3].start = 0x376;
+ dev->resource[3].end = 0x376;
+ dev->resource[3].flags = IORESOURCE_IO;
+ }
+ }
break;
case PCI_HEADER_TYPE_BRIDGE: /* bridge header */
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 5b448381169..9ca9b9bf616 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -797,56 +797,6 @@ static void __init quirk_mediagx_master(struct pci_dev *dev)
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master );
/*
- * As per PCI spec, ignore base address registers 0-3 of the IDE controllers
- * running in Compatible mode (bits 0 and 2 in the ProgIf for primary and
- * secondary channels respectively). If the device reports Compatible mode
- * but does use BAR0-3 for address decoding, we assume that firmware has
- * programmed these BARs with standard values (0x1f0,0x3f4 and 0x170,0x374).
- * Exceptions (if they exist) must be handled in chip/architecture specific
- * fixups.
- *
- * Note: for non x86 people. You may need an arch specific quirk to handle
- * moving IDE devices to native mode as well. Some plug in card devices power
- * up in compatible mode and assume the BIOS will adjust them.
- *
- * Q: should we load the 0x1f0,0x3f4 into the registers or zap them as
- * we do now ? We don't want is pci_enable_device to come along
- * and assign new resources. Both approaches work for that.
- */
-static void __devinit quirk_ide_bases(struct pci_dev *dev)
-{
- struct resource *res;
- int first_bar = 2, last_bar = 0;
-
- if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
- return;
-
- res = &dev->resource[0];
-
- /* primary channel: ProgIf bit 0, BAR0, BAR1 */
- if (!(dev->class & 1) && (res[0].flags || res[1].flags)) {
- res[0].start = res[0].end = res[0].flags = 0;
- res[1].start = res[1].end = res[1].flags = 0;
- first_bar = 0;
- last_bar = 1;
- }
-
- /* secondary channel: ProgIf bit 2, BAR2, BAR3 */
- if (!(dev->class & 4) && (res[2].flags || res[3].flags)) {
- res[2].start = res[2].end = res[2].flags = 0;
- res[3].start = res[3].end = res[3].flags = 0;
- last_bar = 3;
- }
-
- if (!last_bar)
- return;
-
- printk(KERN_INFO "PCI: Ignoring BAR%d-%d of IDE controller %s\n",
- first_bar, last_bar, pci_name(dev));
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_ide_bases);
-
-/*
* Ensure C0 rev restreaming is off. This is normally done by
* the BIOS but in the odd case it is not the results are corruption
* hence the presence of a Linux check
@@ -880,11 +830,10 @@ static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev)
prog &= ~5;
pdev->class &= ~5;
pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
- /* need to re-assign BARs for compat mode */
- quirk_ide_bases(pdev);
+ /* PCI layer will sort out resources */
}
}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide );
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide );
/*
* Intel 82801CAM ICH3-M datasheet says IDE modes must be the same
@@ -900,11 +849,9 @@ static void __init quirk_ide_samemode(struct pci_dev *pdev)
prog &= ~5;
pdev->class &= ~5;
pci_write_config_byte(pdev, PCI_CLASS_PROG, prog);
- /* need to re-assign BARs for compat mode */
- quirk_ide_bases(pdev);
}
}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode);
/* This was originally an Alpha specific thing, but it really fits here.
* The i82375 PCI/EISA bridge appears as non-classified. Fix that.
diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c
index e1dcefc69bb..d087e081771 100644
--- a/drivers/pci/rom.c
+++ b/drivers/pci/rom.c
@@ -81,7 +81,8 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size)
start = (loff_t)0xC0000;
*size = 0x20000; /* cover C000:0 through E000:0 */
} else {
- if (res->flags & IORESOURCE_ROM_COPY) {
+ if (res->flags &
+ (IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY)) {
*size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
return (void __iomem *)(unsigned long)
pci_resource_start(pdev, PCI_ROM_RESOURCE);
@@ -165,7 +166,8 @@ void __iomem *pci_map_rom_copy(struct pci_dev *pdev, size_t *size)
if (!rom)
return NULL;
- if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_SHADOW))
+ if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_SHADOW |
+ IORESOURCE_ROM_BIOS_COPY))
return rom;
res->start = (unsigned long)kmalloc(*size, GFP_KERNEL);
@@ -191,7 +193,7 @@ void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom)
{
struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
- if (res->flags & IORESOURCE_ROM_COPY)
+ if (res->flags & (IORESOURCE_ROM_COPY | IORESOURCE_ROM_BIOS_COPY))
return;
iounmap(rom);
@@ -215,6 +217,7 @@ void pci_remove_rom(struct pci_dev *pdev)
sysfs_remove_bin_file(&pdev->dev.kobj, pdev->rom_attr);
if (!(res->flags & (IORESOURCE_ROM_ENABLE |
IORESOURCE_ROM_SHADOW |
+ IORESOURCE_ROM_BIOS_COPY |
IORESOURCE_ROM_COPY)))
pci_disable_rom(pdev);
}