diff options
Diffstat (limited to 'drivers')
23 files changed, 158 insertions, 133 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 83d52c8acab..2cafa5c1783 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1293,9 +1293,6 @@ config PCNET32_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See <file:Documentation/networking/NAPI_HOWTO.txt> for more - information. - If in doubt, say N. config AMD8111_ETH @@ -1313,7 +1310,7 @@ config AMD8111_ETH will be called amd8111e. config AMD8111E_NAPI - bool "Enable NAPI support" + bool "Use RX polling (NAPI)" depends on AMD8111_ETH help NAPI is a new driver API designed to reduce CPU and interrupt load @@ -1324,9 +1321,6 @@ config AMD8111E_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See <file:Documentation/networking/NAPI_HOWTO.txt> for more - information. - If in doubt, say N. config ADAPTEC_STARFIRE @@ -1355,9 +1349,6 @@ config ADAPTEC_STARFIRE_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See <file:Documentation/networking/NAPI_HOWTO.txt> for more - information. - If in doubt, say N. config AC3200 @@ -1431,7 +1422,7 @@ config FORCEDETH called forcedeth. config FORCEDETH_NAPI - bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)" + bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" depends on FORCEDETH && EXPERIMENTAL help NAPI is a new driver API designed to reduce CPU and interrupt load @@ -1442,9 +1433,6 @@ config FORCEDETH_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See <file:Documentation/networking/NAPI_HOWTO.txt> for more - information. - If in doubt, say N. config CS89x0 @@ -1756,9 +1744,6 @@ config VIA_RHINE_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See <file:Documentation/networking/NAPI_HOWTO.txt> for more - information. - config LAN_SAA9730 bool "Philips SAA9730 Ethernet support" depends on NET_PCI && PCI && MIPS_ATLAS @@ -2003,9 +1988,6 @@ config E1000_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See <file:Documentation/networking/NAPI_HOWTO.txt> for more - information. - If in doubt, say N. config E1000_DISABLE_PACKET_SPLIT @@ -2099,7 +2081,7 @@ config R8169 will be called r8169. This is recommended. config R8169_NAPI - bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)" + bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" depends on R8169 && EXPERIMENTAL help NAPI is a new driver API designed to reduce CPU and interrupt load @@ -2110,9 +2092,6 @@ config R8169_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See <file:Documentation/networking/NAPI_HOWTO.txt> for more - information. - If in doubt, say N. config R8169_VLAN @@ -2364,7 +2343,7 @@ config GIANFAR and MPC86xx family of chips, and the FEC on the 8540. config GFAR_NAPI - bool "NAPI Support" + bool "Use Rx Polling (NAPI)" depends on GIANFAR config UCC_GETH @@ -2376,7 +2355,7 @@ config UCC_GETH which is available on some Freescale SOCs. config UGETH_NAPI - bool "NAPI Support" + bool "Use Rx Polling (NAPI)" depends on UCC_GETH config UGETH_MAGIC_PACKET @@ -2494,7 +2473,7 @@ config CHELSIO_T3 config EHEA tristate "eHEA Ethernet support" - depends on IBMEBUS + depends on IBMEBUS && INET select INET_LRO ---help--- This driver supports the IBM pSeries eHEA ethernet adapter. @@ -2559,9 +2538,6 @@ config IXGB_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See <file:Documentation/networking/NAPI_HOWTO.txt> for more - information. - If in doubt, say N. config S2IO @@ -2584,14 +2560,11 @@ config S2IO_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See <file:Documentation/networking/NAPI_HOWTO.txt> for more - information. - If in doubt, say N. config MYRI10GE tristate "Myricom Myri-10G Ethernet support" - depends on PCI + depends on PCI && INET select FW_LOADER select CRC32 select INET_LRO diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 27ac010900a..3286d2a0a87 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -542,7 +542,8 @@ dm9000_probe(struct platform_device *pdev) if (id_val != DM9000_ID) { printk("%s: wrong id: 0x%08x\n", CARDNAME, id_val); - goto release; + ret = -ENODEV; + goto out; } /* from this point we assume that we have found a DM9000 */ @@ -602,8 +603,7 @@ dm9000_probe(struct platform_device *pdev) } return 0; - release: - out: +out: printk("%s: not found (%d).\n", CARDNAME, ret); dm9000_release_board(pdev, db); diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c index 8cd243d92af..2747b1f89ff 100644 --- a/drivers/net/phy/mdio-bitbang.c +++ b/drivers/net/phy/mdio-bitbang.c @@ -185,3 +185,5 @@ void free_mdio_bitbang(struct mii_bus *bus) module_put(ctrl->ops->owner); kfree(bus); } + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index df10af7df7b..35d15e85007 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -1629,7 +1629,7 @@ tsi108_init_one(struct platform_device *pdev) goto register_fail; } - printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: %s\n" + printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: %s\n", dev->name, print_mac(mac, dev->dev_addr)); #ifdef DEBUG data->msg_enable = DEBUG; diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig index 1c537d5a306..49d7a290dbb 100644 --- a/drivers/net/tulip/Kconfig +++ b/drivers/net/tulip/Kconfig @@ -67,7 +67,7 @@ config TULIP_MMIO If in doubt, say N. config TULIP_NAPI - bool "Use NAPI RX polling " + bool "Use RX polling (NAPI)" depends on TULIP help NAPI is a new driver API designed to reduce CPU and interrupt load @@ -78,18 +78,16 @@ config TULIP_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See <file:Documentation/networking/NAPI_HOWTO.txt> for more - information. - If in doubt, say N. config TULIP_NAPI_HW_MITIGATION - bool "Use Interrupt Mitigation " + bool "Use Interrupt Mitigation" depends on TULIP_NAPI ---help--- - Use HW to reduce RX interrupts. Not strict necessary since NAPI reduces - RX interrupts but itself. Although this reduces RX interrupts even at - low levels traffic at the cost of a small latency. + Use HW to reduce RX interrupts. Not strictly necessary since NAPI + reduces RX interrupts by itself. Interrupt mitigation reduces RX + interrupts even at low levels of traffic at the cost of a small + latency. If in doubt, say Y. diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index c141a264ac4..9d9ff76a9bc 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -49,7 +49,6 @@ #include "pio.h" #include "sysfs.h" #include "xmit.h" -#include "sysfs.h" #include "lo.h" #include "pcmcia.h" @@ -3495,7 +3494,7 @@ static int b43_start(struct ieee80211_hw *hw) struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; int did_init = 0; - int err; + int err = 0; mutex_lock(&wl->mutex); @@ -3521,7 +3520,7 @@ static int b43_start(struct ieee80211_hw *hw) return err; } -void b43_stop(struct ieee80211_hw *hw) +static void b43_stop(struct ieee80211_hw *hw) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index f0749510bcd..d09479e816c 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3306,7 +3306,7 @@ static int b43legacy_start(struct ieee80211_hw *hw) struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); struct b43legacy_wldev *dev = wl->current_dev; int did_init = 0; - int err; + int err = 0; mutex_lock(&wl->mutex); diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index c144e3cdb89..7a7797560a2 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -2089,12 +2089,46 @@ static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status) queue_delayed_work(priv->workqueue, &priv->rf_kill, round_jiffies(HZ)); } +static void send_scan_event(void *data) +{ + struct ipw2100_priv *priv = data; + union iwreq_data wrqu; + + wrqu.data.length = 0; + wrqu.data.flags = 0; + wireless_send_event(priv->net_dev, SIOCGIWSCAN, &wrqu, NULL); +} + +static void ipw2100_scan_event_later(struct work_struct *work) +{ + send_scan_event(container_of(work, struct ipw2100_priv, + scan_event_later.work)); +} + +static void ipw2100_scan_event_now(struct work_struct *work) +{ + send_scan_event(container_of(work, struct ipw2100_priv, + scan_event_now)); +} + static void isr_scan_complete(struct ipw2100_priv *priv, u32 status) { IPW_DEBUG_SCAN("scan complete\n"); /* Age the scan results... */ priv->ieee->scans++; priv->status &= ~STATUS_SCANNING; + + /* Only userspace-requested scan completion events go out immediately */ + if (!priv->user_requested_scan) { + if (!delayed_work_pending(&priv->scan_event_later)) + queue_delayed_work(priv->workqueue, + &priv->scan_event_later, + round_jiffies(msecs_to_jiffies(4000))); + } else { + priv->user_requested_scan = 0; + cancel_delayed_work(&priv->scan_event_later); + queue_work(priv->workqueue, &priv->scan_event_now); + } } #ifdef CONFIG_IPW2100_DEBUG @@ -4349,6 +4383,7 @@ static void ipw2100_kill_workqueue(struct ipw2100_priv *priv) cancel_delayed_work(&priv->wx_event_work); cancel_delayed_work(&priv->hang_check); cancel_delayed_work(&priv->rf_kill); + cancel_delayed_work(&priv->scan_event_later); destroy_workqueue(priv->workqueue); priv->workqueue = NULL; } @@ -6092,6 +6127,8 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev, INIT_DELAYED_WORK(&priv->wx_event_work, ipw2100_wx_event_work); INIT_DELAYED_WORK(&priv->hang_check, ipw2100_hang_check); INIT_DELAYED_WORK(&priv->rf_kill, ipw2100_rf_kill); + INIT_WORK(&priv->scan_event_now, ipw2100_scan_event_now); + INIT_DELAYED_WORK(&priv->scan_event_later, ipw2100_scan_event_later); tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) ipw2100_irq_tasklet, (unsigned long)priv); @@ -7396,6 +7433,8 @@ static int ipw2100_wx_set_scan(struct net_device *dev, } IPW_DEBUG_WX("Initiating scan...\n"); + + priv->user_requested_scan = 1; if (ipw2100_set_scan_options(priv) || ipw2100_start_scan(priv)) { IPW_DEBUG_WX("Start scan failed.\n"); diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h index 2b8be2418fa..bbf1ddcafba 100644 --- a/drivers/net/wireless/ipw2100.h +++ b/drivers/net/wireless/ipw2100.h @@ -586,6 +586,10 @@ struct ipw2100_priv { struct delayed_work wx_event_work; struct delayed_work hang_check; struct delayed_work rf_kill; + struct work_struct scan_event_now; + struct delayed_work scan_event_later; + + int user_requested_scan; u32 interrupts; int tx_interrupts; diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index f4aabcf480e..262ab0b5582 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -37,9 +37,6 @@ #include <linux/workqueue.h> -#include <net/mac80211.h> -#include <linux/wireless.h> - #define IWL 3945 #include "../net/mac80211/ieee80211_rate.h" diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index acb38750535..19bcb01e278 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -38,7 +38,6 @@ #include <net/mac80211.h> #include <linux/etherdevice.h> -#include <linux/delay.h> #define IWL 3945 diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c index 287c75705c4..8dc78c0bf1f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c @@ -36,9 +36,6 @@ #include <linux/workqueue.h> -#include <net/mac80211.h> -#include <linux/wireless.h> - #define IWL 4965 #include "../net/mac80211/ieee80211_rate.h" @@ -2024,12 +2021,18 @@ static int open_file_generic(struct inode *inode, struct file *file) static void rs_dbgfs_set_mcs(struct iwl_rate_scale_priv *rs_priv, struct iwl_rate *mcs, int index) { - const u32 cck_rate = 0x820A; + u32 base_rate; + + if (rs_priv->phymode == (u8) MODE_IEEE80211A) + base_rate = 0x800D; + else + base_rate = 0x820A; + if (rs_priv->dbg_fixed.rate_n_flags) { if (index < 12) mcs->rate_n_flags = rs_priv->dbg_fixed.rate_n_flags; else - mcs->rate_n_flags = cck_rate; + mcs->rate_n_flags = base_rate; IWL_DEBUG_RATE("Fixed rate ON\n"); return; } diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index b50d20267c8..557deebca1b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -35,9 +35,7 @@ #include <linux/netdevice.h> #include <linux/wireless.h> #include <net/mac80211.h> -#include <linux/netdevice.h> #include <linux/etherdevice.h> -#include <linux/delay.h> #define IWL 4965 diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 75e3b5c3f15..83019d1d7cc 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -48,8 +48,6 @@ #include <linux/netdevice.h> #include <linux/wireless.h> #include <linux/firmware.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/if_arp.h> @@ -1749,21 +1747,22 @@ static void iwl_unset_hw_setting(struct iwl_priv *priv) * return : set the bit for each supported rate insert in ie */ static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate, - u16 basic_rate, int max_count) + u16 basic_rate, int *left) { u16 ret_rates = 0, bit; int i; - u8 *rates; - - rates = &(ie[1]); + u8 *cnt = ie; + u8 *rates = ie + 1; for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) { if (bit & supported_rate) { ret_rates |= bit; - rates[*ie] = iwl_rates[i].ieee | - ((bit & basic_rate) ? 0x80 : 0x00); - *ie = *ie + 1; - if (*ie >= max_count) + rates[*cnt] = iwl_rates[i].ieee | + ((bit & basic_rate) ? 0x80 : 0x00); + (*cnt)++; + (*left)--; + if ((*left <= 0) || + (*cnt >= IWL_SUPPORTED_RATES_IE_LEN)) break; } } @@ -1780,7 +1779,7 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, { int len = 0; u8 *pos = NULL; - u16 ret_rates; + u16 active_rates, ret_rates, cck_rates; /* Make sure there is enough space for the probe request, * two mandatory IEs and the data */ @@ -1825,19 +1824,27 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, left -= 2; if (left < 0) return 0; + /* ... fill it in... */ *pos++ = WLAN_EID_SUPP_RATES; *pos = 0; - ret_rates = priv->active_rate = priv->rates_mask; + + priv->active_rate = priv->rates_mask; + active_rates = priv->active_rate; priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK; - iwl_supported_rate_to_ie(pos, priv->active_rate, - priv->active_rate_basic, left); + cck_rates = IWL_CCK_RATES_MASK & active_rates; + ret_rates = iwl_supported_rate_to_ie(pos, cck_rates, + priv->active_rate_basic, &left); + active_rates &= ~ret_rates; + + ret_rates = iwl_supported_rate_to_ie(pos, active_rates, + priv->active_rate_basic, &left); + active_rates &= ~ret_rates; + len += 2 + *pos; pos += (*pos) + 1; - ret_rates = ~ret_rates & priv->active_rate; - - if (ret_rates == 0) + if (active_rates == 0) goto fill_end; /* fill in supported extended rate */ @@ -1848,7 +1855,8 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, /* ... fill it in... */ *pos++ = WLAN_EID_EXT_SUPP_RATES; *pos = 0; - iwl_supported_rate_to_ie(pos, ret_rates, priv->active_rate_basic, left); + iwl_supported_rate_to_ie(pos, active_rates, + priv->active_rate_basic, &left); if (*pos > 0) len += 2 + *pos; diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index b1a6e39f782..5e1279263b2 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -48,8 +48,6 @@ #include <linux/netdevice.h> #include <linux/wireless.h> #include <linux/firmware.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/if_arp.h> @@ -1802,21 +1800,22 @@ static void iwl_unset_hw_setting(struct iwl_priv *priv) * return : set the bit for each supported rate insert in ie */ static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate, - u16 basic_rate, int max_count) + u16 basic_rate, int *left) { u16 ret_rates = 0, bit; int i; - u8 *rates; - - rates = &(ie[1]); + u8 *cnt = ie; + u8 *rates = ie + 1; for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) { if (bit & supported_rate) { ret_rates |= bit; - rates[*ie] = iwl_rates[i].ieee | - ((bit & basic_rate) ? 0x80 : 0x00); - *ie = *ie + 1; - if (*ie >= max_count) + rates[*cnt] = iwl_rates[i].ieee | + ((bit & basic_rate) ? 0x80 : 0x00); + (*cnt)++; + (*left)--; + if ((*left <= 0) || + (*cnt >= IWL_SUPPORTED_RATES_IE_LEN)) break; } } @@ -1839,7 +1838,7 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, { int len = 0; u8 *pos = NULL; - u16 ret_rates; + u16 active_rates, ret_rates, cck_rates; /* Make sure there is enough space for the probe request, * two mandatory IEs and the data */ @@ -1884,19 +1883,27 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, left -= 2; if (left < 0) return 0; + /* ... fill it in... */ *pos++ = WLAN_EID_SUPP_RATES; *pos = 0; - ret_rates = priv->active_rate = priv->rates_mask; + + priv->active_rate = priv->rates_mask; + active_rates = priv->active_rate; priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK; - iwl_supported_rate_to_ie(pos, priv->active_rate, - priv->active_rate_basic, left); + cck_rates = IWL_CCK_RATES_MASK & active_rates; + ret_rates = iwl_supported_rate_to_ie(pos, cck_rates, + priv->active_rate_basic, &left); + active_rates &= ~ret_rates; + + ret_rates = iwl_supported_rate_to_ie(pos, active_rates, + priv->active_rate_basic, &left); + active_rates &= ~ret_rates; + len += 2 + *pos; pos += (*pos) + 1; - ret_rates = ~ret_rates & priv->active_rate; - - if (ret_rates == 0) + if (active_rates == 0) goto fill_end; /* fill in supported extended rate */ @@ -1907,7 +1914,8 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, /* ... fill it in... */ *pos++ = WLAN_EID_EXT_SUPP_RATES; *pos = 0; - iwl_supported_rate_to_ie(pos, ret_rates, priv->active_rate_basic, left); + iwl_supported_rate_to_ie(pos, active_rates, + priv->active_rate_basic, &left); if (*pos > 0) len += 2 + *pos; @@ -4494,13 +4502,13 @@ static u8 ratio2dB[100] = { * Conversion assumes that levels are voltages (20*log), not powers (10*log). */ int iwl_calc_db_from_ratio(int sig_ratio) { - /* Anything above 1000:1 just report as 60 dB */ - if (sig_ratio > 1000) + /* 1000:1 or higher just report as 60 dB */ + if (sig_ratio >= 1000) return 60; - /* Above 100:1, divide by 10 and use table, + /* 100:1 or higher, divide by 10 and use table, * add 20 dB to make up for divide by 10 */ - if (sig_ratio > 100) + if (sig_ratio >= 100) return (20 + (int)ratio2dB[sig_ratio/10]); /* We shouldn't see this */ diff --git a/drivers/net/wireless/iwlwifi/iwlwifi.h b/drivers/net/wireless/iwlwifi/iwlwifi.h index e0b97c34121..432ce887807 100644 --- a/drivers/net/wireless/iwlwifi/iwlwifi.h +++ b/drivers/net/wireless/iwlwifi/iwlwifi.h @@ -39,18 +39,13 @@ struct iwl_priv; /* Hardware specific file defines the PCI IDs table for that hardware module */ extern struct pci_device_id iwl_hw_card_ids[]; +#include "iwl-hw.h" #if IWL == 3945 - #define DRV_NAME "iwl3945" -#include "iwl-hw.h" #include "iwl-3945-hw.h" - #elif IWL == 4965 - #define DRV_NAME "iwl4965" -#include "iwl-hw.h" #include "iwl-4965-hw.h" - #endif #include "iwl-prph.h" diff --git a/drivers/net/wireless/p54common.c b/drivers/net/wireless/p54common.c index 2c63cf0ad2c..1437db0cf4b 100644 --- a/drivers/net/wireless/p54common.c +++ b/drivers/net/wireless/p54common.c @@ -577,7 +577,7 @@ static int p54_set_filter(struct ieee80211_hw *dev, u16 filter_type, struct p54_tx_control_filter *filter; hdr = kzalloc(sizeof(*hdr) + sizeof(*filter) + - priv->tx_hdr_len, GFP_KERNEL); + priv->tx_hdr_len, GFP_ATOMIC); if (!hdr) return -ENOMEM; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index bb6f46cfbb9..ff399f8083e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -550,7 +550,7 @@ void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, /* * Check if we need to set the Length Extension */ - if (bitrate == 110 && residual <= 3) + if (bitrate == 110 && residual <= 30) desc.service |= 0x80; } diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 3e42759473c..46c8c0840a6 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2029,6 +2029,7 @@ static struct usb_device_id rt73usb_device_table[] = { { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) }, /* Billionton */ { USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) }, /* Buffalo */ diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 0ef887dd286..de61c8fe649 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -131,7 +131,8 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb, struct rtl8187_tx_hdr *hdr; struct rtl8187_tx_info *info; struct urb *urb; - u32 tmp; + __le16 rts_dur = 0; + u32 flags; urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { @@ -139,24 +140,24 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb, return 0; } - hdr = (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr)); - tmp = skb->len - sizeof(*hdr); - tmp |= RTL8187_TX_FLAG_NO_ENCRYPT; - tmp |= control->rts_cts_rate << 19; - tmp |= control->tx_rate << 24; - if (ieee80211_get_morefrag((struct ieee80211_hdr *)skb)) - tmp |= RTL8187_TX_FLAG_MORE_FRAG; + flags = skb->len; + flags |= RTL8187_TX_FLAG_NO_ENCRYPT; + flags |= control->rts_cts_rate << 19; + flags |= control->tx_rate << 24; + if (ieee80211_get_morefrag((struct ieee80211_hdr *)skb->data)) + flags |= RTL8187_TX_FLAG_MORE_FRAG; if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) { - tmp |= RTL8187_TX_FLAG_RTS; - hdr->rts_duration = - ieee80211_rts_duration(dev, priv->if_id, skb->len, control); + flags |= RTL8187_TX_FLAG_RTS; + rts_dur = ieee80211_rts_duration(dev, priv->if_id, skb->len, control); } if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) - tmp |= RTL8187_TX_FLAG_CTS; - hdr->flags = cpu_to_le32(tmp); + flags |= RTL8187_TX_FLAG_CTS; + + hdr = (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr)); + hdr->flags = cpu_to_le32(flags); hdr->len = 0; - tmp = control->retry_limit << 8; - hdr->retry = cpu_to_le32(tmp); + hdr->rts_duration = rts_dur; + hdr->retry = cpu_to_le32(control->retry_limit << 8); info = (struct rtl8187_tx_info *)skb->cb; info->control = kmemdup(control, sizeof(*control), GFP_ATOMIC); @@ -587,8 +588,6 @@ static void rtl8187_configure_filter(struct ieee80211_hw *dev, *total_flags = 0; - if (changed_flags & FIF_PROMISC_IN_BSS) - priv->rx_conf ^= RTL818X_RX_CONF_NICMAC; if (changed_flags & FIF_ALLMULTI) priv->rx_conf ^= RTL818X_RX_CONF_MULTICAST; if (changed_flags & FIF_FCSFAIL) @@ -601,8 +600,6 @@ static void rtl8187_configure_filter(struct ieee80211_hw *dev, if (mc_count > 0) priv->rx_conf |= RTL818X_RX_CONF_MULTICAST; - if (priv->rx_conf & RTL818X_RX_CONF_NICMAC) - *total_flags |= FIF_PROMISC_IN_BSS; if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST) *total_flags |= FIF_ALLMULTI; if (priv->rx_conf & RTL818X_RX_CONF_FCS) diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c index 935b144d9b5..d5c0c66188c 100644 --- a/drivers/net/wireless/zd1201.c +++ b/drivers/net/wireless/zd1201.c @@ -327,8 +327,8 @@ static void zd1201_usbrx(struct urb *urb) memcpy(skb_put(skb, 6), &data[datalen-8], 6); memcpy(skb_put(skb, 2), &data[datalen-24], 2); memcpy(skb_put(skb, len), data, len); - skb->dev->last_rx = jiffies; skb->protocol = eth_type_trans(skb, zd->dev); + skb->dev->last_rx = jiffies; zd->stats.rx_packets++; zd->stats.rx_bytes += skb->len; netif_rx(skb); @@ -384,8 +384,8 @@ static void zd1201_usbrx(struct urb *urb) memcpy(skb_put(skb, 2), &data[6], 2); memcpy(skb_put(skb, len), data+8, len); } - skb->dev->last_rx = jiffies; skb->protocol = eth_type_trans(skb, zd->dev); + skb->dev->last_rx = jiffies; zd->stats.rx_packets++; zd->stats.rx_bytes += skb->len; netif_rx(skb); diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index b0684f96576..c755b692381 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -1044,14 +1044,17 @@ error: static void disconnect(struct usb_interface *intf) { struct net_device *netdev = zd_intf_to_netdev(intf); - struct zd_mac *mac = zd_netdev_mac(netdev); - struct zd_usb *usb = &mac->chip.usb; + struct zd_mac *mac; + struct zd_usb *usb; /* Either something really bad happened, or we're just dealing with * a DEVICE_INSTALLER. */ if (netdev == NULL) return; + mac = zd_netdev_mac(netdev); + usb = &mac->chip.usb; + dev_dbg_f(zd_usb_dev(usb), "\n"); zd_netdev_disconnect(netdev); diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c index a2d08c9ba3c..ff999ff0b62 100644 --- a/drivers/s390/net/qeth_main.c +++ b/drivers/s390/net/qeth_main.c @@ -6643,7 +6643,8 @@ qeth_netdev_init(struct net_device *dev) dev->vlan_rx_kill_vid = qeth_vlan_rx_kill_vid; dev->vlan_rx_add_vid = qeth_vlan_rx_add_vid; #endif - dev->header_ops = &qeth_null_ops; + if (qeth_get_netdev_flags(card) & IFF_NOARP) + dev->header_ops = &qeth_null_ops; #ifdef CONFIG_QETH_IPV6 /*IPv6 address autoconfiguration stuff*/ |