diff options
Diffstat (limited to 'drivers')
53 files changed, 366 insertions, 245 deletions
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index a8634a0655f..d9b8af763e1 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -63,6 +63,7 @@ ACPI_MODULE_NAME("processor_idle"); #define ACPI_PROCESSOR_FILE_POWER "power" #define US_TO_PM_TIMER_TICKS(t) ((t * (PM_TIMER_FREQUENCY/1000)) / 1000) +#define PM_TIMER_TICK_NS (1000000000ULL/PM_TIMER_FREQUENCY) #define C2_OVERHEAD 4 /* 1us (3.579 ticks per us) */ #define C3_OVERHEAD 4 /* 1us (3.579 ticks per us) */ static void (*pm_idle_save) (void) __read_mostly; @@ -462,6 +463,9 @@ static void acpi_processor_idle(void) * TBD: Can't get time duration while in C1, as resumes * go to an ISR rather than here. Need to instrument * base interrupt handler. + * + * Note: the TSC better not stop in C1, sched_clock() will + * skew otherwise. */ sleep_ticks = 0xFFFFFFFF; break; @@ -469,6 +473,8 @@ static void acpi_processor_idle(void) case ACPI_STATE_C2: /* Get start time (ticks) */ t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); + /* Tell the scheduler that we are going deep-idle: */ + sched_clock_idle_sleep_event(); /* Invoke C2 */ acpi_state_timer_broadcast(pr, cx, 1); acpi_cstate_enter(cx); @@ -479,17 +485,22 @@ static void acpi_processor_idle(void) /* TSC halts in C2, so notify users */ mark_tsc_unstable("possible TSC halt in C2"); #endif + /* Compute time (ticks) that we were actually asleep */ + sleep_ticks = ticks_elapsed(t1, t2); + + /* Tell the scheduler how much we idled: */ + sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS); + /* Re-enable interrupts */ local_irq_enable(); + /* Do not account our idle-switching overhead: */ + sleep_ticks -= cx->latency_ticks + C2_OVERHEAD; + current_thread_info()->status |= TS_POLLING; - /* Compute time (ticks) that we were actually asleep */ - sleep_ticks = - ticks_elapsed(t1, t2) - cx->latency_ticks - C2_OVERHEAD; acpi_state_timer_broadcast(pr, cx, 0); break; case ACPI_STATE_C3: - /* * disable bus master * bm_check implies we need ARB_DIS @@ -518,6 +529,8 @@ static void acpi_processor_idle(void) t1 = inl(acpi_gbl_FADT.xpm_timer_block.address); /* Invoke C3 */ acpi_state_timer_broadcast(pr, cx, 1); + /* Tell the scheduler that we are going deep-idle: */ + sched_clock_idle_sleep_event(); acpi_cstate_enter(cx); /* Get end time (ticks) */ t2 = inl(acpi_gbl_FADT.xpm_timer_block.address); @@ -531,12 +544,17 @@ static void acpi_processor_idle(void) /* TSC halts in C3, so notify users */ mark_tsc_unstable("TSC halts in C3"); #endif + /* Compute time (ticks) that we were actually asleep */ + sleep_ticks = ticks_elapsed(t1, t2); + /* Tell the scheduler how much we idled: */ + sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS); + /* Re-enable interrupts */ local_irq_enable(); + /* Do not account our idle-switching overhead: */ + sleep_ticks -= cx->latency_ticks + C3_OVERHEAD; + current_thread_info()->status |= TS_POLLING; - /* Compute time (ticks) that we were actually asleep */ - sleep_ticks = - ticks_elapsed(t1, t2) - cx->latency_ticks - C3_OVERHEAD; acpi_state_timer_broadcast(pr, cx, 0); break; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 99d4fbffb0d..2ad4dda6d4a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3700,11 +3700,16 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags) goto fail; /* verify n_sectors hasn't changed */ - if (dev->class == ATA_DEV_ATA && dev->n_sectors != n_sectors) { + if (dev->class == ATA_DEV_ATA && n_sectors && + dev->n_sectors != n_sectors) { ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch " "%llu != %llu\n", (unsigned long long)n_sectors, (unsigned long long)dev->n_sectors); + + /* restore original n_sectors */ + dev->n_sectors = n_sectors; + rc = -ENODEV; goto fail; } diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 430673be1df..7225124d96c 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -587,7 +587,7 @@ static int it821x_port_start(struct ata_port *ap) itdev->want[1][1] = ATA_ANY; itdev->last_device = -1; - if (pdev->revision == 0x11) { + if (pdev->revision == 0x10) { itdev->timing10 = 1; /* Need to disable ATAPI DMA for this case */ if (!itdev->smart) diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index 69a5aa4949f..e3245b36269 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -563,13 +563,13 @@ static long pdc_read_counter(struct ata_host *host) u32 bccrl, bccrh, bccrlv, bccrhv; retry: - bccrl = readl(mmio_base + PDC_BYTE_COUNT) & 0xffff; - bccrh = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff; + bccrl = readl(mmio_base + PDC_BYTE_COUNT) & 0x7fff; + bccrh = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff; rmb(); /* Read the counter values again for verification */ - bccrlv = readl(mmio_base + PDC_BYTE_COUNT) & 0xffff; - bccrhv = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff; + bccrlv = readl(mmio_base + PDC_BYTE_COUNT) & 0x7fff; + bccrhv = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff; rmb(); counter = (bccrh << 15) | bccrl; @@ -692,16 +692,16 @@ static long pdc_detect_pll_input_clock(struct ata_host *host) struct timeval start_time, end_time; long pll_clock, usec_elapsed; - /* Read current counter value */ - start_count = pdc_read_counter(host); - do_gettimeofday(&start_time); - /* Start the test mode */ scr = readl(mmio_base + PDC_SYS_CTL); PDPRINTK("scr[%X]\n", scr); writel(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL); readl(mmio_base + PDC_SYS_CTL); /* flush */ + /* Read current counter value */ + start_count = pdc_read_counter(host); + do_gettimeofday(&start_time); + /* Let the counter run for 100 ms. */ mdelay(100); @@ -719,7 +719,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host) usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 + (end_time.tv_usec - start_time.tv_usec); - pll_clock = (start_count - end_count) / 100 * + pll_clock = ((start_count - end_count) & 0x3fffffff) / 100 * (100000000 / usec_elapsed); PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count); diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 66bd0e83ac0..2bd7645f1a8 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -54,6 +54,7 @@ struct sis_laptop { static const struct sis_laptop sis_laptop[] = { /* devid, subvendor, subdev */ { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ + { 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */ /* end marker */ { 0, } }; diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index f645fe22cd1..ea18e33f50e 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -63,7 +63,7 @@ #include <linux/dmi.h> #define DRV_NAME "pata_via" -#define DRV_VERSION "0.3.1" +#define DRV_VERSION "0.3.2" /* * The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx @@ -144,6 +144,9 @@ static int via_cable_override(struct pci_dev *pdev) /* Systems by DMI */ if (dmi_check_system(cable_dmi_table)) return 1; + /* Arima W730-K8/Targa Visionary 811/... */ + if (pdev->subsystem_vendor == 0x161F && pdev->subsystem_device == 0x2032) + return 1; return 0; } diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 51ea93cab6c..9c867cf6de6 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -2063,8 +2063,7 @@ static int init_dev(struct tty_driver *driver, int idx, } if (!*tp_loc) { - tp = (struct ktermios *) kmalloc(sizeof(struct ktermios), - GFP_KERNEL); + tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL); if (!tp) goto free_mem_out; *tp = driver->init_termios; @@ -2094,8 +2093,7 @@ static int init_dev(struct tty_driver *driver, int idx, } if (!*o_tp_loc) { - o_tp = (struct ktermios *) - kmalloc(sizeof(struct ktermios), GFP_KERNEL); + o_tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL); if (!o_tp) goto free_mem_out; *o_tp = driver->other->init_termios; diff --git a/drivers/lguest/Kconfig b/drivers/lguest/Kconfig index fd6925f4164..41e2250613a 100644 --- a/drivers/lguest/Kconfig +++ b/drivers/lguest/Kconfig @@ -1,6 +1,6 @@ config LGUEST tristate "Linux hypervisor example code" - depends on X86 && PARAVIRT && EXPERIMENTAL && !X86_PAE + depends on X86 && PARAVIRT && EXPERIMENTAL && !X86_PAE && FUTEX select LGUEST_GUEST select HVC_DRIVER ---help--- diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c index 02a0ea6e1c1..6bf858a436c 100644 --- a/drivers/media/dvb/b2c2/flexcop-i2c.c +++ b/drivers/media/dvb/b2c2/flexcop-i2c.c @@ -135,6 +135,13 @@ static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs struct flexcop_device *fc = i2c_get_adapdata(i2c_adap); int i, ret = 0; + /* Some drivers use 1 byte or 0 byte reads as probes, which this + * driver doesn't support. These probes will always fail, so this + * hack makes them always succeed. If one knew how, it would of + * course be better to actually do the read. */ + if (num == 1 && msgs[0].flags == I2C_M_RD && msgs[0].len <= 1) + return 1; + if (mutex_lock_interruptible(&fc->i2c_mutex)) return -ERESTARTSYS; diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c index acf026342ec..bdd797071cb 100644 --- a/drivers/media/dvb/dvb-core/dvb_net.c +++ b/drivers/media/dvb/dvb-core/dvb_net.c @@ -800,7 +800,8 @@ static int dvb_net_ts_callback(const u8 *buffer1, size_t buffer1_len, } -static void dvb_net_sec(struct net_device *dev, u8 *pkt, int pkt_len) +static void dvb_net_sec(struct net_device *dev, const u8 *pkt, int +pkt_len) { u8 *eth; struct sk_buff *skb; @@ -902,7 +903,7 @@ static int dvb_net_sec_callback(const u8 *buffer1, size_t buffer1_len, * we rely on the DVB API definition where exactly one complete * section is delivered in buffer1 */ - dvb_net_sec (dev, (u8*) buffer1, buffer1_len); + dvb_net_sec (dev, buffer1, buffer1_len); return 0; } diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 2c7b158ce7e..40307f3f6fe 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1772,6 +1772,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, if (dev->alt_max_pkt_size == NULL) { em28xx_errdev("out of memory!\n"); em28xx_devused&=~(1<<nr); + kfree(dev); return -ENOMEM; } diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index 9c0e8d18c2f..3d81966d8c4 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -1196,12 +1196,19 @@ static int pwc_video_open(struct inode *inode, struct file *file) return 0; } + +static void pwc_cleanup(struct pwc_device *pdev) +{ + pwc_remove_sysfs_files(pdev->vdev); + video_unregister_device(pdev->vdev); +} + /* Note that all cleanup is done in the reverse order as in _open */ static int pwc_video_close(struct inode *inode, struct file *file) { struct video_device *vdev = file->private_data; struct pwc_device *pdev; - int i; + int i, hint; PWC_DEBUG_OPEN(">> video_close called(vdev = 0x%p).\n", vdev); @@ -1224,8 +1231,9 @@ static int pwc_video_close(struct inode *inode, struct file *file) pwc_isoc_cleanup(pdev); pwc_free_buffers(pdev); + lock_kernel(); /* Turn off LEDS and power down camera, but only when not unplugged */ - if (pdev->error_status != EPIPE) { + if (!pdev->unplugged) { /* Turn LEDs off */ if (pwc_set_leds(pdev, 0, 0) < 0) PWC_DEBUG_MODULE("Failed to set LED on/off time.\n"); @@ -1234,9 +1242,19 @@ static int pwc_video_close(struct inode *inode, struct file *file) if (i < 0) PWC_ERROR("Failed to power down camera (%d)\n", i); } + pdev->vopen--; + PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", i); + } else { + pwc_cleanup(pdev); + /* Free memory (don't set pdev to 0 just yet) */ + kfree(pdev); + /* search device_hint[] table if we occupy a slot, by any chance */ + for (hint = 0; hint < MAX_DEV_HINTS; hint++) + if (device_hint[hint].pdev == pdev) + device_hint[hint].pdev = NULL; } - pdev->vopen--; - PWC_DEBUG_OPEN("<< video_close() vopen=%d\n", pdev->vopen); + unlock_kernel(); + return 0; } @@ -1791,21 +1809,21 @@ static void usb_pwc_disconnect(struct usb_interface *intf) /* Alert waiting processes */ wake_up_interruptible(&pdev->frameq); /* Wait until device is closed */ - while (pdev->vopen) - schedule(); - /* Device is now closed, so we can safely unregister it */ - PWC_DEBUG_PROBE("Unregistering video device in disconnect().\n"); - pwc_remove_sysfs_files(pdev->vdev); - video_unregister_device(pdev->vdev); - - /* Free memory (don't set pdev to 0 just yet) */ - kfree(pdev); + if(pdev->vopen) { + pdev->unplugged = 1; + } else { + /* Device is closed, so we can safely unregister it */ + PWC_DEBUG_PROBE("Unregistering video device in disconnect().\n"); + pwc_cleanup(pdev); + /* Free memory (don't set pdev to 0 just yet) */ + kfree(pdev); disconnect_out: - /* search device_hint[] table if we occupy a slot, by any chance */ - for (hint = 0; hint < MAX_DEV_HINTS; hint++) - if (device_hint[hint].pdev == pdev) - device_hint[hint].pdev = NULL; + /* search device_hint[] table if we occupy a slot, by any chance */ + for (hint = 0; hint < MAX_DEV_HINTS; hint++) + if (device_hint[hint].pdev == pdev) + device_hint[hint].pdev = NULL; + } unlock_kernel(); } diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h index 910a04f5392..8e8e5b27e77 100644 --- a/drivers/media/video/pwc/pwc.h +++ b/drivers/media/video/pwc/pwc.h @@ -193,6 +193,7 @@ struct pwc_device char vsnapshot; /* snapshot mode */ char vsync; /* used by isoc handler */ char vmirror; /* for ToUCaM series */ + char unplugged; int cmd_len; unsigned char cmd_buf[13]; diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index fe0e785ed7d..817a79462b3 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -186,12 +186,10 @@ struct mmc_card *mmc_alloc_card(struct mmc_host *host) { struct mmc_card *card; - card = kmalloc(sizeof(struct mmc_card), GFP_KERNEL); + card = kzalloc(sizeof(struct mmc_card), GFP_KERNEL); if (!card) return ERR_PTR(-ENOMEM); - memset(card, 0, sizeof(struct mmc_card)); - card->host = host; device_initialize(&card->dev); diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 6a7e2984960..2c7ce8f43a9 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -58,12 +58,10 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) { struct mmc_host *host; - host = kmalloc(sizeof(struct mmc_host) + extra, GFP_KERNEL); + host = kzalloc(sizeof(struct mmc_host) + extra, GFP_KERNEL); if (!host) return NULL; - memset(host, 0, sizeof(struct mmc_host) + extra); - host->parent = dev; host->class_dev.parent = dev; host->class_dev.class = &mmc_host_class; diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index f2bc87ac24f..20a7d89e01b 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -385,6 +385,9 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) BUG_ON(data->blksz > host->mmc->max_blk_size); BUG_ON(data->blocks > 65535); + host->data = data; + host->data_early = 0; + /* timeout in us */ target_timeout = data->timeout_ns / 1000 + data->timeout_clks / host->clock; @@ -443,11 +446,11 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host, { u16 mode; - WARN_ON(host->data); - if (data == NULL) return; + WARN_ON(!host->data); + mode = SDHCI_TRNS_BLK_CNT_EN; if (data->blocks > 1) mode |= SDHCI_TRNS_MULTI; @@ -477,8 +480,8 @@ static void sdhci_finish_data(struct sdhci_host *host) /* * Controller doesn't count down when in single block mode. */ - if ((data->blocks == 1) && (data->error == MMC_ERR_NONE)) - blocks = 0; + if (data->blocks == 1) + blocks = (data->error == MMC_ERR_NONE) ? 0 : 1; else blocks = readw(host->ioaddr + SDHCI_BLOCK_COUNT); data->bytes_xfered = data->blksz * (data->blocks - blocks); @@ -600,9 +603,10 @@ static void sdhci_finish_command(struct sdhci_host *host) host->cmd->error = MMC_ERR_NONE; - if (host->cmd->data) - host->data = host->cmd->data; - else + if (host->data && host->data_early) + sdhci_finish_data(host); + + if (!host->cmd->data) tasklet_schedule(&host->finish_tasklet); host->cmd = NULL; @@ -929,9 +933,9 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask) BUG_ON(intmask == 0); if (!host->cmd) { - printk(KERN_ERR "%s: Got command interrupt even though no " - "command operation was in progress.\n", - mmc_hostname(host->mmc)); + printk(KERN_ERR "%s: Got command interrupt 0x%08x even " + "though no command operation was in progress.\n", + mmc_hostname(host->mmc), (unsigned)intmask); sdhci_dumpregs(host); return; } @@ -961,9 +965,9 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) if (intmask & SDHCI_INT_DATA_END) return; - printk(KERN_ERR "%s: Got data interrupt even though no " - "data operation was in progress.\n", - mmc_hostname(host->mmc)); + printk(KERN_ERR "%s: Got data interrupt 0x%08x even " + "though no data operation was in progress.\n", + mmc_hostname(host->mmc), (unsigned)intmask); sdhci_dumpregs(host); return; @@ -991,8 +995,18 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) writel(readl(host->ioaddr + SDHCI_DMA_ADDRESS), host->ioaddr + SDHCI_DMA_ADDRESS); - if (intmask & SDHCI_INT_DATA_END) - sdhci_finish_data(host); + if (intmask & SDHCI_INT_DATA_END) { + if (host->cmd) { + /* + * Data managed to finish before the + * command completed. Make sure we do + * things in the proper order. + */ + host->data_early = 1; + } else { + sdhci_finish_data(host); + } + } } } @@ -1347,12 +1361,11 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) */ mmc->max_blk_size = (caps & SDHCI_MAX_BLOCK_MASK) >> SDHCI_MAX_BLOCK_SHIFT; if (mmc->max_blk_size >= 3) { - printk(KERN_ERR "%s: Invalid maximum block size.\n", + printk(KERN_WARNING "%s: Invalid maximum block size, assuming 512\n", host->slot_descr); - ret = -ENODEV; - goto unmap; - } - mmc->max_blk_size = 512 << mmc->max_blk_size; + mmc->max_blk_size = 512; + } else + mmc->max_blk_size = 512 << mmc->max_blk_size; /* * Maximum block count. diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index d157776c114..e28987d6d2e 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -182,6 +182,7 @@ struct sdhci_host { struct mmc_request *mrq; /* Current request */ struct mmc_command *cmd; /* Current command */ struct mmc_data *data; /* Current data request */ + int data_early:1; /* Data finished before cmd */ struct scatterlist *cur_sg; /* We're working on this */ int num_sg; /* Entries left */ diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c index 79ff6b4de3a..37d72f123a8 100644 --- a/drivers/pci/hotplug/cpqphp_ctrl.c +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -1746,10 +1746,8 @@ static void pushbutton_helper_thread(unsigned long data) static int event_thread(void* data) { struct controller *ctrl; - lock_kernel(); + daemonize("phpd_event"); - - unlock_kernel(); while (1) { dbg("!!!!event_thread sleeping\n"); diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index c6e132d7c0f..4c36e80f6d2 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -5,12 +5,7 @@ extern int pci_uevent(struct device *dev, char **envp, int num_envp, extern int pci_create_sysfs_dev_files(struct pci_dev *pdev); extern void pci_remove_sysfs_dev_files(struct pci_dev *pdev); extern void pci_cleanup_rom(struct pci_dev *dev); -extern int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, - resource_size_t size, resource_size_t align, - resource_size_t min, unsigned int type_mask, - void (*alignf)(void *, struct resource *, - resource_size_t, resource_size_t), - void *alignf_data); + /* Firmware callbacks */ extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state); extern int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t state); @@ -35,7 +30,6 @@ static inline int pci_proc_detach_bus(struct pci_bus *bus) { return 0; } /* Functions for PCI Hotplug drivers to use */ extern unsigned int pci_do_scan_bus(struct pci_bus *bus); -extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap); extern void pci_remove_legacy_files(struct pci_bus *bus); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 34b8dae0d90..27e00b2d7b5 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -653,20 +653,20 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass sprintf(child->name, (is_cardbus ? "PCI CardBus #%02x" : "PCI Bus #%02x"), child->number); + /* Has only triggered on CardBus, fixup is in yenta_socket */ while (bus->parent) { if ((child->subordinate > bus->subordinate) || (child->number > bus->subordinate) || (child->number < bus->number) || (child->subordinate < bus->number)) { - printk(KERN_WARNING "PCI: Bus #%02x (-#%02x) is " - "hidden behind%s bridge #%02x (-#%02x)%s\n", - child->number, child->subordinate, - bus->self->transparent ? " transparent" : " ", - bus->number, bus->subordinate, - pcibios_assign_all_busses() ? " " : - " (try 'pci=assign-busses')"); - printk(KERN_WARNING "Please report the result to " - "<bk@suse.de> to fix this permanently\n"); + pr_debug("PCI: Bus #%02x (-#%02x) is %s" + "hidden behind%s bridge #%02x (-#%02x)\n", + child->number, child->subordinate, + (bus->number > child->subordinate && + bus->subordinate < child->number) ? + "wholly " : " partially", + bus->self->transparent ? " transparent" : " ", + bus->number, bus->subordinate); } bus = bus->parent; } diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index c559085c89a..2d40f437b9f 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -947,7 +947,7 @@ static void k8t_sound_hostbridge(struct pci_dev *dev) unsigned char val; pci_read_config_byte(dev, 0x50, &val); - if (val == 0x88 || val == 0xc8) { + if (val == 0xc8) { /* Assume it's probably a MSI-K8T-Neo2Fir */ printk(KERN_INFO "PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON\n"); pci_write_config_byte(dev, 0x50, val & (~0x40)); @@ -1485,7 +1485,7 @@ static void __devinit quirk_e100_interrupt(struct pci_dev *dev) iounmap(csr); } -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, quirk_e100_interrupt); static void __devinit fixup_rev1_53c810(struct pci_dev* dev) { @@ -1650,6 +1650,9 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCN DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000_PCIX, quirk_disable_all_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RD580, quirk_disable_all_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RX790, quirk_disable_all_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS690, quirk_disable_all_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi); /* Disable MSI on chipsets that are known to not support it */ diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 63436892688..7580aa5da0f 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -21,6 +21,7 @@ config USB_ARCH_HAS_HCD default y if USB_ARCH_HAS_EHCI default y if PCMCIA && !M32R # sl811_cs default y if ARM # SL-811 + default y if SUPERH # r8a66597-hcd default PCI # many non-PCI SOC chips embed OHCI diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 02c52f8d5db..a73e714288e 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -456,7 +456,6 @@ static int cxacru_start_wait_urb(struct urb *urb, struct completion *done, int* actual_length) { struct timer_list timer; - int status = urb->status; init_timer(&timer); timer.expires = jiffies + msecs_to_jiffies(CMD_TIMEOUT); @@ -468,7 +467,7 @@ static int cxacru_start_wait_urb(struct urb *urb, struct completion *done, if (actual_length) *actual_length = urb->actual_length; - return status; + return urb->status; /* must read status after completion */ } static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm, diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index a1a1c9d467e..29807d048b0 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -1721,9 +1721,12 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf, ret = uea_boot(sc); if (ret < 0) - goto error; + goto error_rm_grp; return 0; + +error_rm_grp: + sysfs_remove_group(&intf->dev.kobj, &attr_grp); error: kfree(sc); return ret; diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index fe940e0536e..f51e22490ed 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -921,6 +921,10 @@ skip_normal_probe: return -EINVAL; } } + + /* Accept probe requests only for the control interface */ + if (intf != control_interface) + return -ENODEV; if (usb_interface_claimed(data_interface)) { /* valid in this context */ dev_dbg(&intf->dev,"The data interface isn't available"); @@ -1109,10 +1113,12 @@ static void acm_disconnect(struct usb_interface *intf) return; } if (acm->country_codes){ - device_remove_file(&intf->dev, &dev_attr_wCountryCodes); - device_remove_file(&intf->dev, &dev_attr_iCountryCodeRelDate); + device_remove_file(&acm->control->dev, + &dev_attr_wCountryCodes); + device_remove_file(&acm->control->dev, + &dev_attr_iCountryCodeRelDate); } - device_remove_file(&intf->dev, &dev_attr_bmCapabilities); + device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities); acm->dev = NULL; usb_set_intfdata(acm->control, NULL); usb_set_intfdata(acm->data, NULL); diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 654857493a8..a1ad11d0c47 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1224,6 +1224,8 @@ static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt) udev->auto_pm = 1; udev->pm_usage_cnt += inc_usage_cnt; WARN_ON(udev->pm_usage_cnt < 0); + if (inc_usage_cnt) + udev->last_busy = jiffies; if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) { if (udev->state == USB_STATE_SUSPENDED) status = usb_resume_both(udev); @@ -1232,8 +1234,6 @@ static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt) else if (inc_usage_cnt) udev->last_busy = jiffies; } else if (inc_usage_cnt <= 0 && udev->pm_usage_cnt <= 0) { - if (inc_usage_cnt) - udev->last_busy = jiffies; status = usb_suspend_both(udev, PMSG_SUSPEND); } usb_pm_unlock(udev); @@ -1342,16 +1342,15 @@ static int usb_autopm_do_interface(struct usb_interface *intf, else { udev->auto_pm = 1; intf->pm_usage_cnt += inc_usage_cnt; + udev->last_busy = jiffies; if (inc_usage_cnt >= 0 && intf->pm_usage_cnt > 0) { if (udev->state == USB_STATE_SUSPENDED) status = usb_resume_both(udev); if (status != 0) intf->pm_usage_cnt -= inc_usage_cnt; - else if (inc_usage_cnt) + else udev->last_busy = jiffies; } else if (inc_usage_cnt <= 0 && intf->pm_usage_cnt <= 0) { - if (inc_usage_cnt) - udev->last_busy = jiffies; status = usb_suspend_both(udev, PMSG_SUSPEND); } } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index e341a1da517..f7b337feb3e 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1644,9 +1644,10 @@ static int finish_port_resume(struct usb_device *udev) * and device drivers will know about any resume quirks. */ if (status == 0) { + devstatus = 0; status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus); if (status >= 0) - status = (status == 2 ? 0 : -ENODEV); + status = (status > 0 ? 0 : -ENODEV); } if (status) { diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index b6bd05e3d43..d8f7b089a8f 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -637,12 +637,12 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type, unsigned char memset(buf,0,size); // Make sure we parse really received data for (i = 0; i < 3; ++i) { - /* retry on length 0 or stall; some devices are flakey */ + /* retry on length 0 or error; some devices are flakey */ result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, (type << 8) + index, 0, buf, size, USB_CTRL_GET_TIMEOUT); - if (result == 0 || result == -EPIPE) + if (result <= 0 && result != -ETIMEDOUT) continue; if (result > 1 && ((u8 *)buf)[1] != type) { result = -EPROTO; @@ -1358,6 +1358,30 @@ static int usb_if_uevent(struct device *dev, char **envp, int num_envp, usb_dev = interface_to_usbdev(intf); alt = intf->cur_altsetting; +#ifdef CONFIG_USB_DEVICEFS + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "DEVICE=/proc/bus/usb/%03d/%03d", + usb_dev->bus->busnum, usb_dev->devnum)) + return -ENOMEM; +#endif + + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "PRODUCT=%x/%x/%x", + le16_to_cpu(usb_dev->descriptor.idVendor), + le16_to_cpu(usb_dev->descriptor.idProduct), + le16_to_cpu(usb_dev->descriptor.bcdDevice))) + return -ENOMEM; + + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "TYPE=%d/%d/%d", + usb_dev->descriptor.bDeviceClass, + usb_dev->descriptor.bDeviceSubClass, + usb_dev->descriptor.bDeviceProtocol)) + return -ENOMEM; + if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, "INTERFACE=%d/%d/%d", diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index b7917c5a3c6..9e467118dc9 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -30,6 +30,8 @@ static const struct usb_device_id usb_quirk_list[] = { /* HP 5300/5370C scanner */ { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, + /* Hewlett-Packard PhotoSmart 720 / PhotoSmart 935 (storage) */ + { USB_DEVICE(0x03f0, 0x4002), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Acer Peripherals Inc. (now BenQ Corp.) Prisa 640BU */ { USB_DEVICE(0x04a5, 0x207e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Benq S2W 3300U */ @@ -56,6 +58,8 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04b8, 0x0121), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Seiko Epson Corp.*/ { USB_DEVICE(0x04b8, 0x0122), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* Samsung ML-2010 printer */ + { USB_DEVICE(0x04e8, 0x326c), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Samsung ML-2510 Series printer */ { USB_DEVICE(0x04e8, 0x327e), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Elsa MicroLink 56k (V.250) */ @@ -64,12 +68,20 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x05d8, 0x4005), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Agfa Snapscan1212u */ { USB_DEVICE(0x06bd, 0x2061), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* Seagate RSS LLC */ + { USB_DEVICE(0x0bc2, 0x3000), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Umax [hex] Astra 3400U */ { USB_DEVICE(0x1606, 0x0060), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, /* Philips PSC805 audio device */ { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Alcor multi-card reader */ + { USB_DEVICE(0x058f, 0x6366), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + + /* Canon EOS 5D in PC Connection mode */ + { USB_DEVICE(0x04a9, 0x3101), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, + /* RIM Blackberry */ { USB_DEVICE(0x0fca, 0x0001), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, { USB_DEVICE(0x0fca, 0x0004), .driver_info = USB_QUIRK_NO_AUTOSUSPEND }, diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index f2fbdc7fe37..d008d1360a7 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -34,8 +34,6 @@ * bypassing some hardware (and driver) issues. UML could help too. */ -#define DEBUG - #include <linux/module.h> #include <linux/kernel.h> #include <linux/delay.h> diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index be7a1bd2823..965ad7bec7b 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -599,7 +599,6 @@ enum fsg_buffer_state { struct fsg_buffhd { void *buf; - dma_addr_t dma; enum fsg_buffer_state state; struct fsg_buffhd *next; @@ -1295,6 +1294,7 @@ static int class_setup_req(struct fsg_dev *fsg, struct usb_request *req = fsg->ep0req; int value = -EOPNOTSUPP; u16 w_index = le16_to_cpu(ctrl->wIndex); + u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); if (!fsg->config) @@ -1308,7 +1308,7 @@ static int class_setup_req(struct fsg_dev *fsg, if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != 0) { + if (w_index != 0 || w_value != 0) { value = -EDOM; break; } @@ -1324,7 +1324,7 @@ static int class_setup_req(struct fsg_dev *fsg, if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != 0) { + if (w_index != 0 || w_value != 0) { value = -EDOM; break; } @@ -1343,7 +1343,7 @@ static int class_setup_req(struct fsg_dev *fsg, if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) break; - if (w_index != 0) { + if (w_index != 0 || w_value != 0) { value = -EDOM; break; } @@ -2611,7 +2611,6 @@ static int send_status(struct fsg_dev *fsg) fsg->intr_buffhd = bh; // Point to the right buffhd fsg->intreq->buf = bh->inreq->buf; - fsg->intreq->dma = bh->inreq->dma; fsg->intreq->context = bh; start_transfer(fsg, fsg->intr_in, fsg->intreq, &fsg->intreq_busy, &bh->state); @@ -3200,7 +3199,6 @@ reset: if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0) goto reset; bh->inreq->buf = bh->outreq->buf = bh->buf; - bh->inreq->dma = bh->outreq->dma = bh->dma; bh->inreq->context = bh->outreq->context = bh; bh->inreq->complete = bulk_in_complete; bh->outreq->complete = bulk_out_complete; diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index 10b2b33b869..d57bcfbc08a 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -1277,31 +1277,32 @@ static void setup_received_irq(struct fsl_udc *udc, udc_reset_ep_queue(udc, 0); + /* We process some stardard setup requests here */ switch (setup->bRequest) { - /* Request that need Data+Status phase from udc */ case USB_REQ_GET_STATUS: - if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_STANDARD)) + /* Data+Status phase from udc */ + if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK)) != (USB_DIR_IN | USB_TYPE_STANDARD)) break; ch9getstatus(udc, setup->bRequestType, wValue, wIndex, wLength); - break; + return; - /* Requests that need Status phase from udc */ case USB_REQ_SET_ADDRESS: + /* Status phase from udc */ if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE)) break; ch9setaddress(udc, wValue, wIndex, wLength); - break; + return; - /* Handled by udc, no data, status by udc */ case USB_REQ_CLEAR_FEATURE: case USB_REQ_SET_FEATURE: - { /* status transaction */ + /* Status phase from udc */ + { int rc = -EOPNOTSUPP; - if ((setup->bRequestType & USB_RECIP_MASK) - == USB_RECIP_ENDPOINT) { + if ((setup->bRequestType & (USB_RECIP_MASK | USB_TYPE_MASK)) + == (USB_RECIP_ENDPOINT | USB_TYPE_STANDARD)) { int pipe = get_pipe_by_windex(wIndex); struct fsl_ep *ep; @@ -1315,8 +1316,9 @@ static void setup_received_irq(struct fsl_udc *udc, ? 1 : 0); spin_lock(&udc->lock); - } else if ((setup->bRequestType & USB_RECIP_MASK) - == USB_RECIP_DEVICE) { + } else if ((setup->bRequestType & (USB_RECIP_MASK + | USB_TYPE_MASK)) == (USB_RECIP_DEVICE + | USB_TYPE_STANDARD)) { /* Note: The driver has not include OTG support yet. * This will be set when OTG support is added */ if (!udc->gadget.is_otg) @@ -1329,39 +1331,42 @@ static void setup_received_irq(struct fsl_udc *udc, USB_DEVICE_A_ALT_HNP_SUPPORT) udc->gadget.a_alt_hnp_support = 1; rc = 0; - } + } else + break; + if (rc == 0) { if (ep0_prime_status(udc, EP_DIR_IN)) ep0stall(udc); } - break; + return; } - /* Requests handled by gadget */ - default: - if (wLength) { - /* Data phase from gadget, status phase from udc */ - udc->ep0_dir = (setup->bRequestType & USB_DIR_IN) - ? USB_DIR_IN : USB_DIR_OUT; - spin_unlock(&udc->lock); - if (udc->driver->setup(&udc->gadget, - &udc->local_setup_buff) < 0) - ep0stall(udc); - spin_lock(&udc->lock); - udc->ep0_state = (setup->bRequestType & USB_DIR_IN) - ? DATA_STATE_XMIT : DATA_STATE_RECV; - } else { - /* No data phase, IN status from gadget */ - udc->ep0_dir = USB_DIR_IN; - spin_unlock(&udc->lock); - if (udc->driver->setup(&udc->gadget, - &udc->local_setup_buff) < 0) - ep0stall(udc); - spin_lock(&udc->lock); - udc->ep0_state = WAIT_FOR_OUT_STATUS; - } + default: break; } + + /* Requests handled by gadget */ + if (wLength) { + /* Data phase from gadget, status phase from udc */ + udc->ep0_dir = (setup->bRequestType & USB_DIR_IN) + ? USB_DIR_IN : USB_DIR_OUT; + spin_unlock(&udc->lock); + if (udc->driver->setup(&udc->gadget, + &udc->local_setup_buff) < 0) + ep0stall(udc); + spin_lock(&udc->lock); + udc->ep0_state = (setup->bRequestType & USB_DIR_IN) + ? DATA_STATE_XMIT : DATA_STATE_RECV; + } else { + /* No data phase, IN status from gadget */ + udc->ep0_dir = USB_DIR_IN; + spin_unlock(&udc->lock); + if (udc->driver->setup(&udc->gadget, + &udc->local_setup_buff) < 0) + ep0stall(udc); + spin_lock(&udc->lock); + udc->ep0_state = WAIT_FOR_OUT_STATUS; + } } /* Process request for Data or Status phase of ep0 diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index 72b4ebbf132..1407ad1c812 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -967,7 +967,7 @@ static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active) udc = container_of(_gadget, struct pxa2xx_udc, gadget); /* not all boards support pullup control */ - if (!udc->mach->udc_command) + if (!udc->mach->gpio_pullup && !udc->mach->udc_command) return -EOPNOTSUPP; is_active = (is_active != 0); @@ -2309,7 +2309,7 @@ static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state) { struct pxa2xx_udc *udc = platform_get_drvdata(dev); - if (!udc->mach->udc_command) + if (!udc->mach->gpio_pullup && !udc->mach->udc_command) WARN("USB host won't detect disconnect!\n"); pullup(udc, 0); diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2f529828c74..565d6ef4c4c 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -237,7 +237,7 @@ config USB_SL811_CS module will be called "sl811_cs". config USB_R8A66597_HCD - tristate "R8A66597 HCD suppoort" + tristate "R8A66597 HCD support" depends on USB help The R8A66597 is a USB 2.0 host and peripheral controller. diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index 5d1b12aad77..b1d19268cb2 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -1,8 +1,6 @@ /* * EHCI HCD (Host Controller Driver) for USB. * - * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net> - * * Bus Glue for AMD Alchemy Au1xxx * * Based on "ohci-au1xxx.c" by Matt Porter <mporter@kernel.crashing.org> @@ -196,6 +194,9 @@ static const struct hc_driver ehci_au1xxx_hc_driver = { /* * basic lifecycle operations + * + * FIXME -- ehci_init() doesn't do enough here. + * See ehci-ppc-soc for a complete implementation. */ .reset = ehci_init, .start = ehci_run, diff --git a/drivers/usb/host/ehci-ppc-soc.c b/drivers/usb/host/ehci-ppc-soc.c index c2cedb09ed8..4f99b0eb27b 100644 --- a/drivers/usb/host/ehci-ppc-soc.c +++ b/drivers/usb/host/ehci-ppc-soc.c @@ -6,7 +6,7 @@ * Bus Glue for PPC On-Chip EHCI driver * Tested on AMCC 440EPx * - * Based on "ehci-au12xx.c" by David Brownell <dbrownell@users.sourceforge.net> + * Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@amd.com> * * This file is licenced under the GPL. */ @@ -15,6 +15,24 @@ extern int usb_disabled(void); +/* called during probe() after chip reset completes */ +static int ehci_ppc_soc_setup(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + + retval = ehci_halt(ehci); + if (retval) + return retval; + + retval = ehci_init(hcd); + if (retval) + return retval; + + ehci->sbrn = 0x20; + return ehci_reset(ehci); +} + /** * usb_ehci_ppc_soc_probe - initialize PPC-SoC-based HCDs * Context: !in_interrupt() @@ -120,7 +138,7 @@ static const struct hc_driver ehci_ppc_soc_hc_driver = { /* * basic lifecycle operations */ - .reset = ehci_init, + .reset = ehci_ppc_soc_setup, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 6f9e43e9a6c..f61c6cdd06f 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -74,7 +74,7 @@ urb_print (struct urb * urb, char * str, int small) #define ohci_dbg_sw(ohci, next, size, format, arg...) \ do { \ - if (next) { \ + if (next != NULL) { \ unsigned s_len; \ s_len = scnprintf (*next, *size, format, ## arg ); \ *size -= s_len; *next += s_len; \ diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index d60f1985320..40a1de4c256 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2208,8 +2208,6 @@ static int __init r8a66597_probe(struct platform_device *pdev) clean_up: if (reg) iounmap(reg); - if (res) - release_mem_region(res->start, 1); return ret; } diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 7f765ec038c..b88eb3c62c0 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -1520,12 +1520,15 @@ static void u132_hcd_endp_work_scheduler(struct work_struct *work) } } } +#ifdef CONFIG_PM static void port_power(struct u132 *u132, int pn, int is_on) { u132->port[pn].power = is_on; } +#endif + static void u132_power(struct u132 *u132, int is_on) { struct usb_hcd *hcd = u132_to_hcd(u132) diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c index cff6fd190a2..77bb893bf2e 100644 --- a/drivers/usb/serial/airprime.c +++ b/drivers/usb/serial/airprime.c @@ -18,7 +18,6 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */ - { USB_DEVICE(0x413c, 0x8115) }, /* Dell Wireless HSDPA 5500 */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c index e67ce25f751..86724e88570 100644 --- a/drivers/usb/serial/belkin_sa.c +++ b/drivers/usb/serial/belkin_sa.c @@ -383,6 +383,10 @@ static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios } baud = tty_get_baud_rate(port->tty); + if (baud == 0) { + dbg("%s - tty_get_baud_rate says 0 baud", __FUNCTION__); + return; + } urb_value = BELKIN_SA_BAUD(baud); /* Clip to maximum speed */ if (urb_value == 0) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7b1673a4407..1370c423d7c 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -538,6 +538,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) }, { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, + { USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) }, + { USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index d9e49716db1..c70e1de6389 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -430,6 +430,9 @@ */ #define EVOLUTION_VID 0xDEEE /* Vendor ID */ #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ +#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ +#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ +#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ /* Pyramid Computer GmbH */ #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index 04bd3b7a298..f1c90cfe725 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1,7 +1,7 @@ /* * Garmin GPS driver * - * Copyright (C) 2006 Hermann Kneissel herkne@users.sourceforge.net + * Copyright (C) 2006,2007 Hermann Kneissel herkne@users.sourceforge.net * * The latest version of the driver can be found at * http://sourceforge.net/projects/garmin-gps/ @@ -34,6 +34,7 @@ #include <linux/module.h> #include <linux/spinlock.h> #include <asm/uaccess.h> +#include <asm/atomic.h> #include <linux/usb.h> #include <linux/usb/serial.h> @@ -52,7 +53,7 @@ static int debug = 0; */ #define VERSION_MAJOR 0 -#define VERSION_MINOR 28 +#define VERSION_MINOR 31 #define _STR(s) #s #define _DRIVER_VERSION(a,b) "v" _STR(a) "." _STR(b) @@ -141,6 +142,8 @@ struct garmin_data { __u8 inbuffer [GPS_IN_BUFSIZ]; /* tty -> usb */ __u8 outbuffer[GPS_OUT_BUFSIZ]; /* usb -> tty */ __u8 privpkt[4*6]; + atomic_t req_count; + atomic_t resp_count; spinlock_t lock; struct list_head pktlist; }; @@ -171,8 +174,6 @@ struct garmin_data { #define CLEAR_HALT_REQUIRED 0x0001 #define FLAGS_QUEUING 0x0100 -#define FLAGS_APP_RESP_SEEN 0x0200 -#define FLAGS_APP_REQ_SEEN 0x0400 #define FLAGS_DROP_DATA 0x0800 #define FLAGS_GSP_SKIP 0x1000 @@ -186,7 +187,8 @@ struct garmin_data { /* function prototypes */ static void gsp_next_packet(struct garmin_data * garmin_data_p); static int garmin_write_bulk(struct usb_serial_port *port, - const unsigned char *buf, int count); + const unsigned char *buf, int count, + int dismiss_ack); /* some special packets to be send or received */ static unsigned char const GARMIN_START_SESSION_REQ[] @@ -233,9 +235,7 @@ static struct usb_driver garmin_driver = { static inline int noResponseFromAppLayer(struct garmin_data * garmin_data_p) { - return ((garmin_data_p->flags - & (FLAGS_APP_REQ_SEEN|FLAGS_APP_RESP_SEEN)) - == FLAGS_APP_REQ_SEEN); + return atomic_read(&garmin_data_p->req_count) == atomic_read(&garmin_data_p->resp_count); } @@ -463,7 +463,7 @@ static int gsp_rec_packet(struct garmin_data * garmin_data_p, int count) usbdata[2] = __cpu_to_le32(size); garmin_write_bulk (garmin_data_p->port, garmin_data_p->inbuffer, - GARMIN_PKTHDR_LENGTH+size); + GARMIN_PKTHDR_LENGTH+size, 0); /* if this was an abort-transfer command, flush all queued data. */ @@ -818,7 +818,7 @@ static int nat_receive(struct garmin_data * garmin_data_p, if (garmin_data_p->insize >= len) { garmin_write_bulk (garmin_data_p->port, garmin_data_p->inbuffer, - len); + len, 0); garmin_data_p->insize = 0; /* if this was an abort-transfer command, @@ -893,10 +893,11 @@ static int garmin_clear(struct garmin_data * garmin_data_p) struct usb_serial_port *port = garmin_data_p->port; - if (port != NULL && garmin_data_p->flags & FLAGS_APP_RESP_SEEN) { + if (port != NULL && atomic_read(&garmin_data_p->resp_count)) { /* send a terminate command */ status = garmin_write_bulk(port, GARMIN_STOP_TRANSFER_REQ, - sizeof(GARMIN_STOP_TRANSFER_REQ)); + sizeof(GARMIN_STOP_TRANSFER_REQ), + 1); } /* flush all queued data */ @@ -939,7 +940,8 @@ static int garmin_init_session(struct usb_serial_port *port) dbg("%s - starting session ...", __FUNCTION__); garmin_data_p->state = STATE_ACTIVE; status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ, - sizeof(GARMIN_START_SESSION_REQ)); + sizeof(GARMIN_START_SESSION_REQ), + 0); if (status >= 0) { @@ -950,7 +952,8 @@ static int garmin_init_session(struct usb_serial_port *port) /* not needed, but the win32 driver does it too ... */ status = garmin_write_bulk(port, GARMIN_START_SESSION_REQ2, - sizeof(GARMIN_START_SESSION_REQ2)); + sizeof(GARMIN_START_SESSION_REQ2), + 0); if (status >= 0) { status = 0; spin_lock_irqsave(&garmin_data_p->lock, flags); @@ -987,6 +990,8 @@ static int garmin_open (struct usb_serial_port *port, struct file *filp) garmin_data_p->mode = initial_mode; garmin_data_p->count = 0; garmin_data_p->flags = 0; + atomic_set(&garmin_data_p->req_count, 0); + atomic_set(&garmin_data_p->resp_count, 0); spin_unlock_irqrestore(&garmin_data_p->lock, flags); /* shutdown any bulk reads that might be going on */ @@ -1035,28 +1040,39 @@ static void garmin_write_bulk_callback (struct urb *urb) { unsigned long flags; struct usb_serial_port *port = (struct usb_serial_port *)urb->context; - struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); int status = urb->status; - /* free up the transfer buffer, as usb_free_urb() does not do this */ - kfree (urb->transfer_buffer); + if (port) { + struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); - dbg("%s - port %d", __FUNCTION__, port->number); + dbg("%s - port %d", __FUNCTION__, port->number); - if (status) { - dbg("%s - nonzero write bulk status received: %d", - __FUNCTION__, status); - spin_lock_irqsave(&garmin_data_p->lock, flags); - garmin_data_p->flags |= CLEAR_HALT_REQUIRED; - spin_unlock_irqrestore(&garmin_data_p->lock, flags); + if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer) + && (garmin_data_p->mode == MODE_GARMIN_SERIAL)) { + gsp_send_ack(garmin_data_p, ((__u8 *)urb->transfer_buffer)[4]); + } + + if (status) { + dbg("%s - nonzero write bulk status received: %d", + __FUNCTION__, urb->status); + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags |= CLEAR_HALT_REQUIRED; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + } + + usb_serial_port_softint(port); } - usb_serial_port_softint(port); + /* Ignore errors that resulted from garmin_write_bulk with dismiss_ack=1 */ + + /* free up the transfer buffer, as usb_free_urb() does not do this */ + kfree (urb->transfer_buffer); } static int garmin_write_bulk (struct usb_serial_port *port, - const unsigned char *buf, int count) + const unsigned char *buf, int count, + int dismiss_ack) { unsigned long flags; struct usb_serial *serial = port->serial; @@ -1093,13 +1109,12 @@ static int garmin_write_bulk (struct usb_serial_port *port, usb_sndbulkpipe (serial->dev, port->bulk_out_endpointAddress), buffer, count, - garmin_write_bulk_callback, port); + garmin_write_bulk_callback, + dismiss_ack ? NULL : port); urb->transfer_flags |= URB_ZERO_PACKET; if (GARMIN_LAYERID_APPL == getLayerId(buffer)) { - spin_lock_irqsave(&garmin_data_p->lock, flags); - garmin_data_p->flags |= FLAGS_APP_REQ_SEEN; - spin_unlock_irqrestore(&garmin_data_p->lock, flags); + atomic_inc(&garmin_data_p->req_count); if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { pkt_clear(garmin_data_p); garmin_data_p->state = STATE_GSP_WAIT_DATA; @@ -1114,13 +1129,6 @@ static int garmin_write_bulk (struct usb_serial_port *port, "failed with status = %d\n", __FUNCTION__, status); count = status; - } else { - - if (GARMIN_LAYERID_APPL == getLayerId(buffer) - && (garmin_data_p->mode == MODE_GARMIN_SERIAL)) { - - gsp_send_ack(garmin_data_p, buffer[4]); - } } /* we are done with this urb, so let the host driver @@ -1135,7 +1143,6 @@ static int garmin_write_bulk (struct usb_serial_port *port, static int garmin_write (struct usb_serial_port *port, const unsigned char *buf, int count) { - unsigned long flags; int pktid, pktsiz, len; struct garmin_data * garmin_data_p = usb_get_serial_port_data(port); __le32 *privpkt = (__le32 *)garmin_data_p->privpkt; @@ -1186,9 +1193,7 @@ static int garmin_write (struct usb_serial_port *port, break; case PRIV_PKTID_RESET_REQ: - spin_lock_irqsave(&garmin_data_p->lock, flags); - garmin_data_p->flags |= FLAGS_APP_REQ_SEEN; - spin_unlock_irqrestore(&garmin_data_p->lock, flags); + atomic_inc(&garmin_data_p->req_count); break; case PRIV_PKTID_SET_DEF_MODE: @@ -1241,8 +1246,6 @@ static int garmin_chars_in_buffer (struct usb_serial_port *port) static void garmin_read_process(struct garmin_data * garmin_data_p, unsigned char *data, unsigned data_length) { - unsigned long flags; - if (garmin_data_p->flags & FLAGS_DROP_DATA) { /* abort-transfer cmd is actice */ dbg("%s - pkt dropped", __FUNCTION__); @@ -1254,9 +1257,7 @@ static void garmin_read_process(struct garmin_data * garmin_data_p, the device */ if (0 == memcmp(data, GARMIN_APP_LAYER_REPLY, sizeof(GARMIN_APP_LAYER_REPLY))) { - spin_lock_irqsave(&garmin_data_p->lock, flags); - garmin_data_p->flags |= FLAGS_APP_RESP_SEEN; - spin_unlock_irqrestore(&garmin_data_p->lock, flags); + atomic_inc(&garmin_data_p->resp_count); } /* if throttling is active or postprecessing is required diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 0455c1552ae..6a3a704b584 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -545,6 +545,7 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */ { USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */ { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */ + { USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC smartphone modems */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 84c12b5f127..4cb3c165742 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -110,6 +110,7 @@ static int option_send_setup(struct usb_serial_port *port); #define HUAWEI_PRODUCT_E220 0x1003 #define NOVATELWIRELESS_VENDOR_ID 0x1410 +#define DELL_VENDOR_ID 0x413C #define ANYDATA_VENDOR_ID 0x16d5 #define ANYDATA_PRODUCT_ADU_E100A 0x6501 @@ -119,8 +120,6 @@ static int option_send_setup(struct usb_serial_port *port); #define BANDRICH_PRODUCT_C100_1 0x1002 #define BANDRICH_PRODUCT_C100_2 0x1003 -#define DELL_VENDOR_ID 0x413C - static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -171,11 +170,16 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2110) }, /* Novatel Merlin ES620 / Merlin ES720 / Ovation U720 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8117) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8128) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, - { USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index d7db71eca52..833ada47fc5 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -818,19 +818,17 @@ static int oti6858_ioctl(struct usb_serial_port *port, struct file *file, switch (cmd) { case TCGETS: - if (copy_to_user(user_arg, port->tty->termios, - sizeof(struct ktermios))) { + if (kernel_termios_to_user_termios((struct ktermios __user *)arg, + port->tty->termios)) return -EFAULT; - } return 0; case TCSETS: case TCSETSW: /* FIXME: this is not the same! */ case TCSETSF: /* FIXME: this is not the same! */ - if (copy_from_user(port->tty->termios, user_arg, - sizeof(struct ktermios))) { + if (user_termios_to_kernel_termios(port->tty->termios, + (struct ktermios __user *)arg)) return -EFAULT; - } oti6858_set_termios(port, NULL); return 0; diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c index 86899d55d8d..51669b7622b 100644 --- a/drivers/usb/serial/safe_serial.c +++ b/drivers/usb/serial/safe_serial.c @@ -74,13 +74,13 @@ #include <linux/usb/serial.h> -#ifndef CONFIG_USB_SAFE_PADDED -#define CONFIG_USB_SAFE_PADDED 0 +#ifndef CONFIG_USB_SERIAL_SAFE_PADDED +#define CONFIG_USB_SERIAL_SAFE_PADDED 0 #endif static int debug; static int safe = 1; -static int padded = CONFIG_USB_SAFE_PADDED; +static int padded = CONFIG_USB_SERIAL_SAFE_PADDED; #define DRIVER_VERSION "v0.0b" #define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com" diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 7d84a7647e8..30e08c0bcdc 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -104,6 +104,8 @@ static struct usb_device_id id_table [] = { .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(ACER_VENDOR_ID, ACER_S10_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID), .driver_info = (kernel_ulong_t)&palm_os_4_probe }, { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID), diff --git a/drivers/usb/serial/visor.h b/drivers/usb/serial/visor.h index 4ce6f62a6f3..57229cf6647 100644 --- a/drivers/usb/serial/visor.h +++ b/drivers/usb/serial/visor.h @@ -48,6 +48,9 @@ #define SONY_CLIE_UX50_ID 0x0144 #define SONY_CLIE_TJ25_ID 0x0169 +#define ACER_VENDOR_ID 0x0502 +#define ACER_S10_ID 0x0001 + #define SAMSUNG_VENDOR_ID 0x04E8 #define SAMSUNG_SCH_I330_ID 0x8001 #define SAMSUNG_SPH_I500_ID 0x6601 diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index d8d008d4294..2d92ce31018 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -342,7 +342,7 @@ UNUSUAL_DEV( 0x04b0, 0x040d, 0x0100, 0x0100, US_FL_FIX_CAPACITY), /* Reported by Emil Larsson <emil@swip.net> */ -UNUSUAL_DEV( 0x04b0, 0x0411, 0x0100, 0x0100, +UNUSUAL_DEV( 0x04b0, 0x0411, 0x0100, 0x0101, "NIKON", "NIKON DSC D80", US_SC_DEVICE, US_PR_DEVICE, NULL, diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 28842d208bb..25e557d4fe6 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -112,13 +112,6 @@ module_param(delay_use, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device"); -/* These are used to make sure the module doesn't unload before all the - * threads have exited. - */ -static atomic_t total_threads = ATOMIC_INIT(0); -static DECLARE_COMPLETION(threads_gone); - - /* * The entries in this table correspond, line for line, * with the entries of us_unusual_dev_list[]. @@ -879,9 +872,6 @@ static void quiesce_and_remove_host(struct us_data *us) usb_stor_stop_transport(us); wake_up(&us->delay_wait); - /* It doesn't matter if the SCSI-scanning thread is still running. - * The thread will exit when it sees the DISCONNECTING flag. */ - /* queuecommand won't accept any new commands and the control * thread won't execute a previously-queued command. If there * is such a command pending, complete it with an error. */ @@ -891,12 +881,16 @@ static void quiesce_and_remove_host(struct us_data *us) scsi_lock(host); us->srb->scsi_done(us->srb); us->srb = NULL; + complete(&us->notify); /* in case of an abort */ scsi_unlock(host); } mutex_unlock(&us->dev_mutex); /* Now we own no commands so it's safe to remove the SCSI host */ scsi_remove_host(host); + + /* Wait for the SCSI-scanning thread to stop */ + wait_for_completion(&us->scanning_done); } /* Second stage of disconnect processing: deallocate all resources */ @@ -947,9 +941,8 @@ retry: /* Should we unbind if no devices were detected? */ } - scsi_host_put(us_to_host(us)); usb_autopm_put_interface(us->pusb_intf); - complete_and_exit(&threads_gone, 0); + complete_and_exit(&us->scanning_done, 0); } @@ -984,6 +977,7 @@ static int storage_probe(struct usb_interface *intf, init_MUTEX_LOCKED(&(us->sema)); init_completion(&(us->notify)); init_waitqueue_head(&us->delay_wait); + init_completion(&us->scanning_done); /* Associate the us_data structure with the USB device */ result = associate_dev(us, intf); @@ -1033,11 +1027,6 @@ static int storage_probe(struct usb_interface *intf, goto BadDevice; } - /* Take a reference to the host for the scanning thread and - * count it among all the threads we have launched. Then - * start it up. */ - scsi_host_get(us_to_host(us)); - atomic_inc(&total_threads); usb_autopm_get_interface(intf); /* dropped in the scanning thread */ wake_up_process(th); @@ -1104,16 +1093,6 @@ static void __exit usb_stor_exit(void) US_DEBUGP("-- calling usb_deregister()\n"); usb_deregister(&usb_storage_driver) ; - /* Don't return until all of our control and scanning threads - * have exited. Since each thread signals threads_gone as its - * last act, we have to call wait_for_completion the right number - * of times. - */ - while (atomic_read(&total_threads) > 0) { - wait_for_completion(&threads_gone); - atomic_dec(&total_threads); - } - usb_usual_clear_present(USB_US_TYPE_STOR); } diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 6445665b157..8d87503e256 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -150,6 +150,7 @@ struct us_data { struct semaphore sema; /* to sleep thread on */ struct completion notify; /* thread begin/end */ wait_queue_head_t delay_wait; /* wait during scan, reset */ + struct completion scanning_done; /* wait for scan thread */ /* subdriver information */ void *extra; /* Any extra data */ |