diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/wireless/Makefile | 2 | ||||
| -rw-r--r-- | drivers/net/wireless/hermes_dld.c | 338 | ||||
| -rw-r--r-- | drivers/net/wireless/hermes_dld.h | 45 | ||||
| -rw-r--r-- | drivers/net/wireless/spectrum_cs.c | 274 |
4 files changed, 385 insertions, 274 deletions
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index c05fd7627f3..59d2d805f60 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_WAVELAN) += wavelan.o obj-$(CONFIG_PCMCIA_NETWAVE) += netwave_cs.o obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan_cs.o -obj-$(CONFIG_HERMES) += orinoco.o hermes.o +obj-$(CONFIG_HERMES) += orinoco.o hermes.o hermes_dld.o obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o obj-$(CONFIG_APPLE_AIRPORT) += airport.o obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o diff --git a/drivers/net/wireless/hermes_dld.c b/drivers/net/wireless/hermes_dld.c new file mode 100644 index 00000000000..9a8ef3040d5 --- /dev/null +++ b/drivers/net/wireless/hermes_dld.c @@ -0,0 +1,338 @@ +/* + * Hermes download helper driver. + * + * This could be entirely merged into hermes.c. + * + * I'm keeping it separate to minimise the amount of merging between + * kernel upgrades. It also means the memory overhead for drivers that + * don't need firmware download low. + * + * This driver: + * - is capable of writing to the volatile area of the hermes device + * - is currently not capable of writing to non-volatile areas + * - provide helpers to identify and update plugin data + * - is not capable of interpreting a fw image directly. That is up to + * the main card driver. + * - deals with Hermes I devices. It can probably be modified to deal + * with Hermes II devices + * + * Copyright (C) 2007, David Kilroy + * + * Plug data code slightly modified from spectrum_cs driver + * Copyright (C) 2002-2005 Pavel Roskin <proski@gnu.org> + * Portions based on information in wl_lkm_718 Agere driver + * COPYRIGHT (C) 2001-2004 by Agere Systems Inc. All Rights Reserved + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include "hermes.h" +#include "hermes_dld.h" + +MODULE_DESCRIPTION("Download helper for Lucent Hermes chipset"); +MODULE_AUTHOR("David Kilroy <kilroyd@gmail.com>"); +MODULE_LICENSE("Dual MPL/GPL"); + +#define PFX "hermes_dld: " + +/* + * AUX port access. To unlock the AUX port write the access keys to the + * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL + * register. Then read it and make sure it's HERMES_AUX_ENABLED. + */ +#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ +#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ +#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ + +#define HERMES_AUX_PW0 0xFE01 +#define HERMES_AUX_PW1 0xDC23 +#define HERMES_AUX_PW2 0xBA45 + +/* End markers */ +#define PDI_END 0x00000000 /* End of PDA */ +#define BLOCK_END 0xFFFFFFFF /* Last image block */ + +/* + * The following structures have little-endian fields denoted by + * the leading underscore. Don't access them directly - use inline + * functions defined below. + */ + +/* + * The binary image to be downloaded consists of series of data blocks. + * Each block has the following structure. + */ +struct dblock { + __le32 addr; /* adapter address where to write the block */ + __le16 len; /* length of the data only, in bytes */ + char data[0]; /* data to be written */ +} __attribute__ ((packed)); + +/* + * Plug Data References are located in in the image after the last data + * block. They refer to areas in the adapter memory where the plug data + * items with matching ID should be written. + */ +struct pdr { + __le32 id; /* record ID */ + __le32 addr; /* adapter address where to write the data */ + __le32 len; /* expected length of the data, in bytes */ + char next[0]; /* next PDR starts here */ +} __attribute__ ((packed)); + +/* + * Plug Data Items are located in the EEPROM read from the adapter by + * primary firmware. They refer to the device-specific data that should + * be plugged into the secondary firmware. + */ +struct pdi { + __le16 len; /* length of ID and data, in words */ + __le16 id; /* record ID */ + char data[0]; /* plug data */ +} __attribute__ ((packed)); + +/* Functions for access to little-endian data */ +static inline u32 +dblock_addr(const struct dblock *blk) +{ + return le32_to_cpu(blk->addr); +} + +static inline u32 +dblock_len(const struct dblock *blk) +{ + return le16_to_cpu(blk->len); +} + +static inline u32 +pdr_id(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->id); +} + +static inline u32 +pdr_addr(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->addr); +} + +static inline u32 +pdr_len(const struct pdr *pdr) +{ + return le32_to_cpu(pdr->len); +} + +static inline u32 +pdi_id(const struct pdi *pdi) +{ + return le16_to_cpu(pdi->id); +} + +/* Return length of the data only, in bytes */ +static inline u32 +pdi_len(const struct pdi *pdi) +{ + return 2 * (le16_to_cpu(pdi->len) - 1); +} + +/* Set address of the auxiliary port */ +static inline void +spectrum_aux_setaddr(hermes_t *hw, u32 addr) +{ + hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); + hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); +} + +/* Open access to the auxiliary port */ +static int +spectrum_aux_open(hermes_t *hw) +{ + int i; + + /* Already open? */ + if (hermes_read_reg(hw, HERMES_CONTROL) == HERMES_AUX_ENABLED) + return 0; + + hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); + hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); + hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); + hermes_write_reg(hw, HERMES_CONTROL, HERMES_AUX_ENABLE); + + for (i = 0; i < 20; i++) { + udelay(10); + if (hermes_read_reg(hw, HERMES_CONTROL) == + HERMES_AUX_ENABLED) + return 0; + } + + return -EBUSY; +} + +/* + * Scan PDR for the record with the specified RECORD_ID. + * If it's not found, return NULL. + */ +static struct pdr * +spectrum_find_pdr(struct pdr *first_pdr, u32 record_id) +{ + struct pdr *pdr = first_pdr; + + while (pdr_id(pdr) != PDI_END) { + /* + * PDR area is currently not terminated by PDI_END. + * It's followed by CRC records, which have the type + * field where PDR has length. The type can be 0 or 1. + */ + if (pdr_len(pdr) < 2) + return NULL; + + /* If the record ID matches, we are done */ + if (pdr_id(pdr) == record_id) + return pdr; + + pdr = (struct pdr *) pdr->next; + } + return NULL; +} + +/* Process one Plug Data Item - find corresponding PDR and plug it */ +static int +spectrum_plug_pdi(hermes_t *hw, struct pdr *first_pdr, struct pdi *pdi) +{ + struct pdr *pdr; + + /* Find the PDI corresponding to this PDR */ + pdr = spectrum_find_pdr(first_pdr, pdi_id(pdi)); + + /* No match is found, safe to ignore */ + if (!pdr) + return 0; + + /* Lengths of the data in PDI and PDR must match */ + if (pdi_len(pdi) != pdr_len(pdr)) + return -EINVAL; + + /* do the actual plugging */ + spectrum_aux_setaddr(hw, pdr_addr(pdr)); + hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi)); + + return 0; +} + +/* Read PDA from the adapter */ +int +spectrum_read_pda(hermes_t *hw, __le16 *pda, int pda_len) +{ + int ret; + int pda_size; + + /* Issue command to read EEPROM */ + ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); + if (ret) + return ret; + + /* Open auxiliary port */ + ret = spectrum_aux_open(hw); + if (ret) + return ret; + + /* read PDA from EEPROM */ + spectrum_aux_setaddr(hw, PDA_ADDR); + hermes_read_words(hw, HERMES_AUXDATA, pda, pda_len / 2); + + /* Check PDA length */ + pda_size = le16_to_cpu(pda[0]); + if (pda_size > pda_len) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL(spectrum_read_pda); + +/* Parse PDA and write the records into the adapter */ +int +spectrum_apply_pda(hermes_t *hw, const struct dblock *first_block, + __le16 *pda) +{ + int ret; + struct pdi *pdi; + struct pdr *first_pdr; + const struct dblock *blk = first_block; + + /* Skip all blocks to locate Plug Data References */ + while (dblock_addr(blk) != BLOCK_END) + blk = (struct dblock *) &blk->data[dblock_len(blk)]; + + first_pdr = (struct pdr *) blk; + + /* Go through every PDI and plug them into the adapter */ + pdi = (struct pdi *) (pda + 2); + while (pdi_id(pdi) != PDI_END) { + ret = spectrum_plug_pdi(hw, first_pdr, pdi); + if (ret) + return ret; + + /* Increment to the next PDI */ + pdi = (struct pdi *) &pdi->data[pdi_len(pdi)]; + } + return 0; +} +EXPORT_SYMBOL(spectrum_apply_pda); + +/* Load firmware blocks into the adapter */ +int +spectrum_load_blocks(hermes_t *hw, const struct dblock *first_block) +{ + const struct dblock *blk; + u32 blkaddr; + u32 blklen; + + blk = first_block; + blkaddr = dblock_addr(blk); + blklen = dblock_len(blk); + + while (dblock_addr(blk) != BLOCK_END) { + spectrum_aux_setaddr(hw, blkaddr); + hermes_write_bytes(hw, HERMES_AUXDATA, blk->data, + blklen); + + blk = (struct dblock *) &blk->data[blklen]; + blkaddr = dblock_addr(blk); + blklen = dblock_len(blk); + } + return 0; +} +EXPORT_SYMBOL(spectrum_load_blocks); + +static int __init init_hermes_dld(void) +{ + return 0; +} + +static void __exit exit_hermes_dld(void) +{ +} + +module_init(init_hermes_dld); +module_exit(exit_hermes_dld); diff --git a/drivers/net/wireless/hermes_dld.h b/drivers/net/wireless/hermes_dld.h new file mode 100644 index 00000000000..2c8892ac635 --- /dev/null +++ b/drivers/net/wireless/hermes_dld.h @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2007, David Kilroy + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ +#ifndef _HERMES_DLD_H +#define _HERMES_DLD_H + +#include "hermes.h" + +/* Position of PDA in the adapter memory */ +#define EEPROM_ADDR 0x3000 +#define EEPROM_LEN 0x200 +#define PDA_OFFSET 0x100 + +#define PDA_ADDR (EEPROM_ADDR + PDA_OFFSET) +#define PDA_WORDS ((EEPROM_LEN - PDA_OFFSET) / 2) + +struct dblock; + +int spectrum_read_pda(hermes_t *hw, __le16 *pda, int pda_len); +int spectrum_apply_pda(hermes_t *hw, const struct dblock *first_block, + __le16 *pda); +int spectrum_load_blocks(hermes_t *hw, const struct dblock *first_block); + +#endif /* _HERMES_DLD_H */ diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 98df9bc7836..579873d0e8c 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -33,6 +33,7 @@ #include <pcmcia/ds.h> #include "orinoco.h" +#include "hermes_dld.h" static const char primary_fw_name[] = "symbol_sp24t_prim_fw"; static const char secondary_fw_name[] = "symbol_sp24t_sec_fw"; @@ -88,144 +89,9 @@ static void spectrum_cs_release(struct pcmcia_device *link); #define HCR_IDLE 0x0E /* don't run firmware after reset */ #define HCR_MEM16 0x10 /* memory width bit, should be preserved */ -/* - * AUX port access. To unlock the AUX port write the access keys to the - * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL - * register. Then read it and make sure it's HERMES_AUX_ENABLED. - */ -#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ -#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ -#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ - -#define HERMES_AUX_PW0 0xFE01 -#define HERMES_AUX_PW1 0xDC23 -#define HERMES_AUX_PW2 0xBA45 - /* End markers */ -#define PDI_END 0x00000000 /* End of PDA */ -#define BLOCK_END 0xFFFFFFFF /* Last image block */ #define TEXT_END 0x1A /* End of text header */ -/* - * The following structures have little-endian fields denoted by - * the leading underscore. Don't access them directly - use inline - * functions defined below. - */ - -/* - * The binary image to be downloaded consists of series of data blocks. - * Each block has the following structure. - */ -struct dblock { - __le32 addr; /* adapter address where to write the block */ - __le16 len; /* length of the data only, in bytes */ - char data[0]; /* data to be written */ -} __attribute__ ((packed)); - -/* - * Plug Data References are located in in the image after the last data - * block. They refer to areas in the adapter memory where the plug data - * items with matching ID should be written. - */ -struct pdr { - __le32 id; /* record ID */ - __le32 addr; /* adapter address where to write the data */ - __le32 len; /* expected length of the data, in bytes */ - char next[0]; /* next PDR starts here */ -} __attribute__ ((packed)); - - -/* - * Plug Data Items are located in the EEPROM read from the adapter by - * primary firmware. They refer to the device-specific data that should - * be plugged into the secondary firmware. - */ -struct pdi { - __le16 len; /* length of ID and data, in words */ - __le16 id; /* record ID */ - char data[0]; /* plug data */ -} __attribute__ ((packed)); - - -/* Functions for access to little-endian data */ -static inline u32 -dblock_addr(const struct dblock *blk) -{ - return le32_to_cpu(blk->addr); -} - -static inline u32 -dblock_len(const struct dblock *blk) -{ - return le16_to_cpu(blk->len); -} - -static inline u32 -pdr_id(const struct pdr *pdr) -{ - return le32_to_cpu(pdr->id); -} - -static inline u32 -pdr_addr(const struct pdr *pdr) -{ - return le32_to_cpu(pdr->addr); -} - -static inline u32 -pdr_len(const struct pdr *pdr) -{ - return le32_to_cpu(pdr->len); -} - -static inline u32 -pdi_id(const struct pdi *pdi) -{ - return le16_to_cpu(pdi->id); -} - -/* Return length of the data only, in bytes */ -static inline u32 -pdi_len(const struct pdi *pdi) -{ - return 2 * (le16_to_cpu(pdi->len) - 1); -} - - -/* Set address of the auxiliary port */ -static inline void -spectrum_aux_setaddr(hermes_t *hw, u32 addr) -{ - hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); - hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); -} - - -/* Open access to the auxiliary port */ -static int -spectrum_aux_open(hermes_t *hw) -{ - int i; - - /* Already open? */ - if (hermes_read_reg(hw, HERMES_CONTROL) == HERMES_AUX_ENABLED) - return 0; - - hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); - hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); - hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); - hermes_write_reg(hw, HERMES_CONTROL, HERMES_AUX_ENABLE); - - for (i = 0; i < 20; i++) { - udelay(10); - if (hermes_read_reg(hw, HERMES_CONTROL) == - HERMES_AUX_ENABLED) - return 0; - } - - return -EBUSY; -} - #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) @@ -294,144 +160,6 @@ spectrum_reset(struct pcmcia_device *link, int idle) /* - * Scan PDR for the record with the specified RECORD_ID. - * If it's not found, return NULL. - */ -static struct pdr * -spectrum_find_pdr(struct pdr *first_pdr, u32 record_id) -{ - struct pdr *pdr = first_pdr; - - while (pdr_id(pdr) != PDI_END) { - /* - * PDR area is currently not terminated by PDI_END. - * It's followed by CRC records, which have the type - * field where PDR has length. The type can be 0 or 1. - */ - if (pdr_len(pdr) < 2) - return NULL; - - /* If the record ID matches, we are done */ - if (pdr_id(pdr) == record_id) - return pdr; - - pdr = (struct pdr *) pdr->next; - } - return NULL; -} - - -/* Process one Plug Data Item - find corresponding PDR and plug it */ -static int -spectrum_plug_pdi(hermes_t *hw, struct pdr *first_pdr, struct pdi *pdi) -{ - struct pdr *pdr; - - /* Find the PDI corresponding to this PDR */ - pdr = spectrum_find_pdr(first_pdr, pdi_id(pdi)); - - /* No match is found, safe to ignore */ - if (!pdr) - return 0; - - /* Lengths of the data in PDI and PDR must match */ - if (pdi_len(pdi) != pdr_len(pdr)) - return -EINVAL; - - /* do the actual plugging */ - spectrum_aux_setaddr(hw, pdr_addr(pdr)); - hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi)); - - return 0; -} - - -/* Read PDA from the adapter */ -static int -spectrum_read_pda(hermes_t *hw, __le16 *pda, int pda_len) -{ - int ret; - int pda_size; - - /* Issue command to read EEPROM */ - ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); - if (ret) - return ret; - - /* Open auxiliary port */ - ret = spectrum_aux_open(hw); - if (ret) - return ret; - - /* read PDA from EEPROM */ - spectrum_aux_setaddr(hw, PDA_ADDR); - hermes_read_words(hw, HERMES_AUXDATA, pda, pda_len / 2); - - /* Check PDA length */ - pda_size = le16_to_cpu(pda[0]); - if (pda_size > pda_len) - return -EINVAL; - - return 0; -} - - -/* Parse PDA and write the records into the adapter */ -static int -spectrum_apply_pda(hermes_t *hw, const struct dblock *first_block, - __le16 *pda) -{ - int ret; - struct pdi *pdi; - struct pdr *first_pdr; - const struct dblock *blk = first_block; - - /* Skip all blocks to locate Plug Data References */ - while (dblock_addr(blk) != BLOCK_END) - blk = (struct dblock *) &blk->data[dblock_len(blk)]; - - first_pdr = (struct pdr *) blk; - - /* Go through every PDI and plug them into the adapter */ - pdi = (struct pdi *) (pda + 2); - while (pdi_id(pdi) != PDI_END) { - ret = spectrum_plug_pdi(hw, first_pdr, pdi); - if (ret) - return ret; - - /* Increment to the next PDI */ - pdi = (struct pdi *) &pdi->data[pdi_len(pdi)]; - } - return 0; -} - - -/* Load firmware blocks into the adapter */ -static int -spectrum_load_blocks(hermes_t *hw, const struct dblock *first_block) -{ - const struct dblock *blk; - u32 blkaddr; - u32 blklen; - - blk = first_block; - blkaddr = dblock_addr(blk); - blklen = dblock_len(blk); - - while (dblock_addr(blk) != BLOCK_END) { - spectrum_aux_setaddr(hw, blkaddr); - hermes_write_bytes(hw, HERMES_AUXDATA, blk->data, - blklen); - - blk = (struct dblock *) &blk->data[blklen]; - blkaddr = dblock_addr(blk); - blklen = dblock_len(blk); - } - return 0; -} - - -/* * Process a firmware image - stop the card, load the firmware, reset * the card and make sure it responds. For the secondary firmware take * care of the PDA - read it and then write it on top of the firmware. |