aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ide/pci/sl82c105.c71
1 files changed, 66 insertions, 5 deletions
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index fe3b4b91f85..3d7759c361f 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -82,7 +82,14 @@ static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
pio = ide_get_best_pio_mode(drive, pio, 5, &p);
- drive->drive_data = drv_ctrl = get_pio_timings(&p);
+ drv_ctrl = get_pio_timings(&p);
+
+ /*
+ * Store the PIO timings so that we can restore them
+ * in case DMA will be turned off...
+ */
+ drive->drive_data &= 0xffff0000;
+ drive->drive_data |= drv_ctrl;
if (!drive->using_dma) {
/*
@@ -100,14 +107,67 @@ static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
}
/*
+ * Configure the drive and chipset for a new transfer speed.
+ */
+static int sl82c105_tune_chipset(ide_drive_t *drive, u8 speed)
+{
+ static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
+ u16 drv_ctrl;
+
+ DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
+ drive->name, ide_xfer_verbose(speed)));
+
+ speed = ide_rate_filter(drive, speed);
+
+ switch (speed) {
+ case XFER_MW_DMA_2:
+ case XFER_MW_DMA_1:
+ case XFER_MW_DMA_0:
+ drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
+
+ /*
+ * Store the DMA timings so that we can actually program
+ * them when DMA will be turned on...
+ */
+ drive->drive_data &= 0x0000ffff;
+ drive->drive_data |= (unsigned long)drv_ctrl << 16;
+
+ /*
+ * If we are already using DMA, we just reprogram
+ * the drive control register.
+ */
+ if (drive->using_dma) {
+ struct pci_dev *dev = HWIF(drive)->pci_dev;
+ int reg = 0x44 + drive->dn * 4;
+
+ pci_write_config_word(dev, reg, drv_ctrl);
+ }
+ break;
+ case XFER_PIO_5:
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ (void) sl82c105_tune_pio(drive, speed - XFER_PIO_0);
+ break;
+ default:
+ return -1;
+ }
+
+ return ide_config_drive_speed(drive, speed);
+}
+
+/*
* Configure the drive for DMA.
- * We'll program the chipset only when DMA is actually turned on.
*/
static int config_for_dma(ide_drive_t *drive)
{
+ u8 speed = ide_max_dma_mode(drive);
+
DBG(("config_for_dma(drive:%s)\n", drive->name));
- if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0)
+ if (!speed || sl82c105_tune_chipset(drive, speed))
return 0;
return ide_dma_enable(drive);
@@ -219,7 +279,7 @@ static int sl82c105_ide_dma_on(ide_drive_t *drive)
rc = __ide_dma_on(drive);
if (rc == 0) {
- pci_write_config_word(dev, reg, 0x0200);
+ pci_write_config_word(dev, reg, drive->drive_data >> 16);
printk(KERN_INFO "%s: DMA enabled\n", drive->name);
}
@@ -357,6 +417,7 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
hwif->tuneproc = &sl82c105_tune_drive;
+ hwif->speedproc = &sl82c105_tune_chipset;
hwif->selectproc = &sl82c105_selectproc;
hwif->resetproc = &sl82c105_resetproc;
@@ -388,7 +449,7 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
}
hwif->atapi_dma = 1;
- hwif->mwdma_mask = 0x04;
+ hwif->mwdma_mask = 0x07;
hwif->ide_dma_check = &sl82c105_ide_dma_check;
hwif->ide_dma_on = &sl82c105_ide_dma_on;