diff options
Diffstat (limited to 'drivers')
141 files changed, 9016 insertions, 706 deletions
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c index 97991ac6f5f..7e52295f1ec 100644 --- a/drivers/acpi/acpi_pad.c +++ b/drivers/acpi/acpi_pad.c @@ -208,7 +208,7 @@ static int power_saving_thread(void *data) * the mechanism only works when all CPUs have RT task running, * as if one CPU hasn't RT task, RT task from other CPUs will * borrow CPU time from this CPU and cause RT task use > 95% - * CPU time. To make 'avoid staration' work, takes a nap here. + * CPU time. To make 'avoid starvation' work, takes a nap here. */ if (do_sleep) schedule_timeout_killable(HZ * idle_pct / 100); @@ -222,14 +222,18 @@ static struct task_struct *ps_tsks[NR_CPUS]; static unsigned int ps_tsk_num; static int create_power_saving_task(void) { + int rc = -ENOMEM; + ps_tsks[ps_tsk_num] = kthread_run(power_saving_thread, (void *)(unsigned long)ps_tsk_num, "power_saving/%d", ps_tsk_num); - if (ps_tsks[ps_tsk_num]) { + rc = IS_ERR(ps_tsks[ps_tsk_num]) ? PTR_ERR(ps_tsks[ps_tsk_num]) : 0; + if (!rc) ps_tsk_num++; - return 0; - } - return -EINVAL; + else + ps_tsks[ps_tsk_num] = NULL; + + return rc; } static void destroy_power_saving_task(void) @@ -237,6 +241,7 @@ static void destroy_power_saving_task(void) if (ps_tsk_num > 0) { ps_tsk_num--; kthread_stop(ps_tsks[ps_tsk_num]); + ps_tsks[ps_tsk_num] = NULL; } } @@ -253,7 +258,7 @@ static void set_power_saving_task_num(unsigned int num) } } -static int acpi_pad_idle_cpus(unsigned int num_cpus) +static void acpi_pad_idle_cpus(unsigned int num_cpus) { get_online_cpus(); @@ -261,7 +266,6 @@ static int acpi_pad_idle_cpus(unsigned int num_cpus) set_power_saving_task_num(num_cpus); put_online_cpus(); - return 0; } static uint32_t acpi_pad_idle_cpus_num(void) @@ -369,19 +373,21 @@ static void acpi_pad_remove_sysfs(struct acpi_device *device) static int acpi_pad_pur(acpi_handle handle, int *num_cpus) { struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; - acpi_status status; union acpi_object *package; int rev, num, ret = -EINVAL; - status = acpi_evaluate_object(handle, "_PUR", NULL, &buffer); - if (ACPI_FAILURE(status)) + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_PUR", NULL, &buffer))) + return -EINVAL; + + if (!buffer.length || !buffer.pointer) return -EINVAL; + package = buffer.pointer; if (package->type != ACPI_TYPE_PACKAGE || package->package.count != 2) goto out; rev = package->package.elements[0].integer.value; num = package->package.elements[1].integer.value; - if (rev != 1) + if (rev != 1 || num < 0) goto out; *num_cpus = num; ret = 0; @@ -410,7 +416,7 @@ static void acpi_pad_ost(acpi_handle handle, int stat, static void acpi_pad_handle_notify(acpi_handle handle) { - int num_cpus, ret; + int num_cpus; uint32_t idle_cpus; mutex_lock(&isolated_cpus_lock); @@ -418,12 +424,9 @@ static void acpi_pad_handle_notify(acpi_handle handle) mutex_unlock(&isolated_cpus_lock); return; } - ret = acpi_pad_idle_cpus(num_cpus); + acpi_pad_idle_cpus(num_cpus); idle_cpus = acpi_pad_idle_cpus_num(); - if (!ret) - acpi_pad_ost(handle, 0, idle_cpus); - else - acpi_pad_ost(handle, 1, 0); + acpi_pad_ost(handle, 0, idle_cpus); mutex_unlock(&isolated_cpus_lock); } diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index fd1801bdee6..d6471bb6852 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -201,14 +201,13 @@ unlock: spin_unlock_irqrestore(&ec->curr_lock, flags); } -static void acpi_ec_gpe_query(void *ec_cxt); +static int acpi_ec_sync_query(struct acpi_ec *ec); -static int ec_check_sci(struct acpi_ec *ec, u8 state) +static int ec_check_sci_sync(struct acpi_ec *ec, u8 state) { if (state & ACPI_EC_FLAG_SCI) { if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) - return acpi_os_execute(OSL_EC_BURST_HANDLER, - acpi_ec_gpe_query, ec); + return acpi_ec_sync_query(ec); } return 0; } @@ -249,11 +248,6 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, { unsigned long tmp; int ret = 0; - pr_debug(PREFIX "transaction start\n"); - /* disable GPE during transaction if storm is detected */ - if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { - acpi_disable_gpe(NULL, ec->gpe); - } if (EC_FLAGS_MSI) udelay(ACPI_EC_MSI_UDELAY); /* start transaction */ @@ -265,20 +259,9 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); spin_unlock_irqrestore(&ec->curr_lock, tmp); ret = ec_poll(ec); - pr_debug(PREFIX "transaction end\n"); spin_lock_irqsave(&ec->curr_lock, tmp); ec->curr = NULL; spin_unlock_irqrestore(&ec->curr_lock, tmp); - if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { - /* check if we received SCI during transaction */ - ec_check_sci(ec, acpi_ec_read_status(ec)); - /* it is safe to enable GPE outside of transaction */ - acpi_enable_gpe(NULL, ec->gpe); - } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) { - pr_info(PREFIX "GPE storm detected, " - "transactions will use polling mode\n"); - set_bit(EC_FLAGS_GPE_STORM, &ec->flags); - } return ret; } @@ -321,7 +304,26 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) status = -ETIME; goto end; } + pr_debug(PREFIX "transaction start\n"); + /* disable GPE during transaction if storm is detected */ + if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + acpi_disable_gpe(NULL, ec->gpe); + } + status = acpi_ec_transaction_unlocked(ec, t); + + /* check if we received SCI during transaction */ + ec_check_sci_sync(ec, acpi_ec_read_status(ec)); + if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { + msleep(1); + /* it is safe to enable GPE outside of transaction */ + acpi_enable_gpe(NULL, ec->gpe); + } else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) { + pr_info(PREFIX "GPE storm detected, " + "transactions will use polling mode\n"); + set_bit(EC_FLAGS_GPE_STORM, &ec->flags); + } + pr_debug(PREFIX "transaction end\n"); end: if (ec->global_lock) acpi_release_global_lock(glk); @@ -443,7 +445,7 @@ int ec_transaction(u8 command, EXPORT_SYMBOL(ec_transaction); -static int acpi_ec_query(struct acpi_ec *ec, u8 * data) +static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 * data) { int result; u8 d; @@ -452,20 +454,16 @@ static int acpi_ec_query(struct acpi_ec *ec, u8 * data) .wlen = 0, .rlen = 1}; if (!ec || !data) return -EINVAL; - /* * Query the EC to find out which _Qxx method we need to evaluate. * Note that successful completion of the query causes the ACPI_EC_SCI * bit to be cleared (and thus clearing the interrupt source). */ - - result = acpi_ec_transaction(ec, &t); + result = acpi_ec_transaction_unlocked(ec, &t); if (result) return result; - if (!d) return -ENODATA; - *data = d; return 0; } @@ -509,43 +507,79 @@ void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit) EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler); -static void acpi_ec_gpe_query(void *ec_cxt) +static void acpi_ec_run(void *cxt) { - struct acpi_ec *ec = ec_cxt; - u8 value = 0; - struct acpi_ec_query_handler *handler, copy; - - if (!ec || acpi_ec_query(ec, &value)) + struct acpi_ec_query_handler *handler = cxt; + if (!handler) return; - mutex_lock(&ec->lock); + pr_debug(PREFIX "start query execution\n"); + if (handler->func) + handler->func(handler->data); + else if (handler->handle) + acpi_evaluate_object(handler->handle, NULL, NULL, NULL); + pr_debug(PREFIX "stop query execution\n"); + kfree(handler); +} + +static int acpi_ec_sync_query(struct acpi_ec *ec) +{ + u8 value = 0; + int status; + struct acpi_ec_query_handler *handler, *copy; + if ((status = acpi_ec_query_unlocked(ec, &value))) + return status; list_for_each_entry(handler, &ec->list, node) { if (value == handler->query_bit) { /* have custom handler for this bit */ - memcpy(©, handler, sizeof(copy)); - mutex_unlock(&ec->lock); - if (copy.func) { - copy.func(copy.data); - } else if (copy.handle) { - acpi_evaluate_object(copy.handle, NULL, NULL, NULL); - } - return; + copy = kmalloc(sizeof(*handler), GFP_KERNEL); + if (!copy) + return -ENOMEM; + memcpy(copy, handler, sizeof(*copy)); + pr_debug(PREFIX "push query execution (0x%2x) on queue\n", value); + return acpi_os_execute((copy->func) ? + OSL_NOTIFY_HANDLER : OSL_GPE_HANDLER, + acpi_ec_run, copy); } } + return 0; +} + +static void acpi_ec_gpe_query(void *ec_cxt) +{ + struct acpi_ec *ec = ec_cxt; + if (!ec) + return; + mutex_lock(&ec->lock); + acpi_ec_sync_query(ec); mutex_unlock(&ec->lock); } +static void acpi_ec_gpe_query(void *ec_cxt); + +static int ec_check_sci(struct acpi_ec *ec, u8 state) +{ + if (state & ACPI_EC_FLAG_SCI) { + if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) { + pr_debug(PREFIX "push gpe query to the queue\n"); + return acpi_os_execute(OSL_NOTIFY_HANDLER, + acpi_ec_gpe_query, ec); + } + } + return 0; +} + static u32 acpi_ec_gpe_handler(void *data) { struct acpi_ec *ec = data; - u8 status; pr_debug(PREFIX "~~~> interrupt\n"); - status = acpi_ec_read_status(ec); - advance_transaction(ec, status); - if (ec_transaction_done(ec) && (status & ACPI_EC_FLAG_IBF) == 0) + advance_transaction(ec, acpi_ec_read_status(ec)); + if (ec_transaction_done(ec) && + (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF) == 0) { wake_up(&ec->wait); - ec_check_sci(ec, status); + ec_check_sci(ec, acpi_ec_read_status(ec)); + } return ACPI_INTERRUPT_HANDLED; } diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index d1676b1754d..7c0441f63b3 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -305,6 +305,28 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency; pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency; + /* + * FADT specified C2 latency must be less than or equal to + * 100 microseconds. + */ + if (acpi_gbl_FADT.C2latency > ACPI_PROCESSOR_MAX_C2_LATENCY) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "C2 latency too large [%d]\n", acpi_gbl_FADT.C2latency)); + /* invalidate C2 */ + pr->power.states[ACPI_STATE_C2].address = 0; + } + + /* + * FADT supplied C3 latency must be less than or equal to + * 1000 microseconds. + */ + if (acpi_gbl_FADT.C3latency > ACPI_PROCESSOR_MAX_C3_LATENCY) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "C3 latency too large [%d]\n", acpi_gbl_FADT.C3latency)); + /* invalidate C3 */ + pr->power.states[ACPI_STATE_C3].address = 0; + } + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "lvl2[0x%08x] lvl3[0x%08x]\n", pr->power.states[ACPI_STATE_C2].address, @@ -494,33 +516,6 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr) return status; } -static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx) -{ - - if (!cx->address) - return; - - /* - * C2 latency must be less than or equal to 100 - * microseconds. - */ - else if (cx->latency > ACPI_PROCESSOR_MAX_C2_LATENCY) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "latency too large [%d]\n", cx->latency)); - return; - } - - /* - * Otherwise we've met all of our C2 requirements. - * Normalize the C2 latency to expidite policy - */ - cx->valid = 1; - - cx->latency_ticks = cx->latency; - - return; -} - static void acpi_processor_power_verify_c3(struct acpi_processor *pr, struct acpi_processor_cx *cx) { @@ -532,16 +527,6 @@ static void acpi_processor_power_verify_c3(struct acpi_processor *pr, return; /* - * C3 latency must be less than or equal to 1000 - * microseconds. - */ - else if (cx->latency > ACPI_PROCESSOR_MAX_C3_LATENCY) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "latency too large [%d]\n", cx->latency)); - return; - } - - /* * PIIX4 Erratum #18: We don't support C3 when Type-F (fast) * DMA transfers are used by any ISA device to avoid livelock. * Note that we could disable Type-F DMA (as recommended by @@ -629,7 +614,10 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) break; case ACPI_STATE_C2: - acpi_processor_power_verify_c2(cx); + if (!cx->address) + break; + cx->valid = 1; + cx->latency_ticks = cx->latency; /* Normalize latency */ break; case ACPI_STATE_C3: diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c index d9339806df4..fd09229282e 100644 --- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -242,7 +242,7 @@ static int smbus_alarm(void *context) case ACPI_SBS_CHARGER: case ACPI_SBS_MANAGER: case ACPI_SBS_BATTERY: - acpi_os_execute(OSL_GPE_HANDLER, + acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_smbus_callback, hc); default:; } diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 72e76b4b653..b765790b32b 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -78,6 +78,13 @@ MODULE_LICENSE("GPL"); static int brightness_switch_enabled = 1; module_param(brightness_switch_enabled, bool, 0644); +/* + * By default, we don't allow duplicate ACPI video bus devices + * under the same VGA controller + */ +static int allow_duplicates; +module_param(allow_duplicates, bool, 0644); + static int register_count = 0; static int acpi_video_bus_add(struct acpi_device *device); static int acpi_video_bus_remove(struct acpi_device *device, int type); @@ -2239,11 +2246,47 @@ static int acpi_video_resume(struct acpi_device *device) return AE_OK; } +static acpi_status +acpi_video_bus_match(acpi_handle handle, u32 level, void *context, + void **return_value) +{ + struct acpi_device *device = context; + struct acpi_device *sibling; + int result; + + if (handle == device->handle) + return AE_CTRL_TERMINATE; + + result = acpi_bus_get_device(handle, &sibling); + if (result) + return AE_OK; + + if (!strcmp(acpi_device_name(sibling), ACPI_VIDEO_BUS_NAME)) + return AE_ALREADY_EXISTS; + + return AE_OK; +} + static int acpi_video_bus_add(struct acpi_device *device) { struct acpi_video_bus *video; struct input_dev *input; int error; + acpi_status status; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, + device->parent->handle, 1, + acpi_video_bus_match, NULL, + device, NULL); + if (status == AE_ALREADY_EXISTS) { + printk(KERN_WARNING FW_BUG + "Duplicate ACPI video bus devices for the" + " same VGA controller, please try module " + "parameter \"video.allow_duplicates=1\"" + "if the current driver doesn't work.\n"); + if (!allow_duplicates) + return -ENODEV; + } video = kzalloc(sizeof(struct acpi_video_bus), GFP_KERNEL); if (!video) diff --git a/drivers/base/memory.c b/drivers/base/memory.c index d7d77d4a402..ae6b6c43cff 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -309,17 +309,19 @@ static SYSDEV_ATTR(removable, 0444, show_mem_removable, NULL); * Block size attribute stuff */ static ssize_t -print_block_size(struct class *class, char *buf) +print_block_size(struct sysdev_class *class, + struct sysdev_class_attribute *class_attr, + char *buf) { - return sprintf(buf, "%lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE); + return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE); } -static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL); +static SYSDEV_CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL); static int block_size_init(void) { return sysfs_create_file(&memory_sysdev_class.kset.kobj, - &class_attr_block_size_bytes.attr); + &attr_block_size_bytes.attr); } /* @@ -330,7 +332,9 @@ static int block_size_init(void) */ #ifdef CONFIG_ARCH_MEMORY_PROBE static ssize_t -memory_probe_store(struct class *class, const char *buf, size_t count) +memory_probe_store(struct sysdev_class *class, + struct sysdev_class_attribute *class_attr, + const char *buf, size_t count) { u64 phys_addr; int nid; @@ -346,12 +350,12 @@ memory_probe_store(struct class *class, const char *buf, size_t count) return count; } -static CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store); +static SYSDEV_CLASS_ATTR(probe, S_IWUSR, NULL, memory_probe_store); static int memory_probe_init(void) { return sysfs_create_file(&memory_sysdev_class.kset.kobj, - &class_attr_probe.attr); + &attr_probe.attr); } #else static inline int memory_probe_init(void) @@ -367,7 +371,9 @@ static inline int memory_probe_init(void) /* Soft offline a page */ static ssize_t -store_soft_offline_page(struct class *class, const char *buf, size_t count) +store_soft_offline_page(struct sysdev_class *class, + struct sysdev_class_attribute *class_attr, + const char *buf, size_t count) { int ret; u64 pfn; @@ -384,7 +390,9 @@ store_soft_offline_page(struct class *class, const char *buf, size_t count) /* Forcibly offline a page, including killing processes. */ static ssize_t -store_hard_offline_page(struct class *class, const char *buf, size_t count) +store_hard_offline_page(struct sysdev_class *class, + struct sysdev_class_attribute *class_attr, + const char *buf, size_t count) { int ret; u64 pfn; @@ -397,18 +405,18 @@ store_hard_offline_page(struct class *class, const char *buf, size_t count) return ret ? ret : count; } -static CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page); -static CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page); +static SYSDEV_CLASS_ATTR(soft_offline_page, 0644, NULL, store_soft_offline_page); +static SYSDEV_CLASS_ATTR(hard_offline_page, 0644, NULL, store_hard_offline_page); static __init int memory_fail_init(void) { int err; err = sysfs_create_file(&memory_sysdev_class.kset.kobj, - &class_attr_soft_offline_page.attr); + &attr_soft_offline_page.attr); if (!err) err = sysfs_create_file(&memory_sysdev_class.kset.kobj, - &class_attr_hard_offline_page.attr); + &attr_hard_offline_page.attr); return err; } #else diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 31be3ac2e21..e023682be2c 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -669,7 +669,7 @@ config VIRTIO_CONSOLE config HVCS tristate "IBM Hypervisor Virtual Console Server support" - depends on PPC_PSERIES + depends on PPC_PSERIES && HVC_CONSOLE help Partitionable IBM Power5 ppc64 machines allow hosting of firmware virtual consoles from one Linux partition by diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 5aa7a586a7f..1afb8968a34 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -725,12 +725,11 @@ static struct pci_driver agp_amd64_pci_driver = { int __init agp_amd64_init(void) { int err = 0; - static int done = 0; if (agp_off) return -EINVAL; - if (done++) + if (gart_iommu_aperture) return agp_bridges_found ? 0 : -ENODEV; err = pci_register_driver(&agp_amd64_pci_driver); @@ -771,6 +770,8 @@ int __init agp_amd64_init(void) static void __exit agp_amd64_cleanup(void) { + if (gart_iommu_aperture) + return; if (aperture_resource) release_resource(aperture_resource); pci_unregister_driver(&agp_amd64_pci_driver); diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 30c36ac2cd0..3999a5f25f3 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -2460,10 +2460,14 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev, &bridge->mode); } - if (bridge->driver->mask_memory == intel_i965_mask_memory) + if (bridge->driver->mask_memory == intel_i965_mask_memory) { if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(36))) dev_err(&intel_private.pcidev->dev, "set gfx device dma mask 36bit failed!\n"); + else + pci_set_consistent_dma_mask(intel_private.pcidev, + DMA_BIT_MASK(36)); + } pci_set_drvdata(pdev, bridge); return agp_add_bridge(bridge); diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c index bdaef8e9402..64fe0a793ef 100644 --- a/drivers/char/hw_random/virtio-rng.c +++ b/drivers/char/hw_random/virtio-rng.c @@ -114,7 +114,7 @@ static struct virtio_device_id id_table[] = { { 0 }, }; -static struct virtio_driver virtio_rng = { +static struct virtio_driver virtio_rng_driver = { .driver.name = KBUILD_MODNAME, .driver.owner = THIS_MODULE, .id_table = id_table, @@ -124,12 +124,12 @@ static struct virtio_driver virtio_rng = { static int __init init(void) { - return register_virtio_driver(&virtio_rng); + return register_virtio_driver(&virtio_rng_driver); } static void __exit fini(void) { - unregister_virtio_driver(&virtio_rng); + unregister_virtio_driver(&virtio_rng_driver); } module_init(init); module_exit(fini); diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index c5facd951dd..000dc67b85b 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -197,7 +197,7 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw) edac_printk(KERN_DEBUG, EDAC_MC, "pci-read, sdram scrub control value: %d \n", scrubval); - for (i = 0; ARRAY_SIZE(scrubrates); i++) { + for (i = 0; i < ARRAY_SIZE(scrubrates); i++) { if (scrubrates[i].scrubval == scrubval) { *bw = scrubrates[i].bandwidth; status = 0; diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index 77a9579d716..adc10a2ac5f 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -577,7 +577,13 @@ static void i5000_process_nonfatal_error_info(struct mem_ctl_info *mci, debugf0("\tUncorrected bits= 0x%x\n", ue_errors); branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd); - channel = branch; + + /* + * According with i5000 datasheet, bit 28 has no significance + * for errors M4Err-M12Err and M17Err-M21Err, on FERR_NF_FBD + */ + channel = branch & 2; + bank = NREC_BANK(info->nrecmema); rank = NREC_RANK(info->nrecmema); rdwr = NREC_RDWR(info->nrecmema); diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index bbe47812e4b..e660ac07f3b 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -134,6 +134,10 @@ static int i915_init_phys_hws(struct drm_device *dev) memset(dev_priv->hw_status_page, 0, PAGE_SIZE); + if (IS_I965G(dev)) + dev_priv->dma_status_page |= (dev_priv->dma_status_page >> 28) & + 0xf0; + I915_WRITE(HWS_PGA, dev_priv->dma_status_page); DRM_DEBUG_DRIVER("Enabled hardware status page\n"); return 0; diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index be631cc3e4d..46d88965852 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -45,6 +45,9 @@ module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400); unsigned int i915_powersave = 1; module_param_named(powersave, i915_powersave, int, 0400); +unsigned int i915_lvds_downclock = 0; +module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400); + static struct drm_driver driver; #define INTEL_VGA_DEVICE(id, info) { \ @@ -464,8 +467,11 @@ static struct drm_driver driver = { .lastclose = i915_driver_lastclose, .preclose = i915_driver_preclose, .postclose = i915_driver_postclose, + + /* Used in place of i915_pm_ops for non-DRIVER_MODESET */ .suspend = i915_suspend, .resume = i915_resume, + .device_is_agp = i915_driver_device_is_agp, .enable_vblank = i915_enable_vblank, .disable_vblank = i915_disable_vblank, diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 29dd6762696..2c1669488b5 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -283,6 +283,7 @@ typedef struct drm_i915_private { unsigned int lvds_use_ssc:1; unsigned int edp_support:1; int lvds_ssc_freq; + int edp_bpp; struct notifier_block lid_notifier; @@ -722,6 +723,7 @@ extern struct drm_ioctl_desc i915_ioctls[]; extern int i915_max_ioctl; extern unsigned int i915_fbpercrtc; extern unsigned int i915_powersave; +extern unsigned int i915_lvds_downclock; extern void i915_save_display(struct drm_device *dev); extern void i915_restore_display(struct drm_device *dev); @@ -864,6 +866,7 @@ int i915_do_wait_request(struct drm_device *dev, uint32_t seqno, int interruptib int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf); int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write); +int i915_gem_object_set_to_display_plane(struct drm_gem_object *obj); int i915_gem_attach_phys_object(struct drm_device *dev, struct drm_gem_object *obj, int id); void i915_gem_detach_phys_object(struct drm_device *dev, diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 2748609f05b..0c67924ca80 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2837,6 +2837,57 @@ i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write) return 0; } +/* + * Prepare buffer for display plane. Use uninterruptible for possible flush + * wait, as in modesetting process we're not supposed to be interrupted. + */ +int +i915_gem_object_set_to_display_plane(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + uint32_t old_write_domain, old_read_domains; + int ret; + + /* Not valid to be called on unbound objects. */ + if (obj_priv->gtt_space == NULL) + return -EINVAL; + + i915_gem_object_flush_gpu_write_domain(obj); + + /* Wait on any GPU rendering and flushing to occur. */ + if (obj_priv->active) { +#if WATCH_BUF + DRM_INFO("%s: object %p wait for seqno %08x\n", + __func__, obj, obj_priv->last_rendering_seqno); +#endif + ret = i915_do_wait_request(dev, obj_priv->last_rendering_seqno, 0); + if (ret != 0) + return ret; + } + + old_write_domain = obj->write_domain; + old_read_domains = obj->read_domains; + + obj->read_domains &= I915_GEM_DOMAIN_GTT; + + i915_gem_object_flush_cpu_write_domain(obj); + + /* It should now be out of any other write domains, and we can update + * the domain values for our changes. + */ + BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0); + obj->read_domains |= I915_GEM_DOMAIN_GTT; + obj->write_domain = I915_GEM_DOMAIN_GTT; + obj_priv->dirty = 1; + + trace_i915_gem_object_change_domain(obj, + old_read_domains, + old_write_domain); + + return 0; +} + /** * Moves a single object to the CPU read, and possibly write domain. * @@ -4000,8 +4051,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, "back to user (%d)\n", args->buffer_count, ret); } - } else { - DRM_ERROR("i915_gem_do_execbuffer returns %d\n", ret); } drm_free_large(exec_list); diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 7cd8110051b..89a071a3e6f 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -274,7 +274,6 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev) drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int ret = IRQ_NONE; u32 de_iir, gt_iir, de_ier, pch_iir; - u32 new_de_iir, new_gt_iir, new_pch_iir; struct drm_i915_master_private *master_priv; /* disable master interrupt before clearing iir */ @@ -286,51 +285,42 @@ irqreturn_t ironlake_irq_handler(struct drm_device *dev) gt_iir = I915_READ(GTIIR); pch_iir = I915_READ(SDEIIR); - for (;;) { - if (de_iir == 0 && gt_iir == 0 && pch_iir == 0) - break; - - ret = IRQ_HANDLED; + if (de_iir == 0 && gt_iir == 0 && pch_iir == 0) + goto done; - /* should clear PCH hotplug event before clear CPU irq */ - I915_WRITE(SDEIIR, pch_iir); - new_pch_iir = I915_READ(SDEIIR); + ret = IRQ_HANDLED; - I915_WRITE(DEIIR, de_iir); - new_de_iir = I915_READ(DEIIR); - I915_WRITE(GTIIR, gt_iir); - new_gt_iir = I915_READ(GTIIR); - - if (dev->primary->master) { - master_priv = dev->primary->master->driver_priv; - if (master_priv->sarea_priv) - master_priv->sarea_priv->last_dispatch = - READ_BREADCRUMB(dev_priv); - } - - if (gt_iir & GT_USER_INTERRUPT) { - u32 seqno = i915_get_gem_seqno(dev); - dev_priv->mm.irq_gem_seqno = seqno; - trace_i915_gem_request_complete(dev, seqno); - DRM_WAKEUP(&dev_priv->irq_queue); - dev_priv->hangcheck_count = 0; - mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD); - } + if (dev->primary->master) { + master_priv = dev->primary->master->driver_priv; + if (master_priv->sarea_priv) + master_priv->sarea_priv->last_dispatch = + READ_BREADCRUMB(dev_priv); + } - if (de_iir & DE_GSE) - ironlake_opregion_gse_intr(dev); + if (gt_iir & GT_USER_INTERRUPT) { + u32 seqno = i915_get_gem_seqno(dev); + dev_priv->mm.irq_gem_seqno = seqno; + trace_i915_gem_request_complete(dev, seqno); + DRM_WAKEUP(&dev_priv->irq_queue); + dev_priv->hangcheck_count = 0; + mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD); + } - /* check event from PCH */ - if ((de_iir & DE_PCH_EVENT) && - (pch_iir & SDE_HOTPLUG_MASK)) { - queue_work(dev_priv->wq, &dev_priv->hotplug_work); - } + if (de_iir & DE_GSE) + ironlake_opregion_gse_intr(dev); - de_iir = new_de_iir; - gt_iir = new_gt_iir; - pch_iir = new_pch_iir; + /* check event from PCH */ + if ((de_iir & DE_PCH_EVENT) && + (pch_iir & SDE_HOTPLUG_MASK)) { + queue_work(dev_priv->wq, &dev_priv->hotplug_work); } + /* should clear PCH hotplug event before clear CPU irq */ + I915_WRITE(SDEIIR, pch_iir); + I915_WRITE(GTIIR, gt_iir); + I915_WRITE(DEIIR, de_iir); + +done: I915_WRITE(DEIER, de_ier); (void)I915_READ(DEIER); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 149d360d64a..847006c5218 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1815,7 +1815,7 @@ #define DSPFW_PLANEB_SHIFT 8 #define DSPFW2 0x70038 #define DSPFW_CURSORA_MASK 0x00003f00 -#define DSPFW_CURSORA_SHIFT 16 +#define DSPFW_CURSORA_SHIFT 8 #define DSPFW3 0x7003c #define DSPFW_HPLL_SR_EN (1<<31) #define DSPFW_CURSOR_SR_SHIFT 24 diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index f2756774758..15fbc1b5a83 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -33,6 +33,8 @@ #define SLAVE_ADDR1 0x70 #define SLAVE_ADDR2 0x72 +static int panel_type; + static void * find_section(struct bdb_header *bdb, int section_id) { @@ -128,6 +130,7 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, dev_priv->lvds_dither = lvds_options->pixel_dither; if (lvds_options->panel_type == 0xff) return; + panel_type = lvds_options->panel_type; lvds_lfp_data = find_section(bdb, BDB_LVDS_LFP_DATA); if (!lvds_lfp_data) @@ -197,7 +200,8 @@ parse_lfp_panel_data(struct drm_i915_private *dev_priv, memset(temp_mode, 0, sizeof(*temp_mode)); } kfree(temp_mode); - if (temp_downclock < panel_fixed_mode->clock) { + if (temp_downclock < panel_fixed_mode->clock && + i915_lvds_downclock) { dev_priv->lvds_downclock_avail = 1; dev_priv->lvds_downclock = temp_downclock; DRM_DEBUG_KMS("LVDS downclock is found in VBT. ", @@ -405,6 +409,34 @@ parse_driver_features(struct drm_i915_private *dev_priv, } static void +parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb) +{ + struct bdb_edp *edp; + + edp = find_section(bdb, BDB_EDP); + if (!edp) { + if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp_support) { + DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported,\ + assume 18bpp panel color depth.\n"); + dev_priv->edp_bpp = 18; + } + return; + } + + switch ((edp->color_depth >> (panel_type * 2)) & 3) { + case EDP_18BPP: + dev_priv->edp_bpp = 18; + break; + case EDP_24BPP: + dev_priv->edp_bpp = 24; + break; + case EDP_30BPP: + dev_priv->edp_bpp = 30; + break; + } +} + +static void parse_device_mapping(struct drm_i915_private *dev_priv, struct bdb_header *bdb) { @@ -521,6 +553,7 @@ intel_init_bios(struct drm_device *dev) parse_sdvo_device_mapping(dev_priv, bdb); parse_device_mapping(dev_priv, bdb); parse_driver_features(dev_priv, bdb); + parse_edp(dev_priv, bdb); pci_unmap_rom(pdev, bios); diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h index 425ac9d7f72..4c18514f6f8 100644 --- a/drivers/gpu/drm/i915/intel_bios.h +++ b/drivers/gpu/drm/i915/intel_bios.h @@ -98,6 +98,7 @@ struct vbios_data { #define BDB_SDVO_LVDS_PNP_IDS 24 #define BDB_SDVO_LVDS_POWER_SEQ 25 #define BDB_TV_OPTIONS 26 +#define BDB_EDP 27 #define BDB_LVDS_OPTIONS 40 #define BDB_LVDS_LFP_DATA_PTRS 41 #define BDB_LVDS_LFP_DATA 42 @@ -426,6 +427,45 @@ struct bdb_driver_features { u8 custom_vbt_version; } __attribute__((packed)); +#define EDP_18BPP 0 +#define EDP_24BPP 1 +#define EDP_30BPP 2 +#define EDP_RATE_1_62 0 +#define EDP_RATE_2_7 1 +#define EDP_LANE_1 0 +#define EDP_LANE_2 1 +#define EDP_LANE_4 3 +#define EDP_PREEMPHASIS_NONE 0 +#define EDP_PREEMPHASIS_3_5dB 1 +#define EDP_PREEMPHASIS_6dB 2 +#define EDP_PREEMPHASIS_9_5dB 3 +#define EDP_VSWING_0_4V 0 +#define EDP_VSWING_0_6V 1 +#define EDP_VSWING_0_8V 2 +#define EDP_VSWING_1_2V 3 + +struct edp_power_seq { + u16 t3; + u16 t7; + u16 t9; + u16 t10; + u16 t12; +} __attribute__ ((packed)); + +struct edp_link_params { + u8 rate:4; + u8 lanes:4; + u8 preemphasis:4; + u8 vswing:4; +} __attribute__ ((packed)); + +struct bdb_edp { + struct edp_power_seq power_seqs[16]; + u32 color_depth; + u32 sdrrs_msa_timing_delay; + struct edp_link_params link_params[16]; +} __attribute__ ((packed)); + bool intel_init_bios(struct drm_device *dev); /* diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 002612fae71..45da78ef4a9 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -70,8 +70,6 @@ struct intel_limit { intel_p2_t p2; bool (* find_pll)(const intel_limit_t *, struct drm_crtc *, int, int, intel_clock_t *); - bool (* find_reduced_pll)(const intel_limit_t *, struct drm_crtc *, - int, int, intel_clock_t *); }; #define I8XX_DOT_MIN 25000 @@ -243,11 +241,11 @@ struct intel_limit { #define IRONLAKE_VCO_MIN 1760000 #define IRONLAKE_VCO_MAX 3510000 #define IRONLAKE_N_MIN 1 -#define IRONLAKE_N_MAX 5 +#define IRONLAKE_N_MAX 6 #define IRONLAKE_M_MIN 79 -#define IRONLAKE_M_MAX 118 +#define IRONLAKE_M_MAX 127 #define IRONLAKE_M1_MIN 12 -#define IRONLAKE_M1_MAX 23 +#define IRONLAKE_M1_MAX 22 #define IRONLAKE_M2_MIN 5 #define IRONLAKE_M2_MAX 9 #define IRONLAKE_P_SDVO_DAC_MIN 5 @@ -274,9 +272,6 @@ static bool intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); static bool -intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *best_clock); -static bool intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); @@ -299,7 +294,6 @@ static const intel_limit_t intel_limits_i8xx_dvo = { .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, .p2_slow = I8XX_P2_SLOW, .p2_fast = I8XX_P2_FAST }, .find_pll = intel_find_best_PLL, - .find_reduced_pll = intel_find_best_reduced_PLL, }; static const intel_limit_t intel_limits_i8xx_lvds = { @@ -314,7 +308,6 @@ static const intel_limit_t intel_limits_i8xx_lvds = { .p2 = { .dot_limit = I8XX_P2_SLOW_LIMIT, .p2_slow = I8XX_P2_LVDS_SLOW, .p2_fast = I8XX_P2_LVDS_FAST }, .find_pll = intel_find_best_PLL, - .find_reduced_pll = intel_find_best_reduced_PLL, }; static const intel_limit_t intel_limits_i9xx_sdvo = { @@ -329,7 +322,6 @@ static const intel_limit_t intel_limits_i9xx_sdvo = { .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, .find_pll = intel_find_best_PLL, - .find_reduced_pll = intel_find_best_reduced_PLL, }; static const intel_limit_t intel_limits_i9xx_lvds = { @@ -347,7 +339,6 @@ static const intel_limit_t intel_limits_i9xx_lvds = { .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_FAST }, .find_pll = intel_find_best_PLL, - .find_reduced_pll = intel_find_best_reduced_PLL, }; /* below parameter and function is for G4X Chipset Family*/ @@ -365,7 +356,6 @@ static const intel_limit_t intel_limits_g4x_sdvo = { .p2_fast = G4X_P2_SDVO_FAST }, .find_pll = intel_g4x_find_best_PLL, - .find_reduced_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_hdmi = { @@ -382,7 +372,6 @@ static const intel_limit_t intel_limits_g4x_hdmi = { .p2_fast = G4X_P2_HDMI_DAC_FAST }, .find_pll = intel_g4x_find_best_PLL, - .find_reduced_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_single_channel_lvds = { @@ -407,7 +396,6 @@ static const intel_limit_t intel_limits_g4x_single_channel_lvds = { .p2_fast = G4X_P2_SINGLE_CHANNEL_LVDS_FAST }, .find_pll = intel_g4x_find_best_PLL, - .find_reduced_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { @@ -432,7 +420,6 @@ static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { .p2_fast = G4X_P2_DUAL_CHANNEL_LVDS_FAST }, .find_pll = intel_g4x_find_best_PLL, - .find_reduced_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_display_port = { @@ -470,7 +457,6 @@ static const intel_limit_t intel_limits_pineview_sdvo = { .p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT, .p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST }, .find_pll = intel_find_best_PLL, - .find_reduced_pll = intel_find_best_reduced_PLL, }; static const intel_limit_t intel_limits_pineview_lvds = { @@ -486,7 +472,6 @@ static const intel_limit_t intel_limits_pineview_lvds = { .p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT, .p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW }, .find_pll = intel_find_best_PLL, - .find_reduced_pll = intel_find_best_reduced_PLL, }; static const intel_limit_t intel_limits_ironlake_sdvo = { @@ -768,46 +753,6 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, return (err != target); } - -static bool -intel_find_best_reduced_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *best_clock) - -{ - struct drm_device *dev = crtc->dev; - intel_clock_t clock; - int err = target; - bool found = false; - - memcpy(&clock, best_clock, sizeof(intel_clock_t)); - - for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { - for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; clock.m2++) { - /* m1 is always 0 in Pineview */ - if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev)) - break; - for (clock.n = limit->n.min; clock.n <= limit->n.max; - clock.n++) { - int this_err; - - intel_clock(dev, refclk, &clock); - - if (!intel_PLL_is_valid(crtc, &clock)) - continue; - - this_err = abs(clock.dot - target); - if (this_err < err) { - *best_clock = clock; - err = this_err; - found = true; - } - } - } - } - - return found; -} - static bool intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock) @@ -1262,7 +1207,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return ret; } - ret = i915_gem_object_set_to_gtt_domain(obj, 1); + ret = i915_gem_object_set_to_display_plane(obj); if (ret != 0) { i915_gem_object_unpin(obj); mutex_unlock(&dev->struct_mutex); @@ -2910,10 +2855,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, return -EINVAL; } - if (is_lvds && limit->find_reduced_pll && - dev_priv->lvds_downclock_avail) { - memcpy(&reduced_clock, &clock, sizeof(intel_clock_t)); - has_reduced_clock = limit->find_reduced_pll(limit, crtc, + if (is_lvds && dev_priv->lvds_downclock_avail) { + has_reduced_clock = limit->find_pll(limit, crtc, dev_priv->lvds_downclock, refclk, &reduced_clock); @@ -2981,6 +2924,21 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, temp |= PIPE_8BPC; else temp |= PIPE_6BPC; + } else if (is_edp) { + switch (dev_priv->edp_bpp/3) { + case 8: + temp |= PIPE_8BPC; + break; + case 10: + temp |= PIPE_10BPC; + break; + case 6: + temp |= PIPE_6BPC; + break; + case 12: + temp |= PIPE_12BPC; + break; + } } else temp |= PIPE_8BPC; I915_WRITE(pipeconf_reg, temp); diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 1349d9fd01c..439506cefc1 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -125,9 +125,15 @@ intel_dp_link_clock(uint8_t link_bw) /* I think this is a fiction */ static int -intel_dp_link_required(int pixel_clock) +intel_dp_link_required(struct drm_device *dev, + struct intel_output *intel_output, int pixel_clock) { - return pixel_clock * 3; + struct drm_i915_private *dev_priv = dev->dev_private; + + if (IS_eDP(intel_output)) + return (pixel_clock * dev_priv->edp_bpp) / 8; + else + return pixel_clock * 3; } static int @@ -138,7 +144,8 @@ intel_dp_mode_valid(struct drm_connector *connector, int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output)); int max_lanes = intel_dp_max_lane_count(intel_output); - if (intel_dp_link_required(mode->clock) > max_link_clock * max_lanes) + if (intel_dp_link_required(connector->dev, intel_output, mode->clock) + > max_link_clock * max_lanes) return MODE_CLOCK_HIGH; if (mode->clock < 10000) @@ -492,7 +499,8 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, for (clock = 0; clock <= max_clock; clock++) { int link_avail = intel_dp_link_clock(bws[clock]) * lane_count; - if (intel_dp_link_required(mode->clock) <= link_avail) { + if (intel_dp_link_required(encoder->dev, intel_output, mode->clock) + <= link_avail) { dp_priv->link_bw = bws[clock]; dp_priv->lane_count = lane_count; adjusted_mode->clock = intel_dp_link_clock(dp_priv->link_bw); @@ -1289,53 +1297,7 @@ intel_dp_hot_plug(struct intel_output *intel_output) if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON) intel_dp_check_link_status(intel_output); } -/* - * Enumerate the child dev array parsed from VBT to check whether - * the given DP is present. - * If it is present, return 1. - * If it is not present, return false. - * If no child dev is parsed from VBT, it is assumed that the given - * DP is present. - */ -static int dp_is_present_in_vbt(struct drm_device *dev, int dp_reg) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - struct child_device_config *p_child; - int i, dp_port, ret; - - if (!dev_priv->child_dev_num) - return 1; - - dp_port = 0; - if (dp_reg == DP_B || dp_reg == PCH_DP_B) - dp_port = PORT_IDPB; - else if (dp_reg == DP_C || dp_reg == PCH_DP_C) - dp_port = PORT_IDPC; - else if (dp_reg == DP_D || dp_reg == PCH_DP_D) - dp_port = PORT_IDPD; - - ret = 0; - for (i = 0; i < dev_priv->child_dev_num; i++) { - p_child = dev_priv->child_dev + i; - /* - * If the device type is not DP, continue. - */ - if (p_child->device_type != DEVICE_TYPE_DP && - p_child->device_type != DEVICE_TYPE_eDP) - continue; - /* Find the eDP port */ - if (dp_reg == DP_A && p_child->device_type == DEVICE_TYPE_eDP) { - ret = 1; - break; - } - /* Find the DP port */ - if (p_child->dvo_port == dp_port) { - ret = 1; - break; - } - } - return ret; -} + void intel_dp_init(struct drm_device *dev, int output_reg) { @@ -1345,10 +1307,6 @@ intel_dp_init(struct drm_device *dev, int output_reg) struct intel_dp_priv *dp_priv; const char *name = NULL; - if (!dp_is_present_in_vbt(dev, output_reg)) { - DRM_DEBUG_KMS("DP is not present. Ignore it\n"); - return; - } intel_output = kcalloc(sizeof(struct intel_output) + sizeof(struct intel_dp_priv), 1, GFP_KERNEL); if (!intel_output) @@ -1373,11 +1331,10 @@ intel_dp_init(struct drm_device *dev, int output_reg) else if (output_reg == DP_D || output_reg == PCH_DP_D) intel_output->clone_mask = (1 << INTEL_DP_D_CLONE_BIT); - if (IS_eDP(intel_output)) { - intel_output->crtc_mask = (1 << 1); + if (IS_eDP(intel_output)) intel_output->clone_mask = (1 << INTEL_EDP_CLONE_BIT); - } else - intel_output->crtc_mask = (1 << 0) | (1 << 1); + + intel_output->crtc_mask = (1 << 0) | (1 << 1); connector->interlace_allowed = true; connector->doublescan_allowed = 0; diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 06431941b23..0e268deed76 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -225,52 +225,6 @@ static const struct drm_encoder_funcs intel_hdmi_enc_funcs = { .destroy = intel_hdmi_enc_destroy, }; -/* - * Enumerate the child dev array parsed from VBT to check whether - * the given HDMI is present. - * If it is present, return 1. - * If it is not present, return false. - * If no child dev is parsed from VBT, it assumes that the given - * HDMI is present. - */ -static int hdmi_is_present_in_vbt(struct drm_device *dev, int hdmi_reg) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - struct child_device_config *p_child; - int i, hdmi_port, ret; - - if (!dev_priv->child_dev_num) - return 1; - - if (hdmi_reg == SDVOB) - hdmi_port = DVO_B; - else if (hdmi_reg == SDVOC) - hdmi_port = DVO_C; - else if (hdmi_reg == HDMIB) - hdmi_port = DVO_B; - else if (hdmi_reg == HDMIC) - hdmi_port = DVO_C; - else if (hdmi_reg == HDMID) - hdmi_port = DVO_D; - else - return 0; - - ret = 0; - for (i = 0; i < dev_priv->child_dev_num; i++) { - p_child = dev_priv->child_dev + i; - /* - * If the device type is not HDMI, continue. - */ - if (p_child->device_type != DEVICE_TYPE_HDMI) - continue; - /* Find the HDMI port */ - if (p_child->dvo_port == hdmi_port) { - ret = 1; - break; - } - } - return ret; -} void intel_hdmi_init(struct drm_device *dev, int sdvox_reg) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -278,10 +232,6 @@ void intel_hdmi_init(struct drm_device *dev, int sdvox_reg) struct intel_output *intel_output; struct intel_hdmi_priv *hdmi_priv; - if (!hdmi_is_present_in_vbt(dev, sdvox_reg)) { - DRM_DEBUG_KMS("HDMI is not present. Ignored it \n"); - return; - } intel_output = kcalloc(sizeof(struct intel_output) + sizeof(struct intel_hdmi_priv), 1, GFP_KERNEL); if (!intel_output) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index f4b4aa242df..aa74e59bec6 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -602,6 +602,20 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder, /* Some lid devices report incorrect lid status, assume they're connected */ static const struct dmi_system_id bad_lid_status[] = { { + .ident = "Compaq nx9020", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_BOARD_NAME, "3084"), + }, + }, + { + .ident = "Samsung SX20S", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Phoenix Technologies LTD"), + DMI_MATCH(DMI_BOARD_NAME, "SX20S"), + }, + }, + { .ident = "Aspire One", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), @@ -912,7 +926,8 @@ static void intel_find_lvds_downclock(struct drm_device *dev, } } mutex_unlock(&dev->mode_config.mutex); - if (temp_downclock < panel_fixed_mode->clock) { + if (temp_downclock < panel_fixed_mode->clock && + i915_lvds_downclock) { /* We found the downclock for LVDS. */ dev_priv->lvds_downclock_avail = 1; dev_priv->lvds_downclock = temp_downclock; diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index de5144c8c15..eaacfd0920d 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -462,14 +462,63 @@ static int intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode) } /** - * Don't check status code from this as it switches the bus back to the - * SDVO chips which defeats the purpose of doing a bus switch in the first - * place. + * Try to read the response after issuie the DDC switch command. But it + * is noted that we must do the action of reading response and issuing DDC + * switch command in one I2C transaction. Otherwise when we try to start + * another I2C transaction after issuing the DDC bus switch, it will be + * switched to the internal SDVO register. */ static void intel_sdvo_set_control_bus_switch(struct intel_output *intel_output, u8 target) { - intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, &target, 1); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u8 out_buf[2], cmd_buf[2], ret_value[2], ret; + struct i2c_msg msgs[] = { + { + .addr = sdvo_priv->slave_addr >> 1, + .flags = 0, + .len = 2, + .buf = out_buf, + }, + /* the following two are to read the response */ + { + .addr = sdvo_priv->slave_addr >> 1, + .flags = 0, + .len = 1, + .buf = cmd_buf, + }, + { + .addr = sdvo_priv->slave_addr >> 1, + .flags = I2C_M_RD, + .len = 1, + .buf = ret_value, + }, + }; + + intel_sdvo_debug_write(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, + &target, 1); + /* write the DDC switch command argument */ + intel_sdvo_write_byte(intel_output, SDVO_I2C_ARG_0, target); + + out_buf[0] = SDVO_I2C_OPCODE; + out_buf[1] = SDVO_CMD_SET_CONTROL_BUS_SWITCH; + cmd_buf[0] = SDVO_I2C_CMD_STATUS; + cmd_buf[1] = 0; + ret_value[0] = 0; + ret_value[1] = 0; + + ret = i2c_transfer(intel_output->i2c_bus, msgs, 3); + if (ret != 3) { + /* failure in I2C transfer */ + DRM_DEBUG_KMS("I2c transfer returned %d\n", ret); + return; + } + if (ret_value[0] != SDVO_CMD_STATUS_SUCCESS) { + DRM_DEBUG_KMS("DDC switch command returns response %d\n", + ret_value[0]); + return; + } + return; } static bool intel_sdvo_set_target_input(struct intel_output *intel_output, bool target_0, bool target_1) @@ -1579,6 +1628,32 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response) edid = drm_get_edid(&intel_output->base, intel_output->ddc_bus); + /* This is only applied to SDVO cards with multiple outputs */ + if (edid == NULL && intel_sdvo_multifunc_encoder(intel_output)) { + uint8_t saved_ddc, temp_ddc; + saved_ddc = sdvo_priv->ddc_bus; + temp_ddc = sdvo_priv->ddc_bus >> 1; + /* + * Don't use the 1 as the argument of DDC bus switch to get + * the EDID. It is used for SDVO SPD ROM. + */ + while(temp_ddc > 1) { + sdvo_priv->ddc_bus = temp_ddc; + edid = drm_get_edid(&intel_output->base, + intel_output->ddc_bus); + if (edid) { + /* + * When we can get the EDID, maybe it is the + * correct DDC bus. Update it. + */ + sdvo_priv->ddc_bus = temp_ddc; + break; + } + temp_ddc >>= 1; + } + if (edid == NULL) + sdvo_priv->ddc_bus = saved_ddc; + } /* when there is no edid and no monitor is connected with VGA * port, try to use the CRT ddc to read the EDID for DVI-connector */ diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 1d5b9b7b033..552ec110b74 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -1840,8 +1840,6 @@ intel_tv_init(struct drm_device *dev) drm_connector_attach_property(connector, dev->mode_config.tv_bottom_margin_property, tv_priv->margin[TV_MARGIN_BOTTOM]); - - dev_priv->hotplug_supported_mask |= TV_HOTPLUG_INT_STATUS; out: drm_sysfs_connector_add(connector); } diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index f70f46582c6..4687af40dd5 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -87,9 +87,9 @@ static int ali1563_transaction(struct i2c_adapter * a, int size) outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2); timeout = ALI1563_MAX_TIMEOUT; - do + do { msleep(1); - while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout); + } while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout); dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, " "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", @@ -157,9 +157,9 @@ static int ali1563_block_start(struct i2c_adapter * a) outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2); timeout = ALI1563_MAX_TIMEOUT; - do + do { msleep(1); - while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout); + } while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout); dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, " "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index 0ed68e2ccd2..f7346a9bd95 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -75,7 +75,7 @@ static int pca_isa_waitforcompletion(void *pd) unsigned long timeout; if (irq > -1) { - ret = wait_event_interruptible_timeout(pca_wait, + ret = wait_event_timeout(pca_wait, pca_isa_readbyte(pd, I2C_PCA_CON) & I2C_PCA_CON_SI, pca_isa_ops.timeout); } else { @@ -96,7 +96,7 @@ static void pca_isa_resetchip(void *pd) } static irqreturn_t pca_handler(int this_irq, void *dev_id) { - wake_up_interruptible(&pca_wait); + wake_up(&pca_wait); return IRQ_HANDLED; } diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c index c4df9d411cd..5b2213df5ed 100644 --- a/drivers/i2c/busses/i2c-pca-platform.c +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -84,7 +84,7 @@ static int i2c_pca_pf_waitforcompletion(void *pd) unsigned long timeout; if (i2c->irq) { - ret = wait_event_interruptible_timeout(i2c->wait, + ret = wait_event_timeout(i2c->wait, i2c->algo_data.read_byte(i2c, I2C_PCA_CON) & I2C_PCA_CON_SI, i2c->adap.timeout); } else { @@ -122,7 +122,7 @@ static irqreturn_t i2c_pca_pf_handler(int this_irq, void *dev_id) if ((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0) return IRQ_NONE; - wake_up_interruptible(&i2c->wait); + wake_up(&i2c->wait); return IRQ_HANDLED; } diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 1e245e9cad3..e56e4b6823c 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -324,12 +324,12 @@ static int piix4_transaction(void) else msleep(1); - while ((timeout++ < MAX_TIMEOUT) && + while ((++timeout < MAX_TIMEOUT) && ((temp = inb_p(SMBHSTSTS)) & 0x01)) msleep(1); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout == MAX_TIMEOUT) { dev_err(&piix4_adapter.dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index e4b1543015a..a84a909e123 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -165,10 +165,10 @@ static int vt596_transaction(u8 size) do { msleep(1); temp = inb_p(SMBHSTSTS); - } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT)); + } while ((temp & 0x01) && (++timeout < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout == MAX_TIMEOUT) { result = -ETIMEDOUT; dev_err(&vt596_adapter.dev, "SMBus timeout!\n"); } diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 0ac2f90ab84..10be7b5fbe9 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -248,7 +248,7 @@ static const struct attribute_group *i2c_dev_attr_groups[] = { NULL }; -const static struct dev_pm_ops i2c_device_pm_ops = { +static const struct dev_pm_ops i2c_device_pm_ops = { .suspend = i2c_device_pm_suspend, .resume = i2c_device_pm_resume, }; @@ -843,6 +843,9 @@ int i2c_del_adapter(struct i2c_adapter *adap) adap->dev.parent); #endif + /* device name is gone after device_unregister */ + dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name); + /* clean up the sysfs representation */ init_completion(&adap->dev_released); device_unregister(&adap->dev); @@ -855,8 +858,6 @@ int i2c_del_adapter(struct i2c_adapter *adap) idr_remove(&i2c_adapter_idr, adap->nr); mutex_unlock(&core_lock); - dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name); - /* Clear the device structure in case this adapter is ever going to be added again */ memset(&adap->dev, 0, sizeof(adap->dev)); diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index dee6706038a..258c639571b 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -59,7 +59,8 @@ static void evdev_pass_event(struct evdev_client *client, client->head &= EVDEV_BUFFER_SIZE - 1; spin_unlock(&client->buffer_lock); - kill_fasync(&client->fasync, SIGIO, POLL_IN); + if (event->type == EV_SYN) + kill_fasync(&client->fasync, SIGIO, POLL_IN); } /* diff --git a/drivers/input/input.c b/drivers/input/input.c index ab060710688..30b503b8d67 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -24,6 +24,7 @@ #include <linux/mutex.h> #include <linux/rcupdate.h> #include <linux/smp_lock.h> +#include "input-compat.h" MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>"); MODULE_DESCRIPTION("Input core"); @@ -764,6 +765,40 @@ static int input_attach_handler(struct input_dev *dev, struct input_handler *han return error; } +#ifdef CONFIG_COMPAT + +static int input_bits_to_string(char *buf, int buf_size, + unsigned long bits, bool skip_empty) +{ + int len = 0; + + if (INPUT_COMPAT_TEST) { + u32 dword = bits >> 32; + if (dword || !skip_empty) + len += snprintf(buf, buf_size, "%x ", dword); + + dword = bits & 0xffffffffUL; + if (dword || !skip_empty || len) + len += snprintf(buf + len, max(buf_size - len, 0), + "%x", dword); + } else { + if (bits || !skip_empty) + len += snprintf(buf, buf_size, "%lx", bits); + } + + return len; +} + +#else /* !CONFIG_COMPAT */ + +static int input_bits_to_string(char *buf, int buf_size, + unsigned long bits, bool skip_empty) +{ + return bits || !skip_empty ? + snprintf(buf, buf_size, "%lx", bits) : 0; +} + +#endif #ifdef CONFIG_PROC_FS @@ -832,14 +867,25 @@ static void input_seq_print_bitmap(struct seq_file *seq, const char *name, unsigned long *bitmap, int max) { int i; - - for (i = BITS_TO_LONGS(max) - 1; i > 0; i--) - if (bitmap[i]) - break; + bool skip_empty = true; + char buf[18]; seq_printf(seq, "B: %s=", name); - for (; i >= 0; i--) - seq_printf(seq, "%lx%s", bitmap[i], i > 0 ? " " : ""); + + for (i = BITS_TO_LONGS(max) - 1; i >= 0; i--) { + if (input_bits_to_string(buf, sizeof(buf), + bitmap[i], skip_empty)) { + skip_empty = false; + seq_printf(seq, "%s%s", buf, i > 0 ? " " : ""); + } + } + + /* + * If no output was produced print a single 0. + */ + if (skip_empty) + seq_puts(seq, "0"); + seq_putc(seq, '\n'); } @@ -1128,14 +1174,23 @@ static int input_print_bitmap(char *buf, int buf_size, unsigned long *bitmap, { int i; int len = 0; + bool skip_empty = true; + + for (i = BITS_TO_LONGS(max) - 1; i >= 0; i--) { + len += input_bits_to_string(buf + len, max(buf_size - len, 0), + bitmap[i], skip_empty); + if (len) { + skip_empty = false; + if (i > 0) + len += snprintf(buf + len, max(buf_size - len, 0), " "); + } + } - for (i = BITS_TO_LONGS(max) - 1; i > 0; i--) - if (bitmap[i]) - break; - - for (; i >= 0; i--) - len += snprintf(buf + len, max(buf_size - len, 0), - "%lx%s", bitmap[i], i > 0 ? " " : ""); + /* + * If no output was produced print a single 0. + */ + if (len == 0) + len = snprintf(buf, buf_size, "%d", 0); if (add_cr) len += snprintf(buf + len, max(buf_size - len, 0), "\n"); @@ -1150,7 +1205,8 @@ static ssize_t input_dev_show_cap_##bm(struct device *dev, \ { \ struct input_dev *input_dev = to_input_dev(dev); \ int len = input_print_bitmap(buf, PAGE_SIZE, \ - input_dev->bm##bit, ev##_MAX, 1); \ + input_dev->bm##bit, ev##_MAX, \ + true); \ return min_t(int, len, PAGE_SIZE); \ } \ static DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL) @@ -1214,7 +1270,7 @@ static int input_add_uevent_bm_var(struct kobj_uevent_env *env, len = input_print_bitmap(&env->buf[env->buflen - 1], sizeof(env->buf) - env->buflen, - bitmap, max, 0); + bitmap, max, false); if (len >= (sizeof(env->buf) - env->buflen)) return -ENOMEM; diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c index 67c207f5b1a..45ac70eae0a 100644 --- a/drivers/input/joystick/gf2k.c +++ b/drivers/input/joystick/gf2k.c @@ -277,7 +277,7 @@ static int gf2k_connect(struct gameport *gameport, struct gameport_driver *drv) } #ifdef RESET_WORKS - if ((gf2k->id != (GB(19,2,0) | GB(15,3,2) | GB(12,3,5))) || + if ((gf2k->id != (GB(19,2,0) | GB(15,3,2) | GB(12,3,5))) && (gf2k->id != (GB(31,2,0) | GB(27,3,2) | GB(24,3,5)))) { err = -ENODEV; goto fail2; diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 482cb1204e4..8a28fb7846d 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -446,7 +446,7 @@ static void xpad_irq_in(struct urb *urb) } exit: - retval = usb_submit_urb (urb, GFP_ATOMIC); + retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) err ("%s - usb_submit_urb failed with result %d", __func__, retval); @@ -571,7 +571,7 @@ static int xpad_play_effect(struct input_dev *dev, void *data, xpad->odata[6] = 0x00; xpad->odata[7] = 0x00; xpad->irq_out->transfer_buffer_length = 8; - usb_submit_urb(xpad->irq_out, GFP_KERNEL); + usb_submit_urb(xpad->irq_out, GFP_ATOMIC); } return 0; diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 1f5e2ce327d..7b4056292ea 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -225,8 +225,10 @@ struct atkbd { struct delayed_work event_work; unsigned long event_jiffies; - struct mutex event_mutex; unsigned long event_mask; + + /* Serializes reconnect(), attr->set() and event work */ + struct mutex mutex; }; /* @@ -577,7 +579,7 @@ static void atkbd_event_work(struct work_struct *work) { struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work); - mutex_lock(&atkbd->event_mutex); + mutex_lock(&atkbd->mutex); if (!atkbd->enabled) { /* @@ -596,7 +598,7 @@ static void atkbd_event_work(struct work_struct *work) atkbd_set_repeat_rate(atkbd); } - mutex_unlock(&atkbd->event_mutex); + mutex_unlock(&atkbd->mutex); } /* @@ -612,7 +614,7 @@ static void atkbd_schedule_event_work(struct atkbd *atkbd, int event_bit) atkbd->event_jiffies = jiffies; set_bit(event_bit, &atkbd->event_mask); - wmb(); + mb(); schedule_delayed_work(&atkbd->event_work, delay); } @@ -849,13 +851,20 @@ static void atkbd_disconnect(struct serio *serio) { struct atkbd *atkbd = serio_get_drvdata(serio); + sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group); + atkbd_disable(atkbd); - /* make sure we don't have a command in flight */ + input_unregister_device(atkbd->dev); + + /* + * Make sure we don't have a command in flight. + * Note that since atkbd->enabled is false event work will keep + * rescheduling itself until it gets canceled and will not try + * accessing freed input device or serio port. + */ cancel_delayed_work_sync(&atkbd->event_work); - sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group); - input_unregister_device(atkbd->dev); serio_close(serio); serio_set_drvdata(serio, NULL); kfree(atkbd); @@ -1087,7 +1096,7 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv) atkbd->dev = dev; ps2_init(&atkbd->ps2dev, serio); INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work); - mutex_init(&atkbd->event_mutex); + mutex_init(&atkbd->mutex); switch (serio->id.type) { @@ -1160,19 +1169,23 @@ static int atkbd_reconnect(struct serio *serio) { struct atkbd *atkbd = serio_get_drvdata(serio); struct serio_driver *drv = serio->drv; + int retval = -1; if (!atkbd || !drv) { printk(KERN_DEBUG "atkbd: reconnect request, but serio is disconnected, ignoring...\n"); return -1; } + mutex_lock(&atkbd->mutex); + atkbd_disable(atkbd); if (atkbd->write) { if (atkbd_probe(atkbd)) - return -1; + goto out; + if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra)) - return -1; + goto out; atkbd_activate(atkbd); @@ -1190,8 +1203,11 @@ static int atkbd_reconnect(struct serio *serio) } atkbd_enable(atkbd); + retval = 0; - return 0; + out: + mutex_unlock(&atkbd->mutex); + return retval; } static struct serio_device_id atkbd_serio_ids[] = { @@ -1235,47 +1251,28 @@ static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, ssize_t (*handler)(struct atkbd *, char *)) { struct serio *serio = to_serio_port(dev); - int retval; - - retval = serio_pin_driver(serio); - if (retval) - return retval; - - if (serio->drv != &atkbd_drv) { - retval = -ENODEV; - goto out; - } - - retval = handler((struct atkbd *)serio_get_drvdata(serio), buf); + struct atkbd *atkbd = serio_get_drvdata(serio); -out: - serio_unpin_driver(serio); - return retval; + return handler(atkbd, buf); } static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count, ssize_t (*handler)(struct atkbd *, const char *, size_t)) { struct serio *serio = to_serio_port(dev); - struct atkbd *atkbd; + struct atkbd *atkbd = serio_get_drvdata(serio); int retval; - retval = serio_pin_driver(serio); + retval = mutex_lock_interruptible(&atkbd->mutex); if (retval) return retval; - if (serio->drv != &atkbd_drv) { - retval = -ENODEV; - goto out; - } - - atkbd = serio_get_drvdata(serio); atkbd_disable(atkbd); retval = handler(atkbd, buf, count); atkbd_enable(atkbd); -out: - serio_unpin_driver(serio); + mutex_unlock(&atkbd->mutex); + return retval; } diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c index 6e52d855f63..d410d7a52f1 100644 --- a/drivers/input/keyboard/davinci_keyscan.c +++ b/drivers/input/keyboard/davinci_keyscan.c @@ -174,6 +174,14 @@ static int __init davinci_ks_probe(struct platform_device *pdev) struct davinci_ks_platform_data *pdata = pdev->dev.platform_data; int error, i; + if (pdata->device_enable) { + error = pdata->device_enable(dev); + if (error < 0) { + dev_dbg(dev, "device enable function failed\n"); + return error; + } + } + if (!pdata->keymap) { dev_dbg(dev, "no keymap from pdata\n"); return -EINVAL; diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 0d1d33468b4..4f8fe0886b2 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -139,6 +139,7 @@ struct tp_finger { /* trackpad finger data size, empirically at least ten fingers */ #define SIZEOF_FINGER sizeof(struct tp_finger) #define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER) +#define MAX_FINGER_ORIENTATION 16384 /* device-specific parameters */ struct bcm5974_param { @@ -284,6 +285,26 @@ static void setup_events_to_report(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_Y, 0, cfg->y.dim, cfg->y.fuzz, 0); + /* finger touch area */ + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, + cfg->w.devmin, cfg->w.devmax, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, + cfg->w.devmin, cfg->w.devmax, 0, 0); + /* finger approach area */ + input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, + cfg->w.devmin, cfg->w.devmax, 0, 0); + input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR, + cfg->w.devmin, cfg->w.devmax, 0, 0); + /* finger orientation */ + input_set_abs_params(input_dev, ABS_MT_ORIENTATION, + -MAX_FINGER_ORIENTATION, + MAX_FINGER_ORIENTATION, 0, 0); + /* finger position */ + input_set_abs_params(input_dev, ABS_MT_POSITION_X, + cfg->x.devmin, cfg->x.devmax, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, + cfg->y.devmin, cfg->y.devmax, 0, 0); + __set_bit(EV_KEY, input_dev->evbit); __set_bit(BTN_TOUCH, input_dev->keybit); __set_bit(BTN_TOOL_FINGER, input_dev->keybit); @@ -310,13 +331,29 @@ static int report_bt_state(struct bcm5974 *dev, int size) return 0; } +static void report_finger_data(struct input_dev *input, + const struct bcm5974_config *cfg, + const struct tp_finger *f) +{ + input_report_abs(input, ABS_MT_TOUCH_MAJOR, raw2int(f->force_major)); + input_report_abs(input, ABS_MT_TOUCH_MINOR, raw2int(f->force_minor)); + input_report_abs(input, ABS_MT_WIDTH_MAJOR, raw2int(f->size_major)); + input_report_abs(input, ABS_MT_WIDTH_MINOR, raw2int(f->size_minor)); + input_report_abs(input, ABS_MT_ORIENTATION, + MAX_FINGER_ORIENTATION - raw2int(f->orientation)); + input_report_abs(input, ABS_MT_POSITION_X, raw2int(f->abs_x)); + input_report_abs(input, ABS_MT_POSITION_Y, + cfg->y.devmin + cfg->y.devmax - raw2int(f->abs_y)); + input_mt_sync(input); +} + /* report trackpad data as logical trackpad state */ static int report_tp_state(struct bcm5974 *dev, int size) { const struct bcm5974_config *c = &dev->cfg; const struct tp_finger *f; struct input_dev *input = dev->input; - int raw_p, raw_w, raw_x, raw_y, raw_n; + int raw_p, raw_w, raw_x, raw_y, raw_n, i; int ptest, origin, ibt = 0, nmin = 0, nmax = 0; int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0; @@ -329,6 +366,11 @@ static int report_tp_state(struct bcm5974 *dev, int size) /* always track the first finger; when detached, start over */ if (raw_n) { + + /* report raw trackpad data */ + for (i = 0; i < raw_n; i++) + report_finger_data(input, c, &f[i]); + raw_p = raw2int(f->force_major); raw_w = raw2int(f->size_major); raw_x = raw2int(f->abs_x); diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 401ac6b6edd..9774bdfaa48 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -627,8 +627,15 @@ static int psmouse_extensions(struct psmouse *psmouse, synaptics_hardware = true; if (max_proto > PSMOUSE_IMEX) { - if (!set_properties || synaptics_init(psmouse) == 0) +/* + * Try activating protocol, but check if support is enabled first, since + * we try detecting Synaptics even when protocol is disabled. + */ + if (synaptics_supported() && + (!set_properties || synaptics_init(psmouse) == 0)) { return PSMOUSE_SYNAPTICS; + } + /* * Some Synaptics touchpads can emulate extended protocols (like IMPS/2). * Unfortunately Logitech/Genius probes confuse some firmware versions so @@ -683,19 +690,6 @@ static int psmouse_extensions(struct psmouse *psmouse, max_proto = PSMOUSE_IMEX; } -/* - * Try Finger Sensing Pad - */ - if (max_proto > PSMOUSE_IMEX) { - if (fsp_detect(psmouse, set_properties) == 0) { - if (!set_properties || fsp_init(psmouse) == 0) - return PSMOUSE_FSP; -/* - * Init failed, try basic relative protocols - */ - max_proto = PSMOUSE_IMEX; - } - } if (max_proto > PSMOUSE_IMEX) { if (genius_detect(psmouse, set_properties) == 0) @@ -712,6 +706,21 @@ static int psmouse_extensions(struct psmouse *psmouse, } /* + * Try Finger Sensing Pad. We do it here because its probe upsets + * Trackpoint devices (causing TP_READ_ID command to time out). + */ + if (max_proto > PSMOUSE_IMEX) { + if (fsp_detect(psmouse, set_properties) == 0) { + if (!set_properties || fsp_init(psmouse) == 0) + return PSMOUSE_FSP; +/* + * Init failed, try basic relative protocols + */ + max_proto = PSMOUSE_IMEX; + } + } + +/* * Reset to defaults in case the device got confused by extended * protocol probes. Note that we follow up with full reset because * some mice put themselves to sleep when they see PSMOUSE_RESET_DIS. @@ -1450,24 +1459,10 @@ ssize_t psmouse_attr_show_helper(struct device *dev, struct device_attribute *de struct serio *serio = to_serio_port(dev); struct psmouse_attribute *attr = to_psmouse_attr(devattr); struct psmouse *psmouse; - int retval; - - retval = serio_pin_driver(serio); - if (retval) - return retval; - - if (serio->drv != &psmouse_drv) { - retval = -ENODEV; - goto out; - } psmouse = serio_get_drvdata(serio); - retval = attr->show(psmouse, attr->data, buf); - -out: - serio_unpin_driver(serio); - return retval; + return attr->show(psmouse, attr->data, buf); } ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *devattr, @@ -1478,18 +1473,9 @@ ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *dev struct psmouse *psmouse, *parent = NULL; int retval; - retval = serio_pin_driver(serio); - if (retval) - return retval; - - if (serio->drv != &psmouse_drv) { - retval = -ENODEV; - goto out_unpin; - } - retval = mutex_lock_interruptible(&psmouse_mutex); if (retval) - goto out_unpin; + goto out; psmouse = serio_get_drvdata(serio); @@ -1519,8 +1505,7 @@ ssize_t psmouse_attr_set_helper(struct device *dev, struct device_attribute *dev out_unlock: mutex_unlock(&psmouse_mutex); - out_unpin: - serio_unpin_driver(serio); + out: return retval; } @@ -1582,9 +1567,7 @@ static ssize_t psmouse_attr_set_protocol(struct psmouse *psmouse, void *data, co } mutex_unlock(&psmouse_mutex); - serio_unpin_driver(serio); serio_unregister_child_port(serio); - serio_pin_driver_uninterruptible(serio); mutex_lock(&psmouse_mutex); if (serio->drv != &psmouse_drv) { diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 77b9fd0b3fb..81a6b81cb2f 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -2,7 +2,7 @@ * Finger Sensing Pad PS/2 mouse driver. * * Copyright (C) 2005-2007 Asia Vital Components Co., Ltd. - * Copyright (C) 2005-2009 Tai-hwa Liang, Sentelic Corporation. + * Copyright (C) 2005-2010 Tai-hwa Liang, Sentelic Corporation. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -658,9 +658,9 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) if (packet[3] & BIT(1)) button_status |= 0x0f; /* wheel up */ if (packet[3] & BIT(2)) - button_status |= BIT(5);/* horizontal left */ + button_status |= BIT(4);/* horizontal left */ if (packet[3] & BIT(3)) - button_status |= BIT(4);/* horizontal right */ + button_status |= BIT(5);/* horizontal right */ /* push back to packet queue */ if (button_status != 0) packet[3] = button_status; diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 05689e73219..d3f5243fa09 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -743,6 +743,11 @@ int synaptics_init(struct psmouse *psmouse) return -1; } +bool synaptics_supported(void) +{ + return true; +} + #else /* CONFIG_MOUSE_PS2_SYNAPTICS */ void __init synaptics_module_init(void) @@ -754,5 +759,10 @@ int synaptics_init(struct psmouse *psmouse) return -ENOSYS; } +bool synaptics_supported(void) +{ + return false; +} + #endif /* CONFIG_MOUSE_PS2_SYNAPTICS */ diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index 838e7f2c9b3..f0f40a331dc 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -109,5 +109,6 @@ void synaptics_module_init(void); int synaptics_detect(struct psmouse *psmouse, bool set_properties); int synaptics_init(struct psmouse *psmouse); void synaptics_reset(struct psmouse *psmouse); +bool synaptics_supported(void); #endif /* _SYNAPTICS_H */ diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 64b688daf48..2a5982e532f 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -524,6 +524,13 @@ static const struct dmi_system_id __initconst i8042_dmi_laptop_table[] = { */ static const struct dmi_system_id __initconst i8042_dmi_dritek_table[] = { { + /* Acer Aspire 5610 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"), + }, + }, + { /* Acer Aspire 5630 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index 96faa799b82..f96feeb6b9c 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -660,7 +660,7 @@ static int smu_platform_probe(struct of_device* dev, return 0; } -static struct of_device_id smu_platform_match[] = +static const struct of_device_id smu_platform_match[] = { { .type = "smu", diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index ea32c7e5a9a..454bc501df3 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -2211,7 +2211,7 @@ static int fcu_of_remove(struct of_device* dev) return 0; } -static struct of_device_id fcu_match[] = +static const struct of_device_id fcu_match[] = { { .type = "fcu", diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index 3fbe41b0ac0..ba48fd76396 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -457,7 +457,7 @@ therm_of_remove( struct of_device *dev ) return 0; } -static struct of_device_id therm_of_match[] = {{ +static const struct of_device_id therm_of_match[] = {{ .name = "fan", .compatible = "adm1030" }, {} diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c index bff7a535603..b521ed9d6e2 100644 --- a/drivers/media/IR/ir-keytable.c +++ b/drivers/media/IR/ir-keytable.c @@ -13,7 +13,7 @@ */ -#include <linux/usb/input.h> +#include <linux/input.h> #include <media/ir-common.h> #define IR_TAB_MIN_SIZE 32 diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c index c190b0dedee..2833137fa81 100644 --- a/drivers/media/common/tuners/tda8290.c +++ b/drivers/media/common/tuners/tda8290.c @@ -144,7 +144,8 @@ static void set_audio(struct dvb_frontend *fe, } if (params->mode == V4L2_TUNER_RADIO) { - priv->tda8290_easy_mode = 0x01; /* Start with MN values */ + /* Set TDA8295 to FM radio; Start TDA8290 with MN values */ + priv->tda8290_easy_mode = (priv->ver & TDA8295) ? 0x80 : 0x01; tuner_dbg("setting to radio FM\n"); } else { tuner_dbg("setting tda829x to system %s\n", mode); @@ -672,16 +673,19 @@ static int tda8290_probe(struct tuner_i2c_props *i2c_props) static int tda8295_probe(struct tuner_i2c_props *i2c_props) { #define TDA8295_ID 0x8a +#define TDA8295C2_ID 0x8b unsigned char tda8295_id[] = { 0x2f, 0x00 }; /* detect tda8295 */ tuner_i2c_xfer_send(i2c_props, &tda8295_id[0], 1); tuner_i2c_xfer_recv(i2c_props, &tda8295_id[1], 1); - if (tda8295_id[1] == TDA8295_ID) { + if ((tda8295_id[1] & 0xfe) == TDA8295_ID) { if (debug) - printk(KERN_DEBUG "%s: tda8295 detected @ %d-%04x\n", - __func__, i2c_adapter_id(i2c_props->adap), + printk(KERN_DEBUG "%s: %s detected @ %d-%04x\n", + __func__, (tda8295_id[1] == TDA8295_ID) ? + "tda8295c1" : "tda8295c2", + i2c_adapter_id(i2c_props->adap), i2c_props->addr); return 0; } diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index 35d0817126e..cf8f65f309d 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -72,6 +72,10 @@ comment "Supported Earthsoft PT1 Adapters" depends on DVB_CORE && PCI && I2C source "drivers/media/dvb/pt1/Kconfig" +comment "Supported Mantis Adapters" + depends on DVB_CORE && PCI && I2C + source "drivers/media/dvb/mantis/Kconfig" + comment "Supported DVB Frontends" depends on DVB_CORE source "drivers/media/dvb/frontends/Kconfig" diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile index 16d262ddb45..c12922c3659 100644 --- a/drivers/media/dvb/Makefile +++ b/drivers/media/dvb/Makefile @@ -2,6 +2,18 @@ # Makefile for the kernel multimedia device drivers. # -obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/ pt1/ +obj-y := dvb-core/ \ + frontends/ \ + ttpci/ \ + ttusb-dec/ \ + ttusb-budget/ \ + b2c2/ \ + bt8xx/ \ + dvb-usb/ \ + pluto2/ \ + siano/ \ + dm1105/ \ + pt1/ \ + mantis/ obj-$(CONFIG_DVB_FIREDTV) += firewire/ diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index a3b8b697349..cd7f9b7cbff 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -208,6 +208,14 @@ config DVB_DS3000 help A DVB-S/S2 tuner module. Say Y when you want to support this frontend. +config DVB_MB86A16 + tristate "Fujitsu MB86A16 based" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A DVB-S/DSS Direct Conversion reveiver. + Say Y when you want to support this frontend. + comment "DVB-T (terrestrial) frontends" depends on DVB_CORE @@ -587,6 +595,17 @@ config DVB_ATBM8830 help A DMB-TH tuner module. Say Y when you want to support this frontend. +config DVB_TDA665x + tristate "TDA665x tuner" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + Support for tuner modules based on Philips TDA6650/TDA6651 chips. + Say Y when you want to support this chip. + + Currently supported tuners: + * Panasonic ENV57H12D5 (ET-50DT) + comment "Tools to develop new frontends" config DVB_DUMMY_FE diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 47575cc7b69..874e8ada4d1 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -64,6 +64,7 @@ obj-$(CONFIG_DVB_TDA10048) += tda10048.o obj-$(CONFIG_DVB_TUNER_CX24113) += cx24113.o obj-$(CONFIG_DVB_S5H1411) += s5h1411.o obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o +obj-$(CONFIG_DVB_TDA665x) += tda665x.o obj-$(CONFIG_DVB_LGS8GXX) += lgs8gxx.o obj-$(CONFIG_DVB_ATBM8830) += atbm8830.o obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o @@ -80,3 +81,4 @@ obj-$(CONFIG_DVB_STV6110x) += stv6110x.o obj-$(CONFIG_DVB_ISL6423) += isl6423.o obj-$(CONFIG_DVB_EC100) += ec100.o obj-$(CONFIG_DVB_DS3000) += ds3000.o +obj-$(CONFIG_DVB_MB86A16) += mb86a16.o diff --git a/drivers/media/dvb/frontends/dib8000.h b/drivers/media/dvb/frontends/dib8000.h index d99619ae983..b1ee2079963 100644 --- a/drivers/media/dvb/frontends/dib8000.h +++ b/drivers/media/dvb/frontends/dib8000.h @@ -100,7 +100,7 @@ static inline int dib8000_set_tune_state(struct dvb_frontend *fe, enum frontend_ static inline enum frontend_tune_state dib8000_get_tune_state(struct dvb_frontend *fe) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); - return CT_SHUTDOWN, + return CT_SHUTDOWN; } static inline void dib8000_pwm_agc_reset(struct dvb_frontend *fe) { diff --git a/drivers/media/dvb/frontends/lgdt3305.h b/drivers/media/dvb/frontends/lgdt3305.h index 4fa6e52d1fe..9cb11c9cae5 100644 --- a/drivers/media/dvb/frontends/lgdt3305.h +++ b/drivers/media/dvb/frontends/lgdt3305.h @@ -54,13 +54,13 @@ struct lgdt3305_config { u16 usref_qam256; /* default: 0x2a80 */ /* disable i2c repeater - 0:repeater enabled 1:repeater disabled */ - int deny_i2c_rptr:1; + unsigned int deny_i2c_rptr:1; /* spectral inversion - 0:disabled 1:enabled */ - int spectral_inversion:1; + unsigned int spectral_inversion:1; /* use RF AGC loop - 0:disabled 1:enabled */ - int rf_agc_loop:1; + unsigned int rf_agc_loop:1; enum lgdt3305_mpeg_mode mpeg_mode; enum lgdt3305_tp_clock_edge tpclk_edge; diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c new file mode 100644 index 00000000000..d05f7500e0c --- /dev/null +++ b/drivers/media/dvb/frontends/mb86a16.c @@ -0,0 +1,1878 @@ +/* + Fujitsu MB86A16 DVB-S/DSS DC Receiver driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> + +#include "dvb_frontend.h" +#include "mb86a16.h" +#include "mb86a16_priv.h" + +unsigned int verbose = 5; +module_param(verbose, int, 0644); + +#define ABS(x) ((x) < 0 ? (-x) : (x)) + +struct mb86a16_state { + struct i2c_adapter *i2c_adap; + const struct mb86a16_config *config; + struct dvb_frontend frontend; + + /* tuning parameters */ + int frequency; + int srate; + + /* Internal stuff */ + int master_clk; + int deci; + int csel; + int rsel; +}; + +#define MB86A16_ERROR 0 +#define MB86A16_NOTICE 1 +#define MB86A16_INFO 2 +#define MB86A16_DEBUG 3 + +#define dprintk(x, y, z, format, arg...) do { \ + if (z) { \ + if ((x > MB86A16_ERROR) && (x > y)) \ + printk(KERN_ERR "%s: " format "\n", __func__, ##arg); \ + else if ((x > MB86A16_NOTICE) && (x > y)) \ + printk(KERN_NOTICE "%s: " format "\n", __func__, ##arg); \ + else if ((x > MB86A16_INFO) && (x > y)) \ + printk(KERN_INFO "%s: " format "\n", __func__, ##arg); \ + else if ((x > MB86A16_DEBUG) && (x > y)) \ + printk(KERN_DEBUG "%s: " format "\n", __func__, ##arg); \ + } else { \ + if (x > y) \ + printk(format, ##arg); \ + } \ +} while (0) + +#define TRACE_IN dprintk(verbose, MB86A16_DEBUG, 1, "-->()") +#define TRACE_OUT dprintk(verbose, MB86A16_DEBUG, 1, "()-->") + +static int mb86a16_write(struct mb86a16_state *state, u8 reg, u8 val) +{ + int ret; + u8 buf[] = { reg, val }; + + struct i2c_msg msg = { + .addr = state->config->demod_address, + .flags = 0, + .buf = buf, + .len = 2 + }; + + dprintk(verbose, MB86A16_DEBUG, 1, + "writing to [0x%02x],Reg[0x%02x],Data[0x%02x]", + state->config->demod_address, buf[0], buf[1]); + + ret = i2c_transfer(state->i2c_adap, &msg, 1); + + return (ret != 1) ? -EREMOTEIO : 0; +} + +static int mb86a16_read(struct mb86a16_state *state, u8 reg, u8 *val) +{ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + + struct i2c_msg msg[] = { + { + .addr = state->config->demod_address, + .flags = 0, + .buf = b0, + .len = 1 + }, { + .addr = state->config->demod_address, + .flags = I2C_M_RD, + .buf = b1, + .len = 1 + } + }; + ret = i2c_transfer(state->i2c_adap, msg, 2); + if (ret != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "read error(reg=0x%02x, ret=0x%i)", + reg, ret); + + return -EREMOTEIO; + } + *val = b1[0]; + + return ret; +} + +static int CNTM_set(struct mb86a16_state *state, + unsigned char timint1, + unsigned char timint2, + unsigned char cnext) +{ + unsigned char val; + + val = (timint1 << 4) | (timint2 << 2) | cnext; + if (mb86a16_write(state, MB86A16_CNTMR, val) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int smrt_set(struct mb86a16_state *state, int rate) +{ + int tmp ; + int m ; + unsigned char STOFS0, STOFS1; + + m = 1 << state->deci; + tmp = (8192 * state->master_clk - 2 * m * rate * 8192 + state->master_clk / 2) / state->master_clk; + + STOFS0 = tmp & 0x0ff; + STOFS1 = (tmp & 0xf00) >> 8; + + if (mb86a16_write(state, MB86A16_SRATE1, (state->deci << 2) | + (state->csel << 1) | + state->rsel) < 0) + goto err; + if (mb86a16_write(state, MB86A16_SRATE2, STOFS0) < 0) + goto err; + if (mb86a16_write(state, MB86A16_SRATE3, STOFS1) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -1; +} + +static int srst(struct mb86a16_state *state) +{ + if (mb86a16_write(state, MB86A16_RESET, 0x04) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + +} + +static int afcex_data_set(struct mb86a16_state *state, + unsigned char AFCEX_L, + unsigned char AFCEX_H) +{ + if (mb86a16_write(state, MB86A16_AFCEXL, AFCEX_L) < 0) + goto err; + if (mb86a16_write(state, MB86A16_AFCEXH, AFCEX_H) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + + return -1; +} + +static int afcofs_data_set(struct mb86a16_state *state, + unsigned char AFCEX_L, + unsigned char AFCEX_H) +{ + if (mb86a16_write(state, 0x58, AFCEX_L) < 0) + goto err; + if (mb86a16_write(state, 0x59, AFCEX_H) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int stlp_set(struct mb86a16_state *state, + unsigned char STRAS, + unsigned char STRBS) +{ + if (mb86a16_write(state, MB86A16_STRFILTCOEF1, (STRBS << 3) | (STRAS)) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int Vi_set(struct mb86a16_state *state, unsigned char ETH, unsigned char VIA) +{ + if (mb86a16_write(state, MB86A16_VISET2, 0x04) < 0) + goto err; + if (mb86a16_write(state, MB86A16_VISET3, 0xf5) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int initial_set(struct mb86a16_state *state) +{ + if (stlp_set(state, 5, 7)) + goto err; + + udelay(100); + if (afcex_data_set(state, 0, 0)) + goto err; + + udelay(100); + if (afcofs_data_set(state, 0, 0)) + goto err; + + udelay(100); + if (mb86a16_write(state, MB86A16_CRLFILTCOEF1, 0x16) < 0) + goto err; + if (mb86a16_write(state, 0x2f, 0x21) < 0) + goto err; + if (mb86a16_write(state, MB86A16_VIMAG, 0x38) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS1, 0x00) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS2, 0x1c) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS3, 0x20) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS4, 0x1e) < 0) + goto err; + if (mb86a16_write(state, MB86A16_FAGCS5, 0x23) < 0) + goto err; + if (mb86a16_write(state, 0x54, 0xff) < 0) + goto err; + if (mb86a16_write(state, MB86A16_TSOUT, 0x00) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int S01T_set(struct mb86a16_state *state, + unsigned char s1t, + unsigned s0t) +{ + if (mb86a16_write(state, 0x33, (s1t << 3) | s0t) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + + +static int EN_set(struct mb86a16_state *state, + int cren, + int afcen) +{ + unsigned char val; + + val = 0x7a | (cren << 7) | (afcen << 2); + if (mb86a16_write(state, 0x49, val) < 0) + goto err; + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int AFCEXEN_set(struct mb86a16_state *state, + int afcexen, + int smrt) +{ + unsigned char AFCA ; + + if (smrt > 18875) + AFCA = 4; + else if (smrt > 9375) + AFCA = 3; + else if (smrt > 2250) + AFCA = 2; + else + AFCA = 1; + + if (mb86a16_write(state, 0x2a, 0x02 | (afcexen << 5) | (AFCA << 2)) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int DAGC_data_set(struct mb86a16_state *state, + unsigned char DAGCA, + unsigned char DAGCW) +{ + if (mb86a16_write(state, 0x2d, (DAGCA << 3) | DAGCW) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static void smrt_info_get(struct mb86a16_state *state, int rate) +{ + if (rate >= 37501) { + state->deci = 0; state->csel = 0; state->rsel = 0; + } else if (rate >= 30001) { + state->deci = 0; state->csel = 0; state->rsel = 1; + } else if (rate >= 26251) { + state->deci = 0; state->csel = 1; state->rsel = 0; + } else if (rate >= 22501) { + state->deci = 0; state->csel = 1; state->rsel = 1; + } else if (rate >= 18751) { + state->deci = 1; state->csel = 0; state->rsel = 0; + } else if (rate >= 15001) { + state->deci = 1; state->csel = 0; state->rsel = 1; + } else if (rate >= 13126) { + state->deci = 1; state->csel = 1; state->rsel = 0; + } else if (rate >= 11251) { + state->deci = 1; state->csel = 1; state->rsel = 1; + } else if (rate >= 9376) { + state->deci = 2; state->csel = 0; state->rsel = 0; + } else if (rate >= 7501) { + state->deci = 2; state->csel = 0; state->rsel = 1; + } else if (rate >= 6563) { + state->deci = 2; state->csel = 1; state->rsel = 0; + } else if (rate >= 5626) { + state->deci = 2; state->csel = 1; state->rsel = 1; + } else if (rate >= 4688) { + state->deci = 3; state->csel = 0; state->rsel = 0; + } else if (rate >= 3751) { + state->deci = 3; state->csel = 0; state->rsel = 1; + } else if (rate >= 3282) { + state->deci = 3; state->csel = 1; state->rsel = 0; + } else if (rate >= 2814) { + state->deci = 3; state->csel = 1; state->rsel = 1; + } else if (rate >= 2344) { + state->deci = 4; state->csel = 0; state->rsel = 0; + } else if (rate >= 1876) { + state->deci = 4; state->csel = 0; state->rsel = 1; + } else if (rate >= 1641) { + state->deci = 4; state->csel = 1; state->rsel = 0; + } else if (rate >= 1407) { + state->deci = 4; state->csel = 1; state->rsel = 1; + } else if (rate >= 1172) { + state->deci = 5; state->csel = 0; state->rsel = 0; + } else if (rate >= 939) { + state->deci = 5; state->csel = 0; state->rsel = 1; + } else if (rate >= 821) { + state->deci = 5; state->csel = 1; state->rsel = 0; + } else { + state->deci = 5; state->csel = 1; state->rsel = 1; + } + + if (state->csel == 0) + state->master_clk = 92000; + else + state->master_clk = 61333; + +} + +static int signal_det(struct mb86a16_state *state, + int smrt, + unsigned char *SIG) +{ + + int ret ; + int smrtd ; + int wait_sym ; + + u32 wait_t; + unsigned char S[3] ; + int i ; + + if (*SIG > 45) { + if (CNTM_set(state, 2, 1, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error"); + return -1; + } + wait_sym = 40000; + } else { + if (CNTM_set(state, 3, 1, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error"); + return -1; + } + wait_sym = 80000; + } + for (i = 0; i < 3; i++) { + if (i == 0) + smrtd = smrt * 98 / 100; + else if (i == 1) + smrtd = smrt; + else + smrtd = smrt * 102 / 100; + smrt_info_get(state, smrtd); + smrt_set(state, smrtd); + srst(state); + wait_t = (wait_sym + 99 * smrtd / 100) / smrtd; + if (wait_t == 0) + wait_t = 1; + msleep_interruptible(10); + if (mb86a16_read(state, 0x37, &(S[i])) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + } + if ((S[1] > S[0] * 112 / 100) && + (S[1] > S[2] * 112 / 100)) { + + ret = 1; + } else { + ret = 0; + } + *SIG = S[1]; + + if (CNTM_set(state, 0, 1, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set Error"); + return -1; + } + + return ret; +} + +static int rf_val_set(struct mb86a16_state *state, + int f, + int smrt, + unsigned char R) +{ + unsigned char C, F, B; + int M; + unsigned char rf_val[5]; + int ack = -1; + + if (smrt > 37750) + C = 1; + else if (smrt > 18875) + C = 2; + else if (smrt > 5500) + C = 3; + else + C = 4; + + if (smrt > 30500) + F = 3; + else if (smrt > 9375) + F = 1; + else if (smrt > 4625) + F = 0; + else + F = 2; + + if (f < 1060) + B = 0; + else if (f < 1175) + B = 1; + else if (f < 1305) + B = 2; + else if (f < 1435) + B = 3; + else if (f < 1570) + B = 4; + else if (f < 1715) + B = 5; + else if (f < 1845) + B = 6; + else if (f < 1980) + B = 7; + else if (f < 2080) + B = 8; + else + B = 9; + + M = f * (1 << R) / 2; + + rf_val[0] = 0x01 | (C << 3) | (F << 1); + rf_val[1] = (R << 5) | ((M & 0x1f000) >> 12); + rf_val[2] = (M & 0x00ff0) >> 4; + rf_val[3] = ((M & 0x0000f) << 4) | B; + + /* Frequency Set */ + if (mb86a16_write(state, 0x21, rf_val[0]) < 0) + ack = 0; + if (mb86a16_write(state, 0x22, rf_val[1]) < 0) + ack = 0; + if (mb86a16_write(state, 0x23, rf_val[2]) < 0) + ack = 0; + if (mb86a16_write(state, 0x24, rf_val[3]) < 0) + ack = 0; + if (mb86a16_write(state, 0x25, 0x01) < 0) + ack = 0; + if (ack == 0) { + dprintk(verbose, MB86A16_ERROR, 1, "RF Setup - I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int afcerr_chk(struct mb86a16_state *state) +{ + unsigned char AFCM_L, AFCM_H ; + int AFCM ; + int afcm, afcerr ; + + if (mb86a16_read(state, 0x0e, &AFCM_L) != 2) + goto err; + if (mb86a16_read(state, 0x0f, &AFCM_H) != 2) + goto err; + + AFCM = (AFCM_H << 8) + AFCM_L; + + if (AFCM > 2048) + afcm = AFCM - 4096; + else + afcm = AFCM; + afcerr = afcm * state->master_clk / 8192; + + return afcerr; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int dagcm_val_get(struct mb86a16_state *state) +{ + int DAGCM; + unsigned char DAGCM_H, DAGCM_L; + + if (mb86a16_read(state, 0x45, &DAGCM_L) != 2) + goto err; + if (mb86a16_read(state, 0x46, &DAGCM_H) != 2) + goto err; + + DAGCM = (DAGCM_H << 8) + DAGCM_L; + + return DAGCM; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int mb86a16_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + u8 stat, stat2; + struct mb86a16_state *state = fe->demodulator_priv; + + *status = 0; + + if (mb86a16_read(state, MB86A16_SIG1, &stat) != 2) + goto err; + if (mb86a16_read(state, MB86A16_SIG2, &stat2) != 2) + goto err; + if ((stat > 25) && (stat2 > 25)) + *status |= FE_HAS_SIGNAL; + if ((stat > 45) && (stat2 > 45)) + *status |= FE_HAS_CARRIER; + + if (mb86a16_read(state, MB86A16_STATUS, &stat) != 2) + goto err; + + if (stat & 0x01) + *status |= FE_HAS_SYNC; + if (stat & 0x01) + *status |= FE_HAS_VITERBI; + + if (mb86a16_read(state, MB86A16_FRAMESYNC, &stat) != 2) + goto err; + + if ((stat & 0x0f) && (*status & FE_HAS_VITERBI)) + *status |= FE_HAS_LOCK; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int sync_chk(struct mb86a16_state *state, + unsigned char *VIRM) +{ + unsigned char val; + int sync; + + if (mb86a16_read(state, 0x0d, &val) != 2) + goto err; + + dprintk(verbose, MB86A16_INFO, 1, "Status = %02x,", val); + sync = val & 0x01; + *VIRM = (val & 0x1c) >> 2; + + return sync; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + +} + +static int freqerr_chk(struct mb86a16_state *state, + int fTP, + int smrt, + int unit) +{ + unsigned char CRM, AFCML, AFCMH; + unsigned char temp1, temp2, temp3; + int crm, afcm, AFCM; + int crrerr, afcerr; /* kHz */ + int frqerr; /* MHz */ + int afcen, afcexen = 0; + int R, M, fOSC, fOSC_OFS; + + if (mb86a16_read(state, 0x43, &CRM) != 2) + goto err; + + if (CRM > 127) + crm = CRM - 256; + else + crm = CRM; + + crrerr = smrt * crm / 256; + if (mb86a16_read(state, 0x49, &temp1) != 2) + goto err; + + afcen = (temp1 & 0x04) >> 2; + if (afcen == 0) { + if (mb86a16_read(state, 0x2a, &temp1) != 2) + goto err; + afcexen = (temp1 & 0x20) >> 5; + } + + if (afcen == 1) { + if (mb86a16_read(state, 0x0e, &AFCML) != 2) + goto err; + if (mb86a16_read(state, 0x0f, &AFCMH) != 2) + goto err; + } else if (afcexen == 1) { + if (mb86a16_read(state, 0x2b, &AFCML) != 2) + goto err; + if (mb86a16_read(state, 0x2c, &AFCMH) != 2) + goto err; + } + if ((afcen == 1) || (afcexen == 1)) { + smrt_info_get(state, smrt); + AFCM = ((AFCMH & 0x01) << 8) + AFCML; + if (AFCM > 255) + afcm = AFCM - 512; + else + afcm = AFCM; + + afcerr = afcm * state->master_clk / 8192; + } else + afcerr = 0; + + if (mb86a16_read(state, 0x22, &temp1) != 2) + goto err; + if (mb86a16_read(state, 0x23, &temp2) != 2) + goto err; + if (mb86a16_read(state, 0x24, &temp3) != 2) + goto err; + + R = (temp1 & 0xe0) >> 5; + M = ((temp1 & 0x1f) << 12) + (temp2 << 4) + (temp3 >> 4); + if (R == 0) + fOSC = 2 * M; + else + fOSC = M; + + fOSC_OFS = fOSC - fTP; + + if (unit == 0) { /* MHz */ + if (crrerr + afcerr + fOSC_OFS * 1000 >= 0) + frqerr = (crrerr + afcerr + fOSC_OFS * 1000 + 500) / 1000; + else + frqerr = (crrerr + afcerr + fOSC_OFS * 1000 - 500) / 1000; + } else { /* kHz */ + frqerr = crrerr + afcerr + fOSC_OFS * 1000; + } + + return frqerr; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static unsigned char vco_dev_get(struct mb86a16_state *state, int smrt) +{ + unsigned char R; + + if (smrt > 9375) + R = 0; + else + R = 1; + + return R; +} + +static void swp_info_get(struct mb86a16_state *state, + int fOSC_start, + int smrt, + int v, int R, + int swp_ofs, + int *fOSC, + int *afcex_freq, + unsigned char *AFCEX_L, + unsigned char *AFCEX_H) +{ + int AFCEX ; + int crnt_swp_freq ; + + crnt_swp_freq = fOSC_start * 1000 + v * swp_ofs; + + if (R == 0) + *fOSC = (crnt_swp_freq + 1000) / 2000 * 2; + else + *fOSC = (crnt_swp_freq + 500) / 1000; + + if (*fOSC >= crnt_swp_freq) + *afcex_freq = *fOSC * 1000 - crnt_swp_freq; + else + *afcex_freq = crnt_swp_freq - *fOSC * 1000; + + AFCEX = *afcex_freq * 8192 / state->master_clk; + *AFCEX_L = AFCEX & 0x00ff; + *AFCEX_H = (AFCEX & 0x0f00) >> 8; +} + + +static int swp_freq_calcuation(struct mb86a16_state *state, int i, int v, int *V, int vmax, int vmin, + int SIGMIN, int fOSC, int afcex_freq, int swp_ofs, unsigned char *SIG1) +{ + int swp_freq ; + + if ((i % 2 == 1) && (v <= vmax)) { + /* positive v (case 1) */ + if ((v - 1 == vmin) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v - 1) >= 0) && + (*(V + 30 + v - 1) > *(V + 30 + v)) && + (*(V + 30 + v - 1) > SIGMIN)) { + + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs; + *SIG1 = *(V + 30 + v - 1); + } else if ((v == vmax) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v - 1) >= 0) && + (*(V + 30 + v) > *(V + 30 + v - 1)) && + (*(V + 30 + v) > SIGMIN)) { + /* (case 2) */ + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else if ((*(V + 30 + v) > 0) && + (*(V + 30 + v - 1) > 0) && + (*(V + 30 + v - 2) > 0) && + (*(V + 30 + v - 3) > 0) && + (*(V + 30 + v - 1) > *(V + 30 + v)) && + (*(V + 30 + v - 2) > *(V + 30 + v - 3)) && + ((*(V + 30 + v - 1) > SIGMIN) || + (*(V + 30 + v - 2) > SIGMIN))) { + /* (case 3) */ + if (*(V + 30 + v - 1) >= *(V + 30 + v - 2)) { + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs; + *SIG1 = *(V + 30 + v - 1); + } else { + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs * 2; + *SIG1 = *(V + 30 + v - 2); + } + } else if ((v == vmax) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v - 1) >= 0) && + (*(V + 30 + v - 2) >= 0) && + (*(V + 30 + v) > *(V + 30 + v - 2)) && + (*(V + 30 + v - 1) > *(V + 30 + v - 2)) && + ((*(V + 30 + v) > SIGMIN) || + (*(V + 30 + v - 1) > SIGMIN))) { + /* (case 4) */ + if (*(V + 30 + v) >= *(V + 30 + v - 1)) { + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else { + swp_freq = fOSC * 1000 + afcex_freq - swp_ofs; + *SIG1 = *(V + 30 + v - 1); + } + } else { + swp_freq = -1 ; + } + } else if ((i % 2 == 0) && (v >= vmin)) { + /* Negative v (case 1) */ + if ((*(V + 30 + v) > 0) && + (*(V + 30 + v + 1) > 0) && + (*(V + 30 + v + 2) > 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 1) > *(V + 30 + v + 2)) && + (*(V + 30 + v + 1) > SIGMIN)) { + + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } else if ((v + 1 == vmax) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 1) > SIGMIN)) { + /* (case 2) */ + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v); + } else if ((v == vmin) && + (*(V + 30 + v) > 0) && + (*(V + 30 + v + 1) > 0) && + (*(V + 30 + v + 2) > 0) && + (*(V + 30 + v) > *(V + 30 + v + 1)) && + (*(V + 30 + v) > *(V + 30 + v + 2)) && + (*(V + 30 + v) > SIGMIN)) { + /* (case 3) */ + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else if ((*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 2) >= 0) && + (*(V + 30 + v + 3) >= 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 2) > *(V + 30 + v + 3)) && + ((*(V + 30 + v + 1) > SIGMIN) || + (*(V + 30 + v + 2) > SIGMIN))) { + /* (case 4) */ + if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } else { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2; + *SIG1 = *(V + 30 + v + 2); + } + } else if ((*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 2) >= 0) && + (*(V + 30 + v + 3) >= 0) && + (*(V + 30 + v) > *(V + 30 + v + 2)) && + (*(V + 30 + v + 1) > *(V + 30 + v + 2)) && + (*(V + 30 + v) > *(V + 30 + v + 3)) && + (*(V + 30 + v + 1) > *(V + 30 + v + 3)) && + ((*(V + 30 + v) > SIGMIN) || + (*(V + 30 + v + 1) > SIGMIN))) { + /* (case 5) */ + if (*(V + 30 + v) >= *(V + 30 + v + 1)) { + swp_freq = fOSC * 1000 + afcex_freq; + *SIG1 = *(V + 30 + v); + } else { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } + } else if ((v + 2 == vmin) && + (*(V + 30 + v) >= 0) && + (*(V + 30 + v + 1) >= 0) && + (*(V + 30 + v + 2) >= 0) && + (*(V + 30 + v + 1) > *(V + 30 + v)) && + (*(V + 30 + v + 2) > *(V + 30 + v)) && + ((*(V + 30 + v + 1) > SIGMIN) || + (*(V + 30 + v + 2) > SIGMIN))) { + /* (case 6) */ + if (*(V + 30 + v + 1) >= *(V + 30 + v + 2)) { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs; + *SIG1 = *(V + 30 + v + 1); + } else { + swp_freq = fOSC * 1000 + afcex_freq + swp_ofs * 2; + *SIG1 = *(V + 30 + v + 2); + } + } else if ((vmax == 0) && (vmin == 0) && (*(V + 30 + v) > SIGMIN)) { + swp_freq = fOSC * 1000; + *SIG1 = *(V + 30 + v); + } else + swp_freq = -1; + } else + swp_freq = -1; + + return swp_freq; +} + +static void swp_info_get2(struct mb86a16_state *state, + int smrt, + int R, + int swp_freq, + int *afcex_freq, + int *fOSC, + unsigned char *AFCEX_L, + unsigned char *AFCEX_H) +{ + int AFCEX ; + + if (R == 0) + *fOSC = (swp_freq + 1000) / 2000 * 2; + else + *fOSC = (swp_freq + 500) / 1000; + + if (*fOSC >= swp_freq) + *afcex_freq = *fOSC * 1000 - swp_freq; + else + *afcex_freq = swp_freq - *fOSC * 1000; + + AFCEX = *afcex_freq * 8192 / state->master_clk; + *AFCEX_L = AFCEX & 0x00ff; + *AFCEX_H = (AFCEX & 0x0f00) >> 8; +} + +static void afcex_info_get(struct mb86a16_state *state, + int afcex_freq, + unsigned char *AFCEX_L, + unsigned char *AFCEX_H) +{ + int AFCEX ; + + AFCEX = afcex_freq * 8192 / state->master_clk; + *AFCEX_L = AFCEX & 0x00ff; + *AFCEX_H = (AFCEX & 0x0f00) >> 8; +} + +static int SEQ_set(struct mb86a16_state *state, unsigned char loop) +{ + /* SLOCK0 = 0 */ + if (mb86a16_write(state, 0x32, 0x02 | (loop << 2)) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int iq_vt_set(struct mb86a16_state *state, unsigned char IQINV) +{ + /* Viterbi Rate, IQ Settings */ + if (mb86a16_write(state, 0x06, 0xdf | (IQINV << 5)) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int FEC_srst(struct mb86a16_state *state) +{ + if (mb86a16_write(state, MB86A16_RESET, 0x02) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int S2T_set(struct mb86a16_state *state, unsigned char S2T) +{ + if (mb86a16_write(state, 0x34, 0x70 | S2T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + +static int S45T_set(struct mb86a16_state *state, unsigned char S4T, unsigned char S5T) +{ + if (mb86a16_write(state, 0x35, 0x00 | (S5T << 4) | S4T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + return 0; +} + + +static int mb86a16_set_fe(struct mb86a16_state *state) +{ + u8 agcval, cnmval; + + int i, j; + int fOSC = 0; + int fOSC_start = 0; + int wait_t; + int fcp; + int swp_ofs; + int V[60]; + u8 SIG1MIN; + + unsigned char CREN, AFCEN, AFCEXEN; + unsigned char SIG1; + unsigned char TIMINT1, TIMINT2, TIMEXT; + unsigned char S0T, S1T; + unsigned char S2T; +/* unsigned char S2T, S3T; */ + unsigned char S4T, S5T; + unsigned char AFCEX_L, AFCEX_H; + unsigned char R; + unsigned char VIRM; + unsigned char ETH, VIA; + unsigned char junk; + + int loop; + int ftemp; + int v, vmax, vmin; + int vmax_his, vmin_his; + int swp_freq, prev_swp_freq[20]; + int prev_freq_num; + int signal_dupl; + int afcex_freq; + int signal; + int afcerr; + int temp_freq, delta_freq; + int dagcm[4]; + int smrt_d; +/* int freq_err; */ + int n; + int ret = -1; + int sync; + + dprintk(verbose, MB86A16_INFO, 1, "freq=%d Mhz, symbrt=%d Ksps", state->frequency, state->srate); + + fcp = 3000; + swp_ofs = state->srate / 4; + + for (i = 0; i < 60; i++) + V[i] = -1; + + for (i = 0; i < 20; i++) + prev_swp_freq[i] = 0; + + SIG1MIN = 25; + + for (n = 0; ((n < 3) && (ret == -1)); n++) { + SEQ_set(state, 0); + iq_vt_set(state, 0); + + CREN = 0; + AFCEN = 0; + AFCEXEN = 1; + TIMINT1 = 0; + TIMINT2 = 1; + TIMEXT = 2; + S1T = 0; + S0T = 0; + + if (initial_set(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "initial set failed"); + return -1; + } + if (DAGC_data_set(state, 3, 2) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error"); + return -1; + } + if (EN_set(state, CREN, AFCEN) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "EN set error"); + return -1; /* (0, 0) */ + } + if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; /* (1, smrt) = (1, symbolrate) */ + } + if (CNTM_set(state, TIMINT1, TIMINT2, TIMEXT) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "CNTM set error"); + return -1; /* (0, 1, 2) */ + } + if (S01T_set(state, S1T, S0T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "S01T set error"); + return -1; /* (0, 0) */ + } + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt info get error"); + return -1; + } + + R = vco_dev_get(state, state->srate); + if (R == 1) + fOSC_start = state->frequency; + + else if (R == 0) { + if (state->frequency % 2 == 0) { + fOSC_start = state->frequency; + } else { + fOSC_start = state->frequency + 1; + if (fOSC_start > 2150) + fOSC_start = state->frequency - 1; + } + } + loop = 1; + ftemp = fOSC_start * 1000; + vmax = 0 ; + while (loop == 1) { + ftemp = ftemp + swp_ofs; + vmax++; + + /* Upper bound */ + if (ftemp > 2150000) { + loop = 0; + vmax--; + } else { + if ((ftemp == 2150000) || + (ftemp - state->frequency * 1000 >= fcp + state->srate / 4)) + loop = 0; + } + } + + loop = 1; + ftemp = fOSC_start * 1000; + vmin = 0 ; + while (loop == 1) { + ftemp = ftemp - swp_ofs; + vmin--; + + /* Lower bound */ + if (ftemp < 950000) { + loop = 0; + vmin++; + } else { + if ((ftemp == 950000) || + (state->frequency * 1000 - ftemp >= fcp + state->srate / 4)) + loop = 0; + } + } + + wait_t = (8000 + state->srate / 2) / state->srate; + if (wait_t == 0) + wait_t = 1; + + i = 0; + j = 0; + prev_freq_num = 0; + loop = 1; + signal = 0; + vmax_his = 0; + vmin_his = 0; + v = 0; + + while (loop == 1) { + swp_info_get(state, fOSC_start, state->srate, + v, R, swp_ofs, &fOSC, + &afcex_freq, &AFCEX_L, &AFCEX_H); + + udelay(100); + if (rf_val_set(state, fOSC, state->srate, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + udelay(100); + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + if (srst(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "srst error"); + return -1; + } + msleep_interruptible(wait_t); + + if (mb86a16_read(state, 0x37, &SIG1) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -1; + } + V[30 + v] = SIG1 ; + swp_freq = swp_freq_calcuation(state, i, v, V, vmax, vmin, + SIG1MIN, fOSC, afcex_freq, + swp_ofs, &SIG1); /* changed */ + + signal_dupl = 0; + for (j = 0; j < prev_freq_num; j++) { + if ((ABS(prev_swp_freq[j] - swp_freq)) < (swp_ofs * 3 / 2)) { + signal_dupl = 1; + dprintk(verbose, MB86A16_INFO, 1, "Probably Duplicate Signal, j = %d", j); + } + } + if ((signal_dupl == 0) && (swp_freq > 0) && (ABS(swp_freq - state->frequency * 1000) < fcp + state->srate / 6)) { + dprintk(verbose, MB86A16_DEBUG, 1, "------ Signal detect ------ [swp_freq=[%07d, srate=%05d]]", swp_freq, state->srate); + prev_swp_freq[prev_freq_num] = swp_freq; + prev_freq_num++; + swp_info_get2(state, state->srate, R, swp_freq, + &afcex_freq, &fOSC, + &AFCEX_L, &AFCEX_H); + + if (rf_val_set(state, fOSC, state->srate, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + signal = signal_det(state, state->srate, &SIG1); + if (signal == 1) { + dprintk(verbose, MB86A16_ERROR, 1, "***** Signal Found *****"); + loop = 0; + } else { + dprintk(verbose, MB86A16_ERROR, 1, "!!!!! No signal !!!!!, try again..."); + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + } + } + if (v > vmax) + vmax_his = 1 ; + if (v < vmin) + vmin_his = 1 ; + i++; + + if ((i % 2 == 1) && (vmax_his == 1)) + i++; + if ((i % 2 == 0) && (vmin_his == 1)) + i++; + + if (i % 2 == 1) + v = (i + 1) / 2; + else + v = -i / 2; + + if ((vmax_his == 1) && (vmin_his == 1)) + loop = 0 ; + } + + if (signal == 1) { + dprintk(verbose, MB86A16_INFO, 1, " Start Freq Error Check"); + S1T = 7 ; + S0T = 1 ; + CREN = 0 ; + AFCEN = 1 ; + AFCEXEN = 0 ; + + if (S01T_set(state, S1T, S0T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "S01T set error"); + return -1; + } + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + if (EN_set(state, CREN, AFCEN) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "EN set error"); + return -1; + } + if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; + } + afcex_info_get(state, afcex_freq, &AFCEX_L, &AFCEX_H); + if (afcofs_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCOFS data set error"); + return -1; + } + if (srst(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "srst error"); + return -1; + } + /* delay 4~200 */ + wait_t = 200000 / state->master_clk + 200000 / state->srate; + msleep(wait_t); + afcerr = afcerr_chk(state); + if (afcerr == -1) + return -1; + + swp_freq = fOSC * 1000 + afcerr ; + AFCEXEN = 1 ; + if (state->srate >= 1500) + smrt_d = state->srate / 3; + else + smrt_d = state->srate / 2; + smrt_info_get(state, smrt_d); + if (smrt_set(state, smrt_d) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + if (AFCEXEN_set(state, AFCEXEN, smrt_d) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; + } + R = vco_dev_get(state, smrt_d); + if (DAGC_data_set(state, 2, 0) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error"); + return -1; + } + for (i = 0; i < 3; i++) { + temp_freq = swp_freq + (i - 1) * state->srate / 8; + swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, smrt_d, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + wait_t = 200000 / state->master_clk + 40000 / smrt_d; + msleep(wait_t); + dagcm[i] = dagcm_val_get(state); + } + if ((dagcm[0] > dagcm[1]) && + (dagcm[0] > dagcm[2]) && + (dagcm[0] - dagcm[1] > 2 * (dagcm[2] - dagcm[1]))) { + + temp_freq = swp_freq - 2 * state->srate / 8; + swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, smrt_d, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set"); + return -1; + } + wait_t = 200000 / state->master_clk + 40000 / smrt_d; + msleep(wait_t); + dagcm[3] = dagcm_val_get(state); + if (dagcm[3] > dagcm[1]) + delta_freq = (dagcm[2] - dagcm[0] + dagcm[1] - dagcm[3]) * state->srate / 300; + else + delta_freq = 0; + } else if ((dagcm[2] > dagcm[1]) && + (dagcm[2] > dagcm[0]) && + (dagcm[2] - dagcm[1] > 2 * (dagcm[0] - dagcm[1]))) { + + temp_freq = swp_freq + 2 * state->srate / 8; + swp_info_get2(state, smrt_d, R, temp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, smrt_d, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set"); + return -1; + } + wait_t = 200000 / state->master_clk + 40000 / smrt_d; + msleep(wait_t); + dagcm[3] = dagcm_val_get(state); + if (dagcm[3] > dagcm[1]) + delta_freq = (dagcm[2] - dagcm[0] + dagcm[3] - dagcm[1]) * state->srate / 300; + else + delta_freq = 0 ; + + } else { + delta_freq = 0 ; + } + dprintk(verbose, MB86A16_INFO, 1, "SWEEP Frequency = %d", swp_freq); + swp_freq += delta_freq; + dprintk(verbose, MB86A16_INFO, 1, "Adjusting .., DELTA Freq = %d, SWEEP Freq=%d", delta_freq, swp_freq); + if (ABS(state->frequency * 1000 - swp_freq) > 3800) { + dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL !"); + } else { + + S1T = 0; + S0T = 3; + CREN = 1; + AFCEN = 0; + AFCEXEN = 1; + + if (S01T_set(state, S1T, S0T) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "S01T set error"); + return -1; + } + if (DAGC_data_set(state, 0, 0) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "DAGC data set error"); + return -1; + } + R = vco_dev_get(state, state->srate); + smrt_info_get(state, state->srate); + if (smrt_set(state, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "smrt set error"); + return -1; + } + if (EN_set(state, CREN, AFCEN) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "EN set error"); + return -1; + } + if (AFCEXEN_set(state, AFCEXEN, state->srate) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "AFCEXEN set error"); + return -1; + } + swp_info_get2(state, state->srate, R, swp_freq, &afcex_freq, &fOSC, &AFCEX_L, &AFCEX_H); + if (rf_val_set(state, fOSC, state->srate, R) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "rf val set error"); + return -1; + } + if (afcex_data_set(state, AFCEX_L, AFCEX_H) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "afcex data set error"); + return -1; + } + if (srst(state) < 0) { + dprintk(verbose, MB86A16_ERROR, 1, "srst error"); + return -1; + } + wait_t = 7 + (10000 + state->srate / 2) / state->srate; + if (wait_t == 0) + wait_t = 1; + msleep_interruptible(wait_t); + if (mb86a16_read(state, 0x37, &SIG1) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + if (SIG1 > 110) { + S2T = 4; S4T = 1; S5T = 6; ETH = 4; VIA = 6; + wait_t = 7 + (917504 + state->srate / 2) / state->srate; + } else if (SIG1 > 105) { + S2T = 4; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (1048576 + state->srate / 2) / state->srate; + } else if (SIG1 > 85) { + S2T = 5; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (1310720 + state->srate / 2) / state->srate; + } else if (SIG1 > 65) { + S2T = 6; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (1572864 + state->srate / 2) / state->srate; + } else { + S2T = 7; S4T = 2; S5T = 8; ETH = 7; VIA = 2; + wait_t = 7 + (2097152 + state->srate / 2) / state->srate; + } + wait_t *= 2; /* FOS */ + S2T_set(state, S2T); + S45T_set(state, S4T, S5T); + Vi_set(state, ETH, VIA); + srst(state); + msleep_interruptible(wait_t); + sync = sync_chk(state, &VIRM); + dprintk(verbose, MB86A16_INFO, 1, "-------- Viterbi=[%d] SYNC=[%d] ---------", VIRM, sync); + if (VIRM) { + if (VIRM == 4) { + /* 5/6 */ + if (SIG1 > 110) + wait_t = (786432 + state->srate / 2) / state->srate; + else + wait_t = (1572864 + state->srate / 2) / state->srate; + if (state->srate < 5000) + /* FIXME ! , should be a long wait ! */ + msleep_interruptible(wait_t); + else + msleep_interruptible(wait_t); + + if (sync_chk(state, &junk) == 0) { + iq_vt_set(state, 1); + FEC_srst(state); + } + } + /* 1/2, 2/3, 3/4, 7/8 */ + if (SIG1 > 110) + wait_t = (786432 + state->srate / 2) / state->srate; + else + wait_t = (1572864 + state->srate / 2) / state->srate; + msleep_interruptible(wait_t); + SEQ_set(state, 1); + } else { + dprintk(verbose, MB86A16_INFO, 1, "NO -- SYNC"); + SEQ_set(state, 1); + ret = -1; + } + } + } else { + dprintk(verbose, MB86A16_INFO, 1, "NO -- SIGNAL"); + ret = -1; + } + + sync = sync_chk(state, &junk); + if (sync) { + dprintk(verbose, MB86A16_INFO, 1, "******* SYNC *******"); + freqerr_chk(state, state->frequency, state->srate, 1); + ret = 0; + break; + } + } + + mb86a16_read(state, 0x15, &agcval); + mb86a16_read(state, 0x26, &cnmval); + dprintk(verbose, MB86A16_INFO, 1, "AGC = %02x CNM = %02x", agcval, cnmval); + + return ret; +} + +static int mb86a16_send_diseqc_msg(struct dvb_frontend *fe, + struct dvb_diseqc_master_cmd *cmd) +{ + struct mb86a16_state *state = fe->demodulator_priv; + int i; + u8 regs; + + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0) + goto err; + if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0) + goto err; + + regs = 0x18; + + if (cmd->msg_len > 5 || cmd->msg_len < 4) + return -EINVAL; + + for (i = 0; i < cmd->msg_len; i++) { + if (mb86a16_write(state, regs, cmd->msg[i]) < 0) + goto err; + + regs++; + } + i += 0x90; + + msleep_interruptible(10); + + if (mb86a16_write(state, MB86A16_DCC1, i) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int mb86a16_send_diseqc_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst) +{ + struct mb86a16_state *state = fe->demodulator_priv; + + switch (burst) { + case SEC_MINI_A: + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA | + MB86A16_DCC1_TBEN | + MB86A16_DCC1_TBO) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + break; + case SEC_MINI_B: + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA | + MB86A16_DCC1_TBEN) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + break; + } + + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int mb86a16_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + struct mb86a16_state *state = fe->demodulator_priv; + + switch (tone) { + case SEC_TONE_ON: + if (mb86a16_write(state, MB86A16_TONEOUT2, 0x00) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA | + MB86A16_DCC1_CTOE) < 0) + + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, MB86A16_DCCOUT_DISEN) < 0) + goto err; + break; + case SEC_TONE_OFF: + if (mb86a16_write(state, MB86A16_TONEOUT2, 0x04) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCC1, MB86A16_DCC1_DISTA) < 0) + goto err; + if (mb86a16_write(state, MB86A16_DCCOUT, 0x00) < 0) + goto err; + break; + default: + return -EINVAL; + } + return 0; + +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static enum dvbfe_search mb86a16_search(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct mb86a16_state *state = fe->demodulator_priv; + + state->frequency = p->frequency / 1000; + state->srate = p->u.qpsk.symbol_rate / 1000; + + if (!mb86a16_set_fe(state)) { + dprintk(verbose, MB86A16_ERROR, 1, "Succesfully acquired LOCK"); + return DVBFE_ALGO_SEARCH_SUCCESS; + } + + dprintk(verbose, MB86A16_ERROR, 1, "Lock acquisition failed!"); + return DVBFE_ALGO_SEARCH_FAILED; +} + +static void mb86a16_release(struct dvb_frontend *fe) +{ + struct mb86a16_state *state = fe->demodulator_priv; + kfree(state); +} + +static int mb86a16_init(struct dvb_frontend *fe) +{ + return 0; +} + +static int mb86a16_sleep(struct dvb_frontend *fe) +{ + return 0; +} + +static int mb86a16_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + u8 ber_mon, ber_tab, ber_lsb, ber_mid, ber_msb, ber_tim, ber_rst; + u32 timer; + + struct mb86a16_state *state = fe->demodulator_priv; + + *ber = 0; + if (mb86a16_read(state, MB86A16_BERMON, &ber_mon) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERTAB, &ber_tab) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERLSB, &ber_lsb) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERMID, &ber_mid) != 2) + goto err; + if (mb86a16_read(state, MB86A16_BERMSB, &ber_msb) != 2) + goto err; + /* BER monitor invalid when BER_EN = 0 */ + if (ber_mon & 0x04) { + /* coarse, fast calculation */ + *ber = ber_tab & 0x1f; + dprintk(verbose, MB86A16_DEBUG, 1, "BER coarse=[0x%02x]", *ber); + if (ber_mon & 0x01) { + /* + * BER_SEL = 1, The monitored BER is the estimated + * value with a Reed-Solomon decoder error amount at + * the deinterleaver output. + * monitored BER is expressed as a 20 bit output in total + */ + ber_rst = ber_mon >> 3; + *ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb; + if (ber_rst == 0) + timer = 12500000; + if (ber_rst == 1) + timer = 25000000; + if (ber_rst == 2) + timer = 50000000; + if (ber_rst == 3) + timer = 100000000; + + *ber /= timer; + dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber); + } else { + /* + * BER_SEL = 0, The monitored BER is the estimated + * value with a Viterbi decoder error amount at the + * QPSK demodulator output. + * monitored BER is expressed as a 24 bit output in total + */ + ber_tim = ber_mon >> 1; + *ber = (((ber_msb << 8) | ber_mid) << 8) | ber_lsb; + if (ber_tim == 0) + timer = 16; + if (ber_tim == 1) + timer = 24; + + *ber /= 2 ^ timer; + dprintk(verbose, MB86A16_DEBUG, 1, "BER fine=[0x%02x]", *ber); + } + } + return 0; +err: + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; +} + +static int mb86a16_read_signal_strength(struct dvb_frontend *fe, u16 *strength) +{ + u8 agcm = 0; + struct mb86a16_state *state = fe->demodulator_priv; + + *strength = 0; + if (mb86a16_read(state, MB86A16_AGCM, &agcm) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + *strength = ((0xff - agcm) * 100) / 256; + dprintk(verbose, MB86A16_DEBUG, 1, "Signal strength=[%d %%]", (u8) *strength); + *strength = (0xffff - 0xff) + agcm; + + return 0; +} + +struct cnr { + u8 cn_reg; + u8 cn_val; +}; + +static const struct cnr cnr_tab[] = { + { 35, 2 }, + { 40, 3 }, + { 50, 4 }, + { 60, 5 }, + { 70, 6 }, + { 80, 7 }, + { 92, 8 }, + { 103, 9 }, + { 115, 10 }, + { 138, 12 }, + { 162, 15 }, + { 180, 18 }, + { 185, 19 }, + { 189, 20 }, + { 195, 22 }, + { 199, 24 }, + { 201, 25 }, + { 202, 26 }, + { 203, 27 }, + { 205, 28 }, + { 208, 30 } +}; + +static int mb86a16_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + struct mb86a16_state *state = fe->demodulator_priv; + int i = 0; + int low_tide = 2, high_tide = 30, q_level; + u8 cn; + + *snr = 0; + if (mb86a16_read(state, 0x26, &cn) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + + for (i = 0; i < ARRAY_SIZE(cnr_tab); i++) { + if (cn < cnr_tab[i].cn_reg) { + *snr = cnr_tab[i].cn_val; + break; + } + } + q_level = (*snr * 100) / (high_tide - low_tide); + dprintk(verbose, MB86A16_ERROR, 1, "SNR (Quality) = [%d dB], Level=%d %%", *snr, q_level); + *snr = (0xffff - 0xff) + *snr; + + return 0; +} + +static int mb86a16_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + u8 dist; + struct mb86a16_state *state = fe->demodulator_priv; + + if (mb86a16_read(state, MB86A16_DISTMON, &dist) != 2) { + dprintk(verbose, MB86A16_ERROR, 1, "I2C transfer error"); + return -EREMOTEIO; + } + *ucblocks = dist; + + return 0; +} + +static enum dvbfe_algo mb86a16_frontend_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_CUSTOM; +} + +static struct dvb_frontend_ops mb86a16_ops = { + .info = { + .name = "Fujitsu MB86A16 DVB-S", + .type = FE_QPSK, + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 3000, + .frequency_tolerance = 0, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, + .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | + FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | + FE_CAN_FEC_7_8 | FE_CAN_QPSK | + FE_CAN_FEC_AUTO + }, + .release = mb86a16_release, + + .get_frontend_algo = mb86a16_frontend_algo, + .search = mb86a16_search, + .read_status = mb86a16_read_status, + .init = mb86a16_init, + .sleep = mb86a16_sleep, + .read_status = mb86a16_read_status, + + .read_ber = mb86a16_read_ber, + .read_signal_strength = mb86a16_read_signal_strength, + .read_snr = mb86a16_read_snr, + .read_ucblocks = mb86a16_read_ucblocks, + + .diseqc_send_master_cmd = mb86a16_send_diseqc_msg, + .diseqc_send_burst = mb86a16_send_diseqc_burst, + .set_tone = mb86a16_set_tone, +}; + +struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, + struct i2c_adapter *i2c_adap) +{ + u8 dev_id = 0; + struct mb86a16_state *state = NULL; + + state = kmalloc(sizeof(struct mb86a16_state), GFP_KERNEL); + if (state == NULL) + goto error; + + state->config = config; + state->i2c_adap = i2c_adap; + + mb86a16_read(state, 0x7f, &dev_id); + if (dev_id != 0xfe) + goto error; + + memcpy(&state->frontend.ops, &mb86a16_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + state->frontend.ops.set_voltage = state->config->set_voltage; + + return &state->frontend; +error: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(mb86a16_attach); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Manu Abraham"); diff --git a/drivers/media/dvb/frontends/mb86a16.h b/drivers/media/dvb/frontends/mb86a16.h new file mode 100644 index 00000000000..6ea8c376394 --- /dev/null +++ b/drivers/media/dvb/frontends/mb86a16.h @@ -0,0 +1,52 @@ +/* + Fujitsu MB86A16 DVB-S/DSS DC Receiver driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MB86A16_H +#define __MB86A16_H + +#include <linux/dvb/frontend.h> +#include "dvb_frontend.h" + + +struct mb86a16_config { + u8 demod_address; + + int (*set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage); +}; + + + +#if defined(CONFIG_DVB_MB86A16) || (defined(CONFIG_DVB_MB86A16_MODULE) && defined(MODULE)) + +extern struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, + struct i2c_adapter *i2c_adap); + +#else + +static inline struct dvb_frontend *mb86a16_attach(const struct mb86a16_config *config, + struct i2c_adapter *i2c_adap) +{ + printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); + return NULL; +} + +#endif /* CONFIG_DVB_MB86A16 */ + +#endif /* __MB86A16_H */ diff --git a/drivers/media/dvb/frontends/mb86a16_priv.h b/drivers/media/dvb/frontends/mb86a16_priv.h new file mode 100644 index 00000000000..360a35acfe8 --- /dev/null +++ b/drivers/media/dvb/frontends/mb86a16_priv.h @@ -0,0 +1,151 @@ +/* + Fujitsu MB86A16 DVB-S/DSS DC Receiver driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MB86A16_PRIV_H +#define __MB86A16_PRIV_H + +#define MB86A16_TSOUT 0x00 +#define MB86A16_TSOUT_HIZSEL (0x01 << 5) +#define MB86A16_TSOUT_HIZCNTI (0x01 << 4) +#define MB86A16_TSOUT_MODE (0x01 << 3) +#define MB86A16_TSOUT_ORDER (0x01 << 2) +#define MB86A16_TSOUT_ERROR (0x01 << 1) +#define Mb86A16_TSOUT_EDGE (0x01 << 0) + +#define MB86A16_FEC 0x01 +#define MB86A16_FEC_FSYNC (0x01 << 5) +#define MB86A16_FEC_PCKB8 (0x01 << 4) +#define MB86A16_FEC_DVDS (0x01 << 3) +#define MB86A16_FEC_EREN (0x01 << 2) +#define Mb86A16_FEC_RSEN (0x01 << 1) +#define MB86A16_FEC_DIEN (0x01 << 0) + +#define MB86A16_AGC 0x02 +#define MB86A16_AGC_AGMD (0x01 << 6) +#define MB86A16_AGC_AGCW (0x0f << 2) +#define MB86A16_AGC_AGCP (0x01 << 1) +#define MB86A16_AGC_AGCR (0x01 << 0) + +#define MB86A16_SRATE1 0x03 +#define MB86A16_SRATE1_DECI (0x07 << 2) +#define MB86A16_SRATE1_CSEL (0x01 << 1) +#define MB86A16_SRATE1_RSEL (0x01 << 0) + +#define MB86A16_SRATE2 0x04 +#define MB86A16_SRATE2_STOFSL (0xff << 0) + +#define MB86A16_SRATE3 0x05 +#define MB86A16_SRATE2_STOFSH (0xff << 0) + +#define MB86A16_VITERBI 0x06 +#define MB86A16_FRAMESYNC 0x07 +#define MB86A16_CRLFILTCOEF1 0x08 +#define MB86A16_CRLFILTCOEF2 0x09 +#define MB86A16_STRFILTCOEF1 0x0a +#define MB86A16_STRFILTCOEF2 0x0b +#define MB86A16_RESET 0x0c +#define MB86A16_STATUS 0x0d +#define MB86A16_AFCML 0x0e +#define MB86A16_AFCMH 0x0f +#define MB86A16_BERMON 0x10 +#define MB86A16_BERTAB 0x11 +#define MB86A16_BERLSB 0x12 +#define MB86A16_BERMID 0x13 +#define MB86A16_BERMSB 0x14 +#define MB86A16_AGCM 0x15 + +#define MB86A16_DCC1 0x16 +#define MB86A16_DCC1_DISTA (0x01 << 7) +#define MB86A16_DCC1_PRTY (0x01 << 6) +#define MB86A16_DCC1_CTOE (0x01 << 5) +#define MB86A16_DCC1_TBEN (0x01 << 4) +#define MB86A16_DCC1_TBO (0x01 << 3) +#define MB86A16_DCC1_NUM (0x07 << 0) + +#define MB86A16_DCC2 0x17 +#define MB86A16_DCC2_DCBST (0x01 << 0) + +#define MB86A16_DCC3 0x18 +#define MB86A16_DCC3_CODE0 (0xff << 0) + +#define MB86A16_DCC4 0x19 +#define MB86A16_DCC4_CODE1 (0xff << 0) + +#define MB86A16_DCC5 0x1a +#define MB86A16_DCC5_CODE2 (0xff << 0) + +#define MB86A16_DCC6 0x1b +#define MB86A16_DCC6_CODE3 (0xff << 0) + +#define MB86A16_DCC7 0x1c +#define MB86A16_DCC7_CODE4 (0xff << 0) + +#define MB86A16_DCC8 0x1d +#define MB86A16_DCC8_CODE5 (0xff << 0) + +#define MB86A16_DCCOUT 0x1e +#define MB86A16_DCCOUT_DISEN (0x01 << 0) + +#define MB86A16_TONEOUT1 0x1f +#define MB86A16_TONE_TDIVL (0xff << 0) + +#define MB86A16_TONEOUT2 0x20 +#define MB86A16_TONE_TMD (0x03 << 2) +#define MB86A16_TONE_TDIVH (0x03 << 0) + +#define MB86A16_FREQ1 0x21 +#define MB86A16_FREQ2 0x22 +#define MB86A16_FREQ3 0x23 +#define MB86A16_FREQ4 0x24 +#define MB86A16_FREQSET 0x25 +#define MB86A16_CNM 0x26 +#define MB86A16_PORT0 0x27 +#define MB86A16_PORT1 0x28 +#define MB86A16_DRCFILT 0x29 +#define MB86A16_AFC 0x2a +#define MB86A16_AFCEXL 0x2b +#define MB86A16_AFCEXH 0x2c +#define MB86A16_DAGC 0x2d +#define MB86A16_SEQMODE 0x32 +#define MB86A16_S0S1T 0x33 +#define MB86A16_S2S3T 0x34 +#define MB86A16_S4S5T 0x35 +#define MB86A16_CNTMR 0x36 +#define MB86A16_SIG1 0x37 +#define MB86A16_SIG2 0x38 +#define MB86A16_VIMAG 0x39 +#define MB86A16_VISET1 0x3a +#define MB86A16_VISET2 0x3b +#define MB86A16_VISET3 0x3c +#define MB86A16_FAGCS1 0x3d +#define MB86A16_FAGCS2 0x3e +#define MB86A16_FAGCS3 0x3f +#define MB86A16_FAGCS4 0x40 +#define MB86A16_FAGCS5 0x41 +#define MB86A16_FAGCS6 0x42 +#define MB86A16_CRM 0x43 +#define MB86A16_STRM 0x44 +#define MB86A16_DAGCML 0x45 +#define MB86A16_DAGCMH 0x46 +#define MB86A16_QPSKTST 0x49 +#define MB86A16_DISTMON 0x52 +#define MB86A16_VERSION 0x7f + +#endif /* __MB86A16_PRIV_H */ diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c index 6c1dbf9288d..6ca533ea0f0 100644 --- a/drivers/media/dvb/frontends/tda10021.c +++ b/drivers/media/dvb/frontends/tda10021.c @@ -426,6 +426,10 @@ struct dvb_frontend* tda10021_attach(const struct tda1002x_config* config, id = tda10021_readreg(state, 0x1a); if ((id & 0xf0) != 0x70) goto error; + /* Don't claim TDA10023 */ + if (id == 0x7d) + goto error; + printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n", state->config->demod_address, id); diff --git a/drivers/media/dvb/frontends/tda665x.c b/drivers/media/dvb/frontends/tda665x.c new file mode 100644 index 00000000000..87d52739c82 --- /dev/null +++ b/drivers/media/dvb/frontends/tda665x.c @@ -0,0 +1,257 @@ +/* + TDA665x tuner driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include "dvb_frontend.h" +#include "tda665x.h" + +struct tda665x_state { + struct dvb_frontend *fe; + struct i2c_adapter *i2c; + const struct tda665x_config *config; + + u32 frequency; + u32 bandwidth; +}; + +static int tda665x_read(struct tda665x_state *state, u8 *buf) +{ + const struct tda665x_config *config = state->config; + int err = 0; + struct i2c_msg msg = { .addr = config->addr, .flags = I2C_M_RD, .buf = buf, .len = 2 }; + + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) + goto exit; + + return err; +exit: + printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err); + return err; +} + +static int tda665x_write(struct tda665x_state *state, u8 *buf, u8 length) +{ + const struct tda665x_config *config = state->config; + int err = 0; + struct i2c_msg msg = { .addr = config->addr, .flags = 0, .buf = buf, .len = length }; + + err = i2c_transfer(state->i2c, &msg, 1); + if (err != 1) + goto exit; + + return err; +exit: + printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err); + return err; +} + +static int tda665x_get_state(struct dvb_frontend *fe, + enum tuner_param param, + struct tuner_state *tstate) +{ + struct tda665x_state *state = fe->tuner_priv; + int err = 0; + + switch (param) { + case DVBFE_TUNER_FREQUENCY: + tstate->frequency = state->frequency; + break; + case DVBFE_TUNER_BANDWIDTH: + break; + default: + printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param); + err = -EINVAL; + break; + } + + return err; +} + +static int tda665x_get_status(struct dvb_frontend *fe, u32 *status) +{ + struct tda665x_state *state = fe->tuner_priv; + u8 result = 0; + int err = 0; + + *status = 0; + + err = tda665x_read(state, &result); + if (err < 0) + goto exit; + + if ((result >> 6) & 0x01) { + printk(KERN_DEBUG "%s: Tuner Phase Locked\n", __func__); + *status = 1; + } + + return err; +exit: + printk(KERN_ERR "%s: I/O Error\n", __func__); + return err; +} + +static int tda665x_set_state(struct dvb_frontend *fe, + enum tuner_param param, + struct tuner_state *tstate) +{ + struct tda665x_state *state = fe->tuner_priv; + const struct tda665x_config *config = state->config; + u32 frequency, status = 0; + u8 buf[4]; + int err = 0; + + if (param & DVBFE_TUNER_FREQUENCY) { + + frequency = tstate->frequency; + if ((frequency < config->frequency_max) || (frequency > config->frequency_min)) { + printk(KERN_ERR "%s: Frequency beyond limits, frequency=%d\n", __func__, frequency); + return -EINVAL; + } + + frequency += config->frequency_offst; + frequency *= config->ref_multiplier; + frequency += config->ref_divider >> 1; + frequency /= config->ref_divider; + + buf[0] = (u8) (frequency & 0x7f00) >> 8; + buf[1] = (u8) (frequency & 0x00ff) >> 0; + buf[2] = 0x80 | 0x40 | 0x02; + buf[3] = 0x00; + + /* restore frequency */ + frequency = tstate->frequency; + + if (frequency < 153000000) { + /* VHF-L */ + buf[3] |= 0x01; /* fc, Low Band, 47 - 153 MHz */ + if (frequency < 68000000) + buf[3] |= 0x40; /* 83uA */ + if (frequency < 1040000000) + buf[3] |= 0x60; /* 122uA */ + if (frequency < 1250000000) + buf[3] |= 0x80; /* 163uA */ + else + buf[3] |= 0xa0; /* 254uA */ + } else if (frequency < 438000000) { + /* VHF-H */ + buf[3] |= 0x02; /* fc, Mid Band, 153 - 438 MHz */ + if (frequency < 230000000) + buf[3] |= 0x40; + if (frequency < 300000000) + buf[3] |= 0x60; + else + buf[3] |= 0x80; + } else { + /* UHF */ + buf[3] |= 0x04; /* fc, High Band, 438 - 862 MHz */ + if (frequency < 470000000) + buf[3] |= 0x60; + if (frequency < 526000000) + buf[3] |= 0x80; + else + buf[3] |= 0xa0; + } + + /* Set params */ + err = tda665x_write(state, buf, 5); + if (err < 0) + goto exit; + + /* sleep for some time */ + printk(KERN_DEBUG "%s: Waiting to Phase LOCK\n", __func__); + msleep(20); + /* check status */ + err = tda665x_get_status(fe, &status); + if (err < 0) + goto exit; + + if (status == 1) { + printk(KERN_DEBUG "%s: Tuner Phase locked: status=%d\n", __func__, status); + state->frequency = frequency; /* cache successful state */ + } else { + printk(KERN_ERR "%s: No Phase lock: status=%d\n", __func__, status); + } + } else { + printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param); + return -EINVAL; + } + + return 0; +exit: + printk(KERN_ERR "%s: I/O Error\n", __func__); + return err; +} + +static int tda665x_release(struct dvb_frontend *fe) +{ + struct tda665x_state *state = fe->tuner_priv; + + fe->tuner_priv = NULL; + kfree(state); + return 0; +} + +static struct dvb_tuner_ops tda665x_ops = { + + .set_state = tda665x_set_state, + .get_state = tda665x_get_state, + .get_status = tda665x_get_status, + .release = tda665x_release +}; + +struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, + const struct tda665x_config *config, + struct i2c_adapter *i2c) +{ + struct tda665x_state *state = NULL; + struct dvb_tuner_info *info; + + state = kzalloc(sizeof(struct tda665x_state), GFP_KERNEL); + if (state == NULL) + goto exit; + + state->config = config; + state->i2c = i2c; + state->fe = fe; + fe->tuner_priv = state; + fe->ops.tuner_ops = tda665x_ops; + info = &fe->ops.tuner_ops.info; + + memcpy(info->name, config->name, sizeof(config->name)); + info->frequency_min = config->frequency_min; + info->frequency_max = config->frequency_max; + info->frequency_step = config->frequency_offst; + + printk(KERN_DEBUG "%s: Attaching TDA665x (%s) tuner\n", __func__, info->name); + + return fe; + +exit: + kfree(state); + return NULL; +} +EXPORT_SYMBOL(tda665x_attach); + +MODULE_DESCRIPTION("TDA665x driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/tda665x.h b/drivers/media/dvb/frontends/tda665x.h new file mode 100644 index 00000000000..ec7927aa75a --- /dev/null +++ b/drivers/media/dvb/frontends/tda665x.h @@ -0,0 +1,52 @@ +/* + TDA665x tuner driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __TDA665x_H +#define __TDA665x_H + +struct tda665x_config { + char name[128]; + + u8 addr; + u32 frequency_min; + u32 frequency_max; + u32 frequency_offst; + u32 ref_multiplier; + u32 ref_divider; +}; + +#if defined(CONFIG_DVB_TDA665x) || (defined(CONFIG_DVB_TDA665x_MODULE) && defined(MODULE)) + +extern struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, + const struct tda665x_config *config, + struct i2c_adapter *i2c); + +#else + +static inline struct dvb_frontend *tda665x_attach(struct dvb_frontend *fe, + const struct tda665x_config *config, + struct i2c_adapter *i2c) +{ + printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__); + return NULL; +} + +#endif /* CONFIG_DVB_TDA665x */ + +#endif /* __TDA665x_H */ diff --git a/drivers/media/dvb/mantis/Kconfig b/drivers/media/dvb/mantis/Kconfig new file mode 100644 index 00000000000..f7b72a32adf --- /dev/null +++ b/drivers/media/dvb/mantis/Kconfig @@ -0,0 +1,32 @@ +config MANTIS_CORE + tristate "Mantis/Hopper PCI bridge based devices" + depends on PCI && I2C && INPUT + + help + Support for PCI cards based on the Mantis and Hopper PCi bridge. + + Say Y if you own such a device and want to use it. + +config DVB_MANTIS + tristate "MANTIS based cards" + depends on MANTIS_CORE && DVB_CORE && PCI && I2C + select DVB_MB86A16 + select DVB_ZL10353 + select DVB_STV0299 + select DVB_PLL + help + Support for PCI cards based on the Mantis PCI bridge. + Say Y when you have a Mantis based DVB card and want to use it. + + If unsure say N. + +config DVB_HOPPER + tristate "HOPPER based cards" + depends on MANTIS_CORE && DVB_CORE && PCI && I2C + select DVB_ZL10353 + select DVB_PLL + help + Support for PCI cards based on the Hopper PCI bridge. + Say Y when you have a Hopper based DVB card and want to use it. + + If unsure say N diff --git a/drivers/media/dvb/mantis/Makefile b/drivers/media/dvb/mantis/Makefile new file mode 100644 index 00000000000..98dc5cd258a --- /dev/null +++ b/drivers/media/dvb/mantis/Makefile @@ -0,0 +1,28 @@ +mantis_core-objs := mantis_ioc.o \ + mantis_uart.o \ + mantis_dma.o \ + mantis_pci.o \ + mantis_i2c.o \ + mantis_dvb.o \ + mantis_evm.o \ + mantis_hif.o \ + mantis_ca.o \ + mantis_pcmcia.o \ + mantis_input.o + +mantis-objs := mantis_cards.o \ + mantis_vp1033.o \ + mantis_vp1034.o \ + mantis_vp1041.o \ + mantis_vp2033.o \ + mantis_vp2040.o \ + mantis_vp3030.o + +hopper-objs := hopper_cards.o \ + hopper_vp3028.o + +obj-$(CONFIG_MANTIS_CORE) += mantis_core.o +obj-$(CONFIG_DVB_MANTIS) += mantis.o +obj-$(CONFIG_DVB_HOPPER) += hopper.o + +EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c new file mode 100644 index 00000000000..d073c61e3c0 --- /dev/null +++ b/drivers/media/dvb/mantis/hopper_cards.c @@ -0,0 +1,275 @@ +/* + Hopper PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <asm/irq.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "hopper_vp3028.h" +#include "mantis_dma.h" +#include "mantis_dvb.h" +#include "mantis_uart.h" +#include "mantis_ioc.h" +#include "mantis_pci.h" +#include "mantis_i2c.h" +#include "mantis_reg.h" + +static unsigned int verbose; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)"); + +#define DRIVER_NAME "Hopper" + +static char *label[10] = { + "DMA", + "IRQ-0", + "IRQ-1", + "OCERR", + "PABRT", + "RIPRR", + "PPERR", + "FTRGT", + "RISCI", + "RACK" +}; + +static int devs; + +static irqreturn_t hopper_irq_handler(int irq, void *dev_id) +{ + u32 stat = 0, mask = 0, lstat = 0, mstat = 0; + u32 rst_stat = 0, rst_mask = 0; + + struct mantis_pci *mantis; + struct mantis_ca *ca; + + mantis = (struct mantis_pci *) dev_id; + if (unlikely(mantis == NULL)) { + dprintk(MANTIS_ERROR, 1, "Mantis == NULL"); + return IRQ_NONE; + } + ca = mantis->mantis_ca; + + stat = mmread(MANTIS_INT_STAT); + mask = mmread(MANTIS_INT_MASK); + mstat = lstat = stat & ~MANTIS_INT_RISCSTAT; + if (!(stat & mask)) + return IRQ_NONE; + + rst_mask = MANTIS_GPIF_WRACK | + MANTIS_GPIF_OTHERR | + MANTIS_SBUF_WSTO | + MANTIS_GPIF_EXTIRQ; + + rst_stat = mmread(MANTIS_GPIF_STATUS); + rst_stat &= rst_mask; + mmwrite(rst_stat, MANTIS_GPIF_STATUS); + + mantis->mantis_int_stat = stat; + mantis->mantis_int_mask = mask; + dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask); + if (stat & MANTIS_INT_RISCEN) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]); + } + if (stat & MANTIS_INT_IRQ0) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]); + mantis->gpif_status = rst_stat; + wake_up(&ca->hif_write_wq); + schedule_work(&ca->hif_evm_work); + } + if (stat & MANTIS_INT_IRQ1) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]); + schedule_work(&mantis->uart_work); + } + if (stat & MANTIS_INT_OCERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]); + } + if (stat & MANTIS_INT_PABORT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]); + } + if (stat & MANTIS_INT_RIPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]); + } + if (stat & MANTIS_INT_PPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]); + } + if (stat & MANTIS_INT_FTRGT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]); + } + if (stat & MANTIS_INT_RISCI) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]); + mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28; + tasklet_schedule(&mantis->tasklet); + } + if (stat & MANTIS_INT_I2CDONE) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]); + wake_up(&mantis->i2c_wq); + } + mmwrite(stat, MANTIS_INT_STAT); + stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE | + MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 | + MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 | + MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 | + MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 | + MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 | + MANTIS_INT_IRQ0 | MANTIS_INT_OCERR | + MANTIS_INT_PABORT | MANTIS_INT_RIPERR | + MANTIS_INT_PPERR | MANTIS_INT_FTRGT | + MANTIS_INT_RISCI); + + if (stat) + dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask); + + dprintk(MANTIS_DEBUG, 0, "\n"); + return IRQ_HANDLED; +} + +static int __devinit hopper_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) +{ + struct mantis_pci *mantis; + struct mantis_hwconfig *config; + int err = 0; + + mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL); + if (mantis == NULL) { + printk(KERN_ERR "%s ERROR: Out of memory\n", __func__); + err = -ENOMEM; + goto fail0; + } + + mantis->num = devs; + mantis->verbose = verbose; + mantis->pdev = pdev; + config = (struct mantis_hwconfig *) pci_id->driver_data; + config->irq_handler = &hopper_irq_handler; + mantis->hwconfig = config; + + err = mantis_pci_init(mantis); + if (err) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err); + goto fail1; + } + + err = mantis_stream_control(mantis, STREAM_TO_HIF); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err); + goto fail1; + } + + err = mantis_i2c_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err); + goto fail2; + } + + err = mantis_get_mac(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err); + goto fail2; + } + + err = mantis_dma_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err); + goto fail3; + } + + err = mantis_dvb_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err); + goto fail4; + } + devs++; + + return err; + +fail4: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err); + mantis_dma_exit(mantis); + +fail3: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err); + mantis_i2c_exit(mantis); + +fail2: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err); + mantis_pci_exit(mantis); + +fail1: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err); + kfree(mantis); + +fail0: + return err; +} + +static void __devexit hopper_pci_remove(struct pci_dev *pdev) +{ + struct mantis_pci *mantis = pci_get_drvdata(pdev); + + if (mantis) { + mantis_dvb_exit(mantis); + mantis_dma_exit(mantis); + mantis_i2c_exit(mantis); + mantis_pci_exit(mantis); + kfree(mantis); + } + return; + +} + +static struct pci_device_id hopper_pci_table[] = { + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3028_DVB_T, &vp3028_config), + { } +}; + +static struct pci_driver hopper_pci_driver = { + .name = DRIVER_NAME, + .id_table = hopper_pci_table, + .probe = hopper_pci_probe, + .remove = hopper_pci_remove, +}; + +static int __devinit hopper_init(void) +{ + return pci_register_driver(&hopper_pci_driver); +} + +static void __devexit hopper_exit(void) +{ + return pci_unregister_driver(&hopper_pci_driver); +} + +module_init(hopper_init); +module_exit(hopper_exit); + +MODULE_DESCRIPTION("HOPPER driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/dvb/mantis/hopper_vp3028.c new file mode 100644 index 00000000000..96674c78e86 --- /dev/null +++ b/drivers/media/dvb/mantis/hopper_vp3028.c @@ -0,0 +1,88 @@ +/* + Hopper VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "zl10353.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "hopper_vp3028.h" + +struct zl10353_config hopper_vp3028_config = { + .demod_address = 0x0f, +}; + +#define MANTIS_MODEL_NAME "VP-3028" +#define MANTIS_DEV_TYPE "DVB-T" + +static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + struct mantis_hwconfig *config = mantis->hwconfig; + int err = 0; + + gpio_set_bits(mantis, config->reset, 0); + msleep(100); + err = mantis_frontend_power(mantis, POWER_ON); + msleep(100); + gpio_set_bits(mantis, config->reset, 1); + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + msleep(250); + dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); + fe = zl10353_attach(&hopper_vp3028_config, adapter); + + if (!fe) + return -1; + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp3028_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp3028_frontend_init, + .power = GPIF_A00, + .reset = GPIF_A03, +}; diff --git a/drivers/media/dvb/mantis/hopper_vp3028.h b/drivers/media/dvb/mantis/hopper_vp3028.h new file mode 100644 index 00000000000..57239498bc8 --- /dev/null +++ b/drivers/media/dvb/mantis/hopper_vp3028.h @@ -0,0 +1,30 @@ +/* + Hopper VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP3028_H +#define __MANTIS_VP3028_H + +#include "mantis_common.h" + +#define MANTIS_VP_3028_DVB_T 0x0028 + +extern struct mantis_hwconfig vp3028_config; + +#endif /* __MANTIS_VP3028_H */ diff --git a/drivers/media/dvb/mantis/mantis_ca.c b/drivers/media/dvb/mantis/mantis_ca.c new file mode 100644 index 00000000000..403ce043d00 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_ca.c @@ -0,0 +1,207 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_link.h" +#include "mantis_hif.h" +#include "mantis_reg.h" + +#include "mantis_ca.h" + +static int mantis_ca_read_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Read", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_read_mem(ca, addr); +} + +static int mantis_ca_write_attr_mem(struct dvb_ca_en50221 *en50221, int slot, int addr, u8 data) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request Attribute Mem Write", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_write_mem(ca, addr, data); +} + +static int mantis_ca_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Read", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_read_iom(ca, addr); +} + +static int mantis_ca_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr, u8 data) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Request CAM control Write", slot); + + if (slot != 0) + return -EINVAL; + + return mantis_hif_write_iom(ca, addr, data); +} + +static int mantis_ca_slot_reset(struct dvb_ca_en50221 *en50221, int slot) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot RESET", slot); + udelay(500); /* Wait.. */ + mmwrite(0xda, MANTIS_PCMCIA_RESET); /* Leading edge assert */ + udelay(500); + mmwrite(0x00, MANTIS_PCMCIA_RESET); /* Trailing edge deassert */ + msleep(1000); + dvb_ca_en50221_camready_irq(&ca->en50221, 0); + + return 0; +} + +static int mantis_ca_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Slot shutdown", slot); + + return 0; +} + +static int mantis_ts_control(struct dvb_ca_en50221 *en50221, int slot) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot); +/* mantis_set_direction(mantis, 1); */ /* Enable TS through CAM */ + + return 0; +} + +static int mantis_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open) +{ + struct mantis_ca *ca = en50221->data; + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Slot(%d): Poll Slot status", slot); + + if (ca->slot_state == MODULE_INSERTED) { + dprintk(MANTIS_DEBUG, 1, "CA Module present and ready"); + return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; + } else { + dprintk(MANTIS_DEBUG, 1, "CA Module not present or not ready"); + } + + return 0; +} + +int mantis_ca_init(struct mantis_pci *mantis) +{ + struct dvb_adapter *dvb_adapter = &mantis->dvb_adapter; + struct mantis_ca *ca; + int ca_flags = 0, result; + + dprintk(MANTIS_DEBUG, 1, "Initializing Mantis CA"); + ca = kzalloc(sizeof(struct mantis_ca), GFP_KERNEL); + if (!ca) { + dprintk(MANTIS_ERROR, 1, "Out of memory!, exiting .."); + result = -ENOMEM; + goto err; + } + + ca->ca_priv = mantis; + mantis->mantis_ca = ca; + ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE; + /* register CA interface */ + ca->en50221.owner = THIS_MODULE; + ca->en50221.read_attribute_mem = mantis_ca_read_attr_mem; + ca->en50221.write_attribute_mem = mantis_ca_write_attr_mem; + ca->en50221.read_cam_control = mantis_ca_read_cam_ctl; + ca->en50221.write_cam_control = mantis_ca_write_cam_ctl; + ca->en50221.slot_reset = mantis_ca_slot_reset; + ca->en50221.slot_shutdown = mantis_ca_slot_shutdown; + ca->en50221.slot_ts_enable = mantis_ts_control; + ca->en50221.poll_slot_status = mantis_slot_status; + ca->en50221.data = ca; + + mutex_init(&ca->ca_lock); + + init_waitqueue_head(&ca->hif_data_wq); + init_waitqueue_head(&ca->hif_opdone_wq); + init_waitqueue_head(&ca->hif_write_wq); + + dprintk(MANTIS_ERROR, 1, "Registering EN50221 device"); + result = dvb_ca_en50221_init(dvb_adapter, &ca->en50221, ca_flags, 1); + if (result != 0) { + dprintk(MANTIS_ERROR, 1, "EN50221: Initialization failed <%d>", result); + goto err; + } + dprintk(MANTIS_ERROR, 1, "Registered EN50221 device"); + mantis_evmgr_init(ca); + return 0; +err: + kfree(ca); + return result; +} +EXPORT_SYMBOL_GPL(mantis_ca_init); + +void mantis_ca_exit(struct mantis_pci *mantis) +{ + struct mantis_ca *ca = mantis->mantis_ca; + + dprintk(MANTIS_DEBUG, 1, "Mantis CA exit"); + + mantis_evmgr_exit(ca); + dprintk(MANTIS_ERROR, 1, "Unregistering EN50221 device"); + if (ca) + dvb_ca_en50221_release(&ca->en50221); + + kfree(ca); +} +EXPORT_SYMBOL_GPL(mantis_ca_exit); diff --git a/drivers/media/dvb/mantis/mantis_ca.h b/drivers/media/dvb/mantis/mantis_ca.h new file mode 100644 index 00000000000..dc63e55f7ec --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_ca.h @@ -0,0 +1,27 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_CA_H +#define __MANTIS_CA_H + +extern int mantis_ca_init(struct mantis_pci *mantis); +extern void mantis_ca_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_CA_H */ diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c new file mode 100644 index 00000000000..16f1708fd3b --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_cards.c @@ -0,0 +1,305 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <asm/irq.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" + +#include "mantis_vp1033.h" +#include "mantis_vp1034.h" +#include "mantis_vp1041.h" +#include "mantis_vp2033.h" +#include "mantis_vp2040.h" +#include "mantis_vp3030.h" + +#include "mantis_dma.h" +#include "mantis_ca.h" +#include "mantis_dvb.h" +#include "mantis_uart.h" +#include "mantis_ioc.h" +#include "mantis_pci.h" +#include "mantis_i2c.h" +#include "mantis_reg.h" + +static unsigned int verbose; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)"); + +static int devs; + +#define DRIVER_NAME "Mantis" + +static char *label[10] = { + "DMA", + "IRQ-0", + "IRQ-1", + "OCERR", + "PABRT", + "RIPRR", + "PPERR", + "FTRGT", + "RISCI", + "RACK" +}; + +static irqreturn_t mantis_irq_handler(int irq, void *dev_id) +{ + u32 stat = 0, mask = 0, lstat = 0, mstat = 0; + u32 rst_stat = 0, rst_mask = 0; + + struct mantis_pci *mantis; + struct mantis_ca *ca; + + mantis = (struct mantis_pci *) dev_id; + if (unlikely(mantis == NULL)) { + dprintk(MANTIS_ERROR, 1, "Mantis == NULL"); + return IRQ_NONE; + } + ca = mantis->mantis_ca; + + stat = mmread(MANTIS_INT_STAT); + mask = mmread(MANTIS_INT_MASK); + mstat = lstat = stat & ~MANTIS_INT_RISCSTAT; + if (!(stat & mask)) + return IRQ_NONE; + + rst_mask = MANTIS_GPIF_WRACK | + MANTIS_GPIF_OTHERR | + MANTIS_SBUF_WSTO | + MANTIS_GPIF_EXTIRQ; + + rst_stat = mmread(MANTIS_GPIF_STATUS); + rst_stat &= rst_mask; + mmwrite(rst_stat, MANTIS_GPIF_STATUS); + + mantis->mantis_int_stat = stat; + mantis->mantis_int_mask = mask; + dprintk(MANTIS_DEBUG, 0, "\n-- Stat=<%02x> Mask=<%02x> --", stat, mask); + if (stat & MANTIS_INT_RISCEN) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[0]); + } + if (stat & MANTIS_INT_IRQ0) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[1]); + mantis->gpif_status = rst_stat; + wake_up(&ca->hif_write_wq); + schedule_work(&ca->hif_evm_work); + } + if (stat & MANTIS_INT_IRQ1) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[2]); + schedule_work(&mantis->uart_work); + } + if (stat & MANTIS_INT_OCERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[3]); + } + if (stat & MANTIS_INT_PABORT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[4]); + } + if (stat & MANTIS_INT_RIPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[5]); + } + if (stat & MANTIS_INT_PPERR) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[6]); + } + if (stat & MANTIS_INT_FTRGT) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[7]); + } + if (stat & MANTIS_INT_RISCI) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[8]); + mantis->finished_block = (stat & MANTIS_INT_RISCSTAT) >> 28; + tasklet_schedule(&mantis->tasklet); + } + if (stat & MANTIS_INT_I2CDONE) { + dprintk(MANTIS_DEBUG, 0, "<%s>", label[9]); + wake_up(&mantis->i2c_wq); + } + mmwrite(stat, MANTIS_INT_STAT); + stat &= ~(MANTIS_INT_RISCEN | MANTIS_INT_I2CDONE | + MANTIS_INT_I2CRACK | MANTIS_INT_PCMCIA7 | + MANTIS_INT_PCMCIA6 | MANTIS_INT_PCMCIA5 | + MANTIS_INT_PCMCIA4 | MANTIS_INT_PCMCIA3 | + MANTIS_INT_PCMCIA2 | MANTIS_INT_PCMCIA1 | + MANTIS_INT_PCMCIA0 | MANTIS_INT_IRQ1 | + MANTIS_INT_IRQ0 | MANTIS_INT_OCERR | + MANTIS_INT_PABORT | MANTIS_INT_RIPERR | + MANTIS_INT_PPERR | MANTIS_INT_FTRGT | + MANTIS_INT_RISCI); + + if (stat) + dprintk(MANTIS_DEBUG, 0, "<Unknown> Stat=<%02x> Mask=<%02x>", stat, mask); + + dprintk(MANTIS_DEBUG, 0, "\n"); + return IRQ_HANDLED; +} + +static int __devinit mantis_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) +{ + struct mantis_pci *mantis; + struct mantis_hwconfig *config; + int err = 0; + + mantis = kzalloc(sizeof(struct mantis_pci), GFP_KERNEL); + if (mantis == NULL) { + printk(KERN_ERR "%s ERROR: Out of memory\n", __func__); + err = -ENOMEM; + goto fail0; + } + + mantis->num = devs; + mantis->verbose = verbose; + mantis->pdev = pdev; + config = (struct mantis_hwconfig *) pci_id->driver_data; + config->irq_handler = &mantis_irq_handler; + mantis->hwconfig = config; + + err = mantis_pci_init(mantis); + if (err) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI initialization failed <%d>", err); + goto fail1; + } + + err = mantis_stream_control(mantis, STREAM_TO_HIF); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis stream control failed <%d>", err); + goto fail1; + } + + err = mantis_i2c_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C initialization failed <%d>", err); + goto fail2; + } + + err = mantis_get_mac(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis MAC address read failed <%d>", err); + goto fail2; + } + + err = mantis_dma_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA initialization failed <%d>", err); + goto fail3; + } + + err = mantis_dvb_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DVB initialization failed <%d>", err); + goto fail4; + } + err = mantis_uart_init(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART initialization failed <%d>", err); + goto fail6; + } + + devs++; + + return err; + + + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis UART exit! <%d>", err); + mantis_uart_exit(mantis); + +fail6: +fail4: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis DMA exit! <%d>", err); + mantis_dma_exit(mantis); + +fail3: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis I2C exit! <%d>", err); + mantis_i2c_exit(mantis); + +fail2: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis PCI exit! <%d>", err); + mantis_pci_exit(mantis); + +fail1: + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis free! <%d>", err); + kfree(mantis); + +fail0: + return err; +} + +static void __devexit mantis_pci_remove(struct pci_dev *pdev) +{ + struct mantis_pci *mantis = pci_get_drvdata(pdev); + + if (mantis) { + + mantis_uart_exit(mantis); + mantis_dvb_exit(mantis); + mantis_dma_exit(mantis); + mantis_i2c_exit(mantis); + mantis_pci_exit(mantis); + kfree(mantis); + } + return; +} + +static struct pci_device_id mantis_pci_table[] = { + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1033_DVB_S, &vp1033_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1034_DVB_S, &vp1034_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_1041_DVB_S2, &vp1041_config), + MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_10, &vp1041_config), + MAKE_ENTRY(TECHNISAT, SKYSTAR_HD2_20, &vp1041_config), + MAKE_ENTRY(TERRATEC, CINERGY_S2_PCI_HD, &vp1041_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2033_DVB_C, &vp2033_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_2040_DVB_C, &vp2040_config), + MAKE_ENTRY(TECHNISAT, CABLESTAR_HD2, &vp2040_config), + MAKE_ENTRY(TERRATEC, CINERGY_C, &vp2033_config), + MAKE_ENTRY(TWINHAN_TECHNOLOGIES, MANTIS_VP_3030_DVB_T, &vp3030_config), + { } +}; + +static struct pci_driver mantis_pci_driver = { + .name = DRIVER_NAME, + .id_table = mantis_pci_table, + .probe = mantis_pci_probe, + .remove = mantis_pci_remove, +}; + +static int __devinit mantis_init(void) +{ + return pci_register_driver(&mantis_pci_driver); +} + +static void __devexit mantis_exit(void) +{ + return pci_unregister_driver(&mantis_pci_driver); +} + +module_init(mantis_init); +module_exit(mantis_exit); + +MODULE_DESCRIPTION("MANTIS driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h new file mode 100644 index 00000000000..d0b645a483c --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_common.h @@ -0,0 +1,179 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_COMMON_H +#define __MANTIS_COMMON_H + +#include <linux/mutex.h> +#include <linux/workqueue.h> + +#include "mantis_uart.h" + +#include "mantis_link.h" + +#define MANTIS_ERROR 0 +#define MANTIS_NOTICE 1 +#define MANTIS_INFO 2 +#define MANTIS_DEBUG 3 +#define MANTIS_TMG 9 + +#define dprintk(y, z, format, arg...) do { \ + if (z) { \ + if ((mantis->verbose > MANTIS_ERROR) && (mantis->verbose > y)) \ + printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((mantis->verbose > MANTIS_NOTICE) && (mantis->verbose > y)) \ + printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((mantis->verbose > MANTIS_INFO) && (mantis->verbose > y)) \ + printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((mantis->verbose > MANTIS_DEBUG) && (mantis->verbose > y)) \ + printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + else if ((mantis->verbose > MANTIS_TMG) && (mantis->verbose > y)) \ + printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \ + } else { \ + if (mantis->verbose > y) \ + printk(format , ##arg); \ + } \ +} while(0) + +#define mwrite(dat, addr) writel((dat), addr) +#define mread(addr) readl(addr) + +#define mmwrite(dat, addr) mwrite((dat), (mantis->mmio + (addr))) +#define mmread(addr) mread(mantis->mmio + (addr)) + +#define MANTIS_TS_188 0 +#define MANTIS_TS_204 1 + +#define TWINHAN_TECHNOLOGIES 0x1822 +#define MANTIS 0x4e35 + +#define TECHNISAT 0x1ae4 +#define TERRATEC 0x153b + +#define MAKE_ENTRY(__subven, __subdev, __configptr) { \ + .vendor = TWINHAN_TECHNOLOGIES, \ + .device = MANTIS, \ + .subvendor = (__subven), \ + .subdevice = (__subdev), \ + .driver_data = (unsigned long) (__configptr) \ +} + +enum mantis_i2c_mode { + MANTIS_PAGE_MODE = 0, + MANTIS_BYTE_MODE, +}; + +struct mantis_pci; + +struct mantis_hwconfig { + char *model_name; + char *dev_type; + u32 ts_size; + + enum mantis_baud baud_rate; + enum mantis_parity parity; + u32 bytes; + + irqreturn_t (*irq_handler)(int irq, void *dev_id); + int (*frontend_init)(struct mantis_pci *mantis, struct dvb_frontend *fe); + + u8 power; + u8 reset; + + enum mantis_i2c_mode i2c_mode; +}; + +struct mantis_pci { + unsigned int verbose; + + /* PCI stuff */ + u16 vendor_id; + u16 device_id; + u16 subsystem_vendor; + u16 subsystem_device; + + u8 latency; + + struct pci_dev *pdev; + + unsigned long mantis_addr; + void __iomem *mmio; + + u8 irq; + u8 revision; + + unsigned int num; + + /* RISC Core */ + u32 finished_block; + u32 last_block; + u32 line_bytes; + u32 line_count; + u32 risc_pos; + u8 *buf_cpu; + dma_addr_t buf_dma; + u32 *risc_cpu; + dma_addr_t risc_dma; + + struct tasklet_struct tasklet; + + struct i2c_adapter adapter; + int i2c_rc; + wait_queue_head_t i2c_wq; + struct mutex i2c_lock; + + /* DVB stuff */ + struct dvb_adapter dvb_adapter; + struct dvb_frontend *fe; + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dmx_frontend fe_hw; + struct dmx_frontend fe_mem; + struct dvb_net dvbnet; + + u8 feeds; + + struct mantis_hwconfig *hwconfig; + + u32 mantis_int_stat; + u32 mantis_int_mask; + + /* board specific */ + u8 mac_address[8]; + u32 sub_vendor_id; + u32 sub_device_id; + + /* A12 A13 A14 */ + u32 gpio_status; + + u32 gpif_status; + + struct mantis_ca *mantis_ca; + + wait_queue_head_t uart_wq; + struct work_struct uart_work; + spinlock_t uart_lock; + + struct input_dev *rc; +}; + +#define MANTIS_HIF_STATUS (mantis->gpio_status) + +#endif /* __MANTIS_COMMON_H */ diff --git a/drivers/media/dvb/mantis/mantis_core.c b/drivers/media/dvb/mantis/mantis_core.c new file mode 100644 index 00000000000..8113b23ce44 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_core.c @@ -0,0 +1,238 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_core.h" +#include "mantis_vp1033.h" +#include "mantis_vp1034.h" +#include "mantis_vp1041.h" +#include "mantis_vp2033.h" +#include "mantis_vp2040.h" +#include "mantis_vp3030.h" + +static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) +{ + int err; + struct i2c_msg msg[] = { + { + .addr = 0x50, + .flags = 0, + .buf = data, + .len = 1 + }, { + .addr = 0x50, + .flags = I2C_M_RD, + .buf = data, + .len = length + }, + }; + + err = i2c_transfer(&mantis->adapter, msg, 2); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, + "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >", + err, data[0], data[1]); + + return err; + } + + return 0; +} + +static int write_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length) +{ + int err; + + struct i2c_msg msg = { + .addr = 0x50, + .flags = 0, + .buf = data, + .len = length + }; + + err = i2c_transfer(&mantis->adapter, &msg, 1); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, + "ERROR: i2c write: < err=%i length=0x%02x d0=0x%02x, d1=0x%02x >", + err, length, data[0], data[1]); + + return err; + } + + return 0; +} + +static int get_mac_address(struct mantis_pci *mantis) +{ + int err; + + mantis->mac_address[0] = 0x08; + err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error"); + + return err; + } + dprintk(verbose, MANTIS_ERROR, 0, + " MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n", + mantis->mac_address[0], mantis->mac_address[1], + mantis->mac_address[2], mantis->mac_address[3], + mantis->mac_address[4], mantis->mac_address[5]); + + return 0; +} + +#define MANTIS_MODEL_UNKNOWN "UNKNOWN" +#define MANTIS_DEV_UNKNOWN "UNKNOWN" + +struct mantis_hwconfig unknown_device = { + .model_name = MANTIS_MODEL_UNKNOWN, + .dev_type = MANTIS_DEV_UNKNOWN, +}; + +static void mantis_load_config(struct mantis_pci *mantis) +{ + switch (mantis->subsystem_device) { + case MANTIS_VP_1033_DVB_S: /* VP-1033 */ + mantis->hwconfig = &vp1033_mantis_config; + break; + case MANTIS_VP_1034_DVB_S: /* VP-1034 */ + mantis->hwconfig = &vp1034_mantis_config; + break; + case MANTIS_VP_1041_DVB_S2: /* VP-1041 */ + case TECHNISAT_SKYSTAR_HD2: + mantis->hwconfig = &vp1041_mantis_config; + break; + case MANTIS_VP_2033_DVB_C: /* VP-2033 */ + mantis->hwconfig = &vp2033_mantis_config; + break; + case MANTIS_VP_2040_DVB_C: /* VP-2040 */ + case TERRATEC_CINERGY_C_PCI: /* VP-2040 clone */ + case TECHNISAT_CABLESTAR_HD2: + mantis->hwconfig = &vp2040_mantis_config; + break; + case MANTIS_VP_3030_DVB_T: /* VP-3030 */ + mantis->hwconfig = &vp3030_mantis_config; + break; + default: + mantis->hwconfig = &unknown_device; + break; + } +} + +int mantis_core_init(struct mantis_pci *mantis) +{ + int err = 0; + + mantis_load_config(mantis); + dprintk(verbose, MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n", + mantis->hwconfig->model_name, mantis->hwconfig->dev_type, + mantis->pdev->bus->number, PCI_SLOT(mantis->pdev->devfn), PCI_FUNC(mantis->pdev->devfn)); + dprintk(verbose, MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ", + mantis->revision, + mantis->subsystem_vendor, mantis->subsystem_device); + dprintk(verbose, MANTIS_ERROR, 0, + "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n", + mantis->pdev->irq, mantis->latency, + mantis->mantis_addr, mantis->mantis_mmio); + + err = mantis_i2c_init(mantis); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis I2C init failed"); + return err; + } + err = get_mac_address(mantis); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "get MAC address failed"); + return err; + } + err = mantis_dma_init(mantis); + if (err < 0) { + dprintk(verbose, MANTIS_ERROR, 1, "Mantis DMA init failed"); + return err; + } + err = mantis_dvb_init(mantis); + if (err < 0) { + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB init failed"); + return err; + } + err = mantis_uart_init(mantis); + if (err < 0) { + dprintk(verbose, MANTIS_DEBUG, 1, "Mantis UART init failed"); + return err; + } + + return 0; +} + +int mantis_core_exit(struct mantis_pci *mantis) +{ + mantis_dma_stop(mantis); + dprintk(verbose, MANTIS_ERROR, 1, "DMA engine stopping"); + + mantis_uart_exit(mantis); + dprintk(verbose, MANTIS_ERROR, 1, "UART exit failed"); + + if (mantis_dma_exit(mantis) < 0) + dprintk(verbose, MANTIS_ERROR, 1, "DMA exit failed"); + if (mantis_dvb_exit(mantis) < 0) + dprintk(verbose, MANTIS_ERROR, 1, "DVB exit failed"); + if (mantis_i2c_exit(mantis) < 0) + dprintk(verbose, MANTIS_ERROR, 1, "I2C adapter delete.. failed"); + + return 0; +} + +/* Turn the given bit on or off. */ +void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value) +{ + u32 cur; + + cur = mmread(MANTIS_GPIF_ADDR); + if (value) + mantis->gpio_status = cur | (1 << bitpos); + else + mantis->gpio_status = cur & (~(1 << bitpos)); + + mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR); + mmwrite(0x00, MANTIS_GPIF_DOUT); + udelay(100); +} + +/* direction = 0 , no CI passthrough ; 1 , CI passthrough */ +void mantis_set_direction(struct mantis_pci *mantis, int direction) +{ + u32 reg; + + reg = mmread(0x28); + dprintk(verbose, MANTIS_DEBUG, 1, "TS direction setup"); + if (direction == 0x01) { + /* to CI */ + reg |= 0x04; + mmwrite(reg, 0x28); + reg &= 0xff - 0x04; + mmwrite(reg, 0x28); + } else { + reg &= 0xff - 0x04; + mmwrite(reg, 0x28); + reg |= 0x04; + mmwrite(reg, 0x28); + } +} diff --git a/drivers/media/dvb/mantis/mantis_core.h b/drivers/media/dvb/mantis/mantis_core.h new file mode 100644 index 00000000000..833ee42e694 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_core.h @@ -0,0 +1,57 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_CORE_H +#define __MANTIS_CORE_H + +#include "mantis_common.h" + + +#define FE_TYPE_SAT 0 +#define FE_TYPE_CAB 1 +#define FE_TYPE_TER 2 + +#define FE_TYPE_TS204 0 +#define FE_TYPE_TS188 1 + + +struct vendorname { + u8 *sub_vendor_name; + u32 sub_vendor_id; +}; + +struct devicetype { + u8 *sub_device_name; + u32 sub_device_id; + u8 device_type; + u32 type_flags; +}; + + +extern int mantis_dma_init(struct mantis_pci *mantis); +extern int mantis_dma_exit(struct mantis_pci *mantis); +extern void mantis_dma_start(struct mantis_pci *mantis); +extern void mantis_dma_stop(struct mantis_pci *mantis); +extern int mantis_i2c_init(struct mantis_pci *mantis); +extern int mantis_i2c_exit(struct mantis_pci *mantis); +extern int mantis_core_init(struct mantis_pci *mantis); +extern int mantis_core_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_CORE_H */ diff --git a/drivers/media/dvb/mantis/mantis_dma.c b/drivers/media/dvb/mantis/mantis_dma.c new file mode 100644 index 00000000000..46202a4012a --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_dma.c @@ -0,0 +1,256 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> +#include <asm/page.h> +#include <linux/vmalloc.h> +#include <linux/pci.h> + +#include <asm/irq.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_dma.h" + +#define RISC_WRITE (0x01 << 28) +#define RISC_JUMP (0x07 << 28) +#define RISC_IRQ (0x01 << 24) + +#define RISC_STATUS(status) ((((~status) & 0x0f) << 20) | ((status & 0x0f) << 16)) +#define RISC_FLUSH() (mantis->risc_pos = 0) +#define RISC_INSTR(opcode) (mantis->risc_cpu[mantis->risc_pos++] = cpu_to_le32(opcode)) + +#define MANTIS_BUF_SIZE (64 * 1024) +#define MANTIS_BLOCK_BYTES (MANTIS_BUF_SIZE >> 4) +#define MANTIS_BLOCK_COUNT (1 << 4) +#define MANTIS_RISC_SIZE PAGE_SIZE + +int mantis_dma_exit(struct mantis_pci *mantis) +{ + if (mantis->buf_cpu) { + dprintk(MANTIS_ERROR, 1, + "DMA=0x%lx cpu=0x%p size=%d", + (unsigned long) mantis->buf_dma, + mantis->buf_cpu, + MANTIS_BUF_SIZE); + + pci_free_consistent(mantis->pdev, MANTIS_BUF_SIZE, + mantis->buf_cpu, mantis->buf_dma); + + mantis->buf_cpu = NULL; + } + if (mantis->risc_cpu) { + dprintk(MANTIS_ERROR, 1, + "RISC=0x%lx cpu=0x%p size=%lx", + (unsigned long) mantis->risc_dma, + mantis->risc_cpu, + MANTIS_RISC_SIZE); + + pci_free_consistent(mantis->pdev, MANTIS_RISC_SIZE, + mantis->risc_cpu, mantis->risc_dma); + + mantis->risc_cpu = NULL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_dma_exit); + +static inline int mantis_alloc_buffers(struct mantis_pci *mantis) +{ + if (!mantis->buf_cpu) { + mantis->buf_cpu = pci_alloc_consistent(mantis->pdev, + MANTIS_BUF_SIZE, + &mantis->buf_dma); + if (!mantis->buf_cpu) { + dprintk(MANTIS_ERROR, 1, + "DMA buffer allocation failed"); + + goto err; + } + dprintk(MANTIS_ERROR, 1, + "DMA=0x%lx cpu=0x%p size=%d", + (unsigned long) mantis->buf_dma, + mantis->buf_cpu, MANTIS_BUF_SIZE); + } + if (!mantis->risc_cpu) { + mantis->risc_cpu = pci_alloc_consistent(mantis->pdev, + MANTIS_RISC_SIZE, + &mantis->risc_dma); + + if (!mantis->risc_cpu) { + dprintk(MANTIS_ERROR, 1, + "RISC program allocation failed"); + + mantis_dma_exit(mantis); + + goto err; + } + dprintk(MANTIS_ERROR, 1, + "RISC=0x%lx cpu=0x%p size=%lx", + (unsigned long) mantis->risc_dma, + mantis->risc_cpu, MANTIS_RISC_SIZE); + } + + return 0; +err: + dprintk(MANTIS_ERROR, 1, "Out of memory (?) ....."); + return -ENOMEM; +} + +static inline int mantis_calc_lines(struct mantis_pci *mantis) +{ + mantis->line_bytes = MANTIS_BLOCK_BYTES; + mantis->line_count = MANTIS_BLOCK_COUNT; + + while (mantis->line_bytes > 4095) { + mantis->line_bytes >>= 1; + mantis->line_count <<= 1; + } + + dprintk(MANTIS_DEBUG, 1, "Mantis RISC block bytes=[%d], line bytes=[%d], line count=[%d]", + MANTIS_BLOCK_BYTES, mantis->line_bytes, mantis->line_count); + + if (mantis->line_count > 255) { + dprintk(MANTIS_ERROR, 1, "Buffer size error"); + return -EINVAL; + } + + return 0; +} + +int mantis_dma_init(struct mantis_pci *mantis) +{ + int err = 0; + + dprintk(MANTIS_DEBUG, 1, "Mantis DMA init"); + if (mantis_alloc_buffers(mantis) < 0) { + dprintk(MANTIS_ERROR, 1, "Error allocating DMA buffer"); + + /* Stop RISC Engine */ + mmwrite(0, MANTIS_DMA_CTL); + + goto err; + } + err = mantis_calc_lines(mantis); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "Mantis calc lines failed"); + + goto err; + } + + return 0; +err: + return err; +} +EXPORT_SYMBOL_GPL(mantis_dma_init); + +static inline void mantis_risc_program(struct mantis_pci *mantis) +{ + u32 buf_pos = 0; + u32 line; + + dprintk(MANTIS_DEBUG, 1, "Mantis create RISC program"); + RISC_FLUSH(); + + dprintk(MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u", + mantis->line_count, mantis->line_bytes); + + for (line = 0; line < mantis->line_count; line++) { + dprintk(MANTIS_DEBUG, 1, "RISC PROG line=[%d]", line); + if (!(buf_pos % MANTIS_BLOCK_BYTES)) { + RISC_INSTR(RISC_WRITE | + RISC_IRQ | + RISC_STATUS(((buf_pos / MANTIS_BLOCK_BYTES) + + (MANTIS_BLOCK_COUNT - 1)) % + MANTIS_BLOCK_COUNT) | + mantis->line_bytes); + } else { + RISC_INSTR(RISC_WRITE | mantis->line_bytes); + } + RISC_INSTR(mantis->buf_dma + buf_pos); + buf_pos += mantis->line_bytes; + } + RISC_INSTR(RISC_JUMP); + RISC_INSTR(mantis->risc_dma); +} + +void mantis_dma_start(struct mantis_pci *mantis) +{ + dprintk(MANTIS_DEBUG, 1, "Mantis Start DMA engine"); + + mantis_risc_program(mantis); + mmwrite(mantis->risc_dma, MANTIS_RISC_START); + mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR); + + mmwrite(0, MANTIS_DMA_CTL); + mantis->last_block = mantis->finished_block = 0; + + mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_RISCI, MANTIS_INT_MASK); + + mmwrite(MANTIS_FIFO_EN | MANTIS_DCAP_EN + | MANTIS_RISC_EN, MANTIS_DMA_CTL); + +} + +void mantis_dma_stop(struct mantis_pci *mantis) +{ + u32 stat = 0, mask = 0; + + stat = mmread(MANTIS_INT_STAT); + mask = mmread(MANTIS_INT_MASK); + dprintk(MANTIS_DEBUG, 1, "Mantis Stop DMA engine"); + + mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_HIFRDWRN))), MANTIS_GPIF_ADDR); + + mmwrite((mmread(MANTIS_DMA_CTL) & ~(MANTIS_FIFO_EN | + MANTIS_DCAP_EN | + MANTIS_RISC_EN)), MANTIS_DMA_CTL); + + mmwrite(mmread(MANTIS_INT_STAT), MANTIS_INT_STAT); + + mmwrite(mmread(MANTIS_INT_MASK) & ~(MANTIS_INT_RISCI | + MANTIS_INT_RISCEN), MANTIS_INT_MASK); +} + + +void mantis_dma_xfer(unsigned long data) +{ + struct mantis_pci *mantis = (struct mantis_pci *) data; + struct mantis_hwconfig *config = mantis->hwconfig; + + while (mantis->last_block != mantis->finished_block) { + dprintk(MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]", + mantis->last_block, mantis->finished_block); + + (config->ts_size ? dvb_dmx_swfilter_204 : dvb_dmx_swfilter) + (&mantis->demux, &mantis->buf_cpu[mantis->last_block * MANTIS_BLOCK_BYTES], MANTIS_BLOCK_BYTES); + mantis->last_block = (mantis->last_block + 1) % MANTIS_BLOCK_COUNT; + } +} diff --git a/drivers/media/dvb/mantis/mantis_dma.h b/drivers/media/dvb/mantis/mantis_dma.h new file mode 100644 index 00000000000..6be00fa8209 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_dma.h @@ -0,0 +1,30 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_DMA_H +#define __MANTIS_DMA_H + +extern int mantis_dma_init(struct mantis_pci *mantis); +extern int mantis_dma_exit(struct mantis_pci *mantis); +extern void mantis_dma_start(struct mantis_pci *mantis); +extern void mantis_dma_stop(struct mantis_pci *mantis); +extern void mantis_dma_xfer(unsigned long data); + +#endif /* __MANTIS_DMA_H */ diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c new file mode 100644 index 00000000000..99d82eec3b0 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_dvb.c @@ -0,0 +1,296 @@ +/* + Mantis PCI bridge driver + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> +#include <linux/bitops.h> + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/i2c.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_dma.h" +#include "mantis_ca.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + + switch (power) { + case POWER_ON: + dprintk(MANTIS_DEBUG, 1, "Power ON"); + gpio_set_bits(mantis, config->power, POWER_ON); + msleep(100); + gpio_set_bits(mantis, config->power, POWER_ON); + msleep(100); + break; + + case POWER_OFF: + dprintk(MANTIS_DEBUG, 1, "Power OFF"); + gpio_set_bits(mantis, config->power, POWER_OFF); + msleep(100); + break; + + default: + dprintk(MANTIS_DEBUG, 1, "Unknown state <%02x>", power); + return -1; + } + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_frontend_power); + +void mantis_frontend_soft_reset(struct mantis_pci *mantis) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + + dprintk(MANTIS_DEBUG, 1, "Frontend RESET"); + gpio_set_bits(mantis, config->reset, 0); + msleep(100); + gpio_set_bits(mantis, config->reset, 0); + msleep(100); + gpio_set_bits(mantis, config->reset, 1); + msleep(100); + gpio_set_bits(mantis, config->reset, 1); + msleep(100); + + return; +} +EXPORT_SYMBOL_GPL(mantis_frontend_soft_reset); + +static int mantis_frontend_shutdown(struct mantis_pci *mantis) +{ + int err; + + mantis_frontend_soft_reset(mantis); + err = mantis_frontend_power(mantis, POWER_OFF); + if (err != 0) { + dprintk(MANTIS_ERROR, 1, "Frontend POWER OFF failed! <%d>", err); + return 1; + } + + return 0; +} + +static int mantis_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct mantis_pci *mantis = dvbdmx->priv; + + dprintk(MANTIS_DEBUG, 1, "Mantis DVB Start feed"); + if (!dvbdmx->dmx.frontend) { + dprintk(MANTIS_DEBUG, 1, "no frontend ?"); + return -EINVAL; + } + + mantis->feeds++; + dprintk(MANTIS_DEBUG, 1, "mantis start feed, feeds=%d", mantis->feeds); + + if (mantis->feeds == 1) { + dprintk(MANTIS_DEBUG, 1, "mantis start feed & dma"); + mantis_dma_start(mantis); + } + + return mantis->feeds; +} + +static int mantis_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct dvb_demux *dvbdmx = dvbdmxfeed->demux; + struct mantis_pci *mantis = dvbdmx->priv; + + dprintk(MANTIS_DEBUG, 1, "Mantis DVB Stop feed"); + if (!dvbdmx->dmx.frontend) { + dprintk(MANTIS_DEBUG, 1, "no frontend ?"); + return -EINVAL; + } + + mantis->feeds--; + if (mantis->feeds == 0) { + dprintk(MANTIS_DEBUG, 1, "mantis stop feed and dma"); + mantis_dma_stop(mantis); + } + + return 0; +} + +int __devinit mantis_dvb_init(struct mantis_pci *mantis) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + int result = -1; + + dprintk(MANTIS_DEBUG, 1, "dvb_register_adapter"); + + result = dvb_register_adapter(&mantis->dvb_adapter, + "Mantis DVB adapter", + THIS_MODULE, + &mantis->pdev->dev, + adapter_nr); + + if (result < 0) { + + dprintk(MANTIS_ERROR, 1, "Error registering adapter"); + return -ENODEV; + } + + mantis->dvb_adapter.priv = mantis; + mantis->demux.dmx.capabilities = DMX_TS_FILTERING | + DMX_SECTION_FILTERING | + DMX_MEMORY_BASED_FILTERING; + + mantis->demux.priv = mantis; + mantis->demux.filternum = 256; + mantis->demux.feednum = 256; + mantis->demux.start_feed = mantis_dvb_start_feed; + mantis->demux.stop_feed = mantis_dvb_stop_feed; + mantis->demux.write_to_decoder = NULL; + + dprintk(MANTIS_DEBUG, 1, "dvb_dmx_init"); + result = dvb_dmx_init(&mantis->demux); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); + + goto err0; + } + + mantis->dmxdev.filternum = 256; + mantis->dmxdev.demux = &mantis->demux.dmx; + mantis->dmxdev.capabilities = 0; + dprintk(MANTIS_DEBUG, 1, "dvb_dmxdev_init"); + + result = dvb_dmxdev_init(&mantis->dmxdev, &mantis->dvb_adapter); + if (result < 0) { + + dprintk(MANTIS_ERROR, 1, "dvb_dmxdev_init failed, ERROR=%d", result); + goto err1; + } + + mantis->fe_hw.source = DMX_FRONTEND_0; + result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_hw); + if (result < 0) { + + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); + goto err2; + } + + mantis->fe_mem.source = DMX_MEMORY_FE; + result = mantis->demux.dmx.add_frontend(&mantis->demux.dmx, &mantis->fe_mem); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); + goto err3; + } + + result = mantis->demux.dmx.connect_frontend(&mantis->demux.dmx, &mantis->fe_hw); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "dvb_dmx_init failed, ERROR=%d", result); + goto err4; + } + + dvb_net_init(&mantis->dvb_adapter, &mantis->dvbnet, &mantis->demux.dmx); + tasklet_init(&mantis->tasklet, mantis_dma_xfer, (unsigned long) mantis); + if (mantis->hwconfig) { + result = config->frontend_init(mantis, mantis->fe); + if (result < 0) { + dprintk(MANTIS_ERROR, 1, "!!! NO Frontends found !!!"); + goto err5; + } else { + if (mantis->fe == NULL) { + dprintk(MANTIS_ERROR, 1, "FE <NULL>"); + goto err5; + } + + if (dvb_register_frontend(&mantis->dvb_adapter, mantis->fe)) { + dprintk(MANTIS_ERROR, 1, "ERROR: Frontend registration failed"); + + if (mantis->fe->ops.release) + mantis->fe->ops.release(mantis->fe); + + mantis->fe = NULL; + goto err5; + } + } + } + + return 0; + + /* Error conditions .. */ +err5: + tasklet_kill(&mantis->tasklet); + dvb_net_release(&mantis->dvbnet); + dvb_unregister_frontend(mantis->fe); + dvb_frontend_detach(mantis->fe); +err4: + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem); + +err3: + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw); + +err2: + dvb_dmxdev_release(&mantis->dmxdev); + +err1: + dvb_dmx_release(&mantis->demux); + +err0: + dvb_unregister_adapter(&mantis->dvb_adapter); + + return result; +} +EXPORT_SYMBOL_GPL(mantis_dvb_init); + +int __devexit mantis_dvb_exit(struct mantis_pci *mantis) +{ + int err; + + if (mantis->fe) { + /* mantis_ca_exit(mantis); */ + err = mantis_frontend_shutdown(mantis); + if (err != 0) + dprintk(MANTIS_ERROR, 1, "Frontend exit while POWER ON! <%d>", err); + dvb_unregister_frontend(mantis->fe); + dvb_frontend_detach(mantis->fe); + } + + tasklet_kill(&mantis->tasklet); + dvb_net_release(&mantis->dvbnet); + + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_mem); + mantis->demux.dmx.remove_frontend(&mantis->demux.dmx, &mantis->fe_hw); + + dvb_dmxdev_release(&mantis->dmxdev); + dvb_dmx_release(&mantis->demux); + + dprintk(MANTIS_DEBUG, 1, "dvb_unregister_adapter"); + dvb_unregister_adapter(&mantis->dvb_adapter); + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_dvb_exit); diff --git a/drivers/media/dvb/mantis/mantis_dvb.h b/drivers/media/dvb/mantis/mantis_dvb.h new file mode 100644 index 00000000000..464199db304 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_dvb.h @@ -0,0 +1,35 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_DVB_H +#define __MANTIS_DVB_H + +enum mantis_power { + POWER_OFF = 0, + POWER_ON = 1 +}; + +extern int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power); +extern void mantis_frontend_soft_reset(struct mantis_pci *mantis); + +extern int mantis_dvb_init(struct mantis_pci *mantis); +extern int mantis_dvb_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_DVB_H */ diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c new file mode 100644 index 00000000000..a7b369a439d --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_evm.c @@ -0,0 +1,117 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_link.h" +#include "mantis_hif.h" +#include "mantis_reg.h" + +static void mantis_hifevm_work(struct work_struct *work) +{ + struct mantis_ca *ca = container_of(work, struct mantis_ca, hif_evm_work); + struct mantis_pci *mantis = ca->ca_priv; + + u32 gpif_stat, gpif_mask; + + gpif_stat = mmread(MANTIS_GPIF_STATUS); + gpif_mask = mmread(MANTIS_GPIF_IRQCFG); + + if (gpif_stat & MANTIS_GPIF_DETSTAT) { + if (gpif_stat & MANTIS_CARD_PLUGIN) { + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Plugin", mantis->num); + mmwrite(0xdada0000, MANTIS_CARD_RESET); + mantis_event_cam_plugin(ca); + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_INSERTED); + } + } else { + if (gpif_stat & MANTIS_CARD_PLUGOUT) { + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): CAM Unplug", mantis->num); + mmwrite(0xdada0000, MANTIS_CARD_RESET); + mantis_event_cam_unplug(ca); + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_REMOVED); + } + } + + if (mantis->gpif_status & MANTIS_GPIF_EXTIRQ) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Ext IRQ", mantis->num); + + if (mantis->gpif_status & MANTIS_SBUF_WSTO) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Timeout", mantis->num); + + if (mantis->gpif_status & MANTIS_GPIF_OTHERR) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Alignment Error", mantis->num); + + if (gpif_stat & MANTIS_SBUF_OVFLW) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Overflow", mantis->num); + + if (gpif_stat & MANTIS_GPIF_BRRDY) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Read Ready", mantis->num); + + if (gpif_stat & MANTIS_GPIF_INTSTAT) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): GPIF IRQ", mantis->num); + + if (gpif_stat & MANTIS_SBUF_EMPTY) + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer Empty", mantis->num); + + if (gpif_stat & MANTIS_SBUF_OPDONE) { + dprintk(MANTIS_DEBUG, 1, "Event Mgr: Adapter(%d) Slot(0): Smart Buffer operation complete", mantis->num); + ca->sbuf_status = MANTIS_SBUF_DATA_AVAIL; + ca->hif_event = MANTIS_SBUF_OPDONE; + wake_up(&ca->hif_opdone_wq); + } +} + +int mantis_evmgr_init(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Initializing Mantis Host I/F Event manager"); + INIT_WORK(&ca->hif_evm_work, mantis_hifevm_work); + mantis_pcmcia_init(ca); + schedule_work(&ca->hif_evm_work); + mantis_hif_init(ca); + return 0; +} + +void mantis_evmgr_exit(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + dprintk(MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting"); + flush_scheduled_work(); + mantis_hif_exit(ca); + mantis_pcmcia_exit(ca); +} diff --git a/drivers/media/dvb/mantis/mantis_hif.c b/drivers/media/dvb/mantis/mantis_hif.c new file mode 100644 index 00000000000..7477dac628b --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_hif.c @@ -0,0 +1,240 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/sched.h> + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" + +#include "mantis_hif.h" +#include "mantis_link.h" /* temporary due to physical layer stuff */ + +#include "mantis_reg.h" + + +static int mantis_hif_sbuf_opdone_wait(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + int rc = 0; + + if (wait_event_timeout(ca->hif_opdone_wq, + ca->hif_event & MANTIS_SBUF_OPDONE, + msecs_to_jiffies(500)) == -ERESTARTSYS) { + + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Smart buffer operation timeout !", mantis->num); + rc = -EREMOTEIO; + } + dprintk(MANTIS_DEBUG, 1, "Smart Buffer Operation complete"); + ca->hif_event &= ~MANTIS_SBUF_OPDONE; + return rc; +} + +static int mantis_hif_write_wait(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 opdone = 0, timeout = 0; + int rc = 0; + + if (wait_event_timeout(ca->hif_write_wq, + mantis->gpif_status & MANTIS_GPIF_WRACK, + msecs_to_jiffies(500)) == -ERESTARTSYS) { + + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): Write ACK timed out !", mantis->num); + rc = -EREMOTEIO; + } + dprintk(MANTIS_DEBUG, 1, "Write Acknowledged"); + mantis->gpif_status &= ~MANTIS_GPIF_WRACK; + while (!opdone) { + opdone = (mmread(MANTIS_GPIF_STATUS) & MANTIS_SBUF_OPDONE); + udelay(500); + timeout++; + if (timeout > 100) { + dprintk(MANTIS_ERROR, 1, "Adater(%d) Slot(0): Write operation timed out!", mantis->num); + rc = -ETIMEDOUT; + break; + } + } + dprintk(MANTIS_DEBUG, 1, "HIF Write success"); + return rc; +} + + +int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 hif_addr = 0, data, count = 4; + + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Read", mantis->num); + mutex_lock(&ca->ca_lock); + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; + hif_addr |= MANTIS_HIF_STATUS; + hif_addr |= addr; + + mmwrite(hif_addr, MANTIS_GPIF_BRADDR); + mmwrite(count, MANTIS_GPIF_BRBYTES); + udelay(20); + mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR); + + if (mantis_hif_sbuf_opdone_wait(ca) != 0) { + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): GPIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); + return -EREMOTEIO; + } + data = mmread(MANTIS_GPIF_DIN); + mutex_unlock(&ca->ca_lock); + dprintk(MANTIS_DEBUG, 1, "Mem Read: 0x%02x", data); + return (data >> 24) & 0xff; +} + +int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data) +{ + struct mantis_slot *slot = ca->slot; + struct mantis_pci *mantis = ca->ca_priv; + u32 hif_addr = 0; + + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF Mem Write", mantis->num); + mutex_lock(&ca->ca_lock); + hif_addr &= ~MANTIS_GPIF_HIFRDWRN; + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr &= ~MANTIS_GPIF_PCMCIAIOM; + hif_addr |= MANTIS_HIF_STATUS; + hif_addr |= addr; + + mmwrite(slot->slave_cfg, MANTIS_GPIF_CFGSLA); /* Slot0 alone for now */ + mmwrite(hif_addr, MANTIS_GPIF_ADDR); + mmwrite(data, MANTIS_GPIF_DOUT); + + if (mantis_hif_write_wait(ca) != 0) { + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); + return -EREMOTEIO; + } + dprintk(MANTIS_DEBUG, 1, "Mem Write: (0x%02x to 0x%02x)", data, addr); + mutex_unlock(&ca->ca_lock); + + return 0; +} + +int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 data, hif_addr = 0; + + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Read", mantis->num); + mutex_lock(&ca->ca_lock); + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr |= MANTIS_GPIF_PCMCIAIOM; + hif_addr |= MANTIS_HIF_STATUS; + hif_addr |= addr; + + mmwrite(hif_addr, MANTIS_GPIF_BRADDR); + mmwrite(1, MANTIS_GPIF_BRBYTES); + udelay(20); + mmwrite(hif_addr | MANTIS_GPIF_HIFRDWRN, MANTIS_GPIF_ADDR); + + if (mantis_hif_sbuf_opdone_wait(ca) != 0) { + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); + return -EREMOTEIO; + } + data = mmread(MANTIS_GPIF_DIN); + dprintk(MANTIS_DEBUG, 1, "I/O Read: 0x%02x", data); + udelay(50); + mutex_unlock(&ca->ca_lock); + + return (u8) data; +} + +int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 hif_addr = 0; + + dprintk(MANTIS_DEBUG, 1, "Adapter(%d) Slot(0): Request HIF I/O Write", mantis->num); + mutex_lock(&ca->ca_lock); + hif_addr &= ~MANTIS_GPIF_PCMCIAREG; + hif_addr &= ~MANTIS_GPIF_HIFRDWRN; + hif_addr |= MANTIS_GPIF_PCMCIAIOM; + hif_addr |= MANTIS_HIF_STATUS; + hif_addr |= addr; + + mmwrite(hif_addr, MANTIS_GPIF_ADDR); + mmwrite(data, MANTIS_GPIF_DOUT); + + if (mantis_hif_write_wait(ca) != 0) { + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Slot(0): HIF Smart Buffer operation failed", mantis->num); + mutex_unlock(&ca->ca_lock); + return -EREMOTEIO; + } + dprintk(MANTIS_DEBUG, 1, "I/O Write: (0x%02x to 0x%02x)", data, addr); + mutex_unlock(&ca->ca_lock); + udelay(50); + + return 0; +} + +int mantis_hif_init(struct mantis_ca *ca) +{ + struct mantis_slot *slot = ca->slot; + struct mantis_pci *mantis = ca->ca_priv; + u32 irqcfg; + + slot[0].slave_cfg = 0x70773028; + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Initializing Mantis Host Interface", mantis->num); + + mutex_lock(&ca->ca_lock); + irqcfg = mmread(MANTIS_GPIF_IRQCFG); + irqcfg = MANTIS_MASK_BRRDY | + MANTIS_MASK_WRACK | + MANTIS_MASK_EXTIRQ | + MANTIS_MASK_WSTO | + MANTIS_MASK_OTHERR | + MANTIS_MASK_OVFLW; + + mmwrite(irqcfg, MANTIS_GPIF_IRQCFG); + mutex_unlock(&ca->ca_lock); + + return 0; +} + +void mantis_hif_exit(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + u32 irqcfg; + + dprintk(MANTIS_ERROR, 1, "Adapter(%d) Exiting Mantis Host Interface", mantis->num); + mutex_lock(&ca->ca_lock); + irqcfg = mmread(MANTIS_GPIF_IRQCFG); + irqcfg &= ~MANTIS_MASK_BRRDY; + mmwrite(irqcfg, MANTIS_GPIF_IRQCFG); + mutex_unlock(&ca->ca_lock); +} diff --git a/drivers/media/dvb/mantis/mantis_hif.h b/drivers/media/dvb/mantis/mantis_hif.h new file mode 100644 index 00000000000..9094f9ed236 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_hif.h @@ -0,0 +1,29 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_HIF_H +#define __MANTIS_HIF_H + +#define MANTIS_HIF_MEMRD 1 +#define MANTIS_HIF_MEMWR 2 +#define MANTIS_HIF_IOMRD 3 +#define MANTIS_HIF_IOMWR 4 + +#endif /* __MANTIS_HIF_H */ diff --git a/drivers/media/dvb/mantis/mantis_i2c.c b/drivers/media/dvb/mantis/mantis_i2c.c new file mode 100644 index 00000000000..7870bcf9689 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_i2c.c @@ -0,0 +1,267 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <asm/io.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/i2c.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_i2c.h" + +#define TRIALS 10000 + +static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) +{ + u32 rxd, i, stat, trials; + + dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <R>[ ", + __func__, msg->addr); + + for (i = 0; i < msg->len; i++) { + rxd = (msg->addr << 25) | (1 << 24) + | MANTIS_I2C_RATE_3 + | MANTIS_I2C_STOP + | MANTIS_I2C_PGMODE; + + if (i == (msg->len - 1)) + rxd &= ~MANTIS_I2C_STOP; + + mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); + mmwrite(rxd, MANTIS_I2CDATA_CTL); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CDONE) + break; + } + + dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CRACK) + break; + } + + dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); + + rxd = mmread(MANTIS_I2CDATA_CTL); + msg->buf[i] = (u8)((rxd >> 8) & 0xFF); + dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); + } + dprintk(MANTIS_INFO, 0, "]\n"); + + return 0; +} + +static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg) +{ + int i; + u32 txd = 0, stat, trials; + + dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <W>[ ", + __func__, msg->addr); + + for (i = 0; i < msg->len; i++) { + dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); + txd = (msg->addr << 25) | (msg->buf[i] << 8) + | MANTIS_I2C_RATE_3 + | MANTIS_I2C_STOP + | MANTIS_I2C_PGMODE; + + if (i == (msg->len - 1)) + txd &= ~MANTIS_I2C_STOP; + + mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); + mmwrite(txd, MANTIS_I2CDATA_CTL); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CDONE) + break; + } + + dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); + + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CRACK) + break; + } + + dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); + } + dprintk(MANTIS_INFO, 0, "]\n"); + + return 0; +} + +static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) +{ + int ret = 0, i = 0, trials; + u32 stat, data, txd; + struct mantis_pci *mantis; + struct mantis_hwconfig *config; + + mantis = i2c_get_adapdata(adapter); + BUG_ON(!mantis); + config = mantis->hwconfig; + BUG_ON(!config); + + dprintk(MANTIS_DEBUG, 1, "Messages:%d", num); + mutex_lock(&mantis->i2c_lock); + + while (i < num) { + /* Byte MODE */ + if ((config->i2c_mode & MANTIS_BYTE_MODE) && + ((i + 1) < num) && + (msgs[i].len < 2) && + (msgs[i + 1].len < 2) && + (msgs[i + 1].flags & I2C_M_RD)) { + + dprintk(MANTIS_DEBUG, 0, " Byte MODE:\n"); + + /* Read operation */ + txd = msgs[i].addr << 25 | (0x1 << 24) + | (msgs[i].buf[0] << 16) + | MANTIS_I2C_RATE_3; + + mmwrite(txd, MANTIS_I2CDATA_CTL); + /* wait for xfer completion */ + for (trials = 0; trials < TRIALS; trials++) { + stat = mmread(MANTIS_INT_STAT); + if (stat & MANTIS_INT_I2CDONE) + break; + } + + /* check for xfer completion */ + if (stat & MANTIS_INT_I2CDONE) { + /* check xfer was acknowledged */ + if (stat & MANTIS_INT_I2CRACK) { + data = mmread(MANTIS_I2CDATA_CTL); + msgs[i + 1].buf[0] = (data >> 8) & 0xff; + dprintk(MANTIS_DEBUG, 0, " Byte <%d> RXD=0x%02x [%02x]\n", 0x0, data, msgs[i + 1].buf[0]); + } else { + /* I/O error */ + dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__); + ret = -EIO; + break; + } + } else { + /* I/O error */ + dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__); + ret = -EIO; + break; + } + i += 2; /* Write/Read operation in one go */ + } + + if (i < num) { + if (msgs[i].flags & I2C_M_RD) + ret = mantis_i2c_read(mantis, &msgs[i]); + else + ret = mantis_i2c_write(mantis, &msgs[i]); + + i++; + if (ret < 0) + goto bail_out; + } + + } + + mutex_unlock(&mantis->i2c_lock); + + return num; + +bail_out: + mutex_unlock(&mantis->i2c_lock); + return ret; +} + +static u32 mantis_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm mantis_algo = { + .master_xfer = mantis_i2c_xfer, + .functionality = mantis_i2c_func, +}; + +int __devinit mantis_i2c_init(struct mantis_pci *mantis) +{ + u32 intstat, intmask; + struct i2c_adapter *i2c_adapter = &mantis->adapter; + struct pci_dev *pdev = mantis->pdev; + + init_waitqueue_head(&mantis->i2c_wq); + mutex_init(&mantis->i2c_lock); + strncpy(i2c_adapter->name, "Mantis I2C", sizeof(i2c_adapter->name)); + i2c_set_adapdata(i2c_adapter, mantis); + + i2c_adapter->owner = THIS_MODULE; + i2c_adapter->class = I2C_CLASS_TV_DIGITAL; + i2c_adapter->algo = &mantis_algo; + i2c_adapter->algo_data = NULL; + i2c_adapter->timeout = 500; + i2c_adapter->retries = 3; + i2c_adapter->dev.parent = &pdev->dev; + + mantis->i2c_rc = i2c_add_adapter(i2c_adapter); + if (mantis->i2c_rc < 0) + return mantis->i2c_rc; + + dprintk(MANTIS_DEBUG, 1, "Initializing I2C .."); + + intstat = mmread(MANTIS_INT_STAT); + intmask = mmread(MANTIS_INT_MASK); + mmwrite(intstat, MANTIS_INT_STAT); + dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt"); + intmask = mmread(MANTIS_INT_MASK); + mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK); + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_i2c_init); + +int mantis_i2c_exit(struct mantis_pci *mantis) +{ + u32 intmask; + + dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt"); + intmask = mmread(MANTIS_INT_MASK); + mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK); + + dprintk(MANTIS_DEBUG, 1, "Removing I2C adapter"); + return i2c_del_adapter(&mantis->adapter); +} +EXPORT_SYMBOL_GPL(mantis_i2c_exit); diff --git a/drivers/media/dvb/mantis/mantis_i2c.h b/drivers/media/dvb/mantis/mantis_i2c.h new file mode 100644 index 00000000000..1342df2faed --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_i2c.h @@ -0,0 +1,30 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_I2C_H +#define __MANTIS_I2C_H + +#define I2C_STOP (1 << 0) +#define I2C_READ (1 << 1) + +extern int mantis_i2c_init(struct mantis_pci *mantis); +extern int mantis_i2c_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_I2C_H */ diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c new file mode 100644 index 00000000000..6a9df779441 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_input.c @@ -0,0 +1,148 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/input.h> +#include <media/ir-common.h> +#include <linux/pci.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_uart.h" + +static struct ir_scancode mantis_ir_table[] = { + { 0x29, KEY_POWER }, + { 0x28, KEY_FAVORITES }, + { 0x30, KEY_TEXT }, + { 0x17, KEY_INFO }, /* Preview */ + { 0x23, KEY_EPG }, + { 0x3b, KEY_F22 }, /* Record List */ + { 0x3c, KEY_1 }, + { 0x3e, KEY_2 }, + { 0x39, KEY_3 }, + { 0x36, KEY_4 }, + { 0x22, KEY_5 }, + { 0x20, KEY_6 }, + { 0x32, KEY_7 }, + { 0x26, KEY_8 }, + { 0x24, KEY_9 }, + { 0x2a, KEY_0 }, + + { 0x33, KEY_CANCEL }, + { 0x2c, KEY_BACK }, + { 0x15, KEY_CLEAR }, + { 0x3f, KEY_TAB }, + { 0x10, KEY_ENTER }, + { 0x14, KEY_UP }, + { 0x0d, KEY_RIGHT }, + { 0x0e, KEY_DOWN }, + { 0x11, KEY_LEFT }, + + { 0x21, KEY_VOLUMEUP }, + { 0x35, KEY_VOLUMEDOWN }, + { 0x3d, KEY_CHANNELDOWN }, + { 0x3a, KEY_CHANNELUP }, + { 0x2e, KEY_RECORD }, + { 0x2b, KEY_PLAY }, + { 0x13, KEY_PAUSE }, + { 0x25, KEY_STOP }, + + { 0x1f, KEY_REWIND }, + { 0x2d, KEY_FASTFORWARD }, + { 0x1e, KEY_PREVIOUS }, /* Replay |< */ + { 0x1d, KEY_NEXT }, /* Skip >| */ + + { 0x0b, KEY_CAMERA }, /* Capture */ + { 0x0f, KEY_LANGUAGE }, /* SAP */ + { 0x18, KEY_MODE }, /* PIP */ + { 0x12, KEY_ZOOM }, /* Full screen */ + { 0x1c, KEY_SUBTITLE }, + { 0x2f, KEY_MUTE }, + { 0x16, KEY_F20 }, /* L/R */ + { 0x38, KEY_F21 }, /* Hibernate */ + + { 0x37, KEY_SWITCHVIDEOMODE }, /* A/V */ + { 0x31, KEY_AGAIN }, /* Recall */ + { 0x1a, KEY_KPPLUS }, /* Zoom+ */ + { 0x19, KEY_KPMINUS }, /* Zoom- */ + { 0x27, KEY_RED }, + { 0x0C, KEY_GREEN }, + { 0x01, KEY_YELLOW }, + { 0x00, KEY_BLUE }, +}; + +struct ir_scancode_table ir_mantis = { + .scan = mantis_ir_table, + .size = ARRAY_SIZE(mantis_ir_table), +}; +EXPORT_SYMBOL_GPL(ir_mantis); + +int mantis_input_init(struct mantis_pci *mantis) +{ + struct input_dev *rc; + struct ir_input_state rc_state; + char name[80], dev[80]; + int err; + + rc = input_allocate_device(); + if (!rc) { + dprintk(MANTIS_ERROR, 1, "Input device allocate failed"); + return -ENOMEM; + } + + sprintf(name, "Mantis %s IR receiver", mantis->hwconfig->model_name); + sprintf(dev, "pci-%s/ir0", pci_name(mantis->pdev)); + + rc->name = name; + rc->phys = dev; + + ir_input_init(rc, &rc_state, IR_TYPE_OTHER); + + rc->id.bustype = BUS_PCI; + rc->id.vendor = mantis->vendor_id; + rc->id.product = mantis->device_id; + rc->id.version = 1; + rc->dev = mantis->pdev->dev; + + err = ir_input_register(rc, &ir_mantis); + if (err) { + dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err); + input_free_device(rc); + return -ENODEV; + } + + mantis->rc = rc; + + return 0; +} + +int mantis_exit(struct mantis_pci *mantis) +{ + struct input_dev *rc = mantis->rc; + + ir_input_unregister(rc); + + return 0; +} diff --git a/drivers/media/dvb/mantis/mantis_ioc.c b/drivers/media/dvb/mantis/mantis_ioc.c new file mode 100644 index 00000000000..de148ded52d --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_ioc.c @@ -0,0 +1,130 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> +#include <linux/i2c.h> + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_ioc.h" + +static int read_eeprom_bytes(struct mantis_pci *mantis, u8 reg, u8 *data, u8 length) +{ + struct i2c_adapter *adapter = &mantis->adapter; + int err; + u8 buf = reg; + + struct i2c_msg msg[] = { + { .addr = 0x50, .flags = 0, .buf = &buf, .len = 1 }, + { .addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = length }, + }; + + err = i2c_transfer(adapter, msg, 2); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >", + err, data[0], data[1]); + + return err; + } + + return 0; +} +int mantis_get_mac(struct mantis_pci *mantis) +{ + int err; + u8 mac_addr[6] = {0}; + + err = read_eeprom_bytes(mantis, 0x08, mac_addr, 6); + if (err < 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Mantis EEPROM read error <%d>", err); + + return err; + } + + dprintk(MANTIS_ERROR, 0, + " MAC Address=[%02x:%02x:%02x:%02x:%02x:%02x]\n", + mac_addr[0], + mac_addr[1], + mac_addr[2], + mac_addr[3], + mac_addr[4], + mac_addr[5]); + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_get_mac); + +/* Turn the given bit on or off. */ +void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value) +{ + u32 cur; + + dprintk(MANTIS_DEBUG, 1, "Set Bit <%d> to <%d>", bitpos, value); + cur = mmread(MANTIS_GPIF_ADDR); + if (value) + mantis->gpio_status = cur | (1 << bitpos); + else + mantis->gpio_status = cur & (~(1 << bitpos)); + + dprintk(MANTIS_DEBUG, 1, "GPIO Value <%02x>", mantis->gpio_status); + mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR); + mmwrite(0x00, MANTIS_GPIF_DOUT); +} +EXPORT_SYMBOL_GPL(gpio_set_bits); + +int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl) +{ + u32 reg; + + reg = mmread(MANTIS_CONTROL); + switch (stream_ctl) { + case STREAM_TO_HIF: + dprintk(MANTIS_DEBUG, 1, "Set stream to HIF"); + reg &= 0xff - MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + reg |= MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + break; + + case STREAM_TO_CAM: + dprintk(MANTIS_DEBUG, 1, "Set stream to CAM"); + reg |= MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + reg &= 0xff - MANTIS_BYPASS; + mmwrite(reg, MANTIS_CONTROL); + break; + default: + dprintk(MANTIS_ERROR, 1, "Unknown MODE <%02x>", stream_ctl); + return -1; + } + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_stream_control); diff --git a/drivers/media/dvb/mantis/mantis_ioc.h b/drivers/media/dvb/mantis/mantis_ioc.h new file mode 100644 index 00000000000..188fe5a8161 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_ioc.h @@ -0,0 +1,51 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_IOC_H +#define __MANTIS_IOC_H + +#define GPIF_A00 0x00 +#define GPIF_A01 0x01 +#define GPIF_A02 0x02 +#define GPIF_A03 0x03 +#define GPIF_A04 0x04 +#define GPIF_A05 0x05 +#define GPIF_A06 0x06 +#define GPIF_A07 0x07 +#define GPIF_A08 0x08 +#define GPIF_A09 0x09 +#define GPIF_A10 0x0a +#define GPIF_A11 0x0b + +#define GPIF_A12 0x0c +#define GPIF_A13 0x0d +#define GPIF_A14 0x0e + +enum mantis_stream_control { + STREAM_TO_HIF = 0, + STREAM_TO_CAM +}; + +extern int mantis_get_mac(struct mantis_pci *mantis); +extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value); + +extern int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl); + +#endif /* __MANTIS_IOC_H */ diff --git a/drivers/media/dvb/mantis/mantis_link.h b/drivers/media/dvb/mantis/mantis_link.h new file mode 100644 index 00000000000..2a814774a00 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_link.h @@ -0,0 +1,83 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_LINK_H +#define __MANTIS_LINK_H + +#include <linux/mutex.h> +#include <linux/workqueue.h> +#include "dvb_ca_en50221.h" + +enum mantis_sbuf_status { + MANTIS_SBUF_DATA_AVAIL = 1, + MANTIS_SBUF_DATA_EMPTY = 2, + MANTIS_SBUF_DATA_OVFLW = 3 +}; + +struct mantis_slot { + u32 timeout; + u32 slave_cfg; + u32 bar; +}; + +/* Physical layer */ +enum mantis_slot_state { + MODULE_INSERTED = 3, + MODULE_XTRACTED = 4 +}; + +struct mantis_ca { + struct mantis_slot slot[4]; + + struct work_struct hif_evm_work; + + u32 hif_event; + wait_queue_head_t hif_opdone_wq; + wait_queue_head_t hif_brrdyw_wq; + wait_queue_head_t hif_data_wq; + wait_queue_head_t hif_write_wq; /* HIF Write op */ + + enum mantis_sbuf_status sbuf_status; + + enum mantis_slot_state slot_state; + + void *ca_priv; + + struct dvb_ca_en50221 en50221; + struct mutex ca_lock; +}; + +/* CA */ +extern void mantis_event_cam_plugin(struct mantis_ca *ca); +extern void mantis_event_cam_unplug(struct mantis_ca *ca); +extern int mantis_pcmcia_init(struct mantis_ca *ca); +extern void mantis_pcmcia_exit(struct mantis_ca *ca); +extern int mantis_evmgr_init(struct mantis_ca *ca); +extern void mantis_evmgr_exit(struct mantis_ca *ca); + +/* HIF */ +extern int mantis_hif_init(struct mantis_ca *ca); +extern void mantis_hif_exit(struct mantis_ca *ca); +extern int mantis_hif_read_mem(struct mantis_ca *ca, u32 addr); +extern int mantis_hif_write_mem(struct mantis_ca *ca, u32 addr, u8 data); +extern int mantis_hif_read_iom(struct mantis_ca *ca, u32 addr); +extern int mantis_hif_write_iom(struct mantis_ca *ca, u32 addr, u8 data); + +#endif /* __MANTIS_LINK_H */ diff --git a/drivers/media/dvb/mantis/mantis_pci.c b/drivers/media/dvb/mantis/mantis_pci.c new file mode 100644 index 00000000000..6c7534af6b4 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_pci.c @@ -0,0 +1,177 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <linux/kmod.h> +#include <linux/vmalloc.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/pci.h> + +#include <asm/irq.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include <asm/irq.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_pci.h" + +#define DRIVER_NAME "Mantis Core" + +int __devinit mantis_pci_init(struct mantis_pci *mantis) +{ + u8 revision, latency; + struct mantis_hwconfig *config = mantis->hwconfig; + struct pci_dev *pdev = mantis->pdev; + int err, ret = 0; + + dprintk(MANTIS_ERROR, 0, "found a %s PCI %s device on (%02x:%02x.%x),\n", + config->model_name, + config->dev_type, + mantis->pdev->bus->number, + PCI_SLOT(mantis->pdev->devfn), + PCI_FUNC(mantis->pdev->devfn)); + + err = pci_enable_device(pdev); + if (err != 0) { + ret = -ENODEV; + dprintk(MANTIS_ERROR, 1, "ERROR: PCI enable failed <%i>", err); + goto fail0; + } + + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err != 0) { + dprintk(MANTIS_ERROR, 1, "ERROR: Unable to obtain 32 bit DMA <%i>", err); + ret = -ENOMEM; + goto fail1; + } + + pci_set_master(pdev); + + if (!request_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0), + DRIVER_NAME)) { + + dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 Request failed !"); + ret = -ENODEV; + goto fail1; + } + + mantis->mmio = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + + if (!mantis->mmio) { + dprintk(MANTIS_ERROR, 1, "ERROR: BAR0 remap failed !"); + ret = -ENODEV; + goto fail2; + } + + pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency); + pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision); + mantis->latency = latency; + mantis->revision = revision; + + dprintk(MANTIS_ERROR, 0, " Mantis Rev %d [%04x:%04x], ", + mantis->revision, + mantis->pdev->subsystem_vendor, + mantis->pdev->subsystem_device); + + dprintk(MANTIS_ERROR, 0, + "irq: %d, latency: %d\n memory: 0x%lx, mmio: 0x%p\n", + mantis->pdev->irq, + mantis->latency, + mantis->mantis_addr, + mantis->mmio); + + err = request_irq(pdev->irq, + config->irq_handler, + IRQF_SHARED, + DRIVER_NAME, + mantis); + + if (err != 0) { + + dprintk(MANTIS_ERROR, 1, "ERROR: IRQ registration failed ! <%d>", err); + ret = -ENODEV; + goto fail3; + } + + pci_set_drvdata(pdev, mantis); + return ret; + + /* Error conditions */ +fail3: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> I/O unmap", ret); + if (mantis->mmio) + iounmap(mantis->mmio); + +fail2: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> releasing regions", ret); + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + +fail1: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> disabling device", ret); + pci_disable_device(pdev); + +fail0: + dprintk(MANTIS_ERROR, 1, "ERROR: <%d> exiting", ret); + pci_set_drvdata(pdev, NULL); + return ret; +} +EXPORT_SYMBOL_GPL(mantis_pci_init); + +void mantis_pci_exit(struct mantis_pci *mantis) +{ + struct pci_dev *pdev = mantis->pdev; + + dprintk(MANTIS_NOTICE, 1, " mem: 0x%p", mantis->mmio); + free_irq(pdev->irq, mantis); + if (mantis->mmio) { + iounmap(mantis->mmio); + release_mem_region(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + } + + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +} +EXPORT_SYMBOL_GPL(mantis_pci_exit); + +MODULE_DESCRIPTION("Mantis PCI DTV bridge driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/mantis/mantis_pci.h b/drivers/media/dvb/mantis/mantis_pci.h new file mode 100644 index 00000000000..65f00451908 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_pci.h @@ -0,0 +1,27 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_PCI_H +#define __MANTIS_PCI_H + +extern int mantis_pci_init(struct mantis_pci *mantis); +extern void mantis_pci_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_PCI_H */ diff --git a/drivers/media/dvb/mantis/mantis_pcmcia.c b/drivers/media/dvb/mantis/mantis_pcmcia.c new file mode 100644 index 00000000000..5cb545b913f --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_pcmcia.c @@ -0,0 +1,120 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_link.h" /* temporary due to physical layer stuff */ +#include "mantis_reg.h" + +/* + * If Slot state is already PLUG_IN event and we are called + * again, definitely it is jitter alone + */ +void mantis_event_cam_plugin(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + u32 gpif_irqcfg; + + if (ca->slot_state == MODULE_XTRACTED) { + dprintk(MANTIS_DEBUG, 1, "Event: CAM Plugged IN: Adapter(%d) Slot(0)", mantis->num); + udelay(50); + mmwrite(0xda000000, MANTIS_CARD_RESET); + gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG); + gpif_irqcfg |= MANTIS_MASK_PLUGOUT; + gpif_irqcfg &= ~MANTIS_MASK_PLUGIN; + mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG); + udelay(500); + ca->slot_state = MODULE_INSERTED; + } + udelay(100); +} + +/* + * If Slot state is already UN_PLUG event and we are called + * again, definitely it is jitter alone + */ +void mantis_event_cam_unplug(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + u32 gpif_irqcfg; + + if (ca->slot_state == MODULE_INSERTED) { + dprintk(MANTIS_DEBUG, 1, "Event: CAM Unplugged: Adapter(%d) Slot(0)", mantis->num); + udelay(50); + mmwrite(0x00da0000, MANTIS_CARD_RESET); + gpif_irqcfg = mmread(MANTIS_GPIF_IRQCFG); + gpif_irqcfg |= MANTIS_MASK_PLUGIN; + gpif_irqcfg &= ~MANTIS_MASK_PLUGOUT; + mmwrite(gpif_irqcfg, MANTIS_GPIF_IRQCFG); + udelay(500); + ca->slot_state = MODULE_XTRACTED; + } + udelay(100); +} + +int mantis_pcmcia_init(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + u32 gpif_stat, card_stat; + + mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_IRQ0, MANTIS_INT_MASK); + gpif_stat = mmread(MANTIS_GPIF_STATUS); + card_stat = mmread(MANTIS_GPIF_IRQCFG); + + if (gpif_stat & MANTIS_GPIF_DETSTAT) { + dprintk(MANTIS_DEBUG, 1, "CAM found on Adapter(%d) Slot(0)", mantis->num); + mmwrite(card_stat | MANTIS_MASK_PLUGOUT, MANTIS_GPIF_IRQCFG); + ca->slot_state = MODULE_INSERTED; + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_INSERTED); + } else { + dprintk(MANTIS_DEBUG, 1, "Empty Slot on Adapter(%d) Slot(0)", mantis->num); + mmwrite(card_stat | MANTIS_MASK_PLUGIN, MANTIS_GPIF_IRQCFG); + ca->slot_state = MODULE_XTRACTED; + dvb_ca_en50221_camchange_irq(&ca->en50221, + 0, + DVB_CA_EN50221_CAMCHANGE_REMOVED); + } + + return 0; +} + +void mantis_pcmcia_exit(struct mantis_ca *ca) +{ + struct mantis_pci *mantis = ca->ca_priv; + + mmwrite(mmread(MANTIS_GPIF_STATUS) & (~MANTIS_CARD_PLUGOUT | ~MANTIS_CARD_PLUGIN), MANTIS_GPIF_STATUS); + mmwrite(mmread(MANTIS_INT_MASK) & ~MANTIS_INT_IRQ0, MANTIS_INT_MASK); +} diff --git a/drivers/media/dvb/mantis/mantis_reg.h b/drivers/media/dvb/mantis/mantis_reg.h new file mode 100644 index 00000000000..7761f9dc7fe --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_reg.h @@ -0,0 +1,197 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_REG_H +#define __MANTIS_REG_H + +/* Interrupts */ +#define MANTIS_INT_STAT 0x00 +#define MANTIS_INT_MASK 0x04 + +#define MANTIS_INT_RISCSTAT (0x0f << 28) +#define MANTIS_INT_RISCEN (0x01 << 27) +#define MANTIS_INT_I2CRACK (0x01 << 26) + +/* #define MANTIS_INT_GPIF (0xff << 12) */ + +#define MANTIS_INT_PCMCIA7 (0x01 << 19) +#define MANTIS_INT_PCMCIA6 (0x01 << 18) +#define MANTIS_INT_PCMCIA5 (0x01 << 17) +#define MANTIS_INT_PCMCIA4 (0x01 << 16) +#define MANTIS_INT_PCMCIA3 (0x01 << 15) +#define MANTIS_INT_PCMCIA2 (0x01 << 14) +#define MANTIS_INT_PCMCIA1 (0x01 << 13) +#define MANTIS_INT_PCMCIA0 (0x01 << 12) +#define MANTIS_INT_IRQ1 (0x01 << 11) +#define MANTIS_INT_IRQ0 (0x01 << 10) +#define MANTIS_INT_OCERR (0x01 << 8) +#define MANTIS_INT_PABORT (0x01 << 7) +#define MANTIS_INT_RIPERR (0x01 << 6) +#define MANTIS_INT_PPERR (0x01 << 5) +#define MANTIS_INT_FTRGT (0x01 << 3) +#define MANTIS_INT_RISCI (0x01 << 1) +#define MANTIS_INT_I2CDONE (0x01 << 0) + +/* DMA */ +#define MANTIS_DMA_CTL 0x08 +#define MANTIS_GPIF_RD (0xff << 24) +#define MANTIS_GPIF_WR (0xff << 16) +#define MANTIS_CPU_DO (0x01 << 10) +#define MANTIS_DRV_DO (0x01 << 9) +#define MANTIS_I2C_RD (0x01 << 7) +#define MANTIS_I2C_WR (0x01 << 6) +#define MANTIS_DCAP_MODE (0x01 << 5) +#define MANTIS_FIFO_TP_4 (0x00 << 3) +#define MANTIS_FIFO_TP_8 (0x01 << 3) +#define MANTIS_FIFO_TP_16 (0x02 << 3) +#define MANTIS_FIFO_EN (0x01 << 2) +#define MANTIS_DCAP_EN (0x01 << 1) +#define MANTIS_RISC_EN (0x01 << 0) + +/* DEBUG */ +#define MANTIS_DEBUGREG 0x0c +#define MANTIS_DATINV (0x0e << 7) +#define MANTIS_TOP_DEBUGSEL (0x07 << 4) +#define MANTIS_PCMCIA_DEBUGSEL (0x0f << 0) + +#define MANTIS_RISC_START 0x10 +#define MANTIS_RISC_PC 0x14 + +/* I2C */ +#define MANTIS_I2CDATA_CTL 0x18 +#define MANTIS_I2C_RATE_1 (0x00 << 6) +#define MANTIS_I2C_RATE_2 (0x01 << 6) +#define MANTIS_I2C_RATE_3 (0x02 << 6) +#define MANTIS_I2C_RATE_4 (0x03 << 6) +#define MANTIS_I2C_STOP (0x01 << 5) +#define MANTIS_I2C_PGMODE (0x01 << 3) + +/* DATA */ +#define MANTIS_CMD_DATA_R1 0x20 +#define MANTIS_CMD_DATA_3 (0xff << 24) +#define MANTIS_CMD_DATA_2 (0xff << 16) +#define MANTIS_CMD_DATA_1 (0xff << 8) +#define MANTIS_CMD_DATA_0 (0xff << 0) + +#define MANTIS_CMD_DATA_R2 0x24 +#define MANTIS_CMD_DATA_7 (0xff << 24) +#define MANTIS_CMD_DATA_6 (0xff << 16) +#define MANTIS_CMD_DATA_5 (0xff << 8) +#define MANTIS_CMD_DATA_4 (0xff << 0) + +#define MANTIS_CONTROL 0x28 +#define MANTIS_DET (0x01 << 7) +#define MANTIS_DAT_CF_EN (0x01 << 6) +#define MANTIS_ACS (0x03 << 4) +#define MANTIS_VCCEN (0x01 << 3) +#define MANTIS_BYPASS (0x01 << 2) +#define MANTIS_MRST (0x01 << 1) +#define MANTIS_CRST_INT (0x01 << 0) + +#define MANTIS_GPIF_CFGSLA 0x84 +#define MANTIS_GPIF_WAITSMPL (0x07 << 28) +#define MANTIS_GPIF_BYTEADDRSUB (0x01 << 25) +#define MANTIS_GPIF_WAITPOL (0x01 << 24) +#define MANTIS_GPIF_NCDELAY (0x07 << 20) +#define MANTIS_GPIF_RW2CSDELAY (0x07 << 16) +#define MANTIS_GPIF_SLFTIMEDMODE (0x01 << 15) +#define MANTIS_GPIF_SLFTIMEDDELY (0x7f << 8) +#define MANTIS_GPIF_DEVTYPE (0x07 << 4) +#define MANTIS_GPIF_BIGENDIAN (0x01 << 3) +#define MANTIS_GPIF_FETCHCMD (0x03 << 1) +#define MANTIS_GPIF_HWORDDEV (0x01 << 0) + +#define MANTIS_GPIF_WSTOPER 0x90 +#define MANTIS_GPIF_WSTOPERWREN3 (0x01 << 31) +#define MANTIS_GPIF_PARBOOTN (0x01 << 29) +#define MANTIS_GPIF_WSTOPERSLID3 (0x1f << 24) +#define MANTIS_GPIF_WSTOPERWREN2 (0x01 << 23) +#define MANTIS_GPIF_WSTOPERSLID2 (0x1f << 16) +#define MANTIS_GPIF_WSTOPERWREN1 (0x01 << 15) +#define MANTIS_GPIF_WSTOPERSLID1 (0x1f << 8) +#define MANTIS_GPIF_WSTOPERWREN0 (0x01 << 7) +#define MANTIS_GPIF_WSTOPERSLID0 (0x1f << 0) + +#define MANTIS_GPIF_CS2RW 0x94 +#define MANTIS_GPIF_CS2RWWREN3 (0x01 << 31) +#define MANTIS_GPIF_CS2RWDELY3 (0x3f << 24) +#define MANTIS_GPIF_CS2RWWREN2 (0x01 << 23) +#define MANTIS_GPIF_CS2RWDELY2 (0x3f << 16) +#define MANTIS_GPIF_CS2RWWREN1 (0x01 << 15) +#define MANTIS_GPIF_CS2RWDELY1 (0x3f << 8) +#define MANTIS_GPIF_CS2RWWREN0 (0x01 << 7) +#define MANTIS_GPIF_CS2RWDELY0 (0x3f << 0) + +#define MANTIS_GPIF_IRQCFG 0x98 +#define MANTIS_GPIF_IRQPOL (0x01 << 8) +#define MANTIS_MASK_WRACK (0x01 << 7) +#define MANTIS_MASK_BRRDY (0x01 << 6) +#define MANTIS_MASK_OVFLW (0x01 << 5) +#define MANTIS_MASK_OTHERR (0x01 << 4) +#define MANTIS_MASK_WSTO (0x01 << 3) +#define MANTIS_MASK_EXTIRQ (0x01 << 2) +#define MANTIS_MASK_PLUGIN (0x01 << 1) +#define MANTIS_MASK_PLUGOUT (0x01 << 0) + +#define MANTIS_GPIF_STATUS 0x9c +#define MANTIS_SBUF_KILLOP (0x01 << 15) +#define MANTIS_SBUF_OPDONE (0x01 << 14) +#define MANTIS_SBUF_EMPTY (0x01 << 13) +#define MANTIS_GPIF_DETSTAT (0x01 << 9) +#define MANTIS_GPIF_INTSTAT (0x01 << 8) +#define MANTIS_GPIF_WRACK (0x01 << 7) +#define MANTIS_GPIF_BRRDY (0x01 << 6) +#define MANTIS_SBUF_OVFLW (0x01 << 5) +#define MANTIS_GPIF_OTHERR (0x01 << 4) +#define MANTIS_SBUF_WSTO (0x01 << 3) +#define MANTIS_GPIF_EXTIRQ (0x01 << 2) +#define MANTIS_CARD_PLUGIN (0x01 << 1) +#define MANTIS_CARD_PLUGOUT (0x01 << 0) + +#define MANTIS_GPIF_BRADDR 0xa0 +#define MANTIS_GPIF_PCMCIAREG (0x01 << 27) +#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26) +#define MANTIS_GPIF_BR_ADDR (0xfffffff << 0) + +#define MANTIS_GPIF_BRBYTES 0xa4 +#define MANTIS_GPIF_BRCNT (0xfff << 0) + +#define MANTIS_PCMCIA_RESET 0xa8 +#define MANTIS_PCMCIA_RSTVAL (0xff << 0) + +#define MANTIS_CARD_RESET 0xac + +#define MANTIS_GPIF_ADDR 0xb0 +#define MANTIS_GPIF_HIFRDWRN (0x01 << 31) +#define MANTIS_GPIF_PCMCIAREG (0x01 << 27) +#define MANTIS_GPIF_PCMCIAIOM (0x01 << 26) +#define MANTIS_GPIF_HIFADDR (0xfffffff << 0) + +#define MANTIS_GPIF_DOUT 0xb4 +#define MANTIS_GPIF_HIFDOUT (0xfffffff << 0) + +#define MANTIS_GPIF_DIN 0xb8 +#define MANTIS_GPIF_HIFDIN (0xfffffff << 0) + +#define MANTIS_GPIF_SPARE 0xbc +#define MANTIS_GPIF_LOGICRD (0xffff << 16) +#define MANTIS_GPIF_LOGICRW (0xffff << 0) + +#endif /* __MANTIS_REG_H */ diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c new file mode 100644 index 00000000000..7d2f2398fa8 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_uart.c @@ -0,0 +1,186 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> +#include <linux/spinlock.h> + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_reg.h" +#include "mantis_uart.h" + +struct mantis_uart_params { + enum mantis_baud baud_rate; + enum mantis_parity parity; +}; + +static struct { + char string[7]; +} rates[5] = { + { "9600" }, + { "19200" }, + { "38400" }, + { "57600" }, + { "115200" } +}; + +static struct { + char string[5]; +} parity[3] = { + { "NONE" }, + { "ODD" }, + { "EVEN" } +}; + +#define UART_MAX_BUF 16 + +int mantis_uart_read(struct mantis_pci *mantis, u8 *data) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + u32 stat = 0, i; + + /* get data */ + for (i = 0; i < (config->bytes + 1); i++) { + + stat = mmread(MANTIS_UART_STAT); + + if (stat & MANTIS_UART_RXFIFO_FULL) { + dprintk(MANTIS_ERROR, 1, "RX Fifo FULL"); + } + data[i] = mmread(MANTIS_UART_RXD) & 0x3f; + + dprintk(MANTIS_DEBUG, 1, "Reading ... <%02x>", data[i] & 0x3f); + + if (data[i] & (1 << 7)) { + dprintk(MANTIS_ERROR, 1, "UART framing error"); + return -EINVAL; + } + if (data[i] & (1 << 6)) { + dprintk(MANTIS_ERROR, 1, "UART parity error"); + return -EINVAL; + } + } + + return 0; +} + +static void mantis_uart_work(struct work_struct *work) +{ + struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work); + struct mantis_hwconfig *config = mantis->hwconfig; + u8 buf[16]; + int i; + + mantis_uart_read(mantis, buf); + + for (i = 0; i < (config->bytes + 1); i++) + dprintk(MANTIS_INFO, 1, "UART BUF:%d <%02x> ", i, buf[i]); + + dprintk(MANTIS_DEBUG, 0, "\n"); +} + +static int mantis_uart_setup(struct mantis_pci *mantis, + struct mantis_uart_params *params) +{ + u32 reg; + + mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL); + + reg = mmread(MANTIS_UART_BAUD); + + switch (params->baud_rate) { + case MANTIS_BAUD_9600: + reg |= 0xd8; + break; + case MANTIS_BAUD_19200: + reg |= 0x6c; + break; + case MANTIS_BAUD_38400: + reg |= 0x36; + break; + case MANTIS_BAUD_57600: + reg |= 0x23; + break; + case MANTIS_BAUD_115200: + reg |= 0x11; + break; + default: + return -EINVAL; + } + + mmwrite(reg, MANTIS_UART_BAUD); + + return 0; +} + +int mantis_uart_init(struct mantis_pci *mantis) +{ + struct mantis_hwconfig *config = mantis->hwconfig; + struct mantis_uart_params params; + + /* default parity: */ + params.baud_rate = config->baud_rate; + params.parity = config->parity; + dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s", + rates[params.baud_rate].string, + parity[params.parity].string); + + init_waitqueue_head(&mantis->uart_wq); + spin_lock_init(&mantis->uart_lock); + + INIT_WORK(&mantis->uart_work, mantis_uart_work); + + /* disable interrupt */ + mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL); + + mantis_uart_setup(mantis, ¶ms); + + /* default 1 byte */ + mmwrite((mmread(MANTIS_UART_BAUD) | (config->bytes << 8)), MANTIS_UART_BAUD); + + /* flush buffer */ + mmwrite((mmread(MANTIS_UART_CTL) | MANTIS_UART_RXFLUSH), MANTIS_UART_CTL); + + /* enable interrupt */ + mmwrite(mmread(MANTIS_INT_MASK) | 0x800, MANTIS_INT_MASK); + mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL); + + schedule_work(&mantis->uart_work); + dprintk(MANTIS_DEBUG, 1, "UART succesfully initialized"); + + return 0; +} +EXPORT_SYMBOL_GPL(mantis_uart_init); + +void mantis_uart_exit(struct mantis_pci *mantis) +{ + /* disable interrupt */ + mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL); +} +EXPORT_SYMBOL_GPL(mantis_uart_exit); diff --git a/drivers/media/dvb/mantis/mantis_uart.h b/drivers/media/dvb/mantis/mantis_uart.h new file mode 100644 index 00000000000..ffb62a0a5a1 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_uart.h @@ -0,0 +1,58 @@ +/* + Mantis PCI bridge driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_UART_H +#define __MANTIS_UART_H + +#define MANTIS_UART_CTL 0xe0 +#define MANTIS_UART_RXINT (1 << 4) +#define MANTIS_UART_RXFLUSH (1 << 2) + +#define MANTIS_UART_RXD 0xe8 +#define MANTIS_UART_BAUD 0xec + +#define MANTIS_UART_STAT 0xf0 +#define MANTIS_UART_RXFIFO_DATA (1 << 7) +#define MANTIS_UART_RXFIFO_EMPTY (1 << 6) +#define MANTIS_UART_RXFIFO_FULL (1 << 3) +#define MANTIS_UART_FRAME_ERR (1 << 2) +#define MANTIS_UART_PARITY_ERR (1 << 1) +#define MANTIS_UART_RXTHRESH_INT (1 << 0) + +enum mantis_baud { + MANTIS_BAUD_9600 = 0, + MANTIS_BAUD_19200, + MANTIS_BAUD_38400, + MANTIS_BAUD_57600, + MANTIS_BAUD_115200 +}; + +enum mantis_parity { + MANTIS_PARITY_NONE = 0, + MANTIS_PARITY_EVEN, + MANTIS_PARITY_ODD, +}; + +struct mantis_pci; + +extern int mantis_uart_init(struct mantis_pci *mantis); +extern void mantis_uart_exit(struct mantis_pci *mantis); + +#endif /* __MANTIS_UART_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c new file mode 100644 index 00000000000..4a723bda003 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1033.c @@ -0,0 +1,212 @@ +/* + Mantis VP-1033 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "stv0299.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp1033.h" +#include "mantis_reg.h" + +u8 lgtdqcs001f_inittab[] = { + 0x01, 0x15, + 0x02, 0x00, + 0x03, 0x00, + 0x04, 0x2a, + 0x05, 0x85, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0x00, + 0x0c, 0x01, + 0x0d, 0x81, + 0x0e, 0x44, + 0x0f, 0x94, + 0x10, 0x3c, + 0x11, 0x84, + 0x12, 0xb9, + 0x13, 0xb5, + 0x14, 0x4f, + 0x15, 0xc9, + 0x16, 0x80, + 0x17, 0x36, + 0x18, 0xfb, + 0x19, 0xcf, + 0x1a, 0xbc, + 0x1c, 0x2b, + 0x1d, 0x27, + 0x1e, 0x00, + 0x1f, 0x0b, + 0x20, 0xa1, + 0x21, 0x60, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, + 0x29, 0x28, + 0x2a, 0x14, + 0x2b, 0x0f, + 0x2c, 0x09, + 0x2d, 0x05, + 0x31, 0x1f, + 0x32, 0x19, + 0x33, 0xfc, + 0x34, 0x13, + 0xff, 0xff, +}; + +#define MANTIS_MODEL_NAME "VP-1033" +#define MANTIS_DEV_TYPE "DVB-S/DSS" + +int lgtdqcs001f_tuner_set(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + struct mantis_pci *mantis = fe->dvb->priv; + struct i2c_adapter *adapter = &mantis->adapter; + + u8 buf[4]; + u32 div; + + + struct i2c_msg msg = {.addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf)}; + + div = params->frequency / 250; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x83; + buf[3] = 0xc0; + + if (params->frequency < 1531000) + buf[3] |= 0x04; + else + buf[3] &= ~0x04; + if (i2c_transfer(adapter, &msg, 1) < 0) { + dprintk(MANTIS_ERROR, 1, "Write: I2C Transfer failed"); + return -EIO; + } + msleep_interruptible(100); + + return 0; +} + +int lgtdqcs001f_set_symbol_rate(struct dvb_frontend *fe, + u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + + if (srate < 1500000) { + aclk = 0xb7; + bclk = 0x47; + } else if (srate < 3000000) { + aclk = 0xb7; + bclk = 0x4b; + } else if (srate < 7000000) { + aclk = 0xb7; + bclk = 0x4f; + } else if (srate < 14000000) { + aclk = 0xb7; + bclk = 0x53; + } else if (srate < 30000000) { + aclk = 0xb6; + bclk = 0x53; + } else if (srate < 45000000) { + aclk = 0xb4; + bclk = 0x51; + } + stv0299_writereg(fe, 0x13, aclk); + stv0299_writereg(fe, 0x14, bclk); + + stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg(fe, 0x21, ratio & 0xf0); + + return 0; +} + +struct stv0299_config lgtdqcs001f_config = { + .demod_address = 0x68, + .inittab = lgtdqcs001f_inittab, + .mclk = 88000000UL, + .invert = 0, + .skip_reinit = 0, + .volt13_op0_op1 = STV0299_VOLT13_OP0, + .min_delay_ms = 100, + .set_symbol_rate = lgtdqcs001f_set_symbol_rate, +}; + +static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)"); + fe = stv0299_attach(&lgtdqcs001f_config, adapter); + + if (fe) { + fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set; + dprintk(MANTIS_ERROR, 1, "found STV0299 DVB-S frontend @ 0x%02x", + lgtdqcs001f_config.demod_address); + + dprintk(MANTIS_ERROR, 1, "Mantis DVB-S STV0299 frontend attach success"); + } else { + return -1; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + mantis->fe = fe; + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp1033_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp1033_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp1033.h b/drivers/media/dvb/mantis/mantis_vp1033.h new file mode 100644 index 00000000000..7daaa1bf127 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1033.h @@ -0,0 +1,30 @@ +/* + Mantis VP-1033 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP1033_H +#define __MANTIS_VP1033_H + +#include "mantis_common.h" + +#define MANTIS_VP_1033_DVB_S 0x0016 + +extern struct mantis_hwconfig vp1033_config; + +#endif /* __MANTIS_VP1033_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c new file mode 100644 index 00000000000..8e6ae558ee5 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1034.c @@ -0,0 +1,119 @@ +/* + Mantis VP-1034 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mb86a16.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp1034.h" +#include "mantis_reg.h" + +struct mb86a16_config vp1034_mb86a16_config = { + .demod_address = 0x08, + .set_voltage = vp1034_set_voltage, +}; + +#define MANTIS_MODEL_NAME "VP-1034" +#define MANTIS_DEV_TYPE "DVB-S/DSS" + +int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct mantis_pci *mantis = fe->dvb->priv; + + switch (voltage) { + case SEC_VOLTAGE_13: + dprintk(MANTIS_ERROR, 1, "Polarization=[13V]"); + gpio_set_bits(mantis, 13, 1); + gpio_set_bits(mantis, 14, 0); + break; + case SEC_VOLTAGE_18: + dprintk(MANTIS_ERROR, 1, "Polarization=[18V]"); + gpio_set_bits(mantis, 13, 1); + gpio_set_bits(mantis, 14, 1); + break; + case SEC_VOLTAGE_OFF: + dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN"); + break; + default: + dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32) voltage); + return -EINVAL; + } + mmwrite(0x00, MANTIS_GPIF_DOUT); + + return 0; +} + +static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)"); + fe = mb86a16_attach(&vp1034_mb86a16_config, adapter); + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found MB86A16 DVB-S/DSS frontend @0x%02x", + vp1034_mb86a16_config.demod_address); + + } else { + return -1; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + mantis->fe = fe; + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp1034_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp1034_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp1034.h b/drivers/media/dvb/mantis/mantis_vp1034.h new file mode 100644 index 00000000000..323f38ef8e3 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1034.h @@ -0,0 +1,33 @@ +/* + Mantis VP-1034 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP1034_H +#define __MANTIS_VP1034_H + +#include "dvb_frontend.h" +#include "mantis_common.h" + + +#define MANTIS_VP_1034_DVB_S 0x0014 + +extern struct mantis_hwconfig vp1034_config; +extern int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage); + +#endif /* __MANTIS_VP1034_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c new file mode 100644 index 00000000000..515346dd31d --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1041.c @@ -0,0 +1,358 @@ +/* + Mantis VP-1041 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp1041.h" +#include "stb0899_reg.h" +#include "stb0899_drv.h" +#include "stb0899_cfg.h" +#include "stb6100_cfg.h" +#include "stb6100.h" +#include "lnbp21.h" + +#define MANTIS_MODEL_NAME "VP-1041" +#define MANTIS_DEV_TYPE "DSS/DVB-S/DVB-S2" + +static const struct stb0899_s1_reg vp1041_stb0899_s1_init_1[] = { + + /* 0x0000000b, *//* SYSREG */ + { STB0899_DEV_ID , 0x30 }, + { STB0899_DISCNTRL1 , 0x32 }, + { STB0899_DISCNTRL2 , 0x80 }, + { STB0899_DISRX_ST0 , 0x04 }, + { STB0899_DISRX_ST1 , 0x00 }, + { STB0899_DISPARITY , 0x00 }, + { STB0899_DISFIFO , 0x00 }, + { STB0899_DISSTATUS , 0x20 }, + { STB0899_DISF22 , 0x99 }, + { STB0899_DISF22RX , 0xa8 }, + /* SYSREG ? */ + { STB0899_ACRPRESC , 0x11 }, + { STB0899_ACRDIV1 , 0x0a }, + { STB0899_ACRDIV2 , 0x05 }, + { STB0899_DACR1 , 0x00 }, + { STB0899_DACR2 , 0x00 }, + { STB0899_OUTCFG , 0x00 }, + { STB0899_MODECFG , 0x00 }, + { STB0899_IRQSTATUS_3 , 0xfe }, + { STB0899_IRQSTATUS_2 , 0x03 }, + { STB0899_IRQSTATUS_1 , 0x7c }, + { STB0899_IRQSTATUS_0 , 0xf4 }, + { STB0899_IRQMSK_3 , 0xf3 }, + { STB0899_IRQMSK_2 , 0xfc }, + { STB0899_IRQMSK_1 , 0xff }, + { STB0899_IRQMSK_0 , 0xff }, + { STB0899_IRQCFG , 0x00 }, + { STB0899_I2CCFG , 0x88 }, + { STB0899_I2CRPT , 0x58 }, + { STB0899_IOPVALUE5 , 0x00 }, + { STB0899_IOPVALUE4 , 0x33 }, + { STB0899_IOPVALUE3 , 0x6d }, + { STB0899_IOPVALUE2 , 0x90 }, + { STB0899_IOPVALUE1 , 0x60 }, + { STB0899_IOPVALUE0 , 0x00 }, + { STB0899_GPIO00CFG , 0x82 }, + { STB0899_GPIO01CFG , 0x82 }, + { STB0899_GPIO02CFG , 0x82 }, + { STB0899_GPIO03CFG , 0x82 }, + { STB0899_GPIO04CFG , 0x82 }, + { STB0899_GPIO05CFG , 0x82 }, + { STB0899_GPIO06CFG , 0x82 }, + { STB0899_GPIO07CFG , 0x82 }, + { STB0899_GPIO08CFG , 0x82 }, + { STB0899_GPIO09CFG , 0x82 }, + { STB0899_GPIO10CFG , 0x82 }, + { STB0899_GPIO11CFG , 0x82 }, + { STB0899_GPIO12CFG , 0x82 }, + { STB0899_GPIO13CFG , 0x82 }, + { STB0899_GPIO14CFG , 0x82 }, + { STB0899_GPIO15CFG , 0x82 }, + { STB0899_GPIO16CFG , 0x82 }, + { STB0899_GPIO17CFG , 0x82 }, + { STB0899_GPIO18CFG , 0x82 }, + { STB0899_GPIO19CFG , 0x82 }, + { STB0899_GPIO20CFG , 0x82 }, + { STB0899_SDATCFG , 0xb8 }, + { STB0899_SCLTCFG , 0xba }, + { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */ + { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ + { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ + { STB0899_DIRCLKCFG , 0x82 }, + { STB0899_CLKOUT27CFG , 0x7e }, + { STB0899_STDBYCFG , 0x82 }, + { STB0899_CS0CFG , 0x82 }, + { STB0899_CS1CFG , 0x82 }, + { STB0899_DISEQCOCFG , 0x20 }, + { STB0899_GPIO32CFG , 0x82 }, + { STB0899_GPIO33CFG , 0x82 }, + { STB0899_GPIO34CFG , 0x82 }, + { STB0899_GPIO35CFG , 0x82 }, + { STB0899_GPIO36CFG , 0x82 }, + { STB0899_GPIO37CFG , 0x82 }, + { STB0899_GPIO38CFG , 0x82 }, + { STB0899_GPIO39CFG , 0x82 }, + { STB0899_NCOARSE , 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ + { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ + { STB0899_FILTCTRL , 0x00 }, + { STB0899_SYSCTRL , 0x01 }, + { STB0899_STOPCLK1 , 0x20 }, + { STB0899_STOPCLK2 , 0x00 }, + { STB0899_INTBUFSTATUS , 0x00 }, + { STB0899_INTBUFCTRL , 0x0a }, + { 0xffff , 0xff }, +}; + +static const struct stb0899_s1_reg vp1041_stb0899_s1_init_3[] = { + { STB0899_DEMOD , 0x00 }, + { STB0899_RCOMPC , 0xc9 }, + { STB0899_AGC1CN , 0x01 }, + { STB0899_AGC1REF , 0x10 }, + { STB0899_RTC , 0x23 }, + { STB0899_TMGCFG , 0x4e }, + { STB0899_AGC2REF , 0x34 }, + { STB0899_TLSR , 0x84 }, + { STB0899_CFD , 0xf7 }, + { STB0899_ACLC , 0x87 }, + { STB0899_BCLC , 0x94 }, + { STB0899_EQON , 0x41 }, + { STB0899_LDT , 0xf1 }, + { STB0899_LDT2 , 0xe3 }, + { STB0899_EQUALREF , 0xb4 }, + { STB0899_TMGRAMP , 0x10 }, + { STB0899_TMGTHD , 0x30 }, + { STB0899_IDCCOMP , 0xfd }, + { STB0899_QDCCOMP , 0xff }, + { STB0899_POWERI , 0x0c }, + { STB0899_POWERQ , 0x0f }, + { STB0899_RCOMP , 0x6c }, + { STB0899_AGCIQIN , 0x80 }, + { STB0899_AGC2I1 , 0x06 }, + { STB0899_AGC2I2 , 0x00 }, + { STB0899_TLIR , 0x30 }, + { STB0899_RTF , 0x7f }, + { STB0899_DSTATUS , 0x00 }, + { STB0899_LDI , 0xbc }, + { STB0899_CFRM , 0xea }, + { STB0899_CFRL , 0x31 }, + { STB0899_NIRM , 0x2b }, + { STB0899_NIRL , 0x80 }, + { STB0899_ISYMB , 0x1d }, + { STB0899_QSYMB , 0xa6 }, + { STB0899_SFRH , 0x2f }, + { STB0899_SFRM , 0x68 }, + { STB0899_SFRL , 0x40 }, + { STB0899_SFRUPH , 0x2f }, + { STB0899_SFRUPM , 0x68 }, + { STB0899_SFRUPL , 0x40 }, + { STB0899_EQUAI1 , 0x02 }, + { STB0899_EQUAQ1 , 0xff }, + { STB0899_EQUAI2 , 0x04 }, + { STB0899_EQUAQ2 , 0x05 }, + { STB0899_EQUAI3 , 0x02 }, + { STB0899_EQUAQ3 , 0xfd }, + { STB0899_EQUAI4 , 0x03 }, + { STB0899_EQUAQ4 , 0x07 }, + { STB0899_EQUAI5 , 0x08 }, + { STB0899_EQUAQ5 , 0xf5 }, + { STB0899_DSTATUS2 , 0x00 }, + { STB0899_VSTATUS , 0x00 }, + { STB0899_VERROR , 0x86 }, + { STB0899_IQSWAP , 0x2a }, + { STB0899_ECNT1M , 0x00 }, + { STB0899_ECNT1L , 0x00 }, + { STB0899_ECNT2M , 0x00 }, + { STB0899_ECNT2L , 0x00 }, + { STB0899_ECNT3M , 0x0a }, + { STB0899_ECNT3L , 0xad }, + { STB0899_FECAUTO1 , 0x06 }, + { STB0899_FECM , 0x01 }, + { STB0899_VTH12 , 0xb0 }, + { STB0899_VTH23 , 0x7a }, + { STB0899_VTH34 , 0x58 }, + { STB0899_VTH56 , 0x38 }, + { STB0899_VTH67 , 0x34 }, + { STB0899_VTH78 , 0x24 }, + { STB0899_PRVIT , 0xff }, + { STB0899_VITSYNC , 0x19 }, + { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ + { STB0899_TSULC , 0x42 }, + { STB0899_RSLLC , 0x41 }, + { STB0899_TSLPL , 0x12 }, + { STB0899_TSCFGH , 0x0c }, + { STB0899_TSCFGM , 0x00 }, + { STB0899_TSCFGL , 0x00 }, + { STB0899_TSOUT , 0x69 }, /* 0x0d for CAM */ + { STB0899_RSSYNCDEL , 0x00 }, + { STB0899_TSINHDELH , 0x02 }, + { STB0899_TSINHDELM , 0x00 }, + { STB0899_TSINHDELL , 0x00 }, + { STB0899_TSLLSTKM , 0x1b }, + { STB0899_TSLLSTKL , 0xb3 }, + { STB0899_TSULSTKM , 0x00 }, + { STB0899_TSULSTKL , 0x00 }, + { STB0899_PCKLENUL , 0xbc }, + { STB0899_PCKLENLL , 0xcc }, + { STB0899_RSPCKLEN , 0xbd }, + { STB0899_TSSTATUS , 0x90 }, + { STB0899_ERRCTRL1 , 0xb6 }, + { STB0899_ERRCTRL2 , 0x95 }, + { STB0899_ERRCTRL3 , 0x8d }, + { STB0899_DMONMSK1 , 0x27 }, + { STB0899_DMONMSK0 , 0x03 }, + { STB0899_DEMAPVIT , 0x5c }, + { STB0899_PLPARM , 0x19 }, + { STB0899_PDELCTRL , 0x48 }, + { STB0899_PDELCTRL2 , 0x00 }, + { STB0899_BBHCTRL1 , 0x00 }, + { STB0899_BBHCTRL2 , 0x00 }, + { STB0899_HYSTTHRESH , 0x77 }, + { STB0899_MATCSTM , 0x00 }, + { STB0899_MATCSTL , 0x00 }, + { STB0899_UPLCSTM , 0x00 }, + { STB0899_UPLCSTL , 0x00 }, + { STB0899_DFLCSTM , 0x00 }, + { STB0899_DFLCSTL , 0x00 }, + { STB0899_SYNCCST , 0x00 }, + { STB0899_SYNCDCSTM , 0x00 }, + { STB0899_SYNCDCSTL , 0x00 }, + { STB0899_ISI_ENTRY , 0x00 }, + { STB0899_ISI_BIT_EN , 0x00 }, + { STB0899_MATSTRM , 0xf0 }, + { STB0899_MATSTRL , 0x02 }, + { STB0899_UPLSTRM , 0x45 }, + { STB0899_UPLSTRL , 0x60 }, + { STB0899_DFLSTRM , 0xe3 }, + { STB0899_DFLSTRL , 0x00 }, + { STB0899_SYNCSTR , 0x47 }, + { STB0899_SYNCDSTRM , 0x05 }, + { STB0899_SYNCDSTRL , 0x18 }, + { STB0899_CFGPDELSTATUS1 , 0x19 }, + { STB0899_CFGPDELSTATUS2 , 0x2b }, + { STB0899_BBFERRORM , 0x00 }, + { STB0899_BBFERRORL , 0x01 }, + { STB0899_UPKTERRORM , 0x00 }, + { STB0899_UPKTERRORL , 0x00 }, + { 0xffff , 0xff }, +}; + +struct stb0899_config vp1041_stb0899_config = { + .init_dev = vp1041_stb0899_s1_init_1, + .init_s2_demod = stb0899_s2_init_2, + .init_s1_demod = vp1041_stb0899_s1_init_3, + .init_s2_fec = stb0899_s2_init_4, + .init_tst = stb0899_s1_init_5, + + .demod_address = 0x68, /* 0xd0 >> 1 */ + + .xtal_freq = 27000000, + .inversion = IQ_SWAP_ON, /* 1 */ + + .lo_clk = 76500000, + .hi_clk = 99000000, + + .esno_ave = STB0899_DVBS2_ESNO_AVE, + .esno_quant = STB0899_DVBS2_ESNO_QUANT, + .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, + .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, + .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, + .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, + .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, + .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, + .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, + + .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, + .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, + .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, + .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, + + .tuner_get_frequency = stb6100_get_frequency, + .tuner_set_frequency = stb6100_set_frequency, + .tuner_set_bandwidth = stb6100_set_bandwidth, + .tuner_get_bandwidth = stb6100_get_bandwidth, + .tuner_set_rfsiggain = NULL, +}; + +struct stb6100_config vp1041_stb6100_config = { + .tuner_address = 0x60, + .refclock = 27000000, +}; + +static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + mantis->fe = stb0899_attach(&vp1041_stb0899_config, adapter); + if (mantis->fe) { + dprintk(MANTIS_ERROR, 1, + "found STB0899 DVB-S/DVB-S2 frontend @0x%02x", + vp1041_stb0899_config.demod_address); + + if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, adapter)) { + if (!lnbp21_attach(mantis->fe, adapter, 0, 0)) + dprintk(MANTIS_ERROR, 1, "No LNBP21 found!"); + } + } else { + return -EREMOTEIO; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + + + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp1041_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp1041_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp1041.h b/drivers/media/dvb/mantis/mantis_vp1041.h new file mode 100644 index 00000000000..1ae5b3de808 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp1041.h @@ -0,0 +1,33 @@ +/* + Mantis VP-1041 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP1041_H +#define __MANTIS_VP1041_H + +#include "mantis_common.h" + +#define MANTIS_VP_1041_DVB_S2 0x0031 +#define SKYSTAR_HD2_10 0x0001 +#define SKYSTAR_HD2_20 0x0003 +#define CINERGY_S2_PCI_HD 0x1179 + +extern struct mantis_hwconfig vp1041_config; + +#endif /* __MANTIS_VP1041_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c new file mode 100644 index 00000000000..10ce81790a8 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp2033.c @@ -0,0 +1,187 @@ +/* + Mantis VP-2033 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "tda1002x.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp2033.h" + +#define MANTIS_MODEL_NAME "VP-2033" +#define MANTIS_DEV_TYPE "DVB-C" + +struct tda1002x_config vp2033_tda1002x_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; + +struct tda10023_config vp2033_tda10023_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; + +static u8 read_pwm(struct mantis_pci *mantis) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + u8 b = 0xff; + u8 pwm; + struct i2c_msg msg[] = { + {.addr = 0x50, .flags = 0, .buf = &b, .len = 1}, + {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1} + }; + + if ((i2c_transfer(adapter, msg, 2) != 2) + || (pwm == 0xff)) + pwm = 0x48; + + return pwm; +} + +static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + struct mantis_pci *mantis = fe->dvb->priv; + struct i2c_adapter *adapter = &mantis->adapter; + + u8 buf[6]; + struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)}; + int i; + +#define CU1216_IF 36125000 +#define TUNER_MUL 62500 + + u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0xce; + buf[3] = (params->frequency < 150000000 ? 0x01 : + params->frequency < 445000000 ? 0x02 : 0x04); + buf[4] = 0xde; + buf[5] = 0x20; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) != 1) + return -EIO; + + /* wait for the pll lock */ + msg.flags = I2C_M_RD; + msg.len = 1; + for (i = 0; i < 20; i++) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40)) + break; + + msleep(10); + } + + /* switch the charge pump to the lower current */ + msg.flags = 0; + msg.len = 2; + msg.buf = &buf[2]; + buf[2] &= ~0x40; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) != 1) + return -EIO; + + return 0; +} + +static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); + fe = tda10021_attach(&vp2033_tda1002x_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", + vp2033_tda1002x_cu1216_config.demod_address); + } else { + fe = tda10023_attach(&vp2033_tda10023_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + vp2033_tda1002x_cu1216_config.demod_address); + } + } + + if (fe) { + fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; + dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + } else { + return -1; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + + mantis->fe = fe; + dprintk(MANTIS_DEBUG, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp2033_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp2033_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp2033.h b/drivers/media/dvb/mantis/mantis_vp2033.h new file mode 100644 index 00000000000..c55242b79d5 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp2033.h @@ -0,0 +1,30 @@ +/* + Mantis VP-2033 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP2033_H +#define __MANTIS_VP2033_H + +#include "mantis_common.h" + +#define MANTIS_VP_2033_DVB_C 0x0008 + +extern struct mantis_hwconfig vp2033_config; + +#endif /* __MANTIS_VP2033_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c new file mode 100644 index 00000000000..a7ca233e800 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp2040.c @@ -0,0 +1,186 @@ +/* + Mantis VP-2040 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "tda1002x.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp2040.h" + +#define MANTIS_MODEL_NAME "VP-2040" +#define MANTIS_DEV_TYPE "DVB-C" + +struct tda1002x_config vp2040_tda1002x_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; + +struct tda10023_config vp2040_tda10023_cu1216_config = { + .demod_address = 0x18 >> 1, + .invert = 1, +}; + +static int tda1002x_cu1216_tuner_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + struct mantis_pci *mantis = fe->dvb->priv; + struct i2c_adapter *adapter = &mantis->adapter; + + u8 buf[6]; + struct i2c_msg msg = {.addr = 0x60, .flags = 0, .buf = buf, .len = sizeof(buf)}; + int i; + +#define CU1216_IF 36125000 +#define TUNER_MUL 62500 + + u32 div = (params->frequency + CU1216_IF + TUNER_MUL / 2) / TUNER_MUL; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0xce; + buf[3] = (params->frequency < 150000000 ? 0x01 : + params->frequency < 445000000 ? 0x02 : 0x04); + buf[4] = 0xde; + buf[5] = 0x20; + + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) != 1) + return -EIO; + + /* wait for the pll lock */ + msg.flags = I2C_M_RD; + msg.len = 1; + for (i = 0; i < 20; i++) { + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) == 1 && (buf[0] & 0x40)) + break; + + msleep(10); + } + + /* switch the charge pump to the lower current */ + msg.flags = 0; + msg.len = 2; + msg.buf = &buf[2]; + buf[2] &= ~0x40; + if (fe->ops.i2c_gate_ctrl) + fe->ops.i2c_gate_ctrl(fe, 1); + + if (i2c_transfer(adapter, &msg, 1) != 1) + return -EIO; + + return 0; +} + +static u8 read_pwm(struct mantis_pci *mantis) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + u8 b = 0xff; + u8 pwm; + struct i2c_msg msg[] = { + {.addr = 0x50, .flags = 0, .buf = &b, .len = 1}, + {.addr = 0x50, .flags = I2C_M_RD, .buf = &pwm, .len = 1} + }; + + if ((i2c_transfer(adapter, msg, 2) != 2) + || (pwm == 0xff)) + pwm = 0x48; + + return pwm; +} + +static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + + int err = 0; + + err = mantis_frontend_power(mantis, POWER_ON); + if (err == 0) { + mantis_frontend_soft_reset(mantis); + msleep(250); + + dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)"); + fe = tda10021_attach(&vp2040_tda1002x_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x", + vp2040_tda1002x_cu1216_config.demod_address); + } else { + fe = tda10023_attach(&vp2040_tda10023_cu1216_config, + adapter, + read_pwm(mantis)); + + if (fe) { + dprintk(MANTIS_ERROR, 1, + "found Philips CU1216 DVB-C frontend (TDA10023) @ 0x%02x", + vp2040_tda1002x_cu1216_config.demod_address); + } + } + + if (fe) { + fe->ops.tuner_ops.set_params = tda1002x_cu1216_tuner_set; + dprintk(MANTIS_ERROR, 1, "Mantis DVB-C Philips CU1216 frontend attach success"); + } else { + return -1; + } + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + } + mantis->fe = fe; + dprintk(MANTIS_DEBUG, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp2040_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_204, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp2040_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp2040.h b/drivers/media/dvb/mantis/mantis_vp2040.h new file mode 100644 index 00000000000..d125e219b68 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp2040.h @@ -0,0 +1,32 @@ +/* + Mantis VP-2040 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP2040_H +#define __MANTIS_VP2040_H + +#include "mantis_common.h" + +#define MANTIS_VP_2040_DVB_C 0x0043 +#define CINERGY_C 0x1178 +#define CABLESTAR_HD2 0x0002 + +extern struct mantis_hwconfig vp2040_config; + +#endif /* __MANTIS_VP2040_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp3028.c b/drivers/media/dvb/mantis/mantis_vp3028.c new file mode 100644 index 00000000000..4155c838a18 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp3028.c @@ -0,0 +1,38 @@ +/* + Mantis VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include "mantis_common.h" +#include "mantis_vp3028.h" + +struct zl10353_config mantis_vp3028_config = { + .demod_address = 0x0f, +}; + +#define MANTIS_MODEL_NAME "VP-3028" +#define MANTIS_DEV_TYPE "DVB-T" + +struct mantis_hwconfig vp3028_mantis_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, +}; diff --git a/drivers/media/dvb/mantis/mantis_vp3028.h b/drivers/media/dvb/mantis/mantis_vp3028.h new file mode 100644 index 00000000000..b07be6adc52 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp3028.h @@ -0,0 +1,33 @@ +/* + Mantis VP-3028 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP3028_H +#define __MANTIS_VP3028_H + +#include "dvb_frontend.h" +#include "mantis_common.h" +#include "zl10353.h" + +#define MANTIS_VP_3028_DVB_T 0x0028 + +extern struct zl10353_config mantis_vp3028_config; +extern struct mantis_hwconfig vp3028_mantis_config; + +#endif /* __MANTIS_VP3028_H */ diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c new file mode 100644 index 00000000000..1f433421495 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp3030.c @@ -0,0 +1,105 @@ +/* + Mantis VP-3030 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include "dmxdev.h" +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" + +#include "zl10353.h" +#include "tda665x.h" +#include "mantis_common.h" +#include "mantis_ioc.h" +#include "mantis_dvb.h" +#include "mantis_vp3030.h" + +struct zl10353_config mantis_vp3030_config = { + .demod_address = 0x0f, +}; + +struct tda665x_config env57h12d5_config = { + .name = "ENV57H12D5 (ET-50DT)", + .addr = 0x60, + .frequency_min = 47000000, + .frequency_max = 862000000, + .frequency_offst = 3616667, + .ref_multiplier = 6, /* 1/6 MHz */ + .ref_divider = 100000, /* 1/6 MHz */ +}; + +#define MANTIS_MODEL_NAME "VP-3030" +#define MANTIS_DEV_TYPE "DVB-T" + + +static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe) +{ + struct i2c_adapter *adapter = &mantis->adapter; + struct mantis_hwconfig *config = mantis->hwconfig; + int err = 0; + + gpio_set_bits(mantis, config->reset, 0); + msleep(100); + err = mantis_frontend_power(mantis, POWER_ON); + msleep(100); + gpio_set_bits(mantis, config->reset, 1); + + if (err == 0) { + msleep(250); + dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)"); + fe = zl10353_attach(&mantis_vp3030_config, adapter); + + if (!fe) + return -1; + + tda665x_attach(fe, &env57h12d5_config, adapter); + } else { + dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>", + adapter->name, + err); + + return -EIO; + + } + mantis->fe = fe; + dprintk(MANTIS_ERROR, 1, "Done!"); + + return 0; +} + +struct mantis_hwconfig vp3030_config = { + .model_name = MANTIS_MODEL_NAME, + .dev_type = MANTIS_DEV_TYPE, + .ts_size = MANTIS_TS_188, + + .baud_rate = MANTIS_BAUD_9600, + .parity = MANTIS_PARITY_NONE, + .bytes = 0, + + .frontend_init = vp3030_frontend_init, + .power = GPIF_A12, + .reset = GPIF_A13, + + .i2c_mode = MANTIS_BYTE_MODE +}; diff --git a/drivers/media/dvb/mantis/mantis_vp3030.h b/drivers/media/dvb/mantis/mantis_vp3030.h new file mode 100644 index 00000000000..5f12c426627 --- /dev/null +++ b/drivers/media/dvb/mantis/mantis_vp3030.h @@ -0,0 +1,30 @@ +/* + Mantis VP-3030 driver + + Copyright (C) Manu Abraham (abraham.manu@gmail.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __MANTIS_VP3030_H +#define __MANTIS_VP3030_H + +#include "mantis_common.h" + +#define MANTIS_VP_3030_DVB_T 0x0024 + +extern struct mantis_hwconfig vp3030_config; + +#endif /* __MANTIS_VP3030_H */ diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index e930a67d526..bd6214d4ab3 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -1815,6 +1815,8 @@ static int vidioc_qbuf(struct file *file, void *priv, /* put the buffer in the 'queued' queue */ i = gspca_dev->fr_q; gspca_dev->fr_queue[i] = index; + if (gspca_dev->fr_i == i) + gspca_dev->cur_frame = frame; gspca_dev->fr_q = (i + 1) % gspca_dev->nframes; PDEBUG(D_FRAM, "qbuf q:%d i:%d o:%d", gspca_dev->fr_q, diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index aa2f3c7e2cb..1b536f7d30c 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -48,6 +48,12 @@ static DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xa 2528") } }, { + .ident = "Fujitsu-Siemens Amilo Xi 2428", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 2428") + } + }, { .ident = "Fujitsu-Siemens Amilo Xi 2528", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c index 4dbb882c83d..0a6b8f07a69 100644 --- a/drivers/media/video/gspca/ov534.c +++ b/drivers/media/video/gspca/ov534.c @@ -1533,7 +1533,7 @@ static void setexposure_96(struct gspca_dev *gspca_dev) static void setsharpness_96(struct gspca_dev *gspca_dev) { struct sd *sd = (struct sd *) gspca_dev; - u8 val; + s8 val; val = sd->sharpness; if (val < 0) { /* auto */ diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c index 4cff8035614..0ca1c06652b 100644 --- a/drivers/media/video/gspca/sn9c20x.c +++ b/drivers/media/video/gspca/sn9c20x.c @@ -2319,7 +2319,7 @@ static void do_autogain(struct gspca_dev *gspca_dev, u16 avg_lum) } } if (avg_lum > MAX_AVG_LUM) { - if (sd->gain - 1 >= 0) { + if (sd->gain >= 1) { sd->gain--; set_gain(gspca_dev); } diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h index 487d4055534..96c61926d37 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h +++ b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h @@ -228,6 +228,7 @@ static const struct stv_init stv_bridge_init[] = { /* This reg is written twice. Some kind of reset? */ {NULL, 0x1620, 0x80}, {NULL, 0x1620, 0x00}, + {NULL, 0x1443, 0x00}, {NULL, 0x1423, 0x04}, {x1500, 0x1500, ARRAY_SIZE(x1500)}, {x1536, 0x1536, ARRAY_SIZE(x1536)}, diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c index 716df6b15fc..306b7d75b4a 100644 --- a/drivers/media/video/gspca/sunplus.c +++ b/drivers/media/video/gspca/sunplus.c @@ -709,7 +709,7 @@ static void spca504B_SetSizeType(struct gspca_dev *gspca_dev) spca504B_PollingDataReady(gspca_dev); /* Init the cam width height with some values get on init ? */ - reg_w_riv(gspca_dev, 0x31, 0, 0x04); + reg_w_riv(gspca_dev, 0x31, 0x0004, 0x00); spca504B_WaitCmdStatus(gspca_dev); spca504B_PollingDataReady(gspca_dev); break; @@ -807,14 +807,14 @@ static void init_ctl_reg(struct gspca_dev *gspca_dev) default: /* case BRIDGE_SPCA533: */ /* case BRIDGE_SPCA504B: */ - reg_w_riv(gspca_dev, 0, 0x00, 0x21ad); /* hue */ - reg_w_riv(gspca_dev, 0, 0x01, 0x21ac); /* sat/hue */ - reg_w_riv(gspca_dev, 0, 0x00, 0x21a3); /* gamma */ + reg_w_riv(gspca_dev, 0, 0x21ad, 0x00); /* hue */ + reg_w_riv(gspca_dev, 0, 0x21ac, 0x01); /* sat/hue */ + reg_w_riv(gspca_dev, 0, 0x21a3, 0x00); /* gamma */ break; case BRIDGE_SPCA536: - reg_w_riv(gspca_dev, 0, 0x40, 0x20f5); - reg_w_riv(gspca_dev, 0, 0x01, 0x20f4); - reg_w_riv(gspca_dev, 0, 0x00, 0x2089); + reg_w_riv(gspca_dev, 0, 0x20f5, 0x40); + reg_w_riv(gspca_dev, 0, 0x20f4, 0x01); + reg_w_riv(gspca_dev, 0, 0x2089, 0x00); break; } if (pollreg) @@ -887,11 +887,11 @@ static int sd_init(struct gspca_dev *gspca_dev) switch (sd->bridge) { case BRIDGE_SPCA504B: reg_w_riv(gspca_dev, 0x1d, 0x00, 0); - reg_w_riv(gspca_dev, 0, 0x01, 0x2306); - reg_w_riv(gspca_dev, 0, 0x00, 0x0d04); - reg_w_riv(gspca_dev, 0, 0x00, 0x2000); - reg_w_riv(gspca_dev, 0, 0x13, 0x2301); - reg_w_riv(gspca_dev, 0, 0x00, 0x2306); + reg_w_riv(gspca_dev, 0x00, 0x2306, 0x01); + reg_w_riv(gspca_dev, 0x00, 0x0d04, 0x00); + reg_w_riv(gspca_dev, 0x00, 0x2000, 0x00); + reg_w_riv(gspca_dev, 0x00, 0x2301, 0x13); + reg_w_riv(gspca_dev, 0x00, 0x2306, 0x00); /* fall thru */ case BRIDGE_SPCA533: spca504B_PollingDataReady(gspca_dev); @@ -1000,7 +1000,7 @@ static int sd_start(struct gspca_dev *gspca_dev) spca504B_WaitCmdStatus(gspca_dev); break; default: - reg_w_riv(gspca_dev, 0x31, 0, 0x04); + reg_w_riv(gspca_dev, 0x31, 0x0004, 0x00); spca504B_WaitCmdStatus(gspca_dev); spca504B_PollingDataReady(gspca_dev); break; diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c index c090efcd804..71921c87842 100644 --- a/drivers/media/video/gspca/vc032x.c +++ b/drivers/media/video/gspca/vc032x.c @@ -3009,6 +3009,10 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, int l; frame = gspca_get_i_frame(gspca_dev); + if (frame == NULL) { + gspca_dev->last_packet_type = DISCARD_PACKET; + return; + } l = frame->data_end - frame->data; if (len > frame->v4l2_buf.length - l) len = frame->v4l2_buf.length - l; diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c index 2ba14fb5b03..c167cc3de49 100644 --- a/drivers/media/video/mx1_camera.c +++ b/drivers/media/video/mx1_camera.c @@ -718,7 +718,7 @@ static int __init mx1_camera_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!res || !irq) { + if (!res || (int)irq <= 0) { err = -ENODEV; goto exit; } diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c index 7e42989ce0e..805226e0d9c 100644 --- a/drivers/media/video/rj54n1cb0c.c +++ b/drivers/media/video/rj54n1cb0c.c @@ -563,7 +563,7 @@ static int rj54n1_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) struct i2c_client *client = sd->priv; struct rj54n1 *rj54n1 = to_rj54n1(client); struct v4l2_rect *rect = &a->c; - unsigned int dummy, output_w, output_h, + unsigned int dummy = 0, output_w, output_h, input_w = rect->width, input_h = rect->height; int ret; diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index 9f85e917f9f..a7ad7810fdd 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -420,19 +420,6 @@ int saa7134_set_dmabits(struct saa7134_dev *dev) ctrl |= SAA7134_MAIN_CTRL_TE5; irq |= SAA7134_IRQ1_INTE_RA2_1 | SAA7134_IRQ1_INTE_RA2_0; - - /* dma: setup channel 5 (= TS) */ - - saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff); - saa_writeb(SAA7134_TS_DMA1, - ((dev->ts.nr_packets - 1) >> 8) & 0xff); - /* TSNOPIT=0, TSCOLAP=0 */ - saa_writeb(SAA7134_TS_DMA2, - (((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00); - saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE); - saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 | - SAA7134_RS_CONTROL_ME | - (dev->ts.pt_ts.dma >> 12)); } /* set task conditions + field handling */ diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c index 03488ba4c99..b9817d74943 100644 --- a/drivers/media/video/saa7134/saa7134-ts.c +++ b/drivers/media/video/saa7134/saa7134-ts.c @@ -250,6 +250,19 @@ int saa7134_ts_start(struct saa7134_dev *dev) BUG_ON(dev->ts_started); + /* dma: setup channel 5 (= TS) */ + saa_writeb(SAA7134_TS_DMA0, (dev->ts.nr_packets - 1) & 0xff); + saa_writeb(SAA7134_TS_DMA1, + ((dev->ts.nr_packets - 1) >> 8) & 0xff); + /* TSNOPIT=0, TSCOLAP=0 */ + saa_writeb(SAA7134_TS_DMA2, + (((dev->ts.nr_packets - 1) >> 16) & 0x3f) | 0x00); + saa_writel(SAA7134_RS_PITCH(5), TS_PACKET_SIZE); + saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_16 | + SAA7134_RS_CONTROL_ME | + (dev->ts.pt_ts.dma >> 12)); + + /* reset hardware TS buffers */ saa_writeb(SAA7134_TS_SERIAL1, 0x00); saa_writeb(SAA7134_TS_SERIAL1, 0x03); saa_writeb(SAA7134_TS_SERIAL1, 0x00); diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index d69363f0d8c..f09c7140d6b 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -1827,7 +1827,7 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!res || !irq) { + if (!res || (int)irq <= 0) { dev_err(&pdev->dev, "Not enough CEU platform resources.\n"); err = -ENODEV; goto exit; diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index 0469d7a876a..ec8ef8c5560 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -1393,7 +1393,7 @@ uvc_ctrl_prune_entity(struct uvc_device *dev, struct uvc_entity *entity) size = entity->processing.bControlSize; for (i = 0; i < ARRAY_SIZE(blacklist); ++i) { - if (!usb_match_id(dev->intf, &blacklist[i].id)) + if (!usb_match_one_id(dev->intf, &blacklist[i].id)) continue; if (blacklist[i].index >= 8 * size || diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c index f854698c406..ea11839cba4 100644 --- a/drivers/media/video/uvc/uvc_queue.c +++ b/drivers/media/video/uvc/uvc_queue.c @@ -59,9 +59,9 @@ * returns immediately. * * When the buffer is full, the completion handler removes it from the irq - * queue, marks it as ready (UVC_BUF_STATE_DONE) and wakes its wait queue. + * queue, marks it as done (UVC_BUF_STATE_DONE) and wakes its wait queue. * At that point, any process waiting on the buffer will be woken up. If a - * process tries to dequeue a buffer after it has been marked ready, the + * process tries to dequeue a buffer after it has been marked done, the * dequeing will succeed immediately. * * 2. Buffers are queued, user is waiting on a buffer and the device gets @@ -201,6 +201,7 @@ static void __uvc_query_buffer(struct uvc_buffer *buf, break; case UVC_BUF_STATE_QUEUED: case UVC_BUF_STATE_ACTIVE: + case UVC_BUF_STATE_READY: v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED; break; case UVC_BUF_STATE_IDLE: @@ -295,13 +296,15 @@ static int uvc_queue_waiton(struct uvc_buffer *buf, int nonblocking) { if (nonblocking) { return (buf->state != UVC_BUF_STATE_QUEUED && - buf->state != UVC_BUF_STATE_ACTIVE) + buf->state != UVC_BUF_STATE_ACTIVE && + buf->state != UVC_BUF_STATE_READY) ? 0 : -EAGAIN; } return wait_event_interruptible(buf->wait, buf->state != UVC_BUF_STATE_QUEUED && - buf->state != UVC_BUF_STATE_ACTIVE); + buf->state != UVC_BUF_STATE_ACTIVE && + buf->state != UVC_BUF_STATE_READY); } /* @@ -348,6 +351,7 @@ int uvc_dequeue_buffer(struct uvc_video_queue *queue, case UVC_BUF_STATE_IDLE: case UVC_BUF_STATE_QUEUED: case UVC_BUF_STATE_ACTIVE: + case UVC_BUF_STATE_READY: default: uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u " "(driver bug?).\n", buf->state); @@ -489,6 +493,7 @@ struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, spin_lock_irqsave(&queue->irqlock, flags); list_del(&buf->queue); + buf->state = UVC_BUF_STATE_DONE; if (!list_empty(&queue->irqqueue)) nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer, queue); diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index 9a9802830d4..7dcf534a0cf 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -441,7 +441,7 @@ static int uvc_video_decode_start(struct uvc_streaming *stream, if (fid != stream->last_fid && buf->buf.bytesused != 0) { uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit " "toggled).\n"); - buf->state = UVC_BUF_STATE_DONE; + buf->state = UVC_BUF_STATE_READY; return -EAGAIN; } @@ -470,7 +470,7 @@ static void uvc_video_decode_data(struct uvc_streaming *stream, /* Complete the current frame if the buffer size was exceeded. */ if (len > maxlen) { uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n"); - buf->state = UVC_BUF_STATE_DONE; + buf->state = UVC_BUF_STATE_READY; } } @@ -482,7 +482,7 @@ static void uvc_video_decode_end(struct uvc_streaming *stream, uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n"); if (data[0] == len) uvc_trace(UVC_TRACE_FRAME, "EOF in empty payload.\n"); - buf->state = UVC_BUF_STATE_DONE; + buf->state = UVC_BUF_STATE_READY; if (stream->dev->quirks & UVC_QUIRK_STREAM_NO_FID) stream->last_fid ^= UVC_STREAM_FID; } @@ -568,8 +568,7 @@ static void uvc_video_decode_isoc(struct urb *urb, struct uvc_streaming *stream, uvc_video_decode_end(stream, buf, mem, urb->iso_frame_desc[i].actual_length); - if (buf->state == UVC_BUF_STATE_DONE || - buf->state == UVC_BUF_STATE_ERROR) + if (buf->state == UVC_BUF_STATE_READY) buf = uvc_queue_next_buffer(&stream->queue, buf); } } @@ -627,8 +626,7 @@ static void uvc_video_decode_bulk(struct urb *urb, struct uvc_streaming *stream, if (!stream->bulk.skip_payload && buf != NULL) { uvc_video_decode_end(stream, buf, stream->bulk.header, stream->bulk.payload_size); - if (buf->state == UVC_BUF_STATE_DONE || - buf->state == UVC_BUF_STATE_ERROR) + if (buf->state == UVC_BUF_STATE_READY) buf = uvc_queue_next_buffer(&stream->queue, buf); } @@ -669,7 +667,7 @@ static void uvc_video_encode_bulk(struct urb *urb, struct uvc_streaming *stream, stream->bulk.payload_size == stream->bulk.max_payload_size) { if (buf->buf.bytesused == stream->queue.buf_used) { stream->queue.buf_used = 0; - buf->state = UVC_BUF_STATE_DONE; + buf->state = UVC_BUF_STATE_READY; uvc_queue_next_buffer(&stream->queue, buf); stream->last_fid ^= UVC_STREAM_FID; } @@ -924,10 +922,8 @@ static int uvc_init_video_bulk(struct uvc_streaming *stream, static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags) { struct usb_interface *intf = stream->intf; - struct usb_host_interface *alts; - struct usb_host_endpoint *ep = NULL; - int intfnum = stream->intfnum; - unsigned int bandwidth, psize, i; + struct usb_host_endpoint *ep; + unsigned int i; int ret; stream->last_fid = -1; @@ -936,6 +932,12 @@ static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags) stream->bulk.payload_size = 0; if (intf->num_altsetting > 1) { + struct usb_host_endpoint *best_ep = NULL; + unsigned int best_psize = 3 * 1024; + unsigned int bandwidth; + unsigned int uninitialized_var(altsetting); + int intfnum = stream->intfnum; + /* Isochronous endpoint, select the alternate setting. */ bandwidth = stream->ctrl.dwMaxPayloadTransferSize; @@ -949,6 +951,9 @@ static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags) } for (i = 0; i < intf->num_altsetting; ++i) { + struct usb_host_interface *alts; + unsigned int psize; + alts = &intf->altsetting[i]; ep = uvc_find_endpoint(alts, stream->header.bEndpointAddress); @@ -958,21 +963,27 @@ static int uvc_init_video(struct uvc_streaming *stream, gfp_t gfp_flags) /* Check if the bandwidth is high enough. */ psize = le16_to_cpu(ep->desc.wMaxPacketSize); psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); - if (psize >= bandwidth) - break; + if (psize >= bandwidth && psize <= best_psize) { + altsetting = i; + best_psize = psize; + best_ep = ep; + } } - if (i >= intf->num_altsetting) { + if (best_ep == NULL) { uvc_trace(UVC_TRACE_VIDEO, "No fast enough alt setting " "for requested bandwidth.\n"); return -EIO; } - ret = usb_set_interface(stream->dev->udev, intfnum, i); + uvc_trace(UVC_TRACE_VIDEO, "Selecting alternate setting %u " + "(%u B/frame bandwidth).\n", altsetting, best_psize); + + ret = usb_set_interface(stream->dev->udev, intfnum, altsetting); if (ret < 0) return ret; - ret = uvc_init_video_isoc(stream, ep, gfp_flags); + ret = uvc_init_video_isoc(stream, best_ep, gfp_flags); } else { /* Bulk endpoint, proceed to URB initialization. */ ep = uvc_find_endpoint(&intf->altsetting[0], diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index 7ec9a04ced5..2337585001e 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -365,8 +365,9 @@ enum uvc_buffer_state { UVC_BUF_STATE_IDLE = 0, UVC_BUF_STATE_QUEUED = 1, UVC_BUF_STATE_ACTIVE = 2, - UVC_BUF_STATE_DONE = 3, - UVC_BUF_STATE_ERROR = 4, + UVC_BUF_STATE_READY = 3, + UVC_BUF_STATE_DONE = 4, + UVC_BUF_STATE_ERROR = 5, }; struct uvc_buffer { diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index ca2f2c4ff05..8f0d18409ed 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -11,9 +11,9 @@ obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o -obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o -obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o -obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o +obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o +obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o +obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o tmio_core.o obj-$(CONFIG_MFD_WM8400) += wm8400-core.o wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index e22128c3e9a..95c1e6bd172 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -80,6 +80,7 @@ struct asic3 { u16 irq_bothedge[4]; struct gpio_chip gpio; struct device *dev; + void __iomem *tmio_cnf; struct asic3_clk clocks[ARRAY_SIZE(asic3_clk_init)]; }; @@ -685,8 +686,24 @@ static struct mfd_cell asic3_cell_ds1wm = { .resources = ds1wm_resources, }; +static void asic3_mmc_pwr(struct platform_device *pdev, int state) +{ + struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); + + tmio_core_mmc_pwr(asic->tmio_cnf, 1 - asic->bus_shift, state); +} + +static void asic3_mmc_clk_div(struct platform_device *pdev, int state) +{ + struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); + + tmio_core_mmc_clk_div(asic->tmio_cnf, 1 - asic->bus_shift, state); +} + static struct tmio_mmc_data asic3_mmc_data = { - .hclk = 24576000, + .hclk = 24576000, + .set_pwr = asic3_mmc_pwr, + .set_clk_div = asic3_mmc_clk_div, }; static struct resource asic3_mmc_resources[] = { @@ -696,11 +713,6 @@ static struct resource asic3_mmc_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = ASIC3_SD_CONFIG_BASE, - .end = ASIC3_SD_CONFIG_BASE + 0x1ff, - .flags = IORESOURCE_MEM, - }, - { .start = 0, .end = 0, .flags = IORESOURCE_IRQ, @@ -743,6 +755,10 @@ static int asic3_mmc_enable(struct platform_device *pdev) asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF), ASIC3_SDHWCTRL_SDPWR, 1); + /* ASIC3_SD_CTRL_BASE assumes 32-bit addressing, TMIO is 16-bit */ + tmio_core_mmc_enable(asic->tmio_cnf, 1 - asic->bus_shift, + ASIC3_SD_CTRL_BASE >> 1); + return 0; } @@ -797,10 +813,15 @@ static int __init asic3_mfd_probe(struct platform_device *pdev, asic3_cell_ds1wm.data_size = sizeof(asic3_cell_ds1wm); /* MMC */ + asic->tmio_cnf = ioremap((ASIC3_SD_CONFIG_BASE >> asic->bus_shift) + + mem_sdio->start, 0x400 >> asic->bus_shift); + if (!asic->tmio_cnf) { + ret = -ENOMEM; + dev_dbg(asic->dev, "Couldn't ioremap SD_CONFIG\n"); + goto out; + } asic3_mmc_resources[0].start >>= asic->bus_shift; asic3_mmc_resources[0].end >>= asic->bus_shift; - asic3_mmc_resources[1].start >>= asic->bus_shift; - asic3_mmc_resources[1].end >>= asic->bus_shift; asic3_cell_mmc.platform_data = &asic3_cell_mmc; asic3_cell_mmc.data_size = sizeof(asic3_cell_mmc); @@ -820,7 +841,10 @@ static int __init asic3_mfd_probe(struct platform_device *pdev, static void asic3_mfd_remove(struct platform_device *pdev) { + struct asic3 *asic = platform_get_drvdata(pdev); + mfd_remove_devices(&pdev->dev); + iounmap(asic->tmio_cnf); } /* Core */ diff --git a/drivers/mfd/mc13783-core.c b/drivers/mfd/mc13783-core.c index a1ade2324ea..735c8a4d164 100644 --- a/drivers/mfd/mc13783-core.c +++ b/drivers/mfd/mc13783-core.c @@ -619,6 +619,8 @@ err_revision: } /* This should go away (END) */ + mc13783_unlock(mc13783); + if (pdata->flags & MC13783_USE_ADC) mc13783_add_subdevice(mc13783, "mc13783-adc"); @@ -641,8 +643,6 @@ err_revision: if (pdata->flags & MC13783_USE_TOUCHSCREEN) mc13783_add_subdevice(mc13783, "mc13783-ts"); - mc13783_unlock(mc13783); - return 0; } diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c index 0a255c1f1ce..bcf4687d4af 100644 --- a/drivers/mfd/t7l66xb.c +++ b/drivers/mfd/t7l66xb.c @@ -38,6 +38,19 @@ enum { T7L66XB_CELL_MMC, }; +static const struct resource t7l66xb_mmc_resources[] = { + { + .start = 0x800, + .end = 0x9ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_T7L66XB_MMC, + .end = IRQ_T7L66XB_MMC, + .flags = IORESOURCE_IRQ, + }, +}; + #define SCR_REVID 0x08 /* b Revision ID */ #define SCR_IMR 0x42 /* b Interrupt Mask */ #define SCR_DEV_CTL 0xe0 /* b Device control */ @@ -83,6 +96,9 @@ static int t7l66xb_mmc_enable(struct platform_device *mmc) spin_unlock_irqrestore(&t7l66xb->lock, flags); + tmio_core_mmc_enable(t7l66xb->scr + 0x200, 0, + t7l66xb_mmc_resources[0].start & 0xfffe); + return 0; } @@ -106,28 +122,28 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc) return 0; } +static void t7l66xb_mmc_pwr(struct platform_device *mmc, int state) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct t7l66xb *t7l66xb = platform_get_drvdata(dev); + + tmio_core_mmc_pwr(t7l66xb->scr + 0x200, 0, state); +} + +static void t7l66xb_mmc_clk_div(struct platform_device *mmc, int state) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct t7l66xb *t7l66xb = platform_get_drvdata(dev); + + tmio_core_mmc_clk_div(t7l66xb->scr + 0x200, 0, state); +} + /*--------------------------------------------------------------------------*/ static struct tmio_mmc_data t7166xb_mmc_data = { .hclk = 24000000, -}; - -static const struct resource t7l66xb_mmc_resources[] = { - { - .start = 0x800, - .end = 0x9ff, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x200, - .end = 0x2ff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_T7L66XB_MMC, - .end = IRQ_T7L66XB_MMC, - .flags = IORESOURCE_IRQ, - }, + .set_pwr = t7l66xb_mmc_pwr, + .set_clk_div = t7l66xb_mmc_clk_div, }; static const struct resource t7l66xb_nand_resources[] = { @@ -282,6 +298,9 @@ static int t7l66xb_resume(struct platform_device *dev) if (pdata && pdata->resume) pdata->resume(dev); + tmio_core_mmc_enable(t7l66xb->scr + 0x200, 0, + t7l66xb_mmc_resources[0].start & 0xfffe); + return 0; } #else diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c index 3280ab33f88..5c7f04343d5 100644 --- a/drivers/mfd/tc6387xb.c +++ b/drivers/mfd/tc6387xb.c @@ -22,28 +22,52 @@ enum { TC6387XB_CELL_MMC, }; +struct tc6387xb { + void __iomem *scr; + struct clk *clk32k; + struct resource rscr; +}; + +static struct resource tc6387xb_mmc_resources[] = { + { + .start = 0x800, + .end = 0x9ff, + .flags = IORESOURCE_MEM, + }, + { + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ, + }, +}; + +/*--------------------------------------------------------------------------*/ + #ifdef CONFIG_PM static int tc6387xb_suspend(struct platform_device *dev, pm_message_t state) { - struct clk *clk32k = platform_get_drvdata(dev); + struct tc6387xb *tc6387xb = platform_get_drvdata(dev); struct tc6387xb_platform_data *pdata = dev->dev.platform_data; if (pdata && pdata->suspend) pdata->suspend(dev); - clk_disable(clk32k); + clk_disable(tc6387xb->clk32k); return 0; } static int tc6387xb_resume(struct platform_device *dev) { - struct clk *clk32k = platform_get_drvdata(dev); + struct tc6387xb *tc6387xb = platform_get_drvdata(dev); struct tc6387xb_platform_data *pdata = dev->dev.platform_data; - clk_enable(clk32k); + clk_enable(tc6387xb->clk32k); if (pdata && pdata->resume) pdata->resume(dev); + tmio_core_mmc_resume(tc6387xb->scr + 0x200, 0, + tc6387xb_mmc_resources[0].start & 0xfffe); + return 0; } #else @@ -53,12 +77,32 @@ static int tc6387xb_resume(struct platform_device *dev) /*--------------------------------------------------------------------------*/ +static void tc6387xb_mmc_pwr(struct platform_device *mmc, int state) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct tc6387xb *tc6387xb = platform_get_drvdata(dev); + + tmio_core_mmc_pwr(tc6387xb->scr + 0x200, 0, state); +} + +static void tc6387xb_mmc_clk_div(struct platform_device *mmc, int state) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct tc6387xb *tc6387xb = platform_get_drvdata(dev); + + tmio_core_mmc_clk_div(tc6387xb->scr + 0x200, 0, state); +} + + static int tc6387xb_mmc_enable(struct platform_device *mmc) { struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct clk *clk32k = platform_get_drvdata(dev); + struct tc6387xb *tc6387xb = platform_get_drvdata(dev); - clk_enable(clk32k); + clk_enable(tc6387xb->clk32k); + + tmio_core_mmc_enable(tc6387xb->scr + 0x200, 0, + tc6387xb_mmc_resources[0].start & 0xfffe); return 0; } @@ -66,36 +110,20 @@ static int tc6387xb_mmc_enable(struct platform_device *mmc) static int tc6387xb_mmc_disable(struct platform_device *mmc) { struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct clk *clk32k = platform_get_drvdata(dev); + struct tc6387xb *tc6387xb = platform_get_drvdata(dev); - clk_disable(clk32k); + clk_disable(tc6387xb->clk32k); return 0; } -/*--------------------------------------------------------------------------*/ - static struct tmio_mmc_data tc6387xb_mmc_data = { .hclk = 24000000, + .set_pwr = tc6387xb_mmc_pwr, + .set_clk_div = tc6387xb_mmc_clk_div, }; -static struct resource tc6387xb_mmc_resources[] = { - { - .start = 0x800, - .end = 0x9ff, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x200, - .end = 0x2ff, - .flags = IORESOURCE_MEM, - }, - { - .start = 0, - .end = 0, - .flags = IORESOURCE_IRQ, - }, -}; +/*--------------------------------------------------------------------------*/ static struct mfd_cell tc6387xb_cells[] = { [TC6387XB_CELL_MMC] = { @@ -111,8 +139,9 @@ static struct mfd_cell tc6387xb_cells[] = { static int tc6387xb_probe(struct platform_device *dev) { struct tc6387xb_platform_data *pdata = dev->dev.platform_data; - struct resource *iomem; + struct resource *iomem, *rscr; struct clk *clk32k; + struct tc6387xb *tc6387xb; int irq, ret; iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); @@ -120,18 +149,40 @@ static int tc6387xb_probe(struct platform_device *dev) return -EINVAL; } + tc6387xb = kzalloc(sizeof *tc6387xb, GFP_KERNEL); + if (!tc6387xb) + return -ENOMEM; + ret = platform_get_irq(dev, 0); if (ret >= 0) irq = ret; else - goto err_resource; + goto err_no_irq; clk32k = clk_get(&dev->dev, "CLK_CK32K"); if (IS_ERR(clk32k)) { ret = PTR_ERR(clk32k); + goto err_no_clk; + } + + rscr = &tc6387xb->rscr; + rscr->name = "tc6387xb-core"; + rscr->start = iomem->start; + rscr->end = iomem->start + 0xff; + rscr->flags = IORESOURCE_MEM; + + ret = request_resource(iomem, rscr); + if (ret) goto err_resource; + + tc6387xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1); + if (!tc6387xb->scr) { + ret = -ENOMEM; + goto err_ioremap; } - platform_set_drvdata(dev, clk32k); + + tc6387xb->clk32k = clk32k; + platform_set_drvdata(dev, tc6387xb); if (pdata && pdata->enable) pdata->enable(dev); @@ -149,8 +200,13 @@ static int tc6387xb_probe(struct platform_device *dev) if (!ret) return 0; - clk_put(clk32k); +err_ioremap: + release_resource(&tc6387xb->rscr); err_resource: + clk_put(clk32k); +err_no_clk: +err_no_irq: + kfree(tc6387xb); return ret; } @@ -195,3 +251,4 @@ MODULE_DESCRIPTION("Toshiba TC6387XB core driver"); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Ian Molton"); MODULE_ALIAS("platform:tc6387xb"); + diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c index 1429a7341a9..4bc5a08a2b0 100644 --- a/drivers/mfd/tc6393xb.c +++ b/drivers/mfd/tc6393xb.c @@ -136,10 +136,6 @@ static int tc6393xb_nand_enable(struct platform_device *nand) return 0; } -static struct tmio_mmc_data tc6393xb_mmc_data = { - .hclk = 24000000, -}; - static struct resource __devinitdata tc6393xb_nand_resources[] = { { .start = 0x1000, @@ -165,11 +161,6 @@ static struct resource __devinitdata tc6393xb_mmc_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = 0x200, - .end = 0x2ff, - .flags = IORESOURCE_MEM, - }, - { .start = IRQ_TC6393_MMC, .end = IRQ_TC6393_MMC, .flags = IORESOURCE_IRQ, @@ -346,6 +337,50 @@ int tc6393xb_lcd_mode(struct platform_device *fb, } EXPORT_SYMBOL(tc6393xb_lcd_mode); +static int tc6393xb_mmc_enable(struct platform_device *mmc) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + + tmio_core_mmc_enable(tc6393xb->scr + 0x200, 0, + tc6393xb_mmc_resources[0].start & 0xfffe); + + return 0; +} + +static int tc6393xb_mmc_resume(struct platform_device *mmc) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + + tmio_core_mmc_resume(tc6393xb->scr + 0x200, 0, + tc6393xb_mmc_resources[0].start & 0xfffe); + + return 0; +} + +static void tc6393xb_mmc_pwr(struct platform_device *mmc, int state) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + + tmio_core_mmc_pwr(tc6393xb->scr + 0x200, 0, state); +} + +static void tc6393xb_mmc_clk_div(struct platform_device *mmc, int state) +{ + struct platform_device *dev = to_platform_device(mmc->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + + tmio_core_mmc_clk_div(tc6393xb->scr + 0x200, 0, state); +} + +static struct tmio_mmc_data tc6393xb_mmc_data = { + .hclk = 24000000, + .set_pwr = tc6393xb_mmc_pwr, + .set_clk_div = tc6393xb_mmc_clk_div, +}; + static struct mfd_cell __devinitdata tc6393xb_cells[] = { [TC6393XB_CELL_NAND] = { .name = "tmio-nand", @@ -355,6 +390,8 @@ static struct mfd_cell __devinitdata tc6393xb_cells[] = { }, [TC6393XB_CELL_MMC] = { .name = "tmio-mmc", + .enable = tc6393xb_mmc_enable, + .resume = tc6393xb_mmc_resume, .driver_data = &tc6393xb_mmc_data, .num_resources = ARRAY_SIZE(tc6393xb_mmc_resources), .resources = tc6393xb_mmc_resources, @@ -836,3 +873,4 @@ MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov and Dirk Opfer"); MODULE_DESCRIPTION("tc6393xb Toshiba Mobile IO Controller"); MODULE_ALIAS("platform:tc6393xb"); + diff --git a/drivers/mfd/tmio_core.c b/drivers/mfd/tmio_core.c new file mode 100644 index 00000000000..eddc19ae464 --- /dev/null +++ b/drivers/mfd/tmio_core.c @@ -0,0 +1,52 @@ +/* + * Copyright(c) 2009 Ian Molton <spyro@f2s.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mfd/tmio.h> + +int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base) +{ + /* Enable the MMC/SD Control registers */ + sd_config_write16(cnf, shift, CNF_CMD, SDCREN); + sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe); + + /* Disable SD power during suspend */ + sd_config_write8(cnf, shift, CNF_PWR_CTL_3, 0x01); + + /* The below is required but why? FIXME */ + sd_config_write8(cnf, shift, CNF_STOP_CLK_CTL, 0x1f); + + /* Power down SD bus */ + sd_config_write8(cnf, shift, CNF_PWR_CTL_2, 0x00); + + return 0; +} +EXPORT_SYMBOL(tmio_core_mmc_enable); + +int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base) +{ + + /* Enable the MMC/SD Control registers */ + sd_config_write16(cnf, shift, CNF_CMD, SDCREN); + sd_config_write32(cnf, shift, CNF_CTL_BASE, base & 0xfffe); + + return 0; +} +EXPORT_SYMBOL(tmio_core_mmc_resume); + +void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state) +{ + sd_config_write8(cnf, shift, CNF_PWR_CTL_2, state ? 0x02 : 0x00); +} +EXPORT_SYMBOL(tmio_core_mmc_pwr); + +void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state) +{ + sd_config_write8(cnf, shift, CNF_SD_CLK_MODE, state ? 1 : 0); +} +EXPORT_SYMBOL(tmio_core_mmc_clk_div); + diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 8485a701806..9a970bd6877 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -134,8 +134,7 @@ static inline int is_reg_locked(struct wm8350 *wm8350, u8 reg) wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY) return 0; - if ((reg == WM8350_GPIO_CONFIGURATION_I_O) || - (reg >= WM8350_GPIO_FUNCTION_SELECT_1 && + if ((reg >= WM8350_GPIO_FUNCTION_SELECT_1 && reg <= WM8350_GPIO_FUNCTION_SELECT_4) || (reg >= WM8350_BATTERY_CHARGER_CONTROL_1 && reg <= WM8350_BATTERY_CHARGER_CONTROL_3)) diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c index c8df547c474..9025f29e270 100644 --- a/drivers/mfd/wm8350-irq.c +++ b/drivers/mfd/wm8350-irq.c @@ -434,7 +434,7 @@ int wm8350_register_irq(struct wm8350 *wm8350, int irq, irq_handler_t handler, unsigned long flags, const char *name, void *data) { - if (irq < 0 || irq > WM8350_NUM_IRQ || !handler) + if (irq < 0 || irq >= WM8350_NUM_IRQ || !handler) return -EINVAL; if (wm8350->irq[irq].handler) @@ -453,7 +453,7 @@ EXPORT_SYMBOL_GPL(wm8350_register_irq); int wm8350_free_irq(struct wm8350 *wm8350, int irq) { - if (irq < 0 || irq > WM8350_NUM_IRQ) + if (irq < 0 || irq >= WM8350_NUM_IRQ) return -EINVAL; wm8350_mask_irq(wm8350, irq); diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index 7cccc852374..e22c3fa3516 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -46,7 +46,9 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock) clk |= 0x100; } - sd_config_write8(host, CNF_SD_CLK_MODE, clk >> 22); + if (host->set_clk_div) + host->set_clk_div(host->pdev, (clk>>22) & 1); + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff); } @@ -427,12 +429,13 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* Power sequence - OFF -> ON -> UP */ switch (ios->power_mode) { case MMC_POWER_OFF: /* power down SD bus */ - sd_config_write8(host, CNF_PWR_CTL_2, 0x00); + if (host->set_pwr) + host->set_pwr(host->pdev, 0); tmio_mmc_clk_stop(host); break; case MMC_POWER_ON: /* power up SD bus */ - - sd_config_write8(host, CNF_PWR_CTL_2, 0x02); + if (host->set_pwr) + host->set_pwr(host->pdev, 1); break; case MMC_POWER_UP: /* start bus clock */ tmio_mmc_clk_start(host); @@ -485,21 +488,15 @@ static int tmio_mmc_resume(struct platform_device *dev) { struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; struct mmc_host *mmc = platform_get_drvdata(dev); - struct tmio_mmc_host *host = mmc_priv(mmc); int ret = 0; /* Tell the MFD core we are ready to be enabled */ - if (cell->enable) { - ret = cell->enable(dev); + if (cell->resume) { + ret = cell->resume(dev); if (ret) goto out; } - /* Enable the MMC/SD Control registers */ - sd_config_write16(host, CNF_CMD, SDCREN); - sd_config_write32(host, CNF_CTL_BASE, - (dev->resource[0].start >> host->bus_shift) & 0xfffe); - mmc_resume_host(mmc); out: @@ -514,17 +511,16 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) { struct mfd_cell *cell = (struct mfd_cell *)dev->dev.platform_data; struct tmio_mmc_data *pdata; - struct resource *res_ctl, *res_cnf; + struct resource *res_ctl; struct tmio_mmc_host *host; struct mmc_host *mmc; int ret = -EINVAL; - if (dev->num_resources != 3) + if (dev->num_resources != 2) goto out; res_ctl = platform_get_resource(dev, IORESOURCE_MEM, 0); - res_cnf = platform_get_resource(dev, IORESOURCE_MEM, 1); - if (!res_ctl || !res_cnf) + if (!res_ctl) goto out; pdata = cell->driver_data; @@ -539,8 +535,12 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) host = mmc_priv(mmc); host->mmc = mmc; + host->pdev = dev; platform_set_drvdata(dev, mmc); + host->set_pwr = pdata->set_pwr; + host->set_clk_div = pdata->set_clk_div; + /* SD control register space size is 0x200, 0x400 for bus_shift=1 */ host->bus_shift = resource_size(res_ctl) >> 10; @@ -548,10 +548,6 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) if (!host->ctl) goto host_free; - host->cnf = ioremap(res_cnf->start, resource_size(res_cnf)); - if (!host->cnf) - goto unmap_ctl; - mmc->ops = &tmio_mmc_ops; mmc->caps = MMC_CAP_4_BIT_DATA; mmc->f_max = pdata->hclk; @@ -562,23 +558,9 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) if (cell->enable) { ret = cell->enable(dev); if (ret) - goto unmap_cnf; + goto unmap_ctl; } - /* Enable the MMC/SD Control registers */ - sd_config_write16(host, CNF_CMD, SDCREN); - sd_config_write32(host, CNF_CTL_BASE, - (dev->resource[0].start >> host->bus_shift) & 0xfffe); - - /* Disable SD power during suspend */ - sd_config_write8(host, CNF_PWR_CTL_3, 0x01); - - /* The below is required but why? FIXME */ - sd_config_write8(host, CNF_STOP_CLK_CTL, 0x1f); - - /* Power down SD bus*/ - sd_config_write8(host, CNF_PWR_CTL_2, 0x00); - tmio_mmc_clk_stop(host); reset(host); @@ -586,14 +568,14 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) if (ret >= 0) host->irq = ret; else - goto unmap_cnf; + goto unmap_ctl; disable_mmc_irqs(host, TMIO_MASK_ALL); ret = request_irq(host->irq, tmio_mmc_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING, dev_name(&dev->dev), host); if (ret) - goto unmap_cnf; + goto unmap_ctl; mmc_add_host(mmc); @@ -605,8 +587,6 @@ static int __devinit tmio_mmc_probe(struct platform_device *dev) return 0; -unmap_cnf: - iounmap(host->cnf); unmap_ctl: iounmap(host->ctl); host_free: @@ -626,7 +606,6 @@ static int __devexit tmio_mmc_remove(struct platform_device *dev) mmc_remove_host(mmc); free_irq(host->irq, host); iounmap(host->ctl); - iounmap(host->cnf); mmc_free_host(mmc); } diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index 9fa99859497..692dc23363b 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -11,26 +11,6 @@ #include <linux/highmem.h> -#define CNF_CMD 0x04 -#define CNF_CTL_BASE 0x10 -#define CNF_INT_PIN 0x3d -#define CNF_STOP_CLK_CTL 0x40 -#define CNF_GCLK_CTL 0x41 -#define CNF_SD_CLK_MODE 0x42 -#define CNF_PIN_STATUS 0x44 -#define CNF_PWR_CTL_1 0x48 -#define CNF_PWR_CTL_2 0x49 -#define CNF_PWR_CTL_3 0x4a -#define CNF_CARD_DETECT_MODE 0x4c -#define CNF_SD_SLOT 0x50 -#define CNF_EXT_GCLK_CTL_1 0xf0 -#define CNF_EXT_GCLK_CTL_2 0xf1 -#define CNF_EXT_GCLK_CTL_3 0xf9 -#define CNF_SD_LED_EN_1 0xfa -#define CNF_SD_LED_EN_2 0xfe - -#define SDCREN 0x2 /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/ - #define CTL_SD_CMD 0x00 #define CTL_ARG_REG 0x04 #define CTL_STOP_INTERNAL_ACTION 0x08 @@ -110,7 +90,6 @@ struct tmio_mmc_host { - void __iomem *cnf; void __iomem *ctl; unsigned long bus_shift; struct mmc_command *cmd; @@ -119,10 +98,16 @@ struct tmio_mmc_host { struct mmc_host *mmc; int irq; + /* Callbacks for clock / power control */ + void (*set_pwr)(struct platform_device *host, int state); + void (*set_clk_div)(struct platform_device *host, int state); + /* pio related stuff */ struct scatterlist *sg_ptr; unsigned int sg_len; unsigned int sg_off; + + struct platform_device *pdev; }; #include <linux/io.h> @@ -163,25 +148,6 @@ static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift)); } -static inline void sd_config_write8(struct tmio_mmc_host *host, int addr, - u8 val) -{ - writeb(val, host->cnf + (addr << host->bus_shift)); -} - -static inline void sd_config_write16(struct tmio_mmc_host *host, int addr, - u16 val) -{ - writew(val, host->cnf + (addr << host->bus_shift)); -} - -static inline void sd_config_write32(struct tmio_mmc_host *host, int addr, - u32 val) -{ - writew(val, host->cnf + (addr << host->bus_shift)); - writew(val >> 16, host->cnf + ((addr + 2) << host->bus_shift)); -} - #include <linux/scatterlist.h> #include <linux/blkdev.h> diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c index 36ede02ceac..b5496a19d96 100644 --- a/drivers/serial/8250_pnp.c +++ b/drivers/serial/8250_pnp.c @@ -354,6 +354,8 @@ static const struct pnp_device_id pnp_dev_table[] = { { "FUJ02E5", 0 }, /* Fujitsu P-series tablet PC device */ { "FUJ02E6", 0 }, + /* Fujitsu Wacom 2FGT Tablet PC device */ + { "FUJ02E7", 0 }, /* * LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in * disguise) diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c index 0700cd10b97..683e66f18e8 100644 --- a/drivers/serial/pmac_zilog.c +++ b/drivers/serial/pmac_zilog.c @@ -411,6 +411,17 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap) goto ack_tx_int; } + /* Under some circumstances, we see interrupts reported for + * a closed channel. The interrupt mask in R1 is clear, but + * R3 still signals the interrupts and we see them when taking + * an interrupt for the other channel (this could be a qemu + * bug but since the ESCC doc doesn't specify precsiely whether + * R3 interrup status bits are masked by R1 interrupt enable + * bits, better safe than sorry). --BenH. + */ + if (!ZS_IS_OPEN(uap)) + goto ack_tx_int; + if (uap->port.x_char) { uap->flags |= PMACZILOG_FLAG_TX_ACTIVE; write_zsdata(uap, uap->port.x_char); diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 37f0de9dd9c..42f3333c4ad 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1052,7 +1052,18 @@ static void __devinit sci_init_single(struct platform_device *dev, sci_port->port.ops = &sci_uart_ops; sci_port->port.iotype = UPIO_MEM; sci_port->port.line = index; - sci_port->port.fifosize = 1; + + switch (p->type) { + case PORT_SCIFA: + sci_port->port.fifosize = 64; + break; + case PORT_SCIF: + sci_port->port.fifosize = 16; + break; + default: + sci_port->port.fifosize = 1; + break; + } if (dev) { sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL; diff --git a/drivers/staging/cx25821/cx25821-medusa-video.c b/drivers/staging/cx25821/cx25821-medusa-video.c index e4df8134f05..1eb079b3d42 100644 --- a/drivers/staging/cx25821/cx25821-medusa-video.c +++ b/drivers/staging/cx25821/cx25821-medusa-video.c @@ -860,10 +860,8 @@ int medusa_video_init(struct cx25821_dev *dev) ret_val = medusa_set_videostandard(dev); - if (ret_val < 0) { - mutex_unlock(&dev->lock); + if (ret_val < 0) return -EINVAL; - } return 1; } diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c index adf9632c6b1..53cb722c45a 100644 --- a/drivers/video/s3c-fb.c +++ b/drivers/video/s3c-fb.c @@ -211,21 +211,23 @@ static int s3c_fb_check_var(struct fb_var_screeninfo *var, /** * s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock. - * @id: window id. * @sfb: The hardware state. * @pixclock: The pixel clock wanted, in picoseconds. * * Given the specified pixel clock, work out the necessary divider to get * close to the output frequency. */ -static int s3c_fb_calc_pixclk(unsigned char id, struct s3c_fb *sfb, unsigned int pixclk) +static int s3c_fb_calc_pixclk(struct s3c_fb *sfb, unsigned int pixclk) { - struct s3c_fb_pd_win *win = sfb->pdata->win[id]; unsigned long clk = clk_get_rate(sfb->bus_clk); + unsigned long long tmp; unsigned int result; - pixclk *= win->win_mode.refresh; - result = clk / pixclk; + tmp = (unsigned long long)clk; + tmp *= pixclk; + + do_div(tmp, 1000000000UL); + result = (unsigned int)tmp / 1000; dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n", pixclk, clk, result, clk / result); @@ -301,7 +303,7 @@ static int s3c_fb_set_par(struct fb_info *info) /* use window 0 as the basis for the lcd output timings */ if (win_no == 0) { - clkdiv = s3c_fb_calc_pixclk(win_no, sfb, var->pixclock); + clkdiv = s3c_fb_calc_pixclk(sfb, var->pixclock); data = sfb->pdata->vidcon0; data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR); diff --git a/drivers/video/via/accel.c b/drivers/video/via/accel.c index 9d4f3a49ba4..d5077dfa9e0 100644 --- a/drivers/video/via/accel.c +++ b/drivers/video/via/accel.c @@ -137,7 +137,7 @@ static int hw_bitblt_1(void __iomem *engine, u8 op, u32 width, u32 height, tmp, dst_pitch); return -EINVAL; } - tmp = (tmp >> 3) | (dst_pitch << (16 - 3)); + tmp = VIA_PITCH_ENABLE | (tmp >> 3) | (dst_pitch << (16 - 3)); writel(tmp, engine + 0x38); if (op == VIA_BITBLT_FILL) @@ -352,6 +352,9 @@ int viafb_init_engine(struct fb_info *info) viapar->shared->vq_vram_addr = viapar->fbmem_free; viapar->fbmem_used += VQ_SIZE; + /* Init 2D engine reg to reset 2D engine */ + writel(0x0, engine + VIA_REG_KEYCONTROL); + /* Init AGP and VQ regs */ switch (chip_name) { case UNICHROME_K8M890: diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c index d8df17a7d5f..3028e7ddc3b 100644 --- a/drivers/video/via/viafbdev.c +++ b/drivers/video/via/viafbdev.c @@ -177,16 +177,15 @@ static int viafb_set_par(struct fb_info *info) } if (vmode_index != VIA_RES_INVALID) { - viafb_setmode(vmode_index, info->var.xres, info->var.yres, - info->var.bits_per_pixel, vmode_index1, - viafb_second_xres, viafb_second_yres, viafb_bpp1); - viafb_update_fix(info); viafb_bpp = info->var.bits_per_pixel; if (info->var.accel_flags & FB_ACCELF_TEXT) info->flags &= ~FBINFO_HWACCEL_DISABLED; else info->flags |= FBINFO_HWACCEL_DISABLED; + viafb_setmode(vmode_index, info->var.xres, info->var.yres, + info->var.bits_per_pixel, vmode_index1, + viafb_second_xres, viafb_second_yres, viafb_bpp1); } return 0; @@ -872,7 +871,9 @@ static int viafb_cursor(struct fb_info *info, struct fb_cursor *cursor) if (info->flags & FBINFO_HWACCEL_DISABLED || info != viafbinfo) return -ENODEV; - if (chip_name == UNICHROME_CLE266 && viapar->iga_path == IGA2) + /* LCD ouput does not support hw cursors (at least on VN896) */ + if ((chip_name == UNICHROME_CLE266 && viapar->iga_path == IGA2) || + viafb_LCD_ON) return -ENODEV; viafb_show_hw_cursor(info, HW_Cursor_OFF); diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 9dd58804288..505be88c82a 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -266,7 +266,7 @@ static void __devexit virtballoon_remove(struct virtio_device *vdev) static unsigned int features[] = { VIRTIO_BALLOON_F_MUST_TELL_HOST }; -static struct virtio_driver virtio_balloon = { +static struct virtio_driver virtio_balloon_driver = { .feature_table = features, .feature_table_size = ARRAY_SIZE(features), .driver.name = KBUILD_MODNAME, @@ -279,12 +279,12 @@ static struct virtio_driver virtio_balloon = { static int __init init(void) { - return register_virtio_driver(&virtio_balloon); + return register_virtio_driver(&virtio_balloon_driver); } static void __exit fini(void) { - unregister_virtio_driver(&virtio_balloon); + unregister_virtio_driver(&virtio_balloon_driver); } module_init(init); module_exit(fini); diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index c8a3bec2683..4bdb7f1a907 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -29,8 +29,9 @@ * document number 313056-003, 313057-017: 82801H (ICH8) * document number 316972-004, 316973-012: 82801I (ICH9) * document number 319973-002, 319974-002: 82801J (ICH10) - * document number 322169-001, 322170-001: 5 Series, 3400 Series (PCH) + * document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH) * document number 320066-003, 320257-008: EP80597 (IICH) + * document number TBD : Cougar Point (CPT) */ /* @@ -100,8 +101,22 @@ enum iTCO_chipsets { TCO_ICH10DO, /* ICH10DO */ TCO_PCH, /* PCH Desktop Full Featured */ TCO_PCHM, /* PCH Mobile Full Featured */ + TCO_P55, /* P55 */ + TCO_PM55, /* PM55 */ + TCO_H55, /* H55 */ + TCO_QM57, /* QM57 */ + TCO_H57, /* H57 */ + TCO_HM55, /* HM55 */ + TCO_Q57, /* Q57 */ + TCO_HM57, /* HM57 */ TCO_PCHMSFF, /* PCH Mobile SFF Full Featured */ + TCO_QS57, /* QS57 */ + TCO_3400, /* 3400 */ + TCO_3420, /* 3420 */ + TCO_3450, /* 3450 */ TCO_EP80579, /* EP80579 */ + TCO_CPTD, /* CPT Desktop */ + TCO_CPTM, /* CPT Mobile */ }; static struct { @@ -144,8 +159,22 @@ static struct { {"ICH10DO", 2}, {"PCH Desktop Full Featured", 2}, {"PCH Mobile Full Featured", 2}, + {"P55", 2}, + {"PM55", 2}, + {"H55", 2}, + {"QM57", 2}, + {"H57", 2}, + {"HM55", 2}, + {"Q57", 2}, + {"HM57", 2}, {"PCH Mobile SFF Full Featured", 2}, + {"QS57", 2}, + {"3400", 2}, + {"3420", 2}, + {"3450", 2}, {"EP80579", 2}, + {"CPT Desktop", 2}, + {"CPT Mobile", 2}, {NULL, 0} }; @@ -216,8 +245,22 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(0x3a14, TCO_ICH10DO)}, { ITCO_PCI_DEVICE(0x3b00, TCO_PCH)}, { ITCO_PCI_DEVICE(0x3b01, TCO_PCHM)}, + { ITCO_PCI_DEVICE(0x3b02, TCO_P55)}, + { ITCO_PCI_DEVICE(0x3b03, TCO_PM55)}, + { ITCO_PCI_DEVICE(0x3b06, TCO_H55)}, + { ITCO_PCI_DEVICE(0x3b07, TCO_QM57)}, + { ITCO_PCI_DEVICE(0x3b08, TCO_H57)}, + { ITCO_PCI_DEVICE(0x3b09, TCO_HM55)}, + { ITCO_PCI_DEVICE(0x3b0a, TCO_Q57)}, + { ITCO_PCI_DEVICE(0x3b0b, TCO_HM57)}, { ITCO_PCI_DEVICE(0x3b0d, TCO_PCHMSFF)}, + { ITCO_PCI_DEVICE(0x3b0f, TCO_QS57)}, + { ITCO_PCI_DEVICE(0x3b12, TCO_3400)}, + { ITCO_PCI_DEVICE(0x3b14, TCO_3420)}, + { ITCO_PCI_DEVICE(0x3b16, TCO_3450)}, { ITCO_PCI_DEVICE(0x5031, TCO_EP80579)}, + { ITCO_PCI_DEVICE(0x1c42, TCO_CPTD)}, + { ITCO_PCI_DEVICE(0x1c43, TCO_CPTM)}, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); |