diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/media/video/Makefile | 5 | ||||
-rw-r--r-- | drivers/media/video/bttv-cards.c | 3 | ||||
-rw-r--r-- | drivers/media/video/bttv-driver.c | 13 | ||||
-rw-r--r-- | drivers/media/video/bttv-gpio.c | 18 | ||||
-rw-r--r-- | drivers/media/video/bttv-input.c (renamed from drivers/media/video/ir-kbd-gpio.c) | 254 | ||||
-rw-r--r-- | drivers/media/video/bttv.h | 36 | ||||
-rw-r--r-- | drivers/media/video/bttvp.h | 6 |
7 files changed, 136 insertions, 199 deletions
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 618a08ab940..49aae8a54aa 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -3,7 +3,8 @@ # bttv-objs := bttv-driver.o bttv-cards.o bttv-if.o \ - bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o + bttv-risc.o bttv-vbi.o bttv-i2c.o bttv-gpio.o \ + bttv-input.o zoran-objs := zr36120.o zr36120_i2c.o zr36120_mem.o zr36067-objs := zoran_procfs.o zoran_device.o \ zoran_driver.o zoran_card.o @@ -12,7 +13,7 @@ tuner-objs := tuner-core.o tuner-simple.o mt20xx.o tda8290.o tea5767.o obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o compat_ioctl32.o obj-$(CONFIG_VIDEO_BT848) += bttv.o msp3400.o tvaudio.o \ - tda7432.o tda9875.o ir-kbd-i2c.o ir-kbd-gpio.o + tda7432.o tda9875.o ir-kbd-i2c.o obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o obj-$(CONFIG_VIDEO_ZR36120) += zoran.o diff --git a/drivers/media/video/bttv-cards.c b/drivers/media/video/bttv-cards.c index c94092351b7..440f635e020 100644 --- a/drivers/media/video/bttv-cards.c +++ b/drivers/media/video/bttv-cards.c @@ -2139,7 +2139,6 @@ struct tvcard bttv_tvcards[] = { .has_remote = 1, .gpiomask = 0x1b, .no_gpioirq = 1, - .any_irq = 1, }, [BTTV_BOARD_PV143] = { /* Jorge Boncompte - DTI2 <jorge@dti2.net> */ @@ -3412,8 +3411,6 @@ void __devinit bttv_init_card2(struct bttv *btv) btv->has_remote=1; if (!bttv_tvcards[btv->c.type].no_gpioirq) btv->gpioirq=1; - if (bttv_tvcards[btv->c.type].any_irq) - btv->any_irq = 1; if (bttv_tvcards[btv->c.type].audio_hook) btv->audio_hook=bttv_tvcards[btv->c.type].audio_hook; diff --git a/drivers/media/video/bttv-driver.c b/drivers/media/video/bttv-driver.c index 47347674a5e..8bee7d5796d 100644 --- a/drivers/media/video/bttv-driver.c +++ b/drivers/media/video/bttv-driver.c @@ -3702,8 +3702,8 @@ static irqreturn_t bttv_irq(int irq, void *dev_id, struct pt_regs * regs) btv=(struct bttv *)dev_id; - if (btv->any_irq) - handled = bttv_any_irq(&btv->c); + if (btv->custom_irq) + handled = btv->custom_irq(btv); count=0; while (1) { @@ -3739,9 +3739,9 @@ static irqreturn_t bttv_irq(int irq, void *dev_id, struct pt_regs * regs) if (astat&BT848_INT_VSYNC) btv->field_count++; - if (astat & BT848_INT_GPINT) { + if ((astat & BT848_INT_GPINT) && btv->remote) { wake_up(&btv->gpioq); - bttv_gpio_irq(&btv->c); + bttv_input_irq(btv); } if (astat & BT848_INT_I2CDONE) { @@ -4070,6 +4070,8 @@ static int __devinit bttv_probe(struct pci_dev *dev, if (bttv_tvcards[btv->c.type].has_dvb) bttv_sub_add_device(&btv->c, "dvb"); + bttv_input_init(btv); + /* everything is fine */ bttv_num++; return 0; @@ -4104,7 +4106,8 @@ static void __devexit bttv_remove(struct pci_dev *pci_dev) /* tell gpio modules we are leaving ... */ btv->shutdown=1; wake_up(&btv->gpioq); - bttv_sub_del_devices(&btv->c); + bttv_input_fini(btv); + //bttv_sub_del_devices(&btv->c); /* unregister i2c_bus + input */ fini_bttv_i2c(btv); diff --git a/drivers/media/video/bttv-gpio.c b/drivers/media/video/bttv-gpio.c index 616a5b7e510..575ce8b8e71 100644 --- a/drivers/media/video/bttv-gpio.c +++ b/drivers/media/video/bttv-gpio.c @@ -113,24 +113,6 @@ void bttv_gpio_irq(struct bttv_core *core) } } -int bttv_any_irq(struct bttv_core *core) -{ - struct bttv_sub_driver *drv; - struct bttv_sub_device *dev; - struct list_head *item; - int handled = 0; - - list_for_each(item,&core->subs) { - dev = list_entry(item,struct bttv_sub_device,list); - drv = to_bttv_sub_drv(dev->dev.driver); - if (drv && drv->any_irq) { - if (drv->any_irq(dev)) - handled = 1; - } - } - return handled; -} - /* ----------------------------------------------------------------------- */ /* external: sub-driver register/unregister */ diff --git a/drivers/media/video/ir-kbd-gpio.c b/drivers/media/video/bttv-input.c index 556da9ff128..5027e10537c 100644 --- a/drivers/media/video/ir-kbd-gpio.c +++ b/drivers/media/video/bttv-input.c @@ -24,10 +24,9 @@ #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/input.h> -#include <linux/pci.h> #include "bttv.h" -#include <media/ir-common.h> +#include "bttvp.h" /* ---------------------------------------------------------------------- */ @@ -155,9 +154,6 @@ static IR_KEYTAB_TYPE ir_codes_apac_viewcomp[IR_KEYTAB_SIZE] = { /* ---------------------------------------------------------------------- */ -/* Ricardo Cerqueira <v4l@cerqueira.org> */ -/* Weird matching, since the remote has "uncommon" keys */ - static IR_KEYTAB_TYPE ir_codes_conceptronic[IR_KEYTAB_SIZE] = { [ 30 ] = KEY_POWER, // power @@ -278,34 +274,6 @@ static IR_KEYTAB_TYPE ir_codes_nebula[IR_KEYTAB_SIZE] = { [0x36] = KEY_PC }; -struct IR { - struct bttv_sub_device *sub; - struct input_dev *input; - struct ir_input_state ir; - char name[32]; - char phys[32]; - - /* Usual gpio signalling */ - - u32 mask_keycode; - u32 mask_keydown; - u32 mask_keyup; - u32 polling; - u32 last_gpio; - struct work_struct work; - struct timer_list timer; - - /* RC5 gpio */ - u32 rc5_gpio; - struct timer_list timer_end; /* timer_end for code completion */ - struct timer_list timer_keyup; /* timer_end for key release */ - u32 last_rc5; /* last good rc5 code */ - u32 last_bit; /* last raw bit seen */ - u32 code; /* raw code under construction */ - struct timeval base_time; /* time of last seen code */ - int active; /* building raw code */ -}; - static int debug; module_param(debug, int, 0644); /* debug level (0,1,2) */ static int repeat_delay = 500; @@ -313,31 +281,17 @@ module_param(repeat_delay, int, 0644); static int repeat_period = 33; module_param(repeat_period, int, 0644); -#define DEVNAME "ir-kbd-gpio" -#define dprintk(fmt, arg...) if (debug) \ - printk(KERN_DEBUG DEVNAME ": " fmt , ## arg) - -static void ir_irq(struct bttv_sub_device *sub); -static int ir_probe(struct device *dev); -static int ir_remove(struct device *dev); - -static struct bttv_sub_driver driver = { - .drv = { - .name = DEVNAME, - .probe = ir_probe, - .remove = ir_remove, - }, - .gpio_irq = ir_irq, -}; +#define DEVNAME "bttv-input" /* ---------------------------------------------------------------------- */ -static void ir_handle_key(struct IR *ir) +static void ir_handle_key(struct bttv *btv) { + struct bttv_ir *ir = btv->remote; u32 gpio,data; /* read gpio value */ - gpio = bttv_gpio_read(ir->sub->core); + gpio = bttv_gpio_read(&btv->c); if (ir->polling) { if (ir->last_gpio == gpio) return; @@ -346,56 +300,36 @@ static void ir_handle_key(struct IR *ir) /* extract data */ data = ir_extract_bits(gpio, ir->mask_keycode); - dprintk(DEVNAME ": irq gpio=0x%x code=%d | %s%s%s\n", + dprintk(KERN_INFO DEVNAME ": irq gpio=0x%x code=%d | %s%s%s\n", gpio, data, ir->polling ? "poll" : "irq", (gpio & ir->mask_keydown) ? " down" : "", (gpio & ir->mask_keyup) ? " up" : ""); - if (ir->mask_keydown) { - /* bit set on keydown */ - if (gpio & ir->mask_keydown) { - ir_input_keydown(ir->input, &ir->ir, data, data); - } else { - ir_input_nokey(ir->input, &ir->ir); - } - - } else if (ir->mask_keyup) { - /* bit cleared on keydown */ - if (0 == (gpio & ir->mask_keyup)) { - ir_input_keydown(ir->input, &ir->ir, data, data); - } else { - ir_input_nokey(ir->input, &ir->ir); - } - + if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) || + (ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) { + ir_input_keydown(ir->dev,&ir->ir,data,data); } else { - /* can't disturgissh keydown/up :-/ */ - ir_input_keydown(ir->input, &ir->ir, data, data); - ir_input_nokey(ir->input, &ir->ir); + ir_input_nokey(ir->dev,&ir->ir); } -} -static void ir_irq(struct bttv_sub_device *sub) -{ - struct IR *ir = dev_get_drvdata(&sub->dev); - - if (!ir->polling) - ir_handle_key(ir); } -static void ir_timer(unsigned long data) +void bttv_input_irq(struct bttv *btv) { - struct IR *ir = (struct IR*)data; + struct bttv_ir *ir = btv->remote; - schedule_work(&ir->work); + if (!ir->polling) + ir_handle_key(btv); } -static void ir_work(void *data) +static void bttv_input_timer(unsigned long data) { - struct IR *ir = data; + struct bttv *btv = (struct bttv*)data; + struct bttv_ir *ir = btv->remote; unsigned long timeout; - ir_handle_key(ir); + ir_handle_key(btv); timeout = jiffies + (ir->polling * HZ / 1000); mod_timer(&ir->timer, timeout); } @@ -434,26 +368,26 @@ static u32 rc5_decode(unsigned int code) rc5 |= 1; break; case 3: - dprintk("bad code: %x\n", org_code); + dprintk(KERN_WARNING "bad code: %x\n", org_code); return 0; } } - dprintk("code=%x, rc5=%x, start=%x, toggle=%x, address=%x, " + dprintk(KERN_WARNING "code=%x, rc5=%x, start=%x, toggle=%x, address=%x, " "instr=%x\n", rc5, org_code, RC5_START(rc5), RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5)); return rc5; } -static int ir_rc5_irq(struct bttv_sub_device *sub) +static int bttv_rc5_irq(struct bttv *btv) { - struct IR *ir = dev_get_drvdata(&sub->dev); + struct bttv_ir *ir = btv->remote; struct timeval tv; u32 gpio; u32 gap; unsigned long current_jiffies, timeout; /* read gpio port */ - gpio = bttv_gpio_read(ir->sub->core); + gpio = bttv_gpio_read(&btv->c); /* remote IRQ? */ if (!(gpio & 0x20)) @@ -492,14 +426,15 @@ static int ir_rc5_irq(struct bttv_sub_device *sub) } /* toggle GPIO pin 4 to reset the irq */ - bttv_gpio_write(ir->sub->core, gpio & ~(1 << 4)); - bttv_gpio_write(ir->sub->core, gpio | (1 << 4)); + bttv_gpio_write(&btv->c, gpio & ~(1 << 4)); + bttv_gpio_write(&btv->c, gpio | (1 << 4)); return 1; } -static void ir_rc5_timer_end(unsigned long data) + +static void bttv_rc5_timer_end(unsigned long data) { - struct IR *ir = (struct IR *)data; + struct bttv_ir *ir = (struct bttv_ir *)data; struct timeval tv; unsigned long current_jiffies, timeout; u32 gap; @@ -518,20 +453,20 @@ static void ir_rc5_timer_end(unsigned long data) /* Allow some timmer jitter (RC5 is ~24ms anyway so this is ok) */ if (gap < 28000) { - dprintk("spurious timer_end\n"); + dprintk(KERN_WARNING "spurious timer_end\n"); return; } ir->active = 0; if (ir->last_bit < 20) { /* ignore spurious codes (caused by light/other remotes) */ - dprintk("short code: %x\n", ir->code); + dprintk(KERN_WARNING "short code: %x\n", ir->code); } else { u32 rc5 = rc5_decode(ir->code); /* two start bits? */ if (RC5_START(rc5) != 3) { - dprintk("rc5 start bits invalid: %u\n", RC5_START(rc5)); + dprintk(KERN_WARNING "rc5 start bits invalid: %u\n", RC5_START(rc5)); /* right address? */ } else if (RC5_ADDR(rc5) == 0x0) { @@ -541,10 +476,10 @@ static void ir_rc5_timer_end(unsigned long data) /* Good code, decide if repeat/repress */ if (toggle != RC5_TOGGLE(ir->last_rc5) || instr != RC5_INSTR(ir->last_rc5)) { - dprintk("instruction %x, toggle %x\n", instr, + dprintk(KERN_WARNING "instruction %x, toggle %x\n", instr, toggle); - ir_input_nokey(ir->input, &ir->ir); - ir_input_keydown(ir->input, &ir->ir, instr, + ir_input_nokey(ir->dev, &ir->ir); + ir_input_keydown(ir->dev, &ir->ir, instr, instr); } @@ -559,34 +494,37 @@ static void ir_rc5_timer_end(unsigned long data) } } -static void ir_rc5_timer_keyup(unsigned long data) +static void bttv_rc5_timer_keyup(unsigned long data) { - struct IR *ir = (struct IR *)data; + struct bttv_ir *ir = (struct bttv_ir *)data; - dprintk("key released\n"); - ir_input_nokey(ir->input, &ir->ir); + dprintk(KERN_DEBUG "key released\n"); + ir_input_nokey(ir->dev, &ir->ir); } /* ---------------------------------------------------------------------- */ -static int ir_probe(struct device *dev) +int bttv_input_init(struct bttv *btv) { - struct bttv_sub_device *sub = to_bttv_sub_dev(dev); - struct IR *ir; - struct input_dev *input_dev; + struct bttv_ir *ir; IR_KEYTAB_TYPE *ir_codes = NULL; + struct input_dev *input_dev; int ir_type = IR_TYPE_OTHER; - ir = kzalloc(sizeof(*ir), GFP_KERNEL); + if (!btv->has_remote) + return -ENODEV; + + ir = kzalloc(sizeof(*ir),GFP_KERNEL); input_dev = input_allocate_device(); if (!ir || !input_dev) { kfree(ir); input_free_device(input_dev); return -ENOMEM; } + memset(ir,0,sizeof(*ir)); /* detect & configure */ - switch (sub->core->type) { + switch (btv->c.type) { case BTTV_BOARD_AVERMEDIA: case BTTV_BOARD_AVPHONE98: case BTTV_BOARD_AVERMEDIA98: @@ -642,12 +580,12 @@ static int ir_probe(struct device *dev) break; case BTTV_BOARD_NEBULA_DIGITV: ir_codes = ir_codes_nebula; - driver.any_irq = ir_rc5_irq; - driver.gpio_irq = NULL; + btv->custom_irq = bttv_rc5_irq; ir->rc5_gpio = 1; break; } if (NULL == ir_codes) { + dprintk(KERN_INFO "Ooops: IR config error [card=%d]\n",btv->c.type); kfree(ir); input_free_device(input_dev); return -ENODEV; @@ -656,108 +594,92 @@ static int ir_probe(struct device *dev) if (ir->rc5_gpio) { u32 gpio; /* enable remote irq */ - bttv_gpio_inout(sub->core, (1 << 4), 1 << 4); - gpio = bttv_gpio_read(sub->core); - bttv_gpio_write(sub->core, gpio & ~(1 << 4)); - bttv_gpio_write(sub->core, gpio | (1 << 4)); + bttv_gpio_inout(&btv->c, (1 << 4), 1 << 4); + gpio = bttv_gpio_read(&btv->c); + bttv_gpio_write(&btv->c, gpio & ~(1 << 4)); + bttv_gpio_write(&btv->c, gpio | (1 << 4)); } else { /* init hardware-specific stuff */ - bttv_gpio_inout(sub->core, ir->mask_keycode | ir->mask_keydown, 0); + bttv_gpio_inout(&btv->c, ir->mask_keycode | ir->mask_keydown, 0); } /* init input device */ + ir->dev = input_dev; + snprintf(ir->name, sizeof(ir->name), "bttv IR (card=%d)", - sub->core->type); + btv->c.type); snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", - pci_name(sub->core->pci)); + pci_name(btv->c.pci)); - ir->input = input_dev; - ir->sub = sub; ir_input_init(input_dev, &ir->ir, ir_type, ir_codes); input_dev->name = ir->name; input_dev->phys = ir->phys; input_dev->id.bustype = BUS_PCI; input_dev->id.version = 1; - if (sub->core->pci->subsystem_vendor) { - input_dev->id.vendor = sub->core->pci->subsystem_vendor; - input_dev->id.product = sub->core->pci->subsystem_device; + if (btv->c.pci->subsystem_vendor) { + input_dev->id.vendor = btv->c.pci->subsystem_vendor; + input_dev->id.product = btv->c.pci->subsystem_device; } else { - input_dev->id.vendor = sub->core->pci->vendor; - input_dev->id.product = sub->core->pci->device; + input_dev->id.vendor = btv->c.pci->vendor; + input_dev->id.product = btv->c.pci->device; } - input_dev->cdev.dev = &sub->core->pci->dev; + input_dev->cdev.dev = &btv->c.pci->dev; + btv->remote = ir; if (ir->polling) { - INIT_WORK(&ir->work, ir_work, ir); init_timer(&ir->timer); - ir->timer.function = ir_timer; - ir->timer.data = (unsigned long)ir; - schedule_work(&ir->work); + ir->timer.function = bttv_input_timer; + ir->timer.data = (unsigned long)btv; + ir->timer.expires = jiffies + HZ; + add_timer(&ir->timer); } else if (ir->rc5_gpio) { /* set timer_end for code completion */ init_timer(&ir->timer_end); - ir->timer_end.function = ir_rc5_timer_end; + ir->timer_end.function = bttv_rc5_timer_end; ir->timer_end.data = (unsigned long)ir; init_timer(&ir->timer_keyup); - ir->timer_keyup.function = ir_rc5_timer_keyup; + ir->timer_keyup.function = bttv_rc5_timer_keyup; ir->timer_keyup.data = (unsigned long)ir; } /* all done */ - dev_set_drvdata(dev, ir); - input_register_device(ir->input); + input_register_device(btv->remote->dev); + printk(DEVNAME ": %s detected at %s\n",ir->dev->name,ir->dev->phys); /* the remote isn't as bouncy as a keyboard */ - ir->input->rep[REP_DELAY] = repeat_delay; - ir->input->rep[REP_PERIOD] = repeat_period; + ir->dev->rep[REP_DELAY] = repeat_delay; + ir->dev->rep[REP_PERIOD] = repeat_period; return 0; } -static int ir_remove(struct device *dev) +void bttv_input_fini(struct bttv *btv) { - struct IR *ir = dev_get_drvdata(dev); + if (btv->remote == NULL) + return; - if (ir->polling) { - del_timer(&ir->timer); + if (btv->remote->polling) { + del_timer_sync(&btv->remote->timer); flush_scheduled_work(); } - if (ir->rc5_gpio) { + + if (btv->remote->rc5_gpio) { u32 gpio; - del_timer(&ir->timer_end); + del_timer(&btv->remote->timer_end); flush_scheduled_work(); - gpio = bttv_gpio_read(ir->sub->core); - bttv_gpio_write(ir->sub->core, gpio & ~(1 << 4)); + gpio = bttv_gpio_read(&btv->c); + bttv_gpio_write(&btv->c, gpio & ~(1 << 4)); } - input_unregister_device(ir->input); - kfree(ir); - return 0; + input_unregister_device(btv->remote->dev); + kfree(btv->remote); + btv->remote = NULL; } -/* ---------------------------------------------------------------------- */ - -MODULE_AUTHOR("Gerd Knorr, Pavel Machek"); -MODULE_DESCRIPTION("input driver for bt8x8 gpio IR remote controls"); -MODULE_LICENSE("GPL"); - -static int ir_init(void) -{ - return bttv_sub_register(&driver, "remote"); -} - -static void ir_fini(void) -{ - bttv_sub_unregister(&driver); -} - -module_init(ir_init); -module_exit(ir_fini); - /* * Local variables: diff --git a/drivers/media/video/bttv.h b/drivers/media/video/bttv.h index a5f172fe9f9..9feaa6bab20 100644 --- a/drivers/media/video/bttv.h +++ b/drivers/media/video/bttv.h @@ -16,6 +16,8 @@ #include <linux/videodev.h> #include <linux/i2c.h> +#include <media/ir-common.h> +#include <media/ir-kbd-i2c.h> /* ---------------------------------------------------------- */ /* exported by bttv-cards.c */ @@ -211,6 +213,34 @@ struct bttv_core { struct bttv; + +struct bttv_ir { + struct input_dev *dev; + struct ir_input_state ir; + char name[32]; + char phys[32]; + + /* Usual gpio signalling */ + + u32 mask_keycode; + u32 mask_keydown; + u32 mask_keyup; + u32 polling; + u32 last_gpio; + struct work_struct work; + struct timer_list timer; + + /* RC5 gpio */ + u32 rc5_gpio; + struct timer_list timer_end; /* timer_end for code completion */ + struct timer_list timer_keyup; /* timer_end for key release */ + u32 last_rc5; /* last good rc5 code */ + u32 last_bit; /* last raw bit seen */ + u32 code; /* raw code under construction */ + struct timeval base_time; /* time of last seen code */ + int active; /* building raw code */ +}; + struct tvcard { char *name; @@ -236,7 +266,6 @@ struct tvcard unsigned int has_dvb:1; unsigned int has_remote:1; unsigned int no_gpioirq:1; - unsigned int any_irq:1; /* other settings */ unsigned int pll; @@ -336,7 +365,6 @@ struct bttv_sub_driver { struct device_driver drv; char wanted[BUS_ID_SIZE]; void (*gpio_irq)(struct bttv_sub_device *sub); - int (*any_irq)(struct bttv_sub_device *sub); }; #define to_bttv_sub_drv(x) container_of((x), struct bttv_sub_driver, drv) @@ -364,6 +392,10 @@ extern int bttv_I2CWrite(struct bttv *btv, unsigned char addr, unsigned char b1, unsigned char b2, int both); extern void bttv_readee(struct bttv *btv, unsigned char *eedata, int addr); +extern int bttv_input_init(struct bttv *dev); +extern void bttv_input_fini(struct bttv *dev); +extern void bttv_input_irq(struct bttv *dev); + #endif /* _BTTV_H_ */ /* * Local variables: diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bttvp.h index d04d0238534..55759f698e0 100644 --- a/drivers/media/video/bttvp.h +++ b/drivers/media/video/bttvp.h @@ -209,7 +209,6 @@ extern struct bus_type bttv_sub_bus_type; int bttv_sub_add_device(struct bttv_core *core, char *name); int bttv_sub_del_devices(struct bttv_core *core); void bttv_gpio_irq(struct bttv_core *core); -int bttv_any_irq(struct bttv_core *core); /* ---------------------------------------------------------- */ @@ -275,7 +274,8 @@ struct bttv { struct bttv_pll_info pll; int triton1; int gpioirq; - int any_irq; + int (*custom_irq)(struct bttv *btv); + int use_i2c_hw; /* old gpio interface */ @@ -300,7 +300,7 @@ struct bttv { /* infrared remote */ int has_remote; - struct bttv_input *remote; + struct bttv_ir *remote; /* locking */ spinlock_t s_lock; |