diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/firewire/Kconfig | 44 | ||||
| -rw-r--r-- | drivers/ieee1394/Kconfig | 59 |
3 files changed, 56 insertions, 49 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index 8a07363417e..368ae6d3a09 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -28,7 +28,7 @@ source "drivers/md/Kconfig" source "drivers/message/fusion/Kconfig" -source "drivers/ieee1394/Kconfig" +source "drivers/firewire/Kconfig" source "drivers/message/i2o/Kconfig" diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig index 13efcd36207..a9371b36a9b 100644 --- a/drivers/firewire/Kconfig +++ b/drivers/firewire/Kconfig @@ -1,5 +1,10 @@ +menu "IEEE 1394 (FireWire) support" + depends on PCI || BROKEN + # firewire-core does not depend on PCI but is + # not useful without PCI controller driver + comment "You can enable one or both FireWire driver stacks." -comment "See the help texts for more information." +comment "The newer stack is recommended." config FIREWIRE tristate "FireWire driver stack" @@ -15,16 +20,6 @@ config FIREWIRE To compile this driver as a module, say M here: the module will be called firewire-core. - This module functionally replaces ieee1394, raw1394, and video1394. - To access it from application programs, you generally need at least - libraw1394 v2. IIDC/DCAM applications need libdc1394 v2. - No libraries are required to access storage devices through the - firewire-sbp2 driver. - - NOTE: - FireWire audio devices currently require the old drivers (ieee1394, - ohci1394, raw1394). - config FIREWIRE_OHCI tristate "OHCI-1394 controllers" depends on PCI && FIREWIRE @@ -34,22 +29,7 @@ config FIREWIRE_OHCI is the only chipset in use, so say Y here. To compile this driver as a module, say M here: The module will be - called firewire-ohci. It replaces ohci1394 of the classic IEEE 1394 - stack. - - NOTE: - If you want to install firewire-ohci and ohci1394 together, you - should configure them only as modules and blacklist the driver(s) - which you don't want to have auto-loaded. Add either - - blacklist firewire-ohci - or - blacklist ohci1394 - blacklist video1394 - blacklist dv1394 - - to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf - depending on your distribution. + called firewire-ohci. config FIREWIRE_OHCI_DEBUG bool @@ -66,8 +46,7 @@ config FIREWIRE_SBP2 like scanners. To compile this driver as a module, say M here: The module will be - called firewire-sbp2. It replaces sbp2 of the classic IEEE 1394 - stack. + called firewire-sbp2. You should also enable support for disks, CD-ROMs, etc. in the SCSI configuration section. @@ -83,5 +62,8 @@ config FIREWIRE_NET NOTE, this driver is not stable yet! To compile this driver as a module, say M here: The module will be - called firewire-net. It replaces eth1394 of the classic IEEE 1394 - stack. + called firewire-net. + +source "drivers/ieee1394/Kconfig" + +endmenu diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig index f102fcc7e52..e02096cf7d9 100644 --- a/drivers/ieee1394/Kconfig +++ b/drivers/ieee1394/Kconfig @@ -1,8 +1,3 @@ -menu "IEEE 1394 (FireWire) support" - depends on PCI || BROKEN - -source "drivers/firewire/Kconfig" - config IEEE1394 tristate "Legacy alternative FireWire driver stack" depends on PCI || BROKEN @@ -16,8 +11,13 @@ config IEEE1394 is the core support only, you will also need to select a driver for your IEEE 1394 adapter. - To compile this driver as a module, say M here: the - module will be called ieee1394. + To compile this driver as a module, say M here: the module will be + called ieee1394. + + NOTE: + ieee1394 is superseded by the newer firewire-core driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. config IEEE1394_OHCI1394 tristate "OHCI-1394 controllers" @@ -29,19 +29,23 @@ config IEEE1394_OHCI1394 use one of these chipsets. It should work with any OHCI-1394 compliant card, however. - To compile this driver as a module, say M here: the - module will be called ohci1394. + To compile this driver as a module, say M here: the module will be + called ohci1394. NOTE: + ohci1394 is superseded by the newer firewire-ohci driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + If you want to install firewire-ohci and ohci1394 together, you should configure them only as modules and blacklist the driver(s) which you don't want to have auto-loaded. Add either - blacklist firewire-ohci - or blacklist ohci1394 blacklist video1394 blacklist dv1394 + or + blacklist firewire-ohci to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf depending on your distribution. @@ -58,8 +62,8 @@ config IEEE1394_PCILYNX Instruments PCILynx chip. Note: this driver is written for revision 2 of this chip and may not work with revision 0. - To compile this driver as a module, say M here: the - module will be called pcilynx. + To compile this driver as a module, say M here: the module will be + called pcilynx. Only some old and now very rare PCI and CardBus cards and PowerMacs G3 B&W contain the PCILynx controller. Therefore @@ -79,6 +83,14 @@ config IEEE1394_SBP2 You should also enable support for disks, CD-ROMs, etc. in the SCSI configuration section. + To compile this driver as a module, say M here: the module will be + called sbp2. + + NOTE: + sbp2 is superseded by the newer firewire-sbp2 driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_SBP2_PHYS_DMA bool "Enable replacement for physical DMA in SBP2" depends on IEEE1394_SBP2 && VIRT_TO_BUS && EXPERIMENTAL @@ -111,6 +123,11 @@ config IEEE1394_ETH1394 The module is called eth1394 although it does not emulate Ethernet. + NOTE: + eth1394 is superseded by the newer firewire-net driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_RAWIO tristate "raw1394 userspace interface" depends on IEEE1394 @@ -123,6 +140,11 @@ config IEEE1394_RAWIO To compile this driver as a module, say M here: the module will be called raw1394. + NOTE: + raw1394 is superseded by the newer firewire-core driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_VIDEO1394 tristate "video1394 userspace interface" depends on IEEE1394 && IEEE1394_OHCI1394 @@ -136,13 +158,18 @@ config IEEE1394_VIDEO1394 To compile this driver as a module, say M here: the module will be called video1394. + NOTE: + video1394 is superseded by the newer firewire-core driver. See + http://ieee1394.wiki.kernel.org/index.php/Juju_Migration for + further information on how to switch to the new FireWire drivers. + config IEEE1394_DV1394 tristate "dv1394 userspace interface (deprecated)" depends on IEEE1394 && IEEE1394_OHCI1394 help The dv1394 driver is unsupported and may be removed from Linux in a - future release. Its functionality is now provided by raw1394 together - with libraries such as libiec61883. + future release. Its functionality is now provided by either + raw1394 or firewire-core together with libraries such as libiec61883. config IEEE1394_VERBOSEDEBUG bool "Excessive debugging output" @@ -153,5 +180,3 @@ config IEEE1394_VERBOSEDEBUG will quickly result in large amounts of data sent to the system log. Say Y if you really need the debugging output. Everyone else says N. - -endmenu |