diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ide/ide-cd.c | 14 | ||||
| -rw-r--r-- | drivers/ide/ide-disk.c | 16 | ||||
| -rw-r--r-- | drivers/ide/ide-floppy.c | 16 | ||||
| -rw-r--r-- | drivers/ide/ide-proc.c | 310 | ||||
| -rw-r--r-- | drivers/ide/ide-tape.c | 17 | ||||
| -rw-r--r-- | drivers/ide/ide.c | 313 | ||||
| -rw-r--r-- | drivers/scsi/ide-scsi.c | 16 |
7 files changed, 355 insertions, 347 deletions
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 29408cfd986..252ab8295ed 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -3059,10 +3059,14 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive) return nslots; } +#ifdef CONFIG_IDE_PROC_FS static void ide_cdrom_add_settings(ide_drive_t *drive) { ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL); } +#else +static inline void ide_cdrom_add_settings(ide_drive_t *drive) { ; } +#endif /* * standard prep_rq_fn that builds 10 byte cmds @@ -3291,7 +3295,7 @@ static void ide_cd_remove(ide_drive_t *drive) { struct cdrom_info *info = drive->driver_data; - ide_unregister_subdriver(drive, info->driver); + ide_proc_unregister_driver(drive, info->driver); del_gendisk(info->disk); @@ -3336,8 +3340,6 @@ static ide_proc_entry_t idecd_proc[] = { { "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL }, { NULL, 0, NULL, NULL } }; -#else -# define idecd_proc NULL #endif static ide_driver_t ide_cdrom_driver = { @@ -3355,7 +3357,9 @@ static ide_driver_t ide_cdrom_driver = { .end_request = ide_end_request, .error = __ide_error, .abort = __ide_abort, +#ifdef CONFIG_IDE_PROC_FS .proc = idecd_proc, +#endif }; static int idecd_open(struct inode * inode, struct file * file) @@ -3517,7 +3521,7 @@ static int ide_cd_probe(ide_drive_t *drive) ide_init_disk(g, drive); - ide_register_subdriver(drive, &ide_cdrom_driver); + ide_proc_register_driver(drive, &ide_cdrom_driver); kref_init(&info->kref); @@ -3534,7 +3538,7 @@ static int ide_cd_probe(ide_drive_t *drive) g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE; if (ide_cdrom_setup(drive)) { struct cdrom_device_info *devinfo = &info->devinfo; - ide_unregister_subdriver(drive, &ide_cdrom_driver); + ide_proc_unregister_driver(drive, &ide_cdrom_driver); kfree(info->buffer); kfree(info->toc); kfree(info->changer_info); diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index fb162cb3ebf..7fff773f2df 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -560,7 +560,6 @@ static sector_t idedisk_capacity (ide_drive_t *drive) } #ifdef CONFIG_IDE_PROC_FS - static int smart_enable(ide_drive_t *drive) { ide_task_t args; @@ -678,11 +677,6 @@ static ide_proc_entry_t idedisk_proc[] = { { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_smart_thresholds, NULL }, { NULL, 0, NULL, NULL } }; - -#else - -#define idedisk_proc NULL - #endif /* CONFIG_IDE_PROC_FS */ static void idedisk_prepare_flush(request_queue_t *q, struct request *rq) @@ -881,6 +875,7 @@ static int set_lba_addressing(ide_drive_t *drive, int arg) return 0; } +#ifdef CONFIG_IDE_PROC_FS static void idedisk_add_settings(ide_drive_t *drive) { struct hd_driveid *id = drive->id; @@ -898,6 +893,9 @@ static void idedisk_add_settings(ide_drive_t *drive) ide_add_setting(drive, "failures", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, &drive->failures, NULL); ide_add_setting(drive, "max_failures", SETTING_RW, TYPE_INT, 0, 65535, 1, 1, &drive->max_failures, NULL); } +#else +static inline void idedisk_add_settings(ide_drive_t *drive) { ; } +#endif static void idedisk_setup (ide_drive_t *drive) { @@ -1016,7 +1014,7 @@ static void ide_disk_remove(ide_drive_t *drive) struct ide_disk_obj *idkp = drive->driver_data; struct gendisk *g = idkp->disk; - ide_unregister_subdriver(drive, idkp->driver); + ide_proc_unregister_driver(drive, idkp->driver); del_gendisk(g); @@ -1081,7 +1079,9 @@ static ide_driver_t idedisk_driver = { .end_request = ide_end_request, .error = __ide_error, .abort = __ide_abort, +#ifdef CONFIG_IDE_PROC_FS .proc = idedisk_proc, +#endif }; static int idedisk_open(struct inode *inode, struct file *filp) @@ -1257,7 +1257,7 @@ static int ide_disk_probe(ide_drive_t *drive) ide_init_disk(g, drive); - ide_register_subdriver(drive, &idedisk_driver); + ide_proc_register_driver(drive, &idedisk_driver); kref_init(&idkp->kref); diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 38fe45cf401..f429be88c4f 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1811,6 +1811,7 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id) return 0; } +#ifdef CONFIG_IDE_PROC_FS static void idefloppy_add_settings(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; @@ -1823,6 +1824,9 @@ static void idefloppy_add_settings(ide_drive_t *drive) ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &floppy->ticks, NULL); } +#else +static inline void idefloppy_add_settings(ide_drive_t *drive) { ; } +#endif /* * Driver initialization. @@ -1873,7 +1877,7 @@ static void ide_floppy_remove(ide_drive_t *drive) idefloppy_floppy_t *floppy = drive->driver_data; struct gendisk *g = floppy->disk; - ide_unregister_subdriver(drive, floppy->driver); + ide_proc_unregister_driver(drive, floppy->driver); del_gendisk(g); @@ -1893,7 +1897,6 @@ static void ide_floppy_release(struct kref *kref) } #ifdef CONFIG_IDE_PROC_FS - static int proc_idefloppy_read_capacity (char *page, char **start, off_t off, int count, int *eof, void *data) { @@ -1909,11 +1912,6 @@ static ide_proc_entry_t idefloppy_proc[] = { { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, { NULL, 0, NULL, NULL } }; - -#else - -#define idefloppy_proc NULL - #endif /* CONFIG_IDE_PROC_FS */ static int ide_floppy_probe(ide_drive_t *); @@ -1933,7 +1931,9 @@ static ide_driver_t idefloppy_driver = { .end_request = idefloppy_do_end_request, .error = __ide_error, .abort = __ide_abort, +#ifdef CONFIG_IDE_PROC_FS .proc = idefloppy_proc, +#endif }; static int idefloppy_open(struct inode *inode, struct file *filp) @@ -2159,7 +2159,7 @@ static int ide_floppy_probe(ide_drive_t *drive) ide_init_disk(g, drive); - ide_register_subdriver(drive, &idefloppy_driver); + ide_proc_register_driver(drive, &idefloppy_driver); kref_init(&floppy->kref); diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index a9e0b30fb1f..949a6f609d8 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -3,6 +3,8 @@ * * Copyright (C) 1997-1998 Mark Lord * Copyright (C) 2003 Red Hat <alan@redhat.com> + * + * Some code was moved here from ide.c, see it for original copyrights. */ /* @@ -121,6 +123,265 @@ static int proc_ide_read_identify PROC_IDE_READ_RETURN(page,start,off,count,eof,len); } +/** + * __ide_add_setting - add an ide setting option + * @drive: drive to use + * @name: setting name + * @rw: true if the function is read write + * @data_type: type of data + * @min: range minimum + * @max: range maximum + * @mul_factor: multiplication scale + * @div_factor: divison scale + * @data: private data field + * @set: setting + * @auto_remove: setting auto removal flag + * + * Removes the setting named from the device if it is present. + * The function takes the settings_lock to protect against + * parallel changes. This function must not be called from IRQ + * context. Returns 0 on success or -1 on failure. + * + * BUGS: This code is seriously over-engineered. There is also + * magic about how the driver specific features are setup. If + * a driver is attached we assume the driver settings are auto + * remove. + */ + +static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set, int auto_remove) +{ + ide_settings_t **p = (ide_settings_t **) &drive->settings, *setting = NULL; + + down(&ide_setting_sem); + while ((*p) && strcmp((*p)->name, name) < 0) + p = &((*p)->next); + if ((setting = kzalloc(sizeof(*setting), GFP_KERNEL)) == NULL) + goto abort; + if ((setting->name = kmalloc(strlen(name) + 1, GFP_KERNEL)) == NULL) + goto abort; + strcpy(setting->name, name); + setting->rw = rw; + setting->data_type = data_type; + setting->min = min; + setting->max = max; + setting->mul_factor = mul_factor; + setting->div_factor = div_factor; + setting->data = data; + setting->set = set; + + setting->next = *p; + if (auto_remove) + setting->auto_remove = 1; + *p = setting; + up(&ide_setting_sem); + return 0; +abort: + up(&ide_setting_sem); + kfree(setting); + return -1; +} + +int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set) +{ + return __ide_add_setting(drive, name, rw, data_type, min, max, mul_factor, div_factor, data, set, 1); +} + +EXPORT_SYMBOL(ide_add_setting); + +/** + * __ide_remove_setting - remove an ide setting option + * @drive: drive to use + * @name: setting name + * + * Removes the setting named from the device if it is present. + * The caller must hold the setting semaphore. + */ + +static void __ide_remove_setting (ide_drive_t *drive, char *name) +{ + ide_settings_t **p, *setting; + + p = (ide_settings_t **) &drive->settings; + + while ((*p) && strcmp((*p)->name, name)) + p = &((*p)->next); + if ((setting = (*p)) == NULL) + return; + + (*p) = setting->next; + + kfree(setting->name); + kfree(setting); +} + +/** + * auto_remove_settings - remove driver specific settings + * @drive: drive + * + * Automatically remove all the driver specific settings for this + * drive. This function may not be called from IRQ context. The + * caller must hold ide_setting_sem. + */ + +static void auto_remove_settings (ide_drive_t *drive) +{ + ide_settings_t *setting; +repeat: + setting = drive->settings; + while (setting) { + if (setting->auto_remove) { + __ide_remove_setting(drive, setting->name); + goto repeat; + } + setting = setting->next; + } +} + +/** + * ide_find_setting_by_name - find a drive specific setting + * @drive: drive to scan + * @name: setting name + * + * Scan's the device setting table for a matching entry and returns + * this or NULL if no entry is found. The caller must hold the + * setting semaphore + */ + +static ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name) +{ + ide_settings_t *setting = drive->settings; + + while (setting) { + if (strcmp(setting->name, name) == 0) + break; + setting = setting->next; + } + return setting; +} + +/** + * ide_read_setting - read an IDE setting + * @drive: drive to read from + * @setting: drive setting + * + * Read a drive setting and return the value. The caller + * must hold the ide_setting_sem when making this call. + * + * BUGS: the data return and error are the same return value + * so an error -EINVAL and true return of the same value cannot + * be told apart + */ + +static int ide_read_setting(ide_drive_t *drive, ide_settings_t *setting) +{ + int val = -EINVAL; + unsigned long flags; + + if ((setting->rw & SETTING_READ)) { + spin_lock_irqsave(&ide_lock, flags); + switch(setting->data_type) { + case TYPE_BYTE: + val = *((u8 *) setting->data); + break; + case TYPE_SHORT: + val = *((u16 *) setting->data); + break; + case TYPE_INT: + val = *((u32 *) setting->data); + break; + } + spin_unlock_irqrestore(&ide_lock, flags); + } + return val; +} + +/** + * ide_write_setting - read an IDE setting + * @drive: drive to read from + * @setting: drive setting + * @val: value + * + * Write a drive setting if it is possible. The caller + * must hold the ide_setting_sem when making this call. + * + * BUGS: the data return and error are the same return value + * so an error -EINVAL and true return of the same value cannot + * be told apart + * + * FIXME: This should be changed to enqueue a special request + * to the driver to change settings, and then wait on a sema for completion. + * The current scheme of polling is kludgy, though safe enough. + */ + +static int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int val) +{ + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + if (setting->set) + return setting->set(drive, val); + if (!(setting->rw & SETTING_WRITE)) + return -EPERM; + if (val < setting->min || val > setting->max) + return -EINVAL; + if (ide_spin_wait_hwgroup(drive)) + return -EBUSY; + switch (setting->data_type) { + case TYPE_BYTE: + *((u8 *) setting->data) = val; + break; + case TYPE_SHORT: + *((u16 *) setting->data) = val; + break; + case TYPE_INT: + *((u32 *) setting->data) = val; + break; + } + spin_unlock_irq(&ide_lock); + return 0; +} + +static int set_xfer_rate (ide_drive_t *drive, int arg) +{ + int err; + + if (arg < 0 || arg > 70) + return -EINVAL; + + err = ide_wait_cmd(drive, + WIN_SETFEATURES, (u8) arg, + SETFEATURES_XFER, 0, NULL); + + if (!err && arg) { + ide_set_xfer_rate(drive, (u8) arg); + ide_driveid_update(drive); + } + return err; +} + +/** + * ide_add_generic_settings - generic ide settings + * @drive: drive being configured + * + * Add the generic parts of the system settings to the /proc files. + * The caller must not be holding the ide_setting_sem. + */ + +void ide_add_generic_settings (ide_drive_t *drive) +{ +/* + * drive setting name read/write access data type min max mul_factor div_factor data pointer set function + */ + __ide_add_setting(drive, "io_32bit", drive->no_io_32bit ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1 + (SUPPORT_VLB_SYNC << 1), 1, 1, &drive->io_32bit, set_io_32bit, 0); + __ide_add_setting(drive, "keepsettings", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->keep_settings, NULL, 0); + __ide_add_setting(drive, "nice1", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->nice1, NULL, 0); + __ide_add_setting(drive, "pio_mode", SETTING_WRITE, TYPE_BYTE, 0, 255, 1, 1, NULL, set_pio_mode, 0); + __ide_add_setting(drive, "unmaskirq", drive->no_unmask ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->unmask, NULL, 0); + __ide_add_setting(drive, "using_dma", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->using_dma, set_using_dma, 0); + __ide_add_setting(drive, "init_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->init_speed, NULL, 0); + __ide_add_setting(drive, "current_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->current_speed, set_xfer_rate, 0); + __ide_add_setting(drive, "number", SETTING_RW, TYPE_BYTE, 0, 3, 1, 1, &drive->dn, NULL, 0); +} + static void proc_ide_settings_warn(void) { static int warned = 0; @@ -399,7 +660,7 @@ static ide_proc_entry_t generic_drive_entries[] = { { NULL, 0, NULL, NULL } }; -void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data) +static void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data) { struct proc_dir_entry *ent; @@ -415,7 +676,7 @@ void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void } } -void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p) +static void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p) { if (!dir || !p) return; @@ -425,6 +686,51 @@ void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p) } } +void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) +{ + ide_add_proc_entries(drive->proc, driver->proc, drive); +} + +EXPORT_SYMBOL(ide_proc_register_driver); + +/** + * ide_proc_unregister_driver - remove driver specific data + * @drive: drive + * @driver: driver + * + * Clean up the driver specific /proc files and IDE settings + * for a given drive. + * + * Takes ide_setting_sem and ide_lock. + * Caller must hold none of the locks. + */ + +void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) +{ + unsigned long flags; + + ide_remove_proc_entries(drive->proc, driver->proc); + + down(&ide_setting_sem); + spin_lock_irqsave(&ide_lock, flags); + /* + * ide_setting_sem protects the settings list + * ide_lock protects the use of settings + * + * so we need to hold both, ide_settings_sem because we want to + * modify the settings list, and ide_lock because we cannot take + * a setting out that is being used. + * + * OTOH both ide_{read,write}_setting are only ever used under + * ide_setting_sem. + */ + auto_remove_settings(drive); + spin_unlock_irqrestore(&ide_lock, flags); + up(&ide_setting_sem); +} + +EXPORT_SYMBOL(ide_proc_unregister_driver); + static void create_proc_ide_drives(ide_hwif_t *hwif) { int d; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index fa0d22de37a..e82bfa5e0ab 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -4561,6 +4561,8 @@ static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive) printk(KERN_INFO "ide-tape: Adjusted block size - %d\n", tape->tape_block_size); #endif /* IDETAPE_DEBUG_INFO */ } + +#ifdef CONFIG_IDE_PROC_FS static void idetape_add_settings (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; @@ -4583,6 +4585,9 @@ static void idetape_add_settings (ide_drive_t *drive) ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->avg_speed, NULL); ide_add_setting(drive, "debug_level", SETTING_RW, TYPE_INT, 0, 0xffff, 1, 1, &tape->debug_level, NULL); } +#else +static inline void idetape_add_settings(ide_drive_t *drive) { ; } +#endif /* * ide_setup is called to: @@ -4703,7 +4708,7 @@ static void ide_tape_remove(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - ide_unregister_subdriver(drive, tape->driver); + ide_proc_unregister_driver(drive, tape->driver); ide_unregister_region(tape->disk); @@ -4731,7 +4736,6 @@ static void ide_tape_release(struct kref *kref) } #ifdef CONFIG_IDE_PROC_FS - static int proc_idetape_read_name (char *page, char **start, off_t off, int count, int *eof, void *data) { @@ -4749,11 +4753,6 @@ static ide_proc_entry_t idetape_proc[] = { { "name", S_IFREG|S_IRUGO, proc_idetape_read_name, NULL }, { NULL, 0, NULL, NULL } }; - -#else - -#define idetape_proc NULL - #endif static int ide_tape_probe(ide_drive_t *); @@ -4773,7 +4772,9 @@ static ide_driver_t idetape_driver = { .end_request = idetape_end_request, .error = __ide_error, .abort = __ide_abort, +#ifdef CONFIG_IDE_PROC_FS .proc = idetape_proc, +#endif }; /* @@ -4864,7 +4865,7 @@ static int ide_tape_probe(ide_drive_t *drive) ide_init_disk(g, drive); - ide_register_subdriver(drive, &idetape_driver); + ide_proc_register_driver(drive, &idetape_driver); kref_init(&tape->kref); diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 8793a960210..614c5fd43cd 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -826,178 +826,6 @@ DECLARE_MUTEX(ide_setting_sem); EXPORT_SYMBOL_GPL(ide_setting_sem); /** - * __ide_add_setting - add an ide setting option - * @drive: drive to use - * @name: setting name - * @rw: true if the function is read write - * @data_type: type of data - * @min: range minimum - * @max: range maximum - * @mul_factor: multiplication scale - * @div_factor: divison scale - * @data: private data field - * @set: setting - * @auto_remove: setting auto removal flag - * - * Removes the setting named from the device if it is present. - * The function takes the settings_lock to protect against - * parallel changes. This function must not be called from IRQ - * context. Returns 0 on success or -1 on failure. - * - * BUGS: This code is seriously over-engineered. There is also - * magic about how the driver specific features are setup. If - * a driver is attached we assume the driver settings are auto - * remove. - */ - -static int __ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set, int auto_remove) -{ - ide_settings_t **p = (ide_settings_t **) &drive->settings, *setting = NULL; - - down(&ide_setting_sem); - while ((*p) && strcmp((*p)->name, name) < 0) - p = &((*p)->next); - if ((setting = kzalloc(sizeof(*setting), GFP_KERNEL)) == NULL) - goto abort; - if ((setting->name = kmalloc(strlen(name) + 1, GFP_KERNEL)) == NULL) - goto abort; - strcpy(setting->name, name); - setting->rw = rw; - setting->data_type = data_type; - setting->min = min; - setting->max = max; - setting->mul_factor = mul_factor; - setting->div_factor = div_factor; - setting->data = data; - setting->set = set; - - setting->next = *p; - if (auto_remove) - setting->auto_remove = 1; - *p = setting; - up(&ide_setting_sem); - return 0; -abort: - up(&ide_setting_sem); - kfree(setting); - return -1; -} - -int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set) -{ - return __ide_add_setting(drive, name, rw, data_type, min, max, mul_factor, div_factor, data, set, 1); -} - -EXPORT_SYMBOL(ide_add_setting); - -/** - * __ide_remove_setting - remove an ide setting option - * @drive: drive to use - * @name: setting name - * - * Removes the setting named from the device if it is present. - * The caller must hold the setting semaphore. - */ - -static void __ide_remove_setting (ide_drive_t *drive, char *name) -{ - ide_settings_t **p, *setting; - - p = (ide_settings_t **) &drive->settings; - - while ((*p) && strcmp((*p)->name, name)) - p = &((*p)->next); - if ((setting = (*p)) == NULL) - return; - - (*p) = setting->next; - - kfree(setting->name); - kfree(setting); -} - -/** - * ide_find_setting_by_name - find a drive specific setting - * @drive: drive to scan - * @name: setting name - * - * Scan's the device setting table for a matching entry and returns - * this or NULL if no entry is found. The caller must hold the - * setting semaphore - */ - -ide_settings_t *ide_find_setting_by_name (ide_drive_t *drive, char *name) -{ - ide_settings_t *setting = drive->settings; - - while (setting) { - if (strcmp(setting->name, name) == 0) - break; - setting = setting->next; - } - return setting; -} - -/** - * auto_remove_settings - remove driver specific settings - * @drive: drive - * - * Automatically remove all the driver specific settings for this - * drive. This function may not be called from IRQ context. The - * caller must hold ide_setting_sem. - */ - -static void auto_remove_settings (ide_drive_t *drive) -{ - ide_settings_t *setting; -repeat: - setting = drive->settings; - while (setting) { - if (setting->auto_remove) { - __ide_remove_setting(drive, setting->name); - goto repeat; - } - setting = setting->next; - } -} - -/** - * ide_read_setting - read an IDE setting - * @drive: drive to read from - * @setting: drive setting - * - * Read a drive setting and return the value. The caller - * must hold the ide_setting_sem when making this call. - * - * BUGS: the data return and error are the same return value - * so an error -EINVAL and true return of the same value cannot - * be told apart - */ - -int ide_read_setting (ide_drive_t *drive, ide_settings_t *setting) -{ - int val = -EINVAL; - unsigned long flags; - - if ((setting->rw & SETTING_READ)) { - spin_lock_irqsave(&ide_lock, flags); - switch(setting->data_type) { - case TYPE_BYTE: - val = *((u8 *) setting->data); - break; - case TYPE_SHORT: - val = *((u16 *) setting->data); - break; - case TYPE_INT: - val = *((u32 *) setting->data); - break; - } - spin_unlock_irqrestore(&ide_lock, flags); - } - return val; -} - -/** * ide_spin_wait_hwgroup - wait for group * @drive: drive in the group * @@ -1030,52 +858,7 @@ int ide_spin_wait_hwgroup (ide_drive_t *drive) EXPORT_SYMBOL(ide_spin_wait_hwgroup); -/** - * ide_write_setting - read an IDE setting - * @drive: drive to read from - * @setting: drive setting - * @val: value - * - * Write a drive setting if it is possible. The caller - * must hold the ide_setting_sem when making this call. - * - * BUGS: the data return and error are the same return value - * so an error -EINVAL and true return of the same value cannot - * be told apart - * - * FIXME: This should be changed to enqueue a special request - * to the driver to change settings, and then wait on a sema for completion. - * The current scheme of polling is kludgy, though safe enough. - */ - -int ide_write_setting (ide_drive_t *drive, ide_settings_t *setting, int val) -{ - if (!capable(CAP_SYS_ADMIN)) - return -EACCES; - if (setting->set) - return setting->set(drive, val); - if (!(setting->rw & SETTING_WRITE)) - return -EPERM; - if (val < setting->min || val > setting->max) - return -EINVAL; - if (ide_spin_wait_hwgroup(drive)) - return -EBUSY; - switch (setting->data_type) { - case TYPE_BYTE: - *((u8 *) setting->data) = val; - break; - case TYPE_SHORT: - *((u16 *) setting->data) = val; - break; - case TYPE_INT: - *((u32 *) setting->data) = val; - break; - } - spin_unlock_irq(&ide_lock); - return 0; -} - -static int set_io_32bit(ide_drive_t *drive, int arg) +int set_io_32bit(ide_drive_t *drive, int arg) { if (drive->no_io_32bit) return -EPERM; @@ -1104,7 +887,7 @@ static int set_ksettings(ide_drive_t *drive, int arg) return 0; } -static int set_using_dma (ide_drive_t *drive, int arg) +int set_using_dma(ide_drive_t *drive, int arg) { #ifdef CONFIG_BLK_DEV_IDEDMA ide_hwif_t *hwif = drive->hwif; @@ -1152,7 +935,7 @@ out: #endif } -static int set_pio_mode (ide_drive_t *drive, int arg) +int set_pio_mode(ide_drive_t *drive, int arg) { struct request rq; @@ -1186,48 +969,6 @@ static int set_unmaskirq(ide_drive_t *drive, int arg) return 0; } -static int set_xfer_rate (ide_drive_t *drive, int arg) -{ - int err; - - if (arg < 0 || arg > 70) - return -EINVAL; - - err = ide_wait_cmd(drive, - WIN_SETFEATURES, (u8) arg, - SETFEATURES_XFER, 0, NULL); - - if (!err && arg) { - ide_set_xfer_rate(drive, (u8) arg); - ide_driveid_update(drive); - } - return err; -} - -/** - * ide_add_generic_settings - generic ide settings - * @drive: drive being configured - * - * Add the generic parts of the system settings to the /proc files. - * The caller must not be holding the ide_setting_sem. - */ - -void ide_add_generic_settings (ide_drive_t *drive) -{ -/* - * drive setting name read/write access data type min max mul_factor div_factor data pointer set function - */ - __ide_add_setting(drive, "io_32bit", drive->no_io_32bit ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1 + (SUPPORT_VLB_SYNC << 1), 1, 1, &drive->io_32bit, set_io_32bit, 0); - __ide_add_setting(drive, "keepsettings", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->keep_settings, NULL, 0); - __ide_add_setting(drive, "nice1", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->nice1, NULL, 0); - __ide_add_setting(drive, "pio_mode", SETTING_WRITE, TYPE_BYTE, 0, 255, 1, 1, NULL, set_pio_mode, 0); - __ide_add_setting(drive, "unmaskirq", drive->no_unmask ? SETTING_READ : SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->unmask, NULL, 0); - __ide_add_setting(drive, "using_dma", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->using_dma, set_using_dma, 0); - __ide_add_setting(drive, "init_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->init_speed, NULL, 0); - __ide_add_setting(drive, "current_speed", SETTING_RW, TYPE_BYTE, 0, 70, 1, 1, &drive->current_speed, set_xfer_rate, 0); - __ide_add_setting(drive, "number", SETTING_RW, TYPE_BYTE, 0, 3, 1, 1, &drive->dn, NULL, 0); -} - /** * system_bus_clock - clock guess * @@ -1922,54 +1663,6 @@ static void __init probe_for_hwifs (void) #endif } -void ide_register_subdriver(ide_drive_t *drive, ide_driver_t *driver) -{ -#ifdef CONFIG_IDE_PROC_FS - ide_add_proc_entries(drive->proc, driver->proc, drive); -#endif -} - -EXPORT_SYMBOL(ide_register_subdriver); - -/** - * ide_unregister_subdriver - disconnect drive from driver - * @drive: drive to unplug - * @driver: driver - * - * Disconnect a drive from the driver it was attached to and then - * clean up the various proc files and other objects attached to it. - * - * Takes ide_setting_sem and ide_lock. - * Caller must hold none of the locks. - */ - -void ide_unregister_subdriver(ide_drive_t *drive, ide_driver_t *driver) -{ - unsigned long flags; - -#ifdef CONFIG_IDE_PROC_FS - ide_remove_proc_entries(drive->proc, driver->proc); -#endif - down(&ide_setting_sem); - spin_lock_irqsave(&ide_lock, flags); - /* - * ide_setting_sem protects the settings list - * ide_lock protects the use of settings - * - * so we need to hold both, ide_settings_sem because we want to - * modify the settings list, and ide_lock because we cannot take - * a setting out that is being used. - * - * OTOH both ide_{read,write}_setting are only ever used under - * ide_setting_sem. - */ - auto_remove_settings(drive); - spin_unlock_irqrestore(&ide_lock, flags); - up(&ide_setting_sem); -} - -EXPORT_SYMBOL(ide_unregister_subdriver); - /* * Probe module */ diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 4388b8ab69a..8263f752809 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -721,6 +721,7 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r return ide_stopped; } +#ifdef CONFIG_IDE_PROC_FS static void idescsi_add_settings(ide_drive_t *drive) { idescsi_scsi_t *scsi = drive_to_idescsi(drive); @@ -734,6 +735,9 @@ static void idescsi_add_settings(ide_drive_t *drive) ide_add_setting(drive, "transform", SETTING_RW, TYPE_INT, 0, 3, 1, 1, &scsi->transform, NULL); ide_add_setting(drive, "log", SETTING_RW, TYPE_INT, 0, 1, 1, 1, &scsi->log, NULL); } +#else +static inline void idescsi_add_settings(ide_drive_t *drive) { ; } +#endif /* * Driver initialization. @@ -756,7 +760,7 @@ static void ide_scsi_remove(ide_drive_t *drive) struct ide_scsi_obj *scsi = scsihost_to_idescsi(scsihost); struct gendisk *g = scsi->disk; - ide_unregister_subdriver(drive, scsi->driver); + ide_proc_unregister_driver(drive, scsi->driver); ide_unregister_region(g); @@ -775,8 +779,6 @@ static ide_proc_entry_t idescsi_proc[] = { { "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL }, { NULL, 0, NULL, NULL } }; -#else -# define idescsi_proc NULL #endif static ide_driver_t idescsi_driver = { @@ -790,11 +792,13 @@ static ide_driver_t idescsi_driver = { .version = IDESCSI_VERSION, .media = ide_scsi, .supports_dsc_overlap = 0, - .proc = idescsi_proc, .do_request = idescsi_do_request, .end_request = idescsi_end_request, .error = idescsi_atapi_error, .abort = idescsi_atapi_abort, +#ifdef CONFIG_IDE_PROC_FS + .proc = idescsi_proc, +#endif }; static int idescsi_ide_open(struct inode *inode, struct file *filp) @@ -1153,7 +1157,7 @@ static int ide_scsi_probe(ide_drive_t *drive) idescsi->host = host; idescsi->disk = g; g->private_data = &idescsi->driver; - ide_register_subdriver(drive, &idescsi_driver); + ide_proc_register_driver(drive, &idescsi_driver); err = 0; idescsi_setup(drive, idescsi); g->fops = &idescsi_ops; @@ -1165,7 +1169,7 @@ static int ide_scsi_probe(ide_drive_t *drive) } /* fall through on error */ ide_unregister_region(g); - ide_unregister_subdriver(drive, &idescsi_driver); + ide_proc_unregister_driver(drive, &idescsi_driver); put_disk(g); out_host_put: |