diff options
Diffstat (limited to 'drivers')
32 files changed, 266 insertions, 146 deletions
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index e5cfb1fa47d..157fa81a264 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1867,7 +1867,7 @@ static int ipmi_pci_resume(struct pci_dev *pdev) static struct pci_device_id ipmi_pci_devices[] = { { PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) }, - { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE) } + { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) } }; MODULE_DEVICE_TABLE(pci, ipmi_pci_devices); diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 4bde30bb3be..75e9e38330f 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -230,34 +230,43 @@ static struct kobj_type ktype_memctrl = { */ static int edac_sysfs_memctrl_setup(void) { - int err=0; + int err = 0; debugf1("%s()\n", __func__); /* create the /sys/devices/system/edac directory */ err = sysdev_class_register(&edac_class); - if (!err) { - /* Init the MC's kobject */ - memset(&edac_memctrl_kobj, 0, sizeof (edac_memctrl_kobj)); - edac_memctrl_kobj.parent = &edac_class.kset.kobj; - edac_memctrl_kobj.ktype = &ktype_memctrl; + if (err) { + debugf1("%s() error=%d\n", __func__, err); + return err; + } - /* generate sysfs "..../edac/mc" */ - err = kobject_set_name(&edac_memctrl_kobj,"mc"); + /* Init the MC's kobject */ + memset(&edac_memctrl_kobj, 0, sizeof (edac_memctrl_kobj)); + edac_memctrl_kobj.parent = &edac_class.kset.kobj; + edac_memctrl_kobj.ktype = &ktype_memctrl; - if (!err) { - /* FIXME: maybe new sysdev_create_subdir() */ - err = kobject_register(&edac_memctrl_kobj); + /* generate sysfs "..../edac/mc" */ + err = kobject_set_name(&edac_memctrl_kobj,"mc"); - if (err) - debugf1("Failed to register '.../edac/mc'\n"); - else - debugf1("Registered '.../edac/mc' kobject\n"); - } - } else - debugf1("%s() error=%d\n", __func__, err); + if (err) + goto fail; + + /* FIXME: maybe new sysdev_create_subdir() */ + err = kobject_register(&edac_memctrl_kobj); + + if (err) { + debugf1("Failed to register '.../edac/mc'\n"); + goto fail; + } + debugf1("Registered '.../edac/mc' kobject\n"); + + return 0; + +fail: + sysdev_class_unregister(&edac_class); return err; } diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 2b0ea8b6608..753fe0e2145 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -75,6 +75,7 @@ static struct amd_ide_chip { { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, AMD_UDMA_100 }, { 0 } }; @@ -491,7 +492,8 @@ static ide_pci_device_t amd74xx_chipsets[] __devinitdata = { /* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"), /* 17 */ DECLARE_NV_DEV("NFORCE-MCP61"), /* 18 */ DECLARE_NV_DEV("NFORCE-MCP65"), - /* 19 */ DECLARE_AMD_DEV("AMD5536"), + /* 19 */ DECLARE_NV_DEV("NFORCE-MCP67"), + /* 20 */ DECLARE_AMD_DEV("AMD5536"), }; static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) @@ -530,7 +532,8 @@ static struct pci_device_id amd74xx_pci_tbl[] = { { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18 }, - { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 20 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl); diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c index d8d256daddd..5800beeebb8 100644 --- a/drivers/isdn/gigaset/common.c +++ b/drivers/isdn/gigaset/common.c @@ -616,7 +616,7 @@ static struct bc_state *gigaset_initbcs(struct bc_state *bcs, } else if ((bcs->skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL) skb_reserve(bcs->skb, HW_HDR_LEN); else { - gig_dbg(DEBUG_INIT, "could not allocate skb\n"); + warn("could not allocate skb\n"); bcs->inputstate |= INS_skip_frame; } diff --git a/drivers/isdn/hysdn/hysdn_sched.c b/drivers/isdn/hysdn/hysdn_sched.c index 1fadf0133e9..18758772b74 100644 --- a/drivers/isdn/hysdn/hysdn_sched.c +++ b/drivers/isdn/hysdn/hysdn_sched.c @@ -155,21 +155,17 @@ hysdn_tx_cfgline(hysdn_card *card, unsigned char *line, unsigned short chan) if (card->debug_flags & LOG_SCHED_ASYN) hysdn_addlog(card, "async tx-cfg chan=%d len=%d", chan, strlen(line) + 1); - spin_lock_irqsave(&card->hysdn_lock, flags); while (card->async_busy) { - sti(); if (card->debug_flags & LOG_SCHED_ASYN) hysdn_addlog(card, "async tx-cfg delayed"); msleep_interruptible(20); /* Timeout 20ms */ - if (!--cnt) { - spin_unlock_irqrestore(&card->hysdn_lock, flags); + if (!--cnt) return (-ERR_ASYNC_TIME); /* timed out */ - } - cli(); } /* wait for buffer to become free */ + spin_lock_irqsave(&card->hysdn_lock, flags); strcpy(card->async_data, line); card->async_len = strlen(line) + 1; card->async_channel = chan; @@ -177,30 +173,23 @@ hysdn_tx_cfgline(hysdn_card *card, unsigned char *line, unsigned short chan) /* now queue the task */ schedule_work(&card->irq_queue); - sti(); + spin_unlock_irqrestore(&card->hysdn_lock, flags); if (card->debug_flags & LOG_SCHED_ASYN) hysdn_addlog(card, "async tx-cfg data queued"); cnt++; /* short delay */ - cli(); while (card->async_busy) { - sti(); if (card->debug_flags & LOG_SCHED_ASYN) hysdn_addlog(card, "async tx-cfg waiting for tx-ready"); msleep_interruptible(20); /* Timeout 20ms */ - if (!--cnt) { - spin_unlock_irqrestore(&card->hysdn_lock, flags); + if (!--cnt) return (-ERR_ASYNC_TIME); /* timed out */ - } - cli(); } /* wait for buffer to become free again */ - spin_unlock_irqrestore(&card->hysdn_lock, flags); - if (card->debug_flags & LOG_SCHED_ASYN) hysdn_addlog(card, "async tx-cfg data send"); diff --git a/drivers/md/md.c b/drivers/md/md.c index 50ab4a936e3..d1113560440 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3200,6 +3200,7 @@ static int do_md_run(mddev_t * mddev) mddev->changed = 1; md_new_event(mddev); + kobject_uevent(&mddev->gendisk->kobj, KOBJ_ONLINE); return 0; } @@ -3313,6 +3314,7 @@ static int do_md_stop(mddev_t * mddev, int mode) module_put(mddev->pers->owner); mddev->pers = NULL; + kobject_uevent(&mddev->gendisk->kobj, KOBJ_OFFLINE); if (mddev->ro) mddev->ro = 0; } diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c index bbdba7b37e1..db9d7df75ae 100644 --- a/drivers/misc/lkdtm.c +++ b/drivers/misc/lkdtm.c @@ -44,12 +44,14 @@ */ #include <linux/kernel.h> +#include <linux/fs.h> #include <linux/module.h> +#include <linux/buffer_head.h> #include <linux/kprobes.h> -#include <linux/kallsyms.h> +#include <linux/list.h> #include <linux/init.h> -#include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/hrtimer.h> #include <scsi/scsi_cmnd.h> #ifdef CONFIG_IDE @@ -116,16 +118,16 @@ static enum ctype cptype = NONE; static int count = DEFAULT_COUNT; module_param(recur_count, int, 0644); -MODULE_PARM_DESC(recur_count, "Recurcion level for the stack overflow test,\ - default is 10"); +MODULE_PARM_DESC(recur_count, " Recursion level for the stack overflow test, "\ + "default is 10"); module_param(cpoint_name, charp, 0644); -MODULE_PARM_DESC(cpoint_name, "Crash Point, where kernel is to be crashed"); -module_param(cpoint_type, charp, 06444); -MODULE_PARM_DESC(cpoint_type, "Crash Point Type, action to be taken on\ - hitting the crash point"); -module_param(cpoint_count, int, 06444); -MODULE_PARM_DESC(cpoint_count, "Crash Point Count, number of times the \ - crash point is to be hit to trigger action"); +MODULE_PARM_DESC(cpoint_name, " Crash Point, where kernel is to be crashed"); +module_param(cpoint_type, charp, 0644); +MODULE_PARM_DESC(cpoint_type, " Crash Point Type, action to be taken on "\ + "hitting the crash point"); +module_param(cpoint_count, int, 0644); +MODULE_PARM_DESC(cpoint_count, " Crash Point Count, number of times the "\ + "crash point is to be hit to trigger action"); unsigned int jp_do_irq(unsigned int irq) { @@ -155,8 +157,8 @@ void jp_ll_rw_block(int rw, int nr, struct buffer_head *bhs[]) struct scan_control; -unsigned long jp_shrink_page_list(struct list_head *page_list, - struct scan_control *sc) +unsigned long jp_shrink_inactive_list(unsigned long max_scan, + struct zone *zone, struct scan_control *sc) { lkdtm_handler(); jprobe_return(); @@ -295,8 +297,8 @@ int lkdtm_module_init(void) lkdtm.entry = (kprobe_opcode_t*) jp_ll_rw_block; break; case MEM_SWAPOUT: - lkdtm.kp.symbol_name = "shrink_page_list"; - lkdtm.entry = (kprobe_opcode_t*) jp_shrink_page_list; + lkdtm.kp.symbol_name = "shrink_inactive_list"; + lkdtm.entry = (kprobe_opcode_t*) jp_shrink_inactive_list; break; case TIMERADD: lkdtm.kp.symbol_name = "hrtimer_start"; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 28c17d1ca5c..9cb3ca5806f 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -486,7 +486,7 @@ config SGI_IOC3_ETH_HW_TX_CSUM config MIPS_SIM_NET tristate "MIPS simulator Network device (EXPERIMENTAL)" - depends on NETDEVICES && MIPS_SIM && EXPERIMENTAL + depends on MIPS_SIM && EXPERIMENTAL help The MIPSNET device is a simple Ethernet network device which is emulated by the MIPS Simulator. @@ -2467,7 +2467,7 @@ config ISERIES_VETH config RIONET tristate "RapidIO Ethernet over messaging driver support" - depends on NETDEVICES && RAPIDIO + depends on RAPIDIO config RIONET_TX_SIZE int "Number of outbound queue entries" diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index b40724fc6b7..39ad9f73d1e 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -39,7 +39,7 @@ #include <asm/io.h> #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0034" +#define DRV_VERSION "EHEA_0043" #define EHEA_MSG_DEFAULT (NETIF_MSG_LINK | NETIF_MSG_TIMER \ | NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) @@ -105,9 +105,6 @@ #define EHEA_BCMC_VLANID_ALL 0x01 #define EHEA_BCMC_VLANID_SINGLE 0x00 -/* Use this define to kmallocate pHYP control blocks */ -#define H_CB_ALIGNMENT 4096 - #define EHEA_CACHE_LINE 128 /* Memory Regions */ diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c index 82eb2fb8c75..9f57c2e78ce 100644 --- a/drivers/net/ehea/ehea_ethtool.c +++ b/drivers/net/ehea/ehea_ethtool.c @@ -238,7 +238,7 @@ static void ehea_get_ethtool_stats(struct net_device *dev, data[i++] = port->port_res[0].swqe_refill_th; data[i++] = port->resets; - cb6 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb6 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb6) { ehea_error("no mem for cb6"); return; diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 4538c99733f..6ad69610141 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -92,7 +92,7 @@ static struct net_device_stats *ehea_get_stats(struct net_device *dev) memset(stats, 0, sizeof(*stats)); - cb2 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb2 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb2) { ehea_error("no mem for cb2"); goto out; @@ -586,8 +586,8 @@ int ehea_sense_port_attr(struct ehea_port *port) u64 hret; struct hcp_ehea_port_cb0 *cb0; - cb0 = kzalloc(H_CB_ALIGNMENT, GFP_ATOMIC); /* May be called via */ - if (!cb0) { /* ehea_neq_tasklet() */ + cb0 = kzalloc(PAGE_SIZE, GFP_ATOMIC); /* May be called via */ + if (!cb0) { /* ehea_neq_tasklet() */ ehea_error("no mem for cb0"); ret = -ENOMEM; goto out; @@ -670,7 +670,7 @@ int ehea_set_portspeed(struct ehea_port *port, u32 port_speed) u64 hret; int ret = 0; - cb4 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb4 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb4) { ehea_error("no mem for cb4"); ret = -ENOMEM; @@ -985,7 +985,7 @@ static int ehea_configure_port(struct ehea_port *port) struct hcp_ehea_port_cb0 *cb0; ret = -ENOMEM; - cb0 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb0) goto out; @@ -1443,7 +1443,7 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa) goto out; } - cb0 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb0) { ehea_error("no mem for cb0"); ret = -ENOMEM; @@ -1501,7 +1501,7 @@ static void ehea_promiscuous(struct net_device *dev, int enable) if ((enable && port->promisc) || (!enable && !port->promisc)) return; - cb7 = kzalloc(H_CB_ALIGNMENT, GFP_ATOMIC); + cb7 = kzalloc(PAGE_SIZE, GFP_ATOMIC); if (!cb7) { ehea_error("no mem for cb7"); goto out; @@ -1870,7 +1870,7 @@ static void ehea_vlan_rx_register(struct net_device *dev, port->vgrp = grp; - cb1 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb1 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb1) { ehea_error("no mem for cb1"); goto out; @@ -1899,7 +1899,7 @@ static void ehea_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) int index; u64 hret; - cb1 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb1 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb1) { ehea_error("no mem for cb1"); goto out; @@ -1935,7 +1935,7 @@ static void ehea_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) if (port->vgrp) port->vgrp->vlan_devices[vid] = NULL; - cb1 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb1 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb1) { ehea_error("no mem for cb1"); goto out; @@ -1968,7 +1968,7 @@ int ehea_activate_qp(struct ehea_adapter *adapter, struct ehea_qp *qp) u64 dummy64 = 0; struct hcp_modify_qp_cb0* cb0; - cb0 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb0) { ret = -ENOMEM; goto out; @@ -2269,7 +2269,7 @@ int ehea_sense_adapter_attr(struct ehea_adapter *adapter) u64 hret; int ret; - cb = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb) { ret = -ENOMEM; goto out; @@ -2340,7 +2340,7 @@ static int ehea_setup_single_port(struct ehea_port *port, goto out; /* Enable Jumbo frames */ - cb4 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb4 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb4) { ehea_error("no mem for cb4"); } else { diff --git a/drivers/net/ehea/ehea_phyp.c b/drivers/net/ehea/ehea_phyp.c index 0b51a8cea07..0cfc2bc1a27 100644 --- a/drivers/net/ehea/ehea_phyp.c +++ b/drivers/net/ehea/ehea_phyp.c @@ -506,7 +506,7 @@ u64 ehea_h_register_rpage_mr(const u64 adapter_handle, const u64 mr_handle, const u8 pagesize, const u8 queue_type, const u64 log_pageaddr, const u64 count) { - if ((count > 1) && (log_pageaddr & 0xfff)) { + if ((count > 1) && (log_pageaddr & ~PAGE_MASK)) { ehea_error("not on pageboundary"); return H_PARAMETER; } diff --git a/drivers/net/ehea/ehea_phyp.h b/drivers/net/ehea/ehea_phyp.h index fa51e3b5bb0..919f94b7593 100644 --- a/drivers/net/ehea/ehea_phyp.h +++ b/drivers/net/ehea/ehea_phyp.h @@ -81,14 +81,16 @@ static inline u32 get_longbusy_msecs(int long_busy_ret_code) static inline void hcp_epas_ctor(struct h_epas *epas, u64 paddr_kernel, u64 paddr_user) { - epas->kernel.addr = ioremap(paddr_kernel, PAGE_SIZE); + /* To support 64k pages we must round to 64k page boundary */ + epas->kernel.addr = ioremap((paddr_kernel & PAGE_MASK), PAGE_SIZE) + + (paddr_kernel & ~PAGE_MASK); epas->user.addr = paddr_user; } static inline void hcp_epas_dtor(struct h_epas *epas) { if (epas->kernel.addr) - iounmap(epas->kernel.addr); + iounmap((void __iomem*)((u64)epas->kernel.addr & PAGE_MASK)); epas->user.addr = 0; epas->kernel.addr = 0; diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c index 3e1862326c8..72ef7bde334 100644 --- a/drivers/net/ehea/ehea_qmr.c +++ b/drivers/net/ehea/ehea_qmr.c @@ -209,11 +209,11 @@ int ehea_destroy_cq(struct ehea_cq *cq) { u64 adapter_handle, hret; - adapter_handle = cq->adapter->handle; - if (!cq) return 0; + adapter_handle = cq->adapter->handle; + /* deregister all previous registered pages */ hret = ehea_h_free_resource(adapter_handle, cq->fw_handle); if (hret != H_SUCCESS) { @@ -512,7 +512,7 @@ int ehea_reg_mr_adapter(struct ehea_adapter *adapter) start = KERNELBASE; end = (u64)high_memory; - nr_pages = (end - start) / PAGE_SIZE; + nr_pages = (end - start) / EHEA_PAGESIZE; pt = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!pt) { @@ -538,9 +538,9 @@ int ehea_reg_mr_adapter(struct ehea_adapter *adapter) if (nr_pages > 1) { u64 num_pages = min(nr_pages, (u64)512); for (i = 0; i < num_pages; i++) - pt[i] = virt_to_abs((void*)(((u64)start) - + ((k++) * - PAGE_SIZE))); + pt[i] = virt_to_abs((void*)(((u64)start) + + ((k++) * + EHEA_PAGESIZE))); hret = ehea_h_register_rpage_mr(adapter->handle, adapter->mr.handle, 0, @@ -548,8 +548,9 @@ int ehea_reg_mr_adapter(struct ehea_adapter *adapter) num_pages); nr_pages -= num_pages; } else { - u64 abs_adr = virt_to_abs((void*)(((u64)start) - + (k * PAGE_SIZE))); + u64 abs_adr = virt_to_abs((void*)(((u64)start) + + (k * EHEA_PAGESIZE))); + hret = ehea_h_register_rpage_mr(adapter->handle, adapter->mr.handle, 0, 0, abs_adr,1); diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 8e398499c04..8f059b7968b 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -68,8 +68,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.67" -#define DRV_MODULE_RELDATE "October 18, 2006" +#define DRV_MODULE_VERSION "3.68" +#define DRV_MODULE_RELDATE "November 02, 2006" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -6014,7 +6014,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tg3_abort_hw(tp, 1); } - if ((tp->tg3_flags2 & TG3_FLG2_MII_SERDES) && reset_phy) + if (reset_phy) tg3_phy_reset(tp); err = tg3_chip_reset(tp); @@ -6574,7 +6574,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl); } - err = tg3_setup_phy(tp, reset_phy); + err = tg3_setup_phy(tp, 0); if (err) return err; diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c index 2ddbec6bf15..7d383a27b92 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c @@ -189,20 +189,24 @@ void bcm43xx_leds_update(struct bcm43xx_private *bcm, int activity) case BCM43xx_LED_INACTIVE: continue; case BCM43xx_LED_OFF: + case BCM43xx_LED_BCM4303_3: break; case BCM43xx_LED_ON: turn_on = 1; break; case BCM43xx_LED_ACTIVITY: + case BCM43xx_LED_BCM4303_0: turn_on = activity; break; case BCM43xx_LED_RADIO_ALL: turn_on = radio->enabled; break; case BCM43xx_LED_RADIO_A: + case BCM43xx_LED_BCM4303_2: turn_on = (radio->enabled && phy->type == BCM43xx_PHYTYPE_A); break; case BCM43xx_LED_RADIO_B: + case BCM43xx_LED_BCM4303_1: turn_on = (radio->enabled && (phy->type == BCM43xx_PHYTYPE_B || phy->type == BCM43xx_PHYTYPE_G)); @@ -257,7 +261,8 @@ void bcm43xx_leds_update(struct bcm43xx_private *bcm, int activity) continue; #endif /* CONFIG_BCM43XX_DEBUG */ default: - assert(0); + dprintkl(KERN_INFO PFX "Bad value in leds_update," + " led->behaviour: 0x%x\n", led->behaviour); }; if (led->activelow) diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.h b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h index d3716cf3aeb..811e14a8119 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h @@ -46,6 +46,12 @@ enum { /* LED behaviour values */ BCM43xx_LED_TEST_BLINKSLOW, BCM43xx_LED_TEST_BLINKMEDIUM, BCM43xx_LED_TEST_BLINKFAST, + + /* Misc values for BCM4303 */ + BCM43xx_LED_BCM4303_0 = 0x2B, + BCM43xx_LED_BCM4303_1 = 0x78, + BCM43xx_LED_BCM4303_2 = 0x2E, + BCM43xx_LED_BCM4303_3 = 0x19, }; int bcm43xx_leds_init(struct bcm43xx_private *bcm); diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index a94c6d8826f..65edb56107f 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -3163,9 +3163,11 @@ static int estimate_periodic_work_badness(unsigned int state) static void bcm43xx_periodic_work_handler(void *d) { struct bcm43xx_private *bcm = d; + struct net_device *net_dev = bcm->net_dev; unsigned long flags; u32 savedirqs = 0; int badness; + unsigned long orig_trans_start = 0; mutex_lock(&bcm->mutex); badness = estimate_periodic_work_badness(bcm->periodic_state); @@ -3173,7 +3175,18 @@ static void bcm43xx_periodic_work_handler(void *d) /* Periodic work will take a long time, so we want it to * be preemtible. */ - netif_tx_disable(bcm->net_dev); + + netif_tx_lock_bh(net_dev); + /* We must fake a started transmission here, as we are going to + * disable TX. If we wouldn't fake a TX, it would be possible to + * trigger the netdev watchdog, if the last real TX is already + * some time on the past (slightly less than 5secs) + */ + orig_trans_start = net_dev->trans_start; + net_dev->trans_start = jiffies; + netif_stop_queue(net_dev); + netif_tx_unlock_bh(net_dev); + spin_lock_irqsave(&bcm->irq_lock, flags); bcm43xx_mac_suspend(bcm); if (bcm43xx_using_pio(bcm)) @@ -3198,6 +3211,7 @@ static void bcm43xx_periodic_work_handler(void *d) bcm43xx_pio_thaw_txqueues(bcm); bcm43xx_mac_enable(bcm); netif_wake_queue(bcm->net_dev); + net_dev->trans_start = orig_trans_start; } mmiowb(); spin_unlock_irqrestore(&bcm->irq_lock, flags); diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c index 6dfa041be66..bc81b13a5a2 100644 --- a/drivers/net/wireless/hostap/hostap_plx.c +++ b/drivers/net/wireless/hostap/hostap_plx.c @@ -364,7 +364,7 @@ static int prism2_plx_check_cis(void __iomem *attr_mem, int attr_len, pos = 0; while (pos < CIS_MAX_LEN - 1 && cis[pos] != CISTPL_END) { - if (pos + cis[pos + 1] >= CIS_MAX_LEN) + if (pos + 2 + cis[pos + 1] > CIS_MAX_LEN) goto cis_error; switch (cis[pos]) { @@ -391,7 +391,7 @@ static int prism2_plx_check_cis(void __iomem *attr_mem, int attr_len, break; case CISTPL_MANFID: - if (cis[pos + 1] < 5) + if (cis[pos + 1] < 4) goto cis_error; manfid1 = cis[pos + 2] + (cis[pos + 3] << 8); manfid2 = cis[pos + 4] + (cis[pos + 5] << 8); diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index ecc50db8585..5f1b9f58070 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -19,7 +19,7 @@ config PCI_MSI config PCI_MULTITHREAD_PROBE bool "PCI Multi-threaded probe (EXPERIMENTAL)" - depends on PCI && EXPERIMENTAL + depends on PCI && EXPERIMENTAL && BROKEN help Say Y here if you want the PCI core to spawn a new thread for every PCI device that is probed. This can cause a huge diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 146298ad737..c3c0626f550 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -281,7 +281,6 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n) up(&board_lock); return 0; } -EXPORT_SYMBOL_GPL(spi_register_board_info); /* FIXME someone should add support for a __setup("spi", ...) that * creates board info from kernel command lines diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 809d465eb25..6303970e93c 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -722,6 +722,7 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t usblp->wcomplete = 0; err = usb_submit_urb(usblp->writeurb, GFP_KERNEL); if (err) { + usblp->wcomplete = 1; if (err != -ENOMEM) count = -EIO; else @@ -1202,8 +1203,6 @@ static int usblp_suspend (struct usb_interface *intf, pm_message_t message) down (&usblp->sem); /* we take no more IO */ usblp->sleeping = 1; - /* we wait for anything printing */ - wait_event (usblp->wait, usblp->wcomplete || !usblp->present); usblp_unlink_urbs(usblp); up (&usblp->sem); mutex_unlock (&usblp_mutex); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 66bff184a30..ba165aff9ea 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1188,6 +1188,7 @@ static inline void show_string(struct usb_device *udev, char *id, char *string) #ifdef CONFIG_USB_OTG #include "otg_whitelist.h" +static int __usb_port_suspend(struct usb_device *, int port1); #endif /** @@ -1289,8 +1290,6 @@ int usb_new_device(struct usb_device *udev) * (Includes HNP test device.) */ if (udev->bus->b_hnp_enable || udev->bus->is_b_host) { - static int __usb_port_suspend(struct usb_device *, - int port1); err = __usb_port_suspend(udev, udev->bus->otg_port); if (err < 0) dev_dbg(&udev->dev, "HNP fail, %d\n", err); diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 45f44fe33bf..6daf85c6eee 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -270,7 +270,7 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign * Read data value from item. */ -static __inline__ __u32 item_udata(struct hid_item *item) +static u32 item_udata(struct hid_item *item) { switch (item->size) { case 1: return item->data.u8; @@ -280,7 +280,7 @@ static __inline__ __u32 item_udata(struct hid_item *item) return 0; } -static __inline__ __s32 item_sdata(struct hid_item *item) +static s32 item_sdata(struct hid_item *item) { switch (item->size) { case 1: return item->data.s8; @@ -727,7 +727,7 @@ static struct hid_device *hid_parse_report(__u8 *start, unsigned size) * done by hand. */ -static __inline__ __s32 snto32(__u32 value, unsigned n) +static s32 snto32(__u32 value, unsigned n) { switch (n) { case 8: return ((__s8)value); @@ -741,9 +741,9 @@ static __inline__ __s32 snto32(__u32 value, unsigned n) * Convert a signed 32-bit integer to a signed n-bit integer. */ -static __inline__ __u32 s32ton(__s32 value, unsigned n) +static u32 s32ton(__s32 value, unsigned n) { - __s32 a = value >> (n - 1); + s32 a = value >> (n - 1); if (a && a != -1) return value < 0 ? 1 << (n - 1) : (1 << (n - 1)) - 1; return value & ((1 << n) - 1); @@ -751,30 +751,55 @@ static __inline__ __u32 s32ton(__s32 value, unsigned n) /* * Extract/implement a data field from/to a little endian report (bit array). + * + * Code sort-of follows HID spec: + * http://www.usb.org/developers/devclass_docs/HID1_11.pdf + * + * While the USB HID spec allows unlimited length bit fields in "report + * descriptors", most devices never use more than 16 bits. + * One model of UPS is claimed to report "LINEV" as a 32-bit field. + * Search linux-kernel and linux-usb-devel archives for "hid-core extract". */ static __inline__ __u32 extract(__u8 *report, unsigned offset, unsigned n) { - u32 x; + u64 x; + + WARN_ON(n > 32); report += offset >> 3; /* adjust byte index */ - offset &= 8 - 1; - x = get_unaligned((u32 *) report); - x = le32_to_cpu(x); - x = (x >> offset) & ((1 << n) - 1); - return x; + offset &= 7; /* now only need bit offset into one byte */ + x = get_unaligned((u64 *) report); + x = le64_to_cpu(x); + x = (x >> offset) & ((1ULL << n) - 1); /* extract bit field */ + return (u32) x; } +/* + * "implement" : set bits in a little endian bit stream. + * Same concepts as "extract" (see comments above). + * The data mangled in the bit stream remains in little endian + * order the whole time. It make more sense to talk about + * endianness of register values by considering a register + * a "cached" copy of the little endiad bit stream. + */ static __inline__ void implement(__u8 *report, unsigned offset, unsigned n, __u32 value) { - u32 x; + u64 x; + u64 m = (1ULL << n) - 1; + + WARN_ON(n > 32); + + WARN_ON(value > m); + value &= m; report += offset >> 3; - offset &= 8 - 1; - x = get_unaligned((u32 *)report); - x &= cpu_to_le32(~((((__u32) 1 << n) - 1) << offset)); - x |= cpu_to_le32(value << offset); - put_unaligned(x,(u32 *)report); + offset &= 7; + + x = get_unaligned((u64 *)report); + x &= cpu_to_le64(~(m << offset)); + x |= cpu_to_le64(((u64) value) << offset); + put_unaligned(x, (u64 *) report); } /* @@ -1615,6 +1640,9 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_SUN 0x0430 #define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab +#define USB_VENDOR_ID_AIRCABLE 0x16CA +#define USB_DEVICE_ID_AIRCABLE1 0x1502 + /* * Alphabetically sorted blacklist by quirk type. */ @@ -1632,6 +1660,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_22, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_23, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40, HID_QUIRK_IGNORE }, diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c index 2902742895a..933ceddf3de 100644 --- a/drivers/usb/input/usbtouchscreen.c +++ b/drivers/usb/input/usbtouchscreen.c @@ -640,7 +640,7 @@ static int usbtouch_probe(struct usb_interface *intf, type->max_press, 0, 0); usb_fill_int_urb(usbtouch->irq, usbtouch->udev, - usb_rcvintpipe(usbtouch->udev, 0x81), + usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress), usbtouch->data, type->rept_size, usbtouch_irq, usbtouch, endpoint->bInterval); diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c index 6a12a943b93..df97e5c803f 100644 --- a/drivers/usb/input/xpad.c +++ b/drivers/usb/input/xpad.c @@ -2,6 +2,10 @@ * X-Box gamepad - v0.0.6 * * Copyright (c) 2002 Marko Friedemann <mfr@bmx-chemnitz.de> + * 2004 Oliver Schwartz <Oliver.Schwartz@gmx.de>, + * Steven Toth <steve@toth.demon.co.uk>, + * Franz Lehner <franz@caos.at>, + * Ivan Hawkes <blackhawk@ivanhawkes.com> * 2005 Dominic Cerquetti <binary1230@yahoo.com> * 2006 Adam Buchbinder <adam.buchbinder@gmail.com> * @@ -29,6 +33,7 @@ * - ITO Takayuki for providing essential xpad information on his website * - Vojtech Pavlik - iforce driver / input subsystem * - Greg Kroah-Hartman - usb-skeleton driver + * - XBOX Linux project - extra USB id's * * TODO: * - fine tune axes (especially trigger axes) @@ -54,6 +59,13 @@ * - fixed d-pad to axes mapping * * 2002-07-17 - 0.0.5 : simplified d-pad handling + * + * 2004-10-02 - 0.0.6 : DDR pad support + * - borrowed from the XBOX linux kernel + * - USB id's for commonly used dance pads are present + * - dance pads will map D-PAD to buttons, not axes + * - pass the module paramater 'dpad_to_buttons' to force + * the D-PAD to map to buttons if your pad is not detected */ #include <linux/kernel.h> @@ -90,8 +102,35 @@ static const struct xpad_device { { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES }, { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES }, { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES }, - { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES }, + { 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES }, { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS }, + { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES }, + { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES }, + { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES }, + { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES }, + { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES }, + { 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES }, + { 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES }, + { 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES }, + { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES }, + { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS }, + { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES }, + { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS }, + { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES }, + { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES }, + { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES }, + { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES }, + { 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES}, + { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES }, + { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES }, + { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES }, + { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES }, + { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES }, + { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES }, + { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES }, + { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS }, + { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS }, + { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES }, { 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN } }; diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig index 454a186b64a..e081836014a 100644 --- a/drivers/usb/net/Kconfig +++ b/drivers/usb/net/Kconfig @@ -92,8 +92,13 @@ config USB_RTL8150 To compile this driver as a module, choose M here: the module will be called rtl8150. +config USB_USBNET_MII + tristate + default n + config USB_USBNET tristate "Multi-purpose USB Networking Framework" + select MII if USBNET_MII != n ---help--- This driver supports several kinds of network links over USB, with "minidrivers" built around a common network driver core @@ -129,7 +134,7 @@ config USB_NET_AX8817X tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters" depends on USB_USBNET && NET_ETHERNET select CRC32 - select MII + select USB_USBNET_MII default y help This option adds support for ASIX AX88xxx based USB 2.0 @@ -210,6 +215,7 @@ config USB_NET_PLUSB config USB_NET_MCS7830 tristate "MosChip MCS7830 based Ethernet adapters" depends on USB_USBNET + select USB_USBNET_MII help Choose this option if you're using a 10/100 Ethernet USB2 adapter based on the MosChip 7830 controller. This includes diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 40873635d80..760b5327b81 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -669,6 +669,9 @@ done: * they'll probably want to use this base set. */ +#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE) +#define HAVE_MII + int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd) { struct usbnet *dev = netdev_priv(net); @@ -699,20 +702,6 @@ int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd) } EXPORT_SYMBOL_GPL(usbnet_set_settings); - -void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info) -{ - struct usbnet *dev = netdev_priv(net); - - /* REVISIT don't always return "usbnet" */ - strncpy (info->driver, driver_name, sizeof info->driver); - strncpy (info->version, DRIVER_VERSION, sizeof info->version); - strncpy (info->fw_version, dev->driver_info->description, - sizeof info->fw_version); - usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info); -} -EXPORT_SYMBOL_GPL(usbnet_get_drvinfo); - u32 usbnet_get_link (struct net_device *net) { struct usbnet *dev = netdev_priv(net); @@ -730,40 +719,57 @@ u32 usbnet_get_link (struct net_device *net) } EXPORT_SYMBOL_GPL(usbnet_get_link); -u32 usbnet_get_msglevel (struct net_device *net) +int usbnet_nway_reset(struct net_device *net) { struct usbnet *dev = netdev_priv(net); - return dev->msg_enable; + if (!dev->mii.mdio_write) + return -EOPNOTSUPP; + + return mii_nway_restart(&dev->mii); } -EXPORT_SYMBOL_GPL(usbnet_get_msglevel); +EXPORT_SYMBOL_GPL(usbnet_nway_reset); -void usbnet_set_msglevel (struct net_device *net, u32 level) +#endif /* HAVE_MII */ + +void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info) { struct usbnet *dev = netdev_priv(net); - dev->msg_enable = level; + /* REVISIT don't always return "usbnet" */ + strncpy (info->driver, driver_name, sizeof info->driver); + strncpy (info->version, DRIVER_VERSION, sizeof info->version); + strncpy (info->fw_version, dev->driver_info->description, + sizeof info->fw_version); + usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info); } -EXPORT_SYMBOL_GPL(usbnet_set_msglevel); +EXPORT_SYMBOL_GPL(usbnet_get_drvinfo); -int usbnet_nway_reset(struct net_device *net) +u32 usbnet_get_msglevel (struct net_device *net) { struct usbnet *dev = netdev_priv(net); - if (!dev->mii.mdio_write) - return -EOPNOTSUPP; + return dev->msg_enable; +} +EXPORT_SYMBOL_GPL(usbnet_get_msglevel); - return mii_nway_restart(&dev->mii); +void usbnet_set_msglevel (struct net_device *net, u32 level) +{ + struct usbnet *dev = netdev_priv(net); + + dev->msg_enable = level; } -EXPORT_SYMBOL_GPL(usbnet_nway_reset); +EXPORT_SYMBOL_GPL(usbnet_set_msglevel); /* drivers may override default ethtool_ops in their bind() routine */ static struct ethtool_ops usbnet_ethtool_ops = { +#ifdef HAVE_MII .get_settings = usbnet_get_settings, .set_settings = usbnet_set_settings, - .get_drvinfo = usbnet_get_drvinfo, .get_link = usbnet_get_link, .nway_reset = usbnet_nway_reset, +#endif + .get_drvinfo = usbnet_get_drvinfo, .get_msglevel = usbnet_get_msglevel, .set_msglevel = usbnet_set_msglevel, }; diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 9a6ec1b5e3d..2a8dd4cc943 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -54,10 +54,10 @@ config USB_SERIAL_GENERIC properly. config USB_SERIAL_AIRCABLE - tristate "AIRcable USB Bluetooth Dongle Driver (EXPERIMENTAL)" + tristate "USB AIRcable Bluetooth Dongle Driver (EXPERIMENTAL)" depends on USB_SERIAL && EXPERIMENTAL help - Say Y here if you want to use AIRcable USB Bluetoot Dongle. + Say Y here if you want to use USB AIRcable Bluetooth Dongle. To compile this driver as a module, choose M here: the module will be called aircable. diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index bbf6532c26e..f95d42c0d16 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -64,6 +64,9 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ + { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ + { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ + { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index ea16572d19f..4b5097fa48d 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -35,6 +35,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ + { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 for Europe */ @@ -58,8 +59,10 @@ static struct usb_device_id id_table_3port [] = { { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ + { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */ + { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 for Europe */ { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 */ { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */ { } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 37ed8e0f2dc..bc1ac07bf6c 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1236,7 +1236,7 @@ UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100, "Cowon Systems", "iAUDIO M5", US_SC_DEVICE, US_PR_BULK, NULL, - 0 ), + US_FL_NEED_OVERRIDE ), /* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */ UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300, @@ -1313,6 +1313,13 @@ UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Jan Mate <mate@fiit.stuba.sk> */ +UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, + "Sony Ericsson", + "P990i", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu> * Tested on hardware version 1.10. * Entry is needed only for the initializer function override. |