aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/media/video/saa7115.c793
-rw-r--r--drivers/media/video/saa711x_regs.h549
2 files changed, 1000 insertions, 342 deletions
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index e5558c92086..d5052dbd074 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -33,6 +33,7 @@
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
+#include "saa711x_regs.h"
#include <linux/kernel.h>
#include <linux/module.h>
@@ -111,385 +112,470 @@ static inline int saa7115_read(struct i2c_client *client, u8 reg)
static const unsigned char saa7115_init_auto_input[] = {
/* Front-End Part */
- 0x01, 0x48, /* white peak control disabled */
- 0x03, 0x20, /* was 0x30. 0x20: long vertical blanking */
- 0x04, 0x90, /* analog gain set to 0 */
- 0x05, 0x90, /* analog gain set to 0 */
+ R_01_INC_DELAY, 0x48, /* white peak control disabled */
+ R_03_INPUT_CNTL_2, 0x20, /* was 0x30. 0x20: long vertical blanking */
+ R_04_INPUT_CNTL_3, 0x90, /* analog gain set to 0 */
+ R_05_INPUT_CNTL_4, 0x90, /* analog gain set to 0 */
/* Decoder Part */
- 0x06, 0xeb, /* horiz sync begin = -21 */
- 0x07, 0xe0, /* horiz sync stop = -17 */
- 0x0a, 0x80, /* was 0x88. decoder brightness, 0x80 is itu standard */
- 0x0b, 0x44, /* was 0x48. decoder contrast, 0x44 is itu standard */
- 0x0c, 0x40, /* was 0x47. decoder saturation, 0x40 is itu standard */
- 0x0d, 0x00, /* chrominance hue control */
- 0x0f, 0x00, /* chrominance gain control: use automicatic mode */
- 0x10, 0x06, /* chrominance/luminance control: active adaptive combfilter */
- 0x11, 0x00, /* delay control */
- 0x12, 0x9d, /* RTS0 output control: VGATE */
- 0x13, 0x80, /* X-port output control: ITU656 standard mode, RTCO output enable RTCE */
- 0x14, 0x00, /* analog/ADC/auto compatibility control */
- 0x18, 0x40, /* raw data gain 0x00 = nominal */
- 0x19, 0x80, /* raw data offset 0x80 = 0 LSB */
- 0x1a, 0x77, /* color killer level control 0x77 = recommended */
- 0x1b, 0x42, /* misc chroma control 0x42 = recommended */
- 0x1c, 0xa9, /* combfilter control 0xA9 = recommended */
- 0x1d, 0x01, /* combfilter control 0x01 = recommended */
+ R_06_H_SYNC_START, 0xeb, /* horiz sync begin = -21 */
+ R_07_H_SYNC_STOP, 0xe0, /* horiz sync stop = -17 */
+ R_0A_LUMA_BRIGHT_CNTL, 0x80, /* was 0x88. decoder brightness, 0x80 is itu standard */
+ R_0B_LUMA_CONTRAST_CNTL, 0x44, /* was 0x48. decoder contrast, 0x44 is itu standard */
+ R_0C_CHROMA_SAT_CNTL, 0x40, /* was 0x47. decoder saturation, 0x40 is itu standard */
+ R_0D_CHROMA_HUE_CNTL, 0x00,
+ R_0F_CHROMA_GAIN_CNTL, 0x00, /* use automatic gain */
+ R_10_CHROMA_CNTL_2, 0x06, /* chroma: active adaptive combfilter */
+ R_11_MODE_DELAY_CNTL, 0x00,
+ R_12_RT_SIGNAL_CNTL, 0x9d, /* RTS0 output control: VGATE */
+ R_13_RT_X_PORT_OUT_CNTL, 0x80, /* ITU656 standard mode, RTCO output enable RTCE */
+ R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
+ R_18_RAW_DATA_GAIN_CNTL, 0x40, /* gain 0x00 = nominal */
+ R_19_RAW_DATA_OFF_CNTL, 0x80,
+ R_1A_COLOR_KILL_LVL_CNTL, 0x77, /* recommended value */
+ R_1B_MISC_TVVCRDET, 0x42, /* recommended value */
+ R_1C_ENHAN_COMB_CTRL1, 0xa9, /* recommended value */
+ R_1D_ENHAN_COMB_CTRL2, 0x01, /* recommended value */
/* Power Device Control */
- 0x88, 0xd0, /* reset device */
- 0x88, 0xf0, /* set device programmed, all in operational mode */
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset device */
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* set device programmed, all in operational mode */
0x00, 0x00
};
static const unsigned char saa7115_cfg_reset_scaler[] = {
- 0x87, 0x00, /* disable I-port output */
- 0x88, 0xd0, /* reset scaler */
- 0x88, 0xf0, /* activate scaler */
- 0x87, 0x01, /* enable I-port output */
+ R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00, /* disable I-port output */
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */
+ R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* enable I-port output */
0x00, 0x00
};
/* ============== SAA7715 VIDEO templates ============= */
static const unsigned char saa7115_cfg_60hz_fullres_x[] = {
- 0xcc, 0xd0, /* hsize low (output), hor. output window size = 0x2d0 = 720 */
- 0xcd, 0x02, /* hsize hi (output) */
+ /* hsize = 0x2d0 = 720 */
+ R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0,
+ R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02,
/* Why not in 60hz-Land, too? */
- 0xd0, 0x01, /* downscale = 1 */
- 0xd8, 0x00, /* hor lum scaling 0x0400 = 1 */
- 0xd9, 0x04,
- 0xdc, 0x00, /* hor chrom scaling 0x0200. must be hor lum scaling / 2 */
- 0xdd, 0x02, /* H-scaling incr chroma */
+ R_D0_B_HORIZ_PRESCALING, 0x01, /* downscale = 1 */
+ /* hor lum scaling 0x0400 = 1 */
+ R_D8_B_HORIZ_LUMA_SCALING_INC, 0x00,
+ R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, 0x04,
+
+ /* must be hor lum scaling / 2 */
+ R_DC_B_HORIZ_CHROMA_SCALING, 0x00,
+ R_DD_B_HORIZ_CHROMA_SCALING_MSB, 0x02,
0x00, 0x00
};
+
static const unsigned char saa7115_cfg_60hz_fullres_y[] = {
- 0xce, 0xf8, /* vsize low (output), ver. output window size = 248 (but 60hz is 240?) */
- 0xcf, 0x00, /* vsize hi (output) */
+ /* output window size = 248 (but 60hz is 240?) */
+ R_CE_B_VERT_OUTPUT_WINDOW_LENGTH, 0xf8,
+ R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00,
/* Why not in 60hz-Land, too? */
- 0xd5, 0x40, /* Lum contrast, nominal value = 0x40 */
- 0xd6, 0x40, /* Chroma satur. nominal value = 0x80 */
+ R_D5_B_LUMA_CONTRAST_CNTL, 0x40, /* Lum contrast, nominal value = 0x40 */
+ R_D6_B_CHROMA_SATURATION_CNTL, 0x40, /* Chroma satur. nominal value = 0x80 */
- 0xe0, 0x00, /* V-scaling incr luma low */
- 0xe1, 0x04, /* " hi */
- 0xe2, 0x00, /* V-scaling incr chroma low */
- 0xe3, 0x04, /* " hi */
+ R_E0_B_VERT_LUMA_SCALING_INC, 0x00,
+ R_E1_B_VERT_LUMA_SCALING_INC_MSB, 0x04,
+
+ R_E2_B_VERT_CHROMA_SCALING_INC, 0x00,
+ R_E3_B_VERT_CHROMA_SCALING_INC_MSB, 0x04,
0x00, 0x00
};
static const unsigned char saa7115_cfg_60hz_video[] = {
- 0x80, 0x00, /* reset tasks */
- 0x88, 0xd0, /* reset scaler */
+ R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */
- 0x15, 0x03, /* VGATE pulse start */
- 0x16, 0x11, /* VGATE pulse stop */
- 0x17, 0x9c, /* VGATE MSB and other values */
+ R_15_VGATE_START_FID_CHG, 0x03,
+ R_16_VGATE_STOP, 0x11,
+ R_17_MISC_VGATE_CONF_AND_MSB, 0x9c,
- 0x08, 0x68, /* 0xBO: auto detection, 0x68 = NTSC */
- 0x0e, 0x07, /* lots of different stuff... video autodetection is on */
+ R_08_SYNC_CNTL, 0x68, /* 0xBO: auto detection, 0x68 = NTSC */
+ R_0E_CHROMA_CNTL_1, 0x07, /* video autodetection is on */
- 0x5a, 0x06, /* Vertical offset, standard 60hz value for ITU656 line counting */
+ R_5A_V_OFF_FOR_SLICER, 0x06, /* standard 60hz value for ITU656 line counting */
/* Task A */
- 0x90, 0x80, /* Task Handling Control */
- 0x91, 0x48, /* X-port formats/config */
- 0x92, 0x40, /* Input Ref. signal Def. */
- 0x93, 0x84, /* I-port config */
- 0x94, 0x01, /* hoffset low (input), 0x0002 is minimum */
- 0x95, 0x00, /* hoffset hi (input) */
- 0x96, 0xd0, /* hsize low (input), 0x02d0 = 720 */
- 0x97, 0x02, /* hsize hi (input) */
- 0x98, 0x05, /* voffset low (input) */
- 0x99, 0x00, /* voffset hi (input) */
- 0x9a, 0x0c, /* vsize low (input), 0x0c = 12 */
- 0x9b, 0x00, /* vsize hi (input) */
- 0x9c, 0xa0, /* hsize low (output), 0x05a0 = 1440 */
- 0x9d, 0x05, /* hsize hi (output) */
- 0x9e, 0x0c, /* vsize low (output), 0x0c = 12 */
- 0x9f, 0x00, /* vsize hi (output) */
+ R_90_A_TASK_HANDLING_CNTL, 0x80,
+ R_91_A_X_PORT_FORMATS_AND_CONF, 0x48,
+ R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40,
+ R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84,
+
+ /* hoffset low (input), 0x0002 is minimum */
+ R_94_A_HORIZ_INPUT_WINDOW_START, 0x01,
+ R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
+
+ /* hsize low (input), 0x02d0 = 720 */
+ R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
+ R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
+
+ R_98_A_VERT_INPUT_WINDOW_START, 0x05,
+ R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00,
+
+ R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x0c,
+ R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00,
+
+ R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0,
+ R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05,
+
+ R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x0c,
+ R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00,
/* Task B */
- 0xc0, 0x00, /* Task Handling Control */
- 0xc1, 0x08, /* X-port formats/config */
- 0xc2, 0x00, /* Input Ref. signal Def. */
- 0xc3, 0x80, /* I-port config */
- 0xc4, 0x02, /* hoffset low (input), 0x0002 is minimum */
- 0xc5, 0x00, /* hoffset hi (input) */
- 0xc6, 0xd0, /* hsize low (input), 0x02d0 = 720 */
- 0xc7, 0x02, /* hsize hi (input) */
- 0xc8, 0x12, /* voffset low (input), 0x12 = 18 */
- 0xc9, 0x00, /* voffset hi (input) */
- 0xca, 0xf8, /* vsize low (input), 0xf8 = 248 */
- 0xcb, 0x00, /* vsize hi (input) */
- 0xcc, 0xd0, /* hsize low (output), 0x02d0 = 720 */
- 0xcd, 0x02, /* hsize hi (output) */
-
- 0xf0, 0xad, /* Set PLL Register. 60hz 525 lines per frame, 27 MHz */
- 0xf1, 0x05, /* low bit with 0xF0 */
- 0xf5, 0xad, /* Set pulse generator register */
- 0xf6, 0x01,
-
- 0x87, 0x00, /* Disable I-port output */
- 0x88, 0xd0, /* reset scaler */
- 0x80, 0x20, /* Activate only task "B", continuous mode (was 0xA0) */
- 0x88, 0xf0, /* activate scaler */
- 0x87, 0x01, /* Enable I-port output */
+ R_C0_B_TASK_HANDLING_CNTL, 0x00,
+ R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08,
+ R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00,
+ R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80,
+
+ /* 0x0002 is minimum */
+ R_C4_B_HORIZ_INPUT_WINDOW_START, 0x02,
+ R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
+
+ /* 0x02d0 = 720 */
+ R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
+ R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
+
+ /* vwindow start 0x12 = 18 */
+ R_C8_B_VERT_INPUT_WINDOW_START, 0x12,
+ R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00,
+
+ /* vwindow length 0xf8 = 248 */
+ R_CA_B_VERT_INPUT_WINDOW_LENGTH, 0xf8,
+ R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00,
+
+ /* hwindow 0x02d0 = 720 */
+ R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0,
+ R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02,
+
+ R_F0_LFCO_PER_LINE, 0xad, /* Set PLL Register. 60hz 525 lines per frame, 27 MHz */
+ R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0 */
+ R_F5_PULSGEN_LINE_LENGTH, 0xad,
+ R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01,
+
+ R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00, /* Disable I-port output */
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */
+ R_80_GLOBAL_CNTL_1, 0x20, /* Activate only task "B", continuous mode (was 0xA0) */
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */
+ R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */
0x00, 0x00
};
static const unsigned char saa7115_cfg_50hz_fullres_x[] = {
- 0xcc, 0xd0, /* hsize low (output), 720 same as 60hz */
- 0xcd, 0x02, /* hsize hi (output) */
+ /* hsize low (output), 720 same as 60hz */
+ R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0,
+ R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02,
- 0xd0, 0x01, /* down scale = 1 */
- 0xd8, 0x00, /* hor lum scaling 0x0400 = 1 */
- 0xd9, 0x04,
- 0xdc, 0x00, /* hor chrom scaling 0x0200. must be hor lum scaling / 2 */
- 0xdd, 0x02, /* H-scaling incr chroma */
+ R_D0_B_HORIZ_PRESCALING, 0x01, /* down scale = 1 */
+ R_D8_B_HORIZ_LUMA_SCALING_INC, 0x00, /* hor lum scaling 0x0400 = 1 */
+ R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, 0x04,
+
+ /* must be hor lum scaling / 2 */
+ R_DC_B_HORIZ_CHROMA_SCALING, 0x00,
+ R_DD_B_HORIZ_CHROMA_SCALING_MSB, 0x02,
0x00, 0x00
};
static const unsigned char saa7115_cfg_50hz_fullres_y[] = {
- 0xce, 0x20, /* vsize low (output), 0x0120 = 288 */
- 0xcf, 0x01, /* vsize hi (output) */
+ /* vsize low (output), 0x0120 = 288 */
+ R_CE_B_VERT_OUTPUT_WINDOW_LENGTH, 0x20,
+ R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x01,
+
+ R_D5_B_LUMA_CONTRAST_CNTL, 0x40, /* Lum contrast, nominal value = 0x40 */
+ R_D6_B_CHROMA_SATURATION_CNTL, 0x40, /* Chroma satur. nominal value = 0x80 */
- 0xd5, 0x40, /* Lum contrast, nominal value = 0x40 */
- 0xd6, 0x40, /* Chroma satur. nominal value = 0x80 */
+ R_E0_B_VERT_LUMA_SCALING_INC, 0x00,
+ R_E1_B_VERT_LUMA_SCALING_INC_MSB, 0x04,
- 0xe0, 0x00, /* V-scaling incr luma low */
- 0xe1, 0x04, /* " hi */
- 0xe2, 0x00, /* V-scaling incr chroma low */
- 0xe3, 0x04, /* " hi */
+ R_E2_B_VERT_CHROMA_SCALING_INC, 0x00,
+ R_E3_B_VERT_CHROMA_SCALING_INC_MSB, 0x04,
0x00, 0x00
};
static const unsigned char saa7115_cfg_50hz_video[] = {
- 0x80, 0x00, /* reset tasks */
- 0x88, 0xd0, /* reset scaler */
+ R_80_GLOBAL_CNTL_1, 0x00,
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */
- 0x15, 0x37, /* VGATE start */
- 0x16, 0x16, /* VGATE stop */
- 0x17, 0x99, /* VGATE MSB and other values */
+ R_15_VGATE_START_FID_CHG, 0x37, /* VGATE start */
+ R_16_VGATE_STOP, 0x16,
+ R_17_MISC_VGATE_CONF_AND_MSB, 0x99,
- 0x08, 0x28, /* 0x28 = PAL */
- 0x0e, 0x07, /* chrominance control 1 */
+ R_08_SYNC_CNTL, 0x28, /* 0x28 = PAL */
+ R_0E_CHROMA_CNTL_1, 0x07,
- 0x5a, 0x03, /* Vertical offset, standard 50hz value */
+ R_5A_V_OFF_FOR_SLICER, 0x03, /* standard 50hz value */
/* Task A */
- 0x90, 0x81, /* Task Handling Control */
- 0x91, 0x48, /* X-port formats/config */
- 0x92, 0x40, /* Input Ref. signal Def. */
- 0x93, 0x84, /* I-port config */
+ R_90_A_TASK_HANDLING_CNTL, 0x81,
+ R_91_A_X_PORT_FORMATS_AND_CONF, 0x48,
+ R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL, 0x40,
+ R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF, 0x84,
+
/* This is weird: the datasheet says that you should use 2 as the minimum value, */
/* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */
- 0x94, 0x00, /* hoffset low (input), 0x0002 is minimum */
- 0x95, 0x00, /* hoffset hi (input) */
- 0x96, 0xd0, /* hsize low (input), 0x02d0 = 720 */
- 0x97, 0x02, /* hsize hi (input) */
- 0x98, 0x03, /* voffset low (input) */
- 0x99, 0x00, /* voffset hi (input) */
- 0x9a, 0x12, /* vsize low (input), 0x12 = 18 */
- 0x9b, 0x00, /* vsize hi (input) */
- 0x9c, 0xa0, /* hsize low (output), 0x05a0 = 1440 */
- 0x9d, 0x05, /* hsize hi (output) */
- 0x9e, 0x12, /* vsize low (output), 0x12 = 18 */
- 0x9f, 0x00, /* vsize hi (output) */
+ /* hoffset low (input), 0x0002 is minimum */
+ R_94_A_HORIZ_INPUT_WINDOW_START, 0x00,
+ R_95_A_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
+
+ /* hsize low (input), 0x02d0 = 720 */
+ R_96_A_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
+ R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
+
+ R_98_A_VERT_INPUT_WINDOW_START, 0x03,
+ R_99_A_VERT_INPUT_WINDOW_START_MSB, 0x00,
+
+ /* vsize 0x12 = 18 */
+ R_9A_A_VERT_INPUT_WINDOW_LENGTH, 0x12,
+ R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB, 0x00,
+
+ /* hsize 0x05a0 = 1440 */
+ R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH, 0xa0,
+ R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x05, /* hsize hi (output) */
+ R_9E_A_VERT_OUTPUT_WINDOW_LENGTH, 0x12, /* vsize low (output), 0x12 = 18 */
+ R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x00, /* vsize hi (output) */
/* Task B */
- 0xc0, 0x00, /* Task Handling Control */
- 0xc1, 0x08, /* X-port formats/config */
- 0xc2, 0x00, /* Input Ref. signal Def. */
- 0xc3, 0x80, /* I-port config */
- 0xc4, 0x00, /* hoffset low (input), 0x0002 is minimum. See comment at 0x94 above. */
- 0xc5, 0x00, /* hoffset hi (input) */
- 0xc6, 0xd0, /* hsize low (input), 0x02d0 = 720 */
- 0xc7, 0x02, /* hsize hi (input) */
- 0xc8, 0x16, /* voffset low (input), 0x16 = 22 */
- 0xc9, 0x00, /* voffset hi (input) */
- 0xca, 0x20, /* vsize low (input), 0x0120 = 288 */
- 0xcb, 0x01, /* vsize hi (input) */
- 0xcc, 0xd0, /* hsize low (output), 0x02d0 = 720 */
- 0xcd, 0x02, /* hsize hi (output) */
- 0xce, 0x20, /* vsize low (output), 0x0120 = 288 */
- 0xcf, 0x01, /* vsize hi (output) */
-
- 0xf0, 0xb0, /* Set PLL Register. 50hz 625 lines per frame, 27 MHz */
- 0xf1, 0x05, /* low bit with 0xF0, (was 0x05) */
- 0xf5, 0xb0, /* Set pulse generator register */
- 0xf6, 0x01,
-
- 0x87, 0x00, /* Disable I-port output */
- 0x88, 0xd0, /* reset scaler (was 0xD0) */
- 0x80, 0x20, /* Activate only task "B" */
- 0x88, 0xf0, /* activate scaler */
- 0x87, 0x01, /* Enable I-port output */
+ R_C0_B_TASK_HANDLING_CNTL, 0x00,
+ R_C1_B_X_PORT_FORMATS_AND_CONF, 0x08,
+ R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION, 0x00,
+ R_C3_B_I_PORT_FORMATS_AND_CONF, 0x80,
+
+ /* This is weird: the datasheet says that you should use 2 as the minimum value, */
+ /* but Hauppauge uses 0, and changing that to 2 causes indeed problems (for 50hz) */
+ /* hoffset low (input), 0x0002 is minimum. See comment above. */
+ R_C4_B_HORIZ_INPUT_WINDOW_START, 0x00,
+ R_C5_B_HORIZ_INPUT_WINDOW_START_MSB, 0x00,
+
+ /* hsize 0x02d0 = 720 */
+ R_C6_B_HORIZ_INPUT_WINDOW_LENGTH, 0xd0,
+ R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB, 0x02,
+
+ /* voffset 0x16 = 22 */
+ R_C8_B_VERT_INPUT_WINDOW_START, 0x16,
+ R_C9_B_VERT_INPUT_WINDOW_START_MSB, 0x00,
+
+ /* vsize 0x0120 = 288 */
+ R_CA_B_VERT_INPUT_WINDOW_LENGTH, 0x20,
+ R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB, 0x01,
+
+ /* hsize 0x02d0 = 720 */
+ R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH, 0xd0,
+ R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB, 0x02,
+
+ /* vsize 0x0120 = 288 */
+ R_CE_B_VERT_OUTPUT_WINDOW_LENGTH, 0x20,
+ R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB, 0x01,
+
+ R_F0_LFCO_PER_LINE, 0xb0, /* Set PLL Register. 50hz 625 lines per frame, 27 MHz */
+ R_F1_P_I_PARAM_SELECT, 0x05, /* low bit with 0xF0, (was 0x05) */
+ R_F5_PULSGEN_LINE_LENGTH, 0xb0,
+ R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG, 0x01,
+
+ R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x00, /* Disable I-port output */
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler (was 0xD0) */
+ R_80_GLOBAL_CNTL_1, 0x20, /* Activate only task "B" */
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */
+ R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */
+
0x00, 0x00
};
/* ============== SAA7715 VIDEO templates (end) ======= */
static const unsigned char saa7115_cfg_vbi_on[] = {
- 0x80, 0x00, /* reset tasks */
- 0x88, 0xd0, /* reset scaler */
- 0x80, 0x30, /* Activate both tasks */
- 0x88, 0xf0, /* activate scaler */
- 0x87, 0x01, /* Enable I-port output */
+ R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */
+ R_80_GLOBAL_CNTL_1, 0x30, /* Activate both tasks */
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */
+ R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */
+
0x00, 0x00
};
static const unsigned char saa7115_cfg_vbi_off[] = {
- 0x80, 0x00, /* reset tasks */
- 0x88, 0xd0, /* reset scaler */
- 0x80, 0x20, /* Activate only task "B" */
- 0x88, 0xf0, /* activate scaler */
- 0x87, 0x01, /* Enable I-port output */
+ R_80_GLOBAL_CNTL_1, 0x00, /* reset tasks */
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0, /* reset scaler */
+ R_80_GLOBAL_CNTL_1, 0x20, /* Activate only task "B" */
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0, /* activate scaler */
+ R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01, /* Enable I-port output */
+
0x00, 0x00
};
static const unsigned char saa7113_init_auto_input[] = {
- 0x01, 0x08, /* PH7113_INCREMENT_DELAY - (1) (1) (1) (1) IDEL3 IDEL2 IDELL1 IDEL0 */
- 0x02, 0xc2, /* PH7113_ANALOG_INPUT_CONTR_1 - FUSE1 FUSE0 GUDL1 GUDL0 MODE3 MODE2 MODE1 MODE0 */
- 0x03, 0x30, /* PH7113_ANALOG_INPUT_CONTR_2 - (1) HLNRS VBSL WPOFF HOLDG GAFIX GAI28 GAI18 */
- 0x04, 0x00, /* PH7113_ANALOG_INPUT_CONTR_3 - GAI17 GAI16 GAI15 GAI14 GAI13 GAI12 GAI11 GAI10 */
- 0x05, 0x00, /* PH7113_ANALOG_INPUT_CONTR_4 - GAI27 GAI26 GAI25 GAI24 GAI23 GAI22 GAI21 GAI20 */
- 0x06, 0x89, /* PH7113_HORIZONTAL_SYNC_START - HSB7 HSB6 HSB5 HSB4 HSB3 HSB2 HSB1 HSB0 */
- 0x07, 0x0d, /* PH7113_HORIZONTAL_SYNC_STOP - HSS7 HSS6 HSS5 HSS4 HSS3 HSS2 HSS1 HSS0 */
- 0x08, 0x88, /* PH7113_SYNC_CONTROL - AUFD FSEL FOET HTC1 HTC0 HPLL VNOI1 VNOI0 */
- 0x09, 0x01, /* PH7113_LUMINANCE_CONTROL - BYPS PREF BPSS1 BPSS0 VBLB UPTCV APER1 APER0 */
- 0x0a, 0x80, /* PH7113_LUMINANCE_BRIGHTNESS - BRIG7 BRIG6 BRIG5 BRIG4 BRIG3 BRIG2 BRIG1 BRIG0 */
- 0x0b, 0x47, /* PH7113_LUMINANCE_CONTRAST - CONT7 CONT6 CONT5 CONT4 CONT3 CONT2 CONT1 CONT0 */
- 0x0c, 0x40, /* PH7113_CHROMA_SATURATION - SATN7 SATN6 SATN5 SATN4 SATN3 SATN2 SATN1 SATN0 */
- 0x0d, 0x00, /* PH7113_CHROMA_HUE_CONTROL - HUEC7 HUEC6 HUEC5 HUEC4 HUEC3 HUEC2 HUEC1 HUEC0 */
- 0x0e, 0x01, /* PH7113_CHROMA_CONTROL - CDTO CSTD2 CSTD1 CSTD0 DCCF FCTC CHBW1 CHBW0 */
- 0x0f, 0x2a, /* PH7113_CHROMA_GAIN_CONTROL - ACGC CGAIN6 CGAIN5 CGAIN4 CGAIN3 CGAIN2 CGAIN1 CGAIN0 */
- 0x10, 0x08, /* PH7113_FORMAT_DELAY_CONTROL - OFTS1 OFTS0 HDEL1 HDEL0 VRLN YDEL2 YDEL1 YDEL0 */
- 0x11, 0x0c, /* PH7113_OUTPUT_CONTROL_1 - GPSW1 CM99 GPSW0 HLSEL OEYC OERT VIPB COLO */
- 0x12, 0x07, /* PH7113_OUTPUT_CONTROL_2 - RTSE13 RTSE12 RTSE11 RTSE10 RTSE03 RTSE02 RTSE01 RTSE00 */
- 0x13, 0x00, /* PH7113_OUTPUT_CONTROL_3 - ADLSB (1) (1) OLDSB FIDP (1) AOSL1 AOSL0 */
- 0x14, 0x00, /* RESERVED 14 - (1) (1) (1) (1) (1) (1) (1) (1) */
- 0x15, 0x00, /* PH7113_V_GATE1_START - VSTA7 VSTA6 VSTA5 VSTA4 VSTA3 VSTA2 VSTA1 VSTA0 */
- 0x16, 0x00, /* PH7113_V_GATE1_STOP - VSTO7 VSTO6 VSTO5 VSTO4 VSTO3 VSTO2 VSTO1 VSTO0 */
- 0x17, 0x00, /* PH7113_V_GATE1_MSB - (1) (1) (1) (1) (1) (1) VSTO8 VSTA8 */
+ R_01_INC_DELAY, 0x08,
+ R_02_INPUT_CNTL_1, 0xc2,
+ R_03_INPUT_CNTL_2, 0x30,
+ R_04_INPUT_CNTL_3, 0x00,
+ R_05_INPUT_CNTL_4, 0x00,
+ R_06_H_SYNC_START, 0x89,
+ R_07_H_SYNC_STOP, 0x0d,
+ R_08_SYNC_CNTL, 0x88,
+ R_09_LUMA_CNTL, 0x01,
+ R_0A_LUMA_BRIGHT_CNTL, 0x80,
+ R_0B_LUMA_CONTRAST_CNTL, 0x47,
+ R_0C_CHROMA_SAT_CNTL, 0x40,
+ R_0D_CHROMA_HUE_CNTL, 0x00,
+ R_0E_CHROMA_CNTL_1, 0x01,
+ R_0F_CHROMA_GAIN_CNTL, 0x2a,
+ R_10_CHROMA_CNTL_2, 0x08,
+ R_11_MODE_DELAY_CNTL, 0x0c,
+ R_12_RT_SIGNAL_CNTL, 0x07,
+ R_13_RT_X_PORT_OUT_CNTL, 0x00,
+ R_14_ANAL_ADC_COMPAT_CNTL, 0x00,
+ R_15_VGATE_START_FID_CHG, 0x00,
+ R_16_VGATE_STOP, 0x00,
+ R_17_MISC_VGATE_CONF_AND_MSB, 0x00,
+
0x00, 0x00
};
static const unsigned char saa7115_init_misc[] = {
- 0x81, 0x01, /* reg 0x15,0x16 define blanking window */
- 0x82, 0x00,
- 0x83, 0x01, /* I port settings */
- 0x84, 0x20,
- 0x85, 0x21,
- 0x86, 0xc5,
- 0x87, 0x01,
+ R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F, 0x01,
+ 0x82, 0x00, /* Reserved register - value should be zero*/
+ R_83_X_PORT_I_O_ENA_AND_OUT_CLK, 0x01,
+ R_84_I_PORT_SIGNAL_DEF, 0x20,
+ R_85_I_PORT_SIGNAL_POLAR, 0x21,
+ R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT, 0xc5,
+ R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 0x01,
/* Task A */
- 0xa0, 0x01, /* down scale = 1 */
- 0xa1, 0x00, /* prescale accumulation length = 1 */
- 0xa2, 0x00, /* dc gain and fir prefilter control */
- 0xa4, 0x80, /* Lum Brightness, nominal value = 0x80 */
- 0xa5, 0x40, /* Lum contrast, nominal value = 0x40 */
- 0xa6, 0x40, /* Chroma satur. nominal value = 0x80 */
- 0xa8, 0x00, /* hor lum scaling 0x0200 = 2 zoom */
- 0xa9, 0x02, /* note: 2 x zoom ensures that VBI lines have same length as video lines. */
- 0xaa, 0x00, /* H-phase offset Luma = 0 */
- 0xac, 0x00, /* hor chrom scaling 0x0200. must be hor lum scaling / 2 */
- 0xad, 0x01, /* H-scaling incr chroma */
- 0xae, 0x00, /* H-phase offset chroma. must be offset luma / 2 */
-
- 0xb0, 0x00, /* V-scaling incr luma low */
- 0xb1, 0x04, /* " hi */
- 0xb2, 0x00, /* V-scaling incr chroma low */
- 0xb3, 0x04, /* " hi */
- 0xb4, 0x01, /* V-scaling mode control */
- 0xb8, 0x00, /* V-phase offset chroma 00 */
- 0xb9, 0x00, /* V-phase offset chroma 01 */
- 0xba, 0x00, /* V-phase offset chroma 10 */
- 0xbb, 0x00, /* V-phase offset chroma 11 */
- 0xbc, 0x00, /* V-phase offset luma 00 */
- 0xbd, 0x00, /* V-phase offset luma 01 */
- 0xbe, 0x00, /* V-phase offset luma 10 */
- 0xbf, 0x00, /* V-phase offset luma 11 */
+ R_A0_A_HORIZ_PRESCALING, 0x01,
+ R_A1_A_ACCUMULATION_LENGTH, 0x00,
+ R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00,
+
+ /* Configure controls at nominal value*/
+ R_A4_A_LUMA_BRIGHTNESS_CNTL, 0x80,
+ R_A5_A_LUMA_CONTRAST_CNTL, 0x40,
+ R_A6_A_CHROMA_SATURATION_CNTL, 0x40,
+
+ /* note: 2 x zoom ensures that VBI lines have same length as video lines. */
+ R_A8_A_HORIZ_LUMA_SCALING_INC, 0x00,
+ R_A9_A_HORIZ_LUMA_SCALING_INC_MSB, 0x02,
+
+ R_AA_A_HORIZ_LUMA_PHASE_OFF, 0x00,
+
+ /* must be horiz lum scaling / 2 */
+ R_AC_A_HORIZ_CHROMA_SCALING_INC, 0x00,
+ R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB, 0x01,
+
+ /* must be offset luma / 2 */
+ R_AE_A_HORIZ_CHROMA_PHASE_OFF, 0x00,
+
+ R_B0_A_VERT_LUMA_SCALING_INC, 0x00,
+ R_B1_A_VERT_LUMA_SCALING_INC_MSB, 0x04,
+
+ R_B2_A_VERT_CHROMA_SCALING_INC, 0x00,
+ R_B3_A_VERT_CHROMA_SCALING_INC_MSB, 0x04,
+
+ R_B4_A_VERT_SCALING_MODE_CNTL, 0x01,
+
+ R_B8_A_VERT_CHROMA_PHASE_OFF_00, 0x00,
+ R_B9_A_VERT_CHROMA_PHASE_OFF_01, 0x00,
+ R_BA_A_VERT_CHROMA_PHASE_OFF_10, 0x00,
+ R_BB_A_VERT_CHROMA_PHASE_OFF_11, 0x00,
+
+ R_BC_A_VERT_LUMA_PHASE_OFF_00, 0x00,
+ R_BD_A_VERT_LUMA_PHASE_OFF_01, 0x00,
+ R_BE_A_VERT_LUMA_PHASE_OFF_10, 0x00,
+ R_BF_A_VERT_LUMA_PHASE_OFF_11, 0x00,
/* Task B */
- 0xd0, 0x01, /* down scale = 1 */
- 0xd1, 0x00, /* prescale accumulation length = 1 */
- 0xd2, 0x00, /* dc gain and fir prefilter control */
- 0xd4, 0x80, /* Lum Brightness, nominal value = 0x80 */
- 0xd5, 0x40, /* Lum contrast, nominal value = 0x40 */
- 0xd6, 0x40, /* Chroma satur. nominal value = 0x80 */
- 0xd8, 0x00, /* hor lum scaling 0x0400 = 1 */
- 0xd9, 0x04,
- 0xda, 0x00, /* H-phase offset Luma = 0 */
- 0xdc, 0x00, /* hor chrom scaling 0x0200. must be hor lum scaling / 2 */
- 0xdd, 0x02, /* H-scaling incr chroma */
- 0xde, 0x00, /* H-phase offset chroma. must be offset luma / 2 */
-
- 0xe0, 0x00, /* V-scaling incr luma low */
- 0xe1, 0x04, /* " hi */
- 0xe2, 0x00, /* V-scaling incr chroma low */
- 0xe3, 0x04, /* " hi */
- 0xe4, 0x01, /* V-scaling mode control */
- 0xe8, 0x00, /* V-phase offset chroma 00 */
- 0xe9, 0x00, /* V-phase offset chroma 01 */
- 0xea, 0x00, /* V-phase offset chroma 10 */
- 0xeb, 0x00, /* V-phase offset chroma 11 */
- 0xec, 0x00, /* V-phase offset luma 00 */
- 0xed, 0x00, /* V-phase offset luma 01 */
- 0xee, 0x00, /* V-phase offset luma 10 */
- 0xef, 0x00, /* V-phase offset luma 11 */
-
- 0xf2, 0x50, /* crystal clock = 24.576 MHz, target = 27MHz */
- 0xf3, 0x46,
- 0xf4, 0x00,
- 0xf7, 0x4b, /* not the recommended settings! */
- 0xf8, 0x00,
- 0xf9, 0x4b,
- 0xfa, 0x00,
- 0xfb, 0x4b,
- 0xff, 0x88, /* PLL2 lock detection settings: 71 lines 50% phase error */
+ R_D0_B_HORIZ_PRESCALING, 0x01,
+ R_D1_B_ACCUMULATION_LENGTH, 0x00,
+ R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER, 0x00,
+
+ /* Configure controls at nominal value*/
+ R_D4_B_LUMA_BRIGHTNESS_CNTL, 0x80,
+ R_D5_B_LUMA_CONTRAST_CNTL, 0x40,
+ R_D6_B_CHROMA_SATURATION_CNTL, 0x40,
+
+ /* hor lum scaling 0x0400 = 1 */
+ R_D8_B_HORIZ_LUMA_SCALING_INC, 0x00,
+ R_D9_B_HORIZ_LUMA_SCALING_INC_MSB, 0x04,
+
+ R_DA_B_HORIZ_LUMA_PHASE_OFF, 0x00,
+
+ /* must be hor lum scaling / 2 */
+ R_DC_B_HORIZ_CHROMA_SCALING, 0x00,
+ R_DD_B_HORIZ_CHROMA_SCALING_MSB, 0x02,
+
+ /* must be offset luma / 2 */
+ R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA, 0x00,
+
+ R_E0_B_VERT_LUMA_SCALING_INC, 0x00,
+ R_E1_B_VERT_LUMA_SCALING_INC_MSB, 0x04,
+
+ R_E2_B_VERT_CHROMA_SCALING_INC, 0x00,
+ R_E3_B_VERT_CHROMA_SCALING_INC_MSB, 0x04,
+
+ R_E4_B_VERT_SCALING_MODE_CNTL, 0x01,
+
+ R_E8_B_VERT_CHROMA_PHASE_OFF_00, 0x00,
+ R_E9_B_VERT_CHROMA_PHASE_OFF_01, 0x00,
+ R_EA_B_VERT_CHROMA_PHASE_OFF_10, 0x00,
+ R_EB_B_VERT_CHROMA_PHASE_OFF_11, 0x00,
+
+ R_EC_B_VERT_LUMA_PHASE_OFF_00, 0x00,
+ R_ED_B_VERT_LUMA_PHASE_OFF_01, 0x00,
+ R_EE_B_VERT_LUMA_PHASE_OFF_10, 0x00,
+ R_EF_B_VERT_LUMA_PHASE_OFF_11, 0x00,
+
+ R_F2_NOMINAL_PLL2_DTO, 0x50, /* crystal clock = 24.576 MHz, target = 27MHz */
+ R_F3_PLL_INCREMENT, 0x46,
+ R_F4_PLL2_STATUS, 0x00,
+ R_F7_PULSE_A_POS_MSB, 0x4b, /* not the recommended settings! */
+ R_F8_PULSE_B_POS, 0x00,
+ R_F9_PULSE_B_POS_MSB, 0x4b,
+ R_FA_PULSE_C_POS, 0x00,
+ R_FB_PULSE_C_POS_MSB, 0x4b,
+
+ /* PLL2 lock detection settings: 71 lines 50% phase error */
+ R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES, 0x88,
/* Turn off VBI */
- 0x40, 0x20, /* No framing code errors allowed. */
- 0x41, 0xff,
- 0x42, 0xff,
- 0x43, 0xff,
- 0x44, 0xff,
- 0x45, 0xff,
- 0x46, 0xff,
- 0x47, 0xff,
- 0x48, 0xff,
- 0x49, 0xff,
- 0x4a, 0xff,
- 0x4b, 0xff,
- 0x4c, 0xff,
- 0x4d, 0xff,
- 0x4e, 0xff,
- 0x4f, 0xff,
- 0x50, 0xff,
- 0x51, 0xff,
- 0x52, 0xff,
- 0x53, 0xff,
- 0x54, 0xff,
- 0x55, 0xff,
- 0x56, 0xff,
- 0x57, 0xff,
- 0x58, 0x40,
- 0x59, 0x47,
- 0x5b, 0x83,
- 0x5d, 0xbd,
- 0x5e, 0x35,
-
- 0x02, 0x84, /* input tuner -> input 4, amplifier active */
- 0x09, 0x53, /* 0x53, was 0x56 for 60hz. luminance control */
-
- 0x80, 0x20, /* enable task B */
- 0x88, 0xd0,
- 0x88, 0xf0,
+ R_40_SLICER_CNTL_1, 0x20, /* No framing code errors allowed. */
+ R_41_LCR_BASE, 0xff,
+ R_41_LCR_BASE+1, 0xff,
+ R_41_LCR_BASE+2, 0xff,
+ R_41_LCR_BASE+3, 0xff,
+ R_41_LCR_BASE+4, 0xff,
+ R_41_LCR_BASE+5, 0xff,
+ R_41_LCR_BASE+6, 0xff,
+ R_41_LCR_BASE+7, 0xff,
+ R_41_LCR_BASE+8, 0xff,
+ R_41_LCR_BASE+9, 0xff,
+ R_41_LCR_BASE+10, 0xff,
+ R_41_LCR_BASE+11, 0xff,
+ R_41_LCR_BASE+12, 0xff,
+ R_41_LCR_BASE+13, 0xff,
+ R_41_LCR_BASE+14, 0xff,
+ R_41_LCR_BASE+15, 0xff,
+ R_41_LCR_BASE+16, 0xff,
+ R_41_LCR_BASE+17, 0xff,
+ R_41_LCR_BASE+18, 0xff,
+ R_41_LCR_BASE+19, 0xff,
+ R_41_LCR_BASE+20, 0xff,
+ R_41_LCR_BASE+21, 0xff,
+ R_41_LCR_BASE+22, 0xff,
+ R_58_PROGRAM_FRAMING_CODE, 0x40,
+ R_59_H_OFF_FOR_SLICER, 0x47,
+ R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF, 0x83,
+ R_5D_DID, 0xbd,
+ R_5E_SDID, 0x35,
+
+ R_02_INPUT_CNTL_1, 0x84, /* input tuner -> input 4, amplifier active */
+ R_09_LUMA_CNTL, 0x53, /* 0x53, was 0x56 for 60hz. luminance control */
+
+ R_80_GLOBAL_CNTL_1, 0x20, /* enable task B */
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xd0,
+ R_88_POWER_SAVE_ADC_PORT_CNTL, 0xf0,
0x00, 0x00
};
@@ -617,15 +703,19 @@ static int saa7115_set_audio_clock_freq(struct i2c_client *client, u32 freq)
if (state->apll)
acc |= 0x08;
- saa7115_write(client, 0x38, 0x03);
- saa7115_write(client, 0x39, 0x10);
- saa7115_write(client, 0x3a, acc);
- saa7115_write(client, 0x30, acpf & 0xff);
- saa7115_write(client, 0x31, (acpf >> 8) & 0xff);
- saa7115_write(client, 0x32, (acpf >> 16) & 0x03);
- saa7115_write(client, 0x34, acni & 0xff);
- saa7115_write(client, 0x35, (acni >> 8) & 0xff);
- saa7115_write(client, 0x36, (acni >> 16) & 0x3f);
+ saa7115_write(client, R_38_CLK_RATIO_AMXCLK_TO_ASCLK, 0x03);
+ saa7115_write(client, R_39_CLK_RATIO_ASCLK_TO_ALRCLK, 0x10);
+ saa7115_write(client, R_3A_AUD_CLK_GEN_BASIC_SETUP, acc);
+
+ saa7115_write(client, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD, acpf & 0xff);
+ saa7115_write(client, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+1,
+ (acpf >> 8) & 0xff);
+ saa7115_write(client, R_30_AUD_MAST_CLK_CYCLES_PER_FIELD+2,
+ (acpf >> 16) & 0x03);
+
+ saa7115_write(client, R_34_AUD_MAST_CLK_NOMINAL_INC, acni & 0xff);
+ saa7115_write(client, R_34_AUD_MAST_CLK_NOMINAL_INC+1, (acni >> 8) & 0xff);
+ saa7115_write(client, R_34_AUD_MAST_CLK_NOMINAL_INC+2, (acni >> 16) & 0x3f);
state->audclk_freq = freq;
return 0;
}
@@ -642,7 +732,7 @@ static int saa7115_set_v4lctrl(struct i2c_client *client, struct v4l2_control *c
}
state->bright = ctrl->value;
- saa7115_write(client, 0x0a, state->bright);
+ saa7115_write(client, R_0A_LUMA_BRIGHT_CNTL, state->bright);
break;
case V4L2_CID_CONTRAST:
@@ -652,7 +742,7 @@ static int saa7115_set_v4lctrl(struct i2c_client *client, struct v4l2_control *c
}
state->contrast = ctrl->value;
- saa7115_write(client, 0x0b, state->contrast);
+ saa7115_write(client, R_0B_LUMA_CONTRAST_CNTL, state->contrast);
break;
case V4L2_CID_SATURATION:
@@ -662,7 +752,7 @@ static int saa7115_set_v4lctrl(struct i2c_client *client, struct v4l2_control *c
}
state->sat = ctrl->value;
- saa7115_write(client, 0x0c, state->sat);
+ saa7115_write(client, R_0C_CHROMA_SAT_CNTL, state->sat);
break;
case V4L2_CID_HUE:
@@ -672,7 +762,7 @@ static int saa7115_set_v4lctrl(struct i2c_client *client, struct v4l2_control *c
}
state->hue = ctrl->value;
- saa7115_write(client, 0x0d, state->hue);
+ saa7115_write(client, R_0D_CHROMA_HUE_CNTL, state->hue);
break;
default:
@@ -709,7 +799,7 @@ static int saa7115_get_v4lctrl(struct i2c_client *client, struct v4l2_control *c
static void saa7115_set_v4lstd(struct i2c_client *client, v4l2_std_id std)
{
struct saa7115_state *state = i2c_get_clientdata(client);
- int taskb = saa7115_read(client, 0x80) & 0x10;
+ int taskb = saa7115_read(client, R_80_GLOBAL_CNTL_1) & 0x10;
/* Prevent unnecessary standard changes. During a standard
change the I-Port is temporarily disabled. Any devices
@@ -740,7 +830,7 @@ static void saa7115_set_v4lstd(struct i2c_client *client, v4l2_std_id std)
100 reserved NTSC-Japan (3.58MHz)
*/
if (state->ident == V4L2_IDENT_SAA7113) {
- u8 reg = saa7115_read(client, 0x0e) & 0x8f;
+ u8 reg = saa7115_read(client, R_0E_CHROMA_CNTL_1) & 0x8f;
if (std == V4L2_STD_PAL_M) {
reg |= 0x30;
@@ -751,7 +841,7 @@ static void saa7115_set_v4lstd(struct i2c_client *client, v4l2_std_id std)
} else if (std == V4L2_STD_NTSC_M_JP) {
reg |= 0x40;
}
- saa7115_write(client, 0x0e, reg);
+ saa7115_write(client, R_0E_CHROMA_CNTL_1, reg);
}
@@ -783,7 +873,7 @@ static void saa7115_log_status(struct i2c_client *client)
v4l_info(client, "Audio frequency: %d Hz\n", state->audclk_freq);
if (state->ident != V4L2_IDENT_SAA7115) {
/* status for the saa7114 */
- reg1f = saa7115_read(client, 0x1f);
+ reg1f = saa7115_read(client, R_1F_STATUS_BYTE_2_VD_DEC);
signalOk = (reg1f & 0xc1) == 0x81;
v4l_info(client, "Video signal: %s\n", signalOk ? "ok" : "bad");
v4l_info(client, "Frequency: %s\n", (reg1f & 0x20) ? "60 Hz" : "50 Hz");
@@ -791,8 +881,8 @@ static void saa7115_log_status(struct i2c_client *client)
}
/* status for the saa7115 */
- reg1e = saa7115_read(client, 0x1e);
- reg1f = saa7115_read(client, 0x1f);
+ reg1e = saa7115_read(client, R_1E_STATUS_BYTE_1_VD_DEC);
+ reg1f = saa7115_read(client, R_1F_STATUS_BYTE_2_VD_DEC);
signalOk = (reg1f & 0xc1) == 0x81 && (reg1e & 0xc0) == 0x80;
vcr = !(reg1f & 0x10);
@@ -888,11 +978,13 @@ static void saa7115_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_fo
/* write the lcr registers */
for (i = 2; i <= 23; i++) {
- saa7115_write(client, i - 2 + 0x41, lcr[i]);
+ saa7115_write(client, i - 2 + R_41_LCR_BASE, lcr[i]);
}
/* enable/disable raw VBI capturing */
- saa7115_writeregs(client, fmt->service_set == 0 ? saa7115_cfg_vbi_on : saa7115_cfg_vbi_off);
+ saa7115_writeregs(client, fmt->service_set == 0 ?
+ saa7115_cfg_vbi_on :
+ saa7115_cfg_vbi_off);
}
static int saa7115_get_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt)
@@ -911,10 +1003,10 @@ static int saa7115_get_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt
return -EINVAL;
memset(sliced, 0, sizeof(*sliced));
/* done if using raw VBI */
- if (saa7115_read(client, 0x80) & 0x10)
+ if (saa7115_read(client, R_80_GLOBAL_CNTL_1) & 0x10)
return 0;
for (i = 2; i <= 23; i++) {
- u8 v = saa7115_read(client, i - 2 + 0x41);
+ u8 v = saa7115_read(client, i - 2 + R_41_LCR_BASE);
sliced->service_lines[0][i] = lcr2vbi[v >> 4];
sliced->service_lines[1][i] = lcr2vbi[v & 0xf];
@@ -952,11 +1044,15 @@ static int saa7115_set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt
/* probably have a valid size, let's set it */
/* Set output width/height */
/* width */
- saa7115_write(client, 0xcc, (u8) (pix->width & 0xff));
- saa7115_write(client, 0xcd, (u8) ((pix->width >> 8) & 0xff));
+ saa7115_write(client, R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,
+ (u8) (pix->width & 0xff));
+ saa7115_write(client, R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB,
+ (u8) ((pix->width >> 8) & 0xff));
/* height */
- saa7115_write(client, 0xce, (u8) (pix->height & 0xff));
- saa7115_write(client, 0xcf, (u8) ((pix->height >> 8) & 0xff));
+ saa7115_write(client, R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,
+ (u8) (pix->height & 0xff));
+ saa7115_write(client, R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB,
+ (u8) ((pix->height >> 8) & 0xff));
/* Scaling settings */
/* Hprescaler is floor(inres/outres) */
@@ -970,15 +1066,20 @@ static int saa7115_set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt
v4l_dbg(1, debug, client, "Hpsc: 0x%05x, Hfsc: 0x%05x\n", HPSC, HFSC);
/* FIXME hardcodes to "Task B"
* write H prescaler integer */
- saa7115_write(client, 0xd0, (u8) (HPSC & 0x3f));
+ saa7115_write(client, R_D0_B_HORIZ_PRESCALING,
+ (u8) (HPSC & 0x3f));
/* write H fine-scaling (luminance) */
- saa7115_write(client, 0xd8, (u8) (HFSC & 0xff));
- saa7115_write(client, 0xd9, (u8) ((HFSC >> 8) & 0xff));
+ saa7115_write(client, R_D8_B_HORIZ_LUMA_SCALING_INC,
+ (u8) (HFSC & 0xff));
+ saa7115_write(client, R_D9_B_HORIZ_LUMA_SCALING_INC_MSB,
+ (u8) ((HFSC >> 8) & 0xff));
/* write H fine-scaling (chrominance)
* must be lum/2, so i'll just bitshift :) */
- saa7115_write(client, 0xDC, (u8) ((HFSC >> 1) & 0xff));
- saa7115_write(client, 0xDD, (u8) ((HFSC >> 9) & 0xff));
+ saa7115_write(client, R_DC_B_HORIZ_CHROMA_SCALING,
+ (u8) ((HFSC >> 1) & 0xff));
+ saa7115_write(client, R_DD_B_HORIZ_CHROMA_SCALING_MSB,
+ (u8) ((HFSC >> 9) & 0xff));
} else {
if (is_50hz) {
v4l_dbg(1, debug, client, "Setting full 50hz width\n");
@@ -996,15 +1097,21 @@ static int saa7115_set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt
v4l_dbg(1, debug, client, "Vsrc: %d, Vscy: 0x%05x\n", Vsrc, VSCY);
/* Correct Contrast and Luminance */
- saa7115_write(client, 0xd5, (u8) (64 * 1024 / VSCY));
- saa7115_write(client, 0xd6, (u8) (64 * 1024 / VSCY));
+ saa7115_write(client, R_D5_B_LUMA_CONTRAST_CNTL,
+ (u8) (64 * 1024 / VSCY));
+ saa7115_write(client, R_D6_B_CHROMA_SATURATION_CNTL,
+ (u8) (64 * 1024 / VSCY));
/* write V fine-scaling (luminance) */
- saa7115_write(client, 0xe0, (u8) (VSCY & 0xff));
- saa7115_write(client, 0xe1, (u8) ((VSCY >> 8) & 0xff));
+ saa7115_write(client, R_E0_B_VERT_LUMA_SCALING_INC,
+ (u8) (VSCY & 0xff));
+ saa7115_write(client, R_E1_B_VERT_LUMA_SCALING_INC_MSB,
+ (u8) ((VSCY >> 8) & 0xff));
/* write V fine-scaling (chrominance) */
- saa7115_write(client, 0xe2, (u8) (VSCY & 0xff));
- saa7115_write(client, 0xe3, (u8) ((VSCY >> 8) & 0xff));
+ saa7115_write(client, R_E2_B_VERT_CHROMA_SCALING_INC,
+ (u8) (VSCY & 0xff));
+ saa7115_write(client, R_E3_B_VERT_CHROMA_SCALING_INC_MSB,
+ (u8) ((VSCY >> 8) & 0xff));
} else {
if (is_50hz) {
v4l_dbg(1, debug, client, "Setting full 50Hz height\n");
@@ -1023,7 +1130,7 @@ static int saa7115_set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt
The format is described in the saa7115 datasheet in Tables 25 and 26
and in Figure 33.
The current implementation uses SAV/EAV codes and not the ancillary data
- headers. The vbi->p pointer points to the SDID byte right after the SAV
+ headers. The vbi->p pointer points to the R_5E_SDID byte right after the SAV
code. */
static void saa7115_decode_vbi_line(struct i2c_client *client,
struct v4l2_decode_vbi_line *vbi)
@@ -1113,7 +1220,7 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar
if (state->radio)
break;
- status = saa7115_read(client, 0x1f);
+ status = saa7115_read(client, R_1F_STATUS_BYTE_2_VD_DEC);
v4l_dbg(1, debug, client, "status: 0x%02x\n", status);
vt->signal = ((status & (1 << 6)) == 0) ? 0xffff : 0x0;
@@ -1187,13 +1294,13 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar
state->input = route->input;
/* select mode */
- saa7115_write(client, 0x02,
- (saa7115_read(client, 0x02) & 0xf0) |
+ saa7115_write(client, R_02_INPUT_CNTL_1,
+ (saa7115_read(client, R_02_INPUT_CNTL_1) & 0xf0) |
state->input);
/* bypass chrominance trap for S-Video modes */
- saa7115_write(client, 0x09,
- (saa7115_read(client, 0x09) & 0x7f) |
+ saa7115_write(client, R_09_LUMA_CNTL,
+ (saa7115_read(client, R_09_LUMA_CNTL) & 0x7f) |
(state->input >= SAA7115_SVIDEO0 ? 0x80 : 0x0));
break;
}
@@ -1205,7 +1312,9 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar
if (state->enable != (cmd == VIDIOC_STREAMON)) {
state->enable = (cmd == VIDIOC_STREAMON);
- saa7115_write(client, 0x87, state->enable);
+ saa7115_write(client,
+ R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED,
+ state->enable);
}
break;
@@ -1392,7 +1501,7 @@ static int saa7115_attach(struct i2c_adapter *adapter, int address, int kind)
i2c_attach_client(client);
v4l_dbg(1, debug, client, "status: (1E) 0x%02x, (1F) 0x%02x\n",
- saa7115_read(client, 0x1e), saa7115_read(client, 0x1f));
+ saa7115_read(client, R_1E_STATUS_BYTE_1_VD_DEC), saa7115_read(client, R_1F_STATUS_BYTE_2_VD_DEC));
return 0;
}
diff --git a/drivers/media/video/saa711x_regs.h b/drivers/media/video/saa711x_regs.h
new file mode 100644
index 00000000000..4e5f2eb0a2c
--- /dev/null
+++ b/drivers/media/video/saa711x_regs.h
@@ -0,0 +1,549 @@
+/* saa711x - Philips SAA711x video decoder register specifications
+ *
+ * Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define R_00_CHIP_VERSION 0x00
+/* Video Decoder */
+ /* Video Decoder - Frontend part */
+#define R_01_INC_DELAY 0x01
+#define R_02_INPUT_CNTL_1 0x02
+#define R_03_INPUT_CNTL_2 0x03
+#define R_04_INPUT_CNTL_3 0x04
+#define R_05_INPUT_CNTL_4 0x05
+ /* Video Decoder - Decoder part */
+#define R_06_H_SYNC_START 0x06
+#define R_07_H_SYNC_STOP 0x07
+#define R_08_SYNC_CNTL 0x08
+#define R_09_LUMA_CNTL 0x09
+#define R_0A_LUMA_BRIGHT_CNTL 0x0a
+#define R_0B_LUMA_CONTRAST_CNTL 0x0b
+#define R_0C_CHROMA_SAT_CNTL 0x0c
+#define R_0D_CHROMA_HUE_CNTL 0x0d
+#define R_0E_CHROMA_CNTL_1 0x0e
+#define R_0F_CHROMA_GAIN_CNTL 0x0f
+#define R_10_CHROMA_CNTL_2 0x10
+#define R_11_MODE_DELAY_CNTL 0x11
+#define R_12_RT_SIGNAL_CNTL 0x12
+#define R_13_RT_X_PORT_OUT_CNTL 0x13
+#define R_14_ANAL_ADC_COMPAT_CNTL 0x14
+#define R_15_VGATE_START_FID_CHG 0x15
+#define R_16_VGATE_STOP 0x16
+#define R_17_MISC_VGATE_CONF_AND_MSB 0x17
+#define R_18_RAW_DATA_GAIN_CNTL 0x18
+#define R_19_RAW_DATA_OFF_CNTL 0x19
+#define R_1A_COLOR_KILL_LVL_CNTL 0x1a
+#define R_1B_MISC_TVVCRDET 0x1b
+#define R_1C_ENHAN_COMB_CTRL1 0x1c
+#define R_1D_ENHAN_COMB_CTRL2 0x1d
+#define R_1E_STATUS_BYTE_1_VD_DEC 0x1e
+#define R_1F_STATUS_BYTE_2_VD_DEC 0x1f
+
+/* Component processing and interrupt masking part */
+#define R_23_INPUT_CNTL_5 0x23
+#define R_24_INPUT_CNTL_6 0x24
+#define R_25_INPUT_CNTL_7 0x25
+#define R_29_COMP_DELAY 0x29
+#define R_2A_COMP_BRIGHT_CNTL 0x2a
+#define R_2B_COMP_CONTRAST_CNTL 0x2b
+#define R_2C_COMP_SAT_CNTL 0x2c
+#define R_2D_INTERRUPT_MASK_1 0x2d
+#define R_2E_INTERRUPT_MASK_2 0x2e
+#define R_2F_INTERRUPT_MASK_3 0x2f
+
+/* Audio clock generator part */
+#define R_30_AUD_MAST_CLK_CYCLES_PER_FIELD 0x30
+#define R_34_AUD_MAST_CLK_NOMINAL_INC 0x34
+#define R_38_CLK_RATIO_AMXCLK_TO_ASCLK 0x38
+#define R_39_CLK_RATIO_ASCLK_TO_ALRCLK 0x39
+#define R_3A_AUD_CLK_GEN_BASIC_SETUP 0x3a
+
+/* General purpose VBI data slicer part */
+#define R_40_SLICER_CNTL_1 0x40
+#define R_41_LCR_BASE 0x41
+#define R_58_PROGRAM_FRAMING_CODE 0x58
+#define R_59_H_OFF_FOR_SLICER 0x59
+#define R_5A_V_OFF_FOR_SLICER 0x5a
+#define R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF 0x5b
+#define R_5D_DID 0x5d
+#define R_5E_SDID 0x5e
+#define R_60_SLICER_STATUS_BYTE_0 0x60
+#define R_61_SLICER_STATUS_BYTE_1 0x61
+#define R_62_SLICER_STATUS_BYTE_2 0x62
+
+/* X port, I port and the scaler part */
+ /* Task independent global settings */
+#define R_80_GLOBAL_CNTL_1 0x80
+#define R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F 0x81
+#define R_83_X_PORT_I_O_ENA_AND_OUT_CLK 0x83
+#define R_84_I_PORT_SIGNAL_DEF 0x84
+#define R_85_I_PORT_SIGNAL_POLAR 0x85
+#define R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT 0x86
+#define R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED 0x87
+#define R_88_POWER_SAVE_ADC_PORT_CNTL 0x88
+#define R_8F_STATUS_INFO_SCALER 0x8f
+ /* Task A definition */
+ /* Basic settings and acquisition window definition */
+#define R_90_A_TASK_HANDLING_CNTL 0x90
+#define R_91_A_X_PORT_FORMATS_AND_CONF 0x91
+#define R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL 0x92
+#define R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF 0x93
+#define R_94_A_HORIZ_INPUT_WINDOW_START 0x94
+#define R_95_A_HORIZ_INPUT_WINDOW_START_MSB 0x95
+#define R_96_A_HORIZ_INPUT_WINDOW_LENGTH 0x96
+#define R_97_A_HORIZ_INPUT_WINDOW_LENGTH_MSB 0x97
+#define R_98_A_VERT_INPUT_WINDOW_START 0x98
+#define R_99_A_VERT_INPUT_WINDOW_START_MSB 0x99
+#define R_9A_A_VERT_INPUT_WINDOW_LENGTH 0x9a
+#define R_9B_A_VERT_INPUT_WINDOW_LENGTH_MSB 0x9b
+#define R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH 0x9c
+#define R_9D_A_HORIZ_OUTPUT_WINDOW_LENGTH_MSB 0x9d
+#define R_9E_A_VERT_OUTPUT_WINDOW_LENGTH 0x9e
+#define R_9F_A_VERT_OUTPUT_WINDOW_LENGTH_MSB 0x9f
+ /* FIR filtering and prescaling */
+#define R_A0_A_HORIZ_PRESCALING 0xa0
+#define R_A1_A_ACCUMULATION_LENGTH 0xa1
+#define R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER 0xa2
+#define R_A4_A_LUMA_BRIGHTNESS_CNTL 0xa4
+#define R_A5_A_LUMA_CONTRAST_CNTL 0xa5
+#define R_A6_A_CHROMA_SATURATION_CNTL 0xa6
+ /* Horizontal phase scaling */
+#define R_A8_A_HORIZ_LUMA_SCALING_INC 0xa8
+#define R_A9_A_HORIZ_LUMA_SCALING_INC_MSB 0xa9
+#define R_AA_A_HORIZ_LUMA_PHASE_OFF 0xaa
+#define R_AC_A_HORIZ_CHROMA_SCALING_INC 0xac
+#define R_AD_A_HORIZ_CHROMA_SCALING_INC_MSB 0xad
+#define R_AE_A_HORIZ_CHROMA_PHASE_OFF 0xae
+#define R_AF_A_HORIZ_CHROMA_PHASE_OFF_MSB 0xaf
+ /* Vertical scaling */
+#define R_B0_A_VERT_LUMA_SCALING_INC 0xb0
+#define R_B1_A_VERT_LUMA_SCALING_INC_MSB 0xb1
+#define R_B2_A_VERT_CHROMA_SCALING_INC 0xb2
+#define R_B3_A_VERT_CHROMA_SCALING_INC_MSB 0xb3
+#define R_B4_A_VERT_SCALING_MODE_CNTL 0xb4
+#define R_B8_A_VERT_CHROMA_PHASE_OFF_00 0xb8
+#define R_B9_A_VERT_CHROMA_PHASE_OFF_01 0xb9
+#define R_BA_A_VERT_CHROMA_PHASE_OFF_10 0xba
+#define R_BB_A_VERT_CHROMA_PHASE_OFF_11 0xbb
+#define R_BC_A_VERT_LUMA_PHASE_OFF_00 0xbc
+#define R_BD_A_VERT_LUMA_PHASE_OFF_01 0xbd
+#define R_BE_A_VERT_LUMA_PHASE_OFF_10 0xbe
+#define R_BF_A_VERT_LUMA_PHASE_OFF_11 0xbf
+ /* Task B definition */
+ /* Basic settings and acquisition window definition */
+#define R_C0_B_TASK_HANDLING_CNTL 0xc0
+#define R_C1_B_X_PORT_FORMATS_AND_CONF 0xc1
+#define R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION 0xc2
+#define R_C3_B_I_PORT_FORMATS_AND_CONF 0xc3
+#define R_C4_B_HORIZ_INPUT_WINDOW_START 0xc4
+#define R_C5_B_HORIZ_INPUT_WINDOW_START_MSB 0xc5
+#define R_C6_B_HORIZ_INPUT_WINDOW_LENGTH 0xc6
+#define R_C7_B_HORIZ_INPUT_WINDOW_LENGTH_MSB 0xc7
+#define R_C8_B_VERT_INPUT_WINDOW_START 0xc8
+#define R_C9_B_VERT_INPUT_WINDOW_START_MSB 0xc9
+#define R_CA_B_VERT_INPUT_WINDOW_LENGTH 0xca
+#define R_CB_B_VERT_INPUT_WINDOW_LENGTH_MSB 0xcb
+#define R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH 0xcc
+#define R_CD_B_HORIZ_OUTPUT_WINDOW_LENGTH_MSB 0xcd
+#define R_CE_B_VERT_OUTPUT_WINDOW_LENGTH 0xce
+#define R_CF_B_VERT_OUTPUT_WINDOW_LENGTH_MSB 0xcf
+ /* FIR filtering and prescaling */
+#define R_D0_B_HORIZ_PRESCALING 0xd0
+#define R_D1_B_ACCUMULATION_LENGTH 0xd1
+#define R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER 0xd2
+#define R_D4_B_LUMA_BRIGHTNESS_CNTL 0xd4
+#define R_D5_B_LUMA_CONTRAST_CNTL 0xd5
+#define R_D6_B_CHROMA_SATURATION_CNTL 0xd6
+ /* Horizontal phase scaling */
+#define R_D8_B_HORIZ_LUMA_SCALING_INC 0xd8
+#define R_D9_B_HORIZ_LUMA_SCALING_INC_MSB 0xd9
+#define R_DA_B_HORIZ_LUMA_PHASE_OFF 0xda
+#define R_DC_B_HORIZ_CHROMA_SCALING 0xdc
+#define R_DD_B_HORIZ_CHROMA_SCALING_MSB 0xdd
+#define R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA 0xde
+ /* Vertical scaling */
+#define R_E0_B_VERT_LUMA_SCALING_INC 0xe0
+#define R_E1_B_VERT_LUMA_SCALING_INC_MSB 0xe1
+#define R_E2_B_VERT_CHROMA_SCALING_INC 0xe2
+#define R_E3_B_VERT_CHROMA_SCALING_INC_MSB 0xe3
+#define R_E4_B_VERT_SCALING_MODE_CNTL 0xe4
+#define R_E8_B_VERT_CHROMA_PHASE_OFF_00 0xe8
+#define R_E9_B_VERT_CHROMA_PHASE_OFF_01 0xe9
+#define R_EA_B_VERT_CHROMA_PHASE_OFF_10 0xea
+#define R_EB_B_VERT_CHROMA_PHASE_OFF_11 0xeb
+#define R_EC_B_VERT_LUMA_PHASE_OFF_00 0xec
+#define R_ED_B_VERT_LUMA_PHASE_OFF_01 0xed
+#define R_EE_B_VERT_LUMA_PHASE_OFF_10 0xee
+#define R_EF_B_VERT_LUMA_PHASE_OFF_11 0xef
+
+/* second PLL (PLL2) and Pulsegenerator Programming */
+#define R_F0_LFCO_PER_LINE 0xf0
+#define R_F1_P_I_PARAM_SELECT 0xf1
+#define R_F2_NOMINAL_PLL2_DTO 0xf2
+#define R_F3_PLL_INCREMENT 0xf3
+#define R_F4_PLL2_STATUS 0xf4
+#define R_F5_PULSGEN_LINE_LENGTH 0xf5
+#define R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG 0xf6
+#define R_F7_PULSE_A_POS_MSB 0xf7
+#define R_F8_PULSE_B_POS 0xf8
+#define R_F9_PULSE_B_POS_MSB 0xf9
+#define R_FA_PULSE_C_POS 0xfa
+#define R_FB_PULSE_C_POS_MSB 0xfb
+#define R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES 0xff
+
+#if 0
+/* Those structs will be used in the future for debug purposes */
+struct saa711x_reg_descr {
+ u8 reg;
+ int count;
+ char *name;
+};
+
+struct saa711x_reg_descr saa711x_regs[] = {
+ /* REG COUNT NAME */
+ {R_00_CHIP_VERSION,1,
+ "Chip version"},
+
+ /* Video Decoder: R_01_INC_DELAY to R_1F_STATUS_BYTE_2_VD_DEC */
+
+ /* Video Decoder - Frontend part: R_01_INC_DELAY to R_05_INPUT_CNTL_4 */
+ {R_01_INC_DELAY,1,
+ "Increment delay"},
+ {R_02_INPUT_CNTL_1,1,
+ "Analog input control 1"},
+ {R_03_INPUT_CNTL_2,1,
+ "Analog input control 2"},
+ {R_04_INPUT_CNTL_3,1,
+ "Analog input control 3"},
+ {R_05_INPUT_CNTL_4,1,
+ "Analog input control 4"},
+
+ /* Video Decoder - Decoder part: R_06_H_SYNC_START to R_1F_STATUS_BYTE_2_VD_DEC */
+ {R_06_H_SYNC_START,1,
+ "Horizontal sync start"},
+ {R_07_H_SYNC_STOP,1,
+ "Horizontal sync stop"},
+ {R_08_SYNC_CNTL,1,
+ "Sync control"},
+ {R_09_LUMA_CNTL,1,
+ "Luminance control"},
+ {R_0A_LUMA_BRIGHT_CNTL,1,
+ "Luminance brightness control"},
+ {R_0B_LUMA_CONTRAST_CNTL,1,
+ "Luminance contrast control"},
+ {R_0C_CHROMA_SAT_CNTL,1,
+ "Chrominance saturation control"},
+ {R_0D_CHROMA_HUE_CNTL,1,
+ "Chrominance hue control"},
+ {R_0E_CHROMA_CNTL_1,1,
+ "Chrominance control 1"},
+ {R_0F_CHROMA_GAIN_CNTL,1,
+ "Chrominance gain control"},
+ {R_10_CHROMA_CNTL_2,1,
+ "Chrominance control 2"},
+ {R_11_MODE_DELAY_CNTL,1,
+ "Mode/delay control"},
+ {R_12_RT_SIGNAL_CNTL,1,
+ "RT signal control"},
+ {R_13_RT_X_PORT_OUT_CNTL,1,
+ "RT/X port output control"},
+ {R_14_ANAL_ADC_COMPAT_CNTL,1,
+ "Analog/ADC/compatibility control"},
+ {R_15_VGATE_START_FID_CHG, 1,
+ "VGATE start FID change"},
+ {R_16_VGATE_STOP,1,
+ "VGATE stop"},
+ {R_17_MISC_VGATE_CONF_AND_MSB, 1,
+ "Miscellaneous VGATE configuration and MSBs"},
+ {R_18_RAW_DATA_GAIN_CNTL,1,
+ "Raw data gain control",},
+ {R_19_RAW_DATA_OFF_CNTL,1,
+ "Raw data offset control",},
+ {R_1A_COLOR_KILL_LVL_CNTL,1,
+ "Color Killer Level Control"},
+ { R_1B_MISC_TVVCRDET, 1,
+ "MISC /TVVCRDET"},
+ { R_1C_ENHAN_COMB_CTRL1, 1,
+ "Enhanced comb ctrl1"},
+ { R_1D_ENHAN_COMB_CTRL2, 1,
+ "Enhanced comb ctrl1"},
+ {R_1E_STATUS_BYTE_1_VD_DEC,1,
+ "Status byte 1 video decoder"},
+ {R_1F_STATUS_BYTE_2_VD_DEC,1,
+ "Status byte 2 video decoder"},
+
+ /* Component processing and interrupt masking part: 0x20h to R_2F_INTERRUPT_MASK_3 */
+ /* 0x20 to 0x22 - Reserved */
+ {R_23_INPUT_CNTL_5,1,
+ "Analog input control 5"},
+ {R_24_INPUT_CNTL_6,1,
+ "Analog input control 6"},
+ {R_25_INPUT_CNTL_7,1,
+ "Analog input control 7"},
+ /* 0x26 to 0x28 - Reserved */
+ {R_29_COMP_DELAY,1,
+ "Component delay"},
+ {R_2A_COMP_BRIGHT_CNTL,1,
+ "Component brightness control"},
+ {R_2B_COMP_CONTRAST_CNTL,1,
+ "Component contrast control"},
+ {R_2C_COMP_SAT_CNTL,1,
+ "Component saturation control"},
+ {R_2D_INTERRUPT_MASK_1,1,
+ "Interrupt mask 1"},
+ {R_2E_INTERRUPT_MASK_2,1,
+ "Interrupt mask 2"},
+ {R_2F_INTERRUPT_MASK_3,1,
+ "Interrupt mask 3"},
+
+ /* Audio clock generator part: R_30_AUD_MAST_CLK_CYCLES_PER_FIELD to 0x3f */
+ {R_30_AUD_MAST_CLK_CYCLES_PER_FIELD,3,
+ "Audio master clock cycles per field"},
+ /* 0x33 - Reserved */
+ {R_34_AUD_MAST_CLK_NOMINAL_INC,3,
+ "Audio master clock nominal increment"},
+ /* 0x37 - Reserved */
+ {R_38_CLK_RATIO_AMXCLK_TO_ASCLK,1,
+ "Clock ratio AMXCLK to ASCLK"},
+ {R_39_CLK_RATIO_ASCLK_TO_ALRCLK,1,
+ "Clock ratio ASCLK to ALRCLK"},
+ {R_3A_AUD_CLK_GEN_BASIC_SETUP,1,
+ "Audio clock generator basic setup"},
+ /* 0x3b-0x3f - Reserved */
+
+ /* General purpose VBI data slicer part: R_40_SLICER_CNTL_1 to 0x7f */
+ {R_40_SLICER_CNTL_1,1,
+ "Slicer control 1"},
+ {R_41_LCR,23,
+ "R_41_LCR"},
+ {R_58_PROGRAM_FRAMING_CODE,1,
+ "Programmable framing code"},
+ {R_59_H_OFF_FOR_SLICER,1,
+ "Horizontal offset for slicer"},
+ {R_5A_V_OFF_FOR_SLICER,1,
+ "Vertical offset for slicer"},
+ {R_5B_FLD_OFF_AND_MSB_FOR_H_AND_V_OFF,1,
+ "Field offset and MSBs for horizontal and vertical offset"},
+ {R_5D_DID,1,
+ "Header and data identification (R_5D_DID)"},
+ {R_5E_SDID,1,
+ "Sliced data identification (R_5E_SDID) code"},
+ {R_60_SLICER_STATUS_BYTE_0,1,
+ "Slicer status byte 0"},
+ {R_61_SLICER_STATUS_BYTE_1,1,
+ "Slicer status byte 1"},
+ {R_62_SLICER_STATUS_BYTE_2,1,
+ "Slicer status byte 2"},
+ /* 0x63-0x7f - Reserved */
+
+ /* X port, I port and the scaler part: R_80_GLOBAL_CNTL_1 to R_EF_B_VERT_LUMA_PHASE_OFF_11 */
+ /* Task independent global settings: R_80_GLOBAL_CNTL_1 to R_8F_STATUS_INFO_SCALER */
+ {R_80_GLOBAL_CNTL_1,1,
+ "Global control 1"},
+ {R_81_V_SYNC_FLD_ID_SRC_SEL_AND_RETIMED_V_F,1,
+ "Vertical sync and Field ID source selection, retimed V and F signals"},
+ /* 0x82 - Reserved */
+ {R_83_X_PORT_I_O_ENA_AND_OUT_CLK,1,
+ "X port I/O enable and output clock"},
+ {R_84_I_PORT_SIGNAL_DEF,1,
+ "I port signal definitions"},
+ {R_85_I_PORT_SIGNAL_POLAR,1,
+ "I port signal polarities"},
+ {R_86_I_PORT_FIFO_FLAG_CNTL_AND_ARBIT,1,
+ "I port FIFO flag control and arbitration"},
+ {R_87_I_PORT_I_O_ENA_OUT_CLK_AND_GATED, 1,
+ "I port I/O enable output clock and gated"},
+ {R_88_POWER_SAVE_ADC_PORT_CNTL,1,
+ "Power save/ADC port control"},
+ /* 089-0x8e - Reserved */
+ {R_8F_STATUS_INFO_SCALER,1,
+ "Status information scaler part"},
+
+ /* Task A definition: R_90_A_TASK_HANDLING_CNTL to R_BF_A_VERT_LUMA_PHASE_OFF_11 */
+ /* Task A: Basic settings and acquisition window definition */
+ {R_90_A_TASK_HANDLING_CNTL,1,
+ "Task A: Task handling control"},
+ {R_91_A_X_PORT_FORMATS_AND_CONF,1,
+ "Task A: X port formats and configuration"},
+ {R_92_A_X_PORT_INPUT_REFERENCE_SIGNAL,1,
+ "Task A: X port input reference signal definition"},
+ {R_93_A_I_PORT_OUTPUT_FORMATS_AND_CONF,1,
+ "Task A: I port output formats and configuration"},
+ {R_94_A_HORIZ_INPUT_WINDOW_START,2,
+ "Task A: Horizontal input window start"},
+ {R_96_A_HORIZ_INPUT_WINDOW_LENGTH,2,
+ "Task A: Horizontal input window length"},
+ {R_98_A_VERT_INPUT_WINDOW_START,2,
+ "Task A: Vertical input window start"},
+ {R_9A_A_VERT_INPUT_WINDOW_LENGTH,2,
+ "Task A: Vertical input window length"},
+ {R_9C_A_HORIZ_OUTPUT_WINDOW_LENGTH,2,
+ "Task A: Horizontal output window length"},
+ {R_9E_A_VERT_OUTPUT_WINDOW_LENGTH,2,
+ "Task A: Vertical output window length"},
+
+ /* Task A: FIR filtering and prescaling */
+ {R_A0_A_HORIZ_PRESCALING,1,
+ "Task A: Horizontal prescaling"},
+ {R_A1_A_ACCUMULATION_LENGTH,1,
+ "Task A: Accumulation length"},
+ {R_A2_A_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1,
+ "Task A: Prescaler DC gain and FIR prefilter"},
+ /* 0xa3 - Reserved */
+ {R_A4_A_LUMA_BRIGHTNESS_CNTL,1,
+ "Task A: Luminance brightness control"},
+ {R_A5_A_LUMA_CONTRAST_CNTL,1,
+ "Task A: Luminance contrast control"},
+ {R_A6_A_CHROMA_SATURATION_CNTL,1,
+ "Task A: Chrominance saturation control"},
+ /* 0xa7 - Reserved */
+
+ /* Task A: Horizontal phase scaling */
+ {R_A8_A_HORIZ_LUMA_SCALING_INC,2,
+ "Task A: Horizontal luminance scaling increment"},
+ {R_AA_A_HORIZ_LUMA_PHASE_OFF,1,
+ "Task A: Horizontal luminance phase offset"},
+ /* 0xab - Reserved */
+ {R_AC_A_HORIZ_CHROMA_SCALING_INC,2,
+ "Task A: Horizontal chrominance scaling increment"},
+ {R_AE_A_HORIZ_CHROMA_PHASE_OFF,1,
+ "Task A: Horizontal chrominance phase offset"},
+ /* 0xaf - Reserved */
+
+ /* Task A: Vertical scaling */
+ {R_B0_A_VERT_LUMA_SCALING_INC,2,
+ "Task A: Vertical luminance scaling increment"},
+ {R_B2_A_VERT_CHROMA_SCALING_INC,2,
+ "Task A: Vertical chrominance scaling increment"},
+ {R_B4_A_VERT_SCALING_MODE_CNTL,1,
+ "Task A: Vertical scaling mode control"},
+ /* 0xb5-0xb7 - Reserved */
+ {R_B8_A_VERT_CHROMA_PHASE_OFF_00,1,
+ "Task A: Vertical chrominance phase offset '00'"},
+ {R_B9_A_VERT_CHROMA_PHASE_OFF_01,1,
+ "Task A: Vertical chrominance phase offset '01'"},
+ {R_BA_A_VERT_CHROMA_PHASE_OFF_10,1,
+ "Task A: Vertical chrominance phase offset '10'"},
+ {R_BB_A_VERT_CHROMA_PHASE_OFF_11,1,
+ "Task A: Vertical chrominance phase offset '11'"},
+ {R_BC_A_VERT_LUMA_PHASE_OFF_00,1,
+ "Task A: Vertical luminance phase offset '00'"},
+ {R_BD_A_VERT_LUMA_PHASE_OFF_01,1,
+ "Task A: Vertical luminance phase offset '01'"},
+ {R_BE_A_VERT_LUMA_PHASE_OFF_10,1,
+ "Task A: Vertical luminance phase offset '10'"},
+ {R_BF_A_VERT_LUMA_PHASE_OFF_11,1,
+ "Task A: Vertical luminance phase offset '11'"},
+
+ /* Task B definition: R_C0_B_TASK_HANDLING_CNTL to R_EF_B_VERT_LUMA_PHASE_OFF_11 */
+ /* Task B: Basic settings and acquisition window definition */
+ {R_C0_B_TASK_HANDLING_CNTL,1,
+ "Task B: Task handling control"},
+ {R_C1_B_X_PORT_FORMATS_AND_CONF,1,
+ "Task B: X port formats and configuration"},
+ {R_C2_B_INPUT_REFERENCE_SIGNAL_DEFINITION,1,
+ "Task B: Input reference signal definition"},
+ {R_C3_B_I_PORT_FORMATS_AND_CONF,1,
+ "Task B: I port formats and configuration"},
+ {R_C4_B_HORIZ_INPUT_WINDOW_START,2,
+ "Task B: Horizontal input window start"},
+ {R_C6_B_HORIZ_INPUT_WINDOW_LENGTH,2,
+ "Task B: Horizontal input window length"},
+ {R_C8_B_VERT_INPUT_WINDOW_START,2,
+ "Task B: Vertical input window start"},
+ {R_CA_B_VERT_INPUT_WINDOW_LENGTH,2,
+ "Task B: Vertical input window length"},
+ {R_CC_B_HORIZ_OUTPUT_WINDOW_LENGTH,2,
+ "Task B: Horizontal output window length"},
+ {R_CE_B_VERT_OUTPUT_WINDOW_LENGTH,2,
+ "Task B: Vertical output window length"},
+
+ /* Task B: FIR filtering and prescaling */
+ {R_D0_B_HORIZ_PRESCALING,1,
+ "Task B: Horizontal prescaling"},
+ {R_D1_B_ACCUMULATION_LENGTH,1,
+ "Task B: Accumulation length"},
+ {R_D2_B_PRESCALER_DC_GAIN_AND_FIR_PREFILTER,1,
+ "Task B: Prescaler DC gain and FIR prefilter"},
+ /* 0xd3 - Reserved */
+ {R_D4_B_LUMA_BRIGHTNESS_CNTL,1,
+ "Task B: Luminance brightness control"},
+ {R_D5_B_LUMA_CONTRAST_CNTL,1,
+ "Task B: Luminance contrast control"},
+ {R_D6_B_CHROMA_SATURATION_CNTL,1,
+ "Task B: Chrominance saturation control"},
+ /* 0xd7 - Reserved */
+
+ /* Task B: Horizontal phase scaling */
+ {R_D8_B_HORIZ_LUMA_SCALING_INC,2,
+ "Task B: Horizontal luminance scaling increment"},
+ {R_DA_B_HORIZ_LUMA_PHASE_OFF,1,
+ "Task B: Horizontal luminance phase offset"},
+ /* 0xdb - Reserved */
+ {R_DC_B_HORIZ_CHROMA_SCALING,2,
+ "Task B: Horizontal chrominance scaling"},
+ {R_DE_B_HORIZ_PHASE_OFFSET_CRHOMA,1,
+ "Task B: Horizontal Phase Offset Chroma"},
+ /* 0xdf - Reserved */
+
+ /* Task B: Vertical scaling */
+ {R_E0_B_VERT_LUMA_SCALING_INC,2,
+ "Task B: Vertical luminance scaling increment"},
+ {R_E2_B_VERT_CHROMA_SCALING_INC,2,
+ "Task B: Vertical chrominance scaling increment"},
+ {R_E4_B_VERT_SCALING_MODE_CNTL,1,
+ "Task B: Vertical scaling mode control"},
+ /* 0xe5-0xe7 - Reserved */
+ {R_E8_B_VERT_CHROMA_PHASE_OFF_00,1,
+ "Task B: Vertical chrominance phase offset '00'"},
+ {R_E9_B_VERT_CHROMA_PHASE_OFF_01,1,
+ "Task B: Vertical chrominance phase offset '01'"},
+ {R_EA_B_VERT_CHROMA_PHASE_OFF_10,1,
+ "Task B: Vertical chrominance phase offset '10'"},
+ {R_EB_B_VERT_CHROMA_PHASE_OFF_11,1,
+ "Task B: Vertical chrominance phase offset '11'"},
+ {R_EC_B_VERT_LUMA_PHASE_OFF_00,1,
+ "Task B: Vertical luminance phase offset '00'"},
+ {R_ED_B_VERT_LUMA_PHASE_OFF_01,1,
+ "Task B: Vertical luminance phase offset '01'"},
+ {R_EE_B_VERT_LUMA_PHASE_OFF_10,1,
+ "Task B: Vertical luminance phase offset '10'"},
+ {R_EF_B_VERT_LUMA_PHASE_OFF_11,1,
+ "Task B: Vertical luminance phase offset '11'"},
+
+ /* second PLL (PLL2) and Pulsegenerator Programming */
+ { R_F0_LFCO_PER_LINE, 1,
+ "LFCO's per line"},
+ { R_F1_P_I_PARAM_SELECT,1,
+ "P-/I- Param. Select., PLL Mode, PLL H-Src., LFCO's per line"},
+ { R_F2_NOMINAL_PLL2_DTO,1,
+ "Nominal PLL2 DTO"},
+ {R_F3_PLL_INCREMENT,1,
+ "PLL2 Increment"},
+ {R_F4_PLL2_STATUS,1,
+ "PLL2 Status"},
+ {R_F5_PULSGEN_LINE_LENGTH,1,
+ "Pulsgen. line length"},
+ {R_F6_PULSE_A_POS_LSB_AND_PULSEGEN_CONFIG,1,
+ "Pulse A Position, Pulsgen Resync., Pulsgen. H-Src., Pulsgen. line length"},
+ {R_F7_PULSE_A_POS_MSB,1,
+ "Pulse A Position"},
+ {R_F8_PULSE_B_POS,2,
+ "Pulse B Position"},
+ {R_FA_PULSE_C_POS,2,
+ "Pulse C Position"},
+ /* 0xfc to 0xfe - Reserved */
+ {R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES,1,
+ "S_PLL max. phase, error threshold, PLL2 no. of lines, threshold"},
+};
+#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 20:46:47 +0000