diff options
Diffstat (limited to 'drivers')
331 files changed, 32642 insertions, 15009 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 0400a52d508..670fdb5142d 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -40,13 +40,12 @@ config ACPI available at: <http://www.acpi.info> +if ACPI + config ACPI_BOOT bool - depends on ACPI || X86_HT default y -if ACPI - config ACPI_INTERPRETER bool depends on !IA64_SGI_SN diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index 12b0eea6340..8093f2e0032 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -391,7 +391,6 @@ acpi_pci_irq_enable ( u8 pin = 0; int edge_level = ACPI_LEVEL_SENSITIVE; int active_high_low = ACPI_ACTIVE_LOW; - extern int via_interrupt_line_quirk; char *link = NULL; ACPI_FUNCTION_TRACE("acpi_pci_irq_enable"); @@ -444,9 +443,6 @@ acpi_pci_irq_enable ( } } - if (via_interrupt_line_quirk) - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq & 15); - dev->irq = acpi_register_gsi(irq, edge_level, active_high_low); printk(KERN_INFO PREFIX "PCI Interrupt %s[%c] -> ", diff --git a/drivers/atm/Makefile b/drivers/atm/Makefile index d1dcd8eae3c..5b77188527a 100644 --- a/drivers/atm/Makefile +++ b/drivers/atm/Makefile @@ -39,7 +39,8 @@ ifeq ($(CONFIG_ATM_FORE200E_PCA),y) fore_200e-objs += fore200e_pca_fw.o # guess the target endianess to choose the right PCA-200E firmware image ifeq ($(CONFIG_ATM_FORE200E_PCA_DEFAULT_FW),y) - CONFIG_ATM_FORE200E_PCA_FW = $(shell if test -n "`$(CC) -E -dM $(src)/../../include/asm/byteorder.h | grep ' __LITTLE_ENDIAN '`"; then echo $(obj)/pca200e.bin; else echo $(obj)/pca200e_ecd.bin2; fi) + byteorder.h := include$(if $(patsubst $(srctree),,$(objtree)),2)/asm/byteorder.h + CONFIG_ATM_FORE200E_PCA_FW := $(obj)/pca200e$(if $(shell $(CC) -E -dM $(byteorder.h) | grep ' __LITTLE_ENDIAN '),.bin,_ecd.bin2) endif endif diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c index 9e65bfb85ba..5f702199543 100644 --- a/drivers/atm/fore200e.c +++ b/drivers/atm/fore200e.c @@ -383,8 +383,7 @@ fore200e_shutdown(struct fore200e* fore200e) switch(fore200e->state) { case FORE200E_STATE_COMPLETE: - if (fore200e->stats) - kfree(fore200e->stats); + kfree(fore200e->stats); case FORE200E_STATE_IRQ: free_irq(fore200e->irq, fore200e->atm_dev); @@ -963,8 +962,7 @@ fore200e_tx_irq(struct fore200e* fore200e) entry, txq->tail, entry->vc_map, entry->skb); /* free copy of misaligned data */ - if (entry->data) - kfree(entry->data); + kfree(entry->data); /* remove DMA mapping */ fore200e->bus->dma_unmap(fore200e, entry->tpd->tsd[ 0 ].buffer, entry->tpd->tsd[ 0 ].length, diff --git a/drivers/atm/he.c b/drivers/atm/he.c index 3022c548a13..df2c83fd549 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -412,8 +412,7 @@ he_init_one(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent) init_one_failure: if (atm_dev) atm_dev_deregister(atm_dev); - if (he_dev) - kfree(he_dev); + kfree(he_dev); pci_disable_device(pci_dev); return err; } @@ -2534,8 +2533,7 @@ he_open(struct atm_vcc *vcc) open_failed: if (err) { - if (he_vcc) - kfree(he_vcc); + kfree(he_vcc); clear_bit(ATM_VF_ADDR, &vcc->flags); } else diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c index 85bf5c8442b..b2a7b754fd1 100644 --- a/drivers/atm/nicstar.c +++ b/drivers/atm/nicstar.c @@ -676,10 +676,10 @@ static int __devinit ns_init_card(int i, struct pci_dev *pcidev) PRINTK("nicstar%d: RSQ base at 0x%x.\n", i, (u32) card->rsq.base); /* Initialize SCQ0, the only VBR SCQ used */ - card->scq1 = (scq_info *) NULL; - card->scq2 = (scq_info *) NULL; + card->scq1 = NULL; + card->scq2 = NULL; card->scq0 = get_scq(VBR_SCQSIZE, NS_VRSCD0); - if (card->scq0 == (scq_info *) NULL) + if (card->scq0 == NULL) { printk("nicstar%d: can't get SCQ0.\n", i); error = 12; @@ -993,24 +993,24 @@ static scq_info *get_scq(int size, u32 scd) int i; if (size != VBR_SCQSIZE && size != CBR_SCQSIZE) - return (scq_info *) NULL; + return NULL; scq = (scq_info *) kmalloc(sizeof(scq_info), GFP_KERNEL); - if (scq == (scq_info *) NULL) - return (scq_info *) NULL; + if (scq == NULL) + return NULL; scq->org = kmalloc(2 * size, GFP_KERNEL); if (scq->org == NULL) { kfree(scq); - return (scq_info *) NULL; + return NULL; } scq->skb = (struct sk_buff **) kmalloc(sizeof(struct sk_buff *) * (size / NS_SCQE_SIZE), GFP_KERNEL); - if (scq->skb == (struct sk_buff **) NULL) + if (scq->skb == NULL) { kfree(scq->org); kfree(scq); - return (scq_info *) NULL; + return NULL; } scq->num_entries = size / NS_SCQE_SIZE; scq->base = (ns_scqe *) ALIGN_ADDRESS(scq->org, size); @@ -1498,7 +1498,7 @@ static int ns_open(struct atm_vcc *vcc) vc->cbr_scd = NS_FRSCD + frscdi * NS_FRSCD_SIZE; scq = get_scq(CBR_SCQSIZE, vc->cbr_scd); - if (scq == (scq_info *) NULL) + if (scq == NULL) { PRINTK("nicstar%d: can't get fixed rate SCQ.\n", card->index); card->scd2vc[frscdi] = NULL; diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c index 47a800519ad..8d5e65cb975 100644 --- a/drivers/atm/zatm.c +++ b/drivers/atm/zatm.c @@ -902,7 +902,7 @@ static void close_tx(struct atm_vcc *vcc) zatm_dev->tx_bw += vcc->qos.txtp.min_pcr; dealloc_shaper(vcc->dev,zatm_vcc->shaper); } - if (zatm_vcc->ring) kfree(zatm_vcc->ring); + kfree(zatm_vcc->ring); } @@ -1339,12 +1339,9 @@ static int __init zatm_start(struct atm_dev *dev) return 0; out: for (i = 0; i < NR_MBX; i++) - if (zatm_dev->mbx_start[i] != 0) - kfree((void *) zatm_dev->mbx_start[i]); - if (zatm_dev->rx_map != NULL) - kfree(zatm_dev->rx_map); - if (zatm_dev->tx_map != NULL) - kfree(zatm_dev->tx_map); + kfree(zatm_dev->mbx_start[i]); + kfree(zatm_dev->rx_map); + kfree(zatm_dev->tx_map); free_irq(zatm_dev->irq, dev); return error; } diff --git a/drivers/base/Makefile b/drivers/base/Makefile index 6662b545e0a..a47928a2e57 100644 --- a/drivers/base/Makefile +++ b/drivers/base/Makefile @@ -1,6 +1,6 @@ # Makefile for the Linux device tree -obj-y := core.o sys.o interface.o bus.o \ +obj-y := core.o sys.o bus.o \ driver.o class.o class_simple.o platform.o \ cpu.o firmware.o init.o map.o dmapool.o \ attribute_container.o transport_class.o diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 2b3902c867d..3cb04bb04c2 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -390,7 +390,6 @@ void device_release_driver(struct device * dev) sysfs_remove_link(&drv->kobj, kobject_name(&dev->kobj)); sysfs_remove_link(&dev->kobj, "driver"); list_del_init(&dev->driver_list); - device_detach_shutdown(dev); if (drv->remove) drv->remove(dev); dev->driver = NULL; diff --git a/drivers/base/core.c b/drivers/base/core.c index 268a9c8d168..fbc223486f8 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -31,8 +31,6 @@ int (*platform_notify_remove)(struct device * dev) = NULL; #define to_dev(obj) container_of(obj, struct device, kobj) #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr) -extern struct attribute * dev_default_attrs[]; - static ssize_t dev_attr_show(struct kobject * kobj, struct attribute * attr, char * buf) { @@ -89,7 +87,6 @@ static void device_release(struct kobject * kobj) static struct kobj_type ktype_device = { .release = device_release, .sysfs_ops = &dev_sysfs_ops, - .default_attrs = dev_default_attrs, }; @@ -248,6 +245,7 @@ int device_add(struct device *dev) if ((error = kobject_add(&dev->kobj))) goto Error; + kobject_hotplug(&dev->kobj, KOBJ_ADD); if ((error = device_pm_add(dev))) goto PMError; if ((error = bus_add_device(dev))) @@ -260,14 +258,13 @@ int device_add(struct device *dev) /* notify platform of device entry */ if (platform_notify) platform_notify(dev); - - kobject_hotplug(&dev->kobj, KOBJ_ADD); Done: put_device(dev); return error; BusError: device_pm_remove(dev); PMError: + kobject_hotplug(&dev->kobj, KOBJ_REMOVE); kobject_del(&dev->kobj); Error: if (parent) diff --git a/drivers/base/interface.c b/drivers/base/interface.c deleted file mode 100644 index bd515843a0c..00000000000 --- a/drivers/base/interface.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * drivers/base/interface.c - common driverfs interface that's exported to - * the world for all devices. - * - * Copyright (c) 2002-3 Patrick Mochel - * Copyright (c) 2002-3 Open Source Development Labs - * - * This file is released under the GPLv2 - * - */ - -#include <linux/device.h> -#include <linux/err.h> -#include <linux/stat.h> -#include <linux/string.h> - -/** - * detach_state - control the default power state for the device. - * - * This is the state the device enters when it's driver module is - * unloaded. The value is an unsigned integer, in the range of 0-4. - * '0' indicates 'On', so no action will be taken when the driver is - * unloaded. This is the default behavior. - * '4' indicates 'Off', meaning the driver core will call the driver's - * shutdown method to quiesce the device. - * 1-3 indicate a low-power state for the device to enter via the - * driver's suspend method. - */ - -static ssize_t detach_show(struct device * dev, char * buf) -{ - return sprintf(buf, "%u\n", dev->detach_state); -} - -static ssize_t detach_store(struct device * dev, const char * buf, size_t n) -{ - u32 state; - state = simple_strtoul(buf, NULL, 10); - if (state > 4) - return -EINVAL; - dev->detach_state = state; - return n; -} - -static DEVICE_ATTR(detach_state, 0644, detach_show, detach_store); - - -struct attribute * dev_default_attrs[] = { - &dev_attr_detach_state.attr, - NULL, -}; diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index e5eda746f2a..2e700d795cf 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -1,18 +1,7 @@ - - -enum { - DEVICE_PM_ON, - DEVICE_PM1, - DEVICE_PM2, - DEVICE_PM3, - DEVICE_PM_OFF, -}; - /* * shutdown.c */ -extern int device_detach_shutdown(struct device *); extern void device_shutdown(void); diff --git a/drivers/base/power/resume.c b/drivers/base/power/resume.c index f8f5055754d..26468971ef5 100644 --- a/drivers/base/power/resume.c +++ b/drivers/base/power/resume.c @@ -22,8 +22,17 @@ extern int sysdev_resume(void); int resume_device(struct device * dev) { - if (dev->bus && dev->bus->resume) + if (dev->power.pm_parent + && dev->power.pm_parent->power.power_state) { + dev_err(dev, "PM: resume from %d, parent %s still %d\n", + dev->power.power_state, + dev->power.pm_parent->bus_id, + dev->power.pm_parent->power.power_state); + } + if (dev->bus && dev->bus->resume) { + dev_dbg(dev,"resuming\n"); return dev->bus->resume(dev); + } return 0; } diff --git a/drivers/base/power/shutdown.c b/drivers/base/power/shutdown.c index d1e023fbe16..f50a08be424 100644 --- a/drivers/base/power/shutdown.c +++ b/drivers/base/power/shutdown.c @@ -19,20 +19,6 @@ extern struct subsystem devices_subsys; -int device_detach_shutdown(struct device * dev) -{ - if (!dev->detach_state) - return 0; - - if (dev->detach_state == DEVICE_PM_OFF) { - if (dev->driver && dev->driver->shutdown) - dev->driver->shutdown(dev); - return 0; - } - return dpm_runtime_suspend(dev, dev->detach_state); -} - - /** * We handle system devices differently - we suspend and shut them * down last and resume them first. That way, we don't do anything stupid like @@ -52,13 +38,12 @@ void device_shutdown(void) struct device * dev; down_write(&devices_subsys.rwsem); - list_for_each_entry_reverse(dev, &devices_subsys.kset.list, kobj.entry) { - pr_debug("shutting down %s: ", dev->bus_id); + list_for_each_entry_reverse(dev, &devices_subsys.kset.list, + kobj.entry) { if (dev->driver && dev->driver->shutdown) { - pr_debug("Ok\n"); + dev_dbg(dev, "shutdown\n"); dev->driver->shutdown(dev); - } else - pr_debug("Ignored.\n"); + } } up_write(&devices_subsys.rwsem); diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c index a0b5cf689e6..0ec44ef840b 100644 --- a/drivers/base/power/suspend.c +++ b/drivers/base/power/suspend.c @@ -39,12 +39,25 @@ int suspend_device(struct device * dev, pm_message_t state) { int error = 0; - dev_dbg(dev, "suspending\n"); + if (dev->power.power_state) { + dev_dbg(dev, "PM: suspend %d-->%d\n", + dev->power.power_state, state); + } + if (dev->power.pm_parent + && dev->power.pm_parent->power.power_state) { + dev_err(dev, + "PM: suspend %d->%d, parent %s already %d\n", + dev->power.power_state, state, + dev->power.pm_parent->bus_id, + dev->power.pm_parent->power.power_state); + } dev->power.prev_state = dev->power.power_state; - if (dev->bus && dev->bus->suspend && !dev->power.power_state) + if (dev->bus && dev->bus->suspend && !dev->power.power_state) { + dev_dbg(dev, "suspending\n"); error = dev->bus->suspend(dev, state); + } return error; } diff --git a/drivers/block/ioctl.c b/drivers/block/ioctl.c index 5e03f5157ef..6d7bcc9da9e 100644 --- a/drivers/block/ioctl.c +++ b/drivers/block/ioctl.c @@ -237,3 +237,5 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg) } return ret; } + +EXPORT_SYMBOL_GPL(blkdev_ioctl); diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c index 1a1fa3ccb91..bc56770bcc9 100644 --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -914,8 +914,10 @@ static int pkt_handle_queue(struct pktcdvd_device *pd) bio = node->bio; zone = ZONE(bio->bi_sector, pd); list_for_each_entry(p, &pd->cdrw.pkt_active_list, list) { - if (p->sector == zone) + if (p->sector == zone) { + bio = NULL; goto try_next_bio; + } } break; try_next_bio: @@ -2019,7 +2021,13 @@ static int pkt_open(struct inode *inode, struct file *file) BUG_ON(pd->refcnt < 0); pd->refcnt++; - if (pd->refcnt == 1) { + if (pd->refcnt > 1) { + if ((file->f_mode & FMODE_WRITE) && + !test_bit(PACKET_WRITABLE, &pd->flags)) { + ret = -EBUSY; + goto out_dec; + } + } else { if (pkt_open_dev(pd, file->f_mode & FMODE_WRITE)) { ret = -EIO; goto out_dec; @@ -2406,7 +2414,7 @@ static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, u case CDROM_LAST_WRITTEN: case CDROM_SEND_PACKET: case SCSI_IOCTL_SEND_COMMAND: - return ioctl_by_bdev(pd->bdev, cmd, arg); + return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg); case CDROMEJECT: /* @@ -2414,7 +2422,7 @@ static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, u * have to unlock it or else the eject command fails. */ pkt_lock_door(pd, 0); - return ioctl_by_bdev(pd->bdev, cmd, arg); + return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg); default: printk("pktcdvd: Unknown ioctl for %s (%x)\n", pd->name, cmd); diff --git a/drivers/block/ub.c b/drivers/block/ub.c index ce42889f98f..adc4dcc306f 100644 --- a/drivers/block/ub.c +++ b/drivers/block/ub.c @@ -8,13 +8,12 @@ * and is not licensed separately. See file COPYING for details. * * TODO (sorted by decreasing priority) + * -- Kill first_open (Al Viro fixed the block layer now) * -- Do resets with usb_device_reset (needs a thread context, use khubd) * -- set readonly flag for CDs, set removable flag for CF readers * -- do inquiry and verify we got a disk and not a tape (for LUN mismatch) - * -- support pphaneuf's SDDR-75 with two LUNs (also broken capacity...) * -- special case some senses, e.g. 3a/0 -> no media present, reduce retries * -- verify the 13 conditions and do bulk resets - * -- normal pool of commands instead of cmdv[]? * -- kill last_pipe and simply do two-state clearing on both pipes * -- verify protocol (bulk) from USB descriptors (maybe...) * -- highmem and sg @@ -49,7 +48,14 @@ #define US_SC_SCSI 0x06 /* Transparent */ /* + * This many LUNs per USB device. + * Every one of them takes a host, see UB_MAX_HOSTS. */ +#define UB_MAX_LUNS 4 + +/* + */ + #define UB_MINORS_PER_MAJOR 8 #define UB_MAX_CDB_SIZE 16 /* Corresponds to Bulk */ @@ -65,7 +71,7 @@ struct bulk_cb_wrap { u32 Tag; /* unique per command id */ __le32 DataTransferLength; /* size of data */ u8 Flags; /* direction in bit 0 */ - u8 Lun; /* LUN normally 0 */ + u8 Lun; /* LUN */ u8 Length; /* of of the CDB */ u8 CDB[UB_MAX_CDB_SIZE]; /* max command */ }; @@ -168,6 +174,7 @@ struct ub_scsi_cmd { unsigned int len; /* Requested length */ // struct scatterlist sgv[UB_MAX_REQ_SG]; + struct ub_lun *lun; void (*done)(struct ub_dev *, struct ub_scsi_cmd *); void *back; }; @@ -252,25 +259,47 @@ struct ub_scsi_cmd_queue { }; /* - * The UB device instance. + * The block device instance (one per LUN). + */ +struct ub_lun { + struct ub_dev *udev; + struct list_head link; + struct gendisk *disk; + int id; /* Host index */ + int num; /* LUN number */ + char name[16]; + + int changed; /* Media was changed */ + int removable; + int readonly; + int first_open; /* Kludge. See ub_bd_open. */ + + /* Use Ingo's mempool if or when we have more than one command. */ + /* + * Currently we never need more than one command for the whole device. + * However, giving every LUN a command is a cheap and automatic way + * to enforce fairness between them. + */ + int cmda[1]; + struct ub_scsi_cmd cmdv[1]; + + struct ub_capacity capacity; +}; + +/* + * The USB device instance. */ struct ub_dev { spinlock_t lock; - int id; /* Number among ub's */ atomic_t poison; /* The USB device is disconnected */ int openc; /* protected by ub_lock! */ /* kref is too implicit for our taste */ unsigned int tagcnt; - int changed; /* Media was changed */ - int removable; - int readonly; - int first_open; /* Kludge. See ub_bd_open. */ - char name[8]; + char name[12]; struct usb_device *dev; struct usb_interface *intf; - struct ub_capacity capacity; - struct gendisk *disk; + struct list_head luns; unsigned int send_bulk_pipe; /* cached pipe values */ unsigned int recv_bulk_pipe; @@ -279,10 +308,6 @@ struct ub_dev { struct tasklet_struct tasklet; - /* XXX Use Ingo's mempool (once we have more than one) */ - int cmda[1]; - struct ub_scsi_cmd cmdv[1]; - struct ub_scsi_cmd_queue cmd_queue; struct ub_scsi_cmd top_rqs_cmd; /* REQUEST SENSE */ unsigned char top_sense[UB_SENSE_SIZE]; @@ -301,9 +326,9 @@ struct ub_dev { /* */ static void ub_cleanup(struct ub_dev *sc); -static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq); -static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd, - struct request *rq); +static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq); +static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct request *rq); static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd, struct request *rq); static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd); @@ -320,8 +345,10 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd); static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd, int stalled_pipe); static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd); -static int ub_sync_tur(struct ub_dev *sc); -static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret); +static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun); +static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun, + struct ub_capacity *ret); +static int ub_probe_lun(struct ub_dev *sc, int lnum); /* */ @@ -342,6 +369,7 @@ MODULE_DEVICE_TABLE(usb, ub_usb_ids); */ #define UB_MAX_HOSTS 26 static char ub_hostv[UB_MAX_HOSTS]; + static DEFINE_SPINLOCK(ub_lock); /* Locks globals and ->openc */ /* @@ -406,6 +434,8 @@ static ssize_t ub_diag_show(struct device *dev, char *page) { struct usb_interface *intf; struct ub_dev *sc; + struct list_head *p; + struct ub_lun *lun; int cnt; unsigned long flags; int nc, nh; @@ -421,9 +451,15 @@ static ssize_t ub_diag_show(struct device *dev, char *page) spin_lock_irqsave(&sc->lock, flags); cnt += sprintf(page + cnt, - "qlen %d qmax %d changed %d removable %d readonly %d\n", - sc->cmd_queue.qlen, sc->cmd_queue.qmax, - sc->changed, sc->removable, sc->readonly); + "qlen %d qmax %d\n", + sc->cmd_queue.qlen, sc->cmd_queue.qmax); + + list_for_each (p, &sc->luns) { + lun = list_entry(p, struct ub_lun, link); + cnt += sprintf(page + cnt, + "lun %u changed %d removable %d readonly %d\n", + lun->num, lun->changed, lun->removable, lun->readonly); + } if ((nc = sc->tr.cur + 1) == SCMD_TRACE_SZ) nc = 0; for (j = 0; j < SCMD_TRACE_SZ; j++) { @@ -523,53 +559,63 @@ static void ub_put(struct ub_dev *sc) */ static void ub_cleanup(struct ub_dev *sc) { + struct list_head *p; + struct ub_lun *lun; request_queue_t *q; - /* I don't think queue can be NULL. But... Stolen from sx8.c */ - if ((q = sc->disk->queue) != NULL) - blk_cleanup_queue(q); + while (!list_empty(&sc->luns)) { + p = sc->luns.next; + lun = list_entry(p, struct ub_lun, link); + list_del(p); - /* - * If we zero disk->private_data BEFORE put_disk, we have to check - * for NULL all over the place in open, release, check_media and - * revalidate, because the block level semaphore is well inside the - * put_disk. But we cannot zero after the call, because *disk is gone. - * The sd.c is blatantly racy in this area. - */ - /* disk->private_data = NULL; */ - put_disk(sc->disk); - sc->disk = NULL; + /* I don't think queue can be NULL. But... Stolen from sx8.c */ + if ((q = lun->disk->queue) != NULL) + blk_cleanup_queue(q); + /* + * If we zero disk->private_data BEFORE put_disk, we have + * to check for NULL all over the place in open, release, + * check_media and revalidate, because the block level + * semaphore is well inside the put_disk. + * But we cannot zero after the call, because *disk is gone. + * The sd.c is blatantly racy in this area. + */ + /* disk->private_data = NULL; */ + put_disk(lun->disk); + lun->disk = NULL; + + ub_id_put(lun->id); + kfree(lun); + } - ub_id_put(sc->id); kfree(sc); } /* * The "command allocator". */ -static struct ub_scsi_cmd *ub_get_cmd(struct ub_dev *sc) +static struct ub_scsi_cmd *ub_get_cmd(struct ub_lun *lun) { struct ub_scsi_cmd *ret; - if (sc->cmda[0]) + if (lun->cmda[0]) return NULL; - ret = &sc->cmdv[0]; - sc->cmda[0] = 1; + ret = &lun->cmdv[0]; + lun->cmda[0] = 1; return ret; } -static void ub_put_cmd(struct ub_dev *sc, struct ub_scsi_cmd *cmd) +static void ub_put_cmd(struct ub_lun *lun, struct ub_scsi_cmd *cmd) { - if (cmd != &sc->cmdv[0]) { + if (cmd != &lun->cmdv[0]) { printk(KERN_WARNING "%s: releasing a foreign cmd %p\n", - sc->name, cmd); + lun->name, cmd); return; } - if (!sc->cmda[0]) { - printk(KERN_WARNING "%s: releasing a free cmd\n", sc->name); + if (!lun->cmda[0]) { + printk(KERN_WARNING "%s: releasing a free cmd\n", lun->name); return; } - sc->cmda[0] = 0; + lun->cmda[0] = 0; } /* @@ -630,29 +676,30 @@ static struct ub_scsi_cmd *ub_cmdq_pop(struct ub_dev *sc) static void ub_bd_rq_fn(request_queue_t *q) { - struct ub_dev *sc = q->queuedata; + struct ub_lun *lun = q->queuedata; struct request *rq; while ((rq = elv_next_request(q)) != NULL) { - if (ub_bd_rq_fn_1(sc, rq) != 0) { + if (ub_bd_rq_fn_1(lun, rq) != 0) { blk_stop_queue(q); break; } } } -static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq) +static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq) { + struct ub_dev *sc = lun->udev; struct ub_scsi_cmd *cmd; int rc; - if (atomic_read(&sc->poison) || sc->changed) { + if (atomic_read(&sc->poison) || lun->changed) { blkdev_dequeue_request(rq); ub_end_rq(rq, 0); return 0; } - if ((cmd = ub_get_cmd(sc)) == NULL) + if ((cmd = ub_get_cmd(lun)) == NULL) return -1; memset(cmd, 0, sizeof(struct ub_scsi_cmd)); @@ -661,32 +708,30 @@ static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq) if (blk_pc_request(rq)) { rc = ub_cmd_build_packet(sc, cmd, rq); } else { - rc = ub_cmd_build_block(sc, cmd, rq); + rc = ub_cmd_build_block(sc, lun, cmd, rq); } if (rc != 0) { - ub_put_cmd(sc, cmd); + ub_put_cmd(lun, cmd); ub_end_rq(rq, 0); - blk_start_queue(sc->disk->queue); return 0; } - cmd->state = UB_CMDST_INIT; + cmd->lun = lun; cmd->done = ub_rw_cmd_done; cmd->back = rq; cmd->tag = sc->tagcnt++; if ((rc = ub_submit_scsi(sc, cmd)) != 0) { - ub_put_cmd(sc, cmd); + ub_put_cmd(lun, cmd); ub_end_rq(rq, 0); - blk_start_queue(sc->disk->queue); return 0; } return 0; } -static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd, - struct request *rq) +static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun, + struct ub_scsi_cmd *cmd, struct request *rq) { int ub_dir; #if 0 /* We use rq->buffer for now */ @@ -707,7 +752,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd, sg = &cmd->sgv[0]; n_elem = blk_rq_map_sg(q, rq, sg); if (n_elem <= 0) { - ub_put_cmd(sc, cmd); + ub_put_cmd(lun, cmd); ub_end_rq(rq, 0); blk_start_queue(q); return 0; /* request with no s/g entries? */ @@ -716,7 +761,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd, if (n_elem != 1) { /* Paranoia */ printk(KERN_WARNING "%s: request with %d segments\n", sc->name, n_elem); - ub_put_cmd(sc, cmd); + ub_put_cmd(lun, cmd); ub_end_rq(rq, 0); blk_start_queue(q); return 0; @@ -748,8 +793,8 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd, * The call to blk_queue_hardsect_size() guarantees that request * is aligned, but it is given in terms of 512 byte units, always. */ - block = rq->sector >> sc->capacity.bshift; - nblks = rq->nr_sectors >> sc->capacity.bshift; + block = rq->sector >> lun->capacity.bshift; + nblks = rq->nr_sectors >> lun->capacity.bshift; cmd->cdb[0] = (ub_dir == UB_DIR_READ)? READ_10: WRITE_10; /* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */ @@ -803,7 +848,8 @@ static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd, static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) { struct request *rq = cmd->back; - struct gendisk *disk = sc->disk; + struct ub_lun *lun = cmd->lun; + struct gendisk *disk = lun->disk; request_queue_t *q = disk->queue; int uptodate; @@ -818,7 +864,7 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) else uptodate = 0; - ub_put_cmd(sc, cmd); + ub_put_cmd(lun, cmd); ub_end_rq(rq, uptodate); blk_start_queue(q); } @@ -887,7 +933,7 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd) bcb->Tag = cmd->tag; /* Endianness is not important */ bcb->DataTransferLength = cpu_to_le32(cmd->len); bcb->Flags = (cmd->dir == UB_DIR_READ) ? 0x80 : 0; - bcb->Lun = 0; /* No multi-LUN yet */ + bcb->Lun = (cmd->lun != NULL) ? cmd->lun->num : 0; bcb->Length = cmd->cdb_len; /* copy the command payload */ @@ -1002,9 +1048,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * The control pipe clears itself - nothing to do. * XXX Might try to reset the device here and retry. */ - printk(KERN_NOTICE "%s: " - "stall on control pipe for device %u\n", - sc->name, sc->dev->devnum); + printk(KERN_NOTICE "%s: stall on control pipe\n", + sc->name); goto Bad_End; } @@ -1025,9 +1070,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * The control pipe clears itself - nothing to do. * XXX Might try to reset the device here and retry. */ - printk(KERN_NOTICE "%s: " - "stall on control pipe for device %u\n", - sc->name, sc->dev->devnum); + printk(KERN_NOTICE "%s: stall on control pipe\n", + sc->name); goto Bad_End; } @@ -1046,9 +1090,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe); if (rc != 0) { printk(KERN_NOTICE "%s: " - "unable to submit clear for device %u" - " (code %d)\n", - sc->name, sc->dev->devnum, rc); + "unable to submit clear (%d)\n", + sc->name, rc); /* * This is typically ENOMEM or some other such shit. * Retrying is pointless. Just do Bad End on it... @@ -1107,9 +1150,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe); if (rc != 0) { printk(KERN_NOTICE "%s: " - "unable to submit clear for device %u" - " (code %d)\n", - sc->name, sc->dev->devnum, rc); + "unable to submit clear (%d)\n", + sc->name, rc); /* * This is typically ENOMEM or some other such shit. * Retrying is pointless. Just do Bad End on it... @@ -1140,9 +1182,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe); if (rc != 0) { printk(KERN_NOTICE "%s: " - "unable to submit clear for device %u" - " (code %d)\n", - sc->name, sc->dev->devnum, rc); + "unable to submit clear (%d)\n", + sc->name, rc); /* * This is typically ENOMEM or some other such shit. * Retrying is pointless. Just do Bad End on it... @@ -1164,9 +1205,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) * encounter such a thing, try to read the CSW again. */ if (++cmd->stat_count >= 4) { - printk(KERN_NOTICE "%s: " - "unable to get CSW on device %u\n", - sc->name, sc->dev->devnum); + printk(KERN_NOTICE "%s: unable to get CSW\n", + sc->name); goto Bad_End; } __ub_state_stat(sc, cmd); @@ -1207,10 +1247,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) */ if (++cmd->stat_count >= 4) { printk(KERN_NOTICE "%s: " - "tag mismatch orig 0x%x reply 0x%x " - "on device %u\n", - sc->name, cmd->tag, bcs->Tag, - sc->dev->devnum); + "tag mismatch orig 0x%x reply 0x%x\n", + sc->name, cmd->tag, bcs->Tag); goto Bad_End; } __ub_state_stat(sc, cmd); @@ -1244,8 +1282,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd) } else { printk(KERN_WARNING "%s: " - "wrong command state %d on device %u\n", - sc->name, cmd->state, sc->dev->devnum); + "wrong command state %d\n", + sc->name, cmd->state); goto Bad_End; } return; @@ -1288,7 +1326,6 @@ static void __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd) if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) { /* XXX Clear stalls */ - printk("%s: CSW #%d submit failed (%d)\n", sc->name, cmd->tag, rc); /* P3 */ ub_complete(&sc->work_done); ub_state_done(sc, cmd, rc); return; @@ -1333,6 +1370,7 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd) scmd->state = UB_CMDST_INIT; scmd->data = sc->top_sense; scmd->len = UB_SENSE_SIZE; + scmd->lun = cmd->lun; scmd->done = ub_top_sense_done; scmd->back = cmd; @@ -1411,14 +1449,14 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) } if (cmd != scmd->back) { printk(KERN_WARNING "%s: " - "sense done for wrong command 0x%x on device %u\n", - sc->name, cmd->tag, sc->dev->devnum); + "sense done for wrong command 0x%x\n", + sc->name, cmd->tag); return; } if (cmd->state != UB_CMDST_SENSE) { printk(KERN_WARNING "%s: " - "sense done with bad cmd state %d on device %u\n", - sc->name, cmd->state, sc->dev->devnum); + "sense done with bad cmd state %d\n", + sc->name, cmd->state); return; } @@ -1429,68 +1467,32 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd) ub_scsi_urb_compl(sc, cmd); } -#if 0 -/* Determine what the maximum LUN supported is */ -int usb_stor_Bulk_max_lun(struct us_data *us) -{ - int result; - - /* issue the command */ - result = usb_stor_control_msg(us, us->recv_ctrl_pipe, - US_BULK_GET_MAX_LUN, - USB_DIR_IN | USB_TYPE_CLASS | - USB_RECIP_INTERFACE, - 0, us->ifnum, us->iobuf, 1, HZ); - - /* - * Some devices (i.e. Iomega Zip100) need this -- apparently - * the bulk pipes get STALLed when the GetMaxLUN request is - * processed. This is, in theory, harmless to all other devices - * (regardless of if they stall or not). - */ - if (result < 0) { - usb_stor_clear_halt(us, us->recv_bulk_pipe); - usb_stor_clear_halt(us, us->send_bulk_pipe); - } - - US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", - result, us->iobuf[0]); - - /* if we have a successful request, return the result */ - if (result == 1) - return us->iobuf[0]; - - /* return the default -- no LUNs */ - return 0; -} -#endif - /* * This is called from a process context. */ -static void ub_revalidate(struct ub_dev *sc) +static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun) { - sc->readonly = 0; /* XXX Query this from the device */ + lun->readonly = 0; /* XXX Query this from the device */ - sc->capacity.nsec = 0; - sc->capacity.bsize = 512; - sc->capacity.bshift = 0; + lun->capacity.nsec = 0; + lun->capacity.bsize = 512; + lun->capacity.bshift = 0; - if (ub_sync_tur(sc) != 0) + if (ub_sync_tur(sc, lun) != 0) return; /* Not ready */ - sc->changed = 0; + lun->changed = 0; - if (ub_sync_read_cap(sc, &sc->capacity) != 0) { + if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) { /* * The retry here means something is wrong, either with the * device, with the transport, or with our code. * We keep this because sd.c has retries for capacity. */ - if (ub_sync_read_cap(sc, &sc->capacity) != 0) { - sc->capacity.nsec = 0; - sc->capacity.bsize = 512; - sc->capacity.bshift = 0; + if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) { + lun->capacity.nsec = 0; + lun->capacity.bsize = 512; + lun->capacity.bshift = 0; } } } @@ -1503,12 +1505,15 @@ static void ub_revalidate(struct ub_dev *sc) static int ub_bd_open(struct inode *inode, struct file *filp) { struct gendisk *disk = inode->i_bdev->bd_disk; + struct ub_lun *lun; struct ub_dev *sc; unsigned long flags; int rc; - if ((sc = disk->private_data) == NULL) + if ((lun = disk->private_data) == NULL) return -ENXIO; + sc = lun->udev; + spin_lock_irqsave(&ub_lock, flags); if (atomic_read(&sc->poison)) { spin_unlock_irqrestore(&ub_lock, flags); @@ -1529,15 +1534,15 @@ static int ub_bd_open(struct inode *inode, struct file *filp) * The bottom line is, Al Viro says that we should not allow * bdev->bd_invalidated to be set when doing add_disk no matter what. */ - if (sc->first_open) { - if (sc->changed) { - sc->first_open = 0; + if (lun->first_open) { + lun->first_open = 0; + if (lun->changed) { rc = -ENOMEDIUM; goto err_open; } } - if (sc->removable || sc->readonly) + if (lun->removable || lun->readonly) check_disk_change(inode->i_bdev); /* @@ -1545,12 +1550,12 @@ static int ub_bd_open(struct inode *inode, struct file *filp) * under some pretty murky conditions (a failure of READ CAPACITY). * We may need it one day. */ - if (sc->removable && sc->changed && !(filp->f_flags & O_NDELAY)) { + if (lun->removable && lun->changed && !(filp->f_flags & O_NDELAY)) { rc = -ENOMEDIUM; goto err_open; } - if (sc->readonly && (filp->f_mode & FMODE_WRITE)) { + if (lun->readonly && (filp->f_mode & FMODE_WRITE)) { rc = -EROFS; goto err_open; } @@ -1567,7 +1572,8 @@ err_open: static int ub_bd_release(struct inode *inode, struct file *filp) { struct gendisk *disk = inode->i_bdev->bd_disk; - struct ub_dev *sc = disk->private_data; + struct ub_lun *lun = disk->private_data; + struct ub_dev *sc = lun->udev; ub_put(sc); return 0; @@ -1597,20 +1603,14 @@ static int ub_bd_ioctl(struct inode *inode, struct file *filp, */ static int ub_bd_revalidate(struct gendisk *disk) { - struct ub_dev *sc = disk->private_data; - - ub_revalidate(sc); - /* This is pretty much a long term P3 */ - if (!atomic_read(&sc->poison)) { /* Cover sc->dev */ - printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n", - sc->name, sc->dev->devnum, - sc->capacity.nsec, sc->capacity.bsize); - } + struct ub_lun *lun = disk->private_data; + + ub_revalidate(lun->udev, lun); /* XXX Support sector size switching like in sr.c */ - blk_queue_hardsect_size(disk->queue, sc->capacity.bsize); - set_capacity(disk, sc->capacity.nsec); - // set_disk_ro(sdkp->disk, sc->readonly); + blk_queue_hardsect_size(disk->queue, lun->capacity.bsize); + set_capacity(disk, lun->capacity.nsec); + // set_disk_ro(sdkp->disk, lun->readonly); return 0; } @@ -1626,9 +1626,9 @@ static int ub_bd_revalidate(struct gendisk *disk) */ static int ub_bd_media_changed(struct gendisk *disk) { - struct ub_dev *sc = disk->private_data; + struct ub_lun *lun = disk->private_data; - if (!sc->removable) + if (!lun->removable) return 0; /* @@ -1640,12 +1640,12 @@ static int ub_bd_media_changed(struct gendisk *disk) * will fail, then block layer discards the data. Since we never * spin drives up, such devices simply cannot be used with ub anyway. */ - if (ub_sync_tur(sc) != 0) { - sc->changed = 1; + if (ub_sync_tur(lun->udev, lun) != 0) { + lun->changed = 1; return 1; } - return sc->changed; + return lun->changed; } static struct block_device_operations ub_bd_fops = { @@ -1669,7 +1669,7 @@ static void ub_probe_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd) /* * Test if the device has a check condition on it, synchronously. */ -static int ub_sync_tur(struct ub_dev *sc) +static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun) { struct ub_scsi_cmd *cmd; enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) }; @@ -1688,6 +1688,7 @@ static int ub_sync_tur(struct ub_dev *sc) cmd->cdb_len = 6; cmd->dir = UB_DIR_NONE; cmd->state = UB_CMDST_INIT; + cmd->lun = lun; /* This may be NULL, but that's ok */ cmd->done = ub_probe_done; cmd->back = &compl; @@ -1718,7 +1719,8 @@ err_alloc: /* * Read the SCSI capacity synchronously (for probing). */ -static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret) +static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun, + struct ub_capacity *ret) { struct ub_scsi_cmd *cmd; char *p; @@ -1743,6 +1745,7 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret) cmd->state = UB_CMDST_INIT; cmd->data = p; cmd->len = 8; + cmd->lun = lun; cmd->done = ub_probe_done; cmd->back = &compl; @@ -1812,6 +1815,90 @@ static void ub_probe_timeout(unsigned long arg) } /* + * Get number of LUNs by the way of Bulk GetMaxLUN command. + */ +static int ub_sync_getmaxlun(struct ub_dev *sc) +{ + int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber; + unsigned char *p; + enum { ALLOC_SIZE = 1 }; + struct usb_ctrlrequest *cr; + struct completion compl; + struct timer_list timer; + int nluns; + int rc; + + init_completion(&compl); + + rc = -ENOMEM; + if ((p = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL) + goto err_alloc; + *p = 55; + + cr = &sc->work_cr; + cr->bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE; + cr->bRequest = US_BULK_GET_MAX_LUN; + cr->wValue = cpu_to_le16(0); + cr->wIndex = cpu_to_le16(ifnum); + cr->wLength = cpu_to_le16(1); + + usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe, + (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl); + sc->work_urb.transfer_flags = 0; + sc->work_urb.actual_length = 0; + sc->work_urb.error_count = 0; + sc->work_urb.status = 0; + + if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) { + if (rc == -EPIPE) { + printk("%s: Stall at GetMaxLUN, using 1 LUN\n", + sc->name); /* P3 */ + } else { + printk(KERN_WARNING + "%s: Unable to submit GetMaxLUN (%d)\n", + sc->name, rc); + } + goto err_submit; + } + + init_timer(&timer); + timer.function = ub_probe_timeout; + timer.data = (unsigned long) &compl; + timer.expires = jiffies + UB_CTRL_TIMEOUT; + add_timer(&timer); + + wait_for_completion(&compl); + + del_timer_sync(&timer); + usb_kill_urb(&sc->work_urb); + + if (sc->work_urb.actual_length != 1) { + printk("%s: GetMaxLUN returned %d bytes\n", sc->name, + sc->work_urb.actual_length); /* P3 */ + nluns = 0; + } else { + if ((nluns = *p) == 55) { + nluns = 0; + } else { + /* GetMaxLUN returns the maximum LUN number */ + nluns += 1; + if (nluns > UB_MAX_LUNS) + nluns = UB_MAX_LUNS; + } + printk("%s: GetMaxLUN returned %d, using %d LUNs\n", sc->name, + *p, nluns); /* P3 */ + } + + kfree(p); + return nluns; + +err_submit: + kfree(p); +err_alloc: + return rc; +} + +/* * Clear initial stalls. */ static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe) @@ -1897,8 +1984,8 @@ static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev, } if (ep_in == NULL || ep_out == NULL) { - printk(KERN_NOTICE "%s: device %u failed endpoint check\n", - sc->name, sc->dev->devnum); + printk(KERN_NOTICE "%s: failed endpoint check\n", + sc->name); return -EIO; } @@ -1921,8 +2008,7 @@ static int ub_probe(struct usb_interface *intf, const struct usb_device_id *dev_id) { struct ub_dev *sc; - request_queue_t *q; - struct gendisk *disk; + int nluns; int rc; int i; @@ -1931,6 +2017,7 @@ static int ub_probe(struct usb_interface *intf, goto err_core; memset(sc, 0, sizeof(struct ub_dev)); spin_lock_init(&sc->lock); + INIT_LIST_HEAD(&sc->luns); usb_init_urb(&sc->work_urb); tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc); atomic_set(&sc->poison, 0); @@ -1942,19 +2029,16 @@ static int ub_probe(struct usb_interface *intf, ub_init_completion(&sc->work_done); sc->work_done.done = 1; /* A little yuk, but oh well... */ - rc = -ENOSR; - if ((sc->id = ub_id_get()) == -1) - goto err_id; - snprintf(sc->name, 8, DRV_NAME "%c", sc->id + 'a'); - sc->dev = interface_to_usbdev(intf); sc->intf = intf; // sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; - usb_set_intfdata(intf, sc); usb_get_dev(sc->dev); // usb_get_intf(sc->intf); /* Do we need this? */ + snprintf(sc->name, 12, DRV_NAME "(%d.%d)", + sc->dev->bus->busnum, sc->dev->devnum); + /* XXX Verify that we can handle the device (from descriptors) */ ub_get_pipes(sc, sc->dev, intf); @@ -1992,35 +2076,88 @@ static int ub_probe(struct usb_interface *intf, * In any case it's not our business how revaliadation is implemented. */ for (i = 0; i < 3; i++) { /* Retries for benh's key */ - if ((rc = ub_sync_tur(sc)) <= 0) break; + if ((rc = ub_sync_tur(sc, NULL)) <= 0) break; if (rc != 0x6) break; msleep(10); } - sc->removable = 1; /* XXX Query this from the device */ - sc->changed = 1; /* ub_revalidate clears only */ - sc->first_open = 1; + nluns = 1; + for (i = 0; i < 3; i++) { + if ((rc = ub_sync_getmaxlun(sc)) < 0) { + /* + * Some devices (i.e. Iomega Zip100) need this -- + * apparently the bulk pipes get STALLed when the + * GetMaxLUN request is processed. + * XXX I have a ZIP-100, verify it does this. + */ + if (rc == -EPIPE) { + ub_probe_clear_stall(sc, sc->recv_bulk_pipe); + ub_probe_clear_stall(sc, sc->send_bulk_pipe); + } + break; + } + if (rc != 0) { + nluns = rc; + break; + } + mdelay(100); + } - ub_revalidate(sc); - /* This is pretty much a long term P3 */ - printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n", - sc->name, sc->dev->devnum, sc->capacity.nsec, sc->capacity.bsize); + for (i = 0; i < nluns; i++) { + ub_probe_lun(sc, i); + } + return 0; + + /* device_remove_file(&sc->intf->dev, &dev_attr_diag); */ +err_diag: + usb_set_intfdata(intf, NULL); + // usb_put_intf(sc->intf); + usb_put_dev(sc->dev); + kfree(sc); +err_core: + return rc; +} + +static int ub_probe_lun(struct ub_dev *sc, int lnum) +{ + struct ub_lun *lun; + request_queue_t *q; + struct gendisk *disk; + int rc; + + rc = -ENOMEM; + if ((lun = kmalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL) + goto err_alloc; + memset(lun, 0, sizeof(struct ub_lun)); + lun->num = lnum; + + rc = -ENOSR; + if ((lun->id = ub_id_get()) == -1) + goto err_id; + + lun->udev = sc; + list_add(&lun->link, &sc->luns); + + snprintf(lun->name, 16, DRV_NAME "%c(%d.%d.%d)", + lun->id + 'a', sc->dev->bus->busnum, sc->dev->devnum, lun->num); + + lun->removable = 1; /* XXX Query this from the device */ + lun->changed = 1; /* ub_revalidate clears only */ + lun->first_open = 1; + ub_revalidate(sc, lun); - /* - * Just one disk per sc currently, but maybe more. - */ rc = -ENOMEM; if ((disk = alloc_disk(UB_MINORS_PER_MAJOR)) == NULL) goto err_diskalloc; - sc->disk = disk; - sprintf(disk->disk_name, DRV_NAME "%c", sc->id + 'a'); - sprintf(disk->devfs_name, DEVFS_NAME "/%c", sc->id + 'a'); + lun->disk = disk; + sprintf(disk->disk_name, DRV_NAME "%c", lun->id + 'a'); + sprintf(disk->devfs_name, DEVFS_NAME "/%c", lun->id + 'a'); disk->major = UB_MAJOR; - disk->first_minor = sc->id * UB_MINORS_PER_MAJOR; + disk->first_minor = lun->id * UB_MINORS_PER_MAJOR; disk->fops = &ub_bd_fops; - disk->private_data = sc; - disk->driverfs_dev = &intf->dev; + disk->private_data = lun; + disk->driverfs_dev = &sc->intf->dev; /* XXX Many to one ok? */ rc = -ENOMEM; if ((q = blk_init_queue(ub_bd_rq_fn, &sc->lock)) == NULL) @@ -2028,28 +2165,17 @@ static int ub_probe(struct usb_interface *intf, disk->queue = q; - // blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask); + blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH); blk_queue_max_hw_segments(q, UB_MAX_REQ_SG); blk_queue_max_phys_segments(q, UB_MAX_REQ_SG); - // blk_queue_segment_boundary(q, CARM_SG_BOUNDARY); + blk_queue_segment_boundary(q, 0xffffffff); /* Dubious. */ blk_queue_max_sectors(q, UB_MAX_SECTORS); - blk_queue_hardsect_size(q, sc->capacity.bsize); - - /* - * This is a serious infraction, caused by a deficiency in the - * USB sg interface (usb_sg_wait()). We plan to remove this once - * we get mileage on the driver and can justify a change to USB API. - * See blk_queue_bounce_limit() to understand this part. - * - * XXX And I still need to be aware of the DMA mask in the HC. - */ - q->bounce_pfn = blk_max_low_pfn; - q->bounce_gfp = GFP_NOIO; + blk_queue_hardsect_size(q, lun->capacity.bsize); - q->queuedata = sc; + q->queuedata = lun; - set_capacity(disk, sc->capacity.nsec); - if (sc->removable) + set_capacity(disk, lun->capacity.nsec); + if (lun->removable) disk->flags |= GENHD_FL_REMOVABLE; add_disk(disk); @@ -2059,22 +2185,20 @@ static int ub_probe(struct usb_interface *intf, err_blkqinit: put_disk(disk); err_diskalloc: - device_remove_file(&sc->intf->dev, &dev_attr_diag); -err_diag: - usb_set_intfdata(intf, NULL); - // usb_put_intf(sc->intf); - usb_put_dev(sc->dev); - ub_id_put(sc->id); + list_del(&lun->link); + ub_id_put(lun->id); err_id: - kfree(sc); -err_core: + kfree(lun); +err_alloc: return rc; } static void ub_disconnect(struct usb_interface *intf) { struct ub_dev *sc = usb_get_intfdata(intf); - struct gendisk *disk = sc->disk; + struct list_head *p; + struct ub_lun *lun; + struct gendisk *disk; unsigned long flags; /* @@ -2124,14 +2248,18 @@ static void ub_disconnect(struct usb_interface *intf) /* * Unregister the upper layer. */ - if (disk->flags & GENHD_FL_UP) - del_gendisk(disk); - /* - * I wish I could do: - * set_bit(QUEUE_FLAG_DEAD, &q->queue_flags); - * As it is, we rely on our internal poisoning and let - * the upper levels to spin furiously failing all the I/O. - */ + list_for_each (p, &sc->luns) { + lun = list_entry(p, struct ub_lun, link); + disk = lun->disk; + if (disk->flags & GENHD_FL_UP) + del_gendisk(disk); + /* + * I wish I could do: + * set_bit(QUEUE_FLAG_DEAD, &q->queue_flags); + * As it is, we rely on our internal poisoning and let + * the upper levels to spin furiously failing all the I/O. + */ + } /* * Taking a lock on a structure which is about to be freed @@ -2182,8 +2310,8 @@ static int __init ub_init(void) { int rc; - /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu\n", - sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev)); + /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu ub_lun %zu\n", + sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev), sizeof(struct ub_lun)); if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0) goto err_regblkdev; diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index fcca26c89bb..38dd9ffbe8b 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -488,6 +488,20 @@ static int viocd_packet(struct cdrom_device_info *cdi, & (CDC_DVD_RAM | CDC_RAM)) != 0; } break; + case GPCMD_GET_CONFIGURATION: + if (cgc->cmd[3] == CDF_RWRT) { + struct rwrt_feature_desc *rfd = (struct rwrt_feature_desc *)(cgc->buffer + sizeof(struct feature_header)); + + if ((buflen >= + (sizeof(struct feature_header) + sizeof(*rfd))) && + (cdi->ops->capability & ~cdi->mask + & (CDC_DVD_RAM | CDC_RAM))) { + rfd->feature_code = cpu_to_be16(CDF_RWRT); + rfd->curr = 1; + ret = 0; + } + } + break; default: if (cgc->sense) { /* indicate Unknown code */ diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c index 49d67f5384a..6dc765dc541 100644 --- a/drivers/char/ipmi/ipmi_devintf.c +++ b/drivers/char/ipmi/ipmi_devintf.c @@ -44,6 +44,7 @@ #include <linux/ipmi.h> #include <asm/semaphore.h> #include <linux/init.h> +#include <linux/device.h> #define IPMI_DEVINTF_VERSION "v33" @@ -519,15 +520,21 @@ MODULE_PARM_DESC(ipmi_major, "Sets the major number of the IPMI device. By" " interface. Other values will set the major device number" " to that value."); +static struct class_simple *ipmi_class; + static void ipmi_new_smi(int if_num) { - devfs_mk_cdev(MKDEV(ipmi_major, if_num), - S_IFCHR | S_IRUSR | S_IWUSR, + dev_t dev = MKDEV(ipmi_major, if_num); + + devfs_mk_cdev(dev, S_IFCHR | S_IRUSR | S_IWUSR, "ipmidev/%d", if_num); + + class_simple_device_add(ipmi_class, dev, NULL, "ipmi%d", if_num); } static void ipmi_smi_gone(int if_num) { + class_simple_device_remove(MKDEV(ipmi_major, if_num)); devfs_remove("ipmidev/%d", if_num); } @@ -548,8 +555,15 @@ static __init int init_ipmi_devintf(void) printk(KERN_INFO "ipmi device interface version " IPMI_DEVINTF_VERSION "\n"); + ipmi_class = class_simple_create(THIS_MODULE, "ipmi"); + if (IS_ERR(ipmi_class)) { + printk(KERN_ERR "ipmi: can't register device class\n"); + return PTR_ERR(ipmi_class); + } + rv = register_chrdev(ipmi_major, DEVICE_NAME, &ipmi_fops); if (rv < 0) { + class_simple_destroy(ipmi_class); printk(KERN_ERR "ipmi: can't get major %d\n", ipmi_major); return rv; } @@ -563,6 +577,7 @@ static __init int init_ipmi_devintf(void) rv = ipmi_smi_watcher_register(&smi_watcher); if (rv) { unregister_chrdev(ipmi_major, DEVICE_NAME); + class_simple_destroy(ipmi_class); printk(KERN_WARNING "ipmi: can't register smi watcher\n"); return rv; } @@ -573,6 +588,7 @@ module_init(init_ipmi_devintf); static __exit void cleanup_ipmi(void) { + class_simple_destroy(ipmi_class); ipmi_smi_watcher_unregister(&smi_watcher); devfs_remove(DEVICE_NAME); unregister_chrdev(ipmi_major, DEVICE_NAME); diff --git a/drivers/char/raw.c b/drivers/char/raw.c index a2e33ec7961..ca5f42bcaad 100644 --- a/drivers/char/raw.c +++ b/drivers/char/raw.c @@ -122,7 +122,7 @@ raw_ioctl(struct inode *inode, struct file *filp, { struct block_device *bdev = filp->private_data; - return ioctl_by_bdev(bdev, command, arg); + return blkdev_ioctl(bdev->bd_inode, NULL, command, arg); } static void bind_device(struct raw_config_request *rq) diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c index c337978dc96..b14d642439e 100644 --- a/drivers/char/watchdog/i8xx_tco.c +++ b/drivers/char/watchdog/i8xx_tco.c @@ -382,6 +382,7 @@ static struct pci_device_id i8xx_tco_pci_tbl[] = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2, PCI_ANY_ID, PCI_ANY_ID, }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, PCI_ANY_ID, PCI_ANY_ID, }, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE (pci, i8xx_tco_pci_tbl); diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 95882bb1950..60c9be99c6d 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -46,6 +46,10 @@ config CPU_FREQ_STAT_DETAILS This will show detail CPU frequency translation table in sysfs file system +# Note that it is not currently possible to set the other governors (such as ondemand) +# as the default, since if they fail to initialise, cpufreq will be +# left in an undefined state. + choice prompt "Default CPUFreq governor" default CPU_FREQ_DEFAULT_GOV_USERSPACE if CPU_FREQ_SA1100 || CPU_FREQ_SA1110 @@ -115,4 +119,24 @@ config CPU_FREQ_GOV_ONDEMAND If in doubt, say N. +config CPU_FREQ_GOV_CONSERVATIVE + tristate "'conservative' cpufreq governor" + depends on CPU_FREQ + help + 'conservative' - this driver is rather similar to the 'ondemand' + governor both in its source code and its purpose, the difference is + its optimisation for better suitability in a battery powered + environment. The frequency is gracefully increased and decreased + rather than jumping to 100% when speed is required. + + If you have a desktop machine then you should really be considering + the 'ondemand' governor instead, however if you are using a laptop, + PDA or even an AMD64 based computer (due to the unacceptable + step-by-step latency issues between the minimum and maximum frequency + transitions in the CPU) you will probably want to use this governor. + + For details, take a look at linux/Documentation/cpu-freq. + + If in doubt, say N. + endif # CPU_FREQ diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 67b16e5a41a..71fc3b4173f 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_PERFORMANCE) += cpufreq_performance.o obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE) += cpufreq_powersave.o obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE) += cpufreq_userspace.o obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o +obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o # CPUfreq cross-arch helpers obj-$(CONFIG_CPU_FREQ_TABLE) += freq_table.o diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 8e561313d09..03b5fb2ddcf 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -258,7 +258,7 @@ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state) (likely(cpufreq_cpu_data[freqs->cpu]->cur)) && (unlikely(freqs->old != cpufreq_cpu_data[freqs->cpu]->cur))) { - printk(KERN_WARNING "Warning: CPU frequency is %u, " + dprintk(KERN_WARNING "Warning: CPU frequency is %u, " "cpufreq assumed %u kHz.\n", freqs->old, cpufreq_cpu_data[freqs->cpu]->cur); freqs->old = cpufreq_cpu_data[freqs->cpu]->cur; } @@ -814,7 +814,7 @@ static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq, unsigne { struct cpufreq_freqs freqs; - printk(KERN_WARNING "Warning: CPU frequency out of sync: cpufreq and timing " + dprintk(KERN_WARNING "Warning: CPU frequency out of sync: cpufreq and timing " "core thinks of %u, is %u kHz.\n", old_freq, new_freq); freqs.cpu = cpu; @@ -923,7 +923,7 @@ static int cpufreq_suspend(struct sys_device * sysdev, u32 state) struct cpufreq_freqs freqs; if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN)) - printk(KERN_DEBUG "Warning: CPU frequency is %u, " + dprintk(KERN_DEBUG "Warning: CPU frequency is %u, " "cpufreq assumed %u kHz.\n", cur_freq, cpu_policy->cur); @@ -1004,7 +1004,7 @@ static int cpufreq_resume(struct sys_device * sysdev) struct cpufreq_freqs freqs; if (!(cpufreq_driver->flags & CPUFREQ_PM_NO_WARN)) - printk(KERN_WARNING "Warning: CPU frequency" + dprintk(KERN_WARNING "Warning: CPU frequency" "is %u, cpufreq assumed %u kHz.\n", cur_freq, cpu_policy->cur); diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c new file mode 100644 index 00000000000..e1df376e709 --- /dev/null +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -0,0 +1,586 @@ +/* + * drivers/cpufreq/cpufreq_conservative.c + * + * Copyright (C) 2001 Russell King + * (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>. + * Jun Nakajima <jun.nakajima@intel.com> + * (C) 2004 Alexander Clouter <alex-kernel@digriz.org.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/smp.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ctype.h> +#include <linux/cpufreq.h> +#include <linux/sysctl.h> +#include <linux/types.h> +#include <linux/fs.h> +#include <linux/sysfs.h> +#include <linux/sched.h> +#include <linux/kmod.h> +#include <linux/workqueue.h> +#include <linux/jiffies.h> +#include <linux/kernel_stat.h> +#include <linux/percpu.h> + +/* + * dbs is used in this file as a shortform for demandbased switching + * It helps to keep variable names smaller, simpler + */ + +#define DEF_FREQUENCY_UP_THRESHOLD (80) +#define MIN_FREQUENCY_UP_THRESHOLD (0) +#define MAX_FREQUENCY_UP_THRESHOLD (100) + +#define DEF_FREQUENCY_DOWN_THRESHOLD (20) +#define MIN_FREQUENCY_DOWN_THRESHOLD (0) +#define MAX_FREQUENCY_DOWN_THRESHOLD (100) + +/* + * The polling frequency of this governor depends on the capability of + * the processor. Default polling frequency is 1000 times the transition + * latency of the processor. The governor will work on any processor with + * transition latency <= 10mS, using appropriate sampling + * rate. + * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL) + * this governor will not work. + * All times here are in uS. + */ +static unsigned int def_sampling_rate; +#define MIN_SAMPLING_RATE (def_sampling_rate / 2) +#define MAX_SAMPLING_RATE (500 * def_sampling_rate) +#define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (100000) +#define DEF_SAMPLING_DOWN_FACTOR (5) +#define TRANSITION_LATENCY_LIMIT (10 * 1000) + +static void do_dbs_timer(void *data); + +struct cpu_dbs_info_s { + struct cpufreq_policy *cur_policy; + unsigned int prev_cpu_idle_up; + unsigned int prev_cpu_idle_down; + unsigned int enable; +}; +static DEFINE_PER_CPU(struct cpu_dbs_info_s, cpu_dbs_info); + +static unsigned int dbs_enable; /* number of CPUs using this policy */ + +static DECLARE_MUTEX (dbs_sem); +static DECLARE_WORK (dbs_work, do_dbs_timer, NULL); + +struct dbs_tuners { + unsigned int sampling_rate; + unsigned int sampling_down_factor; + unsigned int up_threshold; + unsigned int down_threshold; + unsigned int ignore_nice; + unsigned int freq_step; +}; + +static struct dbs_tuners dbs_tuners_ins = { + .up_threshold = DEF_FREQUENCY_UP_THRESHOLD, + .down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD, + .sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR, +}; + +static inline unsigned int get_cpu_idle_time(unsigned int cpu) +{ + return kstat_cpu(cpu).cpustat.idle + + kstat_cpu(cpu).cpustat.iowait + + ( !dbs_tuners_ins.ignore_nice ? + kstat_cpu(cpu).cpustat.nice : + 0); +} + +/************************** sysfs interface ************************/ +static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf) +{ + return sprintf (buf, "%u\n", MAX_SAMPLING_RATE); +} + +static ssize_t show_sampling_rate_min(struct cpufreq_policy *policy, char *buf) +{ + return sprintf (buf, "%u\n", MIN_SAMPLING_RATE); +} + +#define define_one_ro(_name) \ +static struct freq_attr _name = \ +__ATTR(_name, 0444, show_##_name, NULL) + +define_one_ro(sampling_rate_max); +define_one_ro(sampling_rate_min); + +/* cpufreq_conservative Governor Tunables */ +#define show_one(file_name, object) \ +static ssize_t show_##file_name \ +(struct cpufreq_policy *unused, char *buf) \ +{ \ + return sprintf(buf, "%u\n", dbs_tuners_ins.object); \ +} +show_one(sampling_rate, sampling_rate); +show_one(sampling_down_factor, sampling_down_factor); +show_one(up_threshold, up_threshold); +show_one(down_threshold, down_threshold); +show_one(ignore_nice, ignore_nice); +show_one(freq_step, freq_step); + +static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + ret = sscanf (buf, "%u", &input); + if (ret != 1 ) + return -EINVAL; + + down(&dbs_sem); + dbs_tuners_ins.sampling_down_factor = input; + up(&dbs_sem); + + return count; +} + +static ssize_t store_sampling_rate(struct cpufreq_policy *unused, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + ret = sscanf (buf, "%u", &input); + + down(&dbs_sem); + if (ret != 1 || input > MAX_SAMPLING_RATE || input < MIN_SAMPLING_RATE) { + up(&dbs_sem); + return -EINVAL; + } + + dbs_tuners_ins.sampling_rate = input; + up(&dbs_sem); + + return count; +} + +static ssize_t store_up_threshold(struct cpufreq_policy *unused, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + ret = sscanf (buf, "%u", &input); + + down(&dbs_sem); + if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || + input < MIN_FREQUENCY_UP_THRESHOLD || + input <= dbs_tuners_ins.down_threshold) { + up(&dbs_sem); + return -EINVAL; + } + + dbs_tuners_ins.up_threshold = input; + up(&dbs_sem); + + return count; +} + +static ssize_t store_down_threshold(struct cpufreq_policy *unused, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + ret = sscanf (buf, "%u", &input); + + down(&dbs_sem); + if (ret != 1 || input > MAX_FREQUENCY_DOWN_THRESHOLD || + input < MIN_FREQUENCY_DOWN_THRESHOLD || + input >= dbs_tuners_ins.up_threshold) { + up(&dbs_sem); + return -EINVAL; + } + + dbs_tuners_ins.down_threshold = input; + up(&dbs_sem); + + return count; +} + +static ssize_t store_ignore_nice(struct cpufreq_policy *policy, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + + unsigned int j; + + ret = sscanf (buf, "%u", &input); + if ( ret != 1 ) + return -EINVAL; + + if ( input > 1 ) + input = 1; + + down(&dbs_sem); + if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */ + up(&dbs_sem); + return count; + } + dbs_tuners_ins.ignore_nice = input; + + /* we need to re-evaluate prev_cpu_idle_up and prev_cpu_idle_down */ + for_each_online_cpu(j) { + struct cpu_dbs_info_s *j_dbs_info; + j_dbs_info = &per_cpu(cpu_dbs_info, j); + j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j); + j_dbs_info->prev_cpu_idle_down = j_dbs_info->prev_cpu_idle_up; + } + up(&dbs_sem); + + return count; +} + +static ssize_t store_freq_step(struct cpufreq_policy *policy, + const char *buf, size_t count) +{ + unsigned int input; + int ret; + + ret = sscanf (buf, "%u", &input); + + if ( ret != 1 ) + return -EINVAL; + + if ( input > 100 ) + input = 100; + + /* no need to test here if freq_step is zero as the user might actually + * want this, they would be crazy though :) */ + down(&dbs_sem); + dbs_tuners_ins.freq_step = input; + up(&dbs_sem); + + return count; +} + +#define define_one_rw(_name) \ +static struct freq_attr _name = \ +__ATTR(_name, 0644, show_##_name, store_##_name) + +define_one_rw(sampling_rate); +define_one_rw(sampling_down_factor); +define_one_rw(up_threshold); +define_one_rw(down_threshold); +define_one_rw(ignore_nice); +define_one_rw(freq_step); + +static struct attribute * dbs_attributes[] = { + &sampling_rate_max.attr, + &sampling_rate_min.attr, + &sampling_rate.attr, + &sampling_down_factor.attr, + &up_threshold.attr, + &down_threshold.attr, + &ignore_nice.attr, + &freq_step.attr, + NULL +}; + +static struct attribute_group dbs_attr_group = { + .attrs = dbs_attributes, + .name = "conservative", +}; + +/************************** sysfs end ************************/ + +static void dbs_check_cpu(int cpu) +{ + unsigned int idle_ticks, up_idle_ticks, down_idle_ticks; + unsigned int freq_step; + unsigned int freq_down_sampling_rate; + static int down_skip[NR_CPUS]; + static int requested_freq[NR_CPUS]; + static unsigned short init_flag = 0; + struct cpu_dbs_info_s *this_dbs_info; + struct cpu_dbs_info_s *dbs_info; + + struct cpufreq_policy *policy; + unsigned int j; + + this_dbs_info = &per_cpu(cpu_dbs_info, cpu); + if (!this_dbs_info->enable) + return; + + policy = this_dbs_info->cur_policy; + + if ( init_flag == 0 ) { + for ( /* NULL */; init_flag < NR_CPUS; init_flag++ ) { + dbs_info = &per_cpu(cpu_dbs_info, init_flag); + requested_freq[cpu] = dbs_info->cur_policy->cur; + } + init_flag = 1; + } + + /* + * The default safe range is 20% to 80% + * Every sampling_rate, we check + * - If current idle time is less than 20%, then we try to + * increase frequency + * Every sampling_rate*sampling_down_factor, we check + * - If current idle time is more than 80%, then we try to + * decrease frequency + * + * Any frequency increase takes it to the maximum frequency. + * Frequency reduction happens at minimum steps of + * 5% (default) of max_frequency + */ + + /* Check for frequency increase */ + + idle_ticks = UINT_MAX; + for_each_cpu_mask(j, policy->cpus) { + unsigned int tmp_idle_ticks, total_idle_ticks; + struct cpu_dbs_info_s *j_dbs_info; + + j_dbs_info = &per_cpu(cpu_dbs_info, j); + /* Check for frequency increase */ + total_idle_ticks = get_cpu_idle_time(j); + tmp_idle_ticks = total_idle_ticks - + j_dbs_info->prev_cpu_idle_up; + j_dbs_info->prev_cpu_idle_up = total_idle_ticks; + + if (tmp_idle_ticks < idle_ticks) + idle_ticks = tmp_idle_ticks; + } + + /* Scale idle ticks by 100 and compare with up and down ticks */ + idle_ticks *= 100; + up_idle_ticks = (100 - dbs_tuners_ins.up_threshold) * + usecs_to_jiffies(dbs_tuners_ins.sampling_rate); + + if (idle_ticks < up_idle_ticks) { + down_skip[cpu] = 0; + for_each_cpu_mask(j, policy->cpus) { + struct cpu_dbs_info_s *j_dbs_info; + + j_dbs_info = &per_cpu(cpu_dbs_info, j); + j_dbs_info->prev_cpu_idle_down = + j_dbs_info->prev_cpu_idle_up; + } + /* if we are already at full speed then break out early */ + if (requested_freq[cpu] == policy->max) + return; + + freq_step = (dbs_tuners_ins.freq_step * policy->max) / 100; + + /* max freq cannot be less than 100. But who knows.... */ + if (unlikely(freq_step == 0)) + freq_step = 5; + + requested_freq[cpu] += freq_step; + if (requested_freq[cpu] > policy->max) + requested_freq[cpu] = policy->max; + + __cpufreq_driver_target(policy, requested_freq[cpu], + CPUFREQ_RELATION_H); + return; + } + + /* Check for frequency decrease */ + down_skip[cpu]++; + if (down_skip[cpu] < dbs_tuners_ins.sampling_down_factor) + return; + + idle_ticks = UINT_MAX; + for_each_cpu_mask(j, policy->cpus) { + unsigned int tmp_idle_ticks, total_idle_ticks; + struct cpu_dbs_info_s *j_dbs_info; + + j_dbs_info = &per_cpu(cpu_dbs_info, j); + total_idle_ticks = j_dbs_info->prev_cpu_idle_up; + tmp_idle_ticks = total_idle_ticks - + j_dbs_info->prev_cpu_idle_down; + j_dbs_info->prev_cpu_idle_down = total_idle_ticks; + + if (tmp_idle_ticks < idle_ticks) + idle_ticks = tmp_idle_ticks; + } + + /* Scale idle ticks by 100 and compare with up and down ticks */ + idle_ticks *= 100; + down_skip[cpu] = 0; + + freq_down_sampling_rate = dbs_tuners_ins.sampling_rate * + dbs_tuners_ins.sampling_down_factor; + down_idle_ticks = (100 - dbs_tuners_ins.down_threshold) * + usecs_to_jiffies(freq_down_sampling_rate); + + if (idle_ticks > down_idle_ticks) { + /* if we are already at the lowest speed then break out early + * or if we 'cannot' reduce the speed as the user might want + * freq_step to be zero */ + if (requested_freq[cpu] == policy->min + || dbs_tuners_ins.freq_step == 0) + return; + + freq_step = (dbs_tuners_ins.freq_step * policy->max) / 100; + + /* max freq cannot be less than 100. But who knows.... */ + if (unlikely(freq_step == 0)) + freq_step = 5; + + requested_freq[cpu] -= freq_step; + if (requested_freq[cpu] < policy->min) + requested_freq[cpu] = policy->min; + + __cpufreq_driver_target(policy, + requested_freq[cpu], + CPUFREQ_RELATION_H); + return; + } +} + +static void do_dbs_timer(void *data) +{ + int i; + down(&dbs_sem); + for_each_online_cpu(i) + dbs_check_cpu(i); + schedule_delayed_work(&dbs_work, + usecs_to_jiffies(dbs_tuners_ins.sampling_rate)); + up(&dbs_sem); +} + +static inline void dbs_timer_init(void) +{ + INIT_WORK(&dbs_work, do_dbs_timer, NULL); + schedule_delayed_work(&dbs_work, + usecs_to_jiffies(dbs_tuners_ins.sampling_rate)); + return; +} + +static inline void dbs_timer_exit(void) +{ + cancel_delayed_work(&dbs_work); + return; +} + +static int cpufreq_governor_dbs(struct cpufreq_policy *policy, + unsigned int event) +{ + unsigned int cpu = policy->cpu; + struct cpu_dbs_info_s *this_dbs_info; + unsigned int j; + + this_dbs_info = &per_cpu(cpu_dbs_info, cpu); + + switch (event) { + case CPUFREQ_GOV_START: + if ((!cpu_online(cpu)) || + (!policy->cur)) + return -EINVAL; + + if (policy->cpuinfo.transition_latency > + (TRANSITION_LATENCY_LIMIT * 1000)) + return -EINVAL; + if (this_dbs_info->enable) /* Already enabled */ + break; + + down(&dbs_sem); + for_each_cpu_mask(j, policy->cpus) { + struct cpu_dbs_info_s *j_dbs_info; + j_dbs_info = &per_cpu(cpu_dbs_info, j); + j_dbs_info->cur_policy = policy; + + j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j); + j_dbs_info->prev_cpu_idle_down + = j_dbs_info->prev_cpu_idle_up; + } + this_dbs_info->enable = 1; + sysfs_create_group(&policy->kobj, &dbs_attr_group); + dbs_enable++; + /* + * Start the timerschedule work, when this governor + * is used for first time + */ + if (dbs_enable == 1) { + unsigned int latency; + /* policy latency is in nS. Convert it to uS first */ + + latency = policy->cpuinfo.transition_latency; + if (latency < 1000) + latency = 1000; + + def_sampling_rate = (latency / 1000) * + DEF_SAMPLING_RATE_LATENCY_MULTIPLIER; + dbs_tuners_ins.sampling_rate = def_sampling_rate; + dbs_tuners_ins.ignore_nice = 0; + dbs_tuners_ins.freq_step = 5; + + dbs_timer_init(); + } + + up(&dbs_sem); + break; + + case CPUFREQ_GOV_STOP: + down(&dbs_sem); + this_dbs_info->enable = 0; + sysfs_remove_group(&policy->kobj, &dbs_attr_group); + dbs_enable--; + /* + * Stop the timerschedule work, when this governor + * is used for first time + */ + if (dbs_enable == 0) + dbs_timer_exit(); + + up(&dbs_sem); + + break; + + case CPUFREQ_GOV_LIMITS: + down(&dbs_sem); + if (policy->max < this_dbs_info->cur_policy->cur) + __cpufreq_driver_target( + this_dbs_info->cur_policy, + policy->max, CPUFREQ_RELATION_H); + else if (policy->min > this_dbs_info->cur_policy->cur) + __cpufreq_driver_target( + this_dbs_info->cur_policy, + policy->min, CPUFREQ_RELATION_L); + up(&dbs_sem); + break; + } + return 0; +} + +static struct cpufreq_governor cpufreq_gov_dbs = { + .name = "conservative", + .governor = cpufreq_governor_dbs, + .owner = THIS_MODULE, +}; + +static int __init cpufreq_gov_dbs_init(void) +{ + return cpufreq_register_governor(&cpufreq_gov_dbs); +} + +static void __exit cpufreq_gov_dbs_exit(void) +{ + /* Make sure that the scheduled work is indeed not running */ + flush_scheduled_work(); + + cpufreq_unregister_governor(&cpufreq_gov_dbs); +} + + +MODULE_AUTHOR ("Alexander Clouter <alex-kernel@digriz.org.uk>"); +MODULE_DESCRIPTION ("'cpufreq_conservative' - A dynamic cpufreq governor for " + "Low Latency Frequency Transition capable processors " + "optimised for use in a battery environment"); +MODULE_LICENSE ("GPL"); + +module_init(cpufreq_gov_dbs_init); +module_exit(cpufreq_gov_dbs_exit); diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 8d83a21c647..c1fc9c62bb5 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -34,13 +34,9 @@ */ #define DEF_FREQUENCY_UP_THRESHOLD (80) -#define MIN_FREQUENCY_UP_THRESHOLD (0) +#define MIN_FREQUENCY_UP_THRESHOLD (11) #define MAX_FREQUENCY_UP_THRESHOLD (100) -#define DEF_FREQUENCY_DOWN_THRESHOLD (20) -#define MIN_FREQUENCY_DOWN_THRESHOLD (0) -#define MAX_FREQUENCY_DOWN_THRESHOLD (100) - /* * The polling frequency of this governor depends on the capability of * the processor. Default polling frequency is 1000 times the transition @@ -55,9 +51,9 @@ static unsigned int def_sampling_rate; #define MIN_SAMPLING_RATE (def_sampling_rate / 2) #define MAX_SAMPLING_RATE (500 * def_sampling_rate) #define DEF_SAMPLING_RATE_LATENCY_MULTIPLIER (1000) -#define DEF_SAMPLING_DOWN_FACTOR (10) +#define DEF_SAMPLING_DOWN_FACTOR (1) +#define MAX_SAMPLING_DOWN_FACTOR (10) #define TRANSITION_LATENCY_LIMIT (10 * 1000) -#define sampling_rate_in_HZ(x) (((x * HZ) < (1000 * 1000))?1:((x * HZ) / (1000 * 1000))) static void do_dbs_timer(void *data); @@ -78,15 +74,23 @@ struct dbs_tuners { unsigned int sampling_rate; unsigned int sampling_down_factor; unsigned int up_threshold; - unsigned int down_threshold; + unsigned int ignore_nice; }; static struct dbs_tuners dbs_tuners_ins = { .up_threshold = DEF_FREQUENCY_UP_THRESHOLD, - .down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD, .sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR, }; +static inline unsigned int get_cpu_idle_time(unsigned int cpu) +{ + return kstat_cpu(cpu).cpustat.idle + + kstat_cpu(cpu).cpustat.iowait + + ( !dbs_tuners_ins.ignore_nice ? + kstat_cpu(cpu).cpustat.nice : + 0); +} + /************************** sysfs interface ************************/ static ssize_t show_sampling_rate_max(struct cpufreq_policy *policy, char *buf) { @@ -115,7 +119,7 @@ static ssize_t show_##file_name \ show_one(sampling_rate, sampling_rate); show_one(sampling_down_factor, sampling_down_factor); show_one(up_threshold, up_threshold); -show_one(down_threshold, down_threshold); +show_one(ignore_nice, ignore_nice); static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused, const char *buf, size_t count) @@ -126,6 +130,9 @@ static ssize_t store_sampling_down_factor(struct cpufreq_policy *unused, if (ret != 1 ) return -EINVAL; + if (input > MAX_SAMPLING_DOWN_FACTOR || input < 1) + return -EINVAL; + down(&dbs_sem); dbs_tuners_ins.sampling_down_factor = input; up(&dbs_sem); @@ -161,8 +168,7 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused, down(&dbs_sem); if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || - input < MIN_FREQUENCY_UP_THRESHOLD || - input <= dbs_tuners_ins.down_threshold) { + input < MIN_FREQUENCY_UP_THRESHOLD) { up(&dbs_sem); return -EINVAL; } @@ -173,22 +179,35 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused, return count; } -static ssize_t store_down_threshold(struct cpufreq_policy *unused, +static ssize_t store_ignore_nice(struct cpufreq_policy *policy, const char *buf, size_t count) { unsigned int input; int ret; + + unsigned int j; + ret = sscanf (buf, "%u", &input); + if ( ret != 1 ) + return -EINVAL; + if ( input > 1 ) + input = 1; + down(&dbs_sem); - if (ret != 1 || input > MAX_FREQUENCY_DOWN_THRESHOLD || - input < MIN_FREQUENCY_DOWN_THRESHOLD || - input >= dbs_tuners_ins.up_threshold) { + if ( input == dbs_tuners_ins.ignore_nice ) { /* nothing to do */ up(&dbs_sem); - return -EINVAL; + return count; } + dbs_tuners_ins.ignore_nice = input; - dbs_tuners_ins.down_threshold = input; + /* we need to re-evaluate prev_cpu_idle_up and prev_cpu_idle_down */ + for_each_online_cpu(j) { + struct cpu_dbs_info_s *j_dbs_info; + j_dbs_info = &per_cpu(cpu_dbs_info, j); + j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j); + j_dbs_info->prev_cpu_idle_down = j_dbs_info->prev_cpu_idle_up; + } up(&dbs_sem); return count; @@ -201,7 +220,7 @@ __ATTR(_name, 0644, show_##_name, store_##_name) define_one_rw(sampling_rate); define_one_rw(sampling_down_factor); define_one_rw(up_threshold); -define_one_rw(down_threshold); +define_one_rw(ignore_nice); static struct attribute * dbs_attributes[] = { &sampling_rate_max.attr, @@ -209,7 +228,7 @@ static struct attribute * dbs_attributes[] = { &sampling_rate.attr, &sampling_down_factor.attr, &up_threshold.attr, - &down_threshold.attr, + &ignore_nice.attr, NULL }; @@ -222,9 +241,8 @@ static struct attribute_group dbs_attr_group = { static void dbs_check_cpu(int cpu) { - unsigned int idle_ticks, up_idle_ticks, down_idle_ticks; - unsigned int total_idle_ticks; - unsigned int freq_down_step; + unsigned int idle_ticks, up_idle_ticks, total_ticks; + unsigned int freq_next; unsigned int freq_down_sampling_rate; static int down_skip[NR_CPUS]; struct cpu_dbs_info_s *this_dbs_info; @@ -238,38 +256,25 @@ static void dbs_check_cpu(int cpu) policy = this_dbs_info->cur_policy; /* - * The default safe range is 20% to 80% - * Every sampling_rate, we check - * - If current idle time is less than 20%, then we try to - * increase frequency - * Every sampling_rate*sampling_down_factor, we check - * - If current idle time is more than 80%, then we try to - * decrease frequency + * Every sampling_rate, we check, if current idle time is less + * than 20% (default), then we try to increase frequency + * Every sampling_rate*sampling_down_factor, we look for a the lowest + * frequency which can sustain the load while keeping idle time over + * 30%. If such a frequency exist, we try to decrease to this frequency. * * Any frequency increase takes it to the maximum frequency. * Frequency reduction happens at minimum steps of - * 5% of max_frequency + * 5% (default) of current frequency */ /* Check for frequency increase */ - total_idle_ticks = kstat_cpu(cpu).cpustat.idle + - kstat_cpu(cpu).cpustat.iowait; - idle_ticks = total_idle_ticks - - this_dbs_info->prev_cpu_idle_up; - this_dbs_info->prev_cpu_idle_up = total_idle_ticks; - - + idle_ticks = UINT_MAX; for_each_cpu_mask(j, policy->cpus) { - unsigned int tmp_idle_ticks; + unsigned int tmp_idle_ticks, total_idle_ticks; struct cpu_dbs_info_s *j_dbs_info; - if (j == cpu) - continue; - j_dbs_info = &per_cpu(cpu_dbs_info, j); - /* Check for frequency increase */ - total_idle_ticks = kstat_cpu(j).cpustat.idle + - kstat_cpu(j).cpustat.iowait; + total_idle_ticks = get_cpu_idle_time(j); tmp_idle_ticks = total_idle_ticks - j_dbs_info->prev_cpu_idle_up; j_dbs_info->prev_cpu_idle_up = total_idle_ticks; @@ -281,13 +286,23 @@ static void dbs_check_cpu(int cpu) /* Scale idle ticks by 100 and compare with up and down ticks */ idle_ticks *= 100; up_idle_ticks = (100 - dbs_tuners_ins.up_threshold) * - sampling_rate_in_HZ(dbs_tuners_ins.sampling_rate); + usecs_to_jiffies(dbs_tuners_ins.sampling_rate); if (idle_ticks < up_idle_ticks) { + down_skip[cpu] = 0; + for_each_cpu_mask(j, policy->cpus) { + struct cpu_dbs_info_s *j_dbs_info; + + j_dbs_info = &per_cpu(cpu_dbs_info, j); + j_dbs_info->prev_cpu_idle_down = + j_dbs_info->prev_cpu_idle_up; + } + /* if we are already at full speed then break out early */ + if (policy->cur == policy->max) + return; + __cpufreq_driver_target(policy, policy->max, CPUFREQ_RELATION_H); - down_skip[cpu] = 0; - this_dbs_info->prev_cpu_idle_down = total_idle_ticks; return; } @@ -296,23 +311,14 @@ static void dbs_check_cpu(int cpu) if (down_skip[cpu] < dbs_tuners_ins.sampling_down_factor) return; - total_idle_ticks = kstat_cpu(cpu).cpustat.idle + - kstat_cpu(cpu).cpustat.iowait; - idle_ticks = total_idle_ticks - - this_dbs_info->prev_cpu_idle_down; - this_dbs_info->prev_cpu_idle_down = total_idle_ticks; - + idle_ticks = UINT_MAX; for_each_cpu_mask(j, policy->cpus) { - unsigned int tmp_idle_ticks; + unsigned int tmp_idle_ticks, total_idle_ticks; struct cpu_dbs_info_s *j_dbs_info; - if (j == cpu) - continue; - j_dbs_info = &per_cpu(cpu_dbs_info, j); - /* Check for frequency increase */ - total_idle_ticks = kstat_cpu(j).cpustat.idle + - kstat_cpu(j).cpustat.iowait; + /* Check for frequency decrease */ + total_idle_ticks = j_dbs_info->prev_cpu_idle_up; tmp_idle_ticks = total_idle_ticks - j_dbs_info->prev_cpu_idle_down; j_dbs_info->prev_cpu_idle_down = total_idle_ticks; @@ -321,38 +327,37 @@ static void dbs_check_cpu(int cpu) idle_ticks = tmp_idle_ticks; } - /* Scale idle ticks by 100 and compare with up and down ticks */ - idle_ticks *= 100; down_skip[cpu] = 0; + /* if we cannot reduce the frequency anymore, break out early */ + if (policy->cur == policy->min) + return; + /* Compute how many ticks there are between two measurements */ freq_down_sampling_rate = dbs_tuners_ins.sampling_rate * dbs_tuners_ins.sampling_down_factor; - down_idle_ticks = (100 - dbs_tuners_ins.down_threshold) * - sampling_rate_in_HZ(freq_down_sampling_rate); + total_ticks = usecs_to_jiffies(freq_down_sampling_rate); - if (idle_ticks > down_idle_ticks ) { - freq_down_step = (5 * policy->max) / 100; - - /* max freq cannot be less than 100. But who knows.... */ - if (unlikely(freq_down_step == 0)) - freq_down_step = 5; + /* + * The optimal frequency is the frequency that is the lowest that + * can support the current CPU usage without triggering the up + * policy. To be safe, we focus 10 points under the threshold. + */ + freq_next = ((total_ticks - idle_ticks) * 100) / total_ticks; + freq_next = (freq_next * policy->cur) / + (dbs_tuners_ins.up_threshold - 10); - __cpufreq_driver_target(policy, - policy->cur - freq_down_step, - CPUFREQ_RELATION_H); - return; - } + if (freq_next <= ((policy->cur * 95) / 100)) + __cpufreq_driver_target(policy, freq_next, CPUFREQ_RELATION_L); } static void do_dbs_timer(void *data) { int i; down(&dbs_sem); - for (i = 0; i < NR_CPUS; i++) - if (cpu_online(i)) - dbs_check_cpu(i); + for_each_online_cpu(i) + dbs_check_cpu(i); schedule_delayed_work(&dbs_work, - sampling_rate_in_HZ(dbs_tuners_ins.sampling_rate)); + usecs_to_jiffies(dbs_tuners_ins.sampling_rate)); up(&dbs_sem); } @@ -360,7 +365,7 @@ static inline void dbs_timer_init(void) { INIT_WORK(&dbs_work, do_dbs_timer, NULL); schedule_delayed_work(&dbs_work, - sampling_rate_in_HZ(dbs_tuners_ins.sampling_rate)); + usecs_to_jiffies(dbs_tuners_ins.sampling_rate)); return; } @@ -397,12 +402,9 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, j_dbs_info = &per_cpu(cpu_dbs_info, j); j_dbs_info->cur_policy = policy; - j_dbs_info->prev_cpu_idle_up = - kstat_cpu(j).cpustat.idle + - kstat_cpu(j).cpustat.iowait; - j_dbs_info->prev_cpu_idle_down = - kstat_cpu(j).cpustat.idle + - kstat_cpu(j).cpustat.iowait; + j_dbs_info->prev_cpu_idle_up = get_cpu_idle_time(j); + j_dbs_info->prev_cpu_idle_down + = j_dbs_info->prev_cpu_idle_up; } this_dbs_info->enable = 1; sysfs_create_group(&policy->kobj, &dbs_attr_group); @@ -422,6 +424,7 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, def_sampling_rate = (latency / 1000) * DEF_SAMPLING_RATE_LATENCY_MULTIPLIER; dbs_tuners_ins.sampling_rate = def_sampling_rate; + dbs_tuners_ins.ignore_nice = 0; dbs_timer_init(); } @@ -461,12 +464,11 @@ static int cpufreq_governor_dbs(struct cpufreq_policy *policy, return 0; } -struct cpufreq_governor cpufreq_gov_dbs = { +static struct cpufreq_governor cpufreq_gov_dbs = { .name = "ondemand", .governor = cpufreq_governor_dbs, .owner = THIS_MODULE, }; -EXPORT_SYMBOL(cpufreq_gov_dbs); static int __init cpufreq_gov_dbs_init(void) { diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index 2084593937c..741b6b191e6 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -19,6 +19,7 @@ #include <linux/percpu.h> #include <linux/kobject.h> #include <linux/spinlock.h> +#include <asm/cputime.h> static spinlock_t cpufreq_stats_lock; @@ -29,20 +30,14 @@ static struct freq_attr _attr_##_name = {\ .show = _show,\ }; -static unsigned long -delta_time(unsigned long old, unsigned long new) -{ - return (old > new) ? (old - new): (new + ~old + 1); -} - struct cpufreq_stats { unsigned int cpu; unsigned int total_trans; - unsigned long long last_time; + unsigned long long last_time; unsigned int max_state; unsigned int state_num; unsigned int last_index; - unsigned long long *time_in_state; + cputime64_t *time_in_state; unsigned int *freq_table; #ifdef CONFIG_CPU_FREQ_STAT_DETAILS unsigned int *trans_table; @@ -60,12 +55,16 @@ static int cpufreq_stats_update (unsigned int cpu) { struct cpufreq_stats *stat; + unsigned long long cur_time; + + cur_time = get_jiffies_64(); spin_lock(&cpufreq_stats_lock); stat = cpufreq_stats_table[cpu]; if (stat->time_in_state) - stat->time_in_state[stat->last_index] += - delta_time(stat->last_time, jiffies); - stat->last_time = jiffies; + stat->time_in_state[stat->last_index] = + cputime64_add(stat->time_in_state[stat->last_index], + cputime_sub(cur_time, stat->last_time)); + stat->last_time = cur_time; spin_unlock(&cpufreq_stats_lock); return 0; } @@ -90,8 +89,8 @@ show_time_in_state(struct cpufreq_policy *policy, char *buf) return 0; cpufreq_stats_update(stat->cpu); for (i = 0; i < stat->state_num; i++) { - len += sprintf(buf + len, "%u %llu\n", - stat->freq_table[i], stat->time_in_state[i]); + len += sprintf(buf + len, "%u %llu\n", stat->freq_table[i], + (unsigned long long)cputime64_to_clock_t(stat->time_in_state[i])); } return len; } @@ -107,16 +106,30 @@ show_trans_table(struct cpufreq_policy *policy, char *buf) if(!stat) return 0; cpufreq_stats_update(stat->cpu); + len += snprintf(buf + len, PAGE_SIZE - len, " From : To\n"); + len += snprintf(buf + len, PAGE_SIZE - len, " : "); + for (i = 0; i < stat->state_num; i++) { + if (len >= PAGE_SIZE) + break; + len += snprintf(buf + len, PAGE_SIZE - len, "%9u ", + stat->freq_table[i]); + } + if (len >= PAGE_SIZE) + return len; + + len += snprintf(buf + len, PAGE_SIZE - len, "\n"); + for (i = 0; i < stat->state_num; i++) { if (len >= PAGE_SIZE) break; - len += snprintf(buf + len, PAGE_SIZE - len, "%9u:\t", + + len += snprintf(buf + len, PAGE_SIZE - len, "%9u: ", stat->freq_table[i]); for (j = 0; j < stat->state_num; j++) { if (len >= PAGE_SIZE) break; - len += snprintf(buf + len, PAGE_SIZE - len, "%u\t", + len += snprintf(buf + len, PAGE_SIZE - len, "%9u ", stat->trans_table[i*stat->max_state+j]); } len += snprintf(buf + len, PAGE_SIZE - len, "\n"); @@ -197,7 +210,7 @@ cpufreq_stats_create_table (struct cpufreq_policy *policy, count++; } - alloc_size = count * sizeof(int) + count * sizeof(long long); + alloc_size = count * sizeof(int) + count * sizeof(cputime64_t); #ifdef CONFIG_CPU_FREQ_STAT_DETAILS alloc_size += count * count * sizeof(int); @@ -224,7 +237,7 @@ cpufreq_stats_create_table (struct cpufreq_policy *policy, } stat->state_num = j; spin_lock(&cpufreq_stats_lock); - stat->last_time = jiffies; + stat->last_time = get_jiffies_64(); stat->last_index = freq_table_get_index(stat, policy->cur); spin_unlock(&cpufreq_stats_lock); cpufreq_cpu_put(data); diff --git a/drivers/firmware/pcdp.c b/drivers/firmware/pcdp.c index 6d5df6c2efa..df1b721154d 100644 --- a/drivers/firmware/pcdp.c +++ b/drivers/firmware/pcdp.c @@ -11,6 +11,7 @@ * published by the Free Software Foundation. */ +#include <linux/config.h> #include <linux/acpi.h> #include <linux/console.h> #include <linux/efi.h> diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index 35710818fe4..fdd881aee61 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -2,6 +2,7 @@ * i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge * * Copyright (C) 2004 Patrick Mochel + * 2005 Rudolf Marek <r.marek@sh.cvut.cz> * * The 1563 southbridge is deceptively similar to the 1533, with a * few notable exceptions. One of those happens to be the fact they @@ -57,10 +58,11 @@ #define HST_CNTL2_BLOCK 0x05 +#define HST_CNTL2_SIZEMASK 0x38 static unsigned short ali1563_smba; -static int ali1563_transaction(struct i2c_adapter * a) +static int ali1563_transaction(struct i2c_adapter * a, int size) { u32 data; int timeout; @@ -73,7 +75,7 @@ static int ali1563_transaction(struct i2c_adapter * a) data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) { - dev_warn(&a->dev,"ali1563: Trying to reset busy device\n"); + dev_err(&a->dev, "ali1563: Trying to reset busy device\n"); outb_p(data | HST_STS_BAD,SMB_HST_STS); data = inb_p(SMB_HST_STS); if (data & HST_STS_BAD) @@ -94,19 +96,31 @@ static int ali1563_transaction(struct i2c_adapter * a) if (timeout && !(data & HST_STS_BAD)) return 0; - dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n", - timeout ? "Timeout " : "", - data & HST_STS_FAIL ? "Transaction Failed " : "", - data & HST_STS_BUSERR ? "No response or Bus Collision " : "", - data & HST_STS_DEVERR ? "Device Error " : "", - !(data & HST_STS_DONE) ? "Transaction Never Finished " : ""); - if (!(data & HST_STS_DONE)) + if (!timeout) { + dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n"); /* Issue 'kill' to host controller */ outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2); - else - /* Issue timeout to reset all devices on bus */ + data = inb_p(SMB_HST_STS); + } + + /* device error - no response, ignore the autodetection case */ + if ((data & HST_STS_DEVERR) && (size != HST_CNTL2_QUICK)) { + dev_err(&a->dev, "Device error!\n"); + } + + /* bus collision */ + if (data & HST_STS_BUSERR) { + dev_err(&a->dev, "Bus collision!\n"); + /* Issue timeout, hoping it helps */ outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1); + } + + if (data & HST_STS_FAIL) { + dev_err(&a->dev, "Cleaning fail after KILL!\n"); + outb_p(0x0,SMB_HST_CNTL2); + } + return -1; } @@ -149,7 +163,7 @@ static int ali1563_block_start(struct i2c_adapter * a) if (timeout && !(data & HST_STS_BAD)) return 0; - dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n", + dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n", timeout ? "Timeout " : "", data & HST_STS_FAIL ? "Transaction Failed " : "", data & HST_STS_BUSERR ? "No response or Bus Collision " : "", @@ -242,13 +256,15 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr, } outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD); - outb_p(inb_p(SMB_HST_CNTL2) | (size << 3), SMB_HST_CNTL2); + outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | (size << 3), SMB_HST_CNTL2); /* Write the command register */ + switch(size) { case HST_CNTL2_BYTE: if (rw== I2C_SMBUS_WRITE) - outb_p(cmd, SMB_HST_CMD); + /* Beware it uses DAT0 register and not CMD! */ + outb_p(cmd, SMB_HST_DAT0); break; case HST_CNTL2_BYTE_DATA: outb_p(cmd, SMB_HST_CMD); @@ -268,7 +284,7 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr, goto Done; } - if ((error = ali1563_transaction(a))) + if ((error = ali1563_transaction(a, size))) goto Done; if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK)) diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c index dd0d4c46314..867d443e713 100644 --- a/drivers/i2c/busses/i2c-keywest.c +++ b/drivers/i2c/busses/i2c-keywest.c @@ -516,6 +516,11 @@ create_iface(struct device_node *np, struct device *dev) u32 *psteps, *prate; int rc; + if (np->n_intrs < 1 || np->n_addrs < 1) { + printk(KERN_ERR "%s: Missing interrupt or address !\n", + np->full_name); + return -ENODEV; + } if (pmac_low_i2c_lock(np)) return -ENODEV; diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 33a020faeab..39f3e9101ed 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1932,8 +1932,11 @@ static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq) /* * check if dma is safe + * + * NOTE! The "len" and "addr" checks should possibly have + * separate masks. */ - if ((rq->data_len & mask) || (addr & mask)) + if ((rq->data_len & 15) || (addr & mask)) info->dma = 0; } @@ -3255,16 +3258,12 @@ sector_t ide_cdrom_capacity (ide_drive_t *drive) return capacity * sectors_per_frame; } -static -int ide_cdrom_cleanup(ide_drive_t *drive) +static int ide_cd_remove(struct device *dev) { + ide_drive_t *drive = to_ide_device(dev); struct cdrom_info *info = drive->driver_data; - if (ide_unregister_subdriver(drive)) { - printk(KERN_ERR "%s: %s: failed to ide_unregister_subdriver\n", - __FUNCTION__, drive->name); - return 1; - } + ide_unregister_subdriver(drive, info->driver); del_gendisk(info->disk); @@ -3297,7 +3296,7 @@ static void ide_cd_release(struct kref *kref) kfree(info); } -static int ide_cdrom_attach (ide_drive_t *drive); +static int ide_cd_probe(struct device *); #ifdef CONFIG_PROC_FS static int proc_idecd_read_capacity @@ -3320,19 +3319,20 @@ static ide_proc_entry_t idecd_proc[] = { static ide_driver_t ide_cdrom_driver = { .owner = THIS_MODULE, - .name = "ide-cdrom", + .gen_driver = { + .name = "ide-cdrom", + .bus = &ide_bus_type, + .probe = ide_cd_probe, + .remove = ide_cd_remove, + }, .version = IDECD_VERSION, .media = ide_cdrom, - .busy = 0, .supports_dsc_overlap = 1, - .cleanup = ide_cdrom_cleanup, .do_request = ide_do_rw_cdrom, .end_request = ide_end_request, .error = __ide_error, .abort = __ide_abort, .proc = idecd_proc, - .attach = ide_cdrom_attach, - .drives = LIST_HEAD_INIT(ide_cdrom_driver.drives), }; static int idecd_open(struct inode * inode, struct file * file) @@ -3418,8 +3418,9 @@ static char *ignore = NULL; module_param(ignore, charp, 0400); MODULE_DESCRIPTION("ATAPI CD-ROM Driver"); -static int ide_cdrom_attach (ide_drive_t *drive) +static int ide_cd_probe(struct device *dev) { + ide_drive_t *drive = to_ide_device(dev); struct cdrom_info *info; struct gendisk *g; struct request_sense sense; @@ -3453,11 +3454,8 @@ static int ide_cdrom_attach (ide_drive_t *drive) ide_init_disk(g, drive); - if (ide_register_subdriver(drive, &ide_cdrom_driver)) { - printk(KERN_ERR "%s: Failed to register the driver with ide.c\n", - drive->name); - goto out_put_disk; - } + ide_register_subdriver(drive, &ide_cdrom_driver); + memset(info, 0, sizeof (struct cdrom_info)); kref_init(&info->kref); @@ -3470,7 +3468,6 @@ static int ide_cdrom_attach (ide_drive_t *drive) drive->driver_data = info; - DRIVER(drive)->busy++; g->minors = 1; snprintf(g->devfs_name, sizeof(g->devfs_name), "%s/cd", drive->devfs_name); @@ -3478,8 +3475,7 @@ static int ide_cdrom_attach (ide_drive_t *drive) g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE; if (ide_cdrom_setup(drive)) { struct cdrom_device_info *devinfo = &info->devinfo; - DRIVER(drive)->busy--; - ide_unregister_subdriver(drive); + ide_unregister_subdriver(drive, &ide_cdrom_driver); if (info->buffer != NULL) kfree(info->buffer); if (info->toc != NULL) @@ -3492,7 +3488,6 @@ static int ide_cdrom_attach (ide_drive_t *drive) drive->driver_data = NULL; goto failed; } - DRIVER(drive)->busy--; cdrom_read_toc(drive, &sense); g->fops = &idecd_ops; @@ -3500,23 +3495,20 @@ static int ide_cdrom_attach (ide_drive_t *drive) add_disk(g); return 0; -out_put_disk: - put_disk(g); out_free_cd: kfree(info); failed: - return 1; + return -ENODEV; } static void __exit ide_cdrom_exit(void) { - ide_unregister_driver(&ide_cdrom_driver); + driver_unregister(&ide_cdrom_driver.gen_driver); } static int ide_cdrom_init(void) { - ide_register_driver(&ide_cdrom_driver); - return 0; + return driver_register(&ide_cdrom_driver.gen_driver); } module_init(ide_cdrom_init); diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 5d54f775610..3302cd8eab4 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -1024,14 +1024,16 @@ static void ide_cacheflush_p(ide_drive_t *drive) printk(KERN_INFO "%s: wcache flush failed!\n", drive->name); } -static int idedisk_cleanup (ide_drive_t *drive) +static int ide_disk_remove(struct device *dev) { + ide_drive_t *drive = to_ide_device(dev); struct ide_disk_obj *idkp = drive->driver_data; struct gendisk *g = idkp->disk; ide_cacheflush_p(drive); - if (ide_unregister_subdriver(drive)) - return 1; + + ide_unregister_subdriver(drive, idkp->driver); + del_gendisk(g); ide_disk_put(idkp); @@ -1052,7 +1054,7 @@ static void ide_disk_release(struct kref *kref) kfree(idkp); } -static int idedisk_attach(ide_drive_t *drive); +static int ide_disk_probe(struct device *dev); static void ide_device_shutdown(struct device *dev) { @@ -1082,27 +1084,23 @@ static void ide_device_shutdown(struct device *dev) dev->bus->suspend(dev, PMSG_SUSPEND); } -/* - * IDE subdriver functions, registered with ide.c - */ static ide_driver_t idedisk_driver = { .owner = THIS_MODULE, .gen_driver = { + .name = "ide-disk", + .bus = &ide_bus_type, + .probe = ide_disk_probe, + .remove = ide_disk_remove, .shutdown = ide_device_shutdown, }, - .name = "ide-disk", .version = IDEDISK_VERSION, .media = ide_disk, - .busy = 0, .supports_dsc_overlap = 0, - .cleanup = idedisk_cleanup, .do_request = ide_do_rw_disk, .end_request = ide_end_request, .error = __ide_error, .abort = __ide_abort, .proc = idedisk_proc, - .attach = idedisk_attach, - .drives = LIST_HEAD_INIT(idedisk_driver.drives), }; static int idedisk_open(struct inode *inode, struct file *filp) @@ -1199,8 +1197,9 @@ static struct block_device_operations idedisk_ops = { MODULE_DESCRIPTION("ATA DISK Driver"); -static int idedisk_attach(ide_drive_t *drive) +static int ide_disk_probe(struct device *dev) { + ide_drive_t *drive = to_ide_device(dev); struct ide_disk_obj *idkp; struct gendisk *g; @@ -1222,10 +1221,7 @@ static int idedisk_attach(ide_drive_t *drive) ide_init_disk(g, drive); - if (ide_register_subdriver(drive, &idedisk_driver)) { - printk (KERN_ERR "ide-disk: %s: Failed to register the driver with ide.c\n", drive->name); - goto out_put_disk; - } + ide_register_subdriver(drive, &idedisk_driver); memset(idkp, 0, sizeof(*idkp)); @@ -1239,7 +1235,6 @@ static int idedisk_attach(ide_drive_t *drive) drive->driver_data = idkp; - DRIVER(drive)->busy++; idedisk_setup(drive); if ((!drive->head || drive->head > 16) && !drive->select.b.lba) { printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n", @@ -1247,7 +1242,7 @@ static int idedisk_attach(ide_drive_t *drive) drive->attach = 0; } else drive->attach = 1; - DRIVER(drive)->busy--; + g->minors = 1 << PARTN_BITS; strcpy(g->devfs_name, drive->devfs_name); g->driverfs_dev = &drive->gendev; @@ -1257,22 +1252,20 @@ static int idedisk_attach(ide_drive_t *drive) add_disk(g); return 0; -out_put_disk: - put_disk(g); out_free_idkp: kfree(idkp); failed: - return 1; + return -ENODEV; } static void __exit idedisk_exit (void) { - ide_unregister_driver(&idedisk_driver); + driver_unregister(&idedisk_driver.gen_driver); } static int idedisk_init (void) { - return ide_register_driver(&idedisk_driver); + return driver_register(&idedisk_driver.gen_driver); } module_init(idedisk_init); diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 36c0b74a4e4..c949e98df4b 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1865,13 +1865,13 @@ static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy) idefloppy_add_settings(drive); } -static int idefloppy_cleanup (ide_drive_t *drive) +static int ide_floppy_remove(struct device *dev) { + ide_drive_t *drive = to_ide_device(dev); idefloppy_floppy_t *floppy = drive->driver_data; struct gendisk *g = floppy->disk; - if (ide_unregister_subdriver(drive)) - return 1; + ide_unregister_subdriver(drive, floppy->driver); del_gendisk(g); @@ -1916,26 +1916,24 @@ static ide_proc_entry_t idefloppy_proc[] = { #endif /* CONFIG_PROC_FS */ -static int idefloppy_attach(ide_drive_t *drive); +static int ide_floppy_probe(struct device *); -/* - * IDE subdriver functions, registered with ide.c - */ static ide_driver_t idefloppy_driver = { .owner = THIS_MODULE, - .name = "ide-floppy", + .gen_driver = { + .name = "ide-floppy", + .bus = &ide_bus_type, + .probe = ide_floppy_probe, + .remove = ide_floppy_remove, + }, .version = IDEFLOPPY_VERSION, .media = ide_floppy, - .busy = 0, .supports_dsc_overlap = 0, - .cleanup = idefloppy_cleanup, .do_request = idefloppy_do_request, .end_request = idefloppy_do_end_request, .error = __ide_error, .abort = __ide_abort, .proc = idefloppy_proc, - .attach = idefloppy_attach, - .drives = LIST_HEAD_INIT(idefloppy_driver.drives), }; static int idefloppy_open(struct inode *inode, struct file *filp) @@ -2122,8 +2120,9 @@ static struct block_device_operations idefloppy_ops = { .revalidate_disk= idefloppy_revalidate_disk }; -static int idefloppy_attach (ide_drive_t *drive) +static int ide_floppy_probe(struct device *dev) { + ide_drive_t *drive = to_ide_device(dev); idefloppy_floppy_t *floppy; struct gendisk *g; @@ -2152,10 +2151,7 @@ static int idefloppy_attach (ide_drive_t *drive) ide_init_disk(g, drive); - if (ide_register_subdriver(drive, &idefloppy_driver)) { - printk (KERN_ERR "ide-floppy: %s: Failed to register the driver with ide.c\n", drive->name); - goto out_put_disk; - } + ide_register_subdriver(drive, &idefloppy_driver); memset(floppy, 0, sizeof(*floppy)); @@ -2169,9 +2165,8 @@ static int idefloppy_attach (ide_drive_t *drive) drive->driver_data = floppy; - DRIVER(drive)->busy++; idefloppy_setup (drive, floppy); - DRIVER(drive)->busy--; + g->minors = 1 << PARTN_BITS; g->driverfs_dev = &drive->gendev; strcpy(g->devfs_name, drive->devfs_name); @@ -2181,19 +2176,17 @@ static int idefloppy_attach (ide_drive_t *drive) add_disk(g); return 0; -out_put_disk: - put_disk(g); out_free_floppy: kfree(floppy); failed: - return 1; + return -ENODEV; } MODULE_DESCRIPTION("ATAPI FLOPPY Driver"); static void __exit idefloppy_exit (void) { - ide_unregister_driver(&idefloppy_driver); + driver_unregister(&idefloppy_driver.gen_driver); } /* @@ -2202,8 +2195,7 @@ static void __exit idefloppy_exit (void) static int idefloppy_init (void) { printk("ide-floppy driver " IDEFLOPPY_VERSION "\n"); - ide_register_driver(&idefloppy_driver); - return 0; + return driver_register(&idefloppy_driver.gen_driver); } module_init(idefloppy_init); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 554473a95cf..5d876f53c69 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -47,6 +47,7 @@ #include <linux/slab.h> #include <linux/delay.h> #include <linux/ide.h> +#include <linux/devfs_fs_kernel.h> #include <linux/spinlock.h> #include <linux/kmod.h> #include <linux/pci.h> @@ -696,13 +697,13 @@ static int wait_hwif_ready(ide_hwif_t *hwif) SELECT_DRIVE(&hwif->drives[0]); hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); mdelay(2); - rc = ide_wait_not_busy(hwif, 10000); + rc = ide_wait_not_busy(hwif, 35000); if (rc) return rc; SELECT_DRIVE(&hwif->drives[1]); hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); mdelay(2); - rc = ide_wait_not_busy(hwif, 10000); + rc = ide_wait_not_busy(hwif, 35000); /* Exit function with master reselected (let's be sane) */ SELECT_DRIVE(&hwif->drives[0]); @@ -918,7 +919,7 @@ int probe_hwif_init_with_fixup(ide_hwif_t *hwif, void (*fixup)(ide_hwif_t *hwif) want them on default or a new "empty" class for hotplug reprobing ? */ if (drive->present) { - ata_attach(drive); + device_register(&drive->gendev); } } } @@ -1279,10 +1280,51 @@ void ide_init_disk(struct gendisk *disk, ide_drive_t *drive) EXPORT_SYMBOL_GPL(ide_init_disk); +static void ide_remove_drive_from_hwgroup(ide_drive_t *drive) +{ + ide_hwgroup_t *hwgroup = drive->hwif->hwgroup; + + if (drive == drive->next) { + /* special case: last drive from hwgroup. */ + BUG_ON(hwgroup->drive != drive); + hwgroup->drive = NULL; + } else { + ide_drive_t *walk; + + walk = hwgroup->drive; + while (walk->next != drive) + walk = walk->next; + walk->next = drive->next; + if (hwgroup->drive == drive) { + hwgroup->drive = drive->next; + hwgroup->hwif = hwgroup->drive->hwif; + } + } + BUG_ON(hwgroup->drive == drive); +} + static void drive_release_dev (struct device *dev) { ide_drive_t *drive = container_of(dev, ide_drive_t, gendev); + spin_lock_irq(&ide_lock); + if (drive->devfs_name[0] != '\0') { + devfs_remove(drive->devfs_name); + drive->devfs_name[0] = '\0'; + } + ide_remove_drive_from_hwgroup(drive); + if (drive->id != NULL) { + kfree(drive->id); + drive->id = NULL; + } + drive->present = 0; + /* Messed up locking ... */ + spin_unlock_irq(&ide_lock); + blk_cleanup_queue(drive->queue); + spin_lock_irq(&ide_lock); + drive->queue = NULL; + spin_unlock_irq(&ide_lock); + up(&drive->gendev_rel_sem); } @@ -1306,7 +1348,6 @@ static void init_gendisk (ide_hwif_t *hwif) drive->gendev.driver_data = drive; drive->gendev.release = drive_release_dev; if (drive->present) { - device_register(&drive->gendev); sprintf(drive->devfs_name, "ide/host%d/bus%d/target%d/lun%d", (hwif->channel && hwif->mate) ? hwif->mate->index : hwif->index, @@ -1412,7 +1453,7 @@ int ideprobe_init (void) hwif->chipset = ide_generic; for (unit = 0; unit < MAX_DRIVES; ++unit) if (hwif->drives[unit].present) - ata_attach(&hwif->drives[unit]); + device_register(&hwif->drives[unit].gendev); } } return 0; diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index bdff5ac5805..4063d2c34e3 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -307,17 +307,41 @@ static int proc_ide_read_driver (char *page, char **start, off_t off, int count, int *eof, void *data) { ide_drive_t *drive = (ide_drive_t *) data; - ide_driver_t *driver = drive->driver; + struct device *dev = &drive->gendev; + ide_driver_t *ide_drv; int len; - if (driver) { + down_read(&dev->bus->subsys.rwsem); + if (dev->driver) { + ide_drv = container_of(dev->driver, ide_driver_t, gen_driver); len = sprintf(page, "%s version %s\n", - driver->name, driver->version); + dev->driver->name, ide_drv->version); } else len = sprintf(page, "ide-default version 0.9.newide\n"); + up_read(&dev->bus->subsys.rwsem); PROC_IDE_READ_RETURN(page,start,off,count,eof,len); } +static int ide_replace_subdriver(ide_drive_t *drive, const char *driver) +{ + struct device *dev = &drive->gendev; + int ret = 1; + + down_write(&dev->bus->subsys.rwsem); + device_release_driver(dev); + /* FIXME: device can still be in use by previous driver */ + strlcpy(drive->driver_req, driver, sizeof(drive->driver_req)); + device_attach(dev); + drive->driver_req[0] = 0; + if (dev->driver == NULL) + device_attach(dev); + if (dev->driver && !strcmp(dev->driver->name, driver)) + ret = 0; + up_write(&dev->bus->subsys.rwsem); + + return ret; +} + static int proc_ide_write_driver (struct file *file, const char __user *buffer, unsigned long count, void *data) { @@ -488,16 +512,32 @@ void destroy_proc_ide_interface(ide_hwif_t *hwif) } } -extern struct seq_operations ide_drivers_op; +static int proc_print_driver(struct device_driver *drv, void *data) +{ + ide_driver_t *ide_drv = container_of(drv, ide_driver_t, gen_driver); + struct seq_file *s = data; + + seq_printf(s, "%s version %s\n", drv->name, ide_drv->version); + + return 0; +} + +static int ide_drivers_show(struct seq_file *s, void *p) +{ + bus_for_each_drv(&ide_bus_type, NULL, s, proc_print_driver); + return 0; +} + static int ide_drivers_open(struct inode *inode, struct file *file) { - return seq_open(file, &ide_drivers_op); + return single_open(file, &ide_drivers_show, NULL); } + static struct file_operations ide_drivers_operations = { .open = ide_drivers_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = single_release, }; void proc_ide_create(void) @@ -516,6 +556,6 @@ void proc_ide_create(void) void proc_ide_destroy(void) { - remove_proc_entry("ide/drivers", proc_ide_root); + remove_proc_entry("drivers", proc_ide_root); remove_proc_entry("ide", NULL); } diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 48254485498..5a3dc46008e 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -4681,21 +4681,12 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) idetape_add_settings(drive); } -static int idetape_cleanup (ide_drive_t *drive) +static int ide_tape_remove(struct device *dev) { + ide_drive_t *drive = to_ide_device(dev); idetape_tape_t *tape = drive->driver_data; - unsigned long flags; - - spin_lock_irqsave(&ide_lock, flags); - if (test_bit(IDETAPE_BUSY, &tape->flags) || drive->usage || - tape->first_stage != NULL || tape->merge_stage_size) { - spin_unlock_irqrestore(&ide_lock, flags); - return 1; - } - spin_unlock_irqrestore(&ide_lock, flags); - DRIVER(drive)->busy = 0; - (void) ide_unregister_subdriver(drive); + ide_unregister_subdriver(drive, tape->driver); ide_unregister_region(tape->disk); @@ -4710,6 +4701,8 @@ static void ide_tape_release(struct kref *kref) ide_drive_t *drive = tape->drive; struct gendisk *g = tape->disk; + BUG_ON(tape->first_stage != NULL || tape->merge_stage_size); + drive->dsc_overlap = 0; drive->driver_data = NULL; devfs_remove("%s/mt", drive->devfs_name); @@ -4747,26 +4740,24 @@ static ide_proc_entry_t idetape_proc[] = { #endif -static int idetape_attach(ide_drive_t *drive); +static int ide_tape_probe(struct device *); -/* - * IDE subdriver functions, registered with ide.c - */ static ide_driver_t idetape_driver = { .owner = THIS_MODULE, - .name = "ide-tape", + .gen_driver = { + .name = "ide-tape", + .bus = &ide_bus_type, + .probe = ide_tape_probe, + .remove = ide_tape_remove, + }, .version = IDETAPE_VERSION, .media = ide_tape, - .busy = 1, .supports_dsc_overlap = 1, - .cleanup = idetape_cleanup, .do_request = idetape_do_request, .end_request = idetape_end_request, .error = __ide_error, .abort = __ide_abort, .proc = idetape_proc, - .attach = idetape_attach, - .drives = LIST_HEAD_INIT(idetape_driver.drives), }; /* @@ -4829,8 +4820,9 @@ static struct block_device_operations idetape_block_ops = { .ioctl = idetape_ioctl, }; -static int idetape_attach (ide_drive_t *drive) +static int ide_tape_probe(struct device *dev) { + ide_drive_t *drive = to_ide_device(dev); idetape_tape_t *tape; struct gendisk *g; int minor; @@ -4865,10 +4857,7 @@ static int idetape_attach (ide_drive_t *drive) ide_init_disk(g, drive); - if (ide_register_subdriver(drive, &idetape_driver)) { - printk(KERN_ERR "ide-tape: %s: Failed to register the driver with ide.c\n", drive->name); - goto out_put_disk; - } + ide_register_subdriver(drive, &idetape_driver); memset(tape, 0, sizeof(*tape)); @@ -4902,12 +4891,11 @@ static int idetape_attach (ide_drive_t *drive) ide_register_region(g); return 0; -out_put_disk: - put_disk(g); + out_free_tape: kfree(tape); failed: - return 1; + return -ENODEV; } MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver"); @@ -4915,7 +4903,7 @@ MODULE_LICENSE("GPL"); static void __exit idetape_exit (void) { - ide_unregister_driver(&idetape_driver); + driver_unregister(&idetape_driver.gen_driver); unregister_chrdev(IDETAPE_MAJOR, "ht"); } @@ -4928,8 +4916,7 @@ static int idetape_init (void) printk(KERN_ERR "ide-tape: Failed to register character device interface\n"); return -EBUSY; } - ide_register_driver(&idetape_driver); - return 0; + return driver_register(&idetape_driver.gen_driver); } module_init(idetape_init); diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 973dec799b5..dae1bd5b8c3 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -196,8 +196,6 @@ ide_hwif_t ide_hwifs[MAX_HWIFS]; /* master data repository */ EXPORT_SYMBOL(ide_hwifs); -static struct list_head ide_drives = LIST_HEAD_INIT(ide_drives); - /* * Do not even *think* about calling this! */ @@ -358,54 +356,6 @@ static int ide_system_bus_speed(void) return system_bus_speed; } -/* - * drives_lock protects the list of drives, drivers_lock the - * list of drivers. Currently nobody takes both at once. - */ - -static DEFINE_SPINLOCK(drives_lock); -static DEFINE_SPINLOCK(drivers_lock); -static LIST_HEAD(drivers); - -/* Iterator for the driver list. */ - -static void *m_start(struct seq_file *m, loff_t *pos) -{ - struct list_head *p; - loff_t l = *pos; - spin_lock(&drivers_lock); - list_for_each(p, &drivers) - if (!l--) - return list_entry(p, ide_driver_t, drivers); - return NULL; -} - -static void *m_next(struct seq_file *m, void *v, loff_t *pos) -{ - struct list_head *p = ((ide_driver_t *)v)->drivers.next; - (*pos)++; - return p==&drivers ? NULL : list_entry(p, ide_driver_t, drivers); -} - -static void m_stop(struct seq_file *m, void *v) -{ - spin_unlock(&drivers_lock); -} - -static int show_driver(struct seq_file *m, void *v) -{ - ide_driver_t *driver = v; - seq_printf(m, "%s version %s\n", driver->name, driver->version); - return 0; -} - -struct seq_operations ide_drivers_op = { - .start = m_start, - .next = m_next, - .stop = m_stop, - .show = show_driver -}; - #ifdef CONFIG_PROC_FS struct proc_dir_entry *proc_ide_root; #endif @@ -630,7 +580,7 @@ void ide_unregister(unsigned int index) ide_hwif_t *hwif, *g; static ide_hwif_t tmp_hwif; /* protected by ide_cfg_sem */ ide_hwgroup_t *hwgroup; - int irq_count = 0, unit, i; + int irq_count = 0, unit; BUG_ON(index >= MAX_HWIFS); @@ -643,23 +593,22 @@ void ide_unregister(unsigned int index) goto abort; for (unit = 0; unit < MAX_DRIVES; ++unit) { drive = &hwif->drives[unit]; - if (!drive->present) + if (!drive->present) { + if (drive->devfs_name[0] != '\0') { + devfs_remove(drive->devfs_name); + drive->devfs_name[0] = '\0'; + } continue; - if (drive->usage || DRIVER(drive)->busy) - goto abort; - drive->dead = 1; + } + spin_unlock_irq(&ide_lock); + device_unregister(&drive->gendev); + down(&drive->gendev_rel_sem); + spin_lock_irq(&ide_lock); } hwif->present = 0; spin_unlock_irq(&ide_lock); - for (unit = 0; unit < MAX_DRIVES; ++unit) { - drive = &hwif->drives[unit]; - if (!drive->present) - continue; - DRIVER(drive)->cleanup(drive); - } - destroy_proc_ide_interface(hwif); hwgroup = hwif->hwgroup; @@ -687,44 +636,6 @@ void ide_unregister(unsigned int index) * Remove us from the hwgroup, and free * the hwgroup if we were the only member */ - for (i = 0; i < MAX_DRIVES; ++i) { - drive = &hwif->drives[i]; - if (drive->devfs_name[0] != '\0') { - devfs_remove(drive->devfs_name); - drive->devfs_name[0] = '\0'; - } - if (!drive->present) - continue; - if (drive == drive->next) { - /* special case: last drive from hwgroup. */ - BUG_ON(hwgroup->drive != drive); - hwgroup->drive = NULL; - } else { - ide_drive_t *walk; - - walk = hwgroup->drive; - while (walk->next != drive) - walk = walk->next; - walk->next = drive->next; - if (hwgroup->drive == drive) { - hwgroup->drive = drive->next; - hwgroup->hwif = HWIF(hwgroup->drive); - } - } - BUG_ON(hwgroup->drive == drive); - if (drive->id != NULL) { - kfree(drive->id); - drive->id = NULL; - } - drive->present = 0; - /* Messed up locking ... */ - spin_unlock_irq(&ide_lock); - blk_cleanup_queue(drive->queue); - device_unregister(&drive->gendev); - down(&drive->gendev_rel_sem); - spin_lock_irq(&ide_lock); - drive->queue = NULL; - } if (hwif->next == hwif) { BUG_ON(hwgroup->hwif != hwif); kfree(hwgroup); @@ -1304,73 +1215,6 @@ int system_bus_clock (void) EXPORT_SYMBOL(system_bus_clock); -/* - * Locking is badly broken here - since way back. That sucker is - * root-only, but that's not an excuse... The real question is what - * exclusion rules do we want here. - */ -int ide_replace_subdriver (ide_drive_t *drive, const char *driver) -{ - if (!drive->present || drive->usage || drive->dead) - goto abort; - if (DRIVER(drive)->cleanup(drive)) - goto abort; - strlcpy(drive->driver_req, driver, sizeof(drive->driver_req)); - if (ata_attach(drive)) { - spin_lock(&drives_lock); - list_del_init(&drive->list); - spin_unlock(&drives_lock); - drive->driver_req[0] = 0; - ata_attach(drive); - } else { - drive->driver_req[0] = 0; - } - if (drive->driver && !strcmp(drive->driver->name, driver)) - return 0; -abort: - return 1; -} - -/** - * ata_attach - attach an ATA/ATAPI device - * @drive: drive to attach - * - * Takes a drive that is as yet not assigned to any midlayer IDE - * driver (or is assigned to the default driver) and figures out - * which driver would like to own it. If nobody claims the drive - * then it is automatically attached to the default driver used for - * unclaimed objects. - * - * A return of zero indicates attachment to a driver, of one - * attachment to the default driver. - * - * Takes drivers_lock. - */ - -int ata_attach(ide_drive_t *drive) -{ - struct list_head *p; - spin_lock(&drivers_lock); - list_for_each(p, &drivers) { - ide_driver_t *driver = list_entry(p, ide_driver_t, drivers); - if (!try_module_get(driver->owner)) - continue; - spin_unlock(&drivers_lock); - if (driver->attach(drive) == 0) { - module_put(driver->owner); - drive->gendev.driver = &driver->gen_driver; - return 0; - } - spin_lock(&drivers_lock); - module_put(driver->owner); - } - drive->gendev.driver = NULL; - spin_unlock(&drivers_lock); - if (ide_register_subdriver(drive, NULL)) - panic("ide: default attach failed"); - return 1; -} - static int generic_ide_suspend(struct device *dev, pm_message_t state) { ide_drive_t *drive = dev->driver_data; @@ -2013,27 +1857,11 @@ static void __init probe_for_hwifs (void) #endif } -int ide_register_subdriver(ide_drive_t *drive, ide_driver_t *driver) +void ide_register_subdriver(ide_drive_t *drive, ide_driver_t *driver) { - unsigned long flags; - - spin_lock_irqsave(&ide_lock, flags); - if (!drive->present || drive->driver != NULL || - drive->usage || drive->dead) { - spin_unlock_irqrestore(&ide_lock, flags); - return 1; - } - drive->driver = driver; - spin_unlock_irqrestore(&ide_lock, flags); - spin_lock(&drives_lock); - list_add_tail(&drive->list, driver ? &driver->drives : &ide_drives); - spin_unlock(&drives_lock); -// printk(KERN_INFO "%s: attached %s driver.\n", drive->name, driver->name); #ifdef CONFIG_PROC_FS - if (driver) - ide_add_proc_entries(drive->proc, driver->proc, drive); + ide_add_proc_entries(drive->proc, driver->proc, drive); #endif - return 0; } EXPORT_SYMBOL(ide_register_subdriver); @@ -2041,136 +1869,51 @@ EXPORT_SYMBOL(ide_register_subdriver); /** * ide_unregister_subdriver - disconnect drive from driver * @drive: drive to unplug + * @driver: driver * * Disconnect a drive from the driver it was attached to and then * clean up the various proc files and other objects attached to it. * - * Takes ide_setting_sem, ide_lock and drives_lock. + * Takes ide_setting_sem and ide_lock. * Caller must hold none of the locks. - * - * No locking versus subdriver unload because we are moving to the - * default driver anyway. Wants double checking. */ -int ide_unregister_subdriver (ide_drive_t *drive) +void ide_unregister_subdriver(ide_drive_t *drive, ide_driver_t *driver) { unsigned long flags; down(&ide_setting_sem); spin_lock_irqsave(&ide_lock, flags); - if (drive->usage || drive->driver == NULL || DRIVER(drive)->busy) { - spin_unlock_irqrestore(&ide_lock, flags); - up(&ide_setting_sem); - return 1; - } #ifdef CONFIG_PROC_FS - ide_remove_proc_entries(drive->proc, DRIVER(drive)->proc); + ide_remove_proc_entries(drive->proc, driver->proc); #endif auto_remove_settings(drive); - drive->driver = NULL; spin_unlock_irqrestore(&ide_lock, flags); up(&ide_setting_sem); - spin_lock(&drives_lock); - list_del_init(&drive->list); - spin_unlock(&drives_lock); - /* drive will be added to &ide_drives in ata_attach() */ - return 0; } EXPORT_SYMBOL(ide_unregister_subdriver); -static int ide_drive_remove(struct device * dev) -{ - ide_drive_t * drive = container_of(dev,ide_drive_t,gendev); - DRIVER(drive)->cleanup(drive); - return 0; -} - -/** - * ide_register_driver - register IDE device driver - * @driver: the IDE device driver - * - * Register a new device driver and then scan the devices - * on the IDE bus in case any should be attached to the - * driver we have just registered. If so attach them. - * - * Takes drivers_lock and drives_lock. - */ - -int ide_register_driver(ide_driver_t *driver) -{ - struct list_head list; - struct list_head *list_loop; - struct list_head *tmp_storage; - - spin_lock(&drivers_lock); - list_add(&driver->drivers, &drivers); - spin_unlock(&drivers_lock); - - INIT_LIST_HEAD(&list); - spin_lock(&drives_lock); - list_splice_init(&ide_drives, &list); - spin_unlock(&drives_lock); - - list_for_each_safe(list_loop, tmp_storage, &list) { - ide_drive_t *drive = container_of(list_loop, ide_drive_t, list); - list_del_init(&drive->list); - if (drive->present) - ata_attach(drive); - } - driver->gen_driver.name = (char *) driver->name; - driver->gen_driver.bus = &ide_bus_type; - driver->gen_driver.remove = ide_drive_remove; - return driver_register(&driver->gen_driver); -} - -EXPORT_SYMBOL(ide_register_driver); - -/** - * ide_unregister_driver - unregister IDE device driver - * @driver: the IDE device driver - * - * Called when a driver module is being unloaded. We reattach any - * devices to whatever driver claims them next (typically the default - * driver). - * - * Takes drivers_lock and called functions will take ide_setting_sem. - */ - -void ide_unregister_driver(ide_driver_t *driver) -{ - ide_drive_t *drive; - - spin_lock(&drivers_lock); - list_del(&driver->drivers); - spin_unlock(&drivers_lock); - - driver_unregister(&driver->gen_driver); - - while(!list_empty(&driver->drives)) { - drive = list_entry(driver->drives.next, ide_drive_t, list); - if (driver->cleanup(drive)) { - printk(KERN_ERR "%s: cleanup_module() called while still busy\n", drive->name); - BUG(); - } - ata_attach(drive); - } -} - -EXPORT_SYMBOL(ide_unregister_driver); - /* * Probe module */ EXPORT_SYMBOL(ide_lock); +static int ide_bus_match(struct device *dev, struct device_driver *drv) +{ + return 1; +} + struct bus_type ide_bus_type = { .name = "ide", + .match = ide_bus_match, .suspend = generic_ide_suspend, .resume = generic_ide_resume, }; +EXPORT_SYMBOL_GPL(ide_bus_type); + /* * This is gets invoked once during initialization, to set *everything* up */ diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 47225e32435..4e0f13d1d06 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -72,6 +72,7 @@ static struct amd_ide_chip { { PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, 0x50, AMD_UDMA_133 }, { 0 } }; @@ -487,6 +488,7 @@ static ide_pci_device_t amd74xx_chipsets[] __devinitdata = { /* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2"), /* 13 */ DECLARE_NV_DEV("NFORCE-CK804"), /* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"), + /* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"), }; static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) @@ -521,6 +523,7 @@ static struct pci_device_id amd74xx_pci_tbl[] = { #endif { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl); diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig index 78b201fb5e8..7d58af1ae30 100644 --- a/drivers/ieee1394/Kconfig +++ b/drivers/ieee1394/Kconfig @@ -84,11 +84,6 @@ config IEEE1394_PCILYNX To compile this driver as a module, say M here: the module will be called pcilynx. -# Non-maintained pcilynx options -# if [ "$CONFIG_IEEE1394_PCILYNX" != "n" ]; then -# bool ' Use PCILynx local RAM' CONFIG_IEEE1394_PCILYNX_LOCALRAM -# bool ' Support for non-IEEE1394 local ports' CONFIG_IEEE1394_PCILYNX_PORTS -# fi config IEEE1394_OHCI1394 tristate "OHCI-1394 support" depends on PCI && IEEE1394 diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c index 1c5845f7e4a..a294e45c77c 100644 --- a/drivers/ieee1394/ieee1394_core.c +++ b/drivers/ieee1394/ieee1394_core.c @@ -520,7 +520,7 @@ int hpsb_send_packet(struct hpsb_packet *packet) if (!packet->no_waiter || packet->expect_response) { atomic_inc(&packet->refcnt); - packet->sendtime = jiffies; + packet->sendtime = jiffies + 10 * HZ; skb_queue_tail(&host->pending_packet_queue, packet->skb); } @@ -1248,7 +1248,6 @@ EXPORT_SYMBOL(hpsb_make_phypacket); EXPORT_SYMBOL(hpsb_make_isopacket); EXPORT_SYMBOL(hpsb_read); EXPORT_SYMBOL(hpsb_write); -EXPORT_SYMBOL(hpsb_lock); EXPORT_SYMBOL(hpsb_packet_success); /** highlevel.c **/ diff --git a/drivers/ieee1394/ieee1394_transactions.c b/drivers/ieee1394/ieee1394_transactions.c index 09908b9564d..0aa876360f9 100644 --- a/drivers/ieee1394/ieee1394_transactions.c +++ b/drivers/ieee1394/ieee1394_transactions.c @@ -535,6 +535,7 @@ hpsb_write_fail: return retval; } +#if 0 int hpsb_lock(struct hpsb_host *host, nodeid_t node, unsigned int generation, u64 addr, int extcode, quadlet_t *data, quadlet_t arg) @@ -599,3 +600,5 @@ int hpsb_send_gasp(struct hpsb_host *host, int channel, unsigned int generation, return retval; } + +#endif /* 0 */ diff --git a/drivers/ieee1394/ieee1394_transactions.h b/drivers/ieee1394/ieee1394_transactions.h index 526a43ceb49..45ba784fe6d 100644 --- a/drivers/ieee1394/ieee1394_transactions.h +++ b/drivers/ieee1394/ieee1394_transactions.h @@ -53,12 +53,5 @@ int hpsb_read(struct hpsb_host *host, nodeid_t node, unsigned int generation, u64 addr, quadlet_t *buffer, size_t length); int hpsb_write(struct hpsb_host *host, nodeid_t node, unsigned int generation, u64 addr, quadlet_t *buffer, size_t length); -int hpsb_lock(struct hpsb_host *host, nodeid_t node, unsigned int generation, - u64 addr, int extcode, quadlet_t *data, quadlet_t arg); -int hpsb_lock64(struct hpsb_host *host, nodeid_t node, unsigned int generation, - u64 addr, int extcode, octlet_t *data, octlet_t arg); -int hpsb_send_gasp(struct hpsb_host *host, int channel, unsigned int generation, - quadlet_t *buffer, size_t length, u32 specifier_id, - unsigned int version); #endif /* _IEEE1394_TRANSACTIONS_H */ diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c index a1e30a66297..83e66ed97ab 100644 --- a/drivers/ieee1394/nodemgr.c +++ b/drivers/ieee1394/nodemgr.c @@ -1005,8 +1005,7 @@ static struct unit_directory *nodemgr_process_unit_directory return ud; unit_directory_error: - if (ud != NULL) - kfree(ud); + kfree(ud); return NULL; } diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c index 6cb0b586c29..36e25ac823d 100644 --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -2931,7 +2931,7 @@ static void free_dma_rcv_ctx(struct dma_rcv_ctx *d) kfree(d->prg_cpu); kfree(d->prg_bus); } - if (d->spb) kfree(d->spb); + kfree(d->spb); /* Mark this context as freed. */ d->ohci = NULL; diff --git a/drivers/ieee1394/ohci1394.h b/drivers/ieee1394/ohci1394.h index d1758d40961..cc66c1cae25 100644 --- a/drivers/ieee1394/ohci1394.h +++ b/drivers/ieee1394/ohci1394.h @@ -236,6 +236,9 @@ struct ti_ohci { static inline int cross_bound(unsigned long addr, unsigned int size) { + if (size == 0) + return 0; + if (size > PAGE_SIZE) return 1; diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c index a261d2b0e5a..bdb3a85cafa 100644 --- a/drivers/ieee1394/pcilynx.c +++ b/drivers/ieee1394/pcilynx.c @@ -43,6 +43,7 @@ #include <linux/fs.h> #include <linux/poll.h> #include <linux/kdev_t.h> +#include <linux/dma-mapping.h> #include <asm/byteorder.h> #include <asm/atomic.h> #include <asm/io.h> @@ -834,327 +835,6 @@ static int lynx_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg) * IEEE-1394 functionality section END * ***************************************/ -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS -/* VFS functions for local bus / aux device access. Access to those - * is implemented as a character device instead of block devices - * because buffers are not wanted for this. Therefore llseek (from - * VFS) can be used for these char devices with obvious effects. - */ -static int mem_open(struct inode*, struct file*); -static int mem_release(struct inode*, struct file*); -static unsigned int aux_poll(struct file*, struct poll_table_struct*); -static loff_t mem_llseek(struct file*, loff_t, int); -static ssize_t mem_read (struct file*, char*, size_t, loff_t*); -static ssize_t mem_write(struct file*, const char*, size_t, loff_t*); - - -static struct file_operations aux_ops = { - .owner = THIS_MODULE, - .read = mem_read, - .write = mem_write, - .poll = aux_poll, - .llseek = mem_llseek, - .open = mem_open, - .release = mem_release, -}; - - -static void aux_setup_pcls(struct ti_lynx *lynx) -{ - struct ti_pcl pcl; - - pcl.next = PCL_NEXT_INVALID; - pcl.user_data = pcl_bus(lynx, lynx->dmem_pcl); - put_pcl(lynx, lynx->dmem_pcl, &pcl); -} - -static int mem_open(struct inode *inode, struct file *file) -{ - int cid = iminor(inode); - enum { t_rom, t_aux, t_ram } type; - struct memdata *md; - - if (cid < PCILYNX_MINOR_AUX_START) { - /* just for completeness */ - return -ENXIO; - } else if (cid < PCILYNX_MINOR_ROM_START) { - cid -= PCILYNX_MINOR_AUX_START; - if (cid >= num_of_cards || !cards[cid].aux_port) - return -ENXIO; - type = t_aux; - } else if (cid < PCILYNX_MINOR_RAM_START) { - cid -= PCILYNX_MINOR_ROM_START; - if (cid >= num_of_cards || !cards[cid].local_rom) - return -ENXIO; - type = t_rom; - } else { - /* WARNING: Know what you are doing when opening RAM. - * It is currently used inside the driver! */ - cid -= PCILYNX_MINOR_RAM_START; - if (cid >= num_of_cards || !cards[cid].local_ram) - return -ENXIO; - type = t_ram; - } - - md = (struct memdata *)kmalloc(sizeof(struct memdata), SLAB_KERNEL); - if (md == NULL) - return -ENOMEM; - - md->lynx = &cards[cid]; - md->cid = cid; - - switch (type) { - case t_rom: - md->type = rom; - break; - case t_ram: - md->type = ram; - break; - case t_aux: - atomic_set(&md->aux_intr_last_seen, - atomic_read(&cards[cid].aux_intr_seen)); - md->type = aux; - break; - } - - file->private_data = md; - - return 0; -} - -static int mem_release(struct inode *inode, struct file *file) -{ - kfree(file->private_data); - return 0; -} - -static unsigned int aux_poll(struct file *file, poll_table *pt) -{ - struct memdata *md = (struct memdata *)file->private_data; - int cid = md->cid; - unsigned int mask; - - /* reading and writing is always allowed */ - mask = POLLIN | POLLRDNORM | POLLOUT | POLLWRNORM; - - if (md->type == aux) { - poll_wait(file, &cards[cid].aux_intr_wait, pt); - - if (atomic_read(&md->aux_intr_last_seen) - != atomic_read(&cards[cid].aux_intr_seen)) { - mask |= POLLPRI; - atomic_inc(&md->aux_intr_last_seen); - } - } - - return mask; -} - -loff_t mem_llseek(struct file *file, loff_t offs, int orig) -{ - loff_t newoffs; - - switch (orig) { - case 0: - newoffs = offs; - break; - case 1: - newoffs = offs + file->f_pos; - break; - case 2: - newoffs = PCILYNX_MAX_MEMORY + 1 + offs; - break; - default: - return -EINVAL; - } - - if (newoffs < 0 || newoffs > PCILYNX_MAX_MEMORY + 1) return -EINVAL; - - file->f_pos = newoffs; - return newoffs; -} - -/* - * do not DMA if count is too small because this will have a serious impact - * on performance - the value 2400 was found by experiment and may not work - * everywhere as good as here - use mem_mindma option for modules to change - */ -static short mem_mindma = 2400; -module_param(mem_mindma, short, 0444); -MODULE_PARM_DESC(mem_mindma, "Minimum amount of data required to use DMA"); - -static ssize_t mem_dmaread(struct memdata *md, u32 physbuf, ssize_t count, - int offset) -{ - pcltmp_t pcltmp; - struct ti_pcl *pcl; - size_t retval; - int i; - DECLARE_WAITQUEUE(wait, current); - - count &= ~3; - count = min(count, 53196); - retval = count; - - if (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS)) - & DMA_CHAN_CTRL_BUSY) { - PRINT(KERN_WARNING, md->lynx->id, "DMA ALREADY ACTIVE!"); - } - - reg_write(md->lynx, LBUS_ADDR, md->type | offset); - - pcl = edit_pcl(md->lynx, md->lynx->dmem_pcl, &pcltmp); - pcl->buffer[0].control = PCL_CMD_LBUS_TO_PCI | min(count, 4092); - pcl->buffer[0].pointer = physbuf; - count -= 4092; - - i = 0; - while (count > 0) { - i++; - pcl->buffer[i].control = min(count, 4092); - pcl->buffer[i].pointer = physbuf + i * 4092; - count -= 4092; - } - pcl->buffer[i].control |= PCL_LAST_BUFF; - commit_pcl(md->lynx, md->lynx->dmem_pcl, &pcltmp); - - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&md->lynx->mem_dma_intr_wait, &wait); - run_sub_pcl(md->lynx, md->lynx->dmem_pcl, 2, CHANNEL_LOCALBUS); - - schedule(); - while (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS)) - & DMA_CHAN_CTRL_BUSY) { - if (signal_pending(current)) { - retval = -EINTR; - break; - } - schedule(); - } - - reg_write(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS), 0); - remove_wait_queue(&md->lynx->mem_dma_intr_wait, &wait); - - if (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS)) - & DMA_CHAN_CTRL_BUSY) { - PRINT(KERN_ERR, md->lynx->id, "DMA STILL ACTIVE!"); - } - - return retval; -} - -static ssize_t mem_read(struct file *file, char *buffer, size_t count, - loff_t *offset) -{ - struct memdata *md = (struct memdata *)file->private_data; - ssize_t bcount; - size_t alignfix; - loff_t off = *offset; /* avoid useless 64bit-arithmetic */ - ssize_t retval; - void *membase; - - if ((off + count) > PCILYNX_MAX_MEMORY+1) { - count = PCILYNX_MAX_MEMORY+1 - off; - } - if (count == 0 || off > PCILYNX_MAX_MEMORY) { - return -ENOSPC; - } - - switch (md->type) { - case rom: - membase = md->lynx->local_rom; - break; - case ram: - membase = md->lynx->local_ram; - break; - case aux: - membase = md->lynx->aux_port; - break; - default: - panic("pcilynx%d: unsupported md->type %d in %s", - md->lynx->id, md->type, __FUNCTION__); - } - - down(&md->lynx->mem_dma_mutex); - - if (count < mem_mindma) { - memcpy_fromio(md->lynx->mem_dma_buffer, membase+off, count); - goto out; - } - - bcount = count; - alignfix = 4 - (off % 4); - if (alignfix != 4) { - if (bcount < alignfix) { - alignfix = bcount; - } - memcpy_fromio(md->lynx->mem_dma_buffer, membase+off, - alignfix); - if (bcount == alignfix) { - goto out; - } - bcount -= alignfix; - off += alignfix; - } - - while (bcount >= 4) { - retval = mem_dmaread(md, md->lynx->mem_dma_buffer_dma - + count - bcount, bcount, off); - if (retval < 0) return retval; - - bcount -= retval; - off += retval; - } - - if (bcount) { - memcpy_fromio(md->lynx->mem_dma_buffer + count - bcount, - membase+off, bcount); - } - - out: - retval = copy_to_user(buffer, md->lynx->mem_dma_buffer, count); - up(&md->lynx->mem_dma_mutex); - - if (retval) return -EFAULT; - *offset += count; - return count; -} - - -static ssize_t mem_write(struct file *file, const char *buffer, size_t count, - loff_t *offset) -{ - struct memdata *md = (struct memdata *)file->private_data; - - if (((*offset) + count) > PCILYNX_MAX_MEMORY+1) { - count = PCILYNX_MAX_MEMORY+1 - *offset; - } - if (count == 0 || *offset > PCILYNX_MAX_MEMORY) { - return -ENOSPC; - } - - /* FIXME: dereferencing pointers to PCI mem doesn't work everywhere */ - switch (md->type) { - case aux: - if (copy_from_user(md->lynx->aux_port+(*offset), buffer, count)) - return -EFAULT; - break; - case ram: - if (copy_from_user(md->lynx->local_ram+(*offset), buffer, count)) - return -EFAULT; - break; - case rom: - /* the ROM may be writeable */ - if (copy_from_user(md->lynx->local_rom+(*offset), buffer, count)) - return -EFAULT; - break; - } - - file->f_pos += count; - return count; -} -#endif /* CONFIG_IEEE1394_PCILYNX_PORTS */ - /******************************************************** * Global stuff (interrupt handler, init/shutdown code) * @@ -1181,18 +861,6 @@ static irqreturn_t lynx_irq_handler(int irq, void *dev_id, reg_write(lynx, LINK_INT_STATUS, linkint); reg_write(lynx, PCI_INT_STATUS, intmask); -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - if (intmask & PCI_INT_AUX_INT) { - atomic_inc(&lynx->aux_intr_seen); - wake_up_interruptible(&lynx->aux_intr_wait); - } - - if (intmask & PCI_INT_DMA_HLT(CHANNEL_LOCALBUS)) { - wake_up_interruptible(&lynx->mem_dma_intr_wait); - } -#endif - - if (intmask & PCI_INT_1394) { if (linkint & LINK_INT_PHY_TIMEOUT) { PRINT(KERN_INFO, lynx->id, "PHY timeout occurred"); @@ -1484,15 +1152,9 @@ static void remove_card(struct pci_dev *dev) pci_free_consistent(lynx->dev, PAGE_SIZE, lynx->rcv_page, lynx->rcv_page_dma); case have_aux_buf: -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - pci_free_consistent(lynx->dev, 65536, lynx->mem_dma_buffer, - lynx->mem_dma_buffer_dma); -#endif case have_pcl_mem: -#ifndef CONFIG_IEEE1394_PCILYNX_LOCALRAM pci_free_consistent(lynx->dev, LOCALRAM_SIZE, lynx->pcl_mem, lynx->pcl_mem_dma); -#endif case clear: /* do nothing - already freed */ ; @@ -1524,7 +1186,7 @@ static int __devinit add_card(struct pci_dev *dev, error = -ENXIO; - if (pci_set_dma_mask(dev, 0xffffffff)) + if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) FAIL("DMA address limits not supported for PCILynx hardware"); if (pci_enable_device(dev)) FAIL("failed to enable PCILynx hardware"); @@ -1546,7 +1208,6 @@ static int __devinit add_card(struct pci_dev *dev, spin_lock_init(&lynx->lock); spin_lock_init(&lynx->phy_reg_lock); -#ifndef CONFIG_IEEE1394_PCILYNX_LOCALRAM lynx->pcl_mem = pci_alloc_consistent(dev, LOCALRAM_SIZE, &lynx->pcl_mem_dma); @@ -1558,16 +1219,6 @@ static int __devinit add_card(struct pci_dev *dev, } else { FAIL("failed to allocate PCL memory area"); } -#endif - -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - lynx->mem_dma_buffer = pci_alloc_consistent(dev, 65536, - &lynx->mem_dma_buffer_dma); - if (lynx->mem_dma_buffer == NULL) { - FAIL("failed to allocate DMA buffer for aux"); - } - lynx->state = have_aux_buf; -#endif lynx->rcv_page = pci_alloc_consistent(dev, PAGE_SIZE, &lynx->rcv_page_dma); @@ -1597,13 +1248,6 @@ static int __devinit add_card(struct pci_dev *dev, FAIL("failed to remap registers - card not accessible"); } -#ifdef CONFIG_IEEE1394_PCILYNX_LOCALRAM - if (lynx->local_ram == NULL) { - FAIL("failed to remap local RAM which is required for " - "operation"); - } -#endif - reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET); /* Fix buggy cards with autoboot pin not tied low: */ reg_write(lynx, DMA0_CHAN_CTRL, 0); @@ -1624,13 +1268,6 @@ static int __devinit add_card(struct pci_dev *dev, /* alloc_pcl return values are not checked, it is expected that the * provided PCL space is sufficient for the initial allocations */ -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - if (lynx->aux_port != NULL) { - lynx->dmem_pcl = alloc_pcl(lynx); - aux_setup_pcls(lynx); - sema_init(&lynx->mem_dma_mutex, 1); - } -#endif lynx->rcv_pcl = alloc_pcl(lynx); lynx->rcv_pcl_start = alloc_pcl(lynx); lynx->async.pcl = alloc_pcl(lynx); @@ -1647,12 +1284,6 @@ static int __devinit add_card(struct pci_dev *dev, reg_write(lynx, PCI_INT_ENABLE, PCI_INT_DMA_ALL); -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - reg_set_bits(lynx, PCI_INT_ENABLE, PCI_INT_AUX_INT); - init_waitqueue_head(&lynx->mem_dma_intr_wait); - init_waitqueue_head(&lynx->aux_intr_wait); -#endif - tasklet_init(&lynx->iso_rcv.tq, (void (*)(unsigned long))iso_rcv_bh, (unsigned long)lynx); @@ -1944,37 +1575,18 @@ static int __init pcilynx_init(void) { int ret; -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - if (register_chrdev(PCILYNX_MAJOR, PCILYNX_DRIVER_NAME, &aux_ops)) { - PRINT_G(KERN_ERR, "allocation of char major number %d failed", - PCILYNX_MAJOR); - return -EBUSY; - } -#endif - ret = pci_register_driver(&lynx_pci_driver); if (ret < 0) { PRINT_G(KERN_ERR, "PCI module init failed"); - goto free_char_dev; + return ret; } return 0; - - free_char_dev: -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - unregister_chrdev(PCILYNX_MAJOR, PCILYNX_DRIVER_NAME); -#endif - - return ret; } static void __exit pcilynx_cleanup(void) { pci_unregister_driver(&lynx_pci_driver); - -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - unregister_chrdev(PCILYNX_MAJOR, PCILYNX_DRIVER_NAME); -#endif } diff --git a/drivers/ieee1394/pcilynx.h b/drivers/ieee1394/pcilynx.h index 644ec55d3d4..d631aa8383a 100644 --- a/drivers/ieee1394/pcilynx.h +++ b/drivers/ieee1394/pcilynx.h @@ -55,16 +55,6 @@ struct ti_lynx { void __iomem *aux_port; quadlet_t bus_info_block[5]; -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - atomic_t aux_intr_seen; - wait_queue_head_t aux_intr_wait; - - void *mem_dma_buffer; - dma_addr_t mem_dma_buffer_dma; - struct semaphore mem_dma_mutex; - wait_queue_head_t mem_dma_intr_wait; -#endif - /* * use local RAM of LOCALRAM_SIZE bytes for PCLs, which allows for * LOCALRAM_SIZE * 8 PCLs (each sized 128 bytes); @@ -72,11 +62,9 @@ struct ti_lynx { */ u8 pcl_bmap[LOCALRAM_SIZE / 1024]; -#ifndef CONFIG_IEEE1394_PCILYNX_LOCALRAM /* point to PCLs memory area if needed */ void *pcl_mem; dma_addr_t pcl_mem_dma; -#endif /* PCLs for local mem / aux transfers */ pcl_t dmem_pcl; @@ -378,39 +366,6 @@ struct ti_pcl { #define pcloffs(MEMBER) (offsetof(struct ti_pcl, MEMBER)) -#ifdef CONFIG_IEEE1394_PCILYNX_LOCALRAM - -static inline void put_pcl(const struct ti_lynx *lynx, pcl_t pclid, - const struct ti_pcl *pcl) -{ - int i; - u32 *in = (u32 *)pcl; - u32 *out = (u32 *)(lynx->local_ram + pclid * sizeof(struct ti_pcl)); - - for (i = 0; i < 32; i++, out++, in++) { - writel(*in, out); - } -} - -static inline void get_pcl(const struct ti_lynx *lynx, pcl_t pclid, - struct ti_pcl *pcl) -{ - int i; - u32 *out = (u32 *)pcl; - u32 *in = (u32 *)(lynx->local_ram + pclid * sizeof(struct ti_pcl)); - - for (i = 0; i < 32; i++, out++, in++) { - *out = readl(in); - } -} - -static inline u32 pcl_bus(const struct ti_lynx *lynx, pcl_t pclid) -{ - return pci_resource_start(lynx->dev, 1) + pclid * sizeof(struct ti_pcl); -} - -#else /* CONFIG_IEEE1394_PCILYNX_LOCALRAM */ - static inline void put_pcl(const struct ti_lynx *lynx, pcl_t pclid, const struct ti_pcl *pcl) { @@ -431,10 +386,8 @@ static inline u32 pcl_bus(const struct ti_lynx *lynx, pcl_t pclid) return lynx->pcl_mem_dma + pclid * sizeof(struct ti_pcl); } -#endif /* CONFIG_IEEE1394_PCILYNX_LOCALRAM */ - -#if defined (CONFIG_IEEE1394_PCILYNX_LOCALRAM) || defined (__BIG_ENDIAN) +#if defined (__BIG_ENDIAN) typedef struct ti_pcl pcltmp_t; static inline struct ti_pcl *edit_pcl(const struct ti_lynx *lynx, pcl_t pclid, diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c index 4bedf7113f4..d68c4658f2f 100644 --- a/drivers/ieee1394/video1394.c +++ b/drivers/ieee1394/video1394.c @@ -35,6 +35,11 @@ * */ +/* Markus Tavenrath <speedygoo@speedygoo.de> : + - fixed checks for valid buffer-numbers in video1394_icotl + - changed the ways the dma prg's are used, now it's possible to use + even a single dma buffer +*/ #include <linux/config.h> #include <linux/kernel.h> #include <linux/list.h> @@ -112,6 +117,7 @@ struct dma_iso_ctx { struct it_dma_prg **it_prg; unsigned int *buffer_status; + unsigned int *buffer_prg_assignment; struct timeval *buffer_time; /* time when the buffer was received */ unsigned int *last_used_cmd; /* For ISO Transmit with variable sized packets only ! */ @@ -180,23 +186,14 @@ static int free_dma_iso_ctx(struct dma_iso_ctx *d) kfree(d->prg_reg); } - if (d->ir_prg) - kfree(d->ir_prg); - - if (d->it_prg) - kfree(d->it_prg); - - if (d->buffer_status) - kfree(d->buffer_status); - if (d->buffer_time) - kfree(d->buffer_time); - if (d->last_used_cmd) - kfree(d->last_used_cmd); - if (d->next_buffer) - kfree(d->next_buffer); - + kfree(d->ir_prg); + kfree(d->it_prg); + kfree(d->buffer_status); + kfree(d->buffer_prg_assignment); + kfree(d->buffer_time); + kfree(d->last_used_cmd); + kfree(d->next_buffer); list_del(&d->link); - kfree(d); return 0; @@ -230,7 +227,7 @@ alloc_dma_iso_ctx(struct ti_ohci *ohci, int type, int num_desc, /* Init the regions for easy cleanup */ dma_region_init(&d->dma); - if (dma_region_alloc(&d->dma, d->num_desc * d->buf_size, ohci->dev, + if (dma_region_alloc(&d->dma, (d->num_desc - 1) * d->buf_size, ohci->dev, PCI_DMA_BIDIRECTIONAL)) { PRINT(KERN_ERR, ohci->host->id, "Failed to allocate dma buffer"); free_dma_iso_ctx(d); @@ -342,6 +339,8 @@ alloc_dma_iso_ctx(struct ti_ohci *ohci, int type, int num_desc, d->buffer_status = kmalloc(d->num_desc * sizeof(unsigned int), GFP_KERNEL); + d->buffer_prg_assignment = kmalloc(d->num_desc * sizeof(unsigned int), + GFP_KERNEL); d->buffer_time = kmalloc(d->num_desc * sizeof(struct timeval), GFP_KERNEL); d->last_used_cmd = kmalloc(d->num_desc * sizeof(unsigned int), @@ -354,6 +353,11 @@ alloc_dma_iso_ctx(struct ti_ohci *ohci, int type, int num_desc, free_dma_iso_ctx(d); return NULL; } + if (d->buffer_prg_assignment == NULL) { + PRINT(KERN_ERR, ohci->host->id, "Failed to allocate buffer_prg_assignment"); + free_dma_iso_ctx(d); + return NULL; + } if (d->buffer_time == NULL) { PRINT(KERN_ERR, ohci->host->id, "Failed to allocate buffer_time"); free_dma_iso_ctx(d); @@ -370,6 +374,7 @@ alloc_dma_iso_ctx(struct ti_ohci *ohci, int type, int num_desc, return NULL; } memset(d->buffer_status, 0, d->num_desc * sizeof(unsigned int)); + memset(d->buffer_prg_assignment, 0, d->num_desc * sizeof(unsigned int)); memset(d->buffer_time, 0, d->num_desc * sizeof(struct timeval)); memset(d->last_used_cmd, 0, d->num_desc * sizeof(unsigned int)); memset(d->next_buffer, -1, d->num_desc * sizeof(int)); @@ -379,7 +384,7 @@ alloc_dma_iso_ctx(struct ti_ohci *ohci, int type, int num_desc, PRINT(KERN_INFO, ohci->host->id, "Iso %s DMA: %d buffers " "of size %d allocated for a frame size %d, each with %d prgs", (type == OHCI_ISO_RECEIVE) ? "receive" : "transmit", - d->num_desc, d->buf_size, d->frame_size, d->nb_cmd); + d->num_desc - 1, d->buf_size, d->frame_size, d->nb_cmd); return d; } @@ -394,11 +399,36 @@ static void reset_ir_status(struct dma_iso_ctx *d, int n) d->ir_prg[n][i].status = cpu_to_le32(d->left_size); } +static void reprogram_dma_ir_prg(struct dma_iso_ctx *d, int n, int buffer, int flags) +{ + struct dma_cmd *ir_prg = d->ir_prg[n]; + unsigned long buf = (unsigned long)d->dma.kvirt + buffer * d->buf_size; + int i; + + d->buffer_prg_assignment[n] = buffer; + + ir_prg[0].address = cpu_to_le32(dma_region_offset_to_bus(&d->dma, buf - + (unsigned long)d->dma.kvirt)); + ir_prg[1].address = cpu_to_le32(dma_region_offset_to_bus(&d->dma, + (buf + 4) - (unsigned long)d->dma.kvirt)); + + for (i=2;i<d->nb_cmd-1;i++) { + ir_prg[i].address = cpu_to_le32(dma_region_offset_to_bus(&d->dma, + (buf+(i-1)*PAGE_SIZE) - + (unsigned long)d->dma.kvirt)); + } + + ir_prg[i].control = cpu_to_le32(DMA_CTL_INPUT_MORE | DMA_CTL_UPDATE | + DMA_CTL_IRQ | DMA_CTL_BRANCH | d->left_size); + ir_prg[i].address = cpu_to_le32(dma_region_offset_to_bus(&d->dma, + (buf+(i-1)*PAGE_SIZE) - (unsigned long)d->dma.kvirt)); +} + static void initialize_dma_ir_prg(struct dma_iso_ctx *d, int n, int flags) { struct dma_cmd *ir_prg = d->ir_prg[n]; struct dma_prog_region *ir_reg = &d->prg_reg[n]; - unsigned long buf = (unsigned long)d->dma.kvirt + n * d->buf_size; + unsigned long buf = (unsigned long)d->dma.kvirt; int i; /* the first descriptor will read only 4 bytes */ @@ -508,7 +538,7 @@ static void wakeup_dma_ir_ctx(unsigned long l) for (i = 0; i < d->num_desc; i++) { if (d->ir_prg[i][d->nb_cmd-1].status & cpu_to_le32(0xFFFF0000)) { reset_ir_status(d, i); - d->buffer_status[i] = VIDEO1394_BUFFER_READY; + d->buffer_status[d->buffer_prg_assignment[i]] = VIDEO1394_BUFFER_READY; do_gettimeofday(&d->buffer_time[i]); } } @@ -585,7 +615,7 @@ static void wakeup_dma_it_ctx(unsigned long l) int next = d->next_buffer[i]; put_timestamp(ohci, d, next); d->it_prg[i][d->last_used_cmd[i]].end.status = 0; - d->buffer_status[i] = VIDEO1394_BUFFER_READY; + d->buffer_status[d->buffer_prg_assignment[i]] = VIDEO1394_BUFFER_READY; } } @@ -595,11 +625,25 @@ static void wakeup_dma_it_ctx(unsigned long l) wake_up_interruptible(&d->waitq); } +static void reprogram_dma_it_prg(struct dma_iso_ctx *d, int n, int buffer) +{ + struct it_dma_prg *it_prg = d->it_prg[n]; + unsigned long buf = (unsigned long)d->dma.kvirt + buffer * d->buf_size; + int i; + + d->buffer_prg_assignment[n] = buffer; + for (i=0;i<d->nb_cmd;i++) { + it_prg[i].end.address = + cpu_to_le32(dma_region_offset_to_bus(&d->dma, + (buf+i*d->packet_size) - (unsigned long)d->dma.kvirt)); + } +} + static void initialize_dma_it_prg(struct dma_iso_ctx *d, int n, int sync_tag) { struct it_dma_prg *it_prg = d->it_prg[n]; struct dma_prog_region *it_reg = &d->prg_reg[n]; - unsigned long buf = (unsigned long)d->dma.kvirt + n * d->buf_size; + unsigned long buf = (unsigned long)d->dma.kvirt; int i; d->last_used_cmd[n] = d->nb_cmd - 1; for (i=0;i<d->nb_cmd;i++) { @@ -796,7 +840,7 @@ static int __video1394_ioctl(struct file *file, if (cmd == VIDEO1394_IOC_LISTEN_CHANNEL) { d = alloc_dma_iso_ctx(ohci, OHCI_ISO_RECEIVE, - v.nb_buffers, v.buf_size, + v.nb_buffers + 1, v.buf_size, v.channel, 0); if (d == NULL) { @@ -817,7 +861,7 @@ static int __video1394_ioctl(struct file *file, } else { d = alloc_dma_iso_ctx(ohci, OHCI_ISO_TRANSMIT, - v.nb_buffers, v.buf_size, + v.nb_buffers + 1, v.buf_size, v.channel, v.packet_size); if (d == NULL) { @@ -889,6 +933,7 @@ static int __video1394_ioctl(struct file *file, { struct video1394_wait v; struct dma_iso_ctx *d; + int next_prg; if (copy_from_user(&v, argp, sizeof(v))) return -EFAULT; @@ -896,7 +941,7 @@ static int __video1394_ioctl(struct file *file, d = find_ctx(&ctx->context_list, OHCI_ISO_RECEIVE, v.channel); if (d == NULL) return -EFAULT; - if ((v.buffer<0) || (v.buffer>d->num_desc)) { + if ((v.buffer<0) || (v.buffer>=d->num_desc - 1)) { PRINT(KERN_ERR, ohci->host->id, "Buffer %d out of range",v.buffer); return -EINVAL; @@ -913,12 +958,14 @@ static int __video1394_ioctl(struct file *file, d->buffer_status[v.buffer]=VIDEO1394_BUFFER_QUEUED; + next_prg = (d->last_buffer + 1) % d->num_desc; if (d->last_buffer>=0) d->ir_prg[d->last_buffer][d->nb_cmd-1].branchAddress = - cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[v.buffer], 0) + cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[next_prg], 0) & 0xfffffff0) | 0x1); - d->last_buffer = v.buffer; + d->last_buffer = next_prg; + reprogram_dma_ir_prg(d, d->last_buffer, v.buffer, d->flags); d->ir_prg[d->last_buffer][d->nb_cmd-1].branchAddress = 0; @@ -930,7 +977,7 @@ static int __video1394_ioctl(struct file *file, /* Tell the controller where the first program is */ reg_write(ohci, d->cmdPtr, - dma_prog_region_offset_to_bus(&d->prg_reg[v.buffer], 0) | 0x1); + dma_prog_region_offset_to_bus(&d->prg_reg[d->last_buffer], 0) | 0x1); /* Run IR context */ reg_write(ohci, d->ctrlSet, 0x8000); @@ -951,7 +998,7 @@ static int __video1394_ioctl(struct file *file, { struct video1394_wait v; struct dma_iso_ctx *d; - int i; + int i = 0; if (copy_from_user(&v, argp, sizeof(v))) return -EFAULT; @@ -959,7 +1006,7 @@ static int __video1394_ioctl(struct file *file, d = find_ctx(&ctx->context_list, OHCI_ISO_RECEIVE, v.channel); if (d == NULL) return -EFAULT; - if ((v.buffer<0) || (v.buffer>d->num_desc)) { + if ((v.buffer<0) || (v.buffer>d->num_desc - 1)) { PRINT(KERN_ERR, ohci->host->id, "Buffer %d out of range",v.buffer); return -EINVAL; @@ -1005,9 +1052,9 @@ static int __video1394_ioctl(struct file *file, * Look ahead to see how many more buffers have been received */ i=0; - while (d->buffer_status[(v.buffer+1)%d->num_desc]== + while (d->buffer_status[(v.buffer+1)%(d->num_desc - 1)]== VIDEO1394_BUFFER_READY) { - v.buffer=(v.buffer+1)%d->num_desc; + v.buffer=(v.buffer+1)%(d->num_desc - 1); i++; } spin_unlock_irqrestore(&d->lock, flags); @@ -1023,6 +1070,7 @@ static int __video1394_ioctl(struct file *file, struct video1394_wait v; unsigned int *psizes = NULL; struct dma_iso_ctx *d; + int next_prg; if (copy_from_user(&v, argp, sizeof(v))) return -EFAULT; @@ -1030,7 +1078,7 @@ static int __video1394_ioctl(struct file *file, d = find_ctx(&ctx->context_list, OHCI_ISO_TRANSMIT, v.channel); if (d == NULL) return -EFAULT; - if ((v.buffer<0) || (v.buffer>d->num_desc)) { + if ((v.buffer<0) || (v.buffer>=d->num_desc - 1)) { PRINT(KERN_ERR, ohci->host->id, "Buffer %d out of range",v.buffer); return -EINVAL; @@ -1056,19 +1104,19 @@ static int __video1394_ioctl(struct file *file, spin_lock_irqsave(&d->lock,flags); + // last_buffer is last_prg + next_prg = (d->last_buffer + 1) % d->num_desc; if (d->buffer_status[v.buffer]!=VIDEO1394_BUFFER_FREE) { PRINT(KERN_ERR, ohci->host->id, "Buffer %d is already used",v.buffer); spin_unlock_irqrestore(&d->lock,flags); - if (psizes) - kfree(psizes); + kfree(psizes); return -EBUSY; } if (d->flags & VIDEO1394_VARIABLE_PACKET_SIZE) { initialize_dma_it_prg_var_packet_queue( - d, v.buffer, psizes, - ohci); + d, next_prg, psizes, ohci); } d->buffer_status[v.buffer]=VIDEO1394_BUFFER_QUEUED; @@ -1076,16 +1124,17 @@ static int __video1394_ioctl(struct file *file, if (d->last_buffer >= 0) { d->it_prg[d->last_buffer] [ d->last_used_cmd[d->last_buffer] ].end.branchAddress = - cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[v.buffer], + cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[next_prg], 0) & 0xfffffff0) | 0x3); d->it_prg[d->last_buffer] [ d->last_used_cmd[d->last_buffer] ].begin.branchAddress = - cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[v.buffer], + cpu_to_le32((dma_prog_region_offset_to_bus(&d->prg_reg[next_prg], 0) & 0xfffffff0) | 0x3); - d->next_buffer[d->last_buffer] = v.buffer; + d->next_buffer[d->last_buffer] = (v.buffer + 1) % (d->num_desc - 1); } - d->last_buffer = v.buffer; + d->last_buffer = next_prg; + reprogram_dma_it_prg(d, d->last_buffer, v.buffer); d->next_buffer[d->last_buffer] = -1; d->it_prg[d->last_buffer][d->last_used_cmd[d->last_buffer]].end.branchAddress = 0; @@ -1100,7 +1149,7 @@ static int __video1394_ioctl(struct file *file, /* Tell the controller where the first program is */ reg_write(ohci, d->cmdPtr, - dma_prog_region_offset_to_bus(&d->prg_reg[v.buffer], 0) | 0x3); + dma_prog_region_offset_to_bus(&d->prg_reg[next_prg], 0) | 0x3); /* Run IT context */ reg_write(ohci, d->ctrlSet, 0x8000); @@ -1116,9 +1165,7 @@ static int __video1394_ioctl(struct file *file, } } - if (psizes) - kfree(psizes); - + kfree(psizes); return 0; } @@ -1133,7 +1180,7 @@ static int __video1394_ioctl(struct file *file, d = find_ctx(&ctx->context_list, OHCI_ISO_TRANSMIT, v.channel); if (d == NULL) return -EFAULT; - if ((v.buffer<0) || (v.buffer>d->num_desc)) { + if ((v.buffer<0) || (v.buffer>=d->num_desc-1)) { PRINT(KERN_ERR, ohci->host->id, "Buffer %d out of range",v.buffer); return -EINVAL; diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c index d4233ee61c3..276e1a53010 100644 --- a/drivers/infiniband/core/sa_query.c +++ b/drivers/infiniband/core/sa_query.c @@ -587,7 +587,7 @@ int ib_sa_path_rec_get(struct ib_device *device, u8 port_num, init_mad(query->sa_query.mad, agent); - query->sa_query.callback = ib_sa_path_rec_callback; + query->sa_query.callback = callback ? ib_sa_path_rec_callback : NULL; query->sa_query.release = ib_sa_path_rec_release; query->sa_query.port = port; query->sa_query.mad->mad_hdr.method = IB_MGMT_METHOD_GET; @@ -663,7 +663,7 @@ int ib_sa_mcmember_rec_query(struct ib_device *device, u8 port_num, init_mad(query->sa_query.mad, agent); - query->sa_query.callback = ib_sa_mcmember_rec_callback; + query->sa_query.callback = callback ? ib_sa_mcmember_rec_callback : NULL; query->sa_query.release = ib_sa_mcmember_rec_release; query->sa_query.port = port; query->sa_query.mad->mad_hdr.method = method; @@ -698,20 +698,21 @@ static void send_handler(struct ib_mad_agent *agent, if (!query) return; - switch (mad_send_wc->status) { - case IB_WC_SUCCESS: - /* No callback -- already got recv */ - break; - case IB_WC_RESP_TIMEOUT_ERR: - query->callback(query, -ETIMEDOUT, NULL); - break; - case IB_WC_WR_FLUSH_ERR: - query->callback(query, -EINTR, NULL); - break; - default: - query->callback(query, -EIO, NULL); - break; - } + if (query->callback) + switch (mad_send_wc->status) { + case IB_WC_SUCCESS: + /* No callback -- already got recv */ + break; + case IB_WC_RESP_TIMEOUT_ERR: + query->callback(query, -ETIMEDOUT, NULL); + break; + case IB_WC_WR_FLUSH_ERR: + query->callback(query, -EINTR, NULL); + break; + default: + query->callback(query, -EIO, NULL); + break; + } dma_unmap_single(agent->device->dma_device, pci_unmap_addr(query, mapping), @@ -736,7 +737,7 @@ static void recv_handler(struct ib_mad_agent *mad_agent, query = idr_find(&query_idr, mad_recv_wc->wc->wr_id); spin_unlock_irqrestore(&idr_lock, flags); - if (query) { + if (query && query->callback) { if (mad_recv_wc->wc->status == IB_WC_SUCCESS) query->callback(query, mad_recv_wc->recv_buf.mad->mad_hdr.status ? diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index 56b9c2fa2ec..9d912d6877f 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -499,6 +499,7 @@ static int ib_umad_open(struct inode *inode, struct file *filp) static int ib_umad_close(struct inode *inode, struct file *filp) { struct ib_umad_file *file = filp->private_data; + struct ib_umad_packet *packet, *tmp; int i; for (i = 0; i < IB_UMAD_MAX_AGENTS; ++i) @@ -507,6 +508,9 @@ static int ib_umad_close(struct inode *inode, struct file *filp) ib_unregister_mad_agent(file->agent[i]); } + list_for_each_entry_safe(packet, tmp, &file->recv_list, list) + kfree(packet); + kfree(file); return 0; diff --git a/drivers/infiniband/include/ib_sa.h b/drivers/infiniband/include/ib_sa.h index f4f747707b3..00222285eb9 100644 --- a/drivers/infiniband/include/ib_sa.h +++ b/drivers/infiniband/include/ib_sa.h @@ -147,7 +147,7 @@ struct ib_sa_path_rec { /* reserved */ u8 sl; u8 mtu_selector; - enum ib_mtu mtu; + u8 mtu; u8 rate_selector; u8 rate; u8 packet_life_time_selector; @@ -180,7 +180,7 @@ struct ib_sa_mcmember_rec { u32 qkey; u16 mlid; u8 mtu_selector; - enum ib_mtu mtu; + u8 mtu; u8 traffic_class; u16 pkey; u8 rate_selector; diff --git a/drivers/input/gameport/Kconfig b/drivers/input/gameport/Kconfig index 6282f460aba..1d93f509290 100644 --- a/drivers/input/gameport/Kconfig +++ b/drivers/input/gameport/Kconfig @@ -68,23 +68,3 @@ config GAMEPORT_CS461X depends on PCI endif - -# Yes, SOUND_GAMEPORT looks a bit odd. Yes, it ends up being turned on -# in every .config. Please don't touch it. It is here to handle an -# unusual dependency between GAMEPORT and sound drivers. -# -# Some sound drivers call gameport functions. If GAMEPORT is -# not selected, empty stubs are provided for the functions and all is -# well. -# If GAMEPORT is built in, everything is fine. -# If GAMEPORT is a module, however, it would need to be loaded for the -# sound driver to be able to link properly. Therefore, the sound -# driver must be a module as well in that case. Since there's no way -# to express that directly in Kconfig, we use SOUND_GAMEPORT to -# express it. SOUND_GAMEPORT boils down to "if GAMEPORT is 'm', -# anything that depends on SOUND_GAMEPORT must be 'm' as well. if -# GAMEPORT is 'y' or 'n', it can be anything". -config SOUND_GAMEPORT - tristate - default m if GAMEPORT=m - default y diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 7d7527f8b02..627d343dfba 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -422,7 +422,7 @@ static struct input_handle *joydev_connect(struct input_handler *handler, struct joydev->nkey++; } - for (i = 0; i < BTN_JOYSTICK - BTN_MISC + 1; i++) + for (i = 0; i < BTN_JOYSTICK - BTN_MISC; i++) if (test_bit(i + BTN_MISC, dev->keybit)) { joydev->keymap[i] = joydev->nkey; joydev->keypam[joydev->nkey] = i + BTN_MISC; diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index ff66ed4ee2c..af0446c6de8 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -171,9 +171,9 @@ static struct { unsigned char set2; } atkbd_scroll_keys[] = { { ATKBD_SCR_1, 0xc5 }, - { ATKBD_SCR_2, 0xa9 }, - { ATKBD_SCR_4, 0xb6 }, - { ATKBD_SCR_8, 0xa7 }, + { ATKBD_SCR_2, 0x9d }, + { ATKBD_SCR_4, 0xa4 }, + { ATKBD_SCR_8, 0x9b }, { ATKBD_SCR_CLICK, 0xe0 }, { ATKBD_SCR_LEFT, 0xcb }, { ATKBD_SCR_RIGHT, 0xd2 }, @@ -465,8 +465,10 @@ static int atkbd_event(struct input_dev *dev, unsigned int type, unsigned int co if (atkbd->softrepeat) return 0; i = j = 0; - while (i < 32 && period[i] < dev->rep[REP_PERIOD]) i++; - while (j < 4 && delay[j] < dev->rep[REP_DELAY]) j++; + while (i < 31 && period[i] < dev->rep[REP_PERIOD]) + i++; + while (j < 3 && delay[j] < dev->rep[REP_DELAY]) + j++; dev->rep[REP_PERIOD] = period[i]; dev->rep[REP_DELAY] = delay[j]; param[0] = i | (j << 5); diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index 1f85a9718c8..42a9f7f6f8c 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -341,6 +341,8 @@ static int alps_reconnect(struct psmouse *psmouse) unsigned char param[4]; int version; + psmouse_reset(psmouse); + if (!(priv->i = alps_get_model(psmouse, &version))) return -1; @@ -395,7 +397,7 @@ int alps_init(struct psmouse *psmouse) } if (param[0] & 0x04) { - printk(KERN_INFO " Enabling hardware tapping\n"); + printk(KERN_INFO "alps.c: Enabling hardware tapping\n"); if (alps_tap_mode(psmouse, 1)) printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n"); } diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index cd8509549ea..019034b21a0 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -518,13 +518,16 @@ static int psmouse_probe(struct psmouse *psmouse) /* * First, we check if it's a mouse. It should send 0x00 or 0x03 * in case of an IntelliMouse in 4-byte mode or 0x04 for IM Explorer. + * Sunrex K8561 IR Keyboard/Mouse reports 0xff on second and subsequent + * ID queries, probably due to a firmware bug. */ param[0] = 0xa5; if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETID)) return -1; - if (param[0] != 0x00 && param[0] != 0x03 && param[0] != 0x04) + if (param[0] != 0x00 && param[0] != 0x03 && + param[0] != 0x04 && param[0] != 0xff) return -1; /* @@ -972,7 +975,7 @@ static int psmouse_set_maxproto(const char *val, struct kernel_param *kp) return -EINVAL; if (!strncmp(val, "any", 3)) { - *((unsigned int *)kp->arg) = -1UL; + *((unsigned int *)kp->arg) = -1U; return 0; } diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 69832f8fb72..36c721227b6 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -143,39 +143,6 @@ static int synaptics_identify(struct psmouse *psmouse) return -1; } -static void print_ident(struct synaptics_data *priv) -{ - printk(KERN_INFO "Synaptics Touchpad, model: %ld\n", SYN_ID_MODEL(priv->identity)); - printk(KERN_INFO " Firmware: %ld.%ld\n", SYN_ID_MAJOR(priv->identity), - SYN_ID_MINOR(priv->identity)); - if (SYN_MODEL_ROT180(priv->model_id)) - printk(KERN_INFO " 180 degree mounted touchpad\n"); - if (SYN_MODEL_PORTRAIT(priv->model_id)) - printk(KERN_INFO " portrait touchpad\n"); - printk(KERN_INFO " Sensor: %ld\n", SYN_MODEL_SENSOR(priv->model_id)); - if (SYN_MODEL_NEWABS(priv->model_id)) - printk(KERN_INFO " new absolute packet format\n"); - if (SYN_MODEL_PEN(priv->model_id)) - printk(KERN_INFO " pen detection\n"); - - if (SYN_CAP_EXTENDED(priv->capabilities)) { - printk(KERN_INFO " Touchpad has extended capability bits\n"); - if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap)) - printk(KERN_INFO " -> %d multi-buttons, i.e. besides standard buttons\n", - (int)(SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap))); - if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) - printk(KERN_INFO " -> middle button\n"); - if (SYN_CAP_FOUR_BUTTON(priv->capabilities)) - printk(KERN_INFO " -> four buttons\n"); - if (SYN_CAP_MULTIFINGER(priv->capabilities)) - printk(KERN_INFO " -> multifinger detection\n"); - if (SYN_CAP_PALMDETECT(priv->capabilities)) - printk(KERN_INFO " -> palm detection\n"); - if (SYN_CAP_PASS_THROUGH(priv->capabilities)) - printk(KERN_INFO " -> pass-through port\n"); - } -} - static int synaptics_query_hardware(struct psmouse *psmouse) { int retries = 0; @@ -666,7 +633,11 @@ int synaptics_init(struct psmouse *psmouse) priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS; - print_ident(priv); + printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx\n", + SYN_ID_MODEL(priv->identity), + SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity), + priv->model_id, priv->capabilities, priv->ext_cap); + set_input_params(&psmouse->dev, priv); psmouse->protocol_handler = synaptics_process_byte; diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 564974ce579..96fb9870834 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -101,6 +101,7 @@ struct mousedev_list { unsigned char ready, buffer, bufsiz; unsigned char imexseq, impsseq; enum mousedev_emul mode; + unsigned long last_buttons; }; #define MOUSEDEV_SEQ_LEN 6 @@ -224,7 +225,7 @@ static void mousedev_notify_readers(struct mousedev *mousedev, struct mousedev_h spin_lock_irqsave(&list->packet_lock, flags); p = &list->packets[list->head]; - if (list->ready && p->buttons != packet->buttons) { + if (list->ready && p->buttons != mousedev->packet.buttons) { unsigned int new_head = (list->head + 1) % PACKET_QUEUE_LEN; if (new_head != list->tail) { p = &list->packets[list->head = new_head]; @@ -249,10 +250,13 @@ static void mousedev_notify_readers(struct mousedev *mousedev, struct mousedev_h p->dz += packet->dz; p->buttons = mousedev->packet.buttons; - list->ready = 1; + if (p->dx || p->dy || p->dz || p->buttons != list->last_buttons) + list->ready = 1; spin_unlock_irqrestore(&list->packet_lock, flags); - kill_fasync(&list->fasync, SIGIO, POLL_IN); + + if (list->ready) + kill_fasync(&list->fasync, SIGIO, POLL_IN); } wake_up_interruptible(&mousedev->wait); @@ -477,9 +481,10 @@ static void mousedev_packet(struct mousedev_list *list, signed char *ps2_data) } if (!p->dx && !p->dy && !p->dz) { - if (list->tail == list->head) + if (list->tail == list->head) { list->ready = 0; - else + list->last_buttons = p->buttons; + } else list->tail = (list->tail + 1) % PACKET_QUEUE_LEN; } diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index f64867808fe..0487ecbb8a4 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -88,9 +88,11 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { }; /* - * Some Fujitsu notebooks are ahving trouble with touhcpads if + * Some Fujitsu notebooks are having trouble with touchpads if * active multiplexing mode is activated. Luckily they don't have * external PS/2 ports so we can safely disable it. + * ... apparently some Toshibas don't like MUX mode either and + * die horrible death on reboot. */ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { { @@ -115,12 +117,26 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { }, }, { + .ident = "Fujitsu Lifebook S6230", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S6230"), + }, + }, + { .ident = "Fujitsu T70H", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), DMI_MATCH(DMI_PRODUCT_NAME, "FMVLT70H"), }, }, + { + .ident = "Toshiba P10", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P10"), + }, + }, { } }; @@ -215,11 +231,15 @@ static struct pnp_driver i8042_pnp_aux_driver = { static void i8042_pnp_exit(void) { - if (i8042_pnp_kbd_registered) + if (i8042_pnp_kbd_registered) { + i8042_pnp_kbd_registered = 0; pnp_unregister_driver(&i8042_pnp_kbd_driver); + } - if (i8042_pnp_aux_registered) + if (i8042_pnp_aux_registered) { + i8042_pnp_aux_registered = 0; pnp_unregister_driver(&i8042_pnp_aux_driver); + } } static int i8042_pnp_init(void) @@ -227,7 +247,7 @@ static int i8042_pnp_init(void) int result_kbd, result_aux; if (i8042_nopnp) { - printk("i8042: PNP detection disabled\n"); + printk(KERN_INFO "i8042: PNP detection disabled\n"); return 0; } @@ -241,7 +261,7 @@ static int i8042_pnp_init(void) #if defined(__ia64__) return -ENODEV; #else - printk(KERN_WARNING "PNP: No PS/2 controller found. Probing ports directly.\n"); + printk(KERN_INFO "PNP: No PS/2 controller found. Probing ports directly.\n"); return 0; #endif } @@ -265,7 +285,7 @@ static int i8042_pnp_init(void) i8042_pnp_kbd_irq = i8042_kbd_irq; } - if (result_aux > 0 && !i8042_pnp_aux_irq) { + if (!i8042_pnp_aux_irq) { printk(KERN_WARNING "PNP: PS/2 controller doesn't have AUX irq; using default %#x\n", i8042_aux_irq); i8042_pnp_aux_irq = i8042_aux_irq; } diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 8e63e464d36..5900de3c3f4 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -698,6 +698,26 @@ static void i8042_timer_func(unsigned long data) i8042_interrupt(0, NULL, NULL); } +static int i8042_ctl_test(void) +{ + unsigned char param; + + if (!i8042_reset) + return 0; + + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { + printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n"); + return -1; + } + + if (param != I8042_RET_CTL_TEST) { + printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n", + param, I8042_RET_CTL_TEST); + return -1; + } + + return 0; +} /* * i8042_controller init initializes the i8042 controller, and, @@ -719,21 +739,8 @@ static int i8042_controller_init(void) return -1; } - if (i8042_reset) { - - unsigned char param; - - if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { - printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n"); - return -1; - } - - if (param != I8042_RET_CTL_TEST) { - printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n", - param, I8042_RET_CTL_TEST); - return -1; - } - } + if (i8042_ctl_test()) + return -1; /* * Save the CTR for restoral on unload / reboot. @@ -802,15 +809,11 @@ static int i8042_controller_init(void) */ static void i8042_controller_reset(void) { - unsigned char param; - /* * Reset the controller if requested. */ - if (i8042_reset) - if (i8042_command(¶m, I8042_CMD_CTL_TEST)) - printk(KERN_ERR "i8042.c: i8042 controller reset timeout.\n"); + i8042_ctl_test(); /* * Disable MUX mode if present. @@ -922,8 +925,11 @@ static int i8042_resume(struct device *dev, u32 level) if (level != RESUME_ENABLE) return 0; - if (i8042_controller_init()) { - printk(KERN_ERR "i8042: resume failed\n"); + if (i8042_ctl_test()) + return -1; + + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + printk(KERN_ERR "i8042: Can't write CTR\n"); return -1; } diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c index 3313e2daeab..0beacb77ee1 100644 --- a/drivers/input/serio/serio.c +++ b/drivers/input/serio/serio.c @@ -388,6 +388,24 @@ static ssize_t serio_show_id_extra(struct device *dev, char *buf) return sprintf(buf, "%02x\n", serio->id.extra); } +static DEVICE_ATTR(type, S_IRUGO, serio_show_id_type, NULL); +static DEVICE_ATTR(proto, S_IRUGO, serio_show_id_proto, NULL); +static DEVICE_ATTR(id, S_IRUGO, serio_show_id_id, NULL); +static DEVICE_ATTR(extra, S_IRUGO, serio_show_id_extra, NULL); + +static struct attribute *serio_device_id_attrs[] = { + &dev_attr_type.attr, + &dev_attr_proto.attr, + &dev_attr_id.attr, + &dev_attr_extra.attr, + NULL +}; + +static struct attribute_group serio_id_attr_group = { + .name = "id", + .attrs = serio_device_id_attrs, +}; + static ssize_t serio_rebind_driver(struct device *dev, const char *buf, size_t count) { struct serio *serio = to_serio_port(dev); @@ -444,10 +462,6 @@ static ssize_t serio_set_bind_mode(struct device *dev, const char *buf, size_t c static struct device_attribute serio_device_attrs[] = { __ATTR(description, S_IRUGO, serio_show_description, NULL), - __ATTR(id_type, S_IRUGO, serio_show_id_type, NULL), - __ATTR(id_proto, S_IRUGO, serio_show_id_proto, NULL), - __ATTR(id_id, S_IRUGO, serio_show_id_id, NULL), - __ATTR(id_extra, S_IRUGO, serio_show_id_extra, NULL), __ATTR(drvctl, S_IWUSR, NULL, serio_rebind_driver), __ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode), __ATTR_NULL @@ -498,6 +512,7 @@ static void serio_add_port(struct serio *serio) if (serio->start) serio->start(serio); device_add(&serio->dev); + sysfs_create_group(&serio->dev.kobj, &serio_id_attr_group); serio->registered = 1; } @@ -526,6 +541,7 @@ static void serio_destroy_port(struct serio *serio) } if (serio->registered) { + sysfs_remove_group(&serio->dev.kobj, &serio_id_attr_group); device_del(&serio->dev); list_del_init(&serio->node); serio->registered = 0; @@ -779,7 +795,6 @@ static int serio_resume(struct device *dev) struct serio *serio = to_serio_port(dev); if (!serio->drv || !serio->drv->reconnect || serio->drv->reconnect(serio)) { - serio_disconnect_port(serio); /* * Driver re-probing can take a while, so better let kseriod * deal with it. diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c index 22f73683952..f6b85222ba3 100644 --- a/drivers/input/serio/serport.c +++ b/drivers/input/serio/serport.c @@ -27,11 +27,15 @@ MODULE_LICENSE("GPL"); MODULE_ALIAS_LDISC(N_MOUSE); #define SERPORT_BUSY 1 +#define SERPORT_ACTIVE 2 +#define SERPORT_DEAD 3 struct serport { struct tty_struct *tty; wait_queue_head_t wait; struct serio *serio; + struct serio_device_id id; + spinlock_t lock; unsigned long flags; }; @@ -45,11 +49,29 @@ static int serport_serio_write(struct serio *serio, unsigned char data) return -(serport->tty->driver->write(serport->tty, &data, 1) != 1); } +static int serport_serio_open(struct serio *serio) +{ + struct serport *serport = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&serport->lock, flags); + set_bit(SERPORT_ACTIVE, &serport->flags); + spin_unlock_irqrestore(&serport->lock, flags); + + return 0; +} + + static void serport_serio_close(struct serio *serio) { struct serport *serport = serio->port_data; + unsigned long flags; + + spin_lock_irqsave(&serport->lock, flags); + clear_bit(SERPORT_ACTIVE, &serport->flags); + set_bit(SERPORT_DEAD, &serport->flags); + spin_unlock_irqrestore(&serport->lock, flags); - serport->serio->id.type = 0; wake_up_interruptible(&serport->wait); } @@ -61,36 +83,21 @@ static void serport_serio_close(struct serio *serio) static int serport_ldisc_open(struct tty_struct *tty) { struct serport *serport; - struct serio *serio; - char name[64]; if (!capable(CAP_SYS_ADMIN)) return -EPERM; - serport = kmalloc(sizeof(struct serport), GFP_KERNEL); - serio = kmalloc(sizeof(struct serio), GFP_KERNEL); - if (unlikely(!serport || !serio)) { - kfree(serport); - kfree(serio); + serport = kcalloc(1, sizeof(struct serport), GFP_KERNEL); + if (!serport) return -ENOMEM; - } - memset(serport, 0, sizeof(struct serport)); - serport->serio = serio; - set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); serport->tty = tty; - tty->disc_data = serport; - - memset(serio, 0, sizeof(struct serio)); - strlcpy(serio->name, "Serial port", sizeof(serio->name)); - snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", tty_name(tty, name)); - serio->id.type = SERIO_RS232; - serio->write = serport_serio_write; - serio->close = serport_serio_close; - serio->port_data = serport; - + spin_lock_init(&serport->lock); init_waitqueue_head(&serport->wait); + tty->disc_data = serport; + set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); + return 0; } @@ -100,7 +107,8 @@ static int serport_ldisc_open(struct tty_struct *tty) static void serport_ldisc_close(struct tty_struct *tty) { - struct serport *serport = (struct serport*) tty->disc_data; + struct serport *serport = (struct serport *) tty->disc_data; + kfree(serport); } @@ -116,9 +124,19 @@ static void serport_ldisc_close(struct tty_struct *tty) static void serport_ldisc_receive(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) { struct serport *serport = (struct serport*) tty->disc_data; + unsigned long flags; int i; + + spin_lock_irqsave(&serport->lock, flags); + + if (!test_bit(SERPORT_ACTIVE, &serport->flags)) + goto out; + for (i = 0; i < count; i++) serio_interrupt(serport->serio, cp[i], 0, NULL); + +out: + spin_unlock_irqrestore(&serport->lock, flags); } /* @@ -141,16 +159,33 @@ static int serport_ldisc_room(struct tty_struct *tty) static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, unsigned char __user * buf, size_t nr) { struct serport *serport = (struct serport*) tty->disc_data; + struct serio *serio; char name[64]; if (test_and_set_bit(SERPORT_BUSY, &serport->flags)) return -EBUSY; + serport->serio = serio = kcalloc(1, sizeof(struct serio), GFP_KERNEL); + if (!serio) + return -ENOMEM; + + strlcpy(serio->name, "Serial port", sizeof(serio->name)); + snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", tty_name(tty, name)); + serio->id = serport->id; + serio->id.type = SERIO_RS232; + serio->write = serport_serio_write; + serio->open = serport_serio_open; + serio->close = serport_serio_close; + serio->port_data = serport; + serio_register_port(serport->serio); printk(KERN_INFO "serio: Serial port %s\n", tty_name(tty, name)); - wait_event_interruptible(serport->wait, !serport->serio->id.type); + + wait_event_interruptible(serport->wait, test_bit(SERPORT_DEAD, &serport->flags)); serio_unregister_port(serport->serio); + serport->serio = NULL; + clear_bit(SERPORT_DEAD, &serport->flags); clear_bit(SERPORT_BUSY, &serport->flags); return 0; @@ -163,16 +198,15 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u static int serport_ldisc_ioctl(struct tty_struct * tty, struct file * file, unsigned int cmd, unsigned long arg) { struct serport *serport = (struct serport*) tty->disc_data; - struct serio *serio = serport->serio; unsigned long type; if (cmd == SPIOCSTYPE) { if (get_user(type, (unsigned long __user *) arg)) return -EFAULT; - serio->id.proto = type & 0x000000ff; - serio->id.id = (type & 0x0000ff00) >> 8; - serio->id.extra = (type & 0x00ff0000) >> 16; + serport->id.proto = type & 0x000000ff; + serport->id.id = (type & 0x0000ff00) >> 8; + serport->id.extra = (type & 0x00ff0000) >> 16; return 0; } @@ -182,9 +216,13 @@ static int serport_ldisc_ioctl(struct tty_struct * tty, struct file * file, unsi static void serport_ldisc_write_wakeup(struct tty_struct * tty) { - struct serport *sp = (struct serport *) tty->disc_data; + struct serport *serport = (struct serport *) tty->disc_data; + unsigned long flags; - serio_drv_write_wakeup(sp->serio); + spin_lock_irqsave(&serport->lock, flags); + if (test_bit(SERPORT_ACTIVE, &serport->flags)) + serio_drv_write_wakeup(serport->serio); + spin_unlock_irqrestore(&serport->lock, flags); } /* diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c index c9d0a153671..53a27e43dd2 100644 --- a/drivers/input/touchscreen/gunze.c +++ b/drivers/input/touchscreen/gunze.c @@ -68,8 +68,7 @@ static void gunze_process_packet(struct gunze* gunze, struct pt_regs *regs) if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' || (gunze->data[0] != 'T' && gunze->data[0] != 'R')) { - gunze->data[10] = 0; - printk(KERN_WARNING "gunze.c: bad packet: >%s<\n", gunze->data); + printk(KERN_WARNING "gunze.c: bad packet: >%.*s<\n", GUNZE_MAX_LENGTH, gunze->data); return; } diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index e0ac63effa5..d09308f3096 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -39,15 +39,16 @@ #define MANUAL_MASK 0xe0 #define AUTO_MASK 0x20 -static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, cpu, gpu */ -static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, cpu, gpu */ +static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */ +static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */ static u8 MANUAL_MODE[2] = {0x5c, 0x5d}; static u8 REM_CONTROL[2] = {0x00, 0x40}; static u8 FAN_SPEED[2] = {0x28, 0x2a}; static u8 FAN_SPD_SET[2] = {0x30, 0x31}; -static u8 default_limits_local[3] = {70, 50, 70}; /* local, cpu, gpu */ -static u8 default_limits_chip[3] = {80, 65, 80}; /* local, cpu, gpu */ +static u8 default_limits_local[3] = {70, 50, 70}; /* local, sensor1, sensor2 */ +static u8 default_limits_chip[3] = {80, 65, 80}; /* local, sensor1, sensor2 */ +static char *sensor_location[3] = {NULL, NULL, NULL}; static int limit_adjust = 0; static int fan_speed = -1; @@ -58,7 +59,7 @@ MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and " MODULE_LICENSE("GPL"); module_param(limit_adjust, int, 0644); -MODULE_PARM_DESC(limit_adjust,"Adjust maximum temperatures (50 cpu, 70 gpu) " +MODULE_PARM_DESC(limit_adjust,"Adjust maximum temperatures (50 sensor1, 70 sensor2) " "by N degrees."); module_param(fan_speed, int, 0644); @@ -213,10 +214,10 @@ static void write_fan_speed(struct thermostat *th, int speed, int fan) if (th->last_speed[fan] != speed) { if (speed == -1) printk(KERN_DEBUG "adt746x: Setting speed to automatic " - "for %s fan.\n", fan?"GPU":"CPU"); + "for %s fan.\n", sensor_location[fan+1]); else printk(KERN_DEBUG "adt746x: Setting speed to %d " - "for %s fan.\n", speed, fan?"GPU":"CPU"); + "for %s fan.\n", speed, sensor_location[fan+1]); } else return; @@ -300,11 +301,11 @@ static void update_fans_speed (struct thermostat *th) printk(KERN_DEBUG "adt746x: setting fans speed to %d " "(limit exceeded by %d on %s) \n", new_speed, var, - fan_number?"GPU/pwr":"CPU"); + sensor_location[fan_number+1]); write_both_fan_speed(th, new_speed); th->last_var[fan_number] = var; } else if (var < -2) { - /* don't stop fan if GPU/power is cold and CPU is not + /* don't stop fan if sensor2 is cold and sensor1 is not * so cold (lastvar >= -1) */ if (i == 2 && lastvar < -1) { if (th->last_speed[fan_number] != 0) @@ -318,7 +319,7 @@ static void update_fans_speed (struct thermostat *th) if (started) return; /* we don't want to re-stop the fan - * if CPU is heating and GPU/power is not */ + * if sensor1 is heating and sensor2 is not */ } } @@ -353,7 +354,7 @@ static int monitor_task(void *arg) static void set_limit(struct thermostat *th, int i) { - /* Set CPU limit higher to avoid powerdowns */ + /* Set sensor1 limit higher to avoid powerdowns */ th->limits[i] = default_limits_chip[i] + limit_adjust; write_reg(th, LIMIT_REG[i], th->limits[i]); @@ -461,6 +462,12 @@ static ssize_t show_##name(struct device *dev, char *buf) \ return sprintf(buf, "%d\n", data); \ } +#define BUILD_SHOW_FUNC_STR(name, data) \ +static ssize_t show_##name(struct device *dev, char *buf) \ +{ \ + return sprintf(buf, "%s\n", data); \ +} + #define BUILD_SHOW_FUNC_FAN(name, data) \ static ssize_t show_##name(struct device *dev, char *buf) \ { \ @@ -476,7 +483,7 @@ static ssize_t store_##name(struct device *dev, const char *buf, size_t n) \ int val; \ int i; \ val = simple_strtol(buf, NULL, 10); \ - printk(KERN_INFO "Adjusting limits by %d°C\n", val); \ + printk(KERN_INFO "Adjusting limits by %d degrees\n", val); \ limit_adjust = val; \ for (i=0; i < 3; i++) \ set_limit(thermostat, i); \ @@ -495,35 +502,41 @@ static ssize_t store_##name(struct device *dev, const char *buf, size_t n) \ return n; \ } -BUILD_SHOW_FUNC_INT(cpu_temperature, (read_reg(thermostat, TEMP_REG[1]))) -BUILD_SHOW_FUNC_INT(gpu_temperature, (read_reg(thermostat, TEMP_REG[2]))) -BUILD_SHOW_FUNC_INT(cpu_limit, thermostat->limits[1]) -BUILD_SHOW_FUNC_INT(gpu_limit, thermostat->limits[2]) +BUILD_SHOW_FUNC_INT(sensor1_temperature, (read_reg(thermostat, TEMP_REG[1]))) +BUILD_SHOW_FUNC_INT(sensor2_temperature, (read_reg(thermostat, TEMP_REG[2]))) +BUILD_SHOW_FUNC_INT(sensor1_limit, thermostat->limits[1]) +BUILD_SHOW_FUNC_INT(sensor2_limit, thermostat->limits[2]) +BUILD_SHOW_FUNC_STR(sensor1_location, sensor_location[1]) +BUILD_SHOW_FUNC_STR(sensor2_location, sensor_location[2]) BUILD_SHOW_FUNC_INT(specified_fan_speed, fan_speed) -BUILD_SHOW_FUNC_FAN(cpu_fan_speed, 0) -BUILD_SHOW_FUNC_FAN(gpu_fan_speed, 1) +BUILD_SHOW_FUNC_FAN(sensor1_fan_speed, 0) +BUILD_SHOW_FUNC_FAN(sensor2_fan_speed, 1) BUILD_STORE_FUNC_INT(specified_fan_speed,fan_speed) BUILD_SHOW_FUNC_INT(limit_adjust, limit_adjust) BUILD_STORE_FUNC_DEG(limit_adjust, thermostat) -static DEVICE_ATTR(cpu_temperature, S_IRUGO, - show_cpu_temperature,NULL); -static DEVICE_ATTR(gpu_temperature, S_IRUGO, - show_gpu_temperature,NULL); -static DEVICE_ATTR(cpu_limit, S_IRUGO, - show_cpu_limit, NULL); -static DEVICE_ATTR(gpu_limit, S_IRUGO, - show_gpu_limit, NULL); +static DEVICE_ATTR(sensor1_temperature, S_IRUGO, + show_sensor1_temperature,NULL); +static DEVICE_ATTR(sensor2_temperature, S_IRUGO, + show_sensor2_temperature,NULL); +static DEVICE_ATTR(sensor1_limit, S_IRUGO, + show_sensor1_limit, NULL); +static DEVICE_ATTR(sensor2_limit, S_IRUGO, + show_sensor2_limit, NULL); +static DEVICE_ATTR(sensor1_location, S_IRUGO, + show_sensor1_location, NULL); +static DEVICE_ATTR(sensor2_location, S_IRUGO, + show_sensor2_location, NULL); static DEVICE_ATTR(specified_fan_speed, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH, show_specified_fan_speed,store_specified_fan_speed); -static DEVICE_ATTR(cpu_fan_speed, S_IRUGO, - show_cpu_fan_speed, NULL); -static DEVICE_ATTR(gpu_fan_speed, S_IRUGO, - show_gpu_fan_speed, NULL); +static DEVICE_ATTR(sensor1_fan_speed, S_IRUGO, + show_sensor1_fan_speed, NULL); +static DEVICE_ATTR(sensor2_fan_speed, S_IRUGO, + show_sensor2_fan_speed, NULL); static DEVICE_ATTR(limit_adjust, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH, show_limit_adjust, store_limit_adjust); @@ -534,6 +547,7 @@ thermostat_init(void) { struct device_node* np; u32 *prop; + int i = 0, offset = 0; np = of_find_node_by_name(NULL, "fan"); if (!np) @@ -545,6 +559,12 @@ thermostat_init(void) else return -ENODEV; + prop = (u32 *)get_property(np, "hwsensor-params-version", NULL); + printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop, + (*prop == 1)?"":"un"); + if (*prop != 1) + return -ENODEV; + prop = (u32 *)get_property(np, "reg", NULL); if (!prop) return -ENODEV; @@ -563,6 +583,23 @@ thermostat_init(void) "limit_adjust: %d, fan_speed: %d\n", therm_bus, therm_address, limit_adjust, fan_speed); + if (get_property(np, "hwsensor-location", NULL)) { + for (i = 0; i < 3; i++) { + sensor_location[i] = get_property(np, + "hwsensor-location", NULL) + offset; + + if (sensor_location[i] == NULL) + sensor_location[i] = ""; + + printk(KERN_INFO "sensor %d: %s\n", i, sensor_location[i]); + offset += strlen(sensor_location[i]) + 1; + } + } else { + sensor_location[0] = "?"; + sensor_location[1] = "?"; + sensor_location[2] = "?"; + } + of_dev = of_platform_device_create(np, "temperatures"); if (of_dev == NULL) { @@ -570,15 +607,17 @@ thermostat_init(void) return -ENODEV; } - device_create_file(&of_dev->dev, &dev_attr_cpu_temperature); - device_create_file(&of_dev->dev, &dev_attr_gpu_temperature); - device_create_file(&of_dev->dev, &dev_attr_cpu_limit); - device_create_file(&of_dev->dev, &dev_attr_gpu_limit); + device_create_file(&of_dev->dev, &dev_attr_sensor1_temperature); + device_create_file(&of_dev->dev, &dev_attr_sensor2_temperature); + device_create_file(&of_dev->dev, &dev_attr_sensor1_limit); + device_create_file(&of_dev->dev, &dev_attr_sensor2_limit); + device_create_file(&of_dev->dev, &dev_attr_sensor1_location); + device_create_file(&of_dev->dev, &dev_attr_sensor2_location); device_create_file(&of_dev->dev, &dev_attr_limit_adjust); device_create_file(&of_dev->dev, &dev_attr_specified_fan_speed); - device_create_file(&of_dev->dev, &dev_attr_cpu_fan_speed); + device_create_file(&of_dev->dev, &dev_attr_sensor1_fan_speed); if(therm_type == ADT7460) - device_create_file(&of_dev->dev, &dev_attr_gpu_fan_speed); + device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed); #ifndef CONFIG_I2C_KEYWEST request_module("i2c-keywest"); @@ -591,17 +630,19 @@ static void __exit thermostat_exit(void) { if (of_dev) { - device_remove_file(&of_dev->dev, &dev_attr_cpu_temperature); - device_remove_file(&of_dev->dev, &dev_attr_gpu_temperature); - device_remove_file(&of_dev->dev, &dev_attr_cpu_limit); - device_remove_file(&of_dev->dev, &dev_attr_gpu_limit); + device_remove_file(&of_dev->dev, &dev_attr_sensor1_temperature); + device_remove_file(&of_dev->dev, &dev_attr_sensor2_temperature); + device_remove_file(&of_dev->dev, &dev_attr_sensor1_limit); + device_remove_file(&of_dev->dev, &dev_attr_sensor2_limit); + device_remove_file(&of_dev->dev, &dev_attr_sensor1_location); + device_remove_file(&of_dev->dev, &dev_attr_sensor2_location); device_remove_file(&of_dev->dev, &dev_attr_limit_adjust); device_remove_file(&of_dev->dev, &dev_attr_specified_fan_speed); - device_remove_file(&of_dev->dev, &dev_attr_cpu_fan_speed); + device_remove_file(&of_dev->dev, &dev_attr_sensor1_fan_speed); if(therm_type == ADT7460) device_remove_file(&of_dev->dev, - &dev_attr_gpu_fan_speed); + &dev_attr_sensor2_fan_speed); of_device_unregister(of_dev); } diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index e654aa5eecd..bb9f4044c74 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -2421,7 +2421,7 @@ pmac_wakeup_devices(void) /* Re-enable local CPU interrupts */ local_irq_enable(); - mdelay(100); + mdelay(10); preempt_enable(); /* Re-enable clock spreading on some machines */ @@ -2549,7 +2549,9 @@ powerbook_sleep_Core99(void) return ret; } - printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); + /* Stop environment and ADB interrupts */ + pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0); + pmu_wait_complete(&req); /* Tell PMU what events will wake us up */ pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_CLR_WAKEUP_EVENTS, @@ -2611,8 +2613,6 @@ powerbook_sleep_Core99(void) pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask); pmu_wait_complete(&req); - printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); - pmac_wakeup_devices(); return 0; diff --git a/drivers/md/linear.c b/drivers/md/linear.c index 161e9aa8729..b1941b887f4 100644 --- a/drivers/md/linear.c +++ b/drivers/md/linear.c @@ -269,9 +269,8 @@ static int linear_make_request (request_queue_t *q, struct bio *bio) * split it. */ struct bio_pair *bp; - bp = bio_split(bio, bio_split_pool, - (bio->bi_sector + (bio->bi_size >> 9) - - (tmp_dev->offset + tmp_dev->size))<<1); + bp = bio_split(bio, bio_split_pool, + ((tmp_dev->offset + tmp_dev->size)<<1) - bio->bi_sector); if (linear_make_request(q, &bp->bio1)) generic_make_request(&bp->bio1); if (linear_make_request(q, &bp->bio2)) diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index 4e4bfde3db5..2ae2d709cb1 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -462,10 +462,6 @@ static int multipath_run (mddev_t *mddev) } memset(conf->multipaths, 0, sizeof(struct multipath_info)*mddev->raid_disks); - mddev->queue->unplug_fn = multipath_unplug; - - mddev->queue->issue_flush_fn = multipath_issue_flush; - conf->working_disks = 0; ITERATE_RDEV(mddev,rdev,tmp) { disk_idx = rdev->raid_disk; @@ -528,6 +524,10 @@ static int multipath_run (mddev_t *mddev) * Ok, everything is just fine now */ mddev->array_size = mddev->size; + + mddev->queue->unplug_fn = multipath_unplug; + mddev->queue->issue_flush_fn = multipath_issue_flush; + return 0; out_free_conf: diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 83380b5d659..1db5de52d37 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1197,10 +1197,6 @@ static int run(mddev_t *mddev) if (!conf->r1bio_pool) goto out_no_mem; - mddev->queue->unplug_fn = raid1_unplug; - - mddev->queue->issue_flush_fn = raid1_issue_flush; - ITERATE_RDEV(mddev, rdev, tmp) { disk_idx = rdev->raid_disk; if (disk_idx >= mddev->raid_disks @@ -1282,6 +1278,9 @@ static int run(mddev_t *mddev) */ mddev->array_size = mddev->size; + mddev->queue->unplug_fn = raid1_unplug; + mddev->queue->issue_flush_fn = raid1_issue_flush; + return 0; out_no_mem: diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index e9dc2876a62..3c37be6423d 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1639,9 +1639,6 @@ static int run(mddev_t *mddev) mdname(mddev)); goto out_free_conf; } - mddev->queue->unplug_fn = raid10_unplug; - - mddev->queue->issue_flush_fn = raid10_issue_flush; ITERATE_RDEV(mddev, rdev, tmp) { disk_idx = rdev->raid_disk; @@ -1713,6 +1710,9 @@ static int run(mddev_t *mddev) mddev->array_size = size/2; mddev->resync_max_sectors = size; + mddev->queue->unplug_fn = raid10_unplug; + mddev->queue->issue_flush_fn = raid10_issue_flush; + /* Calculate max read-ahead size. * We need to readahead at least twice a whole stripe.... * maybe... diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index e96e2a10a9c..3cb11ac232f 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1620,9 +1620,6 @@ static int run (mddev_t *mddev) atomic_set(&conf->active_stripes, 0); atomic_set(&conf->preread_active_stripes, 0); - mddev->queue->unplug_fn = raid5_unplug_device; - mddev->queue->issue_flush_fn = raid5_issue_flush; - PRINTK("raid5: run(%s) called.\n", mdname(mddev)); ITERATE_RDEV(mddev,rdev,tmp) { @@ -1728,6 +1725,10 @@ memory = conf->max_nr_stripes * (sizeof(struct stripe_head) + } /* Ok, everything is just fine now */ + + mddev->queue->unplug_fn = raid5_unplug_device; + mddev->queue->issue_flush_fn = raid5_issue_flush; + mddev->array_size = mddev->size * (mddev->raid_disks - 1); return 0; abort: diff --git a/drivers/md/raid6main.c b/drivers/md/raid6main.c index 8a33f351e09..908edd78a79 100644 --- a/drivers/md/raid6main.c +++ b/drivers/md/raid6main.c @@ -1779,9 +1779,6 @@ static int run (mddev_t *mddev) atomic_set(&conf->active_stripes, 0); atomic_set(&conf->preread_active_stripes, 0); - mddev->queue->unplug_fn = raid6_unplug_device; - mddev->queue->issue_flush_fn = raid6_issue_flush; - PRINTK("raid6: run(%s) called.\n", mdname(mddev)); ITERATE_RDEV(mddev,rdev,tmp) { @@ -1895,6 +1892,9 @@ static int run (mddev_t *mddev) /* Ok, everything is just fine now */ mddev->array_size = mddev->size * (mddev->raid_disks - 2); + + mddev->queue->unplug_fn = raid6_unplug_device; + mddev->queue->issue_flush_fn = raid6_issue_flush; return 0; abort: if (conf) { diff --git a/drivers/media/common/saa7146_core.c b/drivers/media/common/saa7146_core.c index 9f6c19ac128..50e8b865401 100644 --- a/drivers/media/common/saa7146_core.c +++ b/drivers/media/common/saa7146_core.c @@ -23,9 +23,9 @@ LIST_HEAD(saa7146_devices); DECLARE_MUTEX(saa7146_devices_lock); -static int saa7146_num = 0; +static int saa7146_num; -unsigned int saa7146_debug = 0; +unsigned int saa7146_debug; module_param(saa7146_debug, int, 0644); MODULE_PARM_DESC(saa7146_debug, "debug level (default: 0)"); diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index 883ec08490f..4983e1b1bb1 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -33,7 +33,7 @@ source "drivers/media/dvb/dibusb/Kconfig" source "drivers/media/dvb/cinergyT2/Kconfig" comment "Supported FlexCopII (B2C2) Adapters" - depends on DVB_CORE && PCI + depends on DVB_CORE && (PCI || USB) source "drivers/media/dvb/b2c2/Kconfig" comment "Supported BT878 Adapters" diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig index 52596907a0b..99bd675df95 100644 --- a/drivers/media/dvb/b2c2/Kconfig +++ b/drivers/media/dvb/b2c2/Kconfig @@ -1,26 +1,50 @@ -config DVB_B2C2_SKYSTAR - tristate "B2C2/Technisat Air/Sky/CableStar 2 PCI" - depends on DVB_CORE && PCI +config DVB_B2C2_FLEXCOP + tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters" + depends on DVB_CORE select DVB_STV0299 select DVB_MT352 select DVB_MT312 select DVB_NXT2002 + select DVB_STV0297 help - Support for the Skystar2 PCI DVB card by Technisat, which - is equipped with the FlexCopII chipset by B2C2, and - for the B2C2/BBTI Air2PC-ATSC card. + Support for the digital TV receiver chip made by B2C2 Inc. included in + Technisats PCI cards and USB boxes. Say Y if you own such a device and want to use it. -config DVB_B2C2_USB - tristate "B2C2/Technisat Air/Sky/Cable2PC USB" - depends on DVB_CORE && USB && EXPERIMENTAL +config DVB_B2C2_FLEXCOP_PCI + tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI" + depends on DVB_B2C2_FLEXCOP && PCI + help + Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2. + + Say Y if you own such a device and want to use it. + +config DVB_B2C2_FLEXCOP_USB + tristate "Technisat/B2C2 Air/Sky/Cable2PC USB" + depends on DVB_B2C2_FLEXCOP && USB + help + Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2, + + Say Y if you own such a device and want to use it. + +config DVB_B2C2_FLEXCOP_DEBUG + bool "Enable debug for the B2C2 FlexCop drivers" + depends on DVB_B2C2_FLEXCOP + help + Say Y if you want to enable the module option to control debug messages + of all B2C2 FlexCop drivers. + +config DVB_B2C2_SKYSTAR + tristate "B2C2/Technisat Air/Sky/CableStar 2 PCI" + depends on DVB_CORE && PCI select DVB_STV0299 select DVB_MT352 + select DVB_MT312 + select DVB_NXT2002 help - Support for the Air/Sky/Cable2PC USB DVB device by B2C2. Currently - the does nothing, but providing basic function for the used usb - protocol. + Support for the Skystar2 PCI DVB card by Technisat, which + is equipped with the FlexCopII chipset by B2C2, and + for the B2C2/BBTI Air2PC-ATSC card. Say Y if you own such a device and want to use it. - diff --git a/drivers/media/dvb/b2c2/Makefile b/drivers/media/dvb/b2c2/Makefile index 9fb1247bfab..7703812af34 100644 --- a/drivers/media/dvb/b2c2/Makefile +++ b/drivers/media/dvb/b2c2/Makefile @@ -1,6 +1,14 @@ -obj-b2c2-usb = b2c2-usb-core.o b2c2-common.o +b2c2-flexcop-objs = flexcop.o flexcop-fe-tuner.o flexcop-i2c.o \ + flexcop-sram.o flexcop-eeprom.o flexcop-misc.o flexcop-hw-filter.o \ + flexcop-dma.o +obj-$(CONFIG_DVB_B2C2_FLEXCOP) += b2c2-flexcop.o + +b2c2-flexcop-pci-objs = flexcop-pci.o +obj-$(CONFIG_DVB_B2C2_FLEXCOP_PCI) += b2c2-flexcop-pci.o + +b2c2-flexcop-usb-objs = flexcop-usb.o +obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o obj-$(CONFIG_DVB_B2C2_SKYSTAR) += skystar2.o -obj-$(CONFIG_DVB_B2C2_USB) + = b2c2-usb.o EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/b2c2/b2c2-common.c b/drivers/media/dvb/b2c2/b2c2-common.c deleted file mode 100644 index 000d60c405e..00000000000 --- a/drivers/media/dvb/b2c2/b2c2-common.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * b2c2-common.c - common methods for the B2C2/Technisat SkyStar2 PCI DVB card and - * for the B2C2/Technisat Sky/Cable/AirStar USB devices - * based on the FlexCopII/FlexCopIII by B2C2, Inc. - * - * Copyright (C) 2003 Vadim Catana, skystar@moldova.cc - * - * FIX: DISEQC Tone Burst in flexcop_diseqc_ioctl() - * FIX: FULL soft DiSEqC for skystar2 (FlexCopII rev 130) VP310 equipped - * Vincenzo Di Massa, hawk.it at tiscalinet.it - * - * Converted to Linux coding style - * Misc reorganization, polishing, restyling - * Roberto Ragusa, r.ragusa at libero.it - * - * Added hardware filtering support, - * Niklas Peinecke, peinecke at gdv.uni-hannover.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ -#include "stv0299.h" -#include "mt352.h" -#include "mt312.h" - -static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) -{ - u8 aclk = 0; - u8 bclk = 0; - - if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } - else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } - else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } - else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } - else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } - else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } - - stv0299_writereg (fe, 0x13, aclk); - stv0299_writereg (fe, 0x14, bclk); - stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); - stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); - stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); - - return 0; -} - -static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) -{ - u8 buf[4]; - u32 div; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; -// struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - div = params->frequency / 125; - - buf[0] = (div >> 8) & 0x7f; - buf[1] = div & 0xff; - buf[2] = 0x84; // 0xC4 - buf[3] = 0x08; - - if (params->frequency < 1500000) buf[3] |= 0x10; - -// if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static u8 samsung_tbmu24112_inittab[] = { - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x7D, - 0x05, 0x35, - 0x06, 0x02, - 0x07, 0x00, - 0x08, 0xC3, - 0x0C, 0x00, - 0x0D, 0x81, - 0x0E, 0x23, - 0x0F, 0x12, - 0x10, 0x7E, - 0x11, 0x84, - 0x12, 0xB9, - 0x13, 0x88, - 0x14, 0x89, - 0x15, 0xC9, - 0x16, 0x00, - 0x17, 0x5C, - 0x18, 0x00, - 0x19, 0x00, - 0x1A, 0x00, - 0x1C, 0x00, - 0x1D, 0x00, - 0x1E, 0x00, - 0x1F, 0x3A, - 0x20, 0x2E, - 0x21, 0x80, - 0x22, 0xFF, - 0x23, 0xC1, - 0x28, 0x00, - 0x29, 0x1E, - 0x2A, 0x14, - 0x2B, 0x0F, - 0x2C, 0x09, - 0x2D, 0x05, - 0x31, 0x1F, - 0x32, 0x19, - 0x33, 0xFE, - 0x34, 0x93, - 0xff, 0xff, -}; - -static struct stv0299_config samsung_tbmu24112_config = { - .demod_address = 0x68, - .inittab = samsung_tbmu24112_inittab, - .mclk = 88000000UL, - .invert = 0, - .enhanced_tuning = 0, - .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_LK, - .volt13_op0_op1 = STV0299_VOLT13_OP1, - .min_delay_ms = 100, - .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, - .pll_set = samsung_tbmu24112_pll_set, -}; - - - - - -static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe) -{ - static u8 mt352_clock_config [] = { 0x89, 0x10, 0x2d }; - static u8 mt352_reset [] = { 0x50, 0x80 }; - static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; - static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 }; - static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; - - mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); - udelay(2000); - mt352_write(fe, mt352_reset, sizeof(mt352_reset)); - mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); - - mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); - mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); - - return 0; -} - -static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf) -{ - u32 div; - unsigned char bs = 0; - - #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ - div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; - - if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09; - if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a; - if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08; - - pllbuf[0] = 0xc2; // Note: non-linux standard PLL i2c address - pllbuf[1] = div >> 8; - pllbuf[2] = div & 0xff; - pllbuf[3] = 0xcc; - pllbuf[4] = bs; - - return 0; -} - -static struct mt352_config samsung_tdtc9251dh0_config = { - - .demod_address = 0x0f, - .demod_init = samsung_tdtc9251dh0_demod_init, - .pll_set = samsung_tdtc9251dh0_pll_set, -}; - -static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) -{ - u8 buf[4]; - u32 div; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; -// struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - div = (params->frequency + (125/2)) / 125; - - buf[0] = (div >> 8) & 0x7f; - buf[1] = (div >> 0) & 0xff; - buf[2] = 0x84 | ((div >> 10) & 0x60); - buf[3] = 0x80; - - if (params->frequency < 1550000) - buf[3] |= 0x02; - - //if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static struct mt312_config skystar23_samsung_tbdu18132_config = { - - .demod_address = 0x0e, - .pll_set = skystar23_samsung_tbdu18132_pll_set, -}; diff --git a/drivers/media/dvb/b2c2/b2c2-usb-core.c b/drivers/media/dvb/b2c2/b2c2-usb-core.c deleted file mode 100644 index 9306da046c9..00000000000 --- a/drivers/media/dvb/b2c2/b2c2-usb-core.c +++ /dev/null @@ -1,549 +0,0 @@ -/* - * Copyright (C) 2004 Patrick Boettcher <patrick.boettcher@desy.de>, - * Luca Bertagnolio <>, - * - * based on information provided by John Jurrius from BBTI, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation, version 2. - * - */ - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/usb.h> -#include <linux/moduleparam.h> -#include <linux/pci.h> -#include <linux/version.h> - -#include "dmxdev.h" -#include "dvb_demux.h" -#include "dvb_filter.h" -#include "dvb_net.h" -#include "dvb_frontend.h" - -/* debug */ -#define dprintk(level,args...) \ - do { if ((debug & level)) { printk(args); } } while (0) -#define debug_dump(b,l) if (debug) {\ - int i; deb_xfer("%s: %d > ",__FUNCTION__,l); \ - for (i = 0; i < l; i++) deb_xfer("%02x ", b[i]); \ - deb_xfer("\n");\ -} - -static int debug; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,ctrl=4 (or-able))."); - -#define deb_info(args...) dprintk(0x01,args) -#define deb_ts(args...) dprintk(0x02,args) -#define deb_ctrl(args...) dprintk(0x04,args) - -/* Version information */ -#define DRIVER_VERSION "0.0" -#define DRIVER_DESC "Driver for B2C2/Technisat Air/Cable/Sky-2-PC USB devices" -#define DRIVER_AUTHOR "Patrick Boettcher, patrick.boettcher@desy.de" - -/* transfer parameters */ -#define B2C2_USB_FRAMES_PER_ISO 4 -#define B2C2_USB_NUM_ISO_URB 4 /* TODO check out a good value */ - -#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(b2c2->udev,0) -#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(b2c2->udev,0) -#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(b2c2->udev,0x81) - -struct usb_b2c2_usb { - struct usb_device *udev; - struct usb_interface *uintf; - - u8 *iso_buffer; - int buffer_size; - dma_addr_t iso_dma_handle; - struct urb *iso_urb[B2C2_USB_NUM_ISO_URB]; -}; - - -/* - * USB - * 10 90 34 12 78 56 04 00 - * usb_control_msg(udev, usb_sndctrlpipe(udev,0), - * 0x90, - * 0x10, - * 0x1234, - * 0x5678, - * buf, - * 4, - * 5*HZ); - * - * extern int usb_control_msg(struct usb_device *dev, unsigned int pipe, - * __u8 request, - * __u8 requesttype, - * __u16 value, - * __u16 index, - * void *data, - * __u16 size, - * int timeout); - * - */ - -/* request types */ -typedef enum { - -/* something is wrong with this part - RTYPE_READ_DW = (1 << 6), - RTYPE_WRITE_DW_1 = (3 << 6), - RTYPE_READ_V8_MEMORY = (6 << 6), - RTYPE_WRITE_V8_MEMORY = (7 << 6), - RTYPE_WRITE_V8_FLASH = (8 << 6), - RTYPE_GENERIC = (9 << 6), -*/ - RTYPE_READ_DW = (3 << 6), - RTYPE_WRITE_DW_1 = (1 << 6), - - RTYPE_READ_V8_MEMORY = (6 << 6), - RTYPE_WRITE_V8_MEMORY = (7 << 6), - RTYPE_WRITE_V8_FLASH = (8 << 6), - RTYPE_GENERIC = (9 << 6), -} b2c2_usb_request_type_t; - -/* request */ -typedef enum { - B2C2_USB_WRITE_V8_MEM = 0x04, - B2C2_USB_READ_V8_MEM = 0x05, - B2C2_USB_READ_REG = 0x08, - B2C2_USB_WRITE_REG = 0x0A, -/* B2C2_USB_WRITEREGLO = 0x0A, */ - B2C2_USB_WRITEREGHI = 0x0B, - B2C2_USB_FLASH_BLOCK = 0x10, - B2C2_USB_I2C_REQUEST = 0x11, - B2C2_USB_UTILITY = 0x12, -} b2c2_usb_request_t; - -/* function definition for I2C_REQUEST */ -typedef enum { - USB_FUNC_I2C_WRITE = 0x01, - USB_FUNC_I2C_MULTIWRITE = 0x02, - USB_FUNC_I2C_READ = 0x03, - USB_FUNC_I2C_REPEATWRITE = 0x04, - USB_FUNC_GET_DESCRIPTOR = 0x05, - USB_FUNC_I2C_REPEATREAD = 0x06, -/* DKT 020208 - add this to support special case of DiSEqC */ - USB_FUNC_I2C_CHECKWRITE = 0x07, - USB_FUNC_I2C_CHECKRESULT = 0x08, -} b2c2_usb_i2c_function_t; - -/* - * function definition for UTILITY request 0x12 - * DKT 020304 - new utility function - */ -typedef enum { - UTILITY_SET_FILTER = 0x01, - UTILITY_DATA_ENABLE = 0x02, - UTILITY_FLEX_MULTIWRITE = 0x03, - UTILITY_SET_BUFFER_SIZE = 0x04, - UTILITY_FLEX_OPERATOR = 0x05, - UTILITY_FLEX_RESET300_START = 0x06, - UTILITY_FLEX_RESET300_STOP = 0x07, - UTILITY_FLEX_RESET300 = 0x08, - UTILITY_SET_ISO_SIZE = 0x09, - UTILITY_DATA_RESET = 0x0A, - UTILITY_GET_DATA_STATUS = 0x10, - UTILITY_GET_V8_REG = 0x11, -/* DKT 020326 - add function for v1.14 */ - UTILITY_SRAM_WRITE = 0x12, - UTILITY_SRAM_READ = 0x13, - UTILITY_SRAM_TESTFILL = 0x14, - UTILITY_SRAM_TESTSET = 0x15, - UTILITY_SRAM_TESTVERIFY = 0x16, -} b2c2_usb_utility_function_t; - -#define B2C2_WAIT_FOR_OPERATION_RW 1 // 1 s -#define B2C2_WAIT_FOR_OPERATION_RDW 3 // 3 s -#define B2C2_WAIT_FOR_OPERATION_WDW 1 // 1 s - -#define B2C2_WAIT_FOR_OPERATION_V8READ 3 // 3 s -#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3 // 3 s -#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3 // 3 s - -/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits - * in the IBI address, to make the V8 code simpler. - * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (these are the six bits used) - * in general: 0000 0HHH 000L LL00 - * IBI ADDRESS FORMAT: RHHH BLLL - * - * where R is the read(1)/write(0) bit, B is the busy bit - * and HHH and LLL are the two sets of three bits from the PCI address. - */ -#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70)) -#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4)) - -/* - * DKT 020228 - forget about this VENDOR_BUFFER_SIZE, read and write register - * deal with DWORD or 4 bytes, that should be should from now on - */ -static u32 b2c2_usb_read_dw(struct usb_b2c2_usb *b2c2, u16 wRegOffsPCI) -{ - u32 val; - u16 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) | 0x0080; - int len = usb_control_msg(b2c2->udev, - B2C2_USB_CTRL_PIPE_IN, - B2C2_USB_READ_REG, - RTYPE_READ_DW, - wAddress, - 0, - &val, - sizeof(u32), - B2C2_WAIT_FOR_OPERATION_RDW * 1000); - - if (len != sizeof(u32)) { - err("error while reading dword from %d (%d).",wAddress,wRegOffsPCI); - return -EIO; - } else - return val; -} - -/* - * DKT 020228 - from now on, we don't support anything older than firm 1.00 - * I eliminated the write register as a 2 trip of writing hi word and lo word - * and force this to write only 4 bytes at a time. - * NOTE: this should work with all the firmware from 1.00 and newer - */ -static int b2c2_usb_write_dw(struct usb_b2c2_usb *b2c2, u16 wRegOffsPCI, u32 val) -{ - u16 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI); - int len = usb_control_msg(b2c2->udev, - B2C2_USB_CTRL_PIPE_OUT, - B2C2_USB_WRITE_REG, - RTYPE_WRITE_DW_1, - wAddress, - 0, - &val, - sizeof(u32), - B2C2_WAIT_FOR_OPERATION_RDW * 1000); - - if (len != sizeof(u32)) { - err("error while reading dword from %d (%d).",wAddress,wRegOffsPCI); - return -EIO; - } else - return 0; -} - -/* - * DKT 010817 - add support for V8 memory read/write and flash update - */ -static int b2c2_usb_v8_memory_req(struct usb_b2c2_usb *b2c2, - b2c2_usb_request_t req, u8 page, u16 wAddress, - u16 buflen, u8 *pbBuffer) -{ - u8 dwRequestType; - u16 wIndex; - int nWaitTime,pipe,len; - - wIndex = page << 8; - - switch (req) { - case B2C2_USB_READ_V8_MEM: - nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ; - dwRequestType = (u8) RTYPE_READ_V8_MEMORY; - pipe = B2C2_USB_CTRL_PIPE_IN; - break; - case B2C2_USB_WRITE_V8_MEM: - wIndex |= pbBuffer[0]; - nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE; - dwRequestType = (u8) RTYPE_WRITE_V8_MEMORY; - pipe = B2C2_USB_CTRL_PIPE_OUT; - break; - case B2C2_USB_FLASH_BLOCK: - nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH; - dwRequestType = (u8) RTYPE_WRITE_V8_FLASH; - pipe = B2C2_USB_CTRL_PIPE_OUT; - break; - default: - deb_info("unsupported request for v8_mem_req %x.\n",req); - return -EINVAL; - } - len = usb_control_msg(b2c2->udev,pipe, - req, - dwRequestType, - wAddress, - wIndex, - pbBuffer, - buflen, - nWaitTime * 1000); - return len == buflen ? 0 : -EIO; -} - -static int b2c2_usb_i2c_req(struct usb_b2c2_usb *b2c2, - b2c2_usb_request_t req, b2c2_usb_i2c_function_t func, - u8 port, u8 chipaddr, u8 addr, u8 buflen, u8 *buf) -{ - u16 wValue, wIndex; - int nWaitTime,pipe,len; - u8 dwRequestType; - - switch (func) { - case USB_FUNC_I2C_WRITE: - case USB_FUNC_I2C_MULTIWRITE: - case USB_FUNC_I2C_REPEATWRITE: - /* DKT 020208 - add this to support special case of DiSEqC */ - case USB_FUNC_I2C_CHECKWRITE: - pipe = B2C2_USB_CTRL_PIPE_OUT; - nWaitTime = 2; - dwRequestType = (u8) RTYPE_GENERIC; - break; - case USB_FUNC_I2C_READ: - case USB_FUNC_I2C_REPEATREAD: - pipe = B2C2_USB_CTRL_PIPE_IN; - nWaitTime = 2; - dwRequestType = (u8) RTYPE_GENERIC; - break; - default: - deb_info("unsupported function for i2c_req %x\n",func); - return -EINVAL; - } - wValue = (func << 8 ) | port; - wIndex = (chipaddr << 8 ) | addr; - - len = usb_control_msg(b2c2->udev,pipe, - req, - dwRequestType, - addr, - wIndex, - buf, - buflen, - nWaitTime * 1000); - return len == buflen ? 0 : -EIO; -} - -int static b2c2_usb_utility_req(struct usb_b2c2_usb *b2c2, int set, - b2c2_usb_utility_function_t func, u8 extra, u16 wIndex, - u16 buflen, u8 *pvBuffer) -{ - u16 wValue; - int nWaitTime = 2, - pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN, - len; - - wValue = (func << 8) | extra; - - len = usb_control_msg(b2c2->udev,pipe, - B2C2_USB_UTILITY, - (u8) RTYPE_GENERIC, - wValue, - wIndex, - pvBuffer, - buflen, - nWaitTime * 1000); - return len == buflen ? 0 : -EIO; -} - - - -static void b2c2_dumpfourreg(struct usb_b2c2_usb *b2c2, u16 offs) -{ - u32 r0,r1,r2,r3; - r0 = r1 = r2 = r3 = 0; - r0 = b2c2_usb_read_dw(b2c2,offs); - r1 = b2c2_usb_read_dw(b2c2,offs + 0x04); - r2 = b2c2_usb_read_dw(b2c2,offs + 0x08); - r3 = b2c2_usb_read_dw(b2c2,offs + 0x0c); - deb_ctrl("dump: offset: %03x, %08x, %08x, %08x, %08x\n",offs,r0,r1,r2,r3); -} - -static void b2c2_urb_complete(struct urb *urb, struct pt_regs *ptregs) -{ - struct usb_b2c2_usb *b2c2 = urb->context; - deb_ts("urb completed, bufsize: %d\n",urb->transfer_buffer_length); - -// urb_submit_urb(urb,GFP_ATOMIC); enable for real action -} - -static void b2c2_exit_usb(struct usb_b2c2_usb *b2c2) -{ - int i; - for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) - if (b2c2->iso_urb[i] != NULL) { /* not sure about unlink_urb and iso-urbs TODO */ - deb_info("unlinking/killing urb no. %d\n",i); -#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,7) - usb_unlink_urb(b2c2->iso_urb[i]); -#else - usb_kill_urb(b2c2->iso_urb[i]); -#endif - usb_free_urb(b2c2->iso_urb[i]); - } - - if (b2c2->iso_buffer != NULL) - pci_free_consistent(NULL,b2c2->buffer_size, b2c2->iso_buffer, b2c2->iso_dma_handle); - -} - -static int b2c2_init_usb(struct usb_b2c2_usb *b2c2) -{ - u16 frame_size = le16_to_cpu(b2c2->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize); - int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret; - int buffer_offset = 0; - - deb_info("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n", - B2C2_USB_NUM_ISO_URB, B2C2_USB_FRAMES_PER_ISO, frame_size,bufsize); - - b2c2->iso_buffer = pci_alloc_consistent(NULL,bufsize,&b2c2->iso_dma_handle); - if (b2c2->iso_buffer == NULL) - return -ENOMEM; - memset(b2c2->iso_buffer, 0, bufsize); - b2c2->buffer_size = bufsize; - - /* creating iso urbs */ - for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) - if (!(b2c2->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,GFP_ATOMIC))) { - ret = -ENOMEM; - goto urb_error; - } - /* initialising and submitting iso urbs */ - for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) { - int frame_offset = 0; - struct urb *urb = b2c2->iso_urb[i]; - deb_info("initializing and submitting urb no. %d (buf_offset: %d).\n",i,buffer_offset); - - urb->dev = b2c2->udev; - urb->context = b2c2; - urb->complete = b2c2_urb_complete; - urb->pipe = B2C2_USB_DATA_PIPE; - urb->transfer_flags = URB_ISO_ASAP; - urb->interval = 1; - urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO; - urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO; - urb->transfer_buffer = b2c2->iso_buffer + buffer_offset; - - buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO; - for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) { - deb_info("urb no: %d, frame: %d, frame_offset: %d\n",i,j,frame_offset); - urb->iso_frame_desc[j].offset = frame_offset; - urb->iso_frame_desc[j].length = frame_size; - frame_offset += frame_size; - } - - if ((ret = usb_submit_urb(b2c2->iso_urb[i],GFP_ATOMIC))) { - err("submitting urb %d failed with %d.",i,ret); - goto urb_error; - } - deb_info("submitted urb no. %d.\n",i); - } - - ret = 0; - goto success; -urb_error: - b2c2_exit_usb(b2c2); -success: - return ret; -} - -static int b2c2_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(intf); - struct usb_b2c2_usb *b2c2 = NULL; - int ret; - - b2c2 = kmalloc(sizeof(struct usb_b2c2_usb),GFP_KERNEL); - if (b2c2 == NULL) { - err("no memory"); - return -ENOMEM; - } - b2c2->udev = udev; - b2c2->uintf = intf; - - /* use the alternate setting with the larges buffer */ - usb_set_interface(udev,0,1); - - if ((ret = b2c2_init_usb(b2c2))) - goto usb_init_error; - - usb_set_intfdata(intf,b2c2); - - switch (udev->speed) { - case USB_SPEED_LOW: - err("cannot handle USB speed because it is to sLOW."); - break; - case USB_SPEED_FULL: - info("running at FULL speed."); - break; - case USB_SPEED_HIGH: - info("running at HIGH speed."); - break; - case USB_SPEED_UNKNOWN: /* fall through */ - default: - err("cannot handle USB speed because it is unkown."); - break; - } - - b2c2_dumpfourreg(b2c2,0x200); - b2c2_dumpfourreg(b2c2,0x300); - b2c2_dumpfourreg(b2c2,0x400); - b2c2_dumpfourreg(b2c2,0x700); - - - if (ret == 0) - info("%s successfully initialized and connected.",DRIVER_DESC); - else - info("%s error while loading driver (%d)",DRIVER_DESC,ret); - - ret = 0; - goto success; - -usb_init_error: - kfree(b2c2); -success: - return ret; -} - -static void b2c2_usb_disconnect(struct usb_interface *intf) -{ - struct usb_b2c2_usb *b2c2 = usb_get_intfdata(intf); - usb_set_intfdata(intf,NULL); - if (b2c2 != NULL) { - b2c2_exit_usb(b2c2); - kfree(b2c2); - } - info("%s successfully deinitialized and disconnected.",DRIVER_DESC); - -} - -static struct usb_device_id b2c2_usb_table [] = { - { USB_DEVICE(0x0af7, 0x0101) } -}; - -/* usb specific object needed to register this driver with the usb subsystem */ -static struct usb_driver b2c2_usb_driver = { - .owner = THIS_MODULE, - .name = "dvb_b2c2_usb", - .probe = b2c2_usb_probe, - .disconnect = b2c2_usb_disconnect, - .id_table = b2c2_usb_table, -}; - -/* module stuff */ -static int __init b2c2_usb_init(void) -{ - int result; - if ((result = usb_register(&b2c2_usb_driver))) { - err("usb_register failed. Error number %d",result); - return result; - } - - return 0; -} - -static void __exit b2c2_usb_exit(void) -{ - /* deregister this driver from the USB subsystem */ - usb_deregister(&b2c2_usb_driver); -} - -module_init (b2c2_usb_init); -module_exit (b2c2_usb_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(usb, b2c2_usb_table); diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h new file mode 100644 index 00000000000..773d158032d --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-common.h @@ -0,0 +1,164 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-common.h - common header file for device-specific source files also. + * + * see flexcop.c for copyright information. + */ +#ifndef __FLEXCOP_COMMON_H__ +#define __FLEXCOP_COMMON_H__ + +#include <linux/config.h> +#include <linux/pci.h> + +#include "flexcop-reg.h" + +#include "dmxdev.h" +#include "dvb_demux.h" +#include "dvb_filter.h" +#include "dvb_net.h" +#include "dvb_frontend.h" + +#define FC_MAX_FEED 256 + +#ifndef FC_LOG_PREFIX +#warning please define a log prefix for your file, using a default one +#define FC_LOG_PREFIX "b2c2-undef" +#endif + +/* Steal from usb.h */ +#undef err +#define err(format, arg...) printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg) +#undef info +#define info(format, arg...) printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg) +#undef warn +#define warn(format, arg...) printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg) + +struct flexcop_dma { + struct pci_dev *pdev; + + u8 *cpu_addr0; + dma_addr_t dma_addr0; + u8 *cpu_addr1; + dma_addr_t dma_addr1; + u32 size; /* size of each address in bytes */ +}; + +/* Control structure for data definitions that are common to + * the B2C2-based PCI and USB devices. + */ +struct flexcop_device { + /* general */ + struct device *dev; /* for firmware_class */ + +#define FC_STATE_DVB_INIT 0x01 +#define FC_STATE_I2C_INIT 0x02 +#define FC_STATE_FE_INIT 0x04 + int init_state; + + /* device information */ + int has_32_hw_pid_filter; + flexcop_revision_t rev; + flexcop_device_type_t dev_type; + flexcop_bus_t bus_type; + + /* dvb stuff */ + struct dvb_adapter dvb_adapter; + struct dvb_frontend *fe; + struct dvb_net dvbnet; + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + int (*fe_sleep) (struct dvb_frontend *); + + struct i2c_adapter i2c_adap; + struct semaphore i2c_sem; + + struct module *owner; + + /* options and status */ + int extra_feedcount; + int feedcount; + int pid_filtering; + int fullts_streaming_state; + + /* bus specific callbacks */ + flexcop_ibi_value (*read_ibi_reg) (struct flexcop_device *, flexcop_ibi_register); + int (*write_ibi_reg) (struct flexcop_device *, flexcop_ibi_register, flexcop_ibi_value); + + + int (*i2c_request) (struct flexcop_device*, flexcop_access_op_t, flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len); + int (*stream_control) (struct flexcop_device*, int); + + int (*get_mac_addr) (struct flexcop_device *fc, int extended); + + void *bus_specific; +}; + +/* exported prototypes */ + +/* from flexcop.c */ +void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len); +void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no); + +struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len); +void flexcop_device_kfree(struct flexcop_device*); + +int flexcop_device_initialize(struct flexcop_device*); +void flexcop_device_exit(struct flexcop_device *fc); + +/* from flexcop-dma.c */ +int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size); +void flexcop_dma_free(struct flexcop_dma *dma); + +int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff); +int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff); +int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff); +int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index); +int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles); +int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets); + +/* from flexcop-eeprom.c */ +/* the PCI part uses this call to get the MAC address, the USB part has its own */ +int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended); + +/* from flexcop-i2c.c */ +/* the PCI part uses this a i2c_request callback, whereas the usb part has its own + * one. We have it in flexcop-i2c.c, because it is going via the actual + * I2C-channel of the flexcop. + */ +int flexcop_i2c_request(struct flexcop_device*, flexcop_access_op_t, + flexcop_i2c_port_t, u8 chipaddr, u8 addr, u8 *buf, u16 len); + +/* from flexcop-sram.c */ +int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target); +void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s); +void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill); + +/* global prototypes for the flexcop-chip */ +/* from flexcop-fe-tuner.c */ +int flexcop_frontend_init(struct flexcop_device *card); +void flexcop_frontend_exit(struct flexcop_device *fc); + +/* from flexcop-i2c.c */ +int flexcop_i2c_init(struct flexcop_device *fc); +void flexcop_i2c_exit(struct flexcop_device *fc); + +/* from flexcop-sram.c */ +int flexcop_sram_init(struct flexcop_device *fc); + +/* from flexcop-misc.c */ +void flexcop_determine_revision(struct flexcop_device *fc); +void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const char *suffix); + +/* from flexcop-hw-filter.c */ +int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff); +void flexcop_hw_filter_init(struct flexcop_device *fc); + +void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff); + +void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6]); +void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff); + +#endif diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c new file mode 100644 index 00000000000..8d270607536 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-dma.c @@ -0,0 +1,149 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-dma.c - methods for configuring and controlling the DMA of the FlexCop. + * + * see flexcop.c for copyright information. + */ +#include "flexcop.h" + +int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size) +{ + u8 *tcpu; + dma_addr_t tdma; + + if (size % 2) { + err("dma buffersize has to be even."); + return -EINVAL; + } + + if ((tcpu = pci_alloc_consistent(pdev, size, &tdma)) != NULL) { + dma->pdev = pdev; + dma->cpu_addr0 = tcpu; + dma->dma_addr0 = tdma; + dma->cpu_addr1 = tcpu + size/2; + dma->dma_addr1 = tdma + size/2; + dma->size = size/2; + return 0; + } + return -ENOMEM; +} +EXPORT_SYMBOL(flexcop_dma_allocate); + +void flexcop_dma_free(struct flexcop_dma *dma) +{ + pci_free_consistent(dma->pdev, dma->size*2,dma->cpu_addr0, dma->dma_addr0); + memset(dma,0,sizeof(struct flexcop_dma)); +} +EXPORT_SYMBOL(flexcop_dma_free); + +int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff) +{ + flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); + + if (no & FC_DMA_1) + v.ctrl_208.DMA1_Timer_Enable_sig = onoff; + + if (no & FC_DMA_2) + v.ctrl_208.DMA2_Timer_Enable_sig = onoff; + + fc->write_ibi_reg(fc,ctrl_208,v); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_control_timer_irq); + +int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff) +{ + flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); + + if (no & FC_DMA_1) + v.ctrl_208.DMA1_IRQ_Enable_sig = onoff; + + if (no & FC_DMA_2) + v.ctrl_208.DMA2_IRQ_Enable_sig = onoff; + + fc->write_ibi_reg(fc,ctrl_208,v); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_control_size_irq); + +int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff) +{ + flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); + + if (no & FC_DMA_1) + v.ctrl_208.DMA1_Size_IRQ_Enable_sig = onoff; + + if (no & FC_DMA_2) + v.ctrl_208.DMA2_Size_IRQ_Enable_sig = onoff; + + fc->write_ibi_reg(fc,ctrl_208,v); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_control_packet_irq); + +int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index) +{ + + flexcop_ibi_value v0x0,v0x4,v0xc; + v0x0.raw = v0x4.raw = v0xc.raw = 0; + + v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2; + v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2; + v0x4.dma_0x4_write.dma_addr_size = dma->size / 4; + + if (index & FC_DMA_SUBADDR_0) + v0x0.dma_0x0.dma_0start = 1; + + if (index & FC_DMA_SUBADDR_1) + v0xc.dma_0xc.dma_1start = 1; + + if (dma_idx & FC_DMA_1) { + fc->write_ibi_reg(fc,dma1_000,v0x0); + fc->write_ibi_reg(fc,dma1_004,v0x4); + fc->write_ibi_reg(fc,dma1_00c,v0xc); + } else { /* (dma_idx & FC_DMA_2) */ + fc->write_ibi_reg(fc,dma2_010,v0x0); + fc->write_ibi_reg(fc,dma2_014,v0x4); + fc->write_ibi_reg(fc,dma2_01c,v0xc); + } + + return 0; +} +EXPORT_SYMBOL(flexcop_dma_config); + +static int flexcop_dma_remap(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, int onoff) +{ + flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c; + flexcop_ibi_value v = fc->read_ibi_reg(fc,r); + v.dma_0xc.remap_enable = onoff; + fc->write_ibi_reg(fc,r,v); + return 0; +} + +/* 1 cycles = 1.97 msec */ +int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles) +{ + flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014; + flexcop_ibi_value v = fc->read_ibi_reg(fc,r); + + flexcop_dma_remap(fc,dma_idx,0); + + v.dma_0x4_write.dmatimer = cycles >> 1; + fc->write_ibi_reg(fc,r,v); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_config_timer); + +int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets) +{ + flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014; + flexcop_ibi_value v = fc->read_ibi_reg(fc,r); + + flexcop_dma_remap(fc,dma_idx,1); + + v.dma_0x4_remap.DMA_maxpackets = packets; + fc->write_ibi_reg(fc,r,v); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_config_packet_count); diff --git a/drivers/media/dvb/b2c2/flexcop-eeprom.c b/drivers/media/dvb/b2c2/flexcop-eeprom.c new file mode 100644 index 00000000000..bbcf070a178 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-eeprom.c @@ -0,0 +1,153 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-eeprom.c - eeprom access methods (currently only MAC address reading is used) + * + * see flexcop.c for copyright information. + */ +#include "flexcop.h" + +#if 0 +/*EEPROM (Skystar2 has one "24LC08B" chip on board) */ +static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len) +{ + return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len); +} + +static int eeprom_lrc_write(struct adapter *adapter, u32 addr, u32 len, u8 *wbuf, u8 *rbuf, int retries) +{ + int i; + + for (i = 0; i < retries; i++) { + if (eeprom_write(adapter, addr, wbuf, len) == len) { + if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1) + return 1; + } + } + + return 0; +} + +/* These functions could be used to unlock SkyStar2 cards. */ + +static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len) +{ + u8 rbuf[20]; + u8 wbuf[20]; + + if (len != 16) + return 0; + + memcpy(wbuf, key, len); + + wbuf[16] = 0; + wbuf[17] = 0; + wbuf[18] = 0; + wbuf[19] = calc_lrc(wbuf, 19); + + return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4); +} + +static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len) +{ + u8 buf[20]; + + if (len != 16) + return 0; + + if (eeprom_lrc_read(adapter, 0x3e4, 20, buf, 4) == 0) + return 0; + + memcpy(key, buf, len); + + return 1; +} + +static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac) +{ + u8 tmp[8]; + + if (type != 0) { + tmp[0] = mac[0]; + tmp[1] = mac[1]; + tmp[2] = mac[2]; + tmp[3] = mac[5]; + tmp[4] = mac[6]; + tmp[5] = mac[7]; + + } else { + + tmp[0] = mac[0]; + tmp[1] = mac[1]; + tmp[2] = mac[2]; + tmp[3] = mac[3]; + tmp[4] = mac[4]; + tmp[5] = mac[5]; + } + + tmp[6] = 0; + tmp[7] = calc_lrc(tmp, 7); + + if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8) + return 1; + + return 0; +} + +static int flexcop_eeprom_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len) +{ + return fc->i2c_request(fc,FC_READ,FC_I2C_PORT_EEPROM,0x50,addr,buf,len); +} + +#endif + +static u8 calc_lrc(u8 *buf, int len) +{ + int i; + u8 sum = 0; + for (i = 0; i < len; i++) + sum = sum ^ buf[i]; + return sum; +} + +static int flexcop_eeprom_request(struct flexcop_device *fc, flexcop_access_op_t op, u16 addr, u8 *buf, u16 len, int retries) +{ + int i,ret = 0; + u8 chipaddr = 0x50 | ((addr >> 8) & 3); + for (i = 0; i < retries; i++) + if ((ret = fc->i2c_request(fc,op,FC_I2C_PORT_EEPROM,chipaddr,addr & 0xff,buf,len)) == 0) + break; + return ret; +} + +static int flexcop_eeprom_lrc_read(struct flexcop_device *fc, u16 addr, u8 *buf, u16 len, int retries) +{ + int ret = flexcop_eeprom_request(fc,FC_READ,addr,buf,len,retries); + if (ret == 0) + if (calc_lrc(buf, len - 1) != buf[len - 1]) + ret = -EINVAL; + return ret; +} + +/* JJ's comment about extended == 1: it is not presently used anywhere but was + * added to the low-level functions for possible support of EUI64 + */ +int flexcop_eeprom_check_mac_addr(struct flexcop_device *fc, int extended) +{ + u8 buf[8]; + int ret = 0; + + if ((ret = flexcop_eeprom_lrc_read(fc,0x3f8,buf,8,4)) == 0) { + if (extended != 0) { + err("TODO: extended (EUI64) MAC addresses aren't completely supported yet"); + ret = -EINVAL; +/* memcpy(fc->dvb_adapter.proposed_mac,buf,3); + mac[3] = 0xfe; + mac[4] = 0xff; + memcpy(&fc->dvb_adapter.proposed_mac[3],&buf[5],3); */ + } else + memcpy(fc->dvb_adapter.proposed_mac,buf,6); + } + return ret; +} +EXPORT_SYMBOL(flexcop_eeprom_check_mac_addr); diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c new file mode 100644 index 00000000000..71be400e9ae --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c @@ -0,0 +1,403 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC. + * + * see flexcop.c for copyright information. + */ +#include "flexcop.h" + +#include "stv0299.h" +#include "mt352.h" +#include "nxt2002.h" +#include "stv0297.h" +#include "mt312.h" + +/* lnb control */ + +static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct flexcop_device *fc = fe->dvb->priv; + flexcop_ibi_value v; + deb_tuner("polarity/voltage = %u\n", voltage); + + v = fc->read_ibi_reg(fc, misc_204); + switch (voltage) { + case SEC_VOLTAGE_OFF: + v.misc_204.ACPI1_sig = 1; + break; + case SEC_VOLTAGE_13: + v.misc_204.ACPI1_sig = 0; + v.misc_204.LNB_L_H_sig = 0; + break; + case SEC_VOLTAGE_18: + v.misc_204.ACPI1_sig = 0; + v.misc_204.LNB_L_H_sig = 1; + break; + default: + err("unknown SEC_VOLTAGE value"); + return -EINVAL; + } + return fc->write_ibi_reg(fc, misc_204, v); +} + +static int flexcop_sleep(struct dvb_frontend* fe) +{ + struct flexcop_device *fc = fe->dvb->priv; +/* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */ + + if (fc->fe_sleep) + return fc->fe_sleep(fe); + +/* v.misc_204.ACPI3_sig = 1; + fc->write_ibi_reg(fc,misc_204,v);*/ + + return 0; +} + +static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone) +{ + /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */ + struct flexcop_device *fc = fe->dvb->priv; + flexcop_ibi_value v; + u16 ax; + v.raw = 0; + + deb_tuner("tone = %u\n",tone); + + switch (tone) { + case SEC_TONE_ON: + ax = 0x01ff; + break; + case SEC_TONE_OFF: + ax = 0; + break; + default: + err("unknown SEC_TONE value"); + return -EINVAL; + } + + v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */ + + v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax; + v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax; + + return fc->write_ibi_reg(fc,lnb_switch_freq_200,v); +} + +static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data) +{ + flexcop_set_tone(fe, SEC_TONE_ON); + udelay(data ? 500 : 1000); + flexcop_set_tone(fe, SEC_TONE_OFF); + udelay(data ? 1000 : 500); +} + +static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data) +{ + int i, par = 1, d; + + for (i = 7; i >= 0; i--) { + d = (data >> i) & 1; + par ^= d; + flexcop_diseqc_send_bit(fe, d); + } + + flexcop_diseqc_send_bit(fe, par); +} + +static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst) +{ + int i; + + flexcop_set_tone(fe, SEC_TONE_OFF); + mdelay(16); + + for (i = 0; i < len; i++) + flexcop_diseqc_send_byte(fe,msg[i]); + + mdelay(16); + + if (burst != -1) { + if (burst) + flexcop_diseqc_send_byte(fe, 0xff); + else { + flexcop_set_tone(fe, SEC_TONE_ON); + udelay(12500); + flexcop_set_tone(fe, SEC_TONE_OFF); + } + msleep(20); + } + return 0; +} + +static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) +{ + return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0); +} + +static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) +{ + return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd); +} + +/* dvb-s stv0299 */ +static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) +{ + u8 aclk = 0; + u8 bclk = 0; + + if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } + else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } + else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } + else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } + else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } + else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } + + stv0299_writereg (fe, 0x13, aclk); + stv0299_writereg (fe, 0x14, bclk); + stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); + stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); + stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); + + return 0; +} + +static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) +{ + u8 buf[4]; + u32 div; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; + struct flexcop_device *fc = fe->dvb->priv; + + div = params->frequency / 125; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = div & 0xff; + buf[2] = 0x84; /* 0xC4 */ + buf[3] = 0x08; + + if (params->frequency < 1500000) buf[3] |= 0x10; + + if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static u8 samsung_tbmu24112_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7D, + 0x05, 0x35, + 0x06, 0x02, + 0x07, 0x00, + 0x08, 0xC3, + 0x0C, 0x00, + 0x0D, 0x81, + 0x0E, 0x23, + 0x0F, 0x12, + 0x10, 0x7E, + 0x11, 0x84, + 0x12, 0xB9, + 0x13, 0x88, + 0x14, 0x89, + 0x15, 0xC9, + 0x16, 0x00, + 0x17, 0x5C, + 0x18, 0x00, + 0x19, 0x00, + 0x1A, 0x00, + 0x1C, 0x00, + 0x1D, 0x00, + 0x1E, 0x00, + 0x1F, 0x3A, + 0x20, 0x2E, + 0x21, 0x80, + 0x22, 0xFF, + 0x23, 0xC1, + 0x28, 0x00, + 0x29, 0x1E, + 0x2A, 0x14, + 0x2B, 0x0F, + 0x2C, 0x09, + 0x2D, 0x05, + 0x31, 0x1F, + 0x32, 0x19, + 0x33, 0xFE, + 0x34, 0x93, + 0xff, 0xff, +}; + +static struct stv0299_config samsung_tbmu24112_config = { + .demod_address = 0x68, + .inittab = samsung_tbmu24112_inittab, + .mclk = 88000000UL, + .invert = 0, + .enhanced_tuning = 0, + .skip_reinit = 0, + .lock_output = STV0229_LOCKOUTPUT_LK, + .volt13_op0_op1 = STV0299_VOLT13_OP1, + .min_delay_ms = 100, + .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, + .pll_set = samsung_tbmu24112_pll_set, +}; + +/* dvb-t mt352 */ +static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe) +{ + static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d }; + static u8 mt352_reset [] = { 0x50, 0x80 }; + static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; + static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 }; + static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; + + mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); + udelay(2000); + mt352_write(fe, mt352_reset, sizeof(mt352_reset)); + mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); + + mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); + mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); + + return 0; +} + +static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf) +{ + u32 div; + unsigned char bs = 0; + + #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ + div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; + + if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09; + if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a; + if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08; + + pllbuf[0] = 0xc2; /* Note: non-linux standard PLL i2c address */ + pllbuf[1] = div >> 8; + pllbuf[2] = div & 0xff; + pllbuf[3] = 0xcc; + pllbuf[4] = bs; + + return 0; +} + +static struct mt352_config samsung_tdtc9251dh0_config = { + + .demod_address = 0x0f, + .demod_init = samsung_tdtc9251dh0_demod_init, + .pll_set = samsung_tdtc9251dh0_pll_set, +}; + +static int nxt2002_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) +{ + struct flexcop_device *fc = fe->dvb->priv; + return request_firmware(fw, name, fc->dev); +} + +static struct nxt2002_config samsung_tbmv_config = { + .demod_address = 0x0a, + .request_firmware = nxt2002_request_firmware, +}; + +static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) +{ + u8 buf[4]; + u32 div; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; + struct flexcop_device *fc = fe->dvb->priv; + + div = (params->frequency + (125/2)) / 125; + + buf[0] = (div >> 8) & 0x7f; + buf[1] = (div >> 0) & 0xff; + buf[2] = 0x84 | ((div >> 10) & 0x60); + buf[3] = 0x80; + + if (params->frequency < 1550000) + buf[3] |= 0x02; + + if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) + return -EIO; + return 0; +} + +static struct mt312_config skystar23_samsung_tbdu18132_config = { + + .demod_address = 0x0e, + .pll_set = skystar23_samsung_tbdu18132_pll_set, +}; + +static struct stv0297_config alps_tdee4_stv0297_config = { + .demod_address = 0x1c, +// .invert = 1, +// .pll_set = alps_tdee4_stv0297_pll_set, +}; + +/* try to figure out the frontend, each card/box can have on of the following list */ +int flexcop_frontend_init(struct flexcop_device *fc) +{ + /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */ + if ((fc->fe = stv0299_attach(&samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) { + fc->fe->ops->set_voltage = flexcop_set_voltage; + + fc->fe_sleep = fc->fe->ops->sleep; + fc->fe->ops->sleep = flexcop_sleep; + + fc->dev_type = FC_SKY; + info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address); + } else + /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */ + if ((fc->fe = mt352_attach(&samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) { + fc->dev_type = FC_AIR_DVB; + info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address); + } else + /* try the air atsc (nxt2002) */ + if ((fc->fe = nxt2002_attach(&samsung_tbmv_config, &fc->i2c_adap)) != NULL) { + fc->dev_type = FC_AIR_ATSC; + info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address); + } else + /* try the cable dvb (stv0297) */ + if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) { + fc->dev_type = FC_CABLE; + info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address); + } else + /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */ + if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) { + fc->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; + fc->fe->ops->diseqc_send_burst = flexcop_diseqc_send_burst; + fc->fe->ops->set_tone = flexcop_set_tone; + fc->fe->ops->set_voltage = flexcop_set_voltage; + + fc->fe_sleep = fc->fe->ops->sleep; + fc->fe->ops->sleep = flexcop_sleep; + + fc->dev_type = FC_SKY_OLD; + info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address); + } + + if (fc->fe == NULL) { + err("no frontend driver found for this B2C2/FlexCop adapter"); + return -ENODEV; + } else { + if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) { + err("frontend registration failed!"); + if (fc->fe->ops->release != NULL) + fc->fe->ops->release(fc->fe); + fc->fe = NULL; + return -EINVAL; + } + } + fc->init_state |= FC_STATE_FE_INIT; + return 0; +} + +void flexcop_frontend_exit(struct flexcop_device *fc) +{ + if (fc->init_state & FC_STATE_FE_INIT) + dvb_unregister_frontend(fc->fe); + + fc->init_state &= ~FC_STATE_FE_INIT; +} diff --git a/drivers/media/dvb/b2c2/flexcop-hw-filter.c b/drivers/media/dvb/b2c2/flexcop-hw-filter.c new file mode 100644 index 00000000000..2baf43d3ce8 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-hw-filter.c @@ -0,0 +1,204 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-hw-filter.c - pid and mac address filtering and corresponding control functions. + * + * see flexcop.c for copyright information. + */ +#include "flexcop.h" + +static void flexcop_rcv_data_ctrl(struct flexcop_device *fc, int onoff) +{ + flexcop_set_ibi_value(ctrl_208,Rcv_Data_sig,onoff); +} + +void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff) +{ + flexcop_set_ibi_value(ctrl_208,SMC_Enable_sig,onoff); +} + +void flexcop_null_filter_ctrl(struct flexcop_device *fc, int onoff) +{ + flexcop_set_ibi_value(ctrl_208,Null_filter_sig,onoff); +} + +void flexcop_set_mac_filter(struct flexcop_device *fc, u8 mac[6]) +{ + flexcop_ibi_value v418,v41c; + v41c = fc->read_ibi_reg(fc,mac_address_41c); + + v418.mac_address_418.MAC1 = mac[0]; + v418.mac_address_418.MAC2 = mac[1]; + v418.mac_address_418.MAC3 = mac[2]; + v418.mac_address_418.MAC6 = mac[3]; + v41c.mac_address_41c.MAC7 = mac[4]; + v41c.mac_address_41c.MAC8 = mac[5]; + + fc->write_ibi_reg(fc,mac_address_418,v418); + fc->write_ibi_reg(fc,mac_address_41c,v41c); +} + +void flexcop_mac_filter_ctrl(struct flexcop_device *fc, int onoff) +{ + flexcop_set_ibi_value(ctrl_208,MAC_filter_Mode_sig,onoff); +} + +static void flexcop_pid_group_filter(struct flexcop_device *fc, u16 pid, u16 mask) +{ + /* index_reg_310.extra_index_reg need to 0 or 7 to work */ + flexcop_ibi_value v30c; + v30c.pid_filter_30c_ext_ind_0_7.Group_PID = pid; + v30c.pid_filter_30c_ext_ind_0_7.Group_mask = mask; + fc->write_ibi_reg(fc,pid_filter_30c,v30c); +} + +static void flexcop_pid_group_filter_ctrl(struct flexcop_device *fc, int onoff) +{ + flexcop_set_ibi_value(ctrl_208,Mask_filter_sig,onoff); +} + +/* this fancy define reduces the code size of the quite similar PID controlling of + * the first 6 PIDs + */ + +#define pid_ctrl(vregname,field,enablefield,trans_field,transval) \ + flexcop_ibi_value vpid = fc->read_ibi_reg(fc, vregname), \ + v208 = fc->read_ibi_reg(fc, ctrl_208); \ +\ + vpid.vregname.field = onoff ? pid : 0x1fff; \ + vpid.vregname.trans_field = transval; \ + v208.ctrl_208.enablefield = onoff; \ +\ + fc->write_ibi_reg(fc,vregname,vpid); \ + fc->write_ibi_reg(fc,ctrl_208,v208); + +static void flexcop_pid_Stream1_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +{ + pid_ctrl(pid_filter_300,Stream1_PID,Stream1_filter_sig,Stream1_trans,0); +} + +static void flexcop_pid_Stream2_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +{ + pid_ctrl(pid_filter_300,Stream2_PID,Stream2_filter_sig,Stream2_trans,0); +} + +static void flexcop_pid_PCR_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +{ + pid_ctrl(pid_filter_304,PCR_PID,PCR_filter_sig,PCR_trans,0); +} + +static void flexcop_pid_PMT_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +{ + pid_ctrl(pid_filter_304,PMT_PID,PMT_filter_sig,PMT_trans,0); +} + +static void flexcop_pid_EMM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +{ + pid_ctrl(pid_filter_308,EMM_PID,EMM_filter_sig,EMM_trans,0); +} + +static void flexcop_pid_ECM_PID_ctrl(struct flexcop_device *fc, u16 pid, int onoff) +{ + pid_ctrl(pid_filter_308,ECM_PID,ECM_filter_sig,ECM_trans,0); +} + +static void flexcop_pid_control(struct flexcop_device *fc, int index, u16 pid,int onoff) +{ + if (pid == 0x2000) + return; + + deb_ts("setting pid: %5d %04x at index %d '%s'\n",pid,pid,index,onoff ? "on" : "off"); + + /* We could use bit magic here to reduce source code size. + * I decided against it, but to use the real register names */ + switch (index) { + case 0: flexcop_pid_Stream1_PID_ctrl(fc,pid,onoff); break; + case 1: flexcop_pid_Stream2_PID_ctrl(fc,pid,onoff); break; + case 2: flexcop_pid_PCR_PID_ctrl(fc,pid,onoff); break; + case 3: flexcop_pid_PMT_PID_ctrl(fc,pid,onoff); break; + case 4: flexcop_pid_EMM_PID_ctrl(fc,pid,onoff); break; + case 5: flexcop_pid_ECM_PID_ctrl(fc,pid,onoff); break; + default: + if (fc->has_32_hw_pid_filter && index < 38) { + flexcop_ibi_value vpid,vid; + + /* set the index */ + vid = fc->read_ibi_reg(fc,index_reg_310); + vid.index_reg_310.index_reg = index - 6; + fc->write_ibi_reg(fc,index_reg_310, vid); + + vpid = fc->read_ibi_reg(fc,pid_n_reg_314); + vpid.pid_n_reg_314.PID = onoff ? pid : 0x1fff; + vpid.pid_n_reg_314.PID_enable_bit = onoff; + fc->write_ibi_reg(fc,pid_n_reg_314, vpid); + } + break; + } +} + +static int flexcop_toggle_fullts_streaming(struct flexcop_device *fc,int onoff) +{ + if (fc->fullts_streaming_state != onoff) { + deb_ts("%s full TS transfer\n",onoff ? "enabling" : "disabling"); + flexcop_pid_group_filter(fc, 0, 0x1fe0 * (!onoff)); + flexcop_pid_group_filter_ctrl(fc,onoff); + fc->fullts_streaming_state = onoff; + } + return 0; +} + +int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff) +{ + int max_pid_filter = 6 + fc->has_32_hw_pid_filter*32; + + fc->feedcount += onoff ? 1 : -1; + if (dvbdmxfeed->index >= max_pid_filter) + fc->extra_feedcount += onoff ? 1 : -1; + + /* toggle complete-TS-streaming when: + * - pid_filtering is not enabled and it is the first or last feed requested + * - pid_filtering is enabled, + * - but the number of requested feeds is exceeded + * - or the requested pid is 0x2000 */ + + if (!fc->pid_filtering && fc->feedcount == onoff) + flexcop_toggle_fullts_streaming(fc,onoff); + + if (fc->pid_filtering) { + flexcop_pid_control(fc,dvbdmxfeed->index,dvbdmxfeed->pid,onoff); + + if (fc->extra_feedcount > 0) + flexcop_toggle_fullts_streaming(fc,1); + else if (dvbdmxfeed->pid == 0x2000) + flexcop_toggle_fullts_streaming(fc,onoff); + else + flexcop_toggle_fullts_streaming(fc,0); + } + + /* if it was the first or last feed request change the stream-status */ + if (fc->feedcount == onoff) { + flexcop_rcv_data_ctrl(fc,onoff); + if (fc->stream_control) + fc->stream_control(fc,onoff); + } + + return 0; +} + +void flexcop_hw_filter_init(struct flexcop_device *fc) +{ + int i; + flexcop_ibi_value v; + for (i = 0; i < 6 + 32*fc->has_32_hw_pid_filter; i++) + flexcop_pid_control(fc,i,0x1fff,0); + + flexcop_pid_group_filter(fc, 0, 0x1fe0); + flexcop_pid_group_filter_ctrl(fc,0); + + v = fc->read_ibi_reg(fc,pid_filter_308); + v.pid_filter_308.EMM_filter_4 = 1; + v.pid_filter_308.EMM_filter_6 = 0; + fc->write_ibi_reg(fc,pid_filter_308,v); + + flexcop_null_filter_ctrl(fc, 1); +} diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c new file mode 100644 index 00000000000..be4266d4ae9 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-i2c.c @@ -0,0 +1,210 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization + * + * see flexcop.c for copyright information. + */ +#include "flexcop.h" + +#define FC_MAX_I2C_RETRIES 100000 + +static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100) +{ + int i; + flexcop_ibi_value r; + + r100->tw_sm_c_100.working_start = 1; + deb_i2c("r100 before: %08x\n",r100->raw); + + fc->write_ibi_reg(fc, tw_sm_c_100, ibi_zero); + fc->write_ibi_reg(fc, tw_sm_c_100, *r100); /* initiating i2c operation */ + + for (i = 0; i < FC_MAX_I2C_RETRIES; i++) { + r = fc->read_ibi_reg(fc, tw_sm_c_100); + + if (!r.tw_sm_c_100.no_base_addr_ack_error) { + if (r.tw_sm_c_100.st_done) { /* && !r.tw_sm_c_100.working_start */ + *r100 = r; + deb_i2c("i2c success\n"); + return 0; + } + } else { + deb_i2c("suffering from an i2c ack_error\n"); + return -EREMOTEIO; + } + } + deb_i2c("tried %d times i2c operation, never finished or too many ack errors.\n",i); + return -EREMOTEIO; +} + +static int flexcop_i2c_read4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf) +{ + flexcop_ibi_value r104; + int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */ + ret; + + if ((ret = flexcop_i2c_operation(fc,&r100)) != 0) { + /* The Cablestar needs a different kind of i2c-transfer (does not + * support "Repeat Start"): + * wait for the ACK failure, + * and do a subsequent read with the Bit 30 enabled + */ + r100.tw_sm_c_100.no_base_addr_ack_error = 1; + if ((ret = flexcop_i2c_operation(fc,&r100)) != 0) { + deb_i2c("no_base_addr read failed. %d\n",ret); + return ret; + } + } + + buf[0] = r100.tw_sm_c_100.data1_reg; + + if (len > 0) { + r104 = fc->read_ibi_reg(fc,tw_sm_c_104); + deb_i2c("read: r100: %08x, r104: %08x\n",r100.raw,r104.raw); + + /* there is at least one more byte, otherwise we wouldn't be here */ + buf[1] = r104.tw_sm_c_104.data2_reg; + if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg; + if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg; + } + + return 0; +} + +static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf) +{ + flexcop_ibi_value r104; + int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */ + r104.raw = 0; + + /* there is at least one byte, otherwise we wouldn't be here */ + r100.tw_sm_c_100.data1_reg = buf[0]; + + r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0; + r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0; + r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0; + + deb_i2c("write: r100: %08x, r104: %08x\n",r100.raw,r104.raw); + + /* write the additional i2c data before doing the actual i2c operation */ + fc->write_ibi_reg(fc,tw_sm_c_104,r104); + return flexcop_i2c_operation(fc,&r100); +} + +int flexcop_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op, + flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len) +{ + int ret; + u16 bytes_to_transfer; + flexcop_ibi_value r100; + + deb_i2c("op = %d\n",op); + r100.raw = 0; + r100.tw_sm_c_100.chipaddr = chipaddr; + r100.tw_sm_c_100.twoWS_rw = op; + r100.tw_sm_c_100.twoWS_port_reg = port; + + while (len != 0) { + bytes_to_transfer = len > 4 ? 4 : len; + + r100.tw_sm_c_100.total_bytes = bytes_to_transfer - 1; + r100.tw_sm_c_100.baseaddr = addr; + + if (op == FC_READ) + ret = flexcop_i2c_read4(fc, r100, buf); + else + ret = flexcop_i2c_write4(fc,r100, buf); + + if (ret < 0) + return ret; + + buf += bytes_to_transfer; + addr += bytes_to_transfer; + len -= bytes_to_transfer; + }; + + return 0; +} +/* exported for PCI i2c */ +EXPORT_SYMBOL(flexcop_i2c_request); + +/* master xfer callback for demodulator */ +static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) +{ + struct flexcop_device *fc = i2c_get_adapdata(i2c_adap); + int i, ret = 0; + + if (down_interruptible(&fc->i2c_sem)) + return -ERESTARTSYS; + + /* reading */ + if (num == 2 && + msgs[0].flags == 0 && + msgs[1].flags == I2C_M_RD && + msgs[0].buf != NULL && + msgs[1].buf != NULL) { + + ret = fc->i2c_request(fc, FC_READ, FC_I2C_PORT_DEMOD, msgs[0].addr, msgs[0].buf[0], msgs[1].buf, msgs[1].len); + + } else for (i = 0; i < num; i++) { /* writing command */ + if (msgs[i].flags != 0 || msgs[i].buf == NULL || msgs[i].len < 2) { + ret = -EINVAL; + break; + } + + ret = fc->i2c_request(fc, FC_WRITE, FC_I2C_PORT_DEMOD, msgs[i].addr, msgs[i].buf[0], &msgs[i].buf[1], msgs[i].len - 1); + } + + if (ret < 0) + err("i2c master_xfer failed"); + else + ret = num; + + up(&fc->i2c_sem); + + return ret; +} + +static u32 flexcop_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm flexcop_algo = { + .name = "FlexCop I2C algorithm", + .id = I2C_ALGO_BIT, + .master_xfer = flexcop_master_xfer, + .functionality = flexcop_i2c_func, +}; + +int flexcop_i2c_init(struct flexcop_device *fc) +{ + int ret; + + sema_init(&fc->i2c_sem,1); + + memset(&fc->i2c_adap, 0, sizeof(struct i2c_adapter)); + strncpy(fc->i2c_adap.name, "B2C2 FlexCop device",I2C_NAME_SIZE); + + i2c_set_adapdata(&fc->i2c_adap,fc); + + fc->i2c_adap.class = I2C_CLASS_TV_DIGITAL; + fc->i2c_adap.algo = &flexcop_algo; + fc->i2c_adap.algo_data = NULL; + fc->i2c_adap.id = I2C_ALGO_BIT; + + if ((ret = i2c_add_adapter(&fc->i2c_adap)) < 0) + return ret; + + fc->init_state |= FC_STATE_I2C_INIT; + return 0; +} + +void flexcop_i2c_exit(struct flexcop_device *fc) +{ + if (fc->init_state & FC_STATE_I2C_INIT) + i2c_del_adapter(&fc->i2c_adap); + + fc->init_state &= ~FC_STATE_I2C_INIT; +} diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c new file mode 100644 index 00000000000..19e06da4677 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-misc.c @@ -0,0 +1,66 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-misc.c - miscellaneous functions. + * + * see flexcop.c for copyright information. + */ +#include "flexcop.h" + +void flexcop_determine_revision(struct flexcop_device *fc) +{ + flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); + + switch (v.misc_204.Rev_N_sig_revision_hi) { + case 0x2: + deb_info("found a FlexCopII.\n"); + fc->rev = FLEXCOP_II; + break; + case 0x3: + deb_info("found a FlexCopIIb.\n"); + fc->rev = FLEXCOP_IIB; + break; + case 0x0: + deb_info("found a FlexCopIII.\n"); + fc->rev = FLEXCOP_III; + break; + default: + err("unkown FlexCop Revision: %x. Please report the linux-dvb@linuxtv.org.",v.misc_204.Rev_N_sig_revision_hi); + break; + } + + if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps)) + deb_info("this FlexCop has the additional 32 hardware pid filter.\n"); + else + deb_info("this FlexCop has only the 6 basic main hardware pid filter.\n"); + /* bus parts have to decide if hw pid filtering is used or not. */ +} + +const char *flexcop_revision_names[] = { + "Unkown chip", + "FlexCopII", + "FlexCopIIb", + "FlexCopIII", +}; + +const char *flexcop_device_names[] = { + "Unkown device", + "AirStar 2 DVB-T", + "AirStar 2 ATSC", + "SkyStar 2 DVB-S", + "SkyStar 2 DVB-S (old version)", + "CableStar 2 DVB-C", +}; + +const char *flexcop_bus_names[] = { + "USB", + "PCI", +}; + +void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const + char *suffix) +{ + info("%s '%s' at the '%s' bus controlled by a '%s' %s",prefix, + flexcop_device_names[fc->dev_type],flexcop_bus_names[fc->bus_type], + flexcop_revision_names[fc->rev],suffix); +} diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c new file mode 100644 index 00000000000..ed717c0073d --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-pci.c @@ -0,0 +1,381 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-pci.c - covers the PCI part including DMA transfers. + * + * see flexcop.c for copyright information. + */ + +#define FC_LOG_PREFIX "flexcop-pci" +#include "flexcop-common.h" + +static int enable_pid_filtering = 1; +module_param(enable_pid_filtering, int, 0444); +MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1"); + +#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG +#define dprintk(level,args...) \ + do { if ((debug & level)) printk(args); } while (0) +#define DEBSTATUS "" +#else +#define dprintk(level,args...) +#define DEBSTATUS " (debugging is not enabled)" +#endif + +#define deb_info(args...) dprintk(0x01,args) +#define deb_reg(args...) dprintk(0x02,args) +#define deb_ts(args...) dprintk(0x04,args) +#define deb_irq(args...) dprintk(0x08,args) + +static int debug = 0; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS); + +#define DRIVER_VERSION "0.1" +#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver" +#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>" + +struct flexcop_pci { + struct pci_dev *pdev; + +#define FC_PCI_INIT 0x01 +#define FC_PCI_DMA_INIT 0x02 + int init_state; + + void __iomem *io_mem; + u32 irq; +/* buffersize (at least for DMA1, need to be % 188 == 0, + * this logic is required */ +#define FC_DEFAULT_DMA1_BUFSIZE (1280 * 188) +#define FC_DEFAULT_DMA2_BUFSIZE (10 * 188) + struct flexcop_dma dma[2]; + + int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */ + u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */ + int count; + + spinlock_t irq_lock; + + struct flexcop_device *fc_dev; +}; + +static int lastwreg,lastwval,lastrreg,lastrval; + +static flexcop_ibi_value flexcop_pci_read_ibi_reg (struct flexcop_device *fc, flexcop_ibi_register r) +{ + struct flexcop_pci *fc_pci = fc->bus_specific; + flexcop_ibi_value v; + v.raw = readl(fc_pci->io_mem + r); + + if (lastrreg != r || lastrval != v.raw) { + lastrreg = r; lastrval = v.raw; + deb_reg("new rd: %3x: %08x\n",r,v.raw); + } + + return v; +} + +static int flexcop_pci_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register r, flexcop_ibi_value v) +{ + struct flexcop_pci *fc_pci = fc->bus_specific; + + if (lastwreg != r || lastwval != v.raw) { + lastwreg = r; lastwval = v.raw; + deb_reg("new wr: %3x: %08x\n",r,v.raw); + } + + writel(v.raw, fc_pci->io_mem + r); + return 0; +} + +/* When PID filtering is turned on, we use the timer IRQ, because small amounts + * of data need to be passed to the user space instantly as well. When PID + * filtering is turned off, we use the page-change-IRQ */ +static irqreturn_t flexcop_pci_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct flexcop_pci *fc_pci = dev_id; + struct flexcop_device *fc = fc_pci->fc_dev; + flexcop_ibi_value v = fc->read_ibi_reg(fc,irq_20c); + irqreturn_t ret = IRQ_HANDLED; + + spin_lock_irq(&fc_pci->irq_lock); + + if (v.irq_20c.DMA1_IRQ_Status == 1) { + if (fc_pci->active_dma1_addr == 0) + flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr0,fc_pci->dma[0].size / 188); + else + flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr1,fc_pci->dma[0].size / 188); + + deb_irq("page change to page: %d\n",!fc_pci->active_dma1_addr); + fc_pci->active_dma1_addr = !fc_pci->active_dma1_addr; + } else if (v.irq_20c.DMA1_Timer_Status == 1) { + /* for the timer IRQ we only can use buffer dmx feeding, because we don't have + * complete TS packets when reading from the DMA memory */ + dma_addr_t cur_addr = + fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2; + u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0; + + deb_irq("irq: %08x cur_addr: %08x: cur_pos: %08x, last_cur_pos: %08x ", + v.raw,cur_addr,cur_pos,fc_pci->last_dma1_cur_pos); + + /* buffer end was reached, restarted from the beginning + * pass the data from last_cur_pos to the buffer end to the demux + */ + if (cur_pos < fc_pci->last_dma1_cur_pos) { + deb_irq(" end was reached: passing %d bytes ",(fc_pci->dma[0].size*2 - 1) - fc_pci->last_dma1_cur_pos); + flexcop_pass_dmx_data(fc_pci->fc_dev, + fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos, + (fc_pci->dma[0].size*2) - fc_pci->last_dma1_cur_pos); + fc_pci->last_dma1_cur_pos = 0; + fc_pci->count = 0; + } + + if (cur_pos > fc_pci->last_dma1_cur_pos) { + deb_irq(" passing %d bytes ",cur_pos - fc_pci->last_dma1_cur_pos); + flexcop_pass_dmx_data(fc_pci->fc_dev, + fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos, + cur_pos - fc_pci->last_dma1_cur_pos); + } + deb_irq("\n"); + + fc_pci->last_dma1_cur_pos = cur_pos; + } else + ret = IRQ_NONE; + + spin_unlock_irq(&fc_pci->irq_lock); + +/* packet count would be ideal for hw filtering, but it isn't working. Either + * the data book is wrong, or I'm unable to read it correctly */ + +/* if (v.irq_20c.DMA1_Size_IRQ_Status == 1) { packet counter */ + + return ret; +} + +static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff) +{ + struct flexcop_pci *fc_pci = fc->bus_specific; + if (onoff) { + flexcop_dma_config(fc,&fc_pci->dma[0],FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1); + flexcop_dma_config(fc,&fc_pci->dma[1],FC_DMA_2,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1); + flexcop_dma_config_timer(fc,FC_DMA_1,1); + + if (fc_pci->fc_dev->pid_filtering) { + fc_pci->last_dma1_cur_pos = 0; + flexcop_dma_control_timer_irq(fc,FC_DMA_1,1); + } else { + fc_pci->active_dma1_addr = 0; + flexcop_dma_control_size_irq(fc,FC_DMA_1,1); + } + +/* flexcop_dma_config_packet_count(fc,FC_DMA_1,0xc0); + flexcop_dma_control_packet_irq(fc,FC_DMA_1,1); */ + + deb_irq("irqs enabled\n"); + } else { + if (fc_pci->fc_dev->pid_filtering) + flexcop_dma_control_timer_irq(fc,FC_DMA_1,0); + else + flexcop_dma_control_size_irq(fc,FC_DMA_1,0); + +// flexcop_dma_control_packet_irq(fc,FC_DMA_1,0); + deb_irq("irqs disabled\n"); + } + + return 0; +} + +static int flexcop_pci_dma_init(struct flexcop_pci *fc_pci) +{ + int ret; + if ((ret = flexcop_dma_allocate(fc_pci->pdev,&fc_pci->dma[0],FC_DEFAULT_DMA1_BUFSIZE)) != 0) + return ret; + + if ((ret = flexcop_dma_allocate(fc_pci->pdev,&fc_pci->dma[1],FC_DEFAULT_DMA2_BUFSIZE)) != 0) + goto dma1_free; + + flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_MEDIA | FC_SRAM_DEST_NET, FC_SRAM_DEST_TARGET_DMA1); + flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2); + + fc_pci->init_state |= FC_PCI_DMA_INIT; + goto success; +dma1_free: + flexcop_dma_free(&fc_pci->dma[0]); + +success: + return ret; +} + +static void flexcop_pci_dma_exit(struct flexcop_pci *fc_pci) +{ + if (fc_pci->init_state & FC_PCI_DMA_INIT) { + flexcop_dma_free(&fc_pci->dma[0]); + flexcop_dma_free(&fc_pci->dma[1]); + } + fc_pci->init_state &= ~FC_PCI_DMA_INIT; +} + +static int flexcop_pci_init(struct flexcop_pci *fc_pci) +{ + int ret; + u8 card_rev; + + pci_read_config_byte(fc_pci->pdev, PCI_CLASS_REVISION, &card_rev); + info("card revision %x", card_rev); + + if ((ret = pci_enable_device(fc_pci->pdev)) != 0) + return ret; + + pci_set_master(fc_pci->pdev); + + /* enable interrupts */ + // pci_write_config_dword(pdev, 0x6c, 0x8000); + + if ((ret = pci_request_regions(fc_pci->pdev, DRIVER_NAME)) != 0) + goto err_pci_disable_device; + + fc_pci->io_mem = pci_iomap(fc_pci->pdev, 0, 0x800); + + if (!fc_pci->io_mem) { + err("cannot map io memory\n"); + ret = -EIO; + goto err_pci_release_regions; + } + + pci_set_drvdata(fc_pci->pdev, fc_pci); + + if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_irq, + SA_SHIRQ, DRIVER_NAME, fc_pci)) != 0) + goto err_pci_iounmap; + + spin_lock_init(&fc_pci->irq_lock); + + fc_pci->init_state |= FC_PCI_INIT; + goto success; + +err_pci_iounmap: + pci_iounmap(fc_pci->pdev, fc_pci->io_mem); + pci_set_drvdata(fc_pci->pdev, NULL); +err_pci_release_regions: + pci_release_regions(fc_pci->pdev); +err_pci_disable_device: + pci_disable_device(fc_pci->pdev); + +success: + return ret; +} + +static void flexcop_pci_exit(struct flexcop_pci *fc_pci) +{ + if (fc_pci->init_state & FC_PCI_INIT) { + free_irq(fc_pci->pdev->irq, fc_pci); + pci_iounmap(fc_pci->pdev, fc_pci->io_mem); + pci_set_drvdata(fc_pci->pdev, NULL); + pci_release_regions(fc_pci->pdev); + pci_disable_device(fc_pci->pdev); + } + fc_pci->init_state &= ~FC_PCI_INIT; +} + + +static int flexcop_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct flexcop_device *fc; + struct flexcop_pci *fc_pci; + int ret = -ENOMEM; + + if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_pci))) == NULL) { + err("out of memory\n"); + return -ENOMEM; + } + +/* general flexcop init */ + fc_pci = fc->bus_specific; + fc_pci->fc_dev = fc; + + fc->read_ibi_reg = flexcop_pci_read_ibi_reg; + fc->write_ibi_reg = flexcop_pci_write_ibi_reg; + fc->i2c_request = flexcop_i2c_request; + fc->get_mac_addr = flexcop_eeprom_check_mac_addr; + + fc->stream_control = flexcop_pci_stream_control; + + if (enable_pid_filtering) + info("will use the HW PID filter."); + else + info("will pass the complete TS to the demuxer."); + + fc->pid_filtering = enable_pid_filtering; + fc->bus_type = FC_PCI; + + fc->dev = &pdev->dev; + fc->owner = THIS_MODULE; + +/* bus specific part */ + fc_pci->pdev = pdev; + if ((ret = flexcop_pci_init(fc_pci)) != 0) + goto err_kfree; + +/* init flexcop */ + if ((ret = flexcop_device_initialize(fc)) != 0) + goto err_pci_exit; + +/* init dma */ + if ((ret = flexcop_pci_dma_init(fc_pci)) != 0) + goto err_fc_exit; + + goto success; +err_fc_exit: + flexcop_device_exit(fc); +err_pci_exit: + flexcop_pci_exit(fc_pci); +err_kfree: + flexcop_device_kfree(fc); +success: + return ret; +} + +/* in theory every _exit function should be called exactly two times, + * here and in the bail-out-part of the _init-function + */ +static void flexcop_pci_remove(struct pci_dev *pdev) +{ + struct flexcop_pci *fc_pci = pci_get_drvdata(pdev); + + flexcop_pci_dma_exit(fc_pci); + flexcop_device_exit(fc_pci->fc_dev); + flexcop_pci_exit(fc_pci); + flexcop_device_kfree(fc_pci->fc_dev); +} + +static struct pci_device_id flexcop_pci_tbl[] = { + { PCI_DEVICE(0x13d0, 0x2103) }, +/* { PCI_DEVICE(0x13d0, 0x2200) }, PCI FlexCopIII ? */ + { }, +}; + +MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl); + +static struct pci_driver flexcop_pci_driver = { + .name = "Technisat/B2C2 FlexCop II/IIb/III PCI", + .id_table = flexcop_pci_tbl, + .probe = flexcop_pci_probe, + .remove = flexcop_pci_remove, +}; + +static int __init flexcop_pci_module_init(void) +{ + return pci_register_driver(&flexcop_pci_driver); +} + +static void __exit flexcop_pci_module_exit(void) +{ + pci_unregister_driver(&flexcop_pci_driver); +} + +module_init(flexcop_pci_module_init); +module_exit(flexcop_pci_module_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_NAME); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h new file mode 100644 index 00000000000..5e131be55cb --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-reg.h @@ -0,0 +1,701 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-reg.h - register abstraction for FlexCopII, FlexCopIIb and FlexCopIII + * + * see flexcop.c for copyright information. + */ +#ifndef __FLEXCOP_REG_H__ +#define __FLEXCOP_REG_H__ + + +typedef enum { + FLEXCOP_UNK = 0, + FLEXCOP_II, + FLEXCOP_IIB, + FLEXCOP_III, +} flexcop_revision_t; + +extern const char *flexcop_revision_names[]; + +typedef enum { + FC_UNK = 0, + FC_AIR_DVB, + FC_AIR_ATSC, + FC_SKY, + FC_SKY_OLD, + FC_CABLE, +} flexcop_device_type_t; + +typedef enum { + FC_USB = 0, + FC_PCI, +} flexcop_bus_t; + +extern const char *flexcop_device_names[]; + +/* FlexCop IBI Registers */ + +/* flexcop_ibi_reg - a huge union representing the register structure */ +typedef union { + u32 raw; + +/* DMA 0x000 to 0x01c + * DMA1 0x000 to 0x00c + * DMA2 0x010 to 0x01c + */ + struct { + u32 dma_0start : 1; /* set: data will be delivered to dma1_address0 */ + u32 dma_0No_update : 1; /* set: dma1_cur_address will be updated, unset: no update */ + u32 dma_address0 :30; /* physical/virtual host memory address0 DMA */ + } dma_0x0; + + struct { + u32 DMA_maxpackets : 8; /* (remapped) PCI DMA1 Packet Count Interrupt. This variable + is able to be read and written while bit(1) of register + 0x00c (remap_enable) is set. This variable represents + the number of packets that will be transmitted to the PCI + host using PCI DMA1 before an interrupt to the PCI is + asserted. This functionality may be enabled using bit(20) + of register 0x208. N=0 disables the IRQ. */ + u32 dma_addr_size :24; /* size of memory buffer in DWORDs (bytesize / 4) for DMA */ + } dma_0x4_remap; + + struct { + u32 dma1timer : 7; /* reading PCI DMA1 timer ... when remap_enable is 0 */ + u32 unused : 1; + u32 dma_addr_size :24; + } dma_0x4_read; + + struct { + u32 unused : 1; + u32 dmatimer : 7; /* writing PCI DMA1 timer ... when remap_enable is 0 */ + u32 dma_addr_size :24; + } dma_0x4_write; + + struct { + u32 unused : 2; + u32 dma_cur_addr :30; /* current physical host memory address pointer for DMA */ + } dma_0x8; + + struct { + u32 dma_1start : 1; /* set: data will be delivered to dma_address1, when dma_address0 is full */ + u32 remap_enable : 1; /* remap enable for 0x0x4(7:0) */ + u32 dma_address1 :30; /* Physical/virtual address 1 on DMA */ + } dma_0xc; + +/* Two-wire Serial Master and Clock 0x100-0x110 */ + struct { +// u32 slave_transmitter : 1; /* ???*/ + u32 chipaddr : 7; /* two-line serial address of the target slave */ + u32 reserved1 : 1; + u32 baseaddr : 8; /* address of the location of the read/write operation */ + u32 data1_reg : 8; /* first byte in two-line serial read/write operation */ + u32 working_start : 1; /* when doing a write operation this indicator is 0 when ready + * set to 1 when doing a write operation */ + u32 twoWS_rw : 1; /* read/write indicator (1 = read, 0 write) */ + u32 total_bytes : 2; /* number of data bytes in each two-line serial transaction (0 = 1 byte, 11 = 4byte)*/ + u32 twoWS_port_reg : 2; /* port selection: 01 - Front End/Demod, 10 - EEPROM, 11 - Tuner */ + u32 no_base_addr_ack_error : 1; /* writing: write-req: frame is produced w/o baseaddr, read-req: read-cycles w/o + * preceding address assignment write frame + * ACK_ERROR = 1 when no ACK from slave in the last transaction */ + u32 st_done : 1; /* indicator for transaction is done */ + } tw_sm_c_100; + + struct { + u32 data2_reg : 8; /* 2nd data byte */ + u32 data3_reg : 8; /* 3rd data byte */ + u32 data4_reg : 8; /* 4th data byte */ + u32 exlicit_stops : 1; /* when set, transactions are produced w/o trailing STOP flag, then send isolated STOP flags */ + u32 force_stop : 1; /* isolated stop flag */ + u32 unused : 6; + } tw_sm_c_104; + +/* Clock. The register allows the FCIII to convert an incoming Master clock + * (MCLK) signal into a lower frequency clock through the use of a LowCounter + * (TLO) and a High- Counter (THI). The time counts for THI and TLO are + * measured in MCLK; each count represents 4 MCLK input clock cycles. + * + * The default output for port #1 is set for Front End Demod communication. (0x108) + * The default output for port #2 is set for EEPROM communication. (0x10c) + * The default output for port #3 is set for Tuner communication. (0x110) + */ + struct { + u32 thi1 : 6; /* Thi for port #1 (def: 100110b; 38) */ + u32 reserved1 : 2; + u32 tlo1 : 5; /* Tlo for port #1 (def: 11100b; 28) */ + u32 reserved2 :19; + } tw_sm_c_108; + + struct { + u32 thi1 : 6; /* Thi for port #2 (def: 111001b; 57) */ + u32 reserved1 : 2; + u32 tlo1 : 5; /* Tlo for port #2 (def: 11100b; 28) */ + u32 reserved2 :19; + } tw_sm_c_10c; + + struct { + u32 thi1 : 6; /* Thi for port #3 (def: 111001b; 57) */ + u32 reserved1 : 2; + u32 tlo1 : 5; /* Tlo for port #3 (def: 11100b; 28) */ + u32 reserved2 :19; + } tw_sm_c_110; + +/* LNB Switch Frequency 0x200 + * Clock that creates the LNB switch tone. The default is set to have a fixed + * low output (not oscillating) to the LNB_CTL line. + */ + struct { + u32 LNB_CTLHighCount_sig :15; /* It is the number of pre-scaled clock cycles that will be low. */ + u32 LNB_CTLLowCount_sig :15; /* For example, to obtain a 22KHz output given a 45 Mhz Master + Clock signal (MCLK), set PreScalar=01 and LowCounter value to 0x1ff. */ + u32 LNB_CTLPrescaler_sig : 2; /* pre-scaler divides MCLK: 00 (no division), 01 by 2, 10 by 4, 11 by 12 */ + } lnb_switch_freq_200; + +/* ACPI, Peripheral Reset, LNB Polarity + * ACPI power conservation mode, LNB polarity selection (low or high voltage), + * and peripheral reset. + */ + struct { + u32 ACPI1_sig : 1; /* turn of the power of tuner and LNB, not implemented in FCIII */ + u32 ACPI3_sig : 1; /* turn of power of the complete satelite receiver board (except FCIII) */ + u32 LNB_L_H_sig : 1; /* low or high voltage for LNB. (0 = low, 1 = high) */ + u32 Per_reset_sig : 1; /* misc. init reset (default: 1), to reset set to low and back to high */ + u32 reserved :20; + u32 Rev_N_sig_revision_hi : 4;/* 0xc in case of FCIII */ + u32 Rev_N_sig_reserved1 : 2; + u32 Rev_N_sig_caps : 1; /* if 1, FCIII has 32 PID- and MAC-filters and is capable of IP multicast */ + u32 Rev_N_sig_reserved2 : 1; + } misc_204; + +/* Control and Status 0x208 to 0x21c */ +/* Gross enable and disable control */ + struct { + u32 Stream1_filter_sig : 1; /* Stream1 PID filtering */ + u32 Stream2_filter_sig : 1; /* Stream2 PID filtering */ + u32 PCR_filter_sig : 1; /* PCR PID filter */ + u32 PMT_filter_sig : 1; /* PMT PID filter */ + + u32 EMM_filter_sig : 1; /* EMM PID filter */ + u32 ECM_filter_sig : 1; /* ECM PID filter */ + u32 Null_filter_sig : 1; /* Filters null packets, PID=0x1fff. */ + u32 Mask_filter_sig : 1; /* mask PID filter */ + + u32 WAN_Enable_sig : 1; /* WAN output line through V8 memory space is activated. */ + u32 WAN_CA_Enable_sig : 1; /* not in FCIII */ + u32 CA_Enable_sig : 1; /* not in FCIII */ + u32 SMC_Enable_sig : 1; /* CI stream data (CAI) goes directly to the smart card intf (opposed IBI 0x600 or SC-cmd buf). */ + + u32 Per_CA_Enable_sig : 1; /* not in FCIII */ + u32 Multi2_Enable_sig : 1; /* ? */ + u32 MAC_filter_Mode_sig : 1; /* (MAC_filter_enable) Globally enables MAC filters for Net PID filteres. */ + u32 Rcv_Data_sig : 1; /* PID filtering module enable. When this bit is a one, the PID filter will + examine and process packets according to all other (individual) PID + filtering controls. If it a zero, no packet processing of any kind will + take place. All data from the tuner will be thrown away. */ + + u32 DMA1_IRQ_Enable_sig : 1; /* When set, a DWORD counter is enabled on PCI DMA1 that asserts the PCI + * interrupt after the specified count for filling the buffer. */ + u32 DMA1_Timer_Enable_sig : 1; /* When set, a timer is enabled on PCI DMA1 that asserts the PCI interrupt + after a specified amount of time. */ + u32 DMA2_IRQ_Enable_sig : 1; /* same as DMA1_IRQ_Enable_sig but for DMA2 */ + u32 DMA2_Timer_Enable_sig : 1; /* same as DMA1_Timer_Enable_sig but for DMA2 */ + + u32 DMA1_Size_IRQ_Enable_sig : 1; /* When set, a packet count detector is enabled on PCI DMA1 that asserts the PCI interrupt. */ + u32 DMA2_Size_IRQ_Enable_sig : 1; /* When set, a packet count detector is enabled on PCI DMA2 that asserts the PCI interrupt. */ + u32 Mailbox_from_V8_Enable_sig: 1; /* When set, writes to the mailbox register produce an interrupt to the + PCI host to indicate that mailbox data is available. */ + + u32 unused : 9; + } ctrl_208; + +/* General status. When a PCI interrupt occurs, this register is read to + * discover the reason for the interrupt. + */ + struct { + u32 DMA1_IRQ_Status : 1; /* When set(1) the DMA1 counter had generated an IRQ. Read Only. */ + u32 DMA1_Timer_Status : 1; /* When set(1) the DMA1 timer had generated an IRQ. Read Only. */ + u32 DMA2_IRQ_Status : 1; /* When set(1) the DMA2 counter had generated an IRQ. Read Only. */ + u32 DMA2_Timer_Status : 1; /* When set(1) the DMA2 timer had generated an IRQ. Read Only. */ + u32 DMA1_Size_IRQ_Status : 1; /* (Read only). This register is read after an interrupt to */ + u32 DMA2_Size_IRQ_Status : 1; /* find out why we had an IRQ. Reading this register will clear this bit. Packet count*/ + u32 Mailbox_from_V8_Status_sig: 1; /* Same as above. Reading this register will clear this bit. */ + u32 Data_receiver_error : 1; /* 1 indicate an error in the receiver Front End (Tuner module) */ + u32 Continuity_error_flag : 1; /* 1 indicates a continuity error in the TS stream. */ + u32 LLC_SNAP_FLAG_set : 1; /* 1 indicates that the LCC_SNAP_FLAG was set. */ + u32 Transport_Error : 1; /* When set indicates that an unexpected packet was received. */ + u32 reserved :21; + } irq_20c; + + +/* Software reset register */ + struct { + u32 reset_blocks : 8; /* Enabled when Block_reset_enable = 0xB2 and 0x208 bits 15:8 = 0x00. + Each bit location represents a 0x100 block of registers. Writing + a one in a bit location resets that block of registers and the logic + that it controls. */ + u32 Block_reset_enable : 8; /* This variable is set to 0xB2 when the register is written. */ + u32 Special_controls :16; /* Asserts Reset_V8 => 0xC258; Turns on pci encryption => 0xC25A; + Turns off pci encryption => 0xC259 Note: pci_encryption default + at power-up is ON. */ + } sw_reset_210; + + struct { + u32 vuart_oe_sig : 1; /* When clear, the V8 processor has sole control of the serial UART + (RS-232 Smart Card interface). When set, the IBI interface + defined by register 0x600 controls the serial UART. */ + u32 v2WS_oe_sig : 1; /* When clear, the V8 processor has direct control of the Two-line + Serial Master EEPROM target. When set, the Two-line Serial Master + EEPROM target interface is controlled by IBI register 0x100. */ + u32 halt_V8_sig : 1; /* When set, contiguous wait states are applied to the V8-space + bus masters. Once this signal is cleared, normal V8-space + operations resume. */ + u32 section_pkg_enable_sig: 1; /* When set, this signal enables the front end translation circuitry + to process section packed transport streams. */ + u32 s2p_sel_sig : 1; /* Serial to parallel conversion. When set, polarized transport data + within the FlexCop3 front end circuitry is converted from a serial + stream into parallel data before downstream processing otherwise + interprets the data. */ + u32 unused1 : 3; + u32 polarity_PS_CLK_sig: 1; /* This signal is used to invert the input polarity of the tranport + stream CLOCK signal before any processing occurs on the transport + stream within FlexCop3. */ + u32 polarity_PS_VALID_sig: 1; /* This signal is used to invert the input polarity of the tranport + stream VALID signal before any processing occurs on the transport + stream within FlexCop3. */ + u32 polarity_PS_SYNC_sig: 1; /* This signal is used to invert the input polarity of the tranport + stream SYNC signal before any processing occurs on the transport + stream within FlexCop3. */ + u32 polarity_PS_ERR_sig: 1; /* This signal is used to invert the input polarity of the tranport + stream ERROR signal before any processing occurs on the transport + stream within FlexCop3. */ + u32 unused2 :20; + } misc_214; + +/* Mailbox from V8 to host */ + struct { + u32 Mailbox_from_V8 :32; /* When this register is written by either the V8 processor or by an + end host, an interrupt is generated to the PCI host to indicate + that mailbox data is available. Reading register 20c will clear + the IRQ. */ + } mbox_v8_to_host_218; + +/* Mailbox from host to v8 Mailbox_to_V8 + * Mailbox_to_V8 mailbox storage register + * used to send messages from PCI to V8. Writing to this register will send an + * IRQ to the V8. Then it can read the data from here. Reading this register + * will clear the IRQ. If the V8 is halted and bit 31 of this register is set, + * then this register is used instead as a direct interface to access the + * V8space memory. + */ + struct { + u32 sysramaccess_data : 8; /* Data byte written or read from the specified address in V8 SysRAM. */ + u32 sysramaccess_addr :15; /* 15 bit address used to access V8 Sys-RAM. */ + u32 unused : 7; + u32 sysramaccess_write: 1; /* Write flag used to latch data into the V8 SysRAM. */ + u32 sysramaccess_busmuster: 1; /* Setting this bit when the V8 is halted at 0x214 Bit(2) allows + this IBI register interface to directly drive the V8-space memory. */ + } mbox_host_to_v8_21c; + + +/* PIDs, Translation Bit, SMC Filter Select 0x300 to 0x31c */ + struct { + u32 Stream1_PID :13; /* Primary use is receiving Net data, so these 13 bits normally + hold the PID value for the desired network stream. */ + u32 Stream1_trans : 1; /* When set, Net translation will take place for Net data ferried in TS packets. */ + u32 MAC_Multicast_filter : 1; /* When clear, multicast MAC filtering is not allowed for Stream1 and PID_n filters. */ + u32 debug_flag_pid_saved : 1; + u32 Stream2_PID :13; /* 13 bits for Stream 2 PID filter value. General use. */ + u32 Stream2_trans : 1; /* When set Tables/CAI translation will take place for the data ferried in + Stream2_PID TS packets. */ + u32 debug_flag_write_status00 : 1; + u32 debug_fifo_problem : 1; + } pid_filter_300; + + struct { + u32 PCR_PID :13; /* PCR stream PID filter value. Primary use is Program Clock Reference stream filtering. */ + u32 PCR_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ + u32 debug_overrun3 : 1; + u32 debug_overrun2 : 1; + u32 PMT_PID :13; /* stream PID filter value. Primary use is Program Management Table segment filtering. */ + u32 PMT_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ + u32 reserved : 2; + } pid_filter_304; + + struct { + u32 EMM_PID :13; /* EMM PID filter value. Primary use is Entitlement Management Messaging for + conditional access-related data. */ + u32 EMM_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ + u32 EMM_filter_4 : 1; /* When set will pass only EMM data possessing the same ID code as the + first four bytes (32 bits) of the end-user s 6-byte Smart Card ID number Select */ + u32 EMM_filter_6 : 1; /* When set will pass only EMM data possessing the same 6-byte code as the end-users + complete 6-byte Smart Card ID number. */ + u32 ECM_PID :13; /* ECM PID filter value. Primary use is Entitlement Control Messaging for conditional + access-related data. */ + u32 ECM_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ + u32 reserved : 2; + } pid_filter_308; + + struct { + u32 Group_PID :13; /* PID value for group filtering. */ + u32 Group_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ + u32 unused1 : 2; + u32 Group_mask :13; /* Mask value used in logical "and" equation that defines group filtering */ + u32 unused2 : 3; + } pid_filter_30c_ext_ind_0_7; + + struct { + u32 net_master_read :17; + u32 unused :15; + } pid_filter_30c_ext_ind_1; + + struct { + u32 net_master_write :17; + u32 unused :15; + } pid_filter_30c_ext_ind_2; + + struct { + u32 next_net_master_write :17; + u32 unused :15; + } pid_filter_30c_ext_ind_3; + + struct { + u32 unused1 : 1; + u32 state_write :10; + u32 reserved1 : 6; /* default: 000100 */ + u32 stack_read :10; + u32 reserved2 : 5; /* default: 00100 */ + } pid_filter_30c_ext_ind_4; + + struct { + u32 stack_cnt :10; + u32 unused :22; + } pid_filter_30c_ext_ind_5; + + struct { + u32 pid_fsm_save_reg0 : 2; + u32 pid_fsm_save_reg1 : 2; + u32 pid_fsm_save_reg2 : 2; + u32 pid_fsm_save_reg3 : 2; + u32 pid_fsm_save_reg4 : 2; + u32 pid_fsm_save_reg300 : 2; + u32 write_status1 : 2; + u32 write_status4 : 2; + u32 data_size_reg :12; + u32 unused : 4; + } pid_filter_30c_ext_ind_6; + + struct { + u32 index_reg : 5; /* (Index pointer) Points at an internal PIDn register. A binary code + representing one of 32 internal PIDn registers as well as its + corresponding internal MAC_lown register. */ + u32 extra_index_reg : 3; /* This vector is used to select between sets of debug signals routed to register 0x30c. */ + u32 AB_select : 1; /* Used in conjunction with 0x31c. read/write to the MAC_highA or MAC_highB register + 0=MAC_highB register, 1=MAC_highA */ + u32 pass_alltables : 1; /* 1=Net packets are not filtered against the Network Table ID found in register 0x400. + All types of networks (DVB, ATSC, ISDB) are passed. */ + u32 unused :22; + } index_reg_310; + + struct { + u32 PID :13; /* PID value */ + u32 PID_trans : 1; /* translation will take place for packets filtered */ + u32 PID_enable_bit : 1; /* When set this PID filter is enabled */ + u32 reserved :17; + } pid_n_reg_314; + + struct { + u32 A4_byte : 8; + u32 A5_byte : 8; + u32 A6_byte : 8; + u32 Enable_bit : 1; /* enabled (1) or disabled (1) */ + u32 HighAB_bit : 1; /* use MAC_highA (1) or MAC_highB (0) as MSB */ + u32 reserved : 6; + } mac_low_reg_318; + + struct { + u32 A1_byte : 8; + u32 A2_byte : 8; + u32 A3_byte : 8; + u32 reserved : 8; + } mac_high_reg_31c; + +/* Table, SMCID,MACDestination Filters 0x400 to 0x41c */ + struct { + u32 reserved :16; +#define fc_data_Tag_ID_DVB 0x3e +#define fc_data_Tag_ID_ATSC 0x3f +#define fc_data_Tag_ID_IDSB 0x8b + u32 data_Tag_ID :16; + } data_tag_400; + + struct { + u32 Card_IDbyte6 : 8; + u32 Card_IDbyte5 : 8; + u32 Card_IDbyte4 : 8; + u32 Card_IDbyte3 : 8; + } card_id_408; + + struct { + u32 Card_IDbyte2 : 8; + u32 Card_IDbyte1 : 8; + } card_id_40c; + + /* holding the unique mac address of the receiver which houses the FlexCopIII */ + struct { + u32 MAC1 : 8; + u32 MAC2 : 8; + u32 MAC3 : 8; + u32 MAC6 : 8; + } mac_address_418; + + struct { + u32 MAC7 : 8; + u32 MAC8 : 8; + u32 reserved : 16; + } mac_address_41c; + + struct { + u32 transmitter_data_byte : 8; + u32 ReceiveDataReady : 1; + u32 ReceiveByteFrameError: 1; + u32 txbuffempty : 1; + u32 reserved :21; + } ci_600; + + struct { + u32 pi_d : 8; + u32 pi_ha :20; + u32 pi_rw : 1; + u32 pi_component_reg : 3; + } pi_604; + + struct { + u32 serialReset : 1; + u32 oncecycle_read : 1; + u32 Timer_Read_req : 1; + u32 Timer_Load_req : 1; + u32 timer_data : 7; + u32 unused : 1; /* ??? not mentioned in data book */ + u32 Timer_addr : 5; + u32 reserved : 3; + u32 pcmcia_a_mod_pwr_n : 1; + u32 pcmcia_b_mod_pwr_n : 1; + u32 config_Done_stat : 1; + u32 config_Init_stat : 1; + u32 config_Prog_n : 1; + u32 config_wr_n : 1; + u32 config_cs_n : 1; + u32 config_cclk : 1; + u32 pi_CiMax_IRQ_n : 1; + u32 pi_timeout_status : 1; + u32 pi_wait_n : 1; + u32 pi_busy_n : 1; + } pi_608; + + struct { + u32 PID :13; + u32 key_enable : 1; +#define fc_key_code_default 0x1 +#define fc_key_code_even 0x2 +#define fc_key_code_odd 0x3 + u32 key_code : 2; + u32 key_array_col : 3; + u32 key_array_row : 5; + u32 dvb_en : 1; /* 0=TS bypasses the Descrambler */ + u32 rw_flag : 1; + u32 reserved : 6; + } dvb_reg_60c; + +/* SRAM and Output Destination 0x700 to 0x714 */ + struct { + u32 sram_addr :15; + u32 sram_rw : 1; /* 0=write, 1=read */ + u32 sram_data : 8; + u32 sc_xfer_bit : 1; + u32 reserved1 : 3; + u32 oe_pin_reg : 1; + u32 ce_pin_reg : 1; + u32 reserved2 : 1; + u32 start_sram_ibi : 1; + } sram_ctrl_reg_700; + + struct { + u32 net_addr_read :16; + u32 net_addr_write :16; + } net_buf_reg_704; + + struct { + u32 cai_read :11; + u32 reserved1 : 5; + u32 cai_write :11; + u32 reserved2 : 6; + u32 cai_cnt : 4; + } cai_buf_reg_708; + + struct { + u32 cao_read :11; + u32 reserved1 : 5; + u32 cap_write :11; + u32 reserved2 : 6; + u32 cao_cnt : 4; + } cao_buf_reg_70c; + + struct { + u32 media_read :11; + u32 reserved1 : 5; + u32 media_write :11; + u32 reserved2 : 6; + u32 media_cnt : 4; + } media_buf_reg_710; + + struct { + u32 NET_Dest : 2; + u32 CAI_Dest : 2; + u32 CAO_Dest : 2; + u32 MEDIA_Dest : 2; + u32 net_ovflow_error : 1; + u32 media_ovflow_error : 1; + u32 cai_ovflow_error : 1; + u32 cao_ovflow_error : 1; + u32 ctrl_usb_wan : 1; + u32 ctrl_sramdma : 1; + u32 ctrl_maximumfill : 1; + u32 reserved :17; + } sram_dest_reg_714; + + struct { + u32 net_cnt :12; + u32 reserved1 : 4; + u32 net_addr_read : 1; + u32 reserved2 : 3; + u32 net_addr_write : 1; + u32 reserved3 :11; + } net_buf_reg_718; + + struct { + u32 wan_speed_sig : 2; + u32 reserved1 : 6; + u32 wan_wait_state : 8; + u32 sram_chip : 2; + u32 sram_memmap : 2; + u32 reserved2 : 4; + u32 wan_pkt_frame : 4; + u32 reserved3 : 4; + } wan_ctrl_reg_71c; +} flexcop_ibi_value; + +extern flexcop_ibi_value ibi_zero; + +typedef enum { + FC_I2C_PORT_DEMOD = 1, + FC_I2C_PORT_EEPROM = 2, + FC_I2C_PORT_TUNER = 3, +} flexcop_i2c_port_t; + +typedef enum { + FC_WRITE = 0, + FC_READ = 1, +} flexcop_access_op_t; + +typedef enum { + FC_SRAM_DEST_NET = 1, + FC_SRAM_DEST_CAI = 2, + FC_SRAM_DEST_CAO = 4, + FC_SRAM_DEST_MEDIA = 8 +} flexcop_sram_dest_t; + +typedef enum { + FC_SRAM_DEST_TARGET_WAN_USB = 0, + FC_SRAM_DEST_TARGET_DMA1 = 1, + FC_SRAM_DEST_TARGET_DMA2 = 2, + FC_SRAM_DEST_TARGET_FC3_CA = 3 +} flexcop_sram_dest_target_t; + +typedef enum { + FC_SRAM_2_32KB = 0, /* 64KB */ + FC_SRAM_1_32KB = 1, /* 32KB - default fow FCII */ + FC_SRAM_1_128KB = 2, /* 128KB */ + FC_SRAM_1_48KB = 3, /* 48KB - default for FCIII */ +} flexcop_sram_type_t; + +typedef enum { + FC_WAN_SPEED_4MBITS = 0, + FC_WAN_SPEED_8MBITS = 1, + FC_WAN_SPEED_12MBITS = 2, + FC_WAN_SPEED_16MBITS = 3, +} flexcop_wan_speed_t; + +typedef enum { + FC_DMA_1 = 1, + FC_DMA_2 = 2, +} flexcop_dma_index_t; + +typedef enum { + FC_DMA_SUBADDR_0 = 1, + FC_DMA_SUBADDR_1 = 2, +} flexcop_dma_addr_index_t; + +/* names of the particular registers */ +typedef enum { + dma1_000 = 0x000, + dma1_004 = 0x004, + dma1_008 = 0x008, + dma1_00c = 0x00c, + dma2_010 = 0x010, + dma2_014 = 0x014, + dma2_018 = 0x018, + dma2_01c = 0x01c, + + tw_sm_c_100 = 0x100, + tw_sm_c_104 = 0x104, + tw_sm_c_108 = 0x108, + tw_sm_c_10c = 0x10c, + tw_sm_c_110 = 0x110, + + lnb_switch_freq_200 = 0x200, + misc_204 = 0x204, + ctrl_208 = 0x208, + irq_20c = 0x20c, + sw_reset_210 = 0x210, + misc_214 = 0x214, + mbox_v8_to_host_218 = 0x218, + mbox_host_to_v8_21c = 0x21c, + + pid_filter_300 = 0x300, + pid_filter_304 = 0x304, + pid_filter_308 = 0x308, + pid_filter_30c = 0x30c, + index_reg_310 = 0x310, + pid_n_reg_314 = 0x314, + mac_low_reg_318 = 0x318, + mac_high_reg_31c = 0x31c, + + data_tag_400 = 0x400, + card_id_408 = 0x408, + card_id_40c = 0x40c, + mac_address_418 = 0x418, + mac_address_41c = 0x41c, + + ci_600 = 0x600, + pi_604 = 0x604, + pi_608 = 0x608, + dvb_reg_60c = 0x60c, + + sram_ctrl_reg_700 = 0x700, + net_buf_reg_704 = 0x704, + cai_buf_reg_708 = 0x708, + cao_buf_reg_70c = 0x70c, + media_buf_reg_710 = 0x710, + sram_dest_reg_714 = 0x714, + net_buf_reg_718 = 0x718, + wan_ctrl_reg_71c = 0x71c, +} flexcop_ibi_register; + +#define flexcop_set_ibi_value(reg,attr,val) { \ + flexcop_ibi_value v = fc->read_ibi_reg(fc,reg); \ + v.reg.attr = val; \ + fc->write_ibi_reg(fc,reg,v); \ +} + +#endif diff --git a/drivers/media/dvb/b2c2/flexcop-sram.c b/drivers/media/dvb/b2c2/flexcop-sram.c new file mode 100644 index 00000000000..01570ec8096 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-sram.c @@ -0,0 +1,403 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-sram.c - functions for controlling the SRAM. + * + * see flexcop.c for copyright information. + */ +#include "flexcop.h" + +static void flexcop_sram_set_chip (struct flexcop_device *fc, flexcop_sram_type_t type) +{ + flexcop_set_ibi_value(wan_ctrl_reg_71c,sram_chip,type); +} + +int flexcop_sram_init(struct flexcop_device *fc) +{ + switch (fc->rev) { + case FLEXCOP_II: + case FLEXCOP_IIB: + flexcop_sram_set_chip(fc,FC_SRAM_1_32KB); + break; + case FLEXCOP_III: + flexcop_sram_set_chip(fc,FC_SRAM_1_48KB); + break; + default: + return -EINVAL; + } + return 0; +} + +int flexcop_sram_set_dest(struct flexcop_device *fc, flexcop_sram_dest_t dest, flexcop_sram_dest_target_t target) +{ + flexcop_ibi_value v; + + v = fc->read_ibi_reg(fc,sram_dest_reg_714); + + if (fc->rev != FLEXCOP_III && target == FC_SRAM_DEST_TARGET_FC3_CA) { + err("SRAM destination target to available on FlexCopII(b)\n"); + return -EINVAL; + } + + deb_sram("sram dest: %x target: %x\n",dest, target); + + if (dest & FC_SRAM_DEST_NET) + v.sram_dest_reg_714.NET_Dest = target; + if (dest & FC_SRAM_DEST_CAI) + v.sram_dest_reg_714.CAI_Dest = target; + if (dest & FC_SRAM_DEST_CAO) + v.sram_dest_reg_714.CAO_Dest = target; + if (dest & FC_SRAM_DEST_MEDIA) + v.sram_dest_reg_714.MEDIA_Dest = target; + + fc->write_ibi_reg(fc,sram_dest_reg_714,v); + udelay(1000); /* TODO delay really necessary */ + + return 0; +} +EXPORT_SYMBOL(flexcop_sram_set_dest); + +void flexcop_wan_set_speed(struct flexcop_device *fc, flexcop_wan_speed_t s) +{ + flexcop_set_ibi_value(wan_ctrl_reg_71c,wan_speed_sig,s); +} +EXPORT_SYMBOL(flexcop_wan_set_speed); + +void flexcop_sram_ctrl(struct flexcop_device *fc, int usb_wan, int sramdma, int maximumfill) +{ + flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714); + v.sram_dest_reg_714.ctrl_usb_wan = usb_wan; + v.sram_dest_reg_714.ctrl_sramdma = sramdma; + v.sram_dest_reg_714.ctrl_maximumfill = maximumfill; + fc->write_ibi_reg(fc,sram_dest_reg_714,v); +} +EXPORT_SYMBOL(flexcop_sram_ctrl); + +#if 0 +static void flexcop_sram_write(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len) +{ + int i, retries; + u32 command; + + for (i = 0; i < len; i++) { + command = bank | addr | 0x04000000 | (*buf << 0x10); + + retries = 2; + + while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) { + mdelay(1); + retries--; + }; + + if (retries == 0) + printk("%s: SRAM timeout\n", __FUNCTION__); + + write_reg_dw(adapter, 0x700, command); + + buf++; + addr++; + } +} + +static void flex_sram_read(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len) +{ + int i, retries; + u32 command, value; + + for (i = 0; i < len; i++) { + command = bank | addr | 0x04008000; + + retries = 10000; + + while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) { + mdelay(1); + retries--; + }; + + if (retries == 0) + printk("%s: SRAM timeout\n", __FUNCTION__); + + write_reg_dw(adapter, 0x700, command); + + retries = 10000; + + while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) { + mdelay(1); + retries--; + }; + + if (retries == 0) + printk("%s: SRAM timeout\n", __FUNCTION__); + + value = read_reg_dw(adapter, 0x700) >> 0x10; + + *buf = (value & 0xff); + + addr++; + buf++; + } +} + +static void sram_write_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len) +{ + u32 bank; + + bank = 0; + + if (adapter->dw_sram_type == 0x20000) { + bank = (addr & 0x18000) << 0x0d; + } + + if (adapter->dw_sram_type == 0x00000) { + if ((addr >> 0x0f) == 0) + bank = 0x20000000; + else + bank = 0x10000000; + } + + flex_sram_write(adapter, bank, addr & 0x7fff, buf, len); +} + +static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len) +{ + u32 bank; + + bank = 0; + + if (adapter->dw_sram_type == 0x20000) { + bank = (addr & 0x18000) << 0x0d; + } + + if (adapter->dw_sram_type == 0x00000) { + if ((addr >> 0x0f) == 0) + bank = 0x20000000; + else + bank = 0x10000000; + } + + flex_sram_read(adapter, bank, addr & 0x7fff, buf, len); +} + +static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len) +{ + u32 length; + + while (len != 0) { + length = len; + + // check if the address range belongs to the same + // 32K memory chip. If not, the data is read from + // one chip at a time. + if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) { + length = (((addr >> 0x0f) + 1) << 0x0f) - addr; + } + + sram_read_chunk(adapter, addr, buf, length); + + addr = addr + length; + buf = buf + length; + len = len - length; + } +} + +static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len) +{ + u32 length; + + while (len != 0) { + length = len; + + // check if the address range belongs to the same + // 32K memory chip. If not, the data is written to + // one chip at a time. + if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) { + length = (((addr >> 0x0f) + 1) << 0x0f) - addr; + } + + sram_write_chunk(adapter, addr, buf, length); + + addr = addr + length; + buf = buf + length; + len = len - length; + } +} + +static void sram_set_size(struct adapter *adapter, u32 mask) +{ + write_reg_dw(adapter, 0x71c, (mask | (~0x30000 & read_reg_dw(adapter, 0x71c)))); +} + +static void sram_init(struct adapter *adapter) +{ + u32 tmp; + + tmp = read_reg_dw(adapter, 0x71c); + + write_reg_dw(adapter, 0x71c, 1); + + if (read_reg_dw(adapter, 0x71c) != 0) { + write_reg_dw(adapter, 0x71c, tmp); + + adapter->dw_sram_type = tmp & 0x30000; + + ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type); + + } else { + + adapter->dw_sram_type = 0x10000; + + ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type); + } + + /* return value is never used? */ +/* return adapter->dw_sram_type; */ +} + +static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr) +{ + u8 tmp1, tmp2; + + dprintk("%s: mask = %x, addr = %x\n", __FUNCTION__, mask, addr); + + sram_set_size(adapter, mask); + sram_init(adapter); + + tmp2 = 0xa5; + tmp1 = 0x4f; + + sram_write(adapter, addr, &tmp2, 1); + sram_write(adapter, addr + 4, &tmp1, 1); + + tmp2 = 0; + + mdelay(20); + + sram_read(adapter, addr, &tmp2, 1); + sram_read(adapter, addr, &tmp2, 1); + + dprintk("%s: wrote 0xa5, read 0x%2x\n", __FUNCTION__, tmp2); + + if (tmp2 != 0xa5) + return 0; + + tmp2 = 0x5a; + tmp1 = 0xf4; + + sram_write(adapter, addr, &tmp2, 1); + sram_write(adapter, addr + 4, &tmp1, 1); + + tmp2 = 0; + + mdelay(20); + + sram_read(adapter, addr, &tmp2, 1); + sram_read(adapter, addr, &tmp2, 1); + + dprintk("%s: wrote 0x5a, read 0x%2x\n", __FUNCTION__, tmp2); + + if (tmp2 != 0x5a) + return 0; + + return 1; +} + +static u32 sram_length(struct adapter *adapter) +{ + if (adapter->dw_sram_type == 0x10000) + return 32768; // 32K + if (adapter->dw_sram_type == 0x00000) + return 65536; // 64K + if (adapter->dw_sram_type == 0x20000) + return 131072; // 128K + + return 32768; // 32K +} + +/* FlexcopII can work with 32K, 64K or 128K of external SRAM memory. + - for 128K there are 4x32K chips at bank 0,1,2,3. + - for 64K there are 2x32K chips at bank 1,2. + - for 32K there is one 32K chip at bank 0. + + FlexCop works only with one bank at a time. The bank is selected + by bits 28-29 of the 0x700 register. + + bank 0 covers addresses 0x00000-0x07fff + bank 1 covers addresses 0x08000-0x0ffff + bank 2 covers addresses 0x10000-0x17fff + bank 3 covers addresses 0x18000-0x1ffff +*/ + +static int flexcop_sram_detect(struct flexcop_device *fc) +{ + flexcop_ibi_value r208,r71c_0,vr71c_1; + + r208 = fc->read_ibi_reg(fc, ctrl_208); + fc->write_ibi_reg(fc, ctrl_208, ibi_zero); + + r71c_0 = fc->read_ibi_reg(fc, wan_ctrl_reg_71c); + + write_reg_dw(adapter, 0x71c, 1); + + tmp3 = read_reg_dw(adapter, 0x71c); + + dprintk("%s: tmp3 = %x\n", __FUNCTION__, tmp3); + + write_reg_dw(adapter, 0x71c, tmp2); + + // check for internal SRAM ??? + tmp3--; + if (tmp3 != 0) { + sram_set_size(adapter, 0x10000); + sram_init(adapter); + write_reg_dw(adapter, 0x208, tmp); + + dprintk("%s: sram size = 32K\n", __FUNCTION__); + + return 32; + } + + if (sram_test_location(adapter, 0x20000, 0x18000) != 0) { + sram_set_size(adapter, 0x20000); + sram_init(adapter); + write_reg_dw(adapter, 0x208, tmp); + + dprintk("%s: sram size = 128K\n", __FUNCTION__); + + return 128; + } + + if (sram_test_location(adapter, 0x00000, 0x10000) != 0) { + sram_set_size(adapter, 0x00000); + sram_init(adapter); + write_reg_dw(adapter, 0x208, tmp); + + dprintk("%s: sram size = 64K\n", __FUNCTION__); + + return 64; + } + + if (sram_test_location(adapter, 0x10000, 0x00000) != 0) { + sram_set_size(adapter, 0x10000); + sram_init(adapter); + write_reg_dw(adapter, 0x208, tmp); + + dprintk("%s: sram size = 32K\n", __FUNCTION__); + + return 32; + } + + sram_set_size(adapter, 0x10000); + sram_init(adapter); + write_reg_dw(adapter, 0x208, tmp); + + dprintk("%s: SRAM detection failed. Set to 32K \n", __FUNCTION__); + + return 0; +} + +static void sll_detect_sram_size(struct adapter *adapter) +{ + sram_detect_for_flex2(adapter); +} + +#endif diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c new file mode 100644 index 00000000000..0113449abd1 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-usb.c @@ -0,0 +1,577 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop-usb.c - covers the USB part. + * + * see flexcop.c for copyright information. + */ + +#define FC_LOG_PREFIX "flexcop_usb" +#include "flexcop-usb.h" +#include "flexcop-common.h" + +/* Version information */ +#define DRIVER_VERSION "0.1" +#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV USB Driver" +#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de>" + +/* debug */ +#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG +#define dprintk(level,args...) \ + do { if ((debug & level)) { printk(args); } } while (0) +#define debug_dump(b,l,method) {\ + int i; \ + for (i = 0; i < l; i++) method("%02x ", b[i]); \ + method("\n");\ +} + +#define DEBSTATUS "" +#else +#define dprintk(level,args...) +#define debug_dump(b,l,method) +#define DEBSTATUS " (debugging is not enabled)" +#endif + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,ts=2,ctrl=4,i2c=8,v8mem=16 (or-able))." DEBSTATUS); +#undef DEBSTATUS + +#define deb_info(args...) dprintk(0x01,args) +#define deb_ts(args...) dprintk(0x02,args) +#define deb_ctrl(args...) dprintk(0x04,args) +#define deb_i2c(args...) dprintk(0x08,args) +#define deb_v8(args...) dprintk(0x10,args) + +/* JLP 111700: we will include the 1 bit gap between the upper and lower 3 bits + * in the IBI address, to make the V8 code simpler. + * PCI ADDRESS FORMAT: 0x71C -> 0000 0111 0001 1100 (these are the six bits used) + * in general: 0000 0HHH 000L LL00 + * IBI ADDRESS FORMAT: RHHH BLLL + * + * where R is the read(1)/write(0) bit, B is the busy bit + * and HHH and LLL are the two sets of three bits from the PCI address. + */ +#define B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(usPCI) (u8) (((usPCI >> 2) & 0x07) + ((usPCI >> 4) & 0x70)) +#define B2C2_FLEX_INTERNALADDR_TO_PCIOFFSET(ucAddr) (u16) (((ucAddr & 0x07) << 2) + ((ucAddr & 0x70) << 4)) + +/* + * DKT 020228 + * - forget about this VENDOR_BUFFER_SIZE, read and write register + * deal with DWORD or 4 bytes, that should be should from now on + * - from now on, we don't support anything older than firm 1.00 + * I eliminated the write register as a 2 trip of writing hi word and lo word + * and force this to write only 4 bytes at a time. + * NOTE: this should work with all the firmware from 1.00 and newer + */ +static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI, u32 *val, u8 read) +{ + struct flexcop_usb *fc_usb = fc->bus_specific; + u8 request = read ? B2C2_USB_READ_REG : B2C2_USB_WRITE_REG; + u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR; + u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) | (read ? 0x80 : 0); + + int len = usb_control_msg(fc_usb->udev, + read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT, + request, + request_type, /* 0xc0 read or 0x40 write*/ + wAddress, + 0, + val, + sizeof(u32), + B2C2_WAIT_FOR_OPERATION_RDW * HZ); + + if (len != sizeof(u32)) { + err("error while %s dword from %d (%d).",read ? "reading" : "writing", + wAddress,wRegOffsPCI); + return -EIO; + } + return 0; +} + +/* + * DKT 010817 - add support for V8 memory read/write and flash update + */ +static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb, + flexcop_usb_request_t req, u8 page, u16 wAddress, + u8 *pbBuffer,u32 buflen) +{ +// u8 dwRequestType; + u8 request_type = USB_TYPE_VENDOR; + u16 wIndex; + int nWaitTime,pipe,len; + + wIndex = page << 8; + + switch (req) { + case B2C2_USB_READ_V8_MEM: + nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ; + request_type |= USB_DIR_IN; +// dwRequestType = (u8) RTYPE_READ_V8_MEMORY; + pipe = B2C2_USB_CTRL_PIPE_IN; + break; + case B2C2_USB_WRITE_V8_MEM: + wIndex |= pbBuffer[0]; + request_type |= USB_DIR_OUT; + nWaitTime = B2C2_WAIT_FOR_OPERATION_V8WRITE; +// dwRequestType = (u8) RTYPE_WRITE_V8_MEMORY; + pipe = B2C2_USB_CTRL_PIPE_OUT; + break; + case B2C2_USB_FLASH_BLOCK: + request_type |= USB_DIR_OUT; + nWaitTime = B2C2_WAIT_FOR_OPERATION_V8FLASH; +// dwRequestType = (u8) RTYPE_WRITE_V8_FLASH; + pipe = B2C2_USB_CTRL_PIPE_OUT; + break; + default: + deb_info("unsupported request for v8_mem_req %x.\n",req); + return -EINVAL; + } + deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n",request_type,req, + wAddress,wIndex,buflen); + + len = usb_control_msg(fc_usb->udev,pipe, + req, + request_type, + wAddress, + wIndex, + pbBuffer, + buflen, + nWaitTime * HZ); + + debug_dump(pbBuffer,len,deb_v8); + + return len == buflen ? 0 : -EIO; +} + +#define bytes_left_to_read_on_page(paddr,buflen) \ + ((V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK)) > buflen \ + ? buflen : (V8_MEMORY_PAGE_SIZE - (paddr & V8_MEMORY_PAGE_MASK))) + +static int flexcop_usb_memory_req(struct flexcop_usb *fc_usb,flexcop_usb_request_t req, + flexcop_usb_mem_page_t page_start, u32 addr, int extended, u8 *buf, u32 len) +{ + int i,ret = 0; + u16 wMax; + u32 pagechunk = 0; + + switch(req) { + case B2C2_USB_READ_V8_MEM: wMax = USB_MEM_READ_MAX; break; + case B2C2_USB_WRITE_V8_MEM: wMax = USB_MEM_WRITE_MAX; break; + case B2C2_USB_FLASH_BLOCK: wMax = USB_FLASH_MAX; break; + default: + return -EINVAL; + break; + } + for (i = 0; i < len;) { + pagechunk = wMax < bytes_left_to_read_on_page(addr,len) ? wMax : bytes_left_to_read_on_page(addr,len); + deb_info("%x\n",(addr & V8_MEMORY_PAGE_MASK) | (V8_MEMORY_EXTENDED*extended)); + if ((ret = flexcop_usb_v8_memory_req(fc_usb,req, + page_start + (addr / V8_MEMORY_PAGE_SIZE), /* actual page */ + (addr & V8_MEMORY_PAGE_MASK) | (V8_MEMORY_EXTENDED*extended), + &buf[i],pagechunk)) < 0) + return ret; + + addr += pagechunk; + len -= pagechunk; + } + return 0; +} + +static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended) +{ + return flexcop_usb_memory_req(fc->bus_specific,B2C2_USB_READ_V8_MEM, + V8_MEMORY_PAGE_FLASH,0x1f010,1,fc->dvb_adapter.proposed_mac,6); +} + +#if 0 +static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set, + flexcop_usb_utility_function_t func, u8 extra, u16 wIndex, + u16 buflen, u8 *pvBuffer) +{ + u16 wValue; + u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR; +// u8 dwRequestType = (u8) RTYPE_GENERIC, + int nWaitTime = 2, + pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN, + len; + + wValue = (func << 8) | extra; + + len = usb_control_msg(fc_usb->udev,pipe, + B2C2_USB_UTILITY, + request_type, + wValue, + wIndex, + pvBuffer, + buflen, + nWaitTime * HZ); + return len == buflen ? 0 : -EIO; +} +#endif + +/* usb i2c stuff */ +static int flexcop_usb_i2c_req(struct flexcop_usb *fc_usb, + flexcop_usb_request_t req, flexcop_usb_i2c_function_t func, + flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u8 buflen) +{ + u16 wValue, wIndex; + int nWaitTime,pipe,len; +// u8 dwRequestType; + u8 request_type = USB_TYPE_VENDOR; + + switch (func) { + case USB_FUNC_I2C_WRITE: + case USB_FUNC_I2C_MULTIWRITE: + case USB_FUNC_I2C_REPEATWRITE: + /* DKT 020208 - add this to support special case of DiSEqC */ + case USB_FUNC_I2C_CHECKWRITE: + pipe = B2C2_USB_CTRL_PIPE_OUT; + nWaitTime = 2; +// dwRequestType = (u8) RTYPE_GENERIC; + request_type |= USB_DIR_OUT; + break; + case USB_FUNC_I2C_READ: + case USB_FUNC_I2C_REPEATREAD: + pipe = B2C2_USB_CTRL_PIPE_IN; + nWaitTime = 2; +// dwRequestType = (u8) RTYPE_GENERIC; + request_type |= USB_DIR_IN; + break; + default: + deb_info("unsupported function for i2c_req %x\n",func); + return -EINVAL; + } + wValue = (func << 8 ) | (port << 4); + wIndex = (chipaddr << 8 ) | addr; + + deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",func,request_type,req, + ((wValue && 0xff) << 8),wValue >> 8,((wIndex && 0xff) << 8),wIndex >> 8); + + len = usb_control_msg(fc_usb->udev,pipe, + req, + request_type, + wValue, + wIndex, + buf, + buflen, + nWaitTime * HZ); + + return len == buflen ? 0 : -EREMOTEIO; +} + +/* actual bus specific access functions, make sure prototype are/will be equal to pci */ +static flexcop_ibi_value flexcop_usb_read_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register reg) +{ + flexcop_ibi_value val; + val.raw = 0; + flexcop_usb_readwrite_dw(fc,reg, &val.raw, 1); + return val; +} + +static int flexcop_usb_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_register reg, flexcop_ibi_value val) +{ + return flexcop_usb_readwrite_dw(fc,reg, &val.raw, 0); +} + +static int flexcop_usb_i2c_request(struct flexcop_device *fc, flexcop_access_op_t op, + flexcop_i2c_port_t port, u8 chipaddr, u8 addr, u8 *buf, u16 len) +{ + if (op == FC_READ) + return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_READ,port,chipaddr,addr,buf,len); + else + return flexcop_usb_i2c_req(fc->bus_specific,B2C2_USB_I2C_REQUEST,USB_FUNC_I2C_WRITE,port,chipaddr,addr,buf,len); +} + +static void flexcop_usb_process_frame(struct flexcop_usb *fc_usb, u8 *buffer, int buffer_length) +{ + u8 *b; + int l; + + deb_ts("tmp_buffer_length=%d, buffer_length=%d\n", fc_usb->tmp_buffer_length, buffer_length); + + if (fc_usb->tmp_buffer_length > 0) { + memcpy(fc_usb->tmp_buffer+fc_usb->tmp_buffer_length, buffer, buffer_length); + fc_usb->tmp_buffer_length += buffer_length; + b = fc_usb->tmp_buffer; + l = fc_usb->tmp_buffer_length; + } else { + b=buffer; + l=buffer_length; + } + + while (l >= 190) { + if (*b == 0xff) + switch (*(b+1) & 0x03) { + case 0x01: /* media packet */ + if ( *(b+2) == 0x47 ) + flexcop_pass_dmx_packets(fc_usb->fc_dev, b+2, 1); + else + deb_ts("not ts packet %02x %02x %02x %02x \n", *(b+2), *(b+3), *(b+4), *(b+5) ); + + b += 190; + l -= 190; + break; + default: + deb_ts("wrong packet type\n"); + l = 0; + break; + } + else { + deb_ts("wrong header\n"); + l = 0; + } + } + + if (l>0) + memcpy(fc_usb->tmp_buffer, b, l); + fc_usb->tmp_buffer_length = l; +} + +static void flexcop_usb_urb_complete(struct urb *urb, struct pt_regs *ptregs) +{ + struct flexcop_usb *fc_usb = urb->context; + int i; + + if (urb->actual_length > 0) + deb_ts("urb completed, bufsize: %d actlen; %d\n",urb->transfer_buffer_length, urb->actual_length); + + for (i = 0; i < urb->number_of_packets; i++) { + if (urb->iso_frame_desc[i].status < 0) { + err("iso frame descriptor %d has an error: %d\n",i,urb->iso_frame_desc[i].status); + } else + if (urb->iso_frame_desc[i].actual_length > 0) { + deb_ts("passed %d bytes to the demux\n",urb->iso_frame_desc[i].actual_length); + + flexcop_usb_process_frame(fc_usb, + urb->transfer_buffer + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].actual_length); + } + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + + usb_submit_urb(urb,GFP_ATOMIC); +} + +static int flexcop_usb_stream_control(struct flexcop_device *fc, int onoff) +{ + /* submit/kill iso packets */ + return 0; +} + +static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb) +{ + int i; + for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) + if (fc_usb->iso_urb[i] != NULL) { + deb_ts("unlinking/killing urb no. %d\n",i); + usb_kill_urb(fc_usb->iso_urb[i]); + usb_free_urb(fc_usb->iso_urb[i]); + } + + if (fc_usb->iso_buffer != NULL) + pci_free_consistent(NULL,fc_usb->buffer_size, fc_usb->iso_buffer, fc_usb->dma_addr); +} + +static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb) +{ + u16 frame_size = fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize; + int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret; + int buffer_offset = 0; + + deb_ts("creating %d iso-urbs with %d frames each of %d bytes size = %d.\n", + B2C2_USB_NUM_ISO_URB, B2C2_USB_FRAMES_PER_ISO, frame_size,bufsize); + + fc_usb->iso_buffer = pci_alloc_consistent(NULL,bufsize,&fc_usb->dma_addr); + if (fc_usb->iso_buffer == NULL) + return -ENOMEM; + memset(fc_usb->iso_buffer, 0, bufsize); + fc_usb->buffer_size = bufsize; + + /* creating iso urbs */ + for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) + if (!(fc_usb->iso_urb[i] = usb_alloc_urb(B2C2_USB_FRAMES_PER_ISO,GFP_ATOMIC))) { + ret = -ENOMEM; + goto urb_error; + } + /* initialising and submitting iso urbs */ + for (i = 0; i < B2C2_USB_NUM_ISO_URB; i++) { + int frame_offset = 0; + struct urb *urb = fc_usb->iso_urb[i]; + deb_ts("initializing and submitting urb no. %d (buf_offset: %d).\n",i,buffer_offset); + + urb->dev = fc_usb->udev; + urb->context = fc_usb; + urb->complete = flexcop_usb_urb_complete; + urb->pipe = B2C2_USB_DATA_PIPE; + urb->transfer_flags = URB_ISO_ASAP; + urb->interval = 1; + urb->number_of_packets = B2C2_USB_FRAMES_PER_ISO; + urb->transfer_buffer_length = frame_size * B2C2_USB_FRAMES_PER_ISO; + urb->transfer_buffer = fc_usb->iso_buffer + buffer_offset; + + buffer_offset += frame_size * B2C2_USB_FRAMES_PER_ISO; + for (j = 0; j < B2C2_USB_FRAMES_PER_ISO; j++) { + deb_ts("urb no: %d, frame: %d, frame_offset: %d\n",i,j,frame_offset); + urb->iso_frame_desc[j].offset = frame_offset; + urb->iso_frame_desc[j].length = frame_size; + frame_offset += frame_size; + } + + if ((ret = usb_submit_urb(fc_usb->iso_urb[i],GFP_ATOMIC))) { + err("submitting urb %d failed with %d.",i,ret); + goto urb_error; + } + deb_ts("submitted urb no. %d.\n",i); + } + +/* SRAM */ + + flexcop_sram_set_dest(fc_usb->fc_dev,FC_SRAM_DEST_MEDIA | FC_SRAM_DEST_NET | + FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_WAN_USB); + flexcop_wan_set_speed(fc_usb->fc_dev,FC_WAN_SPEED_8MBITS); + flexcop_sram_ctrl(fc_usb->fc_dev,1,1,1); + + ret = 0; + goto success; +urb_error: + flexcop_usb_transfer_exit(fc_usb); +success: + return ret; +} + +static int flexcop_usb_init(struct flexcop_usb *fc_usb) +{ + /* use the alternate setting with the larges buffer */ + usb_set_interface(fc_usb->udev,0,1); + switch (fc_usb->udev->speed) { + case USB_SPEED_LOW: + err("cannot handle USB speed because it is to sLOW."); + return -ENODEV; + break; + case USB_SPEED_FULL: + info("running at FULL speed."); + break; + case USB_SPEED_HIGH: + info("running at HIGH speed."); + break; + case USB_SPEED_UNKNOWN: /* fall through */ + default: + err("cannot handle USB speed because it is unkown."); + return -ENODEV; + } + usb_set_intfdata(fc_usb->uintf, fc_usb); + return 0; +} + +static void flexcop_usb_exit(struct flexcop_usb *fc_usb) +{ + usb_set_intfdata(fc_usb->uintf, NULL); +} + +static int flexcop_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct flexcop_usb *fc_usb = NULL; + struct flexcop_device *fc = NULL; + int ret; + + if ((fc = flexcop_device_kmalloc(sizeof(struct flexcop_usb))) == NULL) { + err("out of memory\n"); + return -ENOMEM; + } + +/* general flexcop init */ + fc_usb = fc->bus_specific; + fc_usb->fc_dev = fc; + + fc->read_ibi_reg = flexcop_usb_read_ibi_reg; + fc->write_ibi_reg = flexcop_usb_write_ibi_reg; + fc->i2c_request = flexcop_usb_i2c_request; + fc->get_mac_addr = flexcop_usb_get_mac_addr; + + fc->stream_control = flexcop_usb_stream_control; + + fc->pid_filtering = 1; + fc->bus_type = FC_USB; + + fc->dev = &udev->dev; + fc->owner = THIS_MODULE; + +/* bus specific part */ + fc_usb->udev = udev; + fc_usb->uintf = intf; + if ((ret = flexcop_usb_init(fc_usb)) != 0) + goto err_kfree; + +/* init flexcop */ + if ((ret = flexcop_device_initialize(fc)) != 0) + goto err_usb_exit; + +/* xfer init */ + if ((ret = flexcop_usb_transfer_init(fc_usb)) != 0) + goto err_fc_exit; + + info("%s successfully initialized and connected.",DRIVER_NAME); + ret = 0; + goto success; +err_fc_exit: + flexcop_device_exit(fc); +err_usb_exit: + flexcop_usb_exit(fc_usb); +err_kfree: + flexcop_device_kfree(fc); +success: + return ret; +} + +static void flexcop_usb_disconnect(struct usb_interface *intf) +{ + struct flexcop_usb *fc_usb = usb_get_intfdata(intf); + flexcop_usb_transfer_exit(fc_usb); + flexcop_device_exit(fc_usb->fc_dev); + flexcop_usb_exit(fc_usb); + flexcop_device_kfree(fc_usb->fc_dev); + info("%s successfully deinitialized and disconnected.",DRIVER_NAME); +} + +static struct usb_device_id flexcop_usb_table [] = { + { USB_DEVICE(0x0af7, 0x0101) }, + { } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver flexcop_usb_driver = { + .owner = THIS_MODULE, + .name = "Technisat/B2C2 FlexCop II/IIb/III USB", + .probe = flexcop_usb_probe, + .disconnect = flexcop_usb_disconnect, + .id_table = flexcop_usb_table, +}; + +/* module stuff */ +static int __init flexcop_usb_module_init(void) +{ + int result; + if ((result = usb_register(&flexcop_usb_driver))) { + err("usb_register failed. (%d)",result); + return result; + } + + return 0; +} + +static void __exit flexcop_usb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&flexcop_usb_driver); +} + +module_init(flexcop_usb_module_init); +module_exit(flexcop_usb_module_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_NAME); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/b2c2/flexcop-usb.h b/drivers/media/dvb/b2c2/flexcop-usb.h new file mode 100644 index 00000000000..630e647a2ca --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop-usb.h @@ -0,0 +1,119 @@ +#ifndef __FLEXCOP_USB_H_INCLUDED__ +#define __FLEXCOP_USB_H_INCLUDED__ + +#include <linux/usb.h> + +/* transfer parameters */ +#define B2C2_USB_FRAMES_PER_ISO 4 +#define B2C2_USB_NUM_ISO_URB 4 + +#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(fc_usb->udev,0) +#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(fc_usb->udev,0) +#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(fc_usb->udev,0x81) + +struct flexcop_usb { + struct usb_device *udev; + struct usb_interface *uintf; + + u8 *iso_buffer; + int buffer_size; + dma_addr_t dma_addr; + struct urb *iso_urb[B2C2_USB_NUM_ISO_URB]; + + struct flexcop_device *fc_dev; + + u8 tmp_buffer[1023+190]; + int tmp_buffer_length; +}; + +#if 0 +/* request types TODO What is its use?*/ +typedef enum { + +/* something is wrong with this part + RTYPE_READ_DW = (1 << 6), + RTYPE_WRITE_DW_1 = (3 << 6), + RTYPE_READ_V8_MEMORY = (6 << 6), + RTYPE_WRITE_V8_MEMORY = (7 << 6), + RTYPE_WRITE_V8_FLASH = (8 << 6), + RTYPE_GENERIC = (9 << 6), +*/ +} flexcop_usb_request_type_t; +#endif + +/* request */ +typedef enum { + B2C2_USB_WRITE_V8_MEM = 0x04, + B2C2_USB_READ_V8_MEM = 0x05, + B2C2_USB_READ_REG = 0x08, + B2C2_USB_WRITE_REG = 0x0A, +/* B2C2_USB_WRITEREGLO = 0x0A, */ + B2C2_USB_WRITEREGHI = 0x0B, + B2C2_USB_FLASH_BLOCK = 0x10, + B2C2_USB_I2C_REQUEST = 0x11, + B2C2_USB_UTILITY = 0x12, +} flexcop_usb_request_t; + +/* function definition for I2C_REQUEST */ +typedef enum { + USB_FUNC_I2C_WRITE = 0x01, + USB_FUNC_I2C_MULTIWRITE = 0x02, + USB_FUNC_I2C_READ = 0x03, + USB_FUNC_I2C_REPEATWRITE = 0x04, + USB_FUNC_GET_DESCRIPTOR = 0x05, + USB_FUNC_I2C_REPEATREAD = 0x06, +/* DKT 020208 - add this to support special case of DiSEqC */ + USB_FUNC_I2C_CHECKWRITE = 0x07, + USB_FUNC_I2C_CHECKRESULT = 0x08, +} flexcop_usb_i2c_function_t; + +/* + * function definition for UTILITY request 0x12 + * DKT 020304 - new utility function + */ +typedef enum { + UTILITY_SET_FILTER = 0x01, + UTILITY_DATA_ENABLE = 0x02, + UTILITY_FLEX_MULTIWRITE = 0x03, + UTILITY_SET_BUFFER_SIZE = 0x04, + UTILITY_FLEX_OPERATOR = 0x05, + UTILITY_FLEX_RESET300_START = 0x06, + UTILITY_FLEX_RESET300_STOP = 0x07, + UTILITY_FLEX_RESET300 = 0x08, + UTILITY_SET_ISO_SIZE = 0x09, + UTILITY_DATA_RESET = 0x0A, + UTILITY_GET_DATA_STATUS = 0x10, + UTILITY_GET_V8_REG = 0x11, +/* DKT 020326 - add function for v1.14 */ + UTILITY_SRAM_WRITE = 0x12, + UTILITY_SRAM_READ = 0x13, + UTILITY_SRAM_TESTFILL = 0x14, + UTILITY_SRAM_TESTSET = 0x15, + UTILITY_SRAM_TESTVERIFY = 0x16, +} flexcop_usb_utility_function_t; + +#define B2C2_WAIT_FOR_OPERATION_RW 1*HZ /* 1 s */ +#define B2C2_WAIT_FOR_OPERATION_RDW 3*HZ /* 3 s */ +#define B2C2_WAIT_FOR_OPERATION_WDW 1*HZ /* 1 s */ + +#define B2C2_WAIT_FOR_OPERATION_V8READ 3*HZ /* 3 s */ +#define B2C2_WAIT_FOR_OPERATION_V8WRITE 3*HZ /* 3 s */ +#define B2C2_WAIT_FOR_OPERATION_V8FLASH 3*HZ /* 3 s */ + +typedef enum { + V8_MEMORY_PAGE_DVB_CI = 0x20, + V8_MEMORY_PAGE_DVB_DS = 0x40, + V8_MEMORY_PAGE_MULTI2 = 0x60, + V8_MEMORY_PAGE_FLASH = 0x80 +} flexcop_usb_mem_page_t; + +#define V8_MEMORY_EXTENDED (1 << 15) + +#define USB_MEM_READ_MAX 32 +#define USB_MEM_WRITE_MAX 1 +#define USB_FLASH_MAX 8 + +#define V8_MEMORY_PAGE_SIZE 0x8000 // 32K +#define V8_MEMORY_PAGE_MASK 0x7FFF + +#endif diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c new file mode 100644 index 00000000000..8b5d14dd36e --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop.c @@ -0,0 +1,286 @@ +/* + * flexcop.c - driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * Copyright (C) 2004-5 Patrick Boettcher <patrick.boettcher@desy.de> + * + * based on the skystar2-driver + * Copyright (C) 2003 Vadim Catana, skystar@moldova.cc + * + * Acknowledgements: + * John Jurrius from BBTI, Inc. for extensive support with + * code examples and data books + * + * Bjarne Steinsbo, bjarne at steinsbo.com (some ideas for rewriting) + * + * Contributions to the skystar2-driver have been done by + * Vincenzo Di Massa, hawk.it at tiscalinet.it (several DiSEqC fixes) + * Roberto Ragusa, r.ragusa at libero.it (polishing, restyling the code) + * Niklas Peinecke, peinecke at gdv.uni-hannover.de (hardware pid/mac filtering) + * + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include "flexcop.h" + +#define DRIVER_NAME "B2C2 FlexcopII/II(b)/III digital TV receiver chip" +#define DRIVER_AUTHOR "Patrick Boettcher <patrick.boettcher@desy.de" + +#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG +#define DEBSTATUS "" +#else +#define DEBSTATUS " (debugging is not enabled)" +#endif + +int b2c2_flexcop_debug; +module_param_named(debug, b2c2_flexcop_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram (|-able))." DEBSTATUS); +#undef DEBSTATUS + +/* global zero for ibi values */ +flexcop_ibi_value ibi_zero; + +static int flexcop_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct flexcop_device *fc = dvbdmxfeed->demux->priv; + return flexcop_pid_feed_control(fc,dvbdmxfeed,1); +} + +static int flexcop_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + struct flexcop_device *fc = dvbdmxfeed->demux->priv; + return flexcop_pid_feed_control(fc,dvbdmxfeed,0); +} + +static int flexcop_dvb_init(struct flexcop_device *fc) +{ + int ret; + if ((ret = dvb_register_adapter(&fc->dvb_adapter,"FlexCop Digital TV device",fc->owner)) < 0) { + err("error registering DVB adapter"); + return ret; + } + fc->dvb_adapter.priv = fc; + + fc->demux.dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); + fc->demux.priv = fc; + + fc->demux.filternum = fc->demux.feednum = FC_MAX_FEED; + + fc->demux.start_feed = flexcop_dvb_start_feed; + fc->demux.stop_feed = flexcop_dvb_stop_feed; + fc->demux.write_to_decoder = NULL; + + if ((ret = dvb_dmx_init(&fc->demux)) < 0) { + err("dvb_dmx failed: error %d",ret); + goto err_dmx; + } + + fc->hw_frontend.source = DMX_FRONTEND_0; + + fc->dmxdev.filternum = fc->demux.feednum; + fc->dmxdev.demux = &fc->demux.dmx; + fc->dmxdev.capabilities = 0; + if ((ret = dvb_dmxdev_init(&fc->dmxdev, &fc->dvb_adapter)) < 0) { + err("dvb_dmxdev_init failed: error %d",ret); + goto err_dmx_dev; + } + + if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) { + err("adding hw_frontend to dmx failed: error %d",ret); + goto err_dmx_add_hw_frontend; + } + + fc->mem_frontend.source = DMX_MEMORY_FE; + if ((ret = fc->demux.dmx.add_frontend(&fc->demux.dmx, &fc->mem_frontend)) < 0) { + err("adding mem_frontend to dmx failed: error %d",ret); + goto err_dmx_add_mem_frontend; + } + + if ((ret = fc->demux.dmx.connect_frontend(&fc->demux.dmx, &fc->hw_frontend)) < 0) { + err("connect frontend failed: error %d",ret); + goto err_connect_frontend; + } + + dvb_net_init(&fc->dvb_adapter, &fc->dvbnet, &fc->demux.dmx); + + fc->init_state |= FC_STATE_DVB_INIT; + goto success; + +err_connect_frontend: + fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend); +err_dmx_add_mem_frontend: + fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend); +err_dmx_add_hw_frontend: + dvb_dmxdev_release(&fc->dmxdev); +err_dmx_dev: + dvb_dmx_release(&fc->demux); +err_dmx: + dvb_unregister_adapter(&fc->dvb_adapter); + return ret; + +success: + return 0; +} + +static void flexcop_dvb_exit(struct flexcop_device *fc) +{ + if (fc->init_state & FC_STATE_DVB_INIT) { + dvb_net_release(&fc->dvbnet); + + fc->demux.dmx.close(&fc->demux.dmx); + fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->mem_frontend); + fc->demux.dmx.remove_frontend(&fc->demux.dmx,&fc->hw_frontend); + dvb_dmxdev_release(&fc->dmxdev); + dvb_dmx_release(&fc->demux); + dvb_unregister_adapter(&fc->dvb_adapter); + + deb_info("deinitialized dvb stuff\n"); + } + fc->init_state &= ~FC_STATE_DVB_INIT; +} + +/* these methods are necessary to achieve the long-term-goal of hiding the + * struct flexcop_device from the bus-parts */ +void flexcop_pass_dmx_data(struct flexcop_device *fc, u8 *buf, u32 len) +{ + dvb_dmx_swfilter(&fc->demux, buf, len); +} +EXPORT_SYMBOL(flexcop_pass_dmx_data); + +void flexcop_pass_dmx_packets(struct flexcop_device *fc, u8 *buf, u32 no) +{ + dvb_dmx_swfilter_packets(&fc->demux, buf, no); +} +EXPORT_SYMBOL(flexcop_pass_dmx_packets); + +static void flexcop_reset(struct flexcop_device *fc) +{ + flexcop_ibi_value v210,v204; + +/* reset the flexcop itself */ + fc->write_ibi_reg(fc,ctrl_208,ibi_zero); + + v210.raw = 0; + v210.sw_reset_210.reset_blocks = 0xff; + v210.sw_reset_210.Block_reset_enable = 0xb2; + fc->write_ibi_reg(fc,sw_reset_210,v210); + +/* reset the periphical devices */ + + v204 = fc->read_ibi_reg(fc,misc_204); + v204.misc_204.Per_reset_sig = 0; + fc->write_ibi_reg(fc,misc_204,v204); + v204.misc_204.Per_reset_sig = 1; + fc->write_ibi_reg(fc,misc_204,v204); +} + +struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len) +{ + void *bus; + struct flexcop_device *fc = kmalloc(sizeof(struct flexcop_device), GFP_KERNEL); + if (!fc) { + err("no memory"); + return NULL; + } + memset(fc, 0, sizeof(struct flexcop_device)); + + bus = kmalloc(bus_specific_len, GFP_KERNEL); + if (!bus) { + err("no memory"); + kfree(fc); + return NULL; + } + memset(bus, 0, bus_specific_len); + + fc->bus_specific = bus; + + return fc; +} +EXPORT_SYMBOL(flexcop_device_kmalloc); + +void flexcop_device_kfree(struct flexcop_device *fc) +{ + kfree(fc->bus_specific); + kfree(fc); +} +EXPORT_SYMBOL(flexcop_device_kfree); + +int flexcop_device_initialize(struct flexcop_device *fc) +{ + int ret; + ibi_zero.raw = 0; + + flexcop_reset(fc); + flexcop_determine_revision(fc); + flexcop_sram_init(fc); + flexcop_hw_filter_init(fc); + + flexcop_smc_ctrl(fc, 0); + + if ((ret = flexcop_dvb_init(fc))) + goto error; + + /* do the MAC address reading after initializing the dvb_adapter */ + if (fc->get_mac_addr(fc, 0) == 0) { + u8 *b = fc->dvb_adapter.proposed_mac; + info("MAC address = %02x:%02x:%02x:%02x:%02x:%02x", b[0],b[1],b[2],b[3],b[4],b[5]); + flexcop_set_mac_filter(fc,b); + flexcop_mac_filter_ctrl(fc,1); + } else + warn("reading of MAC address failed.\n"); + + + if ((ret = flexcop_i2c_init(fc))) + goto error; + + if ((ret = flexcop_frontend_init(fc))) + goto error; + + flexcop_device_name(fc,"initialization of","complete"); + + ret = 0; + goto success; +error: + flexcop_device_exit(fc); +success: + return ret; +} +EXPORT_SYMBOL(flexcop_device_initialize); + +void flexcop_device_exit(struct flexcop_device *fc) +{ + flexcop_frontend_exit(fc); + flexcop_i2c_exit(fc); + flexcop_dvb_exit(fc); +} +EXPORT_SYMBOL(flexcop_device_exit); + +static int flexcop_module_init(void) +{ + info(DRIVER_NAME " loaded successfully"); + return 0; +} + +static void flexcop_module_cleanup(void) +{ + info(DRIVER_NAME " unloaded successfully"); +} + +module_init(flexcop_module_init); +module_exit(flexcop_module_cleanup); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_NAME); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/b2c2/flexcop.h b/drivers/media/dvb/b2c2/flexcop.h new file mode 100644 index 00000000000..caa343a97bd --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop.h @@ -0,0 +1,30 @@ +/* + * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * flexcop.h - private header file for all flexcop-chip-source files. + * + * see flexcop.c for copyright information. + */ +#ifndef __FLEXCOP_H__ +#define __FLEXCOP_H___ + +#define FC_LOG_PREFIX "b2c2-flexcop" +#include "flexcop-common.h" + +extern int b2c2_flexcop_debug; + +/* debug */ +#ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG +#define dprintk(level,args...) \ + do { if ((b2c2_flexcop_debug & level)) printk(args); } while (0) +#else +#define dprintk(level,args...) +#endif + +#define deb_info(args...) dprintk(0x01,args) +#define deb_tuner(args...) dprintk(0x02,args) +#define deb_i2c(args...) dprintk(0x04,args) +#define deb_ts(args...) dprintk(0x08,args) +#define deb_sram(args...) dprintk(0x10,args) + +#endif diff --git a/drivers/media/dvb/b2c2/skystar2.c b/drivers/media/dvb/b2c2/skystar2.c index 336c178fcd5..acbc4c34f72 100644 --- a/drivers/media/dvb/b2c2/skystar2.c +++ b/drivers/media/dvb/b2c2/skystar2.c @@ -97,7 +97,7 @@ struct adapter { u8 mac_addr[8]; u32 dw_sram_type; - struct dvb_adapter *dvb_adapter; + struct dvb_adapter dvb_adapter; struct dvb_demux demux; struct dmxdev dmxdev; struct dmx_frontend hw_frontend; @@ -2461,7 +2461,7 @@ static void frontend_init(struct adapter *skystar2) skystar2->pdev->subsystem_vendor, skystar2->pdev->subsystem_device); } else { - if (dvb_register_frontend(skystar2->dvb_adapter, skystar2->fe)) { + if (dvb_register_frontend(&skystar2->dvb_adapter, skystar2->fe)) { printk("skystar2: Frontend registration failed!\n"); if (skystar2->fe->ops->release) skystar2->fe->ops->release(skystar2->fe); @@ -2486,17 +2486,17 @@ static int skystar2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (ret < 0) goto out; - ret = dvb_register_adapter(&dvb_adapter, skystar2_pci_driver.name, + adapter = pci_get_drvdata(pdev); + dvb_adapter = &adapter->dvb_adapter; + + ret = dvb_register_adapter(dvb_adapter, skystar2_pci_driver.name, THIS_MODULE); if (ret < 0) { printk("%s: Error registering DVB adapter\n", __FUNCTION__); goto err_halt; } - adapter = pci_get_drvdata(pdev); - dvb_adapter->priv = adapter; - adapter->dvb_adapter = dvb_adapter; init_MUTEX(&adapter->i2c_sem); @@ -2541,7 +2541,7 @@ static int skystar2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->dmxdev.demux = dmx; adapter->dmxdev.capabilities = 0; - ret = dvb_dmxdev_init(&adapter->dmxdev, adapter->dvb_adapter); + ret = dvb_dmxdev_init(&adapter->dmxdev, &adapter->dvb_adapter); if (ret < 0) goto err_dmx_release; @@ -2559,7 +2559,7 @@ static int skystar2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (ret < 0) goto err_remove_mem_frontend; - dvb_net_init(adapter->dvb_adapter, &adapter->dvbnet, &dvbdemux->dmx); + dvb_net_init(&adapter->dvb_adapter, &adapter->dvbnet, &dvbdemux->dmx); frontend_init(adapter); out: @@ -2576,7 +2576,7 @@ err_dmx_release: err_i2c_del: i2c_del_adapter(&adapter->i2c_adap); err_dvb_unregister: - dvb_unregister_adapter(adapter->dvb_adapter); + dvb_unregister_adapter(&adapter->dvb_adapter); err_halt: driver_halt(pdev); goto out; @@ -2605,7 +2605,7 @@ static void skystar2_remove(struct pci_dev *pdev) if (adapter->fe != NULL) dvb_unregister_frontend(adapter->fe); - dvb_unregister_adapter(adapter->dvb_adapter); + dvb_unregister_adapter(&adapter->dvb_adapter); i2c_del_adapter(&adapter->i2c_adap); diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig index e7d11e0667a..b12545f093f 100644 --- a/drivers/media/dvb/bt8xx/Kconfig +++ b/drivers/media/dvb/bt8xx/Kconfig @@ -11,9 +11,8 @@ config DVB_BT8XX the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards and pcHDTV HD2000 cards. - Since these cards have no MPEG decoder onboard, they transmit + Since these cards have no MPEG decoder onboard, they transmit only compressed MPEG data over the PCI bus, so you need an external software decoder to watch TV on your computer. Say Y if you own such a device and want to use it. - diff --git a/drivers/media/dvb/bt8xx/Makefile b/drivers/media/dvb/bt8xx/Makefile index 9da8604b9e1..d188e4c670b 100644 --- a/drivers/media/dvb/bt8xx/Makefile +++ b/drivers/media/dvb/bt8xx/Makefile @@ -1,5 +1,3 @@ - -obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o +obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o dst_ca.o EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/video -Idrivers/media/dvb/frontends - diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c index 213ff790202..3c5a8e273c4 100644 --- a/drivers/media/dvb/bt8xx/bt878.c +++ b/drivers/media/dvb/bt8xx/bt878.c @@ -4,27 +4,27 @@ * Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@t-online.de> * * large parts based on the bttv driver - * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) - * & Marcus Metzler (mocm@thp.uni-koeln.de) + * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@metzlerbros.de) + * & Marcus Metzler (mocm@metzlerbros.de) * (c) 1999,2000 Gerd Knorr <kraxel@goldbach.in-berlin.de> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * Or, point your browser to http://www.gnu.org/copyleft/gpl.html - * + * */ #include <linux/module.h> @@ -58,7 +58,7 @@ module_param_named(verbose, bt878_verbose, int, 0444); MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)"); module_param_named(debug, bt878_debug, int, 0644); -MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); +MODULE_PARM_DESC(debug, "Turn on/off debugging, default is 0 (off)."); int bt878_num; struct bt878 bt878[BT878_MAX]; @@ -128,21 +128,21 @@ static int bt878_mem_alloc(struct bt878 *bt) } /* RISC instructions */ -#define RISC_WRITE (0x01 << 28) -#define RISC_JUMP (0x07 << 28) -#define RISC_SYNC (0x08 << 28) +#define RISC_WRITE (0x01 << 28) +#define RISC_JUMP (0x07 << 28) +#define RISC_SYNC (0x08 << 28) /* RISC bits */ -#define RISC_WR_SOL (1 << 27) -#define RISC_WR_EOL (1 << 26) -#define RISC_IRQ (1 << 24) +#define RISC_WR_SOL (1 << 27) +#define RISC_WR_EOL (1 << 26) +#define RISC_IRQ (1 << 24) #define RISC_STATUS(status) ((((~status) & 0x0F) << 20) | ((status & 0x0F) << 16)) -#define RISC_SYNC_RESYNC (1 << 15) -#define RISC_SYNC_FM1 0x06 -#define RISC_SYNC_VRO 0x0C +#define RISC_SYNC_RESYNC (1 << 15) +#define RISC_SYNC_FM1 0x06 +#define RISC_SYNC_VRO 0x0C #define RISC_FLUSH() bt->risc_pos = 0 -#define RISC_INSTR(instr) bt->risc_cpu[bt->risc_pos++] = cpu_to_le32(instr) +#define RISC_INSTR(instr) bt->risc_cpu[bt->risc_pos++] = cpu_to_le32(instr) static int bt878_make_risc(struct bt878 *bt) { @@ -173,7 +173,7 @@ static void bt878_risc_program(struct bt878 *bt, u32 op_sync_orin) RISC_INSTR(RISC_SYNC | RISC_SYNC_FM1 | op_sync_orin); RISC_INSTR(0); - dprintk("bt878: risc len lines %u, bytes per line %u\n", + dprintk("bt878: risc len lines %u, bytes per line %u\n", bt->line_count, bt->line_bytes); for (line = 0; line < bt->line_count; line++) { // At the beginning of every block we issue an IRQ with previous (finished) block number set @@ -228,14 +228,14 @@ void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin, * Hacked for DST to: * SCERR | OCERR | FDSR | FTRGT | FBUS | RISCI */ - int_mask = BT878_ASCERR | BT878_AOCERR | BT878_APABORT | - BT878_ARIPERR | BT878_APPERR | BT878_AFDSR | BT878_AFTRGT | + int_mask = BT878_ASCERR | BT878_AOCERR | BT878_APABORT | + BT878_ARIPERR | BT878_APPERR | BT878_AFDSR | BT878_AFTRGT | BT878_AFBUS | BT878_ARISCI; /* ignore pesky bits */ int_mask &= ~irq_err_ignore; - + btwrite(int_mask, BT878_AINT_MASK); btwrite(controlreg, BT878_AGPIO_DMA_CTL); } @@ -461,9 +461,9 @@ static int __devinit bt878_probe(struct pci_dev *dev, pci_set_drvdata(dev, bt); /* if(init_bt878(btv) < 0) { - bt878_remove(dev); - return -EIO; - } + bt878_remove(dev); + return -EIO; + } */ if ((result = bt878_mem_alloc(bt))) { @@ -536,10 +536,10 @@ static struct pci_device_id bt878_pci_tbl[] __devinitdata = { MODULE_DEVICE_TABLE(pci, bt878_pci_tbl); static struct pci_driver bt878_pci_driver = { - .name = "bt878", + .name = "bt878", .id_table = bt878_pci_tbl, - .probe = bt878_probe, - .remove = bt878_remove, + .probe = bt878_probe, + .remove = bt878_remove, }; static int bt878_pci_driver_registered = 0; @@ -558,7 +558,7 @@ static int bt878_init_module(void) (BT878_VERSION_CODE >> 8) & 0xff, BT878_VERSION_CODE & 0xff); /* - bt878_check_chipset(); + bt878_check_chipset(); */ /* later we register inside of bt878_find_audio_dma() * because we may want to ignore certain cards */ diff --git a/drivers/media/dvb/bt8xx/bt878.h b/drivers/media/dvb/bt8xx/bt878.h index e1b9809d1b0..837623f7fcd 100644 --- a/drivers/media/dvb/bt8xx/bt878.h +++ b/drivers/media/dvb/bt8xx/bt878.h @@ -1,4 +1,4 @@ -/* +/* bt878.h - Bt878 audio module (register offsets) Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@t-online.de> @@ -120,14 +120,14 @@ struct bt878 { u32 risc_pos; struct tasklet_struct tasklet; - int shutdown; + int shutdown; }; extern struct bt878 bt878[BT878_MAX]; void bt878_start(struct bt878 *bt, u32 controlreg, u32 op_sync_orin, u32 irq_err_ignore); -void bt878_stop(struct bt878 *bt); +void bt878_stop(struct bt878 *bt); #if defined(__powerpc__) /* big-endian */ extern __inline__ void io_st_le32(volatile unsigned __iomem *addr, unsigned val) diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c index eac83768dfd..1339912c308 100644 --- a/drivers/media/dvb/bt8xx/dst.c +++ b/drivers/media/dvb/bt8xx/dst.c @@ -1,25 +1,25 @@ /* - Frontend-driver for TwinHan DST Frontend - Copyright (C) 2003 Jamie Honan + Frontend/Card driver for TwinHan DST Frontend + Copyright (C) 2003 Jamie Honan + Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com) - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -31,59 +31,22 @@ #include "dvb_frontend.h" #include "dst_priv.h" -#include "dst.h" - -struct dst_state { - - struct i2c_adapter* i2c; - - struct bt878* bt; - - struct dvb_frontend_ops ops; - - /* configuration settings */ - const struct dst_config* config; - - struct dvb_frontend frontend; - - /* private demodulator data */ - u8 tx_tuna[10]; - u8 rx_tuna[10]; - u8 rxbuffer[10]; - u8 diseq_flags; - u8 dst_type; - u32 type_flags; - u32 frequency; /* intermediate frequency in kHz for QPSK */ - fe_spectral_inversion_t inversion; - u32 symbol_rate; /* symbol rate in Symbols per second */ - fe_code_rate_t fec; - fe_sec_voltage_t voltage; - fe_sec_tone_mode_t tone; - u32 decode_freq; - u8 decode_lock; - u16 decode_strength; - u16 decode_snr; - unsigned long cur_jiff; - u8 k22; - fe_bandwidth_t bandwidth; -}; +#include "dst_common.h" + -static unsigned int dst_verbose = 0; -module_param(dst_verbose, int, 0644); -MODULE_PARM_DESC(dst_verbose, "verbose startup messages, default is 1 (yes)"); -static unsigned int dst_debug = 0; -module_param(dst_debug, int, 0644); -MODULE_PARM_DESC(dst_debug, "debug messages, default is 0 (no)"); +static unsigned int verbose = 1; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)"); -#define dprintk if (dst_debug) printk +static unsigned int debug = 1; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "debug messages, default is 0 (yes)"); -#define DST_TYPE_IS_SAT 0 -#define DST_TYPE_IS_TERR 1 -#define DST_TYPE_IS_CABLE 2 +static unsigned int dst_addons; +module_param(dst_addons, int, 0644); +MODULE_PARM_DESC(dst_addons, "CA daughterboard, default is 0 (No addons)"); -#define DST_TYPE_HAS_NEWTUNE 1 -#define DST_TYPE_HAS_TS204 2 -#define DST_TYPE_HAS_SYMDIV 4 +#define dprintk if (debug) printk #define HAS_LOCK 1 #define ATTEMPT_TUNE 2 @@ -97,7 +60,7 @@ static void dst_packsize(struct dst_state* state, int psize) bt878_device_control(state->bt, DST_IG_TS, &bits); } -static int dst_gpio_outb(struct dst_state* state, u32 mask, u32 enbb, u32 outhigh) +int dst_gpio_outb(struct dst_state* state, u32 mask, u32 enbb, u32 outhigh, int delay) { union dst_gpio_packet enb; union dst_gpio_packet bits; @@ -105,26 +68,33 @@ static int dst_gpio_outb(struct dst_state* state, u32 mask, u32 enbb, u32 outhig enb.enb.mask = mask; enb.enb.enable = enbb; + if (verbose > 4) + dprintk("%s: mask=[%04x], enbb=[%04x], outhigh=[%04x]\n", __FUNCTION__, mask, enbb, outhigh); + if ((err = bt878_device_control(state->bt, DST_IG_ENABLE, &enb)) < 0) { - dprintk("%s: dst_gpio_enb error (err == %i, mask == 0x%02x, enb == 0x%02x)\n", __FUNCTION__, err, mask, enbb); + dprintk("%s: dst_gpio_enb error (err == %i, mask == %02x, enb == %02x)\n", __FUNCTION__, err, mask, enbb); return -EREMOTEIO; } - + udelay(1000); /* because complete disabling means no output, no need to do output packet */ if (enbb == 0) return 0; + if (delay) + msleep(10); + bits.outp.mask = enbb; bits.outp.highvals = outhigh; if ((err = bt878_device_control(state->bt, DST_IG_WRITE, &bits)) < 0) { - dprintk("%s: dst_gpio_outb error (err == %i, enbb == 0x%02x, outhigh == 0x%02x)\n", __FUNCTION__, err, enbb, outhigh); + dprintk("%s: dst_gpio_outb error (err == %i, enbb == %02x, outhigh == %02x)\n", __FUNCTION__, err, enbb, outhigh); return -EREMOTEIO; } return 0; } +EXPORT_SYMBOL(dst_gpio_outb); -static int dst_gpio_inb(struct dst_state *state, u8 * result) +int dst_gpio_inb(struct dst_state *state, u8 * result) { union dst_gpio_packet rd_packet; int err; @@ -139,143 +109,225 @@ static int dst_gpio_inb(struct dst_state *state, u8 * result) *result = (u8) rd_packet.rd.value; return 0; } +EXPORT_SYMBOL(dst_gpio_inb); -#define DST_I2C_ENABLE 1 -#define DST_8820 2 - -static int dst_reset8820(struct dst_state *state) +int rdc_reset_state(struct dst_state *state) { - int retval; - /* pull 8820 gpio pin low, wait, high, wait, then low */ - // dprintk ("%s: reset 8820\n", __FUNCTION__); - retval = dst_gpio_outb(state, DST_8820, DST_8820, 0); - if (retval < 0) - return retval; + if (verbose > 1) + dprintk("%s: Resetting state machine\n", __FUNCTION__); + + if (dst_gpio_outb(state, RDC_8820_INT, RDC_8820_INT, 0, NO_DELAY) < 0) { + dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__); + return -1; + } + msleep(10); - retval = dst_gpio_outb(state, DST_8820, DST_8820, DST_8820); - if (retval < 0) - return retval; - /* wait for more feedback on what works here * - msleep(10); - retval = dst_gpio_outb(dst, DST_8820, DST_8820, 0); - if (retval < 0) - return retval; - */ + + if (dst_gpio_outb(state, RDC_8820_INT, RDC_8820_INT, RDC_8820_INT, NO_DELAY) < 0) { + dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__); + msleep(10); + return -1; + } + return 0; } +EXPORT_SYMBOL(rdc_reset_state); -static int dst_i2c_enable(struct dst_state *state) +int rdc_8820_reset(struct dst_state *state) { - int retval; - /* pull I2C enable gpio pin low, wait */ - // dprintk ("%s: i2c enable\n", __FUNCTION__); - retval = dst_gpio_outb(state, ~0, DST_I2C_ENABLE, 0); - if (retval < 0) - return retval; - // dprintk ("%s: i2c enable delay\n", __FUNCTION__); - msleep(33); + if (verbose > 1) + dprintk("%s: Resetting DST\n", __FUNCTION__); + + if (dst_gpio_outb(state, RDC_8820_RESET, RDC_8820_RESET, 0, NO_DELAY) < 0) { + dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__); + return -1; + } + udelay(1000); + if (dst_gpio_outb(state, RDC_8820_RESET, RDC_8820_RESET, RDC_8820_RESET, DELAY) < 0) { + dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__); + return -1; + } + return 0; } +EXPORT_SYMBOL(rdc_8820_reset); -static int dst_i2c_disable(struct dst_state *state) +int dst_pio_enable(struct dst_state *state) { - int retval; - /* release I2C enable gpio pin, wait */ - // dprintk ("%s: i2c disable\n", __FUNCTION__); - retval = dst_gpio_outb(state, ~0, 0, 0); - if (retval < 0) - return retval; - // dprintk ("%s: i2c disable delay\n", __FUNCTION__); - msleep(33); + if (dst_gpio_outb(state, ~0, RDC_8820_PIO_0_ENABLE, 0, NO_DELAY) < 0) { + dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__); + return -1; + } + udelay(1000); + return 0; +} +EXPORT_SYMBOL(dst_pio_enable); + +int dst_pio_disable(struct dst_state *state) +{ + if (dst_gpio_outb(state, ~0, RDC_8820_PIO_0_DISABLE, RDC_8820_PIO_0_DISABLE, NO_DELAY) < 0) { + dprintk("%s: dst_gpio_outb ERROR !\n", __FUNCTION__); + return -1; + } + if (state->type_flags & DST_TYPE_HAS_FW_1) + udelay(1000); + return 0; } +EXPORT_SYMBOL(dst_pio_disable); -static int dst_wait_dst_ready(struct dst_state *state) +int dst_wait_dst_ready(struct dst_state *state, u8 delay_mode) { u8 reply; - int retval; int i; + for (i = 0; i < 200; i++) { - retval = dst_gpio_inb(state, &reply); - if (retval < 0) - return retval; - if ((reply & DST_I2C_ENABLE) == 0) { - dprintk("%s: dst wait ready after %d\n", __FUNCTION__, i); + if (dst_gpio_inb(state, &reply) < 0) { + dprintk("%s: dst_gpio_inb ERROR !\n", __FUNCTION__); + return -1; + } + + if ((reply & RDC_8820_PIO_0_ENABLE) == 0) { + if (verbose > 4) + dprintk("%s: dst wait ready after %d\n", __FUNCTION__, i); return 1; } msleep(10); } - dprintk("%s: dst wait NOT ready after %d\n", __FUNCTION__, i); + if (verbose > 1) + dprintk("%s: dst wait NOT ready after %d\n", __FUNCTION__, i); + + return 0; +} +EXPORT_SYMBOL(dst_wait_dst_ready); + +int dst_error_recovery(struct dst_state *state) +{ + dprintk("%s: Trying to return from previous errors...\n", __FUNCTION__); + dst_pio_disable(state); + msleep(10); + dst_pio_enable(state); + msleep(10); + return 0; } +EXPORT_SYMBOL(dst_error_recovery); + +int dst_error_bailout(struct dst_state *state) +{ + dprintk("%s: Trying to bailout from previous error...\n", __FUNCTION__); + rdc_8820_reset(state); + dst_pio_disable(state); + msleep(10); + + return 0; +} +EXPORT_SYMBOL(dst_error_bailout); + + +int dst_comm_init(struct dst_state* state) +{ + if (verbose > 1) + dprintk ("%s: Initializing DST..\n", __FUNCTION__); + if ((dst_pio_enable(state)) < 0) { + dprintk("%s: PIO Enable Failed.\n", __FUNCTION__); + return -1; + } + if ((rdc_reset_state(state)) < 0) { + dprintk("%s: RDC 8820 State RESET Failed.\n", __FUNCTION__); + return -1; + } + if (state->type_flags & DST_TYPE_HAS_FW_1) + msleep(100); + else + msleep(5); + + return 0; +} +EXPORT_SYMBOL(dst_comm_init); + -static int write_dst(struct dst_state *state, u8 * data, u8 len) +int write_dst(struct dst_state *state, u8 *data, u8 len) { struct i2c_msg msg = { .addr = state->config->demod_address,.flags = 0,.buf = data,.len = len }; + int err; int cnt; - - if (dst_debug && dst_verbose) { + if (debug && (verbose > 4)) { u8 i; - dprintk("%s writing", __FUNCTION__); - for (i = 0; i < len; i++) { - dprintk(" 0x%02x", data[i]); + if (verbose > 4) { + dprintk("%s writing", __FUNCTION__); + for (i = 0; i < len; i++) + dprintk(" %02x", data[i]); + dprintk("\n"); } - dprintk("\n"); } - msleep(30); - for (cnt = 0; cnt < 4; cnt++) { + for (cnt = 0; cnt < 2; cnt++) { if ((err = i2c_transfer(state->i2c, &msg, 1)) < 0) { - dprintk("%s: write_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)\n", __FUNCTION__, err, len, data[0]); - dst_i2c_disable(state); - msleep(500); - dst_i2c_enable(state); - msleep(500); + dprintk("%s: _write_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)\n", __FUNCTION__, err, len, data[0]); + dst_error_recovery(state); continue; } else break; } - if (cnt >= 4) - return -EREMOTEIO; + + if (cnt >= 2) { + if (verbose > 1) + printk("%s: RDC 8820 RESET...\n", __FUNCTION__); + dst_error_bailout(state); + + return -1; + } + return 0; } +EXPORT_SYMBOL(write_dst); -static int read_dst(struct dst_state *state, u8 * ret, u8 len) +int read_dst(struct dst_state *state, u8 * ret, u8 len) { struct i2c_msg msg = {.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = ret,.len = len }; int err; int cnt; - for (cnt = 0; cnt < 4; cnt++) { + for (cnt = 0; cnt < 2; cnt++) { if ((err = i2c_transfer(state->i2c, &msg, 1)) < 0) { + dprintk("%s: read_dst error (err == %i, len == 0x%02x, b0 == 0x%02x)\n", __FUNCTION__, err, len, ret[0]); - dst_i2c_disable(state); - dst_i2c_enable(state); + dst_error_recovery(state); + continue; } else break; } - if (cnt >= 4) - return -EREMOTEIO; - dprintk("%s reply is 0x%x\n", __FUNCTION__, ret[0]); - if (dst_debug && dst_verbose) { + if (cnt >= 2) { + if (verbose > 1) + printk("%s: RDC 8820 RESET...\n", __FUNCTION__); + dst_error_bailout(state); + + return -1; + } + if (debug && (verbose > 4)) { + dprintk("%s reply is 0x%x\n", __FUNCTION__, ret[0]); for (err = 1; err < len; err++) dprintk(" 0x%x", ret[err]); if (err > 1) dprintk("\n"); } + return 0; } +EXPORT_SYMBOL(read_dst); static int dst_set_freq(struct dst_state *state, u32 freq) { u8 *val; state->frequency = freq; + if (debug > 4) + dprintk("%s: set Frequency %u\n", __FUNCTION__, freq); - // dprintk("%s: set frequency %u\n", __FUNCTION__, freq); if (state->dst_type == DST_TYPE_IS_SAT) { freq = freq / 1000; if (freq < 950 || freq > 2150) @@ -398,7 +450,8 @@ static int dst_set_symbolrate(struct dst_state* state, u32 srate) if (state->dst_type == DST_TYPE_IS_TERR) { return 0; } - // dprintk("%s: set srate %u\n", __FUNCTION__, srate); + if (debug > 4) + dprintk("%s: set symrate %u\n", __FUNCTION__, srate); srate /= 1000; val = &state->tx_tuna[0]; @@ -407,7 +460,10 @@ static int dst_set_symbolrate(struct dst_state* state, u32 srate) sval <<= 20; do_div(sval, 88000); symcalc = (u32) sval; - // dprintk("%s: set symcalc %u\n", __FUNCTION__, symcalc); + + if (debug > 4) + dprintk("%s: set symcalc %u\n", __FUNCTION__, symcalc); + val[5] = (u8) (symcalc >> 12); val[6] = (u8) (symcalc >> 4); val[7] = (u8) (symcalc << 4); @@ -422,7 +478,7 @@ static int dst_set_symbolrate(struct dst_state* state, u32 srate) return 0; } -static u8 dst_check_sum(u8 * buf, u32 len) +u8 dst_check_sum(u8 * buf, u32 len) { u32 i; u8 val = 0; @@ -433,28 +489,7 @@ static u8 dst_check_sum(u8 * buf, u32 len) } return ((~val) + 1); } - -struct dst_types { - char *mstr; - int offs; - u8 dst_type; - u32 type_flags; -}; - -static struct dst_types dst_tlist[] = { - {"DST-020", 0, DST_TYPE_IS_SAT, DST_TYPE_HAS_SYMDIV}, - {"DST-030", 0, DST_TYPE_IS_SAT, DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE}, - {"DST-03T", 0, DST_TYPE_IS_SAT, DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_TS204}, - {"DST-MOT", 0, DST_TYPE_IS_SAT, DST_TYPE_HAS_SYMDIV}, - {"DST-CI", 1, DST_TYPE_IS_SAT, DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE}, - {"DSTMCI", 1, DST_TYPE_IS_SAT, DST_TYPE_HAS_NEWTUNE}, - {"DSTFCI", 1, DST_TYPE_IS_SAT, DST_TYPE_HAS_NEWTUNE}, - {"DCTNEW", 1, DST_TYPE_IS_CABLE, DST_TYPE_HAS_NEWTUNE}, - {"DCT-CI", 1, DST_TYPE_IS_CABLE, DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_TS204}, - {"DTTDIG", 1, DST_TYPE_IS_TERR, 0} -}; - -/* DCTNEW and DCT-CI are guesses */ +EXPORT_SYMBOL(dst_check_sum); static void dst_type_flags_print(u32 type_flags) { @@ -465,93 +500,270 @@ static void dst_type_flags_print(u32 type_flags) printk(" 0x%x ts204", DST_TYPE_HAS_TS204); if (type_flags & DST_TYPE_HAS_SYMDIV) printk(" 0x%x symdiv", DST_TYPE_HAS_SYMDIV); + if (type_flags & DST_TYPE_HAS_FW_1) + printk(" 0x%x firmware version = 1", DST_TYPE_HAS_FW_1); + if (type_flags & DST_TYPE_HAS_FW_2) + printk(" 0x%x firmware version = 2", DST_TYPE_HAS_FW_2); + if (type_flags & DST_TYPE_HAS_FW_3) + printk(" 0x%x firmware version = 3", DST_TYPE_HAS_FW_3); +// if ((type_flags & DST_TYPE_HAS_FW_BUILD) && new_fw) + printk("\n"); } -static int dst_type_print(u8 type) + +static int dst_type_print (u8 type) { char *otype; switch (type) { case DST_TYPE_IS_SAT: otype = "satellite"; break; + case DST_TYPE_IS_TERR: otype = "terrestrial"; break; + case DST_TYPE_IS_CABLE: otype = "cable"; break; + default: printk("%s: invalid dst type %d\n", __FUNCTION__, type); return -EINVAL; } printk("DST type : %s\n", otype); + return 0; } -static int dst_check_ci(struct dst_state *state) +/* + Known cards list + Satellite + ------------------- + 200103A + VP-1020 DST-MOT LG(old), TS=188 + + VP-1020 DST-03T LG(new), TS=204 + VP-1022 DST-03T LG(new), TS=204 + VP-1025 DST-03T LG(new), TS=204 + + VP-1030 DSTMCI, LG(new), TS=188 + VP-1032 DSTMCI, LG(new), TS=188 + + Cable + ------------------- + VP-2030 DCT-CI, Samsung, TS=204 + VP-2021 DCT-CI, Unknown, TS=204 + VP-2031 DCT-CI, Philips, TS=188 + VP-2040 DCT-CI, Philips, TS=188, with CA daughter board + VP-2040 DCT-CI, Philips, TS=204, without CA daughter board + + Terrestrial + ------------------- + VP-3050 DTTNXT TS=188 + VP-3040 DTT-CI, Philips, TS=188 + VP-3040 DTT-CI, Philips, TS=204 + + ATSC + ------------------- + VP-3220 ATSCDI, TS=188 + VP-3250 ATSCAD, TS=188 + +*/ + +struct dst_types dst_tlist[] = { + { + .device_id = "200103A", + .offset = 0, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1, + .dst_feature = 0 + }, /* obsolete */ + + { + .device_id = "DST-020", + .offset = 0, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1, + .dst_feature = 0 + }, /* obsolete */ + + { + .device_id = "DST-030", + .offset = 0, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1, + .dst_feature = 0 + }, /* obsolete */ + + { + .device_id = "DST-03T", + .offset = 0, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_TS204 | DST_TYPE_HAS_FW_2, + .dst_feature = DST_TYPE_HAS_DISEQC3 | DST_TYPE_HAS_DISEQC4 | DST_TYPE_HAS_DISEQC5 + | DST_TYPE_HAS_MAC | DST_TYPE_HAS_MOTO + }, + + { + .device_id = "DST-MOT", + .offset = 0, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1, + .dst_feature = 0 + }, /* obsolete */ + + { + .device_id = "DST-CI", + .offset = 1, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1, + .dst_feature = DST_TYPE_HAS_CA + }, /* An OEM board */ + + { + .device_id = "DSTMCI", + .offset = 1, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD, + .dst_feature = DST_TYPE_HAS_CA | DST_TYPE_HAS_DISEQC3 | DST_TYPE_HAS_DISEQC4 + | DST_TYPE_HAS_MOTO | DST_TYPE_HAS_MAC + }, + + { + .device_id = "DSTFCI", + .offset = 1, + .dst_type = DST_TYPE_IS_SAT, + .type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1, + .dst_feature = 0 + }, /* unknown to vendor */ + + { + .device_id = "DCT-CI", + .offset = 1, + .dst_type = DST_TYPE_IS_CABLE, + .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_1 + | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD, + .dst_feature = DST_TYPE_HAS_CA + }, + + { + .device_id = "DCTNEW", + .offset = 1, + .dst_type = DST_TYPE_IS_CABLE, + .type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_3, + .dst_feature = 0 + }, + + { + .device_id = "DTT-CI", + .offset = 1, + .dst_type = DST_TYPE_IS_TERR, + .type_flags = DST_TYPE_HAS_TS204 | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD, + .dst_feature = 0 + }, + + { + .device_id = "DTTDIG", + .offset = 1, + .dst_type = DST_TYPE_IS_TERR, + .type_flags = DST_TYPE_HAS_FW_2, + .dst_feature = 0 + }, + + { + .device_id = "DTTNXT", + .offset = 1, + .dst_type = DST_TYPE_IS_TERR, + .type_flags = DST_TYPE_HAS_FW_2, + .dst_feature = DST_TYPE_HAS_ANALOG + }, + + { + .device_id = "ATSCDI", + .offset = 1, + .dst_type = DST_TYPE_IS_ATSC, + .type_flags = DST_TYPE_HAS_FW_2, + .dst_feature = 0 + }, + + { + .device_id = "ATSCAD", + .offset = 1, + .dst_type = DST_TYPE_IS_ATSC, + .type_flags = DST_TYPE_HAS_FW_2, + .dst_feature = 0 + }, + + { } + +}; + + +static int dst_get_device_id(struct dst_state *state) { - u8 txbuf[8]; - u8 rxbuf[8]; - int retval; + u8 reply; + int i; - struct dst_types *dsp; - u8 use_dst_type; - u32 use_type_flags; + struct dst_types *p_dst_type; + u8 use_dst_type = 0; + u32 use_type_flags = 0; - memset(txbuf, 0, sizeof(txbuf)); - txbuf[1] = 6; - txbuf[7] = dst_check_sum(txbuf, 7); + static u8 device_type[8] = {0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff}; - dst_i2c_enable(state); - dst_reset8820(state); - retval = write_dst(state, txbuf, 8); - if (retval < 0) { - dst_i2c_disable(state); - dprintk("%s: write not successful, maybe no card?\n", __FUNCTION__); - return retval; - } - msleep(3); - retval = read_dst(state, rxbuf, 1); - dst_i2c_disable(state); - if (retval < 0) { - dprintk("%s: read not successful, maybe no card?\n", __FUNCTION__); - return retval; - } - if (rxbuf[0] != 0xff) { - dprintk("%s: write reply not 0xff, not ci (%02x)\n", __FUNCTION__, rxbuf[0]); - return retval; - } - if (!dst_wait_dst_ready(state)) - return 0; - // dst_i2c_enable(i2c); Dimitri - retval = read_dst(state, rxbuf, 8); - dst_i2c_disable(state); - if (retval < 0) { - dprintk("%s: read not successful\n", __FUNCTION__); - return retval; + device_type[7] = dst_check_sum(device_type, 7); + + if (write_dst(state, device_type, FIXED_COMM)) + return -1; /* Write failed */ + + if ((dst_pio_disable(state)) < 0) + return -1; + + if (read_dst(state, &reply, GET_ACK)) + return -1; /* Read failure */ + + if (reply != ACK) { + dprintk("%s: Write not Acknowledged! [Reply=0x%02x]\n", __FUNCTION__, reply); + return -1; /* Unack'd write */ } - if (rxbuf[7] != dst_check_sum(rxbuf, 7)) { - dprintk("%s: checksum failure\n", __FUNCTION__); - return retval; + + if (!dst_wait_dst_ready(state, DEVICE_INIT)) + return -1; /* DST not ready yet */ + + if (read_dst(state, state->rxbuffer, FIXED_COMM)) + return -1; + + dst_pio_disable(state); + + if (state->rxbuffer[7] != dst_check_sum(state->rxbuffer, 7)) { + dprintk("%s: Checksum failure! \n", __FUNCTION__); + return -1; /* Checksum failure */ } - rxbuf[7] = '\0'; - for (i = 0, dsp = &dst_tlist[0]; i < sizeof(dst_tlist) / sizeof(dst_tlist[0]); i++, dsp++) { - if (!strncmp(&rxbuf[dsp->offs], dsp->mstr, strlen(dsp->mstr))) { - use_type_flags = dsp->type_flags; - use_dst_type = dsp->dst_type; - printk("%s: recognize %s\n", __FUNCTION__, dsp->mstr); + + state->rxbuffer[7] = '\0'; + + for (i = 0, p_dst_type = dst_tlist; i < ARRAY_SIZE (dst_tlist); i++, p_dst_type++) { + if (!strncmp (&state->rxbuffer[p_dst_type->offset], p_dst_type->device_id, strlen (p_dst_type->device_id))) { + use_type_flags = p_dst_type->type_flags; + use_dst_type = p_dst_type->dst_type; + + /* Card capabilities */ + state->dst_hw_cap = p_dst_type->dst_feature; + printk ("%s: Recognise [%s]\n", __FUNCTION__, p_dst_type->device_id); + break; } } - if (i >= sizeof(dst_tlist) / sizeof(dst_tlist[0])) { - printk("%s: unable to recognize %s or %s\n", __FUNCTION__, &rxbuf[0], &rxbuf[1]); - printk("%s please email linux-dvb@linuxtv.org with this type in\n", __FUNCTION__); + + if (i >= sizeof (dst_tlist) / sizeof (dst_tlist [0])) { + printk("%s: Unable to recognize %s or %s\n", __FUNCTION__, &state->rxbuffer[0], &state->rxbuffer[1]); + printk("%s: please email linux-dvb@linuxtv.org with this type in\n", __FUNCTION__); use_dst_type = DST_TYPE_IS_SAT; use_type_flags = DST_TYPE_HAS_SYMDIV; } - dst_type_print(use_dst_type); + dst_type_print(use_dst_type); state->type_flags = use_type_flags; state->dst_type = use_dst_type; dst_type_flags_print(state->type_flags); @@ -559,50 +771,102 @@ static int dst_check_ci(struct dst_state *state) if (state->type_flags & DST_TYPE_HAS_TS204) { dst_packsize(state, 204); } + return 0; } -static int dst_command(struct dst_state* state, u8 * data, u8 len) +static int dst_probe(struct dst_state *state) +{ + if ((rdc_8820_reset(state)) < 0) { + dprintk("%s: RDC 8820 RESET Failed.\n", __FUNCTION__); + return -1; + } + if (dst_addons & DST_TYPE_HAS_CA) + msleep(4000); + else + msleep(100); + + if ((dst_comm_init(state)) < 0) { + dprintk("%s: DST Initialization Failed.\n", __FUNCTION__); + return -1; + } + msleep(100); + if (dst_get_device_id(state) < 0) { + dprintk("%s: unknown device.\n", __FUNCTION__); + return -1; + } + + return 0; +} + +int dst_command(struct dst_state* state, u8 * data, u8 len) { - int retval; u8 reply; + if ((dst_comm_init(state)) < 0) { + dprintk("%s: DST Communication Initialization Failed.\n", __FUNCTION__); + return -1; + } - dst_i2c_enable(state); - dst_reset8820(state); - retval = write_dst(state, data, len); - if (retval < 0) { - dst_i2c_disable(state); - dprintk("%s: write not successful\n", __FUNCTION__); - return retval; + if (write_dst(state, data, len)) { + if (verbose > 1) + dprintk("%s: Tring to recover.. \n", __FUNCTION__); + if ((dst_error_recovery(state)) < 0) { + dprintk("%s: Recovery Failed.\n", __FUNCTION__); + return -1; + } + return -1; } - msleep(33); - retval = read_dst(state, &reply, 1); - dst_i2c_disable(state); - if (retval < 0) { - dprintk("%s: read verify not successful\n", __FUNCTION__); - return retval; + if ((dst_pio_disable(state)) < 0) { + dprintk("%s: PIO Disable Failed.\n", __FUNCTION__); + return -1; } - if (reply != 0xff) { - dprintk("%s: write reply not 0xff 0x%02x \n", __FUNCTION__, reply); - return 0; + if (state->type_flags & DST_TYPE_HAS_FW_1) + udelay(3000); + + if (read_dst(state, &reply, GET_ACK)) { + if (verbose > 1) + dprintk("%s: Trying to recover.. \n", __FUNCTION__); + if ((dst_error_recovery(state)) < 0) { + dprintk("%s: Recovery Failed.\n", __FUNCTION__); + return -1; + } + return -1; + } + + if (reply != ACK) { + dprintk("%s: write not acknowledged 0x%02x \n", __FUNCTION__, reply); + return -1; } if (len >= 2 && data[0] == 0 && (data[1] == 1 || data[1] == 3)) return 0; - if (!dst_wait_dst_ready(state)) - return 0; - // dst_i2c_enable(i2c); Per dimitri - retval = read_dst(state, state->rxbuffer, 8); - dst_i2c_disable(state); - if (retval < 0) { - dprintk("%s: read not successful\n", __FUNCTION__); - return 0; + +// udelay(3000); + if (state->type_flags & DST_TYPE_HAS_FW_1) + udelay(3000); + else + udelay(2000); + + if (!dst_wait_dst_ready(state, NO_DELAY)) + return -1; + + if (read_dst(state, state->rxbuffer, FIXED_COMM)) { + if (verbose > 1) + dprintk("%s: Trying to recover.. \n", __FUNCTION__); + if ((dst_error_recovery(state)) < 0) { + dprintk("%s: Recovery failed.\n", __FUNCTION__); + return -1; + } + return -1; } + if (state->rxbuffer[7] != dst_check_sum(state->rxbuffer, 7)) { dprintk("%s: checksum failure\n", __FUNCTION__); - return 0; + return -1; } + return 0; } +EXPORT_SYMBOL(dst_command); static int dst_get_signal(struct dst_state* state) { @@ -642,37 +906,38 @@ static int dst_tone_power_cmd(struct dst_state* state) if (state->dst_type == DST_TYPE_IS_TERR) return 0; - if (state->voltage == SEC_VOLTAGE_OFF) - paket[4] = 0; - else - paket[4] = 1; - if (state->tone == SEC_TONE_ON) - paket[2] = state->k22; - else - paket[2] = 0; - paket[7] = dst_check_sum(&paket[0], 7); + paket[4] = state->tx_tuna[4]; + paket[2] = state->tx_tuna[2]; + paket[3] = state->tx_tuna[3]; + paket[7] = dst_check_sum (paket, 7); dst_command(state, paket, 8); + return 0; } static int dst_get_tuna(struct dst_state* state) { int retval; + if ((state->diseq_flags & ATTEMPT_TUNE) == 0) return 0; + state->diseq_flags &= ~(HAS_LOCK); - if (!dst_wait_dst_ready(state)) + if (!dst_wait_dst_ready(state, NO_DELAY)) return 0; + if (state->type_flags & DST_TYPE_HAS_NEWTUNE) { /* how to get variable length reply ???? */ retval = read_dst(state, state->rx_tuna, 10); } else { - retval = read_dst(state, &state->rx_tuna[2], 8); + retval = read_dst(state, &state->rx_tuna[2], FIXED_COMM); } + if (retval < 0) { dprintk("%s: read not successful\n", __FUNCTION__); return 0; } + if (state->type_flags & DST_TYPE_HAS_NEWTUNE) { if (state->rx_tuna[9] != dst_check_sum(&state->rx_tuna[0], 9)) { dprintk("%s: checksum failure?\n", __FUNCTION__); @@ -705,11 +970,13 @@ static int dst_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage); static int dst_write_tuna(struct dvb_frontend* fe) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; int retval; u8 reply; - dprintk("%s: type_flags 0x%x \n", __FUNCTION__, state->type_flags); + if (debug > 4) + dprintk("%s: type_flags 0x%x \n", __FUNCTION__, state->type_flags); + state->decode_freq = 0; state->decode_lock = state->decode_strength = state->decode_snr = 0; if (state->dst_type == DST_TYPE_IS_SAT) { @@ -717,32 +984,41 @@ static int dst_write_tuna(struct dvb_frontend* fe) dst_set_voltage(fe, SEC_VOLTAGE_13); } state->diseq_flags &= ~(HAS_LOCK | ATTEMPT_TUNE); - dst_i2c_enable(state); + + if ((dst_comm_init(state)) < 0) { + dprintk("%s: DST Communication initialization failed.\n", __FUNCTION__); + return -1; + } + if (state->type_flags & DST_TYPE_HAS_NEWTUNE) { - dst_reset8820(state); state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[0], 9); retval = write_dst(state, &state->tx_tuna[0], 10); + } else { state->tx_tuna[9] = dst_check_sum(&state->tx_tuna[2], 7); - retval = write_dst(state, &state->tx_tuna[2], 8); + retval = write_dst(state, &state->tx_tuna[2], FIXED_COMM); } if (retval < 0) { - dst_i2c_disable(state); + dst_pio_disable(state); dprintk("%s: write not successful\n", __FUNCTION__); return retval; } - msleep(3); - retval = read_dst(state, &reply, 1); - dst_i2c_disable(state); - if (retval < 0) { - dprintk("%s: read verify not successful\n", __FUNCTION__); - return retval; + + if ((dst_pio_disable(state)) < 0) { + dprintk("%s: DST PIO disable failed !\n", __FUNCTION__); + return -1; } - if (reply != 0xff) { - dprintk("%s: write reply not 0xff 0x%02x \n", __FUNCTION__, reply); + + if ((read_dst(state, &reply, GET_ACK) < 0)) { + dprintk("%s: read verify not successful.\n", __FUNCTION__); + return -1; + } + if (reply != ACK) { + dprintk("%s: write not acknowledged 0x%02x \n", __FUNCTION__, reply); return 0; } state->diseq_flags |= ATTEMPT_TUNE; + return dst_get_tuna(state); } @@ -762,10 +1038,10 @@ static int dst_write_tuna(struct dvb_frontend* fe) static int dst_set_diseqc(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; u8 paket[8] = { 0x00, 0x08, 0x04, 0xe0, 0x10, 0x38, 0xf0, 0xec }; - if (state->dst_type == DST_TYPE_IS_TERR) + if (state->dst_type != DST_TYPE_IS_SAT) return 0; if (cmd->msg_len == 0 || cmd->msg_len > 4) @@ -778,73 +1054,91 @@ static int dst_set_diseqc(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* static int dst_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) { - u8 *val; int need_cmd; - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; state->voltage = voltage; - if (state->dst_type == DST_TYPE_IS_TERR) + if (state->dst_type != DST_TYPE_IS_SAT) return 0; need_cmd = 0; - val = &state->tx_tuna[0]; - val[8] &= ~0x40; switch (voltage) { - case SEC_VOLTAGE_13: - if ((state->diseq_flags & HAS_POWER) == 0) - need_cmd = 1; - state->diseq_flags |= HAS_POWER; - break; - case SEC_VOLTAGE_18: - if ((state->diseq_flags & HAS_POWER) == 0) + case SEC_VOLTAGE_13: + case SEC_VOLTAGE_18: + if ((state->diseq_flags & HAS_POWER) == 0) + need_cmd = 1; + state->diseq_flags |= HAS_POWER; + state->tx_tuna[4] = 0x01; + break; + + case SEC_VOLTAGE_OFF: need_cmd = 1; - state->diseq_flags |= HAS_POWER; - val[8] |= 0x40; - break; - case SEC_VOLTAGE_OFF: - need_cmd = 1; - state->diseq_flags &= ~(HAS_POWER | HAS_LOCK | ATTEMPT_TUNE); - break; - default: - return -EINVAL; + state->diseq_flags &= ~(HAS_POWER | HAS_LOCK | ATTEMPT_TUNE); + state->tx_tuna[4] = 0x00; + break; + + default: + return -EINVAL; } - if (need_cmd) { + if (need_cmd) dst_tone_power_cmd(state); - } + return 0; } static int dst_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) { - u8 *val; - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; state->tone = tone; - if (state->dst_type == DST_TYPE_IS_TERR) + if (state->dst_type != DST_TYPE_IS_SAT) return 0; - val = &state->tx_tuna[0]; + switch (tone) { + case SEC_TONE_OFF: + state->tx_tuna[2] = 0xff; + break; - val[8] &= ~0x1; + case SEC_TONE_ON: + state->tx_tuna[2] = 0x02; + break; - switch (tone) { - case SEC_TONE_OFF: - break; - case SEC_TONE_ON: - val[8] |= 1; - break; - default: - return -EINVAL; + default: + return -EINVAL; } dst_tone_power_cmd(state); + + return 0; +} + +static int dst_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t minicmd) +{ + struct dst_state *state = fe->demodulator_priv; + + if (state->dst_type != DST_TYPE_IS_SAT) + return 0; + + state->minicmd = minicmd; + + switch (minicmd) { + case SEC_MINI_A: + state->tx_tuna[3] = 0x02; + break; + case SEC_MINI_B: + state->tx_tuna[3] = 0xff; + break; + } + dst_tone_power_cmd(state); + return 0; } + static int dst_init(struct dvb_frontend* fe) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; static u8 ini_satci_tuna[] = { 9, 0, 3, 0xb6, 1, 0, 0x73, 0x21, 0, 0 }; static u8 ini_satfta_tuna[] = { 0, 0, 3, 0xb6, 1, 0x55, 0xbd, 0x50, 0, 0 }; static u8 ini_tvfta_tuna[] = { 0, 0, 3, 0xb6, 1, 7, 0x0, 0x0, 0, 0 }; @@ -876,7 +1170,7 @@ static int dst_init(struct dvb_frontend* fe) static int dst_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; *status = 0; if (state->diseq_flags & HAS_LOCK) { @@ -890,7 +1184,7 @@ static int dst_read_status(struct dvb_frontend* fe, fe_status_t* status) static int dst_read_signal_strength(struct dvb_frontend* fe, u16* strength) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; dst_get_signal(state); *strength = state->decode_strength; @@ -900,7 +1194,7 @@ static int dst_read_signal_strength(struct dvb_frontend* fe, u16* strength) static int dst_read_snr(struct dvb_frontend* fe, u16* snr) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; dst_get_signal(state); *snr = state->decode_snr; @@ -910,13 +1204,19 @@ static int dst_read_snr(struct dvb_frontend* fe, u16* snr) static int dst_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; dst_set_freq(state, p->frequency); + if (verbose > 4) + dprintk("Set Frequency = [%d]\n", p->frequency); + dst_set_inversion(state, p->inversion); if (state->dst_type == DST_TYPE_IS_SAT) { dst_set_fec(state, p->u.qpsk.fec_inner); dst_set_symbolrate(state, p->u.qpsk.symbol_rate); + if (verbose > 4) + dprintk("Set Symbolrate = [%d]\n", p->u.qpsk.symbol_rate); + } else if (state->dst_type == DST_TYPE_IS_TERR) { dst_set_bandwidth(state, p->u.ofdm.bandwidth); } else if (state->dst_type == DST_TYPE_IS_CABLE) { @@ -930,7 +1230,7 @@ static int dst_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_paramet static int dst_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; p->frequency = state->decode_freq; p->inversion = state->inversion; @@ -950,7 +1250,7 @@ static int dst_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_paramet static void dst_release(struct dvb_frontend* fe) { - struct dst_state* state = (struct dst_state*) fe->demodulator_priv; + struct dst_state* state = fe->demodulator_priv; kfree(state); } @@ -958,50 +1258,47 @@ static struct dvb_frontend_ops dst_dvbt_ops; static struct dvb_frontend_ops dst_dvbs_ops; static struct dvb_frontend_ops dst_dvbc_ops; -struct dvb_frontend* dst_attach(const struct dst_config* config, - struct i2c_adapter* i2c, - struct bt878 *bt) +struct dst_state* dst_attach(struct dst_state *state, struct dvb_adapter *dvb_adapter) { - struct dst_state* state = NULL; - - /* allocate memory for the internal state */ - state = (struct dst_state*) kmalloc(sizeof(struct dst_state), GFP_KERNEL); - if (state == NULL) goto error; - /* setup the state */ - state->config = config; - state->i2c = i2c; - state->bt = bt; - - /* check if the demod is there */ - if (dst_check_ci(state) < 0) goto error; + /* check if the ASIC is there */ + if (dst_probe(state) < 0) { + if (state) + kfree(state); + return NULL; + } /* determine settings based on type */ switch (state->dst_type) { case DST_TYPE_IS_TERR: memcpy(&state->ops, &dst_dvbt_ops, sizeof(struct dvb_frontend_ops)); break; + case DST_TYPE_IS_CABLE: memcpy(&state->ops, &dst_dvbc_ops, sizeof(struct dvb_frontend_ops)); break; + case DST_TYPE_IS_SAT: memcpy(&state->ops, &dst_dvbs_ops, sizeof(struct dvb_frontend_ops)); break; + default: - printk("dst: unknown frontend type. please report to the LinuxTV.org DVB mailinglist.\n"); - goto error; + printk("%s: unknown DST type. please report to the LinuxTV.org DVB mailinglist.\n", __FUNCTION__); + if (state) + kfree(state); + + return NULL; } /* create dvb_frontend */ state->frontend.ops = &state->ops; state->frontend.demodulator_priv = state; - return &state->frontend; -error: - kfree(state); - return NULL; + return state; /* Manu (DST is a card not a frontend) */ } +EXPORT_SYMBOL(dst_attach); + static struct dvb_frontend_ops dst_dvbt_ops = { .info = { @@ -1051,6 +1348,7 @@ static struct dvb_frontend_ops dst_dvbs_ops = { .read_signal_strength = dst_read_signal_strength, .read_snr = dst_read_snr, + .diseqc_send_burst = dst_send_burst, .diseqc_send_master_cmd = dst_set_diseqc, .set_voltage = dst_set_voltage, .set_tone = dst_set_tone, @@ -1082,8 +1380,7 @@ static struct dvb_frontend_ops dst_dvbc_ops = { .read_snr = dst_read_snr, }; + MODULE_DESCRIPTION("DST DVB-S/T/C Combo Frontend driver"); -MODULE_AUTHOR("Jamie Honan"); +MODULE_AUTHOR("Jamie Honan, Manu Abraham"); MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(dst_attach); diff --git a/drivers/media/dvb/bt8xx/dst.h b/drivers/media/dvb/bt8xx/dst.h deleted file mode 100644 index bcb418c5c12..00000000000 --- a/drivers/media/dvb/bt8xx/dst.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - Frontend-driver for TwinHan DST Frontend - - Copyright (C) 2003 Jamie Honan - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -*/ - -#ifndef DST_H -#define DST_H - -#include <linux/dvb/frontend.h> -#include <linux/device.h> -#include "bt878.h" - -struct dst_config -{ - /* the demodulator's i2c address */ - u8 demod_address; -}; - -extern struct dvb_frontend* dst_attach(const struct dst_config* config, - struct i2c_adapter* i2c, - struct bt878 *bt); - -#endif // DST_H diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c new file mode 100644 index 00000000000..d781504cc2f --- /dev/null +++ b/drivers/media/dvb/bt8xx/dst_ca.c @@ -0,0 +1,861 @@ +/* + CA-driver for TwinHan DST Frontend/Card + + Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + + + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/string.h> + +#include <linux/dvb/ca.h> +#include "dvbdev.h" +#include "dvb_frontend.h" + +#include "dst_ca.h" +#include "dst_common.h" + +static unsigned int verbose = 1; +module_param(verbose, int, 0644); +MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)"); + +static unsigned int debug = 1; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "debug messages, default is 1 (yes)"); + +#define dprintk if (debug) printk + +/* Need some more work */ +static int ca_set_slot_descr(void) +{ + /* We could make this more graceful ? */ + return -EOPNOTSUPP; +} + +/* Need some more work */ +static int ca_set_pid(void) +{ + /* We could make this more graceful ? */ + return -EOPNOTSUPP; +} + + +static int put_checksum(u8 *check_string, int length) +{ + u8 i = 0, checksum = 0; + + if (verbose > 3) { + dprintk("%s: ========================= Checksum calculation ===========================\n", __FUNCTION__); + dprintk("%s: String Length=[0x%02x]\n", __FUNCTION__, length); + + dprintk("%s: String=[", __FUNCTION__); + } + while (i < length) { + if (verbose > 3) + dprintk(" %02x", check_string[i]); + checksum += check_string[i]; + i++; + } + if (verbose > 3) { + dprintk(" ]\n"); + dprintk("%s: Sum=[%02x]\n", __FUNCTION__, checksum); + } + check_string[length] = ~checksum + 1; + if (verbose > 3) { + dprintk("%s: Checksum=[%02x]\n", __FUNCTION__, check_string[length]); + dprintk("%s: ==========================================================================\n", __FUNCTION__); + } + + return 0; +} + +static int dst_ci_command(struct dst_state* state, u8 * data, u8 *ca_string, u8 len, int read) +{ + u8 reply; + + dst_comm_init(state); + msleep(65); + + if (write_dst(state, data, len)) { + dprintk("%s: Write not successful, trying to recover\n", __FUNCTION__); + dst_error_recovery(state); + return -1; + } + + if ((dst_pio_disable(state)) < 0) { + dprintk("%s: DST PIO disable failed.\n", __FUNCTION__); + return -1; + } + + if (read_dst(state, &reply, GET_ACK) < 0) { + dprintk("%s: Read not successful, trying to recover\n", __FUNCTION__); + dst_error_recovery(state); + return -1; + } + + if (read) { + if (! dst_wait_dst_ready(state, LONG_DELAY)) { + dprintk("%s: 8820 not ready\n", __FUNCTION__); + return -1; + } + + if (read_dst(state, ca_string, 128) < 0) { /* Try to make this dynamic */ + dprintk("%s: Read not successful, trying to recover\n", __FUNCTION__); + dst_error_recovery(state); + return -1; + } + } + + return 0; +} + + +static int dst_put_ci(struct dst_state *state, u8 *data, int len, u8 *ca_string, int read) +{ + u8 dst_ca_comm_err = 0; + + while (dst_ca_comm_err < RETRIES) { + dst_comm_init(state); + if (verbose > 2) + dprintk("%s: Put Command\n", __FUNCTION__); + if (dst_ci_command(state, data, ca_string, len, read)) { // If error + dst_error_recovery(state); + dst_ca_comm_err++; // work required here. + } + break; + } + + return 0; +} + + + +static int ca_get_app_info(struct dst_state *state) +{ + static u8 command[8] = {0x07, 0x40, 0x01, 0x00, 0x01, 0x00, 0x00, 0xff}; + + put_checksum(&command[0], command[0]); + if ((dst_put_ci(state, command, sizeof(command), state->messages, GET_REPLY)) < 0) { + dprintk("%s: -->dst_put_ci FAILED !\n", __FUNCTION__); + return -1; + } + if (verbose > 1) { + dprintk("%s: -->dst_put_ci SUCCESS !\n", __FUNCTION__); + + dprintk("%s: ================================ CI Module Application Info ======================================\n", __FUNCTION__); + dprintk("%s: Application Type=[%d], Application Vendor=[%d], Vendor Code=[%d]\n%s: Application info=[%s]\n", + __FUNCTION__, state->messages[7], (state->messages[8] << 8) | state->messages[9], + (state->messages[10] << 8) | state->messages[11], __FUNCTION__, (char *)(&state->messages[12])); + dprintk("%s: ==================================================================================================\n", __FUNCTION__); + } + + return 0; +} + +static int ca_get_slot_caps(struct dst_state *state, struct ca_caps *p_ca_caps, void *arg) +{ + int i; + u8 slot_cap[256]; + static u8 slot_command[8] = {0x07, 0x40, 0x02, 0x00, 0x02, 0x00, 0x00, 0xff}; + + put_checksum(&slot_command[0], slot_command[0]); + if ((dst_put_ci(state, slot_command, sizeof (slot_command), slot_cap, GET_REPLY)) < 0) { + dprintk("%s: -->dst_put_ci FAILED !\n", __FUNCTION__); + return -1; + } + if (verbose > 1) + dprintk("%s: -->dst_put_ci SUCCESS !\n", __FUNCTION__); + + /* Will implement the rest soon */ + + if (verbose > 1) { + dprintk("%s: Slot cap = [%d]\n", __FUNCTION__, slot_cap[7]); + dprintk("===================================\n"); + for (i = 0; i < 8; i++) + dprintk(" %d", slot_cap[i]); + dprintk("\n"); + } + + p_ca_caps->slot_num = 1; + p_ca_caps->slot_type = 1; + p_ca_caps->descr_num = slot_cap[7]; + p_ca_caps->descr_type = 1; + + + if (copy_to_user((struct ca_caps *)arg, p_ca_caps, sizeof (struct ca_caps))) { + return -EFAULT; + } + + return 0; +} + +/* Need some more work */ +static int ca_get_slot_descr(struct dst_state *state, struct ca_msg *p_ca_message, void *arg) +{ + return -EOPNOTSUPP; +} + + +static int ca_get_slot_info(struct dst_state *state, struct ca_slot_info *p_ca_slot_info, void *arg) +{ + int i; + static u8 slot_command[8] = {0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff}; + + u8 *slot_info = state->rxbuffer; + + put_checksum(&slot_command[0], 7); + if ((dst_put_ci(state, slot_command, sizeof (slot_command), slot_info, GET_REPLY)) < 0) { + dprintk("%s: -->dst_put_ci FAILED !\n", __FUNCTION__); + return -1; + } + if (verbose > 1) + dprintk("%s: -->dst_put_ci SUCCESS !\n", __FUNCTION__); + + /* Will implement the rest soon */ + + if (verbose > 1) { + dprintk("%s: Slot info = [%d]\n", __FUNCTION__, slot_info[3]); + dprintk("===================================\n"); + for (i = 0; i < 8; i++) + dprintk(" %d", slot_info[i]); + dprintk("\n"); + } + + if (slot_info[4] & 0x80) { + p_ca_slot_info->flags = CA_CI_MODULE_PRESENT; + p_ca_slot_info->num = 1; + p_ca_slot_info->type = CA_CI; + } + else if (slot_info[4] & 0x40) { + p_ca_slot_info->flags = CA_CI_MODULE_READY; + p_ca_slot_info->num = 1; + p_ca_slot_info->type = CA_CI; + } + else { + p_ca_slot_info->flags = 0; + } + + if (copy_to_user((struct ca_slot_info *)arg, p_ca_slot_info, sizeof (struct ca_slot_info))) { + return -EFAULT; + } + + return 0; +} + + + + +static int ca_get_message(struct dst_state *state, struct ca_msg *p_ca_message, void *arg) +{ + u8 i = 0; + u32 command = 0; + + if (copy_from_user(p_ca_message, (void *)arg, sizeof (struct ca_msg))) + return -EFAULT; + + + if (p_ca_message->msg) { + if (verbose > 3) + dprintk("Message = [%02x %02x %02x]\n", p_ca_message->msg[0], p_ca_message->msg[1], p_ca_message->msg[2]); + + for (i = 0; i < 3; i++) { + command = command | p_ca_message->msg[i]; + if (i < 2) + command = command << 8; + } + if (verbose > 3) + dprintk("%s:Command=[0x%x]\n", __FUNCTION__, command); + + switch (command) { + case CA_APP_INFO: + memcpy(p_ca_message->msg, state->messages, 128); + if (copy_to_user((void *)arg, p_ca_message, sizeof (struct ca_msg)) ) + return -EFAULT; + break; + } + } + + return 0; +} + +static int handle_en50221_tag(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer) +{ + if (state->dst_hw_cap & DST_TYPE_HAS_SESSION) { + hw_buffer->msg[2] = p_ca_message->msg[1]; /* MSB */ + hw_buffer->msg[3] = p_ca_message->msg[2]; /* LSB */ + } + else { + hw_buffer->msg[2] = 0x03; + hw_buffer->msg[3] = 0x00; + } + return 0; +} + +static int debug_8820_buffer(struct ca_msg *hw_buffer) +{ + unsigned int i; + + dprintk("%s:Debug=[", __FUNCTION__); + for (i = 0; i < (hw_buffer->msg[0] + 1); i++) + dprintk(" %02x", hw_buffer->msg[i]); + dprintk("]\n"); + + return 0; +} + +static int write_to_8820(struct dst_state *state, struct ca_msg *hw_buffer, u8 reply) +{ + if ((dst_put_ci(state, hw_buffer->msg, (hw_buffer->length + 1), hw_buffer->msg, reply)) < 0) { + dprintk("%s: DST-CI Command failed.\n", __FUNCTION__); + dprintk("%s: Resetting DST.\n", __FUNCTION__); + rdc_reset_state(state); + return -1; + } + if (verbose > 2) + dprintk("%s: DST-CI Command succes.\n", __FUNCTION__); + + return 0; +} + + +static int ca_set_pmt(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer, u8 reply, u8 query) +{ + u32 hw_offset, buf_offset, i, k; + u32 program_info_length = 0, es_info_length = 0, length = 0, words = 0; + u8 found_prog_ca_desc = 0, found_stream_ca_desc = 0, error_condition = 0, hw_buffer_length = 0; + + if (verbose > 3) + dprintk("%s, p_ca_message length %d (0x%x)\n", __FUNCTION__,p_ca_message->length,p_ca_message->length ); + + handle_en50221_tag(state, p_ca_message, hw_buffer); /* EN50221 tag */ + + /* Handle the length field (variable) */ + if (!(p_ca_message->msg[3] & 0x80)) { /* Length = 1 */ + length = p_ca_message->msg[3] & 0x7f; + words = 0; /* domi's suggestion */ + } + else { /* Length = words */ + words = p_ca_message->msg[3] & 0x7f; + for (i = 0; i < words; i++) { + length = length << 8; + length = length | p_ca_message->msg[4 + i]; + } + } + if (verbose > 4) { + dprintk("%s:Length=[%d (0x%x)], Words=[%d]\n", __FUNCTION__, length,length, words); + + /* Debug Input string */ + for (i = 0; i < length; i++) + dprintk(" %02x", p_ca_message->msg[i]); + dprintk("]\n"); + } + + hw_offset = 7; + buf_offset = words + 4; + + /* Program Header */ + if (verbose > 4) + dprintk("\n%s:Program Header=[", __FUNCTION__); + for (i = 0; i < 6; i++) { + hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset]; + if (verbose > 4) + dprintk(" %02x", p_ca_message->msg[buf_offset]); + hw_offset++, buf_offset++, hw_buffer_length++; + } + if (verbose > 4) + dprintk("]\n"); + + program_info_length = 0; + program_info_length = (((program_info_length | p_ca_message->msg[words + 8]) & 0x0f) << 8) | p_ca_message->msg[words + 9]; + if (verbose > 4) + dprintk("%s:Program info Length=[%d][%02x], hw_offset=[%d], buf_offset=[%d] \n", + __FUNCTION__, program_info_length, program_info_length, hw_offset, buf_offset); + + if (program_info_length && (program_info_length < 256)) { /* If program_info_length */ + hw_buffer->msg[11] = hw_buffer->msg[11] & 0x0f; /* req only 4 bits */ + hw_buffer->msg[12] = hw_buffer->msg[12] + 1; /* increment! ASIC bug! */ + + if (p_ca_message->msg[buf_offset + 1] == 0x09) { /* Check CA descriptor */ + found_prog_ca_desc = 1; + if (verbose > 4) + dprintk("%s: Found CA descriptor @ Program level\n", __FUNCTION__); + } + + if (found_prog_ca_desc) { /* Command only if CA descriptor */ + hw_buffer->msg[13] = p_ca_message->msg[buf_offset]; /* CA PMT command ID */ + hw_offset++, buf_offset++, hw_buffer_length++; + } + + /* Program descriptors */ + if (verbose > 4) { + dprintk("%s:**********>buf_offset=[%d], hw_offset=[%d]\n", __FUNCTION__, buf_offset, hw_offset); + dprintk("%s:Program descriptors=[", __FUNCTION__); + } + while (program_info_length && !error_condition) { /* Copy prog descriptors */ + if (program_info_length > p_ca_message->length) { /* Error situation */ + dprintk ("%s:\"WARNING\" Length error, line=[%d], prog_info_length=[%d]\n", + __FUNCTION__, __LINE__, program_info_length); + dprintk("%s:\"WARNING\" Bailing out of possible loop\n", __FUNCTION__); + error_condition = 1; + break; + } + + hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset]; + dprintk(" %02x", p_ca_message->msg[buf_offset]); + hw_offset++, buf_offset++, hw_buffer_length++, program_info_length--; + } + if (verbose > 4) { + dprintk("]\n"); + dprintk("%s:**********>buf_offset=[%d], hw_offset=[%d]\n", __FUNCTION__, buf_offset, hw_offset); + } + if (found_prog_ca_desc) { + if (!reply) { + hw_buffer->msg[13] = 0x01; /* OK descrambling */ + if (verbose > 1) + dprintk("CA PMT Command = OK Descrambling\n"); + } + else { + hw_buffer->msg[13] = 0x02; /* Ok MMI */ + if (verbose > 1) + dprintk("CA PMT Command = Ok MMI\n"); + } + if (query) { + hw_buffer->msg[13] = 0x03; /* Query */ + if (verbose > 1) + dprintk("CA PMT Command = CA PMT query\n"); + } + } + } + else { + hw_buffer->msg[11] = hw_buffer->msg[11] & 0xf0; /* Don't write to ASIC */ + hw_buffer->msg[12] = hw_buffer->msg[12] = 0x00; + } + if (verbose > 4) + dprintk("%s:**********>p_ca_message->length=[%d], buf_offset=[%d], hw_offset=[%d]\n", + __FUNCTION__, p_ca_message->length, buf_offset, hw_offset); + + while ((buf_offset < p_ca_message->length) && !error_condition) { + /* Bail out in case of an indefinite loop */ + if ((es_info_length > p_ca_message->length) || (buf_offset > p_ca_message->length)) { + dprintk("%s:\"WARNING\" Length error, line=[%d], prog_info_length=[%d], buf_offset=[%d]\n", + __FUNCTION__, __LINE__, program_info_length, buf_offset); + + dprintk("%s:\"WARNING\" Bailing out of possible loop\n", __FUNCTION__); + error_condition = 1; + break; + } + + /* Stream Header */ + + for (k = 0; k < 5; k++) { + hw_buffer->msg[hw_offset + k] = p_ca_message->msg[buf_offset + k]; + } + + es_info_length = 0; + es_info_length = (es_info_length | (p_ca_message->msg[buf_offset + 3] & 0x0f)) << 8 | p_ca_message->msg[buf_offset + 4]; + + if (verbose > 4) { + dprintk("\n%s:----->Stream header=[%02x %02x %02x %02x %02x]\n", __FUNCTION__, + p_ca_message->msg[buf_offset + 0], p_ca_message->msg[buf_offset + 1], + p_ca_message->msg[buf_offset + 2], p_ca_message->msg[buf_offset + 3], + p_ca_message->msg[buf_offset + 4]); + + dprintk("%s:----->Stream type=[%02x], es length=[%d (0x%x)], Chars=[%02x] [%02x], buf_offset=[%d]\n", __FUNCTION__, + p_ca_message->msg[buf_offset + 0], es_info_length, es_info_length, + p_ca_message->msg[buf_offset + 3], p_ca_message->msg[buf_offset + 4], buf_offset); + } + + hw_buffer->msg[hw_offset + 3] &= 0x0f; /* req only 4 bits */ + + if (found_prog_ca_desc) { + hw_buffer->msg[hw_offset + 3] = 0x00; + hw_buffer->msg[hw_offset + 4] = 0x00; + } + + hw_offset += 5, buf_offset += 5, hw_buffer_length += 5; + + /* Check for CA descriptor */ + if (p_ca_message->msg[buf_offset + 1] == 0x09) { + if (verbose > 4) + dprintk("%s:Found CA descriptor @ Stream level\n", __FUNCTION__); + found_stream_ca_desc = 1; + } + + /* ES descriptors */ + + if (es_info_length && !error_condition && !found_prog_ca_desc && found_stream_ca_desc) { +// if (!ca_pmt_done) { + hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset]; /* CA PMT cmd(es) */ + if (verbose > 4) + printk("%s:----->CA PMT Command ID=[%02x]\n", __FUNCTION__, p_ca_message->msg[buf_offset]); +// hw_offset++, buf_offset++, hw_buffer_length++, es_info_length--, ca_pmt_done = 1; + hw_offset++, buf_offset++, hw_buffer_length++, es_info_length--; +// } + if (verbose > 4) + dprintk("%s:----->ES descriptors=[", __FUNCTION__); + + while (es_info_length && !error_condition) { /* ES descriptors */ + if ((es_info_length > p_ca_message->length) || (buf_offset > p_ca_message->length)) { + if (verbose > 4) { + dprintk("%s:\"WARNING\" ES Length error, line=[%d], es_info_length=[%d], buf_offset=[%d]\n", + __FUNCTION__, __LINE__, es_info_length, buf_offset); + + dprintk("%s:\"WARNING\" Bailing out of possible loop\n", __FUNCTION__); + } + error_condition = 1; + break; + } + + hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset]; + if (verbose > 3) + dprintk("%02x ", hw_buffer->msg[hw_offset]); + hw_offset++, buf_offset++, hw_buffer_length++, es_info_length--; + } + found_stream_ca_desc = 0; /* unset for new streams */ + dprintk("]\n"); + } + } + + /* MCU Magic words */ + + hw_buffer_length += 7; + hw_buffer->msg[0] = hw_buffer_length; + hw_buffer->msg[1] = 64; + hw_buffer->msg[4] = 3; + hw_buffer->msg[5] = hw_buffer->msg[0] - 7; + hw_buffer->msg[6] = 0; + + + /* Fix length */ + hw_buffer->length = hw_buffer->msg[0]; + + put_checksum(&hw_buffer->msg[0], hw_buffer->msg[0]); + /* Do the actual write */ + if (verbose > 4) { + dprintk("%s:======================DEBUGGING================================\n", __FUNCTION__); + dprintk("%s: Actual Length=[%d]\n", __FUNCTION__, hw_buffer_length); + } + /* Only for debugging! */ + if (verbose > 2) + debug_8820_buffer(hw_buffer); + if (verbose > 3) + dprintk("%s: Reply = [%d]\n", __FUNCTION__, reply); + write_to_8820(state, hw_buffer, reply); + + return 0; +} + +/* Board supports CA PMT reply ? */ +static int dst_check_ca_pmt(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer) +{ + int ca_pmt_reply_test = 0; + + /* Do test board */ + /* Not there yet but soon */ + + + /* CA PMT Reply capable */ + if (ca_pmt_reply_test) { + if ((ca_set_pmt(state, p_ca_message, hw_buffer, 1, GET_REPLY)) < 0) { + dprintk("%s: ca_set_pmt.. failed !\n", __FUNCTION__); + return -1; + } + + /* Process CA PMT Reply */ + /* will implement soon */ + dprintk("%s: Not there yet\n", __FUNCTION__); + } + /* CA PMT Reply not capable */ + if (!ca_pmt_reply_test) { + if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, NO_REPLY)) < 0) { + dprintk("%s: ca_set_pmt.. failed !\n", __FUNCTION__); + return -1; + } + if (verbose > 3) + dprintk("%s: ca_set_pmt.. success !\n", __FUNCTION__); + /* put a dummy message */ + + } + return 0; +} + +static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, void *arg) +{ + int i = 0; + unsigned int ca_message_header_len; + + u32 command = 0; + struct ca_msg *hw_buffer; + + if ((hw_buffer = (struct ca_msg *) kmalloc(sizeof (struct ca_msg), GFP_KERNEL)) == NULL) { + printk("%s: Memory allocation failure\n", __FUNCTION__); + return -ENOMEM; + } + if (verbose > 3) + dprintk("%s\n", __FUNCTION__); + + if (copy_from_user(p_ca_message, (void *)arg, sizeof (struct ca_msg))) + return -EFAULT; + + if (p_ca_message->msg) { + ca_message_header_len = p_ca_message->length; /* Restore it back when you are done */ + /* EN50221 tag */ + command = 0; + + for (i = 0; i < 3; i++) { + command = command | p_ca_message->msg[i]; + if (i < 2) + command = command << 8; + } + if (verbose > 3) + dprintk("%s:Command=[0x%x]\n", __FUNCTION__, command); + + switch (command) { + case CA_PMT: + if (verbose > 3) + dprintk("Command = SEND_CA_PMT\n"); + if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, 0)) < 0) { + dprintk("%s: -->CA_PMT Failed !\n", __FUNCTION__); + return -1; + } + if (verbose > 3) + dprintk("%s: -->CA_PMT Success !\n", __FUNCTION__); +// retval = dummy_set_pmt(state, p_ca_message, hw_buffer, 0, 0); + + break; + + case CA_PMT_REPLY: + if (verbose > 3) + dprintk("Command = CA_PMT_REPLY\n"); + /* Have to handle the 2 basic types of cards here */ + if ((dst_check_ca_pmt(state, p_ca_message, hw_buffer)) < 0) { + dprintk("%s: -->CA_PMT_REPLY Failed !\n", __FUNCTION__); + return -1; + } + if (verbose > 3) + dprintk("%s: -->CA_PMT_REPLY Success !\n", __FUNCTION__); + + /* Certain boards do behave different ? */ +// retval = ca_set_pmt(state, p_ca_message, hw_buffer, 1, 1); + + case CA_APP_INFO_ENQUIRY: // only for debugging + if (verbose > 3) + dprintk("%s: Getting Cam Application information\n", __FUNCTION__); + + if ((ca_get_app_info(state)) < 0) { + dprintk("%s: -->CA_APP_INFO_ENQUIRY Failed !\n", __FUNCTION__); + return -1; + } + if (verbose > 3) + printk("%s: -->CA_APP_INFO_ENQUIRY Success !\n", __FUNCTION__); + + break; + } + } + return 0; +} + +static int dst_ca_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) +{ + struct dvb_device* dvbdev = (struct dvb_device*) file->private_data; + struct dst_state* state = (struct dst_state*) dvbdev->priv; + struct ca_slot_info *p_ca_slot_info; + struct ca_caps *p_ca_caps; + struct ca_msg *p_ca_message; + + if ((p_ca_message = (struct ca_msg *) kmalloc(sizeof (struct ca_msg), GFP_KERNEL)) == NULL) { + printk("%s: Memory allocation failure\n", __FUNCTION__); + return -ENOMEM; + } + + if ((p_ca_slot_info = (struct ca_slot_info *) kmalloc(sizeof (struct ca_slot_info), GFP_KERNEL)) == NULL) { + printk("%s: Memory allocation failure\n", __FUNCTION__); + return -ENOMEM; + } + + if ((p_ca_caps = (struct ca_caps *) kmalloc(sizeof (struct ca_caps), GFP_KERNEL)) == NULL) { + printk("%s: Memory allocation failure\n", __FUNCTION__); + return -ENOMEM; + } + + /* We have now only the standard ioctl's, the driver is upposed to handle internals. */ + switch (cmd) { + case CA_SEND_MSG: + if (verbose > 1) + dprintk("%s: Sending message\n", __FUNCTION__); + if ((ca_send_message(state, p_ca_message, arg)) < 0) { + dprintk("%s: -->CA_SEND_MSG Failed !\n", __FUNCTION__); + return -1; + } + + break; + + case CA_GET_MSG: + if (verbose > 1) + dprintk("%s: Getting message\n", __FUNCTION__); + if ((ca_get_message(state, p_ca_message, arg)) < 0) { + dprintk("%s: -->CA_GET_MSG Failed !\n", __FUNCTION__); + return -1; + } + if (verbose > 1) + dprintk("%s: -->CA_GET_MSG Success !\n", __FUNCTION__); + + break; + + case CA_RESET: + if (verbose > 1) + dprintk("%s: Resetting DST\n", __FUNCTION__); + dst_error_bailout(state); + msleep(4000); + + break; + + case CA_GET_SLOT_INFO: + if (verbose > 1) + dprintk("%s: Getting Slot info\n", __FUNCTION__); + if ((ca_get_slot_info(state, p_ca_slot_info, arg)) < 0) { + dprintk("%s: -->CA_GET_SLOT_INFO Failed !\n", __FUNCTION__); + return -1; + } + if (verbose > 1) + dprintk("%s: -->CA_GET_SLOT_INFO Success !\n", __FUNCTION__); + + break; + + case CA_GET_CAP: + if (verbose > 1) + dprintk("%s: Getting Slot capabilities\n", __FUNCTION__); + if ((ca_get_slot_caps(state, p_ca_caps, arg)) < 0) { + dprintk("%s: -->CA_GET_CAP Failed !\n", __FUNCTION__); + return -1; + } + if (verbose > 1) + dprintk("%s: -->CA_GET_CAP Success !\n", __FUNCTION__); + + break; + + case CA_GET_DESCR_INFO: + if (verbose > 1) + dprintk("%s: Getting descrambler description\n", __FUNCTION__); + if ((ca_get_slot_descr(state, p_ca_message, arg)) < 0) { + dprintk("%s: -->CA_GET_DESCR_INFO Failed !\n", __FUNCTION__); + return -1; + } + if (verbose > 1) + dprintk("%s: -->CA_GET_DESCR_INFO Success !\n", __FUNCTION__); + + break; + + case CA_SET_DESCR: + if (verbose > 1) + dprintk("%s: Setting descrambler\n", __FUNCTION__); + if ((ca_set_slot_descr()) < 0) { + dprintk("%s: -->CA_SET_DESCR Failed !\n", __FUNCTION__); + return -1; + } + if (verbose > 1) + dprintk("%s: -->CA_SET_DESCR Success !\n", __FUNCTION__); + + break; + + case CA_SET_PID: + if (verbose > 1) + dprintk("%s: Setting PID\n", __FUNCTION__); + if ((ca_set_pid()) < 0) { + dprintk("%s: -->CA_SET_PID Failed !\n", __FUNCTION__); + return -1; + } + if (verbose > 1) + dprintk("%s: -->CA_SET_PID Success !\n", __FUNCTION__); + + default: + return -EOPNOTSUPP; + }; + + return 0; +} + +static int dst_ca_open(struct inode *inode, struct file *file) +{ + if (verbose > 4) + dprintk("%s:Device opened [%p]\n", __FUNCTION__, file); + try_module_get(THIS_MODULE); + + return 0; +} + +static int dst_ca_release(struct inode *inode, struct file *file) +{ + if (verbose > 4) + dprintk("%s:Device closed.\n", __FUNCTION__); + module_put(THIS_MODULE); + + return 0; +} + +static int dst_ca_read(struct file *file, char __user * buffer, size_t length, loff_t * offset) +{ + int bytes_read = 0; + + if (verbose > 4) + dprintk("%s:Device read.\n", __FUNCTION__); + + return bytes_read; +} + +static int dst_ca_write(struct file *file, const char __user * buffer, size_t length, loff_t * offset) +{ + if (verbose > 4) + dprintk("%s:Device write.\n", __FUNCTION__); + + return 0; +} + +static struct file_operations dst_ca_fops = { + .owner = THIS_MODULE, + .ioctl = (void *)dst_ca_ioctl, + .open = dst_ca_open, + .release = dst_ca_release, + .read = dst_ca_read, + .write = dst_ca_write +}; + +static struct dvb_device dvbdev_ca = { + .priv = NULL, + .users = 1, + .readers = 1, + .writers = 1, + .fops = &dst_ca_fops +}; + +int dst_ca_attach(struct dst_state *dst, struct dvb_adapter *dvb_adapter) +{ + struct dvb_device *dvbdev; + if (verbose > 4) + dprintk("%s:registering DST-CA device\n", __FUNCTION__); + dvb_register_device(dvb_adapter, &dvbdev, &dvbdev_ca, dst, DVB_DEVICE_CA); + return 0; +} + +EXPORT_SYMBOL(dst_ca_attach); + +MODULE_DESCRIPTION("DST DVB-S/T/C Combo CA driver"); +MODULE_AUTHOR("Manu Abraham"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/bt8xx/dst_ca.h b/drivers/media/dvb/bt8xx/dst_ca.h new file mode 100644 index 00000000000..59cd0ddd6d8 --- /dev/null +++ b/drivers/media/dvb/bt8xx/dst_ca.h @@ -0,0 +1,58 @@ +/* + CA-driver for TwinHan DST Frontend/Card + + Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef _DST_CA_H_ +#define _DST_CA_H_ + +#define RETRIES 5 + + +#define CA_APP_INFO_ENQUIRY 0x9f8020 +#define CA_APP_INFO 0x9f8021 +#define CA_ENTER_MENU 0x9f8022 +#define CA_INFO_ENQUIRY 0x9f8030 +#define CA_INFO 0x9f8031 +#define CA_PMT 0x9f8032 +#define CA_PMT_REPLY 0x9f8033 + +#define CA_CLOSE_MMI 0x9f8800 +#define CA_DISPLAY_CONTROL 0x9f8801 +#define CA_DISPLAY_REPLY 0x9f8802 +#define CA_TEXT_LAST 0x9f8803 +#define CA_TEXT_MORE 0x9f8804 +#define CA_KEYPAD_CONTROL 0x9f8805 +#define CA_KEYPRESS 0x9f8806 + +#define CA_ENQUIRY 0x9f8807 +#define CA_ANSWER 0x9f8808 +#define CA_MENU_LAST 0x9f8809 +#define CA_MENU_MORE 0x9f880a +#define CA_MENU_ANSWER 0x9f880b +#define CA_LIST_LAST 0x9f880c +#define CA_LIST_MORE 0x9f880d + + +struct dst_ca_private { + struct dst_state *dst; + struct dvb_device *dvbdev; +}; + + +#endif diff --git a/drivers/media/dvb/bt8xx/dst_common.h b/drivers/media/dvb/bt8xx/dst_common.h new file mode 100644 index 00000000000..0b3da29245f --- /dev/null +++ b/drivers/media/dvb/bt8xx/dst_common.h @@ -0,0 +1,153 @@ +/* + Frontend-driver for TwinHan DST Frontend + + Copyright (C) 2003 Jamie Honan + Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef DST_COMMON_H +#define DST_COMMON_H + +#include <linux/dvb/frontend.h> +#include <linux/device.h> +#include "bt878.h" + +#include "dst_ca.h" + + +#define NO_DELAY 0 +#define LONG_DELAY 1 +#define DEVICE_INIT 2 + +#define DELAY 1 + +#define DST_TYPE_IS_SAT 0 +#define DST_TYPE_IS_TERR 1 +#define DST_TYPE_IS_CABLE 2 +#define DST_TYPE_IS_ATSC 3 + +#define DST_TYPE_HAS_NEWTUNE 1 +#define DST_TYPE_HAS_TS204 2 +#define DST_TYPE_HAS_SYMDIV 4 +#define DST_TYPE_HAS_FW_1 8 +#define DST_TYPE_HAS_FW_2 16 +#define DST_TYPE_HAS_FW_3 32 +#define DST_TYPE_HAS_FW_BUILD 64 + +/* Card capability list */ + +#define DST_TYPE_HAS_MAC 1 +#define DST_TYPE_HAS_DISEQC3 2 +#define DST_TYPE_HAS_DISEQC4 4 +#define DST_TYPE_HAS_DISEQC5 8 +#define DST_TYPE_HAS_MOTO 16 +#define DST_TYPE_HAS_CA 32 +#define DST_TYPE_HAS_ANALOG 64 /* Analog inputs */ +#define DST_TYPE_HAS_SESSION 128 + + +#define RDC_8820_PIO_0_DISABLE 0 +#define RDC_8820_PIO_0_ENABLE 1 +#define RDC_8820_INT 2 +#define RDC_8820_RESET 4 + +/* DST Communication */ +#define GET_REPLY 1 +#define NO_REPLY 0 + +#define GET_ACK 1 +#define FIXED_COMM 8 + +#define ACK 0xff + +struct dst_state { + + struct i2c_adapter* i2c; + + struct bt878* bt; + + struct dvb_frontend_ops ops; + + /* configuration settings */ + const struct dst_config* config; + + struct dvb_frontend frontend; + + /* private ASIC data */ + u8 tx_tuna[10]; + u8 rx_tuna[10]; + u8 rxbuffer[10]; + u8 diseq_flags; + u8 dst_type; + u32 type_flags; + u32 frequency; /* intermediate frequency in kHz for QPSK */ + fe_spectral_inversion_t inversion; + u32 symbol_rate; /* symbol rate in Symbols per second */ + fe_code_rate_t fec; + fe_sec_voltage_t voltage; + fe_sec_tone_mode_t tone; + u32 decode_freq; + u8 decode_lock; + u16 decode_strength; + u16 decode_snr; + unsigned long cur_jiff; + u8 k22; + fe_bandwidth_t bandwidth; + u32 dst_hw_cap; + u8 dst_fw_version; + fe_sec_mini_cmd_t minicmd; + u8 messages[256]; +}; + +struct dst_types { + char *device_id; + int offset; + u8 dst_type; + u32 type_flags; + u32 dst_feature; +}; + + + +struct dst_config +{ + /* the ASIC i2c address */ + u8 demod_address; +}; + + +int rdc_reset_state(struct dst_state *state); +int rdc_8820_reset(struct dst_state *state); + +int dst_wait_dst_ready(struct dst_state *state, u8 delay_mode); +int dst_pio_enable(struct dst_state *state); +int dst_pio_disable(struct dst_state *state); +int dst_error_recovery(struct dst_state* state); +int dst_error_bailout(struct dst_state *state); +int dst_comm_init(struct dst_state* state); + +int write_dst(struct dst_state *state, u8 * data, u8 len); +int read_dst(struct dst_state *state, u8 * ret, u8 len); +u8 dst_check_sum(u8 * buf, u32 len); +struct dst_state* dst_attach(struct dst_state* state, struct dvb_adapter *dvb_adapter); +int dst_ca_attach(struct dst_state *state, struct dvb_adapter *dvb_adapter); +int dst_gpio_outb(struct dst_state* state, u32 mask, u32 enbb, u32 outhigh, int delay); + +int dst_command(struct dst_state* state, u8 * data, u8 len); + + +#endif // DST_COMMON_H diff --git a/drivers/media/dvb/bt8xx/dst_priv.h b/drivers/media/dvb/bt8xx/dst_priv.h index 80488aa628b..3974a4c6ebe 100644 --- a/drivers/media/dvb/bt8xx/dst_priv.h +++ b/drivers/media/dvb/bt8xx/dst_priv.h @@ -33,4 +33,3 @@ union dst_gpio_packet { struct bt878; int bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *mp); - diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c index b735397f59a..6f857c6091f 100644 --- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c +++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c @@ -142,7 +142,7 @@ static int thomson_dtt7579_demod_init(struct dvb_frontend* fe) mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); - mt352_write(fe, mt352_gpp_ctl_cfg, sizeof(mt352_gpp_ctl_cfg)); + mt352_write(fe, mt352_gpp_ctl_cfg, sizeof(mt352_gpp_ctl_cfg)); mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); return 0; @@ -161,7 +161,7 @@ static int thomson_dtt7579_pll_set(struct dvb_frontend* fe, struct dvb_frontend_ else if (params->frequency < 771000000) cp = 0xbc; else cp = 0xf4; - if (params->frequency == 0) bs = 0x03; + if (params->frequency == 0) bs = 0x03; else if (params->frequency < 443250000) bs = 0x02; else bs = 0x08; @@ -190,44 +190,44 @@ static int cx24108_pll_set(struct dvb_frontend* fe, struct dvb_frontend_paramete u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000, - 1576000,1718000,1856000,2036000,2150000}; + 1576000,1718000,1856000,2036000,2150000}; u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000, - 0x00102000,0x00104000,0x00108000,0x00110000, - 0x00120000,0x00140000}; + 0x00102000,0x00104000,0x00108000,0x00110000, + 0x00120000,0x00140000}; #define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */ - printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq); - - /* This is really the bit driving the tuner chip cx24108 */ - - if(freq<950000) freq=950000; /* kHz */ - if(freq>2150000) freq=2150000; /* satellite IF is 950..2150MHz */ - - /* decide which VCO to use for the input frequency */ - for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++); - printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq); - band=bandsel[i]; - /* the gain values must be set by SetSymbolrate */ - /* compute the pll divider needed, from Conexant data sheet, - resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4, - depending on the divider bit. It is set to /4 on the 2 lowest - bands */ - n=((i<=2?2:1)*freq*10L)/(XTAL/100); - a=n%32; n/=32; if(a==0) n--; - pump=(freq<(osci[i-1]+osci[i])/2); - pll=0xf8000000| - ((pump?1:2)<<(14+11))| - ((n&0x1ff)<<(5+11))| - ((a&0x1f)<<11); - /* everything is shifted left 11 bits to left-align the bits in the - 32bit word. Output to the tuner goes MSB-aligned, after all */ - printk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a); - cx24110_pll_write(fe,band); - /* set vga and vca to their widest-band settings, as a precaution. - SetSymbolrate might not be called to set this up */ - cx24110_pll_write(fe,0x500c0000); - cx24110_pll_write(fe,0x83f1f800); - cx24110_pll_write(fe,pll); + printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq); + + /* This is really the bit driving the tuner chip cx24108 */ + + if(freq<950000) freq=950000; /* kHz */ + if(freq>2150000) freq=2150000; /* satellite IF is 950..2150MHz */ + + /* decide which VCO to use for the input frequency */ + for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++); + printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq); + band=bandsel[i]; + /* the gain values must be set by SetSymbolrate */ + /* compute the pll divider needed, from Conexant data sheet, + resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4, + depending on the divider bit. It is set to /4 on the 2 lowest + bands */ + n=((i<=2?2:1)*freq*10L)/(XTAL/100); + a=n%32; n/=32; if(a==0) n--; + pump=(freq<(osci[i-1]+osci[i])/2); + pll=0xf8000000| + ((pump?1:2)<<(14+11))| + ((n&0x1ff)<<(5+11))| + ((a&0x1f)<<11); + /* everything is shifted left 11 bits to left-align the bits in the + 32bit word. Output to the tuner goes MSB-aligned, after all */ + printk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a); + cx24110_pll_write(fe,band); + /* set vga and vca to their widest-band settings, as a precaution. + SetSymbolrate might not be called to set this up */ + cx24110_pll_write(fe,0x500c0000); + cx24110_pll_write(fe,0x83f1f800); + cx24110_pll_write(fe,pll); /* writereg(client,0x56,0x7f);*/ return 0; @@ -299,7 +299,7 @@ static int advbt771_samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe) static u8 mt352_reset [] = { 0x50, 0x80 }; static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; static u8 mt352_agc_cfg [] = { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF, - 0x00, 0xFF, 0x00, 0x40, 0x40 }; + 0x00, 0xFF, 0x00, 0x40, 0x40 }; static u8 mt352_av771_extra[] = { 0xB5, 0x7A }; static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; @@ -463,6 +463,9 @@ static struct nxt6000_config vp3021_alps_tded4_config = { static void frontend_init(struct dvb_bt8xx_card *card, u32 type) { + int ret; + struct dst_state* state = NULL; + switch(type) { #ifdef BTTV_DVICO_DVBT_LITE case BTTV_DVICO_DVBT_LITE: @@ -503,7 +506,25 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) break; case BTTV_TWINHAN_DST: - card->fe = dst_attach(&dst_config, card->i2c_adapter, card->bt); + /* DST is not a frontend driver !!! */ + state = (struct dst_state *) kmalloc(sizeof (struct dst_state), GFP_KERNEL); + /* Setup the Card */ + state->config = &dst_config; + state->i2c = card->i2c_adapter; + state->bt = card->bt; + + /* DST is not a frontend, attaching the ASIC */ + if ((dst_attach(state, &card->dvb_adapter)) == NULL) { + printk("%s: Could not find a Twinhan DST.\n", __FUNCTION__); + break; + } + card->fe = &state->frontend; + + /* Attach other DST peripherals if any */ + /* Conditional Access device */ + if (state->dst_hw_cap & DST_TYPE_HAS_CA) { + ret = dst_ca_attach(state, &card->dvb_adapter); + } if (card->fe != NULL) { break; } @@ -531,7 +552,7 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type) card->bt->dev->subsystem_vendor, card->bt->dev->subsystem_device); } else { - if (dvb_register_frontend(card->dvb_adapter, card->fe)) { + if (dvb_register_frontend(&card->dvb_adapter, card->fe)) { printk("dvb-bt8xx: Frontend registration failed!\n"); if (card->fe->ops->release) card->fe->ops->release(card->fe); @@ -550,7 +571,7 @@ static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type) return result; } - card->dvb_adapter->priv = card; + card->dvb_adapter.priv = card; card->bt->adapter = card->i2c_adapter; @@ -568,7 +589,7 @@ static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type) if ((result = dvb_dmx_init(&card->demux)) < 0) { printk("dvb_bt8xx: dvb_dmx_init failed (errno = %d)\n", result); - dvb_unregister_adapter(card->dvb_adapter); + dvb_unregister_adapter(&card->dvb_adapter); return result; } @@ -576,11 +597,11 @@ static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type) card->dmxdev.demux = &card->demux.dmx; card->dmxdev.capabilities = 0; - if ((result = dvb_dmxdev_init(&card->dmxdev, card->dvb_adapter)) < 0) { + if ((result = dvb_dmxdev_init(&card->dmxdev, &card->dvb_adapter)) < 0) { printk("dvb_bt8xx: dvb_dmxdev_init failed (errno = %d)\n", result); dvb_dmx_release(&card->demux); - dvb_unregister_adapter(card->dvb_adapter); + dvb_unregister_adapter(&card->dvb_adapter); return result; } @@ -591,7 +612,7 @@ static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type) dvb_dmxdev_release(&card->dmxdev); dvb_dmx_release(&card->demux); - dvb_unregister_adapter(card->dvb_adapter); + dvb_unregister_adapter(&card->dvb_adapter); return result; } @@ -603,7 +624,7 @@ static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type) card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw); dvb_dmxdev_release(&card->dmxdev); dvb_dmx_release(&card->demux); - dvb_unregister_adapter(card->dvb_adapter); + dvb_unregister_adapter(&card->dvb_adapter); return result; } @@ -614,11 +635,11 @@ static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type) card->demux.dmx.remove_frontend(&card->demux.dmx, &card->fe_hw); dvb_dmxdev_release(&card->dmxdev); dvb_dmx_release(&card->demux); - dvb_unregister_adapter(card->dvb_adapter); + dvb_unregister_adapter(&card->dvb_adapter); return result; } - dvb_net_init(card->dvb_adapter, &card->dvbnet, &card->demux.dmx); + dvb_net_init(&card->dvb_adapter, &card->dvbnet, &card->demux.dmx); tasklet_init(&card->bt->tasklet, dvb_bt8xx_task, (unsigned long) card); @@ -648,7 +669,7 @@ static int dvb_bt8xx_probe(struct device *dev) case BTTV_PINNACLESAT: card->gpio_mode = 0x0400c060; /* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR, - BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */ + BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */ card->op_sync_orin = 0; card->irq_err_ignore = 0; break; @@ -759,7 +780,7 @@ static int dvb_bt8xx_remove(struct device *dev) dvb_dmxdev_release(&card->dmxdev); dvb_dmx_release(&card->demux); if (card->fe) dvb_unregister_frontend(card->fe); - dvb_unregister_adapter(card->dvb_adapter); + dvb_unregister_adapter(&card->dvb_adapter); kfree(card); diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.h b/drivers/media/dvb/bt8xx/dvb-bt8xx.h index 80ef189f930..2923b3b0dd3 100644 --- a/drivers/media/dvb/bt8xx/dvb-bt8xx.h +++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.h @@ -31,7 +31,7 @@ #include "bttv.h" #include "mt352.h" #include "sp887x.h" -#include "dst.h" +#include "dst_common.h" #include "nxt6000.h" #include "cx24110.h" #include "or51211.h" @@ -40,7 +40,7 @@ struct dvb_bt8xx_card { struct semaphore lock; int nfeeds; char card_name[32]; - struct dvb_adapter *dvb_adapter; + struct dvb_adapter dvb_adapter; struct bt878 *bt; unsigned int bttv_nr; struct dvb_demux demux; diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index 28d4d926de3..96c57fde95a 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -119,7 +119,7 @@ struct cinergyt2 { struct dvb_demux demux; struct usb_device *udev; struct semaphore sem; - struct dvb_adapter *adapter; + struct dvb_adapter adapter; struct dvb_device *fedev; struct dmxdev dmxdev; struct dvb_net dvbnet; @@ -813,15 +813,15 @@ static int cinergyt2_probe (struct usb_interface *intf, cinergyt2->dmxdev.demux = &cinergyt2->demux.dmx; cinergyt2->dmxdev.capabilities = 0; - if ((err = dvb_dmxdev_init(&cinergyt2->dmxdev, cinergyt2->adapter)) < 0) { + if ((err = dvb_dmxdev_init(&cinergyt2->dmxdev, &cinergyt2->adapter)) < 0) { dprintk(1, "dvb_dmxdev_init() failed (err = %d)\n", err); goto bailout; } - if (dvb_net_init(cinergyt2->adapter, &cinergyt2->dvbnet, &cinergyt2->demux.dmx)) + if (dvb_net_init(&cinergyt2->adapter, &cinergyt2->dvbnet, &cinergyt2->demux.dmx)) dprintk(1, "dvb_net_init() failed!\n"); - dvb_register_device(cinergyt2->adapter, &cinergyt2->fedev, + dvb_register_device(&cinergyt2->adapter, &cinergyt2->fedev, &cinergyt2_fe_template, cinergyt2, DVB_DEVICE_FRONTEND); @@ -848,7 +848,7 @@ static int cinergyt2_probe (struct usb_interface *intf, bailout: dvb_dmxdev_release(&cinergyt2->dmxdev); dvb_dmx_release(&cinergyt2->demux); - dvb_unregister_adapter (cinergyt2->adapter); + dvb_unregister_adapter (&cinergyt2->adapter); cinergyt2_free_stream_urbs (cinergyt2); kfree(cinergyt2); return -ENOMEM; @@ -872,7 +872,7 @@ static void cinergyt2_disconnect (struct usb_interface *intf) dvb_dmxdev_release(&cinergyt2->dmxdev); dvb_dmx_release(&cinergyt2->demux); dvb_unregister_device(cinergyt2->fedev); - dvb_unregister_adapter(cinergyt2->adapter); + dvb_unregister_adapter(&cinergyt2->adapter); cinergyt2_free_stream_urbs(cinergyt2); up(&cinergyt2->sem); diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c b/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c index 04e54ec093f..400b439e804 100644 --- a/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c +++ b/drivers/media/dvb/dibusb/dvb-dibusb-dvb.c @@ -131,7 +131,7 @@ int dibusb_dvb_init(struct usb_dibusb *dib) deb_info("dvb_register_adapter failed: error %d", ret); goto err; } - dib->adapter->priv = dib; + dib->adapter.priv = dib; /* i2c is done in dibusb_i2c_init */ @@ -151,18 +151,18 @@ int dibusb_dvb_init(struct usb_dibusb *dib) dib->dmxdev.filternum = dib->demux.filternum; dib->dmxdev.demux = &dib->demux.dmx; dib->dmxdev.capabilities = 0; - if ((ret = dvb_dmxdev_init(&dib->dmxdev, dib->adapter)) < 0) { + if ((ret = dvb_dmxdev_init(&dib->dmxdev, &dib->adapter)) < 0) { err("dvb_dmxdev_init failed: error %d",ret); goto err_dmx_dev; } - dvb_net_init(dib->adapter, &dib->dvb_net, &dib->demux.dmx); + dvb_net_init(&dib->adapter, &dib->dvb_net, &dib->demux.dmx); goto success; err_dmx_dev: dvb_dmx_release(&dib->demux); err_dmx: - dvb_unregister_adapter(dib->adapter); + dvb_unregister_adapter(&dib->adapter); err: return ret; success: @@ -179,7 +179,7 @@ int dibusb_dvb_exit(struct usb_dibusb *dib) dib->demux.dmx.close(&dib->demux.dmx); dvb_dmxdev_release(&dib->dmxdev); dvb_dmx_release(&dib->demux); - dvb_unregister_adapter(dib->adapter); + dvb_unregister_adapter(&dib->adapter); } return 0; } diff --git a/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c b/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c index 2ed89488c7c..5a71b88797d 100644 --- a/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c +++ b/drivers/media/dvb/dibusb/dvb-dibusb-fe-i2c.c @@ -183,7 +183,7 @@ int dibusb_fe_init(struct usb_dibusb* dib) dib->dibdev->name); return -ENODEV; } else { - if (dvb_register_frontend(dib->adapter, dib->fe)) { + if (dvb_register_frontend(&dib->adapter, dib->fe)) { err("Frontend registration failed."); if (dib->fe->ops->release) dib->fe->ops->release(dib->fe); @@ -206,7 +206,7 @@ int dibusb_i2c_init(struct usb_dibusb *dib) { int ret = 0; - dib->adapter->priv = dib; + dib->adapter.priv = dib; strncpy(dib->i2c_adap.name,dib->dibdev->name,I2C_NAME_SIZE); #ifdef I2C_ADAP_CLASS_TV_DIGITAL diff --git a/drivers/media/dvb/dibusb/dvb-dibusb.h b/drivers/media/dvb/dibusb/dvb-dibusb.h index 52cd35dd9d8..c965b64fb1a 100644 --- a/drivers/media/dvb/dibusb/dvb-dibusb.h +++ b/drivers/media/dvb/dibusb/dvb-dibusb.h @@ -181,7 +181,7 @@ struct usb_dibusb { struct semaphore i2c_sem; /* dvb */ - struct dvb_adapter *adapter; + struct dvb_adapter adapter; struct dmxdev dmxdev; struct dvb_demux demux; struct dvb_net dvb_net; diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c index 1863f1dfb00..c225de7ffd8 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb/dvb-core/dmxdev.c @@ -175,8 +175,8 @@ static inline void dvb_dmxdev_dvr_state_set(struct dmxdev_dvr *dmxdevdvr, int st static int dvb_dvr_open(struct inode *inode, struct file *file) { - struct dvb_device *dvbdev=(struct dvb_device *) file->private_data; - struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv; + struct dvb_device *dvbdev = file->private_data; + struct dmxdev *dmxdev = dvbdev->priv; struct dmx_frontend *front; dprintk ("function : %s\n", __FUNCTION__); @@ -224,8 +224,8 @@ static int dvb_dvr_open(struct inode *inode, struct file *file) static int dvb_dvr_release(struct inode *inode, struct file *file) { - struct dvb_device *dvbdev=(struct dvb_device *) file->private_data; - struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv; + struct dvb_device *dvbdev = file->private_data; + struct dmxdev *dmxdev = dvbdev->priv; if (down_interruptible (&dmxdev->mutex)) return -ERESTARTSYS; @@ -252,8 +252,8 @@ static int dvb_dvr_release(struct inode *inode, struct file *file) static ssize_t dvb_dvr_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { - struct dvb_device *dvbdev=(struct dvb_device *) file->private_data; - struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv; + struct dvb_device *dvbdev = file->private_data; + struct dmxdev *dmxdev = dvbdev->priv; int ret; if (!dmxdev->demux->write) @@ -270,8 +270,8 @@ static ssize_t dvb_dvr_write(struct file *file, const char __user *buf, static ssize_t dvb_dvr_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { - struct dvb_device *dvbdev=(struct dvb_device *) file->private_data; - struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv; + struct dvb_device *dvbdev = file->private_data; + struct dmxdev *dmxdev = dvbdev->priv; int ret; //down(&dmxdev->mutex); @@ -345,7 +345,7 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len, const u8 *buffer2, size_t buffer2_len, struct dmx_section_filter *filter, enum dmx_success success) { - struct dmxdev_filter *dmxdevfilter=(struct dmxdev_filter *) filter->priv; + struct dmxdev_filter *dmxdevfilter = filter->priv; int ret; if (dmxdevfilter->buffer.error) { @@ -381,7 +381,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len, const u8 *buffer2, size_t buffer2_len, struct dmx_ts_feed *feed, enum dmx_success success) { - struct dmxdev_filter *dmxdevfilter=(struct dmxdev_filter *) feed->priv; + struct dmxdev_filter *dmxdevfilter = feed->priv; struct dmxdev_buffer *buffer; int ret; @@ -684,8 +684,8 @@ static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter) static int dvb_demux_open(struct inode *inode, struct file *file) { - struct dvb_device *dvbdev=(struct dvb_device *) file->private_data; - struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv; + struct dvb_device *dvbdev = file->private_data; + struct dmxdev *dmxdev = dvbdev->priv; int i; struct dmxdev_filter *dmxdevfilter; @@ -1013,8 +1013,8 @@ static struct dvb_device dvbdev_demux = { static int dvb_dvr_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *parg) { - struct dvb_device *dvbdev=(struct dvb_device *) file->private_data; - struct dmxdev *dmxdev=(struct dmxdev *) dvbdev->priv; + struct dvb_device *dvbdev = file->private_data; + struct dmxdev *dmxdev = dvbdev->priv; int ret=0; @@ -1044,8 +1044,8 @@ static int dvb_dvr_ioctl(struct inode *inode, struct file *file, static unsigned int dvb_dvr_poll (struct file *file, poll_table *wait) { - struct dvb_device *dvbdev = (struct dvb_device *) file->private_data; - struct dmxdev *dmxdev = (struct dmxdev *) dvbdev->priv; + struct dvb_device *dvbdev = file->private_data; + struct dmxdev *dmxdev = dvbdev->priv; unsigned int mask = 0; dprintk ("function : %s\n", __FUNCTION__); diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c index c1ea89f2880..0eb9aa711fb 100644 --- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c +++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c @@ -829,7 +829,7 @@ EXPORT_SYMBOL(dvb_ca_en50221_camready_irq); */ void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221 *pubca, int slot, int change_type) { - struct dvb_ca_private *ca = (struct dvb_ca_private *) pubca->private; + struct dvb_ca_private *ca = pubca->private; dprintk("CAMCHANGE IRQ slot:%i change_type:%i\n", slot, change_type); @@ -857,7 +857,7 @@ EXPORT_SYMBOL(dvb_ca_en50221_frda_irq); */ void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot) { - struct dvb_ca_private *ca = (struct dvb_ca_private *) pubca->private; + struct dvb_ca_private *ca = pubca->private; dprintk("CAMREADY IRQ slot:%i\n", slot); @@ -876,7 +876,7 @@ void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot) */ void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *pubca, int slot) { - struct dvb_ca_private *ca = (struct dvb_ca_private *) pubca->private; + struct dvb_ca_private *ca = pubca->private; int flags; dprintk("FR/DA IRQ slot:%i\n", slot); @@ -993,7 +993,7 @@ static void dvb_ca_en50221_thread_update_delay(struct dvb_ca_private *ca) */ static int dvb_ca_en50221_thread(void *data) { - struct dvb_ca_private *ca = (struct dvb_ca_private *) data; + struct dvb_ca_private *ca = data; char name[15]; int slot; int flags; @@ -1202,8 +1202,8 @@ static int dvb_ca_en50221_thread(void *data) static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *parg) { - struct dvb_device *dvbdev = (struct dvb_device *) file->private_data; - struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv; + struct dvb_device *dvbdev = file->private_data; + struct dvb_ca_private *ca = dvbdev->priv; int err = 0; int slot; @@ -1225,7 +1225,7 @@ static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file, break; case CA_GET_CAP: { - struct ca_caps *caps = (struct ca_caps *) parg; + struct ca_caps *caps = parg; caps->slot_num = ca->slot_count; caps->slot_type = CA_CI_LINK; @@ -1235,7 +1235,7 @@ static int dvb_ca_en50221_io_do_ioctl(struct inode *inode, struct file *file, } case CA_GET_SLOT_INFO: { - struct ca_slot_info *info = (struct ca_slot_info *) parg; + struct ca_slot_info *info = parg; if ((info->num > ca->slot_count) || (info->num < 0)) return -EINVAL; @@ -1291,8 +1291,8 @@ static int dvb_ca_en50221_io_ioctl(struct inode *inode, struct file *file, static ssize_t dvb_ca_en50221_io_write(struct file *file, const char __user * buf, size_t count, loff_t * ppos) { - struct dvb_device *dvbdev = (struct dvb_device *) file->private_data; - struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv; + struct dvb_device *dvbdev = file->private_data; + struct dvb_ca_private *ca = dvbdev->priv; u8 slot, connection_id; int status; char fragbuf[HOST_LINK_BUF_SIZE]; @@ -1428,8 +1428,8 @@ static int dvb_ca_en50221_io_read_condition(struct dvb_ca_private *ca, int *resu static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user * buf, size_t count, loff_t * ppos) { - struct dvb_device *dvbdev = (struct dvb_device *) file->private_data; - struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv; + struct dvb_device *dvbdev = file->private_data; + struct dvb_ca_private *ca = dvbdev->priv; int status; int result = 0; u8 hdr[2]; @@ -1526,8 +1526,8 @@ static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user * buf, */ static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file) { - struct dvb_device *dvbdev = (struct dvb_device *) file->private_data; - struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv; + struct dvb_device *dvbdev = file->private_data; + struct dvb_ca_private *ca = dvbdev->priv; int err; int i; @@ -1569,8 +1569,8 @@ static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file) */ static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file) { - struct dvb_device *dvbdev = (struct dvb_device *) file->private_data; - struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv; + struct dvb_device *dvbdev = file->private_data; + struct dvb_ca_private *ca = dvbdev->priv; int err = 0; dprintk("%s\n", __FUNCTION__); @@ -1597,8 +1597,8 @@ static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file) */ static unsigned int dvb_ca_en50221_io_poll(struct file *file, poll_table * wait) { - struct dvb_device *dvbdev = (struct dvb_device *) file->private_data; - struct dvb_ca_private *ca = (struct dvb_ca_private *) dvbdev->priv; + struct dvb_device *dvbdev = file->private_data; + struct dvb_ca_private *ca = dvbdev->priv; unsigned int mask = 0; int slot; int result = 0; @@ -1750,7 +1750,7 @@ EXPORT_SYMBOL(dvb_ca_en50221_release); */ void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca) { - struct dvb_ca_private *ca = (struct dvb_ca_private *) pubca->private; + struct dvb_ca_private *ca = pubca->private; int i; dprintk("%s\n", __FUNCTION__); diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 59a9adfae1e..d19301d90a0 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -48,7 +48,7 @@ static int dvb_override_tune_delay; static int dvb_powerdown_on_sleep = 1; module_param_named(frontend_debug, dvb_frontend_debug, int, 0644); -MODULE_PARM_DESC(dvb_frontend_debug, "Turn on/off frontend core debugging (default:off)."); +MODULE_PARM_DESC(frontend_debug, "Turn on/off frontend core debugging (default:off)."); module_param(dvb_shutdown_timeout, int, 0444); MODULE_PARM_DESC(dvb_shutdown_timeout, "wait <shutdown_timeout> seconds after close() before suspending hardware"); module_param(dvb_force_auto_inversion, int, 0444); @@ -117,7 +117,7 @@ struct dvb_frontend_private { static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status) { - struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; struct dvb_fe_events *events = &fepriv->events; struct dvb_frontend_event *e; int wp; @@ -155,7 +155,7 @@ static void dvb_frontend_add_event(struct dvb_frontend *fe, fe_status_t status) static int dvb_frontend_get_event(struct dvb_frontend *fe, struct dvb_frontend_event *event, int flags) { - struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; struct dvb_fe_events *events = &fepriv->events; dprintk ("%s\n", __FUNCTION__); @@ -234,7 +234,7 @@ static int dvb_frontend_autotune(struct dvb_frontend *fe, int check_wrapped) { int autoinversion; int ready = 0; - struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; int original_inversion = fepriv->parameters.inversion; u32 original_frequency = fepriv->parameters.frequency; @@ -321,7 +321,7 @@ static int dvb_frontend_autotune(struct dvb_frontend *fe, int check_wrapped) static int dvb_frontend_is_exiting(struct dvb_frontend *fe) { - struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; if (fepriv->exit) return 1; @@ -335,7 +335,7 @@ static int dvb_frontend_is_exiting(struct dvb_frontend *fe) static int dvb_frontend_should_wakeup(struct dvb_frontend *fe) { - struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; if (fepriv->wakeup) { fepriv->wakeup = 0; @@ -346,7 +346,7 @@ static int dvb_frontend_should_wakeup(struct dvb_frontend *fe) static void dvb_frontend_wakeup(struct dvb_frontend *fe) { - struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; fepriv->wakeup = 1; wake_up_interruptible(&fepriv->wait_queue); @@ -357,8 +357,8 @@ static void dvb_frontend_wakeup(struct dvb_frontend *fe) */ static int dvb_frontend_thread(void *data) { - struct dvb_frontend *fe = (struct dvb_frontend *) data; - struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv; + struct dvb_frontend *fe = data; + struct dvb_frontend_private *fepriv = fe->frontend_priv; unsigned long timeout; char name [15]; int quality = 0, delay = 3*HZ; @@ -520,7 +520,7 @@ static int dvb_frontend_thread(void *data) static void dvb_frontend_stop(struct dvb_frontend *fe) { unsigned long ret; - struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; dprintk ("%s\n", __FUNCTION__); @@ -559,7 +559,7 @@ static void dvb_frontend_stop(struct dvb_frontend *fe) static int dvb_frontend_start(struct dvb_frontend *fe) { int ret; - struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; dprintk ("%s\n", __FUNCTION__); @@ -597,7 +597,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, { struct dvb_device *dvbdev = file->private_data; struct dvb_frontend *fe = dvbdev->priv; - struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; int err = -EOPNOTSUPP; dprintk ("%s\n", __FUNCTION__); @@ -615,7 +615,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, switch (cmd) { case FE_GET_INFO: { - struct dvb_frontend_info* info = (struct dvb_frontend_info*) parg; + struct dvb_frontend_info* info = parg; memcpy(info, &fe->ops->info, sizeof(struct dvb_frontend_info)); /* Force the CAN_INVERSION_AUTO bit on. If the frontend doesn't @@ -793,7 +793,7 @@ static unsigned int dvb_frontend_poll(struct file *file, struct poll_table_struc { struct dvb_device *dvbdev = file->private_data; struct dvb_frontend *fe = dvbdev->priv; - struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; dprintk ("%s\n", __FUNCTION__); @@ -809,7 +809,7 @@ static int dvb_frontend_open(struct inode *inode, struct file *file) { struct dvb_device *dvbdev = file->private_data; struct dvb_frontend *fe = dvbdev->priv; - struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; int ret; dprintk ("%s\n", __FUNCTION__); @@ -833,7 +833,7 @@ static int dvb_frontend_release(struct inode *inode, struct file *file) { struct dvb_device *dvbdev = file->private_data; struct dvb_frontend *fe = dvbdev->priv; - struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; dprintk ("%s\n", __FUNCTION__); @@ -873,7 +873,7 @@ int dvb_register_frontend(struct dvb_adapter* dvb, up(&frontend_mutex); return -ENOMEM; } - fepriv = (struct dvb_frontend_private*) fe->frontend_priv; + fepriv = fe->frontend_priv; memset(fe->frontend_priv, 0, sizeof(struct dvb_frontend_private)); init_MUTEX (&fepriv->sem); @@ -897,7 +897,7 @@ EXPORT_SYMBOL(dvb_register_frontend); int dvb_unregister_frontend(struct dvb_frontend* fe) { - struct dvb_frontend_private *fepriv = (struct dvb_frontend_private*) fe->frontend_priv; + struct dvb_frontend_private *fepriv = fe->frontend_priv; dprintk ("%s\n", __FUNCTION__); down (&frontend_mutex); diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c index 44892e7abd3..6a968c346a3 100644 --- a/drivers/media/dvb/dvb-core/dvb_net.c +++ b/drivers/media/dvb/dvb-core/dvb_net.c @@ -315,7 +315,7 @@ static inline void reset_ule( struct dvb_net_priv *p ) */ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) { - struct dvb_net_priv *priv = (struct dvb_net_priv *)dev->priv; + struct dvb_net_priv *priv = dev->priv; unsigned long skipped = 0L; u8 *ts, *ts_end, *from_where = NULL, ts_remain = 0, how_much = 0, new_ts = 1; struct ethhdr *ethh = NULL; @@ -709,7 +709,7 @@ static int dvb_net_ts_callback(const u8 *buffer1, size_t buffer1_len, const u8 *buffer2, size_t buffer2_len, struct dmx_ts_feed *feed, enum dmx_success success) { - struct net_device *dev = (struct net_device *)feed->priv; + struct net_device *dev = feed->priv; if (buffer2 != 0) printk(KERN_WARNING "buffer2 not 0: %p.\n", buffer2); @@ -727,6 +727,7 @@ static void dvb_net_sec(struct net_device *dev, u8 *pkt, int pkt_len) u8 *eth; struct sk_buff *skb; struct net_device_stats *stats = &(((struct dvb_net_priv *) dev->priv)->stats); + int snap = 0; /* note: pkt_len includes a 32bit checksum */ if (pkt_len < 16) { @@ -750,9 +751,12 @@ static void dvb_net_sec(struct net_device *dev, u8 *pkt, int pkt_len) return; } if (pkt[5] & 0x02) { - //FIXME: handle LLC/SNAP - stats->rx_dropped++; - return; + /* handle LLC/SNAP, see rfc-1042 */ + if (pkt_len < 24 || memcmp(&pkt[12], "\xaa\xaa\x03\0\0\0", 6)) { + stats->rx_dropped++; + return; + } + snap = 8; } if (pkt[7]) { /* FIXME: assemble datagram from multiple sections */ @@ -762,9 +766,9 @@ static void dvb_net_sec(struct net_device *dev, u8 *pkt, int pkt_len) } /* we have 14 byte ethernet header (ip header follows); - * 12 byte MPE header; 4 byte checksum; + 2 byte alignment + * 12 byte MPE header; 4 byte checksum; + 2 byte alignment, 8 byte LLC/SNAP */ - if (!(skb = dev_alloc_skb(pkt_len - 4 - 12 + 14 + 2))) { + if (!(skb = dev_alloc_skb(pkt_len - 4 - 12 + 14 + 2 - snap))) { //printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name); stats->rx_dropped++; return; @@ -773,8 +777,8 @@ static void dvb_net_sec(struct net_device *dev, u8 *pkt, int pkt_len) skb->dev = dev; /* copy L3 payload */ - eth = (u8 *) skb_put(skb, pkt_len - 12 - 4 + 14); - memcpy(eth + 14, pkt + 12, pkt_len - 12 - 4); + eth = (u8 *) skb_put(skb, pkt_len - 12 - 4 + 14 - snap); + memcpy(eth + 14, pkt + 12 + snap, pkt_len - 12 - 4 - snap); /* create ethernet header: */ eth[0]=pkt[0x0b]; @@ -786,8 +790,21 @@ static void dvb_net_sec(struct net_device *dev, u8 *pkt, int pkt_len) eth[6]=eth[7]=eth[8]=eth[9]=eth[10]=eth[11]=0; - eth[12] = 0x08; /* ETH_P_IP */ - eth[13] = 0x00; + if (snap) { + eth[12] = pkt[18]; + eth[13] = pkt[19]; + } else { + /* protocol numbers are from rfc-1700 or + * http://www.iana.org/assignments/ethernet-numbers + */ + if (pkt[12] >> 4 == 6) { /* version field from IP header */ + eth[12] = 0x86; /* IPv6 */ + eth[13] = 0xdd; + } else { + eth[12] = 0x08; /* IPv4 */ + eth[13] = 0x00; + } + } skb->protocol = dvb_net_eth_type_trans(skb, dev); @@ -801,7 +818,7 @@ static int dvb_net_sec_callback(const u8 *buffer1, size_t buffer1_len, struct dmx_section_filter *filter, enum dmx_success success) { - struct net_device *dev=(struct net_device *) filter->priv; + struct net_device *dev = filter->priv; /** * we rely on the DVB API definition where exactly one complete @@ -826,7 +843,7 @@ static int dvb_net_filter_sec_set(struct net_device *dev, struct dmx_section_filter **secfilter, u8 *mac, u8 *mac_mask) { - struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv; + struct dvb_net_priv *priv = dev->priv; int ret; *secfilter=NULL; @@ -870,7 +887,7 @@ static int dvb_net_filter_sec_set(struct net_device *dev, static int dvb_net_feed_start(struct net_device *dev) { int ret, i; - struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv; + struct dvb_net_priv *priv = dev->priv; struct dmx_demux *demux = priv->demux; unsigned char *mac = (unsigned char *) dev->dev_addr; @@ -965,7 +982,7 @@ static int dvb_net_feed_start(struct net_device *dev) static int dvb_net_feed_stop(struct net_device *dev) { - struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv; + struct dvb_net_priv *priv = dev->priv; int i; dprintk("%s\n", __FUNCTION__); @@ -1016,7 +1033,7 @@ static int dvb_net_feed_stop(struct net_device *dev) static int dvb_set_mc_filter (struct net_device *dev, struct dev_mc_list *mc) { - struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv; + struct dvb_net_priv *priv = dev->priv; if (priv->multi_num == DVB_NET_MULTICAST_MAX) return -ENOMEM; @@ -1031,7 +1048,7 @@ static int dvb_set_mc_filter (struct net_device *dev, struct dev_mc_list *mc) static void wq_set_multicast_list (void *data) { struct net_device *dev = data; - struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv; + struct dvb_net_priv *priv = dev->priv; dvb_net_feed_stop(dev); @@ -1066,7 +1083,7 @@ static void wq_set_multicast_list (void *data) static void dvb_net_set_multicast_list (struct net_device *dev) { - struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv; + struct dvb_net_priv *priv = dev->priv; schedule_work(&priv->set_multicast_list_wq); } @@ -1084,7 +1101,7 @@ static void wq_restart_net_feed (void *data) static int dvb_net_set_mac (struct net_device *dev, void *p) { - struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv; + struct dvb_net_priv *priv = dev->priv; struct sockaddr *addr=p; memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); @@ -1098,7 +1115,7 @@ static int dvb_net_set_mac (struct net_device *dev, void *p) static int dvb_net_open(struct net_device *dev) { - struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv; + struct dvb_net_priv *priv = dev->priv; priv->in_use++; dvb_net_feed_start(dev); @@ -1108,7 +1125,7 @@ static int dvb_net_open(struct net_device *dev) static int dvb_net_stop(struct net_device *dev) { - struct dvb_net_priv *priv = (struct dvb_net_priv*) dev->priv; + struct dvb_net_priv *priv = dev->priv; priv->in_use--; return dvb_net_feed_stop(dev); @@ -1228,8 +1245,8 @@ static int dvb_net_remove_if(struct dvb_net *dvbnet, unsigned int num) static int dvb_net_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *parg) { - struct dvb_device *dvbdev = (struct dvb_device *) file->private_data; - struct dvb_net *dvbnet = (struct dvb_net *) dvbdev->priv; + struct dvb_device *dvbdev = file->private_data; + struct dvb_net *dvbnet = dvbdev->priv; if (((file->f_flags&O_ACCMODE)==O_RDONLY)) return -EPERM; @@ -1237,7 +1254,7 @@ static int dvb_net_do_ioctl(struct inode *inode, struct file *file, switch (cmd) { case NET_ADD_IF: { - struct dvb_net_if *dvbnetif=(struct dvb_net_if *)parg; + struct dvb_net_if *dvbnetif = parg; int result; if (!capable(CAP_SYS_ADMIN)) @@ -1258,7 +1275,7 @@ static int dvb_net_do_ioctl(struct inode *inode, struct file *file, { struct net_device *netdev; struct dvb_net_priv *priv_data; - struct dvb_net_if *dvbnetif=(struct dvb_net_if *)parg; + struct dvb_net_if *dvbnetif = parg; if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX || !dvbnet->state[dvbnetif->if_num]) @@ -1266,7 +1283,7 @@ static int dvb_net_do_ioctl(struct inode *inode, struct file *file, netdev = dvbnet->device[dvbnetif->if_num]; - priv_data=(struct dvb_net_priv*)netdev->priv; + priv_data = netdev->priv; dvbnetif->pid=priv_data->pid; dvbnetif->feedtype=priv_data->feedtype; break; @@ -1288,7 +1305,7 @@ static int dvb_net_do_ioctl(struct inode *inode, struct file *file, /* binary compatiblity cruft */ case __NET_ADD_IF_OLD: { - struct __dvb_net_if_old *dvbnetif=(struct __dvb_net_if_old *)parg; + struct __dvb_net_if_old *dvbnetif = parg; int result; if (!capable(CAP_SYS_ADMIN)) @@ -1309,7 +1326,7 @@ static int dvb_net_do_ioctl(struct inode *inode, struct file *file, { struct net_device *netdev; struct dvb_net_priv *priv_data; - struct __dvb_net_if_old *dvbnetif=(struct __dvb_net_if_old *)parg; + struct __dvb_net_if_old *dvbnetif = parg; if (dvbnetif->if_num >= DVB_NET_DEVICES_MAX || !dvbnet->state[dvbnetif->if_num]) @@ -1317,7 +1334,7 @@ static int dvb_net_do_ioctl(struct inode *inode, struct file *file, netdev = dvbnet->device[dvbnetif->if_num]; - priv_data=(struct dvb_net_priv*)netdev->priv; + priv_data = netdev->priv; dvbnetif->pid=priv_data->pid; break; } diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c index cf4ffe38fda..9d9662f4b8e 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.c +++ b/drivers/media/dvb/dvb-core/dvbdev.c @@ -286,9 +286,8 @@ skip: } -int dvb_register_adapter(struct dvb_adapter **padap, const char *name, struct module *module) +int dvb_register_adapter(struct dvb_adapter *adap, const char *name, struct module *module) { - struct dvb_adapter *adap; int num; if (down_interruptible (&dvbdev_register_lock)) @@ -299,11 +298,6 @@ int dvb_register_adapter(struct dvb_adapter **padap, const char *name, struct mo return -ENFILE; } - if (!(*padap = adap = kmalloc(sizeof(struct dvb_adapter), GFP_KERNEL))) { - up(&dvbdev_register_lock); - return -ENOMEM; - } - memset (adap, 0, sizeof(struct dvb_adapter)); INIT_LIST_HEAD (&adap->device_list); @@ -331,7 +325,6 @@ int dvb_unregister_adapter(struct dvb_adapter *adap) return -ERESTARTSYS; list_del (&adap->list_head); up (&dvbdev_register_lock); - kfree (adap); return 0; } EXPORT_SYMBOL(dvb_unregister_adapter); diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h index 184edba3caa..a251867f30f 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.h +++ b/drivers/media/dvb/dvb-core/dvbdev.h @@ -76,7 +76,7 @@ struct dvb_device { }; -extern int dvb_register_adapter (struct dvb_adapter **padap, const char *name, struct module *module); +extern int dvb_register_adapter (struct dvb_adapter *adap, const char *name, struct module *module); extern int dvb_unregister_adapter (struct dvb_adapter *adap); extern int dvb_register_device (struct dvb_adapter *adap, diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 0bfd4df17d0..75fb556ec01 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -12,10 +12,10 @@ config DVB_STV0299 config DVB_CX24110 tristate "Conexant CX24110 based" - depends on DVB_CORE - help + depends on DVB_CORE + help A DVB-S tuner module. Say Y when you want to support this frontend. - + config DVB_TDA8083 tristate "Philips TDA8083 based" depends on DVB_CORE @@ -127,8 +127,8 @@ comment "DVB-C (cable) frontends" config DVB_ATMEL_AT76C651 tristate "Atmel AT76C651 based" depends on DVB_CORE - help - A DVB-C tuner module. Say Y when you want to support this frontend. + help + A DVB-C tuner module. Say Y when you want to support this frontend. config DVB_VES1820 tristate "VLSI VES1820 based" @@ -158,10 +158,6 @@ config DVB_NXT2002 help An ATSC 8VSB tuner module. Say Y when you want to support this frontend. -config DVB_OR51132 - tristate "OR51132 based (pcHDTV)" - depends on DVB_CORE - config DVB_OR51211 tristate "or51211 based (pcHDTV HD2000 card)" depends on DVB_CORE @@ -169,4 +165,12 @@ config DVB_OR51211 help An ATSC 8VSB tuner module. Say Y when you want to support this frontend. +config DVB_OR51132 + tristate "OR51132 based (pcHDTV HD3000 card)" + depends on DVB_CORE + select FW_LOADER + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + endmenu diff --git a/drivers/media/dvb/frontends/at76c651.c b/drivers/media/dvb/frontends/at76c651.c index ce2eaa1640e..72a2b5455b0 100644 --- a/drivers/media/dvb/frontends/at76c651.c +++ b/drivers/media/dvb/frontends/at76c651.c @@ -259,7 +259,7 @@ static int at76c651_set_parameters(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { int ret; - struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv; + struct at76c651_state* state = fe->demodulator_priv; at76c651_writereg(state, 0x0c, 0xc3); state->config->pll_set(fe, p); @@ -276,7 +276,7 @@ static int at76c651_set_parameters(struct dvb_frontend* fe, static int at76c651_set_defaults(struct dvb_frontend* fe) { - struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv; + struct at76c651_state* state = fe->demodulator_priv; at76c651_set_symbol_rate(state, 6900000); at76c651_set_qam(state, QAM_64); @@ -294,7 +294,7 @@ static int at76c651_set_defaults(struct dvb_frontend* fe) static int at76c651_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv; + struct at76c651_state* state = fe->demodulator_priv; u8 sync; /* @@ -319,7 +319,7 @@ static int at76c651_read_status(struct dvb_frontend* fe, fe_status_t* status) static int at76c651_read_ber(struct dvb_frontend* fe, u32* ber) { - struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv; + struct at76c651_state* state = fe->demodulator_priv; *ber = (at76c651_readreg(state, 0x81) & 0x0F) << 16; *ber |= at76c651_readreg(state, 0x82) << 8; @@ -331,7 +331,7 @@ static int at76c651_read_ber(struct dvb_frontend* fe, u32* ber) static int at76c651_read_signal_strength(struct dvb_frontend* fe, u16* strength) { - struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv; + struct at76c651_state* state = fe->demodulator_priv; u8 gain = ~at76c651_readreg(state, 0x91); *strength = (gain << 8) | gain; @@ -341,7 +341,7 @@ static int at76c651_read_signal_strength(struct dvb_frontend* fe, u16* strength) static int at76c651_read_snr(struct dvb_frontend* fe, u16* snr) { - struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv; + struct at76c651_state* state = fe->demodulator_priv; *snr = 0xFFFF - ((at76c651_readreg(state, 0x8F) << 8) | @@ -352,7 +352,7 @@ static int at76c651_read_snr(struct dvb_frontend* fe, u16* snr) static int at76c651_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv; + struct at76c651_state* state = fe->demodulator_priv; *ucblocks = at76c651_readreg(state, 0x82); @@ -369,7 +369,7 @@ static int at76c651_get_tune_settings(struct dvb_frontend* fe, struct dvb_fronte static void at76c651_release(struct dvb_frontend* fe) { - struct at76c651_state* state = (struct at76c651_state*) fe->demodulator_priv; + struct at76c651_state* state = fe->demodulator_priv; kfree(state); } @@ -381,7 +381,7 @@ struct dvb_frontend* at76c651_attach(const struct at76c651_config* config, struct at76c651_state* state = NULL; /* allocate memory for the internal state */ - state = (struct at76c651_state*) kmalloc(sizeof(struct at76c651_state), GFP_KERNEL); + state = kmalloc(sizeof(struct at76c651_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c index a212279042b..0c2ed443861 100644 --- a/drivers/media/dvb/frontends/cx22700.c +++ b/drivers/media/dvb/frontends/cx22700.c @@ -232,7 +232,7 @@ static int cx22700_get_tps (struct cx22700_state* state, struct dvb_ofdm_paramet static int cx22700_init (struct dvb_frontend* fe) -{ struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv; +{ struct cx22700_state* state = fe->demodulator_priv; int i; dprintk("cx22700_init: init chip\n"); @@ -258,7 +258,7 @@ static int cx22700_init (struct dvb_frontend* fe) static int cx22700_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv; + struct cx22700_state* state = fe->demodulator_priv; u16 rs_ber = (cx22700_readreg (state, 0x0d) << 9) | (cx22700_readreg (state, 0x0e) << 1); @@ -286,7 +286,7 @@ static int cx22700_read_status(struct dvb_frontend* fe, fe_status_t* status) static int cx22700_read_ber(struct dvb_frontend* fe, u32* ber) { - struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv; + struct cx22700_state* state = fe->demodulator_priv; *ber = cx22700_readreg (state, 0x0c) & 0x7f; cx22700_writereg (state, 0x0c, 0x00); @@ -296,7 +296,7 @@ static int cx22700_read_ber(struct dvb_frontend* fe, u32* ber) static int cx22700_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) { - struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv; + struct cx22700_state* state = fe->demodulator_priv; u16 rs_ber = (cx22700_readreg (state, 0x0d) << 9) | (cx22700_readreg (state, 0x0e) << 1); @@ -307,7 +307,7 @@ static int cx22700_read_signal_strength(struct dvb_frontend* fe, u16* signal_str static int cx22700_read_snr(struct dvb_frontend* fe, u16* snr) { - struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv; + struct cx22700_state* state = fe->demodulator_priv; u16 rs_ber = (cx22700_readreg (state, 0x0d) << 9) | (cx22700_readreg (state, 0x0e) << 1); @@ -318,7 +318,7 @@ static int cx22700_read_snr(struct dvb_frontend* fe, u16* snr) static int cx22700_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv; + struct cx22700_state* state = fe->demodulator_priv; *ucblocks = cx22700_readreg (state, 0x0f); cx22700_writereg (state, 0x0f, 0x00); @@ -328,7 +328,7 @@ static int cx22700_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) static int cx22700_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv; + struct cx22700_state* state = fe->demodulator_priv; cx22700_writereg (state, 0x00, 0x02); /* XXX CHECKME: soft reset*/ cx22700_writereg (state, 0x00, 0x00); @@ -346,7 +346,7 @@ static int cx22700_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static int cx22700_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv; + struct cx22700_state* state = fe->demodulator_priv; u8 reg09 = cx22700_readreg (state, 0x09); p->inversion = reg09 & 0x1 ? INVERSION_ON : INVERSION_OFF; @@ -363,7 +363,7 @@ static int cx22700_get_tune_settings(struct dvb_frontend* fe, struct dvb_fronten static void cx22700_release(struct dvb_frontend* fe) { - struct cx22700_state* state = (struct cx22700_state*) fe->demodulator_priv; + struct cx22700_state* state = fe->demodulator_priv; kfree(state); } @@ -375,7 +375,7 @@ struct dvb_frontend* cx22700_attach(const struct cx22700_config* config, struct cx22700_state* state = NULL; /* allocate memory for the internal state */ - state = (struct cx22700_state*) kmalloc(sizeof(struct cx22700_state), GFP_KERNEL); + state = kmalloc(sizeof(struct cx22700_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c index 011860ce36c..f4aa44136c7 100644 --- a/drivers/media/dvb/frontends/cx22702.c +++ b/drivers/media/dvb/frontends/cx22702.c @@ -200,7 +200,7 @@ static int cx22702_get_tps (struct cx22702_state *state, struct dvb_ofdm_paramet static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { u8 val; - struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv; + struct cx22702_state* state = fe->demodulator_priv; /* set PLL */ cx22702_writereg (state, 0x0D, cx22702_readreg(state,0x0D) &0xfe); @@ -338,7 +338,7 @@ static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_paramet static int cx22702_init (struct dvb_frontend* fe) { int i; - struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv; + struct cx22702_state* state = fe->demodulator_priv; cx22702_writereg (state, 0x00, 0x02); @@ -360,7 +360,7 @@ static int cx22702_init (struct dvb_frontend* fe) static int cx22702_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv; + struct cx22702_state* state = fe->demodulator_priv; u8 reg0A; u8 reg23; @@ -389,7 +389,7 @@ static int cx22702_read_status(struct dvb_frontend* fe, fe_status_t* status) static int cx22702_read_ber(struct dvb_frontend* fe, u32* ber) { - struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv; + struct cx22702_state* state = fe->demodulator_priv; if(cx22702_readreg (state, 0xE4) & 0x02) { /* Realtime statistics */ @@ -406,7 +406,7 @@ static int cx22702_read_ber(struct dvb_frontend* fe, u32* ber) static int cx22702_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) { - struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv; + struct cx22702_state* state = fe->demodulator_priv; *signal_strength = cx22702_readreg (state, 0x23); @@ -415,7 +415,7 @@ static int cx22702_read_signal_strength(struct dvb_frontend* fe, u16* signal_str static int cx22702_read_snr(struct dvb_frontend* fe, u16* snr) { - struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv; + struct cx22702_state* state = fe->demodulator_priv; u16 rs_ber=0; if(cx22702_readreg (state, 0xE4) & 0x02) { @@ -434,7 +434,7 @@ static int cx22702_read_snr(struct dvb_frontend* fe, u16* snr) static int cx22702_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv; + struct cx22702_state* state = fe->demodulator_priv; u8 _ucblocks; @@ -449,7 +449,7 @@ static int cx22702_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) static int cx22702_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv; + struct cx22702_state* state = fe->demodulator_priv; u8 reg0C = cx22702_readreg (state, 0x0C); @@ -459,7 +459,7 @@ static int cx22702_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static void cx22702_release(struct dvb_frontend* fe) { - struct cx22702_state* state = (struct cx22702_state*) fe->demodulator_priv; + struct cx22702_state* state = fe->demodulator_priv; kfree(state); } @@ -471,7 +471,7 @@ struct dvb_frontend* cx22702_attach(const struct cx22702_config* config, struct cx22702_state* state = NULL; /* allocate memory for the internal state */ - state = (struct cx22702_state*) kmalloc(sizeof(struct cx22702_state), GFP_KERNEL); + state = kmalloc(sizeof(struct cx22702_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c index ae16112a065..8222b88cb48 100644 --- a/drivers/media/dvb/frontends/cx24110.c +++ b/drivers/media/dvb/frontends/cx24110.c @@ -315,7 +315,7 @@ dprintk("cx24110 debug: entering %s(%d)\n",__FUNCTION__,srate); int cx24110_pll_write (struct dvb_frontend* fe, u32 data) { - struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv; + struct cx24110_state *state = fe->demodulator_priv; /* tuner data is 21 bits long, must be left-aligned in data */ /* tuner cx24108 is written through a dedicated 3wire interface on the demod chip */ @@ -356,7 +356,7 @@ int cx24110_pll_write (struct dvb_frontend* fe, u32 data) static int cx24110_initfe(struct dvb_frontend* fe) { - struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv; + struct cx24110_state *state = fe->demodulator_priv; /* fixme (low): error handling */ int i; @@ -373,7 +373,7 @@ static int cx24110_initfe(struct dvb_frontend* fe) static int cx24110_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage) { - struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv; + struct cx24110_state *state = fe->demodulator_priv; switch (voltage) { case SEC_VOLTAGE_13: @@ -385,8 +385,7 @@ static int cx24110_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltag }; } -static int cx24110_diseqc_send_burst(struct dvb_frontend* fe, - fe_sec_mini_cmd_t burst) +static int cx24110_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) { int rv, bit, i; struct cx24110_state *state = fe->demodulator_priv; @@ -413,7 +412,7 @@ static int cx24110_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd) { int i, rv; - struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv; + struct cx24110_state *state = fe->demodulator_priv; for (i = 0; i < cmd->msg_len; i++) cx24110_writereg(state, 0x79 + i, cmd->msg[i]); @@ -432,7 +431,7 @@ static int cx24110_send_diseqc_msg(struct dvb_frontend* fe, static int cx24110_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv; + struct cx24110_state *state = fe->demodulator_priv; int sync = cx24110_readreg (state, 0x55); @@ -460,7 +459,7 @@ static int cx24110_read_status(struct dvb_frontend* fe, fe_status_t* status) static int cx24110_read_ber(struct dvb_frontend* fe, u32* ber) { - struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv; + struct cx24110_state *state = fe->demodulator_priv; /* fixme (maybe): value range is 16 bit. Scale? */ if(cx24110_readreg(state,0x24)&0x10) { @@ -478,7 +477,7 @@ static int cx24110_read_ber(struct dvb_frontend* fe, u32* ber) static int cx24110_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) { - struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv; + struct cx24110_state *state = fe->demodulator_priv; /* no provision in hardware. Read the frontend AGC accumulator. No idea how to scale this, but I know it is 2s complement */ u8 signal = cx24110_readreg (state, 0x27)+128; @@ -489,7 +488,7 @@ static int cx24110_read_signal_strength(struct dvb_frontend* fe, u16* signal_str static int cx24110_read_snr(struct dvb_frontend* fe, u16* snr) { - struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv; + struct cx24110_state *state = fe->demodulator_priv; /* no provision in hardware. Can be computed from the Es/N0 estimator, but I don't know how. */ if(cx24110_readreg(state,0x6a)&0x80) { @@ -505,7 +504,7 @@ static int cx24110_read_snr(struct dvb_frontend* fe, u16* snr) static int cx24110_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv; + struct cx24110_state *state = fe->demodulator_priv; u32 lastbyer; if(cx24110_readreg(state,0x10)&0x40) { @@ -527,7 +526,7 @@ static int cx24110_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) static int cx24110_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv; + struct cx24110_state *state = fe->demodulator_priv; state->config->pll_set(fe, p); cx24110_set_inversion (state, p->inversion); @@ -540,7 +539,7 @@ static int cx24110_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static int cx24110_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv; + struct cx24110_state *state = fe->demodulator_priv; s32 afc; unsigned sclk; /* cannot read back tuner settings (freq). Need to have some private storage */ @@ -567,14 +566,14 @@ static int cx24110_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static int cx24110_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) { - struct cx24110_state *state = (struct cx24110_state*) fe->demodulator_priv; + struct cx24110_state *state = fe->demodulator_priv; return cx24110_writereg(state,0x76,(cx24110_readreg(state,0x76)&~0x10)|(((tone==SEC_TONE_ON))?0x10:0)); } static void cx24110_release(struct dvb_frontend* fe) { - struct cx24110_state* state = (struct cx24110_state*) fe->demodulator_priv; + struct cx24110_state* state = fe->demodulator_priv; kfree(state); } @@ -587,7 +586,7 @@ struct dvb_frontend* cx24110_attach(const struct cx24110_config* config, int ret; /* allocate memory for the internal state */ - state = (struct cx24110_state*) kmalloc(sizeof(struct cx24110_state), GFP_KERNEL); + state = kmalloc(sizeof(struct cx24110_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c index a853d12a26f..6f52d649e97 100644 --- a/drivers/media/dvb/frontends/dib3000mb.c +++ b/drivers/media/dvb/frontends/dib3000mb.c @@ -56,12 +56,12 @@ static int dib3000mb_get_frontend(struct dvb_frontend* fe, static int dib3000mb_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep, int tuner) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm; fe_code_rate_t fe_cr = FEC_NONE; int search_state, seq; - if (tuner) { + if (tuner && state->config.pll_addr && state->config.pll_set) { dib3000mb_tuner_pass_ctrl(fe,1,state->config.pll_addr(fe)); state->config.pll_set(fe, fep, NULL); dib3000mb_tuner_pass_ctrl(fe,0,state->config.pll_addr(fe)); @@ -317,7 +317,7 @@ static int dib3000mb_set_frontend(struct dvb_frontend* fe, static int dib3000mb_fe_init(struct dvb_frontend* fe, int mobile_mode) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; deb_info("dib3000mb is getting up.\n"); wr(DIB3000MB_REG_POWER_CONTROL, DIB3000MB_POWER_UP); @@ -401,7 +401,7 @@ static int dib3000mb_fe_init(struct dvb_frontend* fe, int mobile_mode) static int dib3000mb_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm; fe_code_rate_t *cr; u16 tps_val; @@ -562,7 +562,7 @@ static int dib3000mb_get_frontend(struct dvb_frontend* fe, static int dib3000mb_read_status(struct dvb_frontend* fe, fe_status_t *stat) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; *stat = 0; @@ -594,7 +594,7 @@ static int dib3000mb_read_status(struct dvb_frontend* fe, fe_status_t *stat) static int dib3000mb_read_ber(struct dvb_frontend* fe, u32 *ber) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; *ber = ((rd(DIB3000MB_REG_BER_MSB) << 16) | rd(DIB3000MB_REG_BER_LSB)); return 0; @@ -603,7 +603,7 @@ static int dib3000mb_read_ber(struct dvb_frontend* fe, u32 *ber) /* see dib3000-watch dvb-apps for exact calcuations of signal_strength and snr */ static int dib3000mb_read_signal_strength(struct dvb_frontend* fe, u16 *strength) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; *strength = rd(DIB3000MB_REG_SIGNAL_POWER) * 0xffff / 0x170; return 0; @@ -611,7 +611,7 @@ static int dib3000mb_read_signal_strength(struct dvb_frontend* fe, u16 *strength static int dib3000mb_read_snr(struct dvb_frontend* fe, u16 *snr) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; short sigpow = rd(DIB3000MB_REG_SIGNAL_POWER); int icipow = ((rd(DIB3000MB_REG_NOISE_POWER_MSB) & 0xff) << 16) | rd(DIB3000MB_REG_NOISE_POWER_LSB); @@ -621,7 +621,7 @@ static int dib3000mb_read_snr(struct dvb_frontend* fe, u16 *snr) static int dib3000mb_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; *unc = rd(DIB3000MB_REG_UNC); return 0; @@ -629,7 +629,7 @@ static int dib3000mb_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) static int dib3000mb_sleep(struct dvb_frontend* fe) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; deb_info("dib3000mb is going to bed.\n"); wr(DIB3000MB_REG_POWER_CONTROL, DIB3000MB_POWER_DOWN); return 0; @@ -656,7 +656,7 @@ static int dib3000mb_set_frontend_and_tuner(struct dvb_frontend* fe, struct dvb_ static void dib3000mb_release(struct dvb_frontend* fe) { - struct dib3000_state *state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state *state = fe->demodulator_priv; kfree(state); } @@ -671,7 +671,7 @@ static int dib3000mb_pid_control(struct dvb_frontend *fe,int index, int pid,int static int dib3000mb_fifo_control(struct dvb_frontend *fe, int onoff) { - struct dib3000_state *state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state *state = fe->demodulator_priv; deb_xfer("%s fifo\n",onoff ? "enabling" : "disabling"); if (onoff) { @@ -692,7 +692,7 @@ static int dib3000mb_pid_parse(struct dvb_frontend *fe, int onoff) static int dib3000mb_tuner_pass_ctrl(struct dvb_frontend *fe, int onoff, u8 pll_addr) { - struct dib3000_state *state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state *state = fe->demodulator_priv; if (onoff) { wr(DIB3000MB_REG_TUNER, DIB3000_TUNER_WRITE_ENABLE(pll_addr)); } else { @@ -709,7 +709,7 @@ struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config, struct dib3000_state* state = NULL; /* allocate memory for the internal state */ - state = (struct dib3000_state*) kmalloc(sizeof(struct dib3000_state), GFP_KERNEL); + state = kmalloc(sizeof(struct dib3000_state), GFP_KERNEL); if (state == NULL) goto error; memset(state,0,sizeof(struct dib3000_state)); diff --git a/drivers/media/dvb/frontends/dib3000mc.c b/drivers/media/dvb/frontends/dib3000mc.c index 4a31c05eaec..888f10a5e96 100644 --- a/drivers/media/dvb/frontends/dib3000mc.c +++ b/drivers/media/dvb/frontends/dib3000mc.c @@ -297,7 +297,7 @@ static int dib3000mc_set_general_cfg(struct dib3000_state *state, struct dvb_fro static int dib3000mc_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm; fe_code_rate_t *cr; u16 tps_val,cr_val; @@ -458,12 +458,12 @@ static int dib3000mc_get_frontend(struct dvb_frontend* fe, static int dib3000mc_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep, int tuner) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; struct dvb_ofdm_parameters *ofdm = &fep->u.ofdm; int search_state,auto_val; u16 val; - if (tuner) { /* initial call from dvb */ + if (tuner && state->config.pll_addr && state->config.pll_set) { /* initial call from dvb */ dib3000mc_tuner_pass_ctrl(fe,1,state->config.pll_addr(fe)); state->config.pll_set(fe,fep,NULL); dib3000mc_tuner_pass_ctrl(fe,0,state->config.pll_addr(fe)); @@ -659,7 +659,7 @@ static int dib3000mc_fe_init(struct dvb_frontend* fe, int mobile_mode) } static int dib3000mc_read_status(struct dvb_frontend* fe, fe_status_t *stat) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; u16 lock = rd(DIB3000MC_REG_LOCKING); *stat = 0; @@ -679,14 +679,14 @@ static int dib3000mc_read_status(struct dvb_frontend* fe, fe_status_t *stat) static int dib3000mc_read_ber(struct dvb_frontend* fe, u32 *ber) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; *ber = ((rd(DIB3000MC_REG_BER_MSB) << 16) | rd(DIB3000MC_REG_BER_LSB)); return 0; } static int dib3000mc_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; *unc = rd(DIB3000MC_REG_PACKET_ERROR_COUNT); return 0; @@ -695,7 +695,7 @@ static int dib3000mc_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) /* see dib3000mb.c for calculation comments */ static int dib3000mc_read_signal_strength(struct dvb_frontend* fe, u16 *strength) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; u16 val = rd(DIB3000MC_REG_SIGNAL_NOISE_LSB); *strength = (((val >> 6) & 0xff) << 8) + (val & 0x3f); @@ -706,7 +706,7 @@ static int dib3000mc_read_signal_strength(struct dvb_frontend* fe, u16 *strength /* see dib3000mb.c for calculation comments */ static int dib3000mc_read_snr(struct dvb_frontend* fe, u16 *snr) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; u16 val = rd(DIB3000MC_REG_SIGNAL_NOISE_LSB), val2 = rd(DIB3000MC_REG_SIGNAL_NOISE_MSB); u16 sig,noise; @@ -726,7 +726,7 @@ static int dib3000mc_read_snr(struct dvb_frontend* fe, u16 *snr) static int dib3000mc_sleep(struct dvb_frontend* fe) { - struct dib3000_state* state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state* state = fe->demodulator_priv; set_or(DIB3000MC_REG_CLK_CFG_7,DIB3000MC_CLK_CFG_7_PWR_DOWN); wr(DIB3000MC_REG_CLK_CFG_1,DIB3000MC_CLK_CFG_1_POWER_DOWN); @@ -756,7 +756,7 @@ static int dib3000mc_set_frontend_and_tuner(struct dvb_frontend* fe, struct dvb_ static void dib3000mc_release(struct dvb_frontend* fe) { - struct dib3000_state *state = (struct dib3000_state *) fe->demodulator_priv; + struct dib3000_state *state = fe->demodulator_priv; kfree(state); } @@ -771,7 +771,7 @@ static int dib3000mc_pid_control(struct dvb_frontend *fe,int index, int pid,int static int dib3000mc_fifo_control(struct dvb_frontend *fe, int onoff) { - struct dib3000_state *state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state *state = fe->demodulator_priv; u16 tmp = rd(DIB3000MC_REG_SMO_MODE); deb_xfer("%s fifo\n",onoff ? "enabling" : "disabling"); @@ -803,7 +803,7 @@ static int dib3000mc_pid_parse(struct dvb_frontend *fe, int onoff) static int dib3000mc_tuner_pass_ctrl(struct dvb_frontend *fe, int onoff, u8 pll_addr) { - struct dib3000_state *state = (struct dib3000_state*) fe->demodulator_priv; + struct dib3000_state *state = fe->demodulator_priv; if (onoff) { wr(DIB3000MC_REG_TUNER, DIB3000_TUNER_WRITE_ENABLE(pll_addr)); } else { @@ -844,7 +844,7 @@ struct dvb_frontend* dib3000mc_attach(const struct dib3000_config* config, u16 devid; /* allocate memory for the internal state */ - state = (struct dib3000_state*) kmalloc(sizeof(struct dib3000_state), GFP_KERNEL); + state = kmalloc(sizeof(struct dib3000_state), GFP_KERNEL); if (state == NULL) goto error; memset(state,0,sizeof(struct dib3000_state)); diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h index 016c794a567..c4c3c56c4a8 100644 --- a/drivers/media/dvb/frontends/dvb-pll.h +++ b/drivers/media/dvb/frontends/dvb-pll.h @@ -2,6 +2,9 @@ * $Id: dvb-pll.h,v 1.2 2005/02/10 11:43:41 kraxel Exp $ */ +#ifndef __DVB_PLL_H__ +#define __DVB_PLL_H__ + struct dvb_pll_desc { char *name; u32 min; @@ -26,9 +29,4 @@ extern struct dvb_pll_desc dvb_pll_unknown_1; int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf, u32 freq, int bandwidth); -/* - * Local variables: - * c-basic-offset: 8 - * compile-command: "make DVB=1" - * End: - */ +#endif diff --git a/drivers/media/dvb/frontends/dvb_dummy_fe.c b/drivers/media/dvb/frontends/dvb_dummy_fe.c index c05a9b05600..cff93b9d8ab 100644 --- a/drivers/media/dvb/frontends/dvb_dummy_fe.c +++ b/drivers/media/dvb/frontends/dvb_dummy_fe.c @@ -100,7 +100,7 @@ static int dvb_dummy_fe_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t vo static void dvb_dummy_fe_release(struct dvb_frontend* fe) { - struct dvb_dummy_fe_state* state = (struct dvb_dummy_fe_state*) fe->demodulator_priv; + struct dvb_dummy_fe_state* state = fe->demodulator_priv; kfree(state); } @@ -111,7 +111,7 @@ struct dvb_frontend* dvb_dummy_fe_ofdm_attach(void) struct dvb_dummy_fe_state* state = NULL; /* allocate memory for the internal state */ - state = (struct dvb_dummy_fe_state*) kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL); + state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ @@ -134,7 +134,7 @@ struct dvb_frontend* dvb_dummy_fe_qpsk_attach() struct dvb_dummy_fe_state* state = NULL; /* allocate memory for the internal state */ - state = (struct dvb_dummy_fe_state*) kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL); + state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ @@ -157,7 +157,7 @@ struct dvb_frontend* dvb_dummy_fe_qam_attach() struct dvb_dummy_fe_state* state = NULL; /* allocate memory for the internal state */ - state = (struct dvb_dummy_fe_state*) kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL); + state = kmalloc(sizeof(struct dvb_dummy_fe_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c index 9ac95de9834..031a1ddc7d1 100644 --- a/drivers/media/dvb/frontends/l64781.c +++ b/drivers/media/dvb/frontends/l64781.c @@ -121,7 +121,7 @@ static int reset_and_configure (struct l64781_state* state) static int apply_frontend_param (struct dvb_frontend* fe, struct dvb_frontend_parameters *param) { - struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv; + struct l64781_state* state = fe->demodulator_priv; /* The coderates for FEC_NONE, FEC_4_5 and FEC_FEC_6_7 are arbitrary */ static const u8 fec_tab[] = { 7, 0, 1, 2, 9, 3, 10, 4 }; /* QPSK, QAM_16, QAM_64 */ @@ -234,7 +234,7 @@ static int apply_frontend_param (struct dvb_frontend* fe, struct dvb_frontend_pa static int get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters* param) { - struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv; + struct l64781_state* state = fe->demodulator_priv; int tmp; @@ -352,7 +352,7 @@ static int get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters* static int l64781_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv; + struct l64781_state* state = fe->demodulator_priv; int sync = l64781_readreg (state, 0x32); int gain = l64781_readreg (state, 0x0e); @@ -381,7 +381,7 @@ static int l64781_read_status(struct dvb_frontend* fe, fe_status_t* status) static int l64781_read_ber(struct dvb_frontend* fe, u32* ber) { - struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv; + struct l64781_state* state = fe->demodulator_priv; /* XXX FIXME: set up counting period (reg 0x26...0x28) */ @@ -393,7 +393,7 @@ static int l64781_read_ber(struct dvb_frontend* fe, u32* ber) static int l64781_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) { - struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv; + struct l64781_state* state = fe->demodulator_priv; u8 gain = l64781_readreg (state, 0x0e); *signal_strength = (gain << 8) | gain; @@ -403,7 +403,7 @@ static int l64781_read_signal_strength(struct dvb_frontend* fe, u16* signal_stre static int l64781_read_snr(struct dvb_frontend* fe, u16* snr) { - struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv; + struct l64781_state* state = fe->demodulator_priv; u8 avg_quality = 0xff - l64781_readreg (state, 0x33); *snr = (avg_quality << 8) | avg_quality; /* not exact, but...*/ @@ -413,7 +413,7 @@ static int l64781_read_snr(struct dvb_frontend* fe, u16* snr) static int l64781_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv; + struct l64781_state* state = fe->demodulator_priv; *ucblocks = l64781_readreg (state, 0x37) | (l64781_readreg (state, 0x38) << 8); @@ -423,7 +423,7 @@ static int l64781_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) static int l64781_sleep(struct dvb_frontend* fe) { - struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv; + struct l64781_state* state = fe->demodulator_priv; /* Power down */ return l64781_writereg (state, 0x3e, 0x5a); @@ -431,7 +431,7 @@ static int l64781_sleep(struct dvb_frontend* fe) static int l64781_init(struct dvb_frontend* fe) { - struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv; + struct l64781_state* state = fe->demodulator_priv; reset_and_configure (state); @@ -484,7 +484,7 @@ static int l64781_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend static void l64781_release(struct dvb_frontend* fe) { - struct l64781_state* state = (struct l64781_state*) fe->demodulator_priv; + struct l64781_state* state = fe->demodulator_priv; kfree(state); } @@ -501,7 +501,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config, { .addr = config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; /* allocate memory for the internal state */ - state = (struct l64781_state*) kmalloc(sizeof(struct l64781_state), GFP_KERNEL); + state = kmalloc(sizeof(struct l64781_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c index 176a22e3441..e455aecd76b 100644 --- a/drivers/media/dvb/frontends/mt312.c +++ b/drivers/media/dvb/frontends/mt312.c @@ -226,7 +226,7 @@ static int mt312_get_code_rate(struct mt312_state* state, fe_code_rate_t *cr) static int mt312_initfe(struct dvb_frontend* fe) { - struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv; + struct mt312_state *state = fe->demodulator_priv; int ret; u8 buf[2]; @@ -287,7 +287,7 @@ static int mt312_initfe(struct dvb_frontend* fe) static int mt312_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *c) { - struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv; + struct mt312_state *state = fe->demodulator_priv; int ret; u8 diseqc_mode; @@ -318,7 +318,7 @@ static int mt312_send_master_cmd(struct dvb_frontend* fe, static int mt312_send_burst(struct dvb_frontend* fe, const fe_sec_mini_cmd_t c) { - struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv; + struct mt312_state *state = fe->demodulator_priv; const u8 mini_tab[2] = { 0x02, 0x03 }; int ret; @@ -340,7 +340,7 @@ static int mt312_send_burst(struct dvb_frontend* fe, const fe_sec_mini_cmd_t c) static int mt312_set_tone(struct dvb_frontend* fe, const fe_sec_tone_mode_t t) { - struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv; + struct mt312_state *state = fe->demodulator_priv; const u8 tone_tab[2] = { 0x01, 0x00 }; int ret; @@ -362,7 +362,7 @@ static int mt312_set_tone(struct dvb_frontend* fe, const fe_sec_tone_mode_t t) static int mt312_set_voltage(struct dvb_frontend* fe, const fe_sec_voltage_t v) { - struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv; + struct mt312_state *state = fe->demodulator_priv; const u8 volt_tab[3] = { 0x00, 0x40, 0x00 }; if (v > SEC_VOLTAGE_OFF) @@ -373,7 +373,7 @@ static int mt312_set_voltage(struct dvb_frontend* fe, const fe_sec_voltage_t v) static int mt312_read_status(struct dvb_frontend* fe, fe_status_t *s) { - struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv; + struct mt312_state *state = fe->demodulator_priv; int ret; u8 status[3]; @@ -400,7 +400,7 @@ static int mt312_read_status(struct dvb_frontend* fe, fe_status_t *s) static int mt312_read_ber(struct dvb_frontend* fe, u32 *ber) { - struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv; + struct mt312_state *state = fe->demodulator_priv; int ret; u8 buf[3]; @@ -414,7 +414,7 @@ static int mt312_read_ber(struct dvb_frontend* fe, u32 *ber) static int mt312_read_signal_strength(struct dvb_frontend* fe, u16 *signal_strength) { - struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv; + struct mt312_state *state = fe->demodulator_priv; int ret; u8 buf[3]; u16 agc; @@ -435,7 +435,7 @@ static int mt312_read_signal_strength(struct dvb_frontend* fe, u16 *signal_stren static int mt312_read_snr(struct dvb_frontend* fe, u16 *snr) { - struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv; + struct mt312_state *state = fe->demodulator_priv; int ret; u8 buf[2]; @@ -449,7 +449,7 @@ static int mt312_read_snr(struct dvb_frontend* fe, u16 *snr) static int mt312_read_ucblocks(struct dvb_frontend* fe, u32 *ubc) { - struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv; + struct mt312_state *state = fe->demodulator_priv; int ret; u8 buf[2]; @@ -464,7 +464,7 @@ static int mt312_read_ucblocks(struct dvb_frontend* fe, u32 *ubc) static int mt312_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv; + struct mt312_state *state = fe->demodulator_priv; int ret; u8 buf[5], config_val; u16 sr; @@ -560,7 +560,7 @@ static int mt312_set_frontend(struct dvb_frontend* fe, static int mt312_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv; + struct mt312_state *state = fe->demodulator_priv; int ret; if ((ret = mt312_get_inversion(state, &p->inversion)) < 0) @@ -577,7 +577,7 @@ static int mt312_get_frontend(struct dvb_frontend* fe, static int mt312_sleep(struct dvb_frontend* fe) { - struct mt312_state *state = (struct mt312_state*) fe->demodulator_priv; + struct mt312_state *state = fe->demodulator_priv; int ret; u8 config; @@ -605,7 +605,7 @@ static int mt312_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_ static void mt312_release(struct dvb_frontend* fe) { - struct mt312_state* state = (struct mt312_state*) fe->demodulator_priv; + struct mt312_state* state = fe->demodulator_priv; kfree(state); } @@ -617,7 +617,7 @@ struct dvb_frontend* vp310_attach(const struct mt312_config* config, struct mt312_state* state = NULL; /* allocate memory for the internal state */ - state = (struct mt312_state*) kmalloc(sizeof(struct mt312_state), GFP_KERNEL); + state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL); if (state == NULL) goto error; @@ -651,7 +651,7 @@ struct dvb_frontend* mt312_attach(const struct mt312_config* config, struct mt312_state* state = NULL; /* allocate memory for the internal state */ - state = (struct mt312_state*) kmalloc(sizeof(struct mt312_state), GFP_KERNEL); + state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL); if (state == NULL) goto error; diff --git a/drivers/media/dvb/frontends/mt352.c b/drivers/media/dvb/frontends/mt352.c index 50326c7248f..d32dc4de9e7 100644 --- a/drivers/media/dvb/frontends/mt352.c +++ b/drivers/media/dvb/frontends/mt352.c @@ -46,7 +46,7 @@ struct mt352_state { struct dvb_frontend_ops ops; /* configuration settings */ - const struct mt352_config* config; + struct mt352_config config; }; static int debug; @@ -59,7 +59,7 @@ static int mt352_single_write(struct dvb_frontend *fe, u8 reg, u8 val) { struct mt352_state* state = fe->demodulator_priv; u8 buf[2] = { reg, val }; - struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, + struct i2c_msg msg = { .addr = state->config.demod_address, .flags = 0, .buf = buf, .len = 2 }; int err = i2c_transfer(state->i2c, &msg, 1); if (err != 1) { @@ -84,10 +84,10 @@ static int mt352_read_register(struct mt352_state* state, u8 reg) int ret; u8 b0 [] = { reg }; u8 b1 [] = { 0 }; - struct i2c_msg msg [] = { { .addr = state->config->demod_address, + struct i2c_msg msg [] = { { .addr = state->config.demod_address, .flags = 0, .buf = b0, .len = 1 }, - { .addr = state->config->demod_address, + { .addr = state->config.demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; @@ -102,11 +102,6 @@ static int mt352_read_register(struct mt352_state* state, u8 reg) return b1[0]; } -int mt352_read(struct dvb_frontend *fe, u8 reg) -{ - return mt352_read_register(fe->demodulator_priv,reg); -} - static int mt352_sleep(struct dvb_frontend* fe) { static u8 mt352_softdown[] = { CLOCK_CTL, 0x20, 0x08 }; @@ -134,8 +129,8 @@ static void mt352_calc_nominal_rate(struct mt352_state* state, bw = 8; break; } - if (state->config->adc_clock) - adc_clock = state->config->adc_clock; + if (state->config.adc_clock) + adc_clock = state->config.adc_clock; value = 64 * bw * (1<<16) / (7 * 8); value = value * 1000 / adc_clock; @@ -152,10 +147,10 @@ static void mt352_calc_input_freq(struct mt352_state* state, int if2 = 36167; /* 36.166667 MHz */ int ife,value; - if (state->config->adc_clock) - adc_clock = state->config->adc_clock; - if (state->config->if2) - if2 = state->config->if2; + if (state->config.adc_clock) + adc_clock = state->config.adc_clock; + if (state->config.if2) + if2 = state->config.if2; ife = (2*adc_clock - if2); value = -16374 * ife / adc_clock; @@ -289,10 +284,10 @@ static int mt352_set_parameters(struct dvb_frontend* fe, mt352_calc_nominal_rate(state, op->bandwidth, buf+4); mt352_calc_input_freq(state, buf+6); - state->config->pll_set(fe, param, buf+8); + state->config.pll_set(fe, param, buf+8); mt352_write(fe, buf, sizeof(buf)); - if (state->config->no_tuner) { + if (state->config.no_tuner) { /* start decoding */ mt352_write(fe, fsm_go, 2); } else { @@ -516,7 +511,7 @@ static int mt352_init(struct dvb_frontend* fe) /* Do a "hard" reset */ mt352_write(fe, mt352_reset_attach, sizeof(mt352_reset_attach)); - return state->config->demod_init(fe); + return state->config.demod_init(fe); } return 0; @@ -541,8 +536,8 @@ struct dvb_frontend* mt352_attach(const struct mt352_config* config, memset(state,0,sizeof(*state)); /* setup the state */ - state->config = config; state->i2c = i2c; + memcpy(&state->config,config,sizeof(struct mt352_config)); memcpy(&state->ops, &mt352_ops, sizeof(struct dvb_frontend_ops)); /* check if the demod is there */ @@ -601,10 +596,3 @@ MODULE_LICENSE("GPL"); EXPORT_SYMBOL(mt352_attach); EXPORT_SYMBOL(mt352_write); -EXPORT_SYMBOL(mt352_read); -/* - * Local variables: - * c-basic-offset: 8 - * compile-command: "make DVB=1" - * End: - */ diff --git a/drivers/media/dvb/frontends/mt352.h b/drivers/media/dvb/frontends/mt352.h index f5d8a5aed8a..03040cd595b 100644 --- a/drivers/media/dvb/frontends/mt352.h +++ b/drivers/media/dvb/frontends/mt352.h @@ -61,12 +61,5 @@ extern struct dvb_frontend* mt352_attach(const struct mt352_config* config, struct i2c_adapter* i2c); extern int mt352_write(struct dvb_frontend* fe, u8* ibuf, int ilen); -extern int mt352_read(struct dvb_frontend *fe, u8 reg); #endif // MT352_H - -/* - * Local variables: - * c-basic-offset: 8 - * End: - */ diff --git a/drivers/media/dvb/frontends/nxt2002.c b/drivers/media/dvb/frontends/nxt2002.c index 4743aa17406..35a1d60f192 100644 --- a/drivers/media/dvb/frontends/nxt2002.c +++ b/drivers/media/dvb/frontends/nxt2002.c @@ -241,7 +241,7 @@ static void nxt2002_agc_reset(struct nxt2002_state* state) static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) { - struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv; + struct nxt2002_state* state = fe->demodulator_priv; u8 buf[256],written = 0,chunkpos = 0; u16 rambase,position,crc = 0; @@ -309,7 +309,7 @@ static int nxt2002_load_firmware (struct dvb_frontend* fe, const struct firmware static int nxt2002_setup_frontend_parameters (struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv; + struct nxt2002_state* state = fe->demodulator_priv; u32 freq = 0; u16 tunerfreq = 0; u8 buf[4]; @@ -343,8 +343,6 @@ static int nxt2002_setup_frontend_parameters (struct dvb_frontend* fe, /* reset the agc now that tuning has been completed */ nxt2002_agc_reset(state); - - /* set target power level */ switch (p->u.vsb.modulation) { case QAM_64: @@ -453,7 +451,7 @@ static int nxt2002_setup_frontend_parameters (struct dvb_frontend* fe, static int nxt2002_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv; + struct nxt2002_state* state = fe->demodulator_priv; u8 lock; i2c_readbytes(state,0x31,&lock,1); @@ -470,7 +468,7 @@ static int nxt2002_read_status(struct dvb_frontend* fe, fe_status_t* status) static int nxt2002_read_ber(struct dvb_frontend* fe, u32* ber) { - struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv; + struct nxt2002_state* state = fe->demodulator_priv; u8 b[3]; nxt2002_readreg_multibyte(state,0xE6,b,3); @@ -482,7 +480,7 @@ static int nxt2002_read_ber(struct dvb_frontend* fe, u32* ber) static int nxt2002_read_signal_strength(struct dvb_frontend* fe, u16* strength) { - struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv; + struct nxt2002_state* state = fe->demodulator_priv; u8 b[2]; u16 temp = 0; @@ -502,7 +500,7 @@ static int nxt2002_read_signal_strength(struct dvb_frontend* fe, u16* strength) static int nxt2002_read_snr(struct dvb_frontend* fe, u16* snr) { - struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv; + struct nxt2002_state* state = fe->demodulator_priv; u8 b[2]; u16 temp = 0, temp2; u32 snrdb = 0; @@ -536,7 +534,7 @@ static int nxt2002_read_snr(struct dvb_frontend* fe, u16* snr) static int nxt2002_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv; + struct nxt2002_state* state = fe->demodulator_priv; u8 b[3]; nxt2002_readreg_multibyte(state,0xE6,b,3); @@ -552,7 +550,7 @@ static int nxt2002_sleep(struct dvb_frontend* fe) static int nxt2002_init(struct dvb_frontend* fe) { - struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv; + struct nxt2002_state* state = fe->demodulator_priv; const struct firmware *fw; int ret; u8 buf[2]; @@ -624,7 +622,7 @@ static int nxt2002_get_tune_settings(struct dvb_frontend* fe, struct dvb_fronten static void nxt2002_release(struct dvb_frontend* fe) { - struct nxt2002_state* state = (struct nxt2002_state*) fe->demodulator_priv; + struct nxt2002_state* state = fe->demodulator_priv; kfree(state); } @@ -637,7 +635,7 @@ struct dvb_frontend* nxt2002_attach(const struct nxt2002_config* config, u8 buf [] = {0,0,0,0,0}; /* allocate memory for the internal state */ - state = (struct nxt2002_state*) kmalloc(sizeof(struct nxt2002_state), GFP_KERNEL); + state = kmalloc(sizeof(struct nxt2002_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/nxt6000.c b/drivers/media/dvb/frontends/nxt6000.c index a41f7da8b84..966de9853d1 100644 --- a/drivers/media/dvb/frontends/nxt6000.c +++ b/drivers/media/dvb/frontends/nxt6000.c @@ -176,11 +176,16 @@ static int nxt6000_set_transmission_mode(struct nxt6000_state* state, fe_transmi static void nxt6000_setup(struct dvb_frontend* fe) { - struct nxt6000_state* state = (struct nxt6000_state*) fe->demodulator_priv; + struct nxt6000_state* state = fe->demodulator_priv; nxt6000_writereg(state, RS_COR_SYNC_PARAM, SYNC_PARAM); nxt6000_writereg(state, BER_CTRL, /*(1 << 2) | */ (0x01 << 1) | 0x01); - nxt6000_writereg(state, VIT_COR_CTL, VIT_COR_RESYNC); + nxt6000_writereg(state, VIT_BERTIME_2, 0x00); // BER Timer = 0x000200 * 256 = 131072 bits + nxt6000_writereg(state, VIT_BERTIME_1, 0x02); // + nxt6000_writereg(state, VIT_BERTIME_0, 0x00); // + nxt6000_writereg(state, VIT_COR_INTEN, 0x98); // Enable BER interrupts + nxt6000_writereg(state, VIT_COR_CTL, 0x82); // Enable BER measurement + nxt6000_writereg(state, VIT_COR_CTL, VIT_COR_RESYNC | 0x02 ); nxt6000_writereg(state, OFDM_COR_CTL, (0x01 << 5) | (nxt6000_readreg(state, OFDM_COR_CTL) & 0x0F)); nxt6000_writereg(state, OFDM_COR_MODEGUARD, FORCEMODE8K | 0x02); nxt6000_writereg(state, OFDM_AGC_CTL, AGCLAST | INITIAL_AGC_BW); @@ -422,7 +427,7 @@ static void nxt6000_dump_status(struct nxt6000_state *state) static int nxt6000_read_status(struct dvb_frontend* fe, fe_status_t* status) { u8 core_status; - struct nxt6000_state* state = (struct nxt6000_state*) fe->demodulator_priv; + struct nxt6000_state* state = fe->demodulator_priv; *status = 0; @@ -451,7 +456,7 @@ static int nxt6000_read_status(struct dvb_frontend* fe, fe_status_t* status) static int nxt6000_init(struct dvb_frontend* fe) { - struct nxt6000_state* state = (struct nxt6000_state*) fe->demodulator_priv; + struct nxt6000_state* state = fe->demodulator_priv; nxt6000_reset(state); nxt6000_setup(fe); @@ -461,7 +466,7 @@ static int nxt6000_init(struct dvb_frontend* fe) static int nxt6000_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *param) { - struct nxt6000_state* state = (struct nxt6000_state*) fe->demodulator_priv; + struct nxt6000_state* state = fe->demodulator_priv; int result; nxt6000_writereg(state, ENABLE_TUNER_IIC, 0x01); /* open i2c bus switch */ @@ -482,10 +487,44 @@ static int nxt6000_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static void nxt6000_release(struct dvb_frontend* fe) { - struct nxt6000_state* state = (struct nxt6000_state*) fe->demodulator_priv; + struct nxt6000_state* state = fe->demodulator_priv; kfree(state); } +static int nxt6000_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct nxt6000_state* state = fe->demodulator_priv; + + *snr = nxt6000_readreg( state, OFDM_CHC_SNR) / 8; + + return 0; +} + +static int nxt6000_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct nxt6000_state* state = fe->demodulator_priv; + + nxt6000_writereg( state, VIT_COR_INTSTAT, 0x18 ); + + *ber = (nxt6000_readreg( state, VIT_BER_1 ) << 8 ) | + nxt6000_readreg( state, VIT_BER_0 ); + + nxt6000_writereg( state, VIT_COR_INTSTAT, 0x18); // Clear BER Done interrupts + + return 0; +} + +static int nxt6000_read_signal_strength(struct dvb_frontend* fe, u16* signal_strength) +{ + struct nxt6000_state* state = fe->demodulator_priv; + + *signal_strength = (short) (511 - + (nxt6000_readreg(state, AGC_GAIN_1) + + ((nxt6000_readreg(state, AGC_GAIN_2) & 0x03) << 8))); + + return 0; +} + static struct dvb_frontend_ops nxt6000_ops; struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config, @@ -494,7 +533,7 @@ struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config, struct nxt6000_state* state = NULL; /* allocate memory for the internal state */ - state = (struct nxt6000_state*) kmalloc(sizeof(struct nxt6000_state), GFP_KERNEL); + state = kmalloc(sizeof(struct nxt6000_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ @@ -542,6 +581,9 @@ static struct dvb_frontend_ops nxt6000_ops = { .set_frontend = nxt6000_set_frontend, .read_status = nxt6000_read_status, + .read_ber = nxt6000_read_ber, + .read_signal_strength = nxt6000_read_signal_strength, + .read_snr = nxt6000_read_snr, }; module_param(debug, int, 0644); diff --git a/drivers/media/dvb/frontends/nxt6000_priv.h b/drivers/media/dvb/frontends/nxt6000_priv.h index 64b1a89b2a2..0422e580038 100644 --- a/drivers/media/dvb/frontends/nxt6000_priv.h +++ b/drivers/media/dvb/frontends/nxt6000_priv.h @@ -65,12 +65,27 @@ #define BER_DONE (0x08) #define BER_OVERFLOW (0x10) +/* 0x38 VIT_BERTIME_2 */ +#define VIT_BERTIME_2 (0x38) + +/* 0x39 VIT_BERTIME_1 */ +#define VIT_BERTIME_1 (0x39) + +/* 0x3A VIT_BERTIME_0 */ +#define VIT_BERTIME_0 (0x3a) + /* 0x38 OFDM_BERTimer *//* Use the alias registers */ #define A_VIT_BER_TIMER_0 (0x1D) /* 0x3A VIT_BER_TIMER_0 *//* Use the alias registers */ #define A_VIT_BER_0 (0x1B) +/* 0x3B VIT_BER_1 */ +#define VIT_BER_1 (0x3b) + +/* 0x3C VIT_BER_0 */ +#define VIT_BER_0 (0x3c) + /* 0x40 OFDM_COR_CTL */ #define OFDM_COR_CTL (0x40) #define COREACT (0x20) @@ -117,6 +132,12 @@ #define OFDM_ITB_CTL (0x4B) #define ITBINV (0x01) +/* 0x49 AGC_GAIN_1 */ +#define AGC_GAIN_1 (0x49) + +/* 0x4A AGC_GAIN_2 */ +#define AGC_GAIN_2 (0x4A) + /* 0x4C OFDM_ITB_FREQ_1 */ #define OFDM_ITB_FREQ_1 (0x4C) diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c index df5dee7760a..cc0a77c790f 100644 --- a/drivers/media/dvb/frontends/or51132.c +++ b/drivers/media/dvb/frontends/or51132.c @@ -102,7 +102,7 @@ static u8 i2c_readbytes (struct or51132_state* state, u8 reg, u8* buf, int len) static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) { - struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; + struct or51132_state* state = fe->demodulator_priv; static u8 run_buf[] = {0x7F,0x01}; static u8 get_ver_buf[] = {0x04,0x00,0x30,0x00,0x00}; u8 rec_buf[14]; @@ -240,7 +240,7 @@ static int or51132_sleep(struct dvb_frontend* fe) static int or51132_setmode(struct dvb_frontend* fe) { - struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; + struct or51132_state* state = fe->demodulator_priv; unsigned char cmd_buf[4]; dprintk("setmode %d\n",(int)state->current_modulation); @@ -316,7 +316,7 @@ static int or51132_set_parameters(struct dvb_frontend* fe, { int ret; u8 buf[4]; - struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; + struct or51132_state* state = fe->demodulator_priv; const struct firmware *fw; /* Change only if we are actually changing the modulation */ @@ -391,7 +391,7 @@ static int or51132_set_parameters(struct dvb_frontend* fe, static int or51132_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; + struct or51132_state* state = fe->demodulator_priv; unsigned char rec_buf[2]; unsigned char snd_buf[2]; *status = 0; @@ -464,7 +464,7 @@ static unsigned int i20Log10(unsigned short val) static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength) { - struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; + struct or51132_state* state = fe->demodulator_priv; unsigned char rec_buf[2]; unsigned char snd_buf[2]; u8 rcvr_stat; @@ -512,7 +512,7 @@ static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength) static int or51132_read_snr(struct dvb_frontend* fe, u16* snr) { - struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; + struct or51132_state* state = fe->demodulator_priv; unsigned char rec_buf[2]; unsigned char snd_buf[2]; u16 snr_equ; @@ -549,7 +549,7 @@ static int or51132_get_tune_settings(struct dvb_frontend* fe, struct dvb_fronten static void or51132_release(struct dvb_frontend* fe) { - struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv; + struct or51132_state* state = fe->demodulator_priv; kfree(state); } diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c index 58ad34ef0a0..764a95a2e21 100644 --- a/drivers/media/dvb/frontends/sp8870.c +++ b/drivers/media/dvb/frontends/sp8870.c @@ -248,7 +248,7 @@ static int sp8870_wake_up(struct sp8870_state* state) static int sp8870_set_frontend_parameters (struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv; + struct sp8870_state* state = fe->demodulator_priv; int err; u16 reg0xc05; @@ -302,7 +302,7 @@ static int sp8870_set_frontend_parameters (struct dvb_frontend* fe, static int sp8870_init (struct dvb_frontend* fe) { - struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv; + struct sp8870_state* state = fe->demodulator_priv; const struct firmware *fw = NULL; sp8870_wake_up(state); @@ -358,7 +358,7 @@ static int sp8870_init (struct dvb_frontend* fe) static int sp8870_read_status (struct dvb_frontend* fe, fe_status_t * fe_status) { - struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv; + struct sp8870_state* state = fe->demodulator_priv; int status; int signal; @@ -384,7 +384,7 @@ static int sp8870_read_status (struct dvb_frontend* fe, fe_status_t * fe_status) static int sp8870_read_ber (struct dvb_frontend* fe, u32 * ber) { - struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv; + struct sp8870_state* state = fe->demodulator_priv; int ret; u32 tmp; @@ -412,7 +412,7 @@ static int sp8870_read_ber (struct dvb_frontend* fe, u32 * ber) static int sp8870_read_signal_strength(struct dvb_frontend* fe, u16 * signal) { - struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv; + struct sp8870_state* state = fe->demodulator_priv; int ret; u16 tmp; @@ -438,7 +438,7 @@ static int sp8870_read_signal_strength(struct dvb_frontend* fe, u16 * signal) static int sp8870_read_uncorrected_blocks (struct dvb_frontend* fe, u32* ublocks) { - struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv; + struct sp8870_state* state = fe->demodulator_priv; int ret; *ublocks = 0; @@ -467,7 +467,7 @@ static int switches = 0; static int sp8870_set_frontend (struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv; + struct sp8870_state* state = fe->demodulator_priv; /* The firmware of the sp8870 sometimes locks up after setting frontend parameters. @@ -524,7 +524,7 @@ static int sp8870_set_frontend (struct dvb_frontend* fe, struct dvb_frontend_par static int sp8870_sleep(struct dvb_frontend* fe) { - struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv; + struct sp8870_state* state = fe->demodulator_priv; // tristate TS output and disable interface pins return sp8870_writereg(state, 0xC18, 0x000); @@ -540,7 +540,7 @@ static int sp8870_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend static void sp8870_release(struct dvb_frontend* fe) { - struct sp8870_state* state = (struct sp8870_state*) fe->demodulator_priv; + struct sp8870_state* state = fe->demodulator_priv; kfree(state); } @@ -552,7 +552,7 @@ struct dvb_frontend* sp8870_attach(const struct sp8870_config* config, struct sp8870_state* state = NULL; /* allocate memory for the internal state */ - state = (struct sp8870_state*) kmalloc(sizeof(struct sp8870_state), GFP_KERNEL); + state = kmalloc(sizeof(struct sp8870_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c index 7eae833ece4..d868a6927a1 100644 --- a/drivers/media/dvb/frontends/sp887x.c +++ b/drivers/media/dvb/frontends/sp887x.c @@ -135,7 +135,7 @@ static void sp887x_setup_agc (struct sp887x_state* state) */ static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware *fw) { - struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv; + struct sp887x_state* state = fe->demodulator_priv; u8 buf [BLOCKSIZE+2]; int i; int fw_size = fw->size; @@ -344,7 +344,7 @@ static void sp887x_correct_offsets (struct sp887x_state* state, static int sp887x_setup_frontend_parameters (struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv; + struct sp887x_state* state = fe->demodulator_priv; int actual_freq, err; u16 val, reg0xc05; @@ -405,7 +405,7 @@ static int sp887x_setup_frontend_parameters (struct dvb_frontend* fe, static int sp887x_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv; + struct sp887x_state* state = fe->demodulator_priv; u16 snr12 = sp887x_readreg(state, 0xf16); u16 sync0x200 = sp887x_readreg(state, 0x200); u16 sync0xf17 = sp887x_readreg(state, 0xf17); @@ -439,7 +439,7 @@ static int sp887x_read_status(struct dvb_frontend* fe, fe_status_t* status) static int sp887x_read_ber(struct dvb_frontend* fe, u32* ber) { - struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv; + struct sp887x_state* state = fe->demodulator_priv; *ber = (sp887x_readreg(state, 0xc08) & 0x3f) | (sp887x_readreg(state, 0xc07) << 6); @@ -453,7 +453,7 @@ static int sp887x_read_ber(struct dvb_frontend* fe, u32* ber) static int sp887x_read_signal_strength(struct dvb_frontend* fe, u16* strength) { - struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv; + struct sp887x_state* state = fe->demodulator_priv; u16 snr12 = sp887x_readreg(state, 0xf16); u32 signal = 3 * (snr12 << 4); @@ -464,7 +464,7 @@ static int sp887x_read_signal_strength(struct dvb_frontend* fe, u16* strength) static int sp887x_read_snr(struct dvb_frontend* fe, u16* snr) { - struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv; + struct sp887x_state* state = fe->demodulator_priv; u16 snr12 = sp887x_readreg(state, 0xf16); *snr = (snr12 << 4) | (snr12 >> 8); @@ -474,7 +474,7 @@ static int sp887x_read_snr(struct dvb_frontend* fe, u16* snr) static int sp887x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv; + struct sp887x_state* state = fe->demodulator_priv; *ucblocks = sp887x_readreg(state, 0xc0c); if (*ucblocks == 0xfff) @@ -485,7 +485,7 @@ static int sp887x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) static int sp887x_sleep(struct dvb_frontend* fe) { - struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv; + struct sp887x_state* state = fe->demodulator_priv; /* tristate TS output and disable interface pins */ sp887x_writereg(state, 0xc18, 0x000); @@ -495,7 +495,7 @@ static int sp887x_sleep(struct dvb_frontend* fe) static int sp887x_init(struct dvb_frontend* fe) { - struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv; + struct sp887x_state* state = fe->demodulator_priv; const struct firmware *fw = NULL; int ret; @@ -534,7 +534,7 @@ static int sp887x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend static void sp887x_release(struct dvb_frontend* fe) { - struct sp887x_state* state = (struct sp887x_state*) fe->demodulator_priv; + struct sp887x_state* state = fe->demodulator_priv; kfree(state); } @@ -546,7 +546,7 @@ struct dvb_frontend* sp887x_attach(const struct sp887x_config* config, struct sp887x_state* state = NULL; /* allocate memory for the internal state */ - state = (struct sp887x_state*) kmalloc(sizeof(struct sp887x_state), GFP_KERNEL); + state = kmalloc(sizeof(struct sp887x_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c index 502c6403dfc..e681263bf07 100644 --- a/drivers/media/dvb/frontends/stv0297.c +++ b/drivers/media/dvb/frontends/stv0297.c @@ -365,7 +365,7 @@ static int stv0297_set_inversion(struct stv0297_state *state, fe_spectral_invers int stv0297_enable_plli2c(struct dvb_frontend *fe) { - struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv; + struct stv0297_state *state = fe->demodulator_priv; stv0297_writereg(state, 0x87, 0x78); stv0297_writereg(state, 0x86, 0xc8); @@ -375,7 +375,7 @@ int stv0297_enable_plli2c(struct dvb_frontend *fe) static int stv0297_init(struct dvb_frontend *fe) { - struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv; + struct stv0297_state *state = fe->demodulator_priv; int i; /* soft reset */ @@ -416,7 +416,7 @@ static int stv0297_init(struct dvb_frontend *fe) static int stv0297_sleep(struct dvb_frontend *fe) { - struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv; + struct stv0297_state *state = fe->demodulator_priv; stv0297_writereg_mask(state, 0x80, 1, 1); @@ -425,7 +425,7 @@ static int stv0297_sleep(struct dvb_frontend *fe) static int stv0297_read_status(struct dvb_frontend *fe, fe_status_t * status) { - struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv; + struct stv0297_state *state = fe->demodulator_priv; u8 sync = stv0297_readreg(state, 0xDF); @@ -438,7 +438,7 @@ static int stv0297_read_status(struct dvb_frontend *fe, fe_status_t * status) static int stv0297_read_ber(struct dvb_frontend *fe, u32 * ber) { - struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv; + struct stv0297_state *state = fe->demodulator_priv; u8 BER[3]; stv0297_writereg(state, 0xA0, 0x80); // Start Counting bit errors for 4096 Bytes @@ -453,7 +453,7 @@ static int stv0297_read_ber(struct dvb_frontend *fe, u32 * ber) static int stv0297_read_signal_strength(struct dvb_frontend *fe, u16 * strength) { - struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv; + struct stv0297_state *state = fe->demodulator_priv; u8 STRENGTH[2]; stv0297_readregs(state, 0x41, STRENGTH, 2); @@ -464,7 +464,7 @@ static int stv0297_read_signal_strength(struct dvb_frontend *fe, u16 * strength) static int stv0297_read_snr(struct dvb_frontend *fe, u16 * snr) { - struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv; + struct stv0297_state *state = fe->demodulator_priv; u8 SNR[2]; stv0297_readregs(state, 0x07, SNR, 2); @@ -475,7 +475,7 @@ static int stv0297_read_snr(struct dvb_frontend *fe, u16 * snr) static int stv0297_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks) { - struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv; + struct stv0297_state *state = fe->demodulator_priv; *ucblocks = (stv0297_readreg(state, 0xD5) << 8) | stv0297_readreg(state, 0xD4); @@ -485,7 +485,7 @@ static int stv0297_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks) static int stv0297_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { - struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv; + struct stv0297_state *state = fe->demodulator_priv; int u_threshold; int initial_u; int blind_u; @@ -689,7 +689,7 @@ timeout: static int stv0297_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { - struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv; + struct stv0297_state *state = fe->demodulator_priv; int reg_00, reg_83; reg_00 = stv0297_readreg(state, 0x00); @@ -725,7 +725,7 @@ static int stv0297_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_par static void stv0297_release(struct dvb_frontend *fe) { - struct stv0297_state *state = (struct stv0297_state *) fe->demodulator_priv; + struct stv0297_state *state = fe->demodulator_priv; kfree(state); } @@ -737,7 +737,7 @@ struct dvb_frontend *stv0297_attach(const struct stv0297_config *config, struct stv0297_state *state = NULL; /* allocate memory for the internal state */ - state = (struct stv0297_state *) kmalloc(sizeof(struct stv0297_state), GFP_KERNEL); + state = kmalloc(sizeof(struct stv0297_state), GFP_KERNEL); if (state == NULL) goto error; diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c index 15b40541b62..cfa3928bb48 100644 --- a/drivers/media/dvb/frontends/stv0299.c +++ b/drivers/media/dvb/frontends/stv0299.c @@ -70,6 +70,7 @@ struct stv0299_state { #define STATUS_UCBLOCKS 1 static int debug; +static int debug_legacy_dish_switch; #define dprintk(args...) \ do { \ if (debug) printk(KERN_DEBUG "stv0299: " args); \ @@ -93,7 +94,7 @@ static int stv0299_writeregI (struct stv0299_state* state, u8 reg, u8 data) int stv0299_writereg (struct dvb_frontend* fe, u8 reg, u8 data) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; return stv0299_writeregI(state, reg, data); } @@ -218,7 +219,7 @@ static int stv0299_wait_diseqc_idle (struct stv0299_state* state, int timeout) static int stv0299_set_symbolrate (struct dvb_frontend* fe, u32 srate) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; u64 big = srate; u32 ratio; @@ -269,7 +270,7 @@ static int stv0299_get_symbolrate (struct stv0299_state* state) static int stv0299_send_diseqc_msg (struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *m) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; u8 val; int i; @@ -299,7 +300,7 @@ static int stv0299_send_diseqc_msg (struct dvb_frontend* fe, static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; u8 val; dprintk ("%s\n", __FUNCTION__); @@ -326,7 +327,7 @@ static int stv0299_send_diseqc_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t static int stv0299_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; u8 val; if (stv0299_wait_diseqc_idle (state, 100) < 0) @@ -348,7 +349,7 @@ static int stv0299_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; u8 reg0x08; u8 reg0x0c; @@ -385,34 +386,84 @@ static int stv0299_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltag }; } -static int stv0299_send_legacy_dish_cmd(struct dvb_frontend* fe, u32 cmd) +static inline s32 stv0299_calc_usec_delay (struct timeval lasttime, struct timeval curtime) { + return ((curtime.tv_usec < lasttime.tv_usec) ? + 1000000 - lasttime.tv_usec + curtime.tv_usec : + curtime.tv_usec - lasttime.tv_usec); +} + +static void stv0299_sleep_until (struct timeval *waketime, u32 add_usec) +{ + struct timeval lasttime; + s32 delta, newdelta; + + waketime->tv_usec += add_usec; + if (waketime->tv_usec >= 1000000) { + waketime->tv_usec -= 1000000; + waketime->tv_sec++; + } + + do_gettimeofday (&lasttime); + delta = stv0299_calc_usec_delay (lasttime, *waketime); + if (delta > 2500) { + msleep ((delta - 1500) / 1000); + do_gettimeofday (&lasttime); + newdelta = stv0299_calc_usec_delay (lasttime, *waketime); + delta = (newdelta > delta) ? 0 : newdelta; + } + if (delta > 0) + udelay (delta); +} + +static int stv0299_send_legacy_dish_cmd (struct dvb_frontend* fe, u32 cmd) +{ + struct stv0299_state* state = fe->demodulator_priv; + u8 reg0x08; + u8 reg0x0c; + u8 lv_mask = 0x40; u8 last = 1; int i; + struct timeval nexttime; + struct timeval tv[10]; - /* reset voltage at the end - if((0x50 & stv0299_readreg (i2c, 0x0c)) == 0x50) - cmd |= 0x80; - else - cmd &= 0x7F; - */ + reg0x08 = stv0299_readreg (state, 0x08); + reg0x0c = stv0299_readreg (state, 0x0c); + reg0x0c &= 0x0f; + stv0299_writeregI (state, 0x08, (reg0x08 & 0x3f) | (state->config->lock_output << 6)); + if (state->config->volt13_op0_op1 == STV0299_VOLT13_OP0) + lv_mask = 0x10; cmd = cmd << 1; - dprintk("%s switch command: 0x%04x\n",__FUNCTION__, cmd); + if (debug_legacy_dish_switch) + printk ("%s switch command: 0x%04x\n",__FUNCTION__, cmd); + + do_gettimeofday (&nexttime); + if (debug_legacy_dish_switch) + memcpy (&tv[0], &nexttime, sizeof (struct timeval)); + stv0299_writeregI (state, 0x0c, reg0x0c | 0x50); /* set LNB to 18V */ - stv0299_set_voltage(fe,SEC_VOLTAGE_18); - msleep(32); + stv0299_sleep_until (&nexttime, 32000); for (i=0; i<9; i++) { + if (debug_legacy_dish_switch) + do_gettimeofday (&tv[i+1]); if((cmd & 0x01) != last) { - stv0299_set_voltage(fe, last ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18); + /* set voltage to (last ? 13V : 18V) */ + stv0299_writeregI (state, 0x0c, reg0x0c | (last ? lv_mask : 0x50)); last = (last) ? 0 : 1; } cmd = cmd >> 1; if (i != 8) - msleep(8); + stv0299_sleep_until (&nexttime, 8000); + } + if (debug_legacy_dish_switch) { + printk ("%s(%d): switch delay (should be 32k followed by all 8k\n", + __FUNCTION__, fe->dvb->num); + for (i=1; i < 10; i++) + printk ("%d: %d\n", i, stv0299_calc_usec_delay (tv[i-1] , tv[i])); } return 0; @@ -420,7 +471,7 @@ static int stv0299_send_legacy_dish_cmd(struct dvb_frontend* fe, u32 cmd) static int stv0299_init (struct dvb_frontend* fe) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; int i; dprintk("stv0299: init chip\n"); @@ -439,7 +490,7 @@ static int stv0299_init (struct dvb_frontend* fe) static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; u8 signal = 0xff - stv0299_readreg (state, 0x18); u8 sync = stv0299_readreg (state, 0x1b); @@ -467,7 +518,7 @@ static int stv0299_read_status(struct dvb_frontend* fe, fe_status_t* status) static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; if (state->errmode != STATUS_BER) return 0; *ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e); @@ -477,7 +528,7 @@ static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber) static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; s32 signal = 0xffff - ((stv0299_readreg (state, 0x18) << 8) | stv0299_readreg (state, 0x19)); @@ -494,7 +545,7 @@ static int stv0299_read_signal_strength(struct dvb_frontend* fe, u16* strength) static int stv0299_read_snr(struct dvb_frontend* fe, u16* snr) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; s32 xsnr = 0xffff - ((stv0299_readreg (state, 0x24) << 8) | stv0299_readreg (state, 0x25)); @@ -506,7 +557,7 @@ static int stv0299_read_snr(struct dvb_frontend* fe, u16* snr) static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0; else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e); @@ -516,7 +567,7 @@ static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; int invval = 0; dprintk ("%s : FE_SET_FRONTEND\n", __FUNCTION__); @@ -584,7 +635,7 @@ static int stv0299_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static int stv0299_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters * p) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; s32 derot_freq; int invval; @@ -609,7 +660,7 @@ static int stv0299_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static int stv0299_sleep(struct dvb_frontend* fe) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; stv0299_writeregI(state, 0x02, 0x80); state->initialised = 0; @@ -619,7 +670,7 @@ static int stv0299_sleep(struct dvb_frontend* fe) static int stv0299_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; fesettings->min_delay_ms = state->config->min_delay_ms; if (fesettings->parameters.u.qpsk.symbol_rate < 10000000) { @@ -634,7 +685,7 @@ static int stv0299_get_tune_settings(struct dvb_frontend* fe, struct dvb_fronten static void stv0299_release(struct dvb_frontend* fe) { - struct stv0299_state* state = (struct stv0299_state*) fe->demodulator_priv; + struct stv0299_state* state = fe->demodulator_priv; kfree(state); } @@ -647,7 +698,7 @@ struct dvb_frontend* stv0299_attach(const struct stv0299_config* config, int id; /* allocate memory for the internal state */ - state = (struct stv0299_state*) kmalloc(sizeof(struct stv0299_state), GFP_KERNEL); + state = kmalloc(sizeof(struct stv0299_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ @@ -719,6 +770,9 @@ static struct dvb_frontend_ops stv0299_ops = { .dishnetwork_send_legacy_command = stv0299_send_legacy_dish_cmd, }; +module_param(debug_legacy_dish_switch, int, 0444); +MODULE_PARM_DESC(debug_legacy_dish_switch, "Enable timing analysis for Dish Network legacy switches"); + module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); diff --git a/drivers/media/dvb/frontends/tda10021.c b/drivers/media/dvb/frontends/tda10021.c index 4e40d95ee95..87d5f4d8790 100644 --- a/drivers/media/dvb/frontends/tda10021.c +++ b/drivers/media/dvb/frontends/tda10021.c @@ -205,7 +205,7 @@ static int tda10021_set_symbolrate (struct tda10021_state* state, u32 symbolrate static int tda10021_init (struct dvb_frontend *fe) { - struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv; + struct tda10021_state* state = fe->demodulator_priv; int i; dprintk("DVB: TDA10021(%d): init chip\n", fe->adapter->num); @@ -238,7 +238,7 @@ static int tda10021_init (struct dvb_frontend *fe) static int tda10021_set_parameters (struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { - struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv; + struct tda10021_state* state = fe->demodulator_priv; //table for QAM4-QAM256 ready QAM4 QAM16 QAM32 QAM64 QAM128 QAM256 //CONF @@ -278,7 +278,7 @@ static int tda10021_set_parameters (struct dvb_frontend *fe, static int tda10021_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv; + struct tda10021_state* state = fe->demodulator_priv; int sync; *status = 0; @@ -303,7 +303,7 @@ static int tda10021_read_status(struct dvb_frontend* fe, fe_status_t* status) static int tda10021_read_ber(struct dvb_frontend* fe, u32* ber) { - struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv; + struct tda10021_state* state = fe->demodulator_priv; u32 _ber = tda10021_readreg(state, 0x14) | (tda10021_readreg(state, 0x15) << 8) | @@ -315,7 +315,7 @@ static int tda10021_read_ber(struct dvb_frontend* fe, u32* ber) static int tda10021_read_signal_strength(struct dvb_frontend* fe, u16* strength) { - struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv; + struct tda10021_state* state = fe->demodulator_priv; u8 gain = tda10021_readreg(state, 0x17); *strength = (gain << 8) | gain; @@ -325,7 +325,7 @@ static int tda10021_read_signal_strength(struct dvb_frontend* fe, u16* strength) static int tda10021_read_snr(struct dvb_frontend* fe, u16* snr) { - struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv; + struct tda10021_state* state = fe->demodulator_priv; u8 quality = ~tda10021_readreg(state, 0x18); *snr = (quality << 8) | quality; @@ -335,7 +335,7 @@ static int tda10021_read_snr(struct dvb_frontend* fe, u16* snr) static int tda10021_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv; + struct tda10021_state* state = fe->demodulator_priv; *ucblocks = tda10021_readreg (state, 0x13) & 0x7f; if (*ucblocks == 0x7f) @@ -350,7 +350,7 @@ static int tda10021_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) static int tda10021_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv; + struct tda10021_state* state = fe->demodulator_priv; int sync; s8 afc = 0; @@ -378,7 +378,7 @@ static int tda10021_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_pa static int tda10021_sleep(struct dvb_frontend* fe) { - struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv; + struct tda10021_state* state = fe->demodulator_priv; tda10021_writereg (state, 0x1b, 0x02); /* pdown ADC */ tda10021_writereg (state, 0x00, 0x80); /* standby */ @@ -388,7 +388,7 @@ static int tda10021_sleep(struct dvb_frontend* fe) static void tda10021_release(struct dvb_frontend* fe) { - struct tda10021_state* state = (struct tda10021_state*) fe->demodulator_priv; + struct tda10021_state* state = fe->demodulator_priv; kfree(state); } @@ -401,7 +401,7 @@ struct dvb_frontend* tda10021_attach(const struct tda10021_config* config, struct tda10021_state* state = NULL; /* allocate memory for the internal state */ - state = (struct tda10021_state*) kmalloc(sizeof(struct tda10021_state), GFP_KERNEL); + state = kmalloc(sizeof(struct tda10021_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c index 687ad9cf338..0beb370792a 100644 --- a/drivers/media/dvb/frontends/tda1004x.c +++ b/drivers/media/dvb/frontends/tda1004x.c @@ -35,9 +35,10 @@ #include "dvb_frontend.h" #include "tda1004x.h" -#define TDA1004X_DEMOD_TDA10045 0 -#define TDA1004X_DEMOD_TDA10046 1 - +enum tda1004x_demod { + TDA1004X_DEMOD_TDA10045, + TDA1004X_DEMOD_TDA10046, +}; struct tda1004x_state { struct i2c_adapter* i2c; @@ -46,8 +47,9 @@ struct tda1004x_state { struct dvb_frontend frontend; /* private demod data */ - u8 initialised:1; - u8 demod_type; + u8 initialised; + enum tda1004x_demod demod_type; + u8 fw_version; }; @@ -139,7 +141,7 @@ static int tda1004x_write_byteI(struct tda1004x_state *state, int reg, int data) { int ret; u8 buf[] = { reg, data }; - struct i2c_msg msg = { .addr=0, .flags=0, .buf=buf, .len=2 }; + struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 }; dprintk("%s: reg=0x%x, data=0x%x\n", __FUNCTION__, reg, data); @@ -160,8 +162,8 @@ static int tda1004x_read_byte(struct tda1004x_state *state, int reg) int ret; u8 b0[] = { reg }; u8 b1[] = { 0 }; - struct i2c_msg msg[] = {{ .addr=0, .flags=0, .buf=b0, .len=1}, - { .addr=0, .flags=I2C_M_RD, .buf=b1, .len = 1}}; + struct i2c_msg msg[] = {{ .flags = 0, .buf = b0, .len = 1 }, + { .flags = I2C_M_RD, .buf = b1, .len = 1 }}; dprintk("%s: reg=0x%x\n", __FUNCTION__, reg); @@ -294,7 +296,7 @@ static int tda1004x_do_upload(struct tda1004x_state *state, u8 dspCodeCounterReg, u8 dspCodeInReg) { u8 buf[65]; - struct i2c_msg fw_msg = {.addr = 0,.flags = 0,.buf = buf,.len = 0 }; + struct i2c_msg fw_msg = { .flags = 0, .buf = buf, .len = 0 }; int tx_size; int pos = 0; @@ -304,12 +306,10 @@ static int tda1004x_do_upload(struct tda1004x_state *state, buf[0] = dspCodeInReg; while (pos != len) { - // work out how much to send this time tx_size = len - pos; - if (tx_size > 0x10) { + if (tx_size > 0x10) tx_size = 0x10; - } // send the chunk memcpy(buf + 1, mem + pos, tx_size); @@ -322,6 +322,7 @@ static int tda1004x_do_upload(struct tda1004x_state *state, dprintk("%s: fw_pos=0x%x\n", __FUNCTION__, pos); } + return 0; } @@ -335,9 +336,8 @@ static int tda1004x_check_upload_ok(struct tda1004x_state *state, u8 dspVersion) data1 = tda1004x_read_byte(state, TDA1004X_DSP_DATA1); data2 = tda1004x_read_byte(state, TDA1004X_DSP_DATA2); - if (data1 != 0x67 || data2 != dspVersion) { + if ((data1 != 0x67) || (data2 != dspVersion)) return -EIO; - } return 0; } @@ -348,9 +348,9 @@ static int tda10045_fwupload(struct dvb_frontend* fe) int ret; const struct firmware *fw; - /* don't re-upload unless necessary */ - if (tda1004x_check_upload_ok(state, 0x2c) == 0) return 0; + if (tda1004x_check_upload_ok(state, 0x2c) == 0) + return 0; /* request the firmware, this will block until someone uploads it */ printk("tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE); @@ -381,6 +381,25 @@ static int tda10045_fwupload(struct dvb_frontend* fe) return tda1004x_check_upload_ok(state, 0x2c); } +static int tda10046_get_fw_version(struct tda1004x_state *state, + const struct firmware *fw) +{ + const unsigned char pattern[] = { 0x67, 0x00, 0x50, 0x62, 0x5e, 0x18, 0x67 }; + unsigned int i; + + /* area guessed from firmware v20, v21 and v25 */ + for (i = 0x660; i < 0x700; i++) { + if (!memcmp(&fw->data[i], pattern, sizeof(pattern))) { + state->fw_version = fw->data[i + sizeof(pattern)]; + printk(KERN_INFO "tda1004x: using firmware v%02x\n", + state->fw_version); + return 0; + } + } + + return -EINVAL; +} + static int tda10046_fwupload(struct dvb_frontend* fe) { struct tda1004x_state* state = fe->demodulator_priv; @@ -394,7 +413,8 @@ static int tda10046_fwupload(struct dvb_frontend* fe) msleep(100); /* don't re-upload unless necessary */ - if (tda1004x_check_upload_ok(state, 0x20) == 0) return 0; + if (tda1004x_check_upload_ok(state, state->fw_version) == 0) + return 0; /* request the firmware, this will block until someone uploads it */ printk("tda1004x: waiting for firmware upload (%s)...\n", TDA10046_DEFAULT_FIRMWARE); @@ -404,9 +424,20 @@ static int tda10046_fwupload(struct dvb_frontend* fe) return ret; } + if (fw->size < 24478) { /* size of firmware v20, which is the smallest of v20, v21 and v25 */ + printk("tda1004x: firmware file seems to be too small (%d bytes)\n", fw->size); + return -EINVAL; + } + + ret = tda10046_get_fw_version(state, fw); + if (ret < 0) { + printk("tda1004x: unable to find firmware version\n"); + return ret; + } + /* set parameters */ tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10); - tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); + tda1004x_write_byteI(state, TDA10046H_CONFPLL3, state->config->n_i2c); tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 99); tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4); tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x2c); @@ -419,7 +450,7 @@ static int tda10046_fwupload(struct dvb_frontend* fe) /* wait for DSP to initialise */ timeout = jiffies + HZ; - while(!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) { + while (!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) { if (time_after(jiffies, timeout)) { printk("tda1004x: DSP failed to initialised.\n"); return -EIO; @@ -427,7 +458,7 @@ static int tda10046_fwupload(struct dvb_frontend* fe) msleep(1); } - return tda1004x_check_upload_ok(state, 0x20); + return tda1004x_check_upload_ok(state, state->fw_version); } static int tda1004x_encode_fec(int fec) @@ -483,7 +514,8 @@ static int tda10045_init(struct dvb_frontend* fe) dprintk("%s\n", __FUNCTION__); - if (state->initialised) return 0; + if (state->initialised) + return 0; if (tda10045_fwupload(fe)) { printk("tda1004x: firmware upload failed\n"); @@ -523,7 +555,8 @@ static int tda10046_init(struct dvb_frontend* fe) struct tda1004x_state* state = fe->demodulator_priv; dprintk("%s\n", __FUNCTION__); - if (state->initialised) return 0; + if (state->initialised) + return 0; if (tda10046_fwupload(fe)) { printk("tda1004x: firmware upload failed\n"); @@ -545,7 +578,7 @@ static int tda10046_init(struct dvb_frontend* fe) tda1004x_write_mask(state, TDA1004X_AUTO, 8, 0); // select HP stream tda1004x_write_mask(state, TDA1004X_CONFC1, 0x80, 0); // disable pulse killer tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10); // PLL M = 10 - tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0 + tda1004x_write_byteI(state, TDA10046H_CONFPLL3, state->config->n_i2c); // PLL P = N = 0 tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 99); // FREQOFFS = 99 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4); // } PHY2 = -11221 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x2c); // } @@ -621,12 +654,14 @@ static int tda1004x_set_fe(struct dvb_frontend* fe, // set HP FEC tmp = tda1004x_encode_fec(fe_params->u.ofdm.code_rate_HP); - if (tmp < 0) return tmp; + if (tmp < 0) + return tmp; tda1004x_write_mask(state, TDA1004X_IN_CONF2, 7, tmp); // set LP FEC tmp = tda1004x_encode_fec(fe_params->u.ofdm.code_rate_LP); - if (tmp < 0) return tmp; + if (tmp < 0) + return tmp; tda1004x_write_mask(state, TDA1004X_IN_CONF2, 0x38, tmp << 3); // set constellation @@ -671,7 +706,7 @@ static int tda1004x_set_fe(struct dvb_frontend* fe, } // set bandwidth - switch(state->demod_type) { + switch (state->demod_type) { case TDA1004X_DEMOD_TDA10045: tda10045h_set_bandwidth(state, fe_params->u.ofdm.bandwidth); break; @@ -683,7 +718,8 @@ static int tda1004x_set_fe(struct dvb_frontend* fe, // set inversion inversion = fe_params->inversion; - if (state->config->invert) inversion = inversion ? INVERSION_OFF : INVERSION_ON; + if (state->config->invert) + inversion = inversion ? INVERSION_OFF : INVERSION_ON; switch (inversion) { case INVERSION_OFF: tda1004x_write_mask(state, TDA1004X_CONFC1, 0x20, 0); @@ -750,19 +786,19 @@ static int tda1004x_set_fe(struct dvb_frontend* fe, } // start the lock - switch(state->demod_type) { + switch (state->demod_type) { case TDA1004X_DEMOD_TDA10045: tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 0); - msleep(10); break; case TDA1004X_DEMOD_TDA10046: tda1004x_write_mask(state, TDA1004X_AUTO, 0x40, 0x40); - msleep(10); break; } + msleep(10); + return 0; } @@ -773,13 +809,13 @@ static int tda1004x_get_fe(struct dvb_frontend* fe, struct dvb_frontend_paramete // inversion status fe_params->inversion = INVERSION_OFF; - if (tda1004x_read_byte(state, TDA1004X_CONFC1) & 0x20) { + if (tda1004x_read_byte(state, TDA1004X_CONFC1) & 0x20) fe_params->inversion = INVERSION_ON; - } - if (state->config->invert) fe_params->inversion = fe_params->inversion ? INVERSION_OFF : INVERSION_ON; + if (state->config->invert) + fe_params->inversion = fe_params->inversion ? INVERSION_OFF : INVERSION_ON; // bandwidth - switch(state->demod_type) { + switch (state->demod_type) { case TDA1004X_DEMOD_TDA10045: switch (tda1004x_read_byte(state, TDA10045H_WREF_LSB)) { case 0x14: @@ -830,9 +866,8 @@ static int tda1004x_get_fe(struct dvb_frontend* fe, struct dvb_frontend_paramete // transmission mode fe_params->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; - if (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x10) { + if (tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x10) fe_params->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; - } // guard interval switch ((tda1004x_read_byte(state, TDA1004X_OUT_CONF1) & 0x0c) >> 2) { @@ -880,30 +915,33 @@ static int tda1004x_read_status(struct dvb_frontend* fe, fe_status_t * fe_status // read status status = tda1004x_read_byte(state, TDA1004X_STATUS_CD); - if (status == -1) { + if (status == -1) return -EIO; - } // decode *fe_status = 0; - if (status & 4) *fe_status |= FE_HAS_SIGNAL; - if (status & 2) *fe_status |= FE_HAS_CARRIER; - if (status & 8) *fe_status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + if (status & 4) + *fe_status |= FE_HAS_SIGNAL; + if (status & 2) + *fe_status |= FE_HAS_CARRIER; + if (status & 8) + *fe_status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; // if we don't already have VITERBI (i.e. not LOCKED), see if the viterbi // is getting anything valid if (!(*fe_status & FE_HAS_VITERBI)) { // read the CBER cber = tda1004x_read_byte(state, TDA1004X_CBER_LSB); - if (cber == -1) return -EIO; + if (cber == -1) + return -EIO; status = tda1004x_read_byte(state, TDA1004X_CBER_MSB); - if (status == -1) return -EIO; + if (status == -1) + return -EIO; cber |= (status << 8); tda1004x_read_byte(state, TDA1004X_CBER_RESET); - if (cber != 65535) { + if (cber != 65535) *fe_status |= FE_HAS_VITERBI; - } } // if we DO have some valid VITERBI output, but don't already have SYNC @@ -911,20 +949,22 @@ static int tda1004x_read_status(struct dvb_frontend* fe, fe_status_t * fe_status if ((*fe_status & FE_HAS_VITERBI) && (!(*fe_status & FE_HAS_SYNC))) { // read the VBER vber = tda1004x_read_byte(state, TDA1004X_VBER_LSB); - if (vber == -1) return -EIO; + if (vber == -1) + return -EIO; status = tda1004x_read_byte(state, TDA1004X_VBER_MID); - if (status == -1) return -EIO; + if (status == -1) + return -EIO; vber |= (status << 8); status = tda1004x_read_byte(state, TDA1004X_VBER_MSB); - if (status == -1) return -EIO; + if (status == -1) + return -EIO; vber |= ((status << 16) & 0x0f); tda1004x_read_byte(state, TDA1004X_CVBER_LUT); // if RS has passed some valid TS packets, then we must be // getting some SYNC bytes - if (vber < 16632) { + if (vber < 16632) *fe_status |= FE_HAS_SYNC; - } } // success @@ -941,7 +981,7 @@ static int tda1004x_read_signal_strength(struct dvb_frontend* fe, u16 * signal) dprintk("%s\n", __FUNCTION__); // determine the register to use - switch(state->demod_type) { + switch (state->demod_type) { case TDA1004X_DEMOD_TDA10045: reg = TDA10045H_S_AGC; break; @@ -972,9 +1012,8 @@ static int tda1004x_read_snr(struct dvb_frontend* fe, u16 * snr) tmp = tda1004x_read_byte(state, TDA1004X_SNR); if (tmp < 0) return -EIO; - if (tmp) { + if (tmp) tmp = 255 - tmp; - } *snr = ((tmp << 8) | tmp); dprintk("%s: snr=0x%x\n", __FUNCTION__, *snr); @@ -1009,11 +1048,11 @@ static int tda1004x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) break; } - if (tmp != 0x7f) { + if (tmp != 0x7f) *ucblocks = tmp; - } else { + else *ucblocks = 0xffffffff; - } + dprintk("%s: ucblocks=0x%x\n", __FUNCTION__, *ucblocks); return 0; } @@ -1027,10 +1066,12 @@ static int tda1004x_read_ber(struct dvb_frontend* fe, u32* ber) // read it in tmp = tda1004x_read_byte(state, TDA1004X_CBER_LSB); - if (tmp < 0) return -EIO; + if (tmp < 0) + return -EIO; *ber = tmp << 1; tmp = tda1004x_read_byte(state, TDA1004X_CBER_MSB); - if (tmp < 0) return -EIO; + if (tmp < 0) + return -EIO; *ber |= (tmp << 9); tda1004x_read_byte(state, TDA1004X_CBER_RESET); @@ -1042,7 +1083,7 @@ static int tda1004x_sleep(struct dvb_frontend* fe) { struct tda1004x_state* state = fe->demodulator_priv; - switch(state->demod_type) { + switch (state->demod_type) { case TDA1004X_DEMOD_TDA10045: tda1004x_write_mask(state, TDA1004X_CONFADC1, 0x10, 0x10); break; @@ -1066,74 +1107,11 @@ static int tda1004x_get_tune_settings(struct dvb_frontend* fe, struct dvb_fronte static void tda1004x_release(struct dvb_frontend* fe) { - struct tda1004x_state* state = (struct tda1004x_state*) fe->demodulator_priv; - kfree(state); -} - -static struct dvb_frontend_ops tda10045_ops; - -struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, - struct i2c_adapter* i2c) -{ - struct tda1004x_state* state = NULL; - - /* allocate memory for the internal state */ - state = (struct tda1004x_state*) kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); - if (state == NULL) goto error; - - /* setup the state */ - state->config = config; - state->i2c = i2c; - memcpy(&state->ops, &tda10045_ops, sizeof(struct dvb_frontend_ops)); - state->initialised = 0; - state->demod_type = TDA1004X_DEMOD_TDA10045; - - /* check if the demod is there */ - if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x25) goto error; - - /* create dvb_frontend */ - state->frontend.ops = &state->ops; - state->frontend.demodulator_priv = state; - return &state->frontend; - -error: + struct tda1004x_state *state = fe->demodulator_priv; kfree(state); - return NULL; -} - -static struct dvb_frontend_ops tda10046_ops; - -struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, - struct i2c_adapter* i2c) -{ - struct tda1004x_state* state = NULL; - - /* allocate memory for the internal state */ - state = (struct tda1004x_state*) kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); - if (state == NULL) goto error; - - /* setup the state */ - state->config = config; - state->i2c = i2c; - memcpy(&state->ops, &tda10046_ops, sizeof(struct dvb_frontend_ops)); - state->initialised = 0; - state->demod_type = TDA1004X_DEMOD_TDA10046; - - /* check if the demod is there */ - if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) goto error; - - /* create dvb_frontend */ - state->frontend.ops = &state->ops; - state->frontend.demodulator_priv = state; - return &state->frontend; - -error: - if (state) kfree(state); - return NULL; } static struct dvb_frontend_ops tda10045_ops = { - .info = { .name = "Philips TDA10045H DVB-T", .type = FE_OFDM, @@ -1163,8 +1141,36 @@ static struct dvb_frontend_ops tda10045_ops = { .read_ucblocks = tda1004x_read_ucblocks, }; -static struct dvb_frontend_ops tda10046_ops = { +struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, + struct i2c_adapter* i2c) +{ + struct tda1004x_state *state; + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); + if (!state) + return NULL; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + memcpy(&state->ops, &tda10045_ops, sizeof(struct dvb_frontend_ops)); + state->initialised = 0; + state->demod_type = TDA1004X_DEMOD_TDA10045; + + /* check if the demod is there */ + if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x25) { + kfree(state); + return NULL; + } + /* create dvb_frontend */ + state->frontend.ops = &state->ops; + state->frontend.demodulator_priv = state; + return &state->frontend; +} + +static struct dvb_frontend_ops tda10046_ops = { .info = { .name = "Philips TDA10046H DVB-T", .type = FE_OFDM, @@ -1194,6 +1200,36 @@ static struct dvb_frontend_ops tda10046_ops = { .read_ucblocks = tda1004x_read_ucblocks, }; +struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, + struct i2c_adapter* i2c) +{ + struct tda1004x_state *state; + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); + if (!state) + return NULL; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + memcpy(&state->ops, &tda10046_ops, sizeof(struct dvb_frontend_ops)); + state->initialised = 0; + state->demod_type = TDA1004X_DEMOD_TDA10046; + state->fw_version = 0x20; /* dummy default value */ + + /* check if the demod is there */ + if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) { + kfree(state); + return NULL; + } + + /* create dvb_frontend */ + state->frontend.ops = &state->ops; + state->frontend.demodulator_priv = state; + return &state->frontend; +} + module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h index e452fc0bad1..c8e1d54ff26 100644 --- a/drivers/media/dvb/frontends/tda1004x.h +++ b/drivers/media/dvb/frontends/tda1004x.h @@ -32,10 +32,13 @@ struct tda1004x_config u8 demod_address; /* does the "inversion" need inverted? */ - u8 invert:1; + u8 invert; /* Does the OCLK signal need inverted? */ - u8 invert_oclk:1; + u8 invert_oclk; + + /* value of N_I2C of the CONF_PLL3 register */ + u8 n_i2c; /* PLL maintenance */ int (*pll_init)(struct dvb_frontend* fe); diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb/frontends/tda8083.c index da82e90d6d1..168e013d23b 100644 --- a/drivers/media/dvb/frontends/tda8083.c +++ b/drivers/media/dvb/frontends/tda8083.c @@ -226,7 +226,7 @@ static int tda8083_send_diseqc_burst (struct tda8083_state* state, fe_sec_mini_c static int tda8083_send_diseqc_msg (struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *m) { - struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv; + struct tda8083_state* state = fe->demodulator_priv; int i; tda8083_writereg (state, 0x29, (m->msg_len - 3) | (1 << 2)); /* enable */ @@ -243,7 +243,7 @@ static int tda8083_send_diseqc_msg (struct dvb_frontend* fe, static int tda8083_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv; + struct tda8083_state* state = fe->demodulator_priv; u8 signal = ~tda8083_readreg (state, 0x01); u8 sync = tda8083_readreg (state, 0x02); @@ -270,7 +270,7 @@ static int tda8083_read_status(struct dvb_frontend* fe, fe_status_t* status) static int tda8083_read_signal_strength(struct dvb_frontend* fe, u16* strength) { - struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv; + struct tda8083_state* state = fe->demodulator_priv; u8 signal = ~tda8083_readreg (state, 0x01); *strength = (signal << 8) | signal; @@ -280,7 +280,7 @@ static int tda8083_read_signal_strength(struct dvb_frontend* fe, u16* strength) static int tda8083_read_snr(struct dvb_frontend* fe, u16* snr) { - struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv; + struct tda8083_state* state = fe->demodulator_priv; u8 _snr = tda8083_readreg (state, 0x08); *snr = (_snr << 8) | _snr; @@ -290,7 +290,7 @@ static int tda8083_read_snr(struct dvb_frontend* fe, u16* snr) static int tda8083_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv; + struct tda8083_state* state = fe->demodulator_priv; state->config->pll_set(fe, p); tda8083_set_inversion (state, p->inversion); @@ -305,7 +305,7 @@ static int tda8083_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static int tda8083_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv; + struct tda8083_state* state = fe->demodulator_priv; /* FIXME: get symbolrate & frequency offset...*/ /*p->frequency = ???;*/ @@ -319,7 +319,7 @@ static int tda8083_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static int tda8083_sleep(struct dvb_frontend* fe) { - struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv; + struct tda8083_state* state = fe->demodulator_priv; tda8083_writereg (state, 0x00, 0x02); return 0; @@ -327,7 +327,7 @@ static int tda8083_sleep(struct dvb_frontend* fe) static int tda8083_init(struct dvb_frontend* fe) { - struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv; + struct tda8083_state* state = fe->demodulator_priv; int i; for (i=0; i<44; i++) @@ -343,7 +343,7 @@ static int tda8083_init(struct dvb_frontend* fe) static int tda8083_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst) { - struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv; + struct tda8083_state* state = fe->demodulator_priv; tda8083_send_diseqc_burst (state, burst); tda8083_writereg (state, 0x00, 0x3c); @@ -354,7 +354,7 @@ static int tda8083_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t static int tda8083_diseqc_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) { - struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv; + struct tda8083_state* state = fe->demodulator_priv; tda8083_set_tone (state, tone); tda8083_writereg (state, 0x00, 0x3c); @@ -365,7 +365,7 @@ static int tda8083_diseqc_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t t static int tda8083_diseqc_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) { - struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv; + struct tda8083_state* state = fe->demodulator_priv; tda8083_set_voltage (state, voltage); tda8083_writereg (state, 0x00, 0x3c); @@ -376,7 +376,7 @@ static int tda8083_diseqc_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t static void tda8083_release(struct dvb_frontend* fe) { - struct tda8083_state* state = (struct tda8083_state*) fe->demodulator_priv; + struct tda8083_state* state = fe->demodulator_priv; kfree(state); } @@ -388,7 +388,7 @@ struct dvb_frontend* tda8083_attach(const struct tda8083_config* config, struct tda8083_state* state = NULL; /* allocate memory for the internal state */ - state = (struct tda8083_state*) kmalloc(sizeof(struct tda8083_state), GFP_KERNEL); + state = kmalloc(sizeof(struct tda8083_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/tda80xx.c b/drivers/media/dvb/frontends/tda80xx.c index c9963211428..032d348dafb 100644 --- a/drivers/media/dvb/frontends/tda80xx.c +++ b/drivers/media/dvb/frontends/tda80xx.c @@ -27,7 +27,7 @@ #include <linux/spinlock.h> #include <linux/threads.h> #include <linux/interrupt.h> -#include <asm/irq.h> +#include <linux/irq.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> @@ -400,7 +400,7 @@ static void tda80xx_wait_diseqc_fifo(struct tda80xx_state* state) static int tda8044_init(struct dvb_frontend* fe) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; int ret; /* @@ -432,7 +432,7 @@ static int tda8044_init(struct dvb_frontend* fe) static int tda8083_init(struct dvb_frontend* fe) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; tda80xx_write(state, 0x00, tda8083_inittab, sizeof(tda8083_inittab)); @@ -447,7 +447,7 @@ static int tda8083_init(struct dvb_frontend* fe) static int tda80xx_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; switch (voltage) { case SEC_VOLTAGE_13: @@ -463,7 +463,7 @@ static int tda80xx_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage static int tda80xx_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; switch (tone) { case SEC_TONE_OFF: @@ -477,7 +477,7 @@ static int tda80xx_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) static int tda80xx_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; if (cmd->msg_len > 6) return -EINVAL; @@ -492,7 +492,7 @@ static int tda80xx_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_ma static int tda80xx_send_diseqc_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t cmd) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; switch (cmd) { case SEC_MINI_A: @@ -512,7 +512,7 @@ static int tda80xx_send_diseqc_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t static int tda80xx_sleep(struct dvb_frontend* fe) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; tda80xx_writereg(state, 0x00, 0x02); /* enter standby */ @@ -521,7 +521,7 @@ static int tda80xx_sleep(struct dvb_frontend* fe) static int tda80xx_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; tda80xx_writereg(state, 0x1c, 0x80); state->config->pll_set(fe, p); @@ -537,7 +537,7 @@ static int tda80xx_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static int tda80xx_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; if (!state->config->irq) tda80xx_read_status_int(state); @@ -550,7 +550,7 @@ static int tda80xx_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static int tda80xx_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; if (!state->config->irq) tda80xx_read_status_int(state); @@ -561,7 +561,7 @@ static int tda80xx_read_status(struct dvb_frontend* fe, fe_status_t* status) static int tda80xx_read_ber(struct dvb_frontend* fe, u32* ber) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; int ret; u8 buf[3]; @@ -575,7 +575,7 @@ static int tda80xx_read_ber(struct dvb_frontend* fe, u32* ber) static int tda80xx_read_signal_strength(struct dvb_frontend* fe, u16* strength) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; u8 gain = ~tda80xx_readreg(state, 0x01); *strength = (gain << 8) | gain; @@ -585,7 +585,7 @@ static int tda80xx_read_signal_strength(struct dvb_frontend* fe, u16* strength) static int tda80xx_read_snr(struct dvb_frontend* fe, u16* snr) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; u8 quality = tda80xx_readreg(state, 0x08); *snr = (quality << 8) | quality; @@ -595,7 +595,7 @@ static int tda80xx_read_snr(struct dvb_frontend* fe, u16* snr) static int tda80xx_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; *ucblocks = tda80xx_readreg(state, 0x0f); if (*ucblocks == 0xff) @@ -606,7 +606,7 @@ static int tda80xx_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) static int tda80xx_init(struct dvb_frontend* fe) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; switch(state->id) { case ID_TDA8044: @@ -620,7 +620,7 @@ static int tda80xx_init(struct dvb_frontend* fe) static void tda80xx_release(struct dvb_frontend* fe) { - struct tda80xx_state* state = (struct tda80xx_state*) fe->demodulator_priv; + struct tda80xx_state* state = fe->demodulator_priv; if (state->config->irq) free_irq(state->config->irq, &state->worklet); @@ -637,7 +637,7 @@ struct dvb_frontend* tda80xx_attach(const struct tda80xx_config* config, int ret; /* allocate memory for the internal state */ - state = (struct tda80xx_state*) kmalloc(sizeof(struct tda80xx_state), GFP_KERNEL); + state = kmalloc(sizeof(struct tda80xx_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/frontends/ves1820.c b/drivers/media/dvb/frontends/ves1820.c index 9c0d23e1d9e..70fb44b391a 100644 --- a/drivers/media/dvb/frontends/ves1820.c +++ b/drivers/media/dvb/frontends/ves1820.c @@ -70,7 +70,6 @@ static int ves1820_writereg(struct ves1820_state *state, u8 reg, u8 data) printk("ves1820: %s(): writereg error (reg == 0x%02x," "val == 0x%02x, ret == %i)\n", __FUNCTION__, reg, data, ret); - msleep(10); return (ret != 1) ? -EREMOTEIO : 0; } @@ -193,7 +192,7 @@ static int ves1820_set_symbolrate(struct ves1820_state *state, u32 symbolrate) static int ves1820_init(struct dvb_frontend* fe) { - struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv; + struct ves1820_state* state = fe->demodulator_priv; int i; int val; @@ -214,7 +213,7 @@ static int ves1820_init(struct dvb_frontend* fe) static int ves1820_set_parameters(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv; + struct ves1820_state* state = fe->demodulator_priv; static const u8 reg0x00[] = { 0x00, 0x04, 0x08, 0x0c, 0x10 }; static const u8 reg0x01[] = { 140, 140, 106, 100, 92 }; static const u8 reg0x05[] = { 135, 100, 70, 54, 38 }; @@ -241,7 +240,7 @@ static int ves1820_set_parameters(struct dvb_frontend* fe, struct dvb_frontend_p static int ves1820_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv; + struct ves1820_state* state = fe->demodulator_priv; int sync; *status = 0; @@ -267,7 +266,7 @@ static int ves1820_read_status(struct dvb_frontend* fe, fe_status_t* status) static int ves1820_read_ber(struct dvb_frontend* fe, u32* ber) { - struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv; + struct ves1820_state* state = fe->demodulator_priv; u32 _ber = ves1820_readreg(state, 0x14) | (ves1820_readreg(state, 0x15) << 8) | @@ -279,7 +278,7 @@ static int ves1820_read_ber(struct dvb_frontend* fe, u32* ber) static int ves1820_read_signal_strength(struct dvb_frontend* fe, u16* strength) { - struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv; + struct ves1820_state* state = fe->demodulator_priv; u8 gain = ves1820_readreg(state, 0x17); *strength = (gain << 8) | gain; @@ -289,7 +288,7 @@ static int ves1820_read_signal_strength(struct dvb_frontend* fe, u16* strength) static int ves1820_read_snr(struct dvb_frontend* fe, u16* snr) { - struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv; + struct ves1820_state* state = fe->demodulator_priv; u8 quality = ~ves1820_readreg(state, 0x18); *snr = (quality << 8) | quality; @@ -299,7 +298,7 @@ static int ves1820_read_snr(struct dvb_frontend* fe, u16* snr) static int ves1820_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv; + struct ves1820_state* state = fe->demodulator_priv; *ucblocks = ves1820_readreg(state, 0x13) & 0x7f; if (*ucblocks == 0x7f) @@ -314,7 +313,7 @@ static int ves1820_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) static int ves1820_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv; + struct ves1820_state* state = fe->demodulator_priv; int sync; s8 afc = 0; @@ -345,7 +344,7 @@ static int ves1820_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static int ves1820_sleep(struct dvb_frontend* fe) { - struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv; + struct ves1820_state* state = fe->demodulator_priv; ves1820_writereg(state, 0x1b, 0x02); /* pdown ADC */ ves1820_writereg(state, 0x00, 0x80); /* standby */ @@ -364,7 +363,7 @@ static int ves1820_get_tune_settings(struct dvb_frontend* fe, struct dvb_fronten static void ves1820_release(struct dvb_frontend* fe) { - struct ves1820_state* state = (struct ves1820_state*) fe->demodulator_priv; + struct ves1820_state* state = fe->demodulator_priv; kfree(state); } @@ -377,7 +376,7 @@ struct dvb_frontend* ves1820_attach(const struct ves1820_config* config, struct ves1820_state* state = NULL; /* allocate memory for the internal state */ - state = (struct ves1820_state*) kmalloc(sizeof(struct ves1820_state), GFP_KERNEL); + state = kmalloc(sizeof(struct ves1820_state), GFP_KERNEL); if (state == NULL) goto error; diff --git a/drivers/media/dvb/frontends/ves1x93.c b/drivers/media/dvb/frontends/ves1x93.c index edcad283aa8..821df8e839d 100644 --- a/drivers/media/dvb/frontends/ves1x93.c +++ b/drivers/media/dvb/frontends/ves1x93.c @@ -263,7 +263,7 @@ static int ves1x93_set_symbolrate (struct ves1x93_state* state, u32 srate) static int ves1x93_init (struct dvb_frontend* fe) { - struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; + struct ves1x93_state* state = fe->demodulator_priv; int i; int val; @@ -289,7 +289,7 @@ static int ves1x93_init (struct dvb_frontend* fe) static int ves1x93_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage) { - struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; + struct ves1x93_state* state = fe->demodulator_priv; switch (voltage) { case SEC_VOLTAGE_13: @@ -305,7 +305,7 @@ static int ves1x93_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltag static int ves1x93_read_status(struct dvb_frontend* fe, fe_status_t* status) { - struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; + struct ves1x93_state* state = fe->demodulator_priv; u8 sync = ves1x93_readreg (state, 0x0e); @@ -346,7 +346,7 @@ static int ves1x93_read_status(struct dvb_frontend* fe, fe_status_t* status) static int ves1x93_read_ber(struct dvb_frontend* fe, u32* ber) { - struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; + struct ves1x93_state* state = fe->demodulator_priv; *ber = ves1x93_readreg (state, 0x15); *ber |= (ves1x93_readreg (state, 0x16) << 8); @@ -358,7 +358,7 @@ static int ves1x93_read_ber(struct dvb_frontend* fe, u32* ber) static int ves1x93_read_signal_strength(struct dvb_frontend* fe, u16* strength) { - struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; + struct ves1x93_state* state = fe->demodulator_priv; u8 signal = ~ves1x93_readreg (state, 0x0b); *strength = (signal << 8) | signal; @@ -368,7 +368,7 @@ static int ves1x93_read_signal_strength(struct dvb_frontend* fe, u16* strength) static int ves1x93_read_snr(struct dvb_frontend* fe, u16* snr) { - struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; + struct ves1x93_state* state = fe->demodulator_priv; u8 _snr = ~ves1x93_readreg (state, 0x1c); *snr = (_snr << 8) | _snr; @@ -378,7 +378,7 @@ static int ves1x93_read_snr(struct dvb_frontend* fe, u16* snr) static int ves1x93_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { - struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; + struct ves1x93_state* state = fe->demodulator_priv; *ucblocks = ves1x93_readreg (state, 0x18) & 0x7f; @@ -393,7 +393,7 @@ static int ves1x93_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) static int ves1x93_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; + struct ves1x93_state* state = fe->demodulator_priv; ves1x93_writereg(state, 0x00, 0x11); state->config->pll_set(fe, p); @@ -408,7 +408,7 @@ static int ves1x93_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static int ves1x93_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) { - struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; + struct ves1x93_state* state = fe->demodulator_priv; int afc; afc = ((int)((char)(ves1x93_readreg (state, 0x0a) << 1)))/2; @@ -431,14 +431,14 @@ static int ves1x93_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par static int ves1x93_sleep(struct dvb_frontend* fe) { - struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; + struct ves1x93_state* state = fe->demodulator_priv; return ves1x93_writereg (state, 0x00, 0x08); } static void ves1x93_release(struct dvb_frontend* fe) { - struct ves1x93_state* state = (struct ves1x93_state*) fe->demodulator_priv; + struct ves1x93_state* state = fe->demodulator_priv; kfree(state); } @@ -451,7 +451,7 @@ struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config, u8 identity; /* allocate memory for the internal state */ - state = (struct ves1x93_state*) kmalloc(sizeof(struct ves1x93_state), GFP_KERNEL); + state = kmalloc(sizeof(struct ves1x93_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 922c205a265..8e33a850e13 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -130,7 +130,7 @@ static void init_av7110_av(struct av7110 *av7110) av7110->current_input = 0; if (i2c_writereg(av7110, 0x20, 0x00, 0x00) == 1) { printk ("dvb-ttpci: Crystal audio DAC @ card %d detected\n", - av7110->dvb_adapter->num); + av7110->dvb_adapter.num); av7110->adac_type = DVB_ADAC_CRYSTAL; i2c_writereg(av7110, 0x20, 0x01, 0xd2); i2c_writereg(av7110, 0x20, 0x02, 0x49); @@ -145,13 +145,13 @@ static void init_av7110_av(struct av7110 *av7110) } else if (dev->pci->subsystem_vendor == 0x110a) { printk("dvb-ttpci: DVB-C w/o analog module @ card %d detected\n", - av7110->dvb_adapter->num); + av7110->dvb_adapter.num); av7110->adac_type = DVB_ADAC_NONE; } else { av7110->adac_type = adac; printk("dvb-ttpci: adac type set to %d @ card %d\n", - av7110->dvb_adapter->num, av7110->adac_type); + av7110->dvb_adapter.num, av7110->adac_type); } if (av7110->adac_type == DVB_ADAC_NONE || av7110->adac_type == DVB_ADAC_MSP) { @@ -231,7 +231,7 @@ static int arm_thread(void *data) if (newloops == av7110->arm_loops) { printk(KERN_ERR "dvb-ttpci: ARM crashed @ card %d\n", - av7110->dvb_adapter->num); + av7110->dvb_adapter.num); arm_error(av7110); av7710_set_video_mode(av7110, vidmode); @@ -1282,7 +1282,7 @@ static int av7110_register(struct av7110 *av7110) av7110->dmxdev.demux = &dvbdemux->dmx; av7110->dmxdev.capabilities = 0; - dvb_dmxdev_init(&av7110->dmxdev, av7110->dvb_adapter); + dvb_dmxdev_init(&av7110->dmxdev, &av7110->dvb_adapter); av7110->hw_frontend.source = DMX_FRONTEND_0; @@ -1307,11 +1307,11 @@ static int av7110_register(struct av7110 *av7110) av7110_ca_register(av7110); #ifdef CONFIG_DVB_AV7110_OSD - dvb_register_device(av7110->dvb_adapter, &av7110->osd_dev, + dvb_register_device(&av7110->dvb_adapter, &av7110->osd_dev, &dvbdev_osd, av7110, DVB_DEVICE_OSD); #endif - dvb_net_init(av7110->dvb_adapter, &av7110->dvb_net, &dvbdemux->dmx); + dvb_net_init(&av7110->dvb_adapter, &av7110->dvb_net, &dvbdemux->dmx); if (budgetpatch) { /* initialize software demux1 without its own frontend @@ -1334,9 +1334,9 @@ static int av7110_register(struct av7110 *av7110) av7110->dmxdev1.demux = &dvbdemux1->dmx; av7110->dmxdev1.capabilities = 0; - dvb_dmxdev_init(&av7110->dmxdev1, av7110->dvb_adapter); + dvb_dmxdev_init(&av7110->dmxdev1, &av7110->dvb_adapter); - dvb_net_init(av7110->dvb_adapter, &av7110->dvb_net1, &dvbdemux1->dmx); + dvb_net_init(&av7110->dvb_adapter, &av7110->dvb_net1, &dvbdemux1->dmx); printk("dvb-ttpci: additional demux1 for budget-patch registered\n"); } return 0; @@ -1673,6 +1673,106 @@ static struct stv0299_config alps_bsru6_config = { }; +static u8 alps_bsbe1_inittab[] = { + 0x01, 0x15, + 0x02, 0x30, + 0x03, 0x00, + 0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */ + 0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */ + 0x06, 0x40, /* DAC not used, set to high impendance mode */ + 0x07, 0x00, /* DAC LSB */ + 0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */ + 0x09, 0x00, /* FIFO */ + 0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */ + 0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */ + 0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */ + 0x10, 0x3f, // AGC2 0x3d + 0x11, 0x84, + 0x12, 0xb5, // Lock detect: -64 Carrier freq detect:on + 0x15, 0xc9, // lock detector threshold + 0x16, 0x00, + 0x17, 0x00, + 0x18, 0x00, + 0x19, 0x00, + 0x1a, 0x00, + 0x1f, 0x50, + 0x20, 0x00, + 0x21, 0x00, + 0x22, 0x00, + 0x23, 0x00, + 0x28, 0x00, // out imp: normal out type: parallel FEC mode:0 + 0x29, 0x1e, // 1/2 threshold + 0x2a, 0x14, // 2/3 threshold + 0x2b, 0x0f, // 3/4 threshold + 0x2c, 0x09, // 5/6 threshold + 0x2d, 0x05, // 7/8 threshold + 0x2e, 0x01, + 0x31, 0x1f, // test all FECs + 0x32, 0x19, // viterbi and synchro search + 0x33, 0xfc, // rs control + 0x34, 0x93, // error control + 0x0f, 0x92, + 0xff, 0xff +}; + +static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) +{ + struct av7110* av7110 = (struct av7110*) fe->dvb->priv; + int ret; + u8 data[4]; + u32 div; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + + if ((params->frequency < 950000) || (params->frequency > 2150000)) + return -EINVAL; + + div = (params->frequency + (125 - 1)) / 125; // round correctly + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x80 | ((div & 0x18000) >> 10) | 4; + data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4; + + ret = i2c_transfer(&av7110->i2c_adap, &msg, 1); + return (ret != 1) ? -EIO : 0; +} + +static struct stv0299_config alps_bsbe1_config = { + .demod_address = 0x68, + .inittab = alps_bsbe1_inittab, + .mclk = 88000000UL, + .invert = 1, + .enhanced_tuning = 0, + .skip_reinit = 0, + .min_delay_ms = 100, + .set_symbol_rate = alps_bsru6_set_symbol_rate, + .pll_set = alps_bsbe1_pll_set, +}; + +static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) +{ + struct av7110* av7110 = (struct av7110*) fe->dvb->priv; + int ret; + u8 data[1]; + struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = data, .len = sizeof(data) }; + + switch(voltage) { + case SEC_VOLTAGE_OFF: + data[0] = 0x00; + break; + case SEC_VOLTAGE_13: + data[0] = 0x44; + break; + case SEC_VOLTAGE_18: + data[0] = 0x4c; + break; + default: + return -EINVAL; + }; + + ret = i2c_transfer(&av7110->i2c_adap, &msg, 1); + return (ret != 1) ? -EIO : 0; +} + static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { @@ -2116,6 +2216,14 @@ static int frontend_init(struct av7110 *av7110) av7110->dev->i2c_bitrate = SAA7146_I2C_BUS_BIT_RATE_240; break; } + break; + + case 0x000E: /* Hauppauge/TT Nexus-S rev 2.3 */ + /* ALPS BSBE1 */ + av7110->fe = stv0299_attach(&alps_bsbe1_config, &av7110->i2c_adap); + if (av7110->fe) + av7110->fe->ops->set_voltage = lnbp21_set_voltage; + break; } } @@ -2138,7 +2246,7 @@ static int frontend_init(struct av7110 *av7110) FE_FUNC_OVERRIDE(av7110->fe->ops->dishnetwork_send_legacy_command, av7110->fe_dishnetwork_send_legacy_command, av7110_fe_dishnetwork_send_legacy_command); FE_FUNC_OVERRIDE(av7110->fe->ops->set_frontend, av7110->fe_set_frontend, av7110_fe_set_frontend); - ret = dvb_register_frontend(av7110->dvb_adapter, av7110->fe); + ret = dvb_register_frontend(&av7110->dvb_adapter, av7110->fe); if (ret < 0) { printk("av7110: Frontend registration failed!\n"); if (av7110->fe->ops->release) @@ -2352,7 +2460,7 @@ static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_d goto err_dvb_unregister_adapter_2; ttpci_eeprom_parse_mac(&av7110->i2c_adap, - av7110->dvb_adapter->proposed_mac); + av7110->dvb_adapter.proposed_mac); ret = -ENOMEM; if (budgetpatch) { @@ -2523,7 +2631,7 @@ static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_d if (ret < 0) goto err_av7110_unregister_11; - av7110->dvb_adapter->priv = av7110; + av7110->dvb_adapter.priv = av7110; ret = frontend_init(av7110); if (ret < 0) goto err_av7110_exit_v4l_12; @@ -2558,7 +2666,7 @@ err_saa71466_vfree_4: err_i2c_del_3: i2c_del_adapter(&av7110->i2c_adap); err_dvb_unregister_adapter_2: - dvb_unregister_adapter(av7110->dvb_adapter); + dvb_unregister_adapter(&av7110->dvb_adapter); err_put_firmware_1: put_firmware(av7110); err_kfree_0: @@ -2604,7 +2712,7 @@ static int av7110_detach(struct saa7146_dev* saa) i2c_del_adapter(&av7110->i2c_adap); - dvb_unregister_adapter (av7110->dvb_adapter); + dvb_unregister_adapter (&av7110->dvb_adapter); av7110_num--; @@ -2672,21 +2780,23 @@ MAKE_AV7110_INFO(ttt_1_X, "Technotrend/Hauppauge WinTV DVB-T rev1.X"); MAKE_AV7110_INFO(ttc_1_X, "Technotrend/Hauppauge WinTV Nexus-CA rev1.X"); MAKE_AV7110_INFO(ttc_2_X, "Technotrend/Hauppauge WinTV DVB-C rev2.X"); MAKE_AV7110_INFO(tts_2_X, "Technotrend/Hauppauge WinTV Nexus-S rev2.X"); +MAKE_AV7110_INFO(tts_2_3, "Technotrend/Hauppauge WinTV Nexus-S rev2.3"); MAKE_AV7110_INFO(tts_1_3se, "Technotrend/Hauppauge WinTV DVB-S rev1.3 SE"); MAKE_AV7110_INFO(ttt, "Technotrend/Hauppauge DVB-T"); MAKE_AV7110_INFO(fsc, "Fujitsu Siemens DVB-C"); MAKE_AV7110_INFO(fss, "Fujitsu Siemens DVB-S rev1.6"); static struct pci_device_id pci_tbl[] = { + MAKE_EXTENSION_PCI(fsc, 0x110a, 0x0000), MAKE_EXTENSION_PCI(tts_1_X, 0x13c2, 0x0000), MAKE_EXTENSION_PCI(ttt_1_X, 0x13c2, 0x0001), MAKE_EXTENSION_PCI(ttc_2_X, 0x13c2, 0x0002), MAKE_EXTENSION_PCI(tts_2_X, 0x13c2, 0x0003), - MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002), - MAKE_EXTENSION_PCI(fsc, 0x110a, 0x0000), - MAKE_EXTENSION_PCI(ttc_1_X, 0x13c2, 0x000a), MAKE_EXTENSION_PCI(fss, 0x13c2, 0x0006), MAKE_EXTENSION_PCI(ttt, 0x13c2, 0x0008), + MAKE_EXTENSION_PCI(ttc_1_X, 0x13c2, 0x000a), + MAKE_EXTENSION_PCI(tts_2_3, 0x13c2, 0x000e), + MAKE_EXTENSION_PCI(tts_1_3se, 0x13c2, 0x1002), /* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0004), UNDEFINED CARD */ // Galaxis DVB PC-Sat-Carte /* MAKE_EXTENSION_PCI(???, 0x13c2, 0x0005), UNDEFINED CARD */ // Technisat SkyStar1 diff --git a/drivers/media/dvb/ttpci/av7110.h b/drivers/media/dvb/ttpci/av7110.h index 5070e0523da..4f69b4d0147 100644 --- a/drivers/media/dvb/ttpci/av7110.h +++ b/drivers/media/dvb/ttpci/av7110.h @@ -220,7 +220,7 @@ struct av7110 { struct audio_mixer mixer; - struct dvb_adapter *dvb_adapter; + struct dvb_adapter dvb_adapter; struct dvb_device *video_dev; struct dvb_device *audio_dev; struct dvb_device *ca_dev; @@ -274,7 +274,6 @@ extern void av7110_ir_exit (void); extern int i2c_writereg(struct av7110 *av7110, u8 id, u8 reg, u8 val); extern u8 i2c_readreg(struct av7110 *av7110, u8 id, u8 reg); extern int msp_writereg(struct av7110 *av7110, u8 dev, u16 reg, u16 val); -extern int msp_readreg(struct av7110 *av7110, u8 dev, u16 reg, u16 *val); extern int av7110_init_analog_module(struct av7110 *av7110); diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c index d77e8a00688..ccf946125d0 100644 --- a/drivers/media/dvb/ttpci/av7110_av.c +++ b/drivers/media/dvb/ttpci/av7110_av.c @@ -1075,7 +1075,7 @@ static int dvb_video_ioctl(struct inode *inode, struct file *file, } if (ret < 0) break; - av7110->videostate.video_format = format; + av7110->videostate.display_format = format; ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetPanScanType, 1, (u16) val); break; @@ -1230,14 +1230,20 @@ static int dvb_audio_ioctl(struct inode *inode, struct file *file, switch(av7110->audiostate.channel_select) { case AUDIO_STEREO: audcom(av7110, AUDIO_CMD_STEREO); + if (av7110->adac_type == DVB_ADAC_CRYSTAL) + i2c_writereg(av7110, 0x20, 0x02, 0x49); break; case AUDIO_MONO_LEFT: audcom(av7110, AUDIO_CMD_MONO_L); + if (av7110->adac_type == DVB_ADAC_CRYSTAL) + i2c_writereg(av7110, 0x20, 0x02, 0x4a); break; case AUDIO_MONO_RIGHT: audcom(av7110, AUDIO_CMD_MONO_R); + if (av7110->adac_type == DVB_ADAC_CRYSTAL) + i2c_writereg(av7110, 0x20, 0x02, 0x45); break; default: @@ -1409,10 +1415,10 @@ int av7110_av_register(struct av7110 *av7110) av7110->video_events.overflow = 0; memset(&av7110->video_size, 0, sizeof (video_size_t)); - dvb_register_device(av7110->dvb_adapter, &av7110->video_dev, + dvb_register_device(&av7110->dvb_adapter, &av7110->video_dev, &dvbdev_video, av7110, DVB_DEVICE_VIDEO); - dvb_register_device(av7110->dvb_adapter, &av7110->audio_dev, + dvb_register_device(&av7110->dvb_adapter, &av7110->audio_dev, &dvbdev_audio, av7110, DVB_DEVICE_AUDIO); return 0; diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c index 21f7aacf772..c3801e328fe 100644 --- a/drivers/media/dvb/ttpci/av7110_ca.c +++ b/drivers/media/dvb/ttpci/av7110_ca.c @@ -123,7 +123,7 @@ static void ci_ll_release(struct dvb_ringbuffer *cirbuf, struct dvb_ringbuffer * } static int ci_ll_reset(struct dvb_ringbuffer *cibuf, struct file *file, - int slots, ca_slot_info_t *slot) + int slots, ca_slot_info_t *slot) { int i; int len = 0; @@ -370,7 +370,7 @@ static struct dvb_device dvbdev_ca = { int av7110_ca_register(struct av7110 *av7110) { - return dvb_register_device(av7110->dvb_adapter, &av7110->ca_dev, + return dvb_register_device(&av7110->dvb_adapter, &av7110->ca_dev, &dvbdev_ca, av7110, DVB_DEVICE_CA); } diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c index bd6e5ea4aef..7fa4a0ebe13 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.c +++ b/drivers/media/dvb/ttpci/av7110_hw.c @@ -104,7 +104,7 @@ u32 av7110_debiread(struct av7110 *av7110, u32 config, int addr, int count) /* av7110 ARM core boot stuff */ - +#if 0 void av7110_reset_arm(struct av7110 *av7110) { saa7146_setgpio(av7110->dev, RESET_LINE, SAA7146_GPIO_OUTLO); @@ -124,7 +124,7 @@ void av7110_reset_arm(struct av7110 *av7110) av7110->arm_ready = 1; dprintk(1, "reset ARM\n"); } - +#endif /* 0 */ static int waitdebi(struct av7110 *av7110, int adr, int state) { @@ -335,7 +335,7 @@ int av7110_wait_msgstate(struct av7110 *av7110, u16 flags) return 0; } -int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) +static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) { int i; unsigned long start; @@ -455,7 +455,7 @@ int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) return 0; } -int av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) +static int av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) { int ret; @@ -500,6 +500,7 @@ int av7110_fw_cmd(struct av7110 *av7110, int type, int com, int num, ...) return ret; } +#if 0 int av7110_send_ci_cmd(struct av7110 *av7110, u8 subcom, u8 *buf, u8 len) { int i, ret; @@ -521,6 +522,7 @@ int av7110_send_ci_cmd(struct av7110 *av7110, u8 subcom, u8 *buf, u8 len) printk(KERN_ERR "dvb-ttpci: av7110_send_ci_cmd error %d\n", ret); return ret; } +#endif /* 0 */ int av7110_fw_request(struct av7110 *av7110, u16 *request_buf, int request_buf_len, u16 *reply_buf, int reply_buf_len) @@ -593,7 +595,7 @@ int av7110_fw_request(struct av7110 *av7110, u16 *request_buf, return 0; } -int av7110_fw_query(struct av7110 *av7110, u16 tag, u16* buf, s16 length) +static int av7110_fw_query(struct av7110 *av7110, u16 tag, u16* buf, s16 length) { int ret; ret = av7110_fw_request(av7110, &tag, 0, buf, length); @@ -617,7 +619,7 @@ int av7110_firmversion(struct av7110 *av7110) if (av7110_fw_query(av7110, tag, buf, 16)) { printk("dvb-ttpci: failed to boot firmware @ card %d\n", - av7110->dvb_adapter->num); + av7110->dvb_adapter.num); return -EIO; } @@ -628,16 +630,16 @@ int av7110_firmversion(struct av7110 *av7110) av7110->avtype = (buf[8] << 16) + buf[9]; printk("dvb-ttpci: info @ card %d: firm %08x, rtsl %08x, vid %08x, app %08x\n", - av7110->dvb_adapter->num, av7110->arm_fw, + av7110->dvb_adapter.num, av7110->arm_fw, av7110->arm_rtsl, av7110->arm_vid, av7110->arm_app); /* print firmware capabilities */ if (FW_CI_LL_SUPPORT(av7110->arm_app)) printk("dvb-ttpci: firmware @ card %d supports CI link layer interface\n", - av7110->dvb_adapter->num); + av7110->dvb_adapter.num); else printk("dvb-ttpci: no firmware support for CI link layer interface @ card %d\n", - av7110->dvb_adapter->num); + av7110->dvb_adapter.num); return 0; } diff --git a/drivers/media/dvb/ttpci/av7110_hw.h b/drivers/media/dvb/ttpci/av7110_hw.h index bf901c62468..52061e17c6d 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.h +++ b/drivers/media/dvb/ttpci/av7110_hw.h @@ -364,7 +364,6 @@ enum av7110_command_type { -extern void av7110_reset_arm(struct av7110 *av7110); extern int av7110_bootarm(struct av7110 *av7110); extern int av7110_firmversion(struct av7110 *av7110); #define FW_CI_LL_SUPPORT(arm_app) ((arm_app) & 0x80000000) @@ -373,12 +372,8 @@ extern int av7110_firmversion(struct av7110 *av7110); extern int av7110_wait_msgstate(struct av7110 *av7110, u16 flags); extern int av7110_fw_cmd(struct av7110 *av7110, int type, int com, int num, ...); -extern int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length); -extern int av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length); -extern int av7110_send_ci_cmd(struct av7110 *av7110, u8 subcom, u8 *buf, u8 len); extern int av7110_fw_request(struct av7110 *av7110, u16 *request_buf, int request_buf_len, u16 *reply_buf, int reply_buf_len); -extern int av7110_fw_query(struct av7110 *av7110, u16 tag, u16* Buff, s16 length); /* DEBI (saa7146 data extension bus interface) access */ diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c index 6d2256f1e35..665cdb8a3f7 100644 --- a/drivers/media/dvb/ttpci/av7110_ir.c +++ b/drivers/media/dvb/ttpci/av7110_ir.c @@ -10,7 +10,7 @@ #define UP_TIMEOUT (HZ/4) -/* enable ir debugging by or'ing av7110_debug with 16 */ +/* enable ir debugging by or'ing debug with 16 */ static int ir_initialized; static struct input_dev input_dev; diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c index eb84fb08d95..e65fc36e2ce 100644 --- a/drivers/media/dvb/ttpci/av7110_v4l.c +++ b/drivers/media/dvb/ttpci/av7110_v4l.c @@ -46,13 +46,13 @@ int msp_writereg(struct av7110 *av7110, u8 dev, u16 reg, u16 val) if (i2c_transfer(&av7110->i2c_adap, &msgs, 1) != 1) { dprintk(1, "dvb-ttpci: failed @ card %d, %u = %u\n", - av7110->dvb_adapter->num, reg, val); + av7110->dvb_adapter.num, reg, val); return -EIO; } return 0; } -int msp_readreg(struct av7110 *av7110, u8 dev, u16 reg, u16 *val) +static int msp_readreg(struct av7110 *av7110, u8 dev, u16 reg, u16 *val) { u8 msg1[3] = { dev, reg >> 8, reg & 0xff }; u8 msg2[2]; @@ -63,7 +63,7 @@ int msp_readreg(struct av7110 *av7110, u8 dev, u16 reg, u16 *val) if (i2c_transfer(&av7110->i2c_adap, &msgs[0], 2) != 2) { dprintk(1, "dvb-ttpci: failed @ card %d, %u\n", - av7110->dvb_adapter->num, reg); + av7110->dvb_adapter.num, reg); return -EIO; } *val = (msg2[0] << 8) | msg2[1]; @@ -552,13 +552,13 @@ int av7110_init_analog_module(struct av7110 *av7110) return -ENODEV; printk("dvb-ttpci: DVB-C analog module @ card %d detected, initializing MSP3400\n", - av7110->dvb_adapter->num); + av7110->dvb_adapter.num); av7110->adac_type = DVB_ADAC_MSP; msleep(100); // the probing above resets the msp... msp_readreg(av7110, MSP_RD_DSP, 0x001e, &version1); msp_readreg(av7110, MSP_RD_DSP, 0x001f, &version2); dprintk(1, "dvb-ttpci: @ card %d MSP3400 version 0x%04x 0x%04x\n", - av7110->dvb_adapter->num, version1, version2); + av7110->dvb_adapter.num, version1, version2); msp_writereg(av7110, MSP_WR_DSP, 0x0013, 0x0c00); msp_writereg(av7110, MSP_WR_DSP, 0x0000, 0x7f00); // loudspeaker + headphone msp_writereg(av7110, MSP_WR_DSP, 0x0008, 0x0220); // loudspeaker source @@ -596,7 +596,7 @@ int av7110_init_analog_module(struct av7110 *av7110) /* init the saa7113 */ while (*i != 0xff) { if (i2c_writereg(av7110, 0x48, i[0], i[1]) != 1) { - dprintk(1, "saa7113 initialization failed @ card %d", av7110->dvb_adapter->num); + dprintk(1, "saa7113 initialization failed @ card %d", av7110->dvb_adapter.num); break; } i += 2; @@ -726,11 +726,11 @@ static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std) { struct av7110 *av7110 = (struct av7110*) dev->ext_priv; - if (std->id == V4L2_STD_PAL) { + if (std->id & V4L2_STD_PAL) { av7110->vidmode = VIDEO_MODE_PAL; av7110_set_vidmode(av7110, av7110->vidmode); } - else if (std->id == V4L2_STD_NTSC) { + else if (std->id & V4L2_STD_NTSC) { av7110->vidmode = VIDEO_MODE_NTSC; av7110_set_vidmode(av7110, av7110->vidmode); } diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c index 14e963206b8..6e0f5d307c5 100644 --- a/drivers/media/dvb/ttpci/budget-av.c +++ b/drivers/media/dvb/ttpci/budget-av.c @@ -59,8 +59,12 @@ struct budget_av { struct dvb_ca_en50221 ca; }; -static int enable_ci = 0; - +/* GPIO CI Connections: + * 0 - Vcc/Reset (Reset is controlled by capacitor) + * 1 - Attribute Memory + * 2 - Card Enable (Active Low) + * 3 - Card Detect + */ /**************************************************************************** * INITIALIZATION @@ -188,22 +192,35 @@ static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) { struct budget_av *budget_av = (struct budget_av *) ca->data; struct saa7146_dev *saa = budget_av->budget.dev; - int max = 20; + int timeout = 50; // 5 seconds (4.4.6 Ready) if (slot != 0) return -EINVAL; dprintk(1, "ciintf_slot_reset\n"); - /* reset the card */ - saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); - msleep(100); - saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); + saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ - while (--max > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d) + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */ + msleep(2); + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); /* Vcc on */ + msleep(20); /* 20 ms Vcc settling time */ + + saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); /* enable card */ + + /* This should have been based on pin 16 READY of the pcmcia port, + * but AFAICS it is not routed to the saa7146 */ + while (--timeout > 0 && ciintf_read_attribute_mem(ca, slot, 0) != 0x1d) msleep(100); - ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); + if (timeout <= 0) + { + printk(KERN_ERR "budget-av: cam reset failed (timeout).\n"); + saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */ + return -ETIMEDOUT; + } + return 0; } @@ -240,7 +257,6 @@ static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open { struct budget_av *budget_av = (struct budget_av *) ca->data; struct saa7146_dev *saa = budget_av->budget.dev; - int cam = 0; if (slot != 0) return -EINVAL; @@ -248,15 +264,21 @@ static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open if (!budget_av->slot_status) { saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); udelay(1); - cam = saa7146_read(saa, PSR) & MASK_06; - saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); - - if (cam) + if (saa7146_read(saa, PSR) & MASK_06) + { + printk(KERN_INFO "budget-av: cam inserted\n"); budget_av->slot_status = 1; + } + saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); } else if (!open) { saa7146_setgpio(budget_av->budget.dev, 1, SAA7146_GPIO_OUTLO); if (ttpci_budget_debiread(&budget_av->budget, DEBICICAM, 0, 1, 0, 1) == -ETIMEDOUT) + { + printk(KERN_INFO "budget-av: cam ejected\n"); + saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTHI); /* disable card */ + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); /* Vcc off */ budget_av->slot_status = 0; + } } if (budget_av->slot_status == 1) @@ -272,17 +294,11 @@ static int ciintf_init(struct budget_av *budget_av) memset(&budget_av->ca, 0, sizeof(struct dvb_ca_en50221)); - /* setup GPIOs */ - saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI); + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); + saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO); saa7146_setgpio(saa, 2, SAA7146_GPIO_OUTLO); saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO); - /* Reset the card */ - saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); - msleep(50); - saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO); - msleep(100); - /* Enable DEBI pins */ saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800); @@ -297,13 +313,14 @@ static int ciintf_init(struct budget_av *budget_av) budget_av->ca.slot_ts_enable = ciintf_slot_ts_enable; budget_av->ca.poll_slot_status = ciintf_poll_slot_status; budget_av->ca.data = budget_av; - if ((result = dvb_ca_en50221_init(budget_av->budget.dvb_adapter, + + if ((result = dvb_ca_en50221_init(&budget_av->budget.dvb_adapter, &budget_av->ca, 0, 1)) != 0) { - printk("budget_av: CI interface detected, but initialisation failed.\n"); + printk(KERN_ERR "budget-av: ci initialisation failed.\n"); goto error; } - // success! - printk("ciintf_init: CI interface initialised\n"); + + printk(KERN_INFO "budget-av: ci interface initialised.\n"); budget_av->budget.ci_present = 1; return 0; @@ -361,8 +378,12 @@ static const u8 saa7113_tab[] = { static int saa7113_init(struct budget_av *budget_av) { struct budget *budget = &budget_av->budget; + struct saa7146_dev *saa = budget->dev; const u8 *data = saa7113_tab; + saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTHI); + msleep(200); + if (i2c_writereg(&budget->i2c_adap, 0x4a, 0x01, 0x08) != 1) { dprintk(1, "saa7113 not found on KNC card\n"); return -ENODEV; @@ -697,75 +718,90 @@ static u8 read_pwm(struct budget_av *budget_av) return pwm; } +#define SUBID_DVBS_KNC1 0x0010 +#define SUBID_DVBS_KNC1_PLUS 0x0011 +#define SUBID_DVBS_TYPHOON 0x4f56 +#define SUBID_DVBS_CINERGY1200 0x1154 + +#define SUBID_DVBC_KNC1 0x0020 +#define SUBID_DVBC_KNC1_PLUS 0x0021 +#define SUBID_DVBC_CINERGY1200 0x1156 + +#define SUBID_DVBT_KNC1_PLUS 0x0031 +#define SUBID_DVBT_KNC1 0x0030 +#define SUBID_DVBT_CINERGY1200 0x1157 static void frontend_init(struct budget_av *budget_av) { - switch (budget_av->budget.dev->pci->subsystem_device) { - case 0x4f56: // Typhoon/KNC1 DVB-S budget (stv0299/Philips SU1278(tsa5059)) - budget_av->budget.dvb_frontend = - stv0299_attach(&typhoon_config, &budget_av->budget.i2c_adap); - if (budget_av->budget.dvb_frontend != NULL) { + struct saa7146_dev * saa = budget_av->budget.dev; + struct dvb_frontend * fe = NULL; + + switch (saa->pci->subsystem_device) { + case SUBID_DVBS_KNC1_PLUS: + case SUBID_DVBC_KNC1_PLUS: + case SUBID_DVBT_KNC1_PLUS: + // Enable / PowerON Frontend + saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI); break; - } + } + + switch (saa->pci->subsystem_device) { + + case SUBID_DVBS_KNC1: + case SUBID_DVBS_KNC1_PLUS: + case SUBID_DVBS_TYPHOON: + fe = stv0299_attach(&typhoon_config, + &budget_av->budget.i2c_adap); break; - case 0x0020: // KNC1 DVB-C budget (tda10021/Philips CU1216(tua6034)) - budget_av->budget.dvb_frontend = - tda10021_attach(&philips_cu1216_config, - &budget_av->budget.i2c_adap, read_pwm(budget_av)); - if (budget_av->budget.dvb_frontend != NULL) { - break; - } + case SUBID_DVBS_CINERGY1200: + fe = stv0299_attach(&cinergy_1200s_config, + &budget_av->budget.i2c_adap); break; - case 0x0030: // KNC1 DVB-T budget (tda10046/Philips TU1216(tda6651tt)) - budget_av->budget.dvb_frontend = - tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap); - if (budget_av->budget.dvb_frontend != NULL) { - break; - } + case SUBID_DVBC_KNC1: + case SUBID_DVBC_KNC1_PLUS: + fe = tda10021_attach(&philips_cu1216_config, + &budget_av->budget.i2c_adap, + read_pwm(budget_av)); break; - case 0x1154: // TerraTec Cinergy 1200 DVB-S (stv0299/Philips SU1278(tsa5059)) - budget_av->budget.dvb_frontend = - stv0299_attach(&cinergy_1200s_config, &budget_av->budget.i2c_adap); - if (budget_av->budget.dvb_frontend != NULL) { - break; - } + case SUBID_DVBT_KNC1: + case SUBID_DVBT_KNC1_PLUS: + fe = tda10046_attach(&philips_tu1216_config, + &budget_av->budget.i2c_adap); break; - case 0x1156: // Terratec Cinergy 1200 DVB-C (tda10021/Philips CU1216(tua6034)) - budget_av->budget.dvb_frontend = - tda10021_attach(&philips_cu1216_config, - &budget_av->budget.i2c_adap, read_pwm(budget_av)); - if (budget_av->budget.dvb_frontend) { - break; - } + case SUBID_DVBC_CINERGY1200: + fe = tda10021_attach(&philips_cu1216_config, + &budget_av->budget.i2c_adap, + read_pwm(budget_av)); break; - case 0x1157: // Terratec Cinergy 1200 DVB-T (tda10046/Philips TU1216(tda6651tt)) - budget_av->budget.dvb_frontend = - tda10046_attach(&philips_tu1216_config, &budget_av->budget.i2c_adap); - if (budget_av->budget.dvb_frontend) { - break; - } + case SUBID_DVBT_CINERGY1200: + fe = tda10046_attach(&philips_tu1216_config, + &budget_av->budget.i2c_adap); break; } - if (budget_av->budget.dvb_frontend == NULL) { - printk("budget_av: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n", - budget_av->budget.dev->pci->vendor, - budget_av->budget.dev->pci->device, - budget_av->budget.dev->pci->subsystem_vendor, - budget_av->budget.dev->pci->subsystem_device); - } else { - if (dvb_register_frontend - (budget_av->budget.dvb_adapter, budget_av->budget.dvb_frontend)) { - printk("budget-av: Frontend registration failed!\n"); - if (budget_av->budget.dvb_frontend->ops->release) - budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend); - budget_av->budget.dvb_frontend = NULL; - } + if (fe == NULL) { + printk(KERN_ERR "budget-av: A frontend driver was not found " + "for device %04x/%04x subsystem %04x/%04x\n", + saa->pci->vendor, + saa->pci->device, + saa->pci->subsystem_vendor, + saa->pci->subsystem_device); + return; + } + + budget_av->budget.dvb_frontend = fe; + + if (dvb_register_frontend(&budget_av->budget.dvb_adapter, + budget_av->budget.dvb_frontend)) { + printk(KERN_ERR "budget-av: Frontend registration failed!\n"); + if (budget_av->budget.dvb_frontend->ops->release) + budget_av->budget.dvb_frontend->ops->release(budget_av->budget.dvb_frontend); + budget_av->budget.dvb_frontend = NULL; } } @@ -822,6 +858,7 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio memset(budget_av, 0, sizeof(struct budget_av)); + budget_av->has_saa7113 = 0; budget_av->budget.ci_present = 0; dev->ext_priv = budget_av; @@ -836,10 +873,7 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio saa7146_write(dev, DD1_INIT, 0x07000600); saa7146_write(dev, MC2, MASK_09 | MASK_25 | MASK_10 | MASK_26); - saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTHI); - msleep(500); - - if (0 == saa7113_init(budget_av)) { + if (saa7113_init(budget_av) == 0) { budget_av->has_saa7113 = 1; if (0 != saa7146_vv_init(dev, &vv_data)) { @@ -860,31 +894,26 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio saa7113_setinput(budget_av, 0); } else { - budget_av->has_saa7113 = 0; - - saa7146_setgpio(dev, 0, SAA7146_GPIO_OUTLO); + ciintf_init(budget_av); } /* fixme: find some sane values here... */ saa7146_write(dev, PCI_BT_V1, 0x1c00101f); - mac = budget_av->budget.dvb_adapter->proposed_mac; + mac = budget_av->budget.dvb_adapter.proposed_mac; if (i2c_readregs(&budget_av->budget.i2c_adap, 0xa0, 0x30, mac, 6)) { - printk("KNC1-%d: Could not read MAC from KNC1 card\n", - budget_av->budget.dvb_adapter->num); + printk(KERN_ERR "KNC1-%d: Could not read MAC from KNC1 card\n", + budget_av->budget.dvb_adapter.num); memset(mac, 0, 6); } else { - printk("KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", - budget_av->budget.dvb_adapter->num, + printk(KERN_INFO "KNC1-%d: MAC addr = %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n", + budget_av->budget.dvb_adapter.num, mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); } - budget_av->budget.dvb_adapter->priv = budget_av; + budget_av->budget.dvb_adapter.priv = budget_av; frontend_init(budget_av); - if (enable_ci) - ciintf_init(budget_av); - return 0; } @@ -963,14 +992,21 @@ static struct saa7146_extension budget_extension; MAKE_BUDGET_INFO(knc1s, "KNC1 DVB-S", BUDGET_KNC1S); MAKE_BUDGET_INFO(knc1c, "KNC1 DVB-C", BUDGET_KNC1C); MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T); +MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP); +MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP); +MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP); MAKE_BUDGET_INFO(cin1200s, "TerraTec Cinergy 1200 DVB-S", BUDGET_CIN1200S); MAKE_BUDGET_INFO(cin1200c, "Terratec Cinergy 1200 DVB-C", BUDGET_CIN1200C); MAKE_BUDGET_INFO(cin1200t, "Terratec Cinergy 1200 DVB-T", BUDGET_CIN1200T); static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x4f56), + MAKE_EXTENSION_PCI(knc1s, 0x1131, 0x0010), + MAKE_EXTENSION_PCI(knc1sp, 0x1131, 0x0011), MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020), + MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021), MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030), + MAKE_EXTENSION_PCI(knc1tp, 0x1894, 0x0031), MAKE_EXTENSION_PCI(cin1200s, 0x153b, 0x1154), MAKE_EXTENSION_PCI(cin1200c, 0x153b, 0x1156), MAKE_EXTENSION_PCI(cin1200t, 0x153b, 0x1157), @@ -1010,5 +1046,3 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others"); MODULE_DESCRIPTION("driver for the SAA7146 based so-called " "budget PCI DVB w/ analog input and CI-module (e.g. the KNC cards)"); -module_param_named(enable_ci, enable_ci, int, 0644); -MODULE_PARM_DESC(enable_ci, "Turn on/off CI module (default:off)."); diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c index 521111be355..dce11611137 100644 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -395,7 +395,7 @@ static int ciintf_init(struct budget_ci *budget_ci) budget_ci->ca.slot_shutdown = ciintf_slot_shutdown; budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable; budget_ci->ca.data = budget_ci; - if ((result = dvb_ca_en50221_init(budget_ci->budget.dvb_adapter, + if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter, &budget_ci->ca, DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE | DVB_CA_EN50221_FLAG_IRQ_FR | @@ -881,7 +881,7 @@ static void frontend_init(struct budget_ci *budget_ci) budget_ci->budget.dev->pci->subsystem_device); } else { if (dvb_register_frontend - (budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) { + (&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) { printk("budget-ci: Frontend registration failed!\n"); if (budget_ci->budget.dvb_frontend->ops->release) budget_ci->budget.dvb_frontend->ops->release(budget_ci->budget.dvb_frontend); @@ -916,7 +916,7 @@ static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio ciintf_init(budget_ci); - budget_ci->budget.dvb_adapter->priv = budget_ci; + budget_ci->budget.dvb_adapter.priv = budget_ci; frontend_init(budget_ci); return 0; diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c index 93a9b40917e..0498a055a4c 100644 --- a/drivers/media/dvb/ttpci/budget-core.c +++ b/drivers/media/dvb/ttpci/budget-core.c @@ -298,7 +298,7 @@ static int budget_register(struct budget *budget) budget->dmxdev.demux = &dvbdemux->dmx; budget->dmxdev.capabilities = 0; - dvb_dmxdev_init(&budget->dmxdev, budget->dvb_adapter); + dvb_dmxdev_init(&budget->dmxdev, &budget->dvb_adapter); budget->hw_frontend.source = DMX_FRONTEND_0; @@ -316,7 +316,7 @@ static int budget_register(struct budget *budget) if (ret < 0) return ret; - dvb_net_init(budget->dvb_adapter, &budget->dvb_net, &dvbdemux->dmx); + dvb_net_init(&budget->dvb_adapter, &budget->dvb_net, &dvbdemux->dmx); return 0; } @@ -385,11 +385,11 @@ int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev, strcpy(budget->i2c_adap.name, budget->card->name); if (i2c_add_adapter(&budget->i2c_adap) < 0) { - dvb_unregister_adapter(budget->dvb_adapter); + dvb_unregister_adapter(&budget->dvb_adapter); return -ENOMEM; } - ttpci_eeprom_parse_mac(&budget->i2c_adap, budget->dvb_adapter->proposed_mac); + ttpci_eeprom_parse_mac(&budget->i2c_adap, budget->dvb_adapter.proposed_mac); if (NULL == (budget->grabbing = saa7146_vmalloc_build_pgtable(dev->pci, length, &budget->pt))) { @@ -417,7 +417,7 @@ err: vfree(budget->grabbing); - dvb_unregister_adapter(budget->dvb_adapter); + dvb_unregister_adapter(&budget->dvb_adapter); return ret; } @@ -432,7 +432,7 @@ int ttpci_budget_deinit(struct budget *budget) i2c_del_adapter(&budget->i2c_adap); - dvb_unregister_adapter(budget->dvb_adapter); + dvb_unregister_adapter(&budget->dvb_adapter); tasklet_kill(&budget->vpe_tasklet); diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index 5d524a4f213..8142e26b47f 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -453,7 +453,7 @@ static void frontend_init(struct budget_patch* budget) budget->dev->pci->subsystem_vendor, budget->dev->pci->subsystem_device); } else { - if (dvb_register_frontend(budget->dvb_adapter, budget->dvb_frontend)) { + if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) { printk("budget-av: Frontend registration failed!\n"); if (budget->dvb_frontend->ops->release) budget->dvb_frontend->ops->release(budget->dvb_frontend); @@ -702,7 +702,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte dev->ext_priv = budget; - budget->dvb_adapter->priv = budget; + budget->dvb_adapter.priv = budget; frontend_init(budget); return 0; diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 5e6a10f4ad9..083fd44e5f9 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -468,7 +468,7 @@ static void frontend_init(struct budget *budget) budget->dev->pci->subsystem_vendor, budget->dev->pci->subsystem_device); } else { - if (dvb_register_frontend(budget->dvb_adapter, budget->dvb_frontend)) { + if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) { printk("budget: Frontend registration failed!\n"); if (budget->dvb_frontend->ops->release) budget->dvb_frontend->ops->release(budget->dvb_frontend); @@ -497,7 +497,7 @@ static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_ return err; } - budget->dvb_adapter->priv = budget; + budget->dvb_adapter.priv = budget; frontend_init(budget); return 0; diff --git a/drivers/media/dvb/ttpci/budget.h b/drivers/media/dvb/ttpci/budget.h index 10bd41f0363..c6ef496ba70 100644 --- a/drivers/media/dvb/ttpci/budget.h +++ b/drivers/media/dvb/ttpci/budget.h @@ -64,7 +64,7 @@ struct budget { spinlock_t debilock; - struct dvb_adapter *dvb_adapter; + struct dvb_adapter dvb_adapter; struct dvb_frontend *dvb_frontend; void *priv; }; @@ -92,6 +92,9 @@ static struct saa7146_pci_extension_data x_var = { \ #define BUDGET_KNC1S 8 #define BUDGET_KNC1C 9 #define BUDGET_KNC1T 10 +#define BUDGET_KNC1SP 11 +#define BUDGET_KNC1CP 12 +#define BUDGET_KNC1TP 13 #define BUDGET_VIDEO_PORTA 0 #define BUDGET_VIDEO_PORTB 1 diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index 4c046ece883..afa0e7a0e50 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -84,7 +84,7 @@ struct ttusb { struct semaphore semi2c; struct semaphore semusb; - struct dvb_adapter *adapter; + struct dvb_adapter adapter; struct usb_device *dev; struct i2c_adapter i2c_adap; @@ -1065,7 +1065,7 @@ static int alps_tdmb7_pll_set(struct dvb_frontend* fe, struct dvb_frontend_param return 0; } -struct cx22700_config alps_tdmb7_config = { +static struct cx22700_config alps_tdmb7_config = { .demod_address = 0x43, .pll_set = alps_tdmb7_pll_set, }; @@ -1412,7 +1412,7 @@ static void frontend_init(struct ttusb* ttusb) le16_to_cpu(ttusb->dev->descriptor.idVendor), le16_to_cpu(ttusb->dev->descriptor.idProduct)); } else { - if (dvb_register_frontend(ttusb->adapter, ttusb->fe)) { + if (dvb_register_frontend(&ttusb->adapter, ttusb->fe)) { printk("dvb-ttusb-budget: Frontend registration failed!\n"); if (ttusb->fe->ops->release) ttusb->fe->ops->release(ttusb->fe); @@ -1462,7 +1462,7 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i up(&ttusb->semi2c); dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE); - ttusb->adapter->priv = ttusb; + ttusb->adapter.priv = ttusb; /* i2c */ memset(&ttusb->i2c_adap, 0, sizeof(struct i2c_adapter)); @@ -1481,7 +1481,7 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i result = i2c_add_adapter(&ttusb->i2c_adap); if (result) { - dvb_unregister_adapter (ttusb->adapter); + dvb_unregister_adapter (&ttusb->adapter); return result; } @@ -1503,7 +1503,7 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i if ((result = dvb_dmx_init(&ttusb->dvb_demux)) < 0) { printk("ttusb_dvb: dvb_dmx_init failed (errno = %d)\n", result); i2c_del_adapter(&ttusb->i2c_adap); - dvb_unregister_adapter (ttusb->adapter); + dvb_unregister_adapter (&ttusb->adapter); return -ENODEV; } //FIXME dmxdev (nur WAS?) @@ -1511,21 +1511,21 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i ttusb->dmxdev.demux = &ttusb->dvb_demux.dmx; ttusb->dmxdev.capabilities = 0; - if ((result = dvb_dmxdev_init(&ttusb->dmxdev, ttusb->adapter)) < 0) { + if ((result = dvb_dmxdev_init(&ttusb->dmxdev, &ttusb->adapter)) < 0) { printk("ttusb_dvb: dvb_dmxdev_init failed (errno = %d)\n", result); dvb_dmx_release(&ttusb->dvb_demux); i2c_del_adapter(&ttusb->i2c_adap); - dvb_unregister_adapter (ttusb->adapter); + dvb_unregister_adapter (&ttusb->adapter); return -ENODEV; } - if (dvb_net_init(ttusb->adapter, &ttusb->dvbnet, &ttusb->dvb_demux.dmx)) { + if (dvb_net_init(&ttusb->adapter, &ttusb->dvbnet, &ttusb->dvb_demux.dmx)) { printk("ttusb_dvb: dvb_net_init failed!\n"); dvb_dmxdev_release(&ttusb->dmxdev); dvb_dmx_release(&ttusb->dvb_demux); i2c_del_adapter(&ttusb->i2c_adap); - dvb_unregister_adapter (ttusb->adapter); + dvb_unregister_adapter (&ttusb->adapter); return -ENODEV; } @@ -1559,7 +1559,7 @@ static void ttusb_disconnect(struct usb_interface *intf) dvb_dmx_release(&ttusb->dvb_demux); if (ttusb->fe != NULL) dvb_unregister_frontend(ttusb->fe); i2c_del_adapter(&ttusb->i2c_adap); - dvb_unregister_adapter(ttusb->adapter); + dvb_unregister_adapter(&ttusb->adapter); ttusb_free_iso_urbs(ttusb); diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index 64e771bd890..505bdaff5a7 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -98,7 +98,7 @@ struct ttusb_dec { int can_playback; /* DVB bits */ - struct dvb_adapter *adapter; + struct dvb_adapter adapter; struct dmxdev dmxdev; struct dvb_demux demux; struct dmx_frontend frontend; @@ -1435,7 +1435,7 @@ static int ttusb_dec_init_dvb(struct ttusb_dec *dec) printk("%s: dvb_dmx_init failed: error %d\n", __FUNCTION__, result); - dvb_unregister_adapter(dec->adapter); + dvb_unregister_adapter(&dec->adapter); return result; } @@ -1444,12 +1444,12 @@ static int ttusb_dec_init_dvb(struct ttusb_dec *dec) dec->dmxdev.demux = &dec->demux.dmx; dec->dmxdev.capabilities = 0; - if ((result = dvb_dmxdev_init(&dec->dmxdev, dec->adapter)) < 0) { + if ((result = dvb_dmxdev_init(&dec->dmxdev, &dec->adapter)) < 0) { printk("%s: dvb_dmxdev_init failed: error %d\n", __FUNCTION__, result); dvb_dmx_release(&dec->demux); - dvb_unregister_adapter(dec->adapter); + dvb_unregister_adapter(&dec->adapter); return result; } @@ -1463,7 +1463,7 @@ static int ttusb_dec_init_dvb(struct ttusb_dec *dec) dvb_dmxdev_release(&dec->dmxdev); dvb_dmx_release(&dec->demux); - dvb_unregister_adapter(dec->adapter); + dvb_unregister_adapter(&dec->adapter); return result; } @@ -1476,12 +1476,12 @@ static int ttusb_dec_init_dvb(struct ttusb_dec *dec) dec->demux.dmx.remove_frontend(&dec->demux.dmx, &dec->frontend); dvb_dmxdev_release(&dec->dmxdev); dvb_dmx_release(&dec->demux); - dvb_unregister_adapter(dec->adapter); + dvb_unregister_adapter(&dec->adapter); return result; } - dvb_net_init(dec->adapter, &dec->dvb_net, &dec->demux.dmx); + dvb_net_init(&dec->adapter, &dec->dvb_net, &dec->demux.dmx); return 0; } @@ -1496,7 +1496,7 @@ static void ttusb_dec_exit_dvb(struct ttusb_dec *dec) dvb_dmxdev_release(&dec->dmxdev); dvb_dmx_release(&dec->demux); if (dec->fe) dvb_unregister_frontend(dec->fe); - dvb_unregister_adapter(dec->adapter); + dvb_unregister_adapter(&dec->adapter); } static void ttusb_dec_exit_rc(struct ttusb_dec *dec) @@ -1565,15 +1565,15 @@ static void ttusb_dec_exit_filters(struct ttusb_dec *dec) } } -int fe_send_command(struct dvb_frontend* fe, const u8 command, - int param_length, const u8 params[], - int *result_length, u8 cmd_result[]) +static int fe_send_command(struct dvb_frontend* fe, const u8 command, + int param_length, const u8 params[], + int *result_length, u8 cmd_result[]) { struct ttusb_dec* dec = (struct ttusb_dec*) fe->dvb->priv; return ttusb_dec_send_command(dec, command, param_length, params, result_length, cmd_result); } -struct ttusbdecfe_config fe_config = { +static struct ttusbdecfe_config fe_config = { .send_command = fe_send_command }; @@ -1620,7 +1620,7 @@ static int ttusb_dec_probe(struct usb_interface *intf, } ttusb_dec_init_dvb(dec); - dec->adapter->priv = dec; + dec->adapter.priv = dec; switch (le16_to_cpu(id->idProduct)) { case 0x1006: dec->fe = ttusbdecfe_dvbs_attach(&fe_config); @@ -1637,7 +1637,7 @@ static int ttusb_dec_probe(struct usb_interface *intf, le16_to_cpu(dec->udev->descriptor.idVendor), le16_to_cpu(dec->udev->descriptor.idProduct)); } else { - if (dvb_register_frontend(dec->adapter, dec->fe)) { + if (dvb_register_frontend(&dec->adapter, dec->fe)) { printk("budget-ci: Frontend registration failed!\n"); if (dec->fe->ops->release) dec->fe->ops->release(dec->fe); diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index d3dd4228b72..6c05fddb69a 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -240,6 +240,7 @@ config VIDEO_SAA7134 select VIDEO_BUF select VIDEO_IR select VIDEO_TUNER + select CRC32 ---help--- This is a video4linux driver for Philips SAA7130/7134 based TV cards. diff --git a/drivers/media/video/bttv-cards.c b/drivers/media/video/bttv-cards.c index 85224b90e39..6334122704a 100644 --- a/drivers/media/video/bttv-cards.c +++ b/drivers/media/video/bttv-cards.c @@ -1946,7 +1946,6 @@ struct tvcard bttv_tvcards[] = { .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = TUNER_ABSENT, - .no_video = 1, .pll = PLL_28, },{ .name = "Teppro TEV-560/InterVision IV-560", diff --git a/drivers/media/video/bttv-i2c.c b/drivers/media/video/bttv-i2c.c index e3f477dff82..c2368bc832e 100644 --- a/drivers/media/video/bttv-i2c.c +++ b/drivers/media/video/bttv-i2c.c @@ -363,6 +363,9 @@ int bttv_I2CWrite(struct bttv *btv, unsigned char addr, unsigned char b1, /* read EEPROM content */ void __devinit bttv_readee(struct bttv *btv, unsigned char *eedata, int addr) { + memset(eedata, 0, 256); + if (0 != btv->i2c_rc) + return; btv->i2c_client.addr = addr >> 1; tveeprom_read(&btv->i2c_client, eedata, 256); } diff --git a/drivers/media/video/saa7134/saa6752hs.c b/drivers/media/video/saa7134/saa6752hs.c index fe6abe34168..1db02268298 100644 --- a/drivers/media/video/saa7134/saa6752hs.c +++ b/drivers/media/video/saa7134/saa6752hs.c @@ -43,15 +43,15 @@ enum saa6752hs_videoformat { static const struct v4l2_format v4l2_format_table[] = { [SAA6752HS_VF_D1] = { - .fmt.pix.width = 720, .fmt.pix.height = 576 }, + .fmt = { .pix = { .width = 720, .height = 576 }, }, }, [SAA6752HS_VF_2_3_D1] = { - .fmt.pix.width = 480, .fmt.pix.height = 576 }, + .fmt = { .pix = { .width = 480, .height = 576 }, }, }, [SAA6752HS_VF_1_2_D1] = { - .fmt.pix.width = 352, .fmt.pix.height = 576 }, + .fmt = { .pix = { .width = 352, .height = 576 }, }, }, [SAA6752HS_VF_SIF] = { - .fmt.pix.width = 352, .fmt.pix.height = 288 }, + .fmt = { .pix = { .width = 352, .height = 288 }, }, }, [SAA6752HS_VF_UNKNOWN] = { - .fmt.pix.width = 0, .fmt.pix.height = 0}, + .fmt = { .pix = { .width = 0, .height = 0 }, }, }, }; struct saa6752hs_state { diff --git a/drivers/media/video/video-buf-dvb.c b/drivers/media/video/video-buf-dvb.c index 31cc4ed9b74..5f870075b55 100644 --- a/drivers/media/video/video-buf-dvb.c +++ b/drivers/media/video/video-buf-dvb.c @@ -149,10 +149,10 @@ int videobuf_dvb_register(struct videobuf_dvb *dvb, dvb->name, result); goto fail_adapter; } - dvb->adapter->priv = adapter_priv; + dvb->adapter.priv = adapter_priv; /* register frontend */ - result = dvb_register_frontend(dvb->adapter, dvb->frontend); + result = dvb_register_frontend(&dvb->adapter, dvb->frontend); if (result < 0) { printk(KERN_WARNING "%s: dvb_register_frontend failed (errno = %d)\n", dvb->name, result); @@ -178,7 +178,7 @@ int videobuf_dvb_register(struct videobuf_dvb *dvb, dvb->dmxdev.filternum = 256; dvb->dmxdev.demux = &dvb->demux.dmx; dvb->dmxdev.capabilities = 0; - result = dvb_dmxdev_init(&dvb->dmxdev, dvb->adapter); + result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); if (result < 0) { printk(KERN_WARNING "%s: dvb_dmxdev_init failed (errno = %d)\n", dvb->name, result); @@ -209,7 +209,7 @@ int videobuf_dvb_register(struct videobuf_dvb *dvb, } /* register network adapter */ - dvb_net_init(dvb->adapter, &dvb->net, &dvb->demux.dmx); + dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx); return 0; fail_fe_conn: @@ -223,7 +223,7 @@ fail_dmxdev: fail_dmx: dvb_unregister_frontend(dvb->frontend); fail_frontend: - dvb_unregister_adapter(dvb->adapter); + dvb_unregister_adapter(&dvb->adapter); fail_adapter: return result; } @@ -236,7 +236,7 @@ void videobuf_dvb_unregister(struct videobuf_dvb *dvb) dvb_dmxdev_release(&dvb->dmxdev); dvb_dmx_release(&dvb->demux); dvb_unregister_frontend(dvb->frontend); - dvb_unregister_adapter(dvb->adapter); + dvb_unregister_adapter(&dvb->adapter); } EXPORT_SYMBOL(videobuf_dvb_register); diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 2e70d74fbde..4991bbd054f 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -51,7 +51,7 @@ config MMC_PXA config MMC_WBSD tristate "Winbond W83L51xD SD/MMC Card Interface support" - depends on MMC && ISA && ISA_DMA_API + depends on MMC && ISA_DMA_API help This selects the Winbond(R) W83L51xD Secure digital and Multimedia card Interface. diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c index b5b4a7b1190..d4eee99c2bf 100644 --- a/drivers/mmc/mmc_block.c +++ b/drivers/mmc/mmc_block.c @@ -383,7 +383,10 @@ static int mmc_blk_probe(struct mmc_card *card) struct mmc_blk_data *md; int err; - if (card->csd.cmdclass & ~0x1ff) + /* + * Check that the card supports the command class(es) we need. + */ + if (!(card->csd.cmdclass & CCC_BLOCK_READ)) return -ENODEV; if (card->csd.read_blkbits < 9) { diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c index 39747526c71..b7fbd30b49a 100644 --- a/drivers/mmc/wbsd.c +++ b/drivers/mmc/wbsd.c @@ -28,7 +28,9 @@ #include <linux/ioport.h> #include <linux/device.h> #include <linux/interrupt.h> +#include <linux/dma-mapping.h> #include <linux/delay.h> +#include <linux/pnp.h> #include <linux/highmem.h> #include <linux/mmc/host.h> #include <linux/mmc/protocol.h> @@ -40,7 +42,7 @@ #include "wbsd.h" #define DRIVER_NAME "wbsd" -#define DRIVER_VERSION "1.1" +#define DRIVER_VERSION "1.2" #ifdef CONFIG_MMC_DEBUG #define DBG(x...) \ @@ -52,10 +54,6 @@ #define DBGF(x...) do { } while (0) #endif -static unsigned int io = 0x248; -static unsigned int irq = 6; -static int dma = 2; - #ifdef CONFIG_MMC_DEBUG void DBG_REG(int reg, u8 value) { @@ -79,28 +77,61 @@ void DBG_REG(int reg, u8 value) #endif /* + * Device resources + */ + +#ifdef CONFIG_PNP + +static const struct pnp_device_id pnp_dev_table[] = { + { "WEC0517", 0 }, + { "WEC0518", 0 }, + { "", 0 }, +}; + +MODULE_DEVICE_TABLE(pnp, pnp_dev_table); + +#endif /* CONFIG_PNP */ + +#ifdef CONFIG_PNP +static unsigned int nopnp = 0; +#else +static const unsigned int nopnp = 1; +#endif +static unsigned int io = 0x248; +static unsigned int irq = 6; +static int dma = 2; + +/* * Basic functions */ static inline void wbsd_unlock_config(struct wbsd_host* host) { + BUG_ON(host->config == 0); + outb(host->unlock_code, host->config); outb(host->unlock_code, host->config); } static inline void wbsd_lock_config(struct wbsd_host* host) { + BUG_ON(host->config == 0); + outb(LOCK_CODE, host->config); } static inline void wbsd_write_config(struct wbsd_host* host, u8 reg, u8 value) { + BUG_ON(host->config == 0); + outb(reg, host->config); outb(value, host->config + 1); } static inline u8 wbsd_read_config(struct wbsd_host* host, u8 reg) { + BUG_ON(host->config == 0); + outb(reg, host->config); return inb(host->config + 1); } @@ -133,6 +164,13 @@ static void wbsd_init_device(struct wbsd_host* host) wbsd_write_index(host, WBSD_IDX_SETUP, setup); /* + * Set DAT3 to input + */ + setup &= ~WBSD_DAT3_H; + wbsd_write_index(host, WBSD_IDX_SETUP, setup); + host->flags &= ~WBSD_FIGNORE_DETECT; + + /* * Read back default clock. */ host->clk = wbsd_read_index(host, WBSD_IDX_CLK); @@ -148,6 +186,14 @@ static void wbsd_init_device(struct wbsd_host* host) wbsd_write_index(host, WBSD_IDX_TAAC, 0x7F); /* + * Test for card presence + */ + if (inb(host->base + WBSD_CSR) & WBSD_CARDPRESENT) + host->flags |= WBSD_FCARD_PRESENT; + else + host->flags &= ~WBSD_FCARD_PRESENT; + + /* * Enable interesting interrupts. */ ier = 0; @@ -407,8 +453,6 @@ static inline void wbsd_get_long_reply(struct wbsd_host* host, } } -static irqreturn_t wbsd_irq(int irq, void *dev_id, struct pt_regs *regs); - static void wbsd_send_command(struct wbsd_host* host, struct mmc_command* cmd) { int i; @@ -646,6 +690,13 @@ static void wbsd_fill_fifo(struct wbsd_host* host) } wbsd_kunmap_sg(host); + + /* + * The controller stops sending interrupts for + * 'FIFO empty' under certain conditions. So we + * need to be a bit more pro-active. + */ + tasklet_schedule(&host->fifo_tasklet); } static void wbsd_prepare_data(struct wbsd_host* host, struct mmc_data* data) @@ -850,9 +901,11 @@ static void wbsd_finish_data(struct wbsd_host* host, struct mmc_data* data) wbsd_request_end(host, host->mrq); } -/* - * MMC Callbacks - */ +/*****************************************************************************\ + * * + * MMC layer callbacks * + * * +\*****************************************************************************/ static void wbsd_request(struct mmc_host* mmc, struct mmc_request* mrq) { @@ -874,7 +927,7 @@ static void wbsd_request(struct mmc_host* mmc, struct mmc_request* mrq) * If there is no card in the slot then * timeout immediatly. */ - if (!(inb(host->base + WBSD_CSR) & WBSD_CARDPRESENT)) + if (!(host->flags & WBSD_FCARD_PRESENT)) { cmd->error = MMC_ERR_TIMEOUT; goto done; @@ -953,33 +1006,50 @@ static void wbsd_set_ios(struct mmc_host* mmc, struct mmc_ios* ios) host->clk = clk; } + /* + * Power up card. + */ if (ios->power_mode != MMC_POWER_OFF) { - /* - * Power up card. - */ pwr = inb(host->base + WBSD_CSR); pwr &= ~WBSD_POWER_N; outb(pwr, host->base + WBSD_CSR); - - /* - * This behaviour is stolen from the - * Windows driver. Don't know why, but - * it is needed. - */ - setup = wbsd_read_index(host, WBSD_IDX_SETUP); - if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) - setup |= WBSD_DAT3_H; - else - setup &= ~WBSD_DAT3_H; - wbsd_write_index(host, WBSD_IDX_SETUP, setup); - - mdelay(1); } + /* + * MMC cards need to have pin 1 high during init. + * Init time corresponds rather nicely with the bus mode. + * It wreaks havoc with the card detection though so + * that needs to be disabed. + */ + setup = wbsd_read_index(host, WBSD_IDX_SETUP); + if ((ios->power_mode == MMC_POWER_ON) && + (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)) + { + setup |= WBSD_DAT3_H; + host->flags |= WBSD_FIGNORE_DETECT; + } + else + { + setup &= ~WBSD_DAT3_H; + host->flags &= ~WBSD_FIGNORE_DETECT; + } + wbsd_write_index(host, WBSD_IDX_SETUP, setup); + spin_unlock_bh(&host->lock); } +static struct mmc_host_ops wbsd_ops = { + .request = wbsd_request, + .set_ios = wbsd_set_ios, +}; + +/*****************************************************************************\ + * * + * Interrupt handling * + * * +\*****************************************************************************/ + /* * Tasklets */ @@ -1005,17 +1075,33 @@ static void wbsd_tasklet_card(unsigned long param) { struct wbsd_host* host = (struct wbsd_host*)param; u8 csr; + int change = 0; spin_lock(&host->lock); + if (host->flags & WBSD_FIGNORE_DETECT) + { + spin_unlock(&host->lock); + return; + } + csr = inb(host->base + WBSD_CSR); WARN_ON(csr == 0xff); if (csr & WBSD_CARDPRESENT) - DBG("Card inserted\n"); - else + { + if (!(host->flags & WBSD_FCARD_PRESENT)) + { + DBG("Card inserted\n"); + host->flags |= WBSD_FCARD_PRESENT; + change = 1; + } + } + else if (host->flags & WBSD_FCARD_PRESENT) { DBG("Card removed\n"); + host->flags &= ~WBSD_FCARD_PRESENT; + change = 1; if (host->mrq) { @@ -1033,7 +1119,8 @@ static void wbsd_tasklet_card(unsigned long param) */ spin_unlock(&host->lock); - mmc_detect_change(host->mmc); + if (change) + mmc_detect_change(host->mmc); } static void wbsd_tasklet_fifo(unsigned long param) @@ -1200,11 +1287,85 @@ static irqreturn_t wbsd_irq(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } +/*****************************************************************************\ + * * + * Device initialisation and shutdown * + * * +\*****************************************************************************/ + /* - * Support functions for probe + * Allocate/free MMC structure. */ -static int wbsd_scan(struct wbsd_host* host) +static int __devinit wbsd_alloc_mmc(struct device* dev) +{ + struct mmc_host* mmc; + struct wbsd_host* host; + + /* + * Allocate MMC structure. + */ + mmc = mmc_alloc_host(sizeof(struct wbsd_host), dev); + if (!mmc) + return -ENOMEM; + + host = mmc_priv(mmc); + host->mmc = mmc; + + host->dma = -1; + + /* + * Set host parameters. + */ + mmc->ops = &wbsd_ops; + mmc->f_min = 375000; + mmc->f_max = 24000000; + mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34; + + spin_lock_init(&host->lock); + + /* + * Maximum number of segments. Worst case is one sector per segment + * so this will be 64kB/512. + */ + mmc->max_hw_segs = 128; + mmc->max_phys_segs = 128; + + /* + * Maximum number of sectors in one transfer. Also limited by 64kB + * buffer. + */ + mmc->max_sectors = 128; + + /* + * Maximum segment size. Could be one segment with the maximum number + * of segments. + */ + mmc->max_seg_size = mmc->max_sectors * 512; + + dev_set_drvdata(dev, mmc); + + return 0; +} + +static void __devexit wbsd_free_mmc(struct device* dev) +{ + struct mmc_host* mmc; + + mmc = dev_get_drvdata(dev); + if (!mmc) + return; + + mmc_free_host(mmc); + + dev_set_drvdata(dev, NULL); +} + +/* + * Scan for known chip id:s + */ + +static int __devinit wbsd_scan(struct wbsd_host* host) { int i, j, k; int id; @@ -1258,12 +1419,16 @@ static int wbsd_scan(struct wbsd_host* host) return -ENODEV; } -static int wbsd_request_regions(struct wbsd_host* host) +/* + * Allocate/free io port ranges + */ + +static int __devinit wbsd_request_region(struct wbsd_host* host, int base) { if (io & 0x7) return -EINVAL; - if (!request_region(io, 8, DRIVER_NAME)) + if (!request_region(base, 8, DRIVER_NAME)) return -EIO; host->base = io; @@ -1271,19 +1436,25 @@ static int wbsd_request_regions(struct wbsd_host* host) return 0; } -static void wbsd_release_regions(struct wbsd_host* host) +static void __devexit wbsd_release_regions(struct wbsd_host* host) { if (host->base) release_region(host->base, 8); + + host->base = 0; if (host->config) release_region(host->config, 2); + + host->config = 0; } -static void wbsd_init_dma(struct wbsd_host* host) +/* + * Allocate/free DMA port and buffer + */ + +static void __devinit wbsd_request_dma(struct wbsd_host* host, int dma) { - host->dma = -1; - if (dma < 0) return; @@ -1294,7 +1465,7 @@ static void wbsd_init_dma(struct wbsd_host* host) * We need to allocate a special buffer in * order for ISA to be able to DMA to it. */ - host->dma_buffer = kmalloc(65536, + host->dma_buffer = kmalloc(WBSD_DMA_SIZE, GFP_NOIO | GFP_DMA | __GFP_REPEAT | __GFP_NOWARN); if (!host->dma_buffer) goto free; @@ -1302,7 +1473,8 @@ static void wbsd_init_dma(struct wbsd_host* host) /* * Translate the address to a physical address. */ - host->dma_addr = isa_virt_to_bus(host->dma_buffer); + host->dma_addr = dma_map_single(host->mmc->dev, host->dma_buffer, + WBSD_DMA_SIZE, DMA_BIDIRECTIONAL); /* * ISA DMA must be aligned on a 64k basis. @@ -1325,6 +1497,10 @@ kfree: */ BUG_ON(1); + dma_unmap_single(host->mmc->dev, host->dma_addr, WBSD_DMA_SIZE, + DMA_BIDIRECTIONAL); + host->dma_addr = (dma_addr_t)NULL; + kfree(host->dma_buffer); host->dma_buffer = NULL; @@ -1336,60 +1512,122 @@ err: "Falling back on FIFO.\n", dma); } -static struct mmc_host_ops wbsd_ops = { - .request = wbsd_request, - .set_ios = wbsd_set_ios, -}; +static void __devexit wbsd_release_dma(struct wbsd_host* host) +{ + if (host->dma_addr) + dma_unmap_single(host->mmc->dev, host->dma_addr, WBSD_DMA_SIZE, + DMA_BIDIRECTIONAL); + if (host->dma_buffer) + kfree(host->dma_buffer); + if (host->dma >= 0) + free_dma(host->dma); + + host->dma = -1; + host->dma_buffer = NULL; + host->dma_addr = (dma_addr_t)NULL; +} /* - * Device probe + * Allocate/free IRQ. */ -static int wbsd_probe(struct device* dev) +static int __devinit wbsd_request_irq(struct wbsd_host* host, int irq) { - struct wbsd_host* host = NULL; - struct mmc_host* mmc = NULL; int ret; /* - * Allocate MMC structure. + * Allocate interrupt. */ - mmc = mmc_alloc_host(sizeof(struct wbsd_host), dev); - if (!mmc) - return -ENOMEM; - - host = mmc_priv(mmc); - host->mmc = mmc; + + ret = request_irq(irq, wbsd_irq, SA_SHIRQ, DRIVER_NAME, host); + if (ret) + return ret; + host->irq = irq; + /* - * Scan for hardware. + * Set up tasklets. */ - ret = wbsd_scan(host); - if (ret) - goto freemmc; + tasklet_init(&host->card_tasklet, wbsd_tasklet_card, (unsigned long)host); + tasklet_init(&host->fifo_tasklet, wbsd_tasklet_fifo, (unsigned long)host); + tasklet_init(&host->crc_tasklet, wbsd_tasklet_crc, (unsigned long)host); + tasklet_init(&host->timeout_tasklet, wbsd_tasklet_timeout, (unsigned long)host); + tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish, (unsigned long)host); + tasklet_init(&host->block_tasklet, wbsd_tasklet_block, (unsigned long)host); + + return 0; +} - /* - * Reset the chip. - */ - wbsd_write_config(host, WBSD_CONF_SWRST, 1); - wbsd_write_config(host, WBSD_CONF_SWRST, 0); +static void __devexit wbsd_release_irq(struct wbsd_host* host) +{ + if (!host->irq) + return; + free_irq(host->irq, host); + + host->irq = 0; + + tasklet_kill(&host->card_tasklet); + tasklet_kill(&host->fifo_tasklet); + tasklet_kill(&host->crc_tasklet); + tasklet_kill(&host->timeout_tasklet); + tasklet_kill(&host->finish_tasklet); + tasklet_kill(&host->block_tasklet); +} + +/* + * Allocate all resources for the host. + */ + +static int __devinit wbsd_request_resources(struct wbsd_host* host, + int base, int irq, int dma) +{ + int ret; + /* * Allocate I/O ports. */ - ret = wbsd_request_regions(host); + ret = wbsd_request_region(host, base); if (ret) - goto release; + return ret; /* - * Set host parameters. + * Allocate interrupt. */ - mmc->ops = &wbsd_ops; - mmc->f_min = 375000; - mmc->f_max = 24000000; - mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34; + ret = wbsd_request_irq(host, irq); + if (ret) + return ret; + + /* + * Allocate DMA. + */ + wbsd_request_dma(host, dma); - spin_lock_init(&host->lock); + return 0; +} + +/* + * Release all resources for the host. + */ + +static void __devexit wbsd_release_resources(struct wbsd_host* host) +{ + wbsd_release_dma(host); + wbsd_release_irq(host); + wbsd_release_regions(host); +} + +/* + * Configure the resources the chip should use. + */ + +static void __devinit wbsd_chip_config(struct wbsd_host* host) +{ + /* + * Reset the chip. + */ + wbsd_write_config(host, WBSD_CONF_SWRST, 1); + wbsd_write_config(host, WBSD_CONF_SWRST, 0); /* * Select SD/MMC function. @@ -1399,165 +1637,241 @@ static int wbsd_probe(struct device* dev) /* * Set up card detection. */ - wbsd_write_config(host, WBSD_CONF_PINS, 0x02); + wbsd_write_config(host, WBSD_CONF_PINS, WBSD_PINS_DETECT_GP11); /* - * Configure I/O port. + * Configure chip */ wbsd_write_config(host, WBSD_CONF_PORT_HI, host->base >> 8); wbsd_write_config(host, WBSD_CONF_PORT_LO, host->base & 0xff); - - /* - * Allocate interrupt. - */ - ret = request_irq(irq, wbsd_irq, SA_SHIRQ, DRIVER_NAME, host); - if (ret) - goto release; - host->irq = irq; + wbsd_write_config(host, WBSD_CONF_IRQ, host->irq); - /* - * Set up tasklets. - */ - tasklet_init(&host->card_tasklet, wbsd_tasklet_card, (unsigned long)host); - tasklet_init(&host->fifo_tasklet, wbsd_tasklet_fifo, (unsigned long)host); - tasklet_init(&host->crc_tasklet, wbsd_tasklet_crc, (unsigned long)host); - tasklet_init(&host->timeout_tasklet, wbsd_tasklet_timeout, (unsigned long)host); - tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish, (unsigned long)host); - tasklet_init(&host->block_tasklet, wbsd_tasklet_block, (unsigned long)host); + if (host->dma >= 0) + wbsd_write_config(host, WBSD_CONF_DRQ, host->dma); /* - * Configure interrupt. + * Enable and power up chip. */ - wbsd_write_config(host, WBSD_CONF_IRQ, host->irq); + wbsd_write_config(host, WBSD_CONF_ENABLE, 1); + wbsd_write_config(host, WBSD_CONF_POWER, 0x20); +} + +/* + * Check that configured resources are correct. + */ + +static int __devinit wbsd_chip_validate(struct wbsd_host* host) +{ + int base, irq, dma; /* - * Allocate DMA. + * Select SD/MMC function. */ - wbsd_init_dma(host); + wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); /* - * If all went well, then configure DMA. + * Read configuration. */ - if (host->dma >= 0) - wbsd_write_config(host, WBSD_CONF_DRQ, host->dma); + base = wbsd_read_config(host, WBSD_CONF_PORT_HI) << 8; + base |= wbsd_read_config(host, WBSD_CONF_PORT_LO); - /* - * Maximum number of segments. Worst case is one sector per segment - * so this will be 64kB/512. - */ - mmc->max_hw_segs = 128; - mmc->max_phys_segs = 128; + irq = wbsd_read_config(host, WBSD_CONF_IRQ); + + dma = wbsd_read_config(host, WBSD_CONF_DRQ); /* - * Maximum number of sectors in one transfer. Also limited by 64kB - * buffer. + * Validate against given configuration. */ - mmc->max_sectors = 128; + if (base != host->base) + return 0; + if (irq != host->irq) + return 0; + if ((dma != host->dma) && (host->dma != -1)) + return 0; + + return 1; +} + +/*****************************************************************************\ + * * + * Devices setup and shutdown * + * * +\*****************************************************************************/ + +static int __devinit wbsd_init(struct device* dev, int base, int irq, int dma, + int pnp) +{ + struct wbsd_host* host = NULL; + struct mmc_host* mmc = NULL; + int ret; + + ret = wbsd_alloc_mmc(dev); + if (ret) + return ret; + + mmc = dev_get_drvdata(dev); + host = mmc_priv(mmc); /* - * Maximum segment size. Could be one segment with the maximum number - * of segments. + * Scan for hardware. */ - mmc->max_seg_size = mmc->max_sectors * 512; + ret = wbsd_scan(host); + if (ret) + { + if (pnp && (ret == -ENODEV)) + { + printk(KERN_WARNING DRIVER_NAME + ": Unable to confirm device presence. You may " + "experience lock-ups.\n"); + } + else + { + wbsd_free_mmc(dev); + return ret; + } + } /* - * Enable chip. + * Request resources. */ - wbsd_write_config(host, WBSD_CONF_ENABLE, 1); + ret = wbsd_request_resources(host, io, irq, dma); + if (ret) + { + wbsd_release_resources(host); + wbsd_free_mmc(dev); + return ret; + } /* - * Power up chip. + * See if chip needs to be configured. */ - wbsd_write_config(host, WBSD_CONF_POWER, 0x20); + if (pnp && (host->config != 0)) + { + if (!wbsd_chip_validate(host)) + { + printk(KERN_WARNING DRIVER_NAME + ": PnP active but chip not configured! " + "You probably have a buggy BIOS. " + "Configuring chip manually.\n"); + wbsd_chip_config(host); + } + } + else + wbsd_chip_config(host); /* * Power Management stuff. No idea how this works. * Not tested. */ #ifdef CONFIG_PM - wbsd_write_config(host, WBSD_CONF_PME, 0xA0); + if (host->config) + wbsd_write_config(host, WBSD_CONF_PME, 0xA0); #endif + /* + * Allow device to initialise itself properly. + */ + mdelay(5); /* * Reset the chip into a known state. */ wbsd_init_device(host); - dev_set_drvdata(dev, mmc); - - /* - * Add host to MMC layer. - */ mmc_add_host(mmc); - printk(KERN_INFO "%s: W83L51xD id %x at 0x%x irq %d dma %d\n", - mmc->host_name, (int)host->chip_id, (int)host->base, - (int)host->irq, (int)host->dma); + printk(KERN_INFO "%s: W83L51xD", mmc->host_name); + if (host->chip_id != 0) + printk(" id %x", (int)host->chip_id); + printk(" at 0x%x irq %d", (int)host->base, (int)host->irq); + if (host->dma >= 0) + printk(" dma %d", (int)host->dma); + else + printk(" FIFO"); + if (pnp) + printk(" PnP"); + printk("\n"); return 0; - -release: - wbsd_release_regions(host); - -freemmc: - mmc_free_host(mmc); - - return ret; } -/* - * Device remove - */ - -static int wbsd_remove(struct device* dev) +static void __devexit wbsd_shutdown(struct device* dev, int pnp) { struct mmc_host* mmc = dev_get_drvdata(dev); struct wbsd_host* host; if (!mmc) - return 0; + return; host = mmc_priv(mmc); - /* - * Unregister host with MMC layer. - */ mmc_remove_host(mmc); - /* - * Power down the SD/MMC function. - */ - wbsd_unlock_config(host); - wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); - wbsd_write_config(host, WBSD_CONF_ENABLE, 0); - wbsd_lock_config(host); + if (!pnp) + { + /* + * Power down the SD/MMC function. + */ + wbsd_unlock_config(host); + wbsd_write_config(host, WBSD_CONF_DEVICE, DEVICE_SD); + wbsd_write_config(host, WBSD_CONF_ENABLE, 0); + wbsd_lock_config(host); + } - /* - * Free resources. - */ - if (host->dma_buffer) - kfree(host->dma_buffer); + wbsd_release_resources(host); - if (host->dma >= 0) - free_dma(host->dma); + wbsd_free_mmc(dev); +} - free_irq(host->irq, host); +/* + * Non-PnP + */ + +static int __devinit wbsd_probe(struct device* dev) +{ + return wbsd_init(dev, io, irq, dma, 0); +} + +static int __devexit wbsd_remove(struct device* dev) +{ + wbsd_shutdown(dev, 0); + + return 0; +} + +/* + * PnP + */ + +#ifdef CONFIG_PNP + +static int __devinit +wbsd_pnp_probe(struct pnp_dev * pnpdev, const struct pnp_device_id *dev_id) +{ + int io, irq, dma; - tasklet_kill(&host->card_tasklet); - tasklet_kill(&host->fifo_tasklet); - tasklet_kill(&host->crc_tasklet); - tasklet_kill(&host->timeout_tasklet); - tasklet_kill(&host->finish_tasklet); - tasklet_kill(&host->block_tasklet); + /* + * Get resources from PnP layer. + */ + io = pnp_port_start(pnpdev, 0); + irq = pnp_irq(pnpdev, 0); + if (pnp_dma_valid(pnpdev, 0)) + dma = pnp_dma(pnpdev, 0); + else + dma = -1; - wbsd_release_regions(host); + DBGF("PnP resources: port %3x irq %d dma %d\n", io, irq, dma); - mmc_free_host(mmc); + return wbsd_init(&pnpdev->dev, io, irq, dma, 1); +} - return 0; +static void __devexit wbsd_pnp_remove(struct pnp_dev * dev) +{ + wbsd_shutdown(&dev->dev, 1); } +#endif /* CONFIG_PNP */ + /* * Power management */ @@ -1581,17 +1895,7 @@ static int wbsd_resume(struct device *dev, u32 level) #define wbsd_resume NULL #endif -static void wbsd_release(struct device *dev) -{ -} - -static struct platform_device wbsd_device = { - .name = DRIVER_NAME, - .id = -1, - .dev = { - .release = wbsd_release, - }, -}; +static struct platform_device *wbsd_device; static struct device_driver wbsd_driver = { .name = DRIVER_NAME, @@ -1603,6 +1907,17 @@ static struct device_driver wbsd_driver = { .resume = wbsd_resume, }; +#ifdef CONFIG_PNP + +static struct pnp_driver wbsd_pnp_driver = { + .name = DRIVER_NAME, + .id_table = pnp_dev_table, + .probe = wbsd_pnp_probe, + .remove = wbsd_pnp_remove, +}; + +#endif /* CONFIG_PNP */ + /* * Module loading/unloading */ @@ -1615,29 +1930,57 @@ static int __init wbsd_drv_init(void) ": Winbond W83L51xD SD/MMC card interface driver, " DRIVER_VERSION "\n"); printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n"); - - result = driver_register(&wbsd_driver); - if (result < 0) - return result; - result = platform_device_register(&wbsd_device); - if (result < 0) - return result; +#ifdef CONFIG_PNP + + if (!nopnp) + { + result = pnp_register_driver(&wbsd_pnp_driver); + if (result < 0) + return result; + } + +#endif /* CONFIG_PNP */ + + if (nopnp) + { + result = driver_register(&wbsd_driver); + if (result < 0) + return result; + + wbsd_device = platform_device_register_simple(DRIVER_NAME, -1, + NULL, 0); + if (IS_ERR(wbsd_device)) + return PTR_ERR(wbsd_device); + } return 0; } static void __exit wbsd_drv_exit(void) { - platform_device_unregister(&wbsd_device); +#ifdef CONFIG_PNP + + if (!nopnp) + pnp_unregister_driver(&wbsd_pnp_driver); - driver_unregister(&wbsd_driver); +#endif /* CONFIG_PNP */ + + if (nopnp) + { + platform_device_unregister(wbsd_device); + + driver_unregister(&wbsd_driver); + } DBG("unloaded\n"); } module_init(wbsd_drv_init); module_exit(wbsd_drv_exit); +#ifdef CONFIG_PNP +module_param(nopnp, uint, 0444); +#endif module_param(io, uint, 0444); module_param(irq, uint, 0444); module_param(dma, int, 0444); @@ -1646,6 +1989,9 @@ MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Winbond W83L51xD SD/MMC card interface driver"); MODULE_VERSION(DRIVER_VERSION); +#ifdef CONFIG_PNP +MODULE_PARM_DESC(nopnp, "Scan for device instead of relying on PNP. (default 0)"); +#endif MODULE_PARM_DESC(io, "I/O base to allocate. Must be 8 byte aligned. (default 0x248)"); MODULE_PARM_DESC(irq, "IRQ to allocate. (default 6)"); MODULE_PARM_DESC(dma, "DMA channel to allocate. -1 for no DMA. (default 2)"); diff --git a/drivers/mmc/wbsd.h b/drivers/mmc/wbsd.h index fdc03b56a81..864f30828d0 100644 --- a/drivers/mmc/wbsd.h +++ b/drivers/mmc/wbsd.h @@ -35,6 +35,12 @@ const int valid_ids[] = { #define DEVICE_SD 0x03 +#define WBSD_PINS_DAT3_HI 0x20 +#define WBSD_PINS_DAT3_OUT 0x10 +#define WBSD_PINS_GP11_HI 0x04 +#define WBSD_PINS_DETECT_GP11 0x02 +#define WBSD_PINS_DETECT_DAT3 0x01 + #define WBSD_CMDR 0x00 #define WBSD_DFR 0x01 #define WBSD_EIR 0x02 @@ -133,6 +139,7 @@ const int valid_ids[] = { #define WBSD_CRC_OK 0x05 /* S010E (00101) */ #define WBSD_CRC_FAIL 0x0B /* S101E (01011) */ +#define WBSD_DMA_SIZE 65536 struct wbsd_host { @@ -140,6 +147,11 @@ struct wbsd_host spinlock_t lock; /* Mutex */ + int flags; /* Driver states */ + +#define WBSD_FCARD_PRESENT (1<<0) /* Card is present */ +#define WBSD_FIGNORE_DETECT (1<<1) /* Ignore card detection */ + struct mmc_request* mrq; /* Current request */ u8 isr; /* Accumulated ISR */ diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index d639cb8dc46..72cdf19e1be 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -54,6 +54,7 @@ #include <linux/config.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/compiler.h> #include <linux/netdevice.h> @@ -91,16 +92,17 @@ KERN_INFO DRV_NAME ": 10/100 PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>"); MODULE_DESCRIPTION("RealTek RTL-8139C+ series 10/100 PCI Ethernet driver"); +MODULE_VERSION(DRV_VERSION); MODULE_LICENSE("GPL"); static int debug = -1; -MODULE_PARM (debug, "i"); +module_param(debug, int, 0); MODULE_PARM_DESC (debug, "8139cp: bitmapped message enable number"); /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). The RTL chips use a 64 element hash table based on the Ethernet CRC. */ static int multicast_filter_limit = 32; -MODULE_PARM (multicast_filter_limit, "i"); +module_param(multicast_filter_limit, int, 0); MODULE_PARM_DESC (multicast_filter_limit, "8139cp: maximum number of filtered multicast addresses"); #define PFX DRV_NAME ": " @@ -186,6 +188,9 @@ enum { RingEnd = (1 << 30), /* End of descriptor ring */ FirstFrag = (1 << 29), /* First segment of a packet */ LastFrag = (1 << 28), /* Final segment of a packet */ + LargeSend = (1 << 27), /* TCP Large Send Offload (TSO) */ + MSSShift = 16, /* MSS value position */ + MSSMask = 0xfff, /* MSS value: 11 bits */ TxError = (1 << 23), /* Tx error summary */ RxError = (1 << 20), /* Rx error summary */ IPCS = (1 << 18), /* Calculate IP checksum */ @@ -312,7 +317,7 @@ struct cp_desc { struct ring_info { struct sk_buff *skb; dma_addr_t mapping; - unsigned frag; + u32 len; }; struct cp_dma_stats { @@ -394,6 +399,9 @@ struct cp_private { static void __cp_set_rx_mode (struct net_device *dev); static void cp_tx (struct cp_private *cp); static void cp_clean_rings (struct cp_private *cp); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void cp_poll_controller(struct net_device *dev); +#endif static struct pci_device_id cp_pci_tbl[] = { { PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139, @@ -688,6 +696,19 @@ cp_interrupt (int irq, void *dev_instance, struct pt_regs *regs) return IRQ_HANDLED; } +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling receive - used by netconsole and other diagnostic tools + * to allow network i/o with interrupts disabled. + */ +static void cp_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + cp_interrupt(dev->irq, dev, NULL); + enable_irq(dev->irq); +} +#endif + static void cp_tx (struct cp_private *cp) { unsigned tx_head = cp->tx_head; @@ -707,7 +728,7 @@ static void cp_tx (struct cp_private *cp) BUG(); pci_unmap_single(cp->pdev, cp->tx_skb[tx_tail].mapping, - skb->len, PCI_DMA_TODEVICE); + cp->tx_skb[tx_tail].len, PCI_DMA_TODEVICE); if (status & LastFrag) { if (status & (TxError | TxFIFOUnder)) { @@ -749,10 +770,11 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) { struct cp_private *cp = netdev_priv(dev); unsigned entry; - u32 eor; + u32 eor, flags; #if CP_VLAN_TAG_USED u32 vlan_tag = 0; #endif + int mss = 0; spin_lock_irq(&cp->lock); @@ -772,6 +794,9 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) entry = cp->tx_head; eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0; + if (dev->features & NETIF_F_TSO) + mss = skb_shinfo(skb)->tso_size; + if (skb_shinfo(skb)->nr_frags == 0) { struct cp_desc *txd = &cp->tx_ring[entry]; u32 len; @@ -783,26 +808,26 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) txd->addr = cpu_to_le64(mapping); wmb(); - if (skb->ip_summed == CHECKSUM_HW) { + flags = eor | len | DescOwn | FirstFrag | LastFrag; + + if (mss) + flags |= LargeSend | ((mss & MSSMask) << MSSShift); + else if (skb->ip_summed == CHECKSUM_HW) { const struct iphdr *ip = skb->nh.iph; if (ip->protocol == IPPROTO_TCP) - txd->opts1 = cpu_to_le32(eor | len | DescOwn | - FirstFrag | LastFrag | - IPCS | TCPCS); + flags |= IPCS | TCPCS; else if (ip->protocol == IPPROTO_UDP) - txd->opts1 = cpu_to_le32(eor | len | DescOwn | - FirstFrag | LastFrag | - IPCS | UDPCS); + flags |= IPCS | UDPCS; else - BUG(); - } else - txd->opts1 = cpu_to_le32(eor | len | DescOwn | - FirstFrag | LastFrag); + WARN_ON(1); /* we need a WARN() */ + } + + txd->opts1 = cpu_to_le32(flags); wmb(); cp->tx_skb[entry].skb = skb; cp->tx_skb[entry].mapping = mapping; - cp->tx_skb[entry].frag = 0; + cp->tx_skb[entry].len = len; entry = NEXT_TX(entry); } else { struct cp_desc *txd; @@ -820,7 +845,7 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) first_len, PCI_DMA_TODEVICE); cp->tx_skb[entry].skb = skb; cp->tx_skb[entry].mapping = first_mapping; - cp->tx_skb[entry].frag = 1; + cp->tx_skb[entry].len = first_len; entry = NEXT_TX(entry); for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) { @@ -836,16 +861,19 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) len, PCI_DMA_TODEVICE); eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0; - if (skb->ip_summed == CHECKSUM_HW) { - ctrl = eor | len | DescOwn | IPCS; + ctrl = eor | len | DescOwn; + + if (mss) + ctrl |= LargeSend | + ((mss & MSSMask) << MSSShift); + else if (skb->ip_summed == CHECKSUM_HW) { if (ip->protocol == IPPROTO_TCP) - ctrl |= TCPCS; + ctrl |= IPCS | TCPCS; else if (ip->protocol == IPPROTO_UDP) - ctrl |= UDPCS; + ctrl |= IPCS | UDPCS; else BUG(); - } else - ctrl = eor | len | DescOwn; + } if (frag == skb_shinfo(skb)->nr_frags - 1) ctrl |= LastFrag; @@ -860,7 +888,7 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) cp->tx_skb[entry].skb = skb; cp->tx_skb[entry].mapping = mapping; - cp->tx_skb[entry].frag = frag + 2; + cp->tx_skb[entry].len = len; entry = NEXT_TX(entry); } @@ -1074,7 +1102,6 @@ static int cp_refill_rx (struct cp_private *cp) cp->rx_skb[i].mapping = pci_map_single(cp->pdev, skb->tail, cp->rx_buf_sz, PCI_DMA_FROMDEVICE); cp->rx_skb[i].skb = skb; - cp->rx_skb[i].frag = 0; cp->rx_ring[i].opts2 = 0; cp->rx_ring[i].addr = cpu_to_le64(cp->rx_skb[i].mapping); @@ -1126,9 +1153,6 @@ static void cp_clean_rings (struct cp_private *cp) { unsigned i; - memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE); - memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE); - for (i = 0; i < CP_RX_RING_SIZE; i++) { if (cp->rx_skb[i].skb) { pci_unmap_single(cp->pdev, cp->rx_skb[i].mapping, @@ -1140,13 +1164,18 @@ static void cp_clean_rings (struct cp_private *cp) for (i = 0; i < CP_TX_RING_SIZE; i++) { if (cp->tx_skb[i].skb) { struct sk_buff *skb = cp->tx_skb[i].skb; + pci_unmap_single(cp->pdev, cp->tx_skb[i].mapping, - skb->len, PCI_DMA_TODEVICE); - dev_kfree_skb(skb); + cp->tx_skb[i].len, PCI_DMA_TODEVICE); + if (le32_to_cpu(cp->tx_ring[i].opts1) & LastFrag) + dev_kfree_skb(skb); cp->net_stats.tx_dropped++; } } + memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE); + memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE); + memset(&cp->rx_skb, 0, sizeof(struct ring_info) * CP_RX_RING_SIZE); memset(&cp->tx_skb, 0, sizeof(struct ring_info) * CP_TX_RING_SIZE); } @@ -1538,6 +1567,8 @@ static struct ethtool_ops cp_ethtool_ops = { .set_tx_csum = ethtool_op_set_tx_csum, /* local! */ .get_sg = ethtool_op_get_sg, .set_sg = ethtool_op_set_sg, + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, .get_regs = cp_get_regs, .get_wol = cp_get_wol, .set_wol = cp_set_wol, @@ -1749,6 +1780,9 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) dev->get_stats = cp_get_stats; dev->do_ioctl = cp_ioctl; dev->poll = cp_rx_poll; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = cp_poll_controller; +#endif dev->weight = 16; /* arbitrary? from NAPI_HOWTO.txt. */ #ifdef BROKEN dev->change_mtu = cp_change_mtu; @@ -1768,6 +1802,10 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (pci_using_dac) dev->features |= NETIF_F_HIGHDMA; +#if 0 /* disabled by default until verified */ + dev->features |= NETIF_F_TSO; +#endif + dev->irq = pdev->irq; rc = register_netdev(dev); diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index d4bd20c21a1..047202c4d9a 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -569,7 +569,7 @@ struct rtl_extra_stats { }; struct rtl8139_private { - void *mmio_addr; + void __iomem *mmio_addr; int drv_flags; struct pci_dev *pci_dev; u32 msg_enable; @@ -614,7 +614,7 @@ MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered mu MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps"); MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)"); -static int read_eeprom (void *ioaddr, int location, int addr_len); +static int read_eeprom (void __iomem *ioaddr, int location, int addr_len); static int rtl8139_open (struct net_device *dev); static int mdio_read (struct net_device *dev, int phy_id, int location); static void mdio_write (struct net_device *dev, int phy_id, int location, @@ -638,46 +638,20 @@ static void __set_rx_mode (struct net_device *dev); static void rtl8139_hw_start (struct net_device *dev); static struct ethtool_ops rtl8139_ethtool_ops; -#ifdef USE_IO_OPS - -#define RTL_R8(reg) inb (((unsigned long)ioaddr) + (reg)) -#define RTL_R16(reg) inw (((unsigned long)ioaddr) + (reg)) -#define RTL_R32(reg) ((unsigned long) inl (((unsigned long)ioaddr) + (reg))) -#define RTL_W8(reg, val8) outb ((val8), ((unsigned long)ioaddr) + (reg)) -#define RTL_W16(reg, val16) outw ((val16), ((unsigned long)ioaddr) + (reg)) -#define RTL_W32(reg, val32) outl ((val32), ((unsigned long)ioaddr) + (reg)) -#define RTL_W8_F RTL_W8 -#define RTL_W16_F RTL_W16 -#define RTL_W32_F RTL_W32 -#undef readb -#undef readw -#undef readl -#undef writeb -#undef writew -#undef writel -#define readb(addr) inb((unsigned long)(addr)) -#define readw(addr) inw((unsigned long)(addr)) -#define readl(addr) inl((unsigned long)(addr)) -#define writeb(val,addr) outb((val),(unsigned long)(addr)) -#define writew(val,addr) outw((val),(unsigned long)(addr)) -#define writel(val,addr) outl((val),(unsigned long)(addr)) - -#else - /* write MMIO register, with flush */ /* Flush avoids rtl8139 bug w/ posted MMIO writes */ -#define RTL_W8_F(reg, val8) do { writeb ((val8), ioaddr + (reg)); readb (ioaddr + (reg)); } while (0) -#define RTL_W16_F(reg, val16) do { writew ((val16), ioaddr + (reg)); readw (ioaddr + (reg)); } while (0) -#define RTL_W32_F(reg, val32) do { writel ((val32), ioaddr + (reg)); readl (ioaddr + (reg)); } while (0) +#define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0) +#define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0) +#define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0) #define MMIO_FLUSH_AUDIT_COMPLETE 1 #if MMIO_FLUSH_AUDIT_COMPLETE /* write MMIO register */ -#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg)) -#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg)) -#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg)) +#define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg)) +#define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg)) +#define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg)) #else @@ -689,11 +663,9 @@ static struct ethtool_ops rtl8139_ethtool_ops; #endif /* MMIO_FLUSH_AUDIT_COMPLETE */ /* read MMIO register */ -#define RTL_R8(reg) readb (ioaddr + (reg)) -#define RTL_R16(reg) readw (ioaddr + (reg)) -#define RTL_R32(reg) ((unsigned long) readl (ioaddr + (reg))) - -#endif /* USE_IO_OPS */ +#define RTL_R8(reg) ioread8 (ioaddr + (reg)) +#define RTL_R16(reg) ioread16 (ioaddr + (reg)) +#define RTL_R32(reg) ((unsigned long) ioread32 (ioaddr + (reg))) static const u16 rtl8139_intr_mask = @@ -740,10 +712,13 @@ static void __rtl8139_cleanup_dev (struct net_device *dev) assert (tp->pci_dev != NULL); pdev = tp->pci_dev; -#ifndef USE_IO_OPS +#ifdef USE_IO_OPS + if (tp->mmio_addr) + ioport_unmap (tp->mmio_addr); +#else if (tp->mmio_addr) - iounmap (tp->mmio_addr); -#endif /* !USE_IO_OPS */ + pci_iounmap (pdev, tp->mmio_addr); +#endif /* USE_IO_OPS */ /* it's ok to call this even if we have no regions to free */ pci_release_regions (pdev); @@ -753,7 +728,7 @@ static void __rtl8139_cleanup_dev (struct net_device *dev) } -static void rtl8139_chip_reset (void *ioaddr) +static void rtl8139_chip_reset (void __iomem *ioaddr) { int i; @@ -773,7 +748,7 @@ static void rtl8139_chip_reset (void *ioaddr) static int __devinit rtl8139_init_board (struct pci_dev *pdev, struct net_device **dev_out) { - void *ioaddr; + void __iomem *ioaddr; struct net_device *dev; struct rtl8139_private *tp; u8 tmp8; @@ -855,13 +830,18 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, pci_set_master (pdev); #ifdef USE_IO_OPS - ioaddr = (void *) pio_start; + ioaddr = ioport_map(pio_start, pio_len); + if (!ioaddr) { + printk (KERN_ERR PFX "%s: cannot map PIO, aborting\n", pci_name(pdev)); + rc = -EIO; + goto err_out; + } dev->base_addr = pio_start; tp->mmio_addr = ioaddr; tp->regs_len = pio_len; #else /* ioremap MMIO region */ - ioaddr = ioremap (mmio_start, mmio_len); + ioaddr = pci_iomap(pdev, 1, 0); if (ioaddr == NULL) { printk (KERN_ERR PFX "%s: cannot remap MMIO, aborting\n", pci_name(pdev)); rc = -EIO; @@ -947,7 +927,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, struct net_device *dev = NULL; struct rtl8139_private *tp; int i, addr_len, option; - void *ioaddr; + void __iomem *ioaddr; static int board_idx = -1; u8 pci_rev; @@ -1147,47 +1127,46 @@ static void __devexit rtl8139_remove_one (struct pci_dev *pdev) No extra delay is needed with 33Mhz PCI, but 66Mhz may change this. */ -#define eeprom_delay() readl(ee_addr) +#define eeprom_delay() RTL_R32(Cfg9346) /* The EEPROM commands include the alway-set leading bit. */ #define EE_WRITE_CMD (5) #define EE_READ_CMD (6) #define EE_ERASE_CMD (7) -static int __devinit read_eeprom (void *ioaddr, int location, int addr_len) +static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len) { int i; unsigned retval = 0; - void *ee_addr = ioaddr + Cfg9346; int read_cmd = location | (EE_READ_CMD << addr_len); - writeb (EE_ENB & ~EE_CS, ee_addr); - writeb (EE_ENB, ee_addr); + RTL_W8 (Cfg9346, EE_ENB & ~EE_CS); + RTL_W8 (Cfg9346, EE_ENB); eeprom_delay (); /* Shift the read command bits out. */ for (i = 4 + addr_len; i >= 0; i--) { int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; - writeb (EE_ENB | dataval, ee_addr); + RTL_W8 (Cfg9346, EE_ENB | dataval); eeprom_delay (); - writeb (EE_ENB | dataval | EE_SHIFT_CLK, ee_addr); + RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK); eeprom_delay (); } - writeb (EE_ENB, ee_addr); + RTL_W8 (Cfg9346, EE_ENB); eeprom_delay (); for (i = 16; i > 0; i--) { - writeb (EE_ENB | EE_SHIFT_CLK, ee_addr); + RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK); eeprom_delay (); retval = - (retval << 1) | ((readb (ee_addr) & EE_DATA_READ) ? 1 : + (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 : 0); - writeb (EE_ENB, ee_addr); + RTL_W8 (Cfg9346, EE_ENB); eeprom_delay (); } /* Terminate the EEPROM access. */ - writeb (~EE_CS, ee_addr); + RTL_W8 (Cfg9346, ~EE_CS); eeprom_delay (); return retval; @@ -1206,7 +1185,7 @@ static int __devinit read_eeprom (void *ioaddr, int location, int addr_len) #define MDIO_WRITE0 (MDIO_DIR) #define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT) -#define mdio_delay(mdio_addr) readb(mdio_addr) +#define mdio_delay() RTL_R8(Config4) static char mii_2_8139_map[8] = { @@ -1223,15 +1202,15 @@ static char mii_2_8139_map[8] = { #ifdef CONFIG_8139TOO_8129 /* Syncronize the MII management interface by shifting 32 one bits out. */ -static void mdio_sync (void *mdio_addr) +static void mdio_sync (void __iomem *ioaddr) { int i; for (i = 32; i >= 0; i--) { - writeb (MDIO_WRITE1, mdio_addr); - mdio_delay (mdio_addr); - writeb (MDIO_WRITE1 | MDIO_CLK, mdio_addr); - mdio_delay (mdio_addr); + RTL_W8 (Config4, MDIO_WRITE1); + mdio_delay (); + RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK); + mdio_delay (); } } #endif @@ -1241,35 +1220,36 @@ static int mdio_read (struct net_device *dev, int phy_id, int location) struct rtl8139_private *tp = netdev_priv(dev); int retval = 0; #ifdef CONFIG_8139TOO_8129 - void *mdio_addr = tp->mmio_addr + Config4; + void __iomem *ioaddr = tp->mmio_addr; int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; int i; #endif if (phy_id > 31) { /* Really a 8139. Use internal registers. */ + void __iomem *ioaddr = tp->mmio_addr; return location < 8 && mii_2_8139_map[location] ? - readw (tp->mmio_addr + mii_2_8139_map[location]) : 0; + RTL_R16 (mii_2_8139_map[location]) : 0; } #ifdef CONFIG_8139TOO_8129 - mdio_sync (mdio_addr); + mdio_sync (ioaddr); /* Shift the read command bits out. */ for (i = 15; i >= 0; i--) { int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0; - writeb (MDIO_DIR | dataval, mdio_addr); - mdio_delay (mdio_addr); - writeb (MDIO_DIR | dataval | MDIO_CLK, mdio_addr); - mdio_delay (mdio_addr); + RTL_W8 (Config4, MDIO_DIR | dataval); + mdio_delay (); + RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK); + mdio_delay (); } /* Read the two transition, 16 data, and wire-idle bits. */ for (i = 19; i > 0; i--) { - writeb (0, mdio_addr); - mdio_delay (mdio_addr); - retval = (retval << 1) | ((readb (mdio_addr) & MDIO_DATA_IN) ? 1 : 0); - writeb (MDIO_CLK, mdio_addr); - mdio_delay (mdio_addr); + RTL_W8 (Config4, 0); + mdio_delay (); + retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0); + RTL_W8 (Config4, MDIO_CLK); + mdio_delay (); } #endif @@ -1282,13 +1262,13 @@ static void mdio_write (struct net_device *dev, int phy_id, int location, { struct rtl8139_private *tp = netdev_priv(dev); #ifdef CONFIG_8139TOO_8129 - void *mdio_addr = tp->mmio_addr + Config4; + void __iomem *ioaddr = tp->mmio_addr; int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value; int i; #endif if (phy_id > 31) { /* Really a 8139. Use internal registers. */ - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; if (location == 0) { RTL_W8 (Cfg9346, Cfg9346_Unlock); RTL_W16 (BasicModeCtrl, value); @@ -1299,23 +1279,23 @@ static void mdio_write (struct net_device *dev, int phy_id, int location, } #ifdef CONFIG_8139TOO_8129 - mdio_sync (mdio_addr); + mdio_sync (ioaddr); /* Shift the command bits out. */ for (i = 31; i >= 0; i--) { int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; - writeb (dataval, mdio_addr); - mdio_delay (mdio_addr); - writeb (dataval | MDIO_CLK, mdio_addr); - mdio_delay (mdio_addr); + RTL_W8 (Config4, dataval); + mdio_delay (); + RTL_W8 (Config4, dataval | MDIO_CLK); + mdio_delay (); } /* Clear out extra bits. */ for (i = 2; i > 0; i--) { - writeb (0, mdio_addr); - mdio_delay (mdio_addr); - writeb (MDIO_CLK, mdio_addr); - mdio_delay (mdio_addr); + RTL_W8 (Config4, 0); + mdio_delay (); + RTL_W8 (Config4, MDIO_CLK); + mdio_delay (); } #endif } @@ -1325,7 +1305,7 @@ static int rtl8139_open (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); int retval; - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; retval = request_irq (dev->irq, rtl8139_interrupt, SA_SHIRQ, dev->name, dev); if (retval) @@ -1382,7 +1362,7 @@ static void rtl_check_media (struct net_device *dev, unsigned int init_media) static void rtl8139_hw_start (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; u32 i; u8 tmp; @@ -1484,7 +1464,7 @@ static void rtl8139_tune_twister (struct net_device *dev, struct rtl8139_private *tp) { int linkcase; - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; /* This is a complicated state machine to configure the "twister" for impedance/echos based on the cable length. @@ -1568,7 +1548,7 @@ static void rtl8139_tune_twister (struct net_device *dev, static inline void rtl8139_thread_iter (struct net_device *dev, struct rtl8139_private *tp, - void *ioaddr) + void __iomem *ioaddr) { int mii_lpa; @@ -1676,7 +1656,7 @@ static inline void rtl8139_tx_clear (struct rtl8139_private *tp) static void rtl8139_tx_timeout (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; int i; u8 tmp8; unsigned long flags; @@ -1721,7 +1701,7 @@ static void rtl8139_tx_timeout (struct net_device *dev) static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; unsigned int entry; unsigned int len = skb->len; @@ -1763,7 +1743,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev) static void rtl8139_tx_interrupt (struct net_device *dev, struct rtl8139_private *tp, - void *ioaddr) + void __iomem *ioaddr) { unsigned long dirty_tx, tx_left; @@ -1833,7 +1813,7 @@ static void rtl8139_tx_interrupt (struct net_device *dev, /* TODO: clean this up! Rx reset need not be this intensive */ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev, - struct rtl8139_private *tp, void *ioaddr) + struct rtl8139_private *tp, void __iomem *ioaddr) { u8 tmp8; #ifdef CONFIG_8139_OLD_RX_RESET @@ -1930,7 +1910,7 @@ static __inline__ void wrap_copy(struct sk_buff *skb, const unsigned char *ring, static void rtl8139_isr_ack(struct rtl8139_private *tp) { - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; u16 status; status = RTL_R16 (IntrStatus) & RxAckBits; @@ -1949,7 +1929,7 @@ static void rtl8139_isr_ack(struct rtl8139_private *tp) static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp, int budget) { - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; int received = 0; unsigned char *rx_ring = tp->rx_ring; unsigned int cur_rx = tp->cur_rx; @@ -2087,7 +2067,7 @@ out: static void rtl8139_weird_interrupt (struct net_device *dev, struct rtl8139_private *tp, - void *ioaddr, + void __iomem *ioaddr, int status, int link_changed) { DPRINTK ("%s: Abnormal interrupt, status %8.8x.\n", @@ -2127,7 +2107,7 @@ static void rtl8139_weird_interrupt (struct net_device *dev, static int rtl8139_poll(struct net_device *dev, int *budget) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; int orig_budget = min(*budget, dev->quota); int done = 1; @@ -2165,7 +2145,7 @@ static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance, { struct net_device *dev = (struct net_device *) dev_instance; struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; u16 status, ackstat; int link_changed = 0; /* avoid bogus "uninit" warning */ int handled = 0; @@ -2241,7 +2221,7 @@ static void rtl8139_poll_controller(struct net_device *dev) static int rtl8139_close (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; int ret = 0; unsigned long flags; @@ -2304,7 +2284,7 @@ static int rtl8139_close (struct net_device *dev) static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct rtl8139_private *np = netdev_priv(dev); - void *ioaddr = np->mmio_addr; + void __iomem *ioaddr = np->mmio_addr; spin_lock_irq(&np->lock); if (rtl_chip_info[np->chipset].flags & HasLWake) { @@ -2338,7 +2318,7 @@ static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct rtl8139_private *np = netdev_priv(dev); - void *ioaddr = np->mmio_addr; + void __iomem *ioaddr = np->mmio_addr; u32 support; u8 cfg3, cfg5; @@ -2506,7 +2486,7 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) static struct net_device_stats *rtl8139_get_stats (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; unsigned long flags; if (netif_running(dev)) { @@ -2525,7 +2505,7 @@ static struct net_device_stats *rtl8139_get_stats (struct net_device *dev) static void __set_rx_mode (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; u32 mc_filter[2]; /* Multicast hash filter */ int i, rx_mode; u32 tmp; @@ -2586,7 +2566,7 @@ static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state) { struct net_device *dev = pci_get_drvdata (pdev); struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; unsigned long flags; pci_save_state (pdev); diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 3a0a55b62aa..60e3b968553 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -824,6 +824,18 @@ config SMC9194 <file:Documentation/networking/net-modules.txt>. The module will be called smc9194. +config DM9000 + tristate "DM9000 support" + depends on ARM && NET_ETHERNET + select CRC32 + select MII + ---help--- + Support for DM9000 chipset. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module will be + called dm9000. + config NET_VENDOR_RACAL bool "Racal-Interlan (Micom) NI cards" depends on NET_ETHERNET && ISA @@ -989,21 +1001,6 @@ config EEXPRESS_PRO <file:Documentation/networking/net-modules.txt>. The module will be called eepro. -config FMV18X - tristate "FMV-181/182/183/184 support (OBSOLETE)" - depends on NET_ISA && OBSOLETE - ---help--- - If you have a Fujitsu FMV-181/182/183/184 network (Ethernet) card, - say Y and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - If you use an FMV-183 or FMV-184 and it is not working, you may need - to disable Plug & Play mode of the card. - - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module - will be called fmv18x. - config HPLAN_PLUS tristate "HP PCLAN+ (27247B and 27252A) support" depends on NET_ISA @@ -1092,14 +1089,6 @@ config SEEQ8005 <file:Documentation/networking/net-modules.txt>. The module will be called seeq8005. -config SK_G16 - tristate "SK_G16 support (OBSOLETE)" - depends on NET_ISA && OBSOLETE - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - config SKMC tristate "SKnet MCA support" depends on NET_ETHERNET && MCA && BROKEN @@ -1555,6 +1544,7 @@ config SIS900 tristate "SiS 900/7016 PCI Fast Ethernet Adapter support" depends on NET_PCI && PCI select CRC32 + select MII ---help--- This is a driver for the Fast Ethernet PCI network cards based on the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in @@ -2031,6 +2021,15 @@ config TIGON3 To compile this driver as a module, choose M here: the module will be called tg3. This is recommended. +config BNX2 + tristate "Broadcom NetXtremeII support" + depends on PCI + help + This driver supports Broadcom NetXtremeII gigabit Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called bnx2. This is recommended. + config GIANFAR tristate "Gianfar Ethernet" depends on 85xx || 83xx diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 6202b10dbb4..a8a65671805 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_NS83820) += ns83820.o obj-$(CONFIG_STNIC) += stnic.o 8390.o obj-$(CONFIG_FEALNX) += fealnx.o obj-$(CONFIG_TIGON3) += tg3.o +obj-$(CONFIG_BNX2) += bnx2.o obj-$(CONFIG_TC35815) += tc35815.o obj-$(CONFIG_SK98LIN) += sk98lin/ obj-$(CONFIG_SKFP) += skfp/ @@ -73,7 +74,6 @@ obj-$(CONFIG_MAC8390) += mac8390.o 8390.o obj-$(CONFIG_APNE) += apne.o 8390.o obj-$(CONFIG_PCMCIA_PCNET) += 8390.o obj-$(CONFIG_SHAPER) += shaper.o -obj-$(CONFIG_SK_G16) += sk_g16.o obj-$(CONFIG_HP100) += hp100.o obj-$(CONFIG_SMC9194) += smc9194.o obj-$(CONFIG_FEC) += fec.o @@ -121,7 +121,6 @@ obj-$(CONFIG_DEFXX) += defxx.o obj-$(CONFIG_SGISEEQ) += sgiseeq.o obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o obj-$(CONFIG_AT1700) += at1700.o -obj-$(CONFIG_FMV18X) += fmv18x.o obj-$(CONFIG_EL1) += 3c501.o obj-$(CONFIG_EL16) += 3c507.o obj-$(CONFIG_ELMC) += 3c523.o @@ -179,6 +178,7 @@ obj-$(CONFIG_AMD8111_ETH) += amd8111e.o obj-$(CONFIG_IBMVETH) += ibmveth.o obj-$(CONFIG_S2IO) += s2io.o obj-$(CONFIG_SMC91X) += smc91x.o +obj-$(CONFIG_DM9000) += dm9000.o obj-$(CONFIG_FEC_8XX) += fec_8xx/ obj-$(CONFIG_ARM) += arm/ @@ -187,7 +187,7 @@ obj-$(CONFIG_TR) += tokenring/ obj-$(CONFIG_WAN) += wan/ obj-$(CONFIG_ARCNET) += arcnet/ obj-$(CONFIG_NET_PCMCIA) += pcmcia/ -obj-$(CONFIG_NET_WIRELESS) += wireless/ +obj-$(CONFIG_NET_RADIO) += wireless/ obj-$(CONFIG_NET_TULIP) += tulip/ obj-$(CONFIG_HAMRADIO) += hamradio/ obj-$(CONFIG_IRDA) += irda/ diff --git a/drivers/net/Space.c b/drivers/net/Space.c index fb433325aa2..3707df6b0cf 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -210,9 +210,6 @@ static struct devprobe2 isa_probes[] __initdata = { #ifdef CONFIG_AT1700 {at1700_probe, 0}, #endif -#ifdef CONFIG_FMV18X /* Fujitsu FMV-181/182 */ - {fmv18x_probe, 0}, -#endif #ifdef CONFIG_ETH16I {eth16i_probe, 0}, /* ICL EtherTeam 16i/32 */ #endif @@ -243,9 +240,6 @@ static struct devprobe2 isa_probes[] __initdata = { #ifdef CONFIG_ELPLUS /* 3c505 */ {elplus_probe, 0}, #endif -#ifdef CONFIG_SK_G16 - {SK_init, 0}, -#endif #ifdef CONFIG_NI5010 {ni5010_probe, 0}, #endif diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index f2e937abf7b..b7dd7260caf 100755 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -738,6 +738,7 @@ static int amd8111e_rx_poll(struct net_device *dev, int * budget) short vtag; #endif int rx_pkt_limit = dev->quota; + unsigned long flags; do{ /* process receive packets until we use the quota*/ @@ -841,18 +842,19 @@ static int amd8111e_rx_poll(struct net_device *dev, int * budget) /* Receive descriptor is empty now */ dev->quota -= num_rx_pkt; *budget -= num_rx_pkt; + + spin_lock_irqsave(&lp->lock, flags); netif_rx_complete(dev); - /* enable receive interrupt */ writel(VAL0|RINTEN0, mmio + INTEN0); writel(VAL2 | RDMD0, mmio + CMD0); + spin_unlock_irqrestore(&lp->lock, flags); return 0; + rx_not_empty: /* Do not call a netif_rx_complete */ dev->quota -= num_rx_pkt; *budget -= num_rx_pkt; return 1; - - } #else @@ -1261,18 +1263,20 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id, struct pt_regs *reg struct net_device * dev = (struct net_device *) dev_id; struct amd8111e_priv *lp = netdev_priv(dev); void __iomem *mmio = lp->mmio; - unsigned int intr0; + unsigned int intr0, intren0; unsigned int handled = 1; - if(dev == NULL) + if(unlikely(dev == NULL)) return IRQ_NONE; - if (regs) spin_lock (&lp->lock); + spin_lock(&lp->lock); + /* disabling interrupt */ writel(INTREN, mmio + CMD0); /* Read interrupt status */ intr0 = readl(mmio + INT0); + intren0 = readl(mmio + INTEN0); /* Process all the INT event until INTR bit is clear. */ @@ -1293,11 +1297,11 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id, struct pt_regs *reg /* Schedule a polling routine */ __netif_rx_schedule(dev); } - else { + else if (intren0 & RINTEN0) { printk("************Driver bug! \ interrupt while in poll\n"); - /* Fix by disabling interrupts */ - writel(RINT0, mmio + INT0); + /* Fix by disable receive interrupts */ + writel(RINTEN0, mmio + INTEN0); } } #else @@ -1321,7 +1325,7 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id, struct pt_regs *reg err_no_interrupt: writel( VAL0 | INTREN,mmio + CMD0); - if (regs) spin_unlock(&lp->lock); + spin_unlock(&lp->lock); return IRQ_RETVAL(handled); } diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c index 942a2819576..2e28c201dcc 100644 --- a/drivers/net/arm/etherh.c +++ b/drivers/net/arm/etherh.c @@ -68,6 +68,7 @@ struct etherh_priv { void __iomem *dma_base; unsigned int id; void __iomem *ctrl_port; + void __iomem *base; unsigned char ctrl; u32 supported; }; @@ -177,7 +178,7 @@ etherh_setif(struct net_device *dev) switch (etherh_priv(dev)->id) { case PROD_I3_ETHERLAN600: case PROD_I3_ETHERLAN600A: - addr = (void *)dev->base_addr + EN0_RCNTHI; + addr = etherh_priv(dev)->base + EN0_RCNTHI; switch (dev->if_port) { case IF_PORT_10BASE2: @@ -218,7 +219,7 @@ etherh_getifstat(struct net_device *dev) switch (etherh_priv(dev)->id) { case PROD_I3_ETHERLAN600: case PROD_I3_ETHERLAN600A: - addr = (void *)dev->base_addr + EN0_RCNTHI; + addr = etherh_priv(dev)->base + EN0_RCNTHI; switch (dev->if_port) { case IF_PORT_10BASE2: stat = 1; @@ -281,7 +282,7 @@ static void etherh_reset(struct net_device *dev) { struct ei_device *ei_local = netdev_priv(dev); - void __iomem *addr = (void *)dev->base_addr; + void __iomem *addr = etherh_priv(dev)->base; writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr); @@ -327,7 +328,7 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf ei_local->dmaing = 1; - addr = (void *)dev->base_addr; + addr = etherh_priv(dev)->base; dma_base = etherh_priv(dev)->dma_base; count = (count + 1) & ~1; @@ -387,7 +388,7 @@ etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int ei_local->dmaing = 1; - addr = (void *)dev->base_addr; + addr = etherh_priv(dev)->base; dma_base = etherh_priv(dev)->dma_base; buf = skb->data; @@ -427,7 +428,7 @@ etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_p ei_local->dmaing = 1; - addr = (void *)dev->base_addr; + addr = etherh_priv(dev)->base; dma_base = etherh_priv(dev)->dma_base; writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD); @@ -696,7 +697,8 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id) eh->ctrl_port = eh->ioc_fast; } - dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset; + eh->base = eh->memc + data->ns8390_offset; + dev->base_addr = (unsigned long)eh->base; eh->dma_base = eh->memc + data->dataport_offset; eh->ctrl_port += data->ctrlport_offset; diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 5a2efd343db..c82b9cd1c92 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -1681,10 +1681,6 @@ static int au1000_init(struct net_device *dev) control |= MAC_FULL_DUPLEX; } - /* fix for startup without cable */ - if (!link) - dev->flags &= ~IFF_RUNNING; - aup->mac->control = control; aup->mac->vlan1_tag = 0x8100; /* activate vlan support */ au_sync(); @@ -1709,16 +1705,14 @@ static void au1000_timer(unsigned long data) if_port = dev->if_port; if (aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed) == 0) { if (link) { - if (!(dev->flags & IFF_RUNNING)) { + if (!netif_carrier_ok(dev)) { netif_carrier_on(dev); - dev->flags |= IFF_RUNNING; printk(KERN_INFO "%s: link up\n", dev->name); } } else { - if (dev->flags & IFF_RUNNING) { + if (netif_carrier_ok(dev)) { netif_carrier_off(dev); - dev->flags &= ~IFF_RUNNING; dev->if_port = 0; printk(KERN_INFO "%s: link down\n", dev->name); } diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c index 734bd4ee3f9..00e5257b176 100644 --- a/drivers/net/bmac.c +++ b/drivers/net/bmac.c @@ -1412,7 +1412,6 @@ static int bmac_open(struct net_device *dev) bp->opened = 1; bmac_reset_and_enable(dev); enable_irq(dev->irq); - dev->flags |= IFF_RUNNING; return 0; } @@ -1425,7 +1424,6 @@ static int bmac_close(struct net_device *dev) int i; bp->sleeping = 1; - dev->flags &= ~(IFF_UP | IFF_RUNNING); /* disable rx and tx */ config = bmread(dev, RXCFG); diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c new file mode 100644 index 00000000000..8acc655ec1e --- /dev/null +++ b/drivers/net/bnx2.c @@ -0,0 +1,5530 @@ +/* bnx2.c: Broadcom NX2 network driver. + * + * Copyright (c) 2004, 2005 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Written by: Michael Chan (mchan@broadcom.com) + */ + +#include "bnx2.h" +#include "bnx2_fw.h" + +#define DRV_MODULE_NAME "bnx2" +#define PFX DRV_MODULE_NAME ": " +#define DRV_MODULE_VERSION "1.2.19" +#define DRV_MODULE_RELDATE "May 23, 2005" + +#define RUN_AT(x) (jiffies + (x)) + +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (5*HZ) + +static char version[] __devinitdata = + "Broadcom NetXtreme II Gigabit Ethernet Driver " DRV_MODULE_NAME " v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; + +MODULE_AUTHOR("Michael Chan <mchan@broadcom.com>"); +MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706 Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_MODULE_VERSION); + +static int disable_msi = 0; + +module_param(disable_msi, int, 0); +MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); + +typedef enum { + BCM5706 = 0, + NC370T, + NC370I, + BCM5706S, + NC370F, +} board_t; + +/* indexed by board_t, above */ +static struct { + char *name; +} board_info[] __devinitdata = { + { "Broadcom NetXtreme II BCM5706 1000Base-T" }, + { "HP NC370T Multifunction Gigabit Server Adapter" }, + { "HP NC370i Multifunction Gigabit Server Adapter" }, + { "Broadcom NetXtreme II BCM5706 1000Base-SX" }, + { "HP NC370F Multifunction Gigabit Server Adapter" }, + { 0 }, + }; + +static struct pci_device_id bnx2_pci_tbl[] = { + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706, + PCI_VENDOR_ID_HP, 0x3101, 0, 0, NC370T }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706, + PCI_VENDOR_ID_HP, 0x3106, 0, 0, NC370I }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5706 }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706S, + PCI_VENDOR_ID_HP, 0x3102, 0, 0, NC370F }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706S, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5706S }, + { 0, } +}; + +static struct flash_spec flash_table[] = +{ + /* Slow EEPROM */ + {0x00000000, 0x40030380, 0x009f0081, 0xa184a053, 0xaf000400, + 1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE, + SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE, + "EEPROM - slow"}, + /* Fast EEPROM */ + {0x02000000, 0x62008380, 0x009f0081, 0xa184a053, 0xaf000400, + 1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE, + SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE, + "EEPROM - fast"}, + /* ATMEL AT45DB011B (buffered flash) */ + {0x02000003, 0x6e008173, 0x00570081, 0x68848353, 0xaf000400, + 1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE, + BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE, + "Buffered flash"}, + /* Saifun SA25F005 (non-buffered flash) */ + /* strap, cfg1, & write1 need updates */ + {0x01000003, 0x5f008081, 0x00050081, 0x03840253, 0xaf020406, + 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, + SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE, + "Non-buffered flash (64kB)"}, + /* Saifun SA25F010 (non-buffered flash) */ + /* strap, cfg1, & write1 need updates */ + {0x00000001, 0x47008081, 0x00050081, 0x03840253, 0xaf020406, + 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, + SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*2, + "Non-buffered flash (128kB)"}, + /* Saifun SA25F020 (non-buffered flash) */ + /* strap, cfg1, & write1 need updates */ + {0x00000003, 0x4f008081, 0x00050081, 0x03840253, 0xaf020406, + 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, + SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*4, + "Non-buffered flash (256kB)"}, +}; + +MODULE_DEVICE_TABLE(pci, bnx2_pci_tbl); + +static u32 +bnx2_reg_rd_ind(struct bnx2 *bp, u32 offset) +{ + REG_WR(bp, BNX2_PCICFG_REG_WINDOW_ADDRESS, offset); + return (REG_RD(bp, BNX2_PCICFG_REG_WINDOW)); +} + +static void +bnx2_reg_wr_ind(struct bnx2 *bp, u32 offset, u32 val) +{ + REG_WR(bp, BNX2_PCICFG_REG_WINDOW_ADDRESS, offset); + REG_WR(bp, BNX2_PCICFG_REG_WINDOW, val); +} + +static void +bnx2_ctx_wr(struct bnx2 *bp, u32 cid_addr, u32 offset, u32 val) +{ + offset += cid_addr; + REG_WR(bp, BNX2_CTX_DATA_ADR, offset); + REG_WR(bp, BNX2_CTX_DATA, val); +} + +static int +bnx2_read_phy(struct bnx2 *bp, u32 reg, u32 *val) +{ + u32 val1; + int i, ret; + + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { + val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); + val1 &= ~BNX2_EMAC_MDIO_MODE_AUTO_POLL; + + REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); + REG_RD(bp, BNX2_EMAC_MDIO_MODE); + + udelay(40); + } + + val1 = (bp->phy_addr << 21) | (reg << 16) | + BNX2_EMAC_MDIO_COMM_COMMAND_READ | BNX2_EMAC_MDIO_COMM_DISEXT | + BNX2_EMAC_MDIO_COMM_START_BUSY; + REG_WR(bp, BNX2_EMAC_MDIO_COMM, val1); + + for (i = 0; i < 50; i++) { + udelay(10); + + val1 = REG_RD(bp, BNX2_EMAC_MDIO_COMM); + if (!(val1 & BNX2_EMAC_MDIO_COMM_START_BUSY)) { + udelay(5); + + val1 = REG_RD(bp, BNX2_EMAC_MDIO_COMM); + val1 &= BNX2_EMAC_MDIO_COMM_DATA; + + break; + } + } + + if (val1 & BNX2_EMAC_MDIO_COMM_START_BUSY) { + *val = 0x0; + ret = -EBUSY; + } + else { + *val = val1; + ret = 0; + } + + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { + val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); + val1 |= BNX2_EMAC_MDIO_MODE_AUTO_POLL; + + REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); + REG_RD(bp, BNX2_EMAC_MDIO_MODE); + + udelay(40); + } + + return ret; +} + +static int +bnx2_write_phy(struct bnx2 *bp, u32 reg, u32 val) +{ + u32 val1; + int i, ret; + + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { + val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); + val1 &= ~BNX2_EMAC_MDIO_MODE_AUTO_POLL; + + REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); + REG_RD(bp, BNX2_EMAC_MDIO_MODE); + + udelay(40); + } + + val1 = (bp->phy_addr << 21) | (reg << 16) | val | + BNX2_EMAC_MDIO_COMM_COMMAND_WRITE | + BNX2_EMAC_MDIO_COMM_START_BUSY | BNX2_EMAC_MDIO_COMM_DISEXT; + REG_WR(bp, BNX2_EMAC_MDIO_COMM, val1); + + for (i = 0; i < 50; i++) { + udelay(10); + + val1 = REG_RD(bp, BNX2_EMAC_MDIO_COMM); + if (!(val1 & BNX2_EMAC_MDIO_COMM_START_BUSY)) { + udelay(5); + break; + } + } + + if (val1 & BNX2_EMAC_MDIO_COMM_START_BUSY) + ret = -EBUSY; + else + ret = 0; + + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { + val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); + val1 |= BNX2_EMAC_MDIO_MODE_AUTO_POLL; + + REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); + REG_RD(bp, BNX2_EMAC_MDIO_MODE); + + udelay(40); + } + + return ret; +} + +static void +bnx2_disable_int(struct bnx2 *bp) +{ + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, + BNX2_PCICFG_INT_ACK_CMD_MASK_INT); + REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD); +} + +static void +bnx2_enable_int(struct bnx2 *bp) +{ + u32 val; + + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, + BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | bp->last_status_idx); + + val = REG_RD(bp, BNX2_HC_COMMAND); + REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW); +} + +static void +bnx2_disable_int_sync(struct bnx2 *bp) +{ + atomic_inc(&bp->intr_sem); + bnx2_disable_int(bp); + synchronize_irq(bp->pdev->irq); +} + +static void +bnx2_netif_stop(struct bnx2 *bp) +{ + bnx2_disable_int_sync(bp); + if (netif_running(bp->dev)) { + netif_poll_disable(bp->dev); + netif_tx_disable(bp->dev); + bp->dev->trans_start = jiffies; /* prevent tx timeout */ + } +} + +static void +bnx2_netif_start(struct bnx2 *bp) +{ + if (atomic_dec_and_test(&bp->intr_sem)) { + if (netif_running(bp->dev)) { + netif_wake_queue(bp->dev); + netif_poll_enable(bp->dev); + bnx2_enable_int(bp); + } + } +} + +static void +bnx2_free_mem(struct bnx2 *bp) +{ + if (bp->stats_blk) { + pci_free_consistent(bp->pdev, sizeof(struct statistics_block), + bp->stats_blk, bp->stats_blk_mapping); + bp->stats_blk = NULL; + } + if (bp->status_blk) { + pci_free_consistent(bp->pdev, sizeof(struct status_block), + bp->status_blk, bp->status_blk_mapping); + bp->status_blk = NULL; + } + if (bp->tx_desc_ring) { + pci_free_consistent(bp->pdev, + sizeof(struct tx_bd) * TX_DESC_CNT, + bp->tx_desc_ring, bp->tx_desc_mapping); + bp->tx_desc_ring = NULL; + } + if (bp->tx_buf_ring) { + kfree(bp->tx_buf_ring); + bp->tx_buf_ring = NULL; + } + if (bp->rx_desc_ring) { + pci_free_consistent(bp->pdev, + sizeof(struct rx_bd) * RX_DESC_CNT, + bp->rx_desc_ring, bp->rx_desc_mapping); + bp->rx_desc_ring = NULL; + } + if (bp->rx_buf_ring) { + kfree(bp->rx_buf_ring); + bp->rx_buf_ring = NULL; + } +} + +static int +bnx2_alloc_mem(struct bnx2 *bp) +{ + bp->tx_buf_ring = kmalloc(sizeof(struct sw_bd) * TX_DESC_CNT, + GFP_KERNEL); + if (bp->tx_buf_ring == NULL) + return -ENOMEM; + + memset(bp->tx_buf_ring, 0, sizeof(struct sw_bd) * TX_DESC_CNT); + bp->tx_desc_ring = pci_alloc_consistent(bp->pdev, + sizeof(struct tx_bd) * + TX_DESC_CNT, + &bp->tx_desc_mapping); + if (bp->tx_desc_ring == NULL) + goto alloc_mem_err; + + bp->rx_buf_ring = kmalloc(sizeof(struct sw_bd) * RX_DESC_CNT, + GFP_KERNEL); + if (bp->rx_buf_ring == NULL) + goto alloc_mem_err; + + memset(bp->rx_buf_ring, 0, sizeof(struct sw_bd) * RX_DESC_CNT); + bp->rx_desc_ring = pci_alloc_consistent(bp->pdev, + sizeof(struct rx_bd) * + RX_DESC_CNT, + &bp->rx_desc_mapping); + if (bp->rx_desc_ring == NULL) + goto alloc_mem_err; + + bp->status_blk = pci_alloc_consistent(bp->pdev, + sizeof(struct status_block), + &bp->status_blk_mapping); + if (bp->status_blk == NULL) + goto alloc_mem_err; + + memset(bp->status_blk, 0, sizeof(struct status_block)); + + bp->stats_blk = pci_alloc_consistent(bp->pdev, + sizeof(struct statistics_block), + &bp->stats_blk_mapping); + if (bp->stats_blk == NULL) + goto alloc_mem_err; + + memset(bp->stats_blk, 0, sizeof(struct statistics_block)); + + return 0; + +alloc_mem_err: + bnx2_free_mem(bp); + return -ENOMEM; +} + +static void +bnx2_report_link(struct bnx2 *bp) +{ + if (bp->link_up) { + netif_carrier_on(bp->dev); + printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name); + + printk("%d Mbps ", bp->line_speed); + + if (bp->duplex == DUPLEX_FULL) + printk("full duplex"); + else + printk("half duplex"); + + if (bp->flow_ctrl) { + if (bp->flow_ctrl & FLOW_CTRL_RX) { + printk(", receive "); + if (bp->flow_ctrl & FLOW_CTRL_TX) + printk("& transmit "); + } + else { + printk(", transmit "); + } + printk("flow control ON"); + } + printk("\n"); + } + else { + netif_carrier_off(bp->dev); + printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name); + } +} + +static void +bnx2_resolve_flow_ctrl(struct bnx2 *bp) +{ + u32 local_adv, remote_adv; + + bp->flow_ctrl = 0; + if ((bp->autoneg & (AUTONEG_SPEED | AUTONEG_FLOW_CTRL)) != + (AUTONEG_SPEED | AUTONEG_FLOW_CTRL)) { + + if (bp->duplex == DUPLEX_FULL) { + bp->flow_ctrl = bp->req_flow_ctrl; + } + return; + } + + if (bp->duplex != DUPLEX_FULL) { + return; + } + + bnx2_read_phy(bp, MII_ADVERTISE, &local_adv); + bnx2_read_phy(bp, MII_LPA, &remote_adv); + + if (bp->phy_flags & PHY_SERDES_FLAG) { + u32 new_local_adv = 0; + u32 new_remote_adv = 0; + + if (local_adv & ADVERTISE_1000XPAUSE) + new_local_adv |= ADVERTISE_PAUSE_CAP; + if (local_adv & ADVERTISE_1000XPSE_ASYM) + new_local_adv |= ADVERTISE_PAUSE_ASYM; + if (remote_adv & ADVERTISE_1000XPAUSE) + new_remote_adv |= ADVERTISE_PAUSE_CAP; + if (remote_adv & ADVERTISE_1000XPSE_ASYM) + new_remote_adv |= ADVERTISE_PAUSE_ASYM; + + local_adv = new_local_adv; + remote_adv = new_remote_adv; + } + + /* See Table 28B-3 of 802.3ab-1999 spec. */ + if (local_adv & ADVERTISE_PAUSE_CAP) { + if(local_adv & ADVERTISE_PAUSE_ASYM) { + if (remote_adv & ADVERTISE_PAUSE_CAP) { + bp->flow_ctrl = FLOW_CTRL_TX | FLOW_CTRL_RX; + } + else if (remote_adv & ADVERTISE_PAUSE_ASYM) { + bp->flow_ctrl = FLOW_CTRL_RX; + } + } + else { + if (remote_adv & ADVERTISE_PAUSE_CAP) { + bp->flow_ctrl = FLOW_CTRL_TX | FLOW_CTRL_RX; + } + } + } + else if (local_adv & ADVERTISE_PAUSE_ASYM) { + if ((remote_adv & ADVERTISE_PAUSE_CAP) && + (remote_adv & ADVERTISE_PAUSE_ASYM)) { + + bp->flow_ctrl = FLOW_CTRL_TX; + } + } +} + +static int +bnx2_serdes_linkup(struct bnx2 *bp) +{ + u32 bmcr, local_adv, remote_adv, common; + + bp->link_up = 1; + bp->line_speed = SPEED_1000; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + if (bmcr & BMCR_FULLDPLX) { + bp->duplex = DUPLEX_FULL; + } + else { + bp->duplex = DUPLEX_HALF; + } + + if (!(bmcr & BMCR_ANENABLE)) { + return 0; + } + + bnx2_read_phy(bp, MII_ADVERTISE, &local_adv); + bnx2_read_phy(bp, MII_LPA, &remote_adv); + + common = local_adv & remote_adv; + if (common & (ADVERTISE_1000XHALF | ADVERTISE_1000XFULL)) { + + if (common & ADVERTISE_1000XFULL) { + bp->duplex = DUPLEX_FULL; + } + else { + bp->duplex = DUPLEX_HALF; + } + } + + return 0; +} + +static int +bnx2_copper_linkup(struct bnx2 *bp) +{ + u32 bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + if (bmcr & BMCR_ANENABLE) { + u32 local_adv, remote_adv, common; + + bnx2_read_phy(bp, MII_CTRL1000, &local_adv); + bnx2_read_phy(bp, MII_STAT1000, &remote_adv); + + common = local_adv & (remote_adv >> 2); + if (common & ADVERTISE_1000FULL) { + bp->line_speed = SPEED_1000; + bp->duplex = DUPLEX_FULL; + } + else if (common & ADVERTISE_1000HALF) { + bp->line_speed = SPEED_1000; + bp->duplex = DUPLEX_HALF; + } + else { + bnx2_read_phy(bp, MII_ADVERTISE, &local_adv); + bnx2_read_phy(bp, MII_LPA, &remote_adv); + + common = local_adv & remote_adv; + if (common & ADVERTISE_100FULL) { + bp->line_speed = SPEED_100; + bp->duplex = DUPLEX_FULL; + } + else if (common & ADVERTISE_100HALF) { + bp->line_speed = SPEED_100; + bp->duplex = DUPLEX_HALF; + } + else if (common & ADVERTISE_10FULL) { + bp->line_speed = SPEED_10; + bp->duplex = DUPLEX_FULL; + } + else if (common & ADVERTISE_10HALF) { + bp->line_speed = SPEED_10; + bp->duplex = DUPLEX_HALF; + } + else { + bp->line_speed = 0; + bp->link_up = 0; + } + } + } + else { + if (bmcr & BMCR_SPEED100) { + bp->line_speed = SPEED_100; + } + else { + bp->line_speed = SPEED_10; + } + if (bmcr & BMCR_FULLDPLX) { + bp->duplex = DUPLEX_FULL; + } + else { + bp->duplex = DUPLEX_HALF; + } + } + + return 0; +} + +static int +bnx2_set_mac_link(struct bnx2 *bp) +{ + u32 val; + + REG_WR(bp, BNX2_EMAC_TX_LENGTHS, 0x2620); + if (bp->link_up && (bp->line_speed == SPEED_1000) && + (bp->duplex == DUPLEX_HALF)) { + REG_WR(bp, BNX2_EMAC_TX_LENGTHS, 0x26ff); + } + + /* Configure the EMAC mode register. */ + val = REG_RD(bp, BNX2_EMAC_MODE); + + val &= ~(BNX2_EMAC_MODE_PORT | BNX2_EMAC_MODE_HALF_DUPLEX | + BNX2_EMAC_MODE_MAC_LOOP | BNX2_EMAC_MODE_FORCE_LINK); + + if (bp->link_up) { + if (bp->line_speed != SPEED_1000) + val |= BNX2_EMAC_MODE_PORT_MII; + else + val |= BNX2_EMAC_MODE_PORT_GMII; + } + else { + val |= BNX2_EMAC_MODE_PORT_GMII; + } + + /* Set the MAC to operate in the appropriate duplex mode. */ + if (bp->duplex == DUPLEX_HALF) + val |= BNX2_EMAC_MODE_HALF_DUPLEX; + REG_WR(bp, BNX2_EMAC_MODE, val); + + /* Enable/disable rx PAUSE. */ + bp->rx_mode &= ~BNX2_EMAC_RX_MODE_FLOW_EN; + + if (bp->flow_ctrl & FLOW_CTRL_RX) + bp->rx_mode |= BNX2_EMAC_RX_MODE_FLOW_EN; + REG_WR(bp, BNX2_EMAC_RX_MODE, bp->rx_mode); + + /* Enable/disable tx PAUSE. */ + val = REG_RD(bp, BNX2_EMAC_TX_MODE); + val &= ~BNX2_EMAC_TX_MODE_FLOW_EN; + + if (bp->flow_ctrl & FLOW_CTRL_TX) + val |= BNX2_EMAC_TX_MODE_FLOW_EN; + REG_WR(bp, BNX2_EMAC_TX_MODE, val); + + /* Acknowledge the interrupt. */ + REG_WR(bp, BNX2_EMAC_STATUS, BNX2_EMAC_STATUS_LINK_CHANGE); + + return 0; +} + +static int +bnx2_set_link(struct bnx2 *bp) +{ + u32 bmsr; + u8 link_up; + + if (bp->loopback == MAC_LOOPBACK) { + bp->link_up = 1; + return 0; + } + + link_up = bp->link_up; + + bnx2_read_phy(bp, MII_BMSR, &bmsr); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + + if ((bp->phy_flags & PHY_SERDES_FLAG) && + (CHIP_NUM(bp) == CHIP_NUM_5706)) { + u32 val; + + val = REG_RD(bp, BNX2_EMAC_STATUS); + if (val & BNX2_EMAC_STATUS_LINK) + bmsr |= BMSR_LSTATUS; + else + bmsr &= ~BMSR_LSTATUS; + } + + if (bmsr & BMSR_LSTATUS) { + bp->link_up = 1; + + if (bp->phy_flags & PHY_SERDES_FLAG) { + bnx2_serdes_linkup(bp); + } + else { + bnx2_copper_linkup(bp); + } + bnx2_resolve_flow_ctrl(bp); + } + else { + if ((bp->phy_flags & PHY_SERDES_FLAG) && + (bp->autoneg & AUTONEG_SPEED)) { + + u32 bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + if (!(bmcr & BMCR_ANENABLE)) { + bnx2_write_phy(bp, MII_BMCR, bmcr | + BMCR_ANENABLE); + } + } + bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG; + bp->link_up = 0; + } + + if (bp->link_up != link_up) { + bnx2_report_link(bp); + } + + bnx2_set_mac_link(bp); + + return 0; +} + +static int +bnx2_reset_phy(struct bnx2 *bp) +{ + int i; + u32 reg; + + bnx2_write_phy(bp, MII_BMCR, BMCR_RESET); + +#define PHY_RESET_MAX_WAIT 100 + for (i = 0; i < PHY_RESET_MAX_WAIT; i++) { + udelay(10); + + bnx2_read_phy(bp, MII_BMCR, ®); + if (!(reg & BMCR_RESET)) { + udelay(20); + break; + } + } + if (i == PHY_RESET_MAX_WAIT) { + return -EBUSY; + } + return 0; +} + +static u32 +bnx2_phy_get_pause_adv(struct bnx2 *bp) +{ + u32 adv = 0; + + if ((bp->req_flow_ctrl & (FLOW_CTRL_RX | FLOW_CTRL_TX)) == + (FLOW_CTRL_RX | FLOW_CTRL_TX)) { + + if (bp->phy_flags & PHY_SERDES_FLAG) { + adv = ADVERTISE_1000XPAUSE; + } + else { + adv = ADVERTISE_PAUSE_CAP; + } + } + else if (bp->req_flow_ctrl & FLOW_CTRL_TX) { + if (bp->phy_flags & PHY_SERDES_FLAG) { + adv = ADVERTISE_1000XPSE_ASYM; + } + else { + adv = ADVERTISE_PAUSE_ASYM; + } + } + else if (bp->req_flow_ctrl & FLOW_CTRL_RX) { + if (bp->phy_flags & PHY_SERDES_FLAG) { + adv = ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM; + } + else { + adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; + } + } + return adv; +} + +static int +bnx2_setup_serdes_phy(struct bnx2 *bp) +{ + u32 adv, bmcr; + u32 new_adv = 0; + + if (!(bp->autoneg & AUTONEG_SPEED)) { + u32 new_bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + new_bmcr = bmcr & ~BMCR_ANENABLE; + new_bmcr |= BMCR_SPEED1000; + if (bp->req_duplex == DUPLEX_FULL) { + new_bmcr |= BMCR_FULLDPLX; + } + else { + new_bmcr &= ~BMCR_FULLDPLX; + } + if (new_bmcr != bmcr) { + /* Force a link down visible on the other side */ + if (bp->link_up) { + bnx2_read_phy(bp, MII_ADVERTISE, &adv); + adv &= ~(ADVERTISE_1000XFULL | + ADVERTISE_1000XHALF); + bnx2_write_phy(bp, MII_ADVERTISE, adv); + bnx2_write_phy(bp, MII_BMCR, bmcr | + BMCR_ANRESTART | BMCR_ANENABLE); + + bp->link_up = 0; + netif_carrier_off(bp->dev); + } + bnx2_write_phy(bp, MII_BMCR, new_bmcr); + } + return 0; + } + + if (bp->advertising & ADVERTISED_1000baseT_Full) + new_adv |= ADVERTISE_1000XFULL; + + new_adv |= bnx2_phy_get_pause_adv(bp); + + bnx2_read_phy(bp, MII_ADVERTISE, &adv); + bnx2_read_phy(bp, MII_BMCR, &bmcr); + + bp->serdes_an_pending = 0; + if ((adv != new_adv) || ((bmcr & BMCR_ANENABLE) == 0)) { + /* Force a link down visible on the other side */ + if (bp->link_up) { + int i; + + bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK); + for (i = 0; i < 110; i++) { + udelay(100); + } + } + + bnx2_write_phy(bp, MII_ADVERTISE, new_adv); + bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART | + BMCR_ANENABLE); + bp->serdes_an_pending = SERDES_AN_TIMEOUT / bp->timer_interval; + } + + return 0; +} + +#define ETHTOOL_ALL_FIBRE_SPEED \ + (ADVERTISED_1000baseT_Full) + +#define ETHTOOL_ALL_COPPER_SPEED \ + (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ + ADVERTISED_1000baseT_Full) + +#define PHY_ALL_10_100_SPEED (ADVERTISE_10HALF | ADVERTISE_10FULL | \ + ADVERTISE_100HALF | ADVERTISE_100FULL | ADVERTISE_CSMA) + +#define PHY_ALL_1000_SPEED (ADVERTISE_1000HALF | ADVERTISE_1000FULL) + +static int +bnx2_setup_copper_phy(struct bnx2 *bp) +{ + u32 bmcr; + u32 new_bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + + if (bp->autoneg & AUTONEG_SPEED) { + u32 adv_reg, adv1000_reg; + u32 new_adv_reg = 0; + u32 new_adv1000_reg = 0; + + bnx2_read_phy(bp, MII_ADVERTISE, &adv_reg); + adv_reg &= (PHY_ALL_10_100_SPEED | ADVERTISE_PAUSE_CAP | + ADVERTISE_PAUSE_ASYM); + + bnx2_read_phy(bp, MII_CTRL1000, &adv1000_reg); + adv1000_reg &= PHY_ALL_1000_SPEED; + + if (bp->advertising & ADVERTISED_10baseT_Half) + new_adv_reg |= ADVERTISE_10HALF; + if (bp->advertising & ADVERTISED_10baseT_Full) + new_adv_reg |= ADVERTISE_10FULL; + if (bp->advertising & ADVERTISED_100baseT_Half) + new_adv_reg |= ADVERTISE_100HALF; + if (bp->advertising & ADVERTISED_100baseT_Full) + new_adv_reg |= ADVERTISE_100FULL; + if (bp->advertising & ADVERTISED_1000baseT_Full) + new_adv1000_reg |= ADVERTISE_1000FULL; + + new_adv_reg |= ADVERTISE_CSMA; + + new_adv_reg |= bnx2_phy_get_pause_adv(bp); + + if ((adv1000_reg != new_adv1000_reg) || + (adv_reg != new_adv_reg) || + ((bmcr & BMCR_ANENABLE) == 0)) { + + bnx2_write_phy(bp, MII_ADVERTISE, new_adv_reg); + bnx2_write_phy(bp, MII_CTRL1000, new_adv1000_reg); + bnx2_write_phy(bp, MII_BMCR, BMCR_ANRESTART | + BMCR_ANENABLE); + } + else if (bp->link_up) { + /* Flow ctrl may have changed from auto to forced */ + /* or vice-versa. */ + + bnx2_resolve_flow_ctrl(bp); + bnx2_set_mac_link(bp); + } + return 0; + } + + new_bmcr = 0; + if (bp->req_line_speed == SPEED_100) { + new_bmcr |= BMCR_SPEED100; + } + if (bp->req_duplex == DUPLEX_FULL) { + new_bmcr |= BMCR_FULLDPLX; + } + if (new_bmcr != bmcr) { + u32 bmsr; + int i = 0; + + bnx2_read_phy(bp, MII_BMSR, &bmsr); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + + if (bmsr & BMSR_LSTATUS) { + /* Force link down */ + bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK); + do { + udelay(100); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + i++; + } while ((bmsr & BMSR_LSTATUS) && (i < 620)); + } + + bnx2_write_phy(bp, MII_BMCR, new_bmcr); + + /* Normally, the new speed is setup after the link has + * gone down and up again. In some cases, link will not go + * down so we need to set up the new speed here. + */ + if (bmsr & BMSR_LSTATUS) { + bp->line_speed = bp->req_line_speed; + bp->duplex = bp->req_duplex; + bnx2_resolve_flow_ctrl(bp); + bnx2_set_mac_link(bp); + } + } + return 0; +} + +static int +bnx2_setup_phy(struct bnx2 *bp) +{ + if (bp->loopback == MAC_LOOPBACK) + return 0; + + if (bp->phy_flags & PHY_SERDES_FLAG) { + return (bnx2_setup_serdes_phy(bp)); + } + else { + return (bnx2_setup_copper_phy(bp)); + } +} + +static int +bnx2_init_serdes_phy(struct bnx2 *bp) +{ + bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG; + + if (CHIP_NUM(bp) == CHIP_NUM_5706) { + REG_WR(bp, BNX2_MISC_UNUSED0, 0x300); + } + + if (bp->dev->mtu > 1500) { + u32 val; + + /* Set extended packet length bit */ + bnx2_write_phy(bp, 0x18, 0x7); + bnx2_read_phy(bp, 0x18, &val); + bnx2_write_phy(bp, 0x18, (val & 0xfff8) | 0x4000); + + bnx2_write_phy(bp, 0x1c, 0x6c00); + bnx2_read_phy(bp, 0x1c, &val); + bnx2_write_phy(bp, 0x1c, (val & 0x3ff) | 0xec02); + } + else { + u32 val; + + bnx2_write_phy(bp, 0x18, 0x7); + bnx2_read_phy(bp, 0x18, &val); + bnx2_write_phy(bp, 0x18, val & ~0x4007); + + bnx2_write_phy(bp, 0x1c, 0x6c00); + bnx2_read_phy(bp, 0x1c, &val); + bnx2_write_phy(bp, 0x1c, (val & 0x3fd) | 0xec00); + } + + return 0; +} + +static int +bnx2_init_copper_phy(struct bnx2 *bp) +{ + bp->phy_flags |= PHY_CRC_FIX_FLAG; + + if (bp->phy_flags & PHY_CRC_FIX_FLAG) { + bnx2_write_phy(bp, 0x18, 0x0c00); + bnx2_write_phy(bp, 0x17, 0x000a); + bnx2_write_phy(bp, 0x15, 0x310b); + bnx2_write_phy(bp, 0x17, 0x201f); + bnx2_write_phy(bp, 0x15, 0x9506); + bnx2_write_phy(bp, 0x17, 0x401f); + bnx2_write_phy(bp, 0x15, 0x14e2); + bnx2_write_phy(bp, 0x18, 0x0400); + } + + if (bp->dev->mtu > 1500) { + u32 val; + + /* Set extended packet length bit */ + bnx2_write_phy(bp, 0x18, 0x7); + bnx2_read_phy(bp, 0x18, &val); + bnx2_write_phy(bp, 0x18, val | 0x4000); + + bnx2_read_phy(bp, 0x10, &val); + bnx2_write_phy(bp, 0x10, val | 0x1); + } + else { + u32 val; + + bnx2_write_phy(bp, 0x18, 0x7); + bnx2_read_phy(bp, 0x18, &val); + bnx2_write_phy(bp, 0x18, val & ~0x4007); + + bnx2_read_phy(bp, 0x10, &val); + bnx2_write_phy(bp, 0x10, val & ~0x1); + } + + return 0; +} + + +static int +bnx2_init_phy(struct bnx2 *bp) +{ + u32 val; + int rc = 0; + + bp->phy_flags &= ~PHY_INT_MODE_MASK_FLAG; + bp->phy_flags |= PHY_INT_MODE_LINK_READY_FLAG; + + REG_WR(bp, BNX2_EMAC_ATTENTION_ENA, BNX2_EMAC_ATTENTION_ENA_LINK); + + bnx2_reset_phy(bp); + + bnx2_read_phy(bp, MII_PHYSID1, &val); + bp->phy_id = val << 16; + bnx2_read_phy(bp, MII_PHYSID2, &val); + bp->phy_id |= val & 0xffff; + + if (bp->phy_flags & PHY_SERDES_FLAG) { + rc = bnx2_init_serdes_phy(bp); + } + else { + rc = bnx2_init_copper_phy(bp); + } + + bnx2_setup_phy(bp); + + return rc; +} + +static int +bnx2_set_mac_loopback(struct bnx2 *bp) +{ + u32 mac_mode; + + mac_mode = REG_RD(bp, BNX2_EMAC_MODE); + mac_mode &= ~BNX2_EMAC_MODE_PORT; + mac_mode |= BNX2_EMAC_MODE_MAC_LOOP | BNX2_EMAC_MODE_FORCE_LINK; + REG_WR(bp, BNX2_EMAC_MODE, mac_mode); + bp->link_up = 1; + return 0; +} + +static int +bnx2_fw_sync(struct bnx2 *bp, u32 msg_data) +{ + int i; + u32 val; + + if (bp->fw_timed_out) + return -EBUSY; + + bp->fw_wr_seq++; + msg_data |= bp->fw_wr_seq; + + REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_MB, msg_data); + + /* wait for an acknowledgement. */ + for (i = 0; i < (FW_ACK_TIME_OUT_MS * 1000)/5; i++) { + udelay(5); + + val = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_FW_MB); + + if ((val & BNX2_FW_MSG_ACK) == (msg_data & BNX2_DRV_MSG_SEQ)) + break; + } + + /* If we timed out, inform the firmware that this is the case. */ + if (((val & BNX2_FW_MSG_ACK) != (msg_data & BNX2_DRV_MSG_SEQ)) && + ((msg_data & BNX2_DRV_MSG_DATA) != BNX2_DRV_MSG_DATA_WAIT0)) { + + msg_data &= ~BNX2_DRV_MSG_CODE; + msg_data |= BNX2_DRV_MSG_CODE_FW_TIMEOUT; + + REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_MB, msg_data); + + bp->fw_timed_out = 1; + + return -EBUSY; + } + + return 0; +} + +static void +bnx2_init_context(struct bnx2 *bp) +{ + u32 vcid; + + vcid = 96; + while (vcid) { + u32 vcid_addr, pcid_addr, offset; + + vcid--; + + if (CHIP_ID(bp) == CHIP_ID_5706_A0) { + u32 new_vcid; + + vcid_addr = GET_PCID_ADDR(vcid); + if (vcid & 0x8) { + new_vcid = 0x60 + (vcid & 0xf0) + (vcid & 0x7); + } + else { + new_vcid = vcid; + } + pcid_addr = GET_PCID_ADDR(new_vcid); + } + else { + vcid_addr = GET_CID_ADDR(vcid); + pcid_addr = vcid_addr; + } + + REG_WR(bp, BNX2_CTX_VIRT_ADDR, 0x00); + REG_WR(bp, BNX2_CTX_PAGE_TBL, pcid_addr); + + /* Zero out the context. */ + for (offset = 0; offset < PHY_CTX_SIZE; offset += 4) { + CTX_WR(bp, 0x00, offset, 0); + } + + REG_WR(bp, BNX2_CTX_VIRT_ADDR, vcid_addr); + REG_WR(bp, BNX2_CTX_PAGE_TBL, pcid_addr); + } +} + +static int +bnx2_alloc_bad_rbuf(struct bnx2 *bp) +{ + u16 *good_mbuf; + u32 good_mbuf_cnt; + u32 val; + + good_mbuf = kmalloc(512 * sizeof(u16), GFP_KERNEL); + if (good_mbuf == NULL) { + printk(KERN_ERR PFX "Failed to allocate memory in " + "bnx2_alloc_bad_rbuf\n"); + return -ENOMEM; + } + + REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, + BNX2_MISC_ENABLE_SET_BITS_RX_MBUF_ENABLE); + + good_mbuf_cnt = 0; + + /* Allocate a bunch of mbufs and save the good ones in an array. */ + val = REG_RD_IND(bp, BNX2_RBUF_STATUS1); + while (val & BNX2_RBUF_STATUS1_FREE_COUNT) { + REG_WR_IND(bp, BNX2_RBUF_COMMAND, BNX2_RBUF_COMMAND_ALLOC_REQ); + + val = REG_RD_IND(bp, BNX2_RBUF_FW_BUF_ALLOC); + + val &= BNX2_RBUF_FW_BUF_ALLOC_VALUE; + + /* The addresses with Bit 9 set are bad memory blocks. */ + if (!(val & (1 << 9))) { + good_mbuf[good_mbuf_cnt] = (u16) val; + good_mbuf_cnt++; + } + + val = REG_RD_IND(bp, BNX2_RBUF_STATUS1); + } + + /* Free the good ones back to the mbuf pool thus discarding + * all the bad ones. */ + while (good_mbuf_cnt) { + good_mbuf_cnt--; + + val = good_mbuf[good_mbuf_cnt]; + val = (val << 9) | val | 1; + + REG_WR_IND(bp, BNX2_RBUF_FW_BUF_FREE, val); + } + kfree(good_mbuf); + return 0; +} + +static void +bnx2_set_mac_addr(struct bnx2 *bp) +{ + u32 val; + u8 *mac_addr = bp->dev->dev_addr; + + val = (mac_addr[0] << 8) | mac_addr[1]; + + REG_WR(bp, BNX2_EMAC_MAC_MATCH0, val); + + val = (mac_addr[2] << 24) | (mac_addr[3] << 16) | + (mac_addr[4] << 8) | mac_addr[5]; + + REG_WR(bp, BNX2_EMAC_MAC_MATCH1, val); +} + +static inline int +bnx2_alloc_rx_skb(struct bnx2 *bp, u16 index) +{ + struct sk_buff *skb; + struct sw_bd *rx_buf = &bp->rx_buf_ring[index]; + dma_addr_t mapping; + struct rx_bd *rxbd = &bp->rx_desc_ring[index]; + unsigned long align; + + skb = dev_alloc_skb(bp->rx_buf_size); + if (skb == NULL) { + return -ENOMEM; + } + + if (unlikely((align = (unsigned long) skb->data & 0x7))) { + skb_reserve(skb, 8 - align); + } + + skb->dev = bp->dev; + mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size, + PCI_DMA_FROMDEVICE); + + rx_buf->skb = skb; + pci_unmap_addr_set(rx_buf, mapping, mapping); + + rxbd->rx_bd_haddr_hi = (u64) mapping >> 32; + rxbd->rx_bd_haddr_lo = (u64) mapping & 0xffffffff; + + bp->rx_prod_bseq += bp->rx_buf_use_size; + + return 0; +} + +static void +bnx2_phy_int(struct bnx2 *bp) +{ + u32 new_link_state, old_link_state; + + new_link_state = bp->status_blk->status_attn_bits & + STATUS_ATTN_BITS_LINK_STATE; + old_link_state = bp->status_blk->status_attn_bits_ack & + STATUS_ATTN_BITS_LINK_STATE; + if (new_link_state != old_link_state) { + if (new_link_state) { + REG_WR(bp, BNX2_PCICFG_STATUS_BIT_SET_CMD, + STATUS_ATTN_BITS_LINK_STATE); + } + else { + REG_WR(bp, BNX2_PCICFG_STATUS_BIT_CLEAR_CMD, + STATUS_ATTN_BITS_LINK_STATE); + } + bnx2_set_link(bp); + } +} + +static void +bnx2_tx_int(struct bnx2 *bp) +{ + u16 hw_cons, sw_cons, sw_ring_cons; + int tx_free_bd = 0; + + hw_cons = bp->status_blk->status_tx_quick_consumer_index0; + if ((hw_cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT) { + hw_cons++; + } + sw_cons = bp->tx_cons; + + while (sw_cons != hw_cons) { + struct sw_bd *tx_buf; + struct sk_buff *skb; + int i, last; + + sw_ring_cons = TX_RING_IDX(sw_cons); + + tx_buf = &bp->tx_buf_ring[sw_ring_cons]; + skb = tx_buf->skb; +#ifdef BCM_TSO + /* partial BD completions possible with TSO packets */ + if (skb_shinfo(skb)->tso_size) { + u16 last_idx, last_ring_idx; + + last_idx = sw_cons + + skb_shinfo(skb)->nr_frags + 1; + last_ring_idx = sw_ring_cons + + skb_shinfo(skb)->nr_frags + 1; + if (unlikely(last_ring_idx >= MAX_TX_DESC_CNT)) { + last_idx++; + } + if (((s16) ((s16) last_idx - (s16) hw_cons)) > 0) { + break; + } + } +#endif + pci_unmap_single(bp->pdev, pci_unmap_addr(tx_buf, mapping), + skb_headlen(skb), PCI_DMA_TODEVICE); + + tx_buf->skb = NULL; + last = skb_shinfo(skb)->nr_frags; + + for (i = 0; i < last; i++) { + sw_cons = NEXT_TX_BD(sw_cons); + + pci_unmap_page(bp->pdev, + pci_unmap_addr( + &bp->tx_buf_ring[TX_RING_IDX(sw_cons)], + mapping), + skb_shinfo(skb)->frags[i].size, + PCI_DMA_TODEVICE); + } + + sw_cons = NEXT_TX_BD(sw_cons); + + tx_free_bd += last + 1; + + dev_kfree_skb_irq(skb); + + hw_cons = bp->status_blk->status_tx_quick_consumer_index0; + if ((hw_cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT) { + hw_cons++; + } + } + + atomic_add(tx_free_bd, &bp->tx_avail_bd); + + if (unlikely(netif_queue_stopped(bp->dev))) { + unsigned long flags; + + spin_lock_irqsave(&bp->tx_lock, flags); + if ((netif_queue_stopped(bp->dev)) && + (atomic_read(&bp->tx_avail_bd) > MAX_SKB_FRAGS)) { + + netif_wake_queue(bp->dev); + } + spin_unlock_irqrestore(&bp->tx_lock, flags); + } + + bp->tx_cons = sw_cons; + +} + +static inline void +bnx2_reuse_rx_skb(struct bnx2 *bp, struct sk_buff *skb, + u16 cons, u16 prod) +{ + struct sw_bd *cons_rx_buf = &bp->rx_buf_ring[cons]; + struct sw_bd *prod_rx_buf = &bp->rx_buf_ring[prod]; + struct rx_bd *cons_bd = &bp->rx_desc_ring[cons]; + struct rx_bd *prod_bd = &bp->rx_desc_ring[prod]; + + pci_dma_sync_single_for_device(bp->pdev, + pci_unmap_addr(cons_rx_buf, mapping), + bp->rx_offset + RX_COPY_THRESH, PCI_DMA_FROMDEVICE); + + prod_rx_buf->skb = cons_rx_buf->skb; + pci_unmap_addr_set(prod_rx_buf, mapping, + pci_unmap_addr(cons_rx_buf, mapping)); + + memcpy(prod_bd, cons_bd, 8); + + bp->rx_prod_bseq += bp->rx_buf_use_size; + +} + +static int +bnx2_rx_int(struct bnx2 *bp, int budget) +{ + u16 hw_cons, sw_cons, sw_ring_cons, sw_prod, sw_ring_prod; + struct l2_fhdr *rx_hdr; + int rx_pkt = 0; + + hw_cons = bp->status_blk->status_rx_quick_consumer_index0; + if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT) { + hw_cons++; + } + sw_cons = bp->rx_cons; + sw_prod = bp->rx_prod; + + /* Memory barrier necessary as speculative reads of the rx + * buffer can be ahead of the index in the status block + */ + rmb(); + while (sw_cons != hw_cons) { + unsigned int len; + u16 status; + struct sw_bd *rx_buf; + struct sk_buff *skb; + + sw_ring_cons = RX_RING_IDX(sw_cons); + sw_ring_prod = RX_RING_IDX(sw_prod); + + rx_buf = &bp->rx_buf_ring[sw_ring_cons]; + skb = rx_buf->skb; + pci_dma_sync_single_for_cpu(bp->pdev, + pci_unmap_addr(rx_buf, mapping), + bp->rx_offset + RX_COPY_THRESH, PCI_DMA_FROMDEVICE); + + rx_hdr = (struct l2_fhdr *) skb->data; + len = rx_hdr->l2_fhdr_pkt_len - 4; + + if (rx_hdr->l2_fhdr_errors & + (L2_FHDR_ERRORS_BAD_CRC | + L2_FHDR_ERRORS_PHY_DECODE | + L2_FHDR_ERRORS_ALIGNMENT | + L2_FHDR_ERRORS_TOO_SHORT | + L2_FHDR_ERRORS_GIANT_FRAME)) { + + goto reuse_rx; + } + + /* Since we don't have a jumbo ring, copy small packets + * if mtu > 1500 + */ + if ((bp->dev->mtu > 1500) && (len <= RX_COPY_THRESH)) { + struct sk_buff *new_skb; + + new_skb = dev_alloc_skb(len + 2); + if (new_skb == NULL) + goto reuse_rx; + + /* aligned copy */ + memcpy(new_skb->data, + skb->data + bp->rx_offset - 2, + len + 2); + + skb_reserve(new_skb, 2); + skb_put(new_skb, len); + new_skb->dev = bp->dev; + + bnx2_reuse_rx_skb(bp, skb, + sw_ring_cons, sw_ring_prod); + + skb = new_skb; + } + else if (bnx2_alloc_rx_skb(bp, sw_ring_prod) == 0) { + pci_unmap_single(bp->pdev, + pci_unmap_addr(rx_buf, mapping), + bp->rx_buf_use_size, PCI_DMA_FROMDEVICE); + + skb_reserve(skb, bp->rx_offset); + skb_put(skb, len); + } + else { +reuse_rx: + bnx2_reuse_rx_skb(bp, skb, + sw_ring_cons, sw_ring_prod); + goto next_rx; + } + + skb->protocol = eth_type_trans(skb, bp->dev); + + if ((len > (bp->dev->mtu + ETH_HLEN)) && + (htons(skb->protocol) != 0x8100)) { + + dev_kfree_skb_irq(skb); + goto next_rx; + + } + + status = rx_hdr->l2_fhdr_status; + skb->ip_summed = CHECKSUM_NONE; + if (bp->rx_csum && + (status & (L2_FHDR_STATUS_TCP_SEGMENT | + L2_FHDR_STATUS_UDP_DATAGRAM))) { + + u16 cksum = rx_hdr->l2_fhdr_tcp_udp_xsum; + + if (cksum == 0xffff) + skb->ip_summed = CHECKSUM_UNNECESSARY; + } + +#ifdef BCM_VLAN + if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) && (bp->vlgrp != 0)) { + vlan_hwaccel_receive_skb(skb, bp->vlgrp, + rx_hdr->l2_fhdr_vlan_tag); + } + else +#endif + netif_receive_skb(skb); + + bp->dev->last_rx = jiffies; + rx_pkt++; + +next_rx: + rx_buf->skb = NULL; + + sw_cons = NEXT_RX_BD(sw_cons); + sw_prod = NEXT_RX_BD(sw_prod); + + if ((rx_pkt == budget)) + break; + } + bp->rx_cons = sw_cons; + bp->rx_prod = sw_prod; + + REG_WR16(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BDIDX, sw_prod); + + REG_WR(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BSEQ, bp->rx_prod_bseq); + + mmiowb(); + + return rx_pkt; + +} + +/* MSI ISR - The only difference between this and the INTx ISR + * is that the MSI interrupt is always serviced. + */ +static irqreturn_t +bnx2_msi(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct net_device *dev = dev_instance; + struct bnx2 *bp = dev->priv; + + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, + BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM | + BNX2_PCICFG_INT_ACK_CMD_MASK_INT); + + /* Return here if interrupt is disabled. */ + if (unlikely(atomic_read(&bp->intr_sem) != 0)) { + return IRQ_RETVAL(1); + } + + if (netif_rx_schedule_prep(dev)) { + __netif_rx_schedule(dev); + } + + return IRQ_RETVAL(1); +} + +static irqreturn_t +bnx2_interrupt(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct net_device *dev = dev_instance; + struct bnx2 *bp = dev->priv; + + /* When using INTx, it is possible for the interrupt to arrive + * at the CPU before the status block posted prior to the + * interrupt. Reading a register will flush the status block. + * When using MSI, the MSI message will always complete after + * the status block write. + */ + if ((bp->status_blk->status_idx == bp->last_status_idx) || + (REG_RD(bp, BNX2_PCICFG_MISC_STATUS) & + BNX2_PCICFG_MISC_STATUS_INTA_VALUE)) + return IRQ_RETVAL(0); + + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, + BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM | + BNX2_PCICFG_INT_ACK_CMD_MASK_INT); + + /* Return here if interrupt is shared and is disabled. */ + if (unlikely(atomic_read(&bp->intr_sem) != 0)) { + return IRQ_RETVAL(1); + } + + if (netif_rx_schedule_prep(dev)) { + __netif_rx_schedule(dev); + } + + return IRQ_RETVAL(1); +} + +static int +bnx2_poll(struct net_device *dev, int *budget) +{ + struct bnx2 *bp = dev->priv; + int rx_done = 1; + + bp->last_status_idx = bp->status_blk->status_idx; + + rmb(); + if ((bp->status_blk->status_attn_bits & + STATUS_ATTN_BITS_LINK_STATE) != + (bp->status_blk->status_attn_bits_ack & + STATUS_ATTN_BITS_LINK_STATE)) { + + unsigned long flags; + + spin_lock_irqsave(&bp->phy_lock, flags); + bnx2_phy_int(bp); + spin_unlock_irqrestore(&bp->phy_lock, flags); + } + + if (bp->status_blk->status_tx_quick_consumer_index0 != bp->tx_cons) { + bnx2_tx_int(bp); + } + + if (bp->status_blk->status_rx_quick_consumer_index0 != bp->rx_cons) { + int orig_budget = *budget; + int work_done; + + if (orig_budget > dev->quota) + orig_budget = dev->quota; + + work_done = bnx2_rx_int(bp, orig_budget); + *budget -= work_done; + dev->quota -= work_done; + + if (work_done >= orig_budget) { + rx_done = 0; + } + } + + if (rx_done) { + netif_rx_complete(dev); + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, + BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | + bp->last_status_idx); + return 0; + } + + return 1; +} + +/* Called with rtnl_lock from vlan functions and also dev->xmit_lock + * from set_multicast. + */ +static void +bnx2_set_rx_mode(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + u32 rx_mode, sort_mode; + int i; + unsigned long flags; + + spin_lock_irqsave(&bp->phy_lock, flags); + + rx_mode = bp->rx_mode & ~(BNX2_EMAC_RX_MODE_PROMISCUOUS | + BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG); + sort_mode = 1 | BNX2_RPM_SORT_USER0_BC_EN; +#ifdef BCM_VLAN + if (!bp->vlgrp) { + rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG; + } +#else + rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG; +#endif + if (dev->flags & IFF_PROMISC) { + /* Promiscuous mode. */ + rx_mode |= BNX2_EMAC_RX_MODE_PROMISCUOUS; + sort_mode |= BNX2_RPM_SORT_USER0_PROM_EN; + } + else if (dev->flags & IFF_ALLMULTI) { + for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) { + REG_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4), + 0xffffffff); + } + sort_mode |= BNX2_RPM_SORT_USER0_MC_EN; + } + else { + /* Accept one or more multicast(s). */ + struct dev_mc_list *mclist; + u32 mc_filter[NUM_MC_HASH_REGISTERS]; + u32 regidx; + u32 bit; + u32 crc; + + memset(mc_filter, 0, 4 * NUM_MC_HASH_REGISTERS); + + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) { + + crc = ether_crc_le(ETH_ALEN, mclist->dmi_addr); + bit = crc & 0xff; + regidx = (bit & 0xe0) >> 5; + bit &= 0x1f; + mc_filter[regidx] |= (1 << bit); + } + + for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) { + REG_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4), + mc_filter[i]); + } + + sort_mode |= BNX2_RPM_SORT_USER0_MC_HSH_EN; + } + + if (rx_mode != bp->rx_mode) { + bp->rx_mode = rx_mode; + REG_WR(bp, BNX2_EMAC_RX_MODE, rx_mode); + } + + REG_WR(bp, BNX2_RPM_SORT_USER0, 0x0); + REG_WR(bp, BNX2_RPM_SORT_USER0, sort_mode); + REG_WR(bp, BNX2_RPM_SORT_USER0, sort_mode | BNX2_RPM_SORT_USER0_ENA); + + spin_unlock_irqrestore(&bp->phy_lock, flags); +} + +static void +load_rv2p_fw(struct bnx2 *bp, u32 *rv2p_code, u32 rv2p_code_len, + u32 rv2p_proc) +{ + int i; + u32 val; + + + for (i = 0; i < rv2p_code_len; i += 8) { + REG_WR(bp, BNX2_RV2P_INSTR_HIGH, *rv2p_code); + rv2p_code++; + REG_WR(bp, BNX2_RV2P_INSTR_LOW, *rv2p_code); + rv2p_code++; + + if (rv2p_proc == RV2P_PROC1) { + val = (i / 8) | BNX2_RV2P_PROC1_ADDR_CMD_RDWR; + REG_WR(bp, BNX2_RV2P_PROC1_ADDR_CMD, val); + } + else { + val = (i / 8) | BNX2_RV2P_PROC2_ADDR_CMD_RDWR; + REG_WR(bp, BNX2_RV2P_PROC2_ADDR_CMD, val); + } + } + + /* Reset the processor, un-stall is done later. */ + if (rv2p_proc == RV2P_PROC1) { + REG_WR(bp, BNX2_RV2P_COMMAND, BNX2_RV2P_COMMAND_PROC1_RESET); + } + else { + REG_WR(bp, BNX2_RV2P_COMMAND, BNX2_RV2P_COMMAND_PROC2_RESET); + } +} + +static void +load_cpu_fw(struct bnx2 *bp, struct cpu_reg *cpu_reg, struct fw_info *fw) +{ + u32 offset; + u32 val; + + /* Halt the CPU. */ + val = REG_RD_IND(bp, cpu_reg->mode); + val |= cpu_reg->mode_value_halt; + REG_WR_IND(bp, cpu_reg->mode, val); + REG_WR_IND(bp, cpu_reg->state, cpu_reg->state_value_clear); + + /* Load the Text area. */ + offset = cpu_reg->spad_base + (fw->text_addr - cpu_reg->mips_view_base); + if (fw->text) { + int j; + + for (j = 0; j < (fw->text_len / 4); j++, offset += 4) { + REG_WR_IND(bp, offset, fw->text[j]); + } + } + + /* Load the Data area. */ + offset = cpu_reg->spad_base + (fw->data_addr - cpu_reg->mips_view_base); + if (fw->data) { + int j; + + for (j = 0; j < (fw->data_len / 4); j++, offset += 4) { + REG_WR_IND(bp, offset, fw->data[j]); + } + } + + /* Load the SBSS area. */ + offset = cpu_reg->spad_base + (fw->sbss_addr - cpu_reg->mips_view_base); + if (fw->sbss) { + int j; + + for (j = 0; j < (fw->sbss_len / 4); j++, offset += 4) { + REG_WR_IND(bp, offset, fw->sbss[j]); + } + } + + /* Load the BSS area. */ + offset = cpu_reg->spad_base + (fw->bss_addr - cpu_reg->mips_view_base); + if (fw->bss) { + int j; + + for (j = 0; j < (fw->bss_len/4); j++, offset += 4) { + REG_WR_IND(bp, offset, fw->bss[j]); + } + } + + /* Load the Read-Only area. */ + offset = cpu_reg->spad_base + + (fw->rodata_addr - cpu_reg->mips_view_base); + if (fw->rodata) { + int j; + + for (j = 0; j < (fw->rodata_len / 4); j++, offset += 4) { + REG_WR_IND(bp, offset, fw->rodata[j]); + } + } + + /* Clear the pre-fetch instruction. */ + REG_WR_IND(bp, cpu_reg->inst, 0); + REG_WR_IND(bp, cpu_reg->pc, fw->start_addr); + + /* Start the CPU. */ + val = REG_RD_IND(bp, cpu_reg->mode); + val &= ~cpu_reg->mode_value_halt; + REG_WR_IND(bp, cpu_reg->state, cpu_reg->state_value_clear); + REG_WR_IND(bp, cpu_reg->mode, val); +} + +static void +bnx2_init_cpus(struct bnx2 *bp) +{ + struct cpu_reg cpu_reg; + struct fw_info fw; + + /* Initialize the RV2P processor. */ + load_rv2p_fw(bp, bnx2_rv2p_proc1, sizeof(bnx2_rv2p_proc1), RV2P_PROC1); + load_rv2p_fw(bp, bnx2_rv2p_proc2, sizeof(bnx2_rv2p_proc2), RV2P_PROC2); + + /* Initialize the RX Processor. */ + cpu_reg.mode = BNX2_RXP_CPU_MODE; + cpu_reg.mode_value_halt = BNX2_RXP_CPU_MODE_SOFT_HALT; + cpu_reg.mode_value_sstep = BNX2_RXP_CPU_MODE_STEP_ENA; + cpu_reg.state = BNX2_RXP_CPU_STATE; + cpu_reg.state_value_clear = 0xffffff; + cpu_reg.gpr0 = BNX2_RXP_CPU_REG_FILE; + cpu_reg.evmask = BNX2_RXP_CPU_EVENT_MASK; + cpu_reg.pc = BNX2_RXP_CPU_PROGRAM_COUNTER; + cpu_reg.inst = BNX2_RXP_CPU_INSTRUCTION; + cpu_reg.bp = BNX2_RXP_CPU_HW_BREAKPOINT; + cpu_reg.spad_base = BNX2_RXP_SCRATCH; + cpu_reg.mips_view_base = 0x8000000; + + fw.ver_major = bnx2_RXP_b06FwReleaseMajor; + fw.ver_minor = bnx2_RXP_b06FwReleaseMinor; + fw.ver_fix = bnx2_RXP_b06FwReleaseFix; + fw.start_addr = bnx2_RXP_b06FwStartAddr; + + fw.text_addr = bnx2_RXP_b06FwTextAddr; + fw.text_len = bnx2_RXP_b06FwTextLen; + fw.text_index = 0; + fw.text = bnx2_RXP_b06FwText; + + fw.data_addr = bnx2_RXP_b06FwDataAddr; + fw.data_len = bnx2_RXP_b06FwDataLen; + fw.data_index = 0; + fw.data = bnx2_RXP_b06FwData; + + fw.sbss_addr = bnx2_RXP_b06FwSbssAddr; + fw.sbss_len = bnx2_RXP_b06FwSbssLen; + fw.sbss_index = 0; + fw.sbss = bnx2_RXP_b06FwSbss; + + fw.bss_addr = bnx2_RXP_b06FwBssAddr; + fw.bss_len = bnx2_RXP_b06FwBssLen; + fw.bss_index = 0; + fw.bss = bnx2_RXP_b06FwBss; + + fw.rodata_addr = bnx2_RXP_b06FwRodataAddr; + fw.rodata_len = bnx2_RXP_b06FwRodataLen; + fw.rodata_index = 0; + fw.rodata = bnx2_RXP_b06FwRodata; + + load_cpu_fw(bp, &cpu_reg, &fw); + + /* Initialize the TX Processor. */ + cpu_reg.mode = BNX2_TXP_CPU_MODE; + cpu_reg.mode_value_halt = BNX2_TXP_CPU_MODE_SOFT_HALT; + cpu_reg.mode_value_sstep = BNX2_TXP_CPU_MODE_STEP_ENA; + cpu_reg.state = BNX2_TXP_CPU_STATE; + cpu_reg.state_value_clear = 0xffffff; + cpu_reg.gpr0 = BNX2_TXP_CPU_REG_FILE; + cpu_reg.evmask = BNX2_TXP_CPU_EVENT_MASK; + cpu_reg.pc = BNX2_TXP_CPU_PROGRAM_COUNTER; + cpu_reg.inst = BNX2_TXP_CPU_INSTRUCTION; + cpu_reg.bp = BNX2_TXP_CPU_HW_BREAKPOINT; + cpu_reg.spad_base = BNX2_TXP_SCRATCH; + cpu_reg.mips_view_base = 0x8000000; + + fw.ver_major = bnx2_TXP_b06FwReleaseMajor; + fw.ver_minor = bnx2_TXP_b06FwReleaseMinor; + fw.ver_fix = bnx2_TXP_b06FwReleaseFix; + fw.start_addr = bnx2_TXP_b06FwStartAddr; + + fw.text_addr = bnx2_TXP_b06FwTextAddr; + fw.text_len = bnx2_TXP_b06FwTextLen; + fw.text_index = 0; + fw.text = bnx2_TXP_b06FwText; + + fw.data_addr = bnx2_TXP_b06FwDataAddr; + fw.data_len = bnx2_TXP_b06FwDataLen; + fw.data_index = 0; + fw.data = bnx2_TXP_b06FwData; + + fw.sbss_addr = bnx2_TXP_b06FwSbssAddr; + fw.sbss_len = bnx2_TXP_b06FwSbssLen; + fw.sbss_index = 0; + fw.sbss = bnx2_TXP_b06FwSbss; + + fw.bss_addr = bnx2_TXP_b06FwBssAddr; + fw.bss_len = bnx2_TXP_b06FwBssLen; + fw.bss_index = 0; + fw.bss = bnx2_TXP_b06FwBss; + + fw.rodata_addr = bnx2_TXP_b06FwRodataAddr; + fw.rodata_len = bnx2_TXP_b06FwRodataLen; + fw.rodata_index = 0; + fw.rodata = bnx2_TXP_b06FwRodata; + + load_cpu_fw(bp, &cpu_reg, &fw); + + /* Initialize the TX Patch-up Processor. */ + cpu_reg.mode = BNX2_TPAT_CPU_MODE; + cpu_reg.mode_value_halt = BNX2_TPAT_CPU_MODE_SOFT_HALT; + cpu_reg.mode_value_sstep = BNX2_TPAT_CPU_MODE_STEP_ENA; + cpu_reg.state = BNX2_TPAT_CPU_STATE; + cpu_reg.state_value_clear = 0xffffff; + cpu_reg.gpr0 = BNX2_TPAT_CPU_REG_FILE; + cpu_reg.evmask = BNX2_TPAT_CPU_EVENT_MASK; + cpu_reg.pc = BNX2_TPAT_CPU_PROGRAM_COUNTER; + cpu_reg.inst = BNX2_TPAT_CPU_INSTRUCTION; + cpu_reg.bp = BNX2_TPAT_CPU_HW_BREAKPOINT; + cpu_reg.spad_base = BNX2_TPAT_SCRATCH; + cpu_reg.mips_view_base = 0x8000000; + + fw.ver_major = bnx2_TPAT_b06FwReleaseMajor; + fw.ver_minor = bnx2_TPAT_b06FwReleaseMinor; + fw.ver_fix = bnx2_TPAT_b06FwReleaseFix; + fw.start_addr = bnx2_TPAT_b06FwStartAddr; + + fw.text_addr = bnx2_TPAT_b06FwTextAddr; + fw.text_len = bnx2_TPAT_b06FwTextLen; + fw.text_index = 0; + fw.text = bnx2_TPAT_b06FwText; + + fw.data_addr = bnx2_TPAT_b06FwDataAddr; + fw.data_len = bnx2_TPAT_b06FwDataLen; + fw.data_index = 0; + fw.data = bnx2_TPAT_b06FwData; + + fw.sbss_addr = bnx2_TPAT_b06FwSbssAddr; + fw.sbss_len = bnx2_TPAT_b06FwSbssLen; + fw.sbss_index = 0; + fw.sbss = bnx2_TPAT_b06FwSbss; + + fw.bss_addr = bnx2_TPAT_b06FwBssAddr; + fw.bss_len = bnx2_TPAT_b06FwBssLen; + fw.bss_index = 0; + fw.bss = bnx2_TPAT_b06FwBss; + + fw.rodata_addr = bnx2_TPAT_b06FwRodataAddr; + fw.rodata_len = bnx2_TPAT_b06FwRodataLen; + fw.rodata_index = 0; + fw.rodata = bnx2_TPAT_b06FwRodata; + + load_cpu_fw(bp, &cpu_reg, &fw); + + /* Initialize the Completion Processor. */ + cpu_reg.mode = BNX2_COM_CPU_MODE; + cpu_reg.mode_value_halt = BNX2_COM_CPU_MODE_SOFT_HALT; + cpu_reg.mode_value_sstep = BNX2_COM_CPU_MODE_STEP_ENA; + cpu_reg.state = BNX2_COM_CPU_STATE; + cpu_reg.state_value_clear = 0xffffff; + cpu_reg.gpr0 = BNX2_COM_CPU_REG_FILE; + cpu_reg.evmask = BNX2_COM_CPU_EVENT_MASK; + cpu_reg.pc = BNX2_COM_CPU_PROGRAM_COUNTER; + cpu_reg.inst = BNX2_COM_CPU_INSTRUCTION; + cpu_reg.bp = BNX2_COM_CPU_HW_BREAKPOINT; + cpu_reg.spad_base = BNX2_COM_SCRATCH; + cpu_reg.mips_view_base = 0x8000000; + + fw.ver_major = bnx2_COM_b06FwReleaseMajor; + fw.ver_minor = bnx2_COM_b06FwReleaseMinor; + fw.ver_fix = bnx2_COM_b06FwReleaseFix; + fw.start_addr = bnx2_COM_b06FwStartAddr; + + fw.text_addr = bnx2_COM_b06FwTextAddr; + fw.text_len = bnx2_COM_b06FwTextLen; + fw.text_index = 0; + fw.text = bnx2_COM_b06FwText; + + fw.data_addr = bnx2_COM_b06FwDataAddr; + fw.data_len = bnx2_COM_b06FwDataLen; + fw.data_index = 0; + fw.data = bnx2_COM_b06FwData; + + fw.sbss_addr = bnx2_COM_b06FwSbssAddr; + fw.sbss_len = bnx2_COM_b06FwSbssLen; + fw.sbss_index = 0; + fw.sbss = bnx2_COM_b06FwSbss; + + fw.bss_addr = bnx2_COM_b06FwBssAddr; + fw.bss_len = bnx2_COM_b06FwBssLen; + fw.bss_index = 0; + fw.bss = bnx2_COM_b06FwBss; + + fw.rodata_addr = bnx2_COM_b06FwRodataAddr; + fw.rodata_len = bnx2_COM_b06FwRodataLen; + fw.rodata_index = 0; + fw.rodata = bnx2_COM_b06FwRodata; + + load_cpu_fw(bp, &cpu_reg, &fw); + +} + +static int +bnx2_set_power_state(struct bnx2 *bp, int state) +{ + u16 pmcsr; + + pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmcsr); + + switch (state) { + case 0: { + u32 val; + + pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, + (pmcsr & ~PCI_PM_CTRL_STATE_MASK) | + PCI_PM_CTRL_PME_STATUS); + + if (pmcsr & PCI_PM_CTRL_STATE_MASK) + /* delay required during transition out of D3hot */ + msleep(20); + + val = REG_RD(bp, BNX2_EMAC_MODE); + val |= BNX2_EMAC_MODE_MPKT_RCVD | BNX2_EMAC_MODE_ACPI_RCVD; + val &= ~BNX2_EMAC_MODE_MPKT; + REG_WR(bp, BNX2_EMAC_MODE, val); + + val = REG_RD(bp, BNX2_RPM_CONFIG); + val &= ~BNX2_RPM_CONFIG_ACPI_ENA; + REG_WR(bp, BNX2_RPM_CONFIG, val); + break; + } + case 3: { + int i; + u32 val, wol_msg; + + if (bp->wol) { + u32 advertising; + u8 autoneg; + + autoneg = bp->autoneg; + advertising = bp->advertising; + + bp->autoneg = AUTONEG_SPEED; + bp->advertising = ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_Autoneg; + + bnx2_setup_copper_phy(bp); + + bp->autoneg = autoneg; + bp->advertising = advertising; + + bnx2_set_mac_addr(bp); + + val = REG_RD(bp, BNX2_EMAC_MODE); + + /* Enable port mode. */ + val &= ~BNX2_EMAC_MODE_PORT; + val |= BNX2_EMAC_MODE_PORT_MII | + BNX2_EMAC_MODE_MPKT_RCVD | + BNX2_EMAC_MODE_ACPI_RCVD | + BNX2_EMAC_MODE_FORCE_LINK | + BNX2_EMAC_MODE_MPKT; + + REG_WR(bp, BNX2_EMAC_MODE, val); + + /* receive all multicast */ + for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) { + REG_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4), + 0xffffffff); + } + REG_WR(bp, BNX2_EMAC_RX_MODE, + BNX2_EMAC_RX_MODE_SORT_MODE); + + val = 1 | BNX2_RPM_SORT_USER0_BC_EN | + BNX2_RPM_SORT_USER0_MC_EN; + REG_WR(bp, BNX2_RPM_SORT_USER0, 0x0); + REG_WR(bp, BNX2_RPM_SORT_USER0, val); + REG_WR(bp, BNX2_RPM_SORT_USER0, val | + BNX2_RPM_SORT_USER0_ENA); + + /* Need to enable EMAC and RPM for WOL. */ + REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, + BNX2_MISC_ENABLE_SET_BITS_RX_PARSER_MAC_ENABLE | + BNX2_MISC_ENABLE_SET_BITS_TX_HEADER_Q_ENABLE | + BNX2_MISC_ENABLE_SET_BITS_EMAC_ENABLE); + + val = REG_RD(bp, BNX2_RPM_CONFIG); + val &= ~BNX2_RPM_CONFIG_ACPI_ENA; + REG_WR(bp, BNX2_RPM_CONFIG, val); + + wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_WOL; + } + else { + wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL; + } + + bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg); + + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + if ((CHIP_ID(bp) == CHIP_ID_5706_A0) || + (CHIP_ID(bp) == CHIP_ID_5706_A1)) { + + if (bp->wol) + pmcsr |= 3; + } + else { + pmcsr |= 3; + } + if (bp->wol) { + pmcsr |= PCI_PM_CTRL_PME_ENABLE; + } + pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, + pmcsr); + + /* No more memory access after this point until + * device is brought back to D0. + */ + udelay(50); + break; + } + default: + return -EINVAL; + } + return 0; +} + +static int +bnx2_acquire_nvram_lock(struct bnx2 *bp) +{ + u32 val; + int j; + + /* Request access to the flash interface. */ + REG_WR(bp, BNX2_NVM_SW_ARB, BNX2_NVM_SW_ARB_ARB_REQ_SET2); + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + val = REG_RD(bp, BNX2_NVM_SW_ARB); + if (val & BNX2_NVM_SW_ARB_ARB_ARB2) + break; + + udelay(5); + } + + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + + return 0; +} + +static int +bnx2_release_nvram_lock(struct bnx2 *bp) +{ + int j; + u32 val; + + /* Relinquish nvram interface. */ + REG_WR(bp, BNX2_NVM_SW_ARB, BNX2_NVM_SW_ARB_ARB_REQ_CLR2); + + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + val = REG_RD(bp, BNX2_NVM_SW_ARB); + if (!(val & BNX2_NVM_SW_ARB_ARB_ARB2)) + break; + + udelay(5); + } + + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + + return 0; +} + + +static int +bnx2_enable_nvram_write(struct bnx2 *bp) +{ + u32 val; + + val = REG_RD(bp, BNX2_MISC_CFG); + REG_WR(bp, BNX2_MISC_CFG, val | BNX2_MISC_CFG_NVM_WR_EN_PCI); + + if (!bp->flash_info->buffered) { + int j; + + REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE); + REG_WR(bp, BNX2_NVM_COMMAND, + BNX2_NVM_COMMAND_WREN | BNX2_NVM_COMMAND_DOIT); + + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + udelay(5); + + val = REG_RD(bp, BNX2_NVM_COMMAND); + if (val & BNX2_NVM_COMMAND_DONE) + break; + } + + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + } + return 0; +} + +static void +bnx2_disable_nvram_write(struct bnx2 *bp) +{ + u32 val; + + val = REG_RD(bp, BNX2_MISC_CFG); + REG_WR(bp, BNX2_MISC_CFG, val & ~BNX2_MISC_CFG_NVM_WR_EN); +} + + +static void +bnx2_enable_nvram_access(struct bnx2 *bp) +{ + u32 val; + + val = REG_RD(bp, BNX2_NVM_ACCESS_ENABLE); + /* Enable both bits, even on read. */ + REG_WR(bp, BNX2_NVM_ACCESS_ENABLE, + val | BNX2_NVM_ACCESS_ENABLE_EN | BNX2_NVM_ACCESS_ENABLE_WR_EN); +} + +static void +bnx2_disable_nvram_access(struct bnx2 *bp) +{ + u32 val; + + val = REG_RD(bp, BNX2_NVM_ACCESS_ENABLE); + /* Disable both bits, even after read. */ + REG_WR(bp, BNX2_NVM_ACCESS_ENABLE, + val & ~(BNX2_NVM_ACCESS_ENABLE_EN | + BNX2_NVM_ACCESS_ENABLE_WR_EN)); +} + +static int +bnx2_nvram_erase_page(struct bnx2 *bp, u32 offset) +{ + u32 cmd; + int j; + + if (bp->flash_info->buffered) + /* Buffered flash, no erase needed */ + return 0; + + /* Build an erase command */ + cmd = BNX2_NVM_COMMAND_ERASE | BNX2_NVM_COMMAND_WR | + BNX2_NVM_COMMAND_DOIT; + + /* Need to clear DONE bit separately. */ + REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE); + + /* Address of the NVRAM to read from. */ + REG_WR(bp, BNX2_NVM_ADDR, offset & BNX2_NVM_ADDR_NVM_ADDR_VALUE); + + /* Issue an erase command. */ + REG_WR(bp, BNX2_NVM_COMMAND, cmd); + + /* Wait for completion. */ + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + u32 val; + + udelay(5); + + val = REG_RD(bp, BNX2_NVM_COMMAND); + if (val & BNX2_NVM_COMMAND_DONE) + break; + } + + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + + return 0; +} + +static int +bnx2_nvram_read_dword(struct bnx2 *bp, u32 offset, u8 *ret_val, u32 cmd_flags) +{ + u32 cmd; + int j; + + /* Build the command word. */ + cmd = BNX2_NVM_COMMAND_DOIT | cmd_flags; + + /* Calculate an offset of a buffered flash. */ + if (bp->flash_info->buffered) { + offset = ((offset / bp->flash_info->page_size) << + bp->flash_info->page_bits) + + (offset % bp->flash_info->page_size); + } + + /* Need to clear DONE bit separately. */ + REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE); + + /* Address of the NVRAM to read from. */ + REG_WR(bp, BNX2_NVM_ADDR, offset & BNX2_NVM_ADDR_NVM_ADDR_VALUE); + + /* Issue a read command. */ + REG_WR(bp, BNX2_NVM_COMMAND, cmd); + + /* Wait for completion. */ + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + u32 val; + + udelay(5); + + val = REG_RD(bp, BNX2_NVM_COMMAND); + if (val & BNX2_NVM_COMMAND_DONE) { + val = REG_RD(bp, BNX2_NVM_READ); + + val = be32_to_cpu(val); + memcpy(ret_val, &val, 4); + break; + } + } + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + + return 0; +} + + +static int +bnx2_nvram_write_dword(struct bnx2 *bp, u32 offset, u8 *val, u32 cmd_flags) +{ + u32 cmd, val32; + int j; + + /* Build the command word. */ + cmd = BNX2_NVM_COMMAND_DOIT | BNX2_NVM_COMMAND_WR | cmd_flags; + + /* Calculate an offset of a buffered flash. */ + if (bp->flash_info->buffered) { + offset = ((offset / bp->flash_info->page_size) << + bp->flash_info->page_bits) + + (offset % bp->flash_info->page_size); + } + + /* Need to clear DONE bit separately. */ + REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE); + + memcpy(&val32, val, 4); + val32 = cpu_to_be32(val32); + + /* Write the data. */ + REG_WR(bp, BNX2_NVM_WRITE, val32); + + /* Address of the NVRAM to write to. */ + REG_WR(bp, BNX2_NVM_ADDR, offset & BNX2_NVM_ADDR_NVM_ADDR_VALUE); + + /* Issue the write command. */ + REG_WR(bp, BNX2_NVM_COMMAND, cmd); + + /* Wait for completion. */ + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + udelay(5); + + if (REG_RD(bp, BNX2_NVM_COMMAND) & BNX2_NVM_COMMAND_DONE) + break; + } + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + + return 0; +} + +static int +bnx2_init_nvram(struct bnx2 *bp) +{ + u32 val; + int j, entry_count, rc; + struct flash_spec *flash; + + /* Determine the selected interface. */ + val = REG_RD(bp, BNX2_NVM_CFG1); + + entry_count = sizeof(flash_table) / sizeof(struct flash_spec); + + rc = 0; + if (val & 0x40000000) { + + /* Flash interface has been reconfigured */ + for (j = 0, flash = &flash_table[0]; j < entry_count; + j++, flash++) { + + if (val == flash->config1) { + bp->flash_info = flash; + break; + } + } + } + else { + /* Not yet been reconfigured */ + + for (j = 0, flash = &flash_table[0]; j < entry_count; + j++, flash++) { + + if ((val & FLASH_STRAP_MASK) == flash->strapping) { + bp->flash_info = flash; + + /* Request access to the flash interface. */ + if ((rc = bnx2_acquire_nvram_lock(bp)) != 0) + return rc; + + /* Enable access to flash interface */ + bnx2_enable_nvram_access(bp); + + /* Reconfigure the flash interface */ + REG_WR(bp, BNX2_NVM_CFG1, flash->config1); + REG_WR(bp, BNX2_NVM_CFG2, flash->config2); + REG_WR(bp, BNX2_NVM_CFG3, flash->config3); + REG_WR(bp, BNX2_NVM_WRITE1, flash->write1); + + /* Disable access to flash interface */ + bnx2_disable_nvram_access(bp); + bnx2_release_nvram_lock(bp); + + break; + } + } + } /* if (val & 0x40000000) */ + + if (j == entry_count) { + bp->flash_info = NULL; + printk(KERN_ALERT "Unknown flash/EEPROM type.\n"); + rc = -ENODEV; + } + + return rc; +} + +static int +bnx2_nvram_read(struct bnx2 *bp, u32 offset, u8 *ret_buf, + int buf_size) +{ + int rc = 0; + u32 cmd_flags, offset32, len32, extra; + + if (buf_size == 0) + return 0; + + /* Request access to the flash interface. */ + if ((rc = bnx2_acquire_nvram_lock(bp)) != 0) + return rc; + + /* Enable access to flash interface */ + bnx2_enable_nvram_access(bp); + + len32 = buf_size; + offset32 = offset; + extra = 0; + + cmd_flags = 0; + + if (offset32 & 3) { + u8 buf[4]; + u32 pre_len; + + offset32 &= ~3; + pre_len = 4 - (offset & 3); + + if (pre_len >= len32) { + pre_len = len32; + cmd_flags = BNX2_NVM_COMMAND_FIRST | + BNX2_NVM_COMMAND_LAST; + } + else { + cmd_flags = BNX2_NVM_COMMAND_FIRST; + } + + rc = bnx2_nvram_read_dword(bp, offset32, buf, cmd_flags); + + if (rc) + return rc; + + memcpy(ret_buf, buf + (offset & 3), pre_len); + + offset32 += 4; + ret_buf += pre_len; + len32 -= pre_len; + } + if (len32 & 3) { + extra = 4 - (len32 & 3); + len32 = (len32 + 4) & ~3; + } + + if (len32 == 4) { + u8 buf[4]; + + if (cmd_flags) + cmd_flags = BNX2_NVM_COMMAND_LAST; + else + cmd_flags = BNX2_NVM_COMMAND_FIRST | + BNX2_NVM_COMMAND_LAST; + + rc = bnx2_nvram_read_dword(bp, offset32, buf, cmd_flags); + + memcpy(ret_buf, buf, 4 - extra); + } + else if (len32 > 0) { + u8 buf[4]; + + /* Read the first word. */ + if (cmd_flags) + cmd_flags = 0; + else + cmd_flags = BNX2_NVM_COMMAND_FIRST; + + rc = bnx2_nvram_read_dword(bp, offset32, ret_buf, cmd_flags); + + /* Advance to the next dword. */ + offset32 += 4; + ret_buf += 4; + len32 -= 4; + + while (len32 > 4 && rc == 0) { + rc = bnx2_nvram_read_dword(bp, offset32, ret_buf, 0); + + /* Advance to the next dword. */ + offset32 += 4; + ret_buf += 4; + len32 -= 4; + } + + if (rc) + return rc; + + cmd_flags = BNX2_NVM_COMMAND_LAST; + rc = bnx2_nvram_read_dword(bp, offset32, buf, cmd_flags); + + memcpy(ret_buf, buf, 4 - extra); + } + + /* Disable access to flash interface */ + bnx2_disable_nvram_access(bp); + + bnx2_release_nvram_lock(bp); + + return rc; +} + +static int +bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf, + int buf_size) +{ + u32 written, offset32, len32; + u8 *buf, start[4], end[4]; + int rc = 0; + int align_start, align_end; + + buf = data_buf; + offset32 = offset; + len32 = buf_size; + align_start = align_end = 0; + + if ((align_start = (offset32 & 3))) { + offset32 &= ~3; + len32 += align_start; + if ((rc = bnx2_nvram_read(bp, offset32, start, 4))) + return rc; + } + + if (len32 & 3) { + if ((len32 > 4) || !align_start) { + align_end = 4 - (len32 & 3); + len32 += align_end; + if ((rc = bnx2_nvram_read(bp, offset32 + len32 - 4, + end, 4))) { + return rc; + } + } + } + + if (align_start || align_end) { + buf = kmalloc(len32, GFP_KERNEL); + if (buf == 0) + return -ENOMEM; + if (align_start) { + memcpy(buf, start, 4); + } + if (align_end) { + memcpy(buf + len32 - 4, end, 4); + } + memcpy(buf + align_start, data_buf, buf_size); + } + + written = 0; + while ((written < len32) && (rc == 0)) { + u32 page_start, page_end, data_start, data_end; + u32 addr, cmd_flags; + int i; + u8 flash_buffer[264]; + + /* Find the page_start addr */ + page_start = offset32 + written; + page_start -= (page_start % bp->flash_info->page_size); + /* Find the page_end addr */ + page_end = page_start + bp->flash_info->page_size; + /* Find the data_start addr */ + data_start = (written == 0) ? offset32 : page_start; + /* Find the data_end addr */ + data_end = (page_end > offset32 + len32) ? + (offset32 + len32) : page_end; + + /* Request access to the flash interface. */ + if ((rc = bnx2_acquire_nvram_lock(bp)) != 0) + goto nvram_write_end; + + /* Enable access to flash interface */ + bnx2_enable_nvram_access(bp); + + cmd_flags = BNX2_NVM_COMMAND_FIRST; + if (bp->flash_info->buffered == 0) { + int j; + + /* Read the whole page into the buffer + * (non-buffer flash only) */ + for (j = 0; j < bp->flash_info->page_size; j += 4) { + if (j == (bp->flash_info->page_size - 4)) { + cmd_flags |= BNX2_NVM_COMMAND_LAST; + } + rc = bnx2_nvram_read_dword(bp, + page_start + j, + &flash_buffer[j], + cmd_flags); + + if (rc) + goto nvram_write_end; + + cmd_flags = 0; + } + } + + /* Enable writes to flash interface (unlock write-protect) */ + if ((rc = bnx2_enable_nvram_write(bp)) != 0) + goto nvram_write_end; + + /* Erase the page */ + if ((rc = bnx2_nvram_erase_page(bp, page_start)) != 0) + goto nvram_write_end; + + /* Re-enable the write again for the actual write */ + bnx2_enable_nvram_write(bp); + + /* Loop to write back the buffer data from page_start to + * data_start */ + i = 0; + if (bp->flash_info->buffered == 0) { + for (addr = page_start; addr < data_start; + addr += 4, i += 4) { + + rc = bnx2_nvram_write_dword(bp, addr, + &flash_buffer[i], cmd_flags); + + if (rc != 0) + goto nvram_write_end; + + cmd_flags = 0; + } + } + + /* Loop to write the new data from data_start to data_end */ + for (addr = data_start; addr < data_end; addr += 4, i++) { + if ((addr == page_end - 4) || + ((bp->flash_info->buffered) && + (addr == data_end - 4))) { + + cmd_flags |= BNX2_NVM_COMMAND_LAST; + } + rc = bnx2_nvram_write_dword(bp, addr, buf, + cmd_flags); + + if (rc != 0) + goto nvram_write_end; + + cmd_flags = 0; + buf += 4; + } + + /* Loop to write back the buffer data from data_end + * to page_end */ + if (bp->flash_info->buffered == 0) { + for (addr = data_end; addr < page_end; + addr += 4, i += 4) { + + if (addr == page_end-4) { + cmd_flags = BNX2_NVM_COMMAND_LAST; + } + rc = bnx2_nvram_write_dword(bp, addr, + &flash_buffer[i], cmd_flags); + + if (rc != 0) + goto nvram_write_end; + + cmd_flags = 0; + } + } + + /* Disable writes to flash interface (lock write-protect) */ + bnx2_disable_nvram_write(bp); + + /* Disable access to flash interface */ + bnx2_disable_nvram_access(bp); + bnx2_release_nvram_lock(bp); + + /* Increment written */ + written += data_end - data_start; + } + +nvram_write_end: + if (align_start || align_end) + kfree(buf); + return rc; +} + +static int +bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) +{ + u32 val; + int i, rc = 0; + + /* Wait for the current PCI transaction to complete before + * issuing a reset. */ + REG_WR(bp, BNX2_MISC_ENABLE_CLR_BITS, + BNX2_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE | + BNX2_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE | + BNX2_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE | + BNX2_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE); + val = REG_RD(bp, BNX2_MISC_ENABLE_CLR_BITS); + udelay(5); + + /* Deposit a driver reset signature so the firmware knows that + * this is a soft reset. */ + REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_RESET_SIGNATURE, + BNX2_DRV_RESET_SIGNATURE_MAGIC); + + bp->fw_timed_out = 0; + + /* Wait for the firmware to tell us it is ok to issue a reset. */ + bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code); + + /* Do a dummy read to force the chip to complete all current transaction + * before we issue a reset. */ + val = REG_RD(bp, BNX2_MISC_ID); + + val = BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | + BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | + BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP; + + /* Chip reset. */ + REG_WR(bp, BNX2_PCICFG_MISC_CONFIG, val); + + if ((CHIP_ID(bp) == CHIP_ID_5706_A0) || + (CHIP_ID(bp) == CHIP_ID_5706_A1)) + msleep(15); + + /* Reset takes approximate 30 usec */ + for (i = 0; i < 10; i++) { + val = REG_RD(bp, BNX2_PCICFG_MISC_CONFIG); + if ((val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | + BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) == 0) { + break; + } + udelay(10); + } + + if (val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | + BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) { + printk(KERN_ERR PFX "Chip reset did not complete\n"); + return -EBUSY; + } + + /* Make sure byte swapping is properly configured. */ + val = REG_RD(bp, BNX2_PCI_SWAP_DIAG0); + if (val != 0x01020304) { + printk(KERN_ERR PFX "Chip not in correct endian mode\n"); + return -ENODEV; + } + + bp->fw_timed_out = 0; + + /* Wait for the firmware to finish its initialization. */ + bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT1 | reset_code); + + if (CHIP_ID(bp) == CHIP_ID_5706_A0) { + /* Adjust the voltage regular to two steps lower. The default + * of this register is 0x0000000e. */ + REG_WR(bp, BNX2_MISC_VREG_CONTROL, 0x000000fa); + + /* Remove bad rbuf memory from the free pool. */ + rc = bnx2_alloc_bad_rbuf(bp); + } + + return rc; +} + +static int +bnx2_init_chip(struct bnx2 *bp) +{ + u32 val; + + /* Make sure the interrupt is not active. */ + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, BNX2_PCICFG_INT_ACK_CMD_MASK_INT); + + val = BNX2_DMA_CONFIG_DATA_BYTE_SWAP | + BNX2_DMA_CONFIG_DATA_WORD_SWAP | +#ifdef __BIG_ENDIAN + BNX2_DMA_CONFIG_CNTL_BYTE_SWAP | +#endif + BNX2_DMA_CONFIG_CNTL_WORD_SWAP | + DMA_READ_CHANS << 12 | + DMA_WRITE_CHANS << 16; + + val |= (0x2 << 20) | (1 << 11); + + if ((bp->flags & PCIX_FLAG) && (bp->bus_speed_mhz = 133)) + val |= (1 << 23); + + if ((CHIP_NUM(bp) == CHIP_NUM_5706) && + (CHIP_ID(bp) != CHIP_ID_5706_A0) && !(bp->flags & PCIX_FLAG)) + val |= BNX2_DMA_CONFIG_CNTL_PING_PONG_DMA; + + REG_WR(bp, BNX2_DMA_CONFIG, val); + + if (CHIP_ID(bp) == CHIP_ID_5706_A0) { + val = REG_RD(bp, BNX2_TDMA_CONFIG); + val |= BNX2_TDMA_CONFIG_ONE_DMA; + REG_WR(bp, BNX2_TDMA_CONFIG, val); + } + + if (bp->flags & PCIX_FLAG) { + u16 val16; + + pci_read_config_word(bp->pdev, bp->pcix_cap + PCI_X_CMD, + &val16); + pci_write_config_word(bp->pdev, bp->pcix_cap + PCI_X_CMD, + val16 & ~PCI_X_CMD_ERO); + } + + REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, + BNX2_MISC_ENABLE_SET_BITS_HOST_COALESCE_ENABLE | + BNX2_MISC_ENABLE_STATUS_BITS_RX_V2P_ENABLE | + BNX2_MISC_ENABLE_STATUS_BITS_CONTEXT_ENABLE); + + /* Initialize context mapping and zero out the quick contexts. The + * context block must have already been enabled. */ + bnx2_init_context(bp); + + bnx2_init_cpus(bp); + bnx2_init_nvram(bp); + + bnx2_set_mac_addr(bp); + + val = REG_RD(bp, BNX2_MQ_CONFIG); + val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE; + val |= BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256; + REG_WR(bp, BNX2_MQ_CONFIG, val); + + val = 0x10000 + (MAX_CID_CNT * MB_KERNEL_CTX_SIZE); + REG_WR(bp, BNX2_MQ_KNL_BYP_WIND_START, val); + REG_WR(bp, BNX2_MQ_KNL_WIND_END, val); + + val = (BCM_PAGE_BITS - 8) << 24; + REG_WR(bp, BNX2_RV2P_CONFIG, val); + + /* Configure page size. */ + val = REG_RD(bp, BNX2_TBDR_CONFIG); + val &= ~BNX2_TBDR_CONFIG_PAGE_SIZE; + val |= (BCM_PAGE_BITS - 8) << 24 | 0x40; + REG_WR(bp, BNX2_TBDR_CONFIG, val); + + val = bp->mac_addr[0] + + (bp->mac_addr[1] << 8) + + (bp->mac_addr[2] << 16) + + bp->mac_addr[3] + + (bp->mac_addr[4] << 8) + + (bp->mac_addr[5] << 16); + REG_WR(bp, BNX2_EMAC_BACKOFF_SEED, val); + + /* Program the MTU. Also include 4 bytes for CRC32. */ + val = bp->dev->mtu + ETH_HLEN + 4; + if (val > (MAX_ETHERNET_PACKET_SIZE + 4)) + val |= BNX2_EMAC_RX_MTU_SIZE_JUMBO_ENA; + REG_WR(bp, BNX2_EMAC_RX_MTU_SIZE, val); + + bp->last_status_idx = 0; + bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE; + + /* Set up how to generate a link change interrupt. */ + REG_WR(bp, BNX2_EMAC_ATTENTION_ENA, BNX2_EMAC_ATTENTION_ENA_LINK); + + REG_WR(bp, BNX2_HC_STATUS_ADDR_L, + (u64) bp->status_blk_mapping & 0xffffffff); + REG_WR(bp, BNX2_HC_STATUS_ADDR_H, (u64) bp->status_blk_mapping >> 32); + + REG_WR(bp, BNX2_HC_STATISTICS_ADDR_L, + (u64) bp->stats_blk_mapping & 0xffffffff); + REG_WR(bp, BNX2_HC_STATISTICS_ADDR_H, + (u64) bp->stats_blk_mapping >> 32); + + REG_WR(bp, BNX2_HC_TX_QUICK_CONS_TRIP, + (bp->tx_quick_cons_trip_int << 16) | bp->tx_quick_cons_trip); + + REG_WR(bp, BNX2_HC_RX_QUICK_CONS_TRIP, + (bp->rx_quick_cons_trip_int << 16) | bp->rx_quick_cons_trip); + + REG_WR(bp, BNX2_HC_COMP_PROD_TRIP, + (bp->comp_prod_trip_int << 16) | bp->comp_prod_trip); + + REG_WR(bp, BNX2_HC_TX_TICKS, (bp->tx_ticks_int << 16) | bp->tx_ticks); + + REG_WR(bp, BNX2_HC_RX_TICKS, (bp->rx_ticks_int << 16) | bp->rx_ticks); + + REG_WR(bp, BNX2_HC_COM_TICKS, + (bp->com_ticks_int << 16) | bp->com_ticks); + + REG_WR(bp, BNX2_HC_CMD_TICKS, + (bp->cmd_ticks_int << 16) | bp->cmd_ticks); + + REG_WR(bp, BNX2_HC_STATS_TICKS, bp->stats_ticks & 0xffff00); + REG_WR(bp, BNX2_HC_STAT_COLLECT_TICKS, 0xbb8); /* 3ms */ + + if (CHIP_ID(bp) == CHIP_ID_5706_A1) + REG_WR(bp, BNX2_HC_CONFIG, BNX2_HC_CONFIG_COLLECT_STATS); + else { + REG_WR(bp, BNX2_HC_CONFIG, BNX2_HC_CONFIG_RX_TMR_MODE | + BNX2_HC_CONFIG_TX_TMR_MODE | + BNX2_HC_CONFIG_COLLECT_STATS); + } + + /* Clear internal stats counters. */ + REG_WR(bp, BNX2_HC_COMMAND, BNX2_HC_COMMAND_CLR_STAT_NOW); + + REG_WR(bp, BNX2_HC_ATTN_BITS_ENABLE, STATUS_ATTN_BITS_LINK_STATE); + + /* Initialize the receive filter. */ + bnx2_set_rx_mode(bp->dev); + + bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT2 | BNX2_DRV_MSG_CODE_RESET); + + REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, 0x5ffffff); + REG_RD(bp, BNX2_MISC_ENABLE_SET_BITS); + + udelay(20); + + return 0; +} + + +static void +bnx2_init_tx_ring(struct bnx2 *bp) +{ + struct tx_bd *txbd; + u32 val; + + txbd = &bp->tx_desc_ring[MAX_TX_DESC_CNT]; + + txbd->tx_bd_haddr_hi = (u64) bp->tx_desc_mapping >> 32; + txbd->tx_bd_haddr_lo = (u64) bp->tx_desc_mapping & 0xffffffff; + + bp->tx_prod = 0; + bp->tx_cons = 0; + bp->tx_prod_bseq = 0; + atomic_set(&bp->tx_avail_bd, bp->tx_ring_size); + + val = BNX2_L2CTX_TYPE_TYPE_L2; + val |= BNX2_L2CTX_TYPE_SIZE_L2; + CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TYPE, val); + + val = BNX2_L2CTX_CMD_TYPE_TYPE_L2; + val |= 8 << 16; + CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_CMD_TYPE, val); + + val = (u64) bp->tx_desc_mapping >> 32; + CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TBDR_BHADDR_HI, val); + + val = (u64) bp->tx_desc_mapping & 0xffffffff; + CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TBDR_BHADDR_LO, val); +} + +static void +bnx2_init_rx_ring(struct bnx2 *bp) +{ + struct rx_bd *rxbd; + int i; + u16 prod, ring_prod; + u32 val; + + /* 8 for CRC and VLAN */ + bp->rx_buf_use_size = bp->dev->mtu + ETH_HLEN + bp->rx_offset + 8; + /* 8 for alignment */ + bp->rx_buf_size = bp->rx_buf_use_size + 8; + + ring_prod = prod = bp->rx_prod = 0; + bp->rx_cons = 0; + bp->rx_prod_bseq = 0; + + rxbd = &bp->rx_desc_ring[0]; + for (i = 0; i < MAX_RX_DESC_CNT; i++, rxbd++) { + rxbd->rx_bd_len = bp->rx_buf_use_size; + rxbd->rx_bd_flags = RX_BD_FLAGS_START | RX_BD_FLAGS_END; + } + + rxbd->rx_bd_haddr_hi = (u64) bp->rx_desc_mapping >> 32; + rxbd->rx_bd_haddr_lo = (u64) bp->rx_desc_mapping & 0xffffffff; + + val = BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE; + val |= BNX2_L2CTX_CTX_TYPE_SIZE_L2; + val |= 0x02 << 8; + CTX_WR(bp, GET_CID_ADDR(RX_CID), BNX2_L2CTX_CTX_TYPE, val); + + val = (u64) bp->rx_desc_mapping >> 32; + CTX_WR(bp, GET_CID_ADDR(RX_CID), BNX2_L2CTX_NX_BDHADDR_HI, val); + + val = (u64) bp->rx_desc_mapping & 0xffffffff; + CTX_WR(bp, GET_CID_ADDR(RX_CID), BNX2_L2CTX_NX_BDHADDR_LO, val); + + for ( ;ring_prod < bp->rx_ring_size; ) { + if (bnx2_alloc_rx_skb(bp, ring_prod) < 0) { + break; + } + prod = NEXT_RX_BD(prod); + ring_prod = RX_RING_IDX(prod); + } + bp->rx_prod = prod; + + REG_WR16(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BDIDX, prod); + + REG_WR(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BSEQ, bp->rx_prod_bseq); +} + +static void +bnx2_free_tx_skbs(struct bnx2 *bp) +{ + int i; + + if (bp->tx_buf_ring == NULL) + return; + + for (i = 0; i < TX_DESC_CNT; ) { + struct sw_bd *tx_buf = &bp->tx_buf_ring[i]; + struct sk_buff *skb = tx_buf->skb; + int j, last; + + if (skb == NULL) { + i++; + continue; + } + + pci_unmap_single(bp->pdev, pci_unmap_addr(tx_buf, mapping), + skb_headlen(skb), PCI_DMA_TODEVICE); + + tx_buf->skb = NULL; + + last = skb_shinfo(skb)->nr_frags; + for (j = 0; j < last; j++) { + tx_buf = &bp->tx_buf_ring[i + j + 1]; + pci_unmap_page(bp->pdev, + pci_unmap_addr(tx_buf, mapping), + skb_shinfo(skb)->frags[j].size, + PCI_DMA_TODEVICE); + } + dev_kfree_skb_any(skb); + i += j + 1; + } + +} + +static void +bnx2_free_rx_skbs(struct bnx2 *bp) +{ + int i; + + if (bp->rx_buf_ring == NULL) + return; + + for (i = 0; i < RX_DESC_CNT; i++) { + struct sw_bd *rx_buf = &bp->rx_buf_ring[i]; + struct sk_buff *skb = rx_buf->skb; + + if (skb == 0) + continue; + + pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping), + bp->rx_buf_use_size, PCI_DMA_FROMDEVICE); + + rx_buf->skb = NULL; + + dev_kfree_skb_any(skb); + } +} + +static void +bnx2_free_skbs(struct bnx2 *bp) +{ + bnx2_free_tx_skbs(bp); + bnx2_free_rx_skbs(bp); +} + +static int +bnx2_reset_nic(struct bnx2 *bp, u32 reset_code) +{ + int rc; + + rc = bnx2_reset_chip(bp, reset_code); + bnx2_free_skbs(bp); + if (rc) + return rc; + + bnx2_init_chip(bp); + bnx2_init_tx_ring(bp); + bnx2_init_rx_ring(bp); + return 0; +} + +static int +bnx2_init_nic(struct bnx2 *bp) +{ + int rc; + + if ((rc = bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_RESET)) != 0) + return rc; + + bnx2_init_phy(bp); + bnx2_set_link(bp); + return 0; +} + +static int +bnx2_test_registers(struct bnx2 *bp) +{ + int ret; + int i; + static struct { + u16 offset; + u16 flags; + u32 rw_mask; + u32 ro_mask; + } reg_tbl[] = { + { 0x006c, 0, 0x00000000, 0x0000003f }, + { 0x0090, 0, 0xffffffff, 0x00000000 }, + { 0x0094, 0, 0x00000000, 0x00000000 }, + + { 0x0404, 0, 0x00003f00, 0x00000000 }, + { 0x0418, 0, 0x00000000, 0xffffffff }, + { 0x041c, 0, 0x00000000, 0xffffffff }, + { 0x0420, 0, 0x00000000, 0x80ffffff }, + { 0x0424, 0, 0x00000000, 0x00000000 }, + { 0x0428, 0, 0x00000000, 0x00000001 }, + { 0x0450, 0, 0x00000000, 0x0000ffff }, + { 0x0454, 0, 0x00000000, 0xffffffff }, + { 0x0458, 0, 0x00000000, 0xffffffff }, + + { 0x0808, 0, 0x00000000, 0xffffffff }, + { 0x0854, 0, 0x00000000, 0xffffffff }, + { 0x0868, 0, 0x00000000, 0x77777777 }, + { 0x086c, 0, 0x00000000, 0x77777777 }, + { 0x0870, 0, 0x00000000, 0x77777777 }, + { 0x0874, 0, 0x00000000, 0x77777777 }, + + { 0x0c00, 0, 0x00000000, 0x00000001 }, + { 0x0c04, 0, 0x00000000, 0x03ff0001 }, + { 0x0c08, 0, 0x0f0ff073, 0x00000000 }, + { 0x0c0c, 0, 0x00ffffff, 0x00000000 }, + { 0x0c30, 0, 0x00000000, 0xffffffff }, + { 0x0c34, 0, 0x00000000, 0xffffffff }, + { 0x0c38, 0, 0x00000000, 0xffffffff }, + { 0x0c3c, 0, 0x00000000, 0xffffffff }, + { 0x0c40, 0, 0x00000000, 0xffffffff }, + { 0x0c44, 0, 0x00000000, 0xffffffff }, + { 0x0c48, 0, 0x00000000, 0x0007ffff }, + { 0x0c4c, 0, 0x00000000, 0xffffffff }, + { 0x0c50, 0, 0x00000000, 0xffffffff }, + { 0x0c54, 0, 0x00000000, 0xffffffff }, + { 0x0c58, 0, 0x00000000, 0xffffffff }, + { 0x0c5c, 0, 0x00000000, 0xffffffff }, + { 0x0c60, 0, 0x00000000, 0xffffffff }, + { 0x0c64, 0, 0x00000000, 0xffffffff }, + { 0x0c68, 0, 0x00000000, 0xffffffff }, + { 0x0c6c, 0, 0x00000000, 0xffffffff }, + { 0x0c70, 0, 0x00000000, 0xffffffff }, + { 0x0c74, 0, 0x00000000, 0xffffffff }, + { 0x0c78, 0, 0x00000000, 0xffffffff }, + { 0x0c7c, 0, 0x00000000, 0xffffffff }, + { 0x0c80, 0, 0x00000000, 0xffffffff }, + { 0x0c84, 0, 0x00000000, 0xffffffff }, + { 0x0c88, 0, 0x00000000, 0xffffffff }, + { 0x0c8c, 0, 0x00000000, 0xffffffff }, + { 0x0c90, 0, 0x00000000, 0xffffffff }, + { 0x0c94, 0, 0x00000000, 0xffffffff }, + { 0x0c98, 0, 0x00000000, 0xffffffff }, + { 0x0c9c, 0, 0x00000000, 0xffffffff }, + { 0x0ca0, 0, 0x00000000, 0xffffffff }, + { 0x0ca4, 0, 0x00000000, 0xffffffff }, + { 0x0ca8, 0, 0x00000000, 0x0007ffff }, + { 0x0cac, 0, 0x00000000, 0xffffffff }, + { 0x0cb0, 0, 0x00000000, 0xffffffff }, + { 0x0cb4, 0, 0x00000000, 0xffffffff }, + { 0x0cb8, 0, 0x00000000, 0xffffffff }, + { 0x0cbc, 0, 0x00000000, 0xffffffff }, + { 0x0cc0, 0, 0x00000000, 0xffffffff }, + { 0x0cc4, 0, 0x00000000, 0xffffffff }, + { 0x0cc8, 0, 0x00000000, 0xffffffff }, + { 0x0ccc, 0, 0x00000000, 0xffffffff }, + { 0x0cd0, 0, 0x00000000, 0xffffffff }, + { 0x0cd4, 0, 0x00000000, 0xffffffff }, + { 0x0cd8, 0, 0x00000000, 0xffffffff }, + { 0x0cdc, 0, 0x00000000, 0xffffffff }, + { 0x0ce0, 0, 0x00000000, 0xffffffff }, + { 0x0ce4, 0, 0x00000000, 0xffffffff }, + { 0x0ce8, 0, 0x00000000, 0xffffffff }, + { 0x0cec, 0, 0x00000000, 0xffffffff }, + { 0x0cf0, 0, 0x00000000, 0xffffffff }, + { 0x0cf4, 0, 0x00000000, 0xffffffff }, + { 0x0cf8, 0, 0x00000000, 0xffffffff }, + { 0x0cfc, 0, 0x00000000, 0xffffffff }, + { 0x0d00, 0, 0x00000000, 0xffffffff }, + { 0x0d04, 0, 0x00000000, 0xffffffff }, + + { 0x1000, 0, 0x00000000, 0x00000001 }, + { 0x1004, 0, 0x00000000, 0x000f0001 }, + { 0x1044, 0, 0x00000000, 0xffc003ff }, + { 0x1080, 0, 0x00000000, 0x0001ffff }, + { 0x1084, 0, 0x00000000, 0xffffffff }, + { 0x1088, 0, 0x00000000, 0xffffffff }, + { 0x108c, 0, 0x00000000, 0xffffffff }, + { 0x1090, 0, 0x00000000, 0xffffffff }, + { 0x1094, 0, 0x00000000, 0xffffffff }, + { 0x1098, 0, 0x00000000, 0xffffffff }, + { 0x109c, 0, 0x00000000, 0xffffffff }, + { 0x10a0, 0, 0x00000000, 0xffffffff }, + + { 0x1408, 0, 0x01c00800, 0x00000000 }, + { 0x149c, 0, 0x8000ffff, 0x00000000 }, + { 0x14a8, 0, 0x00000000, 0x000001ff }, + { 0x14ac, 0, 0x4fffffff, 0x10000000 }, + { 0x14b0, 0, 0x00000002, 0x00000001 }, + { 0x14b8, 0, 0x00000000, 0x00000000 }, + { 0x14c0, 0, 0x00000000, 0x00000009 }, + { 0x14c4, 0, 0x00003fff, 0x00000000 }, + { 0x14cc, 0, 0x00000000, 0x00000001 }, + { 0x14d0, 0, 0xffffffff, 0x00000000 }, + { 0x1500, 0, 0x00000000, 0xffffffff }, + { 0x1504, 0, 0x00000000, 0xffffffff }, + { 0x1508, 0, 0x00000000, 0xffffffff }, + { 0x150c, 0, 0x00000000, 0xffffffff }, + { 0x1510, 0, 0x00000000, 0xffffffff }, + { 0x1514, 0, 0x00000000, 0xffffffff }, + { 0x1518, 0, 0x00000000, 0xffffffff }, + { 0x151c, 0, 0x00000000, 0xffffffff }, + { 0x1520, 0, 0x00000000, 0xffffffff }, + { 0x1524, 0, 0x00000000, 0xffffffff }, + { 0x1528, 0, 0x00000000, 0xffffffff }, + { 0x152c, 0, 0x00000000, 0xffffffff }, + { 0x1530, 0, 0x00000000, 0xffffffff }, + { 0x1534, 0, 0x00000000, 0xffffffff }, + { 0x1538, 0, 0x00000000, 0xffffffff }, + { 0x153c, 0, 0x00000000, 0xffffffff }, + { 0x1540, 0, 0x00000000, 0xffffffff }, + { 0x1544, 0, 0x00000000, 0xffffffff }, + { 0x1548, 0, 0x00000000, 0xffffffff }, + { 0x154c, 0, 0x00000000, 0xffffffff }, + { 0x1550, 0, 0x00000000, 0xffffffff }, + { 0x1554, 0, 0x00000000, 0xffffffff }, + { 0x1558, 0, 0x00000000, 0xffffffff }, + { 0x1600, 0, 0x00000000, 0xffffffff }, + { 0x1604, 0, 0x00000000, 0xffffffff }, + { 0x1608, 0, 0x00000000, 0xffffffff }, + { 0x160c, 0, 0x00000000, 0xffffffff }, + { 0x1610, 0, 0x00000000, 0xffffffff }, + { 0x1614, 0, 0x00000000, 0xffffffff }, + { 0x1618, 0, 0x00000000, 0xffffffff }, + { 0x161c, 0, 0x00000000, 0xffffffff }, + { 0x1620, 0, 0x00000000, 0xffffffff }, + { 0x1624, 0, 0x00000000, 0xffffffff }, + { 0x1628, 0, 0x00000000, 0xffffffff }, + { 0x162c, 0, 0x00000000, 0xffffffff }, + { 0x1630, 0, 0x00000000, 0xffffffff }, + { 0x1634, 0, 0x00000000, 0xffffffff }, + { 0x1638, 0, 0x00000000, 0xffffffff }, + { 0x163c, 0, 0x00000000, 0xffffffff }, + { 0x1640, 0, 0x00000000, 0xffffffff }, + { 0x1644, 0, 0x00000000, 0xffffffff }, + { 0x1648, 0, 0x00000000, 0xffffffff }, + { 0x164c, 0, 0x00000000, 0xffffffff }, + { 0x1650, 0, 0x00000000, 0xffffffff }, + { 0x1654, 0, 0x00000000, 0xffffffff }, + + { 0x1800, 0, 0x00000000, 0x00000001 }, + { 0x1804, 0, 0x00000000, 0x00000003 }, + { 0x1840, 0, 0x00000000, 0xffffffff }, + { 0x1844, 0, 0x00000000, 0xffffffff }, + { 0x1848, 0, 0x00000000, 0xffffffff }, + { 0x184c, 0, 0x00000000, 0xffffffff }, + { 0x1850, 0, 0x00000000, 0xffffffff }, + { 0x1900, 0, 0x7ffbffff, 0x00000000 }, + { 0x1904, 0, 0xffffffff, 0x00000000 }, + { 0x190c, 0, 0xffffffff, 0x00000000 }, + { 0x1914, 0, 0xffffffff, 0x00000000 }, + { 0x191c, 0, 0xffffffff, 0x00000000 }, + { 0x1924, 0, 0xffffffff, 0x00000000 }, + { 0x192c, 0, 0xffffffff, 0x00000000 }, + { 0x1934, 0, 0xffffffff, 0x00000000 }, + { 0x193c, 0, 0xffffffff, 0x00000000 }, + { 0x1944, 0, 0xffffffff, 0x00000000 }, + { 0x194c, 0, 0xffffffff, 0x00000000 }, + { 0x1954, 0, 0xffffffff, 0x00000000 }, + { 0x195c, 0, 0xffffffff, 0x00000000 }, + { 0x1964, 0, 0xffffffff, 0x00000000 }, + { 0x196c, 0, 0xffffffff, 0x00000000 }, + { 0x1974, 0, 0xffffffff, 0x00000000 }, + { 0x197c, 0, 0xffffffff, 0x00000000 }, + { 0x1980, 0, 0x0700ffff, 0x00000000 }, + + { 0x1c00, 0, 0x00000000, 0x00000001 }, + { 0x1c04, 0, 0x00000000, 0x00000003 }, + { 0x1c08, 0, 0x0000000f, 0x00000000 }, + { 0x1c40, 0, 0x00000000, 0xffffffff }, + { 0x1c44, 0, 0x00000000, 0xffffffff }, + { 0x1c48, 0, 0x00000000, 0xffffffff }, + { 0x1c4c, 0, 0x00000000, 0xffffffff }, + { 0x1c50, 0, 0x00000000, 0xffffffff }, + { 0x1d00, 0, 0x7ffbffff, 0x00000000 }, + { 0x1d04, 0, 0xffffffff, 0x00000000 }, + { 0x1d0c, 0, 0xffffffff, 0x00000000 }, + { 0x1d14, 0, 0xffffffff, 0x00000000 }, + { 0x1d1c, 0, 0xffffffff, 0x00000000 }, + { 0x1d24, 0, 0xffffffff, 0x00000000 }, + { 0x1d2c, 0, 0xffffffff, 0x00000000 }, + { 0x1d34, 0, 0xffffffff, 0x00000000 }, + { 0x1d3c, 0, 0xffffffff, 0x00000000 }, + { 0x1d44, 0, 0xffffffff, 0x00000000 }, + { 0x1d4c, 0, 0xffffffff, 0x00000000 }, + { 0x1d54, 0, 0xffffffff, 0x00000000 }, + { 0x1d5c, 0, 0xffffffff, 0x00000000 }, + { 0x1d64, 0, 0xffffffff, 0x00000000 }, + { 0x1d6c, 0, 0xffffffff, 0x00000000 }, + { 0x1d74, 0, 0xffffffff, 0x00000000 }, + { 0x1d7c, 0, 0xffffffff, 0x00000000 }, + { 0x1d80, 0, 0x0700ffff, 0x00000000 }, + + { 0x2004, 0, 0x00000000, 0x0337000f }, + { 0x2008, 0, 0xffffffff, 0x00000000 }, + { 0x200c, 0, 0xffffffff, 0x00000000 }, + { 0x2010, 0, 0xffffffff, 0x00000000 }, + { 0x2014, 0, 0x801fff80, 0x00000000 }, + { 0x2018, 0, 0x000003ff, 0x00000000 }, + + { 0x2800, 0, 0x00000000, 0x00000001 }, + { 0x2804, 0, 0x00000000, 0x00003f01 }, + { 0x2808, 0, 0x0f3f3f03, 0x00000000 }, + { 0x2810, 0, 0xffff0000, 0x00000000 }, + { 0x2814, 0, 0xffff0000, 0x00000000 }, + { 0x2818, 0, 0xffff0000, 0x00000000 }, + { 0x281c, 0, 0xffff0000, 0x00000000 }, + { 0x2834, 0, 0xffffffff, 0x00000000 }, + { 0x2840, 0, 0x00000000, 0xffffffff }, + { 0x2844, 0, 0x00000000, 0xffffffff }, + { 0x2848, 0, 0xffffffff, 0x00000000 }, + { 0x284c, 0, 0xf800f800, 0x07ff07ff }, + + { 0x2c00, 0, 0x00000000, 0x00000011 }, + { 0x2c04, 0, 0x00000000, 0x00030007 }, + + { 0x3000, 0, 0x00000000, 0x00000001 }, + { 0x3004, 0, 0x00000000, 0x007007ff }, + { 0x3008, 0, 0x00000003, 0x00000000 }, + { 0x300c, 0, 0xffffffff, 0x00000000 }, + { 0x3010, 0, 0xffffffff, 0x00000000 }, + { 0x3014, 0, 0xffffffff, 0x00000000 }, + { 0x3034, 0, 0xffffffff, 0x00000000 }, + { 0x3038, 0, 0xffffffff, 0x00000000 }, + { 0x3050, 0, 0x00000001, 0x00000000 }, + + { 0x3c00, 0, 0x00000000, 0x00000001 }, + { 0x3c04, 0, 0x00000000, 0x00070000 }, + { 0x3c08, 0, 0x00007f71, 0x07f00000 }, + { 0x3c0c, 0, 0x1f3ffffc, 0x00000000 }, + { 0x3c10, 0, 0xffffffff, 0x00000000 }, + { 0x3c14, 0, 0x00000000, 0xffffffff }, + { 0x3c18, 0, 0x00000000, 0xffffffff }, + { 0x3c1c, 0, 0xfffff000, 0x00000000 }, + { 0x3c20, 0, 0xffffff00, 0x00000000 }, + { 0x3c24, 0, 0xffffffff, 0x00000000 }, + { 0x3c28, 0, 0xffffffff, 0x00000000 }, + { 0x3c2c, 0, 0xffffffff, 0x00000000 }, + { 0x3c30, 0, 0xffffffff, 0x00000000 }, + { 0x3c34, 0, 0xffffffff, 0x00000000 }, + { 0x3c38, 0, 0xffffffff, 0x00000000 }, + { 0x3c3c, 0, 0xffffffff, 0x00000000 }, + { 0x3c40, 0, 0xffffffff, 0x00000000 }, + { 0x3c44, 0, 0xffffffff, 0x00000000 }, + { 0x3c48, 0, 0xffffffff, 0x00000000 }, + { 0x3c4c, 0, 0xffffffff, 0x00000000 }, + { 0x3c50, 0, 0xffffffff, 0x00000000 }, + { 0x3c54, 0, 0xffffffff, 0x00000000 }, + { 0x3c58, 0, 0xffffffff, 0x00000000 }, + { 0x3c5c, 0, 0xffffffff, 0x00000000 }, + { 0x3c60, 0, 0xffffffff, 0x00000000 }, + { 0x3c64, 0, 0xffffffff, 0x00000000 }, + { 0x3c68, 0, 0xffffffff, 0x00000000 }, + { 0x3c6c, 0, 0xffffffff, 0x00000000 }, + { 0x3c70, 0, 0xffffffff, 0x00000000 }, + { 0x3c74, 0, 0x0000003f, 0x00000000 }, + { 0x3c78, 0, 0x00000000, 0x00000000 }, + { 0x3c7c, 0, 0x00000000, 0x00000000 }, + { 0x3c80, 0, 0x3fffffff, 0x00000000 }, + { 0x3c84, 0, 0x0000003f, 0x00000000 }, + { 0x3c88, 0, 0x00000000, 0xffffffff }, + { 0x3c8c, 0, 0x00000000, 0xffffffff }, + + { 0x4000, 0, 0x00000000, 0x00000001 }, + { 0x4004, 0, 0x00000000, 0x00030000 }, + { 0x4008, 0, 0x00000ff0, 0x00000000 }, + { 0x400c, 0, 0xffffffff, 0x00000000 }, + { 0x4088, 0, 0x00000000, 0x00070303 }, + + { 0x4400, 0, 0x00000000, 0x00000001 }, + { 0x4404, 0, 0x00000000, 0x00003f01 }, + { 0x4408, 0, 0x7fff00ff, 0x00000000 }, + { 0x440c, 0, 0xffffffff, 0x00000000 }, + { 0x4410, 0, 0xffff, 0x0000 }, + { 0x4414, 0, 0xffff, 0x0000 }, + { 0x4418, 0, 0xffff, 0x0000 }, + { 0x441c, 0, 0xffff, 0x0000 }, + { 0x4428, 0, 0xffffffff, 0x00000000 }, + { 0x442c, 0, 0xffffffff, 0x00000000 }, + { 0x4430, 0, 0xffffffff, 0x00000000 }, + { 0x4434, 0, 0xffffffff, 0x00000000 }, + { 0x4438, 0, 0xffffffff, 0x00000000 }, + { 0x443c, 0, 0xffffffff, 0x00000000 }, + { 0x4440, 0, 0xffffffff, 0x00000000 }, + { 0x4444, 0, 0xffffffff, 0x00000000 }, + + { 0x4c00, 0, 0x00000000, 0x00000001 }, + { 0x4c04, 0, 0x00000000, 0x0000003f }, + { 0x4c08, 0, 0xffffffff, 0x00000000 }, + { 0x4c0c, 0, 0x0007fc00, 0x00000000 }, + { 0x4c10, 0, 0x80003fe0, 0x00000000 }, + { 0x4c14, 0, 0xffffffff, 0x00000000 }, + { 0x4c44, 0, 0x00000000, 0x9fff9fff }, + { 0x4c48, 0, 0x00000000, 0xb3009fff }, + { 0x4c4c, 0, 0x00000000, 0x77f33b30 }, + { 0x4c50, 0, 0x00000000, 0xffffffff }, + + { 0x5004, 0, 0x00000000, 0x0000007f }, + { 0x5008, 0, 0x0f0007ff, 0x00000000 }, + { 0x500c, 0, 0xf800f800, 0x07ff07ff }, + + { 0x5400, 0, 0x00000008, 0x00000001 }, + { 0x5404, 0, 0x00000000, 0x0000003f }, + { 0x5408, 0, 0x0000001f, 0x00000000 }, + { 0x540c, 0, 0xffffffff, 0x00000000 }, + { 0x5410, 0, 0xffffffff, 0x00000000 }, + { 0x5414, 0, 0x0000ffff, 0x00000000 }, + { 0x5418, 0, 0x0000ffff, 0x00000000 }, + { 0x541c, 0, 0x0000ffff, 0x00000000 }, + { 0x5420, 0, 0x0000ffff, 0x00000000 }, + { 0x5428, 0, 0x000000ff, 0x00000000 }, + { 0x542c, 0, 0xff00ffff, 0x00000000 }, + { 0x5430, 0, 0x001fff80, 0x00000000 }, + { 0x5438, 0, 0xffffffff, 0x00000000 }, + { 0x543c, 0, 0xffffffff, 0x00000000 }, + { 0x5440, 0, 0xf800f800, 0x07ff07ff }, + + { 0x5c00, 0, 0x00000000, 0x00000001 }, + { 0x5c04, 0, 0x00000000, 0x0003000f }, + { 0x5c08, 0, 0x00000003, 0x00000000 }, + { 0x5c0c, 0, 0x0000fff8, 0x00000000 }, + { 0x5c10, 0, 0x00000000, 0xffffffff }, + { 0x5c80, 0, 0x00000000, 0x0f7113f1 }, + { 0x5c84, 0, 0x00000000, 0x0000f333 }, + { 0x5c88, 0, 0x00000000, 0x00077373 }, + { 0x5c8c, 0, 0x00000000, 0x0007f737 }, + + { 0x6808, 0, 0x0000ff7f, 0x00000000 }, + { 0x680c, 0, 0xffffffff, 0x00000000 }, + { 0x6810, 0, 0xffffffff, 0x00000000 }, + { 0x6814, 0, 0xffffffff, 0x00000000 }, + { 0x6818, 0, 0xffffffff, 0x00000000 }, + { 0x681c, 0, 0xffffffff, 0x00000000 }, + { 0x6820, 0, 0x00ff00ff, 0x00000000 }, + { 0x6824, 0, 0x00ff00ff, 0x00000000 }, + { 0x6828, 0, 0x00ff00ff, 0x00000000 }, + { 0x682c, 0, 0x03ff03ff, 0x00000000 }, + { 0x6830, 0, 0x03ff03ff, 0x00000000 }, + { 0x6834, 0, 0x03ff03ff, 0x00000000 }, + { 0x6838, 0, 0x03ff03ff, 0x00000000 }, + { 0x683c, 0, 0x0000ffff, 0x00000000 }, + { 0x6840, 0, 0x00000ff0, 0x00000000 }, + { 0x6844, 0, 0x00ffff00, 0x00000000 }, + { 0x684c, 0, 0xffffffff, 0x00000000 }, + { 0x6850, 0, 0x7f7f7f7f, 0x00000000 }, + { 0x6854, 0, 0x7f7f7f7f, 0x00000000 }, + { 0x6858, 0, 0x7f7f7f7f, 0x00000000 }, + { 0x685c, 0, 0x7f7f7f7f, 0x00000000 }, + { 0x6908, 0, 0x00000000, 0x0001ff0f }, + { 0x690c, 0, 0x00000000, 0x0ffe00f0 }, + + { 0xffff, 0, 0x00000000, 0x00000000 }, + }; + + ret = 0; + for (i = 0; reg_tbl[i].offset != 0xffff; i++) { + u32 offset, rw_mask, ro_mask, save_val, val; + + offset = (u32) reg_tbl[i].offset; + rw_mask = reg_tbl[i].rw_mask; + ro_mask = reg_tbl[i].ro_mask; + + save_val = readl((u8 *) bp->regview + offset); + + writel(0, (u8 *) bp->regview + offset); + + val = readl((u8 *) bp->regview + offset); + if ((val & rw_mask) != 0) { + goto reg_test_err; + } + + if ((val & ro_mask) != (save_val & ro_mask)) { + goto reg_test_err; + } + + writel(0xffffffff, (u8 *) bp->regview + offset); + + val = readl((u8 *) bp->regview + offset); + if ((val & rw_mask) != rw_mask) { + goto reg_test_err; + } + + if ((val & ro_mask) != (save_val & ro_mask)) { + goto reg_test_err; + } + + writel(save_val, (u8 *) bp->regview + offset); + continue; + +reg_test_err: + writel(save_val, (u8 *) bp->regview + offset); + ret = -ENODEV; + break; + } + return ret; +} + +static int +bnx2_do_mem_test(struct bnx2 *bp, u32 start, u32 size) +{ + static u32 test_pattern[] = { 0x00000000, 0xffffffff, 0x55555555, + 0xaaaaaaaa , 0xaa55aa55, 0x55aa55aa }; + int i; + + for (i = 0; i < sizeof(test_pattern) / 4; i++) { + u32 offset; + + for (offset = 0; offset < size; offset += 4) { + + REG_WR_IND(bp, start + offset, test_pattern[i]); + + if (REG_RD_IND(bp, start + offset) != + test_pattern[i]) { + return -ENODEV; + } + } + } + return 0; +} + +static int +bnx2_test_memory(struct bnx2 *bp) +{ + int ret = 0; + int i; + static struct { + u32 offset; + u32 len; + } mem_tbl[] = { + { 0x60000, 0x4000 }, + { 0xa0000, 0x4000 }, + { 0xe0000, 0x4000 }, + { 0x120000, 0x4000 }, + { 0x1a0000, 0x4000 }, + { 0x160000, 0x4000 }, + { 0xffffffff, 0 }, + }; + + for (i = 0; mem_tbl[i].offset != 0xffffffff; i++) { + if ((ret = bnx2_do_mem_test(bp, mem_tbl[i].offset, + mem_tbl[i].len)) != 0) { + return ret; + } + } + + return ret; +} + +static int +bnx2_test_loopback(struct bnx2 *bp) +{ + unsigned int pkt_size, num_pkts, i; + struct sk_buff *skb, *rx_skb; + unsigned char *packet; + u16 rx_start_idx, rx_idx, send_idx; + u32 send_bseq, val; + dma_addr_t map; + struct tx_bd *txbd; + struct sw_bd *rx_buf; + struct l2_fhdr *rx_hdr; + int ret = -ENODEV; + + if (!netif_running(bp->dev)) + return -ENODEV; + + bp->loopback = MAC_LOOPBACK; + bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_DIAG); + bnx2_set_mac_loopback(bp); + + pkt_size = 1514; + skb = dev_alloc_skb(pkt_size); + packet = skb_put(skb, pkt_size); + memcpy(packet, bp->mac_addr, 6); + memset(packet + 6, 0x0, 8); + for (i = 14; i < pkt_size; i++) + packet[i] = (unsigned char) (i & 0xff); + + map = pci_map_single(bp->pdev, skb->data, pkt_size, + PCI_DMA_TODEVICE); + + val = REG_RD(bp, BNX2_HC_COMMAND); + REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW_WO_INT); + REG_RD(bp, BNX2_HC_COMMAND); + + udelay(5); + rx_start_idx = bp->status_blk->status_rx_quick_consumer_index0; + + send_idx = 0; + send_bseq = 0; + num_pkts = 0; + + txbd = &bp->tx_desc_ring[send_idx]; + + txbd->tx_bd_haddr_hi = (u64) map >> 32; + txbd->tx_bd_haddr_lo = (u64) map & 0xffffffff; + txbd->tx_bd_mss_nbytes = pkt_size; + txbd->tx_bd_vlan_tag_flags = TX_BD_FLAGS_START | TX_BD_FLAGS_END; + + num_pkts++; + send_idx = NEXT_TX_BD(send_idx); + + send_bseq += pkt_size; + + REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, send_idx); + REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, send_bseq); + + + udelay(100); + + val = REG_RD(bp, BNX2_HC_COMMAND); + REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW_WO_INT); + REG_RD(bp, BNX2_HC_COMMAND); + + udelay(5); + + pci_unmap_single(bp->pdev, map, pkt_size, PCI_DMA_TODEVICE); + dev_kfree_skb_irq(skb); + + if (bp->status_blk->status_tx_quick_consumer_index0 != send_idx) { + goto loopback_test_done; + } + + rx_idx = bp->status_blk->status_rx_quick_consumer_index0; + if (rx_idx != rx_start_idx + num_pkts) { + goto loopback_test_done; + } + + rx_buf = &bp->rx_buf_ring[rx_start_idx]; + rx_skb = rx_buf->skb; + + rx_hdr = (struct l2_fhdr *) rx_skb->data; + skb_reserve(rx_skb, bp->rx_offset); + + pci_dma_sync_single_for_cpu(bp->pdev, + pci_unmap_addr(rx_buf, mapping), + bp->rx_buf_size, PCI_DMA_FROMDEVICE); + + if (rx_hdr->l2_fhdr_errors & + (L2_FHDR_ERRORS_BAD_CRC | + L2_FHDR_ERRORS_PHY_DECODE | + L2_FHDR_ERRORS_ALIGNMENT | + L2_FHDR_ERRORS_TOO_SHORT | + L2_FHDR_ERRORS_GIANT_FRAME)) { + + goto loopback_test_done; + } + + if ((rx_hdr->l2_fhdr_pkt_len - 4) != pkt_size) { + goto loopback_test_done; + } + + for (i = 14; i < pkt_size; i++) { + if (*(rx_skb->data + i) != (unsigned char) (i & 0xff)) { + goto loopback_test_done; + } + } + + ret = 0; + +loopback_test_done: + bp->loopback = 0; + return ret; +} + +#define NVRAM_SIZE 0x200 +#define CRC32_RESIDUAL 0xdebb20e3 + +static int +bnx2_test_nvram(struct bnx2 *bp) +{ + u32 buf[NVRAM_SIZE / 4]; + u8 *data = (u8 *) buf; + int rc = 0; + u32 magic, csum; + + if ((rc = bnx2_nvram_read(bp, 0, data, 4)) != 0) + goto test_nvram_done; + + magic = be32_to_cpu(buf[0]); + if (magic != 0x669955aa) { + rc = -ENODEV; + goto test_nvram_done; + } + + if ((rc = bnx2_nvram_read(bp, 0x100, data, NVRAM_SIZE)) != 0) + goto test_nvram_done; + + csum = ether_crc_le(0x100, data); + if (csum != CRC32_RESIDUAL) { + rc = -ENODEV; + goto test_nvram_done; + } + + csum = ether_crc_le(0x100, data + 0x100); + if (csum != CRC32_RESIDUAL) { + rc = -ENODEV; + } + +test_nvram_done: + return rc; +} + +static int +bnx2_test_link(struct bnx2 *bp) +{ + u32 bmsr; + + spin_lock_irq(&bp->phy_lock); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + spin_unlock_irq(&bp->phy_lock); + + if (bmsr & BMSR_LSTATUS) { + return 0; + } + return -ENODEV; +} + +static int +bnx2_test_intr(struct bnx2 *bp) +{ + int i; + u32 val; + u16 status_idx; + + if (!netif_running(bp->dev)) + return -ENODEV; + + status_idx = REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD) & 0xffff; + + /* This register is not touched during run-time. */ + val = REG_RD(bp, BNX2_HC_COMMAND); + REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW); + REG_RD(bp, BNX2_HC_COMMAND); + + for (i = 0; i < 10; i++) { + if ((REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD) & 0xffff) != + status_idx) { + + break; + } + + msleep_interruptible(10); + } + if (i < 10) + return 0; + + return -ENODEV; +} + +static void +bnx2_timer(unsigned long data) +{ + struct bnx2 *bp = (struct bnx2 *) data; + u32 msg; + + if (atomic_read(&bp->intr_sem) != 0) + goto bnx2_restart_timer; + + msg = (u32) ++bp->fw_drv_pulse_wr_seq; + REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_PULSE_MB, msg); + + if ((bp->phy_flags & PHY_SERDES_FLAG) && + (CHIP_NUM(bp) == CHIP_NUM_5706)) { + unsigned long flags; + + spin_lock_irqsave(&bp->phy_lock, flags); + if (bp->serdes_an_pending) { + bp->serdes_an_pending--; + } + else if ((bp->link_up == 0) && (bp->autoneg & AUTONEG_SPEED)) { + u32 bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + + if (bmcr & BMCR_ANENABLE) { + u32 phy1, phy2; + + bnx2_write_phy(bp, 0x1c, 0x7c00); + bnx2_read_phy(bp, 0x1c, &phy1); + + bnx2_write_phy(bp, 0x17, 0x0f01); + bnx2_read_phy(bp, 0x15, &phy2); + bnx2_write_phy(bp, 0x17, 0x0f01); + bnx2_read_phy(bp, 0x15, &phy2); + + if ((phy1 & 0x10) && /* SIGNAL DETECT */ + !(phy2 & 0x20)) { /* no CONFIG */ + + bmcr &= ~BMCR_ANENABLE; + bmcr |= BMCR_SPEED1000 | + BMCR_FULLDPLX; + bnx2_write_phy(bp, MII_BMCR, bmcr); + bp->phy_flags |= + PHY_PARALLEL_DETECT_FLAG; + } + } + } + else if ((bp->link_up) && (bp->autoneg & AUTONEG_SPEED) && + (bp->phy_flags & PHY_PARALLEL_DETECT_FLAG)) { + u32 phy2; + + bnx2_write_phy(bp, 0x17, 0x0f01); + bnx2_read_phy(bp, 0x15, &phy2); + if (phy2 & 0x20) { + u32 bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + bmcr |= BMCR_ANENABLE; + bnx2_write_phy(bp, MII_BMCR, bmcr); + + bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG; + + } + } + + spin_unlock_irqrestore(&bp->phy_lock, flags); + } + +bnx2_restart_timer: + bp->timer.expires = RUN_AT(bp->timer_interval); + + add_timer(&bp->timer); +} + +/* Called with rtnl_lock */ +static int +bnx2_open(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + int rc; + + bnx2_set_power_state(bp, 0); + bnx2_disable_int(bp); + + rc = bnx2_alloc_mem(bp); + if (rc) + return rc; + + if ((CHIP_ID(bp) != CHIP_ID_5706_A0) && + (CHIP_ID(bp) != CHIP_ID_5706_A1) && + !disable_msi) { + + if (pci_enable_msi(bp->pdev) == 0) { + bp->flags |= USING_MSI_FLAG; + rc = request_irq(bp->pdev->irq, bnx2_msi, 0, dev->name, + dev); + } + else { + rc = request_irq(bp->pdev->irq, bnx2_interrupt, + SA_SHIRQ, dev->name, dev); + } + } + else { + rc = request_irq(bp->pdev->irq, bnx2_interrupt, SA_SHIRQ, + dev->name, dev); + } + if (rc) { + bnx2_free_mem(bp); + return rc; + } + + rc = bnx2_init_nic(bp); + + if (rc) { + free_irq(bp->pdev->irq, dev); + if (bp->flags & USING_MSI_FLAG) { + pci_disable_msi(bp->pdev); + bp->flags &= ~USING_MSI_FLAG; + } + bnx2_free_skbs(bp); + bnx2_free_mem(bp); + return rc; + } + + init_timer(&bp->timer); + + bp->timer.expires = RUN_AT(bp->timer_interval); + bp->timer.data = (unsigned long) bp; + bp->timer.function = bnx2_timer; + add_timer(&bp->timer); + + atomic_set(&bp->intr_sem, 0); + + bnx2_enable_int(bp); + + if (bp->flags & USING_MSI_FLAG) { + /* Test MSI to make sure it is working + * If MSI test fails, go back to INTx mode + */ + if (bnx2_test_intr(bp) != 0) { + printk(KERN_WARNING PFX "%s: No interrupt was generated" + " using MSI, switching to INTx mode. Please" + " report this failure to the PCI maintainer" + " and include system chipset information.\n", + bp->dev->name); + + bnx2_disable_int(bp); + free_irq(bp->pdev->irq, dev); + pci_disable_msi(bp->pdev); + bp->flags &= ~USING_MSI_FLAG; + + rc = bnx2_init_nic(bp); + + if (!rc) { + rc = request_irq(bp->pdev->irq, bnx2_interrupt, + SA_SHIRQ, dev->name, dev); + } + if (rc) { + bnx2_free_skbs(bp); + bnx2_free_mem(bp); + del_timer_sync(&bp->timer); + return rc; + } + bnx2_enable_int(bp); + } + } + if (bp->flags & USING_MSI_FLAG) { + printk(KERN_INFO PFX "%s: using MSI\n", dev->name); + } + + netif_start_queue(dev); + + return 0; +} + +static void +bnx2_reset_task(void *data) +{ + struct bnx2 *bp = data; + + bnx2_netif_stop(bp); + + bnx2_init_nic(bp); + + atomic_set(&bp->intr_sem, 1); + bnx2_netif_start(bp); +} + +static void +bnx2_tx_timeout(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + + /* This allows the netif to be shutdown gracefully before resetting */ + schedule_work(&bp->reset_task); +} + +#ifdef BCM_VLAN +/* Called with rtnl_lock */ +static void +bnx2_vlan_rx_register(struct net_device *dev, struct vlan_group *vlgrp) +{ + struct bnx2 *bp = dev->priv; + + bnx2_netif_stop(bp); + + bp->vlgrp = vlgrp; + bnx2_set_rx_mode(dev); + + bnx2_netif_start(bp); +} + +/* Called with rtnl_lock */ +static void +bnx2_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid) +{ + struct bnx2 *bp = dev->priv; + + bnx2_netif_stop(bp); + + if (bp->vlgrp) + bp->vlgrp->vlan_devices[vid] = NULL; + bnx2_set_rx_mode(dev); + + bnx2_netif_start(bp); +} +#endif + +/* Called with dev->xmit_lock. + * hard_start_xmit is pseudo-lockless - a lock is only required when + * the tx queue is full. This way, we get the benefit of lockless + * operations most of the time without the complexities to handle + * netif_stop_queue/wake_queue race conditions. + */ +static int +bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + dma_addr_t mapping; + struct tx_bd *txbd; + struct sw_bd *tx_buf; + u32 len, vlan_tag_flags, last_frag, mss; + u16 prod, ring_prod; + int i; + + if (unlikely(atomic_read(&bp->tx_avail_bd) < + (skb_shinfo(skb)->nr_frags + 1))) { + + netif_stop_queue(dev); + printk(KERN_ERR PFX "%s: BUG! Tx ring full when queue awake!\n", + dev->name); + + return NETDEV_TX_BUSY; + } + len = skb_headlen(skb); + prod = bp->tx_prod; + ring_prod = TX_RING_IDX(prod); + + vlan_tag_flags = 0; + if (skb->ip_summed == CHECKSUM_HW) { + vlan_tag_flags |= TX_BD_FLAGS_TCP_UDP_CKSUM; + } + + if (bp->vlgrp != 0 && vlan_tx_tag_present(skb)) { + vlan_tag_flags |= + (TX_BD_FLAGS_VLAN_TAG | (vlan_tx_tag_get(skb) << 16)); + } +#ifdef BCM_TSO + if ((mss = skb_shinfo(skb)->tso_size) && + (skb->len > (bp->dev->mtu + ETH_HLEN))) { + u32 tcp_opt_len, ip_tcp_len; + + if (skb_header_cloned(skb) && + pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) { + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + tcp_opt_len = ((skb->h.th->doff - 5) * 4); + vlan_tag_flags |= TX_BD_FLAGS_SW_LSO; + + tcp_opt_len = 0; + if (skb->h.th->doff > 5) { + tcp_opt_len = (skb->h.th->doff - 5) << 2; + } + ip_tcp_len = (skb->nh.iph->ihl << 2) + sizeof(struct tcphdr); + + skb->nh.iph->check = 0; + skb->nh.iph->tot_len = ntohs(mss + ip_tcp_len + tcp_opt_len); + skb->h.th->check = + ~csum_tcpudp_magic(skb->nh.iph->saddr, + skb->nh.iph->daddr, + 0, IPPROTO_TCP, 0); + + if (tcp_opt_len || (skb->nh.iph->ihl > 5)) { + vlan_tag_flags |= ((skb->nh.iph->ihl - 5) + + (tcp_opt_len >> 2)) << 8; + } + } + else +#endif + { + mss = 0; + } + + mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE); + + tx_buf = &bp->tx_buf_ring[ring_prod]; + tx_buf->skb = skb; + pci_unmap_addr_set(tx_buf, mapping, mapping); + + txbd = &bp->tx_desc_ring[ring_prod]; + + txbd->tx_bd_haddr_hi = (u64) mapping >> 32; + txbd->tx_bd_haddr_lo = (u64) mapping & 0xffffffff; + txbd->tx_bd_mss_nbytes = len | (mss << 16); + txbd->tx_bd_vlan_tag_flags = vlan_tag_flags | TX_BD_FLAGS_START; + + last_frag = skb_shinfo(skb)->nr_frags; + + for (i = 0; i < last_frag; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + prod = NEXT_TX_BD(prod); + ring_prod = TX_RING_IDX(prod); + txbd = &bp->tx_desc_ring[ring_prod]; + + len = frag->size; + mapping = pci_map_page(bp->pdev, frag->page, frag->page_offset, + len, PCI_DMA_TODEVICE); + pci_unmap_addr_set(&bp->tx_buf_ring[ring_prod], + mapping, mapping); + + txbd->tx_bd_haddr_hi = (u64) mapping >> 32; + txbd->tx_bd_haddr_lo = (u64) mapping & 0xffffffff; + txbd->tx_bd_mss_nbytes = len | (mss << 16); + txbd->tx_bd_vlan_tag_flags = vlan_tag_flags; + + } + txbd->tx_bd_vlan_tag_flags |= TX_BD_FLAGS_END; + + prod = NEXT_TX_BD(prod); + bp->tx_prod_bseq += skb->len; + + atomic_sub(last_frag + 1, &bp->tx_avail_bd); + + REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, prod); + REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, bp->tx_prod_bseq); + + mmiowb(); + + bp->tx_prod = prod; + dev->trans_start = jiffies; + + if (unlikely(atomic_read(&bp->tx_avail_bd) <= MAX_SKB_FRAGS)) { + unsigned long flags; + + spin_lock_irqsave(&bp->tx_lock, flags); + if (atomic_read(&bp->tx_avail_bd) <= MAX_SKB_FRAGS) { + netif_stop_queue(dev); + + if (atomic_read(&bp->tx_avail_bd) > MAX_SKB_FRAGS) + netif_wake_queue(dev); + } + spin_unlock_irqrestore(&bp->tx_lock, flags); + } + + return NETDEV_TX_OK; +} + +/* Called with rtnl_lock */ +static int +bnx2_close(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + u32 reset_code; + + flush_scheduled_work(); + bnx2_netif_stop(bp); + del_timer_sync(&bp->timer); + if (bp->wol) + reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL; + else + reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL; + bnx2_reset_chip(bp, reset_code); + free_irq(bp->pdev->irq, dev); + if (bp->flags & USING_MSI_FLAG) { + pci_disable_msi(bp->pdev); + bp->flags &= ~USING_MSI_FLAG; + } + bnx2_free_skbs(bp); + bnx2_free_mem(bp); + bp->link_up = 0; + netif_carrier_off(bp->dev); + bnx2_set_power_state(bp, 3); + return 0; +} + +#define GET_NET_STATS64(ctr) \ + (unsigned long) ((unsigned long) (ctr##_hi) << 32) + \ + (unsigned long) (ctr##_lo) + +#define GET_NET_STATS32(ctr) \ + (ctr##_lo) + +#if (BITS_PER_LONG == 64) +#define GET_NET_STATS GET_NET_STATS64 +#else +#define GET_NET_STATS GET_NET_STATS32 +#endif + +static struct net_device_stats * +bnx2_get_stats(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + struct statistics_block *stats_blk = bp->stats_blk; + struct net_device_stats *net_stats = &bp->net_stats; + + if (bp->stats_blk == NULL) { + return net_stats; + } + net_stats->rx_packets = + GET_NET_STATS(stats_blk->stat_IfHCInUcastPkts) + + GET_NET_STATS(stats_blk->stat_IfHCInMulticastPkts) + + GET_NET_STATS(stats_blk->stat_IfHCInBroadcastPkts); + + net_stats->tx_packets = + GET_NET_STATS(stats_blk->stat_IfHCOutUcastPkts) + + GET_NET_STATS(stats_blk->stat_IfHCOutMulticastPkts) + + GET_NET_STATS(stats_blk->stat_IfHCOutBroadcastPkts); + + net_stats->rx_bytes = + GET_NET_STATS(stats_blk->stat_IfHCInOctets); + + net_stats->tx_bytes = + GET_NET_STATS(stats_blk->stat_IfHCOutOctets); + + net_stats->multicast = + GET_NET_STATS(stats_blk->stat_IfHCOutMulticastPkts); + + net_stats->collisions = + (unsigned long) stats_blk->stat_EtherStatsCollisions; + + net_stats->rx_length_errors = + (unsigned long) (stats_blk->stat_EtherStatsUndersizePkts + + stats_blk->stat_EtherStatsOverrsizePkts); + + net_stats->rx_over_errors = + (unsigned long) stats_blk->stat_IfInMBUFDiscards; + + net_stats->rx_frame_errors = + (unsigned long) stats_blk->stat_Dot3StatsAlignmentErrors; + + net_stats->rx_crc_errors = + (unsigned long) stats_blk->stat_Dot3StatsFCSErrors; + + net_stats->rx_errors = net_stats->rx_length_errors + + net_stats->rx_over_errors + net_stats->rx_frame_errors + + net_stats->rx_crc_errors; + + net_stats->tx_aborted_errors = + (unsigned long) (stats_blk->stat_Dot3StatsExcessiveCollisions + + stats_blk->stat_Dot3StatsLateCollisions); + + if (CHIP_NUM(bp) == CHIP_NUM_5706) + net_stats->tx_carrier_errors = 0; + else { + net_stats->tx_carrier_errors = + (unsigned long) + stats_blk->stat_Dot3StatsCarrierSenseErrors; + } + + net_stats->tx_errors = + (unsigned long) + stats_blk->stat_emac_tx_stat_dot3statsinternalmactransmiterrors + + + net_stats->tx_aborted_errors + + net_stats->tx_carrier_errors; + + return net_stats; +} + +/* All ethtool functions called with rtnl_lock */ + +static int +bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct bnx2 *bp = dev->priv; + + cmd->supported = SUPPORTED_Autoneg; + if (bp->phy_flags & PHY_SERDES_FLAG) { + cmd->supported |= SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE; + + cmd->port = PORT_FIBRE; + } + else { + cmd->supported |= SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_TP; + + cmd->port = PORT_TP; + } + + cmd->advertising = bp->advertising; + + if (bp->autoneg & AUTONEG_SPEED) { + cmd->autoneg = AUTONEG_ENABLE; + } + else { + cmd->autoneg = AUTONEG_DISABLE; + } + + if (netif_carrier_ok(dev)) { + cmd->speed = bp->line_speed; + cmd->duplex = bp->duplex; + } + else { + cmd->speed = -1; + cmd->duplex = -1; + } + + cmd->transceiver = XCVR_INTERNAL; + cmd->phy_address = bp->phy_addr; + + return 0; +} + +static int +bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct bnx2 *bp = dev->priv; + u8 autoneg = bp->autoneg; + u8 req_duplex = bp->req_duplex; + u16 req_line_speed = bp->req_line_speed; + u32 advertising = bp->advertising; + + if (cmd->autoneg == AUTONEG_ENABLE) { + autoneg |= AUTONEG_SPEED; + + cmd->advertising &= ETHTOOL_ALL_COPPER_SPEED; + + /* allow advertising 1 speed */ + if ((cmd->advertising == ADVERTISED_10baseT_Half) || + (cmd->advertising == ADVERTISED_10baseT_Full) || + (cmd->advertising == ADVERTISED_100baseT_Half) || + (cmd->advertising == ADVERTISED_100baseT_Full)) { + + if (bp->phy_flags & PHY_SERDES_FLAG) + return -EINVAL; + + advertising = cmd->advertising; + + } + else if (cmd->advertising == ADVERTISED_1000baseT_Full) { + advertising = cmd->advertising; + } + else if (cmd->advertising == ADVERTISED_1000baseT_Half) { + return -EINVAL; + } + else { + if (bp->phy_flags & PHY_SERDES_FLAG) { + advertising = ETHTOOL_ALL_FIBRE_SPEED; + } + else { + advertising = ETHTOOL_ALL_COPPER_SPEED; + } + } + advertising |= ADVERTISED_Autoneg; + } + else { + if (bp->phy_flags & PHY_SERDES_FLAG) { + if ((cmd->speed != SPEED_1000) || + (cmd->duplex != DUPLEX_FULL)) { + return -EINVAL; + } + } + else if (cmd->speed == SPEED_1000) { + return -EINVAL; + } + autoneg &= ~AUTONEG_SPEED; + req_line_speed = cmd->speed; + req_duplex = cmd->duplex; + advertising = 0; + } + + bp->autoneg = autoneg; + bp->advertising = advertising; + bp->req_line_speed = req_line_speed; + bp->req_duplex = req_duplex; + + spin_lock_irq(&bp->phy_lock); + + bnx2_setup_phy(bp); + + spin_unlock_irq(&bp->phy_lock); + + return 0; +} + +static void +bnx2_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct bnx2 *bp = dev->priv; + + strcpy(info->driver, DRV_MODULE_NAME); + strcpy(info->version, DRV_MODULE_VERSION); + strcpy(info->bus_info, pci_name(bp->pdev)); + info->fw_version[0] = ((bp->fw_ver & 0xff000000) >> 24) + '0'; + info->fw_version[2] = ((bp->fw_ver & 0xff0000) >> 16) + '0'; + info->fw_version[4] = ((bp->fw_ver & 0xff00) >> 8) + '0'; + info->fw_version[6] = (bp->fw_ver & 0xff) + '0'; + info->fw_version[1] = info->fw_version[3] = info->fw_version[5] = '.'; + info->fw_version[7] = 0; +} + +static void +bnx2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct bnx2 *bp = dev->priv; + + if (bp->flags & NO_WOL_FLAG) { + wol->supported = 0; + wol->wolopts = 0; + } + else { + wol->supported = WAKE_MAGIC; + if (bp->wol) + wol->wolopts = WAKE_MAGIC; + else + wol->wolopts = 0; + } + memset(&wol->sopass, 0, sizeof(wol->sopass)); +} + +static int +bnx2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct bnx2 *bp = dev->priv; + + if (wol->wolopts & ~WAKE_MAGIC) + return -EINVAL; + + if (wol->wolopts & WAKE_MAGIC) { + if (bp->flags & NO_WOL_FLAG) + return -EINVAL; + + bp->wol = 1; + } + else { + bp->wol = 0; + } + return 0; +} + +static int +bnx2_nway_reset(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + u32 bmcr; + + if (!(bp->autoneg & AUTONEG_SPEED)) { + return -EINVAL; + } + + spin_lock_irq(&bp->phy_lock); + + /* Force a link down visible on the other side */ + if (bp->phy_flags & PHY_SERDES_FLAG) { + bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK); + spin_unlock_irq(&bp->phy_lock); + + msleep(20); + + spin_lock_irq(&bp->phy_lock); + if (CHIP_NUM(bp) == CHIP_NUM_5706) { + bp->serdes_an_pending = SERDES_AN_TIMEOUT / + bp->timer_interval; + } + } + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + bmcr &= ~BMCR_LOOPBACK; + bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART | BMCR_ANENABLE); + + spin_unlock_irq(&bp->phy_lock); + + return 0; +} + +static int +bnx2_get_eeprom_len(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + + if (bp->flash_info == 0) + return 0; + + return (int) bp->flash_info->total_size; +} + +static int +bnx2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, + u8 *eebuf) +{ + struct bnx2 *bp = dev->priv; + int rc; + + if (eeprom->offset > bp->flash_info->total_size) + return -EINVAL; + + if ((eeprom->offset + eeprom->len) > bp->flash_info->total_size) + eeprom->len = bp->flash_info->total_size - eeprom->offset; + + rc = bnx2_nvram_read(bp, eeprom->offset, eebuf, eeprom->len); + + return rc; +} + +static int +bnx2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, + u8 *eebuf) +{ + struct bnx2 *bp = dev->priv; + int rc; + + if (eeprom->offset > bp->flash_info->total_size) + return -EINVAL; + + if ((eeprom->offset + eeprom->len) > bp->flash_info->total_size) + eeprom->len = bp->flash_info->total_size - eeprom->offset; + + rc = bnx2_nvram_write(bp, eeprom->offset, eebuf, eeprom->len); + + return rc; +} + +static int +bnx2_get_coalesce(struct net_device *dev, struct ethtool_coalesce *coal) +{ + struct bnx2 *bp = dev->priv; + + memset(coal, 0, sizeof(struct ethtool_coalesce)); + + coal->rx_coalesce_usecs = bp->rx_ticks; + coal->rx_max_coalesced_frames = bp->rx_quick_cons_trip; + coal->rx_coalesce_usecs_irq = bp->rx_ticks_int; + coal->rx_max_coalesced_frames_irq = bp->rx_quick_cons_trip_int; + + coal->tx_coalesce_usecs = bp->tx_ticks; + coal->tx_max_coalesced_frames = bp->tx_quick_cons_trip; + coal->tx_coalesce_usecs_irq = bp->tx_ticks_int; + coal->tx_max_coalesced_frames_irq = bp->tx_quick_cons_trip_int; + + coal->stats_block_coalesce_usecs = bp->stats_ticks; + + return 0; +} + +static int +bnx2_set_coalesce(struct net_device *dev, struct ethtool_coalesce *coal) +{ + struct bnx2 *bp = dev->priv; + + bp->rx_ticks = (u16) coal->rx_coalesce_usecs; + if (bp->rx_ticks > 0x3ff) bp->rx_ticks = 0x3ff; + + bp->rx_quick_cons_trip = (u16) coal->rx_max_coalesced_frames; + if (bp->rx_quick_cons_trip > 0xff) bp->rx_quick_cons_trip = 0xff; + + bp->rx_ticks_int = (u16) coal->rx_coalesce_usecs_irq; + if (bp->rx_ticks_int > 0x3ff) bp->rx_ticks_int = 0x3ff; + + bp->rx_quick_cons_trip_int = (u16) coal->rx_max_coalesced_frames_irq; + if (bp->rx_quick_cons_trip_int > 0xff) + bp->rx_quick_cons_trip_int = 0xff; + + bp->tx_ticks = (u16) coal->tx_coalesce_usecs; + if (bp->tx_ticks > 0x3ff) bp->tx_ticks = 0x3ff; + + bp->tx_quick_cons_trip = (u16) coal->tx_max_coalesced_frames; + if (bp->tx_quick_cons_trip > 0xff) bp->tx_quick_cons_trip = 0xff; + + bp->tx_ticks_int = (u16) coal->tx_coalesce_usecs_irq; + if (bp->tx_ticks_int > 0x3ff) bp->tx_ticks_int = 0x3ff; + + bp->tx_quick_cons_trip_int = (u16) coal->tx_max_coalesced_frames_irq; + if (bp->tx_quick_cons_trip_int > 0xff) bp->tx_quick_cons_trip_int = + 0xff; + + bp->stats_ticks = coal->stats_block_coalesce_usecs; + if (bp->stats_ticks > 0xffff00) bp->stats_ticks = 0xffff00; + bp->stats_ticks &= 0xffff00; + + if (netif_running(bp->dev)) { + bnx2_netif_stop(bp); + bnx2_init_nic(bp); + bnx2_netif_start(bp); + } + + return 0; +} + +static void +bnx2_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) +{ + struct bnx2 *bp = dev->priv; + + ering->rx_max_pending = MAX_RX_DESC_CNT; + ering->rx_mini_max_pending = 0; + ering->rx_jumbo_max_pending = 0; + + ering->rx_pending = bp->rx_ring_size; + ering->rx_mini_pending = 0; + ering->rx_jumbo_pending = 0; + + ering->tx_max_pending = MAX_TX_DESC_CNT; + ering->tx_pending = bp->tx_ring_size; +} + +static int +bnx2_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) +{ + struct bnx2 *bp = dev->priv; + + if ((ering->rx_pending > MAX_RX_DESC_CNT) || + (ering->tx_pending > MAX_TX_DESC_CNT) || + (ering->tx_pending <= MAX_SKB_FRAGS)) { + + return -EINVAL; + } + bp->rx_ring_size = ering->rx_pending; + bp->tx_ring_size = ering->tx_pending; + + if (netif_running(bp->dev)) { + bnx2_netif_stop(bp); + bnx2_init_nic(bp); + bnx2_netif_start(bp); + } + + return 0; +} + +static void +bnx2_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause) +{ + struct bnx2 *bp = dev->priv; + + epause->autoneg = ((bp->autoneg & AUTONEG_FLOW_CTRL) != 0); + epause->rx_pause = ((bp->flow_ctrl & FLOW_CTRL_RX) != 0); + epause->tx_pause = ((bp->flow_ctrl & FLOW_CTRL_TX) != 0); +} + +static int +bnx2_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause) +{ + struct bnx2 *bp = dev->priv; + + bp->req_flow_ctrl = 0; + if (epause->rx_pause) + bp->req_flow_ctrl |= FLOW_CTRL_RX; + if (epause->tx_pause) + bp->req_flow_ctrl |= FLOW_CTRL_TX; + + if (epause->autoneg) { + bp->autoneg |= AUTONEG_FLOW_CTRL; + } + else { + bp->autoneg &= ~AUTONEG_FLOW_CTRL; + } + + spin_lock_irq(&bp->phy_lock); + + bnx2_setup_phy(bp); + + spin_unlock_irq(&bp->phy_lock); + + return 0; +} + +static u32 +bnx2_get_rx_csum(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + + return bp->rx_csum; +} + +static int +bnx2_set_rx_csum(struct net_device *dev, u32 data) +{ + struct bnx2 *bp = dev->priv; + + bp->rx_csum = data; + return 0; +} + +#define BNX2_NUM_STATS 45 + +struct { + char string[ETH_GSTRING_LEN]; +} bnx2_stats_str_arr[BNX2_NUM_STATS] = { + { "rx_bytes" }, + { "rx_error_bytes" }, + { "tx_bytes" }, + { "tx_error_bytes" }, + { "rx_ucast_packets" }, + { "rx_mcast_packets" }, + { "rx_bcast_packets" }, + { "tx_ucast_packets" }, + { "tx_mcast_packets" }, + { "tx_bcast_packets" }, + { "tx_mac_errors" }, + { "tx_carrier_errors" }, + { "rx_crc_errors" }, + { "rx_align_errors" }, + { "tx_single_collisions" }, + { "tx_multi_collisions" }, + { "tx_deferred" }, + { "tx_excess_collisions" }, + { "tx_late_collisions" }, + { "tx_total_collisions" }, + { "rx_fragments" }, + { "rx_jabbers" }, + { "rx_undersize_packets" }, + { "rx_oversize_packets" }, + { "rx_64_byte_packets" }, + { "rx_65_to_127_byte_packets" }, + { "rx_128_to_255_byte_packets" }, + { "rx_256_to_511_byte_packets" }, + { "rx_512_to_1023_byte_packets" }, + { "rx_1024_to_1522_byte_packets" }, + { "rx_1523_to_9022_byte_packets" }, + { "tx_64_byte_packets" }, + { "tx_65_to_127_byte_packets" }, + { "tx_128_to_255_byte_packets" }, + { "tx_256_to_511_byte_packets" }, + { "tx_512_to_1023_byte_packets" }, + { "tx_1024_to_1522_byte_packets" }, + { "tx_1523_to_9022_byte_packets" }, + { "rx_xon_frames" }, + { "rx_xoff_frames" }, + { "tx_xon_frames" }, + { "tx_xoff_frames" }, + { "rx_mac_ctrl_frames" }, + { "rx_filtered_packets" }, + { "rx_discards" }, +}; + +#define STATS_OFFSET32(offset_name) (offsetof(struct statistics_block, offset_name) / 4) + +unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = { + STATS_OFFSET32(stat_IfHCInOctets_hi), + STATS_OFFSET32(stat_IfHCInBadOctets_hi), + STATS_OFFSET32(stat_IfHCOutOctets_hi), + STATS_OFFSET32(stat_IfHCOutBadOctets_hi), + STATS_OFFSET32(stat_IfHCInUcastPkts_hi), + STATS_OFFSET32(stat_IfHCInMulticastPkts_hi), + STATS_OFFSET32(stat_IfHCInBroadcastPkts_hi), + STATS_OFFSET32(stat_IfHCOutUcastPkts_hi), + STATS_OFFSET32(stat_IfHCOutMulticastPkts_hi), + STATS_OFFSET32(stat_IfHCOutBroadcastPkts_hi), + STATS_OFFSET32(stat_emac_tx_stat_dot3statsinternalmactransmiterrors), + STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors), + STATS_OFFSET32(stat_Dot3StatsFCSErrors), + STATS_OFFSET32(stat_Dot3StatsAlignmentErrors), + STATS_OFFSET32(stat_Dot3StatsSingleCollisionFrames), + STATS_OFFSET32(stat_Dot3StatsMultipleCollisionFrames), + STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions), + STATS_OFFSET32(stat_Dot3StatsExcessiveCollisions), + STATS_OFFSET32(stat_Dot3StatsLateCollisions), + STATS_OFFSET32(stat_EtherStatsCollisions), + STATS_OFFSET32(stat_EtherStatsFragments), + STATS_OFFSET32(stat_EtherStatsJabbers), + STATS_OFFSET32(stat_EtherStatsUndersizePkts), + STATS_OFFSET32(stat_EtherStatsOverrsizePkts), + STATS_OFFSET32(stat_EtherStatsPktsRx64Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx65Octetsto127Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx128Octetsto255Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx256Octetsto511Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx512Octetsto1023Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx1024Octetsto1522Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx1523Octetsto9022Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx64Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx65Octetsto127Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx128Octetsto255Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx256Octetsto511Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx512Octetsto1023Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx1024Octetsto1522Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx1523Octetsto9022Octets), + STATS_OFFSET32(stat_XonPauseFramesReceived), + STATS_OFFSET32(stat_XoffPauseFramesReceived), + STATS_OFFSET32(stat_OutXonSent), + STATS_OFFSET32(stat_OutXoffSent), + STATS_OFFSET32(stat_MacControlFramesReceived), + STATS_OFFSET32(stat_IfInFramesL2FilterDiscards), + STATS_OFFSET32(stat_IfInMBUFDiscards), +}; + +/* stat_IfHCInBadOctets and stat_Dot3StatsCarrierSenseErrors are + * skipped because of errata. + */ +u8 bnx2_5706_stats_len_arr[BNX2_NUM_STATS] = { + 8,0,8,8,8,8,8,8,8,8, + 4,0,4,4,4,4,4,4,4,4, + 4,4,4,4,4,4,4,4,4,4, + 4,4,4,4,4,4,4,4,4,4, + 4,4,4,4,4, +}; + +#define BNX2_NUM_TESTS 6 + +struct { + char string[ETH_GSTRING_LEN]; +} bnx2_tests_str_arr[BNX2_NUM_TESTS] = { + { "register_test (offline)" }, + { "memory_test (offline)" }, + { "loopback_test (offline)" }, + { "nvram_test (online)" }, + { "interrupt_test (online)" }, + { "link_test (online)" }, +}; + +static int +bnx2_self_test_count(struct net_device *dev) +{ + return BNX2_NUM_TESTS; +} + +static void +bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf) +{ + struct bnx2 *bp = dev->priv; + + memset(buf, 0, sizeof(u64) * BNX2_NUM_TESTS); + if (etest->flags & ETH_TEST_FL_OFFLINE) { + bnx2_netif_stop(bp); + bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_DIAG); + bnx2_free_skbs(bp); + + if (bnx2_test_registers(bp) != 0) { + buf[0] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + if (bnx2_test_memory(bp) != 0) { + buf[1] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + if (bnx2_test_loopback(bp) != 0) { + buf[2] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + + if (!netif_running(bp->dev)) { + bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET); + } + else { + bnx2_init_nic(bp); + bnx2_netif_start(bp); + } + + /* wait for link up */ + msleep_interruptible(3000); + if ((!bp->link_up) && !(bp->phy_flags & PHY_SERDES_FLAG)) + msleep_interruptible(4000); + } + + if (bnx2_test_nvram(bp) != 0) { + buf[3] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + if (bnx2_test_intr(bp) != 0) { + buf[4] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + + if (bnx2_test_link(bp) != 0) { + buf[5] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + + } +} + +static void +bnx2_get_strings(struct net_device *dev, u32 stringset, u8 *buf) +{ + switch (stringset) { + case ETH_SS_STATS: + memcpy(buf, bnx2_stats_str_arr, + sizeof(bnx2_stats_str_arr)); + break; + case ETH_SS_TEST: + memcpy(buf, bnx2_tests_str_arr, + sizeof(bnx2_tests_str_arr)); + break; + } +} + +static int +bnx2_get_stats_count(struct net_device *dev) +{ + return BNX2_NUM_STATS; +} + +static void +bnx2_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *buf) +{ + struct bnx2 *bp = dev->priv; + int i; + u32 *hw_stats = (u32 *) bp->stats_blk; + u8 *stats_len_arr = 0; + + if (hw_stats == NULL) { + memset(buf, 0, sizeof(u64) * BNX2_NUM_STATS); + return; + } + + if (CHIP_NUM(bp) == CHIP_NUM_5706) + stats_len_arr = bnx2_5706_stats_len_arr; + + for (i = 0; i < BNX2_NUM_STATS; i++) { + if (stats_len_arr[i] == 0) { + /* skip this counter */ + buf[i] = 0; + continue; + } + if (stats_len_arr[i] == 4) { + /* 4-byte counter */ + buf[i] = (u64) + *(hw_stats + bnx2_stats_offset_arr[i]); + continue; + } + /* 8-byte counter */ + buf[i] = (((u64) *(hw_stats + + bnx2_stats_offset_arr[i])) << 32) + + *(hw_stats + bnx2_stats_offset_arr[i] + 1); + } +} + +static int +bnx2_phys_id(struct net_device *dev, u32 data) +{ + struct bnx2 *bp = dev->priv; + int i; + u32 save; + + if (data == 0) + data = 2; + + save = REG_RD(bp, BNX2_MISC_CFG); + REG_WR(bp, BNX2_MISC_CFG, BNX2_MISC_CFG_LEDMODE_MAC); + + for (i = 0; i < (data * 2); i++) { + if ((i % 2) == 0) { + REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE); + } + else { + REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE | + BNX2_EMAC_LED_1000MB_OVERRIDE | + BNX2_EMAC_LED_100MB_OVERRIDE | + BNX2_EMAC_LED_10MB_OVERRIDE | + BNX2_EMAC_LED_TRAFFIC_OVERRIDE | + BNX2_EMAC_LED_TRAFFIC); + } + msleep_interruptible(500); + if (signal_pending(current)) + break; + } + REG_WR(bp, BNX2_EMAC_LED, 0); + REG_WR(bp, BNX2_MISC_CFG, save); + return 0; +} + +static struct ethtool_ops bnx2_ethtool_ops = { + .get_settings = bnx2_get_settings, + .set_settings = bnx2_set_settings, + .get_drvinfo = bnx2_get_drvinfo, + .get_wol = bnx2_get_wol, + .set_wol = bnx2_set_wol, + .nway_reset = bnx2_nway_reset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = bnx2_get_eeprom_len, + .get_eeprom = bnx2_get_eeprom, + .set_eeprom = bnx2_set_eeprom, + .get_coalesce = bnx2_get_coalesce, + .set_coalesce = bnx2_set_coalesce, + .get_ringparam = bnx2_get_ringparam, + .set_ringparam = bnx2_set_ringparam, + .get_pauseparam = bnx2_get_pauseparam, + .set_pauseparam = bnx2_set_pauseparam, + .get_rx_csum = bnx2_get_rx_csum, + .set_rx_csum = bnx2_set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, +#ifdef BCM_TSO + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, +#endif + .self_test_count = bnx2_self_test_count, + .self_test = bnx2_self_test, + .get_strings = bnx2_get_strings, + .phys_id = bnx2_phys_id, + .get_stats_count = bnx2_get_stats_count, + .get_ethtool_stats = bnx2_get_ethtool_stats, +}; + +/* Called with rtnl_lock */ +static int +bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct mii_ioctl_data *data = (struct mii_ioctl_data *)&ifr->ifr_data; + struct bnx2 *bp = dev->priv; + int err; + + switch(cmd) { + case SIOCGMIIPHY: + data->phy_id = bp->phy_addr; + + /* fallthru */ + case SIOCGMIIREG: { + u32 mii_regval; + + spin_lock_irq(&bp->phy_lock); + err = bnx2_read_phy(bp, data->reg_num & 0x1f, &mii_regval); + spin_unlock_irq(&bp->phy_lock); + + data->val_out = mii_regval; + + return err; + } + + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + spin_lock_irq(&bp->phy_lock); + err = bnx2_write_phy(bp, data->reg_num & 0x1f, data->val_in); + spin_unlock_irq(&bp->phy_lock); + + return err; + + default: + /* do nothing */ + break; + } + return -EOPNOTSUPP; +} + +/* Called with rtnl_lock */ +static int +bnx2_change_mac_addr(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + struct bnx2 *bp = dev->priv; + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + if (netif_running(dev)) + bnx2_set_mac_addr(bp); + + return 0; +} + +/* Called with rtnl_lock */ +static int +bnx2_change_mtu(struct net_device *dev, int new_mtu) +{ + struct bnx2 *bp = dev->priv; + + if (((new_mtu + ETH_HLEN) > MAX_ETHERNET_JUMBO_PACKET_SIZE) || + ((new_mtu + ETH_HLEN) < MIN_ETHERNET_PACKET_SIZE)) + return -EINVAL; + + dev->mtu = new_mtu; + if (netif_running(dev)) { + bnx2_netif_stop(bp); + + bnx2_init_nic(bp); + + bnx2_netif_start(bp); + } + return 0; +} + +#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER) +static void +poll_bnx2(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + + disable_irq(bp->pdev->irq); + bnx2_interrupt(bp->pdev->irq, dev, NULL); + enable_irq(bp->pdev->irq); +} +#endif + +static int __devinit +bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) +{ + struct bnx2 *bp; + unsigned long mem_len; + int rc; + u32 reg; + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + bp = dev->priv; + + bp->flags = 0; + bp->phy_flags = 0; + + /* enable device (incl. PCI PM wakeup), and bus-mastering */ + rc = pci_enable_device(pdev); + if (rc) { + printk(KERN_ERR PFX "Cannot enable PCI device, aborting."); + goto err_out; + } + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + printk(KERN_ERR PFX "Cannot find PCI device base address, " + "aborting.\n"); + rc = -ENODEV; + goto err_out_disable; + } + + rc = pci_request_regions(pdev, DRV_MODULE_NAME); + if (rc) { + printk(KERN_ERR PFX "Cannot obtain PCI resources, aborting.\n"); + goto err_out_disable; + } + + pci_set_master(pdev); + + bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (bp->pm_cap == 0) { + printk(KERN_ERR PFX "Cannot find power management capability, " + "aborting.\n"); + rc = -EIO; + goto err_out_release; + } + + bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX); + if (bp->pcix_cap == 0) { + printk(KERN_ERR PFX "Cannot find PCIX capability, aborting.\n"); + rc = -EIO; + goto err_out_release; + } + + if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) { + bp->flags |= USING_DAC_FLAG; + if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK) != 0) { + printk(KERN_ERR PFX "pci_set_consistent_dma_mask " + "failed, aborting.\n"); + rc = -EIO; + goto err_out_release; + } + } + else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) { + printk(KERN_ERR PFX "System does not support DMA, aborting.\n"); + rc = -EIO; + goto err_out_release; + } + + bp->dev = dev; + bp->pdev = pdev; + + spin_lock_init(&bp->phy_lock); + spin_lock_init(&bp->tx_lock); + INIT_WORK(&bp->reset_task, bnx2_reset_task, bp); + + dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0); + mem_len = MB_GET_CID_ADDR(17); + dev->mem_end = dev->mem_start + mem_len; + dev->irq = pdev->irq; + + bp->regview = ioremap_nocache(dev->base_addr, mem_len); + + if (!bp->regview) { + printk(KERN_ERR PFX "Cannot map register space, aborting.\n"); + rc = -ENOMEM; + goto err_out_release; + } + + /* Configure byte swap and enable write to the reg_window registers. + * Rely on CPU to do target byte swapping on big endian systems + * The chip's target access swapping will not swap all accesses + */ + pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG, + BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | + BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP); + + bnx2_set_power_state(bp, 0); + + bp->chip_id = REG_RD(bp, BNX2_MISC_ID); + + bp->phy_addr = 1; + + /* Get bus information. */ + reg = REG_RD(bp, BNX2_PCICFG_MISC_STATUS); + if (reg & BNX2_PCICFG_MISC_STATUS_PCIX_DET) { + u32 clkreg; + + bp->flags |= PCIX_FLAG; + + clkreg = REG_RD(bp, BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS); + + clkreg &= BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET; + switch (clkreg) { + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ: + bp->bus_speed_mhz = 133; + break; + + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ: + bp->bus_speed_mhz = 100; + break; + + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ: + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ: + bp->bus_speed_mhz = 66; + break; + + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ: + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ: + bp->bus_speed_mhz = 50; + break; + + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW: + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ: + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ: + bp->bus_speed_mhz = 33; + break; + } + } + else { + if (reg & BNX2_PCICFG_MISC_STATUS_M66EN) + bp->bus_speed_mhz = 66; + else + bp->bus_speed_mhz = 33; + } + + if (reg & BNX2_PCICFG_MISC_STATUS_32BIT_DET) + bp->flags |= PCI_32BIT_FLAG; + + /* 5706A0 may falsely detect SERR and PERR. */ + if (CHIP_ID(bp) == CHIP_ID_5706_A0) { + reg = REG_RD(bp, PCI_COMMAND); + reg &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY); + REG_WR(bp, PCI_COMMAND, reg); + } + else if ((CHIP_ID(bp) == CHIP_ID_5706_A1) && + !(bp->flags & PCIX_FLAG)) { + + printk(KERN_ERR PFX "5706 A1 can only be used in a PCIX bus, " + "aborting.\n"); + goto err_out_unmap; + } + + bnx2_init_nvram(bp); + + /* Get the permanent MAC address. First we need to make sure the + * firmware is actually running. + */ + reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DEV_INFO_SIGNATURE); + + if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) != + BNX2_DEV_INFO_SIGNATURE_MAGIC) { + printk(KERN_ERR PFX "Firmware not running, aborting.\n"); + rc = -ENODEV; + goto err_out_unmap; + } + + bp->fw_ver = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + + BNX2_DEV_INFO_BC_REV); + + reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_MAC_UPPER); + bp->mac_addr[0] = (u8) (reg >> 8); + bp->mac_addr[1] = (u8) reg; + + reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_MAC_LOWER); + bp->mac_addr[2] = (u8) (reg >> 24); + bp->mac_addr[3] = (u8) (reg >> 16); + bp->mac_addr[4] = (u8) (reg >> 8); + bp->mac_addr[5] = (u8) reg; + + bp->tx_ring_size = MAX_TX_DESC_CNT; + bp->rx_ring_size = 100; + + bp->rx_csum = 1; + + bp->rx_offset = sizeof(struct l2_fhdr) + 2; + + bp->tx_quick_cons_trip_int = 20; + bp->tx_quick_cons_trip = 20; + bp->tx_ticks_int = 80; + bp->tx_ticks = 80; + + bp->rx_quick_cons_trip_int = 6; + bp->rx_quick_cons_trip = 6; + bp->rx_ticks_int = 18; + bp->rx_ticks = 18; + + bp->stats_ticks = 1000000 & 0xffff00; + + bp->timer_interval = HZ; + + /* Disable WOL support if we are running on a SERDES chip. */ + if (CHIP_BOND_ID(bp) & CHIP_BOND_ID_SERDES_BIT) { + bp->phy_flags |= PHY_SERDES_FLAG; + bp->flags |= NO_WOL_FLAG; + } + + if (CHIP_ID(bp) == CHIP_ID_5706_A0) { + bp->tx_quick_cons_trip_int = + bp->tx_quick_cons_trip; + bp->tx_ticks_int = bp->tx_ticks; + bp->rx_quick_cons_trip_int = + bp->rx_quick_cons_trip; + bp->rx_ticks_int = bp->rx_ticks; + bp->comp_prod_trip_int = bp->comp_prod_trip; + bp->com_ticks_int = bp->com_ticks; + bp->cmd_ticks_int = bp->cmd_ticks; + } + + bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL; + bp->req_line_speed = 0; + if (bp->phy_flags & PHY_SERDES_FLAG) { + bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg; + } + else { + bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg; + } + + bp->req_flow_ctrl = FLOW_CTRL_RX | FLOW_CTRL_TX; + + return 0; + +err_out_unmap: + if (bp->regview) { + iounmap(bp->regview); + } + +err_out_release: + pci_release_regions(pdev); + +err_out_disable: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + +err_out: + return rc; +} + +static int __devinit +bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int version_printed = 0; + struct net_device *dev = NULL; + struct bnx2 *bp; + int rc, i; + + if (version_printed++ == 0) + printk(KERN_INFO "%s", version); + + /* dev zeroed in init_etherdev */ + dev = alloc_etherdev(sizeof(*bp)); + + if (!dev) + return -ENOMEM; + + rc = bnx2_init_board(pdev, dev); + if (rc < 0) { + free_netdev(dev); + return rc; + } + + dev->open = bnx2_open; + dev->hard_start_xmit = bnx2_start_xmit; + dev->stop = bnx2_close; + dev->get_stats = bnx2_get_stats; + dev->set_multicast_list = bnx2_set_rx_mode; + dev->do_ioctl = bnx2_ioctl; + dev->set_mac_address = bnx2_change_mac_addr; + dev->change_mtu = bnx2_change_mtu; + dev->tx_timeout = bnx2_tx_timeout; + dev->watchdog_timeo = TX_TIMEOUT; +#ifdef BCM_VLAN + dev->vlan_rx_register = bnx2_vlan_rx_register; + dev->vlan_rx_kill_vid = bnx2_vlan_rx_kill_vid; +#endif + dev->poll = bnx2_poll; + dev->ethtool_ops = &bnx2_ethtool_ops; + dev->weight = 64; + + bp = dev->priv; + +#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER) + dev->poll_controller = poll_bnx2; +#endif + + if ((rc = register_netdev(dev))) { + printk(KERN_ERR PFX "Cannot register net device\n"); + if (bp->regview) + iounmap(bp->regview); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + free_netdev(dev); + return rc; + } + + pci_set_drvdata(pdev, dev); + + memcpy(dev->dev_addr, bp->mac_addr, 6); + bp->name = board_info[ent->driver_data].name, + printk(KERN_INFO "%s: %s (%c%d) PCI%s %s %dMHz found at mem %lx, " + "IRQ %d, ", + dev->name, + bp->name, + ((CHIP_ID(bp) & 0xf000) >> 12) + 'A', + ((CHIP_ID(bp) & 0x0ff0) >> 4), + ((bp->flags & PCIX_FLAG) ? "-X" : ""), + ((bp->flags & PCI_32BIT_FLAG) ? "32-bit" : "64-bit"), + bp->bus_speed_mhz, + dev->base_addr, + bp->pdev->irq); + + printk("node addr "); + for (i = 0; i < 6; i++) + printk("%2.2x", dev->dev_addr[i]); + printk("\n"); + + dev->features |= NETIF_F_SG; + if (bp->flags & USING_DAC_FLAG) + dev->features |= NETIF_F_HIGHDMA; + dev->features |= NETIF_F_IP_CSUM; +#ifdef BCM_VLAN + dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; +#endif +#ifdef BCM_TSO + dev->features |= NETIF_F_TSO; +#endif + + netif_carrier_off(bp->dev); + + return 0; +} + +static void __devexit +bnx2_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2 *bp = dev->priv; + + unregister_netdev(dev); + + if (bp->regview) + iounmap(bp->regview); + + free_netdev(dev); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +} + +static int +bnx2_suspend(struct pci_dev *pdev, u32 state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2 *bp = dev->priv; + u32 reset_code; + + if (!netif_running(dev)) + return 0; + + bnx2_netif_stop(bp); + netif_device_detach(dev); + del_timer_sync(&bp->timer); + if (bp->wol) + reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL; + else + reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL; + bnx2_reset_chip(bp, reset_code); + bnx2_free_skbs(bp); + bnx2_set_power_state(bp, state); + return 0; +} + +static int +bnx2_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2 *bp = dev->priv; + + if (!netif_running(dev)) + return 0; + + bnx2_set_power_state(bp, 0); + netif_device_attach(dev); + bnx2_init_nic(bp); + bnx2_netif_start(bp); + return 0; +} + +static struct pci_driver bnx2_pci_driver = { + name: DRV_MODULE_NAME, + id_table: bnx2_pci_tbl, + probe: bnx2_init_one, + remove: __devexit_p(bnx2_remove_one), + suspend: bnx2_suspend, + resume: bnx2_resume, +}; + +static int __init bnx2_init(void) +{ + return pci_module_init(&bnx2_pci_driver); +} + +static void __exit bnx2_cleanup(void) +{ + pci_unregister_driver(&bnx2_pci_driver); +} + +module_init(bnx2_init); +module_exit(bnx2_cleanup); + + + diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h new file mode 100644 index 00000000000..8214a2853d0 --- /dev/null +++ b/drivers/net/bnx2.h @@ -0,0 +1,4352 @@ +/* bnx2.h: Broadcom NX2 network driver. + * + * Copyright (c) 2004, 2005 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Written by: Michael Chan (mchan@broadcom.com) + */ + + +#ifndef BNX2_H +#define BNX2_H + +#include <linux/config.h> + +#include <linux/module.h> +#include <linux/moduleparam.h> + +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/dma-mapping.h> +#include <asm/bitops.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <linux/delay.h> +#include <asm/byteorder.h> +#include <linux/time.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#ifdef NETIF_F_HW_VLAN_TX +#include <linux/if_vlan.h> +#define BCM_VLAN 1 +#endif +#ifdef NETIF_F_TSO +#include <net/ip.h> +#include <net/tcp.h> +#include <net/checksum.h> +#define BCM_TSO 1 +#endif +#include <linux/workqueue.h> +#include <linux/crc32.h> + +/* Hardware data structures and register definitions automatically + * generated from RTL code. Do not modify. + */ + +/* + * tx_bd definition + */ +struct tx_bd { + u32 tx_bd_haddr_hi; + u32 tx_bd_haddr_lo; + u32 tx_bd_mss_nbytes; + u32 tx_bd_vlan_tag_flags; + #define TX_BD_FLAGS_CONN_FAULT (1<<0) + #define TX_BD_FLAGS_TCP_UDP_CKSUM (1<<1) + #define TX_BD_FLAGS_IP_CKSUM (1<<2) + #define TX_BD_FLAGS_VLAN_TAG (1<<3) + #define TX_BD_FLAGS_COAL_NOW (1<<4) + #define TX_BD_FLAGS_DONT_GEN_CRC (1<<5) + #define TX_BD_FLAGS_END (1<<6) + #define TX_BD_FLAGS_START (1<<7) + #define TX_BD_FLAGS_SW_OPTION_WORD (0x1f<<8) + #define TX_BD_FLAGS_SW_FLAGS (1<<13) + #define TX_BD_FLAGS_SW_SNAP (1<<14) + #define TX_BD_FLAGS_SW_LSO (1<<15) + +}; + + +/* + * rx_bd definition + */ +struct rx_bd { + u32 rx_bd_haddr_hi; + u32 rx_bd_haddr_lo; + u32 rx_bd_len; + u32 rx_bd_flags; + #define RX_BD_FLAGS_NOPUSH (1<<0) + #define RX_BD_FLAGS_DUMMY (1<<1) + #define RX_BD_FLAGS_END (1<<2) + #define RX_BD_FLAGS_START (1<<3) + +}; + + +/* + * status_block definition + */ +struct status_block { + u32 status_attn_bits; + #define STATUS_ATTN_BITS_LINK_STATE (1L<<0) + #define STATUS_ATTN_BITS_TX_SCHEDULER_ABORT (1L<<1) + #define STATUS_ATTN_BITS_TX_BD_READ_ABORT (1L<<2) + #define STATUS_ATTN_BITS_TX_BD_CACHE_ABORT (1L<<3) + #define STATUS_ATTN_BITS_TX_PROCESSOR_ABORT (1L<<4) + #define STATUS_ATTN_BITS_TX_DMA_ABORT (1L<<5) + #define STATUS_ATTN_BITS_TX_PATCHUP_ABORT (1L<<6) + #define STATUS_ATTN_BITS_TX_ASSEMBLER_ABORT (1L<<7) + #define STATUS_ATTN_BITS_RX_PARSER_MAC_ABORT (1L<<8) + #define STATUS_ATTN_BITS_RX_PARSER_CATCHUP_ABORT (1L<<9) + #define STATUS_ATTN_BITS_RX_MBUF_ABORT (1L<<10) + #define STATUS_ATTN_BITS_RX_LOOKUP_ABORT (1L<<11) + #define STATUS_ATTN_BITS_RX_PROCESSOR_ABORT (1L<<12) + #define STATUS_ATTN_BITS_RX_V2P_ABORT (1L<<13) + #define STATUS_ATTN_BITS_RX_BD_CACHE_ABORT (1L<<14) + #define STATUS_ATTN_BITS_RX_DMA_ABORT (1L<<15) + #define STATUS_ATTN_BITS_COMPLETION_ABORT (1L<<16) + #define STATUS_ATTN_BITS_HOST_COALESCE_ABORT (1L<<17) + #define STATUS_ATTN_BITS_MAILBOX_QUEUE_ABORT (1L<<18) + #define STATUS_ATTN_BITS_CONTEXT_ABORT (1L<<19) + #define STATUS_ATTN_BITS_CMD_SCHEDULER_ABORT (1L<<20) + #define STATUS_ATTN_BITS_CMD_PROCESSOR_ABORT (1L<<21) + #define STATUS_ATTN_BITS_MGMT_PROCESSOR_ABORT (1L<<22) + #define STATUS_ATTN_BITS_MAC_ABORT (1L<<23) + #define STATUS_ATTN_BITS_TIMER_ABORT (1L<<24) + #define STATUS_ATTN_BITS_DMAE_ABORT (1L<<25) + #define STATUS_ATTN_BITS_FLSH_ABORT (1L<<26) + #define STATUS_ATTN_BITS_GRC_ABORT (1L<<27) + #define STATUS_ATTN_BITS_PARITY_ERROR (1L<<31) + + u32 status_attn_bits_ack; +#if defined(__BIG_ENDIAN) + u16 status_tx_quick_consumer_index0; + u16 status_tx_quick_consumer_index1; + u16 status_tx_quick_consumer_index2; + u16 status_tx_quick_consumer_index3; + u16 status_rx_quick_consumer_index0; + u16 status_rx_quick_consumer_index1; + u16 status_rx_quick_consumer_index2; + u16 status_rx_quick_consumer_index3; + u16 status_rx_quick_consumer_index4; + u16 status_rx_quick_consumer_index5; + u16 status_rx_quick_consumer_index6; + u16 status_rx_quick_consumer_index7; + u16 status_rx_quick_consumer_index8; + u16 status_rx_quick_consumer_index9; + u16 status_rx_quick_consumer_index10; + u16 status_rx_quick_consumer_index11; + u16 status_rx_quick_consumer_index12; + u16 status_rx_quick_consumer_index13; + u16 status_rx_quick_consumer_index14; + u16 status_rx_quick_consumer_index15; + u16 status_completion_producer_index; + u16 status_cmd_consumer_index; + u16 status_idx; + u16 status_unused; +#elif defined(__LITTLE_ENDIAN) + u16 status_tx_quick_consumer_index1; + u16 status_tx_quick_consumer_index0; + u16 status_tx_quick_consumer_index3; + u16 status_tx_quick_consumer_index2; + u16 status_rx_quick_consumer_index1; + u16 status_rx_quick_consumer_index0; + u16 status_rx_quick_consumer_index3; + u16 status_rx_quick_consumer_index2; + u16 status_rx_quick_consumer_index5; + u16 status_rx_quick_consumer_index4; + u16 status_rx_quick_consumer_index7; + u16 status_rx_quick_consumer_index6; + u16 status_rx_quick_consumer_index9; + u16 status_rx_quick_consumer_index8; + u16 status_rx_quick_consumer_index11; + u16 status_rx_quick_consumer_index10; + u16 status_rx_quick_consumer_index13; + u16 status_rx_quick_consumer_index12; + u16 status_rx_quick_consumer_index15; + u16 status_rx_quick_consumer_index14; + u16 status_cmd_consumer_index; + u16 status_completion_producer_index; + u16 status_unused; + u16 status_idx; +#endif +}; + + +/* + * statistics_block definition + */ +struct statistics_block { + u32 stat_IfHCInOctets_hi; + u32 stat_IfHCInOctets_lo; + u32 stat_IfHCInBadOctets_hi; + u32 stat_IfHCInBadOctets_lo; + u32 stat_IfHCOutOctets_hi; + u32 stat_IfHCOutOctets_lo; + u32 stat_IfHCOutBadOctets_hi; + u32 stat_IfHCOutBadOctets_lo; + u32 stat_IfHCInUcastPkts_hi; + u32 stat_IfHCInUcastPkts_lo; + u32 stat_IfHCInMulticastPkts_hi; + u32 stat_IfHCInMulticastPkts_lo; + u32 stat_IfHCInBroadcastPkts_hi; + u32 stat_IfHCInBroadcastPkts_lo; + u32 stat_IfHCOutUcastPkts_hi; + u32 stat_IfHCOutUcastPkts_lo; + u32 stat_IfHCOutMulticastPkts_hi; + u32 stat_IfHCOutMulticastPkts_lo; + u32 stat_IfHCOutBroadcastPkts_hi; + u32 stat_IfHCOutBroadcastPkts_lo; + u32 stat_emac_tx_stat_dot3statsinternalmactransmiterrors; + u32 stat_Dot3StatsCarrierSenseErrors; + u32 stat_Dot3StatsFCSErrors; + u32 stat_Dot3StatsAlignmentErrors; + u32 stat_Dot3StatsSingleCollisionFrames; + u32 stat_Dot3StatsMultipleCollisionFrames; + u32 stat_Dot3StatsDeferredTransmissions; + u32 stat_Dot3StatsExcessiveCollisions; + u32 stat_Dot3StatsLateCollisions; + u32 stat_EtherStatsCollisions; + u32 stat_EtherStatsFragments; + u32 stat_EtherStatsJabbers; + u32 stat_EtherStatsUndersizePkts; + u32 stat_EtherStatsOverrsizePkts; + u32 stat_EtherStatsPktsRx64Octets; + u32 stat_EtherStatsPktsRx65Octetsto127Octets; + u32 stat_EtherStatsPktsRx128Octetsto255Octets; + u32 stat_EtherStatsPktsRx256Octetsto511Octets; + u32 stat_EtherStatsPktsRx512Octetsto1023Octets; + u32 stat_EtherStatsPktsRx1024Octetsto1522Octets; + u32 stat_EtherStatsPktsRx1523Octetsto9022Octets; + u32 stat_EtherStatsPktsTx64Octets; + u32 stat_EtherStatsPktsTx65Octetsto127Octets; + u32 stat_EtherStatsPktsTx128Octetsto255Octets; + u32 stat_EtherStatsPktsTx256Octetsto511Octets; + u32 stat_EtherStatsPktsTx512Octetsto1023Octets; + u32 stat_EtherStatsPktsTx1024Octetsto1522Octets; + u32 stat_EtherStatsPktsTx1523Octetsto9022Octets; + u32 stat_XonPauseFramesReceived; + u32 stat_XoffPauseFramesReceived; + u32 stat_OutXonSent; + u32 stat_OutXoffSent; + u32 stat_FlowControlDone; + u32 stat_MacControlFramesReceived; + u32 stat_XoffStateEntered; + u32 stat_IfInFramesL2FilterDiscards; + u32 stat_IfInRuleCheckerDiscards; + u32 stat_IfInFTQDiscards; + u32 stat_IfInMBUFDiscards; + u32 stat_IfInRuleCheckerP4Hit; + u32 stat_CatchupInRuleCheckerDiscards; + u32 stat_CatchupInFTQDiscards; + u32 stat_CatchupInMBUFDiscards; + u32 stat_CatchupInRuleCheckerP4Hit; + u32 stat_GenStat00; + u32 stat_GenStat01; + u32 stat_GenStat02; + u32 stat_GenStat03; + u32 stat_GenStat04; + u32 stat_GenStat05; + u32 stat_GenStat06; + u32 stat_GenStat07; + u32 stat_GenStat08; + u32 stat_GenStat09; + u32 stat_GenStat10; + u32 stat_GenStat11; + u32 stat_GenStat12; + u32 stat_GenStat13; + u32 stat_GenStat14; + u32 stat_GenStat15; +}; + + +/* + * l2_fhdr definition + */ +struct l2_fhdr { +#if defined(__BIG_ENDIAN) + u16 l2_fhdr_errors; + u16 l2_fhdr_status; +#elif defined(__LITTLE_ENDIAN) + u16 l2_fhdr_status; + u16 l2_fhdr_errors; +#endif + #define L2_FHDR_ERRORS_BAD_CRC (1<<1) + #define L2_FHDR_ERRORS_PHY_DECODE (1<<2) + #define L2_FHDR_ERRORS_ALIGNMENT (1<<3) + #define L2_FHDR_ERRORS_TOO_SHORT (1<<4) + #define L2_FHDR_ERRORS_GIANT_FRAME (1<<5) + + #define L2_FHDR_STATUS_RULE_CLASS (0x7<<0) + #define L2_FHDR_STATUS_RULE_P2 (1<<3) + #define L2_FHDR_STATUS_RULE_P3 (1<<4) + #define L2_FHDR_STATUS_RULE_P4 (1<<5) + #define L2_FHDR_STATUS_L2_VLAN_TAG (1<<6) + #define L2_FHDR_STATUS_L2_LLC_SNAP (1<<7) + #define L2_FHDR_STATUS_RSS_HASH (1<<8) + #define L2_FHDR_STATUS_IP_DATAGRAM (1<<13) + #define L2_FHDR_STATUS_TCP_SEGMENT (1<<14) + #define L2_FHDR_STATUS_UDP_DATAGRAM (1<<15) + + u32 l2_fhdr_hash; +#if defined(__BIG_ENDIAN) + u16 l2_fhdr_pkt_len; + u16 l2_fhdr_vlan_tag; + u16 l2_fhdr_ip_xsum; + u16 l2_fhdr_tcp_udp_xsum; +#elif defined(__LITTLE_ENDIAN) + u16 l2_fhdr_vlan_tag; + u16 l2_fhdr_pkt_len; + u16 l2_fhdr_tcp_udp_xsum; + u16 l2_fhdr_ip_xsum; +#endif +}; + + +/* + * l2_context definition + */ +#define BNX2_L2CTX_TYPE 0x00000000 +#define BNX2_L2CTX_TYPE_SIZE_L2 ((0xc0/0x20)<<16) +#define BNX2_L2CTX_TYPE_TYPE (0xf<<28) +#define BNX2_L2CTX_TYPE_TYPE_EMPTY (0<<28) +#define BNX2_L2CTX_TYPE_TYPE_L2 (1<<28) + +#define BNX2_L2CTX_TX_HOST_BIDX 0x00000088 +#define BNX2_L2CTX_EST_NBD 0x00000088 +#define BNX2_L2CTX_CMD_TYPE 0x00000088 +#define BNX2_L2CTX_CMD_TYPE_TYPE (0xf<<24) +#define BNX2_L2CTX_CMD_TYPE_TYPE_L2 (0<<24) +#define BNX2_L2CTX_CMD_TYPE_TYPE_TCP (1<<24) + +#define BNX2_L2CTX_TX_HOST_BSEQ 0x00000090 +#define BNX2_L2CTX_TSCH_BSEQ 0x00000094 +#define BNX2_L2CTX_TBDR_BSEQ 0x00000098 +#define BNX2_L2CTX_TBDR_BOFF 0x0000009c +#define BNX2_L2CTX_TBDR_BIDX 0x0000009c +#define BNX2_L2CTX_TBDR_BHADDR_HI 0x000000a0 +#define BNX2_L2CTX_TBDR_BHADDR_LO 0x000000a4 +#define BNX2_L2CTX_TXP_BOFF 0x000000a8 +#define BNX2_L2CTX_TXP_BIDX 0x000000a8 +#define BNX2_L2CTX_TXP_BSEQ 0x000000ac + + +/* + * l2_bd_chain_context definition + */ +#define BNX2_L2CTX_BD_PRE_READ 0x00000000 +#define BNX2_L2CTX_CTX_SIZE 0x00000000 +#define BNX2_L2CTX_CTX_TYPE 0x00000000 +#define BNX2_L2CTX_CTX_TYPE_SIZE_L2 ((0x20/20)<<16) +#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE (0xf<<28) +#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_UNDEFINED (0<<28) +#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE (1<<28) + +#define BNX2_L2CTX_HOST_BDIDX 0x00000004 +#define BNX2_L2CTX_HOST_BSEQ 0x00000008 +#define BNX2_L2CTX_NX_BSEQ 0x0000000c +#define BNX2_L2CTX_NX_BDHADDR_HI 0x00000010 +#define BNX2_L2CTX_NX_BDHADDR_LO 0x00000014 +#define BNX2_L2CTX_NX_BDIDX 0x00000018 + + +/* + * pci_config_l definition + * offset: 0000 + */ +#define BNX2_PCICFG_MISC_CONFIG 0x00000068 +#define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2) +#define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3) +#define BNX2_PCICFG_MISC_CONFIG_CLOCK_CTL_ENA (1L<<5) +#define BNX2_PCICFG_MISC_CONFIG_TARGET_GRC_WORD_SWAP (1L<<6) +#define BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA (1L<<7) +#define BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ (1L<<8) +#define BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY (1L<<9) +#define BNX2_PCICFG_MISC_CONFIG_ASIC_METAL_REV (0xffL<<16) +#define BNX2_PCICFG_MISC_CONFIG_ASIC_BASE_REV (0xfL<<24) +#define BNX2_PCICFG_MISC_CONFIG_ASIC_ID (0xfL<<28) + +#define BNX2_PCICFG_MISC_STATUS 0x0000006c +#define BNX2_PCICFG_MISC_STATUS_INTA_VALUE (1L<<0) +#define BNX2_PCICFG_MISC_STATUS_32BIT_DET (1L<<1) +#define BNX2_PCICFG_MISC_STATUS_M66EN (1L<<2) +#define BNX2_PCICFG_MISC_STATUS_PCIX_DET (1L<<3) +#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED (0x3L<<4) +#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_66 (0L<<4) +#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_100 (1L<<4) +#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_133 (2L<<4) +#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_PCI_MODE (3L<<4) + +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS 0x00000070 +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET (0xfL<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ (0L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ (1L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ (2L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ (3L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ (4L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ (5L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ (6L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ (7L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW (0xfL<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_DISABLE (1L<<6) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT (1L<<7) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC (0x7L<<8) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_UNDEF (0L<<8) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_12 (1L<<8) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_6 (2L<<8) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_62 (4L<<8) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PLAY_DEAD (1L<<11) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED (0xfL<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_100 (0L<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_80 (1L<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_50 (2L<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_40 (4L<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_25 (8L<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_STOP (1L<<16) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_PLL_STOP (1L<<17) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_RESERVED_18 (1L<<18) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_USE_SPD_DET (1L<<19) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_RESERVED (0xfffL<<20) + +#define BNX2_PCICFG_REG_WINDOW_ADDRESS 0x00000078 +#define BNX2_PCICFG_REG_WINDOW 0x00000080 +#define BNX2_PCICFG_INT_ACK_CMD 0x00000084 +#define BNX2_PCICFG_INT_ACK_CMD_INDEX (0xffffL<<0) +#define BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID (1L<<16) +#define BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM (1L<<17) +#define BNX2_PCICFG_INT_ACK_CMD_MASK_INT (1L<<18) + +#define BNX2_PCICFG_STATUS_BIT_SET_CMD 0x00000088 +#define BNX2_PCICFG_STATUS_BIT_CLEAR_CMD 0x0000008c +#define BNX2_PCICFG_MAILBOX_QUEUE_ADDR 0x00000090 +#define BNX2_PCICFG_MAILBOX_QUEUE_DATA 0x00000094 + + +/* + * pci_reg definition + * offset: 0x400 + */ +#define BNX2_PCI_GRC_WINDOW_ADDR 0x00000400 +#define BNX2_PCI_GRC_WINDOW_ADDR_PCI_GRC_WINDOW_ADDR_VALUE (0x3ffffL<<8) + +#define BNX2_PCI_CONFIG_1 0x00000404 +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY (0x7L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_OFF (0L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_16 (1L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_32 (2L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_64 (3L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_128 (4L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_256 (5L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_512 (6L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_1024 (7L<<8) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY (0x7L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_OFF (0L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_16 (1L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_32 (2L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_64 (3L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_128 (4L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_256 (5L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_512 (6L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_1024 (7L<<11) + +#define BNX2_PCI_CONFIG_2 0x00000408 +#define BNX2_PCI_CONFIG_2_BAR1_SIZE (0xfL<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_DISABLED (0L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_64K (1L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_128K (2L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_256K (3L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_512K (4L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_1M (5L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_2M (6L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_4M (7L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_8M (8L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_16M (9L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_32M (10L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_64M (11L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_128M (12L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_256M (13L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_512M (14L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_1G (15L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_64ENA (1L<<4) +#define BNX2_PCI_CONFIG_2_EXP_ROM_RETRY (1L<<5) +#define BNX2_PCI_CONFIG_2_CFG_CYCLE_RETRY (1L<<6) +#define BNX2_PCI_CONFIG_2_FIRST_CFG_DONE (1L<<7) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE (0xffL<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED (0L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_1K (1L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_2K (2L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_4K (3L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_8K (4L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_16K (5L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_32K (6L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_64K (7L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_128K (8L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_256K (9L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_512K (10L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_1M (11L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_2M (12L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_4M (13L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_8M (14L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_16M (15L<<8) +#define BNX2_PCI_CONFIG_2_MAX_SPLIT_LIMIT (0x1fL<<16) +#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT (0x3L<<21) +#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_512 (0L<<21) +#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_1K (1L<<21) +#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_2K (2L<<21) +#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_4K (3L<<21) +#define BNX2_PCI_CONFIG_2_FORCE_32_BIT_MSTR (1L<<23) +#define BNX2_PCI_CONFIG_2_FORCE_32_BIT_TGT (1L<<24) +#define BNX2_PCI_CONFIG_2_KEEP_REQ_ASSERT (1L<<25) + +#define BNX2_PCI_CONFIG_3 0x0000040c +#define BNX2_PCI_CONFIG_3_STICKY_BYTE (0xffL<<0) +#define BNX2_PCI_CONFIG_3_FORCE_PME (1L<<24) +#define BNX2_PCI_CONFIG_3_PME_STATUS (1L<<25) +#define BNX2_PCI_CONFIG_3_PME_ENABLE (1L<<26) +#define BNX2_PCI_CONFIG_3_PM_STATE (0x3L<<27) +#define BNX2_PCI_CONFIG_3_VAUX_PRESET (1L<<30) +#define BNX2_PCI_CONFIG_3_PCI_POWER (1L<<31) + +#define BNX2_PCI_PM_DATA_A 0x00000410 +#define BNX2_PCI_PM_DATA_A_PM_DATA_0_PRG (0xffL<<0) +#define BNX2_PCI_PM_DATA_A_PM_DATA_1_PRG (0xffL<<8) +#define BNX2_PCI_PM_DATA_A_PM_DATA_2_PRG (0xffL<<16) +#define BNX2_PCI_PM_DATA_A_PM_DATA_3_PRG (0xffL<<24) + +#define BNX2_PCI_PM_DATA_B 0x00000414 +#define BNX2_PCI_PM_DATA_B_PM_DATA_4_PRG (0xffL<<0) +#define BNX2_PCI_PM_DATA_B_PM_DATA_5_PRG (0xffL<<8) +#define BNX2_PCI_PM_DATA_B_PM_DATA_6_PRG (0xffL<<16) +#define BNX2_PCI_PM_DATA_B_PM_DATA_7_PRG (0xffL<<24) + +#define BNX2_PCI_SWAP_DIAG0 0x00000418 +#define BNX2_PCI_SWAP_DIAG1 0x0000041c +#define BNX2_PCI_EXP_ROM_ADDR 0x00000420 +#define BNX2_PCI_EXP_ROM_ADDR_ADDRESS (0x3fffffL<<2) +#define BNX2_PCI_EXP_ROM_ADDR_REQ (1L<<31) + +#define BNX2_PCI_EXP_ROM_DATA 0x00000424 +#define BNX2_PCI_VPD_INTF 0x00000428 +#define BNX2_PCI_VPD_INTF_INTF_REQ (1L<<0) + +#define BNX2_PCI_VPD_ADDR_FLAG 0x0000042c +#define BNX2_PCI_VPD_ADDR_FLAG_ADDRESS (0x1fff<<2) +#define BNX2_PCI_VPD_ADDR_FLAG_WR (1<<15) + +#define BNX2_PCI_VPD_DATA 0x00000430 +#define BNX2_PCI_ID_VAL1 0x00000434 +#define BNX2_PCI_ID_VAL1_DEVICE_ID (0xffffL<<0) +#define BNX2_PCI_ID_VAL1_VENDOR_ID (0xffffL<<16) + +#define BNX2_PCI_ID_VAL2 0x00000438 +#define BNX2_PCI_ID_VAL2_SUBSYSTEM_VENDOR_ID (0xffffL<<0) +#define BNX2_PCI_ID_VAL2_SUBSYSTEM_ID (0xffffL<<16) + +#define BNX2_PCI_ID_VAL3 0x0000043c +#define BNX2_PCI_ID_VAL3_CLASS_CODE (0xffffffL<<0) +#define BNX2_PCI_ID_VAL3_REVISION_ID (0xffL<<24) + +#define BNX2_PCI_ID_VAL4 0x00000440 +#define BNX2_PCI_ID_VAL4_CAP_ENA (0xfL<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_0 (0L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_1 (1L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_2 (2L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_3 (3L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_4 (4L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_5 (5L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_6 (6L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_7 (7L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_8 (8L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_9 (9L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_10 (10L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_11 (11L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_12 (12L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_13 (13L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_14 (14L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_15 (15L<<0) +#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG (0x3L<<6) +#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_0 (0L<<6) +#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_1 (1L<<6) +#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_2 (2L<<6) +#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_3 (3L<<6) +#define BNX2_PCI_ID_VAL4_MSI_LIMIT (0x7L<<9) +#define BNX2_PCI_ID_VAL4_MSI_ADVERTIZE (0x7L<<12) +#define BNX2_PCI_ID_VAL4_MSI_ENABLE (1L<<15) +#define BNX2_PCI_ID_VAL4_MAX_64_ADVERTIZE (1L<<16) +#define BNX2_PCI_ID_VAL4_MAX_133_ADVERTIZE (1L<<17) +#define BNX2_PCI_ID_VAL4_MAX_MEM_READ_SIZE (0x3L<<21) +#define BNX2_PCI_ID_VAL4_MAX_SPLIT_SIZE (0x7L<<23) +#define BNX2_PCI_ID_VAL4_MAX_CUMULATIVE_SIZE (0x7L<<26) + +#define BNX2_PCI_ID_VAL5 0x00000444 +#define BNX2_PCI_ID_VAL5_D1_SUPPORT (1L<<0) +#define BNX2_PCI_ID_VAL5_D2_SUPPORT (1L<<1) +#define BNX2_PCI_ID_VAL5_PME_IN_D0 (1L<<2) +#define BNX2_PCI_ID_VAL5_PME_IN_D1 (1L<<3) +#define BNX2_PCI_ID_VAL5_PME_IN_D2 (1L<<4) +#define BNX2_PCI_ID_VAL5_PME_IN_D3_HOT (1L<<5) + +#define BNX2_PCI_PCIX_EXTENDED_STATUS 0x00000448 +#define BNX2_PCI_PCIX_EXTENDED_STATUS_NO_SNOOP (1L<<8) +#define BNX2_PCI_PCIX_EXTENDED_STATUS_LONG_BURST (1L<<9) +#define BNX2_PCI_PCIX_EXTENDED_STATUS_SPLIT_COMP_MSG_CLASS (0xfL<<16) +#define BNX2_PCI_PCIX_EXTENDED_STATUS_SPLIT_COMP_MSG_IDX (0xffL<<24) + +#define BNX2_PCI_ID_VAL6 0x0000044c +#define BNX2_PCI_ID_VAL6_MAX_LAT (0xffL<<0) +#define BNX2_PCI_ID_VAL6_MIN_GNT (0xffL<<8) +#define BNX2_PCI_ID_VAL6_BIST (0xffL<<16) + +#define BNX2_PCI_MSI_DATA 0x00000450 +#define BNX2_PCI_MSI_DATA_PCI_MSI_DATA (0xffffL<<0) + +#define BNX2_PCI_MSI_ADDR_H 0x00000454 +#define BNX2_PCI_MSI_ADDR_L 0x00000458 + + +/* + * misc_reg definition + * offset: 0x800 + */ +#define BNX2_MISC_COMMAND 0x00000800 +#define BNX2_MISC_COMMAND_ENABLE_ALL (1L<<0) +#define BNX2_MISC_COMMAND_DISABLE_ALL (1L<<1) +#define BNX2_MISC_COMMAND_CORE_RESET (1L<<4) +#define BNX2_MISC_COMMAND_HARD_RESET (1L<<5) +#define BNX2_MISC_COMMAND_PAR_ERROR (1L<<8) +#define BNX2_MISC_COMMAND_PAR_ERR_RAM (0x7fL<<16) + +#define BNX2_MISC_CFG 0x00000804 +#define BNX2_MISC_CFG_PCI_GRC_TMOUT (1L<<0) +#define BNX2_MISC_CFG_NVM_WR_EN (0x3L<<1) +#define BNX2_MISC_CFG_NVM_WR_EN_PROTECT (0L<<1) +#define BNX2_MISC_CFG_NVM_WR_EN_PCI (1L<<1) +#define BNX2_MISC_CFG_NVM_WR_EN_ALLOW (2L<<1) +#define BNX2_MISC_CFG_NVM_WR_EN_ALLOW2 (3L<<1) +#define BNX2_MISC_CFG_BIST_EN (1L<<3) +#define BNX2_MISC_CFG_CK25_OUT_ALT_SRC (1L<<4) +#define BNX2_MISC_CFG_BYPASS_BSCAN (1L<<5) +#define BNX2_MISC_CFG_BYPASS_EJTAG (1L<<6) +#define BNX2_MISC_CFG_CLK_CTL_OVERRIDE (1L<<7) +#define BNX2_MISC_CFG_LEDMODE (0x3L<<8) +#define BNX2_MISC_CFG_LEDMODE_MAC (0L<<8) +#define BNX2_MISC_CFG_LEDMODE_GPHY1 (1L<<8) +#define BNX2_MISC_CFG_LEDMODE_GPHY2 (2L<<8) + +#define BNX2_MISC_ID 0x00000808 +#define BNX2_MISC_ID_BOND_ID (0xfL<<0) +#define BNX2_MISC_ID_CHIP_METAL (0xffL<<4) +#define BNX2_MISC_ID_CHIP_REV (0xfL<<12) +#define BNX2_MISC_ID_CHIP_NUM (0xffffL<<16) + +#define BNX2_MISC_ENABLE_STATUS_BITS 0x0000080c +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_SCHEDULER_ENABLE (1L<<0) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_BD_READ_ENABLE (1L<<1) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_BD_CACHE_ENABLE (1L<<2) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_PROCESSOR_ENABLE (1L<<3) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_DMA_ENABLE (1L<<4) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_PATCHUP_ENABLE (1L<<5) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_HEADER_Q_ENABLE (1L<<7) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_ASSEMBLER_ENABLE (1L<<8) +#define BNX2_MISC_ENABLE_STATUS_BITS_EMAC_ENABLE (1L<<9) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_PARSER_MAC_ENABLE (1L<<10) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_MBUF_ENABLE (1L<<12) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_LOOKUP_ENABLE (1L<<13) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_PROCESSOR_ENABLE (1L<<14) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_V2P_ENABLE (1L<<15) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_BD_CACHE_ENABLE (1L<<16) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_DMA_ENABLE (1L<<17) +#define BNX2_MISC_ENABLE_STATUS_BITS_COMPLETION_ENABLE (1L<<18) +#define BNX2_MISC_ENABLE_STATUS_BITS_HOST_COALESCE_ENABLE (1L<<19) +#define BNX2_MISC_ENABLE_STATUS_BITS_MAILBOX_QUEUE_ENABLE (1L<<20) +#define BNX2_MISC_ENABLE_STATUS_BITS_CONTEXT_ENABLE (1L<<21) +#define BNX2_MISC_ENABLE_STATUS_BITS_CMD_SCHEDULER_ENABLE (1L<<22) +#define BNX2_MISC_ENABLE_STATUS_BITS_CMD_PROCESSOR_ENABLE (1L<<23) +#define BNX2_MISC_ENABLE_STATUS_BITS_MGMT_PROCESSOR_ENABLE (1L<<24) +#define BNX2_MISC_ENABLE_STATUS_BITS_TIMER_ENABLE (1L<<25) +#define BNX2_MISC_ENABLE_STATUS_BITS_DMA_ENGINE_ENABLE (1L<<26) +#define BNX2_MISC_ENABLE_STATUS_BITS_UMP_ENABLE (1L<<27) + +#define BNX2_MISC_ENABLE_SET_BITS 0x00000810 +#define BNX2_MISC_ENABLE_SET_BITS_TX_SCHEDULER_ENABLE (1L<<0) +#define BNX2_MISC_ENABLE_SET_BITS_TX_BD_READ_ENABLE (1L<<1) +#define BNX2_MISC_ENABLE_SET_BITS_TX_BD_CACHE_ENABLE (1L<<2) +#define BNX2_MISC_ENABLE_SET_BITS_TX_PROCESSOR_ENABLE (1L<<3) +#define BNX2_MISC_ENABLE_SET_BITS_TX_DMA_ENABLE (1L<<4) +#define BNX2_MISC_ENABLE_SET_BITS_TX_PATCHUP_ENABLE (1L<<5) +#define BNX2_MISC_ENABLE_SET_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6) +#define BNX2_MISC_ENABLE_SET_BITS_TX_HEADER_Q_ENABLE (1L<<7) +#define BNX2_MISC_ENABLE_SET_BITS_TX_ASSEMBLER_ENABLE (1L<<8) +#define BNX2_MISC_ENABLE_SET_BITS_EMAC_ENABLE (1L<<9) +#define BNX2_MISC_ENABLE_SET_BITS_RX_PARSER_MAC_ENABLE (1L<<10) +#define BNX2_MISC_ENABLE_SET_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11) +#define BNX2_MISC_ENABLE_SET_BITS_RX_MBUF_ENABLE (1L<<12) +#define BNX2_MISC_ENABLE_SET_BITS_RX_LOOKUP_ENABLE (1L<<13) +#define BNX2_MISC_ENABLE_SET_BITS_RX_PROCESSOR_ENABLE (1L<<14) +#define BNX2_MISC_ENABLE_SET_BITS_RX_V2P_ENABLE (1L<<15) +#define BNX2_MISC_ENABLE_SET_BITS_RX_BD_CACHE_ENABLE (1L<<16) +#define BNX2_MISC_ENABLE_SET_BITS_RX_DMA_ENABLE (1L<<17) +#define BNX2_MISC_ENABLE_SET_BITS_COMPLETION_ENABLE (1L<<18) +#define BNX2_MISC_ENABLE_SET_BITS_HOST_COALESCE_ENABLE (1L<<19) +#define BNX2_MISC_ENABLE_SET_BITS_MAILBOX_QUEUE_ENABLE (1L<<20) +#define BNX2_MISC_ENABLE_SET_BITS_CONTEXT_ENABLE (1L<<21) +#define BNX2_MISC_ENABLE_SET_BITS_CMD_SCHEDULER_ENABLE (1L<<22) +#define BNX2_MISC_ENABLE_SET_BITS_CMD_PROCESSOR_ENABLE (1L<<23) +#define BNX2_MISC_ENABLE_SET_BITS_MGMT_PROCESSOR_ENABLE (1L<<24) +#define BNX2_MISC_ENABLE_SET_BITS_TIMER_ENABLE (1L<<25) +#define BNX2_MISC_ENABLE_SET_BITS_DMA_ENGINE_ENABLE (1L<<26) +#define BNX2_MISC_ENABLE_SET_BITS_UMP_ENABLE (1L<<27) + +#define BNX2_MISC_ENABLE_CLR_BITS 0x00000814 +#define BNX2_MISC_ENABLE_CLR_BITS_TX_SCHEDULER_ENABLE (1L<<0) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_BD_READ_ENABLE (1L<<1) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_BD_CACHE_ENABLE (1L<<2) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_PROCESSOR_ENABLE (1L<<3) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE (1L<<4) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_PATCHUP_ENABLE (1L<<5) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_HEADER_Q_ENABLE (1L<<7) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_ASSEMBLER_ENABLE (1L<<8) +#define BNX2_MISC_ENABLE_CLR_BITS_EMAC_ENABLE (1L<<9) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_PARSER_MAC_ENABLE (1L<<10) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_MBUF_ENABLE (1L<<12) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_LOOKUP_ENABLE (1L<<13) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_PROCESSOR_ENABLE (1L<<14) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_V2P_ENABLE (1L<<15) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_BD_CACHE_ENABLE (1L<<16) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE (1L<<17) +#define BNX2_MISC_ENABLE_CLR_BITS_COMPLETION_ENABLE (1L<<18) +#define BNX2_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE (1L<<19) +#define BNX2_MISC_ENABLE_CLR_BITS_MAILBOX_QUEUE_ENABLE (1L<<20) +#define BNX2_MISC_ENABLE_CLR_BITS_CONTEXT_ENABLE (1L<<21) +#define BNX2_MISC_ENABLE_CLR_BITS_CMD_SCHEDULER_ENABLE (1L<<22) +#define BNX2_MISC_ENABLE_CLR_BITS_CMD_PROCESSOR_ENABLE (1L<<23) +#define BNX2_MISC_ENABLE_CLR_BITS_MGMT_PROCESSOR_ENABLE (1L<<24) +#define BNX2_MISC_ENABLE_CLR_BITS_TIMER_ENABLE (1L<<25) +#define BNX2_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE (1L<<26) +#define BNX2_MISC_ENABLE_CLR_BITS_UMP_ENABLE (1L<<27) + +#define BNX2_MISC_CLOCK_CONTROL_BITS 0x00000818 +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET (0xfL<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ (0L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ (1L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ (2L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ (3L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ (4L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ (5L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ (6L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ (7L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW (0xfL<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_DISABLE (1L<<6) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT (1L<<7) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC (0x7L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_UNDEF (0L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_12 (1L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_6 (2L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_62 (4L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PLAY_DEAD (1L<<11) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED (0xfL<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_100 (0L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_80 (1L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_50 (2L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_40 (4L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_25 (8L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_STOP (1L<<16) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_PLL_STOP (1L<<17) +#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED_18 (1L<<18) +#define BNX2_MISC_CLOCK_CONTROL_BITS_USE_SPD_DET (1L<<19) +#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED (0xfffL<<20) + +#define BNX2_MISC_GPIO 0x0000081c +#define BNX2_MISC_GPIO_VALUE (0xffL<<0) +#define BNX2_MISC_GPIO_SET (0xffL<<8) +#define BNX2_MISC_GPIO_CLR (0xffL<<16) +#define BNX2_MISC_GPIO_FLOAT (0xffL<<24) + +#define BNX2_MISC_GPIO_INT 0x00000820 +#define BNX2_MISC_GPIO_INT_INT_STATE (0xfL<<0) +#define BNX2_MISC_GPIO_INT_OLD_VALUE (0xfL<<8) +#define BNX2_MISC_GPIO_INT_OLD_SET (0xfL<<16) +#define BNX2_MISC_GPIO_INT_OLD_CLR (0xfL<<24) + +#define BNX2_MISC_CONFIG_LFSR 0x00000824 +#define BNX2_MISC_CONFIG_LFSR_DIV (0xffffL<<0) + +#define BNX2_MISC_LFSR_MASK_BITS 0x00000828 +#define BNX2_MISC_LFSR_MASK_BITS_TX_SCHEDULER_ENABLE (1L<<0) +#define BNX2_MISC_LFSR_MASK_BITS_TX_BD_READ_ENABLE (1L<<1) +#define BNX2_MISC_LFSR_MASK_BITS_TX_BD_CACHE_ENABLE (1L<<2) +#define BNX2_MISC_LFSR_MASK_BITS_TX_PROCESSOR_ENABLE (1L<<3) +#define BNX2_MISC_LFSR_MASK_BITS_TX_DMA_ENABLE (1L<<4) +#define BNX2_MISC_LFSR_MASK_BITS_TX_PATCHUP_ENABLE (1L<<5) +#define BNX2_MISC_LFSR_MASK_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6) +#define BNX2_MISC_LFSR_MASK_BITS_TX_HEADER_Q_ENABLE (1L<<7) +#define BNX2_MISC_LFSR_MASK_BITS_TX_ASSEMBLER_ENABLE (1L<<8) +#define BNX2_MISC_LFSR_MASK_BITS_EMAC_ENABLE (1L<<9) +#define BNX2_MISC_LFSR_MASK_BITS_RX_PARSER_MAC_ENABLE (1L<<10) +#define BNX2_MISC_LFSR_MASK_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11) +#define BNX2_MISC_LFSR_MASK_BITS_RX_MBUF_ENABLE (1L<<12) +#define BNX2_MISC_LFSR_MASK_BITS_RX_LOOKUP_ENABLE (1L<<13) +#define BNX2_MISC_LFSR_MASK_BITS_RX_PROCESSOR_ENABLE (1L<<14) +#define BNX2_MISC_LFSR_MASK_BITS_RX_V2P_ENABLE (1L<<15) +#define BNX2_MISC_LFSR_MASK_BITS_RX_BD_CACHE_ENABLE (1L<<16) +#define BNX2_MISC_LFSR_MASK_BITS_RX_DMA_ENABLE (1L<<17) +#define BNX2_MISC_LFSR_MASK_BITS_COMPLETION_ENABLE (1L<<18) +#define BNX2_MISC_LFSR_MASK_BITS_HOST_COALESCE_ENABLE (1L<<19) +#define BNX2_MISC_LFSR_MASK_BITS_MAILBOX_QUEUE_ENABLE (1L<<20) +#define BNX2_MISC_LFSR_MASK_BITS_CONTEXT_ENABLE (1L<<21) +#define BNX2_MISC_LFSR_MASK_BITS_CMD_SCHEDULER_ENABLE (1L<<22) +#define BNX2_MISC_LFSR_MASK_BITS_CMD_PROCESSOR_ENABLE (1L<<23) +#define BNX2_MISC_LFSR_MASK_BITS_MGMT_PROCESSOR_ENABLE (1L<<24) +#define BNX2_MISC_LFSR_MASK_BITS_TIMER_ENABLE (1L<<25) +#define BNX2_MISC_LFSR_MASK_BITS_DMA_ENGINE_ENABLE (1L<<26) +#define BNX2_MISC_LFSR_MASK_BITS_UMP_ENABLE (1L<<27) + +#define BNX2_MISC_ARB_REQ0 0x0000082c +#define BNX2_MISC_ARB_REQ1 0x00000830 +#define BNX2_MISC_ARB_REQ2 0x00000834 +#define BNX2_MISC_ARB_REQ3 0x00000838 +#define BNX2_MISC_ARB_REQ4 0x0000083c +#define BNX2_MISC_ARB_FREE0 0x00000840 +#define BNX2_MISC_ARB_FREE1 0x00000844 +#define BNX2_MISC_ARB_FREE2 0x00000848 +#define BNX2_MISC_ARB_FREE3 0x0000084c +#define BNX2_MISC_ARB_FREE4 0x00000850 +#define BNX2_MISC_ARB_REQ_STATUS0 0x00000854 +#define BNX2_MISC_ARB_REQ_STATUS1 0x00000858 +#define BNX2_MISC_ARB_REQ_STATUS2 0x0000085c +#define BNX2_MISC_ARB_REQ_STATUS3 0x00000860 +#define BNX2_MISC_ARB_REQ_STATUS4 0x00000864 +#define BNX2_MISC_ARB_GNT0 0x00000868 +#define BNX2_MISC_ARB_GNT0_0 (0x7L<<0) +#define BNX2_MISC_ARB_GNT0_1 (0x7L<<4) +#define BNX2_MISC_ARB_GNT0_2 (0x7L<<8) +#define BNX2_MISC_ARB_GNT0_3 (0x7L<<12) +#define BNX2_MISC_ARB_GNT0_4 (0x7L<<16) +#define BNX2_MISC_ARB_GNT0_5 (0x7L<<20) +#define BNX2_MISC_ARB_GNT0_6 (0x7L<<24) +#define BNX2_MISC_ARB_GNT0_7 (0x7L<<28) + +#define BNX2_MISC_ARB_GNT1 0x0000086c +#define BNX2_MISC_ARB_GNT1_8 (0x7L<<0) +#define BNX2_MISC_ARB_GNT1_9 (0x7L<<4) +#define BNX2_MISC_ARB_GNT1_10 (0x7L<<8) +#define BNX2_MISC_ARB_GNT1_11 (0x7L<<12) +#define BNX2_MISC_ARB_GNT1_12 (0x7L<<16) +#define BNX2_MISC_ARB_GNT1_13 (0x7L<<20) +#define BNX2_MISC_ARB_GNT1_14 (0x7L<<24) +#define BNX2_MISC_ARB_GNT1_15 (0x7L<<28) + +#define BNX2_MISC_ARB_GNT2 0x00000870 +#define BNX2_MISC_ARB_GNT2_16 (0x7L<<0) +#define BNX2_MISC_ARB_GNT2_17 (0x7L<<4) +#define BNX2_MISC_ARB_GNT2_18 (0x7L<<8) +#define BNX2_MISC_ARB_GNT2_19 (0x7L<<12) +#define BNX2_MISC_ARB_GNT2_20 (0x7L<<16) +#define BNX2_MISC_ARB_GNT2_21 (0x7L<<20) +#define BNX2_MISC_ARB_GNT2_22 (0x7L<<24) +#define BNX2_MISC_ARB_GNT2_23 (0x7L<<28) + +#define BNX2_MISC_ARB_GNT3 0x00000874 +#define BNX2_MISC_ARB_GNT3_24 (0x7L<<0) +#define BNX2_MISC_ARB_GNT3_25 (0x7L<<4) +#define BNX2_MISC_ARB_GNT3_26 (0x7L<<8) +#define BNX2_MISC_ARB_GNT3_27 (0x7L<<12) +#define BNX2_MISC_ARB_GNT3_28 (0x7L<<16) +#define BNX2_MISC_ARB_GNT3_29 (0x7L<<20) +#define BNX2_MISC_ARB_GNT3_30 (0x7L<<24) +#define BNX2_MISC_ARB_GNT3_31 (0x7L<<28) + +#define BNX2_MISC_PRBS_CONTROL 0x00000878 +#define BNX2_MISC_PRBS_CONTROL_EN (1L<<0) +#define BNX2_MISC_PRBS_CONTROL_RSTB (1L<<1) +#define BNX2_MISC_PRBS_CONTROL_INV (1L<<2) +#define BNX2_MISC_PRBS_CONTROL_ERR_CLR (1L<<3) +#define BNX2_MISC_PRBS_CONTROL_ORDER (0x3L<<4) +#define BNX2_MISC_PRBS_CONTROL_ORDER_7TH (0L<<4) +#define BNX2_MISC_PRBS_CONTROL_ORDER_15TH (1L<<4) +#define BNX2_MISC_PRBS_CONTROL_ORDER_23RD (2L<<4) +#define BNX2_MISC_PRBS_CONTROL_ORDER_31ST (3L<<4) + +#define BNX2_MISC_PRBS_STATUS 0x0000087c +#define BNX2_MISC_PRBS_STATUS_LOCK (1L<<0) +#define BNX2_MISC_PRBS_STATUS_STKY (1L<<1) +#define BNX2_MISC_PRBS_STATUS_ERRORS (0x3fffL<<2) +#define BNX2_MISC_PRBS_STATUS_STATE (0xfL<<16) + +#define BNX2_MISC_SM_ASF_CONTROL 0x00000880 +#define BNX2_MISC_SM_ASF_CONTROL_ASF_RST (1L<<0) +#define BNX2_MISC_SM_ASF_CONTROL_TSC_EN (1L<<1) +#define BNX2_MISC_SM_ASF_CONTROL_WG_TO (1L<<2) +#define BNX2_MISC_SM_ASF_CONTROL_HB_TO (1L<<3) +#define BNX2_MISC_SM_ASF_CONTROL_PA_TO (1L<<4) +#define BNX2_MISC_SM_ASF_CONTROL_PL_TO (1L<<5) +#define BNX2_MISC_SM_ASF_CONTROL_RT_TO (1L<<6) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_EVENT (1L<<7) +#define BNX2_MISC_SM_ASF_CONTROL_RES (0xfL<<8) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_EN (1L<<12) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_BB_EN (1L<<13) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_NO_ADDR_FILT (1L<<14) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_AUTOREAD (1L<<15) +#define BNX2_MISC_SM_ASF_CONTROL_NIC_SMB_ADDR1 (0x3fL<<16) +#define BNX2_MISC_SM_ASF_CONTROL_NIC_SMB_ADDR2 (0x3fL<<24) +#define BNX2_MISC_SM_ASF_CONTROL_EN_NIC_SMB_ADDR_0 (1L<<30) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_EARLY_ATTN (1L<<31) + +#define BNX2_MISC_SMB_IN 0x00000884 +#define BNX2_MISC_SMB_IN_DAT_IN (0xffL<<0) +#define BNX2_MISC_SMB_IN_RDY (1L<<8) +#define BNX2_MISC_SMB_IN_DONE (1L<<9) +#define BNX2_MISC_SMB_IN_FIRSTBYTE (1L<<10) +#define BNX2_MISC_SMB_IN_STATUS (0x7L<<11) +#define BNX2_MISC_SMB_IN_STATUS_OK (0x0L<<11) +#define BNX2_MISC_SMB_IN_STATUS_PEC (0x1L<<11) +#define BNX2_MISC_SMB_IN_STATUS_OFLOW (0x2L<<11) +#define BNX2_MISC_SMB_IN_STATUS_STOP (0x3L<<11) +#define BNX2_MISC_SMB_IN_STATUS_TIMEOUT (0x4L<<11) + +#define BNX2_MISC_SMB_OUT 0x00000888 +#define BNX2_MISC_SMB_OUT_DAT_OUT (0xffL<<0) +#define BNX2_MISC_SMB_OUT_RDY (1L<<8) +#define BNX2_MISC_SMB_OUT_START (1L<<9) +#define BNX2_MISC_SMB_OUT_LAST (1L<<10) +#define BNX2_MISC_SMB_OUT_ACC_TYPE (1L<<11) +#define BNX2_MISC_SMB_OUT_ENB_PEC (1L<<12) +#define BNX2_MISC_SMB_OUT_GET_RX_LEN (1L<<13) +#define BNX2_MISC_SMB_OUT_SMB_READ_LEN (0x3fL<<14) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS (0xfL<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_OK (0L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_FIRST_NACK (1L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_SUB_NACK (9L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_UFLOW (2L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_STOP (3L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_TIMEOUT (4L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_FIRST_LOST (5L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_SUB_LOST (0xdL<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_BADACK (0x6L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_SLAVEMODE (1L<<24) +#define BNX2_MISC_SMB_OUT_SMB_OUT_DAT_EN (1L<<25) +#define BNX2_MISC_SMB_OUT_SMB_OUT_DAT_IN (1L<<26) +#define BNX2_MISC_SMB_OUT_SMB_OUT_CLK_EN (1L<<27) +#define BNX2_MISC_SMB_OUT_SMB_OUT_CLK_IN (1L<<28) + +#define BNX2_MISC_SMB_WATCHDOG 0x0000088c +#define BNX2_MISC_SMB_WATCHDOG_WATCHDOG (0xffffL<<0) + +#define BNX2_MISC_SMB_HEARTBEAT 0x00000890 +#define BNX2_MISC_SMB_HEARTBEAT_HEARTBEAT (0xffffL<<0) + +#define BNX2_MISC_SMB_POLL_ASF 0x00000894 +#define BNX2_MISC_SMB_POLL_ASF_POLL_ASF (0xffffL<<0) + +#define BNX2_MISC_SMB_POLL_LEGACY 0x00000898 +#define BNX2_MISC_SMB_POLL_LEGACY_POLL_LEGACY (0xffffL<<0) + +#define BNX2_MISC_SMB_RETRAN 0x0000089c +#define BNX2_MISC_SMB_RETRAN_RETRAN (0xffL<<0) + +#define BNX2_MISC_SMB_TIMESTAMP 0x000008a0 +#define BNX2_MISC_SMB_TIMESTAMP_TIMESTAMP (0xffffffffL<<0) + +#define BNX2_MISC_PERR_ENA0 0x000008a4 +#define BNX2_MISC_PERR_ENA0_COM_MISC_CTXC (1L<<0) +#define BNX2_MISC_PERR_ENA0_COM_MISC_REGF (1L<<1) +#define BNX2_MISC_PERR_ENA0_COM_MISC_SCPAD (1L<<2) +#define BNX2_MISC_PERR_ENA0_CP_MISC_CTXC (1L<<3) +#define BNX2_MISC_PERR_ENA0_CP_MISC_REGF (1L<<4) +#define BNX2_MISC_PERR_ENA0_CP_MISC_SCPAD (1L<<5) +#define BNX2_MISC_PERR_ENA0_CS_MISC_TMEM (1L<<6) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM0 (1L<<7) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM1 (1L<<8) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM2 (1L<<9) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM3 (1L<<10) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM4 (1L<<11) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM5 (1L<<12) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_PGTBL (1L<<13) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR0 (1L<<14) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR1 (1L<<15) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR2 (1L<<16) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR3 (1L<<17) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR4 (1L<<18) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DW0 (1L<<19) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DW1 (1L<<20) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DW2 (1L<<21) +#define BNX2_MISC_PERR_ENA0_HC_MISC_DMA (1L<<22) +#define BNX2_MISC_PERR_ENA0_MCP_MISC_REGF (1L<<23) +#define BNX2_MISC_PERR_ENA0_MCP_MISC_SCPAD (1L<<24) +#define BNX2_MISC_PERR_ENA0_MQ_MISC_CTX (1L<<25) +#define BNX2_MISC_PERR_ENA0_RBDC_MISC (1L<<26) +#define BNX2_MISC_PERR_ENA0_RBUF_MISC_MB (1L<<27) +#define BNX2_MISC_PERR_ENA0_RBUF_MISC_PTR (1L<<28) +#define BNX2_MISC_PERR_ENA0_RDE_MISC_RPC (1L<<29) +#define BNX2_MISC_PERR_ENA0_RDE_MISC_RPM (1L<<30) +#define BNX2_MISC_PERR_ENA0_RV2P_MISC_CB0REGS (1L<<31) + +#define BNX2_MISC_PERR_ENA1 0x000008a8 +#define BNX2_MISC_PERR_ENA1_RV2P_MISC_CB1REGS (1L<<0) +#define BNX2_MISC_PERR_ENA1_RV2P_MISC_P1IRAM (1L<<1) +#define BNX2_MISC_PERR_ENA1_RV2P_MISC_P2IRAM (1L<<2) +#define BNX2_MISC_PERR_ENA1_RXP_MISC_CTXC (1L<<3) +#define BNX2_MISC_PERR_ENA1_RXP_MISC_REGF (1L<<4) +#define BNX2_MISC_PERR_ENA1_RXP_MISC_SCPAD (1L<<5) +#define BNX2_MISC_PERR_ENA1_RXP_MISC_RBUFC (1L<<6) +#define BNX2_MISC_PERR_ENA1_TBDC_MISC (1L<<7) +#define BNX2_MISC_PERR_ENA1_TDMA_MISC (1L<<8) +#define BNX2_MISC_PERR_ENA1_THBUF_MISC_MB0 (1L<<9) +#define BNX2_MISC_PERR_ENA1_THBUF_MISC_MB1 (1L<<10) +#define BNX2_MISC_PERR_ENA1_TPAT_MISC_REGF (1L<<11) +#define BNX2_MISC_PERR_ENA1_TPAT_MISC_SCPAD (1L<<12) +#define BNX2_MISC_PERR_ENA1_TPBUF_MISC_MB (1L<<13) +#define BNX2_MISC_PERR_ENA1_TSCH_MISC_LR (1L<<14) +#define BNX2_MISC_PERR_ENA1_TXP_MISC_CTXC (1L<<15) +#define BNX2_MISC_PERR_ENA1_TXP_MISC_REGF (1L<<16) +#define BNX2_MISC_PERR_ENA1_TXP_MISC_SCPAD (1L<<17) +#define BNX2_MISC_PERR_ENA1_UMP_MISC_FIORX (1L<<18) +#define BNX2_MISC_PERR_ENA1_UMP_MISC_FIOTX (1L<<19) +#define BNX2_MISC_PERR_ENA1_UMP_MISC_RX (1L<<20) +#define BNX2_MISC_PERR_ENA1_UMP_MISC_TX (1L<<21) +#define BNX2_MISC_PERR_ENA1_RDMAQ_MISC (1L<<22) +#define BNX2_MISC_PERR_ENA1_CSQ_MISC (1L<<23) +#define BNX2_MISC_PERR_ENA1_CPQ_MISC (1L<<24) +#define BNX2_MISC_PERR_ENA1_MCPQ_MISC (1L<<25) +#define BNX2_MISC_PERR_ENA1_RV2PMQ_MISC (1L<<26) +#define BNX2_MISC_PERR_ENA1_RV2PPQ_MISC (1L<<27) +#define BNX2_MISC_PERR_ENA1_RV2PTQ_MISC (1L<<28) +#define BNX2_MISC_PERR_ENA1_RXPQ_MISC (1L<<29) +#define BNX2_MISC_PERR_ENA1_RXPCQ_MISC (1L<<30) +#define BNX2_MISC_PERR_ENA1_RLUPQ_MISC (1L<<31) + +#define BNX2_MISC_PERR_ENA2 0x000008ac +#define BNX2_MISC_PERR_ENA2_COMQ_MISC (1L<<0) +#define BNX2_MISC_PERR_ENA2_COMXQ_MISC (1L<<1) +#define BNX2_MISC_PERR_ENA2_COMTQ_MISC (1L<<2) +#define BNX2_MISC_PERR_ENA2_TSCHQ_MISC (1L<<3) +#define BNX2_MISC_PERR_ENA2_TBDRQ_MISC (1L<<4) +#define BNX2_MISC_PERR_ENA2_TXPQ_MISC (1L<<5) +#define BNX2_MISC_PERR_ENA2_TDMAQ_MISC (1L<<6) +#define BNX2_MISC_PERR_ENA2_TPATQ_MISC (1L<<7) +#define BNX2_MISC_PERR_ENA2_TASQ_MISC (1L<<8) + +#define BNX2_MISC_DEBUG_VECTOR_SEL 0x000008b0 +#define BNX2_MISC_DEBUG_VECTOR_SEL_0 (0xfffL<<0) +#define BNX2_MISC_DEBUG_VECTOR_SEL_1 (0xfffL<<12) + +#define BNX2_MISC_VREG_CONTROL 0x000008b4 +#define BNX2_MISC_VREG_CONTROL_1_2 (0xfL<<0) +#define BNX2_MISC_VREG_CONTROL_2_5 (0xfL<<4) + +#define BNX2_MISC_FINAL_CLK_CTL_VAL 0x000008b8 +#define BNX2_MISC_FINAL_CLK_CTL_VAL_MISC_FINAL_CLK_CTL_VAL (0x3ffffffL<<6) + +#define BNX2_MISC_UNUSED0 0x000008bc + + +/* + * nvm_reg definition + * offset: 0x6400 + */ +#define BNX2_NVM_COMMAND 0x00006400 +#define BNX2_NVM_COMMAND_RST (1L<<0) +#define BNX2_NVM_COMMAND_DONE (1L<<3) +#define BNX2_NVM_COMMAND_DOIT (1L<<4) +#define BNX2_NVM_COMMAND_WR (1L<<5) +#define BNX2_NVM_COMMAND_ERASE (1L<<6) +#define BNX2_NVM_COMMAND_FIRST (1L<<7) +#define BNX2_NVM_COMMAND_LAST (1L<<8) +#define BNX2_NVM_COMMAND_WREN (1L<<16) +#define BNX2_NVM_COMMAND_WRDI (1L<<17) +#define BNX2_NVM_COMMAND_EWSR (1L<<18) +#define BNX2_NVM_COMMAND_WRSR (1L<<19) + +#define BNX2_NVM_STATUS 0x00006404 +#define BNX2_NVM_STATUS_PI_FSM_STATE (0xfL<<0) +#define BNX2_NVM_STATUS_EE_FSM_STATE (0xfL<<4) +#define BNX2_NVM_STATUS_EQ_FSM_STATE (0xfL<<8) + +#define BNX2_NVM_WRITE 0x00006408 +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE (0xffffffffL<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_BIT_BANG (0L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_EECLK (1L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_EEDATA (2L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SCLK (4L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_CS_B (8L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SO (16L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SI (32L<<0) + +#define BNX2_NVM_ADDR 0x0000640c +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_BIT_BANG (0L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_EECLK (1L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_EEDATA (2L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SCLK (4L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_CS_B (8L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SO (16L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SI (32L<<0) + +#define BNX2_NVM_READ 0x00006410 +#define BNX2_NVM_READ_NVM_READ_VALUE (0xffffffffL<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_BIT_BANG (0L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_EECLK (1L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_EEDATA (2L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_SCLK (4L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_CS_B (8L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_SO (16L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_SI (32L<<0) + +#define BNX2_NVM_CFG1 0x00006414 +#define BNX2_NVM_CFG1_FLASH_MODE (1L<<0) +#define BNX2_NVM_CFG1_BUFFER_MODE (1L<<1) +#define BNX2_NVM_CFG1_PASS_MODE (1L<<2) +#define BNX2_NVM_CFG1_BITBANG_MODE (1L<<3) +#define BNX2_NVM_CFG1_STATUS_BIT (0x7L<<4) +#define BNX2_NVM_CFG1_STATUS_BIT_FLASH_RDY (0L<<4) +#define BNX2_NVM_CFG1_STATUS_BIT_BUFFER_RDY (7L<<4) +#define BNX2_NVM_CFG1_SPI_CLK_DIV (0xfL<<7) +#define BNX2_NVM_CFG1_SEE_CLK_DIV (0x7ffL<<11) +#define BNX2_NVM_CFG1_PROTECT_MODE (1L<<24) +#define BNX2_NVM_CFG1_FLASH_SIZE (1L<<25) +#define BNX2_NVM_CFG1_COMPAT_BYPASSS (1L<<31) + +#define BNX2_NVM_CFG2 0x00006418 +#define BNX2_NVM_CFG2_ERASE_CMD (0xffL<<0) +#define BNX2_NVM_CFG2_DUMMY (0xffL<<8) +#define BNX2_NVM_CFG2_STATUS_CMD (0xffL<<16) + +#define BNX2_NVM_CFG3 0x0000641c +#define BNX2_NVM_CFG3_BUFFER_RD_CMD (0xffL<<0) +#define BNX2_NVM_CFG3_WRITE_CMD (0xffL<<8) +#define BNX2_NVM_CFG3_BUFFER_WRITE_CMD (0xffL<<16) +#define BNX2_NVM_CFG3_READ_CMD (0xffL<<24) + +#define BNX2_NVM_SW_ARB 0x00006420 +#define BNX2_NVM_SW_ARB_ARB_REQ_SET0 (1L<<0) +#define BNX2_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1) +#define BNX2_NVM_SW_ARB_ARB_REQ_SET2 (1L<<2) +#define BNX2_NVM_SW_ARB_ARB_REQ_SET3 (1L<<3) +#define BNX2_NVM_SW_ARB_ARB_REQ_CLR0 (1L<<4) +#define BNX2_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5) +#define BNX2_NVM_SW_ARB_ARB_REQ_CLR2 (1L<<6) +#define BNX2_NVM_SW_ARB_ARB_REQ_CLR3 (1L<<7) +#define BNX2_NVM_SW_ARB_ARB_ARB0 (1L<<8) +#define BNX2_NVM_SW_ARB_ARB_ARB1 (1L<<9) +#define BNX2_NVM_SW_ARB_ARB_ARB2 (1L<<10) +#define BNX2_NVM_SW_ARB_ARB_ARB3 (1L<<11) +#define BNX2_NVM_SW_ARB_REQ0 (1L<<12) +#define BNX2_NVM_SW_ARB_REQ1 (1L<<13) +#define BNX2_NVM_SW_ARB_REQ2 (1L<<14) +#define BNX2_NVM_SW_ARB_REQ3 (1L<<15) + +#define BNX2_NVM_ACCESS_ENABLE 0x00006424 +#define BNX2_NVM_ACCESS_ENABLE_EN (1L<<0) +#define BNX2_NVM_ACCESS_ENABLE_WR_EN (1L<<1) + +#define BNX2_NVM_WRITE1 0x00006428 +#define BNX2_NVM_WRITE1_WREN_CMD (0xffL<<0) +#define BNX2_NVM_WRITE1_WRDI_CMD (0xffL<<8) +#define BNX2_NVM_WRITE1_SR_DATA (0xffL<<16) + + + +/* + * dma_reg definition + * offset: 0xc00 + */ +#define BNX2_DMA_COMMAND 0x00000c00 +#define BNX2_DMA_COMMAND_ENABLE (1L<<0) + +#define BNX2_DMA_STATUS 0x00000c04 +#define BNX2_DMA_STATUS_PAR_ERROR_STATE (1L<<0) +#define BNX2_DMA_STATUS_READ_TRANSFERS_STAT (1L<<16) +#define BNX2_DMA_STATUS_READ_DELAY_PCI_CLKS_STAT (1L<<17) +#define BNX2_DMA_STATUS_BIG_READ_TRANSFERS_STAT (1L<<18) +#define BNX2_DMA_STATUS_BIG_READ_DELAY_PCI_CLKS_STAT (1L<<19) +#define BNX2_DMA_STATUS_BIG_READ_RETRY_AFTER_DATA_STAT (1L<<20) +#define BNX2_DMA_STATUS_WRITE_TRANSFERS_STAT (1L<<21) +#define BNX2_DMA_STATUS_WRITE_DELAY_PCI_CLKS_STAT (1L<<22) +#define BNX2_DMA_STATUS_BIG_WRITE_TRANSFERS_STAT (1L<<23) +#define BNX2_DMA_STATUS_BIG_WRITE_DELAY_PCI_CLKS_STAT (1L<<24) +#define BNX2_DMA_STATUS_BIG_WRITE_RETRY_AFTER_DATA_STAT (1L<<25) + +#define BNX2_DMA_CONFIG 0x00000c08 +#define BNX2_DMA_CONFIG_DATA_BYTE_SWAP (1L<<0) +#define BNX2_DMA_CONFIG_DATA_WORD_SWAP (1L<<1) +#define BNX2_DMA_CONFIG_CNTL_BYTE_SWAP (1L<<4) +#define BNX2_DMA_CONFIG_CNTL_WORD_SWAP (1L<<5) +#define BNX2_DMA_CONFIG_ONE_DMA (1L<<6) +#define BNX2_DMA_CONFIG_CNTL_TWO_DMA (1L<<7) +#define BNX2_DMA_CONFIG_CNTL_FPGA_MODE (1L<<8) +#define BNX2_DMA_CONFIG_CNTL_PING_PONG_DMA (1L<<10) +#define BNX2_DMA_CONFIG_CNTL_PCI_COMP_DLY (1L<<11) +#define BNX2_DMA_CONFIG_NO_RCHANS_IN_USE (0xfL<<12) +#define BNX2_DMA_CONFIG_NO_WCHANS_IN_USE (0xfL<<16) +#define BNX2_DMA_CONFIG_PCI_CLK_CMP_BITS (0x7L<<20) +#define BNX2_DMA_CONFIG_PCI_FAST_CLK_CMP (1L<<23) +#define BNX2_DMA_CONFIG_BIG_SIZE (0xfL<<24) +#define BNX2_DMA_CONFIG_BIG_SIZE_NONE (0x0L<<24) +#define BNX2_DMA_CONFIG_BIG_SIZE_64 (0x1L<<24) +#define BNX2_DMA_CONFIG_BIG_SIZE_128 (0x2L<<24) +#define BNX2_DMA_CONFIG_BIG_SIZE_256 (0x4L<<24) +#define BNX2_DMA_CONFIG_BIG_SIZE_512 (0x8L<<24) + +#define BNX2_DMA_BLACKOUT 0x00000c0c +#define BNX2_DMA_BLACKOUT_RD_RETRY_BLACKOUT (0xffL<<0) +#define BNX2_DMA_BLACKOUT_2ND_RD_RETRY_BLACKOUT (0xffL<<8) +#define BNX2_DMA_BLACKOUT_WR_RETRY_BLACKOUT (0xffL<<16) + +#define BNX2_DMA_RCHAN_STAT 0x00000c30 +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_0 (0x7L<<0) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_0 (1L<<3) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_1 (0x7L<<4) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_1 (1L<<7) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_2 (0x7L<<8) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_2 (1L<<11) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_3 (0x7L<<12) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_3 (1L<<15) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_4 (0x7L<<16) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_4 (1L<<19) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_5 (0x7L<<20) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_5 (1L<<23) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_6 (0x7L<<24) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_6 (1L<<27) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_7 (0x7L<<28) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_7 (1L<<31) + +#define BNX2_DMA_WCHAN_STAT 0x00000c34 +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_0 (0x7L<<0) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_0 (1L<<3) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_1 (0x7L<<4) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_1 (1L<<7) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_2 (0x7L<<8) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_2 (1L<<11) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_3 (0x7L<<12) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_3 (1L<<15) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_4 (0x7L<<16) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_4 (1L<<19) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_5 (0x7L<<20) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_5 (1L<<23) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_6 (0x7L<<24) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_6 (1L<<27) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_7 (0x7L<<28) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_7 (1L<<31) + +#define BNX2_DMA_RCHAN_ASSIGNMENT 0x00000c38 +#define BNX2_DMA_RCHAN_ASSIGNMENT_0 (0xfL<<0) +#define BNX2_DMA_RCHAN_ASSIGNMENT_1 (0xfL<<4) +#define BNX2_DMA_RCHAN_ASSIGNMENT_2 (0xfL<<8) +#define BNX2_DMA_RCHAN_ASSIGNMENT_3 (0xfL<<12) +#define BNX2_DMA_RCHAN_ASSIGNMENT_4 (0xfL<<16) +#define BNX2_DMA_RCHAN_ASSIGNMENT_5 (0xfL<<20) +#define BNX2_DMA_RCHAN_ASSIGNMENT_6 (0xfL<<24) +#define BNX2_DMA_RCHAN_ASSIGNMENT_7 (0xfL<<28) + +#define BNX2_DMA_WCHAN_ASSIGNMENT 0x00000c3c +#define BNX2_DMA_WCHAN_ASSIGNMENT_0 (0xfL<<0) +#define BNX2_DMA_WCHAN_ASSIGNMENT_1 (0xfL<<4) +#define BNX2_DMA_WCHAN_ASSIGNMENT_2 (0xfL<<8) +#define BNX2_DMA_WCHAN_ASSIGNMENT_3 (0xfL<<12) +#define BNX2_DMA_WCHAN_ASSIGNMENT_4 (0xfL<<16) +#define BNX2_DMA_WCHAN_ASSIGNMENT_5 (0xfL<<20) +#define BNX2_DMA_WCHAN_ASSIGNMENT_6 (0xfL<<24) +#define BNX2_DMA_WCHAN_ASSIGNMENT_7 (0xfL<<28) + +#define BNX2_DMA_RCHAN_STAT_00 0x00000c40 +#define BNX2_DMA_RCHAN_STAT_00_RCHAN_STA_HOST_ADDR_LOW (0xffffffffL<<0) + +#define BNX2_DMA_RCHAN_STAT_01 0x00000c44 +#define BNX2_DMA_RCHAN_STAT_01_RCHAN_STA_HOST_ADDR_HIGH (0xffffffffL<<0) + +#define BNX2_DMA_RCHAN_STAT_02 0x00000c48 +#define BNX2_DMA_RCHAN_STAT_02_LENGTH (0xffffL<<0) +#define BNX2_DMA_RCHAN_STAT_02_WORD_SWAP (1L<<16) +#define BNX2_DMA_RCHAN_STAT_02_BYTE_SWAP (1L<<17) +#define BNX2_DMA_RCHAN_STAT_02_PRIORITY_LVL (1L<<18) + +#define BNX2_DMA_RCHAN_STAT_10 0x00000c4c +#define BNX2_DMA_RCHAN_STAT_11 0x00000c50 +#define BNX2_DMA_RCHAN_STAT_12 0x00000c54 +#define BNX2_DMA_RCHAN_STAT_20 0x00000c58 +#define BNX2_DMA_RCHAN_STAT_21 0x00000c5c +#define BNX2_DMA_RCHAN_STAT_22 0x00000c60 +#define BNX2_DMA_RCHAN_STAT_30 0x00000c64 +#define BNX2_DMA_RCHAN_STAT_31 0x00000c68 +#define BNX2_DMA_RCHAN_STAT_32 0x00000c6c +#define BNX2_DMA_RCHAN_STAT_40 0x00000c70 +#define BNX2_DMA_RCHAN_STAT_41 0x00000c74 +#define BNX2_DMA_RCHAN_STAT_42 0x00000c78 +#define BNX2_DMA_RCHAN_STAT_50 0x00000c7c +#define BNX2_DMA_RCHAN_STAT_51 0x00000c80 +#define BNX2_DMA_RCHAN_STAT_52 0x00000c84 +#define BNX2_DMA_RCHAN_STAT_60 0x00000c88 +#define BNX2_DMA_RCHAN_STAT_61 0x00000c8c +#define BNX2_DMA_RCHAN_STAT_62 0x00000c90 +#define BNX2_DMA_RCHAN_STAT_70 0x00000c94 +#define BNX2_DMA_RCHAN_STAT_71 0x00000c98 +#define BNX2_DMA_RCHAN_STAT_72 0x00000c9c +#define BNX2_DMA_WCHAN_STAT_00 0x00000ca0 +#define BNX2_DMA_WCHAN_STAT_00_WCHAN_STA_HOST_ADDR_LOW (0xffffffffL<<0) + +#define BNX2_DMA_WCHAN_STAT_01 0x00000ca4 +#define BNX2_DMA_WCHAN_STAT_01_WCHAN_STA_HOST_ADDR_HIGH (0xffffffffL<<0) + +#define BNX2_DMA_WCHAN_STAT_02 0x00000ca8 +#define BNX2_DMA_WCHAN_STAT_02_LENGTH (0xffffL<<0) +#define BNX2_DMA_WCHAN_STAT_02_WORD_SWAP (1L<<16) +#define BNX2_DMA_WCHAN_STAT_02_BYTE_SWAP (1L<<17) +#define BNX2_DMA_WCHAN_STAT_02_PRIORITY_LVL (1L<<18) + +#define BNX2_DMA_WCHAN_STAT_10 0x00000cac +#define BNX2_DMA_WCHAN_STAT_11 0x00000cb0 +#define BNX2_DMA_WCHAN_STAT_12 0x00000cb4 +#define BNX2_DMA_WCHAN_STAT_20 0x00000cb8 +#define BNX2_DMA_WCHAN_STAT_21 0x00000cbc +#define BNX2_DMA_WCHAN_STAT_22 0x00000cc0 +#define BNX2_DMA_WCHAN_STAT_30 0x00000cc4 +#define BNX2_DMA_WCHAN_STAT_31 0x00000cc8 +#define BNX2_DMA_WCHAN_STAT_32 0x00000ccc +#define BNX2_DMA_WCHAN_STAT_40 0x00000cd0 +#define BNX2_DMA_WCHAN_STAT_41 0x00000cd4 +#define BNX2_DMA_WCHAN_STAT_42 0x00000cd8 +#define BNX2_DMA_WCHAN_STAT_50 0x00000cdc +#define BNX2_DMA_WCHAN_STAT_51 0x00000ce0 +#define BNX2_DMA_WCHAN_STAT_52 0x00000ce4 +#define BNX2_DMA_WCHAN_STAT_60 0x00000ce8 +#define BNX2_DMA_WCHAN_STAT_61 0x00000cec +#define BNX2_DMA_WCHAN_STAT_62 0x00000cf0 +#define BNX2_DMA_WCHAN_STAT_70 0x00000cf4 +#define BNX2_DMA_WCHAN_STAT_71 0x00000cf8 +#define BNX2_DMA_WCHAN_STAT_72 0x00000cfc +#define BNX2_DMA_ARB_STAT_00 0x00000d00 +#define BNX2_DMA_ARB_STAT_00_MASTER (0xffffL<<0) +#define BNX2_DMA_ARB_STAT_00_MASTER_ENC (0xffL<<16) +#define BNX2_DMA_ARB_STAT_00_CUR_BINMSTR (0xffL<<24) + +#define BNX2_DMA_ARB_STAT_01 0x00000d04 +#define BNX2_DMA_ARB_STAT_01_LPR_RPTR (0xfL<<0) +#define BNX2_DMA_ARB_STAT_01_LPR_WPTR (0xfL<<4) +#define BNX2_DMA_ARB_STAT_01_LPB_RPTR (0xfL<<8) +#define BNX2_DMA_ARB_STAT_01_LPB_WPTR (0xfL<<12) +#define BNX2_DMA_ARB_STAT_01_HPR_RPTR (0xfL<<16) +#define BNX2_DMA_ARB_STAT_01_HPR_WPTR (0xfL<<20) +#define BNX2_DMA_ARB_STAT_01_HPB_RPTR (0xfL<<24) +#define BNX2_DMA_ARB_STAT_01_HPB_WPTR (0xfL<<28) + +#define BNX2_DMA_FUSE_CTRL0_CMD 0x00000f00 +#define BNX2_DMA_FUSE_CTRL0_CMD_PWRUP_DONE (1L<<0) +#define BNX2_DMA_FUSE_CTRL0_CMD_SHIFT_DONE (1L<<1) +#define BNX2_DMA_FUSE_CTRL0_CMD_SHIFT (1L<<2) +#define BNX2_DMA_FUSE_CTRL0_CMD_LOAD (1L<<3) +#define BNX2_DMA_FUSE_CTRL0_CMD_SEL (0xfL<<8) + +#define BNX2_DMA_FUSE_CTRL0_DATA 0x00000f04 +#define BNX2_DMA_FUSE_CTRL1_CMD 0x00000f08 +#define BNX2_DMA_FUSE_CTRL1_CMD_PWRUP_DONE (1L<<0) +#define BNX2_DMA_FUSE_CTRL1_CMD_SHIFT_DONE (1L<<1) +#define BNX2_DMA_FUSE_CTRL1_CMD_SHIFT (1L<<2) +#define BNX2_DMA_FUSE_CTRL1_CMD_LOAD (1L<<3) +#define BNX2_DMA_FUSE_CTRL1_CMD_SEL (0xfL<<8) + +#define BNX2_DMA_FUSE_CTRL1_DATA 0x00000f0c +#define BNX2_DMA_FUSE_CTRL2_CMD 0x00000f10 +#define BNX2_DMA_FUSE_CTRL2_CMD_PWRUP_DONE (1L<<0) +#define BNX2_DMA_FUSE_CTRL2_CMD_SHIFT_DONE (1L<<1) +#define BNX2_DMA_FUSE_CTRL2_CMD_SHIFT (1L<<2) +#define BNX2_DMA_FUSE_CTRL2_CMD_LOAD (1L<<3) +#define BNX2_DMA_FUSE_CTRL2_CMD_SEL (0xfL<<8) + +#define BNX2_DMA_FUSE_CTRL2_DATA 0x00000f14 + + +/* + * context_reg definition + * offset: 0x1000 + */ +#define BNX2_CTX_COMMAND 0x00001000 +#define BNX2_CTX_COMMAND_ENABLED (1L<<0) + +#define BNX2_CTX_STATUS 0x00001004 +#define BNX2_CTX_STATUS_LOCK_WAIT (1L<<0) +#define BNX2_CTX_STATUS_READ_STAT (1L<<16) +#define BNX2_CTX_STATUS_WRITE_STAT (1L<<17) +#define BNX2_CTX_STATUS_ACC_STALL_STAT (1L<<18) +#define BNX2_CTX_STATUS_LOCK_STALL_STAT (1L<<19) + +#define BNX2_CTX_VIRT_ADDR 0x00001008 +#define BNX2_CTX_VIRT_ADDR_VIRT_ADDR (0x7fffL<<6) + +#define BNX2_CTX_PAGE_TBL 0x0000100c +#define BNX2_CTX_PAGE_TBL_PAGE_TBL (0x3fffL<<6) + +#define BNX2_CTX_DATA_ADR 0x00001010 +#define BNX2_CTX_DATA_ADR_DATA_ADR (0x7ffffL<<2) + +#define BNX2_CTX_DATA 0x00001014 +#define BNX2_CTX_LOCK 0x00001018 +#define BNX2_CTX_LOCK_TYPE (0x7L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_VOID (0x0L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_COMPLETE (0x7L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_PROTOCOL (0x1L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_TX (0x2L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_TIMER (0x4L<<0) +#define BNX2_CTX_LOCK_CID_VALUE (0x3fffL<<7) +#define BNX2_CTX_LOCK_GRANTED (1L<<26) +#define BNX2_CTX_LOCK_MODE (0x7L<<27) +#define BNX2_CTX_LOCK_MODE_UNLOCK (0x0L<<27) +#define BNX2_CTX_LOCK_MODE_IMMEDIATE (0x1L<<27) +#define BNX2_CTX_LOCK_MODE_SURE (0x2L<<27) +#define BNX2_CTX_LOCK_STATUS (1L<<30) +#define BNX2_CTX_LOCK_REQ (1L<<31) + +#define BNX2_CTX_ACCESS_STATUS 0x00001040 +#define BNX2_CTX_ACCESS_STATUS_MASTERENCODED (0xfL<<0) +#define BNX2_CTX_ACCESS_STATUS_ACCESSMEMORYSM (0x3L<<10) +#define BNX2_CTX_ACCESS_STATUS_PAGETABLEINITSM (0x3L<<12) +#define BNX2_CTX_ACCESS_STATUS_ACCESSMEMORYINITSM (0x3L<<14) +#define BNX2_CTX_ACCESS_STATUS_QUALIFIED_REQUEST (0x7ffL<<17) + +#define BNX2_CTX_DBG_LOCK_STATUS 0x00001044 +#define BNX2_CTX_DBG_LOCK_STATUS_SM (0x3ffL<<0) +#define BNX2_CTX_DBG_LOCK_STATUS_MATCH (0x3ffL<<22) + +#define BNX2_CTX_CHNL_LOCK_STATUS_0 0x00001080 +#define BNX2_CTX_CHNL_LOCK_STATUS_0_CID (0x3fffL<<0) +#define BNX2_CTX_CHNL_LOCK_STATUS_0_TYPE (0x3L<<14) +#define BNX2_CTX_CHNL_LOCK_STATUS_0_MODE (1L<<16) + +#define BNX2_CTX_CHNL_LOCK_STATUS_1 0x00001084 +#define BNX2_CTX_CHNL_LOCK_STATUS_2 0x00001088 +#define BNX2_CTX_CHNL_LOCK_STATUS_3 0x0000108c +#define BNX2_CTX_CHNL_LOCK_STATUS_4 0x00001090 +#define BNX2_CTX_CHNL_LOCK_STATUS_5 0x00001094 +#define BNX2_CTX_CHNL_LOCK_STATUS_6 0x00001098 +#define BNX2_CTX_CHNL_LOCK_STATUS_7 0x0000109c +#define BNX2_CTX_CHNL_LOCK_STATUS_8 0x000010a0 + + +/* + * emac_reg definition + * offset: 0x1400 + */ +#define BNX2_EMAC_MODE 0x00001400 +#define BNX2_EMAC_MODE_RESET (1L<<0) +#define BNX2_EMAC_MODE_HALF_DUPLEX (1L<<1) +#define BNX2_EMAC_MODE_PORT (0x3L<<2) +#define BNX2_EMAC_MODE_PORT_NONE (0L<<2) +#define BNX2_EMAC_MODE_PORT_MII (1L<<2) +#define BNX2_EMAC_MODE_PORT_GMII (2L<<2) +#define BNX2_EMAC_MODE_PORT_UNDEF (3L<<2) +#define BNX2_EMAC_MODE_MAC_LOOP (1L<<4) +#define BNX2_EMAC_MODE_TAGGED_MAC_CTL (1L<<7) +#define BNX2_EMAC_MODE_TX_BURST (1L<<8) +#define BNX2_EMAC_MODE_MAX_DEFER_DROP_ENA (1L<<9) +#define BNX2_EMAC_MODE_EXT_LINK_POL (1L<<10) +#define BNX2_EMAC_MODE_FORCE_LINK (1L<<11) +#define BNX2_EMAC_MODE_MPKT (1L<<18) +#define BNX2_EMAC_MODE_MPKT_RCVD (1L<<19) +#define BNX2_EMAC_MODE_ACPI_RCVD (1L<<20) + +#define BNX2_EMAC_STATUS 0x00001404 +#define BNX2_EMAC_STATUS_LINK (1L<<11) +#define BNX2_EMAC_STATUS_LINK_CHANGE (1L<<12) +#define BNX2_EMAC_STATUS_MI_COMPLETE (1L<<22) +#define BNX2_EMAC_STATUS_MI_INT (1L<<23) +#define BNX2_EMAC_STATUS_AP_ERROR (1L<<24) +#define BNX2_EMAC_STATUS_PARITY_ERROR_STATE (1L<<31) + +#define BNX2_EMAC_ATTENTION_ENA 0x00001408 +#define BNX2_EMAC_ATTENTION_ENA_LINK (1L<<11) +#define BNX2_EMAC_ATTENTION_ENA_MI_COMPLETE (1L<<22) +#define BNX2_EMAC_ATTENTION_ENA_MI_INT (1L<<23) +#define BNX2_EMAC_ATTENTION_ENA_AP_ERROR (1L<<24) + +#define BNX2_EMAC_LED 0x0000140c +#define BNX2_EMAC_LED_OVERRIDE (1L<<0) +#define BNX2_EMAC_LED_1000MB_OVERRIDE (1L<<1) +#define BNX2_EMAC_LED_100MB_OVERRIDE (1L<<2) +#define BNX2_EMAC_LED_10MB_OVERRIDE (1L<<3) +#define BNX2_EMAC_LED_TRAFFIC_OVERRIDE (1L<<4) +#define BNX2_EMAC_LED_BLNK_TRAFFIC (1L<<5) +#define BNX2_EMAC_LED_TRAFFIC (1L<<6) +#define BNX2_EMAC_LED_1000MB (1L<<7) +#define BNX2_EMAC_LED_100MB (1L<<8) +#define BNX2_EMAC_LED_10MB (1L<<9) +#define BNX2_EMAC_LED_TRAFFIC_STAT (1L<<10) +#define BNX2_EMAC_LED_BLNK_RATE (0xfffL<<19) +#define BNX2_EMAC_LED_BLNK_RATE_ENA (1L<<31) + +#define BNX2_EMAC_MAC_MATCH0 0x00001410 +#define BNX2_EMAC_MAC_MATCH1 0x00001414 +#define BNX2_EMAC_MAC_MATCH2 0x00001418 +#define BNX2_EMAC_MAC_MATCH3 0x0000141c +#define BNX2_EMAC_MAC_MATCH4 0x00001420 +#define BNX2_EMAC_MAC_MATCH5 0x00001424 +#define BNX2_EMAC_MAC_MATCH6 0x00001428 +#define BNX2_EMAC_MAC_MATCH7 0x0000142c +#define BNX2_EMAC_MAC_MATCH8 0x00001430 +#define BNX2_EMAC_MAC_MATCH9 0x00001434 +#define BNX2_EMAC_MAC_MATCH10 0x00001438 +#define BNX2_EMAC_MAC_MATCH11 0x0000143c +#define BNX2_EMAC_MAC_MATCH12 0x00001440 +#define BNX2_EMAC_MAC_MATCH13 0x00001444 +#define BNX2_EMAC_MAC_MATCH14 0x00001448 +#define BNX2_EMAC_MAC_MATCH15 0x0000144c +#define BNX2_EMAC_MAC_MATCH16 0x00001450 +#define BNX2_EMAC_MAC_MATCH17 0x00001454 +#define BNX2_EMAC_MAC_MATCH18 0x00001458 +#define BNX2_EMAC_MAC_MATCH19 0x0000145c +#define BNX2_EMAC_MAC_MATCH20 0x00001460 +#define BNX2_EMAC_MAC_MATCH21 0x00001464 +#define BNX2_EMAC_MAC_MATCH22 0x00001468 +#define BNX2_EMAC_MAC_MATCH23 0x0000146c +#define BNX2_EMAC_MAC_MATCH24 0x00001470 +#define BNX2_EMAC_MAC_MATCH25 0x00001474 +#define BNX2_EMAC_MAC_MATCH26 0x00001478 +#define BNX2_EMAC_MAC_MATCH27 0x0000147c +#define BNX2_EMAC_MAC_MATCH28 0x00001480 +#define BNX2_EMAC_MAC_MATCH29 0x00001484 +#define BNX2_EMAC_MAC_MATCH30 0x00001488 +#define BNX2_EMAC_MAC_MATCH31 0x0000148c +#define BNX2_EMAC_BACKOFF_SEED 0x00001498 +#define BNX2_EMAC_BACKOFF_SEED_EMAC_BACKOFF_SEED (0x3ffL<<0) + +#define BNX2_EMAC_RX_MTU_SIZE 0x0000149c +#define BNX2_EMAC_RX_MTU_SIZE_MTU_SIZE (0xffffL<<0) +#define BNX2_EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31) + +#define BNX2_EMAC_SERDES_CNTL 0x000014a4 +#define BNX2_EMAC_SERDES_CNTL_RXR (0x7L<<0) +#define BNX2_EMAC_SERDES_CNTL_RXG (0x3L<<3) +#define BNX2_EMAC_SERDES_CNTL_RXCKSEL (1L<<6) +#define BNX2_EMAC_SERDES_CNTL_TXBIAS (0x7L<<7) +#define BNX2_EMAC_SERDES_CNTL_BGMAX (1L<<10) +#define BNX2_EMAC_SERDES_CNTL_BGMIN (1L<<11) +#define BNX2_EMAC_SERDES_CNTL_TXMODE (1L<<12) +#define BNX2_EMAC_SERDES_CNTL_TXEDGE (1L<<13) +#define BNX2_EMAC_SERDES_CNTL_SERDES_MODE (1L<<14) +#define BNX2_EMAC_SERDES_CNTL_PLLTEST (1L<<15) +#define BNX2_EMAC_SERDES_CNTL_CDET_EN (1L<<16) +#define BNX2_EMAC_SERDES_CNTL_TBI_LBK (1L<<17) +#define BNX2_EMAC_SERDES_CNTL_REMOTE_LBK (1L<<18) +#define BNX2_EMAC_SERDES_CNTL_REV_PHASE (1L<<19) +#define BNX2_EMAC_SERDES_CNTL_REGCTL12 (0x3L<<20) +#define BNX2_EMAC_SERDES_CNTL_REGCTL25 (0x3L<<22) + +#define BNX2_EMAC_SERDES_STATUS 0x000014a8 +#define BNX2_EMAC_SERDES_STATUS_RX_STAT (0xffL<<0) +#define BNX2_EMAC_SERDES_STATUS_COMMA_DET (1L<<8) + +#define BNX2_EMAC_MDIO_COMM 0x000014ac +#define BNX2_EMAC_MDIO_COMM_DATA (0xffffL<<0) +#define BNX2_EMAC_MDIO_COMM_REG_ADDR (0x1fL<<16) +#define BNX2_EMAC_MDIO_COMM_PHY_ADDR (0x1fL<<21) +#define BNX2_EMAC_MDIO_COMM_COMMAND (0x3L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_UNDEFINED_0 (0L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_WRITE (1L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_READ (2L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_UNDEFINED_3 (3L<<26) +#define BNX2_EMAC_MDIO_COMM_FAIL (1L<<28) +#define BNX2_EMAC_MDIO_COMM_START_BUSY (1L<<29) +#define BNX2_EMAC_MDIO_COMM_DISEXT (1L<<30) + +#define BNX2_EMAC_MDIO_STATUS 0x000014b0 +#define BNX2_EMAC_MDIO_STATUS_LINK (1L<<0) +#define BNX2_EMAC_MDIO_STATUS_10MB (1L<<1) + +#define BNX2_EMAC_MDIO_MODE 0x000014b4 +#define BNX2_EMAC_MDIO_MODE_SHORT_PREAMBLE (1L<<1) +#define BNX2_EMAC_MDIO_MODE_AUTO_POLL (1L<<4) +#define BNX2_EMAC_MDIO_MODE_BIT_BANG (1L<<8) +#define BNX2_EMAC_MDIO_MODE_MDIO (1L<<9) +#define BNX2_EMAC_MDIO_MODE_MDIO_OE (1L<<10) +#define BNX2_EMAC_MDIO_MODE_MDC (1L<<11) +#define BNX2_EMAC_MDIO_MODE_MDINT (1L<<12) +#define BNX2_EMAC_MDIO_MODE_CLOCK_CNT (0x1fL<<16) + +#define BNX2_EMAC_MDIO_AUTO_STATUS 0x000014b8 +#define BNX2_EMAC_MDIO_AUTO_STATUS_AUTO_ERR (1L<<0) + +#define BNX2_EMAC_TX_MODE 0x000014bc +#define BNX2_EMAC_TX_MODE_RESET (1L<<0) +#define BNX2_EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3) +#define BNX2_EMAC_TX_MODE_FLOW_EN (1L<<4) +#define BNX2_EMAC_TX_MODE_BIG_BACKOFF (1L<<5) +#define BNX2_EMAC_TX_MODE_LONG_PAUSE (1L<<6) +#define BNX2_EMAC_TX_MODE_LINK_AWARE (1L<<7) + +#define BNX2_EMAC_TX_STATUS 0x000014c0 +#define BNX2_EMAC_TX_STATUS_XOFFED (1L<<0) +#define BNX2_EMAC_TX_STATUS_XOFF_SENT (1L<<1) +#define BNX2_EMAC_TX_STATUS_XON_SENT (1L<<2) +#define BNX2_EMAC_TX_STATUS_LINK_UP (1L<<3) +#define BNX2_EMAC_TX_STATUS_UNDERRUN (1L<<4) + +#define BNX2_EMAC_TX_LENGTHS 0x000014c4 +#define BNX2_EMAC_TX_LENGTHS_SLOT (0xffL<<0) +#define BNX2_EMAC_TX_LENGTHS_IPG (0xfL<<8) +#define BNX2_EMAC_TX_LENGTHS_IPG_CRS (0x3L<<12) + +#define BNX2_EMAC_RX_MODE 0x000014c8 +#define BNX2_EMAC_RX_MODE_RESET (1L<<0) +#define BNX2_EMAC_RX_MODE_FLOW_EN (1L<<2) +#define BNX2_EMAC_RX_MODE_KEEP_MAC_CONTROL (1L<<3) +#define BNX2_EMAC_RX_MODE_KEEP_PAUSE (1L<<4) +#define BNX2_EMAC_RX_MODE_ACCEPT_OVERSIZE (1L<<5) +#define BNX2_EMAC_RX_MODE_ACCEPT_RUNTS (1L<<6) +#define BNX2_EMAC_RX_MODE_LLC_CHK (1L<<7) +#define BNX2_EMAC_RX_MODE_PROMISCUOUS (1L<<8) +#define BNX2_EMAC_RX_MODE_NO_CRC_CHK (1L<<9) +#define BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10) +#define BNX2_EMAC_RX_MODE_FILT_BROADCAST (1L<<11) +#define BNX2_EMAC_RX_MODE_SORT_MODE (1L<<12) + +#define BNX2_EMAC_RX_STATUS 0x000014cc +#define BNX2_EMAC_RX_STATUS_FFED (1L<<0) +#define BNX2_EMAC_RX_STATUS_FF_RECEIVED (1L<<1) +#define BNX2_EMAC_RX_STATUS_N_RECEIVED (1L<<2) + +#define BNX2_EMAC_MULTICAST_HASH0 0x000014d0 +#define BNX2_EMAC_MULTICAST_HASH1 0x000014d4 +#define BNX2_EMAC_MULTICAST_HASH2 0x000014d8 +#define BNX2_EMAC_MULTICAST_HASH3 0x000014dc +#define BNX2_EMAC_MULTICAST_HASH4 0x000014e0 +#define BNX2_EMAC_MULTICAST_HASH5 0x000014e4 +#define BNX2_EMAC_MULTICAST_HASH6 0x000014e8 +#define BNX2_EMAC_MULTICAST_HASH7 0x000014ec +#define BNX2_EMAC_RX_STAT_IFHCINOCTETS 0x00001500 +#define BNX2_EMAC_RX_STAT_IFHCINBADOCTETS 0x00001504 +#define BNX2_EMAC_RX_STAT_ETHERSTATSFRAGMENTS 0x00001508 +#define BNX2_EMAC_RX_STAT_IFHCINUCASTPKTS 0x0000150c +#define BNX2_EMAC_RX_STAT_IFHCINMULTICASTPKTS 0x00001510 +#define BNX2_EMAC_RX_STAT_IFHCINBROADCASTPKTS 0x00001514 +#define BNX2_EMAC_RX_STAT_DOT3STATSFCSERRORS 0x00001518 +#define BNX2_EMAC_RX_STAT_DOT3STATSALIGNMENTERRORS 0x0000151c +#define BNX2_EMAC_RX_STAT_DOT3STATSCARRIERSENSEERRORS 0x00001520 +#define BNX2_EMAC_RX_STAT_XONPAUSEFRAMESRECEIVED 0x00001524 +#define BNX2_EMAC_RX_STAT_XOFFPAUSEFRAMESRECEIVED 0x00001528 +#define BNX2_EMAC_RX_STAT_MACCONTROLFRAMESRECEIVED 0x0000152c +#define BNX2_EMAC_RX_STAT_XOFFSTATEENTERED 0x00001530 +#define BNX2_EMAC_RX_STAT_DOT3STATSFRAMESTOOLONG 0x00001534 +#define BNX2_EMAC_RX_STAT_ETHERSTATSJABBERS 0x00001538 +#define BNX2_EMAC_RX_STAT_ETHERSTATSUNDERSIZEPKTS 0x0000153c +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS64OCTETS 0x00001540 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS65OCTETSTO127OCTETS 0x00001544 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS128OCTETSTO255OCTETS 0x00001548 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS256OCTETSTO511OCTETS 0x0000154c +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS512OCTETSTO1023OCTETS 0x00001550 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS1024OCTETSTO1522OCTETS 0x00001554 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS1523OCTETSTO9022OCTETS 0x00001558 +#define BNX2_EMAC_RXMAC_DEBUG0 0x0000155c +#define BNX2_EMAC_RXMAC_DEBUG1 0x00001560 +#define BNX2_EMAC_RXMAC_DEBUG1_LENGTH_NE_BYTE_COUNT (1L<<0) +#define BNX2_EMAC_RXMAC_DEBUG1_LENGTH_OUT_RANGE (1L<<1) +#define BNX2_EMAC_RXMAC_DEBUG1_BAD_CRC (1L<<2) +#define BNX2_EMAC_RXMAC_DEBUG1_RX_ERROR (1L<<3) +#define BNX2_EMAC_RXMAC_DEBUG1_ALIGN_ERROR (1L<<4) +#define BNX2_EMAC_RXMAC_DEBUG1_LAST_DATA (1L<<5) +#define BNX2_EMAC_RXMAC_DEBUG1_ODD_BYTE_START (1L<<6) +#define BNX2_EMAC_RXMAC_DEBUG1_BYTE_COUNT (0xffffL<<7) +#define BNX2_EMAC_RXMAC_DEBUG1_SLOT_TIME (0xffL<<23) + +#define BNX2_EMAC_RXMAC_DEBUG2 0x00001564 +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE (0x7L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_IDLE (0x0L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_SFD (0x1L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_DATA (0x2L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_SKEEP (0x3L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_EXT (0x4L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_DROP (0x5L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_SDROP (0x6L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_FC (0x7L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE (0xfL<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_IDLE (0x0L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA0 (0x1L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA1 (0x2L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA2 (0x3L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA3 (0x4L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_ABORT (0x5L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_WAIT (0x6L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_STATUS (0x7L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_LAST (0x8L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_BYTE_IN (0xffL<<7) +#define BNX2_EMAC_RXMAC_DEBUG2_FALSEC (1L<<15) +#define BNX2_EMAC_RXMAC_DEBUG2_TAGGED (1L<<16) +#define BNX2_EMAC_RXMAC_DEBUG2_PAUSE_STATE (1L<<18) +#define BNX2_EMAC_RXMAC_DEBUG2_PAUSE_STATE_IDLE (0L<<18) +#define BNX2_EMAC_RXMAC_DEBUG2_PAUSE_STATE_PAUSED (1L<<18) +#define BNX2_EMAC_RXMAC_DEBUG2_SE_COUNTER (0xfL<<19) +#define BNX2_EMAC_RXMAC_DEBUG2_QUANTA (0x1fL<<23) + +#define BNX2_EMAC_RXMAC_DEBUG3 0x00001568 +#define BNX2_EMAC_RXMAC_DEBUG3_PAUSE_CTR (0xffffL<<0) +#define BNX2_EMAC_RXMAC_DEBUG3_TMP_PAUSE_CTR (0xffffL<<16) + +#define BNX2_EMAC_RXMAC_DEBUG4 0x0000156c +#define BNX2_EMAC_RXMAC_DEBUG4_TYPE_FIELD (0xffffL<<0) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE (0x3fL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_IDLE (0x0L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UMAC2 (0x1L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UMAC3 (0x2L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UNI (0x3L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MMAC2 (0x7L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MMAC3 (0x5L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PSA1 (0x6L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PSA2 (0x7L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PSA3 (0x8L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MC2 (0x9L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MC3 (0xaL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MWAIT1 (0xeL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MWAIT2 (0xfL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MCHECK (0x10L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MC (0x11L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BC2 (0x12L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BC3 (0x13L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BSA1 (0x14L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BSA2 (0x15L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BSA3 (0x16L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BTYPE (0x17L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BC (0x18L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PTYPE (0x19L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_CMD (0x1aL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MAC (0x1bL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_LATCH (0x1cL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_XOFF (0x1dL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_XON (0x1eL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PAUSED (0x1fL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_NPAUSED (0x20L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_TTYPE (0x21L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_TVAL (0x22L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_USA1 (0x23L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_USA2 (0x24L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_USA3 (0x25L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UTYPE (0x26L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UTTYPE (0x27L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UTVAL (0x28L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MTYPE (0x29L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_DROP (0x2aL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_DROP_PKT (1L<<22) +#define BNX2_EMAC_RXMAC_DEBUG4_SLOT_FILLED (1L<<23) +#define BNX2_EMAC_RXMAC_DEBUG4_FALSE_CARRIER (1L<<24) +#define BNX2_EMAC_RXMAC_DEBUG4_LAST_DATA (1L<<25) +#define BNX2_EMAC_RXMAC_DEBUG4_sfd_FOUND (1L<<26) +#define BNX2_EMAC_RXMAC_DEBUG4_ADVANCE (1L<<27) +#define BNX2_EMAC_RXMAC_DEBUG4_START (1L<<28) + +#define BNX2_EMAC_RXMAC_DEBUG5 0x00001570 +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM (0x7L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_IDLE (0L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_WAIT_EOF (1L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_WAIT_STAT (2L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_SET_EOF4FCRC (3L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_SET_EOF4RDE (4L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_SET_EOF4ALL (5L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_1WD_WAIT_STAT (6L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1 (0x7L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_VDW (0x0L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_STAT (0x1L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_AEOF (0x2L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_NEOF (0x3L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_SOF (0x4L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_SAEOF (0x6L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_SNEOF (0x7L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_EOF_DETECTED (1L<<7) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF0 (0x7L<<8) +#define BNX2_EMAC_RXMAC_DEBUG5_RPM_IDI_FIFO_FULL (1L<<11) +#define BNX2_EMAC_RXMAC_DEBUG5_LOAD_CCODE (1L<<12) +#define BNX2_EMAC_RXMAC_DEBUG5_LOAD_DATA (1L<<13) +#define BNX2_EMAC_RXMAC_DEBUG5_LOAD_STAT (1L<<14) +#define BNX2_EMAC_RXMAC_DEBUG5_CLR_STAT (1L<<15) +#define BNX2_EMAC_RXMAC_DEBUG5_IDI_RPM_CCODE (0x3L<<16) +#define BNX2_EMAC_RXMAC_DEBUG5_IDI_RPM_ACCEPT (1L<<19) +#define BNX2_EMAC_RXMAC_DEBUG5_FMLEN (0xfffL<<20) + +#define BNX2_EMAC_RX_STAT_AC0 0x00001580 +#define BNX2_EMAC_RX_STAT_AC1 0x00001584 +#define BNX2_EMAC_RX_STAT_AC2 0x00001588 +#define BNX2_EMAC_RX_STAT_AC3 0x0000158c +#define BNX2_EMAC_RX_STAT_AC4 0x00001590 +#define BNX2_EMAC_RX_STAT_AC5 0x00001594 +#define BNX2_EMAC_RX_STAT_AC6 0x00001598 +#define BNX2_EMAC_RX_STAT_AC7 0x0000159c +#define BNX2_EMAC_RX_STAT_AC8 0x000015a0 +#define BNX2_EMAC_RX_STAT_AC9 0x000015a4 +#define BNX2_EMAC_RX_STAT_AC10 0x000015a8 +#define BNX2_EMAC_RX_STAT_AC11 0x000015ac +#define BNX2_EMAC_RX_STAT_AC12 0x000015b0 +#define BNX2_EMAC_RX_STAT_AC13 0x000015b4 +#define BNX2_EMAC_RX_STAT_AC14 0x000015b8 +#define BNX2_EMAC_RX_STAT_AC15 0x000015bc +#define BNX2_EMAC_RX_STAT_AC16 0x000015c0 +#define BNX2_EMAC_RX_STAT_AC17 0x000015c4 +#define BNX2_EMAC_RX_STAT_AC18 0x000015c8 +#define BNX2_EMAC_RX_STAT_AC19 0x000015cc +#define BNX2_EMAC_RX_STAT_AC20 0x000015d0 +#define BNX2_EMAC_RX_STAT_AC21 0x000015d4 +#define BNX2_EMAC_RX_STAT_AC22 0x000015d8 +#define BNX2_EMAC_RXMAC_SUC_DBG_OVERRUNVEC 0x000015dc +#define BNX2_EMAC_TX_STAT_IFHCOUTOCTETS 0x00001600 +#define BNX2_EMAC_TX_STAT_IFHCOUTBADOCTETS 0x00001604 +#define BNX2_EMAC_TX_STAT_ETHERSTATSCOLLISIONS 0x00001608 +#define BNX2_EMAC_TX_STAT_OUTXONSENT 0x0000160c +#define BNX2_EMAC_TX_STAT_OUTXOFFSENT 0x00001610 +#define BNX2_EMAC_TX_STAT_FLOWCONTROLDONE 0x00001614 +#define BNX2_EMAC_TX_STAT_DOT3STATSSINGLECOLLISIONFRAMES 0x00001618 +#define BNX2_EMAC_TX_STAT_DOT3STATSMULTIPLECOLLISIONFRAMES 0x0000161c +#define BNX2_EMAC_TX_STAT_DOT3STATSDEFERREDTRANSMISSIONS 0x00001620 +#define BNX2_EMAC_TX_STAT_DOT3STATSEXCESSIVECOLLISIONS 0x00001624 +#define BNX2_EMAC_TX_STAT_DOT3STATSLATECOLLISIONS 0x00001628 +#define BNX2_EMAC_TX_STAT_IFHCOUTUCASTPKTS 0x0000162c +#define BNX2_EMAC_TX_STAT_IFHCOUTMULTICASTPKTS 0x00001630 +#define BNX2_EMAC_TX_STAT_IFHCOUTBROADCASTPKTS 0x00001634 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS64OCTETS 0x00001638 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS65OCTETSTO127OCTETS 0x0000163c +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS128OCTETSTO255OCTETS 0x00001640 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS256OCTETSTO511OCTETS 0x00001644 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS512OCTETSTO1023OCTETS 0x00001648 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS1024OCTETSTO1522OCTETS 0x0000164c +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS1523OCTETSTO9022OCTETS 0x00001650 +#define BNX2_EMAC_TX_STAT_DOT3STATSINTERNALMACTRANSMITERRORS 0x00001654 +#define BNX2_EMAC_TXMAC_DEBUG0 0x00001658 +#define BNX2_EMAC_TXMAC_DEBUG1 0x0000165c +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE (0xfL<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_IDLE (0x0L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_START0 (0x1L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA0 (0x4L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA1 (0x5L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA2 (0x6L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA3 (0x7L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_WAIT0 (0x8L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_WAIT1 (0x9L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_CRS_ENABLE (1L<<4) +#define BNX2_EMAC_TXMAC_DEBUG1_BAD_CRC (1L<<5) +#define BNX2_EMAC_TXMAC_DEBUG1_SE_COUNTER (0xfL<<6) +#define BNX2_EMAC_TXMAC_DEBUG1_SEND_PAUSE (1L<<10) +#define BNX2_EMAC_TXMAC_DEBUG1_LATE_COLLISION (1L<<11) +#define BNX2_EMAC_TXMAC_DEBUG1_MAX_DEFER (1L<<12) +#define BNX2_EMAC_TXMAC_DEBUG1_DEFERRED (1L<<13) +#define BNX2_EMAC_TXMAC_DEBUG1_ONE_BYTE (1L<<14) +#define BNX2_EMAC_TXMAC_DEBUG1_IPG_TIME (0xfL<<15) +#define BNX2_EMAC_TXMAC_DEBUG1_SLOT_TIME (0xffL<<19) + +#define BNX2_EMAC_TXMAC_DEBUG2 0x00001660 +#define BNX2_EMAC_TXMAC_DEBUG2_BACK_OFF (0x3ffL<<0) +#define BNX2_EMAC_TXMAC_DEBUG2_BYTE_COUNT (0xffffL<<10) +#define BNX2_EMAC_TXMAC_DEBUG2_COL_COUNT (0x1fL<<26) +#define BNX2_EMAC_TXMAC_DEBUG2_COL_BIT (1L<<31) + +#define BNX2_EMAC_TXMAC_DEBUG3 0x00001664 +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE (0xfL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_IDLE (0x0L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_PRE1 (0x1L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_PRE2 (0x2L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_SFD (0x3L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_DATA (0x4L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_CRC1 (0x5L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_CRC2 (0x6L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_EXT (0x7L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_STATB (0x8L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_STATG (0x9L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_JAM (0xaL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_EJAM (0xbL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_BJAM (0xcL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_SWAIT (0xdL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_BACKOFF (0xeL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE (0x7L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_IDLE (0x0L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_WAIT (0x1L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_UNI (0x2L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_MC (0x3L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_BC2 (0x4L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_BC3 (0x5L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_BC (0x6L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_CRS_DONE (1L<<7) +#define BNX2_EMAC_TXMAC_DEBUG3_XOFF (1L<<8) +#define BNX2_EMAC_TXMAC_DEBUG3_SE_COUNTER (0xfL<<9) +#define BNX2_EMAC_TXMAC_DEBUG3_QUANTA_COUNTER (0x1fL<<13) + +#define BNX2_EMAC_TXMAC_DEBUG4 0x00001668 +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_COUNTER (0xffffL<<0) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE (0xfL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_IDLE (0x0L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_MCA1 (0x2L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_MCA2 (0x3L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_MCA3 (0x6L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC1 (0x7L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC2 (0x5L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC3 (0x4L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_TYPE (0xcL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CMD (0xeL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_TIME (0xaL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CRC1 (0x8L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CRC2 (0x9L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_WAIT (0xdL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_STATS0_VALID (1L<<20) +#define BNX2_EMAC_TXMAC_DEBUG4_APPEND_CRC (1L<<21) +#define BNX2_EMAC_TXMAC_DEBUG4_SLOT_FILLED (1L<<22) +#define BNX2_EMAC_TXMAC_DEBUG4_MAX_DEFER (1L<<23) +#define BNX2_EMAC_TXMAC_DEBUG4_SEND_EXTEND (1L<<24) +#define BNX2_EMAC_TXMAC_DEBUG4_SEND_PADDING (1L<<25) +#define BNX2_EMAC_TXMAC_DEBUG4_EOF_LOC (1L<<26) +#define BNX2_EMAC_TXMAC_DEBUG4_COLLIDING (1L<<27) +#define BNX2_EMAC_TXMAC_DEBUG4_COL_IN (1L<<28) +#define BNX2_EMAC_TXMAC_DEBUG4_BURSTING (1L<<29) +#define BNX2_EMAC_TXMAC_DEBUG4_ADVANCE (1L<<30) +#define BNX2_EMAC_TXMAC_DEBUG4_GO (1L<<31) + +#define BNX2_EMAC_TX_STAT_AC0 0x00001680 +#define BNX2_EMAC_TX_STAT_AC1 0x00001684 +#define BNX2_EMAC_TX_STAT_AC2 0x00001688 +#define BNX2_EMAC_TX_STAT_AC3 0x0000168c +#define BNX2_EMAC_TX_STAT_AC4 0x00001690 +#define BNX2_EMAC_TX_STAT_AC5 0x00001694 +#define BNX2_EMAC_TX_STAT_AC6 0x00001698 +#define BNX2_EMAC_TX_STAT_AC7 0x0000169c +#define BNX2_EMAC_TX_STAT_AC8 0x000016a0 +#define BNX2_EMAC_TX_STAT_AC9 0x000016a4 +#define BNX2_EMAC_TX_STAT_AC10 0x000016a8 +#define BNX2_EMAC_TX_STAT_AC11 0x000016ac +#define BNX2_EMAC_TX_STAT_AC12 0x000016b0 +#define BNX2_EMAC_TX_STAT_AC13 0x000016b4 +#define BNX2_EMAC_TX_STAT_AC14 0x000016b8 +#define BNX2_EMAC_TX_STAT_AC15 0x000016bc +#define BNX2_EMAC_TX_STAT_AC16 0x000016c0 +#define BNX2_EMAC_TX_STAT_AC17 0x000016c4 +#define BNX2_EMAC_TX_STAT_AC18 0x000016c8 +#define BNX2_EMAC_TX_STAT_AC19 0x000016cc +#define BNX2_EMAC_TX_STAT_AC20 0x000016d0 +#define BNX2_EMAC_TX_STAT_AC21 0x000016d4 +#define BNX2_EMAC_TXMAC_SUC_DBG_OVERRUNVEC 0x000016d8 + + +/* + * rpm_reg definition + * offset: 0x1800 + */ +#define BNX2_RPM_COMMAND 0x00001800 +#define BNX2_RPM_COMMAND_ENABLED (1L<<0) +#define BNX2_RPM_COMMAND_OVERRUN_ABORT (1L<<4) + +#define BNX2_RPM_STATUS 0x00001804 +#define BNX2_RPM_STATUS_MBUF_WAIT (1L<<0) +#define BNX2_RPM_STATUS_FREE_WAIT (1L<<1) + +#define BNX2_RPM_CONFIG 0x00001808 +#define BNX2_RPM_CONFIG_NO_PSD_HDR_CKSUM (1L<<0) +#define BNX2_RPM_CONFIG_ACPI_ENA (1L<<1) +#define BNX2_RPM_CONFIG_ACPI_KEEP (1L<<2) +#define BNX2_RPM_CONFIG_MP_KEEP (1L<<3) +#define BNX2_RPM_CONFIG_SORT_VECT_VAL (0xfL<<4) +#define BNX2_RPM_CONFIG_IGNORE_VLAN (1L<<31) + +#define BNX2_RPM_VLAN_MATCH0 0x00001810 +#define BNX2_RPM_VLAN_MATCH0_RPM_VLAN_MTCH0_VALUE (0xfffL<<0) + +#define BNX2_RPM_VLAN_MATCH1 0x00001814 +#define BNX2_RPM_VLAN_MATCH1_RPM_VLAN_MTCH1_VALUE (0xfffL<<0) + +#define BNX2_RPM_VLAN_MATCH2 0x00001818 +#define BNX2_RPM_VLAN_MATCH2_RPM_VLAN_MTCH2_VALUE (0xfffL<<0) + +#define BNX2_RPM_VLAN_MATCH3 0x0000181c +#define BNX2_RPM_VLAN_MATCH3_RPM_VLAN_MTCH3_VALUE (0xfffL<<0) + +#define BNX2_RPM_SORT_USER0 0x00001820 +#define BNX2_RPM_SORT_USER0_PM_EN (0xffffL<<0) +#define BNX2_RPM_SORT_USER0_BC_EN (1L<<16) +#define BNX2_RPM_SORT_USER0_MC_EN (1L<<17) +#define BNX2_RPM_SORT_USER0_MC_HSH_EN (1L<<18) +#define BNX2_RPM_SORT_USER0_PROM_EN (1L<<19) +#define BNX2_RPM_SORT_USER0_VLAN_EN (0xfL<<20) +#define BNX2_RPM_SORT_USER0_PROM_VLAN (1L<<24) +#define BNX2_RPM_SORT_USER0_ENA (1L<<31) + +#define BNX2_RPM_SORT_USER1 0x00001824 +#define BNX2_RPM_SORT_USER1_PM_EN (0xffffL<<0) +#define BNX2_RPM_SORT_USER1_BC_EN (1L<<16) +#define BNX2_RPM_SORT_USER1_MC_EN (1L<<17) +#define BNX2_RPM_SORT_USER1_MC_HSH_EN (1L<<18) +#define BNX2_RPM_SORT_USER1_PROM_EN (1L<<19) +#define BNX2_RPM_SORT_USER1_VLAN_EN (0xfL<<20) +#define BNX2_RPM_SORT_USER1_PROM_VLAN (1L<<24) +#define BNX2_RPM_SORT_USER1_ENA (1L<<31) + +#define BNX2_RPM_SORT_USER2 0x00001828 +#define BNX2_RPM_SORT_USER2_PM_EN (0xffffL<<0) +#define BNX2_RPM_SORT_USER2_BC_EN (1L<<16) +#define BNX2_RPM_SORT_USER2_MC_EN (1L<<17) +#define BNX2_RPM_SORT_USER2_MC_HSH_EN (1L<<18) +#define BNX2_RPM_SORT_USER2_PROM_EN (1L<<19) +#define BNX2_RPM_SORT_USER2_VLAN_EN (0xfL<<20) +#define BNX2_RPM_SORT_USER2_PROM_VLAN (1L<<24) +#define BNX2_RPM_SORT_USER2_ENA (1L<<31) + +#define BNX2_RPM_SORT_USER3 0x0000182c +#define BNX2_RPM_SORT_USER3_PM_EN (0xffffL<<0) +#define BNX2_RPM_SORT_USER3_BC_EN (1L<<16) +#define BNX2_RPM_SORT_USER3_MC_EN (1L<<17) +#define BNX2_RPM_SORT_USER3_MC_HSH_EN (1L<<18) +#define BNX2_RPM_SORT_USER3_PROM_EN (1L<<19) +#define BNX2_RPM_SORT_USER3_VLAN_EN (0xfL<<20) +#define BNX2_RPM_SORT_USER3_PROM_VLAN (1L<<24) +#define BNX2_RPM_SORT_USER3_ENA (1L<<31) + +#define BNX2_RPM_STAT_L2_FILTER_DISCARDS 0x00001840 +#define BNX2_RPM_STAT_RULE_CHECKER_DISCARDS 0x00001844 +#define BNX2_RPM_STAT_IFINFTQDISCARDS 0x00001848 +#define BNX2_RPM_STAT_IFINMBUFDISCARD 0x0000184c +#define BNX2_RPM_STAT_RULE_CHECKER_P4_HIT 0x00001850 +#define BNX2_RPM_STAT_AC0 0x00001880 +#define BNX2_RPM_STAT_AC1 0x00001884 +#define BNX2_RPM_STAT_AC2 0x00001888 +#define BNX2_RPM_STAT_AC3 0x0000188c +#define BNX2_RPM_STAT_AC4 0x00001890 +#define BNX2_RPM_RC_CNTL_0 0x00001900 +#define BNX2_RPM_RC_CNTL_0_OFFSET (0xffL<<0) +#define BNX2_RPM_RC_CNTL_0_CLASS (0x7L<<8) +#define BNX2_RPM_RC_CNTL_0_PRIORITY (1L<<11) +#define BNX2_RPM_RC_CNTL_0_P4 (1L<<12) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE (0x7L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_START (0L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_IP (1L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_TCP (2L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_UDP (3L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_DATA (4L<<13) +#define BNX2_RPM_RC_CNTL_0_COMP (0x3L<<16) +#define BNX2_RPM_RC_CNTL_0_COMP_EQUAL (0L<<16) +#define BNX2_RPM_RC_CNTL_0_COMP_NEQUAL (1L<<16) +#define BNX2_RPM_RC_CNTL_0_COMP_GREATER (2L<<16) +#define BNX2_RPM_RC_CNTL_0_COMP_LESS (3L<<16) +#define BNX2_RPM_RC_CNTL_0_SBIT (1L<<19) +#define BNX2_RPM_RC_CNTL_0_CMDSEL (0xfL<<20) +#define BNX2_RPM_RC_CNTL_0_MAP (1L<<24) +#define BNX2_RPM_RC_CNTL_0_DISCARD (1L<<25) +#define BNX2_RPM_RC_CNTL_0_MASK (1L<<26) +#define BNX2_RPM_RC_CNTL_0_P1 (1L<<27) +#define BNX2_RPM_RC_CNTL_0_P2 (1L<<28) +#define BNX2_RPM_RC_CNTL_0_P3 (1L<<29) +#define BNX2_RPM_RC_CNTL_0_NBIT (1L<<30) + +#define BNX2_RPM_RC_VALUE_MASK_0 0x00001904 +#define BNX2_RPM_RC_VALUE_MASK_0_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_0_MASK (0xffffL<<16) + +#define BNX2_RPM_RC_CNTL_1 0x00001908 +#define BNX2_RPM_RC_CNTL_1_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_1_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_1 0x0000190c +#define BNX2_RPM_RC_CNTL_2 0x00001910 +#define BNX2_RPM_RC_CNTL_2_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_2_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_2 0x00001914 +#define BNX2_RPM_RC_CNTL_3 0x00001918 +#define BNX2_RPM_RC_CNTL_3_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_3_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_3 0x0000191c +#define BNX2_RPM_RC_CNTL_4 0x00001920 +#define BNX2_RPM_RC_CNTL_4_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_4_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_4 0x00001924 +#define BNX2_RPM_RC_CNTL_5 0x00001928 +#define BNX2_RPM_RC_CNTL_5_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_5_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_5 0x0000192c +#define BNX2_RPM_RC_CNTL_6 0x00001930 +#define BNX2_RPM_RC_CNTL_6_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_6_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_6 0x00001934 +#define BNX2_RPM_RC_CNTL_7 0x00001938 +#define BNX2_RPM_RC_CNTL_7_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_7_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_7 0x0000193c +#define BNX2_RPM_RC_CNTL_8 0x00001940 +#define BNX2_RPM_RC_CNTL_8_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_8_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_8 0x00001944 +#define BNX2_RPM_RC_CNTL_9 0x00001948 +#define BNX2_RPM_RC_CNTL_9_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_9_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_9 0x0000194c +#define BNX2_RPM_RC_CNTL_10 0x00001950 +#define BNX2_RPM_RC_CNTL_10_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_10_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_10 0x00001954 +#define BNX2_RPM_RC_CNTL_11 0x00001958 +#define BNX2_RPM_RC_CNTL_11_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_11_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_11 0x0000195c +#define BNX2_RPM_RC_CNTL_12 0x00001960 +#define BNX2_RPM_RC_CNTL_12_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_12_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_12 0x00001964 +#define BNX2_RPM_RC_CNTL_13 0x00001968 +#define BNX2_RPM_RC_CNTL_13_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_13_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_13 0x0000196c +#define BNX2_RPM_RC_CNTL_14 0x00001970 +#define BNX2_RPM_RC_CNTL_14_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_14_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_14 0x00001974 +#define BNX2_RPM_RC_CNTL_15 0x00001978 +#define BNX2_RPM_RC_CNTL_15_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_15_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_15 0x0000197c +#define BNX2_RPM_RC_CONFIG 0x00001980 +#define BNX2_RPM_RC_CONFIG_RULE_ENABLE (0xffffL<<0) +#define BNX2_RPM_RC_CONFIG_DEF_CLASS (0x7L<<24) + +#define BNX2_RPM_DEBUG0 0x00001984 +#define BNX2_RPM_DEBUG0_FM_BCNT (0xffffL<<0) +#define BNX2_RPM_DEBUG0_T_DATA_OFST_VLD (1L<<16) +#define BNX2_RPM_DEBUG0_T_UDP_OFST_VLD (1L<<17) +#define BNX2_RPM_DEBUG0_T_TCP_OFST_VLD (1L<<18) +#define BNX2_RPM_DEBUG0_T_IP_OFST_VLD (1L<<19) +#define BNX2_RPM_DEBUG0_IP_MORE_FRGMT (1L<<20) +#define BNX2_RPM_DEBUG0_T_IP_NO_TCP_UDP_HDR (1L<<21) +#define BNX2_RPM_DEBUG0_LLC_SNAP (1L<<22) +#define BNX2_RPM_DEBUG0_FM_STARTED (1L<<23) +#define BNX2_RPM_DEBUG0_DONE (1L<<24) +#define BNX2_RPM_DEBUG0_WAIT_4_DONE (1L<<25) +#define BNX2_RPM_DEBUG0_USE_TPBUF_CKSUM (1L<<26) +#define BNX2_RPM_DEBUG0_RX_NO_PSD_HDR_CKSUM (1L<<27) +#define BNX2_RPM_DEBUG0_IGNORE_VLAN (1L<<28) +#define BNX2_RPM_DEBUG0_RP_ENA_ACTIVE (1L<<31) + +#define BNX2_RPM_DEBUG1 0x00001988 +#define BNX2_RPM_DEBUG1_FSM_CUR_ST (0xffffL<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_IDLE (0L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B6_ALL (1L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B2_IPLLC (2L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B6_IP (4L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B2_IP (8L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_IP_START (16L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_IP (32L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_TCP (64L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_UDP (128L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_AH (256L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ESP (512L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ESP_PAYLOAD (1024L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_DATA (2048L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ADD_CARRY (0x2000L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ADD_CARRYOUT (0x4000L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_LATCH_RESULT (0x8000L<<0) +#define BNX2_RPM_DEBUG1_HDR_BCNT (0x7ffL<<16) +#define BNX2_RPM_DEBUG1_UNKNOWN_ETYPE_D (1L<<28) +#define BNX2_RPM_DEBUG1_VLAN_REMOVED_D2 (1L<<29) +#define BNX2_RPM_DEBUG1_VLAN_REMOVED_D1 (1L<<30) +#define BNX2_RPM_DEBUG1_EOF_0XTRA_WD (1L<<31) + +#define BNX2_RPM_DEBUG2 0x0000198c +#define BNX2_RPM_DEBUG2_CMD_HIT_VEC (0xffffL<<0) +#define BNX2_RPM_DEBUG2_IP_BCNT (0xffL<<16) +#define BNX2_RPM_DEBUG2_THIS_CMD_M4 (1L<<24) +#define BNX2_RPM_DEBUG2_THIS_CMD_M3 (1L<<25) +#define BNX2_RPM_DEBUG2_THIS_CMD_M2 (1L<<26) +#define BNX2_RPM_DEBUG2_THIS_CMD_M1 (1L<<27) +#define BNX2_RPM_DEBUG2_IPIPE_EMPTY (1L<<28) +#define BNX2_RPM_DEBUG2_FM_DISCARD (1L<<29) +#define BNX2_RPM_DEBUG2_LAST_RULE_IN_FM_D2 (1L<<30) +#define BNX2_RPM_DEBUG2_LAST_RULE_IN_FM_D1 (1L<<31) + +#define BNX2_RPM_DEBUG3 0x00001990 +#define BNX2_RPM_DEBUG3_AVAIL_MBUF_PTR (0x1ffL<<0) +#define BNX2_RPM_DEBUG3_RDE_RLUPQ_WR_REQ_INT (1L<<9) +#define BNX2_RPM_DEBUG3_RDE_RBUF_WR_LAST_INT (1L<<10) +#define BNX2_RPM_DEBUG3_RDE_RBUF_WR_REQ_INT (1L<<11) +#define BNX2_RPM_DEBUG3_RDE_RBUF_FREE_REQ (1L<<12) +#define BNX2_RPM_DEBUG3_RDE_RBUF_ALLOC_REQ (1L<<13) +#define BNX2_RPM_DEBUG3_DFSM_MBUF_NOTAVAIL (1L<<14) +#define BNX2_RPM_DEBUG3_RBUF_RDE_SOF_DROP (1L<<15) +#define BNX2_RPM_DEBUG3_DFIFO_VLD_ENTRY_CT (0xfL<<16) +#define BNX2_RPM_DEBUG3_RDE_SRC_FIFO_ALMFULL (1L<<21) +#define BNX2_RPM_DEBUG3_DROP_NXT_VLD (1L<<22) +#define BNX2_RPM_DEBUG3_DROP_NXT (1L<<23) +#define BNX2_RPM_DEBUG3_FTQ_FSM (0x3L<<24) +#define BNX2_RPM_DEBUG3_FTQ_FSM_IDLE (0x0L<<24) +#define BNX2_RPM_DEBUG3_FTQ_FSM_WAIT_ACK (0x1L<<24) +#define BNX2_RPM_DEBUG3_FTQ_FSM_WAIT_FREE (0x2L<<24) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM (0x3L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_SOF (0x0L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_GET_MBUF (0x1L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_DMA_DATA (0x2L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_DATA (0x3L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_EOF (0x4L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_MF_ACK (0x5L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_DROP_NXT_VLD (0x6L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_DONE (0x7L<<26) +#define BNX2_RPM_DEBUG3_MBFREE_FSM (1L<<29) +#define BNX2_RPM_DEBUG3_MBFREE_FSM_IDLE (0L<<29) +#define BNX2_RPM_DEBUG3_MBFREE_FSM_WAIT_ACK (1L<<29) +#define BNX2_RPM_DEBUG3_MBALLOC_FSM (1L<<30) +#define BNX2_RPM_DEBUG3_MBALLOC_FSM_ET_MBUF (0x0L<<30) +#define BNX2_RPM_DEBUG3_MBALLOC_FSM_IVE_MBUF (0x1L<<30) +#define BNX2_RPM_DEBUG3_CCODE_EOF_ERROR (1L<<31) + +#define BNX2_RPM_DEBUG4 0x00001994 +#define BNX2_RPM_DEBUG4_DFSM_MBUF_CLUSTER (0x1ffffffL<<0) +#define BNX2_RPM_DEBUG4_DFIFO_CUR_CCODE (0x7L<<25) +#define BNX2_RPM_DEBUG4_MBWRITE_FSM (0x7L<<28) +#define BNX2_RPM_DEBUG4_DFIFO_EMPTY (1L<<31) + +#define BNX2_RPM_DEBUG5 0x00001998 +#define BNX2_RPM_DEBUG5_RDROP_WPTR (0x1fL<<0) +#define BNX2_RPM_DEBUG5_RDROP_ACPI_RPTR (0x1fL<<5) +#define BNX2_RPM_DEBUG5_RDROP_MC_RPTR (0x1fL<<10) +#define BNX2_RPM_DEBUG5_RDROP_RC_RPTR (0x1fL<<15) +#define BNX2_RPM_DEBUG5_RDROP_ACPI_EMPTY (1L<<20) +#define BNX2_RPM_DEBUG5_RDROP_MC_EMPTY (1L<<21) +#define BNX2_RPM_DEBUG5_RDROP_AEOF_VEC_AT_RDROP_MC_RPTR (1L<<22) +#define BNX2_RPM_DEBUG5_HOLDREG_WOL_DROP_INT (1L<<23) +#define BNX2_RPM_DEBUG5_HOLDREG_DISCARD (1L<<24) +#define BNX2_RPM_DEBUG5_HOLDREG_MBUF_NOTAVAIL (1L<<25) +#define BNX2_RPM_DEBUG5_HOLDREG_MC_EMPTY (1L<<26) +#define BNX2_RPM_DEBUG5_HOLDREG_RC_EMPTY (1L<<27) +#define BNX2_RPM_DEBUG5_HOLDREG_FC_EMPTY (1L<<28) +#define BNX2_RPM_DEBUG5_HOLDREG_ACPI_EMPTY (1L<<29) +#define BNX2_RPM_DEBUG5_HOLDREG_FULL_T (1L<<30) +#define BNX2_RPM_DEBUG5_HOLDREG_RD (1L<<31) + +#define BNX2_RPM_DEBUG6 0x0000199c +#define BNX2_RPM_DEBUG6_ACPI_VEC (0xffffL<<0) +#define BNX2_RPM_DEBUG6_VEC (0xffffL<<16) + +#define BNX2_RPM_DEBUG7 0x000019a0 +#define BNX2_RPM_DEBUG7_RPM_DBG7_LAST_CRC (0xffffffffL<<0) + +#define BNX2_RPM_DEBUG8 0x000019a4 +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM (0xfL<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_IDLE (0L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_W1_ADDR (1L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_W2_ADDR (2L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_W3_ADDR (3L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_WAIT_THBUF (4L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W3_DATA (5L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W0_ADDR (6L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W1_ADDR (7L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W2_ADDR (8L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W3_ADDR (9L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_WAIT_THBUF (10L<<0) +#define BNX2_RPM_DEBUG8_COMPARE_AT_W0 (1L<<4) +#define BNX2_RPM_DEBUG8_COMPARE_AT_W3_DATA (1L<<5) +#define BNX2_RPM_DEBUG8_COMPARE_AT_SOF_WAIT (1L<<6) +#define BNX2_RPM_DEBUG8_COMPARE_AT_SOF_W3 (1L<<7) +#define BNX2_RPM_DEBUG8_COMPARE_AT_SOF_W2 (1L<<8) +#define BNX2_RPM_DEBUG8_EOF_W_LTEQ6_VLDBYTES (1L<<9) +#define BNX2_RPM_DEBUG8_EOF_W_LTEQ4_VLDBYTES (1L<<10) +#define BNX2_RPM_DEBUG8_NXT_EOF_W_12_VLDBYTES (1L<<11) +#define BNX2_RPM_DEBUG8_EOF_DET (1L<<12) +#define BNX2_RPM_DEBUG8_SOF_DET (1L<<13) +#define BNX2_RPM_DEBUG8_WAIT_4_SOF (1L<<14) +#define BNX2_RPM_DEBUG8_ALL_DONE (1L<<15) +#define BNX2_RPM_DEBUG8_THBUF_ADDR (0x7fL<<16) +#define BNX2_RPM_DEBUG8_BYTE_CTR (0xffL<<24) + +#define BNX2_RPM_DEBUG9 0x000019a8 +#define BNX2_RPM_DEBUG9_OUTFIFO_COUNT (0x7L<<0) +#define BNX2_RPM_DEBUG9_RDE_ACPI_RDY (1L<<3) +#define BNX2_RPM_DEBUG9_VLD_RD_ENTRY_CT (0x7L<<4) +#define BNX2_RPM_DEBUG9_OUTFIFO_OVERRUN_OCCURRED (1L<<28) +#define BNX2_RPM_DEBUG9_INFIFO_OVERRUN_OCCURRED (1L<<29) +#define BNX2_RPM_DEBUG9_ACPI_MATCH_INT (1L<<30) +#define BNX2_RPM_DEBUG9_ACPI_ENABLE_SYN (1L<<31) + +#define BNX2_RPM_ACPI_DBG_BUF_W00 0x000019c0 +#define BNX2_RPM_ACPI_DBG_BUF_W01 0x000019c4 +#define BNX2_RPM_ACPI_DBG_BUF_W02 0x000019c8 +#define BNX2_RPM_ACPI_DBG_BUF_W03 0x000019cc +#define BNX2_RPM_ACPI_DBG_BUF_W10 0x000019d0 +#define BNX2_RPM_ACPI_DBG_BUF_W11 0x000019d4 +#define BNX2_RPM_ACPI_DBG_BUF_W12 0x000019d8 +#define BNX2_RPM_ACPI_DBG_BUF_W13 0x000019dc +#define BNX2_RPM_ACPI_DBG_BUF_W20 0x000019e0 +#define BNX2_RPM_ACPI_DBG_BUF_W21 0x000019e4 +#define BNX2_RPM_ACPI_DBG_BUF_W22 0x000019e8 +#define BNX2_RPM_ACPI_DBG_BUF_W23 0x000019ec +#define BNX2_RPM_ACPI_DBG_BUF_W30 0x000019f0 +#define BNX2_RPM_ACPI_DBG_BUF_W31 0x000019f4 +#define BNX2_RPM_ACPI_DBG_BUF_W32 0x000019f8 +#define BNX2_RPM_ACPI_DBG_BUF_W33 0x000019fc + + +/* + * rbuf_reg definition + * offset: 0x200000 + */ +#define BNX2_RBUF_COMMAND 0x00200000 +#define BNX2_RBUF_COMMAND_ENABLED (1L<<0) +#define BNX2_RBUF_COMMAND_FREE_INIT (1L<<1) +#define BNX2_RBUF_COMMAND_RAM_INIT (1L<<2) +#define BNX2_RBUF_COMMAND_OVER_FREE (1L<<4) +#define BNX2_RBUF_COMMAND_ALLOC_REQ (1L<<5) + +#define BNX2_RBUF_STATUS1 0x00200004 +#define BNX2_RBUF_STATUS1_FREE_COUNT (0x3ffL<<0) + +#define BNX2_RBUF_STATUS2 0x00200008 +#define BNX2_RBUF_STATUS2_FREE_TAIL (0x3ffL<<0) +#define BNX2_RBUF_STATUS2_FREE_HEAD (0x3ffL<<16) + +#define BNX2_RBUF_CONFIG 0x0020000c +#define BNX2_RBUF_CONFIG_XOFF_TRIP (0x3ffL<<0) +#define BNX2_RBUF_CONFIG_XON_TRIP (0x3ffL<<16) + +#define BNX2_RBUF_FW_BUF_ALLOC 0x00200010 +#define BNX2_RBUF_FW_BUF_ALLOC_VALUE (0x1ffL<<7) + +#define BNX2_RBUF_FW_BUF_FREE 0x00200014 +#define BNX2_RBUF_FW_BUF_FREE_COUNT (0x7fL<<0) +#define BNX2_RBUF_FW_BUF_FREE_TAIL (0x1ffL<<7) +#define BNX2_RBUF_FW_BUF_FREE_HEAD (0x1ffL<<16) + +#define BNX2_RBUF_FW_BUF_SEL 0x00200018 +#define BNX2_RBUF_FW_BUF_SEL_COUNT (0x7fL<<0) +#define BNX2_RBUF_FW_BUF_SEL_TAIL (0x1ffL<<7) +#define BNX2_RBUF_FW_BUF_SEL_HEAD (0x1ffL<<16) + +#define BNX2_RBUF_CONFIG2 0x0020001c +#define BNX2_RBUF_CONFIG2_MAC_DROP_TRIP (0x3ffL<<0) +#define BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP (0x3ffL<<16) + +#define BNX2_RBUF_CONFIG3 0x00200020 +#define BNX2_RBUF_CONFIG3_CU_DROP_TRIP (0x3ffL<<0) +#define BNX2_RBUF_CONFIG3_CU_KEEP_TRIP (0x3ffL<<16) + +#define BNX2_RBUF_PKT_DATA 0x00208000 +#define BNX2_RBUF_CLIST_DATA 0x00210000 +#define BNX2_RBUF_BUF_DATA 0x00220000 + + +/* + * rv2p_reg definition + * offset: 0x2800 + */ +#define BNX2_RV2P_COMMAND 0x00002800 +#define BNX2_RV2P_COMMAND_ENABLED (1L<<0) +#define BNX2_RV2P_COMMAND_PROC1_INTRPT (1L<<1) +#define BNX2_RV2P_COMMAND_PROC2_INTRPT (1L<<2) +#define BNX2_RV2P_COMMAND_ABORT0 (1L<<4) +#define BNX2_RV2P_COMMAND_ABORT1 (1L<<5) +#define BNX2_RV2P_COMMAND_ABORT2 (1L<<6) +#define BNX2_RV2P_COMMAND_ABORT3 (1L<<7) +#define BNX2_RV2P_COMMAND_ABORT4 (1L<<8) +#define BNX2_RV2P_COMMAND_ABORT5 (1L<<9) +#define BNX2_RV2P_COMMAND_PROC1_RESET (1L<<16) +#define BNX2_RV2P_COMMAND_PROC2_RESET (1L<<17) +#define BNX2_RV2P_COMMAND_CTXIF_RESET (1L<<18) + +#define BNX2_RV2P_STATUS 0x00002804 +#define BNX2_RV2P_STATUS_ALWAYS_0 (1L<<0) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT0_CNT (1L<<8) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT1_CNT (1L<<9) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT2_CNT (1L<<10) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT3_CNT (1L<<11) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT4_CNT (1L<<12) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT5_CNT (1L<<13) + +#define BNX2_RV2P_CONFIG 0x00002808 +#define BNX2_RV2P_CONFIG_STALL_PROC1 (1L<<0) +#define BNX2_RV2P_CONFIG_STALL_PROC2 (1L<<1) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT0 (1L<<8) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT1 (1L<<9) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT2 (1L<<10) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT3 (1L<<11) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT4 (1L<<12) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT5 (1L<<13) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT0 (1L<<16) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT1 (1L<<17) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT2 (1L<<18) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT3 (1L<<19) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT4 (1L<<20) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT5 (1L<<21) +#define BNX2_RV2P_CONFIG_PAGE_SIZE (0xfL<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_256 (0L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_512 (1L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_1K (2L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_2K (3L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_4K (4L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_8K (5L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_16K (6L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_32K (7L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_64K (8L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_128K (9L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_256K (10L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_512K (11L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_1M (12L<<24) + +#define BNX2_RV2P_GEN_BFR_ADDR_0 0x00002810 +#define BNX2_RV2P_GEN_BFR_ADDR_0_VALUE (0xffffL<<16) + +#define BNX2_RV2P_GEN_BFR_ADDR_1 0x00002814 +#define BNX2_RV2P_GEN_BFR_ADDR_1_VALUE (0xffffL<<16) + +#define BNX2_RV2P_GEN_BFR_ADDR_2 0x00002818 +#define BNX2_RV2P_GEN_BFR_ADDR_2_VALUE (0xffffL<<16) + +#define BNX2_RV2P_GEN_BFR_ADDR_3 0x0000281c +#define BNX2_RV2P_GEN_BFR_ADDR_3_VALUE (0xffffL<<16) + +#define BNX2_RV2P_INSTR_HIGH 0x00002830 +#define BNX2_RV2P_INSTR_HIGH_HIGH (0x1fL<<0) + +#define BNX2_RV2P_INSTR_LOW 0x00002834 +#define BNX2_RV2P_PROC1_ADDR_CMD 0x00002838 +#define BNX2_RV2P_PROC1_ADDR_CMD_ADD (0x3ffL<<0) +#define BNX2_RV2P_PROC1_ADDR_CMD_RDWR (1L<<31) + +#define BNX2_RV2P_PROC2_ADDR_CMD 0x0000283c +#define BNX2_RV2P_PROC2_ADDR_CMD_ADD (0x3ffL<<0) +#define BNX2_RV2P_PROC2_ADDR_CMD_RDWR (1L<<31) + +#define BNX2_RV2P_PROC1_GRC_DEBUG 0x00002840 +#define BNX2_RV2P_PROC2_GRC_DEBUG 0x00002844 +#define BNX2_RV2P_GRC_PROC_DEBUG 0x00002848 +#define BNX2_RV2P_DEBUG_VECT_PEEK 0x0000284c +#define BNX2_RV2P_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_RV2P_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_RV2P_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_RV2P_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_RV2P_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_RV2P_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_RV2P_PFTQ_DATA 0x00002b40 +#define BNX2_RV2P_PFTQ_CMD 0x00002b78 +#define BNX2_RV2P_PFTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_RV2P_PFTQ_CMD_WR_TOP (1L<<10) +#define BNX2_RV2P_PFTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_RV2P_PFTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_RV2P_PFTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_RV2P_PFTQ_CMD_RD_DATA (1L<<26) +#define BNX2_RV2P_PFTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_RV2P_PFTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_RV2P_PFTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_RV2P_PFTQ_CMD_POP (1L<<30) +#define BNX2_RV2P_PFTQ_CMD_BUSY (1L<<31) + +#define BNX2_RV2P_PFTQ_CTL 0x00002b7c +#define BNX2_RV2P_PFTQ_CTL_INTERVENE (1L<<0) +#define BNX2_RV2P_PFTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_RV2P_PFTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_RV2P_PFTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_RV2P_PFTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_RV2P_TFTQ_DATA 0x00002b80 +#define BNX2_RV2P_TFTQ_CMD 0x00002bb8 +#define BNX2_RV2P_TFTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_RV2P_TFTQ_CMD_WR_TOP (1L<<10) +#define BNX2_RV2P_TFTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_RV2P_TFTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_RV2P_TFTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_RV2P_TFTQ_CMD_RD_DATA (1L<<26) +#define BNX2_RV2P_TFTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_RV2P_TFTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_RV2P_TFTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_RV2P_TFTQ_CMD_POP (1L<<30) +#define BNX2_RV2P_TFTQ_CMD_BUSY (1L<<31) + +#define BNX2_RV2P_TFTQ_CTL 0x00002bbc +#define BNX2_RV2P_TFTQ_CTL_INTERVENE (1L<<0) +#define BNX2_RV2P_TFTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_RV2P_TFTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_RV2P_TFTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_RV2P_TFTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_RV2P_MFTQ_DATA 0x00002bc0 +#define BNX2_RV2P_MFTQ_CMD 0x00002bf8 +#define BNX2_RV2P_MFTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_RV2P_MFTQ_CMD_WR_TOP (1L<<10) +#define BNX2_RV2P_MFTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_RV2P_MFTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_RV2P_MFTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_RV2P_MFTQ_CMD_RD_DATA (1L<<26) +#define BNX2_RV2P_MFTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_RV2P_MFTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_RV2P_MFTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_RV2P_MFTQ_CMD_POP (1L<<30) +#define BNX2_RV2P_MFTQ_CMD_BUSY (1L<<31) + +#define BNX2_RV2P_MFTQ_CTL 0x00002bfc +#define BNX2_RV2P_MFTQ_CTL_INTERVENE (1L<<0) +#define BNX2_RV2P_MFTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_RV2P_MFTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_RV2P_MFTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_RV2P_MFTQ_CTL_CUR_DEPTH (0x3ffL<<22) + + + +/* + * mq_reg definition + * offset: 0x3c00 + */ +#define BNX2_MQ_COMMAND 0x00003c00 +#define BNX2_MQ_COMMAND_ENABLED (1L<<0) +#define BNX2_MQ_COMMAND_OVERFLOW (1L<<4) +#define BNX2_MQ_COMMAND_WR_ERROR (1L<<5) +#define BNX2_MQ_COMMAND_RD_ERROR (1L<<6) + +#define BNX2_MQ_STATUS 0x00003c04 +#define BNX2_MQ_STATUS_CTX_ACCESS_STAT (1L<<16) +#define BNX2_MQ_STATUS_CTX_ACCESS64_STAT (1L<<17) +#define BNX2_MQ_STATUS_PCI_STALL_STAT (1L<<18) + +#define BNX2_MQ_CONFIG 0x00003c08 +#define BNX2_MQ_CONFIG_TX_HIGH_PRI (1L<<0) +#define BNX2_MQ_CONFIG_HALT_DIS (1L<<1) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE (0x7L<<4) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256 (0L<<4) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_512 (1L<<4) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_1K (2L<<4) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_2K (3L<<4) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_4K (4L<<4) +#define BNX2_MQ_CONFIG_MAX_DEPTH (0x7fL<<8) +#define BNX2_MQ_CONFIG_CUR_DEPTH (0x7fL<<20) + +#define BNX2_MQ_ENQUEUE1 0x00003c0c +#define BNX2_MQ_ENQUEUE1_OFFSET (0x3fL<<2) +#define BNX2_MQ_ENQUEUE1_CID (0x3fffL<<8) +#define BNX2_MQ_ENQUEUE1_BYTE_MASK (0xfL<<24) +#define BNX2_MQ_ENQUEUE1_KNL_MODE (1L<<28) + +#define BNX2_MQ_ENQUEUE2 0x00003c10 +#define BNX2_MQ_BAD_WR_ADDR 0x00003c14 +#define BNX2_MQ_BAD_RD_ADDR 0x00003c18 +#define BNX2_MQ_KNL_BYP_WIND_START 0x00003c1c +#define BNX2_MQ_KNL_BYP_WIND_START_VALUE (0xfffffL<<12) + +#define BNX2_MQ_KNL_WIND_END 0x00003c20 +#define BNX2_MQ_KNL_WIND_END_VALUE (0xffffffL<<8) + +#define BNX2_MQ_KNL_WRITE_MASK1 0x00003c24 +#define BNX2_MQ_KNL_TX_MASK1 0x00003c28 +#define BNX2_MQ_KNL_CMD_MASK1 0x00003c2c +#define BNX2_MQ_KNL_COND_ENQUEUE_MASK1 0x00003c30 +#define BNX2_MQ_KNL_RX_V2P_MASK1 0x00003c34 +#define BNX2_MQ_KNL_WRITE_MASK2 0x00003c38 +#define BNX2_MQ_KNL_TX_MASK2 0x00003c3c +#define BNX2_MQ_KNL_CMD_MASK2 0x00003c40 +#define BNX2_MQ_KNL_COND_ENQUEUE_MASK2 0x00003c44 +#define BNX2_MQ_KNL_RX_V2P_MASK2 0x00003c48 +#define BNX2_MQ_KNL_BYP_WRITE_MASK1 0x00003c4c +#define BNX2_MQ_KNL_BYP_TX_MASK1 0x00003c50 +#define BNX2_MQ_KNL_BYP_CMD_MASK1 0x00003c54 +#define BNX2_MQ_KNL_BYP_COND_ENQUEUE_MASK1 0x00003c58 +#define BNX2_MQ_KNL_BYP_RX_V2P_MASK1 0x00003c5c +#define BNX2_MQ_KNL_BYP_WRITE_MASK2 0x00003c60 +#define BNX2_MQ_KNL_BYP_TX_MASK2 0x00003c64 +#define BNX2_MQ_KNL_BYP_CMD_MASK2 0x00003c68 +#define BNX2_MQ_KNL_BYP_COND_ENQUEUE_MASK2 0x00003c6c +#define BNX2_MQ_KNL_BYP_RX_V2P_MASK2 0x00003c70 +#define BNX2_MQ_MEM_WR_ADDR 0x00003c74 +#define BNX2_MQ_MEM_WR_ADDR_VALUE (0x3fL<<0) + +#define BNX2_MQ_MEM_WR_DATA0 0x00003c78 +#define BNX2_MQ_MEM_WR_DATA0_VALUE (0xffffffffL<<0) + +#define BNX2_MQ_MEM_WR_DATA1 0x00003c7c +#define BNX2_MQ_MEM_WR_DATA1_VALUE (0xffffffffL<<0) + +#define BNX2_MQ_MEM_WR_DATA2 0x00003c80 +#define BNX2_MQ_MEM_WR_DATA2_VALUE (0x3fffffffL<<0) + +#define BNX2_MQ_MEM_RD_ADDR 0x00003c84 +#define BNX2_MQ_MEM_RD_ADDR_VALUE (0x3fL<<0) + +#define BNX2_MQ_MEM_RD_DATA0 0x00003c88 +#define BNX2_MQ_MEM_RD_DATA0_VALUE (0xffffffffL<<0) + +#define BNX2_MQ_MEM_RD_DATA1 0x00003c8c +#define BNX2_MQ_MEM_RD_DATA1_VALUE (0xffffffffL<<0) + +#define BNX2_MQ_MEM_RD_DATA2 0x00003c90 +#define BNX2_MQ_MEM_RD_DATA2_VALUE (0x3fffffffL<<0) + + + +/* + * tbdr_reg definition + * offset: 0x5000 + */ +#define BNX2_TBDR_COMMAND 0x00005000 +#define BNX2_TBDR_COMMAND_ENABLE (1L<<0) +#define BNX2_TBDR_COMMAND_SOFT_RST (1L<<1) +#define BNX2_TBDR_COMMAND_MSTR_ABORT (1L<<4) + +#define BNX2_TBDR_STATUS 0x00005004 +#define BNX2_TBDR_STATUS_DMA_WAIT (1L<<0) +#define BNX2_TBDR_STATUS_FTQ_WAIT (1L<<1) +#define BNX2_TBDR_STATUS_FIFO_OVERFLOW (1L<<2) +#define BNX2_TBDR_STATUS_FIFO_UNDERFLOW (1L<<3) +#define BNX2_TBDR_STATUS_SEARCHMISS_ERROR (1L<<4) +#define BNX2_TBDR_STATUS_FTQ_ENTRY_CNT (1L<<5) +#define BNX2_TBDR_STATUS_BURST_CNT (1L<<6) + +#define BNX2_TBDR_CONFIG 0x00005008 +#define BNX2_TBDR_CONFIG_MAX_BDS (0xffL<<0) +#define BNX2_TBDR_CONFIG_SWAP_MODE (1L<<8) +#define BNX2_TBDR_CONFIG_PRIORITY (1L<<9) +#define BNX2_TBDR_CONFIG_CACHE_NEXT_PAGE_PTRS (1L<<10) +#define BNX2_TBDR_CONFIG_PAGE_SIZE (0xfL<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_256 (0L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_512 (1L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_1K (2L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_2K (3L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_4K (4L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_8K (5L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_16K (6L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_32K (7L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_64K (8L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_128K (9L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_256K (10L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_512K (11L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_1M (12L<<24) + +#define BNX2_TBDR_DEBUG_VECT_PEEK 0x0000500c +#define BNX2_TBDR_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_TBDR_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_TBDR_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_TBDR_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_TBDR_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_TBDR_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_TBDR_FTQ_DATA 0x000053c0 +#define BNX2_TBDR_FTQ_CMD 0x000053f8 +#define BNX2_TBDR_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_TBDR_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_TBDR_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_TBDR_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_TBDR_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_TBDR_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_TBDR_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_TBDR_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_TBDR_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_TBDR_FTQ_CMD_POP (1L<<30) +#define BNX2_TBDR_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_TBDR_FTQ_CTL 0x000053fc +#define BNX2_TBDR_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_TBDR_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_TBDR_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_TBDR_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_TBDR_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + + + +/* + * tdma_reg definition + * offset: 0x5c00 + */ +#define BNX2_TDMA_COMMAND 0x00005c00 +#define BNX2_TDMA_COMMAND_ENABLED (1L<<0) +#define BNX2_TDMA_COMMAND_MASTER_ABORT (1L<<4) +#define BNX2_TDMA_COMMAND_BAD_L2_LENGTH_ABORT (1L<<7) + +#define BNX2_TDMA_STATUS 0x00005c04 +#define BNX2_TDMA_STATUS_DMA_WAIT (1L<<0) +#define BNX2_TDMA_STATUS_PAYLOAD_WAIT (1L<<1) +#define BNX2_TDMA_STATUS_PATCH_FTQ_WAIT (1L<<2) +#define BNX2_TDMA_STATUS_LOCK_WAIT (1L<<3) +#define BNX2_TDMA_STATUS_FTQ_ENTRY_CNT (1L<<16) +#define BNX2_TDMA_STATUS_BURST_CNT (1L<<17) + +#define BNX2_TDMA_CONFIG 0x00005c08 +#define BNX2_TDMA_CONFIG_ONE_DMA (1L<<0) +#define BNX2_TDMA_CONFIG_ONE_RECORD (1L<<1) +#define BNX2_TDMA_CONFIG_LIMIT_SZ (0xfL<<4) +#define BNX2_TDMA_CONFIG_LIMIT_SZ_64 (0L<<4) +#define BNX2_TDMA_CONFIG_LIMIT_SZ_128 (0x4L<<4) +#define BNX2_TDMA_CONFIG_LIMIT_SZ_256 (0x6L<<4) +#define BNX2_TDMA_CONFIG_LIMIT_SZ_512 (0x8L<<4) +#define BNX2_TDMA_CONFIG_LINE_SZ (0xfL<<8) +#define BNX2_TDMA_CONFIG_LINE_SZ_64 (0L<<8) +#define BNX2_TDMA_CONFIG_LINE_SZ_128 (4L<<8) +#define BNX2_TDMA_CONFIG_LINE_SZ_256 (6L<<8) +#define BNX2_TDMA_CONFIG_LINE_SZ_512 (8L<<8) +#define BNX2_TDMA_CONFIG_ALIGN_ENA (1L<<15) +#define BNX2_TDMA_CONFIG_CHK_L2_BD (1L<<16) +#define BNX2_TDMA_CONFIG_FIFO_CMP (0xfL<<20) + +#define BNX2_TDMA_PAYLOAD_PROD 0x00005c0c +#define BNX2_TDMA_PAYLOAD_PROD_VALUE (0x1fffL<<3) + +#define BNX2_TDMA_DBG_WATCHDOG 0x00005c10 +#define BNX2_TDMA_DBG_TRIGGER 0x00005c14 +#define BNX2_TDMA_DMAD_FSM 0x00005c80 +#define BNX2_TDMA_DMAD_FSM_BD_INVLD (1L<<0) +#define BNX2_TDMA_DMAD_FSM_PUSH (0xfL<<4) +#define BNX2_TDMA_DMAD_FSM_ARB_TBDC (0x3L<<8) +#define BNX2_TDMA_DMAD_FSM_ARB_CTX (1L<<12) +#define BNX2_TDMA_DMAD_FSM_DR_INTF (1L<<16) +#define BNX2_TDMA_DMAD_FSM_DMAD (0x7L<<20) +#define BNX2_TDMA_DMAD_FSM_BD (0xfL<<24) + +#define BNX2_TDMA_DMAD_STATUS 0x00005c84 +#define BNX2_TDMA_DMAD_STATUS_RHOLD_PUSH_ENTRY (0x3L<<0) +#define BNX2_TDMA_DMAD_STATUS_RHOLD_DMAD_ENTRY (0x3L<<4) +#define BNX2_TDMA_DMAD_STATUS_RHOLD_BD_ENTRY (0x3L<<8) +#define BNX2_TDMA_DMAD_STATUS_IFTQ_ENUM (0xfL<<12) + +#define BNX2_TDMA_DR_INTF_FSM 0x00005c88 +#define BNX2_TDMA_DR_INTF_FSM_L2_COMP (0x3L<<0) +#define BNX2_TDMA_DR_INTF_FSM_TPATQ (0x7L<<4) +#define BNX2_TDMA_DR_INTF_FSM_TPBUF (0x3L<<8) +#define BNX2_TDMA_DR_INTF_FSM_DR_BUF (0x7L<<12) +#define BNX2_TDMA_DR_INTF_FSM_DMAD (0x7L<<16) + +#define BNX2_TDMA_DR_INTF_STATUS 0x00005c8c +#define BNX2_TDMA_DR_INTF_STATUS_HOLE_PHASE (0x7L<<0) +#define BNX2_TDMA_DR_INTF_STATUS_DATA_AVAIL (0x3L<<4) +#define BNX2_TDMA_DR_INTF_STATUS_SHIFT_ADDR (0x7L<<8) +#define BNX2_TDMA_DR_INTF_STATUS_NXT_PNTR (0xfL<<12) +#define BNX2_TDMA_DR_INTF_STATUS_BYTE_COUNT (0x7L<<16) + +#define BNX2_TDMA_FTQ_DATA 0x00005fc0 +#define BNX2_TDMA_FTQ_CMD 0x00005ff8 +#define BNX2_TDMA_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_TDMA_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_TDMA_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_TDMA_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_TDMA_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_TDMA_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_TDMA_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_TDMA_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_TDMA_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_TDMA_FTQ_CMD_POP (1L<<30) +#define BNX2_TDMA_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_TDMA_FTQ_CTL 0x00005ffc +#define BNX2_TDMA_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_TDMA_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_TDMA_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_TDMA_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_TDMA_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + + + +/* + * hc_reg definition + * offset: 0x6800 + */ +#define BNX2_HC_COMMAND 0x00006800 +#define BNX2_HC_COMMAND_ENABLE (1L<<0) +#define BNX2_HC_COMMAND_SKIP_ABORT (1L<<4) +#define BNX2_HC_COMMAND_COAL_NOW (1L<<16) +#define BNX2_HC_COMMAND_COAL_NOW_WO_INT (1L<<17) +#define BNX2_HC_COMMAND_STATS_NOW (1L<<18) +#define BNX2_HC_COMMAND_FORCE_INT (0x3L<<19) +#define BNX2_HC_COMMAND_FORCE_INT_NULL (0L<<19) +#define BNX2_HC_COMMAND_FORCE_INT_HIGH (1L<<19) +#define BNX2_HC_COMMAND_FORCE_INT_LOW (2L<<19) +#define BNX2_HC_COMMAND_FORCE_INT_FREE (3L<<19) +#define BNX2_HC_COMMAND_CLR_STAT_NOW (1L<<21) + +#define BNX2_HC_STATUS 0x00006804 +#define BNX2_HC_STATUS_MASTER_ABORT (1L<<0) +#define BNX2_HC_STATUS_PARITY_ERROR_STATE (1L<<1) +#define BNX2_HC_STATUS_PCI_CLK_CNT_STAT (1L<<16) +#define BNX2_HC_STATUS_CORE_CLK_CNT_STAT (1L<<17) +#define BNX2_HC_STATUS_NUM_STATUS_BLOCKS_STAT (1L<<18) +#define BNX2_HC_STATUS_NUM_INT_GEN_STAT (1L<<19) +#define BNX2_HC_STATUS_NUM_INT_MBOX_WR_STAT (1L<<20) +#define BNX2_HC_STATUS_CORE_CLKS_TO_HW_INTACK_STAT (1L<<23) +#define BNX2_HC_STATUS_CORE_CLKS_TO_SW_INTACK_STAT (1L<<24) +#define BNX2_HC_STATUS_CORE_CLKS_DURING_SW_INTACK_STAT (1L<<25) + +#define BNX2_HC_CONFIG 0x00006808 +#define BNX2_HC_CONFIG_COLLECT_STATS (1L<<0) +#define BNX2_HC_CONFIG_RX_TMR_MODE (1L<<1) +#define BNX2_HC_CONFIG_TX_TMR_MODE (1L<<2) +#define BNX2_HC_CONFIG_COM_TMR_MODE (1L<<3) +#define BNX2_HC_CONFIG_CMD_TMR_MODE (1L<<4) +#define BNX2_HC_CONFIG_STATISTIC_PRIORITY (1L<<5) +#define BNX2_HC_CONFIG_STATUS_PRIORITY (1L<<6) +#define BNX2_HC_CONFIG_STAT_MEM_ADDR (0xffL<<8) + +#define BNX2_HC_ATTN_BITS_ENABLE 0x0000680c +#define BNX2_HC_STATUS_ADDR_L 0x00006810 +#define BNX2_HC_STATUS_ADDR_H 0x00006814 +#define BNX2_HC_STATISTICS_ADDR_L 0x00006818 +#define BNX2_HC_STATISTICS_ADDR_H 0x0000681c +#define BNX2_HC_TX_QUICK_CONS_TRIP 0x00006820 +#define BNX2_HC_TX_QUICK_CONS_TRIP_VALUE (0xffL<<0) +#define BNX2_HC_TX_QUICK_CONS_TRIP_INT (0xffL<<16) + +#define BNX2_HC_COMP_PROD_TRIP 0x00006824 +#define BNX2_HC_COMP_PROD_TRIP_VALUE (0xffL<<0) +#define BNX2_HC_COMP_PROD_TRIP_INT (0xffL<<16) + +#define BNX2_HC_RX_QUICK_CONS_TRIP 0x00006828 +#define BNX2_HC_RX_QUICK_CONS_TRIP_VALUE (0xffL<<0) +#define BNX2_HC_RX_QUICK_CONS_TRIP_INT (0xffL<<16) + +#define BNX2_HC_RX_TICKS 0x0000682c +#define BNX2_HC_RX_TICKS_VALUE (0x3ffL<<0) +#define BNX2_HC_RX_TICKS_INT (0x3ffL<<16) + +#define BNX2_HC_TX_TICKS 0x00006830 +#define BNX2_HC_TX_TICKS_VALUE (0x3ffL<<0) +#define BNX2_HC_TX_TICKS_INT (0x3ffL<<16) + +#define BNX2_HC_COM_TICKS 0x00006834 +#define BNX2_HC_COM_TICKS_VALUE (0x3ffL<<0) +#define BNX2_HC_COM_TICKS_INT (0x3ffL<<16) + +#define BNX2_HC_CMD_TICKS 0x00006838 +#define BNX2_HC_CMD_TICKS_VALUE (0x3ffL<<0) +#define BNX2_HC_CMD_TICKS_INT (0x3ffL<<16) + +#define BNX2_HC_PERIODIC_TICKS 0x0000683c +#define BNX2_HC_PERIODIC_TICKS_HC_PERIODIC_TICKS (0xffffL<<0) + +#define BNX2_HC_STAT_COLLECT_TICKS 0x00006840 +#define BNX2_HC_STAT_COLLECT_TICKS_HC_STAT_COLL_TICKS (0xffL<<4) + +#define BNX2_HC_STATS_TICKS 0x00006844 +#define BNX2_HC_STATS_TICKS_HC_STAT_TICKS (0xffffL<<8) + +#define BNX2_HC_STAT_MEM_DATA 0x0000684c +#define BNX2_HC_STAT_GEN_SEL_0 0x00006850 +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0 (0x7fL<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT0 (0L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT1 (1L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT2 (2L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT3 (3L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT4 (4L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT5 (5L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT6 (6L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT7 (7L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT8 (8L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT9 (9L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT10 (10L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT11 (11L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT0 (12L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT1 (13L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT2 (14L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT3 (15L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT4 (16L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT5 (17L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT6 (18L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT7 (19L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT0 (20L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT1 (21L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT2 (22L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT3 (23L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT4 (24L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT5 (25L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT6 (26L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT7 (27L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT8 (28L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT9 (29L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT10 (30L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT11 (31L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT0 (32L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT1 (33L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT2 (34L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT3 (35L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT0 (36L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT1 (37L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT2 (38L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT3 (39L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT4 (40L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT5 (41L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT6 (42L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT7 (43L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT0 (44L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT1 (45L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT2 (46L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT3 (47L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT4 (48L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT5 (49L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT6 (50L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT7 (51L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_PCI_CLK_CNT (52L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CORE_CLK_CNT (53L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_STATUS_BLOCKS (54L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_GEN (55L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_MBOX_WR (56L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_HW_INTACK (59L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_SW_INTACK (60L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_DURING_SW_INTACK (61L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TSCH_CMD_CNT (62L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TSCH_SLOT_CNT (63L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CSCH_CMD_CNT (64L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CSCH_SLOT_CNT (65L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RLUPQ_VALID_CNT (66L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXPQ_VALID_CNT (67L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXPCQ_VALID_CNT (68L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PPQ_VALID_CNT (69L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PMQ_VALID_CNT (70L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PTQ_VALID_CNT (71L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RDMAQ_VALID_CNT (72L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TSCHQ_VALID_CNT (73L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TBDRQ_VALID_CNT (74L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXPQ_VALID_CNT (75L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TDMAQ_VALID_CNT (76L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPATQ_VALID_CNT (77L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TASQ_VALID_CNT (78L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CSQ_VALID_CNT (79L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CPQ_VALID_CNT (80L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMXQ_VALID_CNT (81L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMTQ_VALID_CNT (82L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMQ_VALID_CNT (83L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MGMQ_VALID_CNT (84L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_READ_TRANSFERS_CNT (85L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_READ_DELAY_PCI_CLKS_CNT (86L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_READ_TRANSFERS_CNT (87L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_READ_DELAY_PCI_CLKS_CNT (88L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_READ_RETRY_AFTER_DATA_CNT (89L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_WRITE_TRANSFERS_CNT (90L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_WRITE_DELAY_PCI_CLKS_CNT (91L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_WRITE_TRANSFERS_CNT (92L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_WRITE_DELAY_PCI_CLKS_CNT (93L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_WRITE_RETRY_AFTER_DATA_CNT (94L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_WR_CNT64 (95L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_RD_CNT64 (96L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_ACC_STALL_CLKS (97L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_LOCK_STALL_CLKS (98L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MBQ_CTX_ACCESS_STAT (99L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MBQ_CTX_ACCESS64_STAT (100L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MBQ_PCI_STALL_STAT (101L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TBDR_FTQ_ENTRY_CNT (102L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TBDR_BURST_CNT (103L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TDMA_FTQ_ENTRY_CNT (104L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TDMA_BURST_CNT (105L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RDMA_FTQ_ENTRY_CNT (106L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RDMA_BURST_CNT (107L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RLUP_MATCH_CNT (108L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_POLL_PASS_CNT (109L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR1_CNT (110L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR2_CNT (111L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR3_CNT (112L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR4_CNT (113L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR5_CNT (114L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT0 (115L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT1 (116L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT2 (117L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT3 (118L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT4 (119L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT5 (120L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RBDC_PROC1_MISS (121L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RBDC_PROC2_MISS (122L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RBDC_BURST_CNT (127L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_1 (0x7fL<<8) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_2 (0x7fL<<16) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_3 (0x7fL<<24) + +#define BNX2_HC_STAT_GEN_SEL_1 0x00006854 +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_4 (0x7fL<<0) +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_5 (0x7fL<<8) +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_6 (0x7fL<<16) +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_7 (0x7fL<<24) + +#define BNX2_HC_STAT_GEN_SEL_2 0x00006858 +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_8 (0x7fL<<0) +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_9 (0x7fL<<8) +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_10 (0x7fL<<16) +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_11 (0x7fL<<24) + +#define BNX2_HC_STAT_GEN_SEL_3 0x0000685c +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_12 (0x7fL<<0) +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_13 (0x7fL<<8) +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_14 (0x7fL<<16) +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_15 (0x7fL<<24) + +#define BNX2_HC_STAT_GEN_STAT0 0x00006888 +#define BNX2_HC_STAT_GEN_STAT1 0x0000688c +#define BNX2_HC_STAT_GEN_STAT2 0x00006890 +#define BNX2_HC_STAT_GEN_STAT3 0x00006894 +#define BNX2_HC_STAT_GEN_STAT4 0x00006898 +#define BNX2_HC_STAT_GEN_STAT5 0x0000689c +#define BNX2_HC_STAT_GEN_STAT6 0x000068a0 +#define BNX2_HC_STAT_GEN_STAT7 0x000068a4 +#define BNX2_HC_STAT_GEN_STAT8 0x000068a8 +#define BNX2_HC_STAT_GEN_STAT9 0x000068ac +#define BNX2_HC_STAT_GEN_STAT10 0x000068b0 +#define BNX2_HC_STAT_GEN_STAT11 0x000068b4 +#define BNX2_HC_STAT_GEN_STAT12 0x000068b8 +#define BNX2_HC_STAT_GEN_STAT13 0x000068bc +#define BNX2_HC_STAT_GEN_STAT14 0x000068c0 +#define BNX2_HC_STAT_GEN_STAT15 0x000068c4 +#define BNX2_HC_STAT_GEN_STAT_AC0 0x000068c8 +#define BNX2_HC_STAT_GEN_STAT_AC1 0x000068cc +#define BNX2_HC_STAT_GEN_STAT_AC2 0x000068d0 +#define BNX2_HC_STAT_GEN_STAT_AC3 0x000068d4 +#define BNX2_HC_STAT_GEN_STAT_AC4 0x000068d8 +#define BNX2_HC_STAT_GEN_STAT_AC5 0x000068dc +#define BNX2_HC_STAT_GEN_STAT_AC6 0x000068e0 +#define BNX2_HC_STAT_GEN_STAT_AC7 0x000068e4 +#define BNX2_HC_STAT_GEN_STAT_AC8 0x000068e8 +#define BNX2_HC_STAT_GEN_STAT_AC9 0x000068ec +#define BNX2_HC_STAT_GEN_STAT_AC10 0x000068f0 +#define BNX2_HC_STAT_GEN_STAT_AC11 0x000068f4 +#define BNX2_HC_STAT_GEN_STAT_AC12 0x000068f8 +#define BNX2_HC_STAT_GEN_STAT_AC13 0x000068fc +#define BNX2_HC_STAT_GEN_STAT_AC14 0x00006900 +#define BNX2_HC_STAT_GEN_STAT_AC15 0x00006904 +#define BNX2_HC_VIS 0x00006908 +#define BNX2_HC_VIS_STAT_BUILD_STATE (0xfL<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_IDLE (0L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_START (1L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_REQUEST (2L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_UPDATE64 (3L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_UPDATE32 (4L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_UPDATE_DONE (5L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_DMA (6L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_CONTROL (7L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_LOW (8L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_HIGH (9L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_DATA (10L<<0) +#define BNX2_HC_VIS_DMA_STAT_STATE (0xfL<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_IDLE (0L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_STATUS_PARAM (1L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_STATUS_DMA (2L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_WRITE_COMP (3L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_COMP (4L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_STATISTIC_PARAM (5L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_STATISTIC_DMA (6L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_WRITE_COMP_1 (7L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_WRITE_COMP_2 (8L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_WAIT (9L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_ABORT (15L<<8) +#define BNX2_HC_VIS_DMA_MSI_STATE (0x7L<<12) +#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE (0x3L<<15) +#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE_IDLE (0L<<15) +#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE_COUNT (1L<<15) +#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE_START (2L<<15) + +#define BNX2_HC_VIS_1 0x0000690c +#define BNX2_HC_VIS_1_HW_INTACK_STATE (1L<<4) +#define BNX2_HC_VIS_1_HW_INTACK_STATE_IDLE (0L<<4) +#define BNX2_HC_VIS_1_HW_INTACK_STATE_COUNT (1L<<4) +#define BNX2_HC_VIS_1_SW_INTACK_STATE (1L<<5) +#define BNX2_HC_VIS_1_SW_INTACK_STATE_IDLE (0L<<5) +#define BNX2_HC_VIS_1_SW_INTACK_STATE_COUNT (1L<<5) +#define BNX2_HC_VIS_1_DURING_SW_INTACK_STATE (1L<<6) +#define BNX2_HC_VIS_1_DURING_SW_INTACK_STATE_IDLE (0L<<6) +#define BNX2_HC_VIS_1_DURING_SW_INTACK_STATE_COUNT (1L<<6) +#define BNX2_HC_VIS_1_MAILBOX_COUNT_STATE (1L<<7) +#define BNX2_HC_VIS_1_MAILBOX_COUNT_STATE_IDLE (0L<<7) +#define BNX2_HC_VIS_1_MAILBOX_COUNT_STATE_COUNT (1L<<7) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE (0xfL<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_IDLE (0L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_DMA (1L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_UPDATE (2L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_ASSIGN (3L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_WAIT (4L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_REG_UPDATE (5L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_REG_ASSIGN (6L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_REG_WAIT (7L<<17) +#define BNX2_HC_VIS_1_RAM_WR_ARB_STATE (0x3L<<21) +#define BNX2_HC_VIS_1_RAM_WR_ARB_STATE_NORMAL (0L<<21) +#define BNX2_HC_VIS_1_RAM_WR_ARB_STATE_CLEAR (1L<<21) +#define BNX2_HC_VIS_1_INT_GEN_STATE (1L<<23) +#define BNX2_HC_VIS_1_INT_GEN_STATE_DLE (0L<<23) +#define BNX2_HC_VIS_1_INT_GEN_STATE_NTERRUPT (1L<<23) +#define BNX2_HC_VIS_1_STAT_CHAN_ID (0x7L<<24) +#define BNX2_HC_VIS_1_INT_B (1L<<27) + +#define BNX2_HC_DEBUG_VECT_PEEK 0x00006910 +#define BNX2_HC_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_HC_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_HC_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_HC_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_HC_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_HC_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + + + +/* + * txp_reg definition + * offset: 0x40000 + */ +#define BNX2_TXP_CPU_MODE 0x00045000 +#define BNX2_TXP_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_TXP_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_TXP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_TXP_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_TXP_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_TXP_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_TXP_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_TXP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_TXP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_TXP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_TXP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_TXP_CPU_STATE 0x00045004 +#define BNX2_TXP_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_TXP_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_TXP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_TXP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_TXP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_TXP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_TXP_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_TXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_TXP_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_TXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_TXP_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_TXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_TXP_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_TXP_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_TXP_CPU_EVENT_MASK 0x00045008 +#define BNX2_TXP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_TXP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_TXP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_TXP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_TXP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_TXP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_TXP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_TXP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_TXP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_TXP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_TXP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_TXP_CPU_PROGRAM_COUNTER 0x0004501c +#define BNX2_TXP_CPU_INSTRUCTION 0x00045020 +#define BNX2_TXP_CPU_DATA_ACCESS 0x00045024 +#define BNX2_TXP_CPU_INTERRUPT_ENABLE 0x00045028 +#define BNX2_TXP_CPU_INTERRUPT_VECTOR 0x0004502c +#define BNX2_TXP_CPU_INTERRUPT_SAVED_PC 0x00045030 +#define BNX2_TXP_CPU_HW_BREAKPOINT 0x00045034 +#define BNX2_TXP_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_TXP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK 0x00045038 +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_TXP_CPU_LAST_BRANCH_ADDR 0x00045048 +#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_TXP_CPU_REG_FILE 0x00045200 +#define BNX2_TXP_FTQ_DATA 0x000453c0 +#define BNX2_TXP_FTQ_CMD 0x000453f8 +#define BNX2_TXP_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_TXP_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_TXP_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_TXP_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_TXP_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_TXP_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_TXP_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_TXP_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_TXP_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_TXP_FTQ_CMD_POP (1L<<30) +#define BNX2_TXP_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_TXP_FTQ_CTL 0x000453fc +#define BNX2_TXP_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_TXP_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_TXP_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_TXP_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_TXP_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_TXP_SCRATCH 0x00060000 + + +/* + * tpat_reg definition + * offset: 0x80000 + */ +#define BNX2_TPAT_CPU_MODE 0x00085000 +#define BNX2_TPAT_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_TPAT_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_TPAT_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_TPAT_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_TPAT_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_TPAT_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_TPAT_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_TPAT_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_TPAT_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_TPAT_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_TPAT_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_TPAT_CPU_STATE 0x00085004 +#define BNX2_TPAT_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_TPAT_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_TPAT_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_TPAT_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_TPAT_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_TPAT_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_TPAT_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_TPAT_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_TPAT_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_TPAT_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_TPAT_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_TPAT_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_TPAT_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_TPAT_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_TPAT_CPU_EVENT_MASK 0x00085008 +#define BNX2_TPAT_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_TPAT_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_TPAT_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_TPAT_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_TPAT_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_TPAT_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_TPAT_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_TPAT_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_TPAT_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_TPAT_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_TPAT_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_TPAT_CPU_PROGRAM_COUNTER 0x0008501c +#define BNX2_TPAT_CPU_INSTRUCTION 0x00085020 +#define BNX2_TPAT_CPU_DATA_ACCESS 0x00085024 +#define BNX2_TPAT_CPU_INTERRUPT_ENABLE 0x00085028 +#define BNX2_TPAT_CPU_INTERRUPT_VECTOR 0x0008502c +#define BNX2_TPAT_CPU_INTERRUPT_SAVED_PC 0x00085030 +#define BNX2_TPAT_CPU_HW_BREAKPOINT 0x00085034 +#define BNX2_TPAT_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_TPAT_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK 0x00085038 +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR 0x00085048 +#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_TPAT_CPU_REG_FILE 0x00085200 +#define BNX2_TPAT_FTQ_DATA 0x000853c0 +#define BNX2_TPAT_FTQ_CMD 0x000853f8 +#define BNX2_TPAT_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_TPAT_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_TPAT_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_TPAT_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_TPAT_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_TPAT_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_TPAT_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_TPAT_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_TPAT_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_TPAT_FTQ_CMD_POP (1L<<30) +#define BNX2_TPAT_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_TPAT_FTQ_CTL 0x000853fc +#define BNX2_TPAT_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_TPAT_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_TPAT_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_TPAT_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_TPAT_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_TPAT_SCRATCH 0x000a0000 + + +/* + * rxp_reg definition + * offset: 0xc0000 + */ +#define BNX2_RXP_CPU_MODE 0x000c5000 +#define BNX2_RXP_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_RXP_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_RXP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_RXP_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_RXP_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_RXP_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_RXP_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_RXP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_RXP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_RXP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_RXP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_RXP_CPU_STATE 0x000c5004 +#define BNX2_RXP_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_RXP_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_RXP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_RXP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_RXP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_RXP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_RXP_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_RXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_RXP_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_RXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_RXP_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_RXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_RXP_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_RXP_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_RXP_CPU_EVENT_MASK 0x000c5008 +#define BNX2_RXP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_RXP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_RXP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_RXP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_RXP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_RXP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_RXP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_RXP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_RXP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_RXP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_RXP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_RXP_CPU_PROGRAM_COUNTER 0x000c501c +#define BNX2_RXP_CPU_INSTRUCTION 0x000c5020 +#define BNX2_RXP_CPU_DATA_ACCESS 0x000c5024 +#define BNX2_RXP_CPU_INTERRUPT_ENABLE 0x000c5028 +#define BNX2_RXP_CPU_INTERRUPT_VECTOR 0x000c502c +#define BNX2_RXP_CPU_INTERRUPT_SAVED_PC 0x000c5030 +#define BNX2_RXP_CPU_HW_BREAKPOINT 0x000c5034 +#define BNX2_RXP_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_RXP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK 0x000c5038 +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_RXP_CPU_LAST_BRANCH_ADDR 0x000c5048 +#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_RXP_CPU_REG_FILE 0x000c5200 +#define BNX2_RXP_CFTQ_DATA 0x000c5380 +#define BNX2_RXP_CFTQ_CMD 0x000c53b8 +#define BNX2_RXP_CFTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_RXP_CFTQ_CMD_WR_TOP (1L<<10) +#define BNX2_RXP_CFTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_RXP_CFTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_RXP_CFTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_RXP_CFTQ_CMD_RD_DATA (1L<<26) +#define BNX2_RXP_CFTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_RXP_CFTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_RXP_CFTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_RXP_CFTQ_CMD_POP (1L<<30) +#define BNX2_RXP_CFTQ_CMD_BUSY (1L<<31) + +#define BNX2_RXP_CFTQ_CTL 0x000c53bc +#define BNX2_RXP_CFTQ_CTL_INTERVENE (1L<<0) +#define BNX2_RXP_CFTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_RXP_CFTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_RXP_CFTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_RXP_CFTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_RXP_FTQ_DATA 0x000c53c0 +#define BNX2_RXP_FTQ_CMD 0x000c53f8 +#define BNX2_RXP_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_RXP_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_RXP_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_RXP_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_RXP_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_RXP_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_RXP_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_RXP_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_RXP_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_RXP_FTQ_CMD_POP (1L<<30) +#define BNX2_RXP_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_RXP_FTQ_CTL 0x000c53fc +#define BNX2_RXP_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_RXP_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_RXP_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_RXP_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_RXP_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_RXP_SCRATCH 0x000e0000 + + +/* + * com_reg definition + * offset: 0x100000 + */ +#define BNX2_COM_CPU_MODE 0x00105000 +#define BNX2_COM_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_COM_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_COM_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_COM_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_COM_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_COM_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_COM_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_COM_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_COM_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_COM_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_COM_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_COM_CPU_STATE 0x00105004 +#define BNX2_COM_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_COM_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_COM_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_COM_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_COM_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_COM_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_COM_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_COM_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_COM_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_COM_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_COM_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_COM_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_COM_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_COM_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_COM_CPU_EVENT_MASK 0x00105008 +#define BNX2_COM_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_COM_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_COM_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_COM_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_COM_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_COM_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_COM_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_COM_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_COM_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_COM_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_COM_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_COM_CPU_PROGRAM_COUNTER 0x0010501c +#define BNX2_COM_CPU_INSTRUCTION 0x00105020 +#define BNX2_COM_CPU_DATA_ACCESS 0x00105024 +#define BNX2_COM_CPU_INTERRUPT_ENABLE 0x00105028 +#define BNX2_COM_CPU_INTERRUPT_VECTOR 0x0010502c +#define BNX2_COM_CPU_INTERRUPT_SAVED_PC 0x00105030 +#define BNX2_COM_CPU_HW_BREAKPOINT 0x00105034 +#define BNX2_COM_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_COM_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_COM_CPU_DEBUG_VECT_PEEK 0x00105038 +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_COM_CPU_LAST_BRANCH_ADDR 0x00105048 +#define BNX2_COM_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_COM_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_COM_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_COM_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_COM_CPU_REG_FILE 0x00105200 +#define BNX2_COM_COMXQ_FTQ_DATA 0x00105340 +#define BNX2_COM_COMXQ_FTQ_CMD 0x00105378 +#define BNX2_COM_COMXQ_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_COM_COMXQ_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_COM_COMXQ_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_COM_COMXQ_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_COM_COMXQ_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_COM_COMXQ_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_COM_COMXQ_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_COM_COMXQ_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_COM_COMXQ_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_COM_COMXQ_FTQ_CMD_POP (1L<<30) +#define BNX2_COM_COMXQ_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_COM_COMXQ_FTQ_CTL 0x0010537c +#define BNX2_COM_COMXQ_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_COM_COMXQ_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_COM_COMXQ_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_COM_COMXQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_COM_COMXQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_COM_COMTQ_FTQ_DATA 0x00105380 +#define BNX2_COM_COMTQ_FTQ_CMD 0x001053b8 +#define BNX2_COM_COMTQ_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_COM_COMTQ_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_COM_COMTQ_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_COM_COMTQ_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_COM_COMTQ_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_COM_COMTQ_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_COM_COMTQ_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_COM_COMTQ_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_COM_COMTQ_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_COM_COMTQ_FTQ_CMD_POP (1L<<30) +#define BNX2_COM_COMTQ_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_COM_COMTQ_FTQ_CTL 0x001053bc +#define BNX2_COM_COMTQ_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_COM_COMTQ_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_COM_COMTQ_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_COM_COMTQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_COM_COMTQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_COM_COMQ_FTQ_DATA 0x001053c0 +#define BNX2_COM_COMQ_FTQ_CMD 0x001053f8 +#define BNX2_COM_COMQ_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_COM_COMQ_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_COM_COMQ_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_COM_COMQ_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_COM_COMQ_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_COM_COMQ_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_COM_COMQ_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_COM_COMQ_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_COM_COMQ_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_COM_COMQ_FTQ_CMD_POP (1L<<30) +#define BNX2_COM_COMQ_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_COM_COMQ_FTQ_CTL 0x001053fc +#define BNX2_COM_COMQ_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_COM_COMQ_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_COM_COMQ_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_COM_COMQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_COM_COMQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_COM_SCRATCH 0x00120000 + + +/* + * cp_reg definition + * offset: 0x180000 + */ +#define BNX2_CP_CPU_MODE 0x00185000 +#define BNX2_CP_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_CP_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_CP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_CP_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_CP_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_CP_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_CP_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_CP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_CP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_CP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_CP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_CP_CPU_STATE 0x00185004 +#define BNX2_CP_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_CP_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_CP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_CP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_CP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_CP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_CP_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_CP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_CP_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_CP_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_CP_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_CP_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_CP_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_CP_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_CP_CPU_EVENT_MASK 0x00185008 +#define BNX2_CP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_CP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_CP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_CP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_CP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_CP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_CP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_CP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_CP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_CP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_CP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_CP_CPU_PROGRAM_COUNTER 0x0018501c +#define BNX2_CP_CPU_INSTRUCTION 0x00185020 +#define BNX2_CP_CPU_DATA_ACCESS 0x00185024 +#define BNX2_CP_CPU_INTERRUPT_ENABLE 0x00185028 +#define BNX2_CP_CPU_INTERRUPT_VECTOR 0x0018502c +#define BNX2_CP_CPU_INTERRUPT_SAVED_PC 0x00185030 +#define BNX2_CP_CPU_HW_BREAKPOINT 0x00185034 +#define BNX2_CP_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_CP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_CP_CPU_DEBUG_VECT_PEEK 0x00185038 +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_CP_CPU_LAST_BRANCH_ADDR 0x00185048 +#define BNX2_CP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_CP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_CP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_CP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_CP_CPU_REG_FILE 0x00185200 +#define BNX2_CP_CPQ_FTQ_DATA 0x001853c0 +#define BNX2_CP_CPQ_FTQ_CMD 0x001853f8 +#define BNX2_CP_CPQ_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_CP_CPQ_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_CP_CPQ_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_CP_CPQ_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_CP_CPQ_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_CP_CPQ_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_CP_CPQ_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_CP_CPQ_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_CP_CPQ_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_CP_CPQ_FTQ_CMD_POP (1L<<30) +#define BNX2_CP_CPQ_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_CP_CPQ_FTQ_CTL 0x001853fc +#define BNX2_CP_CPQ_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_CP_CPQ_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_CP_CPQ_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_CP_CPQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_CP_CPQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_CP_SCRATCH 0x001a0000 + + +/* + * mcp_reg definition + * offset: 0x140000 + */ +#define BNX2_MCP_CPU_MODE 0x00145000 +#define BNX2_MCP_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_MCP_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_MCP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_MCP_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_MCP_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_MCP_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_MCP_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_MCP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_MCP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_MCP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_MCP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_MCP_CPU_STATE 0x00145004 +#define BNX2_MCP_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_MCP_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_MCP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_MCP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_MCP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_MCP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_MCP_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_MCP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_MCP_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_MCP_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_MCP_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_MCP_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_MCP_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_MCP_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_MCP_CPU_EVENT_MASK 0x00145008 +#define BNX2_MCP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_MCP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_MCP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_MCP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_MCP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_MCP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_MCP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_MCP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_MCP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_MCP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_MCP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_MCP_CPU_PROGRAM_COUNTER 0x0014501c +#define BNX2_MCP_CPU_INSTRUCTION 0x00145020 +#define BNX2_MCP_CPU_DATA_ACCESS 0x00145024 +#define BNX2_MCP_CPU_INTERRUPT_ENABLE 0x00145028 +#define BNX2_MCP_CPU_INTERRUPT_VECTOR 0x0014502c +#define BNX2_MCP_CPU_INTERRUPT_SAVED_PC 0x00145030 +#define BNX2_MCP_CPU_HW_BREAKPOINT 0x00145034 +#define BNX2_MCP_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_MCP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK 0x00145038 +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_MCP_CPU_LAST_BRANCH_ADDR 0x00145048 +#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_MCP_CPU_REG_FILE 0x00145200 +#define BNX2_MCP_MCPQ_FTQ_DATA 0x001453c0 +#define BNX2_MCP_MCPQ_FTQ_CMD 0x001453f8 +#define BNX2_MCP_MCPQ_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_MCP_MCPQ_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_MCP_MCPQ_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_MCP_MCPQ_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_MCP_MCPQ_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_MCP_MCPQ_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_MCP_MCPQ_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_MCP_MCPQ_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_MCP_MCPQ_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_MCP_MCPQ_FTQ_CMD_POP (1L<<30) +#define BNX2_MCP_MCPQ_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_MCP_MCPQ_FTQ_CTL 0x001453fc +#define BNX2_MCP_MCPQ_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_MCP_MCPQ_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_MCP_MCPQ_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_MCP_MCPQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_MCP_MCPQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_MCP_ROM 0x00150000 +#define BNX2_MCP_SCRATCH 0x00160000 + + +#define NUM_MC_HASH_REGISTERS 8 + + +/* PHY_ID1: bits 31-16; PHY_ID2: bits 15-0. */ +#define PHY_BCM5706_PHY_ID 0x00206160 + +#define PHY_ID(id) ((id) & 0xfffffff0) +#define PHY_REV_ID(id) ((id) & 0xf) + +#define MIN_ETHERNET_PACKET_SIZE 60 +#define MAX_ETHERNET_PACKET_SIZE 1514 +#define MAX_ETHERNET_JUMBO_PACKET_SIZE 9014 + +#define RX_COPY_THRESH 92 + +#define DMA_READ_CHANS 5 +#define DMA_WRITE_CHANS 3 + +#define BCM_PAGE_BITS 12 +#define BCM_PAGE_SIZE (1 << BCM_PAGE_BITS) + +#define TX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct tx_bd)) +#define MAX_TX_DESC_CNT (TX_DESC_CNT - 1) + +#define RX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct rx_bd)) +#define MAX_RX_DESC_CNT (RX_DESC_CNT - 1) + +#define NEXT_TX_BD(x) (((x) & (MAX_TX_DESC_CNT - 1)) == \ + (MAX_TX_DESC_CNT - 1)) ? \ + (x) + 2 : (x) + 1 + +#define TX_RING_IDX(x) ((x) & MAX_TX_DESC_CNT) + +#define NEXT_RX_BD(x) (((x) & (MAX_RX_DESC_CNT - 1)) == \ + (MAX_RX_DESC_CNT - 1)) ? \ + (x) + 2 : (x) + 1 + +#define RX_RING_IDX(x) ((x) & MAX_RX_DESC_CNT) + + +/* Context size. */ +#define CTX_SHIFT 7 +#define CTX_SIZE (1 << CTX_SHIFT) +#define CTX_MASK (CTX_SIZE - 1) +#define GET_CID_ADDR(_cid) ((_cid) << CTX_SHIFT) +#define GET_CID(_cid_addr) ((_cid_addr) >> CTX_SHIFT) + +#define PHY_CTX_SHIFT 6 +#define PHY_CTX_SIZE (1 << PHY_CTX_SHIFT) +#define PHY_CTX_MASK (PHY_CTX_SIZE - 1) +#define GET_PCID_ADDR(_pcid) ((_pcid) << PHY_CTX_SHIFT) +#define GET_PCID(_pcid_addr) ((_pcid_addr) >> PHY_CTX_SHIFT) + +#define MB_KERNEL_CTX_SHIFT 8 +#define MB_KERNEL_CTX_SIZE (1 << MB_KERNEL_CTX_SHIFT) +#define MB_KERNEL_CTX_MASK (MB_KERNEL_CTX_SIZE - 1) +#define MB_GET_CID_ADDR(_cid) (0x10000 + ((_cid) << MB_KERNEL_CTX_SHIFT)) + +#define MAX_CID_CNT 0x4000 +#define MAX_CID_ADDR (GET_CID_ADDR(MAX_CID_CNT)) +#define INVALID_CID_ADDR 0xffffffff + +#define TX_CID 16 +#define RX_CID 0 + +#define MB_TX_CID_ADDR MB_GET_CID_ADDR(TX_CID) +#define MB_RX_CID_ADDR MB_GET_CID_ADDR(RX_CID) + +struct sw_bd { + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(mapping) +}; + +/* Buffered flash (Atmel: AT45DB011B) specific information */ +#define SEEPROM_PAGE_BITS 2 +#define SEEPROM_PHY_PAGE_SIZE (1 << SEEPROM_PAGE_BITS) +#define SEEPROM_BYTE_ADDR_MASK (SEEPROM_PHY_PAGE_SIZE-1) +#define SEEPROM_PAGE_SIZE 4 +#define SEEPROM_TOTAL_SIZE 65536 + +#define BUFFERED_FLASH_PAGE_BITS 9 +#define BUFFERED_FLASH_PHY_PAGE_SIZE (1 << BUFFERED_FLASH_PAGE_BITS) +#define BUFFERED_FLASH_BYTE_ADDR_MASK (BUFFERED_FLASH_PHY_PAGE_SIZE-1) +#define BUFFERED_FLASH_PAGE_SIZE 264 +#define BUFFERED_FLASH_TOTAL_SIZE 131072 + +#define SAIFUN_FLASH_PAGE_BITS 8 +#define SAIFUN_FLASH_PHY_PAGE_SIZE (1 << SAIFUN_FLASH_PAGE_BITS) +#define SAIFUN_FLASH_BYTE_ADDR_MASK (SAIFUN_FLASH_PHY_PAGE_SIZE-1) +#define SAIFUN_FLASH_PAGE_SIZE 256 +#define SAIFUN_FLASH_BASE_TOTAL_SIZE 65536 + +#define NVRAM_TIMEOUT_COUNT 30000 + + +#define FLASH_STRAP_MASK (BNX2_NVM_CFG1_FLASH_MODE | \ + BNX2_NVM_CFG1_BUFFER_MODE | \ + BNX2_NVM_CFG1_PROTECT_MODE | \ + BNX2_NVM_CFG1_FLASH_SIZE) + +struct flash_spec { + u32 strapping; + u32 config1; + u32 config2; + u32 config3; + u32 write1; + u32 buffered; + u32 page_bits; + u32 page_size; + u32 addr_mask; + u32 total_size; + u8 *name; +}; + +struct bnx2 { + /* Fields used in the tx and intr/napi performance paths are grouped */ + /* together in the beginning of the structure. */ + void __iomem *regview; + + struct net_device *dev; + struct pci_dev *pdev; + + atomic_t intr_sem; + + struct status_block *status_blk; + u32 last_status_idx; + + atomic_t tx_avail_bd; + struct tx_bd *tx_desc_ring; + struct sw_bd *tx_buf_ring; + u32 tx_prod_bseq; + u16 tx_prod; + u16 tx_cons; + +#ifdef BCM_VLAN + struct vlan_group *vlgrp; +#endif + + u32 rx_offset; + u32 rx_buf_use_size; /* useable size */ + u32 rx_buf_size; /* with alignment */ + struct rx_bd *rx_desc_ring; + struct sw_bd *rx_buf_ring; + u32 rx_prod_bseq; + u16 rx_prod; + u16 rx_cons; + + u32 rx_csum; + + /* Only used to synchronize netif_stop_queue/wake_queue when tx */ + /* ring is full */ + spinlock_t tx_lock; + + /* End of fileds used in the performance code paths. */ + + char *name; + + int timer_interval; + struct timer_list timer; + struct work_struct reset_task; + + /* Used to synchronize phy accesses. */ + spinlock_t phy_lock; + + u32 flags; +#define PCIX_FLAG 1 +#define PCI_32BIT_FLAG 2 +#define ONE_TDMA_FLAG 4 /* no longer used */ +#define NO_WOL_FLAG 8 +#define USING_DAC_FLAG 0x10 +#define USING_MSI_FLAG 0x20 + + u32 phy_flags; +#define PHY_SERDES_FLAG 1 +#define PHY_CRC_FIX_FLAG 2 +#define PHY_PARALLEL_DETECT_FLAG 4 +#define PHY_INT_MODE_MASK_FLAG 0x300 +#define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100 +#define PHY_INT_MODE_LINK_READY_FLAG 0x200 + + u32 chip_id; + /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */ +#define CHIP_NUM(bp) (((bp)->chip_id) & 0xffff0000) +#define CHIP_NUM_5706 0x57060000 + +#define CHIP_REV(bp) (((bp)->chip_id) & 0x0000f000) +#define CHIP_REV_Ax 0x00000000 +#define CHIP_REV_Bx 0x00001000 +#define CHIP_REV_Cx 0x00002000 + +#define CHIP_METAL(bp) (((bp)->chip_id) & 0x00000ff0) +#define CHIP_BONDING(bp) (((bp)->chip_id) & 0x0000000f) + +#define CHIP_ID(bp) (((bp)->chip_id) & 0xfffffff0) +#define CHIP_ID_5706_A0 0x57060000 +#define CHIP_ID_5706_A1 0x57060010 + +#define CHIP_BOND_ID(bp) (((bp)->chip_id) & 0xf) + +/* A serdes chip will have the first bit of the bond id set. */ +#define CHIP_BOND_ID_SERDES_BIT 0x01 + + u32 phy_addr; + u32 phy_id; + + u16 bus_speed_mhz; + u8 wol; + + u8 fw_timed_out; + + u16 fw_wr_seq; + u16 fw_drv_pulse_wr_seq; + + int tx_ring_size; + dma_addr_t tx_desc_mapping; + + + int rx_ring_size; + dma_addr_t rx_desc_mapping; + + u16 tx_quick_cons_trip; + u16 tx_quick_cons_trip_int; + u16 rx_quick_cons_trip; + u16 rx_quick_cons_trip_int; + u16 comp_prod_trip; + u16 comp_prod_trip_int; + u16 tx_ticks; + u16 tx_ticks_int; + u16 com_ticks; + u16 com_ticks_int; + u16 cmd_ticks; + u16 cmd_ticks_int; + u16 rx_ticks; + u16 rx_ticks_int; + + u32 stats_ticks; + + dma_addr_t status_blk_mapping; + + struct statistics_block *stats_blk; + dma_addr_t stats_blk_mapping; + + u32 rx_mode; + + u16 req_line_speed; + u8 req_duplex; + + u8 link_up; + + u16 line_speed; + u8 duplex; + u8 flow_ctrl; /* actual flow ctrl settings */ + /* may be different from */ + /* req_flow_ctrl if autoneg */ +#define FLOW_CTRL_TX 1 +#define FLOW_CTRL_RX 2 + + u32 advertising; + + u8 req_flow_ctrl; /* flow ctrl advertisement */ + /* settings or forced */ + /* settings */ + u8 autoneg; +#define AUTONEG_SPEED 1 +#define AUTONEG_FLOW_CTRL 2 + + u8 loopback; +#define MAC_LOOPBACK 1 +#define PHY_LOOPBACK 2 + + u8 serdes_an_pending; +#define SERDES_AN_TIMEOUT (2 * HZ) + + u8 mac_addr[8]; + + u32 fw_ver; + + int pm_cap; + int pcix_cap; + + struct net_device_stats net_stats; + + struct flash_spec *flash_info; +}; + +static u32 bnx2_reg_rd_ind(struct bnx2 *bp, u32 offset); +static void bnx2_reg_wr_ind(struct bnx2 *bp, u32 offset, u32 val); + +#define REG_RD(bp, offset) \ + readl(bp->regview + offset) + +#define REG_WR(bp, offset, val) \ + writel(val, bp->regview + offset) + +#define REG_WR16(bp, offset, val) \ + writew(val, bp->regview + offset) + +#define REG_RD_IND(bp, offset) \ + bnx2_reg_rd_ind(bp, offset) + +#define REG_WR_IND(bp, offset, val) \ + bnx2_reg_wr_ind(bp, offset, val) + +/* Indirect context access. Unlike the MBQ_WR, these macros will not + * trigger a chip event. */ +static void bnx2_ctx_wr(struct bnx2 *bp, u32 cid_addr, u32 offset, u32 val); + +#define CTX_WR(bp, cid_addr, offset, val) \ + bnx2_ctx_wr(bp, cid_addr, offset, val) + +struct cpu_reg { + u32 mode; + u32 mode_value_halt; + u32 mode_value_sstep; + + u32 state; + u32 state_value_clear; + + u32 gpr0; + u32 evmask; + u32 pc; + u32 inst; + u32 bp; + + u32 spad_base; + + u32 mips_view_base; +}; + +struct fw_info { + u32 ver_major; + u32 ver_minor; + u32 ver_fix; + + u32 start_addr; + + /* Text section. */ + u32 text_addr; + u32 text_len; + u32 text_index; + u32 *text; + + /* Data section. */ + u32 data_addr; + u32 data_len; + u32 data_index; + u32 *data; + + /* SBSS section. */ + u32 sbss_addr; + u32 sbss_len; + u32 sbss_index; + u32 *sbss; + + /* BSS section. */ + u32 bss_addr; + u32 bss_len; + u32 bss_index; + u32 *bss; + + /* Read-only section. */ + u32 rodata_addr; + u32 rodata_len; + u32 rodata_index; + u32 *rodata; +}; + +#define RV2P_PROC1 0 +#define RV2P_PROC2 1 + + +/* This value (in milliseconds) determines the frequency of the driver + * issuing the PULSE message code. The firmware monitors this periodic + * pulse to determine when to switch to an OS-absent mode. */ +#define DRV_PULSE_PERIOD_MS 250 + +/* This value (in milliseconds) determines how long the driver should + * wait for an acknowledgement from the firmware before timing out. Once + * the firmware has timed out, the driver will assume there is no firmware + * running and there won't be any firmware-driver synchronization during a + * driver reset. */ +#define FW_ACK_TIME_OUT_MS 50 + + +#define BNX2_DRV_RESET_SIGNATURE 0x00000000 +#define BNX2_DRV_RESET_SIGNATURE_MAGIC 0x4841564b /* HAVK */ +//#define DRV_RESET_SIGNATURE_MAGIC 0x47495352 /* RSIG */ + +#define BNX2_DRV_MB 0x00000004 +#define BNX2_DRV_MSG_CODE 0xff000000 +#define BNX2_DRV_MSG_CODE_RESET 0x01000000 +#define BNX2_DRV_MSG_CODE_UNLOAD 0x02000000 +#define BNX2_DRV_MSG_CODE_SHUTDOWN 0x03000000 +#define BNX2_DRV_MSG_CODE_SUSPEND_WOL 0x04000000 +#define BNX2_DRV_MSG_CODE_FW_TIMEOUT 0x05000000 +#define BNX2_DRV_MSG_CODE_PULSE 0x06000000 +#define BNX2_DRV_MSG_CODE_DIAG 0x07000000 +#define BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL 0x09000000 + +#define BNX2_DRV_MSG_DATA 0x00ff0000 +#define BNX2_DRV_MSG_DATA_WAIT0 0x00010000 +#define BNX2_DRV_MSG_DATA_WAIT1 0x00020000 +#define BNX2_DRV_MSG_DATA_WAIT2 0x00030000 +#define BNX2_DRV_MSG_DATA_WAIT3 0x00040000 + +#define BNX2_DRV_MSG_SEQ 0x0000ffff + +#define BNX2_FW_MB 0x00000008 +#define BNX2_FW_MSG_ACK 0x0000ffff +#define BNX2_FW_MSG_STATUS_MASK 0x00ff0000 +#define BNX2_FW_MSG_STATUS_OK 0x00000000 +#define BNX2_FW_MSG_STATUS_FAILURE 0x00ff0000 + +#define BNX2_LINK_STATUS 0x0000000c + +#define BNX2_DRV_PULSE_MB 0x00000010 +#define BNX2_DRV_PULSE_SEQ_MASK 0x0000ffff + +/* Indicate to the firmware not to go into the + * OS absent when it is not getting driver pulse. + * This is used for debugging. */ +#define BNX2_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE 0x00010000 + +#define BNX2_DEV_INFO_SIGNATURE 0x00000020 +#define BNX2_DEV_INFO_SIGNATURE_MAGIC 0x44564900 +#define BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK 0xffffff00 +#define BNX2_DEV_INFO_FEATURE_CFG_VALID 0x01 +#define BNX2_DEV_INFO_SECONDARY_PORT 0x80 +#define BNX2_DEV_INFO_DRV_ALWAYS_ALIVE 0x40 + +#define BNX2_SHARED_HW_CFG_PART_NUM 0x00000024 + +#define BNX2_SHARED_HW_CFG_POWER_DISSIPATED 0x00000034 +#define BNX2_SHARED_HW_CFG_POWER_STATE_D3_MASK 0xff000000 +#define BNX2_SHARED_HW_CFG_POWER_STATE_D2_MASK 0xff0000 +#define BNX2_SHARED_HW_CFG_POWER_STATE_D1_MASK 0xff00 +#define BNX2_SHARED_HW_CFG_POWER_STATE_D0_MASK 0xff + +#define BNX2_SHARED_HW_CFG POWER_CONSUMED 0x00000038 +#define BNX2_SHARED_HW_CFG_CONFIG 0x0000003c +#define BNX2_SHARED_HW_CFG_DESIGN_NIC 0 +#define BNX2_SHARED_HW_CFG_DESIGN_LOM 0x1 +#define BNX2_SHARED_HW_CFG_PHY_COPPER 0 +#define BNX2_SHARED_HW_CFG_PHY_FIBER 0x2 +#define BNX2_SHARED_HW_CFG_LED_MODE_SHIFT_BITS 8 +#define BNX2_SHARED_HW_CFG_LED_MODE_MASK 0x300 +#define BNX2_SHARED_HW_CFG_LED_MODE_MAC 0 +#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY1 0x100 +#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY2 0x200 + +#define BNX2_DEV_INFO_BC_REV 0x0000004c + +#define BNX2_PORT_HW_CFG_MAC_UPPER 0x00000050 +#define BNX2_PORT_HW_CFG_UPPERMAC_MASK 0xffff + +#define BNX2_PORT_HW_CFG_MAC_LOWER 0x00000054 +#define BNX2_PORT_HW_CFG_CONFIG 0x00000058 + +#define BNX2_PORT_HW_CFG_IMD_MAC_A_UPPER 0x00000068 +#define BNX2_PORT_HW_CFG_IMD_MAC_A_LOWER 0x0000006c +#define BNX2_PORT_HW_CFG_IMD_MAC_B_UPPER 0x00000070 +#define BNX2_PORT_HW_CFG_IMD_MAC_B_LOWER 0x00000074 +#define BNX2_PORT_HW_CFG_ISCSI_MAC_UPPER 0x00000078 +#define BNX2_PORT_HW_CFG_ISCSI_MAC_LOWER 0x0000007c + +#define BNX2_DEV_INFO_PER_PORT_HW_CONFIG2 0x000000b4 + +#define BNX2_DEV_INFO_FORMAT_REV 0x000000c4 +#define BNX2_DEV_INFO_FORMAT_REV_MASK 0xff000000 +#define BNX2_DEV_INFO_FORMAT_REV_ID ('A' << 24) + +#define BNX2_SHARED_FEATURE 0x000000c8 +#define BNX2_SHARED_FEATURE_MASK 0xffffffff + +#define BNX2_PORT_FEATURE 0x000000d8 +#define BNX2_PORT2_FEATURE 0x00000014c +#define BNX2_PORT_FEATURE_WOL_ENABLED 0x01000000 +#define BNX2_PORT_FEATURE_MBA_ENABLED 0x02000000 +#define BNX2_PORT_FEATURE_ASF_ENABLED 0x04000000 +#define BNX2_PORT_FEATURE_IMD_ENABLED 0x08000000 +#define BNX2_PORT_FEATURE_BAR1_SIZE_MASK 0xf +#define BNX2_PORT_FEATURE_BAR1_SIZE_DISABLED 0x0 +#define BNX2_PORT_FEATURE_BAR1_SIZE_64K 0x1 +#define BNX2_PORT_FEATURE_BAR1_SIZE_128K 0x2 +#define BNX2_PORT_FEATURE_BAR1_SIZE_256K 0x3 +#define BNX2_PORT_FEATURE_BAR1_SIZE_512K 0x4 +#define BNX2_PORT_FEATURE_BAR1_SIZE_1M 0x5 +#define BNX2_PORT_FEATURE_BAR1_SIZE_2M 0x6 +#define BNX2_PORT_FEATURE_BAR1_SIZE_4M 0x7 +#define BNX2_PORT_FEATURE_BAR1_SIZE_8M 0x8 +#define BNX2_PORT_FEATURE_BAR1_SIZE_16M 0x9 +#define BNX2_PORT_FEATURE_BAR1_SIZE_32M 0xa +#define BNX2_PORT_FEATURE_BAR1_SIZE_64M 0xb +#define BNX2_PORT_FEATURE_BAR1_SIZE_128M 0xc +#define BNX2_PORT_FEATURE_BAR1_SIZE_256M 0xd +#define BNX2_PORT_FEATURE_BAR1_SIZE_512M 0xe +#define BNX2_PORT_FEATURE_BAR1_SIZE_1G 0xf + +#define BNX2_PORT_FEATURE_WOL 0xdc +#define BNX2_PORT2_FEATURE_WOL 0x150 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_SHIFT_BITS 4 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_MASK 0x30 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_DISABLE 0 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_MAGIC 0x10 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_ACPI 0x20 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_MAGIC_AND_ACPI 0x30 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_MASK 0xf +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_AUTONEG 0 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_10HALF 1 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_10FULL 2 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_100HALF 3 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_100FULL 4 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_1000HALF 5 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_1000FULL 6 +#define BNX2_PORT_FEATURE_WOL_AUTONEG_ADVERTISE_1000 0x40 +#define BNX2_PORT_FEATURE_WOL_RESERVED_PAUSE_CAP 0x400 +#define BNX2_PORT_FEATURE_WOL_RESERVED_ASYM_PAUSE_CAP 0x800 + +#define BNX2_PORT_FEATURE_MBA 0xe0 +#define BNX2_PORT2_FEATURE_MBA 0x154 +#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_SHIFT_BITS 0 +#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK 0x3 +#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_PXE 0 +#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_RPL 1 +#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_BOOTP 2 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_SHIFT_BITS 2 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_MASK 0x3c +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_AUTONEG 0 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_10HALF 0x4 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_10FULL 0x8 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_100HALF 0xc +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_100FULL 0x10 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_1000HALF 0x14 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_1000FULL 0x18 +#define BNX2_PORT_FEATURE_MBA_SETUP_PROMPT_ENABLE 0x40 +#define BNX2_PORT_FEATURE_MBA_HOTKEY_CTRL_S 0 +#define BNX2_PORT_FEATURE_MBA_HOTKEY_CTRL_B 0x80 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_SHIFT_BITS 8 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_MASK 0xff00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_DISABLED 0 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_1K 0x100 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_2K 0x200 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_4K 0x300 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_8K 0x400 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_16K 0x500 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_32K 0x600 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_64K 0x700 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_128K 0x800 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_256K 0x900 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_512K 0xa00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_1M 0xb00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_2M 0xc00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_4M 0xd00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_8M 0xe00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_16M 0xf00 +#define BNX2_PORT_FEATURE_MBA_MSG_TIMEOUT_SHIFT_BITS 16 +#define BNX2_PORT_FEATURE_MBA_MSG_TIMEOUT_MASK 0xf0000 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_SHIFT_BITS 20 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_MASK 0x300000 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_AUTO 0 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_BBS 0x100000 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_INT18H 0x200000 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_INT19H 0x300000 + +#define BNX2_PORT_FEATURE_IMD 0xe4 +#define BNX2_PORT2_FEATURE_IMD 0x158 +#define BNX2_PORT_FEATURE_IMD_LINK_OVERRIDE_DEFAULT 0 +#define BNX2_PORT_FEATURE_IMD_LINK_OVERRIDE_ENABLE 1 + +#define BNX2_PORT_FEATURE_VLAN 0xe8 +#define BNX2_PORT2_FEATURE_VLAN 0x15c +#define BNX2_PORT_FEATURE_MBA_VLAN_TAG_MASK 0xffff +#define BNX2_PORT_FEATURE_MBA_VLAN_ENABLE 0x10000 + +#define BNX2_BC_STATE_RESET_TYPE 0x000001c0 +#define BNX2_BC_STATE_RESET_TYPE_SIG 0x00005254 +#define BNX2_BC_STATE_RESET_TYPE_SIG_MASK 0x0000ffff +#define BNX2_BC_STATE_RESET_TYPE_NONE (BNX2_BC_STATE_RESET_TYPE_SIG | \ + 0x00010000) +#define BNX2_BC_STATE_RESET_TYPE_PCI (BNX2_BC_STATE_RESET_TYPE_SIG | \ + 0x00020000) +#define BNX2_BC_STATE_RESET_TYPE_VAUX (BNX2_BC_STATE_RESET_TYPE_SIG | \ + 0x00030000) +#define BNX2_BC_STATE_RESET_TYPE_DRV_MASK DRV_MSG_CODE +#define BNX2_BC_STATE_RESET_TYPE_DRV_RESET (BNX2_BC_STATE_RESET_TYPE_SIG | \ + DRV_MSG_CODE_RESET) +#define BNX2_BC_STATE_RESET_TYPE_DRV_UNLOAD (BNX2_BC_STATE_RESET_TYPE_SIG | \ + DRV_MSG_CODE_UNLOAD) +#define BNX2_BC_STATE_RESET_TYPE_DRV_SHUTDOWN (BNX2_BC_STATE_RESET_TYPE_SIG | \ + DRV_MSG_CODE_SHUTDOWN) +#define BNX2_BC_STATE_RESET_TYPE_DRV_WOL (BNX2_BC_STATE_RESET_TYPE_SIG | \ + DRV_MSG_CODE_WOL) +#define BNX2_BC_STATE_RESET_TYPE_DRV_DIAG (BNX2_BC_STATE_RESET_TYPE_SIG | \ + DRV_MSG_CODE_DIAG) +#define BNX2_BC_STATE_RESET_TYPE_VALUE(msg) (BNX2_BC_STATE_RESET_TYPE_SIG | \ + (msg)) + +#define BNX2_BC_STATE 0x000001c4 +#define BNX2_BC_STATE_ERR_MASK 0x0000ff00 +#define BNX2_BC_STATE_SIGN 0x42530000 +#define BNX2_BC_STATE_SIGN_MASK 0xffff0000 +#define BNX2_BC_STATE_BC1_START (BNX2_BC_STATE_SIGN | 0x1) +#define BNX2_BC_STATE_GET_NVM_CFG1 (BNX2_BC_STATE_SIGN | 0x2) +#define BNX2_BC_STATE_PROG_BAR (BNX2_BC_STATE_SIGN | 0x3) +#define BNX2_BC_STATE_INIT_VID (BNX2_BC_STATE_SIGN | 0x4) +#define BNX2_BC_STATE_GET_NVM_CFG2 (BNX2_BC_STATE_SIGN | 0x5) +#define BNX2_BC_STATE_APPLY_WKARND (BNX2_BC_STATE_SIGN | 0x6) +#define BNX2_BC_STATE_LOAD_BC2 (BNX2_BC_STATE_SIGN | 0x7) +#define BNX2_BC_STATE_GOING_BC2 (BNX2_BC_STATE_SIGN | 0x8) +#define BNX2_BC_STATE_GOING_DIAG (BNX2_BC_STATE_SIGN | 0x9) +#define BNX2_BC_STATE_RT_FINAL_INIT (BNX2_BC_STATE_SIGN | 0x81) +#define BNX2_BC_STATE_RT_WKARND (BNX2_BC_STATE_SIGN | 0x82) +#define BNX2_BC_STATE_RT_DRV_PULSE (BNX2_BC_STATE_SIGN | 0x83) +#define BNX2_BC_STATE_RT_FIOEVTS (BNX2_BC_STATE_SIGN | 0x84) +#define BNX2_BC_STATE_RT_DRV_CMD (BNX2_BC_STATE_SIGN | 0x85) +#define BNX2_BC_STATE_RT_LOW_POWER (BNX2_BC_STATE_SIGN | 0x86) +#define BNX2_BC_STATE_RT_SET_WOL (BNX2_BC_STATE_SIGN | 0x87) +#define BNX2_BC_STATE_RT_OTHER_FW (BNX2_BC_STATE_SIGN | 0x88) +#define BNX2_BC_STATE_RT_GOING_D3 (BNX2_BC_STATE_SIGN | 0x89) +#define BNX2_BC_STATE_ERR_BAD_VERSION (BNX2_BC_STATE_SIGN | 0x0100) +#define BNX2_BC_STATE_ERR_BAD_BC2_CRC (BNX2_BC_STATE_SIGN | 0x0200) +#define BNX2_BC_STATE_ERR_BC1_LOOP (BNX2_BC_STATE_SIGN | 0x0300) +#define BNX2_BC_STATE_ERR_UNKNOWN_CMD (BNX2_BC_STATE_SIGN | 0x0400) +#define BNX2_BC_STATE_ERR_DRV_DEAD (BNX2_BC_STATE_SIGN | 0x0500) +#define BNX2_BC_STATE_ERR_NO_RXP (BNX2_BC_STATE_SIGN | 0x0600) +#define BNX2_BC_STATE_ERR_TOO_MANY_RBUF (BNX2_BC_STATE_SIGN | 0x0700) + +#define BNX2_BC_STATE_DEBUG_CMD 0x1dc +#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE 0x42440000 +#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE_MASK 0xffff0000 +#define BNX2_BC_STATE_BC_DBG_CMD_LOOP_CNT_MASK 0xffff +#define BNX2_BC_STATE_BC_DBG_CMD_LOOP_INFINITE 0xffff + +#define HOST_VIEW_SHMEM_BASE 0x167c00 + +#endif diff --git a/drivers/net/bnx2_fw.h b/drivers/net/bnx2_fw.h new file mode 100644 index 00000000000..35f3a2ae5ef --- /dev/null +++ b/drivers/net/bnx2_fw.h @@ -0,0 +1,2468 @@ +/* bnx2_fw.h: Broadcom NX2 network driver. + * + * Copyright (c) 2004, 2005 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, except as noted below. + * + * This file contains firmware data derived from proprietary unpublished + * source code, Copyright (c) 2004, 2005 Broadcom Corporation. + * + * Permission is hereby granted for the distribution of this firmware data + * in hexadecimal or equivalent format, provided this copyright notice is + * accompanying it. + */ + + +static int bnx2_COM_b06FwReleaseMajor = 0x0; +static int bnx2_COM_b06FwReleaseMinor = 0x0; +static int bnx2_COM_b06FwReleaseFix = 0x0; +static u32 bnx2_COM_b06FwStartAddr = 0x080004a0; +static u32 bnx2_COM_b06FwTextAddr = 0x08000000; +static int bnx2_COM_b06FwTextLen = 0x4594; +static u32 bnx2_COM_b06FwDataAddr = 0x080045e0; +static int bnx2_COM_b06FwDataLen = 0x0; +static u32 bnx2_COM_b06FwRodataAddr = 0x08004598; +static int bnx2_COM_b06FwRodataLen = 0x18; +static u32 bnx2_COM_b06FwBssAddr = 0x08004600; +static int bnx2_COM_b06FwBssLen = 0x88; +static u32 bnx2_COM_b06FwSbssAddr = 0x080045e0; +static int bnx2_COM_b06FwSbssLen = 0x1c; +static u32 bnx2_COM_b06FwText[(0x4594/4) + 1] = { + 0x0a000128, 0x00000000, 0x00000000, 0x0000000d, 0x636f6d20, 0x302e362e, + 0x39000000, 0x00060902, 0x00000000, 0x00000003, 0x00000014, 0x00000032, + 0x00000003, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000010, 0x000003e8, 0x0000ea60, 0x00000001, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x0000ffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000002, 0x00000020, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x10000003, 0x00000000, 0x0000000d, + 0x0000000d, 0x3c020800, 0x244245e0, 0x3c030800, 0x24634688, 0xac400000, + 0x0043202b, 0x1480fffd, 0x24420004, 0x3c1d0800, 0x37bd7ffc, 0x03a0f021, + 0x3c100800, 0x261004a0, 0x3c1c0800, 0x279c45e0, 0x0e0001f2, 0x00000000, + 0x0000000d, 0x27bdffe8, 0x3c1a8000, 0x3c020008, 0x0342d825, 0x3c036010, + 0xafbf0010, 0x8c655000, 0x3c020800, 0x24470ac8, 0x3c040800, 0x24864600, + 0x2402ff7f, 0x00a22824, 0x34a5380c, 0xac655000, 0x00002821, 0x24020037, + 0x24030c80, 0xaf420008, 0xaf430024, 0xacc70000, 0x24a50001, 0x2ca20016, + 0x1440fffc, 0x24c60004, 0x24844600, 0x3c020800, 0x24420ad4, 0x3c030800, + 0x246309d4, 0xac820004, 0x3c020800, 0x24420618, 0x3c050800, 0x24a50ca0, + 0xac82000c, 0x3c020800, 0x24423100, 0xac830008, 0x3c030800, 0x246325c8, + 0xac820014, 0x3c020800, 0x24422b0c, 0xac830018, 0xac83001c, 0x3c030800, + 0x24630adc, 0xac820024, 0x3c020800, 0x24423040, 0xac83002c, 0x3c030800, + 0x24633060, 0xac820030, 0x3c020800, 0x24422f6c, 0xac830034, 0x3c030800, + 0x24632c60, 0xac82003c, 0x3c020800, 0x24420b6c, 0xac850010, 0xac850020, + 0xac830040, 0x0e000bd6, 0xac820050, 0x8fbf0010, 0x03e00008, 0x27bd0018, + 0x27bdffe0, 0xafb00010, 0x27500100, 0xafbf0018, 0xafb10014, 0x9203000b, + 0x24020003, 0x1462005b, 0x96110008, 0x32220001, 0x10400009, 0x27430080, + 0x8e020000, 0x96040014, 0x000211c2, 0x00021040, 0x00621821, 0xa4640000, + 0x0a0001cb, 0x3c020800, 0x3c020800, 0x8c430020, 0x1060002a, 0x3c030800, + 0x0e001006, 0x00000000, 0x97420108, 0x8f850018, 0x9743010c, 0x3042003e, + 0x00021400, 0x00621825, 0xaca30000, 0x8f840018, 0x8f420100, 0xac820004, + 0x97430116, 0x9742010e, 0x8f840018, 0x00031c00, 0x00431025, 0xac820008, + 0x97430110, 0x97440112, 0x8f850018, 0x00031c00, 0x00832025, 0xaca4000c, + 0x97420114, 0x8f840018, 0x3042ffff, 0xac820010, 0x8f830018, 0xac600014, + 0x8f820018, 0x3c030800, 0xac400018, 0x9462466e, 0x8f840018, 0x3c032000, + 0x00431025, 0xac82001c, 0x0e001044, 0x24040001, 0x3c030800, 0x8c620040, + 0x24420001, 0xac620040, 0x3c020800, 0x8c430044, 0x32240004, 0x24630001, + 0x10800017, 0xac430044, 0x8f4202b8, 0x04430007, 0x8e020020, 0x3c040800, + 0x8c830060, 0x24020001, 0x24630001, 0x0a0001ed, 0xac830060, 0x3c060800, + 0x8cc4005c, 0xaf420280, 0x96030016, 0x00001021, 0xa7430284, 0x8e050004, + 0x24840001, 0x3c031000, 0xaf450288, 0xaf4302b8, 0x0a0001ed, 0xacc4005c, + 0x32220002, 0x0a0001ed, 0x0002102b, 0x3c026000, 0xac400808, 0x0000000d, + 0x00001021, 0x8fbf0018, 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, + 0x27bdffc8, 0xafbf0034, 0xafbe0030, 0xafb7002c, 0xafb60028, 0xafb50024, + 0xafb40020, 0xafb3001c, 0xafb20018, 0xafb10014, 0x0e00013f, 0xafb00010, + 0x24110020, 0x24150030, 0x2794000c, 0x27930008, 0x3c124000, 0x3c1e0800, + 0x3c170800, 0x3c160800, 0x8f820004, 0x3c040800, 0x8c830020, 0x10430004, + 0x00000000, 0xaf830004, 0x0e00110b, 0x00000000, 0x8f500000, 0x32020007, + 0x1040fff5, 0x32020001, 0x1040002b, 0x32020002, 0x8f420100, 0xaf420020, + 0x8f430104, 0xaf4300a8, 0x9342010b, 0x93630000, 0x306300ff, 0x10710005, + 0x304400ff, 0x10750006, 0x2c820016, 0x0a000227, 0x00000000, 0xaf940000, + 0x0a000228, 0x2c820016, 0xaf930000, 0x0a000228, 0x00000000, 0xaf800000, + 0x14400005, 0x00041880, 0x0e0002b2, 0x00000000, 0x0a000234, 0x00000000, + 0x3c020800, 0x24424600, 0x00621821, 0x8c620000, 0x0040f809, 0x00000000, + 0x10400005, 0x8fc20034, 0x8f420104, 0x3c016020, 0xac220014, 0x8fc20034, + 0xaf520138, 0x24420001, 0xafc20034, 0x32020002, 0x10400019, 0x32020004, + 0x8f420140, 0xaf420020, 0x93630000, 0x306300ff, 0x10710005, 0x00000000, + 0x10750006, 0x00000000, 0x0a000250, 0x00000000, 0xaf940000, 0x0a000251, + 0x00000000, 0xaf930000, 0x0a000251, 0x00000000, 0xaf800000, 0x0e0008b9, + 0x00000000, 0x8ee20038, 0xaf520178, 0x24420001, 0xaee20038, 0x32020004, + 0x1040ffad, 0x00000000, 0x8f420180, 0xaf420020, 0x93630000, 0x306300ff, + 0x10710005, 0x00000000, 0x10750006, 0x00000000, 0x0a00026a, 0x00000000, + 0xaf940000, 0x0a00026b, 0x00000000, 0xaf930000, 0x0a00026b, 0x00000000, + 0xaf800000, 0x93620000, 0x14510004, 0x8ec2003c, 0x0e000835, 0x00000000, + 0x8ec2003c, 0xaf5201b8, 0x24420001, 0x0a000206, 0xaec2003c, 0x27bdffe8, + 0xafbf0010, 0x97420108, 0x24033000, 0x30447000, 0x10830012, 0x28823001, + 0x10400007, 0x24024000, 0x1080000b, 0x24022000, 0x1082001a, 0x24020001, + 0x0a000299, 0x00000000, 0x1082000c, 0x24025000, 0x1082000e, 0x00000000, + 0x0a000299, 0x00000000, 0x0000000d, 0x0a00029b, 0x00001021, 0x0e000300, + 0x00000000, 0x0a00029b, 0x00001021, 0x0e00048f, 0x00000000, 0x0a00029b, + 0x00001021, 0x0e000fdf, 0x00000000, 0x0a00029b, 0x00001021, 0x0000000d, + 0x00001021, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x93620000, 0x24030020, + 0x304400ff, 0x10830005, 0x24020030, 0x10820007, 0x00000000, 0x0a0002af, + 0x00000000, 0x2782000c, 0xaf820000, 0x03e00008, 0x00000000, 0x27820008, + 0xaf820000, 0x03e00008, 0x00000000, 0xaf800000, 0x03e00008, 0x00000000, + 0x0000000d, 0x03e00008, 0x00001021, 0x03e00008, 0x00001021, 0x27440100, + 0x94830008, 0x30620004, 0x10400017, 0x30620002, 0x8f4202b8, 0x04430007, + 0x8c820020, 0x3c040800, 0x8c830060, 0x24020001, 0x24630001, 0x03e00008, + 0xac830060, 0xaf420280, 0x94830016, 0x3c060800, 0xa7430284, 0x8c850004, + 0x8cc4005c, 0x00001021, 0x3c031000, 0x24840001, 0xaf450288, 0xaf4302b8, + 0x03e00008, 0xacc4005c, 0x14400003, 0x3c040800, 0x03e00008, 0x00001021, + 0x8c830084, 0x24020001, 0x24630001, 0x03e00008, 0xac830084, 0x27450100, + 0x3c040800, 0x8c820088, 0x94a3000c, 0x24420001, 0x007a1821, 0xac820088, + 0x8ca40018, 0x90664000, 0xaf440038, 0x8ca2001c, 0x2403fff8, 0x00063600, + 0x00431024, 0x34420004, 0x3c030005, 0xaf42003c, 0xaf430030, 0x00000000, + 0x00000000, 0x00000000, 0xaf460404, 0x00000000, 0x00000000, 0x00000000, + 0x3c020006, 0x34420001, 0xaf420030, 0x00000000, 0x00000000, 0x00000000, + 0x8f420000, 0x30420010, 0x1040fffd, 0x00001021, 0x03e00008, 0x00000000, + 0x3c020800, 0x8c430020, 0x27bdffe8, 0xafb00010, 0x27500100, 0x1060001e, + 0xafbf0014, 0x0e001006, 0x00000000, 0x8f830018, 0x8e020018, 0xac620000, + 0x8f840018, 0x9602000c, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, + 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018, 0xac400014, 0x8f840018, + 0x3c026000, 0x8c434448, 0xac830018, 0x96020008, 0x3c030800, 0x9464466e, + 0x8f850018, 0x00021400, 0x00441025, 0x24040001, 0x0e001044, 0xaca2001c, + 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x27bdffc8, 0xafb3001c, + 0x00009821, 0xafb7002c, 0x0000b821, 0xafbe0030, 0x0000f021, 0xafb50024, + 0x27550100, 0xafbf0034, 0xafb60028, 0xafb40020, 0xafb20018, 0xafb10014, + 0xafb00010, 0x96a20008, 0x8f540100, 0x8eb20018, 0x30420001, 0x10400037, + 0x02a0b021, 0x8f630054, 0x2642ffff, 0x00431023, 0x18400006, 0x00000000, + 0x0000000d, 0x00000000, 0x24000128, 0x0a000372, 0x00002021, 0x8f62004c, + 0x02421023, 0x18400028, 0x00002021, 0x93650120, 0x93640121, 0x3c030800, + 0x8c62008c, 0x308400ff, 0x24420001, 0x30a500ff, 0x00803821, 0x1485000b, + 0xac62008c, 0x3c040800, 0x8c830090, 0x24630001, 0xac830090, 0x93620122, + 0x30420001, 0x00021023, 0x30420005, 0x0a000372, 0x34440004, 0x27660100, + 0x00041080, 0x00c21021, 0x8c430000, 0x02431823, 0x04600004, 0x24820001, + 0x30440007, 0x1485fff9, 0x00041080, 0x10870007, 0x3c030800, 0xa3640121, + 0x8c620094, 0x24040005, 0x24420001, 0x0a000372, 0xac620094, 0x24040004, + 0x00809821, 0x9362003f, 0x304400ff, 0x38830016, 0x2c630001, 0x38820010, + 0x2c420001, 0x00621825, 0x1460000c, 0x24020001, 0x38830008, 0x2c630001, + 0x38820014, 0x2c420001, 0x00621825, 0x14600005, 0x24020001, 0x24020012, + 0x14820002, 0x00001021, 0x24020001, 0x50400007, 0x8eb10020, 0x8ea20020, + 0x8f630040, 0x00408821, 0x00431023, 0x5c400001, 0x8f710040, 0x9343010b, + 0x24020004, 0x54620005, 0x36730080, 0x96a20008, 0x36730002, 0x24170001, + 0x305e0020, 0x2402fffb, 0x02628024, 0x1200002a, 0x3c030800, 0x8c620030, + 0x02021024, 0x10400026, 0x3c020800, 0x8c430020, 0x10600024, 0x32620004, + 0x0e001006, 0x00000000, 0x8f830018, 0x8f420100, 0xac620000, 0x8f840018, + 0x02201821, 0x32620002, 0xac900004, 0x8f840018, 0x50400001, 0x8ec30014, + 0xac830008, 0x8f830018, 0x8ec20020, 0xac62000c, 0x8f840018, 0x8f620040, + 0xac820010, 0x8f830018, 0x8ec20018, 0xac620014, 0x8f840018, 0x3c026000, + 0x8c434448, 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c024010, + 0x00621825, 0xac83001c, 0x0e001044, 0x24040001, 0x32620004, 0x10400076, + 0x00003821, 0x3c029000, 0x34420001, 0x3c038000, 0x02821025, 0xa360007c, + 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620023, + 0x30420080, 0x10400011, 0x00000000, 0x8f65005c, 0x8f63004c, 0x9764003c, + 0x8f620064, 0x00a32823, 0x00852821, 0x00a2102b, 0x54400006, 0x3c023fff, + 0x93620023, 0x3042007f, 0xa3620023, 0xaf720064, 0x3c023fff, 0x0a0003f1, + 0x3442ffff, 0x8f62005c, 0x02421023, 0x04400011, 0x00000000, 0x8f65005c, + 0x8f630064, 0x9764003c, 0x3c023fff, 0x3442ffff, 0xaf720064, 0x00a32823, + 0x00852821, 0x0045102b, 0x10400004, 0x02451021, 0x3c053fff, 0x34a5ffff, + 0x02451021, 0xaf62005c, 0x24070001, 0xaf72004c, 0x8f620054, 0x16420005, + 0x00000000, 0x93620023, 0x30420040, 0x10400017, 0x24020001, 0x9762006a, + 0x00022880, 0x50a00001, 0x24050001, 0x97630068, 0x93640081, 0x3c020800, + 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021, + 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021, 0x8f420074, + 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000, 0x34420001, + 0x02821025, 0xa3600081, 0xaf420020, 0x9363007e, 0x9362007a, 0x10620004, + 0x00000000, 0x0e000f2a, 0x00000000, 0x00403821, 0x10e00017, 0x3c029000, + 0x34420001, 0x02821025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, + 0x1440fffd, 0x3c028000, 0x9363007d, 0x34420001, 0x3c048000, 0x02821025, + 0xa363007d, 0xaf420020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, + 0x3c031000, 0xaf5401c0, 0xa34201c4, 0xaf4301f8, 0x8ea30014, 0x8f620040, + 0x14430003, 0x00431023, 0x0a000443, 0x00001021, 0x28420001, 0x10400034, + 0x00000000, 0x8f620040, 0xaf630040, 0x9362003e, 0x30420001, 0x1440000b, + 0x3c029000, 0x93620022, 0x24420001, 0xa3620022, 0x93630022, 0x3c020800, + 0x8c440098, 0x0064182b, 0x1460001e, 0x3c020800, 0x3c029000, 0x34420001, + 0x02821025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, + 0x00000000, 0x3c038000, 0x9362007d, 0x34630001, 0x3c048000, 0x02831825, + 0x34420001, 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd, + 0x24020002, 0x3c031000, 0xaf5401c0, 0xa34201c4, 0x24020001, 0xaf4301f8, + 0xa7620012, 0x0a000476, 0xa3600022, 0x9743007a, 0x9444002a, 0x00641821, + 0x3063fffe, 0xa7630012, 0x0e000b68, 0x00000000, 0x12e00003, 0x00000000, + 0x0e000f27, 0x00000000, 0x53c00004, 0x96a20008, 0x0e000c10, 0x00000000, + 0x96a20008, 0x8fbf0034, 0x8fbe0030, 0x8fb7002c, 0x8fb60028, 0x8fb50024, + 0x8fb40020, 0x8fb3001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x00021042, + 0x30420001, 0x03e00008, 0x27bd0038, 0x27bdffe8, 0xafbf0010, 0x97420108, + 0x2403000b, 0x304400ff, 0x1083004e, 0x2882000c, 0x10400011, 0x24020006, + 0x1082003e, 0x28820007, 0x10400007, 0x28820008, 0x1080002b, 0x24020001, + 0x1082002e, 0x3c026000, 0x0a000504, 0x00000000, 0x14400061, 0x2882000a, + 0x1440002b, 0x00000000, 0x0a0004ec, 0x00000000, 0x2402001c, 0x1082004e, + 0x2882001d, 0x1040000e, 0x24020019, 0x10820041, 0x2882001a, 0x10400005, + 0x2402000e, 0x10820036, 0x00000000, 0x0a000504, 0x00000000, 0x2402001b, + 0x1082003c, 0x00000000, 0x0a000504, 0x00000000, 0x240200c1, 0x10820040, + 0x288200c2, 0x10400005, 0x24020080, 0x1082001f, 0x00000000, 0x0a000504, + 0x00000000, 0x240200c2, 0x1082003b, 0x00000000, 0x0a000504, 0x00000000, + 0x3c026000, 0x0e000c7d, 0xac400808, 0x0a000506, 0x8fbf0010, 0x8c444448, + 0x3c030800, 0xac640064, 0x0e000c7d, 0x00000000, 0x3c026000, 0x8c444448, + 0x3c030800, 0x0a000505, 0xac640068, 0x8f440100, 0x0e000508, 0x00000000, + 0x3c026000, 0x8c444448, 0x3c030800, 0x0a000505, 0xac64006c, 0x0e000cab, + 0x00000000, 0x0a000506, 0x8fbf0010, 0x8f440100, 0x0e000cd5, 0x00000000, + 0x0a000506, 0x8fbf0010, 0x0e000d1c, 0x00000000, 0x0a000506, 0x8fbf0010, + 0x0000000d, 0x0a000506, 0x8fbf0010, 0x0e0005d7, 0x00000000, 0x0a000506, + 0x8fbf0010, 0x8f440100, 0x0e000d7e, 0x00000000, 0x0a000506, 0x8fbf0010, + 0x0e000e95, 0x00000000, 0x0a000506, 0x8fbf0010, 0x0e000626, 0x00000000, + 0x0a000506, 0x8fbf0010, 0x0e000b68, 0x00000000, 0x0a000506, 0x8fbf0010, + 0x0000000d, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0x3c029000, + 0x34420001, 0xafb00010, 0x00808021, 0x02021025, 0x3c038000, 0xafbf0014, + 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, + 0x34420001, 0xa3620005, 0x8f63004c, 0x8f620054, 0x10620019, 0x3c028000, + 0x9762006a, 0x00022880, 0x50a00001, 0x24050001, 0x97630068, 0x93640081, + 0x3c020800, 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, + 0x00a03021, 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021, + 0x8f420074, 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000, + 0x34420001, 0x02021025, 0x0e000c7d, 0xaf420020, 0x3c029000, 0x34420001, + 0x3c038000, 0x02021025, 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, + 0x3c028000, 0x9363007d, 0x34420001, 0x3c048000, 0x02021025, 0xa363007d, + 0xaf420020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x8fbf0014, 0xaf5001c0, + 0x8fb00010, 0x24020002, 0x3c031000, 0xa34201c4, 0xaf4301f8, 0x03e00008, + 0x27bd0018, 0x27bdffd8, 0xafbf0020, 0xafb3001c, 0xafb20018, 0xafb10014, + 0xafb00010, 0x93630005, 0x00809021, 0x24020030, 0x30630030, 0x14620072, + 0x00a09821, 0x3c020800, 0x8c430020, 0x1060006c, 0x00000000, 0x0e001006, + 0x00000000, 0x8f820018, 0xac520000, 0x9363003e, 0x9362003f, 0x8f840018, + 0x00031a00, 0x00431025, 0xac820004, 0x93630081, 0x93620082, 0x8f850018, + 0x00031e00, 0x00021400, 0x00621825, 0xaca30008, 0x8f840018, 0x8f620040, + 0xac82000c, 0x8f830018, 0x8f620048, 0xac620010, 0x8f840018, 0x8f62004c, + 0x3c110800, 0xac820014, 0x8f830018, 0x8f620050, 0x26304660, 0x00002021, + 0xac620018, 0x9602000e, 0x8f850018, 0x3c03c00b, 0x00431025, 0x0e001044, + 0xaca2001c, 0x8f830018, 0x8f620054, 0xac620000, 0x8f840018, 0x8f620058, + 0xac820004, 0x8f830018, 0x8f62005c, 0xac620008, 0x8f840018, 0x8f620060, + 0xac82000c, 0x8f850018, 0x8f620064, 0xaca20010, 0x97630068, 0x9762006a, + 0x8f840018, 0x00031c00, 0x00431025, 0xac820014, 0x8f830018, 0x00002021, + 0xac600018, 0x9602000e, 0x8f850018, 0x3c03c00c, 0x00431025, 0x0e001044, + 0xaca2001c, 0x8f840018, 0x8f630018, 0xac830000, 0x936200c4, 0x30420002, + 0x10400006, 0x00000000, 0x976200c8, 0x8f830018, 0x3042ffff, 0x0a0005b5, + 0xac620004, 0x8f820018, 0xac400004, 0x8f830018, 0x8f62006c, 0xac620008, + 0x8f840018, 0x8f6200dc, 0xac82000c, 0x8f830018, 0xac600010, 0x93620005, + 0x8f830018, 0x00021600, 0x00531025, 0xac620014, 0x8f850018, 0x3c026000, + 0x8c434448, 0x24040001, 0x26224660, 0xaca30018, 0x9443000e, 0x8f850018, + 0x3c02400d, 0x00621825, 0x0e001044, 0xaca3001c, 0x0e000d48, 0x02402021, + 0x8fbf0020, 0x8fb3001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x03e00008, + 0x27bd0028, 0x27bdffe0, 0xafb00010, 0x27500100, 0xafbf0018, 0xafb10014, + 0x9603000c, 0x240200c1, 0x5462001d, 0x8e040000, 0x3c029000, 0x8f440100, + 0x34420001, 0x3c038000, 0x00821025, 0xaf420020, 0x8f420020, 0x00431024, + 0x1440fffd, 0x00000000, 0x3c038000, 0x9362007d, 0x34630001, 0x3c058000, + 0x00831825, 0x34420004, 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00451024, + 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4401c0, 0xa34201c4, 0xaf4301f8, + 0x0a000622, 0x8fbf0018, 0x8f65004c, 0x24060001, 0x0e000db5, 0x2407049f, + 0x3c020800, 0x8c430020, 0x9611000c, 0x1060001d, 0x8e100000, 0x0e001006, + 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x00111400, 0xac820004, + 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, + 0x8f840018, 0x240204a2, 0xac820014, 0x8f850018, 0x3c026000, 0x8c434448, + 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024019, + 0x00621825, 0x0e001044, 0xaca3001c, 0x8fbf0018, 0x8fb10014, 0x8fb00010, + 0x03e00008, 0x27bd0020, 0x27bdffb0, 0xafb1002c, 0x27510100, 0xafbf004c, + 0xafbe0048, 0xafb70044, 0xafb60040, 0xafb5003c, 0xafb40038, 0xafb30034, + 0xafb20030, 0xafb00028, 0x8e350000, 0x9634000c, 0x3c026000, 0x8c434448, + 0x0000f021, 0xaf630170, 0x8f620040, 0x8e230014, 0x0000b821, 0x00431023, + 0x044001ec, 0x0000b021, 0x32820010, 0x1040002e, 0x3c026000, 0x9363003f, + 0x9222000e, 0x10430006, 0x2402000c, 0x9223000f, 0x10620003, 0x24020014, + 0x14620025, 0x3c026000, 0x32820004, 0x10400007, 0x241e0001, 0x8f620050, + 0x24420001, 0xaf620050, 0x8f630054, 0x24630001, 0xaf630054, 0x32830102, + 0x24020002, 0x5462000d, 0x9222000f, 0x8f620040, 0x24420001, 0xaf620040, + 0x8f630048, 0x8f620040, 0x24630001, 0x54620005, 0x9222000f, 0x8f620048, + 0x24420001, 0xaf620048, 0x9222000f, 0xa362003f, 0x9223000f, 0x24020012, + 0x14620007, 0x3c026000, 0x3c030800, 0x8c620074, 0x24420001, 0x0e000f6e, + 0xac620074, 0x3c026000, 0x8c434448, 0x32820040, 0xaf630174, 0x32830020, + 0xafa30010, 0x32830080, 0xafa30014, 0x32830001, 0xafa3001c, 0x32830008, + 0xafa30020, 0x32830100, 0x104000bb, 0xafa30018, 0x8e260010, 0x8f630054, + 0x24c2ffff, 0x00431023, 0x18400006, 0x00000000, 0x0000000d, 0x00000000, + 0x24000128, 0x0a0006b2, 0x00009021, 0x8f62004c, 0x00c21023, 0x18400028, + 0x00009021, 0x93650120, 0x93640121, 0x3c030800, 0x8c62008c, 0x308400ff, + 0x24420001, 0x30a500ff, 0x00804021, 0x1485000b, 0xac62008c, 0x3c040800, + 0x8c830090, 0x24630001, 0xac830090, 0x93620122, 0x30420001, 0x00021023, + 0x30420005, 0x0a0006b2, 0x34520004, 0x27670100, 0x00041080, 0x00e21021, + 0x8c430000, 0x00c31823, 0x04600004, 0x24820001, 0x30440007, 0x1485fff9, + 0x00041080, 0x10880007, 0x3c030800, 0xa3640121, 0x8c620094, 0x24120005, + 0x24420001, 0x0a0006b2, 0xac620094, 0x24120004, 0x32420001, 0x10400020, + 0x3c020800, 0x8c430020, 0x8e300000, 0x1060001c, 0x8e330010, 0x0e001006, + 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x24020001, 0xac820004, + 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, + 0x8f820018, 0xac530014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, + 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024010, 0x00621825, + 0x0e001044, 0xaca3001c, 0x32420004, 0x10400060, 0x00003821, 0x3c029000, + 0x8e260010, 0x34420001, 0x3c038000, 0x02a21025, 0xa360007c, 0xaf420020, + 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620023, 0x30420080, + 0x10400011, 0x00000000, 0x8f65005c, 0x8f63004c, 0x9764003c, 0x8f620064, + 0x00a32823, 0x00852821, 0x00a2102b, 0x54400006, 0x3c023fff, 0x93620023, + 0x3042007f, 0xa3620023, 0xaf660064, 0x3c023fff, 0x0a000702, 0x3442ffff, + 0x8f62005c, 0x00c21023, 0x04400011, 0x00000000, 0x8f65005c, 0x8f630064, + 0x9764003c, 0x3c023fff, 0x3442ffff, 0xaf660064, 0x00a32823, 0x00852821, + 0x0045102b, 0x10400004, 0x00c51021, 0x3c053fff, 0x34a5ffff, 0x00c51021, + 0xaf62005c, 0x24070001, 0xaf66004c, 0x8f620054, 0x14c20005, 0x00000000, + 0x93620023, 0x30420040, 0x10400017, 0x24020001, 0x9762006a, 0x00022880, + 0x50a00001, 0x24050001, 0x97630068, 0x93640081, 0x3c020800, 0x8c46004c, + 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021, 0x3c020800, + 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021, 0x8f420074, 0x2403fffe, + 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000, 0x34420001, 0x02a21025, + 0xa3600081, 0xaf420020, 0x9363007e, 0x9362007a, 0x10620005, 0x00e0b021, + 0x0e000f2a, 0x00000000, 0x00403821, 0x00e0b021, 0x8fa20010, 0x10400008, + 0x00000000, 0x8e220018, 0xaf620018, 0x8e23001c, 0xaf63001c, 0x8e220020, + 0x24160001, 0xaf620058, 0x13c00036, 0x32820004, 0x10400035, 0x8fa30014, + 0x93620023, 0x30420040, 0x10400031, 0x3c020800, 0x8c430020, 0x1060001c, + 0x8e300000, 0x0e001006, 0x00000000, 0x8f820018, 0xac500000, 0x8f830018, + 0xac600004, 0x8f820018, 0xac400008, 0x8f830018, 0xac60000c, 0x8f820018, + 0xac400010, 0x8f830018, 0x24020587, 0xac620014, 0x8f850018, 0x3c026000, + 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, + 0x3c024019, 0x00621825, 0x0e001044, 0xaca3001c, 0x3c029000, 0x34420001, + 0x02a21025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, + 0x24020001, 0xaf62000c, 0x93630023, 0x3c028000, 0x34420001, 0x02a21025, + 0x306300bf, 0xa3630023, 0xaf420020, 0x8fa30014, 0x10600012, 0x8fa3001c, + 0x9362007c, 0x24420001, 0xa362007c, 0x9363007e, 0x9362007a, 0x1462000b, + 0x8fa3001c, 0x9362007c, 0x3c030800, 0x8c640024, 0x0044102b, 0x14400005, + 0x8fa3001c, 0x0e000f2a, 0x00000000, 0x02c2b025, 0x8fa3001c, 0x3062ffff, + 0x10400003, 0x32820200, 0x0a000793, 0x24170004, 0x10400003, 0x00000000, + 0x24170040, 0x24160001, 0x13c0005d, 0x32820002, 0x1040005c, 0x8fa20020, + 0x9222000a, 0x30420020, 0x10400033, 0x3c100800, 0x93620023, 0x30420040, + 0x1040002f, 0x8e020020, 0x1040001e, 0x3c029000, 0x0e001006, 0x00000000, + 0x8f820018, 0xac550000, 0x8f840018, 0x3c02008d, 0xac820004, 0x8f830018, + 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f840018, + 0x240205bf, 0xac820014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, + 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024019, 0x00621825, + 0x0e001044, 0xaca3001c, 0x3c029000, 0x34420001, 0x02a21025, 0xaf420020, + 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93630023, + 0x3c028000, 0x34420001, 0x02a21025, 0x306300bf, 0xa3630023, 0xaf420020, + 0x8e020020, 0x10400023, 0x8fa20020, 0x0e001006, 0x00000000, 0x8f840018, + 0x8e230000, 0xac830000, 0x9222000a, 0x8f830018, 0x00021600, 0xac620004, + 0x8f840018, 0x8f620040, 0xac820008, 0x8f850018, 0x8f63004c, 0xaca3000c, + 0x9362003f, 0x8f840018, 0x304200ff, 0xac820010, 0x8f830018, 0x3c026000, + 0xac600014, 0x8f850018, 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, + 0x9443466e, 0x8f850018, 0x3c02401a, 0x00621825, 0x0e001044, 0xaca3001c, + 0x8fa20020, 0x1040000e, 0x8fa20018, 0x9222000a, 0xa3620082, 0x56e00005, + 0x36f70008, 0x8fa30018, 0x10600004, 0x00000000, 0x36f70008, 0x0a000801, + 0x24160001, 0x0e000de1, 0x02a02021, 0x8fa20018, 0x10400003, 0x00000000, + 0x36f70010, 0x24160001, 0x12c00019, 0x3c029000, 0x34420001, 0x02a21025, + 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, + 0x3c038000, 0x9362007d, 0x34630001, 0x3c048000, 0x02a31825, 0x02e21025, + 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, + 0x3c031000, 0xaf5501c0, 0xa34201c4, 0xaf4301f8, 0x9363003f, 0x24020012, + 0x14620004, 0x3c026000, 0x0e000f6e, 0x00000000, 0x3c026000, 0x8c434448, + 0xaf630178, 0x8fbf004c, 0x8fbe0048, 0x8fb70044, 0x8fb60040, 0x8fb5003c, + 0x8fb40038, 0x8fb30034, 0x8fb20030, 0x8fb1002c, 0x8fb00028, 0x03e00008, + 0x27bd0050, 0x27bdffe8, 0xafbf0014, 0xafb00010, 0x8f500180, 0x97420184, + 0x30420200, 0x14400015, 0x00000000, 0x8f430188, 0x3c02ff00, 0x00621824, + 0x3c020200, 0x10620031, 0x0043102b, 0x14400007, 0x3c020300, 0x1060000b, + 0x3c020100, 0x1062000d, 0x00000000, 0x0a0008b4, 0x00000000, 0x10620027, + 0x3c020400, 0x1062003e, 0x02002021, 0x0a0008b4, 0x00000000, 0x0e000e1e, + 0x02002021, 0x0a0008b6, 0x8fbf0014, 0x93620005, 0x30420020, 0x1440005e, + 0x8fbf0014, 0x3c029000, 0x34420001, 0x02021025, 0xaf420020, 0x3c038000, + 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, 0x3c038000, + 0x34630001, 0x02031825, 0x34420020, 0xa3620005, 0xaf430020, 0x93620005, + 0x30420020, 0x14400003, 0x02002021, 0x0000000d, 0x02002021, 0x0e000553, + 0x24055854, 0x0a0008b6, 0x8fbf0014, 0x93620005, 0x30420001, 0x1040003f, + 0x3c029000, 0x34420001, 0x02021025, 0xaf420020, 0x3c038000, 0x8f420020, + 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, 0x3c048000, 0x3c030800, + 0x304200fe, 0xa3620005, 0x8c620020, 0x34840001, 0x02042025, 0xaf440020, + 0x1040002d, 0x8fbf0014, 0x0a000894, 0x00000000, 0x00002821, 0x00003021, + 0x0e000f78, 0x240706a4, 0x3c020800, 0x8c430020, 0x10600023, 0x8fbf0014, + 0x0e001006, 0x00000000, 0x8f820018, 0xac500000, 0x93630082, 0x9362003f, + 0x8f840018, 0x00031a00, 0x00431025, 0xac820004, 0x8f830018, 0xac600008, + 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018, 0xac400014, + 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, + 0x9443466e, 0x8f850018, 0x3c02400a, 0x00621825, 0x0e001044, 0xaca3001c, + 0x0a0008b6, 0x8fbf0014, 0x0000000d, 0x8fbf0014, 0x8fb00010, 0x03e00008, + 0x27bd0018, 0x27bdffe8, 0xafbf0010, 0x93420148, 0x2444ffff, 0x2c830005, + 0x10600047, 0x3c020800, 0x24424598, 0x00041880, 0x00621821, 0x8c640000, + 0x00800008, 0x00000000, 0x8f430144, 0x8f62000c, 0x14620006, 0x24020001, + 0xaf62000c, 0x0e000909, 0x00000000, 0x0a000907, 0x8fbf0010, 0x8f62000c, + 0x0a000900, 0x00000000, 0x97630010, 0x8f420144, 0x14430006, 0x24020001, + 0xa7620010, 0x0e000eeb, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620010, + 0x0a000900, 0x00000000, 0x97630012, 0x8f420144, 0x14430006, 0x24020001, + 0xa7620012, 0x0e000f06, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620012, + 0x0a000900, 0x00000000, 0x97630014, 0x8f420144, 0x14430006, 0x24020001, + 0xa7620014, 0x0e000f21, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620014, + 0x0a000900, 0x00000000, 0x97630016, 0x8f420144, 0x14430006, 0x24020001, + 0xa7620016, 0x0e000f24, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620016, + 0x14400006, 0x8fbf0010, 0x3c030800, 0x8c620070, 0x24420001, 0xac620070, + 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0xafbf0010, 0x93620081, + 0x3c030800, 0x8c640048, 0x0044102b, 0x14400028, 0x3c029000, 0x8f460140, + 0x34420001, 0x3c038000, 0x00c21025, 0xaf420020, 0x8f420020, 0x00431024, + 0x1440fffd, 0x3c048000, 0x34840001, 0x3c059000, 0x34a50001, 0x3c078000, + 0x24020012, 0x24030080, 0x00c42025, 0x00c52825, 0xa362003f, 0xa3630082, + 0xaf440020, 0xaf450020, 0x8f420020, 0x00471024, 0x1440fffd, 0x3c038000, + 0x9362007d, 0x34630001, 0x3c048000, 0x00c31825, 0x34420020, 0xa362007d, + 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, + 0x0a00096d, 0xaf4601c0, 0x93620081, 0x24420001, 0x0e000f2a, 0xa3620081, + 0x9763006a, 0x00032880, 0x14a00002, 0x00403821, 0x24050001, 0x97630068, + 0x93640081, 0x3c020800, 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b, + 0x54400001, 0x00a03021, 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001, + 0x00c02021, 0x8f420074, 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c, + 0x10e0001a, 0x3c029000, 0x8f440140, 0x34420001, 0x3c038000, 0x00821025, + 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, + 0x9362007d, 0x34630001, 0x3c058000, 0x00831825, 0x34420004, 0xa362007d, + 0xaf430020, 0x8f4201f8, 0x00451024, 0x1440fffd, 0x24020002, 0x3c031000, + 0xaf4401c0, 0xa34201c4, 0xaf4301f8, 0x8fbf0010, 0x03e00008, 0x27bd0018, + 0x27bdffd8, 0xafb3001c, 0x27530100, 0xafbf0024, 0xafb40020, 0xafb20018, + 0xafb10014, 0xafb00010, 0x96620008, 0x3c140800, 0x8f520100, 0x30420001, + 0x104000cf, 0x00000000, 0x8e700018, 0x8f630054, 0x2602ffff, 0x00431023, + 0x18400006, 0x00000000, 0x0000000d, 0x00000000, 0x24000128, 0x0a0009b6, + 0x00008821, 0x8f62004c, 0x02021023, 0x18400028, 0x00008821, 0x93650120, + 0x93640121, 0x3c030800, 0x8c62008c, 0x308400ff, 0x24420001, 0x30a500ff, + 0x00803821, 0x1485000b, 0xac62008c, 0x3c040800, 0x8c830090, 0x24630001, + 0xac830090, 0x93620122, 0x30420001, 0x00021023, 0x30420005, 0x0a0009b6, + 0x34510004, 0x27660100, 0x00041080, 0x00c21021, 0x8c430000, 0x02031823, + 0x04600004, 0x24820001, 0x30440007, 0x1485fff9, 0x00041080, 0x10870007, + 0x3c030800, 0xa3640121, 0x8c620094, 0x24110005, 0x24420001, 0x0a0009b6, + 0xac620094, 0x24110004, 0x32220001, 0x1040001e, 0x8e820020, 0x1040001d, + 0x32220004, 0x0e001006, 0x00000000, 0x8f820018, 0xac520000, 0x8f840018, + 0x24020001, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, + 0x8f830018, 0xac600010, 0x8f820018, 0xac500014, 0x8f850018, 0x3c026000, + 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, + 0x3c024010, 0x00621825, 0x0e001044, 0xaca3001c, 0x32220004, 0x10400076, + 0x00003821, 0x3c029000, 0x34420001, 0x3c038000, 0x02421025, 0xa360007c, + 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620023, + 0x30420080, 0x10400011, 0x00000000, 0x8f65005c, 0x8f63004c, 0x9764003c, + 0x8f620064, 0x00a32823, 0x00852821, 0x00a2102b, 0x54400006, 0x3c023fff, + 0x93620023, 0x3042007f, 0xa3620023, 0xaf700064, 0x3c023fff, 0x0a000a03, + 0x3442ffff, 0x8f62005c, 0x02021023, 0x04400011, 0x00000000, 0x8f65005c, + 0x8f630064, 0x9764003c, 0x3c023fff, 0x3442ffff, 0xaf700064, 0x00a32823, + 0x00852821, 0x0045102b, 0x10400004, 0x02051021, 0x3c053fff, 0x34a5ffff, + 0x02051021, 0xaf62005c, 0x24070001, 0xaf70004c, 0x8f620054, 0x16020005, + 0x00000000, 0x93620023, 0x30420040, 0x10400017, 0x24020001, 0x9762006a, + 0x00022880, 0x50a00001, 0x24050001, 0x97630068, 0x93640081, 0x3c020800, + 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021, + 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021, 0x8f420074, + 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000, 0x34420001, + 0x02421025, 0xa3600081, 0xaf420020, 0x9363007e, 0x9362007a, 0x10620004, + 0x00000000, 0x0e000f2a, 0x00000000, 0x00403821, 0x10e00017, 0x3c029000, + 0x34420001, 0x02421025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, + 0x1440fffd, 0x3c028000, 0x9363007d, 0x34420001, 0x3c048000, 0x02421025, + 0xa363007d, 0xaf420020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, + 0x3c031000, 0xaf5201c0, 0xa34201c4, 0xaf4301f8, 0x9342010b, 0x8e830020, + 0x27500100, 0x38420006, 0x10600029, 0x2c510001, 0x0e001006, 0x00000000, + 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018, 0x96020008, 0xac820004, + 0x8f830018, 0x8e020014, 0xac620008, 0x8f850018, 0x3c026000, 0x8c434448, + 0xaca3000c, 0x8f840018, 0x96020012, 0xac820010, 0x8f850018, 0x8e030020, + 0xaca30014, 0x9602000c, 0x9603000e, 0x8f840018, 0x00021400, 0x00431025, + 0xac820018, 0x12200005, 0x3c020800, 0x9443466e, 0x8f840018, 0x0a000a78, + 0x3c024013, 0x9443466e, 0x8f840018, 0x3c024014, 0x00621825, 0xac83001c, + 0x0e001044, 0x24040001, 0x8e630014, 0x8f620040, 0x14430003, 0x00431023, + 0x0a000a83, 0x00001021, 0x28420001, 0x10400034, 0x00000000, 0x8f620040, + 0xaf630040, 0x9362003e, 0x30420001, 0x1440000b, 0x3c029000, 0x93620022, + 0x24420001, 0xa3620022, 0x93630022, 0x3c020800, 0x8c440098, 0x0064182b, + 0x1460001e, 0x3c020800, 0x3c029000, 0x34420001, 0x02421025, 0xaf420020, + 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, + 0x9362007d, 0x34630001, 0x3c048000, 0x02431825, 0x34420001, 0xa362007d, + 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, + 0xaf5201c0, 0xa34201c4, 0x24020001, 0xaf4301f8, 0xa7620012, 0x0a000ab6, + 0xa3600022, 0x9743007a, 0x9444002a, 0x00641821, 0x3063fffe, 0xa7630012, + 0x0e000b68, 0x00000000, 0x97420108, 0x8fbf0024, 0x8fb40020, 0x8fb3001c, + 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x00021042, 0x30420001, 0x03e00008, + 0x27bd0028, 0x27bdffe0, 0xafb20018, 0x3c120800, 0x8e420020, 0xafb00010, + 0x27500100, 0xafbf001c, 0x10400046, 0xafb10014, 0x0e001006, 0x00000000, + 0x8f840018, 0x8e020000, 0xac820000, 0x936300b1, 0x936200c5, 0x8f850018, + 0x00031e00, 0x00021400, 0x34420100, 0x00621825, 0xaca30004, 0x8f840018, + 0x8e02001c, 0xac820008, 0x8f830018, 0x8f620048, 0xac62000c, 0x8f840018, + 0x96020012, 0xac820010, 0x8f830018, 0x8f620040, 0x24040001, 0xac620014, + 0x8f850018, 0x3c026000, 0x8c434448, 0x3c020800, 0x24514660, 0xaca30018, + 0x9623000e, 0x8f850018, 0x3c024016, 0x00621825, 0x0e001044, 0xaca3001c, + 0x96030008, 0x30630010, 0x1060001c, 0x8e420020, 0x1040001a, 0x8e100000, + 0x0e001006, 0x00000000, 0x8f820018, 0xac500000, 0x8f830018, 0xac600004, + 0x8f820018, 0xac400008, 0x8f830018, 0xac60000c, 0x8f820018, 0xac400010, + 0x8f830018, 0xac600014, 0x8f850018, 0x3c036000, 0x8c634448, 0x24040001, + 0xaca30018, 0x9622000e, 0x8f850018, 0x3c034015, 0x00431025, 0x0e001044, + 0xaca2001c, 0x00001021, 0x8fbf001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, + 0x03e00008, 0x27bd0020, 0x27bdffe0, 0xafb20018, 0x3c120800, 0x8e420020, + 0xafb00010, 0x27500100, 0xafbf001c, 0x10400041, 0xafb10014, 0x0e001006, + 0x00000000, 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018, 0x24020100, + 0xac820004, 0x8f830018, 0x8e02001c, 0xac620008, 0x8f840018, 0x8e020018, + 0xac82000c, 0x8f830018, 0x96020012, 0xac620010, 0x8f840018, 0x96020008, + 0xac820014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, 0x3c020800, + 0x24514660, 0xaca30018, 0x9623000e, 0x8f850018, 0x3c024017, 0x00621825, + 0x0e001044, 0xaca3001c, 0x96030008, 0x30630010, 0x1060001c, 0x8e420020, + 0x1040001a, 0x8e100000, 0x0e001006, 0x00000000, 0x8f820018, 0xac500000, + 0x8f830018, 0xac600004, 0x8f820018, 0xac400008, 0x8f830018, 0xac60000c, + 0x8f820018, 0xac400010, 0x8f830018, 0xac600014, 0x8f850018, 0x3c036000, + 0x8c634448, 0x24040001, 0xaca30018, 0x9622000e, 0x8f850018, 0x3c034015, + 0x00431025, 0x0e001044, 0xaca2001c, 0x00001021, 0x8fbf001c, 0x8fb20018, + 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x27bdffe8, 0xafbf0010, + 0x936200c4, 0x30420002, 0x10400019, 0x00000000, 0x936200c5, 0x936300b1, + 0x00431023, 0x304400ff, 0x30830080, 0x10600004, 0x00000000, 0x0000000d, + 0x00000000, 0x24000a6a, 0x93620004, 0x00441023, 0x304400ff, 0x30830080, + 0x10600004, 0x2482ffff, 0x8f650024, 0x0a000b82, 0x00000000, 0x00022b00, + 0x8f620024, 0x0045102b, 0x10400002, 0x00000000, 0x8f650024, 0x8f620048, + 0x8f630040, 0x00431823, 0x0065202b, 0x10800004, 0x00000000, 0x8f620040, + 0x00451021, 0xaf620048, 0x9762003c, 0x0062102b, 0x10400041, 0x8fbf0010, + 0x10a0003f, 0x3c029000, 0x34420001, 0x3c040800, 0x8c830080, 0x8f450100, + 0x3c068000, 0x24630001, 0x00a21025, 0xac830080, 0xaf420020, 0x8f420020, + 0x00461024, 0x1440fffd, 0x3c038000, 0x9362007d, 0x34630001, 0x3c048000, + 0x00a31825, 0x34420004, 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00441024, + 0x1440fffd, 0x24020002, 0x3c030800, 0xaf4501c0, 0xa34201c4, 0x8c640020, + 0x3c021000, 0xaf4201f8, 0x1080001f, 0x8fbf0010, 0x0e001006, 0x00000000, + 0x8f830018, 0x8f420100, 0xac620000, 0x8f840018, 0x8f620040, 0xac820004, + 0x8f850018, 0x8f620048, 0xaca20008, 0x8f830018, 0xac60000c, 0x8f820018, + 0xac400010, 0x8f830018, 0x3c026000, 0xac600014, 0x8f840018, 0x8c434448, + 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c0240c2, 0x00621825, + 0xac83001c, 0x0e001044, 0x24040001, 0x8fbf0010, 0x03e00008, 0x27bd0018, + 0x3c020800, 0x24423958, 0xaf82000c, 0x03e00008, 0x00000000, 0x27bdffe8, + 0xafb00010, 0x27500100, 0xafbf0014, 0x8e02001c, 0x14400003, 0x3c020800, + 0x0000000d, 0x3c020800, 0x8c430020, 0x10600026, 0x00001021, 0x0e001006, + 0x00000000, 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018, 0x8e02001c, + 0xac820004, 0x8f830018, 0xac600008, 0x8f840018, 0x8e020018, 0xac82000c, + 0x8f850018, 0x96020012, 0xaca20010, 0x8f830018, 0x3c106000, 0xac600014, + 0x8f840018, 0x8e024448, 0x3c030800, 0xac820018, 0x9462466e, 0x8f840018, + 0x3c034012, 0x00431025, 0xac82001c, 0x0e001044, 0x24040001, 0x8e036800, + 0x00001021, 0x3c040001, 0x00641825, 0xae036800, 0x0a000c0d, 0x8fbf0014, + 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c020800, 0x97430078, + 0x9444002e, 0x00001021, 0x00641821, 0x3063fffe, 0x03e00008, 0xa7630010, + 0x27450100, 0x8f640048, 0x8ca30018, 0x00641023, 0x18400021, 0x00000000, + 0xaf630048, 0x8f620040, 0x9763003c, 0x00821023, 0x0043102a, 0x1040001a, + 0x3c029000, 0x8ca40000, 0x34420001, 0x3c038000, 0x00821025, 0xaf420020, + 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, 0x9362007d, + 0x34630001, 0x3c058000, 0x00831825, 0x34420004, 0xa362007d, 0xaf430020, + 0x8f4201f8, 0x00451024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4401c0, + 0xa34201c4, 0xaf4301f8, 0x03e00008, 0x00001021, 0x8f420100, 0x34420001, + 0xaf4200a4, 0x03e00008, 0x00001021, 0x27bdffe0, 0xafbf0018, 0xafb10014, + 0xafb00010, 0x9362007e, 0x30d000ff, 0x16020029, 0x00808821, 0x93620080, + 0x16020026, 0x00000000, 0x9362007f, 0x16020023, 0x00000000, 0x9362007a, + 0x16020004, 0x00000000, 0x0000000d, 0x00000000, 0x24000771, 0x0e000f49, + 0x00000000, 0x3c039000, 0x34630001, 0x3c048000, 0x02231825, 0xa370007a, + 0xaf430020, 0x8f420020, 0x00441024, 0x1440fffd, 0x3c028000, 0x9363007d, + 0x34420001, 0x3c048000, 0x02221025, 0xa363007d, 0xaf420020, 0x8f4201f8, + 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf5101c0, 0xa34201c4, + 0xaf4301f8, 0x0a000c79, 0x8fbf0018, 0x0000000d, 0x00000000, 0x24000781, + 0x8fbf0018, 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3c020800, + 0x8c430020, 0x27bdffe8, 0xafb00010, 0x27500100, 0x10600024, 0xafbf0014, + 0x0e001006, 0x00000000, 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018, + 0x8e020004, 0xac820004, 0x8f830018, 0x8e020018, 0xac620008, 0x8f840018, + 0x8e03001c, 0xac83000c, 0x9602000c, 0x9203000a, 0x8f840018, 0x00021400, + 0x00431025, 0xac820010, 0x8f830018, 0x3c026000, 0xac600014, 0x8f840018, + 0x8c434448, 0xac830018, 0x96020008, 0x3c030800, 0x9464466e, 0x8f850018, + 0x00021400, 0x00441025, 0x24040001, 0x0e001044, 0xaca2001c, 0x8fbf0014, + 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c020800, 0x8c430020, 0x27bdffe8, + 0xafb00010, 0x27500100, 0x10600020, 0xafbf0014, 0x0e001006, 0x00000000, + 0x8f820018, 0xac400000, 0x8f830018, 0xac600004, 0x8f820018, 0xac400008, + 0x8f830018, 0xac60000c, 0x9602000c, 0x9603000e, 0x8f840018, 0x00021400, + 0x00431025, 0xac820010, 0x8f830018, 0x3c026000, 0xac600014, 0x8f840018, + 0x8c434448, 0xac830018, 0x96020008, 0x3c030800, 0x9464466e, 0x8f850018, + 0x00021400, 0x00441025, 0x24040001, 0x0e001044, 0xaca2001c, 0x8fbf0014, + 0x8fb00010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0xafb00010, 0x27500100, + 0xafbf0014, 0x9602000c, 0x10400024, 0x00802821, 0x3c020800, 0x8c430020, + 0x1060003a, 0x8fbf0014, 0x0e001006, 0x00000000, 0x8f840018, 0x8e030000, + 0xac830000, 0x9602000c, 0x8f840018, 0x00021400, 0xac820004, 0x8f830018, + 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018, + 0xac400014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, 0x3c020800, + 0xaca30018, 0x9443466e, 0x8f850018, 0x3c02400b, 0x00621825, 0x0e001044, + 0xaca3001c, 0x0a000d19, 0x8fbf0014, 0x93620005, 0x30420010, 0x14400015, + 0x3c029000, 0x34420001, 0x00a21025, 0xaf420020, 0x3c038000, 0x8f420020, + 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, 0x93620005, 0x34630001, + 0x00a02021, 0x00a31825, 0x24055852, 0x34420010, 0xa3620005, 0x0e000553, + 0xaf430020, 0x0a000d19, 0x8fbf0014, 0x0000000d, 0x8fbf0014, 0x8fb00010, + 0x03e00008, 0x27bd0018, 0x3c020800, 0x8c430020, 0x27bdffe8, 0xafb00010, + 0x27500100, 0x10600022, 0xafbf0014, 0x0e001006, 0x00000000, 0x8f840018, + 0x8e020004, 0xac820000, 0x9603000c, 0x9762002c, 0x8f840018, 0x00031c00, + 0x00431025, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, + 0x8f830018, 0xac600010, 0x8f820018, 0xac400014, 0x8f850018, 0x3c026000, + 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, + 0x3c02400e, 0x00621825, 0x0e001044, 0xaca3001c, 0x0e000d48, 0x8e040000, + 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c038000, 0x8f420278, + 0x00431024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf440240, 0xa3420244, + 0x03e00008, 0xaf430278, 0x3c020800, 0x8c430020, 0x27bdffe0, 0xafb10014, + 0x00808821, 0xafb20018, 0x00c09021, 0xafb00010, 0x30b0ffff, 0x1060001c, + 0xafbf001c, 0x0e001006, 0x00000000, 0x8f820018, 0xac510000, 0x8f840018, + 0x00101400, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, + 0x8f830018, 0xac600010, 0x8f820018, 0xac520014, 0x8f840018, 0x3c026000, + 0x8c434448, 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c024019, + 0x00621825, 0xac83001c, 0x0e001044, 0x24040001, 0x8fbf001c, 0x8fb20018, + 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x27bdffe8, 0x27450100, + 0xafbf0010, 0x94a3000c, 0x240200c1, 0x14620029, 0x00803021, 0x3c029000, + 0x34420001, 0x00c21025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, + 0x1440fffd, 0x3c028000, 0x34420001, 0x3c049000, 0x34840001, 0x3c058000, + 0x24030012, 0x00c21025, 0x00c42025, 0xa363003f, 0xaf420020, 0xaf440020, + 0x8f420020, 0x00451024, 0x1440fffd, 0x3c038000, 0x9362007d, 0x34630001, + 0x3c048000, 0x00c31825, 0x34420020, 0xa362007d, 0xaf430020, 0x8f4201f8, + 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4601c0, 0xa34201c4, + 0xaf4301f8, 0x0a000db3, 0x8fbf0010, 0x00c02021, 0x94a5000c, 0x24060001, + 0x0e000f78, 0x240706d8, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x3c020800, + 0x8c430020, 0x27bdffe0, 0xafb00010, 0x00808021, 0xafb20018, 0x00a09021, + 0xafb10014, 0x30d100ff, 0x1060001c, 0xafbf001c, 0x0e001006, 0x00000000, + 0x8f820018, 0xac500000, 0x8f840018, 0x24020001, 0xac820004, 0x8f830018, + 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018, + 0xac520014, 0x8f840018, 0x3c026000, 0x8c434448, 0x3c020800, 0xac830018, + 0x9443466e, 0x8f840018, 0x3c024010, 0x00621825, 0xac83001c, 0x0e001044, + 0x02202021, 0x8fbf001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x03e00008, + 0x27bd0020, 0x27bdffe8, 0xafbf0014, 0xafb00010, 0x93620005, 0x30420001, + 0x10400033, 0x00808021, 0x3c029000, 0x34420001, 0x02021025, 0xaf420020, + 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, + 0x3c048000, 0x3c030800, 0x304200fe, 0xa3620005, 0x8c620020, 0x34840001, + 0x02042025, 0xaf440020, 0x10400020, 0x8fbf0014, 0x0e001006, 0x00000000, + 0x8f820018, 0xac500000, 0x93630082, 0x9362003f, 0x8f840018, 0x00031a00, + 0x00431025, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, + 0x8f830018, 0xac600010, 0x8f820018, 0xac400014, 0x8f840018, 0x3c026000, + 0x8c434448, 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c02400a, + 0x00621825, 0xac83001c, 0x0e001044, 0x24040001, 0x8fbf0014, 0x8fb00010, + 0x03e00008, 0x27bd0018, 0x27bdffe8, 0xafbf0010, 0x8f420188, 0x00803021, + 0x9364003f, 0x24030012, 0x00021402, 0x1483001c, 0x304500ff, 0x3c029000, + 0x34420001, 0x3c038000, 0x00c21025, 0xa3650080, 0xa365007a, 0xaf420020, + 0x8f420020, 0x00431024, 0x1440fffd, 0x3c028000, 0x9363007d, 0x34420001, + 0x3c048000, 0x00c21025, 0xa363007d, 0xaf420020, 0x8f4201f8, 0x00441024, + 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4601c0, 0xa34201c4, 0xaf4301f8, + 0x0a000e54, 0x8fbf0010, 0x9362007e, 0x1445000e, 0x00000000, 0x93620080, + 0x1045000b, 0x00000000, 0xa3650080, 0x8f820000, 0x93660080, 0x8f440180, + 0x8f65004c, 0x8c430000, 0x0060f809, 0x00000000, 0x0a000e54, 0x8fbf0010, + 0xa3650080, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x3c020800, 0x8c430020, + 0x27bdffe0, 0xafb10014, 0x00808821, 0xafb20018, 0x00a09021, 0xafb00010, + 0x30d000ff, 0x1060002f, 0xafbf001c, 0x0e001006, 0x00000000, 0x8f820018, + 0xac510000, 0x8f830018, 0xac700004, 0x8f820018, 0xac520008, 0x8f830018, + 0xac60000c, 0x8f820018, 0xac400010, 0x9763006a, 0x00032880, 0x50a00001, + 0x24050001, 0x97630068, 0x93640081, 0x3c020800, 0x8c46004c, 0x00652821, + 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021, 0x3c020800, 0x8c440050, + 0x00c4182b, 0x54600001, 0x00c02021, 0x8f830018, 0x2402fffe, 0x00822824, + 0x3c026000, 0xac650014, 0x8f840018, 0x8c434448, 0x3c020800, 0xac830018, + 0x9443466e, 0x8f840018, 0x3c024011, 0x00621825, 0xac83001c, 0x0e001044, + 0x24040001, 0x8fbf001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x03e00008, + 0x27bd0020, 0x27bdffe8, 0xafbf0014, 0xafb00010, 0x8f440100, 0x27500100, + 0x8f650050, 0x0e000c45, 0x9206001b, 0x3c020800, 0x8c430020, 0x1060001d, + 0x8e100018, 0x0e001006, 0x00000000, 0x8f840018, 0x8f420100, 0xac820000, + 0x8f830018, 0xac700004, 0x8f840018, 0x8f620050, 0xac820008, 0x8f830018, + 0xac60000c, 0x8f820018, 0xac400010, 0x8f830018, 0x3c026000, 0xac600014, + 0x8f850018, 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, + 0x8f850018, 0x3c02401c, 0x00621825, 0x0e001044, 0xaca3001c, 0x8fbf0014, + 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c029000, 0x8f460140, 0x34420001, + 0x3c038000, 0x00c21025, 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, + 0x3c048000, 0x34840001, 0x3c059000, 0x34a50001, 0x3c078000, 0x24020012, + 0x24030080, 0x00c42025, 0x00c52825, 0xa362003f, 0xa3630082, 0xaf440020, + 0xaf450020, 0x8f420020, 0x00471024, 0x1440fffd, 0x3c038000, 0x9362007d, + 0x34630001, 0x3c048000, 0x00c31825, 0x34420020, 0xa362007d, 0xaf430020, + 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4601c0, + 0xa34201c4, 0x03e00008, 0xaf4301f8, 0x8f430238, 0x3c020800, 0x04610013, + 0x8c44009c, 0x2406fffe, 0x3c050800, 0x3c038000, 0x2484ffff, 0x14800009, + 0x00000000, 0x97420078, 0x8ca3007c, 0x24420001, 0x00461024, 0x24630001, + 0xa7620010, 0x03e00008, 0xaca3007c, 0x8f420238, 0x00431024, 0x1440fff3, + 0x2484ffff, 0x8f420140, 0x3c031000, 0xaf420200, 0x03e00008, 0xaf430238, + 0x3c029000, 0x8f440140, 0x34420001, 0x3c038000, 0x00821025, 0xaf420020, + 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, 0x9362007d, + 0x34630001, 0x3c058000, 0x00831825, 0x34420001, 0xa362007d, 0xaf430020, + 0x8f4201f8, 0x00451024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4401c0, + 0xa34201c4, 0x03e00008, 0xaf4301f8, 0x0000000d, 0x03e00008, 0x00000000, + 0x0000000d, 0x03e00008, 0x00000000, 0x24020001, 0x03e00008, 0xa7620010, + 0x9362003f, 0x304400ff, 0x3883000e, 0x2c630001, 0x38820010, 0x2c420001, + 0x00621825, 0x14600003, 0x24020012, 0x14820003, 0x00000000, 0x03e00008, + 0x00001021, 0x9363007e, 0x9362007a, 0x14620006, 0x00000000, 0x9363007e, + 0x24020001, 0x24630001, 0x03e00008, 0xa363007e, 0x9363007e, 0x93620080, + 0x14620004, 0x24020001, 0xa362000b, 0x03e00008, 0x24020001, 0x03e00008, + 0x00001021, 0x9362000b, 0x10400021, 0x00001021, 0xa360000b, 0x9362003f, + 0x304400ff, 0x3883000e, 0x2c630001, 0x38820010, 0x2c420001, 0x00621825, + 0x14600015, 0x00001821, 0x24020012, 0x10820012, 0x00000000, 0x9363007e, + 0x9362007a, 0x14620007, 0x00000000, 0x9362007e, 0x24030001, 0x24420001, + 0xa362007e, 0x03e00008, 0x00601021, 0x9363007e, 0x93620080, 0x14620004, + 0x00001821, 0x24020001, 0xa362000b, 0x24030001, 0x03e00008, 0x00601021, + 0x03e00008, 0x00000000, 0x24040001, 0xaf64000c, 0x8f6300dc, 0x8f6200cc, + 0x50620001, 0xa7640010, 0xa7640012, 0xa7640014, 0x03e00008, 0xa7640016, + 0x27bdffd8, 0xafb00010, 0x00808021, 0xafb3001c, 0x00c09821, 0xafbf0020, + 0xafb20018, 0xafb10014, 0x93620023, 0x00e09021, 0x30420040, 0x10400020, + 0x30b1ffff, 0x3c020800, 0x8c430020, 0x1060001c, 0x00000000, 0x0e001006, + 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x3c02008d, 0xac820004, + 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, + 0x8f820018, 0xac520014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, + 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024019, 0x00621825, + 0x0e001044, 0xaca3001c, 0x93620023, 0x30420020, 0x14400003, 0x3c020800, + 0x52600020, 0x3c029000, 0x8c430020, 0x1060001d, 0x3c029000, 0x0e001006, + 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x00111400, 0xac820004, + 0x8f830018, 0xac720008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, + 0x8f820018, 0xac400014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, + 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c02401b, 0x00621825, + 0x0e001044, 0xaca3001c, 0x3c029000, 0x34420001, 0x02021025, 0xaf420020, + 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93630023, + 0x3c028000, 0x34420001, 0x02021025, 0x8fbf0020, 0x8fb3001c, 0x8fb20018, + 0x8fb10014, 0x8fb00010, 0x3063009f, 0xa3630023, 0xaf420020, 0x03e00008, + 0x27bd0028, 0x3c020800, 0x8c430020, 0x27bdffe8, 0xafb00010, 0x27500100, + 0x1060001d, 0xafbf0014, 0x0e001006, 0x00000000, 0x8f830018, 0x8e020004, + 0xac620000, 0x8f840018, 0x8e020018, 0xac820004, 0x8f850018, 0x8e020000, + 0xaca20008, 0x8f830018, 0xac60000c, 0x8f820018, 0xac400010, 0x8f830018, + 0xac600014, 0x8f820018, 0xac400018, 0x96030008, 0x3c020800, 0x9444466e, + 0x8f850018, 0x00031c00, 0x00641825, 0x24040001, 0x0e001044, 0xaca3001c, + 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c060800, 0x24c54660, + 0x3c02000a, 0x03421821, 0x94640006, 0x94a2000a, 0x00441023, 0x00021400, + 0x00021c03, 0x04610006, 0xa4a40006, 0x0000000d, 0x00000000, 0x2400005a, + 0x0a00101b, 0x24020001, 0x8f820014, 0x0062102b, 0x14400002, 0x00001021, + 0x24020001, 0x304200ff, 0x1040001c, 0x274a0400, 0x3c07000a, 0x3c020800, + 0x24454660, 0x94a9000a, 0x8f880014, 0x03471021, 0x94430006, 0x00402021, + 0xa4a30006, 0x94820006, 0xa4a20006, 0x01221023, 0x00021400, 0x00021403, + 0x04410006, 0x0048102b, 0x0000000d, 0x00000000, 0x2400005a, 0x0a001036, + 0x24020001, 0x14400002, 0x00001021, 0x24020001, 0x304200ff, 0x1440ffec, + 0x03471021, 0x24c44660, 0x8c820010, 0xaf420038, 0x8c830014, 0x3c020005, + 0xaf43003c, 0xaf420030, 0xaf800010, 0xaf8a0018, 0x03e00008, 0x00000000, + 0x27bdffe0, 0x8f820010, 0x8f850018, 0x3c070800, 0x24e84660, 0xafbf001c, + 0xafb20018, 0xafb10014, 0xafb00010, 0x9503000a, 0x8d060014, 0x00009021, + 0x309000ff, 0x00e08821, 0x24420001, 0x24a50020, 0x24630001, 0xaf820010, + 0xaf850018, 0xa503000a, 0x24c30020, 0x3c028000, 0x04c10007, 0xad030014, + 0x00621024, 0x14400005, 0x26224660, 0x8d020010, 0x24420001, 0xad020010, + 0x26224660, 0x9444000a, 0x94450018, 0x0010102b, 0x00a41826, 0x2c630001, + 0x00621825, 0x1060001c, 0x3c030006, 0x8f820010, 0x24120001, 0x00021140, + 0x00431025, 0xaf420030, 0x00000000, 0x00000000, 0x00000000, 0x27450400, + 0x8f420000, 0x30420010, 0x1040fffd, 0x26224660, 0x9444000a, 0x94430018, + 0xaf800010, 0xaf850018, 0x14830012, 0x26274660, 0x0e0010d2, 0x00000000, + 0x1600000e, 0x26274660, 0x0e001006, 0x00000000, 0x0a00108f, 0x26274660, + 0x00041c00, 0x00031c03, 0x00051400, 0x00021403, 0x00621823, 0x18600002, + 0x3c026000, 0xac400808, 0x26274660, 0x94e2000e, 0x94e3000c, 0x24420001, + 0xa4e2000e, 0x3042ffff, 0x50430001, 0xa4e0000e, 0x12000005, 0x3c02000a, + 0x94e2000a, 0xa74200a2, 0x0a0010cc, 0x02401021, 0x03421821, 0x94640006, + 0x94e2000a, 0x00441023, 0x00021400, 0x00021c03, 0x04610006, 0xa4e40006, + 0x0000000d, 0x00000000, 0x2400005a, 0x0a0010ae, 0x24020001, 0x8f820014, + 0x0062102b, 0x14400002, 0x00001021, 0x24020001, 0x304200ff, 0x1040001b, + 0x3c020800, 0x3c06000a, 0x24454660, 0x94a8000a, 0x8f870014, 0x03461021, + 0x94430006, 0x00402021, 0xa4a30006, 0x94820006, 0xa4a20006, 0x01021023, + 0x00021400, 0x00021403, 0x04410006, 0x0047102b, 0x0000000d, 0x00000000, + 0x2400005a, 0x0a0010c8, 0x24020001, 0x14400002, 0x00001021, 0x24020001, + 0x304200ff, 0x1440ffec, 0x03461021, 0x02401021, 0x8fbf001c, 0x8fb20018, + 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3c020800, 0x24454660, + 0x94a3001a, 0x8ca40024, 0x00403021, 0x000318c0, 0x00832021, 0xaf44003c, + 0x8ca20020, 0xaf420038, 0x3c020050, 0x34420008, 0xaf420030, 0x00000000, + 0x00000000, 0x00000000, 0x8f420000, 0x30420020, 0x1040fffd, 0x00000000, + 0x8f430400, 0x24c64660, 0xacc30010, 0x8f420404, 0x3c030020, 0xacc20014, + 0xaf430030, 0x94c40018, 0x94c3001c, 0x94c2001a, 0x94c5001e, 0x00832021, + 0x24420001, 0xa4c2001a, 0x3042ffff, 0x14450002, 0xa4c40018, 0xa4c0001a, + 0x03e00008, 0x00000000, 0x8f820010, 0x3c030006, 0x00021140, 0x00431025, + 0xaf420030, 0x00000000, 0x00000000, 0x00000000, 0x27430400, 0x8f420000, + 0x30420010, 0x1040fffd, 0x00000000, 0xaf800010, 0xaf830018, 0x03e00008, + 0x00000000, 0x27bdffe8, 0xafb00010, 0x3c100800, 0x26104660, 0x3c05000a, + 0x02002021, 0x03452821, 0xafbf0014, 0x0e001128, 0x2406000a, 0x96020002, + 0x9603001e, 0x3042000f, 0x24420003, 0x00431804, 0x24027fff, 0x0043102b, + 0xaf830014, 0x10400004, 0x00000000, 0x0000000d, 0x00000000, 0x24000043, + 0x0e0010d2, 0x00000000, 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, + 0x10c00007, 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000, + 0x14c0fffb, 0x24840004, 0x03e00008, 0x00000000, 0x0a001137, 0x00a01021, + 0xac860000, 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff, 0x03e00008, + 0x00000000, 0x3c036000, 0x8c642b7c, 0x3c036010, 0x8c6553fc, 0x00041582, + 0x00042302, 0x308403ff, 0x00052d82, 0x00441026, 0x0002102b, 0x0005282b, + 0x00451025, 0x1440000d, 0x3c020050, 0x34420004, 0xaf400038, 0xaf40003c, + 0xaf420030, 0x00000000, 0x00000000, 0x8f420000, 0x30420020, 0x1040fffd, + 0x3c020020, 0xaf420030, 0x0000000d, 0x03e00008, 0x00000000, 0x3c020050, + 0x34420004, 0xaf440038, 0xaf45003c, 0xaf420030, 0x00000000, 0x00000000, + 0x8f420000, 0x30420020, 0x1040fffd, 0x3c020020, 0xaf420030, 0x03e00008, + 0x00000000, 0x00000000 }; + +static u32 bnx2_COM_b06FwData[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_COM_b06FwRodata[(0x18/4) + 1] = { + 0x08002318, 0x08002348, 0x08002378, 0x080023a8, 0x080023d8, 0x00000000, + 0x00000000 }; + +static u32 bnx2_COM_b06FwBss[(0x88/4) + 1] = { 0x00000000 }; +static u32 bnx2_COM_b06FwSbss[(0x1c/4) + 1] = { 0x00000000 }; + +static int bnx2_RXP_b06FwReleaseMajor = 0x0; +static int bnx2_RXP_b06FwReleaseMinor = 0x0; +static int bnx2_RXP_b06FwReleaseFix = 0x0; +static u32 bnx2_RXP_b06FwStartAddr = 0x08000060; +static u32 bnx2_RXP_b06FwTextAddr = 0x08000000; +static int bnx2_RXP_b06FwTextLen = 0x20b8; +static u32 bnx2_RXP_b06FwDataAddr = 0x080020e0; +static int bnx2_RXP_b06FwDataLen = 0x0; +static u32 bnx2_RXP_b06FwRodataAddr = 0x00000000; +static int bnx2_RXP_b06FwRodataLen = 0x0; +static u32 bnx2_RXP_b06FwBssAddr = 0x08002100; +static int bnx2_RXP_b06FwBssLen = 0x239c; +static u32 bnx2_RXP_b06FwSbssAddr = 0x080020e0; +static int bnx2_RXP_b06FwSbssLen = 0x14; + +static u32 bnx2_RXP_b06FwText[(0x20b8/4) + 1] = { + 0x0a000018, 0x00000000, 0x00000000, 0x0000000d, 0x72787020, 0x302e362e, + 0x39000000, 0x00060903, 0x00000000, 0x0000000d, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x10000003, 0x00000000, 0x0000000d, 0x0000000d, 0x3c020800, + 0x244220e0, 0x3c030800, 0x2463449c, 0xac400000, 0x0043202b, 0x1480fffd, + 0x24420004, 0x3c1d0800, 0x37bd3ffc, 0x03a0f021, 0x3c100800, 0x26100060, + 0x3c1c0800, 0x279c20e0, 0x0e000329, 0x00000000, 0x0000000d, 0x8f870008, + 0x2ce20080, 0x10400018, 0x3c030800, 0x24633490, 0x8f460100, 0x00072140, + 0x00831021, 0xac460000, 0x8f450104, 0x00641021, 0xac450004, 0x8f460108, + 0xac460008, 0x8f45010c, 0xac45000c, 0x8f460114, 0xac460010, 0x8f450118, + 0xac450014, 0x8f460124, 0xac460018, 0x8f450128, 0x00641821, 0x24e20001, + 0xaf820008, 0xac65001c, 0x03e00008, 0x00000000, 0x00804021, 0x8f830000, + 0x24070001, 0x3c020001, 0x00621024, 0x10400037, 0x00603021, 0x9742010e, + 0x3c038000, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, + 0xa342018b, 0x8f840004, 0x24020080, 0x24030002, 0xaf420180, 0xa743018c, + 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000069, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x24020003, 0x30838000, 0x1060000d, 0xa7420188, 0x93420116, 0x304200fc, + 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600005, 0x00000000, + 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, + 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, + 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x30c21000, + 0x1040000f, 0x00000000, 0x9742010c, 0x3042fc00, 0x5440000b, 0x24070005, + 0x3c021000, 0x00c21024, 0x10400007, 0x3c030dff, 0x3463ffff, 0x3c020e00, + 0x00c21024, 0x0062182b, 0x54600001, 0x24070005, 0x8f82000c, 0x30434000, + 0x10600016, 0x00404821, 0x3c020f00, 0x00c21024, 0x14400012, 0x00000000, + 0x93420116, 0x34424000, 0x03421821, 0x94650002, 0x2ca21389, 0x1040000b, + 0x3c020800, 0x24422100, 0x00051942, 0x00031880, 0x00621821, 0x30a5001f, + 0x8c640000, 0x24020001, 0x00a21004, 0x00822024, 0x01044025, 0x11000037, + 0x3c021000, 0x9742010e, 0x34e60002, 0x3c038000, 0x24420004, 0x3045ffff, + 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x8f840004, + 0x24020180, 0x24030002, 0xaf420180, 0xa743018c, 0x10800005, 0xa745018e, + 0x9743011c, 0x9742011e, 0x0a0000cd, 0x00021400, 0x9743011e, 0x9742011c, + 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, 0x30828000, 0x1040000c, + 0xa7460188, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, + 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c, + 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, + 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x03e00008, + 0x00001021, 0x00c21024, 0x104000ba, 0x3c020800, 0x8c430030, 0x1060003e, + 0x31224000, 0x1040003c, 0x3c030f00, 0x00c31824, 0x3c020100, 0x0043102b, + 0x14400038, 0x3c030800, 0x9742010e, 0x34e60002, 0x3c038000, 0x24420004, + 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, + 0x8f840004, 0x24020080, 0x24030002, 0xaf420180, 0xa743018c, 0x10800005, + 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000110, 0x00021400, 0x9743011e, + 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, 0x30828000, + 0x1040000c, 0xa7460188, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, + 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024, + 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, + 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, + 0x03e00008, 0x00001021, 0x3c030800, 0x8c620024, 0x30420008, 0x1040003d, + 0x34e80002, 0x3c020f00, 0x00c21024, 0x5440003a, 0x3107ffff, 0x9742010c, + 0x30420200, 0x50400036, 0x3107ffff, 0x9742010e, 0x30e6fffb, 0x3c038000, + 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, + 0xa342018b, 0x8f840004, 0x24020180, 0x24030002, 0xaf420180, 0xa743018c, + 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000153, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x30828000, 0x1040000c, 0xa7460188, 0x93420116, 0x304200fc, 0x005a1021, + 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, + 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, + 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, + 0xaf4201b8, 0x3107ffff, 0x8f820000, 0x3c068000, 0x9743010e, 0x00021442, + 0x30440780, 0x24630004, 0x3065ffff, 0x8f4201b8, 0x00461024, 0x1440fffd, + 0x24020003, 0xa342018b, 0x8f830004, 0x24020002, 0xaf440180, 0xa742018c, + 0x10600005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000189, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021, + 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, + 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, + 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, + 0xaf4201b8, 0x03e00008, 0x00001021, 0x8f424000, 0x30420100, 0x104000ef, + 0x3c020800, 0x8c440024, 0x24030001, 0x14830036, 0x00404021, 0x9742010e, + 0x34e50002, 0x3c038000, 0x24420004, 0x3044ffff, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x24020003, 0xa342018b, 0x8f830004, 0x24020002, 0xaf400180, + 0xa742018c, 0x10600005, 0xa744018e, 0x9743011c, 0x9742011e, 0x0a0001c6, + 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, + 0x8f84000c, 0x30828000, 0x1040000c, 0xa7450188, 0x93420116, 0x304200fc, + 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, + 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, + 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, + 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x30820001, 0x10400035, + 0x30e90004, 0x9742010e, 0x30e6fffb, 0x3c038000, 0x24420004, 0x3044ffff, + 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x8f830004, + 0x24020002, 0xaf400180, 0xa742018c, 0x10600005, 0xa744018e, 0x9743011c, + 0x9742011e, 0x0a0001fe, 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, + 0x00621825, 0xaf4301a8, 0x8f84000c, 0x30828000, 0x1040000c, 0xa7470188, + 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, + 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e, + 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, + 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x30c7ffff, 0x8d020024, + 0x30420004, 0x10400037, 0x8d020024, 0x9742010e, 0x30e6fffb, 0x3c038000, + 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, + 0xa342018b, 0x8f840004, 0x24020100, 0x24030002, 0xaf420180, 0xa743018c, + 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000237, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021, + 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, + 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, + 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, + 0xaf4201b8, 0x30c7ffff, 0x8d020024, 0x30420008, 0x10400034, 0x00000000, + 0x9742010e, 0x3c038000, 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x24020003, 0xa342018b, 0x8f840004, 0x24020180, 0x24030002, + 0xaf420180, 0xa743018c, 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e, + 0x0a00026f, 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, + 0xaf4301a8, 0x8f84000c, 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, + 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, + 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, + 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, + 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x15200046, 0x00001021, 0x3c038000, + 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002, 0x24032000, 0xa342018b, + 0xa7430188, 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x3c030800, + 0x8c620024, 0x30420001, 0x10400035, 0x00001021, 0x9742010e, 0x34e50002, + 0x3c038000, 0x24420004, 0x3044ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, + 0x24020003, 0xa342018b, 0x8f830004, 0x24020002, 0xaf400180, 0xa742018c, + 0x10600005, 0xa744018e, 0x9743011c, 0x9742011e, 0x0a0002b5, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x30828000, 0x1040000c, 0xa7450188, 0x93420116, 0x304200fc, 0x005a1021, + 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, + 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, + 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, + 0xaf4201b8, 0x00001021, 0x03e00008, 0x00000000, 0x27bdffe0, 0xafbf0018, + 0xafb10014, 0xafb00010, 0x8f420140, 0xaf420020, 0x8f430148, 0x3c027000, + 0x00621824, 0x3c024000, 0x1062000c, 0x0043102b, 0x14400006, 0x3c025000, + 0x3c023000, 0x1062000b, 0x3c024000, 0x0a00031f, 0x00000000, 0x10620034, + 0x3c024000, 0x0a00031f, 0x00000000, 0x0e00067c, 0x00000000, 0x0a00031f, + 0x3c024000, 0x8f420148, 0x24030002, 0x3044ffff, 0x00021402, 0x305000ff, + 0x1203000c, 0x27510180, 0x2a020003, 0x10400005, 0x24020003, 0x0600001d, + 0x36053000, 0x0a00030a, 0x3c038000, 0x12020007, 0x00000000, 0x0a000317, + 0x00000000, 0x0e000423, 0x00000000, 0x0a000308, 0x00402021, 0x0e000435, + 0x00000000, 0x00402021, 0x36053000, 0x3c038000, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x24020002, 0xa6250008, 0xa222000b, 0xa6240010, 0x8f420144, + 0x3c031000, 0xae220024, 0xaf4301b8, 0x0a00031f, 0x3c024000, 0x0000000d, + 0x00000000, 0x240001c3, 0x0a00031f, 0x3c024000, 0x0e0007f7, 0x00000000, + 0x3c024000, 0xaf420178, 0x00000000, 0x8fbf0018, 0x8fb10014, 0x8fb00010, + 0x03e00008, 0x27bd0020, 0x24020800, 0x03e00008, 0xaf4201b8, 0x27bdffe8, + 0x3c04600c, 0xafbf0014, 0xafb00010, 0x8c825000, 0x3c1a8000, 0x2403ff7f, + 0x3c106000, 0x00431024, 0x3442380c, 0x24030003, 0xac825000, 0x3c040008, + 0xaf430008, 0x8e020808, 0x3c030800, 0xac600020, 0x3042fff0, 0x2c420001, + 0xaf820004, 0x0e000819, 0x0344d825, 0x0e000781, 0x00000000, 0x3c020400, + 0x3442000c, 0x3c03ffff, 0x34630806, 0xae021948, 0xae03194c, 0x8e021980, + 0x34420200, 0xae021980, 0x8f500000, 0x32020003, 0x1040fffd, 0x32020001, + 0x10400004, 0x32020002, 0x0e0003bd, 0x00000000, 0x32020002, 0x1040fff6, + 0x00000000, 0x0e0002d4, 0x00000000, 0x0a00034a, 0x00000000, 0x27bdffe8, + 0x3c04600c, 0xafbf0014, 0xafb00010, 0x8c825000, 0x3c1a8000, 0x2403ff7f, + 0x3c106000, 0x00431024, 0x3442380c, 0x24030003, 0xac825000, 0x3c040008, + 0xaf430008, 0x8e020808, 0x3c030800, 0xac600020, 0x3042fff0, 0x2c420001, + 0xaf820004, 0x0e000819, 0x0344d825, 0x0e000781, 0x00000000, 0x3c020400, + 0x3442000c, 0x3c03ffff, 0x34630806, 0xae021948, 0xae03194c, 0x8e021980, + 0x8fbf0014, 0x34420200, 0xae021980, 0x8fb00010, 0x03e00008, 0x27bd0018, + 0x30a5ffff, 0x30c6ffff, 0x30e7ffff, 0x3c038000, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x24020003, 0xa342018b, 0x8f830004, 0xaf440180, 0xa745018c, + 0x10600005, 0xa746018e, 0x9743011c, 0x9742011e, 0x0a000393, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021, + 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, + 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, + 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, + 0xaf4201b8, 0x03e00008, 0x00000000, 0x3c038000, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x24020002, 0x24032000, 0xa342018b, 0xa7430188, 0x3c021000, + 0xaf4201b8, 0x03e00008, 0x00000000, 0x27bdffe8, 0xafbf0010, 0x8f460128, + 0xaf460020, 0x8f420104, 0x8f450100, 0x24030800, 0x3c040010, 0xaf820000, + 0x00441024, 0xaf85000c, 0xaf4301b8, 0x14400005, 0x3c02001f, 0x3c030800, + 0x8c620020, 0x0a0003d5, 0x00002021, 0x3442ff00, 0x14c20009, 0x2402bfff, + 0x3c030800, 0x8c620020, 0x24040001, 0x24420001, 0x0e00004c, 0xac620020, + 0x0a0003e4, 0x00000000, 0x00a21024, 0x14400006, 0x00000000, 0xaf400048, + 0x0e000448, 0xaf400040, 0x0a0003e4, 0x00000000, 0x0e000783, 0x00000000, + 0x10400005, 0x3c024000, 0x8f430124, 0x3c026020, 0xac430014, 0x3c024000, + 0xaf420138, 0x00000000, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe0, + 0xafbf0018, 0xafb10014, 0xafb00010, 0x8f420148, 0x24030002, 0x3044ffff, + 0x00021402, 0x305000ff, 0x1203000c, 0x27510180, 0x2a020003, 0x10400005, + 0x24020003, 0x0600001d, 0x36053000, 0x0a00040e, 0x3c038000, 0x12020007, + 0x00000000, 0x0a00041b, 0x00000000, 0x0e000423, 0x00000000, 0x0a00040c, + 0x00402021, 0x0e000435, 0x00000000, 0x00402021, 0x36053000, 0x3c038000, + 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002, 0xa6250008, 0xa222000b, + 0xa6240010, 0x8f420144, 0x3c031000, 0xae220024, 0xaf4301b8, 0x0a00041f, + 0x8fbf0018, 0x0000000d, 0x00000000, 0x240001c3, 0x8fbf0018, 0x8fb10014, + 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3084ffff, 0x2c821389, 0x1040000d, + 0x00001021, 0x3c030800, 0x24632100, 0x00042942, 0x00052880, 0x00a32821, + 0x3086001f, 0x8ca40000, 0x24030001, 0x00c31804, 0x00832025, 0x03e00008, + 0xaca40000, 0x03e00008, 0x24020091, 0x3084ffff, 0x2c821389, 0x1040000e, + 0x00001021, 0x3c030800, 0x24632100, 0x00042942, 0x00052880, 0x00a32821, + 0x3086001f, 0x24030001, 0x8ca40000, 0x00c31804, 0x00031827, 0x00832024, + 0x03e00008, 0xaca40000, 0x03e00008, 0x24020091, 0x27bdffb0, 0x3c026000, + 0xafbf0048, 0x8c434448, 0xaf630140, 0x93620005, 0x30420001, 0x14400005, + 0x00000000, 0x0e0007ed, 0x00000000, 0x0a00067a, 0x8fbf0048, 0x93420116, + 0x93430112, 0x8f430104, 0x3c040020, 0x34424000, 0x00641824, 0x1060000d, + 0x03426021, 0x8f430128, 0x27420180, 0xac430000, 0x8f650040, 0x24040008, + 0x240340c1, 0xa4430008, 0x24030002, 0xa043000b, 0x3c031000, 0x0a000563, + 0xa044000a, 0x8f420104, 0x3c030040, 0x00431024, 0x10400007, 0x00000000, + 0x8f430128, 0x27420180, 0xac430000, 0x8f650040, 0x0a00055c, 0x24040010, + 0xaf400048, 0xaf400054, 0xaf400040, 0x8f630048, 0x8f620040, 0x00624823, + 0x05210004, 0x00000000, 0x0000000d, 0x00000000, 0x24000132, 0x9742011a, + 0x3046ffff, 0x10c00004, 0x8d880004, 0x01061021, 0x0a000487, 0x2445ffff, + 0x01002821, 0x918a000d, 0xa7a00020, 0xafa00028, 0x9364003f, 0x3c026000, + 0x8c434448, 0x308700ff, 0x31420004, 0x10400033, 0xaf630144, 0x24090012, + 0x14e90006, 0x3c040800, 0x8c830028, 0x24020001, 0x24630001, 0x0a00054e, + 0xac830028, 0x8f620044, 0x15020012, 0x97a20020, 0x27a60010, 0x27450180, + 0x3442001a, 0xa7a20020, 0x8f630040, 0x3c048000, 0x24020020, 0xa3a70022, + 0xa3a90023, 0xa3a2001a, 0xafa30028, 0x8f4201b8, 0x00441024, 0x1440fffd, + 0x00000000, 0x0a000533, 0x00000000, 0x8f620044, 0x01021023, 0x0440009e, + 0x24020001, 0x8f620048, 0x01021023, 0x0441009a, 0x24020001, 0x97a20020, + 0x27a60010, 0x34420001, 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000, + 0xafa30028, 0x8f4201b8, 0x00441024, 0x1440fffd, 0x00000000, 0x0a000533, + 0x00000000, 0x3c026000, 0x8c424448, 0xaf620148, 0x8f630040, 0x00685823, + 0x19600013, 0x00cb102a, 0x54400007, 0x314a00fe, 0x5566000c, 0x010b4021, + 0x31420001, 0x54400009, 0x010b4021, 0x314a00fe, 0x24020001, 0xa7a20020, + 0x8f630040, 0x00c05821, 0x00003021, 0x0a0004dd, 0xafa30028, 0x00cb1023, + 0x0a0004dd, 0x3046ffff, 0x00005821, 0x8f620048, 0x2442ffff, 0x00a21823, + 0x18600019, 0x0066102a, 0x14400013, 0x24020001, 0xa7a20020, 0x8f630040, + 0xafa30028, 0x8f620040, 0x55020005, 0x27a60010, 0x55200003, 0x27a60010, + 0x0a0004f6, 0x00c01821, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x00000000, 0x0a000533, 0x00000000, 0x8f650048, 0x00c31023, + 0x3046ffff, 0x314a00f6, 0x3c046000, 0x8c824448, 0x31430002, 0x1060001e, + 0xaf62014c, 0x8f620044, 0x1502000e, 0x97a20020, 0x27a60010, 0x34420200, + 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000, 0xafa30028, 0x8f4201b8, + 0x00441024, 0x1440fffd, 0x00000000, 0x0a000533, 0x00000000, 0x27a60010, + 0x34420001, 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000, 0xafa30028, + 0x8f4201b8, 0x00441024, 0x1440fffd, 0x00000000, 0x0a000533, 0x00000000, + 0x3c026000, 0x8c424448, 0x31430010, 0xaf620150, 0x54600003, 0x8d890008, + 0x0a00054e, 0x24020001, 0x8f630054, 0x2522ffff, 0x00431023, 0x1840002a, + 0x24020001, 0x27a60010, 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000, + 0xafa30028, 0x8f4201b8, 0x00441024, 0x1440fffd, 0x00000000, 0x8f420128, + 0xaca20000, 0x8cc30018, 0x240240c1, 0xa4a20008, 0xaca30018, 0x90c4000a, + 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x94c20010, 0xa4a20010, 0x90c30012, + 0xa0a30012, 0x90c20013, 0xa0a20013, 0x8cc30014, 0xaca30014, 0x8cc20024, + 0xaca20024, 0x8cc30028, 0xaca30028, 0x8cc4002c, 0x24020001, 0x3c031000, + 0xaca4002c, 0xaf4301b8, 0xaf400044, 0xaf400050, 0x0a00067a, 0x8fbf0048, + 0x3c026000, 0x8c424448, 0x31430020, 0x10600019, 0xaf620154, 0x8f430128, + 0x27420180, 0xac430000, 0x8f650040, 0x24040004, 0x240340c1, 0xa4430008, + 0x24030002, 0xa044000a, 0x24040008, 0xa043000b, 0x3c031000, 0xa4440010, + 0xa0400012, 0xa0400013, 0xac400014, 0xac400024, 0xac400028, 0xac40002c, + 0xac450018, 0x0e0007ed, 0xaf4301b8, 0x0a00067a, 0x8fbf0048, 0x8f430104, + 0x8c824448, 0x38e3000a, 0x2c630001, 0xaf620158, 0x38e2000c, 0x2c420001, + 0x00621825, 0x14600003, 0x2402000e, 0x14e2002a, 0x00000000, 0x50c00008, + 0x9584000e, 0x10c00004, 0xa7a60040, 0x01061021, 0x0a000583, 0x2445ffff, + 0x01002821, 0x9584000e, 0x93630035, 0x8f62004c, 0x00642004, 0x00892021, + 0x00821023, 0x1840001f, 0x3c026000, 0x8f620018, 0x01021023, 0x1c40000f, + 0x97a20020, 0x8f620018, 0x15020018, 0x3c026000, 0x8f62001c, 0x01221023, + 0x1c400008, 0x97a20020, 0x8f62001c, 0x15220011, 0x3c026000, 0x8f620058, + 0x00821023, 0x1840000c, 0x97a20020, 0xafa50028, 0xafa80034, 0xafa90038, + 0xafa4003c, 0x34420020, 0x0a0005a8, 0xa7a20020, 0x8f680040, 0x00003021, + 0x8f640058, 0x01002821, 0x3c026000, 0x8c434448, 0xaf63015c, 0x8f62004c, + 0x01221023, 0x18400009, 0x00000000, 0x8f620054, 0x01221023, 0x1c400005, + 0x97a20020, 0xafa50028, 0xafa90024, 0x0a0005c3, 0x34420040, 0x9742011a, + 0x1440000c, 0x24020014, 0x8f620058, 0x14820009, 0x24020014, 0x8f63004c, + 0x8f620054, 0x10620004, 0x97a20020, 0xafa50028, 0x34420080, 0xa7a20020, + 0x24020014, 0x10e2000a, 0x28e20015, 0x10400005, 0x2402000c, 0x10e20006, + 0x3c026000, 0x0a000600, 0x00000000, 0x24020016, 0x14e20031, 0x3c026000, + 0x8f620054, 0x24420001, 0x1522002d, 0x3c026000, 0x24020014, 0x10e2001e, + 0x28e20015, 0x10400005, 0x2402000c, 0x10e20008, 0x3c026000, 0x0a000600, + 0x00000000, 0x24020016, 0x10e2000c, 0x97a20020, 0x0a000600, 0x3c026000, + 0x97a30020, 0x2402000e, 0xafa50028, 0xa3a70022, 0xa3a20023, 0xafa90024, + 0x34630054, 0x0a0005ff, 0xa7a30020, 0x24030010, 0x24040002, 0xafa50028, + 0xa3a70022, 0xa3a30023, 0xa3a4001a, 0xafa90024, 0x0a0005fe, 0x3442005d, + 0x97a20020, 0x24030012, 0x24040002, 0xafa50028, 0xa3a70022, 0xa3a30023, + 0xa3a4001a, 0xafa90024, 0x3042fffe, 0x3442005c, 0xa7a20020, 0x3c026000, + 0x8c434448, 0x31420001, 0xaf630160, 0x1040002c, 0x2402000c, 0x10e20014, + 0x28e2000d, 0x10400005, 0x2402000a, 0x10e20008, 0x97a20020, 0x0a000631, + 0x3c026000, 0x2402000e, 0x10e20018, 0x3c026000, 0x0a000631, 0x00000000, + 0x24030008, 0x24040002, 0xafa50028, 0xa3a70022, 0xa3a30023, 0xa3a4001a, + 0x0a00062f, 0x34420013, 0x97a30020, 0x30620004, 0x1440000b, 0x97a20020, + 0x3462001b, 0xa7a20020, 0x24020016, 0x24030002, 0xafa50028, 0xa3a70022, + 0xa3a20023, 0x0a000630, 0xa3a3001a, 0x97a20020, 0x24030010, 0x24040002, + 0xafa50028, 0xa3a70022, 0xa3a30023, 0xa3a4001a, 0x3442001b, 0xa7a20020, + 0x3c026000, 0x8c434448, 0x31420009, 0x0002102b, 0x00021023, 0x30420007, + 0x34440003, 0xaf630164, 0x10c00016, 0x24030800, 0x8f820010, 0x27450180, + 0x24420001, 0xaf820010, 0x24020004, 0xaf4301b8, 0xa4a40008, 0xa0a2000b, + 0x93440120, 0x3c031000, 0xa4a6000e, 0xaca90024, 0xaca80028, 0x008b2021, + 0xa4a4000c, 0xaf4301b8, 0x97a20020, 0x00003021, 0x3042ffbf, 0x0a000650, + 0xa7a20020, 0x24060001, 0x3c026000, 0x8c434448, 0xaf630168, 0x97a20020, + 0x10400020, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, + 0x00000000, 0x8f420128, 0xaca20000, 0x8fa30028, 0x240240c1, 0xa4a20008, + 0xaca30018, 0x93a4001a, 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x97a20020, + 0xa4a20010, 0x93a30022, 0xa0a30012, 0x93a20023, 0xa0a20013, 0x8fa30024, + 0xaca30014, 0x8fa20034, 0xaca20024, 0x8fa30038, 0xaca30028, 0x8fa2003c, + 0x3c031000, 0xaca2002c, 0xaf4301b8, 0x3c026000, 0x8c434448, 0x00c01021, + 0xaf63016c, 0x8fbf0048, 0x03e00008, 0x27bd0050, 0x8f460140, 0x8f470148, + 0x3c028000, 0x00e24024, 0x00072c02, 0x30a300ff, 0x2402000b, 0x1062008f, + 0x27440180, 0x2862000c, 0x10400011, 0x24020006, 0x1062005a, 0x28620007, + 0x10400007, 0x24020008, 0x10600024, 0x24020001, 0x10620037, 0x00000000, + 0x0a00077e, 0x00000000, 0x106200a9, 0x24020009, 0x106200bb, 0x00071c02, + 0x0a00077e, 0x00000000, 0x2402001b, 0x106200c7, 0x2862001c, 0x10400007, + 0x2402000e, 0x106200b1, 0x24020019, 0x106200c2, 0x00071c02, 0x0a00077e, + 0x00000000, 0x24020080, 0x10620060, 0x28620081, 0x10400005, 0x2402001c, + 0x10620094, 0x00071c02, 0x0a00077e, 0x00000000, 0x240200c2, 0x106200c5, + 0x00a01821, 0x0a00077e, 0x00000000, 0x00a01821, 0x3c058000, 0x8f4201b8, + 0x00451024, 0x1440fffd, 0x24020001, 0xa4830008, 0x24030002, 0xac860000, + 0xac800004, 0xa082000a, 0xa083000b, 0xa4870010, 0x8f430144, 0x3c021000, + 0xac800028, 0xac830024, 0x3c036000, 0xaf4201b8, 0x03e00008, 0xac600808, + 0x11000009, 0x00a01821, 0x3c020800, 0x24030002, 0xa0434490, 0x24424490, + 0xac460008, 0x8f430144, 0x03e00008, 0xac430004, 0x3c058000, 0x8f4201b8, + 0x00451024, 0x1440fffd, 0x24020002, 0xac800000, 0xac860004, 0xa4830008, + 0xa082000a, 0xa082000b, 0xa4870010, 0xac800024, 0x8f420144, 0x3c031000, + 0xac820028, 0x3c026000, 0xaf4301b8, 0x03e00008, 0xac400808, 0x00a01821, + 0x3c080800, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x00000000, + 0xac860000, 0x91024490, 0x00002821, 0x10400002, 0x25064490, 0x8cc50008, + 0xac850004, 0xa4830008, 0x91034490, 0x24020002, 0xa082000b, 0xa4870010, + 0x34630001, 0xa083000a, 0x8f420144, 0xac820024, 0x91034490, 0x10600002, + 0x00001021, 0x8cc20004, 0xac820028, 0x3c021000, 0xaf4201b8, 0x3c026000, + 0xa1004490, 0x03e00008, 0xac400808, 0x00a01821, 0x3c058000, 0x8f4201b8, + 0x00451024, 0x1440fffd, 0x24020002, 0xa082000b, 0xa4830008, 0xa4870010, + 0x8f420144, 0x3c031000, 0xa4820012, 0x03e00008, 0xaf4301b8, 0x30e2ffff, + 0x14400028, 0x00071c02, 0x93620005, 0x30420004, 0x14400020, 0x3c029000, + 0x34420001, 0x00c21025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, + 0x1440fffd, 0x00000000, 0x93620005, 0x3c038000, 0x34630001, 0x00c31825, + 0x34420004, 0xa3620005, 0xaf430020, 0x93620005, 0x30420004, 0x14400003, + 0x3c038000, 0x0000000d, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, + 0x24020005, 0x3c031000, 0xac860000, 0xa082000b, 0xaf4301b8, 0x0a00073d, + 0x00071c02, 0x0000000d, 0x03e00008, 0x00000000, 0x00071c02, 0x3c058000, + 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020001, 0xa4830008, 0x24030002, + 0xac860000, 0xac800004, 0xa082000a, 0xa083000b, 0xa4870010, 0x8f430144, + 0x3c021000, 0xac800028, 0xac830024, 0x03e00008, 0xaf4201b8, 0x00071c02, + 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020002, 0xac800000, + 0xac860004, 0xa4830008, 0xa082000a, 0xa082000b, 0xa4870010, 0xac800024, + 0x8f420144, 0x3c031000, 0xac820028, 0x03e00008, 0xaf4301b8, 0x00071c02, + 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020001, 0xa4830008, + 0x24030002, 0xa082000a, 0x3c021000, 0xac860000, 0xac800004, 0xa083000b, + 0xa4870010, 0xac800024, 0xac800028, 0x03e00008, 0xaf4201b8, 0x3c058000, + 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020002, 0xac860000, 0xac800004, + 0xa4830008, 0xa080000a, 0x0a000748, 0xa082000b, 0x0000000d, 0x03e00008, + 0x00000000, 0x03e00008, 0x00000000, 0x8f420100, 0x3042003e, 0x14400011, + 0x24020001, 0xaf400048, 0x8f420100, 0x304207c0, 0x10400005, 0x00000000, + 0xaf40004c, 0xaf400050, 0x03e00008, 0x24020001, 0xaf400054, 0xaf400040, + 0x8f420100, 0x30423800, 0x54400001, 0xaf400044, 0x24020001, 0x03e00008, + 0x00000000, 0x3c029000, 0x34420001, 0x00822025, 0xaf440020, 0x3c038000, + 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x03e00008, 0x00000000, + 0x3c028000, 0x34420001, 0x00822025, 0x03e00008, 0xaf440020, 0x8f430128, + 0x27420180, 0xac430000, 0x8f650040, 0x240340c1, 0xa4430008, 0x24030002, + 0xa044000a, 0x24040008, 0xa043000b, 0x3c031000, 0xa4440010, 0xa0400012, + 0xa0400013, 0xac400014, 0xac400024, 0xac400028, 0xac40002c, 0xac450018, + 0x03e00008, 0xaf4301b8, 0x24020001, 0xacc40000, 0x03e00008, 0xa4e50000, + 0x03e00008, 0x24020001, 0x24020001, 0xaf400044, 0x03e00008, 0xaf400050, + 0x00803021, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, + 0x00000000, 0x8f420128, 0xaca20000, 0x8cc30018, 0x240240c1, 0xa4a20008, + 0xaca30018, 0x90c4000a, 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x94c20010, + 0xa4a20010, 0x90c30012, 0xa0a30012, 0x90c20013, 0xa0a20013, 0x8cc30014, + 0xaca30014, 0x8cc20024, 0xaca20024, 0x8cc30028, 0xaca30028, 0x8cc2002c, + 0x3c031000, 0xaca2002c, 0x24020001, 0xaf4301b8, 0xaf400044, 0x03e00008, + 0xaf400050, 0x27bdffe8, 0xafbf0010, 0x0e000326, 0x00000000, 0x00002021, + 0x0e00004c, 0xaf400180, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x8f460148, + 0x27450180, 0x3c038000, 0x00061402, 0x304700ff, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x00000000, 0x8f440140, 0x00061202, 0x304200ff, 0x00061c02, + 0xaca20004, 0x24020002, 0xa4a30008, 0x30c300ff, 0xa0a2000b, 0xaca30024, + 0x10e0000a, 0xaca40000, 0x28e20004, 0x14400005, 0x24020001, 0x24020005, + 0x54e20005, 0xa0a0000a, 0x24020001, 0x0a000816, 0xa0a2000a, 0xa0a0000a, + 0x3c021000, 0x03e00008, 0xaf4201b8, 0x03e00008, 0x00001021, 0x10c00007, + 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000, 0x14c0fffb, + 0x24840004, 0x03e00008, 0x00000000, 0x0a00082a, 0x00a01021, 0xac860000, + 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff, 0x03e00008, 0x00000000, + 0x00000000 }; + +static u32 bnx2_RXP_b06FwData[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_RXP_b06FwRodata[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_RXP_b06FwBss[(0x239c/4) + 1] = { 0x00000000 }; +static u32 bnx2_RXP_b06FwSbss[(0x14/4) + 1] = { 0x00000000 }; + +static u32 bnx2_rv2p_proc1[] = { + 0x00000008, 0xac000001, 0x0000000c, 0x2f800001, 0x00000010, 0x213f0004, + 0x00000010, 0x20bf002c, 0x00000010, 0x203f0143, 0x00000018, 0x8000fffd, + 0x00000010, 0xb1b8b017, 0x0000000b, 0x2fdf0002, 0x00000000, 0x03d80000, + 0x00000000, 0x2c380000, 0x00000008, 0x2c800000, 0x00000008, 0x2d000000, + 0x00000010, 0x91d40000, 0x00000008, 0x2d800108, 0x00000008, 0x02000002, + 0x00000010, 0x91de0000, 0x0000000f, 0x42e0001c, 0x00000010, 0x91840a08, + 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, 0x00000008, 0x2d800150, + 0x00000000, 0x00000000, 0x00000010, 0x91de0000, 0x00000010, 0x2c620002, + 0x00000018, 0x80000012, 0x0000000b, 0x2fdf0002, 0x0000000c, 0x1f800002, + 0x00000000, 0x2c070000, 0x00000018, 0x8000ffe6, 0x00000008, 0x02000002, + 0x0000000f, 0x42e0001c, 0x00000010, 0x91840a08, 0x00000008, 0x2c8000b0, + 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800108, + 0x00000000, 0x00000000, 0x00000010, 0x91de0000, 0x00000018, 0x80000004, + 0x0000000c, 0x1f800002, 0x00000000, 0x00000000, 0x00000018, 0x8000ffd9, + 0x0000000c, 0x29800002, 0x0000000c, 0x1f800002, 0x00000000, 0x2adf0000, + 0x00000008, 0x2a000005, 0x00000018, 0x8000ffd4, 0x00000008, 0x02240030, + 0x00000018, 0x00040000, 0x00000018, 0x80000015, 0x00000018, 0x80000017, + 0x00000018, 0x8000001b, 0x00000018, 0x8000004c, 0x00000018, 0x8000008c, + 0x00000018, 0x8000000f, 0x00000018, 0x8000000e, 0x00000018, 0x8000000d, + 0x00000018, 0x8000000c, 0x00000018, 0x800000c2, 0x00000018, 0x8000000a, + 0x00000018, 0x80000009, 0x00000018, 0x80000008, 0x00000018, 0x800000fd, + 0x00000018, 0x80000006, 0x00000018, 0x80000005, 0x00000018, 0x800000ff, + 0x00000018, 0x80000104, 0x00000018, 0x80000002, 0x00000018, 0x80000098, + 0x00000018, 0x80000000, 0x0000000c, 0x1f800001, 0x00000000, 0x00000000, + 0x00000018, 0x8000ffba, 0x00000010, 0x91d40000, 0x0000000c, 0x29800001, + 0x0000000c, 0x1f800001, 0x00000008, 0x2a000002, 0x00000018, 0x8000ffb5, + 0x00000010, 0xb1a0b012, 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c200000, + 0x00000008, 0x2c800000, 0x00000008, 0x2d000000, 0x00000010, 0x91d40000, + 0x00000008, 0x2d80011c, 0x00000000, 0x00000000, 0x00000010, 0x91de0000, + 0x0000000f, 0x47600008, 0x0000000f, 0x060e0001, 0x00000010, 0x001f0000, + 0x00000000, 0x0f580000, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, + 0x00000000, 0x0b660000, 0x00000000, 0x0d610000, 0x00000018, 0x80000013, + 0x0000000f, 0x47600008, 0x0000000b, 0x2fdf0002, 0x00000008, 0x2c800000, + 0x00000008, 0x2d000000, 0x00000010, 0x91d40000, 0x00000008, 0x2d80011c, + 0x0000000f, 0x060e0001, 0x00000010, 0x001f0000, 0x00000000, 0x0f580000, + 0x00000010, 0x91de0000, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, + 0x00000000, 0x0b660000, 0x00000000, 0x0d610000, 0x00000000, 0x02620000, + 0x0000000b, 0x2fdf0002, 0x00000000, 0x309a0000, 0x00000000, 0x31040000, + 0x00000000, 0x0c961800, 0x00000009, 0x0c99ffff, 0x00000004, 0xcc993400, + 0x00000010, 0xb1963202, 0x00000008, 0x0f800000, 0x0000000c, 0x29800001, + 0x00000010, 0x00220002, 0x0000000c, 0x29520001, 0x0000000c, 0x29520000, + 0x00000008, 0x22000001, 0x0000000c, 0x1f800001, 0x00000000, 0x2adf0000, + 0x00000008, 0x2a000003, 0x00000018, 0x8000ff83, 0x00000010, 0xb1a0b01d, + 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c200000, 0x00000008, 0x2c8000b0, + 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800150, + 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000008, 0x2c800000, + 0x00000008, 0x2d000000, 0x00000008, 0x2d800108, 0x00000000, 0x00000000, + 0x00000010, 0x91de0000, 0x0000000f, 0x47600008, 0x00000000, 0x060e0000, + 0x00000010, 0x001f0000, 0x00000000, 0x0f580000, 0x00000010, 0x91de0000, + 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, 0x00000000, 0x0b670000, + 0x00000000, 0x0d620000, 0x00000000, 0x0ce71800, 0x00000009, 0x0c99ffff, + 0x00000004, 0xcc993400, 0x00000010, 0xb1963220, 0x00000008, 0x0f800000, + 0x00000018, 0x8000001e, 0x0000000f, 0x47600008, 0x0000000b, 0x2fdf0002, + 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, + 0x00000008, 0x2d80012c, 0x0000000f, 0x060e0001, 0x00000010, 0x001f0000, + 0x00000000, 0x0f580000, 0x00000010, 0x91de0000, 0x00000000, 0x0a640000, + 0x00000000, 0x0ae50000, 0x00000000, 0x0b670000, 0x00000000, 0x0d620000, + 0x00000000, 0x02630000, 0x0000000f, 0x47620010, 0x00000000, 0x0ce71800, + 0x0000000b, 0x2fdf0002, 0x00000000, 0x311a0000, 0x00000000, 0x31840000, + 0x0000000b, 0xc20000ff, 0x00000002, 0x42040000, 0x00000001, 0x31620800, + 0x0000000f, 0x020e0010, 0x00000002, 0x31620800, 0x00000009, 0x0c99ffff, + 0x00000004, 0xcc993400, 0x00000010, 0xb1963202, 0x00000008, 0x0f800000, + 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x0000000c, 0x61420006, + 0x00000008, 0x22000008, 0x00000000, 0x2adf0000, 0x00000008, 0x2a000004, + 0x00000018, 0x8000ff42, 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, + 0x00000010, 0x91a0b008, 0x00000010, 0x91d40000, 0x0000000c, 0x31620018, + 0x00000008, 0x2d800001, 0x00000000, 0x00000000, 0x00000010, 0x91de0000, + 0x00000008, 0xac000001, 0x00000018, 0x8000000e, 0x00000000, 0x0380b000, + 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c004000, 0x00000010, 0x91d40000, + 0x00000008, 0x2d800101, 0x00000000, 0x00000000, 0x00000010, 0x91de0000, + 0x0000000c, 0x31620018, 0x00000008, 0x2d800001, 0x00000000, 0x00000000, + 0x00000010, 0x91de0000, 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c000e00, + 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x00000008, 0x2a000007, + 0x00000018, 0x8000ff27, 0x00000010, 0xb1a0b016, 0x0000000b, 0x2fdf0002, + 0x00000000, 0x03d80000, 0x00000000, 0x2c200000, 0x00000008, 0x2c8000b0, + 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800150, + 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000008, 0x2c800000, + 0x00000008, 0x2d000000, 0x00000008, 0x2d800108, 0x00000008, 0x07000001, + 0x00000010, 0xb5de1c00, 0x00000010, 0x2c620002, 0x00000018, 0x8000000a, + 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c070000, 0x0000000c, 0x1f800001, + 0x00000010, 0x91de0000, 0x00000018, 0x8000ff11, 0x00000008, 0x2c8000b0, + 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800108, + 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x00000010, 0x91de0000, + 0x00000000, 0x2adf0000, 0x00000008, 0x2a00000a, 0x00000018, 0x8000ff07, + 0x00000000, 0x82265600, 0x0000000f, 0x47220008, 0x00000009, 0x070e000f, + 0x00000008, 0x070e0008, 0x00000008, 0x02800001, 0x00000007, 0x02851c00, + 0x00000008, 0x82850001, 0x00000000, 0x02840a00, 0x00000007, 0x42851c00, + 0x00000003, 0xc3aa5200, 0x00000000, 0x03b10e00, 0x00000010, 0x001f0000, + 0x0000000f, 0x0f280007, 0x00000007, 0x4b071c00, 0x00000000, 0x00000000, + 0x0000000f, 0x0a960003, 0x00000000, 0x0a955c00, 0x00000000, 0x4a005a00, + 0x00000000, 0x0c960a00, 0x00000009, 0x0c99ffff, 0x00000008, 0x0d00ffff, + 0x00000010, 0xb1963202, 0x00000008, 0x0f800005, 0x00000010, 0x00220020, + 0x00000000, 0x02a70000, 0x00000010, 0xb1850002, 0x00000008, 0x82850200, + 0x00000000, 0x02000000, 0x00000000, 0x03a60000, 0x00000018, 0x8000004e, + 0x00000000, 0x072b0000, 0x00000001, 0x878c1c00, 0x00000000, 0x870e1e00, + 0x00000000, 0x860c1e00, 0x00000000, 0x03061e00, 0x00000010, 0xb18e0003, + 0x00000018, 0x80000047, 0x00000018, 0x8000fffa, 0x00000010, 0x918c0003, + 0x00000010, 0xb1870002, 0x00000018, 0x80000043, 0x00000010, 0x91d40000, + 0x0000000c, 0x29800001, 0x00000000, 0x2a860000, 0x00000000, 0x230c0000, + 0x00000000, 0x2b070000, 0x00000010, 0xb187000e, 0x00000008, 0x2a000008, + 0x00000018, 0x8000003b, 0x00000010, 0x91d40000, 0x00000000, 0x28d18c00, + 0x00000000, 0x2a860000, 0x00000000, 0x230c0000, 0x00000000, 0x2b070000, + 0x00000018, 0x8000fff8, 0x00000010, 0x91d40000, 0x0000000c, 0x29800001, + 0x00000000, 0x2aab0000, 0x00000000, 0xa3265600, 0x00000000, 0x2b000000, + 0x0000000c, 0x1f800001, 0x00000008, 0x2a000008, 0x00000018, 0x8000fec8, + 0x00000010, 0x91d40000, 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, + 0x00000008, 0x2a000009, 0x00000018, 0x8000fec3, 0x00000010, 0x91d40000, + 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x00000000, 0x29420000, + 0x00000008, 0x2a000002, 0x00000018, 0x8000febd, 0x00000018, 0x8000febc, + 0x00000010, 0xb1bcb016, 0x0000000b, 0x2fdf0002, 0x00000000, 0x03d80000, + 0x00000000, 0x2c3c0000, 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, + 0x00000010, 0x91d40000, 0x00000008, 0x2d800150, 0x00000000, 0x00000000, + 0x00000010, 0x205f0000, 0x00000008, 0x2c800000, 0x00000008, 0x2d000000, + 0x00000008, 0x2d800108, 0x00000008, 0x07000001, 0x00000010, 0xb5de1c00, + 0x00000010, 0x2c620002, 0x00000018, 0x8000000a, 0x0000000b, 0x2fdf0002, + 0x00000000, 0x2c070000, 0x0000000c, 0x1f800000, 0x00000010, 0x91de0000, + 0x00000018, 0x8000fea6, 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, + 0x00000010, 0x91d40000, 0x00000008, 0x2d800108, 0x0000000c, 0x29800000, + 0x0000000c, 0x1f800000, 0x00000010, 0x91de0000, 0x00000000, 0x2adf0000, + 0x00000008, 0x2a000006, 0x00000018, 0x8000fe9c, 0x00000008, 0x03050004, + 0x00000006, 0x83040c00, 0x00000008, 0x02850200, 0x00000000, 0x86050c00, + 0x00000001, 0x860c0e00, 0x00000008, 0x02040004, 0x00000000, 0x02041800, + 0x00000000, 0x83871800, 0x00000018, 0x00020000 }; + +static u32 bnx2_rv2p_proc2[] = { + 0x00000000, 0x2a000000, 0x00000010, 0xb1d40000, 0x00000008, 0x02540003, + 0x00000018, 0x00040000, 0x00000018, 0x8000000a, 0x00000018, 0x8000000a, + 0x00000018, 0x8000000e, 0x00000018, 0x80000056, 0x00000018, 0x800001b9, + 0x00000018, 0x800001e1, 0x00000018, 0x8000019b, 0x00000018, 0x800001f9, + 0x00000018, 0x8000019f, 0x00000018, 0x800001a6, 0x00000018, 0x80000000, + 0x0000000c, 0x29800001, 0x00000000, 0x2a000000, 0x0000000c, 0x29800000, + 0x00000010, 0x20530000, 0x00000018, 0x8000ffee, 0x0000000c, 0x29800001, + 0x00000010, 0x91de0000, 0x00000010, 0x001f0000, 0x00000000, 0x2f80aa00, + 0x00000000, 0x2a000000, 0x00000000, 0x0d610000, 0x00000000, 0x03620000, + 0x00000000, 0x2c400000, 0x00000000, 0x02638c00, 0x00000000, 0x26460000, + 0x00000010, 0x00420002, 0x00000008, 0x02040012, 0x00000010, 0xb9060836, + 0x00000000, 0x0f580000, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, + 0x00000000, 0x0b660000, 0x00000000, 0x0c000000, 0x00000000, 0x0b800000, + 0x00000010, 0x00420009, 0x00000008, 0x0cc60012, 0x00000008, 0x0f800003, + 0x00000000, 0x00000000, 0x00000010, 0x009f0000, 0x00000008, 0x27110012, + 0x00000000, 0x66900000, 0x00000008, 0xa31b0012, 0x00000018, 0x80000008, + 0x00000000, 0x0cc60000, 0x00000008, 0x0f800003, 0x00000000, 0x00000000, + 0x00000010, 0x009f0000, 0x00000000, 0x27110000, 0x00000000, 0x66900000, + 0x00000000, 0x231b0000, 0x00000010, 0xb197320e, 0x00000000, 0x25960000, + 0x00000000, 0x021b0000, 0x00000010, 0x001f0000, 0x00000008, 0x0f800003, + 0x0000000c, 0x29800000, 0x00000010, 0x20530000, 0x00000000, 0x22c50800, + 0x00000010, 0x009f0000, 0x00000000, 0x27002200, 0x00000000, 0x26802000, + 0x00000000, 0x231b0000, 0x0000000c, 0x69520001, 0x00000018, 0x8000fff3, + 0x00000010, 0x01130002, 0x00000010, 0xb1980003, 0x00000010, 0x001f0000, + 0x00000008, 0x0f800004, 0x00000008, 0x22000003, 0x00000008, 0x2c80000c, + 0x00000008, 0x2d00000c, 0x00000010, 0x009f0000, 0x00000000, 0x25960000, + 0x0000000c, 0x29800000, 0x00000000, 0x32140000, 0x00000000, 0x32950000, + 0x00000000, 0x33160000, 0x00000000, 0x31e32e00, 0x00000008, 0x2d800010, + 0x00000010, 0x20530000, 0x00000018, 0x8000ffac, 0x00000000, 0x23000000, + 0x00000000, 0x25e60000, 0x00000008, 0x2200000b, 0x0000000c, 0x69520000, + 0x0000000c, 0x29800000, 0x00000010, 0x20530000, 0x00000018, 0x8000ffa5, + 0x0000000c, 0x29800001, 0x00000010, 0x91de0000, 0x00000000, 0x2fd50000, + 0x00000010, 0x001f0000, 0x00000000, 0x02700000, 0x00000000, 0x0d620000, + 0x00000000, 0xbb630800, 0x00000000, 0x2a000000, 0x00000009, 0x076000ff, + 0x0000000f, 0x2c0e0007, 0x00000008, 0x2c800000, 0x00000008, 0x2d000064, + 0x00000008, 0x2d80011c, 0x00000009, 0x06420002, 0x0000000c, 0x61420001, + 0x00000000, 0x0f400000, 0x00000000, 0x02d08c00, 0x00000000, 0x23000000, + 0x00000004, 0x826da000, 0x00000000, 0x8304a000, 0x00000000, 0x22c50c00, + 0x00000000, 0x03760000, 0x00000004, 0x83860a00, 0x00000000, 0x83870c00, + 0x00000010, 0x91de0000, 0x00000000, 0x037c0000, 0x00000000, 0x837b0c00, + 0x00000001, 0x83060e00, 0x00000000, 0x83870c00, 0x00000000, 0x82850e00, + 0x00000010, 0xb1860016, 0x0000000f, 0x47610018, 0x00000000, 0x068e0000, + 0x0000000f, 0x47670010, 0x0000000f, 0x47e20010, 0x00000000, 0x870e1e00, + 0x00000010, 0xb70e1a10, 0x00000010, 0x0ce7000e, 0x00000008, 0x22000009, + 0x00000000, 0x286d0000, 0x0000000f, 0x65680010, 0x00000003, 0xf66c9400, + 0x00000010, 0xb972a003, 0x0000000c, 0x73e70019, 0x0000000c, 0x21420004, + 0x00000018, 0x8000023f, 0x00000000, 0x37ed0000, 0x0000000c, 0x73e7001a, + 0x00000010, 0x20530000, 0x00000008, 0x22000008, 0x0000000c, 0x61420004, + 0x00000000, 0x02f60000, 0x00000004, 0x82840a00, 0x00000010, 0xb1840a2b, + 0x00000010, 0x2d67000a, 0x00000010, 0xb96d0804, 0x00000004, 0xb6ed0a00, + 0x00000000, 0x37ed0000, 0x00000018, 0x80000029, 0x0000000c, 0x61420000, + 0x00000000, 0x37040000, 0x00000000, 0x37850000, 0x0000000c, 0x33e7001a, + 0x00000018, 0x80000024, 0x00000010, 0xb96d0809, 0x00000004, 0xb6ed0a00, + 0x00000000, 0x036d0000, 0x00000004, 0xb76e0c00, 0x00000010, 0x91ee0c1f, + 0x0000000c, 0x73e7001a, 0x00000004, 0xb6ef0c00, 0x00000000, 0x37ed0000, + 0x00000018, 0x8000001b, 0x0000000c, 0x61420000, 0x00000010, 0xb7ee0a05, + 0x00000010, 0xb96f0815, 0x00000003, 0xb76e0800, 0x00000004, 0xb7ef0a00, + 0x00000018, 0x80000015, 0x00000010, 0x0ce7000c, 0x00000008, 0x22000009, + 0x00000000, 0x286d0000, 0x0000000f, 0x65680010, 0x00000003, 0xf66c9400, + 0x00000010, 0xb972a003, 0x0000000c, 0x73e70019, 0x0000000c, 0x21420004, + 0x00000018, 0x80000215, 0x00000010, 0x20530000, 0x00000008, 0x22000008, + 0x0000000c, 0x61420004, 0x00000000, 0x37040000, 0x00000000, 0x37850000, + 0x00000000, 0x036d0000, 0x00000003, 0xb8f10c00, 0x00000018, 0x80000004, + 0x00000000, 0x02840000, 0x00000002, 0x21421800, 0x0000000c, 0x61420000, + 0x00000000, 0x286d0000, 0x0000000f, 0x65ed0010, 0x00000009, 0x266dffff, + 0x00000000, 0x23000000, 0x00000010, 0xb1840a3d, 0x00000010, 0x01420002, + 0x00000004, 0xb8f10a00, 0x00000003, 0x83760a00, 0x00000010, 0xb8040c39, + 0x00000010, 0xb7e6080a, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, + 0x00000009, 0x0c68ffff, 0x00000009, 0x0b67ffff, 0x00000000, 0x0be60000, + 0x00000000, 0x0c840000, 0x00000010, 0xb197320c, 0x00000008, 0x0f800002, + 0x00000018, 0x8000000a, 0x00000000, 0x0a6a0000, 0x00000000, 0x0aeb0000, + 0x00000000, 0x0c000000, 0x00000009, 0x0b6cffff, 0x00000000, 0x0be90000, + 0x00000000, 0x0c840000, 0x00000010, 0xb1973203, 0x00000008, 0x0f800002, + 0x00000018, 0x80000001, 0x00000010, 0x001f0000, 0x00000000, 0x0c860000, + 0x00000000, 0x06980000, 0x00000008, 0x0f800003, 0x00000000, 0x00000000, + 0x00000010, 0x009f0000, 0x00000010, 0xb1973210, 0x00000000, 0x231b0000, + 0x00000000, 0x02043600, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010, + 0x00000009, 0x2607ffff, 0x00000000, 0x27111a00, 0x00000000, 0x66900000, + 0x0000000c, 0x29000000, 0x00000018, 0x800001de, 0x00000000, 0x06980000, + 0x00000010, 0x20530000, 0x00000000, 0x22c58c00, 0x00000010, 0x001f0000, + 0x00000008, 0x0f800003, 0x00000018, 0x8000fff0, 0x00000000, 0x02043600, + 0x00000000, 0x231b0000, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010, + 0x00000009, 0x2607ffff, 0x00000000, 0x27111a00, 0x00000000, 0x66900000, + 0x0000000c, 0x29000000, 0x00000010, 0x91840a02, 0x00000002, 0x21421800, + 0x00000000, 0x32140000, 0x00000000, 0x32950000, 0x00000005, 0x73e72c00, + 0x00000005, 0x74683000, 0x00000000, 0x33170000, 0x00000018, 0x80000138, + 0x00000010, 0x91c60004, 0x00000008, 0x07000004, 0x00000010, 0xb1c41c02, + 0x00000010, 0x91840a04, 0x00000018, 0x800001c3, 0x00000010, 0x20530000, + 0x00000000, 0x22c58c00, 0x00000010, 0xb1840a8e, 0x0000000c, 0x21420006, + 0x00000010, 0x0ce7001a, 0x0000000f, 0x43680010, 0x00000000, 0x03f30c00, + 0x00000010, 0x91870850, 0x0000000f, 0x46ec0010, 0x00000010, 0xb68d0c4e, + 0x00000000, 0x838d0c00, 0x00000000, 0xa3050800, 0x00000001, 0xa3460e00, + 0x00000000, 0x02048c00, 0x00000010, 0x91840a02, 0x00000002, 0x21421800, + 0x00000010, 0x001f0000, 0x00000008, 0x22000008, 0x00000003, 0x8384a000, + 0x0000000f, 0x65870010, 0x00000009, 0x2607ffff, 0x00000000, 0x27750c00, + 0x00000000, 0x66f40000, 0x0000000c, 0x29000000, 0x00000018, 0x800001aa, + 0x00000000, 0x03068c00, 0x00000003, 0xf4680c00, 0x00000010, 0x20530000, + 0x00000000, 0x22c58c00, 0x00000018, 0x8000ffe5, 0x00000000, 0x39760000, + 0x00000000, 0x39840000, 0x0000000c, 0x33e70019, 0x00000010, 0x001f0000, + 0x00000000, 0x031e0000, 0x00000000, 0x0760fe00, 0x0000000f, 0x0f0e0007, + 0x00000000, 0x83850800, 0x00000000, 0x0a7d0000, 0x00000000, 0x0afe0000, + 0x00000000, 0x0b7f0000, 0x00000000, 0x0d7a0000, 0x00000000, 0x0c000000, + 0x00000000, 0x0bfc0000, 0x00000000, 0x0c970e00, 0x00000008, 0x0f800003, + 0x0000000f, 0x47670010, 0x00000008, 0x070e0001, 0x0000000b, 0xc38000ff, + 0x00000002, 0x43870000, 0x00000001, 0x33e70e00, 0x0000000f, 0x038e0010, + 0x00000002, 0x33e70e00, 0x00000000, 0x28f30000, 0x00000010, 0x009f0000, + 0x00000000, 0x02043600, 0x00000010, 0x91840a02, 0x00000002, 0x21421800, + 0x00000008, 0x22000006, 0x00000000, 0x231b0000, 0x00000000, 0x23ff0000, + 0x00000000, 0x241b0000, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010, + 0x00000009, 0x2607ffff, 0x00000000, 0x27110000, 0x00000000, 0x26900000, + 0x0000000c, 0x29000000, 0x00000018, 0x8000017e, 0x00000003, 0xf4683600, + 0x00000000, 0x3a100000, 0x00000000, 0x3a910000, 0x00000003, 0xf66c2400, + 0x00000010, 0x001f0000, 0x00000010, 0xb1923604, 0x00000008, 0x0f800004, + 0x00000000, 0x00000000, 0x00000010, 0x009f0000, 0x00000000, 0x3e170000, + 0x00000000, 0x3e940000, 0x00000000, 0x3f150000, 0x00000000, 0x3f960000, + 0x00000010, 0x001f0000, 0x00000000, 0x0f060000, 0x00000010, 0x20530000, + 0x00000000, 0x22c53600, 0x00000018, 0x8000ffac, 0x00000010, 0x001f0000, + 0x00000000, 0x031e0000, 0x00000000, 0x83850800, 0x00000009, 0x076000ff, + 0x0000000f, 0x0f0e0007, 0x00000000, 0x0c000000, 0x00000000, 0x0a7d0000, + 0x00000000, 0x0afe0000, 0x00000000, 0x0b7f0000, 0x00000000, 0x0d7a0000, + 0x00000000, 0x0bfc0000, 0x00000000, 0x0c970e00, 0x00000008, 0x0f800003, + 0x0000000f, 0x47670010, 0x00000008, 0x070e0001, 0x0000000b, 0xc38000ff, + 0x00000002, 0x43870000, 0x00000001, 0x33e70e00, 0x0000000f, 0x038e0010, + 0x00000002, 0x33e70e00, 0x00000000, 0x39840000, 0x00000003, 0xb9720800, + 0x00000000, 0x28f30000, 0x0000000f, 0x65680010, 0x00000010, 0x009f0000, + 0x00000000, 0x02043600, 0x00000010, 0x91840a02, 0x00000002, 0x21421800, + 0x00000008, 0x22000007, 0x00000000, 0x231b0000, 0x00000000, 0x23ff0000, + 0x00000000, 0x241b0000, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010, + 0x00000009, 0x2607ffff, 0x00000000, 0x27110000, 0x00000000, 0x26900000, + 0x0000000c, 0x29000000, 0x00000018, 0x80000145, 0x00000003, 0xf4683600, + 0x00000000, 0x3a100000, 0x00000000, 0x3a910000, 0x00000003, 0xf66c2400, + 0x00000010, 0x001f0000, 0x00000010, 0xb1923604, 0x00000008, 0x0f800004, + 0x00000000, 0x00000000, 0x00000010, 0x009f0000, 0x00000000, 0x3e170000, + 0x00000000, 0x3e940000, 0x00000000, 0x3f150000, 0x00000000, 0x3f960000, + 0x00000010, 0x001f0000, 0x00000000, 0x0f060000, 0x00000010, 0x20530000, + 0x00000000, 0x22c53600, 0x00000018, 0x8000ff73, 0x00000010, 0x0ce70005, + 0x00000008, 0x2c80000c, 0x00000008, 0x2d000070, 0x00000008, 0x2d800010, + 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000018, 0x8000011d, + 0x00000000, 0x2c1e0000, 0x00000008, 0x2c8000b8, 0x00000008, 0x2d000010, + 0x00000008, 0x2d800048, 0x00000000, 0x00000000, 0x00000010, 0x91de0000, + 0x00000018, 0x8000fe5d, 0x0000000c, 0x29800001, 0x00000000, 0x2a000000, + 0x00000010, 0x001f0000, 0x00000000, 0x0f008000, 0x00000008, 0x0f800007, + 0x00000018, 0x80000006, 0x0000000c, 0x29800001, 0x00000000, 0x2a000000, + 0x00000010, 0x001f0000, 0x0000000f, 0x0f470007, 0x00000008, 0x0f800008, + 0x00000018, 0x80000119, 0x00000010, 0x20530000, 0x00000018, 0x8000fe4f, + 0x0000000c, 0x29800001, 0x00000010, 0x91de0000, 0x00000000, 0x2fd50000, + 0x00000000, 0x2a000000, 0x00000009, 0x0261ffff, 0x0000000d, 0x70e10001, + 0x00000018, 0x80000101, 0x00000000, 0x2c400000, 0x00000008, 0x2c8000c4, + 0x00000008, 0x2d00001c, 0x00000008, 0x2d800001, 0x00000005, 0x70e10800, + 0x00000010, 0x91de0000, 0x00000018, 0x8000fe41, 0x0000000c, 0x29800001, + 0x00000010, 0x91de0000, 0x00000000, 0x2fd50000, 0x00000010, 0x001f0000, + 0x00000000, 0x02700000, 0x00000000, 0x0d620000, 0x00000000, 0xbb630800, + 0x00000000, 0x2a000000, 0x00000000, 0x0f400000, 0x00000000, 0x2c400000, + 0x0000000c, 0x73e7001b, 0x00000010, 0x0ce7000e, 0x00000000, 0x286d0000, + 0x0000000f, 0x65ed0010, 0x00000009, 0x266dffff, 0x00000018, 0x80000069, + 0x00000008, 0x02000004, 0x00000010, 0x91c40803, 0x00000018, 0x800000f6, + 0x00000010, 0x20530000, 0x00000018, 0x800000e5, 0x00000008, 0x2c8000b8, + 0x00000008, 0x2d000010, 0x00000008, 0x2d800048, 0x00000018, 0x80000005, + 0x00000008, 0x2c8000c4, 0x00000008, 0x2d00001c, 0x00000008, 0x2d800001, + 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000008, 0x2c800048, + 0x00000008, 0x2d000068, 0x00000008, 0x2d800104, 0x00000000, 0x00000000, + 0x00000010, 0x91de0000, 0x00000000, 0x27f60000, 0x00000010, 0xb87a9e04, + 0x00000008, 0x2200000d, 0x00000018, 0x800000e2, 0x00000010, 0x20530000, + 0x00000018, 0x8000fe18, 0x0000000c, 0x29800001, 0x00000010, 0x91de0000, + 0x00000000, 0x2fd50000, 0x00000010, 0x001f0000, 0x00000000, 0x02700000, + 0x00000000, 0x0d620000, 0x00000000, 0xbb630800, 0x00000000, 0x2a000000, + 0x00000010, 0x0e670011, 0x00000000, 0x286d0000, 0x0000000f, 0x65ed0010, + 0x00000009, 0x266dffff, 0x00000004, 0xb8f1a000, 0x00000000, 0x0f400000, + 0x0000000c, 0x73e7001c, 0x00000018, 0x80000040, 0x00000008, 0x02000004, + 0x00000010, 0x91c40802, 0x00000018, 0x800000cd, 0x00000000, 0x2c1e0000, + 0x00000008, 0x2c8000b8, 0x00000008, 0x2d000010, 0x00000008, 0x2d800048, + 0x00000010, 0x20530000, 0x00000010, 0x91de0000, 0x00000018, 0x8000fdfe, + 0x0000000c, 0x29800001, 0x00000000, 0x03550000, 0x00000000, 0x06460000, + 0x00000000, 0x03d60000, 0x00000000, 0x2a000000, 0x0000000f, 0x0f480007, + 0x00000010, 0xb18c0027, 0x0000000f, 0x47420008, 0x00000009, 0x070e000f, + 0x00000008, 0x070e0008, 0x00000010, 0x001f0000, 0x00000008, 0x09000001, + 0x00000007, 0x09121c00, 0x00000003, 0xcbca9200, 0x00000000, 0x0b97a200, + 0x00000007, 0x4b171c00, 0x0000000f, 0x0a960003, 0x00000000, 0x0a959c00, + 0x00000000, 0x4a009a00, 0x00000008, 0x82120001, 0x00000001, 0x0c170800, + 0x00000000, 0x02180000, 0x00000000, 0x0c971800, 0x00000008, 0x0d00ffff, + 0x00000008, 0x0f800006, 0x0000000c, 0x29000000, 0x00000008, 0x22000001, + 0x00000000, 0x22c50c00, 0x00000010, 0x009f0000, 0x00000010, 0xb197320b, + 0x00000000, 0x231b0000, 0x00000000, 0x27110800, 0x00000000, 0x66900000, + 0x00000018, 0x800000a4, 0x00000000, 0x02180000, 0x00000010, 0x20530000, + 0x00000000, 0x22c53600, 0x00000010, 0x001f0000, 0x00000008, 0x0f800006, + 0x00000018, 0x8000fff5, 0x00000010, 0x91870002, 0x00000008, 0x2200000a, + 0x00000000, 0x231b0000, 0x00000000, 0x27110800, 0x00000000, 0x66900000, + 0x00000018, 0x80000098, 0x00000008, 0x0200000a, 0x00000010, 0x91c40804, + 0x00000010, 0x02c20003, 0x00000010, 0x001f0000, 0x00000008, 0x0f800008, + 0x00000010, 0x20530000, 0x00000018, 0x8000fdc9, 0x00000000, 0x06820000, + 0x00000010, 0x001f0000, 0x00000010, 0x0ce70028, 0x00000000, 0x03720000, + 0x00000000, 0xa8760c00, 0x00000000, 0x0cf60000, 0x00000010, 0xb8723224, + 0x00000000, 0x03440000, 0x00000008, 0x22000010, 0x00000000, 0x03ca0000, + 0x0000000f, 0x65680010, 0x00000000, 0x0bcf0000, 0x00000000, 0x27f20000, + 0x00000010, 0xb7ef3203, 0x0000000c, 0x21420004, 0x0000000c, 0x73e70019, + 0x00000000, 0x07520000, 0x00000000, 0x29000000, 0x00000018, 0x8000007e, + 0x00000004, 0xb9723200, 0x00000010, 0x20530000, 0x00000000, 0x22060000, + 0x0000000c, 0x61420004, 0x00000000, 0x25070000, 0x00000000, 0x27970000, + 0x00000000, 0x290e0000, 0x00000010, 0x0ce70010, 0x00000010, 0xb873320f, + 0x0000000f, 0x436c0010, 0x00000000, 0x03f30c00, 0x00000000, 0x03f30000, + 0x00000000, 0x83990e00, 0x00000001, 0x83860e00, 0x00000000, 0x83060e00, + 0x00000003, 0xf66c0c00, 0x00000000, 0x39f30e00, 0x00000000, 0x3af50e00, + 0x00000000, 0x7a740000, 0x0000000f, 0x43680010, 0x00000001, 0x83860e00, + 0x00000000, 0x83060e00, 0x00000003, 0xf4680c00, 0x00000000, 0x286d0000, + 0x00000000, 0x03690000, 0x00000010, 0xb1f60c54, 0x00000000, 0x0a6a0000, + 0x00000000, 0x0aeb0000, 0x00000009, 0x0b6cffff, 0x00000000, 0x0c000000, + 0x00000000, 0x0be90000, 0x00000003, 0x8cf6a000, 0x0000000c, 0x09800002, + 0x00000010, 0x009f0000, 0x00000010, 0xb8173209, 0x00000000, 0x35140000, + 0x00000000, 0x35950000, 0x00000005, 0x766c2c00, 0x00000000, 0x34970000, + 0x00000004, 0xb8f12e00, 0x00000010, 0x001f0000, 0x00000008, 0x0f800004, + 0x00000018, 0x8000fff7, 0x00000000, 0x03e90000, 0x00000010, 0xb8f6a01a, + 0x00000010, 0x20130019, 0x00000010, 0xb1f10e18, 0x00000000, 0x83973200, + 0x00000000, 0x38700e00, 0x00000000, 0xbb760e00, 0x00000000, 0x37d00000, + 0x0000000c, 0x73e7001a, 0x00000003, 0xb8f1a000, 0x00000000, 0x32140000, + 0x00000000, 0x32950000, 0x00000005, 0x73e72c00, 0x00000000, 0x33190000, + 0x00000005, 0x74680000, 0x00000010, 0x0ce7000d, 0x00000008, 0x22000009, + 0x00000000, 0x07520000, 0x00000000, 0x29000000, 0x0000000c, 0x73e70019, + 0x0000000f, 0x65680010, 0x0000000c, 0x21420004, 0x00000018, 0x8000003c, + 0x00000010, 0x20530000, 0x0000000c, 0x61420004, 0x00000000, 0x290e0000, + 0x00000018, 0x80000002, 0x00000010, 0x91973206, 0x00000000, 0x35140000, + 0x00000000, 0x35950000, 0x00000005, 0x766c2c00, 0x00000000, 0x34990000, + 0x00000004, 0xb8f13200, 0x00000000, 0x83690c00, 0x00000010, 0xb1860013, + 0x00000000, 0x28e90000, 0x00000008, 0x22000004, 0x00000000, 0x23ec0000, + 0x00000000, 0x03690000, 0x00000010, 0xb8660c07, 0x00000009, 0x036cffff, + 0x00000000, 0x326a0000, 0x00000000, 0x32eb0000, 0x00000005, 0x73e70c00, + 0x00000000, 0x33690000, 0x00000005, 0x74680000, 0x0000000c, 0x73e7001c, + 0x00000000, 0x03690000, 0x00000010, 0xb1f60c12, 0x00000010, 0xb1d00c11, + 0x0000000c, 0x21420005, 0x0000000c, 0x33e7001c, 0x00000018, 0x8000000e, + 0x00000010, 0x2e67000d, 0x00000000, 0x03690000, 0x00000010, 0xb1f60c0b, + 0x00000010, 0xb1d00c0a, 0x00000000, 0x03440000, 0x00000008, 0x2200000c, + 0x00000000, 0x07520000, 0x00000000, 0x29000000, 0x00000018, 0x80000015, + 0x0000000c, 0x33e7001c, 0x00000010, 0x20530000, 0x00000000, 0x22060000, + 0x00000000, 0x290e0000, 0x00000018, 0x000d0000, 0x00000000, 0x06820000, + 0x00000010, 0x2de7000d, 0x00000010, 0x0ce7000c, 0x00000000, 0x27f20000, + 0x00000010, 0xb96d9e0a, 0x00000000, 0xa86d9e00, 0x00000009, 0x0361ffff, + 0x00000010, 0xb7500c07, 0x00000008, 0x2200000f, 0x0000000f, 0x65680010, + 0x00000000, 0x29000000, 0x00000018, 0x80000004, 0x0000000c, 0x33e7001b, + 0x00000010, 0x20530000, 0x00000018, 0x000d0000, 0x00000000, 0x2b820000, + 0x00000010, 0x20d2002f, 0x00000010, 0x0052002e, 0x00000009, 0x054e0007, + 0x00000010, 0xb18a002c, 0x00000000, 0x050a8c00, 0x00000008, 0x850a0008, + 0x00000010, 0x918a0029, 0x00000003, 0xc5008800, 0x00000008, 0xa3460001, + 0x00000010, 0xb1c60007, 0x00000008, 0x22000001, 0x0000000c, 0x29800000, + 0x00000010, 0x20530000, 0x00000000, 0x274e8c00, 0x00000000, 0x66cd0000, + 0x00000000, 0x22c58c00, 0x00000008, 0x22000014, 0x00000003, 0x22c58e00, + 0x00000003, 0x23c58e00, 0x00000003, 0x22c58e00, 0x00000003, 0x26cd9e00, + 0x00000003, 0x27cd9e00, 0x00000003, 0x26cd9e00, 0x00000003, 0x274ea000, + 0x00000003, 0x284ea000, 0x00000003, 0x274ea000, 0x0000000c, 0x69520000, + 0x0000000c, 0x29800000, 0x00000010, 0x20530000, 0x00000003, 0x22c58e00, + 0x00000003, 0x23c58e00, 0x00000003, 0x22c58e00, 0x00000003, 0x26cd9e00, + 0x00000003, 0x27cd9e00, 0x00000003, 0x26cd9e00, 0x00000003, 0x274ea000, + 0x00000003, 0x284ea000, 0x00000003, 0x274ea000, 0x00000000, 0xa2c58c00, + 0x00000000, 0xa74e8c00, 0x00000000, 0xe6cd0000, 0x0000000f, 0x620a0010, + 0x00000008, 0x23460001, 0x0000000c, 0x29800000, 0x00000010, 0x20530000, + 0x0000000c, 0x29520000, 0x00000018, 0x80000002, 0x0000000c, 0x29800000, + 0x00000018, 0x00570000 }; + +static int bnx2_TPAT_b06FwReleaseMajor = 0x0; +static int bnx2_TPAT_b06FwReleaseMinor = 0x0; +static int bnx2_TPAT_b06FwReleaseFix = 0x0; +static u32 bnx2_TPAT_b06FwStartAddr = 0x08000858; +static u32 bnx2_TPAT_b06FwTextAddr = 0x08000800; +static int bnx2_TPAT_b06FwTextLen = 0x1314; +static u32 bnx2_TPAT_b06FwDataAddr = 0x08001b40; +static int bnx2_TPAT_b06FwDataLen = 0x0; +static u32 bnx2_TPAT_b06FwRodataAddr = 0x00000000; +static int bnx2_TPAT_b06FwRodataLen = 0x0; +static u32 bnx2_TPAT_b06FwBssAddr = 0x08001b90; +static int bnx2_TPAT_b06FwBssLen = 0x80; +static u32 bnx2_TPAT_b06FwSbssAddr = 0x08001b40; +static int bnx2_TPAT_b06FwSbssLen = 0x48; + +static u32 bnx2_TPAT_b06FwText[(0x1314/4) + 1] = { + 0x0a000216, 0x00000000, 0x00000000, 0x0000000d, 0x74706174, 0x20302e36, + 0x2e390000, 0x00060901, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x10000003, + 0x00000000, 0x0000000d, 0x0000000d, 0x3c020800, 0x24421b40, 0x3c030800, + 0x24631c10, 0xac400000, 0x0043202b, 0x1480fffd, 0x24420004, 0x3c1d0800, + 0x37bd3ffc, 0x03a0f021, 0x3c100800, 0x26100858, 0x3c1c0800, 0x279c1b40, + 0x0e00051f, 0x00000000, 0x0000000d, 0x8f820024, 0x27bdffe8, 0xafbf0014, + 0x10400004, 0xafb00010, 0x0000000d, 0x00000000, 0x2400015f, 0x8f82001c, + 0x8c450008, 0x24030800, 0xaf430178, 0x97430104, 0x3c020008, 0xaf420140, + 0x8f820034, 0x30420001, 0x10400006, 0x3070ffff, 0x24020002, 0x2603fffe, + 0xa7420146, 0x0a000246, 0xa7430148, 0xa7400146, 0x8f850034, 0x30a20020, + 0x0002102b, 0x00021023, 0x30460009, 0x30a30c00, 0x24020400, 0x14620002, + 0x34c40001, 0x34c40005, 0xa744014a, 0x3c020800, 0x8c440820, 0x3c030048, + 0x24020002, 0x00832025, 0x30a30006, 0x1062000d, 0x2c620003, 0x50400005, + 0x24020004, 0x10600012, 0x3c020001, 0x0a000271, 0x00000000, 0x10620007, + 0x24020006, 0x1462000f, 0x3c020111, 0x0a000269, 0x00821025, 0x0a000268, + 0x3c020101, 0x3c020011, 0x00821025, 0x24030001, 0xaf421000, 0xaf830030, + 0x0a000271, 0x00000000, 0x00821025, 0xaf421000, 0xaf800030, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x8f830030, 0x1060003f, 0x3c048000, + 0x8f421000, 0x00441024, 0x1040fffd, 0x00000000, 0x10600039, 0x00000000, + 0x8f421000, 0x3c030020, 0x00431024, 0x10400034, 0x00000000, 0x97421014, + 0x14400031, 0x00000000, 0x97421008, 0x8f84001c, 0x24420006, 0x00024082, + 0x00081880, 0x00643821, 0x8ce50000, 0x30430003, 0x30420001, 0x10400004, + 0x00000000, 0x0000000d, 0x0a0002b0, 0x00081080, 0x5460000f, 0x30a5ffff, + 0x3c06ffff, 0x00a62824, 0x0005182b, 0x00a61026, 0x0002102b, 0x00621824, + 0x10600004, 0x00000000, 0x0000000d, 0x00000000, 0x240001fc, 0x8ce20000, + 0x0a0002af, 0x00462825, 0x0005182b, 0x38a2ffff, 0x0002102b, 0x00621824, + 0x10600004, 0x00000000, 0x0000000d, 0x00000000, 0x24000206, 0x8ce20000, + 0x3445ffff, 0x00081080, 0x00441021, 0x3c030800, 0xac450000, 0x8c620840, + 0x24420001, 0xac620840, 0x8f820008, 0x10400003, 0x00000000, 0x0e000660, + 0x00000000, 0x8f840028, 0x02002821, 0x24820008, 0x30421fff, 0x24434000, + 0x0343d821, 0x30a30007, 0xaf840018, 0xaf820028, 0xaf420084, 0x10600002, + 0x24a20007, 0x3045fff8, 0x8f820044, 0x8f840004, 0x00451821, 0xaf82002c, + 0x0064102b, 0xaf830044, 0x14400002, 0x00641023, 0xaf820044, 0x8f840044, + 0x34028000, 0x8fbf0014, 0x8fb00010, 0x00821021, 0x03421821, 0x3c021000, + 0xaf83001c, 0xaf440080, 0xaf420178, 0x03e00008, 0x27bd0018, 0x8f820024, + 0x27bdffe8, 0xafbf0014, 0x10400004, 0xafb00010, 0x0000000d, 0x00000000, + 0x24000249, 0x8f85001c, 0x24020001, 0xaf820024, 0x8ca70008, 0xa3800023, + 0x8f620004, 0x3c100800, 0x26041b90, 0x00021402, 0xa3820010, 0x304600ff, + 0x24c60005, 0x0e00064a, 0x00063082, 0x8f640004, 0x8f430108, 0x3c021000, + 0x00621824, 0xa7840020, 0x10600008, 0x00000000, 0x97420104, 0x93830023, + 0x2442ffec, 0x34630002, 0xa3830023, 0x0a000304, 0x3045ffff, 0x97420104, + 0x2442fff0, 0x3045ffff, 0x8f620004, 0x3042ffff, 0x2c420013, 0x14400004, + 0x00000000, 0x93820023, 0x34420001, 0xa3820023, 0x93830023, 0x24020001, + 0x10620009, 0x28620002, 0x14400014, 0x24020002, 0x10620012, 0x24020003, + 0x1062000a, 0x00000000, 0x0a000325, 0x00000000, 0x8f82001c, 0x8c43000c, + 0x3c04ffff, 0x00641824, 0x00651825, 0x0a000325, 0xac43000c, 0x8f82001c, + 0x8c430010, 0x3c04ffff, 0x00641824, 0x00651825, 0xac430010, 0x8f620004, + 0x3042ffff, 0x24420002, 0x00021083, 0xa3820038, 0x304500ff, 0x8f82001c, + 0x3c04ffff, 0x00052880, 0x00a22821, 0x8ca70000, 0x97820020, 0x97430104, + 0x00e42024, 0x24420002, 0x00621823, 0x00833825, 0xaca70000, 0x93840038, + 0x26061b90, 0x00041080, 0x00461021, 0x90430000, 0x3063000f, 0x00832021, + 0xa3840022, 0x308200ff, 0x3c04fff6, 0x24420003, 0x00021080, 0x00461021, + 0x8c450000, 0x93830022, 0x8f82001c, 0x3484ffff, 0x00a43824, 0x00031880, + 0x00621821, 0xaf850000, 0xac67000c, 0x93820022, 0x93830022, 0x8f84001c, + 0x24420003, 0x00021080, 0x00461021, 0x24630004, 0x00031880, 0xac470000, + 0x93820022, 0x00661821, 0x94670002, 0x00021080, 0x00441021, 0xac670000, + 0x24030010, 0xac470010, 0xa7430140, 0x24030002, 0xa7400142, 0xa7400144, + 0xa7430146, 0x97420104, 0x8f840034, 0x24030001, 0x2442fffe, 0x30840006, + 0xa7420148, 0x24020002, 0xa743014a, 0x1082000d, 0x2c820003, 0x10400005, + 0x24020004, 0x10800011, 0x3c020009, 0x0a000383, 0x00000000, 0x10820007, + 0x24020006, 0x1482000d, 0x3c020119, 0x0a00037d, 0x24030001, 0x0a00037c, + 0x3c020109, 0x3c020019, 0x24030001, 0xaf421000, 0xaf830030, 0x0a000383, + 0x00000000, 0xaf421000, 0xaf800030, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x93820010, 0x24030008, 0x8f840030, 0x24420002, 0x30420007, + 0x00621823, 0x30630007, 0xaf83000c, 0x10800005, 0x3c038000, 0x8f421000, + 0x00431024, 0x1040fffd, 0x00000000, 0x8f820028, 0xaf820018, 0x24420010, + 0x30421fff, 0xaf820028, 0xaf420084, 0x97430104, 0x24424000, 0x0342d821, + 0x3063ffff, 0x30620007, 0x10400002, 0x24620007, 0x3043fff8, 0x8f820044, + 0x8f840004, 0x00431821, 0xaf82002c, 0x0064102b, 0xaf830044, 0x14400002, + 0x00641023, 0xaf820044, 0x8f840044, 0x34028000, 0x8fbf0014, 0x8fb00010, + 0x00821021, 0x03421821, 0x3c021000, 0xaf83001c, 0xaf440080, 0xaf420178, + 0x03e00008, 0x27bd0018, 0x8f820024, 0x27bdffe8, 0xafbf0014, 0x14400004, + 0xafb00010, 0x0000000d, 0x00000000, 0x240002db, 0x8f620004, 0x04410009, + 0x3c050800, 0x93820022, 0x8f830000, 0x24a41b90, 0xaf800024, 0x24420003, + 0x00021080, 0x00441021, 0xac430000, 0x93820038, 0x24a51b90, 0x93860010, + 0x3c040001, 0x27700008, 0x24420001, 0x00021080, 0x00451021, 0x8c430000, + 0x24c60005, 0x00063082, 0x00641821, 0x02002021, 0x0e00064a, 0xac430000, + 0x93840022, 0x3c057fff, 0x8f620004, 0x00042080, 0x00902021, 0x8c830004, + 0x34a5ffff, 0x00451024, 0x00621821, 0xac830004, 0x93850038, 0x3c07ffff, + 0x93840010, 0x00052880, 0x00b02821, 0x8ca30000, 0x97420104, 0x97860020, + 0x00671824, 0x00441021, 0x00461023, 0x3042ffff, 0x00621825, 0xaca30000, + 0x93830023, 0x24020001, 0x10620009, 0x28620002, 0x1440001a, 0x24020002, + 0x10620018, 0x24020003, 0x1062000d, 0x00000000, 0x0a000411, 0x00000000, + 0x93820010, 0x97430104, 0x8e04000c, 0x00621821, 0x2463fff2, 0x3063ffff, + 0x00872024, 0x00832025, 0x0a000411, 0xae04000c, 0x93820010, 0x97430104, + 0x8e040010, 0x00621821, 0x2463ffee, 0x3063ffff, 0x00872024, 0x00832025, + 0xae040010, 0x9783000e, 0x8f840034, 0x2402000a, 0xa7420140, 0xa7430142, + 0x93820010, 0xa7420144, 0xa7400146, 0x97430104, 0x30840006, 0x24020001, + 0xa7430148, 0xa742014a, 0x24020002, 0x1082000d, 0x2c820003, 0x10400005, + 0x24020004, 0x10800011, 0x3c020041, 0x0a000437, 0x00000000, 0x10820007, + 0x24020006, 0x1482000d, 0x3c020151, 0x0a000431, 0x24030001, 0x0a000430, + 0x3c020141, 0x3c020051, 0x24030001, 0xaf421000, 0xaf830030, 0x0a000437, + 0x00000000, 0xaf421000, 0xaf800030, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x8f820030, 0x93840010, 0x8f850028, 0x10400005, 0x3c038000, + 0x8f421000, 0x00431024, 0x1040fffd, 0x00000000, 0x2483000a, 0x30620007, + 0x10400002, 0x24620007, 0x304303f8, 0x00a31021, 0x30421fff, 0xaf850018, + 0xaf820028, 0xaf420084, 0x97430104, 0x24424000, 0x0342d821, 0x3063ffff, + 0x30620007, 0x10400002, 0x24620007, 0x3043fff8, 0x8f820044, 0x8f840004, + 0x00431821, 0xaf82002c, 0x0064102b, 0xaf830044, 0x14400002, 0x00641023, + 0xaf820044, 0x8f840044, 0x34028000, 0x8fbf0014, 0x8fb00010, 0x00821021, + 0x03421821, 0x3c021000, 0xaf83001c, 0xaf440080, 0xaf420178, 0x03e00008, + 0x27bd0018, 0x3c026000, 0x8c444448, 0x3c030800, 0xac64082c, 0x8f620000, + 0x97430104, 0x3c048000, 0x3046ffff, 0x3067ffff, 0x8f420178, 0x00441024, + 0x1440fffd, 0x2402000a, 0x30c30007, 0xa7420140, 0x24020008, 0x00431023, + 0x30420007, 0x24c3fffe, 0xa7420142, 0xa7430144, 0xa7400146, 0xa7470148, + 0x8f420108, 0x3c036000, 0x8f850034, 0x30420020, 0x0002102b, 0x00021023, + 0x30420009, 0x34420001, 0xa742014a, 0x8c644448, 0x3c020800, 0x30a50006, + 0xac440830, 0x24020002, 0x10a2000d, 0x2ca20003, 0x10400005, 0x24020004, + 0x10a00011, 0x3c020041, 0x0a0004a8, 0x00000000, 0x10a20007, 0x24020006, + 0x14a2000d, 0x3c020151, 0x0a0004a2, 0x24030001, 0x0a0004a1, 0x3c020141, + 0x3c020051, 0x24030001, 0xaf421000, 0xaf830030, 0x0a0004a8, 0x00000000, + 0xaf421000, 0xaf800030, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x8f820030, 0x24c30008, 0x10400006, 0x30e6ffff, 0x3c048000, 0x8f421000, + 0x00441024, 0x1040fffd, 0x00000000, 0x3c026000, 0x8c444448, 0x3065ffff, + 0x3c020800, 0x30a30007, 0x10600003, 0xac440834, 0x24a20007, 0x3045fff8, + 0x8f840028, 0x00851021, 0x30421fff, 0x24434000, 0x0343d821, 0x30c30007, + 0xaf840018, 0xaf820028, 0xaf420084, 0x10600002, 0x24c20007, 0x3046fff8, + 0x8f820044, 0x8f840004, 0x00461821, 0xaf82002c, 0x0064102b, 0xaf830044, + 0x14400002, 0x00641023, 0xaf820044, 0x8f840044, 0x34028000, 0x3c030800, + 0x8c650844, 0x00821021, 0x03421821, 0xaf83001c, 0xaf440080, 0x10a00006, + 0x2402000e, 0x93830043, 0x14620004, 0x3c021000, 0x2402043f, 0xa7420148, + 0x3c021000, 0x3c036000, 0xaf420178, 0x8c644448, 0x3c020800, 0x03e00008, + 0xac440838, 0x8f820034, 0x30424000, 0x10400005, 0x24020800, 0x0000000d, + 0x00000000, 0x24000405, 0x24020800, 0xaf420178, 0x97440104, 0x3c030008, + 0xaf430140, 0x8f820034, 0x30420001, 0x10400006, 0x3085ffff, 0x24020002, + 0x24a3fffe, 0xa7420146, 0x0a0004ff, 0xa7430148, 0xa7400146, 0x8f840028, + 0x2402000d, 0xa742014a, 0x24830008, 0x30631fff, 0x24624000, 0x0342d821, + 0x30a20007, 0xaf840018, 0xaf830028, 0xaf430084, 0x10400002, 0x24a20007, + 0x3045fff8, 0x8f820044, 0x8f840004, 0x00451821, 0xaf82002c, 0x0064102b, + 0xaf830044, 0x14400002, 0x00641023, 0xaf820044, 0x8f840044, 0x34028000, + 0x00821021, 0x03421821, 0x3c021000, 0xaf83001c, 0xaf440080, 0x03e00008, + 0xaf420178, 0x27bdffe8, 0x3c046008, 0xafbf0014, 0xafb00010, 0x8c825000, + 0x3c1a8000, 0x2403ff7f, 0x375b4000, 0x00431024, 0x3442380c, 0xac825000, + 0x8f430008, 0x3c100800, 0x37428000, 0x34630001, 0xaf430008, 0xaf82001c, + 0x3c02601c, 0xaf800028, 0xaf400080, 0xaf400084, 0x8c450008, 0x3c036000, + 0x8c620808, 0x3c040800, 0x3c030080, 0xac830820, 0x3042fff0, 0x38420010, + 0x2c420001, 0xaf850004, 0xaf820008, 0x0e00062f, 0x00000000, 0x8f420000, + 0x30420001, 0x1040fffb, 0x00000000, 0x8f440108, 0x30822000, 0xaf840034, + 0x10400004, 0x8e02083c, 0x24420001, 0x0a00059d, 0xae02083c, 0x30820200, + 0x10400027, 0x00000000, 0x97420104, 0x1040001c, 0x30824000, 0x14400005, + 0x00000000, 0x0e00022d, 0x00000000, 0x0a000592, 0x00000000, 0x8f620008, + 0x8f630000, 0x24020030, 0x00031e02, 0x306300f0, 0x10620007, 0x28620031, + 0x14400031, 0x24020040, 0x10620007, 0x00000000, 0x0a000592, 0x00000000, + 0x0e0002dd, 0x00000000, 0x0a000592, 0x00000000, 0x0e0003b8, 0x00000000, + 0x0a000592, 0x00000000, 0x30820040, 0x1440002d, 0x00000000, 0x0000000d, + 0x00000000, 0x240004a6, 0x0a00059d, 0x00000000, 0x8f430100, 0x24020d00, + 0x1462000f, 0x30820006, 0x97420104, 0x10400005, 0x30820040, 0x0e0004e9, + 0x00000000, 0x0a000592, 0x00000000, 0x1440001b, 0x00000000, 0x0000000d, + 0x00000000, 0x240004b8, 0x0a00059d, 0x00000000, 0x1040000e, 0x30821000, + 0x10400005, 0x00000000, 0x0e00065d, 0x00000000, 0x0a000592, 0x00000000, + 0x0e00046b, 0x00000000, 0x8f820040, 0x24420001, 0xaf820040, 0x0a00059d, + 0x00000000, 0x30820040, 0x14400004, 0x00000000, 0x0000000d, 0x00000000, + 0x240004cf, 0x8f420138, 0x3c034000, 0x00431025, 0xaf420138, 0x0a00053f, + 0x00000000, 0x3c046008, 0x8c835000, 0x3c1a8000, 0x2402ff7f, 0x375b4000, + 0x00621824, 0x3463380c, 0xac835000, 0x8f420008, 0x3c056000, 0x3c03601c, + 0x34420001, 0xaf420008, 0x37428000, 0xaf800028, 0xaf82001c, 0xaf400080, + 0xaf400084, 0x8c660008, 0x8ca20808, 0x3c040800, 0x3c030080, 0xac830820, + 0x3042fff0, 0x38420010, 0x2c420001, 0xaf860004, 0xaf820008, 0x03e00008, + 0x00000000, 0x3084ffff, 0x30820007, 0x10400002, 0x24820007, 0x3044fff8, + 0x8f820028, 0x00441821, 0x30631fff, 0x24644000, 0x0344d821, 0xaf820018, + 0xaf830028, 0x03e00008, 0xaf430084, 0x3084ffff, 0x30820007, 0x10400002, + 0x24820007, 0x3044fff8, 0x8f820044, 0x8f830004, 0x00442021, 0xaf82002c, + 0x0083102b, 0xaf840044, 0x14400002, 0x00831023, 0xaf820044, 0x8f820044, + 0x34038000, 0x00431821, 0x03432021, 0xaf84001c, 0x03e00008, 0xaf420080, + 0x8f830034, 0x24020002, 0x30630006, 0x1062000d, 0x2c620003, 0x50400005, + 0x24020004, 0x10600012, 0x3c020001, 0x0a000601, 0x00000000, 0x10620007, + 0x24020006, 0x1462000f, 0x3c020111, 0x0a0005f9, 0x00821025, 0x0a0005f8, + 0x3c020101, 0x3c020011, 0x00821025, 0x24030001, 0xaf421000, 0xaf830030, + 0x0a000601, 0x00000000, 0x00821025, 0xaf421000, 0xaf800030, 0x00000000, + 0x00000000, 0x00000000, 0x03e00008, 0x00000000, 0x8f820030, 0x10400005, + 0x3c038000, 0x8f421000, 0x00431024, 0x1040fffd, 0x00000000, 0x03e00008, + 0x00000000, 0x8f820034, 0x27bdffe8, 0x30424000, 0x14400005, 0xafbf0010, + 0x0e00022d, 0x00000000, 0x0a00062d, 0x8fbf0010, 0x8f620008, 0x8f630000, + 0x24020030, 0x00031e02, 0x306300f0, 0x10620008, 0x28620031, 0x1440000d, + 0x8fbf0010, 0x24020040, 0x10620007, 0x00000000, 0x0a00062d, 0x00000000, + 0x0e0002dd, 0x00000000, 0x0a00062d, 0x8fbf0010, 0x0e0003b8, 0x00000000, + 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x8f84003c, 0x1080000f, 0x3c026000, + 0x8c430c3c, 0x30630fff, 0xaf830014, 0x14600011, 0x3082000f, 0x10400005, + 0x308200f0, 0x10400003, 0x30820f00, 0x14400006, 0x00000000, 0x0000000d, + 0x00000000, 0x2400050e, 0x03e00008, 0x00000000, 0x0000000d, 0x00000000, + 0x24000513, 0x03e00008, 0x00000000, 0xaf83003c, 0x03e00008, 0x00000000, + 0x10c00007, 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000, + 0x14c0fffb, 0x24840004, 0x03e00008, 0x00000000, 0x0a000659, 0x00a01021, + 0xac860000, 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff, 0x03e00008, + 0x00000000, 0x0000000d, 0x03e00008, 0x00000000, 0x3c040800, 0x8c82084c, + 0x54400007, 0xac80084c, 0x8f820034, 0x24030400, 0x30420c00, 0x1443005b, + 0x00000000, 0xac80084c, 0x0000000d, 0x00000000, 0x2400003c, 0x3c026000, + 0x8c444448, 0x3c030800, 0xac640850, 0x24000043, 0x97420104, 0x3045ffff, + 0x000530c2, 0x24a2007f, 0x000239c2, 0x2400004e, 0x3c046020, 0x24030020, + 0xac830000, 0x8c820000, 0x30420020, 0x10400005, 0x3c036020, 0x8c620000, + 0x30420020, 0x1440fffd, 0x00000000, 0x3c026020, 0x8c430010, 0x24040001, + 0x0087102b, 0x30ea007f, 0x24abfffe, 0x10400010, 0x00034240, 0x3c056020, + 0x24090020, 0xaca90000, 0x8ca20000, 0x30420020, 0x10400006, 0x24840001, + 0x3c036020, 0x8c620000, 0x30420020, 0x1440fffd, 0x00000000, 0x0087102b, + 0x1440fff4, 0x00000000, 0x8f85001c, 0x3c026020, 0x8c430010, 0x3c046020, + 0x34848000, 0x006a1825, 0x01034025, 0x2400006b, 0x10c0000b, 0x00000000, + 0x8ca30000, 0x24a50004, 0x8ca20000, 0x24a50004, 0x24c6ffff, 0xac820000, + 0x24840004, 0xac830000, 0x14c0fff7, 0x24840004, 0x24000077, 0x3c020007, + 0x34427700, 0x3c036000, 0xac6223c8, 0xac6b23cc, 0xac6823e4, 0x24000086, + 0x3c046000, 0x3c038000, 0x8c8223f8, 0x00431024, 0x1440fffd, 0x3c021000, + 0x3c056000, 0x24030019, 0xaca223f8, 0xa743014a, 0x8ca44448, 0x3c020800, + 0xac440854, 0x03e00008, 0x00000000, 0x00000000 }; + +static u32 bnx2_TPAT_b06FwData[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_TPAT_b06FwRodata[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_TPAT_b06FwBss[(0x80/4) + 1] = { 0x00000000 }; +static u32 bnx2_TPAT_b06FwSbss[(0x48/4) + 1] = { 0x00000000 }; + +static int bnx2_TXP_b06FwReleaseMajor = 0x0; +static int bnx2_TXP_b06FwReleaseMinor = 0x0; +static int bnx2_TXP_b06FwReleaseFix = 0x0; +static u32 bnx2_TXP_b06FwStartAddr = 0x08002090; +static u32 bnx2_TXP_b06FwTextAddr = 0x08000000; +static int bnx2_TXP_b06FwTextLen = 0x3ffc; +static u32 bnx2_TXP_b06FwDataAddr = 0x08004020; +static int bnx2_TXP_b06FwDataLen = 0x0; +static u32 bnx2_TXP_b06FwRodataAddr = 0x00000000; +static int bnx2_TXP_b06FwRodataLen = 0x0; +static u32 bnx2_TXP_b06FwBssAddr = 0x08004060; +static int bnx2_TXP_b06FwBssLen = 0x194; +static u32 bnx2_TXP_b06FwSbssAddr = 0x08004020; +static int bnx2_TXP_b06FwSbssLen = 0x34; +static u32 bnx2_TXP_b06FwText[(0x3ffc/4) + 1] = { + 0x0a000824, 0x00000000, 0x00000000, 0x0000000d, 0x74787020, 0x302e362e, + 0x39000000, 0x00060900, 0x0000000a, 0x000003e8, 0x0000ea60, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x10000003, 0x00000000, 0x0000000d, + 0x0000000d, 0x3c020800, 0x24424020, 0x3c030800, 0x246341f4, 0xac400000, + 0x0043202b, 0x1480fffd, 0x24420004, 0x3c1d0800, 0x37bd7ffc, 0x03a0f021, + 0x3c100800, 0x26102090, 0x3c1c0800, 0x279c4020, 0x0e000a0e, 0x00000000, + 0x0000000d, 0x8f840014, 0x27bdffe8, 0xafb00010, 0x8f460104, 0x8f830008, + 0x8c8500ac, 0xaf430080, 0x948200a8, 0xa7420e10, 0x948300aa, 0xa7430e12, + 0x8c8200ac, 0xaf420e18, 0x97430e10, 0xa7430e14, 0x97420e12, 0xa7420e16, + 0x8f430e18, 0x00005021, 0x00c53023, 0x10c001a3, 0xaf430e1c, 0x240f0800, + 0x3c0e1000, 0x2419fff8, 0x24100010, 0x3c188100, 0x93620008, 0x10400009, + 0x00000000, 0x97620010, 0x00c2102b, 0x14400005, 0x00000000, 0x97620010, + 0x3042ffff, 0x0a000862, 0xaf420e00, 0xaf460e00, 0x8f420000, 0x30420008, + 0x1040fffd, 0x00000000, 0x97420e08, 0x8f450e04, 0x3044ffff, 0x30820001, + 0x14400005, 0x00000000, 0x14a00005, 0x3083a040, 0x0a0009e6, 0x00000000, + 0x0000000d, 0x3083a040, 0x24020040, 0x14620049, 0x3082a000, 0x8f87000c, + 0x30880036, 0x30890008, 0xaf4f0178, 0x00e01821, 0x9742008a, 0x00431023, + 0x2442ffff, 0x30421fff, 0x2c420008, 0x1440fffa, 0x00000000, 0x8f830018, + 0x00a05021, 0x00c53023, 0x24e24000, 0x03422821, 0x306b00ff, 0x24630001, + 0xaf830018, 0x93840012, 0x000b1400, 0x3c030100, 0x00431025, 0xaca20000, + 0x8f820018, 0x30840007, 0x00042240, 0x34870001, 0x00e83825, 0x1120000f, + 0xaca20004, 0x97430e0a, 0x8f84000c, 0x00ee3825, 0x2402000e, 0x00781825, + 0xaf430160, 0x25430006, 0x24840008, 0x30841fff, 0xa742015a, 0xa7430158, + 0xaf84000c, 0x0a0008a9, 0x00000000, 0x8f83000c, 0x25420002, 0xa7420158, + 0x24630008, 0x30631fff, 0xaf83000c, 0x54c0000c, 0x8f420e14, 0x97420e10, + 0x97430e12, 0x8f840014, 0x00021400, 0x00621825, 0xac8300a8, 0x8f850014, + 0x8f420e18, 0x34e70040, 0xaca200ac, 0x8f420e14, 0x8f430e1c, 0xaf420144, + 0xaf430148, 0xa34b0152, 0xaf470154, 0x0a0009f1, 0xaf4e0178, 0x10400128, + 0x00000000, 0x97620010, 0x00a2102b, 0x10400003, 0x30820040, 0x10400122, + 0x00000000, 0xafa60008, 0xa7840010, 0xaf850004, 0x93620008, 0x1440005e, + 0x27ac0008, 0xaf60000c, 0x97820010, 0x30424000, 0x10400002, 0x2403000e, + 0x24030016, 0xa363000a, 0x24034007, 0xaf630014, 0x93820012, 0x8f630014, + 0x30420007, 0x00021240, 0x00621825, 0xaf630014, 0x97820010, 0x8f630014, + 0x30420010, 0x00621825, 0xaf630014, 0x97820010, 0x30420008, 0x5040000e, + 0x00002821, 0x8f620014, 0x004e1025, 0xaf620014, 0x97430e0a, 0x2402000e, + 0x00781825, 0xaf630004, 0xa3620002, 0x9363000a, 0x3405fffc, 0x24630004, + 0x0a0008f2, 0xa363000a, 0xaf600004, 0xa3600002, 0x97820010, 0x9363000a, + 0x30421f00, 0x00021182, 0x24420028, 0x00621821, 0xa3630009, 0x97420e0c, + 0xa7620010, 0x93630009, 0x24020008, 0x24630002, 0x30630007, 0x00431023, + 0x30420007, 0xa362000b, 0x93640009, 0x97620010, 0x8f890004, 0x97830010, + 0x00441021, 0x00a21021, 0x30630040, 0x10600006, 0x3045ffff, 0x15250005, + 0x0125102b, 0x3c068000, 0x0a000925, 0x00005821, 0x0125102b, 0x144000c8, + 0x00005021, 0x97420e14, 0xa7420e10, 0x97430e16, 0xa7430e12, 0x8f420e1c, + 0xaf420e18, 0xaf450e00, 0x8f420000, 0x30420008, 0x1040fffd, 0x00000000, + 0x97420e08, 0x00a04821, 0xa7820010, 0x8f430e04, 0x00003021, 0x240b0001, + 0xaf830004, 0x97620010, 0x0a000936, 0x304dffff, 0x8f890004, 0x97820010, + 0x30420040, 0x10400004, 0x01206821, 0x3c068000, 0x0a000936, 0x00005821, + 0x97630010, 0x8f820004, 0x144300a7, 0x00005021, 0x00003021, 0x240b0001, + 0x8d820000, 0x00491023, 0x1440000d, 0xad820000, 0x8f620014, 0x34420040, + 0xaf620014, 0x97430e10, 0x97420e12, 0x8f840014, 0x00031c00, 0x00431025, + 0xac8200a8, 0x8f830014, 0x8f420e18, 0xac6200ac, 0x93620008, 0x1440003f, + 0x00000000, 0x25260002, 0x8f84000c, 0x9743008a, 0x3063ffff, 0xafa30000, + 0x8fa20000, 0x00441023, 0x2442ffff, 0x30421fff, 0x2c420010, 0x1440fff7, + 0x00000000, 0x8f82000c, 0x8f830018, 0x00021082, 0x00021080, 0x24424000, + 0x03422821, 0x00605021, 0x24630001, 0x314200ff, 0x00021400, 0xaf830018, + 0x3c033200, 0x00431025, 0xaca20000, 0x93630009, 0x9362000a, 0x00031c00, + 0x00431025, 0xaca20004, 0x8f830018, 0xaca30008, 0x97820010, 0x30420008, + 0x10400002, 0x00c04021, 0x25280006, 0x97430e14, 0x93640002, 0x8f450e1c, + 0x8f660004, 0x8f670014, 0xaf4f0178, 0x3063ffff, 0xa7430144, 0x97420e16, + 0xa7420146, 0xaf450148, 0xa34a0152, 0x8f82000c, 0x308400ff, 0xa744015a, + 0xaf460160, 0xa7480158, 0xaf470154, 0xaf4e0178, 0x00501021, 0x30421fff, + 0xaf82000c, 0x0a0009c5, 0x8d820000, 0x93620009, 0x9363000b, 0x8f85000c, + 0x2463000a, 0x00435021, 0x25440007, 0x00992024, 0x9743008a, 0x3063ffff, + 0xafa30000, 0x8fa20000, 0x00451023, 0x2442ffff, 0x30421fff, 0x0044102b, + 0x1440fff7, 0x00000000, 0x8f82000c, 0x8f840018, 0x00021082, 0x00021080, + 0x24424000, 0x03422821, 0x00804021, 0x24840001, 0xaf840018, 0x93630009, + 0x310200ff, 0x00022400, 0x3c024100, 0x24630002, 0x00621825, 0x00832025, + 0xaca40000, 0x8f62000c, 0x00461025, 0xaca20004, 0x97430e14, 0x93640002, + 0x8f450e1c, 0x8f660004, 0x8f670014, 0xaf4f0178, 0x3063ffff, 0xa7430144, + 0x97420e16, 0x308400ff, 0xa7420146, 0xaf450148, 0xa3480152, 0x8f83000c, + 0x25420007, 0x00591024, 0xa744015a, 0xaf460160, 0xa7490158, 0xaf470154, + 0xaf4e0178, 0x00621821, 0x30631fff, 0xaf83000c, 0x8d820000, 0x14400005, + 0x00000000, 0x8f620014, 0x2403ffbf, 0x00431024, 0xaf620014, 0x8f62000c, + 0x004d1021, 0xaf62000c, 0x93630008, 0x14600008, 0x00000000, 0x11600006, + 0x00000000, 0x8f630014, 0x3c02efff, 0x3442fffe, 0x00621824, 0xaf630014, + 0xa36b0008, 0x01205021, 0x15400016, 0x8fa60008, 0x97420e14, 0x97430e16, + 0x8f850014, 0x00021400, 0x00621825, 0xaca300a8, 0x8f840014, 0x8f420e1c, + 0x0a0009f3, 0xac8200ac, 0x97420e14, 0x97430e16, 0x8f840014, 0x00021400, + 0x00621825, 0xac8300a8, 0x8f850014, 0x8f420e1c, 0x00005021, 0x0a0009f3, + 0xaca200ac, 0x14c0fe64, 0x00000000, 0x55400018, 0x8fb00010, 0x3c038000, + 0x8f420178, 0x00431024, 0x1440fffd, 0x00000000, 0x97430e14, 0x8f440e1c, + 0x24020800, 0xaf420178, 0x3063ffff, 0xa7430144, 0x97420e16, 0x3c031000, + 0xa7420146, 0x24020240, 0xaf440148, 0xa3400152, 0xa740015a, 0xaf400160, + 0xa7400158, 0xaf420154, 0xaf430178, 0x8fb00010, 0x03e00008, 0x27bd0018, + 0x27bdffd8, 0x3c1a8000, 0x3c0420ff, 0x3484fffd, 0x3c020008, 0x03421821, + 0xafbf0020, 0xafb3001c, 0xafb20018, 0xafb10014, 0xafb00010, 0xaf830014, + 0xaf440e00, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x3c0200ff, 0x3442fffd, 0x3c046004, 0xaf420e00, 0x8c835000, 0x24130d00, + 0x3c120800, 0x3c114000, 0x2402ff7f, 0x00621824, 0x3463380c, 0x24020009, + 0xac835000, 0xaf420008, 0xaf800018, 0xaf80000c, 0x0e000fa1, 0x00000000, + 0x0e000a96, 0x00000000, 0x3c020800, 0x24504080, 0x8f420000, 0x30420001, + 0x1040fffd, 0x00000000, 0x8f440100, 0xaf840008, 0xaf440020, 0x93430108, + 0xa3830012, 0x93820012, 0x30420001, 0x10400008, 0x00000000, 0x93820012, + 0x30420006, 0x00021100, 0x0e00083b, 0x0050d821, 0x0a000a52, 0x00000000, + 0x14930005, 0x00000000, 0x0e00083b, 0x265b4100, 0x0a000a52, 0x00000000, + 0x0e000ba3, 0x00000000, 0xaf510138, 0x0a000a36, 0x00000000, 0x27bdfff8, + 0x3084ffff, 0x24820007, 0x3044fff8, 0x8f85000c, 0x9743008a, 0x3063ffff, + 0xafa30000, 0x8fa20000, 0x00451023, 0x2442ffff, 0x30421fff, 0x0044102b, + 0x1440fff7, 0x00000000, 0x8f82000c, 0x00021082, 0x00021080, 0x24424000, + 0x03421021, 0x03e00008, 0x27bd0008, 0x3084ffff, 0x8f82000c, 0x24840007, + 0x3084fff8, 0x00441021, 0x30421fff, 0xaf82000c, 0x03e00008, 0x00000000, + 0x27bdffe8, 0x3c1a8000, 0x3c0420ff, 0x3484fffd, 0x3c020008, 0x03421821, + 0xafbf0010, 0xaf830014, 0xaf440e00, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x3c0200ff, 0x3442fffd, 0x3c046004, 0xaf420e00, + 0x8c825000, 0x2403ff7f, 0x00431024, 0x3442380c, 0x24030009, 0xac825000, + 0xaf430008, 0xaf800018, 0xaf80000c, 0x0e000fa1, 0x00000000, 0x0e000a96, + 0x00000000, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0x3c02000a, + 0x03421821, 0x3c040800, 0x24844120, 0x24050018, 0xafbf0010, 0xaf830024, + 0x0e000fad, 0x00003021, 0x3c050800, 0x3c020800, 0x24423d60, 0xaca24180, + 0x24a54180, 0x3c020800, 0x24423e18, 0x3c030800, 0x24633e2c, 0x3c040800, + 0xaca20004, 0x3c020800, 0x24423d68, 0xaca30008, 0xac824190, 0x24844190, + 0x3c020800, 0x24423da4, 0x3c070800, 0x24e73de4, 0x3c060800, 0x24c63e40, + 0x3c050800, 0x24a52b28, 0x3c030800, 0xac820004, 0x3c020800, 0x24423e48, + 0xac870008, 0xac86000c, 0xac850010, 0xac6241b0, 0x246341b0, 0x8fbf0010, + 0x3c020800, 0x24423e60, 0xac620004, 0xac670008, 0xac66000c, 0xac650010, + 0x03e00008, 0x27bd0018, 0x27bdffc8, 0x3c020800, 0x24424120, 0xafbf0030, + 0xafb3002c, 0xafb20028, 0xafb10024, 0xafb00020, 0x90470021, 0x8c510008, + 0x8c45001c, 0x8f900020, 0x3c060800, 0x3c038000, 0x8f420178, 0x00431024, + 0x1440fffd, 0x8cc2414c, 0x24c3414c, 0x2473ffd4, 0xaf420144, 0x8e620030, + 0x30b22000, 0xaf420148, 0x3c021000, 0xaf50014c, 0xa3470152, 0xa7510158, + 0xaf450154, 0xaf420178, 0x12400004, 0x3c030800, 0x8c620030, 0x24420001, + 0xac620030, 0x93420109, 0x9344010a, 0x00111c00, 0xafa30018, 0x00071a00, + 0xafa50014, 0x8cc5414c, 0x00021600, 0x00042400, 0x00441025, 0x00431025, + 0xafa20010, 0x8f440100, 0x8e660030, 0x0e000fe1, 0x02003821, 0x1640000e, + 0x8fbf0030, 0x8f820000, 0x8e630030, 0x8c44017c, 0x02031823, 0x00711823, + 0x00641823, 0x2c630002, 0x14600006, 0x8fb3002c, 0x0000000d, 0x00000000, + 0x240000ca, 0x8fbf0030, 0x8fb3002c, 0x8fb20028, 0x8fb10024, 0x8fb00020, + 0x03e00008, 0x27bd0038, 0x974309da, 0x00804021, 0xad030000, 0x8f4209dc, + 0xad020004, 0x8f4309e0, 0xad030008, 0x934409d9, 0x24020001, 0x30840003, + 0x1082001f, 0x30a900ff, 0x28820002, 0x10400005, 0x24020002, 0x10800009, + 0x3c0a0800, 0x0a000b64, 0x93420934, 0x1082000b, 0x24020003, 0x10820026, + 0x3c0a0800, 0x0a000b64, 0x93420934, 0x974209e4, 0x00021400, 0x34420800, + 0xad02000c, 0x0a000b63, 0x25080010, 0x974209e4, 0x00021400, 0x34428100, + 0xad02000c, 0x974309e8, 0x3c0a0800, 0x00031c00, 0x34630800, 0xad030010, + 0x0a000b63, 0x25080014, 0x974409e4, 0x3c050800, 0x24a24120, 0x94430018, + 0x94460010, 0x9447000c, 0x00a05021, 0x24020800, 0xad000010, 0xad020014, + 0x00042400, 0x00661821, 0x00671823, 0x2463fff2, 0x00832025, 0xad04000c, + 0x0a000b63, 0x25080018, 0x974209e4, 0x3c050800, 0x00021400, 0x34428100, + 0xad02000c, 0x974409e8, 0x24a24120, 0x94430018, 0x94460010, 0x9447000c, + 0x00a05021, 0x24020800, 0xad000014, 0xad020018, 0x00042400, 0x00661821, + 0x00671823, 0x2463ffee, 0x00832025, 0xad040010, 0x2508001c, 0x93420934, + 0x93450921, 0x3c074000, 0x25444120, 0x94830014, 0x94860010, 0x00021082, + 0x00021600, 0x00052c00, 0x00a72825, 0x00451025, 0x00661821, 0x00431025, + 0xad020000, 0x97830028, 0x974209ea, 0x00621821, 0x00031c00, 0xad030004, + 0x97820028, 0x24420001, 0x30427fff, 0xa7820028, 0x93430920, 0x3c020006, + 0x00031e00, 0x00621825, 0xad030008, 0x8f42092c, 0xad02000c, 0x8f430930, + 0xad030010, 0x8f440938, 0x25080014, 0xad040000, 0x8f820020, 0x11200004, + 0xad020004, 0x8f420940, 0x0a000b8d, 0x2442ffff, 0x8f420940, 0xad020008, + 0x8f440948, 0x8f420940, 0x93430936, 0x00822823, 0x00652806, 0x3402ffff, + 0x0045102b, 0x54400001, 0x3405ffff, 0x93420937, 0x25444120, 0x90830020, + 0xad000010, 0x00021700, 0x34630010, 0x00031c00, 0x00431025, 0x00451025, + 0xad02000c, 0x03e00008, 0x25020014, 0x27bdffb0, 0x3c020008, 0x03421821, + 0xafbf004c, 0xafbe0048, 0xafb70044, 0xafb60040, 0xafb5003c, 0xafb40038, + 0xafb30034, 0xafb20030, 0xafb1002c, 0xafb00028, 0xaf830000, 0x24020040, + 0xaf420814, 0xaf400810, 0x8f420944, 0x8f430950, 0x8f440954, 0x8f45095c, + 0xaf820030, 0xaf830020, 0xaf84001c, 0xaf85002c, 0x93430900, 0x24020020, + 0x10620005, 0x24020030, 0x10620022, 0x3c030800, 0x0a000bf1, 0x8c62002c, + 0x24020088, 0xaf420818, 0x3c020800, 0x24424180, 0xafa20020, 0x93430109, + 0x3c020800, 0x10600009, 0x24574190, 0x3c026000, 0x24030100, 0xac43081c, + 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x2400031d, 0x9342010a, + 0x30420080, 0x1440001c, 0x00000000, 0x3c026000, 0x24030100, 0xac43081c, + 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x24000324, 0x0a000bf4, + 0x00000000, 0x93430109, 0x3063007f, 0x00031140, 0x000318c0, 0x00431021, + 0x24430088, 0xaf430818, 0x0000000d, 0x3c020800, 0x244241d0, 0x3c030800, + 0x247741e0, 0x0a000bf4, 0xafa20020, 0x24420001, 0x0a000f4c, 0xac62002c, + 0x8f840000, 0x8f850020, 0x24020800, 0xaf420178, 0x8f4209a4, 0x8c83017c, + 0x00a21023, 0x00431023, 0x2c420002, 0x14400004, 0x00000000, 0x0000000d, + 0x00000000, 0x24000349, 0x8f420104, 0x8f430988, 0x00431023, 0x58400005, + 0x8f4209a0, 0x0000000d, 0x00000000, 0x2400034d, 0x8f4209a0, 0x3c100800, + 0xae02414c, 0x8f4309a4, 0x2604414c, 0x2491ffd4, 0xae230030, 0x8f420104, + 0xae250024, 0x00431023, 0xac82ffd4, 0x8fa30020, 0x8c620000, 0x0040f809, + 0x0200b021, 0x00409021, 0x32440010, 0x32420002, 0x10400007, 0xafa40024, + 0x8e22001c, 0x32500040, 0x2403ffbf, 0x00431024, 0x0a000f13, 0xae22001c, + 0x32420020, 0x10400002, 0x3c020800, 0x245741b0, 0x32420001, 0x14400007, + 0x00000000, 0x8f820008, 0xaf420080, 0x8ec3414c, 0xaf430e10, 0x8e220030, + 0xaf420e18, 0x9343010b, 0x93420905, 0x30420008, 0x1040003c, 0x307400ff, + 0x8f820000, 0x8c430074, 0x0460000a, 0x00000000, 0x3c026000, 0x24030100, + 0xac43081c, 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x24000384, + 0x8f820000, 0x9044007b, 0x9343010a, 0x14830027, 0x32500040, 0x24072000, + 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024, 0x1440fffd, 0x8ec2414c, + 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030, 0x3c030100, 0xaf420148, + 0x24020047, 0xaf43014c, 0x00001821, 0xa3420152, 0x3c021000, 0xa7430158, + 0xaf470154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030, 0x24630001, + 0xad230030, 0x93420109, 0x9343010a, 0xafa70014, 0xafa00018, 0x00021600, + 0x00031c00, 0x00431025, 0x34424700, 0xafa20010, 0x8f440100, 0x0e000fe1, + 0x3c070100, 0x3c030800, 0x24624120, 0x0a000d01, 0x8c43001c, 0x32820002, + 0x10400047, 0x3c039000, 0x34630001, 0x8f820008, 0x32500040, 0x3c048000, + 0x00431025, 0xaf420020, 0x8f420020, 0x00441024, 0x1440fffd, 0x00000000, + 0x8f830000, 0x90620005, 0x3c058000, 0x34420008, 0xa0620005, 0x8f860000, + 0x34a50001, 0x8f840008, 0x8cc20074, 0x3c038000, 0x00852025, 0x00431025, + 0xacc20074, 0xaf440020, 0x90c3007b, 0x9342010a, 0x14620028, 0x3c040800, + 0x24072000, 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024, 0x1440fffd, + 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030, 0x3c030100, + 0xaf420148, 0x24020046, 0xaf43014c, 0x00001821, 0xa3420152, 0x3c021000, + 0xa7430158, 0xaf470154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030, + 0x24630001, 0xad230030, 0x93420109, 0x9343010a, 0xafa70014, 0xafa00018, + 0x00021600, 0x00031c00, 0x00431025, 0x34424600, 0xafa20010, 0x8f440100, + 0x0e000fe1, 0x3c070100, 0x3c040800, 0x24824120, 0x0a000d01, 0x8c43001c, + 0x93420108, 0x30420010, 0x50400050, 0x9343093f, 0x8f860000, 0x90c3007f, + 0x90c2007e, 0x90c40080, 0x306800ff, 0x00021600, 0x00081c00, 0x00431025, + 0x00042200, 0x90c3007a, 0x90c5000a, 0x00441025, 0x11050028, 0x00623825, + 0xa0c8000a, 0x24086000, 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024, + 0x1440fffd, 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030, + 0x00001821, 0xaf420148, 0x24020052, 0xaf47014c, 0xa3420152, 0x3c021000, + 0xa7430158, 0xaf480154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030, + 0x24630001, 0xad230030, 0x93420109, 0x9343010a, 0xafa80014, 0xafa00018, + 0x00021600, 0x00031c00, 0x00431025, 0x34425200, 0xafa20010, 0x0e000fe1, + 0x8f440100, 0x0a000cfb, 0x00000000, 0x3c026000, 0x24030100, 0xac43081c, + 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x240003cd, 0x16800009, + 0x3c040800, 0x3c030800, 0x24624120, 0x8c43001c, 0x32500040, 0x2404ffbf, + 0x00641824, 0x0a000f13, 0xac43001c, 0x8c824120, 0x10400005, 0x3c030800, + 0x8c620034, 0xac804120, 0x24420001, 0xac620034, 0x9343093f, 0x24020012, + 0x1462000f, 0x329e0038, 0x17c0000c, 0x3c030800, 0x8f830000, 0x8c62004c, + 0xac62005c, 0x3c020800, 0x24444120, 0x8c82001c, 0x32500040, 0x2403ffbf, + 0x00431024, 0x0a000f13, 0xac82001c, 0xac604120, 0x97420908, 0x000211c0, + 0xaf420024, 0x97420908, 0x3c030080, 0x34630003, 0x000211c0, 0xaf42080c, + 0xaf43081c, 0x974209ec, 0x8f4309a4, 0xa7820028, 0x3c020800, 0x24444120, + 0xac830028, 0x93420937, 0x93430934, 0x00021080, 0x00621821, 0xa4830014, + 0x934209d8, 0x00621821, 0xa4830016, 0x934209d8, 0x93430934, 0x00809821, + 0x00431021, 0x24420010, 0xa4820012, 0x0000a821, 0x24020006, 0x13c00003, + 0xae62001c, 0x0a000d82, 0x24120008, 0x8f420958, 0x8f830020, 0x8f84002c, + 0x00431023, 0x00832023, 0x04800003, 0xae620004, 0x04410003, 0x0082102b, + 0x0a000d4e, 0xae600004, 0x54400001, 0xae640004, 0x8ee20000, 0x0040f809, + 0x00000000, 0x00409021, 0x32420001, 0x5440001e, 0x8ee20004, 0x8e630008, + 0x1060002b, 0x3c02c000, 0x00621025, 0xaf420e00, 0x8f420000, 0x30420008, + 0x1040fffd, 0x00000000, 0x97420e08, 0xa7820010, 0x8f430e04, 0x8e620008, + 0xaf830004, 0x8f840004, 0x0044102b, 0x1040000b, 0x24150001, 0x24020100, + 0x3c016000, 0xac22081c, 0x3c020001, 0x3c016000, 0xac22081c, 0x0000000d, + 0x00000000, 0x24000449, 0x24150001, 0x8ee20004, 0x0040f809, 0x00000000, + 0x02429025, 0x32420002, 0x5040001d, 0x8f470940, 0x12a00006, 0x8ec2414c, + 0x8f830000, 0xac6200a8, 0x8f840000, 0x8e620030, 0xac8200ac, 0x32420004, + 0x50400013, 0x8f470940, 0x3c020800, 0x3283007d, 0x106000fe, 0x245741b0, + 0x32820001, 0x50400006, 0x36520002, 0x8f830030, 0x8f420940, 0x106200f7, + 0x00000000, 0x36520002, 0x24020008, 0xa660000c, 0xa662000e, 0xae600008, + 0xa2600020, 0x8f470940, 0x3c030800, 0x24684120, 0x8d020028, 0x8d050008, + 0x9504000c, 0x9506000a, 0x95030022, 0x00451021, 0x00862021, 0x00641821, + 0xaf870030, 0xad020028, 0x32820030, 0x10400006, 0xa5030010, 0x91020020, + 0x32910040, 0x34420004, 0x0a000dd4, 0xa1020020, 0x93420923, 0x30420040, + 0x10400029, 0x32910040, 0x8f830000, 0x8f840020, 0x8c620084, 0x00441023, + 0x0442000a, 0x3c039000, 0x95020010, 0x8c630084, 0x00821021, 0x00621823, + 0x1c600004, 0x3c039000, 0x91020020, 0x34420001, 0xa1020020, 0x34630001, + 0x8f820008, 0x32910040, 0x3c048000, 0x00431025, 0xaf420020, 0x8f420020, + 0x00441024, 0x1440fffd, 0x00000000, 0x8f840000, 0x9083003f, 0x2402000a, + 0x10620005, 0x2402000c, 0x9083003f, 0x24020008, 0x14620002, 0x24020014, + 0xa082003f, 0x8f830008, 0x3c028000, 0x34420001, 0x00621825, 0xaf430020, + 0x3c040800, 0x24904120, 0x9602000c, 0x96030016, 0x9604000e, 0x00431021, + 0x00442021, 0x24840002, 0x3084ffff, 0x0e000a55, 0xa6020018, 0x8f850018, + 0x00a01821, 0xa2030021, 0x8ee60008, 0x00402021, 0x24a50001, 0xaf850018, + 0x00c0f809, 0x00000000, 0x00402021, 0x0e000b12, 0x02202821, 0x8ee3000c, + 0x0060f809, 0x00402021, 0x96040018, 0x9602000e, 0x00822021, 0x24840002, + 0x0e000a6b, 0x3084ffff, 0x3c030800, 0x8c624120, 0x8e030008, 0x3c040800, + 0x00431023, 0x14400012, 0xac824120, 0x54600006, 0x8e02001c, 0x3243004a, + 0x24020002, 0x14620005, 0x00000000, 0x8e02001c, 0x34420040, 0x0a000e0b, + 0xae02001c, 0x52a00006, 0x36520002, 0x8e02002c, 0xaf420e10, 0x8e030030, + 0xaf430e18, 0x36520002, 0x52a00008, 0x96670010, 0x8f830000, 0x8f420e10, + 0xac6200a8, 0x8f840000, 0x8f420e18, 0xac8200ac, 0x96670010, 0x92680020, + 0x24020040, 0xaf420814, 0x8f830020, 0x8f82001c, 0x00671821, 0x00621023, + 0xaf830020, 0x58400005, 0x8f42095c, 0x8f820000, 0xaf83001c, 0xac430054, + 0x8f42095c, 0x31030008, 0xaf82002c, 0x1060001a, 0x00000000, 0x8f840000, + 0x90820120, 0x90830121, 0x304600ff, 0x00c31823, 0x30630007, 0x24020007, + 0x1062000e, 0x00000000, 0x90820122, 0x304200fe, 0xa0820122, 0x8f850000, + 0x00061880, 0x8f840020, 0x24a20100, 0x00431021, 0x24c30001, 0x30630007, + 0xac440000, 0x0a000e40, 0xa0a30120, 0x90820122, 0x34420001, 0xa0820122, + 0x14e00003, 0x31020001, 0x10400031, 0x32510002, 0x8f820000, 0x8c43000c, + 0x30630001, 0x1060002c, 0x32510002, 0x3c029000, 0x8f830008, 0x34420001, + 0x3c048000, 0x00621825, 0xaf430020, 0x8f420020, 0x00441024, 0x1440fffd, + 0x00000000, 0x8f870000, 0x8ce2000c, 0x30420001, 0x10400018, 0x00000000, + 0x94e2006a, 0x00022880, 0x50a00001, 0x24050001, 0x94e30068, 0x90e40081, + 0x3c020800, 0x8c460024, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, + 0x00a03021, 0x3c020800, 0x8c440028, 0x00c4182b, 0x54600001, 0x00c02021, + 0x8f430074, 0x2402fffe, 0x00822824, 0x00a31821, 0xace3000c, 0x8f830008, + 0x3c028000, 0x34420001, 0x00621825, 0xaf430020, 0x8f830020, 0x3c020800, + 0x24504120, 0xae030024, 0x8ee20010, 0x0040f809, 0x00000000, 0x12a00005, + 0x00000000, 0x8f420e10, 0xae02002c, 0x8f430e18, 0xae030030, 0x1220feba, + 0x0000a821, 0x8f870024, 0x97860028, 0x8f830000, 0x8f820030, 0x8f840020, + 0x8f85001c, 0x32500040, 0xa4e6002c, 0xac620044, 0x32420008, 0xac640050, + 0xac650054, 0x1040007a, 0x32820020, 0x10400027, 0x32910010, 0x24072000, + 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024, 0x1440fffd, 0x8ec2414c, + 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030, 0x3c030400, 0xaf420148, + 0x24020041, 0xaf43014c, 0x00001821, 0xa3420152, 0x3c021000, 0xa7430158, + 0xaf470154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030, 0x24630001, + 0xad230030, 0x93420109, 0x9343010a, 0xafa70014, 0xafa00018, 0x00021600, + 0x00031c00, 0x00431025, 0x34424100, 0xafa20010, 0x8f440100, 0x0e000fe1, + 0x3c070400, 0x12200028, 0x24072000, 0x3c090800, 0x3c038000, 0x8f420178, + 0x00431024, 0x1440fffd, 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144, + 0x8c820030, 0x3c030300, 0xaf420148, 0x2402004e, 0xaf43014c, 0x00001821, + 0xa3420152, 0x3c021000, 0xa7430158, 0xaf470154, 0xaf420178, 0x8ec5414c, + 0x8d230030, 0x8c860030, 0x24630001, 0xad230030, 0x93420109, 0x9343010a, + 0xafa70014, 0xafa00018, 0x00021600, 0x00031c00, 0x00431025, 0x34424e00, + 0xafa20010, 0x8f440100, 0x0e000fe1, 0x3c070300, 0x0a000f0b, 0x8fa30024, + 0x32820008, 0x10400026, 0x3c090800, 0x24072000, 0x3c038000, 0x8f420178, + 0x00431024, 0x1440fffd, 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144, + 0x8c820030, 0x3c030200, 0xaf420148, 0x2402004b, 0xaf43014c, 0x00001821, + 0xa3420152, 0x3c021000, 0xa7430158, 0xaf470154, 0xaf420178, 0x8ec5414c, + 0x8d230030, 0x8c860030, 0x24630001, 0xad230030, 0x93420109, 0x9343010a, + 0xafa70014, 0xafa00018, 0x00021600, 0x00031c00, 0x00431025, 0x34424b00, + 0xafa20010, 0x8f440100, 0x0e000fe1, 0x3c070200, 0x8fa30024, 0x14600004, + 0x8fa40020, 0x32420010, 0x10400004, 0x00000000, 0x8c820004, 0x0040f809, + 0x00000000, 0x12000006, 0x8fa30020, 0x8c620008, 0x0040f809, 0x00000000, + 0x0a000f4d, 0x8fbf004c, 0x3c030800, 0x8c62413c, 0x30420040, 0x1440002f, + 0x8fbf004c, 0x24040040, 0x8f910020, 0x3c038000, 0x8f420178, 0x00431024, + 0x1440fffd, 0x8ec2414c, 0x26d0414c, 0x2610ffd4, 0xaf420144, 0x8e020030, + 0x00001821, 0xaf420148, 0x24020049, 0xaf51014c, 0xa3420152, 0x3c021000, + 0xa7430158, 0xaf440154, 0xaf420178, 0x8ec5414c, 0x8e060030, 0x93420109, + 0x9343010a, 0xafa40014, 0xafa00018, 0x00021600, 0x00031c00, 0x00431025, + 0x34424900, 0xafa20010, 0x8f440100, 0x0e000fe1, 0x02203821, 0x8f830000, + 0x8e020030, 0x8c64017c, 0x02221023, 0x00441023, 0x2c420002, 0x14400005, + 0x8fbf004c, 0x0000000d, 0x00000000, 0x240000ca, 0x8fbf004c, 0x8fbe0048, + 0x8fb70044, 0x8fb60040, 0x8fb5003c, 0x8fb40038, 0x8fb30034, 0x8fb20030, + 0x8fb1002c, 0x8fb00028, 0x03e00008, 0x27bd0050, 0x03e00008, 0x00001021, + 0x3c030800, 0x24654120, 0x8ca40004, 0x8c634120, 0x0064102b, 0x54400001, + 0x00602021, 0x9743093c, 0x0083102b, 0x54400001, 0x00801821, 0x00001021, + 0xaca30008, 0x03e00008, 0xa4a00022, 0x8f850004, 0x97840010, 0x3c030800, + 0x24634120, 0x24020008, 0xa462000e, 0x8f820004, 0xa460000c, 0x000420c2, + 0x30840008, 0x2c420001, 0x00021023, 0x30420006, 0xac650008, 0x03e00008, + 0xa0640020, 0x3c020800, 0x24424120, 0x90450021, 0x94430018, 0x3c021100, + 0xac800004, 0x00052c00, 0x24630002, 0x00621825, 0x00a32825, 0x24820008, + 0x03e00008, 0xac850000, 0x0000000d, 0x00000000, 0x2400016f, 0x03e00008, + 0x00000000, 0x0000000d, 0x00000000, 0x2400017b, 0x03e00008, 0x00000000, + 0x03e00008, 0x00000000, 0x3c020800, 0x24424120, 0xac400008, 0xa4400022, + 0x03e00008, 0x24020001, 0x3c020800, 0x24424120, 0x24030008, 0xac400008, + 0xa440000c, 0xa443000e, 0xa0400020, 0x03e00008, 0x24020004, 0x03e00008, + 0x00001021, 0x10c00007, 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, + 0xac820000, 0x14c0fffb, 0x24840004, 0x03e00008, 0x00000000, 0x0a000fb2, + 0x00a01021, 0xac860000, 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff, + 0x03e00008, 0x00000000, 0x3c0a0800, 0x8d490068, 0x3c050800, 0x24a51090, + 0x00093140, 0x00c51021, 0xac440000, 0x8f440e04, 0x00a61021, 0xac440004, + 0x97430e08, 0x97420e0c, 0x00a62021, 0x00031c00, 0x00431025, 0xac820008, + 0x8f430e10, 0x00801021, 0xac43000c, 0x8f440e14, 0xac440010, 0x8f430e18, + 0x3c0800ff, 0xac430014, 0x8f470e1c, 0x3508ffff, 0x25290001, 0xac470018, + 0x3c070800, 0x8ce3006c, 0x9344010a, 0x3c026000, 0x24630001, 0xace3006c, + 0x8c434448, 0x3129007f, 0x00a62821, 0xad490068, 0x00042600, 0x00681824, + 0x00832025, 0x03e00008, 0xaca4001c, 0x8fac0010, 0x8fad0014, 0x8fae0018, + 0x3c0b0800, 0x8d6a0060, 0x3c080800, 0x25080078, 0x000a4940, 0x01281021, + 0x01091821, 0xac440000, 0x00601021, 0xac650004, 0xac460008, 0xac67000c, + 0xac4c0010, 0xac6d0014, 0x3c036000, 0xac4e0018, 0x8c654448, 0x3c040800, + 0x8c820064, 0x254a0001, 0x314a007f, 0x01094021, 0xad6a0060, 0x24420001, + 0xac820064, 0x03e00008, 0xad05001c, 0x00000000 }; + +static u32 bnx2_TXP_b06FwData[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_TXP_b06FwRodata[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_TXP_b06FwBss[(0x194/4) + 1] = { 0x00000000 }; +static u32 bnx2_TXP_b06FwSbss[(0x34/4) + 1] = { 0x00000000 }; + diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 770e28f98fd..269a5e40734 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3037,7 +3037,7 @@ static void bond_activebackup_arp_mon(struct net_device *bond_dev) bond_set_slave_inactive_flags(bond->current_arp_slave); /* search for next candidate */ - bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave) { + bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave->next) { if (IS_UP(slave->dev)) { slave->link = BOND_LINK_BACK; bond_set_slave_active_flags(slave); diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c new file mode 100644 index 00000000000..f4ba0ffb863 --- /dev/null +++ b/drivers/net/dm9000.c @@ -0,0 +1,1219 @@ +/* + * dm9000.c: Version 1.2 03/18/2003 + * + * A Davicom DM9000 ISA NIC fast Ethernet driver for Linux. + * Copyright (C) 1997 Sten Wang + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved. + * + * V0.11 06/20/2001 REG_0A bit3=1, default enable BP with DA match + * 06/22/2001 Support DM9801 progrmming + * E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000 + * E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200 + * R17 = (R17 & 0xfff0) | NF + 3 + * E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200 + * R17 = (R17 & 0xfff0) | NF + * + * v1.00 modify by simon 2001.9.5 + * change for kernel 2.4.x + * + * v1.1 11/09/2001 fix force mode bug + * + * v1.2 03/18/2003 Weilun Huang <weilun_huang@davicom.com.tw>: + * Fixed phy reset. + * Added tx/rx 32 bit mode. + * Cleaned up for kernel merge. + * + * 03/03/2004 Sascha Hauer <s.hauer@pengutronix.de> + * Port to 2.6 kernel + * + * 24-Sep-2004 Ben Dooks <ben@simtec.co.uk> + * Cleanup of code to remove ifdefs + * Allowed platform device data to influence access width + * Reformatting areas of code + * + * 17-Mar-2005 Sascha Hauer <s.hauer@pengutronix.de> + * * removed 2.4 style module parameters + * * removed removed unused stat counter and fixed + * net_device_stats + * * introduced tx_timeout function + * * reworked locking + */ + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/init.h> +#include <linux/skbuff.h> +#include <linux/version.h> +#include <linux/spinlock.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/dm9000.h> +#include <linux/delay.h> + +#include <asm/delay.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include "dm9000.h" + +/* Board/System/Debug information/definition ---------------- */ + +#define DM9000_PHY 0x40 /* PHY address 0x01 */ + +#define TRUE 1 +#define FALSE 0 + +#define CARDNAME "dm9000" +#define PFX CARDNAME ": " + +#define DM9000_TIMER_WUT jiffies+(HZ*2) /* timer wakeup time : 2 second */ + +#define DM9000_DEBUG 0 + +#if DM9000_DEBUG > 2 +#define PRINTK3(args...) printk(CARDNAME ": " args) +#else +#define PRINTK3(args...) do { } while(0) +#endif + +#if DM9000_DEBUG > 1 +#define PRINTK2(args...) printk(CARDNAME ": " args) +#else +#define PRINTK2(args...) do { } while(0) +#endif + +#if DM9000_DEBUG > 0 +#define PRINTK1(args...) printk(CARDNAME ": " args) +#define PRINTK(args...) printk(CARDNAME ": " args) +#else +#define PRINTK1(args...) do { } while(0) +#define PRINTK(args...) printk(KERN_DEBUG args) +#endif + +/* + * Transmit timeout, default 5 seconds. + */ +static int watchdog = 5000; +module_param(watchdog, int, 0400); +MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds"); + +/* Structure/enum declaration ------------------------------- */ +typedef struct board_info { + + void __iomem *io_addr; /* Register I/O base address */ + void __iomem *io_data; /* Data I/O address */ + u16 irq; /* IRQ */ + + u16 tx_pkt_cnt; + u16 queue_pkt_len; + u16 queue_start_addr; + u16 dbug_cnt; + u8 io_mode; /* 0:word, 2:byte */ + u8 phy_addr; + + void (*inblk)(void __iomem *port, void *data, int length); + void (*outblk)(void __iomem *port, void *data, int length); + void (*dumpblk)(void __iomem *port, int length); + + struct resource *addr_res; /* resources found */ + struct resource *data_res; + struct resource *addr_req; /* resources requested */ + struct resource *data_req; + struct resource *irq_res; + + struct timer_list timer; + struct net_device_stats stats; + unsigned char srom[128]; + spinlock_t lock; + + struct mii_if_info mii; + u32 msg_enable; +} board_info_t; + +/* function declaration ------------------------------------- */ +static int dm9000_probe(struct device *); +static int dm9000_open(struct net_device *); +static int dm9000_start_xmit(struct sk_buff *, struct net_device *); +static int dm9000_stop(struct net_device *); +static int dm9000_do_ioctl(struct net_device *, struct ifreq *, int); + + +static void dm9000_timer(unsigned long); +static void dm9000_init_dm9000(struct net_device *); + +static struct net_device_stats *dm9000_get_stats(struct net_device *); + +static irqreturn_t dm9000_interrupt(int, void *, struct pt_regs *); + +static int dm9000_phy_read(struct net_device *dev, int phyaddr_unsused, int reg); +static void dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, + int value); +static u16 read_srom_word(board_info_t *, int); +static void dm9000_rx(struct net_device *); +static void dm9000_hash_table(struct net_device *); + +//#define DM9000_PROGRAM_EEPROM +#ifdef DM9000_PROGRAM_EEPROM +static void program_eeprom(board_info_t * db); +#endif +/* DM9000 network board routine ---------------------------- */ + +static void +dm9000_reset(board_info_t * db) +{ + PRINTK1("dm9000x: resetting\n"); + /* RESET device */ + writeb(DM9000_NCR, db->io_addr); + udelay(200); + writeb(NCR_RST, db->io_data); + udelay(200); +} + +/* + * Read a byte from I/O port + */ +static u8 +ior(board_info_t * db, int reg) +{ + writeb(reg, db->io_addr); + return readb(db->io_data); +} + +/* + * Write a byte to I/O port + */ + +static void +iow(board_info_t * db, int reg, int value) +{ + writeb(reg, db->io_addr); + writeb(value, db->io_data); +} + +/* routines for sending block to chip */ + +static void dm9000_outblk_8bit(void __iomem *reg, void *data, int count) +{ + writesb(reg, data, count); +} + +static void dm9000_outblk_16bit(void __iomem *reg, void *data, int count) +{ + writesw(reg, data, (count+1) >> 1); +} + +static void dm9000_outblk_32bit(void __iomem *reg, void *data, int count) +{ + writesl(reg, data, (count+3) >> 2); +} + +/* input block from chip to memory */ + +static void dm9000_inblk_8bit(void __iomem *reg, void *data, int count) +{ + readsb(reg, data, count+1); +} + + +static void dm9000_inblk_16bit(void __iomem *reg, void *data, int count) +{ + readsw(reg, data, (count+1) >> 1); +} + +static void dm9000_inblk_32bit(void __iomem *reg, void *data, int count) +{ + readsl(reg, data, (count+3) >> 2); +} + +/* dump block from chip to null */ + +static void dm9000_dumpblk_8bit(void __iomem *reg, int count) +{ + int i; + int tmp; + + for (i = 0; i < count; i++) + tmp = readb(reg); +} + +static void dm9000_dumpblk_16bit(void __iomem *reg, int count) +{ + int i; + int tmp; + + count = (count + 1) >> 1; + + for (i = 0; i < count; i++) + tmp = readw(reg); +} + +static void dm9000_dumpblk_32bit(void __iomem *reg, int count) +{ + int i; + int tmp; + + count = (count + 3) >> 2; + + for (i = 0; i < count; i++) + tmp = readl(reg); +} + +/* dm9000_set_io + * + * select the specified set of io routines to use with the + * device + */ + +static void dm9000_set_io(struct board_info *db, int byte_width) +{ + /* use the size of the data resource to work out what IO + * routines we want to use + */ + + switch (byte_width) { + case 1: + db->dumpblk = dm9000_dumpblk_8bit; + db->outblk = dm9000_outblk_8bit; + db->inblk = dm9000_inblk_8bit; + break; + + case 2: + db->dumpblk = dm9000_dumpblk_16bit; + db->outblk = dm9000_outblk_16bit; + db->inblk = dm9000_inblk_16bit; + break; + + case 3: + printk(KERN_ERR PFX ": 3 byte IO, falling back to 16bit\n"); + db->dumpblk = dm9000_dumpblk_16bit; + db->outblk = dm9000_outblk_16bit; + db->inblk = dm9000_inblk_16bit; + break; + + case 4: + default: + db->dumpblk = dm9000_dumpblk_32bit; + db->outblk = dm9000_outblk_32bit; + db->inblk = dm9000_inblk_32bit; + break; + } +} + + +/* Our watchdog timed out. Called by the networking layer */ +static void dm9000_timeout(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + u8 reg_save; + unsigned long flags; + + /* Save previous register address */ + reg_save = readb(db->io_addr); + spin_lock_irqsave(db->lock,flags); + + netif_stop_queue(dev); + dm9000_reset(db); + dm9000_init_dm9000(dev); + /* We can accept TX packets again */ + dev->trans_start = jiffies; + netif_wake_queue(dev); + + /* Restore previous register address */ + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(db->lock,flags); +} + + +/* dm9000_release_board + * + * release a board, and any mapped resources + */ + +static void +dm9000_release_board(struct platform_device *pdev, struct board_info *db) +{ + if (db->data_res == NULL) { + if (db->addr_res != NULL) + release_mem_region((unsigned long)db->io_addr, 4); + return; + } + + /* unmap our resources */ + + iounmap(db->io_addr); + iounmap(db->io_data); + + /* release the resources */ + + if (db->data_req != NULL) { + release_resource(db->data_req); + kfree(db->data_req); + } + + if (db->addr_res != NULL) { + release_resource(db->data_req); + kfree(db->addr_req); + } +} + +#define res_size(_r) (((_r)->end - (_r)->start) + 1) + +/* + * Search DM9000 board, allocate space and register it + */ +static int +dm9000_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct dm9000_plat_data *pdata = pdev->dev.platform_data; + struct board_info *db; /* Point a board information structure */ + struct net_device *ndev; + unsigned long base; + int ret = 0; + int iosize; + int i; + u32 id_val; + + printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME); + + /* Init network device */ + ndev = alloc_etherdev(sizeof (struct board_info)); + if (!ndev) { + printk("%s: could not allocate device.\n", CARDNAME); + return -ENOMEM; + } + + SET_MODULE_OWNER(ndev); + SET_NETDEV_DEV(ndev, dev); + + PRINTK2("dm9000_probe()"); + + /* setup board info structure */ + db = (struct board_info *) ndev->priv; + memset(db, 0, sizeof (*db)); + + if (pdev->num_resources < 2) { + ret = -ENODEV; + goto out; + } + + switch (pdev->num_resources) { + case 2: + base = pdev->resource[0].start; + + if (!request_mem_region(base, 4, ndev->name)) { + ret = -EBUSY; + goto out; + } + + ndev->base_addr = base; + ndev->irq = pdev->resource[1].start; + db->io_addr = (void *)base; + db->io_data = (void *)(base + 4); + + break; + + case 3: + db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + db->irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + + if (db->addr_res == NULL || db->data_res == NULL) { + printk(KERN_ERR PFX "insufficient resources\n"); + ret = -ENOENT; + goto out; + } + + i = res_size(db->addr_res); + db->addr_req = request_mem_region(db->addr_res->start, i, + pdev->name); + + if (db->addr_req == NULL) { + printk(KERN_ERR PFX "cannot claim address reg area\n"); + ret = -EIO; + goto out; + } + + db->io_addr = ioremap(db->addr_res->start, i); + + if (db->io_addr == NULL) { + printk(KERN_ERR "failed to ioremap address reg\n"); + ret = -EINVAL; + goto out; + } + + iosize = res_size(db->data_res); + db->data_req = request_mem_region(db->data_res->start, iosize, + pdev->name); + + if (db->data_req == NULL) { + printk(KERN_ERR PFX "cannot claim data reg area\n"); + ret = -EIO; + goto out; + } + + db->io_data = ioremap(db->data_res->start, iosize); + + if (db->io_data == NULL) { + printk(KERN_ERR "failed to ioremap data reg\n"); + ret = -EINVAL; + goto out; + } + + /* fill in parameters for net-dev structure */ + + ndev->base_addr = (unsigned long)db->io_addr; + ndev->irq = db->irq_res->start; + + /* ensure at least we have a default set of IO routines */ + dm9000_set_io(db, iosize); + + } + + /* check to see if anything is being over-ridden */ + if (pdata != NULL) { + /* check to see if the driver wants to over-ride the + * default IO width */ + + if (pdata->flags & DM9000_PLATF_8BITONLY) + dm9000_set_io(db, 1); + + if (pdata->flags & DM9000_PLATF_16BITONLY) + dm9000_set_io(db, 2); + + if (pdata->flags & DM9000_PLATF_32BITONLY) + dm9000_set_io(db, 4); + + /* check to see if there are any IO routine + * over-rides */ + + if (pdata->inblk != NULL) + db->inblk = pdata->inblk; + + if (pdata->outblk != NULL) + db->outblk = pdata->outblk; + + if (pdata->dumpblk != NULL) + db->dumpblk = pdata->dumpblk; + } + + dm9000_reset(db); + + /* try two times, DM9000 sometimes gets the first read wrong */ + for (i = 0; i < 2; i++) { + id_val = ior(db, DM9000_VIDL); + id_val |= (u32)ior(db, DM9000_VIDH) << 8; + id_val |= (u32)ior(db, DM9000_PIDL) << 16; + id_val |= (u32)ior(db, DM9000_PIDH) << 24; + + if (id_val == DM9000_ID) + break; + printk("%s: read wrong id 0x%08x\n", CARDNAME, id_val); + } + + if (id_val != DM9000_ID) { + printk("%s: wrong id: 0x%08x\n", CARDNAME, id_val); + goto release; + } + + /* from this point we assume that we have found a DM9000 */ + + /* driver system function */ + ether_setup(ndev); + + ndev->open = &dm9000_open; + ndev->hard_start_xmit = &dm9000_start_xmit; + ndev->tx_timeout = &dm9000_timeout; + ndev->watchdog_timeo = msecs_to_jiffies(watchdog); + ndev->stop = &dm9000_stop; + ndev->get_stats = &dm9000_get_stats; + ndev->set_multicast_list = &dm9000_hash_table; + ndev->do_ioctl = &dm9000_do_ioctl; + +#ifdef DM9000_PROGRAM_EEPROM + program_eeprom(db); +#endif + db->msg_enable = NETIF_MSG_LINK; + db->mii.phy_id_mask = 0x1f; + db->mii.reg_num_mask = 0x1f; + db->mii.force_media = 0; + db->mii.full_duplex = 0; + db->mii.dev = ndev; + db->mii.mdio_read = dm9000_phy_read; + db->mii.mdio_write = dm9000_phy_write; + + /* Read SROM content */ + for (i = 0; i < 64; i++) + ((u16 *) db->srom)[i] = read_srom_word(db, i); + + /* Set Node Address */ + for (i = 0; i < 6; i++) + ndev->dev_addr[i] = db->srom[i]; + + if (!is_valid_ether_addr(ndev->dev_addr)) + printk("%s: Invalid ethernet MAC address. Please " + "set using ifconfig\n", ndev->name); + + dev_set_drvdata(dev, ndev); + ret = register_netdev(ndev); + + if (ret == 0) { + printk("%s: dm9000 at %p,%p IRQ %d MAC: ", + ndev->name, db->io_addr, db->io_data, ndev->irq); + for (i = 0; i < 5; i++) + printk("%02x:", ndev->dev_addr[i]); + printk("%02x\n", ndev->dev_addr[5]); + } + return 0; + + release: + out: + printk("%s: not found (%d).\n", CARDNAME, ret); + + dm9000_release_board(pdev, db); + kfree(ndev); + + return ret; +} + +/* + * Open the interface. + * The interface is opened whenever "ifconfig" actives it. + */ +static int +dm9000_open(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + + PRINTK2("entering dm9000_open\n"); + + if (request_irq(dev->irq, &dm9000_interrupt, SA_SHIRQ, dev->name, dev)) + return -EAGAIN; + + /* Initialize DM9000 board */ + dm9000_reset(db); + dm9000_init_dm9000(dev); + + /* Init driver variable */ + db->dbug_cnt = 0; + + /* set and active a timer process */ + init_timer(&db->timer); + db->timer.expires = DM9000_TIMER_WUT * 2; + db->timer.data = (unsigned long) dev; + db->timer.function = &dm9000_timer; + add_timer(&db->timer); + + mii_check_media(&db->mii, netif_msg_link(db), 1); + netif_start_queue(dev); + + return 0; +} + +/* + * Initilize dm9000 board + */ +static void +dm9000_init_dm9000(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + + PRINTK1("entering %s\n",__FUNCTION__); + + /* I/O mode */ + db->io_mode = ior(db, DM9000_ISR) >> 6; /* ISR bit7:6 keeps I/O mode */ + + /* GPIO0 on pre-activate PHY */ + iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ + iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ + iow(db, DM9000_GPR, 0); /* Enable PHY */ + + /* Program operating register */ + iow(db, DM9000_TCR, 0); /* TX Polling clear */ + iow(db, DM9000_BPTR, 0x3f); /* Less 3Kb, 200us */ + iow(db, DM9000_FCR, 0xff); /* Flow Control */ + iow(db, DM9000_SMCR, 0); /* Special Mode */ + /* clear TX status */ + iow(db, DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END); + iow(db, DM9000_ISR, ISR_CLR_STATUS); /* Clear interrupt status */ + + /* Set address filter table */ + dm9000_hash_table(dev); + + /* Activate DM9000 */ + iow(db, DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN); + /* Enable TX/RX interrupt mask */ + iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM); + + /* Init Driver variable */ + db->tx_pkt_cnt = 0; + db->queue_pkt_len = 0; + dev->trans_start = 0; + spin_lock_init(&db->lock); +} + +/* + * Hardware start transmission. + * Send a packet to media from the upper layer. + */ +static int +dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + + PRINTK3("dm9000_start_xmit\n"); + + if (db->tx_pkt_cnt > 1) + return 1; + + netif_stop_queue(dev); + + /* Disable all interrupts */ + iow(db, DM9000_IMR, IMR_PAR); + + /* Move data to DM9000 TX RAM */ + writeb(DM9000_MWCMD, db->io_addr); + + (db->outblk)(db->io_data, skb->data, skb->len); + db->stats.tx_bytes += skb->len; + + /* TX control: First packet immediately send, second packet queue */ + if (db->tx_pkt_cnt == 0) { + + /* First Packet */ + db->tx_pkt_cnt++; + + /* Set TX length to DM9000 */ + iow(db, DM9000_TXPLL, skb->len & 0xff); + iow(db, DM9000_TXPLH, (skb->len >> 8) & 0xff); + + /* Issue TX polling command */ + iow(db, DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */ + + dev->trans_start = jiffies; /* save the time stamp */ + + } else { + /* Second packet */ + db->tx_pkt_cnt++; + db->queue_pkt_len = skb->len; + } + + /* free this SKB */ + dev_kfree_skb(skb); + + /* Re-enable resource check */ + if (db->tx_pkt_cnt == 1) + netif_wake_queue(dev); + + /* Re-enable interrupt */ + iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM); + + return 0; +} + +static void +dm9000_shutdown(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + + /* RESET device */ + dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */ + iow(db, DM9000_GPR, 0x01); /* Power-Down PHY */ + iow(db, DM9000_IMR, IMR_PAR); /* Disable all interrupt */ + iow(db, DM9000_RCR, 0x00); /* Disable RX */ +} + +/* + * Stop the interface. + * The interface is stopped when it is brought. + */ +static int +dm9000_stop(struct net_device *ndev) +{ + board_info_t *db = (board_info_t *) ndev->priv; + + PRINTK1("entering %s\n",__FUNCTION__); + + /* deleted timer */ + del_timer(&db->timer); + + netif_stop_queue(ndev); + netif_carrier_off(ndev); + + /* free interrupt */ + free_irq(ndev->irq, ndev); + + dm9000_shutdown(ndev); + + return 0; +} + +/* + * DM9000 interrupt handler + * receive the packet to upper layer, free the transmitted packet + */ + +void +dm9000_tx_done(struct net_device *dev, board_info_t * db) +{ + int tx_status = ior(db, DM9000_NSR); /* Got TX status */ + + if (tx_status & (NSR_TX2END | NSR_TX1END)) { + /* One packet sent complete */ + db->tx_pkt_cnt--; + db->stats.tx_packets++; + + /* Queue packet check & send */ + if (db->tx_pkt_cnt > 0) { + iow(db, DM9000_TXPLL, db->queue_pkt_len & 0xff); + iow(db, DM9000_TXPLH, (db->queue_pkt_len >> 8) & 0xff); + iow(db, DM9000_TCR, TCR_TXREQ); + dev->trans_start = jiffies; + } + netif_wake_queue(dev); + } +} + +static irqreturn_t +dm9000_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + board_info_t *db; + int int_status; + u8 reg_save; + + PRINTK3("entering %s\n",__FUNCTION__); + + if (!dev) { + PRINTK1("dm9000_interrupt() without DEVICE arg\n"); + return IRQ_HANDLED; + } + + /* A real interrupt coming */ + db = (board_info_t *) dev->priv; + spin_lock(&db->lock); + + /* Save previous register address */ + reg_save = readb(db->io_addr); + + /* Disable all interrupts */ + iow(db, DM9000_IMR, IMR_PAR); + + /* Got DM9000 interrupt status */ + int_status = ior(db, DM9000_ISR); /* Got ISR */ + iow(db, DM9000_ISR, int_status); /* Clear ISR status */ + + /* Received the coming packet */ + if (int_status & ISR_PRS) + dm9000_rx(dev); + + /* Trnasmit Interrupt check */ + if (int_status & ISR_PTS) + dm9000_tx_done(dev, db); + + /* Re-enable interrupt mask */ + iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM); + + /* Restore previous register address */ + writeb(reg_save, db->io_addr); + + spin_unlock(&db->lock); + + return IRQ_HANDLED; +} + +/* + * Get statistics from driver. + */ +static struct net_device_stats * +dm9000_get_stats(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + return &db->stats; +} + +/* + * Process the upper socket ioctl command + */ +static int +dm9000_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + PRINTK1("entering %s\n",__FUNCTION__); + return 0; +} + +/* + * A periodic timer routine + * Dynamic media sense, allocated Rx buffer... + */ +static void +dm9000_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + board_info_t *db = (board_info_t *) dev->priv; + u8 reg_save; + unsigned long flags; + + PRINTK3("dm9000_timer()\n"); + + spin_lock_irqsave(db->lock,flags); + /* Save previous register address */ + reg_save = readb(db->io_addr); + + mii_check_media(&db->mii, netif_msg_link(db), 0); + + /* Restore previous register address */ + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(db->lock,flags); + + /* Set timer again */ + db->timer.expires = DM9000_TIMER_WUT; + add_timer(&db->timer); +} + +struct dm9000_rxhdr { + u16 RxStatus; + u16 RxLen; +} __attribute__((__packed__)); + +/* + * Received a packet and pass to upper layer + */ +static void +dm9000_rx(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + struct dm9000_rxhdr rxhdr; + struct sk_buff *skb; + u8 rxbyte, *rdptr; + int GoodPacket; + int RxLen; + + /* Check packet ready or not */ + do { + ior(db, DM9000_MRCMDX); /* Dummy read */ + + /* Get most updated data */ + rxbyte = readb(db->io_data); + + /* Status check: this byte must be 0 or 1 */ + if (rxbyte > DM9000_PKT_RDY) { + printk("status check failed: %d\n", rxbyte); + iow(db, DM9000_RCR, 0x00); /* Stop Device */ + iow(db, DM9000_ISR, IMR_PAR); /* Stop INT request */ + return; + } + + if (rxbyte != DM9000_PKT_RDY) + return; + + /* A packet ready now & Get status/length */ + GoodPacket = TRUE; + writeb(DM9000_MRCMD, db->io_addr); + + (db->inblk)(db->io_data, &rxhdr, sizeof(rxhdr)); + + RxLen = rxhdr.RxLen; + + /* Packet Status check */ + if (RxLen < 0x40) { + GoodPacket = FALSE; + PRINTK1("Bad Packet received (runt)\n"); + } + + if (RxLen > DM9000_PKT_MAX) { + PRINTK1("RST: RX Len:%x\n", RxLen); + } + + if (rxhdr.RxStatus & 0xbf00) { + GoodPacket = FALSE; + if (rxhdr.RxStatus & 0x100) { + PRINTK1("fifo error\n"); + db->stats.rx_fifo_errors++; + } + if (rxhdr.RxStatus & 0x200) { + PRINTK1("crc error\n"); + db->stats.rx_crc_errors++; + } + if (rxhdr.RxStatus & 0x8000) { + PRINTK1("length error\n"); + db->stats.rx_length_errors++; + } + } + + /* Move data from DM9000 */ + if (GoodPacket + && ((skb = dev_alloc_skb(RxLen + 4)) != NULL)) { + skb->dev = dev; + skb_reserve(skb, 2); + rdptr = (u8 *) skb_put(skb, RxLen - 4); + + /* Read received packet from RX SRAM */ + + (db->inblk)(db->io_data, rdptr, RxLen); + db->stats.rx_bytes += RxLen; + + /* Pass to upper layer */ + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + db->stats.rx_packets++; + + } else { + /* need to dump the packet's data */ + + (db->dumpblk)(db->io_data, RxLen); + } + } while (rxbyte == DM9000_PKT_RDY); +} + +/* + * Read a word data from SROM + */ +static u16 +read_srom_word(board_info_t * db, int offset) +{ + iow(db, DM9000_EPAR, offset); + iow(db, DM9000_EPCR, EPCR_ERPRR); + mdelay(8); /* according to the datasheet 200us should be enough, + but it doesn't work */ + iow(db, DM9000_EPCR, 0x0); + return (ior(db, DM9000_EPDRL) + (ior(db, DM9000_EPDRH) << 8)); +} + +#ifdef DM9000_PROGRAM_EEPROM +/* + * Write a word data to SROM + */ +static void +write_srom_word(board_info_t * db, int offset, u16 val) +{ + iow(db, DM9000_EPAR, offset); + iow(db, DM9000_EPDRH, ((val >> 8) & 0xff)); + iow(db, DM9000_EPDRL, (val & 0xff)); + iow(db, DM9000_EPCR, EPCR_WEP | EPCR_ERPRW); + mdelay(8); /* same shit */ + iow(db, DM9000_EPCR, 0); +} + +/* + * Only for development: + * Here we write static data to the eeprom in case + * we don't have valid content on a new board + */ +static void +program_eeprom(board_info_t * db) +{ + u16 eeprom[] = { 0x0c00, 0x007f, 0x1300, /* MAC Address */ + 0x0000, /* Autoload: accept nothing */ + 0x0a46, 0x9000, /* Vendor / Product ID */ + 0x0000, /* pin control */ + 0x0000, + }; /* Wake-up mode control */ + int i; + for (i = 0; i < 8; i++) + write_srom_word(db, i, eeprom[i]); +} +#endif + + +/* + * Calculate the CRC valude of the Rx packet + * flag = 1 : return the reverse CRC (for the received packet CRC) + * 0 : return the normal CRC (for Hash Table index) + */ + +static unsigned long +cal_CRC(unsigned char *Data, unsigned int Len, u8 flag) +{ + + u32 crc = ether_crc_le(Len, Data); + + if (flag) + return ~crc; + + return crc; +} + +/* + * Set DM9000 multicast address + */ +static void +dm9000_hash_table(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + struct dev_mc_list *mcptr = dev->mc_list; + int mc_cnt = dev->mc_count; + u32 hash_val; + u16 i, oft, hash_table[4]; + unsigned long flags; + + PRINTK2("dm9000_hash_table()\n"); + + spin_lock_irqsave(&db->lock,flags); + + for (i = 0, oft = 0x10; i < 6; i++, oft++) + iow(db, oft, dev->dev_addr[i]); + + /* Clear Hash Table */ + for (i = 0; i < 4; i++) + hash_table[i] = 0x0; + + /* broadcast address */ + hash_table[3] = 0x8000; + + /* the multicast address in Hash Table : 64 bits */ + for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) { + hash_val = cal_CRC((char *) mcptr->dmi_addr, 6, 0) & 0x3f; + hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16); + } + + /* Write the hash table to MAC MD table */ + for (i = 0, oft = 0x16; i < 4; i++) { + iow(db, oft++, hash_table[i] & 0xff); + iow(db, oft++, (hash_table[i] >> 8) & 0xff); + } + + spin_unlock_irqrestore(&db->lock,flags); +} + + +/* + * Read a word from phyxcer + */ +static int +dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg) +{ + board_info_t *db = (board_info_t *) dev->priv; + unsigned long flags; + int ret; + + spin_lock_irqsave(&db->lock,flags); + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + iow(db, DM9000_EPCR, 0xc); /* Issue phyxcer read command */ + udelay(100); /* Wait read complete */ + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */ + + /* The read data keeps on REG_0D & REG_0E */ + ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL); + + spin_unlock_irqrestore(&db->lock,flags); + + return ret; +} + +/* + * Write a word to phyxcer + */ +static void +dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value) +{ + board_info_t *db = (board_info_t *) dev->priv; + unsigned long flags; + + spin_lock_irqsave(&db->lock,flags); + + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + /* Fill the written data into REG_0D & REG_0E */ + iow(db, DM9000_EPDRL, (value & 0xff)); + iow(db, DM9000_EPDRH, ((value >> 8) & 0xff)); + + iow(db, DM9000_EPCR, 0xa); /* Issue phyxcer write command */ + udelay(500); /* Wait write complete */ + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */ + + spin_unlock_irqrestore(&db->lock,flags); +} + +static int +dm9000_drv_suspend(struct device *dev, u32 state, u32 level) +{ + struct net_device *ndev = dev_get_drvdata(dev); + + if (ndev && level == SUSPEND_DISABLE) { + if (netif_running(ndev)) { + netif_device_detach(ndev); + dm9000_shutdown(ndev); + } + } + return 0; +} + +static int +dm9000_drv_resume(struct device *dev, u32 level) +{ + struct net_device *ndev = dev_get_drvdata(dev); + board_info_t *db = (board_info_t *) ndev->priv; + + if (ndev && level == RESUME_ENABLE) { + + if (netif_running(ndev)) { + dm9000_reset(db); + dm9000_init_dm9000(ndev); + + netif_device_attach(ndev); + } + } + return 0; +} + +static int +dm9000_drv_remove(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct net_device *ndev = dev_get_drvdata(dev); + + dev_set_drvdata(dev, NULL); + + unregister_netdev(ndev); + dm9000_release_board(pdev, (board_info_t *) ndev->priv); + kfree(ndev); /* free device structure */ + + PRINTK1("clean_module() exit\n"); + + return 0; +} + +static struct device_driver dm9000_driver = { + .name = "dm9000", + .bus = &platform_bus_type, + .probe = dm9000_probe, + .remove = dm9000_drv_remove, + .suspend = dm9000_drv_suspend, + .resume = dm9000_drv_resume, +}; + +static int __init +dm9000_init(void) +{ + return driver_register(&dm9000_driver); /* search board and register */ +} + +static void __exit +dm9000_cleanup(void) +{ + driver_unregister(&dm9000_driver); +} + +module_init(dm9000_init); +module_exit(dm9000_cleanup); + +MODULE_AUTHOR("Sascha Hauer, Ben Dooks"); +MODULE_DESCRIPTION("Davicom DM9000 network driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dm9000.h b/drivers/net/dm9000.h new file mode 100644 index 00000000000..82cad360baf --- /dev/null +++ b/drivers/net/dm9000.h @@ -0,0 +1,135 @@ +/* + * dm9000 Ethernet + */ + +#ifndef _DM9000X_H_ +#define _DM9000X_H_ + +#define DM9000_ID 0x90000A46 + +/* although the registers are 16 bit, they are 32-bit aligned. + */ + +#define DM9000_NCR 0x00 +#define DM9000_NSR 0x01 +#define DM9000_TCR 0x02 +#define DM9000_TSR1 0x03 +#define DM9000_TSR2 0x04 +#define DM9000_RCR 0x05 +#define DM9000_RSR 0x06 +#define DM9000_ROCR 0x07 +#define DM9000_BPTR 0x08 +#define DM9000_FCTR 0x09 +#define DM9000_FCR 0x0A +#define DM9000_EPCR 0x0B +#define DM9000_EPAR 0x0C +#define DM9000_EPDRL 0x0D +#define DM9000_EPDRH 0x0E +#define DM9000_WCR 0x0F + +#define DM9000_PAR 0x10 +#define DM9000_MAR 0x16 + +#define DM9000_GPCR 0x1e +#define DM9000_GPR 0x1f +#define DM9000_TRPAL 0x22 +#define DM9000_TRPAH 0x23 +#define DM9000_RWPAL 0x24 +#define DM9000_RWPAH 0x25 + +#define DM9000_VIDL 0x28 +#define DM9000_VIDH 0x29 +#define DM9000_PIDL 0x2A +#define DM9000_PIDH 0x2B + +#define DM9000_CHIPR 0x2C +#define DM9000_SMCR 0x2F + +#define DM9000_MRCMDX 0xF0 +#define DM9000_MRCMD 0xF2 +#define DM9000_MRRL 0xF4 +#define DM9000_MRRH 0xF5 +#define DM9000_MWCMDX 0xF6 +#define DM9000_MWCMD 0xF8 +#define DM9000_MWRL 0xFA +#define DM9000_MWRH 0xFB +#define DM9000_TXPLL 0xFC +#define DM9000_TXPLH 0xFD +#define DM9000_ISR 0xFE +#define DM9000_IMR 0xFF + +#define NCR_EXT_PHY (1<<7) +#define NCR_WAKEEN (1<<6) +#define NCR_FCOL (1<<4) +#define NCR_FDX (1<<3) +#define NCR_LBK (3<<1) +#define NCR_RST (1<<0) + +#define NSR_SPEED (1<<7) +#define NSR_LINKST (1<<6) +#define NSR_WAKEST (1<<5) +#define NSR_TX2END (1<<3) +#define NSR_TX1END (1<<2) +#define NSR_RXOV (1<<1) + +#define TCR_TJDIS (1<<6) +#define TCR_EXCECM (1<<5) +#define TCR_PAD_DIS2 (1<<4) +#define TCR_CRC_DIS2 (1<<3) +#define TCR_PAD_DIS1 (1<<2) +#define TCR_CRC_DIS1 (1<<1) +#define TCR_TXREQ (1<<0) + +#define TSR_TJTO (1<<7) +#define TSR_LC (1<<6) +#define TSR_NC (1<<5) +#define TSR_LCOL (1<<4) +#define TSR_COL (1<<3) +#define TSR_EC (1<<2) + +#define RCR_WTDIS (1<<6) +#define RCR_DIS_LONG (1<<5) +#define RCR_DIS_CRC (1<<4) +#define RCR_ALL (1<<3) +#define RCR_RUNT (1<<2) +#define RCR_PRMSC (1<<1) +#define RCR_RXEN (1<<0) + +#define RSR_RF (1<<7) +#define RSR_MF (1<<6) +#define RSR_LCS (1<<5) +#define RSR_RWTO (1<<4) +#define RSR_PLE (1<<3) +#define RSR_AE (1<<2) +#define RSR_CE (1<<1) +#define RSR_FOE (1<<0) + +#define FCTR_HWOT(ot) (( ot & 0xf ) << 4 ) +#define FCTR_LWOT(ot) ( ot & 0xf ) + +#define IMR_PAR (1<<7) +#define IMR_ROOM (1<<3) +#define IMR_ROM (1<<2) +#define IMR_PTM (1<<1) +#define IMR_PRM (1<<0) + +#define ISR_ROOS (1<<3) +#define ISR_ROS (1<<2) +#define ISR_PTS (1<<1) +#define ISR_PRS (1<<0) +#define ISR_CLR_STATUS (ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS) + +#define EPCR_REEP (1<<5) +#define EPCR_WEP (1<<4) +#define EPCR_EPOS (1<<3) +#define EPCR_ERPRR (1<<2) +#define EPCR_ERPRW (1<<1) +#define EPCR_ERRE (1<<0) + +#define GPCR_GEP_CNTL (1<<0) + +#define DM9000_PKT_RDY 0x01 /* Packet ready to receive */ +#define DM9000_PKT_MAX 1536 /* Received packet max size */ + +#endif /* _DM9000X_H_ */ + diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 1b68dd5a49b..4a47df5a9ff 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -155,9 +155,9 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.3.6-k2"DRV_EXT +#define DRV_VERSION "3.4.8-k2"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" -#define DRV_COPYRIGHT "Copyright(c) 1999-2004 Intel Corporation" +#define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation" #define PFX DRV_NAME ": " #define E100_WATCHDOG_PERIOD (2 * HZ) @@ -210,11 +210,17 @@ static struct pci_device_id e100_id_table[] = { INTEL_8255X_ETHERNET_DEVICE(0x1069, 6), INTEL_8255X_ETHERNET_DEVICE(0x106A, 6), INTEL_8255X_ETHERNET_DEVICE(0x106B, 6), + INTEL_8255X_ETHERNET_DEVICE(0x1091, 7), + INTEL_8255X_ETHERNET_DEVICE(0x1092, 7), + INTEL_8255X_ETHERNET_DEVICE(0x1093, 7), + INTEL_8255X_ETHERNET_DEVICE(0x1094, 7), + INTEL_8255X_ETHERNET_DEVICE(0x1095, 7), INTEL_8255X_ETHERNET_DEVICE(0x1209, 0), INTEL_8255X_ETHERNET_DEVICE(0x1229, 0), INTEL_8255X_ETHERNET_DEVICE(0x2449, 2), INTEL_8255X_ETHERNET_DEVICE(0x2459, 2), INTEL_8255X_ETHERNET_DEVICE(0x245D, 2), + INTEL_8255X_ETHERNET_DEVICE(0x27DC, 7), { 0, } }; MODULE_DEVICE_TABLE(pci, e100_id_table); @@ -269,6 +275,12 @@ enum scb_status { rus_mask = 0x3C, }; +enum ru_state { + RU_SUSPENDED = 0, + RU_RUNNING = 1, + RU_UNINITIALIZED = -1, +}; + enum scb_stat_ack { stat_ack_not_ours = 0x00, stat_ack_sw_gen = 0x04, @@ -510,7 +522,7 @@ struct nic { struct rx *rx_to_use; struct rx *rx_to_clean; struct rfd blank_rfd; - int ru_running; + enum ru_state ru_running; spinlock_t cb_lock ____cacheline_aligned; spinlock_t cmd_lock; @@ -539,6 +551,7 @@ struct nic { struct timer_list watchdog; struct timer_list blink_timer; struct mii_if_info mii; + struct work_struct tx_timeout_task; enum loopback loopback; struct mem *mem; @@ -770,7 +783,7 @@ static int e100_eeprom_save(struct nic *nic, u16 start, u16 count) return 0; } -#define E100_WAIT_SCB_TIMEOUT 40 +#define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */ static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr) { unsigned long flags; @@ -840,6 +853,10 @@ static inline int e100_exec_cb(struct nic *nic, struct sk_buff *skb, * because the controller is too busy, so * let's just queue the command and try again * when another command is scheduled. */ + if(err == -ENOSPC) { + //request a reset + schedule_work(&nic->tx_timeout_task); + } break; } else { nic->cuc_cmd = cuc_resume; @@ -884,7 +901,7 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data) static void e100_get_defaults(struct nic *nic) { - struct param_range rfds = { .min = 64, .max = 256, .count = 64 }; + struct param_range rfds = { .min = 16, .max = 256, .count = 64 }; struct param_range cbs = { .min = 64, .max = 256, .count = 64 }; pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id); @@ -899,8 +916,9 @@ static void e100_get_defaults(struct nic *nic) /* Quadwords to DMA into FIFO before starting frame transmit */ nic->tx_threshold = 0xE0; - nic->tx_command = cpu_to_le16(cb_tx | cb_i | cb_tx_sf | - ((nic->mac >= mac_82558_D101_A4) ? cb_cid : 0)); + /* no interrupt for every tx completion, delay = 256us if not 557*/ + nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf | + ((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i)); /* Template for a freshly allocated RFD */ nic->blank_rfd.command = cpu_to_le16(cb_el); @@ -964,7 +982,8 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) if(nic->flags & multicast_all) config->multicast_all = 0x1; /* 1=accept, 0=no */ - if(!(nic->flags & wol_magic)) + /* disable WoL when up */ + if(netif_running(nic->netdev) || !(nic->flags & wol_magic)) config->magic_packet_disable = 0x1; /* 1=off, 0=on */ if(nic->mac >= mac_82558_D101_A4) { @@ -1203,7 +1222,9 @@ static void e100_update_stats(struct nic *nic) } } - e100_exec_cmd(nic, cuc_dump_reset, 0); + + if(e100_exec_cmd(nic, cuc_dump_reset, 0)) + DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n"); } static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex) @@ -1279,12 +1300,15 @@ static inline void e100_xmit_prepare(struct nic *nic, struct cb *cb, struct sk_buff *skb) { cb->command = nic->tx_command; + /* interrupt every 16 packets regardless of delay */ + if((nic->cbs_avail & ~15) == nic->cbs_avail) cb->command |= cb_i; cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd); cb->u.tcb.tcb_byte_count = 0; cb->u.tcb.threshold = nic->tx_threshold; cb->u.tcb.tbd_count = 1; cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev, skb->data, skb->len, PCI_DMA_TODEVICE)); + // check for mapping failure? cb->u.tcb.tbd.size = cpu_to_le16(skb->len); } @@ -1297,7 +1321,8 @@ static int e100_xmit_frame(struct sk_buff *skb, struct net_device *netdev) /* SW workaround for ICH[x] 10Mbps/half duplex Tx hang. Issue a NOP command followed by a 1us delay before issuing the Tx command. */ - e100_exec_cmd(nic, cuc_nop, 0); + if(e100_exec_cmd(nic, cuc_nop, 0)) + DPRINTK(TX_ERR, DEBUG, "exec cuc_nop failed\n"); udelay(1); } @@ -1415,12 +1440,18 @@ static int e100_alloc_cbs(struct nic *nic) return 0; } -static inline void e100_start_receiver(struct nic *nic) +static inline void e100_start_receiver(struct nic *nic, struct rx *rx) { + if(!nic->rxs) return; + if(RU_SUSPENDED != nic->ru_running) return; + + /* handle init time starts */ + if(!rx) rx = nic->rxs; + /* (Re)start RU if suspended or idle and RFA is non-NULL */ - if(!nic->ru_running && nic->rx_to_clean->skb) { - e100_exec_cmd(nic, ruc_start, nic->rx_to_clean->dma_addr); - nic->ru_running = 1; + if(rx->skb) { + e100_exec_cmd(nic, ruc_start, rx->dma_addr); + nic->ru_running = RU_RUNNING; } } @@ -1437,6 +1468,13 @@ static inline int e100_rx_alloc_skb(struct nic *nic, struct rx *rx) rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data, RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); + if(pci_dma_mapping_error(rx->dma_addr)) { + dev_kfree_skb_any(rx->skb); + rx->skb = 0; + rx->dma_addr = 0; + return -ENOMEM; + } + /* Link the RFD to end of RFA by linking previous RFD to * this one, and clearing EL bit of previous. */ if(rx->prev->skb) { @@ -1471,7 +1509,7 @@ static inline int e100_rx_indicate(struct nic *nic, struct rx *rx, /* If data isn't ready, nothing to indicate */ if(unlikely(!(rfd_status & cb_complete))) - return -EAGAIN; + return -ENODATA; /* Get actual data size */ actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF; @@ -1482,6 +1520,10 @@ static inline int e100_rx_indicate(struct nic *nic, struct rx *rx, pci_unmap_single(nic->pdev, rx->dma_addr, RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + /* this allows for a fast restart without re-enabling interrupts */ + if(le16_to_cpu(rfd->command) & cb_el) + nic->ru_running = RU_SUSPENDED; + /* Pull off the RFD and put the actual data (minus eth hdr) */ skb_reserve(skb, sizeof(struct rfd)); skb_put(skb, actual_size); @@ -1514,20 +1556,45 @@ static inline void e100_rx_clean(struct nic *nic, unsigned int *work_done, unsigned int work_to_do) { struct rx *rx; + int restart_required = 0; + struct rx *rx_to_start = NULL; + + /* are we already rnr? then pay attention!!! this ensures that + * the state machine progression never allows a start with a + * partially cleaned list, avoiding a race between hardware + * and rx_to_clean when in NAPI mode */ + if(RU_SUSPENDED == nic->ru_running) + restart_required = 1; /* Indicate newly arrived packets */ for(rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) { - if(e100_rx_indicate(nic, rx, work_done, work_to_do)) + int err = e100_rx_indicate(nic, rx, work_done, work_to_do); + if(-EAGAIN == err) { + /* hit quota so have more work to do, restart once + * cleanup is complete */ + restart_required = 0; + break; + } else if(-ENODATA == err) break; /* No more to clean */ } + /* save our starting point as the place we'll restart the receiver */ + if(restart_required) + rx_to_start = nic->rx_to_clean; + /* Alloc new skbs to refill list */ for(rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) { if(unlikely(e100_rx_alloc_skb(nic, rx))) break; /* Better luck next time (see watchdog) */ } - e100_start_receiver(nic); + if(restart_required) { + // ack the rnr? + writeb(stat_ack_rnr, &nic->csr->scb.stat_ack); + e100_start_receiver(nic, rx_to_start); + if(work_done) + (*work_done)++; + } } static void e100_rx_clean_list(struct nic *nic) @@ -1535,6 +1602,8 @@ static void e100_rx_clean_list(struct nic *nic) struct rx *rx; unsigned int i, count = nic->params.rfds.count; + nic->ru_running = RU_UNINITIALIZED; + if(nic->rxs) { for(rx = nic->rxs, i = 0; i < count; rx++, i++) { if(rx->skb) { @@ -1548,7 +1617,6 @@ static void e100_rx_clean_list(struct nic *nic) } nic->rx_to_use = nic->rx_to_clean = NULL; - nic->ru_running = 0; } static int e100_rx_alloc_list(struct nic *nic) @@ -1557,6 +1625,7 @@ static int e100_rx_alloc_list(struct nic *nic) unsigned int i, count = nic->params.rfds.count; nic->rx_to_use = nic->rx_to_clean = NULL; + nic->ru_running = RU_UNINITIALIZED; if(!(nic->rxs = kmalloc(sizeof(struct rx) * count, GFP_ATOMIC))) return -ENOMEM; @@ -1572,6 +1641,7 @@ static int e100_rx_alloc_list(struct nic *nic) } nic->rx_to_use = nic->rx_to_clean = nic->rxs; + nic->ru_running = RU_SUSPENDED; return 0; } @@ -1593,7 +1663,7 @@ static irqreturn_t e100_intr(int irq, void *dev_id, struct pt_regs *regs) /* We hit Receive No Resource (RNR); restart RU after cleaning */ if(stat_ack & stat_ack_rnr) - nic->ru_running = 0; + nic->ru_running = RU_SUSPENDED; e100_disable_irq(nic); netif_rx_schedule(netdev); @@ -1663,6 +1733,7 @@ static int e100_change_mtu(struct net_device *netdev, int new_mtu) return 0; } +#ifdef CONFIG_PM static int e100_asf(struct nic *nic) { /* ASF can be enabled from eeprom */ @@ -1671,6 +1742,7 @@ static int e100_asf(struct nic *nic) !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) && ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE)); } +#endif static int e100_up(struct nic *nic) { @@ -1683,13 +1755,16 @@ static int e100_up(struct nic *nic) if((err = e100_hw_init(nic))) goto err_clean_cbs; e100_set_multicast_list(nic->netdev); - e100_start_receiver(nic); + e100_start_receiver(nic, 0); mod_timer(&nic->watchdog, jiffies); if((err = request_irq(nic->pdev->irq, e100_intr, SA_SHIRQ, nic->netdev->name, nic->netdev))) goto err_no_irq; - e100_enable_irq(nic); netif_wake_queue(nic->netdev); + netif_poll_enable(nic->netdev); + /* enable ints _after_ enabling poll, preventing a race between + * disable ints+schedule */ + e100_enable_irq(nic); return 0; err_no_irq: @@ -1703,11 +1778,13 @@ err_rx_clean_list: static void e100_down(struct nic *nic) { + /* wait here for poll to complete */ + netif_poll_disable(nic->netdev); + netif_stop_queue(nic->netdev); e100_hw_reset(nic); free_irq(nic->pdev->irq, nic->netdev); del_timer_sync(&nic->watchdog); netif_carrier_off(nic->netdev); - netif_stop_queue(nic->netdev); e100_clean_cbs(nic); e100_rx_clean_list(nic); } @@ -1716,6 +1793,15 @@ static void e100_tx_timeout(struct net_device *netdev) { struct nic *nic = netdev_priv(netdev); + /* Reset outside of interrupt context, to avoid request_irq + * in interrupt context */ + schedule_work(&nic->tx_timeout_task); +} + +static void e100_tx_timeout_task(struct net_device *netdev) +{ + struct nic *nic = netdev_priv(netdev); + DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n", readb(&nic->csr->scb.status)); e100_down(netdev_priv(netdev)); @@ -1749,7 +1835,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, BMCR_LOOPBACK); - e100_start_receiver(nic); + e100_start_receiver(nic, 0); if(!(skb = dev_alloc_skb(ETH_DATA_LEN))) { err = -ENOMEM; @@ -1869,7 +1955,6 @@ static int e100_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) else nic->flags &= ~wol_magic; - pci_enable_wake(nic->pdev, 0, nic->flags & (wol_magic | e100_asf(nic))); e100_exec_cb(nic, NULL, e100_configure); return 0; @@ -2223,6 +2308,7 @@ static int __devinit e100_probe(struct pci_dev *pdev, e100_get_defaults(nic); + /* locks must be initialized before calling hw_reset */ spin_lock_init(&nic->cb_lock); spin_lock_init(&nic->cmd_lock); @@ -2240,6 +2326,9 @@ static int __devinit e100_probe(struct pci_dev *pdev, nic->blink_timer.function = e100_blink_led; nic->blink_timer.data = (unsigned long)nic; + INIT_WORK(&nic->tx_timeout_task, + (void (*)(void *))e100_tx_timeout_task, netdev); + if((err = e100_alloc(nic))) { DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n"); goto err_out_iounmap; @@ -2263,7 +2352,8 @@ static int __devinit e100_probe(struct pci_dev *pdev, (nic->eeprom[eeprom_id] & eeprom_id_wol)) nic->flags |= wol_magic; - pci_enable_wake(pdev, 0, nic->flags & (wol_magic | e100_asf(nic))); + /* ack any pending wake events, disable PME */ + pci_enable_wake(pdev, 0, 0); strcpy(netdev->name, "eth%d"); if((err = register_netdev(netdev))) { @@ -2335,7 +2425,10 @@ static int e100_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); - e100_hw_init(nic); + /* ack any pending wake events, disable PME */ + pci_enable_wake(pdev, 0, 0); + if(e100_hw_init(nic)) + DPRINTK(HW, ERR, "e100_hw_init failed\n"); netif_device_attach(netdev); if(netif_running(netdev)) @@ -2345,6 +2438,21 @@ static int e100_resume(struct pci_dev *pdev) } #endif + +static void e100_shutdown(struct device *dev) +{ + struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); + struct net_device *netdev = pci_get_drvdata(pdev); + struct nic *nic = netdev_priv(netdev); + +#ifdef CONFIG_PM + pci_enable_wake(pdev, 0, nic->flags & (wol_magic | e100_asf(nic))); +#else + pci_enable_wake(pdev, 0, nic->flags & (wol_magic)); +#endif +} + + static struct pci_driver e100_driver = { .name = DRV_NAME, .id_table = e100_id_table, @@ -2354,6 +2462,11 @@ static struct pci_driver e100_driver = { .suspend = e100_suspend, .resume = e100_resume, #endif + + .driver = { + .shutdown = e100_shutdown, + } + }; static int __init e100_init_module(void) diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 148930d4e9b..af1e82c5b80 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -112,6 +112,8 @@ struct e1000_adapter; #define E1000_MAX_82544_RXD 4096 /* Supported Rx Buffer Sizes */ +#define E1000_RXBUFFER_128 128 /* Used for packet split */ +#define E1000_RXBUFFER_256 256 /* Used for packet split */ #define E1000_RXBUFFER_2048 2048 #define E1000_RXBUFFER_4096 4096 #define E1000_RXBUFFER_8192 8192 @@ -137,15 +139,19 @@ struct e1000_adapter; /* How many Rx Buffers do we bundle into one write to the hardware ? */ #define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */ -#define AUTO_ALL_MODES 0 -#define E1000_EEPROM_82544_APM 0x0004 -#define E1000_EEPROM_APME 0x0400 +#define AUTO_ALL_MODES 0 +#define E1000_EEPROM_82544_APM 0x0400 +#define E1000_EEPROM_APME 0x0400 #ifndef E1000_MASTER_SLAVE /* Switch to override PHY master/slave setting */ #define E1000_MASTER_SLAVE e1000_ms_hw_default #endif +#define E1000_MNG_VLAN_NONE -1 +/* Number of packet split data buffers (not including the header buffer) */ +#define PS_PAGE_BUFFERS MAX_PS_BUFFERS-1 + /* only works for sizes that are powers of 2 */ #define E1000_ROUNDUP(i, size) ((i) = (((i) + (size) - 1) & ~((size) - 1))) @@ -159,6 +165,9 @@ struct e1000_buffer { uint16_t next_to_watch; }; +struct e1000_ps_page { struct page *ps_page[MAX_PS_BUFFERS]; }; +struct e1000_ps_page_dma { uint64_t ps_page_dma[MAX_PS_BUFFERS]; }; + struct e1000_desc_ring { /* pointer to the descriptor ring memory */ void *desc; @@ -174,12 +183,19 @@ struct e1000_desc_ring { unsigned int next_to_clean; /* array of buffer information structs */ struct e1000_buffer *buffer_info; + /* arrays of page information for packet split */ + struct e1000_ps_page *ps_page; + struct e1000_ps_page_dma *ps_page_dma; }; #define E1000_DESC_UNUSED(R) \ ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \ (R)->next_to_clean - (R)->next_to_use - 1) +#define E1000_RX_DESC_PS(R, i) \ + (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) +#define E1000_RX_DESC_EXT(R, i) \ + (&(((union e1000_rx_desc_extended *)((R).desc))[i])) #define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i])) #define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc) #define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc) @@ -192,6 +208,7 @@ struct e1000_adapter { struct timer_list watchdog_timer; struct timer_list phy_info_timer; struct vlan_group *vlgrp; + uint16_t mng_vlan_id; uint32_t bd_number; uint32_t rx_buffer_len; uint32_t part_num; @@ -228,14 +245,23 @@ struct e1000_adapter { boolean_t detect_tx_hung; /* RX */ +#ifdef CONFIG_E1000_NAPI + boolean_t (*clean_rx) (struct e1000_adapter *adapter, int *work_done, + int work_to_do); +#else + boolean_t (*clean_rx) (struct e1000_adapter *adapter); +#endif + void (*alloc_rx_buf) (struct e1000_adapter *adapter); struct e1000_desc_ring rx_ring; uint64_t hw_csum_err; uint64_t hw_csum_good; uint32_t rx_int_delay; uint32_t rx_abs_int_delay; boolean_t rx_csum; + boolean_t rx_ps; uint32_t gorcl; uint64_t gorcl_old; + uint16_t rx_ps_bsize0; /* Interrupt Throttle Rate */ uint32_t itr; @@ -257,5 +283,8 @@ struct e1000_adapter { int msg_enable; +#ifdef CONFIG_PCI_MSI + boolean_t have_msi; +#endif }; #endif /* _E1000_H_ */ diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 0a2ca7c73a4..237247f74df 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -69,6 +69,7 @@ static const struct e1000_stats e1000_gstrings_stats[] = { { "rx_crc_errors", E1000_STAT(net_stats.rx_crc_errors) }, { "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) }, { "rx_fifo_errors", E1000_STAT(net_stats.rx_fifo_errors) }, + { "rx_no_buffer_count", E1000_STAT(stats.rnbc) }, { "rx_missed_errors", E1000_STAT(net_stats.rx_missed_errors) }, { "tx_aborted_errors", E1000_STAT(net_stats.tx_aborted_errors) }, { "tx_carrier_errors", E1000_STAT(net_stats.tx_carrier_errors) }, @@ -593,7 +594,7 @@ e1000_set_ringparam(struct net_device *netdev, tx_old = adapter->tx_ring; rx_old = adapter->rx_ring; - if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + if((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) return -EINVAL; if(netif_running(adapter->netdev)) @@ -784,8 +785,8 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) /* Hook up test interrupt handler just for this test */ if(!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) { shared_int = FALSE; - } else if(request_irq(irq, &e1000_test_intr, SA_SHIRQ, - netdev->name, netdev)){ + } else if(request_irq(irq, &e1000_test_intr, SA_SHIRQ, + netdev->name, netdev)){ *data = 1; return -1; } @@ -842,10 +843,8 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) * test failed. */ adapter->test_icr = 0; - E1000_WRITE_REG(&adapter->hw, IMC, - (~mask & 0x00007FFF)); - E1000_WRITE_REG(&adapter->hw, ICS, - (~mask & 0x00007FFF)); + E1000_WRITE_REG(&adapter->hw, IMC, ~mask & 0x00007FFF); + E1000_WRITE_REG(&adapter->hw, ICS, ~mask & 0x00007FFF); msec_delay(10); if(adapter->test_icr) { @@ -919,7 +918,8 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) /* Setup Tx descriptor ring and Tx buffers */ - txdr->count = 80; + if(!txdr->count) + txdr->count = E1000_DEFAULT_TXD; size = txdr->count * sizeof(struct e1000_buffer); if(!(txdr->buffer_info = kmalloc(size, GFP_KERNEL))) { @@ -974,7 +974,8 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) /* Setup Rx descriptor ring and Rx buffers */ - rxdr->count = 80; + if(!rxdr->count) + rxdr->count = E1000_DEFAULT_RXD; size = rxdr->count * sizeof(struct e1000_buffer); if(!(rxdr->buffer_info = kmalloc(size, GFP_KERNEL))) { @@ -1008,7 +1009,7 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i); struct sk_buff *skb; - if(!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, + if(!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL))) { ret_val = 6; goto err_nomem; @@ -1310,31 +1311,62 @@ e1000_run_loopback_test(struct e1000_adapter *adapter) struct e1000_desc_ring *txdr = &adapter->test_tx_ring; struct e1000_desc_ring *rxdr = &adapter->test_rx_ring; struct pci_dev *pdev = adapter->pdev; - int i, ret_val; + int i, j, k, l, lc, good_cnt, ret_val=0; + unsigned long time; E1000_WRITE_REG(&adapter->hw, RDT, rxdr->count - 1); - for(i = 0; i < 64; i++) { - e1000_create_lbtest_frame(txdr->buffer_info[i].skb, 1024); - pci_dma_sync_single_for_device(pdev, txdr->buffer_info[i].dma, - txdr->buffer_info[i].length, - PCI_DMA_TODEVICE); - } - E1000_WRITE_REG(&adapter->hw, TDT, i); - - msec_delay(200); - - i = 0; - do { - pci_dma_sync_single_for_cpu(pdev, rxdr->buffer_info[i].dma, - rxdr->buffer_info[i].length, - PCI_DMA_FROMDEVICE); - - ret_val = e1000_check_lbtest_frame(rxdr->buffer_info[i].skb, - 1024); - i++; - } while (ret_val != 0 && i < 64); + /* Calculate the loop count based on the largest descriptor ring + * The idea is to wrap the largest ring a number of times using 64 + * send/receive pairs during each loop + */ + if(rxdr->count <= txdr->count) + lc = ((txdr->count / 64) * 2) + 1; + else + lc = ((rxdr->count / 64) * 2) + 1; + + k = l = 0; + for(j = 0; j <= lc; j++) { /* loop count loop */ + for(i = 0; i < 64; i++) { /* send the packets */ + e1000_create_lbtest_frame(txdr->buffer_info[i].skb, + 1024); + pci_dma_sync_single_for_device(pdev, + txdr->buffer_info[k].dma, + txdr->buffer_info[k].length, + PCI_DMA_TODEVICE); + if(unlikely(++k == txdr->count)) k = 0; + } + E1000_WRITE_REG(&adapter->hw, TDT, k); + msec_delay(200); + time = jiffies; /* set the start time for the receive */ + good_cnt = 0; + do { /* receive the sent packets */ + pci_dma_sync_single_for_cpu(pdev, + rxdr->buffer_info[l].dma, + rxdr->buffer_info[l].length, + PCI_DMA_FROMDEVICE); + + ret_val = e1000_check_lbtest_frame( + rxdr->buffer_info[l].skb, + 1024); + if(!ret_val) + good_cnt++; + if(unlikely(++l == rxdr->count)) l = 0; + /* time + 20 msecs (200 msecs on 2.4) is more than + * enough time to complete the receives, if it's + * exceeded, break and error off + */ + } while (good_cnt < 64 && jiffies < (time + 20)); + if(good_cnt != 64) { + ret_val = 13; /* ret_val is the same as mis-compare */ + break; + } + if(jiffies >= (time + 2)) { + ret_val = 14; /* error code for time out error */ + break; + } + } /* end loop count loop */ return ret_val; } @@ -1354,13 +1386,12 @@ static int e1000_link_test(struct e1000_adapter *adapter, uint64_t *data) { *data = 0; - if (adapter->hw.media_type == e1000_media_type_internal_serdes) { int i = 0; adapter->hw.serdes_link_down = TRUE; - /* on some blade server designs link establishment */ - /* could take as long as 2-3 minutes. */ + /* On some blade server designs, link establishment + * could take as long as 2-3 minutes */ do { e1000_check_for_link(&adapter->hw); if (adapter->hw.serdes_link_down == FALSE) @@ -1368,9 +1399,11 @@ e1000_link_test(struct e1000_adapter *adapter, uint64_t *data) msec_delay(20); } while (i++ < 3750); - *data = 1; + *data = 1; } else { e1000_check_for_link(&adapter->hw); + if(adapter->hw.autoneg) /* if auto_neg is set wait for it */ + msec_delay(4000); if(!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) { *data = 1; diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 786a9b93565..723589b28be 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -63,10 +63,11 @@ static uint16_t e1000_shift_in_ee_bits(struct e1000_hw *hw, uint16_t count); static int32_t e1000_acquire_eeprom(struct e1000_hw *hw); static void e1000_release_eeprom(struct e1000_hw *hw); static void e1000_standby_eeprom(struct e1000_hw *hw); -static int32_t e1000_id_led_init(struct e1000_hw * hw); static int32_t e1000_set_vco_speed(struct e1000_hw *hw); static int32_t e1000_polarity_reversal_workaround(struct e1000_hw *hw); static int32_t e1000_set_phy_mode(struct e1000_hw *hw); +static int32_t e1000_host_if_read_cookie(struct e1000_hw *hw, uint8_t *buffer); +static uint8_t e1000_calculate_mng_checksum(char *buffer, uint32_t length); /* IGP cable length table */ static const @@ -80,6 +81,17 @@ uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, 120, 120}; +static const +uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = + { 8, 13, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, + 22, 24, 27, 30, 32, 35, 37, 40, 42, 44, 47, 49, 51, 54, 56, 58, + 32, 35, 38, 41, 44, 47, 50, 53, 55, 58, 61, 63, 66, 69, 71, 74, + 43, 47, 51, 54, 58, 61, 64, 67, 71, 74, 77, 80, 82, 85, 88, 90, + 57, 62, 66, 70, 74, 77, 81, 85, 88, 91, 94, 97, 100, 103, 106, 108, + 73, 78, 82, 87, 91, 95, 98, 102, 105, 109, 112, 114, 117, 119, 122, 124, + 91, 96, 101, 105, 109, 113, 116, 119, 122, 125, 127, 128, 128, 128, 128, 128, + 108, 113, 117, 121, 124, 127, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128}; + /****************************************************************************** * Set the phy type member in the hw struct. @@ -91,10 +103,14 @@ e1000_set_phy_type(struct e1000_hw *hw) { DEBUGFUNC("e1000_set_phy_type"); + if(hw->mac_type == e1000_undefined) + return -E1000_ERR_PHY_TYPE; + switch(hw->phy_id) { case M88E1000_E_PHY_ID: case M88E1000_I_PHY_ID: case M88E1011_I_PHY_ID: + case M88E1111_I_PHY_ID: hw->phy_type = e1000_phy_m88; break; case IGP01E1000_I_PHY_ID: @@ -128,7 +144,6 @@ e1000_phy_init_script(struct e1000_hw *hw) DEBUGFUNC("e1000_phy_init_script"); - if(hw->phy_init_script) { msec_delay(20); @@ -271,6 +286,7 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82546GB_FIBER: case E1000_DEV_ID_82546GB_SERDES: case E1000_DEV_ID_82546GB_PCIE: + case E1000_DEV_ID_82546GB_QUAD_COPPER: hw->mac_type = e1000_82546_rev_3; break; case E1000_DEV_ID_82541EI: @@ -289,12 +305,19 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82547GI: hw->mac_type = e1000_82547_rev_2; break; + case E1000_DEV_ID_82573E: + case E1000_DEV_ID_82573E_IAMT: + hw->mac_type = e1000_82573; + break; default: /* Should never have loaded on this device */ return -E1000_ERR_MAC_TYPE; } switch(hw->mac_type) { + case e1000_82573: + hw->eeprom_semaphore_present = TRUE; + /* fall through */ case e1000_82541: case e1000_82547: case e1000_82541_rev_2: @@ -360,6 +383,9 @@ e1000_reset_hw(struct e1000_hw *hw) uint32_t icr; uint32_t manc; uint32_t led_ctrl; + uint32_t timeout; + uint32_t extcnf_ctrl; + int32_t ret_val; DEBUGFUNC("e1000_reset_hw"); @@ -369,6 +395,15 @@ e1000_reset_hw(struct e1000_hw *hw) e1000_pci_clear_mwi(hw); } + if(hw->bus_type == e1000_bus_type_pci_express) { + /* Prevent the PCI-E bus from sticking if there is no TLP connection + * on the last TLP read/write transaction when MAC is reset. + */ + if(e1000_disable_pciex_master(hw) != E1000_SUCCESS) { + DEBUGOUT("PCI-E Master disable polling has failed.\n"); + } + } + /* Clear interrupt mask to stop board from generating interrupts */ DEBUGOUT("Masking off all interrupts\n"); E1000_WRITE_REG(hw, IMC, 0xffffffff); @@ -393,10 +428,32 @@ e1000_reset_hw(struct e1000_hw *hw) /* Must reset the PHY before resetting the MAC */ if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_PHY_RST)); + E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_PHY_RST)); msec_delay(5); } + /* Must acquire the MDIO ownership before MAC reset. + * Ownership defaults to firmware after a reset. */ + if(hw->mac_type == e1000_82573) { + timeout = 10; + + extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); + extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; + + do { + E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl); + extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); + + if(extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) + break; + else + extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; + + msec_delay(2); + timeout--; + } while(timeout); + } + /* Issue a global reset to the MAC. This will reset the chip's * transmit, receive, DMA, and link units. It will not effect * the current PCI configuration. The global reset bit is self- @@ -450,6 +507,18 @@ e1000_reset_hw(struct e1000_hw *hw) /* Wait for EEPROM reload */ msec_delay(20); break; + case e1000_82573: + udelay(10); + ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_EE_RST; + E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(hw); + /* fall through */ + ret_val = e1000_get_auto_rd_done(hw); + if(ret_val) + /* We don't want to continue accessing MAC registers. */ + return ret_val; + break; default: /* Wait for EEPROM reload (it happens automatically) */ msec_delay(5); @@ -457,7 +526,7 @@ e1000_reset_hw(struct e1000_hw *hw) } /* Disable HW ARPs on ASF enabled adapters */ - if(hw->mac_type >= e1000_82540) { + if(hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) { manc = E1000_READ_REG(hw, MANC); manc &= ~(E1000_MANC_ARP_EN); E1000_WRITE_REG(hw, MANC, manc); @@ -510,6 +579,8 @@ e1000_init_hw(struct e1000_hw *hw) uint16_t pcix_stat_hi_word; uint16_t cmd_mmrbc; uint16_t stat_mmrbc; + uint32_t mta_size; + DEBUGFUNC("e1000_init_hw"); /* Initialize Identification LED */ @@ -524,8 +595,8 @@ e1000_init_hw(struct e1000_hw *hw) /* Disabling VLAN filtering. */ DEBUGOUT("Initializing the IEEE VLAN\n"); - E1000_WRITE_REG(hw, VET, 0); - + if (hw->mac_type < e1000_82545_rev_3) + E1000_WRITE_REG(hw, VET, 0); e1000_clear_vfta(hw); /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */ @@ -553,14 +624,16 @@ e1000_init_hw(struct e1000_hw *hw) /* Zero out the Multicast HASH table */ DEBUGOUT("Zeroing the MTA\n"); - for(i = 0; i < E1000_MC_TBL_SIZE; i++) + mta_size = E1000_MC_TBL_SIZE; + for(i = 0; i < mta_size; i++) E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); /* Set the PCI priority bit correctly in the CTRL register. This * determines if the adapter gives priority to receives, or if it - * gives equal priority to transmits and receives. + * gives equal priority to transmits and receives. Valid only on + * 82542 and 82543 silicon. */ - if(hw->dma_fairness) { + if(hw->dma_fairness && hw->mac_type <= e1000_82543) { ctrl = E1000_READ_REG(hw, CTRL); E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PRIOR); } @@ -598,9 +671,21 @@ e1000_init_hw(struct e1000_hw *hw) if(hw->mac_type > e1000_82544) { ctrl = E1000_READ_REG(hw, TXDCTL); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; + switch (hw->mac_type) { + default: + break; + case e1000_82573: + ctrl |= E1000_TXDCTL_COUNT_DESC; + break; + } E1000_WRITE_REG(hw, TXDCTL, ctrl); } + if (hw->mac_type == e1000_82573) { + e1000_enable_tx_pkt_filtering(hw); + } + + /* Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link * because the symbol error count will increment wildly if there @@ -679,7 +764,7 @@ e1000_setup_link(struct e1000_hw *hw) * control setting, then the variable hw->fc will * be initialized based on a value in the EEPROM. */ - if(e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data) < 0) { + if(e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data)) { DEBUGOUT("EEPROM Read Error\n"); return -E1000_ERR_EEPROM; } @@ -736,6 +821,7 @@ e1000_setup_link(struct e1000_hw *hw) E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW); E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH); E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE); + E1000_WRITE_REG(hw, FCTTV, hw->fc_pause_time); /* Set the flow control receive threshold registers. Normally, @@ -906,20 +992,18 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) } /****************************************************************************** -* Detects which PHY is present and the speed and duplex +* Make sure we have a valid PHY and change PHY mode before link setup. * * hw - Struct containing variables accessed by shared code ******************************************************************************/ static int32_t -e1000_setup_copper_link(struct e1000_hw *hw) +e1000_copper_link_preconfig(struct e1000_hw *hw) { uint32_t ctrl; - uint32_t led_ctrl; int32_t ret_val; - uint16_t i; uint16_t phy_data; - DEBUGFUNC("e1000_setup_copper_link"); + DEBUGFUNC("e1000_copper_link_preconfig"); ctrl = E1000_READ_REG(hw, CTRL); /* With 82543, we need to force speed and duplex on the MAC equal to what @@ -933,7 +1017,9 @@ e1000_setup_copper_link(struct e1000_hw *hw) } else { ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU); E1000_WRITE_REG(hw, CTRL, ctrl); - e1000_phy_hw_reset(hw); + ret_val = e1000_phy_hw_reset(hw); + if(ret_val) + return ret_val; } /* Make sure we have a valid PHY */ @@ -961,274 +1047,398 @@ e1000_setup_copper_link(struct e1000_hw *hw) hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) hw->phy_reset_disable = FALSE; - if(!hw->phy_reset_disable) { - if (hw->phy_type == e1000_phy_igp) { + return E1000_SUCCESS; +} - ret_val = e1000_phy_reset(hw); - if(ret_val) { - DEBUGOUT("Error Resetting the PHY\n"); - return ret_val; - } - /* Wait 10ms for MAC to configure PHY from eeprom settings */ - msec_delay(15); +/******************************************************************** +* Copper link setup for e1000_phy_igp series. +* +* hw - Struct containing variables accessed by shared code +*********************************************************************/ +static int32_t +e1000_copper_link_igp_setup(struct e1000_hw *hw) +{ + uint32_t led_ctrl; + int32_t ret_val; + uint16_t phy_data; - /* Configure activity LED after PHY reset */ - led_ctrl = E1000_READ_REG(hw, LEDCTL); - led_ctrl &= IGP_ACTIVITY_LED_MASK; - led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - E1000_WRITE_REG(hw, LEDCTL, led_ctrl); + DEBUGFUNC("e1000_copper_link_igp_setup"); - /* disable lplu d3 during driver init */ - ret_val = e1000_set_d3_lplu_state(hw, FALSE); - if(ret_val) { - DEBUGOUT("Error Disabling LPLU D3\n"); - return ret_val; - } + if (hw->phy_reset_disable) + return E1000_SUCCESS; + + ret_val = e1000_phy_reset(hw); + if (ret_val) { + DEBUGOUT("Error Resetting the PHY\n"); + return ret_val; + } - /* Configure mdi-mdix settings */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, - &phy_data); - if(ret_val) - return ret_val; + /* Wait 10ms for MAC to configure PHY from eeprom settings */ + msec_delay(15); - if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - hw->dsp_config_state = e1000_dsp_config_disabled; - /* Force MDI for earlier revs of the IGP PHY */ - phy_data &= ~(IGP01E1000_PSCR_AUTO_MDIX | - IGP01E1000_PSCR_FORCE_MDI_MDIX); - hw->mdix = 1; + /* Configure activity LED after PHY reset */ + led_ctrl = E1000_READ_REG(hw, LEDCTL); + led_ctrl &= IGP_ACTIVITY_LED_MASK; + led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); + E1000_WRITE_REG(hw, LEDCTL, led_ctrl); - } else { - hw->dsp_config_state = e1000_dsp_config_enabled; - phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; - - switch (hw->mdix) { - case 1: - phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; - break; - case 2: - phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; - break; - case 0: - default: - phy_data |= IGP01E1000_PSCR_AUTO_MDIX; - break; - } - } - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, - phy_data); - if(ret_val) - return ret_val; + /* disable lplu d3 during driver init */ + ret_val = e1000_set_d3_lplu_state(hw, FALSE); + if (ret_val) { + DEBUGOUT("Error Disabling LPLU D3\n"); + return ret_val; + } - /* set auto-master slave resolution settings */ - if(hw->autoneg) { - e1000_ms_type phy_ms_setting = hw->master_slave; + /* disable lplu d0 during driver init */ + ret_val = e1000_set_d0_lplu_state(hw, FALSE); + if (ret_val) { + DEBUGOUT("Error Disabling LPLU D0\n"); + return ret_val; + } + /* Configure mdi-mdix settings */ + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); + if (ret_val) + return ret_val; - if(hw->ffe_config_state == e1000_ffe_config_active) - hw->ffe_config_state = e1000_ffe_config_enabled; + if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { + hw->dsp_config_state = e1000_dsp_config_disabled; + /* Force MDI for earlier revs of the IGP PHY */ + phy_data &= ~(IGP01E1000_PSCR_AUTO_MDIX | IGP01E1000_PSCR_FORCE_MDI_MDIX); + hw->mdix = 1; - if(hw->dsp_config_state == e1000_dsp_config_activated) - hw->dsp_config_state = e1000_dsp_config_enabled; + } else { + hw->dsp_config_state = e1000_dsp_config_enabled; + phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; - /* when autonegotiation advertisment is only 1000Mbps then we - * should disable SmartSpeed and enable Auto MasterSlave - * resolution as hardware default. */ - if(hw->autoneg_advertised == ADVERTISE_1000_FULL) { - /* Disable SmartSpeed */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &phy_data); - if(ret_val) - return ret_val; - phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - phy_data); - if(ret_val) - return ret_val; - /* Set auto Master/Slave resolution process */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); - if(ret_val) - return ret_val; - phy_data &= ~CR_1000T_MS_ENABLE; - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); - if(ret_val) - return ret_val; - } + switch (hw->mdix) { + case 1: + phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 2: + phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 0: + default: + phy_data |= IGP01E1000_PSCR_AUTO_MDIX; + break; + } + } + ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); + if(ret_val) + return ret_val; - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); - if(ret_val) - return ret_val; + /* set auto-master slave resolution settings */ + if(hw->autoneg) { + e1000_ms_type phy_ms_setting = hw->master_slave; - /* load defaults for future use */ - hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ? - ((phy_data & CR_1000T_MS_VALUE) ? - e1000_ms_force_master : - e1000_ms_force_slave) : - e1000_ms_auto; - - switch (phy_ms_setting) { - case e1000_ms_force_master: - phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); - break; - case e1000_ms_force_slave: - phy_data |= CR_1000T_MS_ENABLE; - phy_data &= ~(CR_1000T_MS_VALUE); - break; - case e1000_ms_auto: - phy_data &= ~CR_1000T_MS_ENABLE; - default: - break; - } - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); - if(ret_val) - return ret_val; - } - } else { - /* Enable CRS on TX. This must be set for half-duplex operation. */ - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, - &phy_data); + if(hw->ffe_config_state == e1000_ffe_config_active) + hw->ffe_config_state = e1000_ffe_config_enabled; + + if(hw->dsp_config_state == e1000_dsp_config_activated) + hw->dsp_config_state = e1000_dsp_config_enabled; + + /* when autonegotiation advertisment is only 1000Mbps then we + * should disable SmartSpeed and enable Auto MasterSlave + * resolution as hardware default. */ + if(hw->autoneg_advertised == ADVERTISE_1000_FULL) { + /* Disable SmartSpeed */ + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); + if(ret_val) + return ret_val; + phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1000_write_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if(ret_val) + return ret_val; + /* Set auto Master/Slave resolution process */ + ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); + if(ret_val) + return ret_val; + phy_data &= ~CR_1000T_MS_ENABLE; + ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); if(ret_val) return ret_val; + } - phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); + if(ret_val) + return ret_val; - /* Options: - * MDI/MDI-X = 0 (default) - * 0 - Auto for all speeds - * 1 - MDI mode - * 2 - MDI-X mode - * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) - */ - phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + /* load defaults for future use */ + hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ? + ((phy_data & CR_1000T_MS_VALUE) ? + e1000_ms_force_master : + e1000_ms_force_slave) : + e1000_ms_auto; - switch (hw->mdix) { - case 1: - phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; - break; - case 2: - phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; - break; - case 3: - phy_data |= M88E1000_PSCR_AUTO_X_1000T; - break; - case 0: + switch (phy_ms_setting) { + case e1000_ms_force_master: + phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); + break; + case e1000_ms_force_slave: + phy_data |= CR_1000T_MS_ENABLE; + phy_data &= ~(CR_1000T_MS_VALUE); + break; + case e1000_ms_auto: + phy_data &= ~CR_1000T_MS_ENABLE; default: - phy_data |= M88E1000_PSCR_AUTO_X_MODE; - break; - } + break; + } + ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); + if(ret_val) + return ret_val; + } - /* Options: - * disable_polarity_correction = 0 (default) - * Automatic Correction for Reversed Cable Polarity - * 0 - Disabled - * 1 - Enabled - */ - phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; - if(hw->disable_polarity_correction == 1) - phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, - phy_data); - if(ret_val) - return ret_val; + return E1000_SUCCESS; +} - /* Force TX_CLK in the Extended PHY Specific Control Register - * to 25MHz clock. - */ - ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, - &phy_data); - if(ret_val) - return ret_val; - phy_data |= M88E1000_EPSCR_TX_CLK_25; +/******************************************************************** +* Copper link setup for e1000_phy_m88 series. +* +* hw - Struct containing variables accessed by shared code +*********************************************************************/ +static int32_t +e1000_copper_link_mgp_setup(struct e1000_hw *hw) +{ + int32_t ret_val; + uint16_t phy_data; + + DEBUGFUNC("e1000_copper_link_mgp_setup"); + + if(hw->phy_reset_disable) + return E1000_SUCCESS; + + /* Enable CRS on TX. This must be set for half-duplex operation. */ + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if(ret_val) + return ret_val; + + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + + /* Options: + * MDI/MDI-X = 0 (default) + * 0 - Auto for all speeds + * 1 - MDI mode + * 2 - MDI-X mode + * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) + */ + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + + switch (hw->mdix) { + case 1: + phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; + break; + case 2: + phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; + break; + case 3: + phy_data |= M88E1000_PSCR_AUTO_X_1000T; + break; + case 0: + default: + phy_data |= M88E1000_PSCR_AUTO_X_MODE; + break; + } + + /* Options: + * disable_polarity_correction = 0 (default) + * Automatic Correction for Reversed Cable Polarity + * 0 - Disabled + * 1 - Enabled + */ + phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; + if(hw->disable_polarity_correction == 1) + phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if(ret_val) + return ret_val; - if (hw->phy_revision < M88E1011_I_REV_4) { - /* Configure Master and Slave downshift values */ - phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | + /* Force TX_CLK in the Extended PHY Specific Control Register + * to 25MHz clock. + */ + ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); + if(ret_val) + return ret_val; + + phy_data |= M88E1000_EPSCR_TX_CLK_25; + + if (hw->phy_revision < M88E1011_I_REV_4) { + /* Configure Master and Slave downshift values */ + phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); - phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | + phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); - ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, - phy_data); - if(ret_val) - return ret_val; - } + ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); + if(ret_val) + return ret_val; + } - /* SW Reset the PHY so all changes take effect */ - ret_val = e1000_phy_reset(hw); - if(ret_val) { - DEBUGOUT("Error Resetting the PHY\n"); - return ret_val; - } + /* SW Reset the PHY so all changes take effect */ + ret_val = e1000_phy_reset(hw); + if(ret_val) { + DEBUGOUT("Error Resetting the PHY\n"); + return ret_val; + } + + return E1000_SUCCESS; +} + +/******************************************************************** +* Setup auto-negotiation and flow control advertisements, +* and then perform auto-negotiation. +* +* hw - Struct containing variables accessed by shared code +*********************************************************************/ +static int32_t +e1000_copper_link_autoneg(struct e1000_hw *hw) +{ + int32_t ret_val; + uint16_t phy_data; + + DEBUGFUNC("e1000_copper_link_autoneg"); + + /* Perform some bounds checking on the hw->autoneg_advertised + * parameter. If this variable is zero, then set it to the default. + */ + hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT; + + /* If autoneg_advertised is zero, we assume it was not defaulted + * by the calling code so we set to advertise full capability. + */ + if(hw->autoneg_advertised == 0) + hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT; + + DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); + ret_val = e1000_phy_setup_autoneg(hw); + if(ret_val) { + DEBUGOUT("Error Setting up Auto-Negotiation\n"); + return ret_val; + } + DEBUGOUT("Restarting Auto-Neg\n"); + + /* Restart auto-negotiation by setting the Auto Neg Enable bit and + * the Auto Neg Restart bit in the PHY control register. + */ + ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); + if(ret_val) + return ret_val; + + phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); + ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); + if(ret_val) + return ret_val; + + /* Does the user want to wait for Auto-Neg to complete here, or + * check at a later time (for example, callback routine). + */ + if(hw->wait_autoneg_complete) { + ret_val = e1000_wait_autoneg(hw); + if(ret_val) { + DEBUGOUT("Error while waiting for autoneg to complete\n"); + return ret_val; } + } - /* Options: - * autoneg = 1 (default) - * PHY will advertise value(s) parsed from - * autoneg_advertised and fc - * autoneg = 0 - * PHY will be set to 10H, 10F, 100H, or 100F - * depending on value parsed from forced_speed_duplex. - */ + hw->get_link_status = TRUE; - /* Is autoneg enabled? This is enabled by default or by software - * override. If so, call e1000_phy_setup_autoneg routine to parse the - * autoneg_advertised and fc options. If autoneg is NOT enabled, then - * the user should have provided a speed/duplex override. If so, then - * call e1000_phy_force_speed_duplex to parse and set this up. - */ - if(hw->autoneg) { - /* Perform some bounds checking on the hw->autoneg_advertised - * parameter. If this variable is zero, then set it to the default. - */ - hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT; + return E1000_SUCCESS; +} - /* If autoneg_advertised is zero, we assume it was not defaulted - * by the calling code so we set to advertise full capability. - */ - if(hw->autoneg_advertised == 0) - hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT; - DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); - ret_val = e1000_phy_setup_autoneg(hw); - if(ret_val) { - DEBUGOUT("Error Setting up Auto-Negotiation\n"); - return ret_val; - } - DEBUGOUT("Restarting Auto-Neg\n"); +/****************************************************************************** +* Config the MAC and the PHY after link is up. +* 1) Set up the MAC to the current PHY speed/duplex +* if we are on 82543. If we +* are on newer silicon, we only need to configure +* collision distance in the Transmit Control Register. +* 2) Set up flow control on the MAC to that established with +* the link partner. +* 3) Config DSP to improve Gigabit link quality for some PHY revisions. +* +* hw - Struct containing variables accessed by shared code +******************************************************************************/ +static int32_t +e1000_copper_link_postconfig(struct e1000_hw *hw) +{ + int32_t ret_val; + DEBUGFUNC("e1000_copper_link_postconfig"); + + if(hw->mac_type >= e1000_82544) { + e1000_config_collision_dist(hw); + } else { + ret_val = e1000_config_mac_to_phy(hw); + if(ret_val) { + DEBUGOUT("Error configuring MAC to PHY settings\n"); + return ret_val; + } + } + ret_val = e1000_config_fc_after_link_up(hw); + if(ret_val) { + DEBUGOUT("Error Configuring Flow Control\n"); + return ret_val; + } - /* Restart auto-negotiation by setting the Auto Neg Enable bit and - * the Auto Neg Restart bit in the PHY control register. - */ - ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); - if(ret_val) - return ret_val; + /* Config DSP to improve Giga link quality */ + if(hw->phy_type == e1000_phy_igp) { + ret_val = e1000_config_dsp_after_link_change(hw, TRUE); + if(ret_val) { + DEBUGOUT("Error Configuring DSP after link up\n"); + return ret_val; + } + } + + return E1000_SUCCESS; +} - phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); - ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); - if(ret_val) - return ret_val; +/****************************************************************************** +* Detects which PHY is present and setup the speed and duplex +* +* hw - Struct containing variables accessed by shared code +******************************************************************************/ +static int32_t +e1000_setup_copper_link(struct e1000_hw *hw) +{ + int32_t ret_val; + uint16_t i; + uint16_t phy_data; - /* Does the user want to wait for Auto-Neg to complete here, or - * check at a later time (for example, callback routine). - */ - if(hw->wait_autoneg_complete) { - ret_val = e1000_wait_autoneg(hw); - if(ret_val) { - DEBUGOUT("Error while waiting for autoneg to complete\n"); - return ret_val; - } - } - hw->get_link_status = TRUE; - } else { - DEBUGOUT("Forcing speed and duplex\n"); - ret_val = e1000_phy_force_speed_duplex(hw); - if(ret_val) { - DEBUGOUT("Error Forcing Speed and Duplex\n"); - return ret_val; - } + DEBUGFUNC("e1000_setup_copper_link"); + + /* Check if it is a valid PHY and set PHY mode if necessary. */ + ret_val = e1000_copper_link_preconfig(hw); + if(ret_val) + return ret_val; + + if (hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) { + ret_val = e1000_copper_link_igp_setup(hw); + if(ret_val) + return ret_val; + } else if (hw->phy_type == e1000_phy_m88) { + ret_val = e1000_copper_link_mgp_setup(hw); + if(ret_val) + return ret_val; + } + + if(hw->autoneg) { + /* Setup autoneg and flow control advertisement + * and perform autonegotiation */ + ret_val = e1000_copper_link_autoneg(hw); + if(ret_val) + return ret_val; + } else { + /* PHY will be set to 10H, 10F, 100H,or 100F + * depending on value from forced_speed_duplex. */ + DEBUGOUT("Forcing speed and duplex\n"); + ret_val = e1000_phy_force_speed_duplex(hw); + if(ret_val) { + DEBUGOUT("Error Forcing Speed and Duplex\n"); + return ret_val; } - } /* !hw->phy_reset_disable */ + } /* Check link status. Wait up to 100 microseconds for link to become * valid. @@ -1242,37 +1452,11 @@ e1000_setup_copper_link(struct e1000_hw *hw) return ret_val; if(phy_data & MII_SR_LINK_STATUS) { - /* We have link, so we need to finish the config process: - * 1) Set up the MAC to the current PHY speed/duplex - * if we are on 82543. If we - * are on newer silicon, we only need to configure - * collision distance in the Transmit Control Register. - * 2) Set up flow control on the MAC to that established with - * the link partner. - */ - if(hw->mac_type >= e1000_82544) { - e1000_config_collision_dist(hw); - } else { - ret_val = e1000_config_mac_to_phy(hw); - if(ret_val) { - DEBUGOUT("Error configuring MAC to PHY settings\n"); - return ret_val; - } - } - ret_val = e1000_config_fc_after_link_up(hw); - if(ret_val) { - DEBUGOUT("Error Configuring Flow Control\n"); + /* Config the MAC and PHY after link is up */ + ret_val = e1000_copper_link_postconfig(hw); + if(ret_val) return ret_val; - } - DEBUGOUT("Valid link established!!!\n"); - - if(hw->phy_type == e1000_phy_igp) { - ret_val = e1000_config_dsp_after_link_change(hw, TRUE); - if(ret_val) { - DEBUGOUT("Error Configuring DSP after link up\n"); - return ret_val; - } - } + DEBUGOUT("Valid link established!!!\n"); return E1000_SUCCESS; } @@ -1302,10 +1486,10 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) if(ret_val) return ret_val; - /* Read the MII 1000Base-T Control Register (Address 9). */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); - if(ret_val) - return ret_val; + /* Read the MII 1000Base-T Control Register (Address 9). */ + ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); + if(ret_val) + return ret_val; /* Need to parse both autoneg_advertised and fc and set up * the appropriate PHY registers. First we will parse for @@ -1417,7 +1601,7 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); + ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); if(ret_val) return ret_val; @@ -1678,6 +1862,11 @@ e1000_config_mac_to_phy(struct e1000_hw *hw) DEBUGFUNC("e1000_config_mac_to_phy"); + /* 82544 or newer MAC, Auto Speed Detection takes care of + * MAC speed/duplex configuration.*/ + if (hw->mac_type >= e1000_82544) + return E1000_SUCCESS; + /* Read the Device Control Register and set the bits to Force Speed * and Duplex. */ @@ -1688,45 +1877,25 @@ e1000_config_mac_to_phy(struct e1000_hw *hw) /* Set up duplex in the Device Control and Transmit Control * registers depending on negotiated values. */ - if (hw->phy_type == e1000_phy_igp) { - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, - &phy_data); - if(ret_val) - return ret_val; - - if(phy_data & IGP01E1000_PSSR_FULL_DUPLEX) ctrl |= E1000_CTRL_FD; - else ctrl &= ~E1000_CTRL_FD; - - e1000_config_collision_dist(hw); + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + if(ret_val) + return ret_val; - /* Set up speed in the Device Control register depending on - * negotiated values. - */ - if((phy_data & IGP01E1000_PSSR_SPEED_MASK) == - IGP01E1000_PSSR_SPEED_1000MBPS) - ctrl |= E1000_CTRL_SPD_1000; - else if((phy_data & IGP01E1000_PSSR_SPEED_MASK) == - IGP01E1000_PSSR_SPEED_100MBPS) - ctrl |= E1000_CTRL_SPD_100; - } else { - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, - &phy_data); - if(ret_val) - return ret_val; + if(phy_data & M88E1000_PSSR_DPLX) + ctrl |= E1000_CTRL_FD; + else + ctrl &= ~E1000_CTRL_FD; - if(phy_data & M88E1000_PSSR_DPLX) ctrl |= E1000_CTRL_FD; - else ctrl &= ~E1000_CTRL_FD; + e1000_config_collision_dist(hw); - e1000_config_collision_dist(hw); + /* Set up speed in the Device Control register depending on + * negotiated values. + */ + if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) + ctrl |= E1000_CTRL_SPD_1000; + else if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS) + ctrl |= E1000_CTRL_SPD_100; - /* Set up speed in the Device Control register depending on - * negotiated values. - */ - if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) - ctrl |= E1000_CTRL_SPD_1000; - else if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS) - ctrl |= E1000_CTRL_SPD_100; - } /* Write the configured values back to the Device Control Reg. */ E1000_WRITE_REG(hw, CTRL, ctrl); return E1000_SUCCESS; @@ -2494,8 +2663,8 @@ e1000_read_phy_reg(struct e1000_hw *hw, DEBUGFUNC("e1000_read_phy_reg"); - - if(hw->phy_type == e1000_phy_igp && + if((hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) && (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, (uint16_t)reg_addr); @@ -2600,8 +2769,8 @@ e1000_write_phy_reg(struct e1000_hw *hw, DEBUGFUNC("e1000_write_phy_reg"); - - if(hw->phy_type == e1000_phy_igp && + if((hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) && (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, (uint16_t)reg_addr); @@ -2679,19 +2848,27 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, return E1000_SUCCESS; } + /****************************************************************************** * Returns the PHY to the power-on reset state * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -void +int32_t e1000_phy_hw_reset(struct e1000_hw *hw) { uint32_t ctrl, ctrl_ext; uint32_t led_ctrl; + int32_t ret_val; DEBUGFUNC("e1000_phy_hw_reset"); + /* In the case of the phy reset being blocked, it's not an error, we + * simply return success without performing the reset. */ + ret_val = e1000_check_phy_reset_block(hw); + if (ret_val) + return E1000_SUCCESS; + DEBUGOUT("Resetting Phy...\n"); if(hw->mac_type > e1000_82543) { @@ -2727,6 +2904,11 @@ e1000_phy_hw_reset(struct e1000_hw *hw) led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); E1000_WRITE_REG(hw, LEDCTL, led_ctrl); } + + /* Wait for FW to finish PHY configuration. */ + ret_val = e1000_get_phy_cfg_done(hw); + + return ret_val; } /****************************************************************************** @@ -2744,7 +2926,19 @@ e1000_phy_reset(struct e1000_hw *hw) DEBUGFUNC("e1000_phy_reset"); - if(hw->mac_type != e1000_82541_rev_2) { + /* In the case of the phy reset being blocked, it's not an error, we + * simply return success without performing the reset. */ + ret_val = e1000_check_phy_reset_block(hw); + if (ret_val) + return E1000_SUCCESS; + + switch (hw->mac_type) { + case e1000_82541_rev_2: + ret_val = e1000_phy_hw_reset(hw); + if(ret_val) + return ret_val; + break; + default: ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); if(ret_val) return ret_val; @@ -2755,9 +2949,10 @@ e1000_phy_reset(struct e1000_hw *hw) return ret_val; udelay(1); - } else e1000_phy_hw_reset(hw); + break; + } - if(hw->phy_type == e1000_phy_igp) + if(hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_2) e1000_phy_init_script(hw); return E1000_SUCCESS; @@ -2811,6 +3006,9 @@ e1000_detect_gig_phy(struct e1000_hw *hw) case e1000_82547_rev_2: if(hw->phy_id == IGP01E1000_I_PHY_ID) match = TRUE; break; + case e1000_82573: + if(hw->phy_id == M88E1111_I_PHY_ID) match = TRUE; + break; default: DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type); return -E1000_ERR_CONFIG; @@ -2866,7 +3064,7 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, /* The downshift status is checked only once, after link is established, * and it stored in the hw->speed_downgraded parameter. */ - phy_info->downshift = hw->speed_downgraded; + phy_info->downshift = (e1000_downshift)hw->speed_downgraded; /* IGP01E1000 does not need to support it. */ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal; @@ -2905,7 +3103,7 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, if(ret_val) return ret_val; - /* transalte to old method */ + /* Translate to old method */ average = (max_length + min_length) / 2; if(average <= e1000_igp_cable_length_50) @@ -2940,7 +3138,7 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, /* The downshift status is checked only once, after link is established, * and it stored in the hw->speed_downgraded parameter. */ - phy_info->downshift = hw->speed_downgraded; + phy_info->downshift = (e1000_downshift)hw->speed_downgraded; ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); if(ret_val) @@ -3029,7 +3227,8 @@ e1000_phy_get_info(struct e1000_hw *hw, return -E1000_ERR_CONFIG; } - if(hw->phy_type == e1000_phy_igp) + if(hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) return e1000_phy_igp_get_info(hw, phy_info); else return e1000_phy_m88_get_info(hw, phy_info); @@ -3055,11 +3254,12 @@ e1000_validate_mdi_setting(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -void +int32_t e1000_init_eeprom_params(struct e1000_hw *hw) { struct e1000_eeprom_info *eeprom = &hw->eeprom; uint32_t eecd = E1000_READ_REG(hw, EECD); + int32_t ret_val = E1000_SUCCESS; uint16_t eeprom_size; DEBUGFUNC("e1000_init_eeprom_params"); @@ -3074,6 +3274,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->opcode_bits = 3; eeprom->address_bits = 6; eeprom->delay_usec = 50; + eeprom->use_eerd = FALSE; + eeprom->use_eewr = FALSE; break; case e1000_82540: case e1000_82545: @@ -3090,6 +3292,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->word_size = 64; eeprom->address_bits = 6; } + eeprom->use_eerd = FALSE; + eeprom->use_eewr = FALSE; break; case e1000_82541: case e1000_82541_rev_2: @@ -3118,42 +3322,60 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->address_bits = 6; } } + eeprom->use_eerd = FALSE; + eeprom->use_eewr = FALSE; + break; + case e1000_82573: + eeprom->type = e1000_eeprom_spi; + eeprom->opcode_bits = 8; + eeprom->delay_usec = 1; + if (eecd & E1000_EECD_ADDR_BITS) { + eeprom->page_size = 32; + eeprom->address_bits = 16; + } else { + eeprom->page_size = 8; + eeprom->address_bits = 8; + } + eeprom->use_eerd = TRUE; + eeprom->use_eewr = TRUE; + if(e1000_is_onboard_nvm_eeprom(hw) == FALSE) { + eeprom->type = e1000_eeprom_flash; + eeprom->word_size = 2048; + + /* Ensure that the Autonomous FLASH update bit is cleared due to + * Flash update issue on parts which use a FLASH for NVM. */ + eecd &= ~E1000_EECD_AUPDEN; + E1000_WRITE_REG(hw, EECD, eecd); + } break; default: break; } if (eeprom->type == e1000_eeprom_spi) { - eeprom->word_size = 64; - if (e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size) == 0) { - eeprom_size &= EEPROM_SIZE_MASK; - - switch (eeprom_size) { - case EEPROM_SIZE_16KB: - eeprom->word_size = 8192; - break; - case EEPROM_SIZE_8KB: - eeprom->word_size = 4096; - break; - case EEPROM_SIZE_4KB: - eeprom->word_size = 2048; - break; - case EEPROM_SIZE_2KB: - eeprom->word_size = 1024; - break; - case EEPROM_SIZE_1KB: - eeprom->word_size = 512; - break; - case EEPROM_SIZE_512B: - eeprom->word_size = 256; - break; - case EEPROM_SIZE_128B: - default: - eeprom->word_size = 64; - break; - } + /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to + * 32KB (incremented by powers of 2). + */ + if(hw->mac_type <= e1000_82547_rev_2) { + /* Set to default value for initial eeprom read. */ + eeprom->word_size = 64; + ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size); + if(ret_val) + return ret_val; + eeprom_size = (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT; + /* 256B eeprom size was not supported in earlier hardware, so we + * bump eeprom_size up one to ensure that "1" (which maps to 256B) + * is never the result used in the shifting logic below. */ + if(eeprom_size) + eeprom_size++; + } else { + eeprom_size = (uint16_t)((eecd & E1000_EECD_SIZE_EX_MASK) >> + E1000_EECD_SIZE_EX_SHIFT); } + + eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT); } + return ret_val; } /****************************************************************************** @@ -3306,8 +3528,12 @@ e1000_acquire_eeprom(struct e1000_hw *hw) DEBUGFUNC("e1000_acquire_eeprom"); + if(e1000_get_hw_eeprom_semaphore(hw)) + return -E1000_ERR_EEPROM; + eecd = E1000_READ_REG(hw, EECD); + if (hw->mac_type != e1000_82573) { /* Request EEPROM Access */ if(hw->mac_type > e1000_82544) { eecd |= E1000_EECD_REQ; @@ -3326,6 +3552,7 @@ e1000_acquire_eeprom(struct e1000_hw *hw) return -E1000_ERR_EEPROM; } } + } /* Setup EEPROM for Read/Write */ @@ -3443,6 +3670,8 @@ e1000_release_eeprom(struct e1000_hw *hw) eecd &= ~E1000_EECD_REQ; E1000_WRITE_REG(hw, EECD, eecd); } + + e1000_put_hw_eeprom_semaphore(hw); } /****************************************************************************** @@ -3504,8 +3733,10 @@ e1000_read_eeprom(struct e1000_hw *hw, { struct e1000_eeprom_info *eeprom = &hw->eeprom; uint32_t i = 0; + int32_t ret_val; DEBUGFUNC("e1000_read_eeprom"); + /* A check for invalid values: offset too large, too many words, and not * enough words. */ @@ -3515,9 +3746,23 @@ e1000_read_eeprom(struct e1000_hw *hw, return -E1000_ERR_EEPROM; } - /* Prepare the EEPROM for reading */ - if(e1000_acquire_eeprom(hw) != E1000_SUCCESS) - return -E1000_ERR_EEPROM; + /* FLASH reads without acquiring the semaphore are safe in 82573-based + * controllers. + */ + if ((e1000_is_onboard_nvm_eeprom(hw) == TRUE) || + (hw->mac_type != e1000_82573)) { + /* Prepare the EEPROM for reading */ + if(e1000_acquire_eeprom(hw) != E1000_SUCCESS) + return -E1000_ERR_EEPROM; + } + + if(eeprom->use_eerd == TRUE) { + ret_val = e1000_read_eeprom_eerd(hw, offset, words, data); + if ((e1000_is_onboard_nvm_eeprom(hw) == TRUE) || + (hw->mac_type != e1000_82573)) + e1000_release_eeprom(hw); + return ret_val; + } if(eeprom->type == e1000_eeprom_spi) { uint16_t word_in; @@ -3569,6 +3814,132 @@ e1000_read_eeprom(struct e1000_hw *hw, } /****************************************************************************** + * Reads a 16 bit word from the EEPROM using the EERD register. + * + * hw - Struct containing variables accessed by shared code + * offset - offset of word in the EEPROM to read + * data - word read from the EEPROM + * words - number of words to read + *****************************************************************************/ +int32_t +e1000_read_eeprom_eerd(struct e1000_hw *hw, + uint16_t offset, + uint16_t words, + uint16_t *data) +{ + uint32_t i, eerd = 0; + int32_t error = 0; + + for (i = 0; i < words; i++) { + eerd = ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) + + E1000_EEPROM_RW_REG_START; + + E1000_WRITE_REG(hw, EERD, eerd); + error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ); + + if(error) { + break; + } + data[i] = (E1000_READ_REG(hw, EERD) >> E1000_EEPROM_RW_REG_DATA); + + } + + return error; +} + +/****************************************************************************** + * Writes a 16 bit word from the EEPROM using the EEWR register. + * + * hw - Struct containing variables accessed by shared code + * offset - offset of word in the EEPROM to read + * data - word read from the EEPROM + * words - number of words to read + *****************************************************************************/ +int32_t +e1000_write_eeprom_eewr(struct e1000_hw *hw, + uint16_t offset, + uint16_t words, + uint16_t *data) +{ + uint32_t register_value = 0; + uint32_t i = 0; + int32_t error = 0; + + for (i = 0; i < words; i++) { + register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) | + ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) | + E1000_EEPROM_RW_REG_START; + + error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE); + if(error) { + break; + } + + E1000_WRITE_REG(hw, EEWR, register_value); + + error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE); + + if(error) { + break; + } + } + + return error; +} + +/****************************************************************************** + * Polls the status bit (bit 1) of the EERD to determine when the read is done. + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +int32_t +e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd) +{ + uint32_t attempts = 100000; + uint32_t i, reg = 0; + int32_t done = E1000_ERR_EEPROM; + + for(i = 0; i < attempts; i++) { + if(eerd == E1000_EEPROM_POLL_READ) + reg = E1000_READ_REG(hw, EERD); + else + reg = E1000_READ_REG(hw, EEWR); + + if(reg & E1000_EEPROM_RW_REG_DONE) { + done = E1000_SUCCESS; + break; + } + udelay(5); + } + + return done; +} + +/*************************************************************************** +* Description: Determines if the onboard NVM is FLASH or EEPROM. +* +* hw - Struct containing variables accessed by shared code +****************************************************************************/ +boolean_t +e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) +{ + uint32_t eecd = 0; + + if(hw->mac_type == e1000_82573) { + eecd = E1000_READ_REG(hw, EECD); + + /* Isolate bits 15 & 16 */ + eecd = ((eecd >> 15) & 0x03); + + /* If both bits are set, device is Flash type */ + if(eecd == 0x03) { + return FALSE; + } + } + return TRUE; +} + +/****************************************************************************** * Verifies that the EEPROM has a valid checksum * * hw - Struct containing variables accessed by shared code @@ -3585,6 +3956,25 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw) DEBUGFUNC("e1000_validate_eeprom_checksum"); + if ((hw->mac_type == e1000_82573) && + (e1000_is_onboard_nvm_eeprom(hw) == FALSE)) { + /* Check bit 4 of word 10h. If it is 0, firmware is done updating + * 10h-12h. Checksum may need to be fixed. */ + e1000_read_eeprom(hw, 0x10, 1, &eeprom_data); + if ((eeprom_data & 0x10) == 0) { + /* Read 0x23 and check bit 15. This bit is a 1 when the checksum + * has already been fixed. If the checksum is still wrong and this + * bit is a 1, we need to return bad checksum. Otherwise, we need + * to set this bit to a 1 and update the checksum. */ + e1000_read_eeprom(hw, 0x23, 1, &eeprom_data); + if ((eeprom_data & 0x8000) == 0) { + eeprom_data |= 0x8000; + e1000_write_eeprom(hw, 0x23, 1, &eeprom_data); + e1000_update_eeprom_checksum(hw); + } + } + } + for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { if(e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { DEBUGOUT("EEPROM Read Error\n"); @@ -3628,6 +4018,8 @@ e1000_update_eeprom_checksum(struct e1000_hw *hw) if(e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) { DEBUGOUT("EEPROM Write Error\n"); return -E1000_ERR_EEPROM; + } else if (hw->eeprom.type == e1000_eeprom_flash) { + e1000_commit_shadow_ram(hw); } return E1000_SUCCESS; } @@ -3663,6 +4055,10 @@ e1000_write_eeprom(struct e1000_hw *hw, return -E1000_ERR_EEPROM; } + /* 82573 reads only through eerd */ + if(eeprom->use_eewr == TRUE) + return e1000_write_eeprom_eewr(hw, offset, words, data); + /* Prepare the EEPROM for writing */ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) return -E1000_ERR_EEPROM; @@ -3833,6 +4229,65 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw, } /****************************************************************************** + * Flushes the cached eeprom to NVM. This is done by saving the modified values + * in the eeprom cache and the non modified values in the currently active bank + * to the new bank. + * + * hw - Struct containing variables accessed by shared code + * offset - offset of word in the EEPROM to read + * data - word read from the EEPROM + * words - number of words to read + *****************************************************************************/ +int32_t +e1000_commit_shadow_ram(struct e1000_hw *hw) +{ + uint32_t attempts = 100000; + uint32_t eecd = 0; + uint32_t flop = 0; + uint32_t i = 0; + int32_t error = E1000_SUCCESS; + + /* The flop register will be used to determine if flash type is STM */ + flop = E1000_READ_REG(hw, FLOP); + + if (hw->mac_type == e1000_82573) { + for (i=0; i < attempts; i++) { + eecd = E1000_READ_REG(hw, EECD); + if ((eecd & E1000_EECD_FLUPD) == 0) { + break; + } + udelay(5); + } + + if (i == attempts) { + return -E1000_ERR_EEPROM; + } + + /* If STM opcode located in bits 15:8 of flop, reset firmware */ + if ((flop & 0xFF00) == E1000_STM_OPCODE) { + E1000_WRITE_REG(hw, HICR, E1000_HICR_FW_RESET); + } + + /* Perform the flash update */ + E1000_WRITE_REG(hw, EECD, eecd | E1000_EECD_FLUPD); + + for (i=0; i < attempts; i++) { + eecd = E1000_READ_REG(hw, EECD); + if ((eecd & E1000_EECD_FLUPD) == 0) { + break; + } + udelay(5); + } + + if (i == attempts) { + return -E1000_ERR_EEPROM; + } + } + + return error; +} + +/****************************************************************************** * Reads the adapter's part number from the EEPROM * * hw - Struct containing variables accessed by shared code @@ -3911,6 +4366,7 @@ void e1000_init_rx_addrs(struct e1000_hw *hw) { uint32_t i; + uint32_t rar_num; DEBUGFUNC("e1000_init_rx_addrs"); @@ -3919,9 +4375,10 @@ e1000_init_rx_addrs(struct e1000_hw *hw) e1000_rar_set(hw, hw->mac_addr, 0); + rar_num = E1000_RAR_ENTRIES; /* Zero out the other 15 receive addresses. */ DEBUGOUT("Clearing RAR[1-15]\n"); - for(i = 1; i < E1000_RAR_ENTRIES; i++) { + for(i = 1; i < rar_num; i++) { E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); } @@ -3950,7 +4407,9 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, { uint32_t hash_value; uint32_t i; - + uint32_t num_rar_entry; + uint32_t num_mta_entry; + DEBUGFUNC("e1000_mc_addr_list_update"); /* Set the new number of MC addresses that we are being requested to use. */ @@ -3958,14 +4417,16 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, /* Clear RAR[1-15] */ DEBUGOUT(" Clearing RAR[1-15]\n"); - for(i = rar_used_count; i < E1000_RAR_ENTRIES; i++) { + num_rar_entry = E1000_RAR_ENTRIES; + for(i = rar_used_count; i < num_rar_entry; i++) { E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); } /* Clear the MTA */ DEBUGOUT(" Clearing MTA\n"); - for(i = 0; i < E1000_NUM_MTA_REGISTERS; i++) { + num_mta_entry = E1000_NUM_MTA_REGISTERS; + for(i = 0; i < num_mta_entry; i++) { E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); } @@ -3989,7 +4450,7 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, /* Place this multicast address in the RAR if there is room, * * else put it in the MTA */ - if(rar_used_count < E1000_RAR_ENTRIES) { + if (rar_used_count < num_rar_entry) { e1000_rar_set(hw, mc_addr_list + (i * (ETH_LENGTH_OF_ADDRESS + pad)), rar_used_count); @@ -4040,6 +4501,7 @@ e1000_hash_mc_addr(struct e1000_hw *hw, } hash_value &= 0xFFF; + return hash_value; } @@ -4144,12 +4606,33 @@ void e1000_clear_vfta(struct e1000_hw *hw) { uint32_t offset; - - for(offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) - E1000_WRITE_REG_ARRAY(hw, VFTA, offset, 0); + uint32_t vfta_value = 0; + uint32_t vfta_offset = 0; + uint32_t vfta_bit_in_reg = 0; + + if (hw->mac_type == e1000_82573) { + if (hw->mng_cookie.vlan_id != 0) { + /* The VFTA is a 4096b bit-field, each identifying a single VLAN + * ID. The following operations determine which 32b entry + * (i.e. offset) into the array we want to set the VLAN ID + * (i.e. bit) of the manageability unit. */ + vfta_offset = (hw->mng_cookie.vlan_id >> + E1000_VFTA_ENTRY_SHIFT) & + E1000_VFTA_ENTRY_MASK; + vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id & + E1000_VFTA_ENTRY_BIT_SHIFT_MASK); + } + } + for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { + /* If the offset we want to clear is the same offset of the + * manageability VLAN ID, then clear all bits except that of the + * manageability unit */ + vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0; + E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value); + } } -static int32_t +int32_t e1000_id_led_init(struct e1000_hw * hw) { uint32_t ledctl; @@ -4480,6 +4963,19 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw) temp = E1000_READ_REG(hw, MGTPRC); temp = E1000_READ_REG(hw, MGTPDC); temp = E1000_READ_REG(hw, MGTPTC); + + if(hw->mac_type <= e1000_82547_rev_2) return; + + temp = E1000_READ_REG(hw, IAC); + temp = E1000_READ_REG(hw, ICRXOC); + temp = E1000_READ_REG(hw, ICRXPTC); + temp = E1000_READ_REG(hw, ICRXATC); + temp = E1000_READ_REG(hw, ICTXPTC); + temp = E1000_READ_REG(hw, ICTXATC); + temp = E1000_READ_REG(hw, ICTXQEC); + temp = E1000_READ_REG(hw, ICTXQMTC); + temp = E1000_READ_REG(hw, ICRXDMTC); + } /****************************************************************************** @@ -4646,6 +5142,11 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_speed = e1000_bus_speed_unknown; hw->bus_width = e1000_bus_width_unknown; break; + case e1000_82573: + hw->bus_type = e1000_bus_type_pci_express; + hw->bus_speed = e1000_bus_speed_2500; + hw->bus_width = e1000_bus_width_pciex_4; + break; default: status = E1000_READ_REG(hw, STATUS); hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ? @@ -4749,6 +5250,7 @@ e1000_get_cable_length(struct e1000_hw *hw, /* Use old method for Phy older than IGP */ if(hw->phy_type == e1000_phy_m88) { + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); if(ret_val) @@ -4865,7 +5367,8 @@ e1000_check_polarity(struct e1000_hw *hw, return ret_val; *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY) >> M88E1000_PSSR_REV_POLARITY_SHIFT; - } else if(hw->phy_type == e1000_phy_igp) { + } else if(hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) { /* Read the Status register to check the speed */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data); @@ -4917,7 +5420,8 @@ e1000_check_downshift(struct e1000_hw *hw) DEBUGFUNC("e1000_check_downshift"); - if(hw->phy_type == e1000_phy_igp) { + if(hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH, &phy_data); if(ret_val) @@ -4933,6 +5437,7 @@ e1000_check_downshift(struct e1000_hw *hw) hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >> M88E1000_PSSR_DOWNSHIFT_SHIFT; } + return E1000_SUCCESS; } @@ -5047,7 +5552,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if(ret_val) return ret_val; - msec_delay(20); + msec_delay_irq(20); ret_val = e1000_write_phy_reg(hw, 0x0000, IGP01E1000_IEEE_FORCE_GIGA); @@ -5071,7 +5576,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if(ret_val) return ret_val; - msec_delay(20); + msec_delay_irq(20); /* Now enable the transmitter */ ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); @@ -5096,7 +5601,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if(ret_val) return ret_val; - msec_delay(20); + msec_delay_irq(20); ret_val = e1000_write_phy_reg(hw, 0x0000, IGP01E1000_IEEE_FORCE_GIGA); @@ -5112,7 +5617,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if(ret_val) return ret_val; - msec_delay(20); + msec_delay_irq(20); /* Now enable the transmitter */ ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); @@ -5187,22 +5692,36 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, uint16_t phy_data; DEBUGFUNC("e1000_set_d3_lplu_state"); - if(!((hw->mac_type == e1000_82541_rev_2) || - (hw->mac_type == e1000_82547_rev_2))) + if(hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2) return E1000_SUCCESS; /* During driver activity LPLU should not be used or it will attain link * from the lowest speeds starting from 10Mbps. The capability is used for * Dx transitions and states */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data); - if(ret_val) - return ret_val; - - if(!active) { - phy_data &= ~IGP01E1000_GMII_FLEX_SPD; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); + if(hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) { + ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data); if(ret_val) return ret_val; + } else { + ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); + if(ret_val) + return ret_val; + } + + if(!active) { + if(hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547_rev_2) { + phy_data &= ~IGP01E1000_GMII_FLEX_SPD; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); + if(ret_val) + return ret_val; + } else { + phy_data &= ~IGP02E1000_PM_D3_LPLU; + ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, + phy_data); + if (ret_val) + return ret_val; + } /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during * Dx states where the power conservation is most important. During @@ -5236,11 +5755,105 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL ) || (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) { - phy_data |= IGP01E1000_GMII_FLEX_SPD; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); + if(hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547_rev_2) { + phy_data |= IGP01E1000_GMII_FLEX_SPD; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); + if(ret_val) + return ret_val; + } else { + phy_data |= IGP02E1000_PM_D3_LPLU; + ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, + phy_data); + if (ret_val) + return ret_val; + } + + /* When LPLU is enabled we should disable SmartSpeed */ + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); + if(ret_val) + return ret_val; + + phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data); if(ret_val) return ret_val; + } + return E1000_SUCCESS; +} + +/***************************************************************************** + * + * This function sets the lplu d0 state according to the active flag. When + * activating lplu this function also disables smart speed and vise versa. + * lplu will not be activated unless the device autonegotiation advertisment + * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes. + * hw: Struct containing variables accessed by shared code + * active - true to enable lplu false to disable lplu. + * + * returns: - E1000_ERR_PHY if fail to read/write the PHY + * E1000_SUCCESS at any other case. + * + ****************************************************************************/ + +int32_t +e1000_set_d0_lplu_state(struct e1000_hw *hw, + boolean_t active) +{ + int32_t ret_val; + uint16_t phy_data; + DEBUGFUNC("e1000_set_d0_lplu_state"); + + if(hw->mac_type <= e1000_82547_rev_2) + return E1000_SUCCESS; + + ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); + if(ret_val) + return ret_val; + + if (!active) { + phy_data &= ~IGP02E1000_PM_D0_LPLU; + ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); + if (ret_val) + return ret_val; + + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during + * Dx states where the power conservation is most important. During + * driver activity we should enable SmartSpeed, so performance is + * maintained. */ + if (hw->smart_speed == e1000_smart_speed_on) { + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &phy_data); + if(ret_val) + return ret_val; + + phy_data |= IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if(ret_val) + return ret_val; + } else if (hw->smart_speed == e1000_smart_speed_off) { + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if(ret_val) + return ret_val; + } + + + } else { + + phy_data |= IGP02E1000_PM_D0_LPLU; + ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); + if (ret_val) + return ret_val; + /* When LPLU is enabled we should disable SmartSpeed */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); if(ret_val) @@ -5318,6 +5931,338 @@ e1000_set_vco_speed(struct e1000_hw *hw) return E1000_SUCCESS; } + +/***************************************************************************** + * This function reads the cookie from ARC ram. + * + * returns: - E1000_SUCCESS . + ****************************************************************************/ +int32_t +e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer) +{ + uint8_t i; + uint32_t offset = E1000_MNG_DHCP_COOKIE_OFFSET; + uint8_t length = E1000_MNG_DHCP_COOKIE_LENGTH; + + length = (length >> 2); + offset = (offset >> 2); + + for (i = 0; i < length; i++) { + *((uint32_t *) buffer + i) = + E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset + i); + } + return E1000_SUCCESS; +} + + +/***************************************************************************** + * This function checks whether the HOST IF is enabled for command operaton + * and also checks whether the previous command is completed. + * It busy waits in case of previous command is not completed. + * + * returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or + * timeout + * - E1000_SUCCESS for success. + ****************************************************************************/ +int32_t +e1000_mng_enable_host_if(struct e1000_hw * hw) +{ + uint32_t hicr; + uint8_t i; + + /* Check that the host interface is enabled. */ + hicr = E1000_READ_REG(hw, HICR); + if ((hicr & E1000_HICR_EN) == 0) { + DEBUGOUT("E1000_HOST_EN bit disabled.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + /* check the previous command is completed */ + for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { + hicr = E1000_READ_REG(hw, HICR); + if (!(hicr & E1000_HICR_C)) + break; + msec_delay_irq(1); + } + + if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { + DEBUGOUT("Previous command timeout failed .\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + return E1000_SUCCESS; +} + +/***************************************************************************** + * This function writes the buffer content at the offset given on the host if. + * It also does alignment considerations to do the writes in most efficient way. + * Also fills up the sum of the buffer in *buffer parameter. + * + * returns - E1000_SUCCESS for success. + ****************************************************************************/ +int32_t +e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer, + uint16_t length, uint16_t offset, uint8_t *sum) +{ + uint8_t *tmp; + uint8_t *bufptr = buffer; + uint32_t data; + uint16_t remaining, i, j, prev_bytes; + + /* sum = only sum of the data and it is not checksum */ + + if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) { + return -E1000_ERR_PARAM; + } + + tmp = (uint8_t *)&data; + prev_bytes = offset & 0x3; + offset &= 0xFFFC; + offset >>= 2; + + if (prev_bytes) { + data = E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset); + for (j = prev_bytes; j < sizeof(uint32_t); j++) { + *(tmp + j) = *bufptr++; + *sum += *(tmp + j); + } + E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset, data); + length -= j - prev_bytes; + offset++; + } + + remaining = length & 0x3; + length -= remaining; + + /* Calculate length in DWORDs */ + length >>= 2; + + /* The device driver writes the relevant command block into the + * ram area. */ + for (i = 0; i < length; i++) { + for (j = 0; j < sizeof(uint32_t); j++) { + *(tmp + j) = *bufptr++; + *sum += *(tmp + j); + } + + E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data); + } + if (remaining) { + for (j = 0; j < sizeof(uint32_t); j++) { + if (j < remaining) + *(tmp + j) = *bufptr++; + else + *(tmp + j) = 0; + + *sum += *(tmp + j); + } + E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data); + } + + return E1000_SUCCESS; +} + + +/***************************************************************************** + * This function writes the command header after does the checksum calculation. + * + * returns - E1000_SUCCESS for success. + ****************************************************************************/ +int32_t +e1000_mng_write_cmd_header(struct e1000_hw * hw, + struct e1000_host_mng_command_header * hdr) +{ + uint16_t i; + uint8_t sum; + uint8_t *buffer; + + /* Write the whole command header structure which includes sum of + * the buffer */ + + uint16_t length = sizeof(struct e1000_host_mng_command_header); + + sum = hdr->checksum; + hdr->checksum = 0; + + buffer = (uint8_t *) hdr; + i = length; + while(i--) + sum += buffer[i]; + + hdr->checksum = 0 - sum; + + length >>= 2; + /* The device driver writes the relevant command block into the ram area. */ + for (i = 0; i < length; i++) + E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((uint32_t *) hdr + i)); + + return E1000_SUCCESS; +} + + +/***************************************************************************** + * This function indicates to ARC that a new command is pending which completes + * one write operation by the driver. + * + * returns - E1000_SUCCESS for success. + ****************************************************************************/ +int32_t +e1000_mng_write_commit( + struct e1000_hw * hw) +{ + uint32_t hicr; + + hicr = E1000_READ_REG(hw, HICR); + /* Setting this bit tells the ARC that a new command is pending. */ + E1000_WRITE_REG(hw, HICR, hicr | E1000_HICR_C); + + return E1000_SUCCESS; +} + + +/***************************************************************************** + * This function checks the mode of the firmware. + * + * returns - TRUE when the mode is IAMT or FALSE. + ****************************************************************************/ +boolean_t +e1000_check_mng_mode( + struct e1000_hw *hw) +{ + uint32_t fwsm; + + fwsm = E1000_READ_REG(hw, FWSM); + + if((fwsm & E1000_FWSM_MODE_MASK) == + (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)) + return TRUE; + + return FALSE; +} + + +/***************************************************************************** + * This function writes the dhcp info . + ****************************************************************************/ +int32_t +e1000_mng_write_dhcp_info(struct e1000_hw * hw, uint8_t *buffer, + uint16_t length) +{ + int32_t ret_val; + struct e1000_host_mng_command_header hdr; + + hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; + hdr.command_length = length; + hdr.reserved1 = 0; + hdr.reserved2 = 0; + hdr.checksum = 0; + + ret_val = e1000_mng_enable_host_if(hw); + if (ret_val == E1000_SUCCESS) { + ret_val = e1000_mng_host_if_write(hw, buffer, length, sizeof(hdr), + &(hdr.checksum)); + if (ret_val == E1000_SUCCESS) { + ret_val = e1000_mng_write_cmd_header(hw, &hdr); + if (ret_val == E1000_SUCCESS) + ret_val = e1000_mng_write_commit(hw); + } + } + return ret_val; +} + + +/***************************************************************************** + * This function calculates the checksum. + * + * returns - checksum of buffer contents. + ****************************************************************************/ +uint8_t +e1000_calculate_mng_checksum(char *buffer, uint32_t length) +{ + uint8_t sum = 0; + uint32_t i; + + if (!buffer) + return 0; + + for (i=0; i < length; i++) + sum += buffer[i]; + + return (uint8_t) (0 - sum); +} + +/***************************************************************************** + * This function checks whether tx pkt filtering needs to be enabled or not. + * + * returns - TRUE for packet filtering or FALSE. + ****************************************************************************/ +boolean_t +e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) +{ + /* called in init as well as watchdog timer functions */ + + int32_t ret_val, checksum; + boolean_t tx_filter = FALSE; + struct e1000_host_mng_dhcp_cookie *hdr = &(hw->mng_cookie); + uint8_t *buffer = (uint8_t *) &(hw->mng_cookie); + + if (e1000_check_mng_mode(hw)) { + ret_val = e1000_mng_enable_host_if(hw); + if (ret_val == E1000_SUCCESS) { + ret_val = e1000_host_if_read_cookie(hw, buffer); + if (ret_val == E1000_SUCCESS) { + checksum = hdr->checksum; + hdr->checksum = 0; + if ((hdr->signature == E1000_IAMT_SIGNATURE) && + checksum == e1000_calculate_mng_checksum((char *)buffer, + E1000_MNG_DHCP_COOKIE_LENGTH)) { + if (hdr->status & + E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT) + tx_filter = TRUE; + } else + tx_filter = TRUE; + } else + tx_filter = TRUE; + } + } + + hw->tx_pkt_filtering = tx_filter; + return tx_filter; +} + +/****************************************************************************** + * Verifies the hardware needs to allow ARPs to be processed by the host + * + * hw - Struct containing variables accessed by shared code + * + * returns: - TRUE/FALSE + * + *****************************************************************************/ +uint32_t +e1000_enable_mng_pass_thru(struct e1000_hw *hw) +{ + uint32_t manc; + uint32_t fwsm, factps; + + if (hw->asf_firmware_present) { + manc = E1000_READ_REG(hw, MANC); + + if (!(manc & E1000_MANC_RCV_TCO_EN) || + !(manc & E1000_MANC_EN_MAC_ADDR_FILTER)) + return FALSE; + if (e1000_arc_subsystem_valid(hw) == TRUE) { + fwsm = E1000_READ_REG(hw, FWSM); + factps = E1000_READ_REG(hw, FACTPS); + + if (((fwsm & E1000_FWSM_MODE_MASK) == + (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT)) && + (factps & E1000_FACTPS_MNGCG)) + return TRUE; + } else + if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN)) + return TRUE; + } + return FALSE; +} + static int32_t e1000_polarity_reversal_workaround(struct e1000_hw *hw) { @@ -5403,3 +6348,265 @@ e1000_polarity_reversal_workaround(struct e1000_hw *hw) return E1000_SUCCESS; } +/*************************************************************************** + * + * Disables PCI-Express master access. + * + * hw: Struct containing variables accessed by shared code + * + * returns: - none. + * + ***************************************************************************/ +void +e1000_set_pci_express_master_disable(struct e1000_hw *hw) +{ + uint32_t ctrl; + + DEBUGFUNC("e1000_set_pci_express_master_disable"); + + if (hw->bus_type != e1000_bus_type_pci_express) + return; + + ctrl = E1000_READ_REG(hw, CTRL); + ctrl |= E1000_CTRL_GIO_MASTER_DISABLE; + E1000_WRITE_REG(hw, CTRL, ctrl); +} + +/*************************************************************************** + * + * Enables PCI-Express master access. + * + * hw: Struct containing variables accessed by shared code + * + * returns: - none. + * + ***************************************************************************/ +void +e1000_enable_pciex_master(struct e1000_hw *hw) +{ + uint32_t ctrl; + + DEBUGFUNC("e1000_enable_pciex_master"); + + if (hw->bus_type != e1000_bus_type_pci_express) + return; + + ctrl = E1000_READ_REG(hw, CTRL); + ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE; + E1000_WRITE_REG(hw, CTRL, ctrl); +} + +/******************************************************************************* + * + * Disables PCI-Express master access and verifies there are no pending requests + * + * hw: Struct containing variables accessed by shared code + * + * returns: - E1000_ERR_MASTER_REQUESTS_PENDING if master disable bit hasn't + * caused the master requests to be disabled. + * E1000_SUCCESS master requests disabled. + * + ******************************************************************************/ +int32_t +e1000_disable_pciex_master(struct e1000_hw *hw) +{ + int32_t timeout = MASTER_DISABLE_TIMEOUT; /* 80ms */ + + DEBUGFUNC("e1000_disable_pciex_master"); + + if (hw->bus_type != e1000_bus_type_pci_express) + return E1000_SUCCESS; + + e1000_set_pci_express_master_disable(hw); + + while(timeout) { + if(!(E1000_READ_REG(hw, STATUS) & E1000_STATUS_GIO_MASTER_ENABLE)) + break; + else + udelay(100); + timeout--; + } + + if(!timeout) { + DEBUGOUT("Master requests are pending.\n"); + return -E1000_ERR_MASTER_REQUESTS_PENDING; + } + + return E1000_SUCCESS; +} + +/******************************************************************************* + * + * Check for EEPROM Auto Read bit done. + * + * hw: Struct containing variables accessed by shared code + * + * returns: - E1000_ERR_RESET if fail to reset MAC + * E1000_SUCCESS at any other case. + * + ******************************************************************************/ +int32_t +e1000_get_auto_rd_done(struct e1000_hw *hw) +{ + int32_t timeout = AUTO_READ_DONE_TIMEOUT; + + DEBUGFUNC("e1000_get_auto_rd_done"); + + switch (hw->mac_type) { + default: + msec_delay(5); + break; + case e1000_82573: + while(timeout) { + if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break; + else msec_delay(1); + timeout--; + } + + if(!timeout) { + DEBUGOUT("Auto read by HW from EEPROM has not completed.\n"); + return -E1000_ERR_RESET; + } + break; + } + + return E1000_SUCCESS; +} + +/*************************************************************************** + * Checks if the PHY configuration is done + * + * hw: Struct containing variables accessed by shared code + * + * returns: - E1000_ERR_RESET if fail to reset MAC + * E1000_SUCCESS at any other case. + * + ***************************************************************************/ +int32_t +e1000_get_phy_cfg_done(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_get_phy_cfg_done"); + + /* Simply wait for 10ms */ + msec_delay(10); + + return E1000_SUCCESS; +} + +/*************************************************************************** + * + * Using the combination of SMBI and SWESMBI semaphore bits when resetting + * adapter or Eeprom access. + * + * hw: Struct containing variables accessed by shared code + * + * returns: - E1000_ERR_EEPROM if fail to access EEPROM. + * E1000_SUCCESS at any other case. + * + ***************************************************************************/ +int32_t +e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) +{ + int32_t timeout; + uint32_t swsm; + + DEBUGFUNC("e1000_get_hw_eeprom_semaphore"); + + if(!hw->eeprom_semaphore_present) + return E1000_SUCCESS; + + + /* Get the FW semaphore. */ + timeout = hw->eeprom.word_size + 1; + while(timeout) { + swsm = E1000_READ_REG(hw, SWSM); + swsm |= E1000_SWSM_SWESMBI; + E1000_WRITE_REG(hw, SWSM, swsm); + /* if we managed to set the bit we got the semaphore. */ + swsm = E1000_READ_REG(hw, SWSM); + if(swsm & E1000_SWSM_SWESMBI) + break; + + udelay(50); + timeout--; + } + + if(!timeout) { + /* Release semaphores */ + e1000_put_hw_eeprom_semaphore(hw); + DEBUGOUT("Driver can't access the Eeprom - SWESMBI bit is set.\n"); + return -E1000_ERR_EEPROM; + } + + return E1000_SUCCESS; +} + +/*************************************************************************** + * This function clears HW semaphore bits. + * + * hw: Struct containing variables accessed by shared code + * + * returns: - None. + * + ***************************************************************************/ +void +e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) +{ + uint32_t swsm; + + DEBUGFUNC("e1000_put_hw_eeprom_semaphore"); + + if(!hw->eeprom_semaphore_present) + return; + + swsm = E1000_READ_REG(hw, SWSM); + /* Release both semaphores. */ + swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); + E1000_WRITE_REG(hw, SWSM, swsm); +} + +/****************************************************************************** + * Checks if PHY reset is blocked due to SOL/IDER session, for example. + * Returning E1000_BLK_PHY_RESET isn't necessarily an error. But it's up to + * the caller to figure out how to deal with it. + * + * hw - Struct containing variables accessed by shared code + * + * returns: - E1000_BLK_PHY_RESET + * E1000_SUCCESS + * + *****************************************************************************/ +int32_t +e1000_check_phy_reset_block(struct e1000_hw *hw) +{ + uint32_t manc = 0; + if(hw->mac_type > e1000_82547_rev_2) + manc = E1000_READ_REG(hw, MANC); + return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? + E1000_BLK_PHY_RESET : E1000_SUCCESS; +} + +uint8_t +e1000_arc_subsystem_valid(struct e1000_hw *hw) +{ + uint32_t fwsm; + + /* On 8257x silicon, registers in the range of 0x8800 - 0x8FFC + * may not be provided a DMA clock when no manageability features are + * enabled. We do not want to perform any reads/writes to these registers + * if this is the case. We read FWSM to determine the manageability mode. + */ + switch (hw->mac_type) { + case e1000_82573: + fwsm = E1000_READ_REG(hw, FWSM); + if((fwsm & E1000_FWSM_MODE_MASK) != 0) + return TRUE; + break; + default: + break; + } + return FALSE; +} + + + diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index f397e637a3c..a0263ee96c6 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -57,6 +57,7 @@ typedef enum { e1000_82541_rev_2, e1000_82547, e1000_82547_rev_2, + e1000_82573, e1000_num_macs } e1000_mac_type; @@ -64,6 +65,7 @@ typedef enum { e1000_eeprom_uninitialized = 0, e1000_eeprom_spi, e1000_eeprom_microwire, + e1000_eeprom_flash, e1000_num_eeprom_types } e1000_eeprom_type; @@ -96,6 +98,7 @@ typedef enum { e1000_bus_type_unknown = 0, e1000_bus_type_pci, e1000_bus_type_pcix, + e1000_bus_type_pci_express, e1000_bus_type_reserved } e1000_bus_type; @@ -107,6 +110,7 @@ typedef enum { e1000_bus_speed_100, e1000_bus_speed_120, e1000_bus_speed_133, + e1000_bus_speed_2500, e1000_bus_speed_reserved } e1000_bus_speed; @@ -115,6 +119,8 @@ typedef enum { e1000_bus_width_unknown = 0, e1000_bus_width_32, e1000_bus_width_64, + e1000_bus_width_pciex_1, + e1000_bus_width_pciex_4, e1000_bus_width_reserved } e1000_bus_width; @@ -196,6 +202,7 @@ typedef enum { typedef enum { e1000_phy_m88 = 0, e1000_phy_igp, + e1000_phy_igp_2, e1000_phy_undefined = 0xFF } e1000_phy_type; @@ -242,8 +249,19 @@ struct e1000_eeprom_info { uint16_t address_bits; uint16_t delay_usec; uint16_t page_size; + boolean_t use_eerd; + boolean_t use_eewr; }; +/* Flex ASF Information */ +#define E1000_HOST_IF_MAX_SIZE 2048 + +typedef enum { + e1000_byte_align = 0, + e1000_word_align = 1, + e1000_dword_align = 2 +} e1000_align_type; + /* Error Codes */ @@ -254,11 +272,16 @@ struct e1000_eeprom_info { #define E1000_ERR_PARAM 4 #define E1000_ERR_MAC_TYPE 5 #define E1000_ERR_PHY_TYPE 6 +#define E1000_ERR_RESET 9 +#define E1000_ERR_MASTER_REQUESTS_PENDING 10 +#define E1000_ERR_HOST_INTERFACE_COMMAND 11 +#define E1000_BLK_PHY_RESET 12 /* Function prototypes */ /* Initialization */ int32_t e1000_reset_hw(struct e1000_hw *hw); int32_t e1000_init_hw(struct e1000_hw *hw); +int32_t e1000_id_led_init(struct e1000_hw * hw); int32_t e1000_set_mac_type(struct e1000_hw *hw); void e1000_set_media_type(struct e1000_hw *hw); @@ -275,7 +298,7 @@ int32_t e1000_force_mac_fc(struct e1000_hw *hw); /* PHY */ int32_t e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy_data); int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data); -void e1000_phy_hw_reset(struct e1000_hw *hw); +int32_t e1000_phy_hw_reset(struct e1000_hw *hw); int32_t e1000_phy_reset(struct e1000_hw *hw); int32_t e1000_detect_gig_phy(struct e1000_hw *hw); int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); @@ -287,13 +310,86 @@ int32_t e1000_check_downshift(struct e1000_hw *hw); int32_t e1000_validate_mdi_setting(struct e1000_hw *hw); /* EEPROM Functions */ -void e1000_init_eeprom_params(struct e1000_hw *hw); +int32_t e1000_init_eeprom_params(struct e1000_hw *hw); +boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); +int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +int32_t e1000_write_eeprom_eewr(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd); + +/* MNG HOST IF functions */ +uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw); + +#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 +#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */ + +#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */ +#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */ +#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */ +#define E1000_MNG_IAMT_MODE 0x3 +#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */ + +#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */ +#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */ +#define E1000_VFTA_ENTRY_SHIFT 0x5 +#define E1000_VFTA_ENTRY_MASK 0x7F +#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F + +struct e1000_host_mng_command_header { + uint8_t command_id; + uint8_t checksum; + uint16_t reserved1; + uint16_t reserved2; + uint16_t command_length; +}; + +struct e1000_host_mng_command_info { + struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ + uint8_t command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658*/ +}; +#ifdef __BIG_ENDIAN +struct e1000_host_mng_dhcp_cookie{ + uint32_t signature; + uint16_t vlan_id; + uint8_t reserved0; + uint8_t status; + uint32_t reserved1; + uint8_t checksum; + uint8_t reserved3; + uint16_t reserved2; +}; +#else +struct e1000_host_mng_dhcp_cookie{ + uint32_t signature; + uint8_t status; + uint8_t reserved0; + uint16_t vlan_id; + uint32_t reserved1; + uint16_t reserved2; + uint8_t reserved3; + uint8_t checksum; +}; +#endif + +int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer, + uint16_t length); +boolean_t e1000_check_mng_mode(struct e1000_hw *hw); +boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); +int32_t e1000_mng_enable_host_if(struct e1000_hw *hw); +int32_t e1000_mng_host_if_write(struct e1000_hw *hw, uint8_t *buffer, + uint16_t length, uint16_t offset, uint8_t *sum); +int32_t e1000_mng_write_cmd_header(struct e1000_hw* hw, + struct e1000_host_mng_command_header* hdr); + +int32_t e1000_mng_write_commit(struct e1000_hw *hw); + int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data); int32_t e1000_validate_eeprom_checksum(struct e1000_hw *hw); int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw); int32_t e1000_write_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data); int32_t e1000_read_part_num(struct e1000_hw *hw, uint32_t * part_num); int32_t e1000_read_mac_addr(struct e1000_hw * hw); +int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); +void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask); /* Filters (multicast, vlan, receive) */ void e1000_init_rx_addrs(struct e1000_hw *hw); @@ -313,7 +409,6 @@ int32_t e1000_led_off(struct e1000_hw *hw); /* Adaptive IFS Functions */ /* Everything else */ -uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw); void e1000_clear_hw_cntrs(struct e1000_hw *hw); void e1000_reset_adaptive(struct e1000_hw *hw); void e1000_update_adaptive(struct e1000_hw *hw); @@ -330,6 +425,19 @@ void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value); void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value); int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, boolean_t link_up); int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); +int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active); +void e1000_set_pci_express_master_disable(struct e1000_hw *hw); +void e1000_enable_pciex_master(struct e1000_hw *hw); +int32_t e1000_disable_pciex_master(struct e1000_hw *hw); +int32_t e1000_get_auto_rd_done(struct e1000_hw *hw); +int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw); +int32_t e1000_get_software_semaphore(struct e1000_hw *hw); +void e1000_release_software_semaphore(struct e1000_hw *hw); +int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); +int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); +void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); +int32_t e1000_commit_shadow_ram(struct e1000_hw *hw); +uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw); #define E1000_READ_REG_IO(a, reg) \ e1000_read_reg_io((a), E1000_##reg) @@ -369,6 +477,10 @@ int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); #define E1000_DEV_ID_82546GB_SERDES 0x107B #define E1000_DEV_ID_82546GB_PCIE 0x108A #define E1000_DEV_ID_82547EI 0x1019 +#define E1000_DEV_ID_82573E 0x108B +#define E1000_DEV_ID_82573E_IAMT 0x108C + +#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099 #define NODE_ADDRESS_SIZE 6 #define ETH_LENGTH_OF_ADDRESS 6 @@ -381,6 +493,7 @@ int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); #define E1000_REVISION_0 0 #define E1000_REVISION_1 1 #define E1000_REVISION_2 2 +#define E1000_REVISION_3 3 #define SPEED_10 10 #define SPEED_100 100 @@ -437,6 +550,7 @@ int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); E1000_IMS_RXSEQ | \ E1000_IMS_LSC) + /* Number of high/low register pairs in the RAR. The RAR (Receive Address * Registers) holds the directed and multicast addresses that we monitor. We * reserve one of these spots for our directed address, allowing us room for @@ -457,14 +571,74 @@ struct e1000_rx_desc { uint16_t special; }; +/* Receive Descriptor - Extended */ +union e1000_rx_desc_extended { + struct { + uint64_t buffer_addr; + uint64_t reserved; + } read; + struct { + struct { + uint32_t mrq; /* Multiple Rx Queues */ + union { + uint32_t rss; /* RSS Hash */ + struct { + uint16_t ip_id; /* IP id */ + uint16_t csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + uint32_t status_error; /* ext status/error */ + uint16_t length; + uint16_t vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +#define MAX_PS_BUFFERS 4 +/* Receive Descriptor - Packet Split */ +union e1000_rx_desc_packet_split { + struct { + /* one buffer for protocol header(s), three data buffers */ + uint64_t buffer_addr[MAX_PS_BUFFERS]; + } read; + struct { + struct { + uint32_t mrq; /* Multiple Rx Queues */ + union { + uint32_t rss; /* RSS Hash */ + struct { + uint16_t ip_id; /* IP id */ + uint16_t csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + uint32_t status_error; /* ext status/error */ + uint16_t length0; /* length of buffer 0 */ + uint16_t vlan; /* VLAN tag */ + } middle; + struct { + uint16_t header_status; + uint16_t length[3]; /* length of buffers 1-3 */ + } upper; + uint64_t reserved; + } wb; /* writeback */ +}; + /* Receive Decriptor bit definitions */ #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ #define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ #define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ #define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */ #define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ #define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ #define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ +#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */ +#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ +#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ #define E1000_RXD_ERR_CE 0x01 /* CRC Error */ #define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ #define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ @@ -474,9 +648,20 @@ struct e1000_rx_desc { #define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ #define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ #define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ -#define E1000_RXD_SPC_PRI_SHIFT 0x000D /* Priority is in upper 3 of 16 */ +#define E1000_RXD_SPC_PRI_SHIFT 13 #define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */ -#define E1000_RXD_SPC_CFI_SHIFT 0x000C /* CFI is bit 12 */ +#define E1000_RXD_SPC_CFI_SHIFT 12 + +#define E1000_RXDEXT_STATERR_CE 0x01000000 +#define E1000_RXDEXT_STATERR_SE 0x02000000 +#define E1000_RXDEXT_STATERR_SEQ 0x04000000 +#define E1000_RXDEXT_STATERR_CXE 0x10000000 +#define E1000_RXDEXT_STATERR_TCPE 0x20000000 +#define E1000_RXDEXT_STATERR_IPE 0x40000000 +#define E1000_RXDEXT_STATERR_RXE 0x80000000 + +#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000 +#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF /* mask to determine if packets should be dropped due to frame errors */ #define E1000_RXD_ERR_FRAME_ERR_MASK ( \ @@ -486,6 +671,15 @@ struct e1000_rx_desc { E1000_RXD_ERR_CXE | \ E1000_RXD_ERR_RXE) + +/* Same mask, but for extended and packet split descriptors */ +#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ + E1000_RXDEXT_STATERR_CE | \ + E1000_RXDEXT_STATERR_SE | \ + E1000_RXDEXT_STATERR_SEQ | \ + E1000_RXDEXT_STATERR_CXE | \ + E1000_RXDEXT_STATERR_RXE) + /* Transmit Descriptor */ struct e1000_tx_desc { uint64_t buffer_addr; /* Address of the descriptor's data buffer */ @@ -667,6 +861,7 @@ struct e1000_ffvt_entry { #define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ #define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ #define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ +#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ #define E1000_RCTL 0x00100 /* RX Control - RW */ #define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ #define E1000_TXCW 0x00178 /* TX Configuration Word - RW */ @@ -676,9 +871,23 @@ struct e1000_ffvt_entry { #define E1000_TBT 0x00448 /* TX Burst Timer - RW */ #define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ #define E1000_LEDCTL 0x00E00 /* LED Control - RW */ +#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ +#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ +#define E1000_PBS 0x01008 /* Packet Buffer Size */ +#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ +#define E1000_FLASH_UPDATES 1000 +#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ +#define E1000_FLASHT 0x01028 /* FLASH Timer Register */ +#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ +#define E1000_FLSWCTL 0x01030 /* FLASH control register */ +#define E1000_FLSWDATA 0x01034 /* FLASH data register */ +#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */ +#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ +#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ #define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ #define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ +#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ #define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */ #define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */ #define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */ @@ -688,6 +897,7 @@ struct e1000_ffvt_entry { #define E1000_RXDCTL 0x02828 /* RX Descriptor Control - RW */ #define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */ #define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */ +#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ #define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */ #define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */ #define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */ @@ -703,6 +913,14 @@ struct e1000_ffvt_entry { #define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */ #define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */ #define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */ +#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */ +#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */ +#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */ +#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */ +#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */ +#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */ +#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */ +#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */ #define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ #define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ #define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ @@ -761,7 +979,17 @@ struct e1000_ffvt_entry { #define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */ #define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */ #define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */ +#define E1000_IAC 0x4100 /* Interrupt Assertion Count */ +#define E1000_ICRXPTC 0x4104 /* Interrupt Cause Rx Packet Timer Expire Count */ +#define E1000_ICRXATC 0x4108 /* Interrupt Cause Rx Absolute Timer Expire Count */ +#define E1000_ICTXPTC 0x410C /* Interrupt Cause Tx Packet Timer Expire Count */ +#define E1000_ICTXATC 0x4110 /* Interrupt Cause Tx Absolute Timer Expire Count */ +#define E1000_ICTXQEC 0x4118 /* Interrupt Cause Tx Queue Empty Count */ +#define E1000_ICTXQMTC 0x411C /* Interrupt Cause Tx Queue Minimum Threshold Count */ +#define E1000_ICRXDMTC 0x4120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */ +#define E1000_ICRXOC 0x4124 /* Interrupt Cause Receiver Overrun Count */ #define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */ +#define E1000_RFCTL 0x05008 /* Receive Filter Control*/ #define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ #define E1000_RA 0x05400 /* Receive Address - RW Array */ #define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ @@ -779,6 +1007,16 @@ struct e1000_ffvt_entry { #define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */ #define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */ +#define E1000_GCR 0x05B00 /* PCI-Ex Control */ +#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */ +#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */ +#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */ +#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */ +#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ +#define E1000_SWSM 0x05B50 /* SW Semaphore */ +#define E1000_FWSM 0x05B54 /* FW Semaphore */ +#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ +#define E1000_HICR 0x08F00 /* Host Inteface Control */ /* Register Set (82542) * * Some of the 82542 registers are located at different offsets than they are @@ -829,6 +1067,18 @@ struct e1000_ffvt_entry { #define E1000_82542_VFTA 0x00600 #define E1000_82542_LEDCTL E1000_LEDCTL #define E1000_82542_PBA E1000_PBA +#define E1000_82542_PBS E1000_PBS +#define E1000_82542_EEMNGCTL E1000_EEMNGCTL +#define E1000_82542_EEARBC E1000_EEARBC +#define E1000_82542_FLASHT E1000_FLASHT +#define E1000_82542_EEWR E1000_EEWR +#define E1000_82542_FLSWCTL E1000_FLSWCTL +#define E1000_82542_FLSWDATA E1000_FLSWDATA +#define E1000_82542_FLSWCNT E1000_FLSWCNT +#define E1000_82542_FLOP E1000_FLOP +#define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL +#define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE +#define E1000_82542_ERT E1000_ERT #define E1000_82542_RXDCTL E1000_RXDCTL #define E1000_82542_RADV E1000_RADV #define E1000_82542_RSRPD E1000_RSRPD @@ -913,6 +1163,38 @@ struct e1000_ffvt_entry { #define E1000_82542_FFMT E1000_FFMT #define E1000_82542_FFVT E1000_FFVT #define E1000_82542_HOST_IF E1000_HOST_IF +#define E1000_82542_IAM E1000_IAM +#define E1000_82542_EEMNGCTL E1000_EEMNGCTL +#define E1000_82542_PSRCTL E1000_PSRCTL +#define E1000_82542_RAID E1000_RAID +#define E1000_82542_TARC0 E1000_TARC0 +#define E1000_82542_TDBAL1 E1000_TDBAL1 +#define E1000_82542_TDBAH1 E1000_TDBAH1 +#define E1000_82542_TDLEN1 E1000_TDLEN1 +#define E1000_82542_TDH1 E1000_TDH1 +#define E1000_82542_TDT1 E1000_TDT1 +#define E1000_82542_TXDCTL1 E1000_TXDCTL1 +#define E1000_82542_TARC1 E1000_TARC1 +#define E1000_82542_RFCTL E1000_RFCTL +#define E1000_82542_GCR E1000_GCR +#define E1000_82542_GSCL_1 E1000_GSCL_1 +#define E1000_82542_GSCL_2 E1000_GSCL_2 +#define E1000_82542_GSCL_3 E1000_GSCL_3 +#define E1000_82542_GSCL_4 E1000_GSCL_4 +#define E1000_82542_FACTPS E1000_FACTPS +#define E1000_82542_SWSM E1000_SWSM +#define E1000_82542_FWSM E1000_FWSM +#define E1000_82542_FFLT_DBG E1000_FFLT_DBG +#define E1000_82542_IAC E1000_IAC +#define E1000_82542_ICRXPTC E1000_ICRXPTC +#define E1000_82542_ICRXATC E1000_ICRXATC +#define E1000_82542_ICTXPTC E1000_ICTXPTC +#define E1000_82542_ICTXATC E1000_ICTXATC +#define E1000_82542_ICTXQEC E1000_ICTXQEC +#define E1000_82542_ICTXQMTC E1000_ICTXQMTC +#define E1000_82542_ICRXDMTC E1000_ICRXDMTC +#define E1000_82542_ICRXOC E1000_ICRXOC +#define E1000_82542_HICR E1000_HICR /* Statistics counters collected by the MAC */ struct e1000_hw_stats { @@ -974,11 +1256,21 @@ struct e1000_hw_stats { uint64_t bptc; uint64_t tsctc; uint64_t tsctfc; + uint64_t iac; + uint64_t icrxptc; + uint64_t icrxatc; + uint64_t ictxptc; + uint64_t ictxatc; + uint64_t ictxqec; + uint64_t ictxqmtc; + uint64_t icrxdmtc; + uint64_t icrxoc; }; /* Structure containing variables used by the shared code (e1000_hw.c) */ struct e1000_hw { - uint8_t __iomem *hw_addr; + uint8_t *hw_addr; + uint8_t *flash_address; e1000_mac_type mac_type; e1000_phy_type phy_type; uint32_t phy_init_script; @@ -993,6 +1285,7 @@ struct e1000_hw { e1000_ms_type original_master_slave; e1000_ffe_config ffe_config_state; uint32_t asf_firmware_present; + uint32_t eeprom_semaphore_present; unsigned long io_base; uint32_t phy_id; uint32_t phy_revision; @@ -1009,6 +1302,8 @@ struct e1000_hw { uint32_t ledctl_default; uint32_t ledctl_mode1; uint32_t ledctl_mode2; + boolean_t tx_pkt_filtering; + struct e1000_host_mng_dhcp_cookie mng_cookie; uint16_t phy_spd_default; uint16_t autoneg_advertised; uint16_t pci_cmd_word; @@ -1047,16 +1342,24 @@ struct e1000_hw { boolean_t adaptive_ifs; boolean_t ifs_params_forced; boolean_t in_ifs_mode; + boolean_t mng_reg_access_disabled; }; #define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */ #define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */ +#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */ +#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ +#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */ +#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ +#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */ +#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */ /* Register Bit Masks */ /* Device Control */ #define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ #define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */ #define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ +#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */ #define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ #define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */ #define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */ @@ -1070,6 +1373,7 @@ struct e1000_hw { #define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */ #define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ #define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ +#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */ #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ #define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ @@ -1089,6 +1393,7 @@ struct e1000_hw { #define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ #define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ #define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ +#define E1000_STATUS_FUNC_SHIFT 2 #define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */ #define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ #define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ @@ -1098,6 +1403,8 @@ struct e1000_hw { #define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ #define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ #define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */ +#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */ +#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ #define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */ #define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */ #define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */ @@ -1128,6 +1435,18 @@ struct e1000_hw { #ifndef E1000_EEPROM_GRANT_ATTEMPTS #define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */ #endif +#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */ +#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */ +#define E1000_EECD_SIZE_EX_SHIFT 11 +#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */ +#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */ +#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */ +#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ +#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */ +#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */ +#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ +#define E1000_STM_OPCODE 0xDB00 +#define E1000_HICR_FW_RESET 0xC0 /* EEPROM Read */ #define E1000_EERD_START 0x00000001 /* Start Read */ @@ -1171,6 +1490,8 @@ struct e1000_hw { #define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 #define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 #define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 +#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ +#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ /* MDI Control */ #define E1000_MDIC_DATA_MASK 0x0000FFFF @@ -1187,14 +1508,17 @@ struct e1000_hw { /* LED Control */ #define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F #define E1000_LEDCTL_LED0_MODE_SHIFT 0 +#define E1000_LEDCTL_LED0_BLINK_RATE 0x0000020 #define E1000_LEDCTL_LED0_IVRT 0x00000040 #define E1000_LEDCTL_LED0_BLINK 0x00000080 #define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00 #define E1000_LEDCTL_LED1_MODE_SHIFT 8 +#define E1000_LEDCTL_LED1_BLINK_RATE 0x0002000 #define E1000_LEDCTL_LED1_IVRT 0x00004000 #define E1000_LEDCTL_LED1_BLINK 0x00008000 #define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000 #define E1000_LEDCTL_LED2_MODE_SHIFT 16 +#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000 #define E1000_LEDCTL_LED2_IVRT 0x00400000 #define E1000_LEDCTL_LED2_BLINK 0x00800000 #define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000 @@ -1238,6 +1562,10 @@ struct e1000_hw { #define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ #define E1000_ICR_TXD_LOW 0x00008000 #define E1000_ICR_SRPD 0x00010000 +#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */ +#define E1000_ICR_MNG 0x00040000 /* Manageability event */ +#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */ +#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */ /* Interrupt Cause Set */ #define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -1255,6 +1583,9 @@ struct e1000_hw { #define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ #define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW #define E1000_ICS_SRPD E1000_ICR_SRPD +#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */ /* Interrupt Mask Set */ #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -1272,6 +1603,9 @@ struct e1000_hw { #define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ #define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW #define E1000_IMS_SRPD E1000_ICR_SRPD +#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */ /* Interrupt Mask Clear */ #define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -1289,6 +1623,9 @@ struct e1000_hw { #define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ #define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW #define E1000_IMC_SRPD E1000_ICR_SRPD +#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */ /* Receive Control */ #define E1000_RCTL_RST 0x00000001 /* Software reset */ @@ -1301,6 +1638,8 @@ struct e1000_hw { #define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ #define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */ #define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ +#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */ +#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ #define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */ #define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */ #define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */ @@ -1327,6 +1666,34 @@ struct e1000_hw { #define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ #define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ #define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ +#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */ +#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */ + +/* Use byte values for the following shift parameters + * Usage: + * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) & + * E1000_PSRCTL_BSIZE0_MASK) | + * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) & + * E1000_PSRCTL_BSIZE1_MASK) | + * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) & + * E1000_PSRCTL_BSIZE2_MASK) | + * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |; + * E1000_PSRCTL_BSIZE3_MASK)) + * where value0 = [128..16256], default=256 + * value1 = [1024..64512], default=4096 + * value2 = [0..64512], default=4096 + * value3 = [0..64512], default=0 + */ + +#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F +#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00 +#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000 +#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000 + +#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ +#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ +#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ +#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ /* Receive Descriptor */ #define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */ @@ -1341,6 +1708,23 @@ struct e1000_hw { #define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ #define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ +/* Header split receive */ +#define E1000_RFCTL_ISCSI_DIS 0x00000001 +#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E +#define E1000_RFCTL_ISCSI_DWC_SHIFT 1 +#define E1000_RFCTL_NFSW_DIS 0x00000040 +#define E1000_RFCTL_NFSR_DIS 0x00000080 +#define E1000_RFCTL_NFS_VER_MASK 0x00000300 +#define E1000_RFCTL_NFS_VER_SHIFT 8 +#define E1000_RFCTL_IPV6_DIS 0x00000400 +#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800 +#define E1000_RFCTL_ACK_DIS 0x00001000 +#define E1000_RFCTL_ACKD_DIS 0x00002000 +#define E1000_RFCTL_IPFRSP_DIS 0x00004000 +#define E1000_RFCTL_EXTEN 0x00008000 +#define E1000_RFCTL_IPV6_EX_DIS 0x00010000 +#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 + /* Receive Descriptor Control */ #define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */ #define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */ @@ -1354,6 +1738,8 @@ struct e1000_hw { #define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ #define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */ #define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ +#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc. + still to be processed. */ /* Transmit Configuration Word */ #define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ @@ -1387,12 +1773,16 @@ struct e1000_hw { #define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */ #define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ #define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */ +#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ /* Receive Checksum Control */ #define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */ #define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ #define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ #define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */ +#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ +#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ + /* Definitions for power management and wakeup registers */ /* Wake Up Control */ @@ -1411,6 +1801,7 @@ struct e1000_hw { #define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ #define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ #define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ +#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */ #define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ #define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ #define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ @@ -1446,13 +1837,19 @@ struct e1000_hw { #define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ #define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery * Filtering */ +#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */ #define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */ #define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ #define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */ +#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ #define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address * filtering */ #define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host * memory */ +#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address + * filtering */ +#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */ +#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */ #define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */ #define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */ #define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */ @@ -1463,11 +1860,97 @@ struct e1000_hw { #define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */ #define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */ +/* SW Semaphore Register */ +#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ +#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ +#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */ +#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ + +/* FW Semaphore Register */ +#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */ +#define E1000_FWSM_MODE_SHIFT 1 +#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */ + +/* FFLT Debug Register */ +#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */ + +typedef enum { + e1000_mng_mode_none = 0, + e1000_mng_mode_asf, + e1000_mng_mode_pt, + e1000_mng_mode_ipmi, + e1000_mng_mode_host_interface_only +} e1000_mng_mode; + +/* Host Inteface Control Register */ +#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */ +#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done + * to put command in RAM */ +#define E1000_HICR_SV 0x00000004 /* Status Validity */ +#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */ + +/* Host Interface Command Interface - Address range 0x8800-0x8EFF */ +#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */ +#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */ +#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */ +#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */ + +struct e1000_host_command_header { + uint8_t command_id; + uint8_t command_length; + uint8_t command_options; /* I/F bits for command, status for return */ + uint8_t checksum; +}; +struct e1000_host_command_info { + struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ + uint8_t command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */ +}; + +/* Host SMB register #0 */ +#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */ +#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */ +#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */ +#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */ + +/* Host SMB register #1 */ +#define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN +#define E1000_HSMC1R_DATAIN E1000_HSMC0R_DATAIN +#define E1000_HSMC1R_DATAOUT E1000_HSMC0R_DATAOUT +#define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT + +/* FW Status Register */ +#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */ + /* Wake Up Packet Length */ #define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */ #define E1000_MDALIGN 4096 +#define E1000_GCR_BEM32 0x00400000 +/* Function Active and Power State to MNG */ +#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003 +#define E1000_FACTPS_LAN0_VALID 0x00000004 +#define E1000_FACTPS_FUNC0_AUX_EN 0x00000008 +#define E1000_FACTPS_FUNC1_POWER_STATE_MASK 0x000000C0 +#define E1000_FACTPS_FUNC1_POWER_STATE_SHIFT 6 +#define E1000_FACTPS_LAN1_VALID 0x00000100 +#define E1000_FACTPS_FUNC1_AUX_EN 0x00000200 +#define E1000_FACTPS_FUNC2_POWER_STATE_MASK 0x00003000 +#define E1000_FACTPS_FUNC2_POWER_STATE_SHIFT 12 +#define E1000_FACTPS_IDE_ENABLE 0x00004000 +#define E1000_FACTPS_FUNC2_AUX_EN 0x00008000 +#define E1000_FACTPS_FUNC3_POWER_STATE_MASK 0x000C0000 +#define E1000_FACTPS_FUNC3_POWER_STATE_SHIFT 18 +#define E1000_FACTPS_SP_ENABLE 0x00100000 +#define E1000_FACTPS_FUNC3_AUX_EN 0x00200000 +#define E1000_FACTPS_FUNC4_POWER_STATE_MASK 0x03000000 +#define E1000_FACTPS_FUNC4_POWER_STATE_SHIFT 24 +#define E1000_FACTPS_IPMI_ENABLE 0x04000000 +#define E1000_FACTPS_FUNC4_AUX_EN 0x08000000 +#define E1000_FACTPS_MNGCG 0x20000000 +#define E1000_FACTPS_LAN_FUNC_SEL 0x40000000 +#define E1000_FACTPS_PM_STATE_CHANGED 0x80000000 + /* EEPROM Commands - Microwire */ #define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */ #define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */ @@ -1477,22 +1960,20 @@ struct e1000_hw { /* EEPROM Commands - SPI */ #define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ -#define EEPROM_READ_OPCODE_SPI 0x3 /* EEPROM read opcode */ -#define EEPROM_WRITE_OPCODE_SPI 0x2 /* EEPROM write opcode */ -#define EEPROM_A8_OPCODE_SPI 0x8 /* opcode bit-3 = address bit-8 */ -#define EEPROM_WREN_OPCODE_SPI 0x6 /* EEPROM set Write Enable latch */ -#define EEPROM_WRDI_OPCODE_SPI 0x4 /* EEPROM reset Write Enable latch */ -#define EEPROM_RDSR_OPCODE_SPI 0x5 /* EEPROM read Status register */ -#define EEPROM_WRSR_OPCODE_SPI 0x1 /* EEPROM write Status register */ +#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */ +#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */ +#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ +#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */ +#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */ +#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */ +#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */ +#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */ +#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */ +#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */ /* EEPROM Size definitions */ -#define EEPROM_SIZE_16KB 0x1800 -#define EEPROM_SIZE_8KB 0x1400 -#define EEPROM_SIZE_4KB 0x1000 -#define EEPROM_SIZE_2KB 0x0C00 -#define EEPROM_SIZE_1KB 0x0800 -#define EEPROM_SIZE_512B 0x0400 -#define EEPROM_SIZE_128B 0x0000 +#define EEPROM_WORD_SIZE_SHIFT 6 +#define EEPROM_SIZE_SHIFT 10 #define EEPROM_SIZE_MASK 0x1C00 /* EEPROM Word Offsets */ @@ -1606,7 +2087,22 @@ struct e1000_hw { #define IFS_MIN 40 #define IFS_RATIO 4 +/* Extended Configuration Control and Size */ +#define E1000_EXTCNF_CTRL_PCIE_WRITE_ENABLE 0x00000001 +#define E1000_EXTCNF_CTRL_PHY_WRITE_ENABLE 0x00000002 +#define E1000_EXTCNF_CTRL_D_UD_ENABLE 0x00000004 +#define E1000_EXTCNF_CTRL_D_UD_LATENCY 0x00000008 +#define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010 +#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 +#define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040 +#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x1FFF0000 + +#define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF +#define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00 +#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000 + /* PBA constants */ +#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */ #define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */ #define E1000_PBA_22K 0x0016 #define E1000_PBA_24K 0x0018 @@ -1663,6 +2159,13 @@ struct e1000_hw { /* Number of milliseconds we wait for auto-negotiation to complete */ #define LINK_UP_TIMEOUT 500 +/* Number of 100 microseconds we wait for PCI Express master disable */ +#define MASTER_DISABLE_TIMEOUT 800 +/* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */ +#define AUTO_READ_DONE_TIMEOUT 10 +/* Number of milliseconds we wait for PHY configuration done after MAC reset */ +#define PHY_CFG_TIMEOUT 40 + #define E1000_TX_BUFFER_SIZE ((uint32_t)1514) /* The carrier extension symbol, as received by the NIC. */ @@ -1763,6 +2266,7 @@ struct e1000_hw { #define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */ #define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */ #define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */ +#define IGP02E1000_PHY_POWER_MGMT 0x19 #define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */ /* IGP01E1000 AGC Registers - stores the cable length values*/ @@ -1771,12 +2275,20 @@ struct e1000_hw { #define IGP01E1000_PHY_AGC_C 0x1472 #define IGP01E1000_PHY_AGC_D 0x1872 +/* IGP02E1000 AGC Registers for cable length values */ +#define IGP02E1000_PHY_AGC_A 0x11B1 +#define IGP02E1000_PHY_AGC_B 0x12B1 +#define IGP02E1000_PHY_AGC_C 0x14B1 +#define IGP02E1000_PHY_AGC_D 0x18B1 + /* IGP01E1000 DSP Reset Register */ #define IGP01E1000_PHY_DSP_RESET 0x1F33 #define IGP01E1000_PHY_DSP_SET 0x1F71 #define IGP01E1000_PHY_DSP_FFE 0x1F35 #define IGP01E1000_PHY_CHANNEL_NUM 4 +#define IGP02E1000_PHY_CHANNEL_NUM 4 + #define IGP01E1000_PHY_AGC_PARAM_A 0x1171 #define IGP01E1000_PHY_AGC_PARAM_B 0x1271 #define IGP01E1000_PHY_AGC_PARAM_C 0x1471 @@ -2060,20 +2572,30 @@ struct e1000_hw { #define IGP01E1000_MSE_CHANNEL_B 0x0F00 #define IGP01E1000_MSE_CHANNEL_A 0xF000 +#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ +#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */ +#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */ + /* IGP01E1000 DSP reset macros */ #define DSP_RESET_ENABLE 0x0 #define DSP_RESET_DISABLE 0x2 #define E1000_MAX_DSP_RESETS 10 -/* IGP01E1000 AGC Registers */ +/* IGP01E1000 & IGP02E1000 AGC Registers */ #define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */ +#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */ + +/* IGP02E1000 AGC Register Length 9-bit mask */ +#define IGP02E1000_AGC_LENGTH_MASK 0x7F /* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */ #define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128 +#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 128 -/* The precision of the length is +/- 10 meters */ +/* The precision error of the cable length is +/- 10 meters */ #define IGP01E1000_AGC_RANGE 10 +#define IGP02E1000_AGC_RANGE 10 /* IGP01E1000 PCS Initialization register */ /* bits 3:6 in the PCS registers stores the channels polarity */ @@ -2113,6 +2635,8 @@ struct e1000_hw { #define M88E1000_12_PHY_ID M88E1000_E_PHY_ID #define M88E1000_14_PHY_ID M88E1000_E_PHY_ID #define M88E1011_I_REV_4 0x04 +#define M88E1111_I_PHY_ID 0x01410CC0 +#define L1LXT971A_PHY_ID 0x001378E0 /* Miscellaneous PHY bit definitions. */ #define PHY_PREAMBLE 0xFFFFFFFF diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 82549a6fcfb..325495b8b60 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -29,33 +29,9 @@ #include "e1000.h" /* Change Log - * 5.3.12 6/7/04 - * - kcompat NETIF_MSG for older kernels (2.4.9) <sean.p.mcdermott@intel.com> - * - if_mii support and associated kcompat for older kernels - * - More errlogging support from Jon Mason <jonmason@us.ibm.com> - * - Fix TSO issues on PPC64 machines -- Jon Mason <jonmason@us.ibm.com> - * - * 5.7.1 12/16/04 - * - Resurrect 82547EI/GI related fix in e1000_intr to avoid deadlocks. This - * fix was removed as it caused system instability. The suspected cause of - * this is the called to e1000_irq_disable in e1000_intr. Inlined the - * required piece of e1000_irq_disable into e1000_intr - Anton Blanchard - * 5.7.0 12/10/04 - * - include fix to the condition that determines when to quit NAPI - Robert Olsson - * - use netif_poll_{disable/enable} to synchronize between NAPI and i/f up/down - * 5.6.5 11/01/04 - * - Enabling NETIF_F_SG without checksum offload is illegal - - John Mason <jdmason@us.ibm.com> - * 5.6.3 10/26/04 - * - Remove redundant initialization - Jamal Hadi - * - Reset buffer_info->dma in tx resource cleanup logic - * 5.6.2 10/12/04 - * - Avoid filling tx_ring completely - shemminger@osdl.org - * - Replace schedule_timeout() with msleep()/msleep_interruptible() - - * nacc@us.ibm.com - * - Sparse cleanup - shemminger@osdl.org - * - Fix tx resource cleanup logic - * - LLTX support - ak@suse.de and hadi@cyberus.ca + * 6.0.44+ 2/15/05 + * o applied Anton's patch to resolve tx hang in hardware + * o Applied Andrew Mortons patch - e1000 stops working after resume */ char e1000_driver_name[] = "e1000"; @@ -65,7 +41,7 @@ char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "5.7.6-k2"DRIVERNAPI +#define DRV_VERSION "6.0.54-k2"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; char e1000_copyright[] = "Copyright (c) 1999-2004 Intel Corporation."; @@ -96,6 +72,7 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x1017), INTEL_E1000_ETHERNET_DEVICE(0x1018), INTEL_E1000_ETHERNET_DEVICE(0x1019), + INTEL_E1000_ETHERNET_DEVICE(0x101A), INTEL_E1000_ETHERNET_DEVICE(0x101D), INTEL_E1000_ETHERNET_DEVICE(0x101E), INTEL_E1000_ETHERNET_DEVICE(0x1026), @@ -110,6 +87,9 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x107B), INTEL_E1000_ETHERNET_DEVICE(0x107C), INTEL_E1000_ETHERNET_DEVICE(0x108A), + INTEL_E1000_ETHERNET_DEVICE(0x108B), + INTEL_E1000_ETHERNET_DEVICE(0x108C), + INTEL_E1000_ETHERNET_DEVICE(0x1099), /* required last entry */ {0,} }; @@ -155,10 +135,14 @@ static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter); static int e1000_clean(struct net_device *netdev, int *budget); static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter, int *work_done, int work_to_do); +static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, + int *work_done, int work_to_do); #else static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter); +static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter); #endif static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter); +static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter); static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); @@ -286,7 +270,29 @@ e1000_irq_enable(struct e1000_adapter *adapter) E1000_WRITE_FLUSH(&adapter->hw); } } - +void +e1000_update_mng_vlan(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + uint16_t vid = adapter->hw.mng_cookie.vlan_id; + uint16_t old_vid = adapter->mng_vlan_id; + if(adapter->vlgrp) { + if(!adapter->vlgrp->vlan_devices[vid]) { + if(adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) { + e1000_vlan_rx_add_vid(netdev, vid); + adapter->mng_vlan_id = vid; + } else + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; + + if((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) && + (vid != old_vid) && + !adapter->vlgrp->vlan_devices[old_vid]) + e1000_vlan_rx_kill_vid(netdev, old_vid); + } + } +} + int e1000_up(struct e1000_adapter *adapter) { @@ -310,19 +316,33 @@ e1000_up(struct e1000_adapter *adapter) e1000_configure_tx(adapter); e1000_setup_rctl(adapter); e1000_configure_rx(adapter); - e1000_alloc_rx_buffers(adapter); + adapter->alloc_rx_buf(adapter); +#ifdef CONFIG_PCI_MSI + if(adapter->hw.mac_type > e1000_82547_rev_2) { + adapter->have_msi = TRUE; + if((err = pci_enable_msi(adapter->pdev))) { + DPRINTK(PROBE, ERR, + "Unable to allocate MSI interrupt Error: %d\n", err); + adapter->have_msi = FALSE; + } + } +#endif if((err = request_irq(adapter->pdev->irq, &e1000_intr, SA_SHIRQ | SA_SAMPLE_RANDOM, - netdev->name, netdev))) + netdev->name, netdev))) { + DPRINTK(PROBE, ERR, + "Unable to allocate interrupt Error: %d\n", err); return err; + } mod_timer(&adapter->watchdog_timer, jiffies); - e1000_irq_enable(adapter); #ifdef CONFIG_E1000_NAPI netif_poll_enable(netdev); #endif + e1000_irq_enable(adapter); + return 0; } @@ -333,6 +353,11 @@ e1000_down(struct e1000_adapter *adapter) e1000_irq_disable(adapter); free_irq(adapter->pdev->irq, netdev); +#ifdef CONFIG_PCI_MSI + if(adapter->hw.mac_type > e1000_82547_rev_2 && + adapter->have_msi == TRUE) + pci_disable_msi(adapter->pdev); +#endif del_timer_sync(&adapter->tx_fifo_stall_timer); del_timer_sync(&adapter->watchdog_timer); del_timer_sync(&adapter->phy_info_timer); @@ -350,62 +375,93 @@ e1000_down(struct e1000_adapter *adapter) e1000_clean_rx_ring(adapter); /* If WoL is not enabled + * and management mode is not IAMT * Power down the PHY so no link is implied when interface is down */ - if(!adapter->wol && adapter->hw.media_type == e1000_media_type_copper) { + if(!adapter->wol && adapter->hw.mac_type >= e1000_82540 && + adapter->hw.media_type == e1000_media_type_copper && + !e1000_check_mng_mode(&adapter->hw) && + !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN)) { uint16_t mii_reg; e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg); mii_reg |= MII_CR_POWER_DOWN; e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg); + mdelay(1); } } void e1000_reset(struct e1000_adapter *adapter) { - uint32_t pba; + struct net_device *netdev = adapter->netdev; + uint32_t pba, manc; + uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF; + uint16_t fc_low_water_mark = E1000_FC_LOW_DIFF; /* Repartition Pba for greater than 9k mtu * To take effect CTRL.RST is required. */ - if(adapter->hw.mac_type < e1000_82547) { - if(adapter->rx_buffer_len > E1000_RXBUFFER_8192) - pba = E1000_PBA_40K; - else - pba = E1000_PBA_48K; - } else { - if(adapter->rx_buffer_len > E1000_RXBUFFER_8192) - pba = E1000_PBA_22K; - else - pba = E1000_PBA_30K; + switch (adapter->hw.mac_type) { + case e1000_82547: + case e1000_82547_rev_2: + pba = E1000_PBA_30K; + break; + case e1000_82573: + pba = E1000_PBA_12K; + break; + default: + pba = E1000_PBA_48K; + break; + } + + if((adapter->hw.mac_type != e1000_82573) && + (adapter->rx_buffer_len > E1000_RXBUFFER_8192)) { + pba -= 8; /* allocate more FIFO for Tx */ + /* send an XOFF when there is enough space in the + * Rx FIFO to hold one extra full size Rx packet + */ + fc_high_water_mark = netdev->mtu + ENET_HEADER_SIZE + + ETHERNET_FCS_SIZE + 1; + fc_low_water_mark = fc_high_water_mark + 8; + } + + + if(adapter->hw.mac_type == e1000_82547) { adapter->tx_fifo_head = 0; adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT; adapter->tx_fifo_size = (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT; atomic_set(&adapter->tx_fifo_stall, 0); } + E1000_WRITE_REG(&adapter->hw, PBA, pba); /* flow control settings */ adapter->hw.fc_high_water = (pba << E1000_PBA_BYTES_SHIFT) - - E1000_FC_HIGH_DIFF; + fc_high_water_mark; adapter->hw.fc_low_water = (pba << E1000_PBA_BYTES_SHIFT) - - E1000_FC_LOW_DIFF; + fc_low_water_mark; adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME; adapter->hw.fc_send_xon = 1; adapter->hw.fc = adapter->hw.original_fc; + /* Allow time for pending master requests to run */ e1000_reset_hw(&adapter->hw); if(adapter->hw.mac_type >= e1000_82544) E1000_WRITE_REG(&adapter->hw, WUC, 0); if(e1000_init_hw(&adapter->hw)) DPRINTK(PROBE, ERR, "Hardware Error\n"); - + e1000_update_mng_vlan(adapter); /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE); e1000_reset_adaptive(&adapter->hw); e1000_phy_get_info(&adapter->hw, &adapter->phy_info); + if (adapter->en_mng_pt) { + manc = E1000_READ_REG(&adapter->hw, MANC); + manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST); + E1000_WRITE_REG(&adapter->hw, MANC, manc); + } } /** @@ -426,15 +482,13 @@ e1000_probe(struct pci_dev *pdev, { struct net_device *netdev; struct e1000_adapter *adapter; + unsigned long mmio_start, mmio_len; + uint32_t swsm; + static int cards_found = 0; - unsigned long mmio_start; - int mmio_len; - int pci_using_dac; - int i; - int err; + int i, err, pci_using_dac; uint16_t eeprom_data; uint16_t eeprom_apme_mask = E1000_EEPROM_APME; - if((err = pci_enable_device(pdev))) return err; @@ -521,6 +575,9 @@ e1000_probe(struct pci_dev *pdev, if((err = e1000_sw_init(adapter))) goto err_sw_init; + if((err = e1000_check_phy_reset_block(&adapter->hw))) + DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n"); + if(adapter->hw.mac_type >= e1000_82543) { netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM | @@ -533,6 +590,11 @@ e1000_probe(struct pci_dev *pdev, if((adapter->hw.mac_type >= e1000_82544) && (adapter->hw.mac_type != e1000_82547)) netdev->features |= NETIF_F_TSO; + +#ifdef NETIF_F_TSO_IPV6 + if(adapter->hw.mac_type > e1000_82547_rev_2) + netdev->features |= NETIF_F_TSO_IPV6; +#endif #endif if(pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; @@ -540,6 +602,8 @@ e1000_probe(struct pci_dev *pdev, /* hard_start_xmit is safe against parallel locking */ netdev->features |= NETIF_F_LLTX; + adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw); + /* before reading the EEPROM, reset the controller to * put the device in a known good starting state */ @@ -555,7 +619,7 @@ e1000_probe(struct pci_dev *pdev, /* copy the MAC address out of the EEPROM */ - if (e1000_read_mac_addr(&adapter->hw)) + if(e1000_read_mac_addr(&adapter->hw)) DPRINTK(PROBE, ERR, "EEPROM Read Error\n"); memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); @@ -629,6 +693,17 @@ e1000_probe(struct pci_dev *pdev, /* reset the hardware with the new settings */ e1000_reset(adapter); + /* Let firmware know the driver has taken over */ + switch(adapter->hw.mac_type) { + case e1000_82573: + swsm = E1000_READ_REG(&adapter->hw, SWSM); + E1000_WRITE_REG(&adapter->hw, SWSM, + swsm | E1000_SWSM_DRV_LOAD); + break; + default: + break; + } + strcpy(netdev->name, "eth%d"); if((err = register_netdev(netdev))) goto err_register; @@ -664,7 +739,7 @@ e1000_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev->priv; - uint32_t manc; + uint32_t manc, swsm; flush_scheduled_work(); @@ -677,9 +752,21 @@ e1000_remove(struct pci_dev *pdev) } } + switch(adapter->hw.mac_type) { + case e1000_82573: + swsm = E1000_READ_REG(&adapter->hw, SWSM); + E1000_WRITE_REG(&adapter->hw, SWSM, + swsm & ~E1000_SWSM_DRV_LOAD); + break; + + default: + break; + } + unregister_netdev(netdev); - e1000_phy_hw_reset(&adapter->hw); + if(!e1000_check_phy_reset_block(&adapter->hw)) + e1000_phy_hw_reset(&adapter->hw); iounmap(adapter->hw.hw_addr); pci_release_regions(pdev); @@ -717,6 +804,7 @@ e1000_sw_init(struct e1000_adapter *adapter) pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word); adapter->rx_buffer_len = E1000_RXBUFFER_2048; + adapter->rx_ps_bsize0 = E1000_RXBUFFER_256; hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE; @@ -730,7 +818,10 @@ e1000_sw_init(struct e1000_adapter *adapter) /* initialize eeprom parameters */ - e1000_init_eeprom_params(hw); + if(e1000_init_eeprom_params(hw)) { + E1000_ERR("EEPROM initialization failed\n"); + return -EIO; + } switch(hw->mac_type) { default: @@ -795,6 +886,11 @@ e1000_open(struct net_device *netdev) if((err = e1000_up(adapter))) goto err_up; + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; + if((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) { + e1000_update_mng_vlan(adapter); + } return E1000_SUCCESS; @@ -830,14 +926,18 @@ e1000_close(struct net_device *netdev) e1000_free_tx_resources(adapter); e1000_free_rx_resources(adapter); + if((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) { + e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); + } return 0; } /** * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary * @adapter: address of board private structure - * @begin: address of beginning of memory - * @end: address of end of memory + * @start: address of beginning of memory + * @len: length of memory **/ static inline boolean_t e1000_check_64k_bound(struct e1000_adapter *adapter, @@ -846,12 +946,10 @@ e1000_check_64k_bound(struct e1000_adapter *adapter, unsigned long begin = (unsigned long) start; unsigned long end = begin + len; - /* first rev 82545 and 82546 need to not allow any memory - * write location to cross a 64k boundary due to errata 23 */ + /* First rev 82545 and 82546 need to not allow any memory + * write location to cross 64k boundary due to errata 23 */ if (adapter->hw.mac_type == e1000_82545 || - adapter->hw.mac_type == e1000_82546 ) { - - /* check buffer doesn't cross 64kB */ + adapter->hw.mac_type == e1000_82546) { return ((begin ^ (end - 1)) >> 16) != 0 ? FALSE : TRUE; } @@ -875,8 +973,8 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter) size = sizeof(struct e1000_buffer) * txdr->count; txdr->buffer_info = vmalloc(size); if(!txdr->buffer_info) { - DPRINTK(PROBE, ERR, - "Unable to Allocate Memory for the Transmit descriptor ring\n"); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the transmit descriptor ring\n"); return -ENOMEM; } memset(txdr->buffer_info, 0, size); @@ -889,38 +987,38 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter) txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma); if(!txdr->desc) { setup_tx_desc_die: - DPRINTK(PROBE, ERR, - "Unable to Allocate Memory for the Transmit descriptor ring\n"); vfree(txdr->buffer_info); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the transmit descriptor ring\n"); return -ENOMEM; } - /* fix for errata 23, cant cross 64kB boundary */ + /* Fix for errata 23, can't cross 64kB boundary */ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) { void *olddesc = txdr->desc; dma_addr_t olddma = txdr->dma; - DPRINTK(TX_ERR,ERR,"txdr align check failed: %u bytes at %p\n", - txdr->size, txdr->desc); - /* try again, without freeing the previous */ + DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes " + "at %p\n", txdr->size, txdr->desc); + /* Try again, without freeing the previous */ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma); - /* failed allocation, critial failure */ if(!txdr->desc) { + /* Failed allocation, critical failure */ pci_free_consistent(pdev, txdr->size, olddesc, olddma); goto setup_tx_desc_die; } if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) { /* give up */ - pci_free_consistent(pdev, txdr->size, - txdr->desc, txdr->dma); + pci_free_consistent(pdev, txdr->size, txdr->desc, + txdr->dma); pci_free_consistent(pdev, txdr->size, olddesc, olddma); DPRINTK(PROBE, ERR, - "Unable to Allocate aligned Memory for the Transmit" - " descriptor ring\n"); + "Unable to allocate aligned memory " + "for the transmit descriptor ring\n"); vfree(txdr->buffer_info); return -ENOMEM; } else { - /* free old, move on with the new one since its okay */ + /* Free old allocation, new allocation was successful */ pci_free_consistent(pdev, txdr->size, olddesc, olddma); } } @@ -1022,59 +1120,88 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter) { struct e1000_desc_ring *rxdr = &adapter->rx_ring; struct pci_dev *pdev = adapter->pdev; - int size; + int size, desc_len; size = sizeof(struct e1000_buffer) * rxdr->count; rxdr->buffer_info = vmalloc(size); if(!rxdr->buffer_info) { - DPRINTK(PROBE, ERR, - "Unable to Allocate Memory for the Recieve descriptor ring\n"); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the receive descriptor ring\n"); return -ENOMEM; } memset(rxdr->buffer_info, 0, size); + size = sizeof(struct e1000_ps_page) * rxdr->count; + rxdr->ps_page = kmalloc(size, GFP_KERNEL); + if(!rxdr->ps_page) { + vfree(rxdr->buffer_info); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the receive descriptor ring\n"); + return -ENOMEM; + } + memset(rxdr->ps_page, 0, size); + + size = sizeof(struct e1000_ps_page_dma) * rxdr->count; + rxdr->ps_page_dma = kmalloc(size, GFP_KERNEL); + if(!rxdr->ps_page_dma) { + vfree(rxdr->buffer_info); + kfree(rxdr->ps_page); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the receive descriptor ring\n"); + return -ENOMEM; + } + memset(rxdr->ps_page_dma, 0, size); + + if(adapter->hw.mac_type <= e1000_82547_rev_2) + desc_len = sizeof(struct e1000_rx_desc); + else + desc_len = sizeof(union e1000_rx_desc_packet_split); + /* Round up to nearest 4K */ - rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc); + rxdr->size = rxdr->count * desc_len; E1000_ROUNDUP(rxdr->size, 4096); rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma); if(!rxdr->desc) { setup_rx_desc_die: - DPRINTK(PROBE, ERR, - "Unble to Allocate Memory for the Recieve descriptor ring\n"); vfree(rxdr->buffer_info); + kfree(rxdr->ps_page); + kfree(rxdr->ps_page_dma); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the receive descriptor ring\n"); return -ENOMEM; } - /* fix for errata 23, cant cross 64kB boundary */ + /* Fix for errata 23, can't cross 64kB boundary */ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) { void *olddesc = rxdr->desc; dma_addr_t olddma = rxdr->dma; - DPRINTK(RX_ERR,ERR, - "rxdr align check failed: %u bytes at %p\n", - rxdr->size, rxdr->desc); - /* try again, without freeing the previous */ + DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes " + "at %p\n", rxdr->size, rxdr->desc); + /* Try again, without freeing the previous */ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma); - /* failed allocation, critial failure */ if(!rxdr->desc) { + /* Failed allocation, critical failure */ pci_free_consistent(pdev, rxdr->size, olddesc, olddma); goto setup_rx_desc_die; } if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) { /* give up */ - pci_free_consistent(pdev, rxdr->size, - rxdr->desc, rxdr->dma); + pci_free_consistent(pdev, rxdr->size, rxdr->desc, + rxdr->dma); pci_free_consistent(pdev, rxdr->size, olddesc, olddma); - DPRINTK(PROBE, ERR, - "Unable to Allocate aligned Memory for the" - " Receive descriptor ring\n"); + DPRINTK(PROBE, ERR, + "Unable to allocate aligned memory " + "for the receive descriptor ring\n"); vfree(rxdr->buffer_info); + kfree(rxdr->ps_page); + kfree(rxdr->ps_page_dma); return -ENOMEM; } else { - /* free old, move on with the new one since its okay */ + /* Free old allocation, new allocation was successful */ pci_free_consistent(pdev, rxdr->size, olddesc, olddma); } } @@ -1087,14 +1214,15 @@ setup_rx_desc_die: } /** - * e1000_setup_rctl - configure the receive control register + * e1000_setup_rctl - configure the receive control registers * @adapter: Board private structure **/ static void e1000_setup_rctl(struct e1000_adapter *adapter) { - uint32_t rctl; + uint32_t rctl, rfctl; + uint32_t psrctl = 0; rctl = E1000_READ_REG(&adapter->hw, RCTL); @@ -1109,24 +1237,69 @@ e1000_setup_rctl(struct e1000_adapter *adapter) else rctl &= ~E1000_RCTL_SBP; + if (adapter->netdev->mtu <= ETH_DATA_LEN) + rctl &= ~E1000_RCTL_LPE; + else + rctl |= E1000_RCTL_LPE; + /* Setup buffer sizes */ - rctl &= ~(E1000_RCTL_SZ_4096); - rctl |= (E1000_RCTL_BSEX | E1000_RCTL_LPE); - switch (adapter->rx_buffer_len) { - case E1000_RXBUFFER_2048: - default: - rctl |= E1000_RCTL_SZ_2048; - rctl &= ~(E1000_RCTL_BSEX | E1000_RCTL_LPE); - break; - case E1000_RXBUFFER_4096: - rctl |= E1000_RCTL_SZ_4096; - break; - case E1000_RXBUFFER_8192: - rctl |= E1000_RCTL_SZ_8192; - break; - case E1000_RXBUFFER_16384: - rctl |= E1000_RCTL_SZ_16384; - break; + if(adapter->hw.mac_type == e1000_82573) { + /* We can now specify buffers in 1K increments. + * BSIZE and BSEX are ignored in this case. */ + rctl |= adapter->rx_buffer_len << 0x11; + } else { + rctl &= ~E1000_RCTL_SZ_4096; + rctl |= E1000_RCTL_BSEX; + switch (adapter->rx_buffer_len) { + case E1000_RXBUFFER_2048: + default: + rctl |= E1000_RCTL_SZ_2048; + rctl &= ~E1000_RCTL_BSEX; + break; + case E1000_RXBUFFER_4096: + rctl |= E1000_RCTL_SZ_4096; + break; + case E1000_RXBUFFER_8192: + rctl |= E1000_RCTL_SZ_8192; + break; + case E1000_RXBUFFER_16384: + rctl |= E1000_RCTL_SZ_16384; + break; + } + } + +#ifdef CONFIG_E1000_PACKET_SPLIT + /* 82571 and greater support packet-split where the protocol + * header is placed in skb->data and the packet data is + * placed in pages hanging off of skb_shinfo(skb)->nr_frags. + * In the case of a non-split, skb->data is linearly filled, + * followed by the page buffers. Therefore, skb->data is + * sized to hold the largest protocol header. + */ + adapter->rx_ps = (adapter->hw.mac_type > e1000_82547_rev_2) + && (adapter->netdev->mtu + < ((3 * PAGE_SIZE) + adapter->rx_ps_bsize0)); +#endif + if(adapter->rx_ps) { + /* Configure extra packet-split registers */ + rfctl = E1000_READ_REG(&adapter->hw, RFCTL); + rfctl |= E1000_RFCTL_EXTEN; + /* disable IPv6 packet split support */ + rfctl |= E1000_RFCTL_IPV6_DIS; + E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl); + + rctl |= E1000_RCTL_DTYP_PS | E1000_RCTL_SECRC; + + psrctl |= adapter->rx_ps_bsize0 >> + E1000_PSRCTL_BSIZE0_SHIFT; + psrctl |= PAGE_SIZE >> + E1000_PSRCTL_BSIZE1_SHIFT; + psrctl |= PAGE_SIZE << + E1000_PSRCTL_BSIZE2_SHIFT; + psrctl |= PAGE_SIZE << + E1000_PSRCTL_BSIZE3_SHIFT; + + E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl); } E1000_WRITE_REG(&adapter->hw, RCTL, rctl); @@ -1143,9 +1316,18 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) { uint64_t rdba = adapter->rx_ring.dma; - uint32_t rdlen = adapter->rx_ring.count * sizeof(struct e1000_rx_desc); - uint32_t rctl; - uint32_t rxcsum; + uint32_t rdlen, rctl, rxcsum; + + if(adapter->rx_ps) { + rdlen = adapter->rx_ring.count * + sizeof(union e1000_rx_desc_packet_split); + adapter->clean_rx = e1000_clean_rx_irq_ps; + adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps; + } else { + rdlen = adapter->rx_ring.count * sizeof(struct e1000_rx_desc); + adapter->clean_rx = e1000_clean_rx_irq; + adapter->alloc_rx_buf = e1000_alloc_rx_buffers; + } /* disable receives while setting up the descriptors */ rctl = E1000_READ_REG(&adapter->hw, RCTL); @@ -1172,13 +1354,27 @@ e1000_configure_rx(struct e1000_adapter *adapter) E1000_WRITE_REG(&adapter->hw, RDT, 0); /* Enable 82543 Receive Checksum Offload for TCP and UDP */ - if((adapter->hw.mac_type >= e1000_82543) && - (adapter->rx_csum == TRUE)) { + if(adapter->hw.mac_type >= e1000_82543) { rxcsum = E1000_READ_REG(&adapter->hw, RXCSUM); - rxcsum |= E1000_RXCSUM_TUOFL; + if(adapter->rx_csum == TRUE) { + rxcsum |= E1000_RXCSUM_TUOFL; + + /* Enable 82573 IPv4 payload checksum for UDP fragments + * Must be used in conjunction with packet-split. */ + if((adapter->hw.mac_type > e1000_82547_rev_2) && + (adapter->rx_ps)) { + rxcsum |= E1000_RXCSUM_IPPCSE; + } + } else { + rxcsum &= ~E1000_RXCSUM_TUOFL; + /* don't need to clear IPPCSE as it defaults to 0 */ + } E1000_WRITE_REG(&adapter->hw, RXCSUM, rxcsum); } + if (adapter->hw.mac_type == e1000_82573) + E1000_WRITE_REG(&adapter->hw, ERT, 0x0100); + /* Enable Receives */ E1000_WRITE_REG(&adapter->hw, RCTL, rctl); } @@ -1210,13 +1406,11 @@ static inline void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter, struct e1000_buffer *buffer_info) { - struct pci_dev *pdev = adapter->pdev; - if(buffer_info->dma) { - pci_unmap_page(pdev, - buffer_info->dma, - buffer_info->length, - PCI_DMA_TODEVICE); + pci_unmap_page(adapter->pdev, + buffer_info->dma, + buffer_info->length, + PCI_DMA_TODEVICE); buffer_info->dma = 0; } if(buffer_info->skb) { @@ -1241,7 +1435,7 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter) /* Free all the Tx ring sk_buffs */ if (likely(adapter->previous_buffer_info.skb != NULL)) { - e1000_unmap_and_free_tx_resource(adapter, + e1000_unmap_and_free_tx_resource(adapter, &adapter->previous_buffer_info); } @@ -1281,6 +1475,10 @@ e1000_free_rx_resources(struct e1000_adapter *adapter) vfree(rx_ring->buffer_info); rx_ring->buffer_info = NULL; + kfree(rx_ring->ps_page); + rx_ring->ps_page = NULL; + kfree(rx_ring->ps_page_dma); + rx_ring->ps_page_dma = NULL; pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma); @@ -1297,16 +1495,19 @@ e1000_clean_rx_ring(struct e1000_adapter *adapter) { struct e1000_desc_ring *rx_ring = &adapter->rx_ring; struct e1000_buffer *buffer_info; + struct e1000_ps_page *ps_page; + struct e1000_ps_page_dma *ps_page_dma; struct pci_dev *pdev = adapter->pdev; unsigned long size; - unsigned int i; + unsigned int i, j; /* Free all the Rx ring sk_buffs */ for(i = 0; i < rx_ring->count; i++) { buffer_info = &rx_ring->buffer_info[i]; if(buffer_info->skb) { - + ps_page = &rx_ring->ps_page[i]; + ps_page_dma = &rx_ring->ps_page_dma[i]; pci_unmap_single(pdev, buffer_info->dma, buffer_info->length, @@ -1314,11 +1515,25 @@ e1000_clean_rx_ring(struct e1000_adapter *adapter) dev_kfree_skb(buffer_info->skb); buffer_info->skb = NULL; + + for(j = 0; j < PS_PAGE_BUFFERS; j++) { + if(!ps_page->ps_page[j]) break; + pci_unmap_single(pdev, + ps_page_dma->ps_page_dma[j], + PAGE_SIZE, PCI_DMA_FROMDEVICE); + ps_page_dma->ps_page_dma[j] = 0; + put_page(ps_page->ps_page[j]); + ps_page->ps_page[j] = NULL; + } } } size = sizeof(struct e1000_buffer) * rx_ring->count; memset(rx_ring->buffer_info, 0, size); + size = sizeof(struct e1000_ps_page) * rx_ring->count; + memset(rx_ring->ps_page, 0, size); + size = sizeof(struct e1000_ps_page_dma) * rx_ring->count; + memset(rx_ring->ps_page_dma, 0, size); /* Zero out the descriptor ring */ @@ -1422,15 +1637,15 @@ e1000_set_multi(struct net_device *netdev) struct e1000_adapter *adapter = netdev->priv; struct e1000_hw *hw = &adapter->hw; struct dev_mc_list *mc_ptr; + unsigned long flags; uint32_t rctl; uint32_t hash_value; int i; - unsigned long flags; - - /* Check for Promiscuous and All Multicast modes */ spin_lock_irqsave(&adapter->tx_lock, flags); + /* Check for Promiscuous and All Multicast modes */ + rctl = E1000_READ_REG(hw, RCTL); if(netdev->flags & IFF_PROMISC) { @@ -1556,6 +1771,11 @@ e1000_watchdog_task(struct e1000_adapter *adapter) uint32_t link; e1000_check_for_link(&adapter->hw); + if (adapter->hw.mac_type == e1000_82573) { + e1000_enable_tx_pkt_filtering(&adapter->hw); + if(adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id) + e1000_update_mng_vlan(adapter); + } if((adapter->hw.media_type == e1000_media_type_internal_serdes) && !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE)) @@ -1632,7 +1852,7 @@ e1000_watchdog_task(struct e1000_adapter *adapter) /* Cause software interrupt to ensure rx ring is cleaned */ E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0); - /* Force detection of hung controller every watchdog period*/ + /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = TRUE; /* Reset the timer */ @@ -1642,6 +1862,7 @@ e1000_watchdog_task(struct e1000_adapter *adapter) #define E1000_TX_FLAGS_CSUM 0x00000001 #define E1000_TX_FLAGS_VLAN 0x00000002 #define E1000_TX_FLAGS_TSO 0x00000004 +#define E1000_TX_FLAGS_IPV4 0x00000008 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000 #define E1000_TX_FLAGS_VLAN_SHIFT 16 @@ -1652,7 +1873,7 @@ e1000_tso(struct e1000_adapter *adapter, struct sk_buff *skb) struct e1000_context_desc *context_desc; unsigned int i; uint32_t cmd_length = 0; - uint16_t ipcse, tucse, mss; + uint16_t ipcse = 0, tucse, mss; uint8_t ipcss, ipcso, tucss, tucso, hdr_len; int err; @@ -1665,23 +1886,37 @@ e1000_tso(struct e1000_adapter *adapter, struct sk_buff *skb) hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2)); mss = skb_shinfo(skb)->tso_size; - skb->nh.iph->tot_len = 0; - skb->nh.iph->check = 0; - skb->h.th->check = ~csum_tcpudp_magic(skb->nh.iph->saddr, - skb->nh.iph->daddr, - 0, - IPPROTO_TCP, - 0); + if(skb->protocol == ntohs(ETH_P_IP)) { + skb->nh.iph->tot_len = 0; + skb->nh.iph->check = 0; + skb->h.th->check = + ~csum_tcpudp_magic(skb->nh.iph->saddr, + skb->nh.iph->daddr, + 0, + IPPROTO_TCP, + 0); + cmd_length = E1000_TXD_CMD_IP; + ipcse = skb->h.raw - skb->data - 1; +#ifdef NETIF_F_TSO_IPV6 + } else if(skb->protocol == ntohs(ETH_P_IPV6)) { + skb->nh.ipv6h->payload_len = 0; + skb->h.th->check = + ~csum_ipv6_magic(&skb->nh.ipv6h->saddr, + &skb->nh.ipv6h->daddr, + 0, + IPPROTO_TCP, + 0); + ipcse = 0; +#endif + } ipcss = skb->nh.raw - skb->data; ipcso = (void *)&(skb->nh.iph->check) - (void *)skb->data; - ipcse = skb->h.raw - skb->data - 1; tucss = skb->h.raw - skb->data; tucso = (void *)&(skb->h.th->check) - (void *)skb->data; tucse = 0; cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE | - E1000_TXD_CMD_IP | E1000_TXD_CMD_TCP | - (skb->len - (hdr_len))); + E1000_TXD_CMD_TCP | (skb->len - (hdr_len))); i = adapter->tx_ring.next_to_use; context_desc = E1000_CONTEXT_DESC(adapter->tx_ring, i); @@ -1760,6 +1995,15 @@ e1000_tx_map(struct e1000_adapter *adapter, struct sk_buff *skb, if(unlikely(mss && !nr_frags && size == len && size > 8)) size -= 4; #endif + /* work-around for errata 10 and it applies + * to all controllers in PCI-X mode + * The fix is to make sure that the first descriptor of a + * packet is smaller than 2048 - 16 - 16 (or 2016) bytes + */ + if(unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) && + (size > 2015) && count == 0)) + size = 2015; + /* Workaround for potential 82544 hang in PCI-X. Avoid * terminating buffers within evenly-aligned dwords. */ if(unlikely(adapter->pcix_82544 && @@ -1840,7 +2084,10 @@ e1000_tx_queue(struct e1000_adapter *adapter, int count, int tx_flags) if(likely(tx_flags & E1000_TX_FLAGS_TSO)) { txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D | E1000_TXD_CMD_TSE; - txd_upper |= (E1000_TXD_POPTS_IXSM | E1000_TXD_POPTS_TXSM) << 8; + txd_upper |= E1000_TXD_POPTS_TXSM << 8; + + if(likely(tx_flags & E1000_TX_FLAGS_IPV4)) + txd_upper |= E1000_TXD_POPTS_IXSM << 8; } if(likely(tx_flags & E1000_TX_FLAGS_CSUM)) { @@ -1915,6 +2162,53 @@ no_fifo_stall_required: return 0; } +#define MINIMUM_DHCP_PACKET_SIZE 282 +static inline int +e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb) +{ + struct e1000_hw *hw = &adapter->hw; + uint16_t length, offset; + if(vlan_tx_tag_present(skb)) { + if(!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) && + ( adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) ) + return 0; + } + if(htons(ETH_P_IP) == skb->protocol) { + const struct iphdr *ip = skb->nh.iph; + if(IPPROTO_UDP == ip->protocol) { + struct udphdr *udp = (struct udphdr *)(skb->h.uh); + if(ntohs(udp->dest) == 67) { + offset = (uint8_t *)udp + 8 - skb->data; + length = skb->len - offset; + + return e1000_mng_write_dhcp_info(hw, + (uint8_t *)udp + 8, length); + } + } + } else if((skb->len > MINIMUM_DHCP_PACKET_SIZE) && (!skb->protocol)) { + struct ethhdr *eth = (struct ethhdr *) skb->data; + if((htons(ETH_P_IP) == eth->h_proto)) { + const struct iphdr *ip = + (struct iphdr *)((uint8_t *)skb->data+14); + if(IPPROTO_UDP == ip->protocol) { + struct udphdr *udp = + (struct udphdr *)((uint8_t *)ip + + (ip->ihl << 2)); + if(ntohs(udp->dest) == 67) { + offset = (uint8_t *)udp + 8 - skb->data; + length = skb->len - offset; + + return e1000_mng_write_dhcp_info(hw, + (uint8_t *)udp + 8, + length); + } + } + } + } + return 0; +} + #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 ) static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) @@ -1939,7 +2233,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) #ifdef NETIF_F_TSO mss = skb_shinfo(skb)->tso_size; - /* The controller does a simple calculation to + /* The controller does a simple calculation to * make sure there is enough room in the FIFO before * initiating the DMA for each buffer. The calc is: * 4 = ceil(buffer len/mss). To make sure we don't @@ -1952,7 +2246,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if((mss) || (skb->ip_summed == CHECKSUM_HW)) count++; - count++; /* for sentinel desc */ + count++; #else if(skb->ip_summed == CHECKSUM_HW) count++; @@ -1962,6 +2256,13 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if(adapter->pcix_82544) count++; + /* work-around for errata 10 and it applies to all controllers + * in PCI-X mode, so add one more descriptor to the count + */ + if(unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) && + (len > 2015))) + count++; + nr_frags = skb_shinfo(skb)->nr_frags; for(f = 0; f < nr_frags; f++) count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size, @@ -1975,6 +2276,9 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) local_irq_restore(flags); return NETDEV_TX_LOCKED; } + if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) ) + e1000_transfer_dhcp_info(adapter, skb); + /* need: count + 2 desc gap to keep tail from touching * head, otherwise try next time */ @@ -2011,6 +2315,12 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) else if(likely(e1000_tx_csum(adapter, skb))) tx_flags |= E1000_TX_FLAGS_CSUM; + /* Old method was to assume IPv4 packet by default if TSO was enabled. + * 82573 hardware supports TSO capabilities for IPv6 as well... + * no longer assume, we must. */ + if(likely(skb->protocol == ntohs(ETH_P_IP))) + tx_flags |= E1000_TX_FLAGS_IPV4; + e1000_tx_queue(adapter, e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss), tx_flags); @@ -2077,7 +2387,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) { struct e1000_adapter *adapter = netdev->priv; - int old_mtu = adapter->rx_buffer_len; int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) || @@ -2086,29 +2395,45 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) return -EINVAL; } - if(max_frame <= MAXIMUM_ETHERNET_FRAME_SIZE) { - adapter->rx_buffer_len = E1000_RXBUFFER_2048; - - } else if(adapter->hw.mac_type < e1000_82543) { - DPRINTK(PROBE, ERR, "Jumbo Frames not supported on 82542\n"); +#define MAX_STD_JUMBO_FRAME_SIZE 9216 + /* might want this to be bigger enum check... */ + if (adapter->hw.mac_type == e1000_82573 && + max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) { + DPRINTK(PROBE, ERR, "Jumbo Frames not supported " + "on 82573\n"); return -EINVAL; + } - } else if(max_frame <= E1000_RXBUFFER_4096) { - adapter->rx_buffer_len = E1000_RXBUFFER_4096; - - } else if(max_frame <= E1000_RXBUFFER_8192) { - adapter->rx_buffer_len = E1000_RXBUFFER_8192; - + if(adapter->hw.mac_type > e1000_82547_rev_2) { + adapter->rx_buffer_len = max_frame; + E1000_ROUNDUP(adapter->rx_buffer_len, 1024); } else { - adapter->rx_buffer_len = E1000_RXBUFFER_16384; + if(unlikely((adapter->hw.mac_type < e1000_82543) && + (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE))) { + DPRINTK(PROBE, ERR, "Jumbo Frames not supported " + "on 82542\n"); + return -EINVAL; + + } else { + if(max_frame <= E1000_RXBUFFER_2048) { + adapter->rx_buffer_len = E1000_RXBUFFER_2048; + } else if(max_frame <= E1000_RXBUFFER_4096) { + adapter->rx_buffer_len = E1000_RXBUFFER_4096; + } else if(max_frame <= E1000_RXBUFFER_8192) { + adapter->rx_buffer_len = E1000_RXBUFFER_8192; + } else if(max_frame <= E1000_RXBUFFER_16384) { + adapter->rx_buffer_len = E1000_RXBUFFER_16384; + } + } } - if(old_mtu != adapter->rx_buffer_len && netif_running(netdev)) { + netdev->mtu = new_mtu; + + if(netif_running(netdev)) { e1000_down(adapter); e1000_up(adapter); } - netdev->mtu = new_mtu; adapter->hw.max_frame_size = max_frame; return 0; @@ -2199,6 +2524,17 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC); adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC); } + if(hw->mac_type > e1000_82547_rev_2) { + adapter->stats.iac += E1000_READ_REG(hw, IAC); + adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC); + adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC); + adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC); + adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC); + adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC); + adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC); + adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC); + adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC); + } /* Fill out the OS statistics structure */ @@ -2213,9 +2549,9 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->net_stats.rx_errors = adapter->stats.rxerrc + adapter->stats.crcerrs + adapter->stats.algnerrc + - adapter->stats.rlec + adapter->stats.rnbc + - adapter->stats.mpc + adapter->stats.cexterr; - adapter->net_stats.rx_dropped = adapter->stats.rnbc; + adapter->stats.rlec + adapter->stats.mpc + + adapter->stats.cexterr; + adapter->net_stats.rx_dropped = adapter->stats.mpc; adapter->net_stats.rx_length_errors = adapter->stats.rlec; adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs; adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc; @@ -2300,11 +2636,11 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) */ if(hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2){ atomic_inc(&adapter->irq_sem); - E1000_WRITE_REG(&adapter->hw, IMC, ~0); + E1000_WRITE_REG(hw, IMC, ~0); } for(i = 0; i < E1000_MAX_INTR; i++) - if(unlikely(!e1000_clean_rx_irq(adapter) & + if(unlikely(!adapter->clean_rx(adapter) & !e1000_clean_tx_irq(adapter))) break; @@ -2328,16 +2664,15 @@ e1000_clean(struct net_device *netdev, int *budget) int work_to_do = min(*budget, netdev->quota); int tx_cleaned; int work_done = 0; - + tx_cleaned = e1000_clean_tx_irq(adapter); - e1000_clean_rx_irq(adapter, &work_done, work_to_do); + adapter->clean_rx(adapter, &work_done, work_to_do); *budget -= work_done; netdev->quota -= work_done; - /* if no Tx and not enough Rx work done, exit the polling mode */ - if((!tx_cleaned && (work_done < work_to_do)) || - !netif_running(netdev)) { + /* If no Tx and no Rx work done, exit the polling mode */ + if ((!tx_cleaned && (work_done == 0)) || !netif_running(netdev)) { netif_rx_complete(netdev); e1000_irq_enable(adapter); return 0; @@ -2367,11 +2702,10 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) eop_desc = E1000_TX_DESC(*tx_ring, eop); while(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) { - /* pre-mature writeback of Tx descriptors */ - /* clear (free buffers and unmap pci_mapping) */ - /* previous_buffer_info */ + /* Premature writeback of Tx descriptors clear (free buffers + * and unmap pci_mapping) previous_buffer_info */ if (likely(adapter->previous_buffer_info.skb != NULL)) { - e1000_unmap_and_free_tx_resource(adapter, + e1000_unmap_and_free_tx_resource(adapter, &adapter->previous_buffer_info); } @@ -2380,26 +2714,30 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); - /* pre-mature writeback of Tx descriptors */ - /* save the cleaning of the this for the */ - /* next iteration */ - if (cleaned) { - memcpy(&adapter->previous_buffer_info, - buffer_info, - sizeof(struct e1000_buffer)); - memset(buffer_info, - 0, - sizeof(struct e1000_buffer)); +#ifdef NETIF_F_TSO + if (!(netdev->features & NETIF_F_TSO)) { +#endif + e1000_unmap_and_free_tx_resource(adapter, + buffer_info); +#ifdef NETIF_F_TSO } else { - e1000_unmap_and_free_tx_resource(adapter, - buffer_info); + if (cleaned) { + memcpy(&adapter->previous_buffer_info, + buffer_info, + sizeof(struct e1000_buffer)); + memset(buffer_info, 0, + sizeof(struct e1000_buffer)); + } else { + e1000_unmap_and_free_tx_resource( + adapter, buffer_info); + } } +#endif tx_desc->buffer_addr = 0; tx_desc->lower.data = 0; tx_desc->upper.data = 0; - cleaned = (i == eop); if(unlikely(++i == tx_ring->count)) i = 0; } @@ -2416,57 +2754,107 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) netif_wake_queue(netdev); spin_unlock(&adapter->tx_lock); - if(adapter->detect_tx_hung) { - /* detect a transmit hang in hardware, this serializes the + + /* Detect a transmit hang in hardware, this serializes the * check with the clearing of time_stamp and movement of i */ adapter->detect_tx_hung = FALSE; - if(tx_ring->buffer_info[i].dma && - time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ) && - !(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_TXOFF)) + if (tx_ring->buffer_info[i].dma && + time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ) + && !(E1000_READ_REG(&adapter->hw, STATUS) & + E1000_STATUS_TXOFF)) { + + /* detected Tx unit hang */ + i = tx_ring->next_to_clean; + eop = tx_ring->buffer_info[i].next_to_watch; + eop_desc = E1000_TX_DESC(*tx_ring, eop); + DPRINTK(TX_ERR, ERR, "Detected Tx Unit Hang\n" + " TDH <%x>\n" + " TDT <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + "buffer_info[next_to_clean]\n" + " dma <%llx>\n" + " time_stamp <%lx>\n" + " next_to_watch <%x>\n" + " jiffies <%lx>\n" + " next_to_watch.status <%x>\n", + E1000_READ_REG(&adapter->hw, TDH), + E1000_READ_REG(&adapter->hw, TDT), + tx_ring->next_to_use, + i, + tx_ring->buffer_info[i].dma, + tx_ring->buffer_info[i].time_stamp, + eop, + jiffies, + eop_desc->upper.fields.status); netif_stop_queue(netdev); + } } +#ifdef NETIF_F_TSO + + if( unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && + time_after(jiffies, adapter->previous_buffer_info.time_stamp + HZ))) + e1000_unmap_and_free_tx_resource( + adapter, &adapter->previous_buffer_info); +#endif return cleaned; } /** * e1000_rx_checksum - Receive Checksum Offload for 82543 - * @adapter: board private structure - * @rx_desc: receive descriptor - * @sk_buff: socket buffer with received data + * @adapter: board private structure + * @status_err: receive descriptor status and error fields + * @csum: receive descriptor csum field + * @sk_buff: socket buffer with received data **/ static inline void e1000_rx_checksum(struct e1000_adapter *adapter, - struct e1000_rx_desc *rx_desc, - struct sk_buff *skb) + uint32_t status_err, uint32_t csum, + struct sk_buff *skb) { + uint16_t status = (uint16_t)status_err; + uint8_t errors = (uint8_t)(status_err >> 24); + skb->ip_summed = CHECKSUM_NONE; + /* 82543 or newer only */ - if(unlikely((adapter->hw.mac_type < e1000_82543) || + if(unlikely(adapter->hw.mac_type < e1000_82543)) return; /* Ignore Checksum bit is set */ - (rx_desc->status & E1000_RXD_STAT_IXSM) || - /* TCP Checksum has not been calculated */ - (!(rx_desc->status & E1000_RXD_STAT_TCPCS)))) { - skb->ip_summed = CHECKSUM_NONE; - return; - } - - /* At this point we know the hardware did the TCP checksum */ - /* now look at the TCP checksum error bit */ - if(rx_desc->errors & E1000_RXD_ERR_TCPE) { + if(unlikely(status & E1000_RXD_STAT_IXSM)) return; + /* TCP/UDP checksum error bit is set */ + if(unlikely(errors & E1000_RXD_ERR_TCPE)) { /* let the stack verify checksum errors */ - skb->ip_summed = CHECKSUM_NONE; adapter->hw_csum_err++; + return; + } + /* TCP/UDP Checksum has not been calculated */ + if(adapter->hw.mac_type <= e1000_82547_rev_2) { + if(!(status & E1000_RXD_STAT_TCPCS)) + return; } else { + if(!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))) + return; + } + /* It must be a TCP or UDP packet with a valid checksum */ + if (likely(status & E1000_RXD_STAT_TCPCS)) { /* TCP checksum is good */ skb->ip_summed = CHECKSUM_UNNECESSARY; - adapter->hw_csum_good++; + } else if (adapter->hw.mac_type > e1000_82547_rev_2) { + /* IP fragment with UDP payload */ + /* Hardware complements the payload checksum, so we undo it + * and then put the value in host order for further stack use. + */ + csum = ntohl(csum ^ 0xFFFF); + skb->csum = csum; + skb->ip_summed = CHECKSUM_HW; } + adapter->hw_csum_good++; } /** - * e1000_clean_rx_irq - Send received data up the network stack + * e1000_clean_rx_irq - Send received data up the network stack; legacy * @adapter: board private structure **/ @@ -2513,7 +2901,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter) if(unlikely(!(rx_desc->status & E1000_RXD_STAT_EOP))) { /* All receives must fit into a single buffer */ E1000_DBG("%s: Receive packet consumed multiple" - " buffers\n", netdev->name); + " buffers\n", netdev->name); dev_kfree_skb_irq(skb); goto next_desc; } @@ -2539,15 +2927,17 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter) skb_put(skb, length - ETHERNET_FCS_SIZE); /* Receive Checksum Offload */ - e1000_rx_checksum(adapter, rx_desc, skb); - + e1000_rx_checksum(adapter, + (uint32_t)(rx_desc->status) | + ((uint32_t)(rx_desc->errors) << 24), + rx_desc->csum, skb); skb->protocol = eth_type_trans(skb, netdev); #ifdef CONFIG_E1000_NAPI if(unlikely(adapter->vlgrp && (rx_desc->status & E1000_RXD_STAT_VP))) { vlan_hwaccel_receive_skb(skb, adapter->vlgrp, - le16_to_cpu(rx_desc->special) & - E1000_RXD_SPC_VLAN_MASK); + le16_to_cpu(rx_desc->special) & + E1000_RXD_SPC_VLAN_MASK); } else { netif_receive_skb(skb); } @@ -2570,16 +2960,142 @@ next_desc: rx_desc = E1000_RX_DESC(*rx_ring, i); } - rx_ring->next_to_clean = i; + adapter->alloc_rx_buf(adapter); + + return cleaned; +} + +/** + * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split + * @adapter: board private structure + **/ + +static boolean_t +#ifdef CONFIG_E1000_NAPI +e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, int *work_done, + int work_to_do) +#else +e1000_clean_rx_irq_ps(struct e1000_adapter *adapter) +#endif +{ + struct e1000_desc_ring *rx_ring = &adapter->rx_ring; + union e1000_rx_desc_packet_split *rx_desc; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + struct e1000_buffer *buffer_info; + struct e1000_ps_page *ps_page; + struct e1000_ps_page_dma *ps_page_dma; + struct sk_buff *skb; + unsigned int i, j; + uint32_t length, staterr; + boolean_t cleaned = FALSE; + + i = rx_ring->next_to_clean; + rx_desc = E1000_RX_DESC_PS(*rx_ring, i); + staterr = rx_desc->wb.middle.status_error; + + while(staterr & E1000_RXD_STAT_DD) { + buffer_info = &rx_ring->buffer_info[i]; + ps_page = &rx_ring->ps_page[i]; + ps_page_dma = &rx_ring->ps_page_dma[i]; +#ifdef CONFIG_E1000_NAPI + if(unlikely(*work_done >= work_to_do)) + break; + (*work_done)++; +#endif + cleaned = TRUE; + pci_unmap_single(pdev, buffer_info->dma, + buffer_info->length, + PCI_DMA_FROMDEVICE); + + skb = buffer_info->skb; + + if(unlikely(!(staterr & E1000_RXD_STAT_EOP))) { + E1000_DBG("%s: Packet Split buffers didn't pick up" + " the full packet\n", netdev->name); + dev_kfree_skb_irq(skb); + goto next_desc; + } + + if(unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) { + dev_kfree_skb_irq(skb); + goto next_desc; + } + + length = le16_to_cpu(rx_desc->wb.middle.length0); + + if(unlikely(!length)) { + E1000_DBG("%s: Last part of the packet spanning" + " multiple descriptors\n", netdev->name); + dev_kfree_skb_irq(skb); + goto next_desc; + } + + /* Good Receive */ + skb_put(skb, length); + + for(j = 0; j < PS_PAGE_BUFFERS; j++) { + if(!(length = le16_to_cpu(rx_desc->wb.upper.length[j]))) + break; + + pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j], + PAGE_SIZE, PCI_DMA_FROMDEVICE); + ps_page_dma->ps_page_dma[j] = 0; + skb_shinfo(skb)->frags[j].page = + ps_page->ps_page[j]; + ps_page->ps_page[j] = NULL; + skb_shinfo(skb)->frags[j].page_offset = 0; + skb_shinfo(skb)->frags[j].size = length; + skb_shinfo(skb)->nr_frags++; + skb->len += length; + skb->data_len += length; + } - e1000_alloc_rx_buffers(adapter); + e1000_rx_checksum(adapter, staterr, + rx_desc->wb.lower.hi_dword.csum_ip.csum, skb); + skb->protocol = eth_type_trans(skb, netdev); + +#ifdef HAVE_RX_ZERO_COPY + if(likely(rx_desc->wb.upper.header_status & + E1000_RXDPS_HDRSTAT_HDRSP)) + skb_shinfo(skb)->zero_copy = TRUE; +#endif +#ifdef CONFIG_E1000_NAPI + if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) { + vlan_hwaccel_receive_skb(skb, adapter->vlgrp, + le16_to_cpu(rx_desc->wb.middle.vlan & + E1000_RXD_SPC_VLAN_MASK)); + } else { + netif_receive_skb(skb); + } +#else /* CONFIG_E1000_NAPI */ + if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) { + vlan_hwaccel_rx(skb, adapter->vlgrp, + le16_to_cpu(rx_desc->wb.middle.vlan & + E1000_RXD_SPC_VLAN_MASK)); + } else { + netif_rx(skb); + } +#endif /* CONFIG_E1000_NAPI */ + netdev->last_rx = jiffies; + +next_desc: + rx_desc->wb.middle.status_error &= ~0xFF; + buffer_info->skb = NULL; + if(unlikely(++i == rx_ring->count)) i = 0; + + rx_desc = E1000_RX_DESC_PS(*rx_ring, i); + staterr = rx_desc->wb.middle.status_error; + } + rx_ring->next_to_clean = i; + adapter->alloc_rx_buf(adapter); return cleaned; } /** - * e1000_alloc_rx_buffers - Replace used receive buffers + * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended * @adapter: address of board private structure **/ @@ -2592,43 +3108,43 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) struct e1000_rx_desc *rx_desc; struct e1000_buffer *buffer_info; struct sk_buff *skb; - unsigned int i, bufsz; + unsigned int i; + unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN; i = rx_ring->next_to_use; buffer_info = &rx_ring->buffer_info[i]; while(!buffer_info->skb) { - bufsz = adapter->rx_buffer_len + NET_IP_ALIGN; - skb = dev_alloc_skb(bufsz); + if(unlikely(!skb)) { /* Better luck next round */ break; } - /* fix for errata 23, cant cross 64kB boundary */ + /* Fix for errata 23, can't cross 64kB boundary */ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) { struct sk_buff *oldskb = skb; - DPRINTK(RX_ERR,ERR, - "skb align check failed: %u bytes at %p\n", - bufsz, skb->data); - /* try again, without freeing the previous */ + DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes " + "at %p\n", bufsz, skb->data); + /* Try again, without freeing the previous */ skb = dev_alloc_skb(bufsz); + /* Failed allocation, critical failure */ if (!skb) { dev_kfree_skb(oldskb); break; } + if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) { /* give up */ dev_kfree_skb(skb); dev_kfree_skb(oldskb); break; /* while !buffer_info->skb */ } else { - /* move on with the new one */ + /* Use new allocation */ dev_kfree_skb(oldskb); } } - /* Make buffer alignment 2 beyond a 16 byte boundary * this will result in a 16 byte aligned IP header after * the 14 byte MAC header is removed @@ -2644,25 +3160,23 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) adapter->rx_buffer_len, PCI_DMA_FROMDEVICE); - /* fix for errata 23, cant cross 64kB boundary */ - if(!e1000_check_64k_bound(adapter, - (void *)(unsigned long)buffer_info->dma, - adapter->rx_buffer_len)) { - DPRINTK(RX_ERR,ERR, - "dma align check failed: %u bytes at %ld\n", - adapter->rx_buffer_len, (unsigned long)buffer_info->dma); - + /* Fix for errata 23, can't cross 64kB boundary */ + if (!e1000_check_64k_bound(adapter, + (void *)(unsigned long)buffer_info->dma, + adapter->rx_buffer_len)) { + DPRINTK(RX_ERR, ERR, + "dma align check failed: %u bytes at %p\n", + adapter->rx_buffer_len, + (void *)(unsigned long)buffer_info->dma); dev_kfree_skb(skb); buffer_info->skb = NULL; - pci_unmap_single(pdev, - buffer_info->dma, + pci_unmap_single(pdev, buffer_info->dma, adapter->rx_buffer_len, PCI_DMA_FROMDEVICE); break; /* while !buffer_info->skb */ } - rx_desc = E1000_RX_DESC(*rx_ring, i); rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); @@ -2672,7 +3186,6 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) * applicable for weak-ordered memory model archs, * such as IA-64). */ wmb(); - E1000_WRITE_REG(&adapter->hw, RDT, i); } @@ -2684,6 +3197,95 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) } /** + * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split + * @adapter: address of board private structure + **/ + +static void +e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter) +{ + struct e1000_desc_ring *rx_ring = &adapter->rx_ring; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + union e1000_rx_desc_packet_split *rx_desc; + struct e1000_buffer *buffer_info; + struct e1000_ps_page *ps_page; + struct e1000_ps_page_dma *ps_page_dma; + struct sk_buff *skb; + unsigned int i, j; + + i = rx_ring->next_to_use; + buffer_info = &rx_ring->buffer_info[i]; + ps_page = &rx_ring->ps_page[i]; + ps_page_dma = &rx_ring->ps_page_dma[i]; + + while(!buffer_info->skb) { + rx_desc = E1000_RX_DESC_PS(*rx_ring, i); + + for(j = 0; j < PS_PAGE_BUFFERS; j++) { + if(unlikely(!ps_page->ps_page[j])) { + ps_page->ps_page[j] = + alloc_page(GFP_ATOMIC); + if(unlikely(!ps_page->ps_page[j])) + goto no_buffers; + ps_page_dma->ps_page_dma[j] = + pci_map_page(pdev, + ps_page->ps_page[j], + 0, PAGE_SIZE, + PCI_DMA_FROMDEVICE); + } + /* Refresh the desc even if buffer_addrs didn't + * change because each write-back erases this info. + */ + rx_desc->read.buffer_addr[j+1] = + cpu_to_le64(ps_page_dma->ps_page_dma[j]); + } + + skb = dev_alloc_skb(adapter->rx_ps_bsize0 + NET_IP_ALIGN); + + if(unlikely(!skb)) + break; + + /* Make buffer alignment 2 beyond a 16 byte boundary + * this will result in a 16 byte aligned IP header after + * the 14 byte MAC header is removed + */ + skb_reserve(skb, NET_IP_ALIGN); + + skb->dev = netdev; + + buffer_info->skb = skb; + buffer_info->length = adapter->rx_ps_bsize0; + buffer_info->dma = pci_map_single(pdev, skb->data, + adapter->rx_ps_bsize0, + PCI_DMA_FROMDEVICE); + + rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma); + + if(unlikely((i & ~(E1000_RX_BUFFER_WRITE - 1)) == i)) { + /* Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). */ + wmb(); + /* Hardware increments by 16 bytes, but packet split + * descriptors are 32 bytes...so we increment tail + * twice as much. + */ + E1000_WRITE_REG(&adapter->hw, RDT, i<<1); + } + + if(unlikely(++i == rx_ring->count)) i = 0; + buffer_info = &rx_ring->buffer_info[i]; + ps_page = &rx_ring->ps_page[i]; + ps_page_dma = &rx_ring->ps_page_dma[i]; + } + +no_buffers: + rx_ring->next_to_use = i; +} + +/** * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers. * @adapter: **/ @@ -2856,9 +3458,10 @@ void e1000_pci_set_mwi(struct e1000_hw *hw) { struct e1000_adapter *adapter = hw->back; + int ret_val = pci_set_mwi(adapter->pdev); - int ret; - ret = pci_set_mwi(adapter->pdev); + if(ret_val) + DPRINTK(PROBE, ERR, "Error in setting MWI\n"); } void @@ -2917,6 +3520,7 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) rctl |= E1000_RCTL_VFE; rctl &= ~E1000_RCTL_CFIEN; E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + e1000_update_mng_vlan(adapter); } else { /* disable VLAN tag insert/strip */ ctrl = E1000_READ_REG(&adapter->hw, CTRL); @@ -2927,6 +3531,10 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) rctl = E1000_READ_REG(&adapter->hw, RCTL); rctl &= ~E1000_RCTL_VFE; E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + if(adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) { + e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; + } } e1000_irq_enable(adapter); @@ -2937,7 +3545,10 @@ e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid) { struct e1000_adapter *adapter = netdev->priv; uint32_t vfta, index; - + if((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && + (vid == adapter->mng_vlan_id)) + return; /* add VID to filter table */ index = (vid >> 5) & 0x7F; vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index); @@ -2958,6 +3569,10 @@ e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid) e1000_irq_enable(adapter); + if((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && + (vid == adapter->mng_vlan_id)) + return; /* remove VID from filter table */ index = (vid >> 5) & 0x7F; vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index); @@ -3004,8 +3619,7 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx) break; case SPEED_1000 + DUPLEX_HALF: /* not supported */ default: - DPRINTK(PROBE, ERR, - "Unsupported Speed/Duplexity configuration\n"); + DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n"); return -EINVAL; } return 0; @@ -3033,7 +3647,7 @@ e1000_suspend(struct pci_dev *pdev, uint32_t state) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev->priv; - uint32_t ctrl, ctrl_ext, rctl, manc, status; + uint32_t ctrl, ctrl_ext, rctl, manc, status, swsm; uint32_t wufc = adapter->wol; netif_device_detach(netdev); @@ -3075,6 +3689,9 @@ e1000_suspend(struct pci_dev *pdev, uint32_t state) E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext); } + /* Allow time for pending master requests to run */ + e1000_disable_pciex_master(&adapter->hw); + E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN); E1000_WRITE_REG(&adapter->hw, WUFC, wufc); pci_enable_wake(pdev, 3, 1); @@ -3099,6 +3716,16 @@ e1000_suspend(struct pci_dev *pdev, uint32_t state) } } + switch(adapter->hw.mac_type) { + case e1000_82573: + swsm = E1000_READ_REG(&adapter->hw, SWSM); + E1000_WRITE_REG(&adapter->hw, SWSM, + swsm & ~E1000_SWSM_DRV_LOAD); + break; + default: + break; + } + pci_disable_device(pdev); state = (state > 0) ? 3 : 0; @@ -3113,13 +3740,12 @@ e1000_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev->priv; - uint32_t manc, ret; + uint32_t manc, ret, swsm; pci_set_power_state(pdev, 0); pci_restore_state(pdev); ret = pci_enable_device(pdev); - if (pdev->is_busmaster) - pci_set_master(pdev); + pci_set_master(pdev); pci_enable_wake(pdev, 3, 0); pci_enable_wake(pdev, 4, 0); /* 4 == D3 cold */ @@ -3139,10 +3765,19 @@ e1000_resume(struct pci_dev *pdev) E1000_WRITE_REG(&adapter->hw, MANC, manc); } + switch(adapter->hw.mac_type) { + case e1000_82573: + swsm = E1000_READ_REG(&adapter->hw, SWSM); + E1000_WRITE_REG(&adapter->hw, SWSM, + swsm | E1000_SWSM_DRV_LOAD); + break; + default: + break; + } + return 0; } #endif - #ifdef CONFIG_NET_POLL_CONTROLLER /* * Polling 'interrupt' - used by things like netconsole to send skbs @@ -3150,7 +3785,7 @@ e1000_resume(struct pci_dev *pdev) * the interrupt routine is executing. */ static void -e1000_netpoll (struct net_device *netdev) +e1000_netpoll(struct net_device *netdev) { struct e1000_adapter *adapter = netdev->priv; disable_irq(adapter->pdev->irq); diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h index 970c656a517..aac64de6143 100644 --- a/drivers/net/e1000/e1000_osdep.h +++ b/drivers/net/e1000/e1000_osdep.h @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -42,7 +42,12 @@ #include <linux/sched.h> #ifndef msec_delay -#define msec_delay(x) msleep(x) +#define msec_delay(x) do { if(in_interrupt()) { \ + /* Don't mdelay in interrupt context! */ \ + BUG(); \ + } else { \ + msleep(x); \ + } } while(0) /* Some workarounds require millisecond delays and are run during interrupt * context. Most notably, when establishing link, the phy may need tweaking @@ -96,6 +101,29 @@ typedef enum { (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \ ((offset) << 2))) +#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY +#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY + +#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \ + writew((value), ((a)->hw_addr + \ + (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \ + ((offset) << 1)))) + +#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \ + readw((a)->hw_addr + \ + (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \ + ((offset) << 1))) + +#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \ + writeb((value), ((a)->hw_addr + \ + (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \ + (offset)))) + +#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \ + readb((a)->hw_addr + \ + (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \ + (offset))) + #define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, STATUS) #endif /* _E1000_OSDEP_H_ */ diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index e914d09fe6f..676247f9f1c 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -478,7 +478,6 @@ e1000_check_options(struct e1000_adapter *adapter) DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", opt.name); break; - case -1: default: e1000_validate_option(&adapter->itr, &opt, adapter); diff --git a/drivers/net/fmv18x.c b/drivers/net/fmv18x.c deleted file mode 100644 index 04c74852347..00000000000 --- a/drivers/net/fmv18x.c +++ /dev/null @@ -1,689 +0,0 @@ -/* fmv18x.c: A network device driver for the Fujitsu FMV-181/182/183/184. - - Original: at1700.c (1993-94 by Donald Becker). - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - Modified by Yutaka TAMIYA (tamy@flab.fujitsu.co.jp) - Copyright 1994 Fujitsu Laboratories Ltd. - Special thanks to: - Masayoshi UTAKA (utaka@ace.yk.fujitsu.co.jp) - for testing this driver. - H. NEGISHI (agy, negishi@sun45.psd.cs.fujitsu.co.jp) - for suggestion of some program modification. - Masahiro SEKIGUCHI <seki@sysrap.cs.fujitsu.co.jp> - for suggestion of some program modification. - Kazutoshi MORIOKA (morioka@aurora.oaks.cs.fujitsu.co.jp) - for testing this driver. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - This is a device driver for the Fujitsu FMV-181/182/183/184, which - is a straight-forward Fujitsu MB86965 implementation. - - Sources: - at1700.c - The Fujitsu MB86965 datasheet. - The Fujitsu FMV-181/182 user's guide -*/ - -static const char version[] = - "fmv18x.c:v2.2.0 09/24/98 Yutaka TAMIYA (tamy@flab.fujitsu.co.jp)\n"; - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/in.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/spinlock.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/delay.h> -#include <linux/bitops.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/dma.h> - -#define DRV_NAME "fmv18x" - -static unsigned fmv18x_probe_list[] __initdata = { - 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x300, 0x340, 0 -}; - -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef NET_DEBUG -#define NET_DEBUG 1 -#endif -static unsigned int net_debug = NET_DEBUG; - -typedef unsigned char uchar; - -/* Information that need to be kept for each board. */ -struct net_local { - struct net_device_stats stats; - long open_time; /* Useless example local info. */ - uint tx_started:1; /* Number of packet on the Tx queue. */ - uint tx_queue_ready:1; /* Tx queue is ready to be sent. */ - uint rx_started:1; /* Packets are Rxing. */ - uchar tx_queue; /* Number of packet on the Tx queue. */ - ushort tx_queue_len; /* Current length of the Tx queue. */ - spinlock_t lock; -}; - - -/* Offsets from the base address. */ -#define STATUS 0 -#define TX_STATUS 0 -#define RX_STATUS 1 -#define TX_INTR 2 /* Bit-mapped interrupt enable registers. */ -#define RX_INTR 3 -#define TX_MODE 4 -#define RX_MODE 5 -#define CONFIG_0 6 /* Misc. configuration settings. */ -#define CONFIG_1 7 -/* Run-time register bank 2 definitions. */ -#define DATAPORT 8 /* Word-wide DMA or programmed-I/O dataport. */ -#define TX_START 10 -#define COL16CNTL 11 /* Controll Reg for 16 collisions */ -#define MODE13 13 -/* Fujitsu FMV-18x Card Configuration */ -#define FJ_STATUS0 0x10 -#define FJ_STATUS1 0x11 -#define FJ_CONFIG0 0x12 -#define FJ_CONFIG1 0x13 -#define FJ_MACADDR 0x14 /* 0x14 - 0x19 */ -#define FJ_BUFCNTL 0x1A -#define FJ_BUFDATA 0x1C -#define FMV18X_IO_EXTENT 32 - -/* Index to functions, as function prototypes. */ - -static int fmv18x_probe1(struct net_device *dev, short ioaddr); -static int net_open(struct net_device *dev); -static int net_send_packet(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs *regs); -static void net_rx(struct net_device *dev); -static void net_timeout(struct net_device *dev); -static int net_close(struct net_device *dev); -static struct net_device_stats *net_get_stats(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); - - -/* Check for a network adaptor of this type, and return '0' iff one exists. - If dev->base_addr == 0, probe all likely locations. - If dev->base_addr == 1, always return failure. - If dev->base_addr == 2, allocate space for the device and return success - (detachable devices only). - */ - -static int io = 0x220; -static int irq; - -struct net_device * __init fmv18x_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - unsigned *port; - int err = 0; - - if (!dev) - return ERR_PTR(-ENODEV); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - } - - SET_MODULE_OWNER(dev); - - if (io > 0x1ff) { /* Check a single specified location. */ - err = fmv18x_probe1(dev, io); - } else if (io != 0) { /* Don't probe at all. */ - err = -ENXIO; - } else { - for (port = fmv18x_probe_list; *port; port++) - if (fmv18x_probe1(dev, *port) == 0) - break; - if (!*port) - err = -ENODEV; - } - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - free_irq(dev->irq, dev); - release_region(dev->base_addr, FMV18X_IO_EXTENT); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -/* The Fujitsu datasheet suggests that the NIC be probed for by checking its - "signature", the default bit pattern after a reset. This *doesn't* work -- - there is no way to reset the bus interface without a complete power-cycle! - - It turns out that ATI came to the same conclusion I did: the only thing - that can be done is checking a few bits and then diving right into MAC - address check. */ - -static int __init fmv18x_probe1(struct net_device *dev, short ioaddr) -{ - char irqmap[4] = {3, 7, 10, 15}; - char irqmap_pnp[8] = {3, 4, 5, 7, 9, 10, 11, 15}; - unsigned int i, retval; - struct net_local *lp; - - /* Resetting the chip doesn't reset the ISA interface, so don't bother. - That means we have to be careful with the register values we probe for. - */ - - if (!request_region(ioaddr, FMV18X_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - dev->irq = irq; - dev->base_addr = ioaddr; - - /* Check I/O address configuration and Fujitsu vendor code */ - if (inb(ioaddr+FJ_MACADDR ) != 0x00 - || inb(ioaddr+FJ_MACADDR+1) != 0x00 - || inb(ioaddr+FJ_MACADDR+2) != 0x0e) { - retval = -ENODEV; - goto out; - } - - /* Check PnP mode for FMV-183/184/183A/184A. */ - /* This PnP routine is very poor. IO and IRQ should be known. */ - if (inb(ioaddr + FJ_STATUS1) & 0x20) { - for (i = 0; i < 8; i++) { - if (dev->irq == irqmap_pnp[i]) - break; - } - if (i == 8) { - retval = -ENODEV; - goto out; - } - } else { - if (fmv18x_probe_list[inb(ioaddr + FJ_CONFIG0) & 0x07] != ioaddr) - return -ENODEV; - dev->irq = irqmap[(inb(ioaddr + FJ_CONFIG0)>>6) & 0x03]; - } - - /* Snarf the interrupt vector now. */ - retval = request_irq(dev->irq, &net_interrupt, 0, DRV_NAME, dev); - if (retval) { - printk ("FMV-18x found at %#3x, but it's unusable due to a conflict on" - "IRQ %d.\n", ioaddr, dev->irq); - goto out; - } - - printk("%s: FMV-18x found at %#3x, IRQ %d, address ", dev->name, - ioaddr, dev->irq); - - for(i = 0; i < 6; i++) { - unsigned char val = inb(ioaddr + FJ_MACADDR + i); - printk("%02x", val); - dev->dev_addr[i] = val; - } - - /* "FJ_STATUS0" 12 bit 0x0400 means use regular 100 ohm 10baseT signals, - rather than 150 ohm shielded twisted pair compensation. - 0x0000 == auto-sense the interface - 0x0800 == use TP interface - 0x1800 == use coax interface - */ - { - const char *porttype[] = {"auto-sense", "10baseT", "auto-sense", "10base2/5"}; - ushort setup_value = inb(ioaddr + FJ_STATUS0); - - switch( setup_value & 0x07 ){ - case 0x01 /* 10base5 */: - case 0x02 /* 10base2 */: dev->if_port = 0x18; break; - case 0x04 /* 10baseT */: dev->if_port = 0x08; break; - default /* auto-sense*/: dev->if_port = 0x00; break; - } - printk(" %s interface.\n", porttype[(dev->if_port>>3) & 3]); - } - - /* Initialize LAN Controller and LAN Card */ - outb(0xda, ioaddr + CONFIG_0); /* Initialize LAN Controller */ - outb(0x00, ioaddr + CONFIG_1); /* Stand by mode */ - outb(0x00, ioaddr + FJ_CONFIG1); /* Disable IRQ of LAN Card */ - outb(0x00, ioaddr + FJ_BUFCNTL); /* Reset ? I'm not sure (TAMIYA) */ - - /* wait for a while */ - udelay(200); - - /* Set the station address in bank zero. */ - outb(0x00, ioaddr + CONFIG_1); - for (i = 0; i < 6; i++) - outb(dev->dev_addr[i], ioaddr + 8 + i); - - /* Switch to bank 1 and set the multicast table to accept none. */ - outb(0x04, ioaddr + CONFIG_1); - for (i = 0; i < 8; i++) - outb(0x00, ioaddr + 8 + i); - - /* Switch to bank 2 and lock our I/O address. */ - outb(0x08, ioaddr + CONFIG_1); - outb(dev->if_port, ioaddr + MODE13); - outb(0x00, ioaddr + COL16CNTL); - - if (net_debug) - printk(version); - - /* Initialize the device structure. */ - dev->priv = kmalloc(sizeof(struct net_local), GFP_KERNEL); - if (!dev->priv) { - retval = -ENOMEM; - goto out_irq; - } - memset(dev->priv, 0, sizeof(struct net_local)); - lp = dev->priv; - spin_lock_init(&lp->lock); - - dev->open = net_open; - dev->stop = net_close; - dev->hard_start_xmit = net_send_packet; - dev->tx_timeout = net_timeout; - dev->watchdog_timeo = HZ/10; - dev->get_stats = net_get_stats; - dev->set_multicast_list = set_multicast_list; - return 0; - -out_irq: - free_irq(dev->irq, dev); -out: - release_region(ioaddr, FMV18X_IO_EXTENT); - return retval; -} - - -static int net_open(struct net_device *dev) -{ - struct net_local *lp = dev->priv; - int ioaddr = dev->base_addr; - - /* Set the configuration register 0 to 32K 100ns. byte-wide memory, - 16 bit bus access, and two 4K Tx, enable the Rx and Tx. */ - outb(0x5a, ioaddr + CONFIG_0); - - /* Powerup and switch to register bank 2 for the run-time registers. */ - outb(0xe8, ioaddr + CONFIG_1); - - lp->tx_started = 0; - lp->tx_queue_ready = 1; - lp->rx_started = 0; - lp->tx_queue = 0; - lp->tx_queue_len = 0; - - /* Clear Tx and Rx Status */ - outb(0xff, ioaddr + TX_STATUS); - outb(0xff, ioaddr + RX_STATUS); - lp->open_time = jiffies; - - netif_start_queue(dev); - - /* Enable the IRQ of the LAN Card */ - outb(0x80, ioaddr + FJ_CONFIG1); - - /* Enable both Tx and Rx interrupts */ - outw(0x8182, ioaddr+TX_INTR); - - return 0; -} - -static void net_timeout(struct net_device *dev) -{ - struct net_local *lp = dev->priv; - int ioaddr = dev->base_addr; - unsigned long flags; - - - printk(KERN_WARNING "%s: transmit timed out with status %04x, %s?\n", dev->name, - htons(inw(ioaddr + TX_STATUS)), - inb(ioaddr + TX_STATUS) & 0x80 - ? "IRQ conflict" : "network cable problem"); - printk(KERN_WARNING "%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n", - dev->name, htons(inw(ioaddr + 0)), - htons(inw(ioaddr + 2)), htons(inw(ioaddr + 4)), - htons(inw(ioaddr + 6)), htons(inw(ioaddr + 8)), - htons(inw(ioaddr +10)), htons(inw(ioaddr +12)), - htons(inw(ioaddr +14))); - printk(KERN_WARNING "eth card: %04x %04x\n", - htons(inw(ioaddr+FJ_STATUS0)), - htons(inw(ioaddr+FJ_CONFIG0))); - lp->stats.tx_errors++; - /* ToDo: We should try to restart the adaptor... */ - spin_lock_irqsave(&lp->lock, flags); - - /* Initialize LAN Controller and LAN Card */ - outb(0xda, ioaddr + CONFIG_0); /* Initialize LAN Controller */ - outb(0x00, ioaddr + CONFIG_1); /* Stand by mode */ - outb(0x00, ioaddr + FJ_CONFIG1); /* Disable IRQ of LAN Card */ - outb(0x00, ioaddr + FJ_BUFCNTL); /* Reset ? I'm not sure */ - net_open(dev); - spin_unlock_irqrestore(&lp->lock, flags); - - netif_wake_queue(dev); -} - -static int net_send_packet(struct sk_buff *skb, struct net_device *dev) -{ - struct net_local *lp = dev->priv; - int ioaddr = dev->base_addr; - short length = skb->len; - unsigned char *buf; - unsigned long flags; - - /* Block a transmit from overlapping. */ - - if (length > ETH_FRAME_LEN) { - if (net_debug) - printk("%s: Attempting to send a large packet (%d bytes).\n", - dev->name, length); - return 1; - } - - if (length < ETH_ZLEN) { - skb = skb_padto(skb, ETH_ZLEN); - if (skb == NULL) - return 0; - length = ETH_ZLEN; - } - buf = skb->data; - - if (net_debug > 4) - printk("%s: Transmitting a packet of length %lu.\n", dev->name, - (unsigned long)skb->len); - /* We may not start transmitting unless we finish transferring - a packet into the Tx queue. During executing the following - codes we possibly catch a Tx interrupt. Thus we flag off - tx_queue_ready, so that we prevent the interrupt routine - (net_interrupt) to start transmitting. */ - spin_lock_irqsave(&lp->lock, flags); - lp->tx_queue_ready = 0; - { - outw(length, ioaddr + DATAPORT); - outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1); - lp->tx_queue++; - lp->tx_queue_len += length + 2; - } - lp->tx_queue_ready = 1; - spin_unlock_irqrestore(&lp->lock, flags); - - if (lp->tx_started == 0) { - /* If the Tx is idle, always trigger a transmit. */ - outb(0x80 | lp->tx_queue, ioaddr + TX_START); - lp->tx_queue = 0; - lp->tx_queue_len = 0; - dev->trans_start = jiffies; - lp->tx_started = 1; - } else if (lp->tx_queue_len >= 4096 - 1502) /* No room for a packet */ - netif_stop_queue(dev); - - dev_kfree_skb(skb); - return 0; -} - -/* The typical workload of the driver: - Handle the network interface interrupts. */ -static irqreturn_t -net_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - struct net_device *dev = dev_id; - struct net_local *lp; - int ioaddr, status; - - ioaddr = dev->base_addr; - lp = dev->priv; - status = inw(ioaddr + TX_STATUS); - outw(status, ioaddr + TX_STATUS); - - if (net_debug > 4) - printk("%s: Interrupt with status %04x.\n", dev->name, status); - if (lp->rx_started == 0 && - (status & 0xff00 || (inb(ioaddr + RX_MODE) & 0x40) == 0)) { - /* Got a packet(s). - We cannot execute net_rx more than once at the same time for - the same device. During executing net_rx, we possibly catch a - Tx interrupt. Thus we flag on rx_started, so that we prevent - the interrupt routine (net_interrupt) to dive into net_rx - again. */ - lp->rx_started = 1; - outb(0x00, ioaddr + RX_INTR); /* Disable RX intr. */ - net_rx(dev); - outb(0x81, ioaddr + RX_INTR); /* Enable RX intr. */ - lp->rx_started = 0; - } - if (status & 0x00ff) { - if (status & 0x02) { - /* More than 16 collisions occurred */ - if (net_debug > 4) - printk("%s: 16 Collision occur during Txing.\n", dev->name); - /* Cancel sending a packet. */ - outb(0x03, ioaddr + COL16CNTL); - lp->stats.collisions++; - } - if (status & 0x82) { - spin_lock(&lp->lock); - lp->stats.tx_packets++; - if (lp->tx_queue && lp->tx_queue_ready) { - outb(0x80 | lp->tx_queue, ioaddr + TX_START); - lp->tx_queue = 0; - lp->tx_queue_len = 0; - dev->trans_start = jiffies; - netif_wake_queue(dev); /* Inform upper layers. */ - } else { - lp->tx_started = 0; - netif_wake_queue(dev); /* Inform upper layers. */ - } - spin_unlock(&lp->lock); - } - } - return IRQ_RETVAL(status); -} - -/* We have a good packet(s), get it/them out of the buffers. */ -static void net_rx(struct net_device *dev) -{ - struct net_local *lp = dev->priv; - int ioaddr = dev->base_addr; - int boguscount = 5; - - while ((inb(ioaddr + RX_MODE) & 0x40) == 0) { - /* Clear PKT_RDY bit: by agy 19940922 */ - /* outb(0x80, ioaddr + RX_STATUS); */ - ushort status = inw(ioaddr + DATAPORT); - - if (net_debug > 4) - printk("%s: Rxing packet mode %02x status %04x.\n", - dev->name, inb(ioaddr + RX_MODE), status); -#ifndef final_version - if (status == 0) { - outb(0x05, ioaddr + 14); - break; - } -#endif - - if ((status & 0xF0) != 0x20) { /* There was an error. */ - lp->stats.rx_errors++; - if (status & 0x08) lp->stats.rx_length_errors++; - if (status & 0x04) lp->stats.rx_frame_errors++; - if (status & 0x02) lp->stats.rx_crc_errors++; - if (status & 0x01) lp->stats.rx_over_errors++; - } else { - ushort pkt_len = inw(ioaddr + DATAPORT); - /* Malloc up new buffer. */ - struct sk_buff *skb; - - if (pkt_len > 1550) { - printk("%s: The FMV-18x claimed a very large packet, size %d.\n", - dev->name, pkt_len); - outb(0x05, ioaddr + 14); - lp->stats.rx_errors++; - break; - } - skb = dev_alloc_skb(pkt_len+3); - if (skb == NULL) { - printk("%s: Memory squeeze, dropping packet (len %d).\n", - dev->name, pkt_len); - outb(0x05, ioaddr + 14); - lp->stats.rx_dropped++; - break; - } - skb->dev = dev; - skb_reserve(skb,2); - - insw(ioaddr + DATAPORT, skb_put(skb,pkt_len), (pkt_len + 1) >> 1); - - if (net_debug > 5) { - int i; - printk("%s: Rxed packet of length %d: ", dev->name, pkt_len); - for (i = 0; i < 14; i++) - printk(" %02x", skb->data[i]); - printk(".\n"); - } - - skb->protocol=eth_type_trans(skb, dev); - netif_rx(skb); - dev->last_rx = jiffies; - lp->stats.rx_packets++; - lp->stats.rx_bytes += pkt_len; - } - if (--boguscount <= 0) - break; - } - - /* If any worth-while packets have been received, dev_rint() - has done a mark_bh(NET_BH) for us and will work on them - when we get to the bottom-half routine. */ - { - int i; - for (i = 0; i < 20; i++) { - if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40) - break; - (void)inw(ioaddr + DATAPORT); /* dummy status read */ - outb(0x05, ioaddr + 14); - } - - if (net_debug > 5 && i > 0) - printk("%s: Exint Rx packet with mode %02x after %d ticks.\n", - dev->name, inb(ioaddr + RX_MODE), i); - } - - return; -} - -/* The inverse routine to net_open(). */ -static int net_close(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - ((struct net_local *)dev->priv)->open_time = 0; - - netif_stop_queue(dev); - - /* Set configuration register 0 to disable Tx and Rx. */ - outb(0xda, ioaddr + CONFIG_0); - - /* Update the statistics -- ToDo. */ - - /* Power-down the chip. Green, green, green! */ - outb(0x00, ioaddr + CONFIG_1); - - /* Set the ethernet adaptor disable IRQ */ - outb(0x00, ioaddr + FJ_CONFIG1); - - return 0; -} - -/* Get the current statistics. This may be called with the card open or - closed. */ -static struct net_device_stats *net_get_stats(struct net_device *dev) -{ - struct net_local *lp = dev->priv; - return &lp->stats; -} - -/* Set or clear the multicast filter for this adaptor. - num_addrs == -1 Promiscuous mode, receive all packets - num_addrs == 0 Normal mode, clear multicast list - num_addrs > 0 Multicast mode, receive normal and MC packets, and do - best-effort filtering. - */ - -static void set_multicast_list(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - if (dev->mc_count || dev->flags&(IFF_PROMISC|IFF_ALLMULTI)) - { - /* - * We must make the kernel realise we had to move - * into promisc mode or we start all out war on - * the cable. - AC - */ - dev->flags|=IFF_PROMISC; - - outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */ - } - else - outb(2, ioaddr + RX_MODE); /* Disable promiscuous, use normal mode */ -} - -#ifdef MODULE -static struct net_device *dev_fmv18x; - -MODULE_PARM(io, "i"); -MODULE_PARM(irq, "i"); -MODULE_PARM(net_debug, "i"); -MODULE_PARM_DESC(io, "FMV-18X I/O address"); -MODULE_PARM_DESC(irq, "FMV-18X IRQ number"); -MODULE_PARM_DESC(net_debug, "FMV-18X debug level (0-1,5-6)"); -MODULE_LICENSE("GPL"); - -int init_module(void) -{ - if (io == 0) - printk("fmv18x: You should not use auto-probing with insmod!\n"); - dev_fmv18x = fmv18x_probe(-1); - if (IS_ERR(dev_fmv18x)) - return PTR_ERR(dev_fmv18x); - return 0; -} - -void -cleanup_module(void) -{ - unregister_netdev(dev_fmv18x); - free_irq(dev_fmv18x->irq, dev_fmv18x); - release_region(dev_fmv18x->base_addr, FMV18X_IO_EXTENT); - free_netdev(dev_fmv18x); -} -#endif /* MODULE */ - -/* - * Local variables: - * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c fmv18x.c" - * version-control: t - * kept-new-versions: 5 - * tab-width: 4 - * c-indent-level: 4 - * End: - */ diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index cda48c5d72a..4ebcd052e15 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -81,6 +81,7 @@ * cause DMA to kfree'd memory. * 0.31: 14 Nov 2004: ethtool support for getting/setting link * capabilities. + * 0.32: 16 Apr 2005: RX_ERROR4 handling added. * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -92,7 +93,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.31" +#define FORCEDETH_VERSION "0.32" #define DRV_NAME "forcedeth" #include <linux/module.h> @@ -109,6 +110,7 @@ #include <linux/mii.h> #include <linux/random.h> #include <linux/init.h> +#include <linux/if_vlan.h> #include <asm/irq.h> #include <asm/io.h> @@ -1013,6 +1015,59 @@ static void nv_tx_timeout(struct net_device *dev) spin_unlock_irq(&np->lock); } +/* + * Called when the nic notices a mismatch between the actual data len on the + * wire and the len indicated in the 802 header + */ +static int nv_getlen(struct net_device *dev, void *packet, int datalen) +{ + int hdrlen; /* length of the 802 header */ + int protolen; /* length as stored in the proto field */ + + /* 1) calculate len according to header */ + if ( ((struct vlan_ethhdr *)packet)->h_vlan_proto == __constant_htons(ETH_P_8021Q)) { + protolen = ntohs( ((struct vlan_ethhdr *)packet)->h_vlan_encapsulated_proto ); + hdrlen = VLAN_HLEN; + } else { + protolen = ntohs( ((struct ethhdr *)packet)->h_proto); + hdrlen = ETH_HLEN; + } + dprintk(KERN_DEBUG "%s: nv_getlen: datalen %d, protolen %d, hdrlen %d\n", + dev->name, datalen, protolen, hdrlen); + if (protolen > ETH_DATA_LEN) + return datalen; /* Value in proto field not a len, no checks possible */ + + protolen += hdrlen; + /* consistency checks: */ + if (datalen > ETH_ZLEN) { + if (datalen >= protolen) { + /* more data on wire than in 802 header, trim of + * additional data. + */ + dprintk(KERN_DEBUG "%s: nv_getlen: accepting %d bytes.\n", + dev->name, protolen); + return protolen; + } else { + /* less data on wire than mentioned in header. + * Discard the packet. + */ + dprintk(KERN_DEBUG "%s: nv_getlen: discarding long packet.\n", + dev->name); + return -1; + } + } else { + /* short packet. Accept only if 802 values are also short */ + if (protolen > ETH_ZLEN) { + dprintk(KERN_DEBUG "%s: nv_getlen: discarding short packet.\n", + dev->name); + return -1; + } + dprintk(KERN_DEBUG "%s: nv_getlen: accepting %d bytes.\n", + dev->name, datalen); + return datalen; + } +} + static void nv_rx_process(struct net_device *dev) { struct fe_priv *np = get_nvpriv(dev); @@ -1064,7 +1119,7 @@ static void nv_rx_process(struct net_device *dev) np->stats.rx_errors++; goto next_pkt; } - if (Flags & (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3|NV_RX_ERROR4)) { + if (Flags & (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3)) { np->stats.rx_errors++; goto next_pkt; } @@ -1078,22 +1133,24 @@ static void nv_rx_process(struct net_device *dev) np->stats.rx_errors++; goto next_pkt; } - if (Flags & NV_RX_ERROR) { - /* framing errors are soft errors, the rest is fatal. */ - if (Flags & NV_RX_FRAMINGERR) { - if (Flags & NV_RX_SUBSTRACT1) { - len--; - } - } else { + if (Flags & NV_RX_ERROR4) { + len = nv_getlen(dev, np->rx_skbuff[i]->data, len); + if (len < 0) { np->stats.rx_errors++; goto next_pkt; } } + /* framing errors are soft errors. */ + if (Flags & NV_RX_FRAMINGERR) { + if (Flags & NV_RX_SUBSTRACT1) { + len--; + } + } } else { if (!(Flags & NV_RX2_DESCRIPTORVALID)) goto next_pkt; - if (Flags & (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3|NV_RX2_ERROR4)) { + if (Flags & (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3)) { np->stats.rx_errors++; goto next_pkt; } @@ -1107,17 +1164,19 @@ static void nv_rx_process(struct net_device *dev) np->stats.rx_errors++; goto next_pkt; } - if (Flags & NV_RX2_ERROR) { - /* framing errors are soft errors, the rest is fatal. */ - if (Flags & NV_RX2_FRAMINGERR) { - if (Flags & NV_RX2_SUBSTRACT1) { - len--; - } - } else { + if (Flags & NV_RX2_ERROR4) { + len = nv_getlen(dev, np->rx_skbuff[i]->data, len); + if (len < 0) { np->stats.rx_errors++; goto next_pkt; } } + /* framing errors are soft errors */ + if (Flags & NV_RX2_FRAMINGERR) { + if (Flags & NV_RX2_SUBSTRACT1) { + len--; + } + } Flags &= NV_RX2_CHECKSUMMASK; if (Flags == NV_RX2_CHECKSUMOK1 || Flags == NV_RX2_CHECKSUMOK2 || @@ -1480,6 +1539,13 @@ static void nv_do_nic_poll(unsigned long data) enable_irq(dev->irq); } +#ifdef CONFIG_NET_POLL_CONTROLLER +static void nv_poll_controller(struct net_device *dev) +{ + nv_do_nic_poll((unsigned long) dev); +} +#endif + static void nv_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct fe_priv *np = get_nvpriv(dev); @@ -1962,6 +2028,9 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i dev->get_stats = nv_get_stats; dev->change_mtu = nv_change_mtu; dev->set_multicast_list = nv_set_multicast; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = nv_poll_controller; +#endif SET_ETHTOOL_OPS(dev, &ops); dev->tx_timeout = nv_tx_timeout; dev->watchdog_timeo = NV_WATCHDOG_TIMEO; diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index 1c563f905a5..a7f15d9f13e 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -374,29 +374,6 @@ static inline void do_kiss_params(struct baycom_state *bc, } /* --------------------------------------------------------------------- */ -/* - * high performance HDLC encoder - * yes, it's ugly, but generates pretty good code - */ - -#define ENCODEITERA(j) \ -({ \ - if (!(notbitstream & (0x1f0 << j))) \ - goto stuff##j; \ - encodeend##j: ; \ -}) - -#define ENCODEITERB(j) \ -({ \ - stuff##j: \ - bitstream &= ~(0x100 << j); \ - bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | \ - ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); \ - numbit++; \ - notbitstream = ~bitstream; \ - goto encodeend##j; \ -}) - static void encode_hdlc(struct baycom_state *bc) { @@ -405,6 +382,7 @@ static void encode_hdlc(struct baycom_state *bc) int pkt_len; unsigned bitstream, notbitstream, bitbuf, numbit, crc; unsigned char crcarr[2]; + int j; if (bc->hdlctx.bufcnt > 0) return; @@ -429,24 +407,14 @@ static void encode_hdlc(struct baycom_state *bc) pkt_len--; if (!pkt_len) bp = crcarr; - ENCODEITERA(0); - ENCODEITERA(1); - ENCODEITERA(2); - ENCODEITERA(3); - ENCODEITERA(4); - ENCODEITERA(5); - ENCODEITERA(6); - ENCODEITERA(7); - goto enditer; - ENCODEITERB(0); - ENCODEITERB(1); - ENCODEITERB(2); - ENCODEITERB(3); - ENCODEITERB(4); - ENCODEITERB(5); - ENCODEITERB(6); - ENCODEITERB(7); - enditer: + for (j = 0; j < 8; j++) + if (unlikely(!(notbitstream & (0x1f0 << j)))) { + bitstream &= ~(0x100 << j); + bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | + ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); + numbit++; + notbitstream = ~bitstream; + } numbit += 8; while (numbit >= 8) { *wp++ = bitbuf; @@ -610,37 +578,6 @@ static void do_rxpacket(struct net_device *dev) bc->stats.rx_packets++; } -#define DECODEITERA(j) \ -({ \ - if (!(notbitstream & (0x0fc << j))) /* flag or abort */ \ - goto flgabrt##j; \ - if ((bitstream & (0x1f8 << j)) == (0xf8 << j)) /* stuffed bit */ \ - goto stuff##j; \ - enditer##j: ; \ -}) - -#define DECODEITERB(j) \ -({ \ - flgabrt##j: \ - if (!(notbitstream & (0x1fc << j))) { /* abort received */ \ - state = 0; \ - goto enditer##j; \ - } \ - if ((bitstream & (0x1fe << j)) != (0x0fc << j)) /* flag received */ \ - goto enditer##j; \ - if (state) \ - do_rxpacket(dev); \ - bc->hdlcrx.bufcnt = 0; \ - bc->hdlcrx.bufptr = bc->hdlcrx.buf; \ - state = 1; \ - numbits = 7-j; \ - goto enditer##j; \ - stuff##j: \ - numbits--; \ - bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); \ - goto enditer##j; \ -}) - static int receive(struct net_device *dev, int cnt) { struct baycom_state *bc = netdev_priv(dev); @@ -649,6 +586,7 @@ static int receive(struct net_device *dev, int cnt) unsigned char tmp[128]; unsigned char *cp; int cnt2, ret = 0; + int j; numbits = bc->hdlcrx.numbits; state = bc->hdlcrx.state; @@ -669,24 +607,32 @@ static int receive(struct net_device *dev, int cnt) bitbuf |= (*cp) << 8; numbits += 8; notbitstream = ~bitstream; - DECODEITERA(0); - DECODEITERA(1); - DECODEITERA(2); - DECODEITERA(3); - DECODEITERA(4); - DECODEITERA(5); - DECODEITERA(6); - DECODEITERA(7); - goto enddec; - DECODEITERB(0); - DECODEITERB(1); - DECODEITERB(2); - DECODEITERB(3); - DECODEITERB(4); - DECODEITERB(5); - DECODEITERB(6); - DECODEITERB(7); - enddec: + for (j = 0; j < 8; j++) { + + /* flag or abort */ + if (unlikely(!(notbitstream & (0x0fc << j)))) { + + /* abort received */ + if (!(notbitstream & (0x1fc << j))) + state = 0; + + /* not flag received */ + else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) { + if (state) + do_rxpacket(dev); + bc->hdlcrx.bufcnt = 0; + bc->hdlcrx.bufptr = bc->hdlcrx.buf; + state = 1; + numbits = 7-j; + } + } + + /* stuffed bit */ + else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) { + numbits--; + bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); + } + } while (state && numbits >= 8) { if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) { state = 0; diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c index ab44358ddbf..6482d994d48 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ b/drivers/net/ibm_emac/ibm_emac_core.c @@ -1595,7 +1595,7 @@ static struct ethtool_ops emac_ethtool_ops = { static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct ocp_enet_private *fep = dev->priv; - uint *data = (uint *) & rq->ifr_ifru; + uint16_t *data = (uint16_t *) & rq->ifr_ifru; switch (cmd) { case SIOCGMIIPHY: diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index 855f8b2cf13..13ed8dc1e91 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -924,7 +924,7 @@ static int veth_transmit_to_one(struct sk_buff *skb, HvLpIndex rlp, spin_lock_irqsave(&cnx->lock, flags); - if (! cnx->state & VETH_STATE_READY) + if (! (cnx->state & VETH_STATE_READY)) goto drop; if ((skb->len - 14) > VETH_MAX_MTU) @@ -1023,6 +1023,8 @@ static int veth_start_xmit(struct sk_buff *skb, struct net_device *dev) lpmask = veth_transmit_to_many(skb, lpmask, dev); + dev->trans_start = jiffies; + if (! lpmask) { dev_kfree_skb(skb); } else { @@ -1262,13 +1264,18 @@ static void veth_receive(struct veth_lpar_connection *cnx, vlan = skb->data[9]; dev = veth_dev[vlan]; - if (! dev) - /* Some earlier versions of the driver sent - broadcasts down all connections, even to - lpars that weren't on the relevant vlan. - So ignore packets belonging to a vlan we're - not on. */ + if (! dev) { + /* + * Some earlier versions of the driver sent + * broadcasts down all connections, even to lpars + * that weren't on the relevant vlan. So ignore + * packets belonging to a vlan we're not on. + * We can also be here if we receive packets while + * the driver is going down, because then dev is NULL. + */ + dev_kfree_skb_irq(skb); continue; + } port = (struct veth_port *)dev->priv; dest = *((u64 *) skb->data) & 0xFFFFFFFFFFFF0000; @@ -1381,18 +1388,25 @@ void __exit veth_module_cleanup(void) { int i; - vio_unregister_driver(&veth_driver); + /* Stop the queues first to stop any new packets being sent. */ + for (i = 0; i < HVMAXARCHITECTEDVIRTUALLANS; i++) + if (veth_dev[i]) + netif_stop_queue(veth_dev[i]); + /* Stop the connections before we unregister the driver. This + * ensures there's no skbs lying around holding the device open. */ for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) veth_stop_connection(i); HvLpEvent_unregisterHandler(HvLpEvent_Type_VirtualLan); /* Hypervisor callbacks may have scheduled more work while we - * were destroying connections. Now that we've disconnected from + * were stoping connections. Now that we've disconnected from * the hypervisor make sure everything's finished. */ flush_scheduled_work(); + vio_unregister_driver(&veth_driver); + for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) veth_destroy_connection(i); diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h index 26c4f15f7fc..f8d3385c784 100644 --- a/drivers/net/ixgb/ixgb.h +++ b/drivers/net/ixgb/ixgb.h @@ -110,7 +110,7 @@ struct ixgb_adapter; #define IXGB_TX_QUEUE_WAKE 16 /* How many Rx Buffers do we bundle into one write to the hardware ? */ -#define IXGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */ +#define IXGB_RX_BUFFER_WRITE 4 /* Must be power of 2 */ /* only works for sizes that are powers of 2 */ #define IXGB_ROUNDUP(i, size) ((i) = (((i) + (size) - 1) & ~((size) - 1))) diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c index 653e99f919c..3aae110c556 100644 --- a/drivers/net/ixgb/ixgb_ee.c +++ b/drivers/net/ixgb/ixgb_ee.c @@ -411,7 +411,7 @@ ixgb_write_eeprom(struct ixgb_hw *hw, uint16_t offset, uint16_t data) ixgb_cleanup_eeprom(hw); /* clear the init_ctrl_reg_1 to signify that the cache is invalidated */ - ee_map->init_ctrl_reg_1 = EEPROM_ICW1_SIGNATURE_CLEAR; + ee_map->init_ctrl_reg_1 = le16_to_cpu(EEPROM_ICW1_SIGNATURE_CLEAR); return; } @@ -483,7 +483,7 @@ ixgb_get_eeprom_data(struct ixgb_hw *hw) DEBUGOUT("ixgb_ee: Checksum invalid.\n"); /* clear the init_ctrl_reg_1 to signify that the cache is * invalidated */ - ee_map->init_ctrl_reg_1 = EEPROM_ICW1_SIGNATURE_CLEAR; + ee_map->init_ctrl_reg_1 = le16_to_cpu(EEPROM_ICW1_SIGNATURE_CLEAR); return (FALSE); } @@ -579,7 +579,7 @@ ixgb_get_ee_compatibility(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->compatibility); + return (le16_to_cpu(ee_map->compatibility)); return(0); } @@ -616,7 +616,7 @@ ixgb_get_ee_init_ctrl_reg_1(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->init_ctrl_reg_1); + return (le16_to_cpu(ee_map->init_ctrl_reg_1)); return(0); } @@ -635,7 +635,7 @@ ixgb_get_ee_init_ctrl_reg_2(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->init_ctrl_reg_2); + return (le16_to_cpu(ee_map->init_ctrl_reg_2)); return(0); } @@ -654,7 +654,7 @@ ixgb_get_ee_subsystem_id(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->subsystem_id); + return (le16_to_cpu(ee_map->subsystem_id)); return(0); } @@ -673,7 +673,7 @@ ixgb_get_ee_subvendor_id(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->subvendor_id); + return (le16_to_cpu(ee_map->subvendor_id)); return(0); } @@ -692,7 +692,7 @@ ixgb_get_ee_device_id(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->device_id); + return (le16_to_cpu(ee_map->device_id)); return(0); } @@ -711,7 +711,7 @@ ixgb_get_ee_vendor_id(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->vendor_id); + return (le16_to_cpu(ee_map->vendor_id)); return(0); } @@ -730,7 +730,7 @@ ixgb_get_ee_swdpins_reg(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->swdpins_reg); + return (le16_to_cpu(ee_map->swdpins_reg)); return(0); } @@ -749,7 +749,7 @@ ixgb_get_ee_d3_power(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->d3_power); + return (le16_to_cpu(ee_map->d3_power)); return(0); } @@ -768,7 +768,7 @@ ixgb_get_ee_d0_power(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->d0_power); + return (le16_to_cpu(ee_map->d0_power)); return(0); } diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index aea10e8aaa7..3fa113854ee 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -252,7 +252,9 @@ ixgb_get_regs(struct net_device *netdev, uint32_t *reg_start = reg; uint8_t i; - regs->version = (adapter->hw.device_id << 16) | adapter->hw.subsystem_id; + /* the 1 (one) below indicates an attempt at versioning, if the + * interface in ethtool or the driver this 1 should be incremented */ + regs->version = (1<<24) | hw->revision_id << 16 | hw->device_id; /* General Registers */ *reg++ = IXGB_READ_REG(hw, CTRL0); /* 0 */ diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index 7d26623d859..35f6a7c271a 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -47,7 +47,7 @@ char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -char ixgb_driver_version[] = "1.0.90-k2"DRIVERNAPI; +char ixgb_driver_version[] = "1.0.95-k2"DRIVERNAPI; char ixgb_copyright[] = "Copyright (c) 1999-2005 Intel Corporation."; /* ixgb_pci_tbl - PCI Device ID Table @@ -103,6 +103,7 @@ static int ixgb_change_mtu(struct net_device *netdev, int new_mtu); static int ixgb_set_mac(struct net_device *netdev, void *p); static irqreturn_t ixgb_intr(int irq, void *data, struct pt_regs *regs); static boolean_t ixgb_clean_tx_irq(struct ixgb_adapter *adapter); + #ifdef CONFIG_IXGB_NAPI static int ixgb_clean(struct net_device *netdev, int *budget); static boolean_t ixgb_clean_rx_irq(struct ixgb_adapter *adapter, @@ -120,33 +121,20 @@ static void ixgb_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid); static void ixgb_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); static void ixgb_restore_vlan(struct ixgb_adapter *adapter); -static int ixgb_notify_reboot(struct notifier_block *, unsigned long event, - void *ptr); -static int ixgb_suspend(struct pci_dev *pdev, uint32_t state); - #ifdef CONFIG_NET_POLL_CONTROLLER /* for netdump / net console */ static void ixgb_netpoll(struct net_device *dev); #endif -struct notifier_block ixgb_notifier_reboot = { - .notifier_call = ixgb_notify_reboot, - .next = NULL, - .priority = 0 -}; - /* Exported from other modules */ extern void ixgb_check_options(struct ixgb_adapter *adapter); static struct pci_driver ixgb_driver = { - .name = ixgb_driver_name, + .name = ixgb_driver_name, .id_table = ixgb_pci_tbl, - .probe = ixgb_probe, - .remove = __devexit_p(ixgb_remove), - /* Power Managment Hooks */ - .suspend = NULL, - .resume = NULL + .probe = ixgb_probe, + .remove = __devexit_p(ixgb_remove), }; MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); @@ -169,17 +157,12 @@ MODULE_LICENSE("GPL"); static int __init ixgb_init_module(void) { - int ret; printk(KERN_INFO "%s - version %s\n", ixgb_driver_string, ixgb_driver_version); printk(KERN_INFO "%s\n", ixgb_copyright); - ret = pci_module_init(&ixgb_driver); - if(ret >= 0) { - register_reboot_notifier(&ixgb_notifier_reboot); - } - return ret; + return pci_module_init(&ixgb_driver); } module_init(ixgb_init_module); @@ -194,7 +177,6 @@ module_init(ixgb_init_module); static void __exit ixgb_exit_module(void) { - unregister_reboot_notifier(&ixgb_notifier_reboot); pci_unregister_driver(&ixgb_driver); } @@ -224,8 +206,8 @@ ixgb_irq_enable(struct ixgb_adapter *adapter) { if(atomic_dec_and_test(&adapter->irq_sem)) { IXGB_WRITE_REG(&adapter->hw, IMS, - IXGB_INT_RXT0 | IXGB_INT_RXDMT0 | IXGB_INT_TXDW | - IXGB_INT_RXO | IXGB_INT_LSC); + IXGB_INT_RXT0 | IXGB_INT_RXDMT0 | IXGB_INT_TXDW | + IXGB_INT_LSC); IXGB_WRITE_FLUSH(&adapter->hw); } } @@ -1209,10 +1191,10 @@ ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb) | IXGB_CONTEXT_DESC_CMD_TSE | IXGB_CONTEXT_DESC_CMD_IP | IXGB_CONTEXT_DESC_CMD_TCP - | IXGB_CONTEXT_DESC_CMD_RS | IXGB_CONTEXT_DESC_CMD_IDE | (skb->len - (hdr_len))); + if(++i == adapter->tx_ring.count) i = 0; adapter->tx_ring.next_to_use = i; @@ -1247,8 +1229,7 @@ ixgb_tx_csum(struct ixgb_adapter *adapter, struct sk_buff *skb) context_desc->mss = 0; context_desc->cmd_type_len = cpu_to_le32(IXGB_CONTEXT_DESC_TYPE - | IXGB_TX_DESC_CMD_RS - | IXGB_TX_DESC_CMD_IDE); + | IXGB_TX_DESC_CMD_IDE); if(++i == adapter->tx_ring.count) i = 0; adapter->tx_ring.next_to_use = i; @@ -1273,6 +1254,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb, unsigned int nr_frags = skb_shinfo(skb)->nr_frags; unsigned int f; + len -= skb->data_len; i = tx_ring->next_to_use; @@ -1526,14 +1508,33 @@ ixgb_change_mtu(struct net_device *netdev, int new_mtu) void ixgb_update_stats(struct ixgb_adapter *adapter) { + struct net_device *netdev = adapter->netdev; + + if((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) || + (netdev->mc_count > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) { + u64 multi = IXGB_READ_REG(&adapter->hw, MPRCL); + u32 bcast_l = IXGB_READ_REG(&adapter->hw, BPRCL); + u32 bcast_h = IXGB_READ_REG(&adapter->hw, BPRCH); + u64 bcast = ((u64)bcast_h << 32) | bcast_l; + + multi |= ((u64)IXGB_READ_REG(&adapter->hw, MPRCH) << 32); + /* fix up multicast stats by removing broadcasts */ + multi -= bcast; + + adapter->stats.mprcl += (multi & 0xFFFFFFFF); + adapter->stats.mprch += (multi >> 32); + adapter->stats.bprcl += bcast_l; + adapter->stats.bprch += bcast_h; + } else { + adapter->stats.mprcl += IXGB_READ_REG(&adapter->hw, MPRCL); + adapter->stats.mprch += IXGB_READ_REG(&adapter->hw, MPRCH); + adapter->stats.bprcl += IXGB_READ_REG(&adapter->hw, BPRCL); + adapter->stats.bprch += IXGB_READ_REG(&adapter->hw, BPRCH); + } adapter->stats.tprl += IXGB_READ_REG(&adapter->hw, TPRL); adapter->stats.tprh += IXGB_READ_REG(&adapter->hw, TPRH); adapter->stats.gprcl += IXGB_READ_REG(&adapter->hw, GPRCL); adapter->stats.gprch += IXGB_READ_REG(&adapter->hw, GPRCH); - adapter->stats.bprcl += IXGB_READ_REG(&adapter->hw, BPRCL); - adapter->stats.bprch += IXGB_READ_REG(&adapter->hw, BPRCH); - adapter->stats.mprcl += IXGB_READ_REG(&adapter->hw, MPRCL); - adapter->stats.mprch += IXGB_READ_REG(&adapter->hw, MPRCH); adapter->stats.uprcl += IXGB_READ_REG(&adapter->hw, UPRCL); adapter->stats.uprch += IXGB_READ_REG(&adapter->hw, UPRCH); adapter->stats.vprcl += IXGB_READ_REG(&adapter->hw, VPRCL); @@ -1823,7 +1824,6 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) struct pci_dev *pdev = adapter->pdev; struct ixgb_rx_desc *rx_desc, *next_rxd; struct ixgb_buffer *buffer_info, *next_buffer, *next2_buffer; - struct sk_buff *skb, *next_skb; uint32_t length; unsigned int i, j; boolean_t cleaned = FALSE; @@ -1833,6 +1833,8 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) buffer_info = &rx_ring->buffer_info[i]; while(rx_desc->status & IXGB_RX_DESC_STATUS_DD) { + struct sk_buff *skb, *next_skb; + u8 status; #ifdef CONFIG_IXGB_NAPI if(*work_done >= work_to_do) @@ -1840,7 +1842,9 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) (*work_done)++; #endif + status = rx_desc->status; skb = buffer_info->skb; + prefetch(skb->data); if(++i == rx_ring->count) i = 0; @@ -1855,7 +1859,6 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) next_skb = next_buffer->skb; prefetch(next_skb); - cleaned = TRUE; pci_unmap_single(pdev, @@ -1865,7 +1868,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) length = le16_to_cpu(rx_desc->length); - if(unlikely(!(rx_desc->status & IXGB_RX_DESC_STATUS_EOP))) { + if(unlikely(!(status & IXGB_RX_DESC_STATUS_EOP))) { /* All receives must fit into a single buffer */ @@ -1873,12 +1876,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) "length<%x>\n", length); dev_kfree_skb_irq(skb); - rx_desc->status = 0; - buffer_info->skb = NULL; - - rx_desc = next_rxd; - buffer_info = next_buffer; - continue; + goto rxdesc_done; } if (unlikely(rx_desc->errors @@ -1887,12 +1885,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) IXGB_RX_DESC_ERRORS_RXE))) { dev_kfree_skb_irq(skb); - rx_desc->status = 0; - buffer_info->skb = NULL; - - rx_desc = next_rxd; - buffer_info = next_buffer; - continue; + goto rxdesc_done; } /* Good Receive */ @@ -1903,7 +1896,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) skb->protocol = eth_type_trans(skb, netdev); #ifdef CONFIG_IXGB_NAPI - if(adapter->vlgrp && (rx_desc->status & IXGB_RX_DESC_STATUS_VP)) { + if(adapter->vlgrp && (status & IXGB_RX_DESC_STATUS_VP)) { vlan_hwaccel_receive_skb(skb, adapter->vlgrp, le16_to_cpu(rx_desc->special) & IXGB_RX_DESC_SPECIAL_VLAN_MASK); @@ -1911,7 +1904,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) netif_receive_skb(skb); } #else /* CONFIG_IXGB_NAPI */ - if(adapter->vlgrp && (rx_desc->status & IXGB_RX_DESC_STATUS_VP)) { + if(adapter->vlgrp && (status & IXGB_RX_DESC_STATUS_VP)) { vlan_hwaccel_rx(skb, adapter->vlgrp, le16_to_cpu(rx_desc->special) & IXGB_RX_DESC_SPECIAL_VLAN_MASK); @@ -1921,9 +1914,12 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) #endif /* CONFIG_IXGB_NAPI */ netdev->last_rx = jiffies; +rxdesc_done: + /* clean up descriptor, might be written over by hw */ rx_desc->status = 0; buffer_info->skb = NULL; + /* use prefetched values */ rx_desc = next_rxd; buffer_info = next_buffer; } @@ -1959,8 +1955,8 @@ ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter) num_group_tail_writes = IXGB_RX_BUFFER_WRITE; - /* leave one descriptor unused */ - while(--cleancount > 0) { + /* leave three descriptors unused */ + while(--cleancount > 2) { rx_desc = IXGB_RX_DESC(*rx_ring, i); skb = dev_alloc_skb(adapter->rx_buffer_len + NET_IP_ALIGN); @@ -1987,6 +1983,10 @@ ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter) PCI_DMA_FROMDEVICE); rx_desc->buff_addr = cpu_to_le64(buffer_info->dma); + /* guarantee DD bit not set now before h/w gets descriptor + * this is the rest of the workaround for h/w double + * writeback. */ + rx_desc->status = 0; if((i & ~(num_group_tail_writes- 1)) == i) { /* Force memory writes to complete before letting h/w @@ -2099,54 +2099,6 @@ ixgb_restore_vlan(struct ixgb_adapter *adapter) } } -/** - * ixgb_notify_reboot - handles OS notification of reboot event. - * @param nb notifier block, unused - * @param event Event being passed to driver to act upon - * @param p A pointer to our net device - **/ -static int -ixgb_notify_reboot(struct notifier_block *nb, unsigned long event, void *p) -{ - struct pci_dev *pdev = NULL; - - switch(event) { - case SYS_DOWN: - case SYS_HALT: - case SYS_POWER_OFF: - while ((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) { - if (pci_dev_driver(pdev) == &ixgb_driver) - ixgb_suspend(pdev, 3); - } - } - return NOTIFY_DONE; -} - -/** - * ixgb_suspend - driver suspend function called from notify. - * @param pdev pci driver structure used for passing to - * @param state power state to enter - **/ -static int -ixgb_suspend(struct pci_dev *pdev, uint32_t state) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct ixgb_adapter *adapter = netdev->priv; - - netif_device_detach(netdev); - - if(netif_running(netdev)) - ixgb_down(adapter, TRUE); - - pci_save_state(pdev); - - state = (state > 0) ? 3 : 0; - pci_set_power_state(pdev, state); - msec_delay(200); - - return 0; -} - #ifdef CONFIG_NET_POLL_CONTROLLER /* * Polling 'interrupt' - used by things like netconsole to send skbs @@ -2157,6 +2109,7 @@ ixgb_suspend(struct pci_dev *pdev, uint32_t state) static void ixgb_netpoll(struct net_device *dev) { struct ixgb_adapter *adapter = dev->priv; + disable_irq(adapter->pdev->irq); ixgb_intr(adapter->pdev->irq, dev, NULL); enable_irq(adapter->pdev->irq); diff --git a/drivers/net/ixgb/ixgb_osdep.h b/drivers/net/ixgb/ixgb_osdep.h index 9eba9289190..dba20481ee8 100644 --- a/drivers/net/ixgb/ixgb_osdep.h +++ b/drivers/net/ixgb/ixgb_osdep.h @@ -45,8 +45,7 @@ /* Don't mdelay in interrupt context! */ \ BUG(); \ } else { \ - set_current_state(TASK_UNINTERRUPTIBLE); \ - schedule_timeout((x * HZ)/1000 + 2); \ + msleep(x); \ } } while(0) #endif diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 223bdadd4c0..babb59e146e 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -2433,9 +2433,9 @@ static void __set_rx_mode(struct net_device *dev) rx_mode = RxFilterEnable | AcceptBroadcast | AcceptMulticast | AcceptMyPhys; for (i = 0; i < 64; i += 2) { - writew(HASH_TABLE + i, ioaddr + RxFilterAddr); - writew((mc_filter[i+1]<<8) + mc_filter[i], - ioaddr + RxFilterData); + writel(HASH_TABLE + i, ioaddr + RxFilterAddr); + writel((mc_filter[i + 1] << 8) + mc_filter[i], + ioaddr + RxFilterData); } } writel(rx_mode, ioaddr + RxFilterAddr); diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index 2fcc181a862..c336b46bd33 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -1,4 +1,4 @@ -#define _VERSION "0.20" +#define VERSION "0.22" /* ns83820.c by Benjamin LaHaise with contributions. * * Questions/comments/discussion to linux-ns83820@kvack.org. @@ -63,9 +63,11 @@ * - fix missed txok introduced during performance * tuning * 0.20 - fix stupid RFEN thinko. i am such a smurf. - * * 20040828 0.21 - add hardware vlan accleration * by Neil Horman <nhorman@redhat.com> + * 20050406 0.22 - improved DAC ifdefs from Andi Kleen + * - removal of dead code from Adrian Bunk + * - fix half duplex collision behaviour * Driver Overview * =============== * @@ -129,18 +131,6 @@ static int lnksts = 0; /* CFG_LNKSTS bit polarity */ #undef Dprintk #define Dprintk dprintk -#if defined(CONFIG_HIGHMEM64G) || defined(__ia64__) -#define USE_64BIT_ADDR "+" -#endif - -#if defined(USE_64BIT_ADDR) -#define VERSION _VERSION USE_64BIT_ADDR -#define TRY_DAC 1 -#else -#define VERSION _VERSION -#define TRY_DAC 0 -#endif - /* tunables */ #define RX_BUF_SIZE 1500 /* 8192 */ #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) @@ -386,22 +376,16 @@ static int lnksts = 0; /* CFG_LNKSTS bit polarity */ #define LINK_DOWN 0x02 #define LINK_UP 0x04 -#ifdef USE_64BIT_ADDR -#define HW_ADDR_LEN 8 +#define HW_ADDR_LEN sizeof(dma_addr_t) #define desc_addr_set(desc, addr) \ do { \ - u64 __addr = (addr); \ - (desc)[0] = cpu_to_le32(__addr); \ - (desc)[1] = cpu_to_le32(__addr >> 32); \ + ((desc)[0] = cpu_to_le32(addr)); \ + if (HW_ADDR_LEN == 8) \ + (desc)[1] = cpu_to_le32(((u64)addr) >> 32); \ } while(0) #define desc_addr_get(desc) \ - (((u64)le32_to_cpu((desc)[1]) << 32) \ - | le32_to_cpu((desc)[0])) -#else -#define HW_ADDR_LEN 4 -#define desc_addr_set(desc, addr) ((desc)[0] = cpu_to_le32(addr)) -#define desc_addr_get(desc) (le32_to_cpu((desc)[0])) -#endif + (le32_to_cpu((desc)[0]) | \ + (HW_ADDR_LEN == 8 ? ((dma_addr_t)le32_to_cpu((desc)[1]))<<32 : 0)) #define DESC_LINK 0 #define DESC_BUFPTR (DESC_LINK + HW_ADDR_LEN/4) @@ -727,11 +711,23 @@ static void fastcall phy_intr(struct net_device *ndev) speed = ((cfg / CFG_SPDSTS0) & 3); fullduplex = (cfg & CFG_DUPSTS); - if (fullduplex) + if (fullduplex) { new_cfg |= CFG_SB; + writel(readl(dev->base + TXCFG) + | TXCFG_CSI | TXCFG_HBI, + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) | RXCFG_RX_FD, + dev->base + RXCFG); + } else { + writel(readl(dev->base + TXCFG) + & ~(TXCFG_CSI | TXCFG_HBI), + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) & ~(RXCFG_RX_FD), + dev->base + RXCFG); + } if ((cfg & CFG_LNKSTS) && - ((new_cfg ^ dev->CFG_cache) & CFG_MODE_1000)) { + ((new_cfg ^ dev->CFG_cache) != 0)) { writel(new_cfg, dev->base + CFG); dev->CFG_cache = new_cfg; } @@ -1189,7 +1185,6 @@ again: for (;;) { volatile u32 *desc = dev->tx_descs + (free_idx * DESC_SIZE); - u32 residue = 0; dprintk("frag[%3u]: %4u @ 0x%08Lx\n", free_idx, len, (unsigned long long)buf); @@ -1199,17 +1194,11 @@ again: desc_addr_set(desc + DESC_BUFPTR, buf); desc[DESC_EXTSTS] = cpu_to_le32(extsts); - cmdsts = ((nr_frags|residue) ? CMDSTS_MORE : do_intr ? CMDSTS_INTR : 0); + cmdsts = ((nr_frags) ? CMDSTS_MORE : do_intr ? CMDSTS_INTR : 0); cmdsts |= (desc == first_desc) ? 0 : CMDSTS_OWN; cmdsts |= len; desc[DESC_CMDSTS] = cpu_to_le32(cmdsts); - if (residue) { - buf += len; - len = residue; - continue; - } - if (!nr_frags) break; @@ -1841,7 +1830,8 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ int using_dac = 0; /* See if we can set the dma mask early on; failure is fatal. */ - if (TRY_DAC && !pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) { + if (sizeof(dma_addr_t) == 8 && + !pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) { using_dac = 1; } else if (!pci_set_dma_mask(pci_dev, 0xffffffff)) { using_dac = 0; @@ -1972,9 +1962,8 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ /* When compiled with 64 bit addressing, we must always enable * the 64 bit descriptor format. */ -#ifdef USE_64BIT_ADDR - dev->CFG_cache |= CFG_M64ADDR; -#endif + if (sizeof(dma_addr_t) == 8) + dev->CFG_cache |= CFG_M64ADDR; if (using_dac) dev->CFG_cache |= CFG_T64ADDR; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index b0126304ca0..181b6ed5500 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1537,20 +1537,20 @@ static void shmem_get_8390_hdr(struct net_device *dev, static void shmem_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) { - void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8) - + ring_offset + void __iomem *base = ei_status.mem; + unsigned long offset = (TX_PAGES<<8) + ring_offset - (ei_status.rx_start_page << 8); char *buf = skb->data; - if (xfer_start + count > (void __iomem *)ei_status.rmem_end) { + if (offset + count > ei_status.priv) { /* We must wrap the input move. */ - int semi_count = (void __iomem *)ei_status.rmem_end - xfer_start; - copyin(buf, xfer_start, semi_count); + int semi_count = ei_status.priv - offset; + copyin(buf, base + offset, semi_count); buf += semi_count; - xfer_start = ei_status.mem + (TX_PAGES<<8); + offset = TX_PAGES<<8; count -= semi_count; } - copyin(buf, xfer_start, count); + copyin(buf, base + offset, count); } /*====================================================================*/ @@ -1611,8 +1611,9 @@ static int setup_shmem_window(dev_link_t *link, int start_pg, } ei_status.mem = info->base + offset; + ei_status.priv = req.Size; dev->mem_start = (u_long)ei_status.mem; - dev->mem_end = ei_status.rmem_end = (u_long)info->base + req.Size; + dev->mem_end = dev->mem_start + req.Size; ei_status.tx_start_page = start_pg; ei_status.rx_start_page = start_pg + TX_PAGES; diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 17947e6c879..13f11487696 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -22,8 +22,8 @@ *************************************************************************/ #define DRV_NAME "pcnet32" -#define DRV_VERSION "1.30i" -#define DRV_RELDATE "06.28.2004" +#define DRV_VERSION "1.30j" +#define DRV_RELDATE "29.04.2005" #define PFX DRV_NAME ": " static const char *version = @@ -256,6 +256,7 @@ static int homepna[MAX_UNITS]; * homepna for selecting HomePNA mode for PCNet/Home 79C978. * v1.30h 24 Jun 2004 Don Fry correctly select auto, speed, duplex in bcr32. * v1.30i 28 Jun 2004 Don Fry change to use module_param. + * v1.30j 29 Apr 2005 Don Fry fix skb/map leak with loopback test. */ @@ -395,6 +396,7 @@ static void pcnet32_led_blink_callback(struct net_device *dev); static int pcnet32_get_regs_len(struct net_device *dev); static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *ptr); +static void pcnet32_purge_tx_ring(struct net_device *dev); enum pci_flags_bit { PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, @@ -785,6 +787,7 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t *data1) } clean_up: + pcnet32_purge_tx_ring(dev); x = a->read_csr(ioaddr, 15) & 0xFFFF; a->write_csr(ioaddr, 15, (x & ~0x0044)); /* reset bits 6 and 2 */ diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 3b377f6cd4a..ad4b58af6b7 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -1217,36 +1217,43 @@ ppp_push(struct ppp *ppp) */ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) { - int nch, len, fragsize; + int len, fragsize; int i, bits, hdrlen, mtu; - int flen, fnb; + int flen; + int navail, nfree; + int nbigger; unsigned char *p, *q; struct list_head *list; struct channel *pch; struct sk_buff *frag; struct ppp_channel *chan; - nch = 0; + nfree = 0; /* # channels which have no packet already queued */ + navail = 0; /* total # of usable channels (not deregistered) */ hdrlen = (ppp->flags & SC_MP_XSHORTSEQ)? MPHDRLEN_SSN: MPHDRLEN; + i = 0; list = &ppp->channels; while ((list = list->next) != &ppp->channels) { pch = list_entry(list, struct channel, clist); - nch += pch->avail = (skb_queue_len(&pch->file.xq) == 0); - /* - * If a channel hasn't had a fragment yet, it has to get - * one before we send any fragments on later channels. - * If it can't take a fragment now, don't give any - * to subsequent channels. - */ - if (!pch->had_frag && !pch->avail) { - while ((list = list->next) != &ppp->channels) { - pch = list_entry(list, struct channel, clist); - pch->avail = 0; + navail += pch->avail = (pch->chan != NULL); + if (pch->avail) { + if (skb_queue_len(&pch->file.xq) == 0 + || !pch->had_frag) { + pch->avail = 2; + ++nfree; } - break; + if (!pch->had_frag && i < ppp->nxchan) + ppp->nxchan = i; } + ++i; } - if (nch == 0) + + /* + * Don't start sending this packet unless at least half of + * the channels are free. This gives much better TCP + * performance if we have a lot of channels. + */ + if (nfree == 0 || nfree < navail / 2) return 0; /* can't take now, leave it in xmit_pending */ /* Do protocol field compression (XXX this should be optional) */ @@ -1257,14 +1264,19 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) --len; } - /* decide on fragment size */ + /* + * Decide on fragment size. + * We create a fragment for each free channel regardless of + * how small they are (i.e. even 0 length) in order to minimize + * the time that it will take to detect when a channel drops + * a fragment. + */ fragsize = len; - if (nch > 1) { - int maxch = ROUNDUP(len, MIN_FRAG_SIZE); - if (nch > maxch) - nch = maxch; - fragsize = ROUNDUP(fragsize, nch); - } + if (nfree > 1) + fragsize = ROUNDUP(fragsize, nfree); + /* nbigger channels get fragsize bytes, the rest get fragsize-1, + except if nbigger==0, then they all get fragsize. */ + nbigger = len % nfree; /* skip to the channel after the one we last used and start at that one */ @@ -1278,7 +1290,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) /* create a fragment for each channel */ bits = B; - do { + while (nfree > 0 || len > 0) { list = list->next; if (list == &ppp->channels) { i = 0; @@ -1289,61 +1301,92 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) if (!pch->avail) continue; + /* + * Skip this channel if it has a fragment pending already and + * we haven't given a fragment to all of the free channels. + */ + if (pch->avail == 1) { + if (nfree > 0) + continue; + } else { + --nfree; + pch->avail = 1; + } + /* check the channel's mtu and whether it is still attached. */ spin_lock_bh(&pch->downl); - if (pch->chan == 0 || (mtu = pch->chan->mtu) < hdrlen) { - /* can't use this channel */ + if (pch->chan == NULL) { + /* can't use this channel, it's being deregistered */ spin_unlock_bh(&pch->downl); pch->avail = 0; - if (--nch == 0) + if (--navail == 0) break; continue; } /* - * We have to create multiple fragments for this channel - * if fragsize is greater than the channel's mtu. + * Create a fragment for this channel of + * min(max(mtu+2-hdrlen, 4), fragsize, len) bytes. + * If mtu+2-hdrlen < 4, that is a ridiculously small + * MTU, so we use mtu = 2 + hdrlen. */ if (fragsize > len) fragsize = len; - for (flen = fragsize; flen > 0; flen -= fnb) { - fnb = flen; - if (fnb > mtu + 2 - hdrlen) - fnb = mtu + 2 - hdrlen; - if (fnb >= len) - bits |= E; - frag = alloc_skb(fnb + hdrlen, GFP_ATOMIC); - if (frag == 0) - goto noskb; - q = skb_put(frag, fnb + hdrlen); - /* make the MP header */ - q[0] = PPP_MP >> 8; - q[1] = PPP_MP; - if (ppp->flags & SC_MP_XSHORTSEQ) { - q[2] = bits + ((ppp->nxseq >> 8) & 0xf); - q[3] = ppp->nxseq; - } else { - q[2] = bits; - q[3] = ppp->nxseq >> 16; - q[4] = ppp->nxseq >> 8; - q[5] = ppp->nxseq; - } - - /* copy the data in */ - memcpy(q + hdrlen, p, fnb); - - /* try to send it down the channel */ - chan = pch->chan; - if (!chan->ops->start_xmit(chan, frag)) - skb_queue_tail(&pch->file.xq, frag); - pch->had_frag = 1; - p += fnb; - len -= fnb; - ++ppp->nxseq; - bits = 0; + flen = fragsize; + mtu = pch->chan->mtu + 2 - hdrlen; + if (mtu < 4) + mtu = 4; + if (flen > mtu) + flen = mtu; + if (flen == len && nfree == 0) + bits |= E; + frag = alloc_skb(flen + hdrlen + (flen == 0), GFP_ATOMIC); + if (frag == 0) + goto noskb; + q = skb_put(frag, flen + hdrlen); + + /* make the MP header */ + q[0] = PPP_MP >> 8; + q[1] = PPP_MP; + if (ppp->flags & SC_MP_XSHORTSEQ) { + q[2] = bits + ((ppp->nxseq >> 8) & 0xf); + q[3] = ppp->nxseq; + } else { + q[2] = bits; + q[3] = ppp->nxseq >> 16; + q[4] = ppp->nxseq >> 8; + q[5] = ppp->nxseq; } + + /* + * Copy the data in. + * Unfortunately there is a bug in older versions of + * the Linux PPP multilink reconstruction code where it + * drops 0-length fragments. Therefore we make sure the + * fragment has at least one byte of data. Any bytes + * we add in this situation will end up as padding on the + * end of the reconstructed packet. + */ + if (flen == 0) + *skb_put(frag, 1) = 0; + else + memcpy(q + hdrlen, p, flen); + + /* try to send it down the channel */ + chan = pch->chan; + if (skb_queue_len(&pch->file.xq) + || !chan->ops->start_xmit(chan, frag)) + skb_queue_tail(&pch->file.xq, frag); + pch->had_frag = 1; + p += flen; + len -= flen; + ++ppp->nxseq; + bits = 0; spin_unlock_bh(&pch->downl); - } while (len > 0); + + if (--nbigger == 0 && fragsize > 0) + --fragsize; + } ppp->nxchan = i; return 1; @@ -1422,7 +1465,7 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb) kfree_skb(skb); return; } - + proto = PPP_PROTO(skb); read_lock_bh(&pch->upl); if (pch->ppp == 0 || proto >= 0xc000 || proto == PPP_CCPFRAG) { @@ -1691,7 +1734,7 @@ ppp_receive_mp_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) struct list_head *l; int mphdrlen = (ppp->flags & SC_MP_SHORTSEQ)? MPHDRLEN_SSN: MPHDRLEN; - if (!pskb_may_pull(skb, mphdrlen + 1) || ppp->mrru == 0) + if (!pskb_may_pull(skb, mphdrlen) || ppp->mrru == 0) goto err; /* no good, throw it away */ /* Decode sequence number and begin/end bits */ diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index c59507f8a76..882c59fe9f8 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -69,7 +69,13 @@ VERSION 2.2LK <2005/01/25> #include <asm/io.h> #include <asm/irq.h> -#define RTL8169_VERSION "2.2LK" +#ifdef CONFIG_R8169_NAPI +#define NAPI_SUFFIX "-NAPI" +#else +#define NAPI_SUFFIX "" +#endif + +#define RTL8169_VERSION "2.2LK" NAPI_SUFFIX #define MODULENAME "r8169" #define PFX MODULENAME ": " @@ -85,6 +91,10 @@ VERSION 2.2LK <2005/01/25> #define dprintk(fmt, args...) do {} while (0) #endif /* RTL8169_DEBUG */ +#define R8169_MSG_DEFAULT \ + (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | NETIF_MSG_IFUP | \ + NETIF_MSG_IFDOWN) + #define TX_BUFFS_AVAIL(tp) \ (tp->dirty_tx + NUM_TX_DESC - tp->cur_tx - 1) @@ -174,8 +184,9 @@ const static struct { #undef _R static struct pci_device_id rtl8169_pci_tbl[] = { - {0x10ec, 0x8169, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {0x1186, 0x4300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4300), }, + { PCI_DEVICE(0x16ec, 0x0116), }, {0,}, }; @@ -183,10 +194,15 @@ MODULE_DEVICE_TABLE(pci, rtl8169_pci_tbl); static int rx_copybreak = 200; static int use_dac; +static struct { + u32 msg_enable; +} debug = { -1 }; enum RTL8169_registers { MAC0 = 0, /* Ethernet hardware address. */ MAR0 = 8, /* Multicast filter. */ + CounterAddrLow = 0x10, + CounterAddrHigh = 0x14, TxDescStartAddrLow = 0x20, TxDescStartAddrHigh = 0x24, TxHDescStartAddrLow = 0x28, @@ -328,6 +344,9 @@ enum RTL8169_register_content { /* _TBICSRBit */ TBILinkOK = 0x02000000, + + /* DumpCounterCommand */ + CounterDump = 0x8, }; enum _DescStatusBit { @@ -385,6 +404,7 @@ struct rtl8169_private { struct pci_dev *pci_dev; /* Index of PCI device */ struct net_device_stats stats; /* statistics of net device */ spinlock_t lock; /* spin lock flag */ + u32 msg_enable; int chipset; int mac_version; int phy_version; @@ -418,9 +438,13 @@ struct rtl8169_private { MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@oss.sgi.com>"); MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver"); module_param_array(media, int, &num_media, 0); +MODULE_PARM_DESC(media, "force phy operation. Deprecated by ethtool (8)."); module_param(rx_copybreak, int, 0); +MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); module_param(use_dac, int, 0); MODULE_PARM_DESC(use_dac, "Enable PCI DAC. Unsafe on 32 bit PCI slot."); +module_param_named(debug, debug.msg_enable, int, 0); +MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)"); MODULE_LICENSE("GPL"); MODULE_VERSION(RTL8169_VERSION); @@ -433,10 +457,10 @@ static void rtl8169_hw_start(struct net_device *dev); static int rtl8169_close(struct net_device *dev); static void rtl8169_set_rx_mode(struct net_device *dev); static void rtl8169_tx_timeout(struct net_device *dev); -static struct net_device_stats *rtl8169_get_stats(struct net_device *netdev); +static struct net_device_stats *rtl8169_get_stats(struct net_device *dev); static int rtl8169_rx_interrupt(struct net_device *, struct rtl8169_private *, void __iomem *); -static int rtl8169_change_mtu(struct net_device *netdev, int new_mtu); +static int rtl8169_change_mtu(struct net_device *dev, int new_mtu); static void rtl8169_down(struct net_device *dev); #ifdef CONFIG_R8169_NAPI @@ -543,9 +567,13 @@ static void rtl8169_check_link_status(struct net_device *dev, spin_lock_irqsave(&tp->lock, flags); if (tp->link_ok(ioaddr)) { netif_carrier_on(dev); - printk(KERN_INFO PFX "%s: link up\n", dev->name); - } else + if (netif_msg_ifup(tp)) + printk(KERN_INFO PFX "%s: link up\n", dev->name); + } else { + if (netif_msg_ifdown(tp)) + printk(KERN_INFO PFX "%s: link down\n", dev->name); netif_carrier_off(dev); + } spin_unlock_irqrestore(&tp->lock, flags); } @@ -569,7 +597,7 @@ static void rtl8169_link_option(int idx, u8 *autoneg, u16 *speed, u8 *duplex) option = ((idx < MAX_UNITS) && (idx >= 0)) ? media[idx] : 0xff; - if ((option != 0xff) && !idx) + if ((option != 0xff) && !idx && netif_msg_drv(&debug)) printk(KERN_WARNING PFX "media option is deprecated.\n"); for (p = link_settings; p->media != 0xff; p++) { @@ -611,9 +639,11 @@ static int rtl8169_set_speed_tbi(struct net_device *dev, } else if (autoneg == AUTONEG_ENABLE) RTL_W32(TBICSR, reg | TBINwEnable | TBINwRestart); else { - printk(KERN_WARNING PFX - "%s: incorrect speed setting refused in TBI mode\n", - dev->name); + if (netif_msg_link(tp)) { + printk(KERN_WARNING "%s: " + "incorrect speed setting refused in TBI mode\n", + dev->name); + } ret = -EOPNOTSUPP; } @@ -871,12 +901,120 @@ static void rtl8169_get_regs(struct net_device *dev, struct ethtool_regs *regs, spin_unlock_irqrestore(&tp->lock, flags); } +static u32 rtl8169_get_msglevel(struct net_device *dev) +{ + struct rtl8169_private *tp = netdev_priv(dev); + + return tp->msg_enable; +} + +static void rtl8169_set_msglevel(struct net_device *dev, u32 value) +{ + struct rtl8169_private *tp = netdev_priv(dev); + + tp->msg_enable = value; +} + +static const char rtl8169_gstrings[][ETH_GSTRING_LEN] = { + "tx_packets", + "rx_packets", + "tx_errors", + "rx_errors", + "rx_missed", + "align_errors", + "tx_single_collisions", + "tx_multi_collisions", + "unicast", + "broadcast", + "multicast", + "tx_aborted", + "tx_underrun", +}; + +struct rtl8169_counters { + u64 tx_packets; + u64 rx_packets; + u64 tx_errors; + u32 rx_errors; + u16 rx_missed; + u16 align_errors; + u32 tx_one_collision; + u32 tx_multi_collision; + u64 rx_unicast; + u64 rx_broadcast; + u32 rx_multicast; + u16 tx_aborted; + u16 tx_underun; +}; + +static int rtl8169_get_stats_count(struct net_device *dev) +{ + return ARRAY_SIZE(rtl8169_gstrings); +} + +static void rtl8169_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + struct rtl8169_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + struct rtl8169_counters *counters; + dma_addr_t paddr; + u32 cmd; + + ASSERT_RTNL(); + + counters = pci_alloc_consistent(tp->pci_dev, sizeof(*counters), &paddr); + if (!counters) + return; + + RTL_W32(CounterAddrHigh, (u64)paddr >> 32); + cmd = (u64)paddr & DMA_32BIT_MASK; + RTL_W32(CounterAddrLow, cmd); + RTL_W32(CounterAddrLow, cmd | CounterDump); + + while (RTL_R32(CounterAddrLow) & CounterDump) { + if (msleep_interruptible(1)) + break; + } + + RTL_W32(CounterAddrLow, 0); + RTL_W32(CounterAddrHigh, 0); + + data[0] = le64_to_cpu(counters->tx_packets); + data[1] = le64_to_cpu(counters->rx_packets); + data[2] = le64_to_cpu(counters->tx_errors); + data[3] = le32_to_cpu(counters->rx_errors); + data[4] = le16_to_cpu(counters->rx_missed); + data[5] = le16_to_cpu(counters->align_errors); + data[6] = le32_to_cpu(counters->tx_one_collision); + data[7] = le32_to_cpu(counters->tx_multi_collision); + data[8] = le64_to_cpu(counters->rx_unicast); + data[9] = le64_to_cpu(counters->rx_broadcast); + data[10] = le32_to_cpu(counters->rx_multicast); + data[11] = le16_to_cpu(counters->tx_aborted); + data[12] = le16_to_cpu(counters->tx_underun); + + pci_free_consistent(tp->pci_dev, sizeof(*counters), counters, paddr); +} + +static void rtl8169_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + switch(stringset) { + case ETH_SS_STATS: + memcpy(data, *rtl8169_gstrings, sizeof(rtl8169_gstrings)); + break; + } +} + + static struct ethtool_ops rtl8169_ethtool_ops = { .get_drvinfo = rtl8169_get_drvinfo, .get_regs_len = rtl8169_get_regs_len, .get_link = ethtool_op_get_link, .get_settings = rtl8169_get_settings, .set_settings = rtl8169_set_settings, + .get_msglevel = rtl8169_get_msglevel, + .set_msglevel = rtl8169_set_msglevel, .get_rx_csum = rtl8169_get_rx_csum, .set_rx_csum = rtl8169_set_rx_csum, .get_tx_csum = ethtool_op_get_tx_csum, @@ -886,6 +1024,9 @@ static struct ethtool_ops rtl8169_ethtool_ops = { .get_tso = ethtool_op_get_tso, .set_tso = ethtool_op_set_tso, .get_regs = rtl8169_get_regs, + .get_strings = rtl8169_get_strings, + .get_stats_count = rtl8169_get_stats_count, + .get_ethtool_stats = rtl8169_get_ethtool_stats, }; static void rtl8169_write_gmii_reg_bit(void __iomem *ioaddr, int reg, int bitnum, @@ -1091,7 +1232,8 @@ static void rtl8169_phy_timer(unsigned long __opaque) if (tp->link_ok(ioaddr)) goto out_unlock; - printk(KERN_WARNING PFX "%s: PHY reset until link up\n", dev->name); + if (netif_msg_link(tp)) + printk(KERN_WARNING "%s: PHY reset until link up\n", dev->name); tp->phy_reset_enable(ioaddr); @@ -1169,18 +1311,23 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, /* dev zeroed in alloc_etherdev */ dev = alloc_etherdev(sizeof (*tp)); if (dev == NULL) { - printk(KERN_ERR PFX "unable to alloc new ethernet\n"); + if (netif_msg_drv(&debug)) + printk(KERN_ERR PFX "unable to alloc new ethernet\n"); goto err_out; } SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); tp = netdev_priv(dev); + tp->msg_enable = netif_msg_init(debug.msg_enable, R8169_MSG_DEFAULT); /* enable device (incl. PCI PM wakeup and hotplug setup) */ rc = pci_enable_device(pdev); - if (rc) { - printk(KERN_ERR PFX "%s: enable failure\n", pci_name(pdev)); + if (rc < 0) { + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX "%s: enable failure\n", + pci_name(pdev)); + } goto err_out_free_dev; } @@ -1196,29 +1343,39 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, pci_read_config_word(pdev, pm_cap + PCI_PM_CTRL, &pwr_command); acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK; } else { - printk(KERN_ERR PFX - "Cannot find PowerManagement capability, aborting.\n"); + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX + "Cannot find PowerManagement capability. " + "Aborting.\n"); + } goto err_out_mwi; } /* make sure PCI base addr 1 is MMIO */ if (!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { - printk(KERN_ERR PFX - "region #1 not an MMIO resource, aborting\n"); + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX + "region #1 not an MMIO resource, aborting\n"); + } rc = -ENODEV; goto err_out_mwi; } /* check for weird/broken PCI region reporting */ if (pci_resource_len(pdev, 1) < R8169_REGS_SIZE) { - printk(KERN_ERR PFX "Invalid PCI region size(s), aborting\n"); + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX + "Invalid PCI region size(s), aborting\n"); + } rc = -ENODEV; goto err_out_mwi; } rc = pci_request_regions(pdev, MODULENAME); - if (rc) { - printk(KERN_ERR PFX "%s: could not request regions.\n", - pci_name(pdev)); + if (rc < 0) { + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX "%s: could not request regions.\n", + pci_name(pdev)); + } goto err_out_mwi; } @@ -1231,7 +1388,10 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, } else { rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc < 0) { - printk(KERN_ERR PFX "DMA configuration failed.\n"); + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX + "DMA configuration failed.\n"); + } goto err_out_free_res; } } @@ -1241,7 +1401,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, /* ioremap MMIO region */ ioaddr = ioremap(pci_resource_start(pdev, 1), R8169_REGS_SIZE); if (ioaddr == NULL) { - printk(KERN_ERR PFX "cannot remap MMIO, aborting\n"); + if (netif_msg_probe(tp)) + printk(KERN_ERR PFX "cannot remap MMIO, aborting\n"); rc = -EIO; goto err_out_free_res; } @@ -1272,9 +1433,11 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, } if (i < 0) { /* Unknown chip: assume array element #0, original RTL-8169 */ - printk(KERN_DEBUG PFX - "PCI device %s: unknown chip version, assuming %s\n", - pci_name(pdev), rtl_chip_info[0].name); + if (netif_msg_probe(tp)) { + printk(KERN_DEBUG PFX "PCI device %s: " + "unknown chip version, assuming %s\n", + pci_name(pdev), rtl_chip_info[0].name); + } i++; } tp->chipset = i; @@ -1308,7 +1471,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct rtl8169_private *tp; void __iomem *ioaddr = NULL; static int board_idx = -1; - static int printed_version = 0; u8 autoneg, duplex; u16 speed; int i, rc; @@ -1318,10 +1480,9 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) board_idx++; - if (!printed_version) { + if (netif_msg_drv(&debug)) { printk(KERN_INFO "%s Gigabit Ethernet driver %s loaded\n", MODULENAME, RTL8169_VERSION); - printed_version = 1; } rc = rtl8169_init_board(pdev, &dev, &ioaddr); @@ -1366,7 +1527,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) #ifdef CONFIG_R8169_NAPI dev->poll = rtl8169_poll; dev->weight = R8169_NAPI_WEIGHT; - printk(KERN_INFO PFX "NAPI enabled\n"); #endif #ifdef CONFIG_R8169_VLAN @@ -1391,20 +1551,24 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } - printk(KERN_DEBUG "%s: Identified chip type is '%s'.\n", dev->name, - rtl_chip_info[tp->chipset].name); + if (netif_msg_probe(tp)) { + printk(KERN_DEBUG "%s: Identified chip type is '%s'.\n", + dev->name, rtl_chip_info[tp->chipset].name); + } pci_set_drvdata(pdev, dev); - printk(KERN_INFO "%s: %s at 0x%lx, " - "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, " - "IRQ %d\n", - dev->name, - rtl_chip_info[ent->driver_data].name, - dev->base_addr, - dev->dev_addr[0], dev->dev_addr[1], - dev->dev_addr[2], dev->dev_addr[3], - dev->dev_addr[4], dev->dev_addr[5], dev->irq); + if (netif_msg_probe(tp)) { + printk(KERN_INFO "%s: %s at 0x%lx, " + "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, " + "IRQ %d\n", + dev->name, + rtl_chip_info[ent->driver_data].name, + dev->base_addr, + dev->dev_addr[0], dev->dev_addr[1], + dev->dev_addr[2], dev->dev_addr[3], + dev->dev_addr[4], dev->dev_addr[5], dev->irq); + } rtl8169_hw_phy_config(dev); @@ -1427,7 +1591,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) rtl8169_set_speed(dev, autoneg, speed, duplex); - if (RTL_R8(PHYstatus) & TBI_Enable) + if ((RTL_R8(PHYstatus) & TBI_Enable) && netif_msg_link(tp)) printk(KERN_INFO PFX "%s: TBI auto-negotiating\n", dev->name); return 0; @@ -1585,8 +1749,8 @@ rtl8169_hw_start(struct net_device *dev) RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); RTL_W8(EarlyTxThres, EarlyTxThld); - /* For gigabit rtl8169, MTU + header + CRC + VLAN */ - RTL_W16(RxMaxSize, tp->rx_buf_sz); + /* Low hurts. Let's disable the filtering. */ + RTL_W16(RxMaxSize, 16383); /* Set Rx Config register */ i = rtl8169_rx_config | @@ -1860,8 +2024,13 @@ static void rtl8169_reinit_task(void *_data) ret = rtl8169_open(dev); if (unlikely(ret < 0)) { if (net_ratelimit()) { - printk(PFX KERN_ERR "%s: reinit failure (status = %d)." - " Rescheduling.\n", dev->name, ret); + struct rtl8169_private *tp = netdev_priv(dev); + + if (netif_msg_drv(tp)) { + printk(PFX KERN_ERR + "%s: reinit failure (status = %d)." + " Rescheduling.\n", dev->name, ret); + } } rtl8169_schedule_work(dev, rtl8169_reinit_task); } @@ -1886,8 +2055,12 @@ static void rtl8169_reset_task(void *_data) netif_wake_queue(dev); } else { if (net_ratelimit()) { - printk(PFX KERN_EMERG "%s: Rx buffers shortage\n", - dev->name); + struct rtl8169_private *tp = netdev_priv(dev); + + if (netif_msg_intr(tp)) { + printk(PFX KERN_EMERG + "%s: Rx buffers shortage\n", dev->name); + } } rtl8169_schedule_work(dev, rtl8169_reset_task); } @@ -1973,8 +2146,11 @@ static int rtl8169_start_xmit(struct sk_buff *skb, struct net_device *dev) int ret = 0; if (unlikely(TX_BUFFS_AVAIL(tp) < skb_shinfo(skb)->nr_frags)) { - printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n", - dev->name); + if (netif_msg_drv(tp)) { + printk(KERN_ERR + "%s: BUG! Tx Ring full when queue awake!\n", + dev->name); + } goto err_stop; } @@ -2049,8 +2225,11 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev) pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd); pci_read_config_word(pdev, PCI_STATUS, &pci_status); - printk(KERN_ERR PFX "%s: PCI error (cmd = 0x%04x, status = 0x%04x).\n", - dev->name, pci_cmd, pci_status); + if (netif_msg_intr(tp)) { + printk(KERN_ERR + "%s: PCI error (cmd = 0x%04x, status = 0x%04x).\n", + dev->name, pci_cmd, pci_status); + } /* * The recovery sequence below admits a very elaborated explanation: @@ -2069,7 +2248,8 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev) /* The infamous DAC f*ckup only happens at boot time */ if ((tp->cp_cmd & PCIDAC) && !tp->dirty_rx && !tp->cur_rx) { - printk(KERN_INFO PFX "%s: disabling PCI DAC.\n", dev->name); + if (netif_msg_intr(tp)) + printk(KERN_INFO "%s: disabling PCI DAC.\n", dev->name); tp->cp_cmd &= ~PCIDAC; RTL_W16(CPlusCmd, tp->cp_cmd); dev->features &= ~NETIF_F_HIGHDMA; @@ -2127,6 +2307,11 @@ rtl8169_tx_interrupt(struct net_device *dev, struct rtl8169_private *tp, } } +static inline int rtl8169_fragmented_frame(u32 status) +{ + return (status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag); +} + static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc) { u32 opts1 = le32_to_cpu(desc->opts1); @@ -2175,29 +2360,46 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx; rx_left = rtl8169_rx_quota(rx_left, (u32) dev->quota); - while (rx_left > 0) { + for (; rx_left > 0; rx_left--, cur_rx++) { unsigned int entry = cur_rx % NUM_RX_DESC; + struct RxDesc *desc = tp->RxDescArray + entry; u32 status; rmb(); - status = le32_to_cpu(tp->RxDescArray[entry].opts1); + status = le32_to_cpu(desc->opts1); if (status & DescOwn) break; - if (status & RxRES) { - printk(KERN_INFO "%s: Rx ERROR!!!\n", dev->name); + if (unlikely(status & RxRES)) { + if (netif_msg_rx_err(tp)) { + printk(KERN_INFO + "%s: Rx ERROR. status = %08x\n", + dev->name, status); + } tp->stats.rx_errors++; if (status & (RxRWT | RxRUNT)) tp->stats.rx_length_errors++; if (status & RxCRC) tp->stats.rx_crc_errors++; + rtl8169_mark_to_asic(desc, tp->rx_buf_sz); } else { - struct RxDesc *desc = tp->RxDescArray + entry; struct sk_buff *skb = tp->Rx_skbuff[entry]; int pkt_size = (status & 0x00001FFF) - 4; void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int) = pci_dma_sync_single_for_device; + /* + * The driver does not support incoming fragmented + * frames. They are seen as a symptom of over-mtu + * sized frames. + */ + if (unlikely(rtl8169_fragmented_frame(status))) { + tp->stats.rx_dropped++; + tp->stats.rx_length_errors++; + rtl8169_mark_to_asic(desc, tp->rx_buf_sz); + continue; + } + rtl8169_rx_csum(skb, desc); pci_dma_sync_single_for_cpu(tp->pci_dev, @@ -2224,16 +2426,13 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, tp->stats.rx_bytes += pkt_size; tp->stats.rx_packets++; } - - cur_rx++; - rx_left--; } count = cur_rx - tp->cur_rx; tp->cur_rx = cur_rx; delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx); - if (!delta && count) + if (!delta && count && netif_msg_intr(tp)) printk(KERN_INFO "%s: no Rx buffer allocated\n", dev->name); tp->dirty_rx += delta; @@ -2244,7 +2443,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, * after refill ? * - how do others driver handle this condition (Uh oh...). */ - if (tp->dirty_rx + NUM_RX_DESC == tp->cur_rx) + if ((tp->dirty_rx + NUM_RX_DESC == tp->cur_rx) && netif_msg_intr(tp)) printk(KERN_EMERG "%s: Rx buffers exhausted\n", dev->name); return count; @@ -2296,7 +2495,7 @@ rtl8169_interrupt(int irq, void *dev_instance, struct pt_regs *regs) if (likely(netif_rx_schedule_prep(dev))) __netif_rx_schedule(dev); - else { + else if (netif_msg_intr(tp)) { printk(KERN_INFO "%s: interrupt %04x taken in poll\n", dev->name, status); } @@ -2315,8 +2514,10 @@ rtl8169_interrupt(int irq, void *dev_instance, struct pt_regs *regs) } while (boguscnt > 0); if (boguscnt <= 0) { - printk(KERN_WARNING "%s: Too much work at interrupt!\n", - dev->name); + if (net_ratelimit() && netif_msg_intr(tp)) { + printk(KERN_WARNING + "%s: Too much work at interrupt!\n", dev->name); + } /* Clear all interrupt sources. */ RTL_W16(IntrStatus, 0xffff); } @@ -2439,8 +2640,10 @@ rtl8169_set_rx_mode(struct net_device *dev) if (dev->flags & IFF_PROMISC) { /* Unconditionally log net taps. */ - printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", - dev->name); + if (netif_msg_link(tp)) { + printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", + dev->name); + } rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys | AcceptAllPhys; diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c index e68cf5fb492..20edeb34579 100644 --- a/drivers/net/shaper.c +++ b/drivers/net/shaper.c @@ -100,35 +100,8 @@ static int sh_debug; /* Debug flag */ #define SHAPER_BANNER "CymruNet Traffic Shaper BETA 0.04 for Linux 2.1\n" -/* - * Locking - */ - -static int shaper_lock(struct shaper *sh) -{ - /* - * Lock in an interrupt must fail - */ - while (test_and_set_bit(0, &sh->locked)) - { - if (!in_interrupt()) - sleep_on(&sh->wait_queue); - else - return 0; - - } - return 1; -} - static void shaper_kick(struct shaper *sh); -static void shaper_unlock(struct shaper *sh) -{ - clear_bit(0, &sh->locked); - wake_up(&sh->wait_queue); - shaper_kick(sh); -} - /* * Compute clocks on a buffer */ @@ -157,17 +130,15 @@ static void shaper_setspeed(struct shaper *shaper, int bitspersec) * Throw a frame at a shaper. */ -static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb) + +static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev) { + struct shaper *shaper = dev->priv; struct sk_buff *ptr; - /* - * Get ready to work on this shaper. Lock may fail if its - * an interrupt and locked. - */ - - if(!shaper_lock(shaper)) - return -1; + if (down_trylock(&shaper->sem)) + return -1; + ptr=shaper->sendq.prev; /* @@ -260,7 +231,8 @@ static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb) dev_kfree_skb(ptr); shaper->stats.collisions++; } - shaper_unlock(shaper); + shaper_kick(shaper); + up(&shaper->sem); return 0; } @@ -297,8 +269,13 @@ static void shaper_queue_xmit(struct shaper *shaper, struct sk_buff *skb) static void shaper_timer(unsigned long data) { - struct shaper *sh=(struct shaper *)data; - shaper_kick(sh); + struct shaper *shaper = (struct shaper *)data; + + if (!down_trylock(&shaper->sem)) { + shaper_kick(shaper); + up(&shaper->sem); + } else + mod_timer(&shaper->timer, jiffies); } /* @@ -311,19 +288,6 @@ static void shaper_kick(struct shaper *shaper) struct sk_buff *skb; /* - * Shaper unlock will kick - */ - - if (test_and_set_bit(0, &shaper->locked)) - { - if(sh_debug) - printk("Shaper locked.\n"); - mod_timer(&shaper->timer, jiffies); - return; - } - - - /* * Walk the list (may be empty) */ @@ -364,8 +328,6 @@ static void shaper_kick(struct shaper *shaper) if(skb!=NULL) mod_timer(&shaper->timer, SHAPERCB(skb)->shapeclock); - - clear_bit(0, &shaper->locked); } @@ -376,14 +338,12 @@ static void shaper_kick(struct shaper *shaper) static void shaper_flush(struct shaper *shaper) { struct sk_buff *skb; - if(!shaper_lock(shaper)) - { - printk(KERN_ERR "shaper: shaper_flush() called by an irq!\n"); - return; - } + + down(&shaper->sem); while((skb=skb_dequeue(&shaper->sendq))!=NULL) dev_kfree_skb(skb); - shaper_unlock(shaper); + shaper_kick(shaper); + up(&shaper->sem); } /* @@ -426,13 +386,6 @@ static int shaper_close(struct net_device *dev) * ARP and other resolutions and not before. */ - -static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct shaper *sh=dev->priv; - return shaper_qframe(sh, skb); -} - static struct net_device_stats *shaper_get_stats(struct net_device *dev) { struct shaper *sh=dev->priv; @@ -623,7 +576,6 @@ static void shaper_init_priv(struct net_device *dev) init_timer(&sh->timer); sh->timer.function=shaper_timer; sh->timer.data=(unsigned long)sh; - init_waitqueue_head(&sh->wait_queue); } /* diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index 3e9d9aab058..3107aed0fb5 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -162,6 +162,7 @@ struct sis900_private { struct mii_phy * mii; struct mii_phy * first_mii; /* record the first mii structure */ unsigned int cur_phy; + struct mii_if_info mii_info; struct timer_list timer; /* Link status detection timer. */ u8 autong_complete; /* 1: auto-negotiate complete */ @@ -203,7 +204,7 @@ static int sis900_open(struct net_device *net_dev); static int sis900_mii_probe (struct net_device * net_dev); static void sis900_init_rxfilter (struct net_device * net_dev); static u16 read_eeprom(long ioaddr, int location); -static u16 mdio_read(struct net_device *net_dev, int phy_id, int location); +static int mdio_read(struct net_device *net_dev, int phy_id, int location); static void mdio_write(struct net_device *net_dev, int phy_id, int location, int val); static void sis900_timer(unsigned long data); static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_phy); @@ -478,7 +479,13 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev, sis_priv->msg_enable = sis900_debug; else sis_priv->msg_enable = SIS900_DEF_MSG; - + + sis_priv->mii_info.dev = net_dev; + sis_priv->mii_info.mdio_read = mdio_read; + sis_priv->mii_info.mdio_write = mdio_write; + sis_priv->mii_info.phy_id_mask = 0x1f; + sis_priv->mii_info.reg_num_mask = 0x1f; + /* Get Mac address according to the chip revision */ pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &(sis_priv->chipset_rev)); if(netif_msg_probe(sis_priv)) @@ -725,6 +732,8 @@ static u16 sis900_default_phy(struct net_device * net_dev) pci_name(sis_priv->pci_dev), sis_priv->cur_phy); } + sis_priv->mii_info.phy_id = sis_priv->cur_phy; + status = mdio_read(net_dev, sis_priv->cur_phy, MII_CONTROL); status &= (~MII_CNTL_ISOLATE); @@ -852,7 +861,7 @@ static void mdio_reset(long mdio_addr) * Please see SiS7014 or ICS spec */ -static u16 mdio_read(struct net_device *net_dev, int phy_id, int location) +static int mdio_read(struct net_device *net_dev, int phy_id, int location) { long mdio_addr = net_dev->base_addr + mear; int mii_cmd = MIIread|(phy_id<<MIIpmdShift)|(location<<MIIregShift); @@ -1966,10 +1975,47 @@ static void sis900_set_msglevel(struct net_device *net_dev, u32 value) sis_priv->msg_enable = value; } +static u32 sis900_get_link(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = net_dev->priv; + return mii_link_ok(&sis_priv->mii_info); +} + +static int sis900_get_settings(struct net_device *net_dev, + struct ethtool_cmd *cmd) +{ + struct sis900_private *sis_priv = net_dev->priv; + spin_lock_irq(&sis_priv->lock); + mii_ethtool_gset(&sis_priv->mii_info, cmd); + spin_unlock_irq(&sis_priv->lock); + return 0; +} + +static int sis900_set_settings(struct net_device *net_dev, + struct ethtool_cmd *cmd) +{ + struct sis900_private *sis_priv = net_dev->priv; + int rt; + spin_lock_irq(&sis_priv->lock); + rt = mii_ethtool_sset(&sis_priv->mii_info, cmd); + spin_unlock_irq(&sis_priv->lock); + return rt; +} + +static int sis900_nway_reset(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = net_dev->priv; + return mii_nway_restart(&sis_priv->mii_info); +} + static struct ethtool_ops sis900_ethtool_ops = { .get_drvinfo = sis900_get_drvinfo, .get_msglevel = sis900_get_msglevel, .set_msglevel = sis900_set_msglevel, + .get_link = sis900_get_link, + .get_settings = sis900_get_settings, + .set_settings = sis900_set_settings, + .nway_reset = sis900_nway_reset, }; /** diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index 05b827f79f5..1ccb2989001 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -4212,7 +4212,7 @@ SK_BOOL DualNet; Flags); SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_HARD_RST); - pAC->dev[Param.Para32[0]]->flags &= ~IFF_RUNNING; + netif_carrier_off(pAC->dev[Param.Para32[0]]); spin_unlock_irqrestore( &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, Flags); @@ -4355,7 +4355,7 @@ SK_BOOL DualNet; } /* Inform the world that link protocol is up. */ - pAC->dev[Param.Para32[0]]->flags |= IFF_RUNNING; + netif_carrier_on(pAC->dev[Param.Para32[0]]); break; case SK_DRV_NET_DOWN: /* SK_U32 Reason */ @@ -4368,7 +4368,7 @@ SK_BOOL DualNet; } else { DoPrintInterfaceChange = SK_TRUE; } - pAC->dev[Param.Para32[1]]->flags &= ~IFF_RUNNING; + netif_carrier_off(pAC->dev[Param.Para32[1]]); break; case SK_DRV_SWITCH_HARD: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, @@ -4961,7 +4961,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = &SkGePollController; #endif - dev->flags &= ~IFF_RUNNING; SET_NETDEV_DEV(dev, &pdev->dev); SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); @@ -5035,7 +5034,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, dev->set_mac_address = &SkGeSetMacAddr; dev->do_ioctl = &SkGeIoctl; dev->change_mtu = &SkGeChangeMtu; - dev->flags &= ~IFF_RUNNING; SET_NETDEV_DEV(dev, &pdev->dev); SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); diff --git a/drivers/net/sk_g16.c b/drivers/net/sk_g16.c deleted file mode 100644 index 134ae0e6495..00000000000 --- a/drivers/net/sk_g16.c +++ /dev/null @@ -1,2066 +0,0 @@ -/*- - * Copyright (C) 1994 by PJD Weichmann & SWS Bern, Switzerland - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * Module : sk_g16.c - * - * Version : $Revision: 1.1 $ - * - * Author : Patrick J.D. Weichmann - * - * Date Created : 94/05/26 - * Last Updated : $Date: 1994/06/30 16:25:15 $ - * - * Description : Schneider & Koch G16 Ethernet Device Driver for - * Linux Kernel >= 1.1.22 - * Update History : - * Paul Gortmaker, 03/97: Fix for v2.1.x to use read{b,w} - * write{b,w} and memcpy -> memcpy_{to,from}io - * - * Jeff Garzik, 06/2000, Modularize - * --*/ - -static const char rcsid[] = "$Id: sk_g16.c,v 1.1 1994/06/30 16:25:15 root Exp $"; - -/* - * The Schneider & Koch (SK) G16 Network device driver is based - * on the 'ni6510' driver from Michael Hipp which can be found at - * ftp://sunsite.unc.edu/pub/Linux/system/Network/drivers/nidrivers.tar.gz - * - * Sources: 1) ni6510.c by M. Hipp - * 2) depca.c by D.C. Davies - * 3) skeleton.c by D. Becker - * 4) Am7990 Local Area Network Controller for Ethernet (LANCE), - * AMD, Pub. #05698, June 1989 - * - * Many Thanks for helping me to get things working to: - * - * A. Cox (A.Cox@swansea.ac.uk) - * M. Hipp (mhipp@student.uni-tuebingen.de) - * R. Bolz (Schneider & Koch, Germany) - * - * To Do: - * - Support of SK_G8 and other SK Network Cards. - * - Autoset memory mapped RAM. Check for free memory and then - * configure RAM correctly. - * - SK_close should really set card in to initial state. - * - Test if IRQ 3 is not switched off. Use autoirq() functionality. - * (as in /drivers/net/skeleton.c) - * - Implement Multicast addressing. At minimum something like - * in depca.c. - * - Redo the statistics part. - * - Try to find out if the board is in 8 Bit or 16 Bit slot. - * If in 8 Bit mode don't use IRQ 11. - * - (Try to make it slightly faster.) - * - Power management support - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/fcntl.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/bitops.h> - -#include <asm/system.h> -#include <asm/io.h> - -#include "sk_g16.h" - -/* - * Schneider & Koch Card Definitions - * ================================= - */ - -#define SK_NAME "SK_G16" - -/* - * SK_G16 Configuration - * -------------------- - */ - -/* - * Abbreviations - * ------------- - * - * RAM - used for the 16KB shared memory - * Boot_ROM, ROM - are used for referencing the BootEPROM - * - * SK_BOOT_ROM and SK_ADDR are symbolic constants used to configure - * the behaviour of the driver and the SK_G16. - * - * ! See sk_g16.install on how to install and configure the driver ! - * - * SK_BOOT_ROM defines if the Boot_ROM should be switched off or not. - * - * SK_ADDR defines the address where the RAM will be mapped into the real - * host memory. - * valid addresses are from 0xa0000 to 0xfc000 in 16Kbyte steps. - */ - -#define SK_BOOT_ROM 1 /* 1=BootROM on 0=off */ - -#define SK_ADDR 0xcc000 - -/* - * In POS3 are bits A14-A19 of the address bus. These bits can be set - * to choose the RAM address. That's why we only can choose the RAM address - * in 16KB steps. - */ - -#define POS_ADDR (rom_addr>>14) /* Do not change this line */ - -/* - * SK_G16 I/O PORT's + IRQ's + Boot_ROM locations - * ---------------------------------------------- - */ - -/* - * As nearly every card has also SK_G16 a specified I/O Port region and - * only a few possible IRQ's. - * In the Installation Guide from Schneider & Koch is listed a possible - * Interrupt IRQ2. IRQ2 is always IRQ9 in boards with two cascaded interrupt - * controllers. So we use in SK_IRQS IRQ9. - */ - -/* Don't touch any of the following #defines. */ - -#define SK_IO_PORTS { 0x100, 0x180, 0x208, 0x220, 0x288, 0x320, 0x328, 0x390, 0 } - -#define SK_IRQS { 3, 5, 9, 11, 0 } - -#define SK_BOOT_ROM_LOCATIONS { 0xc0000, 0xc4000, 0xc8000, 0xcc000, 0xd0000, 0xd4000, 0xd8000, 0xdc000, 0 } - -#define SK_BOOT_ROM_ID { 0x55, 0xaa, 0x10, 0x50, 0x06, 0x33 } - -/* - * SK_G16 POS REGISTERS - * -------------------- - */ - -/* - * SK_G16 has a Programmable Option Select (POS) Register. - * The POS is composed of 8 separate registers (POS0-7) which - * are I/O mapped on an address set by the W1 switch. - * - */ - -#define SK_POS_SIZE 8 /* 8 I/O Ports are used by SK_G16 */ - -#define SK_POS0 ioaddr /* Card-ID Low (R) */ -#define SK_POS1 ioaddr+1 /* Card-ID High (R) */ -#define SK_POS2 ioaddr+2 /* Card-Enable, Boot-ROM Disable (RW) */ -#define SK_POS3 ioaddr+3 /* Base address of RAM */ -#define SK_POS4 ioaddr+4 /* IRQ */ - -/* POS5 - POS7 are unused */ - -/* - * SK_G16 MAC PREFIX - * ----------------- - */ - -/* - * Scheider & Koch manufacturer code (00:00:a5). - * This must be checked, that we are sure it is a SK card. - */ - -#define SK_MAC0 0x00 -#define SK_MAC1 0x00 -#define SK_MAC2 0x5a - -/* - * SK_G16 ID - * --------- - */ - -/* - * If POS0,POS1 contain the following ID, then we know - * at which I/O Port Address we are. - */ - -#define SK_IDLOW 0xfd -#define SK_IDHIGH 0x6a - - -/* - * LANCE POS Bit definitions - * ------------------------- - */ - -#define SK_ROM_RAM_ON (POS2_CARD) -#define SK_ROM_RAM_OFF (POS2_EPROM) -#define SK_ROM_ON (inb(SK_POS2) & POS2_CARD) -#define SK_ROM_OFF (inb(SK_POS2) | POS2_EPROM) -#define SK_RAM_ON (inb(SK_POS2) | POS2_CARD) -#define SK_RAM_OFF (inb(SK_POS2) & POS2_EPROM) - -#define POS2_CARD 0x0001 /* 1 = SK_G16 on 0 = off */ -#define POS2_EPROM 0x0002 /* 1 = Boot EPROM off 0 = on */ - -/* - * SK_G16 Memory mapped Registers - * ------------------------------ - * - */ - -#define SK_IOREG (&board->ioreg) /* LANCE data registers. */ -#define SK_PORT (&board->port) /* Control, Status register */ -#define SK_IOCOM (&board->iocom) /* I/O Command */ - -/* - * SK_G16 Status/Control Register bits - * ----------------------------------- - * - * (C) Controlreg (S) Statusreg - */ - -/* - * Register transfer: 0 = no transfer - * 1 = transferring data between LANCE and I/O reg - */ -#define SK_IORUN 0x20 - -/* - * LANCE interrupt: 0 = LANCE interrupt occurred - * 1 = no LANCE interrupt occurred - */ -#define SK_IRQ 0x10 - -#define SK_RESET 0x08 /* Reset SK_CARD: 0 = RESET 1 = normal */ -#define SK_RW 0x02 /* 0 = write to 1 = read from */ -#define SK_ADR 0x01 /* 0 = REG DataPort 1 = RAP Reg addr port */ - - -#define SK_RREG SK_RW /* Transferdirection to read from lance */ -#define SK_WREG 0 /* Transferdirection to write to lance */ -#define SK_RAP SK_ADR /* Destination Register RAP */ -#define SK_RDATA 0 /* Destination Register REG DataPort */ - -/* - * SK_G16 I/O Command - * ------------------ - */ - -/* - * Any bitcombination sets the internal I/O bit (transfer will start) - * when written to I/O Command - */ - -#define SK_DOIO 0x80 /* Do Transfer */ - -/* - * LANCE RAP (Register Address Port). - * --------------------------------- - */ - -/* - * The LANCE internal registers are selected through the RAP. - * The Registers are: - * - * CSR0 - Status and Control flags - * CSR1 - Low order bits of initialize block (bits 15:00) - * CSR2 - High order bits of initialize block (bits 07:00, 15:08 are reserved) - * CSR3 - Allows redefinition of the Bus Master Interface. - * This register must be set to 0x0002, which means BSWAP = 0, - * ACON = 1, BCON = 0; - * - */ - -#define CSR0 0x00 -#define CSR1 0x01 -#define CSR2 0x02 -#define CSR3 0x03 - -/* - * General Definitions - * =================== - */ - -/* - * Set the number of Tx and Rx buffers, using Log_2(# buffers). - * We have 16KB RAM which can be accessed by the LANCE. In the - * memory are not only the buffers but also the ring descriptors and - * the initialize block. - * Don't change anything unless you really know what you do. - */ - -#define LC_LOG_TX_BUFFERS 1 /* (2 == 2^^1) 2 Transmit buffers */ -#define LC_LOG_RX_BUFFERS 3 /* (8 == 2^^3) 8 Receive buffers */ - -/* Descriptor ring sizes */ - -#define TMDNUM (1 << (LC_LOG_TX_BUFFERS)) /* 2 Transmit descriptor rings */ -#define RMDNUM (1 << (LC_LOG_RX_BUFFERS)) /* 8 Receive Buffers */ - -/* Define Mask for setting RMD, TMD length in the LANCE init_block */ - -#define TMDNUMMASK (LC_LOG_TX_BUFFERS << 29) -#define RMDNUMMASK (LC_LOG_RX_BUFFERS << 29) - -/* - * Data Buffer size is set to maximum packet length. - */ - -#define PKT_BUF_SZ 1518 - -/* - * The number of low I/O ports used by the ethercard. - */ - -#define ETHERCARD_TOTAL_SIZE SK_POS_SIZE - -/* - * SK_DEBUG - * - * Here you can choose what level of debugging wanted. - * - * If SK_DEBUG and SK_DEBUG2 are undefined, then only the - * necessary messages will be printed. - * - * If SK_DEBUG is defined, there will be many debugging prints - * which can help to find some mistakes in configuration or even - * in the driver code. - * - * If SK_DEBUG2 is defined, many many messages will be printed - * which normally you don't need. I used this to check the interrupt - * routine. - * - * (If you define only SK_DEBUG2 then only the messages for - * checking interrupts will be printed!) - * - * Normal way of live is: - * - * For the whole thing get going let both symbolic constants - * undefined. If you face any problems and you know what's going - * on (you know something about the card and you can interpret some - * hex LANCE register output) then define SK_DEBUG - * - */ - -#undef SK_DEBUG /* debugging */ -#undef SK_DEBUG2 /* debugging with more verbose report */ - -#ifdef SK_DEBUG -#define PRINTK(x) printk x -#else -#define PRINTK(x) /**/ -#endif - -#ifdef SK_DEBUG2 -#define PRINTK2(x) printk x -#else -#define PRINTK2(x) /**/ -#endif - -/* - * SK_G16 RAM - * - * The components are memory mapped and can be set in a region from - * 0x00000 through 0xfc000 in 16KB steps. - * - * The Network components are: dual ported RAM, Prom, I/O Reg, Status-, - * Controlregister and I/O Command. - * - * dual ported RAM: This is the only memory region which the LANCE chip - * has access to. From the Lance it is addressed from 0x0000 to - * 0x3fbf. The host accesses it normally. - * - * PROM: The PROM obtains the ETHERNET-MAC-Address. It is realised as a - * 8-Bit PROM, this means only the 16 even addresses are used of the - * 32 Byte Address region. Access to an odd address results in invalid - * data. - * - * LANCE I/O Reg: The I/O Reg is build of 4 single Registers, Low-Byte Write, - * Hi-Byte Write, Low-Byte Read, Hi-Byte Read. - * Transfer from or to the LANCE is always in 16Bit so Low and High - * registers are always relevant. - * - * The Data from the Readregister is not the data in the Writeregister!! - * - * Port: Status- and Controlregister. - * Two different registers which share the same address, Status is - * read-only, Control is write-only. - * - * I/O Command: - * Any bitcombination written in here starts the transmission between - * Host and LANCE. - */ - -typedef struct -{ - unsigned char ram[0x3fc0]; /* 16KB dual ported ram */ - unsigned char rom[0x0020]; /* 32Byte PROM containing 6Byte MAC */ - unsigned char res1[0x0010]; /* reserved */ - unsigned volatile short ioreg;/* LANCE I/O Register */ - unsigned volatile char port; /* Statusregister and Controlregister */ - unsigned char iocom; /* I/O Command Register */ -} SK_RAM; - -/* struct */ - -/* - * This is the structure for the dual ported ram. We - * have exactly 16 320 Bytes. In here there must be: - * - * - Initialize Block (starting at a word boundary) - * - Receive and Transmit Descriptor Rings (quadword boundary) - * - Data Buffers (arbitrary boundary) - * - * This is because LANCE has on SK_G16 only access to the dual ported - * RAM and nowhere else. - */ - -struct SK_ram -{ - struct init_block ib; - struct tmd tmde[TMDNUM]; - struct rmd rmde[RMDNUM]; - char tmdbuf[TMDNUM][PKT_BUF_SZ]; - char rmdbuf[RMDNUM][PKT_BUF_SZ]; -}; - -/* - * Structure where all necessary information is for ring buffer - * management and statistics. - */ - -struct priv -{ - struct SK_ram *ram; /* dual ported ram structure */ - struct rmd *rmdhead; /* start of receive ring descriptors */ - struct tmd *tmdhead; /* start of transmit ring descriptors */ - int rmdnum; /* actual used ring descriptor */ - int tmdnum; /* actual transmit descriptor for transmitting data */ - int tmdlast; /* last sent descriptor used for error handling, etc */ - void *rmdbufs[RMDNUM]; /* pointer to the receive buffers */ - void *tmdbufs[TMDNUM]; /* pointer to the transmit buffers */ - struct net_device_stats stats; /* Device driver statistics */ -}; - -/* global variable declaration */ - -/* IRQ map used to reserve a IRQ (see SK_open()) */ - -/* static variables */ - -static SK_RAM *board; /* pointer to our memory mapped board components */ -static DEFINE_SPINLOCK(SK_lock); - -/* Macros */ - - -/* Function Prototypes */ - -/* - * Device Driver functions - * ----------------------- - * See for short explanation of each function its definitions header. - */ - -static int SK_probe(struct net_device *dev, short ioaddr); - -static void SK_timeout(struct net_device *dev); -static int SK_open(struct net_device *dev); -static int SK_send_packet(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t SK_interrupt(int irq, void *dev_id, struct pt_regs * regs); -static void SK_rxintr(struct net_device *dev); -static void SK_txintr(struct net_device *dev); -static int SK_close(struct net_device *dev); - -static struct net_device_stats *SK_get_stats(struct net_device *dev); - -unsigned int SK_rom_addr(void); - -static void set_multicast_list(struct net_device *dev); - -/* - * LANCE Functions - * --------------- - */ - -static int SK_lance_init(struct net_device *dev, unsigned short mode); -void SK_reset_board(void); -void SK_set_RAP(int reg_number); -int SK_read_reg(int reg_number); -int SK_rread_reg(void); -void SK_write_reg(int reg_number, int value); - -/* - * Debugging functions - * ------------------- - */ - -void SK_print_pos(struct net_device *dev, char *text); -void SK_print_dev(struct net_device *dev, char *text); -void SK_print_ram(struct net_device *dev); - - -/*- - * Function : SK_init - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : Check for a SK_G16 network adaptor and initialize it. - * This function gets called by dev_init which initializes - * all Network devices. - * - * Parameters : I : struct net_device *dev - structure preconfigured - * from Space.c - * Return Value : 0 = Driver Found and initialized - * Errors : ENODEV - no device found - * ENXIO - not probed - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -static int io; /* 0 == probe */ - -/* - * Check for a network adaptor of this type, and return '0' if one exists. - * If dev->base_addr == 0, probe all likely locations. - * If dev->base_addr == 1, always return failure. - */ - -struct net_device * __init SK_init(int unit) -{ - int *port, ports[] = SK_IO_PORTS; /* SK_G16 supported ports */ - static unsigned version_printed; - struct net_device *dev = alloc_etherdev(sizeof(struct priv)); - int err = -ENODEV; - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - } - - if (version_printed++ == 0) - PRINTK(("%s: %s", SK_NAME, rcsid)); - - if (io > 0xff) { /* Check a single specified address */ - err = -EBUSY; - /* Check if on specified address is a SK_G16 */ - if (request_region(io, ETHERCARD_TOTAL_SIZE, "sk_g16")) { - err = SK_probe(dev, io); - if (!err) - goto got_it; - release_region(io, ETHERCARD_TOTAL_SIZE); - } - } else if (io > 0) { /* Don't probe at all */ - err = -ENXIO; - } else { - /* Autoprobe base_addr */ - for (port = &ports[0]; *port; port++) { - io = *port; - - /* Check if I/O Port region is used by another board */ - if (!request_region(io, ETHERCARD_TOTAL_SIZE, "sk_g16")) - continue; /* Try next Port address */ - - /* Check if at ioaddr is a SK_G16 */ - if (SK_probe(dev, io) == 0) - goto got_it; - - release_region(io, ETHERCARD_TOTAL_SIZE); - } - } -err_out: - free_netdev(dev); - return ERR_PTR(err); - -got_it: - err = register_netdev(dev); - if (err) { - release_region(dev->base_addr, ETHERCARD_TOTAL_SIZE); - goto err_out; - } - return dev; - -} /* End of SK_init */ - - -MODULE_AUTHOR("Patrick J.D. Weichmann"); -MODULE_DESCRIPTION("Schneider & Koch G16 Ethernet Device Driver"); -MODULE_LICENSE("GPL"); -MODULE_PARM(io, "i"); -MODULE_PARM_DESC(io, "0 to probe common ports (unsafe), or the I/O base of the board"); - - -#ifdef MODULE - -static struct net_device *SK_dev; - -static int __init SK_init_module (void) -{ - SK_dev = SK_init(-1); - return IS_ERR(SK_dev) ? PTR_ERR(SK_dev) : 0; -} - -static void __exit SK_cleanup_module (void) -{ - unregister_netdev(SK_dev); - release_region(SK_dev->base_addr, ETHERCARD_TOTAL_SIZE); - free_netdev(SK_dev); -} - -module_init(SK_init_module); -module_exit(SK_cleanup_module); -#endif - - -/*- - * Function : SK_probe - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : This function is called by SK_init and - * does the main part of initialization. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * I : short ioaddr - I/O Port address where POS is. - * Return Value : 0 = Initialization done - * Errors : ENODEV - No SK_G16 found - * -1 - Configuration problem - * Globals : board - pointer to SK_RAM - * Update History : - * YY/MM/DD uid Description - * 94/06/30 pwe SK_ADDR now checked and at the correct place --*/ - -int __init SK_probe(struct net_device *dev, short ioaddr) -{ - int i,j; /* Counters */ - int sk_addr_flag = 0; /* SK ADDR correct? 1 - no, 0 - yes */ - unsigned int rom_addr; /* used to store RAM address used for POS_ADDR */ - - struct priv *p = netdev_priv(dev); /* SK_G16 private structure */ - - if (inb(SK_POS0) != SK_IDLOW || inb(SK_POS1) != SK_IDHIGH) - return -ENODEV; - dev->base_addr = ioaddr; - - if (SK_ADDR & 0x3fff || SK_ADDR < 0xa0000) - { - - sk_addr_flag = 1; - - /* - * Now here we could use a routine which searches for a free - * place in the ram and set SK_ADDR if found. TODO. - */ - } - - if (SK_BOOT_ROM) /* Shall we keep Boot_ROM on ? */ - { - PRINTK(("## %s: SK_BOOT_ROM is set.\n", SK_NAME)); - - rom_addr = SK_rom_addr(); - - if (rom_addr == 0) /* No Boot_ROM found */ - { - if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */ - { - printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n", - dev->name, SK_ADDR); - return -1; - } - - rom_addr = SK_ADDR; /* assign predefined address */ - - PRINTK(("## %s: NO Bootrom found \n", SK_NAME)); - - outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */ - outb(POS_ADDR, SK_POS3); /* Set RAM address */ - outb(SK_RAM_ON, SK_POS2); /* enable RAM */ - } - else if (rom_addr == SK_ADDR) - { - printk("%s: RAM + ROM are set to the same address %#08x\n" - " Check configuration. Now switching off Boot_ROM\n", - SK_NAME, rom_addr); - - outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off*/ - outb(POS_ADDR, SK_POS3); /* Set RAM address */ - outb(SK_RAM_ON, SK_POS2); /* enable RAM */ - } - else - { - PRINTK(("## %s: Found ROM at %#08x\n", SK_NAME, rom_addr)); - PRINTK(("## %s: Keeping Boot_ROM on\n", SK_NAME)); - - if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */ - { - printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n", - dev->name, SK_ADDR); - return -1; - } - - rom_addr = SK_ADDR; - - outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */ - outb(POS_ADDR, SK_POS3); /* Set RAM address */ - outb(SK_ROM_RAM_ON, SK_POS2); /* RAM on, BOOT_ROM on */ - } - } - else /* Don't keep Boot_ROM */ - { - PRINTK(("## %s: SK_BOOT_ROM is not set.\n", SK_NAME)); - - if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */ - { - printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n", - dev->name, SK_ADDR); - return -1; - } - - rom_addr = SK_rom_addr(); /* Try to find a Boot_ROM */ - - /* IF we find a Boot_ROM disable it */ - - outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */ - - /* We found a Boot_ROM and it's gone. Set RAM address on - * Boot_ROM address. - */ - - if (rom_addr) - { - printk("%s: We found Boot_ROM at %#08x. Now setting RAM on" - "that address\n", SK_NAME, rom_addr); - - outb(POS_ADDR, SK_POS3); /* Set RAM on Boot_ROM address */ - } - else /* We did not find a Boot_ROM, use predefined SK_ADDR for ram */ - { - if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */ - { - printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n", - dev->name, SK_ADDR); - return -1; - } - - rom_addr = SK_ADDR; - - outb(POS_ADDR, SK_POS3); /* Set RAM address */ - } - outb(SK_RAM_ON, SK_POS2); /* enable RAM */ - } - -#ifdef SK_DEBUG - SK_print_pos(dev, "POS registers after ROM, RAM config"); -#endif - - board = (SK_RAM *) isa_bus_to_virt(rom_addr); - - /* Read in station address */ - for (i = 0, j = 0; i < ETH_ALEN; i++, j+=2) - { - dev->dev_addr[i] = readb(board->rom+j); - } - - /* Check for manufacturer code */ - if (!(dev->dev_addr[0] == SK_MAC0 && - dev->dev_addr[1] == SK_MAC1 && - dev->dev_addr[2] == SK_MAC2) ) - { - PRINTK(("## %s: We did not find SK_G16 at RAM location.\n", - SK_NAME)); - return -ENODEV; /* NO SK_G16 found */ - } - - printk("%s: %s found at %#3x, HW addr: %#04x:%02x:%02x:%02x:%02x:%02x\n", - dev->name, - "Schneider & Koch Netcard", - (unsigned int) dev->base_addr, - dev->dev_addr[0], - dev->dev_addr[1], - dev->dev_addr[2], - dev->dev_addr[3], - dev->dev_addr[4], - dev->dev_addr[5]); - - memset((char *) dev->priv, 0, sizeof(struct priv)); /* clear memory */ - - /* Assign our Device Driver functions */ - - dev->open = SK_open; - dev->stop = SK_close; - dev->hard_start_xmit = SK_send_packet; - dev->get_stats = SK_get_stats; - dev->set_multicast_list = set_multicast_list; - dev->tx_timeout = SK_timeout; - dev->watchdog_timeo = HZ/7; - - - dev->flags &= ~IFF_MULTICAST; - - /* Initialize private structure */ - - p->ram = (struct SK_ram *) rom_addr; /* Set dual ported RAM addr */ - p->tmdhead = &(p->ram)->tmde[0]; /* Set TMD head */ - p->rmdhead = &(p->ram)->rmde[0]; /* Set RMD head */ - - /* Initialize buffer pointers */ - - for (i = 0; i < TMDNUM; i++) - { - p->tmdbufs[i] = &(p->ram)->tmdbuf[i]; - } - - for (i = 0; i < RMDNUM; i++) - { - p->rmdbufs[i] = &(p->ram)->rmdbuf[i]; - } - -#ifdef SK_DEBUG - SK_print_pos(dev, "End of SK_probe"); - SK_print_ram(dev); -#endif - return 0; /* Initialization done */ -} /* End of SK_probe() */ - - -/*- - * Function : SK_open - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : This function is called sometimes after booting - * when ifconfig program is run. - * - * This function requests an IRQ, sets the correct - * IRQ in the card. Then calls SK_lance_init() to - * init and start the LANCE chip. Then if everything is - * ok returns with 0 (OK), which means SK_G16 is now - * opened and operational. - * - * (Called by dev_open() /net/inet/dev.c) - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * Return Value : 0 - Device opened - * Errors : -EAGAIN - Open failed - * Side Effects : None - * Update History : - * YY/MM/DD uid Description --*/ - -static int SK_open(struct net_device *dev) -{ - int i = 0; - int irqval = 0; - int ioaddr = dev->base_addr; - - int irqtab[] = SK_IRQS; - - struct priv *p = netdev_priv(dev); - - PRINTK(("## %s: At beginning of SK_open(). CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - if (dev->irq == 0) /* Autoirq */ - { - i = 0; - - /* - * Check if one IRQ out of SK_IRQS is free and install - * interrupt handler. - * Most done by request_irq(). - * irqval: 0 - interrupt handler installed for IRQ irqtab[i] - * -EBUSY - interrupt busy - * -EINVAL - irq > 15 or handler = NULL - */ - - do - { - irqval = request_irq(irqtab[i], &SK_interrupt, 0, "sk_g16", dev); - i++; - } while (irqval && irqtab[i]); - - if (irqval) /* We tried every possible IRQ but no success */ - { - printk("%s: unable to get an IRQ\n", dev->name); - return -EAGAIN; - } - - dev->irq = irqtab[--i]; - - outb(i<<2, SK_POS4); /* Set Card on probed IRQ */ - - } - else if (dev->irq == 2) /* IRQ2 is always IRQ9 */ - { - if (request_irq(9, &SK_interrupt, 0, "sk_g16", dev)) - { - printk("%s: unable to get IRQ 9\n", dev->name); - return -EAGAIN; - } - dev->irq = 9; - - /* - * Now we set card on IRQ2. - * This can be confusing, but remember that IRQ2 on the network - * card is in reality IRQ9 - */ - outb(0x08, SK_POS4); /* set card to IRQ2 */ - - } - else /* Check IRQ as defined in Space.c */ - { - int i = 0; - - /* check if IRQ free and valid. Then install Interrupt handler */ - - if (request_irq(dev->irq, &SK_interrupt, 0, "sk_g16", dev)) - { - printk("%s: unable to get selected IRQ\n", dev->name); - return -EAGAIN; - } - - switch(dev->irq) - { - case 3: i = 0; - break; - case 5: i = 1; - break; - case 2: i = 2; - break; - case 11:i = 3; - break; - default: - printk("%s: Preselected IRQ %d is invalid for %s boards", - dev->name, - dev->irq, - SK_NAME); - return -EAGAIN; - } - - outb(i<<2, SK_POS4); /* Set IRQ on card */ - } - - printk("%s: Schneider & Koch G16 at %#3x, IRQ %d, shared mem at %#08x\n", - dev->name, (unsigned int)dev->base_addr, - (int) dev->irq, (unsigned int) p->ram); - - if (!(i = SK_lance_init(dev, 0))) /* LANCE init OK? */ - { - netif_start_queue(dev); - -#ifdef SK_DEBUG - - /* - * This debug block tries to stop LANCE, - * reinit LANCE with transmitter and receiver disabled, - * then stop again and reinit with NORMAL_MODE - */ - - printk("## %s: After lance init. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0)); - SK_write_reg(CSR0, CSR0_STOP); - printk("## %s: LANCE stopped. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0)); - SK_lance_init(dev, MODE_DTX | MODE_DRX); - printk("## %s: Reinit with DTX + DRX off. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0)); - SK_write_reg(CSR0, CSR0_STOP); - printk("## %s: LANCE stopped. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0)); - SK_lance_init(dev, MODE_NORMAL); - printk("## %s: LANCE back to normal mode. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0)); - SK_print_pos(dev, "POS regs before returning OK"); - -#endif /* SK_DEBUG */ - - return 0; /* SK_open() is successful */ - } - else /* LANCE init failed */ - { - - PRINTK(("## %s: LANCE init failed: CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - return -EAGAIN; - } - -} /* End of SK_open() */ - - -/*- - * Function : SK_lance_init - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : Reset LANCE chip, fill RMD, TMD structures with - * start values and Start LANCE. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * I : int mode - put LANCE into "mode" see data-sheet for - * more info. - * Return Value : 0 - Init done - * Errors : -1 - Init failed - * Update History : - * YY/MM/DD uid Description --*/ - -static int SK_lance_init(struct net_device *dev, unsigned short mode) -{ - int i; - unsigned long flags; - struct priv *p = netdev_priv(dev); - struct tmd *tmdp; - struct rmd *rmdp; - - PRINTK(("## %s: At beginning of LANCE init. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - /* Reset LANCE */ - SK_reset_board(); - - /* Initialize TMD's with start values */ - p->tmdnum = 0; /* First descriptor for transmitting */ - p->tmdlast = 0; /* First descriptor for reading stats */ - - for (i = 0; i < TMDNUM; i++) /* Init all TMD's */ - { - tmdp = p->tmdhead + i; - - writel((unsigned long) p->tmdbufs[i], tmdp->u.buffer); /* assign buffer */ - - /* Mark TMD as start and end of packet */ - writeb(TX_STP | TX_ENP, &tmdp->u.s.status); - } - - - /* Initialize RMD's with start values */ - - p->rmdnum = 0; /* First RMD which will be used */ - - for (i = 0; i < RMDNUM; i++) /* Init all RMD's */ - { - rmdp = p->rmdhead + i; - - - writel((unsigned long) p->rmdbufs[i], rmdp->u.buffer); /* assign buffer */ - - /* - * LANCE must be owner at beginning so that he can fill in - * receiving packets, set status and release RMD - */ - - writeb(RX_OWN, &rmdp->u.s.status); - - writew(-PKT_BUF_SZ, &rmdp->blen); /* Buffer Size (two's complement) */ - - writeb(0, &rmdp->mlen); /* init message length */ - - } - - /* Fill LANCE Initialize Block */ - - writew(mode, (&((p->ram)->ib.mode))); /* Set operation mode */ - - for (i = 0; i < ETH_ALEN; i++) /* Set physical address */ - { - writeb(dev->dev_addr[i], (&((p->ram)->ib.paddr[i]))); - } - - for (i = 0; i < 8; i++) /* Set multicast, logical address */ - { - writeb(0, (&((p->ram)->ib.laddr[i]))); /* We do not use logical addressing */ - } - - /* Set ring descriptor pointers and set number of descriptors */ - - writel((int)p->rmdhead | RMDNUMMASK, (&((p->ram)->ib.rdrp))); - writel((int)p->tmdhead | TMDNUMMASK, (&((p->ram)->ib.tdrp))); - - /* Prepare LANCE Control and Status Registers */ - - spin_lock_irqsave(&SK_lock, flags); - - SK_write_reg(CSR3, CSR3_ACON); /* Ale Control !!!THIS MUST BE SET!!!! */ - - /* - * LANCE addresses the RAM from 0x0000 to 0x3fbf and has no access to - * PC Memory locations. - * - * In structure SK_ram is defined that the first thing in ram - * is the initialization block. So his address is for LANCE always - * 0x0000 - * - * CSR1 contains low order bits 15:0 of initialization block address - * CSR2 is built of: - * 7:0 High order bits 23:16 of initialization block address - * 15:8 reserved, must be 0 - */ - - /* Set initialization block address (must be on word boundary) */ - SK_write_reg(CSR1, 0); /* Set low order bits 15:0 */ - SK_write_reg(CSR2, 0); /* Set high order bits 23:16 */ - - - PRINTK(("## %s: After setting CSR1-3. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - /* Initialize LANCE */ - - /* - * INIT = Initialize, when set, causes the LANCE to begin the - * initialization procedure and access the Init Block. - */ - - SK_write_reg(CSR0, CSR0_INIT); - - spin_unlock_irqrestore(&SK_lock, flags); - - /* Wait until LANCE finished initialization */ - - SK_set_RAP(CSR0); /* Register Address Pointer to CSR0 */ - - for (i = 0; (i < 100) && !(SK_rread_reg() & CSR0_IDON); i++) - ; /* Wait until init done or go ahead if problems (i>=100) */ - - if (i >= 100) /* Something is wrong ! */ - { - printk("%s: can't init am7990, status: %04x " - "init_block: %#08x\n", - dev->name, (int) SK_read_reg(CSR0), - (unsigned int) &(p->ram)->ib); - -#ifdef SK_DEBUG - SK_print_pos(dev, "LANCE INIT failed"); - SK_print_dev(dev,"Device Structure:"); -#endif - - return -1; /* LANCE init failed */ - } - - PRINTK(("## %s: init done after %d ticks\n", SK_NAME, i)); - - /* Clear Initialize done, enable Interrupts, start LANCE */ - - SK_write_reg(CSR0, CSR0_IDON | CSR0_INEA | CSR0_STRT); - - PRINTK(("## %s: LANCE started. CSR0: %#06x\n", SK_NAME, - SK_read_reg(CSR0))); - - return 0; /* LANCE is up and running */ - -} /* End of SK_lance_init() */ - - - -/*- - * Function : SK_send_packet - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/27 - * - * Description : Writes an socket buffer into a transmit descriptor - * and starts transmission. - * - * Parameters : I : struct sk_buff *skb - packet to transfer - * I : struct net_device *dev - SK_G16 device structure - * Return Value : 0 - OK - * 1 - Could not transmit (dev_queue_xmit will queue it) - * and try to sent it later - * Globals : None - * Side Effects : None - * Update History : - * YY/MM/DD uid Description --*/ - -static void SK_timeout(struct net_device *dev) -{ - printk(KERN_WARNING "%s: xmitter timed out, try to restart!\n", dev->name); - SK_lance_init(dev, MODE_NORMAL); /* Reinit LANCE */ - netif_wake_queue(dev); /* Clear Transmitter flag */ - dev->trans_start = jiffies; /* Mark Start of transmission */ -} - -static int SK_send_packet(struct sk_buff *skb, struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); - struct tmd *tmdp; - static char pad[64]; - - PRINTK2(("## %s: SK_send_packet() called, CSR0 %#04x.\n", - SK_NAME, SK_read_reg(CSR0))); - - - /* - * Block a timer-based transmit from overlapping. - * This means check if we are already in. - */ - - netif_stop_queue (dev); - - { - - /* Evaluate Packet length */ - short len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; - - tmdp = p->tmdhead + p->tmdnum; /* Which descriptor for transmitting */ - - /* Fill in Transmit Message Descriptor */ - - /* Copy data into dual ported ram */ - - memcpy_toio((tmdp->u.buffer & 0x00ffffff), skb->data, skb->len); - if (len != skb->len) - memcpy_toio((tmdp->u.buffer & 0x00ffffff) + skb->len, pad, len-skb->len); - - writew(-len, &tmdp->blen); /* set length to transmit */ - - /* - * Packet start and end is always set because we use the maximum - * packet length as buffer length. - * Relinquish ownership to LANCE - */ - - writeb(TX_OWN | TX_STP | TX_ENP, &tmdp->u.s.status); - - /* Start Demand Transmission */ - SK_write_reg(CSR0, CSR0_TDMD | CSR0_INEA); - - dev->trans_start = jiffies; /* Mark start of transmission */ - - /* Set pointer to next transmit buffer */ - p->tmdnum++; - p->tmdnum &= TMDNUM-1; - - /* Do we own the next transmit buffer ? */ - if (! (readb(&((p->tmdhead + p->tmdnum)->u.s.status)) & TX_OWN) ) - { - /* - * We own next buffer and are ready to transmit, so - * clear busy flag - */ - netif_start_queue(dev); - } - - p->stats.tx_bytes += skb->len; - - } - - dev_kfree_skb(skb); - return 0; -} /* End of SK_send_packet */ - - -/*- - * Function : SK_interrupt - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/27 - * - * Description : SK_G16 interrupt handler which checks for LANCE - * Errors, handles transmit and receive interrupts - * - * Parameters : I : int irq, void *dev_id, struct pt_regs * regs - - * Return Value : None - * Errors : None - * Globals : None - * Side Effects : None - * Update History : - * YY/MM/DD uid Description --*/ - -static irqreturn_t SK_interrupt(int irq, void *dev_id, struct pt_regs * regs) -{ - int csr0; - struct net_device *dev = dev_id; - struct priv *p = netdev_priv(dev); - - - PRINTK2(("## %s: SK_interrupt(). status: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - if (dev == NULL) - { - printk("SK_interrupt(): IRQ %d for unknown device.\n", irq); - } - - spin_lock (&SK_lock); - - csr0 = SK_read_reg(CSR0); /* store register for checking */ - - /* - * Acknowledge all of the current interrupt sources, disable - * Interrupts (INEA = 0) - */ - - SK_write_reg(CSR0, csr0 & CSR0_CLRALL); - - if (csr0 & CSR0_ERR) /* LANCE Error */ - { - printk("%s: error: %04x\n", dev->name, csr0); - - if (csr0 & CSR0_MISS) /* No place to store packet ? */ - { - p->stats.rx_dropped++; - } - } - - if (csr0 & CSR0_RINT) /* Receive Interrupt (packet arrived) */ - { - SK_rxintr(dev); - } - - if (csr0 & CSR0_TINT) /* Transmit interrupt (packet sent) */ - { - SK_txintr(dev); - } - - SK_write_reg(CSR0, CSR0_INEA); /* Enable Interrupts */ - - spin_unlock (&SK_lock); - return IRQ_HANDLED; -} /* End of SK_interrupt() */ - - -/*- - * Function : SK_txintr - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/27 - * - * Description : After sending a packet we check status, update - * statistics and relinquish ownership of transmit - * descriptor ring. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * Return Value : None - * Errors : None - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -static void SK_txintr(struct net_device *dev) -{ - int tmdstat; - struct tmd *tmdp; - struct priv *p = netdev_priv(dev); - - - PRINTK2(("## %s: SK_txintr() status: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - tmdp = p->tmdhead + p->tmdlast; /* Which buffer we sent at last ? */ - - /* Set next buffer */ - p->tmdlast++; - p->tmdlast &= TMDNUM-1; - - tmdstat = readb(&tmdp->u.s.status); - - /* - * We check status of transmitted packet. - * see LANCE data-sheet for error explanation - */ - if (tmdstat & TX_ERR) /* Error occurred */ - { - int stat2 = readw(&tmdp->status2); - - printk("%s: TX error: %04x %04x\n", dev->name, tmdstat, stat2); - - if (stat2 & TX_TDR) /* TDR problems? */ - { - printk("%s: tdr-problems \n", dev->name); - } - - if (stat2 & TX_RTRY) /* Failed in 16 attempts to transmit ? */ - p->stats.tx_aborted_errors++; - if (stat2 & TX_LCOL) /* Late collision ? */ - p->stats.tx_window_errors++; - if (stat2 & TX_LCAR) /* Loss of Carrier ? */ - p->stats.tx_carrier_errors++; - if (stat2 & TX_UFLO) /* Underflow error ? */ - { - p->stats.tx_fifo_errors++; - - /* - * If UFLO error occurs it will turn transmitter of. - * So we must reinit LANCE - */ - - SK_lance_init(dev, MODE_NORMAL); - } - - p->stats.tx_errors++; - - writew(0, &tmdp->status2); /* Clear error flags */ - } - else if (tmdstat & TX_MORE) /* Collisions occurred ? */ - { - /* - * Here I have a problem. - * I only know that there must be one or up to 15 collisions. - * That's why TX_MORE is set, because after 16 attempts TX_RTRY - * will be set which means couldn't send packet aborted transfer. - * - * First I did not have this in but then I thought at minimum - * we see that something was not ok. - * If anyone knows something better than this to handle this - * please report it. - */ - - p->stats.collisions++; - } - else /* Packet sent without any problems */ - { - p->stats.tx_packets++; - } - - /* - * We mark transmitter not busy anymore, because now we have a free - * transmit descriptor which can be filled by SK_send_packet and - * afterwards sent by the LANCE - * - * The function which do handle slow IRQ parts is do_bottom_half() - * which runs at normal kernel priority, that means all interrupt are - * enabled. (see kernel/irq.c) - * - * net_bh does something like this: - * - check if already in net_bh - * - try to transmit something from the send queue - * - if something is in the receive queue send it up to higher - * levels if it is a known protocol - * - try to transmit something from the send queue - */ - - netif_wake_queue(dev); - -} /* End of SK_txintr() */ - - -/*- - * Function : SK_rxintr - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/27 - * - * Description : Buffer sent, check for errors, relinquish ownership - * of the receive message descriptor. - * - * Parameters : I : SK_G16 device structure - * Return Value : None - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -static void SK_rxintr(struct net_device *dev) -{ - - struct rmd *rmdp; - int rmdstat; - struct priv *p = netdev_priv(dev); - - PRINTK2(("## %s: SK_rxintr(). CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - rmdp = p->rmdhead + p->rmdnum; - - /* As long as we own the next entry, check status and send - * it up to higher layer - */ - - while (!( (rmdstat = readb(&rmdp->u.s.status)) & RX_OWN)) - { - /* - * Start and end of packet must be set, because we use - * the ethernet maximum packet length (1518) as buffer size. - * - * Because our buffers are at maximum OFLO and BUFF errors are - * not to be concerned (see Data sheet) - */ - - if ((rmdstat & (RX_STP | RX_ENP)) != (RX_STP | RX_ENP)) - { - /* Start of a frame > 1518 Bytes ? */ - - if (rmdstat & RX_STP) - { - p->stats.rx_errors++; /* bad packet received */ - p->stats.rx_length_errors++; /* packet too long */ - - printk("%s: packet too long\n", dev->name); - } - - /* - * All other packets will be ignored until a new frame with - * start (RX_STP) set follows. - * - * What we do is just give descriptor free for new incoming - * packets. - */ - - writeb(RX_OWN, &rmdp->u.s.status); /* Relinquish ownership to LANCE */ - - } - else if (rmdstat & RX_ERR) /* Receive Error ? */ - { - printk("%s: RX error: %04x\n", dev->name, (int) rmdstat); - - p->stats.rx_errors++; - - if (rmdstat & RX_FRAM) p->stats.rx_frame_errors++; - if (rmdstat & RX_CRC) p->stats.rx_crc_errors++; - - writeb(RX_OWN, &rmdp->u.s.status); /* Relinquish ownership to LANCE */ - - } - else /* We have a packet which can be queued for the upper layers */ - { - - int len = readw(&rmdp->mlen) & 0x0fff; /* extract message length from receive buffer */ - struct sk_buff *skb; - - skb = dev_alloc_skb(len+2); /* allocate socket buffer */ - - if (skb == NULL) /* Could not get mem ? */ - { - - /* - * Couldn't allocate sk_buffer so we give descriptor back - * to Lance, update statistics and go ahead. - */ - - writeb(RX_OWN, &rmdp->u.s.status); /* Relinquish ownership to LANCE */ - printk("%s: Couldn't allocate sk_buff, deferring packet.\n", - dev->name); - p->stats.rx_dropped++; - - break; /* Jump out */ - } - - /* Prepare sk_buff to queue for upper layers */ - - skb->dev = dev; - skb_reserve(skb,2); /* Align IP header on 16 byte boundary */ - - /* - * Copy data out of our receive descriptor into sk_buff. - * - * (rmdp->u.buffer & 0x00ffffff) -> get address of buffer and - * ignore status fields) - */ - - memcpy_fromio(skb_put(skb,len), (rmdp->u.buffer & 0x00ffffff), len); - - - /* - * Notify the upper protocol layers that there is another packet - * to handle - * - * netif_rx() always succeeds. see /net/inet/dev.c for more. - */ - - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); /* queue packet and mark it for processing */ - - /* - * Packet is queued and marked for processing so we - * free our descriptor and update statistics - */ - - writeb(RX_OWN, &rmdp->u.s.status); - dev->last_rx = jiffies; - p->stats.rx_packets++; - p->stats.rx_bytes += len; - - - p->rmdnum++; - p->rmdnum %= RMDNUM; - - rmdp = p->rmdhead + p->rmdnum; - } - } -} /* End of SK_rxintr() */ - - -/*- - * Function : SK_close - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : close gets called from dev_close() and should - * deinstall the card (free_irq, mem etc). - * - * Parameters : I : struct net_device *dev - our device structure - * Return Value : 0 - closed device driver - * Errors : None - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -/* I have tried to set BOOT_ROM on and RAM off but then, after a 'ifconfig - * down' the system stops. So I don't shut set card to init state. - */ - -static int SK_close(struct net_device *dev) -{ - - PRINTK(("## %s: SK_close(). CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - netif_stop_queue(dev); /* Transmitter busy */ - - printk("%s: Shutting %s down CSR0 %#06x\n", dev->name, SK_NAME, - (int) SK_read_reg(CSR0)); - - SK_write_reg(CSR0, CSR0_STOP); /* STOP the LANCE */ - - free_irq(dev->irq, dev); /* Free IRQ */ - - return 0; /* always succeed */ - -} /* End of SK_close() */ - - -/*- - * Function : SK_get_stats - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : Return current status structure to upper layers. - * It is called by sprintf_stats (dev.c). - * - * Parameters : I : struct net_device *dev - our device structure - * Return Value : struct net_device_stats * - our current statistics - * Errors : None - * Side Effects : None - * Update History : - * YY/MM/DD uid Description --*/ - -static struct net_device_stats *SK_get_stats(struct net_device *dev) -{ - - struct priv *p = netdev_priv(dev); - - PRINTK(("## %s: SK_get_stats(). CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - return &p->stats; /* Return Device status */ - -} /* End of SK_get_stats() */ - - -/*- - * Function : set_multicast_list - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : This function gets called when a program performs - * a SIOCSIFFLAGS call. Ifconfig does this if you call - * 'ifconfig [-]allmulti' which enables or disables the - * Promiscuous mode. - * Promiscuous mode is when the Network card accepts all - * packets, not only the packets which match our MAC - * Address. It is useful for writing a network monitor, - * but it is also a security problem. You have to remember - * that all information on the net is not encrypted. - * - * Parameters : I : struct net_device *dev - SK_G16 device Structure - * Return Value : None - * Errors : None - * Globals : None - * Update History : - * YY/MM/DD uid Description - * 95/10/18 ACox New multicast calling scheme --*/ - - -/* Set or clear the multicast filter for SK_G16. - */ - -static void set_multicast_list(struct net_device *dev) -{ - - if (dev->flags&IFF_PROMISC) - { - /* Reinitialize LANCE with MODE_PROM set */ - SK_lance_init(dev, MODE_PROM); - } - else if (dev->mc_count==0 && !(dev->flags&IFF_ALLMULTI)) - { - /* Reinitialize LANCE without MODE_PROM */ - SK_lance_init(dev, MODE_NORMAL); - } - else - { - /* Multicast with logical address filter on */ - /* Reinitialize LANCE without MODE_PROM */ - SK_lance_init(dev, MODE_NORMAL); - - /* Not implemented yet. */ - } -} /* End of set_multicast_list() */ - - - -/*- - * Function : SK_rom_addr - * Author : Patrick J.D. Weichmann - * Date Created : 94/06/01 - * - * Description : Try to find a Boot_ROM at all possible locations - * - * Parameters : None - * Return Value : Address where Boot_ROM is - * Errors : 0 - Did not find Boot_ROM - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -unsigned int __init SK_rom_addr(void) -{ - int i,j; - int rom_found = 0; - unsigned int rom_location[] = SK_BOOT_ROM_LOCATIONS; - unsigned char rom_id[] = SK_BOOT_ROM_ID; - unsigned char test_byte; - - /* Autodetect Boot_ROM */ - PRINTK(("## %s: Autodetection of Boot_ROM\n", SK_NAME)); - - for (i = 0; (rom_location[i] != 0) && (rom_found == 0); i++) - { - - PRINTK(("## Trying ROM location %#08x", rom_location[i])); - - rom_found = 1; - for (j = 0; j < 6; j++) - { - test_byte = readb(rom_location[i]+j); - PRINTK((" %02x ", *test_byte)); - - if(test_byte != rom_id[j]) - { - rom_found = 0; - } - } - PRINTK(("\n")); - } - - if (rom_found == 1) - { - PRINTK(("## %s: Boot_ROM found at %#08x\n", - SK_NAME, rom_location[(i-1)])); - - return (rom_location[--i]); - } - else - { - PRINTK(("%s: No Boot_ROM found\n", SK_NAME)); - return 0; - } -} /* End of SK_rom_addr() */ - - - -/* LANCE access functions - * - * ! CSR1-3 can only be accessed when in CSR0 the STOP bit is set ! - */ - - -/*- - * Function : SK_reset_board - * - * Author : Patrick J.D. Weichmann - * - * Date Created : 94/05/25 - * - * Description : This function resets SK_G16 and all components, but - * POS registers are not changed - * - * Parameters : None - * Return Value : None - * Errors : None - * Globals : SK_RAM *board - SK_RAM structure pointer - * - * Update History : - * YY/MM/DD uid Description --*/ - -void SK_reset_board(void) -{ - writeb(0x00, SK_PORT); /* Reset active */ - mdelay(5); /* Delay min 5ms */ - writeb(SK_RESET, SK_PORT); /* Set back to normal operation */ - -} /* End of SK_reset_board() */ - - -/*- - * Function : SK_set_RAP - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/25 - * - * Description : Set LANCE Register Address Port to register - * for later data transfer. - * - * Parameters : I : reg_number - which CSR to read/write from/to - * Return Value : None - * Errors : None - * Globals : SK_RAM *board - SK_RAM structure pointer - * Update History : - * YY/MM/DD uid Description --*/ - -void SK_set_RAP(int reg_number) -{ - writew(reg_number, SK_IOREG); - writeb(SK_RESET | SK_RAP | SK_WREG, SK_PORT); - writeb(SK_DOIO, SK_IOCOM); - - while (readb(SK_PORT) & SK_IORUN) - barrier(); -} /* End of SK_set_RAP() */ - - -/*- - * Function : SK_read_reg - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/25 - * - * Description : Set RAP and read data from a LANCE CSR register - * - * Parameters : I : reg_number - which CSR to read from - * Return Value : Register contents - * Errors : None - * Globals : SK_RAM *board - SK_RAM structure pointer - * Update History : - * YY/MM/DD uid Description --*/ - -int SK_read_reg(int reg_number) -{ - SK_set_RAP(reg_number); - - writeb(SK_RESET | SK_RDATA | SK_RREG, SK_PORT); - writeb(SK_DOIO, SK_IOCOM); - - while (readb(SK_PORT) & SK_IORUN) - barrier(); - return (readw(SK_IOREG)); - -} /* End of SK_read_reg() */ - - -/*- - * Function : SK_rread_reg - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/28 - * - * Description : Read data from preseted register. - * This function requires that you know which - * Register is actually set. Be aware that CSR1-3 - * can only be accessed when in CSR0 STOP is set. - * - * Return Value : Register contents - * Errors : None - * Globals : SK_RAM *board - SK_RAM structure pointer - * Update History : - * YY/MM/DD uid Description --*/ - -int SK_rread_reg(void) -{ - writeb(SK_RESET | SK_RDATA | SK_RREG, SK_PORT); - - writeb(SK_DOIO, SK_IOCOM); - - while (readb(SK_PORT) & SK_IORUN) - barrier(); - return (readw(SK_IOREG)); - -} /* End of SK_rread_reg() */ - - -/*- - * Function : SK_write_reg - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/25 - * - * Description : This function sets the RAP then fills in the - * LANCE I/O Reg and starts Transfer to LANCE. - * It waits until transfer has ended which is max. 7 ms - * and then it returns. - * - * Parameters : I : reg_number - which CSR to write to - * I : value - what value to fill into register - * Return Value : None - * Errors : None - * Globals : SK_RAM *board - SK_RAM structure pointer - * Update History : - * YY/MM/DD uid Description --*/ - -void SK_write_reg(int reg_number, int value) -{ - SK_set_RAP(reg_number); - - writew(value, SK_IOREG); - writeb(SK_RESET | SK_RDATA | SK_WREG, SK_PORT); - writeb(SK_DOIO, SK_IOCOM); - - while (readb(SK_PORT) & SK_IORUN) - barrier(); -} /* End of SK_write_reg */ - - - -/* - * Debugging functions - * ------------------- - */ - -/*- - * Function : SK_print_pos - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/25 - * - * Description : This function prints out the 4 POS (Programmable - * Option Select) Registers. Used mainly to debug operation. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * I : char * - Text which will be printed as title - * Return Value : None - * Errors : None - * Update History : - * YY/MM/DD uid Description --*/ - -void SK_print_pos(struct net_device *dev, char *text) -{ - int ioaddr = dev->base_addr; - - unsigned char pos0 = inb(SK_POS0), - pos1 = inb(SK_POS1), - pos2 = inb(SK_POS2), - pos3 = inb(SK_POS3), - pos4 = inb(SK_POS4); - - - printk("## %s: %s.\n" - "## pos0=%#4x pos1=%#4x pos2=%#04x pos3=%#08x pos4=%#04x\n", - SK_NAME, text, pos0, pos1, pos2, (pos3<<14), pos4); - -} /* End of SK_print_pos() */ - - - -/*- - * Function : SK_print_dev - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/25 - * - * Description : This function simply prints out the important fields - * of the device structure. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * I : char *text - Title for printing - * Return Value : None - * Errors : None - * Update History : - * YY/MM/DD uid Description --*/ - -void SK_print_dev(struct net_device *dev, char *text) -{ - if (dev == NULL) - { - printk("## %s: Device Structure. %s\n", SK_NAME, text); - printk("## DEVICE == NULL\n"); - } - else - { - printk("## %s: Device Structure. %s\n", SK_NAME, text); - printk("## Device Name: %s Base Address: %#06lx IRQ: %d\n", - dev->name, dev->base_addr, dev->irq); - - printk("## next device: %#08x init function: %#08x\n", - (int) dev->next, (int) dev->init); - } - -} /* End of SK_print_dev() */ - - - -/*- - * Function : SK_print_ram - * Author : Patrick J.D. Weichmann - * Date Created : 94/06/02 - * - * Description : This function is used to check how are things set up - * in the 16KB RAM. Also the pointers to the receive and - * transmit descriptor rings and rx and tx buffers locations. - * It contains a minor bug in printing, but has no effect to the values - * only newlines are not correct. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * Return Value : None - * Errors : None - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -void __init SK_print_ram(struct net_device *dev) -{ - - int i; - struct priv *p = netdev_priv(dev); - - printk("## %s: RAM Details.\n" - "## RAM at %#08x tmdhead: %#08x rmdhead: %#08x initblock: %#08x\n", - SK_NAME, - (unsigned int) p->ram, - (unsigned int) p->tmdhead, - (unsigned int) p->rmdhead, - (unsigned int) &(p->ram)->ib); - - printk("## "); - - for(i = 0; i < TMDNUM; i++) - { - if (!(i % 3)) /* Every third line do a newline */ - { - printk("\n## "); - } - printk("tmdbufs%d: %#08x ", (i+1), (int) p->tmdbufs[i]); - } - printk("## "); - - for(i = 0; i < RMDNUM; i++) - { - if (!(i % 3)) /* Every third line do a newline */ - { - printk("\n## "); - } - printk("rmdbufs%d: %#08x ", (i+1), (int) p->rmdbufs[i]); - } - printk("\n"); - -} /* End of SK_print_ram() */ - diff --git a/drivers/net/sk_g16.h b/drivers/net/sk_g16.h deleted file mode 100644 index 0a5dc0908a0..00000000000 --- a/drivers/net/sk_g16.h +++ /dev/null @@ -1,165 +0,0 @@ -/*- - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * Module : sk_g16.h - * Version : $Revision$ - * - * Author : M.Hipp (mhipp@student.uni-tuebingen.de) - * changes by : Patrick J.D. Weichmann - * - * Date Created : 94/05/25 - * - * Description : In here are all necessary definitions of - * the am7990 (LANCE) chip used for writing a - * network device driver which uses this chip - * - * $Log$ --*/ - -#ifndef SK_G16_H - -#define SK_G16_H - - -/* - * Control and Status Register 0 (CSR0) bit definitions - * - * (R=Readable) (W=Writeable) (S=Set on write) (C-Clear on write) - * - */ - -#define CSR0_ERR 0x8000 /* Error summary (R) */ -#define CSR0_BABL 0x4000 /* Babble transmitter timeout error (RC) */ -#define CSR0_CERR 0x2000 /* Collision Error (RC) */ -#define CSR0_MISS 0x1000 /* Missed packet (RC) */ -#define CSR0_MERR 0x0800 /* Memory Error (RC) */ -#define CSR0_RINT 0x0400 /* Receiver Interrupt (RC) */ -#define CSR0_TINT 0x0200 /* Transmit Interrupt (RC) */ -#define CSR0_IDON 0x0100 /* Initialization Done (RC) */ -#define CSR0_INTR 0x0080 /* Interrupt Flag (R) */ -#define CSR0_INEA 0x0040 /* Interrupt Enable (RW) */ -#define CSR0_RXON 0x0020 /* Receiver on (R) */ -#define CSR0_TXON 0x0010 /* Transmitter on (R) */ -#define CSR0_TDMD 0x0008 /* Transmit Demand (RS) */ -#define CSR0_STOP 0x0004 /* Stop (RS) */ -#define CSR0_STRT 0x0002 /* Start (RS) */ -#define CSR0_INIT 0x0001 /* Initialize (RS) */ - -#define CSR0_CLRALL 0x7f00 /* mask for all clearable bits */ - -/* - * Control and Status Register 3 (CSR3) bit definitions - * - */ - -#define CSR3_BSWAP 0x0004 /* Byte Swap (RW) */ -#define CSR3_ACON 0x0002 /* ALE Control (RW) */ -#define CSR3_BCON 0x0001 /* Byte Control (RW) */ - -/* - * Initialization Block Mode operation Bit Definitions. - */ - -#define MODE_PROM 0x8000 /* Promiscuous Mode */ -#define MODE_INTL 0x0040 /* Internal Loopback */ -#define MODE_DRTY 0x0020 /* Disable Retry */ -#define MODE_COLL 0x0010 /* Force Collision */ -#define MODE_DTCR 0x0008 /* Disable Transmit CRC) */ -#define MODE_LOOP 0x0004 /* Loopback */ -#define MODE_DTX 0x0002 /* Disable the Transmitter */ -#define MODE_DRX 0x0001 /* Disable the Receiver */ - -#define MODE_NORMAL 0x0000 /* Normal operation mode */ - -/* - * Receive message descriptor status bit definitions. - */ - -#define RX_OWN 0x80 /* Owner bit 0 = host, 1 = lance */ -#define RX_ERR 0x40 /* Error Summary */ -#define RX_FRAM 0x20 /* Framing Error */ -#define RX_OFLO 0x10 /* Overflow Error */ -#define RX_CRC 0x08 /* CRC Error */ -#define RX_BUFF 0x04 /* Buffer Error */ -#define RX_STP 0x02 /* Start of Packet */ -#define RX_ENP 0x01 /* End of Packet */ - - -/* - * Transmit message descriptor status bit definitions. - */ - -#define TX_OWN 0x80 /* Owner bit 0 = host, 1 = lance */ -#define TX_ERR 0x40 /* Error Summary */ -#define TX_MORE 0x10 /* More the 1 retry needed to Xmit */ -#define TX_ONE 0x08 /* One retry needed to Xmit */ -#define TX_DEF 0x04 /* Deferred */ -#define TX_STP 0x02 /* Start of Packet */ -#define TX_ENP 0x01 /* End of Packet */ - -/* - * Transmit status (2) (valid if TX_ERR == 1) - */ - -#define TX_BUFF 0x8000 /* Buffering error (no ENP) */ -#define TX_UFLO 0x4000 /* Underflow (late memory) */ -#define TX_LCOL 0x1000 /* Late collision */ -#define TX_LCAR 0x0400 /* Loss of Carrier */ -#define TX_RTRY 0x0200 /* Failed after 16 retransmissions */ -#define TX_TDR 0x003f /* Time-domain-reflectometer-value */ - - -/* - * Structures used for Communication with the LANCE - */ - -/* LANCE Initialize Block */ - -struct init_block -{ - unsigned short mode; /* Mode Register */ - unsigned char paddr[6]; /* Physical Address (MAC) */ - unsigned char laddr[8]; /* Logical Filter Address (not used) */ - unsigned int rdrp; /* Receive Descriptor Ring pointer */ - unsigned int tdrp; /* Transmit Descriptor Ring pointer */ -}; - - -/* Receive Message Descriptor Entry */ - -struct rmd -{ - union - { - unsigned long buffer; /* Address of buffer */ - struct - { - unsigned char unused[3]; - unsigned volatile char status; /* Status Bits */ - } s; - } u; - volatile short blen; /* Buffer Length (two's complement) */ - unsigned short mlen; /* Message Byte Count */ -}; - - -/* Transmit Message Descriptor Entry */ - -struct tmd -{ - union - { - unsigned long buffer; /* Address of buffer */ - struct - { - unsigned char unused[3]; - unsigned volatile char status; /* Status Bits */ - } s; - } u; - unsigned short blen; /* Buffer Length (two's complement) */ - unsigned volatile short status2; /* Error Status Bits */ -}; - -#endif /* End of SK_G16_H */ diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 5e561ba4433..fd80048f7f7 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -129,7 +129,7 @@ MODULE_PARM_DESC(nowait, "set to 1 for no wait state"); /* * Transmit timeout, default 5 seconds. */ -static int watchdog = 5000; +static int watchdog = 1000; module_param(watchdog, int, 0400); MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds"); @@ -660,15 +660,14 @@ static void smc_hardware_send_pkt(unsigned long data) SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG); /* - * If THROTTLE_TX_PKTS is set, we look at the TX_EMPTY flag - * before queueing this packet for TX, and if it's clear then - * we stop the queue here. This will have the effect of - * having at most 2 packets queued for TX in the chip's memory - * at all time. If THROTTLE_TX_PKTS is not set then the queue - * is stopped only when memory allocation (MC_ALLOC) does not - * succeed right away. + * If THROTTLE_TX_PKTS is set, we stop the queue here. This will + * have the effect of having at most one packet queued for TX + * in the chip's memory at all time. + * + * If THROTTLE_TX_PKTS is not set then the queue is stopped only + * when memory allocation (MC_ALLOC) does not succeed right away. */ - if (THROTTLE_TX_PKTS && !(SMC_GET_INT() & IM_TX_EMPTY_INT)) + if (THROTTLE_TX_PKTS) netif_stop_queue(dev); /* queue the packet for TX */ @@ -792,17 +791,20 @@ static void smc_tx(struct net_device *dev) DBG(2, "%s: TX STATUS 0x%04x PNR 0x%02x\n", dev->name, tx_status, packet_no); - if (!(tx_status & TS_SUCCESS)) + if (!(tx_status & ES_TX_SUC)) lp->stats.tx_errors++; - if (tx_status & TS_LOSTCAR) + + if (tx_status & ES_LOSTCARR) lp->stats.tx_carrier_errors++; - if (tx_status & TS_LATCOL) { - PRINTK("%s: late collision occurred on last xmit\n", dev->name); + if (tx_status & (ES_LATCOL | ES_16COL)) { + PRINTK("%s: %s occurred on last xmit\n", dev->name, + (tx_status & ES_LATCOL) ? + "late collision" : "too many collisions"); lp->stats.tx_window_errors++; if (!(lp->stats.tx_window_errors & 63) && net_ratelimit()) { - printk(KERN_INFO "%s: unexpectedly large numbers of " - "late collisions. Please check duplex " + printk(KERN_INFO "%s: unexpectedly large number of " + "bad collisions. Please check duplex " "setting.\n", dev->name); } } @@ -1236,7 +1238,7 @@ static void smc_10bt_check_media(struct net_device *dev, int init) old_carrier = netif_carrier_ok(dev) ? 1 : 0; SMC_SELECT_BANK(0); - new_carrier = SMC_inw(ioaddr, EPH_STATUS_REG) & ES_LINK_OK ? 1 : 0; + new_carrier = (SMC_GET_EPH_STATUS() & ES_LINK_OK) ? 1 : 0; SMC_SELECT_BANK(2); if (init || (old_carrier != new_carrier)) { @@ -1308,15 +1310,16 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (!status) break; - if (status & IM_RCV_INT) { - DBG(3, "%s: RX irq\n", dev->name); - smc_rcv(dev); - } else if (status & IM_TX_INT) { + if (status & IM_TX_INT) { + /* do this before RX as it will free memory quickly */ DBG(3, "%s: TX int\n", dev->name); smc_tx(dev); SMC_ACK_INT(IM_TX_INT); if (THROTTLE_TX_PKTS) netif_wake_queue(dev); + } else if (status & IM_RCV_INT) { + DBG(3, "%s: RX irq\n", dev->name); + smc_rcv(dev); } else if (status & IM_ALLOC_INT) { DBG(3, "%s: Allocation irq\n", dev->name); tasklet_hi_schedule(&lp->tx_task); @@ -1337,7 +1340,10 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* multiple collisions */ lp->stats.collisions += card_stats & 0xF; } else if (status & IM_RX_OVRN_INT) { - DBG(1, "%s: RX overrun\n", dev->name); + DBG(1, "%s: RX overrun (EPH_ST 0x%04x)\n", dev->name, + ({ int eph_st; SMC_SELECT_BANK(0); + eph_st = SMC_GET_EPH_STATUS(); + SMC_SELECT_BANK(2); eph_st; }) ); SMC_ACK_INT(IM_RX_OVRN_INT); lp->stats.rx_errors++; lp->stats.rx_fifo_errors++; @@ -1389,7 +1395,7 @@ static void smc_timeout(struct net_device *dev) { struct smc_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->base; - int status, mask, meminfo, fifo; + int status, mask, eph_st, meminfo, fifo; DBG(2, "%s: %s\n", dev->name, __FUNCTION__); @@ -1398,11 +1404,13 @@ static void smc_timeout(struct net_device *dev) mask = SMC_GET_INT_MASK(); fifo = SMC_GET_FIFO(); SMC_SELECT_BANK(0); + eph_st = SMC_GET_EPH_STATUS(); meminfo = SMC_GET_MIR(); SMC_SELECT_BANK(2); spin_unlock_irq(&lp->lock); - PRINTK( "%s: INT 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n", - dev->name, status, mask, meminfo, fifo ); + PRINTK( "%s: TX timeout (INT 0x%02x INTMASK 0x%02x " + "MEM 0x%04x FIFO 0x%04x EPH_ST 0x%04x)\n", + dev->name, status, mask, meminfo, fifo, eph_st ); smc_reset(dev); smc_enable(dev); @@ -1863,7 +1871,7 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr) SMC_SELECT_BANK(1); val = SMC_GET_BASE(); val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT; - if (((unsigned long)ioaddr & ((PAGE_SIZE-1)<<SMC_IO_SHIFT)) != val) { /*XXX: WTF? */ + if (((unsigned int)ioaddr & (0x3e0 << SMC_IO_SHIFT)) != val) { printk("%s: IOADDR %p doesn't match configuration (%x).\n", CARDNAME, ioaddr, val); } diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index ddd2688e7d3..946528e6b74 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -151,7 +151,7 @@ /* We actually can't write halfwords properly if not word aligned */ static inline void -SMC_outw(u16 val, unsigned long ioaddr, int reg) +SMC_outw(u16 val, void __iomem *ioaddr, int reg) { if (reg & 2) { unsigned int v = val << 16; @@ -317,7 +317,7 @@ static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l) #define SMC_insl(a, r, p, l) \ smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l) static inline void -smc_pxa_dma_insl(u_long ioaddr, u_long physaddr, int reg, int dma, +smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma, u_char *buf, int len) { dma_addr_t dmabuf; @@ -355,7 +355,7 @@ smc_pxa_dma_insl(u_long ioaddr, u_long physaddr, int reg, int dma, #define SMC_insw(a, r, p, l) \ smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l) static inline void -smc_pxa_dma_insw(u_long ioaddr, u_long physaddr, int reg, int dma, +smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma, u_char *buf, int len) { dma_addr_t dmabuf; @@ -681,14 +681,6 @@ static const char * chip_ids[ 16 ] = { /* - . Transmit status bits -*/ -#define TS_SUCCESS 0x0001 -#define TS_LOSTCAR 0x0400 -#define TS_LATCOL 0x0200 -#define TS_16COL 0x0010 - -/* . Receive status bits */ #define RS_ALGNERR 0x8000 @@ -845,6 +837,7 @@ static const char * chip_ids[ 16 ] = { #define SMC_GET_FIFO() SMC_inw( ioaddr, FIFO_REG ) #define SMC_GET_PTR() SMC_inw( ioaddr, PTR_REG ) #define SMC_SET_PTR(x) SMC_outw( x, ioaddr, PTR_REG ) +#define SMC_GET_EPH_STATUS() SMC_inw( ioaddr, EPH_STATUS_REG ) #define SMC_GET_RCR() SMC_inw( ioaddr, RCR_REG ) #define SMC_SET_RCR(x) SMC_outw( x, ioaddr, RCR_REG ) #define SMC_GET_REV() SMC_inw( ioaddr, REV_REG ) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index f79b02e80e7..fc9b5cd957a 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -61,8 +61,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.27" -#define DRV_MODULE_RELDATE "May 5, 2005" +#define DRV_MODULE_VERSION "3.29" +#define DRV_MODULE_RELDATE "May 23, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -133,6 +133,8 @@ /* number of ETHTOOL_GSTATS u64's */ #define TG3_NUM_STATS (sizeof(struct tg3_ethtool_stats)/sizeof(u64)) +#define TG3_NUM_TEST 6 + static char version[] __devinitdata = DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; @@ -206,6 +208,8 @@ static struct pci_device_id tg3_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5752, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5752M, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753M, @@ -314,6 +318,17 @@ static struct { { "nic_tx_threshold_hit" } }; +static struct { + const char string[ETH_GSTRING_LEN]; +} ethtool_test_keys[TG3_NUM_TEST] = { + { "nvram test (online) " }, + { "link test (online) " }, + { "register test (offline)" }, + { "memory test (offline)" }, + { "loopback test (offline)" }, + { "interrupt test (offline)" }, +}; + static void tg3_write_indirect_reg32(struct tg3 *tp, u32 off, u32 val) { if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) != 0) { @@ -420,7 +435,8 @@ static void tg3_enable_ints(struct tg3 *tp) { tw32(TG3PCI_MISC_HOST_CTRL, (tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT)); - tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000000); + tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, + (tp->last_tag << 24)); tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); tg3_cond_int(tp); @@ -455,10 +471,16 @@ static void tg3_restart_ints(struct tg3 *tp) { tw32(TG3PCI_MISC_HOST_CTRL, (tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT)); - tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000000); + tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, + tp->last_tag << 24); mmiowb(); - if (tg3_has_work(tp)) + /* When doing tagged status, this work check is unnecessary. + * The last_tag we write above tells the chip which piece of + * work we've completed. + */ + if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) && + tg3_has_work(tp)) tw32(HOSTCC_MODE, tp->coalesce_mode | (HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW)); } @@ -2500,7 +2522,7 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset) if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { if (netif_carrier_ok(tp->dev)) { tw32(HOSTCC_STAT_COAL_TICKS, - DEFAULT_STAT_COAL_TICKS); + tp->coal.stats_block_coalesce_usecs); } else { tw32(HOSTCC_STAT_COAL_TICKS, 0); } @@ -2886,7 +2908,6 @@ static int tg3_poll(struct net_device *netdev, int *budget) * All RX "locking" is done by ensuring outside * code synchronizes with dev->poll() */ - done = 1; if (sblk->idx[0].rx_producer != tp->rx_rcb_ptr) { int orig_budget = *budget; int work_done; @@ -2898,12 +2919,14 @@ static int tg3_poll(struct net_device *netdev, int *budget) *budget -= work_done; netdev->quota -= work_done; - - if (work_done >= orig_budget) - done = 0; } + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + tp->last_tag = sblk->status_tag; + rmb(); + /* if no more work, tell net stack and NIC we're done */ + done = !tg3_has_work(tp); if (done) { spin_lock_irqsave(&tp->lock, flags); __netif_rx_complete(netdev); @@ -2928,22 +2951,21 @@ static irqreturn_t tg3_msi(int irq, void *dev_id, struct pt_regs *regs) spin_lock_irqsave(&tp->lock, flags); /* - * writing any value to intr-mbox-0 clears PCI INTA# and + * Writing any value to intr-mbox-0 clears PCI INTA# and * chip-internal interrupt pending events. - * writing non-zero to intr-mbox-0 additional tells the + * Writing non-zero to intr-mbox-0 additional tells the * NIC to stop sending us irqs, engaging "in-intr-handler" * event coalescing. */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001); + tp->last_tag = sblk->status_tag; sblk->status &= ~SD_STATUS_UPDATED; - if (likely(tg3_has_work(tp))) netif_rx_schedule(dev); /* schedule NAPI poll */ else { - /* no work, re-enable interrupts - */ + /* No work, re-enable interrupts. */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, - 0x00000000); + tp->last_tag << 24); } spin_unlock_irqrestore(&tp->lock, flags); @@ -2969,21 +2991,62 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id, struct pt_regs *regs) if ((sblk->status & SD_STATUS_UPDATED) || !(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) { /* - * writing any value to intr-mbox-0 clears PCI INTA# and + * Writing any value to intr-mbox-0 clears PCI INTA# and * chip-internal interrupt pending events. - * writing non-zero to intr-mbox-0 additional tells the + * Writing non-zero to intr-mbox-0 additional tells the * NIC to stop sending us irqs, engaging "in-intr-handler" * event coalescing. */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001); + sblk->status &= ~SD_STATUS_UPDATED; + if (likely(tg3_has_work(tp))) + netif_rx_schedule(dev); /* schedule NAPI poll */ + else { + /* No work, shared interrupt perhaps? re-enable + * interrupts, and flush that PCI write + */ + tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, + 0x00000000); + tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); + } + } else { /* shared interrupt */ + handled = 0; + } + + spin_unlock_irqrestore(&tp->lock, flags); + + return IRQ_RETVAL(handled); +} + +static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct tg3 *tp = netdev_priv(dev); + struct tg3_hw_status *sblk = tp->hw_status; + unsigned long flags; + unsigned int handled = 1; + + spin_lock_irqsave(&tp->lock, flags); + + /* In INTx mode, it is possible for the interrupt to arrive at + * the CPU before the status block posted prior to the interrupt. + * Reading the PCI State register will confirm whether the + * interrupt is ours and will flush the status block. + */ + if ((sblk->status & SD_STATUS_UPDATED) || + !(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) { /* - * Flush PCI write. This also guarantees that our - * status block has been flushed to host memory. + * writing any value to intr-mbox-0 clears PCI INTA# and + * chip-internal interrupt pending events. + * writing non-zero to intr-mbox-0 additional tells the + * NIC to stop sending us irqs, engaging "in-intr-handler" + * event coalescing. */ - tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); + tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, + 0x00000001); + tp->last_tag = sblk->status_tag; sblk->status &= ~SD_STATUS_UPDATED; - if (likely(tg3_has_work(tp))) netif_rx_schedule(dev); /* schedule NAPI poll */ else { @@ -2991,7 +3054,7 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id, struct pt_regs *regs) * interrupts, and flush that PCI write */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, - 0x00000000); + tp->last_tag << 24); tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); } } else { /* shared interrupt */ @@ -3020,7 +3083,7 @@ static irqreturn_t tg3_test_isr(int irq, void *dev_id, } static int tg3_init_hw(struct tg3 *); -static int tg3_halt(struct tg3 *, int); +static int tg3_halt(struct tg3 *, int, int); #ifdef CONFIG_NET_POLL_CONTROLLER static void tg3_poll_controller(struct net_device *dev) @@ -3044,7 +3107,7 @@ static void tg3_reset_task(void *_data) restart_timer = tp->tg3_flags2 & TG3_FLG2_RESTART_TIMER; tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER; - tg3_halt(tp, 0); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 0); tg3_init_hw(tp); tg3_netif_start(tp); @@ -3390,7 +3453,7 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) spin_lock_irq(&tp->lock); spin_lock(&tp->tx_lock); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_set_mtu(dev, tp, new_mtu); @@ -4081,19 +4144,19 @@ static void tg3_stop_fw(struct tg3 *tp) } /* tp->lock is held. */ -static int tg3_halt(struct tg3 *tp, int silent) +static int tg3_halt(struct tg3 *tp, int kind, int silent) { int err; tg3_stop_fw(tp); - tg3_write_sig_pre_reset(tp, RESET_KIND_SHUTDOWN); + tg3_write_sig_pre_reset(tp, kind); tg3_abort_hw(tp, silent); err = tg3_chip_reset(tp); - tg3_write_sig_legacy(tp, RESET_KIND_SHUTDOWN); - tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN); + tg3_write_sig_legacy(tp, kind); + tg3_write_sig_post_reset(tp, kind); if (err) return err; @@ -4307,7 +4370,12 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b */ tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG; + /* It is possible that bootcode is still loading at this point. + * Get the nvram lock first before halting the cpu. + */ + tg3_nvram_lock(tp); err = tg3_halt_cpu(tp, cpu_base); + tg3_nvram_unlock(tp); if (err) goto out; @@ -5044,6 +5112,27 @@ static void tg3_set_bdinfo(struct tg3 *tp, u32 bdinfo_addr, } static void __tg3_set_rx_mode(struct net_device *); +static void tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec) +{ + tw32(HOSTCC_RXCOL_TICKS, ec->rx_coalesce_usecs); + tw32(HOSTCC_TXCOL_TICKS, ec->tx_coalesce_usecs); + tw32(HOSTCC_RXMAX_FRAMES, ec->rx_max_coalesced_frames); + tw32(HOSTCC_TXMAX_FRAMES, ec->tx_max_coalesced_frames); + if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { + tw32(HOSTCC_RXCOAL_TICK_INT, ec->rx_coalesce_usecs_irq); + tw32(HOSTCC_TXCOAL_TICK_INT, ec->tx_coalesce_usecs_irq); + } + tw32(HOSTCC_RXCOAL_MAXF_INT, ec->rx_max_coalesced_frames_irq); + tw32(HOSTCC_TXCOAL_MAXF_INT, ec->tx_max_coalesced_frames_irq); + if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { + u32 val = ec->stats_block_coalesce_usecs; + + if (!netif_carrier_ok(tp->dev)) + val = 0; + + tw32(HOSTCC_STAT_COAL_TICKS, val); + } +} /* tp->lock is held. */ static int tg3_reset_hw(struct tg3 *tp) @@ -5366,16 +5455,7 @@ static int tg3_reset_hw(struct tg3 *tp) udelay(10); } - tw32(HOSTCC_RXCOL_TICKS, 0); - tw32(HOSTCC_TXCOL_TICKS, LOW_TXCOL_TICKS); - tw32(HOSTCC_RXMAX_FRAMES, 1); - tw32(HOSTCC_TXMAX_FRAMES, LOW_RXMAX_FRAMES); - if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { - tw32(HOSTCC_RXCOAL_TICK_INT, 0); - tw32(HOSTCC_TXCOAL_TICK_INT, 0); - } - tw32(HOSTCC_RXCOAL_MAXF_INT, 1); - tw32(HOSTCC_TXCOAL_MAXF_INT, 0); + tg3_set_coalesce(tp, &tp->coal); /* set status block DMA address */ tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH, @@ -5388,8 +5468,6 @@ static int tg3_reset_hw(struct tg3 *tp) * the tg3_periodic_fetch_stats call there, and * tg3_get_stats to see how this works for 5705/5750 chips. */ - tw32(HOSTCC_STAT_COAL_TICKS, - DEFAULT_STAT_COAL_TICKS); tw32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH, ((u64) tp->stats_mapping >> 32)); tw32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW, @@ -5445,7 +5523,8 @@ static int tg3_reset_hw(struct tg3 *tp) udelay(100); tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0); - tr32(MAILBOX_INTERRUPT_0); + tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); + tp->last_tag = 0; if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { tw32_f(DMAC_MODE, DMAC_MODE_ENABLE); @@ -5723,31 +5802,33 @@ static void tg3_timer(unsigned long __opaque) spin_lock_irqsave(&tp->lock, flags); spin_lock(&tp->tx_lock); - /* All of this garbage is because when using non-tagged - * IRQ status the mailbox/status_block protocol the chip - * uses with the cpu is race prone. - */ - if (tp->hw_status->status & SD_STATUS_UPDATED) { - tw32(GRC_LOCAL_CTRL, - tp->grc_local_ctrl | GRC_LCLCTRL_SETINT); - } else { - tw32(HOSTCC_MODE, tp->coalesce_mode | - (HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW)); - } + if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) { + /* All of this garbage is because when using non-tagged + * IRQ status the mailbox/status_block protocol the chip + * uses with the cpu is race prone. + */ + if (tp->hw_status->status & SD_STATUS_UPDATED) { + tw32(GRC_LOCAL_CTRL, + tp->grc_local_ctrl | GRC_LCLCTRL_SETINT); + } else { + tw32(HOSTCC_MODE, tp->coalesce_mode | + (HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW)); + } - if (!(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { - tp->tg3_flags2 |= TG3_FLG2_RESTART_TIMER; - spin_unlock(&tp->tx_lock); - spin_unlock_irqrestore(&tp->lock, flags); - schedule_work(&tp->reset_task); - return; + if (!(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { + tp->tg3_flags2 |= TG3_FLG2_RESTART_TIMER; + spin_unlock(&tp->tx_lock); + spin_unlock_irqrestore(&tp->lock, flags); + schedule_work(&tp->reset_task); + return; + } } - if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) - tg3_periodic_fetch_stats(tp); - /* This part only runs once per second. */ if (!--tp->timer_counter) { + if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) + tg3_periodic_fetch_stats(tp); + if (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) { u32 mac_stat; int phy_event; @@ -5818,6 +5899,9 @@ static int tg3_test_interrupt(struct tg3 *tp) int err, i; u32 int_mbox = 0; + if (!netif_running(dev)) + return -ENODEV; + tg3_disable_ints(tp); free_irq(tp->pdev->irq, dev); @@ -5846,9 +5930,13 @@ static int tg3_test_interrupt(struct tg3 *tp) if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) err = request_irq(tp->pdev->irq, tg3_msi, SA_SAMPLE_RANDOM, dev->name, dev); - else - err = request_irq(tp->pdev->irq, tg3_interrupt, + else { + irqreturn_t (*fn)(int, void *, struct pt_regs *)=tg3_interrupt; + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + fn = tg3_interrupt_tagged; + err = request_irq(tp->pdev->irq, fn, SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev); + } if (err) return err; @@ -5900,9 +5988,14 @@ static int tg3_test_msi(struct tg3 *tp) tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI; - err = request_irq(tp->pdev->irq, tg3_interrupt, - SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev); + { + irqreturn_t (*fn)(int, void *, struct pt_regs *)=tg3_interrupt; + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + fn = tg3_interrupt_tagged; + err = request_irq(tp->pdev->irq, fn, + SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev); + } if (err) return err; @@ -5912,7 +6005,7 @@ static int tg3_test_msi(struct tg3 *tp) spin_lock_irq(&tp->lock); spin_lock(&tp->tx_lock); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); err = tg3_init_hw(tp); spin_unlock(&tp->tx_lock); @@ -5948,7 +6041,13 @@ static int tg3_open(struct net_device *dev) if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) && (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5750_AX) && (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5750_BX)) { - if (pci_enable_msi(tp->pdev) == 0) { + /* All MSI supporting chips should support tagged + * status. Assert that this is the case. + */ + if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) { + printk(KERN_WARNING PFX "%s: MSI without TAGGED? " + "Not using MSI.\n", tp->dev->name); + } else if (pci_enable_msi(tp->pdev) == 0) { u32 msi_mode; msi_mode = tr32(MSGINT_MODE); @@ -5959,9 +6058,14 @@ static int tg3_open(struct net_device *dev) if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) err = request_irq(tp->pdev->irq, tg3_msi, SA_SAMPLE_RANDOM, dev->name, dev); - else - err = request_irq(tp->pdev->irq, tg3_interrupt, + else { + irqreturn_t (*fn)(int, void *, struct pt_regs *)=tg3_interrupt; + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + fn = tg3_interrupt_tagged; + + err = request_irq(tp->pdev->irq, fn, SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev); + } if (err) { if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) { @@ -5977,12 +6081,19 @@ static int tg3_open(struct net_device *dev) err = tg3_init_hw(tp); if (err) { - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_free_rings(tp); } else { - tp->timer_offset = HZ / 10; - tp->timer_counter = tp->timer_multiplier = 10; - tp->asf_counter = tp->asf_multiplier = (10 * 120); + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + tp->timer_offset = HZ; + else + tp->timer_offset = HZ / 10; + + BUG_ON(tp->timer_offset > HZ); + tp->timer_counter = tp->timer_multiplier = + (HZ / tp->timer_offset); + tp->asf_counter = tp->asf_multiplier = + ((HZ / tp->timer_offset) * 120); init_timer(&tp->timer); tp->timer.expires = jiffies + tp->timer_offset; @@ -6005,6 +6116,7 @@ static int tg3_open(struct net_device *dev) if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) { err = tg3_test_msi(tp); + if (err) { spin_lock_irq(&tp->lock); spin_lock(&tp->tx_lock); @@ -6013,7 +6125,7 @@ static int tg3_open(struct net_device *dev) pci_disable_msi(tp->pdev); tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI; } - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_free_rings(tp); tg3_free_consistent(tp); @@ -6286,7 +6398,7 @@ static int tg3_close(struct net_device *dev) tg3_disable_ints(tp); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_free_rings(tp); tp->tg3_flags &= ~(TG3_FLAG_INIT_COMPLETE | @@ -7006,7 +7118,7 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e tp->tx_pending = ering->tx_pending; if (netif_running(dev)) { - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_init_hw(tp); tg3_netif_start(tp); } @@ -7049,7 +7161,7 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam tp->tg3_flags &= ~TG3_FLAG_TX_PAUSE; if (netif_running(dev)) { - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_init_hw(tp); tg3_netif_start(tp); } @@ -7108,12 +7220,20 @@ static int tg3_get_stats_count (struct net_device *dev) return TG3_NUM_STATS; } +static int tg3_get_test_count (struct net_device *dev) +{ + return TG3_NUM_TEST; +} + static void tg3_get_strings (struct net_device *dev, u32 stringset, u8 *buf) { switch (stringset) { case ETH_SS_STATS: memcpy(buf, ðtool_stats_keys, sizeof(ethtool_stats_keys)); break; + case ETH_SS_TEST: + memcpy(buf, ðtool_test_keys, sizeof(ethtool_test_keys)); + break; default: WARN_ON(1); /* we need a WARN() */ break; @@ -7127,6 +7247,516 @@ static void tg3_get_ethtool_stats (struct net_device *dev, memcpy(tmp_stats, tg3_get_estats(tp), sizeof(tp->estats)); } +#define NVRAM_TEST_SIZE 0x100 + +static int tg3_test_nvram(struct tg3 *tp) +{ + u32 *buf, csum; + int i, j, err = 0; + + buf = kmalloc(NVRAM_TEST_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + for (i = 0, j = 0; i < NVRAM_TEST_SIZE; i += 4, j++) { + u32 val; + + if ((err = tg3_nvram_read(tp, i, &val)) != 0) + break; + buf[j] = cpu_to_le32(val); + } + if (i < NVRAM_TEST_SIZE) + goto out; + + err = -EIO; + if (cpu_to_be32(buf[0]) != TG3_EEPROM_MAGIC) + goto out; + + /* Bootstrap checksum at offset 0x10 */ + csum = calc_crc((unsigned char *) buf, 0x10); + if(csum != cpu_to_le32(buf[0x10/4])) + goto out; + + /* Manufacturing block starts at offset 0x74, checksum at 0xfc */ + csum = calc_crc((unsigned char *) &buf[0x74/4], 0x88); + if (csum != cpu_to_le32(buf[0xfc/4])) + goto out; + + err = 0; + +out: + kfree(buf); + return err; +} + +#define TG3_SERDES_TIMEOUT_SEC 2 +#define TG3_COPPER_TIMEOUT_SEC 6 + +static int tg3_test_link(struct tg3 *tp) +{ + int i, max; + + if (!netif_running(tp->dev)) + return -ENODEV; + + if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) + max = TG3_SERDES_TIMEOUT_SEC; + else + max = TG3_COPPER_TIMEOUT_SEC; + + for (i = 0; i < max; i++) { + if (netif_carrier_ok(tp->dev)) + return 0; + + if (msleep_interruptible(1000)) + break; + } + + return -EIO; +} + +/* Only test the commonly used registers */ +static int tg3_test_registers(struct tg3 *tp) +{ + int i, is_5705; + u32 offset, read_mask, write_mask, val, save_val, read_val; + static struct { + u16 offset; + u16 flags; +#define TG3_FL_5705 0x1 +#define TG3_FL_NOT_5705 0x2 +#define TG3_FL_NOT_5788 0x4 + u32 read_mask; + u32 write_mask; + } reg_tbl[] = { + /* MAC Control Registers */ + { MAC_MODE, TG3_FL_NOT_5705, + 0x00000000, 0x00ef6f8c }, + { MAC_MODE, TG3_FL_5705, + 0x00000000, 0x01ef6b8c }, + { MAC_STATUS, TG3_FL_NOT_5705, + 0x03800107, 0x00000000 }, + { MAC_STATUS, TG3_FL_5705, + 0x03800100, 0x00000000 }, + { MAC_ADDR_0_HIGH, 0x0000, + 0x00000000, 0x0000ffff }, + { MAC_ADDR_0_LOW, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_RX_MTU_SIZE, 0x0000, + 0x00000000, 0x0000ffff }, + { MAC_TX_MODE, 0x0000, + 0x00000000, 0x00000070 }, + { MAC_TX_LENGTHS, 0x0000, + 0x00000000, 0x00003fff }, + { MAC_RX_MODE, TG3_FL_NOT_5705, + 0x00000000, 0x000007fc }, + { MAC_RX_MODE, TG3_FL_5705, + 0x00000000, 0x000007dc }, + { MAC_HASH_REG_0, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_HASH_REG_1, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_HASH_REG_2, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_HASH_REG_3, 0x0000, + 0x00000000, 0xffffffff }, + + /* Receive Data and Receive BD Initiator Control Registers. */ + { RCVDBDI_JUMBO_BD+0, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVDBDI_JUMBO_BD+4, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVDBDI_JUMBO_BD+8, TG3_FL_NOT_5705, + 0x00000000, 0x00000003 }, + { RCVDBDI_JUMBO_BD+0xc, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVDBDI_STD_BD+0, 0x0000, + 0x00000000, 0xffffffff }, + { RCVDBDI_STD_BD+4, 0x0000, + 0x00000000, 0xffffffff }, + { RCVDBDI_STD_BD+8, 0x0000, + 0x00000000, 0xffff0002 }, + { RCVDBDI_STD_BD+0xc, 0x0000, + 0x00000000, 0xffffffff }, + + /* Receive BD Initiator Control Registers. */ + { RCVBDI_STD_THRESH, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVBDI_STD_THRESH, TG3_FL_5705, + 0x00000000, 0x000003ff }, + { RCVBDI_JUMBO_THRESH, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + + /* Host Coalescing Control Registers. */ + { HOSTCC_MODE, TG3_FL_NOT_5705, + 0x00000000, 0x00000004 }, + { HOSTCC_MODE, TG3_FL_5705, + 0x00000000, 0x000000f6 }, + { HOSTCC_RXCOL_TICKS, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXCOL_TICKS, TG3_FL_5705, + 0x00000000, 0x000003ff }, + { HOSTCC_TXCOL_TICKS, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXCOL_TICKS, TG3_FL_5705, + 0x00000000, 0x000003ff }, + { HOSTCC_RXMAX_FRAMES, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_TXMAX_FRAMES, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_RXCOAL_TICK_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXCOAL_TICK_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXCOAL_MAXF_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_TXCOAL_MAXF_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_STAT_COAL_TICKS, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_STATS_BLK_HOST_ADDR, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_STATS_BLK_HOST_ADDR+4, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_STATUS_BLK_HOST_ADDR, 0x0000, + 0x00000000, 0xffffffff }, + { HOSTCC_STATUS_BLK_HOST_ADDR+4, 0x0000, + 0x00000000, 0xffffffff }, + { HOSTCC_STATS_BLK_NIC_ADDR, 0x0000, + 0xffffffff, 0x00000000 }, + { HOSTCC_STATUS_BLK_NIC_ADDR, 0x0000, + 0xffffffff, 0x00000000 }, + + /* Buffer Manager Control Registers. */ + { BUFMGR_MB_POOL_ADDR, 0x0000, + 0x00000000, 0x007fff80 }, + { BUFMGR_MB_POOL_SIZE, 0x0000, + 0x00000000, 0x007fffff }, + { BUFMGR_MB_RDMA_LOW_WATER, 0x0000, + 0x00000000, 0x0000003f }, + { BUFMGR_MB_MACRX_LOW_WATER, 0x0000, + 0x00000000, 0x000001ff }, + { BUFMGR_MB_HIGH_WATER, 0x0000, + 0x00000000, 0x000001ff }, + { BUFMGR_DMA_DESC_POOL_ADDR, TG3_FL_NOT_5705, + 0xffffffff, 0x00000000 }, + { BUFMGR_DMA_DESC_POOL_SIZE, TG3_FL_NOT_5705, + 0xffffffff, 0x00000000 }, + + /* Mailbox Registers */ + { GRCMBOX_RCVSTD_PROD_IDX+4, 0x0000, + 0x00000000, 0x000001ff }, + { GRCMBOX_RCVJUMBO_PROD_IDX+4, TG3_FL_NOT_5705, + 0x00000000, 0x000001ff }, + { GRCMBOX_RCVRET_CON_IDX_0+4, 0x0000, + 0x00000000, 0x000007ff }, + { GRCMBOX_SNDHOST_PROD_IDX_0+4, 0x0000, + 0x00000000, 0x000001ff }, + + { 0xffff, 0x0000, 0x00000000, 0x00000000 }, + }; + + if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) + is_5705 = 1; + else + is_5705 = 0; + + for (i = 0; reg_tbl[i].offset != 0xffff; i++) { + if (is_5705 && (reg_tbl[i].flags & TG3_FL_NOT_5705)) + continue; + + if (!is_5705 && (reg_tbl[i].flags & TG3_FL_5705)) + continue; + + if ((tp->tg3_flags2 & TG3_FLG2_IS_5788) && + (reg_tbl[i].flags & TG3_FL_NOT_5788)) + continue; + + offset = (u32) reg_tbl[i].offset; + read_mask = reg_tbl[i].read_mask; + write_mask = reg_tbl[i].write_mask; + + /* Save the original register content */ + save_val = tr32(offset); + + /* Determine the read-only value. */ + read_val = save_val & read_mask; + + /* Write zero to the register, then make sure the read-only bits + * are not changed and the read/write bits are all zeros. + */ + tw32(offset, 0); + + val = tr32(offset); + + /* Test the read-only and read/write bits. */ + if (((val & read_mask) != read_val) || (val & write_mask)) + goto out; + + /* Write ones to all the bits defined by RdMask and WrMask, then + * make sure the read-only bits are not changed and the + * read/write bits are all ones. + */ + tw32(offset, read_mask | write_mask); + + val = tr32(offset); + + /* Test the read-only bits. */ + if ((val & read_mask) != read_val) + goto out; + + /* Test the read/write bits. */ + if ((val & write_mask) != write_mask) + goto out; + + tw32(offset, save_val); + } + + return 0; + +out: + printk(KERN_ERR PFX "Register test failed at offset %x\n", offset); + tw32(offset, save_val); + return -EIO; +} + +static int tg3_do_mem_test(struct tg3 *tp, u32 offset, u32 len) +{ + static u32 test_pattern[] = { 0x00000000, 0xffffffff, 0xaa55a55a }; + int i; + u32 j; + + for (i = 0; i < sizeof(test_pattern)/sizeof(u32); i++) { + for (j = 0; j < len; j += 4) { + u32 val; + + tg3_write_mem(tp, offset + j, test_pattern[i]); + tg3_read_mem(tp, offset + j, &val); + if (val != test_pattern[i]) + return -EIO; + } + } + return 0; +} + +static int tg3_test_memory(struct tg3 *tp) +{ + static struct mem_entry { + u32 offset; + u32 len; + } mem_tbl_570x[] = { + { 0x00000000, 0x01000}, + { 0x00002000, 0x1c000}, + { 0xffffffff, 0x00000} + }, mem_tbl_5705[] = { + { 0x00000100, 0x0000c}, + { 0x00000200, 0x00008}, + { 0x00000b50, 0x00400}, + { 0x00004000, 0x00800}, + { 0x00006000, 0x01000}, + { 0x00008000, 0x02000}, + { 0x00010000, 0x0e000}, + { 0xffffffff, 0x00000} + }; + struct mem_entry *mem_tbl; + int err = 0; + int i; + + if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) + mem_tbl = mem_tbl_5705; + else + mem_tbl = mem_tbl_570x; + + for (i = 0; mem_tbl[i].offset != 0xffffffff; i++) { + if ((err = tg3_do_mem_test(tp, mem_tbl[i].offset, + mem_tbl[i].len)) != 0) + break; + } + + return err; +} + +static int tg3_test_loopback(struct tg3 *tp) +{ + u32 mac_mode, send_idx, rx_start_idx, rx_idx, tx_idx, opaque_key; + u32 desc_idx; + struct sk_buff *skb, *rx_skb; + u8 *tx_data; + dma_addr_t map; + int num_pkts, tx_len, rx_len, i, err; + struct tg3_rx_buffer_desc *desc; + + if (!netif_running(tp->dev)) + return -ENODEV; + + err = -EIO; + + tg3_abort_hw(tp, 1); + + /* Clearing this flag to keep interrupts disabled */ + tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE; + tg3_reset_hw(tp); + + mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) | + MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY | + MAC_MODE_PORT_MODE_GMII; + tw32(MAC_MODE, mac_mode); + + tx_len = 1514; + skb = dev_alloc_skb(tx_len); + tx_data = skb_put(skb, tx_len); + memcpy(tx_data, tp->dev->dev_addr, 6); + memset(tx_data + 6, 0x0, 8); + + tw32(MAC_RX_MTU_SIZE, tx_len + 4); + + for (i = 14; i < tx_len; i++) + tx_data[i] = (u8) (i & 0xff); + + map = pci_map_single(tp->pdev, skb->data, tx_len, PCI_DMA_TODEVICE); + + tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE | + HOSTCC_MODE_NOW); + + udelay(10); + + rx_start_idx = tp->hw_status->idx[0].rx_producer; + + send_idx = 0; + num_pkts = 0; + + tg3_set_txd(tp, send_idx, map, tx_len, 0, 1); + + send_idx++; + num_pkts++; + + tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, send_idx); + tr32(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW); + + udelay(10); + + for (i = 0; i < 10; i++) { + tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE | + HOSTCC_MODE_NOW); + + udelay(10); + + tx_idx = tp->hw_status->idx[0].tx_consumer; + rx_idx = tp->hw_status->idx[0].rx_producer; + if ((tx_idx == send_idx) && + (rx_idx == (rx_start_idx + num_pkts))) + break; + } + + pci_unmap_single(tp->pdev, map, tx_len, PCI_DMA_TODEVICE); + dev_kfree_skb(skb); + + if (tx_idx != send_idx) + goto out; + + if (rx_idx != rx_start_idx + num_pkts) + goto out; + + desc = &tp->rx_rcb[rx_start_idx]; + desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK; + opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK; + if (opaque_key != RXD_OPAQUE_RING_STD) + goto out; + + if ((desc->err_vlan & RXD_ERR_MASK) != 0 && + (desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII)) + goto out; + + rx_len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT) - 4; + if (rx_len != tx_len) + goto out; + + rx_skb = tp->rx_std_buffers[desc_idx].skb; + + map = pci_unmap_addr(&tp->rx_std_buffers[desc_idx], mapping); + pci_dma_sync_single_for_cpu(tp->pdev, map, rx_len, PCI_DMA_FROMDEVICE); + + for (i = 14; i < tx_len; i++) { + if (*(rx_skb->data + i) != (u8) (i & 0xff)) + goto out; + } + err = 0; + + /* tg3_free_rings will unmap and free the rx_skb */ +out: + return err; +} + +static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, + u64 *data) +{ + struct tg3 *tp = netdev_priv(dev); + + memset(data, 0, sizeof(u64) * TG3_NUM_TEST); + + if (tg3_test_nvram(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[0] = 1; + } + if (tg3_test_link(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[1] = 1; + } + if (etest->flags & ETH_TEST_FL_OFFLINE) { + if (netif_running(dev)) + tg3_netif_stop(tp); + + spin_lock_irq(&tp->lock); + spin_lock(&tp->tx_lock); + + tg3_halt(tp, RESET_KIND_SUSPEND, 1); + tg3_nvram_lock(tp); + tg3_halt_cpu(tp, RX_CPU_BASE); + if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) + tg3_halt_cpu(tp, TX_CPU_BASE); + tg3_nvram_unlock(tp); + + if (tg3_test_registers(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[2] = 1; + } + if (tg3_test_memory(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[3] = 1; + } + if (tg3_test_loopback(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[4] = 1; + } + + spin_unlock(&tp->tx_lock); + spin_unlock_irq(&tp->lock); + if (tg3_test_interrupt(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[5] = 1; + } + spin_lock_irq(&tp->lock); + spin_lock(&tp->tx_lock); + + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); + if (netif_running(dev)) { + tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE; + tg3_init_hw(tp); + tg3_netif_start(tp); + } + spin_unlock(&tp->tx_lock); + spin_unlock_irq(&tp->lock); + } +} + static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { struct mii_ioctl_data *data = if_mii(ifr); @@ -7203,6 +7833,14 @@ static void tg3_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) } #endif +static int tg3_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) +{ + struct tg3 *tp = netdev_priv(dev); + + memcpy(ec, &tp->coal, sizeof(*ec)); + return 0; +} + static struct ethtool_ops tg3_ethtool_ops = { .get_settings = tg3_get_settings, .set_settings = tg3_set_settings, @@ -7232,9 +7870,12 @@ static struct ethtool_ops tg3_ethtool_ops = { .get_tso = ethtool_op_get_tso, .set_tso = tg3_set_tso, #endif + .self_test_count = tg3_get_test_count, + .self_test = tg3_self_test, .get_strings = tg3_get_strings, .get_stats_count = tg3_get_stats_count, .get_ethtool_stats = tg3_get_ethtool_stats, + .get_coalesce = tg3_get_coalesce, }; static void __devinit tg3_get_eeprom_size(struct tg3 *tp) @@ -8422,15 +9063,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG; - /* Only 5701 and later support tagged irq status mode. - * Also, 5788 chips cannot use tagged irq status. - * - * However, since we are using NAPI avoid tagged irq status - * because the interrupt condition is more difficult to - * fully clear in that mode. - */ tp->coalesce_mode = 0; - if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_AX && GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_BX) tp->coalesce_mode |= HOSTCC_MODE_32BYTE; @@ -8494,6 +9127,18 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788M)) tp->tg3_flags2 |= TG3_FLG2_IS_5788; + if (!(tp->tg3_flags2 & TG3_FLG2_IS_5788) && + (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700)) + tp->tg3_flags |= TG3_FLAG_TAGGED_STATUS; + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) { + tp->coalesce_mode |= (HOSTCC_MODE_CLRTICK_RXBD | + HOSTCC_MODE_CLRTICK_TXBD); + + tp->misc_host_ctrl |= MISC_HOST_CTRL_TAGGED_STATUS; + pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL, + tp->misc_host_ctrl); + } + /* these are limited to 10/100 only */ if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 && (grc_misc_cfg == 0x8000 || grc_misc_cfg == 0x4000)) || @@ -8671,6 +9316,146 @@ static int __devinit tg3_get_device_address(struct tg3 *tp) return 0; } +#define BOUNDARY_SINGLE_CACHELINE 1 +#define BOUNDARY_MULTI_CACHELINE 2 + +static u32 __devinit tg3_calc_dma_bndry(struct tg3 *tp, u32 val) +{ + int cacheline_size; + u8 byte; + int goal; + + pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE, &byte); + if (byte == 0) + cacheline_size = 1024; + else + cacheline_size = (int) byte * 4; + + /* On 5703 and later chips, the boundary bits have no + * effect. + */ + if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 && + GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 && + !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) + goto out; + +#if defined(CONFIG_PPC64) || defined(CONFIG_IA64) || defined(CONFIG_PARISC) + goal = BOUNDARY_MULTI_CACHELINE; +#else +#if defined(CONFIG_SPARC64) || defined(CONFIG_ALPHA) + goal = BOUNDARY_SINGLE_CACHELINE; +#else + goal = 0; +#endif +#endif + + if (!goal) + goto out; + + /* PCI controllers on most RISC systems tend to disconnect + * when a device tries to burst across a cache-line boundary. + * Therefore, letting tg3 do so just wastes PCI bandwidth. + * + * Unfortunately, for PCI-E there are only limited + * write-side controls for this, and thus for reads + * we will still get the disconnects. We'll also waste + * these PCI cycles for both read and write for chips + * other than 5700 and 5701 which do not implement the + * boundary bits. + */ + if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) && + !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) { + switch (cacheline_size) { + case 16: + case 32: + case 64: + case 128: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_128_PCIX | + DMA_RWCTRL_WRITE_BNDRY_128_PCIX); + } else { + val |= (DMA_RWCTRL_READ_BNDRY_384_PCIX | + DMA_RWCTRL_WRITE_BNDRY_384_PCIX); + } + break; + + case 256: + val |= (DMA_RWCTRL_READ_BNDRY_256_PCIX | + DMA_RWCTRL_WRITE_BNDRY_256_PCIX); + break; + + default: + val |= (DMA_RWCTRL_READ_BNDRY_384_PCIX | + DMA_RWCTRL_WRITE_BNDRY_384_PCIX); + break; + }; + } else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) { + switch (cacheline_size) { + case 16: + case 32: + case 64: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val &= ~DMA_RWCTRL_WRITE_BNDRY_DISAB_PCIE; + val |= DMA_RWCTRL_WRITE_BNDRY_64_PCIE; + break; + } + /* fallthrough */ + case 128: + default: + val &= ~DMA_RWCTRL_WRITE_BNDRY_DISAB_PCIE; + val |= DMA_RWCTRL_WRITE_BNDRY_128_PCIE; + break; + }; + } else { + switch (cacheline_size) { + case 16: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_16 | + DMA_RWCTRL_WRITE_BNDRY_16); + break; + } + /* fallthrough */ + case 32: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_32 | + DMA_RWCTRL_WRITE_BNDRY_32); + break; + } + /* fallthrough */ + case 64: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_64 | + DMA_RWCTRL_WRITE_BNDRY_64); + break; + } + /* fallthrough */ + case 128: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_128 | + DMA_RWCTRL_WRITE_BNDRY_128); + break; + } + /* fallthrough */ + case 256: + val |= (DMA_RWCTRL_READ_BNDRY_256 | + DMA_RWCTRL_WRITE_BNDRY_256); + break; + case 512: + val |= (DMA_RWCTRL_READ_BNDRY_512 | + DMA_RWCTRL_WRITE_BNDRY_512); + break; + case 1024: + default: + val |= (DMA_RWCTRL_READ_BNDRY_1024 | + DMA_RWCTRL_WRITE_BNDRY_1024); + break; + }; + } + +out: + return val; +} + static int __devinit tg3_do_test_dma(struct tg3 *tp, u32 *buf, dma_addr_t buf_dma, int size, int to_device) { struct tg3_internal_buffer_desc test_desc; @@ -8752,12 +9537,12 @@ static int __devinit tg3_do_test_dma(struct tg3 *tp, u32 *buf, dma_addr_t buf_dm return ret; } -#define TEST_BUFFER_SIZE 0x400 +#define TEST_BUFFER_SIZE 0x2000 static int __devinit tg3_test_dma(struct tg3 *tp) { dma_addr_t buf_dma; - u32 *buf; + u32 *buf, saved_dma_rwctrl; int ret; buf = pci_alloc_consistent(tp->pdev, TEST_BUFFER_SIZE, &buf_dma); @@ -8769,46 +9554,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp) tp->dma_rwctrl = ((0x7 << DMA_RWCTRL_PCI_WRITE_CMD_SHIFT) | (0x6 << DMA_RWCTRL_PCI_READ_CMD_SHIFT)); -#ifndef CONFIG_X86 - { - u8 byte; - int cacheline_size; - pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE, &byte); - - if (byte == 0) - cacheline_size = 1024; - else - cacheline_size = (int) byte * 4; - - switch (cacheline_size) { - case 16: - case 32: - case 64: - case 128: - if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) && - !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) { - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_384_PCIX; - break; - } else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) { - tp->dma_rwctrl &= - ~(DMA_RWCTRL_PCI_WRITE_CMD); - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_128_PCIE; - break; - } - /* fallthrough */ - case 256: - if (!(tp->tg3_flags & TG3_FLAG_PCIX_MODE) && - !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_256; - else if (!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_256_PCIX; - }; - } -#endif + tp->dma_rwctrl = tg3_calc_dma_bndry(tp, tp->dma_rwctrl); if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) { /* DMA read watermark not used on PCIE */ @@ -8827,7 +9573,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp) if (ccval == 0x6 || ccval == 0x7) tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA; - /* Set bit 23 to renable PCIX hw bug fix */ + /* Set bit 23 to enable PCIX hw bug fix */ tp->dma_rwctrl |= 0x009f0000; } else { tp->dma_rwctrl |= 0x001b000f; @@ -8868,6 +9614,13 @@ static int __devinit tg3_test_dma(struct tg3 *tp) GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) goto out; + /* It is best to perform DMA test with maximum write burst size + * to expose the 5700/5701 write DMA bug. + */ + saved_dma_rwctrl = tp->dma_rwctrl; + tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK; + tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl); + while (1) { u32 *p = buf, i; @@ -8906,8 +9659,9 @@ static int __devinit tg3_test_dma(struct tg3 *tp) if (p[i] == i) continue; - if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) == - DMA_RWCTRL_WRITE_BNDRY_DISAB) { + if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) != + DMA_RWCTRL_WRITE_BNDRY_16) { + tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK; tp->dma_rwctrl |= DMA_RWCTRL_WRITE_BNDRY_16; tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl); break; @@ -8924,6 +9678,14 @@ static int __devinit tg3_test_dma(struct tg3 *tp) break; } } + if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) != + DMA_RWCTRL_WRITE_BNDRY_16) { + /* DMA test passed without adjusting DMA boundary, + * just restore the calculated DMA boundary + */ + tp->dma_rwctrl = saved_dma_rwctrl; + tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl); + } out: pci_free_consistent(tp->pdev, TEST_BUFFER_SIZE, buf, buf_dma); @@ -9011,6 +9773,31 @@ static struct pci_dev * __devinit tg3_find_5704_peer(struct tg3 *tp) return peer; } +static void __devinit tg3_init_coal(struct tg3 *tp) +{ + struct ethtool_coalesce *ec = &tp->coal; + + memset(ec, 0, sizeof(*ec)); + ec->cmd = ETHTOOL_GCOALESCE; + ec->rx_coalesce_usecs = LOW_RXCOL_TICKS; + ec->tx_coalesce_usecs = LOW_TXCOL_TICKS; + ec->rx_max_coalesced_frames = LOW_RXMAX_FRAMES; + ec->tx_max_coalesced_frames = LOW_TXMAX_FRAMES; + ec->rx_coalesce_usecs_irq = DEFAULT_RXCOAL_TICK_INT; + ec->tx_coalesce_usecs_irq = DEFAULT_TXCOAL_TICK_INT; + ec->rx_max_coalesced_frames_irq = DEFAULT_RXCOAL_MAXF_INT; + ec->tx_max_coalesced_frames_irq = DEFAULT_TXCOAL_MAXF_INT; + ec->stats_block_coalesce_usecs = DEFAULT_STAT_COAL_TICKS; + + if (tp->coalesce_mode & (HOSTCC_MODE_CLRTICK_RXBD | + HOSTCC_MODE_CLRTICK_TXBD)) { + ec->rx_coalesce_usecs = LOW_RXCOL_TICKS_CLRTCKS; + ec->rx_coalesce_usecs_irq = DEFAULT_RXCOAL_TICK_INT_CLRTCKS; + ec->tx_coalesce_usecs = LOW_TXCOL_TICKS_CLRTCKS; + ec->tx_coalesce_usecs_irq = DEFAULT_TXCOAL_TICK_INT_CLRTCKS; + } +} + static int __devinit tg3_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -9232,7 +10019,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { pci_save_state(tp->pdev); tw32(MEMARB_MODE, MEMARB_MODE_ENABLE); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); } err = tg3_test_dma(tp); @@ -9256,6 +10043,8 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, /* flow control autonegotiation is default behavior */ tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG; + tg3_init_coal(tp); + err = register_netdev(dev); if (err) { printk(KERN_ERR PFX "Cannot register net device, " @@ -9298,6 +10087,8 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, (tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0, (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0, (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0); + printk(KERN_INFO "%s: dma_rwctrl[%08x]\n", + dev->name, tp->dma_rwctrl); return 0; @@ -9355,7 +10146,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) spin_lock_irq(&tp->lock); spin_lock(&tp->tx_lock); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); spin_unlock(&tp->tx_lock); spin_unlock_irq(&tp->lock); diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 8de6f21037b..993f84c93dc 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -876,10 +876,12 @@ #define HOSTCC_STATUS_ERROR_ATTN 0x00000004 #define HOSTCC_RXCOL_TICKS 0x00003c08 #define LOW_RXCOL_TICKS 0x00000032 +#define LOW_RXCOL_TICKS_CLRTCKS 0x00000014 #define DEFAULT_RXCOL_TICKS 0x00000048 #define HIGH_RXCOL_TICKS 0x00000096 #define HOSTCC_TXCOL_TICKS 0x00003c0c #define LOW_TXCOL_TICKS 0x00000096 +#define LOW_TXCOL_TICKS_CLRTCKS 0x00000048 #define DEFAULT_TXCOL_TICKS 0x0000012c #define HIGH_TXCOL_TICKS 0x00000145 #define HOSTCC_RXMAX_FRAMES 0x00003c10 @@ -892,8 +894,10 @@ #define HIGH_TXMAX_FRAMES 0x00000052 #define HOSTCC_RXCOAL_TICK_INT 0x00003c18 #define DEFAULT_RXCOAL_TICK_INT 0x00000019 +#define DEFAULT_RXCOAL_TICK_INT_CLRTCKS 0x00000014 #define HOSTCC_TXCOAL_TICK_INT 0x00003c1c #define DEFAULT_TXCOAL_TICK_INT 0x00000019 +#define DEFAULT_TXCOAL_TICK_INT_CLRTCKS 0x00000014 #define HOSTCC_RXCOAL_MAXF_INT 0x00003c20 #define DEFAULT_RXCOAL_MAXF_INT 0x00000005 #define HOSTCC_TXCOAL_MAXF_INT 0x00003c24 @@ -2023,6 +2027,7 @@ struct tg3 { struct tg3_hw_status *hw_status; dma_addr_t status_mapping; + u32 last_tag; u32 msg_enable; @@ -2068,6 +2073,7 @@ struct tg3 { u32 rx_offset; u32 tg3_flags; +#define TG3_FLAG_TAGGED_STATUS 0x00000001 #define TG3_FLAG_TXD_MBOX_HWBUG 0x00000002 #define TG3_FLAG_RX_CHECKSUMS 0x00000004 #define TG3_FLAG_USE_LINKCHG_REG 0x00000008 @@ -2225,7 +2231,7 @@ struct tg3 { #define SST_25VF0X0_PAGE_SIZE 4098 - + struct ethtool_coalesce coal; }; #endif /* !(_T3_H) */ diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index a7ffa64502d..cf31c062985 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -193,6 +193,12 @@ static int aui[MAX_TLAN_BOARDS]; static int duplex[MAX_TLAN_BOARDS]; static int speed[MAX_TLAN_BOARDS]; static int boards_found; +module_param_array(aui, int, NULL, 0); +module_param_array(duplex, int, NULL, 0); +module_param_array(speed, int, NULL, 0); +MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)"); +MODULE_PARM_DESC(duplex, "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)"); +MODULE_PARM_DESC(speed, "ThunderLAN port speen setting(s) (0,10,100)"); MODULE_AUTHOR("Maintainer: Samuel Chessman <chessman@tux.org>"); MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters"); @@ -204,8 +210,13 @@ MODULE_LICENSE("GPL"); /* Turn on debugging. See Documentation/networking/tlan.txt for details */ static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "ThunderLAN debug mask"); static int bbuf; +module_param(bbuf, int, 0); +MODULE_PARM_DESC(bbuf, "ThunderLAN use big buffer (0-1)"); + static u8 *TLanPadBuffer; static dma_addr_t TLanPadBufferDMA; static char TLanSignature[] = "TLAN"; @@ -2381,6 +2392,7 @@ TLan_FinishReset( struct net_device *dev ) TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_FINISH_RESET ); return; } + TLan_SetMulticastList(dev); } /* TLan_FinishReset */ @@ -2807,7 +2819,7 @@ void TLan_PhyMonitor( struct net_device *dev ) if (priv->link) { priv->link = 0; printk(KERN_DEBUG "TLAN: %s has lost link\n", dev->name); - dev->flags &= ~IFF_RUNNING; + netif_carrier_off(dev); TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT ); return; } @@ -2817,7 +2829,7 @@ void TLan_PhyMonitor( struct net_device *dev ) if ((phy_status & MII_GS_LINK) && !priv->link) { priv->link = 1; printk(KERN_DEBUG "TLAN: %s has reestablished link\n", dev->name); - dev->flags |= IFF_RUNNING; + netif_carrier_on(dev); } /* Setup a new monitor */ diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index c098863bdd9..3873917a9c2 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -888,11 +888,6 @@ static int tok_open(struct net_device *dev) ti->sap_status = CLOSED; /* CLOSED or OPEN */ ti->open_failure = NO; /* NO or YES */ ti->open_mode = MANUAL; /* MANUAL or AUTOMATIC */ - /* 12/2000 not typical Linux, but we can use RUNNING to let us know when - the network has crapped out or cables are disconnected. Useful because - the IFF_UP flag stays up the whole time, until ifconfig tr0 down. - */ - dev->flags &= ~IFF_RUNNING; ti->sram_phys &= ~1; /* to reverse what we do in tok_close */ /* init the spinlock */ @@ -1242,7 +1237,7 @@ irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs) ti->open_status = CLOSED; ti->sap_status = CLOSED; ti->open_mode = AUTOMATIC; - dev->flags &= ~IFF_RUNNING; + netif_carrier_off(dev); netif_stop_queue(dev); ti->open_action = RESTART; outb(0, dev->base_addr + ADAPTRESET); @@ -1323,7 +1318,7 @@ irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs) break; } netif_wake_queue(dev); - dev->flags |= IFF_RUNNING;/*BMS 12/2000*/ + netif_carrier_on(dev); break; case DIR_INTERRUPT: case DIR_MOD_OPEN_PARAMS: @@ -1427,7 +1422,7 @@ irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs) ring_status); if(ring_status& (REMOVE_RECV|AUTO_REMOVAL|LOBE_FAULT)){ netif_stop_queue(dev); - dev->flags &= ~IFF_RUNNING;/*not typical Linux*/ + netif_carrier_off(dev); DPRINTK("Remove received, or Auto-removal error" ", or Lobe fault\n"); DPRINTK("We'll try to reopen the closed adapter" diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c index edae09a4b02..919c40cd635 100644 --- a/drivers/net/tulip/media.c +++ b/drivers/net/tulip/media.c @@ -174,6 +174,7 @@ void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val) break; } spin_unlock_irqrestore(&tp->mii_lock, flags); + return; } /* Establish sync by sending 32 logic ones. */ diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index d098b3ba353..e0ae3ed6e57 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -1104,7 +1104,7 @@ static void set_rx_mode(struct net_device *dev) if (entry != 0) { /* Avoid a chip errata by prefixing a dummy entry. Don't do this on the ULI526X as it triggers a different problem */ - if (!(tp->chip_id == ULI526X && (tp->revision = 0x40 || tp->revision == 0x50))) { + if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) { tp->tx_buffers[entry].skb = NULL; tp->tx_buffers[entry].mapping = 0; tp->tx_ring[entry].length = diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index 7f450b51a6c..a5d6891c9d4 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -2,7 +2,7 @@ * Generic HDLC support routines for Linux * Frame Relay support * - * Copyright (C) 1999 - 2003 Krzysztof Halasa <khc@pm.waw.pl> + * Copyright (C) 1999 - 2005 Krzysztof Halasa <khc@pm.waw.pl> * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -27,6 +27,10 @@ active = open and "link reliable" exist = new = not used + CCITT LMI: ITU-T Q.933 Annex A + ANSI LMI: ANSI T1.617 Annex D + CISCO LMI: the original, aka "Gang of Four" LMI + */ #include <linux/module.h> @@ -49,45 +53,41 @@ #undef DEBUG_ECN #undef DEBUG_LINK -#define MAXLEN_LMISTAT 20 /* max size of status enquiry frame */ - -#define PVC_STATE_NEW 0x01 -#define PVC_STATE_ACTIVE 0x02 -#define PVC_STATE_FECN 0x08 /* FECN condition */ -#define PVC_STATE_BECN 0x10 /* BECN condition */ - - -#define FR_UI 0x03 -#define FR_PAD 0x00 - -#define NLPID_IP 0xCC -#define NLPID_IPV6 0x8E -#define NLPID_SNAP 0x80 -#define NLPID_PAD 0x00 -#define NLPID_Q933 0x08 - - -#define LMI_DLCI 0 /* LMI DLCI */ -#define LMI_PROTO 0x08 -#define LMI_CALLREF 0x00 /* Call Reference */ -#define LMI_ANSI_LOCKSHIFT 0x95 /* ANSI lockshift */ -#define LMI_REPTYPE 1 /* report type */ -#define LMI_CCITT_REPTYPE 0x51 -#define LMI_ALIVE 3 /* keep alive */ -#define LMI_CCITT_ALIVE 0x53 -#define LMI_PVCSTAT 7 /* pvc status */ -#define LMI_CCITT_PVCSTAT 0x57 -#define LMI_FULLREP 0 /* full report */ -#define LMI_INTEGRITY 1 /* link integrity report */ -#define LMI_SINGLE 2 /* single pvc report */ +#define FR_UI 0x03 +#define FR_PAD 0x00 + +#define NLPID_IP 0xCC +#define NLPID_IPV6 0x8E +#define NLPID_SNAP 0x80 +#define NLPID_PAD 0x00 +#define NLPID_CCITT_ANSI_LMI 0x08 +#define NLPID_CISCO_LMI 0x09 + + +#define LMI_CCITT_ANSI_DLCI 0 /* LMI DLCI */ +#define LMI_CISCO_DLCI 1023 + +#define LMI_CALLREF 0x00 /* Call Reference */ +#define LMI_ANSI_LOCKSHIFT 0x95 /* ANSI locking shift */ +#define LMI_ANSI_CISCO_REPTYPE 0x01 /* report type */ +#define LMI_CCITT_REPTYPE 0x51 +#define LMI_ANSI_CISCO_ALIVE 0x03 /* keep alive */ +#define LMI_CCITT_ALIVE 0x53 +#define LMI_ANSI_CISCO_PVCSTAT 0x07 /* PVC status */ +#define LMI_CCITT_PVCSTAT 0x57 + +#define LMI_FULLREP 0x00 /* full report */ +#define LMI_INTEGRITY 0x01 /* link integrity report */ +#define LMI_SINGLE 0x02 /* single PVC report */ + #define LMI_STATUS_ENQUIRY 0x75 #define LMI_STATUS 0x7D /* reply */ #define LMI_REPT_LEN 1 /* report type element length */ #define LMI_INTEG_LEN 2 /* link integrity element length */ -#define LMI_LENGTH 13 /* standard LMI frame length */ -#define LMI_ANSI_LENGTH 14 +#define LMI_CCITT_CISCO_LENGTH 13 /* LMI frame lengths */ +#define LMI_ANSI_LENGTH 14 typedef struct { @@ -223,51 +223,34 @@ static inline struct net_device** get_dev_p(pvc_device *pvc, int type) } -static inline u16 status_to_dlci(u8 *status, int *active, int *new) -{ - *new = (status[2] & 0x08) ? 1 : 0; - *active = (status[2] & 0x02) ? 1 : 0; - - return ((status[0] & 0x3F) << 4) | ((status[1] & 0x78) >> 3); -} - - -static inline void dlci_to_status(u16 dlci, u8 *status, int active, int new) -{ - status[0] = (dlci >> 4) & 0x3F; - status[1] = ((dlci << 3) & 0x78) | 0x80; - status[2] = 0x80; - - if (new) - status[2] |= 0x08; - else if (active) - status[2] |= 0x02; -} - - - static int fr_hard_header(struct sk_buff **skb_p, u16 dlci) { u16 head_len; struct sk_buff *skb = *skb_p; switch (skb->protocol) { - case __constant_ntohs(ETH_P_IP): + case __constant_ntohs(NLPID_CCITT_ANSI_LMI): head_len = 4; skb_push(skb, head_len); - skb->data[3] = NLPID_IP; + skb->data[3] = NLPID_CCITT_ANSI_LMI; break; - case __constant_ntohs(ETH_P_IPV6): + case __constant_ntohs(NLPID_CISCO_LMI): head_len = 4; skb_push(skb, head_len); - skb->data[3] = NLPID_IPV6; + skb->data[3] = NLPID_CISCO_LMI; break; - case __constant_ntohs(LMI_PROTO): + case __constant_ntohs(ETH_P_IP): + head_len = 4; + skb_push(skb, head_len); + skb->data[3] = NLPID_IP; + break; + + case __constant_ntohs(ETH_P_IPV6): head_len = 4; skb_push(skb, head_len); - skb->data[3] = LMI_PROTO; + skb->data[3] = NLPID_IPV6; break; case __constant_ntohs(ETH_P_802_3): @@ -461,13 +444,14 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) hdlc_device *hdlc = dev_to_hdlc(dev); struct sk_buff *skb; pvc_device *pvc = hdlc->state.fr.first_pvc; - int len = (hdlc->state.fr.settings.lmi == LMI_ANSI) ? LMI_ANSI_LENGTH - : LMI_LENGTH; - int stat_len = 3; + int lmi = hdlc->state.fr.settings.lmi; + int dce = hdlc->state.fr.settings.dce; + int len = lmi == LMI_ANSI ? LMI_ANSI_LENGTH : LMI_CCITT_CISCO_LENGTH; + int stat_len = (lmi == LMI_CISCO) ? 6 : 3; u8 *data; int i = 0; - if (hdlc->state.fr.settings.dce && fullrep) { + if (dce && fullrep) { len += hdlc->state.fr.dce_pvc_count * (2 + stat_len); if (len > HDLC_MAX_MRU) { printk(KERN_WARNING "%s: Too many PVCs while sending " @@ -484,29 +468,31 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) } memset(skb->data, 0, len); skb_reserve(skb, 4); - skb->protocol = __constant_htons(LMI_PROTO); - fr_hard_header(&skb, LMI_DLCI); + if (lmi == LMI_CISCO) { + skb->protocol = __constant_htons(NLPID_CISCO_LMI); + fr_hard_header(&skb, LMI_CISCO_DLCI); + } else { + skb->protocol = __constant_htons(NLPID_CCITT_ANSI_LMI); + fr_hard_header(&skb, LMI_CCITT_ANSI_DLCI); + } data = skb->tail; data[i++] = LMI_CALLREF; - data[i++] = hdlc->state.fr.settings.dce - ? LMI_STATUS : LMI_STATUS_ENQUIRY; - if (hdlc->state.fr.settings.lmi == LMI_ANSI) + data[i++] = dce ? LMI_STATUS : LMI_STATUS_ENQUIRY; + if (lmi == LMI_ANSI) data[i++] = LMI_ANSI_LOCKSHIFT; - data[i++] = (hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_REPTYPE : LMI_REPTYPE; + data[i++] = lmi == LMI_CCITT ? LMI_CCITT_REPTYPE : + LMI_ANSI_CISCO_REPTYPE; data[i++] = LMI_REPT_LEN; data[i++] = fullrep ? LMI_FULLREP : LMI_INTEGRITY; - - data[i++] = (hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_ALIVE : LMI_ALIVE; + data[i++] = lmi == LMI_CCITT ? LMI_CCITT_ALIVE : LMI_ANSI_CISCO_ALIVE; data[i++] = LMI_INTEG_LEN; data[i++] = hdlc->state.fr.txseq =fr_lmi_nextseq(hdlc->state.fr.txseq); data[i++] = hdlc->state.fr.rxseq; - if (hdlc->state.fr.settings.dce && fullrep) { + if (dce && fullrep) { while (pvc) { - data[i++] = (hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_PVCSTAT : LMI_PVCSTAT; + data[i++] = lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT : + LMI_ANSI_CISCO_PVCSTAT; data[i++] = stat_len; /* LMI start/restart */ @@ -523,8 +509,20 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) fr_log_dlci_active(pvc); } - dlci_to_status(pvc->dlci, data + i, - pvc->state.active, pvc->state.new); + if (lmi == LMI_CISCO) { + data[i] = pvc->dlci >> 8; + data[i + 1] = pvc->dlci & 0xFF; + } else { + data[i] = (pvc->dlci >> 4) & 0x3F; + data[i + 1] = ((pvc->dlci << 3) & 0x78) | 0x80; + data[i + 2] = 0x80; + } + + if (pvc->state.new) + data[i + 2] |= 0x08; + else if (pvc->state.active) + data[i + 2] |= 0x02; + i += stat_len; pvc = pvc->next; } @@ -569,6 +567,8 @@ static void fr_set_link_state(int reliable, struct net_device *dev) pvc_carrier(0, pvc); pvc->state.exist = pvc->state.active = 0; pvc->state.new = 0; + if (!hdlc->state.fr.settings.dce) + pvc->state.bandwidth = 0; pvc = pvc->next; } } @@ -583,11 +583,12 @@ static void fr_timer(unsigned long arg) int i, cnt = 0, reliable; u32 list; - if (hdlc->state.fr.settings.dce) + if (hdlc->state.fr.settings.dce) { reliable = hdlc->state.fr.request && time_before(jiffies, hdlc->state.fr.last_poll + hdlc->state.fr.settings.t392 * HZ); - else { + hdlc->state.fr.request = 0; + } else { hdlc->state.fr.last_errors <<= 1; /* Shift the list */ if (hdlc->state.fr.request) { if (hdlc->state.fr.reliable) @@ -634,65 +635,88 @@ static void fr_timer(unsigned long arg) static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) { hdlc_device *hdlc = dev_to_hdlc(dev); - int stat_len; pvc_device *pvc; - int reptype = -1, error, no_ram; u8 rxseq, txseq; - int i; + int lmi = hdlc->state.fr.settings.lmi; + int dce = hdlc->state.fr.settings.dce; + int stat_len = (lmi == LMI_CISCO) ? 6 : 3, reptype, error, no_ram, i; - if (skb->len < ((hdlc->state.fr.settings.lmi == LMI_ANSI) - ? LMI_ANSI_LENGTH : LMI_LENGTH)) { + if (skb->len < (lmi == LMI_ANSI ? LMI_ANSI_LENGTH : + LMI_CCITT_CISCO_LENGTH)) { printk(KERN_INFO "%s: Short LMI frame\n", dev->name); return 1; } - if (skb->data[5] != (!hdlc->state.fr.settings.dce ? - LMI_STATUS : LMI_STATUS_ENQUIRY)) { - printk(KERN_INFO "%s: LMI msgtype=%x, Not LMI status %s\n", - dev->name, skb->data[2], - hdlc->state.fr.settings.dce ? "enquiry" : "reply"); + if (skb->data[3] != (lmi == LMI_CISCO ? NLPID_CISCO_LMI : + NLPID_CCITT_ANSI_LMI)) { + printk(KERN_INFO "%s: Received non-LMI frame with LMI" + " DLCI\n", dev->name); + return 1; + } + + if (skb->data[4] != LMI_CALLREF) { + printk(KERN_INFO "%s: Invalid LMI Call reference (0x%02X)\n", + dev->name, skb->data[4]); + return 1; + } + + if (skb->data[5] != (dce ? LMI_STATUS_ENQUIRY : LMI_STATUS)) { + printk(KERN_INFO "%s: Invalid LMI Message type (0x%02X)\n", + dev->name, skb->data[5]); return 1; } - i = (hdlc->state.fr.settings.lmi == LMI_ANSI) ? 7 : 6; + if (lmi == LMI_ANSI) { + if (skb->data[6] != LMI_ANSI_LOCKSHIFT) { + printk(KERN_INFO "%s: Not ANSI locking shift in LMI" + " message (0x%02X)\n", dev->name, skb->data[6]); + return 1; + } + i = 7; + } else + i = 6; - if (skb->data[i] != - ((hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_REPTYPE : LMI_REPTYPE)) { - printk(KERN_INFO "%s: Not a report type=%x\n", + if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_REPTYPE : + LMI_ANSI_CISCO_REPTYPE)) { + printk(KERN_INFO "%s: Not an LMI Report type IE (0x%02X)\n", dev->name, skb->data[i]); return 1; } - i++; - i++; /* Skip length field */ + if (skb->data[++i] != LMI_REPT_LEN) { + printk(KERN_INFO "%s: Invalid LMI Report type IE length" + " (%u)\n", dev->name, skb->data[i]); + return 1; + } - reptype = skb->data[i++]; + reptype = skb->data[++i]; + if (reptype != LMI_INTEGRITY && reptype != LMI_FULLREP) { + printk(KERN_INFO "%s: Unsupported LMI Report type (0x%02X)\n", + dev->name, reptype); + return 1; + } - if (skb->data[i]!= - ((hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_ALIVE : LMI_ALIVE)) { - printk(KERN_INFO "%s: Unsupported status element=%x\n", - dev->name, skb->data[i]); + if (skb->data[++i] != (lmi == LMI_CCITT ? LMI_CCITT_ALIVE : + LMI_ANSI_CISCO_ALIVE)) { + printk(KERN_INFO "%s: Not an LMI Link integrity verification" + " IE (0x%02X)\n", dev->name, skb->data[i]); return 1; } - i++; - i++; /* Skip length field */ + if (skb->data[++i] != LMI_INTEG_LEN) { + printk(KERN_INFO "%s: Invalid LMI Link integrity verification" + " IE length (%u)\n", dev->name, skb->data[i]); + return 1; + } + i++; hdlc->state.fr.rxseq = skb->data[i++]; /* TX sequence from peer */ rxseq = skb->data[i++]; /* Should confirm our sequence */ txseq = hdlc->state.fr.txseq; - if (hdlc->state.fr.settings.dce) { - if (reptype != LMI_FULLREP && reptype != LMI_INTEGRITY) { - printk(KERN_INFO "%s: Unsupported report type=%x\n", - dev->name, reptype); - return 1; - } + if (dce) hdlc->state.fr.last_poll = jiffies; - } error = 0; if (!hdlc->state.fr.reliable) @@ -703,7 +727,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) error = 1; } - if (hdlc->state.fr.settings.dce) { + if (dce) { if (hdlc->state.fr.fullrep_sent && !error) { /* Stop sending full report - the last one has been confirmed by DTE */ hdlc->state.fr.fullrep_sent = 0; @@ -725,6 +749,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) hdlc->state.fr.dce_changed = 0; } + hdlc->state.fr.request = 1; /* got request */ fr_lmi_send(dev, reptype == LMI_FULLREP ? 1 : 0); return 0; } @@ -739,7 +764,6 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) if (reptype != LMI_FULLREP) return 0; - stat_len = 3; pvc = hdlc->state.fr.first_pvc; while (pvc) { @@ -750,24 +774,35 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) no_ram = 0; while (skb->len >= i + 2 + stat_len) { u16 dlci; + u32 bw; unsigned int active, new; - if (skb->data[i] != ((hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_PVCSTAT : LMI_PVCSTAT)) { - printk(KERN_WARNING "%s: Invalid PVCSTAT ID: %x\n", - dev->name, skb->data[i]); + if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT : + LMI_ANSI_CISCO_PVCSTAT)) { + printk(KERN_INFO "%s: Not an LMI PVC status IE" + " (0x%02X)\n", dev->name, skb->data[i]); return 1; } - i++; - if (skb->data[i] != stat_len) { - printk(KERN_WARNING "%s: Invalid PVCSTAT length: %x\n", - dev->name, skb->data[i]); + if (skb->data[++i] != stat_len) { + printk(KERN_INFO "%s: Invalid LMI PVC status IE length" + " (%u)\n", dev->name, skb->data[i]); return 1; } i++; - dlci = status_to_dlci(skb->data + i, &active, &new); + new = !! (skb->data[i + 2] & 0x08); + active = !! (skb->data[i + 2] & 0x02); + if (lmi == LMI_CISCO) { + dlci = (skb->data[i] << 8) | skb->data[i + 1]; + bw = (skb->data[i + 3] << 16) | + (skb->data[i + 4] << 8) | + (skb->data[i + 5]); + } else { + dlci = ((skb->data[i] & 0x3F) << 4) | + ((skb->data[i + 1] & 0x78) >> 3); + bw = 0; + } pvc = add_pvc(dev, dlci); @@ -783,9 +818,11 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) pvc->state.deleted = 0; if (active != pvc->state.active || new != pvc->state.new || + bw != pvc->state.bandwidth || !pvc->state.exist) { pvc->state.new = new; pvc->state.active = active; + pvc->state.bandwidth = bw; pvc_carrier(active, pvc); fr_log_dlci_active(pvc); } @@ -801,6 +838,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) pvc_carrier(0, pvc); pvc->state.active = pvc->state.new = 0; pvc->state.exist = 0; + pvc->state.bandwidth = 0; fr_log_dlci_active(pvc); } pvc = pvc->next; @@ -829,22 +867,15 @@ static int fr_rx(struct sk_buff *skb) dlci = q922_to_dlci(skb->data); - if (dlci == LMI_DLCI) { - if (hdlc->state.fr.settings.lmi == LMI_NONE) - goto rx_error; /* LMI packet with no LMI? */ - - if (data[3] == LMI_PROTO) { - if (fr_lmi_recv(ndev, skb)) - goto rx_error; - else { - dev_kfree_skb_any(skb); - return NET_RX_SUCCESS; - } - } - - printk(KERN_INFO "%s: Received non-LMI frame with LMI DLCI\n", - ndev->name); - goto rx_error; + if ((dlci == LMI_CCITT_ANSI_DLCI && + (hdlc->state.fr.settings.lmi == LMI_ANSI || + hdlc->state.fr.settings.lmi == LMI_CCITT)) || + (dlci == LMI_CISCO_DLCI && + hdlc->state.fr.settings.lmi == LMI_CISCO)) { + if (fr_lmi_recv(ndev, skb)) + goto rx_error; + dev_kfree_skb_any(skb); + return NET_RX_SUCCESS; } pvc = find_pvc(hdlc, dlci); @@ -1170,7 +1201,8 @@ int hdlc_fr_ioctl(struct net_device *dev, struct ifreq *ifr) if ((new_settings.lmi != LMI_NONE && new_settings.lmi != LMI_ANSI && - new_settings.lmi != LMI_CCITT) || + new_settings.lmi != LMI_CCITT && + new_settings.lmi != LMI_CISCO) || new_settings.t391 < 1 || new_settings.t392 < 2 || new_settings.n391 < 1 || diff --git a/drivers/net/wan/hdlc_generic.c b/drivers/net/wan/hdlc_generic.c index 6ed064cb446..a63f6a2cc4f 100644 --- a/drivers/net/wan/hdlc_generic.c +++ b/drivers/net/wan/hdlc_generic.c @@ -1,7 +1,7 @@ /* * Generic HDLC support routines for Linux * - * Copyright (C) 1999 - 2003 Krzysztof Halasa <khc@pm.waw.pl> + * Copyright (C) 1999 - 2005 Krzysztof Halasa <khc@pm.waw.pl> * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -38,7 +38,7 @@ #include <linux/hdlc.h> -static const char* version = "HDLC support module revision 1.17"; +static const char* version = "HDLC support module revision 1.18"; #undef DEBUG_LINK @@ -126,10 +126,13 @@ void hdlc_set_carrier(int on, struct net_device *dev) if (!hdlc->open) goto carrier_exit; - if (hdlc->carrier) + if (hdlc->carrier) { + printk(KERN_INFO "%s: Carrier detected\n", dev->name); __hdlc_set_carrier_on(dev); - else + } else { + printk(KERN_INFO "%s: Carrier lost\n", dev->name); __hdlc_set_carrier_off(dev); + } carrier_exit: spin_unlock_irqrestore(&hdlc->state_lock, flags); @@ -157,8 +160,11 @@ int hdlc_open(struct net_device *dev) spin_lock_irq(&hdlc->state_lock); - if (hdlc->carrier) + if (hdlc->carrier) { + printk(KERN_INFO "%s: Carrier detected\n", dev->name); __hdlc_set_carrier_on(dev); + } else + printk(KERN_INFO "%s: No carrier\n", dev->name); hdlc->open = 1; diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index 15e545f66cd..2b948ea397d 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -723,7 +723,7 @@ static void lmc_watchdog (unsigned long data) /*fold00*/ /* lmc_reset (sc); Why reset??? The link can go down ok */ /* Inform the world that link has been lost */ - dev->flags &= ~IFF_RUNNING; + netif_carrier_off(dev); } /* @@ -736,7 +736,7 @@ static void lmc_watchdog (unsigned long data) /*fold00*/ /* lmc_reset (sc); Again why reset??? */ /* Inform the world that link protocol is back up. */ - dev->flags |= IFF_RUNNING; + netif_carrier_on(dev); /* Now we have to tell the syncppp that we had an outage * and that it should deal. Calling sppp_reopen here @@ -1168,8 +1168,6 @@ static void lmc_running_reset (struct net_device *dev) /*fold00*/ sc->lmc_media->set_link_status (sc, 1); sc->lmc_media->set_status (sc, NULL); - //dev->flags |= IFF_RUNNING; - netif_wake_queue(dev); sc->lmc_txfull = 0; @@ -1233,8 +1231,6 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/ csr6 &= ~LMC_DEC_SR; /* Turn off the Receive bit */ LMC_CSR_WRITE (sc, csr_command, csr6); - dev->flags &= ~IFF_RUNNING; - sc->stats.rx_missed_errors += LMC_CSR_READ (sc, csr_missed_frames) & 0xffff; diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 0aaa12c0c09..1d3231cc471 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -323,7 +323,7 @@ config PRISM54 For a complete list of supported cards visit <http://prism54.org>. Here is the latest confirmed list of supported cards: - 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 + 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1) Allnet ALL0271 PCI Card Compex WL54G Cardbus Card Corega CG-WLCB54GT Cardbus Card diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 463c789cdc7..fb10a2db63a 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -754,7 +754,7 @@ typedef struct { u8 zero; u8 ssidLen; u8 ssid[32]; - u16 rssi; + u16 dBm; #define CAP_ESS (1<<0) #define CAP_IBSS (1<<1) #define CAP_PRIVACY (1<<4) @@ -1125,6 +1125,9 @@ static int micsetup(struct airo_info *ai); static int encapsulate(struct airo_info *ai, etherHead *pPacket, MICBuffer *buffer, int len); static int decapsulate(struct airo_info *ai, MICBuffer *mic, etherHead *pPacket, u16 payLen); +static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi); +static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm); + #include <linux/crypto.h> #endif @@ -1713,6 +1716,7 @@ static int readBSSListRid(struct airo_info *ai, int first, list->fh.dwell = le16_to_cpu(list->fh.dwell); list->dsChannel = le16_to_cpu(list->dsChannel); list->atimWindow = le16_to_cpu(list->atimWindow); + list->dBm = le16_to_cpu(list->dBm); return rc; } @@ -3245,7 +3249,10 @@ badrx: wstats.level = 0x100 - apriv->rssi[hdr.rssi[1]].rssidBm; else wstats.level = (hdr.rssi[1] + 321) / 2; - wstats.updated = 3; + wstats.noise = apriv->wstats.qual.noise; + wstats.updated = IW_QUAL_LEVEL_UPDATED + | IW_QUAL_QUAL_UPDATED + | IW_QUAL_NOISE_UPDATED; /* Update spy records */ wireless_spy_update(dev, sa, &wstats); } @@ -3588,7 +3595,10 @@ void mpi_receive_802_11 (struct airo_info *ai) wstats.level = 0x100 - ai->rssi[hdr.rssi[1]].rssidBm; else wstats.level = (hdr.rssi[1] + 321) / 2; - wstats.updated = 3; + wstats.noise = ai->wstats.qual.noise; + wstats.updated = IW_QUAL_QUAL_UPDATED + | IW_QUAL_LEVEL_UPDATED + | IW_QUAL_NOISE_UPDATED; /* Update spy records */ wireless_spy_update(ai->dev, sa, &wstats); } @@ -3679,7 +3689,7 @@ static u16 setup_card(struct airo_info *ai, u8 *mac, int lock) status = PC4500_readrid(ai,RID_RSSI,&rssi_rid,sizeof(rssi_rid),lock); if ( status == SUCCESS ) { if (ai->rssi || (ai->rssi = kmalloc(512, GFP_KERNEL)) != NULL) - memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512); + memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512); /* Skip RID length member */ } else { if (ai->rssi) { @@ -5348,7 +5358,7 @@ static int proc_BSSList_open( struct inode *inode, struct file *file ) { (int)BSSList_rid.bssid[5], (int)BSSList_rid.ssidLen, BSSList_rid.ssid, - (int)BSSList_rid.rssi); + (int)BSSList_rid.dBm); ptr += sprintf(ptr, " channel = %d %s %s %s %s\n", (int)BSSList_rid.dsChannel, BSSList_rid.cap & CAP_ESS ? "ESS" : "", @@ -5593,6 +5603,29 @@ static void __exit airo_cleanup_module( void ) * would not work at all... - Jean II */ +static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi) +{ + if( !rssi_rid ) + return 0; + + return (0x100 - rssi_rid[rssi].rssidBm); +} + +static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm) +{ + int i; + + if( !rssi_rid ) + return 0; + + for( i = 0; i < 256; i++ ) + if (rssi_rid[i].rssidBm == dbm) + return rssi_rid[i].rssipct; + + return 0; +} + + static int airo_get_quality (StatusRid *status_rid, CapabilityRid *cap_rid) { int quality = 0; @@ -6443,11 +6476,29 @@ static int airo_get_range(struct net_device *dev, } range->num_frequency = k; + range->sensitivity = 65535; + /* Hum... Should put the right values there */ - range->max_qual.qual = airo_get_max_quality(&cap_rid); - range->max_qual.level = 0x100 - 120; /* -120 dBm */ + if (local->rssi) + range->max_qual.qual = 100; /* % */ + else + range->max_qual.qual = airo_get_max_quality(&cap_rid); + range->max_qual.level = 0; /* 0 means we use dBm */ range->max_qual.noise = 0; - range->sensitivity = 65535; + range->max_qual.updated = 0; + + /* Experimental measurements - boundary 11/5.5 Mb/s */ + /* Note : with or without the (local->rssi), results + * are somewhat different. - Jean II */ + if (local->rssi) { + range->avg_qual.qual = 50; /* % */ + range->avg_qual.level = 186; /* -70 dBm */ + } else { + range->avg_qual.qual = airo_get_avg_quality(&cap_rid); + range->avg_qual.level = 176; /* -80 dBm */ + } + range->avg_qual.noise = 0; + range->avg_qual.updated = 0; for(i = 0 ; i < 8 ; i++) { range->bitrate[i] = cap_rid.supportedRates[i] * 500000; @@ -6508,15 +6559,6 @@ static int airo_get_range(struct net_device *dev, range->max_retry = 65535; range->min_r_time = 1024; range->max_r_time = 65535 * 1024; - /* Experimental measurements - boundary 11/5.5 Mb/s */ - /* Note : with or without the (local->rssi), results - * are somewhat different. - Jean II */ - range->avg_qual.qual = airo_get_avg_quality(&cap_rid); - if (local->rssi) - range->avg_qual.level = 186; /* -70 dBm */ - else - range->avg_qual.level = 176; /* -80 dBm */ - range->avg_qual.noise = 0; /* Event capability (kernel + driver) */ range->event_capa[0] = (IW_EVENT_CAPA_K_0 | @@ -6676,12 +6718,18 @@ static int airo_get_aplist(struct net_device *dev, loseSync = 0; memcpy(address[i].sa_data, BSSList.bssid, ETH_ALEN); address[i].sa_family = ARPHRD_ETHER; - if (local->rssi) - qual[i].level = 0x100 - local->rssi[BSSList.rssi].rssidBm; - else - qual[i].level = (BSSList.rssi + 321) / 2; - qual[i].qual = qual[i].noise = 0; - qual[i].updated = 2; + if (local->rssi) { + qual[i].level = 0x100 - BSSList.dBm; + qual[i].qual = airo_dbm_to_pct( local->rssi, BSSList.dBm ); + qual[i].updated = IW_QUAL_QUAL_UPDATED; + } else { + qual[i].level = (BSSList.dBm + 321) / 2; + qual[i].qual = 0; + qual[i].updated = IW_QUAL_QUAL_INVALID; + } + qual[i].noise = local->wstats.qual.noise; + qual[i].updated = IW_QUAL_LEVEL_UPDATED + | IW_QUAL_NOISE_UPDATED; if (BSSList.index == 0xffff) break; } @@ -6760,7 +6808,7 @@ static int airo_set_scan(struct net_device *dev, static inline char *airo_translate_scan(struct net_device *dev, char *current_ev, char *end_buf, - BSSListRid *list) + BSSListRid *bss) { struct airo_info *ai = dev->priv; struct iw_event iwe; /* Temporary buffer */ @@ -6771,22 +6819,22 @@ static inline char *airo_translate_scan(struct net_device *dev, /* First entry *MUST* be the AP MAC address */ iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; - memcpy(iwe.u.ap_addr.sa_data, list->bssid, ETH_ALEN); + memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN); current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); /* Other entries will be displayed in the order we give them */ /* Add the ESSID */ - iwe.u.data.length = list->ssidLen; + iwe.u.data.length = bss->ssidLen; if(iwe.u.data.length > 32) iwe.u.data.length = 32; iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, list->ssid); + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid); /* Add mode */ iwe.cmd = SIOCGIWMODE; - capabilities = le16_to_cpu(list->cap); + capabilities = le16_to_cpu(bss->cap); if(capabilities & (CAP_ESS | CAP_IBSS)) { if(capabilities & CAP_ESS) iwe.u.mode = IW_MODE_MASTER; @@ -6797,19 +6845,25 @@ static inline char *airo_translate_scan(struct net_device *dev, /* Add frequency */ iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = le16_to_cpu(list->dsChannel); + iwe.u.freq.m = le16_to_cpu(bss->dsChannel); iwe.u.freq.m = frequency_list[iwe.u.freq.m] * 100000; iwe.u.freq.e = 1; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); /* Add quality statistics */ iwe.cmd = IWEVQUAL; - if (ai->rssi) - iwe.u.qual.level = 0x100 - ai->rssi[list->rssi].rssidBm; - else - iwe.u.qual.level = (list->rssi + 321) / 2; - iwe.u.qual.noise = 0; - iwe.u.qual.qual = 0; + if (ai->rssi) { + iwe.u.qual.level = 0x100 - bss->dBm; + iwe.u.qual.qual = airo_dbm_to_pct( ai->rssi, bss->dBm ); + iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED; + } else { + iwe.u.qual.level = (bss->dBm + 321) / 2; + iwe.u.qual.qual = 0; + iwe.u.qual.updated = IW_QUAL_QUAL_INVALID; + } + iwe.u.qual.noise = ai->wstats.qual.noise; + iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED + | IW_QUAL_NOISE_UPDATED; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); /* Add encryption capability */ @@ -6819,7 +6873,7 @@ static inline char *airo_translate_scan(struct net_device *dev, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, list->ssid); + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid); /* Rate : stuffing multiple values in a single event require a bit * more of magic - Jean II */ @@ -6831,10 +6885,10 @@ static inline char *airo_translate_scan(struct net_device *dev, /* Max 8 values */ for(i = 0 ; i < 8 ; i++) { /* NULL terminated */ - if(list->rates[i] == 0) + if(bss->rates[i] == 0) break; /* Bit rate given in 500 kb/s units (+ 0x80) */ - iwe.u.bitrate.value = ((list->rates[i] & 0x7f) * 500000); + iwe.u.bitrate.value = ((bss->rates[i] & 0x7f) * 500000); /* Add new value to event */ current_val = iwe_stream_add_value(current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN); } @@ -7153,18 +7207,22 @@ static void airo_read_wireless_stats(struct airo_info *local) /* The status */ local->wstats.status = status_rid.mode; - /* Signal quality and co. But where is the noise level ??? */ - local->wstats.qual.qual = airo_get_quality(&status_rid, &cap_rid); - if (local->rssi) - local->wstats.qual.level = 0x100 - local->rssi[status_rid.sigQuality].rssidBm; - else + /* Signal quality and co */ + if (local->rssi) { + local->wstats.qual.level = airo_rssi_to_dbm( local->rssi, status_rid.sigQuality ); + /* normalizedSignalStrength appears to be a percentage */ + local->wstats.qual.qual = status_rid.normalizedSignalStrength; + } else { local->wstats.qual.level = (status_rid.normalizedSignalStrength + 321) / 2; + local->wstats.qual.qual = airo_get_quality(&status_rid, &cap_rid); + } + local->wstats.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED; if (status_rid.len >= 124) { - local->wstats.qual.noise = 256 - status_rid.noisedBm; - local->wstats.qual.updated = 7; + local->wstats.qual.noise = 0x100 - status_rid.noisedBm; + local->wstats.qual.updated |= IW_QUAL_NOISE_UPDATED; } else { local->wstats.qual.noise = 0; - local->wstats.qual.updated = 3; + local->wstats.qual.updated |= IW_QUAL_NOISE_INVALID; } /* Packets discarded in the wireless adapter due to wireless diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index a91b507e0a7..a4ed28d9c78 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -321,6 +321,7 @@ static struct { { 0x01bf, 0x3302, NULL, ATMEL_FW_TYPE_502E, "Belkin F5D6020-V2" }, { 0, 0, "BT/Voyager 1020 Laptop Adapter", ATMEL_FW_TYPE_502, "BT Voyager 1020" }, { 0, 0, "IEEE 802.11b/Wireless LAN PC Card", ATMEL_FW_TYPE_502, "Siemens Gigaset PC Card II" }, + { 0, 0, "IEEE 802.11b/Wireless LAN Card S", ATMEL_FW_TYPE_504_2958, "Siemens Gigaset PC Card II" }, { 0, 0, "CNet/CNWLC 11Mbps Wireless PC Card V-5", ATMEL_FW_TYPE_502E, "CNet CNWLC-811ARL" }, { 0, 0, "Wireless/PC_CARD", ATMEL_FW_TYPE_502D, "Planet WL-3552" }, { 0, 0, "OEM/11Mbps Wireless LAN PC Card V-3", ATMEL_FW_TYPE_502, "OEM 11Mbps WLAN PCMCIA Card" }, diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index a3a32430ae9..b1078baa1d5 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -492,6 +492,9 @@ EXPORT_SYMBOL(orinoco_debug); static int suppress_linkstatus; /* = 0 */ module_param(suppress_linkstatus, bool, 0644); MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); +static int ignore_disconnect; /* = 0 */ +module_param(ignore_disconnect, int, 0644); +MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer"); /********************************************************************/ /* Compile time configuration and compatibility stuff */ @@ -604,7 +607,6 @@ struct hermes_rx_descriptor { static int orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static int __orinoco_program_rids(struct net_device *dev); static void __orinoco_set_multicast_list(struct net_device *dev); -static int orinoco_debug_dump_recs(struct net_device *dev); /********************************************************************/ /* Internal helper functions */ @@ -655,7 +657,7 @@ static int orinoco_open(struct net_device *dev) return err; } -int orinoco_stop(struct net_device *dev) +static int orinoco_stop(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); int err = 0; @@ -686,7 +688,7 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) struct orinoco_private *priv = netdev_priv(dev); hermes_t *hw = &priv->hw; struct iw_statistics *wstats = &priv->wstats; - int err = 0; + int err; unsigned long flags; if (! netif_device_present(dev)) { @@ -695,9 +697,21 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) return NULL; /* FIXME: Can we do better than this? */ } + /* If busy, return the old stats. Returning NULL may cause + * the interface to disappear from /proc/net/wireless */ if (orinoco_lock(priv, &flags) != 0) - return NULL; /* FIXME: Erg, we've been signalled, how - * do we propagate this back up? */ + return wstats; + + /* We can't really wait for the tallies inquiry command to + * complete, so we just use the previous results and trigger + * a new tallies inquiry command for next time - Jean II */ + /* FIXME: Really we should wait for the inquiry to come back - + * as it is the stats we give don't make a whole lot of sense. + * Unfortunately, it's not clear how to do that within the + * wireless extensions framework: I think we're in user + * context, but a lock seems to be held by the time we get in + * here so we're not safe to sleep here. */ + hermes_inquire(hw, HERMES_INQ_TALLIES); if (priv->iw_mode == IW_MODE_ADHOC) { memset(&wstats->qual, 0, sizeof(wstats->qual)); @@ -716,25 +730,16 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_COMMSQUALITY, &cq); - - wstats->qual.qual = (int)le16_to_cpu(cq.qual); - wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; - wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; - wstats->qual.updated = 7; + + if (!err) { + wstats->qual.qual = (int)le16_to_cpu(cq.qual); + wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; + wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; + wstats->qual.updated = 7; + } } - /* We can't really wait for the tallies inquiry command to - * complete, so we just use the previous results and trigger - * a new tallies inquiry command for next time - Jean II */ - /* FIXME: We're in user context (I think?), so we should just - wait for the tallies to come through */ - err = hermes_inquire(hw, HERMES_INQ_TALLIES); - orinoco_unlock(priv, &flags); - - if (err) - return NULL; - return wstats; } @@ -1275,9 +1280,10 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) len = sizeof(tallies); } - /* Read directly the data (no seek) */ - hermes_read_words(hw, HERMES_DATA1, (void *) &tallies, - len / 2); /* FIXME: blech! */ + err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len, + infofid, sizeof(info)); + if (err) + break; /* Increment our various counters */ /* wstats->discard.nwid - no wrong BSSID stuff */ @@ -1307,8 +1313,10 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) break; } - hermes_read_words(hw, HERMES_DATA1, (void *) &linkstatus, - len / 2); + err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len, + infofid, sizeof(info)); + if (err) + break; newstatus = le16_to_cpu(linkstatus.linkstatus); connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) @@ -1317,7 +1325,7 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) if (connected) netif_carrier_on(dev); - else + else if (!ignore_disconnect) netif_carrier_off(dev); if (newstatus != priv->last_linkstatus) @@ -1350,6 +1358,8 @@ int __orinoco_up(struct net_device *dev) struct hermes *hw = &priv->hw; int err; + netif_carrier_off(dev); /* just to make sure */ + err = __orinoco_program_rids(dev); if (err) { printk(KERN_ERR "%s: Error %d configuring card\n", @@ -1413,7 +1423,7 @@ int orinoco_reinit_firmware(struct net_device *dev) return err; err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); - if (err == -EIO) { + if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) { /* Try workaround for old Symbol firmware bug */ printk(KERN_WARNING "%s: firmware ALLOC bug detected " "(old Symbol firmware?). Trying to work around... ", @@ -1610,17 +1620,15 @@ static int __orinoco_program_rids(struct net_device *dev) return err; } /* Set the channel/frequency */ - if (priv->channel == 0) { - printk(KERN_DEBUG "%s: Channel is 0 in __orinoco_program_rids()\n", dev->name); - if (priv->createibss) - priv->channel = 10; - } - err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFOWNCHANNEL, - priv->channel); - if (err) { - printk(KERN_ERR "%s: Error %d setting channel\n", - dev->name, err); - return err; + if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFOWNCHANNEL, + priv->channel); + if (err) { + printk(KERN_ERR "%s: Error %d setting channel %d\n", + dev->name, err, priv->channel); + return err; + } } if (priv->has_ibss) { @@ -1916,7 +1924,7 @@ static void orinoco_reset(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); struct hermes *hw = &priv->hw; - int err = 0; + int err; unsigned long flags; if (orinoco_lock(priv, &flags) != 0) @@ -1938,20 +1946,20 @@ static void orinoco_reset(struct net_device *dev) orinoco_unlock(priv, &flags); - if (priv->hard_reset) + if (priv->hard_reset) { err = (*priv->hard_reset)(priv); - if (err) { - printk(KERN_ERR "%s: orinoco_reset: Error %d " - "performing hard reset\n", dev->name, err); - /* FIXME: shutdown of some sort */ - return; + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d " + "performing hard reset\n", dev->name, err); + goto disable; + } } err = orinoco_reinit_firmware(dev); if (err) { printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", dev->name, err); - return; + goto disable; } spin_lock_irq(&priv->lock); /* This has to be called from user context */ @@ -1972,6 +1980,10 @@ static void orinoco_reset(struct net_device *dev) spin_unlock_irq(&priv->lock); return; + disable: + hermes_set_irqmask(hw, 0); + netif_device_detach(dev); + printk(KERN_ERR "%s: Device has been disabled!\n", dev->name); } /********************************************************************/ @@ -2056,7 +2068,7 @@ irqreturn_t orinoco_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (events & HERMES_EV_ALLOC) __orinoco_ev_alloc(dev, hw); - hermes_write_regn(hw, EVACK, events); + hermes_write_regn(hw, EVACK, evstat); evstat = hermes_read_regn(hw, EVSTAT); events = evstat & hw->inten; @@ -2215,6 +2227,8 @@ static int determine_firmware(struct net_device *dev) firmver >= 0x31000; priv->has_preamble = (firmver >= 0x20000); priv->ibss_port = 4; + priv->broken_disableport = (firmver == 0x25013) || + (firmver >= 0x30000 && firmver <= 0x31000); /* Tested with Intel firmware : 0x20015 => Jean II */ /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ break; @@ -2267,7 +2281,7 @@ static int orinoco_init(struct net_device *dev) priv->nicbuf_size = IEEE802_11_FRAME_LEN + ETH_HLEN; /* Initialize the firmware */ - err = hermes_init(hw); + err = orinoco_reinit_firmware(dev); if (err != 0) { printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n", dev->name, err); @@ -2400,31 +2414,12 @@ static int orinoco_init(struct net_device *dev) /* By default use IEEE/IBSS ad-hoc mode if we have it */ priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss); set_port_type(priv); - priv->channel = 10; /* default channel, more-or-less arbitrary */ + priv->channel = 0; /* use firmware default */ priv->promiscuous = 0; priv->wep_on = 0; priv->tx_key = 0; - err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); - if (err == -EIO) { - /* Try workaround for old Symbol firmware bug */ - printk(KERN_WARNING "%s: firmware ALLOC bug detected " - "(old Symbol firmware?). Trying to work around... ", - dev->name); - - priv->nicbuf_size = TX_NICBUF_SIZE_BUG; - err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); - if (err) - printk("failed!\n"); - else - printk("ok.\n"); - } - if (err) { - printk("%s: Error %d allocating Tx buffer\n", dev->name, err); - goto out; - } - /* Make the hardware available, as long as it hasn't been * removed elsewhere (e.g. by PCMCIA hot unplug) */ spin_lock_irq(&priv->lock); @@ -2450,7 +2445,7 @@ struct net_device *alloc_orinocodev(int sizeof_card, priv = netdev_priv(dev); priv->ndev = dev; if (sizeof_card) - priv->card = (void *)((unsigned long)netdev_priv(dev) + priv->card = (void *)((unsigned long)priv + sizeof(struct orinoco_private)); else priv->card = NULL; @@ -2555,6 +2550,7 @@ static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, } len = le16_to_cpu(essidbuf.len); + BUG_ON(len > IW_ESSID_MAX_SIZE); memset(buf, 0, IW_ESSID_MAX_SIZE+1); memcpy(buf, p, len); @@ -2923,13 +2919,14 @@ static int orinoco_ioctl_setessid(struct net_device *dev, struct iw_point *erq) memset(&essidbuf, 0, sizeof(essidbuf)); if (erq->flags) { - if (erq->length > IW_ESSID_MAX_SIZE) + /* iwconfig includes the NUL in the specified length */ + if (erq->length > IW_ESSID_MAX_SIZE+1) return -E2BIG; if (copy_from_user(&essidbuf, erq->pointer, erq->length)) return -EFAULT; - essidbuf[erq->length] = '\0'; + essidbuf[IW_ESSID_MAX_SIZE] = '\0'; } if (orinoco_lock(priv, &flags) != 0) @@ -3855,7 +3852,6 @@ orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_ibssport" }, - { SIOCIWLASTPRIV, 0, 0, "dump_recs" }, }; wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]); @@ -3943,14 +3939,6 @@ orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) err = orinoco_ioctl_getibssport(dev, wrq); break; - case SIOCIWLASTPRIV: - err = orinoco_debug_dump_recs(dev); - if (err) - printk(KERN_ERR "%s: Unable to dump records (%d)\n", - dev->name, err); - break; - - default: err = -EOPNOTSUPP; } @@ -3964,187 +3952,6 @@ orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return err; } -struct { - u16 rid; - char *name; - int displaytype; -#define DISPLAY_WORDS 0 -#define DISPLAY_BYTES 1 -#define DISPLAY_STRING 2 -#define DISPLAY_XSTRING 3 -} record_table[] = { -#define DEBUG_REC(name,type) { HERMES_RID_##name, #name, DISPLAY_##type } - DEBUG_REC(CNFPORTTYPE,WORDS), - DEBUG_REC(CNFOWNMACADDR,BYTES), - DEBUG_REC(CNFDESIREDSSID,STRING), - DEBUG_REC(CNFOWNCHANNEL,WORDS), - DEBUG_REC(CNFOWNSSID,STRING), - DEBUG_REC(CNFOWNATIMWINDOW,WORDS), - DEBUG_REC(CNFSYSTEMSCALE,WORDS), - DEBUG_REC(CNFMAXDATALEN,WORDS), - DEBUG_REC(CNFPMENABLED,WORDS), - DEBUG_REC(CNFPMEPS,WORDS), - DEBUG_REC(CNFMULTICASTRECEIVE,WORDS), - DEBUG_REC(CNFMAXSLEEPDURATION,WORDS), - DEBUG_REC(CNFPMHOLDOVERDURATION,WORDS), - DEBUG_REC(CNFOWNNAME,STRING), - DEBUG_REC(CNFOWNDTIMPERIOD,WORDS), - DEBUG_REC(CNFMULTICASTPMBUFFERING,WORDS), - DEBUG_REC(CNFWEPENABLED_AGERE,WORDS), - DEBUG_REC(CNFMANDATORYBSSID_SYMBOL,WORDS), - DEBUG_REC(CNFWEPDEFAULTKEYID,WORDS), - DEBUG_REC(CNFDEFAULTKEY0,BYTES), - DEBUG_REC(CNFDEFAULTKEY1,BYTES), - DEBUG_REC(CNFMWOROBUST_AGERE,WORDS), - DEBUG_REC(CNFDEFAULTKEY2,BYTES), - DEBUG_REC(CNFDEFAULTKEY3,BYTES), - DEBUG_REC(CNFWEPFLAGS_INTERSIL,WORDS), - DEBUG_REC(CNFWEPKEYMAPPINGTABLE,WORDS), - DEBUG_REC(CNFAUTHENTICATION,WORDS), - DEBUG_REC(CNFMAXASSOCSTA,WORDS), - DEBUG_REC(CNFKEYLENGTH_SYMBOL,WORDS), - DEBUG_REC(CNFTXCONTROL,WORDS), - DEBUG_REC(CNFROAMINGMODE,WORDS), - DEBUG_REC(CNFHOSTAUTHENTICATION,WORDS), - DEBUG_REC(CNFRCVCRCERROR,WORDS), - DEBUG_REC(CNFMMLIFE,WORDS), - DEBUG_REC(CNFALTRETRYCOUNT,WORDS), - DEBUG_REC(CNFBEACONINT,WORDS), - DEBUG_REC(CNFAPPCFINFO,WORDS), - DEBUG_REC(CNFSTAPCFINFO,WORDS), - DEBUG_REC(CNFPRIORITYQUSAGE,WORDS), - DEBUG_REC(CNFTIMCTRL,WORDS), - DEBUG_REC(CNFTHIRTY2TALLY,WORDS), - DEBUG_REC(CNFENHSECURITY,WORDS), - DEBUG_REC(CNFGROUPADDRESSES,BYTES), - DEBUG_REC(CNFCREATEIBSS,WORDS), - DEBUG_REC(CNFFRAGMENTATIONTHRESHOLD,WORDS), - DEBUG_REC(CNFRTSTHRESHOLD,WORDS), - DEBUG_REC(CNFTXRATECONTROL,WORDS), - DEBUG_REC(CNFPROMISCUOUSMODE,WORDS), - DEBUG_REC(CNFBASICRATES_SYMBOL,WORDS), - DEBUG_REC(CNFPREAMBLE_SYMBOL,WORDS), - DEBUG_REC(CNFSHORTPREAMBLE,WORDS), - DEBUG_REC(CNFWEPKEYS_AGERE,BYTES), - DEBUG_REC(CNFEXCLUDELONGPREAMBLE,WORDS), - DEBUG_REC(CNFTXKEY_AGERE,WORDS), - DEBUG_REC(CNFAUTHENTICATIONRSPTO,WORDS), - DEBUG_REC(CNFBASICRATES,WORDS), - DEBUG_REC(CNFSUPPORTEDRATES,WORDS), - DEBUG_REC(CNFTICKTIME,WORDS), - DEBUG_REC(CNFSCANREQUEST,WORDS), - DEBUG_REC(CNFJOINREQUEST,WORDS), - DEBUG_REC(CNFAUTHENTICATESTATION,WORDS), - DEBUG_REC(CNFCHANNELINFOREQUEST,WORDS), - DEBUG_REC(MAXLOADTIME,WORDS), - DEBUG_REC(DOWNLOADBUFFER,WORDS), - DEBUG_REC(PRIID,WORDS), - DEBUG_REC(PRISUPRANGE,WORDS), - DEBUG_REC(CFIACTRANGES,WORDS), - DEBUG_REC(NICSERNUM,XSTRING), - DEBUG_REC(NICID,WORDS), - DEBUG_REC(MFISUPRANGE,WORDS), - DEBUG_REC(CFISUPRANGE,WORDS), - DEBUG_REC(CHANNELLIST,WORDS), - DEBUG_REC(REGULATORYDOMAINS,WORDS), - DEBUG_REC(TEMPTYPE,WORDS), -/* DEBUG_REC(CIS,BYTES), */ - DEBUG_REC(STAID,WORDS), - DEBUG_REC(CURRENTSSID,STRING), - DEBUG_REC(CURRENTBSSID,BYTES), - DEBUG_REC(COMMSQUALITY,WORDS), - DEBUG_REC(CURRENTTXRATE,WORDS), - DEBUG_REC(CURRENTBEACONINTERVAL,WORDS), - DEBUG_REC(CURRENTSCALETHRESHOLDS,WORDS), - DEBUG_REC(PROTOCOLRSPTIME,WORDS), - DEBUG_REC(SHORTRETRYLIMIT,WORDS), - DEBUG_REC(LONGRETRYLIMIT,WORDS), - DEBUG_REC(MAXTRANSMITLIFETIME,WORDS), - DEBUG_REC(MAXRECEIVELIFETIME,WORDS), - DEBUG_REC(CFPOLLABLE,WORDS), - DEBUG_REC(AUTHENTICATIONALGORITHMS,WORDS), - DEBUG_REC(PRIVACYOPTIONIMPLEMENTED,WORDS), - DEBUG_REC(OWNMACADDR,BYTES), - DEBUG_REC(SCANRESULTSTABLE,WORDS), - DEBUG_REC(PHYTYPE,WORDS), - DEBUG_REC(CURRENTCHANNEL,WORDS), - DEBUG_REC(CURRENTPOWERSTATE,WORDS), - DEBUG_REC(CCAMODE,WORDS), - DEBUG_REC(SUPPORTEDDATARATES,WORDS), - DEBUG_REC(BUILDSEQ,BYTES), - DEBUG_REC(FWID,XSTRING) -#undef DEBUG_REC -}; - -#define DEBUG_LTV_SIZE 128 - -static int orinoco_debug_dump_recs(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - u8 *val8; - u16 *val16; - int i,j; - u16 length; - int err; - - /* I'm not sure: we might have a lock here, so we'd better go - atomic, just in case. */ - val8 = kmalloc(DEBUG_LTV_SIZE + 2, GFP_ATOMIC); - if (! val8) - return -ENOMEM; - val16 = (u16 *)val8; - - for (i = 0; i < ARRAY_SIZE(record_table); i++) { - u16 rid = record_table[i].rid; - int len; - - memset(val8, 0, DEBUG_LTV_SIZE + 2); - - err = hermes_read_ltv(hw, USER_BAP, rid, DEBUG_LTV_SIZE, - &length, val8); - if (err) { - DEBUG(0, "Error %d reading RID 0x%04x\n", err, rid); - continue; - } - val16 = (u16 *)val8; - if (length == 0) - continue; - - printk(KERN_DEBUG "%-15s (0x%04x): length=%d (%d bytes)\tvalue=", - record_table[i].name, - rid, length, (length-1)*2); - len = min(((int)length-1)*2, DEBUG_LTV_SIZE); - - switch (record_table[i].displaytype) { - case DISPLAY_WORDS: - for (j = 0; j < len / 2; j++) - printk("%04X-", le16_to_cpu(val16[j])); - break; - - case DISPLAY_BYTES: - default: - for (j = 0; j < len; j++) - printk("%02X:", val8[j]); - break; - - case DISPLAY_STRING: - len = min(len, le16_to_cpu(val16[0])+2); - val8[len] = '\0'; - printk("\"%s\"", (char *)&val16[1]); - break; - - case DISPLAY_XSTRING: - printk("'%s'", (char *)val8); - } - - printk("\n"); - } - - kfree(val8); - - return 0; -} /********************************************************************/ /* Debugging */ @@ -4218,7 +4025,6 @@ EXPORT_SYMBOL(free_orinocodev); EXPORT_SYMBOL(__orinoco_up); EXPORT_SYMBOL(__orinoco_down); -EXPORT_SYMBOL(orinoco_stop); EXPORT_SYMBOL(orinoco_reinit_firmware); EXPORT_SYMBOL(orinoco_interrupt); diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index 13e42c2afb2..f749b50d108 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -119,7 +119,6 @@ extern struct net_device *alloc_orinocodev(int sizeof_card, extern void free_orinocodev(struct net_device *dev); extern int __orinoco_up(struct net_device *dev); extern int __orinoco_down(struct net_device *dev); -extern int orinoco_stop(struct net_device *dev); extern int orinoco_reinit_firmware(struct net_device *dev); extern irqreturn_t orinoco_interrupt(int irq, void * dev_id, struct pt_regs *regs); diff --git a/drivers/pci/hotplug.c b/drivers/pci/hotplug.c index 021d0f76bc4..3903f8c559b 100644 --- a/drivers/pci/hotplug.c +++ b/drivers/pci/hotplug.c @@ -52,116 +52,17 @@ int pci_hotplug (struct device *dev, char **envp, int num_envp, if ((buffer_size - length <= 0) || (i >= num_envp)) return -ENOMEM; + envp[i++] = scratch; + length += scnprintf (scratch, buffer_size - length, + "MODALIAS=pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x\n", + pdev->vendor, pdev->device, + pdev->subsystem_vendor, pdev->subsystem_device, + (u8)(pdev->class >> 16), (u8)(pdev->class >> 8), + (u8)(pdev->class)); + if ((buffer_size - length <= 0) || (i >= num_envp)) + return -ENOMEM; + envp[i] = NULL; return 0; } - -static int pci_visit_bus (struct pci_visit * fn, struct pci_bus_wrapped *wrapped_bus, struct pci_dev_wrapped *wrapped_parent) -{ - struct list_head *ln; - struct pci_dev *dev; - struct pci_dev_wrapped wrapped_dev; - int result = 0; - - pr_debug("PCI: Scanning bus %04x:%02x\n", pci_domain_nr(wrapped_bus->bus), - wrapped_bus->bus->number); - - if (fn->pre_visit_pci_bus) { - result = fn->pre_visit_pci_bus(wrapped_bus, wrapped_parent); - if (result) - return result; - } - - ln = wrapped_bus->bus->devices.next; - while (ln != &wrapped_bus->bus->devices) { - dev = pci_dev_b(ln); - ln = ln->next; - - memset(&wrapped_dev, 0, sizeof(struct pci_dev_wrapped)); - wrapped_dev.dev = dev; - - result = pci_visit_dev(fn, &wrapped_dev, wrapped_bus); - if (result) - return result; - } - - if (fn->post_visit_pci_bus) - result = fn->post_visit_pci_bus(wrapped_bus, wrapped_parent); - - return result; -} - -static int pci_visit_bridge (struct pci_visit * fn, - struct pci_dev_wrapped *wrapped_dev, - struct pci_bus_wrapped *wrapped_parent) -{ - struct pci_bus *bus; - struct pci_bus_wrapped wrapped_bus; - int result = 0; - - pr_debug("PCI: Scanning bridge %s\n", pci_name(wrapped_dev->dev)); - - if (fn->visit_pci_dev) { - result = fn->visit_pci_dev(wrapped_dev, wrapped_parent); - if (result) - return result; - } - - bus = wrapped_dev->dev->subordinate; - if (bus) { - memset(&wrapped_bus, 0, sizeof(struct pci_bus_wrapped)); - wrapped_bus.bus = bus; - - result = pci_visit_bus(fn, &wrapped_bus, wrapped_dev); - } - return result; -} - -/** - * pci_visit_dev - scans the pci buses. - * @fn: callback functions that are called while visiting - * @wrapped_dev: the device to scan - * @wrapped_parent: the bus where @wrapped_dev is connected to - * - * Every bus and every function is presented to a custom - * function that can act upon it. - */ -int pci_visit_dev(struct pci_visit *fn, struct pci_dev_wrapped *wrapped_dev, - struct pci_bus_wrapped *wrapped_parent) -{ - struct pci_dev* dev = wrapped_dev ? wrapped_dev->dev : NULL; - int result = 0; - - if (!dev) - return 0; - - if (fn->pre_visit_pci_dev) { - result = fn->pre_visit_pci_dev(wrapped_dev, wrapped_parent); - if (result) - return result; - } - - switch (dev->class >> 8) { - case PCI_CLASS_BRIDGE_PCI: - result = pci_visit_bridge(fn, wrapped_dev, - wrapped_parent); - if (result) - return result; - break; - default: - pr_debug("PCI: Scanning device %s\n", pci_name(dev)); - if (fn->visit_pci_dev) { - result = fn->visit_pci_dev (wrapped_dev, - wrapped_parent); - if (result) - return result; - } - } - - if (fn->post_visit_pci_dev) - result = fn->post_visit_pci_dev(wrapped_dev, wrapped_parent); - - return result; -} -EXPORT_SYMBOL(pci_visit_dev); diff --git a/drivers/pci/hotplug/cpci_hotplug.h b/drivers/pci/hotplug/cpci_hotplug.h index 3ddd75937a4..d9769b30be9 100644 --- a/drivers/pci/hotplug/cpci_hotplug.h +++ b/drivers/pci/hotplug/cpci_hotplug.h @@ -31,7 +31,7 @@ #include <linux/types.h> #include <linux/pci.h> -/* PICMG 2.12 R2.0 HS CSR bits: */ +/* PICMG 2.1 R2.0 HS CSR bits: */ #define HS_CSR_INS 0x0080 #define HS_CSR_EXT 0x0040 #define HS_CSR_PI 0x0030 diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c index ed243605dc7..8132d946c38 100644 --- a/drivers/pci/hotplug/cpci_hotplug_core.c +++ b/drivers/pci/hotplug/cpci_hotplug_core.c @@ -1,7 +1,7 @@ /* * CompactPCI Hot Plug Driver * - * Copyright (C) 2002 SOMA Networks, Inc. + * Copyright (C) 2002,2005 SOMA Networks, Inc. * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2001 IBM Corp. * @@ -33,11 +33,11 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/smp_lock.h> +#include <asm/atomic.h> #include <linux/delay.h> #include "pci_hotplug.h" #include "cpci_hotplug.h" -#define DRIVER_VERSION "0.2" #define DRIVER_AUTHOR "Scott Murray <scottm@somanetworks.com>" #define DRIVER_DESC "CompactPCI Hot Plug Core" @@ -45,18 +45,19 @@ #define dbg(format, arg...) \ do { \ - if(cpci_debug) \ + if (cpci_debug) \ printk (KERN_DEBUG "%s: " format "\n", \ MY_NAME , ## arg); \ - } while(0) + } while (0) #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg) #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg) #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg) /* local variables */ -static spinlock_t list_lock; +static DECLARE_RWSEM(list_rwsem); static LIST_HEAD(slot_list); static int slots; +static atomic_t extracting; int cpci_debug; static struct cpci_hp_controller *controller; static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */ @@ -68,6 +69,8 @@ static int disable_slot(struct hotplug_slot *slot); static int set_attention_status(struct hotplug_slot *slot, u8 value); static int get_power_status(struct hotplug_slot *slot, u8 * value); static int get_attention_status(struct hotplug_slot *slot, u8 * value); +static int get_adapter_status(struct hotplug_slot *slot, u8 * value); +static int get_latch_status(struct hotplug_slot *slot, u8 * value); static struct hotplug_slot_ops cpci_hotplug_slot_ops = { .owner = THIS_MODULE, @@ -76,6 +79,8 @@ static struct hotplug_slot_ops cpci_hotplug_slot_ops = { .set_attention_status = set_attention_status, .get_power_status = get_power_status, .get_attention_status = get_attention_status, + .get_adapter_status = get_adapter_status, + .get_latch_status = get_latch_status, }; static int @@ -106,10 +111,8 @@ enable_slot(struct hotplug_slot *hotplug_slot) dbg("%s - physical_slot = %s", __FUNCTION__, hotplug_slot->name); - if(controller->ops->set_power) { + if (controller->ops->set_power) retval = controller->ops->set_power(slot, 1); - } - return retval; } @@ -121,35 +124,41 @@ disable_slot(struct hotplug_slot *hotplug_slot) dbg("%s - physical_slot = %s", __FUNCTION__, hotplug_slot->name); + down_write(&list_rwsem); + /* Unconfigure device */ dbg("%s - unconfiguring slot %s", __FUNCTION__, slot->hotplug_slot->name); - if((retval = cpci_unconfigure_slot(slot))) { + if ((retval = cpci_unconfigure_slot(slot))) { err("%s - could not unconfigure slot %s", __FUNCTION__, slot->hotplug_slot->name); - return retval; + goto disable_error; } dbg("%s - finished unconfiguring slot %s", __FUNCTION__, slot->hotplug_slot->name); /* Clear EXT (by setting it) */ - if(cpci_clear_ext(slot)) { + if (cpci_clear_ext(slot)) { err("%s - could not clear EXT for slot %s", __FUNCTION__, slot->hotplug_slot->name); retval = -ENODEV; + goto disable_error; } cpci_led_on(slot); - if(controller->ops->set_power) { - retval = controller->ops->set_power(slot, 0); - } + if (controller->ops->set_power) + if ((retval = controller->ops->set_power(slot, 0))) + goto disable_error; - if(update_adapter_status(slot->hotplug_slot, 0)) { + if (update_adapter_status(slot->hotplug_slot, 0)) warn("failure to update adapter file"); - } - - slot->extracting = 0; + if (slot->extracting) { + slot->extracting = 0; + atomic_dec(&extracting); + } +disable_error: + up_write(&list_rwsem); return retval; } @@ -158,9 +167,8 @@ cpci_get_power_status(struct slot *slot) { u8 power = 1; - if(controller->ops->get_power) { + if (controller->ops->get_power) power = controller->ops->get_power(slot); - } return power; } @@ -188,6 +196,20 @@ set_attention_status(struct hotplug_slot *hotplug_slot, u8 status) return cpci_set_attention_status(hotplug_slot->private, status); } +static int +get_adapter_status(struct hotplug_slot *hotplug_slot, u8 * value) +{ + *value = hotplug_slot->info->adapter_status; + return 0; +} + +static int +get_latch_status(struct hotplug_slot *hotplug_slot, u8 * value) +{ + *value = hotplug_slot->info->latch_status; + return 0; +} + static void release_slot(struct hotplug_slot *hotplug_slot) { struct slot *slot = hotplug_slot->private; @@ -216,9 +238,8 @@ cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last) int status = -ENOMEM; int i; - if(!(controller && bus)) { + if (!(controller && bus)) return -ENODEV; - } /* * Create a structure for each slot, and register that slot @@ -273,10 +294,10 @@ cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last) } /* Add slot to our internal list */ - spin_lock(&list_lock); + down_write(&list_rwsem); list_add(&slot->slot_list, &slot_list); slots++; - spin_unlock(&list_lock); + up_write(&list_rwsem); } return 0; error_name: @@ -295,32 +316,30 @@ int cpci_hp_unregister_bus(struct pci_bus *bus) { struct slot *slot; - struct list_head *tmp; - struct list_head *next; - int status; + struct slot *tmp; + int status = 0; - spin_lock(&list_lock); - if(!slots) { - spin_unlock(&list_lock); + down_write(&list_rwsem); + if (!slots) { + up_write(&list_rwsem); return -1; } - list_for_each_safe(tmp, next, &slot_list) { - slot = list_entry(tmp, struct slot, slot_list); - if(slot->bus == bus) { + list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) { + if (slot->bus == bus) { + list_del(&slot->slot_list); + slots--; + dbg("deregistering slot %s", slot->hotplug_slot->name); status = pci_hp_deregister(slot->hotplug_slot); - if(status) { + if (status) { err("pci_hp_deregister failed with error %d", status); - return status; + break; } - - list_del(&slot->slot_list); - slots--; } } - spin_unlock(&list_lock); - return 0; + up_write(&list_rwsem); + return status; } /* This is the interrupt mode interrupt handler */ @@ -330,7 +349,7 @@ cpci_hp_intr(int irq, void *data, struct pt_regs *regs) dbg("entered cpci_hp_intr"); /* Check to see if it was our interrupt */ - if((controller->irq_flags & SA_SHIRQ) && + if ((controller->irq_flags & SA_SHIRQ) && !controller->ops->check_irq(controller->dev_id)) { dbg("exited cpci_hp_intr, not our interrupt"); return IRQ_NONE; @@ -347,46 +366,38 @@ cpci_hp_intr(int irq, void *data, struct pt_regs *regs) } /* - * According to PICMG 2.12 R2.0, section 6.3.2, upon + * According to PICMG 2.1 R2.0, section 6.3.2, upon * initialization, the system driver shall clear the * INS bits of the cold-inserted devices. */ static int -init_slots(void) +init_slots(int clear_ins) { struct slot *slot; - struct list_head *tmp; struct pci_dev* dev; dbg("%s - enter", __FUNCTION__); - spin_lock(&list_lock); - if(!slots) { - spin_unlock(&list_lock); + down_read(&list_rwsem); + if (!slots) { + up_read(&list_rwsem); return -1; } - list_for_each(tmp, &slot_list) { - slot = list_entry(tmp, struct slot, slot_list); + list_for_each_entry(slot, &slot_list, slot_list) { dbg("%s - looking at slot %s", __FUNCTION__, slot->hotplug_slot->name); - if(cpci_check_and_clear_ins(slot)) { + if (clear_ins && cpci_check_and_clear_ins(slot)) dbg("%s - cleared INS for slot %s", __FUNCTION__, slot->hotplug_slot->name); - dev = pci_find_slot(slot->bus->number, PCI_DEVFN(slot->number, 0)); - if(dev) { - if(update_adapter_status(slot->hotplug_slot, 1)) { - warn("failure to update adapter file"); - } - if(update_latch_status(slot->hotplug_slot, 1)) { - warn("failure to update latch file"); - } - slot->dev = dev; - } else { - err("%s - no driver attached to device in slot %s", - __FUNCTION__, slot->hotplug_slot->name); - } + dev = pci_get_slot(slot->bus, PCI_DEVFN(slot->number, 0)); + if (dev) { + if (update_adapter_status(slot->hotplug_slot, 1)) + warn("failure to update adapter file"); + if (update_latch_status(slot->hotplug_slot, 1)) + warn("failure to update latch file"); + slot->dev = dev; } } - spin_unlock(&list_lock); + up_read(&list_rwsem); dbg("%s - exit", __FUNCTION__); return 0; } @@ -395,27 +406,28 @@ static int check_slots(void) { struct slot *slot; - struct list_head *tmp; int extracted; int inserted; + u16 hs_csr; - spin_lock(&list_lock); - if(!slots) { - spin_unlock(&list_lock); + down_read(&list_rwsem); + if (!slots) { + up_read(&list_rwsem); err("no slots registered, shutting down"); return -1; } extracted = inserted = 0; - list_for_each(tmp, &slot_list) { - slot = list_entry(tmp, struct slot, slot_list); + list_for_each_entry(slot, &slot_list, slot_list) { dbg("%s - looking at slot %s", __FUNCTION__, slot->hotplug_slot->name); - if(cpci_check_and_clear_ins(slot)) { - u16 hs_csr; - - /* Some broken hardware (e.g. PLX 9054AB) asserts ENUM# twice... */ - if(slot->dev) { - warn("slot %s already inserted", slot->hotplug_slot->name); + if (cpci_check_and_clear_ins(slot)) { + /* + * Some broken hardware (e.g. PLX 9054AB) asserts + * ENUM# twice... + */ + if (slot->dev) { + warn("slot %s already inserted", + slot->hotplug_slot->name); inserted++; continue; } @@ -432,7 +444,7 @@ check_slots(void) /* Configure device */ dbg("%s - configuring slot %s", __FUNCTION__, slot->hotplug_slot->name); - if(cpci_configure_slot(slot)) { + if (cpci_configure_slot(slot)) { err("%s - could not configure slot %s", __FUNCTION__, slot->hotplug_slot->name); continue; @@ -445,13 +457,11 @@ check_slots(void) dbg("%s - slot %s HS_CSR (2) = %04x", __FUNCTION__, slot->hotplug_slot->name, hs_csr); - if(update_latch_status(slot->hotplug_slot, 1)) { + if (update_latch_status(slot->hotplug_slot, 1)) warn("failure to update latch file"); - } - if(update_adapter_status(slot->hotplug_slot, 1)) { + if (update_adapter_status(slot->hotplug_slot, 1)) warn("failure to update adapter file"); - } cpci_led_off(slot); @@ -461,9 +471,7 @@ check_slots(void) __FUNCTION__, slot->hotplug_slot->name, hs_csr); inserted++; - } else if(cpci_check_ext(slot)) { - u16 hs_csr; - + } else if (cpci_check_ext(slot)) { /* Process extraction request */ dbg("%s - slot %s extracted", __FUNCTION__, slot->hotplug_slot->name); @@ -473,23 +481,40 @@ check_slots(void) dbg("%s - slot %s HS_CSR = %04x", __FUNCTION__, slot->hotplug_slot->name, hs_csr); - if(!slot->extracting) { - if(update_latch_status(slot->hotplug_slot, 0)) { + if (!slot->extracting) { + if (update_latch_status(slot->hotplug_slot, 0)) { warn("failure to update latch file"); } slot->extracting = 1; + atomic_inc(&extracting); } extracted++; + } else if (slot->extracting) { + hs_csr = cpci_get_hs_csr(slot); + if (hs_csr == 0xffff) { + /* + * Hmmm, we're likely hosed at this point, should we + * bother trying to tell the driver or not? + */ + err("card in slot %s was improperly removed", + slot->hotplug_slot->name); + if (update_adapter_status(slot->hotplug_slot, 0)) + warn("failure to update adapter file"); + slot->extracting = 0; + atomic_dec(&extracting); + } } } - spin_unlock(&list_lock); - if(inserted || extracted) { + up_read(&list_rwsem); + dbg("inserted=%d, extracted=%d, extracting=%d", + inserted, extracted, atomic_read(&extracting)); + if (inserted || extracted) return extracted; - } - else { + else if (!atomic_read(&extracting)) { err("cannot find ENUM# source, shutting down"); return -1; } + return 0; } /* This is the interrupt mode worker thread body */ @@ -497,54 +522,37 @@ static int event_thread(void *data) { int rc; - struct slot *slot; - struct list_head *tmp; lock_kernel(); daemonize("cpci_hp_eventd"); unlock_kernel(); dbg("%s - event thread started", __FUNCTION__); - while(1) { + while (1) { dbg("event thread sleeping"); down_interruptible(&event_semaphore); dbg("event thread woken, thread_finished = %d", thread_finished); - if(thread_finished || signal_pending(current)) + if (thread_finished || signal_pending(current)) break; - while(controller->ops->query_enum()) { + do { rc = check_slots(); - if (rc > 0) + if (rc > 0) { /* Give userspace a chance to handle extraction */ msleep(500); - else if (rc < 0) { + } else if (rc < 0) { dbg("%s - error checking slots", __FUNCTION__); thread_finished = 1; break; } - } - /* Check for someone yanking out a board */ - list_for_each(tmp, &slot_list) { - slot = list_entry(tmp, struct slot, slot_list); - if(slot->extracting) { - /* - * Hmmm, we're likely hosed at this point, should we - * bother trying to tell the driver or not? - */ - err("card in slot %s was improperly removed", - slot->hotplug_slot->name); - if(update_adapter_status(slot->hotplug_slot, 0)) { - warn("failure to update adapter file"); - } - slot->extracting = 0; - } - } + } while (atomic_read(&extracting) && !thread_finished); + if (thread_finished) + break; /* Re-enable ENUM# interrupt */ dbg("%s - re-enabling irq", __FUNCTION__); controller->ops->enable_irq(); } - dbg("%s - event thread signals exit", __FUNCTION__); up(&thread_exit); return 0; @@ -555,45 +563,27 @@ static int poll_thread(void *data) { int rc; - struct slot *slot; - struct list_head *tmp; lock_kernel(); daemonize("cpci_hp_polld"); unlock_kernel(); - while(1) { - if(thread_finished || signal_pending(current)) + while (1) { + if (thread_finished || signal_pending(current)) break; - - while(controller->ops->query_enum()) { - rc = check_slots(); - if(rc > 0) - /* Give userspace a chance to handle extraction */ - msleep(500); - else if (rc < 0) { - dbg("%s - error checking slots", __FUNCTION__); - thread_finished = 1; - break; - } - } - /* Check for someone yanking out a board */ - list_for_each(tmp, &slot_list) { - slot = list_entry(tmp, struct slot, slot_list); - if(slot->extracting) { - /* - * Hmmm, we're likely hosed at this point, should we - * bother trying to tell the driver or not? - */ - err("card in slot %s was improperly removed", - slot->hotplug_slot->name); - if(update_adapter_status(slot->hotplug_slot, 0)) { - warn("failure to update adapter file"); + if (controller->ops->query_enum()) { + do { + rc = check_slots(); + if (rc > 0) { + /* Give userspace a chance to handle extraction */ + msleep(500); + } else if (rc < 0) { + dbg("%s - error checking slots", __FUNCTION__); + thread_finished = 1; + break; } - slot->extracting = 0; - } + } while (atomic_read(&extracting) && !thread_finished); } - msleep(100); } dbg("poll thread signals exit"); @@ -611,12 +601,11 @@ cpci_start_thread(void) init_MUTEX_LOCKED(&thread_exit); thread_finished = 0; - if(controller->irq) { + if (controller->irq) pid = kernel_thread(event_thread, NULL, 0); - } else { + else pid = kernel_thread(poll_thread, NULL, 0); - } - if(pid < 0) { + if (pid < 0) { err("Can't start up our thread"); return -1; } @@ -629,9 +618,8 @@ cpci_stop_thread(void) { thread_finished = 1; dbg("thread finish command given"); - if(controller->irq) { + if (controller->irq) up(&event_semaphore); - } dbg("wait for thread to exit"); down(&thread_exit); } @@ -641,42 +629,67 @@ cpci_hp_register_controller(struct cpci_hp_controller *new_controller) { int status = 0; - if(!controller) { - controller = new_controller; - if(controller->irq) { - if(request_irq(controller->irq, - cpci_hp_intr, - controller->irq_flags, - MY_NAME, controller->dev_id)) { - err("Can't get irq %d for the hotplug cPCI controller", controller->irq); - status = -ENODEV; - } - dbg("%s - acquired controller irq %d", __FUNCTION__, - controller->irq); + if (controller) + return -1; + if (!(new_controller && new_controller->ops)) + return -EINVAL; + if (new_controller->irq) { + if (!(new_controller->ops->enable_irq && + new_controller->ops->disable_irq)) + status = -EINVAL; + if (request_irq(new_controller->irq, + cpci_hp_intr, + new_controller->irq_flags, + MY_NAME, + new_controller->dev_id)) { + err("Can't get irq %d for the hotplug cPCI controller", + new_controller->irq); + status = -ENODEV; } - } else { - err("cPCI hotplug controller already registered"); - status = -1; + dbg("%s - acquired controller irq %d", + __FUNCTION__, new_controller->irq); } + if (!status) + controller = new_controller; return status; } +static void +cleanup_slots(void) +{ + struct slot *slot; + struct slot *tmp; + + /* + * Unregister all of our slots with the pci_hotplug subsystem, + * and free up all memory that we had allocated. + */ + down_write(&list_rwsem); + if (!slots) + goto cleanup_null; + list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) { + list_del(&slot->slot_list); + pci_hp_deregister(slot->hotplug_slot); + } +cleanup_null: + up_write(&list_rwsem); + return; +} + int cpci_hp_unregister_controller(struct cpci_hp_controller *old_controller) { int status = 0; - if(controller) { - if(!thread_finished) { + if (controller) { + if (!thread_finished) cpci_stop_thread(); - } - if(controller->irq) { + if (controller->irq) free_irq(controller->irq, controller->dev_id); - } controller = NULL; - } else { + cleanup_slots(); + } else status = -ENODEV; - } return status; } @@ -687,32 +700,28 @@ cpci_hp_start(void) int status; dbg("%s - enter", __FUNCTION__); - if(!controller) { + if (!controller) return -ENODEV; - } - spin_lock(&list_lock); - if(!slots) { - spin_unlock(&list_lock); + down_read(&list_rwsem); + if (list_empty(&slot_list)) { + up_read(&list_rwsem); return -ENODEV; } - spin_unlock(&list_lock); + up_read(&list_rwsem); - if(first) { - status = init_slots(); - if(status) { - return status; - } + status = init_slots(first); + if (first) first = 0; - } + if (status) + return status; status = cpci_start_thread(); - if(status) { + if (status) return status; - } dbg("%s - thread started", __FUNCTION__); - if(controller->irq) { + if (controller->irq) { /* Start enum interrupt processing */ dbg("%s - enabling irq", __FUNCTION__); controller->ops->enable_irq(); @@ -724,11 +733,9 @@ cpci_hp_start(void) int cpci_hp_stop(void) { - if(!controller) { + if (!controller) return -ENODEV; - } - - if(controller->irq) { + if (controller->irq) { /* Stop enum interrupt processing */ dbg("%s - disabling irq", __FUNCTION__); controller->ops->disable_irq(); @@ -737,41 +744,10 @@ cpci_hp_stop(void) return 0; } -static void __exit -cleanup_slots(void) -{ - struct list_head *tmp; - struct slot *slot; - - /* - * Unregister all of our slots with the pci_hotplug subsystem, - * and free up all memory that we had allocated. - */ - spin_lock(&list_lock); - if(!slots) { - goto null_cleanup; - } - list_for_each(tmp, &slot_list) { - slot = list_entry(tmp, struct slot, slot_list); - list_del(&slot->slot_list); - pci_hp_deregister(slot->hotplug_slot); - kfree(slot->hotplug_slot->info); - kfree(slot->hotplug_slot->name); - kfree(slot->hotplug_slot); - kfree(slot); - } - null_cleanup: - spin_unlock(&list_lock); - return; -} - int __init cpci_hotplug_init(int debug) { - spin_lock_init(&list_lock); cpci_debug = debug; - - info(DRIVER_DESC " version: " DRIVER_VERSION); return 0; } @@ -781,7 +757,8 @@ cpci_hotplug_exit(void) /* * Clean everything up. */ - cleanup_slots(); + cpci_hp_stop(); + cpci_hp_unregister_controller(controller); } EXPORT_SYMBOL_GPL(cpci_hp_register_controller); diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c index 2e969616f29..c878028ad21 100644 --- a/drivers/pci/hotplug/cpci_hotplug_pci.c +++ b/drivers/pci/hotplug/cpci_hotplug_pci.c @@ -1,7 +1,7 @@ /* * CompactPCI Hot Plug Driver PCI functions * - * Copyright (C) 2002 by SOMA Networks, Inc. + * Copyright (C) 2002,2005 by SOMA Networks, Inc. * * All rights reserved. * @@ -32,20 +32,16 @@ #include "pci_hotplug.h" #include "cpci_hotplug.h" -#if !defined(MODULE) #define MY_NAME "cpci_hotplug" -#else -#define MY_NAME THIS_MODULE->name -#endif extern int cpci_debug; #define dbg(format, arg...) \ do { \ - if(cpci_debug) \ + if (cpci_debug) \ printk (KERN_DEBUG "%s: " format "\n", \ MY_NAME , ## arg); \ - } while(0) + } while (0) #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg) #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg) #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg) @@ -61,16 +57,15 @@ u8 cpci_get_attention_status(struct slot* slot) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return 0; - } - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return 0; - } + return hs_csr & 0x0008 ? 1 : 0; } @@ -82,27 +77,22 @@ int cpci_set_attention_status(struct slot* slot, int status) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return 0; - } - - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return 0; - } - if(status) { + if (status) hs_csr |= HS_CSR_LOO; - } else { + else hs_csr &= ~HS_CSR_LOO; - } - if(pci_bus_write_config_word(slot->bus, + if (pci_bus_write_config_word(slot->bus, slot->devfn, hs_cap + 2, - hs_csr)) { + hs_csr)) return 0; - } return 1; } @@ -114,51 +104,16 @@ u16 cpci_get_hs_csr(struct slot* slot) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return 0xFFFF; - } - - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return 0xFFFF; - } return hs_csr; } -#if 0 -u16 cpci_set_hs_csr(struct slot* slot, u16 hs_csr) -{ - int hs_cap; - u16 new_hs_csr; - - hs_cap = pci_bus_find_capability(slot->bus, - slot->devfn, - PCI_CAP_ID_CHSWP); - if(!hs_cap) { - return 0xFFFF; - } - - /* Write out the new value */ - if(pci_bus_write_config_word(slot->bus, - slot->devfn, - hs_cap + 2, - hs_csr)) { - return 0xFFFF; - } - - /* Read back what we just wrote out */ - if(pci_bus_read_config_word(slot->bus, - slot->devfn, - hs_cap + 2, - &new_hs_csr)) { - return 0xFFFF; - } - return new_hs_csr; -} -#endif - int cpci_check_and_clear_ins(struct slot* slot) { int hs_cap; @@ -168,24 +123,22 @@ int cpci_check_and_clear_ins(struct slot* slot) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return 0; - } - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return 0; - } - if(hs_csr & HS_CSR_INS) { + if (hs_csr & HS_CSR_INS) { /* Clear INS (by setting it) */ - if(pci_bus_write_config_word(slot->bus, + if (pci_bus_write_config_word(slot->bus, slot->devfn, hs_cap + 2, - hs_csr)) { + hs_csr)) ins = 0; - } - ins = 1; + else + ins = 1; } return ins; } @@ -199,18 +152,15 @@ int cpci_check_ext(struct slot* slot) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return 0; - } - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return 0; - } - if(hs_csr & HS_CSR_EXT) { + if (hs_csr & HS_CSR_EXT) ext = 1; - } return ext; } @@ -222,23 +172,20 @@ int cpci_clear_ext(struct slot* slot) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return -ENODEV; - } - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return -ENODEV; - } - if(hs_csr & HS_CSR_EXT) { + if (hs_csr & HS_CSR_EXT) { /* Clear EXT (by setting it) */ - if(pci_bus_write_config_word(slot->bus, + if (pci_bus_write_config_word(slot->bus, slot->devfn, hs_cap + 2, - hs_csr)) { + hs_csr)) return -ENODEV; - } } return 0; } @@ -251,19 +198,16 @@ int cpci_led_on(struct slot* slot) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return -ENODEV; - } - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return -ENODEV; - } - if((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) { - /* Set LOO */ + if ((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) { hs_csr |= HS_CSR_LOO; - if(pci_bus_write_config_word(slot->bus, + if (pci_bus_write_config_word(slot->bus, slot->devfn, hs_cap + 2, hs_csr)) { @@ -283,19 +227,16 @@ int cpci_led_off(struct slot* slot) hs_cap = pci_bus_find_capability(slot->bus, slot->devfn, PCI_CAP_ID_CHSWP); - if(!hs_cap) { + if (!hs_cap) return -ENODEV; - } - if(pci_bus_read_config_word(slot->bus, + if (pci_bus_read_config_word(slot->bus, slot->devfn, hs_cap + 2, - &hs_csr)) { + &hs_csr)) return -ENODEV; - } - if(hs_csr & HS_CSR_LOO) { - /* Clear LOO */ + if (hs_csr & HS_CSR_LOO) { hs_csr &= ~HS_CSR_LOO; - if(pci_bus_write_config_word(slot->bus, + if (pci_bus_write_config_word(slot->bus, slot->devfn, hs_cap + 2, hs_csr)) { @@ -312,268 +253,21 @@ int cpci_led_off(struct slot* slot) * Device configuration functions */ -static int cpci_configure_dev(struct pci_bus *bus, struct pci_dev *dev) -{ - u8 irq_pin; - int r; - - dbg("%s - enter", __FUNCTION__); - - /* NOTE: device already setup from prior scan */ - - /* FIXME: How would we know if we need to enable the expansion ROM? */ - pci_write_config_word(dev, PCI_ROM_ADDRESS, 0x00L); - - /* Assign resources */ - dbg("assigning resources for %02x:%02x.%x", - dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); - for (r = 0; r < 6; r++) { - struct resource *res = dev->resource + r; - if(res->flags) - pci_assign_resource(dev, r); - } - dbg("finished assigning resources for %02x:%02x.%x", - dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); - - /* Does this function have an interrupt at all? */ - dbg("checking for function interrupt"); - pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq_pin); - if(irq_pin) { - dbg("function uses interrupt pin %d", irq_pin); - } - - /* - * Need to explicitly set irq field to 0 so that it'll get assigned - * by the pcibios platform dependent code called by pci_enable_device. - */ - dev->irq = 0; - - dbg("enabling device"); - pci_enable_device(dev); /* XXX check return */ - dbg("now dev->irq = %d", dev->irq); - if(irq_pin && dev->irq) { - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } - - /* Can't use pci_insert_device at the moment, do it manually for now */ - pci_proc_attach_device(dev); - dbg("notifying drivers"); - //pci_announce_device_to_drivers(dev); - dbg("%s - exit", __FUNCTION__); - return 0; -} - -static int cpci_configure_bridge(struct pci_bus* bus, struct pci_dev* dev) -{ - int rc; - struct pci_bus* child; - struct resource* r; - u8 max, n; - u16 command; - - dbg("%s - enter", __FUNCTION__); - - /* Do basic bridge initialization */ - rc = pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40); - if(rc) { - printk(KERN_ERR "%s - write of PCI_LATENCY_TIMER failed\n", __FUNCTION__); - } - rc = pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); - if(rc) { - printk(KERN_ERR "%s - write of PCI_SEC_LATENCY_TIMER failed\n", __FUNCTION__); - } - rc = pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_BYTES / 4); - if(rc) { - printk(KERN_ERR "%s - write of PCI_CACHE_LINE_SIZE failed\n", __FUNCTION__); - } - - /* - * Set parent bridge's subordinate field so that configuration space - * access will work in pci_scan_bridge and friends. - */ - max = pci_max_busnr(); - bus->subordinate = max + 1; - pci_write_config_byte(bus->self, PCI_SUBORDINATE_BUS, max + 1); - - /* Scan behind bridge */ - n = pci_scan_bridge(bus, dev, max, 2); - child = pci_find_bus(0, max + 1); - if (!child) - return -ENODEV; - pci_proc_attach_bus(child); - - /* - * Update parent bridge's subordinate field if there were more bridges - * behind the bridge that was scanned. - */ - if(n > max) { - bus->subordinate = n; - pci_write_config_byte(bus->self, PCI_SUBORDINATE_BUS, n); - } - - /* - * Update the bridge resources of the bridge to accommodate devices - * behind it. - */ - pci_bus_size_bridges(child); - pci_bus_assign_resources(child); - - /* Enable resource mapping via command register */ - command = PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR; - r = child->resource[0]; - if(r && r->start) { - command |= PCI_COMMAND_IO; - } - r = child->resource[1]; - if(r && r->start) { - command |= PCI_COMMAND_MEMORY; - } - r = child->resource[2]; - if(r && r->start) { - command |= PCI_COMMAND_MEMORY; - } - rc = pci_write_config_word(dev, PCI_COMMAND, command); - if(rc) { - err("Error setting command register"); - return rc; - } - - /* Set bridge control register */ - command = PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR | PCI_BRIDGE_CTL_NO_ISA; - rc = pci_write_config_word(dev, PCI_BRIDGE_CONTROL, command); - if(rc) { - err("Error setting bridge control register"); - return rc; - } - dbg("%s - exit", __FUNCTION__); - return 0; -} - -static int configure_visit_pci_dev(struct pci_dev_wrapped *wrapped_dev, - struct pci_bus_wrapped *wrapped_bus) -{ - int rc; - struct pci_dev *dev = wrapped_dev->dev; - struct pci_bus *bus = wrapped_bus->bus; - struct slot* slot; - - dbg("%s - enter", __FUNCTION__); - - /* - * We need to fix up the hotplug representation with the Linux - * representation. - */ - if(wrapped_dev->data) { - slot = (struct slot*) wrapped_dev->data; - slot->dev = dev; - } - - /* If it's a bridge, scan behind it for devices */ - if(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { - rc = cpci_configure_bridge(bus, dev); - if(rc) - return rc; - } - - /* Actually configure device */ - if(dev) { - rc = cpci_configure_dev(bus, dev); - if(rc) - return rc; - } - dbg("%s - exit", __FUNCTION__); - return 0; -} - -static int unconfigure_visit_pci_dev_phase2(struct pci_dev_wrapped *wrapped_dev, - struct pci_bus_wrapped *wrapped_bus) -{ - struct pci_dev *dev = wrapped_dev->dev; - struct slot* slot; - - dbg("%s - enter", __FUNCTION__); - if(!dev) - return -ENODEV; - - /* Remove the Linux representation */ - if(pci_remove_device_safe(dev)) { - err("Could not remove device\n"); - return -1; - } - - /* - * Now remove the hotplug representation. - */ - if(wrapped_dev->data) { - slot = (struct slot*) wrapped_dev->data; - slot->dev = NULL; - } else { - dbg("No hotplug representation for %02x:%02x.%x", - dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); - } - dbg("%s - exit", __FUNCTION__); - return 0; -} - -static int unconfigure_visit_pci_bus_phase2(struct pci_bus_wrapped *wrapped_bus, - struct pci_dev_wrapped *wrapped_dev) -{ - struct pci_bus *bus = wrapped_bus->bus; - struct pci_bus *parent = bus->self->bus; - - dbg("%s - enter", __FUNCTION__); - - /* The cleanup code for proc entries regarding buses should be in the kernel... */ - if(bus->procdir) - dbg("detach_pci_bus %s", bus->procdir->name); - pci_proc_detach_bus(bus); - - /* The cleanup code should live in the kernel... */ - bus->self->subordinate = NULL; - - /* unlink from parent bus */ - list_del(&bus->node); - - /* Now, remove */ - if(bus) - kfree(bus); - - /* Update parent's subordinate field */ - if(parent) { - u8 n = pci_bus_max_busnr(parent); - if(n < parent->subordinate) { - parent->subordinate = n; - pci_write_config_byte(parent->self, PCI_SUBORDINATE_BUS, n); - } - } - dbg("%s - exit", __FUNCTION__); - return 0; -} - -static struct pci_visit configure_functions = { - .visit_pci_dev = configure_visit_pci_dev, -}; - -static struct pci_visit unconfigure_functions_phase2 = { - .post_visit_pci_bus = unconfigure_visit_pci_bus_phase2, - .post_visit_pci_dev = unconfigure_visit_pci_dev_phase2 -}; - - int cpci_configure_slot(struct slot* slot) { - int rc = 0; + unsigned char busnr; + struct pci_bus *child; dbg("%s - enter", __FUNCTION__); - if(slot->dev == NULL) { + if (slot->dev == NULL) { dbg("pci_dev null, finding %02x:%02x:%x", slot->bus->number, PCI_SLOT(slot->devfn), PCI_FUNC(slot->devfn)); - slot->dev = pci_find_slot(slot->bus->number, slot->devfn); + slot->dev = pci_get_slot(slot->bus, slot->devfn); } /* Still NULL? Well then scan for it! */ - if(slot->dev == NULL) { + if (slot->dev == NULL) { int n; dbg("pci_dev still null"); @@ -583,79 +277,47 @@ int cpci_configure_slot(struct slot* slot) */ n = pci_scan_slot(slot->bus, slot->devfn); dbg("%s: pci_scan_slot returned %d", __FUNCTION__, n); - if(n > 0) + if (n > 0) pci_bus_add_devices(slot->bus); - slot->dev = pci_find_slot(slot->bus->number, slot->devfn); - if(slot->dev == NULL) { + slot->dev = pci_get_slot(slot->bus, slot->devfn); + if (slot->dev == NULL) { err("Could not find PCI device for slot %02x", slot->number); - return 0; + return 1; } } - dbg("slot->dev = %p", slot->dev); - if(slot->dev) { - struct pci_dev *dev; - struct pci_dev_wrapped wrapped_dev; - struct pci_bus_wrapped wrapped_bus; - int i; - - memset(&wrapped_dev, 0, sizeof (struct pci_dev_wrapped)); - memset(&wrapped_bus, 0, sizeof (struct pci_bus_wrapped)); - - for (i = 0; i < 8; i++) { - dev = pci_find_slot(slot->bus->number, - PCI_DEVFN(PCI_SLOT(slot->dev->devfn), i)); - if(!dev) - continue; - wrapped_dev.dev = dev; - wrapped_bus.bus = slot->dev->bus; - if(i) - wrapped_dev.data = NULL; - else - wrapped_dev.data = (void*) slot; - rc = pci_visit_dev(&configure_functions, &wrapped_dev, &wrapped_bus); - } + + if (slot->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { + pci_read_config_byte(slot->dev, PCI_SECONDARY_BUS, &busnr); + child = pci_add_new_bus(slot->dev->bus, slot->dev, busnr); + pci_do_scan_bus(child); + pci_bus_size_bridges(child); } - dbg("%s - exit, rc = %d", __FUNCTION__, rc); - return rc; + pci_bus_assign_resources(slot->dev->bus); + + dbg("%s - exit", __FUNCTION__); + return 0; } int cpci_unconfigure_slot(struct slot* slot) { - int rc = 0; int i; - struct pci_dev_wrapped wrapped_dev; - struct pci_bus_wrapped wrapped_bus; struct pci_dev *dev; dbg("%s - enter", __FUNCTION__); - - if(!slot->dev) { + if (!slot->dev) { err("No device for slot %02x\n", slot->number); return -ENODEV; } - memset(&wrapped_dev, 0, sizeof (struct pci_dev_wrapped)); - memset(&wrapped_bus, 0, sizeof (struct pci_bus_wrapped)); - for (i = 0; i < 8; i++) { - dev = pci_find_slot(slot->bus->number, + dev = pci_get_slot(slot->bus, PCI_DEVFN(PCI_SLOT(slot->devfn), i)); - if(dev) { - wrapped_dev.dev = dev; - wrapped_bus.bus = dev->bus; - if(i) - wrapped_dev.data = NULL; - else - wrapped_dev.data = (void*) slot; - dbg("%s - unconfigure phase 2", __FUNCTION__); - rc = pci_visit_dev(&unconfigure_functions_phase2, - &wrapped_dev, - &wrapped_bus); - if(rc) - break; + if (dev) { + pci_remove_bus_device(dev); + slot->dev = NULL; } } - dbg("%s - exit, rc = %d", __FUNCTION__, rc); - return rc; + dbg("%s - exit", __FUNCTION__); + return 0; } diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index f313121d514..46b294a1241 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -130,6 +130,7 @@ struct controller { u8 slot_bus; /* Bus where the slots handled by this controller sit */ u8 ctrlcap; u16 vendor_id; + u8 cap_base; }; struct irq_mapping { diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index ed1fd8d6178..df4915dbc32 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -607,7 +607,7 @@ static int pciehp_resume (struct pcie_device *dev) static struct pcie_port_service_id port_pci_ids[] = { { .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, - .port_type = PCIE_RC_PORT, + .port_type = PCIE_ANY_PORT, .service_type = PCIE_PORT_SERVICE_HP, .driver_data = 0, }, { /* end: all zeroes */ } diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 9e70c4681f7..1cda30bd6e4 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -109,20 +109,20 @@ enum ctrl_offsets { }; static int pcie_cap_base = 0; /* Base of the PCI Express capability item structure */ -#define PCIE_CAP_ID ( pcie_cap_base + PCIECAPID ) -#define NXT_CAP_PTR ( pcie_cap_base + NXTCAPPTR ) -#define CAP_REG ( pcie_cap_base + CAPREG ) -#define DEV_CAP ( pcie_cap_base + DEVCAP ) -#define DEV_CTRL ( pcie_cap_base + DEVCTRL ) -#define DEV_STATUS ( pcie_cap_base + DEVSTATUS ) -#define LNK_CAP ( pcie_cap_base + LNKCAP ) -#define LNK_CTRL ( pcie_cap_base + LNKCTRL ) -#define LNK_STATUS ( pcie_cap_base + LNKSTATUS ) -#define SLOT_CAP ( pcie_cap_base + SLOTCAP ) -#define SLOT_CTRL ( pcie_cap_base + SLOTCTRL ) -#define SLOT_STATUS ( pcie_cap_base + SLOTSTATUS ) -#define ROOT_CTRL ( pcie_cap_base + ROOTCTRL ) -#define ROOT_STATUS ( pcie_cap_base + ROOTSTATUS ) +#define PCIE_CAP_ID(cb) ( cb + PCIECAPID ) +#define NXT_CAP_PTR(cb) ( cb + NXTCAPPTR ) +#define CAP_REG(cb) ( cb + CAPREG ) +#define DEV_CAP(cb) ( cb + DEVCAP ) +#define DEV_CTRL(cb) ( cb + DEVCTRL ) +#define DEV_STATUS(cb) ( cb + DEVSTATUS ) +#define LNK_CAP(cb) ( cb + LNKCAP ) +#define LNK_CTRL(cb) ( cb + LNKCTRL ) +#define LNK_STATUS(cb) ( cb + LNKSTATUS ) +#define SLOT_CAP(cb) ( cb + SLOTCAP ) +#define SLOT_CTRL(cb) ( cb + SLOTCTRL ) +#define SLOT_STATUS(cb) ( cb + SLOTSTATUS ) +#define ROOT_CTRL(cb) ( cb + ROOTCTRL ) +#define ROOT_STATUS(cb) ( cb + ROOTSTATUS ) #define hp_register_read_word(pdev, reg , value) \ pci_read_config_word(pdev, reg, &value) @@ -303,7 +303,7 @@ static int pcie_write_cmd(struct slot *slot, u16 cmd) return -1; } - retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status); + retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status); if (retval) { err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__); return retval; @@ -317,7 +317,7 @@ static int pcie_write_cmd(struct slot *slot, u16 cmd) } dbg("%s: Before hp_register_write_word SLOT_CTRL %x\n", __FUNCTION__, cmd); - retval = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL, cmd | CMD_CMPL_INTR_ENABLE); + retval = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), cmd | CMD_CMPL_INTR_ENABLE); if (retval) { err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__); return retval; @@ -342,7 +342,7 @@ static int hpc_check_lnk_status(struct controller *ctrl) return -1; } - retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS, lnk_status); + retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS(ctrl->cap_base), lnk_status); if (retval) { err("%s : hp_register_read_word LNK_STATUS failed\n", __FUNCTION__); @@ -376,14 +376,14 @@ static int hpc_get_attention_status(struct slot *slot, u8 *status) return -1; } - retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl); + retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl); if (retval) { err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__); return retval; } - dbg("%s: SLOT_CTRL %x, value read %x\n", __FUNCTION__,SLOT_CTRL, slot_ctrl); + dbg("%s: SLOT_CTRL %x, value read %x\n", __FUNCTION__,SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl); atten_led_state = (slot_ctrl & ATTN_LED_CTRL) >> 6; @@ -423,13 +423,13 @@ static int hpc_get_power_status(struct slot * slot, u8 *status) return -1; } - retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl); + retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl); if (retval) { err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__); return retval; } - dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL, slot_ctrl); + dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl); pwr_state = (slot_ctrl & PWR_CTRL) >> 10; @@ -463,7 +463,7 @@ static int hpc_get_latch_status(struct slot *slot, u8 *status) return -1; } - retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status); + retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status); if (retval) { err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__); @@ -490,7 +490,7 @@ static int hpc_get_adapter_status(struct slot *slot, u8 *status) return -1; } - retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status); + retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status); if (retval) { err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__); @@ -518,7 +518,7 @@ static int hpc_query_power_fault(struct slot * slot) return -1; } - retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status); + retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status); if (retval) { err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__); @@ -549,7 +549,7 @@ static int hpc_set_attention_status(struct slot *slot, u8 value) err("%s: Invalid HPC slot number!\n", __FUNCTION__); return -1; } - rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl); + rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl); if (rc) { err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__); @@ -574,7 +574,7 @@ static int hpc_set_attention_status(struct slot *slot, u8 value) slot_cmd = slot_cmd | HP_INTR_ENABLE; pcie_write_cmd(slot, slot_cmd); - dbg("%s: SLOT_CTRL %x write cmd %x\n", __FUNCTION__, SLOT_CTRL, slot_cmd); + dbg("%s: SLOT_CTRL %x write cmd %x\n", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd); return rc; } @@ -598,7 +598,7 @@ static void hpc_set_green_led_on(struct slot *slot) return ; } - rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl); + rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl); if (rc) { err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__); @@ -611,7 +611,7 @@ static void hpc_set_green_led_on(struct slot *slot) pcie_write_cmd(slot, slot_cmd); - dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL, slot_cmd); + dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd); return; } @@ -633,7 +633,7 @@ static void hpc_set_green_led_off(struct slot *slot) return ; } - rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl); + rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl); if (rc) { err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__); @@ -646,7 +646,7 @@ static void hpc_set_green_led_off(struct slot *slot) if (!pciehp_poll_mode) slot_cmd = slot_cmd | HP_INTR_ENABLE; pcie_write_cmd(slot, slot_cmd); - dbg("%s: SLOT_CTRL %x write cmd %x\n", __FUNCTION__, SLOT_CTRL, slot_cmd); + dbg("%s: SLOT_CTRL %x write cmd %x\n", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd); return; } @@ -669,7 +669,7 @@ static void hpc_set_green_led_blink(struct slot *slot) return ; } - rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl); + rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl); if (rc) { err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__); @@ -683,7 +683,7 @@ static void hpc_set_green_led_blink(struct slot *slot) slot_cmd = slot_cmd | HP_INTR_ENABLE; pcie_write_cmd(slot, slot_cmd); - dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL, slot_cmd); + dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd); return; } @@ -707,7 +707,7 @@ int pcie_get_ctlr_slot_config(struct controller *ctrl, *first_device_num = 0; *num_ctlr_slots = 1; - rc = hp_register_read_dword(php_ctlr->pci_dev, SLOT_CAP, slot_cap); + rc = hp_register_read_dword(php_ctlr->pci_dev, SLOT_CAP(ctrl->cap_base), slot_cap); if (rc) { err("%s : hp_register_read_dword SLOT_CAP failed\n", __FUNCTION__); @@ -793,13 +793,13 @@ static int hpc_power_on_slot(struct slot * slot) return -1; } - retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl); + retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl); if (retval) { err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__); return retval; } - dbg("%s: SLOT_CTRL %x, value read %xn", __FUNCTION__, SLOT_CTRL, + dbg("%s: SLOT_CTRL %x, value read %xn", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl); slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_ON; @@ -813,7 +813,7 @@ static int hpc_power_on_slot(struct slot * slot) err("%s: Write %x command failed!\n", __FUNCTION__, slot_cmd); return -1; } - dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL, slot_cmd); + dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd); DBG_LEAVE_ROUTINE @@ -842,13 +842,13 @@ static int hpc_power_off_slot(struct slot * slot) err("%s: Invalid HPC slot number!\n", __FUNCTION__); return -1; } - retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl); + retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl); if (retval) { err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__); return retval; } - dbg("%s: SLOT_CTRL %x, value read %x\n", __FUNCTION__, SLOT_CTRL, + dbg("%s: SLOT_CTRL %x, value read %x\n", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl); slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_OFF; @@ -862,7 +862,7 @@ static int hpc_power_off_slot(struct slot * slot) err("%s: Write command failed!\n", __FUNCTION__); return -1; } - dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL, slot_cmd); + dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd); DBG_LEAVE_ROUTINE @@ -900,7 +900,7 @@ static irqreturn_t pcie_isr(int IRQ, void *dev_id, struct pt_regs *regs) return IRQ_NONE; } - rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status); + rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status); if (rc) { err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__); return IRQ_NONE; @@ -918,7 +918,7 @@ static irqreturn_t pcie_isr(int IRQ, void *dev_id, struct pt_regs *regs) dbg("%s: intr_loc %x\n", __FUNCTION__, intr_loc); /* Mask Hot-plug Interrupt Enable */ if (!pciehp_poll_mode) { - rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, temp_word); + rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word); if (rc) { err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__); return IRQ_NONE; @@ -928,14 +928,14 @@ static irqreturn_t pcie_isr(int IRQ, void *dev_id, struct pt_regs *regs) dbg("%s: hp_register_read_word SLOT_CTRL with value %x\n", __FUNCTION__, temp_word); temp_word = (temp_word & ~HP_INTR_ENABLE & ~CMD_CMPL_INTR_ENABLE) | 0x00; - rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL, temp_word); + rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word); if (rc) { err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__); return IRQ_NONE; } dbg("%s: hp_register_write_word SLOT_CTRL with value %x\n", __FUNCTION__, temp_word); - rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status); + rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status); if (rc) { err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__); return IRQ_NONE; @@ -944,7 +944,7 @@ static irqreturn_t pcie_isr(int IRQ, void *dev_id, struct pt_regs *regs) /* Clear command complete interrupt caused by this write */ temp_word = 0x1f; - rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS, temp_word); + rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word); if (rc) { err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__); return IRQ_NONE; @@ -975,14 +975,14 @@ static irqreturn_t pcie_isr(int IRQ, void *dev_id, struct pt_regs *regs) /* Clear all events after serving them */ temp_word = 0x1F; - rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS, temp_word); + rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word); if (rc) { err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__); return IRQ_NONE; } /* Unmask Hot-plug Interrupt Enable */ if (!pciehp_poll_mode) { - rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, temp_word); + rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word); if (rc) { err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__); return IRQ_NONE; @@ -992,14 +992,14 @@ static irqreturn_t pcie_isr(int IRQ, void *dev_id, struct pt_regs *regs) dbg("%s: hp_register_read_word SLOT_CTRL with value %x\n", __FUNCTION__, temp_word); temp_word = (temp_word & ~HP_INTR_ENABLE) | HP_INTR_ENABLE; - rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL, temp_word); + rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word); if (rc) { err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__); return IRQ_NONE; } dbg("%s: hp_register_write_word SLOT_CTRL with value %x\n", __FUNCTION__, temp_word); - rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status); + rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status); if (rc) { err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__); return IRQ_NONE; @@ -1008,7 +1008,7 @@ static irqreturn_t pcie_isr(int IRQ, void *dev_id, struct pt_regs *regs) /* Clear command complete interrupt caused by this write */ temp_word = 0x1F; - rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS, temp_word); + rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word); if (rc) { err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__); return IRQ_NONE; @@ -1038,7 +1038,7 @@ static int hpc_get_max_lnk_speed (struct slot *slot, enum pci_bus_speed *value) return -1; } - retval = hp_register_read_dword(php_ctlr->pci_dev, LNK_CAP, lnk_cap); + retval = hp_register_read_dword(php_ctlr->pci_dev, LNK_CAP(slot->ctrl->cap_base), lnk_cap); if (retval) { err("%s : hp_register_read_dword LNK_CAP failed\n", __FUNCTION__); @@ -1079,7 +1079,7 @@ static int hpc_get_max_lnk_width (struct slot *slot, enum pcie_link_width *value return -1; } - retval = hp_register_read_dword(php_ctlr->pci_dev, LNK_CAP, lnk_cap); + retval = hp_register_read_dword(php_ctlr->pci_dev, LNK_CAP(slot->ctrl->cap_base), lnk_cap); if (retval) { err("%s : hp_register_read_dword LNK_CAP failed\n", __FUNCTION__); @@ -1141,7 +1141,7 @@ static int hpc_get_cur_lnk_speed (struct slot *slot, enum pci_bus_speed *value) return -1; } - retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS, lnk_status); + retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS(slot->ctrl->cap_base), lnk_status); if (retval) { err("%s : hp_register_read_word LNK_STATUS failed\n", __FUNCTION__); @@ -1182,7 +1182,7 @@ static int hpc_get_cur_lnk_width (struct slot *slot, enum pcie_link_width *value return -1; } - retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS, lnk_status); + retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS(slot->ctrl->cap_base), lnk_status); if (retval) { err("%s : hp_register_read_word LNK_STATUS failed\n", __FUNCTION__); @@ -1292,47 +1292,48 @@ int pcie_init(struct controller * ctrl, goto abort_free_ctlr; } - pcie_cap_base = cap_base; + ctrl->cap_base = cap_base; dbg("%s: pcie_cap_base %x\n", __FUNCTION__, pcie_cap_base); - rc = hp_register_read_word(pdev, CAP_REG, cap_reg); + rc = hp_register_read_word(pdev, CAP_REG(ctrl->cap_base), cap_reg); if (rc) { err("%s : hp_register_read_word CAP_REG failed\n", __FUNCTION__); goto abort_free_ctlr; } - dbg("%s: CAP_REG offset %x cap_reg %x\n", __FUNCTION__, CAP_REG, cap_reg); + dbg("%s: CAP_REG offset %x cap_reg %x\n", __FUNCTION__, CAP_REG(ctrl->cap_base), cap_reg); - if (((cap_reg & SLOT_IMPL) == 0) || ((cap_reg & DEV_PORT_TYPE) != 0x0040)){ + if (((cap_reg & SLOT_IMPL) == 0) || (((cap_reg & DEV_PORT_TYPE) != 0x0040) + && ((cap_reg & DEV_PORT_TYPE) != 0x0060))) { dbg("%s : This is not a root port or the port is not connected to a slot\n", __FUNCTION__); goto abort_free_ctlr; } - rc = hp_register_read_dword(php_ctlr->pci_dev, SLOT_CAP, slot_cap); + rc = hp_register_read_dword(php_ctlr->pci_dev, SLOT_CAP(ctrl->cap_base), slot_cap); if (rc) { err("%s : hp_register_read_word CAP_REG failed\n", __FUNCTION__); goto abort_free_ctlr; } - dbg("%s: SLOT_CAP offset %x slot_cap %x\n", __FUNCTION__, SLOT_CAP, slot_cap); + dbg("%s: SLOT_CAP offset %x slot_cap %x\n", __FUNCTION__, SLOT_CAP(ctrl->cap_base), slot_cap); if (!(slot_cap & HP_CAP)) { dbg("%s : This slot is not hot-plug capable\n", __FUNCTION__); goto abort_free_ctlr; } /* For debugging purpose */ - rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status); + rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status); if (rc) { err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__); goto abort_free_ctlr; } - dbg("%s: SLOT_STATUS offset %x slot_status %x\n", __FUNCTION__, SLOT_STATUS, slot_status); + dbg("%s: SLOT_STATUS offset %x slot_status %x\n", __FUNCTION__, SLOT_STATUS(ctrl->cap_base), slot_status); - rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL, slot_ctrl); + rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), slot_ctrl); if (rc) { err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__); goto abort_free_ctlr; } - dbg("%s: SLOT_CTRL offset %x slot_ctrl %x\n", __FUNCTION__, SLOT_CTRL, slot_ctrl); + dbg("%s: SLOT_CTRL offset %x slot_ctrl %x\n", __FUNCTION__, SLOT_CTRL(ctrl->cap_base), slot_ctrl); if (first) { spin_lock_init(&hpc_event_lock); @@ -1372,36 +1373,37 @@ int pcie_init(struct controller * ctrl, php_ctlr->num_slots = 1; /* Mask Hot-plug Interrupt Enable */ - rc = hp_register_read_word(pdev, SLOT_CTRL, temp_word); + rc = hp_register_read_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word); if (rc) { err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__); goto abort_free_ctlr; } - dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL, temp_word); + dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL(ctrl->cap_base), temp_word); temp_word = (temp_word & ~HP_INTR_ENABLE & ~CMD_CMPL_INTR_ENABLE) | 0x00; - rc = hp_register_write_word(pdev, SLOT_CTRL, temp_word); + rc = hp_register_write_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word); if (rc) { err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__); goto abort_free_ctlr; } dbg("%s : Mask HPIE hp_register_write_word SLOT_CTRL %x\n", __FUNCTION__, temp_word); - rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status); + rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status); if (rc) { err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__); goto abort_free_ctlr; } - dbg("%s: Mask HPIE SLOT_STATUS offset %x reads slot_status %x\n", __FUNCTION__, SLOT_STATUS, slot_status); + dbg("%s: Mask HPIE SLOT_STATUS offset %x reads slot_status %x\n", __FUNCTION__, SLOT_STATUS(ctrl->cap_base) + , slot_status); temp_word = 0x1F; /* Clear all events */ - rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS, temp_word); + rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word); if (rc) { err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__); goto abort_free_ctlr; } - dbg("%s: SLOT_STATUS offset %x writes slot_status %x\n", __FUNCTION__, SLOT_STATUS, temp_word); + dbg("%s: SLOT_STATUS offset %x writes slot_status %x\n", __FUNCTION__, SLOT_STATUS(ctrl->cap_base), temp_word); if (pciehp_poll_mode) {/* Install interrupt polling code */ /* Install and start the interrupt polling timer */ @@ -1417,12 +1419,12 @@ int pcie_init(struct controller * ctrl, } } - rc = hp_register_read_word(pdev, SLOT_CTRL, temp_word); + rc = hp_register_read_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word); if (rc) { err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__); goto abort_free_ctlr; } - dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL, temp_word); + dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL(ctrl->cap_base), temp_word); dbg("%s: slot_cap %x\n", __FUNCTION__, slot_cap); intr_enable = intr_enable | PRSN_DETECT_ENABLE; @@ -1446,27 +1448,27 @@ int pcie_init(struct controller * ctrl, dbg("%s: temp_word %x\n", __FUNCTION__, temp_word); /* Unmask Hot-plug Interrupt Enable for the interrupt notification mechanism case */ - rc = hp_register_write_word(pdev, SLOT_CTRL, temp_word); + rc = hp_register_write_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word); if (rc) { err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__); goto abort_free_ctlr; } dbg("%s : Unmask HPIE hp_register_write_word SLOT_CTRL with %x\n", __FUNCTION__, temp_word); - rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS, slot_status); + rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status); if (rc) { err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__); goto abort_free_ctlr; } dbg("%s: Unmask HPIE SLOT_STATUS offset %x reads slot_status %x\n", __FUNCTION__, - SLOT_STATUS, slot_status); + SLOT_STATUS(ctrl->cap_base), slot_status); temp_word = 0x1F; /* Clear all events */ - rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS, temp_word); + rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word); if (rc) { err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__); goto abort_free_ctlr; } - dbg("%s: SLOT_STATUS offset %x writes slot_status %x\n", __FUNCTION__, SLOT_STATUS, temp_word); + dbg("%s: SLOT_STATUS offset %x writes slot_status %x\n", __FUNCTION__, SLOT_STATUS(ctrl->cap_base), temp_word); /* Add this HPC instance into the HPC list */ spin_lock(&list_lock); diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index f0c53f850ae..a70a5c5705f 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -95,7 +95,7 @@ static struct hotplug_slot_ops shpchp_hotplug_slot_ops = { */ static void release_slot(struct hotplug_slot *hotplug_slot) { - struct slot *slot = (struct slot *)hotplug_slot->private; + struct slot *slot = hotplug_slot->private; dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name); diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index 9f90eb8e6ec..490a9553a06 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -1885,7 +1885,7 @@ int shpchp_enable_slot (struct slot *p_slot) func = shpchp_slot_find(p_slot->bus, p_slot->device, 0); if (!func) { dbg("%s: Error! slot NULL\n", __FUNCTION__); - return 1; + return -ENODEV; } /* Check to see if (latch closed, card present, power off) */ @@ -1894,19 +1894,19 @@ int shpchp_enable_slot (struct slot *p_slot) if (rc || !getstatus) { info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number); up(&p_slot->ctrl->crit_sect); - return 1; + return -ENODEV; } rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (rc || getstatus) { info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number); up(&p_slot->ctrl->crit_sect); - return 1; + return -ENODEV; } rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (rc || getstatus) { info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number); up(&p_slot->ctrl->crit_sect); - return 1; + return -ENODEV; } up(&p_slot->ctrl->crit_sect); @@ -1914,7 +1914,7 @@ int shpchp_enable_slot (struct slot *p_slot) func = shpchp_slot_create(p_slot->bus); if (func == NULL) - return 1; + return -ENOMEM; func->bus = p_slot->bus; func->device = p_slot->device; @@ -1939,7 +1939,7 @@ int shpchp_enable_slot (struct slot *p_slot) /* Setup slot structure with entry for empty slot */ func = shpchp_slot_create(p_slot->bus); if (func == NULL) - return (1); /* Out of memory */ + return -ENOMEM; /* Out of memory */ func->bus = p_slot->bus; func->device = p_slot->device; @@ -1972,7 +1972,7 @@ int shpchp_disable_slot (struct slot *p_slot) struct pci_func *func; if (!p_slot->ctrl) - return 1; + return -ENODEV; pci_bus = p_slot->ctrl->pci_dev->subordinate; @@ -1983,19 +1983,19 @@ int shpchp_disable_slot (struct slot *p_slot) if (ret || !getstatus) { info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number); up(&p_slot->ctrl->crit_sect); - return 1; + return -ENODEV; } ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (ret || getstatus) { info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number); up(&p_slot->ctrl->crit_sect); - return 1; + return -ENODEV; } ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (ret || !getstatus) { info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number); up(&p_slot->ctrl->crit_sect); - return 1; + return -ENODEV; } up(&p_slot->ctrl->crit_sect); @@ -2011,7 +2011,7 @@ int shpchp_disable_slot (struct slot *p_slot) /* Check the Class Code */ rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code); if (rc) - return rc; + return -ENODEV; if (class_code == PCI_BASE_CLASS_DISPLAY) { /* Display/Video adapter (not supported) */ @@ -2020,13 +2020,13 @@ int shpchp_disable_slot (struct slot *p_slot) /* See if it's a bridge */ rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); if (rc) - return rc; + return -ENODEV; /* If it's a bridge, check the VGA Enable bit */ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR); if (rc) - return rc; + return -ENODEV; /* If the VGA Enable bit is set, remove isn't supported */ if (BCR & PCI_BRIDGE_CTL_VGA) { @@ -2042,12 +2042,12 @@ int shpchp_disable_slot (struct slot *p_slot) if ((func != NULL) && !rc) { rc = remove_board(func, p_slot->ctrl); } else if (!rc) - rc = 1; + rc = -ENODEV; if (p_slot) update_slot_info(p_slot); - return(rc); + return rc; } diff --git a/drivers/pci/hotplug/shpchprm_acpi.c b/drivers/pci/hotplug/shpchprm_acpi.c index 243a51d88b8..7957cdc72cd 100644 --- a/drivers/pci/hotplug/shpchprm_acpi.c +++ b/drivers/pci/hotplug/shpchprm_acpi.c @@ -1626,7 +1626,7 @@ int shpchprm_set_hpp( pci_bus->number = func->bus; devfn = PCI_DEVFN(func->device, func->function); - ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->bus); + ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus); if (ab) { if (ab->_hpp) { @@ -1681,7 +1681,7 @@ void shpchprm_enable_card( | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; bcmd = bcommand = bcommand | PCI_BRIDGE_CTL_NO_ISA; - ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->bus); + ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus); if (ab) { if (ab->_hpp) { if (ab->_hpp->enable_perr) { diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 8568b207f18..6ca0061137a 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -73,6 +73,17 @@ resource_show(struct device * dev, char * buf) return (str - buf); } +static ssize_t modalias_show(struct device *dev, char *buf) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + + return sprintf(buf, "pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x\n", + pci_dev->vendor, pci_dev->device, + pci_dev->subsystem_vendor, pci_dev->subsystem_device, + (u8)(pci_dev->class >> 16), (u8)(pci_dev->class >> 8), + (u8)(pci_dev->class)); +} + struct device_attribute pci_dev_attrs[] = { __ATTR_RO(resource), __ATTR_RO(vendor), @@ -82,6 +93,7 @@ struct device_attribute pci_dev_attrs[] = { __ATTR_RO(class), __ATTR_RO(irq), __ATTR_RO(local_cpus), + __ATTR_RO(modalias), __ATTR_NULL, }; diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 79cdc16c52c..744da0d4ae5 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -32,33 +32,6 @@ extern unsigned char pci_max_busnr(void); extern unsigned char pci_bus_max_busnr(struct pci_bus *bus); extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap); -struct pci_dev_wrapped { - struct pci_dev *dev; - void *data; -}; - -struct pci_bus_wrapped { - struct pci_bus *bus; - void *data; -}; - -struct pci_visit { - int (* pre_visit_pci_bus) (struct pci_bus_wrapped *, - struct pci_dev_wrapped *); - int (* post_visit_pci_bus) (struct pci_bus_wrapped *, - struct pci_dev_wrapped *); - - int (* pre_visit_pci_dev) (struct pci_dev_wrapped *, - struct pci_bus_wrapped *); - int (* visit_pci_dev) (struct pci_dev_wrapped *, - struct pci_bus_wrapped *); - int (* post_visit_pci_dev) (struct pci_dev_wrapped *, - struct pci_bus_wrapped *); -}; - -extern int pci_visit_dev(struct pci_visit *fn, - struct pci_dev_wrapped *wrapped_dev, - struct pci_bus_wrapped *wrapped_parent); extern void pci_remove_legacy_files(struct pci_bus *bus); /* Lock for read/write access to pci device and bus lists */ diff --git a/drivers/pci/pcie/portdrv_bus.c b/drivers/pci/pcie/portdrv_bus.c index 4037a3e568d..3e84b501e6a 100644 --- a/drivers/pci/pcie/portdrv_bus.c +++ b/drivers/pci/pcie/portdrv_bus.c @@ -39,7 +39,8 @@ static int pcie_port_bus_match(struct device *dev, struct device_driver *drv) driver->id_table->vendor != pciedev->id.vendor) || (driver->id_table->device != PCI_ANY_ID && driver->id_table->device != pciedev->id.device) || - driver->id_table->port_type != pciedev->id.port_type || + (driver->id_table->port_type != PCIE_ANY_PORT && + driver->id_table->port_type != pciedev->id.port_type) || driver->id_table->service_type != pciedev->id.service_type ) return 0; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 026aa04669a..637e9493034 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -18,6 +18,7 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/delay.h> +#include <linux/acpi.h> #include "pci.h" /* Deal with broken BIOS'es that neglect to enable passive release, @@ -467,9 +468,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC, * non-x86 architectures (yes Via exists on PPC among other places), * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get * interrupts delivered properly. - * - * TODO: When we have device-specific interrupt routers, - * quirk_via_irqpic will go away from quirks. */ /* @@ -494,6 +492,29 @@ static void __devinit quirk_via_acpi(struct pci_dev *d) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi ); +static void quirk_via_irqpic(struct pci_dev *dev) +{ + u8 irq, new_irq; + +#ifdef CONFIG_X86_IO_APIC + if (nr_ioapics && !skip_ioapic_setup) + return; +#endif +#ifdef CONFIG_ACPI + if (acpi_irq_model != ACPI_IRQ_MODEL_PIC) + return; +#endif + new_irq = dev->irq & 0xf; + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); + if (new_irq != irq) { + printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n", + pci_name(dev), irq, new_irq); + udelay(15); /* unknown if delay really needed */ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); + } +} +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic); + /* * PIIX3 USB: We have to disable USB interrupts that are * hardwired to PIRQD# and may be shared with an @@ -683,19 +704,6 @@ static void __init quirk_disable_pxb(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb ); -/* - * VIA northbridges care about PCI_INTERRUPT_LINE - */ -int via_interrupt_line_quirk; - -static void __devinit quirk_via_bridge(struct pci_dev *pdev) -{ - if(pdev->devfn == 0) { - printk(KERN_INFO "PCI: Via IRQ fixup\n"); - via_interrupt_line_quirk = 1; - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_bridge ); /* * Serverworks CSB5 IDE does not fully support native mode diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 66150d08b5c..c4ade288c5d 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -1592,9 +1592,9 @@ static int __init init_pcmcia_bus(void) /* Set up character device for user mode clients */ i = register_chrdev(0, "pcmcia", &ds_fops); - if (i == -EBUSY) + if (i < 0) printk(KERN_NOTICE "unable to find a free device # for " - "Driver Services\n"); + "Driver Services (error=%d)\n", i); else major_dev = i; diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 02cfe244e06..ceeb3cf64a1 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -7,7 +7,7 @@ * Bugreports.to..: <Linux390@de.ibm.com> * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999-2001 * - * $Revision: 1.161 $ + * $Revision: 1.164 $ */ #include <linux/config.h> @@ -1766,10 +1766,10 @@ dasd_generic_probe (struct ccw_device *cdev, printk(KERN_WARNING "dasd_generic_probe: could not add sysfs entries " "for %s\n", cdev->dev.bus_id); + } else { + cdev->handler = &dasd_int_handler; } - cdev->handler = &dasd_int_handler; - return ret; } @@ -1780,6 +1780,8 @@ dasd_generic_remove (struct ccw_device *cdev) { struct dasd_device *device; + cdev->handler = NULL; + dasd_remove_sysfs_files(cdev); device = dasd_device_from_cdev(cdev); if (IS_ERR(device)) @@ -1810,14 +1812,14 @@ dasd_generic_set_online (struct ccw_device *cdev, struct dasd_device *device; int feature_diag, rc; - feature_diag = dasd_get_feature(cdev, DASD_FEATURE_USEDIAG); - if (feature_diag < 0) - return feature_diag; - device = dasd_create_device(cdev); if (IS_ERR(device)) return PTR_ERR(device); + feature_diag = dasd_get_feature(cdev, DASD_FEATURE_USEDIAG); + if (feature_diag < 0) + return feature_diag; + if (feature_diag) { if (!dasd_diag_discipline_pointer) { printk (KERN_WARNING diff --git a/drivers/s390/net/Makefile b/drivers/s390/net/Makefile index 7cabb80a2e4..90d4d0ef3dd 100644 --- a/drivers/s390/net/Makefile +++ b/drivers/s390/net/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_NETIUCV) += netiucv.o fsm.o obj-$(CONFIG_SMSGIUCV) += smsgiucv.o obj-$(CONFIG_CTC) += ctc.o fsm.o cu3088.o obj-$(CONFIG_LCS) += lcs.o cu3088.o -qeth-y := qeth_main.o qeth_mpc.o qeth_sys.o qeth_eddp.o qeth_tso.o +obj-$(CONFIG_CLAW) += claw.o cu3088.o +qeth-y := qeth_main.o qeth_mpc.o qeth_sys.o qeth_eddp.o qeth-$(CONFIG_PROC_FS) += qeth_proc.o obj-$(CONFIG_QETH) += qeth.o diff --git a/drivers/s390/net/ctcdbug.h b/drivers/s390/net/ctcdbug.h index ef888395172..7fe2ebd1792 100644 --- a/drivers/s390/net/ctcdbug.h +++ b/drivers/s390/net/ctcdbug.h @@ -1,6 +1,6 @@ /* * - * linux/drivers/s390/net/ctcdbug.h ($Revision: 1.4 $) + * linux/drivers/s390/net/ctcdbug.h ($Revision: 1.5 $) * * CTC / ESCON network driver - s390 dbf exploit. * @@ -9,7 +9,7 @@ * Author(s): Original Code written by * Peter Tiedemann (ptiedem@de.ibm.com) * - * $Revision: 1.4 $ $Date: 2004/10/15 09:26:58 $ + * $Revision: 1.5 $ $Date: 2005/02/27 19:46:44 $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -25,9 +25,11 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ - +#ifndef _CTCDBUG_H_ +#define _CTCDBUG_H_ #include <asm/debug.h> +#include "ctcmain.h" /** * Debug Facility stuff */ @@ -41,7 +43,7 @@ #define CTC_DBF_DATA_LEN 128 #define CTC_DBF_DATA_INDEX 3 #define CTC_DBF_DATA_NR_AREAS 1 -#define CTC_DBF_DATA_LEVEL 2 +#define CTC_DBF_DATA_LEVEL 3 #define CTC_DBF_TRACE_NAME "ctc_trace" #define CTC_DBF_TRACE_LEN 16 @@ -121,3 +123,5 @@ hex_dump(unsigned char *buf, size_t len) printk("\n"); } + +#endif diff --git a/drivers/s390/net/ctcmain.c b/drivers/s390/net/ctcmain.c index 7266bf5ea65..ff3e95e07e8 100644 --- a/drivers/s390/net/ctcmain.c +++ b/drivers/s390/net/ctcmain.c @@ -1,5 +1,5 @@ /* - * $Id: ctcmain.c,v 1.72 2005/03/17 10:51:52 ptiedem Exp $ + * $Id: ctcmain.c,v 1.74 2005/03/24 09:04:17 mschwide Exp $ * * CTC / ESCON network driver * @@ -37,12 +37,11 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * RELEASE-TAG: CTC/ESCON network driver $Revision: 1.72 $ + * RELEASE-TAG: CTC/ESCON network driver $Revision: 1.74 $ * */ #undef DEBUG - #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> @@ -74,288 +73,13 @@ #include "ctctty.h" #include "fsm.h" #include "cu3088.h" + #include "ctcdbug.h" +#include "ctcmain.h" MODULE_AUTHOR("(C) 2000 IBM Corp. by Fritz Elfert (felfert@millenux.com)"); MODULE_DESCRIPTION("Linux for S/390 CTC/Escon Driver"); MODULE_LICENSE("GPL"); - -/** - * CCW commands, used in this driver. - */ -#define CCW_CMD_WRITE 0x01 -#define CCW_CMD_READ 0x02 -#define CCW_CMD_SET_EXTENDED 0xc3 -#define CCW_CMD_PREPARE 0xe3 - -#define CTC_PROTO_S390 0 -#define CTC_PROTO_LINUX 1 -#define CTC_PROTO_LINUX_TTY 2 -#define CTC_PROTO_OS390 3 -#define CTC_PROTO_MAX 3 - -#define CTC_BUFSIZE_LIMIT 65535 -#define CTC_BUFSIZE_DEFAULT 32768 - -#define CTC_TIMEOUT_5SEC 5000 - -#define CTC_INITIAL_BLOCKLEN 2 - -#define READ 0 -#define WRITE 1 - -#define CTC_ID_SIZE BUS_ID_SIZE+3 - - -struct ctc_profile { - unsigned long maxmulti; - unsigned long maxcqueue; - unsigned long doios_single; - unsigned long doios_multi; - unsigned long txlen; - unsigned long tx_time; - struct timespec send_stamp; -}; - -/** - * Definition of one channel - */ -struct channel { - - /** - * Pointer to next channel in list. - */ - struct channel *next; - char id[CTC_ID_SIZE]; - struct ccw_device *cdev; - - /** - * Type of this channel. - * CTC/A or Escon for valid channels. - */ - enum channel_types type; - - /** - * Misc. flags. See CHANNEL_FLAGS_... below - */ - __u32 flags; - - /** - * The protocol of this channel - */ - __u16 protocol; - - /** - * I/O and irq related stuff - */ - struct ccw1 *ccw; - struct irb *irb; - - /** - * RX/TX buffer size - */ - int max_bufsize; - - /** - * Transmit/Receive buffer. - */ - struct sk_buff *trans_skb; - - /** - * Universal I/O queue. - */ - struct sk_buff_head io_queue; - - /** - * TX queue for collecting skb's during busy. - */ - struct sk_buff_head collect_queue; - - /** - * Amount of data in collect_queue. - */ - int collect_len; - - /** - * spinlock for collect_queue and collect_len - */ - spinlock_t collect_lock; - - /** - * Timer for detecting unresposive - * I/O operations. - */ - fsm_timer timer; - - /** - * Retry counter for misc. operations. - */ - int retry; - - /** - * The finite state machine of this channel - */ - fsm_instance *fsm; - - /** - * The corresponding net_device this channel - * belongs to. - */ - struct net_device *netdev; - - struct ctc_profile prof; - - unsigned char *trans_skb_data; - - __u16 logflags; -}; - -#define CHANNEL_FLAGS_READ 0 -#define CHANNEL_FLAGS_WRITE 1 -#define CHANNEL_FLAGS_INUSE 2 -#define CHANNEL_FLAGS_BUFSIZE_CHANGED 4 -#define CHANNEL_FLAGS_FAILED 8 -#define CHANNEL_FLAGS_WAITIRQ 16 -#define CHANNEL_FLAGS_RWMASK 1 -#define CHANNEL_DIRECTION(f) (f & CHANNEL_FLAGS_RWMASK) - -#define LOG_FLAG_ILLEGALPKT 1 -#define LOG_FLAG_ILLEGALSIZE 2 -#define LOG_FLAG_OVERRUN 4 -#define LOG_FLAG_NOMEM 8 - -#define CTC_LOGLEVEL_INFO 1 -#define CTC_LOGLEVEL_NOTICE 2 -#define CTC_LOGLEVEL_WARN 4 -#define CTC_LOGLEVEL_EMERG 8 -#define CTC_LOGLEVEL_ERR 16 -#define CTC_LOGLEVEL_DEBUG 32 -#define CTC_LOGLEVEL_CRIT 64 - -#define CTC_LOGLEVEL_DEFAULT \ -(CTC_LOGLEVEL_INFO | CTC_LOGLEVEL_NOTICE | CTC_LOGLEVEL_WARN | CTC_LOGLEVEL_CRIT) - -#define CTC_LOGLEVEL_MAX ((CTC_LOGLEVEL_CRIT<<1)-1) - -static int loglevel = CTC_LOGLEVEL_DEFAULT; - -#define ctc_pr_debug(fmt, arg...) \ -do { if (loglevel & CTC_LOGLEVEL_DEBUG) printk(KERN_DEBUG fmt,##arg); } while (0) - -#define ctc_pr_info(fmt, arg...) \ -do { if (loglevel & CTC_LOGLEVEL_INFO) printk(KERN_INFO fmt,##arg); } while (0) - -#define ctc_pr_notice(fmt, arg...) \ -do { if (loglevel & CTC_LOGLEVEL_NOTICE) printk(KERN_NOTICE fmt,##arg); } while (0) - -#define ctc_pr_warn(fmt, arg...) \ -do { if (loglevel & CTC_LOGLEVEL_WARN) printk(KERN_WARNING fmt,##arg); } while (0) - -#define ctc_pr_emerg(fmt, arg...) \ -do { if (loglevel & CTC_LOGLEVEL_EMERG) printk(KERN_EMERG fmt,##arg); } while (0) - -#define ctc_pr_err(fmt, arg...) \ -do { if (loglevel & CTC_LOGLEVEL_ERR) printk(KERN_ERR fmt,##arg); } while (0) - -#define ctc_pr_crit(fmt, arg...) \ -do { if (loglevel & CTC_LOGLEVEL_CRIT) printk(KERN_CRIT fmt,##arg); } while (0) - -/** - * Linked list of all detected channels. - */ -static struct channel *channels = NULL; - -struct ctc_priv { - struct net_device_stats stats; - unsigned long tbusy; - /** - * The finite state machine of this interface. - */ - fsm_instance *fsm; - /** - * The protocol of this device - */ - __u16 protocol; - /** - * Timer for restarting after I/O Errors - */ - fsm_timer restart_timer; - - int buffer_size; - - struct channel *channel[2]; -}; - -/** - * Definition of our link level header. - */ -struct ll_header { - __u16 length; - __u16 type; - __u16 unused; -}; -#define LL_HEADER_LENGTH (sizeof(struct ll_header)) - -/** - * Compatibility macros for busy handling - * of network devices. - */ -static __inline__ void -ctc_clear_busy(struct net_device * dev) -{ - clear_bit(0, &(((struct ctc_priv *) dev->priv)->tbusy)); - if (((struct ctc_priv *)dev->priv)->protocol != CTC_PROTO_LINUX_TTY) - netif_wake_queue(dev); -} - -static __inline__ int -ctc_test_and_set_busy(struct net_device * dev) -{ - if (((struct ctc_priv *)dev->priv)->protocol != CTC_PROTO_LINUX_TTY) - netif_stop_queue(dev); - return test_and_set_bit(0, &((struct ctc_priv *) dev->priv)->tbusy); -} - -/** - * Print Banner. - */ -static void -print_banner(void) -{ - static int printed = 0; - char vbuf[] = "$Revision: 1.72 $"; - char *version = vbuf; - - if (printed) - return; - if ((version = strchr(version, ':'))) { - char *p = strchr(version + 1, '$'); - if (p) - *p = '\0'; - } else - version = " ??? "; - printk(KERN_INFO "CTC driver Version%s" -#ifdef DEBUG - " (DEBUG-VERSION, " __DATE__ __TIME__ ")" -#endif - " initialized\n", version); - printed = 1; -} - -/** - * Return type of a detected device. - */ -static enum channel_types -get_channel_type(struct ccw_device_id *id) -{ - enum channel_types type = (enum channel_types) id->driver_info; - - if (type == channel_type_ficon) - type = channel_type_escon; - - return type; -} - /** * States of the interface statemachine. */ @@ -371,7 +95,7 @@ enum dev_states { /** * MUST be always the last element!! */ - NR_DEV_STATES + CTC_NR_DEV_STATES }; static const char *dev_state_names[] = { @@ -399,7 +123,7 @@ enum dev_events { /** * MUST be always the last element!! */ - NR_DEV_EVENTS + CTC_NR_DEV_EVENTS }; static const char *dev_event_names[] = { @@ -476,40 +200,6 @@ enum ch_events { NR_CH_EVENTS, }; -static const char *ch_event_names[] = { - "ccw_device success", - "ccw_device busy", - "ccw_device enodev", - "ccw_device ioerr", - "ccw_device unknown", - - "Status ATTN & BUSY", - "Status ATTN", - "Status BUSY", - - "Unit check remote reset", - "Unit check remote system reset", - "Unit check TX timeout", - "Unit check TX parity", - "Unit check Hardware failure", - "Unit check RX parity", - "Unit check ZERO", - "Unit check Unknown", - - "SubChannel check Unknown", - - "Machine check failure", - "Machine check operational", - - "IRQ normal", - "IRQ final", - - "Timer", - - "Start", - "Stop", -}; - /** * States of the channel statemachine. */ @@ -545,6 +235,87 @@ enum ch_states { NR_CH_STATES, }; +static int loglevel = CTC_LOGLEVEL_DEFAULT; + +/** + * Linked list of all detected channels. + */ +static struct channel *channels = NULL; + +/** + * Print Banner. + */ +static void +print_banner(void) +{ + static int printed = 0; + char vbuf[] = "$Revision: 1.74 $"; + char *version = vbuf; + + if (printed) + return; + if ((version = strchr(version, ':'))) { + char *p = strchr(version + 1, '$'); + if (p) + *p = '\0'; + } else + version = " ??? "; + printk(KERN_INFO "CTC driver Version%s" +#ifdef DEBUG + " (DEBUG-VERSION, " __DATE__ __TIME__ ")" +#endif + " initialized\n", version); + printed = 1; +} + +/** + * Return type of a detected device. + */ +static enum channel_types +get_channel_type(struct ccw_device_id *id) +{ + enum channel_types type = (enum channel_types) id->driver_info; + + if (type == channel_type_ficon) + type = channel_type_escon; + + return type; +} + +static const char *ch_event_names[] = { + "ccw_device success", + "ccw_device busy", + "ccw_device enodev", + "ccw_device ioerr", + "ccw_device unknown", + + "Status ATTN & BUSY", + "Status ATTN", + "Status BUSY", + + "Unit check remote reset", + "Unit check remote system reset", + "Unit check TX timeout", + "Unit check TX parity", + "Unit check Hardware failure", + "Unit check RX parity", + "Unit check ZERO", + "Unit check Unknown", + + "SubChannel check Unknown", + + "Machine check failure", + "Machine check operational", + + "IRQ normal", + "IRQ final", + + "Timer", + + "Start", + "Stop", +}; + static const char *ch_state_names[] = { "Idle", "Stopped", @@ -1934,7 +1705,6 @@ add_channel(struct ccw_device *cdev, enum channel_types type) ch->cdev = cdev; snprintf(ch->id, CTC_ID_SIZE, "ch-%s", cdev->dev.bus_id); ch->type = type; - loglevel = CTC_LOGLEVEL_DEFAULT; ch->fsm = init_fsm(ch->id, ch_state_names, ch_event_names, NR_CH_STATES, NR_CH_EVENTS, ch_fsm, CH_FSM_LEN, GFP_KERNEL); @@ -2697,6 +2467,7 @@ ctc_stats(struct net_device * dev) /* * sysfs attributes */ + static ssize_t buffer_show(struct device *dev, char *buf) { @@ -2715,57 +2486,61 @@ buffer_write(struct device *dev, const char *buf, size_t count) struct ctc_priv *priv; struct net_device *ndev; int bs1; + char buffer[16]; DBF_TEXT(trace, 3, __FUNCTION__); + DBF_TEXT(trace, 3, buf); priv = dev->driver_data; - if (!priv) + if (!priv) { + DBF_TEXT(trace, 3, "bfnopriv"); return -ENODEV; + } + + sscanf(buf, "%u", &bs1); + if (bs1 > CTC_BUFSIZE_LIMIT) + goto einval; + if (bs1 < (576 + LL_HEADER_LENGTH + 2)) + goto einval; + priv->buffer_size = bs1; // just to overwrite the default + ndev = priv->channel[READ]->netdev; - if (!ndev) + if (!ndev) { + DBF_TEXT(trace, 3, "bfnondev"); return -ENODEV; - sscanf(buf, "%u", &bs1); + } - if (bs1 > CTC_BUFSIZE_LIMIT) - return -EINVAL; if ((ndev->flags & IFF_RUNNING) && (bs1 < (ndev->mtu + LL_HEADER_LENGTH + 2))) - return -EINVAL; - if (bs1 < (576 + LL_HEADER_LENGTH + 2)) - return -EINVAL; + goto einval; - priv->buffer_size = bs1; - priv->channel[READ]->max_bufsize = - priv->channel[WRITE]->max_bufsize = bs1; + priv->channel[READ]->max_bufsize = bs1; + priv->channel[WRITE]->max_bufsize = bs1; if (!(ndev->flags & IFF_RUNNING)) ndev->mtu = bs1 - LL_HEADER_LENGTH - 2; priv->channel[READ]->flags |= CHANNEL_FLAGS_BUFSIZE_CHANGED; priv->channel[WRITE]->flags |= CHANNEL_FLAGS_BUFSIZE_CHANGED; + sprintf(buffer, "%d",priv->buffer_size); + DBF_TEXT(trace, 3, buffer); return count; +einval: + DBF_TEXT(trace, 3, "buff_err"); + return -EINVAL; } static ssize_t loglevel_show(struct device *dev, char *buf) { - struct ctc_priv *priv; - - priv = dev->driver_data; - if (!priv) - return -ENODEV; return sprintf(buf, "%d\n", loglevel); } static ssize_t loglevel_write(struct device *dev, const char *buf, size_t count) { - struct ctc_priv *priv; int ll1; DBF_TEXT(trace, 5, __FUNCTION__); - priv = dev->driver_data; - if (!priv) - return -ENODEV; sscanf(buf, "%i", &ll1); if ((ll1 > CTC_LOGLEVEL_MAX) || (ll1 < 0)) @@ -2835,27 +2610,6 @@ stats_write(struct device *dev, const char *buf, size_t count) return count; } -static DEVICE_ATTR(buffer, 0644, buffer_show, buffer_write); -static DEVICE_ATTR(loglevel, 0644, loglevel_show, loglevel_write); -static DEVICE_ATTR(stats, 0644, stats_show, stats_write); - -static int -ctc_add_attributes(struct device *dev) -{ -// device_create_file(dev, &dev_attr_buffer); - device_create_file(dev, &dev_attr_loglevel); - device_create_file(dev, &dev_attr_stats); - return 0; -} - -static void -ctc_remove_attributes(struct device *dev) -{ - device_remove_file(dev, &dev_attr_stats); - device_remove_file(dev, &dev_attr_loglevel); -// device_remove_file(dev, &dev_attr_buffer); -} - static void ctc_netdev_unregister(struct net_device * dev) @@ -2899,52 +2653,6 @@ ctc_free_netdevice(struct net_device * dev, int free_dev) #endif } -/** - * Initialize everything of the net device except the name and the - * channel structs. - */ -static struct net_device * -ctc_init_netdevice(struct net_device * dev, int alloc_device, - struct ctc_priv *privptr) -{ - if (!privptr) - return NULL; - - DBF_TEXT(setup, 3, __FUNCTION__); - if (alloc_device) { - dev = kmalloc(sizeof (struct net_device), GFP_KERNEL); - if (!dev) - return NULL; - memset(dev, 0, sizeof (struct net_device)); - } - - dev->priv = privptr; - privptr->fsm = init_fsm("ctcdev", dev_state_names, - dev_event_names, NR_DEV_STATES, NR_DEV_EVENTS, - dev_fsm, DEV_FSM_LEN, GFP_KERNEL); - if (privptr->fsm == NULL) { - if (alloc_device) - kfree(dev); - return NULL; - } - fsm_newstate(privptr->fsm, DEV_STATE_STOPPED); - fsm_settimer(privptr->fsm, &privptr->restart_timer); - if (dev->mtu == 0) - dev->mtu = CTC_BUFSIZE_DEFAULT - LL_HEADER_LENGTH - 2; - dev->hard_start_xmit = ctc_tx; - dev->open = ctc_open; - dev->stop = ctc_close; - dev->get_stats = ctc_stats; - dev->change_mtu = ctc_change_mtu; - dev->hard_header_len = LL_HEADER_LENGTH + 2; - dev->addr_len = 0; - dev->type = ARPHRD_SLIP; - dev->tx_queue_len = 100; - dev->flags = IFF_POINTOPOINT | IFF_NOARP; - SET_MODULE_OWNER(dev); - return dev; -} - static ssize_t ctc_proto_show(struct device *dev, char *buf) { @@ -2977,7 +2685,6 @@ ctc_proto_store(struct device *dev, const char *buf, size_t count) return count; } -static DEVICE_ATTR(protocol, 0644, ctc_proto_show, ctc_proto_store); static ssize_t ctc_type_show(struct device *dev, char *buf) @@ -2991,8 +2698,13 @@ ctc_type_show(struct device *dev, char *buf) return sprintf(buf, "%s\n", cu3088_type[cgdev->cdev[0]->id.driver_info]); } +static DEVICE_ATTR(buffer, 0644, buffer_show, buffer_write); +static DEVICE_ATTR(protocol, 0644, ctc_proto_show, ctc_proto_store); static DEVICE_ATTR(type, 0444, ctc_type_show, NULL); +static DEVICE_ATTR(loglevel, 0644, loglevel_show, loglevel_write); +static DEVICE_ATTR(stats, 0644, stats_show, stats_write); + static struct attribute *ctc_attr[] = { &dev_attr_protocol.attr, &dev_attr_type.attr, @@ -3005,6 +2717,21 @@ static struct attribute_group ctc_attr_group = { }; static int +ctc_add_attributes(struct device *dev) +{ + device_create_file(dev, &dev_attr_loglevel); + device_create_file(dev, &dev_attr_stats); + return 0; +} + +static void +ctc_remove_attributes(struct device *dev) +{ + device_remove_file(dev, &dev_attr_stats); + device_remove_file(dev, &dev_attr_loglevel); +} + +static int ctc_add_files(struct device *dev) { pr_debug("%s() called\n", __FUNCTION__); @@ -3028,15 +2755,15 @@ ctc_remove_files(struct device *dev) * * @returns 0 on success, !0 on failure. */ - static int ctc_probe_device(struct ccwgroup_device *cgdev) { struct ctc_priv *priv; int rc; + char buffer[16]; pr_debug("%s() called\n", __FUNCTION__); - DBF_TEXT(trace, 3, __FUNCTION__); + DBF_TEXT(setup, 3, __FUNCTION__); if (!get_device(&cgdev->dev)) return -ENODEV; @@ -3060,10 +2787,70 @@ ctc_probe_device(struct ccwgroup_device *cgdev) cgdev->cdev[1]->handler = ctc_irq_handler; cgdev->dev.driver_data = priv; + sprintf(buffer, "%p", priv); + DBF_TEXT(data, 3, buffer); + + sprintf(buffer, "%u", (unsigned int)sizeof(struct ctc_priv)); + DBF_TEXT(data, 3, buffer); + + sprintf(buffer, "%p", &channels); + DBF_TEXT(data, 3, buffer); + + sprintf(buffer, "%u", (unsigned int)sizeof(struct channel)); + DBF_TEXT(data, 3, buffer); + return 0; } /** + * Initialize everything of the net device except the name and the + * channel structs. + */ +static struct net_device * +ctc_init_netdevice(struct net_device * dev, int alloc_device, + struct ctc_priv *privptr) +{ + if (!privptr) + return NULL; + + DBF_TEXT(setup, 3, __FUNCTION__); + + if (alloc_device) { + dev = kmalloc(sizeof (struct net_device), GFP_KERNEL); + if (!dev) + return NULL; + memset(dev, 0, sizeof (struct net_device)); + } + + dev->priv = privptr; + privptr->fsm = init_fsm("ctcdev", dev_state_names, + dev_event_names, CTC_NR_DEV_STATES, CTC_NR_DEV_EVENTS, + dev_fsm, DEV_FSM_LEN, GFP_KERNEL); + if (privptr->fsm == NULL) { + if (alloc_device) + kfree(dev); + return NULL; + } + fsm_newstate(privptr->fsm, DEV_STATE_STOPPED); + fsm_settimer(privptr->fsm, &privptr->restart_timer); + if (dev->mtu == 0) + dev->mtu = CTC_BUFSIZE_DEFAULT - LL_HEADER_LENGTH - 2; + dev->hard_start_xmit = ctc_tx; + dev->open = ctc_open; + dev->stop = ctc_close; + dev->get_stats = ctc_stats; + dev->change_mtu = ctc_change_mtu; + dev->hard_header_len = LL_HEADER_LENGTH + 2; + dev->addr_len = 0; + dev->type = ARPHRD_SLIP; + dev->tx_queue_len = 100; + dev->flags = IFF_POINTOPOINT | IFF_NOARP; + SET_MODULE_OWNER(dev); + return dev; +} + + +/** * * Setup an interface. * @@ -3081,6 +2868,7 @@ ctc_new_device(struct ccwgroup_device *cgdev) struct ctc_priv *privptr; struct net_device *dev; int ret; + char buffer[16]; pr_debug("%s() called\n", __FUNCTION__); DBF_TEXT(setup, 3, __FUNCTION__); @@ -3089,6 +2877,9 @@ ctc_new_device(struct ccwgroup_device *cgdev) if (!privptr) return -ENODEV; + sprintf(buffer, "%d", privptr->buffer_size); + DBF_TEXT(setup, 3, buffer); + type = get_channel_type(&cgdev->cdev[0]->id); snprintf(read_id, CTC_ID_SIZE, "ch-%s", cgdev->cdev[0]->dev.bus_id); @@ -3177,9 +2968,10 @@ ctc_shutdown_device(struct ccwgroup_device *cgdev) struct ctc_priv *priv; struct net_device *ndev; - DBF_TEXT(trace, 3, __FUNCTION__); + DBF_TEXT(setup, 3, __FUNCTION__); pr_debug("%s() called\n", __FUNCTION__); + priv = cgdev->dev.driver_data; ndev = NULL; if (!priv) @@ -3215,7 +3007,6 @@ ctc_shutdown_device(struct ccwgroup_device *cgdev) channel_remove(priv->channel[READ]); if (priv->channel[WRITE]) channel_remove(priv->channel[WRITE]); - priv->channel[READ] = priv->channel[WRITE] = NULL; return 0; @@ -3228,7 +3019,7 @@ ctc_remove_device(struct ccwgroup_device *cgdev) struct ctc_priv *priv; pr_debug("%s() called\n", __FUNCTION__); - DBF_TEXT(trace, 3, __FUNCTION__); + DBF_TEXT(setup, 3, __FUNCTION__); priv = cgdev->dev.driver_data; if (!priv) @@ -3265,6 +3056,7 @@ static struct ccwgroup_driver ctc_group_driver = { static void __exit ctc_exit(void) { + DBF_TEXT(setup, 3, __FUNCTION__); unregister_cu3088_discipline(&ctc_group_driver); ctc_tty_cleanup(); ctc_unregister_dbf_views(); @@ -3282,6 +3074,10 @@ ctc_init(void) { int ret = 0; + loglevel = CTC_LOGLEVEL_DEFAULT; + + DBF_TEXT(setup, 3, __FUNCTION__); + print_banner(); ret = ctc_register_dbf_views(); diff --git a/drivers/s390/net/ctcmain.h b/drivers/s390/net/ctcmain.h new file mode 100644 index 00000000000..ba3605f1633 --- /dev/null +++ b/drivers/s390/net/ctcmain.h @@ -0,0 +1,276 @@ +/* + * $Id: ctcmain.h,v 1.4 2005/03/24 09:04:17 mschwide Exp $ + * + * CTC / ESCON network driver + * + * Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation + * Author(s): Fritz Elfert (elfert@de.ibm.com, felfert@millenux.com) + Peter Tiedemann (ptiedem@de.ibm.com) + * + * + * Documentation used: + * - Principles of Operation (IBM doc#: SA22-7201-06) + * - Common IO/-Device Commands and Self Description (IBM doc#: SA22-7204-02) + * - Common IO/-Device Commands and Self Description (IBM doc#: SN22-5535) + * - ESCON Channel-to-Channel Adapter (IBM doc#: SA22-7203-00) + * - ESCON I/O Interface (IBM doc#: SA22-7202-029 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * RELEASE-TAG: CTC/ESCON network driver $Revision: 1.4 $ + * + */ + +#ifndef _CTCMAIN_H_ +#define _CTCMAIN_H_ + +#include <asm/ccwdev.h> +#include <asm/ccwgroup.h> + +#include "ctctty.h" +#include "fsm.h" +#include "cu3088.h" + + +/** + * CCW commands, used in this driver. + */ +#define CCW_CMD_WRITE 0x01 +#define CCW_CMD_READ 0x02 +#define CCW_CMD_SET_EXTENDED 0xc3 +#define CCW_CMD_PREPARE 0xe3 + +#define CTC_PROTO_S390 0 +#define CTC_PROTO_LINUX 1 +#define CTC_PROTO_LINUX_TTY 2 +#define CTC_PROTO_OS390 3 +#define CTC_PROTO_MAX 3 + +#define CTC_BUFSIZE_LIMIT 65535 +#define CTC_BUFSIZE_DEFAULT 32768 + +#define CTC_TIMEOUT_5SEC 5000 + +#define CTC_INITIAL_BLOCKLEN 2 + +#define READ 0 +#define WRITE 1 + +#define CTC_ID_SIZE BUS_ID_SIZE+3 + + +struct ctc_profile { + unsigned long maxmulti; + unsigned long maxcqueue; + unsigned long doios_single; + unsigned long doios_multi; + unsigned long txlen; + unsigned long tx_time; + struct timespec send_stamp; +}; + +/** + * Definition of one channel + */ +struct channel { + + /** + * Pointer to next channel in list. + */ + struct channel *next; + char id[CTC_ID_SIZE]; + struct ccw_device *cdev; + + /** + * Type of this channel. + * CTC/A or Escon for valid channels. + */ + enum channel_types type; + + /** + * Misc. flags. See CHANNEL_FLAGS_... below + */ + __u32 flags; + + /** + * The protocol of this channel + */ + __u16 protocol; + + /** + * I/O and irq related stuff + */ + struct ccw1 *ccw; + struct irb *irb; + + /** + * RX/TX buffer size + */ + int max_bufsize; + + /** + * Transmit/Receive buffer. + */ + struct sk_buff *trans_skb; + + /** + * Universal I/O queue. + */ + struct sk_buff_head io_queue; + + /** + * TX queue for collecting skb's during busy. + */ + struct sk_buff_head collect_queue; + + /** + * Amount of data in collect_queue. + */ + int collect_len; + + /** + * spinlock for collect_queue and collect_len + */ + spinlock_t collect_lock; + + /** + * Timer for detecting unresposive + * I/O operations. + */ + fsm_timer timer; + + /** + * Retry counter for misc. operations. + */ + int retry; + + /** + * The finite state machine of this channel + */ + fsm_instance *fsm; + + /** + * The corresponding net_device this channel + * belongs to. + */ + struct net_device *netdev; + + struct ctc_profile prof; + + unsigned char *trans_skb_data; + + __u16 logflags; +}; + +#define CHANNEL_FLAGS_READ 0 +#define CHANNEL_FLAGS_WRITE 1 +#define CHANNEL_FLAGS_INUSE 2 +#define CHANNEL_FLAGS_BUFSIZE_CHANGED 4 +#define CHANNEL_FLAGS_FAILED 8 +#define CHANNEL_FLAGS_WAITIRQ 16 +#define CHANNEL_FLAGS_RWMASK 1 +#define CHANNEL_DIRECTION(f) (f & CHANNEL_FLAGS_RWMASK) + +#define LOG_FLAG_ILLEGALPKT 1 +#define LOG_FLAG_ILLEGALSIZE 2 +#define LOG_FLAG_OVERRUN 4 +#define LOG_FLAG_NOMEM 8 + +#define CTC_LOGLEVEL_INFO 1 +#define CTC_LOGLEVEL_NOTICE 2 +#define CTC_LOGLEVEL_WARN 4 +#define CTC_LOGLEVEL_EMERG 8 +#define CTC_LOGLEVEL_ERR 16 +#define CTC_LOGLEVEL_DEBUG 32 +#define CTC_LOGLEVEL_CRIT 64 + +#define CTC_LOGLEVEL_DEFAULT \ +(CTC_LOGLEVEL_INFO | CTC_LOGLEVEL_NOTICE | CTC_LOGLEVEL_WARN | CTC_LOGLEVEL_CRIT) + +#define CTC_LOGLEVEL_MAX ((CTC_LOGLEVEL_CRIT<<1)-1) + +#define ctc_pr_debug(fmt, arg...) \ +do { if (loglevel & CTC_LOGLEVEL_DEBUG) printk(KERN_DEBUG fmt,##arg); } while (0) + +#define ctc_pr_info(fmt, arg...) \ +do { if (loglevel & CTC_LOGLEVEL_INFO) printk(KERN_INFO fmt,##arg); } while (0) + +#define ctc_pr_notice(fmt, arg...) \ +do { if (loglevel & CTC_LOGLEVEL_NOTICE) printk(KERN_NOTICE fmt,##arg); } while (0) + +#define ctc_pr_warn(fmt, arg...) \ +do { if (loglevel & CTC_LOGLEVEL_WARN) printk(KERN_WARNING fmt,##arg); } while (0) + +#define ctc_pr_emerg(fmt, arg...) \ +do { if (loglevel & CTC_LOGLEVEL_EMERG) printk(KERN_EMERG fmt,##arg); } while (0) + +#define ctc_pr_err(fmt, arg...) \ +do { if (loglevel & CTC_LOGLEVEL_ERR) printk(KERN_ERR fmt,##arg); } while (0) + +#define ctc_pr_crit(fmt, arg...) \ +do { if (loglevel & CTC_LOGLEVEL_CRIT) printk(KERN_CRIT fmt,##arg); } while (0) + +struct ctc_priv { + struct net_device_stats stats; + unsigned long tbusy; + /** + * The finite state machine of this interface. + */ + fsm_instance *fsm; + /** + * The protocol of this device + */ + __u16 protocol; + /** + * Timer for restarting after I/O Errors + */ + fsm_timer restart_timer; + + int buffer_size; + + struct channel *channel[2]; +}; + +/** + * Definition of our link level header. + */ +struct ll_header { + __u16 length; + __u16 type; + __u16 unused; +}; +#define LL_HEADER_LENGTH (sizeof(struct ll_header)) + +/** + * Compatibility macros for busy handling + * of network devices. + */ +static __inline__ void +ctc_clear_busy(struct net_device * dev) +{ + clear_bit(0, &(((struct ctc_priv *) dev->priv)->tbusy)); + if (((struct ctc_priv *)dev->priv)->protocol != CTC_PROTO_LINUX_TTY) + netif_wake_queue(dev); +} + +static __inline__ int +ctc_test_and_set_busy(struct net_device * dev) +{ + if (((struct ctc_priv *)dev->priv)->protocol != CTC_PROTO_LINUX_TTY) + netif_stop_queue(dev); + return test_and_set_bit(0, &((struct ctc_priv *) dev->priv)->tbusy); +} + +#endif diff --git a/drivers/s390/net/ctctty.c b/drivers/s390/net/ctctty.c index 9257d60c783..3080393e823 100644 --- a/drivers/s390/net/ctctty.c +++ b/drivers/s390/net/ctctty.c @@ -1,5 +1,5 @@ /* - * $Id: ctctty.c,v 1.26 2004/08/04 11:06:55 mschwide Exp $ + * $Id: ctctty.c,v 1.29 2005/04/05 08:50:44 mschwide Exp $ * * CTC / ESCON network driver, tty interface. * @@ -1056,8 +1056,7 @@ ctc_tty_close(struct tty_struct *tty, struct file *filp) info->tty = 0; tty->closing = 0; if (info->blocked_open) { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(HZ/2); + msleep_interruptible(500); wake_up_interruptible(&info->open_wait); } info->flags &= ~(CTC_ASYNC_NORMAL_ACTIVE | CTC_ASYNC_CLOSING); diff --git a/drivers/s390/net/cu3088.c b/drivers/s390/net/cu3088.c index 1b0a9f16024..0075894c71d 100644 --- a/drivers/s390/net/cu3088.c +++ b/drivers/s390/net/cu3088.c @@ -1,5 +1,5 @@ /* - * $Id: cu3088.c,v 1.34 2004/06/15 13:16:27 pavlic Exp $ + * $Id: cu3088.c,v 1.35 2005/03/30 19:28:52 richtera Exp $ * * CTC / LCS ccw_device driver * @@ -39,6 +39,7 @@ const char *cu3088_type[] = { "FICON channel", "P390 LCS card", "OSA LCS card", + "CLAW channel device", "unknown channel type", "unsupported channel type", }; @@ -51,6 +52,7 @@ static struct ccw_device_id cu3088_ids[] = { { CCW_DEVICE(0x3088, 0x1e), .driver_info = channel_type_ficon }, { CCW_DEVICE(0x3088, 0x01), .driver_info = channel_type_p390 }, { CCW_DEVICE(0x3088, 0x60), .driver_info = channel_type_osa2 }, + { CCW_DEVICE(0x3088, 0x61), .driver_info = channel_type_claw }, { /* end of list */ } }; diff --git a/drivers/s390/net/cu3088.h b/drivers/s390/net/cu3088.h index 0ec49a8b3ad..1753661f702 100644 --- a/drivers/s390/net/cu3088.h +++ b/drivers/s390/net/cu3088.h @@ -23,6 +23,9 @@ enum channel_types { /* Device is a OSA2 card */ channel_type_osa2, + /* Device is a CLAW channel device */ + channel_type_claw, + /* Device is a channel, but we don't know * anything about it */ channel_type_unknown, diff --git a/drivers/s390/net/iucv.c b/drivers/s390/net/iucv.c index 1ac6563ee3e..e08e74e1612 100644 --- a/drivers/s390/net/iucv.c +++ b/drivers/s390/net/iucv.c @@ -1,5 +1,5 @@ /* - * $Id: iucv.c,v 1.43 2005/02/09 14:47:43 braunu Exp $ + * $Id: iucv.c,v 1.45 2005/04/26 22:59:06 braunu Exp $ * * IUCV network driver * @@ -29,7 +29,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * RELEASE-TAG: IUCV lowlevel driver $Revision: 1.43 $ + * RELEASE-TAG: IUCV lowlevel driver $Revision: 1.45 $ * */ @@ -355,7 +355,7 @@ do { \ static void iucv_banner(void) { - char vbuf[] = "$Revision: 1.43 $"; + char vbuf[] = "$Revision: 1.45 $"; char *version = vbuf; if ((version = strchr(version, ':'))) { @@ -2553,12 +2553,12 @@ EXPORT_SYMBOL (iucv_resume); #endif EXPORT_SYMBOL (iucv_reply_prmmsg); EXPORT_SYMBOL (iucv_send); -#if 0 EXPORT_SYMBOL (iucv_send2way); EXPORT_SYMBOL (iucv_send2way_array); -EXPORT_SYMBOL (iucv_send_array); EXPORT_SYMBOL (iucv_send2way_prmmsg); EXPORT_SYMBOL (iucv_send2way_prmmsg_array); +#if 0 +EXPORT_SYMBOL (iucv_send_array); EXPORT_SYMBOL (iucv_send_prmmsg); EXPORT_SYMBOL (iucv_setmask); #endif diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c index 0f76e945b98..cccfed248e7 100644 --- a/drivers/s390/net/lcs.c +++ b/drivers/s390/net/lcs.c @@ -11,7 +11,7 @@ * Frank Pavlic (pavlic@de.ibm.com) and * Martin Schwidefsky <schwidefsky@de.ibm.com> * - * $Revision: 1.96 $ $Date: 2004/11/11 13:42:33 $ + * $Revision: 1.98 $ $Date: 2005/04/18 13:41:29 $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -59,7 +59,7 @@ /** * initialization string for output */ -#define VERSION_LCS_C "$Revision: 1.96 $" +#define VERSION_LCS_C "$Revision: 1.98 $" static char version[] __initdata = "LCS driver ("VERSION_LCS_C "/" VERSION_LCS_H ")"; static char debug_buffer[255]; @@ -1098,14 +1098,6 @@ lcs_check_multicast_support(struct lcs_card *card) PRINT_ERR("Query IPAssist failed. Assuming unsupported!\n"); return -EOPNOTSUPP; } - /* Print out supported assists: IPv6 */ - PRINT_INFO("LCS device %s %s IPv6 support\n", card->dev->name, - (card->ip_assists_supported & LCS_IPASS_IPV6_SUPPORT) ? - "with" : "without"); - /* Print out supported assist: Multicast */ - PRINT_INFO("LCS device %s %s Multicast support\n", card->dev->name, - (card->ip_assists_supported & LCS_IPASS_MULTICAST_SUPPORT) ? - "with" : "without"); if (card->ip_assists_supported & LCS_IPASS_MULTICAST_SUPPORT) return 0; return -EOPNOTSUPP; @@ -1160,7 +1152,7 @@ list_modified: } } /* re-insert all entries from the failed_list into ipm_list */ - list_for_each_entry(ipm, &failed_list, list) { + list_for_each_entry_safe(ipm, tmp, &failed_list, list) { list_del_init(&ipm->list); list_add_tail(&ipm->list, &card->ipm_list); } @@ -2198,30 +2190,39 @@ lcs_new_device(struct ccwgroup_device *ccwgdev) if (!dev) goto out; card->dev = dev; -netdev_out: card->dev->priv = card; card->dev->open = lcs_open_device; card->dev->stop = lcs_stop_device; card->dev->hard_start_xmit = lcs_start_xmit; card->dev->get_stats = lcs_getstats; SET_MODULE_OWNER(dev); - if (lcs_register_netdev(ccwgdev) != 0) - goto out; memcpy(card->dev->dev_addr, card->mac, LCS_MAC_LENGTH); #ifdef CONFIG_IP_MULTICAST if (!lcs_check_multicast_support(card)) card->dev->set_multicast_list = lcs_set_multicast_list; #endif - netif_stop_queue(card->dev); +netdev_out: lcs_set_allowed_threads(card,0xffffffff); if (recover_state == DEV_STATE_RECOVER) { lcs_set_multicast_list(card->dev); card->dev->flags |= IFF_UP; netif_wake_queue(card->dev); card->state = DEV_STATE_UP; - } else + } else { lcs_stopcard(card); + } + if (lcs_register_netdev(ccwgdev) != 0) + goto out; + + /* Print out supported assists: IPv6 */ + PRINT_INFO("LCS device %s %s IPv6 support\n", card->dev->name, + (card->ip_assists_supported & LCS_IPASS_IPV6_SUPPORT) ? + "with" : "without"); + /* Print out supported assist: Multicast */ + PRINT_INFO("LCS device %s %s Multicast support\n", card->dev->name, + (card->ip_assists_supported & LCS_IPASS_MULTICAST_SUPPORT) ? + "with" : "without"); return 0; out: diff --git a/drivers/s390/net/qeth.h b/drivers/s390/net/qeth.h index a341041a6cf..a755b57db46 100644 --- a/drivers/s390/net/qeth.h +++ b/drivers/s390/net/qeth.h @@ -24,7 +24,7 @@ #include "qeth_mpc.h" -#define VERSION_QETH_H "$Revision: 1.135 $" +#define VERSION_QETH_H "$Revision: 1.139 $" #ifdef CONFIG_QETH_IPV6 #define QETH_VERSION_IPV6 ":IPv6" @@ -288,7 +288,8 @@ qeth_is_ipa_enabled(struct qeth_ipa_info *ipa, enum qeth_ipa_funcs func) #define QETH_TX_TIMEOUT 100 * HZ #define QETH_HEADER_SIZE 32 #define MAX_PORTNO 15 -#define QETH_FAKE_LL_LEN ETH_HLEN +#define QETH_FAKE_LL_LEN_ETH ETH_HLEN +#define QETH_FAKE_LL_LEN_TR (sizeof(struct trh_hdr)-TR_MAXRIFLEN+sizeof(struct trllc)) #define QETH_FAKE_LL_V6_ADDR_POS 24 /*IPv6 address autoconfiguration stuff*/ @@ -369,6 +370,25 @@ struct qeth_hdr { } hdr; } __attribute__ ((packed)); +/*TCP Segmentation Offload header*/ +struct qeth_hdr_ext_tso { + __u16 hdr_tot_len; + __u8 imb_hdr_no; + __u8 reserved; + __u8 hdr_type; + __u8 hdr_version; + __u16 hdr_len; + __u32 payload_len; + __u16 mss; + __u16 dg_hdr_len; + __u8 padding[16]; +} __attribute__ ((packed)); + +struct qeth_hdr_tso { + struct qeth_hdr hdr; /*hdr->hdr.l3.xxx*/ + struct qeth_hdr_ext_tso ext; +} __attribute__ ((packed)); + /* flags for qeth_hdr.flags */ #define QETH_HDR_PASSTHRU 0x10 @@ -866,6 +886,7 @@ qeth_push_skb(struct qeth_card *card, struct sk_buff **skb, int size) return hdr; } + inline static int qeth_get_hlen(__u8 link_type) { @@ -873,19 +894,19 @@ qeth_get_hlen(__u8 link_type) switch (link_type) { case QETH_LINK_TYPE_HSTR: case QETH_LINK_TYPE_LANE_TR: - return sizeof(struct qeth_hdr) + TR_HLEN; + return sizeof(struct qeth_hdr_tso) + TR_HLEN; default: #ifdef CONFIG_QETH_VLAN - return sizeof(struct qeth_hdr) + VLAN_ETH_HLEN; + return sizeof(struct qeth_hdr_tso) + VLAN_ETH_HLEN; #else - return sizeof(struct qeth_hdr) + ETH_HLEN; + return sizeof(struct qeth_hdr_tso) + ETH_HLEN; #endif } #else /* CONFIG_QETH_IPV6 */ #ifdef CONFIG_QETH_VLAN - return sizeof(struct qeth_hdr) + VLAN_HLEN; + return sizeof(struct qeth_hdr_tso) + VLAN_HLEN; #else - return sizeof(struct qeth_hdr); + return sizeof(struct qeth_hdr_tso); #endif #endif /* CONFIG_QETH_IPV6 */ } diff --git a/drivers/s390/net/qeth_eddp.c b/drivers/s390/net/qeth_eddp.c index 7ee1c06ed68..f94f1f25eec 100644 --- a/drivers/s390/net/qeth_eddp.c +++ b/drivers/s390/net/qeth_eddp.c @@ -1,6 +1,6 @@ /* * - * linux/drivers/s390/net/qeth_eddp.c ($Revision: 1.11 $) + * linux/drivers/s390/net/qeth_eddp.c ($Revision: 1.13 $) * * Enhanced Device Driver Packing (EDDP) support for the qeth driver. * @@ -8,7 +8,7 @@ * * Author(s): Thomas Spatzier <tspat@de.ibm.com> * - * $Revision: 1.11 $ $Date: 2005/03/24 09:04:18 $ + * $Revision: 1.13 $ $Date: 2005/05/04 20:19:18 $ * */ #include <linux/config.h> @@ -85,7 +85,7 @@ void qeth_eddp_buf_release_contexts(struct qeth_qdio_out_buffer *buf) { struct qeth_eddp_context_reference *ref; - + QETH_DBF_TEXT(trace, 6, "eddprctx"); while (!list_empty(&buf->ctx_list)){ ref = list_entry(buf->ctx_list.next, @@ -139,7 +139,7 @@ qeth_eddp_fill_buffer(struct qeth_qdio_out_q *queue, "buffer!\n"); goto out; } - } + } /* check if the whole next skb fits into current buffer */ if ((QETH_MAX_BUFFER_ELEMENTS(queue->card) - buf->next_element_to_fill) @@ -152,7 +152,7 @@ qeth_eddp_fill_buffer(struct qeth_qdio_out_q *queue, * and increment ctx's refcnt */ must_refcnt = 1; continue; - } + } if (must_refcnt){ must_refcnt = 0; if (qeth_eddp_buf_ref_context(buf, ctx)){ @@ -202,40 +202,29 @@ out: return flush_cnt; } -static inline int -qeth_get_skb_data_len(struct sk_buff *skb) -{ - int len = skb->len; - int i; - - for (i = 0; i < skb_shinfo(skb)->nr_frags; ++i) - len -= skb_shinfo(skb)->frags[i].size; - return len; -} - static inline void qeth_eddp_create_segment_hdrs(struct qeth_eddp_context *ctx, - struct qeth_eddp_data *eddp) + struct qeth_eddp_data *eddp, int data_len) { u8 *page; int page_remainder; int page_offset; - int hdr_len; + int pkt_len; struct qeth_eddp_element *element; QETH_DBF_TEXT(trace, 5, "eddpcrsh"); page = ctx->pages[ctx->offset >> PAGE_SHIFT]; page_offset = ctx->offset % PAGE_SIZE; element = &ctx->elements[ctx->num_elements]; - hdr_len = eddp->nhl + eddp->thl; + pkt_len = eddp->nhl + eddp->thl + data_len; /* FIXME: layer2 and VLAN !!! */ if (eddp->qh.hdr.l2.id == QETH_HEADER_TYPE_LAYER2) - hdr_len += ETH_HLEN; + pkt_len += ETH_HLEN; if (eddp->mac.h_proto == __constant_htons(ETH_P_8021Q)) - hdr_len += VLAN_HLEN; - /* does complete header fit in current page ? */ + pkt_len += VLAN_HLEN; + /* does complete packet fit in current page ? */ page_remainder = PAGE_SIZE - page_offset; - if (page_remainder < (sizeof(struct qeth_hdr) + hdr_len)){ + if (page_remainder < (sizeof(struct qeth_hdr) + pkt_len)){ /* no -> go to start of next page */ ctx->offset += page_remainder; page = ctx->pages[ctx->offset >> PAGE_SHIFT]; @@ -281,7 +270,7 @@ qeth_eddp_copy_data_tcp(char *dst, struct qeth_eddp_data *eddp, int len, int left_in_frag; int copy_len; u8 *src; - + QETH_DBF_TEXT(trace, 5, "eddpcdtc"); if (skb_shinfo(eddp->skb)->nr_frags == 0) { memcpy(dst, eddp->skb->data + eddp->skb_offset, len); @@ -292,7 +281,7 @@ qeth_eddp_copy_data_tcp(char *dst, struct qeth_eddp_data *eddp, int len, while (len > 0) { if (eddp->frag < 0) { /* we're in skb->data */ - left_in_frag = qeth_get_skb_data_len(eddp->skb) + left_in_frag = (eddp->skb->len - eddp->skb->data_len) - eddp->skb_offset; src = eddp->skb->data + eddp->skb_offset; } else { @@ -424,7 +413,7 @@ __qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx, struct tcphdr *tcph; int data_len; u32 hcsum; - + QETH_DBF_TEXT(trace, 5, "eddpftcp"); eddp->skb_offset = sizeof(struct qeth_hdr) + eddp->nhl + eddp->thl; tcph = eddp->skb->h.th; @@ -464,7 +453,7 @@ __qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx, else hcsum = qeth_eddp_check_tcp6_hdr(eddp, data_len); /* fill the next segment into the context */ - qeth_eddp_create_segment_hdrs(ctx, eddp); + qeth_eddp_create_segment_hdrs(ctx, eddp, data_len); qeth_eddp_create_segment_data_tcp(ctx, eddp, data_len, hcsum); if (eddp->skb_offset >= eddp->skb->len) break; @@ -474,13 +463,13 @@ __qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx, eddp->th.tcp.h.seq += data_len; } } - + static inline int qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx, struct sk_buff *skb, struct qeth_hdr *qhdr) { struct qeth_eddp_data *eddp = NULL; - + QETH_DBF_TEXT(trace, 5, "eddpficx"); /* create our segmentation headers and copy original headers */ if (skb->protocol == ETH_P_IP) @@ -520,7 +509,7 @@ qeth_eddp_calc_num_pages(struct qeth_eddp_context *ctx, struct sk_buff *skb, int hdr_len) { int skbs_per_page; - + QETH_DBF_TEXT(trace, 5, "eddpcanp"); /* can we put multiple skbs in one page? */ skbs_per_page = PAGE_SIZE / (skb_shinfo(skb)->tso_size + hdr_len); @@ -600,7 +589,7 @@ qeth_eddp_create_context_tcp(struct qeth_card *card, struct sk_buff *skb, struct qeth_hdr *qhdr) { struct qeth_eddp_context *ctx = NULL; - + QETH_DBF_TEXT(trace, 5, "creddpct"); if (skb->protocol == ETH_P_IP) ctx = qeth_eddp_create_context_generic(card, skb, diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c index 607b92542df..208127a5033 100644 --- a/drivers/s390/net/qeth_main.c +++ b/drivers/s390/net/qeth_main.c @@ -1,6 +1,6 @@ /* * - * linux/drivers/s390/net/qeth_main.c ($Revision: 1.206 $) + * linux/drivers/s390/net/qeth_main.c ($Revision: 1.214 $) * * Linux on zSeries OSA Express and HiperSockets support * @@ -12,7 +12,7 @@ * Frank Pavlic (pavlic@de.ibm.com) and * Thomas Spatzier <tspat@de.ibm.com> * - * $Revision: 1.206 $ $Date: 2005/03/24 09:04:18 $ + * $Revision: 1.214 $ $Date: 2005/05/04 20:19:18 $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -80,7 +80,7 @@ qeth_eyecatcher(void) #include "qeth_eddp.h" #include "qeth_tso.h" -#define VERSION_QETH_C "$Revision: 1.206 $" +#define VERSION_QETH_C "$Revision: 1.214 $" static const char *version = "qeth S/390 OSA-Express driver"; /** @@ -158,6 +158,9 @@ qeth_irq_tasklet(unsigned long); static int qeth_set_online(struct ccwgroup_device *); +static int +__qeth_set_online(struct ccwgroup_device *gdev, int recovery_mode); + static struct qeth_ipaddr * qeth_get_addr_buffer(enum qeth_prot_versions); @@ -510,10 +513,10 @@ qeth_irq_tasklet(unsigned long data) wake_up(&card->wait_q); } -static int qeth_stop_card(struct qeth_card *); +static int qeth_stop_card(struct qeth_card *, int); static int -qeth_set_offline(struct ccwgroup_device *cgdev) +__qeth_set_offline(struct ccwgroup_device *cgdev, int recovery_mode) { struct qeth_card *card = (struct qeth_card *) cgdev->dev.driver_data; int rc = 0; @@ -523,7 +526,7 @@ qeth_set_offline(struct ccwgroup_device *cgdev) QETH_DBF_HEX(setup, 3, &card, sizeof(void *)); recover_flag = card->state; - if (qeth_stop_card(card) == -ERESTARTSYS){ + if (qeth_stop_card(card, recovery_mode) == -ERESTARTSYS){ PRINT_WARN("Stopping card %s interrupted by user!\n", CARD_BUS_ID(card)); return -ERESTARTSYS; @@ -540,6 +543,12 @@ qeth_set_offline(struct ccwgroup_device *cgdev) } static int +qeth_set_offline(struct ccwgroup_device *cgdev) +{ + return __qeth_set_offline(cgdev, 0); +} + +static int qeth_wait_for_threads(struct qeth_card *card, unsigned long threads); @@ -953,8 +962,8 @@ qeth_recover(void *ptr) PRINT_WARN("Recovery of device %s started ...\n", CARD_BUS_ID(card)); card->use_hard_stop = 1; - qeth_set_offline(card->gdev); - rc = qeth_set_online(card->gdev); + __qeth_set_offline(card->gdev,1); + rc = __qeth_set_online(card->gdev,1); if (!rc) PRINT_INFO("Device %s successfully recovered!\n", CARD_BUS_ID(card)); @@ -2152,9 +2161,15 @@ qeth_get_next_skb(struct qeth_card *card, struct qdio_buffer *buffer, if (!skb_len) return NULL; if (card->options.fake_ll){ - if (!(skb = qeth_get_skb(skb_len + QETH_FAKE_LL_LEN))) - goto no_mem; - skb_pull(skb, QETH_FAKE_LL_LEN); + if(card->dev->type == ARPHRD_IEEE802_TR){ + if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_TR))) + goto no_mem; + skb_reserve(skb,QETH_FAKE_LL_LEN_TR); + } else { + if (!(skb = qeth_get_skb(skb_len+QETH_FAKE_LL_LEN_ETH))) + goto no_mem; + skb_reserve(skb,QETH_FAKE_LL_LEN_ETH); + } } else if (!(skb = qeth_get_skb(skb_len))) goto no_mem; data_ptr = element->addr + offset; @@ -2229,14 +2244,68 @@ qeth_type_trans(struct sk_buff *skb, struct net_device *dev) } static inline void -qeth_rebuild_skb_fake_ll(struct qeth_card *card, struct sk_buff *skb, +qeth_rebuild_skb_fake_ll_tr(struct qeth_card *card, struct sk_buff *skb, + struct qeth_hdr *hdr) +{ + struct trh_hdr *fake_hdr; + struct trllc *fake_llc; + struct iphdr *ip_hdr; + + QETH_DBF_TEXT(trace,5,"skbfktr"); + skb->mac.raw = skb->data - QETH_FAKE_LL_LEN_TR; + /* this is a fake ethernet header */ + fake_hdr = (struct trh_hdr *) skb->mac.raw; + + /* the destination MAC address */ + switch (skb->pkt_type){ + case PACKET_MULTICAST: + switch (skb->protocol){ +#ifdef CONFIG_QETH_IPV6 + case __constant_htons(ETH_P_IPV6): + ndisc_mc_map((struct in6_addr *) + skb->data + QETH_FAKE_LL_V6_ADDR_POS, + fake_hdr->daddr, card->dev, 0); + break; +#endif /* CONFIG_QETH_IPV6 */ + case __constant_htons(ETH_P_IP): + ip_hdr = (struct iphdr *)skb->data; + ip_tr_mc_map(ip_hdr->daddr, fake_hdr->daddr); + break; + default: + memcpy(fake_hdr->daddr, card->dev->dev_addr, TR_ALEN); + } + break; + case PACKET_BROADCAST: + memset(fake_hdr->daddr, 0xff, TR_ALEN); + break; + default: + memcpy(fake_hdr->daddr, card->dev->dev_addr, TR_ALEN); + } + /* the source MAC address */ + if (hdr->hdr.l3.ext_flags & QETH_HDR_EXT_SRC_MAC_ADDR) + memcpy(fake_hdr->saddr, &hdr->hdr.l3.dest_addr[2], TR_ALEN); + else + memset(fake_hdr->saddr, 0, TR_ALEN); + fake_hdr->rcf=0; + fake_llc = (struct trllc*)&(fake_hdr->rcf); + fake_llc->dsap = EXTENDED_SAP; + fake_llc->ssap = EXTENDED_SAP; + fake_llc->llc = UI_CMD; + fake_llc->protid[0] = 0; + fake_llc->protid[1] = 0; + fake_llc->protid[2] = 0; + fake_llc->ethertype = ETH_P_IP; +} + +static inline void +qeth_rebuild_skb_fake_ll_eth(struct qeth_card *card, struct sk_buff *skb, struct qeth_hdr *hdr) { struct ethhdr *fake_hdr; struct iphdr *ip_hdr; - QETH_DBF_TEXT(trace,5,"skbfake"); - skb->mac.raw = skb->data - QETH_FAKE_LL_LEN; + QETH_DBF_TEXT(trace,5,"skbfketh"); + skb->mac.raw = skb->data - QETH_FAKE_LL_LEN_ETH; /* this is a fake ethernet header */ fake_hdr = (struct ethhdr *) skb->mac.raw; @@ -2253,10 +2322,7 @@ qeth_rebuild_skb_fake_ll(struct qeth_card *card, struct sk_buff *skb, #endif /* CONFIG_QETH_IPV6 */ case __constant_htons(ETH_P_IP): ip_hdr = (struct iphdr *)skb->data; - if (card->dev->type == ARPHRD_IEEE802_TR) - ip_tr_mc_map(ip_hdr->daddr, fake_hdr->h_dest); - else - ip_eth_mc_map(ip_hdr->daddr, fake_hdr->h_dest); + ip_eth_mc_map(ip_hdr->daddr, fake_hdr->h_dest); break; default: memcpy(fake_hdr->h_dest, card->dev->dev_addr, ETH_ALEN); @@ -2278,6 +2344,16 @@ qeth_rebuild_skb_fake_ll(struct qeth_card *card, struct sk_buff *skb, } static inline void +qeth_rebuild_skb_fake_ll(struct qeth_card *card, struct sk_buff *skb, + struct qeth_hdr *hdr) +{ + if (card->dev->type == ARPHRD_IEEE802_TR) + qeth_rebuild_skb_fake_ll_tr(card, skb, hdr); + else + qeth_rebuild_skb_fake_ll_eth(card, skb, hdr); +} + +static inline void qeth_rebuild_skb_vlan(struct qeth_card *card, struct sk_buff *skb, struct qeth_hdr *hdr) { @@ -3440,16 +3516,25 @@ qeth_fake_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, void *daddr, void *saddr, unsigned len) { - struct ethhdr *hdr; + if(dev->type == ARPHRD_IEEE802_TR){ + struct trh_hdr *hdr; + hdr = (struct trh_hdr *)skb_push(skb, QETH_FAKE_LL_LEN_TR); + memcpy(hdr->saddr, dev->dev_addr, TR_ALEN); + memcpy(hdr->daddr, "FAKELL", TR_ALEN); + return QETH_FAKE_LL_LEN_TR; + + } else { + struct ethhdr *hdr; + hdr = (struct ethhdr *)skb_push(skb, QETH_FAKE_LL_LEN_ETH); + memcpy(hdr->h_source, dev->dev_addr, ETH_ALEN); + memcpy(hdr->h_dest, "FAKELL", ETH_ALEN); + if (type != ETH_P_802_3) + hdr->h_proto = htons(type); + else + hdr->h_proto = htons(len); + return QETH_FAKE_LL_LEN_ETH; - hdr = (struct ethhdr *)skb_push(skb, QETH_FAKE_LL_LEN); - memcpy(hdr->h_source, dev->dev_addr, ETH_ALEN); - memcpy(hdr->h_dest, "FAKELL", ETH_ALEN); - if (type != ETH_P_802_3) - hdr->h_proto = htons(type); - else - hdr->h_proto = htons(len); - return QETH_FAKE_LL_LEN; + } } static inline int @@ -3710,16 +3795,12 @@ static inline int qeth_prepare_skb(struct qeth_card *card, struct sk_buff **skb, struct qeth_hdr **hdr, int ipv) { - int rc = 0; #ifdef CONFIG_QETH_VLAN u16 *tag; #endif QETH_DBF_TEXT(trace, 6, "prepskb"); - rc = qeth_realloc_headroom(card, skb, sizeof(struct qeth_hdr)); - if (rc) - return rc; #ifdef CONFIG_QETH_VLAN if (card->vlangrp && vlan_tx_tag_present(*skb) && ((ipv == 6) || card->options.layer2) ) { @@ -3882,9 +3963,15 @@ qeth_fill_header(struct qeth_card *card, struct qeth_hdr *hdr, memcpy(hdr->hdr.l3.dest_addr, &skb->nh.ipv6h->daddr, 16); } } else { /* passthrough */ - if (!memcmp(skb->data + sizeof(struct qeth_hdr), + if((skb->dev->type == ARPHRD_IEEE802_TR) && + !memcmp(skb->data + sizeof(struct qeth_hdr) + + sizeof(__u16), skb->dev->broadcast, 6)) { + hdr->hdr.l3.flags = QETH_CAST_BROADCAST | + QETH_HDR_PASSTHRU; + } else if (!memcmp(skb->data + sizeof(struct qeth_hdr), skb->dev->broadcast, 6)) { /* broadcast? */ - hdr->hdr.l3.flags = QETH_CAST_BROADCAST | QETH_HDR_PASSTHRU; + hdr->hdr.l3.flags = QETH_CAST_BROADCAST | + QETH_HDR_PASSTHRU; } else { hdr->hdr.l3.flags = (cast_type == RTN_MULTICAST) ? QETH_CAST_MULTICAST | QETH_HDR_PASSTHRU : @@ -3894,67 +3981,29 @@ qeth_fill_header(struct qeth_card *card, struct qeth_hdr *hdr, } static inline void -__qeth_fill_buffer_frag(struct sk_buff *skb, struct qdio_buffer *buffer, - int *next_element_to_fill) -{ - int length = skb->len; - struct skb_frag_struct *frag; - int fragno; - unsigned long addr; - int element; - int first_lap = 1; - - fragno = skb_shinfo(skb)->nr_frags; /* start with last frag */ - element = *next_element_to_fill + fragno; - while (length > 0) { - if (fragno > 0) { - frag = &skb_shinfo(skb)->frags[fragno - 1]; - addr = (page_to_pfn(frag->page) << PAGE_SHIFT) + - frag->page_offset; - buffer->element[element].addr = (char *)addr; - buffer->element[element].length = frag->size; - length -= frag->size; - if (first_lap) - buffer->element[element].flags = - SBAL_FLAGS_LAST_FRAG; - else - buffer->element[element].flags = - SBAL_FLAGS_MIDDLE_FRAG; - } else { - buffer->element[element].addr = skb->data; - buffer->element[element].length = length; - length = 0; - buffer->element[element].flags = - SBAL_FLAGS_FIRST_FRAG; - } - element--; - fragno--; - first_lap = 0; - } - *next_element_to_fill += skb_shinfo(skb)->nr_frags + 1; -} - -static inline void __qeth_fill_buffer(struct sk_buff *skb, struct qdio_buffer *buffer, - int *next_element_to_fill) + int is_tso, int *next_element_to_fill) { int length = skb->len; int length_here; int element; char *data; - int first_lap = 1; + int first_lap ; element = *next_element_to_fill; data = skb->data; + first_lap = (is_tso == 0 ? 1 : 0); + while (length > 0) { /* length_here is the remaining amount of data in this page */ length_here = PAGE_SIZE - ((unsigned long) data % PAGE_SIZE); if (length < length_here) length_here = length; + buffer->element[element].addr = data; buffer->element[element].length = length_here; length -= length_here; - if (!length){ + if (!length) { if (first_lap) buffer->element[element].flags = 0; else @@ -3981,17 +4030,35 @@ qeth_fill_buffer(struct qeth_qdio_out_q *queue, struct sk_buff *skb) { struct qdio_buffer *buffer; - int flush_cnt = 0; + struct qeth_hdr_tso *hdr; + int flush_cnt = 0, hdr_len, large_send = 0; QETH_DBF_TEXT(trace, 6, "qdfillbf"); + buffer = buf->buffer; atomic_inc(&skb->users); skb_queue_tail(&buf->skb_list, skb); + + hdr = (struct qeth_hdr_tso *) skb->data; + /*check first on TSO ....*/ + if (hdr->hdr.hdr.l3.id == QETH_HEADER_TYPE_TSO) { + int element = buf->next_element_to_fill; + + hdr_len = sizeof(struct qeth_hdr_tso) + hdr->ext.dg_hdr_len; + /*fill first buffer entry only with header information */ + buffer->element[element].addr = skb->data; + buffer->element[element].length = hdr_len; + buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG; + buf->next_element_to_fill++; + skb->data += hdr_len; + skb->len -= hdr_len; + large_send = 1; + } if (skb_shinfo(skb)->nr_frags == 0) - __qeth_fill_buffer(skb, buffer, + __qeth_fill_buffer(skb, buffer, large_send, (int *)&buf->next_element_to_fill); else - __qeth_fill_buffer_frag(skb, buffer, + __qeth_fill_buffer_frag(skb, buffer, large_send, (int *)&buf->next_element_to_fill); if (!queue->do_pack) { @@ -4184,6 +4251,25 @@ out: } static inline int +qeth_get_elements_no(struct qeth_card *card, void *hdr, struct sk_buff *skb) +{ + int elements_needed = 0; + + if (skb_shinfo(skb)->nr_frags > 0) { + elements_needed = (skb_shinfo(skb)->nr_frags + 1); + } + if (elements_needed == 0 ) + elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE) + + skb->len) >> PAGE_SHIFT); + if (elements_needed > QETH_MAX_BUFFER_ELEMENTS(card)){ + PRINT_ERR("qeth_do_send_packet: invalid size of " + "IP packet. Discarded."); + return 0; + } + return elements_needed; +} + +static inline int qeth_send_packet(struct qeth_card *card, struct sk_buff *skb) { int ipv = 0; @@ -4205,7 +4291,11 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb) dev_kfree_skb_irq(skb); return 0; } - skb_pull(skb, QETH_FAKE_LL_LEN); + if(card->dev->type == ARPHRD_IEEE802_TR){ + skb_pull(skb, QETH_FAKE_LL_LEN_TR); + } else { + skb_pull(skb, QETH_FAKE_LL_LEN_ETH); + } } } cast_type = qeth_get_cast_type(card, skb); @@ -4221,19 +4311,25 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb) if (skb_shinfo(skb)->tso_size) large_send = card->options.large_send; - if ((rc = qeth_prepare_skb(card, &skb, &hdr, ipv))){ - QETH_DBF_TEXT_(trace, 4, "pskbe%d", rc); - return rc; - } /*are we able to do TSO ? If so ,prepare and send it from here */ if ((large_send == QETH_LARGE_SEND_TSO) && (cast_type == RTN_UNSPEC)) { - rc = qeth_tso_send_packet(card, skb, queue, - ipv, cast_type); - goto do_statistics; + rc = qeth_tso_prepare_packet(card, skb, ipv, cast_type); + if (rc) { + card->stats.tx_dropped++; + card->stats.tx_errors++; + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + elements_needed++; + } else { + if ((rc = qeth_prepare_skb(card, &skb, &hdr, ipv))) { + QETH_DBF_TEXT_(trace, 4, "pskbe%d", rc); + return rc; + } + qeth_fill_header(card, hdr, skb, ipv, cast_type); } - qeth_fill_header(card, hdr, skb, ipv, cast_type); if (large_send == QETH_LARGE_SEND_EDDP) { ctx = qeth_eddp_create_context(card, skb, hdr); if (ctx == NULL) { @@ -4241,7 +4337,7 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb) return -EINVAL; } } else { - elements_needed = qeth_get_elements_no(card,(void*) hdr, skb); + elements_needed += qeth_get_elements_no(card,(void*) hdr, skb); if (!elements_needed) return -EINVAL; } @@ -4252,12 +4348,12 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb) else rc = qeth_do_send_packet_fast(card, queue, skb, hdr, elements_needed, ctx); -do_statistics: if (!rc){ card->stats.tx_packets++; card->stats.tx_bytes += skb->len; #ifdef CONFIG_QETH_PERF_STATS - if (skb_shinfo(skb)->tso_size) { + if (skb_shinfo(skb)->tso_size && + !(large_send == QETH_LARGE_SEND_NO)) { card->perf_stats.large_send_bytes += skb->len; card->perf_stats.large_send_cnt++; } @@ -7154,7 +7250,7 @@ qeth_wait_for_threads(struct qeth_card *card, unsigned long threads) } static int -qeth_stop_card(struct qeth_card *card) +qeth_stop_card(struct qeth_card *card, int recovery_mode) { int rc = 0; @@ -7167,9 +7263,13 @@ qeth_stop_card(struct qeth_card *card) if (card->read.state == CH_STATE_UP && card->write.state == CH_STATE_UP && (card->state == CARD_STATE_UP)) { - rtnl_lock(); - dev_close(card->dev); - rtnl_unlock(); + if(recovery_mode) { + qeth_stop(card->dev); + } else { + rtnl_lock(); + dev_close(card->dev); + rtnl_unlock(); + } if (!card->use_hard_stop) { __u8 *mac = &card->dev->dev_addr[0]; rc = qeth_layer2_send_delmac(card, mac); @@ -7341,13 +7441,17 @@ qeth_register_netdev(struct qeth_card *card) } static void -qeth_start_again(struct qeth_card *card) +qeth_start_again(struct qeth_card *card, int recovery_mode) { QETH_DBF_TEXT(setup ,2, "startag"); - rtnl_lock(); - dev_open(card->dev); - rtnl_unlock(); + if(recovery_mode) { + qeth_open(card->dev); + } else { + rtnl_lock(); + dev_open(card->dev); + rtnl_unlock(); + } /* this also sets saved unicast addresses */ qeth_set_multicast_list(card->dev); } @@ -7404,7 +7508,7 @@ static void qeth_make_parameters_consistent(struct qeth_card *card) static int -qeth_set_online(struct ccwgroup_device *gdev) +__qeth_set_online(struct ccwgroup_device *gdev, int recovery_mode) { struct qeth_card *card = gdev->dev.driver_data; int rc = 0; @@ -7464,12 +7568,12 @@ qeth_set_online(struct ccwgroup_device *gdev) * we can also use this state for recovery purposes*/ qeth_set_allowed_threads(card, 0xffffffff, 0); if (recover_flag == CARD_STATE_RECOVER) - qeth_start_again(card); + qeth_start_again(card, recovery_mode); qeth_notify_processes(); return 0; out_remove: card->use_hard_stop = 1; - qeth_stop_card(card); + qeth_stop_card(card, 0); ccw_device_set_offline(CARD_DDEV(card)); ccw_device_set_offline(CARD_WDEV(card)); ccw_device_set_offline(CARD_RDEV(card)); @@ -7480,6 +7584,12 @@ out_remove: return -ENODEV; } +static int +qeth_set_online(struct ccwgroup_device *gdev) +{ + return __qeth_set_online(gdev, 0); +} + static struct ccw_device_id qeth_ids[] = { {CCW_DEVICE(0x1731, 0x01), driver_info:QETH_CARD_TYPE_OSAE}, {CCW_DEVICE(0x1731, 0x05), driver_info:QETH_CARD_TYPE_IQD}, diff --git a/drivers/s390/net/qeth_tso.c b/drivers/s390/net/qeth_tso.c deleted file mode 100644 index c91976274e7..00000000000 --- a/drivers/s390/net/qeth_tso.c +++ /dev/null @@ -1,285 +0,0 @@ -/* - * linux/drivers/s390/net/qeth_tso.c ($Revision: 1.6 $) - * - * Header file for qeth TCP Segmentation Offload support. - * - * Copyright 2004 IBM Corporation - * - * Author(s): Frank Pavlic <pavlic@de.ibm.com> - * - * $Revision: 1.6 $ $Date: 2005/03/24 09:04:18 $ - * - */ - -#include <linux/skbuff.h> -#include <linux/tcp.h> -#include <linux/ip.h> -#include <linux/ipv6.h> -#include <net/ip6_checksum.h> -#include "qeth.h" -#include "qeth_mpc.h" -#include "qeth_tso.h" - -/** - * skb already partially prepared - * classic qdio header in skb->data - * */ -static inline struct qeth_hdr_tso * -qeth_tso_prepare_skb(struct qeth_card *card, struct sk_buff **skb) -{ - int rc = 0; - - QETH_DBF_TEXT(trace, 5, "tsoprsk"); - rc = qeth_realloc_headroom(card, skb,sizeof(struct qeth_hdr_ext_tso)); - if (rc) - return NULL; - - return qeth_push_skb(card, skb, sizeof(struct qeth_hdr_ext_tso)); -} - -/** - * fill header for a TSO packet - */ -static inline void -qeth_tso_fill_header(struct qeth_card *card, struct sk_buff *skb) -{ - struct qeth_hdr_tso *hdr; - struct tcphdr *tcph; - struct iphdr *iph; - - QETH_DBF_TEXT(trace, 5, "tsofhdr"); - - hdr = (struct qeth_hdr_tso *) skb->data; - iph = skb->nh.iph; - tcph = skb->h.th; - /*fix header to TSO values ...*/ - hdr->hdr.hdr.l3.id = QETH_HEADER_TYPE_TSO; - /*set values which are fix for the first approach ...*/ - hdr->ext.hdr_tot_len = (__u16) sizeof(struct qeth_hdr_ext_tso); - hdr->ext.imb_hdr_no = 1; - hdr->ext.hdr_type = 1; - hdr->ext.hdr_version = 1; - hdr->ext.hdr_len = 28; - /*insert non-fix values */ - hdr->ext.mss = skb_shinfo(skb)->tso_size; - hdr->ext.dg_hdr_len = (__u16)(iph->ihl*4 + tcph->doff*4); - hdr->ext.payload_len = (__u16)(skb->len - hdr->ext.dg_hdr_len - - sizeof(struct qeth_hdr_tso)); -} - -/** - * change some header values as requested by hardware - */ -static inline void -qeth_tso_set_tcpip_header(struct qeth_card *card, struct sk_buff *skb) -{ - struct iphdr *iph; - struct ipv6hdr *ip6h; - struct tcphdr *tcph; - - iph = skb->nh.iph; - ip6h = skb->nh.ipv6h; - tcph = skb->h.th; - - tcph->check = 0; - if (skb->protocol == ETH_P_IPV6) { - ip6h->payload_len = 0; - tcph->check = ~csum_ipv6_magic(&ip6h->saddr, &ip6h->daddr, - 0, IPPROTO_TCP, 0); - return; - } - /*OSA want us to set these values ...*/ - tcph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, - 0, IPPROTO_TCP, 0); - iph->tot_len = 0; - iph->check = 0; -} - -static inline struct qeth_hdr_tso * -qeth_tso_prepare_packet(struct qeth_card *card, struct sk_buff *skb, - int ipv, int cast_type) -{ - struct qeth_hdr_tso *hdr; - int rc = 0; - - QETH_DBF_TEXT(trace, 5, "tsoprep"); - - /*get headroom for tso qdio header */ - hdr = (struct qeth_hdr_tso *) qeth_tso_prepare_skb(card, &skb); - if (hdr == NULL) { - QETH_DBF_TEXT_(trace, 4, "2err%d", rc); - return NULL; - } - memset(hdr, 0, sizeof(struct qeth_hdr_tso)); - /*fill first 32 bytes of qdio header as used - *FIXME: TSO has two struct members - * with different names but same size - * */ - qeth_fill_header(card, &hdr->hdr, skb, ipv, cast_type); - qeth_tso_fill_header(card, skb); - qeth_tso_set_tcpip_header(card, skb); - return hdr; -} - -static inline int -qeth_tso_get_queue_buffer(struct qeth_qdio_out_q *queue) -{ - struct qeth_qdio_out_buffer *buffer; - int flush_cnt = 0; - - QETH_DBF_TEXT(trace, 5, "tsobuf"); - - /* force to non-packing*/ - if (queue->do_pack) - queue->do_pack = 0; - buffer = &queue->bufs[queue->next_buf_to_fill]; - /* get a new buffer if current is already in use*/ - if ((atomic_read(&buffer->state) == QETH_QDIO_BUF_EMPTY) && - (buffer->next_element_to_fill > 0)) { - atomic_set(&buffer->state, QETH_QDIO_BUF_PRIMED); - queue->next_buf_to_fill = (queue->next_buf_to_fill + 1) % - QDIO_MAX_BUFFERS_PER_Q; - flush_cnt++; - } - return flush_cnt; -} - -static inline void -__qeth_tso_fill_buffer_frag(struct qeth_qdio_out_buffer *buf, - struct sk_buff *skb) -{ - struct skb_frag_struct *frag; - struct qdio_buffer *buffer; - int fragno, cnt, element; - unsigned long addr; - - QETH_DBF_TEXT(trace, 6, "tsfilfrg"); - - /*initialize variables ...*/ - fragno = skb_shinfo(skb)->nr_frags; - buffer = buf->buffer; - element = buf->next_element_to_fill; - /*fill buffer elements .....*/ - for (cnt = 0; cnt < fragno; cnt++) { - frag = &skb_shinfo(skb)->frags[cnt]; - addr = (page_to_pfn(frag->page) << PAGE_SHIFT) + - frag->page_offset; - buffer->element[element].addr = (char *)addr; - buffer->element[element].length = frag->size; - if (cnt < (fragno - 1)) - buffer->element[element].flags = - SBAL_FLAGS_MIDDLE_FRAG; - else - buffer->element[element].flags = - SBAL_FLAGS_LAST_FRAG; - element++; - } - buf->next_element_to_fill = element; -} - -static inline int -qeth_tso_fill_buffer(struct qeth_qdio_out_buffer *buf, - struct sk_buff *skb) -{ - int length, length_here, element; - int hdr_len; - struct qdio_buffer *buffer; - struct qeth_hdr_tso *hdr; - char *data; - - QETH_DBF_TEXT(trace, 3, "tsfilbuf"); - - /*increment user count and queue skb ...*/ - atomic_inc(&skb->users); - skb_queue_tail(&buf->skb_list, skb); - - /*initialize all variables...*/ - buffer = buf->buffer; - hdr = (struct qeth_hdr_tso *)skb->data; - hdr_len = sizeof(struct qeth_hdr_tso) + hdr->ext.dg_hdr_len; - data = skb->data + hdr_len; - length = skb->len - hdr_len; - element = buf->next_element_to_fill; - /*fill first buffer entry only with header information */ - buffer->element[element].addr = skb->data; - buffer->element[element].length = hdr_len; - buffer->element[element].flags = SBAL_FLAGS_FIRST_FRAG; - buf->next_element_to_fill++; - - if (skb_shinfo(skb)->nr_frags > 0) { - __qeth_tso_fill_buffer_frag(buf, skb); - goto out; - } - - /*start filling buffer entries ...*/ - element++; - while (length > 0) { - /* length_here is the remaining amount of data in this page */ - length_here = PAGE_SIZE - ((unsigned long) data % PAGE_SIZE); - if (length < length_here) - length_here = length; - buffer->element[element].addr = data; - buffer->element[element].length = length_here; - length -= length_here; - if (!length) - buffer->element[element].flags = - SBAL_FLAGS_LAST_FRAG; - else - buffer->element[element].flags = - SBAL_FLAGS_MIDDLE_FRAG; - data += length_here; - element++; - } - /*set the buffer to primed ...*/ - buf->next_element_to_fill = element; -out: - atomic_set(&buf->state, QETH_QDIO_BUF_PRIMED); - return 1; -} - -int -qeth_tso_send_packet(struct qeth_card *card, struct sk_buff *skb, - struct qeth_qdio_out_q *queue, int ipv, int cast_type) -{ - int flush_cnt = 0; - struct qeth_hdr_tso *hdr; - struct qeth_qdio_out_buffer *buffer; - int start_index; - - QETH_DBF_TEXT(trace, 3, "tsosend"); - - if (!(hdr = qeth_tso_prepare_packet(card, skb, ipv, cast_type))) - return -ENOMEM; - /*check if skb fits in one SBAL ...*/ - if (!(qeth_get_elements_no(card, (void*)hdr, skb))) - return -EINVAL; - /*lock queue, force switching to non-packing and send it ...*/ - while (atomic_compare_and_swap(QETH_OUT_Q_UNLOCKED, - QETH_OUT_Q_LOCKED, - &queue->state)); - start_index = queue->next_buf_to_fill; - buffer = &queue->bufs[queue->next_buf_to_fill]; - /*check if card is too busy ...*/ - if (atomic_read(&buffer->state) != QETH_QDIO_BUF_EMPTY){ - card->stats.tx_dropped++; - goto out; - } - /*let's force to non-packing and get a new SBAL*/ - flush_cnt += qeth_tso_get_queue_buffer(queue); - buffer = &queue->bufs[queue->next_buf_to_fill]; - if (atomic_read(&buffer->state) != QETH_QDIO_BUF_EMPTY) { - card->stats.tx_dropped++; - goto out; - } - flush_cnt += qeth_tso_fill_buffer(buffer, skb); - queue->next_buf_to_fill = (queue->next_buf_to_fill + 1) % - QDIO_MAX_BUFFERS_PER_Q; -out: - atomic_set(&queue->state, QETH_OUT_Q_UNLOCKED); - if (flush_cnt) - qeth_flush_buffers(queue, 0, start_index, flush_cnt); - /*do some statistics */ - card->stats.tx_packets++; - card->stats.tx_bytes += skb->len; - return 0; -} diff --git a/drivers/s390/net/qeth_tso.h b/drivers/s390/net/qeth_tso.h index 83504dee3f5..ad33e6f466f 100644 --- a/drivers/s390/net/qeth_tso.h +++ b/drivers/s390/net/qeth_tso.h @@ -1,5 +1,5 @@ /* - * linux/drivers/s390/net/qeth_tso.h ($Revision: 1.4 $) + * linux/drivers/s390/net/qeth_tso.h ($Revision: 1.7 $) * * Header file for qeth TCP Segmentation Offload support. * @@ -7,52 +7,148 @@ * * Author(s): Frank Pavlic <pavlic@de.ibm.com> * - * $Revision: 1.4 $ $Date: 2005/03/24 09:04:18 $ + * $Revision: 1.7 $ $Date: 2005/05/04 20:19:18 $ * */ #ifndef __QETH_TSO_H__ #define __QETH_TSO_H__ +#include <linux/skbuff.h> +#include <linux/tcp.h> +#include <linux/ip.h> +#include <linux/ipv6.h> +#include <net/ip6_checksum.h> +#include "qeth.h" +#include "qeth_mpc.h" -extern int -qeth_tso_send_packet(struct qeth_card *, struct sk_buff *, - struct qeth_qdio_out_q *, int , int); -struct qeth_hdr_ext_tso { - __u16 hdr_tot_len; - __u8 imb_hdr_no; - __u8 reserved; - __u8 hdr_type; - __u8 hdr_version; - __u16 hdr_len; - __u32 payload_len; - __u16 mss; - __u16 dg_hdr_len; - __u8 padding[16]; -} __attribute__ ((packed)); +static inline struct qeth_hdr_tso * +qeth_tso_prepare_skb(struct qeth_card *card, struct sk_buff **skb) +{ + QETH_DBF_TEXT(trace, 5, "tsoprsk"); + return qeth_push_skb(card, skb, sizeof(struct qeth_hdr_tso)); +} + +/** + * fill header for a TSO packet + */ +static inline void +qeth_tso_fill_header(struct qeth_card *card, struct sk_buff *skb) +{ + struct qeth_hdr_tso *hdr; + struct tcphdr *tcph; + struct iphdr *iph; + + QETH_DBF_TEXT(trace, 5, "tsofhdr"); + + hdr = (struct qeth_hdr_tso *) skb->data; + iph = skb->nh.iph; + tcph = skb->h.th; + /*fix header to TSO values ...*/ + hdr->hdr.hdr.l3.id = QETH_HEADER_TYPE_TSO; + /*set values which are fix for the first approach ...*/ + hdr->ext.hdr_tot_len = (__u16) sizeof(struct qeth_hdr_ext_tso); + hdr->ext.imb_hdr_no = 1; + hdr->ext.hdr_type = 1; + hdr->ext.hdr_version = 1; + hdr->ext.hdr_len = 28; + /*insert non-fix values */ + hdr->ext.mss = skb_shinfo(skb)->tso_size; + hdr->ext.dg_hdr_len = (__u16)(iph->ihl*4 + tcph->doff*4); + hdr->ext.payload_len = (__u16)(skb->len - hdr->ext.dg_hdr_len - + sizeof(struct qeth_hdr_tso)); +} + +/** + * change some header values as requested by hardware + */ +static inline void +qeth_tso_set_tcpip_header(struct qeth_card *card, struct sk_buff *skb) +{ + struct iphdr *iph; + struct ipv6hdr *ip6h; + struct tcphdr *tcph; -struct qeth_hdr_tso { - struct qeth_hdr hdr; /*hdr->hdr.l3.xxx*/ - struct qeth_hdr_ext_tso ext; -} __attribute__ ((packed)); + iph = skb->nh.iph; + ip6h = skb->nh.ipv6h; + tcph = skb->h.th; -/*some helper functions*/ + tcph->check = 0; + if (skb->protocol == ETH_P_IPV6) { + ip6h->payload_len = 0; + tcph->check = ~csum_ipv6_magic(&ip6h->saddr, &ip6h->daddr, + 0, IPPROTO_TCP, 0); + return; + } + /*OSA want us to set these values ...*/ + tcph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, + 0, IPPROTO_TCP, 0); + iph->tot_len = 0; + iph->check = 0; +} static inline int -qeth_get_elements_no(struct qeth_card *card, void *hdr, struct sk_buff *skb) +qeth_tso_prepare_packet(struct qeth_card *card, struct sk_buff *skb, + int ipv, int cast_type) +{ + struct qeth_hdr_tso *hdr; + + QETH_DBF_TEXT(trace, 5, "tsoprep"); + + hdr = (struct qeth_hdr_tso *) qeth_tso_prepare_skb(card, &skb); + if (hdr == NULL) { + QETH_DBF_TEXT(trace, 4, "tsoperr"); + return -ENOMEM; + } + memset(hdr, 0, sizeof(struct qeth_hdr_tso)); + /*fill first 32 bytes of qdio header as used + *FIXME: TSO has two struct members + * with different names but same size + * */ + qeth_fill_header(card, &hdr->hdr, skb, ipv, cast_type); + qeth_tso_fill_header(card, skb); + qeth_tso_set_tcpip_header(card, skb); + return 0; +} + +static inline void +__qeth_fill_buffer_frag(struct sk_buff *skb, struct qdio_buffer *buffer, + int is_tso, int *next_element_to_fill) { - int elements_needed = 0; - - if (skb_shinfo(skb)->nr_frags > 0) - elements_needed = (skb_shinfo(skb)->nr_frags + 1); - if (elements_needed == 0 ) - elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE) - + skb->len) >> PAGE_SHIFT); - if (elements_needed > QETH_MAX_BUFFER_ELEMENTS(card)){ - PRINT_ERR("qeth_do_send_packet: invalid size of " - "IP packet. Discarded."); - return 0; + struct skb_frag_struct *frag; + int fragno; + unsigned long addr; + int element, cnt, dlen; + + fragno = skb_shinfo(skb)->nr_frags; + element = *next_element_to_fill; + dlen = 0; + + if (is_tso) + buffer->element[element].flags = + SBAL_FLAGS_MIDDLE_FRAG; + else + buffer->element[element].flags = + SBAL_FLAGS_FIRST_FRAG; + if ( (dlen = (skb->len - skb->data_len)) ) { + buffer->element[element].addr = skb->data; + buffer->element[element].length = dlen; + element++; + } + for (cnt = 0; cnt < fragno; cnt++) { + frag = &skb_shinfo(skb)->frags[cnt]; + addr = (page_to_pfn(frag->page) << PAGE_SHIFT) + + frag->page_offset; + buffer->element[element].addr = (char *)addr; + buffer->element[element].length = frag->size; + if (cnt < (fragno - 1)) + buffer->element[element].flags = + SBAL_FLAGS_MIDDLE_FRAG; + else + buffer->element[element].flags = + SBAL_FLAGS_LAST_FRAG; + element++; } - return elements_needed; + *next_element_to_fill = element; } #endif /* __QETH_TSO_H__ */ diff --git a/drivers/sbus/char/aurora.c b/drivers/sbus/char/aurora.c index e5fa1703856..650d5e924f4 100644 --- a/drivers/sbus/char/aurora.c +++ b/drivers/sbus/char/aurora.c @@ -81,10 +81,6 @@ unsigned char irqs[4] = { int irqhit=0; #endif -#ifndef MIN -#define MIN(a,b) ((a) < (b) ? (a) : (b)) -#endif - static struct tty_driver *aurora_driver; static struct Aurora_board aurora_board[AURORA_NBOARD] = { {0,}, @@ -594,7 +590,7 @@ static void aurora_transmit(struct Aurora_board const * bp, int chip) &bp->r[chip]->r[CD180_TDR]); port->COR2 &= ~COR2_ETC; } - count = MIN(port->break_length, 0xff); + count = min(port->break_length, 0xff); sbus_writeb(CD180_C_ESC, &bp->r[chip]->r[CD180_TDR]); sbus_writeb(CD180_C_DELAY, @@ -1575,7 +1571,7 @@ static int aurora_write(struct tty_struct * tty, save_flags(flags); while (1) { cli(); - c = MIN(count, MIN(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, + c = min(count, min(SERIAL_XMIT_SIZE - port->xmit_cnt - 1, SERIAL_XMIT_SIZE - port->xmit_head)); if (c <= 0) { restore_flags(flags); diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index da5bd33d982..fc5263c6b10 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -32,6 +32,7 @@ #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/sched.h> +#include <linux/dma-mapping.h> #include "scsi.h" #include <scsi/scsi_host.h> #include <linux/libata.h> @@ -289,6 +290,8 @@ static void ahci_host_stop(struct ata_host_set *host_set) { struct ahci_host_priv *hpriv = host_set->private_data; kfree(hpriv); + + ata_host_stop(host_set); } static int ahci_port_start(struct ata_port *ap) diff --git a/drivers/scsi/aic7xxx/aic7770_osm.c b/drivers/scsi/aic7xxx/aic7770_osm.c index c2b47f2bdff..682ca0b32b4 100644 --- a/drivers/scsi/aic7xxx/aic7770_osm.c +++ b/drivers/scsi/aic7xxx/aic7770_osm.c @@ -41,7 +41,6 @@ #include "aic7xxx_osm.h" -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) #include <linux/device.h> #include <linux/eisa.h> @@ -62,13 +61,6 @@ static struct eisa_driver aic7770_driver = { }; typedef struct device *aic7770_dev_t; -#else -#define MINSLOT 1 -#define NUMSLOTS 16 -#define IDOFFSET 0x80 - -typedef void *aic7770_dev_t; -#endif static int aic7770_linux_config(struct aic7770_identity *entry, aic7770_dev_t dev, u_int eisaBase); @@ -76,7 +68,6 @@ static int aic7770_linux_config(struct aic7770_identity *entry, int ahc_linux_eisa_init(void) { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) struct eisa_device_id *eid; struct aic7770_identity *id; int i; @@ -110,44 +101,6 @@ ahc_linux_eisa_init(void) eid->sig[0] = 0; return eisa_driver_register(&aic7770_driver); -#else /* LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) */ - struct aic7770_identity *entry; - u_int slot; - u_int eisaBase; - u_int i; - int ret = -ENODEV; - - if (aic7xxx_probe_eisa_vl == 0) - return ret; - - eisaBase = 0x1000 + AHC_EISA_SLOT_OFFSET; - for (slot = 1; slot < NUMSLOTS; eisaBase+=0x1000, slot++) { - uint32_t eisa_id; - size_t id_size; - - if (request_region(eisaBase, AHC_EISA_IOSIZE, "aic7xxx") == 0) - continue; - - eisa_id = 0; - id_size = sizeof(eisa_id); - for (i = 0; i < 4; i++) { - /* VLcards require priming*/ - outb(0x80 + i, eisaBase + IDOFFSET); - eisa_id |= inb(eisaBase + IDOFFSET + i) - << ((id_size-i-1) * 8); - } - release_region(eisaBase, AHC_EISA_IOSIZE); - if (eisa_id & 0x80000000) - continue; /* no EISA card in slot */ - - entry = aic7770_find_device(eisa_id); - if (entry != NULL) { - aic7770_linux_config(entry, NULL, eisaBase); - ret = 0; - } - } - return ret; -#endif } void @@ -187,11 +140,10 @@ aic7770_linux_config(struct aic7770_identity *entry, aic7770_dev_t dev, ahc_free(ahc); return (error); } -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) + dev->driver_data = (void *)ahc; if (aic7xxx_detect_complete) error = ahc_linux_register_host(ahc, &aic7xxx_driver_template); -#endif return (error); } @@ -225,7 +177,6 @@ aic7770_map_int(struct ahc_softc *ahc, u_int irq) return (-error); } -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) static int aic7770_eisa_dev_probe(struct device *dev) { @@ -261,4 +212,3 @@ aic7770_eisa_dev_remove(struct device *dev) return (0); } -#endif diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c index 550c9921691..7c02b7dc709 100644 --- a/drivers/scsi/aic7xxx/aic79xx_osm.c +++ b/drivers/scsi/aic7xxx/aic79xx_osm.c @@ -2488,7 +2488,7 @@ ahd_linux_dv_thread(void *data) sprintf(current->comm, "ahd_dv_%d", ahd->unit); #else daemonize("ahd_dv_%d", ahd->unit); - current->flags |= PF_FREEZE; + current->flags |= PF_NOFREEZE; #endif unlock_kernel(); diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c index d978e4a3e97..c13e5632001 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c @@ -134,11 +134,6 @@ static struct scsi_transport_template *ahc_linux_transport_template = NULL; #include "aiclib.c" #include <linux/init.h> /* __setup */ - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#include "sd.h" /* For geometry detection */ -#endif - #include <linux/mm.h> /* For fetching system memory size */ #include <linux/blkdev.h> /* For block_size() */ #include <linux/delay.h> /* For ssleep/msleep */ @@ -148,11 +143,6 @@ static struct scsi_transport_template *ahc_linux_transport_template = NULL; */ spinlock_t ahc_list_spinlock; -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -/* For dynamic sglist size calculation. */ -u_int ahc_linux_nseg; -#endif - /* * Set this to the delay in seconds after SCSI bus reset. * Note, we honor this only for the initial bus reset. @@ -436,15 +426,12 @@ static void ahc_linux_handle_scsi_status(struct ahc_softc *, struct ahc_linux_device *, struct scb *); static void ahc_linux_queue_cmd_complete(struct ahc_softc *ahc, - Scsi_Cmnd *cmd); + struct scsi_cmnd *cmd); static void ahc_linux_sem_timeout(u_long arg); static void ahc_linux_freeze_simq(struct ahc_softc *ahc); static void ahc_linux_release_simq(u_long arg); -static void ahc_linux_dev_timed_unfreeze(u_long arg); -static int ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag); +static int ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag); static void ahc_linux_initialize_scsi_bus(struct ahc_softc *ahc); -static void ahc_linux_size_nseg(void); -static void ahc_linux_thread_run_complete_queue(struct ahc_softc *ahc); static u_int ahc_linux_user_tagdepth(struct ahc_softc *ahc, struct ahc_devinfo *devinfo); static void ahc_linux_device_queue_depth(struct ahc_softc *ahc, @@ -458,54 +445,27 @@ static struct ahc_linux_device* ahc_linux_alloc_device(struct ahc_softc*, u_int); static void ahc_linux_free_device(struct ahc_softc*, struct ahc_linux_device*); -static void ahc_linux_run_device_queue(struct ahc_softc*, - struct ahc_linux_device*); +static int ahc_linux_run_command(struct ahc_softc*, + struct ahc_linux_device *, + struct scsi_cmnd *); static void ahc_linux_setup_tag_info_global(char *p); static aic_option_callback_t ahc_linux_setup_tag_info; static int aic7xxx_setup(char *s); static int ahc_linux_next_unit(void); -static void ahc_runq_tasklet(unsigned long data); -static struct ahc_cmd *ahc_linux_run_complete_queue(struct ahc_softc *ahc); /********************************* Inlines ************************************/ -static __inline void ahc_schedule_runq(struct ahc_softc *ahc); static __inline struct ahc_linux_device* ahc_linux_get_device(struct ahc_softc *ahc, u_int channel, - u_int target, u_int lun, int alloc); -static __inline void ahc_schedule_completeq(struct ahc_softc *ahc); -static __inline void ahc_linux_check_device_queue(struct ahc_softc *ahc, - struct ahc_linux_device *dev); -static __inline struct ahc_linux_device * - ahc_linux_next_device_to_run(struct ahc_softc *ahc); -static __inline void ahc_linux_run_device_queues(struct ahc_softc *ahc); + u_int target, u_int lun); static __inline void ahc_linux_unmap_scb(struct ahc_softc*, struct scb*); static __inline int ahc_linux_map_seg(struct ahc_softc *ahc, struct scb *scb, struct ahc_dma_seg *sg, dma_addr_t addr, bus_size_t len); -static __inline void -ahc_schedule_completeq(struct ahc_softc *ahc) -{ - if ((ahc->platform_data->flags & AHC_RUN_CMPLT_Q_TIMER) == 0) { - ahc->platform_data->flags |= AHC_RUN_CMPLT_Q_TIMER; - ahc->platform_data->completeq_timer.expires = jiffies; - add_timer(&ahc->platform_data->completeq_timer); - } -} - -/* - * Must be called with our lock held. - */ -static __inline void -ahc_schedule_runq(struct ahc_softc *ahc) -{ - tasklet_schedule(&ahc->platform_data->runq_tasklet); -} - static __inline struct ahc_linux_device* ahc_linux_get_device(struct ahc_softc *ahc, u_int channel, u_int target, - u_int lun, int alloc) + u_int lun) { struct ahc_linux_target *targ; struct ahc_linux_device *dev; @@ -515,102 +475,15 @@ ahc_linux_get_device(struct ahc_softc *ahc, u_int channel, u_int target, if (channel != 0) target_offset += 8; targ = ahc->platform_data->targets[target_offset]; - if (targ == NULL) { - if (alloc != 0) { - targ = ahc_linux_alloc_target(ahc, channel, target); - if (targ == NULL) - return (NULL); - } else - return (NULL); - } + BUG_ON(targ == NULL); dev = targ->devices[lun]; - if (dev == NULL && alloc != 0) - dev = ahc_linux_alloc_device(ahc, targ, lun); - return (dev); -} - -#define AHC_LINUX_MAX_RETURNED_ERRORS 4 -static struct ahc_cmd * -ahc_linux_run_complete_queue(struct ahc_softc *ahc) -{ - struct ahc_cmd *acmd; - u_long done_flags; - int with_errors; - - with_errors = 0; - ahc_done_lock(ahc, &done_flags); - while ((acmd = TAILQ_FIRST(&ahc->platform_data->completeq)) != NULL) { - Scsi_Cmnd *cmd; - - if (with_errors > AHC_LINUX_MAX_RETURNED_ERRORS) { - /* - * Linux uses stack recursion to requeue - * commands that need to be retried. Avoid - * blowing out the stack by "spoon feeding" - * commands that completed with error back - * the operating system in case they are going - * to be retried. "ick" - */ - ahc_schedule_completeq(ahc); - break; - } - TAILQ_REMOVE(&ahc->platform_data->completeq, - acmd, acmd_links.tqe); - cmd = &acmd_scsi_cmd(acmd); - cmd->host_scribble = NULL; - if (ahc_cmd_get_transaction_status(cmd) != DID_OK - || (cmd->result & 0xFF) != SCSI_STATUS_OK) - with_errors++; - - cmd->scsi_done(cmd); - } - ahc_done_unlock(ahc, &done_flags); - return (acmd); -} - -static __inline void -ahc_linux_check_device_queue(struct ahc_softc *ahc, - struct ahc_linux_device *dev) -{ - if ((dev->flags & AHC_DEV_FREEZE_TIL_EMPTY) != 0 - && dev->active == 0) { - dev->flags &= ~AHC_DEV_FREEZE_TIL_EMPTY; - dev->qfrozen--; - } - - if (TAILQ_FIRST(&dev->busyq) == NULL - || dev->openings == 0 || dev->qfrozen != 0) - return; - - ahc_linux_run_device_queue(ahc, dev); -} - -static __inline struct ahc_linux_device * -ahc_linux_next_device_to_run(struct ahc_softc *ahc) -{ - - if ((ahc->flags & AHC_RESOURCE_SHORTAGE) != 0 - || (ahc->platform_data->qfrozen != 0)) - return (NULL); - return (TAILQ_FIRST(&ahc->platform_data->device_runq)); -} - -static __inline void -ahc_linux_run_device_queues(struct ahc_softc *ahc) -{ - struct ahc_linux_device *dev; - - while ((dev = ahc_linux_next_device_to_run(ahc)) != NULL) { - TAILQ_REMOVE(&ahc->platform_data->device_runq, dev, links); - dev->flags &= ~AHC_DEV_ON_RUN_LIST; - ahc_linux_check_device_queue(ahc, dev); - } + return dev; } static __inline void ahc_linux_unmap_scb(struct ahc_softc *ahc, struct scb *scb) { - Scsi_Cmnd *cmd; + struct scsi_cmnd *cmd; cmd = scb->io_ctx; ahc_sync_sglist(ahc, scb, BUS_DMASYNC_POSTWRITE); @@ -650,109 +523,15 @@ ahc_linux_map_seg(struct ahc_softc *ahc, struct scb *scb, return (consumed); } -/************************ Host template entry points *************************/ -static int ahc_linux_detect(Scsi_Host_Template *); -static int ahc_linux_queue(Scsi_Cmnd *, void (*)(Scsi_Cmnd *)); -static const char *ahc_linux_info(struct Scsi_Host *); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) -static int ahc_linux_slave_alloc(Scsi_Device *); -static int ahc_linux_slave_configure(Scsi_Device *); -static void ahc_linux_slave_destroy(Scsi_Device *); -#if defined(__i386__) -static int ahc_linux_biosparam(struct scsi_device*, - struct block_device*, - sector_t, int[]); -#endif -#else -static int ahc_linux_release(struct Scsi_Host *); -static void ahc_linux_select_queue_depth(struct Scsi_Host *host, - Scsi_Device *scsi_devs); -#if defined(__i386__) -static int ahc_linux_biosparam(Disk *, kdev_t, int[]); -#endif -#endif -static int ahc_linux_bus_reset(Scsi_Cmnd *); -static int ahc_linux_dev_reset(Scsi_Cmnd *); -static int ahc_linux_abort(Scsi_Cmnd *); - -/* - * Calculate a safe value for AHC_NSEG (as expressed through ahc_linux_nseg). - * - * In pre-2.5.X... - * The midlayer allocates an S/G array dynamically when a command is issued - * using SCSI malloc. This array, which is in an OS dependent format that - * must later be copied to our private S/G list, is sized to house just the - * number of segments needed for the current transfer. Since the code that - * sizes the SCSI malloc pool does not take into consideration fragmentation - * of the pool, executing transactions numbering just a fraction of our - * concurrent transaction limit with list lengths aproaching AHC_NSEG will - * quickly depleat the SCSI malloc pool of usable space. Unfortunately, the - * mid-layer does not properly handle this scsi malloc failures for the S/G - * array and the result can be a lockup of the I/O subsystem. We try to size - * our S/G list so that it satisfies our drivers allocation requirements in - * addition to avoiding fragmentation of the SCSI malloc pool. - */ -static void -ahc_linux_size_nseg(void) -{ -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - u_int cur_size; - u_int best_size; - - /* - * The SCSI allocator rounds to the nearest 512 bytes - * an cannot allocate across a page boundary. Our algorithm - * is to start at 1K of scsi malloc space per-command and - * loop through all factors of the PAGE_SIZE and pick the best. - */ - best_size = 0; - for (cur_size = 1024; cur_size <= PAGE_SIZE; cur_size *= 2) { - u_int nseg; - - nseg = cur_size / sizeof(struct scatterlist); - if (nseg < AHC_LINUX_MIN_NSEG) - continue; - - if (best_size == 0) { - best_size = cur_size; - ahc_linux_nseg = nseg; - } else { - u_int best_rem; - u_int cur_rem; - - /* - * Compare the traits of the current "best_size" - * with the current size to determine if the - * current size is a better size. - */ - best_rem = best_size % sizeof(struct scatterlist); - cur_rem = cur_size % sizeof(struct scatterlist); - if (cur_rem < best_rem) { - best_size = cur_size; - ahc_linux_nseg = nseg; - } - } - } -#endif -} - /* * Try to detect an Adaptec 7XXX controller. */ static int -ahc_linux_detect(Scsi_Host_Template *template) +ahc_linux_detect(struct scsi_host_template *template) { struct ahc_softc *ahc; int found = 0; -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - /* - * It is a bug that the upper layer takes - * this lock just prior to calling us. - */ - spin_unlock_irq(&io_request_lock); -#endif - /* * Sanity checking of Linux SCSI data structures so * that some of our hacks^H^H^H^H^Hassumptions aren't @@ -764,7 +543,6 @@ ahc_linux_detect(Scsi_Host_Template *template) printf("ahc_linux_detect: Unable to attach\n"); return (0); } - ahc_linux_size_nseg(); /* * If we've been passed any parameters, process them now. */ @@ -793,48 +571,11 @@ ahc_linux_detect(Scsi_Host_Template *template) found++; } -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - spin_lock_irq(&io_request_lock); -#endif aic7xxx_detect_complete++; return (found); } -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -/* - * Free the passed in Scsi_Host memory structures prior to unloading the - * module. - */ -int -ahc_linux_release(struct Scsi_Host * host) -{ - struct ahc_softc *ahc; - u_long l; - - ahc_list_lock(&l); - if (host != NULL) { - - /* - * We should be able to just perform - * the free directly, but check our - * list for extra sanity. - */ - ahc = ahc_find_softc(*(struct ahc_softc **)host->hostdata); - if (ahc != NULL) { - u_long s; - - ahc_lock(ahc, &s); - ahc_intr_enable(ahc, FALSE); - ahc_unlock(ahc, &s); - ahc_free(ahc); - } - } - ahc_list_unlock(&l); - return (0); -} -#endif - /* * Return a string describing the driver. */ @@ -867,11 +608,10 @@ ahc_linux_info(struct Scsi_Host *host) * Queue an SCB to the controller. */ static int -ahc_linux_queue(Scsi_Cmnd * cmd, void (*scsi_done) (Scsi_Cmnd *)) +ahc_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *)) { struct ahc_softc *ahc; struct ahc_linux_device *dev; - u_long flags; ahc = *(struct ahc_softc **)cmd->device->host->hostdata; @@ -880,205 +620,152 @@ ahc_linux_queue(Scsi_Cmnd * cmd, void (*scsi_done) (Scsi_Cmnd *)) */ cmd->scsi_done = scsi_done; - ahc_midlayer_entrypoint_lock(ahc, &flags); - /* * Close the race of a command that was in the process of * being queued to us just as our simq was frozen. Let * DV commands through so long as we are only frozen to * perform DV. */ - if (ahc->platform_data->qfrozen != 0) { + if (ahc->platform_data->qfrozen != 0) + return SCSI_MLQUEUE_HOST_BUSY; - ahc_cmd_set_transaction_status(cmd, CAM_REQUEUE_REQ); - ahc_linux_queue_cmd_complete(ahc, cmd); - ahc_schedule_completeq(ahc); - ahc_midlayer_entrypoint_unlock(ahc, &flags); - return (0); - } dev = ahc_linux_get_device(ahc, cmd->device->channel, cmd->device->id, - cmd->device->lun, /*alloc*/TRUE); - if (dev == NULL) { - ahc_cmd_set_transaction_status(cmd, CAM_RESRC_UNAVAIL); - ahc_linux_queue_cmd_complete(ahc, cmd); - ahc_schedule_completeq(ahc); - ahc_midlayer_entrypoint_unlock(ahc, &flags); - printf("%s: aic7xxx_linux_queue - Unable to allocate device!\n", - ahc_name(ahc)); - return (0); - } + cmd->device->lun); + BUG_ON(dev == NULL); + cmd->result = CAM_REQ_INPROG << 16; - TAILQ_INSERT_TAIL(&dev->busyq, (struct ahc_cmd *)cmd, acmd_links.tqe); - if ((dev->flags & AHC_DEV_ON_RUN_LIST) == 0) { - TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq, dev, links); - dev->flags |= AHC_DEV_ON_RUN_LIST; - ahc_linux_run_device_queues(ahc); - } - ahc_midlayer_entrypoint_unlock(ahc, &flags); - return (0); + + return ahc_linux_run_command(ahc, dev, cmd); } -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) static int -ahc_linux_slave_alloc(Scsi_Device *device) +ahc_linux_slave_alloc(struct scsi_device *device) { struct ahc_softc *ahc; + struct ahc_linux_target *targ; + struct scsi_target *starget = device->sdev_target; + struct ahc_linux_device *dev; + unsigned int target_offset; + unsigned long flags; + int retval = -ENOMEM; + + target_offset = starget->id; + if (starget->channel != 0) + target_offset += 8; ahc = *((struct ahc_softc **)device->host->hostdata); if (bootverbose) printf("%s: Slave Alloc %d\n", ahc_name(ahc), device->id); - return (0); + ahc_lock(ahc, &flags); + targ = ahc->platform_data->targets[target_offset]; + if (targ == NULL) { + struct seeprom_config *sc; + + targ = ahc_linux_alloc_target(ahc, starget->channel, + starget->id); + sc = ahc->seep_config; + if (targ == NULL) + goto out; + + if (sc) { + unsigned short scsirate; + struct ahc_devinfo devinfo; + struct ahc_initiator_tinfo *tinfo; + struct ahc_tmode_tstate *tstate; + char channel = starget->channel + 'A'; + unsigned int our_id = ahc->our_id; + + if (starget->channel) + our_id = ahc->our_id_b; + + if ((ahc->features & AHC_ULTRA2) != 0) { + scsirate = sc->device_flags[target_offset] & CFXFER; + } else { + scsirate = (sc->device_flags[target_offset] & CFXFER) << 4; + if (sc->device_flags[target_offset] & CFSYNCH) + scsirate |= SOFS; + } + if (sc->device_flags[target_offset] & CFWIDEB) { + scsirate |= WIDEXFER; + spi_max_width(starget) = 1; + } else + spi_max_width(starget) = 0; + spi_min_period(starget) = + ahc_find_period(ahc, scsirate, AHC_SYNCRATE_DT); + tinfo = ahc_fetch_transinfo(ahc, channel, ahc->our_id, + targ->target, &tstate); + ahc_compile_devinfo(&devinfo, our_id, targ->target, + CAM_LUN_WILDCARD, channel, + ROLE_INITIATOR); + ahc_set_syncrate(ahc, &devinfo, NULL, 0, 0, 0, + AHC_TRANS_GOAL, /*paused*/FALSE); + ahc_set_width(ahc, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, + AHC_TRANS_GOAL, /*paused*/FALSE); + } + + } + dev = targ->devices[device->lun]; + if (dev == NULL) { + dev = ahc_linux_alloc_device(ahc, targ, device->lun); + if (dev == NULL) + goto out; + } + retval = 0; + + out: + ahc_unlock(ahc, &flags); + return retval; } static int -ahc_linux_slave_configure(Scsi_Device *device) +ahc_linux_slave_configure(struct scsi_device *device) { struct ahc_softc *ahc; struct ahc_linux_device *dev; - u_long flags; ahc = *((struct ahc_softc **)device->host->hostdata); + if (bootverbose) printf("%s: Slave Configure %d\n", ahc_name(ahc), device->id); - ahc_midlayer_entrypoint_lock(ahc, &flags); - /* - * Since Linux has attached to the device, configure - * it so we don't free and allocate the device - * structure on every command. - */ - dev = ahc_linux_get_device(ahc, device->channel, - device->id, device->lun, - /*alloc*/TRUE); - if (dev != NULL) { - dev->flags &= ~AHC_DEV_UNCONFIGURED; - dev->scsi_device = device; - ahc_linux_device_queue_depth(ahc, dev); - } - ahc_midlayer_entrypoint_unlock(ahc, &flags); + + dev = ahc_linux_get_device(ahc, device->channel, device->id, + device->lun); + dev->scsi_device = device; + ahc_linux_device_queue_depth(ahc, dev); /* Initial Domain Validation */ if (!spi_initial_dv(device->sdev_target)) spi_dv_device(device); - return (0); + return 0; } static void -ahc_linux_slave_destroy(Scsi_Device *device) +ahc_linux_slave_destroy(struct scsi_device *device) { struct ahc_softc *ahc; struct ahc_linux_device *dev; - u_long flags; ahc = *((struct ahc_softc **)device->host->hostdata); if (bootverbose) printf("%s: Slave Destroy %d\n", ahc_name(ahc), device->id); - ahc_midlayer_entrypoint_lock(ahc, &flags); dev = ahc_linux_get_device(ahc, device->channel, - device->id, device->lun, - /*alloc*/FALSE); - /* - * Filter out "silly" deletions of real devices by only - * deleting devices that have had slave_configure() - * called on them. All other devices that have not - * been configured will automatically be deleted by - * the refcounting process. - */ - if (dev != NULL - && (dev->flags & AHC_DEV_SLAVE_CONFIGURED) != 0) { - dev->flags |= AHC_DEV_UNCONFIGURED; - if (TAILQ_EMPTY(&dev->busyq) - && dev->active == 0 - && (dev->flags & AHC_DEV_TIMER_ACTIVE) == 0) - ahc_linux_free_device(ahc, dev); - } - ahc_midlayer_entrypoint_unlock(ahc, &flags); -} -#else -/* - * Sets the queue depth for each SCSI device hanging - * off the input host adapter. - */ -static void -ahc_linux_select_queue_depth(struct Scsi_Host *host, Scsi_Device *scsi_devs) -{ - Scsi_Device *device; - Scsi_Device *ldev; - struct ahc_softc *ahc; - u_long flags; + device->id, device->lun); - ahc = *((struct ahc_softc **)host->hostdata); - ahc_lock(ahc, &flags); - for (device = scsi_devs; device != NULL; device = device->next) { + BUG_ON(dev->active); - /* - * Watch out for duplicate devices. This works around - * some quirks in how the SCSI scanning code does its - * device management. - */ - for (ldev = scsi_devs; ldev != device; ldev = ldev->next) { - if (ldev->host == device->host - && ldev->channel == device->channel - && ldev->id == device->id - && ldev->lun == device->lun) - break; - } - /* Skip duplicate. */ - if (ldev != device) - continue; - - if (device->host == host) { - struct ahc_linux_device *dev; - - /* - * Since Linux has attached to the device, configure - * it so we don't free and allocate the device - * structure on every command. - */ - dev = ahc_linux_get_device(ahc, device->channel, - device->id, device->lun, - /*alloc*/TRUE); - if (dev != NULL) { - dev->flags &= ~AHC_DEV_UNCONFIGURED; - dev->scsi_device = device; - ahc_linux_device_queue_depth(ahc, dev); - device->queue_depth = dev->openings - + dev->active; - if ((dev->flags & (AHC_DEV_Q_BASIC - | AHC_DEV_Q_TAGGED)) == 0) { - /* - * We allow the OS to queue 2 untagged - * transactions to us at any time even - * though we can only execute them - * serially on the controller/device. - * This should remove some latency. - */ - device->queue_depth = 2; - } - } - } - } - ahc_unlock(ahc, &flags); + ahc_linux_free_device(ahc, dev); } -#endif #if defined(__i386__) /* * Return the disk geometry for the given SCSI device. */ static int -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) ahc_linux_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[]) { uint8_t *bh; -#else -ahc_linux_biosparam(Disk *disk, kdev_t dev, int geom[]) -{ - struct scsi_device *sdev = disk->device; - u_long capacity = disk->capacity; - struct buffer_head *bh; -#endif int heads; int sectors; int cylinders; @@ -1090,22 +777,11 @@ ahc_linux_biosparam(Disk *disk, kdev_t dev, int geom[]) ahc = *((struct ahc_softc **)sdev->host->hostdata); channel = sdev->channel; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) bh = scsi_bios_ptable(bdev); -#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,17) - bh = bread(MKDEV(MAJOR(dev), MINOR(dev) & ~0xf), 0, block_size(dev)); -#else - bh = bread(MKDEV(MAJOR(dev), MINOR(dev) & ~0xf), 0, 1024); -#endif - if (bh) { ret = scsi_partsize(bh, capacity, &geom[2], &geom[0], &geom[1]); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) kfree(bh); -#else - brelse(bh); -#endif if (ret != -1) return (ret); } @@ -1135,7 +811,7 @@ ahc_linux_biosparam(Disk *disk, kdev_t dev, int geom[]) * Abort the current SCSI command(s). */ static int -ahc_linux_abort(Scsi_Cmnd *cmd) +ahc_linux_abort(struct scsi_cmnd *cmd) { int error; @@ -1149,7 +825,7 @@ ahc_linux_abort(Scsi_Cmnd *cmd) * Attempt to send a target reset message to the device that timed out. */ static int -ahc_linux_dev_reset(Scsi_Cmnd *cmd) +ahc_linux_dev_reset(struct scsi_cmnd *cmd) { int error; @@ -1163,18 +839,14 @@ ahc_linux_dev_reset(Scsi_Cmnd *cmd) * Reset the SCSI bus. */ static int -ahc_linux_bus_reset(Scsi_Cmnd *cmd) +ahc_linux_bus_reset(struct scsi_cmnd *cmd) { struct ahc_softc *ahc; - u_long s; int found; ahc = *(struct ahc_softc **)cmd->device->host->hostdata; - ahc_midlayer_entrypoint_lock(ahc, &s); found = ahc_reset_channel(ahc, cmd->device->channel + 'A', /*initiate reset*/TRUE); - ahc_linux_run_complete_queue(ahc); - ahc_midlayer_entrypoint_unlock(ahc, &s); if (bootverbose) printf("%s: SCSI bus reset delivered. " @@ -1183,7 +855,7 @@ ahc_linux_bus_reset(Scsi_Cmnd *cmd) return SUCCESS; } -Scsi_Host_Template aic7xxx_driver_template = { +struct scsi_host_template aic7xxx_driver_template = { .module = THIS_MODULE, .name = "aic7xxx", .proc_info = ahc_linux_proc_info, @@ -1206,33 +878,6 @@ Scsi_Host_Template aic7xxx_driver_template = { /**************************** Tasklet Handler *********************************/ -/* - * In 2.4.X and above, this routine is called from a tasklet, - * so we must re-acquire our lock prior to executing this code. - * In all prior kernels, ahc_schedule_runq() calls this routine - * directly and ahc_schedule_runq() is called with our lock held. - */ -static void -ahc_runq_tasklet(unsigned long data) -{ - struct ahc_softc* ahc; - struct ahc_linux_device *dev; - u_long flags; - - ahc = (struct ahc_softc *)data; - ahc_lock(ahc, &flags); - while ((dev = ahc_linux_next_device_to_run(ahc)) != NULL) { - - TAILQ_REMOVE(&ahc->platform_data->device_runq, dev, links); - dev->flags &= ~AHC_DEV_ON_RUN_LIST; - ahc_linux_check_device_queue(ahc, dev); - /* Yeild to our interrupt handler */ - ahc_unlock(ahc, &flags); - ahc_lock(ahc, &flags); - } - ahc_unlock(ahc, &flags); -} - /******************************** Macros **************************************/ #define BUILD_SCSIID(ahc, cmd) \ ((((cmd)->device->id << TID_SHIFT) & TID) \ @@ -1278,37 +923,11 @@ int ahc_dmamem_alloc(struct ahc_softc *ahc, bus_dma_tag_t dmat, void** vaddr, int flags, bus_dmamap_t *mapp) { - bus_dmamap_t map; - - map = malloc(sizeof(*map), M_DEVBUF, M_NOWAIT); - if (map == NULL) - return (ENOMEM); - /* - * Although we can dma data above 4GB, our - * "consistent" memory is below 4GB for - * space efficiency reasons (only need a 4byte - * address). For this reason, we have to reset - * our dma mask when doing allocations. - */ - if (ahc->dev_softc != NULL) - if (pci_set_dma_mask(ahc->dev_softc, 0xFFFFFFFF)) { - printk(KERN_WARNING "aic7xxx: No suitable DMA available.\n"); - kfree(map); - return (ENODEV); - } *vaddr = pci_alloc_consistent(ahc->dev_softc, - dmat->maxsize, &map->bus_addr); - if (ahc->dev_softc != NULL) - if (pci_set_dma_mask(ahc->dev_softc, - ahc->platform_data->hw_dma_mask)) { - printk(KERN_WARNING "aic7xxx: No suitable DMA available.\n"); - kfree(map); - return (ENODEV); - } + dmat->maxsize, mapp); if (*vaddr == NULL) - return (ENOMEM); - *mapp = map; - return(0); + return ENOMEM; + return 0; } void @@ -1316,7 +935,7 @@ ahc_dmamem_free(struct ahc_softc *ahc, bus_dma_tag_t dmat, void* vaddr, bus_dmamap_t map) { pci_free_consistent(ahc->dev_softc, dmat->maxsize, - vaddr, map->bus_addr); + vaddr, map); } int @@ -1330,7 +949,7 @@ ahc_dmamap_load(struct ahc_softc *ahc, bus_dma_tag_t dmat, bus_dmamap_t map, */ bus_dma_segment_t stack_sg; - stack_sg.ds_addr = map->bus_addr; + stack_sg.ds_addr = map; stack_sg.ds_len = dmat->maxsize; cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0); return (0); @@ -1339,12 +958,6 @@ ahc_dmamap_load(struct ahc_softc *ahc, bus_dma_tag_t dmat, bus_dmamap_t map, void ahc_dmamap_destroy(struct ahc_softc *ahc, bus_dma_tag_t dmat, bus_dmamap_t map) { - /* - * The map may is NULL in our < 2.3.X implementation. - * Now it's 2.6.5, but just in case... - */ - BUG_ON(map == NULL); - free(map, M_DEVBUF); } int @@ -1550,7 +1163,7 @@ __setup("aic7xxx=", aic7xxx_setup); uint32_t aic7xxx_verbose; int -ahc_linux_register_host(struct ahc_softc *ahc, Scsi_Host_Template *template) +ahc_linux_register_host(struct ahc_softc *ahc, struct scsi_host_template *template) { char buf[80]; struct Scsi_Host *host; @@ -1564,11 +1177,7 @@ ahc_linux_register_host(struct ahc_softc *ahc, Scsi_Host_Template *template) *((struct ahc_softc **)host->hostdata) = ahc; ahc_lock(ahc, &s); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) scsi_assign_lock(host, &ahc->platform_data->spin_lock); -#elif AHC_SCSI_HAS_HOST_LOCK != 0 - host->lock = &ahc->platform_data->spin_lock; -#endif ahc->platform_data->host = host; host->can_queue = AHC_MAX_QUEUE; host->cmd_per_lun = 2; @@ -1587,19 +1196,14 @@ ahc_linux_register_host(struct ahc_softc *ahc, Scsi_Host_Template *template) ahc_set_name(ahc, new_name); } host->unique_id = ahc->unit; -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - scsi_set_pci_device(host, ahc->dev_softc); -#endif ahc_linux_initialize_scsi_bus(ahc); ahc_intr_enable(ahc, TRUE); ahc_unlock(ahc, &s); host->transportt = ahc_linux_transport_template; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) scsi_add_host(host, (ahc->dev_softc ? &ahc->dev_softc->dev : NULL)); /* XXX handle failure */ scsi_scan_host(host); -#endif return (0); } @@ -1717,19 +1321,9 @@ ahc_platform_alloc(struct ahc_softc *ahc, void *platform_arg) if (ahc->platform_data == NULL) return (ENOMEM); memset(ahc->platform_data, 0, sizeof(struct ahc_platform_data)); - TAILQ_INIT(&ahc->platform_data->completeq); - TAILQ_INIT(&ahc->platform_data->device_runq); ahc->platform_data->irq = AHC_LINUX_NOIRQ; - ahc->platform_data->hw_dma_mask = 0xFFFFFFFF; ahc_lockinit(ahc); - ahc_done_lockinit(ahc); - init_timer(&ahc->platform_data->completeq_timer); - ahc->platform_data->completeq_timer.data = (u_long)ahc; - ahc->platform_data->completeq_timer.function = - (ahc_linux_callback_t *)ahc_linux_thread_run_complete_queue; init_MUTEX_LOCKED(&ahc->platform_data->eh_sem); - tasklet_init(&ahc->platform_data->runq_tasklet, ahc_runq_tasklet, - (unsigned long)ahc); ahc->seltime = (aic7xxx_seltime & 0x3) << 4; ahc->seltime_b = (aic7xxx_seltime & 0x3) << 4; if (aic7xxx_pci_parity == 0) @@ -1746,12 +1340,8 @@ ahc_platform_free(struct ahc_softc *ahc) int i, j; if (ahc->platform_data != NULL) { - del_timer_sync(&ahc->platform_data->completeq_timer); - tasklet_kill(&ahc->platform_data->runq_tasklet); if (ahc->platform_data->host != NULL) { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) scsi_remove_host(ahc->platform_data->host); -#endif scsi_host_put(ahc->platform_data->host); } @@ -1787,16 +1377,7 @@ ahc_platform_free(struct ahc_softc *ahc) release_mem_region(ahc->platform_data->mem_busaddr, 0x1000); } -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - /* - * In 2.4 we detach from the scsi midlayer before the PCI - * layer invokes our remove callback. No per-instance - * detach is provided, so we must reach inside the PCI - * subsystem's internals and detach our driver manually. - */ - if (ahc->dev_softc != NULL) - ahc->dev_softc->driver = NULL; -#endif + free(ahc->platform_data, M_DEVBUF); } } @@ -1820,7 +1401,7 @@ ahc_platform_set_tags(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, dev = ahc_linux_get_device(ahc, devinfo->channel - 'A', devinfo->target, - devinfo->lun, /*alloc*/FALSE); + devinfo->lun); if (dev == NULL) return; was_queuing = dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED); @@ -1873,7 +1454,6 @@ ahc_platform_set_tags(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, dev->maxtags = 0; dev->openings = 1 - dev->active; } -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) if (dev->scsi_device != NULL) { switch ((dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED))) { case AHC_DEV_Q_BASIC: @@ -1899,90 +1479,13 @@ ahc_platform_set_tags(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, break; } } -#endif } int ahc_platform_abort_scbs(struct ahc_softc *ahc, int target, char channel, int lun, u_int tag, role_t role, uint32_t status) { - int chan; - int maxchan; - int targ; - int maxtarg; - int clun; - int maxlun; - int count; - - if (tag != SCB_LIST_NULL) - return (0); - - chan = 0; - if (channel != ALL_CHANNELS) { - chan = channel - 'A'; - maxchan = chan + 1; - } else { - maxchan = (ahc->features & AHC_TWIN) ? 2 : 1; - } - targ = 0; - if (target != CAM_TARGET_WILDCARD) { - targ = target; - maxtarg = targ + 1; - } else { - maxtarg = (ahc->features & AHC_WIDE) ? 16 : 8; - } - clun = 0; - if (lun != CAM_LUN_WILDCARD) { - clun = lun; - maxlun = clun + 1; - } else { - maxlun = AHC_NUM_LUNS; - } - - count = 0; - for (; chan < maxchan; chan++) { - - for (; targ < maxtarg; targ++) { - - for (; clun < maxlun; clun++) { - struct ahc_linux_device *dev; - struct ahc_busyq *busyq; - struct ahc_cmd *acmd; - - dev = ahc_linux_get_device(ahc, chan, - targ, clun, - /*alloc*/FALSE); - if (dev == NULL) - continue; - - busyq = &dev->busyq; - while ((acmd = TAILQ_FIRST(busyq)) != NULL) { - Scsi_Cmnd *cmd; - - cmd = &acmd_scsi_cmd(acmd); - TAILQ_REMOVE(busyq, acmd, - acmd_links.tqe); - count++; - cmd->result = status << 16; - ahc_linux_queue_cmd_complete(ahc, cmd); - } - } - } - } - - return (count); -} - -static void -ahc_linux_thread_run_complete_queue(struct ahc_softc *ahc) -{ - u_long flags; - - ahc_lock(ahc, &flags); - del_timer(&ahc->platform_data->completeq_timer); - ahc->platform_data->flags &= ~AHC_RUN_CMPLT_Q_TIMER; - ahc_linux_run_complete_queue(ahc); - ahc_unlock(ahc, &flags); + return 0; } static u_int @@ -2045,213 +1548,200 @@ ahc_linux_device_queue_depth(struct ahc_softc *ahc, } } -static void -ahc_linux_run_device_queue(struct ahc_softc *ahc, struct ahc_linux_device *dev) +static int +ahc_linux_run_command(struct ahc_softc *ahc, struct ahc_linux_device *dev, + struct scsi_cmnd *cmd) { - struct ahc_cmd *acmd; - struct scsi_cmnd *cmd; struct scb *scb; struct hardware_scb *hscb; struct ahc_initiator_tinfo *tinfo; struct ahc_tmode_tstate *tstate; uint16_t mask; + struct scb_tailq *untagged_q = NULL; - if ((dev->flags & AHC_DEV_ON_RUN_LIST) != 0) - panic("running device on run list"); + /* + * Schedule us to run later. The only reason we are not + * running is because the whole controller Q is frozen. + */ + if (ahc->platform_data->qfrozen != 0) + return SCSI_MLQUEUE_HOST_BUSY; - while ((acmd = TAILQ_FIRST(&dev->busyq)) != NULL - && dev->openings > 0 && dev->qfrozen == 0) { + /* + * We only allow one untagged transaction + * per target in the initiator role unless + * we are storing a full busy target *lun* + * table in SCB space. + */ + if (!blk_rq_tagged(cmd->request) + && (ahc->features & AHC_SCB_BTT) == 0) { + int target_offset; - /* - * Schedule us to run later. The only reason we are not - * running is because the whole controller Q is frozen. - */ - if (ahc->platform_data->qfrozen != 0) { - TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq, - dev, links); - dev->flags |= AHC_DEV_ON_RUN_LIST; - return; - } - /* - * Get an scb to use. - */ - if ((scb = ahc_get_scb(ahc)) == NULL) { - TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq, - dev, links); - dev->flags |= AHC_DEV_ON_RUN_LIST; - ahc->flags |= AHC_RESOURCE_SHORTAGE; - return; - } - TAILQ_REMOVE(&dev->busyq, acmd, acmd_links.tqe); - cmd = &acmd_scsi_cmd(acmd); - scb->io_ctx = cmd; - scb->platform_data->dev = dev; - hscb = scb->hscb; - cmd->host_scribble = (char *)scb; + target_offset = cmd->device->id + cmd->device->channel * 8; + untagged_q = &(ahc->untagged_queues[target_offset]); + if (!TAILQ_EMPTY(untagged_q)) + /* if we're already executing an untagged command + * we're busy to another */ + return SCSI_MLQUEUE_DEVICE_BUSY; + } - /* - * Fill out basics of the HSCB. - */ - hscb->control = 0; - hscb->scsiid = BUILD_SCSIID(ahc, cmd); - hscb->lun = cmd->device->lun; - mask = SCB_GET_TARGET_MASK(ahc, scb); - tinfo = ahc_fetch_transinfo(ahc, SCB_GET_CHANNEL(ahc, scb), - SCB_GET_OUR_ID(scb), - SCB_GET_TARGET(ahc, scb), &tstate); - hscb->scsirate = tinfo->scsirate; - hscb->scsioffset = tinfo->curr.offset; - if ((tstate->ultraenb & mask) != 0) - hscb->control |= ULTRAENB; - - if ((ahc->user_discenable & mask) != 0) - hscb->control |= DISCENB; - - if ((tstate->auto_negotiate & mask) != 0) { - scb->flags |= SCB_AUTO_NEGOTIATE; - scb->hscb->control |= MK_MESSAGE; - } + /* + * Get an scb to use. + */ + if ((scb = ahc_get_scb(ahc)) == NULL) { + ahc->flags |= AHC_RESOURCE_SHORTAGE; + return SCSI_MLQUEUE_HOST_BUSY; + } - if ((dev->flags & (AHC_DEV_Q_TAGGED|AHC_DEV_Q_BASIC)) != 0) { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - int msg_bytes; - uint8_t tag_msgs[2]; + scb->io_ctx = cmd; + scb->platform_data->dev = dev; + hscb = scb->hscb; + cmd->host_scribble = (char *)scb; - msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs); - if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) { - hscb->control |= tag_msgs[0]; - if (tag_msgs[0] == MSG_ORDERED_TASK) - dev->commands_since_idle_or_otag = 0; - } else -#endif - if (dev->commands_since_idle_or_otag == AHC_OTAG_THRESH - && (dev->flags & AHC_DEV_Q_TAGGED) != 0) { - hscb->control |= MSG_ORDERED_TASK; + /* + * Fill out basics of the HSCB. + */ + hscb->control = 0; + hscb->scsiid = BUILD_SCSIID(ahc, cmd); + hscb->lun = cmd->device->lun; + mask = SCB_GET_TARGET_MASK(ahc, scb); + tinfo = ahc_fetch_transinfo(ahc, SCB_GET_CHANNEL(ahc, scb), + SCB_GET_OUR_ID(scb), + SCB_GET_TARGET(ahc, scb), &tstate); + hscb->scsirate = tinfo->scsirate; + hscb->scsioffset = tinfo->curr.offset; + if ((tstate->ultraenb & mask) != 0) + hscb->control |= ULTRAENB; + + if ((ahc->user_discenable & mask) != 0) + hscb->control |= DISCENB; + + if ((tstate->auto_negotiate & mask) != 0) { + scb->flags |= SCB_AUTO_NEGOTIATE; + scb->hscb->control |= MK_MESSAGE; + } + + if ((dev->flags & (AHC_DEV_Q_TAGGED|AHC_DEV_Q_BASIC)) != 0) { + int msg_bytes; + uint8_t tag_msgs[2]; + + msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs); + if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) { + hscb->control |= tag_msgs[0]; + if (tag_msgs[0] == MSG_ORDERED_TASK) dev->commands_since_idle_or_otag = 0; - } else { - hscb->control |= MSG_SIMPLE_TASK; - } - } - - hscb->cdb_len = cmd->cmd_len; - if (hscb->cdb_len <= 12) { - memcpy(hscb->shared_data.cdb, cmd->cmnd, hscb->cdb_len); + } else if (dev->commands_since_idle_or_otag == AHC_OTAG_THRESH + && (dev->flags & AHC_DEV_Q_TAGGED) != 0) { + hscb->control |= MSG_ORDERED_TASK; + dev->commands_since_idle_or_otag = 0; } else { - memcpy(hscb->cdb32, cmd->cmnd, hscb->cdb_len); - scb->flags |= SCB_CDB32_PTR; + hscb->control |= MSG_SIMPLE_TASK; } + } - scb->platform_data->xfer_len = 0; - ahc_set_residual(scb, 0); - ahc_set_sense_residual(scb, 0); - scb->sg_count = 0; - if (cmd->use_sg != 0) { - struct ahc_dma_seg *sg; - struct scatterlist *cur_seg; - struct scatterlist *end_seg; - int nseg; - - cur_seg = (struct scatterlist *)cmd->request_buffer; - nseg = pci_map_sg(ahc->dev_softc, cur_seg, cmd->use_sg, - cmd->sc_data_direction); - end_seg = cur_seg + nseg; - /* Copy the segments into the SG list. */ - sg = scb->sg_list; - /* - * The sg_count may be larger than nseg if - * a transfer crosses a 32bit page. - */ - while (cur_seg < end_seg) { - dma_addr_t addr; - bus_size_t len; - int consumed; - - addr = sg_dma_address(cur_seg); - len = sg_dma_len(cur_seg); - consumed = ahc_linux_map_seg(ahc, scb, - sg, addr, len); - sg += consumed; - scb->sg_count += consumed; - cur_seg++; - } - sg--; - sg->len |= ahc_htole32(AHC_DMA_LAST_SEG); - - /* - * Reset the sg list pointer. - */ - scb->hscb->sgptr = - ahc_htole32(scb->sg_list_phys | SG_FULL_RESID); + hscb->cdb_len = cmd->cmd_len; + if (hscb->cdb_len <= 12) { + memcpy(hscb->shared_data.cdb, cmd->cmnd, hscb->cdb_len); + } else { + memcpy(hscb->cdb32, cmd->cmnd, hscb->cdb_len); + scb->flags |= SCB_CDB32_PTR; + } - /* - * Copy the first SG into the "current" - * data pointer area. - */ - scb->hscb->dataptr = scb->sg_list->addr; - scb->hscb->datacnt = scb->sg_list->len; - } else if (cmd->request_bufflen != 0) { - struct ahc_dma_seg *sg; + scb->platform_data->xfer_len = 0; + ahc_set_residual(scb, 0); + ahc_set_sense_residual(scb, 0); + scb->sg_count = 0; + if (cmd->use_sg != 0) { + struct ahc_dma_seg *sg; + struct scatterlist *cur_seg; + struct scatterlist *end_seg; + int nseg; + + cur_seg = (struct scatterlist *)cmd->request_buffer; + nseg = pci_map_sg(ahc->dev_softc, cur_seg, cmd->use_sg, + cmd->sc_data_direction); + end_seg = cur_seg + nseg; + /* Copy the segments into the SG list. */ + sg = scb->sg_list; + /* + * The sg_count may be larger than nseg if + * a transfer crosses a 32bit page. + */ + while (cur_seg < end_seg) { dma_addr_t addr; - - sg = scb->sg_list; - addr = pci_map_single(ahc->dev_softc, - cmd->request_buffer, - cmd->request_bufflen, - cmd->sc_data_direction); - scb->platform_data->buf_busaddr = addr; - scb->sg_count = ahc_linux_map_seg(ahc, scb, - sg, addr, - cmd->request_bufflen); - sg->len |= ahc_htole32(AHC_DMA_LAST_SEG); - - /* - * Reset the sg list pointer. - */ - scb->hscb->sgptr = - ahc_htole32(scb->sg_list_phys | SG_FULL_RESID); - - /* - * Copy the first SG into the "current" - * data pointer area. - */ - scb->hscb->dataptr = sg->addr; - scb->hscb->datacnt = sg->len; - } else { - scb->hscb->sgptr = ahc_htole32(SG_LIST_NULL); - scb->hscb->dataptr = 0; - scb->hscb->datacnt = 0; - scb->sg_count = 0; + bus_size_t len; + int consumed; + + addr = sg_dma_address(cur_seg); + len = sg_dma_len(cur_seg); + consumed = ahc_linux_map_seg(ahc, scb, + sg, addr, len); + sg += consumed; + scb->sg_count += consumed; + cur_seg++; } + sg--; + sg->len |= ahc_htole32(AHC_DMA_LAST_SEG); - ahc_sync_sglist(ahc, scb, BUS_DMASYNC_PREWRITE); - LIST_INSERT_HEAD(&ahc->pending_scbs, scb, pending_links); - dev->openings--; - dev->active++; - dev->commands_issued++; - if ((dev->flags & AHC_DEV_PERIODIC_OTAG) != 0) - dev->commands_since_idle_or_otag++; + /* + * Reset the sg list pointer. + */ + scb->hscb->sgptr = + ahc_htole32(scb->sg_list_phys | SG_FULL_RESID); + + /* + * Copy the first SG into the "current" + * data pointer area. + */ + scb->hscb->dataptr = scb->sg_list->addr; + scb->hscb->datacnt = scb->sg_list->len; + } else if (cmd->request_bufflen != 0) { + struct ahc_dma_seg *sg; + dma_addr_t addr; + + sg = scb->sg_list; + addr = pci_map_single(ahc->dev_softc, + cmd->request_buffer, + cmd->request_bufflen, + cmd->sc_data_direction); + scb->platform_data->buf_busaddr = addr; + scb->sg_count = ahc_linux_map_seg(ahc, scb, + sg, addr, + cmd->request_bufflen); + sg->len |= ahc_htole32(AHC_DMA_LAST_SEG); /* - * We only allow one untagged transaction - * per target in the initiator role unless - * we are storing a full busy target *lun* - * table in SCB space. + * Reset the sg list pointer. */ - if ((scb->hscb->control & (TARGET_SCB|TAG_ENB)) == 0 - && (ahc->features & AHC_SCB_BTT) == 0) { - struct scb_tailq *untagged_q; - int target_offset; - - target_offset = SCB_GET_TARGET_OFFSET(ahc, scb); - untagged_q = &(ahc->untagged_queues[target_offset]); - TAILQ_INSERT_TAIL(untagged_q, scb, links.tqe); - scb->flags |= SCB_UNTAGGEDQ; - if (TAILQ_FIRST(untagged_q) != scb) - continue; - } - scb->flags |= SCB_ACTIVE; - ahc_queue_scb(ahc, scb); + scb->hscb->sgptr = + ahc_htole32(scb->sg_list_phys | SG_FULL_RESID); + + /* + * Copy the first SG into the "current" + * data pointer area. + */ + scb->hscb->dataptr = sg->addr; + scb->hscb->datacnt = sg->len; + } else { + scb->hscb->sgptr = ahc_htole32(SG_LIST_NULL); + scb->hscb->dataptr = 0; + scb->hscb->datacnt = 0; + scb->sg_count = 0; } + + LIST_INSERT_HEAD(&ahc->pending_scbs, scb, pending_links); + dev->openings--; + dev->active++; + dev->commands_issued++; + if ((dev->flags & AHC_DEV_PERIODIC_OTAG) != 0) + dev->commands_since_idle_or_otag++; + + scb->flags |= SCB_ACTIVE; + if (untagged_q) { + TAILQ_INSERT_TAIL(untagged_q, scb, links.tqe); + scb->flags |= SCB_UNTAGGEDQ; + } + ahc_queue_scb(ahc, scb); + return 0; } /* @@ -2267,9 +1757,6 @@ ahc_linux_isr(int irq, void *dev_id, struct pt_regs * regs) ahc = (struct ahc_softc *) dev_id; ahc_lock(ahc, &flags); ours = ahc_intr(ahc); - if (ahc_linux_next_device_to_run(ahc) != NULL) - ahc_schedule_runq(ahc); - ahc_linux_run_complete_queue(ahc); ahc_unlock(ahc, &flags); return IRQ_RETVAL(ours); } @@ -2278,8 +1765,6 @@ void ahc_platform_flushwork(struct ahc_softc *ahc) { - while (ahc_linux_run_complete_queue(ahc) != NULL) - ; } static struct ahc_linux_target* @@ -2348,9 +1833,6 @@ ahc_linux_alloc_device(struct ahc_softc *ahc, if (dev == NULL) return (NULL); memset(dev, 0, sizeof(*dev)); - init_timer(&dev->timer); - TAILQ_INIT(&dev->busyq); - dev->flags = AHC_DEV_UNCONFIGURED; dev->lun = lun; dev->target = targ; @@ -2373,7 +1855,7 @@ ahc_linux_alloc_device(struct ahc_softc *ahc, } static void -__ahc_linux_free_device(struct ahc_softc *ahc, struct ahc_linux_device *dev) +ahc_linux_free_device(struct ahc_softc *ahc, struct ahc_linux_device *dev) { struct ahc_linux_target *targ; @@ -2385,13 +1867,6 @@ __ahc_linux_free_device(struct ahc_softc *ahc, struct ahc_linux_device *dev) ahc_linux_free_target(ahc, targ); } -static void -ahc_linux_free_device(struct ahc_softc *ahc, struct ahc_linux_device *dev) -{ - del_timer_sync(&dev->timer); - __ahc_linux_free_device(ahc, dev); -} - void ahc_send_async(struct ahc_softc *ahc, char channel, u_int target, u_int lun, ac_code code, void *arg) @@ -2463,28 +1938,9 @@ ahc_send_async(struct ahc_softc *ahc, char channel, } case AC_SENT_BDR: { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) WARN_ON(lun != CAM_LUN_WILDCARD); scsi_report_device_reset(ahc->platform_data->host, channel - 'A', target); -#else - Scsi_Device *scsi_dev; - - /* - * Find the SCSI device associated with this - * request and indicate that a UA is expected. - */ - for (scsi_dev = ahc->platform_data->host->host_queue; - scsi_dev != NULL; scsi_dev = scsi_dev->next) { - if (channel - 'A' == scsi_dev->channel - && target == scsi_dev->id - && (lun == CAM_LUN_WILDCARD - || lun == scsi_dev->lun)) { - scsi_dev->was_reset = 1; - scsi_dev->expecting_cc_ua = 1; - } - } -#endif break; } case AC_BUS_RESET: @@ -2504,7 +1960,7 @@ ahc_send_async(struct ahc_softc *ahc, char channel, void ahc_done(struct ahc_softc *ahc, struct scb *scb) { - Scsi_Cmnd *cmd; + struct scsi_cmnd *cmd; struct ahc_linux_device *dev; LIST_REMOVE(scb, pending_links); @@ -2515,7 +1971,7 @@ ahc_done(struct ahc_softc *ahc, struct scb *scb) target_offset = SCB_GET_TARGET_OFFSET(ahc, scb); untagged_q = &(ahc->untagged_queues[target_offset]); TAILQ_REMOVE(untagged_q, scb, links.tqe); - ahc_run_untagged_queue(ahc, untagged_q); + BUG_ON(!TAILQ_EMPTY(untagged_q)); } if ((scb->flags & SCB_ACTIVE) == 0) { @@ -2583,8 +2039,6 @@ ahc_done(struct ahc_softc *ahc, struct scb *scb) } } else if (ahc_get_transaction_status(scb) == CAM_SCSI_STATUS_ERROR) { ahc_linux_handle_scsi_status(ahc, dev, scb); - } else if (ahc_get_transaction_status(scb) == CAM_SEL_TIMEOUT) { - dev->flags |= AHC_DEV_UNCONFIGURED; } if (dev->openings == 1 @@ -2606,16 +2060,6 @@ ahc_done(struct ahc_softc *ahc, struct scb *scb) if (dev->active == 0) dev->commands_since_idle_or_otag = 0; - if (TAILQ_EMPTY(&dev->busyq)) { - if ((dev->flags & AHC_DEV_UNCONFIGURED) != 0 - && dev->active == 0 - && (dev->flags & AHC_DEV_TIMER_ACTIVE) == 0) - ahc_linux_free_device(ahc, dev); - } else if ((dev->flags & AHC_DEV_ON_RUN_LIST) == 0) { - TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq, dev, links); - dev->flags |= AHC_DEV_ON_RUN_LIST; - } - if ((scb->flags & SCB_RECOVERY_SCB) != 0) { printf("Recovery SCB completes\n"); if (ahc_get_transaction_status(scb) == CAM_BDR_SENT @@ -2659,7 +2103,7 @@ ahc_linux_handle_scsi_status(struct ahc_softc *ahc, case SCSI_STATUS_CHECK_COND: case SCSI_STATUS_CMD_TERMINATED: { - Scsi_Cmnd *cmd; + struct scsi_cmnd *cmd; /* * Copy sense information to the OS's cmd @@ -2754,52 +2198,15 @@ ahc_linux_handle_scsi_status(struct ahc_softc *ahc, ahc_platform_set_tags(ahc, &devinfo, (dev->flags & AHC_DEV_Q_BASIC) ? AHC_QUEUE_BASIC : AHC_QUEUE_TAGGED); - /* FALLTHROUGH */ - } - case SCSI_STATUS_BUSY: - { - /* - * Set a short timer to defer sending commands for - * a bit since Linux will not delay in this case. - */ - if ((dev->flags & AHC_DEV_TIMER_ACTIVE) != 0) { - printf("%s:%c:%d: Device Timer still active during " - "busy processing\n", ahc_name(ahc), - dev->target->channel, dev->target->target); - break; - } - dev->flags |= AHC_DEV_TIMER_ACTIVE; - dev->qfrozen++; - init_timer(&dev->timer); - dev->timer.data = (u_long)dev; - dev->timer.expires = jiffies + (HZ/2); - dev->timer.function = ahc_linux_dev_timed_unfreeze; - add_timer(&dev->timer); break; } } } static void -ahc_linux_queue_cmd_complete(struct ahc_softc *ahc, Scsi_Cmnd *cmd) +ahc_linux_queue_cmd_complete(struct ahc_softc *ahc, struct scsi_cmnd *cmd) { /* - * Typically, the complete queue has very few entries - * queued to it before the queue is emptied by - * ahc_linux_run_complete_queue, so sorting the entries - * by generation number should be inexpensive. - * We perform the sort so that commands that complete - * with an error are retuned in the order origionally - * queued to the controller so that any subsequent retries - * are performed in order. The underlying ahc routines do - * not guarantee the order that aborted commands will be - * returned to us. - */ - struct ahc_completeq *completeq; - struct ahc_cmd *list_cmd; - struct ahc_cmd *acmd; - - /* * Map CAM error codes into Linux Error codes. We * avoid the conversion so that the DV code has the * full error information available when making @@ -2852,26 +2259,7 @@ ahc_linux_queue_cmd_complete(struct ahc_softc *ahc, Scsi_Cmnd *cmd) new_status = DID_ERROR; break; case CAM_REQUEUE_REQ: - /* - * If we want the request requeued, make sure there - * are sufficent retries. In the old scsi error code, - * we used to be able to specify a result code that - * bypassed the retry count. Now we must use this - * hack. We also "fake" a check condition with - * a sense code of ABORTED COMMAND. This seems to - * evoke a retry even if this command is being sent - * via the eh thread. Ick! Ick! Ick! - */ - if (cmd->retries > 0) - cmd->retries--; - new_status = DID_OK; - ahc_cmd_set_scsi_status(cmd, SCSI_STATUS_CHECK_COND); - cmd->result |= (DRIVER_SENSE << 24); - memset(cmd->sense_buffer, 0, - sizeof(cmd->sense_buffer)); - cmd->sense_buffer[0] = SSD_ERRCODE_VALID - | SSD_CURRENT_ERROR; - cmd->sense_buffer[2] = SSD_KEY_ABORTED_COMMAND; + new_status = DID_REQUEUE; break; default: /* We should never get here */ @@ -2882,17 +2270,7 @@ ahc_linux_queue_cmd_complete(struct ahc_softc *ahc, Scsi_Cmnd *cmd) ahc_cmd_set_transaction_status(cmd, new_status); } - completeq = &ahc->platform_data->completeq; - list_cmd = TAILQ_FIRST(completeq); - acmd = (struct ahc_cmd *)cmd; - while (list_cmd != NULL - && acmd_scsi_cmd(list_cmd).serial_number - < acmd_scsi_cmd(acmd).serial_number) - list_cmd = TAILQ_NEXT(list_cmd, acmd_links.tqe); - if (list_cmd != NULL) - TAILQ_INSERT_BEFORE(list_cmd, acmd, acmd_links.tqe); - else - TAILQ_INSERT_TAIL(completeq, acmd, acmd_links.tqe); + cmd->scsi_done(cmd); } static void @@ -2940,7 +2318,6 @@ ahc_linux_release_simq(u_long arg) ahc->platform_data->qfrozen--; if (ahc->platform_data->qfrozen == 0) unblock_reqs = 1; - ahc_schedule_runq(ahc); ahc_unlock(ahc, &s); /* * There is still a race here. The mid-layer @@ -2952,37 +2329,12 @@ ahc_linux_release_simq(u_long arg) scsi_unblock_requests(ahc->platform_data->host); } -static void -ahc_linux_dev_timed_unfreeze(u_long arg) -{ - struct ahc_linux_device *dev; - struct ahc_softc *ahc; - u_long s; - - dev = (struct ahc_linux_device *)arg; - ahc = dev->target->ahc; - ahc_lock(ahc, &s); - dev->flags &= ~AHC_DEV_TIMER_ACTIVE; - if (dev->qfrozen > 0) - dev->qfrozen--; - if (dev->qfrozen == 0 - && (dev->flags & AHC_DEV_ON_RUN_LIST) == 0) - ahc_linux_run_device_queue(ahc, dev); - if (TAILQ_EMPTY(&dev->busyq) - && dev->active == 0) - __ahc_linux_free_device(ahc, dev); - ahc_unlock(ahc, &s); -} - static int -ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag) +ahc_linux_queue_recovery_cmd(struct scsi_cmnd *cmd, scb_flag flag) { struct ahc_softc *ahc; - struct ahc_cmd *acmd; - struct ahc_cmd *list_acmd; struct ahc_linux_device *dev; struct scb *pending_scb; - u_long s; u_int saved_scbptr; u_int active_scb_index; u_int last_phase; @@ -2998,7 +2350,6 @@ ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag) paused = FALSE; wait = FALSE; ahc = *(struct ahc_softc **)cmd->device->host->hostdata; - acmd = (struct ahc_cmd *)cmd; printf("%s:%d:%d:%d: Attempting to queue a%s message\n", ahc_name(ahc), cmd->device->channel, @@ -3011,22 +2362,6 @@ ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag) printf("\n"); /* - * In all versions of Linux, we have to work around - * a major flaw in how the mid-layer is locked down - * if we are to sleep successfully in our error handler - * while allowing our interrupt handler to run. Since - * the midlayer acquires either the io_request_lock or - * our lock prior to calling us, we must use the - * spin_unlock_irq() method for unlocking our lock. - * This will force interrupts to be enabled on the - * current CPU. Since the EH thread should not have - * been running with CPU interrupts disabled other than - * by acquiring either the io_request_lock or our own - * lock, this *should* be safe. - */ - ahc_midlayer_entrypoint_lock(ahc, &s); - - /* * First determine if we currently own this command. * Start by searching the device queue. If not found * there, check the pending_scb list. If not found @@ -3034,7 +2369,7 @@ ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag) * command, return success. */ dev = ahc_linux_get_device(ahc, cmd->device->channel, cmd->device->id, - cmd->device->lun, /*alloc*/FALSE); + cmd->device->lun); if (dev == NULL) { /* @@ -3048,24 +2383,6 @@ ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag) goto no_cmd; } - TAILQ_FOREACH(list_acmd, &dev->busyq, acmd_links.tqe) { - if (list_acmd == acmd) - break; - } - - if (list_acmd != NULL) { - printf("%s:%d:%d:%d: Command found on device queue\n", - ahc_name(ahc), cmd->device->channel, cmd->device->id, - cmd->device->lun); - if (flag == SCB_ABORT) { - TAILQ_REMOVE(&dev->busyq, list_acmd, acmd_links.tqe); - cmd->result = DID_ABORT << 16; - ahc_linux_queue_cmd_complete(ahc, cmd); - retval = SUCCESS; - goto done; - } - } - if ((dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED)) == 0 && ahc_search_untagged_queues(ahc, cmd, cmd->device->id, cmd->device->channel + 'A', @@ -3299,53 +2616,42 @@ done: } spin_lock_irq(&ahc->platform_data->spin_lock); } - ahc_schedule_runq(ahc); - ahc_linux_run_complete_queue(ahc); - ahc_midlayer_entrypoint_unlock(ahc, &s); return (retval); } void ahc_platform_dump_card_state(struct ahc_softc *ahc) { - struct ahc_linux_device *dev; - int channel; - int maxchannel; - int target; - int maxtarget; - int lun; - int i; - - maxchannel = (ahc->features & AHC_TWIN) ? 1 : 0; - maxtarget = (ahc->features & AHC_WIDE) ? 15 : 7; - for (channel = 0; channel <= maxchannel; channel++) { +} - for (target = 0; target <=maxtarget; target++) { +static void ahc_linux_exit(void); - for (lun = 0; lun < AHC_NUM_LUNS; lun++) { - struct ahc_cmd *acmd; +static void ahc_linux_get_width(struct scsi_target *starget) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata); + struct ahc_tmode_tstate *tstate; + struct ahc_initiator_tinfo *tinfo + = ahc_fetch_transinfo(ahc, + starget->channel + 'A', + shost->this_id, starget->id, &tstate); + spi_width(starget) = tinfo->curr.width; +} - dev = ahc_linux_get_device(ahc, channel, target, - lun, /*alloc*/FALSE); - if (dev == NULL) - continue; +static void ahc_linux_set_width(struct scsi_target *starget, int width) +{ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata); + struct ahc_devinfo devinfo; + unsigned long flags; - printf("DevQ(%d:%d:%d): ", - channel, target, lun); - i = 0; - TAILQ_FOREACH(acmd, &dev->busyq, - acmd_links.tqe) { - if (i++ > AHC_SCB_MAX) - break; - } - printf("%d waiting\n", i); - } - } - } + ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, + starget->channel + 'A', ROLE_INITIATOR); + ahc_lock(ahc, &flags); + ahc_set_width(ahc, &devinfo, width, AHC_TRANS_GOAL, FALSE); + ahc_unlock(ahc, &flags); } -static void ahc_linux_exit(void); - static void ahc_linux_get_period(struct scsi_target *starget) { struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); @@ -3376,8 +2682,21 @@ static void ahc_linux_set_period(struct scsi_target *starget, int period) if (offset == 0) offset = MAX_OFFSET; + if (period < 9) + period = 9; /* 12.5ns is our minimum */ + if (period == 9) + ppr_options |= MSG_EXT_PPR_DT_REQ; + ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, starget->channel + 'A', ROLE_INITIATOR); + + /* all PPR requests apart from QAS require wide transfers */ + if (ppr_options & ~MSG_EXT_PPR_QAS_REQ) { + ahc_linux_get_width(starget); + if (spi_width(starget) == 0) + ppr_options &= MSG_EXT_PPR_QAS_REQ; + } + syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, AHC_SYNCRATE_DT); ahc_lock(ahc, &flags); ahc_set_syncrate(ahc, &devinfo, syncrate, period, offset, @@ -3425,32 +2744,6 @@ static void ahc_linux_set_offset(struct scsi_target *starget, int offset) ahc_unlock(ahc, &flags); } -static void ahc_linux_get_width(struct scsi_target *starget) -{ - struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); - struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata); - struct ahc_tmode_tstate *tstate; - struct ahc_initiator_tinfo *tinfo - = ahc_fetch_transinfo(ahc, - starget->channel + 'A', - shost->this_id, starget->id, &tstate); - spi_width(starget) = tinfo->curr.width; -} - -static void ahc_linux_set_width(struct scsi_target *starget, int width) -{ - struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); - struct ahc_softc *ahc = *((struct ahc_softc **)shost->hostdata); - struct ahc_devinfo devinfo; - unsigned long flags; - - ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, - starget->channel + 'A', ROLE_INITIATOR); - ahc_lock(ahc, &flags); - ahc_set_width(ahc, &devinfo, width, AHC_TRANS_GOAL, FALSE); - ahc_unlock(ahc, &flags); -} - static void ahc_linux_get_dt(struct scsi_target *starget) { struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); @@ -3479,10 +2772,15 @@ static void ahc_linux_set_dt(struct scsi_target *starget, int dt) unsigned long flags; struct ahc_syncrate *syncrate; + if (dt) { + period = 9; /* 12.5ns is the only period valid for DT */ + ppr_options |= MSG_EXT_PPR_DT_REQ; + } else if (period == 9) + period = 10; /* if resetting DT, period must be >= 25ns */ + ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, starget->channel + 'A', ROLE_INITIATOR); - syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, - dt ? AHC_SYNCRATE_DT : AHC_SYNCRATE_ULTRA2); + syncrate = ahc_find_syncrate(ahc, &period, &ppr_options,AHC_SYNCRATE_DT); ahc_lock(ahc, &flags); ahc_set_syncrate(ahc, &devinfo, syncrate, period, tinfo->curr.offset, ppr_options, AHC_TRANS_GOAL, FALSE); @@ -3514,7 +2812,6 @@ static void ahc_linux_set_qas(struct scsi_target *starget, int qas) unsigned int ppr_options = tinfo->curr.ppr_options & ~MSG_EXT_PPR_QAS_REQ; unsigned int period = tinfo->curr.period; - unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; unsigned long flags; struct ahc_syncrate *syncrate; @@ -3523,8 +2820,7 @@ static void ahc_linux_set_qas(struct scsi_target *starget, int qas) ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, starget->channel + 'A', ROLE_INITIATOR); - syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, - dt ? AHC_SYNCRATE_DT : AHC_SYNCRATE_ULTRA2); + syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, AHC_SYNCRATE_DT); ahc_lock(ahc, &flags); ahc_set_syncrate(ahc, &devinfo, syncrate, period, tinfo->curr.offset, ppr_options, AHC_TRANS_GOAL, FALSE); @@ -3556,7 +2852,6 @@ static void ahc_linux_set_iu(struct scsi_target *starget, int iu) unsigned int ppr_options = tinfo->curr.ppr_options & ~MSG_EXT_PPR_IU_REQ; unsigned int period = tinfo->curr.period; - unsigned int dt = ppr_options & MSG_EXT_PPR_DT_REQ; unsigned long flags; struct ahc_syncrate *syncrate; @@ -3565,8 +2860,7 @@ static void ahc_linux_set_iu(struct scsi_target *starget, int iu) ahc_compile_devinfo(&devinfo, shost->this_id, starget->id, 0, starget->channel + 'A', ROLE_INITIATOR); - syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, - dt ? AHC_SYNCRATE_DT : AHC_SYNCRATE_ULTRA2); + syncrate = ahc_find_syncrate(ahc, &period, &ppr_options, AHC_SYNCRATE_DT); ahc_lock(ahc, &flags); ahc_set_syncrate(ahc, &devinfo, syncrate, period, tinfo->curr.offset, ppr_options, AHC_TRANS_GOAL, FALSE); @@ -3599,7 +2893,6 @@ static struct spi_function_template ahc_linux_transport_functions = { static int __init ahc_linux_init(void) { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) ahc_linux_transport_template = spi_attach_transport(&ahc_linux_transport_functions); if (!ahc_linux_transport_template) return -ENODEV; @@ -3608,29 +2901,11 @@ ahc_linux_init(void) spi_release_transport(ahc_linux_transport_template); ahc_linux_exit(); return -ENODEV; -#else - scsi_register_module(MODULE_SCSI_HA, &aic7xxx_driver_template); - if (aic7xxx_driver_template.present == 0) { - scsi_unregister_module(MODULE_SCSI_HA, - &aic7xxx_driver_template); - return (-ENODEV); - } - - return (0); -#endif } static void ahc_linux_exit(void) { -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - /* - * In 2.4 we have to unregister from the PCI core _after_ - * unregistering from the scsi midlayer to avoid dangling - * references. - */ - scsi_unregister_module(MODULE_SCSI_HA, &aic7xxx_driver_template); -#endif ahc_linux_pci_exit(); ahc_linux_eisa_exit(); spi_release_transport(ahc_linux_transport_template); diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.h b/drivers/scsi/aic7xxx/aic7xxx_osm.h index ed9027bd8a4..30c200d5bcd 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm.h +++ b/drivers/scsi/aic7xxx/aic7xxx_osm.h @@ -59,6 +59,7 @@ #ifndef _AIC7XXX_LINUX_H_ #define _AIC7XXX_LINUX_H_ +#include <linux/config.h> #include <linux/types.h> #include <linux/blkdev.h> #include <linux/delay.h> @@ -66,18 +67,21 @@ #include <linux/pci.h> #include <linux/smp_lock.h> #include <linux/version.h> +#include <linux/interrupt.h> #include <linux/module.h> +#include <linux/slab.h> #include <asm/byteorder.h> #include <asm/io.h> -#include <linux/interrupt.h> /* For tasklet support. */ -#include <linux/config.h> -#include <linux/slab.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_eh.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> /* Core SCSI definitions */ #define AIC_LIB_PREFIX ahc -#include "scsi.h" -#include <scsi/scsi_host.h> /* Name space conflict with BSD queue macros */ #ifdef LIST_HEAD @@ -106,7 +110,7 @@ /************************* Forward Declarations *******************************/ struct ahc_softc; typedef struct pci_dev *ahc_dev_softc_t; -typedef Scsi_Cmnd *ahc_io_ctx_t; +typedef struct scsi_cmnd *ahc_io_ctx_t; /******************************* Byte Order ***********************************/ #define ahc_htobe16(x) cpu_to_be16(x) @@ -144,7 +148,7 @@ typedef Scsi_Cmnd *ahc_io_ctx_t; extern u_int aic7xxx_no_probe; extern u_int aic7xxx_allow_memio; extern int aic7xxx_detect_complete; -extern Scsi_Host_Template aic7xxx_driver_template; +extern struct scsi_host_template aic7xxx_driver_template; /***************************** Bus Space/DMA **********************************/ @@ -174,11 +178,7 @@ struct ahc_linux_dma_tag }; typedef struct ahc_linux_dma_tag* bus_dma_tag_t; -struct ahc_linux_dmamap -{ - dma_addr_t bus_addr; -}; -typedef struct ahc_linux_dmamap* bus_dmamap_t; +typedef dma_addr_t bus_dmamap_t; typedef int bus_dma_filter_t(void*, dma_addr_t); typedef void bus_dmamap_callback_t(void *, bus_dma_segment_t *, int, int); @@ -281,12 +281,6 @@ ahc_scb_timer_reset(struct scb *scb, u_int usec) /***************************** SMP support ************************************/ #include <linux/spinlock.h> -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) || defined(SCSI_HAS_HOST_LOCK)) -#define AHC_SCSI_HAS_HOST_LOCK 1 -#else -#define AHC_SCSI_HAS_HOST_LOCK 0 -#endif - #define AIC7XXX_DRIVER_VERSION "6.2.36" /**************************** Front End Queues ********************************/ @@ -328,20 +322,15 @@ struct ahc_cmd { */ TAILQ_HEAD(ahc_busyq, ahc_cmd); typedef enum { - AHC_DEV_UNCONFIGURED = 0x01, AHC_DEV_FREEZE_TIL_EMPTY = 0x02, /* Freeze queue until active == 0 */ - AHC_DEV_TIMER_ACTIVE = 0x04, /* Our timer is active */ - AHC_DEV_ON_RUN_LIST = 0x08, /* Queued to be run later */ AHC_DEV_Q_BASIC = 0x10, /* Allow basic device queuing */ AHC_DEV_Q_TAGGED = 0x20, /* Allow full SCSI2 command queueing */ AHC_DEV_PERIODIC_OTAG = 0x40, /* Send OTAG to prevent starvation */ - AHC_DEV_SLAVE_CONFIGURED = 0x80 /* slave_configure() has been called */ } ahc_linux_dev_flags; struct ahc_linux_target; struct ahc_linux_device { TAILQ_ENTRY(ahc_linux_device) links; - struct ahc_busyq busyq; /* * The number of transactions currently @@ -382,11 +371,6 @@ struct ahc_linux_device { ahc_linux_dev_flags flags; /* - * Per device timer. - */ - struct timer_list timer; - - /* * The high limit for the tags variable. */ u_int maxtags; @@ -419,7 +403,7 @@ struct ahc_linux_device { #define AHC_OTAG_THRESH 500 int lun; - Scsi_Device *scsi_device; + struct scsi_device *scsi_device; struct ahc_linux_target *target; }; @@ -439,32 +423,16 @@ struct ahc_linux_target { * manner and are allocated below 4GB, the number of S/G segments is * unrestricted. */ -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -/* - * We dynamically adjust the number of segments in pre-2.5 kernels to - * avoid fragmentation issues in the SCSI mid-layer's private memory - * allocator. See aic7xxx_osm.c ahc_linux_size_nseg() for details. - */ -extern u_int ahc_linux_nseg; -#define AHC_NSEG ahc_linux_nseg -#define AHC_LINUX_MIN_NSEG 64 -#else #define AHC_NSEG 128 -#endif /* * Per-SCB OSM storage. */ -typedef enum { - AHC_UP_EH_SEMAPHORE = 0x1 -} ahc_linux_scb_flags; - struct scb_platform_data { struct ahc_linux_device *dev; dma_addr_t buf_busaddr; uint32_t xfer_len; uint32_t sense_resid; /* Auto-Sense residual */ - ahc_linux_scb_flags flags; }; /* @@ -473,39 +441,24 @@ struct scb_platform_data { * alignment restrictions of the various platforms supported by * this driver. */ -typedef enum { - AHC_RUN_CMPLT_Q_TIMER = 0x10 -} ahc_linux_softc_flags; - -TAILQ_HEAD(ahc_completeq, ahc_cmd); - struct ahc_platform_data { /* * Fields accessed from interrupt context. */ struct ahc_linux_target *targets[AHC_NUM_TARGETS]; - TAILQ_HEAD(, ahc_linux_device) device_runq; - struct ahc_completeq completeq; spinlock_t spin_lock; - struct tasklet_struct runq_tasklet; u_int qfrozen; - pid_t dv_pid; - struct timer_list completeq_timer; struct timer_list reset_timer; struct semaphore eh_sem; - struct semaphore dv_sem; - struct semaphore dv_cmd_sem; /* XXX This needs to be in - * the target struct - */ - struct scsi_device *dv_scsi_dev; struct Scsi_Host *host; /* pointer to scsi host */ #define AHC_LINUX_NOIRQ ((uint32_t)~0) uint32_t irq; /* IRQ for this adapter */ uint32_t bios_address; uint32_t mem_busaddr; /* Mem Base Addr */ - uint64_t hw_dma_mask; - ahc_linux_softc_flags flags; + +#define AHC_UP_EH_SEMAPHORE 0x1 + uint32_t flags; }; /************************** OS Utility Wrappers *******************************/ @@ -594,7 +547,7 @@ ahc_insb(struct ahc_softc * ahc, long port, uint8_t *array, int count) /**************************** Initialization **********************************/ int ahc_linux_register_host(struct ahc_softc *, - Scsi_Host_Template *); + struct scsi_host_template *); uint64_t ahc_linux_get_memsize(void); @@ -615,17 +568,6 @@ static __inline void ahc_lockinit(struct ahc_softc *); static __inline void ahc_lock(struct ahc_softc *, unsigned long *flags); static __inline void ahc_unlock(struct ahc_softc *, unsigned long *flags); -/* Lock acquisition and release of the above lock in midlayer entry points. */ -static __inline void ahc_midlayer_entrypoint_lock(struct ahc_softc *, - unsigned long *flags); -static __inline void ahc_midlayer_entrypoint_unlock(struct ahc_softc *, - unsigned long *flags); - -/* Lock held during command compeletion to the upper layer */ -static __inline void ahc_done_lockinit(struct ahc_softc *); -static __inline void ahc_done_lock(struct ahc_softc *, unsigned long *flags); -static __inline void ahc_done_unlock(struct ahc_softc *, unsigned long *flags); - /* Lock held during ahc_list manipulation and ahc softc frees */ extern spinlock_t ahc_list_spinlock; static __inline void ahc_list_lockinit(void); @@ -651,57 +593,6 @@ ahc_unlock(struct ahc_softc *ahc, unsigned long *flags) } static __inline void -ahc_midlayer_entrypoint_lock(struct ahc_softc *ahc, unsigned long *flags) -{ - /* - * In 2.5.X and some 2.4.X versions, the midlayer takes our - * lock just before calling us, so we avoid locking again. - * For other kernel versions, the io_request_lock is taken - * just before our entry point is called. In this case, we - * trade the io_request_lock for our per-softc lock. - */ -#if AHC_SCSI_HAS_HOST_LOCK == 0 - spin_unlock(&io_request_lock); - spin_lock(&ahc->platform_data->spin_lock); -#endif -} - -static __inline void -ahc_midlayer_entrypoint_unlock(struct ahc_softc *ahc, unsigned long *flags) -{ -#if AHC_SCSI_HAS_HOST_LOCK == 0 - spin_unlock(&ahc->platform_data->spin_lock); - spin_lock(&io_request_lock); -#endif -} - -static __inline void -ahc_done_lockinit(struct ahc_softc *ahc) -{ - /* - * In 2.5.X, our own lock is held during completions. - * In previous versions, the io_request_lock is used. - * In either case, we can't initialize this lock again. - */ -} - -static __inline void -ahc_done_lock(struct ahc_softc *ahc, unsigned long *flags) -{ -#if AHC_SCSI_HAS_HOST_LOCK == 0 - spin_lock_irqsave(&io_request_lock, *flags); -#endif -} - -static __inline void -ahc_done_unlock(struct ahc_softc *ahc, unsigned long *flags) -{ -#if AHC_SCSI_HAS_HOST_LOCK == 0 - spin_unlock_irqrestore(&io_request_lock, *flags); -#endif -} - -static __inline void ahc_list_lockinit(void) { spin_lock_init(&ahc_list_spinlock); @@ -767,12 +658,6 @@ typedef enum } ahc_power_state; /**************************** VL/EISA Routines ********************************/ -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) \ - && (defined(__i386__) || defined(__alpha__)) \ - && (!defined(CONFIG_EISA))) -#define CONFIG_EISA -#endif - #ifdef CONFIG_EISA extern uint32_t aic7xxx_probe_eisa_vl; int ahc_linux_eisa_init(void); @@ -888,22 +773,18 @@ ahc_flush_device_writes(struct ahc_softc *ahc) } /**************************** Proc FS Support *********************************/ -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -int ahc_linux_proc_info(char *, char **, off_t, int, int, int); -#else int ahc_linux_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int); -#endif /*************************** Domain Validation ********************************/ /*********************** Transaction Access Wrappers *************************/ -static __inline void ahc_cmd_set_transaction_status(Scsi_Cmnd *, uint32_t); +static __inline void ahc_cmd_set_transaction_status(struct scsi_cmnd *, uint32_t); static __inline void ahc_set_transaction_status(struct scb *, uint32_t); -static __inline void ahc_cmd_set_scsi_status(Scsi_Cmnd *, uint32_t); +static __inline void ahc_cmd_set_scsi_status(struct scsi_cmnd *, uint32_t); static __inline void ahc_set_scsi_status(struct scb *, uint32_t); -static __inline uint32_t ahc_cmd_get_transaction_status(Scsi_Cmnd *cmd); +static __inline uint32_t ahc_cmd_get_transaction_status(struct scsi_cmnd *cmd); static __inline uint32_t ahc_get_transaction_status(struct scb *); -static __inline uint32_t ahc_cmd_get_scsi_status(Scsi_Cmnd *cmd); +static __inline uint32_t ahc_cmd_get_scsi_status(struct scsi_cmnd *cmd); static __inline uint32_t ahc_get_scsi_status(struct scb *); static __inline void ahc_set_transaction_tag(struct scb *, int, u_int); static __inline u_long ahc_get_transfer_length(struct scb *); @@ -922,7 +803,7 @@ static __inline void ahc_platform_scb_free(struct ahc_softc *ahc, static __inline void ahc_freeze_scb(struct scb *scb); static __inline -void ahc_cmd_set_transaction_status(Scsi_Cmnd *cmd, uint32_t status) +void ahc_cmd_set_transaction_status(struct scsi_cmnd *cmd, uint32_t status) { cmd->result &= ~(CAM_STATUS_MASK << 16); cmd->result |= status << 16; @@ -935,7 +816,7 @@ void ahc_set_transaction_status(struct scb *scb, uint32_t status) } static __inline -void ahc_cmd_set_scsi_status(Scsi_Cmnd *cmd, uint32_t status) +void ahc_cmd_set_scsi_status(struct scsi_cmnd *cmd, uint32_t status) { cmd->result &= ~0xFFFF; cmd->result |= status; @@ -948,7 +829,7 @@ void ahc_set_scsi_status(struct scb *scb, uint32_t status) } static __inline -uint32_t ahc_cmd_get_transaction_status(Scsi_Cmnd *cmd) +uint32_t ahc_cmd_get_transaction_status(struct scsi_cmnd *cmd) { return ((cmd->result >> 16) & CAM_STATUS_MASK); } @@ -960,7 +841,7 @@ uint32_t ahc_get_transaction_status(struct scb *scb) } static __inline -uint32_t ahc_cmd_get_scsi_status(Scsi_Cmnd *cmd) +uint32_t ahc_cmd_get_scsi_status(struct scsi_cmnd *cmd) { return (cmd->result & 0xFFFF); } diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c index 6f6674aa31e..2a0ebce83e7 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c +++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c @@ -221,13 +221,11 @@ ahc_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent) && ahc_linux_get_memsize() > 0x80000000 && pci_set_dma_mask(pdev, mask_39bit) == 0) { ahc->flags |= AHC_39BIT_ADDRESSING; - ahc->platform_data->hw_dma_mask = mask_39bit; } else { if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) { printk(KERN_WARNING "aic7xxx: No suitable DMA available.\n"); return (-ENODEV); } - ahc->platform_data->hw_dma_mask = DMA_32BIT_MASK; } ahc->dev_softc = pci; error = ahc_pci_config(ahc, entry); @@ -236,15 +234,8 @@ ahc_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return (-error); } pci_set_drvdata(pdev, ahc); - if (aic7xxx_detect_complete) { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) + if (aic7xxx_detect_complete) ahc_linux_register_host(ahc, &aic7xxx_driver_template); -#else - printf("aic7xxx: ignoring PCI device found after " - "initialization\n"); - return (-ENODEV); -#endif - } return (0); } diff --git a/drivers/scsi/aic7xxx/aic7xxx_proc.c b/drivers/scsi/aic7xxx/aic7xxx_proc.c index 85e80eecc9d..5fece859fbd 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_proc.c +++ b/drivers/scsi/aic7xxx/aic7xxx_proc.c @@ -289,13 +289,8 @@ done: * Return information to handle /proc support for the driver. */ int -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -ahc_linux_proc_info(char *buffer, char **start, off_t offset, - int length, int hostno, int inout) -#else ahc_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start, off_t offset, int length, int inout) -#endif { struct ahc_softc *ahc; struct info_str info; @@ -307,15 +302,7 @@ ahc_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start, retval = -EINVAL; ahc_list_lock(&s); -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) - TAILQ_FOREACH(ahc, &ahc_tailq, links) { - if (ahc->platform_data->host->host_no == hostno) - break; - } -#else ahc = ahc_find_softc(*(struct ahc_softc **)shost->hostdata); -#endif - if (ahc == NULL) goto done; diff --git a/drivers/scsi/aic7xxx/aiclib.c b/drivers/scsi/aic7xxx/aiclib.c index 79bfd9efd8e..7c5a6db0e67 100644 --- a/drivers/scsi/aic7xxx/aiclib.c +++ b/drivers/scsi/aic7xxx/aiclib.c @@ -35,7 +35,6 @@ #include <linux/version.h> /* Core SCSI definitions */ -#include "scsi.h" #include <scsi/scsi_host.h> #include "aiclib.h" #include "cam.h" diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 3867f91ef8c..3be54643925 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -153,6 +153,7 @@ static struct ata_port_operations piix_pata_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_operations piix_sata_ops = { @@ -180,6 +181,7 @@ static struct ata_port_operations piix_sata_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info piix_port_info[] = { @@ -663,15 +665,6 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) return ata_pci_init_one(pdev, port_info, n_ports); } -/** - * piix_init - - * - * LOCKING: - * - * RETURNS: - * - */ - static int __init piix_init(void) { int rc; @@ -687,13 +680,6 @@ static int __init piix_init(void) return 0; } -/** - * piix_exit - - * - * LOCKING: - * - */ - static void __exit piix_exit(void) { pci_unregister_driver(&piix_pci_driver); diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 2e2486b035d..83f062ed908 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -179,8 +179,18 @@ static void idescsi_input_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsigne return; } count = min(pc->sg->length - pc->b_count, bcount); - buf = page_address(pc->sg->page) + pc->sg->offset; - drive->hwif->atapi_input_bytes(drive, buf + pc->b_count, count); + if (PageHighMem(pc->sg->page)) { + unsigned long flags; + + local_irq_save(flags); + buf = kmap_atomic(pc->sg->page, KM_IRQ0) + pc->sg->offset; + drive->hwif->atapi_input_bytes(drive, buf + pc->b_count, count); + kunmap_atomic(buf - pc->sg->offset, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(pc->sg->page) + pc->sg->offset; + drive->hwif->atapi_input_bytes(drive, buf + pc->b_count, count); + } bcount -= count; pc->b_count += count; if (pc->b_count == pc->sg->length) { pc->sg++; @@ -201,8 +211,18 @@ static void idescsi_output_buffers (ide_drive_t *drive, idescsi_pc_t *pc, unsign return; } count = min(pc->sg->length - pc->b_count, bcount); - buf = page_address(pc->sg->page) + pc->sg->offset; - drive->hwif->atapi_output_bytes(drive, buf + pc->b_count, count); + if (PageHighMem(pc->sg->page)) { + unsigned long flags; + + local_irq_save(flags); + buf = kmap_atomic(pc->sg->page, KM_IRQ0) + pc->sg->offset; + drive->hwif->atapi_output_bytes(drive, buf + pc->b_count, count); + kunmap_atomic(buf - pc->sg->offset, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(pc->sg->page) + pc->sg->offset; + drive->hwif->atapi_output_bytes(drive, buf + pc->b_count, count); + } bcount -= count; pc->b_count += count; if (pc->b_count == pc->sg->length) { pc->sg++; @@ -713,7 +733,6 @@ static void idescsi_add_settings(ide_drive_t *drive) */ static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi) { - DRIVER(drive)->busy++; if (drive->id && (drive->id->config & 0x0060) == 0x20) set_bit (IDESCSI_DRQ_INTERRUPT, &scsi->flags); set_bit(IDESCSI_TRANSFORM, &scsi->transform); @@ -722,17 +741,16 @@ static void idescsi_setup (ide_drive_t *drive, idescsi_scsi_t *scsi) set_bit(IDESCSI_LOG_CMD, &scsi->log); #endif /* IDESCSI_DEBUG_LOG */ idescsi_add_settings(drive); - DRIVER(drive)->busy--; } -static int idescsi_cleanup (ide_drive_t *drive) +static int ide_scsi_remove(struct device *dev) { + ide_drive_t *drive = to_ide_device(dev); struct Scsi_Host *scsihost = drive->driver_data; struct ide_scsi_obj *scsi = scsihost_to_idescsi(scsihost); struct gendisk *g = scsi->disk; - if (ide_unregister_subdriver(drive)) - return 1; + ide_unregister_subdriver(drive, scsi->driver); ide_unregister_region(g); @@ -746,7 +764,7 @@ static int idescsi_cleanup (ide_drive_t *drive) return 0; } -static int idescsi_attach(ide_drive_t *drive); +static int ide_scsi_probe(struct device *); #ifdef CONFIG_PROC_FS static ide_proc_entry_t idescsi_proc[] = { @@ -757,24 +775,22 @@ static ide_proc_entry_t idescsi_proc[] = { # define idescsi_proc NULL #endif -/* - * IDE subdriver functions, registered with ide.c - */ static ide_driver_t idescsi_driver = { .owner = THIS_MODULE, - .name = "ide-scsi", + .gen_driver = { + .name = "ide-scsi", + .bus = &ide_bus_type, + .probe = ide_scsi_probe, + .remove = ide_scsi_remove, + }, .version = IDESCSI_VERSION, .media = ide_scsi, - .busy = 0, .supports_dsc_overlap = 0, .proc = idescsi_proc, - .attach = idescsi_attach, - .cleanup = idescsi_cleanup, .do_request = idescsi_do_request, .end_request = idescsi_end_request, .error = idescsi_atapi_error, .abort = idescsi_atapi_abort, - .drives = LIST_HEAD_INIT(idescsi_driver.drives), }; static int idescsi_ide_open(struct inode *inode, struct file *filp) @@ -821,8 +837,6 @@ static struct block_device_operations idescsi_ops = { .ioctl = idescsi_ide_ioctl, }; -static int idescsi_attach(ide_drive_t *drive); - static int idescsi_slave_configure(struct scsi_device * sdp) { /* Configure detected device */ @@ -1095,8 +1109,9 @@ static struct scsi_host_template idescsi_template = { .proc_name = "ide-scsi", }; -static int idescsi_attach(ide_drive_t *drive) +static int ide_scsi_probe(struct device *dev) { + ide_drive_t *drive = to_ide_device(dev); idescsi_scsi_t *idescsi; struct Scsi_Host *host; struct gendisk *g; @@ -1112,7 +1127,7 @@ static int idescsi_attach(ide_drive_t *drive) !drive->present || drive->media == ide_disk || !(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t)))) - return 1; + return -ENODEV; g = alloc_disk(1 << PARTN_BITS); if (!g) @@ -1138,20 +1153,19 @@ static int idescsi_attach(ide_drive_t *drive) idescsi->host = host; idescsi->disk = g; g->private_data = &idescsi->driver; - err = ide_register_subdriver(drive, &idescsi_driver); + ide_register_subdriver(drive, &idescsi_driver); + err = 0; + idescsi_setup(drive, idescsi); + g->fops = &idescsi_ops; + ide_register_region(g); + err = scsi_add_host(host, &drive->gendev); if (!err) { - idescsi_setup (drive, idescsi); - g->fops = &idescsi_ops; - ide_register_region(g); - err = scsi_add_host(host, &drive->gendev); - if (!err) { - scsi_scan_host(host); - return 0; - } - /* fall through on error */ - ide_unregister_region(g); - ide_unregister_subdriver(drive); + scsi_scan_host(host); + return 0; } + /* fall through on error */ + ide_unregister_region(g); + ide_unregister_subdriver(drive, &idescsi_driver); put_disk(g); out_host_put: @@ -1161,12 +1175,12 @@ out_host_put: static int __init init_idescsi_module(void) { - return ide_register_driver(&idescsi_driver); + return driver_register(&idescsi_driver.gen_driver); } static void __exit exit_idescsi_module(void) { - ide_unregister_driver(&idescsi_driver); + driver_unregister(&idescsi_driver.gen_driver); } module_init(init_idescsi_module); diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 0b5d3a5b7ed..21d194c6ace 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -186,6 +186,28 @@ static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) ata_wait_idle(ap); } + +/** + * ata_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller using MMIO + * or PIO as indicated by the ATA_FLAG_MMIO flag. + * Writes the control, feature, nsect, lbal, lbam, and lbah registers. + * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, + * hob_lbal, hob_lbam, and hob_lbah. + * + * This function waits for idle (!BUSY and !DRQ) after writing + * registers. If the control register has a new value, this + * function also waits for idle after writing control and before + * writing the remaining registers. + * + * May be used as the tf_load() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) @@ -195,11 +217,11 @@ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) } /** - * ata_exec_command - issue ATA command to host controller + * ata_exec_command_pio - issue ATA command to host controller * @ap: port to which command is being issued * @tf: ATA taskfile register set * - * Issues PIO/MMIO write to ATA command register, with proper + * Issues PIO write to ATA command register, with proper * synchronization with interrupt handler / other threads. * * LOCKING: @@ -235,6 +257,18 @@ static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) ata_pause(ap); } + +/** + * ata_exec_command - issue ATA command to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues PIO/MMIO write to ATA command register, with proper + * synchronization with interrupt handler / other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) @@ -305,7 +339,7 @@ void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf) } /** - * ata_tf_read - input device's ATA taskfile shadow registers + * ata_tf_read_pio - input device's ATA taskfile shadow registers * @ap: Port from which input is read * @tf: ATA taskfile register set for storing input * @@ -368,6 +402,23 @@ static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) } } + +/** + * ata_tf_read - input device's ATA taskfile shadow registers + * @ap: Port from which input is read + * @tf: ATA taskfile register set for storing input + * + * Reads ATA taskfile registers for currently-selected device + * into @tf. + * + * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 + * is set, also reads the hob registers. + * + * May be used as the tf_read() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) @@ -381,7 +432,7 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) * @ap: port where the device is * * Reads ATA taskfile status register for currently-selected device - * and return it's value. This also clears pending interrupts + * and return its value. This also clears pending interrupts * from this device * * LOCKING: @@ -397,7 +448,7 @@ static u8 ata_check_status_pio(struct ata_port *ap) * @ap: port where the device is * * Reads ATA taskfile status register for currently-selected device - * via MMIO and return it's value. This also clears pending interrupts + * via MMIO and return its value. This also clears pending interrupts * from this device * * LOCKING: @@ -408,6 +459,20 @@ static u8 ata_check_status_mmio(struct ata_port *ap) return readb((void __iomem *) ap->ioaddr.status_addr); } + +/** + * ata_check_status - Read device status reg & clear interrupt + * @ap: port where the device is + * + * Reads ATA taskfile status register for currently-selected device + * and return its value. This also clears pending interrupts + * from this device + * + * May be used as the check_status() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ u8 ata_check_status(struct ata_port *ap) { if (ap->flags & ATA_FLAG_MMIO) @@ -415,6 +480,20 @@ u8 ata_check_status(struct ata_port *ap) return ata_check_status_pio(ap); } + +/** + * ata_altstatus - Read device alternate status reg + * @ap: port where the device is + * + * Reads ATA taskfile alternate status register for + * currently-selected device and return its value. + * + * Note: may NOT be used as the check_altstatus() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ u8 ata_altstatus(struct ata_port *ap) { if (ap->ops->check_altstatus) @@ -425,6 +504,20 @@ u8 ata_altstatus(struct ata_port *ap) return inb(ap->ioaddr.altstatus_addr); } + +/** + * ata_chk_err - Read device error reg + * @ap: port where the device is + * + * Reads ATA taskfile error register for + * currently-selected device and return its value. + * + * Note: may NOT be used as the check_err() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ u8 ata_chk_err(struct ata_port *ap) { if (ap->ops->check_err) @@ -873,10 +966,24 @@ void ata_dev_id_string(u16 *id, unsigned char *s, } } + +/** + * ata_noop_dev_select - Select device 0/1 on ATA bus + * @ap: ATA channel to manipulate + * @device: ATA device (numbered from zero) to select + * + * This function performs no actual function. + * + * May be used as the dev_select() entry in ata_port_operations. + * + * LOCKING: + * caller. + */ void ata_noop_dev_select (struct ata_port *ap, unsigned int device) { } + /** * ata_std_dev_select - Select device 0/1 on ATA bus * @ap: ATA channel to manipulate @@ -884,7 +991,9 @@ void ata_noop_dev_select (struct ata_port *ap, unsigned int device) * * Use the method defined in the ATA specification to * make either device 0, or device 1, active on the - * ATA channel. + * ATA channel. Works with both PIO and MMIO. + * + * May be used as the dev_select() entry in ata_port_operations. * * LOCKING: * caller. @@ -1190,7 +1299,12 @@ err_out: * ata_bus_probe - Reset and probe ATA bus * @ap: Bus to probe * + * Master ATA bus probing function. Initiates a hardware-dependent + * bus reset, then attempts to identify any devices found on + * the bus. + * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: * Zero on success, non-zero on error. @@ -1229,10 +1343,14 @@ err_out: } /** - * ata_port_probe - - * @ap: + * ata_port_probe - Mark port as enabled + * @ap: Port for which we indicate enablement * - * LOCKING: + * Modify @ap data structure such that the system + * thinks that the entire port is enabled. + * + * LOCKING: host_set lock, or some other form of + * serialization. */ void ata_port_probe(struct ata_port *ap) @@ -1241,10 +1359,15 @@ void ata_port_probe(struct ata_port *ap) } /** - * __sata_phy_reset - - * @ap: + * __sata_phy_reset - Wake/reset a low-level SATA PHY + * @ap: SATA port associated with target SATA PHY. + * + * This function issues commands to standard SATA Sxxx + * PHY registers, to wake up the phy (and device), and + * clear any reset condition. * * LOCKING: + * PCI/etc. bus probe sem. * */ void __sata_phy_reset(struct ata_port *ap) @@ -1253,11 +1376,11 @@ void __sata_phy_reset(struct ata_port *ap) unsigned long timeout = jiffies + (HZ * 5); if (ap->flags & ATA_FLAG_SATA_RESET) { - scr_write(ap, SCR_CONTROL, 0x301); /* issue phy wake/reset */ - scr_read(ap, SCR_STATUS); /* dummy read; flush */ + /* issue phy wake/reset */ + scr_write_flush(ap, SCR_CONTROL, 0x301); udelay(400); /* FIXME: a guess */ } - scr_write(ap, SCR_CONTROL, 0x300); /* issue phy wake/clear reset */ + scr_write_flush(ap, SCR_CONTROL, 0x300); /* phy wake/clear reset */ /* wait for phy to become ready, if necessary */ do { @@ -1289,10 +1412,14 @@ void __sata_phy_reset(struct ata_port *ap) } /** - * __sata_phy_reset - - * @ap: + * sata_phy_reset - Reset SATA bus. + * @ap: SATA port associated with target SATA PHY. + * + * This function resets the SATA bus, and then probes + * the bus for devices. * * LOCKING: + * PCI/etc. bus probe sem. * */ void sata_phy_reset(struct ata_port *ap) @@ -1304,10 +1431,16 @@ void sata_phy_reset(struct ata_port *ap) } /** - * ata_port_disable - - * @ap: + * ata_port_disable - Disable port. + * @ap: Port to be disabled. * - * LOCKING: + * Modify @ap data structure such that the system + * thinks that the entire port is disabled, and should + * never attempt to probe or communicate with devices + * on this port. + * + * LOCKING: host_set lock, or some other form of + * serialization. */ void ata_port_disable(struct ata_port *ap) @@ -1416,7 +1549,10 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, * ata_set_mode - Program timings and issue SET FEATURES - XFER * @ap: port on which timings will be programmed * + * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). + * * LOCKING: + * PCI/etc. bus probe sem. * */ static void ata_set_mode(struct ata_port *ap) @@ -1467,7 +1603,10 @@ err_out: * @tmout_pat: impatience timeout * @tmout: overall timeout * - * LOCKING: + * Sleep until ATA Status register bit BSY clears, + * or a timeout occurs. + * + * LOCKING: None. * */ @@ -1553,10 +1692,14 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) } /** - * ata_bus_edd - - * @ap: + * ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command. + * @ap: Port to reset and probe + * + * Use the EXECUTE DEVICE DIAGNOSTIC command to reset and + * probe the bus. Not often used these days. * * LOCKING: + * PCI/etc. bus probe sem. * */ @@ -1633,8 +1776,8 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, * the device is ATA or ATAPI. * * LOCKING: - * Inherited from caller. Some functions called by this function - * obtain the host_set lock. + * PCI/etc. bus probe sem. + * Obtains host_set lock. * * SIDE EFFECTS: * Sets ATA_FLAG_PORT_DISABLED if bus reset fails. @@ -1876,7 +2019,11 @@ static int fgb(u32 bitmap) * @xfer_mode_out: (output) SET FEATURES - XFER MODE code * @xfer_shift_out: (output) bit shift that selects this mode * + * Based on host and device capabilities, determine the + * maximum transfer mode that is amenable to all. + * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: * Zero on success, negative on error. @@ -1909,7 +2056,11 @@ static int ata_choose_xfer_mode(struct ata_port *ap, * @ap: Port associated with device @dev * @dev: Device to which command will be sent * + * Issue SET FEATURES - XFER MODE command to device @dev + * on port @ap. + * * LOCKING: + * PCI/etc. bus probe sem. */ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) @@ -1947,10 +2098,13 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) } /** - * ata_sg_clean - - * @qc: + * ata_sg_clean - Unmap DMA memory associated with command + * @qc: Command containing DMA memory to be released + * + * Unmap all mapped DMA memory associated with this command. * * LOCKING: + * spin_lock_irqsave(host_set lock) */ static void ata_sg_clean(struct ata_queued_cmd *qc) @@ -1981,7 +2135,11 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) * ata_fill_sg - Fill PCI IDE PRD table * @qc: Metadata associated with taskfile to be transferred * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. + * * LOCKING: + * spin_lock_irqsave(host_set lock) * */ static void ata_fill_sg(struct ata_queued_cmd *qc) @@ -2028,7 +2186,13 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) * ata_check_atapi_dma - Check whether ATAPI DMA can be supported * @qc: Metadata associated with taskfile to check * + * Allow low-level driver to filter ATA PACKET commands, returning + * a status indicating whether or not it is OK to use DMA for the + * supplied PACKET command. + * * LOCKING: + * spin_lock_irqsave(host_set lock) + * * RETURNS: 0 when ATAPI DMA can be used * nonzero otherwise */ @@ -2046,6 +2210,8 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) * ata_qc_prep - Prepare taskfile for submission * @qc: Metadata associated with taskfile to be prepared * + * Prepare ATA taskfile for submission. + * * LOCKING: * spin_lock_irqsave(host_set lock) */ @@ -2057,6 +2223,32 @@ void ata_qc_prep(struct ata_queued_cmd *qc) ata_fill_sg(qc); } +/** + * ata_sg_init_one - Associate command with memory buffer + * @qc: Command to be associated + * @buf: Memory buffer + * @buflen: Length of memory buffer, in bytes. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a single memory buffer, @buf of byte length @buflen. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + + + +/** + * ata_sg_init_one - Prepare a one-entry scatter-gather list. + * @qc: Queued command + * @buf: transfer buffer + * @buflen: length of buf + * + * Builds a single-entry scatter-gather list to initiate a + * transfer utilizing the specified buffer. + * + * LOCKING: + */ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) { struct scatterlist *sg; @@ -2071,9 +2263,35 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) sg = qc->sg; sg->page = virt_to_page(buf); sg->offset = (unsigned long) buf & ~PAGE_MASK; - sg_dma_len(sg) = buflen; + sg->length = buflen; } +/** + * ata_sg_init - Associate command with scatter-gather table. + * @qc: Command to be associated + * @sg: Scatter-gather table. + * @n_elem: Number of elements in s/g table. + * + * Initialize the data-related elements of queued_cmd @qc + * to point to a scatter-gather table @sg, containing @n_elem + * elements. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + + +/** + * ata_sg_init - Assign a scatter gather list to a queued command + * @qc: Queued command + * @sg: Scatter-gather list + * @n_elem: length of sg list + * + * Attaches a scatter-gather list to a queued command. + * + * LOCKING: + */ + void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, unsigned int n_elem) { @@ -2083,14 +2301,16 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg, } /** - * ata_sg_setup_one - - * @qc: + * ata_sg_setup_one - DMA-map the memory buffer associated with a command. + * @qc: Command with memory buffer to be mapped. + * + * DMA-map the memory buffer associated with queued_cmd @qc. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: - * + * Zero on success, negative on error. */ static int ata_sg_setup_one(struct ata_queued_cmd *qc) @@ -2101,11 +2321,12 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) dma_addr_t dma_address; dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt, - sg_dma_len(sg), dir); + sg->length, dir); if (dma_mapping_error(dma_address)) return -1; sg_dma_address(sg) = dma_address; + sg_dma_len(sg) = sg->length; DPRINTK("mapped buffer of %d bytes for %s\n", sg_dma_len(sg), qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); @@ -2114,13 +2335,16 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) } /** - * ata_sg_setup - - * @qc: + * ata_sg_setup - DMA-map the scatter-gather table associated with a command. + * @qc: Command with scatter-gather table to be mapped. + * + * DMA-map the scatter-gather table associated with queued_cmd @qc. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: + * Zero on success, negative on error. * */ @@ -2150,6 +2374,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) * @ap: * * LOCKING: + * None. (executing in kernel thread context) * * RETURNS: * @@ -2197,6 +2422,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap) * @ap: * * LOCKING: + * None. (executing in kernel thread context) */ static void ata_pio_complete (struct ata_port *ap) @@ -2239,6 +2465,18 @@ static void ata_pio_complete (struct ata_port *ap) ata_qc_complete(qc, drv_stat); } + +/** + * swap_buf_le16 - + * @buf: Buffer to swap + * @buf_words: Number of 16-bit words in buffer. + * + * Swap halves of 16-bit words if needed to convert from + * little-endian byte order to native cpu byte order, or + * vice-versa. + * + * LOCKING: + */ void swap_buf_le16(u16 *buf, unsigned int buf_words) { #ifdef __BIG_ENDIAN @@ -2310,7 +2548,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) qc->cursect++; qc->cursg_ofs++; - if ((qc->cursg_ofs * ATA_SECT_SIZE) == sg_dma_len(&sg[qc->cursg])) { + if ((qc->cursg_ofs * ATA_SECT_SIZE) == (&sg[qc->cursg])->length) { qc->cursg++; qc->cursg_ofs = 0; } @@ -2347,7 +2585,7 @@ next_page: page = nth_page(page, (offset >> PAGE_SHIFT)); offset %= PAGE_SIZE; - count = min(sg_dma_len(sg) - qc->cursg_ofs, bytes); + count = min(sg->length - qc->cursg_ofs, bytes); /* don't cross page boundaries */ count = min(count, (unsigned int)PAGE_SIZE - offset); @@ -2358,7 +2596,7 @@ next_page: qc->curbytes += count; qc->cursg_ofs += count; - if (qc->cursg_ofs == sg_dma_len(sg)) { + if (qc->cursg_ofs == sg->length) { qc->cursg++; qc->cursg_ofs = 0; } @@ -2371,7 +2609,7 @@ next_page: kunmap(page); if (bytes) { - if (qc->cursg_ofs < sg_dma_len(sg)) + if (qc->cursg_ofs < sg->length) goto next_page; goto next_sg; } @@ -2414,6 +2652,7 @@ err_out: * @ap: * * LOCKING: + * None. (executing in kernel thread context) */ static void ata_pio_block(struct ata_port *ap) @@ -2539,7 +2778,7 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); qc->dma_dir = DMA_FROM_DEVICE; - memset(&qc->cdb, 0, sizeof(ap->cdb_len)); + memset(&qc->cdb, 0, ap->cdb_len); qc->cdb[0] = REQUEST_SENSE; qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; @@ -2582,6 +2821,7 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, * transaction completed successfully. * * LOCKING: + * Inherited from SCSI layer (none, can sleep) */ static void ata_qc_timeout(struct ata_queued_cmd *qc) @@ -2691,6 +2931,7 @@ out: * @dev: Device from whom we request an available command structure * * LOCKING: + * None. */ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) @@ -2716,6 +2957,7 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) * @dev: Device from whom we request an available command structure * * LOCKING: + * None. */ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, @@ -2780,6 +3022,7 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc) * in case something prevents using it. * * LOCKING: + * spin_lock_irqsave(host_set lock) * */ void ata_qc_free(struct ata_queued_cmd *qc) @@ -2793,9 +3036,13 @@ void ata_qc_free(struct ata_queued_cmd *qc) /** * ata_qc_complete - Complete an active ATA command * @qc: Command to complete - * @drv_stat: ATA status register contents + * @drv_stat: ATA Status register contents + * + * Indicate to the mid and upper layers that an ATA + * command has completed, with either an ok or not-ok status. * * LOCKING: + * spin_lock_irqsave(host_set lock) * */ @@ -2811,6 +3058,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) /* call completion callback */ rc = qc->complete_fn(qc, drv_stat); + qc->flags &= ~ATA_QCFLAG_ACTIVE; /* if callback indicates not to complete command (non-zero), * return immediately @@ -2890,6 +3138,7 @@ err_out: return -1; } + /** * ata_qc_issue_prot - issue taskfile to device in proto-dependent manner * @qc: command to issue to device @@ -2899,6 +3148,8 @@ err_out: * classes called "protocols", and issuing each type of protocol * is slightly different. * + * May be used as the qc_issue() entry in ata_port_operations. + * * LOCKING: * spin_lock_irqsave(host_set lock) * @@ -2956,7 +3207,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) } /** - * ata_bmdma_setup - Set up PCI IDE BMDMA transaction + * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction * @qc: Info associated with this ATA transaction. * * LOCKING: @@ -3063,6 +3314,18 @@ static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) ap->ioaddr.bmdma_addr + ATA_DMA_CMD); } + +/** + * ata_bmdma_start - Start a PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Writes the ATA_DMA_START flag to the DMA command register. + * + * May be used as the bmdma_start() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ void ata_bmdma_start(struct ata_queued_cmd *qc) { if (qc->ap->flags & ATA_FLAG_MMIO) @@ -3071,6 +3334,20 @@ void ata_bmdma_start(struct ata_queued_cmd *qc) ata_bmdma_start_pio(qc); } + +/** + * ata_bmdma_setup - Set up PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * Writes address of PRD table to device's PRD Table Address + * register, sets the DMA control register, and calls + * ops->exec_command() to start the transfer. + * + * May be used as the bmdma_setup() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ void ata_bmdma_setup(struct ata_queued_cmd *qc) { if (qc->ap->flags & ATA_FLAG_MMIO) @@ -3079,6 +3356,19 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc) ata_bmdma_setup_pio(qc); } + +/** + * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. + * @ap: Port associated with this ATA transaction. + * + * Clear interrupt and error flags in DMA status register. + * + * May be used as the irq_clear() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + void ata_bmdma_irq_clear(struct ata_port *ap) { if (ap->flags & ATA_FLAG_MMIO) { @@ -3091,6 +3381,19 @@ void ata_bmdma_irq_clear(struct ata_port *ap) } + +/** + * ata_bmdma_status - Read PCI IDE BMDMA status + * @ap: Port associated with this ATA transaction. + * + * Read and return BMDMA status register. + * + * May be used as the bmdma_status() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + u8 ata_bmdma_status(struct ata_port *ap) { u8 host_stat; @@ -3102,6 +3405,19 @@ u8 ata_bmdma_status(struct ata_port *ap) return host_stat; } + +/** + * ata_bmdma_stop - Stop PCI IDE BMDMA transfer + * @ap: Port associated with this ATA transaction. + * + * Clears the ATA_DMA_START flag in the dma control register + * + * May be used as the bmdma_stop() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + void ata_bmdma_stop(struct ata_port *ap) { if (ap->flags & ATA_FLAG_MMIO) { @@ -3201,13 +3517,18 @@ idle_irq: /** * ata_interrupt - Default ATA host interrupt handler - * @irq: irq line - * @dev_instance: pointer to our host information structure + * @irq: irq line (unused) + * @dev_instance: pointer to our ata_host_set information structure * @regs: unused * + * Default interrupt handler for PCI IDE devices. Calls + * ata_host_intr() for each port that is not disabled. + * * LOCKING: + * Obtains host_set lock during operation. * * RETURNS: + * IRQ_NONE or IRQ_HANDLED. * */ @@ -3229,7 +3550,8 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN))) + if (qc && (!(qc->tf.ctl & ATA_NIEN)) && + (qc->flags & ATA_QCFLAG_ACTIVE)) handled |= ata_host_intr(ap, qc); } } @@ -3299,6 +3621,19 @@ err_out: ata_qc_complete(qc, ATA_ERR); } + +/** + * ata_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + */ + int ata_port_start (struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -3312,6 +3647,18 @@ int ata_port_start (struct ata_port *ap) return 0; } + +/** + * ata_port_stop - Undo ata_port_start() + * @ap: Port to shut down + * + * Frees the PRD table. + * + * May be used as the port_stop() entry in ata_port_operations. + * + * LOCKING: + */ + void ata_port_stop (struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -3319,6 +3666,13 @@ void ata_port_stop (struct ata_port *ap) dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma); } +void ata_host_stop (struct ata_host_set *host_set) +{ + if (host_set->mmio_base) + iounmap(host_set->mmio_base); +} + + /** * ata_host_remove - Unregister SCSI host structure with upper layers * @ap: Port to unregister @@ -3347,7 +3701,11 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) * @ent: Probe information provided by low-level driver * @port_no: Port number associated with this ata_port * + * Initialize a new ata_port structure, and its associated + * scsi_host. + * * LOCKING: + * Inherited from caller. * */ @@ -3402,9 +3760,13 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, * @host_set: Collections of ports to which we add * @port_no: Port number associated with this host * + * Attach low-level ATA driver to system. + * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: + * New ata_port on success, for NULL on error. * */ @@ -3437,12 +3799,22 @@ err_out: } /** - * ata_device_add - - * @ent: + * ata_device_add - Register hardware device with ATA and SCSI layers + * @ent: Probe information describing hardware device to be registered + * + * This function processes the information provided in the probe + * information struct @ent, allocates the necessary ATA and SCSI + * host information structures, initializes them, and registers + * everything with requisite kernel subsystems. + * + * This function requests irqs, probes the ATA bus, and probes + * the SCSI bus. * * LOCKING: + * PCI/etc. bus probe sem. * * RETURNS: + * Number of ports registered. Zero on error (no ports registered). * */ @@ -3594,7 +3966,15 @@ int ata_scsi_release(struct Scsi_Host *host) /** * ata_std_ports - initialize ioaddr with standard port offsets. * @ioaddr: IO address structure to be initialized + * + * Utility function which initializes data_addr, error_addr, + * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr, + * device_addr, status_addr, and command_addr to standard offsets + * relative to cmd_addr. + * + * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr. */ + void ata_std_ports(struct ata_ioports *ioaddr) { ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA; @@ -3636,6 +4016,20 @@ ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port) return probe_ent; } + + +/** + * ata_pci_init_native_mode - Initialize native-mode driver + * @pdev: pci device to be initialized + * @port: array[2] of pointers to port info structures. + * + * Utility function which allocates and initializes an + * ata_probe_ent structure for a standard dual-port + * PIO-based IDE controller. The returned ata_probe_ent + * structure can be passed to ata_device_add(). The returned + * ata_probe_ent structure should then be freed with kfree(). + */ + #ifdef CONFIG_PCI struct ata_probe_ent * ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port) @@ -3717,10 +4111,19 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, * @port_info: Information from low-level host driver * @n_ports: Number of ports attached to host controller * + * This is a helper function which can be called from a driver's + * xxx_init_one() probe function if the hardware uses traditional + * IDE taskfile registers. + * + * This function calls pci_enable_device(), reserves its register + * regions, sets the dma mask, enables bus master mode, and calls + * ata_device_add() + * * LOCKING: * Inherited from PCI layer (may sleep). * * RETURNS: + * Zero on success, negative on errno-based value on error. * */ @@ -3875,10 +4278,6 @@ void ata_pci_remove_one (struct pci_dev *pdev) } free_irq(host_set->irq, host_set); - if (host_set->ops->host_stop) - host_set->ops->host_stop(host_set); - if (host_set->mmio_base) - iounmap(host_set->mmio_base); for (i = 0; i < host_set->n_ports; i++) { ap = host_set->ports[i]; @@ -3897,6 +4296,9 @@ void ata_pci_remove_one (struct pci_dev *pdev) scsi_host_put(ap->host); } + if (host_set->ops->host_stop) + host_set->ops->host_stop(host_set); + kfree(host_set); pci_release_regions(pdev); @@ -3940,15 +4342,6 @@ int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits) #endif /* CONFIG_PCI */ -/** - * ata_init - - * - * LOCKING: - * - * RETURNS: - * - */ - static int __init ata_init(void) { ata_wq = create_workqueue("ata"); @@ -3994,6 +4387,7 @@ EXPORT_SYMBOL_GPL(ata_chk_err); EXPORT_SYMBOL_GPL(ata_exec_command); EXPORT_SYMBOL_GPL(ata_port_start); EXPORT_SYMBOL_GPL(ata_port_stop); +EXPORT_SYMBOL_GPL(ata_host_stop); EXPORT_SYMBOL_GPL(ata_interrupt); EXPORT_SYMBOL_GPL(ata_qc_prep); EXPORT_SYMBOL_GPL(ata_bmdma_setup); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 4c96df060c3..7a4adc4c8f0 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -347,7 +347,10 @@ int ata_scsi_slave_config(struct scsi_device *sdev) */ if ((dev->flags & ATA_DFLAG_LBA48) && ((dev->flags & ATA_DFLAG_LOCK_SECTORS) == 0)) { - sdev->host->max_sectors = 2048; + /* + * do not overwrite sdev->host->max_sectors, since + * other drives on this host may not support LBA48 + */ blk_queue_max_sectors(sdev->request_queue, 2048); } } @@ -944,7 +947,7 @@ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, } /** - * ata_scsiop_noop - + * ata_scsiop_noop - Command handler that simply returns success. * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 6518226b8f8..d90430bbb0d 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -26,7 +26,7 @@ #define __LIBATA_H__ #define DRV_NAME "libata" -#define DRV_VERSION "1.10" /* must be exactly four chars */ +#define DRV_VERSION "1.11" /* must be exactly four chars */ struct ata_scsi_args { u16 *id; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 579448222d6..3c97aa45772 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -507,6 +507,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) int ret, i; unsigned int id, lun; unsigned long serial; + unsigned long flags; if (!CMD_SP(cmd)) return FAILED; @@ -519,7 +520,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) /* Check active list for command command. */ spin_unlock_irq(ha->host->host_lock); - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) { sp = ha->outstanding_cmds[i]; @@ -534,7 +535,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) sp->state)); DEBUG3(qla2x00_print_scsi_cmd(cmd);) - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); if (qla2x00_abort_command(ha, sp)) { DEBUG2(printk("%s(%ld): abort_command " "mbx failed.\n", __func__, ha->host_no)); @@ -543,20 +544,19 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) "mbx success.\n", __func__, ha->host_no)); ret = SUCCESS; } - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); break; } + spin_unlock_irqrestore(&ha->hardware_lock, flags); /* Wait for the command to be returned. */ if (ret == SUCCESS) { - spin_unlock(&ha->hardware_lock); if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) { qla_printk(KERN_ERR, ha, "scsi(%ld:%d:%d): Abort handler timed out -- %lx " "%x.\n", ha->host_no, id, lun, serial, ret); } - spin_lock(&ha->hardware_lock); } spin_lock_irq(ha->host->host_lock); @@ -588,6 +588,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) int status; srb_t *sp; struct scsi_cmnd *cmd; + unsigned long flags; status = 0; @@ -596,11 +597,11 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) * array */ for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); sp = ha->outstanding_cmds[cnt]; if (sp) { cmd = sp->cmd; - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); if (cmd->device->id == t) { if (!qla2x00_eh_wait_on_command(ha, cmd)) { status = 1; @@ -608,7 +609,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t) } } } else { - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); } } return (status); @@ -740,6 +741,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha) int status; srb_t *sp; struct scsi_cmnd *cmd; + unsigned long flags; status = 1; @@ -748,17 +750,17 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha) * array */ for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) { - spin_lock(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); sp = ha->outstanding_cmds[cnt]; if (sp) { cmd = sp->cmd; - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); status = qla2x00_eh_wait_on_command(ha, cmd); if (status == 0) break; } else { - spin_unlock(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); } } return (status); diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 69009f853a4..b0403ccd8a2 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -329,6 +329,8 @@ static void nv_host_stop (struct ata_host_set *host_set) host->host_desc->disable_hotplug(host_set); kfree(host); + + ata_host_stop(host_set); } static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 19a13e3590f..b18c90582e6 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -122,6 +122,7 @@ static struct ata_port_operations pdc_ata_ops = { .scr_write = pdc_sata_scr_write, .port_start = pdc_port_start, .port_stop = pdc_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info pdc_port_info[] = { @@ -151,6 +152,8 @@ static struct ata_port_info pdc_port_info[] = { static struct pci_device_id pdc_ata_pci_tbl[] = { { PCI_VENDOR_ID_PROMISE, 0x3371, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_2037x }, + { PCI_VENDOR_ID_PROMISE, 0x3571, PCI_ANY_ID, PCI_ANY_ID, 0, 0, + board_2037x }, { PCI_VENDOR_ID_PROMISE, 0x3373, PCI_ANY_ID, PCI_ANY_ID, 0, 0, board_2037x }, { PCI_VENDOR_ID_PROMISE, 0x3375, PCI_ANY_ID, PCI_ANY_ID, 0, 0, diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c index dfd36210471..1383e8a28d7 100644 --- a/drivers/scsi/sata_qstor.c +++ b/drivers/scsi/sata_qstor.c @@ -536,6 +536,8 @@ static void qs_host_stop(struct ata_host_set *host_set) writeb(0, mmio_base + QS_HCT_CTRL); /* disable host interrupts */ writeb(QS_CNFG3_GSRST, mmio_base + QS_HCF_CNFG3); /* global reset */ + + ata_host_stop(host_set); } static void qs_host_init(unsigned int chip_id, struct ata_probe_ent *pe) diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c index f0489dc302a..238580d244e 100644 --- a/drivers/scsi/sata_sil.c +++ b/drivers/scsi/sata_sil.c @@ -82,6 +82,7 @@ static struct pci_device_id sil_pci_tbl[] = { { 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 }, { 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, + { 0x1002, 0x437a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 }, { } /* terminate list */ }; @@ -160,6 +161,7 @@ static struct ata_port_operations sil_ops = { .scr_write = sil_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info sil_port_info[] = { diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index 5105ddd0844..e418b89c6b9 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -114,6 +114,7 @@ static struct ata_port_operations sis_ops = { .scr_write = sis_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info sis_port_info = { diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c index 8d1a5d25c05..edef1fa969f 100644 --- a/drivers/scsi/sata_svw.c +++ b/drivers/scsi/sata_svw.c @@ -313,6 +313,7 @@ static struct ata_port_operations k2_sata_ops = { .scr_write = k2_sata_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base) @@ -395,7 +396,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e /* Clear a magic bit in SCR1 according to Darwin, those help * some funky seagate drives (though so far, those were already - * set by the firmware on the machines I had access to + * set by the firmware on the machines I had access to) */ writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000, mmio_base + K2_SATA_SICR1_OFFSET); diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c index 70118650c46..140cea05de3 100644 --- a/drivers/scsi/sata_sx4.c +++ b/drivers/scsi/sata_sx4.c @@ -245,6 +245,8 @@ static void pdc20621_host_stop(struct ata_host_set *host_set) iounmap(dimm_mmio); kfree(hpriv); + + ata_host_stop(host_set); } static int pdc_port_start(struct ata_port *ap) diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 0bff4f475f2..a71fb54eebd 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -113,6 +113,7 @@ static struct ata_port_operations uli_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info uli_port_info = { diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 3a783066727..f43183c19a1 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -134,6 +134,7 @@ static struct ata_port_operations svia_sata_ops = { .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static struct ata_port_info svia_port_info = { diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c index 2c28f0ad73c..c5e09dc6f3d 100644 --- a/drivers/scsi/sata_vsc.c +++ b/drivers/scsi/sata_vsc.c @@ -21,6 +21,7 @@ #include <linux/blkdev.h> #include <linux/delay.h> #include <linux/interrupt.h> +#include <linux/dma-mapping.h> #include "scsi.h" #include <scsi/scsi_host.h> #include <linux/libata.h> @@ -230,6 +231,7 @@ static struct ata_port_operations vsc_sata_ops = { .scr_write = vsc_sata_scr_write, .port_start = ata_port_start, .port_stop = ata_port_stop, + .host_stop = ata_host_stop, }; static void __devinit vsc_sata_setup_port(struct ata_ioports *port, unsigned long base) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index cca772624ae..8d0d302844a 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -1197,6 +1197,7 @@ struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel, if (!starget) return ERR_PTR(-ENOMEM); + get_device(&starget->dev); down(&shost->scan_mutex); res = scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata); if (res != SCSI_SCAN_LUN_PRESENT) diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 28966d05435..67c6cc40ce1 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -35,7 +35,7 @@ #define SPI_PRINTK(x, l, f, a...) dev_printk(l, &(x)->dev, f , ##a) -#define SPI_NUM_ATTRS 10 /* increase this if you add attributes */ +#define SPI_NUM_ATTRS 13 /* increase this if you add attributes */ #define SPI_OTHER_ATTRS 1 /* Increase this if you add "always * on" attributes */ #define SPI_HOST_ATTRS 1 @@ -219,8 +219,11 @@ static int spi_setup_transport_attrs(struct device *dev) struct scsi_target *starget = to_scsi_target(dev); spi_period(starget) = -1; /* illegal value */ + spi_min_period(starget) = 0; spi_offset(starget) = 0; /* async */ + spi_max_offset(starget) = 255; spi_width(starget) = 0; /* narrow */ + spi_max_width(starget) = 1; spi_iu(starget) = 0; /* no IU */ spi_dt(starget) = 0; /* ST */ spi_qas(starget) = 0; @@ -235,6 +238,34 @@ static int spi_setup_transport_attrs(struct device *dev) return 0; } +#define spi_transport_show_simple(field, format_string) \ + \ +static ssize_t \ +show_spi_transport_##field(struct class_device *cdev, char *buf) \ +{ \ + struct scsi_target *starget = transport_class_to_starget(cdev); \ + struct spi_transport_attrs *tp; \ + \ + tp = (struct spi_transport_attrs *)&starget->starget_data; \ + return snprintf(buf, 20, format_string, tp->field); \ +} + +#define spi_transport_store_simple(field, format_string) \ + \ +static ssize_t \ +store_spi_transport_##field(struct class_device *cdev, const char *buf, \ + size_t count) \ +{ \ + int val; \ + struct scsi_target *starget = transport_class_to_starget(cdev); \ + struct spi_transport_attrs *tp; \ + \ + tp = (struct spi_transport_attrs *)&starget->starget_data; \ + val = simple_strtoul(buf, NULL, 0); \ + tp->field = val; \ + return count; \ +} + #define spi_transport_show_function(field, format_string) \ \ static ssize_t \ @@ -261,6 +292,25 @@ store_spi_transport_##field(struct class_device *cdev, const char *buf, \ struct spi_internal *i = to_spi_internal(shost->transportt); \ \ val = simple_strtoul(buf, NULL, 0); \ + i->f->set_##field(starget, val); \ + return count; \ +} + +#define spi_transport_store_max(field, format_string) \ +static ssize_t \ +store_spi_transport_##field(struct class_device *cdev, const char *buf, \ + size_t count) \ +{ \ + int val; \ + struct scsi_target *starget = transport_class_to_starget(cdev); \ + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); \ + struct spi_internal *i = to_spi_internal(shost->transportt); \ + struct spi_transport_attrs *tp \ + = (struct spi_transport_attrs *)&starget->starget_data; \ + \ + val = simple_strtoul(buf, NULL, 0); \ + if (val > tp->max_##field) \ + val = tp->max_##field; \ i->f->set_##field(starget, val); \ return count; \ } @@ -272,9 +322,24 @@ static CLASS_DEVICE_ATTR(field, S_IRUGO | S_IWUSR, \ show_spi_transport_##field, \ store_spi_transport_##field); +#define spi_transport_simple_attr(field, format_string) \ + spi_transport_show_simple(field, format_string) \ + spi_transport_store_simple(field, format_string) \ +static CLASS_DEVICE_ATTR(field, S_IRUGO | S_IWUSR, \ + show_spi_transport_##field, \ + store_spi_transport_##field); + +#define spi_transport_max_attr(field, format_string) \ + spi_transport_show_function(field, format_string) \ + spi_transport_store_max(field, format_string) \ + spi_transport_simple_attr(max_##field, format_string) \ +static CLASS_DEVICE_ATTR(field, S_IRUGO | S_IWUSR, \ + show_spi_transport_##field, \ + store_spi_transport_##field); + /* The Parallel SCSI Tranport Attributes: */ -spi_transport_rd_attr(offset, "%d\n"); -spi_transport_rd_attr(width, "%d\n"); +spi_transport_max_attr(offset, "%d\n"); +spi_transport_max_attr(width, "%d\n"); spi_transport_rd_attr(iu, "%d\n"); spi_transport_rd_attr(dt, "%d\n"); spi_transport_rd_attr(qas, "%d\n"); @@ -300,26 +365,18 @@ static CLASS_DEVICE_ATTR(revalidate, S_IWUSR, NULL, store_spi_revalidate); /* Translate the period into ns according to the current spec * for SDTR/PPR messages */ -static ssize_t show_spi_transport_period(struct class_device *cdev, char *buf) - +static ssize_t +show_spi_transport_period_helper(struct class_device *cdev, char *buf, + int period) { - struct scsi_target *starget = transport_class_to_starget(cdev); - struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); - struct spi_transport_attrs *tp; int len, picosec; - struct spi_internal *i = to_spi_internal(shost->transportt); - - tp = (struct spi_transport_attrs *)&starget->starget_data; - - if (i->f->get_period) - i->f->get_period(starget); - if (tp->period < 0 || tp->period > 0xff) { + if (period < 0 || period > 0xff) { picosec = -1; - } else if (tp->period <= SPI_STATIC_PPR) { - picosec = ppr_to_ps[tp->period]; + } else if (period <= SPI_STATIC_PPR) { + picosec = ppr_to_ps[period]; } else { - picosec = tp->period * 4000; + picosec = period * 4000; } if (picosec == -1) { @@ -334,12 +391,9 @@ static ssize_t show_spi_transport_period(struct class_device *cdev, char *buf) } static ssize_t -store_spi_transport_period(struct class_device *cdev, const char *buf, - size_t count) +store_spi_transport_period_helper(struct class_device *cdev, const char *buf, + size_t count, int *periodp) { - struct scsi_target *starget = transport_class_to_starget(cdev); - struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); - struct spi_internal *i = to_spi_internal(shost->transportt); int j, picosec, period = -1; char *endp; @@ -368,15 +422,79 @@ store_spi_transport_period(struct class_device *cdev, const char *buf, if (period > 0xff) period = 0xff; - i->f->set_period(starget, period); + *periodp = period; return count; } +static ssize_t +show_spi_transport_period(struct class_device *cdev, char *buf) +{ + struct scsi_target *starget = transport_class_to_starget(cdev); + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct spi_internal *i = to_spi_internal(shost->transportt); + struct spi_transport_attrs *tp = + (struct spi_transport_attrs *)&starget->starget_data; + + if (i->f->get_period) + i->f->get_period(starget); + + return show_spi_transport_period_helper(cdev, buf, tp->period); +} + +static ssize_t +store_spi_transport_period(struct class_device *cdev, const char *buf, + size_t count) +{ + struct scsi_target *starget = transport_class_to_starget(cdev); + struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); + struct spi_internal *i = to_spi_internal(shost->transportt); + struct spi_transport_attrs *tp = + (struct spi_transport_attrs *)&starget->starget_data; + int period, retval; + + retval = store_spi_transport_period_helper(cdev, buf, count, &period); + + if (period < tp->min_period) + period = tp->min_period; + + i->f->set_period(starget, period); + + return retval; +} + static CLASS_DEVICE_ATTR(period, S_IRUGO | S_IWUSR, show_spi_transport_period, store_spi_transport_period); +static ssize_t +show_spi_transport_min_period(struct class_device *cdev, char *buf) +{ + struct scsi_target *starget = transport_class_to_starget(cdev); + struct spi_transport_attrs *tp = + (struct spi_transport_attrs *)&starget->starget_data; + + return show_spi_transport_period_helper(cdev, buf, tp->min_period); +} + +static ssize_t +store_spi_transport_min_period(struct class_device *cdev, const char *buf, + size_t count) +{ + struct scsi_target *starget = transport_class_to_starget(cdev); + struct spi_transport_attrs *tp = + (struct spi_transport_attrs *)&starget->starget_data; + + return store_spi_transport_period_helper(cdev, buf, count, + &tp->min_period); +} + + +static CLASS_DEVICE_ATTR(min_period, S_IRUGO | S_IWUSR, + show_spi_transport_min_period, + store_spi_transport_min_period); + + static ssize_t show_spi_host_signalling(struct class_device *cdev, char *buf) { struct Scsi_Host *shost = transport_class_to_shost(cdev); @@ -642,6 +760,7 @@ spi_dv_device_internal(struct scsi_request *sreq, u8 *buffer) { struct spi_internal *i = to_spi_internal(sreq->sr_host->transportt); struct scsi_device *sdev = sreq->sr_device; + struct scsi_target *starget = sdev->sdev_target; int len = sdev->inquiry_len; /* first set us up for narrow async */ DV_SET(offset, 0); @@ -655,9 +774,11 @@ spi_dv_device_internal(struct scsi_request *sreq, u8 *buffer) } /* test width */ - if (i->f->set_width && sdev->wdtr) { + if (i->f->set_width && spi_max_width(starget) && sdev->wdtr) { i->f->set_width(sdev->sdev_target, 1); + printk("WIDTH IS %d\n", spi_max_width(starget)); + if (spi_dv_device_compare_inquiry(sreq, buffer, buffer + len, DV_LOOPS) @@ -684,8 +805,8 @@ spi_dv_device_internal(struct scsi_request *sreq, u8 *buffer) retry: /* now set up to the maximum */ - DV_SET(offset, 255); - DV_SET(period, 1); + DV_SET(offset, spi_max_offset(starget)); + DV_SET(period, spi_min_period(starget)); if (len == 0) { SPI_PRINTK(sdev->sdev_target, KERN_INFO, "Domain Validation skipping write tests\n"); @@ -892,6 +1013,16 @@ EXPORT_SYMBOL(spi_display_xfer_agreement); if (i->f->show_##field) \ count++ +#define SETUP_RELATED_ATTRIBUTE(field, rel_field) \ + i->private_attrs[count] = class_device_attr_##field; \ + if (!i->f->set_##rel_field) { \ + i->private_attrs[count].attr.mode = S_IRUGO; \ + i->private_attrs[count].store = NULL; \ + } \ + i->attrs[count] = &i->private_attrs[count]; \ + if (i->f->show_##rel_field) \ + count++ + #define SETUP_HOST_ATTRIBUTE(field) \ i->private_host_attrs[count] = class_device_attr_##field; \ if (!i->f->set_##field) { \ @@ -975,8 +1106,11 @@ spi_attach_transport(struct spi_function_template *ft) i->f = ft; SETUP_ATTRIBUTE(period); + SETUP_RELATED_ATTRIBUTE(min_period, period); SETUP_ATTRIBUTE(offset); + SETUP_RELATED_ATTRIBUTE(max_offset, offset); SETUP_ATTRIBUTE(width); + SETUP_RELATED_ATTRIBUTE(max_width, width); SETUP_ATTRIBUTE(iu); SETUP_ATTRIBUTE(dt); SETUP_ATTRIBUTE(qas); diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index 33fbda79f35..0b10169961e 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c @@ -126,18 +126,8 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id, struct pt_regs *r flag = TTY_FRAME; } - if ((rxs & port->ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); - } - if ((rxs & RXSTAT_OVERRUN) && - tty->flip.count < TTY_FLIPBUF_SIZE) { - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character. - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } + uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag); + status = *CSR_UARTFLG; } tty_flip_buffer_push(tty); diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 0d9358608fd..30e8beb7143 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -682,8 +682,6 @@ static void autoconfig_16550a(struct uart_8250_port *up) * from EXCR1. Switch back to bank 0, change it in MCR. Then * switch back to bank 2, read it from EXCR1 again and check * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2 - * On PowerPC we don't want to change baud_base, as we have - * a number of different divisors. -- Tom Rini */ serial_outp(up, UART_LCR, 0); status1 = serial_in(up, UART_MCR); @@ -699,16 +697,25 @@ static void autoconfig_16550a(struct uart_8250_port *up) serial_outp(up, UART_MCR, status1); if ((status2 ^ status1) & UART_MCR_LOOP) { -#ifndef CONFIG_PPC + unsigned short quot; + serial_outp(up, UART_LCR, 0xE0); + + quot = serial_inp(up, UART_DLM) << 8; + quot += serial_inp(up, UART_DLL); + quot <<= 3; + status1 = serial_in(up, 0x04); /* EXCR1 */ status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ serial_outp(up, 0x04, status1); + + serial_outp(up, UART_DLL, quot & 0xff); + serial_outp(up, UART_DLM, quot >> 8); + serial_outp(up, UART_LCR, 0); - up->port.uartclk = 921600*16; -#endif + up->port.uartclk = 921600*16; up->port.type = PORT_NS16550A; up->capabilities |= UART_NATSEMI; return; @@ -1122,18 +1129,9 @@ receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs) } if (uart_handle_sysrq_char(&up->port, ch, regs)) goto ignore_char; - if ((lsr & up->port.ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); - } - if ((lsr & UART_LSR_OE) && - tty->flip.count < TTY_FLIPBUF_SIZE) { - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character. - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } + + uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag); + ignore_char: lsr = serial_inp(up, UART_LSR); } while ((lsr & UART_LSR_DR) && (max_count-- > 0)); diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index f2a5e2933c4..2884b310e54 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -198,18 +198,8 @@ pl010_rx_chars(struct uart_port *port) if (uart_handle_sysrq_char(port, ch, regs)) goto ignore_char; - if ((rsr & port->ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); - } - if ((rsr & UART01x_RSR_OE) && - tty->flip.count < TTY_FLIPBUF_SIZE) { - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } + uart_insert_char(port, rsr, UART01x_RSR_OE, ch, flag); + ignore_char: status = UART_GET_FR(port); } diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index d5cbef3fe8b..7db88ee18f7 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -163,18 +163,8 @@ pl011_rx_chars(struct uart_amba_port *uap) if (uart_handle_sysrq_char(&uap->port, ch, regs)) goto ignore_char; - if ((rsr & uap->port.ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); - } - if ((rsr & UART01x_RSR_OE) && - tty->flip.count < TTY_FLIPBUF_SIZE) { - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } + uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); + ignore_char: status = readw(uap->port.membase + UART01x_FR); } diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c index 6242f3090a9..e92522b33c4 100644 --- a/drivers/serial/clps711x.c +++ b/drivers/serial/clps711x.c @@ -143,10 +143,7 @@ static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *re * CHECK: does overrun affect the current character? * ASSUMPTION: it does not. */ - if ((ch & port->ignore_status_mask & ~RXSTAT_OVERRUN) == 0) - tty_insert_flip_char(tty, ch, flg); - if ((ch & ~port->ignore_status_mask & RXSTAT_OVERRUN) == 0) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + uart_insert_char(port, ch, UARTDR_OVERR, ch, flg); ignore_char: status = clps_readl(SYSFLG(port)); diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index 51d8a49f447..9dc151d8fa6 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c @@ -161,20 +161,12 @@ receive_chars(struct uart_pxa_port *up, int *status, struct pt_regs *regs) else if (*status & UART_LSR_FE) flag = TTY_FRAME; } + if (uart_handle_sysrq_char(&up->port, ch, regs)) goto ignore_char; - if ((*status & up->port.ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); - } - if ((*status & UART_LSR_OE) && - tty->flip.count < TTY_FLIPBUF_SIZE) { - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character. - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } + + uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag); + ignore_char: *status = serial_in(up, UART_LSR); } while ((*status & UART_LSR_DR) && (max_count-- > 0)); diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c index 435750d40a4..2a9f7ade2c9 100644 --- a/drivers/serial/s3c2410.c +++ b/drivers/serial/s3c2410.c @@ -394,20 +394,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id, struct pt_regs *regs) if (uart_handle_sysrq_char(port, ch, regs)) goto ignore_char; - if ((uerstat & port->ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); - } - - if ((uerstat & S3C2410_UERSTAT_OVERRUN) && - tty->flip.count < TTY_FLIPBUF_SIZE) { - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character. - */ - - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } + uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, ch, flag); ignore_char: continue; diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index 157218bc6c6..22565a67a57 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c @@ -237,10 +237,7 @@ sa1100_rx_chars(struct sa1100_port *sport, struct pt_regs *regs) if (uart_handle_sysrq_char(&sport->port, ch, regs)) goto ignore_char; - if ((status & port->ignore_status_mask & ~UTSR1_TO_SM(UTSR1_ROR)) == 0) - tty_insert_flip_char(tty, ch, flg); - if (status & ~port->ignore_status_mask & UTSR1_TO_SM(UTSR1_ROR)) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + uart_insert_char(&sport->port, status, UTSR1_TO_SM(UTSR1_ROR), ch, flg); ignore_char: status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) | diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 6eeb48f6a48..0d7b65f93e8 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -661,10 +661,10 @@ void serial_config(dev_link_t * link) /* Is this a multiport card? */ tuple->DesiredTuple = CISTPL_MANFID; if (first_tuple(handle, tuple, parse) == CS_SUCCESS) { - info->manfid = le16_to_cpu(buf[0]); + info->manfid = parse->manfid.manf; for (i = 0; i < MULTI_COUNT; i++) if ((info->manfid == multi_id[i].manfid) && - (le16_to_cpu(buf[1]) == multi_id[i].prodid)) + (parse->manfid.card == multi_id[i].prodid)) break; if (i < MULTI_COUNT) info->multi = multi_id[i].multi; diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c index 85cfa08d3ba..56f269b6bfb 100644 --- a/drivers/serial/serial_lh7a40x.c +++ b/drivers/serial/serial_lh7a40x.c @@ -190,18 +190,7 @@ lh7a40xuart_rx_chars (struct uart_port* port) if (uart_handle_sysrq_char (port, (unsigned char) data, regs)) continue; - if ((data & port->ignore_status_mask) == 0) { - tty_insert_flip_char(tty, data, flag); - } - if ((data & RxOverrunError) - && tty->flip.count < TTY_FLIPBUF_SIZE) { - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } + uart_insert_char(port, data, RxOverrunError, data, flag); } tty_flip_buffer_push (tty); return; diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c index 37b2ef297cb..3f1051a4a13 100644 --- a/drivers/serial/serial_txx9.c +++ b/drivers/serial/serial_txx9.c @@ -350,18 +350,9 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status, struct pt_regs *r } if (uart_handle_sysrq_char(&up->port, ch, regs)) goto ignore_char; - if ((disr & up->port.ignore_status_mask) == 0) { - tty_insert_flip_char(tty, ch, flag); - } - if ((disr & TXX9_SIDISR_UOER) && - tty->flip.count < TTY_FLIPBUF_SIZE) { - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character. - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } + + uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag); + ignore_char: disr = sio_in(up, TXX9_SIDISR); } while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0)); diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index 39b788d95e3..10e2990a40d 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -61,6 +61,16 @@ struct uart_sunsab_port { unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */ unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */ int type; /* SAB82532 version */ + + /* Setting configuration bits while the transmitter is active + * can cause garbage characters to get emitted by the chip. + * Therefore, we cache such writes here and do the real register + * write the next time the transmitter becomes idle. + */ + unsigned int cached_ebrg; + unsigned char cached_mode; + unsigned char cached_pvr; + unsigned char cached_dafo; }; /* @@ -236,6 +246,7 @@ receive_chars(struct uart_sunsab_port *up, } static void sunsab_stop_tx(struct uart_port *, unsigned int); +static void sunsab_tx_idle(struct uart_sunsab_port *); static void transmit_chars(struct uart_sunsab_port *up, union sab82532_irq_status *stat) @@ -258,6 +269,7 @@ static void transmit_chars(struct uart_sunsab_port *up, return; set_bit(SAB82532_XPR, &up->irqflags); + sunsab_tx_idle(up); if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { up->interrupt_mask1 |= SAB82532_IMR1_XPR; @@ -397,21 +409,21 @@ static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl) struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; if (mctrl & TIOCM_RTS) { - writeb(readb(&up->regs->rw.mode) & ~SAB82532_MODE_FRTS, - &up->regs->rw.mode); - writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS, - &up->regs->rw.mode); + up->cached_mode &= ~SAB82532_MODE_FRTS; + up->cached_mode |= SAB82532_MODE_RTS; } else { - writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_FRTS, - &up->regs->rw.mode); - writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS, - &up->regs->rw.mode); + up->cached_mode |= (SAB82532_MODE_FRTS | + SAB82532_MODE_RTS); } if (mctrl & TIOCM_DTR) { - writeb(readb(&up->regs->rw.pvr) & ~(up->pvr_dtr_bit), &up->regs->rw.pvr); + up->cached_pvr &= ~(up->pvr_dtr_bit); } else { - writeb(readb(&up->regs->rw.pvr) | up->pvr_dtr_bit, &up->regs->rw.pvr); + up->cached_pvr |= up->pvr_dtr_bit; } + + set_bit(SAB82532_REGS_PENDING, &up->irqflags); + if (test_bit(SAB82532_XPR, &up->irqflags)) + sunsab_tx_idle(up); } /* port->lock is not held. */ @@ -450,6 +462,25 @@ static void sunsab_stop_tx(struct uart_port *port, unsigned int tty_stop) } /* port->lock held by caller. */ +static void sunsab_tx_idle(struct uart_sunsab_port *up) +{ + if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) { + u8 tmp; + + clear_bit(SAB82532_REGS_PENDING, &up->irqflags); + writeb(up->cached_mode, &up->regs->rw.mode); + writeb(up->cached_pvr, &up->regs->rw.pvr); + writeb(up->cached_dafo, &up->regs->w.dafo); + + writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr); + tmp = readb(&up->regs->rw.ccr2); + tmp &= ~0xc0; + tmp |= (up->cached_ebrg >> 2) & 0xc0; + writeb(tmp, &up->regs->rw.ccr2); + } +} + +/* port->lock held by caller. */ static void sunsab_start_tx(struct uart_port *port, unsigned int tty_start) { struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; @@ -517,12 +548,16 @@ static void sunsab_break_ctl(struct uart_port *port, int break_state) spin_lock_irqsave(&up->port.lock, flags); - val = readb(&up->regs->rw.dafo); + val = up->cached_dafo; if (break_state) val |= SAB82532_DAFO_XBRK; else val &= ~SAB82532_DAFO_XBRK; - writeb(val, &up->regs->rw.dafo); + up->cached_dafo = val; + + set_bit(SAB82532_REGS_PENDING, &up->irqflags); + if (test_bit(SAB82532_XPR, &up->irqflags)) + sunsab_tx_idle(up); spin_unlock_irqrestore(&up->port.lock, flags); } @@ -566,8 +601,9 @@ static int sunsab_startup(struct uart_port *port) SAB82532_CCR2_TOE, &up->regs->w.ccr2); writeb(0, &up->regs->w.ccr3); writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4); - writeb(SAB82532_MODE_RTS | SAB82532_MODE_FCTS | - SAB82532_MODE_RAC, &up->regs->w.mode); + up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS | + SAB82532_MODE_RAC); + writeb(up->cached_mode, &up->regs->w.mode); writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc); tmp = readb(&up->regs->rw.ccr0); @@ -598,7 +634,6 @@ static void sunsab_shutdown(struct uart_port *port) { struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; unsigned long flags; - unsigned char tmp; spin_lock_irqsave(&up->port.lock, flags); @@ -609,14 +644,13 @@ static void sunsab_shutdown(struct uart_port *port) writeb(up->interrupt_mask1, &up->regs->w.imr1); /* Disable break condition */ - tmp = readb(&up->regs->rw.dafo); - tmp &= ~SAB82532_DAFO_XBRK; - writeb(tmp, &up->regs->rw.dafo); + up->cached_dafo = readb(&up->regs->rw.dafo); + up->cached_dafo &= ~SAB82532_DAFO_XBRK; + writeb(up->cached_dafo, &up->regs->rw.dafo); /* Disable Receiver */ - tmp = readb(&up->regs->rw.mode); - tmp &= ~SAB82532_MODE_RAC; - writeb(tmp, &up->regs->rw.mode); + up->cached_mode &= ~SAB82532_MODE_RAC; + writeb(up->cached_mode, &up->regs->rw.mode); /* * XXX FIXME @@ -685,7 +719,6 @@ static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cfla unsigned int iflag, unsigned int baud, unsigned int quot) { - unsigned int ebrg; unsigned char dafo; int bits, n, m; @@ -714,10 +747,11 @@ static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cfla } else { dafo |= SAB82532_DAFO_PAR_EVEN; } + up->cached_dafo = dafo; calc_ebrg(baud, &n, &m); - ebrg = n | (m << 6); + up->cached_ebrg = n | (m << 6); up->tec_timeout = (10 * 1000000) / baud; up->cec_timeout = up->tec_timeout >> 2; @@ -770,16 +804,13 @@ static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cfla uart_update_timeout(&up->port, cflag, (up->port.uartclk / (16 * quot))); - /* Now bang the new settings into the chip. */ - sunsab_cec_wait(up); - sunsab_tec_wait(up); - writeb(dafo, &up->regs->w.dafo); - writeb(ebrg & 0xff, &up->regs->w.bgr); - writeb((readb(&up->regs->rw.ccr2) & ~0xc0) | ((ebrg >> 2) & 0xc0), - &up->regs->rw.ccr2); - - writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RAC, &up->regs->rw.mode); - + /* Now schedule a register update when the chip's + * transmitter is idle. + */ + up->cached_mode |= SAB82532_MODE_RAC; + set_bit(SAB82532_REGS_PENDING, &up->irqflags); + if (test_bit(SAB82532_XPR, &up->irqflags)) + sunsab_tx_idle(up); } /* port->lock is not held. */ @@ -1084,11 +1115,13 @@ static void __init sunsab_init_hw(void) up->pvr_dsr_bit = (1 << 3); up->pvr_dtr_bit = (1 << 2); } - writeb((1 << 1) | (1 << 2) | (1 << 4), &up->regs->w.pvr); - writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_FRTS, - &up->regs->rw.mode); - writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS, - &up->regs->rw.mode); + up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4); + writeb(up->cached_pvr, &up->regs->w.pvr); + up->cached_mode = readb(&up->regs->rw.mode); + up->cached_mode |= SAB82532_MODE_FRTS; + writeb(up->cached_mode, &up->regs->rw.mode); + up->cached_mode |= SAB82532_MODE_RTS; + writeb(up->cached_mode, &up->regs->rw.mode); up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT; up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT; diff --git a/drivers/serial/sunsab.h b/drivers/serial/sunsab.h index 686086fcbbf..b78e1f7b805 100644 --- a/drivers/serial/sunsab.h +++ b/drivers/serial/sunsab.h @@ -126,6 +126,7 @@ union sab82532_irq_status { /* irqflags bits */ #define SAB82532_ALLS 0x00000001 #define SAB82532_XPR 0x00000002 +#define SAB82532_REGS_PENDING 0x00000004 /* RFIFO Status Byte */ #define SAB82532_RSTAT_PE 0x80 diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c index 307886199f2..5d2ceb623e6 100644 --- a/drivers/serial/vr41xx_siu.c +++ b/drivers/serial/vr41xx_siu.c @@ -412,10 +412,8 @@ static inline void receive_chars(struct uart_port *port, uint8_t *status, if (uart_handle_sysrq_char(port, ch, regs)) goto ignore_char; - if ((lsr & port->ignore_status_mask) == 0) - tty_insert_flip_char(tty, ch, flag); - if ((lsr & UART_LSR_OE) && (tty->flip.count < TTY_FLIPBUF_SIZE)) - tty_insert_flip_char(tty, 0, TTY_OVERRUN); + + uart_insert_char(port, lsr, UART_LSR_OE, ch, flag); ignore_char: lsr = siu_read(port, UART_LSR); diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index 233f9229bad..2a1697bfd69 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -386,6 +386,8 @@ static void speedtch_poll_status(struct speedtch_instance_data *instance) if (instance->u.atm_dev->signal != ATM_PHY_SIG_LOST) { instance->u.atm_dev->signal = ATM_PHY_SIG_LOST; printk(KERN_NOTICE "ADSL line is down\n"); + /* It'll never resync again unless we ask it to... */ + speedtch_start_synchro(instance); } break; diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index ec9b3bde8ae..4d0c9e65cd0 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -286,6 +286,37 @@ static ssize_t show_interface_string(struct device *dev, char *buf) } static DEVICE_ATTR(interface, S_IRUGO, show_interface_string, NULL); +static ssize_t show_modalias(struct device *dev, char *buf) +{ + struct usb_interface *intf; + struct usb_device *udev; + int len; + + intf = to_usb_interface(dev); + udev = interface_to_usbdev(intf); + + len = sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct), + le16_to_cpu(udev->descriptor.bcdDevice), + udev->descriptor.bDeviceClass, + udev->descriptor.bDeviceSubClass, + udev->descriptor.bDeviceProtocol); + buf += len; + + if (udev->descriptor.bDeviceClass == 0) { + struct usb_host_interface *alt = intf->cur_altsetting; + + return len + sprintf(buf, "%02Xisc%02Xip%02X\n", + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol); + } else { + return len + sprintf(buf, "*isc*ip*\n"); + } +} +static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL); + static struct attribute *intf_attrs[] = { &dev_attr_bInterfaceNumber.attr, &dev_attr_bAlternateSetting.attr, @@ -293,6 +324,7 @@ static struct attribute *intf_attrs[] = { &dev_attr_bInterfaceClass.attr, &dev_attr_bInterfaceSubClass.attr, &dev_attr_bInterfaceProtocol.attr, + &dev_attr_modalias.attr, NULL, }; static struct attribute_group intf_attr_grp = { diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 3196c3265ff..19e598c9641 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -124,3 +124,14 @@ config USB_SL811_HCD To compile this driver as a module, choose M here: the module will be called sl811-hcd. +config USB_SL811_CS + tristate "CF/PCMCIA support for SL811HS HCD" + depends on USB_SL811_HCD && PCMCIA + default N + help + Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC + REX-CFU1U CF card (often used with PDAs). If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called "sl811_cs". + diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index a574ca06cf6..5dbd3e7a27c 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -7,4 +7,5 @@ obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o +obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 02fefab3501..429330bc38d 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -72,6 +72,7 @@ static int ehci_hub_suspend (struct usb_hcd *hcd) } /* turn off now-idle HC */ + del_timer_sync (&ehci->watchdog); ehci_halt (ehci); hcd->state = HC_STATE_SUSPENDED; diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index a374b769207..99d43f758ad 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -2,8 +2,8 @@ * SL811HS HCD (Host Controller Driver) for USB. * * Copyright (C) 2004 Psion Teklogix (for NetBook PRO) - * Copyright (C) 2004 David Brownell - * + * Copyright (C) 2004-2005 David Brownell + * * Periodic scheduling is based on Roman's OHCI code * Copyright (C) 1999 Roman Weissgaerber * @@ -15,7 +15,7 @@ * For documentation, see the SL811HS spec and the "SL811HS Embedded Host" * document (providing significant pieces missing from that spec); plus * the SL811S spec if you want peripheral side info. - */ + */ /* * Status: Passed basic stress testing, works with hubs, mice, keyboards, @@ -67,7 +67,7 @@ MODULE_DESCRIPTION("SL811HS USB Host Controller Driver"); MODULE_LICENSE("GPL"); -#define DRIVER_VERSION "15 Dec 2004" +#define DRIVER_VERSION "19 May 2005" #ifndef DEBUG @@ -121,6 +121,10 @@ static void port_power(struct sl811 *sl811, int is_on) /* reset as thoroughly as we can */ if (sl811->board && sl811->board->reset) sl811->board->reset(hcd->self.controller); + else { + sl811_write(sl811, SL11H_CTLREG1, SL11H_CTL1MASK_SE0); + mdelay(20); + } sl811_write(sl811, SL11H_IRQ_ENABLE, 0); sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1); @@ -443,6 +447,7 @@ static void finish_request( spin_lock(&urb->lock); if (urb->status == -EINPROGRESS) urb->status = status; + urb->hcpriv = NULL; spin_unlock(&urb->lock); spin_unlock(&sl811->lock); @@ -472,7 +477,7 @@ static void finish_request( if (*prev) *prev = ep->next; sl811->load[i] -= ep->load; - } + } ep->branch = PERIODIC_SIZE; sl811->periodic_count--; sl811_to_hcd(sl811)->self.bandwidth_allocated @@ -661,9 +666,9 @@ retry: #ifdef QUIRK2 /* this may no longer be necessary ... */ - if (irqstat == 0 && ret == IRQ_NONE) { + if (irqstat == 0) { irqstat = checkdone(sl811); - if (irqstat /* && irq != ~0 */ ) + if (irqstat) sl811->stat_lost++; } #endif @@ -722,7 +727,8 @@ retry: if (sl811->active_a) { sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), 0); finish_request(sl811, sl811->active_a, - container_of(sl811->active_a->hep->urb_list.next, + container_of(sl811->active_a + ->hep->urb_list.next, struct urb, urb_list), NULL, -ESHUTDOWN); sl811->active_a = NULL; @@ -731,7 +737,8 @@ retry: if (sl811->active_b) { sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG), 0); finish_request(sl811, sl811->active_b, - container_of(sl811->active_b->hep->urb_list.next, + container_of(sl811->active_b + ->hep->urb_list.next, struct urb, urb_list), NULL, -ESHUTDOWN); sl811->active_b = NULL; @@ -761,7 +768,7 @@ retry: goto retry; } - if (sl811->periodic_count == 0 && list_empty(&sl811->async)) + if (sl811->periodic_count == 0 && list_empty(&sl811->async)) sofirq_off(sl811); sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable); @@ -796,7 +803,7 @@ static int balance(struct sl811 *sl811, u16 period, u16 load) } if (j < PERIODIC_SIZE) continue; - branch = i; + branch = i; } } return branch; @@ -890,6 +897,7 @@ static int sl811h_urb_enqueue( break; } + ep->hep = hep; hep->hcpriv = ep; } @@ -961,15 +969,16 @@ fail: static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) { struct sl811 *sl811 = hcd_to_sl811(hcd); - struct usb_host_endpoint *hep = urb->hcpriv; + struct usb_host_endpoint *hep; unsigned long flags; struct sl811h_ep *ep; int retval = 0; + spin_lock_irqsave(&sl811->lock, flags); + hep = urb->hcpriv; if (!hep) - return -EINVAL; + goto fail; - spin_lock_irqsave(&sl811->lock, flags); ep = hep->hcpriv; if (ep) { /* finish right away if this urb can't be active ... @@ -1017,6 +1026,7 @@ static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) VDBG("dequeue, urb %p active %s; wait4irq\n", urb, (sl811->active_a == ep) ? "A" : "B"); } else +fail: retval = -EINVAL; spin_unlock_irqrestore(&sl811->lock, flags); return retval; @@ -1576,6 +1586,9 @@ sl811h_start(struct usb_hcd *hcd) if (sl811->board && sl811->board->power) hub_set_power_budget(udev, sl811->board->power * 2); + /* enable power and interupts */ + port_power(sl811, 1); + return 0; } @@ -1618,7 +1631,7 @@ static struct hc_driver sl811h_hc_driver = { /*-------------------------------------------------------------------------*/ -static int __init_or_module +static int __devexit sl811h_remove(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -1631,21 +1644,20 @@ sl811h_remove(struct device *dev) remove_debug_file(sl811); usb_remove_hcd(hcd); - iounmap(sl811->data_reg); + /* some platforms may use IORESOURCE_IO */ res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - release_mem_region(res->start, 1); + if (res) + iounmap(sl811->data_reg); - iounmap(sl811->addr_reg); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, 1); + if (res) + iounmap(sl811->addr_reg); usb_put_hcd(hcd); return 0; } -#define resource_len(r) (((r)->end - (r)->start) + 1) - -static int __init +static int __devinit sl811h_probe(struct device *dev) { struct usb_hcd *hcd; @@ -1656,7 +1668,7 @@ sl811h_probe(struct device *dev) void __iomem *addr_reg; void __iomem *data_reg; int retval; - u8 tmp; + u8 tmp, ioaddr = 0; /* basic sanity checks first. board-specific init logic should * have initialized these three resources and probably board @@ -1664,13 +1676,8 @@ sl811h_probe(struct device *dev) * minimal sanity checking. */ pdev = container_of(dev, struct platform_device, dev); - if (pdev->num_resources < 3) - return -ENODEV; - - addr = platform_get_resource(pdev, IORESOURCE_MEM, 0); - data = platform_get_resource(pdev, IORESOURCE_MEM, 1); irq = platform_get_irq(pdev, 0); - if (!addr || !data || irq < 0) + if (pdev->num_resources < 3 || irq < 0) return -ENODEV; /* refuse to confuse usbcore */ @@ -1679,24 +1686,31 @@ sl811h_probe(struct device *dev) return -EINVAL; } - if (!request_mem_region(addr->start, 1, hcd_name)) { - retval = -EBUSY; - goto err1; - } - addr_reg = ioremap(addr->start, resource_len(addr)); - if (addr_reg == NULL) { - retval = -ENOMEM; - goto err2; - } + /* the chip may be wired for either kind of addressing */ + addr = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data = platform_get_resource(pdev, IORESOURCE_MEM, 1); + retval = -EBUSY; + if (!addr || !data) { + addr = platform_get_resource(pdev, IORESOURCE_IO, 0); + data = platform_get_resource(pdev, IORESOURCE_IO, 1); + if (!addr || !data) + return -ENODEV; + ioaddr = 1; + + addr_reg = (void __iomem *) addr->start; + data_reg = (void __iomem *) data->start; + } else { + addr_reg = ioremap(addr->start, 1); + if (addr_reg == NULL) { + retval = -ENOMEM; + goto err2; + } - if (!request_mem_region(data->start, 1, hcd_name)) { - retval = -EBUSY; - goto err3; - } - data_reg = ioremap(data->start, resource_len(addr)); - if (data_reg == NULL) { - retval = -ENOMEM; - goto err4; + data_reg = ioremap(data->start, 1); + if (data_reg == NULL) { + retval = -ENOMEM; + goto err4; + } } /* allocate and initialize hcd */ @@ -1737,12 +1751,14 @@ sl811h_probe(struct device *dev) goto err6; } - /* sl811s would need a different handler for this irq */ -#ifdef CONFIG_ARM - /* Cypress docs say the IRQ is IRQT_HIGH ... */ - set_irq_type(irq, IRQT_RISING); -#endif - retval = usb_add_hcd(hcd, irq, SA_INTERRUPT); + /* The chip's IRQ is level triggered, active high. A requirement + * for platform device setup is to cope with things like signal + * inverters (e.g. CF is active low) or working only with edge + * triggers (e.g. most ARM CPUs). Initial driver stress testing + * was on a system with single edge triggering, so most sorts of + * triggering arrangement should work. + */ + retval = usb_add_hcd(hcd, irq, SA_INTERRUPT | SA_SHIRQ); if (retval != 0) goto err6; @@ -1752,14 +1768,12 @@ sl811h_probe(struct device *dev) err6: usb_put_hcd(hcd); err5: - iounmap(data_reg); + if (!ioaddr) + iounmap(data_reg); err4: - release_mem_region(data->start, 1); - err3: - iounmap(addr_reg); + if (!ioaddr) + iounmap(addr_reg); err2: - release_mem_region(addr->start, 1); - err1: DBG("init error, %d\n", retval); return retval; } @@ -1767,7 +1781,7 @@ sl811h_probe(struct device *dev) #ifdef CONFIG_PM /* for this device there's no useful distinction between the controller - * and its root hub, except that the root hub only gets direct PM calls + * and its root hub, except that the root hub only gets direct PM calls * when CONFIG_USB_SUSPEND is enabled. */ @@ -1821,20 +1835,22 @@ sl811h_resume(struct device *dev, u32 phase) #endif -static struct device_driver sl811h_driver = { +/* this driver is exported so sl811_cs can depend on it */ +struct device_driver sl811h_driver = { .name = (char *) hcd_name, .bus = &platform_bus_type, .probe = sl811h_probe, - .remove = sl811h_remove, + .remove = __devexit_p(sl811h_remove), .suspend = sl811h_suspend, .resume = sl811h_resume, }; +EXPORT_SYMBOL(sl811h_driver); /*-------------------------------------------------------------------------*/ - -static int __init sl811h_init(void) + +static int __init sl811h_init(void) { if (usb_disabled()) return -ENODEV; @@ -1844,8 +1860,8 @@ static int __init sl811h_init(void) } module_init(sl811h_init); -static void __exit sl811h_cleanup(void) -{ +static void __exit sl811h_cleanup(void) +{ driver_unregister(&sl811h_driver); } module_exit(sl811h_cleanup); diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c new file mode 100644 index 00000000000..6e173265095 --- /dev/null +++ b/drivers/usb/host/sl811_cs.c @@ -0,0 +1,442 @@ +/* + * PCMCIA driver for SL811HS (as found in REX-CFU1U) + * Filename: sl811_cs.c + * Author: Yukio Yamamoto + * + * Port to sl811-hcd and 2.6.x by + * Botond Botyanszki <boti@rocketmail.com> + * Simon Pickering + * + * Last update: 2005-05-12 + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/ioport.h> + +#include <pcmcia/version.h> +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ds.h> + +#include <linux/usb_sl811.h> + +MODULE_AUTHOR("Botond Botyanszki"); +MODULE_DESCRIPTION("REX-CFU1U PCMCIA driver for 2.6"); +MODULE_LICENSE("GPL"); + + +/*====================================================================*/ +/* MACROS */ +/*====================================================================*/ + +#if defined(DEBUG) || defined(CONFIG_USB_DEBUG) || defined(PCMCIA_DEBUG) + +static int pc_debug = 0; +module_param(pc_debug, int, 0644); + +#define DBG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG "sl811_cs: " args) + +#else +#define DBG(n, args...) do{}while(0) +#endif /* no debugging */ + +#define INFO(args...) printk(KERN_INFO "sl811_cs: " args) + +#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444) + +#define CS_CHECK(fn, ret) \ + do { \ + last_fn = (fn); \ + if ((last_ret = (ret)) != 0) \ + goto cs_failed; \ + } while (0) + +/*====================================================================*/ +/* VARIABLES */ +/*====================================================================*/ + +static const char driver_name[DEV_NAME_LEN] = "sl811_cs"; + +static dev_link_t *dev_list = NULL; + +static int irq_list[4] = { -1 }; +static int irq_list_count; + +module_param_array(irq_list, int, &irq_list_count, 0444); + +INT_MODULE_PARM(irq_mask, 0xdeb8); + +typedef struct local_info_t { + dev_link_t link; + dev_node_t node; +} local_info_t; + +/*====================================================================*/ + +static void release_platform_dev(struct device * dev) +{ + DBG(0, "sl811_cs platform_dev release\n"); + dev->parent = NULL; +} + +static struct sl811_platform_data platform_data = { + .potpg = 100, + .power = 50, /* == 100mA */ + // .reset = ... FIXME: invoke CF reset on the card +}; + +static struct resource resources[] = { + [0] = { + .flags = IORESOURCE_IRQ, + }, + [1] = { + // .name = "address", + .flags = IORESOURCE_IO, + }, + [2] = { + // .name = "data", + .flags = IORESOURCE_IO, + }, +}; + +extern struct device_driver sl811h_driver; + +static struct platform_device platform_dev = { + .id = -1, + .dev = { + .platform_data = &platform_data, + .release = release_platform_dev, + }, + .resource = resources, + .num_resources = ARRAY_SIZE(resources), +}; + +static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq) +{ + if (platform_dev.dev.parent) + return -EBUSY; + platform_dev.dev.parent = parent; + + /* finish seting up the platform device */ + resources[0].start = irq; + + resources[1].start = base_addr; + resources[1].end = base_addr; + + resources[2].start = base_addr + 1; + resources[2].end = base_addr + 1; + + /* The driver core will probe for us. We know sl811-hcd has been + * initialized already because of the link order dependency. + */ + platform_dev.name = sl811h_driver.name; + return platform_device_register(&platform_dev); +} + +/*====================================================================*/ + +static void sl811_cs_detach(dev_link_t *link) +{ + dev_link_t **linkp; + + DBG(0, "sl811_cs_detach(0x%p)\n", link); + + /* Locate device structure */ + for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) { + if (*linkp == link) + break; + } + if (*linkp == NULL) + return; + + /* Break the link with Card Services */ + if (link->handle) + pcmcia_deregister_client(link->handle); + + /* Unlink device structure, and free it */ + *linkp = link->next; + /* This points to the parent local_info_t struct */ + kfree(link->priv); +} + +static void sl811_cs_release(dev_link_t * link) +{ + + DBG(0, "sl811_cs_release(0x%p)\n", link); + + if (link->open) { + DBG(1, "sl811_cs: release postponed, '%s' still open\n", + link->dev->dev_name); + link->state |= DEV_STALE_CONFIG; + return; + } + + /* Unlink the device chain */ + link->dev = NULL; + + platform_device_unregister(&platform_dev); + pcmcia_release_configuration(link->handle); + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + if (link->irq.AssignedIRQ) + pcmcia_release_irq(link->handle, &link->irq); + link->state &= ~DEV_CONFIG; + + if (link->state & DEV_STALE_LINK) + sl811_cs_detach(link); +} + +static void sl811_cs_config(dev_link_t *link) +{ + client_handle_t handle = link->handle; + struct device *parent = &handle_to_dev(handle); + local_info_t *dev = link->priv; + tuple_t tuple; + cisparse_t parse; + int last_fn, last_ret; + u_char buf[64]; + config_info_t conf; + cistpl_cftable_entry_t dflt = { 0 }; + + DBG(0, "sl811_cs_config(0x%p)\n", link); + + tuple.DesiredTuple = CISTPL_CONFIG; + tuple.Attributes = 0; + tuple.TupleData = buf; + tuple.TupleDataMax = sizeof(buf); + tuple.TupleOffset = 0; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple)); + CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse)); + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + + /* Configure card */ + link->state |= DEV_CONFIG; + + /* Look up the current Vcc */ + CS_CHECK(GetConfigurationInfo, + pcmcia_get_configuration_info(handle, &conf)); + link->conf.Vcc = conf.Vcc; + + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple)); + while (1) { + cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); + + if (pcmcia_get_tuple_data(handle, &tuple) != 0 + || pcmcia_parse_tuple(handle, &tuple, &parse) + != 0) + goto next_entry; + + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) { + dflt = *cfg; + } + + if (cfg->index == 0) + goto next_entry; + + link->conf.ConfigIndex = cfg->index; + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { + if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 + != conf.Vcc) + goto next_entry; + } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) { + if (dflt.vcc.param[CISTPL_POWER_VNOM]/10000 + != conf.Vcc) + goto next_entry; + } + + if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; + + /* we need an interrupt */ + if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) + link->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + link->io.NumPorts1 = link->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; + + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + link->io.BasePort1 = io->win[0].base; + link->io.NumPorts1 = io->win[0].len; + + if (pcmcia_request_io(link->handle, &link->io) != 0) + goto next_entry; + } + break; + +next_entry: + if (link->io.NumPorts1) + pcmcia_release_io(link->handle, &link->io); + last_ret = pcmcia_get_next_tuple(handle, &tuple); + } + + /* require an IRQ and two registers */ + if (!link->io.NumPorts1 || link->io.NumPorts1 < 2) + goto cs_failed; + if (link->conf.Attributes & CONF_ENABLE_IRQ) + CS_CHECK(RequestIRQ, + pcmcia_request_irq(link->handle, &link->irq)); + else + goto cs_failed; + + CS_CHECK(RequestConfiguration, + pcmcia_request_configuration(link->handle, &link->conf)); + + sprintf(dev->node.dev_name, driver_name); + dev->node.major = dev->node.minor = 0; + link->dev = &dev->node; + + printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d", + dev->node.dev_name, link->conf.ConfigIndex, + link->conf.Vcc/10, link->conf.Vcc%10); + if (link->conf.Vpp1) + printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10); + printk(", irq %d", link->irq.AssignedIRQ); + printk(", io 0x%04x-0x%04x", link->io.BasePort1, + link->io.BasePort1+link->io.NumPorts1-1); + printk("\n"); + + link->state &= ~DEV_CONFIG_PENDING; + + if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ) + < 0) { +cs_failed: + printk("sl811_cs_config failed\n"); + cs_error(link->handle, last_fn, last_ret); + sl811_cs_release(link); + link->state &= ~DEV_CONFIG_PENDING; + } +} + +static int +sl811_cs_event(event_t event, int priority, event_callback_args_t *args) +{ + dev_link_t *link = args->client_data; + + DBG(1, "sl811_cs_event(0x%06x)\n", event); + + switch (event) { + case CS_EVENT_CARD_REMOVAL: + link->state &= ~DEV_PRESENT; + if (link->state & DEV_CONFIG) + sl811_cs_release(link); + break; + + case CS_EVENT_CARD_INSERTION: + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + sl811_cs_config(link); + break; + + case CS_EVENT_PM_SUSPEND: + link->state |= DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_RESET_PHYSICAL: + if (link->state & DEV_CONFIG) + pcmcia_release_configuration(link->handle); + break; + + case CS_EVENT_PM_RESUME: + link->state &= ~DEV_SUSPEND; + /* Fall through... */ + case CS_EVENT_CARD_RESET: + if (link->state & DEV_CONFIG) + pcmcia_request_configuration(link->handle, &link->conf); + DBG(0, "reset sl811-hcd here?\n"); + break; + } + return 0; +} + +static dev_link_t *sl811_cs_attach(void) +{ + local_info_t *local; + dev_link_t *link; + client_reg_t client_reg; + int ret, i; + + local = kmalloc(sizeof(local_info_t), GFP_KERNEL); + if (!local) + return NULL; + memset(local, 0, sizeof(local_info_t)); + link = &local->link; + link->priv = local; + + /* Initialize */ + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID; + if (irq_list[0] == -1) + link->irq.IRQInfo2 = irq_mask; + else + for (i = 0; i < irq_list_count; i++) + link->irq.IRQInfo2 |= 1 << irq_list[i]; + link->irq.Handler = NULL; + + link->conf.Attributes = 0; + link->conf.Vcc = 33; + link->conf.IntType = INT_MEMORY_AND_IO; + + /* Register with Card Services */ + link->next = dev_list; + dev_list = link; + client_reg.dev_info = (dev_info_t *) &driver_name; + client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE; + client_reg.EventMask = + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.event_handler = &sl811_cs_event; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret != CS_SUCCESS) { + cs_error(link->handle, RegisterClient, ret); + sl811_cs_detach(link); + return NULL; + } + + return link; +} + +static struct pcmcia_driver sl811_cs_driver = { + .owner = THIS_MODULE, + .drv = { + .name = (char *)driver_name, + }, + .attach = sl811_cs_attach, + .detach = sl811_cs_detach, +}; + +/*====================================================================*/ + +static int __init init_sl811_cs(void) +{ + return pcmcia_register_driver(&sl811_cs_driver); +} +module_init(init_sl811_cs); + +static void __exit exit_sl811_cs(void) +{ + pcmcia_unregister_driver(&sl811_cs_driver); +} +module_exit(exit_sl811_cs); diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 869ff73690a..2d8bd9dcc6e 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1315,6 +1315,8 @@ void hid_init_reports(struct hid_device *hid) #define USB_DEVICE_ID_WACOM_INTUOS2 0x0040 #define USB_DEVICE_ID_WACOM_VOLITO 0x0060 #define USB_DEVICE_ID_WACOM_PTU 0x0003 +#define USB_DEVICE_ID_WACOM_INTUOS3 0x00B0 +#define USB_DEVICE_ID_WACOM_CINTIQ 0x003F #define USB_VENDOR_ID_KBGEAR 0x084e #define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001 @@ -1401,6 +1403,7 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_DELORME 0x1163 #define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100 +#define USB_DEVICE_ID_DELORME_EM_LT20 0x0200 #define USB_VENDOR_ID_MCC 0x09db #define USB_DEVICE_ID_MCC_PMD1024LS 0x0076 @@ -1412,6 +1415,12 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_BTC 0x046e #define USB_DEVICE_ID_BTC_KEYBOARD 0x5303 +#define USB_VENDOR_ID_VERNIER 0x08f7 +#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001 +#define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002 +#define USB_DEVICE_ID_VERNIER_SKIP 0x0003 +#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 + /* * Alphabetically sorted blacklist by quirk type. @@ -1437,6 +1446,7 @@ static struct hid_blacklist { { USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_HIDCOM, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE }, @@ -1456,6 +1466,10 @@ static struct hid_blacklist { { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PENPARTNER, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 1, HID_QUIRK_IGNORE }, @@ -1481,6 +1495,10 @@ static struct hid_blacklist { { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE }, diff --git a/drivers/usb/media/pwc/ChangeLog b/drivers/usb/media/pwc/ChangeLog deleted file mode 100644 index b2eb71a9afb..00000000000 --- a/drivers/usb/media/pwc/ChangeLog +++ /dev/null @@ -1,143 +0,0 @@ -9.0.2 - -* Adding #ifdef to compile PWC before and after 2.6.5 - -9.0.1 - -9.0 - - -8.12 - -* Implement motorized pan/tilt feature for Logitech QuickCam Orbit/Spere. - -8.11.1 - -* Fix for PCVC720/40, would not be able to set videomode -* Fix for Samsung MPC models, appearantly they are based on a newer chipset - -8.11 - -* 20 dev_hints (per request) -* Hot unplugging should be better, no more dangling pointers or memory leaks -* Added reserved Logitech webcam IDs -* Device now remembers size & fps between close()/open() -* Removed palette stuff altogether - -8.10.1 - -* Added IDs for PCVC720K/40 and Creative Labs Webcam Pro - -8.10 - -* Fixed ID for QuickCam Notebook pro -* Added GREALSIZE ioctl() call -* Fixed bug in case PWCX was not loaded and invalid size was set - -8.9 - -* Merging with kernel 2.5.49 -* Adding IDs for QuickCam Zoom & QuickCam Notebook - -8.8 - -* Fixing 'leds' parameter -* Adding IDs for Logitech QuickCam Pro 4000 -* Making URB init/cleanup a little nicer - -8.7 - -* Incorporating changes in ioctl() parameter passing -* Also changes to URB mechanism - -8.6 - -* Added ID's for Visionite VCS UM100 and UC300 -* Removed YUV420-interlaced palette altogether (was confusing) -* Removed MIRROR stuff as it didn't work anyway -* Fixed a problem with the 'leds' parameter (wouldn't blink) -* Added ioctl()s for advanced features: 'extended' whitebalance ioctl()s, - CONTOUR, BACKLIGHT, FLICKER, DYNNOISE. -* VIDIOCGCAP.name now contains real camera model name instead of - 'Philips xxx webcam' -* Added PROBE ioctl (see previous point & API doc) - -8.5 - -* Adding IDs for Creative Labs Webcam 5 -* Adding IDs for SOTEC CMS-001 webcam -* Solving possible hang in VIDIOCSYNC when unplugging the cam -* Forgot to return structure in VIDIOCPWCGAWB, oops -* Time interval for the LEDs are now in milliseconds - -8.4 - -* Fixing power_save option for Vesta range -* Handling new error codes in ISOC callback -* Adding dev_hint module parameter, to specify /dev/videoX device nodes - -8.3 - -* Adding Samsung C10 and C30 cameras -* Removing palette module parameter -* Fixed typo in ID of QuickCam 3000 Pro -* Adding LED settings (blinking while in use) for ToUCam cameras. -* Turns LED off when camera is not in use. - -8.2 - -* Making module more silent when trace = 0 -* Adding QuickCam 3000 Pro IDs -* Chrominance control for the Vesta cameras -* Hopefully fixed problems on machines with BIGMEM and > 1GB of RAM -* Included Oliver Neukem's lock_kernel() patch -* Allocates less memory for image buffers -* Adds ioctl()s for the whitebalancing - -8.1 - -* Adding support for 750 -* Adding V4L GAUDIO/SAUDIO/UNIT ioctl() calls - -8.0 -* 'damage control' after inclusion in 2.4.5. -* Changed wait-queue mechanism in read/mmap/poll according to the book. -* Included YUV420P palette. -* Changed interface to decompressor module. -* Cleaned up pwc structure a bit. - -7.0 - -* Fixed bug in vcvt_420i_yuyv; extra variables on stack were misaligned. -* There is now a clear error message when an image size is selected that - is only supported using the decompressor, and the decompressor isn't - loaded. -* When the decompressor wasn't loaded, selecting large image size - would create skewed or double images. - -6.3 - -* Introduced spinlocks for the buffer pointer manipulation; a number of - reports seem to suggest the down()/up() semaphores were the cause of - lockups, since they are not suitable for interrupt/user locking. -* Separated decompressor and core code into 2 modules. - -6.2 - -* Non-integral image sizes are now padded with gray or black. -* Added SHUTTERSPEED ioctl(). -* Fixed buglet in VIDIOCPWCSAGC; the function would always return an error, - even though the call succeeded. -* Added hotplug support for 2.4.*. -* Memory: the 645/646 uses less memory now. - -6.1 - -* VIDIOCSPICT returns -EINVAL with invalid palettes. -* Added saturation control. -* Split decompressors from rest. -* Fixed bug that would reset the framerate to the default framerate if - the rate field was set to 0 (which is not what I intended, nl. do not - change the framerate!). -* VIDIOCPWCSCQUAL (setting compression quality) now takes effect immediately. -* Workaround for a bug in the 730 sensor. diff --git a/drivers/usb/media/pwc/Makefile b/drivers/usb/media/pwc/Makefile index e0b41ed4407..2d93a775011 100644 --- a/drivers/usb/media/pwc/Makefile +++ b/drivers/usb/media/pwc/Makefile @@ -1,6 +1,6 @@ ifneq ($(KERNELRELEASE),) -pwc-objs := pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o pwc-dec1.o pwc-dec23.o pwc-kiara.o pwc-timon.o +pwc-objs := pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o pwc-timon.o pwc-kiara.o obj-$(CONFIG_USB_PWC) += pwc.o diff --git a/drivers/usb/media/pwc/pwc-ctrl.c b/drivers/usb/media/pwc/pwc-ctrl.c index 42ec468d52d..53099190952 100644 --- a/drivers/usb/media/pwc/pwc-ctrl.c +++ b/drivers/usb/media/pwc/pwc-ctrl.c @@ -48,8 +48,6 @@ #include "pwc-uncompress.h" #include "pwc-kiara.h" #include "pwc-timon.h" -#include "pwc-dec1.h" -#include "pwc-dec23.h" /* Request types: video */ #define SET_LUM_CTL 0x01 @@ -246,7 +244,7 @@ static inline int set_video_mode_Nala(struct pwc_device *pdev, int size, int fra switch(pdev->type) { case 645: case 646: - pwc_dec1_init(pdev->type, pdev->release, buf, pdev->decompress_data); +/* pwc_dec1_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ break; case 675: @@ -256,7 +254,7 @@ static inline int set_video_mode_Nala(struct pwc_device *pdev, int size, int fra case 730: case 740: case 750: - pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); +/* pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ break; } } @@ -318,8 +316,8 @@ static inline int set_video_mode_Timon(struct pwc_device *pdev, int size, int fr if (ret < 0) return ret; - if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW) - pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); +/* if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW) + pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ pdev->cmd_len = 13; memcpy(pdev->cmd_buf, buf, 13); @@ -397,8 +395,8 @@ static inline int set_video_mode_Kiara(struct pwc_device *pdev, int size, int fr if (ret < 0) return ret; - if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW) - pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); +/* if (pChoose->bandlength > 0 && pdev->vpalette != VIDEO_PALETTE_RAW) + pwc_dec23_init(pdev->type, pdev->release, buf, pdev->decompress_data); */ pdev->cmd_len = 12; memcpy(pdev->cmd_buf, buf, 12); diff --git a/drivers/usb/media/pwc/pwc-dec1.c b/drivers/usb/media/pwc/pwc-dec1.c deleted file mode 100644 index 57d03d9178f..00000000000 --- a/drivers/usb/media/pwc/pwc-dec1.c +++ /dev/null @@ -1,42 +0,0 @@ -/* Linux driver for Philips webcam - Decompression for chipset version 1 - (C) 2004 Luc Saillard (luc@saillard.org) - - NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx - driver and thus may have bugs that are not present in the original version. - Please send bug reports and support requests to <luc@saillard.org>. - The decompression routines have been implemented by reverse-engineering the - Nemosoft binary pwcx module. Caveat emptor. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - - - -#include "pwc-dec1.h" - - -void pwc_dec1_init(int type, int release, void *buffer, void *table) -{ - -} - -void pwc_dec1_exit(void) -{ - - - -} - diff --git a/drivers/usb/media/pwc/pwc-dec1.h b/drivers/usb/media/pwc/pwc-dec1.h deleted file mode 100644 index a7ffd9c45a2..00000000000 --- a/drivers/usb/media/pwc/pwc-dec1.h +++ /dev/null @@ -1,36 +0,0 @@ -/* Linux driver for Philips webcam - (C) 2004 Luc Saillard (luc@saillard.org) - - NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx - driver and thus may have bugs that are not present in the original version. - Please send bug reports and support requests to <luc@saillard.org>. - The decompression routines have been implemented by reverse-engineering the - Nemosoft binary pwcx module. Caveat emptor. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - - - -#ifndef PWC_DEC1_H -#define PWC_DEC1_H - -void pwc_dec1_init(int type, int release, void *buffer, void *private_data); -void pwc_dec1_exit(void); - -#endif - - - diff --git a/drivers/usb/media/pwc/pwc-dec23.c b/drivers/usb/media/pwc/pwc-dec23.c deleted file mode 100644 index 98fa3f7a9ef..00000000000 --- a/drivers/usb/media/pwc/pwc-dec23.c +++ /dev/null @@ -1,623 +0,0 @@ -/* Linux driver for Philips webcam - Decompression for chipset version 2 et 3 - (C) 2004 Luc Saillard (luc@saillard.org) - - NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx - driver and thus may have bugs that are not present in the original version. - Please send bug reports and support requests to <luc@saillard.org>. - The decompression routines have been implemented by reverse-engineering the - Nemosoft binary pwcx module. Caveat emptor. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include "pwc-timon.h" -#include "pwc-kiara.h" -#include "pwc-dec23.h" -#include "pwc-ioctl.h" - -#include <linux/string.h> - -/**** - * - * - * - */ - - -static void fill_table_a000(unsigned int *p) -{ - static unsigned int initial_values[12] = { - 0xFFAD9B00, 0xFFDDEE00, 0x00221200, 0x00526500, - 0xFFC21E00, 0x003DE200, 0xFF924B80, 0xFFD2A300, - 0x002D5D00, 0x006DB480, 0xFFED3E00, 0x0012C200 - }; - static unsigned int values_derivated[12] = { - 0x0000A4CA, 0x00004424, 0xFFFFBBDC, 0xFFFF5B36, - 0x00007BC4, 0xFFFF843C, 0x0000DB69, 0x00005ABA, - 0xFFFFA546, 0xFFFF2497, 0x00002584, 0xFFFFDA7C - }; - unsigned int temp_values[12]; - int i,j; - - memcpy(temp_values,initial_values,sizeof(initial_values)); - for (i=0;i<256;i++) - { - for (j=0;j<12;j++) - { - *p++ = temp_values[j]; - temp_values[j] += values_derivated[j]; - } - } -} - -static void fill_table_d000(unsigned char *p) -{ - int bit,byte; - - for (bit=0; bit<8; bit++) - { - unsigned char bitpower = 1<<bit; - unsigned char mask = bitpower-1; - for (byte=0; byte<256; byte++) - { - if (byte & bitpower) - *p++ = -(byte & mask); - else - *p++ = (byte & mask); - } - } -} - -/* - * - * Kiara: 0 <= ver <= 7 - * Timon: 0 <= ver <= 15 - * - */ -static void fill_table_color(unsigned int version, const unsigned int *romtable, - unsigned char *p0004, - unsigned char *p8004) -{ - const unsigned int *table; - unsigned char *p0, *p8; - int i,j,k; - int dl,bit,pw; - - romtable += version*256; - - for (i=0; i<2; i++) - { - table = romtable + i*128; - - for (dl=0; dl<16; dl++) - { - p0 = p0004 + (i<<14) + (dl<<10); - p8 = p8004 + (i<<12) + (dl<<8); - - for (j=0; j<8; j++ , table++, p0+=128) - { - for (k=0; k<16; k++) - { - if (k==0) - bit=1; - else if (k>=1 && k<3) - bit=(table[0]>>15)&7; - else if (k>=3 && k<6) - bit=(table[0]>>12)&7; - else if (k>=6 && k<10) - bit=(table[0]>>9)&7; - else if (k>=10 && k<13) - bit=(table[0]>>6)&7; - else if (k>=13 && k<15) - bit=(table[0]>>3)&7; - else - bit=(table[0])&7; - if (k == 0) - *(unsigned char *)p8++ = 8; - else - *(unsigned char *)p8++ = j - bit; - *(unsigned char *)p8++ = bit; - - pw = 1<<bit; - p0[k+0x00] = (1*pw) + 0x80; - p0[k+0x10] = (2*pw) + 0x80; - p0[k+0x20] = (3*pw) + 0x80; - p0[k+0x30] = (4*pw) + 0x80; - p0[k+0x40] = (-pw) + 0x80; - p0[k+0x50] = (2*-pw) + 0x80; - p0[k+0x60] = (3*-pw) + 0x80; - p0[k+0x70] = (4*-pw) + 0x80; - } /* end of for (k=0; k<16; k++, p8++) */ - } /* end of for (j=0; j<8; j++ , table++) */ - } /* end of for (dl=0; dl<16; dl++) */ - } /* end of for (i=0; i<2; i++) */ -} - -/* - * precision = (pdev->xx + pdev->yy) - * - */ -static void fill_table_dc00_d800(unsigned int precision, unsigned int *pdc00, unsigned int *pd800) -{ - int i; - unsigned int offset1, offset2; - - for(i=0,offset1=0x4000, offset2=0; i<256 ; i++,offset1+=0x7BC4, offset2+=0x7BC4) - { - unsigned int msb = offset1 >> 15; - - if ( msb > 255) - { - if (msb) - msb=0; - else - msb=255; - } - - *pdc00++ = msb << precision; - *pd800++ = offset2; - } - -} - -/* - * struct { - * unsigned char op; // operation to execute - * unsigned char bits; // bits use to perform operation - * unsigned char offset1; // offset to add to access in the table_0004 % 16 - * unsigned char offset2; // offset to add to access in the table_0004 - * } - * - */ -static unsigned int table_ops[] = { -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x10, 0x00,0x06,0x01,0x30, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x01,0x20, 0x01,0x00,0x00,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x50, 0x00,0x05,0x02,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x03,0x00, 0x01,0x00,0x00,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x10, 0x00,0x06,0x02,0x10, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x01,0x60, 0x01,0x00,0x00,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x50, 0x00,0x05,0x02,0x40, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x03,0x40, 0x01,0x00,0x00,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x10, 0x00,0x06,0x01,0x70, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x01,0x20, 0x01,0x00,0x00,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x50, 0x00,0x05,0x02,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x03,0x00, 0x01,0x00,0x00,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x10, 0x00,0x06,0x02,0x50, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x01,0x60, 0x01,0x00,0x00,0x00, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x00, 0x00,0x04,0x01,0x50, 0x00,0x05,0x02,0x40, -0x02,0x00,0x00,0x00, 0x00,0x03,0x01,0x40, 0x00,0x05,0x03,0x40, 0x01,0x00,0x00,0x00 -}; - -/* - * TODO: multiply by 4 all values - * - */ -static unsigned int MulIdx[256] = { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 1, 2, 3, 0, 1, 2, 3, 0, 1, 2, 3, 0, 1, 2, 3, - 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, - 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5, 4, 4, 4, 4, - 6, 7, 8, 9, 7,10,11, 8, 8,11,10, 7, 9, 8, 7, 6, - 4, 5, 5, 4, 4, 5, 5, 4, 4, 5, 5, 4, 4, 5, 5, 4, - 1, 3, 0, 2, 1, 3, 0, 2, 1, 3, 0, 2, 1, 3, 0, 2, - 0, 3, 3, 0, 1, 2, 2, 1, 2, 1, 1, 2, 3, 0, 0, 3, - 0, 1, 2, 3, 3, 2, 1, 0, 3, 2, 1, 0, 0, 1, 2, 3, - 1, 1, 1, 1, 3, 3, 3, 3, 0, 0, 0, 0, 2, 2, 2, 2, - 7,10,11, 8, 9, 8, 7, 6, 6, 7, 8, 9, 8,11,10, 7, - 4, 5, 5, 4, 5, 4, 4, 5, 5, 4, 4, 5, 4, 5, 5, 4, - 7, 9, 6, 8,10, 8, 7,11,11, 7, 8,10, 8, 6, 9, 7, - 1, 3, 0, 2, 2, 0, 3, 1, 2, 0, 3, 1, 1, 3, 0, 2, - 1, 2, 2, 1, 3, 0, 0, 3, 0, 3, 3, 0, 2, 1, 1, 2, -10, 8, 7,11, 8, 6, 9, 7, 7, 9, 6, 8,11, 7, 8,10 -}; - - - -void pwc_dec23_init(int type, int release, unsigned char *mode, void *data) -{ - int flags; - struct pwc_dec23_private *pdev = data; - release = release; - - switch (type) - { - case 720: - case 730: - case 740: - case 750: - flags = mode[2]&0x18; /* our: flags = 8, mode[2]==e8 */ - if (flags==8) - pdev->zz = 7; - else if (flags==0x10) - pdev->zz = 8; - else - pdev->zz = 6; - flags = mode[2]>>5; /* our: 7 */ - - fill_table_color(flags, (unsigned int *)KiaraRomTable, pdev->table_0004, pdev->table_8004); - break; - - - case 675: - case 680: - case 690: - flags = mode[2]&6; - if (flags==2) - pdev->zz = 7; - else if (flags==4) - pdev->zz = 8; - else - pdev->zz = 6; - flags = mode[2]>>3; - - fill_table_color(flags, (unsigned int *)TimonRomTable, pdev->table_0004, pdev->table_8004); - break; - - default: - /* Not supported */ - return; - } - - /* * * * ** */ - pdev->xx = 8 - pdev->zz; - pdev->yy = 15 - pdev->xx; - pdev->zzmask = 0xFF>>pdev->xx; - //pdev->zzmask = (1U<<pdev->zz)-1; - - - fill_table_dc00_d800(pdev->xx + pdev->yy, pdev->table_dc00, pdev->table_d800); - fill_table_a000(pdev->table_a004); - fill_table_d000(pdev->table_d004); -} - - -/* - * To manage the stream, we keep in a 32 bits variables, - * the next bits in the stream. fill_reservoir() add to - * the reservoir at least wanted nbits. - * - * - */ -#define fill_nbits(reservoir,nbits_in_reservoir,stream,nbits_wanted) do { \ - while (nbits_in_reservoir<nbits_wanted) \ - { \ - reservoir |= (*(stream)++) << nbits_in_reservoir; \ - nbits_in_reservoir+=8; \ - } \ -} while(0); - -#define get_nbits(reservoir,nbits_in_reservoir,stream,nbits_wanted,result) do { \ - fill_nbits(reservoir,nbits_in_reservoir,stream,nbits_wanted); \ - result = (reservoir) & ((1U<<nbits_wanted)-1); \ - reservoir >>= nbits_wanted; \ - nbits_in_reservoir -= nbits_wanted; \ -} while(0); - - - -static void DecompressBand23(const struct pwc_dec23_private *pdev, - const unsigned char *rawyuv, - unsigned char *planar_y, - unsigned char *planar_u, - unsigned char *planar_v, - unsigned int image_x, /* aka number of pixels wanted ??? */ - unsigned int pixels_per_line, /* aka number of pixels per line */ - int flags) -{ - - - unsigned int reservoir, nbits_in_reservoir; - int first_4_bits; - unsigned int bytes_per_channel; - int line_size; /* size of the line (4Y+U+V) */ - int passes; - const unsigned char *ptable0004, *ptable8004; - - int even_line; - unsigned int temp_colors[16]; - int nblocks; - - const unsigned char *stream; - unsigned char *dest_y, *dest_u=NULL, *dest_v=NULL; - unsigned int offset_to_plane_u, offset_to_plane_v; - - int i; - - - reservoir = 0; - nbits_in_reservoir = 0; - stream = rawyuv+1; /* The first byte of the stream is skipped */ - even_line = 1; - - get_nbits(reservoir,nbits_in_reservoir,stream,4,first_4_bits); - - line_size = pixels_per_line*3; - - for (passes=0;passes<2;passes++) - { - if (passes==0) - { - bytes_per_channel = pixels_per_line; - dest_y = planar_y; - nblocks = image_x/4; - } - else - { - /* Format planar: All Y, then all U, then all V */ - bytes_per_channel = pixels_per_line/2; - dest_u = planar_u; - dest_v = planar_v; - dest_y = dest_u; - nblocks = image_x/8; - } - - offset_to_plane_u = bytes_per_channel*2; - offset_to_plane_v = bytes_per_channel*3; - /* - printf("bytes_per_channel = %d\n",bytes_per_channel); - printf("offset_to_plane_u = %d\n",offset_to_plane_u); - printf("offset_to_plane_v = %d\n",offset_to_plane_v); - */ - - while (nblocks-->0) - { - unsigned int gray_index; - - fill_nbits(reservoir,nbits_in_reservoir,stream,16); - gray_index = reservoir & pdev->zzmask; - reservoir >>= pdev->zz; - nbits_in_reservoir -= pdev->zz; - - fill_nbits(reservoir,nbits_in_reservoir,stream,2); - - if ( (reservoir & 3) == 0) - { - reservoir>>=2; - nbits_in_reservoir-=2; - for (i=0;i<16;i++) - temp_colors[i] = pdev->table_dc00[gray_index]; - - } - else - { - unsigned int channel_v, offset1; - - /* swap bit 0 and 2 of offset_OR */ - channel_v = ((reservoir & 1) << 2) | (reservoir & 2) | ((reservoir & 4)>>2); - reservoir>>=3; - nbits_in_reservoir-=3; - - for (i=0;i<16;i++) - temp_colors[i] = pdev->table_d800[gray_index]; - - ptable0004 = pdev->table_0004 + (passes*16384) + (first_4_bits*1024) + (channel_v*128); - ptable8004 = pdev->table_8004 + (passes*4096) + (first_4_bits*256) + (channel_v*32); - - offset1 = 0; - while(1) - { - unsigned int index_in_table_ops, op, rows=0; - fill_nbits(reservoir,nbits_in_reservoir,stream,16); - - /* mode is 0,1 or 2 */ - index_in_table_ops = (reservoir&0x3F); - op = table_ops[ index_in_table_ops*4 ]; - if (op == 2) - { - reservoir >>= 2; - nbits_in_reservoir -= 2; - break; /* exit the while(1) */ - } - if (op == 0) - { - unsigned int shift; - - offset1 = (offset1 + table_ops[index_in_table_ops*4+2]) & 0x0F; - shift = table_ops[ index_in_table_ops*4+1 ]; - reservoir >>= shift; - nbits_in_reservoir -= shift; - rows = ptable0004[ offset1 + table_ops[index_in_table_ops*4+3] ]; - } - if (op == 1) - { - /* 10bits [ xxxx xxxx yyyy 000 ] - * yyy => offset in the table8004 - * xxx => offset in the tabled004 - */ - unsigned int mask, shift; - unsigned int col1, row1, total_bits; - - offset1 = (offset1 + ((reservoir>>3)&0x0F)+1) & 0x0F; - - col1 = (reservoir>>7) & 0xFF; - row1 = ptable8004 [ offset1*2 ]; - - /* Bit mask table */ - mask = pdev->table_d004[ (row1<<8) + col1 ]; - shift = ptable8004 [ offset1*2 + 1]; - rows = ((mask << shift) + 0x80) & 0xFF; - - total_bits = row1 + 8; - reservoir >>= total_bits; - nbits_in_reservoir -= total_bits; - } - { - const unsigned int *table_a004 = pdev->table_a004 + rows*12; - unsigned int *poffset = MulIdx + offset1*16; /* 64/4 (int) */ - for (i=0;i<16;i++) - { - temp_colors[i] += table_a004[ *poffset ]; - poffset++; - } - } - } - } -#define USE_SIGNED_INT_FOR_COLOR -#ifdef USE_SIGNED_INT_FOR_COLOR -# define CLAMP(x) ((x)>255?255:((x)<0?0:x)) -#else -# define CLAMP(x) ((x)>255?255:x) -#endif - - if (passes == 0) - { -#ifdef USE_SIGNED_INT_FOR_COLOR - const int *c = temp_colors; -#else - const unsigned int *c = temp_colors; -#endif - unsigned char *d; - - d = dest_y; - for (i=0;i<4;i++,c++) - *d++ = CLAMP((*c) >> pdev->yy); - - d = dest_y + bytes_per_channel; - for (i=0;i<4;i++,c++) - *d++ = CLAMP((*c) >> pdev->yy); - - d = dest_y + offset_to_plane_u; - for (i=0;i<4;i++,c++) - *d++ = CLAMP((*c) >> pdev->yy); - - d = dest_y + offset_to_plane_v; - for (i=0;i<4;i++,c++) - *d++ = CLAMP((*c) >> pdev->yy); - - dest_y += 4; - } - else if (passes == 1) - { -#ifdef USE_SIGNED_INT_FOR_COLOR - int *c1 = temp_colors; - int *c2 = temp_colors+4; -#else - unsigned int *c1 = temp_colors; - unsigned int *c2 = temp_colors+4; -#endif - unsigned char *d; - - d = dest_y; - for (i=0;i<4;i++,c1++,c2++) - { - *d++ = CLAMP((*c1) >> pdev->yy); - *d++ = CLAMP((*c2) >> pdev->yy); - } - c1 = temp_colors+12; - //c2 = temp_colors+8; - d = dest_y + bytes_per_channel; - for (i=0;i<4;i++,c1++,c2++) - { - *d++ = CLAMP((*c1) >> pdev->yy); - *d++ = CLAMP((*c2) >> pdev->yy); - } - - if (even_line) /* Each line, swap u/v */ - { - even_line=0; - dest_y = dest_v; - dest_u += 8; - } - else - { - even_line=1; - dest_y = dest_u; - dest_v += 8; - } - } - - } /* end of while (nblocks-->0) */ - - } /* end of for (passes=0;passes<2;passes++) */ - -} - - -/** - * - * image: size of the image wanted - * view : size of the image returned by the camera - * offset: (x,y) to displayer image in the view - * - * src: raw data - * dst: image output - * flags: PWCX_FLAG_PLANAR - * pdev: private buffer - * bandlength: - * - */ -void pwc_dec23_decompress(const struct pwc_coord *image, - const struct pwc_coord *view, - const struct pwc_coord *offset, - const void *src, - void *dst, - int flags, - const void *data, - int bandlength) -{ - const struct pwc_dec23_private *pdev = data; - unsigned char *pout, *pout_planar_y=NULL, *pout_planar_u=NULL, *pout_planar_v=NULL; - int i,n,stride,pixel_size; - - - if (flags & PWCX_FLAG_BAYER) - { - pout = dst + (view->x * offset->y) + offset->x; - pixel_size = view->x * 4; - } - else - { - n = view->x * view->y; - - /* offset in Y plane */ - stride = view->x * offset->y; - pout_planar_y = dst + stride + offset->x; - - /* offsets in U/V planes */ - stride = (view->x * offset->y)/4 + offset->x/2; - pout_planar_u = dst + n + + stride; - pout_planar_v = dst + n + n/4 + stride; - - pixel_size = view->x * 4; - } - - - for (i=0;i<image->y;i+=4) - { - if (flags & PWCX_FLAG_BAYER) - { - //TODO: - //DecompressBandBayer(pdev,src,pout,image.x,view->x,flags); - src += bandlength; - pout += pixel_size; - } - else - { - DecompressBand23(pdev,src,pout_planar_y,pout_planar_u,pout_planar_v,image->x,view->x,flags); - src += bandlength; - pout_planar_y += pixel_size; - pout_planar_u += view->x; - pout_planar_v += view->x; - } - } -} - -void pwc_dec23_exit(void) -{ - /* Do nothing */ - -} - diff --git a/drivers/usb/media/pwc/pwc-dec23.h b/drivers/usb/media/pwc/pwc-dec23.h deleted file mode 100644 index 5b2aacdefa6..00000000000 --- a/drivers/usb/media/pwc/pwc-dec23.h +++ /dev/null @@ -1,58 +0,0 @@ -/* Linux driver for Philips webcam - (C) 2004 Luc Saillard (luc@saillard.org) - - NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx - driver and thus may have bugs that are not present in the original version. - Please send bug reports and support requests to <luc@saillard.org>. - The decompression routines have been implemented by reverse-engineering the - Nemosoft binary pwcx module. Caveat emptor. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#ifndef PWC_DEC23_H -#define PWC_DEC23_H - -struct pwc_dec23_private -{ - unsigned char xx,yy,zz,zzmask; - - unsigned char table_0004[2*0x4000]; - unsigned char table_8004[2*0x1000]; - unsigned int table_a004[256*12]; - - unsigned char table_d004[8*256]; - unsigned int table_d800[256]; - unsigned int table_dc00[256]; -}; - - -void pwc_dec23_init(int type, int release, unsigned char *buffer, void *private_data); -void pwc_dec23_exit(void); -void pwc_dec23_decompress(const struct pwc_coord *image, - const struct pwc_coord *view, - const struct pwc_coord *offset, - const void *src, - void *dst, - int flags, - const void *data, - int bandlength); - - - -#endif - - - diff --git a/drivers/usb/media/pwc/pwc-if.c b/drivers/usb/media/pwc/pwc-if.c index cca47f480a8..5429ff3b975 100644 --- a/drivers/usb/media/pwc/pwc-if.c +++ b/drivers/usb/media/pwc/pwc-if.c @@ -68,8 +68,6 @@ #include "pwc-ioctl.h" #include "pwc-kiara.h" #include "pwc-timon.h" -#include "pwc-dec23.h" -#include "pwc-dec1.h" #include "pwc-uncompress.h" /* Function prototypes and driver templates */ @@ -322,6 +320,7 @@ static int pwc_allocate_buffers(struct pwc_device *pdev) case 730: case 740: case 750: +#if 0 Trace(TRACE_MEMORY,"private_data(%zu)\n",sizeof(struct pwc_dec23_private)); kbuf = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL); /* Timon & Kiara */ break; @@ -330,6 +329,8 @@ static int pwc_allocate_buffers(struct pwc_device *pdev) /* TODO & FIXME */ kbuf = kmalloc(sizeof(struct pwc_dec23_private), GFP_KERNEL); break; +#endif + ; } if (kbuf == NULL) { Err("Failed to allocate decompress table.\n"); @@ -1131,11 +1132,11 @@ static int pwc_video_close(struct inode *inode, struct file *file) case 730: case 740: case 750: - pwc_dec23_exit(); /* Timon & Kiara */ +/* pwc_dec23_exit(); *//* Timon & Kiara */ break; case 645: case 646: - pwc_dec1_exit(); +/* pwc_dec1_exit(); */ break; } diff --git a/drivers/usb/media/pwc/pwc-kiara.c b/drivers/usb/media/pwc/pwc-kiara.c index 5485800efd8..c498c68bace 100644 --- a/drivers/usb/media/pwc/pwc-kiara.c +++ b/drivers/usb/media/pwc/pwc-kiara.c @@ -316,576 +316,3 @@ const struct Kiara_table_entry Kiara_table[PSZ_MAX][6][4] = }, }; - -/* - * Rom table for kiara chips - * - * 32 roms tables (one for each resolution ?) - * 2 tables per roms (one for each passes) (Y, and U&V) - * 128 bytes per passes - */ - -const unsigned int KiaraRomTable [8][2][16][8] = -{ - { /* version 0 */ - { /* version 0, passes 0 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000001,0x00000001}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000009,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000249,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000249,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x0000124a,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x0000124a,0x00009252,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00009252,0x00009292,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009292,0x00009292,0x00009493,0x000124db}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x0000a493,0x000124db,0x000124db,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x000124db,0x000126dc,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000124db,0x000136e4,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 0, passes 1 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000001,0x00000009, - 0x00000009,0x00000009,0x00000009,0x00000001}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000249,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00001252}, - {0x00000000,0x00000000,0x00000049,0x00001249, - 0x0000124a,0x0000124a,0x00001252,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009252,0x00009292,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009292,0x00009292,0x00009292,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00009292, - 0x00009492,0x00009493,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009252,0x00009493, - 0x000126dc,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000136e4,0x000136e4,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 1 */ - { /* version 1, passes 0 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000001}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00001252}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009252,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009252,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009292,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00009252, - 0x00009492,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x000124db,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000126dc,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 1, passes 1 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000009, - 0x00000049,0x00000009,0x00000001,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000000}, - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000249,0x00000049,0x0000024a,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x0000024a,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x0000024a,0x00000009}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009252,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009292,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009292,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009292,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x0000924a,0x0000924a, - 0x00009492,0x00009493,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 2 */ - { /* version 2, passes 0 */ - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x00009252,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009493,0x00009493,0x0000a49b}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009292,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009292,0x00009493,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x000124db,0x000124db,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x00009252,0x000124db, - 0x000126dc,0x0001b724,0x0001b725,0x0001b925}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 2, passes 1 */ - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00000249, - 0x0000124a,0x0000124a,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00009292,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x0000a49b,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00009252,0x0000a49b, - 0x0001249b,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 3 */ - { /* version 3, passes 0 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000136e4,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x0001b725,0x0001b925}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b92d,0x0001c92d}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000126dc,0x0001b724,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x000136e4,0x0001b925,0x00025bb6,0x00024b77}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 3, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00000249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x00009493,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x000126dc,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000136e4,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 4 */ - { /* version 4, passes 0 */ - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000249,0x00000249,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x00009252,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009292,0x00009493,0x00009493,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0001249b,0x000126dc,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00009252,0x00009493, - 0x000124db,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009252,0x0000a49b, - 0x000124db,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x000136e4,0x0001b925,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 4, passes 1 */ - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000009,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000049,0x00000049,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00000249,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x0000124a,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009252,0x0000124a,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x00009252,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x00009292,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009292,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009493,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000124db,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009252,0x000124db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 5 */ - { /* version 5, passes 0 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b725,0x000136e4}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x0001c96e,0x0001b925}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x0001b724,0x0001b925,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001c924,0x0002496d,0x00025bb6,0x00024b77}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 5, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009252,0x00009252,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000124db,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000124db,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000126dc,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 6 */ - { /* version 6, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b725,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x0001b724,0x0001b925,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x00024b76,0x0002496e}, - {0x00000000,0x00000000,0x00012492,0x000126db, - 0x0001c924,0x00024b6d,0x0002ddb6,0x00025bbf}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 6, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x00009252,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009292,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000124db,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000126dc,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 7 */ - { /* version 7, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x0000a49b, - 0x0001249b,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x0001b725,0x000124db}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b725,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000136e4,0x0001b724,0x0001b725,0x000126dc}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b724,0x0001c96e,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001c92d,0x0001c96e,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x000136e4,0x0001c92d,0x0001c96e,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001b925}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b724,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b924,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b924,0x0001c92d,0x00024b76,0x0002496e}, - {0x00000000,0x00000000,0x00012492,0x000136db, - 0x00024924,0x00024b6d,0x0002ddb6,0x00025bbf}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 7, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x00009492,0x00009292,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000124db,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000136db, - 0x0001b724,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000136db, - 0x0001b724,0x000126dc,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00009292,0x000136db, - 0x0001b724,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001b724,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00012492,0x0001b6db, - 0x0001c924,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - } -}; - diff --git a/drivers/usb/media/pwc/pwc-timon.c b/drivers/usb/media/pwc/pwc-timon.c index f950a4e5ed9..dee967173d6 100644 --- a/drivers/usb/media/pwc/pwc-timon.c +++ b/drivers/usb/media/pwc/pwc-timon.c @@ -314,1133 +314,3 @@ const struct Timon_table_entry Timon_table[PSZ_MAX][6][4] = }, }; -/* - * 16 versions: - * 2 tables (one for Y, and one for U&V) - * 16 levels of details per tables - * 8 blocs - */ - -const unsigned int TimonRomTable [16][2][16][8] = -{ - { /* version 0 */ - { /* version 0, passes 0 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000001}, - {0x00000000,0x00000000,0x00000001,0x00000001, - 0x00000001,0x00000001,0x00000001,0x00000001}, - {0x00000000,0x00000000,0x00000001,0x00000001, - 0x00000001,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000009,0x00000001, - 0x00000009,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000049,0x00000009}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000009,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000249,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000249,0x00000249,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000249,0x0000124a,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009252,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 0, passes 1 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000001,0x00000001, - 0x00000001,0x00000001,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000009,0x00000001, - 0x00000001,0x00000009,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000001,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000009, - 0x00000009,0x00000049,0x00000001,0x00000001}, - {0x00000000,0x00000000,0x00000049,0x00000009, - 0x00000009,0x00000049,0x00000001,0x00000001}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000009,0x00000001}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000009,0x00000001}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000009,0x00000001}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000249,0x00000049,0x00000009}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000249,0x00000049,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000249,0x00000249,0x00000049,0x00000009}, - {0x00000000,0x00000000,0x00001249,0x00000249, - 0x0000124a,0x0000124a,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 1 */ - { /* version 1, passes 0 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000001}, - {0x00000000,0x00000000,0x00000001,0x00000001, - 0x00000001,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000009,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000249,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00001252}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009252,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009252,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009292,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 1, passes 1 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000001,0x00000001,0x00000000}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000001,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000009,0x00000001,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000001,0x00000001}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000009,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000049,0x00000249,0x00000009,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000249,0x00000249,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x00000049,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00000049,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00000049,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009252,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 2 */ - { /* version 2, passes 0 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000001}, - {0x00000000,0x00000000,0x00000009,0x00000009, - 0x00000009,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00001252}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009252,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009252,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009292,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00009252, - 0x00009492,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x000124db,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000126dc,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 2, passes 1 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000009, - 0x00000049,0x00000009,0x00000001,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000000}, - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000249,0x00000049,0x0000024a,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x0000024a,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x0000024a,0x00000009}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009252,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009292,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009292,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009292,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x0000924a,0x0000924a, - 0x00009492,0x00009493,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 3 */ - { /* version 3, passes 0 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000001}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000049,0x00000249, - 0x00000249,0x00000249,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x00009252,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009292,0x00009292,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009292,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00009252, - 0x00009292,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009292,0x0000a49b,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x0000a49b,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x0001b725,0x000136e4}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 3, passes 1 */ - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000}, - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000001,0x00000000}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x00000049,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00000001}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x00001252,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009252,0x00009292,0x00000009}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009252,0x00009292,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009252,0x00009292,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009493,0x00009292,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009493,0x00009292,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009493,0x00009493,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009292,0x00009493,0x00009493,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x00009493,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009292, - 0x0000a493,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 4 */ - { /* version 4, passes 0 */ - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x00009252,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009493,0x00009493,0x0000a49b}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009292,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009292,0x00009493,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x000124db,0x000124db,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x00009252,0x000124db, - 0x000126dc,0x0001b724,0x0001b725,0x0001b925}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 4, passes 1 */ - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00000249, - 0x0000124a,0x0000124a,0x00001252,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00009292,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x0000a49b,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00009252,0x0000a49b, - 0x0001249b,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 5 */ - { /* version 5, passes 0 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x0000124a,0x00001252,0x00009292}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x0000124a,0x00009292,0x00009292,0x00009493}, - {0x00000000,0x00000000,0x00000249,0x0000924a, - 0x00009292,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009292,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x000124db,0x000124db,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0001249b,0x000126dc,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000126dc,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b724,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 5, passes 1 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x00009493,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x00009493,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x00009493,0x000124db,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x00009493,0x000124db,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x000124db,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x000124db,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009252,0x000124db, - 0x000126dc,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 6 */ - { /* version 6, passes 0 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x0000124a,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000136e4,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x0001b725,0x0001b925}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b92d,0x0001c92d}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000126dc,0x0001b724,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x000136e4,0x0001b925,0x00025bb6,0x00024b77}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 6, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00000249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x00009493,0x0000a49b,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x000126dc,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000136e4,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 7 */ - { /* version 7, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x0000a49b,0x000124db,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0001249b,0x000126dc,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x0001b725,0x0001b925}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000126dc,0x0001b724,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b724,0x0001c96e,0x0002496e}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x000136e4,0x0001b925,0x0001c96e,0x0002496e}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x0002496d,0x00025bb6,0x00025bbf}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 7, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x00009493,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x000136e4,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x000136e4,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000124db,0x000136e4,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x000136e4,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00012492,0x000126db, - 0x0001b724,0x0001b925,0x0001b725,0x000136e4}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 8 */ - { /* version 8, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009292,0x00009493,0x0000a49b,0x000124db}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x000124db,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000136e4}, - {0x00000000,0x00000000,0x00001249,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000136e4,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x0001b725,0x0001b925}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b92d,0x0001c92d}, - {0x00000000,0x00000000,0x00009252,0x000124db, - 0x000126dc,0x0001b724,0x0001b92d,0x0001c92d}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000126dc,0x0001b925,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x00024b76,0x00024b77}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x000136e4,0x0001b925,0x00024b76,0x00025bbf}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x000136e4,0x0001c92d,0x00024b76,0x00025bbf}, - {0x00000000,0x00000000,0x00012492,0x000136db, - 0x0001b724,0x00024b6d,0x0002ddb6,0x0002efff}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 8, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000126dc,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000136e4,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000136e4,0x0001b724,0x0001b725,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x000136e4,0x0001b925,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x000136e4,0x0001b925,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x0002496d,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 9 */ - { /* version 9, passes 0 */ - {0x00000000,0x00000000,0x00000049,0x00000049, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000249,0x00000249,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x0000124a,0x00009252,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009292,0x00009493,0x00009493,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0001249b,0x000126dc,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00009252,0x00009493, - 0x000124db,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009252,0x0000a49b, - 0x000124db,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x000136e4,0x0001b925,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 9, passes 1 */ - {0x00000000,0x00000000,0x00000249,0x00000049, - 0x00000009,0x00000009,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000049,0x00000049,0x00000009,0x00000009}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00000249,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x0000124a,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009252,0x0000124a,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x00009252,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x00009292,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009292,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009493,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000124db,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009252,0x000124db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 10 */ - { /* version 10, passes 0 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00000249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x00009493,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x000124db,0x000124db,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0001249b,0x000126dc,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000126dc,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009252,0x0000a49b, - 0x000124db,0x000136e4,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000126dc,0x0001b925,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x000136e4,0x0002496d,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 10, passes 1 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000049,0x00000049,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00000249,0x00000049,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x00009252,0x0000024a,0x00000049}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009493,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00009252, - 0x00009492,0x00009493,0x00001252,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x00009493,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x00009492,0x00009493,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009493,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009252,0x000126db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 11 */ - { /* version 11, passes 0 */ - {0x00000000,0x00000000,0x00000249,0x00000249, - 0x00000249,0x00000249,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009492,0x0000a49b,0x0000a49b,0x00009292}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x000124db,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b725,0x000136e4}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x0001c96e,0x0001b925}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x0001b724,0x0001b925,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001c924,0x0002496d,0x00025bb6,0x00024b77}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 11, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00000249, - 0x00000249,0x00000249,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009252,0x00009252,0x0000024a,0x0000024a}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x0000a49b,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x0000a49b,0x00009292,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000124db,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000124db,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000126dc,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 12 */ - { /* version 12, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x0000a493,0x0000a49b,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b725,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b724,0x0001b92d,0x0001b724}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x0001b724,0x0001b925,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x00024b76,0x0002496e}, - {0x00000000,0x00000000,0x00012492,0x000126db, - 0x0001c924,0x00024b6d,0x0002ddb6,0x00025bbf}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 12, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x00001249,0x00009292, - 0x00009492,0x00009252,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009292,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000124db,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000124db,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000126dc,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x000136e4,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00009492,0x000126db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 13 */ - { /* version 13, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x00009252,0x00009292,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x000124db,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x0000a49b, - 0x0001249b,0x000126dc,0x000126dc,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x000136e4,0x0001b725,0x000124db}, - {0x00000000,0x00000000,0x00009292,0x0000a49b, - 0x000136e4,0x0001b724,0x0001b725,0x000126dc}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000136e4,0x0001b724,0x0001b725,0x000126dc}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b724,0x0001c96e,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001c92d,0x0001c96e,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x000136e4,0x0001c92d,0x0001c96e,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001b925}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b724,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b924,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b924,0x0001c92d,0x00024b76,0x0002496e}, - {0x00000000,0x00000000,0x00012492,0x000136db, - 0x00024924,0x00024b6d,0x0002ddb6,0x00025bbf}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 13, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x00009492,0x00009292,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x0000a49b,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000124db,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000136db, - 0x0001b724,0x000124db,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000136db, - 0x0001b724,0x000126dc,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00009292,0x000136db, - 0x0001b724,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001b724,0x000126dc,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00012492,0x0001b6db, - 0x0001c924,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 14 */ - { /* version 14, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x0000924a, - 0x00009292,0x00009493,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00001249,0x0000a49b, - 0x0000a493,0x000124db,0x000126dc,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x0000a49b}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x000136e4,0x0001b725,0x000124db}, - {0x00000000,0x00000000,0x00009292,0x000124db, - 0x000126dc,0x0001b724,0x0001b92d,0x000126dc}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b724,0x0001b92d,0x000126dc}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001c92d,0x0001c96e,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x00024b76,0x0001b925}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b724,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b724,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x0001c92d,0x00024b76,0x0002496e}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b924,0x0002496d,0x00024b76,0x00024b77}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b924,0x00024b6d,0x0002ddb6,0x00025bbf}, - {0x00000000,0x00000000,0x00012492,0x0001b6db, - 0x00024924,0x0002db6d,0x00036db6,0x0002efff}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 14, passes 1 */ - {0x00000000,0x00000000,0x00001249,0x00001249, - 0x0000124a,0x0000124a,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x00009493, - 0x0000a493,0x00009292,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x0000a49b,0x00001252,0x00001252}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000136e4,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000136e4,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x000136e4,0x00009493,0x00009292}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001b724,0x000136e4,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001b724,0x000136e4,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001b724,0x000136e4,0x0000a49b,0x00009493}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001b724,0x000136e4,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000124db,0x0000a49b}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b724,0x000136e4,0x000126dc,0x000124db}, - {0x00000000,0x00000000,0x00012492,0x0001b6db, - 0x0001c924,0x0001b724,0x000136e4,0x000126dc}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - }, - { /* version 15 */ - { /* version 15, passes 0 */ - {0x00000000,0x00000000,0x00001249,0x00009493, - 0x0000a493,0x0000a49b,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0001249b,0x000126dc,0x000136e4,0x000124db}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x000126dc,0x0001b724,0x0001b725,0x000126dc}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x0001b724,0x0001b92d,0x000126dc}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x000136e4,0x0001b925,0x0001c96e,0x000136e4}, - {0x00000000,0x00000000,0x00009492,0x000124db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000124db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001b724}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b724,0x0001c92d,0x0001c96e,0x0001b925}, - {0x00000000,0x00000000,0x0000a492,0x000126db, - 0x0001b924,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b924,0x0001c92d,0x00024b76,0x0001c92d}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001b924,0x0002496d,0x00024b76,0x0002496e}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0002496d,0x00025bb6,0x00024b77}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x00024b6d,0x00025bb6,0x00024b77}, - {0x00000000,0x00000000,0x00012492,0x000136db, - 0x0001c924,0x00024b6d,0x0002ddb6,0x00025bbf}, - {0x00000000,0x00000000,0x00012492,0x0001b6db, - 0x00024924,0x0002db6d,0x00036db6,0x0002efff}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - }, - { /* version 15, passes 1 */ - {0x00000000,0x00000000,0x0000924a,0x0000924a, - 0x00009292,0x00009292,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x0000a49b, - 0x0000a493,0x000124db,0x00009292,0x00009292}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000124db,0x0001b724,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000126dc,0x0001b724,0x00009493,0x00009493}, - {0x00000000,0x00000000,0x0000924a,0x000124db, - 0x000136e4,0x0001b724,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00009292,0x000136db, - 0x0001b724,0x0001b724,0x0000a49b,0x0000a49b}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001c924,0x0001b724,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x00009492,0x000136db, - 0x0001c924,0x0001b724,0x000124db,0x000124db}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0001b724,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0001b925,0x000126dc,0x000126dc}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0001b925,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0001b925,0x000136e4,0x000136e4}, - {0x00000000,0x00000000,0x0000a492,0x000136db, - 0x0001c924,0x0001b925,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x00012492,0x000136db, - 0x0001c924,0x0001b925,0x0001b725,0x0001b724}, - {0x00000000,0x00000000,0x00012492,0x0001b6db, - 0x00024924,0x0002496d,0x0001b92d,0x0001b925}, - {0x00000000,0x00000000,0x00000000,0x00000000, - 0x00000000,0x00000000,0x00000000,0x00000000} - } - } -}; diff --git a/drivers/usb/media/pwc/pwc-uncompress.c b/drivers/usb/media/pwc/pwc-uncompress.c index c062e43b3ac..bc3b1635eab 100644 --- a/drivers/usb/media/pwc/pwc-uncompress.c +++ b/drivers/usb/media/pwc/pwc-uncompress.c @@ -29,8 +29,6 @@ #include "pwc.h" #include "pwc-uncompress.h" -#include "pwc-dec1.h" -#include "pwc-dec23.h" int pwc_decompress(struct pwc_device *pdev) { @@ -122,6 +120,7 @@ int pwc_decompress(struct pwc_device *pdev) switch (pdev->type) { +#if 0 case 675: case 680: case 690: @@ -137,6 +136,7 @@ int pwc_decompress(struct pwc_device *pdev) case 645: case 646: /* TODO & FIXME */ +#endif return -ENXIO; /* No such device or address: missing decompressor */ break; } diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig index db64c908d4a..b104430e2c6 100644 --- a/drivers/usb/net/Kconfig +++ b/drivers/usb/net/Kconfig @@ -219,17 +219,21 @@ config USB_EPSON2888 by some sample firmware from Epson. config USB_ZAURUS - boolean "Sharp Zaurus (stock ROMs)" + boolean "Sharp Zaurus (stock ROMs) and compatible" depends on USB_USBNET select CRC32 default y help Choose this option to support the usb networking links used by Zaurus models like the SL-5000D, SL-5500, SL-5600, A-300, B-500. - - If you install an alternate ROM image, you may no longer need - to support this protocol. Only the "eth-fd" driver really needs - this non-conformant variant of CDC Ethernet protocol. + This also supports some related device firmware, as used in some + PDAs from Olympus and some cell phones from Motorola. + + If you install an alternate ROM image, such as the Linux 2.6 based + versions of OpenZaurus, you should no longer need to support this + protocol. Only the "eth-fd" or "net_fd" drivers in these devices + really need this non-conformant variant of CDC Ethernet (or in + some cases CDC MDLM) protocol, not "g_ether". config USB_CDCETHER boolean "CDC Ethernet support (smart devices such as cable modems)" diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index f6bc6b3b333..4cbb408af72 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -1517,6 +1517,26 @@ static void cdc_unbind (struct usbnet *dev, struct usb_interface *intf) } } +#endif /* NEED_GENERIC_CDC */ + + +#ifdef CONFIG_USB_CDCETHER +#define HAVE_HARDWARE + +/*------------------------------------------------------------------------- + * + * Communications Device Class, Ethernet Control model + * + * Takes two interfaces. The DATA interface is inactive till an altsetting + * is selected. Configuration data includes class descriptors. + * + * This should interop with whatever the 2.4 "CDCEther.c" driver + * (by Brad Hards) talked with. + * + *-------------------------------------------------------------------------*/ + +#include <linux/ctype.h> + static void dumpspeed (struct usbnet *dev, __le32 *speeds) { @@ -1567,26 +1587,6 @@ static void cdc_status (struct usbnet *dev, struct urb *urb) } } -#endif /* NEED_GENERIC_CDC */ - - -#ifdef CONFIG_USB_CDCETHER -#define HAVE_HARDWARE - -/*------------------------------------------------------------------------- - * - * Communications Device Class, Ethernet Control model - * - * Takes two interfaces. The DATA interface is inactive till an altsetting - * is selected. Configuration data includes class descriptors. - * - * This should interop with whatever the 2.4 "CDCEther.c" driver - * (by Brad Hards) talked with. - * - *-------------------------------------------------------------------------*/ - -#include <linux/ctype.h> - static u8 nibble (unsigned char c) { if (likely (isdigit (c))) @@ -2765,7 +2765,7 @@ static int blan_mdlm_bind (struct usbnet *dev, struct usb_interface *intf) } /* expect bcdVersion 1.0, ignore */ if (memcmp(&desc->bGUID, blan_guid, 16) - || memcmp(&desc->bGUID, blan_guid, 16) ) { + && memcmp(&desc->bGUID, safe_guid, 16) ) { /* hey, this one might _really_ be MDLM! */ dev_dbg (&intf->dev, "MDLM guid\n"); goto bad_desc; @@ -2797,11 +2797,13 @@ static int blan_mdlm_bind (struct usbnet *dev, struct usb_interface *intf) * - bPad (ignored, for PADAFTER -- BLAN-only) * bits are: * - 0x01 -- Zaurus framing (add CRC) - * - 0x02 -- PADBEFORE - * - 0x04 -- PADAFTER + * - 0x02 -- PADBEFORE (CRC includes some padding) + * - 0x04 -- PADAFTER (some padding after CRC) * - 0x08 -- "fermat" packet mangling (for hw bugs) + * the PADBEFORE appears not to matter; we interop + * with devices that use it and those that don't. */ - if (detail->bDetailData[1] != 0x01) { + if ((detail->bDetailData[1] & ~02) != 0x01) { /* bmDataCapabilites == 0 would be fine too, * but framing is minidriver-coupled for now. */ @@ -4071,9 +4073,6 @@ static const struct usb_device_id products [] = { USB_DEVICE (0x8086, 0x07d3), // "blob" bootloader .driver_info = (unsigned long) &blob_info, }, { - USB_DEVICE (0x22b8, 0x600c), // USBNET Motorola E680 - .driver_info = (unsigned long) &linuxdev_info, -}, { // Linux Ethernet/RNDIS gadget on pxa210/25x/26x // e.g. Gumstix, current OpenZaurus, ... USB_DEVICE_VER (0x0525, 0xa4a2, 0x0203, 0x0203), diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index bc798edf035..9438909e87a 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -455,6 +455,17 @@ config USB_SERIAL_XIRCOM To compile this driver as a module, choose M here: the module will be called keyspan_pda. +config USB_SERIAL_OPTION + tristate "USB Option PCMCIA serial driver" + depends on USB_SERIAL && USB_OHCI_HCD && PCCARD + help + Say Y here if you want to use an Option card. This is a + GSM card, controlled by three serial ports which are connected + via an OHCI adapter located on a PC card. + + To compile this driver as a module, choose M here: the + module will be called option. + config USB_SERIAL_OMNINET tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)" depends on USB_SERIAL && EXPERIMENTAL diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index d56ff6d86cc..6c7cdcc99a9 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -32,6 +32,7 @@ obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o +obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 7e9bb63eb46..4ace9964fc6 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -7,6 +7,14 @@ * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. * + * Support to set flow control line levels using TIOCMGET and TIOCMSET + * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow + * control thanks to Munir Nassar nassarmu@real-time.com + * + * Outstanding Issues: + * Buffers are not flushed when the port is opened. + * Multiple calls to write() may fail with "Resource temporarily unavailable" + * */ #include <linux/config.h> @@ -24,7 +32,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.03" +#define DRIVER_VERSION "v0.04" #define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver" /* @@ -35,6 +43,9 @@ static void cp2101_cleanup(struct usb_serial_port*); static void cp2101_close(struct usb_serial_port*, struct file*); static void cp2101_get_termios(struct usb_serial_port*); static void cp2101_set_termios(struct usb_serial_port*, struct termios*); +static int cp2101_tiocmget (struct usb_serial_port *, struct file *); +static int cp2101_tiocmset (struct usb_serial_port *, struct file *, + unsigned int, unsigned int); static void cp2101_break_ctl(struct usb_serial_port*, int); static int cp2101_startup (struct usb_serial *); static void cp2101_shutdown(struct usb_serial*); @@ -43,9 +54,10 @@ static void cp2101_shutdown(struct usb_serial*); static int debug; static struct usb_device_id id_table [] = { - {USB_DEVICE(0x10c4, 0xea60) }, /*Silicon labs factory default*/ - {USB_DEVICE(0x10ab, 0x10c5) }, /*Siemens MC60 Cable*/ - { } /* Terminating Entry*/ + { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ + { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ + { } /* Terminating Entry */ }; MODULE_DEVICE_TABLE (usb, id_table); @@ -70,32 +82,35 @@ static struct usb_serial_device_type cp2101_device = { .close = cp2101_close, .break_ctl = cp2101_break_ctl, .set_termios = cp2101_set_termios, + .tiocmget = cp2101_tiocmget, + .tiocmset = cp2101_tiocmset, .attach = cp2101_startup, .shutdown = cp2101_shutdown, }; -/*Config request types*/ +/* Config request types */ #define REQTYPE_HOST_TO_DEVICE 0x41 #define REQTYPE_DEVICE_TO_HOST 0xc1 -/*Config SET requests. To GET, add 1 to the request number*/ -#define CP2101_UART 0x00 /*Enable / Disable*/ -#define CP2101_BAUDRATE 0x01 /*(BAUD_RATE_GEN_FREQ / baudrate)*/ -#define CP2101_BITS 0x03 /*0x(0)(data bits)(parity)(stop bits)*/ -#define CP2101_BREAK 0x05 /*On / Off*/ -#define CP2101_DTRRTS 0x07 /*101 / 202 ???*/ -#define CP2101_CONFIG_16 0x13 /*16 bytes of config data ???*/ -#define CP2101_CONFIG_6 0x19 /*6 bytes of config data ???*/ +/* Config SET requests. To GET, add 1 to the request number */ +#define CP2101_UART 0x00 /* Enable / Disable */ +#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */ +#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */ +#define CP2101_BREAK 0x05 /* On / Off */ +#define CP2101_CONTROL 0x07 /* Flow control line states */ +#define CP2101_MODEMCTL 0x13 /* Modem controls */ +#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */ -/*CP2101_UART*/ +/* CP2101_UART */ #define UART_ENABLE 0x0001 #define UART_DISABLE 0x0000 -/*CP2101_BAUDRATE*/ +/* CP2101_BAUDRATE */ #define BAUD_RATE_GEN_FREQ 0x384000 -/*CP2101_BITS*/ +/* CP2101_BITS */ #define BITS_DATA_MASK 0X0f00 +#define BITS_DATA_5 0X0500 #define BITS_DATA_6 0X0600 #define BITS_DATA_7 0X0700 #define BITS_DATA_8 0X0800 @@ -112,64 +127,137 @@ static struct usb_serial_device_type cp2101_device = { #define BITS_STOP_1 0x0000 #define BITS_STOP_1_5 0x0001 #define BITS_STOP_2 0x0002 + +/* CP2101_BREAK */ #define BREAK_ON 0x0000 #define BREAK_OFF 0x0001 +/* CP2101_CONTROL */ +#define CONTROL_DTR 0x0001 +#define CONTROL_RTS 0x0002 +#define CONTROL_CTS 0x0010 +#define CONTROL_DSR 0x0020 +#define CONTROL_RING 0x0040 +#define CONTROL_DCD 0x0080 +#define CONTROL_WRITE_DTR 0x0100 +#define CONTROL_WRITE_RTS 0x0200 -static int cp2101_get_config(struct usb_serial_port* port, u8 request) +/* + * cp2101_get_config + * Reads from the CP2101 configuration registers + * 'size' is specified in bytes. + * 'data' is a pointer to a pre-allocated array of integers large + * enough to hold 'size' bytes (with 4 bytes to each integer) + */ +static int cp2101_get_config(struct usb_serial_port* port, u8 request, + unsigned int *data, int size) { struct usb_serial *serial = port->serial; - unsigned char buf[4]; - unsigned int value; - int result, i; + u32 *buf; + int result, i, length; + + /* Number of integers required to contain the array */ + length = (((size - 1) | 3) + 1)/4; + + buf = kmalloc (length * sizeof(u32), GFP_KERNEL); + memset(buf, 0, length * sizeof(u32)); + + if (!buf) { + dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__); + return -ENOMEM; + } - /*For get requests, the request number must be incremented*/ + /* For get requests, the request number must be incremented */ request++; - /*Issue the request, attempting to read 4 bytes*/ + /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg (serial->dev,usb_rcvctrlpipe (serial->dev, 0), request, REQTYPE_DEVICE_TO_HOST, 0x0000, - 0, buf, 4, 300); + 0, buf, size, 300); - if (result < 0) { - dev_err(&port->dev, "%s - Unable to send config request, " - "request=0x%x result=%d\n", - __FUNCTION__, request, result); - return result; - } + /* Convert data into an array of integers */ + for (i=0; i<length; i++) + data[i] = le32_to_cpu(buf[i]); - /*Assemble each byte read into an integer value*/ - value = 0; - for (i=0; i<4 && i<result; i++) - value |= (buf[i] << (i * 8)); + kfree(buf); - dbg( " %s - request=0x%x result=%d value=0x%x", - __FUNCTION__, request, result, value); + if (result != size) { + dev_err(&port->dev, "%s - Unable to send config request, " + "request=0x%x size=%d result=%d\n", + __FUNCTION__, request, size, result); + return -EPROTO; + } - return value; + return 0; } -static int cp2101_set_config(struct usb_serial_port* port, u8 request, u16 value) +/* + * cp2101_set_config + * Writes to the CP2101 configuration registers + * Values less than 16 bits wide are sent directly + * 'size' is specified in bytes. + */ +static int cp2101_set_config(struct usb_serial_port* port, u8 request, + unsigned int *data, int size) { struct usb_serial *serial = port->serial; - int result; - result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), - request, REQTYPE_HOST_TO_DEVICE, value, - 0, NULL, 0, 300); + u32 *buf; + int result, i, length; - if (result <0) { - dev_err(&port->dev, "%s - Unable to send config request, " - "request=0x%x value=0x%x result=%d\n", - __FUNCTION__, request, value, result); - return result; + /* Number of integers required to contain the array */ + length = (((size - 1) | 3) + 1)/4; + + buf = kmalloc(length * sizeof(u32), GFP_KERNEL); + if (!buf) { + dev_err(&port->dev, "%s - out of memory.\n", + __FUNCTION__); + return -ENOMEM; + } + + /* Array of integers into bytes */ + for (i = 0; i < length; i++) + buf[i] = cpu_to_le32(data[i]); + + if (size > 2) { + result = usb_control_msg (serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_DEVICE, 0x0000, + 0, buf, size, 300); + } else { + result = usb_control_msg (serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_DEVICE, data[0], + 0, NULL, 0, 300); } - dbg(" %s - request=0x%x value=0x%x result=%d", - __FUNCTION__, request, value, result); + kfree(buf); + + if ((size > 2 && result != size) || result < 0) { + dev_err(&port->dev, "%s - Unable to send request, " + "request=0x%x size=%d result=%d\n", + __FUNCTION__, request, size, result); + return -EPROTO; + } + /* Single data value */ + result = usb_control_msg (serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_DEVICE, data[0], + 0, NULL, 0, 300); return 0; } +/* + * cp2101_set_config_single + * Convenience function for calling cp2101_set_config on single data values + * without requiring an integer pointer + */ +static inline int cp2101_set_config_single(struct usb_serial_port* port, + u8 request, unsigned int data) +{ + return cp2101_set_config(port, request, &data, 2); +} + static int cp2101_open (struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; @@ -177,7 +265,7 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp) dbg("%s - port %d", __FUNCTION__, port->number); - if (cp2101_set_config(port, CP2101_UART, UART_ENABLE)) { + if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) { dev_err(&port->dev, "%s - Unable to enable UART\n", __FUNCTION__); return -EPROTO; @@ -198,9 +286,12 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp) return result; } - /*Configure the termios structure*/ + /* Configure the termios structure */ cp2101_get_termios(port); + /* Set the DTR and RTS pins low */ + cp2101_tiocmset(port, NULL, TIOCM_DTR | TIOCM_RTS, 0); + return 0; } @@ -228,16 +319,18 @@ static void cp2101_close (struct usb_serial_port *port, struct file * filp) usb_kill_urb(port->write_urb); usb_kill_urb(port->read_urb); - cp2101_set_config(port, CP2101_UART, UART_DISABLE); + cp2101_set_config_single(port, CP2101_UART, UART_DISABLE); } -/* cp2101_get_termios*/ -/* Reads the baud rate, data bits, parity and stop bits from the device*/ -/* Corrects any unsupported values*/ -/* Configures the termios structure to reflect the state of the device*/ +/* + * cp2101_get_termios + * Reads the baud rate, data bits, parity, stop bits and flow control mode + * from the device, corrects any unsupported values, and configures the + * termios structure to reflect the state of the device + */ static void cp2101_get_termios (struct usb_serial_port *port) { - unsigned int cflag; + unsigned int cflag, modem_ctl[4]; int baud; int bits; @@ -249,15 +342,16 @@ static void cp2101_get_termios (struct usb_serial_port *port) } cflag = port->tty->termios->c_cflag; - baud = cp2101_get_config(port, CP2101_BAUDRATE); - /*Convert to baudrate*/ + cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2); + /* Convert to baudrate */ if (baud) baud = BAUD_RATE_GEN_FREQ / baud; dbg("%s - baud rate = %d", __FUNCTION__, baud); cflag &= ~CBAUD; switch (baud) { - /* The baud rates which are commented out below + /* + * The baud rates which are commented out below * appear to be supported by the device * but are non-standard */ @@ -284,14 +378,18 @@ static void cp2101_get_termios (struct usb_serial_port *port) dbg("%s - Baud rate is not supported, " "using 9600 baud", __FUNCTION__); cflag |= B9600; - cp2101_set_config(port, CP2101_BAUDRATE, + cp2101_set_config_single(port, CP2101_BAUDRATE, (BAUD_RATE_GEN_FREQ/9600)); break; } - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); cflag &= ~CSIZE; switch(bits & BITS_DATA_MASK) { + case BITS_DATA_5: + dbg("%s - data bits = 5", __FUNCTION__); + cflag |= CS5; + break; case BITS_DATA_6: dbg("%s - data bits = 6", __FUNCTION__); cflag |= CS6; @@ -310,7 +408,7 @@ static void cp2101_get_termios (struct usb_serial_port *port) cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; default: dbg("%s - Unknown number of data bits, " @@ -318,7 +416,7 @@ static void cp2101_get_termios (struct usb_serial_port *port) cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; } @@ -341,21 +439,21 @@ static void cp2101_get_termios (struct usb_serial_port *port) "disabling parity)", __FUNCTION__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; case BITS_PARITY_SPACE: dbg("%s - parity = SPACE (not supported, " "disabling parity)", __FUNCTION__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; default: dbg("%s - Unknown parity mode, " "disabling parity", __FUNCTION__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; } @@ -366,9 +464,9 @@ static void cp2101_get_termios (struct usb_serial_port *port) break; case BITS_STOP_1_5: dbg("%s - stop bits = 1.5 (not supported, " - "using 1 stop bit", __FUNCTION__); + "using 1 stop bit)", __FUNCTION__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; case BITS_STOP_2: dbg("%s - stop bits = 2", __FUNCTION__); @@ -378,10 +476,19 @@ static void cp2101_get_termios (struct usb_serial_port *port) dbg("%s - Unknown number of stop bits, " "using 1 stop bit", __FUNCTION__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, bits); + cp2101_set_config(port, CP2101_BITS, &bits, 2); break; } + cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + if (modem_ctl[0] & 0x0008) { + dbg("%s - flow control = CRTSCTS", __FUNCTION__); + cflag |= CRTSCTS; + } else { + dbg("%s - flow control = NONE", __FUNCTION__); + cflag &= ~CRTSCTS; + } + port->tty->termios->c_cflag = cflag; } @@ -389,8 +496,8 @@ static void cp2101_set_termios (struct usb_serial_port *port, struct termios *old_termios) { unsigned int cflag, old_cflag=0; - int baud=0; - int bits; + int baud=0, bits; + unsigned int modem_ctl[4]; dbg("%s - port %d", __FUNCTION__, port->number); @@ -400,7 +507,7 @@ static void cp2101_set_termios (struct usb_serial_port *port, } cflag = port->tty->termios->c_cflag; - /* check that they really want us to change something */ + /* Check that they really want us to change something */ if (old_termios) { if ((cflag == old_termios->c_cflag) && (RELEVANT_IFLAG(port->tty->termios->c_iflag) @@ -415,7 +522,8 @@ static void cp2101_set_termios (struct usb_serial_port *port, /* If the baud rate is to be updated*/ if ((cflag & CBAUD) != (old_cflag & CBAUD)) { switch (cflag & CBAUD) { - /* The baud rates which are commented out below + /* + * The baud rates which are commented out below * appear to be supported by the device * but are non-standard */ @@ -448,18 +556,22 @@ static void cp2101_set_termios (struct usb_serial_port *port, if (baud) { dbg("%s - Setting baud rate to %d baud", __FUNCTION__, baud); - if (cp2101_set_config(port, CP2101_BAUDRATE, + if (cp2101_set_config_single(port, CP2101_BAUDRATE, (BAUD_RATE_GEN_FREQ / baud))) dev_err(&port->dev, "Baud rate requested not " "supported by device\n"); } } - /*If the number of data bits is to be updated*/ + /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); bits &= ~BITS_DATA_MASK; switch (cflag & CSIZE) { + case CS5: + bits |= BITS_DATA_5; + dbg("%s - data bits = 5", __FUNCTION__); + break; case CS6: bits |= BITS_DATA_6; dbg("%s - data bits = 6", __FUNCTION__); @@ -483,13 +595,13 @@ static void cp2101_set_termios (struct usb_serial_port *port, bits |= BITS_DATA_8; break; } - if (cp2101_set_config(port, CP2101_BITS, bits)) + if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) dev_err(&port->dev, "Number of data bits requested " "not supported by device\n"); } if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) { - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); bits &= ~BITS_PARITY_MASK; if (cflag & PARENB) { if (cflag & PARODD) { @@ -500,13 +612,13 @@ static void cp2101_set_termios (struct usb_serial_port *port, dbg("%s - parity = EVEN", __FUNCTION__); } } - if (cp2101_set_config(port, CP2101_BITS, bits)) + if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) dev_err(&port->dev, "Parity mode not supported " "by device\n"); } if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { - bits = cp2101_get_config(port, CP2101_BITS); + cp2101_get_config(port, CP2101_BITS, &bits, 2); bits &= ~BITS_STOP_MASK; if (cflag & CSTOPB) { bits |= BITS_STOP_2; @@ -515,15 +627,90 @@ static void cp2101_set_termios (struct usb_serial_port *port, bits |= BITS_STOP_1; dbg("%s - stop bits = 1", __FUNCTION__); } - if (cp2101_set_config(port, CP2101_BITS, bits)) + if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) dev_err(&port->dev, "Number of stop bits requested " "not supported by device\n"); } + + if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { + cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", + __FUNCTION__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); + + if (cflag & CRTSCTS) { + modem_ctl[0] &= ~0x7B; + modem_ctl[0] |= 0x09; + modem_ctl[1] = 0x80; + dbg("%s - flow control = CRTSCTS", __FUNCTION__); + } else { + modem_ctl[0] &= ~0x7B; + modem_ctl[0] |= 0x01; + modem_ctl[1] |= 0x40; + dbg("%s - flow control = NONE", __FUNCTION__); + } + + dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", + __FUNCTION__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); + cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16); + } + +} + +static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear) +{ + int control = 0; + + dbg("%s - port %d", __FUNCTION__, port->number); + + if (set & TIOCM_RTS) { + control |= CONTROL_RTS; + control |= CONTROL_WRITE_RTS; + } + if (set & TIOCM_DTR) { + control |= CONTROL_DTR; + control |= CONTROL_WRITE_DTR; + } + if (clear & TIOCM_RTS) { + control &= ~CONTROL_RTS; + control |= CONTROL_WRITE_RTS; + } + if (clear & TIOCM_DTR) { + control &= ~CONTROL_DTR; + control |= CONTROL_WRITE_DTR; + } + + dbg("%s - control = 0x%.4x", __FUNCTION__, control); + + return cp2101_set_config(port, CP2101_CONTROL, &control, 2); + +} + +static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file) +{ + int control, result; + + dbg("%s - port %d", __FUNCTION__, port->number); + + cp2101_get_config(port, CP2101_CONTROL, &control, 1); + + result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) + |((control & CONTROL_RTS) ? TIOCM_RTS : 0) + |((control & CONTROL_CTS) ? TIOCM_CTS : 0) + |((control & CONTROL_DSR) ? TIOCM_DSR : 0) + |((control & CONTROL_RING)? TIOCM_RI : 0) + |((control & CONTROL_DCD) ? TIOCM_CD : 0); + + dbg("%s - control = 0x%.2x", __FUNCTION__, control); + + return result; } static void cp2101_break_ctl (struct usb_serial_port *port, int break_state) { - u16 state; + int state; dbg("%s - port %d", __FUNCTION__, port->number); if (break_state == 0) @@ -532,12 +719,12 @@ static void cp2101_break_ctl (struct usb_serial_port *port, int break_state) state = BREAK_ON; dbg("%s - turning break %s", __FUNCTION__, state==BREAK_OFF ? "off" : "on"); - cp2101_set_config(port, CP2101_BREAK, state); + cp2101_set_config(port, CP2101_BREAK, &state, 2); } static int cp2101_startup (struct usb_serial *serial) { - /*CP2101 buffers behave strangely unless device is reset*/ + /* CP2101 buffers behave strangely unless device is reset */ usb_reset_device(serial->dev); return 0; } @@ -548,7 +735,7 @@ static void cp2101_shutdown (struct usb_serial *serial) dbg("%s", __FUNCTION__); - /* stop reads and writes on all ports */ + /* Stop reads and writes on all ports */ for (i=0; i < serial->num_ports; ++i) { cp2101_cleanup(serial->port[i]); } @@ -560,16 +747,16 @@ static int __init cp2101_init (void) retval = usb_serial_register(&cp2101_device); if (retval) - return retval; /*Failed to register*/ + return retval; /* Failed to register */ retval = usb_register(&cp2101_driver); if (retval) { - /*Failed to register*/ + /* Failed to register */ usb_serial_deregister(&cp2101_device); return retval; } - /*Success*/ + /* Success */ info(DRIVER_DESC " " DRIVER_VERSION); return 0; } diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index f34a9bb6a21..012e63e0580 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -89,6 +89,7 @@ static int interval; static struct usb_device_id id_table_earthmate [] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, + { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { } /* Terminating entry */ }; @@ -99,6 +100,7 @@ static struct usb_device_id id_table_cyphidcomrs232 [] = { static struct usb_device_id id_table_combined [] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, + { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index 1012ee6b19c..1fa119efe41 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -13,6 +13,7 @@ /* DeLorme Earthmate USB - a GPS device */ #define VENDOR_ID_DELORME 0x1163 #define PRODUCT_ID_EARTHMATEUSB 0x0100 +#define PRODUCT_ID_EARTHMATEUSB_LT20 0x0200 /* Cypress HID->COM RS232 Adapter */ #define VENDOR_ID_CYPRESS 0x04b4 diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 52394f08a94..051c3a77b41 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -364,6 +364,7 @@ static struct usb_device_id id_table_8U232AM [] = { { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0, 0x3ff) }, { USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0, 0x3ff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0, 0x3ff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0, 0x3ff) }, { USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0, 0x3ff) }, { USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0, 0x3ff) }, { USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0, 0x3ff) }, @@ -475,6 +476,7 @@ static struct usb_device_id id_table_FT232BM [] = { { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0x400, 0xffff) }, + { USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) }, @@ -618,6 +620,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) }, { USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) }, { USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index a52bb13a9ce..8866376823a 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -144,6 +144,8 @@ /* ELV USB Module UO100 (PID sent by Stefan Frings) */ #define FTDI_ELV_UO100_PID 0xFB58 /* Product Id */ +/* ELV USB Module UM100 (PID sent by Arnim Laeuger) */ +#define FTDI_ELV_UM100_PID 0xFB5A /* Product Id */ /* * Definitions for ID TECH (www.idt-net.com) devices diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c new file mode 100644 index 00000000000..b722175f108 --- /dev/null +++ b/drivers/usb/serial/option.c @@ -0,0 +1,729 @@ +/* + Option Card (PCMCIA to) USB to Serial Driver + + Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de> + + This driver is free software; you can redistribute it and/or modify + it under the terms of Version 2 of the GNU General Public License as + published by the Free Software Foundation. + + Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org> + + History: + + 2005-05-19 v0.1 Initial version, based on incomplete docs + and analysis of misbehavior of the standard driver + 2005-05-20 v0.2 Extended the input buffer to avoid losing + random 64-byte chunks of data + 2005-05-21 v0.3 implemented chars_in_buffer() + turned on low_latency + simplified the code somewhat +*/ +#define DRIVER_VERSION "v0.3" +#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>" +#define DRIVER_DESC "Option Card (PC-Card to) USB to Serial Driver" + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/jiffies.h> +#include <linux/errno.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/usb.h> +#include "usb-serial.h" + +/* Function prototypes */ +static int option_open (struct usb_serial_port *port, struct file *filp); +static void option_close (struct usb_serial_port *port, struct file *filp); +static int option_startup (struct usb_serial *serial); +static void option_shutdown (struct usb_serial *serial); +static void option_rx_throttle (struct usb_serial_port *port); +static void option_rx_unthrottle (struct usb_serial_port *port); +static int option_write_room (struct usb_serial_port *port); + +static void option_instat_callback(struct urb *urb, struct pt_regs *regs); + + +static int option_write (struct usb_serial_port *port, + const unsigned char *buf, int count); + +static int option_chars_in_buffer (struct usb_serial_port *port); +static int option_ioctl (struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg); +static void option_set_termios (struct usb_serial_port *port, + struct termios *old); +static void option_break_ctl (struct usb_serial_port *port, int break_state); +static int option_tiocmget (struct usb_serial_port *port, struct file *file); +static int option_tiocmset (struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear); +static int option_send_setup (struct usb_serial_port *port); + +/* Vendor and product IDs */ +#define OPTION_VENDOR_ID 0x0AF0 + +#define OPTION_PRODUCT_OLD 0x5000 +#define OPTION_PRODUCT_WLAN 0x6000 + +static struct usb_device_id option_ids[] = { + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_WLAN) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, option_ids); + +static struct usb_driver option_driver = { + .owner = THIS_MODULE, + .name = "option", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = option_ids, +}; + +/* The card has three separate interfaces, wich the serial driver + * recognizes separately, thus num_port=1. + */ +static struct usb_serial_device_type option_3port_device = { + .owner = THIS_MODULE, + .name = "Option 3-port card", + .short_name = "option", + .id_table = option_ids, + .num_interrupt_in = NUM_DONT_CARE, + .num_bulk_in = NUM_DONT_CARE, + .num_bulk_out = NUM_DONT_CARE, + .num_ports = 1, /* 3 */ + .open = option_open, + .close = option_close, + .write = option_write, + .write_room = option_write_room, + .chars_in_buffer = option_chars_in_buffer, + .throttle = option_rx_throttle, + .unthrottle = option_rx_unthrottle, + .ioctl = option_ioctl, + .set_termios = option_set_termios, + .break_ctl = option_break_ctl, + .tiocmget = option_tiocmget, + .tiocmset = option_tiocmset, + .attach = option_startup, + .shutdown = option_shutdown, + .read_int_callback = option_instat_callback, +}; + +static int debug; + +/* per port private data */ + +#define N_IN_URB 4 +#define N_OUT_URB 1 +#define IN_BUFLEN 1024 +#define OUT_BUFLEN 1024 + +struct option_port_private { + /* Input endpoints and buffer for this port */ + struct urb *in_urbs[N_IN_URB]; + char in_buffer[N_IN_URB][IN_BUFLEN]; + /* Output endpoints and buffer for this port */ + struct urb *out_urbs[N_OUT_URB]; + char out_buffer[N_OUT_URB][OUT_BUFLEN]; + + /* Settings for the port */ + int rts_state; /* Handshaking pins (outputs) */ + int dtr_state; + int cts_state; /* Handshaking pins (inputs) */ + int dsr_state; + int dcd_state; + int ri_state; + // int break_on; + + unsigned long tx_start_time[N_OUT_URB]; +}; + + +/* Functions used by new usb-serial code. */ +static int __init +option_init (void) +{ + int retval; + retval = usb_serial_register(&option_3port_device); + if (retval) + goto failed_3port_device_register; + retval = usb_register(&option_driver); + if (retval) + goto failed_driver_register; + + info(DRIVER_DESC ": " DRIVER_VERSION); + + return 0; + +failed_driver_register: + usb_serial_deregister (&option_3port_device); +failed_3port_device_register: + return retval; +} + +static void __exit +option_exit (void) +{ + usb_deregister (&option_driver); + usb_serial_deregister (&option_3port_device); +} + +module_init(option_init); +module_exit(option_exit); + +static void +option_rx_throttle (struct usb_serial_port *port) +{ + dbg("%s", __FUNCTION__); +} + + +static void +option_rx_unthrottle (struct usb_serial_port *port) +{ + dbg("%s", __FUNCTION__); +} + + +static void +option_break_ctl (struct usb_serial_port *port, int break_state) +{ + /* Unfortunately, I don't know how to send a break */ + dbg("%s", __FUNCTION__); +} + + +static void +option_set_termios (struct usb_serial_port *port, + struct termios *old_termios) +{ + dbg("%s", __FUNCTION__); + + option_send_setup(port); +} + +static int +option_tiocmget(struct usb_serial_port *port, struct file *file) +{ + unsigned int value; + struct option_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + + value = ((portdata->rts_state) ? TIOCM_RTS : 0) | + ((portdata->dtr_state) ? TIOCM_DTR : 0) | + ((portdata->cts_state) ? TIOCM_CTS : 0) | + ((portdata->dsr_state) ? TIOCM_DSR : 0) | + ((portdata->dcd_state) ? TIOCM_CAR : 0) | + ((portdata->ri_state) ? TIOCM_RNG : 0); + + return value; +} + +static int +option_tiocmset (struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear) +{ + struct option_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + + if (set & TIOCM_RTS) + portdata->rts_state = 1; + if (set & TIOCM_DTR) + portdata->dtr_state = 1; + + if (clear & TIOCM_RTS) + portdata->rts_state = 0; + if (clear & TIOCM_DTR) + portdata->dtr_state = 0; + return option_send_setup(port); +} + +static int +option_ioctl (struct usb_serial_port *port, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return -ENOIOCTLCMD; +} + +/* Write */ +static int +option_write(struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct option_port_private *portdata; + int i; + int left, todo; + struct urb *this_urb = NULL; /* spurious */ + int err; + + portdata = usb_get_serial_port_data(port); + + dbg("%s: write (%d chars)", __FUNCTION__, count); + +#if 0 + spin_lock(&port->lock); + if (port->write_urb_busy) { + spin_unlock(&port->lock); + dbg("%s: already writing", __FUNCTION__); + return 0; + } + port->write_urb_busy = 1; + spin_unlock(&port->lock); +#endif + + i = 0; + left = count; + while (left>0) { + todo = left; + if (todo > OUT_BUFLEN) + todo = OUT_BUFLEN; + + for (;i < N_OUT_URB; i++) { + /* Check we have a valid urb/endpoint before we use it... */ + this_urb = portdata->out_urbs[i]; + if (this_urb->status != -EINPROGRESS) + break; + if (this_urb->transfer_flags & URB_ASYNC_UNLINK) + continue; + if (time_before(jiffies, portdata->tx_start_time[i] + 10 * HZ)) + continue; + this_urb->transfer_flags |= URB_ASYNC_UNLINK; + usb_unlink_urb(this_urb); + } + + if (i == N_OUT_URB) { + /* no bulk out free! */ + dbg("%s: no output urb -- left %d", __FUNCTION__,count-left); +#if 0 + port->write_urb_busy = 0; +#endif + return count-left; + } + + dbg("%s: endpoint %d buf %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), i); + + memcpy (this_urb->transfer_buffer, buf, todo); + + /* send the data out the bulk port */ + this_urb->transfer_buffer_length = todo; + + this_urb->transfer_flags &= ~URB_ASYNC_UNLINK; + this_urb->dev = port->serial->dev; + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err) { + dbg("usb_submit_urb %p (write bulk) failed (%d,, has %d)", this_urb, err, this_urb->status); + continue; + } + portdata->tx_start_time[i] = jiffies; + buf += todo; + left -= todo; + } + + count -= left; +#if 0 + port->write_urb_busy = 0; +#endif + dbg("%s: wrote (did %d)", __FUNCTION__, count); + return count; +} + +static void +option_indat_callback (struct urb *urb, struct pt_regs *regs) +{ + int i, err; + int endpoint; + struct usb_serial_port *port; + struct tty_struct *tty; + unsigned char *data = urb->transfer_buffer; + + dbg("%s: %p", __FUNCTION__, urb); + + endpoint = usb_pipeendpoint(urb->pipe); + port = (struct usb_serial_port *) urb->context; + + if (urb->status) { + dbg("%s: nonzero status: %d on endpoint %02x.", + __FUNCTION__, urb->status, endpoint); + } else { + tty = port->tty; + if (urb->actual_length) { + for (i = 0; i < urb->actual_length ; ++i) { + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + tty_flip_buffer_push(tty); + tty_insert_flip_char(tty, data[i], 0); + } + tty_flip_buffer_push(tty); + } else { + dbg("%s: empty read urb received", __FUNCTION__); + } + + /* Resubmit urb so we continue receiving */ + if (port->open_count && urb->status != -ESHUTDOWN) { + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) + printk(KERN_ERR "%s: resubmit read urb failed. (%d)", __FUNCTION__, err); + } + } + return; +} + +static void +option_outdat_callback (struct urb *urb, struct pt_regs *regs) +{ + struct usb_serial_port *port; + + dbg("%s", __FUNCTION__); + + port = (struct usb_serial_port *) urb->context; + + if (port->open_count) + schedule_work(&port->work); +} + +static void +option_instat_callback (struct urb *urb, struct pt_regs *regs) +{ + int err; + struct usb_serial_port *port = (struct usb_serial_port *) urb->context; + struct option_port_private *portdata = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + + dbg("%s", __FUNCTION__); + dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata); + + if (urb->status == 0) { + struct usb_ctrlrequest *req_pkt = + (struct usb_ctrlrequest *)urb->transfer_buffer; + + if (!req_pkt) { + dbg("%s: NULL req_pkt\n", __FUNCTION__); + return; + } + if ((req_pkt->bRequestType == 0xA1) && (req_pkt->bRequest == 0x20)) { + int old_dcd_state; + unsigned char signals = *((unsigned char *) + urb->transfer_buffer + sizeof(struct usb_ctrlrequest)); + + dbg("%s: signal x%x", __FUNCTION__, signals); + + old_dcd_state = portdata->dcd_state; + portdata->cts_state = 1; + portdata->dcd_state = ((signals & 0x01) ? 1 : 0); + portdata->dsr_state = ((signals & 0x02) ? 1 : 0); + portdata->ri_state = ((signals & 0x08) ? 1 : 0); + + if (port->tty && !C_CLOCAL(port->tty) + && old_dcd_state && !portdata->dcd_state) { + tty_hangup(port->tty); + } + } else + dbg("%s: type %x req %x", __FUNCTION__, req_pkt->bRequestType,req_pkt->bRequest); + } else + dbg("%s: error %d", __FUNCTION__, urb->status); + + /* Resubmit urb so we continue receiving IRQ data */ + if (urb->status != -ESHUTDOWN) { + urb->dev = serial->dev; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) + dbg("%s: resubmit intr urb failed. (%d)", __FUNCTION__, err); + } +} + + +static int +option_write_room (struct usb_serial_port *port) +{ + struct option_port_private *portdata; + int i; + int data_len = 0; + struct urb *this_urb; + + portdata = usb_get_serial_port_data(port); + + for (i=0; i < N_OUT_URB; i++) + this_urb = portdata->out_urbs[i]; + if (this_urb && this_urb->status != -EINPROGRESS) + data_len += OUT_BUFLEN; + + dbg("%s: %d", __FUNCTION__, data_len); + return data_len; +} + + +static int +option_chars_in_buffer (struct usb_serial_port *port) +{ + struct option_port_private *portdata; + int i; + int data_len = 0; + struct urb *this_urb; + + portdata = usb_get_serial_port_data(port); + + for (i=0; i < N_OUT_URB; i++) + this_urb = portdata->out_urbs[i]; + if (this_urb && this_urb->status == -EINPROGRESS) + data_len += this_urb->transfer_buffer_length; + + dbg("%s: %d", __FUNCTION__, data_len); + return data_len; +} + + +static int +option_open (struct usb_serial_port *port, struct file *filp) +{ + struct option_port_private *portdata; + struct usb_serial *serial = port->serial; + int i, err; + struct urb *urb; + + portdata = usb_get_serial_port_data(port); + + dbg("%s", __FUNCTION__); + + /* Set some sane defaults */ + portdata->rts_state = 1; + portdata->dtr_state = 1; + + /* Reset low level data toggle and start reading from endpoints */ + for (i = 0; i < N_IN_URB; i++) { + urb = portdata->in_urbs[i]; + if (! urb) + continue; + if (urb->dev != serial->dev) { + dbg("%s: dev %p != %p", __FUNCTION__, urb->dev, serial->dev); + continue; + } + + /* make sure endpoint data toggle is synchronized with the device */ + + usb_clear_halt(urb->dev, urb->pipe); + + err = usb_submit_urb(urb, GFP_KERNEL); + if (err) { + dbg("%s: submit urb %d failed (%d) %d", __FUNCTION__, i, err, + urb->transfer_buffer_length); + } + } + + /* Reset low level data toggle on out endpoints */ + for (i = 0; i < N_OUT_URB; i++) { + urb = portdata->out_urbs[i]; + if (! urb) + continue; + urb->dev = serial->dev; + /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */ + } + + port->tty->low_latency = 1; + + option_send_setup(port); + + return (0); +} + +static inline void +stop_urb(struct urb *urb) +{ + if (urb && urb->status == -EINPROGRESS) { + urb->transfer_flags &= ~URB_ASYNC_UNLINK; + usb_kill_urb(urb); + } +} + +static void +option_close(struct usb_serial_port *port, struct file *filp) +{ + int i; + struct usb_serial *serial = port->serial; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + portdata = usb_get_serial_port_data(port); + + portdata->rts_state = 0; + portdata->dtr_state = 0; + + if (serial->dev) { + option_send_setup(port); + + /* Stop reading/writing urbs */ + for (i = 0; i < N_IN_URB; i++) + stop_urb(portdata->in_urbs[i]); + for (i = 0; i < N_OUT_URB; i++) + stop_urb(portdata->out_urbs[i]); + } + port->tty = NULL; +} + + +/* Helper functions used by option_setup_urbs */ +static struct urb * +option_setup_urb (struct usb_serial *serial, int endpoint, + int dir, void *ctx, char *buf, int len, + void (*callback)(struct urb *, struct pt_regs *regs)) +{ + struct urb *urb; + + if (endpoint == -1) + return NULL; /* endpoint not needed */ + + urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ + if (urb == NULL) { + dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint); + return NULL; + } + + /* Fill URB using supplied data. */ + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx); + + return urb; +} + +/* Setup urbs */ +static void +option_setup_urbs(struct usb_serial *serial) +{ + int j; + struct usb_serial_port *port; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + port = serial->port[0]; + portdata = usb_get_serial_port_data(port); + + /* Do indat endpoints first */ + for (j = 0; j <= N_IN_URB; ++j) { + portdata->in_urbs[j] = option_setup_urb (serial, + port->bulk_in_endpointAddress, USB_DIR_IN, port, + portdata->in_buffer[j], IN_BUFLEN, option_indat_callback); + } + + /* outdat endpoints */ + for (j = 0; j <= N_OUT_URB; ++j) { + portdata->out_urbs[j] = option_setup_urb (serial, + port->bulk_out_endpointAddress, USB_DIR_OUT, port, + portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback); + } +} + + +static int +option_send_setup(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + portdata = usb_get_serial_port_data(port); + + if (port->tty) { + int val = 0; + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) + val |= 0x02; + + return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT); + } + + return 0; +} + + +static int +option_startup (struct usb_serial *serial) +{ + int i, err; + struct usb_serial_port *port; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + /* Now setup per port private data */ + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + portdata = kmalloc(sizeof(struct option_port_private), GFP_KERNEL); + if (!portdata) { + dbg("%s: kmalloc for option_port_private (%d) failed!.", __FUNCTION__, i); + return (1); + } + memset(portdata, 0, sizeof(struct option_port_private)); + + usb_set_serial_port_data(port, portdata); + + if (! port->interrupt_in_urb) + continue; + err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (err) + dbg("%s: submit irq_in urb failed %d", __FUNCTION__, err); + } + + option_setup_urbs(serial); + + return (0); +} + +static void +option_shutdown (struct usb_serial *serial) +{ + int i, j; + struct usb_serial_port *port; + struct option_port_private *portdata; + + dbg("%s", __FUNCTION__); + + /* Stop reading/writing urbs */ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + for (j = 0; j < N_IN_URB; j++) + stop_urb(portdata->in_urbs[j]); + for (j = 0; j < N_OUT_URB; j++) + stop_urb(portdata->out_urbs[j]); + } + + /* Now free them */ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + + for (j = 0; j < N_IN_URB; j++) { + if (portdata->in_urbs[j]) { + usb_free_urb(portdata->in_urbs[j]); + portdata->in_urbs[j] = NULL; + } + } + for (j = 0; j < N_OUT_URB; j++) { + if (portdata->out_urbs[j]) { + usb_free_urb(portdata->out_urbs[j]); + portdata->out_urbs[j] = NULL; + } + } + } + + /* Now free per port private data */ + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + kfree(usb_get_serial_port_data(port)); + } +} + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug messages"); + diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 4536f63faae..5da76dd8fb2 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1297,13 +1297,6 @@ static int __init usb_serial_init(void) goto exit_bus; } - /* register the generic driver, if we should */ - result = usb_serial_generic_register(debug); - if (result < 0) { - err("%s - registering generic driver failed", __FUNCTION__); - goto exit_generic; - } - usb_serial_tty_driver->owner = THIS_MODULE; usb_serial_tty_driver->driver_name = "usbserial"; usb_serial_tty_driver->devfs_name = "usb/tts/"; @@ -1329,17 +1322,24 @@ static int __init usb_serial_init(void) goto exit_tty; } + /* register the generic driver, if we should */ + result = usb_serial_generic_register(debug); + if (result < 0) { + err("%s - registering generic driver failed", __FUNCTION__); + goto exit_generic; + } + info(DRIVER_DESC " " DRIVER_VERSION); return result; +exit_generic: + usb_deregister(&usb_serial_driver); + exit_tty: tty_unregister_driver(usb_serial_tty_driver); exit_reg_driver: - usb_serial_generic_deregister(); - -exit_generic: bus_unregister(&usb_serial_bus_type); exit_bus: diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index d2891f47579..9fcc7bd1fbe 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -862,6 +862,15 @@ UNUSUAL_DEV( 0x090a, 0x1001, 0x0100, 0x0100, US_SC_DEVICE, US_PR_BULK, NULL, US_FL_NEED_OVERRIDE ), +/* Reported by Filippo Bardelli <filibard@libero.it> + * The device reports a subclass of RBC, which is wrong. + */ +UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100, + "Trumpion Microelectronics, Inc.", + "33520 USB Digital Voice Recorder", + US_SC_UFI, US_PR_DEVICE, NULL, + 0), + /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, "Trumpion", diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/intelfb/intelfbdrv.c index 549e2293926..25f9a9a65c2 100644 --- a/drivers/video/intelfb/intelfbdrv.c +++ b/drivers/video/intelfb/intelfbdrv.c @@ -228,17 +228,17 @@ MODULE_DESCRIPTION( MODULE_LICENSE("Dual BSD/GPL"); MODULE_DEVICE_TABLE(pci, intelfb_pci_table); -static int accel __initdata = 1; -static int vram __initdata = 4; -static int hwcursor __initdata = 1; -static int mtrr __initdata = 1; -static int fixed __initdata = 0; -static int noinit __initdata = 0; -static int noregister __initdata = 0; -static int probeonly __initdata = 0; -static int idonly __initdata = 0; -static int bailearly __initdata = 0; -static char *mode __initdata = NULL; +static int accel = 1; +static int vram = 4; +static int hwcursor = 1; +static int mtrr = 1; +static int fixed = 0; +static int noinit = 0; +static int noregister = 0; +static int probeonly = 0; +static int idonly = 0; +static int bailearly = 0; +static char *mode = NULL; module_param(accel, bool, S_IRUGO); MODULE_PARM_DESC(accel, "Enable console acceleration"); |