diff options
Diffstat (limited to 'drivers')
265 files changed, 7440 insertions, 1644 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 503a908afc8..0bcf2646467 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -112,11 +112,11 @@ config ATA_PIIX If unsure, say N. config SATA_MV - tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Marvell SATA support" help This option enables support for the Marvell Serial ATA family. - Currently supports 88SX[56]0[48][01] chips. + Currently supports 88SX[56]0[48][01] PCI(-X) chips, + as well as the newer [67]042 PCI-X/PCIe and SOC devices. If unsure, say N. diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 96039671e3b..77bba4c083c 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -2548,6 +2548,32 @@ static void ahci_p5wdh_workaround(struct ata_host *host) } } +static bool ahci_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq nx6310", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; @@ -2647,6 +2673,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } + if (ahci_broken_system_poweroff(pdev)) { + pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN; + dev_info(&pdev->dev, + "quirky BIOS, skipping spindown on poweroff\n"); + } + /* CAP.NP sometimes indicate the index of the last enabled * port, at other times, that of the last possible port, so * determining the maximum port number requires looking at diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 887d8f46a28..54961c0b2c7 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1387,6 +1387,32 @@ static void piix_iocfg_bit18_quirk(struct ata_host *host) } } +static bool piix_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq 2510p", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 2510p"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + /** * piix_init_one - Register PIIX ATA PCI device with kernel services * @pdev: PCI device to register @@ -1422,6 +1448,14 @@ static int __devinit piix_init_one(struct pci_dev *pdev, if (!in_module_init) return -ENODEV; + if (piix_broken_system_poweroff(pdev)) { + piix_port_info[ent->driver_data].flags |= + ATA_FLAG_NO_POWEROFF_SPINDOWN | + ATA_FLAG_NO_HIBERNATE_SPINDOWN; + dev_info(&pdev->dev, "quirky BIOS, skipping spindown " + "on poweroff and hibernation\n"); + } + port_info[0] = piix_port_info[ent->driver_data]; port_info[1] = piix_port_info[ent->driver_data]; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index a1a6e6298c3..3c4c5ae277b 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -46,6 +46,7 @@ #include <linux/libata.h> #include <linux/hdreg.h> #include <linux/uaccess.h> +#include <linux/suspend.h> #include "libata.h" @@ -1303,6 +1304,17 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ } else { + /* Some odd clown BIOSen issue spindown on power off (ACPI S4 + * or S5) causing some drives to spin up and down again. + */ + if ((qc->ap->flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) && + system_state == SYSTEM_POWER_OFF) + goto skip; + + if ((qc->ap->flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) && + system_entering_hibernation()) + goto skip; + /* XXX: This is for backward compatibility, will be * removed. Read Documentation/feature-removal-schedule.txt * for more info. @@ -1326,8 +1338,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) scmd->scsi_done = qc->scsidone; qc->scsidone = ata_delayed_done; } - scmd->result = SAM_STAT_GOOD; - return 1; + goto skip; } /* Issue ATA STANDBY IMMEDIATE command */ @@ -1343,10 +1354,13 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) return 0; -invalid_fld: + invalid_fld: ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); /* "Invalid field in cbd" */ return 1; + skip: + scmd->result = SAM_STAT_GOOD; + return 1; } diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 5a4aad123c4..0b299b0f817 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1322,7 +1322,7 @@ fsm_start: * condition. Mark hint. */ ata_ehi_push_desc(ehi, "ST-ATA: " - "DRQ=1 with device error, " + "DRQ=0 without device error, " "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM | AC_ERR_NODEV_HINT; @@ -1358,6 +1358,16 @@ fsm_start: qc->err_mask |= AC_ERR_HSM; } + /* There are oddball controllers with + * status register stuck at 0x7f and + * lbal/m/h at zero which makes it + * pass all other presence detection + * mechanisms we have. Set NODEV_HINT + * for it. Kernel bz#7241. + */ + if (status == 0x7f) + qc->err_mask |= AC_ERR_NODEV_HINT; + /* ata_pio_sectors() might change the * state to HSM_ST_LAST. so, the state * is changed after ata_pio_sectors(). diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index c2e6fb9f2ef..ebfcda26d63 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -63,8 +63,6 @@ static inline void rb532_pata_finish_io(struct ata_port *ap) ata_sff_sync might be sufficient. */ ata_sff_dma_pause(ap); ndelay(RB500_CF_IO_DELAY); - - set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); } static void rb532_pata_exec_command(struct ata_port *ap, diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 681169c9c64..79a6c9a0b72 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -86,6 +86,10 @@ enum { VIA_SATA_PATA = 0x800, /* SATA/PATA combined configuration */ }; +enum { + VIA_IDFLAG_SINGLE = (1 << 0), /* single channel controller) */ +}; + /* * VIA SouthBridge chips. */ @@ -97,8 +101,12 @@ static const struct via_isa_bridge { u8 rev_max; u16 flags; } via_isa_bridges[] = { + { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, + VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, + { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, + VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, @@ -122,6 +130,8 @@ static const struct via_isa_bridge { { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO }, { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK }, { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, + { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, + VIA_UDMA_133 | VIA_BAD_AST }, { NULL } }; @@ -460,6 +470,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static int printed_version; u8 enable; u32 timing; + unsigned long flags = id->driver_data; int rc; if (!printed_version++) @@ -469,9 +480,13 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (rc) return rc; + if (flags & VIA_IDFLAG_SINGLE) + ppi[1] = &ata_dummy_port_info; + /* To find out how the IDE will behave and what features we actually have to look at the bridge not the IDE controller */ - for (config = via_isa_bridges; config->id; config++) + for (config = via_isa_bridges; config->id != PCI_DEVICE_ID_VIA_ANON; + config++) if ((isa = pci_get_device(PCI_VENDOR_ID_VIA + !!(config->flags & VIA_BAD_ID), config->id, NULL))) { @@ -482,10 +497,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) pci_dev_put(isa); } - if (!config->id) { - printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n"); - return -ENODEV; - } pci_dev_put(isa); if (!(config->flags & VIA_NO_ENABLES)) { @@ -587,6 +598,7 @@ static const struct pci_device_id via[] = { { PCI_VDEVICE(VIA, 0x1571), }, { PCI_VDEVICE(VIA, 0x3164), }, { PCI_VDEVICE(VIA, 0x5324), }, + { PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE }, { }, }; diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 86918634a4c..f2d8a020ea5 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -33,10 +33,6 @@ * * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it). * - * --> Investigate problems with PCI Message Signalled Interrupts (MSI). - * - * --> Cache frequently-accessed registers in mv_port_priv to reduce overhead. - * * --> Develop a low-power-consumption strategy, and implement it. * * --> [Experiment, low priority] Investigate interrupt coalescing. @@ -72,7 +68,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.24" +#define DRV_VERSION "1.25" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -351,8 +347,6 @@ enum { EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */ - GEN_II_NCQ_MAX_SECTORS = 256, /* max sects/io on Gen2 w/NCQ */ - /* Host private flags (hp_flags) */ MV_HP_FLAG_MSI = (1 << 0), MV_HP_ERRATA_50XXB0 = (1 << 1), @@ -883,19 +877,15 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, struct mv_host_priv *hpriv = ap->host->private_data; int hardport = mv_hardport_from_port(ap->port_no); void __iomem *hc_mmio = mv_hc_base_from_port( - mv_host_base(ap->host), hardport); - u32 hc_irq_cause, ipending; + mv_host_base(ap->host), ap->port_no); + u32 hc_irq_cause; /* clear EDMA event indicators, if any */ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - /* clear EDMA interrupt indicator, if any */ - hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); - ipending = (DEV_IRQ | DMA_IRQ) << hardport; - if (hc_irq_cause & ipending) { - writelfl(hc_irq_cause & ~ipending, - hc_mmio + HC_IRQ_CAUSE_OFS); - } + /* clear pending irq events */ + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); + writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); mv_edma_cfg(ap, want_ncq); @@ -1099,20 +1089,12 @@ static void mv6_dev_config(struct ata_device *adev) * * Gen-II does not support NCQ over a port multiplier * (no FIS-based switching). - * - * We don't have hob_nsect when doing NCQ commands on Gen-II. - * See mv_qc_prep() for more info. */ if (adev->flags & ATA_DFLAG_NCQ) { if (sata_pmp_attached(adev->link->ap)) { adev->flags &= ~ATA_DFLAG_NCQ; ata_dev_printk(adev, KERN_INFO, "NCQ disabled for command-based switching\n"); - } else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) { - adev->max_sectors = GEN_II_NCQ_MAX_SECTORS; - ata_dev_printk(adev, KERN_INFO, - "max_sectors limited to %u for NCQ\n", - adev->max_sectors); } } } @@ -1450,7 +1432,8 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) * only 11 bytes...so we must pick and choose required * registers based on the command. So, we drop feature and * hob_feature for [RW] DMA commands, but they are needed for - * NCQ. NCQ will drop hob_nsect. + * NCQ. NCQ will drop hob_nsect, which is not needed there + * (nsect is used only for the tag; feat/hob_feat hold true nsect). */ switch (tf->command) { case ATA_CMD_READ: @@ -2214,9 +2197,15 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) struct ata_host *host = dev_instance; struct mv_host_priv *hpriv = host->private_data; unsigned int handled = 0; + int using_msi = hpriv->hp_flags & MV_HP_FLAG_MSI; u32 main_irq_cause, pending_irqs; spin_lock(&host->lock); + + /* for MSI: block new interrupts while in here */ + if (using_msi) + writel(0, hpriv->main_irq_mask_addr); + main_irq_cause = readl(hpriv->main_irq_cause_addr); pending_irqs = main_irq_cause & hpriv->main_irq_mask; /* @@ -2230,6 +2219,11 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) handled = mv_host_intr(host, pending_irqs); } spin_unlock(&host->lock); + + /* for MSI: unmask; interrupt cause bits will retrigger now */ + if (using_msi) + writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr); + return IRQ_RETVAL(handled); } @@ -2821,8 +2815,7 @@ static void mv_eh_thaw(struct ata_port *ap) writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); /* clear pending irq events */ - hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); - hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport); + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); mv_enable_port_irqs(ap, ERR_IRQ); @@ -3075,6 +3068,9 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS; } + /* initialize shadow irq mask with register's value */ + hpriv->main_irq_mask = readl(hpriv->main_irq_mask_addr); + /* global interrupt mask: 0 == mask everything */ mv_set_main_irq_mask(host, ~0, 0); @@ -3430,9 +3426,9 @@ static int mv_pci_init_one(struct pci_dev *pdev, if (rc) return rc; - /* Enable interrupts */ - if (msi && pci_enable_msi(pdev)) - pci_intx(pdev, 1); + /* Enable message-switched interrupts, if requested */ + if (msi && pci_enable_msi(pdev) == 0) + hpriv->hp_flags |= MV_HP_FLAG_MSI; mv_dump_pci_cfg(pdev, 0x68); mv_print_info(host); diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 6f146061432..c49ad0e61b6 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -305,10 +305,10 @@ static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance); static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static void nv_nf2_freeze(struct ata_port *ap); static void nv_nf2_thaw(struct ata_port *ap); -static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline); static void nv_ck804_freeze(struct ata_port *ap); static void nv_ck804_thaw(struct ata_port *ap); static int nv_adma_slave_config(struct scsi_device *sdev); @@ -352,6 +352,7 @@ enum nv_host_type NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */ CK804, ADMA, + MCP5x, SWNCQ, }; @@ -363,10 +364,10 @@ static const struct pci_device_id nv_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), SWNCQ }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), SWNCQ }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), SWNCQ }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), SWNCQ }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), MCP5x }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC }, @@ -432,7 +433,7 @@ static struct ata_port_operations nv_nf2_ops = { .inherits = &nv_common_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, - .hardreset = nv_nf2_hardreset, + .hardreset = nv_noclassify_hardreset, }; /* CK804 finally gets hardreset right */ @@ -467,8 +468,19 @@ static struct ata_port_operations nv_adma_ops = { .host_stop = nv_adma_host_stop, }; +/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to + * work, hardreset should be used and hardreset can't report proper + * signature, which suggests that mcp5x is closer to nf2 as long as + * reset quirkiness is concerned. Define separate ops for mcp5x with + * nv_noclassify_hardreset(). + */ +static struct ata_port_operations nv_mcp5x_ops = { + .inherits = &nv_common_ops, + .hardreset = nv_noclassify_hardreset, +}; + static struct ata_port_operations nv_swncq_ops = { - .inherits = &nv_generic_ops, + .inherits = &nv_mcp5x_ops, .qc_defer = ata_std_qc_defer, .qc_prep = nv_swncq_qc_prep, @@ -531,6 +543,15 @@ static const struct ata_port_info nv_port_info[] = { .port_ops = &nv_adma_ops, .private_data = NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht), }, + /* MCP5x */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_mcp5x_ops, + .private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht), + }, /* SWNCQ */ { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | @@ -1530,6 +1551,17 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) return 0; } +static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + bool online; + int rc; + + rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, + &online, NULL); + return online ? -EAGAIN : rc; +} + static void nv_nf2_freeze(struct ata_port *ap) { void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr; @@ -1554,17 +1586,6 @@ static void nv_nf2_thaw(struct ata_port *ap) iowrite8(mask, scr_addr + NV_INT_ENABLE); } -static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - bool online; - int rc; - - rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, - &online, NULL); - return online ? -EAGAIN : rc; -} - static void nv_ck804_freeze(struct ata_port *ap) { void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR]; @@ -2355,14 +2376,9 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (type == CK804 && adma_enabled) { dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n"); type = ADMA; - } - - if (type == SWNCQ) { - if (swncq_enabled) - dev_printk(KERN_NOTICE, &pdev->dev, - "Using SWNCQ mode\n"); - else - type = GENERIC; + } else if (type == MCP5x && swncq_enabled) { + dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n"); + type = SWNCQ; } ppi[0] = &nv_port_info[type]; diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 564c142b03b..9f029595f45 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -44,6 +44,7 @@ #include <linux/device.h> #include <scsi/scsi_host.h> #include <linux/libata.h> +#include <linux/dmi.h> #define DRV_NAME "sata_sil" #define DRV_VERSION "2.4" @@ -695,11 +696,38 @@ static void sil_init_controller(struct ata_host *host) } } +static bool sil_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq nx6325", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x12UL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; int board_id = ent->driver_data; - const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL }; + struct ata_port_info pi = sil_port_info[board_id]; + const struct ata_port_info *ppi[] = { &pi, NULL }; struct ata_host *host; void __iomem *mmio_base; int n_ports, rc; @@ -713,6 +741,13 @@ static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (board_id == sil_3114) n_ports = 4; + if (sil_broken_system_poweroff(pdev)) { + pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN | + ATA_FLAG_NO_HIBERNATE_SPINDOWN; + dev_info(&pdev->dev, "quirky BIOS, skipping spindown " + "on poweroff and hibernation\n"); + } + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); if (!host) return -ENOMEM; diff --git a/drivers/base/core.c b/drivers/base/core.c index 55e530942ab..f3eae630e58 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1280,7 +1280,7 @@ EXPORT_SYMBOL_GPL(__root_device_register); /** * root_device_unregister - unregister and free a root device - * @root: device going away. + * @dev: device going away * * This function unregisters and cleans up a device that was created by * root_device_register(). diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index d4e7dca06e4..ba68a4671cb 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -102,7 +102,7 @@ static int __init omap_rng_probe(struct platform_device *pdev) return -EBUSY; if (cpu_is_omap24xx()) { - rng_ick = clk_get(NULL, "rng_ick"); + rng_ick = clk_get(&pdev->dev, "rng_ick"); if (IS_ERR(rng_ick)) { dev_err(&pdev->dev, "Could not get rng_ick\n"); ret = PTR_ERR(rng_ick); diff --git a/drivers/char/selection.c b/drivers/char/selection.c index f29fbe9b8ed..cb8ca569896 100644 --- a/drivers/char/selection.c +++ b/drivers/char/selection.c @@ -268,7 +268,7 @@ int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *t /* Allocate a new buffer before freeing the old one ... */ multiplier = use_unicode ? 3 : 1; /* chars can take up to 3 bytes */ - bp = kmalloc((sel_end-sel_start)/2*multiplier+1, GFP_KERNEL); + bp = kmalloc(((sel_end-sel_start)/2+1)*multiplier, GFP_KERNEL); if (!bp) { printk(KERN_WARNING "selection: kmalloc() failed\n"); clear_selection(); diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index d33e5ab0617..bc84e125c6b 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1817,8 +1817,10 @@ got_driver: /* check whether we're reopening an existing tty */ tty = tty_driver_lookup_tty(driver, inode, index); - if (IS_ERR(tty)) + if (IS_ERR(tty)) { + mutex_unlock(&tty_mutex); return PTR_ERR(tty); + } } if (tty) { diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c index cd2e3b8087e..24f3ca85152 100644 --- a/drivers/edac/cell_edac.c +++ b/drivers/edac/cell_edac.c @@ -36,7 +36,7 @@ static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar) struct csrow_info *csrow = &mci->csrows[0]; unsigned long address, pfn, offset, syndrome; - dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016lx\n", + dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016llx\n", priv->node, chan, ar); /* Address decoding is likely a bit bogus, to dbl check */ @@ -58,7 +58,7 @@ static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar) struct csrow_info *csrow = &mci->csrows[0]; unsigned long address, pfn, offset; - dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016lx\n", + dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016llx\n", priv->node, chan, ar); /* Address decoding is likely a bit bogus, to dbl check */ @@ -169,7 +169,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev) /* Get channel population */ reg = in_be64(®s->mic_mnt_cfg); - dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016lx\n", reg); + dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016llx\n", reg); chanmask = 0; if (reg & CBE_MIC_MNT_CFG_CHAN_0_POP) chanmask |= 0x1; @@ -180,7 +180,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev) "Yuck ! No channel populated ? Aborting !\n"); return -ENODEV; } - dev_dbg(&pdev->dev, "Initial FIR = 0x%016lx\n", + dev_dbg(&pdev->dev, "Initial FIR = 0x%016llx\n", in_be64(®s->mic_fir)); /* Allocate & init EDAC MC data structure */ diff --git a/drivers/firewire/fw-card.c b/drivers/firewire/fw-card.c index 6bd91a15d5e..7be2cf3514e 100644 --- a/drivers/firewire/fw-card.c +++ b/drivers/firewire/fw-card.c @@ -232,7 +232,7 @@ fw_card_bm_work(struct work_struct *work) root_id = root_node->node_id; grace = time_after(jiffies, card->reset_jiffies + DIV_ROUND_UP(HZ, 10)); - if (card->bm_generation + 1 == generation || + if (is_next_generation(generation, card->bm_generation) || (card->bm_generation != generation && grace)) { /* * This first step is to figure out who is IRM and @@ -512,7 +512,7 @@ fw_core_remove_card(struct fw_card *card) fw_core_initiate_bus_reset(card, 1); mutex_lock(&card_mutex); - list_del(&card->link); + list_del_init(&card->link); mutex_unlock(&card_mutex); /* Set up the dummy driver. */ diff --git a/drivers/firewire/fw-device.c b/drivers/firewire/fw-device.c index 2af5a8d1e01..bf53acb4565 100644 --- a/drivers/firewire/fw-device.c +++ b/drivers/firewire/fw-device.c @@ -25,6 +25,7 @@ #include <linux/device.h> #include <linux/delay.h> #include <linux/idr.h> +#include <linux/jiffies.h> #include <linux/string.h> #include <linux/rwsem.h> #include <linux/semaphore.h> @@ -634,12 +635,39 @@ struct fw_device *fw_device_get_by_devt(dev_t devt) return device; } +/* + * These defines control the retry behavior for reading the config + * rom. It shouldn't be necessary to tweak these; if the device + * doesn't respond to a config rom read within 10 seconds, it's not + * going to respond at all. As for the initial delay, a lot of + * devices will be able to respond within half a second after bus + * reset. On the other hand, it's not really worth being more + * aggressive than that, since it scales pretty well; if 10 devices + * are plugged in, they're all getting read within one second. + */ + +#define MAX_RETRIES 10 +#define RETRY_DELAY (3 * HZ) +#define INITIAL_DELAY (HZ / 2) +#define SHUTDOWN_DELAY (2 * HZ) + static void fw_device_shutdown(struct work_struct *work) { struct fw_device *device = container_of(work, struct fw_device, work.work); int minor = MINOR(device->device.devt); + if (time_is_after_jiffies(device->card->reset_jiffies + SHUTDOWN_DELAY) + && !list_empty(&device->card->link)) { + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); + return; + } + + if (atomic_cmpxchg(&device->state, + FW_DEVICE_GONE, + FW_DEVICE_SHUTDOWN) != FW_DEVICE_GONE) + return; + fw_device_cdev_remove(device); device_for_each_child(&device->device, NULL, shutdown_unit); device_unregister(&device->device); @@ -647,6 +675,7 @@ static void fw_device_shutdown(struct work_struct *work) down_write(&fw_device_rwsem); idr_remove(&fw_device_idr, minor); up_write(&fw_device_rwsem); + fw_device_put(device); } @@ -654,25 +683,63 @@ static struct device_type fw_device_type = { .release = fw_device_release, }; +static void fw_device_update(struct work_struct *work); + /* - * These defines control the retry behavior for reading the config - * rom. It shouldn't be necessary to tweak these; if the device - * doesn't respond to a config rom read within 10 seconds, it's not - * going to respond at all. As for the initial delay, a lot of - * devices will be able to respond within half a second after bus - * reset. On the other hand, it's not really worth being more - * aggressive than that, since it scales pretty well; if 10 devices - * are plugged in, they're all getting read within one second. + * If a device was pending for deletion because its node went away but its + * bus info block and root directory header matches that of a newly discovered + * device, revive the existing fw_device. + * The newly allocated fw_device becomes obsolete instead. */ +static int lookup_existing_device(struct device *dev, void *data) +{ + struct fw_device *old = fw_device(dev); + struct fw_device *new = data; + struct fw_card *card = new->card; + int match = 0; + + down_read(&fw_device_rwsem); /* serialize config_rom access */ + spin_lock_irq(&card->lock); /* serialize node access */ + + if (memcmp(old->config_rom, new->config_rom, 6 * 4) == 0 && + atomic_cmpxchg(&old->state, + FW_DEVICE_GONE, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) { + struct fw_node *current_node = new->node; + struct fw_node *obsolete_node = old->node; + + new->node = obsolete_node; + new->node->data = new; + old->node = current_node; + old->node->data = old; + + old->max_speed = new->max_speed; + old->node_id = current_node->node_id; + smp_wmb(); /* update node_id before generation */ + old->generation = card->generation; + old->config_rom_retries = 0; + fw_notify("rediscovered device %s\n", dev_name(dev)); -#define MAX_RETRIES 10 -#define RETRY_DELAY (3 * HZ) -#define INITIAL_DELAY (HZ / 2) + PREPARE_DELAYED_WORK(&old->work, fw_device_update); + schedule_delayed_work(&old->work, 0); + + if (current_node == card->root_node) + fw_schedule_bm_work(card, 0); + + match = 1; + } + + spin_unlock_irq(&card->lock); + up_read(&fw_device_rwsem); + + return match; +} static void fw_device_init(struct work_struct *work) { struct fw_device *device = container_of(work, struct fw_device, work.work); + struct device *revived_dev; int minor, err; /* @@ -696,6 +763,15 @@ static void fw_device_init(struct work_struct *work) return; } + revived_dev = device_find_child(device->card->device, + device, lookup_existing_device); + if (revived_dev) { + put_device(revived_dev); + fw_device_release(&device->device); + + return; + } + device_initialize(&device->device); fw_device_get(device); @@ -734,9 +810,10 @@ static void fw_device_init(struct work_struct *work) * fw_node_event(). */ if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) { - fw_device_shutdown(work); + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) { + PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); } else { if (device->config_rom_retries) fw_notify("created device %s: GUID %08x%08x, S%d00, " @@ -847,8 +924,8 @@ static void fw_device_refresh(struct work_struct *work) case REREAD_BIB_UNCHANGED: if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) goto gone; fw_device_update(work); @@ -879,8 +956,8 @@ static void fw_device_refresh(struct work_struct *work) create_units(device); if (atomic_cmpxchg(&device->state, - FW_DEVICE_INITIALIZING, - FW_DEVICE_RUNNING) == FW_DEVICE_SHUTDOWN) + FW_DEVICE_INITIALIZING, + FW_DEVICE_RUNNING) == FW_DEVICE_GONE) goto gone; fw_notify("refreshed device %s\n", dev_name(&device->device)); @@ -890,8 +967,9 @@ static void fw_device_refresh(struct work_struct *work) give_up: fw_notify("giving up on refresh of device %s\n", dev_name(&device->device)); gone: - atomic_set(&device->state, FW_DEVICE_SHUTDOWN); - fw_device_shutdown(work); + atomic_set(&device->state, FW_DEVICE_GONE); + PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); + schedule_delayed_work(&device->work, SHUTDOWN_DELAY); out: if (node_id == card->root_node->node_id) fw_schedule_bm_work(card, 0); @@ -995,9 +1073,10 @@ void fw_node_event(struct fw_card *card, struct fw_node *node, int event) */ device = node->data; if (atomic_xchg(&device->state, - FW_DEVICE_SHUTDOWN) == FW_DEVICE_RUNNING) { + FW_DEVICE_GONE) == FW_DEVICE_RUNNING) { PREPARE_DELAYED_WORK(&device->work, fw_device_shutdown); - schedule_delayed_work(&device->work, 0); + schedule_delayed_work(&device->work, + list_empty(&card->link) ? 0 : SHUTDOWN_DELAY); } break; } diff --git a/drivers/firewire/fw-device.h b/drivers/firewire/fw-device.h index df51732608d..8ef6ec2ca21 100644 --- a/drivers/firewire/fw-device.h +++ b/drivers/firewire/fw-device.h @@ -28,6 +28,7 @@ enum fw_device_state { FW_DEVICE_INITIALIZING, FW_DEVICE_RUNNING, + FW_DEVICE_GONE, FW_DEVICE_SHUTDOWN, }; diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index ab9c01e462e..6d19828a93a 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -226,7 +226,7 @@ static inline struct fw_ohci *fw_ohci(struct fw_card *card) #define CONTEXT_DEAD 0x0800 #define CONTEXT_ACTIVE 0x0400 -#define OHCI1394_MAX_AT_REQ_RETRIES 0x2 +#define OHCI1394_MAX_AT_REQ_RETRIES 0xf #define OHCI1394_MAX_AT_RESP_RETRIES 0x2 #define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8 @@ -896,11 +896,11 @@ static void context_stop(struct context *ctx) for (i = 0; i < 10; i++) { reg = reg_read(ctx->ohci, CONTROL_SET(ctx->regs)); if ((reg & CONTEXT_ACTIVE) == 0) - break; + return; - fw_notify("context_stop: still active (0x%08x)\n", reg); mdelay(1); } + fw_error("Error: DMA context still active (0x%08x)\n", reg); } struct driver_data { diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index e88d5067448..c71c4419d9e 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -168,6 +168,7 @@ struct sbp2_target { int address_high; unsigned int workarounds; unsigned int mgt_orb_timeout; + unsigned int max_payload; int dont_block; /* counter for each logical unit */ int blocked; /* ditto */ @@ -310,14 +311,16 @@ struct sbp2_command_orb { dma_addr_t page_table_bus; }; +#define SBP2_ROM_VALUE_WILDCARD ~0 /* match all */ +#define SBP2_ROM_VALUE_MISSING 0xff000000 /* not present in the unit dir. */ + /* * List of devices with known bugs. * * The firmware_revision field, masked with 0xffff00, is the best * indicator for the type of bridge chip of a device. It yields a few * false positives but this did not break correctly behaving devices - * so far. We use ~0 as a wildcard, since the 24 bit values we get - * from the config rom can never match that. + * so far. */ static const struct { u32 firmware_revision; @@ -339,33 +342,35 @@ static const struct { }, /* Initio bridges, actually only needed for some older ones */ { .firmware_revision = 0x000200, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_INQUIRY_36, }, /* PL-3507 bridge with Prolific firmware */ { .firmware_revision = 0x012800, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_POWER_CONDITION, }, /* Symbios bridge */ { .firmware_revision = 0xa0b800, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ { .firmware_revision = 0x002600, - .model = ~0, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, - /* - * There are iPods (2nd gen, 3rd gen) with model_id == 0, but - * these iPods do not feature the read_capacity bug according - * to one report. Read_capacity behaviour as well as model_id - * could change due to Apple-supplied firmware updates though. + * iPod 2nd generation: needs 128k max transfer size workaround + * iPod 3rd generation: needs fix capacity workaround */ - - /* iPod 4th generation. */ { + { + .firmware_revision = 0x0a2700, + .model = 0x000000, + .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS | + SBP2_WORKAROUND_FIX_CAPACITY, + }, + /* iPod 4th generation */ { .firmware_revision = 0x0a2700, .model = 0x000021, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, @@ -1092,7 +1097,7 @@ static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model, continue; if (sbp2_workarounds_table[i].model != model && - sbp2_workarounds_table[i].model != ~0) + sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD) continue; w |= sbp2_workarounds_table[i].workarounds; @@ -1142,20 +1147,28 @@ static int sbp2_probe(struct device *dev) fw_device_get(device); fw_unit_get(unit); - /* Initialize to values that won't match anything in our table. */ - firmware_revision = 0xff000000; - model = 0xff000000; - /* implicit directory ID */ tgt->directory_id = ((unit->directory - device->config_rom) * 4 + CSR_CONFIG_ROM) & 0xffffff; + firmware_revision = SBP2_ROM_VALUE_MISSING; + model = SBP2_ROM_VALUE_MISSING; + if (sbp2_scan_unit_dir(tgt, unit->directory, &model, &firmware_revision) < 0) goto fail_tgt_put; sbp2_init_workarounds(tgt, model, firmware_revision); + /* + * At S100 we can do 512 bytes per packet, at S200 1024 bytes, + * and so on up to 4096 bytes. The SBP-2 max_payload field + * specifies the max payload size as 2 ^ (max_payload + 2), so + * if we set this to max_speed + 7, we get the right value. + */ + tgt->max_payload = min(device->max_speed + 7, 10U); + tgt->max_payload = min(tgt->max_payload, device->card->max_receive - 1); + /* Do the login in a workqueue so we can easily reschedule retries. */ list_for_each_entry(lu, &tgt->lu_list, link) sbp2_queue_work(lu, DIV_ROUND_UP(HZ, 5)); @@ -1273,6 +1286,19 @@ static struct fw_driver sbp2_driver = { .id_table = sbp2_id_table, }; +static void sbp2_unmap_scatterlist(struct device *card_device, + struct sbp2_command_orb *orb) +{ + if (scsi_sg_count(orb->cmd)) + dma_unmap_sg(card_device, scsi_sglist(orb->cmd), + scsi_sg_count(orb->cmd), + orb->cmd->sc_data_direction); + + if (orb->request.misc & cpu_to_be32(COMMAND_ORB_PAGE_TABLE_PRESENT)) + dma_unmap_single(card_device, orb->page_table_bus, + sizeof(orb->page_table), DMA_TO_DEVICE); +} + static unsigned int sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data) { @@ -1352,15 +1378,7 @@ complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status) dma_unmap_single(device->card->device, orb->base.request_bus, sizeof(orb->request), DMA_TO_DEVICE); - - if (scsi_sg_count(orb->cmd) > 0) - dma_unmap_sg(device->card->device, scsi_sglist(orb->cmd), - scsi_sg_count(orb->cmd), - orb->cmd->sc_data_direction); - - if (orb->page_table_bus != 0) - dma_unmap_single(device->card->device, orb->page_table_bus, - sizeof(orb->page_table), DMA_TO_DEVICE); + sbp2_unmap_scatterlist(device->card->device, orb); orb->cmd->result = result; orb->done(orb->cmd); @@ -1434,7 +1452,6 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) struct sbp2_logical_unit *lu = cmd->device->hostdata; struct fw_device *device = fw_device(lu->tgt->unit->device.parent); struct sbp2_command_orb *orb; - unsigned int max_payload; int generation, retval = SCSI_MLQUEUE_HOST_BUSY; /* @@ -1462,17 +1479,9 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) orb->done = done; orb->cmd = cmd; - orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL); - /* - * At speed 100 we can do 512 bytes per packet, at speed 200, - * 1024 bytes per packet etc. The SBP-2 max_payload field - * specifies the max payload size as 2 ^ (max_payload + 2), so - * if we set this to max_speed + 7, we get the right value. - */ - max_payload = min(device->max_speed + 7, - device->card->max_receive - 1); + orb->request.next.high = cpu_to_be32(SBP2_ORB_NULL); orb->request.misc = cpu_to_be32( - COMMAND_ORB_MAX_PAYLOAD(max_payload) | + COMMAND_ORB_MAX_PAYLOAD(lu->tgt->max_payload) | COMMAND_ORB_SPEED(device->max_speed) | COMMAND_ORB_NOTIFY); @@ -1491,8 +1500,10 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done) orb->base.request_bus = dma_map_single(device->card->device, &orb->request, sizeof(orb->request), DMA_TO_DEVICE); - if (dma_mapping_error(device->card->device, orb->base.request_bus)) + if (dma_mapping_error(device->card->device, orb->base.request_bus)) { + sbp2_unmap_scatterlist(device->card->device, orb); goto out; + } sbp2_send_orb(&orb->base, lu, lu->tgt->node_id, generation, lu->command_block_agent_address + SBP2_ORB_POINTER); diff --git a/drivers/firewire/fw-topology.c b/drivers/firewire/fw-topology.c index c9be6e6948c..8dd6703b55c 100644 --- a/drivers/firewire/fw-topology.c +++ b/drivers/firewire/fw-topology.c @@ -518,6 +518,18 @@ fw_core_handle_bus_reset(struct fw_card *card, struct fw_node *local_node; unsigned long flags; + /* + * If the selfID buffer is not the immediate successor of the + * previously processed one, we cannot reliably compare the + * old and new topologies. + */ + if (!is_next_generation(generation, card->generation) && + card->local_node != NULL) { + fw_notify("skipped bus generations, destroying all nodes\n"); + fw_destroy_nodes(card); + card->bm_retries = 0; + } + spin_lock_irqsave(&card->lock, flags); card->node_id = node_id; diff --git a/drivers/firewire/fw-transaction.h b/drivers/firewire/fw-transaction.h index c9ab12a15f6..1d78e9cc594 100644 --- a/drivers/firewire/fw-transaction.h +++ b/drivers/firewire/fw-transaction.h @@ -276,6 +276,15 @@ static inline void fw_card_put(struct fw_card *card) extern void fw_schedule_bm_work(struct fw_card *card, unsigned long delay); /* + * Check whether new_generation is the immediate successor of old_generation. + * Take counter roll-over at 255 (as per to OHCI) into account. + */ +static inline bool is_next_generation(int new_generation, int old_generation) +{ + return (new_generation & 0xff) == ((old_generation + 1) & 0xff); +} + +/* * The iso packet format allows for an immediate header/payload part * stored in 'header' immediately after the packet info plus an * indirect payload part that is pointer to by the 'payload' field. diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index d76adfea5df..8f0f7c44930 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -415,6 +415,29 @@ void __init dmi_scan_machine(void) } /** + * dmi_matches - check if dmi_system_id structure matches system DMI data + * @dmi: pointer to the dmi_system_id structure to check + */ +static bool dmi_matches(const struct dmi_system_id *dmi) +{ + int i; + + WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n"); + + for (i = 0; i < ARRAY_SIZE(dmi->matches); i++) { + int s = dmi->matches[i].slot; + if (s == DMI_NONE) + continue; + if (dmi_ident[s] + && strstr(dmi_ident[s], dmi->matches[i].substr)) + continue; + /* No match */ + return false; + } + return true; +} + +/** * dmi_check_system - check system DMI data * @list: array of dmi_system_id structures to match against * All non-null elements of the list must match @@ -429,32 +452,45 @@ void __init dmi_scan_machine(void) */ int dmi_check_system(const struct dmi_system_id *list) { - int i, count = 0; - const struct dmi_system_id *d = list; - - WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n"); - - while (d->ident) { - for (i = 0; i < ARRAY_SIZE(d->matches); i++) { - int s = d->matches[i].slot; - if (s == DMI_NONE) - continue; - if (dmi_ident[s] && strstr(dmi_ident[s], d->matches[i].substr)) - continue; - /* No match */ - goto fail; + int count = 0; + const struct dmi_system_id *d; + + for (d = list; d->ident; d++) + if (dmi_matches(d)) { + count++; + if (d->callback && d->callback(d)) + break; } - count++; - if (d->callback && d->callback(d)) - break; -fail: d++; - } return count; } EXPORT_SYMBOL(dmi_check_system); /** + * dmi_first_match - find dmi_system_id structure matching system DMI data + * @list: array of dmi_system_id structures to match against + * All non-null elements of the list must match + * their slot's (field index's) data (i.e., each + * list string must be a substring of the specified + * DMI slot's string data) to be considered a + * successful match. + * + * Walk the blacklist table until the first match is found. Return the + * pointer to the matching entry or NULL if there's no match. + */ +const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list) +{ + const struct dmi_system_id *d; + + for (d = list; d->ident; d++) + if (dmi_matches(d)) + return d; + + return NULL; +} +EXPORT_SYMBOL(dmi_first_match); + +/** * dmi_get_system_info - return DMI data value * @field: data index (see enum dmi_field) * diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 35e7aea4222..42fb2fd24c0 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -789,6 +789,7 @@ int gpio_request(unsigned gpio, const char *label) } else { status = -EBUSY; module_put(chip->owner); + goto done; } if (chip->request) { diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 9da58145287..6915fb82d0b 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -136,7 +136,7 @@ drm_gem_object_alloc(struct drm_device *dev, size_t size) obj = kcalloc(1, sizeof(*obj), GFP_KERNEL); obj->dev = dev; - obj->filp = shmem_file_setup("drm mm object", size, 0); + obj->filp = shmem_file_setup("drm mm object", size, VM_NORESERVE); if (IS_ERR(obj->filp)) { kfree(obj); return NULL; diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 477caa1b1e4..69aa0ab2840 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -106,8 +106,6 @@ void drm_vblank_cleanup(struct drm_device *dev) drm_free(dev->vbl_queue, sizeof(*dev->vbl_queue) * dev->num_crtcs, DRM_MEM_DRIVER); - drm_free(dev->vbl_sigs, sizeof(*dev->vbl_sigs) * dev->num_crtcs, - DRM_MEM_DRIVER); drm_free(dev->_vblank_count, sizeof(*dev->_vblank_count) * dev->num_crtcs, DRM_MEM_DRIVER); drm_free(dev->vblank_refcount, sizeof(*dev->vblank_refcount) * @@ -132,7 +130,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs) setup_timer(&dev->vblank_disable_timer, vblank_disable_fn, (unsigned long)dev); spin_lock_init(&dev->vbl_lock); - atomic_set(&dev->vbl_signal_pending, 0); dev->num_crtcs = num_crtcs; dev->vbl_queue = drm_alloc(sizeof(wait_queue_head_t) * num_crtcs, @@ -140,11 +137,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs) if (!dev->vbl_queue) goto err; - dev->vbl_sigs = drm_alloc(sizeof(struct list_head) * num_crtcs, - DRM_MEM_DRIVER); - if (!dev->vbl_sigs) - goto err; - dev->_vblank_count = drm_alloc(sizeof(atomic_t) * num_crtcs, DRM_MEM_DRIVER); if (!dev->_vblank_count) @@ -177,7 +169,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs) /* Zero per-crtc vblank stuff */ for (i = 0; i < num_crtcs; i++) { init_waitqueue_head(&dev->vbl_queue[i]); - INIT_LIST_HEAD(&dev->vbl_sigs[i]); atomic_set(&dev->_vblank_count[i], 0); atomic_set(&dev->vblank_refcount[i], 0); } @@ -540,15 +531,10 @@ out: * \param data user argument, pointing to a drm_wait_vblank structure. * \return zero on success or a negative number on failure. * - * Verifies the IRQ is installed. - * - * If a signal is requested checks if this task has already scheduled the same signal - * for the same vblank sequence number - nothing to be done in - * that case. If the number of tasks waiting for the interrupt exceeds 100 the - * function fails. Otherwise adds a new entry to drm_device::vbl_sigs for this - * task. - * - * If a signal is not requested, then calls vblank_wait(). + * This function enables the vblank interrupt on the pipe requested, then + * sleeps waiting for the requested sequence number to occur, and drops + * the vblank interrupt refcount afterwards. (vblank irq disable follows that + * after a timeout with no further vblank waits scheduled). */ int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -560,6 +546,9 @@ int drm_wait_vblank(struct drm_device *dev, void *data, if ((!dev->pdev->irq) || (!dev->irq_enabled)) return -EINVAL; + if (vblwait->request.type & _DRM_VBLANK_SIGNAL) + return -EINVAL; + if (vblwait->request.type & ~(_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK)) { DRM_ERROR("Unsupported type value 0x%x, supported mask 0x%x\n", @@ -597,89 +586,26 @@ int drm_wait_vblank(struct drm_device *dev, void *data, vblwait->request.sequence = seq + 1; } - if (flags & _DRM_VBLANK_SIGNAL) { - unsigned long irqflags; - struct list_head *vbl_sigs = &dev->vbl_sigs[crtc]; - struct drm_vbl_sig *vbl_sig; - - spin_lock_irqsave(&dev->vbl_lock, irqflags); - - /* Check if this task has already scheduled the same signal - * for the same vblank sequence number; nothing to be done in - * that case - */ - list_for_each_entry(vbl_sig, vbl_sigs, head) { - if (vbl_sig->sequence == vblwait->request.sequence - && vbl_sig->info.si_signo == - vblwait->request.signal - && vbl_sig->task == current) { - spin_unlock_irqrestore(&dev->vbl_lock, - irqflags); - vblwait->reply.sequence = seq; - goto done; - } - } - - if (atomic_read(&dev->vbl_signal_pending) >= 100) { - spin_unlock_irqrestore(&dev->vbl_lock, irqflags); - ret = -EBUSY; - goto done; - } - - spin_unlock_irqrestore(&dev->vbl_lock, irqflags); - - vbl_sig = drm_calloc(1, sizeof(struct drm_vbl_sig), - DRM_MEM_DRIVER); - if (!vbl_sig) { - ret = -ENOMEM; - goto done; - } - - /* Get a refcount on the vblank, which will be released by - * drm_vbl_send_signals(). - */ - ret = drm_vblank_get(dev, crtc); - if (ret) { - drm_free(vbl_sig, sizeof(struct drm_vbl_sig), - DRM_MEM_DRIVER); - goto done; - } - - atomic_inc(&dev->vbl_signal_pending); - - vbl_sig->sequence = vblwait->request.sequence; - vbl_sig->info.si_signo = vblwait->request.signal; - vbl_sig->task = current; + DRM_DEBUG("waiting on vblank count %d, crtc %d\n", + vblwait->request.sequence, crtc); + dev->last_vblank_wait[crtc] = vblwait->request.sequence; + DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ, + (((drm_vblank_count(dev, crtc) - + vblwait->request.sequence) <= (1 << 23)) || + !dev->irq_enabled)); - spin_lock_irqsave(&dev->vbl_lock, irqflags); - - list_add_tail(&vbl_sig->head, vbl_sigs); + if (ret != -EINTR) { + struct timeval now; - spin_unlock_irqrestore(&dev->vbl_lock, irqflags); + do_gettimeofday(&now); - vblwait->reply.sequence = seq; + vblwait->reply.tval_sec = now.tv_sec; + vblwait->reply.tval_usec = now.tv_usec; + vblwait->reply.sequence = drm_vblank_count(dev, crtc); + DRM_DEBUG("returning %d to client\n", + vblwait->reply.sequence); } else { - DRM_DEBUG("waiting on vblank count %d, crtc %d\n", - vblwait->request.sequence, crtc); - dev->last_vblank_wait[crtc] = vblwait->request.sequence; - DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ, - (((drm_vblank_count(dev, crtc) - - vblwait->request.sequence) <= (1 << 23)) || - !dev->irq_enabled)); - - if (ret != -EINTR) { - struct timeval now; - - do_gettimeofday(&now); - - vblwait->reply.tval_sec = now.tv_sec; - vblwait->reply.tval_usec = now.tv_usec; - vblwait->reply.sequence = drm_vblank_count(dev, crtc); - DRM_DEBUG("returning %d to client\n", - vblwait->reply.sequence); - } else { - DRM_DEBUG("vblank wait interrupted by signal\n"); - } + DRM_DEBUG("vblank wait interrupted by signal\n"); } done: @@ -688,46 +614,6 @@ done: } /** - * Send the VBLANK signals. - * - * \param dev DRM device. - * \param crtc CRTC where the vblank event occurred - * - * Sends a signal for each task in drm_device::vbl_sigs and empties the list. - * - * If a signal is not requested, then calls vblank_wait(). - */ -static void drm_vbl_send_signals(struct drm_device *dev, int crtc) -{ - struct drm_vbl_sig *vbl_sig, *tmp; - struct list_head *vbl_sigs; - unsigned int vbl_seq; - unsigned long flags; - - spin_lock_irqsave(&dev->vbl_lock, flags); - - vbl_sigs = &dev->vbl_sigs[crtc]; - vbl_seq = drm_vblank_count(dev, crtc); - - list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) { - if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) { - vbl_sig->info.si_code = vbl_seq; - send_sig_info(vbl_sig->info.si_signo, - &vbl_sig->info, vbl_sig->task); - - list_del(&vbl_sig->head); - - drm_free(vbl_sig, sizeof(*vbl_sig), - DRM_MEM_DRIVER); - atomic_dec(&dev->vbl_signal_pending); - drm_vblank_put(dev, crtc); - } - } - - spin_unlock_irqrestore(&dev->vbl_lock, flags); -} - -/** * drm_handle_vblank - handle a vblank event * @dev: DRM device * @crtc: where this event occurred @@ -739,6 +625,5 @@ void drm_handle_vblank(struct drm_device *dev, int crtc) { atomic_inc(&dev->_vblank_count[crtc]); DRM_WAKEUP(&dev->vbl_queue[crtc]); - drm_vbl_send_signals(dev, crtc); } EXPORT_SYMBOL(drm_handle_vblank); diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index a5a2f5339e9..5ee9d4c2575 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -137,10 +137,6 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, chan->reg = reg; snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name); chan->adapter.owner = THIS_MODULE; -#ifndef I2C_HW_B_INTELFB -#define I2C_HW_B_INTELFB I2C_HW_B_I810 -#endif - chan->adapter.id = I2C_HW_B_INTELFB; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &dev->pdev->dev; chan->algo.setsda = set_data; diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 6b1148fc2cb..b36a5214d8d 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -311,7 +311,7 @@ static int intel_lvds_get_modes(struct drm_connector *connector) if (dev_priv->panel_fixed_mode != NULL) { struct drm_display_mode *mode; - mutex_unlock(&dev->mode_config.mutex); + mutex_lock(&dev->mode_config.mutex); mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode); drm_mode_probed_add(connector, mode); mutex_unlock(&dev->mode_config.mutex); diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 5d7640e49dc..6cad69ed21c 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1218,6 +1218,7 @@ int hid_connect(struct hid_device *hdev, unsigned int connect_mask) } EXPORT_SYMBOL_GPL(hid_connect); +/* a list of devices for which there is a specialized driver on HID bus */ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) }, @@ -1476,6 +1477,7 @@ static struct bus_type hid_bus_type = { .uevent = hid_uevent, }; +/* a list of devices that shouldn't be handled by HID core at all */ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR) }, { HID_USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302) }, @@ -1606,6 +1608,8 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index acc1abc834a..e899f510ebe 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -362,6 +362,8 @@ #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD 0x0038 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2 0x0036 #define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3 0x0034 +#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD4 0x0044 +#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5 0x0045 #define USB_VENDOR_ID_SUN 0x0430 #define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c index d718b1607d0..25b10dcad90 100644 --- a/drivers/hid/hid-microsoft.c +++ b/drivers/hid/hid-microsoft.c @@ -30,7 +30,7 @@ #define MS_NOGET 0x10 /* - * Microsoft Wireless Desktop Receiver (Model 1028) has several + * Microsoft Wireless Desktop Receiver (Model 1028) has * 'Usage Min/Max' where it ought to have 'Physical Min/Max' */ static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, @@ -38,17 +38,12 @@ static void ms_report_fixup(struct hid_device *hdev, __u8 *rdesc, { unsigned long quirks = (unsigned long)hid_get_drvdata(hdev); - if ((quirks & MS_RDESC) && rsize == 571 && rdesc[284] == 0x19 && - rdesc[286] == 0x2a && rdesc[304] == 0x19 && - rdesc[306] == 0x29 && rdesc[352] == 0x1a && - rdesc[355] == 0x2a && rdesc[557] == 0x19 && + if ((quirks & MS_RDESC) && rsize == 571 && rdesc[557] == 0x19 && rdesc[559] == 0x29) { dev_info(&hdev->dev, "fixing up Microsoft Wireless Receiver " "Model 1028 report descriptor\n"); - rdesc[284] = rdesc[304] = rdesc[557] = 0x35; - rdesc[352] = 0x36; - rdesc[286] = rdesc[355] = 0x46; - rdesc[306] = rdesc[559] = 0x45; + rdesc[557] = 0x35; + rdesc[559] = 0x45; } } diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index d73eea382ab..4940e4d70c2 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -656,7 +656,7 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case HIDIOCGSTRING: mutex_lock(&hiddev->existancelock); - if (!hiddev->exist) + if (hiddev->exist) r = hiddev_ioctl_string(hiddev, cmd, user_arg); else r = -ENODEV; diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index e3018623658..678e34b01e5 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -83,7 +83,7 @@ /* * Temperature sensors keys (sp78 - 2 bytes). */ -static const char* temperature_sensors_sets[][36] = { +static const char *temperature_sensors_sets[][41] = { /* Set 0: Macbook Pro */ { "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H", "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL }, @@ -135,6 +135,13 @@ static const char* temperature_sensors_sets[][36] = { { "TB0T", "TB1S", "TB1T", "TB2S", "TB2T", "TC0D", "TN0D", "TTF0", "TV0P", "TVFP", "TW0P", "Th0P", "Tp0P", "Tp1P", "TpFP", "Ts0P", "Ts0S", NULL }, +/* Set 16: Mac Pro 3,1 (2 x Quad-Core) */ + { "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P", + "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "TH0P", "TH1P", + "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S", "TM1P", + "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S", + "TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S", + NULL }, }; /* List of keys used to read/write fan speeds */ @@ -1153,6 +1160,16 @@ static SENSOR_DEVICE_ATTR(temp34_input, S_IRUGO, applesmc_show_temperature, NULL, 33); static SENSOR_DEVICE_ATTR(temp35_input, S_IRUGO, applesmc_show_temperature, NULL, 34); +static SENSOR_DEVICE_ATTR(temp36_input, S_IRUGO, + applesmc_show_temperature, NULL, 35); +static SENSOR_DEVICE_ATTR(temp37_input, S_IRUGO, + applesmc_show_temperature, NULL, 36); +static SENSOR_DEVICE_ATTR(temp38_input, S_IRUGO, + applesmc_show_temperature, NULL, 37); +static SENSOR_DEVICE_ATTR(temp39_input, S_IRUGO, + applesmc_show_temperature, NULL, 38); +static SENSOR_DEVICE_ATTR(temp40_input, S_IRUGO, + applesmc_show_temperature, NULL, 39); static struct attribute *temperature_attributes[] = { &sensor_dev_attr_temp1_input.dev_attr.attr, @@ -1190,6 +1207,11 @@ static struct attribute *temperature_attributes[] = { &sensor_dev_attr_temp33_input.dev_attr.attr, &sensor_dev_attr_temp34_input.dev_attr.attr, &sensor_dev_attr_temp35_input.dev_attr.attr, + &sensor_dev_attr_temp36_input.dev_attr.attr, + &sensor_dev_attr_temp37_input.dev_attr.attr, + &sensor_dev_attr_temp38_input.dev_attr.attr, + &sensor_dev_attr_temp39_input.dev_attr.attr, + &sensor_dev_attr_temp40_input.dev_attr.attr, NULL }; @@ -1312,6 +1334,8 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 0, .light = 0, .temperature_set = 14 }, /* MacBook Air 2,1: accelerometer, backlight and temperature set 15 */ { .accelerometer = 1, .light = 1, .temperature_set = 15 }, +/* MacPro3,1: temperature set 16 */ + { .accelerometer = 0, .light = 0, .temperature_set = 16 }, }; /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". @@ -1369,6 +1393,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") }, &applesmc_dmi_data[4]}, + { applesmc_dmi_match, "Apple MacPro3", { + DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), + DMI_MATCH(DMI_PRODUCT_NAME, "MacPro3") }, + &applesmc_dmi_data[16]}, { applesmc_dmi_match, "Apple MacPro", { DMI_MATCH(DMI_BOARD_VENDOR, "Apple"), DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") }, diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c index 75089febbc1..9fee3ca1734 100644 --- a/drivers/i2c/busses/i2c-acorn.c +++ b/drivers/i2c/busses/i2c-acorn.c @@ -83,7 +83,6 @@ static struct i2c_algo_bit_data ioc_data = { }; static struct i2c_adapter ioc_ops = { - .id = I2C_HW_B_IOC, .algo_data = &ioc_data, }; diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 9cead9b9458..981e080b32a 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -476,7 +476,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter ali1535_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_ALI1535, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index dd9e796fad6..f70f46582c6 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -386,7 +386,6 @@ static const struct i2c_algorithm ali1563_algorithm = { static struct i2c_adapter ali1563_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_ALI1563, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &ali1563_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 234fdde7d40..39066dee46e 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -473,7 +473,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter ali15x3_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_ALI15X3, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 36bee5b9c95..220f4a1eee1 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -298,7 +298,6 @@ static const struct i2c_algorithm smbus_algorithm = { struct i2c_adapter amd756_smbus = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_AMD756, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 3972208876b..edab51973bf 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -387,7 +387,6 @@ static int __devinit amd8111_probe(struct pci_dev *dev, smbus->adapter.owner = THIS_MODULE; snprintf(smbus->adapter.name, sizeof(smbus->adapter.name), "SMBus2 AMD8111 adapter at %04x", smbus->base); - smbus->adapter.id = I2C_HW_SMBUS_AMD8111; smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c index 66a04c2c660..f78ce523e3d 100644 --- a/drivers/i2c/busses/i2c-au1550.c +++ b/drivers/i2c/busses/i2c-au1550.c @@ -400,7 +400,6 @@ i2c_au1550_probe(struct platform_device *pdev) priv->xfer_timeout = 200; priv->ack_timeout = 200; - priv->adap.id = I2C_HW_AU1550_PSC; priv->adap.nr = pdev->id; priv->adap.algo = &au1550_algo; priv->adap.algo_data = priv; diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index 3fd2c417c1e..fc548b3d002 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -651,7 +651,6 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) iface->timeout_timer.data = (unsigned long)iface; p_adap = &iface->adap; - p_adap->id = I2C_HW_BLACKFIN; p_adap->nr = pdev->id; strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name)); p_adap->algo = &bfin_twi_algorithm; diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 0ed3ccb81b6..448b4bf35eb 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -202,7 +202,6 @@ static struct i2c_algo_pcf_data pcf_isa_data = { static struct i2c_adapter pcf_isa_ops = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, - .id = I2C_HW_P_ELEK, .algo_data = &pcf_isa_data, .name = "i2c-elektor", }; diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index 648aa7baff8..bec9b845dd1 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -102,7 +102,6 @@ static struct i2c_algo_bit_data hydra_bit_data = { static struct i2c_adapter hydra_adap = { .owner = THIS_MODULE, .name = "Hydra i2c", - .id = I2C_HW_B_HYDRA, .algo_data = &hydra_bit_data, }; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 526625eaa84..230238df56c 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -556,7 +556,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter i801_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_I801, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 651f2f1ae5b..88f0db73b36 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -746,7 +746,6 @@ static int __devinit iic_probe(struct of_device *ofdev, adap->dev.parent = &ofdev->dev; strlcpy(adap->name, "IBM IIC", sizeof(adap->name)); i2c_set_adapdata(adap, dev); - adap->id = I2C_HW_OCP; adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adap->algo = &iic_algo; adap->timeout = 1; diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index fc2714ac0c0..3190690c26c 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -480,7 +480,6 @@ iop3xx_i2c_probe(struct platform_device *pdev) } memcpy(new_adapter->name, pdev->name, strlen(pdev->name)); - new_adapter->id = I2C_HW_IOP3XX; new_adapter->owner = THIS_MODULE; new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; new_adapter->dev.parent = &pdev->dev; diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index 05d72e98135..8e846797048 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -116,7 +116,6 @@ static int ixp2000_i2c_probe(struct platform_device *plat_dev) drv_data->algo_data.udelay = 6; drv_data->algo_data.timeout = 100; - drv_data->adapter.id = I2C_HW_B_IXP2000, strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name, sizeof(drv_data->adapter.name)); drv_data->adapter.algo_data = &drv_data->algo_data, diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index a9a45fcc854..aedbbe6618d 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -310,7 +310,6 @@ static const struct i2c_algorithm mpc_algo = { static struct i2c_adapter mpc_ops = { .owner = THIS_MODULE, .name = "MPC adapter", - .id = I2C_HW_MPC107, .algo = &mpc_algo, .timeout = 1, }; diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 9e8118d2fe6..eeda276f8f1 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -527,7 +527,6 @@ mv64xxx_i2c_probe(struct platform_device *pd) goto exit_unmap_regs; } drv_data->adapter.dev.parent = &pd->dev; - drv_data->adapter.id = I2C_HW_MV64XXX; drv_data->adapter.algo = &mv64xxx_i2c_algo; drv_data->adapter.owner = THIS_MODULE; drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 3b19bc41a60..05af6cd7f27 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -355,7 +355,6 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, return -EBUSY; } smbus->adapter.owner = THIS_MODULE; - smbus->adapter.id = I2C_HW_SMBUS_NFORCE2; smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c index b2b8380f660..322c5691e38 100644 --- a/drivers/i2c/busses/i2c-parport-light.c +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -115,7 +115,6 @@ static struct i2c_algo_bit_data parport_algo_data = { static struct i2c_adapter parport_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, - .id = I2C_HW_B_LP, .algo_data = &parport_algo_data, .name = "Parallel port adapter (light)", }; diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index a257cd5cd13..0d8998610c7 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -164,7 +164,6 @@ static void i2c_parport_attach (struct parport *port) /* Fill the rest of the structure */ adapter->adapter.owner = THIS_MODULE; adapter->adapter.class = I2C_CLASS_HWMON; - adapter->adapter.id = I2C_HW_B_LP; strlcpy(adapter->adapter.name, "Parallel port adapter", sizeof(adapter->adapter.name)); adapter->algo_data = parport_algo_data; diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index 9eb76268ec7..4aa8138cb0a 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -101,7 +101,6 @@ static struct i2c_algo_pca_data pca_isa_data = { static struct i2c_adapter pca_isa_ops = { .owner = THIS_MODULE, - .id = I2C_HW_A_ISA, .algo_data = &pca_isa_data, .name = "PCA9564 ISA Adapter", .timeout = 100, diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index eaa9b387543..761f9dd5362 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -403,7 +403,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter piix4_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_PIIX4, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c index 4ddefbf238e..98b1ec48915 100644 --- a/drivers/i2c/busses/i2c-sibyte.c +++ b/drivers/i2c/busses/i2c-sibyte.c @@ -155,7 +155,6 @@ static struct i2c_algo_sibyte_data sibyte_board_data[2] = { static struct i2c_adapter sibyte_board_adapter[2] = { { .owner = THIS_MODULE, - .id = I2C_HW_SIBYTE, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = NULL, .algo_data = &sibyte_board_data[0], @@ -164,7 +163,6 @@ static struct i2c_adapter sibyte_board_adapter[2] = { }, { .owner = THIS_MODULE, - .id = I2C_HW_SIBYTE, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = NULL, .algo_data = &sibyte_board_data[1], diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 8ce2daff985..f320ab27da4 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -365,7 +365,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis5595_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_SIS5595, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 9c9c016ff2b..50c3610e602 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -464,7 +464,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis630_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_SIS630, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index f1bba639664..7e1594b4057 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -241,7 +241,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis96x_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_SIS96X, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 29cef0433f3..8b24f192103 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -83,7 +83,6 @@ static struct i2c_algo_bit_data bit_data = { static struct i2c_adapter vt586b_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_B_VIA, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .name = "VIA i2c", .algo_data = &bit_data, diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 9f194d9efd9..02e6f724b05 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -321,7 +321,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter vt596_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_VIA2, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c index 1d4ae26ba73..1a474acc0dd 100644 --- a/drivers/i2c/busses/i2c-voodoo3.c +++ b/drivers/i2c/busses/i2c-voodoo3.c @@ -163,7 +163,6 @@ static struct i2c_algo_bit_data voo_i2c_bit_data = { static struct i2c_adapter voodoo3_i2c_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_B_VOO, .class = I2C_CLASS_TV_ANALOG, .name = "I2C Voodoo3/Banshee adapter", .algo_data = &voo_i2c_bit_data, @@ -180,7 +179,6 @@ static struct i2c_algo_bit_data voo_ddc_bit_data = { static struct i2c_adapter voodoo3_ddc_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_B_VOO, .class = I2C_CLASS_DDC, .name = "DDC Voodoo3/Banshee adapter", .algo_data = &voo_ddc_bit_data, diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index ed794b145a1..648ecc6f60e 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -440,7 +440,6 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text, i2c_set_adapdata(adapter, iface); snprintf(adapter->name, sizeof(adapter->name), "%s ACB%d", text, index); adapter->owner = THIS_MODULE; - adapter->id = I2C_HW_SMBUS_SCX200; adapter->algo = &scx200_acb_algorithm; adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adapter->dev.parent = dev; diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c index e4c98539c51..162b74a0488 100644 --- a/drivers/i2c/busses/scx200_i2c.c +++ b/drivers/i2c/busses/scx200_i2c.c @@ -82,7 +82,6 @@ static struct i2c_algo_bit_data scx200_i2c_data = { static struct i2c_adapter scx200_i2c_ops = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, - .id = I2C_HW_B_SCX200, .algo_data = &scx200_i2c_data, .name = "NatSemi SCx200 I2C", }; diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index b9bef04b7be..c80312c1f38 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -16,43 +16,6 @@ config DS1682 This driver can also be built as a module. If so, the module will be called ds1682. -config AT24 - tristate "EEPROMs from most vendors" - depends on SYSFS && EXPERIMENTAL - help - Enable this driver to get read/write support to most I2C EEPROMs, - after you configure the driver to know about each EEPROM on - your target board. Use these generic chip names, instead of - vendor-specific ones like at24c64 or 24lc02: - - 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08, - 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024 - - Unless you like data loss puzzles, always be sure that any chip - you configure as a 24c32 (32 kbit) or larger is NOT really a - 24c16 (16 kbit) or smaller, and vice versa. Marking the chip - as read-only won't help recover from this. Also, if your chip - has any software write-protect mechanism you may want to review the - code to make sure this driver won't turn it on by accident. - - If you use this with an SMBus adapter instead of an I2C adapter, - full functionality is not available. Only smaller devices are - supported (24c16 and below, max 4 kByte). - - This driver can also be built as a module. If so, the module - will be called at24. - -config SENSORS_EEPROM - tristate "EEPROM reader" - depends on EXPERIMENTAL - help - If you say yes here you get read-only access to the EEPROM data - available on modern memory DIMMs and Sony Vaio laptops. Such - EEPROMs could theoretically be available on other devices as well. - - This driver can also be built as a module. If so, the module - will be called eeprom. - config SENSORS_PCF8574 tristate "Philips PCF8574 and PCF8574A (DEPRECATED)" depends on EXPERIMENTAL && GPIO_PCF857X = "n" diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 00fcb5193ac..d142f238a2d 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -11,8 +11,6 @@ # obj-$(CONFIG_DS1682) += ds1682.o -obj-$(CONFIG_AT24) += at24.o -obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o obj-$(CONFIG_SENSORS_MAX6875) += max6875.o obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o diff --git a/drivers/ieee1394/ieee1394.h b/drivers/ieee1394/ieee1394.h index e0ae0d3d747..af320e2c507 100644 --- a/drivers/ieee1394/ieee1394.h +++ b/drivers/ieee1394/ieee1394.h @@ -54,9 +54,7 @@ #define IEEE1394_SPEED_800 0x03 #define IEEE1394_SPEED_1600 0x04 #define IEEE1394_SPEED_3200 0x05 - -/* The current highest tested speed supported by the subsystem */ -#define IEEE1394_SPEED_MAX IEEE1394_SPEED_800 +#define IEEE1394_SPEED_MAX IEEE1394_SPEED_3200 /* Maps speed values above to a string representation */ extern const char *hpsb_speedto_str[]; diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c index dcdb71a7718..2beb8d94f7b 100644 --- a/drivers/ieee1394/ieee1394_core.c +++ b/drivers/ieee1394/ieee1394_core.c @@ -338,6 +338,7 @@ static void build_speed_map(struct hpsb_host *host, int nodecount) u8 cldcnt[nodecount]; u8 *map = host->speed_map; u8 *speedcap = host->speed; + u8 local_link_speed = host->csr.lnk_spd; struct selfid *sid; struct ext_selfid *esid; int i, j, n; @@ -373,8 +374,8 @@ static void build_speed_map(struct hpsb_host *host, int nodecount) if (sid->port2 == SELFID_PORT_CHILD) cldcnt[n]++; speedcap[n] = sid->speed; - if (speedcap[n] > host->csr.lnk_spd) - speedcap[n] = host->csr.lnk_spd; + if (speedcap[n] > local_link_speed) + speedcap[n] = local_link_speed; n--; } } @@ -407,12 +408,11 @@ static void build_speed_map(struct hpsb_host *host, int nodecount) } } -#if SELFID_SPEED_UNKNOWN != IEEE1394_SPEED_MAX - /* assume maximum speed for 1394b PHYs, nodemgr will correct it */ - for (n = 0; n < nodecount; n++) - if (speedcap[n] == SELFID_SPEED_UNKNOWN) - speedcap[n] = IEEE1394_SPEED_MAX; -#endif + /* assume a maximum speed for 1394b PHYs, nodemgr will correct it */ + if (local_link_speed > SELFID_SPEED_UNKNOWN) + for (i = 0; i < nodecount; i++) + if (speedcap[i] == SELFID_SPEED_UNKNOWN) + speedcap[i] = local_link_speed; } diff --git a/drivers/ieee1394/ohci1394.h b/drivers/ieee1394/ohci1394.h index 4320bf01049..7fb8ab9780a 100644 --- a/drivers/ieee1394/ohci1394.h +++ b/drivers/ieee1394/ohci1394.h @@ -26,7 +26,7 @@ #define OHCI1394_DRIVER_NAME "ohci1394" -#define OHCI1394_MAX_AT_REQ_RETRIES 0x2 +#define OHCI1394_MAX_AT_REQ_RETRIES 0xf #define OHCI1394_MAX_AT_RESP_RETRIES 0x2 #define OHCI1394_MAX_PHYS_RESP_RETRIES 0x8 #define OHCI1394_MAX_SELF_ID_ERRORS 16 diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c index dc15cadb06e..38f71203620 100644 --- a/drivers/ieee1394/pcilynx.c +++ b/drivers/ieee1394/pcilynx.c @@ -1419,7 +1419,6 @@ static int __devinit add_card(struct pci_dev *dev, i2c_ad = kzalloc(sizeof(*i2c_ad), GFP_KERNEL); if (!i2c_ad) FAIL("failed to allocate I2C adapter memory"); - i2c_ad->id = I2C_HW_B_PCILYNX; strlcpy(i2c_ad->name, "PCILynx I2C", sizeof(i2c_ad->name)); i2c_adapter_data = bit_data; i2c_ad->algo_data = &i2c_adapter_data; diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index ab1034ccb7f..f3fd8657ce4 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -115,8 +115,8 @@ */ static int sbp2_max_speed = IEEE1394_SPEED_MAX; module_param_named(max_speed, sbp2_max_speed, int, 0644); -MODULE_PARM_DESC(max_speed, "Force max speed " - "(3 = 800Mb/s, 2 = 400Mb/s, 1 = 200Mb/s, 0 = 100Mb/s)"); +MODULE_PARM_DESC(max_speed, "Limit data transfer speed (5 <= 3200, " + "4 <= 1600, 3 <= 800, 2 <= 400, 1 <= 200, 0 = 100 Mb/s)"); /* * Set serialize_io to 0 or N to use dynamically appended lists of command ORBs. @@ -256,7 +256,7 @@ static int sbp2_set_busy_timeout(struct sbp2_lu *); static int sbp2_max_speed_and_size(struct sbp2_lu *); -static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xA, 0xB, 0xC }; +static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xa, 0xa, 0xa }; static DEFINE_RWLOCK(sbp2_hi_logical_units_lock); @@ -347,8 +347,8 @@ static struct scsi_host_template sbp2_shost_template = { .sdev_attrs = sbp2_sysfs_sdev_attrs, }; -/* for match-all entries in sbp2_workarounds_table */ -#define SBP2_ROM_VALUE_WILDCARD 0x1000000 +#define SBP2_ROM_VALUE_WILDCARD ~0 /* match all */ +#define SBP2_ROM_VALUE_MISSING 0xff000000 /* not present in the unit dir. */ /* * List of devices with known bugs. @@ -359,60 +359,70 @@ static struct scsi_host_template sbp2_shost_template = { */ static const struct { u32 firmware_revision; - u32 model_id; + u32 model; unsigned workarounds; } sbp2_workarounds_table[] = { /* DViCO Momobay CX-1 with TSB42AA9 bridge */ { .firmware_revision = 0x002800, - .model_id = 0x001010, + .model = 0x001010, .workarounds = SBP2_WORKAROUND_INQUIRY_36 | SBP2_WORKAROUND_MODE_SENSE_8 | SBP2_WORKAROUND_POWER_CONDITION, }, /* DViCO Momobay FX-3A with TSB42AA9A bridge */ { .firmware_revision = 0x002800, - .model_id = 0x000000, + .model = 0x000000, .workarounds = SBP2_WORKAROUND_DELAY_INQUIRY | SBP2_WORKAROUND_POWER_CONDITION, }, /* Initio bridges, actually only needed for some older ones */ { .firmware_revision = 0x000200, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_INQUIRY_36, }, /* PL-3507 bridge with Prolific firmware */ { .firmware_revision = 0x012800, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_POWER_CONDITION, }, /* Symbios bridge */ { .firmware_revision = 0xa0b800, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, /* Datafab MD2-FW2 with Symbios/LSILogic SYM13FW500 bridge */ { .firmware_revision = 0x002600, - .model_id = SBP2_ROM_VALUE_WILDCARD, + .model = SBP2_ROM_VALUE_WILDCARD, .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS, }, + /* + * iPod 2nd generation: needs 128k max transfer size workaround + * iPod 3rd generation: needs fix capacity workaround + */ + { + .firmware_revision = 0x0a2700, + .model = 0x000000, + .workarounds = SBP2_WORKAROUND_128K_MAX_TRANS | + SBP2_WORKAROUND_FIX_CAPACITY, + }, /* iPod 4th generation */ { .firmware_revision = 0x0a2700, - .model_id = 0x000021, + .model = 0x000021, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, /* iPod mini */ { .firmware_revision = 0x0a2700, - .model_id = 0x000022, + .model = 0x000022, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, /* iPod mini */ { .firmware_revision = 0x0a2700, - .model_id = 0x000023, + .model = 0x000023, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, }, /* iPod Photo */ { .firmware_revision = 0x0a2700, - .model_id = 0x00007e, + .model = 0x00007e, .workarounds = SBP2_WORKAROUND_FIX_CAPACITY, } }; @@ -1341,13 +1351,15 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu, struct csr1212_keyval *kv; struct csr1212_dentry *dentry; u64 management_agent_addr; - u32 unit_characteristics, firmware_revision; + u32 unit_characteristics, firmware_revision, model; unsigned workarounds; int i; management_agent_addr = 0; unit_characteristics = 0; - firmware_revision = 0; + firmware_revision = SBP2_ROM_VALUE_MISSING; + model = ud->flags & UNIT_DIRECTORY_MODEL_ID ? + ud->model_id : SBP2_ROM_VALUE_MISSING; csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) { switch (kv->key.id) { @@ -1388,9 +1400,9 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu, sbp2_workarounds_table[i].firmware_revision != (firmware_revision & 0xffff00)) continue; - if (sbp2_workarounds_table[i].model_id != + if (sbp2_workarounds_table[i].model != SBP2_ROM_VALUE_WILDCARD && - sbp2_workarounds_table[i].model_id != ud->model_id) + sbp2_workarounds_table[i].model != model) continue; workarounds |= sbp2_workarounds_table[i].workarounds; break; @@ -1403,7 +1415,7 @@ static void sbp2_parse_unit_directory(struct sbp2_lu *lu, NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid), workarounds, firmware_revision, ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id, - ud->model_id); + model); /* We would need one SCSI host template for each target to adjust * max_sectors on the fly, therefore warn only. */ diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c index a3551dd0324..aa30b5cb351 100644 --- a/drivers/isdn/i4l/isdn_ppp.c +++ b/drivers/isdn/i4l/isdn_ppp.c @@ -431,6 +431,7 @@ set_arg(void __user *b, void *val,int len) return 0; } +#ifdef CONFIG_IPPP_FILTER static int get_filter(void __user *arg, struct sock_filter **p) { struct sock_fprog uprog; @@ -465,6 +466,7 @@ static int get_filter(void __user *arg, struct sock_filter **p) *p = code; return uprog.len; } +#endif /* CONFIG_IPPP_FILTER */ /* * ippp device ioctl diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c index 90663e01a56..60156dfdc60 100644 --- a/drivers/lguest/core.c +++ b/drivers/lguest/core.c @@ -224,7 +224,7 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user) break; /* If the Guest asked to be stopped, we sleep. The Guest's - * clock timer or LHCALL_BREAK from the Waker will wake us. */ + * clock timer or LHREQ_BREAK from the Waker will wake us. */ if (cpu->halted) { set_current_state(TASK_INTERRUPTIBLE); schedule(); diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c index 34bc017b8b3..b8ee103eed5 100644 --- a/drivers/lguest/lguest_user.c +++ b/drivers/lguest/lguest_user.c @@ -307,9 +307,8 @@ static int close(struct inode *inode, struct file *file) * kmalloc()ed string, either of which is ok to hand to kfree(). */ if (!IS_ERR(lg->dead)) kfree(lg->dead); - /* We clear the entire structure, which also marks it as free for the - * next user. */ - memset(lg, 0, sizeof(*lg)); + /* Free the memory allocated to the lguest_struct */ + kfree(lg); /* Release lock and exit. */ mutex_unlock(&lguest_lock); diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 419c378bd24..56073199ceb 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -87,14 +87,6 @@ config PHANTOM If you choose to build module, its name will be phantom. If unsure, say N here. -config EEPROM_93CX6 - tristate "EEPROM 93CX6 support" - ---help--- - This is a driver for the EEPROM chipsets 93c46 and 93c66. - The driver supports both read as well as write commands. - - If unsure, say N. - config SGI_IOC4 tristate "SGI IOC4 Base IO support" depends on PCI @@ -231,5 +223,6 @@ config DELL_LAPTOP laptops. source "drivers/misc/c2port/Kconfig" +source "drivers/misc/eeprom/Kconfig" endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index d5749a7bc77..bc119983055 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -13,10 +13,10 @@ obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o obj-$(CONFIG_SGI_IOC4) += ioc4.o -obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_HP_ILO) += hpilo.o obj-$(CONFIG_C2PORT) += c2port/ +obj-y += eeprom/ diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig new file mode 100644 index 00000000000..c76df8cda5e --- /dev/null +++ b/drivers/misc/eeprom/Kconfig @@ -0,0 +1,59 @@ +menu "EEPROM support" + +config EEPROM_AT24 + tristate "I2C EEPROMs from most vendors" + depends on I2C && SYSFS && EXPERIMENTAL + help + Enable this driver to get read/write support to most I2C EEPROMs, + after you configure the driver to know about each EEPROM on + your target board. Use these generic chip names, instead of + vendor-specific ones like at24c64 or 24lc02: + + 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08, + 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024 + + Unless you like data loss puzzles, always be sure that any chip + you configure as a 24c32 (32 kbit) or larger is NOT really a + 24c16 (16 kbit) or smaller, and vice versa. Marking the chip + as read-only won't help recover from this. Also, if your chip + has any software write-protect mechanism you may want to review the + code to make sure this driver won't turn it on by accident. + + If you use this with an SMBus adapter instead of an I2C adapter, + full functionality is not available. Only smaller devices are + supported (24c16 and below, max 4 kByte). + + This driver can also be built as a module. If so, the module + will be called at24. + +config EEPROM_AT25 + tristate "SPI EEPROMs from most vendors" + depends on SPI && SYSFS + help + Enable this driver to get read/write support to most SPI EEPROMs, + after you configure the board init code to know about each eeprom + on your target board. + + This driver can also be built as a module. If so, the module + will be called at25. + +config EEPROM_LEGACY + tristate "Old I2C EEPROM reader" + depends on I2C && SYSFS + help + If you say yes here you get read-only access to the EEPROM data + available on modern memory DIMMs and Sony Vaio laptops via I2C. Such + EEPROMs could theoretically be available on other devices as well. + + This driver can also be built as a module. If so, the module + will be called eeprom. + +config EEPROM_93CX6 + tristate "EEPROM 93CX6 support" + help + This is a driver for the EEPROM chipsets 93c46 and 93c66. + The driver supports both read as well as write commands. + + If unsure, say N. + +endmenu diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile new file mode 100644 index 00000000000..539dd8f8812 --- /dev/null +++ b/drivers/misc/eeprom/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_EEPROM_AT24) += at24.o +obj-$(CONFIG_EEPROM_AT25) += at25.o +obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o +obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o diff --git a/drivers/i2c/chips/at24.c b/drivers/misc/eeprom/at24.c index d4775528abc..d4775528abc 100644 --- a/drivers/i2c/chips/at24.c +++ b/drivers/misc/eeprom/at24.c diff --git a/drivers/spi/at25.c b/drivers/misc/eeprom/at25.c index 290dbe99647..290dbe99647 100644 --- a/drivers/spi/at25.c +++ b/drivers/misc/eeprom/at25.c diff --git a/drivers/i2c/chips/eeprom.c b/drivers/misc/eeprom/eeprom.c index 2c27193aeaa..2c27193aeaa 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/misc/eeprom/eeprom.c diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c index 15b1780025c..15b1780025c 100644 --- a/drivers/misc/eeprom_93cx6.c +++ b/drivers/misc/eeprom/eeprom_93cx6.c diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c index 05e29828923..10c421b73ea 100644 --- a/drivers/misc/hpilo.c +++ b/drivers/misc/hpilo.c @@ -758,7 +758,7 @@ static void __exit ilo_exit(void) class_destroy(ilo_class); } -MODULE_VERSION("0.05"); +MODULE_VERSION("0.06"); MODULE_ALIAS(ILO_NAME); MODULE_DESCRIPTION(ILO_NAME); MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>"); diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c index 9cd2ebe2a3b..45fd653dbe3 100644 --- a/drivers/misc/sgi-xp/xpc_channel.c +++ b/drivers/misc/sgi-xp/xpc_channel.c @@ -49,9 +49,6 @@ xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags) if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING)) return; - - DBUG_ON(ch->local_msgqueue == NULL); - DBUG_ON(ch->remote_msgqueue == NULL); } if (!(ch->flags & XPC_C_OPENREPLY)) { diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c index 82fb9958f22..2e975762c32 100644 --- a/drivers/misc/sgi-xp/xpc_sn2.c +++ b/drivers/misc/sgi-xp/xpc_sn2.c @@ -1106,8 +1106,6 @@ xpc_process_activate_IRQ_rcvd_sn2(void) int n_IRQs_expected; int n_IRQs_detected; - DBUG_ON(xpc_activate_IRQ_rcvd == 0); - spin_lock_irqsave(&xpc_activate_IRQ_rcvd_lock, irq_flags); n_IRQs_expected = xpc_activate_IRQ_rcvd; xpc_activate_IRQ_rcvd = 0; @@ -1726,6 +1724,7 @@ xpc_clear_local_msgqueue_flags_sn2(struct xpc_channel *ch) msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->local_msgqueue + (get % ch->local_nentries) * ch->entry_size); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); msg->flags = 0; } while (++get < ch_sn2->remote_GP.get); } @@ -1740,11 +1739,18 @@ xpc_clear_remote_msgqueue_flags_sn2(struct xpc_channel *ch) struct xpc_msg_sn2 *msg; s64 put; - put = ch_sn2->w_remote_GP.put; + /* flags are zeroed when the buffer is allocated */ + if (ch_sn2->remote_GP.put < ch->remote_nentries) + return; + + put = max(ch_sn2->w_remote_GP.put, ch->remote_nentries); do { msg = (struct xpc_msg_sn2 *)((u64)ch_sn2->remote_msgqueue + (put % ch->remote_nentries) * ch->entry_size); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); + DBUG_ON(!(msg->flags & XPC_M_SN2_DONE)); + DBUG_ON(msg->number != put - ch->remote_nentries); msg->flags = 0; } while (++put < ch_sn2->remote_GP.put); } @@ -1836,6 +1842,7 @@ xpc_process_msg_chctl_flags_sn2(struct xpc_partition *part, int ch_number) */ xpc_clear_remote_msgqueue_flags_sn2(ch); + smp_wmb(); /* ensure flags have been cleared before bte_copy */ ch_sn2->w_remote_GP.put = ch_sn2->remote_GP.put; dev_dbg(xpc_chan, "w_remote_GP.put changed to %ld, partid=%d, " @@ -1934,7 +1941,7 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch) break; get = ch_sn2->w_local_GP.get; - rmb(); /* guarantee that .get loads before .put */ + smp_rmb(); /* guarantee that .get loads before .put */ if (get == ch_sn2->w_remote_GP.put) break; @@ -1956,11 +1963,13 @@ xpc_get_deliverable_payload_sn2(struct xpc_channel *ch) msg = xpc_pull_remote_msg_sn2(ch, get); - DBUG_ON(msg != NULL && msg->number != get); - DBUG_ON(msg != NULL && (msg->flags & XPC_M_SN2_DONE)); - DBUG_ON(msg != NULL && !(msg->flags & XPC_M_SN2_READY)); + if (msg != NULL) { + DBUG_ON(msg->number != get); + DBUG_ON(msg->flags & XPC_M_SN2_DONE); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); - payload = &msg->payload; + payload = &msg->payload; + } break; } @@ -2053,7 +2062,7 @@ xpc_allocate_msg_sn2(struct xpc_channel *ch, u32 flags, while (1) { put = ch_sn2->w_local_GP.put; - rmb(); /* guarantee that .put loads before .get */ + smp_rmb(); /* guarantee that .put loads before .get */ if (put - ch_sn2->w_remote_GP.get < ch->local_nentries) { /* There are available message entries. We need to try @@ -2186,7 +2195,7 @@ xpc_send_payload_sn2(struct xpc_channel *ch, u32 flags, void *payload, * The preceding store of msg->flags must occur before the following * load of local_GP->put. */ - mb(); + smp_mb(); /* see if the message is next in line to be sent, if so send it */ @@ -2277,8 +2286,9 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload) dev_dbg(xpc_chan, "msg=0x%p, msg_number=%ld, partid=%d, channel=%d\n", (void *)msg, msg_number, ch->partid, ch->number); - DBUG_ON((((u64)msg - (u64)ch->remote_msgqueue) / ch->entry_size) != + DBUG_ON((((u64)msg - (u64)ch->sn.sn2.remote_msgqueue) / ch->entry_size) != msg_number % ch->remote_nentries); + DBUG_ON(!(msg->flags & XPC_M_SN2_READY)); DBUG_ON(msg->flags & XPC_M_SN2_DONE); msg->flags |= XPC_M_SN2_DONE; @@ -2287,7 +2297,7 @@ xpc_received_payload_sn2(struct xpc_channel *ch, void *payload) * The preceding store of msg->flags must occur before the following * load of local_GP->get. */ - mb(); + smp_mb(); /* * See if this message is next in line to be acknowledged as having diff --git a/drivers/misc/sgi-xp/xpc_uv.c b/drivers/misc/sgi-xp/xpc_uv.c index 91a55b1b103..f17f7d40ea2 100644 --- a/drivers/misc/sgi-xp/xpc_uv.c +++ b/drivers/misc/sgi-xp/xpc_uv.c @@ -1423,7 +1423,7 @@ xpc_send_payload_uv(struct xpc_channel *ch, u32 flags, void *payload, atomic_inc(&ch->n_to_notify); msg_slot->key = key; - wmb(); /* a non-NULL func must hit memory after the key */ + smp_wmb(); /* a non-NULL func must hit memory after the key */ msg_slot->func = func; if (ch->flags & XPC_C_DISCONNECTING) { diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index dfa585f7fea..0efa390978b 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -76,6 +76,16 @@ config MMC_OMAP If unsure, say N. +config MMC_OMAP_HS + tristate "TI OMAP High Speed Multimedia Card Interface support" + depends on ARCH_OMAP2430 || ARCH_OMAP3 + help + This selects the TI OMAP High Speed Multimedia card Interface. + If you have an OMAP2430 or OMAP3 board with a Multimedia Card slot, + say Y or M here. + + If unsure, say N. + config MMC_WBSD tristate "Winbond W83L51xD SD/MMC Card Interface support" depends on ISA_DMA_API diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index f4853288bbb..98cab84829b 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_OMAP) += omap.o +obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o obj-$(CONFIG_MMC_AT91) += at91_mci.o obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c new file mode 100644 index 00000000000..db37490f67e --- /dev/null +++ b/drivers/mmc/host/omap_hsmmc.c @@ -0,0 +1,1242 @@ +/* + * drivers/mmc/host/omap_hsmmc.c + * + * Driver for OMAP2430/3430 MMC controller. + * + * Copyright (C) 2007 Texas Instruments. + * + * Authors: + * Syed Mohammed Khasim <x0khasim@ti.com> + * Madhusudhan <madhu.cr@ti.com> + * Mohit Jalori <mjalori@ti.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/timer.h> +#include <linux/clk.h> +#include <linux/mmc/host.h> +#include <linux/io.h> +#include <linux/semaphore.h> +#include <mach/dma.h> +#include <mach/hardware.h> +#include <mach/board.h> +#include <mach/mmc.h> +#include <mach/cpu.h> + +/* OMAP HSMMC Host Controller Registers */ +#define OMAP_HSMMC_SYSCONFIG 0x0010 +#define OMAP_HSMMC_CON 0x002C +#define OMAP_HSMMC_BLK 0x0104 +#define OMAP_HSMMC_ARG 0x0108 +#define OMAP_HSMMC_CMD 0x010C +#define OMAP_HSMMC_RSP10 0x0110 +#define OMAP_HSMMC_RSP32 0x0114 +#define OMAP_HSMMC_RSP54 0x0118 +#define OMAP_HSMMC_RSP76 0x011C +#define OMAP_HSMMC_DATA 0x0120 +#define OMAP_HSMMC_HCTL 0x0128 +#define OMAP_HSMMC_SYSCTL 0x012C +#define OMAP_HSMMC_STAT 0x0130 +#define OMAP_HSMMC_IE 0x0134 +#define OMAP_HSMMC_ISE 0x0138 +#define OMAP_HSMMC_CAPA 0x0140 + +#define VS18 (1 << 26) +#define VS30 (1 << 25) +#define SDVS18 (0x5 << 9) +#define SDVS30 (0x6 << 9) +#define SDVSCLR 0xFFFFF1FF +#define SDVSDET 0x00000400 +#define AUTOIDLE 0x1 +#define SDBP (1 << 8) +#define DTO 0xe +#define ICE 0x1 +#define ICS 0x2 +#define CEN (1 << 2) +#define CLKD_MASK 0x0000FFC0 +#define CLKD_SHIFT 6 +#define DTO_MASK 0x000F0000 +#define DTO_SHIFT 16 +#define INT_EN_MASK 0x307F0033 +#define INIT_STREAM (1 << 1) +#define DP_SELECT (1 << 21) +#define DDIR (1 << 4) +#define DMA_EN 0x1 +#define MSBS (1 << 5) +#define BCE (1 << 1) +#define FOUR_BIT (1 << 1) +#define CC 0x1 +#define TC 0x02 +#define OD 0x1 +#define ERR (1 << 15) +#define CMD_TIMEOUT (1 << 16) +#define DATA_TIMEOUT (1 << 20) +#define CMD_CRC (1 << 17) +#define DATA_CRC (1 << 21) +#define CARD_ERR (1 << 28) +#define STAT_CLEAR 0xFFFFFFFF +#define INIT_STREAM_CMD 0x00000000 +#define DUAL_VOLT_OCR_BIT 7 +#define SRC (1 << 25) +#define SRD (1 << 26) + +/* + * FIXME: Most likely all the data using these _DEVID defines should come + * from the platform_data, or implemented in controller and slot specific + * functions. + */ +#define OMAP_MMC1_DEVID 0 +#define OMAP_MMC2_DEVID 1 + +#define OMAP_MMC_DATADIR_NONE 0 +#define OMAP_MMC_DATADIR_READ 1 +#define OMAP_MMC_DATADIR_WRITE 2 +#define MMC_TIMEOUT_MS 20 +#define OMAP_MMC_MASTER_CLOCK 96000000 +#define DRIVER_NAME "mmci-omap-hs" + +/* + * One controller can have multiple slots, like on some omap boards using + * omap.c controller driver. Luckily this is not currently done on any known + * omap_hsmmc.c device. + */ +#define mmc_slot(host) (host->pdata->slots[host->slot_id]) + +/* + * MMC Host controller read/write API's + */ +#define OMAP_HSMMC_READ(base, reg) \ + __raw_readl((base) + OMAP_HSMMC_##reg) + +#define OMAP_HSMMC_WRITE(base, reg, val) \ + __raw_writel((val), (base) + OMAP_HSMMC_##reg) + +struct mmc_omap_host { + struct device *dev; + struct mmc_host *mmc; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + struct clk *fclk; + struct clk *iclk; + struct clk *dbclk; + struct semaphore sem; + struct work_struct mmc_carddetect_work; + void __iomem *base; + resource_size_t mapbase; + unsigned int id; + unsigned int dma_len; + unsigned int dma_dir; + unsigned char bus_mode; + unsigned char datadir; + u32 *buffer; + u32 bytesleft; + int suspended; + int irq; + int carddetect; + int use_dma, dma_ch; + int initstr; + int slot_id; + int dbclk_enabled; + struct omap_mmc_platform_data *pdata; +}; + +/* + * Stop clock to the card + */ +static void omap_mmc_stop_clock(struct mmc_omap_host *host) +{ + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN); + if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0) + dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n"); +} + +/* + * Send init stream sequence to card + * before sending IDLE command + */ +static void send_init_stream(struct mmc_omap_host *host) +{ + int reg = 0; + unsigned long timeout; + + disable_irq(host->irq); + OMAP_HSMMC_WRITE(host->base, CON, + OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM); + OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD); + + timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); + while ((reg != CC) && time_before(jiffies, timeout)) + reg = OMAP_HSMMC_READ(host->base, STAT) & CC; + + OMAP_HSMMC_WRITE(host->base, CON, + OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM); + enable_irq(host->irq); +} + +static inline +int mmc_omap_cover_is_closed(struct mmc_omap_host *host) +{ + int r = 1; + + if (host->pdata->slots[host->slot_id].get_cover_state) + r = host->pdata->slots[host->slot_id].get_cover_state(host->dev, + host->slot_id); + return r; +} + +static ssize_t +mmc_omap_show_cover_switch(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev); + struct mmc_omap_host *host = mmc_priv(mmc); + + return sprintf(buf, "%s\n", mmc_omap_cover_is_closed(host) ? "closed" : + "open"); +} + +static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL); + +static ssize_t +mmc_omap_show_slot_name(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev); + struct mmc_omap_host *host = mmc_priv(mmc); + struct omap_mmc_slot_data slot = host->pdata->slots[host->slot_id]; + + return sprintf(buf, "slot:%s\n", slot.name); +} + +static DEVICE_ATTR(slot_name, S_IRUGO, mmc_omap_show_slot_name, NULL); + +/* + * Configure the response type and send the cmd. + */ +static void +mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd, + struct mmc_data *data) +{ + int cmdreg = 0, resptype = 0, cmdtype = 0; + + dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n", + mmc_hostname(host->mmc), cmd->opcode, cmd->arg); + host->cmd = cmd; + + /* + * Clear status bits and enable interrupts + */ + OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); + OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK); + OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK); + + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) + resptype = 1; + else + resptype = 2; + } + + /* + * Unlike OMAP1 controller, the cmdtype does not seem to be based on + * ac, bc, adtc, bcr. Only commands ending an open ended transfer need + * a val of 0x3, rest 0x0. + */ + if (cmd == host->mrq->stop) + cmdtype = 0x3; + + cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22); + + if (data) { + cmdreg |= DP_SELECT | MSBS | BCE; + if (data->flags & MMC_DATA_READ) + cmdreg |= DDIR; + else + cmdreg &= ~(DDIR); + } + + if (host->use_dma) + cmdreg |= DMA_EN; + + OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg); + OMAP_HSMMC_WRITE(host->base, CMD, cmdreg); +} + +/* + * Notify the transfer complete to MMC core + */ +static void +mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data) +{ + host->data = NULL; + + if (host->use_dma && host->dma_ch != -1) + dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len, + host->dma_dir); + + host->datadir = OMAP_MMC_DATADIR_NONE; + + if (!data->error) + data->bytes_xfered += data->blocks * (data->blksz); + else + data->bytes_xfered = 0; + + if (!data->stop) { + host->mrq = NULL; + mmc_request_done(host->mmc, data->mrq); + return; + } + mmc_omap_start_command(host, data->stop, NULL); +} + +/* + * Notify the core about command completion + */ +static void +mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd) +{ + host->cmd = NULL; + + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + /* response type 2 */ + cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10); + cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32); + cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54); + cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76); + } else { + /* response types 1, 1b, 3, 4, 5, 6 */ + cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10); + } + } + if (host->data == NULL || cmd->error) { + host->mrq = NULL; + mmc_request_done(host->mmc, cmd->mrq); + } +} + +/* + * DMA clean up for command errors + */ +static void mmc_dma_cleanup(struct mmc_omap_host *host) +{ + host->data->error = -ETIMEDOUT; + + if (host->use_dma && host->dma_ch != -1) { + dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len, + host->dma_dir); + omap_free_dma(host->dma_ch); + host->dma_ch = -1; + up(&host->sem); + } + host->data = NULL; + host->datadir = OMAP_MMC_DATADIR_NONE; +} + +/* + * Readable error output + */ +#ifdef CONFIG_MMC_DEBUG +static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status) +{ + /* --- means reserved bit without definition at documentation */ + static const char *mmc_omap_status_bits[] = { + "CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ", + "OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC", + "CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---", + "---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---" + }; + char res[256]; + char *buf = res; + int len, i; + + len = sprintf(buf, "MMC IRQ 0x%x :", status); + buf += len; + + for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++) + if (status & (1 << i)) { + len = sprintf(buf, " %s", mmc_omap_status_bits[i]); + buf += len; + } + + dev_dbg(mmc_dev(host->mmc), "%s\n", res); +} +#endif /* CONFIG_MMC_DEBUG */ + + +/* + * MMC controller IRQ handler + */ +static irqreturn_t mmc_omap_irq(int irq, void *dev_id) +{ + struct mmc_omap_host *host = dev_id; + struct mmc_data *data; + int end_cmd = 0, end_trans = 0, status; + + if (host->cmd == NULL && host->data == NULL) { + OMAP_HSMMC_WRITE(host->base, STAT, + OMAP_HSMMC_READ(host->base, STAT)); + return IRQ_HANDLED; + } + + data = host->data; + status = OMAP_HSMMC_READ(host->base, STAT); + dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status); + + if (status & ERR) { +#ifdef CONFIG_MMC_DEBUG + mmc_omap_report_irq(host, status); +#endif + if ((status & CMD_TIMEOUT) || + (status & CMD_CRC)) { + if (host->cmd) { + if (status & CMD_TIMEOUT) { + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, + SYSCTL) | SRC); + while (OMAP_HSMMC_READ(host->base, + SYSCTL) & SRC) + ; + + host->cmd->error = -ETIMEDOUT; + } else { + host->cmd->error = -EILSEQ; + } + end_cmd = 1; + } + if (host->data) + mmc_dma_cleanup(host); + } + if ((status & DATA_TIMEOUT) || + (status & DATA_CRC)) { + if (host->data) { + if (status & DATA_TIMEOUT) + mmc_dma_cleanup(host); + else + host->data->error = -EILSEQ; + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, + SYSCTL) | SRD); + while (OMAP_HSMMC_READ(host->base, + SYSCTL) & SRD) + ; + end_trans = 1; + } + } + if (status & CARD_ERR) { + dev_dbg(mmc_dev(host->mmc), + "Ignoring card err CMD%d\n", host->cmd->opcode); + if (host->cmd) + end_cmd = 1; + if (host->data) + end_trans = 1; + } + } + + OMAP_HSMMC_WRITE(host->base, STAT, status); + + if (end_cmd || (status & CC)) + mmc_omap_cmd_done(host, host->cmd); + if (end_trans || (status & TC)) + mmc_omap_xfer_done(host, data); + + return IRQ_HANDLED; +} + +/* + * Switch MMC operating voltage + */ +static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd) +{ + u32 reg_val = 0; + int ret; + + /* Disable the clocks */ + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_disable(host->dbclk); + + /* Turn the power off */ + ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); + if (ret != 0) + goto err; + + /* Turn the power ON with given VDD 1.8 or 3.0v */ + ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd); + if (ret != 0) + goto err; + + clk_enable(host->fclk); + clk_enable(host->iclk); + clk_enable(host->dbclk); + + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR); + reg_val = OMAP_HSMMC_READ(host->base, HCTL); + /* + * If a MMC dual voltage card is detected, the set_ios fn calls + * this fn with VDD bit set for 1.8V. Upon card removal from the + * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF. + * + * Only MMC1 supports 3.0V. MMC2 will not function if SDVS30 is + * set in HCTL. + */ + if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) || + ((1 << vdd) == MMC_VDD_33_34))) + reg_val |= SDVS30; + if ((1 << vdd) == MMC_VDD_165_195) + reg_val |= SDVS18; + + OMAP_HSMMC_WRITE(host->base, HCTL, reg_val); + + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | SDBP); + + return 0; +err: + dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n"); + return ret; +} + +/* + * Work Item to notify the core about card insertion/removal + */ +static void mmc_omap_detect(struct work_struct *work) +{ + struct mmc_omap_host *host = container_of(work, struct mmc_omap_host, + mmc_carddetect_work); + + sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch"); + if (host->carddetect) { + mmc_detect_change(host->mmc, (HZ * 200) / 1000); + } else { + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | SRD); + while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD) + ; + + mmc_detect_change(host->mmc, (HZ * 50) / 1000); + } +} + +/* + * ISR for handling card insertion and removal + */ +static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id) +{ + struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id; + + host->carddetect = mmc_slot(host).card_detect(irq); + schedule_work(&host->mmc_carddetect_work); + + return IRQ_HANDLED; +} + +/* + * DMA call back function + */ +static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data) +{ + struct mmc_omap_host *host = data; + + if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ) + dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n"); + + if (host->dma_ch < 0) + return; + + omap_free_dma(host->dma_ch); + host->dma_ch = -1; + /* + * DMA Callback: run in interrupt context. + * mutex_unlock will through a kernel warning if used. + */ + up(&host->sem); +} + +/* + * Configure dma src and destination parameters + */ +static int mmc_omap_config_dma_param(int sync_dir, struct mmc_omap_host *host, + struct mmc_data *data) +{ + if (sync_dir == 0) { + omap_set_dma_dest_params(host->dma_ch, 0, + OMAP_DMA_AMODE_CONSTANT, + (host->mapbase + OMAP_HSMMC_DATA), 0, 0); + omap_set_dma_src_params(host->dma_ch, 0, + OMAP_DMA_AMODE_POST_INC, + sg_dma_address(&data->sg[0]), 0, 0); + } else { + omap_set_dma_src_params(host->dma_ch, 0, + OMAP_DMA_AMODE_CONSTANT, + (host->mapbase + OMAP_HSMMC_DATA), 0, 0); + omap_set_dma_dest_params(host->dma_ch, 0, + OMAP_DMA_AMODE_POST_INC, + sg_dma_address(&data->sg[0]), 0, 0); + } + return 0; +} +/* + * Routine to configure and start DMA for the MMC card + */ +static int +mmc_omap_start_dma_transfer(struct mmc_omap_host *host, struct mmc_request *req) +{ + int sync_dev, sync_dir = 0; + int dma_ch = 0, ret = 0, err = 1; + struct mmc_data *data = req->data; + + /* + * If for some reason the DMA transfer is still active, + * we wait for timeout period and free the dma + */ + if (host->dma_ch != -1) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(100); + if (down_trylock(&host->sem)) { + omap_free_dma(host->dma_ch); + host->dma_ch = -1; + up(&host->sem); + return err; + } + } else { + if (down_trylock(&host->sem)) + return err; + } + + if (!(data->flags & MMC_DATA_WRITE)) { + host->dma_dir = DMA_FROM_DEVICE; + if (host->id == OMAP_MMC1_DEVID) + sync_dev = OMAP24XX_DMA_MMC1_RX; + else + sync_dev = OMAP24XX_DMA_MMC2_RX; + } else { + host->dma_dir = DMA_TO_DEVICE; + if (host->id == OMAP_MMC1_DEVID) + sync_dev = OMAP24XX_DMA_MMC1_TX; + else + sync_dev = OMAP24XX_DMA_MMC2_TX; + } + + ret = omap_request_dma(sync_dev, "MMC/SD", mmc_omap_dma_cb, + host, &dma_ch); + if (ret != 0) { + dev_dbg(mmc_dev(host->mmc), + "%s: omap_request_dma() failed with %d\n", + mmc_hostname(host->mmc), ret); + return ret; + } + + host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, host->dma_dir); + host->dma_ch = dma_ch; + + if (!(data->flags & MMC_DATA_WRITE)) + mmc_omap_config_dma_param(1, host, data); + else + mmc_omap_config_dma_param(0, host, data); + + if ((data->blksz % 4) == 0) + omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32, + (data->blksz / 4), data->blocks, OMAP_DMA_SYNC_FRAME, + sync_dev, sync_dir); + else + /* REVISIT: The MMC buffer increments only when MSB is written. + * Return error for blksz which is non multiple of four. + */ + return -EINVAL; + + omap_start_dma(dma_ch); + return 0; +} + +static void set_data_timeout(struct mmc_omap_host *host, + struct mmc_request *req) +{ + unsigned int timeout, cycle_ns; + uint32_t reg, clkd, dto = 0; + + reg = OMAP_HSMMC_READ(host->base, SYSCTL); + clkd = (reg & CLKD_MASK) >> CLKD_SHIFT; + if (clkd == 0) + clkd = 1; + + cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd); + timeout = req->data->timeout_ns / cycle_ns; + timeout += req->data->timeout_clks; + if (timeout) { + while ((timeout & 0x80000000) == 0) { + dto += 1; + timeout <<= 1; + } + dto = 31 - dto; + timeout <<= 1; + if (timeout && dto) + dto += 1; + if (dto >= 13) + dto -= 13; + else + dto = 0; + if (dto > 14) + dto = 14; + } + + reg &= ~DTO_MASK; + reg |= dto << DTO_SHIFT; + OMAP_HSMMC_WRITE(host->base, SYSCTL, reg); +} + +/* + * Configure block length for MMC/SD cards and initiate the transfer. + */ +static int +mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req) +{ + int ret; + host->data = req->data; + + if (req->data == NULL) { + host->datadir = OMAP_MMC_DATADIR_NONE; + OMAP_HSMMC_WRITE(host->base, BLK, 0); + return 0; + } + + OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz) + | (req->data->blocks << 16)); + set_data_timeout(host, req); + + host->datadir = (req->data->flags & MMC_DATA_WRITE) ? + OMAP_MMC_DATADIR_WRITE : OMAP_MMC_DATADIR_READ; + + if (host->use_dma) { + ret = mmc_omap_start_dma_transfer(host, req); + if (ret != 0) { + dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n"); + return ret; + } + } + return 0; +} + +/* + * Request function. for read/write operation + */ +static void omap_mmc_request(struct mmc_host *mmc, struct mmc_request *req) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + + WARN_ON(host->mrq != NULL); + host->mrq = req; + mmc_omap_prepare_data(host, req); + mmc_omap_start_command(host, req->cmd, req->data); +} + + +/* Routine to configure clock values. Exposed API to core */ +static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + u16 dsor = 0; + unsigned long regval; + unsigned long timeout; + + switch (ios->power_mode) { + case MMC_POWER_OFF: + mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); + /* + * Reset bus voltage to 3V if it got set to 1.8V earlier. + * REVISIT: If we are able to detect cards after unplugging + * a 1.8V card, this code should not be needed. + */ + if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) { + int vdd = fls(host->mmc->ocr_avail) - 1; + if (omap_mmc_switch_opcond(host, vdd) != 0) + host->mmc->ios.vdd = vdd; + } + break; + case MMC_POWER_UP: + mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd); + break; + } + + switch (mmc->ios.bus_width) { + case MMC_BUS_WIDTH_4: + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT); + break; + case MMC_BUS_WIDTH_1: + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT); + break; + } + + if (host->id == OMAP_MMC1_DEVID) { + /* Only MMC1 can operate at 3V/1.8V */ + if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) && + (ios->vdd == DUAL_VOLT_OCR_BIT)) { + /* + * The mmc_select_voltage fn of the core does + * not seem to set the power_mode to + * MMC_POWER_UP upon recalculating the voltage. + * vdd 1.8v. + */ + if (omap_mmc_switch_opcond(host, ios->vdd) != 0) + dev_dbg(mmc_dev(host->mmc), + "Switch operation failed\n"); + } + } + + if (ios->clock) { + dsor = OMAP_MMC_MASTER_CLOCK / ios->clock; + if (dsor < 1) + dsor = 1; + + if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock) + dsor++; + + if (dsor > 250) + dsor = 250; + } + omap_mmc_stop_clock(host); + regval = OMAP_HSMMC_READ(host->base, SYSCTL); + regval = regval & ~(CLKD_MASK); + regval = regval | (dsor << 6) | (DTO << 16); + OMAP_HSMMC_WRITE(host->base, SYSCTL, regval); + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | ICE); + + /* Wait till the ICS bit is set */ + timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); + while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != 0x2 + && time_before(jiffies, timeout)) + msleep(1); + + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | CEN); + + if (ios->power_mode == MMC_POWER_ON) + send_init_stream(host); + + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) + OMAP_HSMMC_WRITE(host->base, CON, + OMAP_HSMMC_READ(host->base, CON) | OD); +} + +static int omap_hsmmc_get_cd(struct mmc_host *mmc) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + struct omap_mmc_platform_data *pdata = host->pdata; + + if (!pdata->slots[0].card_detect) + return -ENOSYS; + return pdata->slots[0].card_detect(pdata->slots[0].card_detect_irq); +} + +static int omap_hsmmc_get_ro(struct mmc_host *mmc) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + struct omap_mmc_platform_data *pdata = host->pdata; + + if (!pdata->slots[0].get_ro) + return -ENOSYS; + return pdata->slots[0].get_ro(host->dev, 0); +} + +static struct mmc_host_ops mmc_omap_ops = { + .request = omap_mmc_request, + .set_ios = omap_mmc_set_ios, + .get_cd = omap_hsmmc_get_cd, + .get_ro = omap_hsmmc_get_ro, + /* NYET -- enable_sdio_irq */ +}; + +static int __init omap_mmc_probe(struct platform_device *pdev) +{ + struct omap_mmc_platform_data *pdata = pdev->dev.platform_data; + struct mmc_host *mmc; + struct mmc_omap_host *host = NULL; + struct resource *res; + int ret = 0, irq; + u32 hctl, capa; + + if (pdata == NULL) { + dev_err(&pdev->dev, "Platform Data is missing\n"); + return -ENXIO; + } + + if (pdata->nr_slots == 0) { + dev_err(&pdev->dev, "No Slots\n"); + return -ENXIO; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + if (res == NULL || irq < 0) + return -ENXIO; + + res = request_mem_region(res->start, res->end - res->start + 1, + pdev->name); + if (res == NULL) + return -EBUSY; + + mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto err; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + host->pdata = pdata; + host->dev = &pdev->dev; + host->use_dma = 1; + host->dev->dma_mask = &pdata->dma_mask; + host->dma_ch = -1; + host->irq = irq; + host->id = pdev->id; + host->slot_id = 0; + host->mapbase = res->start; + host->base = ioremap(host->mapbase, SZ_4K); + + platform_set_drvdata(pdev, host); + INIT_WORK(&host->mmc_carddetect_work, mmc_omap_detect); + + mmc->ops = &mmc_omap_ops; + mmc->f_min = 400000; + mmc->f_max = 52000000; + + sema_init(&host->sem, 1); + + host->iclk = clk_get(&pdev->dev, "mmchs_ick"); + if (IS_ERR(host->iclk)) { + ret = PTR_ERR(host->iclk); + host->iclk = NULL; + goto err1; + } + host->fclk = clk_get(&pdev->dev, "mmchs_fck"); + if (IS_ERR(host->fclk)) { + ret = PTR_ERR(host->fclk); + host->fclk = NULL; + clk_put(host->iclk); + goto err1; + } + + if (clk_enable(host->fclk) != 0) { + clk_put(host->iclk); + clk_put(host->fclk); + goto err1; + } + + if (clk_enable(host->iclk) != 0) { + clk_disable(host->fclk); + clk_put(host->iclk); + clk_put(host->fclk); + goto err1; + } + + host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck"); + /* + * MMC can still work without debounce clock. + */ + if (IS_ERR(host->dbclk)) + dev_warn(mmc_dev(host->mmc), "Failed to get debounce clock\n"); + else + if (clk_enable(host->dbclk) != 0) + dev_dbg(mmc_dev(host->mmc), "Enabling debounce" + " clk failed\n"); + else + host->dbclk_enabled = 1; + +#ifdef CONFIG_MMC_BLOCK_BOUNCE + mmc->max_phys_segs = 1; + mmc->max_hw_segs = 1; +#endif + mmc->max_blk_size = 512; /* Block Length at max can be 1024 */ + mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */ + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_req_size; + + mmc->ocr_avail = mmc_slot(host).ocr_mask; + mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; + + if (pdata->slots[host->slot_id].wires >= 4) + mmc->caps |= MMC_CAP_4_BIT_DATA; + + /* Only MMC1 supports 3.0V */ + if (host->id == OMAP_MMC1_DEVID) { + hctl = SDVS30; + capa = VS30 | VS18; + } else { + hctl = SDVS18; + capa = VS18; + } + + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | hctl); + + OMAP_HSMMC_WRITE(host->base, CAPA, + OMAP_HSMMC_READ(host->base, CAPA) | capa); + + /* Set the controller to AUTO IDLE mode */ + OMAP_HSMMC_WRITE(host->base, SYSCONFIG, + OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE); + + /* Set SD bus power bit */ + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | SDBP); + + /* Request IRQ for MMC operations */ + ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED, + mmc_hostname(mmc), host); + if (ret) { + dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n"); + goto err_irq; + } + + if (pdata->init != NULL) { + if (pdata->init(&pdev->dev) != 0) { + dev_dbg(mmc_dev(host->mmc), + "Unable to configure MMC IRQs\n"); + goto err_irq_cd_init; + } + } + + /* Request IRQ for card detect */ + if ((mmc_slot(host).card_detect_irq) && (mmc_slot(host).card_detect)) { + ret = request_irq(mmc_slot(host).card_detect_irq, + omap_mmc_cd_handler, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING + | IRQF_DISABLED, + mmc_hostname(mmc), host); + if (ret) { + dev_dbg(mmc_dev(host->mmc), + "Unable to grab MMC CD IRQ\n"); + goto err_irq_cd; + } + } + + OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK); + OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK); + + mmc_add_host(mmc); + + if (host->pdata->slots[host->slot_id].name != NULL) { + ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name); + if (ret < 0) + goto err_slot_name; + } + if (mmc_slot(host).card_detect_irq && mmc_slot(host).card_detect && + host->pdata->slots[host->slot_id].get_cover_state) { + ret = device_create_file(&mmc->class_dev, + &dev_attr_cover_switch); + if (ret < 0) + goto err_cover_switch; + } + + return 0; + +err_cover_switch: + device_remove_file(&mmc->class_dev, &dev_attr_cover_switch); +err_slot_name: + mmc_remove_host(mmc); +err_irq_cd: + free_irq(mmc_slot(host).card_detect_irq, host); +err_irq_cd_init: + free_irq(host->irq, host); +err_irq: + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_put(host->fclk); + clk_put(host->iclk); + if (host->dbclk_enabled) { + clk_disable(host->dbclk); + clk_put(host->dbclk); + } + +err1: + iounmap(host->base); +err: + dev_dbg(mmc_dev(host->mmc), "Probe Failed\n"); + release_mem_region(res->start, res->end - res->start + 1); + if (host) + mmc_free_host(mmc); + return ret; +} + +static int omap_mmc_remove(struct platform_device *pdev) +{ + struct mmc_omap_host *host = platform_get_drvdata(pdev); + struct resource *res; + + if (host) { + mmc_remove_host(host->mmc); + if (host->pdata->cleanup) + host->pdata->cleanup(&pdev->dev); + free_irq(host->irq, host); + if (mmc_slot(host).card_detect_irq) + free_irq(mmc_slot(host).card_detect_irq, host); + flush_scheduled_work(); + + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_put(host->fclk); + clk_put(host->iclk); + if (host->dbclk_enabled) { + clk_disable(host->dbclk); + clk_put(host->dbclk); + } + + mmc_free_host(host->mmc); + iounmap(host->base); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) + release_mem_region(res->start, res->end - res->start + 1); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state) +{ + int ret = 0; + struct mmc_omap_host *host = platform_get_drvdata(pdev); + + if (host && host->suspended) + return 0; + + if (host) { + ret = mmc_suspend_host(host->mmc, state); + if (ret == 0) { + host->suspended = 1; + + OMAP_HSMMC_WRITE(host->base, ISE, 0); + OMAP_HSMMC_WRITE(host->base, IE, 0); + + if (host->pdata->suspend) { + ret = host->pdata->suspend(&pdev->dev, + host->slot_id); + if (ret) + dev_dbg(mmc_dev(host->mmc), + "Unable to handle MMC board" + " level suspend\n"); + } + + if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) { + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) + & SDVSCLR); + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) + | SDVS30); + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) + | SDBP); + } + + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_disable(host->dbclk); + } + + } + return ret; +} + +/* Routine to resume the MMC device */ +static int omap_mmc_resume(struct platform_device *pdev) +{ + int ret = 0; + struct mmc_omap_host *host = platform_get_drvdata(pdev); + + if (host && !host->suspended) + return 0; + + if (host) { + + ret = clk_enable(host->fclk); + if (ret) + goto clk_en_err; + + ret = clk_enable(host->iclk); + if (ret) { + clk_disable(host->fclk); + clk_put(host->fclk); + goto clk_en_err; + } + + if (clk_enable(host->dbclk) != 0) + dev_dbg(mmc_dev(host->mmc), + "Enabling debounce clk failed\n"); + + if (host->pdata->resume) { + ret = host->pdata->resume(&pdev->dev, host->slot_id); + if (ret) + dev_dbg(mmc_dev(host->mmc), + "Unmask interrupt failed\n"); + } + + /* Notify the core to resume the host */ + ret = mmc_resume_host(host->mmc); + if (ret == 0) + host->suspended = 0; + } + + return ret; + +clk_en_err: + dev_dbg(mmc_dev(host->mmc), + "Failed to enable MMC clocks during resume\n"); + return ret; +} + +#else +#define omap_mmc_suspend NULL +#define omap_mmc_resume NULL +#endif + +static struct platform_driver omap_mmc_driver = { + .probe = omap_mmc_probe, + .remove = omap_mmc_remove, + .suspend = omap_mmc_suspend, + .resume = omap_mmc_resume, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init omap_mmc_init(void) +{ + /* Register the MMC driver */ + return platform_driver_register(&omap_mmc_driver); +} + +static void __exit omap_mmc_cleanup(void) +{ + /* Unregister MMC driver */ + platform_driver_unregister(&omap_mmc_driver); +} + +module_init(omap_mmc_init); +module_exit(omap_mmc_cleanup); + +MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_AUTHOR("Texas Instruments Inc"); diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index fcc98a4cce3..35a98eec741 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -20,7 +20,7 @@ #include <linux/irq.h> #include <linux/io.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/regs-sdi.h> #include <mach/regs-gpio.h> diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 65929db2944..1f6eb257871 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -676,7 +676,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) dev_dbg(ctrl->dev, "fsl_elbc_init: nand->numchips = %d\n", chip->numchips); - dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %ld\n", + dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %lld\n", chip->chipsize); dev_dbg(ctrl->dev, "fsl_elbc_init: nand->pagemask = %8x\n", chip->pagemask); @@ -703,7 +703,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.layout = %p\n", chip->ecc.layout); dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags); - dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %d\n", mtd->size); + dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size); dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->erasesize = %d\n", mtd->erasesize); dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->writesize = %d\n", @@ -932,8 +932,8 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl, #endif add_mtd_device(&priv->mtd); - printk(KERN_INFO "eLBC NAND device at 0x%zx, bank %d\n", - res.start, priv->bank); + printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n", + (unsigned long long)res.start, priv->bank); return 0; err: diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 9bd6c9ac844..a8b9376cf32 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -107,7 +107,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev, if (pasemi_nand_mtd) return -ENODEV; - pr_debug("pasemi_nand at %lx-%lx\n", res.start, res.end); + pr_debug("pasemi_nand at %llx-%llx\n", res.start, res.end); /* Allocate memory for MTD device structure and private data */ pasemi_nand_mtd = kzalloc(sizeof(struct mtd_info) + @@ -170,7 +170,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev, goto out_lpc; } - printk(KERN_INFO "PA Semi NAND flash at %08lx, control at I/O %x\n", + printk(KERN_INFO "PA Semi NAND flash at %08llx, control at I/O %x\n", res.start, lpcctl); return 0; diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 96ecc1766fa..77a4f144615 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -629,7 +629,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) } if (c->gpio_irq) { - if ((r = omap_request_gpio(c->gpio_irq)) < 0) { + if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) { dev_err(&pdev->dev, "Failed to request GPIO%d for " "OneNAND\n", c->gpio_irq); goto err_iounmap; @@ -726,7 +726,7 @@ err_release_dma: free_irq(gpio_to_irq(c->gpio_irq), c); err_release_gpio: if (c->gpio_irq) - omap_free_gpio(c->gpio_irq); + gpio_free(c->gpio_irq); err_iounmap: iounmap(c->onenand.base); err_release_mem_region: @@ -761,7 +761,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); if (c->gpio_irq) { free_irq(gpio_to_irq(c->gpio_irq), c); - omap_free_gpio(c->gpio_irq); + gpio_free(c->gpio_irq); } iounmap(c->onenand.base); release_mem_region(c->phys_base, ONENAND_IO_SIZE); diff --git a/drivers/mtd/ubi/Kconfig.debug b/drivers/mtd/ubi/Kconfig.debug index 1e2ee22edef..2246f154e2f 100644 --- a/drivers/mtd/ubi/Kconfig.debug +++ b/drivers/mtd/ubi/Kconfig.debug @@ -33,16 +33,6 @@ config MTD_UBI_DEBUG_DISABLE_BGT This option switches the background thread off by default. The thread may be also be enabled/disabled via UBI sysfs. -config MTD_UBI_DEBUG_USERSPACE_IO - bool "Direct user-space write/erase support" - default n - depends on MTD_UBI_DEBUG - help - By default, users cannot directly write and erase individual - eraseblocks of dynamic volumes, and have to use update operation - instead. This option enables this capability - it is very useful for - debugging and testing. - config MTD_UBI_DEBUG_EMULATE_BITFLIPS bool "Emulate flash bit-flips" depends on MTD_UBI_DEBUG diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 9082768cc6c..4048db83aef 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -263,8 +263,12 @@ static ssize_t dev_attribute_show(struct device *dev, return ret; } -/* Fake "release" method for UBI devices */ -static void dev_release(struct device *dev) { } +static void dev_release(struct device *dev) +{ + struct ubi_device *ubi = container_of(dev, struct ubi_device, dev); + + kfree(ubi); +} /** * ubi_sysfs_init - initialize sysfs for an UBI device. @@ -380,7 +384,7 @@ static void free_user_volumes(struct ubi_device *ubi) */ static int uif_init(struct ubi_device *ubi) { - int i, err, do_free = 0; + int i, err; dev_t dev; sprintf(ubi->ubi_name, UBI_NAME_STR "%d", ubi->ubi_num); @@ -427,13 +431,10 @@ static int uif_init(struct ubi_device *ubi) out_volumes: kill_volumes(ubi); - do_free = 0; out_sysfs: ubi_sysfs_close(ubi); cdev_del(&ubi->cdev); out_unreg: - if (do_free) - free_user_volumes(ubi); unregister_chrdev_region(ubi->cdev.dev, ubi->vtbl_slots + 1); ubi_err("cannot initialize UBI %s, error %d", ubi->ubi_name, err); return err; @@ -947,6 +948,12 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) if (ubi->bgt_thread) kthread_stop(ubi->bgt_thread); + /* + * Get a reference to the device in order to prevent 'dev_release()' + * from freeing @ubi object. + */ + get_device(&ubi->dev); + uif_close(ubi); ubi_wl_close(ubi); free_internal_volumes(ubi); @@ -958,7 +965,7 @@ int ubi_detach_mtd_dev(int ubi_num, int anyway) vfree(ubi->dbg_peb_buf); #endif ubi_msg("mtd%d is detached from ubi%d", ubi->mtd->index, ubi->ubi_num); - kfree(ubi); + put_device(&ubi->dev); return 0; } diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 98cf31ed081..e63c8fc3df3 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -40,9 +40,9 @@ #include <linux/ioctl.h> #include <linux/capability.h> #include <linux/uaccess.h> -#include <linux/smp_lock.h> +#include <linux/compat.h> +#include <linux/math64.h> #include <mtd/ubi-user.h> -#include <asm/div64.h> #include "ubi.h" /** @@ -195,7 +195,6 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, int err, lnum, off, len, tbuf_size; size_t count_save = count; void *tbuf; - uint64_t tmp; dbg_gen("read %zd bytes from offset %lld of volume %d", count, *offp, vol->vol_id); @@ -225,10 +224,7 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, return -ENOMEM; len = count > tbuf_size ? tbuf_size : count; - - tmp = *offp; - off = do_div(tmp, vol->usable_leb_size); - lnum = tmp; + lnum = div_u64_rem(*offp, vol->usable_leb_size, &off); do { cond_resched(); @@ -263,12 +259,9 @@ static ssize_t vol_cdev_read(struct file *file, __user char *buf, size_t count, return err ? err : count_save - count; } -#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO - /* * This function allows to directly write to dynamic UBI volumes, without - * issuing the volume update operation. Available only as a debugging feature. - * Very useful for testing UBI. + * issuing the volume update operation. */ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, size_t count, loff_t *offp) @@ -279,7 +272,9 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, int lnum, off, len, tbuf_size, err = 0; size_t count_save = count; char *tbuf; - uint64_t tmp; + + if (!vol->direct_writes) + return -EPERM; dbg_gen("requested: write %zd bytes to offset %lld of volume %u", count, *offp, vol->vol_id); @@ -287,10 +282,7 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, if (vol->vol_type == UBI_STATIC_VOLUME) return -EROFS; - tmp = *offp; - off = do_div(tmp, vol->usable_leb_size); - lnum = tmp; - + lnum = div_u64_rem(*offp, vol->usable_leb_size, &off); if (off & (ubi->min_io_size - 1)) { dbg_err("unaligned position"); return -EINVAL; @@ -347,10 +339,6 @@ static ssize_t vol_cdev_direct_write(struct file *file, const char __user *buf, return err ? err : count_save - count; } -#else -#define vol_cdev_direct_write(file, buf, count, offp) (-EPERM) -#endif /* CONFIG_MTD_UBI_DEBUG_USERSPACE_IO */ - static ssize_t vol_cdev_write(struct file *file, const char __user *buf, size_t count, loff_t *offp) { @@ -402,8 +390,8 @@ static ssize_t vol_cdev_write(struct file *file, const char __user *buf, return count; } -static int vol_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long vol_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; struct ubi_volume_desc *desc = file->private_data; @@ -487,7 +475,6 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, break; } -#ifdef CONFIG_MTD_UBI_DEBUG_USERSPACE_IO /* Logical eraseblock erasure command */ case UBI_IOCEBER: { @@ -518,13 +505,77 @@ static int vol_cdev_ioctl(struct inode *inode, struct file *file, err = ubi_wl_flush(ubi); break; } -#endif + + /* Logical eraseblock map command */ + case UBI_IOCEBMAP: + { + struct ubi_map_req req; + + err = copy_from_user(&req, argp, sizeof(struct ubi_map_req)); + if (err) { + err = -EFAULT; + break; + } + err = ubi_leb_map(desc, req.lnum, req.dtype); + break; + } + + /* Logical eraseblock un-map command */ + case UBI_IOCEBUNMAP: + { + int32_t lnum; + + err = get_user(lnum, (__user int32_t *)argp); + if (err) { + err = -EFAULT; + break; + } + err = ubi_leb_unmap(desc, lnum); + break; + } + + /* Check if logical eraseblock is mapped command */ + case UBI_IOCEBISMAP: + { + int32_t lnum; + + err = get_user(lnum, (__user int32_t *)argp); + if (err) { + err = -EFAULT; + break; + } + err = ubi_is_mapped(desc, lnum); + break; + } + + /* Set volume property command*/ + case UBI_IOCSETPROP: + { + struct ubi_set_prop_req req; + + err = copy_from_user(&req, argp, + sizeof(struct ubi_set_prop_req)); + if (err) { + err = -EFAULT; + break; + } + switch (req.property) { + case UBI_PROP_DIRECT_WRITE: + mutex_lock(&ubi->volumes_mutex); + desc->vol->direct_writes = !!req.value; + mutex_unlock(&ubi->volumes_mutex); + break; + default: + err = -EINVAL; + break; + } + break; + } default: err = -ENOTTY; break; } - return err; } @@ -762,8 +813,8 @@ out_free: return err; } -static int ubi_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ubi_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; struct ubi_device *ubi; @@ -773,7 +824,7 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, if (!capable(CAP_SYS_RESOURCE)) return -EPERM; - ubi = ubi_get_by_major(imajor(inode)); + ubi = ubi_get_by_major(imajor(file->f_mapping->host)); if (!ubi) return -ENODEV; @@ -843,7 +894,6 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, case UBI_IOCRSVOL: { int pebs; - uint64_t tmp; struct ubi_rsvol_req req; dbg_gen("re-size volume"); @@ -863,9 +913,8 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, break; } - tmp = req.bytes; - pebs = !!do_div(tmp, desc->vol->usable_leb_size); - pebs += tmp; + pebs = div_u64(req.bytes + desc->vol->usable_leb_size - 1, + desc->vol->usable_leb_size); mutex_lock(&ubi->volumes_mutex); err = ubi_resize_volume(desc, pebs); @@ -909,8 +958,8 @@ static int ubi_cdev_ioctl(struct inode *inode, struct file *file, return err; } -static int ctrl_cdev_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long ctrl_cdev_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { int err = 0; void __user *argp = (void __user *)arg; @@ -986,26 +1035,59 @@ static int ctrl_cdev_ioctl(struct inode *inode, struct file *file, return err; } -/* UBI control character device operations */ -struct file_operations ubi_ctrl_cdev_operations = { - .ioctl = ctrl_cdev_ioctl, - .owner = THIS_MODULE, +#ifdef CONFIG_COMPAT +static long vol_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return vol_cdev_ioctl(file, cmd, translated_arg); +} + +static long ubi_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return ubi_cdev_ioctl(file, cmd, translated_arg); +} + +static long ctrl_cdev_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned long translated_arg = (unsigned long)compat_ptr(arg); + + return ctrl_cdev_ioctl(file, cmd, translated_arg); +} +#else +#define vol_cdev_compat_ioctl NULL +#define ubi_cdev_compat_ioctl NULL +#define ctrl_cdev_compat_ioctl NULL +#endif + +/* UBI volume character device operations */ +const struct file_operations ubi_vol_cdev_operations = { + .owner = THIS_MODULE, + .open = vol_cdev_open, + .release = vol_cdev_release, + .llseek = vol_cdev_llseek, + .read = vol_cdev_read, + .write = vol_cdev_write, + .unlocked_ioctl = vol_cdev_ioctl, + .compat_ioctl = vol_cdev_compat_ioctl, }; /* UBI character device operations */ -struct file_operations ubi_cdev_operations = { - .owner = THIS_MODULE, - .ioctl = ubi_cdev_ioctl, - .llseek = no_llseek, +const struct file_operations ubi_cdev_operations = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .unlocked_ioctl = ubi_cdev_ioctl, + .compat_ioctl = ubi_cdev_compat_ioctl, }; -/* UBI volume character device operations */ -struct file_operations ubi_vol_cdev_operations = { - .owner = THIS_MODULE, - .open = vol_cdev_open, - .release = vol_cdev_release, - .llseek = vol_cdev_llseek, - .read = vol_cdev_read, - .write = vol_cdev_write, - .ioctl = vol_cdev_ioctl, +/* UBI control character device operations */ +const struct file_operations ubi_ctrl_cdev_operations = { + .owner = THIS_MODULE, + .unlocked_ioctl = ctrl_cdev_ioctl, + .compat_ioctl = ctrl_cdev_compat_ioctl, }; diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c index 6dd4f5e77f8..49cd55ade9c 100644 --- a/drivers/mtd/ubi/gluebi.c +++ b/drivers/mtd/ubi/gluebi.c @@ -28,7 +28,7 @@ * eraseblock size is equivalent to the logical eraseblock size of the volume. */ -#include <asm/div64.h> +#include <linux/math64.h> #include "ubi.h" /** @@ -109,7 +109,6 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len, int err = 0, lnum, offs, total_read; struct ubi_volume *vol; struct ubi_device *ubi; - uint64_t tmp = from; dbg_gen("read %zd bytes from offset %lld", len, from); @@ -119,9 +118,7 @@ static int gluebi_read(struct mtd_info *mtd, loff_t from, size_t len, vol = container_of(mtd, struct ubi_volume, gluebi_mtd); ubi = vol->ubi; - offs = do_div(tmp, mtd->erasesize); - lnum = tmp; - + lnum = div_u64_rem(from, mtd->erasesize, &offs); total_read = len; while (total_read) { size_t to_read = mtd->erasesize - offs; @@ -160,7 +157,6 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len, int err = 0, lnum, offs, total_written; struct ubi_volume *vol; struct ubi_device *ubi; - uint64_t tmp = to; dbg_gen("write %zd bytes to offset %lld", len, to); @@ -173,8 +169,7 @@ static int gluebi_write(struct mtd_info *mtd, loff_t to, size_t len, if (ubi->ro_mode) return -EROFS; - offs = do_div(tmp, mtd->erasesize); - lnum = tmp; + lnum = div_u64_rem(to, mtd->erasesize, &offs); if (len % mtd->writesize || offs % mtd->writesize) return -EINVAL; diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index ecde202a5a1..c3d653ba5ca 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -42,7 +42,7 @@ #include <linux/err.h> #include <linux/crc32.h> -#include <asm/div64.h> +#include <linux/math64.h> #include "ubi.h" #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID @@ -904,10 +904,8 @@ struct ubi_scan_info *ubi_scan(struct ubi_device *ubi) dbg_msg("scanning is finished"); /* Calculate mean erase counter */ - if (si->ec_count) { - do_div(si->ec_sum, si->ec_count); - si->mean_ec = si->ec_sum; - } + if (si->ec_count) + si->mean_ec = div_u64(si->ec_sum, si->ec_count); if (si->is_empty) ubi_msg("empty MTD device detected"); diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 4a8ec485c91..c055511bb1b 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -206,6 +206,7 @@ struct ubi_volume_desc; * @upd_marker: %1 if the update marker is set for this volume * @updating: %1 if the volume is being updated * @changing_leb: %1 if the atomic LEB change ioctl command is in progress + * @direct_writes: %1 if direct writes are enabled for this volume * * @gluebi_desc: gluebi UBI volume descriptor * @gluebi_refcount: reference count of the gluebi MTD device @@ -253,6 +254,7 @@ struct ubi_volume { unsigned int upd_marker:1; unsigned int updating:1; unsigned int changing_leb:1; + unsigned int direct_writes:1; #ifdef CONFIG_MTD_UBI_GLUEBI /* @@ -304,7 +306,8 @@ struct ubi_wl_entry; * @vtbl_size: size of the volume table in bytes * @vtbl: in-RAM volume table copy * @volumes_mutex: protects on-flash volume table and serializes volume - * changes, like creation, deletion, update, re-size and re-name + * changes, like creation, deletion, update, re-size, + * re-name and set property * * @max_ec: current highest erase counter value * @mean_ec: current mean erase counter value @@ -449,9 +452,9 @@ struct ubi_device { }; extern struct kmem_cache *ubi_wl_entry_slab; -extern struct file_operations ubi_ctrl_cdev_operations; -extern struct file_operations ubi_cdev_operations; -extern struct file_operations ubi_vol_cdev_operations; +extern const struct file_operations ubi_ctrl_cdev_operations; +extern const struct file_operations ubi_cdev_operations; +extern const struct file_operations ubi_vol_cdev_operations; extern struct class *ubi_class; extern struct mutex ubi_devices_mutex; diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c index 8b89cc18ff0..6b4d1ae891a 100644 --- a/drivers/mtd/ubi/upd.c +++ b/drivers/mtd/ubi/upd.c @@ -40,7 +40,7 @@ #include <linux/err.h> #include <linux/uaccess.h> -#include <asm/div64.h> +#include <linux/math64.h> #include "ubi.h" /** @@ -89,7 +89,6 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol, long long bytes) { int err; - uint64_t tmp; struct ubi_vtbl_record vtbl_rec; dbg_gen("clear update marker for volume %d", vol->vol_id); @@ -101,9 +100,9 @@ static int clear_update_marker(struct ubi_device *ubi, struct ubi_volume *vol, if (vol->vol_type == UBI_STATIC_VOLUME) { vol->corrupted = 0; - vol->used_bytes = tmp = bytes; - vol->last_eb_bytes = do_div(tmp, vol->usable_leb_size); - vol->used_ebs = tmp; + vol->used_bytes = bytes; + vol->used_ebs = div_u64_rem(bytes, vol->usable_leb_size, + &vol->last_eb_bytes); if (vol->last_eb_bytes) vol->used_ebs += 1; else @@ -131,7 +130,6 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, long long bytes) { int i, err; - uint64_t tmp; dbg_gen("start update of volume %d, %llu bytes", vol->vol_id, bytes); ubi_assert(!vol->updating && !vol->changing_leb); @@ -161,9 +159,8 @@ int ubi_start_update(struct ubi_device *ubi, struct ubi_volume *vol, if (!vol->upd_buf) return -ENOMEM; - tmp = bytes; - vol->upd_ebs = !!do_div(tmp, vol->usable_leb_size); - vol->upd_ebs += tmp; + vol->upd_ebs = div_u64(bytes + vol->usable_leb_size - 1, + vol->usable_leb_size); vol->upd_bytes = bytes; vol->upd_received = 0; return 0; @@ -282,7 +279,6 @@ static int write_leb(struct ubi_device *ubi, struct ubi_volume *vol, int lnum, int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol, const void __user *buf, int count) { - uint64_t tmp; int lnum, offs, err = 0, len, to_write = count; dbg_gen("write %d of %lld bytes, %lld already passed", @@ -291,10 +287,7 @@ int ubi_more_update_data(struct ubi_device *ubi, struct ubi_volume *vol, if (ubi->ro_mode) return -EROFS; - tmp = vol->upd_received; - offs = do_div(tmp, vol->usable_leb_size); - lnum = tmp; - + lnum = div_u64_rem(vol->upd_received, vol->usable_leb_size, &offs); if (vol->upd_received + count > vol->upd_bytes) to_write = count = vol->upd_bytes - vol->upd_received; diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c index 22e1d7398fc..df5483562b7 100644 --- a/drivers/mtd/ubi/vmt.c +++ b/drivers/mtd/ubi/vmt.c @@ -24,7 +24,7 @@ */ #include <linux/err.h> -#include <asm/div64.h> +#include <linux/math64.h> #include "ubi.h" #ifdef CONFIG_MTD_UBI_DEBUG_PARANOID @@ -205,7 +205,6 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) int i, err, vol_id = req->vol_id, do_free = 1; struct ubi_volume *vol; struct ubi_vtbl_record vtbl_rec; - uint64_t bytes; dev_t dev; if (ubi->ro_mode) @@ -255,10 +254,8 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) /* Calculate how many eraseblocks are requested */ vol->usable_leb_size = ubi->leb_size - ubi->leb_size % req->alignment; - bytes = req->bytes; - if (do_div(bytes, vol->usable_leb_size)) - vol->reserved_pebs = 1; - vol->reserved_pebs += bytes; + vol->reserved_pebs += div_u64(req->bytes + vol->usable_leb_size - 1, + vol->usable_leb_size); /* Reserve physical eraseblocks */ if (vol->reserved_pebs > ubi->avail_pebs) { @@ -301,10 +298,10 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) vol->used_bytes = (long long)vol->used_ebs * vol->usable_leb_size; } else { - bytes = vol->used_bytes; - vol->last_eb_bytes = do_div(bytes, vol->usable_leb_size); - vol->used_ebs = bytes; - if (vol->last_eb_bytes) + vol->used_ebs = div_u64_rem(vol->used_bytes, + vol->usable_leb_size, + &vol->last_eb_bytes); + if (vol->last_eb_bytes != 0) vol->used_ebs += 1; else vol->last_eb_bytes = vol->usable_leb_size; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 9fe8cb7d43a..6bdfd47d679 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1829,7 +1829,7 @@ config 68360_ENET config FEC bool "FEC ethernet controller (of ColdFire CPUs)" - depends on M523x || M527x || M5272 || M528x || M520x + depends on M523x || M527x || M5272 || M528x || M520x || M532x help Say Y here if you want to use the built-in 10/100 Fast ethernet controller on some Motorola ColdFire processors. diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index 0c628a9e533..c2d012fcc29 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -208,9 +208,9 @@ am79c961_init_for_open(struct net_device *dev) /* * Stop the chip. */ - spin_lock_irqsave(priv->chip_lock, flags); + spin_lock_irqsave(&priv->chip_lock, flags); write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP); - spin_unlock_irqrestore(priv->chip_lock, flags); + spin_unlock_irqrestore(&priv->chip_lock, flags); write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */ write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */ @@ -332,10 +332,10 @@ am79c961_close(struct net_device *dev) netif_stop_queue(dev); netif_carrier_off(dev); - spin_lock_irqsave(priv->chip_lock, flags); + spin_lock_irqsave(&priv->chip_lock, flags); write_rreg (dev->base_addr, CSR0, CSR0_STOP); write_rreg (dev->base_addr, CSR3, CSR3_MASKALL); - spin_unlock_irqrestore(priv->chip_lock, flags); + spin_unlock_irqrestore(&priv->chip_lock, flags); free_irq (dev->irq, dev); @@ -391,7 +391,7 @@ static void am79c961_setmulticastlist (struct net_device *dev) am79c961_mc_hash(dmi, multi_hash); } - spin_lock_irqsave(priv->chip_lock, flags); + spin_lock_irqsave(&priv->chip_lock, flags); stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP; @@ -405,9 +405,9 @@ static void am79c961_setmulticastlist (struct net_device *dev) * Spin waiting for chip to report suspend mode */ while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) { - spin_unlock_irqrestore(priv->chip_lock, flags); + spin_unlock_irqrestore(&priv->chip_lock, flags); nop(); - spin_lock_irqsave(priv->chip_lock, flags); + spin_lock_irqsave(&priv->chip_lock, flags); } } @@ -429,7 +429,7 @@ static void am79c961_setmulticastlist (struct net_device *dev) write_rreg(dev->base_addr, CTRL1, 0); } - spin_unlock_irqrestore(priv->chip_lock, flags); + spin_unlock_irqrestore(&priv->chip_lock, flags); } static void am79c961_timeout(struct net_device *dev) @@ -467,10 +467,10 @@ am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev) am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP); priv->txhead = head; - spin_lock_irqsave(priv->chip_lock, flags); + spin_lock_irqsave(&priv->chip_lock, flags); write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA); dev->trans_start = jiffies; - spin_unlock_irqrestore(priv->chip_lock, flags); + spin_unlock_irqrestore(&priv->chip_lock, flags); /* * If the next packet is owned by the ethernet device, diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 6fcccef4cf3..15a5cf0f676 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -1,6 +1,6 @@ /* bnx2x.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2008 Broadcom Corporation + * Copyright (c) 2007-2009 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -271,14 +271,7 @@ struct bnx2x_fastpath { #define bnx2x_fp(bp, nr, var) (bp->fp[nr].var) -#define BNX2X_HAS_TX_WORK(fp) \ - ((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || \ - (fp->tx_pkt_prod != fp->tx_pkt_cons)) - -#define BNX2X_HAS_RX_WORK(fp) \ - (fp->rx_comp_cons != rx_cons_sb) - -#define BNX2X_HAS_WORK(fp) (BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp)) +#define BNX2X_HAS_WORK(fp) (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp)) /* MC hsi */ diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index fefa6ab1306..aea26b4dc45 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -1,4 +1,4 @@ -/* Copyright 2008 Broadcom Corporation +/* Copyright 2008-2009 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you @@ -317,6 +317,9 @@ static u8 bnx2x_emac_enable(struct link_params *params, val &= ~0x810; EMAC_WR(bp, EMAC_REG_EMAC_MODE, val); + /* enable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1); + /* enable emac for jumbo packets */ EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE, (EMAC_RX_MTU_SIZE_JUMBO_ENA | @@ -1609,7 +1612,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, u32 gp_status) { struct bnx2x *bp = params->bp; - + u16 new_line_speed; u8 rc = 0; vars->link_status = 0; @@ -1629,7 +1632,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, switch (gp_status & GP_STATUS_SPEED_MASK) { case GP_STATUS_10M: - vars->line_speed = SPEED_10; + new_line_speed = SPEED_10; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_10TFD; else @@ -1637,7 +1640,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, break; case GP_STATUS_100M: - vars->line_speed = SPEED_100; + new_line_speed = SPEED_100; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_100TXFD; else @@ -1646,7 +1649,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, case GP_STATUS_1G: case GP_STATUS_1G_KX: - vars->line_speed = SPEED_1000; + new_line_speed = SPEED_1000; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_1000TFD; else @@ -1654,7 +1657,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, break; case GP_STATUS_2_5G: - vars->line_speed = SPEED_2500; + new_line_speed = SPEED_2500; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_2500TFD; else @@ -1671,32 +1674,32 @@ static u8 bnx2x_link_settings_status(struct link_params *params, case GP_STATUS_10G_KX4: case GP_STATUS_10G_HIG: case GP_STATUS_10G_CX4: - vars->line_speed = SPEED_10000; + new_line_speed = SPEED_10000; vars->link_status |= LINK_10GTFD; break; case GP_STATUS_12G_HIG: - vars->line_speed = SPEED_12000; + new_line_speed = SPEED_12000; vars->link_status |= LINK_12GTFD; break; case GP_STATUS_12_5G: - vars->line_speed = SPEED_12500; + new_line_speed = SPEED_12500; vars->link_status |= LINK_12_5GTFD; break; case GP_STATUS_13G: - vars->line_speed = SPEED_13000; + new_line_speed = SPEED_13000; vars->link_status |= LINK_13GTFD; break; case GP_STATUS_15G: - vars->line_speed = SPEED_15000; + new_line_speed = SPEED_15000; vars->link_status |= LINK_15GTFD; break; case GP_STATUS_16G: - vars->line_speed = SPEED_16000; + new_line_speed = SPEED_16000; vars->link_status |= LINK_16GTFD; break; @@ -1708,6 +1711,15 @@ static u8 bnx2x_link_settings_status(struct link_params *params, break; } + /* Upon link speed change set the NIG into drain mode. + Comes to deals with possible FIFO glitch due to clk change + when speed is decreased without link down indicator */ + if (new_line_speed != vars->line_speed) { + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + + params->port*4, 0); + msleep(1); + } + vars->line_speed = new_line_speed; vars->link_status |= LINK_STATUS_SERDES_LINK; if ((params->req_line_speed == SPEED_AUTO_NEG) && @@ -3571,7 +3583,7 @@ static void bnx2x_set_xgxs_loopback(struct link_params *params, (MDIO_REG_BANK_CL73_IEEEB0 + (MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)), 0x6041); - + msleep(200); /* set aer mmd back */ bnx2x_set_aer_mmd(params, vars); @@ -3870,9 +3882,15 @@ static u8 bnx2x_link_initialize(struct link_params *params, } if (vars->phy_flags & PHY_XGXS_FLAG) { - if (params->req_line_speed && + if ((params->req_line_speed && ((params->req_line_speed == SPEED_100) || - (params->req_line_speed == SPEED_10))) { + (params->req_line_speed == SPEED_10))) || + (!params->req_line_speed && + (params->speed_cap_mask >= + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) && + (params->speed_cap_mask < + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) + )) { vars->phy_flags |= PHY_SGMII_FLAG; } else { vars->phy_flags &= ~PHY_SGMII_FLAG; @@ -4194,6 +4212,11 @@ static u8 bnx2x_update_link_down(struct link_params *params, /* activate nig drain */ REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); + /* disable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + + msleep(10); + /* reset BigMac */ bnx2x_bmac_rx_disable(bp, params->port); REG_WR(bp, GRCBASE_MISC + @@ -4238,6 +4261,7 @@ static u8 bnx2x_update_link_up(struct link_params *params, /* update shared memory */ bnx2x_update_mng(params, vars->link_status); + msleep(20); return rc; } /* This function should called upon link interrupt */ @@ -4276,6 +4300,9 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); + /* disable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); /* Check external link change only for non-direct */ @@ -4377,10 +4404,11 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base) ext_phy_addr[port], MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER1, &fw_ver1); - if (fw_ver1 == 0) { + if (fw_ver1 == 0 || fw_ver1 == 0x4321) { DP(NETIF_MSG_LINK, - "bnx2x_8073_common_init_phy port %x " - "fw Download failed\n", port); + "bnx2x_8073_common_init_phy port %x:" + "Download failed. fw version = 0x%x\n", + port, fw_ver1); return -EINVAL; } diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 7c533797c06..d3e7775a9cc 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -1,6 +1,6 @@ /* bnx2x_main.c: Broadcom Everest network driver. * - * Copyright (c) 2007-2008 Broadcom Corporation + * Copyright (c) 2007-2009 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -57,8 +57,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "1.45.23" -#define DRV_MODULE_RELDATE "2008/11/03" +#define DRV_MODULE_VERSION "1.45.26" +#define DRV_MODULE_RELDATE "2009/01/26" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung */ @@ -69,7 +69,7 @@ static char version[] __devinitdata = DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; MODULE_AUTHOR("Eliezer Tamir"); -MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver"); +MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710/57711/57711E Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_MODULE_VERSION); @@ -733,6 +733,24 @@ static u16 bnx2x_ack_int(struct bnx2x *bp) * fast path service functions */ +static inline int bnx2x_has_tx_work(struct bnx2x_fastpath *fp) +{ + u16 tx_cons_sb; + + /* Tell compiler that status block fields can change */ + barrier(); + tx_cons_sb = le16_to_cpu(*fp->tx_cons_sb); + return (fp->tx_pkt_cons != tx_cons_sb); +} + +static inline int bnx2x_has_tx_work_unload(struct bnx2x_fastpath *fp) +{ + /* Tell compiler that consumer and producer can change */ + barrier(); + return (fp->tx_pkt_prod != fp->tx_pkt_cons); + +} + /* free skb in the packet ring at pos idx * return idx of last bd freed */ @@ -5137,12 +5155,21 @@ static void enable_blocks_attention(struct bnx2x *bp) } +static void bnx2x_reset_common(struct bnx2x *bp) +{ + /* reset_common */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, + 0xd3ffff7f); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403); +} + static int bnx2x_init_common(struct bnx2x *bp) { u32 val, i; DP(BNX2X_MSG_MCP, "starting common init func %d\n", BP_FUNC(bp)); + bnx2x_reset_common(bp); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc); @@ -6123,8 +6150,8 @@ static void bnx2x_netif_start(struct bnx2x *bp) static void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw) { bnx2x_int_disable_sync(bp, disable_hw); + bnx2x_napi_disable(bp); if (netif_running(bp->dev)) { - bnx2x_napi_disable(bp); netif_tx_disable(bp->dev); bp->dev->trans_start = jiffies; /* prevent tx timeout */ } @@ -6144,7 +6171,7 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp, int set) * multicast 64-127:port0 128-191:port1 */ config->hdr.length_6b = 2; - config->hdr.offset = port ? 31 : 0; + config->hdr.offset = port ? 32 : 0; config->hdr.client_id = BP_CL_ID(bp); config->hdr.reserved1 = 0; @@ -6308,7 +6335,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev); static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) { u32 load_code; - int i, rc; + int i, rc = 0; #ifdef BNX2X_STOP_ON_ERROR if (unlikely(bp->panic)) return -EPERM; @@ -6316,48 +6343,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD; - /* Send LOAD_REQUEST command to MCP - Returns the type of LOAD command: - if it is the first port to be initialized - common blocks should be initialized, otherwise - not - */ - if (!BP_NOMCP(bp)) { - load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ); - if (!load_code) { - BNX2X_ERR("MCP response failure, aborting\n"); - return -EBUSY; - } - if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) - return -EBUSY; /* other port in diagnostic mode */ - - } else { - int port = BP_PORT(bp); - - DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n", - load_count[0], load_count[1], load_count[2]); - load_count[0]++; - load_count[1 + port]++; - DP(NETIF_MSG_IFUP, "NO MCP new load counts %d, %d, %d\n", - load_count[0], load_count[1], load_count[2]); - if (load_count[0] == 1) - load_code = FW_MSG_CODE_DRV_LOAD_COMMON; - else if (load_count[1 + port] == 1) - load_code = FW_MSG_CODE_DRV_LOAD_PORT; - else - load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION; - } - - if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) || - (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) - bp->port.pmf = 1; - else - bp->port.pmf = 0; - DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf); - - /* if we can't use MSI-X we only need one fp, - * so try to enable MSI-X with the requested number of fp's - * and fallback to inta with one fp - */ if (use_inta) { bp->num_queues = 1; @@ -6372,7 +6357,15 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) else bp->num_queues = 1; - if (bnx2x_enable_msix(bp)) { + DP(NETIF_MSG_IFUP, + "set number of queues to %d\n", bp->num_queues); + + /* if we can't use MSI-X we only need one fp, + * so try to enable MSI-X with the requested number of fp's + * and fallback to MSI or legacy INTx with one fp + */ + rc = bnx2x_enable_msix(bp); + if (rc) { /* failed to enable MSI-X */ bp->num_queues = 1; if (use_multi) @@ -6380,8 +6373,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) " to enable MSI-X\n"); } } - DP(NETIF_MSG_IFUP, - "set number of queues to %d\n", bp->num_queues); if (bnx2x_alloc_mem(bp)) return -ENOMEM; @@ -6390,30 +6381,85 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) bnx2x_fp(bp, i, disable_tpa) = ((bp->flags & TPA_ENABLE_FLAG) == 0); + for_each_queue(bp, i) + netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi), + bnx2x_poll, 128); + +#ifdef BNX2X_STOP_ON_ERROR + for_each_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + fp->poll_no_work = 0; + fp->poll_calls = 0; + fp->poll_max_calls = 0; + fp->poll_complete = 0; + fp->poll_exit = 0; + } +#endif + bnx2x_napi_enable(bp); + if (bp->flags & USING_MSIX_FLAG) { rc = bnx2x_req_msix_irqs(bp); if (rc) { pci_disable_msix(bp->pdev); - goto load_error; + goto load_error1; } + printk(KERN_INFO PFX "%s: using MSI-X\n", bp->dev->name); } else { bnx2x_ack_int(bp); rc = bnx2x_req_irq(bp); if (rc) { - BNX2X_ERR("IRQ request failed, aborting\n"); - goto load_error; + BNX2X_ERR("IRQ request failed rc %d, aborting\n", rc); + goto load_error1; } } - for_each_queue(bp, i) - netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi), - bnx2x_poll, 128); + /* Send LOAD_REQUEST command to MCP + Returns the type of LOAD command: + if it is the first port to be initialized + common blocks should be initialized, otherwise - not + */ + if (!BP_NOMCP(bp)) { + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ); + if (!load_code) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EBUSY; + goto load_error2; + } + if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) { + rc = -EBUSY; /* other port in diagnostic mode */ + goto load_error2; + } + + } else { + int port = BP_PORT(bp); + + DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n", + load_count[0], load_count[1], load_count[2]); + load_count[0]++; + load_count[1 + port]++; + DP(NETIF_MSG_IFUP, "NO MCP new load counts %d, %d, %d\n", + load_count[0], load_count[1], load_count[2]); + if (load_count[0] == 1) + load_code = FW_MSG_CODE_DRV_LOAD_COMMON; + else if (load_count[1 + port] == 1) + load_code = FW_MSG_CODE_DRV_LOAD_PORT; + else + load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION; + } + + if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) || + (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) + bp->port.pmf = 1; + else + bp->port.pmf = 0; + DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf); /* Initialize HW */ rc = bnx2x_init_hw(bp, load_code); if (rc) { BNX2X_ERR("HW init failed, aborting\n"); - goto load_int_disable; + goto load_error2; } /* Setup NIC internals and enable interrupts */ @@ -6425,7 +6471,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) if (!load_code) { BNX2X_ERR("MCP response failure, aborting\n"); rc = -EBUSY; - goto load_rings_free; + goto load_error3; } } @@ -6434,7 +6480,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) rc = bnx2x_setup_leading(bp); if (rc) { BNX2X_ERR("Setup leading failed!\n"); - goto load_netif_stop; + goto load_error3; } if (CHIP_IS_E1H(bp)) @@ -6447,7 +6493,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) for_each_nondefault_queue(bp, i) { rc = bnx2x_setup_multi(bp, i); if (rc) - goto load_netif_stop; + goto load_error3; } if (CHIP_IS_E1(bp)) @@ -6463,18 +6509,18 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) case LOAD_NORMAL: /* Tx queue should be only reenabled */ netif_wake_queue(bp->dev); + /* Initialize the receive filter. */ bnx2x_set_rx_mode(bp->dev); break; case LOAD_OPEN: netif_start_queue(bp->dev); + /* Initialize the receive filter. */ bnx2x_set_rx_mode(bp->dev); - if (bp->flags & USING_MSIX_FLAG) - printk(KERN_INFO PFX "%s: using MSI-X\n", - bp->dev->name); break; case LOAD_DIAG: + /* Initialize the receive filter. */ bnx2x_set_rx_mode(bp->dev); bp->state = BNX2X_STATE_DIAG; break; @@ -6492,20 +6538,25 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) return 0; -load_netif_stop: - bnx2x_napi_disable(bp); -load_rings_free: +load_error3: + bnx2x_int_disable_sync(bp, 1); + if (!BP_NOMCP(bp)) { + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP); + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE); + } + bp->port.pmf = 0; /* Free SKBs, SGEs, TPA pool and driver internals */ bnx2x_free_skbs(bp); for_each_queue(bp, i) bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); -load_int_disable: - bnx2x_int_disable_sync(bp, 1); +load_error2: /* Release IRQs */ bnx2x_free_irq(bp); -load_error: +load_error1: + bnx2x_napi_disable(bp); + for_each_queue(bp, i) + netif_napi_del(&bnx2x_fp(bp, i, napi)); bnx2x_free_mem(bp); - bp->port.pmf = 0; /* TBD we really need to reset the chip if we want to recover from this */ @@ -6578,6 +6629,7 @@ static int bnx2x_stop_leading(struct bnx2x *bp) } cnt--; msleep(1); + rmb(); /* Refresh the dsb_sp_prod */ } bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD; bp->fp[0].state = BNX2X_FP_STATE_CLOSED; @@ -6629,14 +6681,6 @@ static void bnx2x_reset_port(struct bnx2x *bp) /* TODO: Close Doorbell port? */ } -static void bnx2x_reset_common(struct bnx2x *bp) -{ - /* reset_common */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, - 0xd3ffff7f); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403); -} - static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code) { DP(BNX2X_MSG_MCP, "function %d reset_code %x\n", @@ -6677,20 +6721,22 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) bnx2x_set_storm_rx_mode(bp); bnx2x_netif_stop(bp, 1); - if (!netif_running(bp->dev)) - bnx2x_napi_disable(bp); + del_timer_sync(&bp->timer); SHMEM_WR(bp, func_mb[BP_FUNC(bp)].drv_pulse_mb, (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq)); bnx2x_stats_handle(bp, STATS_EVENT_STOP); + /* Release IRQs */ + bnx2x_free_irq(bp); + /* Wait until tx fast path tasks complete */ for_each_queue(bp, i) { struct bnx2x_fastpath *fp = &bp->fp[i]; cnt = 1000; smp_rmb(); - while (BNX2X_HAS_TX_WORK(fp)) { + while (bnx2x_has_tx_work_unload(fp)) { bnx2x_tx_int(fp, 1000); if (!cnt) { @@ -6711,9 +6757,6 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) /* Give HW time to discard old tx messages */ msleep(1); - /* Release IRQs */ - bnx2x_free_irq(bp); - if (CHIP_IS_E1(bp)) { struct mac_configuration_cmd *config = bnx2x_sp(bp, mcast_config); @@ -6822,6 +6865,8 @@ unload_error: bnx2x_free_skbs(bp); for_each_queue(bp, i) bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); + for_each_queue(bp, i) + netif_napi_del(&bnx2x_fp(bp, i, napi)); bnx2x_free_mem(bp); bp->state = BNX2X_STATE_CLOSED; @@ -6874,10 +6919,6 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) */ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); val = REG_RD(bp, DORQ_REG_NORM_CID_OFST); - if (val == 0x7) - REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); - if (val == 0x7) { u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; /* save our func */ @@ -6885,6 +6926,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) u32 swap_en; u32 swap_val; + /* clear the UNDI indication */ + REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); + BNX2X_DEV_INFO("UNDI is active! reset device\n"); /* try unload UNDI on port 0 */ @@ -6910,6 +6954,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) bnx2x_fw_command(bp, reset_code); } + /* now it's safe to release the lock */ + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + REG_WR(bp, (BP_PORT(bp) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0), 0x1000); @@ -6954,7 +7001,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) bp->fw_seq = (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) & DRV_MSG_SEQ_NUMBER_MASK); - } + + } else + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); } } @@ -6971,7 +7020,7 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp) id |= ((val & 0xf) << 12); val = REG_RD(bp, MISC_REG_CHIP_METAL); id |= ((val & 0xff) << 4); - REG_RD(bp, MISC_REG_BOND_ID); + val = REG_RD(bp, MISC_REG_BOND_ID); id |= (val & 0xf); bp->common.chip_id = id; bp->link_params.chip_id = bp->common.chip_id; @@ -8103,6 +8152,9 @@ static int bnx2x_get_eeprom(struct net_device *dev, struct bnx2x *bp = netdev_priv(dev); int rc; + if (!netif_running(dev)) + return -EAGAIN; + DP(BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n" DP_LEVEL " magic 0x%x offset 0x%x (%d) len 0x%x (%d)\n", eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset, @@ -8705,18 +8757,17 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up) if (loopback_mode == BNX2X_MAC_LOOPBACK) { bp->link_params.loopback_mode = LOOPBACK_BMAC; - bnx2x_acquire_phy_lock(bp); bnx2x_phy_init(&bp->link_params, &bp->link_vars); - bnx2x_release_phy_lock(bp); } else if (loopback_mode == BNX2X_PHY_LOOPBACK) { + u16 cnt = 1000; bp->link_params.loopback_mode = LOOPBACK_XGXS_10; - bnx2x_acquire_phy_lock(bp); bnx2x_phy_init(&bp->link_params, &bp->link_vars); - bnx2x_release_phy_lock(bp); /* wait until link state is restored */ - bnx2x_wait_for_link(bp, link_up); - + if (link_up) + while (cnt-- && bnx2x_test_link(&bp->link_params, + &bp->link_vars)) + msleep(10); } else return -EINVAL; @@ -8822,6 +8873,7 @@ static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up) return BNX2X_LOOPBACK_FAILED; bnx2x_netif_stop(bp, 1); + bnx2x_acquire_phy_lock(bp); if (bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK, link_up)) { DP(NETIF_MSG_PROBE, "MAC loopback failed\n"); @@ -8833,6 +8885,7 @@ static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up) rc |= BNX2X_PHY_LOOPBACK_FAILED; } + bnx2x_release_phy_lock(bp); bnx2x_netif_start(bp); return rc; @@ -8906,7 +8959,10 @@ static int bnx2x_test_intr(struct bnx2x *bp) return -ENODEV; config->hdr.length_6b = 0; - config->hdr.offset = 0; + if (CHIP_IS_E1(bp)) + config->hdr.offset = (BP_PORT(bp) ? 32 : 0); + else + config->hdr.offset = BP_FUNC(bp); config->hdr.client_id = BP_CL_ID(bp); config->hdr.reserved1 = 0; @@ -9271,6 +9327,18 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state) return 0; } +static inline int bnx2x_has_rx_work(struct bnx2x_fastpath *fp) +{ + u16 rx_cons_sb; + + /* Tell compiler that status block fields can change */ + barrier(); + rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); + if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) + rx_cons_sb++; + return (fp->rx_comp_cons != rx_cons_sb); +} + /* * net_device service functions */ @@ -9281,7 +9349,6 @@ static int bnx2x_poll(struct napi_struct *napi, int budget) napi); struct bnx2x *bp = fp->bp; int work_done = 0; - u16 rx_cons_sb; #ifdef BNX2X_STOP_ON_ERROR if (unlikely(bp->panic)) @@ -9294,19 +9361,12 @@ static int bnx2x_poll(struct napi_struct *napi, int budget) bnx2x_update_fpsb_idx(fp); - if (BNX2X_HAS_TX_WORK(fp)) + if (bnx2x_has_tx_work(fp)) bnx2x_tx_int(fp, budget); - rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); - if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) - rx_cons_sb++; - if (BNX2X_HAS_RX_WORK(fp)) + if (bnx2x_has_rx_work(fp)) work_done = bnx2x_rx_int(fp, budget); - rmb(); /* BNX2X_HAS_WORK() reads the status block */ - rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); - if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) - rx_cons_sb++; /* must not complete if we consumed full budget */ if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) { @@ -9417,6 +9477,7 @@ static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb) return rc; } +#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3) /* check if packet requires linearization (packet is too fragmented) */ static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb, u32 xmit_type) @@ -9494,6 +9555,7 @@ exit_lbl: return to_copy; } +#endif /* called with netif_tx_lock * bnx2x_tx_int() runs without netif_tx_lock unless it needs to call @@ -9534,6 +9596,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr, ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type); +#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3) /* First, check if we need to linearize the skb (due to FW restrictions) */ if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) { @@ -9546,6 +9609,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } } +#endif /* Please read carefully. First we use one BD which we mark as start, @@ -9776,6 +9840,8 @@ static int bnx2x_open(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); + netif_carrier_off(dev); + bnx2x_set_power_state(bp, PCI_D0); return bnx2x_nic_load(bp, LOAD_OPEN); @@ -9859,7 +9925,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev) for (; i < old; i++) { if (CAM_IS_INVALID(config-> config_table[i])) { - i--; /* already invalidated */ + /* already invalidated */ break; } /* invalidate */ @@ -10269,22 +10335,18 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, return rc; } - rc = register_netdev(dev); - if (rc) { - dev_err(&pdev->dev, "Cannot register net device\n"); - goto init_one_exit; - } - pci_set_drvdata(pdev, dev); rc = bnx2x_init_bp(bp); + if (rc) + goto init_one_exit; + + rc = register_netdev(dev); if (rc) { - unregister_netdev(dev); + dev_err(&pdev->dev, "Cannot register net device\n"); goto init_one_exit; } - netif_carrier_off(dev); - bp->common.name = board_info[ent->driver_data].name; printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx," " IRQ %d, ", dev->name, bp->common.name, @@ -10432,6 +10494,8 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp) bnx2x_free_skbs(bp); for_each_queue(bp, i) bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); + for_each_queue(bp, i) + netif_napi_del(&bnx2x_fp(bp, i, napi)); bnx2x_free_mem(bp); bp->state = BNX2X_STATE_CLOSED; diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index a67b0c358ae..d084e5fc4b5 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -1,6 +1,6 @@ /* bnx2x_reg.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2008 Broadcom Corporation + * Copyright (c) 2007-2009 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 14f9fb3e879..379a1324db4 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -2104,6 +2104,7 @@ static void init_lro_mgr(struct sge_qset *qs, struct net_lro_mgr *lro_mgr) { lro_mgr->dev = qs->netdev; lro_mgr->features = LRO_F_NAPI; + lro_mgr->frag_align_pad = NET_IP_ALIGN; lro_mgr->ip_summed = CHECKSUM_UNNECESSARY; lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY; lro_mgr->max_desc = T3_MAX_LRO_SES; diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 26474c92193..c986978ce76 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -31,7 +31,7 @@ char e1000_driver_name[] = "e1000"; static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; -#define DRV_VERSION "7.3.20-k3-NAPI" +#define DRV_VERSION "7.3.21-k3-NAPI" const char e1000_driver_version[] = DRV_VERSION; static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -3712,7 +3712,7 @@ static irqreturn_t e1000_intr(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 rctl, icr = er32(ICR); - if (unlikely(!icr)) + if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags))) return IRQ_NONE; /* Not our interrupt */ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index cf43ee743b3..0890162953e 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -981,11 +981,15 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) ew32(PBA_ECC, reg); } - /* PCI-Ex Control Register */ + /* PCI-Ex Control Registers */ if (hw->mac.type == e1000_82574) { reg = er32(GCR); reg |= (1 << 22); ew32(GCR, reg); + + reg = er32(GCR2); + reg |= 1; + ew32(GCR2, reg); } return; diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index f25e961c6b3..2d4ce0492df 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -206,6 +206,7 @@ enum e1e_registers { E1000_MANC2H = 0x05860, /* Management Control To Host - RW */ E1000_SW_FW_SYNC = 0x05B5C, /* Software-Firmware Synchronization - RW */ E1000_GCR = 0x05B00, /* PCI-Ex Control */ + E1000_GCR2 = 0x05B64, /* PCI-Ex Control #2 */ E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */ E1000_SWSM = 0x05B50, /* SW Semaphore */ E1000_FWSM = 0x05B54, /* FW Semaphore */ diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 7e33c129d51..2769083bfe8 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -1698,7 +1698,7 @@ static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_priva /* * Set MII speed to 2.5 MHz */ - fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2; + fep->phy_speed = (MCF_CLK / 3) / (2500000 * 2 ) * 2; fecp->fec_mii_speed = fep->phy_speed; fec_restart(dev, 0); diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index ea530673236..3f7eab42aef 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1423,15 +1423,11 @@ static void gfar_vlan_rx_register(struct net_device *dev, { struct gfar_private *priv = netdev_priv(dev); unsigned long flags; - struct vlan_group *old_grp; u32 tempval; spin_lock_irqsave(&priv->rxlock, flags); - old_grp = priv->vlgrp; - - if (old_grp == grp) - return; + priv->vlgrp = grp; if (grp) { /* Enable VLAN tag insertion */ diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c index f3706e415b4..f49a426ad68 100644 --- a/drivers/net/gianfar_mii.c +++ b/drivers/net/gianfar_mii.c @@ -234,6 +234,8 @@ static int gfar_mdio_probe(struct of_device *ofdev, if (NULL == new_bus) return -ENOMEM; + device_init_wakeup(&ofdev->dev, 1); + new_bus->name = "Gianfar MII Bus", new_bus->read = &gfar_mdio_read, new_bus->write = &gfar_mdio_write, diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index f5e2e7235fc..13ca73f96ec 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -699,11 +699,18 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) /* SGMII link check is done through the PCS register. */ if ((hw->phy.media_type != e1000_media_type_copper) || - (igb_sgmii_active_82575(hw))) + (igb_sgmii_active_82575(hw))) { ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed, &duplex); - else + /* + * Use this flag to determine if link needs to be checked or + * not. If we have link clear the flag so that we do not + * continue to check for link. + */ + hw->mac.get_link_status = !hw->mac.serdes_has_link; + } else { ret_val = igb_check_for_copper_link(hw); + } return ret_val; } diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h index 5a27825cc48..aebef8e48e7 100644 --- a/drivers/net/igb/igb.h +++ b/drivers/net/igb/igb.h @@ -300,11 +300,10 @@ struct igb_adapter { #define IGB_FLAG_HAS_MSI (1 << 0) #define IGB_FLAG_MSI_ENABLE (1 << 1) -#define IGB_FLAG_HAS_DCA (1 << 2) -#define IGB_FLAG_DCA_ENABLED (1 << 3) -#define IGB_FLAG_IN_NETPOLL (1 << 5) -#define IGB_FLAG_QUAD_PORT_A (1 << 6) -#define IGB_FLAG_NEED_CTX_IDX (1 << 7) +#define IGB_FLAG_DCA_ENABLED (1 << 2) +#define IGB_FLAG_IN_NETPOLL (1 << 3) +#define IGB_FLAG_QUAD_PORT_A (1 << 4) +#define IGB_FLAG_NEED_CTX_IDX (1 << 5) enum e1000_state_t { __IGB_TESTING, diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index b82b0fb2056..a50db5398fa 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -206,10 +206,11 @@ static int __init igb_init_module(void) global_quad_port_a = 0; - ret = pci_register_driver(&igb_driver); #ifdef CONFIG_IGB_DCA dca_register_notify(&dca_notifier); #endif + + ret = pci_register_driver(&igb_driver); return ret; } @@ -1156,11 +1157,10 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* set flags */ switch (hw->mac.type) { - case e1000_82576: case e1000_82575: - adapter->flags |= IGB_FLAG_HAS_DCA; adapter->flags |= IGB_FLAG_NEED_CTX_IDX; break; + case e1000_82576: default: break; } @@ -1310,8 +1310,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, goto err_register; #ifdef CONFIG_IGB_DCA - if ((adapter->flags & IGB_FLAG_HAS_DCA) && - (dca_add_requester(&pdev->dev) == 0)) { + if (dca_add_requester(&pdev->dev) == 0) { adapter->flags |= IGB_FLAG_DCA_ENABLED; dev_info(&pdev->dev, "DCA enabled\n"); /* Always use CB2 mode, difference is masked @@ -1835,11 +1834,11 @@ static void igb_setup_rctl(struct igb_adapter *adapter) rctl |= E1000_RCTL_SECRC; /* - * disable store bad packets, long packet enable, and clear size bits. + * disable store bad packets and clear size bits. */ - rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_LPE | E1000_RCTL_SZ_256); + rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256); - if (adapter->netdev->mtu > ETH_DATA_LEN) + /* enable LPE when to prevent packets larger than max_frame_size */ rctl |= E1000_RCTL_LPE; /* Setup buffer sizes */ @@ -1865,7 +1864,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter) */ /* allocations using alloc_page take too long for regular MTU * so only enable packet split for jumbo frames */ - if (rctl & E1000_RCTL_LPE) { + if (adapter->netdev->mtu > ETH_DATA_LEN) { adapter->rx_ps_hdr_size = IGB_RXBUFFER_128; srrctl |= adapter->rx_ps_hdr_size << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; @@ -3473,19 +3472,16 @@ static int __igb_notify_dca(struct device *dev, void *data) struct e1000_hw *hw = &adapter->hw; unsigned long event = *(unsigned long *)data; - if (!(adapter->flags & IGB_FLAG_HAS_DCA)) - goto out; - switch (event) { case DCA_PROVIDER_ADD: /* if already enabled, don't do it again */ if (adapter->flags & IGB_FLAG_DCA_ENABLED) break; - adapter->flags |= IGB_FLAG_DCA_ENABLED; /* Always use CB2 mode, difference is masked * in the CB driver. */ wr32(E1000_DCA_CTRL, 2); if (dca_add_requester(dev) == 0) { + adapter->flags |= IGB_FLAG_DCA_ENABLED; dev_info(&adapter->pdev->dev, "DCA enabled\n"); igb_setup_dca(adapter); break; @@ -3502,7 +3498,7 @@ static int __igb_notify_dca(struct device *dev, void *data) } break; } -out: + return 0; } diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index acef3c65cd2..d2f4d5f508b 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -318,6 +318,9 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN; rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN; + rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN); + rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN | + IXGBE_DCA_RXCTRL_DESC_HSRO_EN); IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl); rx_ring->cpu = cpu; } @@ -1741,6 +1744,32 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum); } +static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + /* add VID to filter table */ + hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true); +} + +static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + ixgbe_irq_disable(adapter); + + vlan_group_set_device(adapter->vlgrp, vid, NULL); + + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + ixgbe_irq_enable(adapter); + + /* remove VID from filter table */ + hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false); +} + static void ixgbe_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) { @@ -1760,6 +1789,7 @@ static void ixgbe_vlan_rx_register(struct net_device *netdev, ctrl |= IXGBE_VLNCTRL_VME; ctrl &= ~IXGBE_VLNCTRL_CFIEN; IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl); + ixgbe_vlan_rx_add_vid(netdev, 0); if (grp) { /* enable VLAN tag insert/strip */ @@ -1773,32 +1803,6 @@ static void ixgbe_vlan_rx_register(struct net_device *netdev, ixgbe_irq_enable(adapter); } -static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - - /* add VID to filter table */ - hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true); -} - -static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - - if (!test_bit(__IXGBE_DOWN, &adapter->state)) - ixgbe_irq_disable(adapter); - - vlan_group_set_device(adapter->vlgrp, vid, NULL); - - if (!test_bit(__IXGBE_DOWN, &adapter->state)) - ixgbe_irq_enable(adapter); - - /* remove VID from filter table */ - hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false); -} - static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter) { ixgbe_vlan_rx_register(adapter->netdev, adapter->vlgrp); @@ -2074,6 +2078,9 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) ixgbe_irq_enable(adapter); + /* enable transmits */ + netif_tx_start_all_queues(netdev); + /* bring the link up in the watchdog, this could race with our first * link up interrupt but shouldn't be a problem */ adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; @@ -3475,7 +3482,6 @@ static void ixgbe_watchdog_task(struct work_struct *work) (FLOW_TX ? "TX" : "None")))); netif_carrier_on(netdev); - netif_tx_wake_all_queues(netdev); } else { /* Force detection of hung controller */ adapter->detect_tx_hung = true; @@ -3487,7 +3493,6 @@ static void ixgbe_watchdog_task(struct work_struct *work) printk(KERN_INFO "ixgbe: %s NIC Link is Down\n", netdev->name); netif_carrier_off(netdev); - netif_tx_stop_all_queues(netdev); } } @@ -4218,7 +4223,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, } netif_carrier_off(netdev); - netif_tx_stop_all_queues(netdev); strcpy(netdev->name, "eth%d"); err = register_netdev(netdev); diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 83a11ff9ffd..f011c57c920 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -404,6 +404,9 @@ #define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */ #define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */ #define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */ +#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */ +#define IXGBE_DCA_RXCTRL_DESC_WRO_EN (1 << 13) /* DCA Rx wr Desc Relax Order */ +#define IXGBE_DCA_RXCTRL_DESC_HSRO_EN (1 << 15) /* DCA Rx Split Header RO */ #define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ #define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ diff --git a/drivers/net/korina.c b/drivers/net/korina.c index 1d6e48e1336..75010cac76a 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c @@ -416,6 +416,9 @@ static int korina_rx(struct net_device *dev, int limit) if (devcs & ETH_RX_MP) dev->stats.multicast++; + /* 16 bit align */ + skb_reserve(skb_new, 2); + lp->rx_skb[lp->rx_next_done] = skb_new; } @@ -740,6 +743,7 @@ static struct ethtool_ops netdev_ethtool_ops = { static void korina_alloc_ring(struct net_device *dev) { struct korina_private *lp = netdev_priv(dev); + struct sk_buff *skb; int i; /* Initialize the transmit descriptors */ @@ -755,8 +759,6 @@ static void korina_alloc_ring(struct net_device *dev) /* Initialize the receive descriptors */ for (i = 0; i < KORINA_NUM_RDS; i++) { - struct sk_buff *skb = lp->rx_skb[i]; - skb = dev_alloc_skb(KORINA_RBSIZE + 2); if (!skb) break; @@ -769,11 +771,12 @@ static void korina_alloc_ring(struct net_device *dev) lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]); } - /* loop back */ - lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]); - lp->rx_next_done = 0; + /* loop back receive descriptors, so the last + * descriptor points to the first one */ + lp->rd_ring[i - 1].link = CPHYSADDR(&lp->rd_ring[0]); + lp->rd_ring[i - 1].control |= DMA_DESC_COD; - lp->rd_ring[i].control |= DMA_DESC_COD; + lp->rx_next_done = 0; lp->rx_chain_head = 0; lp->rx_chain_tail = 0; lp->rx_chain_status = desc_empty; diff --git a/drivers/net/macb.c b/drivers/net/macb.c index a04da4ecaa8..f6c4936e2fa 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -321,6 +321,10 @@ static void macb_tx(struct macb *bp) printk(KERN_ERR "%s: TX underrun, resetting buffers\n", bp->dev->name); + /* Transfer ongoing, disable transmitter, to avoid confusion */ + if (status & MACB_BIT(TGO)) + macb_writel(bp, NCR, macb_readl(bp, NCR) & ~MACB_BIT(TE)); + head = bp->tx_head; /*Mark all the buffer as used to avoid sending a lost buffer*/ @@ -343,6 +347,10 @@ static void macb_tx(struct macb *bp) } bp->tx_head = bp->tx_tail = 0; + + /* Enable the transmitter again */ + if (status & MACB_BIT(TGO)) + macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TE)); } if (!(status & MACB_BIT(COMP))) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 7253a499d9c..5f31bbb614a 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -136,21 +136,23 @@ static char mv643xx_eth_driver_version[] = "1.4"; /* * SDMA configuration register. */ +#define RX_BURST_SIZE_4_64BIT (2 << 1) #define RX_BURST_SIZE_16_64BIT (4 << 1) #define BLM_RX_NO_SWAP (1 << 4) #define BLM_TX_NO_SWAP (1 << 5) +#define TX_BURST_SIZE_4_64BIT (2 << 22) #define TX_BURST_SIZE_16_64BIT (4 << 22) #if defined(__BIG_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - (RX_BURST_SIZE_16_64BIT | \ - TX_BURST_SIZE_16_64BIT) + (RX_BURST_SIZE_4_64BIT | \ + TX_BURST_SIZE_4_64BIT) #elif defined(__LITTLE_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - (RX_BURST_SIZE_16_64BIT | \ - BLM_RX_NO_SWAP | \ - BLM_TX_NO_SWAP | \ - TX_BURST_SIZE_16_64BIT) + (RX_BURST_SIZE_4_64BIT | \ + BLM_RX_NO_SWAP | \ + BLM_TX_NO_SWAP | \ + TX_BURST_SIZE_4_64BIT) #else #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined #endif @@ -1594,7 +1596,7 @@ oom: entry = addr_crc(a); } - table[entry >> 2] |= 1 << (entry & 3); + table[entry >> 2] |= 1 << (8 * (entry & 3)); } for (i = 0; i < 0x100; i += 4) { @@ -2210,6 +2212,7 @@ static int mv643xx_eth_stop(struct net_device *dev) struct mv643xx_eth_private *mp = netdev_priv(dev); int i; + wrlp(mp, INT_MASK_EXT, 0x00000000); wrlp(mp, INT_MASK, 0x00000000); rdlp(mp, INT_MASK); diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 6bb71b687f7..e9c1296b267 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -1,7 +1,7 @@ /************************************************************************* * myri10ge.c: Myricom Myri-10G Ethernet driver. * - * Copyright (C) 2005 - 2007 Myricom, Inc. + * Copyright (C) 2005 - 2009 Myricom, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.4.4-1.398" +#define MYRI10GE_VERSION_STR "1.4.4-1.401" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -3786,7 +3786,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (status != 0) { dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n", status); - goto abort_with_netdev; + goto abort_with_enabled; } pci_set_master(pdev); @@ -3801,13 +3801,13 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } if (status != 0) { dev_err(&pdev->dev, "Error %d setting DMA mask\n", status); - goto abort_with_netdev; + goto abort_with_enabled; } (void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd), &mgp->cmd_bus, GFP_KERNEL); if (mgp->cmd == NULL) - goto abort_with_netdev; + goto abort_with_enabled; mgp->board_span = pci_resource_len(pdev, 0); mgp->iomem_base = pci_resource_start(pdev, 0); @@ -3943,8 +3943,10 @@ abort_with_mtrr: dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd), mgp->cmd, mgp->cmd_bus); -abort_with_netdev: +abort_with_enabled: + pci_disable_device(pdev); +abort_with_netdev: free_netdev(netdev); return status; } @@ -3990,6 +3992,7 @@ static void myri10ge_remove(struct pci_dev *pdev) mgp->cmd, mgp->cmd_bus); free_netdev(netdev); + pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); } diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index c11c568fd7d..9c78c963b72 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -146,7 +146,7 @@ #define MAX_RX_BUFFER_LENGTH 1760 #define MAX_RX_JUMBO_BUFFER_LENGTH 8062 -#define MAX_RX_LRO_BUFFER_LENGTH ((48*1024)-512) +#define MAX_RX_LRO_BUFFER_LENGTH (8062) #define RX_DMA_MAP_LEN (MAX_RX_BUFFER_LENGTH - 2) #define RX_JUMBO_DMA_MAP_LEN \ (MAX_RX_JUMBO_BUFFER_LENGTH - 2) @@ -207,11 +207,11 @@ #define MAX_CMD_DESCRIPTORS 4096 #define MAX_RCV_DESCRIPTORS 16384 -#define MAX_CMD_DESCRIPTORS_HOST (MAX_CMD_DESCRIPTORS / 4) -#define MAX_RCV_DESCRIPTORS_1G (MAX_RCV_DESCRIPTORS / 4) -#define MAX_RCV_DESCRIPTORS_10G 8192 +#define MAX_CMD_DESCRIPTORS_HOST 1024 +#define MAX_RCV_DESCRIPTORS_1G 2048 +#define MAX_RCV_DESCRIPTORS_10G 4096 #define MAX_JUMBO_RCV_DESCRIPTORS 1024 -#define MAX_LRO_RCV_DESCRIPTORS 64 +#define MAX_LRO_RCV_DESCRIPTORS 8 #define MAX_RCVSTATUS_DESCRIPTORS MAX_RCV_DESCRIPTORS #define MAX_JUMBO_RCV_DESC MAX_JUMBO_RCV_DESCRIPTORS #define MAX_RCV_DESC MAX_RCV_DESCRIPTORS diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c index c0bd40fcf70..0894a7be022 100644 --- a/drivers/net/netxen/netxen_nic_ethtool.c +++ b/drivers/net/netxen/netxen_nic_ethtool.c @@ -561,7 +561,10 @@ netxen_nic_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring) } ring->tx_pending = adapter->max_tx_desc_count; - ring->rx_max_pending = MAX_RCV_DESCRIPTORS; + if (adapter->ahw.board_type == NETXEN_NIC_GBE) + ring->rx_max_pending = MAX_RCV_DESCRIPTORS_1G; + else + ring->rx_max_pending = MAX_RCV_DESCRIPTORS_10G; ring->tx_max_pending = MAX_CMD_DESCRIPTORS_HOST; ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS; ring->rx_mini_max_pending = 0; diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index ca7c8d8050c..ffd37bea162 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -947,8 +947,10 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) } for (i = 0; i < n; i++) { if (netxen_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 || - netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) + netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) { + kfree(buf); return -EIO; + } buf[i].addr = addr; buf[i].data = val; diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index d854f07ef4d..645d384fe87 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -735,17 +735,18 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops); - /* ScatterGather support */ - netdev->features = NETIF_F_SG; - netdev->features |= NETIF_F_IP_CSUM; - netdev->features |= NETIF_F_TSO; + netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO); + netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO); + if (NX_IS_REVISION_P3(revision_id)) { - netdev->features |= NETIF_F_IPV6_CSUM; - netdev->features |= NETIF_F_TSO6; + netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6); + netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6); } - if (adapter->pci_using_dac) + if (adapter->pci_using_dac) { netdev->features |= NETIF_F_HIGHDMA; + netdev->vlan_features |= NETIF_F_HIGHDMA; + } /* * Set the CRB window to invalid. If any register in window 0 is @@ -1166,6 +1167,14 @@ static bool netxen_tso_check(struct net_device *netdev, { bool tso = false; u8 opcode = TX_ETHER_PKT; + __be16 protocol = skb->protocol; + u16 flags = 0; + + if (protocol == __constant_htons(ETH_P_8021Q)) { + struct vlan_ethhdr *vh = (struct vlan_ethhdr *)skb->data; + protocol = vh->h_vlan_encapsulated_proto; + flags = FLAGS_VLAN_TAGGED; + } if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) && skb_shinfo(skb)->gso_size > 0) { @@ -1174,21 +1183,21 @@ static bool netxen_tso_check(struct net_device *netdev, desc->total_hdr_length = skb_transport_offset(skb) + tcp_hdrlen(skb); - opcode = (skb->protocol == htons(ETH_P_IPV6)) ? + opcode = (protocol == __constant_htons(ETH_P_IPV6)) ? TX_TCP_LSO6 : TX_TCP_LSO; tso = true; } else if (skb->ip_summed == CHECKSUM_PARTIAL) { u8 l4proto; - if (skb->protocol == htons(ETH_P_IP)) { + if (protocol == __constant_htons(ETH_P_IP)) { l4proto = ip_hdr(skb)->protocol; if (l4proto == IPPROTO_TCP) opcode = TX_TCP_PKT; else if(l4proto == IPPROTO_UDP) opcode = TX_UDP_PKT; - } else if (skb->protocol == htons(ETH_P_IPV6)) { + } else if (protocol == __constant_htons(ETH_P_IPV6)) { l4proto = ipv6_hdr(skb)->nexthdr; if (l4proto == IPPROTO_TCP) @@ -1199,7 +1208,7 @@ static bool netxen_tso_check(struct net_device *netdev, } desc->tcp_hdr_offset = skb_transport_offset(skb); desc->ip_hdr_offset = skb_network_offset(skb); - netxen_set_tx_flags_opcode(desc, 0, opcode); + netxen_set_tx_flags_opcode(desc, flags, opcode); return tso; } diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 11adf6ed462..811a637695c 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -296,9 +296,8 @@ static int mdio_bus_suspend(struct device * dev, pm_message_t state) struct phy_driver *phydrv = to_phy_driver(drv); struct phy_device *phydev = to_phy_device(dev); - if ((!device_may_wakeup(phydev->dev.parent)) && - (phydrv && phydrv->suspend)) - ret = phydrv->suspend(phydev); + if (drv && phydrv->suspend && !device_may_wakeup(phydev->dev.parent)) + ret = phydrv->suspend(phydev); return ret; } @@ -310,8 +309,7 @@ static int mdio_bus_resume(struct device * dev) struct phy_driver *phydrv = to_phy_driver(drv); struct phy_device *phydev = to_phy_device(dev); - if ((!device_may_wakeup(phydev->dev.parent)) && - (phydrv && phydrv->resume)) + if (drv && phydrv->resume && !device_may_wakeup(phydev->dev.parent)) ret = phydrv->resume(phydev); return ret; diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index c05d38d4635..1387187543e 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -81,6 +81,9 @@ static struct phy_driver lan83c185_driver = { .ack_interrupt = smsc_phy_ack_interrupt, .config_intr = smsc_phy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE, } }; @@ -102,6 +105,9 @@ static struct phy_driver lan8187_driver = { .ack_interrupt = smsc_phy_ack_interrupt, .config_intr = smsc_phy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE, } }; @@ -123,6 +129,9 @@ static struct phy_driver lan8700_driver = { .ack_interrupt = smsc_phy_ack_interrupt, .config_intr = smsc_phy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE, } }; @@ -144,6 +153,9 @@ static struct phy_driver lan911x_int_driver = { .ack_interrupt = smsc_phy_ack_interrupt, .config_intr = smsc_phy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE, } }; diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 72fd9e97c19..b2dcdb5ed8b 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -438,7 +438,6 @@ static void r6040_down(struct net_device *dev) { struct r6040_private *lp = netdev_priv(dev); void __iomem *ioaddr = lp->base; - struct pci_dev *pdev = lp->pdev; int limit = 2048; u16 *adrp; u16 cmd; diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 7673fd92eaf..ab0e09bf154 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -676,9 +676,8 @@ static int efx_init_port(struct efx_nic *efx) rc = efx->phy_op->init(efx); if (rc) return rc; - efx->phy_op->reconfigure(efx); - mutex_lock(&efx->mac_lock); + efx->phy_op->reconfigure(efx); rc = falcon_switch_mac(efx); mutex_unlock(&efx->mac_lock); if (rc) @@ -686,7 +685,7 @@ static int efx_init_port(struct efx_nic *efx) efx->mac_op->reconfigure(efx); efx->port_initialized = true; - efx->stats_enabled = true; + efx_stats_enable(efx); return 0; fail: @@ -735,6 +734,7 @@ static void efx_fini_port(struct efx_nic *efx) if (!efx->port_initialized) return; + efx_stats_disable(efx); efx->phy_op->fini(efx); efx->port_initialized = false; @@ -1361,6 +1361,20 @@ static int efx_net_stop(struct net_device *net_dev) return 0; } +void efx_stats_disable(struct efx_nic *efx) +{ + spin_lock(&efx->stats_lock); + ++efx->stats_disable_count; + spin_unlock(&efx->stats_lock); +} + +void efx_stats_enable(struct efx_nic *efx) +{ + spin_lock(&efx->stats_lock); + --efx->stats_disable_count; + spin_unlock(&efx->stats_lock); +} + /* Context: process, dev_base_lock or RTNL held, non-blocking. */ static struct net_device_stats *efx_net_stats(struct net_device *net_dev) { @@ -1369,12 +1383,12 @@ static struct net_device_stats *efx_net_stats(struct net_device *net_dev) struct net_device_stats *stats = &net_dev->stats; /* Update stats if possible, but do not wait if another thread - * is updating them (or resetting the NIC); slightly stale - * stats are acceptable. + * is updating them or if MAC stats fetches are temporarily + * disabled; slightly stale stats are acceptable. */ if (!spin_trylock(&efx->stats_lock)) return stats; - if (efx->stats_enabled) { + if (!efx->stats_disable_count) { efx->mac_op->update_stats(efx); falcon_update_nic_stats(efx); } @@ -1622,16 +1636,12 @@ static void efx_unregister_netdev(struct efx_nic *efx) /* Tears down the entire software state and most of the hardware state * before reset. */ -void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) +void efx_reset_down(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd) { EFX_ASSERT_RESET_SERIALISED(efx); - /* The net_dev->get_stats handler is quite slow, and will fail - * if a fetch is pending over reset. Serialise against it. */ - spin_lock(&efx->stats_lock); - efx->stats_enabled = false; - spin_unlock(&efx->stats_lock); - + efx_stats_disable(efx); efx_stop_all(efx); mutex_lock(&efx->mac_lock); mutex_lock(&efx->spi_lock); @@ -1639,6 +1649,8 @@ void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) efx->phy_op->get_settings(efx, ecmd); efx_fini_channels(efx); + if (efx->port_initialized && method != RESET_TYPE_INVISIBLE) + efx->phy_op->fini(efx); } /* This function will always ensure that the locks acquired in @@ -1646,7 +1658,8 @@ void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd) * that we were unable to reinitialise the hardware, and the * driver should be disabled. If ok is false, then the rx and tx * engines are not restarted, pending a RESET_DISABLE. */ -int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok) +int efx_reset_up(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd, bool ok) { int rc; @@ -1658,6 +1671,15 @@ int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok) ok = false; } + if (efx->port_initialized && method != RESET_TYPE_INVISIBLE) { + if (ok) { + rc = efx->phy_op->init(efx); + if (rc) + ok = false; + } else + efx->port_initialized = false; + } + if (ok) { efx_init_channels(efx); @@ -1670,7 +1692,7 @@ int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, bool ok) if (ok) { efx_start_all(efx); - efx->stats_enabled = true; + efx_stats_enable(efx); } return rc; } @@ -1702,7 +1724,7 @@ static int efx_reset(struct efx_nic *efx) EFX_INFO(efx, "resetting (%d)\n", method); - efx_reset_down(efx, &ecmd); + efx_reset_down(efx, method, &ecmd); rc = falcon_reset_hw(efx, method); if (rc) { @@ -1721,10 +1743,10 @@ static int efx_reset(struct efx_nic *efx) /* Leave device stopped if necessary */ if (method == RESET_TYPE_DISABLE) { - efx_reset_up(efx, &ecmd, false); + efx_reset_up(efx, method, &ecmd, false); rc = -EIO; } else { - rc = efx_reset_up(efx, &ecmd, true); + rc = efx_reset_up(efx, method, &ecmd, true); } out_disable: @@ -1876,6 +1898,7 @@ static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type, efx->rx_checksum_enabled = true; spin_lock_init(&efx->netif_stop_lock); spin_lock_init(&efx->stats_lock); + efx->stats_disable_count = 1; mutex_init(&efx->mac_lock); efx->mac_op = &efx_dummy_mac_operations; efx->phy_op = &efx_dummy_phy_operations; diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h index 0dd7a532c78..55d0f131b0e 100644 --- a/drivers/net/sfc/efx.h +++ b/drivers/net/sfc/efx.h @@ -36,13 +36,16 @@ extern void efx_process_channel_now(struct efx_channel *channel); extern void efx_flush_queues(struct efx_nic *efx); /* Ports */ +extern void efx_stats_disable(struct efx_nic *efx); +extern void efx_stats_enable(struct efx_nic *efx); extern void efx_reconfigure_port(struct efx_nic *efx); extern void __efx_reconfigure_port(struct efx_nic *efx); /* Reset handling */ -extern void efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd); -extern int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd, - bool ok); +extern void efx_reset_down(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd); +extern int efx_reset_up(struct efx_nic *efx, enum reset_type method, + struct ethtool_cmd *ecmd, bool ok); /* Global */ extern void efx_schedule_reset(struct efx_nic *efx, enum reset_type type); diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c index 53d259e9018..7b5924c039b 100644 --- a/drivers/net/sfc/ethtool.c +++ b/drivers/net/sfc/ethtool.c @@ -219,9 +219,6 @@ int efx_ethtool_set_settings(struct net_device *net_dev, struct efx_nic *efx = netdev_priv(net_dev); int rc; - if (EFX_WORKAROUND_13963(efx) && !ecmd->autoneg) - return -EINVAL; - /* Falcon GMAC does not support 1000Mbps HD */ if (ecmd->speed == SPEED_1000 && ecmd->duplex != DUPLEX_FULL) { EFX_LOG(efx, "rejecting unsupported 1000Mbps HD" diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 5b9f2d9cc4e..d5378e60fcd 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -824,10 +824,6 @@ static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue, rx_ev_pause_frm ? " [PAUSE]" : ""); } #endif - - if (unlikely(rx_ev_eth_crc_err && EFX_WORKAROUND_10750(efx) && - efx->phy_type == PHY_TYPE_SFX7101)) - tenxpress_crc_err(efx); } /* Handle receive events that are not in-order. */ @@ -1887,7 +1883,7 @@ static int falcon_reset_macs(struct efx_nic *efx) /* MAC stats will fail whilst the TX fifo is draining. Serialise * the drain sequence with the statistics fetch */ - spin_lock(&efx->stats_lock); + efx_stats_disable(efx); falcon_read(efx, ®, MAC0_CTRL_REG_KER); EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0, 1); @@ -1917,7 +1913,7 @@ static int falcon_reset_macs(struct efx_nic *efx) udelay(10); } - spin_unlock(&efx->stats_lock); + efx_stats_enable(efx); /* If we've reset the EM block and the link is up, then * we'll have to kick the XAUI link so the PHY can recover */ @@ -2277,6 +2273,10 @@ int falcon_switch_mac(struct efx_nic *efx) struct efx_mac_operations *old_mac_op = efx->mac_op; efx_oword_t nic_stat; unsigned strap_val; + int rc = 0; + + /* Don't try to fetch MAC stats while we're switching MACs */ + efx_stats_disable(efx); /* Internal loopbacks override the phy speed setting */ if (efx->loopback_mode == LOOPBACK_GMAC) { @@ -2287,16 +2287,12 @@ int falcon_switch_mac(struct efx_nic *efx) efx->link_fd = true; } + WARN_ON(!mutex_is_locked(&efx->mac_lock)); efx->mac_op = (EFX_IS10G(efx) ? &falcon_xmac_operations : &falcon_gmac_operations); - if (old_mac_op == efx->mac_op) - return 0; - - WARN_ON(!mutex_is_locked(&efx->mac_lock)); - - /* Not all macs support a mac-level link state */ - efx->mac_up = true; + /* Always push the NIC_STAT_REG setting even if the mac hasn't + * changed, because this function is run post online reset */ falcon_read(efx, &nic_stat, NIC_STAT_REG); strap_val = EFX_IS10G(efx) ? 5 : 3; if (falcon_rev(efx) >= FALCON_REV_B0) { @@ -2309,9 +2305,17 @@ int falcon_switch_mac(struct efx_nic *efx) BUG_ON(EFX_OWORD_FIELD(nic_stat, STRAP_PINS) != strap_val); } + if (old_mac_op == efx->mac_op) + goto out; EFX_LOG(efx, "selected %cMAC\n", EFX_IS10G(efx) ? 'X' : 'G'); - return falcon_reset_macs(efx); + /* Not all macs support a mac-level link state */ + efx->mac_up = true; + + rc = falcon_reset_macs(efx); +out: + efx_stats_enable(efx); + return rc; } /* This call is responsible for hooking in the MAC and PHY operations */ diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c index f6a16428113..f9e2f95c3b4 100644 --- a/drivers/net/sfc/mdio_10g.c +++ b/drivers/net/sfc/mdio_10g.c @@ -15,6 +15,7 @@ #include "net_driver.h" #include "mdio_10g.h" #include "boards.h" +#include "workarounds.h" int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd, int spins, int spintime) @@ -179,17 +180,12 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask) return false; else if (efx_phy_mode_disabled(efx->phy_mode)) return false; - else if (efx->loopback_mode == LOOPBACK_PHYXS) { + else if (efx->loopback_mode == LOOPBACK_PHYXS) mmd_mask &= ~(MDIO_MMDREG_DEVS_PHYXS | MDIO_MMDREG_DEVS_PCS | MDIO_MMDREG_DEVS_PMAPMD | MDIO_MMDREG_DEVS_AN); - if (!mmd_mask) { - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS, - MDIO_PHYXS_STATUS2); - return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN)); - } - } else if (efx->loopback_mode == LOOPBACK_PCS) + else if (efx->loopback_mode == LOOPBACK_PCS) mmd_mask &= ~(MDIO_MMDREG_DEVS_PCS | MDIO_MMDREG_DEVS_PMAPMD | MDIO_MMDREG_DEVS_AN); @@ -197,6 +193,13 @@ bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask) mmd_mask &= ~(MDIO_MMDREG_DEVS_PMAPMD | MDIO_MMDREG_DEVS_AN); + if (!mmd_mask) { + /* Use presence of XGMII faults in leui of link state */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS, + MDIO_PHYXS_STATUS2); + return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN)); + } + while (mmd_mask) { if (mmd_mask & 1) { /* Double reads because link state is latched, and a @@ -263,7 +266,7 @@ void mdio_clause45_set_mmds_lpower(struct efx_nic *efx, } } -static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp) +static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr) { int phy_id = efx->mii.phy_id; u32 result = 0; @@ -278,9 +281,6 @@ static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp) result |= ADVERTISED_100baseT_Half; if (reg & ADVERTISE_100FULL) result |= ADVERTISED_100baseT_Full; - if (reg & LPA_RESV) - result |= xnp; - return result; } @@ -310,7 +310,7 @@ void mdio_clause45_get_settings(struct efx_nic *efx, */ void mdio_clause45_get_settings_ext(struct efx_nic *efx, struct ethtool_cmd *ecmd, - u32 xnp, u32 xnp_lpa) + u32 npage_adv, u32 npage_lpa) { int phy_id = efx->mii.phy_id; int reg; @@ -361,8 +361,8 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx, ecmd->autoneg = AUTONEG_ENABLE; ecmd->advertising |= ADVERTISED_Autoneg | - mdio_clause45_get_an(efx, - MDIO_AN_ADVERTISE, xnp); + mdio_clause45_get_an(efx, MDIO_AN_ADVERTISE) | + npage_adv; } else ecmd->autoneg = AUTONEG_DISABLE; } else @@ -371,27 +371,30 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx, if (ecmd->autoneg) { /* If AN is complete, report best common mode, * otherwise report best advertised mode. */ - u32 common = ecmd->advertising; + u32 modes = 0; if (mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_STAT1) & - (1 << MDIO_AN_STATUS_AN_DONE_LBN)) { - common &= mdio_clause45_get_an(efx, MDIO_AN_LPA, - xnp_lpa); - } - if (common & ADVERTISED_10000baseT_Full) { + (1 << MDIO_AN_STATUS_AN_DONE_LBN)) + modes = (ecmd->advertising & + (mdio_clause45_get_an(efx, MDIO_AN_LPA) | + npage_lpa)); + if (modes == 0) + modes = ecmd->advertising; + + if (modes & ADVERTISED_10000baseT_Full) { ecmd->speed = SPEED_10000; ecmd->duplex = DUPLEX_FULL; - } else if (common & (ADVERTISED_1000baseT_Full | - ADVERTISED_1000baseT_Half)) { + } else if (modes & (ADVERTISED_1000baseT_Full | + ADVERTISED_1000baseT_Half)) { ecmd->speed = SPEED_1000; - ecmd->duplex = !!(common & ADVERTISED_1000baseT_Full); - } else if (common & (ADVERTISED_100baseT_Full | - ADVERTISED_100baseT_Half)) { + ecmd->duplex = !!(modes & ADVERTISED_1000baseT_Full); + } else if (modes & (ADVERTISED_100baseT_Full | + ADVERTISED_100baseT_Half)) { ecmd->speed = SPEED_100; - ecmd->duplex = !!(common & ADVERTISED_100baseT_Full); + ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full); } else { ecmd->speed = SPEED_10; - ecmd->duplex = !!(common & ADVERTISED_10baseT_Full); + ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full); } } else { /* Report forced settings */ @@ -415,7 +418,7 @@ int mdio_clause45_set_settings(struct efx_nic *efx, int phy_id = efx->mii.phy_id; struct ethtool_cmd prev; u32 required; - int ctrl1_bits, reg; + int reg; efx->phy_op->get_settings(efx, &prev); @@ -430,99 +433,83 @@ int mdio_clause45_set_settings(struct efx_nic *efx, if (prev.port != PORT_TP || ecmd->port != PORT_TP) return -EINVAL; - /* Check that PHY supports these settings and work out the - * basic control bits */ - if (ecmd->duplex) { + /* Check that PHY supports these settings */ + if (ecmd->autoneg) { + required = SUPPORTED_Autoneg; + } else if (ecmd->duplex) { switch (ecmd->speed) { - case SPEED_10: - ctrl1_bits = BMCR_FULLDPLX; - required = SUPPORTED_10baseT_Full; - break; - case SPEED_100: - ctrl1_bits = BMCR_SPEED100 | BMCR_FULLDPLX; - required = SUPPORTED_100baseT_Full; - break; - case SPEED_1000: - ctrl1_bits = BMCR_SPEED1000 | BMCR_FULLDPLX; - required = SUPPORTED_1000baseT_Full; - break; - case SPEED_10000: - ctrl1_bits = (BMCR_SPEED1000 | BMCR_SPEED100 | - BMCR_FULLDPLX); - required = SUPPORTED_10000baseT_Full; - break; - default: - return -EINVAL; + case SPEED_10: required = SUPPORTED_10baseT_Full; break; + case SPEED_100: required = SUPPORTED_100baseT_Full; break; + default: return -EINVAL; } } else { switch (ecmd->speed) { - case SPEED_10: - ctrl1_bits = 0; - required = SUPPORTED_10baseT_Half; - break; - case SPEED_100: - ctrl1_bits = BMCR_SPEED100; - required = SUPPORTED_100baseT_Half; - break; - case SPEED_1000: - ctrl1_bits = BMCR_SPEED1000; - required = SUPPORTED_1000baseT_Half; - break; - default: - return -EINVAL; + case SPEED_10: required = SUPPORTED_10baseT_Half; break; + case SPEED_100: required = SUPPORTED_100baseT_Half; break; + default: return -EINVAL; } } - if (ecmd->autoneg) - required |= SUPPORTED_Autoneg; required |= ecmd->advertising; if (required & ~prev.supported) return -EINVAL; - /* Set the basic control bits */ - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, - MDIO_MMDREG_CTRL1); - reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | 0x003c); - reg |= ctrl1_bits; - mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL1, - reg); - - /* Set the AN registers */ - if (ecmd->autoneg != prev.autoneg || - ecmd->advertising != prev.advertising) { - bool xnp = false; - - if (efx->phy_op->set_xnp_advertise) - xnp = efx->phy_op->set_xnp_advertise(efx, - ecmd->advertising); - - if (ecmd->autoneg) { - reg = 0; - if (ecmd->advertising & ADVERTISED_10baseT_Half) - reg |= ADVERTISE_10HALF; - if (ecmd->advertising & ADVERTISED_10baseT_Full) - reg |= ADVERTISE_10FULL; - if (ecmd->advertising & ADVERTISED_100baseT_Half) - reg |= ADVERTISE_100HALF; - if (ecmd->advertising & ADVERTISED_100baseT_Full) - reg |= ADVERTISE_100FULL; - if (xnp) - reg |= ADVERTISE_RESV; - mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, - MDIO_AN_ADVERTISE, reg); - } + if (ecmd->autoneg) { + bool xnp = (ecmd->advertising & ADVERTISED_10000baseT_Full + || EFX_WORKAROUND_13204(efx)); + + /* Set up the base page */ + reg = ADVERTISE_CSMA; + if (ecmd->advertising & ADVERTISED_10baseT_Half) + reg |= ADVERTISE_10HALF; + if (ecmd->advertising & ADVERTISED_10baseT_Full) + reg |= ADVERTISE_10FULL; + if (ecmd->advertising & ADVERTISED_100baseT_Half) + reg |= ADVERTISE_100HALF; + if (ecmd->advertising & ADVERTISED_100baseT_Full) + reg |= ADVERTISE_100FULL; + if (xnp) + reg |= ADVERTISE_RESV; + else if (ecmd->advertising & (ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseT_Full)) + reg |= ADVERTISE_NPAGE; + reg |= efx_fc_advertise(efx->wanted_fc); + mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_ADVERTISE, reg); + + /* Set up the (extended) next page if necessary */ + if (efx->phy_op->set_npage_adv) + efx->phy_op->set_npage_adv(efx, ecmd->advertising); + /* Enable and restart AN */ reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_CTRL1); - if (ecmd->autoneg) - reg |= BMCR_ANENABLE | BMCR_ANRESTART; - else - reg &= ~BMCR_ANENABLE; + reg |= BMCR_ANENABLE; + if (!(EFX_WORKAROUND_15195(efx) && + LOOPBACK_MASK(efx) & efx->phy_op->loopbacks)) + reg |= BMCR_ANRESTART; if (xnp) reg |= 1 << MDIO_AN_CTRL_XNP_LBN; else reg &= ~(1 << MDIO_AN_CTRL_XNP_LBN); mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, MDIO_MMDREG_CTRL1, reg); + } else { + /* Disable AN */ + mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN, + MDIO_MMDREG_CTRL1, + __ffs(BMCR_ANENABLE), false); + + /* Set the basic control bits */ + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_MMDREG_CTRL1); + reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | + 0x003c); + if (ecmd->speed == SPEED_100) + reg |= BMCR_SPEED100; + if (ecmd->duplex) + reg |= BMCR_FULLDPLX; + mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, + MDIO_MMDREG_CTRL1, reg); } return 0; diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h index 09bf801d056..8ba49773ce7 100644 --- a/drivers/net/sfc/mdio_10g.h +++ b/drivers/net/sfc/mdio_10g.h @@ -155,7 +155,8 @@ #define MDIO_AN_XNP 22 #define MDIO_AN_LPA_XNP 25 -#define MDIO_AN_10GBT_ADVERTISE 32 +#define MDIO_AN_10GBT_CTRL 32 +#define MDIO_AN_10GBT_CTRL_ADV_10G_LBN 12 #define MDIO_AN_10GBT_STATUS (33) #define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */ #define MDIO_AN_10GBT_STATUS_MS_LBN (14) /* MASTER/SLAVE config */ diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 5f255f75754..e019ad1fb9a 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -566,7 +566,7 @@ struct efx_mac_operations { * @poll: Poll for hardware state. Serialised by the mac_lock. * @get_settings: Get ethtool settings. Serialised by the mac_lock. * @set_settings: Set ethtool settings. Serialised by the mac_lock. - * @set_xnp_advertise: Set abilities advertised in Extended Next Page + * @set_npage_adv: Set abilities advertised in (Extended) Next Page * (only needed where AN bit is set in mmds) * @num_tests: Number of PHY-specific tests/results * @test_names: Names of the tests/results @@ -586,7 +586,7 @@ struct efx_phy_operations { struct ethtool_cmd *ecmd); int (*set_settings) (struct efx_nic *efx, struct ethtool_cmd *ecmd); - bool (*set_xnp_advertise) (struct efx_nic *efx, u32); + void (*set_npage_adv) (struct efx_nic *efx, u32); u32 num_tests; const char *const *test_names; int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags); @@ -754,8 +754,7 @@ union efx_multicast_hash { * &struct net_device_stats. * @stats_buffer: DMA buffer for statistics * @stats_lock: Statistics update lock. Serialises statistics fetches - * @stats_enabled: Temporarily disable statistics fetches. - * Serialised by @stats_lock + * @stats_disable_count: Nest count for disabling statistics fetches * @mac_op: MAC interface * @mac_address: Permanent MAC address * @phy_type: PHY type @@ -837,7 +836,7 @@ struct efx_nic { struct efx_mac_stats mac_stats; struct efx_buffer stats_buffer; spinlock_t stats_lock; - bool stats_enabled; + unsigned int stats_disable_count; struct efx_mac_operations *mac_op; unsigned char mac_address[ETH_ALEN]; diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h index 58c493ef81b..07e855c148b 100644 --- a/drivers/net/sfc/phy.h +++ b/drivers/net/sfc/phy.h @@ -17,7 +17,6 @@ extern struct efx_phy_operations falcon_sfx7101_phy_ops; extern struct efx_phy_operations falcon_sft9001_phy_ops; extern void tenxpress_phy_blink(struct efx_nic *efx, bool blink); -extern void tenxpress_crc_err(struct efx_nic *efx); /**************************************************************************** * Exported functions from the driver for XFP optical PHYs diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c index dba0d64d50c..0a598084c51 100644 --- a/drivers/net/sfc/selftest.c +++ b/drivers/net/sfc/selftest.c @@ -665,6 +665,7 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests, { enum efx_loopback_mode loopback_mode = efx->loopback_mode; int phy_mode = efx->phy_mode; + enum reset_type reset_method = RESET_TYPE_INVISIBLE; struct ethtool_cmd ecmd; struct efx_channel *channel; int rc_test = 0, rc_reset = 0, rc; @@ -718,21 +719,21 @@ int efx_selftest(struct efx_nic *efx, struct efx_self_tests *tests, mutex_unlock(&efx->mac_lock); /* free up all consumers of SRAM (including all the queues) */ - efx_reset_down(efx, &ecmd); + efx_reset_down(efx, reset_method, &ecmd); rc = efx_test_chip(efx, tests); if (rc && !rc_test) rc_test = rc; /* reset the chip to recover from the register test */ - rc_reset = falcon_reset_hw(efx, RESET_TYPE_ALL); + rc_reset = falcon_reset_hw(efx, reset_method); /* Ensure that the phy is powered and out of loopback * for the bist and loopback tests */ efx->phy_mode &= ~PHY_MODE_LOW_POWER; efx->loopback_mode = LOOPBACK_NONE; - rc = efx_reset_up(efx, &ecmd, rc_reset == 0); + rc = efx_reset_up(efx, reset_method, &ecmd, rc_reset == 0); if (rc && !rc_reset) rc_reset = rc; diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index 16b80acb999..cb25ae5b257 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -186,19 +186,22 @@ static int sfn4111t_reset(struct efx_nic *efx) { efx_oword_t reg; - /* GPIO pins are also used for I2C, so block that temporarily */ + /* GPIO 3 and the GPIO register are shared with I2C, so block that */ mutex_lock(&efx->i2c_adap.bus_lock); + /* Pull RST_N (GPIO 2) low then let it up again, setting the + * FLASH_CFG_1 strap (GPIO 3) appropriately. Only change the + * output enables; the output levels should always be 0 (low) + * and we rely on external pull-ups. */ falcon_read(efx, ®, GPIO_CTL_REG_KER); EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, true); - EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, false); falcon_write(efx, ®, GPIO_CTL_REG_KER); msleep(1000); - EFX_SET_OWORD_FIELD(reg, GPIO2_OUT, true); - EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, true); - EFX_SET_OWORD_FIELD(reg, GPIO3_OUT, - !(efx->phy_mode & PHY_MODE_SPECIAL)); + EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, false); + EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, + !!(efx->phy_mode & PHY_MODE_SPECIAL)); falcon_write(efx, ®, GPIO_CTL_REG_KER); + msleep(1); mutex_unlock(&efx->i2c_adap.bus_lock); @@ -232,12 +235,18 @@ static ssize_t set_phy_flash_cfg(struct device *dev, } else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) { err = -EBUSY; } else { + /* Reset the PHY, reconfigure the MAC and enable/disable + * MAC stats accordingly. */ efx->phy_mode = new_mode; + if (new_mode & PHY_MODE_SPECIAL) + efx_stats_disable(efx); if (efx->board_info.type == EFX_BOARD_SFE4001) err = sfe4001_poweron(efx); else err = sfn4111t_reset(efx); efx_reconfigure_port(efx); + if (!(new_mode & PHY_MODE_SPECIAL)) + efx_stats_enable(efx); } rtnl_unlock(); @@ -326,6 +335,11 @@ int sfe4001_init(struct efx_nic *efx) efx->board_info.monitor = sfe4001_check_hw; efx->board_info.fini = sfe4001_fini; + if (efx->phy_mode & PHY_MODE_SPECIAL) { + /* PHY won't generate a 156.25 MHz clock and MAC stats fetch + * will fail. */ + efx_stats_disable(efx); + } rc = sfe4001_poweron(efx); if (rc) goto fail_ioexp; @@ -372,17 +386,25 @@ static void sfn4111t_fini(struct efx_nic *efx) i2c_unregister_device(efx->board_info.hwmon_client); } -static struct i2c_board_info sfn4111t_hwmon_info = { +static struct i2c_board_info sfn4111t_a0_hwmon_info = { I2C_BOARD_INFO("max6647", 0x4e), .irq = -1, }; +static struct i2c_board_info sfn4111t_r5_hwmon_info = { + I2C_BOARD_INFO("max6646", 0x4d), + .irq = -1, +}; + int sfn4111t_init(struct efx_nic *efx) { int rc; efx->board_info.hwmon_client = - i2c_new_device(&efx->i2c_adap, &sfn4111t_hwmon_info); + i2c_new_device(&efx->i2c_adap, + (efx->board_info.minor < 5) ? + &sfn4111t_a0_hwmon_info : + &sfn4111t_r5_hwmon_info); if (!efx->board_info.hwmon_client) return -EIO; @@ -394,8 +416,10 @@ int sfn4111t_init(struct efx_nic *efx) if (rc) goto fail_hwmon; - if (efx->phy_mode & PHY_MODE_SPECIAL) + if (efx->phy_mode & PHY_MODE_SPECIAL) { + efx_stats_disable(efx); sfn4111t_reset(efx); + } return 0; diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index 9ecb77da954..f0efd246962 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -67,6 +67,8 @@ #define PMA_PMD_EXT_CLK312_WIDTH 1 #define PMA_PMD_EXT_LPOWER_LBN 12 #define PMA_PMD_EXT_LPOWER_WIDTH 1 +#define PMA_PMD_EXT_ROBUST_LBN 14 +#define PMA_PMD_EXT_ROBUST_WIDTH 1 #define PMA_PMD_EXT_SSR_LBN 15 #define PMA_PMD_EXT_SSR_WIDTH 1 @@ -177,35 +179,24 @@ #define C22EXT_STATUS_LINK_LBN 2 #define C22EXT_STATUS_LINK_WIDTH 1 -#define C22EXT_MSTSLV_REG 49162 -#define C22EXT_MSTSLV_1000_HD_LBN 10 -#define C22EXT_MSTSLV_1000_HD_WIDTH 1 -#define C22EXT_MSTSLV_1000_FD_LBN 11 -#define C22EXT_MSTSLV_1000_FD_WIDTH 1 +#define C22EXT_MSTSLV_CTRL 49161 +#define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN 8 +#define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN 9 + +#define C22EXT_MSTSLV_STATUS 49162 +#define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN 10 +#define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN 11 /* Time to wait between powering down the LNPGA and turning off the power * rails */ #define LNPGA_PDOWN_WAIT (HZ / 5) -static int crc_error_reset_threshold = 100; -module_param(crc_error_reset_threshold, int, 0644); -MODULE_PARM_DESC(crc_error_reset_threshold, - "Max number of CRC errors before XAUI reset"); - struct tenxpress_phy_data { enum efx_loopback_mode loopback_mode; - atomic_t bad_crc_count; enum efx_phy_mode phy_mode; int bad_lp_tries; }; -void tenxpress_crc_err(struct efx_nic *efx) -{ - struct tenxpress_phy_data *phy_data = efx->phy_data; - if (phy_data != NULL) - atomic_inc(&phy_data->bad_crc_count); -} - static ssize_t show_phy_short_reach(struct device *dev, struct device_attribute *attr, char *buf) { @@ -284,7 +275,9 @@ static int tenxpress_init(struct efx_nic *efx) PMA_PMD_XCONTROL_REG); reg |= ((1 << PMA_PMD_EXT_GMII_EN_LBN) | (1 << PMA_PMD_EXT_CLK_OUT_LBN) | - (1 << PMA_PMD_EXT_CLK312_LBN)); + (1 << PMA_PMD_EXT_CLK312_LBN) | + (1 << PMA_PMD_EXT_ROBUST_LBN)); + mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, PMA_PMD_XCONTROL_REG, reg); mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT, @@ -346,6 +339,7 @@ static int tenxpress_phy_init(struct efx_nic *efx) rc = tenxpress_init(efx); if (rc < 0) goto fail; + mdio_clause45_set_pause(efx); if (efx->phy_type == PHY_TYPE_SFT9001B) { rc = device_create_file(&efx->pci_dev->dev, @@ -376,8 +370,8 @@ static int tenxpress_special_reset(struct efx_nic *efx) /* The XGMAC clock is driven from the SFC7101/SFT9001 312MHz clock, so * a special software reset can glitch the XGMAC sufficiently for stats - * requests to fail. Since we don't often special_reset, just lock. */ - spin_lock(&efx->stats_lock); + * requests to fail. */ + efx_stats_disable(efx); /* Initiate reset */ reg = mdio_clause45_read(efx, efx->mii.phy_id, @@ -392,17 +386,17 @@ static int tenxpress_special_reset(struct efx_nic *efx) rc = mdio_clause45_wait_reset_mmds(efx, TENXPRESS_REQUIRED_DEVS); if (rc < 0) - goto unlock; + goto out; /* Try and reconfigure the device */ rc = tenxpress_init(efx); if (rc < 0) - goto unlock; + goto out; /* Wait for the XGXS state machine to churn */ mdelay(10); -unlock: - spin_unlock(&efx->stats_lock); +out: + efx_stats_enable(efx); return rc; } @@ -520,7 +514,7 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) { struct tenxpress_phy_data *phy_data = efx->phy_data; struct ethtool_cmd ecmd; - bool phy_mode_change, loop_reset, loop_toggle, loopback; + bool phy_mode_change, loop_reset; if (efx->phy_mode & (PHY_MODE_OFF | PHY_MODE_SPECIAL)) { phy_data->phy_mode = efx->phy_mode; @@ -531,12 +525,10 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) phy_mode_change = (efx->phy_mode == PHY_MODE_NORMAL && phy_data->phy_mode != PHY_MODE_NORMAL); - loopback = LOOPBACK_MASK(efx) & efx->phy_op->loopbacks; - loop_toggle = LOOPBACK_CHANGED(phy_data, efx, efx->phy_op->loopbacks); loop_reset = (LOOPBACK_OUT_OF(phy_data, efx, efx->phy_op->loopbacks) || LOOPBACK_CHANGED(phy_data, efx, 1 << LOOPBACK_GPHY)); - if (loop_reset || loop_toggle || loopback || phy_mode_change) { + if (loop_reset || phy_mode_change) { int rc; efx->phy_op->get_settings(efx, &ecmd); @@ -551,20 +543,6 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) falcon_reset_xaui(efx); } - if (efx->phy_type != PHY_TYPE_SFX7101) { - /* Only change autoneg once, on coming out or - * going into loopback */ - if (loop_toggle) - ecmd.autoneg = !loopback; - if (loopback) { - ecmd.duplex = DUPLEX_FULL; - if (efx->loopback_mode == LOOPBACK_GPHY) - ecmd.speed = SPEED_1000; - else - ecmd.speed = SPEED_10000; - } - } - rc = efx->phy_op->set_settings(efx, &ecmd); WARN_ON(rc); } @@ -623,13 +601,6 @@ static void tenxpress_phy_poll(struct efx_nic *efx) if (phy_data->phy_mode != PHY_MODE_NORMAL) return; - - if (EFX_WORKAROUND_10750(efx) && - atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) { - EFX_ERR(efx, "Resetting XAUI due to too many CRC errors\n"); - falcon_reset_xaui(efx); - atomic_set(&phy_data->bad_crc_count, 0); - } } static void tenxpress_phy_fini(struct efx_nic *efx) @@ -772,107 +743,76 @@ reset: return rc; } -static u32 tenxpress_get_xnp_lpa(struct efx_nic *efx) +static void +tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) { - int phy = efx->mii.phy_id; - u32 lpa = 0; + int phy_id = efx->mii.phy_id; + u32 adv = 0, lpa = 0; int reg; if (efx->phy_type != PHY_TYPE_SFX7101) { - reg = mdio_clause45_read(efx, phy, MDIO_MMD_C22EXT, - C22EXT_MSTSLV_REG); - if (reg & (1 << C22EXT_MSTSLV_1000_HD_LBN)) + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT, + C22EXT_MSTSLV_CTRL); + if (reg & (1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN)) + adv |= ADVERTISED_1000baseT_Full; + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT, + C22EXT_MSTSLV_STATUS); + if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN)) lpa |= ADVERTISED_1000baseT_Half; - if (reg & (1 << C22EXT_MSTSLV_1000_FD_LBN)) + if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN)) lpa |= ADVERTISED_1000baseT_Full; } - reg = mdio_clause45_read(efx, phy, MDIO_MMD_AN, MDIO_AN_10GBT_STATUS); + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL); + if (reg & (1 << MDIO_AN_10GBT_CTRL_ADV_10G_LBN)) + adv |= ADVERTISED_10000baseT_Full; + reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_STATUS); if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN)) lpa |= ADVERTISED_10000baseT_Full; - return lpa; -} -static void sfx7101_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) -{ - mdio_clause45_get_settings_ext(efx, ecmd, ADVERTISED_10000baseT_Full, - tenxpress_get_xnp_lpa(efx)); - ecmd->supported |= SUPPORTED_10000baseT_Full; - ecmd->advertising |= ADVERTISED_10000baseT_Full; + mdio_clause45_get_settings_ext(efx, ecmd, adv, lpa); + + if (efx->phy_type != PHY_TYPE_SFX7101) + ecmd->supported |= (SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full); + + /* In loopback, the PHY automatically brings up the correct interface, + * but doesn't advertise the correct speed. So override it */ + if (efx->loopback_mode == LOOPBACK_GPHY) + ecmd->speed = SPEED_1000; + else if (LOOPBACK_MASK(efx) & efx->phy_op->loopbacks) + ecmd->speed = SPEED_10000; } -static void sft9001_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) +static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) { - int phy_id = efx->mii.phy_id; - u32 xnp_adv = 0; - int reg; - - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, - PMA_PMD_SPEED_ENABLE_REG); - if (EFX_WORKAROUND_13204(efx) && (reg & (1 << PMA_PMD_100TX_ADV_LBN))) - xnp_adv |= ADVERTISED_100baseT_Full; - if (reg & (1 << PMA_PMD_1000T_ADV_LBN)) - xnp_adv |= ADVERTISED_1000baseT_Full; - if (reg & (1 << PMA_PMD_10000T_ADV_LBN)) - xnp_adv |= ADVERTISED_10000baseT_Full; - - mdio_clause45_get_settings_ext(efx, ecmd, xnp_adv, - tenxpress_get_xnp_lpa(efx)); - - ecmd->supported |= (SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_1000baseT_Full); + if (!ecmd->autoneg) + return -EINVAL; - /* Use the vendor defined C22ext register for duplex settings */ - if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) { - reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT, - GPHY_XCONTROL_REG); - ecmd->duplex = (reg & (1 << GPHY_DUPLEX_LBN) ? - DUPLEX_FULL : DUPLEX_HALF); - } + return mdio_clause45_set_settings(efx, ecmd); } -static int sft9001_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd) +static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising) { - int phy_id = efx->mii.phy_id; - int rc; - - rc = mdio_clause45_set_settings(efx, ecmd); - if (rc) - return rc; - - if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) - mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT, - GPHY_XCONTROL_REG, GPHY_DUPLEX_LBN, - ecmd->duplex == DUPLEX_FULL); - - return rc; + mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV_10G_LBN, + advertising & ADVERTISED_10000baseT_Full); } -static bool sft9001_set_xnp_advertise(struct efx_nic *efx, u32 advertising) +static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising) { - int phy = efx->mii.phy_id; - int reg = mdio_clause45_read(efx, phy, MDIO_MMD_PMAPMD, - PMA_PMD_SPEED_ENABLE_REG); - bool enabled; - - reg &= ~((1 << 2) | (1 << 3)); - if (EFX_WORKAROUND_13204(efx) && - (advertising & ADVERTISED_100baseT_Full)) - reg |= 1 << PMA_PMD_100TX_ADV_LBN; - if (advertising & ADVERTISED_1000baseT_Full) - reg |= 1 << PMA_PMD_1000T_ADV_LBN; - if (advertising & ADVERTISED_10000baseT_Full) - reg |= 1 << PMA_PMD_10000T_ADV_LBN; - mdio_clause45_write(efx, phy, MDIO_MMD_PMAPMD, - PMA_PMD_SPEED_ENABLE_REG, reg); - - enabled = (advertising & - (ADVERTISED_1000baseT_Half | - ADVERTISED_1000baseT_Full | - ADVERTISED_10000baseT_Full)); - if (EFX_WORKAROUND_13204(efx)) - enabled |= (advertising & ADVERTISED_100baseT_Full); - return enabled; + int phy_id = efx->mii.phy_id; + + mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT, + C22EXT_MSTSLV_CTRL, + C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN, + advertising & ADVERTISED_1000baseT_Full); + mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN, + MDIO_AN_10GBT_CTRL, + MDIO_AN_10GBT_CTRL_ADV_10G_LBN, + advertising & ADVERTISED_10000baseT_Full); } struct efx_phy_operations falcon_sfx7101_phy_ops = { @@ -882,8 +822,9 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = { .poll = tenxpress_phy_poll, .fini = tenxpress_phy_fini, .clear_interrupt = efx_port_dummy_op_void, - .get_settings = sfx7101_get_settings, - .set_settings = mdio_clause45_set_settings, + .get_settings = tenxpress_get_settings, + .set_settings = tenxpress_set_settings, + .set_npage_adv = sfx7101_set_npage_adv, .num_tests = ARRAY_SIZE(sfx7101_test_names), .test_names = sfx7101_test_names, .run_tests = sfx7101_run_tests, @@ -898,9 +839,9 @@ struct efx_phy_operations falcon_sft9001_phy_ops = { .poll = tenxpress_phy_poll, .fini = tenxpress_phy_fini, .clear_interrupt = efx_port_dummy_op_void, - .get_settings = sft9001_get_settings, - .set_settings = sft9001_set_settings, - .set_xnp_advertise = sft9001_set_xnp_advertise, + .get_settings = tenxpress_get_settings, + .set_settings = tenxpress_set_settings, + .set_npage_adv = sft9001_set_npage_adv, .num_tests = ARRAY_SIZE(sft9001_test_names), .test_names = sft9001_test_names, .run_tests = sft9001_run_tests, diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h index 82e03e1d737..78de68f4a95 100644 --- a/drivers/net/sfc/workarounds.h +++ b/drivers/net/sfc/workarounds.h @@ -18,8 +18,8 @@ #define EFX_WORKAROUND_ALWAYS(efx) 1 #define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1) #define EFX_WORKAROUND_10G(efx) EFX_IS10G(efx) -#define EFX_WORKAROUND_SFX7101(efx) ((efx)->phy_type == PHY_TYPE_SFX7101) -#define EFX_WORKAROUND_SFT9001A(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A) +#define EFX_WORKAROUND_SFT9001(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A || \ + (efx)->phy_type == PHY_TYPE_SFT9001B) /* XAUI resets if link not detected */ #define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS @@ -29,8 +29,6 @@ #define EFX_WORKAROUND_7884 EFX_WORKAROUND_10G /* TX pkt parser problem with <= 16 byte TXes */ #define EFX_WORKAROUND_9141 EFX_WORKAROUND_ALWAYS -/* Low rate CRC errors require XAUI reset */ -#define EFX_WORKAROUND_10750 EFX_WORKAROUND_SFX7101 /* TX_EV_PKT_ERR can be caused by a dangling TX descriptor * or a PCIe error (bug 11028) */ #define EFX_WORKAROUND_10727 EFX_WORKAROUND_ALWAYS @@ -55,8 +53,8 @@ #define EFX_WORKAROUND_8071 EFX_WORKAROUND_FALCON_A /* Need to send XNP pages for 100BaseT */ -#define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001A -/* Need to keep AN enabled */ -#define EFX_WORKAROUND_13963 EFX_WORKAROUND_SFT9001A +#define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001 +/* Don't restart AN in near-side loopback */ +#define EFX_WORKAROUND_15195 EFX_WORKAROUND_SFT9001 #endif /* EFX_WORKAROUNDS_H */ diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c index 607efeaf0bc..9a00e5566af 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/skfp/skfddi.c @@ -1003,9 +1003,9 @@ static int skfp_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) break; case SKFP_CLR_STATS: /* Zero out the driver statistics */ if (!capable(CAP_NET_ADMIN)) { - memset(&lp->MacStat, 0, sizeof(lp->MacStat)); - } else { status = -EPERM; + } else { + memset(&lp->MacStat, 0, sizeof(lp->MacStat)); } break; default: diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 3668e81e474..994703cc0db 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1403,9 +1403,6 @@ static int sky2_up(struct net_device *dev) } - if (netif_msg_ifup(sky2)) - printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); - netif_carrier_off(dev); /* must be power of 2 */ @@ -1484,6 +1481,9 @@ static int sky2_up(struct net_device *dev) sky2_write32(hw, B0_IMSK, imask); sky2_set_multicast(dev); + + if (netif_msg_ifup(sky2)) + printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); return 0; err_out: diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index f513bdf1c88..783c1a7b869 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -953,7 +953,7 @@ smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes) do { udelay(1); val = smsc911x_reg_read(pdata, RX_DP_CTRL); - } while (timeout-- && (val & RX_DP_CTRL_RX_FFWD_)); + } while (--timeout && (val & RX_DP_CTRL_RX_FFWD_)); if (unlikely(timeout == 0)) SMSC_WARNING(HW, "Timed out waiting for " diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index c14a4c6452c..d801900a503 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -1378,6 +1378,7 @@ static int smsc9420_open(struct net_device *dev) /* test the IRQ connection to the ISR */ smsc_dbg(IFUP, "Testing ISR using IRQ %d", dev->irq); + pd->software_irq_signal = false; spin_lock_irqsave(&pd->int_lock, flags); /* configure interrupt deassertion timer and enable interrupts */ @@ -1393,8 +1394,6 @@ static int smsc9420_open(struct net_device *dev) smsc9420_pci_flush_write(pd); timeout = 1000; - pd->software_irq_signal = false; - smp_wmb(); while (timeout--) { if (pd->software_irq_signal) break; diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 5e2dbaee125..8b3f8468538 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7535,11 +7535,58 @@ static int tg3_test_msi(struct tg3 *tp) return err; } +static int tg3_request_firmware(struct tg3 *tp) +{ + const __be32 *fw_data; + + if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) { + printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n", + tp->dev->name, tp->fw_needed); + return -ENOENT; + } + + fw_data = (void *)tp->fw->data; + + /* Firmware blob starts with version numbers, followed by + * start address and _full_ length including BSS sections + * (which must be longer than the actual data, of course + */ + + tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */ + if (tp->fw_len < (tp->fw->size - 12)) { + printk(KERN_ERR "%s: bogus length %d in \"%s\"\n", + tp->dev->name, tp->fw_len, tp->fw_needed); + release_firmware(tp->fw); + tp->fw = NULL; + return -EINVAL; + } + + /* We no longer need firmware; we have it. */ + tp->fw_needed = NULL; + return 0; +} + static int tg3_open(struct net_device *dev) { struct tg3 *tp = netdev_priv(dev); int err; + if (tp->fw_needed) { + err = tg3_request_firmware(tp); + if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) { + if (err) + return err; + } else if (err) { + printk(KERN_WARNING "%s: TSO capability disabled.\n", + tp->dev->name); + tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE; + } else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) { + printk(KERN_NOTICE "%s: TSO capability restored.\n", + tp->dev->name); + tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE; + } + } + netif_carrier_off(tp->dev); err = tg3_set_power_state(tp, PCI_D0); @@ -12934,7 +12981,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, struct net_device *dev; struct tg3 *tp; int err, pm_cap; - const char *fw_name = NULL; char str[40]; u64 dma_mask, persist_dma_mask; @@ -13091,7 +13137,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, tg3_init_bufmgr_config(tp); if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) - fw_name = FIRMWARE_TG3; + tp->fw_needed = FIRMWARE_TG3; if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) { tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE; @@ -13104,37 +13150,10 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE; } else { tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE | TG3_FLG2_TSO_BUG; - } - if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) { if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) - fw_name = FIRMWARE_TG3TSO5; + tp->fw_needed = FIRMWARE_TG3TSO5; else - fw_name = FIRMWARE_TG3TSO; - } - - if (fw_name) { - const __be32 *fw_data; - - err = request_firmware(&tp->fw, fw_name, &tp->pdev->dev); - if (err) { - printk(KERN_ERR "tg3: Failed to load firmware \"%s\"\n", - fw_name); - goto err_out_iounmap; - } - - fw_data = (void *)tp->fw->data; - - /* Firmware blob starts with version numbers, followed by - start address and _full_ length including BSS sections - (which must be longer than the actual data, of course */ - - tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */ - if (tp->fw_len < (tp->fw->size - 12)) { - printk(KERN_ERR "tg3: bogus length %d in \"%s\"\n", - tp->fw_len, fw_name); - err = -EINVAL; - goto err_out_fw; - } + tp->fw_needed = FIRMWARE_TG3TSO; } /* TSO is on by default on chips that support hardware TSO. diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index ae5da603c6a..508def3e077 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2764,6 +2764,7 @@ struct tg3 { struct ethtool_coalesce coal; /* firmware info */ + const char *fw_needed; const struct firmware *fw; u32 fw_len; /* includes BSS */ }; diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c index 1210fb3748a..db7d5e11855 100644 --- a/drivers/net/tulip/21142.c +++ b/drivers/net/tulip/21142.c @@ -9,6 +9,11 @@ Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html} for more information on this driver. + + DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller + Hardware Reference Manual" is currently available at : + http://developer.intel.com/design/network/manuals/278074.htm + Please submit bugs to http://bugzilla.kernel.org/ . */ @@ -32,7 +37,11 @@ void t21142_media_task(struct work_struct *work) int csr12 = ioread32(ioaddr + CSR12); int next_tick = 60*HZ; int new_csr6 = 0; + int csr14 = ioread32(ioaddr + CSR14); + /* CSR12[LS10,LS100] are not reliable during autonegotiation */ + if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000) + csr12 |= 6; if (tulip_debug > 2) printk(KERN_INFO"%s: 21143 negotiation status %8.8x, %s.\n", dev->name, csr12, medianame[dev->if_port]); @@ -76,7 +85,7 @@ void t21142_media_task(struct work_struct *work) new_csr6 = 0x83860000; dev->if_port = 3; iowrite32(0, ioaddr + CSR13); - iowrite32(0x0003FF7F, ioaddr + CSR14); + iowrite32(0x0003FFFF, ioaddr + CSR14); iowrite16(8, ioaddr + CSR15); iowrite32(1, ioaddr + CSR13); } @@ -132,10 +141,14 @@ void t21142_lnk_change(struct net_device *dev, int csr5) struct tulip_private *tp = netdev_priv(dev); void __iomem *ioaddr = tp->base_addr; int csr12 = ioread32(ioaddr + CSR12); + int csr14 = ioread32(ioaddr + CSR14); + /* CSR12[LS10,LS100] are not reliable during autonegotiation */ + if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000) + csr12 |= 6; if (tulip_debug > 1) printk(KERN_INFO"%s: 21143 link status interrupt %8.8x, CSR5 %x, " - "%8.8x.\n", dev->name, csr12, csr5, ioread32(ioaddr + CSR14)); + "%8.8x.\n", dev->name, csr12, csr5, csr14); /* If NWay finished and we have a negotiated partner capability. */ if (tp->nway && !tp->nwayset && (csr12 & 0x7000) == 0x5000) { @@ -143,7 +156,9 @@ void t21142_lnk_change(struct net_device *dev, int csr5) int negotiated = tp->sym_advertise & (csr12 >> 16); tp->lpar = csr12 >> 16; tp->nwayset = 1; - if (negotiated & 0x0100) dev->if_port = 5; + /* If partner cannot negotiate, it is 10Mbps Half Duplex */ + if (!(csr12 & 0x8000)) dev->if_port = 0; + else if (negotiated & 0x0100) dev->if_port = 5; else if (negotiated & 0x0080) dev->if_port = 3; else if (negotiated & 0x0040) dev->if_port = 4; else if (negotiated & 0x0020) dev->if_port = 0; @@ -214,7 +229,7 @@ void t21142_lnk_change(struct net_device *dev, int csr5) tp->timer.expires = RUN_AT(3*HZ); add_timer(&tp->timer); } else if (dev->if_port == 5) - iowrite32(ioread32(ioaddr + CSR14) & ~0x080, ioaddr + CSR14); + iowrite32(csr14 & ~0x080, ioaddr + CSR14); } else if (dev->if_port == 0 || dev->if_port == 4) { if ((csr12 & 4) == 0) printk(KERN_INFO"%s: 21143 10baseT link beat good.\n", diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index 11441225bf4..e87986867ba 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1536,6 +1536,11 @@ static void adjust_link(struct net_device *dev) static int init_phy(struct net_device *dev) { struct ucc_geth_private *priv = netdev_priv(dev); + struct device_node *np = priv->node; + struct device_node *phy, *mdio; + const phandle *ph; + char bus_name[MII_BUS_ID_SIZE]; + const unsigned int *id; struct phy_device *phydev; char phy_id[BUS_ID_SIZE]; @@ -1543,8 +1548,18 @@ static int init_phy(struct net_device *dev) priv->oldspeed = 0; priv->oldduplex = -1; - snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->ug_info->mdio_bus, - priv->ug_info->phy_address); + ph = of_get_property(np, "phy-handle", NULL); + phy = of_find_node_by_phandle(*ph); + mdio = of_get_parent(phy); + + id = of_get_property(phy, "reg", NULL); + + of_node_put(phy); + of_node_put(mdio); + + uec_mdio_bus_name(bus_name, mdio); + snprintf(phy_id, sizeof(phy_id), "%s:%02x", + bus_name, *id); phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface); @@ -3748,6 +3763,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma ugeth->ug_info = ug_info; ugeth->dev = dev; + ugeth->node = np; return 0; } diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h index 8f699cb773e..16cbe42ba43 100644 --- a/drivers/net/ucc_geth.h +++ b/drivers/net/ucc_geth.h @@ -1186,6 +1186,8 @@ struct ucc_geth_private { int oldspeed; int oldduplex; int oldlink; + + struct device_node *node; }; void uec_set_ethtool_ops(struct net_device *netdev); diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c index c001d261366..54635911305 100644 --- a/drivers/net/ucc_geth_mii.c +++ b/drivers/net/ucc_geth_mii.c @@ -156,7 +156,7 @@ static int uec_mdio_probe(struct of_device *ofdev, const struct of_device_id *ma if (err) goto reg_map_fail; - snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", res.start); + uec_mdio_bus_name(new_bus->id, np); new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL); @@ -283,3 +283,13 @@ void uec_mdio_exit(void) { of_unregister_platform_driver(&uec_mdio_driver); } + +void uec_mdio_bus_name(char *name, struct device_node *np) +{ + const u32 *reg; + + reg = of_get_property(np, "reg", NULL); + + snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0); +} + diff --git a/drivers/net/ucc_geth_mii.h b/drivers/net/ucc_geth_mii.h index 1e45b2028a5..840cf80235b 100644 --- a/drivers/net/ucc_geth_mii.h +++ b/drivers/net/ucc_geth_mii.h @@ -97,4 +97,5 @@ int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum); int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value); int __init uec_mdio_init(void); void uec_mdio_exit(void); +void uec_mdio_bus_name(char *name, struct device_node *np); #endif /* __UEC_MII_H */ diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c index 5385d66b306..ced8f36ebd0 100644 --- a/drivers/net/usb/mcs7830.c +++ b/drivers/net/usb/mcs7830.c @@ -94,10 +94,18 @@ static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data) { struct usb_device *xdev = dev->udev; int ret; + void *buffer; + + buffer = kmalloc(size, GFP_NOIO); + if (buffer == NULL) + return -ENOMEM; ret = usb_control_msg(xdev, usb_rcvctrlpipe(xdev, 0), MCS7830_RD_BREQ, - MCS7830_RD_BMREQ, 0x0000, index, data, + MCS7830_RD_BMREQ, 0x0000, index, buffer, size, MCS7830_CTRL_TIMEOUT); + memcpy(data, buffer, size); + kfree(buffer); + return ret; } @@ -105,10 +113,18 @@ static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, void *data) { struct usb_device *xdev = dev->udev; int ret; + void *buffer; + + buffer = kmalloc(size, GFP_NOIO); + if (buffer == NULL) + return -ENOMEM; + + memcpy(buffer, data, size); ret = usb_control_msg(xdev, usb_sndctrlpipe(xdev, 0), MCS7830_WR_BREQ, - MCS7830_WR_BMREQ, 0x0000, index, data, + MCS7830_WR_BMREQ, 0x0000, index, buffer, size, MCS7830_CTRL_TIMEOUT); + kfree(buffer); return ret; } diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index a75f91dc315..c5691fdb707 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -1302,7 +1302,7 @@ static void velocity_free_rd_ring(struct velocity_info *vptr) static int velocity_init_td_ring(struct velocity_info *vptr) { dma_addr_t curr; - unsigned int j; + int j; /* Init the TD ring entries */ for (j = 0; j < vptr->tx.numq; j++) { diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 43f6523c40b..c68808336c8 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -24,6 +24,7 @@ #include <linux/virtio.h> #include <linux/virtio_net.h> #include <linux/scatterlist.h> +#include <linux/if_vlan.h> static int napi_weight = 128; module_param(napi_weight, int, 0444); @@ -33,7 +34,7 @@ module_param(csum, bool, 0444); module_param(gso, bool, 0444); /* FIXME: MTU in config. */ -#define MAX_PACKET_LEN (ETH_HLEN+ETH_DATA_LEN) +#define MAX_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN) #define GOOD_COPY_LEN 128 struct virtnet_info @@ -286,7 +287,7 @@ static void try_fill_recv_maxbufs(struct virtnet_info *vi) skb_put(skb, MAX_PACKET_LEN); hdr = skb_vnet_hdr(skb); - sg_init_one(sg, hdr, sizeof(*hdr)); + sg_set_buf(sg, hdr, sizeof(*hdr)); if (vi->big_packets) { for (i = 0; i < MAX_SKB_FRAGS; i++) { @@ -487,9 +488,9 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) /* Encode metadata header at front. */ if (vi->mergeable_rx_bufs) - sg_init_one(sg, mhdr, sizeof(*mhdr)); + sg_set_buf(sg, mhdr, sizeof(*mhdr)); else - sg_init_one(sg, hdr, sizeof(*hdr)); + sg_set_buf(sg, hdr, sizeof(*hdr)); num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1; diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c index d3d37fed689..15d9f51b292 100644 --- a/drivers/net/wimax/i2400m/control.c +++ b/drivers/net/wimax/i2400m/control.c @@ -609,7 +609,7 @@ void i2400m_msg_to_dev_cancel_wait(struct i2400m *i2400m, int code) spin_lock_irqsave(&i2400m->rx_lock, flags); ack_skb = i2400m->ack_skb; if (ack_skb && !IS_ERR(ack_skb)) - kfree(ack_skb); + kfree_skb(ack_skb); i2400m->ack_skb = ERR_PTR(code); spin_unlock_irqrestore(&i2400m->rx_lock, flags); } diff --git a/drivers/net/wimax/i2400m/debugfs.c b/drivers/net/wimax/i2400m/debugfs.c index 62663298597..9b81af3f80a 100644 --- a/drivers/net/wimax/i2400m/debugfs.c +++ b/drivers/net/wimax/i2400m/debugfs.c @@ -234,20 +234,6 @@ struct dentry *debugfs_create_i2400m_reset( &fops_i2400m_reset); } -/* - * Debug levels control; see debug.h - */ -struct d_level D_LEVEL[] = { - D_SUBMODULE_DEFINE(control), - D_SUBMODULE_DEFINE(driver), - D_SUBMODULE_DEFINE(debugfs), - D_SUBMODULE_DEFINE(fw), - D_SUBMODULE_DEFINE(netdev), - D_SUBMODULE_DEFINE(rfkill), - D_SUBMODULE_DEFINE(rx), - D_SUBMODULE_DEFINE(tx), -}; -size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); #define __debugfs_register(prefix, name, parent) \ do { \ diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c index 5f98047e18c..e80a0b65a75 100644 --- a/drivers/net/wimax/i2400m/driver.c +++ b/drivers/net/wimax/i2400m/driver.c @@ -707,6 +707,22 @@ void i2400m_release(struct i2400m *i2400m) EXPORT_SYMBOL_GPL(i2400m_release); +/* + * Debug levels control; see debug.h + */ +struct d_level D_LEVEL[] = { + D_SUBMODULE_DEFINE(control), + D_SUBMODULE_DEFINE(driver), + D_SUBMODULE_DEFINE(debugfs), + D_SUBMODULE_DEFINE(fw), + D_SUBMODULE_DEFINE(netdev), + D_SUBMODULE_DEFINE(rfkill), + D_SUBMODULE_DEFINE(rx), + D_SUBMODULE_DEFINE(tx), +}; +size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL); + + static int __init i2400m_driver_init(void) { diff --git a/drivers/net/wimax/i2400m/usb-rx.c b/drivers/net/wimax/i2400m/usb-rx.c index 074cc1f8985..a314799967c 100644 --- a/drivers/net/wimax/i2400m/usb-rx.c +++ b/drivers/net/wimax/i2400m/usb-rx.c @@ -184,6 +184,8 @@ void i2400mu_rx_size_maybe_shrink(struct i2400mu *i2400mu) * NOTE: this function might realloc the skb (if it is too small), * so always update with the one returned. * ERR_PTR() is < 0 on error. + * Will return NULL if it cannot reallocate -- this can be + * considered a transient retryable error. */ static struct sk_buff *i2400mu_rx(struct i2400mu *i2400mu, struct sk_buff *rx_skb) @@ -243,8 +245,8 @@ retry: if (printk_ratelimit()) dev_err(dev, "RX: Can't reallocate skb to %d; " "RX dropped\n", rx_size); - kfree(rx_skb); - result = 0; + kfree_skb(rx_skb); + rx_skb = NULL; goto out; /* drop it...*/ } kfree_skb(rx_skb); @@ -344,7 +346,8 @@ int i2400mu_rxd(void *_i2400mu) if (IS_ERR(rx_skb)) goto out; atomic_dec(&i2400mu->rx_pending_count); - if (rx_skb->len == 0) { /* some ignorable condition */ + if (rx_skb == NULL || rx_skb->len == 0) { + /* some "ignorable" condition */ kfree_skb(rx_skb); continue; } diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c index 8ef87356e08..a533ed60bb4 100644 --- a/drivers/net/wireless/ath5k/base.c +++ b/drivers/net/wireless/ath5k/base.c @@ -1028,6 +1028,8 @@ ath5k_setup_bands(struct ieee80211_hw *hw) * it's done by reseting the chip. To accomplish this we must * first cleanup any pending DMA, then restart stuff after a la * ath5k_init. + * + * Called with sc->lock. */ static int ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan) @@ -2814,11 +2816,17 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed) { struct ath5k_softc *sc = hw->priv; struct ieee80211_conf *conf = &hw->conf; + int ret; + + mutex_lock(&sc->lock); sc->bintval = conf->beacon_int; sc->power_level = conf->power_level; - return ath5k_chan_set(sc, conf->channel); + ret = ath5k_chan_set(sc, conf->channel); + + mutex_unlock(&sc->lock); + return ret; } static int diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 04ab457a8fa..1b71b934bb5 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -490,7 +490,7 @@ static inline int ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table, static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw) { - if (WLAN_RC_PHY_HT(phy) & !(capflag & WLAN_RC_HT_FLAG)) + if (WLAN_RC_PHY_HT(phy) && !(capflag & WLAN_RC_HT_FLAG)) return 0; if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG)) return 0; diff --git a/drivers/net/wireless/ath9k/regd_common.h b/drivers/net/wireless/ath9k/regd_common.h index 9112c030b1e..6df1b3b77c2 100644 --- a/drivers/net/wireless/ath9k/regd_common.h +++ b/drivers/net/wireless/ath9k/regd_common.h @@ -228,7 +228,7 @@ enum { }; #define REG_DOMAIN_2GHZ_MASK (REQ_MASK & \ - (!(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB))) + (~(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB))) #define REG_DOMAIN_5GHZ_MASK REQ_MASK static struct reg_dmn_pair_mapping regDomainPairs[] = { diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index 9b60a0c5de5..21c841847d8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -638,12 +638,16 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, s8 scale_action = 0; unsigned long flags; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - u16 fc, rate_mask; + u16 fc; + u16 rate_mask = 0; struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_r; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); IWL_DEBUG_RATE("enter\n"); + if (sta) + rate_mask = sta->supp_rates[sband->band]; + /* Send management frames and broadcast/multicast data using lowest * rate. */ fc = le16_to_cpu(hdr->frame_control); @@ -651,11 +655,15 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, is_multicast_ether_addr(hdr->addr1) || !sta || !priv_sta) { IWL_DEBUG_RATE("leave: No STA priv data to update!\n"); - info->control.rates[0].idx = rate_lowest_index(sband, sta); + if (!rate_mask) + info->control.rates[0].idx = + rate_lowest_index(sband, NULL); + else + info->control.rates[0].idx = + rate_lowest_index(sband, sta); return; } - rate_mask = sta->supp_rates[sband->band]; index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT - 1); if (sband->band == IEEE80211_BAND_5GHZ) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index f3f17929ca0..27f50471aed 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -944,7 +944,8 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, } /* See if there's a better rate or modulation mode to try. */ - rs_rate_scale_perform(priv, hdr, sta, lq_sta); + if (sta && sta->supp_rates[sband->band]) + rs_rate_scale_perform(priv, hdr, sta, lq_sta); out: return; } @@ -2101,14 +2102,23 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct iwl_lq_sta *lq_sta = priv_sta; int rate_idx; + u64 mask_bit = 0; IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n"); + if (sta) + mask_bit = sta->supp_rates[sband->band]; + /* Send management frames and broadcast/multicast data using lowest * rate. */ if (!ieee80211_is_data(hdr->frame_control) || is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) { - info->control.rates[0].idx = rate_lowest_index(sband, sta); + if (!mask_bit) + info->control.rates[0].idx = + rate_lowest_index(sband, NULL); + else + info->control.rates[0].idx = + rate_lowest_index(sband, sta); return; } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 5da6b35cd26..b35c8813bef 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -1719,6 +1719,10 @@ static int iwl_read_ucode(struct iwl_priv *priv) priv->ucode_data_backup.len = data_size; iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup); + if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr || + !priv->ucode_data_backup.v_addr) + goto err_pci_alloc; + /* Initialization instructions and data */ if (init_size && init_data_size) { priv->ucode_init.len = init_size; @@ -2482,7 +2486,7 @@ static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) dev_kfree_skb_any(skb); IWL_DEBUG_MACDUMP("leave\n"); - return 0; + return NETDEV_TX_OK; } static int iwl_mac_add_interface(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index 8c71ad4f88c..4b35b30e493 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -224,7 +224,7 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd) IWL_ERROR("Error: Response NULL in '%s'\n", get_cmd_string(cmd->id)); ret = -EIO; - goto out; + goto cancel; } ret = 0; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index d64580805d6..95d01984c80 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -745,7 +745,7 @@ static int iwl3945_send_cmd_sync(struct iwl3945_priv *priv, struct iwl3945_host_ IWL_ERROR("Error: Response NULL in '%s'\n", get_cmd_string(cmd->id)); ret = -EIO; - goto out; + goto cancel; } ret = 0; @@ -6538,7 +6538,7 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) dev_kfree_skb_any(skb); IWL_DEBUG_MAC80211("leave\n"); - return 0; + return NETDEV_TX_OK; } static int iwl3945_mac_add_interface(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h index e173b1b46c2..f6a79a653b7 100644 --- a/drivers/net/wireless/libertas/hostcmd.h +++ b/drivers/net/wireless/libertas/hostcmd.h @@ -32,7 +32,7 @@ struct txpd { u8 pktdelay_2ms; /* reserved */ u8 reserved1; -}; +} __attribute__ ((packed)); /* RxPD Descriptor */ struct rxpd { @@ -63,7 +63,7 @@ struct rxpd { /* Pkt Priority */ u8 priority; u8 reserved[3]; -}; +} __attribute__ ((packed)); struct cmd_header { __le16 command; @@ -97,7 +97,7 @@ struct enc_key { struct lbs_offset_value { u32 offset; u32 value; -}; +} __attribute__ ((packed)); /* Define general data structure */ /* cmd_DS_GEN */ @@ -107,7 +107,7 @@ struct cmd_ds_gen { __le16 seqnum; __le16 result; void *cmdresp[0]; -}; +} __attribute__ ((packed)); #define S_DS_GEN sizeof(struct cmd_ds_gen) @@ -163,7 +163,7 @@ struct cmd_ds_802_11_subscribe_event { * bump this up a bit. */ uint8_t tlv[128]; -}; +} __attribute__ ((packed)); /* * This scan handle Country Information IE(802.11d compliant) @@ -180,7 +180,7 @@ struct cmd_ds_802_11_scan { mrvlietypes_chanlistparamset_t ChanListParamSet; mrvlietypes_ratesparamset_t OpRateSet; #endif -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_scan_rsp { struct cmd_header hdr; @@ -188,7 +188,7 @@ struct cmd_ds_802_11_scan_rsp { __le16 bssdescriptsize; uint8_t nr_sets; uint8_t bssdesc_and_tlvbuffer[0]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_get_log { struct cmd_header hdr; @@ -206,33 +206,33 @@ struct cmd_ds_802_11_get_log { __le32 fcserror; __le32 txframe; __le32 wepundecryptable; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_control { struct cmd_header hdr; __le16 action; u16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_multicast_adr { struct cmd_header hdr; __le16 action; __le16 nr_of_adrs; u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_authenticate { u8 macaddr[ETH_ALEN]; u8 authtype; u8 reserved[10]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_deauthenticate { struct cmd_header hdr; u8 macaddr[ETH_ALEN]; __le16 reasoncode; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_associate { u8 peerstaaddr[6]; @@ -251,7 +251,7 @@ struct cmd_ds_802_11_associate { struct cmd_ds_802_11_associate_rsp { struct ieeetypes_assocrsp assocRsp; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_set_wep { struct cmd_header hdr; @@ -265,7 +265,7 @@ struct cmd_ds_802_11_set_wep { /* 40, 128bit or TXWEP */ uint8_t keytype[4]; uint8_t keymaterial[4][16]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_3_get_stat { __le32 xmitok; @@ -274,7 +274,7 @@ struct cmd_ds_802_3_get_stat { __le32 rcverror; __le32 rcvnobuffer; __le32 rcvcrcerror; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_get_stat { __le32 txfragmentcnt; @@ -294,7 +294,7 @@ struct cmd_ds_802_11_get_stat { __le32 txbeacon; __le32 rxbeacon; __le32 wepundecryptable; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_snmp_mib { struct cmd_header hdr; @@ -303,58 +303,58 @@ struct cmd_ds_802_11_snmp_mib { __le16 oid; __le16 bufsize; u8 value[128]; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_reg_map { __le16 buffersize; u8 regmap[128]; __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_bbp_reg_map { __le16 buffersize; u8 regmap[128]; __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_rf_reg_map { __le16 buffersize; u8 regmap[64]; __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_reg_access { __le16 action; __le16 offset; __le32 value; -}; +} __attribute__ ((packed)); struct cmd_ds_bbp_reg_access { __le16 action; __le16 offset; u8 value; u8 reserved[3]; -}; +} __attribute__ ((packed)); struct cmd_ds_rf_reg_access { __le16 action; __le16 offset; u8 value; u8 reserved[3]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_radio_control { struct cmd_header hdr; __le16 action; __le16 control; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_beacon_control { __le16 action; __le16 beacon_enable; __le16 beacon_period; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_sleep_params { struct cmd_header hdr; @@ -379,7 +379,7 @@ struct cmd_ds_802_11_sleep_params { /* reserved field, should be set to zero */ __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_inactivity_timeout { struct cmd_header hdr; @@ -389,7 +389,7 @@ struct cmd_ds_802_11_inactivity_timeout { /* Inactivity timeout in msec */ __le16 timeout; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rf_channel { struct cmd_header hdr; @@ -399,7 +399,7 @@ struct cmd_ds_802_11_rf_channel { __le16 rftype; /* unused */ __le16 reserved; /* unused */ u8 channellist[32]; /* unused */ -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rssi { /* weighting factor */ @@ -408,21 +408,21 @@ struct cmd_ds_802_11_rssi { __le16 reserved_0; __le16 reserved_1; __le16 reserved_2; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rssi_rsp { __le16 SNR; __le16 noisefloor; __le16 avgSNR; __le16 avgnoisefloor; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_mac_address { struct cmd_header hdr; __le16 action; u8 macadd[ETH_ALEN]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rf_tx_power { struct cmd_header hdr; @@ -431,7 +431,7 @@ struct cmd_ds_802_11_rf_tx_power { __le16 curlevel; s8 maxlevel; s8 minlevel; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rf_antenna { __le16 action; @@ -439,33 +439,33 @@ struct cmd_ds_802_11_rf_antenna { /* Number of antennas or 0xffff(diversity) */ __le16 antennamode; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_monitor_mode { __le16 action; __le16 mode; -}; +} __attribute__ ((packed)); struct cmd_ds_set_boot2_ver { struct cmd_header hdr; __le16 action; __le16 version; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_fw_wake_method { struct cmd_header hdr; __le16 action; __le16 method; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_sleep_period { struct cmd_header hdr; __le16 action; __le16 period; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_ps_mode { __le16 action; @@ -473,7 +473,7 @@ struct cmd_ds_802_11_ps_mode { __le16 multipledtim; __le16 reserved; __le16 locallisteninterval; -}; +} __attribute__ ((packed)); struct cmd_confirm_sleep { struct cmd_header hdr; @@ -483,7 +483,7 @@ struct cmd_confirm_sleep { __le16 multipledtim; __le16 reserved; __le16 locallisteninterval; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_data_rate { struct cmd_header hdr; @@ -491,14 +491,14 @@ struct cmd_ds_802_11_data_rate { __le16 action; __le16 reserved; u8 rates[MAX_RATES]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rate_adapt_rateset { struct cmd_header hdr; __le16 action; __le16 enablehwauto; __le16 bitmap; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_ad_hoc_start { struct cmd_header hdr; @@ -520,7 +520,7 @@ struct cmd_ds_802_11_ad_hoc_result { u8 pad[3]; u8 bssid[ETH_ALEN]; -}; +} __attribute__ ((packed)); struct adhoc_bssdesc { u8 bssid[ETH_ALEN]; @@ -578,7 +578,7 @@ struct MrvlIEtype_keyParamSet { /* key material of size keylen */ u8 key[32]; -}; +} __attribute__ ((packed)); #define MAX_WOL_RULES 16 @@ -590,7 +590,7 @@ struct host_wol_rule { __le16 reserve; __be32 sig_mask; __be32 signature; -}; +} __attribute__ ((packed)); struct wol_config { uint8_t action; @@ -598,8 +598,7 @@ struct wol_config { uint8_t no_rules_in_cmd; uint8_t result; struct host_wol_rule rule[MAX_WOL_RULES]; -}; - +} __attribute__ ((packed)); struct cmd_ds_host_sleep { struct cmd_header hdr; diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c index c3bb85e0251..45a04faa781 100644 --- a/drivers/net/wireless/orinoco/orinoco.c +++ b/drivers/net/wireless/orinoco/orinoco.c @@ -1673,7 +1673,7 @@ static void print_linkstatus(struct net_device *dev, u16 status) s = "UNKNOWN"; } - printk(KERN_INFO "%s: New link status: %s (%04x)\n", + printk(KERN_DEBUG "%s: New link status: %s (%04x)\n", dev->name, s, status); } @@ -5068,33 +5068,30 @@ static int orinoco_ioctl_set_genie(struct net_device *dev, struct orinoco_private *priv = netdev_priv(dev); u8 *buf; unsigned long flags; - int err = 0; /* cut off at IEEE80211_MAX_DATA_LEN */ if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) || (wrqu->data.length && (extra == NULL))) return -EINVAL; - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - if (wrqu->data.length) { buf = kmalloc(wrqu->data.length, GFP_KERNEL); - if (buf == NULL) { - err = -ENOMEM; - goto out; - } + if (buf == NULL) + return -ENOMEM; memcpy(buf, extra, wrqu->data.length); - kfree(priv->wpa_ie); - priv->wpa_ie = buf; - priv->wpa_ie_len = wrqu->data.length; - } else { - kfree(priv->wpa_ie); - priv->wpa_ie = NULL; - priv->wpa_ie_len = 0; + } else + buf = NULL; + + if (orinoco_lock(priv, &flags) != 0) { + kfree(buf); + return -EBUSY; } + kfree(priv->wpa_ie); + priv->wpa_ie = buf; + priv->wpa_ie_len = wrqu->data.length; + if (priv->wpa_ie) { /* Looks like wl_lkm wants to check the auth alg, and * somehow pass it to the firmware. @@ -5103,9 +5100,8 @@ static int orinoco_ioctl_set_genie(struct net_device *dev, */ } -out: orinoco_unlock(priv, &flags); - return err; + return 0; } static int orinoco_ioctl_get_genie(struct net_device *dev, diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index c6a370fa9bc..34561e6e816 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -451,8 +451,8 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) } if (err) goto err; - - } + } + break; case PDR_PRISM_ZIF_TX_IQ_CALIBRATION: priv->iq_autocal = kmalloc(data_len, GFP_KERNEL); if (!priv->iq_autocal) { @@ -745,7 +745,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry); struct p54_hdr *entry_hdr; struct p54_tx_data *entry_data; - int pad = 0; + unsigned int pad = 0, frame_len; range = (void *)info->rate_driver_data; if (range->start_addr != addr) { @@ -768,6 +768,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) __skb_unlink(entry, &priv->tx_queue); spin_unlock_irqrestore(&priv->tx_queue.lock, flags); + frame_len = entry->len; entry_hdr = (struct p54_hdr *) entry->data; entry_data = (struct p54_tx_data *) entry_hdr->data; priv->tx_stats[entry_data->hw_queue].len--; @@ -814,15 +815,28 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) info->status.ack_signal = p54_rssi_to_dbm(dev, (int)payload->ack_rssi); - if (entry_data->key_type == P54_CRYPTO_TKIPMICHAEL) { + /* Undo all changes to the frame. */ + switch (entry_data->key_type) { + case P54_CRYPTO_TKIPMICHAEL: { u8 *iv = (u8 *)(entry_data->align + pad + - entry_data->crypt_offset); + entry_data->crypt_offset); /* Restore the original TKIP IV. */ iv[2] = iv[0]; iv[0] = iv[1]; iv[1] = (iv[0] | 0x20) & 0x7f; /* WEPSeed - 8.3.2.2 */ + + frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */ + break; + } + case P54_CRYPTO_AESCCMP: + frame_len -= 8; /* remove CCMP_MIC */ + break; + case P54_CRYPTO_WEP: + frame_len -= 4; /* remove WEP_ICV */ + break; } + skb_trim(entry, frame_len); skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data)); ieee80211_tx_status_irqsafe(dev, entry); goto out; @@ -1147,7 +1161,7 @@ static int p54_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta, skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(struct p54_hdr) + sizeof(*tim), - P54_CONTROL_TYPE_TIM, GFP_KERNEL); + P54_CONTROL_TYPE_TIM, GFP_ATOMIC); if (!skb) return -ENOMEM; @@ -1610,7 +1624,7 @@ static int p54_scan(struct ieee80211_hw *dev, u16 mode, u16 dwell) err: printk(KERN_ERR "%s: frequency change failed\n", wiphy_name(dev->wiphy)); - kfree_skb(skb); + p54_free_skb(dev, skb); return -EINVAL; } @@ -2077,7 +2091,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd, algo = P54_CRYPTO_AESCCMP; break; default: - return -EINVAL; + return -EOPNOTSUPP; } } diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 6a6a72f6f82..5de2ebfb28c 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -144,11 +144,8 @@ static void p54u_tx_cb(struct urb *urb) struct sk_buff *skb = urb->context; struct ieee80211_hw *dev = (struct ieee80211_hw *) usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); - struct p54u_priv *priv = dev->priv; - skb_pull(skb, priv->common.tx_hdr_len); - if (FREE_AFTER_TX(skb)) - p54_free_skb(dev, skb); + p54_free_skb(dev, skb); } static void p54u_tx_dummy_cb(struct urb *urb) { } @@ -230,7 +227,10 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb) p54u_tx_dummy_cb, dev); usb_fill_bulk_urb(data_urb, priv->udev, usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), - skb->data, skb->len, p54u_tx_cb, skb); + skb->data, skb->len, FREE_AFTER_TX(skb) ? + p54u_tx_cb : p54u_tx_dummy_cb, skb); + addr_urb->transfer_flags |= URB_ZERO_PACKET; + data_urb->transfer_flags |= URB_ZERO_PACKET; usb_anchor_urb(addr_urb, &priv->submitted); err = usb_submit_urb(addr_urb, GFP_ATOMIC); @@ -239,7 +239,7 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb) goto out; } - usb_anchor_urb(addr_urb, &priv->submitted); + usb_anchor_urb(data_urb, &priv->submitted); err = usb_submit_urb(data_urb, GFP_ATOMIC); if (err) usb_unanchor_urb(data_urb); @@ -269,28 +269,24 @@ static void p54u_tx_lm87(struct ieee80211_hw *dev, struct sk_buff *skb) { struct p54u_priv *priv = dev->priv; struct urb *data_urb; - struct lm87_tx_hdr *hdr; - __le32 checksum; - __le32 addr = ((struct p54_hdr *)skb->data)->req_id; + struct lm87_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr); data_urb = usb_alloc_urb(0, GFP_ATOMIC); if (!data_urb) return; - checksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len); - hdr = (struct lm87_tx_hdr *)skb_push(skb, sizeof(*hdr)); - hdr->chksum = checksum; - hdr->device_addr = addr; + hdr->chksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len); + hdr->device_addr = ((struct p54_hdr *)skb->data)->req_id; usb_fill_bulk_urb(data_urb, priv->udev, usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), - skb->data, skb->len, p54u_tx_cb, skb); + hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ? + p54u_tx_cb : p54u_tx_dummy_cb, skb); data_urb->transfer_flags |= URB_ZERO_PACKET; usb_anchor_urb(data_urb, &priv->submitted); if (usb_submit_urb(data_urb, GFP_ATOMIC)) { usb_unanchor_urb(data_urb); - skb_pull(skb, sizeof(*hdr)); p54_free_skb(dev, skb); } usb_free_urb(data_urb); @@ -300,11 +296,9 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb) { struct p54u_priv *priv = dev->priv; struct urb *int_urb, *data_urb; - struct net2280_tx_hdr *hdr; + struct net2280_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr); struct net2280_reg_write *reg; int err = 0; - __le32 addr = ((struct p54_hdr *) skb->data)->req_id; - __le16 len = cpu_to_le16(skb->len); reg = kmalloc(sizeof(*reg), GFP_ATOMIC); if (!reg) @@ -327,10 +321,9 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb) reg->addr = cpu_to_le32(P54U_DEV_BASE); reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA); - hdr = (void *)skb_push(skb, sizeof(*hdr)); memset(hdr, 0, sizeof(*hdr)); - hdr->len = len; - hdr->device_addr = addr; + hdr->len = cpu_to_le16(skb->len); + hdr->device_addr = ((struct p54_hdr *) skb->data)->req_id; usb_fill_bulk_urb(int_urb, priv->udev, usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg), @@ -341,11 +334,13 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb) * free what's inside the transfer_buffer after the callback routine * has completed. */ - int_urb->transfer_flags |= URB_FREE_BUFFER; + int_urb->transfer_flags |= URB_FREE_BUFFER | URB_ZERO_PACKET; usb_fill_bulk_urb(data_urb, priv->udev, usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), - skb->data, skb->len, p54u_tx_cb, skb); + hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ? + p54u_tx_cb : p54u_tx_dummy_cb, skb); + data_urb->transfer_flags |= URB_ZERO_PACKET; usb_anchor_urb(int_urb, &priv->submitted); err = usb_submit_urb(int_urb, GFP_ATOMIC); diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 607ce9f61b5..ed93ac41297 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -1649,9 +1649,7 @@ static char *rndis_translate_scan(struct net_device *dev, char *end_buf, struct ndis_80211_bssid_ex *bssid) { -#ifdef DEBUG struct usbnet *usbdev = netdev_priv(dev); -#endif u8 *ie; char *current_val; int bssid_len, ie_len, i; diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 746a8f36b93..0709decec9c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -154,6 +154,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; + struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; struct ieee80211_rate *rate = ieee80211_get_tx_rate(rt2x00dev->hw, tx_info); const struct rt2x00_rate *hwrate; @@ -313,7 +314,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, * When preamble is enabled we should set the * preamble bit for the signal. */ - if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) + if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) txdesc->signal |= 0x08; } } diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c index c3f53a92180..3298cae1e12 100644 --- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c +++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c @@ -162,7 +162,7 @@ void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->flags)) + if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) return; cancel_delayed_work_sync(&rt2x00dev->rfkill_work); diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index 6ad6bac3770..22bc07ef2f3 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -273,6 +273,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep), buf, skb->len, rtl8187_tx_cb, skb); + urb->transfer_flags |= URB_ZERO_PACKET; usb_anchor_urb(urb, &priv->anchored); rc = usb_submit_urb(urb, GFP_ATOMIC); if (rc < 0) { diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c index 4e75e8e7fa9..78df281b297 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c +++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c @@ -285,7 +285,10 @@ static void rtl8225_rf_set_tx_power(struct ieee80211_hw *dev, int channel) ofdm_power = priv->channels[channel - 1].hw_value >> 4; cck_power = min(cck_power, (u8)11); - ofdm_power = min(ofdm_power, (u8)35); + if (ofdm_power > (u8)15) + ofdm_power = 25; + else + ofdm_power += 10; rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1); @@ -536,7 +539,10 @@ static void rtl8225z2_rf_set_tx_power(struct ieee80211_hw *dev, int channel) cck_power += priv->txpwr_base & 0xF; cck_power = min(cck_power, (u8)35); - ofdm_power = min(ofdm_power, (u8)15); + if (ofdm_power > (u8)15) + ofdm_power = 25; + else + ofdm_power += 10; ofdm_power += priv->txpwr_base >> 4; ofdm_power = min(ofdm_power, (u8)35); diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index b5db57d2fcf..17527f765b3 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -84,6 +84,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B }, /* "Driverless" devices that need ejecting */ { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER }, { USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER }, diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c index 3fac8f81d59..a70cf16ee1a 100644 --- a/drivers/parisc/sba_iommu.c +++ b/drivers/parisc/sba_iommu.c @@ -668,7 +668,7 @@ sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) * @dev: instance of PCI owned by the driver that's asking * @mask: number of address bits this PCI device can handle * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static int sba_dma_supported( struct device *dev, u64 mask) { @@ -680,8 +680,8 @@ static int sba_dma_supported( struct device *dev, u64 mask) return(0); } - /* Documentation/DMA-mapping.txt tells drivers to try 64-bit first, - * then fall back to 32-bit if that fails. + /* Documentation/PCI/PCI-DMA-mapping.txt tells drivers to try 64-bit + * first, then fall back to 32-bit if that fails. * We are just "encouraging" 32-bit DMA masks here since we can * never allow IOMMU bypass unless we add special support for ZX1. */ @@ -706,7 +706,7 @@ static int sba_dma_supported( struct device *dev, u64 mask) * @size: number of bytes to map in driver buffer. * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static dma_addr_t sba_map_single(struct device *dev, void *addr, size_t size, @@ -785,7 +785,7 @@ sba_map_single(struct device *dev, void *addr, size_t size, * @size: number of bytes mapped in driver buffer. * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, @@ -861,7 +861,7 @@ sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, * @size: number of bytes mapped in driver buffer. * @dma_handle: IOVA of new buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void *sba_alloc_consistent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) @@ -892,7 +892,7 @@ static void *sba_alloc_consistent(struct device *hwdev, size_t size, * @vaddr: virtual address IOVA of "consistent" buffer. * @dma_handler: IO virtual address of "consistent" buffer. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_free_consistent(struct device *hwdev, size_t size, void *vaddr, @@ -927,7 +927,7 @@ int dump_run_sg = 0; * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static int sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, @@ -1011,7 +1011,7 @@ sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, * @nents: number of entries in list * @direction: R/W or both. * - * See Documentation/DMA-mapping.txt + * See Documentation/PCI/PCI-DMA-mapping.txt */ static void sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 7c789f0a94d..de91ddab0a8 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -382,6 +382,11 @@ static int __init hp_wmi_input_setup(void) case KE_SW: set_bit(EV_SW, hp_wmi_input_dev->evbit); set_bit(key->keycode, hp_wmi_input_dev->swbit); + + /* Set initial dock state */ + input_report_switch(hp_wmi_input_dev, key->keycode, + hp_wmi_dock_state()); + input_sync(hp_wmi_input_dev); break; } } @@ -441,6 +446,7 @@ static int __init hp_wmi_bios_setup(struct platform_device *device) bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set; bluetooth_rfkill->user_claim_unsupported = 1; err = rfkill_register(bluetooth_rfkill); + if (err) goto register_bluetooth_error; } diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c index 366565aba86..c175e38a4cd 100644 --- a/drivers/regulator/bq24022.c +++ b/drivers/regulator/bq24022.c @@ -152,11 +152,7 @@ static void __exit bq24022_exit(void) platform_driver_unregister(&bq24022_driver); } -/* - * make sure this is probed before gpio_vbus and pda_power, - * but after asic3 or other GPIO expander drivers. - */ -subsys_initcall(bq24022_init); +module_init(bq24022_init); module_exit(bq24022_exit); MODULE_AUTHOR("Philipp Zabel"); diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 7aa35248181..5056e23e441 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1435,7 +1435,7 @@ int wm8350_register_led(struct wm8350 *wm8350, int lednum, int dcdc, int isink, struct platform_device *pdev; int ret; - if (lednum > ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) { + if (lednum >= ARRAY_SIZE(wm8350->pmic.led) || lednum < 0) { dev_err(wm8350->dev, "Invalid LED index %d\n", lednum); return -ENODEV; } diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c index acca6678cb2..49c3bfa1afd 100644 --- a/drivers/s390/net/lcs.c +++ b/drivers/s390/net/lcs.c @@ -70,7 +70,9 @@ static char debug_buffer[255]; static void lcs_tasklet(unsigned long); static void lcs_start_kernel_thread(struct work_struct *); static void lcs_get_frames_cb(struct lcs_channel *, struct lcs_buffer *); +#ifdef CONFIG_IP_MULTICAST static int lcs_send_delipm(struct lcs_card *, struct lcs_ipm_list *); +#endif /* CONFIG_IP_MULTICAST */ static int lcs_recovery(void *ptr); /** @@ -1285,6 +1287,8 @@ out: lcs_clear_thread_running_bit(card, LCS_SET_MC_THREAD); return 0; } +#endif /* CONFIG_IP_MULTICAST */ + /** * function called by net device to * handle multicast address relevant things @@ -1292,6 +1296,7 @@ out: static void lcs_set_multicast_list(struct net_device *dev) { +#ifdef CONFIG_IP_MULTICAST struct lcs_card *card; LCS_DBF_TEXT(4, trace, "setmulti"); @@ -1299,9 +1304,8 @@ lcs_set_multicast_list(struct net_device *dev) if (!lcs_set_thread_start_bit(card, LCS_SET_MC_THREAD)) schedule_work(&card->kernel_thread_starter); -} - #endif /* CONFIG_IP_MULTICAST */ +} static long lcs_check_irb_error(struct ccw_device *cdev, struct irb *irb) diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index 91ef669d98f..a1a511bdec8 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -1322,7 +1322,9 @@ static int ibmvfc_map_sg_data(struct scsi_cmnd *scmd, &evt->ext_list_token); if (!evt->ext_list) { - scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n"); + scsi_dma_unmap(scmd); + if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL) + scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n"); return -ENOMEM; } } diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 7225b6e2029..257c24115de 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1981,6 +1981,7 @@ void iscsi_pool_free(struct iscsi_pool *q) kfree(q->pool[i]); if (q->pool) kfree(q->pool); + kfree(q->queue); } EXPORT_SYMBOL_GPL(iscsi_pool_free); diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index c7acef50d5d..33a3c13fd89 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1016,6 +1016,9 @@ qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport) struct Scsi_Host *host = rport_to_shost(rport); fc_port_t *fcport = *(fc_port_t **)rport->dd_data; + if (!fcport) + return; + qla2x00_abort_fcport_cmds(fcport); /* @@ -1033,6 +1036,9 @@ qla2x00_terminate_rport_io(struct fc_rport *rport) { fc_port_t *fcport = *(fc_port_t **)rport->dd_data; + if (!fcport) + return; + /* * At this point all fcport's software-states are cleared. Perform any * final cleanup of firmware resources (PCBs and XCBs). diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index ba491335375..a336b4bc81a 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -34,6 +34,7 @@ extern void qla24xx_update_fw_options(scsi_qla_host_t *); extern void qla81xx_update_fw_options(scsi_qla_host_t *); extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *); extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *); +extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *); extern int qla2x00_loop_resync(scsi_qla_host_t *); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 9ad4d0968e5..f6368a1d302 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3562,6 +3562,9 @@ qla24xx_reset_adapter(scsi_qla_host_t *vha) WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE); RD_REG_DWORD(®->hccr); spin_unlock_irqrestore(&ha->hardware_lock, flags); + + if (IS_NOPOLLING_TYPE(ha)) + ha->isp_ops->enable_intrs(ha); } /* On sparc systems, obtain port and node WWN from firmware @@ -3847,6 +3850,10 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr) uint32_t i; struct qla_hw_data *ha = vha->hw; struct req_que *req = ha->req_q_map[0]; + + qla_printk(KERN_INFO, ha, + "FW: Loading from flash (%x)...\n", ha->flt_region_fw); + rval = QLA_SUCCESS; segments = FA_RISC_CODE_SEGMENTS; @@ -4022,8 +4029,8 @@ fail_fw_integrity: return QLA_FUNCTION_FAILED; } -int -qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +static int +qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr) { int rval; int segments, fragment; @@ -4043,12 +4050,12 @@ qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) qla_printk(KERN_ERR, ha, "Firmware images can be retrieved " "from: " QLA_FW_URL ".\n"); - /* Try to load RISC code from flash. */ - qla_printk(KERN_ERR, ha, "Attempting to load (potentially " - "outdated) firmware from flash.\n"); - return qla24xx_load_risc_flash(vha, srisc_addr); + return QLA_FUNCTION_FAILED; } + qla_printk(KERN_INFO, ha, + "FW: Loading via request-firmware...\n"); + rval = QLA_SUCCESS; segments = FA_RISC_CODE_SEGMENTS; @@ -4133,6 +4140,40 @@ fail_fw_integrity: return QLA_FUNCTION_FAILED; } +int +qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +{ + int rval; + + /* + * FW Load priority: + * 1) Firmware via request-firmware interface (.bin file). + * 2) Firmware residing in flash. + */ + rval = qla24xx_load_risc_blob(vha, srisc_addr); + if (rval == QLA_SUCCESS) + return rval; + + return qla24xx_load_risc_flash(vha, srisc_addr); +} + +int +qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +{ + int rval; + + /* + * FW Load priority: + * 1) Firmware residing in flash. + * 2) Firmware via request-firmware interface (.bin file). + */ + rval = qla24xx_load_risc_flash(vha, srisc_addr); + if (rval == QLA_SUCCESS) + return rval; + + return qla24xx_load_risc_blob(vha, srisc_addr); +} + void qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha) { diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 789fc576f22..e28ad81baf1 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1868,6 +1868,7 @@ qla24xx_disable_msix(struct qla_hw_data *ha) static int qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) { +#define MIN_MSIX_COUNT 2 int i, ret; struct msix_entry *entries; struct qla_msix_entry *qentry; @@ -1883,12 +1884,16 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) ret = pci_enable_msix(ha->pdev, entries, ha->msix_count); if (ret) { + if (ret < MIN_MSIX_COUNT) + goto msix_failed; + qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable support -- %d/%d\n" " Retry with %d vectors\n", ha->msix_count, ret, ret); ha->msix_count = ret; ret = pci_enable_msix(ha->pdev, entries, ha->msix_count); if (ret) { +msix_failed: qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable" " support, giving up -- %d/%d\n", ha->msix_count, ret); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index db4df45234a..f94ffbb98e9 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -58,14 +58,11 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) * seconds. This is to serialize actual issuing of mailbox cmds during * non ISP abort time. */ - if (!abort_active) { - if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, - mcp->tov * HZ)) { - /* Timeout occurred. Return error. */ - DEBUG2_3_11(printk("%s(%ld): cmd access timeout. " - "Exiting.\n", __func__, base_vha->host_no)); - return QLA_FUNCTION_TIMEOUT; - } + if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, mcp->tov * HZ)) { + /* Timeout occurred. Return error. */ + DEBUG2_3_11(printk("%s(%ld): cmd access timeout. " + "Exiting.\n", __func__, base_vha->host_no)); + return QLA_FUNCTION_TIMEOUT; } ha->flags.mbox_busy = 1; @@ -265,8 +262,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) } /* Allow next mbx cmd to come in. */ - if (!abort_active) - complete(&ha->mbx_cmd_comp); + complete(&ha->mbx_cmd_comp); if (rval) { DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, " diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index cf32653fe01..c11f872d3e1 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -65,8 +65,6 @@ MODULE_PARM_DESC(ql2xextended_error_logging, static void qla2x00_free_device(scsi_qla_host_t *); -static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha); - int ql2xfdmienable=1; module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xfdmienable, @@ -800,6 +798,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) if (ha->isp_ops->abort_command(vha, sp, req)) { DEBUG2(printk("%s(%ld): abort_command " "mbx failed.\n", __func__, vha->host_no)); + ret = FAILED; } else { DEBUG3(printk("%s(%ld): abort_command " "mbx success.\n", __func__, vha->host_no)); @@ -1241,9 +1240,8 @@ qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type) * supported addressing method. */ static void -qla2x00_config_dma_addressing(scsi_qla_host_t *vha) +qla2x00_config_dma_addressing(struct qla_hw_data *ha) { - struct qla_hw_data *ha = vha->hw; /* Assume a 32bit DMA mask. */ ha->flags.enable_64bit_addressing = 0; @@ -1480,7 +1478,7 @@ static struct isp_operations qla81xx_isp_ops = { .reset_adapter = qla24xx_reset_adapter, .nvram_config = qla81xx_nvram_config, .update_fw_options = qla81xx_update_fw_options, - .load_risc = qla24xx_load_risc, + .load_risc = qla81xx_load_risc, .pci_info_str = qla24xx_pci_info_str, .fw_version_str = qla24xx_fw_version_str, .intr_handler = qla24xx_intr_handler, @@ -1869,6 +1867,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) set_bit(0, (unsigned long *) ha->vp_idx_map); + qla2x00_config_dma_addressing(ha); ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp); if (!ret) { qla_printk(KERN_WARNING, ha, @@ -1888,13 +1887,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) "[ERROR] Failed to allocate memory for scsi_host\n"); ret = -ENOMEM; + qla2x00_mem_free(ha); + qla2x00_free_que(ha, req, rsp); goto probe_hw_failed; } pci_set_drvdata(pdev, base_vha); - qla2x00_config_dma_addressing(base_vha); - host = base_vha->host; base_vha->req_ques[0] = req->id; host->can_queue = req->length + 128; @@ -1917,14 +1916,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Set up the irqs */ ret = qla2x00_request_irqs(ha, rsp); if (ret) - goto probe_failed; - + goto probe_init_failed; /* Alloc arrays of request and response ring ptrs */ if (!qla2x00_alloc_queues(ha)) { qla_printk(KERN_WARNING, ha, "[ERROR] Failed to allocate memory for queue" " pointers\n"); - goto probe_failed; + goto probe_init_failed; } ha->rsp_q_map[0] = rsp; ha->req_q_map[0] = req; @@ -1997,6 +1995,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) return 0; +probe_init_failed: + qla2x00_free_que(ha, req, rsp); + ha->max_queues = 0; + probe_failed: qla2x00_free_device(base_vha); diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 303f8ee11f2..9c3b694c049 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -944,9 +944,9 @@ qla24xx_unprotect_flash(struct qla_hw_data *ha) if (!ha->fdt_wrt_disable) return; - /* Disable flash write-protection. */ + /* Disable flash write-protection, first clear SR protection bit */ qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0); - /* Some flash parts need an additional zero-write to clear bits.*/ + /* Then write zero again to clear remaining SR bits.*/ qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0); } @@ -980,12 +980,11 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, uint32_t dwords) { int ret; - uint32_t liter, miter; + uint32_t liter; uint32_t sec_mask, rest_addr; - uint32_t fdata, findex; + uint32_t fdata; dma_addr_t optrom_dma; void *optrom = NULL; - uint32_t *s, *d; struct qla_hw_data *ha = vha->hw; ret = QLA_SUCCESS; @@ -1003,17 +1002,15 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, } rest_addr = (ha->fdt_block_size >> 2) - 1; - sec_mask = (ha->optrom_size >> 2) - (ha->fdt_block_size >> 2); + sec_mask = ~rest_addr; qla24xx_unprotect_flash(ha); for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) { - - findex = faddr; - fdata = (findex & sec_mask) << 2; + fdata = (faddr & sec_mask) << 2; /* Are we at the beginning of a sector? */ - if ((findex & rest_addr) == 0) { + if ((faddr & rest_addr) == 0) { /* Do sector unprotect. */ if (ha->fdt_unprotect_sec_cmd) qla24xx_write_flash_dword(ha, @@ -1024,7 +1021,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, (fdata & 0xff00) |((fdata << 16) & 0xff0000) | ((fdata >> 16) & 0xff)); if (ret != QLA_SUCCESS) { - DEBUG9(qla_printk("Unable to flash sector: " + DEBUG9(qla_printk("Unable to erase sector: " "address=%x.\n", faddr)); break; } @@ -1033,9 +1030,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, /* Go with burst-write. */ if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) { /* Copy data to DMA'ble buffer. */ - for (miter = 0, s = optrom, d = dwptr; - miter < OPTROM_BURST_DWORDS; miter++, s++, d++) - *s = cpu_to_le32(*d); + memcpy(optrom, dwptr, OPTROM_BURST_SIZE); ret = qla2x00_load_ram(vha, optrom_dma, flash_data_addr(ha, faddr), diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 808bab6ef06..cfa4c11a479 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.00-k1" +#define QLA2XXX_VERSION "8.03.00-k2" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index d6be0762eb9..b586f27c3bd 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -244,6 +244,7 @@ struct ddb_entry { uint8_t ip_addr[ISCSI_IPADDR_SIZE]; uint8_t iscsi_name[ISCSI_NAME_SIZE]; /* 72 x48 */ uint8_t iscsi_alias[0x20]; + uint8_t isid[6]; }; /* diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 109c5f5985e..af8c3233e8a 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -342,8 +342,12 @@ static struct ddb_entry* qla4xxx_get_ddb_entry(struct scsi_qla_host *ha, DEBUG2(printk("scsi%ld: %s: Looking for ddb[%d]\n", ha->host_no, __func__, fw_ddb_index)); list_for_each_entry(ddb_entry, &ha->ddb_list, list) { - if (memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name, - ISCSI_NAME_SIZE) == 0) { + if ((memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name, + ISCSI_NAME_SIZE) == 0) && + (ddb_entry->tpgt == + le32_to_cpu(fw_ddb_entry->tgt_portal_grp)) && + (memcmp(ddb_entry->isid, fw_ddb_entry->isid, + sizeof(ddb_entry->isid)) == 0)) { found++; break; } @@ -430,6 +434,8 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha, ddb_entry->port = le16_to_cpu(fw_ddb_entry->port); ddb_entry->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp); + memcpy(ddb_entry->isid, fw_ddb_entry->isid, sizeof(ddb_entry->isid)); + memcpy(&ddb_entry->iscsi_name[0], &fw_ddb_entry->iscsi_name[0], min(sizeof(ddb_entry->iscsi_name), sizeof(fw_ddb_entry->iscsi_name))); diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 2a3671233b1..536d8e510f6 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -806,6 +806,8 @@ pci_default_setup(struct serial_private *priv, #define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 #define PCI_SUBDEVICE_ID_POCTAL232 0x0308 #define PCI_SUBDEVICE_ID_POCTAL422 0x0408 +#define PCI_VENDOR_ID_ADVANTECH 0x13fe +#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -2152,6 +2154,10 @@ static int pciserial_resume_one(struct pci_dev *dev) #endif static struct pci_device_id serial_pci_tbl[] = { + /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, + PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, + pbn_b2_8_921600 }, { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, PCI_SUBVENDOR_ID_CONNECT_TECH, PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 3e525e38a5d..7d7f576da20 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -982,7 +982,7 @@ config SERIAL_SH_SCI_CONSOLE config SERIAL_PNX8XXX bool "Enable PNX8XXX SoCs' UART Support" - depends on MIPS && SOC_PNX8550 + depends on MIPS && (SOC_PNX8550 || SOC_PNX833X) select SERIAL_CORE help If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 338cf8a08b4..92187e28608 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -180,7 +180,7 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } -static void jsm_remove_one(struct pci_dev *pdev) +static void __devexit jsm_remove_one(struct pci_dev *pdev) { struct jsm_board *brd = pci_get_drvdata(pdev); int i = 0; diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c index 3547558d2ca..324c74d2f66 100644 --- a/drivers/serial/jsm/jsm_tty.c +++ b/drivers/serial/jsm/jsm_tty.c @@ -161,6 +161,11 @@ static void jsm_tty_stop_rx(struct uart_port *port) channel->ch_bd->bd_ops->disable_receiver(channel); } +static void jsm_tty_enable_ms(struct uart_port *port) +{ + /* Nothing needed */ +} + static void jsm_tty_break(struct uart_port *port, int break_state) { unsigned long lock_flags; @@ -345,6 +350,7 @@ static struct uart_ops jsm_ops = { .start_tx = jsm_tty_start_tx, .send_xchar = jsm_tty_send_xchar, .stop_rx = jsm_tty_stop_rx, + .enable_ms = jsm_tty_enable_ms, .break_ctl = jsm_tty_break, .startup = jsm_tty_open, .shutdown = jsm_tty_close, diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c index b2001c5b145..56841fe5f48 100644 --- a/drivers/serial/mcf.c +++ b/drivers/serial/mcf.c @@ -212,10 +212,18 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, { unsigned long flags; unsigned int baud, baudclk; +#if defined(CONFIG_M5272) + unsigned int baudfr; +#endif unsigned char mr1, mr2; baud = uart_get_baud_rate(port, termios, old, 0, 230400); +#if defined(CONFIG_M5272) + baudclk = (MCF_BUSCLK / baud) / 32; + baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16; +#else baudclk = ((MCF_BUSCLK / baud) + 16) / 32; +#endif mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR; mr2 = 0; @@ -262,6 +270,9 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, writeb(mr2, port->membase + MCFUART_UMR); writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1); writeb((baudclk & 0xff), port->membase + MCFUART_UBG2); +#if defined(CONFIG_M5272) + writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD); +#endif writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER, port->membase + MCFUART_UCSR); writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 4a6fe01831a..83a185d5296 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -230,17 +230,6 @@ config SPI_XILINX # comment "SPI Protocol Masters" -config SPI_AT25 - tristate "SPI EEPROMs from most vendors" - depends on SYSFS - help - Enable this driver to get read/write support to most SPI EEPROMs, - after you configure the board init code to know about each eeprom - on your target board. - - This driver can also be built as a module. If so, the module - will be called at25. - config SPI_SPIDEV tristate "User mode SPI device driver support" depends on EXPERIMENTAL diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 5e9f521b884..5d0451936d8 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o # ... add above this line ... # SPI protocol drivers (device/link on bus) -obj-$(CONFIG_SPI_AT25) += at25.o obj-$(CONFIG_SPI_SPIDEV) += spidev.o obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o # ... add above this line ... diff --git a/drivers/staging/agnx/agnx.h b/drivers/staging/agnx/agnx.h index a75b0db3726..20f36da6247 100644 --- a/drivers/staging/agnx/agnx.h +++ b/drivers/staging/agnx/agnx.h @@ -1,6 +1,8 @@ #ifndef AGNX_H_ #define AGNX_H_ +#include <linux/io.h> + #include "xmit.h" #define PFX KBUILD_MODNAME ": " diff --git a/drivers/staging/altpciechdma/altpciechdma.c b/drivers/staging/altpciechdma/altpciechdma.c index 8e2b4ca0651..f516140ca97 100644 --- a/drivers/staging/altpciechdma/altpciechdma.c +++ b/drivers/staging/altpciechdma/altpciechdma.c @@ -531,7 +531,7 @@ static int __devinit dma_test(struct ape_dev *ape, struct pci_dev *dev) goto fail; /* allocate and map coherently-cached memory for a DMA-able buffer */ - /* @see 2.6.26.2/Documentation/DMA-mapping.txt line 318 */ + /* @see Documentation/PCI/PCI-DMA-mapping.txt, near line 318 */ buffer_virt = (u8 *)pci_alloc_consistent(dev, PAGE_SIZE * 4, &buffer_bus); if (!buffer_virt) { printk(KERN_DEBUG "Could not allocate coherent DMA buffer.\n"); @@ -846,7 +846,7 @@ static int __devinit probe(struct pci_dev *dev, const struct pci_device_id *id) #if 1 // @todo For now, disable 64-bit, because I do not understand the implications (DAC!) /* query for DMA transfer */ - /* @see Documentation/DMA-mapping.txt */ + /* @see Documentation/PCI/PCI-DMA-mapping.txt */ if (!pci_set_dma_mask(dev, DMA_64BIT_MASK)) { pci_set_consistent_dma_mask(dev, DMA_64BIT_MASK); /* use 64-bit DMA */ diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c index 6a4ceacb33f..758131cad08 100644 --- a/drivers/staging/android/binder.c +++ b/drivers/staging/android/binder.c @@ -319,6 +319,7 @@ int task_get_unused_fd_flags(struct task_struct *tsk, int flags) int fd, error; struct fdtable *fdt; unsigned long rlim_cur; + unsigned long irqs; if (files == NULL) return -ESRCH; @@ -335,12 +336,11 @@ repeat: * N.B. For clone tasks sharing a files structure, this test * will limit the total number of files that can be opened. */ - rcu_read_lock(); - if (tsk->signal) + rlim_cur = 0; + if (lock_task_sighand(tsk, &irqs)) { rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur; - else - rlim_cur = 0; - rcu_read_unlock(); + unlock_task_sighand(tsk, &irqs); + } if (fd >= rlim_cur) goto out; @@ -2649,14 +2649,14 @@ static void binder_vma_open(struct vm_area_struct *vma) { struct binder_proc *proc = vma->vm_private_data; if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) - printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot); + printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot)); dump_stack(); } static void binder_vma_close(struct vm_area_struct *vma) { struct binder_proc *proc = vma->vm_private_data; if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) - printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot); + printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot)); proc->vma = NULL; } @@ -2677,7 +2677,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) vma->vm_end = vma->vm_start + SZ_4M; if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE) - printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot); + printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot)); if (vma->vm_flags & FORBIDDEN_MMAP_FLAGS) { ret = -EPERM; diff --git a/drivers/staging/android/lowmemorykiller.txt b/drivers/staging/android/lowmemorykiller.txt new file mode 100644 index 00000000000..bd5c0c02896 --- /dev/null +++ b/drivers/staging/android/lowmemorykiller.txt @@ -0,0 +1,16 @@ +The lowmemorykiller driver lets user-space specify a set of memory thresholds +where processes with a range of oom_adj values will get killed. Specify the +minimum oom_adj values in /sys/module/lowmemorykiller/parameters/adj and the +number of free pages in /sys/module/lowmemorykiller/parameters/minfree. Both +files take a comma separated list of numbers in ascending order. + +For example, write "0,8" to /sys/module/lowmemorykiller/parameters/adj and +"1024,4096" to /sys/module/lowmemorykiller/parameters/minfree to kill processes +with a oom_adj value of 8 or higher when the free memory drops below 4096 pages +and kill processes with a oom_adj value of 0 or higher when the free memory +drops below 1024 pages. + +The driver considers memory used for caches to be free, but if a large +percentage of the cached memory is locked this can be very inaccurate +and processes may not get killed until the normal oom killer is triggered. + diff --git a/drivers/staging/android/timed_gpio.c b/drivers/staging/android/timed_gpio.c index bea68c9fc94..903270cbbe0 100644 --- a/drivers/staging/android/timed_gpio.c +++ b/drivers/staging/android/timed_gpio.c @@ -18,7 +18,7 @@ #include <linux/platform_device.h> #include <linux/hrtimer.h> #include <linux/err.h> -#include <asm/arch/gpio.h> +#include <linux/gpio.h> #include "timed_gpio.h" @@ -49,7 +49,8 @@ static ssize_t gpio_enable_show(struct device *dev, struct device_attribute *att if (hrtimer_active(&gpio_data->timer)) { ktime_t r = hrtimer_get_remaining(&gpio_data->timer); - remaining = r.tv.sec * 1000 + r.tv.nsec / 1000000; + struct timeval t = ktime_to_timeval(r); + remaining = t.tv_sec * 1000 + t.tv_usec; } else remaining = 0; diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index b501bfb9c75..b47ca1e7e38 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -1,6 +1,7 @@ config COMEDI tristate "Data Acquision support (comedi)" default N + depends on m ---help--- Enable support a wide range of data acquision devices for Linux. diff --git a/drivers/staging/meilhaus/Kconfig b/drivers/staging/meilhaus/Kconfig index 6def83fa2c9..923af22a468 100644 --- a/drivers/staging/meilhaus/Kconfig +++ b/drivers/staging/meilhaus/Kconfig @@ -4,6 +4,7 @@ menuconfig MEILHAUS tristate "Meilhaus support" + depends on m ---help--- If you have a Meilhaus card, say Y (or M) here. @@ -18,7 +19,7 @@ if MEILHAUS config ME0600 tristate "Meilhaus ME-600 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-600 family of boards that do data collection and multipurpose I/O. @@ -29,7 +30,7 @@ config ME0600 config ME0900 tristate "Meilhaus ME-900 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-900 family of boards that do data collection and multipurpose I/O. @@ -40,7 +41,7 @@ config ME0900 config ME1000 tristate "Meilhaus ME-1000 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-1000 family of boards that do data collection and multipurpose I/O. @@ -51,7 +52,7 @@ config ME1000 config ME1400 tristate "Meilhaus ME-1400 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-1400 family of boards that do data collection and multipurpose I/O. @@ -62,7 +63,7 @@ config ME1400 config ME1600 tristate "Meilhaus ME-1600 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-1600 family of boards that do data collection and multipurpose I/O. @@ -73,7 +74,7 @@ config ME1600 config ME4600 tristate "Meilhaus ME-4600 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-4600 family of boards that do data collection and multipurpose I/O. @@ -84,7 +85,7 @@ config ME4600 config ME6000 tristate "Meilhaus ME-6000 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-6000 family of boards that do data collection and multipurpose I/O. @@ -95,7 +96,7 @@ config ME6000 config ME8100 tristate "Meilhaus ME-8100 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-8100 family of boards that do data collection and multipurpose I/O. @@ -106,7 +107,7 @@ config ME8100 config ME8200 tristate "Meilhaus ME-8200 support" default n - depends on PCI + depends on PCI && m help This driver supports the Meilhaus ME-8200 family of boards that do data collection and multipurpose I/O. @@ -117,7 +118,7 @@ config ME8200 config MEDUMMY tristate "Meilhaus dummy driver" default n - depends on PCI + depends on PCI && m help This provides a dummy driver for the Meilhaus driver package diff --git a/drivers/staging/poch/poch.c b/drivers/staging/poch/poch.c index ec343ef53a8..0d111ddfabb 100644 --- a/drivers/staging/poch/poch.c +++ b/drivers/staging/poch/poch.c @@ -1026,7 +1026,7 @@ static int poch_ioctl(struct inode *inode, struct file *filp, } break; case POCH_IOC_GET_COUNTERS: - if (access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters))) + if (!access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters))) return -EFAULT; spin_lock_irq(&channel->counters_lock); diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c index 72e209276ea..22f93dd0ba0 100644 --- a/drivers/staging/usbip/usbip_common.c +++ b/drivers/staging/usbip/usbip_common.c @@ -406,8 +406,20 @@ void usbip_start_threads(struct usbip_device *ud) /* * threads are invoked per one device (per one connection). */ - kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0); - kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0); + int retval; + + retval = kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0); + if (retval < 0) { + printk(KERN_ERR "Creating tcp_rx thread for ud %p failed.\n", + ud); + return; + } + retval = kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0); + if (retval < 0) { + printk(KERN_ERR "Creating tcp_tx thread for ud %p failed.\n", + ud); + return; + } /* confirm threads are starting */ wait_for_completion(&ud->tcp_rx.thread_done); diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 8b7c419b876..8bcde8cde55 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_USB_EHCI_HCD) += host/ obj-$(CONFIG_USB_ISP116X_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ obj-$(CONFIG_USB_UHCI_HCD) += host/ +obj-$(CONFIG_USB_FHCI_HCD) += host/ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 00b47ea24f8..97ba4a985ed 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1349,6 +1349,12 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0e8d, 0x3329), /* i-blue 747, Qstarz BT-Q1000, Holux M-241 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, + { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, @@ -1370,6 +1376,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index b5775af3ba2..3f3ee135193 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -226,6 +226,7 @@ static const struct quirk_printer_struct quirk_printers[] = { { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */ { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */ { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */ + { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */ { 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */ { 0, 0 } }; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 26fece124e0..7513bb083c1 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1700,7 +1700,7 @@ const struct file_operations usbdev_file_operations = { .release = usbdev_release, }; -void usb_fs_classdev_common_remove(struct usb_device *udev) +static void usbdev_remove(struct usb_device *udev) { struct dev_state *ps; struct siginfo sinfo; @@ -1742,10 +1742,15 @@ static void usb_classdev_remove(struct usb_device *dev) { if (dev->usb_classdev) device_unregister(dev->usb_classdev); - usb_fs_classdev_common_remove(dev); } -static int usb_classdev_notify(struct notifier_block *self, +#else +#define usb_classdev_add(dev) 0 +#define usb_classdev_remove(dev) do {} while (0) + +#endif + +static int usbdev_notify(struct notifier_block *self, unsigned long action, void *dev) { switch (action) { @@ -1755,15 +1760,15 @@ static int usb_classdev_notify(struct notifier_block *self, break; case USB_DEVICE_REMOVE: usb_classdev_remove(dev); + usbdev_remove(dev); break; } return NOTIFY_OK; } static struct notifier_block usbdev_nb = { - .notifier_call = usb_classdev_notify, + .notifier_call = usbdev_notify, }; -#endif static struct cdev usb_device_cdev; @@ -1798,9 +1803,8 @@ int __init usb_devio_init(void) * to /sys/dev */ usb_classdev_class->dev_kobj = NULL; - - usb_register_notify(&usbdev_nb); #endif + usb_register_notify(&usbdev_nb); out: return retval; @@ -1811,8 +1815,8 @@ error_cdev: void usb_devio_cleanup(void) { -#ifdef CONFIG_USB_DEVICE_CLASS usb_unregister_notify(&usbdev_nb); +#ifdef CONFIG_USB_DEVICE_CLASS class_destroy(usb_classdev_class); #endif cdev_del(&usb_device_cdev); diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 98760553bc9..d0a21a5f820 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -284,7 +284,7 @@ static int usb_unbind_interface(struct device *dev) * supports "soft" unbinding. */ if (!driver->soft_unbind) - usb_disable_interface(udev, intf); + usb_disable_interface(udev, intf, false); driver->disconnect(intf); usb_cancel_queued_reset(intf); diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 507741ed448..c54fc40458b 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -128,7 +128,6 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } pci_set_master(dev); - device_set_wakeup_enable(&dev->dev, 1); retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) @@ -201,6 +200,7 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) struct usb_hcd *hcd = pci_get_drvdata(dev); int retval = 0; int wake, w; + int has_pci_pm; /* Root hub suspend should have stopped all downstream traffic, * and all bus master traffic. And done so for both the interface @@ -230,6 +230,15 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) synchronize_irq(dev->irq); + /* Downstream ports from this root hub should already be quiesced, so + * there will be no DMA activity. Now we can shut down the upstream + * link (except maybe for PME# resume signaling) and enter some PCI + * low power state, if the hardware allows. + */ + pci_disable_device(dev); + + pci_save_state(dev); + /* Don't fail on error to enable wakeup. We rely on pci code * to reject requests the hardware can't implement, rather * than coding the same thing. @@ -241,35 +250,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) wake = w; dev_dbg(&dev->dev, "wakeup: %d\n", wake); - /* Downstream ports from this root hub should already be quiesced, so - * there will be no DMA activity. Now we can shut down the upstream - * link (except maybe for PME# resume signaling) and enter some PCI - * low power state, if the hardware allows. - */ - pci_disable_device(dev); - done: - return retval; -} -EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); - -/** - * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled - * @dev: USB Host Controller being suspended - * @message: Power Management message describing this state transition - * - * Store this function in the HCD's struct pci_driver as .suspend_late. - */ -int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message) -{ - int retval = 0; - int has_pci_pm; - - /* We might already be suspended (runtime PM -- not yet written) */ - if (dev->current_state != PCI_D0) - goto done; - - pci_save_state(dev); - /* Don't change state if we don't need to */ if (message.event == PM_EVENT_FREEZE || message.event == PM_EVENT_PRETHAW) { @@ -315,7 +295,7 @@ int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message) done: return retval; } -EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late); +EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); /** * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled @@ -325,65 +305,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late); */ int usb_hcd_pci_resume_early(struct pci_dev *dev) { - int retval = 0; - pci_power_t state = dev->current_state; - -#ifdef CONFIG_PPC_PMAC - /* Reenable ASIC clocks for USB */ - if (machine_is(powermac)) { - struct device_node *of_node; - - of_node = pci_device_to_OF_node(dev); - if (of_node) - pmac_call_feature(PMAC_FTR_USB_ENABLE, - of_node, 0, 1); - } -#endif - - /* NOTE: chip docs cover clean "real suspend" cases (what Linux - * calls "standby", "suspend to RAM", and so on). There are also - * dirty cases when swsusp fakes a suspend in "shutdown" mode. - */ - if (state != PCI_D0) { -#ifdef DEBUG - int pci_pm; - u16 pmcr; - - pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM); - pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr); - pmcr &= PCI_PM_CTRL_STATE_MASK; - if (pmcr) { - /* Clean case: power to USB and to HC registers was - * maintained; remote wakeup is easy. - */ - dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr); - } else { - /* Clean: HC lost Vcc power, D0 uninitialized - * + Vaux may have preserved port and transceiver - * state ... for remote wakeup from D3cold - * + or not; HCD must reinit + re-enumerate - * - * Dirty: D0 semi-initialized cases with swsusp - * + after BIOS init - * + after Linux init (HCD statically linked) - */ - dev_dbg(&dev->dev, "resume from previous PCI D%d\n", - state); - } -#endif - - retval = pci_set_power_state(dev, PCI_D0); - } else { - /* Same basic cases: clean (powered/not), dirty */ - dev_dbg(&dev->dev, "PCI legacy resume\n"); - } - - if (retval < 0) - dev_err(&dev->dev, "can't resume: %d\n", retval); - else - pci_restore_state(dev); - - return retval; + pci_restore_state(dev); + return 0; } EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early); @@ -398,6 +321,18 @@ int usb_hcd_pci_resume(struct pci_dev *dev) struct usb_hcd *hcd; int retval; +#ifdef CONFIG_PPC_PMAC + /* Reenable ASIC clocks for USB */ + if (machine_is(powermac)) { + struct device_node *of_node; + + of_node = pci_device_to_OF_node(dev); + if (of_node) + pmac_call_feature(PMAC_FTR_USB_ENABLE, + of_node, 0, 1); + } +#endif + hcd = pci_get_drvdata(dev); if (hcd->state != HC_STATE_SUSPENDED) { dev_dbg(hcd->self.controller, @@ -405,6 +340,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev) return 0; } + pci_enable_wake(dev, PCI_D0, false); + retval = pci_enable_device(dev); if (retval < 0) { dev_err(&dev->dev, "can't re-enable after resume, %d!\n", diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 572d2cf46e8..5b94a56bec2 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev); #ifdef CONFIG_PM extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg); -extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg); extern int usb_hcd_pci_resume_early(struct pci_dev *dev); extern int usb_hcd_pci_resume(struct pci_dev *dev); #endif /* CONFIG_PM */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 94d5ee263c2..cd50d86029e 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2382,8 +2382,8 @@ static int hub_port_debounce(struct usb_hub *hub, int port1) void usb_ep0_reinit(struct usb_device *udev) { - usb_disable_endpoint(udev, 0 + USB_DIR_IN); - usb_disable_endpoint(udev, 0 + USB_DIR_OUT); + usb_disable_endpoint(udev, 0 + USB_DIR_IN, true); + usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true); usb_enable_endpoint(udev, &udev->ep0, true); } EXPORT_SYMBOL_GPL(usb_ep0_reinit); diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 2a129cb7bb5..dff5760a37f 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -717,7 +717,6 @@ static void usbfs_remove_device(struct usb_device *dev) fs_remove_file (dev->usbfs_dentry); dev->usbfs_dentry = NULL; } - usb_fs_classdev_common_remove(dev); } static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index de51667dd64..31fb204f44c 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1039,14 +1039,15 @@ static void remove_intf_ep_devs(struct usb_interface *intf) * @dev: the device whose endpoint is being disabled * @epaddr: the endpoint's address. Endpoint number for output, * endpoint number + USB_DIR_IN for input + * @reset_hardware: flag to erase any endpoint state stored in the + * controller hardware * - * Deallocates hcd/hardware state for this endpoint ... and nukes all - * pending urbs. - * - * If the HCD hasn't registered a disable() function, this sets the - * endpoint's maxpacket size to 0 to prevent further submissions. + * Disables the endpoint for URB submission and nukes all pending URBs. + * If @reset_hardware is set then also deallocates hcd/hardware state + * for the endpoint. */ -void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) +void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, + bool reset_hardware) { unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; struct usb_host_endpoint *ep; @@ -1056,15 +1057,18 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) if (usb_endpoint_out(epaddr)) { ep = dev->ep_out[epnum]; - dev->ep_out[epnum] = NULL; + if (reset_hardware) + dev->ep_out[epnum] = NULL; } else { ep = dev->ep_in[epnum]; - dev->ep_in[epnum] = NULL; + if (reset_hardware) + dev->ep_in[epnum] = NULL; } if (ep) { ep->enabled = 0; usb_hcd_flush_endpoint(dev, ep); - usb_hcd_disable_endpoint(dev, ep); + if (reset_hardware) + usb_hcd_disable_endpoint(dev, ep); } } @@ -1072,17 +1076,21 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) * usb_disable_interface -- Disable all endpoints for an interface * @dev: the device whose interface is being disabled * @intf: pointer to the interface descriptor + * @reset_hardware: flag to erase any endpoint state stored in the + * controller hardware * * Disables all the endpoints for the interface's current altsetting. */ -void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf) +void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, + bool reset_hardware) { struct usb_host_interface *alt = intf->cur_altsetting; int i; for (i = 0; i < alt->desc.bNumEndpoints; ++i) { usb_disable_endpoint(dev, - alt->endpoint[i].desc.bEndpointAddress); + alt->endpoint[i].desc.bEndpointAddress, + reset_hardware); } } @@ -1103,8 +1111,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__, skip_ep0 ? "non-ep0" : "all"); for (i = skip_ep0; i < 16; ++i) { - usb_disable_endpoint(dev, i); - usb_disable_endpoint(dev, i + USB_DIR_IN); + usb_disable_endpoint(dev, i, true); + usb_disable_endpoint(dev, i + USB_DIR_IN, true); } dev->toggle[0] = dev->toggle[1] = 0; @@ -1274,7 +1282,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) remove_intf_ep_devs(iface); usb_remove_sysfs_intf_files(iface); } - usb_disable_interface(dev, iface); + usb_disable_interface(dev, iface, true); iface->cur_altsetting = alt; @@ -1353,8 +1361,8 @@ int usb_reset_configuration(struct usb_device *dev) */ for (i = 1; i < 16; ++i) { - usb_disable_endpoint(dev, i); - usb_disable_endpoint(dev, i + USB_DIR_IN); + usb_disable_endpoint(dev, i, true); + usb_disable_endpoint(dev, i + USB_DIR_IN, true); } config = dev->actconfig; diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 386177867a8..79d8a9ea559 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -15,9 +15,10 @@ extern void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, bool reset_toggle); extern void usb_enable_interface(struct usb_device *dev, struct usb_interface *intf, bool reset_toggles); -extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr); +extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, + bool reset_hardware); extern void usb_disable_interface(struct usb_device *dev, - struct usb_interface *intf); + struct usb_interface *intf, bool reset_hardware); extern void usb_release_interface_cache(struct kref *ref); extern void usb_disable_device(struct usb_device *dev, int skip_ep0); extern int usb_deauthorize_device(struct usb_device *); @@ -151,7 +152,6 @@ extern struct usb_driver usbfs_driver; extern const struct file_operations usbfs_devices_fops; extern const struct file_operations usbdev_file_operations; extern void usbfs_conn_disc_event(void); -extern void usb_fs_classdev_common_remove(struct usb_device *udev); extern int usb_devio_init(void); extern void usb_devio_cleanup(void); diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index f2da0269e1b..5d11c291f1a 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -683,6 +683,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) struct usb_request *req = cdev->req; int value = -EOPNOTSUPP; u16 w_index = le16_to_cpu(ctrl->wIndex); + u8 intf = w_index & 0xFF; u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); struct usb_function *f = NULL; @@ -769,10 +770,10 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) goto unknown; if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) break; - f = cdev->config->interface[w_index]; + f = cdev->config->interface[intf]; if (!f) break; - if (w_value && !f->get_alt) + if (w_value && !f->set_alt) break; value = f->set_alt(f, w_index, w_value); break; @@ -781,7 +782,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) goto unknown; if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) break; - f = cdev->config->interface[w_index]; + f = cdev->config->interface[intf]; if (!f) break; /* lots of interfaces only need altsetting zero... */ @@ -808,7 +809,7 @@ unknown: */ if ((ctrl->bRequestType & USB_RECIP_MASK) == USB_RECIP_INTERFACE) { - f = cdev->config->interface[w_index]; + f = cdev->config->interface[intf]; if (f && f->setup) value = f->setup(f, ctrl); else diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index cde8fdf15d5..77c5d0a8a06 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -297,7 +297,7 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep) for (i = 0; i < 100; i ++) { temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep))); - if (!temp & EPSTAT_STALL) + if (!(temp & EPSTAT_STALL)) break; udelay(20); } diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2b476b6b3d4..2c63bfb1f8d 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -140,6 +140,7 @@ config USB_OHCI_HCD tristate "OHCI HCD support" depends on USB && USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 + select USB_OTG_UTILS if ARCH_OMAP ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's @@ -238,6 +239,23 @@ config USB_UHCI_HCD To compile this driver as a module, choose M here: the module will be called uhci-hcd. +config USB_FHCI_HCD + tristate "Freescale QE USB Host Controller support" + depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE + select FSL_GTM + select QE_USB + help + This driver enables support for Freescale QE USB Host Controller + (as found on MPC8360 and MPC8323 processors), the driver supports + Full and Low Speed USB. + +config FHCI_DEBUG + bool "Freescale QE USB Host Controller debug support" + depends on USB_FHCI_HCD && DEBUG_FS + help + Say "y" to see some FHCI debug information and statistics + throught debugfs. + config USB_U132_HCD tristate "Elan U132 Adapter Host Controller" depends on USB && USB_FTDI_ELAN diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index e5f3f20787e..f163571e33d 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -7,6 +7,11 @@ ifeq ($(CONFIG_USB_DEBUG),y) endif isp1760-objs := isp1760-hcd.o isp1760-if.o +fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \ + fhci-tds.o fhci-sched.o +ifeq ($(CONFIG_FHCI_DEBUG),y) +fhci-objs += fhci-dbg.o +endif obj-$(CONFIG_USB_WHCI_HCD) += whci/ @@ -17,6 +22,7 @@ obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o +obj-$(CONFIG_USB_FHCI_HCD) += fhci.o obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index bdc6e86e1f8..bb21fb0a496 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -230,7 +230,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) pci_read_config_word(pdev, 0x62, &port_wake); if (port_wake & 0x0001) { dev_warn(&pdev->dev, "Enabling legacy PCI PM\n"); - device_init_wakeup(&pdev->dev, 1); + device_set_wakeup_capable(&pdev->dev, 1); } } @@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .suspend_late = usb_hcd_pci_suspend_late, .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c new file mode 100644 index 00000000000..34e14edf390 --- /dev/null +++ b/drivers/usb/host/fhci-dbg.c @@ -0,0 +1,139 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/usb.h> +#include "../core/hcd.h" +#include "fhci.h" + +void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) +{ + int i; + + if (usb_er == -1) { + fhci->usb_irq_stat[12]++; + return; + } + + for (i = 0; i < 12; ++i) { + if (usb_er & (1 << i)) + fhci->usb_irq_stat[i]++; + } +} + +static int fhci_dfs_regs_show(struct seq_file *s, void *v) +{ + struct fhci_hcd *fhci = s->private; + struct fhci_regs __iomem *regs = fhci->regs; + + seq_printf(s, + "mode: 0x%x\n" "addr: 0x%x\n" + "command: 0x%x\n" "ep0: 0x%x\n" + "event: 0x%x\n" "mask: 0x%x\n" + "status: 0x%x\n" "SOF timer: %d\n" + "frame number: %d\n" + "lines status: 0x%x\n", + in_8(®s->usb_mod), in_8(®s->usb_addr), + in_8(®s->usb_comm), in_be16(®s->usb_ep[0]), + in_be16(®s->usb_event), in_be16(®s->usb_mask), + in_8(®s->usb_status), in_be16(®s->usb_sof_tmr), + in_be16(®s->usb_frame_num), + fhci_ioports_check_bus_state(fhci)); + + return 0; +} + +static int fhci_dfs_irq_stat_show(struct seq_file *s, void *v) +{ + struct fhci_hcd *fhci = s->private; + int *usb_irq_stat = fhci->usb_irq_stat; + + seq_printf(s, + "RXB: %d\n" "TXB: %d\n" "BSY: %d\n" + "SOF: %d\n" "TXE0: %d\n" "TXE1: %d\n" + "TXE2: %d\n" "TXE3: %d\n" "IDLE: %d\n" + "RESET: %d\n" "SFT: %d\n" "MSF: %d\n" + "IDLE_ONLY: %d\n", + usb_irq_stat[0], usb_irq_stat[1], usb_irq_stat[2], + usb_irq_stat[3], usb_irq_stat[4], usb_irq_stat[5], + usb_irq_stat[6], usb_irq_stat[7], usb_irq_stat[8], + usb_irq_stat[9], usb_irq_stat[10], usb_irq_stat[11], + usb_irq_stat[12]); + + return 0; +} + +static int fhci_dfs_regs_open(struct inode *inode, struct file *file) +{ + return single_open(file, fhci_dfs_regs_show, inode->i_private); +} + +static int fhci_dfs_irq_stat_open(struct inode *inode, struct file *file) +{ + return single_open(file, fhci_dfs_irq_stat_show, inode->i_private); +} + +static const struct file_operations fhci_dfs_regs_fops = { + .open = fhci_dfs_regs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations fhci_dfs_irq_stat_fops = { + .open = fhci_dfs_irq_stat_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +void fhci_dfs_create(struct fhci_hcd *fhci) +{ + struct device *dev = fhci_to_hcd(fhci)->self.controller; + + fhci->dfs_root = debugfs_create_dir(dev->bus_id, NULL); + if (!fhci->dfs_root) { + WARN_ON(1); + return; + } + + fhci->dfs_regs = debugfs_create_file("regs", S_IFREG | S_IRUGO, + fhci->dfs_root, fhci, &fhci_dfs_regs_fops); + + fhci->dfs_irq_stat = debugfs_create_file("irq_stat", + S_IFREG | S_IRUGO, fhci->dfs_root, fhci, + &fhci_dfs_irq_stat_fops); + + WARN_ON(!fhci->dfs_regs || !fhci->dfs_irq_stat); +} + +void fhci_dfs_destroy(struct fhci_hcd *fhci) +{ + if (!fhci->dfs_root) + return; + + if (fhci->dfs_irq_stat) + debugfs_remove(fhci->dfs_irq_stat); + + if (fhci->dfs_regs) + debugfs_remove(fhci->dfs_regs); + + debugfs_remove(fhci->dfs_root); +} diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c new file mode 100644 index 00000000000..ba622cc8a9b --- /dev/null +++ b/drivers/usb/host/fhci-hcd.c @@ -0,0 +1,836 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/usb.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> +#include <asm/qe.h> +#include <asm/fsl_gtm.h> +#include "../core/hcd.h" +#include "fhci.h" + +void fhci_start_sof_timer(struct fhci_hcd *fhci) +{ + fhci_dbg(fhci, "-> %s\n", __func__); + + /* clear frame_n */ + out_be16(&fhci->pram->frame_num, 0); + + out_be16(&fhci->regs->usb_sof_tmr, 0); + setbits8(&fhci->regs->usb_mod, USB_MODE_SFTE); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +void fhci_stop_sof_timer(struct fhci_hcd *fhci) +{ + fhci_dbg(fhci, "-> %s\n", __func__); + + clrbits8(&fhci->regs->usb_mod, USB_MODE_SFTE); + gtm_stop_timer16(fhci->timer); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +u16 fhci_get_sof_timer_count(struct fhci_usb *usb) +{ + return be16_to_cpu(in_be16(&usb->fhci->regs->usb_sof_tmr) / 12); +} + +/* initialize the endpoint zero */ +static u32 endpoint_zero_init(struct fhci_usb *usb, + enum fhci_mem_alloc data_mem, + u32 ring_len) +{ + u32 rc; + + rc = fhci_create_ep(usb, data_mem, ring_len); + if (rc) + return rc; + + /* inilialize endpoint registers */ + fhci_init_ep_registers(usb, usb->ep0, data_mem); + + return 0; +} + +/* enable the USB interrupts */ +void fhci_usb_enable_interrupt(struct fhci_usb *usb) +{ + struct fhci_hcd *fhci = usb->fhci; + + if (usb->intr_nesting_cnt == 1) { + /* initialize the USB interrupt */ + enable_irq(fhci_to_hcd(fhci)->irq); + + /* initialize the event register and mask register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + + /* enable the timer interrupts */ + enable_irq(fhci->timer->irq); + } else if (usb->intr_nesting_cnt > 1) + fhci_info(fhci, "unbalanced USB interrupts nesting\n"); + usb->intr_nesting_cnt--; +} + +/* diable the usb interrupt */ +void fhci_usb_disable_interrupt(struct fhci_usb *usb) +{ + struct fhci_hcd *fhci = usb->fhci; + + if (usb->intr_nesting_cnt == 0) { + /* diable the timer interrupt */ + disable_irq_nosync(fhci->timer->irq); + + /* disable the usb interrupt */ + disable_irq_nosync(fhci_to_hcd(fhci)->irq); + out_be16(&usb->fhci->regs->usb_mask, 0); + } + usb->intr_nesting_cnt++; +} + +/* enable the USB controller */ +static u32 fhci_usb_enable(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + out_be16(&usb->fhci->regs->usb_event, 0xffff); + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + setbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + + mdelay(100); + + return 0; +} + +/* disable the USB controller */ +static u32 fhci_usb_disable(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + fhci_usb_disable_interrupt(usb); + fhci_port_disable(fhci); + + /* disable the usb controller */ + if (usb->port_status == FHCI_PORT_FULL || + usb->port_status == FHCI_PORT_LOW) + fhci_device_disconnected_interrupt(fhci); + + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + + return 0; +} + +/* check the bus state by polling the QE bit on the IO ports */ +int fhci_ioports_check_bus_state(struct fhci_hcd *fhci) +{ + u8 bits = 0; + + /* check USBOE,if transmitting,exit */ + if (!gpio_get_value(fhci->gpios[GPIO_USBOE])) + return -1; + + /* check USBRP */ + if (gpio_get_value(fhci->gpios[GPIO_USBRP])) + bits |= 0x2; + + /* check USBRN */ + if (gpio_get_value(fhci->gpios[GPIO_USBRN])) + bits |= 0x1; + + return bits; +} + +static void fhci_mem_free(struct fhci_hcd *fhci) +{ + struct ed *ed; + struct ed *next_ed; + struct td *td; + struct td *next_td; + + list_for_each_entry_safe(ed, next_ed, &fhci->empty_eds, node) { + list_del(&ed->node); + kfree(ed); + } + + list_for_each_entry_safe(td, next_td, &fhci->empty_tds, node) { + list_del(&td->node); + kfree(td); + } + + kfree(fhci->vroot_hub); + fhci->vroot_hub = NULL; + + kfree(fhci->hc_list); + fhci->hc_list = NULL; +} + +static int fhci_mem_init(struct fhci_hcd *fhci) +{ + int i; + + fhci->hc_list = kzalloc(sizeof(*fhci->hc_list), GFP_KERNEL); + if (!fhci->hc_list) + goto err; + + INIT_LIST_HEAD(&fhci->hc_list->ctrl_list); + INIT_LIST_HEAD(&fhci->hc_list->bulk_list); + INIT_LIST_HEAD(&fhci->hc_list->iso_list); + INIT_LIST_HEAD(&fhci->hc_list->intr_list); + INIT_LIST_HEAD(&fhci->hc_list->done_list); + + fhci->vroot_hub = kzalloc(sizeof(*fhci->vroot_hub), GFP_KERNEL); + if (!fhci->vroot_hub) + goto err; + + INIT_LIST_HEAD(&fhci->empty_eds); + INIT_LIST_HEAD(&fhci->empty_tds); + + /* initialize work queue to handle done list */ + fhci_tasklet.data = (unsigned long)fhci; + fhci->process_done_task = &fhci_tasklet; + + for (i = 0; i < MAX_TDS; i++) { + struct td *td; + + td = kmalloc(sizeof(*td), GFP_KERNEL); + if (!td) + goto err; + fhci_recycle_empty_td(fhci, td); + } + for (i = 0; i < MAX_EDS; i++) { + struct ed *ed; + + ed = kmalloc(sizeof(*ed), GFP_KERNEL); + if (!ed) + goto err; + fhci_recycle_empty_ed(fhci, ed); + } + + fhci->active_urbs = 0; + return 0; +err: + fhci_mem_free(fhci); + return -ENOMEM; +} + +/* destroy the fhci_usb structure */ +static void fhci_usb_free(void *lld) +{ + struct fhci_usb *usb = lld; + struct fhci_hcd *fhci = usb->fhci; + + if (usb) { + fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); + fhci_ep0_free(usb); + kfree(usb->actual_frame); + kfree(usb); + } +} + +/* initialize the USB */ +static int fhci_usb_init(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + memset_io(usb->fhci->pram, 0, FHCI_PRAM_SIZE); + + usb->port_status = FHCI_PORT_DISABLED; + usb->max_frame_usage = FRAME_TIME_USAGE; + usb->sw_transaction_time = SW_FIX_TIME_BETWEEN_TRANSACTION; + + usb->actual_frame = kzalloc(sizeof(*usb->actual_frame), GFP_KERNEL); + if (!usb->actual_frame) { + fhci_usb_free(usb); + return -ENOMEM; + } + + INIT_LIST_HEAD(&usb->actual_frame->tds_list); + + /* initializing registers on chip, clear frame number */ + out_be16(&fhci->pram->frame_num, 0); + + /* clear rx state */ + out_be32(&fhci->pram->rx_state, 0); + + /* set mask register */ + usb->saved_msk = (USB_E_TXB_MASK | + USB_E_TXE1_MASK | + USB_E_IDLE_MASK | + USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK); + + out_8(&usb->fhci->regs->usb_mod, USB_MODE_HOST | USB_MODE_EN); + + /* clearing the mask register */ + out_be16(&usb->fhci->regs->usb_mask, 0); + + /* initialing the event register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + + if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) { + fhci_usb_free(usb); + return -EINVAL; + } + + return 0; +} + +/* initialize the fhci_usb struct and the corresponding data staruct */ +static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb; + + /* allocate memory for SCC data structure */ + usb = kzalloc(sizeof(*usb), GFP_KERNEL); + if (!usb) { + fhci_err(fhci, "no memory for SCC data struct\n"); + return NULL; + } + + usb->fhci = fhci; + usb->hc_list = fhci->hc_list; + usb->vroot_hub = fhci->vroot_hub; + + usb->transfer_confirm = fhci_transfer_confirm_callback; + + return usb; +} + +static int fhci_start(struct usb_hcd *hcd) +{ + int ret; + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + + ret = fhci_mem_init(fhci); + if (ret) { + fhci_err(fhci, "failed to allocate memory\n"); + goto err; + } + + fhci->usb_lld = fhci_create_lld(fhci); + if (!fhci->usb_lld) { + fhci_err(fhci, "low level driver config failed\n"); + ret = -ENOMEM; + goto err; + } + + ret = fhci_usb_init(fhci); + if (ret) { + fhci_err(fhci, "low level driver initialize failed\n"); + goto err; + } + + spin_lock_init(&fhci->lock); + + /* connect the virtual root hub */ + fhci->vroot_hub->dev_num = 1; /* this field may be needed to fix */ + fhci->vroot_hub->hub.wHubStatus = 0; + fhci->vroot_hub->hub.wHubChange = 0; + fhci->vroot_hub->port.wPortStatus = 0; + fhci->vroot_hub->port.wPortChange = 0; + + hcd->state = HC_STATE_RUNNING; + + /* + * From here on, khubd concurrently accesses the root + * hub; drivers will be talking to enumerated devices. + * (On restart paths, khubd already knows about the root + * hub and could find work as soon as we wrote FLAG_CF.) + * + * Before this point the HC was idle/ready. After, khubd + * and device drivers may start it running. + */ + fhci_usb_enable(fhci); + return 0; +err: + fhci_mem_free(fhci); + return ret; +} + +static void fhci_stop(struct usb_hcd *hcd) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + + fhci_usb_disable_interrupt(fhci->usb_lld); + fhci_usb_disable(fhci); + + fhci_usb_free(fhci->usb_lld); + fhci->usb_lld = NULL; + fhci_mem_free(fhci); +} + +static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + u32 pipe = urb->pipe; + int ret; + int i; + int size = 0; + struct urb_priv *urb_priv; + unsigned long flags; + + switch (usb_pipetype(pipe)) { + case PIPE_CONTROL: + /* 1 td fro setup,1 for ack */ + size = 2; + case PIPE_BULK: + /* one td for every 4096 bytes(can be upto 8k) */ + size += urb->transfer_buffer_length / 4096; + /* ...add for any remaining bytes... */ + if ((urb->transfer_buffer_length % 4096) != 0) + size++; + /* ..and maybe a zero length packet to wrap it up */ + if (size == 0) + size++; + else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0 + && (urb->transfer_buffer_length + % usb_maxpacket(urb->dev, pipe, + usb_pipeout(pipe))) != 0) + size++; + break; + case PIPE_ISOCHRONOUS: + size = urb->number_of_packets; + if (size <= 0) + return -EINVAL; + for (i = 0; i < urb->number_of_packets; i++) { + urb->iso_frame_desc[i].actual_length = 0; + urb->iso_frame_desc[i].status = (u32) (-EXDEV); + } + break; + case PIPE_INTERRUPT: + size = 1; + } + + /* allocate the private part of the URB */ + urb_priv = kzalloc(sizeof(*urb_priv), mem_flags); + if (!urb_priv) + return -ENOMEM; + + /* allocate the private part of the URB */ + urb_priv->tds = kzalloc(size * sizeof(struct td), mem_flags); + if (!urb_priv->tds) { + kfree(urb_priv); + return -ENOMEM; + } + + spin_lock_irqsave(&fhci->lock, flags); + + ret = usb_hcd_link_urb_to_ep(hcd, urb); + if (ret) + goto err; + + /* fill the private part of the URB */ + urb_priv->num_of_tds = size; + + urb->status = -EINPROGRESS; + urb->actual_length = 0; + urb->error_count = 0; + urb->hcpriv = urb_priv; + + fhci_queue_urb(fhci, urb); +err: + if (ret) { + kfree(urb_priv->tds); + kfree(urb_priv); + } + spin_unlock_irqrestore(&fhci->lock, flags); + return ret; +} + +/* dequeue FHCI URB */ +static int fhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + struct fhci_usb *usb = fhci->usb_lld; + int ret = -EINVAL; + unsigned long flags; + + if (!urb || !urb->dev || !urb->dev->bus) + goto out; + + spin_lock_irqsave(&fhci->lock, flags); + + ret = usb_hcd_check_unlink_urb(hcd, urb, status); + if (ret) + goto out2; + + if (usb->port_status != FHCI_PORT_DISABLED) { + struct urb_priv *urb_priv; + + /* + * flag the urb's data for deletion in some upcoming + * SF interrupt's delete list processing + */ + urb_priv = urb->hcpriv; + + if (!urb_priv || (urb_priv->state == URB_DEL)) + goto out2; + + urb_priv->state = URB_DEL; + + /* already pending? */ + urb_priv->ed->state = FHCI_ED_URB_DEL; + } else { + fhci_urb_complete_free(fhci, urb); + } + +out2: + spin_unlock_irqrestore(&fhci->lock, flags); +out: + return ret; +} + +static void fhci_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct fhci_hcd *fhci; + struct ed *ed; + unsigned long flags; + + fhci = hcd_to_fhci(hcd); + spin_lock_irqsave(&fhci->lock, flags); + ed = ep->hcpriv; + if (ed) { + while (ed->td_head != NULL) { + struct td *td = fhci_remove_td_from_ed(ed); + fhci_urb_complete_free(fhci, td->urb); + } + fhci_recycle_empty_ed(fhci, ed); + ep->hcpriv = NULL; + } + spin_unlock_irqrestore(&fhci->lock, flags); +} + +static int fhci_get_frame_number(struct usb_hcd *hcd) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + + return get_frame_num(fhci); +} + +static const struct hc_driver fhci_driver = { + .description = "fsl,usb-fhci", + .product_desc = "FHCI HOST Controller", + .hcd_priv_size = sizeof(struct fhci_hcd), + + /* generic hardware linkage */ + .irq = fhci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* basic lifecycle operation */ + .start = fhci_start, + .stop = fhci_stop, + + /* managing i/o requests and associated device resources */ + .urb_enqueue = fhci_urb_enqueue, + .urb_dequeue = fhci_urb_dequeue, + .endpoint_disable = fhci_endpoint_disable, + + /* scheduling support */ + .get_frame_number = fhci_get_frame_number, + + /* root hub support */ + .hub_status_data = fhci_hub_status_data, + .hub_control = fhci_hub_control, +}; + +static int __devinit of_fhci_probe(struct of_device *ofdev, + const struct of_device_id *ofid) +{ + struct device *dev = &ofdev->dev; + struct device_node *node = ofdev->node; + struct usb_hcd *hcd; + struct fhci_hcd *fhci; + struct resource usb_regs; + unsigned long pram_addr; + unsigned int usb_irq; + const char *sprop; + const u32 *iprop; + int size; + int ret; + int i; + int j; + + if (usb_disabled()) + return -ENODEV; + + sprop = of_get_property(node, "mode", NULL); + if (sprop && strcmp(sprop, "host")) + return -ENODEV; + + hcd = usb_create_hcd(&fhci_driver, dev, dev->bus_id); + if (!hcd) { + dev_err(dev, "could not create hcd\n"); + return -ENOMEM; + } + + fhci = hcd_to_fhci(hcd); + hcd->self.controller = dev; + dev_set_drvdata(dev, hcd); + + iprop = of_get_property(node, "hub-power-budget", &size); + if (iprop && size == sizeof(*iprop)) + hcd->power_budget = *iprop; + + /* FHCI registers. */ + ret = of_address_to_resource(node, 0, &usb_regs); + if (ret) { + dev_err(dev, "could not get regs\n"); + goto err_regs; + } + + hcd->regs = ioremap(usb_regs.start, usb_regs.end - usb_regs.start + 1); + if (!hcd->regs) { + dev_err(dev, "could not ioremap regs\n"); + ret = -ENOMEM; + goto err_regs; + } + fhci->regs = hcd->regs; + + /* Parameter RAM. */ + iprop = of_get_property(node, "reg", &size); + if (!iprop || size < sizeof(*iprop) * 4) { + dev_err(dev, "can't get pram offset\n"); + ret = -EINVAL; + goto err_pram; + } + + pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE); + if (IS_ERR_VALUE(pram_addr)) { + dev_err(dev, "failed to allocate usb pram\n"); + ret = -ENOMEM; + goto err_pram; + } + fhci->pram = cpm_muram_addr(pram_addr); + + /* GPIOs and pins */ + for (i = 0; i < NUM_GPIOS; i++) { + int gpio; + enum of_gpio_flags flags; + + gpio = of_get_gpio_flags(node, i, &flags); + fhci->gpios[i] = gpio; + fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW; + + if (!gpio_is_valid(gpio)) { + if (i < GPIO_SPEED) { + dev_err(dev, "incorrect GPIO%d: %d\n", + i, gpio); + goto err_gpios; + } else { + dev_info(dev, "assuming board doesn't have " + "%s gpio\n", i == GPIO_SPEED ? + "speed" : "power"); + continue; + } + } + + ret = gpio_request(gpio, dev->bus_id); + if (ret) { + dev_err(dev, "failed to request gpio %d", i); + goto err_gpios; + } + + if (i >= GPIO_SPEED) { + ret = gpio_direction_output(gpio, 0); + if (ret) { + dev_err(dev, "failed to set gpio %d as " + "an output\n", i); + i++; + goto err_gpios; + } + } + } + + for (j = 0; j < NUM_PINS; j++) { + fhci->pins[j] = qe_pin_request(ofdev->node, j); + if (IS_ERR(fhci->pins[j])) { + ret = PTR_ERR(fhci->pins[j]); + dev_err(dev, "can't get pin %d: %d\n", j, ret); + goto err_pins; + } + } + + /* Frame limit timer and its interrupt. */ + fhci->timer = gtm_get_timer16(); + if (IS_ERR(fhci->timer)) { + ret = PTR_ERR(fhci->timer); + dev_err(dev, "failed to request qe timer: %i", ret); + goto err_get_timer; + } + + ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq, + IRQF_DISABLED, "qe timer (usb)", hcd); + if (ret) { + dev_err(dev, "failed to request timer irq"); + goto err_timer_irq; + } + + /* USB Host interrupt. */ + usb_irq = irq_of_parse_and_map(node, 0); + if (usb_irq == NO_IRQ) { + dev_err(dev, "could not get usb irq\n"); + ret = -EINVAL; + goto err_usb_irq; + } + + /* Clocks. */ + sprop = of_get_property(node, "fsl,fullspeed-clock", NULL); + if (sprop) { + fhci->fullspeed_clk = qe_clock_source(sprop); + if (fhci->fullspeed_clk == QE_CLK_DUMMY) { + dev_err(dev, "wrong fullspeed-clock\n"); + ret = -EINVAL; + goto err_clocks; + } + } + + sprop = of_get_property(node, "fsl,lowspeed-clock", NULL); + if (sprop) { + fhci->lowspeed_clk = qe_clock_source(sprop); + if (fhci->lowspeed_clk == QE_CLK_DUMMY) { + dev_err(dev, "wrong lowspeed-clock\n"); + ret = -EINVAL; + goto err_clocks; + } + } + + if (fhci->fullspeed_clk == QE_CLK_NONE && + fhci->lowspeed_clk == QE_CLK_NONE) { + dev_err(dev, "no clocks specified\n"); + ret = -EINVAL; + goto err_clocks; + } + + dev_info(dev, "at 0x%p, irq %d\n", hcd->regs, usb_irq); + + fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); + + /* Start with full-speed, if possible. */ + if (fhci->fullspeed_clk != QE_CLK_NONE) { + fhci_config_transceiver(fhci, FHCI_PORT_FULL); + qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK); + } else { + fhci_config_transceiver(fhci, FHCI_PORT_LOW); + qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3); + } + + /* Clear and disable any pending interrupts. */ + out_be16(&fhci->regs->usb_event, 0xffff); + out_be16(&fhci->regs->usb_mask, 0); + + ret = usb_add_hcd(hcd, usb_irq, IRQF_DISABLED); + if (ret < 0) + goto err_add_hcd; + + fhci_dfs_create(fhci); + + return 0; + +err_add_hcd: +err_clocks: + irq_dispose_mapping(usb_irq); +err_usb_irq: + free_irq(fhci->timer->irq, hcd); +err_timer_irq: + gtm_put_timer16(fhci->timer); +err_get_timer: +err_pins: + while (--j >= 0) + qe_pin_free(fhci->pins[j]); +err_gpios: + while (--i >= 0) { + if (gpio_is_valid(fhci->gpios[i])) + gpio_free(fhci->gpios[i]); + } + cpm_muram_free(pram_addr); +err_pram: + iounmap(hcd->regs); +err_regs: + usb_put_hcd(hcd); + return ret; +} + +static int __devexit fhci_remove(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + int i; + int j; + + usb_remove_hcd(hcd); + free_irq(fhci->timer->irq, hcd); + gtm_put_timer16(fhci->timer); + cpm_muram_free(cpm_muram_offset(fhci->pram)); + for (i = 0; i < NUM_GPIOS; i++) { + if (!gpio_is_valid(fhci->gpios[i])) + continue; + gpio_free(fhci->gpios[i]); + } + for (j = 0; j < NUM_PINS; j++) + qe_pin_free(fhci->pins[j]); + fhci_dfs_destroy(fhci); + usb_put_hcd(hcd); + return 0; +} + +static int __devexit of_fhci_remove(struct of_device *ofdev) +{ + return fhci_remove(&ofdev->dev); +} + +static struct of_device_id of_fhci_match[] = { + { .compatible = "fsl,mpc8323-qe-usb", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_fhci_match); + +static struct of_platform_driver of_fhci_driver = { + .name = "fsl,usb-fhci", + .match_table = of_fhci_match, + .probe = of_fhci_probe, + .remove = __devexit_p(of_fhci_remove), +}; + +static int __init fhci_module_init(void) +{ + return of_register_platform_driver(&of_fhci_driver); +} +module_init(fhci_module_init); + +static void __exit fhci_module_exit(void) +{ + of_unregister_platform_driver(&of_fhci_driver); +} +module_exit(fhci_module_exit); + +MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver"); +MODULE_AUTHOR("Shlomi Gridish <gridish@freescale.com>, " + "Jerry Huang <Chang-Ming.Huang@freescale.com>, " + "Anton Vorontsov <avorontsov@ru.mvista.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c new file mode 100644 index 00000000000..0cfaedc3e12 --- /dev/null +++ b/drivers/usb/host/fhci-hub.c @@ -0,0 +1,345 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/usb.h> +#include <linux/gpio.h> +#include <asm/qe.h> +#include "../core/hcd.h" +#include "fhci.h" + +/* virtual root hub specific descriptor */ +static u8 root_hub_des[] = { + 0x09, /* blength */ + 0x29, /* bDescriptorType;hub-descriptor */ + 0x01, /* bNbrPorts */ + 0x00, /* wHubCharacteristics */ + 0x00, + 0x01, /* bPwrOn2pwrGood;2ms */ + 0x00, /* bHubContrCurrent;0mA */ + 0x00, /* DeviceRemoveable */ + 0xff, /* PortPwrCtrlMask */ +}; + +static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on) +{ + int gpio = fhci->gpios[gpio_nr]; + bool alow = fhci->alow_gpios[gpio_nr]; + + if (!gpio_is_valid(gpio)) + return; + + gpio_set_value(gpio, on ^ alow); + mdelay(5); +} + +void fhci_config_transceiver(struct fhci_hcd *fhci, + enum fhci_port_status status) +{ + fhci_dbg(fhci, "-> %s: %d\n", __func__, status); + + switch (status) { + case FHCI_PORT_POWER_OFF: + fhci_gpio_set_value(fhci, GPIO_POWER, false); + break; + case FHCI_PORT_DISABLED: + case FHCI_PORT_WAITING: + fhci_gpio_set_value(fhci, GPIO_POWER, true); + break; + case FHCI_PORT_LOW: + fhci_gpio_set_value(fhci, GPIO_SPEED, false); + break; + case FHCI_PORT_FULL: + fhci_gpio_set_value(fhci, GPIO_SPEED, true); + break; + default: + WARN_ON(1); + break; + } + + fhci_dbg(fhci, "<- %s: %d\n", __func__, status); +} + +/* disable the USB port by clearing the EN bit in the USBMOD register */ +void fhci_port_disable(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld; + enum fhci_port_status port_status; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_stop_sof_timer(fhci); + + fhci_flush_all_transmissions(usb); + + fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld); + port_status = usb->port_status; + usb->port_status = FHCI_PORT_DISABLED; + + /* Enable IDLE since we want to know if something comes along */ + usb->saved_msk |= USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + + /* check if during the disconnection process attached new device */ + if (port_status == FHCI_PORT_WAITING) + fhci_device_connected_interrupt(fhci); + usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE; + usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; + fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +/* enable the USB port by setting the EN bit in the USBMOD register */ +void fhci_port_enable(void *lld) +{ + struct fhci_usb *usb = (struct fhci_usb *)lld; + struct fhci_hcd *fhci = usb->fhci; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_config_transceiver(fhci, usb->port_status); + + if ((usb->port_status != FHCI_PORT_FULL) && + (usb->port_status != FHCI_PORT_LOW)) + fhci_start_sof_timer(fhci); + + usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE; + usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +void fhci_io_port_generate_reset(struct fhci_hcd *fhci) +{ + fhci_dbg(fhci, "-> %s\n", __func__); + + gpio_direction_output(fhci->gpios[GPIO_USBOE], 0); + gpio_direction_output(fhci->gpios[GPIO_USBTP], 0); + gpio_direction_output(fhci->gpios[GPIO_USBTN], 0); + + mdelay(5); + + qe_pin_set_dedicated(fhci->pins[PIN_USBOE]); + qe_pin_set_dedicated(fhci->pins[PIN_USBTP]); + qe_pin_set_dedicated(fhci->pins[PIN_USBTN]); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +/* generate the RESET condition on the bus */ +void fhci_port_reset(void *lld) +{ + struct fhci_usb *usb = (struct fhci_usb *)lld; + struct fhci_hcd *fhci = usb->fhci; + u8 mode; + u16 mask; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_stop_sof_timer(fhci); + /* disable the USB controller */ + mode = in_8(&fhci->regs->usb_mod); + out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN)); + + /* disable idle interrupts */ + mask = in_be16(&fhci->regs->usb_mask); + out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK)); + + fhci_io_port_generate_reset(fhci); + + /* enable interrupt on this endpoint */ + out_be16(&fhci->regs->usb_mask, mask); + + /* enable the USB controller */ + mode = in_8(&fhci->regs->usb_mod); + out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN); + fhci_start_sof_timer(fhci); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +int fhci_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + int ret = 0; + unsigned long flags; + + fhci_dbg(fhci, "-> %s\n", __func__); + + spin_lock_irqsave(&fhci->lock, flags); + + if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND | + USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) { + *buf = 1 << 1; + ret = 1; + fhci_dbg(fhci, "-- %s\n", __func__); + } + + spin_unlock_irqrestore(&fhci->lock, flags); + + fhci_dbg(fhci, "<- %s\n", __func__); + + return ret; +} + +int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + int retval = 0; + int len = 0; + struct usb_hub_status *hub_status; + struct usb_port_status *port_status; + unsigned long flags; + + spin_lock_irqsave(&fhci->lock, flags); + + fhci_dbg(fhci, "-> %s\n", __func__); + + switch (typeReq) { + case ClearHubFeature: + switch (wValue) { + case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: + break; + default: + goto error; + } + break; + case ClearPortFeature: + fhci->vroot_hub->feature &= (1 << wValue); + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_ENABLE; + fhci_port_disable(fhci); + break; + case USB_PORT_FEAT_C_ENABLE: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_ENABLE; + break; + case USB_PORT_FEAT_SUSPEND: + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_SUSPEND; + fhci_stop_sof_timer(fhci); + break; + case USB_PORT_FEAT_C_SUSPEND: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_SUSPEND; + break; + case USB_PORT_FEAT_POWER: + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_POWER; + fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); + break; + case USB_PORT_FEAT_C_CONNECTION: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_CONNECTION; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_OVERCURRENT; + break; + case USB_PORT_FEAT_C_RESET: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_RESET; + break; + default: + goto error; + } + break; + case GetHubDescriptor: + memcpy(buf, root_hub_des, sizeof(root_hub_des)); + buf[3] = 0x11; /* per-port power, no ovrcrnt */ + len = (buf[0] < wLength) ? buf[0] : wLength; + break; + case GetHubStatus: + hub_status = (struct usb_hub_status *)buf; + hub_status->wHubStatus = + cpu_to_le16(fhci->vroot_hub->hub.wHubStatus); + hub_status->wHubChange = + cpu_to_le16(fhci->vroot_hub->hub.wHubChange); + len = 4; + break; + case GetPortStatus: + port_status = (struct usb_port_status *)buf; + port_status->wPortStatus = + cpu_to_le16(fhci->vroot_hub->port.wPortStatus); + port_status->wPortChange = + cpu_to_le16(fhci->vroot_hub->port.wPortChange); + len = 4; + break; + case SetHubFeature: + switch (wValue) { + case C_HUB_OVER_CURRENT: + case C_HUB_LOCAL_POWER: + break; + default: + goto error; + } + break; + case SetPortFeature: + fhci->vroot_hub->feature |= (1 << wValue); + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_ENABLE; + fhci_port_enable(fhci->usb_lld); + break; + case USB_PORT_FEAT_SUSPEND: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_SUSPEND; + fhci_stop_sof_timer(fhci); + break; + case USB_PORT_FEAT_RESET: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_RESET; + fhci_port_reset(fhci->usb_lld); + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_ENABLE; + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_RESET; + break; + case USB_PORT_FEAT_POWER: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_POWER; + fhci_config_transceiver(fhci, FHCI_PORT_WAITING); + break; + default: + goto error; + } + break; + default: +error: + retval = -EPIPE; + } + + fhci_dbg(fhci, "<- %s\n", __func__); + + spin_unlock_irqrestore(&fhci->lock, flags); + + return retval; +} diff --git a/drivers/usb/host/fhci-mem.c b/drivers/usb/host/fhci-mem.c new file mode 100644 index 00000000000..2c0736c9971 --- /dev/null +++ b/drivers/usb/host/fhci-mem.c @@ -0,0 +1,113 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/list.h> +#include <linux/usb.h> +#include "../core/hcd.h" +#include "fhci.h" + +static void init_td(struct td *td) +{ + memset(td, 0, sizeof(*td)); + INIT_LIST_HEAD(&td->node); + INIT_LIST_HEAD(&td->frame_lh); +} + +static void init_ed(struct ed *ed) +{ + memset(ed, 0, sizeof(*ed)); + INIT_LIST_HEAD(&ed->td_list); + INIT_LIST_HEAD(&ed->node); +} + +static struct td *get_empty_td(struct fhci_hcd *fhci) +{ + struct td *td; + + if (!list_empty(&fhci->empty_tds)) { + td = list_entry(fhci->empty_tds.next, struct td, node); + list_del(fhci->empty_tds.next); + } else { + td = kmalloc(sizeof(*td), GFP_ATOMIC); + if (!td) + fhci_err(fhci, "No memory to allocate to TD\n"); + else + init_td(td); + } + + return td; +} + +void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td) +{ + init_td(td); + list_add(&td->node, &fhci->empty_tds); +} + +struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci) +{ + struct ed *ed; + + if (!list_empty(&fhci->empty_eds)) { + ed = list_entry(fhci->empty_eds.next, struct ed, node); + list_del(fhci->empty_eds.next); + } else { + ed = kmalloc(sizeof(*ed), GFP_ATOMIC); + if (!ed) + fhci_err(fhci, "No memory to allocate to ED\n"); + else + init_ed(ed); + } + + return ed; +} + +void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed) +{ + init_ed(ed); + list_add(&ed->node, &fhci->empty_eds); +} + +struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb, + struct urb_priv *urb_priv, struct ed *ed, u16 index, + enum fhci_ta_type type, int toggle, u8 *data, u32 len, + u16 interval, u16 start_frame, bool ioc) +{ + struct td *td = get_empty_td(fhci); + + if (!td) + return NULL; + + td->urb = urb; + td->ed = ed; + td->type = type; + td->toggle = toggle; + td->data = data; + td->len = len; + td->iso_index = index; + td->interval = interval; + td->start_frame = start_frame; + td->ioc = ioc; + td->status = USB_TD_OK; + + urb_priv->tds[index] = td; + + return td; +} diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c new file mode 100644 index 00000000000..b0a1446ba29 --- /dev/null +++ b/drivers/usb/host/fhci-q.c @@ -0,0 +1,284 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/usb.h> +#include "../core/hcd.h" +#include "fhci.h" + +/* maps the hardware error code to the USB error code */ +static int status_to_error(u32 status) +{ + if (status == USB_TD_OK) + return 0; + else if (status & USB_TD_RX_ER_CRC) + return -EILSEQ; + else if (status & USB_TD_RX_ER_NONOCT) + return -EPROTO; + else if (status & USB_TD_RX_ER_OVERUN) + return -ECOMM; + else if (status & USB_TD_RX_ER_BITSTUFF) + return -EPROTO; + else if (status & USB_TD_RX_ER_PID) + return -EILSEQ; + else if (status & (USB_TD_TX_ER_NAK | USB_TD_TX_ER_TIMEOUT)) + return -ETIMEDOUT; + else if (status & USB_TD_TX_ER_STALL) + return -EPIPE; + else if (status & USB_TD_TX_ER_UNDERUN) + return -ENOSR; + else if (status & USB_TD_RX_DATA_UNDERUN) + return -EREMOTEIO; + else if (status & USB_TD_RX_DATA_OVERUN) + return -EOVERFLOW; + else + return -EINVAL; +} + +void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td) +{ + list_add_tail(&td->frame_lh, &frame->tds_list); +} + +void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number) +{ + int i; + + for (i = 0; i < number; i++) { + struct td *td = td_list[i]; + list_add_tail(&td->node, &ed->td_list); + } + if (ed->td_head == NULL) + ed->td_head = td_list[0]; +} + +static struct td *peek_td_from_ed(struct ed *ed) +{ + struct td *td; + + if (!list_empty(&ed->td_list)) + td = list_entry(ed->td_list.next, struct td, node); + else + td = NULL; + + return td; +} + +struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame) +{ + struct td *td; + + if (!list_empty(&frame->tds_list)) { + td = list_entry(frame->tds_list.next, struct td, frame_lh); + list_del_init(frame->tds_list.next); + } else + td = NULL; + + return td; +} + +struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame) +{ + struct td *td; + + if (!list_empty(&frame->tds_list)) + td = list_entry(frame->tds_list.next, struct td, frame_lh); + else + td = NULL; + + return td; +} + +struct td *fhci_remove_td_from_ed(struct ed *ed) +{ + struct td *td; + + if (!list_empty(&ed->td_list)) { + td = list_entry(ed->td_list.next, struct td, node); + list_del_init(ed->td_list.next); + + /* if this TD was the ED's head, find next TD */ + if (!list_empty(&ed->td_list)) + ed->td_head = list_entry(ed->td_list.next, struct td, + node); + else + ed->td_head = NULL; + } else + td = NULL; + + return td; +} + +struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list) +{ + struct td *td; + + if (!list_empty(&p_list->done_list)) { + td = list_entry(p_list->done_list.next, struct td, node); + list_del_init(p_list->done_list.next); + } else + td = NULL; + + return td; +} + +void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed) +{ + struct td *td; + + td = ed->td_head; + list_del_init(&td->node); + + /* If this TD was the ED's head,find next TD */ + if (!list_empty(&ed->td_list)) + ed->td_head = list_entry(ed->td_list.next, struct td, node); + else { + ed->td_head = NULL; + ed->state = FHCI_ED_SKIP; + } + ed->toggle_carry = td->toggle; + list_add_tail(&td->node, &usb->hc_list->done_list); + if (td->ioc) + usb->transfer_confirm(usb->fhci); +} + +/* free done FHCI URB resource such as ED and TD */ +static void free_urb_priv(struct fhci_hcd *fhci, struct urb *urb) +{ + int i; + struct urb_priv *urb_priv = urb->hcpriv; + struct ed *ed = urb_priv->ed; + + for (i = 0; i < urb_priv->num_of_tds; i++) { + list_del_init(&urb_priv->tds[i]->node); + fhci_recycle_empty_td(fhci, urb_priv->tds[i]); + } + + /* if this TD was the ED's head,find the next TD */ + if (!list_empty(&ed->td_list)) + ed->td_head = list_entry(ed->td_list.next, struct td, node); + else + ed->td_head = NULL; + + kfree(urb_priv->tds); + kfree(urb_priv); + urb->hcpriv = NULL; + + /* if this TD was the ED's head,find next TD */ + if (ed->td_head == NULL) + list_del_init(&ed->node); + fhci->active_urbs--; +} + +/* this routine called to complete and free done URB */ +void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb) +{ + free_urb_priv(fhci, urb); + + if (urb->status == -EINPROGRESS) { + if (urb->actual_length != urb->transfer_buffer_length && + urb->transfer_flags & URB_SHORT_NOT_OK) + urb->status = -EREMOTEIO; + else + urb->status = 0; + } + + usb_hcd_unlink_urb_from_ep(fhci_to_hcd(fhci), urb); + + spin_unlock(&fhci->lock); + + usb_hcd_giveback_urb(fhci_to_hcd(fhci), urb, urb->status); + + spin_lock(&fhci->lock); +} + +/* + * caculate transfer length/stats and update the urb + * Precondition: irqsafe(only for urb-?status locking) + */ +void fhci_done_td(struct urb *urb, struct td *td) +{ + struct ed *ed = td->ed; + u32 cc = td->status; + + /* ISO...drivers see per-TD length/status */ + if (ed->mode == FHCI_TF_ISO) { + u32 len; + if (!(urb->transfer_flags & URB_SHORT_NOT_OK && + cc == USB_TD_RX_DATA_UNDERUN)) + cc = USB_TD_OK; + + if (usb_pipeout(urb->pipe)) + len = urb->iso_frame_desc[td->iso_index].length; + else + len = td->actual_len; + + urb->actual_length += len; + urb->iso_frame_desc[td->iso_index].actual_length = len; + urb->iso_frame_desc[td->iso_index].status = + status_to_error(cc); + } + + /* BULK,INT,CONTROL... drivers see aggregate length/status, + * except that "setup" bytes aren't counted and "short" transfers + * might not be reported as errors. + */ + else { + if (td->error_cnt >= 3) + urb->error_count = 3; + + /* control endpoint only have soft stalls */ + + /* update packet status if needed(short may be ok) */ + if (!(urb->transfer_flags & URB_SHORT_NOT_OK) && + cc == USB_TD_RX_DATA_UNDERUN) { + ed->state = FHCI_ED_OPER; + cc = USB_TD_OK; + } + if (cc != USB_TD_OK) { + if (urb->status == -EINPROGRESS) + urb->status = status_to_error(cc); + } + + /* count all non-empty packets except control SETUP packet */ + if (td->type != FHCI_TA_SETUP || td->iso_index != 0) + urb->actual_length += td->actual_len; + } +} + +/* there are some pedning request to unlink */ +void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed) +{ + struct td *td = peek_td_from_ed(ed); + struct urb *urb = td->urb; + struct urb_priv *urb_priv = urb->hcpriv; + + if (urb_priv->state == URB_DEL) { + td = fhci_remove_td_from_ed(ed); + /* HC may have partly processed this TD */ + if (td->status != USB_TD_INPROGRESS) + fhci_done_td(urb, td); + + /* URB is done;clean up */ + if (++(urb_priv->tds_cnt) == urb_priv->num_of_tds) + fhci_urb_complete_free(fhci, urb); + } +} diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c new file mode 100644 index 00000000000..bb63b68ddb7 --- /dev/null +++ b/drivers/usb/host/fhci-sched.c @@ -0,0 +1,888 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/usb.h> +#include <asm/qe.h> +#include <asm/fsl_gtm.h> +#include "../core/hcd.h" +#include "fhci.h" + +static void recycle_frame(struct fhci_usb *usb, struct packet *pkt) +{ + pkt->data = NULL; + pkt->len = 0; + pkt->status = USB_TD_OK; + pkt->info = 0; + pkt->priv_data = NULL; + + cq_put(usb->ep0->empty_frame_Q, pkt); +} + +/* confirm submitted packet */ +void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt) +{ + struct td *td; + struct packet *td_pkt; + struct ed *ed; + u32 trans_len; + bool td_done = false; + + td = fhci_remove_td_from_frame(usb->actual_frame); + td_pkt = td->pkt; + trans_len = pkt->len; + td->status = pkt->status; + if (td->type == FHCI_TA_IN && td_pkt->info & PKT_DUMMY_PACKET) { + if ((td->data + td->actual_len) && trans_len) + memcpy(td->data + td->actual_len, pkt->data, + trans_len); + cq_put(usb->ep0->dummy_packets_Q, pkt->data); + } + + recycle_frame(usb, pkt); + + ed = td->ed; + if (ed->mode == FHCI_TF_ISO) { + if (ed->td_list.next->next != &ed->td_list) { + struct td *td_next = + list_entry(ed->td_list.next->next, struct td, + node); + + td_next->start_frame = usb->actual_frame->frame_num; + } + td->actual_len = trans_len; + td_done = true; + } else if ((td->status & USB_TD_ERROR) && + !(td->status & USB_TD_TX_ER_NAK)) { + /* + * There was an error on the transaction (but not NAK). + * If it is fatal error (data underrun, stall, bad pid or 3 + * errors exceeded), mark this TD as done. + */ + if ((td->status & USB_TD_RX_DATA_UNDERUN) || + (td->status & USB_TD_TX_ER_STALL) || + (td->status & USB_TD_RX_ER_PID) || + (++td->error_cnt >= 3)) { + ed->state = FHCI_ED_HALTED; + td_done = true; + + if (td->status & USB_TD_RX_DATA_UNDERUN) { + fhci_dbg(usb->fhci, "td err fu\n"); + td->toggle = !td->toggle; + td->actual_len += trans_len; + } else { + fhci_dbg(usb->fhci, "td err f!u\n"); + } + } else { + fhci_dbg(usb->fhci, "td err !f\n"); + /* it is not a fatal error -retry this transaction */ + td->nak_cnt = 0; + td->error_cnt++; + td->status = USB_TD_OK; + } + } else if (td->status & USB_TD_TX_ER_NAK) { + /* there was a NAK response */ + fhci_vdbg(usb->fhci, "td nack\n"); + td->nak_cnt++; + td->error_cnt = 0; + td->status = USB_TD_OK; + } else { + /* there was no error on transaction */ + td->error_cnt = 0; + td->nak_cnt = 0; + td->toggle = !td->toggle; + td->actual_len += trans_len; + + if (td->len == td->actual_len) + td_done = true; + } + + if (td_done) + fhci_move_td_from_ed_to_done_list(usb, ed); +} + +/* + * Flush all transmitted packets from BDs + * This routine is called when disabling the USB port to flush all + * transmissions that are allready scheduled in the BDs + */ +void fhci_flush_all_transmissions(struct fhci_usb *usb) +{ + u8 mode; + struct td *td; + + mode = in_8(&usb->fhci->regs->usb_mod); + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + + fhci_flush_bds(usb); + + while ((td = fhci_peek_td_from_frame(usb->actual_frame)) != NULL) { + struct packet *pkt = td->pkt; + + pkt->status = USB_TD_TX_ER_TIMEOUT; + fhci_transaction_confirm(usb, pkt); + } + + usb->actual_frame->frame_status = FRAME_END_TRANSMISSION; + + /* reset the event register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + /* enable the USB controller */ + out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN); +} + +/* + * This function forms the packet and transmit the packet. This function + * will handle all endpoint type:ISO,interrupt,control and bulk + */ +static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td) +{ + u32 fw_transaction_time, len = 0; + struct packet *pkt; + u8 *data = NULL; + + /* calcalate data address,len and toggle and then add the transaction */ + if (td->toggle == USB_TD_TOGGLE_CARRY) + td->toggle = ed->toggle_carry; + + switch (ed->mode) { + case FHCI_TF_ISO: + len = td->len; + if (td->type != FHCI_TA_IN) + data = td->data; + break; + case FHCI_TF_CTRL: + case FHCI_TF_BULK: + len = min(td->len - td->actual_len, ed->max_pkt_size); + if (!((td->type == FHCI_TA_IN) && + ((len + td->actual_len) == td->len))) + data = td->data + td->actual_len; + break; + case FHCI_TF_INTR: + len = min(td->len, ed->max_pkt_size); + if (!((td->type == FHCI_TA_IN) && + ((td->len + CRC_SIZE) >= ed->max_pkt_size))) + data = td->data; + break; + default: + break; + } + + if (usb->port_status == FHCI_PORT_FULL) + fw_transaction_time = (((len + PROTOCOL_OVERHEAD) * 11) >> 4); + else + fw_transaction_time = ((len + PROTOCOL_OVERHEAD) * 6); + + /* check if there's enough space in this frame to submit this TD */ + if (usb->actual_frame->total_bytes + len + PROTOCOL_OVERHEAD >= + usb->max_bytes_per_frame) { + fhci_vdbg(usb->fhci, "not enough space in this frame: " + "%d %d %d\n", usb->actual_frame->total_bytes, len, + usb->max_bytes_per_frame); + return -1; + } + + /* check if there's enough time in this frame to submit this TD */ + if (usb->actual_frame->frame_status != FRAME_IS_PREPARED && + (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION || + (fw_transaction_time + usb->sw_transaction_time >= + 1000 - fhci_get_sof_timer_count(usb)))) { + fhci_dbg(usb->fhci, "not enough time in this frame\n"); + return -1; + } + + /* update frame object fields before transmitting */ + pkt = cq_get(usb->ep0->empty_frame_Q); + if (!pkt) { + fhci_dbg(usb->fhci, "there is no empty frame\n"); + return -1; + } + td->pkt = pkt; + + pkt->info = 0; + if (data == NULL) { + data = cq_get(usb->ep0->dummy_packets_Q); + BUG_ON(!data); + pkt->info = PKT_DUMMY_PACKET; + } + pkt->data = data; + pkt->len = len; + pkt->status = USB_TD_OK; + /* update TD status field before transmitting */ + td->status = USB_TD_INPROGRESS; + /* update actual frame time object with the actual transmission */ + usb->actual_frame->total_bytes += (len + PROTOCOL_OVERHEAD); + fhci_add_td_to_frame(usb->actual_frame, td); + + if (usb->port_status != FHCI_PORT_FULL && + usb->port_status != FHCI_PORT_LOW) { + pkt->status = USB_TD_TX_ER_TIMEOUT; + pkt->len = 0; + fhci_transaction_confirm(usb, pkt); + } else if (fhci_host_transaction(usb, pkt, td->type, ed->dev_addr, + ed->ep_addr, ed->mode, ed->speed, td->toggle)) { + /* remove TD from actual frame */ + list_del_init(&td->frame_lh); + td->status = USB_TD_OK; + if (pkt->info & PKT_DUMMY_PACKET) + cq_put(usb->ep0->dummy_packets_Q, pkt->data); + recycle_frame(usb, pkt); + usb->actual_frame->total_bytes -= (len + PROTOCOL_OVERHEAD); + fhci_err(usb->fhci, "host transaction failed\n"); + return -1; + } + + return len; +} + +static void move_head_to_tail(struct list_head *list) +{ + struct list_head *node = list->next; + + if (!list_empty(list)) { + list_del(node); + list_add_tail(node, list); + } +} + +/* + * This function goes through the endpoint list and schedules the + * transactions within this list + */ +static int scan_ed_list(struct fhci_usb *usb, + struct list_head *list, enum fhci_tf_mode list_type) +{ + static const int frame_part[4] = { + [FHCI_TF_CTRL] = MAX_BYTES_PER_FRAME, + [FHCI_TF_ISO] = (MAX_BYTES_PER_FRAME * + MAX_PERIODIC_FRAME_USAGE) / 100, + [FHCI_TF_BULK] = MAX_BYTES_PER_FRAME, + [FHCI_TF_INTR] = (MAX_BYTES_PER_FRAME * + MAX_PERIODIC_FRAME_USAGE) / 100 + }; + struct ed *ed; + struct td *td; + int ans = 1; + u32 save_transaction_time = usb->sw_transaction_time; + + list_for_each_entry(ed, list, node) { + td = ed->td_head; + + if (!td || (td && td->status == USB_TD_INPROGRESS)) + continue; + + if (ed->state != FHCI_ED_OPER) { + if (ed->state == FHCI_ED_URB_DEL) { + td->status = USB_TD_OK; + fhci_move_td_from_ed_to_done_list(usb, ed); + ed->state = FHCI_ED_SKIP; + } + continue; + } + + /* + * if it isn't interrupt pipe or it is not iso pipe and the + * interval time passed + */ + if ((list_type == FHCI_TF_INTR || list_type == FHCI_TF_ISO) && + (((usb->actual_frame->frame_num - + td->start_frame) & 0x7ff) < td->interval)) + continue; + + if (add_packet(usb, ed, td) < 0) + continue; + + /* update time stamps in the TD */ + td->start_frame = usb->actual_frame->frame_num; + usb->sw_transaction_time += save_transaction_time; + + if (usb->actual_frame->total_bytes >= + usb->max_bytes_per_frame) { + usb->actual_frame->frame_status = + FRAME_DATA_END_TRANSMISSION; + fhci_push_dummy_bd(usb->ep0); + ans = 0; + break; + } + + if (usb->actual_frame->total_bytes >= frame_part[list_type]) + break; + } + + /* be fair to each ED(move list head around) */ + move_head_to_tail(list); + usb->sw_transaction_time = save_transaction_time; + + return ans; +} + +static u32 rotate_frames(struct fhci_usb *usb) +{ + struct fhci_hcd *fhci = usb->fhci; + + if (!list_empty(&usb->actual_frame->tds_list)) { + if ((((in_be16(&fhci->pram->frame_num) & 0x07ff) - + usb->actual_frame->frame_num) & 0x7ff) > 5) + fhci_flush_actual_frame(usb); + else + return -EINVAL; + } + + usb->actual_frame->frame_status = FRAME_IS_PREPARED; + usb->actual_frame->frame_num = in_be16(&fhci->pram->frame_num) & 0x7ff; + usb->actual_frame->total_bytes = 0; + + return 0; +} + +/* + * This function schedule the USB transaction and will process the + * endpoint in the following order: iso, interrupt, control and bulk. + */ +void fhci_schedule_transactions(struct fhci_usb *usb) +{ + int left = 1; + + if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION) + if (rotate_frames(usb) != 0) + return; + + if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION) + return; + + if (usb->actual_frame->total_bytes == 0) { + /* + * schedule the next available ISO transfer + *or next stage of the ISO transfer + */ + scan_ed_list(usb, &usb->hc_list->iso_list, FHCI_TF_ISO); + + /* + * schedule the next available interrupt transfer or + * the next stage of the interrupt transfer + */ + scan_ed_list(usb, &usb->hc_list->intr_list, FHCI_TF_INTR); + + /* + * schedule the next available control transfer + * or the next stage of the control transfer + */ + left = scan_ed_list(usb, &usb->hc_list->ctrl_list, + FHCI_TF_CTRL); + } + + /* + * schedule the next available bulk transfer or the next stage of the + * bulk transfer + */ + if (left > 0) + scan_ed_list(usb, &usb->hc_list->bulk_list, FHCI_TF_BULK); +} + +/* Handles SOF interrupt */ +static void sof_interrupt(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + if ((usb->port_status == FHCI_PORT_DISABLED) && + (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_CONNECTION) && + !(usb->vroot_hub->port.wPortChange & USB_PORT_STAT_C_CONNECTION)) { + if (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_LOW_SPEED) + usb->port_status = FHCI_PORT_LOW; + else + usb->port_status = FHCI_PORT_FULL; + /* Disable IDLE */ + usb->saved_msk &= ~USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + } + + gtm_set_exact_timer16(fhci->timer, usb->max_frame_usage, false); + + fhci_host_transmit_actual_frame(usb); + usb->actual_frame->frame_status = FRAME_IS_TRANSMITTED; + + fhci_schedule_transactions(usb); +} + +/* Handles device disconnected interrupt on port */ +void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_usb_disable_interrupt(usb); + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + usb->port_status = FHCI_PORT_DISABLED; + + fhci_stop_sof_timer(fhci); + + /* Enable IDLE since we want to know if something comes along */ + usb->saved_msk |= USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + + usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_CONNECTION; + usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_CONNECTION; + usb->max_bytes_per_frame = 0; + fhci_usb_enable_interrupt(usb); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +/* detect a new device connected on the USB port */ +void fhci_device_connected_interrupt(struct fhci_hcd *fhci) +{ + + struct fhci_usb *usb = fhci->usb_lld; + int state; + int ret; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_usb_disable_interrupt(usb); + state = fhci_ioports_check_bus_state(fhci); + + /* low-speed device was connected to the USB port */ + if (state == 1) { + ret = qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3); + if (ret) { + fhci_warn(fhci, "Low-Speed device is not supported, " + "try use BRGx\n"); + goto out; + } + + usb->port_status = FHCI_PORT_LOW; + setbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + usb->vroot_hub->port.wPortStatus |= + (USB_PORT_STAT_LOW_SPEED | + USB_PORT_STAT_CONNECTION); + usb->vroot_hub->port.wPortChange |= + USB_PORT_STAT_C_CONNECTION; + usb->max_bytes_per_frame = + (MAX_BYTES_PER_FRAME >> 3) - 7; + fhci_port_enable(usb); + } else if (state == 2) { + ret = qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK); + if (ret) { + fhci_warn(fhci, "Full-Speed device is not supported, " + "try use CLKx\n"); + goto out; + } + + usb->port_status = FHCI_PORT_FULL; + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + usb->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_LOW_SPEED; + usb->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_CONNECTION; + usb->vroot_hub->port.wPortChange |= + USB_PORT_STAT_C_CONNECTION; + usb->max_bytes_per_frame = (MAX_BYTES_PER_FRAME - 15); + fhci_port_enable(usb); + } +out: + fhci_usb_enable_interrupt(usb); + fhci_dbg(fhci, "<- %s\n", __func__); +} + +irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd) +{ + struct usb_hcd *hcd = _hcd; + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + struct fhci_usb *usb = fhci->usb_lld; + + spin_lock(&fhci->lock); + + gtm_set_exact_timer16(fhci->timer, 1000, false); + + if (usb->actual_frame->frame_status == FRAME_IS_TRANSMITTED) { + usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION; + fhci_push_dummy_bd(usb->ep0); + } + + fhci_schedule_transactions(usb); + + spin_unlock(&fhci->lock); + + return IRQ_HANDLED; +} + +/* Cancel transmission on the USB endpoint */ +static void abort_transmission(struct fhci_usb *usb) +{ + fhci_dbg(usb->fhci, "-> %s\n", __func__); + /* issue stop Tx command */ + qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0); + /* flush Tx FIFOs */ + out_8(&usb->fhci->regs->usb_comm, USB_CMD_FLUSH_FIFO | EP_ZERO); + udelay(1000); + /* reset Tx BDs */ + fhci_flush_bds(usb); + /* issue restart Tx command */ + qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0); + fhci_dbg(usb->fhci, "<- %s\n", __func__); +} + +irqreturn_t fhci_irq(struct usb_hcd *hcd) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + struct fhci_usb *usb; + u16 usb_er = 0; + unsigned long flags; + + spin_lock_irqsave(&fhci->lock, flags); + + usb = fhci->usb_lld; + + usb_er |= in_be16(&usb->fhci->regs->usb_event) & + in_be16(&usb->fhci->regs->usb_mask); + + /* clear event bits for next time */ + out_be16(&usb->fhci->regs->usb_event, usb_er); + + fhci_dbg_isr(fhci, usb_er); + + if (usb_er & USB_E_RESET_MASK) { + if ((usb->port_status == FHCI_PORT_FULL) || + (usb->port_status == FHCI_PORT_LOW)) { + fhci_device_disconnected_interrupt(fhci); + usb_er &= ~USB_E_IDLE_MASK; + } else if (usb->port_status == FHCI_PORT_WAITING) { + usb->port_status = FHCI_PORT_DISCONNECTING; + + /* Turn on IDLE since we want to disconnect */ + usb->saved_msk |= USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_event, + usb->saved_msk); + } else if (usb->port_status == FHCI_PORT_DISABLED) { + if (fhci_ioports_check_bus_state(fhci) == 1 && + usb->port_status != FHCI_PORT_LOW && + usb->port_status != FHCI_PORT_FULL) + fhci_device_connected_interrupt(fhci); + } + usb_er &= ~USB_E_RESET_MASK; + } + + if (usb_er & USB_E_MSF_MASK) { + abort_transmission(fhci->usb_lld); + usb_er &= ~USB_E_MSF_MASK; + } + + if (usb_er & (USB_E_SOF_MASK | USB_E_SFT_MASK)) { + sof_interrupt(fhci); + usb_er &= ~(USB_E_SOF_MASK | USB_E_SFT_MASK); + } + + if (usb_er & USB_E_TXB_MASK) { + fhci_tx_conf_interrupt(fhci->usb_lld); + usb_er &= ~USB_E_TXB_MASK; + } + + if (usb_er & USB_E_TXE1_MASK) { + fhci_tx_conf_interrupt(fhci->usb_lld); + usb_er &= ~USB_E_TXE1_MASK; + } + + if (usb_er & USB_E_IDLE_MASK) { + if (usb->port_status == FHCI_PORT_DISABLED && + usb->port_status != FHCI_PORT_LOW && + usb->port_status != FHCI_PORT_FULL) { + usb_er &= ~USB_E_RESET_MASK; + fhci_device_connected_interrupt(fhci); + } else if (usb->port_status == + FHCI_PORT_DISCONNECTING) { + /* XXX usb->port_status = FHCI_PORT_WAITING; */ + /* Disable IDLE */ + usb->saved_msk &= ~USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, + usb->saved_msk); + } else { + fhci_dbg_isr(fhci, -1); + } + + usb_er &= ~USB_E_IDLE_MASK; + } + + spin_unlock_irqrestore(&fhci->lock, flags); + + return IRQ_HANDLED; +} + + +/* + * Process normal completions(error or sucess) and clean the schedule. + * + * This is the main path for handing urbs back to drivers. The only other patth + * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning + * the (re-reversed) done list as this does. + */ +static void process_done_list(unsigned long data) +{ + struct urb *urb; + struct ed *ed; + struct td *td; + struct urb_priv *urb_priv; + struct fhci_hcd *fhci = (struct fhci_hcd *)data; + + disable_irq(fhci->timer->irq); + disable_irq(fhci_to_hcd(fhci)->irq); + spin_lock(&fhci->lock); + + td = fhci_remove_td_from_done_list(fhci->hc_list); + while (td != NULL) { + urb = td->urb; + urb_priv = urb->hcpriv; + ed = td->ed; + + /* update URB's length and status from TD */ + fhci_done_td(urb, td); + urb_priv->tds_cnt++; + + /* + * if all this urb's TDs are done, call complete() + * Interrupt transfers are the onley special case: + * they are reissued,until "deleted" by usb_unlink_urb + * (real work done in a SOF intr, by process_del_list) + */ + if (urb_priv->tds_cnt == urb_priv->num_of_tds) { + fhci_urb_complete_free(fhci, urb); + } else if (urb_priv->state == URB_DEL && + ed->state == FHCI_ED_SKIP) { + fhci_del_ed_list(fhci, ed); + ed->state = FHCI_ED_OPER; + } else if (ed->state == FHCI_ED_HALTED) { + urb_priv->state = URB_DEL; + ed->state = FHCI_ED_URB_DEL; + fhci_del_ed_list(fhci, ed); + ed->state = FHCI_ED_OPER; + } + + td = fhci_remove_td_from_done_list(fhci->hc_list); + } + + spin_unlock(&fhci->lock); + enable_irq(fhci->timer->irq); + enable_irq(fhci_to_hcd(fhci)->irq); +} + +DECLARE_TASKLET(fhci_tasklet, process_done_list, 0); + +/* transfer complted callback */ +u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci) +{ + if (!fhci->process_done_task->state) + tasklet_schedule(fhci->process_done_task); + return 0; +} + +/* + * adds urb to the endpoint descriptor list + * arguments: + * fhci data structure for the Low level host controller + * ep USB Host endpoint data structure + * urb USB request block data structure + */ +void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb) +{ + struct ed *ed = urb->ep->hcpriv; + struct urb_priv *urb_priv = urb->hcpriv; + u32 data_len = urb->transfer_buffer_length; + int urb_state = 0; + int toggle = 0; + struct td *td; + u8 *data; + u16 cnt = 0; + + if (ed == NULL) { + ed = fhci_get_empty_ed(fhci); + ed->dev_addr = usb_pipedevice(urb->pipe); + ed->ep_addr = usb_pipeendpoint(urb->pipe); + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + ed->mode = FHCI_TF_CTRL; + break; + case PIPE_BULK: + ed->mode = FHCI_TF_BULK; + break; + case PIPE_INTERRUPT: + ed->mode = FHCI_TF_INTR; + break; + case PIPE_ISOCHRONOUS: + ed->mode = FHCI_TF_ISO; + break; + default: + break; + } + ed->speed = (urb->dev->speed == USB_SPEED_LOW) ? + FHCI_LOW_SPEED : FHCI_FULL_SPEED; + ed->max_pkt_size = usb_maxpacket(urb->dev, + urb->pipe, usb_pipeout(urb->pipe)); + urb->ep->hcpriv = ed; + fhci_dbg(fhci, "new ep speed=%d max_pkt_size=%d\n", + ed->speed, ed->max_pkt_size); + } + + /* for ISO transfer calculate start frame index */ + if (ed->mode == FHCI_TF_ISO && urb->transfer_flags & URB_ISO_ASAP) + urb->start_frame = ed->td_head ? ed->last_iso + 1 : + get_frame_num(fhci); + + /* + * OHCI handles the DATA toggle itself,we just use the USB + * toggle bits + */ + if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe))) + toggle = USB_TD_TOGGLE_CARRY; + else { + toggle = USB_TD_TOGGLE_DATA0; + usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe), 1); + } + + urb_priv->tds_cnt = 0; + urb_priv->ed = ed; + if (data_len > 0) + data = urb->transfer_buffer; + else + data = NULL; + + switch (ed->mode) { + case FHCI_TF_BULK: + if (urb->transfer_flags & URB_ZERO_PACKET && + urb->transfer_buffer_length > 0 && + ((urb->transfer_buffer_length % + usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe))) == 0)) + urb_state = US_BULK0; + while (data_len > 4096) { + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + cnt ? USB_TD_TOGGLE_CARRY : + toggle, + data, 4096, 0, 0, true); + data += 4096; + data_len -= 4096; + cnt++; + } + + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN, + cnt ? USB_TD_TOGGLE_CARRY : toggle, + data, data_len, 0, 0, true); + cnt++; + + if (urb->transfer_flags & URB_ZERO_PACKET && + cnt < urb_priv->num_of_tds) { + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + USB_TD_TOGGLE_CARRY, NULL, 0, 0, 0, true); + cnt++; + } + break; + case FHCI_TF_INTR: + urb->start_frame = get_frame_num(fhci) + 1; + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN, + USB_TD_TOGGLE_DATA0, data, data_len, + urb->interval, urb->start_frame, true); + break; + case FHCI_TF_CTRL: + ed->dev_addr = usb_pipedevice(urb->pipe); + ed->max_pkt_size = usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe)); + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP, + USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true); + + if (data_len > 0) { + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + USB_TD_TOGGLE_DATA1, data, data_len, 0, 0, + true); + } + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + usb_pipeout(urb->pipe) ? FHCI_TA_IN : FHCI_TA_OUT, + USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true); + urb_state = US_CTRL_SETUP; + break; + case FHCI_TF_ISO: + for (cnt = 0; cnt < urb->number_of_packets; cnt++) { + u16 frame = urb->start_frame; + + /* + * FIXME scheduling should handle frame counter + * roll-around ... exotic case (and OHCI has + * a 2^16 iso range, vs other HCs max of 2^10) + */ + frame += cnt * urb->interval; + frame &= 0x07ff; + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + USB_TD_TOGGLE_DATA0, + data + urb->iso_frame_desc[cnt].offset, + urb->iso_frame_desc[cnt].length, + urb->interval, frame, true); + } + break; + default: + break; + } + + /* + * set the state of URB + * control pipe:3 states -- setup,data,status + * interrupt and bulk pipe:1 state -- data + */ + urb->pipe &= ~0x1f; + urb->pipe |= urb_state & 0x1f; + + urb_priv->state = URB_INPROGRESS; + + if (!ed->td_head) { + ed->state = FHCI_ED_OPER; + switch (ed->mode) { + case FHCI_TF_CTRL: + list_add(&ed->node, &fhci->hc_list->ctrl_list); + break; + case FHCI_TF_BULK: + list_add(&ed->node, &fhci->hc_list->bulk_list); + break; + case FHCI_TF_INTR: + list_add(&ed->node, &fhci->hc_list->intr_list); + break; + case FHCI_TF_ISO: + list_add(&ed->node, &fhci->hc_list->iso_list); + break; + default: + break; + } + } + + fhci_add_tds_to_ed(ed, urb_priv->tds, urb_priv->num_of_tds); + fhci->active_urbs++; +} diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c new file mode 100644 index 00000000000..b4033229031 --- /dev/null +++ b/drivers/usb/host/fhci-tds.c @@ -0,0 +1,626 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/io.h> +#include <linux/usb.h> +#include "../core/hcd.h" +#include "fhci.h" + +#define DUMMY_BD_BUFFER 0xdeadbeef +#define DUMMY2_BD_BUFFER 0xbaadf00d + +/* Transaction Descriptors bits */ +#define TD_R 0x8000 /* ready bit */ +#define TD_W 0x2000 /* wrap bit */ +#define TD_I 0x1000 /* interrupt on completion */ +#define TD_L 0x0800 /* last */ +#define TD_TC 0x0400 /* transmit CRC */ +#define TD_CNF 0x0200 /* CNF - Must be always 1 */ +#define TD_LSP 0x0100 /* Low-speed transaction */ +#define TD_PID 0x00c0 /* packet id */ +#define TD_RXER 0x0020 /* Rx error or not */ + +#define TD_NAK 0x0010 /* No ack. */ +#define TD_STAL 0x0008 /* Stall recieved */ +#define TD_TO 0x0004 /* time out */ +#define TD_UN 0x0002 /* underrun */ +#define TD_NO 0x0010 /* Rx Non Octet Aligned Packet */ +#define TD_AB 0x0008 /* Frame Aborted */ +#define TD_CR 0x0004 /* CRC Error */ +#define TD_OV 0x0002 /* Overrun */ +#define TD_BOV 0x0001 /* Buffer Overrun */ + +#define TD_ERRORS (TD_NAK | TD_STAL | TD_TO | TD_UN | \ + TD_NO | TD_AB | TD_CR | TD_OV | TD_BOV) + +#define TD_PID_DATA0 0x0080 /* Data 0 toggle */ +#define TD_PID_DATA1 0x00c0 /* Data 1 toggle */ +#define TD_PID_TOGGLE 0x00c0 /* Data 0/1 toggle mask */ + +#define TD_TOK_SETUP 0x0000 +#define TD_TOK_OUT 0x4000 +#define TD_TOK_IN 0x8000 +#define TD_ISO 0x1000 +#define TD_ENDP 0x0780 +#define TD_ADDR 0x007f + +#define TD_ENDP_SHIFT 7 + +struct usb_td { + __be16 status; + __be16 length; + __be32 buf_ptr; + __be16 extra; + __be16 reserved; +}; + +static struct usb_td __iomem *next_bd(struct usb_td __iomem *base, + struct usb_td __iomem *td, + u16 status) +{ + if (status & TD_W) + return base; + else + return ++td; +} + +void fhci_push_dummy_bd(struct endpoint *ep) +{ + if (ep->already_pushed_dummy_bd == false) { + u16 td_status = in_be16(&ep->empty_td->status); + + out_be32(&ep->empty_td->buf_ptr, DUMMY_BD_BUFFER); + /* get the next TD in the ring */ + ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status); + ep->already_pushed_dummy_bd = true; + } +} + +/* destroy an USB endpoint */ +void fhci_ep0_free(struct fhci_usb *usb) +{ + struct endpoint *ep; + int size; + + ep = usb->ep0; + if (ep) { + if (ep->td_base) + cpm_muram_free(cpm_muram_offset(ep->td_base)); + + if (ep->conf_frame_Q) { + size = cq_howmany(ep->conf_frame_Q); + for (; size; size--) { + struct packet *pkt = cq_get(ep->conf_frame_Q); + + kfree(pkt); + } + cq_delete(ep->conf_frame_Q); + } + + if (ep->empty_frame_Q) { + size = cq_howmany(ep->empty_frame_Q); + for (; size; size--) { + struct packet *pkt = cq_get(ep->empty_frame_Q); + + kfree(pkt); + } + cq_delete(ep->empty_frame_Q); + } + + if (ep->dummy_packets_Q) { + size = cq_howmany(ep->dummy_packets_Q); + for (; size; size--) { + u8 *buff = cq_get(ep->dummy_packets_Q); + + kfree(buff); + } + cq_delete(ep->dummy_packets_Q); + } + + kfree(ep); + usb->ep0 = NULL; + } +} + +/* + * create the endpoint structure + * + * arguments: + * usb A pointer to the data structure of the USB + * data_mem The data memory partition(BUS) + * ring_len TD ring length + */ +u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, + u32 ring_len) +{ + struct endpoint *ep; + struct usb_td __iomem *td; + unsigned long ep_offset; + char *err_for = "enpoint PRAM"; + int ep_mem_size; + u32 i; + + /* we need at least 3 TDs in the ring */ + if (!(ring_len > 2)) { + fhci_err(usb->fhci, "illegal TD ring length parameters\n"); + return -EINVAL; + } + + ep = kzalloc(sizeof(*ep), GFP_KERNEL); + if (!ep) + return -ENOMEM; + + ep_mem_size = ring_len * sizeof(*td) + sizeof(struct fhci_ep_pram); + ep_offset = cpm_muram_alloc(ep_mem_size, 32); + if (IS_ERR_VALUE(ep_offset)) + goto err; + ep->td_base = cpm_muram_addr(ep_offset); + + /* zero all queue pointers */ + ep->conf_frame_Q = cq_new(ring_len + 2); + ep->empty_frame_Q = cq_new(ring_len + 2); + ep->dummy_packets_Q = cq_new(ring_len + 2); + if (!ep->conf_frame_Q || !ep->empty_frame_Q || !ep->dummy_packets_Q) { + err_for = "frame_queues"; + goto err; + } + + for (i = 0; i < (ring_len + 1); i++) { + struct packet *pkt; + u8 *buff; + + pkt = kmalloc(sizeof(*pkt), GFP_KERNEL); + if (!pkt) { + err_for = "frame"; + goto err; + } + + buff = kmalloc(1028 * sizeof(*buff), GFP_KERNEL); + if (!buff) { + kfree(pkt); + err_for = "buffer"; + goto err; + } + cq_put(ep->empty_frame_Q, pkt); + cq_put(ep->dummy_packets_Q, buff); + } + + /* we put the endpoint parameter RAM right behind the TD ring */ + ep->ep_pram_ptr = (void __iomem *)ep->td_base + sizeof(*td) * ring_len; + + ep->conf_td = ep->td_base; + ep->empty_td = ep->td_base; + + ep->already_pushed_dummy_bd = false; + + /* initialize tds */ + td = ep->td_base; + for (i = 0; i < ring_len; i++) { + out_be32(&td->buf_ptr, 0); + out_be16(&td->status, 0); + out_be16(&td->length, 0); + out_be16(&td->extra, 0); + td++; + } + td--; + out_be16(&td->status, TD_W); /* for last TD set Wrap bit */ + out_be16(&td->length, 0); + + /* endpoint structure has been created */ + usb->ep0 = ep; + + return 0; +err: + fhci_ep0_free(usb); + kfree(ep); + fhci_err(usb->fhci, "no memory for the %s\n", err_for); + return -ENOMEM; +} + +/* + * initialize the endpoint register according to the given parameters + * + * artuments: + * usb A pointer to the data strucutre of the USB + * ep A pointer to the endpoint structre + * data_mem The data memory partition(BUS) + */ +void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep, + enum fhci_mem_alloc data_mem) +{ + u8 rt; + + /* set the endpoint registers according to the endpoint */ + out_be16(&usb->fhci->regs->usb_ep[0], + USB_TRANS_CTR | USB_EP_MF | USB_EP_RTE); + out_be16(&usb->fhci->pram->ep_ptr[0], + cpm_muram_offset(ep->ep_pram_ptr)); + + rt = (BUS_MODE_BO_BE | BUS_MODE_GBL); +#ifdef MULTI_DATA_BUS + if (data_mem == MEM_SECONDARY) + rt |= BUS_MODE_DTB; +#endif + out_8(&ep->ep_pram_ptr->rx_func_code, rt); + out_8(&ep->ep_pram_ptr->tx_func_code, rt); + out_be16(&ep->ep_pram_ptr->rx_buff_len, 1028); + out_be16(&ep->ep_pram_ptr->rx_base, 0); + out_be16(&ep->ep_pram_ptr->tx_base, cpm_muram_offset(ep->td_base)); + out_be16(&ep->ep_pram_ptr->rx_bd_ptr, 0); + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, cpm_muram_offset(ep->td_base)); + out_be32(&ep->ep_pram_ptr->tx_state, 0); +} + +/* + * Collect the submitted frames and inform the application about them + * It is also prepearing the TDs for new frames. If the Tx interrupts + * are diabled, the application should call that routine to get + * confirmation about the submitted frames. Otherwise, the routine is + * called frome the interrupt service routine during the Tx interrupt. + * In that case the application is informed by calling the application + * specific 'fhci_transaction_confirm' routine + */ +static void fhci_td_transaction_confirm(struct fhci_usb *usb) +{ + struct endpoint *ep = usb->ep0; + struct packet *pkt; + struct usb_td __iomem *td; + u16 extra_data; + u16 td_status; + u16 td_length; + u32 buf; + + /* + * collect transmitted BDs from the chip. The routine clears all BDs + * with R bit = 0 and the pointer to data buffer is not NULL, that is + * BDs which point to the transmitted data buffer + */ + while (1) { + td = ep->conf_td; + td_status = in_be16(&td->status); + td_length = in_be16(&td->length); + buf = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + + /* check if the TD is empty */ + if (!(!(td_status & TD_R) && ((td_status & ~TD_W) || buf))) + break; + /* check if it is a dummy buffer */ + else if ((buf == DUMMY_BD_BUFFER) && !(td_status & ~TD_W)) + break; + + /* mark TD as empty */ + clrbits16(&td->status, ~TD_W); + out_be16(&td->length, 0); + out_be32(&td->buf_ptr, 0); + out_be16(&td->extra, 0); + /* advance the TD pointer */ + ep->conf_td = next_bd(ep->td_base, ep->conf_td, td_status); + + /* check if it is a dummy buffer(type2) */ + if ((buf == DUMMY2_BD_BUFFER) && !(td_status & ~TD_W)) + continue; + + pkt = cq_get(ep->conf_frame_Q); + if (!pkt) + fhci_err(usb->fhci, "no frame to confirm\n"); + + if (td_status & TD_ERRORS) { + if (td_status & TD_RXER) { + if (td_status & TD_CR) + pkt->status = USB_TD_RX_ER_CRC; + else if (td_status & TD_AB) + pkt->status = USB_TD_RX_ER_BITSTUFF; + else if (td_status & TD_OV) + pkt->status = USB_TD_RX_ER_OVERUN; + else if (td_status & TD_BOV) + pkt->status = USB_TD_RX_DATA_OVERUN; + else if (td_status & TD_NO) + pkt->status = USB_TD_RX_ER_NONOCT; + else + fhci_err(usb->fhci, "illegal error " + "occured\n"); + } else if (td_status & TD_NAK) + pkt->status = USB_TD_TX_ER_NAK; + else if (td_status & TD_TO) + pkt->status = USB_TD_TX_ER_TIMEOUT; + else if (td_status & TD_UN) + pkt->status = USB_TD_TX_ER_UNDERUN; + else if (td_status & TD_STAL) + pkt->status = USB_TD_TX_ER_STALL; + else + fhci_err(usb->fhci, "illegal error occured\n"); + } else if ((extra_data & TD_TOK_IN) && + pkt->len > td_length - CRC_SIZE) { + pkt->status = USB_TD_RX_DATA_UNDERUN; + } + + if (extra_data & TD_TOK_IN) + pkt->len = td_length - CRC_SIZE; + else if (pkt->info & PKT_ZLP) + pkt->len = 0; + else + pkt->len = td_length; + + fhci_transaction_confirm(usb, pkt); + } +} + +/* + * Submitting a data frame to a specified endpoint of a USB device + * The frame is put in the driver's transmit queue for this endpoint + * + * Arguments: + * usb A pointer to the USB structure + * pkt A pointer to the user frame structure + * trans_type Transaction tyep - IN,OUT or SETUP + * dest_addr Device address - 0~127 + * dest_ep Endpoint number of the device - 0~16 + * trans_mode Pipe type - ISO,Interrupt,bulk or control + * dest_speed USB speed - Low speed or FULL speed + * data_toggle Data sequence toggle - 0 or 1 + */ +u32 fhci_host_transaction(struct fhci_usb *usb, + struct packet *pkt, + enum fhci_ta_type trans_type, + u8 dest_addr, + u8 dest_ep, + enum fhci_tf_mode trans_mode, + enum fhci_speed dest_speed, u8 data_toggle) +{ + struct endpoint *ep = usb->ep0; + struct usb_td __iomem *td; + u16 extra_data; + u16 td_status; + + fhci_usb_disable_interrupt(usb); + /* start from the next BD that should be filled */ + td = ep->empty_td; + td_status = in_be16(&td->status); + + if (td_status & TD_R && in_be16(&td->length)) { + /* if the TD is not free */ + fhci_usb_enable_interrupt(usb); + return -1; + } + + /* get the next TD in the ring */ + ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status); + fhci_usb_enable_interrupt(usb); + pkt->priv_data = td; + out_be32(&td->buf_ptr, virt_to_phys(pkt->data)); + /* sets up transaction parameters - addr,endp,dir,and type */ + extra_data = (dest_ep << TD_ENDP_SHIFT) | dest_addr; + switch (trans_type) { + case FHCI_TA_IN: + extra_data |= TD_TOK_IN; + break; + case FHCI_TA_OUT: + extra_data |= TD_TOK_OUT; + break; + case FHCI_TA_SETUP: + extra_data |= TD_TOK_SETUP; + break; + } + if (trans_mode == FHCI_TF_ISO) + extra_data |= TD_ISO; + out_be16(&td->extra, extra_data); + + /* sets up the buffer descriptor */ + td_status = ((td_status & TD_W) | TD_R | TD_L | TD_I | TD_CNF); + if (!(pkt->info & PKT_NO_CRC)) + td_status |= TD_TC; + + switch (trans_type) { + case FHCI_TA_IN: + if (data_toggle) + pkt->info |= PKT_PID_DATA1; + else + pkt->info |= PKT_PID_DATA0; + break; + default: + if (data_toggle) { + td_status |= TD_PID_DATA1; + pkt->info |= PKT_PID_DATA1; + } else { + td_status |= TD_PID_DATA0; + pkt->info |= PKT_PID_DATA0; + } + break; + } + + if ((dest_speed == FHCI_LOW_SPEED) && + (usb->port_status == FHCI_PORT_FULL)) + td_status |= TD_LSP; + + out_be16(&td->status, td_status); + + /* set up buffer length */ + if (trans_type == FHCI_TA_IN) + out_be16(&td->length, pkt->len + CRC_SIZE); + else + out_be16(&td->length, pkt->len); + + /* put the frame to the confirmation queue */ + cq_put(ep->conf_frame_Q, pkt); + + if (cq_howmany(ep->conf_frame_Q) == 1) + out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO); + + return 0; +} + +/* Reset the Tx BD ring */ +void fhci_flush_bds(struct fhci_usb *usb) +{ + u16 extra_data; + u16 td_status; + u32 buf; + struct usb_td __iomem *td; + struct endpoint *ep = usb->ep0; + + td = ep->td_base; + while (1) { + td_status = in_be16(&td->status); + buf = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + + /* if the TD is not empty - we'll confirm it as Timeout */ + if (td_status & TD_R) + out_be16(&td->status, (td_status & ~TD_R) | TD_TO); + /* if this TD is dummy - let's skip this TD */ + else if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) + out_be32(&td->buf_ptr, DUMMY2_BD_BUFFER); + /* if this is the last TD - break */ + if (td_status & TD_W) + break; + + td++; + } + + fhci_td_transaction_confirm(usb); + + td = ep->td_base; + do { + out_be16(&td->status, 0); + out_be16(&td->length, 0); + out_be32(&td->buf_ptr, 0); + out_be16(&td->extra, 0); + td++; + } while (!(in_be16(&td->status) & TD_W)); + out_be16(&td->status, TD_W); /* for last TD set Wrap bit */ + out_be16(&td->length, 0); + out_be32(&td->buf_ptr, 0); + out_be16(&td->extra, 0); + + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, + in_be16(&ep->ep_pram_ptr->tx_base)); + out_be32(&ep->ep_pram_ptr->tx_state, 0); + out_be16(&ep->ep_pram_ptr->tx_cnt, 0); + ep->empty_td = ep->td_base; + ep->conf_td = ep->td_base; +} + +/* + * Flush all transmitted packets from TDs in the actual frame. + * This routine is called when something wrong with the controller and + * we want to get rid of the actual frame and start again next frame + */ +void fhci_flush_actual_frame(struct fhci_usb *usb) +{ + u8 mode; + u16 tb_ptr; + u16 extra_data; + u16 td_status; + u32 buf_ptr; + struct usb_td __iomem *td; + struct endpoint *ep = usb->ep0; + + /* disable the USB controller */ + mode = in_8(&usb->fhci->regs->usb_mod); + out_8(&usb->fhci->regs->usb_mod, mode & ~USB_MODE_EN); + + tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr); + td = cpm_muram_addr(tb_ptr); + td_status = in_be16(&td->status); + buf_ptr = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + do { + if (td_status & TD_R) { + out_be16(&td->status, (td_status & ~TD_R) | TD_TO); + } else { + out_be32(&td->buf_ptr, 0); + ep->already_pushed_dummy_bd = false; + break; + } + + /* advance the TD pointer */ + td = next_bd(ep->td_base, td, td_status); + td_status = in_be16(&td->status); + buf_ptr = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + } while ((td_status & TD_R) || buf_ptr); + + fhci_td_transaction_confirm(usb); + + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, + in_be16(&ep->ep_pram_ptr->tx_base)); + out_be32(&ep->ep_pram_ptr->tx_state, 0); + out_be16(&ep->ep_pram_ptr->tx_cnt, 0); + ep->empty_td = ep->td_base; + ep->conf_td = ep->td_base; + + usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION; + + /* reset the event register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + /* enable the USB controller */ + out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN); +} + +/* handles Tx confirm and Tx error interrupt */ +void fhci_tx_conf_interrupt(struct fhci_usb *usb) +{ + fhci_td_transaction_confirm(usb); + + /* + * Schedule another transaction to this frame only if we have + * already confirmed all transaction in the frame. + */ + if (((fhci_get_sof_timer_count(usb) < usb->max_frame_usage) || + (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)) && + (list_empty(&usb->actual_frame->tds_list))) + fhci_schedule_transactions(usb); +} + +void fhci_host_transmit_actual_frame(struct fhci_usb *usb) +{ + u16 tb_ptr; + u16 td_status; + struct usb_td __iomem *td; + struct endpoint *ep = usb->ep0; + + tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr); + td = cpm_muram_addr(tb_ptr); + + if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) { + struct usb_td __iomem *old_td = td; + + ep->already_pushed_dummy_bd = false; + td_status = in_be16(&td->status); + /* gets the next TD in the ring */ + td = next_bd(ep->td_base, td, td_status); + tb_ptr = cpm_muram_offset(td); + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, tb_ptr); + + /* start transmit only if we have something in the TDs */ + if (in_be16(&td->status) & TD_R) + out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO); + + if (in_be32(&ep->conf_td->buf_ptr) == DUMMY_BD_BUFFER) { + out_be32(&old_td->buf_ptr, 0); + ep->conf_td = next_bd(ep->td_base, ep->conf_td, + td_status); + } else { + out_be32(&old_td->buf_ptr, DUMMY2_BD_BUFFER); + } + } +} diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h new file mode 100644 index 00000000000..7116284ed21 --- /dev/null +++ b/drivers/usb/host/fhci.h @@ -0,0 +1,607 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __FHCI_H +#define __FHCI_H + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/kfifo.h> +#include <linux/io.h> +#include <linux/usb.h> +#include <asm/qe.h> +#include "../core/hcd.h" + +#define USB_CLOCK 48000000 + +#define FHCI_PRAM_SIZE 0x100 + +#define MAX_EDS 32 +#define MAX_TDS 32 + + +/* CRC16 field size */ +#define CRC_SIZE 2 + +/* USB protocol overhead for each frame transmitted from the host */ +#define PROTOCOL_OVERHEAD 7 + +/* Packet structure, info field */ +#define PKT_PID_DATA0 0x80000000 /* PID - Data toggle zero */ +#define PKT_PID_DATA1 0x40000000 /* PID - Data toggle one */ +#define PKT_PID_SETUP 0x20000000 /* PID - Setup bit */ +#define PKT_SETUP_STATUS 0x10000000 /* Setup status bit */ +#define PKT_SETADDR_STATUS 0x08000000 /* Set address status bit */ +#define PKT_SET_HOST_LAST 0x04000000 /* Last data packet */ +#define PKT_HOST_DATA 0x02000000 /* Data packet */ +#define PKT_FIRST_IN_FRAME 0x01000000 /* First packet in the frame */ +#define PKT_TOKEN_FRAME 0x00800000 /* Token packet */ +#define PKT_ZLP 0x00400000 /* Zero length packet */ +#define PKT_IN_TOKEN_FRAME 0x00200000 /* IN token packet */ +#define PKT_OUT_TOKEN_FRAME 0x00100000 /* OUT token packet */ +#define PKT_SETUP_TOKEN_FRAME 0x00080000 /* SETUP token packet */ +#define PKT_STALL_FRAME 0x00040000 /* STALL packet */ +#define PKT_NACK_FRAME 0x00020000 /* NACK packet */ +#define PKT_NO_PID 0x00010000 /* No PID */ +#define PKT_NO_CRC 0x00008000 /* don't append CRC */ +#define PKT_HOST_COMMAND 0x00004000 /* Host command packet */ +#define PKT_DUMMY_PACKET 0x00002000 /* Dummy packet, used for mmm */ +#define PKT_LOW_SPEED_PACKET 0x00001000 /* Low-Speed packet */ + +#define TRANS_OK (0) +#define TRANS_INPROGRESS (-1) +#define TRANS_DISCARD (-2) +#define TRANS_FAIL (-3) + +#define PS_INT 0 +#define PS_DISCONNECTED 1 +#define PS_CONNECTED 2 +#define PS_READY 3 +#define PS_MISSING 4 + +/* Transfer Descriptor status field */ +#define USB_TD_OK 0x00000000 /* TD transmited or received ok */ +#define USB_TD_INPROGRESS 0x80000000 /* TD is being transmitted */ +#define USB_TD_RX_ER_NONOCT 0x40000000 /* Tx Non Octet Aligned Packet */ +#define USB_TD_RX_ER_BITSTUFF 0x20000000 /* Frame Aborted-Received pkt */ +#define USB_TD_RX_ER_CRC 0x10000000 /* CRC error */ +#define USB_TD_RX_ER_OVERUN 0x08000000 /* Over - run occured */ +#define USB_TD_RX_ER_PID 0x04000000 /* wrong PID received */ +#define USB_TD_RX_DATA_UNDERUN 0x02000000 /* shorter than expected */ +#define USB_TD_RX_DATA_OVERUN 0x01000000 /* longer than expected */ +#define USB_TD_TX_ER_NAK 0x00800000 /* NAK handshake */ +#define USB_TD_TX_ER_STALL 0x00400000 /* STALL handshake */ +#define USB_TD_TX_ER_TIMEOUT 0x00200000 /* transmit time out */ +#define USB_TD_TX_ER_UNDERUN 0x00100000 /* transmit underrun */ + +#define USB_TD_ERROR (USB_TD_RX_ER_NONOCT | USB_TD_RX_ER_BITSTUFF | \ + USB_TD_RX_ER_CRC | USB_TD_RX_ER_OVERUN | USB_TD_RX_ER_PID | \ + USB_TD_RX_DATA_UNDERUN | USB_TD_RX_DATA_OVERUN | \ + USB_TD_TX_ER_NAK | USB_TD_TX_ER_STALL | \ + USB_TD_TX_ER_TIMEOUT | USB_TD_TX_ER_UNDERUN) + +/* Transfer Descriptor toggle field */ +#define USB_TD_TOGGLE_DATA0 0 +#define USB_TD_TOGGLE_DATA1 1 +#define USB_TD_TOGGLE_CARRY 2 + +/* #define MULTI_DATA_BUS */ + +/* Bus mode register RBMR/TBMR */ +#define BUS_MODE_GBL 0x20 /* Global snooping */ +#define BUS_MODE_BO 0x18 /* Byte ordering */ +#define BUS_MODE_BO_BE 0x10 /* Byte ordering - Big-endian */ +#define BUS_MODE_DTB 0x02 /* Data bus */ + +/* FHCI QE USB Register Description */ + +/* USB Mode Register bit define */ +#define USB_MODE_EN 0x01 +#define USB_MODE_HOST 0x02 +#define USB_MODE_TEST 0x04 +#define USB_MODE_SFTE 0x08 +#define USB_MODE_RESUME 0x40 +#define USB_MODE_LSS 0x80 + +/* USB Slave Address Register Mask */ +#define USB_SLVADDR_MASK 0x7F + +/* USB Endpoint register define */ +#define USB_EPNUM_MASK 0xF000 +#define USB_EPNUM_SHIFT 12 + +#define USB_TRANS_MODE_SHIFT 8 +#define USB_TRANS_CTR 0x0000 +#define USB_TRANS_INT 0x0100 +#define USB_TRANS_BULK 0x0200 +#define USB_TRANS_ISO 0x0300 + +#define USB_EP_MF 0x0020 +#define USB_EP_RTE 0x0010 + +#define USB_THS_SHIFT 2 +#define USB_THS_MASK 0x000c +#define USB_THS_NORMAL 0x0 +#define USB_THS_IGNORE_IN 0x0004 +#define USB_THS_NACK 0x0008 +#define USB_THS_STALL 0x000c + +#define USB_RHS_SHIFT 0 +#define USB_RHS_MASK 0x0003 +#define USB_RHS_NORMAL 0x0 +#define USB_RHS_IGNORE_OUT 0x0001 +#define USB_RHS_NACK 0x0002 +#define USB_RHS_STALL 0x0003 + +#define USB_RTHS_MASK 0x000f + +/* USB Command Register define */ +#define USB_CMD_STR_FIFO 0x80 +#define USB_CMD_FLUSH_FIFO 0x40 +#define USB_CMD_ISFT 0x20 +#define USB_CMD_DSFT 0x10 +#define USB_CMD_EP_MASK 0x03 + +/* USB Event and Mask Register define */ +#define USB_E_MSF_MASK 0x0800 +#define USB_E_SFT_MASK 0x0400 +#define USB_E_RESET_MASK 0x0200 +#define USB_E_IDLE_MASK 0x0100 +#define USB_E_TXE4_MASK 0x0080 +#define USB_E_TXE3_MASK 0x0040 +#define USB_E_TXE2_MASK 0x0020 +#define USB_E_TXE1_MASK 0x0010 +#define USB_E_SOF_MASK 0x0008 +#define USB_E_BSY_MASK 0x0004 +#define USB_E_TXB_MASK 0x0002 +#define USB_E_RXB_MASK 0x0001 + +/* Freescale USB Host controller registers */ +struct fhci_regs { + u8 usb_mod; /* mode register */ + u8 usb_addr; /* address register */ + u8 usb_comm; /* command register */ + u8 reserved1[1]; + __be16 usb_ep[4]; /* endpoint register */ + u8 reserved2[4]; + __be16 usb_event; /* event register */ + u8 reserved3[2]; + __be16 usb_mask; /* mask register */ + u8 reserved4[1]; + u8 usb_status; /* status register */ + __be16 usb_sof_tmr; /* Start Of Frame timer */ + u8 reserved5[2]; + __be16 usb_frame_num; /* frame number register */ + u8 reserved6[1]; +}; + +/* Freescale USB HOST */ +struct fhci_pram { + __be16 ep_ptr[4]; /* Endpoint porter reg */ + __be32 rx_state; /* Rx internal state */ + __be32 rx_ptr; /* Rx internal data pointer */ + __be16 frame_num; /* Frame number */ + __be16 rx_cnt; /* Rx byte count */ + __be32 rx_temp; /* Rx temp */ + __be32 rx_data_temp; /* Rx data temp */ + __be16 rx_u_ptr; /* Rx microcode return address temp */ + u8 reserved1[2]; /* reserved area */ + __be32 sof_tbl; /* SOF lookup table pointer */ + u8 sof_u_crc_temp; /* SOF micorcode CRC5 temp reg */ + u8 reserved2[0xdb]; +}; + +/* Freescale USB Endpoint*/ +struct fhci_ep_pram { + __be16 rx_base; /* Rx BD base address */ + __be16 tx_base; /* Tx BD base address */ + u8 rx_func_code; /* Rx function code */ + u8 tx_func_code; /* Tx function code */ + __be16 rx_buff_len; /* Rx buffer length */ + __be16 rx_bd_ptr; /* Rx BD pointer */ + __be16 tx_bd_ptr; /* Tx BD pointer */ + __be32 tx_state; /* Tx internal state */ + __be32 tx_ptr; /* Tx internal data pointer */ + __be16 tx_crc; /* temp transmit CRC */ + __be16 tx_cnt; /* Tx byte count */ + __be32 tx_temp; /* Tx temp */ + __be16 tx_u_ptr; /* Tx microcode return address temp */ + __be16 reserved; +}; + +struct fhci_controller_list { + struct list_head ctrl_list; /* control endpoints */ + struct list_head bulk_list; /* bulk endpoints */ + struct list_head iso_list; /* isochronous endpoints */ + struct list_head intr_list; /* interruput endpoints */ + struct list_head done_list; /* done transfers */ +}; + +struct virtual_root_hub { + int dev_num; /* USB address of the root hub */ + u32 feature; /* indicates what feature has been set */ + struct usb_hub_status hub; + struct usb_port_status port; +}; + +enum fhci_gpios { + GPIO_USBOE = 0, + GPIO_USBTP, + GPIO_USBTN, + GPIO_USBRP, + GPIO_USBRN, + /* these are optional */ + GPIO_SPEED, + GPIO_POWER, + NUM_GPIOS, +}; + +enum fhci_pins { + PIN_USBOE = 0, + PIN_USBTP, + PIN_USBTN, + NUM_PINS, +}; + +struct fhci_hcd { + enum qe_clock fullspeed_clk; + enum qe_clock lowspeed_clk; + struct qe_pin *pins[NUM_PINS]; + int gpios[NUM_GPIOS]; + bool alow_gpios[NUM_GPIOS]; + + struct fhci_regs __iomem *regs; /* I/O memory used to communicate */ + struct fhci_pram __iomem *pram; /* Parameter RAM */ + struct gtm_timer *timer; + + spinlock_t lock; + struct fhci_usb *usb_lld; /* Low-level driver */ + struct virtual_root_hub *vroot_hub; /* the virtual root hub */ + int active_urbs; + struct fhci_controller_list *hc_list; + struct tasklet_struct *process_done_task; /* tasklet for done list */ + + struct list_head empty_eds; + struct list_head empty_tds; + +#ifdef CONFIG_FHCI_DEBUG + int usb_irq_stat[13]; + struct dentry *dfs_root; + struct dentry *dfs_regs; + struct dentry *dfs_irq_stat; +#endif +}; + +#define USB_FRAME_USAGE 90 +#define FRAME_TIME_USAGE (USB_FRAME_USAGE*10) /* frame time usage */ +#define SW_FIX_TIME_BETWEEN_TRANSACTION 150 /* SW */ +#define MAX_BYTES_PER_FRAME (USB_FRAME_USAGE*15) +#define MAX_PERIODIC_FRAME_USAGE 90 + +/* transaction type */ +enum fhci_ta_type { + FHCI_TA_IN = 0, /* input transaction */ + FHCI_TA_OUT, /* output transaction */ + FHCI_TA_SETUP, /* setup transaction */ +}; + +/* transfer mode */ +enum fhci_tf_mode { + FHCI_TF_CTRL = 0, + FHCI_TF_ISO, + FHCI_TF_BULK, + FHCI_TF_INTR, +}; + +enum fhci_speed { + FHCI_FULL_SPEED, + FHCI_LOW_SPEED, +}; + +/* endpoint state */ +enum fhci_ed_state { + FHCI_ED_NEW = 0, /* pipe is new */ + FHCI_ED_OPER, /* pipe is operating */ + FHCI_ED_URB_DEL, /* pipe is in hold because urb is being deleted */ + FHCI_ED_SKIP, /* skip this pipe */ + FHCI_ED_HALTED, /* pipe is halted */ +}; + +enum fhci_port_status { + FHCI_PORT_POWER_OFF = 0, + FHCI_PORT_DISABLED, + FHCI_PORT_DISCONNECTING, + FHCI_PORT_WAITING, /* waiting for connection */ + FHCI_PORT_FULL, /* full speed connected */ + FHCI_PORT_LOW, /* low speed connected */ +}; + +enum fhci_mem_alloc { + MEM_CACHABLE_SYS = 0x00000001, /* primary DDR,cachable */ + MEM_NOCACHE_SYS = 0x00000004, /* primary DDR,non-cachable */ + MEM_SECONDARY = 0x00000002, /* either secondary DDR or SDRAM */ + MEM_PRAM = 0x00000008, /* multi-user RAM identifier */ +}; + +/* USB default parameters*/ +#define DEFAULT_RING_LEN 8 +#define DEFAULT_DATA_MEM MEM_CACHABLE_SYS + +struct ed { + u8 dev_addr; /* device address */ + u8 ep_addr; /* endpoint address */ + enum fhci_tf_mode mode; /* USB transfer mode */ + enum fhci_speed speed; + unsigned int max_pkt_size; + enum fhci_ed_state state; + struct list_head td_list; /* a list of all queued TD to this pipe */ + struct list_head node; + + /* read only parameters, should be cleared upon initialization */ + u8 toggle_carry; /* toggle carry from the last TD submitted */ + u32 last_iso; /* time stamp of last queued ISO transfer */ + struct td *td_head; /* a pointer to the current TD handled */ +}; + +struct td { + void *data; /* a pointer to the data buffer */ + unsigned int len; /* length of the data to be submitted */ + unsigned int actual_len; /* actual bytes transfered on this td */ + enum fhci_ta_type type; /* transaction type */ + u8 toggle; /* toggle for next trans. within this TD */ + u16 iso_index; /* ISO transaction index */ + u16 start_frame; /* start frame time stamp */ + u16 interval; /* interval between trans. (for ISO/Intr) */ + u32 status; /* status of the TD */ + struct ed *ed; /* a handle to the corresponding ED */ + struct urb *urb; /* a handle to the corresponding URB */ + bool ioc; /* Inform On Completion */ + struct list_head node; + + /* read only parameters should be cleared upon initialization */ + struct packet *pkt; + int nak_cnt; + int error_cnt; + struct list_head frame_lh; +}; + +struct packet { + u8 *data; /* packet data */ + u32 len; /* packet length */ + u32 status; /* status of the packet - equivalent to the status + * field for the corresponding structure td */ + u32 info; /* packet information */ + void __iomem *priv_data; /* private data of the driver (TDs or BDs) */ +}; + +/* struct for each URB */ +#define URB_INPROGRESS 0 +#define URB_DEL 1 + +/* URB states (state field) */ +#define US_BULK 0 +#define US_BULK0 1 + +/* three setup states */ +#define US_CTRL_SETUP 2 +#define US_CTRL_DATA 1 +#define US_CTRL_ACK 0 + +#define EP_ZERO 0 + +struct urb_priv { + int num_of_tds; + int tds_cnt; + int state; + + struct td **tds; + struct ed *ed; + struct timer_list time_out; +}; + +struct endpoint { + /* Pointer to ep parameter RAM */ + struct fhci_ep_pram __iomem *ep_pram_ptr; + + /* Host transactions */ + struct usb_td __iomem *td_base; /* first TD in the ring */ + struct usb_td __iomem *conf_td; /* next TD for confirm after transac */ + struct usb_td __iomem *empty_td;/* next TD for new transaction req. */ + struct kfifo *empty_frame_Q; /* Empty frames list to use */ + struct kfifo *conf_frame_Q; /* frames passed to TDs,waiting for tx */ + struct kfifo *dummy_packets_Q;/* dummy packets for the CRC overun */ + + bool already_pushed_dummy_bd; +}; + +/* struct for each 1mSec frame time */ +#define FRAME_IS_TRANSMITTED 0x00 +#define FRAME_TIMER_END_TRANSMISSION 0x01 +#define FRAME_DATA_END_TRANSMISSION 0x02 +#define FRAME_END_TRANSMISSION 0x03 +#define FRAME_IS_PREPARED 0x04 + +struct fhci_time_frame { + u16 frame_num; /* frame number */ + u16 total_bytes; /* total bytes submitted within this frame */ + u8 frame_status; /* flag that indicates to stop fill this frame */ + struct list_head tds_list; /* all tds of this frame */ +}; + +/* internal driver structure*/ +struct fhci_usb { + u16 saved_msk; /* saving of the USB mask register */ + struct endpoint *ep0; /* pointer for endpoint0 structure */ + int intr_nesting_cnt; /* interrupt nesting counter */ + u16 max_frame_usage; /* max frame time usage,in micro-sec */ + u16 max_bytes_per_frame; /* max byte can be tx in one time frame */ + u32 sw_transaction_time; /* sw complete trans time,in micro-sec */ + struct fhci_time_frame *actual_frame; + struct fhci_controller_list *hc_list; /* main structure for hc */ + struct virtual_root_hub *vroot_hub; + enum fhci_port_status port_status; /* v_rh port status */ + + u32 (*transfer_confirm)(struct fhci_hcd *fhci); + + struct fhci_hcd *fhci; +}; + +/* + * Various helpers and prototypes below. + */ + +static inline u16 get_frame_num(struct fhci_hcd *fhci) +{ + return in_be16(&fhci->pram->frame_num) & 0x07ff; +} + +#define fhci_dbg(fhci, fmt, args...) \ + dev_dbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_vdbg(fhci, fmt, args...) \ + dev_vdbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_err(fhci, fmt, args...) \ + dev_err(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_info(fhci, fmt, args...) \ + dev_info(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_warn(fhci, fmt, args...) \ + dev_warn(fhci_to_hcd(fhci)->self.controller, fmt, ##args) + +static inline struct fhci_hcd *hcd_to_fhci(struct usb_hcd *hcd) +{ + return (struct fhci_hcd *)hcd->hcd_priv; +} + +static inline struct usb_hcd *fhci_to_hcd(struct fhci_hcd *fhci) +{ + return container_of((void *)fhci, struct usb_hcd, hcd_priv); +} + +/* fifo of pointers */ +static inline struct kfifo *cq_new(int size) +{ + return kfifo_alloc(size * sizeof(void *), GFP_KERNEL, NULL); +} + +static inline void cq_delete(struct kfifo *kfifo) +{ + kfifo_free(kfifo); +} + +static inline unsigned int cq_howmany(struct kfifo *kfifo) +{ + return __kfifo_len(kfifo) / sizeof(void *); +} + +static inline int cq_put(struct kfifo *kfifo, void *p) +{ + return __kfifo_put(kfifo, (void *)&p, sizeof(p)); +} + +static inline void *cq_get(struct kfifo *kfifo) +{ + void *p = NULL; + + __kfifo_get(kfifo, (void *)&p, sizeof(p)); + return p; +} + +/* fhci-hcd.c */ +void fhci_start_sof_timer(struct fhci_hcd *fhci); +void fhci_stop_sof_timer(struct fhci_hcd *fhci); +u16 fhci_get_sof_timer_count(struct fhci_usb *usb); +void fhci_usb_enable_interrupt(struct fhci_usb *usb); +void fhci_usb_disable_interrupt(struct fhci_usb *usb); +int fhci_ioports_check_bus_state(struct fhci_hcd *fhci); + +/* fhci-mem.c */ +void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td); +void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed); +struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci); +struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb, + struct urb_priv *urb_priv, struct ed *ed, u16 index, + enum fhci_ta_type type, int toggle, u8 *data, u32 len, + u16 interval, u16 start_frame, bool ioc); +void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number); + +/* fhci-hub.c */ +void fhci_config_transceiver(struct fhci_hcd *fhci, + enum fhci_port_status status); +void fhci_port_disable(struct fhci_hcd *fhci); +void fhci_port_enable(void *lld); +void fhci_io_port_generate_reset(struct fhci_hcd *fhci); +void fhci_port_reset(void *lld); +int fhci_hub_status_data(struct usb_hcd *hcd, char *buf); +int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength); + +/* fhci-tds.c */ +void fhci_flush_bds(struct fhci_usb *usb); +void fhci_flush_actual_frame(struct fhci_usb *usb); +u32 fhci_host_transaction(struct fhci_usb *usb, struct packet *pkt, + enum fhci_ta_type trans_type, u8 dest_addr, + u8 dest_ep, enum fhci_tf_mode trans_mode, + enum fhci_speed dest_speed, u8 data_toggle); +void fhci_host_transmit_actual_frame(struct fhci_usb *usb); +void fhci_tx_conf_interrupt(struct fhci_usb *usb); +void fhci_push_dummy_bd(struct endpoint *ep); +u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, + u32 ring_len); +void fhci_init_ep_registers(struct fhci_usb *usb, + struct endpoint *ep, + enum fhci_mem_alloc data_mem); +void fhci_ep0_free(struct fhci_usb *usb); + +/* fhci-sched.c */ +extern struct tasklet_struct fhci_tasklet; +void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt); +void fhci_flush_all_transmissions(struct fhci_usb *usb); +void fhci_schedule_transactions(struct fhci_usb *usb); +void fhci_device_connected_interrupt(struct fhci_hcd *fhci); +void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci); +void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb); +u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci); +irqreturn_t fhci_irq(struct usb_hcd *hcd); +irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd); + +/* fhci-q.h */ +void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb); +struct td *fhci_remove_td_from_ed(struct ed *ed); +struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame); +void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed); +struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame); +void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td); +struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list); +void fhci_done_td(struct urb *urb, struct td *td); +void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed); + +#ifdef CONFIG_FHCI_DEBUG + +void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er); +void fhci_dfs_destroy(struct fhci_hcd *fhci); +void fhci_dfs_create(struct fhci_hcd *fhci); + +#else + +static inline void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) {} +static inline void fhci_dfs_destroy(struct fhci_hcd *fhci) {} +static inline void fhci_dfs_create(struct fhci_hcd *fhci) {} + +#endif /* CONFIG_FHCI_DEBUG */ + +#endif /* __FHCI_H */ diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 65a9609f4ad..5cf5f1eca4f 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -593,12 +593,10 @@ static int ohci_run (struct ohci_hcd *ohci) * to be checked in case boot firmware (BIOS/SMM/...) has set up * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM). * If the bus glue detected wakeup capability then it should - * already be enabled. Either way, if wakeup should be enabled - * but isn't, we'll enable it now. + * already be enabled; if so we'll just enable it again. */ - if ((ohci->hc_control & OHCI_CTRL_RWC) != 0 - && !device_can_wakeup(hcd->self.controller)) - device_init_wakeup(hcd->self.controller, 1); + if ((ohci->hc_control & OHCI_CTRL_RWC) != 0) + device_set_wakeup_capable(hcd->self.controller, 1); switch (ohci->hc_control & OHCI_CTRL_HCFS) { case OHCI_USB_OPER: diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 4bbddb73abd..f3aaba35e91 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -315,14 +315,14 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver, return -ENODEV; } - usb_host_ck = clk_get(0, "usb_hhc_ck"); + usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck"); if (IS_ERR(usb_host_ck)) return PTR_ERR(usb_host_ck); if (!cpu_is_omap15xx()) - usb_dc_ck = clk_get(0, "usb_dc_ck"); + usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck"); else - usb_dc_ck = clk_get(0, "lb_ck"); + usb_dc_ck = clk_get(&pdev->dev, "lb_ck"); if (IS_ERR(usb_dc_ck)) { clk_put(usb_host_ck); diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 8b28ae7865b..5d625c3fd42 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .suspend_late = usb_hcd_pci_suspend_late, .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 4e221060f58..944f7e0ca4d 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .suspend_late = usb_hcd_pci_suspend_late, .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif /* PM */ diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 189a9db0350..ad4fb15b5dc 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -57,7 +57,6 @@ #define USB_DEVICE_ID_LD_MACHINETEST 0x2040 /* USB Product ID of Machine Test System */ #define USB_VENDOR_ID_VERNIER 0x08f7 -#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001 #define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002 #define USB_DEVICE_ID_VERNIER_SKIP 0x0003 #define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 @@ -85,7 +84,6 @@ static struct usb_device_id ld_usb_table [] = { { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) }, - { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) }, diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index e06810aef2d..4cf27c72423 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -37,6 +37,7 @@ #define MON_IOCX_GET _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get) #define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch) #define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8) + #ifdef CONFIG_COMPAT #define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32) #define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32) @@ -921,21 +922,6 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, } break; -#ifdef CONFIG_COMPAT - case MON_IOCX_GET32: { - struct mon_bin_get32 getb; - - if (copy_from_user(&getb, (void __user *)arg, - sizeof(struct mon_bin_get32))) - return -EFAULT; - - ret = mon_bin_get_event(file, rp, - compat_ptr(getb.hdr32), compat_ptr(getb.data32), - getb.alloc32); - } - break; -#endif - case MON_IOCX_MFETCH: { struct mon_bin_mfetch mfetch; @@ -962,7 +948,57 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, } break; + case MON_IOCG_STATS: { + struct mon_bin_stats __user *sp; + unsigned int nevents; + unsigned int ndropped; + + spin_lock_irqsave(&rp->b_lock, flags); + ndropped = rp->cnt_lost; + rp->cnt_lost = 0; + spin_unlock_irqrestore(&rp->b_lock, flags); + nevents = mon_bin_queued(rp); + + sp = (struct mon_bin_stats __user *)arg; + if (put_user(rp->cnt_lost, &sp->dropped)) + return -EFAULT; + if (put_user(nevents, &sp->queued)) + return -EFAULT; + + } + break; + + default: + return -ENOTTY; + } + + return ret; +} + #ifdef CONFIG_COMPAT +static long mon_bin_compat_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct mon_reader_bin *rp = file->private_data; + int ret; + + switch (cmd) { + + case MON_IOCX_GET32: { + struct mon_bin_get32 getb; + + if (copy_from_user(&getb, (void __user *)arg, + sizeof(struct mon_bin_get32))) + return -EFAULT; + + ret = mon_bin_get_event(file, rp, + compat_ptr(getb.hdr32), compat_ptr(getb.data32), + getb.alloc32); + if (ret < 0) + return ret; + } + return 0; + case MON_IOCX_MFETCH32: { struct mon_bin_mfetch32 mfetch; @@ -986,37 +1022,25 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, return ret; if (put_user(ret, &uptr->nfetch32)) return -EFAULT; - ret = 0; } - break; -#endif - - case MON_IOCG_STATS: { - struct mon_bin_stats __user *sp; - unsigned int nevents; - unsigned int ndropped; - - spin_lock_irqsave(&rp->b_lock, flags); - ndropped = rp->cnt_lost; - rp->cnt_lost = 0; - spin_unlock_irqrestore(&rp->b_lock, flags); - nevents = mon_bin_queued(rp); + return 0; - sp = (struct mon_bin_stats __user *)arg; - if (put_user(rp->cnt_lost, &sp->dropped)) - return -EFAULT; - if (put_user(nevents, &sp->queued)) - return -EFAULT; + case MON_IOCG_STATS: + return mon_bin_ioctl(NULL, file, cmd, + (unsigned long) compat_ptr(arg)); - } - break; + case MON_IOCQ_URB_LEN: + case MON_IOCQ_RING_SIZE: + case MON_IOCT_RING_SIZE: + case MON_IOCH_MFLUSH: + return mon_bin_ioctl(NULL, file, cmd, arg); default: - return -ENOTTY; + ; } - - return ret; + return -ENOTTY; } +#endif /* CONFIG_COMPAT */ static unsigned int mon_bin_poll(struct file *file, struct poll_table_struct *wait) @@ -1094,6 +1118,9 @@ static const struct file_operations mon_fops_binary = { /* .write = mon_text_write, */ .poll = mon_bin_poll, .ioctl = mon_bin_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = mon_bin_compat_ioctl, +#endif .release = mon_bin_release, .mmap = mon_bin_mmap, }; diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 5af7379cd9a..9985db08e7d 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -11,6 +11,7 @@ config USB_MUSB_HDRC depends on (USB || USB_GADGET) && HAVE_CLK depends on !SUPERH select TWL4030_USB if MACH_OMAP_3430SDP + select USB_OTG_UTILS tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' help Say Y here if your system has a dual role high speed USB @@ -49,7 +50,7 @@ comment "OMAP 343x high speed USB support" depends on USB_MUSB_HDRC && ARCH_OMAP34XX comment "Blackfin high speed USB Support" - depends on USB_MUSB_HDRC && (BF54x && !BF544) || (BF52x && !BF522 && !BF523) + depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523)) config USB_TUSB6010 boolean "TUSB 6010 support" diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 5ad6d0893cb..569ef0fed0f 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -9,6 +9,7 @@ #include <linux/usb.h> #include "musb_core.h" +#include "musb_debug.h" #include "cppi_dma.h" @@ -423,6 +424,7 @@ cppi_rndis_update(struct cppi_channel *c, int is_rx, } } +#ifdef CONFIG_USB_MUSB_DEBUG static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd) { pr_debug("RXBD/%s %08x: " @@ -431,10 +433,11 @@ static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd) bd->hw_next, bd->hw_bufp, bd->hw_off_len, bd->hw_options); } +#endif static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx) { -#if MUSB_DEBUG > 0 +#ifdef CONFIG_USB_MUSB_DEBUG struct cppi_descriptor *bd; if (!_dbg_level(level)) @@ -881,12 +884,14 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket) bd->hw_options |= CPPI_SOP_SET; tail->hw_options |= CPPI_EOP_SET; - if (debug >= 5) { +#ifdef CONFIG_USB_MUSB_DEBUG + if (_dbg_level(5)) { struct cppi_descriptor *d; for (d = rx->head; d; d = d->next) cppi_dump_rxbd("S", d); } +#endif /* in case the preceding transfer left some state... */ tail = rx->last_processed; @@ -990,6 +995,7 @@ static int cppi_channel_program(struct dma_channel *ch, cppi_ch->offset = 0; cppi_ch->maxpacket = maxpacket; cppi_ch->buf_len = len; + cppi_ch->channel.actual_len = 0; /* TX channel? or RX? */ if (cppi_ch->transmit) diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 0d566dc5ce0..5a8fd5d57a1 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -32,9 +32,10 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/arch/hardware.h> -#include <mach/arch/memory.h> -#include <mach/arch/gpio.h> +#include <mach/hardware.h> +#include <mach/memory.h> +#include <mach/gpio.h> + #include <asm/mach-types.h> #include "musb_core.h" @@ -370,12 +371,6 @@ int musb_platform_set_mode(struct musb *musb, u8 mode) return -EIO; } -int musb_platform_set_mode(struct musb *musb, u8 mode) -{ - /* EVM can't do this (right?) */ - return -EIO; -} - int __init musb_platform_init(struct musb *musb) { void __iomem *tibase = musb->ctrl_base; diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 6c7faacfb53..2cc34fa05b7 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1824,8 +1824,9 @@ static void musb_free(struct musb *musb) musb_gadget_cleanup(musb); #endif - if (musb->nIrq >= 0 && musb->irq_wake) { - disable_irq_wake(musb->nIrq); + if (musb->nIrq >= 0) { + if (musb->irq_wake) + disable_irq_wake(musb->nIrq); free_irq(musb->nIrq, musb); } if (is_dma_capable() && musb->dma_controller) { diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 6197daeab8f..4ea30538798 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -874,10 +874,10 @@ static int musb_gadget_enable(struct usb_ep *ep, status = -EBUSY; goto fail; } - musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + musb_ep->type = usb_endpoint_type(desc); /* check direction and (later) maxpacket size against endpoint */ - if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum) + if (usb_endpoint_num(desc) != epnum) goto fail; /* REVISIT this rules out high bandwidth periodic transfers */ @@ -890,7 +890,7 @@ static int musb_gadget_enable(struct usb_ep *ep, * packet size (or fail), set the mode, clear the fifo */ musb_ep_select(mbase, epnum); - if (desc->bEndpointAddress & USB_DIR_IN) { + if (usb_endpoint_dir_in(desc)) { u16 int_txe = musb_readw(mbase, MUSB_INTRTXE); if (hw_ep->is_shared_fifo) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 99fa6123487..a035ceccf95 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1847,8 +1847,8 @@ static int musb_urb_enqueue( goto done; } - qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + qh->epnum = usb_endpoint_num(epd); + qh->type = usb_endpoint_type(epd); /* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */ qh->addr_reg = (u8) usb_pipedevice(urb->pipe); diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 52f7f29cebd..7e073a0d7ac 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -15,8 +15,8 @@ #include <linux/usb.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <asm/arch/dma.h> -#include <asm/arch/mux.h> +#include <mach/dma.h> +#include <mach/mux.h> #include "musb_core.h" diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 8e8dbdb9b39..ee55b449ffd 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -6,14 +6,14 @@ comment "OTG and related infrastructure" -if USB || USB_GADGET - config USB_OTG_UTILS bool help Select this to make sure the build includes objects from the OTG infrastructure directory. +if USB || USB_GADGET + # # USB Transceiver Drivers # diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index cfaf1f08553..027f4b7dde8 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -85,6 +85,8 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ + { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */ + { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c70a8f667d8..75597337583 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -660,6 +660,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, + { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, + { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 373ee09975b..1b62eff475d 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -854,6 +854,10 @@ #define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ #define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ +/* Alti-2 products http://www.alti-2.com */ +#define ALTI2_VID 0x1BC9 +#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ @@ -881,6 +885,11 @@ #define RATOC_PRODUCT_ID_USB60F 0xb020 /* + * DIEBOLD BCS SE923 + */ +#define DIEBOLD_BCS_SE923_PID 0xfb99 + +/* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0 diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5ed183477aa..6c89da9c6fe 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -158,6 +158,13 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define HUAWEI_PRODUCT_E143E 0x143E #define HUAWEI_PRODUCT_E143F 0x143F +#define QUANTA_VENDOR_ID 0x0408 +#define QUANTA_PRODUCT_Q101 0xEA02 +#define QUANTA_PRODUCT_Q111 0xEA03 +#define QUANTA_PRODUCT_GLX 0xEA04 +#define QUANTA_PRODUCT_GKE 0xEA05 +#define QUANTA_PRODUCT_GLE 0xEA06 + #define NOVATELWIRELESS_VENDOR_ID 0x1410 /* YISO PRODUCTS */ @@ -224,7 +231,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define ONDA_VENDOR_ID 0x19d2 #define ONDA_PRODUCT_MSA501HS 0x0001 #define ONDA_PRODUCT_ET502HS 0x0002 -#define ONDA_PRODUCT_MT503HS 0x0200 +#define ONDA_PRODUCT_MT503HS 0x2000 #define BANDRICH_VENDOR_ID 0x1A8D #define BANDRICH_PRODUCT_C100_1 0x1002 @@ -298,6 +305,11 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 3cf41df302d..baf591137b8 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -184,6 +184,7 @@ static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, }; static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { @@ -191,6 +192,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, }; static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = { @@ -205,6 +207,7 @@ static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { } }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index 7e4752fbf23..b7ea5dbadee 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -27,7 +27,9 @@ /* Vendor and product ids */ #define TI_VENDOR_ID 0x0451 +#define IBM_VENDOR_ID 0x04b3 #define TI_3410_PRODUCT_ID 0x3410 +#define IBM_4543_PRODUCT_ID 0x4543 #define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */ #define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */ #define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index a7f9513fa19..69269f73956 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -995,6 +995,16 @@ UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), +/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net> + * Support the following product : + * "Dane-Elec MediaTouch" + */ +UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000, + "RockChip", + "MTP", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), + /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com> * This USB MP3/AVI player device fails and disconnects if more than 128 * sectors (64kB) are read/written in a single command, and may be present @@ -1251,6 +1261,13 @@ UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */ +UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001, + "Argosy", + "Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. * Flag will support Bulk devices which use a standards-violating 32-byte * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with @@ -1589,6 +1606,13 @@ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NO_WP_DETECT ), +/* Reported by The Solutor <thesolutor@gmail.com> */ +UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000, + "Sony Ericsson", + "MD400", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE), + /* Reported by Jan Mate <mate@fiit.stuba.sk> * and by Soeren Sonnenburg <kernel@nn7.de> */ UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, @@ -2031,15 +2055,11 @@ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), -/* Reported by Mauro Andreolini <andreoli@weblab.ing.unimo.it> - * This entry is needed to bypass the ZeroCD mechanism - * and to properly load as a modem device. - */ -UNUSUAL_DEV( 0x19d2, 0x2000, 0x0000, 0x0000, - "Onda ET502HS", - "USB MMC Storage", +UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, + "ST", + "2A", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_IGNORE_DEVICE), + US_FL_FIX_CAPACITY), /* patch submitted by Davide Perini <perini.davide@dpsoftware.org> * and Renato Perini <rperini@email.it> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index c94f71980c1..f0267706cb4 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -41,7 +41,7 @@ menuconfig FB You need an utility program called fbset to make full use of frame buffer devices. Please read <file:Documentation/fb/framebuffer.txt> and the Framebuffer-HOWTO at - <http://www.tahallah.demon.co.uk/programming/prog.html> for more + <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more information. Say Y here and to the driver for your graphics board below if you diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c index 2c5567175dc..359fc64e761 100644 --- a/drivers/video/aty/radeon_i2c.c +++ b/drivers/video/aty/radeon_i2c.c @@ -72,7 +72,6 @@ static int radeon_setup_i2c_bus(struct radeon_i2c_chan *chan, const char *name) snprintf(chan->adapter.name, sizeof(chan->adapter.name), "radeonfb %s", name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_RADEON; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->rinfo->pdev->dev; chan->algo.setsda = radeon_gpio_setsda; diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c index 7787c3322ff..9dd55e5324a 100644 --- a/drivers/video/i810/i810-i2c.c +++ b/drivers/video/i810/i810-i2c.c @@ -90,7 +90,6 @@ static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name) chan->adapter.owner = THIS_MODULE; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->dev->dev; - chan->adapter.id = I2C_HW_B_I810; chan->algo.setsda = i810i2c_setsda; chan->algo.setscl = i810i2c_setscl; chan->algo.getsda = i810i2c_getsda; diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c index 5d896b81f4e..b3065492bb2 100644 --- a/drivers/video/intelfb/intelfb_i2c.c +++ b/drivers/video/intelfb/intelfb_i2c.c @@ -111,7 +111,6 @@ static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo, "intelfb %s", name); chan->adapter.class = class; chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_INTELFB; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->dinfo->pdev->dev; chan->algo.setsda = intelfb_gpio_setsda; diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c index 6fd7cb8f9b8..6aaddb4f678 100644 --- a/drivers/video/nvidia/nv_i2c.c +++ b/drivers/video/nvidia/nv_i2c.c @@ -87,7 +87,6 @@ static int nvidia_setup_i2c_bus(struct nvidia_i2c_chan *chan, const char *name, strcpy(chan->adapter.name, name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_NVIDIA; chan->adapter.class = i2c_class; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->pci_dev->dev; diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index 6e2ea751876..ab394925667 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c @@ -800,14 +800,14 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode, /* FIXME: * According to errata some platforms have a clock rate limitiation */ - lcdc.lcd_ck = clk_get(NULL, "lcd_ck"); + lcdc.lcd_ck = clk_get(fbdev->dev, "lcd_ck"); if (IS_ERR(lcdc.lcd_ck)) { dev_err(fbdev->dev, "unable to access LCD clock\n"); r = PTR_ERR(lcdc.lcd_ck); goto fail0; } - tc_ck = clk_get(NULL, "tc_ck"); + tc_ck = clk_get(fbdev->dev, "tc_ck"); if (IS_ERR(tc_ck)) { dev_err(fbdev->dev, "unable to access TC clock\n"); r = PTR_ERR(tc_ck); diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c index 783d4adffb9..574b29e9f8f 100644 --- a/drivers/video/savage/savagefb-i2c.c +++ b/drivers/video/savage/savagefb-i2c.c @@ -137,7 +137,6 @@ static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan, if (chan->par) { strcpy(chan->adapter.name, name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_SAVAGE; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->pcidev->dev; chan->algo.udelay = 10; diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 3efa12f9ee5..09a3d5522b4 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -187,10 +187,10 @@ config EP93XX_WATCHDOG config OMAP_WATCHDOG tristate "OMAP Watchdog" - depends on ARCH_OMAP16XX || ARCH_OMAP24XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX help - Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog. Say 'Y' here to - enable the OMAP1610/OMAP1710 watchdog timer. + Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog. Say 'Y' + here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer. config PNX4008_WATCHDOG tristate "PNX4008 Watchdog" diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index 993e5f52afe..5531691f46e 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -13,6 +13,7 @@ #include <linux/errno.h> #include <linux/fs.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/kernel.h> #include <linux/miscdevice.h> #include <linux/module.h> diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 2ba8f95516a..efa4b363ce7 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -498,7 +498,7 @@ static ssize_t store_target_kb(struct sys_device *dev, if (!capable(CAP_SYS_ADMIN)) return -EPERM; - target_bytes = memparse(buf, &endchar); + target_bytes = simple_strtoull(buf, &endchar, 0) * 1024; balloon_set_new_target(target_bytes >> PAGE_SHIFT); @@ -508,8 +508,39 @@ static ssize_t store_target_kb(struct sys_device *dev, static SYSDEV_ATTR(target_kb, S_IRUGO | S_IWUSR, show_target_kb, store_target_kb); + +static ssize_t show_target(struct sys_device *dev, struct sysdev_attribute *attr, + char *buf) +{ + return sprintf(buf, "%llu\n", + (u64)balloon_stats.target_pages << PAGE_SHIFT); +} + +static ssize_t store_target(struct sys_device *dev, + struct sysdev_attribute *attr, + const char *buf, + size_t count) +{ + char *endchar; + unsigned long long target_bytes; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + target_bytes = memparse(buf, &endchar); + + balloon_set_new_target(target_bytes >> PAGE_SHIFT); + + return count; +} + +static SYSDEV_ATTR(target, S_IRUGO | S_IWUSR, + show_target, store_target); + + static struct sysdev_attribute *balloon_attrs[] = { &attr_target_kb, + &attr_target, }; static struct attribute *balloon_info_attrs[] = { |