diff options
Diffstat (limited to 'drivers')
38 files changed, 246 insertions, 126 deletions
diff --git a/drivers/acpi/sleep/Makefile b/drivers/acpi/sleep/Makefile index ba9bd403d44..f1fb888c2d2 100644 --- a/drivers/acpi/sleep/Makefile +++ b/drivers/acpi/sleep/Makefile @@ -1,5 +1,5 @@ obj-y := wakeup.o -obj-$(CONFIG_ACPI_SLEEP) += main.o +obj-y += main.o obj-$(CONFIG_ACPI_SLEEP) += proc.o EXTRA_CFLAGS += $(ACPI_CFLAGS) diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index 85633c585aa..2cbb9aabd00 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -24,7 +24,30 @@ u8 sleep_states[ACPI_S_STATE_COUNT]; +#ifdef CONFIG_PM_SLEEP static u32 acpi_target_sleep_state = ACPI_STATE_S0; +#endif + +int acpi_sleep_prepare(u32 acpi_state) +{ +#ifdef CONFIG_ACPI_SLEEP + /* do we have a wakeup address for S2 and S3? */ + if (acpi_state == ACPI_STATE_S3) { + if (!acpi_wakeup_address) { + return -EFAULT; + } + acpi_set_firmware_waking_vector((acpi_physical_address) + virt_to_phys((void *) + acpi_wakeup_address)); + + } + ACPI_FLUSH_CPU_CACHE(); + acpi_enable_wakeup_device_prep(acpi_state); +#endif + acpi_gpe_sleep_prepare(acpi_state); + acpi_enter_sleep_state_prep(acpi_state); + return 0; +} #ifdef CONFIG_SUSPEND static struct pm_ops acpi_pm_ops; @@ -60,27 +83,6 @@ static int acpi_pm_set_target(suspend_state_t pm_state) return error; } -int acpi_sleep_prepare(u32 acpi_state) -{ -#ifdef CONFIG_ACPI_SLEEP - /* do we have a wakeup address for S2 and S3? */ - if (acpi_state == ACPI_STATE_S3) { - if (!acpi_wakeup_address) { - return -EFAULT; - } - acpi_set_firmware_waking_vector((acpi_physical_address) - virt_to_phys((void *) - acpi_wakeup_address)); - - } - ACPI_FLUSH_CPU_CACHE(); - acpi_enable_wakeup_device_prep(acpi_state); -#endif - acpi_gpe_sleep_prepare(acpi_state); - acpi_enter_sleep_state_prep(acpi_state); - return 0; -} - /** * acpi_pm_prepare - Do preliminary suspend work. * @pm_state: ignored @@ -299,6 +301,7 @@ int acpi_suspend(u32 acpi_state) return -EINVAL; } +#ifdef CONFIG_PM_SLEEP /** * acpi_pm_device_sleep_state - return preferred power state of ACPI device * in the system sleep state given by %acpi_target_sleep_state @@ -373,6 +376,7 @@ int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p) *d_min_p = d_min; return d_max; } +#endif static void acpi_power_off_prepare(void) { diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 3b8bf1812dc..6996eb5b750 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -921,6 +921,13 @@ static int piix_broken_suspend(void) { static struct dmi_system_id sysids[] = { { + .ident = "TECRA M3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M3"), + }, + }, + { .ident = "TECRA M5", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 2bd7645f1a8..cce2834b2b6 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -375,8 +375,9 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) int drive_pci = sis_old_port_base(adev); u16 timing; + /* MWDMA 0-2 and UDMA 0-5 */ const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; - const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000}; + const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 }; pci_read_config_word(pdev, drive_pci, &timing); diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index ef83e6b1e31..233e8869339 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -888,6 +888,16 @@ static inline void sil24_host_intr(struct ata_port *ap) u32 slot_stat, qc_active; int rc; + /* If PCIX_IRQ_WOC, there's an inherent race window between + * clearing IRQ pending status and reading PORT_SLOT_STAT + * which may cause spurious interrupts afterwards. This is + * unavoidable and much better than losing interrupts which + * happens if IRQ pending is cleared after reading + * PORT_SLOT_STAT. + */ + if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); + slot_stat = readl(port + PORT_SLOT_STAT); if (unlikely(slot_stat & HOST_SSTAT_ATTN)) { @@ -895,9 +905,6 @@ static inline void sil24_host_intr(struct ata_port *ap) return; } - if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) - writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); - qc_active = slot_stat & ~HOST_SSTAT_ATTN; rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc); if (rc > 0) @@ -910,7 +917,8 @@ static inline void sil24_host_intr(struct ata_port *ap) return; } - if (ata_ratelimit()) + /* spurious interrupts are expected if PCIX_IRQ_WOC */ + if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit()) ata_port_printk(ap, KERN_INFO, "spurious interrupt " "(slot_stat 0x%x active_tag %d sactive 0x%x)\n", slot_stat, ap->active_tag, ap->sactive); diff --git a/drivers/base/core.c b/drivers/base/core.c index 6de33d7a29b..67c92582d6e 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -284,6 +284,7 @@ static ssize_t show_uevent(struct device *dev, struct device_attribute *attr, /* let the kset specific function add its keys */ pos = data; + memset(envp, 0, sizeof(envp)); retval = kset->uevent_ops->uevent(kset, &dev->kobj, envp, ARRAY_SIZE(envp), pos, PAGE_SIZE); diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index 67ee3d4b287..79245714f0a 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -1032,6 +1032,10 @@ int cdrom_open(struct cdrom_device_info *cdi, struct inode *ip, struct file *fp) check_disk_change(ip->i_bdev); return 0; err_release: + if (CDROM_CAN(CDC_LOCK) && cdi->options & CDO_LOCK) { + cdi->ops->lock_door(cdi, 0); + cdinfo(CD_OPEN, "door unlocked.\n"); + } cdi->ops->release(cdi); err: cdi->use_count--; diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h index 737088bd078..28b98733beb 100644 --- a/drivers/char/drm/i915_drv.h +++ b/drivers/char/drm/i915_drv.h @@ -210,6 +210,12 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define I915REG_INT_MASK_R 0x020a8 #define I915REG_INT_ENABLE_R 0x020a0 +#define I915REG_PIPEASTAT 0x70024 +#define I915REG_PIPEBSTAT 0x71024 + +#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17) +#define I915_VBLANK_CLEAR (1UL<<1) + #define SRX_INDEX 0x3c4 #define SRX_DATA 0x3c5 #define SR01 1 diff --git a/drivers/char/drm/i915_irq.c b/drivers/char/drm/i915_irq.c index 4b4b2ce8986..bb8e9e9c820 100644 --- a/drivers/char/drm/i915_irq.c +++ b/drivers/char/drm/i915_irq.c @@ -214,6 +214,10 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) struct drm_device *dev = (struct drm_device *) arg; drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; u16 temp; + u32 pipea_stats, pipeb_stats; + + pipea_stats = I915_READ(I915REG_PIPEASTAT); + pipeb_stats = I915_READ(I915REG_PIPEBSTAT); temp = I915_READ16(I915REG_INT_IDENTITY_R); @@ -225,6 +229,8 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) return IRQ_NONE; I915_WRITE16(I915REG_INT_IDENTITY_R, temp); + (void) I915_READ16(I915REG_INT_IDENTITY_R); + DRM_READMEMORYBARRIER(); dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv); @@ -252,6 +258,12 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) if (dev_priv->swaps_pending > 0) drm_locked_tasklet(dev, i915_vblank_tasklet); + I915_WRITE(I915REG_PIPEASTAT, + pipea_stats|I915_VBLANK_INTERRUPT_ENABLE| + I915_VBLANK_CLEAR); + I915_WRITE(I915REG_PIPEBSTAT, + pipeb_stats|I915_VBLANK_INTERRUPT_ENABLE| + I915_VBLANK_CLEAR); } return IRQ_HANDLED; diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c index 7ecffc9c738..4c16778e3f8 100644 --- a/drivers/char/hpet.c +++ b/drivers/char/hpet.c @@ -62,6 +62,8 @@ static u32 hpet_nhpet, hpet_max_freq = HPET_USER_FREQ; +/* This clocksource driver currently only works on ia64 */ +#ifdef CONFIG_IA64 static void __iomem *hpet_mctr; static cycle_t read_hpet(void) @@ -79,6 +81,7 @@ static struct clocksource clocksource_hpet = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; static struct clocksource *hpet_clocksource; +#endif /* A lock for concurrent access by app and isr hpet activity. */ static DEFINE_SPINLOCK(hpet_lock); @@ -943,14 +946,14 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data) printk(KERN_DEBUG "%s: 0x%lx is busy\n", __FUNCTION__, hdp->hd_phys_address); iounmap(hdp->hd_address); - return -EBUSY; + return AE_ALREADY_EXISTS; } } else if (res->type == ACPI_RESOURCE_TYPE_FIXED_MEMORY32) { struct acpi_resource_fixed_memory32 *fixmem32; fixmem32 = &res->data.fixed_memory32; if (!fixmem32) - return -EINVAL; + return AE_NO_MEMORY; hdp->hd_phys_address = fixmem32->address; hdp->hd_address = ioremap(fixmem32->address, @@ -960,7 +963,7 @@ static acpi_status hpet_resources(struct acpi_resource *res, void *data) printk(KERN_DEBUG "%s: 0x%lx is busy\n", __FUNCTION__, hdp->hd_phys_address); iounmap(hdp->hd_address); - return -EBUSY; + return AE_ALREADY_EXISTS; } } else if (res->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) { struct acpi_resource_extended_irq *irqp; diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c index 049a46cc9f8..04ac155d3a0 100644 --- a/drivers/char/mspec.c +++ b/drivers/char/mspec.c @@ -155,23 +155,22 @@ mspec_open(struct vm_area_struct *vma) * mspec_close * * Called when unmapping a device mapping. Frees all mspec pages - * belonging to the vma. + * belonging to all the vma's sharing this vma_data structure. */ static void mspec_close(struct vm_area_struct *vma) { struct vma_data *vdata; - int index, last_index, result; + int index, last_index; unsigned long my_page; vdata = vma->vm_private_data; - BUG_ON(vma->vm_start < vdata->vm_start || vma->vm_end > vdata->vm_end); + if (!atomic_dec_and_test(&vdata->refcnt)) + return; - spin_lock(&vdata->lock); - index = (vma->vm_start - vdata->vm_start) >> PAGE_SHIFT; - last_index = (vma->vm_end - vdata->vm_start) >> PAGE_SHIFT; - for (; index < last_index; index++) { + last_index = (vdata->vm_end - vdata->vm_start) >> PAGE_SHIFT; + for (index = 0; index < last_index; index++) { if (vdata->maddr[index] == 0) continue; /* @@ -180,20 +179,12 @@ mspec_close(struct vm_area_struct *vma) */ my_page = vdata->maddr[index]; vdata->maddr[index] = 0; - spin_unlock(&vdata->lock); - result = mspec_zero_block(my_page, PAGE_SIZE); - if (!result) + if (!mspec_zero_block(my_page, PAGE_SIZE)) uncached_free_page(my_page); else printk(KERN_WARNING "mspec_close(): " - "failed to zero page %i\n", - result); - spin_lock(&vdata->lock); + "failed to zero page %ld\n", my_page); } - spin_unlock(&vdata->lock); - - if (!atomic_dec_and_test(&vdata->refcnt)) - return; if (vdata->flags & VMD_VMALLOCED) vfree(vdata); @@ -201,7 +192,6 @@ mspec_close(struct vm_area_struct *vma) kfree(vdata); } - /* * mspec_nopfn * diff --git a/drivers/char/random.c b/drivers/char/random.c index 397c714cf2b..af274e5a25e 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1550,11 +1550,13 @@ __u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr, * As close as possible to RFC 793, which * suggests using a 250 kHz clock. * Further reading shows this assumes 2 Mb/s networks. - * For 10 Gb/s Ethernet, a 1 GHz clock is appropriate. - * That's funny, Linux has one built in! Use it! - * (Networks are faster now - should this be increased?) + * For 10 Mb/s Ethernet, a 1 MHz clock is appropriate. + * For 10 Gb/s Ethernet, a 1 GHz clock should be ok, but + * we also need to limit the resolution so that the u32 seq + * overlaps less than one time per MSL (2 minutes). + * Choosing a clock of 64 ns period is OK. (period of 274 s) */ - seq += ktime_get_real().tv64; + seq += ktime_get_real().tv64 >> 6; #if 0 printk("init_seq(%lx, %lx, %d, %d) = %d\n", saddr, daddr, sport, dport, seq); diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index c6f6f420973..c799b7f7bbb 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -770,6 +770,7 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, /* * Switching-from response */ + acquire_console_sem(); if (vc->vt_newvt >= 0) { if (arg == 0) /* @@ -784,7 +785,6 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, * complete the switch. */ int newvt; - acquire_console_sem(); newvt = vc->vt_newvt; vc->vt_newvt = -1; i = vc_allocate(newvt); @@ -798,7 +798,6 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, * other console switches.. */ complete_change_console(vc_cons[newvt].d); - release_console_sem(); } } @@ -810,9 +809,12 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, /* * If it's just an ACK, ignore it */ - if (arg != VT_ACKACQ) + if (arg != VT_ACKACQ) { + release_console_sem(); return -EINVAL; + } } + release_console_sem(); return 0; @@ -1208,15 +1210,18 @@ void change_console(struct vc_data *new_vc) /* * Send the signal as privileged - kill_pid() will * tell us if the process has gone or something else - * is awry + * is awry. + * + * We need to set vt_newvt *before* sending the signal or we + * have a race. */ + vc->vt_newvt = new_vc->vc_num; if (kill_pid(vc->vt_pid, vc->vt_mode.relsig, 1) == 0) { /* * It worked. Mark the vt to switch to and * return. The process needs to send us a * VT_RELDISP ioctl to complete the switch. */ - vc->vt_newvt = new_vc->vc_num; return; } diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index e2abe18e575..7c662ee594a 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -277,7 +277,7 @@ config JOYSTICK_XPAD_FF config JOYSTICK_XPAD_LEDS bool "LED Support for Xbox360 controller 'BigX' LED" - depends on LEDS_CLASS && JOYSTICK_XPAD + depends on JOYSTICK_XPAD && (LEDS_CLASS=y || LEDS_CLASS=JOYSTICK_XPAD) ---help--- This option enables support for the LED which surrounds the Big X on XBox 360 controller. diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 2bea1b2c631..a1804bfdbb8 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -328,6 +328,7 @@ static void atp_complete(struct urb* urb) { int x, y, x_z, y_z, x_f, y_f; int retval, i, j; + int key; struct atp *dev = urb->context; switch (urb->status) { @@ -468,6 +469,7 @@ static void atp_complete(struct urb* urb) ATP_XFACT, &x_z, &x_f); y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS, ATP_YFACT, &y_z, &y_f); + key = dev->data[dev->datalen - 1] & 1; if (x && y) { if (dev->x_old != -1) { @@ -505,7 +507,7 @@ static void atp_complete(struct urb* urb) the first touch unless reinitialised. Do so if it's been idle for a while in order to avoid waking the kernel up several hundred times a second */ - if (atp_is_geyser_3(dev)) { + if (!key && atp_is_geyser_3(dev)) { dev->idlecount++; if (dev->idlecount == 10) { dev->valid = 0; @@ -514,7 +516,7 @@ static void atp_complete(struct urb* urb) } } - input_report_key(dev->input, BTN_LEFT, dev->data[dev->datalen - 1] & 1); + input_report_key(dev->input, BTN_LEFT, key); input_sync(dev->input); exit: diff --git a/drivers/lguest/lguest_asm.S b/drivers/lguest/lguest_asm.S index f182c6a3620..1ddcd5cd20f 100644 --- a/drivers/lguest/lguest_asm.S +++ b/drivers/lguest/lguest_asm.S @@ -22,8 +22,9 @@ jmp lguest_init /*G:055 We create a macro which puts the assembler code between lgstart_ and - * lgend_ markers. These templates end up in the .init.text section, so they - * are discarded after boot. */ + * lgend_ markers. These templates are put in the .text section: they can't be + * discarded after boot as we may need to patch modules, too. */ +.text #define LGUEST_PATCH(name, insns...) \ lgstart_##name: insns; lgend_##name:; \ .globl lgstart_##name; .globl lgend_##name @@ -34,7 +35,6 @@ LGUEST_PATCH(popf, movl %eax, lguest_data+LGUEST_DATA_irq_enabled) LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax) /*:*/ -.text /* These demark the EIP range where host should never deliver interrupts. */ .global lguest_noirq_start .global lguest_noirq_end diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index 0285c4a830e..66ea3cbc369 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -754,9 +754,11 @@ static void ivtv_stop_decoding(struct ivtv_open_id *id, int flags, u64 pts) ivtv_yuv_close(itv); } if (s->type == IVTV_DEC_STREAM_TYPE_YUV && itv->output_mode == OUT_YUV) - itv->output_mode = OUT_NONE; + itv->output_mode = OUT_NONE; + else if (s->type == IVTV_DEC_STREAM_TYPE_YUV && itv->output_mode == OUT_UDMA_YUV) + itv->output_mode = OUT_NONE; else if (s->type == IVTV_DEC_STREAM_TYPE_MPG && itv->output_mode == OUT_MPG) - itv->output_mode = OUT_NONE; + itv->output_mode = OUT_NONE; itv->speed = 0; clear_bit(IVTV_F_I_DEC_PAUSED, &itv->i_flags); diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index e3371f97224..0cb006f2943 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -1387,7 +1387,6 @@ static const struct file_operations usbvision_fops = { .ioctl = video_ioctl2, .llseek = no_llseek, /* .poll = video_poll, */ - .mmap = usbvision_v4l2_mmap, .compat_ioctl = v4l_compat_ioctl32, }; static struct video_device usbvision_video_template = { @@ -1413,7 +1412,7 @@ static struct video_device usbvision_video_template = { .vidioc_s_input = vidioc_s_input, .vidioc_queryctrl = vidioc_queryctrl, .vidioc_g_audio = vidioc_g_audio, - .vidioc_g_audio = vidioc_s_audio, + .vidioc_s_audio = vidioc_s_audio, .vidioc_g_ctrl = vidioc_g_ctrl, .vidioc_s_ctrl = vidioc_s_ctrl, .vidioc_streamon = vidioc_streamon, @@ -1459,7 +1458,7 @@ static struct video_device usbvision_radio_template= .vidioc_s_input = vidioc_s_input, .vidioc_queryctrl = vidioc_queryctrl, .vidioc_g_audio = vidioc_g_audio, - .vidioc_g_audio = vidioc_s_audio, + .vidioc_s_audio = vidioc_s_audio, .vidioc_g_ctrl = vidioc_g_ctrl, .vidioc_s_ctrl = vidioc_s_ctrl, .vidioc_g_tuner = vidioc_g_tuner, diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 4c3785c9d4b..9ecc3adcf6c 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1726,6 +1726,7 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wol case E1000_DEV_ID_82571EB_QUAD_COPPER: case E1000_DEV_ID_82571EB_QUAD_FIBER: case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: + case E1000_DEV_ID_82571PT_QUAD_COPPER: case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: /* quad port adapters only support WoL on port A */ if (!adapter->quad_port_a) { diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index ba120f7fb0b..8604adbe351 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -387,6 +387,7 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82571EB_SERDES_DUAL: case E1000_DEV_ID_82571EB_SERDES_QUAD: case E1000_DEV_ID_82571EB_QUAD_COPPER: + case E1000_DEV_ID_82571PT_QUAD_COPPER: case E1000_DEV_ID_82571EB_QUAD_FIBER: case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: hw->mac_type = e1000_82571; diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index fe8714655c9..07f0ea73676 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -475,6 +475,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #define E1000_DEV_ID_82571EB_FIBER 0x105F #define E1000_DEV_ID_82571EB_SERDES 0x1060 #define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4 +#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5 #define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5 #define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE 0x10BC #define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9 diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 4a225950fb4..e7c8951f47f 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -108,6 +108,7 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x10BC), INTEL_E1000_ETHERNET_DEVICE(0x10C4), INTEL_E1000_ETHERNET_DEVICE(0x10C5), + INTEL_E1000_ETHERNET_DEVICE(0x10D5), INTEL_E1000_ETHERNET_DEVICE(0x10D9), INTEL_E1000_ETHERNET_DEVICE(0x10DA), /* required last entry */ @@ -1101,6 +1102,7 @@ e1000_probe(struct pci_dev *pdev, case E1000_DEV_ID_82571EB_QUAD_COPPER: case E1000_DEV_ID_82571EB_QUAD_FIBER: case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: + case E1000_DEV_ID_82571PT_QUAD_COPPER: /* if quad port adapter, disable WoL on all but port A */ if (global_quad_port_a != 0) adapter->eeprom_wol = 0; diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 6a117e9968c..315335671f0 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -534,7 +534,7 @@ static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id) } /* PHY status changed */ - if (eth_int_cause_ext & ETH_INT_CAUSE_PHY) { + if (eth_int_cause_ext & (ETH_INT_CAUSE_PHY | ETH_INT_CAUSE_STATE)) { struct ethtool_cmd cmd; if (mii_link_ok(&mp->mii)) { @@ -1357,7 +1357,6 @@ static int mv643xx_eth_probe(struct platform_device *pdev) #endif dev->watchdog_timeo = 2 * HZ; - dev->tx_queue_len = mp->tx_ring_size; dev->base_addr = 0; dev->change_mtu = mv643xx_eth_change_mtu; dev->do_ioctl = mv643xx_eth_do_ioctl; @@ -2768,8 +2767,6 @@ static const struct ethtool_ops mv643xx_ethtool_ops = { .get_stats_count = mv643xx_get_stats_count, .get_ethtool_stats = mv643xx_get_ethtool_stats, .get_strings = mv643xx_get_strings, - .get_stats_count = mv643xx_get_stats_count, - .get_ethtool_stats = mv643xx_get_ethtool_stats, .nway_reset = mv643xx_eth_nway_restart, }; diff --git a/drivers/net/mv643xx_eth.h b/drivers/net/mv643xx_eth.h index 82f8c0cbfb6..565b96696ac 100644 --- a/drivers/net/mv643xx_eth.h +++ b/drivers/net/mv643xx_eth.h @@ -64,7 +64,9 @@ #define ETH_INT_CAUSE_TX_ERROR (ETH_TX_QUEUES_ENABLED << 8) #define ETH_INT_CAUSE_TX (ETH_INT_CAUSE_TX_DONE | ETH_INT_CAUSE_TX_ERROR) #define ETH_INT_CAUSE_PHY 0x00010000 -#define ETH_INT_UNMASK_ALL_EXT (ETH_INT_CAUSE_TX | ETH_INT_CAUSE_PHY) +#define ETH_INT_CAUSE_STATE 0x00100000 +#define ETH_INT_UNMASK_ALL_EXT (ETH_INT_CAUSE_TX | ETH_INT_CAUSE_PHY | \ + ETH_INT_CAUSE_STATE) #define ETH_INT_MASK_ALL 0x00000000 #define ETH_INT_MASK_ALL_EXT 0x00000000 diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index c06cae3f0b5..503f2685fb7 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -116,7 +116,7 @@ struct el3_private { spinlock_t lock; }; -static const char *if_names[] = { "auto", "10base2", "10baseT", "AUI" }; +static const char *if_names[] = { "auto", "10baseT", "10base2", "AUI" }; /*====================================================================*/ diff --git a/drivers/net/ppp_mppe.c b/drivers/net/ppp_mppe.c index f79cf87a2bf..c0b6d19d145 100644 --- a/drivers/net/ppp_mppe.c +++ b/drivers/net/ppp_mppe.c @@ -136,7 +136,7 @@ struct ppp_mppe_state { * Key Derivation, from RFC 3078, RFC 3079. * Equivalent to Get_Key() for MS-CHAP as described in RFC 3079. */ -static void get_new_key_from_sha(struct ppp_mppe_state * state, unsigned char *InterimKey) +static void get_new_key_from_sha(struct ppp_mppe_state * state) { struct hash_desc desc; struct scatterlist sg[4]; @@ -153,8 +153,6 @@ static void get_new_key_from_sha(struct ppp_mppe_state * state, unsigned char *I desc.flags = 0; crypto_hash_digest(&desc, sg, nbytes, state->sha1_digest); - - memcpy(InterimKey, state->sha1_digest, state->keylen); } /* @@ -163,21 +161,21 @@ static void get_new_key_from_sha(struct ppp_mppe_state * state, unsigned char *I */ static void mppe_rekey(struct ppp_mppe_state * state, int initial_key) { - unsigned char InterimKey[MPPE_MAX_KEY_LEN]; struct scatterlist sg_in[1], sg_out[1]; struct blkcipher_desc desc = { .tfm = state->arc4 }; - get_new_key_from_sha(state, InterimKey); + get_new_key_from_sha(state); if (!initial_key) { - crypto_blkcipher_setkey(state->arc4, InterimKey, state->keylen); - setup_sg(sg_in, InterimKey, state->keylen); + crypto_blkcipher_setkey(state->arc4, state->sha1_digest, + state->keylen); + setup_sg(sg_in, state->sha1_digest, state->keylen); setup_sg(sg_out, state->session_key, state->keylen); if (crypto_blkcipher_encrypt(&desc, sg_out, sg_in, state->keylen) != 0) { printk(KERN_WARNING "mppe_rekey: cipher_encrypt failed\n"); } } else { - memcpy(state->session_key, InterimKey, state->keylen); + memcpy(state->session_key, state->sha1_digest, state->keylen); } if (state->keylen == 8) { /* See RFC 3078 */ diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 69da95b5ad0..ea151315050 100755 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -2248,6 +2248,13 @@ static int ql_tx_rx_clean(struct ql3_adapter *qdev, qdev->rsp_consumer_index) && (work_done < work_to_do)) { net_rsp = qdev->rsp_current; + rmb(); + /* + * Fix 4032 chipe undocumented "feature" where bit-8 is set if the + * inbound completion is for a VLAN. + */ + if (qdev->device_id == QL3032_DEVICE_ID) + net_rsp->opcode &= 0x7f; switch (net_rsp->opcode) { case OPCODE_OB_MAC_IOCB_FN0: diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index b85ab4a8f2a..c921ec32c23 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1228,7 +1228,10 @@ static void rtl8169_hw_phy_config(struct net_device *dev) return; } - /* phy config for RTL8169s mac_version C chip */ + if ((tp->mac_version != RTL_GIGA_MAC_VER_02) && + (tp->mac_version != RTL_GIGA_MAC_VER_03)) + return; + mdio_write(ioaddr, 31, 0x0001); //w 31 2 0 1 mdio_write(ioaddr, 21, 0x1000); //w 21 15 0 1000 mdio_write(ioaddr, 24, 0x65c7); //w 24 15 0 65c7 @@ -2567,6 +2570,15 @@ static void rtl8169_tx_interrupt(struct net_device *dev, (TX_BUFFS_AVAIL(tp) >= MAX_SKB_FRAGS)) { netif_wake_queue(dev); } + /* + * 8168 hack: TxPoll requests are lost when the Tx packets are + * too close. Let's kick an extra TxPoll request when a burst + * of start_xmit activity is detected (if it is not detected, + * it is slow enough). -- FR + */ + smp_rmb(); + if (tp->cur_tx != dirty_tx) + RTL_W8(TxPoll, NPQ); } } diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index eaffe551d1d..162489b9f59 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -338,6 +338,16 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) if (!(hw->flags & SKY2_HW_GIGABIT)) { /* enable automatic crossover */ ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO) >> 1; + + if (hw->chip_id == CHIP_ID_YUKON_FE_P && + hw->chip_rev == CHIP_REV_YU_FE2_A0) { + u16 spec; + + /* Enable Class A driver for FE+ A0 */ + spec = gm_phy_read(hw, port, PHY_MARV_FE_SPEC_2); + spec |= PHY_M_FESC_SEL_CL_A; + gm_phy_write(hw, port, PHY_MARV_FE_SPEC_2, spec); + } } else { /* disable energy detect */ ctrl &= ~PHY_M_PC_EN_DET_MSK; @@ -816,7 +826,8 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); - if (!(hw->flags & SKY2_HW_RAMBUFFER)) { + /* On chips without ram buffer, pause is controled by MAC level */ + if (sky2_read8(hw, B2_E_0) == 0) { sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8); sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8); @@ -899,6 +910,20 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2) return le; } +static void tx_init(struct sky2_port *sky2) +{ + struct sky2_tx_le *le; + + sky2->tx_prod = sky2->tx_cons = 0; + sky2->tx_tcpsum = 0; + sky2->tx_last_mss = 0; + + le = get_tx_le(sky2); + le->addr = 0; + le->opcode = OP_ADDR64 | HW_OWNER; + sky2->tx_addr64 = 0; +} + static inline struct tx_ring_info *tx_le_re(struct sky2_port *sky2, struct sky2_tx_le *le) { @@ -1271,7 +1296,7 @@ static int sky2_up(struct net_device *dev) struct sky2_port *sky2 = netdev_priv(dev); struct sky2_hw *hw = sky2->hw; unsigned port = sky2->port; - u32 imask; + u32 imask, ramsize; int cap, err = -ENOMEM; struct net_device *otherdev = hw->dev[sky2->port^1]; @@ -1309,7 +1334,8 @@ static int sky2_up(struct net_device *dev) GFP_KERNEL); if (!sky2->tx_ring) goto err_out; - sky2->tx_prod = sky2->tx_cons = 0; + + tx_init(sky2); sky2->rx_le = pci_alloc_consistent(hw->pdev, RX_LE_BYTES, &sky2->rx_le_map); @@ -1326,13 +1352,12 @@ static int sky2_up(struct net_device *dev) sky2_mac_init(hw, port); - if (hw->flags & SKY2_HW_RAMBUFFER) { - /* Register is number of 4K blocks on internal RAM buffer. */ - u32 ramsize = sky2_read8(hw, B2_E_0) * 4; + /* Register is number of 4K blocks on internal RAM buffer. */ + ramsize = sky2_read8(hw, B2_E_0) * 4; + if (ramsize > 0) { u32 rxspace; - printk(KERN_DEBUG PFX "%s: ram buffer %dK\n", dev->name, ramsize); - + pr_debug(PFX "%s: ram buffer %dK\n", dev->name, ramsize); if (ramsize < 16) rxspace = ramsize / 2; else @@ -1995,7 +2020,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) synchronize_irq(hw->pdev->irq); - if (!(hw->flags & SKY2_HW_RAMBUFFER)) + if (sky2_read8(hw, B2_E_0) == 0) sky2_set_tx_stfwd(hw, port); ctl = gma_read16(hw, port, GM_GP_CTRL); @@ -2138,6 +2163,18 @@ static struct sk_buff *sky2_receive(struct net_device *dev, sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; prefetch(sky2->rx_ring + sky2->rx_next); + if (length < ETH_ZLEN || length > sky2->rx_data_size) + goto len_error; + + /* This chip has hardware problems that generates bogus status. + * So do only marginal checking and expect higher level protocols + * to handle crap frames. + */ + if (sky2->hw->chip_id == CHIP_ID_YUKON_FE_P && + sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0 && + length != count) + goto okay; + if (status & GMR_FS_ANY_ERR) goto error; @@ -2146,8 +2183,9 @@ static struct sk_buff *sky2_receive(struct net_device *dev, /* if length reported by DMA does not match PHY, packet was truncated */ if (length != count) - goto len_mismatch; + goto len_error; +okay: if (length < copybreak) skb = receive_copy(sky2, re, length); else @@ -2157,13 +2195,13 @@ resubmit: return skb; -len_mismatch: +len_error: /* Truncation of overlength packets causes PHY length to not match MAC length */ ++sky2->net_stats.rx_length_errors; if (netif_msg_rx_err(sky2) && net_ratelimit()) - pr_info(PFX "%s: rx length mismatch: length %d status %#x\n", - dev->name, length, status); + pr_info(PFX "%s: rx length error: status %#x length %d\n", + dev->name, status, length); goto resubmit; error: @@ -2526,7 +2564,7 @@ static void sky2_watchdog(unsigned long arg) ++active; /* For chips with Rx FIFO, check if stuck */ - if ((hw->flags & SKY2_HW_RAMBUFFER) && + if ((hw->flags & SKY2_HW_FIFO_HANG_CHECK) && sky2_rx_hung(dev)) { pr_info(PFX "%s: receiver hang detected\n", dev->name); @@ -2684,8 +2722,10 @@ static int __devinit sky2_init(struct sky2_hw *hw) switch(hw->chip_id) { case CHIP_ID_YUKON_XL: hw->flags = SKY2_HW_GIGABIT - | SKY2_HW_NEWER_PHY - | SKY2_HW_RAMBUFFER; + | SKY2_HW_NEWER_PHY; + if (hw->chip_rev < 3) + hw->flags |= SKY2_HW_FIFO_HANG_CHECK; + break; case CHIP_ID_YUKON_EC_U: @@ -2711,11 +2751,10 @@ static int __devinit sky2_init(struct sky2_hw *hw) dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n"); return -EOPNOTSUPP; } - hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RAMBUFFER; + hw->flags = SKY2_HW_GIGABIT | SKY2_HW_FIFO_HANG_CHECK; break; case CHIP_ID_YUKON_FE: - hw->flags = SKY2_HW_RAMBUFFER; break; case CHIP_ID_YUKON_FE_P: @@ -3923,13 +3962,6 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, sky2->hw = hw; sky2->msg_enable = netif_msg_init(debug, default_msg); - /* This chip has hardware problems that generates - * bogus PHY receive status so by default shut up the message. - */ - if (hw->chip_id == CHIP_ID_YUKON_FE_P && - hw->chip_rev == CHIP_REV_YU_FE2_A0) - sky2->msg_enable &= ~NETIF_MSG_RX_ERR; - /* Auto speed and flow control */ sky2->autoneg = AUTONEG_ENABLE; sky2->flow_mode = FC_BOTH; @@ -3953,8 +3985,12 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, dev->features |= NETIF_F_HIGHDMA; #ifdef SKY2_VLAN_TAG_USED - dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; - dev->vlan_rx_register = sky2_vlan_rx_register; + /* The workaround for FE+ status conflicts with VLAN tag detection. */ + if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P && + sky2->hw->chip_rev == CHIP_REV_YU_FE2_A0)) { + dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; + dev->vlan_rx_register = sky2_vlan_rx_register; + } #endif /* read the mac address */ diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 69cd98400fe..8bc5c54e3ef 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -2063,7 +2063,7 @@ struct sky2_hw { #define SKY2_HW_FIBRE_PHY 0x00000002 #define SKY2_HW_GIGABIT 0x00000004 #define SKY2_HW_NEWER_PHY 0x00000008 -#define SKY2_HW_RAMBUFFER 0x00000010 /* chip has RAM FIFO */ +#define SKY2_HW_FIFO_HANG_CHECK 0x00000010 #define SKY2_HW_NEW_LE 0x00000020 /* new LSOv2 format */ #define SKY2_HW_AUTO_TX_SUM 0x00000040 /* new IP decode for Tx */ #define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */ diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 16c7a0e8785..a2de32fabc1 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -405,7 +405,7 @@ static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->ethtool_ops = &dm9601_ethtool_ops; dev->net->hard_header_len += DM_TX_OVERHEAD; dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; - dev->rx_urb_size = dev->net->mtu + DM_RX_OVERHEAD; + dev->rx_urb_size = dev->net->mtu + ETH_HLEN + DM_RX_OVERHEAD; dev->mii.dev = dev->net; dev->mii.mdio_read = dm9601_mdio_read; diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile index ef35bc6c4a2..4eb6d975288 100644 --- a/drivers/net/wireless/Makefile +++ b/drivers/net/wireless/Makefile @@ -43,7 +43,7 @@ obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o obj-$(CONFIG_USB_ZD1201) += zd1201.o -obj-$(CONFIG_LIBERTAS_USB) += libertas/ +obj-$(CONFIG_LIBERTAS) += libertas/ rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o obj-$(CONFIG_RTL8187) += rtl8187.o diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 7dcaa09b3c2..50f2dd9e1bb 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1444,7 +1444,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, quirk_netmos); static void __devinit quirk_e100_interrupt(struct pci_dev *dev) { u16 command; - u32 bar; u8 __iomem *csr; u8 cmd_hi; @@ -1476,12 +1475,12 @@ static void __devinit quirk_e100_interrupt(struct pci_dev *dev) * re-enable them when it's ready. */ pci_read_config_word(dev, PCI_COMMAND, &command); - pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar); - if (!(command & PCI_COMMAND_MEMORY) || !bar) + if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0)) return; - csr = ioremap(bar, 8); + /* Convert from PCI bus to resource space. */ + csr = ioremap(pci_resource_start(dev, 0), 8); if (!csr) { printk(KERN_WARNING "PCI: Can't map %s e100 registers\n", pci_name(dev)); diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c index 77b06a983fa..95cf7b6cd62 100644 --- a/drivers/scsi/esp_scsi.c +++ b/drivers/scsi/esp_scsi.c @@ -2314,6 +2314,7 @@ int __devinit scsi_esp_register(struct esp *esp, struct device *dev) esp->host->transportt = esp_transport_template; esp->host->max_lun = ESP_MAX_LUN; esp->host->cmd_per_lun = 2; + esp->host->unique_id = instance; esp_set_clock_params(esp); @@ -2337,7 +2338,7 @@ int __devinit scsi_esp_register(struct esp *esp, struct device *dev) if (err) return err; - esp->host->unique_id = instance++; + instance++; scsi_scan_host(esp->host); diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c index 6f56f875063..4df21c92ff1 100644 --- a/drivers/scsi/scsi_transport_spi.c +++ b/drivers/scsi/scsi_transport_spi.c @@ -787,10 +787,12 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) struct scsi_target *starget = sdev->sdev_target; struct Scsi_Host *shost = sdev->host; int len = sdev->inquiry_len; + int min_period = spi_min_period(starget); + int max_width = spi_max_width(starget); /* first set us up for narrow async */ DV_SET(offset, 0); DV_SET(width, 0); - + if (spi_dv_device_compare_inquiry(sdev, buffer, buffer, DV_LOOPS) != SPI_COMPARE_SUCCESS) { starget_printk(KERN_ERR, starget, "Domain Validation Initial Inquiry Failed\n"); @@ -798,9 +800,13 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) return; } + if (!scsi_device_wide(sdev)) { + spi_max_width(starget) = 0; + max_width = 0; + } + /* test width */ - if (i->f->set_width && spi_max_width(starget) && - scsi_device_wide(sdev)) { + if (i->f->set_width && max_width) { i->f->set_width(starget, 1); if (spi_dv_device_compare_inquiry(sdev, buffer, @@ -809,6 +815,11 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) != SPI_COMPARE_SUCCESS) { starget_printk(KERN_ERR, starget, "Wide Transfers Fail\n"); i->f->set_width(starget, 0); + /* Make sure we don't force wide back on by asking + * for a transfer period that requires it */ + max_width = 0; + if (min_period < 10) + min_period = 10; } } @@ -828,7 +839,8 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) /* now set up to the maximum */ DV_SET(offset, spi_max_offset(starget)); - DV_SET(period, spi_min_period(starget)); + DV_SET(period, min_period); + /* try QAS requests; this should be harmless to set if the * target supports it */ if (scsi_device_qas(sdev)) { @@ -837,14 +849,14 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) DV_SET(qas, 0); } - if (scsi_device_ius(sdev) && spi_min_period(starget) < 9) { + if (scsi_device_ius(sdev) && min_period < 9) { /* This u320 (or u640). Set IU transfers */ DV_SET(iu, 1); /* Then set the optional parameters */ DV_SET(rd_strm, 1); DV_SET(wr_flow, 1); DV_SET(rti, 1); - if (spi_min_period(starget) == 8) + if (min_period == 8) DV_SET(pcomp_en, 1); } else { DV_SET(iu, 0); @@ -862,6 +874,10 @@ spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer) } else { DV_SET(dt, 1); } + /* set width last because it will pull all the other + * parameters down to required values */ + DV_SET(width, max_width); + /* Do the read only INQUIRY tests */ spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len, spi_dv_device_compare_inquiry); diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h index a99e45e2b6d..2a6477834c3 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.h +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h @@ -37,6 +37,6 @@ static inline void cpm_set_smc_fcr(volatile smc_uart_t * up) up->smc_tfcr = SMC_EB; } -#define DPRAM_BASE ((unsigned char *)&cpmp->cp_dpmem[0]) +#define DPRAM_BASE ((unsigned char *)cpm_dpram_addr(0)) #endif diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index e348ba68405..ff610c23314 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -38,7 +38,7 @@ #include <asm/prom.h> #include <asm/of_device.h> -#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index 8d7ab74170d..a593f900eff 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -431,6 +431,7 @@ static int w1_uevent(struct device *dev, char **envp, int num_envp, err = add_uevent_var(envp, num_envp, &cur_index, buffer, buffer_size, &cur_len, "W1_SLAVE_ID=%024LX", (unsigned long long)sl->reg_num.id); + envp[cur_index] = NULL; if (err) return err; |