aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/busses/i2c-pxa.c30
-rw-r--r--drivers/net/irda/pxaficp_ir.c24
-rw-r--r--drivers/pcmcia/pxa2xx_cm_x270.c15
-rw-r--r--drivers/pcmcia/pxa2xx_mainstone.c13
-rw-r--r--drivers/pcmcia/pxa2xx_sharpsl.c12
-rw-r--r--drivers/usb/gadget/Kconfig12
-rw-r--r--drivers/usb/gadget/Makefile2
-rw-r--r--drivers/usb/gadget/ether.c2
-rw-r--r--drivers/usb/gadget/gadget_chips.h4
-rw-r--r--drivers/usb/gadget/inode.c2
-rw-r--r--drivers/usb/gadget/pxa25x_udc.c (renamed from drivers/usb/gadget/pxa2xx_udc.c)309
-rw-r--r--drivers/usb/gadget/pxa25x_udc.h (renamed from drivers/usb/gadget/pxa2xx_udc.h)29
-rw-r--r--drivers/usb/gadget/pxa27x_udc.c9
-rw-r--r--drivers/usb/gadget/pxa27x_udc.h8
-rw-r--r--drivers/usb/host/ohci-pxa27x.c3
-rw-r--r--drivers/video/backlight/Kconfig7
-rw-r--r--drivers/video/backlight/Makefile1
-rw-r--r--drivers/video/backlight/pwm_bl.c185
-rw-r--r--drivers/video/pxafb.c44
19 files changed, 453 insertions, 258 deletions
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index eb69fbadc9c..dde6ce963a1 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -39,7 +39,6 @@
#include <asm/io.h>
#include <asm/arch/i2c.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
struct pxa_i2c {
spinlock_t lock;
@@ -945,32 +944,6 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm = {
.functionality = i2c_pxa_functionality,
};
-static void i2c_pxa_enable(struct platform_device *dev)
-{
- if (cpu_is_pxa27x()) {
- switch (dev->id) {
- case 0:
- pxa_gpio_mode(GPIO117_I2CSCL_MD);
- pxa_gpio_mode(GPIO118_I2CSDA_MD);
- break;
- case 1:
- local_irq_disable();
- PCFR |= PCFR_PI2CEN;
- local_irq_enable();
- break;
- }
- }
-}
-
-static void i2c_pxa_disable(struct platform_device *dev)
-{
- if (cpu_is_pxa27x() && dev->id == 1) {
- local_irq_disable();
- PCFR &= ~PCFR_PI2CEN;
- local_irq_enable();
- }
-}
-
#define res_len(r) ((r)->end - (r)->start + 1)
static int i2c_pxa_probe(struct platform_device *dev)
{
@@ -1036,7 +1009,6 @@ static int i2c_pxa_probe(struct platform_device *dev)
#endif
clk_enable(i2c->clk);
- i2c_pxa_enable(dev);
if (plat) {
i2c->adap.class = plat->class;
@@ -1080,7 +1052,6 @@ eadapt:
free_irq(irq, i2c);
ereqirq:
clk_disable(i2c->clk);
- i2c_pxa_disable(dev);
iounmap(i2c->reg_base);
eremap:
clk_put(i2c->clk);
@@ -1103,7 +1074,6 @@ static int __exit i2c_pxa_remove(struct platform_device *dev)
clk_disable(i2c->clk);
clk_put(i2c->clk);
- i2c_pxa_disable(dev);
iounmap(i2c->reg_base);
release_mem_region(i2c->iobase, i2c->iosize);
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index d5c2d27f3ea..f76b0b6c277 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -13,16 +13,8 @@
*
*/
#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/errno.h>
#include <linux/netdevice.h>
-#include <linux/slab.h>
-#include <linux/rtnetlink.h>
-#include <linux/interrupt.h>
-#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
-#include <linux/pm.h>
#include <linux/clk.h>
#include <net/irda/irda.h>
@@ -30,17 +22,9 @@
#include <net/irda/wrapper.h>
#include <net/irda/irda_device.h>
-#include <asm/irq.h>
#include <asm/dma.h>
-#include <asm/delay.h>
-#include <asm/hardware.h>
#include <asm/arch/irda.h>
#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-
-#ifdef CONFIG_MACH_MAINSTONE
-#include <asm/arch/mainstone.h>
-#endif
#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
#define IrSR_RXPL_POS_IS_ZERO 0x0
@@ -163,10 +147,6 @@ static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
/* set board transceiver to SIR mode */
si->pdata->transceiver_mode(si->dev, IR_SIRMODE);
- /* configure GPIO46/47 */
- pxa_gpio_mode(GPIO46_STRXD_MD);
- pxa_gpio_mode(GPIO47_STTXD_MD);
-
/* enable the STUART clock */
pxa_irda_enable_sirclk(si);
}
@@ -201,10 +181,6 @@ static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
/* set board transceiver to FIR mode */
si->pdata->transceiver_mode(si->dev, IR_FIRMODE);
- /* configure GPIO46/47 */
- pxa_gpio_mode(GPIO46_ICPRXD_MD);
- pxa_gpio_mode(GPIO47_ICPTXD_MD);
-
/* enable the FICP clock */
pxa_irda_enable_firclk(si);
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index e7ab060ff11..f123fce65f2 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -18,6 +18,7 @@
#include <pcmcia/ss.h>
#include <asm/hardware.h>
+#include <asm/mach-types.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
@@ -130,7 +131,7 @@ static void cmx270_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
}
-static struct pcmcia_low_level cmx270_pcmcia_ops = {
+static struct pcmcia_low_level cmx270_pcmcia_ops __initdata = {
.owner = THIS_MODULE,
.hw_init = cmx270_pcmcia_hw_init,
.hw_shutdown = cmx270_pcmcia_shutdown,
@@ -147,15 +148,21 @@ static int __init cmx270_pcmcia_init(void)
{
int ret;
+ if (!machine_is_armcore())
+ return -ENODEV;
+
cmx270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
if (!cmx270_pcmcia_device)
return -ENOMEM;
- cmx270_pcmcia_device->dev.platform_data = &cmx270_pcmcia_ops;
+ ret = platform_device_add_data(cmx270_pcmcia_device, &cmx270_pcmcia_ops,
+ sizeof(cmx270_pcmcia_ops));
- printk(KERN_INFO "Registering cm-x270 PCMCIA interface.\n");
- ret = platform_device_add(cmx270_pcmcia_device);
+ if (ret == 0) {
+ printk(KERN_INFO "Registering cm-x270 PCMCIA interface.\n");
+ ret = platform_device_add(cmx270_pcmcia_device);
+ }
if (ret)
platform_device_put(cmx270_pcmcia_device);
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c
index 145b85e0f02..92d1cc33808 100644
--- a/drivers/pcmcia/pxa2xx_mainstone.c
+++ b/drivers/pcmcia/pxa2xx_mainstone.c
@@ -22,6 +22,7 @@
#include <pcmcia/ss.h>
#include <asm/hardware.h>
+#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/arch/pxa-regs.h>
@@ -136,7 +137,7 @@ static void mst_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
}
-static struct pcmcia_low_level mst_pcmcia_ops = {
+static struct pcmcia_low_level mst_pcmcia_ops __initdata = {
.owner = THIS_MODULE,
.hw_init = mst_pcmcia_hw_init,
.hw_shutdown = mst_pcmcia_hw_shutdown,
@@ -153,13 +154,17 @@ static int __init mst_pcmcia_init(void)
{
int ret;
+ if (!machine_is_mainstone())
+ return -ENODEV;
+
mst_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
if (!mst_pcmcia_device)
return -ENOMEM;
- mst_pcmcia_device->dev.platform_data = &mst_pcmcia_ops;
-
- ret = platform_device_add(mst_pcmcia_device);
+ ret = platform_device_add_data(mst_pcmcia_device, &mst_pcmcia_ops,
+ sizeof(mst_pcmcia_ops));
+ if (ret == 0)
+ ret = platform_device_add(mst_pcmcia_device);
if (ret)
platform_device_put(mst_pcmcia_device);
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index d5c33bd78d6..d71f93d4583 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -222,7 +222,7 @@ static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
sharpsl_pcmcia_init_reset(skt);
}
-static struct pcmcia_low_level sharpsl_pcmcia_ops = {
+static struct pcmcia_low_level sharpsl_pcmcia_ops __initdata = {
.owner = THIS_MODULE,
.hw_init = sharpsl_pcmcia_hw_init,
.hw_shutdown = sharpsl_pcmcia_hw_shutdown,
@@ -261,10 +261,12 @@ static int __init sharpsl_pcmcia_init(void)
if (!sharpsl_pcmcia_device)
return -ENOMEM;
- sharpsl_pcmcia_device->dev.platform_data = &sharpsl_pcmcia_ops;
- sharpsl_pcmcia_device->dev.parent = platform_scoop_config->devs[0].dev;
-
- ret = platform_device_add(sharpsl_pcmcia_device);
+ ret = platform_device_add_data(sharpsl_pcmcia_device,
+ &sharpsl_pcmcia_ops, sizeof(sharpsl_pcmcia_ops));
+ if (ret == 0) {
+ sharpsl_pcmcia_device->dev.parent = platform_scoop_config->devs[0].dev;
+ ret = platform_device_add(sharpsl_pcmcia_device);
+ }
if (ret)
platform_device_put(sharpsl_pcmcia_device);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 6e784d2db42..13dcec30457 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -172,7 +172,7 @@ config USB_NET2280
default USB_GADGET
select USB_GADGET_SELECTED
-config USB_GADGET_PXA2XX
+config USB_GADGET_PXA25X
boolean "PXA 25x or IXP 4xx"
depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
help
@@ -184,19 +184,19 @@ config USB_GADGET_PXA2XX
zero (for control transfers).
Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "pxa2xx_udc" and force all
+ dynamically linked module called "pxa25x_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_PXA2XX
+config USB_PXA25X
tristate
- depends on USB_GADGET_PXA2XX
+ depends on USB_GADGET_PXA25X
default USB_GADGET
select USB_GADGET_SELECTED
# if there's only one gadget driver, using only two bulk endpoints,
# don't waste memory for the other endpoints
-config USB_PXA2XX_SMALL
- depends on USB_GADGET_PXA2XX
+config USB_PXA25X_SMALL
+ depends on USB_GADGET_PXA25X
bool
default n if USB_ETH_RNDIS
default y if USB_ZERO
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 12357255d74..e258afd25fa 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -8,7 +8,7 @@ endif
obj-$(CONFIG_USB_DUMMY_HCD) += dummy_hcd.o
obj-$(CONFIG_USB_NET2280) += net2280.o
obj-$(CONFIG_USB_AMD5536UDC) += amd5536udc.o
-obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o
+obj-$(CONFIG_USB_PXA25X) += pxa25x_udc.o
obj-$(CONFIG_USB_PXA27X) += pxa27x_udc.o
obj-$(CONFIG_USB_GOKU) += goku_udc.o
obj-$(CONFIG_USB_OMAP) += omap_udc.o
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 8d61ea67a81..4ce3950b997 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -262,7 +262,7 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
/* For CDC-incapable hardware, choose the simple cdc subset.
* Anything that talks bulk (without notable bugs) can do this.
*/
-#ifdef CONFIG_USB_GADGET_PXA2XX
+#ifdef CONFIG_USB_GADGET_PXA25X
#define DEV_CONFIG_SUBSET
#endif
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index f7f159c1002..ca5149ea731 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -29,8 +29,8 @@
#define gadget_is_dummy(g) 0
#endif
-#ifdef CONFIG_USB_GADGET_PXA2XX
-#define gadget_is_pxa(g) !strcmp("pxa2xx_udc", (g)->name)
+#ifdef CONFIG_USB_GADGET_PXA25X
+#define gadget_is_pxa(g) !strcmp("pxa25x_udc", (g)->name)
#else
#define gadget_is_pxa(g) 0
#endif
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 69b0a2754f2..f132a9219e1 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1501,7 +1501,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
}
break;
-#ifndef CONFIG_USB_GADGET_PXA2XX
+#ifndef CONFIG_USB_GADGET_PXA25X
/* PXA automagically handles this request too */
case USB_REQ_GET_CONFIGURATION:
if (ctrl->bRequestType != 0x80)
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 08f699b1fc5..031dceb9302 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -1,5 +1,4 @@
/*
- * linux/drivers/usb/gadget/pxa2xx_udc.c
* Intel PXA25x and IXP4xx on-chip full speed USB device controllers
*
* Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
@@ -46,19 +45,25 @@
#include <linux/err.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
+#include <linux/io.h>
#include <asm/byteorder.h>
#include <asm/dma.h>
#include <asm/gpio.h>
-#include <asm/io.h>
#include <asm/system.h>
#include <asm/mach-types.h>
#include <asm/unaligned.h>
-#include <asm/hardware.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+/*
+ * This driver is PXA25x only. Grab the right register definitions.
+ */
+#ifdef CONFIG_ARCH_PXA
+#include <asm/arch/pxa25x-udc.h>
+#endif
+
#include <asm/mach/udc_pxa2xx.h>
@@ -91,7 +96,7 @@
#define DRIVER_DESC "PXA 25x USB Device Controller driver"
-static const char driver_name [] = "pxa2xx_udc";
+static const char driver_name [] = "pxa25x_udc";
static const char ep0name [] = "ep0";
@@ -111,10 +116,10 @@ static const char ep0name [] = "ep0";
#endif
-#include "pxa2xx_udc.h"
+#include "pxa25x_udc.h"
-#ifdef CONFIG_USB_PXA2XX_SMALL
+#ifdef CONFIG_USB_PXA25X_SMALL
#define SIZE_STR " (small)"
#else
#define SIZE_STR ""
@@ -126,8 +131,8 @@ static const char ep0name [] = "ep0";
* ---------------------------------------------------------------------------
*/
-static void pxa2xx_ep_fifo_flush (struct usb_ep *ep);
-static void nuke (struct pxa2xx_ep *, int status);
+static void pxa25x_ep_fifo_flush (struct usb_ep *ep);
+static void nuke (struct pxa25x_ep *, int status);
/* one GPIO should be used to detect VBUS from the host */
static int is_vbus_present(void)
@@ -212,24 +217,24 @@ static inline void udc_ack_int_UDCCR(int mask)
/*
* endpoint enable/disable
*
- * we need to verify the descriptors used to enable endpoints. since pxa2xx
+ * we need to verify the descriptors used to enable endpoints. since pxa25x
* endpoint configurations are fixed, and are pretty much always enabled,
* there's not a lot to manage here.
*
- * because pxa2xx can't selectively initialize bulk (or interrupt) endpoints,
+ * because pxa25x can't selectively initialize bulk (or interrupt) endpoints,
* (resetting endpoint halt and toggle), SET_INTERFACE is unusable except
* for a single interface (with only the default altsetting) and for gadget
* drivers that don't halt endpoints (not reset by set_interface). that also
* means that if you use ISO, you must violate the USB spec rule that all
* iso endpoints must be in non-default altsettings.
*/
-static int pxa2xx_ep_enable (struct usb_ep *_ep,
+static int pxa25x_ep_enable (struct usb_ep *_ep,
const struct usb_endpoint_descriptor *desc)
{
- struct pxa2xx_ep *ep;
- struct pxa2xx_udc *dev;
+ struct pxa25x_ep *ep;
+ struct pxa25x_udc *dev;
- ep = container_of (_ep, struct pxa2xx_ep, ep);
+ ep = container_of (_ep, struct pxa25x_ep, ep);
if (!_ep || !desc || ep->desc || _ep->name == ep0name
|| desc->bDescriptorType != USB_DT_ENDPOINT
|| ep->bEndpointAddress != desc->bEndpointAddress
@@ -268,7 +273,7 @@ static int pxa2xx_ep_enable (struct usb_ep *_ep,
ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize);
/* flush fifo (mostly for OUT buffers) */
- pxa2xx_ep_fifo_flush (_ep);
+ pxa25x_ep_fifo_flush (_ep);
/* ... reset halt state too, if we could ... */
@@ -276,12 +281,12 @@ static int pxa2xx_ep_enable (struct usb_ep *_ep,
return 0;
}
-static int pxa2xx_ep_disable (struct usb_ep *_ep)
+static int pxa25x_ep_disable (struct usb_ep *_ep)
{
- struct pxa2xx_ep *ep;
+ struct pxa25x_ep *ep;
unsigned long flags;
- ep = container_of (_ep, struct pxa2xx_ep, ep);
+ ep = container_of (_ep, struct pxa25x_ep, ep);
if (!_ep || !ep->desc) {
DMSG("%s, %s not enabled\n", __func__,
_ep ? ep->ep.name : NULL);
@@ -292,7 +297,7 @@ static int pxa2xx_ep_disable (struct usb_ep *_ep)
nuke (ep, -ESHUTDOWN);
/* flush fifo (mostly for IN buffers) */
- pxa2xx_ep_fifo_flush (_ep);
+ pxa25x_ep_fifo_flush (_ep);
ep->desc = NULL;
ep->stopped = 1;
@@ -304,18 +309,18 @@ static int pxa2xx_ep_disable (struct usb_ep *_ep)
/*-------------------------------------------------------------------------*/
-/* for the pxa2xx, these can just wrap kmalloc/kfree. gadget drivers
+/* for the pxa25x, these can just wrap kmalloc/kfree. gadget drivers
* must still pass correctly initialized endpoints, since other controller
* drivers may care about how it's currently set up (dma issues etc).
*/
/*
- * pxa2xx_ep_alloc_request - allocate a request data structure
+ * pxa25x_ep_alloc_request - allocate a request data structure
*/
static struct usb_request *
-pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
+pxa25x_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
{
- struct pxa2xx_request *req;
+ struct pxa25x_request *req;
req = kzalloc(sizeof(*req), gfp_flags);
if (!req)
@@ -327,14 +332,14 @@ pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
/*
- * pxa2xx_ep_free_request - deallocate a request data structure
+ * pxa25x_ep_free_request - deallocate a request data structure
*/
static void
-pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
+pxa25x_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
{
- struct pxa2xx_request *req;
+ struct pxa25x_request *req;
- req = container_of (_req, struct pxa2xx_request, req);
+ req = container_of (_req, struct pxa25x_request, req);
WARN_ON (!list_empty (&req->queue));
kfree(req);
}
@@ -344,7 +349,7 @@ pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
/*
* done - retire a request; caller blocked irqs
*/
-static void done(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int status)
+static void done(struct pxa25x_ep *ep, struct pxa25x_request *req, int status)
{
unsigned stopped = ep->stopped;
@@ -367,13 +372,13 @@ static void done(struct pxa2xx_ep *ep, struct pxa2xx_request *req, int status)
}
-static inline void ep0_idle (struct pxa2xx_udc *dev)
+static inline void ep0_idle (struct pxa25x_udc *dev)
{
dev->ep0state = EP0_IDLE;
}
static int
-write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max)
+write_packet(volatile u32 *uddr, struct pxa25x_request *req, unsigned max)
{
u8 *buf;
unsigned length, count;
@@ -398,7 +403,7 @@ write_packet(volatile u32 *uddr, struct pxa2xx_request *req, unsigned max)
* caller guarantees at least one packet buffer is ready (or a zlp).
*/
static int
-write_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
+write_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
{
unsigned max;
@@ -455,7 +460,7 @@ write_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
* ep0 data stage. these chips want very simple state transitions.
*/
static inline
-void ep0start(struct pxa2xx_udc *dev, u32 flags, const char *tag)
+void ep0start(struct pxa25x_udc *dev, u32 flags, const char *tag)
{
UDCCS0 = flags|UDCCS0_SA|UDCCS0_OPR;
USIR0 = USIR0_IR0;
@@ -465,7 +470,7 @@ void ep0start(struct pxa2xx_udc *dev, u32 flags, const char *tag)
}
static int
-write_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
+write_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
{
unsigned count;
int is_short;
@@ -525,7 +530,7 @@ write_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
* request buffer having filled (and maybe overran till end-of-packet).
*/
static int
-read_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
+read_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
{
for (;;) {
u32 udccs;
@@ -602,7 +607,7 @@ read_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
* protocols do use them.
*/
static int
-read_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
+read_ep0_fifo (struct pxa25x_ep *ep, struct pxa25x_request *req)
{
u8 *buf, byte;
unsigned bufferspace;
@@ -641,21 +646,21 @@ read_ep0_fifo (struct pxa2xx_ep *ep, struct pxa2xx_request *req)
/*-------------------------------------------------------------------------*/
static int
-pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+pxa25x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
{
- struct pxa2xx_request *req;
- struct pxa2xx_ep *ep;
- struct pxa2xx_udc *dev;
+ struct pxa25x_request *req;
+ struct pxa25x_ep *ep;
+ struct pxa25x_udc *dev;
unsigned long flags;
- req = container_of(_req, struct pxa2xx_request, req);
+ req = container_of(_req, struct pxa25x_request, req);
if (unlikely (!_req || !_req->complete || !_req->buf
|| !list_empty(&req->queue))) {
DMSG("%s, bad params\n", __func__);
return -EINVAL;
}
- ep = container_of(_ep, struct pxa2xx_ep, ep);
+ ep = container_of(_ep, struct pxa25x_ep, ep);
if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) {
DMSG("%s, bad ep\n", __func__);
return -EINVAL;
@@ -751,14 +756,14 @@ pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
/*
* nuke - dequeue ALL requests
*/
-static void nuke(struct pxa2xx_ep *ep, int status)
+static void nuke(struct pxa25x_ep *ep, int status)
{
- struct pxa2xx_request *req;
+ struct pxa25x_request *req;
/* called with irqs blocked */
while (!list_empty(&ep->queue)) {
req = list_entry(ep->queue.next,
- struct pxa2xx_request,
+ struct pxa25x_request,
queue);
done(ep, req, status);
}
@@ -768,13 +773,13 @@ static void nuke(struct pxa2xx_ep *ep, int status)
/* dequeue JUST ONE request */
-static int pxa2xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+static int pxa25x_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
{
- struct pxa2xx_ep *ep;
- struct pxa2xx_request *req;
+ struct pxa25x_ep *ep;
+ struct pxa25x_request *req;
unsigned long flags;
- ep = container_of(_ep, struct pxa2xx_ep, ep);
+ ep = container_of(_ep, struct pxa25x_ep, ep);
if (!_ep || ep->ep.name == ep0name)
return -EINVAL;
@@ -798,12 +803,12 @@ static int pxa2xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
/*-------------------------------------------------------------------------*/
-static int pxa2xx_ep_set_halt(struct usb_ep *_ep, int value)
+static int pxa25x_ep_set_halt(struct usb_ep *_ep, int value)
{
- struct pxa2xx_ep *ep;
+ struct pxa25x_ep *ep;
unsigned long flags;
- ep = container_of(_ep, struct pxa2xx_ep, ep);
+ ep = container_of(_ep, struct pxa25x_ep, ep);
if (unlikely (!_ep
|| (!ep->desc && ep->ep.name != ep0name))
|| ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
@@ -853,11 +858,11 @@ static int pxa2xx_ep_set_halt(struct usb_ep *_ep, int value)
return 0;
}
-static int pxa2xx_ep_fifo_status(struct usb_ep *_ep)
+static int pxa25x_ep_fifo_status(struct usb_ep *_ep)
{
- struct pxa2xx_ep *ep;
+ struct pxa25x_ep *ep;
- ep = container_of(_ep, struct pxa2xx_ep, ep);
+ ep = container_of(_ep, struct pxa25x_ep, ep);
if (!_ep) {
DMSG("%s, bad ep\n", __func__);
return -ENODEV;
@@ -872,11 +877,11 @@ static int pxa2xx_ep_fifo_status(struct usb_ep *_ep)
return (*ep->reg_ubcr & 0xfff) + 1;
}
-static void pxa2xx_ep_fifo_flush(struct usb_ep *_ep)
+static void pxa25x_ep_fifo_flush(struct usb_ep *_ep)
{
- struct pxa2xx_ep *ep;
+ struct pxa25x_ep *ep;
- ep = container_of(_ep, struct pxa2xx_ep, ep);
+ ep = container_of(_ep, struct pxa25x_ep, ep);
if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) {
DMSG("%s, bad ep\n", __func__);
return;
@@ -898,19 +903,19 @@ static void pxa2xx_ep_fifo_flush(struct usb_ep *_ep)
}
-static struct usb_ep_ops pxa2xx_ep_ops = {
- .enable = pxa2xx_ep_enable,
- .disable = pxa2xx_ep_disable,
+static struct usb_ep_ops pxa25x_ep_ops = {
+ .enable = pxa25x_ep_enable,
+ .disable = pxa25x_ep_disable,
- .alloc_request = pxa2xx_ep_alloc_request,
- .free_request = pxa2xx_ep_free_request,
+ .alloc_request = pxa25x_ep_alloc_request,
+ .free_request = pxa25x_ep_free_request,
- .queue = pxa2xx_ep_queue,
- .dequeue = pxa2xx_ep_dequeue,
+ .queue = pxa25x_ep_queue,
+ .dequeue = pxa25x_ep_dequeue,
- .set_halt = pxa2xx_ep_set_halt,
- .fifo_status = pxa2xx_ep_fifo_status,
- .fifo_flush = pxa2xx_ep_fifo_flush,
+ .set_halt = pxa25x_ep_set_halt,
+ .fifo_status = pxa25x_ep_fifo_status,
+ .fifo_flush = pxa25x_ep_fifo_flush,
};
@@ -919,12 +924,12 @@ static struct usb_ep_ops pxa2xx_ep_ops = {
* ---------------------------------------------------------------------------
*/
-static int pxa2xx_udc_get_frame(struct usb_gadget *_gadget)
+static int pxa25x_udc_get_frame(struct usb_gadget *_gadget)
{
return ((UFNRH & 0x07) << 8) | (UFNRL & 0xff);
}
-static int pxa2xx_udc_wakeup(struct usb_gadget *_gadget)
+static int pxa25x_udc_wakeup(struct usb_gadget *_gadget)
{
/* host may not have enabled remote wakeup */
if ((UDCCS0 & UDCCS0_DRWF) == 0)
@@ -933,14 +938,14 @@ static int pxa2xx_udc_wakeup(struct usb_gadget *_gadget)
return 0;
}
-static void stop_activity(struct pxa2xx_udc *, struct usb_gadget_driver *);
-static void udc_enable (struct pxa2xx_udc *);
-static void udc_disable(struct pxa2xx_udc *);
+static void stop_activity(struct pxa25x_udc *, struct usb_gadget_driver *);
+static void udc_enable (struct pxa25x_udc *);
+static void udc_disable(struct pxa25x_udc *);
/* We disable the UDC -- and its 48 MHz clock -- whenever it's not
* in active use.
*/
-static int pullup(struct pxa2xx_udc *udc)
+static int pullup(struct pxa25x_udc *udc)
{
int is_active = udc->vbus && udc->pullup && !udc->suspended;
DMSG("%s\n", is_active ? "active" : "inactive");
@@ -970,11 +975,11 @@ static int pullup(struct pxa2xx_udc *udc)
}
/* VBUS reporting logically comes from a transceiver */
-static int pxa2xx_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
+static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
{
- struct pxa2xx_udc *udc;
+ struct pxa25x_udc *udc;
- udc = container_of(_gadget, struct pxa2xx_udc, gadget);
+ udc = container_of(_gadget, struct pxa25x_udc, gadget);
udc->vbus = (is_active != 0);
DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
pullup(udc);
@@ -982,11 +987,11 @@ static int pxa2xx_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
}
/* drivers may have software control over D+ pullup */
-static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active)
+static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active)
{
- struct pxa2xx_udc *udc;
+ struct pxa25x_udc *udc;
- udc = container_of(_gadget, struct pxa2xx_udc, gadget);
+ udc = container_of(_gadget, struct pxa25x_udc, gadget);
/* not all boards support pullup control */
if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
@@ -997,11 +1002,11 @@ static int pxa2xx_udc_pullup(struct usb_gadget *_gadget, int is_active)
return 0;
}
-static const struct usb_gadget_ops pxa2xx_udc_ops = {
- .get_frame = pxa2xx_udc_get_frame,
- .wakeup = pxa2xx_udc_wakeup,
- .vbus_session = pxa2xx_udc_vbus_session,
- .pullup = pxa2xx_udc_pullup,
+static const struct usb_gadget_ops pxa25x_udc_ops = {
+ .get_frame = pxa25x_udc_get_frame,
+ .wakeup = pxa25x_udc_wakeup,
+ .vbus_session = pxa25x_udc_vbus_session,
+ .pullup = pxa25x_udc_pullup,
// .vbus_draw ... boards may consume current from VBUS, up to
// 100-500mA based on config. the 500uA suspend ceiling means
@@ -1015,7 +1020,7 @@ static const struct usb_gadget_ops pxa2xx_udc_ops = {
static int
udc_seq_show(struct seq_file *m, void *_d)
{
- struct pxa2xx_udc *dev = m->private;
+ struct pxa25x_udc *dev = m->private;
unsigned long flags;
int i;
u32 tmp;
@@ -1076,8 +1081,8 @@ udc_seq_show(struct seq_file *m, void *_d)
/* dump endpoint queues */
for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
- struct pxa2xx_ep *ep = &dev->ep [i];
- struct pxa2xx_request *req;
+ struct pxa25x_ep *ep = &dev->ep [i];
+ struct pxa25x_request *req;
if (i != 0) {
const struct usb_endpoint_descriptor *desc;
@@ -1150,7 +1155,7 @@ static const struct file_operations debug_fops = {
/*
* udc_disable - disable USB device controller
*/
-static void udc_disable(struct pxa2xx_udc *dev)
+static void udc_disable(struct pxa25x_udc *dev)
{
/* block all irqs */
udc_set_mask_UDCCR(UDCCR_SRM|UDCCR_REM);
@@ -1170,7 +1175,7 @@ static void udc_disable(struct pxa2xx_udc *dev)
/*
* udc_reinit - initialize software state
*/
-static void udc_reinit(struct pxa2xx_udc *dev)
+static void udc_reinit(struct pxa25x_udc *dev)
{
u32 i;
@@ -1181,7 +1186,7 @@ static void udc_reinit(struct pxa2xx_udc *dev)
/* basic endpoint records init */
for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
- struct pxa2xx_ep *ep = &dev->ep[i];
+ struct pxa25x_ep *ep = &dev->ep[i];
if (i != 0)
list_add_tail (&ep->ep.ep_list, &dev->gadget.ep_list);
@@ -1198,7 +1203,7 @@ static void udc_reinit(struct pxa2xx_udc *dev)
/* until it's enabled, this UDC should be completely invisible
* to any USB host.
*/
-static void udc_enable (struct pxa2xx_udc *dev)
+static void udc_enable (struct pxa25x_udc *dev)
{
udc_clear_mask_UDCCR(UDCCR_UDE);
@@ -1254,7 +1259,7 @@ static void udc_enable (struct pxa2xx_udc *dev)
*/
int usb_gadget_register_driver(struct usb_gadget_driver *driver)
{
- struct pxa2xx_udc *dev = the_controller;
+ struct pxa25x_udc *dev = the_controller;
int retval;
if (!driver
@@ -1299,7 +1304,7 @@ fail:
EXPORT_SYMBOL(usb_gadget_register_driver);
static void
-stop_activity(struct pxa2xx_udc *dev, struct usb_gadget_driver *driver)
+stop_activity(struct pxa25x_udc *dev, struct usb_gadget_driver *driver)
{
int i;
@@ -1310,7 +1315,7 @@ stop_activity(struct pxa2xx_udc *dev, struct usb_gadget_driver *driver)
/* prevent new request submissions, kill any outstanding requests */
for (i = 0; i < PXA_UDC_NUM_ENDPOINTS; i++) {
- struct pxa2xx_ep *ep = &dev->ep[i];
+ struct pxa25x_ep *ep = &dev->ep[i];
ep->stopped = 1;
nuke(ep, -ESHUTDOWN);
@@ -1327,7 +1332,7 @@ stop_activity(struct pxa2xx_udc *dev, struct usb_gadget_driver *driver)
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
{
- struct pxa2xx_udc *dev = the_controller;
+ struct pxa25x_udc *dev = the_controller;
if (!dev)
return -ENODEV;
@@ -1364,7 +1369,7 @@ EXPORT_SYMBOL(usb_gadget_unregister_driver);
static irqreturn_t
lubbock_vbus_irq(int irq, void *_dev)
{
- struct pxa2xx_udc *dev = _dev;
+ struct pxa25x_udc *dev = _dev;
int vbus;
dev->stats.irqs++;
@@ -1383,7 +1388,7 @@ lubbock_vbus_irq(int irq, void *_dev)
return IRQ_NONE;
}
- pxa2xx_udc_vbus_session(&dev->gadget, vbus);
+ pxa25x_udc_vbus_session(&dev->gadget, vbus);
return IRQ_HANDLED;
}
@@ -1391,20 +1396,20 @@ lubbock_vbus_irq(int irq, void *_dev)
static irqreturn_t udc_vbus_irq(int irq, void *_dev)
{
- struct pxa2xx_udc *dev = _dev;
+ struct pxa25x_udc *dev = _dev;
int vbus = gpio_get_value(dev->mach->gpio_vbus);
if (dev->mach->gpio_vbus_inverted)
vbus = !vbus;
- pxa2xx_udc_vbus_session(&dev->gadget, vbus);
+ pxa25x_udc_vbus_session(&dev->gadget, vbus);
return IRQ_HANDLED;
}
/*-------------------------------------------------------------------------*/
-static inline void clear_ep_state (struct pxa2xx_udc *dev)
+static inline void clear_ep_state (struct pxa25x_udc *dev)
{
unsigned i;
@@ -1417,7 +1422,7 @@ static inline void clear_ep_state (struct pxa2xx_udc *dev)
static void udc_watchdog(unsigned long _dev)
{
- struct pxa2xx_udc *dev = (void *)_dev;
+ struct pxa25x_udc *dev = (void *)_dev;
local_irq_disable();
if (dev->ep0state == EP0_STALL
@@ -1430,11 +1435,11 @@ static void udc_watchdog(unsigned long _dev)
local_irq_enable();
}
-static void handle_ep0 (struct pxa2xx_udc *dev)
+static void handle_ep0 (struct pxa25x_udc *dev)
{
u32 udccs0 = UDCCS0;
- struct pxa2xx_ep *ep = &dev->ep [0];
- struct pxa2xx_request *req;
+ struct pxa25x_ep *ep = &dev->ep [0];
+ struct pxa25x_request *req;
union {
struct usb_ctrlrequest r;
u8 raw [8];
@@ -1444,7 +1449,7 @@ static void handle_ep0 (struct pxa2xx_udc *dev)
if (list_empty(&ep->queue))
req = NULL;
else
- req = list_entry(ep->queue.next, struct pxa2xx_request, queue);
+ req = list_entry(ep->queue.next, struct pxa25x_request, queue);
/* clear stall status */
if (udccs0 & UDCCS0_SST) {
@@ -1654,9 +1659,9 @@ stall:
USIR0 = USIR0_IR0;
}
-static void handle_ep(struct pxa2xx_ep *ep)
+static void handle_ep(struct pxa25x_ep *ep)
{
- struct pxa2xx_request *req;
+ struct pxa25x_request *req;
int is_in = ep->bEndpointAddress & USB_DIR_IN;
int completed;
u32 udccs, tmp;
@@ -1665,7 +1670,7 @@ static void handle_ep(struct pxa2xx_ep *ep)
completed = 0;
if (likely (!list_empty(&ep->queue)))
req = list_entry(ep->queue.next,
- struct pxa2xx_request, queue);
+ struct pxa25x_request, queue);
else
req = NULL;
@@ -1702,16 +1707,16 @@ static void handle_ep(struct pxa2xx_ep *ep)
}
/*
- * pxa2xx_udc_irq - interrupt handler
+ * pxa25x_udc_irq - interrupt handler
*
* avoid delays in ep0 processing. the control handshaking isn't always
* under software control (pxa250c0 and the pxa255 are better), and delays
* could cause usb protocol errors.
*/
static irqreturn_t
-pxa2xx_udc_irq(int irq, void *_dev)
+pxa25x_udc_irq(int irq, void *_dev)
{
- struct pxa2xx_udc *dev = _dev;
+ struct pxa25x_udc *dev = _dev;
int handled;
dev->stats.irqs++;
@@ -1820,9 +1825,9 @@ static void nop_release (struct device *dev)
* doing it at run-time) to save code, eliminate fault paths, and
* be more obviously correct.
*/
-static struct pxa2xx_udc memory = {
+static struct pxa25x_udc memory = {
.gadget = {
- .ops = &pxa2xx_udc_ops,
+ .ops = &pxa25x_udc_ops,
.ep0 = &memory.ep[0].ep,
.name = driver_name,
.dev = {
@@ -1835,7 +1840,7 @@ static struct pxa2xx_udc memory = {
.ep[0] = {
.ep = {
.name = ep0name,
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = EP0_FIFO_SIZE,
},
.dev = &memory,
@@ -1847,7 +1852,7 @@ static struct pxa2xx_udc memory = {
.ep[1] = {
.ep = {
.name = "ep1in-bulk",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
},
.dev = &memory,
@@ -1860,7 +1865,7 @@ static struct pxa2xx_udc memory = {
.ep[2] = {
.ep = {
.name = "ep2out-bulk",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
},
.dev = &memory,
@@ -1871,11 +1876,11 @@ static struct pxa2xx_udc memory = {
.reg_ubcr = &UBCR2,
.reg_uddr = &UDDR2,
},
-#ifndef CONFIG_USB_PXA2XX_SMALL
+#ifndef CONFIG_USB_PXA25X_SMALL
.ep[3] = {
.ep = {
.name = "ep3in-iso",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
},
.dev = &memory,
@@ -1888,7 +1893,7 @@ static struct pxa2xx_udc memory = {
.ep[4] = {
.ep = {
.name = "ep4out-iso",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
},
.dev = &memory,
@@ -1902,7 +1907,7 @@ static struct pxa2xx_udc memory = {
.ep[5] = {
.ep = {
.name = "ep5in-int",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = INT_FIFO_SIZE,
},
.dev = &memory,
@@ -1917,7 +1922,7 @@ static struct pxa2xx_udc memory = {
.ep[6] = {
.ep = {
.name = "ep6in-bulk",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
},
.dev = &memory,
@@ -1930,7 +1935,7 @@ static struct pxa2xx_udc memory = {
.ep[7] = {
.ep = {
.name = "ep7out-bulk",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
},
.dev = &memory,
@@ -1944,7 +1949,7 @@ static struct pxa2xx_udc memory = {
.ep[8] = {
.ep = {
.name = "ep8in-iso",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
},
.dev = &memory,
@@ -1957,7 +1962,7 @@ static struct pxa2xx_udc memory = {
.ep[9] = {
.ep = {
.name = "ep9out-iso",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
},
.dev = &memory,
@@ -1971,7 +1976,7 @@ static struct pxa2xx_udc memory = {
.ep[10] = {
.ep = {
.name = "ep10in-int",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = INT_FIFO_SIZE,
},
.dev = &memory,
@@ -1986,7 +1991,7 @@ static struct pxa2xx_udc memory = {
.ep[11] = {
.ep = {
.name = "ep11in-bulk",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
},
.dev = &memory,
@@ -1999,7 +2004,7 @@ static struct pxa2xx_udc memory = {
.ep[12] = {
.ep = {
.name = "ep12out-bulk",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = BULK_FIFO_SIZE,
},
.dev = &memory,
@@ -2013,7 +2018,7 @@ static struct pxa2xx_udc memory = {
.ep[13] = {
.ep = {
.name = "ep13in-iso",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
},
.dev = &memory,
@@ -2026,7 +2031,7 @@ static struct pxa2xx_udc memory = {
.ep[14] = {
.ep = {
.name = "ep14out-iso",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = ISO_FIFO_SIZE,
},
.dev = &memory,
@@ -2040,7 +2045,7 @@ static struct pxa2xx_udc memory = {
.ep[15] = {
.ep = {
.name = "ep15in-int",
- .ops = &pxa2xx_ep_ops,
+ .ops = &pxa25x_ep_ops,
.maxpacket = INT_FIFO_SIZE,
},
.dev = &memory,
@@ -2050,7 +2055,7 @@ static struct pxa2xx_udc memory = {
.reg_udccs = &UDCCS15,
.reg_uddr = &UDDR15,
},
-#endif /* !CONFIG_USB_PXA2XX_SMALL */
+#endif /* !CONFIG_USB_PXA25X_SMALL */
};
#define CP15R0_VENDOR_MASK 0xffffe000
@@ -2090,9 +2095,9 @@ static struct pxa2xx_udc memory = {
/*
* probe - binds to the platform device
*/
-static int __init pxa2xx_udc_probe(struct platform_device *pdev)
+static int __init pxa25x_udc_probe(struct platform_device *pdev)
{
- struct pxa2xx_udc *dev = &memory;
+ struct pxa25x_udc *dev = &memory;
int retval, vbus_irq, irq;
u32 chiprev;
@@ -2155,7 +2160,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
if (dev->mach->gpio_vbus) {
if ((retval = gpio_request(dev->mach->gpio_vbus,
- "pxa2xx_udc GPIO VBUS"))) {
+ "pxa25x_udc GPIO VBUS"))) {
dev_dbg(&pdev->dev,
"can't get vbus gpio %d, err: %d\n",
dev->mach->gpio_vbus, retval);
@@ -2168,7 +2173,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
if (dev->mach->gpio_pullup) {
if ((retval = gpio_request(dev->mach->gpio_pullup,
- "pca2xx_udc GPIO PULLUP"))) {
+ "pca25x_udc GPIO PULLUP"))) {
dev_dbg(&pdev->dev,
"can't get pullup gpio %d, err: %d\n",
dev->mach->gpio_pullup, retval);
@@ -2194,7 +2199,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
dev->vbus = is_vbus_present();
/* irq setup after old hardware state is cleaned up */
- retval = request_irq(irq, pxa2xx_udc_irq,
+ retval = request_irq(irq, pxa25x_udc_irq,
IRQF_DISABLED, driver_name, dev);
if (retval != 0) {
pr_err("%s: can't get irq %d, err %d\n",
@@ -2260,14 +2265,14 @@ lubbock_fail0:
return retval;
}
-static void pxa2xx_udc_shutdown(struct platform_device *_dev)
+static void pxa25x_udc_shutdown(struct platform_device *_dev)
{
pullup_off();
}
-static int __exit pxa2xx_udc_remove(struct platform_device *pdev)
+static int __exit pxa25x_udc_remove(struct platform_device *pdev)
{
- struct pxa2xx_udc *dev = platform_get_drvdata(pdev);
+ struct pxa25x_udc *dev = platform_get_drvdata(pdev);
if (dev->driver)
return -EBUSY;
@@ -2317,9 +2322,9 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev)
* VBUS IRQs should probably be ignored so that the PXA device just acts
* "dead" to USB hosts until system resume.
*/
-static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state)
+static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state)
{
- struct pxa2xx_udc *udc = platform_get_drvdata(dev);
+ struct pxa25x_udc *udc = platform_get_drvdata(dev);
unsigned long flags;
if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
@@ -2333,9 +2338,9 @@ static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state)
return 0;
}
-static int pxa2xx_udc_resume(struct platform_device *dev)
+static int pxa25x_udc_resume(struct platform_device *dev)
{
- struct pxa2xx_udc *udc = platform_get_drvdata(dev);
+ struct pxa25x_udc *udc = platform_get_drvdata(dev);
unsigned long flags;
udc->suspended = 0;
@@ -2347,27 +2352,27 @@ static int pxa2xx_udc_resume(struct platform_device *dev)
}
#else
-#define pxa2xx_udc_suspend NULL
-#define pxa2xx_udc_resume NULL
+#define pxa25x_udc_suspend NULL
+#define pxa25x_udc_resume NULL
#endif
/*-------------------------------------------------------------------------*/
static struct platform_driver udc_driver = {
- .shutdown = pxa2xx_udc_shutdown,
- .remove = __exit_p(pxa2xx_udc_remove),
- .suspend = pxa2xx_udc_suspend,
- .resume = pxa2xx_udc_resume,
+ .shutdown = pxa25x_udc_shutdown,
+ .remove = __exit_p(pxa25x_udc_remove),
+ .suspend = pxa25x_udc_suspend,
+ .resume = pxa25x_udc_resume,
.driver = {
.owner = THIS_MODULE,
- .name = "pxa2xx-udc",
+ .name = "pxa25x-udc",
},
};
static int __init udc_init(void)
{
pr_info("%s: version %s\n", driver_name, DRIVER_VERSION);
- return platform_driver_probe(&udc_driver, pxa2xx_udc_probe);
+ return platform_driver_probe(&udc_driver, pxa25x_udc_probe);
}
module_init(udc_init);
@@ -2380,4 +2385,4 @@ module_exit(udc_exit);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:pxa2xx-udc");
+MODULE_ALIAS("platform:pxa25x-udc");
diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa25x_udc.h
index e2c19e88c87..4d11ece7c95 100644
--- a/drivers/usb/gadget/pxa2xx_udc.h
+++ b/drivers/usb/gadget/pxa25x_udc.h
@@ -1,6 +1,5 @@
/*
- * linux/drivers/usb/gadget/pxa2xx_udc.h
- * Intel PXA2xx on-chip full speed USB device controller
+ * Intel PXA25x on-chip full speed USB device controller
*
* Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
* Copyright (C) 2003 David Brownell
@@ -21,14 +20,14 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef __LINUX_USB_GADGET_PXA2XX_H
-#define __LINUX_USB_GADGET_PXA2XX_H
+#ifndef __LINUX_USB_GADGET_PXA25X_H
+#define __LINUX_USB_GADGET_PXA25X_H
#include <linux/types.h>
/*-------------------------------------------------------------------------*/
-/* pxa2xx has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */
+/* pxa25x has this (move to include/asm-arm/arch-pxa/pxa-regs.h) */
#define UFNRH_SIR (1 << 7) /* SOF interrupt request */
#define UFNRH_SIM (1 << 6) /* SOF interrupt mask */
#define UFNRH_IPE14 (1 << 5) /* ISO packet error, ep14 */
@@ -45,11 +44,11 @@
/*-------------------------------------------------------------------------*/
-struct pxa2xx_udc;
+struct pxa25x_udc;
-struct pxa2xx_ep {
+struct pxa25x_ep {
struct usb_ep ep;
- struct pxa2xx_udc *dev;
+ struct pxa25x_udc *dev;
const struct usb_endpoint_descriptor *desc;
struct list_head queue;
@@ -72,7 +71,7 @@ struct pxa2xx_ep {
volatile u32 *reg_uddr;
};
-struct pxa2xx_request {
+struct pxa25x_request {
struct usb_request req;
struct list_head queue;
};
@@ -98,7 +97,7 @@ struct udc_stats {
unsigned long irqs;
};
-#ifdef CONFIG_USB_PXA2XX_SMALL
+#ifdef CONFIG_USB_PXA25X_SMALL
/* when memory's tight, SMALL config saves code+data. */
#define PXA_UDC_NUM_ENDPOINTS 3
#endif
@@ -107,7 +106,7 @@ struct udc_stats {
#define PXA_UDC_NUM_ENDPOINTS 16
#endif
-struct pxa2xx_udc {
+struct pxa25x_udc {
struct usb_gadget gadget;
struct usb_gadget_driver *driver;
@@ -130,7 +129,7 @@ struct pxa2xx_udc {
struct clk *clk;
struct pxa2xx_udc_mach_info *mach;
u64 dma_mask;
- struct pxa2xx_ep ep [PXA_UDC_NUM_ENDPOINTS];
+ struct pxa25x_ep ep [PXA_UDC_NUM_ENDPOINTS];
#ifdef CONFIG_USB_GADGET_DEBUG_FS
struct dentry *debugfs_udc;
@@ -144,7 +143,7 @@ struct pxa2xx_udc {
/* lubbock can also report usb connect/disconnect irqs */
#endif
-static struct pxa2xx_udc *the_controller;
+static struct pxa25x_udc *the_controller;
/*-------------------------------------------------------------------------*/
@@ -209,7 +208,7 @@ dump_udccs0(const char *label)
}
static void __maybe_unused
-dump_state(struct pxa2xx_udc *dev)
+dump_state(struct pxa25x_udc *dev)
{
u32 tmp;
unsigned i;
@@ -264,4 +263,4 @@ dump_state(struct pxa2xx_udc *dev)
#define INFO(stuff...) pr_info("udc: " stuff)
-#endif /* __LINUX_USB_GADGET_PXA2XX_H */
+#endif /* __LINUX_USB_GADGET_PXA25X_H */
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index e02bfd4df3a..9c0e82ec5c4 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -38,7 +38,7 @@
#include <linux/usb.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
-
+#include <asm/arch/pxa2xx-regs.h> /* FIXME: for PSSR */
#include <asm/arch/udc.h>
#include "pxa27x_udc.h"
@@ -2360,18 +2360,19 @@ static int pxa_udc_resume(struct platform_device *_dev)
* Software must configure the USB OTG pad, UDC, and UHC
* to the state they were in before entering sleep mode.
*/
- PSSR |= PSSR_OTGPH;
+ if (cpu_is_pxa27x())
+ PSSR |= PSSR_OTGPH;
return 0;
}
#endif
/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:pxa2xx-udc");
+MODULE_ALIAS("platform:pxa27x-udc");
static struct platform_driver udc_driver = {
.driver = {
- .name = "pxa2xx-udc",
+ .name = "pxa27x-udc",
.owner = THIS_MODULE,
},
.remove = __exit_p(pxa_udc_remove),
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index 97453db924f..1d1b7936ee1 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -484,12 +484,4 @@ static inline struct pxa_udc *to_gadget_udc(struct usb_gadget *gadget)
#define ep_warn(ep, fmt, arg...) \
dev_warn(ep->dev->dev, "%s:%s:" fmt, EPNAME(ep), __func__, ## arg)
-/*
- * Cannot include pxa-regs.h, as register names are similar.
- * So PSSR is redefined here. This should be removed once UDC registers will
- * be gone from pxa-regs.h.
- */
-#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status */
-#define PSSR_OTGPH (1 << 6) /* OTG Peripheral Hold */
-
#endif /* __LINUX_USB_GADGET_PXA27X_H */
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 70b0d4b459e..08b27d6bbd4 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -27,6 +27,7 @@
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h> /* FIXME: for PSSR */
#include <asm/arch/ohci.h>
#define PXA_UHC_MAX_PORTNUM 3
@@ -104,7 +105,7 @@ static int pxa27x_start_hc(struct device *dev)
UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
/* Clear any OTG Pin Hold */
- if (PSSR & PSSR_OTGPH)
+ if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH))
PSSR |= PSSR_OTGPH;
return 0;
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index dcd8073c236..30bf7f2f163 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -112,3 +112,10 @@ config BACKLIGHT_CARILLO_RANCH
help
If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
backlight driver.
+
+config BACKLIGHT_PWM
+ tristate "Generic PWM based Backlight Driver"
+ depends on BACKLIGHT_CLASS_DEVICE && HAVE_PWM
+ help
+ If you have a LCD backlight adjustable by PWM, say Y to enable
+ this driver.
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 33f6c7cecc7..b51a7cd1250 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o
obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o
obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
+obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
new file mode 100644
index 00000000000..6338d0e2fe0
--- /dev/null
+++ b/drivers/video/backlight/pwm_bl.c
@@ -0,0 +1,185 @@
+/*
+ * linux/drivers/video/backlight/pwm_bl.c
+ *
+ * simple PWM based backlight control, board code has to setup
+ * 1) pin configuration so PWM waveforms can output
+ * 2) platform_data casts to the PWM id (0/1/2/3 on PXA)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+
+struct pwm_bl_data {
+ struct pwm_device *pwm;
+ unsigned int period;
+ int (*notify)(int brightness);
+};
+
+static int pwm_backlight_update_status(struct backlight_device *bl)
+{
+ struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
+ int brightness = bl->props.brightness;
+ int max = bl->props.max_brightness;
+
+ if (bl->props.power != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (pb->notify)
+ brightness = pb->notify(brightness);
+
+ if (brightness == 0) {
+ pwm_config(pb->pwm, 0, pb->period);
+ pwm_disable(pb->pwm);
+ } else {
+ pwm_config(pb->pwm, brightness * pb->period / max, pb->period);
+ pwm_enable(pb->pwm);
+ }
+ return 0;
+}
+
+static int pwm_backlight_get_brightness(struct backlight_device *bl)
+{
+ return bl->props.brightness;
+}
+
+static struct backlight_ops pwm_backlight_ops = {
+ .update_status = pwm_backlight_update_status,
+ .get_brightness = pwm_backlight_get_brightness,
+};
+
+static int pwm_backlight_probe(struct platform_device *pdev)
+{
+ struct platform_pwm_backlight_data *data = pdev->dev.platform_data;
+ struct backlight_device *bl;
+ struct pwm_bl_data *pb;
+ int ret;
+
+ if (!data)
+ return -EINVAL;
+
+ if (data->init) {
+ ret = data->init(&pdev->dev);
+ if (ret < 0)
+ return ret;
+ }
+
+ pb = kzalloc(sizeof(*pb), GFP_KERNEL);
+ if (!pb) {
+ ret = -ENOMEM;
+ goto err_alloc;
+ }
+
+ pb->period = data->pwm_period_ns;
+ pb->notify = data->notify;
+
+ pb->pwm = pwm_request(data->pwm_id, "backlight");
+ if (IS_ERR(pb->pwm)) {
+ dev_err(&pdev->dev, "unable to request PWM for backlight\n");
+ ret = PTR_ERR(pb->pwm);
+ goto err_pwm;
+ }
+
+ bl = backlight_device_register(pdev->name, &pdev->dev,
+ pb, &pwm_backlight_ops);
+ if (IS_ERR(bl)) {
+ dev_err(&pdev->dev, "failed to register backlight\n");
+ ret = PTR_ERR(bl);
+ goto err_bl;
+ }
+
+ bl->props.max_brightness = data->max_brightness;
+ bl->props.brightness = data->dft_brightness;
+ backlight_update_status(bl);
+
+ platform_set_drvdata(pdev, bl);
+ return 0;
+
+err_bl:
+ pwm_free(pb->pwm);
+err_pwm:
+ kfree(pb);
+err_alloc:
+ if (data->exit)
+ data->exit(&pdev->dev);
+ return ret;
+}
+
+static int pwm_backlight_remove(struct platform_device *pdev)
+{
+ struct platform_pwm_backlight_data *data = pdev->dev.platform_data;
+ struct backlight_device *bl = platform_get_drvdata(pdev);
+ struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
+
+ backlight_device_unregister(bl);
+ pwm_config(pb->pwm, 0, pb->period);
+ pwm_disable(pb->pwm);
+ pwm_free(pb->pwm);
+ kfree(pb);
+ if (data->exit)
+ data->exit(&pdev->dev);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int pwm_backlight_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct backlight_device *bl = platform_get_drvdata(pdev);
+ struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
+
+ pwm_config(pb->pwm, 0, pb->period);
+ pwm_disable(pb->pwm);
+ return 0;
+}
+
+static int pwm_backlight_resume(struct platform_device *pdev)
+{
+ struct backlight_device *bl = platform_get_drvdata(pdev);
+
+ backlight_update_status(bl);
+ return 0;
+}
+#else
+#define pwm_backlight_suspend NULL
+#define pwm_backlight_resume NULL
+#endif
+
+static struct platform_driver pwm_backlight_driver = {
+ .driver = {
+ .name = "pwm-backlight",
+ .owner = THIS_MODULE,
+ },
+ .probe = pwm_backlight_probe,
+ .remove = pwm_backlight_remove,
+ .suspend = pwm_backlight_suspend,
+ .resume = pwm_backlight_resume,
+};
+
+static int __init pwm_backlight_init(void)
+{
+ return platform_driver_register(&pwm_backlight_driver);
+}
+module_init(pwm_backlight_init);
+
+static void __exit pwm_backlight_exit(void)
+{
+ platform_driver_unregister(&pwm_backlight_driver);
+}
+module_exit(pwm_backlight_exit);
+
+MODULE_DESCRIPTION("PWM based Backlight Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 7dcda187d9b..736ee1d3206 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1778,11 +1778,49 @@ failed:
return ret;
}
+static int __devexit pxafb_remove(struct platform_device *dev)
+{
+ struct pxafb_info *fbi = platform_get_drvdata(dev);
+ struct resource *r;
+ int irq;
+ struct fb_info *info;
+
+ if (!fbi)
+ return 0;
+
+ info = &fbi->fb;
+
+ unregister_framebuffer(info);
+
+ pxafb_disable_controller(fbi);
+
+ if (fbi->fb.cmap.len)
+ fb_dealloc_cmap(&fbi->fb.cmap);
+
+ irq = platform_get_irq(dev, 0);
+ free_irq(irq, fbi);
+
+ dma_free_writecombine(&dev->dev, fbi->map_size,
+ fbi->map_cpu, fbi->map_dma);
+
+ iounmap(fbi->mmio_base);
+
+ r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ release_mem_region(r->start, r->end - r->start + 1);
+
+ clk_put(fbi->clk);
+ kfree(fbi);
+
+ return 0;
+}
+
static struct platform_driver pxafb_driver = {
.probe = pxafb_probe,
+ .remove = pxafb_remove,
.suspend = pxafb_suspend,
.resume = pxafb_resume,
.driver = {
+ .owner = THIS_MODULE,
.name = "pxa2xx-fb",
},
};
@@ -1795,7 +1833,13 @@ static int __devinit pxafb_init(void)
return platform_driver_register(&pxafb_driver);
}
+static void __exit pxafb_exit(void)
+{
+ platform_driver_unregister(&pxafb_driver);
+}
+
module_init(pxafb_init);
+module_exit(pxafb_exit);
MODULE_DESCRIPTION("loadable framebuffer driver for PXA");
MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 19:53:01 +0000