diff options
Diffstat (limited to 'drivers')
56 files changed, 6289 insertions, 643 deletions
diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h index 721ba808604..0e9e586e9ba 100644 --- a/drivers/block/aoe/aoe.h +++ b/drivers/block/aoe/aoe.h @@ -1,5 +1,5 @@ /* Copyright (c) 2004 Coraid, Inc. See COPYING for GPL terms. */ -#define VERSION "10" +#define VERSION "12" #define AOE_MAJOR 152 #define DEVICE_NAME "aoe" @@ -7,12 +7,12 @@ * default is 16, which is 15 partitions plus the whole disk */ #ifndef AOE_PARTITIONS -#define AOE_PARTITIONS 16 +#define AOE_PARTITIONS (16) #endif -#define SYSMINOR(aoemajor, aoeminor) ((aoemajor) * 10 + (aoeminor)) -#define AOEMAJOR(sysminor) ((sysminor) / 10) -#define AOEMINOR(sysminor) ((sysminor) % 10) +#define SYSMINOR(aoemajor, aoeminor) ((aoemajor) * NPERSHELF + (aoeminor)) +#define AOEMAJOR(sysminor) ((sysminor) / NPERSHELF) +#define AOEMINOR(sysminor) ((sysminor) % NPERSHELF) #define WHITESPACE " \t\v\f\n" enum { @@ -83,7 +83,7 @@ enum { enum { MAXATADATA = 1024, - NPERSHELF = 10, + NPERSHELF = 16, /* number of slots per shelf address */ FREETAG = -1, MIN_BUFS = 8, }; diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 138dc50270e..7e72e922b41 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -411,6 +411,23 @@ config SENSORS_W83627EHF This driver can also be built as a module. If so, the module will be called w83627ehf. +config SENSORS_HDAPS + tristate "IBM Hard Drive Active Protection System (hdaps)" + depends on HWMON && INPUT && X86 + default n + help + This driver provides support for the IBM Hard Drive Active Protection + System (hdaps), which provides an accelerometer and other misc. data. + Supported laptops include the IBM ThinkPad T41, T42, T43, and R51. + The accelerometer data is readable via sysfs. + + This driver also provides an input class device, allowing the + laptop to act as a pinball machine-esque mouse. This is off by + default but enabled via sysfs or the module parameter "mousedev". + + Say Y here if you have an applicable laptop and want to experience + the awesome power of hdaps. + config HWMON_DEBUG_CHIP bool "Hardware Monitoring Chip debugging messages" depends on HWMON diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 381f1bf04cc..f7d6a2f61ee 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_SENSORS_FSCHER) += fscher.o obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o +obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM75) += lm75.o diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c new file mode 100644 index 00000000000..eaebfc14c93 --- /dev/null +++ b/drivers/hwmon/hdaps.c @@ -0,0 +1,739 @@ +/* + * drivers/hwmon/hdaps.c - driver for IBM's Hard Drive Active Protection System + * + * Copyright (C) 2005 Robert Love <rml@novell.com> + * Copyright (C) 2005 Jesper Juhl <jesper.juhl@gmail.com> + * + * The HardDisk Active Protection System (hdaps) is present in the IBM ThinkPad + * T41, T42, T43, R51, and X40, at least. It provides a basic two-axis + * accelerometer and other data, such as the device's temperature. + * + * Based on the document by Mark A. Smith available at + * http://www.almaden.ibm.com/cs/people/marksmith/tpaps.html and a lot of trial + * and error. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/input.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/timer.h> +#include <linux/dmi.h> +#include <asm/io.h> + +#define HDAPS_LOW_PORT 0x1600 /* first port used by hdaps */ +#define HDAPS_NR_PORTS 0x30 /* 0x1600 - 0x162f */ + +#define STATE_FRESH 0x50 /* accelerometer data is fresh */ + +#define REFRESH_ASYNC 0x00 /* do asynchronous refresh */ +#define REFRESH_SYNC 0x01 /* do synchronous refresh */ + +#define HDAPS_PORT_STATE 0x1611 /* device state */ +#define HDAPS_PORT_YPOS 0x1612 /* y-axis position */ +#define HDAPS_PORT_XPOS 0x1614 /* x-axis position */ +#define HDAPS_PORT_TEMP1 0x1616 /* device temperature, in celcius */ +#define HDAPS_PORT_YVAR 0x1617 /* y-axis variance (what is this?) */ +#define HDAPS_PORT_XVAR 0x1619 /* x-axis variance (what is this?) */ +#define HDAPS_PORT_TEMP2 0x161b /* device temperature (again?) */ +#define HDAPS_PORT_UNKNOWN 0x161c /* what is this? */ +#define HDAPS_PORT_KMACT 0x161d /* keyboard or mouse activity */ + +#define HDAPS_READ_MASK 0xff /* some reads have the low 8 bits set */ + +#define KEYBD_MASK 0x20 /* set if keyboard activity */ +#define MOUSE_MASK 0x40 /* set if mouse activity */ +#define KEYBD_ISSET(n) (!! (n & KEYBD_MASK)) /* keyboard used? */ +#define MOUSE_ISSET(n) (!! (n & MOUSE_MASK)) /* mouse used? */ + +#define INIT_TIMEOUT_MSECS 4000 /* wait up to 4s for device init ... */ +#define INIT_WAIT_MSECS 200 /* ... in 200ms increments */ + +static struct platform_device *pdev; +static struct input_dev hdaps_idev; +static struct timer_list hdaps_timer; +static unsigned int hdaps_mousedev_threshold = 4; +static unsigned long hdaps_poll_ms = 50; +static unsigned int hdaps_mousedev; +static unsigned int hdaps_invert; +static u8 km_activity; +static int rest_x; +static int rest_y; + +static DECLARE_MUTEX(hdaps_sem); + +/* + * __get_latch - Get the value from a given port. Callers must hold hdaps_sem. + */ +static inline u8 __get_latch(u16 port) +{ + return inb(port) & HDAPS_READ_MASK; +} + +/* + * __check_latch - Check a port latch for a given value. Callers must hold + * hdaps_sem. Returns zero if the port contains the given value. + */ +static inline unsigned int __check_latch(u16 port, u8 val) +{ + if (__get_latch(port) == val) + return 0; + return -EINVAL; +} + +/* + * __wait_latch - Wait up to 100us for a port latch to get a certain value, + * returning zero if the value is obtained. Callers must hold hdaps_sem. + */ +static unsigned int __wait_latch(u16 port, u8 val) +{ + unsigned int i; + + for (i = 0; i < 20; i++) { + if (!__check_latch(port, val)) + return 0; + udelay(5); + } + + return -EINVAL; +} + +/* + * __device_refresh - Request a refresh from the accelerometer. + * + * If sync is REFRESH_SYNC, we perform a synchronous refresh and will wait. + * Returns zero if successful and nonzero on error. + * + * If sync is REFRESH_ASYNC, we merely kick off a new refresh if the device is + * not up-to-date. Always returns zero. + * + * Callers must hold hdaps_sem. + */ +static int __device_refresh(unsigned int sync) +{ + u8 state; + + udelay(100); + + state = inb(0x1604); + if (state == STATE_FRESH) + return 0; + + outb(0x11, 0x1610); + outb(0x01, 0x161f); + if (sync == REFRESH_ASYNC) + return 0; + + return __wait_latch(0x1604, STATE_FRESH); +} + +/* + * __device_complete - Indicate to the accelerometer that we are done reading + * data, and then initiate an async refresh. Callers must hold hdaps_sem. + */ +static inline void __device_complete(void) +{ + inb(0x161f); + inb(0x1604); + __device_refresh(REFRESH_ASYNC); +} + +static int __hdaps_readb_one(unsigned int port, u8 *val) +{ + /* do a sync refresh -- we need to be sure that we read fresh data */ + if (__device_refresh(REFRESH_SYNC)) + return -EIO; + + *val = inb(port); + __device_complete(); + + return 0; +} + +/* + * hdaps_readb_one - reads a byte from a single I/O port, placing the value in + * the given pointer. Returns zero on success or a negative error on failure. + * Can sleep. + */ +static int hdaps_readb_one(unsigned int port, u8 *val) +{ + int ret; + + down(&hdaps_sem); + ret = __hdaps_readb_one(port, val); + up(&hdaps_sem); + + return ret; +} + +static int __hdaps_read_pair(unsigned int port1, unsigned int port2, + int *x, int *y) +{ + /* do a sync refresh -- we need to be sure that we read fresh data */ + if (__device_refresh(REFRESH_SYNC)) + return -EIO; + + *y = inw(port2); + *x = inw(port1); + km_activity = inb(HDAPS_PORT_KMACT); + __device_complete(); + + /* if hdaps_invert is set, negate the two values */ + if (hdaps_invert) { + *x = -*x; + *y = -*y; + } + + return 0; +} + +/* + * hdaps_read_pair - reads the values from a pair of ports, placing the values + * in the given pointers. Returns zero on success. Can sleep. + */ +static int hdaps_read_pair(unsigned int port1, unsigned int port2, + int *val1, int *val2) +{ + int ret; + + down(&hdaps_sem); + ret = __hdaps_read_pair(port1, port2, val1, val2); + up(&hdaps_sem); + + return ret; +} + +/* initialize the accelerometer */ +static int hdaps_device_init(void) +{ + unsigned int total_msecs = INIT_TIMEOUT_MSECS; + int ret = -ENXIO; + + down(&hdaps_sem); + + outb(0x13, 0x1610); + outb(0x01, 0x161f); + if (__wait_latch(0x161f, 0x00)) + goto out; + + /* + * The 0x03 value appears to only work on some thinkpads, such as the + * T42p. Others return 0x01. + * + * The 0x02 value occurs when the chip has been previously initialized. + */ + if (__check_latch(0x1611, 0x03) && + __check_latch(0x1611, 0x02) && + __check_latch(0x1611, 0x01)) + goto out; + + printk(KERN_DEBUG "hdaps: initial latch check good (0x%02x).\n", + __get_latch(0x1611)); + + outb(0x17, 0x1610); + outb(0x81, 0x1611); + outb(0x01, 0x161f); + if (__wait_latch(0x161f, 0x00)) + goto out; + if (__wait_latch(0x1611, 0x00)) + goto out; + if (__wait_latch(0x1612, 0x60)) + goto out; + if (__wait_latch(0x1613, 0x00)) + goto out; + outb(0x14, 0x1610); + outb(0x01, 0x1611); + outb(0x01, 0x161f); + if (__wait_latch(0x161f, 0x00)) + goto out; + outb(0x10, 0x1610); + outb(0xc8, 0x1611); + outb(0x00, 0x1612); + outb(0x02, 0x1613); + outb(0x01, 0x161f); + if (__wait_latch(0x161f, 0x00)) + goto out; + if (__device_refresh(REFRESH_SYNC)) + goto out; + if (__wait_latch(0x1611, 0x00)) + goto out; + + /* we have done our dance, now let's wait for the applause */ + while (total_msecs > 0) { + u8 ignored; + + /* a read of the device helps push it into action */ + __hdaps_readb_one(HDAPS_PORT_UNKNOWN, &ignored); + if (!__wait_latch(0x1611, 0x02)) { + ret = 0; + break; + } + + msleep(INIT_WAIT_MSECS); + total_msecs -= INIT_WAIT_MSECS; + } + +out: + up(&hdaps_sem); + return ret; +} + + +/* Input class stuff */ + +/* + * hdaps_calibrate - Zero out our "resting" values. Callers must hold hdaps_sem. + */ +static void hdaps_calibrate(void) +{ + int x, y; + + if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y)) + return; + + rest_x = x; + rest_y = y; +} + +static void hdaps_mousedev_poll(unsigned long unused) +{ + int x, y; + + /* Cannot sleep. Try nonblockingly. If we fail, try again later. */ + if (down_trylock(&hdaps_sem)) { + mod_timer(&hdaps_timer,jiffies+msecs_to_jiffies(hdaps_poll_ms)); + return; + } + + if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y)) + goto out; + + x -= rest_x; + y -= rest_y; + if (abs(x) > hdaps_mousedev_threshold) + input_report_rel(&hdaps_idev, REL_X, x); + if (abs(y) > hdaps_mousedev_threshold) + input_report_rel(&hdaps_idev, REL_Y, y); + input_sync(&hdaps_idev); + + mod_timer(&hdaps_timer, jiffies + msecs_to_jiffies(hdaps_poll_ms)); + +out: + up(&hdaps_sem); +} + +/* + * hdaps_mousedev_enable - enable the input class device. Can sleep. + */ +static void hdaps_mousedev_enable(void) +{ + down(&hdaps_sem); + + /* calibrate the device before enabling */ + hdaps_calibrate(); + + /* initialize the input class */ + init_input_dev(&hdaps_idev); + hdaps_idev.dev = &pdev->dev; + hdaps_idev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL); + hdaps_idev.relbit[0] = BIT(REL_X) | BIT(REL_Y); + hdaps_idev.keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT); + input_register_device(&hdaps_idev); + + /* start up our timer */ + init_timer(&hdaps_timer); + hdaps_timer.function = hdaps_mousedev_poll; + hdaps_timer.expires = jiffies + msecs_to_jiffies(hdaps_poll_ms); + add_timer(&hdaps_timer); + + hdaps_mousedev = 1; + + up(&hdaps_sem); + + printk(KERN_INFO "hdaps: input device enabled.\n"); +} + +/* + * hdaps_mousedev_disable - disable the input class device. Caller must hold + * hdaps_sem. + */ +static void hdaps_mousedev_disable(void) +{ + down(&hdaps_sem); + if (hdaps_mousedev) { + hdaps_mousedev = 0; + del_timer_sync(&hdaps_timer); + input_unregister_device(&hdaps_idev); + } + up(&hdaps_sem); +} + + +/* Device model stuff */ + +static int hdaps_probe(struct device *dev) +{ + int ret; + + ret = hdaps_device_init(); + if (ret) + return ret; + + printk(KERN_INFO "hdaps: device successfully initialized.\n"); + return 0; +} + +static int hdaps_resume(struct device *dev, u32 level) +{ + if (level == RESUME_ENABLE) + return hdaps_device_init(); + return 0; +} + +static struct device_driver hdaps_driver = { + .name = "hdaps", + .bus = &platform_bus_type, + .owner = THIS_MODULE, + .probe = hdaps_probe, + .resume = hdaps_resume +}; + + +/* Sysfs Files */ + +static ssize_t hdaps_position_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret, x, y; + + ret = hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y); + if (ret) + return ret; + + return sprintf(buf, "(%d,%d)\n", x, y); +} + +static ssize_t hdaps_variance_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int ret, x, y; + + ret = hdaps_read_pair(HDAPS_PORT_XVAR, HDAPS_PORT_YVAR, &x, &y); + if (ret) + return ret; + + return sprintf(buf, "(%d,%d)\n", x, y); +} + +static ssize_t hdaps_temp1_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u8 temp; + int ret; + + ret = hdaps_readb_one(HDAPS_PORT_TEMP1, &temp); + if (ret < 0) + return ret; + + return sprintf(buf, "%u\n", temp); +} + +static ssize_t hdaps_temp2_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u8 temp; + int ret; + + ret = hdaps_readb_one(HDAPS_PORT_TEMP2, &temp); + if (ret < 0) + return ret; + + return sprintf(buf, "%u\n", temp); +} + +static ssize_t hdaps_keyboard_activity_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%u\n", KEYBD_ISSET(km_activity)); +} + +static ssize_t hdaps_mouse_activity_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return sprintf(buf, "%u\n", MOUSE_ISSET(km_activity)); +} + +static ssize_t hdaps_calibrate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "(%d,%d)\n", rest_x, rest_y); +} + +static ssize_t hdaps_calibrate_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + down(&hdaps_sem); + hdaps_calibrate(); + up(&hdaps_sem); + + return count; +} + +static ssize_t hdaps_invert_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%u\n", hdaps_invert); +} + +static ssize_t hdaps_invert_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int invert; + + if (sscanf(buf, "%d", &invert) != 1 || (invert != 1 && invert != 0)) + return -EINVAL; + + hdaps_invert = invert; + hdaps_calibrate(); + + return count; +} + +static ssize_t hdaps_mousedev_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", hdaps_mousedev); +} + +static ssize_t hdaps_mousedev_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int enable; + + if (sscanf(buf, "%d", &enable) != 1) + return -EINVAL; + + if (enable == 1) + hdaps_mousedev_enable(); + else if (enable == 0) + hdaps_mousedev_disable(); + else + return -EINVAL; + + return count; +} + +static ssize_t hdaps_poll_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%lu\n", hdaps_poll_ms); +} + +static ssize_t hdaps_poll_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned int poll; + + if (sscanf(buf, "%u", &poll) != 1 || poll == 0) + return -EINVAL; + hdaps_poll_ms = poll; + + return count; +} + +static ssize_t hdaps_threshold_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%u\n", hdaps_mousedev_threshold); +} + +static ssize_t hdaps_threshold_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned int threshold; + + if (sscanf(buf, "%u", &threshold) != 1 || threshold == 0) + return -EINVAL; + hdaps_mousedev_threshold = threshold; + + return count; +} + +static DEVICE_ATTR(position, 0444, hdaps_position_show, NULL); +static DEVICE_ATTR(variance, 0444, hdaps_variance_show, NULL); +static DEVICE_ATTR(temp1, 0444, hdaps_temp1_show, NULL); +static DEVICE_ATTR(temp2, 0444, hdaps_temp2_show, NULL); +static DEVICE_ATTR(keyboard_activity, 0444, hdaps_keyboard_activity_show, NULL); +static DEVICE_ATTR(mouse_activity, 0444, hdaps_mouse_activity_show, NULL); +static DEVICE_ATTR(calibrate, 0644, hdaps_calibrate_show,hdaps_calibrate_store); +static DEVICE_ATTR(invert, 0644, hdaps_invert_show, hdaps_invert_store); +static DEVICE_ATTR(mousedev, 0644, hdaps_mousedev_show, hdaps_mousedev_store); +static DEVICE_ATTR(mousedev_poll_ms, 0644, hdaps_poll_show, hdaps_poll_store); +static DEVICE_ATTR(mousedev_threshold, 0644, hdaps_threshold_show, + hdaps_threshold_store); + +static struct attribute *hdaps_attributes[] = { + &dev_attr_position.attr, + &dev_attr_variance.attr, + &dev_attr_temp1.attr, + &dev_attr_temp2.attr, + &dev_attr_keyboard_activity.attr, + &dev_attr_mouse_activity.attr, + &dev_attr_calibrate.attr, + &dev_attr_mousedev.attr, + &dev_attr_mousedev_threshold.attr, + &dev_attr_mousedev_poll_ms.attr, + &dev_attr_invert.attr, + NULL, +}; + +static struct attribute_group hdaps_attribute_group = { + .attrs = hdaps_attributes, +}; + + +/* Module stuff */ + +/* + * XXX: We should be able to return nonzero and halt the detection process. + * But there is a bug in dmi_check_system() where a nonzero return from the + * first match will result in a return of failure from dmi_check_system(). + * I fixed this; the patch is in 2.6-mm. Once in Linus's tree we can make + * hdaps_dmi_match_invert() return hdaps_dmi_match(), which in turn returns 1. + */ +static int hdaps_dmi_match(struct dmi_system_id *id) +{ + printk(KERN_INFO "hdaps: %s detected.\n", id->ident); + return 0; +} + +static int hdaps_dmi_match_invert(struct dmi_system_id *id) +{ + hdaps_invert = 1; + printk(KERN_INFO "hdaps: inverting axis readings.\n"); + return 0; +} + +#define HDAPS_DMI_MATCH_NORMAL(model) { \ + .ident = "IBM " model, \ + .callback = hdaps_dmi_match, \ + .matches = { \ + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), \ + DMI_MATCH(DMI_PRODUCT_VERSION, model) \ + } \ +} + +#define HDAPS_DMI_MATCH_INVERT(model) { \ + .ident = "IBM " model, \ + .callback = hdaps_dmi_match_invert, \ + .matches = { \ + DMI_MATCH(DMI_BOARD_VENDOR, "IBM"), \ + DMI_MATCH(DMI_PRODUCT_VERSION, model) \ + } \ +} + +static int __init hdaps_init(void) +{ + int ret; + + /* Note that DMI_MATCH(...,"ThinkPad T42") will match "ThinkPad T42p" */ + struct dmi_system_id hdaps_whitelist[] = { + HDAPS_DMI_MATCH_INVERT("ThinkPad R50p"), + HDAPS_DMI_MATCH_NORMAL("ThinkPad R50"), + HDAPS_DMI_MATCH_NORMAL("ThinkPad R51"), + HDAPS_DMI_MATCH_INVERT("ThinkPad T41p"), + HDAPS_DMI_MATCH_NORMAL("ThinkPad T41"), + HDAPS_DMI_MATCH_INVERT("ThinkPad T42p"), + HDAPS_DMI_MATCH_NORMAL("ThinkPad T42"), + HDAPS_DMI_MATCH_NORMAL("ThinkPad T43"), + HDAPS_DMI_MATCH_NORMAL("ThinkPad X40"), + { .ident = NULL } + }; + + if (!dmi_check_system(hdaps_whitelist)) { + printk(KERN_WARNING "hdaps: supported laptop not found!\n"); + ret = -ENXIO; + goto out; + } + + if (!request_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS, "hdaps")) { + ret = -ENXIO; + goto out; + } + + ret = driver_register(&hdaps_driver); + if (ret) + goto out_region; + + pdev = platform_device_register_simple("hdaps", -1, NULL, 0); + if (IS_ERR(pdev)) { + ret = PTR_ERR(pdev); + goto out_driver; + } + + ret = sysfs_create_group(&pdev->dev.kobj, &hdaps_attribute_group); + if (ret) + goto out_device; + + if (hdaps_mousedev) + hdaps_mousedev_enable(); + + printk(KERN_INFO "hdaps: driver successfully loaded.\n"); + return 0; + +out_device: + platform_device_unregister(pdev); +out_driver: + driver_unregister(&hdaps_driver); +out_region: + release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS); +out: + printk(KERN_WARNING "hdaps: driver init failed (ret=%d)!\n", ret); + return ret; +} + +static void __exit hdaps_exit(void) +{ + hdaps_mousedev_disable(); + + sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group); + platform_device_unregister(pdev); + driver_unregister(&hdaps_driver); + release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS); + + printk(KERN_INFO "hdaps: driver unloaded.\n"); +} + +module_init(hdaps_init); +module_exit(hdaps_exit); + +module_param_named(mousedev, hdaps_mousedev, bool, 0); +MODULE_PARM_DESC(mousedev, "enable the input class device"); + +module_param_named(invert, hdaps_invert, bool, 0); +MODULE_PARM_DESC(invert, "invert data along each axis"); + +MODULE_AUTHOR("Robert Love"); +MODULE_DESCRIPTION("IBM Hard Drive Active Protection System (HDAPS) driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c index 8610bce0824..21aa9a41f62 100644 --- a/drivers/hwmon/sis5595.c +++ b/drivers/hwmon/sis5595.c @@ -758,11 +758,6 @@ static int __devinit sis5595_pci_probe(struct pci_dev *dev, return -ENODEV; } - if (!address) { - dev_err(&dev->dev,"No SiS 5595 sensors found.\n"); - return -ENODEV; - } - s_bridge = pci_dev_get(dev); if (i2c_isa_add_driver(&sis5595_driver)) { pci_dev_put(s_bridge); diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index 7e699a8ede2..c9cc683eba4 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -2,8 +2,8 @@ smsc47m1.c - Part of lm_sensors, Linux kernel modules for hardware monitoring - Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x and LPC47M14x - Super-I/O chips. + Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x, + LPC47M15x and LPC47M192 Super-I/O chips. Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com> Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c index eb84997627c..05ddc88e7dd 100644 --- a/drivers/hwmon/via686a.c +++ b/drivers/hwmon/via686a.c @@ -812,11 +812,6 @@ static int __devinit via686a_pci_probe(struct pci_dev *dev, return -ENODEV; } - if (!address) { - dev_err(&dev->dev, "No Via 686A sensors found.\n"); - return -ENODEV; - } - s_bridge = pci_dev_get(dev); if (i2c_isa_add_driver(&via686a_driver)) { pci_dev_put(s_bridge); diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index 02bd5c0239a..3479dc5208e 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -64,6 +64,10 @@ static unsigned short address; /* Insmod parameters */ enum chips { any_chip, w83627hf, w83627thf, w83697hf, w83637hf }; +static int reset; +module_param(reset, bool, 0); +MODULE_PARM_DESC(reset, "Set to one to reset chip on load"); + static int init = 1; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); @@ -1279,7 +1283,15 @@ static void w83627hf_init_client(struct i2c_client *client) int type = data->type; u8 tmp; - if(init) { + if (reset) { + /* Resetting the chip has been the default for a long time, + but repeatedly caused problems (fans going to full + speed...) so it is now optional. It might even go away if + nobody reports it as being useful, as I see very little + reason why this would be needed at all. */ + dev_info(&client->dev, "If reset=1 solved a problem you were " + "having, please report!\n"); + /* save this register */ i = w83627hf_read_value(client, W83781D_REG_BEEP_CONFIG); /* Reset all except Watchdog values and last conversion values diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index e0b7a913431..fe9c0f42a2b 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -98,11 +98,6 @@ struct nforce2_smbus { #define NVIDIA_SMB_PRTCL_PEC 0x80 -/* Other settings */ -#define MAX_TIMEOUT 256 - - - static s32 nforce2_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data); diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c index 811d92e5f5b..cc372136e85 100644 --- a/drivers/mtd/maps/uclinux.c +++ b/drivers/mtd/maps/uclinux.c @@ -25,9 +25,6 @@ /****************************************************************************/ - -/****************************************************************************/ - struct map_info uclinux_ram_map = { .name = "RAM", }; @@ -60,14 +57,15 @@ int __init uclinux_mtd_init(void) struct mtd_info *mtd; struct map_info *mapp; extern char _ebss; + unsigned long addr = (unsigned long) &_ebss; mapp = &uclinux_ram_map; - mapp->phys = (unsigned long) &_ebss; - mapp->size = PAGE_ALIGN(*((unsigned long *)((&_ebss) + 8))); + mapp->phys = addr; + mapp->size = PAGE_ALIGN(ntohl(*((unsigned long *)(addr + 8)))); mapp->bankwidth = 4; printk("uclinux[mtd]: RAM probe address=0x%x size=0x%x\n", - (int) mapp->map_priv_2, (int) mapp->size); + (int) mapp->phys, (int) mapp->size); mapp->virt = ioremap_nocache(mapp->phys, mapp->size); @@ -95,7 +93,6 @@ int __init uclinux_mtd_init(void) printk("uclinux[mtd]: set %s to be root filesystem\n", uclinux_romfs[0].name); ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, 0); - put_mtd_device(mtd); return(0); } @@ -109,7 +106,7 @@ void __exit uclinux_mtd_cleanup(void) map_destroy(uclinux_ram_mtdinfo); uclinux_ram_mtdinfo = NULL; } - if (uclinux_ram_map.map_priv_1) { + if (uclinux_ram_map.virt) { iounmap((void *) uclinux_ram_map.virt); uclinux_ram_map.virt = 0; } diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 6bb9232514b..54fff9c2e80 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1738,11 +1738,18 @@ config 68360_ENET the Motorola 68360 processor. config FEC - bool "FEC ethernet controller (of ColdFire 5272)" - depends on M5272 || M5282 + bool "FEC ethernet controller (of ColdFire CPUs)" + depends on M523x || M527x || M5272 || M528x help Say Y here if you want to use the built-in 10/100 Fast ethernet - controller on the Motorola ColdFire 5272 processor. + controller on some Motorola ColdFire processors. + +config FEC2 + bool "Second FEC ethernet controller (on some ColdFire CPUs)" + depends on FEC + help + Say Y here if you want to use the second built-in 10/100 Fast + ethernet controller on some Motorola ColdFire processors. config NE_H8300 tristate "NE2000 compatible support for H8/300" diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 2c700849137..85504fb900d 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -8,7 +8,7 @@ * describes connections using the internal parallel port I/O, which * is basically all of Port D. * - * Right now, I am very watseful with the buffers. I allocate memory + * Right now, I am very wasteful with the buffers. I allocate memory * pages and then divide them into 2K frame buffers. This way I know I * have buffers large enough to hold one frame within one buffer descriptor. * Once I get this working, I will use 64 or 128 byte CPM buffers, which @@ -19,7 +19,10 @@ * Copyright (c) 2000 Ericsson Radio Systems AB. * * Support for FEC controller of ColdFire/5270/5271/5272/5274/5275/5280/5282. - * Copyrught (c) 2001-2004 Greg Ungerer (gerg@snapgear.com) + * Copyright (c) 2001-2004 Greg Ungerer (gerg@snapgear.com) + * + * Bug fixes and cleanup by Philippe De Muyter (phdm@macqel.be) + * Copyright (c) 2004-2005 Macq Electronique SA. */ #include <linux/config.h> @@ -46,7 +49,8 @@ #include <asm/io.h> #include <asm/pgtable.h> -#if defined(CONFIG_M527x) || defined(CONFIG_M5272) || defined(CONFIG_M528x) +#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || \ + defined(CONFIG_M5272) || defined(CONFIG_M528x) #include <asm/coldfire.h> #include <asm/mcfsim.h> #include "fec.h" @@ -71,7 +75,7 @@ static unsigned int fec_hw[] = { #elif defined(CONFIG_M527x) (MCF_MBAR + 0x1000), (MCF_MBAR + 0x1800), -#elif defined(CONFIG_M528x) +#elif defined(CONFIG_M523x) || defined(CONFIG_M528x) (MCF_MBAR + 0x1000), #else &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec), @@ -94,12 +98,14 @@ static unsigned char fec_mac_default[] = { #define FEC_FLASHMAC 0xffe04000 #elif defined(CONFIG_CANCam) #define FEC_FLASHMAC 0xf0020000 +#elif defined (CONFIG_M5272C3) +#define FEC_FLASHMAC (0xffe04000 + 4) +#elif defined(CONFIG_MOD5272) +#define FEC_FLASHMAC 0xffc0406b #else #define FEC_FLASHMAC 0 #endif -unsigned char *fec_flashmac = (unsigned char *) FEC_FLASHMAC; - /* Forward declarations of some structures to support different PHYs */ @@ -158,7 +164,7 @@ typedef struct { * size bits. Other FEC hardware does not, so we need to take that into * account when setting it. */ -#if defined(CONFIG_M527x) || defined(CONFIG_M528x) +#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) #define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16) #else #define OPT_FRAME_SIZE 0 @@ -196,7 +202,7 @@ struct fec_enet_private { uint phy_id_done; uint phy_status; uint phy_speed; - phy_info_t *phy; + phy_info_t const *phy; struct work_struct phy_task; uint sequence_done; @@ -209,7 +215,6 @@ struct fec_enet_private { int link; int old_link; int full_duplex; - unsigned char mac_addr[ETH_ALEN]; }; static int fec_enet_open(struct net_device *dev); @@ -237,10 +242,10 @@ typedef struct mii_list { } mii_list_t; #define NMII 20 -mii_list_t mii_cmds[NMII]; -mii_list_t *mii_free; -mii_list_t *mii_head; -mii_list_t *mii_tail; +static mii_list_t mii_cmds[NMII]; +static mii_list_t *mii_free; +static mii_list_t *mii_head; +static mii_list_t *mii_tail; static int mii_queue(struct net_device *dev, int request, void (*func)(uint, struct net_device *)); @@ -425,7 +430,7 @@ fec_timeout(struct net_device *dev) } } #endif - fec_restart(dev, 0); + fec_restart(dev, fep->full_duplex); netif_wake_queue(dev); } @@ -757,45 +762,52 @@ static void mii_parse_sr(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); + uint status; - *s &= ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC); + status = *s & ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC); if (mii_reg & 0x0004) - *s |= PHY_STAT_LINK; + status |= PHY_STAT_LINK; if (mii_reg & 0x0010) - *s |= PHY_STAT_FAULT; + status |= PHY_STAT_FAULT; if (mii_reg & 0x0020) - *s |= PHY_STAT_ANC; + status |= PHY_STAT_ANC; + + *s = status; } static void mii_parse_cr(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); + uint status; - *s &= ~(PHY_CONF_ANE | PHY_CONF_LOOP); + status = *s & ~(PHY_CONF_ANE | PHY_CONF_LOOP); if (mii_reg & 0x1000) - *s |= PHY_CONF_ANE; + status |= PHY_CONF_ANE; if (mii_reg & 0x4000) - *s |= PHY_CONF_LOOP; + status |= PHY_CONF_LOOP; + *s = status; } static void mii_parse_anar(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); + uint status; - *s &= ~(PHY_CONF_SPMASK); + status = *s & ~(PHY_CONF_SPMASK); if (mii_reg & 0x0020) - *s |= PHY_CONF_10HDX; + status |= PHY_CONF_10HDX; if (mii_reg & 0x0040) - *s |= PHY_CONF_10FDX; + status |= PHY_CONF_10FDX; if (mii_reg & 0x0080) - *s |= PHY_CONF_100HDX; + status |= PHY_CONF_100HDX; if (mii_reg & 0x00100) - *s |= PHY_CONF_100FDX; + status |= PHY_CONF_100FDX; + *s = status; } /* ------------------------------------------------------------------------- */ @@ -811,37 +823,34 @@ static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); + uint status; - *s &= ~(PHY_STAT_SPMASK); - + status = *s & ~(PHY_STAT_SPMASK); if (mii_reg & 0x0800) { if (mii_reg & 0x1000) - *s |= PHY_STAT_100FDX; + status |= PHY_STAT_100FDX; else - *s |= PHY_STAT_100HDX; + status |= PHY_STAT_100HDX; } else { if (mii_reg & 0x1000) - *s |= PHY_STAT_10FDX; + status |= PHY_STAT_10FDX; else - *s |= PHY_STAT_10HDX; + status |= PHY_STAT_10HDX; } + *s = status; } -static phy_info_t phy_info_lxt970 = { - 0x07810000, - "LXT970", - - (const phy_cmd_t []) { /* config */ +static phy_cmd_t const phy_cmd_lxt970_config[] = { { mk_mii_read(MII_REG_CR), mii_parse_cr }, { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, { mk_mii_end, } - }, - (const phy_cmd_t []) { /* startup - enable interrupts */ + }; +static phy_cmd_t const phy_cmd_lxt970_startup[] = { /* enable interrupts */ { mk_mii_write(MII_LXT970_IER, 0x0002), NULL }, { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ { mk_mii_end, } - }, - (const phy_cmd_t []) { /* ack_int */ + }; +static phy_cmd_t const phy_cmd_lxt970_ack_int[] = { /* read SR and ISR to acknowledge */ { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_read(MII_LXT970_ISR), NULL }, @@ -849,11 +858,18 @@ static phy_info_t phy_info_lxt970 = { /* find out the current status */ { mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr }, { mk_mii_end, } - }, - (const phy_cmd_t []) { /* shutdown - disable interrupts */ + }; +static phy_cmd_t const phy_cmd_lxt970_shutdown[] = { /* disable interrupts */ { mk_mii_write(MII_LXT970_IER, 0x0000), NULL }, { mk_mii_end, } - }, + }; +static phy_info_t const phy_info_lxt970 = { + .id = 0x07810000, + .name = "LXT970", + .config = phy_cmd_lxt970_config, + .startup = phy_cmd_lxt970_startup, + .ack_int = phy_cmd_lxt970_ack_int, + .shutdown = phy_cmd_lxt970_shutdown }; /* ------------------------------------------------------------------------- */ @@ -878,45 +894,44 @@ static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); + uint status; - *s &= ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC); + status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_LINK | PHY_STAT_ANC); if (mii_reg & 0x0400) { fep->link = 1; - *s |= PHY_STAT_LINK; + status |= PHY_STAT_LINK; } else { fep->link = 0; } if (mii_reg & 0x0080) - *s |= PHY_STAT_ANC; + status |= PHY_STAT_ANC; if (mii_reg & 0x4000) { if (mii_reg & 0x0200) - *s |= PHY_STAT_100FDX; + status |= PHY_STAT_100FDX; else - *s |= PHY_STAT_100HDX; + status |= PHY_STAT_100HDX; } else { if (mii_reg & 0x0200) - *s |= PHY_STAT_10FDX; + status |= PHY_STAT_10FDX; else - *s |= PHY_STAT_10HDX; + status |= PHY_STAT_10HDX; } if (mii_reg & 0x0008) - *s |= PHY_STAT_FAULT; -} + status |= PHY_STAT_FAULT; -static phy_info_t phy_info_lxt971 = { - 0x0001378e, - "LXT971", + *s = status; +} - (const phy_cmd_t []) { /* config */ - /* limit to 10MBit because my protorype board +static phy_cmd_t const phy_cmd_lxt971_config[] = { + /* limit to 10MBit because my prototype board * doesn't work with 100. */ { mk_mii_read(MII_REG_CR), mii_parse_cr }, { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 }, { mk_mii_end, } - }, - (const phy_cmd_t []) { /* startup - enable interrupts */ + }; +static phy_cmd_t const phy_cmd_lxt971_startup[] = { /* enable interrupts */ { mk_mii_write(MII_LXT971_IER, 0x00f2), NULL }, { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ { mk_mii_write(MII_LXT971_LCR, 0xd422), NULL }, /* LED config */ @@ -925,19 +940,26 @@ static phy_info_t phy_info_lxt971 = { * read here to get a valid value in ack_int */ { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_end, } - }, - (const phy_cmd_t []) { /* ack_int */ + }; +static phy_cmd_t const phy_cmd_lxt971_ack_int[] = { + /* acknowledge the int before reading status ! */ + { mk_mii_read(MII_LXT971_ISR), NULL }, /* find out the current status */ { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 }, - /* we only need to read ISR to acknowledge */ - { mk_mii_read(MII_LXT971_ISR), NULL }, { mk_mii_end, } - }, - (const phy_cmd_t []) { /* shutdown - disable interrupts */ + }; +static phy_cmd_t const phy_cmd_lxt971_shutdown[] = { /* disable interrupts */ { mk_mii_write(MII_LXT971_IER, 0x0000), NULL }, { mk_mii_end, } - }, + }; +static phy_info_t const phy_info_lxt971 = { + .id = 0x0001378e, + .name = "LXT971", + .config = phy_cmd_lxt971_config, + .startup = phy_cmd_lxt971_startup, + .ack_int = phy_cmd_lxt971_ack_int, + .shutdown = phy_cmd_lxt971_shutdown }; /* ------------------------------------------------------------------------- */ @@ -956,22 +978,21 @@ static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); + uint status; - *s &= ~(PHY_STAT_SPMASK); + status = *s & ~(PHY_STAT_SPMASK); switch((mii_reg >> 2) & 7) { - case 1: *s |= PHY_STAT_10HDX; break; - case 2: *s |= PHY_STAT_100HDX; break; - case 5: *s |= PHY_STAT_10FDX; break; - case 6: *s |= PHY_STAT_100FDX; break; - } + case 1: status |= PHY_STAT_10HDX; break; + case 2: status |= PHY_STAT_100HDX; break; + case 5: status |= PHY_STAT_10FDX; break; + case 6: status |= PHY_STAT_100FDX; break; } -static phy_info_t phy_info_qs6612 = { - 0x00181440, - "QS6612", - - (const phy_cmd_t []) { /* config */ + *s = status; +} + +static phy_cmd_t const phy_cmd_qs6612_config[] = { /* The PHY powers up isolated on the RPX, * so send a command to allow operation. */ @@ -981,13 +1002,13 @@ static phy_info_t phy_info_qs6612 = { { mk_mii_read(MII_REG_CR), mii_parse_cr }, { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, { mk_mii_end, } - }, - (const phy_cmd_t []) { /* startup - enable interrupts */ + }; +static phy_cmd_t const phy_cmd_qs6612_startup[] = { /* enable interrupts */ { mk_mii_write(MII_QS6612_IMR, 0x003a), NULL }, { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ { mk_mii_end, } - }, - (const phy_cmd_t []) { /* ack_int */ + }; +static phy_cmd_t const phy_cmd_qs6612_ack_int[] = { /* we need to read ISR, SR and ANER to acknowledge */ { mk_mii_read(MII_QS6612_ISR), NULL }, { mk_mii_read(MII_REG_SR), mii_parse_sr }, @@ -996,11 +1017,18 @@ static phy_info_t phy_info_qs6612 = { /* read pcr to get info */ { mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr }, { mk_mii_end, } - }, - (const phy_cmd_t []) { /* shutdown - disable interrupts */ + }; +static phy_cmd_t const phy_cmd_qs6612_shutdown[] = { /* disable interrupts */ { mk_mii_write(MII_QS6612_IMR, 0x0000), NULL }, { mk_mii_end, } - }, + }; +static phy_info_t const phy_info_qs6612 = { + .id = 0x00181440, + .name = "QS6612", + .config = phy_cmd_qs6612_config, + .startup = phy_cmd_qs6612_startup, + .ack_int = phy_cmd_qs6612_ack_int, + .shutdown = phy_cmd_qs6612_shutdown }; /* ------------------------------------------------------------------------- */ @@ -1020,49 +1048,54 @@ static void mii_parse_am79c874_dr(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile uint *s = &(fep->phy_status); + uint status; - *s &= ~(PHY_STAT_SPMASK | PHY_STAT_ANC); + status = *s & ~(PHY_STAT_SPMASK | PHY_STAT_ANC); if (mii_reg & 0x0080) - *s |= PHY_STAT_ANC; + status |= PHY_STAT_ANC; if (mii_reg & 0x0400) - *s |= ((mii_reg & 0x0800) ? PHY_STAT_100FDX : PHY_STAT_100HDX); + status |= ((mii_reg & 0x0800) ? PHY_STAT_100FDX : PHY_STAT_100HDX); else - *s |= ((mii_reg & 0x0800) ? PHY_STAT_10FDX : PHY_STAT_10HDX); + status |= ((mii_reg & 0x0800) ? PHY_STAT_10FDX : PHY_STAT_10HDX); + + *s = status; } -static phy_info_t phy_info_am79c874 = { - 0x00022561, - "AM79C874", - - (const phy_cmd_t []) { /* config */ - /* limit to 10MBit because my protorype board - * doesn't work with 100. */ +static phy_cmd_t const phy_cmd_am79c874_config[] = { { mk_mii_read(MII_REG_CR), mii_parse_cr }, { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, { mk_mii_read(MII_AM79C874_DR), mii_parse_am79c874_dr }, { mk_mii_end, } - }, - (const phy_cmd_t []) { /* startup - enable interrupts */ + }; +static phy_cmd_t const phy_cmd_am79c874_startup[] = { /* enable interrupts */ { mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL }, { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_end, } - }, - (const phy_cmd_t []) { /* ack_int */ + }; +static phy_cmd_t const phy_cmd_am79c874_ack_int[] = { /* find out the current status */ { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_read(MII_AM79C874_DR), mii_parse_am79c874_dr }, /* we only need to read ISR to acknowledge */ { mk_mii_read(MII_AM79C874_ICSR), NULL }, { mk_mii_end, } - }, - (const phy_cmd_t []) { /* shutdown - disable interrupts */ + }; +static phy_cmd_t const phy_cmd_am79c874_shutdown[] = { /* disable interrupts */ { mk_mii_write(MII_AM79C874_ICSR, 0x0000), NULL }, { mk_mii_end, } - }, + }; +static phy_info_t const phy_info_am79c874 = { + .id = 0x00022561, + .name = "AM79C874", + .config = phy_cmd_am79c874_config, + .startup = phy_cmd_am79c874_startup, + .ack_int = phy_cmd_am79c874_ack_int, + .shutdown = phy_cmd_am79c874_shutdown }; + /* ------------------------------------------------------------------------- */ /* Kendin KS8721BL phy */ @@ -1072,37 +1105,40 @@ static phy_info_t phy_info_am79c874 = { #define MII_KS8721BL_ICSR 22 #define MII_KS8721BL_PHYCR 31 -static phy_info_t phy_info_ks8721bl = { - 0x00022161, - "KS8721BL", - - (const phy_cmd_t []) { /* config */ +static phy_cmd_t const phy_cmd_ks8721bl_config[] = { { mk_mii_read(MII_REG_CR), mii_parse_cr }, { mk_mii_read(MII_REG_ANAR), mii_parse_anar }, { mk_mii_end, } - }, - (const phy_cmd_t []) { /* startup */ + }; +static phy_cmd_t const phy_cmd_ks8721bl_startup[] = { /* enable interrupts */ { mk_mii_write(MII_KS8721BL_ICSR, 0xff00), NULL }, { mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */ { mk_mii_read(MII_REG_SR), mii_parse_sr }, { mk_mii_end, } - }, - (const phy_cmd_t []) { /* ack_int */ + }; +static phy_cmd_t const phy_cmd_ks8721bl_ack_int[] = { /* find out the current status */ { mk_mii_read(MII_REG_SR), mii_parse_sr }, /* we only need to read ISR to acknowledge */ { mk_mii_read(MII_KS8721BL_ICSR), NULL }, { mk_mii_end, } - }, - (const phy_cmd_t []) { /* shutdown */ + }; +static phy_cmd_t const phy_cmd_ks8721bl_shutdown[] = { /* disable interrupts */ { mk_mii_write(MII_KS8721BL_ICSR, 0x0000), NULL }, { mk_mii_end, } - }, + }; +static phy_info_t const phy_info_ks8721bl = { + .id = 0x00022161, + .name = "KS8721BL", + .config = phy_cmd_ks8721bl_config, + .startup = phy_cmd_ks8721bl_startup, + .ack_int = phy_cmd_ks8721bl_ack_int, + .shutdown = phy_cmd_ks8721bl_shutdown }; /* ------------------------------------------------------------------------- */ -static phy_info_t *phy_info[] = { +static phy_info_t const * const phy_info[] = { &phy_info_lxt970, &phy_info_lxt971, &phy_info_qs6612, @@ -1129,16 +1165,23 @@ mii_link_interrupt(int irq, void * dev_id, struct pt_regs * regs); static void __inline__ fec_request_intrs(struct net_device *dev) { volatile unsigned long *icrp; + static const struct idesc { + char *name; + unsigned short irq; + irqreturn_t (*handler)(int, void *, struct pt_regs *); + } *idp, id[] = { + { "fec(RX)", 86, fec_enet_interrupt }, + { "fec(TX)", 87, fec_enet_interrupt }, + { "fec(OTHER)", 88, fec_enet_interrupt }, + { "fec(MII)", 66, mii_link_interrupt }, + { NULL }, + }; /* Setup interrupt handlers. */ - if (request_irq(86, fec_enet_interrupt, 0, "fec(RX)", dev) != 0) - printk("FEC: Could not allocate FEC(RC) IRQ(86)!\n"); - if (request_irq(87, fec_enet_interrupt, 0, "fec(TX)", dev) != 0) - printk("FEC: Could not allocate FEC(RC) IRQ(87)!\n"); - if (request_irq(88, fec_enet_interrupt, 0, "fec(OTHER)", dev) != 0) - printk("FEC: Could not allocate FEC(OTHER) IRQ(88)!\n"); - if (request_irq(66, mii_link_interrupt, 0, "fec(MII)", dev) != 0) - printk("FEC: Could not allocate MII IRQ(66)!\n"); + for (idp = id; idp->name; idp++) { + if (request_irq(idp->irq, idp->handler, 0, idp->name, dev) != 0) + printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, idp->irq); + } /* Unmask interrupt at ColdFire 5272 SIM */ icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR3); @@ -1169,17 +1212,16 @@ static void __inline__ fec_get_mac(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile fec_t *fecp; - unsigned char *iap, tmpaddr[6]; - int i; + unsigned char *iap, tmpaddr[ETH_ALEN]; fecp = fep->hwp; - if (fec_flashmac) { + if (FEC_FLASHMAC) { /* * Get MAC address from FLASH. * If it is all 1's or 0's, use the default. */ - iap = fec_flashmac; + iap = (unsigned char *)FEC_FLASHMAC; if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) iap = fec_mac_default; @@ -1192,14 +1234,11 @@ static void __inline__ fec_get_mac(struct net_device *dev) iap = &tmpaddr[0]; } - for (i=0; i<ETH_ALEN; i++) - dev->dev_addr[i] = fep->mac_addr[i] = *iap++; + memcpy(dev->dev_addr, iap, ETH_ALEN); /* Adjust MAC if using default MAC address */ - if (iap == fec_mac_default) { - dev->dev_addr[ETH_ALEN-1] = fep->mac_addr[ETH_ALEN-1] = - iap[ETH_ALEN-1] + fep->index; - } + if (iap == fec_mac_default) + dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; } static void __inline__ fec_enable_phy_intr(void) @@ -1234,48 +1273,44 @@ static void __inline__ fec_uncache(unsigned long addr) /* ------------------------------------------------------------------------- */ -#elif defined(CONFIG_M527x) || defined(CONFIG_M528x) +#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) /* - * Code specific to Coldfire 5270/5271/5274/5275 and 5280/5282 setups. + * Code specific to Coldfire 5230/5231/5232/5234/5235, + * the 5270/5271/5274/5275 and 5280/5282 setups. */ static void __inline__ fec_request_intrs(struct net_device *dev) { struct fec_enet_private *fep; int b; + static const struct idesc { + char *name; + unsigned short irq; + } *idp, id[] = { + { "fec(TXF)", 23 }, + { "fec(TXB)", 24 }, + { "fec(TXFIFO)", 25 }, + { "fec(TXCR)", 26 }, + { "fec(RXF)", 27 }, + { "fec(RXB)", 28 }, + { "fec(MII)", 29 }, + { "fec(LC)", 30 }, + { "fec(HBERR)", 31 }, + { "fec(GRA)", 32 }, + { "fec(EBERR)", 33 }, + { "fec(BABT)", 34 }, + { "fec(BABR)", 35 }, + { NULL }, + }; fep = netdev_priv(dev); b = (fep->index) ? 128 : 64; /* Setup interrupt handlers. */ - if (request_irq(b+23, fec_enet_interrupt, 0, "fec(TXF)", dev) != 0) - printk("FEC: Could not allocate FEC(TXF) IRQ(%d+23)!\n", b); - if (request_irq(b+24, fec_enet_interrupt, 0, "fec(TXB)", dev) != 0) - printk("FEC: Could not allocate FEC(TXB) IRQ(%d+24)!\n", b); - if (request_irq(b+25, fec_enet_interrupt, 0, "fec(TXFIFO)", dev) != 0) - printk("FEC: Could not allocate FEC(TXFIFO) IRQ(%d+25)!\n", b); - if (request_irq(b+26, fec_enet_interrupt, 0, "fec(TXCR)", dev) != 0) - printk("FEC: Could not allocate FEC(TXCR) IRQ(%d+26)!\n", b); - - if (request_irq(b+27, fec_enet_interrupt, 0, "fec(RXF)", dev) != 0) - printk("FEC: Could not allocate FEC(RXF) IRQ(%d+27)!\n", b); - if (request_irq(b+28, fec_enet_interrupt, 0, "fec(RXB)", dev) != 0) - printk("FEC: Could not allocate FEC(RXB) IRQ(%d+28)!\n", b); - - if (request_irq(b+29, fec_enet_interrupt, 0, "fec(MII)", dev) != 0) - printk("FEC: Could not allocate FEC(MII) IRQ(%d+29)!\n", b); - if (request_irq(b+30, fec_enet_interrupt, 0, "fec(LC)", dev) != 0) - printk("FEC: Could not allocate FEC(LC) IRQ(%d+30)!\n", b); - if (request_irq(b+31, fec_enet_interrupt, 0, "fec(HBERR)", dev) != 0) - printk("FEC: Could not allocate FEC(HBERR) IRQ(%d+31)!\n", b); - if (request_irq(b+32, fec_enet_interrupt, 0, "fec(GRA)", dev) != 0) - printk("FEC: Could not allocate FEC(GRA) IRQ(%d+32)!\n", b); - if (request_irq(b+33, fec_enet_interrupt, 0, "fec(EBERR)", dev) != 0) - printk("FEC: Could not allocate FEC(EBERR) IRQ(%d+33)!\n", b); - if (request_irq(b+34, fec_enet_interrupt, 0, "fec(BABT)", dev) != 0) - printk("FEC: Could not allocate FEC(BABT) IRQ(%d+34)!\n", b); - if (request_irq(b+35, fec_enet_interrupt, 0, "fec(BABR)", dev) != 0) - printk("FEC: Could not allocate FEC(BABR) IRQ(%d+35)!\n", b); + for (idp = id; idp->name; idp++) { + if (request_irq(b+idp->irq, fec_enet_interrupt, 0, idp->name, dev) != 0) + printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq); + } /* Unmask interrupts at ColdFire 5280/5282 interrupt controller */ { @@ -1300,11 +1335,13 @@ static void __inline__ fec_request_intrs(struct net_device *dev) #if defined(CONFIG_M528x) /* Set up gpio outputs for MII lines */ { - volatile unsigned short *gpio_paspar; + volatile u16 *gpio_paspar; + volatile u8 *gpio_pehlpar; - gpio_paspar = (volatile unsigned short *) (MCF_IPSBAR + - 0x100056); - *gpio_paspar = 0x0f00; + gpio_paspar = (volatile u16 *) (MCF_IPSBAR + 0x100056); + gpio_pehlpar = (volatile u16 *) (MCF_IPSBAR + 0x100058); + *gpio_paspar |= 0x0f00; + *gpio_pehlpar = 0xc0; } #endif } @@ -1331,17 +1368,16 @@ static void __inline__ fec_get_mac(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); volatile fec_t *fecp; - unsigned char *iap, tmpaddr[6]; - int i; + unsigned char *iap, tmpaddr[ETH_ALEN]; fecp = fep->hwp; - if (fec_flashmac) { + if (FEC_FLASHMAC) { /* * Get MAC address from FLASH. * If it is all 1's or 0's, use the default. */ - iap = fec_flashmac; + iap = FEC_FLASHMAC; if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) && (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0)) iap = fec_mac_default; @@ -1354,14 +1390,11 @@ static void __inline__ fec_get_mac(struct net_device *dev) iap = &tmpaddr[0]; } - for (i=0; i<ETH_ALEN; i++) - dev->dev_addr[i] = fep->mac_addr[i] = *iap++; + memcpy(dev->dev_addr, iap, ETH_ALEN); /* Adjust MAC if using default MAC address */ - if (iap == fec_mac_default) { - dev->dev_addr[ETH_ALEN-1] = fep->mac_addr[ETH_ALEN-1] = - iap[ETH_ALEN-1] + fep->index; - } + if (iap == fec_mac_default) + dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index; } static void __inline__ fec_enable_phy_intr(void) @@ -1392,7 +1425,7 @@ static void __inline__ fec_uncache(unsigned long addr) #else /* - * Code sepcific to the MPC860T setup. + * Code specific to the MPC860T setup. */ static void __inline__ fec_request_intrs(struct net_device *dev) { @@ -1424,13 +1457,10 @@ static void __inline__ fec_request_intrs(struct net_device *dev) static void __inline__ fec_get_mac(struct net_device *dev) { - struct fec_enet_private *fep = netdev_priv(dev); - unsigned char *iap, tmpaddr[6]; bd_t *bd; - int i; - iap = bd->bi_enetaddr; bd = (bd_t *)__res; + memcpy(dev->dev_addr, bd->bi_enetaddr, ETH_ALEN); #ifdef CONFIG_RPXCLASSIC /* The Embedded Planet boards have only one MAC address in @@ -1439,14 +1469,8 @@ static void __inline__ fec_get_mac(struct net_device *dev) * the address bits above something that would have (up to * now) been allocated. */ - for (i=0; i<6; i++) - tmpaddr[i] = *iap++; - tmpaddr[3] |= 0x80; - iap = tmpaddr; + dev->dev_adrd[3] |= 0x80; #endif - - for (i=0; i<6; i++) - dev->dev_addr[i] = fep->mac_addr[i] = *iap++; } static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep) @@ -1556,7 +1580,7 @@ static void mii_display_status(struct net_device *dev) static void mii_display_config(struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); - volatile uint *s = &(fep->phy_status); + uint status = fep->phy_status; /* ** When we get here, phy_task is already removed from @@ -1565,23 +1589,23 @@ static void mii_display_config(struct net_device *dev) fep->mii_phy_task_queued = 0; printk("%s: config: auto-negotiation ", dev->name); - if (*s & PHY_CONF_ANE) + if (status & PHY_CONF_ANE) printk("on"); else printk("off"); - if (*s & PHY_CONF_100FDX) + if (status & PHY_CONF_100FDX) printk(", 100FDX"); - if (*s & PHY_CONF_100HDX) + if (status & PHY_CONF_100HDX) printk(", 100HDX"); - if (*s & PHY_CONF_10FDX) + if (status & PHY_CONF_10FDX) printk(", 10FDX"); - if (*s & PHY_CONF_10HDX) + if (status & PHY_CONF_10HDX) printk(", 10HDX"); - if (!(*s & PHY_CONF_SPMASK)) + if (!(status & PHY_CONF_SPMASK)) printk(", No speed/duplex selected?"); - if (*s & PHY_CONF_LOOP) + if (status & PHY_CONF_LOOP) printk(", loopback enabled"); printk(".\n"); @@ -1639,7 +1663,7 @@ static void mii_queue_relink(uint mii_reg, struct net_device *dev) schedule_work(&fep->phy_task); } -/* mii_queue_config is called in user context from fec_enet_open */ +/* mii_queue_config is called in interrupt context from fec_enet_mii */ static void mii_queue_config(uint mii_reg, struct net_device *dev) { struct fec_enet_private *fep = netdev_priv(dev); @@ -1652,14 +1676,14 @@ static void mii_queue_config(uint mii_reg, struct net_device *dev) schedule_work(&fep->phy_task); } - - -phy_cmd_t phy_cmd_relink[] = { { mk_mii_read(MII_REG_CR), mii_queue_relink }, - { mk_mii_end, } }; -phy_cmd_t phy_cmd_config[] = { { mk_mii_read(MII_REG_CR), mii_queue_config }, - { mk_mii_end, } }; - - +phy_cmd_t const phy_cmd_relink[] = { + { mk_mii_read(MII_REG_CR), mii_queue_relink }, + { mk_mii_end, } + }; +phy_cmd_t const phy_cmd_config[] = { + { mk_mii_read(MII_REG_CR), mii_queue_config }, + { mk_mii_end, } + }; /* Read remainder of PHY ID. */ @@ -1897,17 +1921,15 @@ static void set_multicast_list(struct net_device *dev) static void fec_set_mac_address(struct net_device *dev) { - struct fec_enet_private *fep; volatile fec_t *fecp; - fep = netdev_priv(dev); - fecp = fep->hwp; + fecp = ((struct fec_enet_private *)netdev_priv(dev))->hwp; /* Set station address. */ - fecp->fec_addr_low = fep->mac_addr[3] | (fep->mac_addr[2] << 8) | - (fep->mac_addr[1] << 16) | (fep->mac_addr[0] << 24); - fecp->fec_addr_high = (fep->mac_addr[5] << 16) | - (fep->mac_addr[4] << 24); + fecp->fec_addr_low = dev->dev_addr[3] | (dev->dev_addr[2] << 8) | + (dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24); + fecp->fec_addr_high = (dev->dev_addr[5] << 16) | + (dev->dev_addr[4] << 24); } @@ -1943,7 +1965,7 @@ int __init fec_enet_init(struct net_device *dev) udelay(10); /* Clear and enable interrupts */ - fecp->fec_ievent = 0xffc0; + fecp->fec_ievent = 0xffc00000; fecp->fec_imask = (FEC_ENET_TXF | FEC_ENET_TXB | FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII); fecp->fec_hash_table_high = 0; @@ -2063,11 +2085,6 @@ int __init fec_enet_init(struct net_device *dev) /* setup MII interface */ fec_set_mii(dev, fep); - printk("%s: FEC ENET Version 0.2, ", dev->name); - for (i=0; i<5; i++) - printk("%02x:", dev->dev_addr[i]); - printk("%02x\n", dev->dev_addr[5]); - /* Queue up command to detect the PHY and initialize the * remainder of the interface. */ @@ -2106,18 +2123,12 @@ fec_restart(struct net_device *dev, int duplex) /* Clear any outstanding interrupt. */ - fecp->fec_ievent = 0xffc0; + fecp->fec_ievent = 0xffc00000; fec_enable_phy_intr(); /* Set station address. */ - fecp->fec_addr_low = fep->mac_addr[3] | (fep->mac_addr[2] << 8) | - (fep->mac_addr[1] << 16) | (fep->mac_addr[0] << 24); - fecp->fec_addr_high = (fep->mac_addr[5] << 16) | - (fep->mac_addr[4] << 24); - - for (i=0; i<ETH_ALEN; i++) - dev->dev_addr[i] = fep->mac_addr[i]; + fec_set_mac_address(dev); /* Reset all multicast. */ @@ -2215,7 +2226,7 @@ fec_stop(struct net_device *dev) fecp->fec_x_cntrl = 0x01; /* Graceful transmit stop */ - while(!(fecp->fec_ievent & 0x10000000)); + while(!(fecp->fec_ievent & FEC_ENET_GRA)); /* Whack a reset. We should wait for this. */ @@ -2234,7 +2245,9 @@ fec_stop(struct net_device *dev) static int __init fec_enet_module_init(void) { struct net_device *dev; - int i, err; + int i, j, err; + + printk("FEC ENET Version 0.2\n"); for (i = 0; (i < FEC_MAX_PORTS); i++) { dev = alloc_etherdev(sizeof(struct fec_enet_private)); @@ -2250,6 +2263,11 @@ static int __init fec_enet_module_init(void) free_netdev(dev); return -EIO; } + + printk("%s: ethernet ", dev->name); + for (j = 0; (j < 5); j++) + printk("%02x:", dev->dev_addr[j]); + printk("%02x\n", dev->dev_addr[5]); } return 0; } diff --git a/drivers/net/fec.h b/drivers/net/fec.h index c6e4f979ff5..045761b8a60 100644 --- a/drivers/net/fec.h +++ b/drivers/net/fec.h @@ -1,8 +1,9 @@ /****************************************************************************/ /* - * fec.h -- Fast Ethernet Controller for Motorola ColdFire 5270, - 5271, 5272, 5274, 5275, 5280 and 5282. + * fec.h -- Fast Ethernet Controller for Motorola ColdFire 5230, + * 5231, 5232, 5234, 5235, 5270, 5271, 5272, 5274, 5275, + * 5280 and 5282. * * (C) Copyright 2000-2003, Greg Ungerer (gerg@snapgear.com) * (C) Copyright 2000-2001, Lineo (www.lineo.com) @@ -13,7 +14,7 @@ #define FEC_H /****************************************************************************/ -#if defined(CONFIG_M527x) || defined(CONFIG_M528x) +#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) /* * Just figures, Motorola would have to change the offsets for * registers in the same peripheral device on different models diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c index 43b03c55f45..e2ebdcad553 100644 --- a/drivers/serial/mcfserial.c +++ b/drivers/serial/mcfserial.c @@ -63,8 +63,13 @@ struct timer_list mcfrs_timer_struct; #endif #if defined(CONFIG_HW_FEITH) - #define CONSOLE_BAUD_RATE 38400 - #define DEFAULT_CBAUD B38400 +#define CONSOLE_BAUD_RATE 38400 +#define DEFAULT_CBAUD B38400 +#endif + +#if defined(CONFIG_MOD5272) +#define CONSOLE_BAUD_RATE 115200 +#define DEFAULT_CBAUD B115200 #endif #ifndef CONSOLE_BAUD_RATE @@ -90,7 +95,7 @@ static struct tty_driver *mcfrs_serial_driver; #undef SERIAL_DEBUG_OPEN #undef SERIAL_DEBUG_FLOW -#if defined(CONFIG_M527x) || defined(CONFIG_M528x) +#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) #define IRQBASE (MCFINT_VECBASE+MCFINT_UART0) #else #define IRQBASE 73 @@ -1510,7 +1515,7 @@ static void mcfrs_irqinit(struct mcf_serial *info) *portp = (*portp & ~0x000000ff) | 0x00000055; portp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PDCNT); *portp = (*portp & ~0x000003fc) | 0x000002a8; -#elif defined(CONFIG_M527x) || defined(CONFIG_M528x) +#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) volatile unsigned char *icrp, *uartp; volatile unsigned long *imrp; diff --git a/drivers/usb/class/audio.c b/drivers/usb/class/audio.c index f8f21567cc2..50858273f8d 100644 --- a/drivers/usb/class/audio.c +++ b/drivers/usb/class/audio.c @@ -631,8 +631,10 @@ static void usbin_stop(struct usb_audiodev *as) i = u->flags; spin_unlock_irqrestore(&as->lock, flags); while (i & (FLG_URB0RUNNING|FLG_URB1RUNNING|FLG_SYNC0RUNNING|FLG_SYNC1RUNNING)) { - set_current_state(notkilled ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE); - schedule_timeout(1); + if (notkilled) + schedule_timeout_interruptible(1); + else + schedule_timeout_uninterruptible(1); spin_lock_irqsave(&as->lock, flags); i = u->flags; spin_unlock_irqrestore(&as->lock, flags); @@ -1102,8 +1104,10 @@ static void usbout_stop(struct usb_audiodev *as) i = u->flags; spin_unlock_irqrestore(&as->lock, flags); while (i & (FLG_URB0RUNNING|FLG_URB1RUNNING|FLG_SYNC0RUNNING|FLG_SYNC1RUNNING)) { - set_current_state(notkilled ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE); - schedule_timeout(1); + if (notkilled) + schedule_timeout_interruptible(1); + else + schedule_timeout_uninterruptible(1); spin_lock_irqsave(&as->lock, flags); i = u->flags; spin_unlock_irqrestore(&as->lock, flags); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 12ecdb03ee5..1017a97a418 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1606,7 +1606,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd, struct pt_regs * r) return IRQ_NONE; hcd->saw_irq = 1; - if (hcd->state != start && hcd->state == HC_STATE_HALT) + if (hcd->state == HC_STATE_HALT) usb_hc_died (hcd); return IRQ_HANDLED; } @@ -1630,7 +1630,6 @@ void usb_hc_died (struct usb_hcd *hcd) spin_lock_irqsave (&hcd_root_hub_lock, flags); if (hcd->rh_registered) { hcd->poll_rh = 0; - del_timer(&hcd->rh_timer); /* make khubd clean up old urbs and devices */ usb_set_device_state (hcd->self.root_hub, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 758c7f0ed15..a12cab5314e 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -435,6 +435,7 @@ void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe) static void hub_power_on(struct usb_hub *hub) { int port1; + unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2; /* if hub supports power switching, enable power on each port */ if ((hub->descriptor->wHubCharacteristics & HUB_CHAR_LPSM) < 2) { @@ -444,8 +445,8 @@ static void hub_power_on(struct usb_hub *hub) USB_PORT_FEAT_POWER); } - /* Wait for power to be enabled */ - msleep(hub->descriptor->bPwrOn2PwrGood * 2); + /* Wait at least 100 msec for power to become stable */ + msleep(max(pgood_delay, (unsigned) 100)); } static void hub_quiesce(struct usb_hub *hub) @@ -1460,7 +1461,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, port1, status); else { status = hub_port_wait_reset(hub, port1, udev, delay); - if (status) + if (status && status != -ENOTCONN) dev_dbg(hub->intfdev, "port_wait_reset: err = %d\n", status); @@ -1469,8 +1470,8 @@ static int hub_port_reset(struct usb_hub *hub, int port1, /* return on disconnect or reset */ switch (status) { case 0: - /* TRSTRCY = 10 ms */ - msleep(10); + /* TRSTRCY = 10 ms; plus some extra */ + msleep(10 + 40); /* FALL THROUGH */ case -ENOTCONN: case -ENODEV: diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 020815397a4..5c40980a5bd 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -483,6 +483,7 @@ ep_release (struct inode *inode, struct file *fd) data->state = STATE_EP_DISABLED; data->desc.bDescriptorType = 0; data->hs_desc.bDescriptorType = 0; + usb_ep_disable(data->ep); } put_ep (data); return 0; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 2507e898af0..b948ffd94f4 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -400,6 +400,23 @@ static int ehci_hc_reset (struct usb_hcd *hcd) return -EIO; } break; + case PCI_VENDOR_ID_NVIDIA: + /* NVidia reports that certain chips don't handle + * QH, ITD, or SITD addresses above 2GB. (But TD, + * data buffer, and periodic schedule are normal.) + */ + switch (pdev->device) { + case 0x003c: /* MCP04 */ + case 0x005b: /* CK804 */ + case 0x00d8: /* CK8 */ + case 0x00e8: /* CK8S */ + if (pci_set_consistent_dma_mask(pdev, + DMA_31BIT_MASK) < 0) + ehci_warn (ehci, "can't enable NVidia " + "workaround for >2GB RAM\n"); + break; + } + break; } /* optional debug port, normally in the first BAR */ @@ -759,12 +776,16 @@ static int ehci_resume (struct usb_hcd *hcd) if (time_before (jiffies, ehci->next_statechange)) msleep (100); - /* If any port is suspended, we know we can/must resume the HC. */ + /* If any port is suspended (or owned by the companion), + * we know we can/must resume the HC (and mustn't reset it). + */ for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) { u32 status; port--; status = readl (&ehci->regs->port_status [port]); - if (status & PORT_SUSPEND) { + if (!(status & PORT_POWER)) + continue; + if (status & (PORT_SUSPEND | PORT_OWNER)) { down (&hcd->self.root_hub->serialize); retval = ehci_hub_resume (hcd); up (&hcd->self.root_hub->serialize); @@ -1126,8 +1147,7 @@ rescan: case QH_STATE_UNLINK: /* wait for hw to finish? */ idle_timeout: spin_unlock_irqrestore (&ehci->lock, flags); - set_current_state (TASK_UNINTERRUPTIBLE); - schedule_timeout (1); + schedule_timeout_uninterruptible(1); goto rescan; case QH_STATE_IDLE: /* fully unlinked */ if (list_empty (&qh->qtd_list)) { diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 36cc1f2218d..18d3f227031 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -54,7 +54,7 @@ static int ehci_hub_suspend (struct usb_hcd *hcd) /* suspend any active/unsuspended ports, maybe allow wakeup */ while (port--) { u32 __iomem *reg = &ehci->regs->port_status [port]; - u32 t1 = readl (reg); + u32 t1 = readl (reg) & ~PORT_RWC_BITS; u32 t2 = t1; if ((t1 & PORT_PE) && !(t1 & PORT_OWNER)) @@ -115,7 +115,8 @@ static int ehci_hub_resume (struct usb_hcd *hcd) i = HCS_N_PORTS (ehci->hcs_params); while (i--) { temp = readl (&ehci->regs->port_status [i]); - temp &= ~(PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E); + temp &= ~(PORT_RWC_BITS + | PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E); if (temp & PORT_SUSPEND) { ehci->reset_done [i] = jiffies + msecs_to_jiffies (20); temp |= PORT_RESUME; @@ -128,7 +129,7 @@ static int ehci_hub_resume (struct usb_hcd *hcd) temp = readl (&ehci->regs->port_status [i]); if ((temp & PORT_SUSPEND) == 0) continue; - temp &= ~PORT_RESUME; + temp &= ~(PORT_RWC_BITS | PORT_RESUME); writel (temp, &ehci->regs->port_status [i]); ehci_vdbg (ehci, "resumed port %d\n", i + 1); } @@ -191,6 +192,7 @@ static int check_reset_complete ( // what happens if HCS_N_CC(params) == 0 ? port_status |= PORT_OWNER; + port_status &= ~PORT_RWC_BITS; writel (port_status, &ehci->regs->port_status [index]); } else @@ -233,7 +235,8 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) if (temp & PORT_OWNER) { /* don't report this in GetPortStatus */ if (temp & PORT_CSC) { - temp &= ~PORT_CSC; + temp &= ~PORT_RWC_BITS; + temp |= PORT_CSC; writel (temp, &ehci->regs->port_status [i]); } continue; @@ -343,7 +346,7 @@ static int ehci_hub_control ( &ehci->regs->port_status [wIndex]); break; case USB_PORT_FEAT_C_ENABLE: - writel (temp | PORT_PEC, + writel((temp & ~PORT_RWC_BITS) | PORT_PEC, &ehci->regs->port_status [wIndex]); break; case USB_PORT_FEAT_SUSPEND: @@ -353,7 +356,8 @@ static int ehci_hub_control ( if ((temp & PORT_PE) == 0) goto error; /* resume signaling for 20 msec */ - writel ((temp & ~PORT_WAKE_BITS) | PORT_RESUME, + temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); + writel (temp | PORT_RESUME, &ehci->regs->port_status [wIndex]); ehci->reset_done [wIndex] = jiffies + msecs_to_jiffies (20); @@ -364,15 +368,15 @@ static int ehci_hub_control ( break; case USB_PORT_FEAT_POWER: if (HCS_PPC (ehci->hcs_params)) - writel (temp & ~PORT_POWER, + writel (temp & ~(PORT_RWC_BITS | PORT_POWER), &ehci->regs->port_status [wIndex]); break; case USB_PORT_FEAT_C_CONNECTION: - writel (temp | PORT_CSC, + writel((temp & ~PORT_RWC_BITS) | PORT_CSC, &ehci->regs->port_status [wIndex]); break; case USB_PORT_FEAT_C_OVER_CURRENT: - writel (temp | PORT_OCC, + writel((temp & ~PORT_RWC_BITS) | PORT_OCC, &ehci->regs->port_status [wIndex]); break; case USB_PORT_FEAT_C_RESET: @@ -416,7 +420,7 @@ static int ehci_hub_control ( /* stop resume signaling */ temp = readl (&ehci->regs->port_status [wIndex]); - writel (temp & ~PORT_RESUME, + writel (temp & ~(PORT_RWC_BITS | PORT_RESUME), &ehci->regs->port_status [wIndex]); retval = handshake ( &ehci->regs->port_status [wIndex], @@ -437,7 +441,7 @@ static int ehci_hub_control ( ehci->reset_done [wIndex] = 0; /* force reset to complete */ - writel (temp & ~PORT_RESET, + writel (temp & ~(PORT_RWC_BITS | PORT_RESET), &ehci->regs->port_status [wIndex]); /* REVISIT: some hardware needs 550+ usec to clear * this bit; seems too long to spin routinely... @@ -500,6 +504,7 @@ static int ehci_hub_control ( if (temp & PORT_OWNER) break; + temp &= ~PORT_RWC_BITS; switch (wValue) { case USB_PORT_FEAT_SUSPEND: if ((temp & PORT_PE) == 0 diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 20c9b550097..f34a0516d35 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -263,6 +263,7 @@ struct ehci_regs { #define PORT_PE (1<<2) /* port enable */ #define PORT_CSC (1<<1) /* connect status change */ #define PORT_CONNECT (1<<0) /* device connected */ +#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) } __attribute__ ((packed)); /* Appendix C, Debug port ... intended for use with special "debug devices" diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 447f488f5d9..7924c74f958 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -228,23 +228,22 @@ ohci_dump_roothub ( char **next, unsigned *size) { - u32 temp, ndp, i; + u32 temp, i; temp = roothub_a (controller); if (temp == ~(u32)0) return; - ndp = (temp & RH_A_NDP); if (verbose) { ohci_dbg_sw (controller, next, size, - "roothub.a %08x POTPGT=%d%s%s%s%s%s NDP=%d\n", temp, + "roothub.a %08x POTPGT=%d%s%s%s%s%s NDP=%d(%d)\n", temp, ((temp & RH_A_POTPGT) >> 24) & 0xff, (temp & RH_A_NOCP) ? " NOCP" : "", (temp & RH_A_OCPM) ? " OCPM" : "", (temp & RH_A_DT) ? " DT" : "", (temp & RH_A_NPS) ? " NPS" : "", (temp & RH_A_PSM) ? " PSM" : "", - ndp + (temp & RH_A_NDP), controller->num_ports ); temp = roothub_b (controller); ohci_dbg_sw (controller, next, size, @@ -266,7 +265,7 @@ ohci_dump_roothub ( ); } - for (i = 0; i < ndp; i++) { + for (i = 0; i < controller->num_ports; i++) { temp = roothub_portstatus (controller, i); dbg_port_sw (controller, i, temp, next, size); } diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 56b43f2a0e5..67c1aa5eb1c 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -382,8 +382,7 @@ sanitize: goto sanitize; } spin_unlock_irqrestore (&ohci->lock, flags); - set_current_state (TASK_UNINTERRUPTIBLE); - schedule_timeout (1); + schedule_timeout_uninterruptible(1); goto rescan; case ED_IDLE: /* fully unlinked */ if (list_empty (&ed->td_list)) { @@ -485,6 +484,10 @@ static int ohci_init (struct ohci_hcd *ohci) // flush the writes (void) ohci_readl (ohci, &ohci->regs->control); + /* Read the number of ports unless overridden */ + if (ohci->num_ports == 0) + ohci->num_ports = roothub_a(ohci) & RH_A_NDP; + if (ohci->hcca) return 0; @@ -561,10 +564,8 @@ static int ohci_run (struct ohci_hcd *ohci) msleep(temp); temp = roothub_a (ohci); if (!(temp & RH_A_NPS)) { - unsigned ports = temp & RH_A_NDP; - /* power down each port */ - for (temp = 0; temp < ports; temp++) + for (temp = 0; temp < ohci->num_ports; temp++) ohci_writel (ohci, RH_PS_LSDA, &ohci->regs->roothub.portstatus [temp]); } @@ -720,6 +721,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd, struct pt_regs *ptregs) if (ints & OHCI_INTR_RD) { ohci_vdbg (ohci, "resume detect\n"); + ohci_writel (ohci, OHCI_INTR_RD, ®s->intrstatus); if (hcd->state != HC_STATE_QUIESCING) schedule_work(&ohci->rh_resume); } @@ -861,7 +863,7 @@ static int ohci_restart (struct ohci_hcd *ohci) * and that if we try to turn them back on the root hub * will respond to CSC processing. */ - i = roothub_a (ohci) & RH_A_NDP; + i = ohci->num_ports; while (i--) ohci_writel (ohci, RH_PS_PSS, &ohci->regs->roothub.portstatus [temp]); diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 83ca4549a50..ce7b28da7a1 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -184,7 +184,7 @@ static int ohci_hub_resume (struct usb_hcd *hcd) if (status != -EINPROGRESS) return status; - temp = roothub_a (ohci) & RH_A_NDP; + temp = ohci->num_ports; enables = 0; while (temp--) { u32 stat = ohci_readl (ohci, @@ -304,7 +304,7 @@ static int ohci_hub_status_data (struct usb_hcd *hcd, char *buf) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ports, i, changed = 0, length = 1; + int i, changed = 0, length = 1; int can_suspend = hcd->can_wakeup; unsigned long flags; @@ -319,9 +319,10 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) goto done; } - ports = roothub_a (ohci) & RH_A_NDP; - if (ports > MAX_ROOT_PORTS) { - ohci_err (ohci, "bogus NDP=%d, rereads as NDP=%d\n", ports, + /* undocumented erratum seen on at least rev D */ + if ((ohci->flags & OHCI_QUIRK_AMD756) + && (roothub_a (ohci) & RH_A_NDP) > MAX_ROOT_PORTS) { + ohci_warn (ohci, "bogus NDP, rereads as NDP=%d\n", ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP); /* retry later; "should not happen" */ goto done; @@ -332,13 +333,13 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) buf [0] = changed = 1; else buf [0] = 0; - if (ports > 7) { + if (ohci->num_ports > 7) { buf [1] = 0; length++; } /* look at each port */ - for (i = 0; i < ports; i++) { + for (i = 0; i < ohci->num_ports; i++) { u32 status = roothub_portstatus (ohci, i); if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC @@ -395,15 +396,14 @@ ohci_hub_descriptor ( struct usb_hub_descriptor *desc ) { u32 rh = roothub_a (ohci); - int ports = rh & RH_A_NDP; u16 temp; desc->bDescriptorType = 0x29; desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24; desc->bHubContrCurrent = 0; - desc->bNbrPorts = ports; - temp = 1 + (ports / 8); + desc->bNbrPorts = ohci->num_ports; + temp = 1 + (ohci->num_ports / 8); desc->bDescLength = 7 + 2 * temp; temp = 0; @@ -421,7 +421,7 @@ ohci_hub_descriptor ( rh = roothub_b (ohci); memset(desc->bitmap, 0xff, sizeof(desc->bitmap)); desc->bitmap [0] = rh & RH_B_DR; - if (ports > 7) { + if (ohci->num_ports > 7) { desc->bitmap [1] = (rh & RH_B_DR) >> 8; desc->bitmap [2] = 0xff; } else diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index e5bc1789d18..2fdb262d472 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -75,33 +75,6 @@ static int pxa27x_ohci_select_pmm( int mode ) return 0; } -/* - If you select PMM_PERPORT_MODE, you should set the port power - */ -static int pxa27x_ohci_set_port_power( int port ) -{ - if ( (pxa27x_ohci_pmm_state==PMM_PERPORT_MODE) - && (port>0) && (port<PXA_UHC_MAX_PORTNUM) ) { - UHCRHPS(port) |= 0x100; - return 0; - } - return -1; -} - -/* - If you select PMM_PERPORT_MODE, you should set the port power - */ -static int pxa27x_ohci_clear_port_power( int port ) -{ - if ( (pxa27x_ohci_pmm_state==PMM_PERPORT_MODE) - && (port>0) && (port<PXA_UHC_MAX_PORTNUM) ) { - UHCRHPS(port) |= 0x200; - return 0; - } - - return -1; -} - extern int usb_disabled(void); /*-------------------------------------------------------------------------*/ @@ -130,11 +103,17 @@ static void pxa27x_start_hc(struct platform_device *dev) Polarity Low to active low. Supply power to USB ports. */ UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) & ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE); + + pxa27x_ohci_pmm_state = PMM_PERPORT_MODE; } UHCHR &= ~UHCHR_SSE; UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE); + + /* Clear any OTG Pin Hold */ + if (PSSR & PSSR_OTGPH) + PSSR |= PSSR_OTGPH; } static void pxa27x_stop_hc(struct platform_device *dev) @@ -198,17 +177,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, pxa27x_start_hc(dev); /* Select Power Management Mode */ - pxa27x_ohci_select_pmm( PMM_PERPORT_MODE ); - - /* If choosing PMM_PERPORT_MODE, we should set the port power before we use it. */ - if (pxa27x_ohci_set_port_power(1) < 0) - printk(KERN_ERR "Setting port 1 power failed.\n"); - - if (pxa27x_ohci_clear_port_power(2) < 0) - printk(KERN_ERR "Setting port 2 power failed.\n"); - - if (pxa27x_ohci_clear_port_power(3) < 0) - printk(KERN_ERR "Setting port 3 power failed.\n"); + pxa27x_ohci_select_pmm(pxa27x_ohci_pmm_state); ohci_hcd_init(hcd_to_ohci(hcd)); @@ -258,6 +227,9 @@ ohci_pxa27x_start (struct usb_hcd *hcd) ohci_dbg (ohci, "ohci_pxa27x_start, ohci:%p", ohci); + /* The value of NDP in roothub_a is incorrect on this hardware */ + ohci->num_ports = 3; + if ((ret = ohci_init(ohci)) < 0) return ret; diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 71cdd226286..8a9b9d9209e 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -383,6 +383,7 @@ struct ohci_hcd { /* * driver state */ + int num_ports; int load [NUM_INTS]; u32 hc_control; /* copy of hc control reg */ unsigned long next_statechange; /* suspend/resume */ diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 0d5d2545bf0..0c024898cbe 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -97,14 +97,9 @@ static void uhci_get_current_frame_number(struct uhci_hcd *uhci); /* to make sure it doesn't hog all of the bandwidth */ #define DEPTH_INTERVAL 5 -static inline void restart_timer(struct uhci_hcd *uhci) -{ - mod_timer(&uhci->stall_timer, jiffies + msecs_to_jiffies(100)); -} - -#include "uhci-hub.c" #include "uhci-debug.c" #include "uhci-q.c" +#include "uhci-hub.c" /* * Make sure the controller is completely inactive, unable to @@ -160,7 +155,6 @@ static void hc_died(struct uhci_hcd *uhci) { reset_hc(uhci); uhci->hc_inaccessible = 1; - del_timer(&uhci->stall_timer); } /* @@ -287,8 +281,11 @@ __acquires(uhci->lock) /* Enable resume-detect interrupts if they work. * Then enter Global Suspend mode, still configured. */ - int_enable = (resume_detect_interrupts_are_broken(uhci) ? - 0 : USBINTR_RESUME); + uhci->working_RD = 1; + int_enable = USBINTR_RESUME; + if (resume_detect_interrupts_are_broken(uhci)) { + uhci->working_RD = int_enable = 0; + } outw(int_enable, uhci->io_addr + USBINTR); outw(USBCMD_EGSM | USBCMD_CF, uhci->io_addr + USBCMD); mb(); @@ -315,7 +312,6 @@ __acquires(uhci->lock) uhci->rh_state = new_state; uhci->is_stopped = UHCI_IS_STOPPED; - del_timer(&uhci->stall_timer); uhci_to_hcd(uhci)->poll_rh = !int_enable; uhci_scan_schedule(uhci, NULL); @@ -335,7 +331,6 @@ static void start_rh(struct uhci_hcd *uhci) mb(); uhci->rh_state = UHCI_RH_RUNNING; uhci_to_hcd(uhci)->poll_rh = 1; - restart_timer(uhci); } static void wakeup_rh(struct uhci_hcd *uhci) @@ -374,20 +369,6 @@ __acquires(uhci->lock) mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies); } -static void stall_callback(unsigned long _uhci) -{ - struct uhci_hcd *uhci = (struct uhci_hcd *) _uhci; - unsigned long flags; - - spin_lock_irqsave(&uhci->lock, flags); - uhci_scan_schedule(uhci, NULL); - check_fsbr(uhci); - - if (!uhci->is_stopped) - restart_timer(uhci); - spin_unlock_irqrestore(&uhci->lock, flags); -} - static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); @@ -418,8 +399,10 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs) "host controller halted, " "very bad!\n"); hc_died(uhci); - spin_unlock_irqrestore(&uhci->lock, flags); - return IRQ_HANDLED; + + /* Force a callback in case there are + * pending unlinks */ + mod_timer(&hcd->rh_timer, jiffies); } spin_unlock_irqrestore(&uhci->lock, flags); } @@ -427,10 +410,11 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd, struct pt_regs *regs) if (status & USBSTS_RD) usb_hcd_poll_rh_status(hcd); - - spin_lock_irqsave(&uhci->lock, flags); - uhci_scan_schedule(uhci, regs); - spin_unlock_irqrestore(&uhci->lock, flags); + else { + spin_lock_irqsave(&uhci->lock, flags); + uhci_scan_schedule(uhci, regs); + spin_unlock_irqrestore(&uhci->lock, flags); + } return IRQ_HANDLED; } @@ -595,10 +579,6 @@ static int uhci_start(struct usb_hcd *hcd) init_waitqueue_head(&uhci->waitqh); - init_timer(&uhci->stall_timer); - uhci->stall_timer.function = stall_callback; - uhci->stall_timer.data = (unsigned long) uhci; - uhci->fl = dma_alloc_coherent(uhci_dev(uhci), sizeof(*uhci->fl), &dma_handle, 0); if (!uhci->fl) { @@ -745,11 +725,11 @@ static void uhci_stop(struct usb_hcd *hcd) struct uhci_hcd *uhci = hcd_to_uhci(hcd); spin_lock_irq(&uhci->lock); - reset_hc(uhci); + if (!uhci->hc_inaccessible) + reset_hc(uhci); uhci_scan_schedule(uhci, NULL); spin_unlock_irq(&uhci->lock); - del_timer_sync(&uhci->stall_timer); release_uhci(uhci); } @@ -811,13 +791,12 @@ static int uhci_suspend(struct usb_hcd *hcd, pm_message_t message) */ pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0); uhci->hc_inaccessible = 1; + hcd->poll_rh = 0; /* FIXME: Enable non-PME# remote wakeup? */ done: spin_unlock_irq(&uhci->lock); - if (rc == 0) - del_timer_sync(&hcd->rh_timer); return rc; } @@ -850,8 +829,11 @@ static int uhci_resume(struct usb_hcd *hcd) spin_unlock_irq(&uhci->lock); - if (hcd->poll_rh) + if (!uhci->working_RD) { + /* Suspended root hub needs to be polled */ + hcd->poll_rh = 1; usb_hcd_poll_rh_status(hcd); + } return 0; } #endif diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index bf9c5f9b508..282f40b7588 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -345,9 +345,6 @@ enum uhci_rh_state { /* * This describes the full uhci information. - * - * Note how the "proper" USB information is just - * a subset of what the full implementation needs. */ struct uhci_hcd { @@ -360,8 +357,6 @@ struct uhci_hcd { struct dma_pool *qh_pool; struct dma_pool *td_pool; - struct usb_bus *bus; - struct uhci_td *term_td; /* Terminating TD, see UHCI bug */ struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QH's */ @@ -380,6 +375,8 @@ struct uhci_hcd { unsigned int scan_in_progress:1; /* Schedule scan is running */ unsigned int need_rescan:1; /* Redo the schedule scan */ unsigned int hc_inaccessible:1; /* HC is suspended or dead */ + unsigned int working_RD:1; /* Suspended root hub doesn't + need to be polled */ /* Support for port suspend/resume/reset */ unsigned long port_c_suspend; /* Bit-arrays of ports */ @@ -405,9 +402,7 @@ struct uhci_hcd { /* List of URB's awaiting completion callback */ struct list_head complete_list; /* P: uhci->lock */ - int rh_numports; - - struct timer_list stall_timer; + int rh_numports; /* Number of root-hub ports */ wait_queue_head_t waitqh; /* endpoint_disable waiters */ }; diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 4eace2b19dd..a71e48a6680 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -145,15 +145,16 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); unsigned long flags; - int status; + int status = 0; spin_lock_irqsave(&uhci->lock, flags); - if (uhci->hc_inaccessible) { - status = 0; - goto done; - } + uhci_scan_schedule(uhci, NULL); + if (uhci->hc_inaccessible) + goto done; + check_fsbr(uhci); uhci_check_ports(uhci); + status = get_hub_status_data(uhci, buf); switch (uhci->rh_state) { diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index bbb36cd6ed6..ea0d168a8c6 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -33,7 +33,7 @@ static void uhci_free_pending_tds(struct uhci_hcd *uhci); static inline void uhci_set_next_interrupt(struct uhci_hcd *uhci) { if (uhci->is_stopped) - mod_timer(&uhci->stall_timer, jiffies); + mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies); uhci->term_td->status |= cpu_to_le32(TD_CTRL_IOC); } diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig index 482c4be521f..1e53934907c 100644 --- a/drivers/usb/input/Kconfig +++ b/drivers/usb/input/Kconfig @@ -286,3 +286,23 @@ config USB_KEYSPAN_REMOTE To compile this driver as a module, choose M here: the module will be called keyspan_remote. + +config USB_APPLETOUCH + tristate "Apple USB Touchpad support" + depends on USB && INPUT + ---help--- + Say Y here if you want to use an Apple USB Touchpad. + + These are the touchpads that can be found on post-February 2005 + Apple Powerbooks (prior models have a Synaptics touchpad connected + to the ADB bus). + + This driver provides a basic mouse driver but can be interfaced + with the synaptics X11 driver to provide acceleration and + scrolling in X11. + + For further information, see + <file:Documentation/input/appletouch.txt>. + + To compile this driver as a module, choose M here: the + module will be called appletouch. diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile index 43b2f999edf..5e03b93f29f 100644 --- a/drivers/usb/input/Makefile +++ b/drivers/usb/input/Makefile @@ -41,3 +41,4 @@ obj-$(CONFIG_USB_WACOM) += wacom.o obj-$(CONFIG_USB_ACECAD) += acecad.o obj-$(CONFIG_USB_YEALINK) += yealink.o obj-$(CONFIG_USB_XPAD) += xpad.o +obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o diff --git a/drivers/usb/input/appletouch.c b/drivers/usb/input/appletouch.c new file mode 100644 index 00000000000..e03c1c567a1 --- /dev/null +++ b/drivers/usb/input/appletouch.c @@ -0,0 +1,469 @@ +/* + * Apple USB Touchpad (for post-February 2005 PowerBooks) driver + * + * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net) + * Copyright (C) 2005 Stelian Pop (stelian@popies.net) + * Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de) + * Copyright (C) 2005 Peter Osterlund (petero2@telia.com) + * + * Thanks to Alex Harper <basilisk@foobox.net> for his inputs. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/input.h> +#include <linux/usb_input.h> + +/* Apple has powerbooks which have the keyboard with different Product IDs */ +#define APPLE_VENDOR_ID 0x05AC + +#define ATP_DEVICE(prod) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_CLASS | \ + USB_DEVICE_ID_MATCH_INT_PROTOCOL, \ + .idVendor = APPLE_VENDOR_ID, \ + .idProduct = (prod), \ + .bInterfaceClass = 0x03, \ + .bInterfaceProtocol = 0x02 + +/* table of devices that work with this driver */ +static struct usb_device_id atp_table [] = { + { ATP_DEVICE(0x020E) }, + { ATP_DEVICE(0x020F) }, + { ATP_DEVICE(0x030A) }, + { ATP_DEVICE(0x030B) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, atp_table); + +/* size of a USB urb transfer */ +#define ATP_DATASIZE 81 + +/* + * number of sensors. Note that only 16 instead of 26 X (horizontal) + * sensors exist on 12" and 15" PowerBooks. All models have 16 Y + * (vertical) sensors. + */ +#define ATP_XSENSORS 26 +#define ATP_YSENSORS 16 + +/* amount of fuzz this touchpad generates */ +#define ATP_FUZZ 16 + +/* maximum pressure this driver will report */ +#define ATP_PRESSURE 300 +/* + * multiplication factor for the X and Y coordinates. + * We try to keep the touchpad aspect ratio while still doing only simple + * arithmetics. + * The factors below give coordinates like: + * 0 <= x < 960 on 12" and 15" Powerbooks + * 0 <= x < 1600 on 17" Powerbooks + * 0 <= y < 646 + */ +#define ATP_XFACT 64 +#define ATP_YFACT 43 + +/* + * Threshold for the touchpad sensors. Any change less than ATP_THRESHOLD is + * ignored. + */ +#define ATP_THRESHOLD 5 + +/* Structure to hold all of our device specific stuff */ +struct atp { + struct usb_device * udev; /* usb device */ + struct urb * urb; /* usb request block */ + signed char * data; /* transferred data */ + int open; /* non-zero if opened */ + struct input_dev input; /* input dev */ + int valid; /* are the sensors valid ? */ + int x_old; /* last reported x/y, */ + int y_old; /* used for smoothing */ + /* current value of the sensors */ + signed char xy_cur[ATP_XSENSORS + ATP_YSENSORS]; + /* last value of the sensors */ + signed char xy_old[ATP_XSENSORS + ATP_YSENSORS]; + /* accumulated sensors */ + int xy_acc[ATP_XSENSORS + ATP_YSENSORS]; +}; + +#define dbg_dump(msg, tab) \ + if (debug > 1) { \ + int i; \ + printk("appletouch: %s %lld", msg, (long long)jiffies); \ + for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) \ + printk(" %02x", tab[i]); \ + printk("\n"); \ + } + +#define dprintk(format, a...) \ + do { \ + if (debug) printk(format, ##a); \ + } while (0) + +MODULE_AUTHOR("Johannes Berg, Stelian Pop, Frank Arnold"); +MODULE_DESCRIPTION("Apple PowerBooks USB touchpad driver"); +MODULE_LICENSE("GPL"); + +static int debug = 1; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activate debugging output"); + +static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact, + int *z, int *fingers) +{ + int i; + /* values to calculate mean */ + int pcum = 0, psum = 0; + + *fingers = 0; + + for (i = 0; i < nb_sensors; i++) { + if (xy_sensors[i] < ATP_THRESHOLD) + continue; + if ((i - 1 < 0) || (xy_sensors[i - 1] < ATP_THRESHOLD)) + (*fingers)++; + pcum += xy_sensors[i] * i; + psum += xy_sensors[i]; + } + + if (psum > 0) { + *z = psum; + return pcum * fact / psum; + } + + return 0; +} + +static inline void atp_report_fingers(struct input_dev *input, int fingers) +{ + input_report_key(input, BTN_TOOL_FINGER, fingers == 1); + input_report_key(input, BTN_TOOL_DOUBLETAP, fingers == 2); + input_report_key(input, BTN_TOOL_TRIPLETAP, fingers > 2); +} + +static void atp_complete(struct urb* urb, struct pt_regs* regs) +{ + int x, y, x_z, y_z, x_f, y_f; + int retval, i; + struct atp *dev = urb->context; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* This urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", + __FUNCTION__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", + __FUNCTION__, urb->status); + goto exit; + } + + /* drop incomplete datasets */ + if (dev->urb->actual_length != ATP_DATASIZE) { + dprintk("appletouch: incomplete data package.\n"); + goto exit; + } + + /* reorder the sensors values */ + for (i = 0; i < 8; i++) { + /* X values */ + dev->xy_cur[i ] = dev->data[5 * i + 2]; + dev->xy_cur[i + 8] = dev->data[5 * i + 4]; + dev->xy_cur[i + 16] = dev->data[5 * i + 42]; + if (i < 2) + dev->xy_cur[i + 24] = dev->data[5 * i + 44]; + + /* Y values */ + dev->xy_cur[i + 26] = dev->data[5 * i + 1]; + dev->xy_cur[i + 34] = dev->data[5 * i + 3]; + } + + dbg_dump("sample", dev->xy_cur); + + if (!dev->valid) { + /* first sample */ + dev->valid = 1; + dev->x_old = dev->y_old = -1; + memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old)); + + /* 17" Powerbooks have 10 extra X sensors */ + for (i = 16; i < ATP_XSENSORS; i++) + if (dev->xy_cur[i]) { + printk("appletouch: 17\" model detected.\n"); + input_set_abs_params(&dev->input, ABS_X, 0, + (ATP_XSENSORS - 1) * + ATP_XFACT - 1, + ATP_FUZZ, 0); + break; + } + + goto exit; + } + + for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) { + /* accumulate the change */ + signed char change = dev->xy_old[i] - dev->xy_cur[i]; + dev->xy_acc[i] -= change; + + /* prevent down drifting */ + if (dev->xy_acc[i] < 0) + dev->xy_acc[i] = 0; + } + + memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old)); + + dbg_dump("accumulator", dev->xy_acc); + + x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS, + ATP_XFACT, &x_z, &x_f); + y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS, + ATP_YFACT, &y_z, &y_f); + + if (x && y) { + if (dev->x_old != -1) { + x = (dev->x_old * 3 + x) >> 2; + y = (dev->y_old * 3 + y) >> 2; + dev->x_old = x; + dev->y_old = y; + + if (debug > 1) + printk("appletouch: X: %3d Y: %3d " + "Xz: %3d Yz: %3d\n", + x, y, x_z, y_z); + + input_report_key(&dev->input, BTN_TOUCH, 1); + input_report_abs(&dev->input, ABS_X, x); + input_report_abs(&dev->input, ABS_Y, y); + input_report_abs(&dev->input, ABS_PRESSURE, + min(ATP_PRESSURE, x_z + y_z)); + atp_report_fingers(&dev->input, max(x_f, y_f)); + } + dev->x_old = x; + dev->y_old = y; + } + else if (!x && !y) { + + dev->x_old = dev->y_old = -1; + input_report_key(&dev->input, BTN_TOUCH, 0); + input_report_abs(&dev->input, ABS_PRESSURE, 0); + atp_report_fingers(&dev->input, 0); + + /* reset the accumulator on release */ + memset(dev->xy_acc, 0, sizeof(dev->xy_acc)); + } + + input_report_key(&dev->input, BTN_LEFT, !!dev->data[80]); + + input_sync(&dev->input); + +exit: + retval = usb_submit_urb(dev->urb, GFP_ATOMIC); + if (retval) { + err("%s - usb_submit_urb failed with result %d", + __FUNCTION__, retval); + } +} + +static int atp_open(struct input_dev *input) +{ + struct atp *dev = input->private; + + if (usb_submit_urb(dev->urb, GFP_ATOMIC)) + return -EIO; + + dev->open = 1; + return 0; +} + +static void atp_close(struct input_dev *input) +{ + struct atp *dev = input->private; + + usb_kill_urb(dev->urb); + dev->open = 0; +} + +static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id) +{ + struct atp *dev = NULL; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + int int_in_endpointAddr = 0; + int i, retval = -ENOMEM; + + /* allocate memory for our device state and initialize it */ + dev = kmalloc(sizeof(struct atp), GFP_KERNEL); + if (dev == NULL) { + err("Out of memory"); + goto err_kmalloc; + } + memset(dev, 0, sizeof(struct atp)); + + dev->udev = interface_to_usbdev(iface); + + /* set up the endpoint information */ + /* use only the first interrupt-in endpoint */ + iface_desc = iface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { + endpoint = &iface_desc->endpoint[i].desc; + if (!int_in_endpointAddr && + (endpoint->bEndpointAddress & USB_DIR_IN) && + ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_INT)) { + /* we found an interrupt in endpoint */ + int_in_endpointAddr = endpoint->bEndpointAddress; + break; + } + } + if (!int_in_endpointAddr) { + retval = -EIO; + err("Could not find int-in endpoint"); + goto err_endpoint; + } + + /* save our data pointer in this interface device */ + usb_set_intfdata(iface, dev); + + dev->urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->urb) { + retval = -ENOMEM; + goto err_usballoc; + } + dev->data = usb_buffer_alloc(dev->udev, ATP_DATASIZE, GFP_KERNEL, + &dev->urb->transfer_dma); + if (!dev->data) { + retval = -ENOMEM; + goto err_usbbufalloc; + } + usb_fill_int_urb(dev->urb, dev->udev, + usb_rcvintpipe(dev->udev, int_in_endpointAddr), + dev->data, ATP_DATASIZE, atp_complete, dev, 1); + + init_input_dev(&dev->input); + dev->input.name = "appletouch"; + dev->input.dev = &iface->dev; + dev->input.private = dev; + dev->input.open = atp_open; + dev->input.close = atp_close; + + usb_to_input_id(dev->udev, &dev->input.id); + + set_bit(EV_ABS, dev->input.evbit); + + /* + * 12" and 15" Powerbooks only have 16 x sensors, + * 17" models are detected later. + */ + input_set_abs_params(&dev->input, ABS_X, 0, + (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0); + input_set_abs_params(&dev->input, ABS_Y, 0, + (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0); + input_set_abs_params(&dev->input, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0); + + set_bit(EV_KEY, dev->input.evbit); + set_bit(BTN_TOUCH, dev->input.keybit); + set_bit(BTN_TOOL_FINGER, dev->input.keybit); + set_bit(BTN_TOOL_DOUBLETAP, dev->input.keybit); + set_bit(BTN_TOOL_TRIPLETAP, dev->input.keybit); + set_bit(BTN_LEFT, dev->input.keybit); + + input_register_device(&dev->input); + + printk(KERN_INFO "input: appletouch connected\n"); + + return 0; + +err_usbbufalloc: + usb_free_urb(dev->urb); +err_usballoc: + usb_set_intfdata(iface, NULL); +err_endpoint: + kfree(dev); +err_kmalloc: + return retval; +} + +static void atp_disconnect(struct usb_interface *iface) +{ + struct atp *dev = usb_get_intfdata(iface); + + usb_set_intfdata(iface, NULL); + if (dev) { + usb_kill_urb(dev->urb); + input_unregister_device(&dev->input); + usb_free_urb(dev->urb); + usb_buffer_free(dev->udev, ATP_DATASIZE, + dev->data, dev->urb->transfer_dma); + kfree(dev); + } + printk(KERN_INFO "input: appletouch disconnected\n"); +} + +static int atp_suspend(struct usb_interface *iface, pm_message_t message) +{ + struct atp *dev = usb_get_intfdata(iface); + usb_kill_urb(dev->urb); + dev->valid = 0; + return 0; +} + +static int atp_resume(struct usb_interface *iface) +{ + struct atp *dev = usb_get_intfdata(iface); + if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC)) + return -EIO; + + return 0; +} + +static struct usb_driver atp_driver = { + .owner = THIS_MODULE, + .name = "appletouch", + .probe = atp_probe, + .disconnect = atp_disconnect, + .suspend = atp_suspend, + .resume = atp_resume, + .id_table = atp_table, +}; + +static int __init atp_init(void) +{ + return usb_register(&atp_driver); +} + +static void __exit atp_exit(void) +{ + usb_deregister(&atp_driver); +} + +module_init(atp_init); +module_exit(atp_exit); diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index e108e0a36b7..a99865c689c 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1446,7 +1446,6 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_APPLE 0x05ac #define USB_DEVICE_ID_APPLE_POWERMOUSE 0x0304 -#define USB_DEVICE_ID_APPLE_BLUETOOTH 0x1000 /* * Alphabetically sorted blacklist by quirk type. @@ -1465,7 +1464,6 @@ static struct hid_blacklist { { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_22, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_23, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_BLUETOOTH, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24, HID_QUIRK_IGNORE }, diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig index 3957e144caf..7603cbe0865 100644 --- a/drivers/usb/misc/sisusbvga/Kconfig +++ b/drivers/usb/misc/sisusbvga/Kconfig @@ -4,11 +4,43 @@ config USB_SISUSBVGA depends on USB && USB_EHCI_HCD ---help--- Say Y here if you intend to attach a USB2VGA dongle based on a - Net2280 and a SiS315 chip. - - Note that this device requires a USB 2.0 host controller. It will not + Net2280 and a SiS315 chip. + + Note that this device requires a USB 2.0 host controller. It will not work with USB 1.x controllers. - To compile this driver as a module, choose M here: the module will be - called sisusb. If unsure, say N. + To compile this driver as a module, choose M here; the module will be + called sisusbvga. If unsure, say N. + +config USB_SISUSBVGA_CON + bool "Text console and mode switching support" if USB_SISUSBVGA + depends on VT + select FONT_8x16 + ---help--- + Say Y here if you want a VGA text console via the USB dongle or + want to support userland applications that utilize the driver's + display mode switching capabilities. + + Note that this console supports VGA/EGA text mode only. + + By default, the console part of the driver will not kick in when + the driver is initialized. If you want the driver to take over + one or more of the consoles, you need to specify the number of + the first and last consoles (starting at 1) as driver parameters. + + For example, if the driver is compiled as a module: + + modprobe sisusbvga first=1 last=5 + + If you use hotplug, add this to your modutils config files with + the "options" keyword, such as eg. + + options sisusbvga first=1 last=5 + + If the driver is compiled into the kernel image, the parameters + must be given in the kernel command like, such as + + sisusbvga.first=1 sisusbvga.last=5 + + diff --git a/drivers/usb/misc/sisusbvga/Makefile b/drivers/usb/misc/sisusbvga/Makefile index 76f1643ceaf..7f934cfc906 100644 --- a/drivers/usb/misc/sisusbvga/Makefile +++ b/drivers/usb/misc/sisusbvga/Makefile @@ -2,5 +2,7 @@ # Makefile for the sisusb driver (if driver is inside kernel tree). # -obj-$(CONFIG_USB_SISUSBVGA) += sisusb.o +obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga.o + +sisusbvga-objs := sisusb.o sisusb_init.o sisusb_con.o diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index d63ce6c030f..39db3155723 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -1,6 +1,8 @@ /* * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles * + * Main part + * * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria * * If distributed as part of the Linux kernel, this code is licensed under the @@ -48,16 +50,60 @@ #include <linux/kref.h> #include <linux/usb.h> #include <linux/smp_lock.h> +#include <linux/vmalloc.h> #include "sisusb.h" +#ifdef INCL_SISUSB_CON +#include <linux/font.h> +#endif + #define SISUSB_DONTSYNC /* Forward declarations / clean-up routines */ +#ifdef INCL_SISUSB_CON +int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data); +int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 *data); +int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port, u8 index, u8 data); +int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port, u8 index, u8 *data); +int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port, u8 idx, u8 myand, u8 myor); +int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port, u8 index, u8 myor); +int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port, u8 idx, u8 myand); + +int sisusb_writeb(struct sisusb_usb_data *sisusb, u32 adr, u8 data); +int sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data); +int sisusb_writew(struct sisusb_usb_data *sisusb, u32 adr, u16 data); +int sisusb_readw(struct sisusb_usb_data *sisusb, u32 adr, u16 *data); +int sisusb_copy_memory(struct sisusb_usb_data *sisusb, char *src, + u32 dest, int length, size_t *bytes_written); + +int sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init); + +extern int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo); +extern int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo); + +extern void sisusb_init_concode(void); +extern int sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last); +extern void sisusb_console_exit(struct sisusb_usb_data *sisusb); + +extern void sisusb_set_cursor(struct sisusb_usb_data *sisusb, unsigned int location); + +extern int sisusbcon_do_font_op(struct sisusb_usb_data *sisusb, int set, int slot, + u8 *arg, int cmapsz, int ch512, int dorecalc, + struct vc_data *c, int fh, int uplock); + +static int sisusb_first_vc = 0; +static int sisusb_last_vc = 0; +module_param_named(first, sisusb_first_vc, int, 0); +module_param_named(last, sisusb_last_vc, int, 0); +MODULE_PARM_DESC(first, "Number of first console to take over (1 - MAX_NR_CONSOLES)"); +MODULE_PARM_DESC(last, "Number of last console to take over (1 - MAX_NR_CONSOLES)"); +#endif + static struct usb_driver sisusb_driver; -static DECLARE_MUTEX(disconnect_sem); +DECLARE_MUTEX(disconnect_sem); static void sisusb_free_buffers(struct sisusb_usb_data *sisusb) @@ -639,7 +685,10 @@ static int sisusb_send_bridge_packet(struct sisusb_usb_data *sisusb, int len, /* The following routines assume being used to transfer byte, word, * long etc. - * This means that they assume "data" in machine endianness format. + * This means that + * - the write routines expect "data" in machine endianness format. + * The data will be converted to leXX in sisusb_xxx_packet. + * - the read routines can expect read data in machine-endianess. */ static int sisusb_write_memio_byte(struct sisusb_usb_data *sisusb, int type, @@ -839,7 +888,7 @@ static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, if (get_user(swap16, (u16 __user *)userbuffer)) return -EFAULT; } else - swap16 = (kernbuffer[0] << 8) | kernbuffer[1]; + swap16 = *((u16 *)kernbuffer); ret = sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM, @@ -855,14 +904,25 @@ static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, if (userbuffer) { if (copy_from_user(&buf, userbuffer, 3)) return -EFAULT; - +#ifdef __BIG_ENDIAN swap32 = (buf[0] << 16) | (buf[1] << 8) | buf[2]; +#else + swap32 = (buf[2] << 16) | + (buf[1] << 8) | + buf[0]; +#endif } else +#ifdef __BIG_ENDIAN swap32 = (kernbuffer[0] << 16) | (kernbuffer[1] << 8) | kernbuffer[2]; +#else + swap32 = (kernbuffer[2] << 16) | + (kernbuffer[1] << 8) | + kernbuffer[0]; +#endif ret = sisusb_write_memio_24bit(sisusb, SISUSB_TYPE_MEM, @@ -879,10 +939,7 @@ static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, if (get_user(swap32, (u32 __user *)userbuffer)) return -EFAULT; } else - swap32 = (kernbuffer[0] << 24) | - (kernbuffer[1] << 16) | - (kernbuffer[2] << 8) | - kernbuffer[3]; + swap32 = *((u32 *)kernbuffer); ret = sisusb_write_memio_long(sisusb, SISUSB_TYPE_MEM, @@ -1005,6 +1062,10 @@ static int sisusb_write_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, return ret ? -EIO : 0; } +/* Remember: Read data in packet is in machine-endianess! So for + * byte, word, 24bit, long no endian correction is necessary. + */ + static int sisusb_read_memio_byte(struct sisusb_usb_data *sisusb, int type, u32 addr, u8 *data) { @@ -1191,8 +1252,7 @@ static int sisusb_read_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, (u16 __user *)userbuffer)) return -EFAULT; } else { - kernbuffer[0] = swap16 >> 8; - kernbuffer[1] = swap16 & 0xff; + *((u16 *)kernbuffer) = swap16; } } return ret; @@ -1202,9 +1262,15 @@ static int sisusb_read_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, addr, &swap32); if (!ret) { (*bytes_read) += 3; +#ifdef __BIG_ENDIAN buf[0] = (swap32 >> 16) & 0xff; buf[1] = (swap32 >> 8) & 0xff; buf[2] = swap32 & 0xff; +#else + buf[2] = (swap32 >> 16) & 0xff; + buf[1] = (swap32 >> 8) & 0xff; + buf[0] = swap32 & 0xff; +#endif if (userbuffer) { if (copy_to_user(userbuffer, &buf[0], 3)) return -EFAULT; @@ -1228,10 +1294,7 @@ static int sisusb_read_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, userbuffer += 4; } else { - kernbuffer[0] = (swap32 >> 24) & 0xff; - kernbuffer[1] = (swap32 >> 16) & 0xff; - kernbuffer[2] = (swap32 >> 8) & 0xff; - kernbuffer[3] = swap32 & 0xff; + *((u32 *)kernbuffer) = swap32; kernbuffer += 4; } addr += 4; @@ -1289,7 +1352,24 @@ static int sisusb_read_mem_bulk(struct sisusb_usb_data *sisusb, u32 addr, /* High level: Gfx (indexed) register access */ -static int +#ifdef INCL_SISUSB_CON +int +sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data) +{ + return sisusb_write_memio_byte(sisusb, SISUSB_TYPE_IO, port, data); +} + +int +sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 *data) +{ + return sisusb_read_memio_byte(sisusb, SISUSB_TYPE_IO, port, data); +} +#endif + +#ifndef INCL_SISUSB_CON +static +#endif +int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port, u8 index, u8 data) { int ret; @@ -1298,7 +1378,10 @@ sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port, u8 index, u8 data) return ret; } -static int +#ifndef INCL_SISUSB_CON +static +#endif +int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port, u8 index, u8 *data) { int ret; @@ -1307,7 +1390,10 @@ sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port, u8 index, u8 *data) return ret; } -static int +#ifndef INCL_SISUSB_CON +static +#endif +int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port, u8 idx, u8 myand, u8 myor) { @@ -1336,18 +1422,89 @@ sisusb_setidxregmask(struct sisusb_usb_data *sisusb, int port, u8 idx, return ret; } -static int +#ifndef INCL_SISUSB_CON +static +#endif +int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port, u8 index, u8 myor) { return(sisusb_setidxregandor(sisusb, port, index, 0xff, myor)); } -static int +#ifndef INCL_SISUSB_CON +static +#endif +int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port, u8 idx, u8 myand) { return(sisusb_setidxregandor(sisusb, port, idx, myand, 0x00)); } +/* Write/read video ram */ + +#ifdef INCL_SISUSB_CON +int +sisusb_writeb(struct sisusb_usb_data *sisusb, u32 adr, u8 data) +{ + return(sisusb_write_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data)); +} + +int +sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data) +{ + return(sisusb_read_memio_byte(sisusb, SISUSB_TYPE_MEM, adr, data)); +} + +int +sisusb_writew(struct sisusb_usb_data *sisusb, u32 adr, u16 data) +{ + return(sisusb_write_memio_word(sisusb, SISUSB_TYPE_MEM, adr, data)); +} + +int +sisusb_readw(struct sisusb_usb_data *sisusb, u32 adr, u16 *data) +{ + return(sisusb_read_memio_word(sisusb, SISUSB_TYPE_MEM, adr, data)); +} + +int +sisusb_copy_memory(struct sisusb_usb_data *sisusb, char *src, + u32 dest, int length, size_t *bytes_written) +{ + return(sisusb_write_mem_bulk(sisusb, dest, src, length, NULL, 0, bytes_written)); +} + +#ifdef SISUSBENDIANTEST +int +sisusb_read_memory(struct sisusb_usb_data *sisusb, char *dest, + u32 src, int length, size_t *bytes_written) +{ + return(sisusb_read_mem_bulk(sisusb, src, dest, length, NULL, bytes_written)); +} +#endif +#endif + +#ifdef SISUSBENDIANTEST +static void +sisusb_testreadwrite(struct sisusb_usb_data *sisusb) +{ + static char srcbuffer[] = { 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77 }; + char destbuffer[10]; + size_t dummy; + int i,j; + + sisusb_copy_memory(sisusb, srcbuffer, sisusb->vrambase, 7, &dummy); + + for(i = 1; i <= 7; i++) { + printk(KERN_DEBUG "sisusb: rwtest %d bytes\n", i); + sisusb_read_memory(sisusb, destbuffer, sisusb->vrambase, i, &dummy); + for(j = 0; j < i; j++) { + printk(KERN_DEBUG "sisusb: rwtest read[%d] = %x\n", j, destbuffer[j]); + } + } +} +#endif + /* access pci config registers (reg numbers 0, 4, 8, etc) */ static int @@ -2270,6 +2427,129 @@ sisusb_init_gfxdevice(struct sisusb_usb_data *sisusb, int initscreen) return ret; } + +#ifdef INCL_SISUSB_CON + +/* Set up default text mode: + - Set text mode (0x03) + - Upload default font + - Upload user font (if available) +*/ + +int +sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init) +{ + int ret = 0, slot = sisusb->font_slot, i; + struct font_desc *myfont; + u8 *tempbuf; + u16 *tempbufb; + size_t written; + static char bootstring[] = "SiSUSB VGA text console, (C) 2005 Thomas Winischhofer."; + static char bootlogo[] = "(o_ //\\ V_/_"; + + /* sisusb->lock is down */ + + if (!sisusb->SiS_Pr) + return 1; + + sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30; + sisusb->SiS_Pr->sisusb = (void *)sisusb; + + /* Set mode 0x03 */ + SiSUSBSetMode(sisusb->SiS_Pr, 0x03); + + if (!(myfont = find_font("VGA8x16"))) + return 1; + + if (!(tempbuf = vmalloc(8192))) + return 1; + + for (i = 0; i < 256; i++) + memcpy(tempbuf + (i * 32), myfont->data + (i * 16), 16); + + /* Upload default font */ + ret = sisusbcon_do_font_op(sisusb, 1, 0, tempbuf, 8192, 0, 1, NULL, 16, 0); + + vfree(tempbuf); + + /* Upload user font (and reset current slot) */ + if (sisusb->font_backup) { + ret |= sisusbcon_do_font_op(sisusb, 1, 2, sisusb->font_backup, + 8192, sisusb->font_backup_512, 1, NULL, + sisusb->font_backup_height, 0); + if (slot != 2) + sisusbcon_do_font_op(sisusb, 1, 0, NULL, 0, 0, 1, + NULL, 16, 0); + } + + if (init && !sisusb->scrbuf) { + + if ((tempbuf = vmalloc(8192))) { + + i = 4096; + tempbufb = (u16 *)tempbuf; + while (i--) + *(tempbufb++) = 0x0720; + + i = 0; + tempbufb = (u16 *)tempbuf; + while (bootlogo[i]) { + *(tempbufb++) = 0x0700 | bootlogo[i++]; + if (!(i % 4)) + tempbufb += 76; + } + + i = 0; + tempbufb = (u16 *)tempbuf + 6; + while (bootstring[i]) + *(tempbufb++) = 0x0700 | bootstring[i++]; + + ret |= sisusb_copy_memory(sisusb, tempbuf, + sisusb->vrambase, 8192, &written); + + vfree(tempbuf); + + } + + } else if (sisusb->scrbuf) { + + ret |= sisusb_copy_memory(sisusb, (char *)sisusb->scrbuf, + sisusb->vrambase, sisusb->scrbuf_size, &written); + + } + + if (sisusb->sisusb_cursor_size_from >= 0 && + sisusb->sisusb_cursor_size_to >= 0) { + sisusb_setidxreg(sisusb, SISCR, 0x0a, + sisusb->sisusb_cursor_size_from); + sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0xe0, + sisusb->sisusb_cursor_size_to); + } else { + sisusb_setidxreg(sisusb, SISCR, 0x0a, 0x2d); + sisusb_setidxreg(sisusb, SISCR, 0x0b, 0x0e); + sisusb->sisusb_cursor_size_to = -1; + } + + slot = sisusb->sisusb_cursor_loc; + if(slot < 0) slot = 0; + + sisusb->sisusb_cursor_loc = -1; + sisusb->bad_cursor_pos = 1; + + sisusb_set_cursor(sisusb, slot); + + sisusb_setidxreg(sisusb, SISCR, 0x0c, (sisusb->cur_start_addr >> 8)); + sisusb_setidxreg(sisusb, SISCR, 0x0d, (sisusb->cur_start_addr & 0xff)); + + sisusb->textmodedestroyed = 0; + + /* sisusb->lock is down */ + + return ret; +} + +#endif + /* fops */ static int @@ -2329,7 +2609,7 @@ sisusb_open(struct inode *inode, struct file *file) } } - /* increment usage count for the device */ + /* Increment usage count for our sisusb */ kref_get(&sisusb->kref); sisusb->isopen = 1; @@ -2340,12 +2620,10 @@ sisusb_open(struct inode *inode, struct file *file) up(&disconnect_sem); - printk(KERN_DEBUG "sisusbvga[%d]: opened", sisusb->minor); - return 0; } -static void +void sisusb_delete(struct kref *kref) { struct sisusb_usb_data *sisusb = to_sisusb_dev(kref); @@ -2359,6 +2637,9 @@ sisusb_delete(struct kref *kref) sisusb->sisusb_dev = NULL; sisusb_free_buffers(sisusb); sisusb_free_urbs(sisusb); +#ifdef INCL_SISUSB_CON + kfree(sisusb->SiS_Pr); +#endif kfree(sisusb); } @@ -2395,8 +2676,6 @@ sisusb_release(struct inode *inode, struct file *file) up(&disconnect_sem); - printk(KERN_DEBUG "sisusbvga[%d]: released", myminor); - return 0; } @@ -2733,6 +3012,12 @@ sisusb_handle_command(struct sisusb_usb_data *sisusb, struct sisusb_command *y, int retval, port, length; u32 address; + /* All our commands require the device + * to be initialized. + */ + if (!sisusb->devinit) + return -ENODEV; + port = y->data3 - SISUSB_PCI_PSEUDO_IOPORTBASE + SISUSB_PCI_IOPORTBASE; @@ -2774,6 +3059,10 @@ sisusb_handle_command(struct sisusb_usb_data *sisusb, struct sisusb_command *y, break; case SUCMD_CLRSCR: + /* Gfx core must be initialized */ + if (!sisusb->gfxinit) + return -ENODEV; + length = (y->data0 << 16) | (y->data1 << 8) | y->data2; address = y->data3 - SISUSB_PCI_PSEUDO_MEMBASE + @@ -2781,11 +3070,61 @@ sisusb_handle_command(struct sisusb_usb_data *sisusb, struct sisusb_command *y, retval = sisusb_clear_vram(sisusb, address, length); break; + case SUCMD_HANDLETEXTMODE: + retval = 0; +#ifdef INCL_SISUSB_CON + /* Gfx core must be initialized, SiS_Pr must exist */ + if (!sisusb->gfxinit || !sisusb->SiS_Pr) + return -ENODEV; + + switch (y->data0) { + case 0: + retval = sisusb_reset_text_mode(sisusb, 0); + break; + case 1: + sisusb->textmodedestroyed = 1; + break; + } +#endif + break; + +#ifdef INCL_SISUSB_CON + case SUCMD_SETMODE: + /* Gfx core must be initialized, SiS_Pr must exist */ + if (!sisusb->gfxinit || !sisusb->SiS_Pr) + return -ENODEV; + + retval = 0; + + sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30; + sisusb->SiS_Pr->sisusb = (void *)sisusb; + + if (SiSUSBSetMode(sisusb->SiS_Pr, y->data3)) + retval = -EINVAL; + + break; + + case SUCMD_SETVESAMODE: + /* Gfx core must be initialized, SiS_Pr must exist */ + if (!sisusb->gfxinit || !sisusb->SiS_Pr) + return -ENODEV; + + retval = 0; + + sisusb->SiS_Pr->IOAddress = SISUSB_PCI_IOPORTBASE + 0x30; + sisusb->SiS_Pr->sisusb = (void *)sisusb; + + if (SiSUSBSetVESAMode(sisusb->SiS_Pr, y->data3)) + retval = -EINVAL; + + break; +#endif + default: retval = -EINVAL; } - if(retval > 0) + if (retval > 0) retval = -EIO; return retval; @@ -2835,6 +3174,11 @@ sisusb_ioctl(struct inode *inode, struct file *file, unsigned int cmd, x.sisusb_vramsize = sisusb->vramsize; x.sisusb_minor = sisusb->minor; x.sisusb_fbdevactive= 0; +#ifdef INCL_SISUSB_CON + x.sisusb_conactive = sisusb->haveconsole ? 1 : 0; +#else + x.sisusb_conactive = 0; +#endif if (copy_to_user((void __user *)arg, &x, sizeof(x))) retval = -EFAULT; @@ -2895,9 +3239,13 @@ static struct file_operations usb_sisusb_fops = { }; static struct usb_class_driver usb_sisusb_class = { +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13) .name = "usb/sisusbvga%d", - .fops = &usb_sisusb_fops, .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP, +#else + .name = "sisusbvga%d", +#endif + .fops = &usb_sisusb_fops, .minor_base = SISUSB_MINOR }; @@ -2994,12 +3342,25 @@ static int sisusb_probe(struct usb_interface *intf, printk(KERN_INFO "sisusbvga[%d]: Allocated %d output buffers\n", sisusb->minor, sisusb->numobufs); +#ifdef INCL_SISUSB_CON + /* Allocate our SiS_Pr */ + if (!(sisusb->SiS_Pr = kmalloc(sizeof(struct SiS_Private), GFP_KERNEL))) { + printk(KERN_ERR + "sisusbvga[%d]: Failed to allocate SiS_Pr\n", + sisusb->minor); + } +#endif + /* Do remaining init stuff */ init_waitqueue_head(&sisusb->wait_q); usb_set_intfdata(intf, sisusb); + usb_get_dev(sisusb->sisusb_dev); + + sisusb->present = 1; + #ifdef SISUSB_OLD_CONFIG_COMPAT { int ret; @@ -3014,14 +3375,19 @@ static int sisusb_probe(struct usb_interface *intf, sisusb->minor); else sisusb->ioctl32registered = 1; - } #endif - sisusb->present = 1; - if (dev->speed == USB_SPEED_HIGH) { - if (sisusb_init_gfxdevice(sisusb, 1)) + int initscreen = 1; +#ifdef INCL_SISUSB_CON + if (sisusb_first_vc > 0 && + sisusb_last_vc > 0 && + sisusb_first_vc <= sisusb_last_vc && + sisusb_last_vc <= MAX_NR_CONSOLES) + initscreen = 0; +#endif + if (sisusb_init_gfxdevice(sisusb, initscreen)) printk(KERN_ERR "sisusbvga[%d]: Failed to early " "initialize device\n", @@ -3035,6 +3401,16 @@ static int sisusb_probe(struct usb_interface *intf, sisusb->ready = 1; +#ifdef SISUSBENDIANTEST + printk(KERN_DEBUG "sisusb: *** RWTEST ***\n"); + sisusb_testreadwrite(sisusb); + printk(KERN_DEBUG "sisusb: *** RWTEST END ***\n"); +#endif + +#ifdef INCL_SISUSB_CON + sisusb_console_init(sisusb, sisusb_first_vc, sisusb_last_vc); +#endif + return 0; error_4: @@ -3053,13 +3429,20 @@ static void sisusb_disconnect(struct usb_interface *intf) struct sisusb_usb_data *sisusb; int minor; - down(&disconnect_sem); - /* This should *not* happen */ - if (!(sisusb = usb_get_intfdata(intf))) { - up(&disconnect_sem); + if (!(sisusb = usb_get_intfdata(intf))) return; - } + +#ifdef INCL_SISUSB_CON + sisusb_console_exit(sisusb); +#endif + + /* The above code doesn't need the disconnect + * semaphore to be down; its meaning is to + * protect all other routines from the disconnect + * case, not the other way round. + */ + down(&disconnect_sem); down(&sisusb->lock); @@ -3123,11 +3506,17 @@ static int __init usb_sisusb_init(void) { int retval; +#ifdef INCL_SISUSB_CON + sisusb_init_concode(); +#endif + if (!(retval = usb_register(&sisusb_driver))) { + printk(KERN_INFO "sisusb: Driver version %d.%d.%d\n", SISUSB_VERSION, SISUSB_REVISION, SISUSB_PATCHLEVEL); printk(KERN_INFO "sisusb: Copyright (C) 2005 Thomas Winischhofer\n"); + } return retval; @@ -3142,6 +3531,6 @@ module_init(usb_sisusb_init); module_exit(usb_sisusb_exit); MODULE_AUTHOR("Thomas Winischhofer <thomas@winischhofer.net>"); -MODULE_DESCRIPTION("sisusb - Driver for Net2280/SiS315-based USB2VGA dongles"); +MODULE_DESCRIPTION("sisusbvga - Driver for Net2280/SiS315-based USB2VGA dongles"); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/misc/sisusbvga/sisusb.h b/drivers/usb/misc/sisusbvga/sisusb.h index 1306d006a25..401ff21d788 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.h +++ b/drivers/usb/misc/sisusbvga/sisusb.h @@ -46,15 +46,36 @@ #endif #endif +/* For older kernels, support for text consoles is by default + * off. To ensable text console support, change the following: + */ +#if 0 +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13) +#define CONFIG_USB_SISUSBVGA_CON +#endif +#endif + /* Version Information */ #define SISUSB_VERSION 0 #define SISUSB_REVISION 0 -#define SISUSB_PATCHLEVEL 7 +#define SISUSB_PATCHLEVEL 8 + +/* Include console and mode switching code? */ + +#ifdef CONFIG_USB_SISUSBVGA_CON +#define INCL_SISUSB_CON 1 +#endif + +#ifdef INCL_SISUSB_CON +#include <linux/console.h> +#include <linux/vt_kern.h> +#include "sisusb_struct.h" +#endif /* USB related */ -#define SISUSB_MINOR 133 /* FIXME */ +#define SISUSB_MINOR 133 /* official */ /* Size of the sisusb input/output buffers */ #define SISUSB_IBUF_SIZE 0x01000 @@ -131,6 +152,26 @@ struct sisusb_usb_data { unsigned char gfxinit; /* graphics core initialized? */ unsigned short chipid, chipvendor; unsigned short chiprevision; +#ifdef INCL_SISUSB_CON + struct SiS_Private *SiS_Pr; + unsigned long scrbuf; + unsigned int scrbuf_size; + int haveconsole, con_first, con_last; + int havethisconsole[MAX_NR_CONSOLES]; + int textmodedestroyed; + unsigned int sisusb_num_columns; /* real number, not vt's idea */ + int cur_start_addr, con_rolled_over; + int sisusb_cursor_loc, bad_cursor_pos; + int sisusb_cursor_size_from; + int sisusb_cursor_size_to; + int current_font_height, current_font_512; + int font_backup_size, font_backup_height, font_backup_512; + char *font_backup; + int font_slot; + struct vc_data *sisusb_display_fg; + int is_gfx; + int con_blanked; +#endif }; #define to_sisusb_dev(d) container_of(d, struct sisusb_usb_data, kref) @@ -249,7 +290,9 @@ struct sisusb_info { __u32 sisusb_fbdevactive; /* != 0 if framebuffer device active */ - __u8 sisusb_reserved[32]; /* for future use */ + __u32 sisusb_conactive; /* != 0 if console driver active */ + + __u8 sisusb_reserved[28]; /* for future use */ }; struct sisusb_command { @@ -261,18 +304,24 @@ struct sisusb_command { __u32 data4; /* for future use */ }; -#define SUCMD_GET 0x01 /* for all: data0 = index, data3 = port */ -#define SUCMD_SET 0x02 /* data1 = value */ -#define SUCMD_SETOR 0x03 /* data1 = or */ -#define SUCMD_SETAND 0x04 /* data1 = and */ -#define SUCMD_SETANDOR 0x05 /* data1 = and, data2 = or */ -#define SUCMD_SETMASK 0x06 /* data1 = data, data2 = mask */ +#define SUCMD_GET 0x01 /* for all: data0 = index, data3 = port */ +#define SUCMD_SET 0x02 /* data1 = value */ +#define SUCMD_SETOR 0x03 /* data1 = or */ +#define SUCMD_SETAND 0x04 /* data1 = and */ +#define SUCMD_SETANDOR 0x05 /* data1 = and, data2 = or */ +#define SUCMD_SETMASK 0x06 /* data1 = data, data2 = mask */ -#define SUCMD_CLRSCR 0x07 /* data0:1:2 = length, data3 = address */ +#define SUCMD_CLRSCR 0x07 /* data0:1:2 = length, data3 = address */ + +#define SUCMD_HANDLETEXTMODE 0x08 /* Reset/destroy text mode */ + +#define SUCMD_SETMODE 0x09 /* Set a display mode (data3 = SiS mode) */ +#define SUCMD_SETVESAMODE 0x0a /* Set a display mode (data3 = VESA mode) */ #define SISUSB_COMMAND _IOWR(0xF3,0x3D,struct sisusb_command) -#define SISUSB_GET_CONFIG_SIZE _IOR(0xF3,0x3E,__u32) -#define SISUSB_GET_CONFIG _IOR(0xF3,0x3F,struct sisusb_info) +#define SISUSB_GET_CONFIG_SIZE _IOR(0xF3,0x3E,__u32) +#define SISUSB_GET_CONFIG _IOR(0xF3,0x3F,struct sisusb_info) + #endif /* SISUSB_H */ diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c new file mode 100644 index 00000000000..24584463553 --- /dev/null +++ b/drivers/usb/misc/sisusbvga/sisusb_con.c @@ -0,0 +1,1658 @@ +/* + * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles + * + * VGA text mode console part + * + * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria + * + * If distributed as part of the Linux kernel, this code is licensed under the + * terms of the GPL v2. + * + * Otherwise, the following license terms apply: + * + * * Redistribution and use in source and binary forms, with or without + * * modification, are permitted provided that the following conditions + * * are met: + * * 1) Redistributions of source code must retain the above copyright + * * notice, this list of conditions and the following disclaimer. + * * 2) Redistributions in binary form must reproduce the above copyright + * * notice, this list of conditions and the following disclaimer in the + * * documentation and/or other materials provided with the distribution. + * * 3) The name of the author may not be used to endorse or promote products + * * derived from this software without specific psisusbr written permission. + * * + * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR + * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Author: Thomas Winischhofer <thomas@winischhofer.net> + * + * Portions based on vgacon.c which are + * Created 28 Sep 1997 by Geert Uytterhoeven + * Rewritten by Martin Mares <mj@ucw.cz>, July 1998 + * based on code Copyright (C) 1991, 1992 Linus Torvalds + * 1995 Jay Estabrook + * + * A note on using in_atomic() in here: We can't handle console + * calls from non-schedulable context due to our USB-dependend + * nature. For now, this driver just ignores any calls if it + * detects this state. + * + */ + +#include <linux/config.h> +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/fs.h> +#include <linux/tty.h> +#include <linux/console.h> +#include <linux/string.h> +#include <linux/kd.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/vt_kern.h> +#include <linux/selection.h> +#include <linux/spinlock.h> +#include <linux/kref.h> +#include <linux/smp_lock.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/vmalloc.h> + +#include "sisusb.h" + +#ifdef INCL_SISUSB_CON +extern int sisusb_setreg(struct sisusb_usb_data *, int, u8); +extern int sisusb_getreg(struct sisusb_usb_data *, int, u8 *); +extern int sisusb_setidxreg(struct sisusb_usb_data *, int, u8, u8); +extern int sisusb_getidxreg(struct sisusb_usb_data *, int, u8, u8 *); +extern int sisusb_setidxregor(struct sisusb_usb_data *, int, u8, u8); +extern int sisusb_setidxregand(struct sisusb_usb_data *, int, u8, u8); +extern int sisusb_setidxregandor(struct sisusb_usb_data *, int, u8, u8, u8); + +extern int sisusb_writeb(struct sisusb_usb_data *sisusb, u32 adr, u8 data); +extern int sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data); +extern int sisusb_writew(struct sisusb_usb_data *sisusb, u32 adr, u16 data); +extern int sisusb_readw(struct sisusb_usb_data *sisusb, u32 adr, u16 *data); +extern int sisusb_copy_memory(struct sisusb_usb_data *sisusb, char *src, + u32 dest, int length, size_t *bytes_written); + +extern void sisusb_delete(struct kref *kref); +extern int sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init); + +extern int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo); + +#define sisusbcon_writew(val, addr) (*(addr) = (val)) +#define sisusbcon_readw(addr) (*(addr)) +#define sisusbcon_memmovew(d, s, c) memmove(d, s, c) +#define sisusbcon_memcpyw(d, s, c) memcpy(d, s, c) + +/* vc_data -> sisusb conversion table */ +static struct sisusb_usb_data *mysisusbs[MAX_NR_CONSOLES]; + +/* Forward declaration */ +static const struct consw sisusb_con; + +extern struct semaphore disconnect_sem; + +static inline void +sisusbcon_memsetw(u16 *s, u16 c, unsigned int count) +{ + count /= 2; + while (count--) + sisusbcon_writew(c, s++); +} + +static inline void +sisusb_initialize(struct sisusb_usb_data *sisusb) +{ + /* Reset cursor and start address */ + if (sisusb_setidxreg(sisusb, SISCR, 0x0c, 0x00)) + return; + if (sisusb_setidxreg(sisusb, SISCR, 0x0d, 0x00)) + return; + if (sisusb_setidxreg(sisusb, SISCR, 0x0e, 0x00)) + return; + sisusb_setidxreg(sisusb, SISCR, 0x0f, 0x00); +} + +static inline void +sisusbcon_set_start_address(struct sisusb_usb_data *sisusb, struct vc_data *c) +{ + sisusb->cur_start_addr = (c->vc_visible_origin - sisusb->scrbuf) / 2; + + sisusb_setidxreg(sisusb, SISCR, 0x0c, (sisusb->cur_start_addr >> 8)); + sisusb_setidxreg(sisusb, SISCR, 0x0d, (sisusb->cur_start_addr & 0xff)); +} + +void +sisusb_set_cursor(struct sisusb_usb_data *sisusb, unsigned int location) +{ + if (sisusb->sisusb_cursor_loc == location) + return; + + sisusb->sisusb_cursor_loc = location; + + /* Hardware bug: Text cursor appears twice or not at all + * at some positions. Work around it with the cursor skew + * bits. + */ + + if ((location & 0x0007) == 0x0007) { + sisusb->bad_cursor_pos = 1; + location--; + if (sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0x1f, 0x20)) + return; + } else if (sisusb->bad_cursor_pos) { + if (sisusb_setidxregand(sisusb, SISCR, 0x0b, 0x1f)) + return; + sisusb->bad_cursor_pos = 0; + } + + if (sisusb_setidxreg(sisusb, SISCR, 0x0e, (location >> 8))) + return; + sisusb_setidxreg(sisusb, SISCR, 0x0f, (location & 0xff)); +} + +static inline struct sisusb_usb_data * +sisusb_get_sisusb(unsigned short console) +{ + return mysisusbs[console]; +} + +static inline int +sisusb_sisusb_valid(struct sisusb_usb_data *sisusb) +{ + if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) + return 0; + + return 1; +} + +static struct sisusb_usb_data * +sisusb_get_sisusb_lock_and_check(unsigned short console) +{ + struct sisusb_usb_data *sisusb; + + /* We can't handle console calls in non-schedulable + * context due to our locks and the USB transport. + * So we simply ignore them. This should only affect + * some calls to printk. + */ + if (in_atomic()) + return NULL; + + if (!(sisusb = sisusb_get_sisusb(console))) + return NULL; + + down(&sisusb->lock); + + if (!sisusb_sisusb_valid(sisusb) || + !sisusb->havethisconsole[console]) { + up(&sisusb->lock); + return NULL; + } + + return sisusb; +} + +static int +sisusb_is_inactive(struct vc_data *c, struct sisusb_usb_data *sisusb) +{ + if (sisusb->is_gfx || + sisusb->textmodedestroyed || + c->vc_mode != KD_TEXT) + return 1; + + return 0; +} + +/* con_startup console interface routine */ +static const char * +sisusbcon_startup(void) +{ + return "SISUSBCON"; +} + +/* con_init console interface routine */ +static void +sisusbcon_init(struct vc_data *c, int init) +{ + struct sisusb_usb_data *sisusb; + int cols, rows; + + /* This is called by take_over_console(), + * ie by us/under our control. It is + * only called after text mode and fonts + * are set up/restored. + */ + + down(&disconnect_sem); + + if (!(sisusb = sisusb_get_sisusb(c->vc_num))) { + up(&disconnect_sem); + return; + } + + down(&sisusb->lock); + + if (!sisusb_sisusb_valid(sisusb)) { + up(&sisusb->lock); + up(&disconnect_sem); + return; + } + + c->vc_can_do_color = 1; + + c->vc_complement_mask = 0x7700; + + c->vc_hi_font_mask = sisusb->current_font_512 ? 0x0800 : 0; + + sisusb->haveconsole = 1; + + sisusb->havethisconsole[c->vc_num] = 1; + + /* We only support 640x400 */ + c->vc_scan_lines = 400; + + c->vc_font.height = sisusb->current_font_height; + + /* We only support width = 8 */ + cols = 80; + rows = c->vc_scan_lines / c->vc_font.height; + + /* Increment usage count for our sisusb. + * Doing so saves us from upping/downing + * the disconnect semaphore; we can't + * lose our sisusb until this is undone + * in con_deinit. For all other console + * interface functions, it suffices to + * use sisusb->lock and do a quick check + * of sisusb for device disconnection. + */ + kref_get(&sisusb->kref); + + if (!*c->vc_uni_pagedir_loc) + con_set_default_unimap(c); + + up(&sisusb->lock); + + up(&disconnect_sem); + + if (init) { + c->vc_cols = cols; + c->vc_rows = rows; + } else + vc_resize(c, cols, rows); +} + +/* con_deinit console interface routine */ +static void +sisusbcon_deinit(struct vc_data *c) +{ + struct sisusb_usb_data *sisusb; + int i; + + /* This is called by take_over_console() + * and others, ie not under our control. + */ + + down(&disconnect_sem); + + if (!(sisusb = sisusb_get_sisusb(c->vc_num))) { + up(&disconnect_sem); + return; + } + + down(&sisusb->lock); + + /* Clear ourselves in mysisusbs */ + mysisusbs[c->vc_num] = NULL; + + sisusb->havethisconsole[c->vc_num] = 0; + + /* Free our font buffer if all consoles are gone */ + if (sisusb->font_backup) { + for(i = 0; i < MAX_NR_CONSOLES; i++) { + if (sisusb->havethisconsole[c->vc_num]) + break; + } + if (i == MAX_NR_CONSOLES) { + vfree(sisusb->font_backup); + sisusb->font_backup = NULL; + } + } + + up(&sisusb->lock); + + /* decrement the usage count on our sisusb */ + kref_put(&sisusb->kref, sisusb_delete); + + up(&disconnect_sem); +} + +/* interface routine */ +static u8 +sisusbcon_build_attr(struct vc_data *c, u8 color, u8 intensity, + u8 blink, u8 underline, u8 reverse) +{ + u8 attr = color; + + if (underline) + attr = (attr & 0xf0) | c->vc_ulcolor; + else if (intensity == 0) + attr = (attr & 0xf0) | c->vc_halfcolor; + + if (reverse) + attr = ((attr) & 0x88) | + ((((attr) >> 4) | + ((attr) << 4)) & 0x77); + + if (blink) + attr ^= 0x80; + + if (intensity == 2) + attr ^= 0x08; + + return attr; +} + +/* Interface routine */ +static void +sisusbcon_invert_region(struct vc_data *vc, u16 *p, int count) +{ + /* Invert a region. This is called with a pointer + * to the console's internal screen buffer. So we + * simply do the inversion there and rely on + * a call to putc(s) to update the real screen. + */ + + while (count--) { + u16 a = sisusbcon_readw(p); + + a = ((a) & 0x88ff) | + (((a) & 0x7000) >> 4) | + (((a) & 0x0700) << 4); + + sisusbcon_writew(a, p++); + } +} + +#define SISUSB_VADDR(x,y) \ + ((u16 *)c->vc_origin + \ + (y) * sisusb->sisusb_num_columns + \ + (x)) + +#define SISUSB_HADDR(x,y) \ + ((u16 *)(sisusb->vrambase + (c->vc_origin - sisusb->scrbuf)) + \ + (y) * sisusb->sisusb_num_columns + \ + (x)) + +/* Interface routine */ +static void +sisusbcon_putc(struct vc_data *c, int ch, int y, int x) +{ + struct sisusb_usb_data *sisusb; + ssize_t written; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return; + + /* sisusb->lock is down */ + + /* Don't need to put the character into buffer ourselves, + * because the vt does this BEFORE calling us. + */ +#if 0 + sisusbcon_writew(ch, SISUSB_VADDR(x, y)); +#endif + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return; + } + + + sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y), + (u32)SISUSB_HADDR(x, y), 2, &written); + + up(&sisusb->lock); +} + +/* Interface routine */ +static void +sisusbcon_putcs(struct vc_data *c, const unsigned short *s, + int count, int y, int x) +{ + struct sisusb_usb_data *sisusb; + ssize_t written; + u16 *dest; + int i; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return; + + /* sisusb->lock is down */ + + /* Need to put the characters into the buffer ourselves, + * because the vt does this AFTER calling us. + */ + + dest = SISUSB_VADDR(x, y); + + for (i = count; i > 0; i--) + sisusbcon_writew(sisusbcon_readw(s++), dest++); + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return; + } + + sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y), + (u32)SISUSB_HADDR(x, y), count * 2, &written); + + up(&sisusb->lock); +} + +/* Interface routine */ +static void +sisusbcon_clear(struct vc_data *c, int y, int x, int height, int width) +{ + struct sisusb_usb_data *sisusb; + u16 eattr = c->vc_video_erase_char; + ssize_t written; + int i, length, cols; + u16 *dest; + + if (width <= 0 || height <= 0) + return; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return; + + /* sisusb->lock is down */ + + /* Need to clear buffer ourselves, because the vt does + * this AFTER calling us. + */ + + dest = SISUSB_VADDR(x, y); + + cols = sisusb->sisusb_num_columns; + + if (width > cols) + width = cols; + + if (x == 0 && width >= c->vc_cols) { + + sisusbcon_memsetw(dest, eattr, height * cols * 2); + + } else { + + for (i = height; i > 0; i--, dest += cols) + sisusbcon_memsetw(dest, eattr, width * 2); + + } + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return; + } + + length = ((height * cols) - x - (cols - width - x)) * 2; + + + sisusb_copy_memory(sisusb, (unsigned char *)SISUSB_VADDR(x, y), + (u32)SISUSB_HADDR(x, y), length, &written); + + up(&sisusb->lock); +} + +/* Interface routine */ +static void +sisusbcon_bmove(struct vc_data *c, int sy, int sx, + int dy, int dx, int height, int width) +{ + struct sisusb_usb_data *sisusb; + ssize_t written; + int cols, length; +#if 0 + u16 *src, *dest; + int i; +#endif + + if (width <= 0 || height <= 0) + return; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return; + + /* sisusb->lock is down */ + + cols = sisusb->sisusb_num_columns; + + /* Don't need to move data outselves, because + * vt does this BEFORE calling us. + * This is only used by vt's insert/deletechar. + */ +#if 0 + if (sx == 0 && dx == 0 && width >= c->vc_cols && width <= cols) { + + sisusbcon_memmovew(SISUSB_VADDR(0, dy), SISUSB_VADDR(0, sy), + height * width * 2); + + } else if (dy < sy || (dy == sy && dx < sx)) { + + src = SISUSB_VADDR(sx, sy); + dest = SISUSB_VADDR(dx, dy); + + for (i = height; i > 0; i--) { + sisusbcon_memmovew(dest, src, width * 2); + src += cols; + dest += cols; + } + + } else { + + src = SISUSB_VADDR(sx, sy + height - 1); + dest = SISUSB_VADDR(dx, dy + height - 1); + + for (i = height; i > 0; i--) { + sisusbcon_memmovew(dest, src, width * 2); + src -= cols; + dest -= cols; + } + + } +#endif + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return; + } + + length = ((height * cols) - dx - (cols - width - dx)) * 2; + + + sisusb_copy_memory(sisusb, (unsigned char *)SISUSB_VADDR(dx, dy), + (u32)SISUSB_HADDR(dx, dy), length, &written); + + up(&sisusb->lock); +} + +/* interface routine */ +static int +sisusbcon_switch(struct vc_data *c) +{ + struct sisusb_usb_data *sisusb; + ssize_t written; + int length; + + /* Returnvalue 0 means we have fully restored screen, + * and vt doesn't need to call do_update_region(). + * Returnvalue != 0 naturally means the opposite. + */ + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return 0; + + /* sisusb->lock is down */ + + /* Don't write to screen if in gfx mode */ + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return 0; + } + + /* That really should not happen. It would mean we are + * being called while the vc is using its private buffer + * as origin. + */ + if (c->vc_origin == (unsigned long)c->vc_screenbuf) { + up(&sisusb->lock); + printk(KERN_DEBUG "sisusb: ASSERT ORIGIN != SCREENBUF!\n"); + return 0; + } + + /* Check that we don't copy too much */ + length = min((int)c->vc_screenbuf_size, + (int)(sisusb->scrbuf + sisusb->scrbuf_size - c->vc_origin)); + + /* Restore the screen contents */ + sisusbcon_memcpyw((u16 *)c->vc_origin, (u16 *)c->vc_screenbuf, + length); + + sisusb_copy_memory(sisusb, (unsigned char *)c->vc_origin, + (u32)SISUSB_HADDR(0, 0), + length, &written); + + up(&sisusb->lock); + + return 0; +} + +/* interface routine */ +static void +sisusbcon_save_screen(struct vc_data *c) +{ + struct sisusb_usb_data *sisusb; + int length; + + /* Save the current screen contents to vc's private + * buffer. + */ + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return; + + /* sisusb->lock is down */ + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return; + } + + /* Check that we don't copy too much */ + length = min((int)c->vc_screenbuf_size, + (int)(sisusb->scrbuf + sisusb->scrbuf_size - c->vc_origin)); + + /* Save the screen contents to vc's private buffer */ + sisusbcon_memcpyw((u16 *)c->vc_screenbuf, (u16 *)c->vc_origin, + length); + + up(&sisusb->lock); +} + +/* interface routine */ +static int +sisusbcon_set_palette(struct vc_data *c, unsigned char *table) +{ + struct sisusb_usb_data *sisusb; + int i, j; + + /* Return value not used by vt */ + + if (!CON_IS_VISIBLE(c)) + return -EINVAL; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return -EINVAL; + + /* sisusb->lock is down */ + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return -EINVAL; + } + + for (i = j = 0; i < 16; i++) { + if (sisusb_setreg(sisusb, SISCOLIDX, table[i])) + break; + if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2)) + break; + if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2)) + break; + if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2)) + break; + } + + up(&sisusb->lock); + + return 0; +} + +/* interface routine */ +static int +sisusbcon_blank(struct vc_data *c, int blank, int mode_switch) +{ + struct sisusb_usb_data *sisusb; + u8 sr1, cr17, pmreg, cr63; + ssize_t written; + int ret = 0; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return 0; + + /* sisusb->lock is down */ + + if (mode_switch) + sisusb->is_gfx = blank ? 1 : 0; + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return 0; + } + + switch (blank) { + + case 1: /* Normal blanking: Clear screen */ + case -1: + sisusbcon_memsetw((u16 *)c->vc_origin, + c->vc_video_erase_char, + c->vc_screenbuf_size); + sisusb_copy_memory(sisusb, + (unsigned char *)c->vc_origin, + (u32)(sisusb->vrambase + + (c->vc_origin - sisusb->scrbuf)), + c->vc_screenbuf_size, &written); + sisusb->con_blanked = 1; + ret = 1; + break; + + default: /* VESA blanking */ + switch (blank) { + case 0: /* Unblank */ + sr1 = 0x00; + cr17 = 0x80; + pmreg = 0x00; + cr63 = 0x00; + ret = 1; + sisusb->con_blanked = 0; + break; + case VESA_VSYNC_SUSPEND + 1: + sr1 = 0x20; + cr17 = 0x80; + pmreg = 0x80; + cr63 = 0x40; + break; + case VESA_HSYNC_SUSPEND + 1: + sr1 = 0x20; + cr17 = 0x80; + pmreg = 0x40; + cr63 = 0x40; + break; + case VESA_POWERDOWN + 1: + sr1 = 0x20; + cr17 = 0x00; + pmreg = 0xc0; + cr63 = 0x40; + break; + default: + up(&sisusb->lock); + return -EINVAL; + } + + sisusb_setidxregandor(sisusb, SISSR, 0x01, ~0x20, sr1); + sisusb_setidxregandor(sisusb, SISCR, 0x17, 0x7f, cr17); + sisusb_setidxregandor(sisusb, SISSR, 0x1f, 0x3f, pmreg); + sisusb_setidxregandor(sisusb, SISCR, 0x63, 0xbf, cr63); + + } + + up(&sisusb->lock); + + return ret; +} + +/* interface routine */ +static int +sisusbcon_scrolldelta(struct vc_data *c, int lines) +{ + struct sisusb_usb_data *sisusb; + int margin = c->vc_size_row * 4; + int ul, we, p, st; + + /* The return value does not seem to be used */ + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return 0; + + /* sisusb->lock is down */ + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return 0; + } + + if (!lines) /* Turn scrollback off */ + c->vc_visible_origin = c->vc_origin; + else { + + if (sisusb->con_rolled_over > + (c->vc_scr_end - sisusb->scrbuf) + margin) { + + ul = c->vc_scr_end - sisusb->scrbuf; + we = sisusb->con_rolled_over + c->vc_size_row; + + } else { + + ul = 0; + we = sisusb->scrbuf_size; + + } + + p = (c->vc_visible_origin - sisusb->scrbuf - ul + we) % we + + lines * c->vc_size_row; + + st = (c->vc_origin - sisusb->scrbuf - ul + we) % we; + + if (st < 2 * margin) + margin = 0; + + if (p < margin) + p = 0; + + if (p > st - margin) + p = st; + + c->vc_visible_origin = sisusb->scrbuf + (p + ul) % we; + } + + sisusbcon_set_start_address(sisusb, c); + + up(&sisusb->lock); + + return 1; +} + +/* Interface routine */ +static void +sisusbcon_cursor(struct vc_data *c, int mode) +{ + struct sisusb_usb_data *sisusb; + int from, to, baseline; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return; + + /* sisusb->lock is down */ + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return; + } + + if (c->vc_origin != c->vc_visible_origin) { + c->vc_visible_origin = c->vc_origin; + sisusbcon_set_start_address(sisusb, c); + } + + if (mode == CM_ERASE) { + sisusb_setidxregor(sisusb, SISCR, 0x0a, 0x20); + sisusb->sisusb_cursor_size_to = -1; + up(&sisusb->lock); + return; + } + + sisusb_set_cursor(sisusb, (c->vc_pos - sisusb->scrbuf) / 2); + + baseline = c->vc_font.height - (c->vc_font.height < 10 ? 1 : 2); + + switch (c->vc_cursor_type & 0x0f) { + case CUR_BLOCK: from = 1; + to = c->vc_font.height; + break; + case CUR_TWO_THIRDS: from = c->vc_font.height / 3; + to = baseline; + break; + case CUR_LOWER_HALF: from = c->vc_font.height / 2; + to = baseline; + break; + case CUR_LOWER_THIRD: from = (c->vc_font.height * 2) / 3; + to = baseline; + break; + case CUR_NONE: from = 31; + to = 30; + break; + default: + case CUR_UNDERLINE: from = baseline - 1; + to = baseline; + break; + } + + if (sisusb->sisusb_cursor_size_from != from || + sisusb->sisusb_cursor_size_to != to) { + + sisusb_setidxreg(sisusb, SISCR, 0x0a, from); + sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0xe0, to); + + sisusb->sisusb_cursor_size_from = from; + sisusb->sisusb_cursor_size_to = to; + } + + up(&sisusb->lock); +} + +static int +sisusbcon_scroll_area(struct vc_data *c, struct sisusb_usb_data *sisusb, + int t, int b, int dir, int lines) +{ + int cols = sisusb->sisusb_num_columns; + int length = ((b - t) * cols) * 2; + u16 eattr = c->vc_video_erase_char; + ssize_t written; + + /* sisusb->lock is down */ + + /* Scroll an area which does not match the + * visible screen's dimensions. This needs + * to be done separately, as it does not + * use hardware panning. + */ + + switch (dir) { + + case SM_UP: + sisusbcon_memmovew(SISUSB_VADDR(0, t), + SISUSB_VADDR(0, t + lines), + (b - t - lines) * cols * 2); + sisusbcon_memsetw(SISUSB_VADDR(0, b - lines), eattr, + lines * cols * 2); + break; + + case SM_DOWN: + sisusbcon_memmovew(SISUSB_VADDR(0, t + lines), + SISUSB_VADDR(0, t), + (b - t - lines) * cols * 2); + sisusbcon_memsetw(SISUSB_VADDR(0, t), eattr, + lines * cols * 2); + break; + } + + sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(0, t), + (u32)SISUSB_HADDR(0, t), length, &written); + + up(&sisusb->lock); + + return 1; +} + +/* Interface routine */ +static int +sisusbcon_scroll(struct vc_data *c, int t, int b, int dir, int lines) +{ + struct sisusb_usb_data *sisusb; + u16 eattr = c->vc_video_erase_char; + ssize_t written; + int copyall = 0; + unsigned long oldorigin; + unsigned int delta = lines * c->vc_size_row; + u32 originoffset; + + /* Returning != 0 means we have done the scrolling successfully. + * Returning 0 makes vt do the scrolling on its own. + * Note that con_scroll is only called if the console is + * visible. In that case, the origin should be our buffer, + * not the vt's private one. + */ + + if (!lines) + return 1; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return 0; + + /* sisusb->lock is down */ + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return 0; + } + + /* Special case */ + if (t || b != c->vc_rows) + return sisusbcon_scroll_area(c, sisusb, t, b, dir, lines); + + if (c->vc_origin != c->vc_visible_origin) { + c->vc_visible_origin = c->vc_origin; + sisusbcon_set_start_address(sisusb, c); + } + + /* limit amount to maximum realistic size */ + if (lines > c->vc_rows) + lines = c->vc_rows; + + oldorigin = c->vc_origin; + + switch (dir) { + + case SM_UP: + + if (c->vc_scr_end + delta >= + sisusb->scrbuf + sisusb->scrbuf_size) { + sisusbcon_memcpyw((u16 *)sisusb->scrbuf, + (u16 *)(oldorigin + delta), + c->vc_screenbuf_size - delta); + c->vc_origin = sisusb->scrbuf; + sisusb->con_rolled_over = oldorigin - sisusb->scrbuf; + copyall = 1; + } else + c->vc_origin += delta; + + sisusbcon_memsetw( + (u16 *)(c->vc_origin + c->vc_screenbuf_size - delta), + eattr, delta); + + break; + + case SM_DOWN: + + if (oldorigin - delta < sisusb->scrbuf) { + sisusbcon_memmovew((u16 *)(sisusb->scrbuf + + sisusb->scrbuf_size - + c->vc_screenbuf_size + + delta), + (u16 *)oldorigin, + c->vc_screenbuf_size - delta); + c->vc_origin = sisusb->scrbuf + + sisusb->scrbuf_size - + c->vc_screenbuf_size; + sisusb->con_rolled_over = 0; + copyall = 1; + } else + c->vc_origin -= delta; + + c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size; + + scr_memsetw((u16 *)(c->vc_origin), eattr, delta); + + break; + } + + originoffset = (u32)(c->vc_origin - sisusb->scrbuf); + + if (copyall) + sisusb_copy_memory(sisusb, + (char *)c->vc_origin, + (u32)(sisusb->vrambase + originoffset), + c->vc_screenbuf_size, &written); + else if (dir == SM_UP) + sisusb_copy_memory(sisusb, + (char *)c->vc_origin + c->vc_screenbuf_size - delta, + (u32)sisusb->vrambase + originoffset + + c->vc_screenbuf_size - delta, + delta, &written); + else + sisusb_copy_memory(sisusb, + (char *)c->vc_origin, + (u32)(sisusb->vrambase + originoffset), + delta, &written); + + c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size; + c->vc_visible_origin = c->vc_origin; + + sisusbcon_set_start_address(sisusb, c); + + c->vc_pos = c->vc_pos - oldorigin + c->vc_origin; + + up(&sisusb->lock); + + return 1; +} + +/* Interface routine */ +static int +sisusbcon_set_origin(struct vc_data *c) +{ + struct sisusb_usb_data *sisusb; + + /* Returning != 0 means we were successful. + * Returning 0 will vt make to use its own + * screenbuffer as the origin. + */ + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return 0; + + /* sisusb->lock is down */ + + if (sisusb_is_inactive(c, sisusb) || sisusb->con_blanked) { + up(&sisusb->lock); + return 0; + } + + c->vc_origin = c->vc_visible_origin = sisusb->scrbuf; + + sisusbcon_set_start_address(sisusb, c); + + sisusb->con_rolled_over = 0; + + up(&sisusb->lock); + + return 1; +} + +/* Interface routine */ +static int +sisusbcon_resize(struct vc_data *c, unsigned int newcols, unsigned int newrows) +{ + struct sisusb_usb_data *sisusb; + int fh; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return -ENODEV; + + fh = sisusb->current_font_height; + + up(&sisusb->lock); + + /* We are quite unflexible as regards resizing. The vt code + * handles sizes where the line length isn't equal the pitch + * quite badly. As regards the rows, our panning tricks only + * work well if the number of rows equals the visible number + * of rows. + */ + + if (newcols != 80 || c->vc_scan_lines / fh != newrows) + return -EINVAL; + + return 0; +} + +int +sisusbcon_do_font_op(struct sisusb_usb_data *sisusb, int set, int slot, + u8 *arg, int cmapsz, int ch512, int dorecalc, + struct vc_data *c, int fh, int uplock) +{ + int font_select = 0x00, i, err = 0; + u32 offset = 0; + u8 dummy; + + /* sisusb->lock is down */ + + /* + * The default font is kept in slot 0. + * A user font is loaded in slot 2 (256 ch) + * or 2+3 (512 ch). + */ + + if ((slot != 0 && slot != 2) || !fh) { + if (uplock) + up(&sisusb->lock); + return -EINVAL; + } + + if (set) + sisusb->font_slot = slot; + + /* Default font is always 256 */ + if (slot == 0) + ch512 = 0; + else + offset = 4 * cmapsz; + + font_select = (slot == 0) ? 0x00 : (ch512 ? 0x0e : 0x0a); + + err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x01); /* Reset */ + err |= sisusb_setidxreg(sisusb, SISSR, 0x02, 0x04); /* Write to plane 2 */ + err |= sisusb_setidxreg(sisusb, SISSR, 0x04, 0x07); /* Memory mode a0-bf */ + err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x03); /* Reset */ + + if (err) + goto font_op_error; + + err |= sisusb_setidxreg(sisusb, SISGR, 0x04, 0x03); /* Select plane read 2 */ + err |= sisusb_setidxreg(sisusb, SISGR, 0x05, 0x00); /* Disable odd/even */ + err |= sisusb_setidxreg(sisusb, SISGR, 0x06, 0x00); /* Address range a0-bf */ + + if (err) + goto font_op_error; + + if (arg) { + if (set) + for (i = 0; i < cmapsz; i++) { + err |= sisusb_writeb(sisusb, + sisusb->vrambase + offset + i, + arg[i]); + if (err) + break; + } + else + for (i = 0; i < cmapsz; i++) { + err |= sisusb_readb(sisusb, + sisusb->vrambase + offset + i, + &arg[i]); + if (err) + break; + } + + /* + * In 512-character mode, the character map is not contiguous if + * we want to remain EGA compatible -- which we do + */ + + if (ch512) { + if (set) + for (i = 0; i < cmapsz; i++) { + err |= sisusb_writeb(sisusb, + sisusb->vrambase + offset + + (2 * cmapsz) + i, + arg[cmapsz + i]); + if (err) + break; + } + else + for (i = 0; i < cmapsz; i++) { + err |= sisusb_readb(sisusb, + sisusb->vrambase + offset + + (2 * cmapsz) + i, + &arg[cmapsz + i]); + if (err) + break; + } + } + } + + if (err) + goto font_op_error; + + err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x01); /* Reset */ + err |= sisusb_setidxreg(sisusb, SISSR, 0x02, 0x03); /* Write to planes 0+1 */ + err |= sisusb_setidxreg(sisusb, SISSR, 0x04, 0x03); /* Memory mode a0-bf */ + if (set) + sisusb_setidxreg(sisusb, SISSR, 0x03, font_select); + err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x03); /* Reset end */ + + if (err) + goto font_op_error; + + err |= sisusb_setidxreg(sisusb, SISGR, 0x04, 0x00); /* Select plane read 0 */ + err |= sisusb_setidxreg(sisusb, SISGR, 0x05, 0x10); /* Enable odd/even */ + err |= sisusb_setidxreg(sisusb, SISGR, 0x06, 0x06); /* Address range b8-bf */ + + if (err) + goto font_op_error; + + if ((set) && (ch512 != sisusb->current_font_512)) { + + /* Font is shared among all our consoles. + * And so is the hi_font_mask. + */ + for (i = 0; i < MAX_NR_CONSOLES; i++) { + struct vc_data *c = vc_cons[i].d; + if (c && c->vc_sw == &sisusb_con) + c->vc_hi_font_mask = ch512 ? 0x0800 : 0; + } + + sisusb->current_font_512 = ch512; + + /* color plane enable register: + 256-char: enable intensity bit + 512-char: disable intensity bit */ + sisusb_getreg(sisusb, SISINPSTAT, &dummy); + sisusb_setreg(sisusb, SISAR, 0x12); + sisusb_setreg(sisusb, SISAR, ch512 ? 0x07 : 0x0f); + + sisusb_getreg(sisusb, SISINPSTAT, &dummy); + sisusb_setreg(sisusb, SISAR, 0x20); + sisusb_getreg(sisusb, SISINPSTAT, &dummy); + } + + if (dorecalc) { + + /* + * Adjust the screen to fit a font of a certain height + */ + + unsigned char ovr, vde, fsr; + int rows = 0, maxscan = 0; + + if (c) { + + /* Number of video rows */ + rows = c->vc_scan_lines / fh; + /* Scan lines to actually display-1 */ + maxscan = rows * fh - 1; + + /*printk(KERN_DEBUG "sisusb recalc rows %d maxscan %d fh %d sl %d\n", + rows, maxscan, fh, c->vc_scan_lines);*/ + + sisusb_getidxreg(sisusb, SISCR, 0x07, &ovr); + vde = maxscan & 0xff; + ovr = (ovr & 0xbd) | + ((maxscan & 0x100) >> 7) | + ((maxscan & 0x200) >> 3); + sisusb_setidxreg(sisusb, SISCR, 0x07, ovr); + sisusb_setidxreg(sisusb, SISCR, 0x12, vde); + + } + + sisusb_getidxreg(sisusb, SISCR, 0x09, &fsr); + fsr = (fsr & 0xe0) | (fh - 1); + sisusb_setidxreg(sisusb, SISCR, 0x09, fsr); + sisusb->current_font_height = fh; + + sisusb->sisusb_cursor_size_from = -1; + sisusb->sisusb_cursor_size_to = -1; + + } + + if (uplock) + up(&sisusb->lock); + + if (dorecalc && c) { + int i, rows = c->vc_scan_lines / fh; + + /* Now adjust our consoles' size */ + + for (i = 0; i < MAX_NR_CONSOLES; i++) { + struct vc_data *vc = vc_cons[i].d; + + if (vc && vc->vc_sw == &sisusb_con) { + if (CON_IS_VISIBLE(vc)) { + vc->vc_sw->con_cursor(vc, CM_DRAW); + } + vc->vc_font.height = fh; + vc_resize(vc, 0, rows); + } + } + } + + return 0; + +font_op_error: + if (uplock) + up(&sisusb->lock); + + return -EIO; +} + +/* Interface routine */ +static int +sisusbcon_font_set(struct vc_data *c, struct console_font *font, + unsigned flags) +{ + struct sisusb_usb_data *sisusb; + unsigned charcount = font->charcount; + + if (font->width != 8 || (charcount != 256 && charcount != 512)) + return -EINVAL; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return -ENODEV; + + /* sisusb->lock is down */ + + /* Save the user-provided font into a buffer. This + * is used for restoring text mode after quitting + * from X and for the con_getfont routine. + */ + if (sisusb->font_backup) { + if (sisusb->font_backup_size < charcount) { + vfree(sisusb->font_backup); + sisusb->font_backup = NULL; + } + } + + if (!sisusb->font_backup) + sisusb->font_backup = vmalloc(charcount * 32); + + if (sisusb->font_backup) { + memcpy(sisusb->font_backup, font->data, charcount * 32); + sisusb->font_backup_size = charcount; + sisusb->font_backup_height = font->height; + sisusb->font_backup_512 = (charcount == 512) ? 1 : 0; + } + + /* do_font_op ups sisusb->lock */ + + return sisusbcon_do_font_op(sisusb, 1, 2, font->data, + 8192, (charcount == 512), + (!(flags & KD_FONT_FLAG_DONT_RECALC)) ? 1 : 0, + c, font->height, 1); +} + +/* Interface routine */ +static int +sisusbcon_font_get(struct vc_data *c, struct console_font *font) +{ + struct sisusb_usb_data *sisusb; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return -ENODEV; + + /* sisusb->lock is down */ + + font->width = 8; + font->height = c->vc_font.height; + font->charcount = 256; + + if (!font->data) { + up(&sisusb->lock); + return 0; + } + + if (!sisusb->font_backup) { + up(&sisusb->lock); + return -ENODEV; + } + + /* Copy 256 chars only, like vgacon */ + memcpy(font->data, sisusb->font_backup, 256 * 32); + + up(&sisusb->lock); + + return 0; +} + +/* + * The console `switch' structure for the sisusb console + */ + +static const struct consw sisusb_con = { + .owner = THIS_MODULE, + .con_startup = sisusbcon_startup, + .con_init = sisusbcon_init, + .con_deinit = sisusbcon_deinit, + .con_clear = sisusbcon_clear, + .con_putc = sisusbcon_putc, + .con_putcs = sisusbcon_putcs, + .con_cursor = sisusbcon_cursor, + .con_scroll = sisusbcon_scroll, + .con_bmove = sisusbcon_bmove, + .con_switch = sisusbcon_switch, + .con_blank = sisusbcon_blank, + .con_font_set = sisusbcon_font_set, + .con_font_get = sisusbcon_font_get, + .con_set_palette = sisusbcon_set_palette, + .con_scrolldelta = sisusbcon_scrolldelta, + .con_build_attr = sisusbcon_build_attr, + .con_invert_region = sisusbcon_invert_region, + .con_set_origin = sisusbcon_set_origin, + .con_save_screen = sisusbcon_save_screen, + .con_resize = sisusbcon_resize, +}; + +/* Our very own dummy console driver */ + +static const char *sisusbdummycon_startup(void) +{ + return "SISUSBVGADUMMY"; +} + +static void sisusbdummycon_init(struct vc_data *vc, int init) +{ + vc->vc_can_do_color = 1; + if (init) { + vc->vc_cols = 80; + vc->vc_rows = 25; + } else + vc_resize(vc, 80, 25); +} + +static int sisusbdummycon_dummy(void) +{ + return 0; +} + +#define SISUSBCONDUMMY (void *)sisusbdummycon_dummy + +const struct consw sisusb_dummy_con = { + .owner = THIS_MODULE, + .con_startup = sisusbdummycon_startup, + .con_init = sisusbdummycon_init, + .con_deinit = SISUSBCONDUMMY, + .con_clear = SISUSBCONDUMMY, + .con_putc = SISUSBCONDUMMY, + .con_putcs = SISUSBCONDUMMY, + .con_cursor = SISUSBCONDUMMY, + .con_scroll = SISUSBCONDUMMY, + .con_bmove = SISUSBCONDUMMY, + .con_switch = SISUSBCONDUMMY, + .con_blank = SISUSBCONDUMMY, + .con_font_set = SISUSBCONDUMMY, + .con_font_get = SISUSBCONDUMMY, + .con_font_default = SISUSBCONDUMMY, + .con_font_copy = SISUSBCONDUMMY, + .con_set_palette = SISUSBCONDUMMY, + .con_scrolldelta = SISUSBCONDUMMY, +}; + +int +sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last) +{ + int i, ret, minor = sisusb->minor; + + down(&disconnect_sem); + + down(&sisusb->lock); + + /* Erm.. that should not happen */ + if (sisusb->haveconsole || !sisusb->SiS_Pr) { + up(&sisusb->lock); + up(&disconnect_sem); + return 1; + } + + sisusb->con_first = first; + sisusb->con_last = last; + + if (first > last || + first > MAX_NR_CONSOLES || + last > MAX_NR_CONSOLES) { + up(&sisusb->lock); + up(&disconnect_sem); + return 1; + } + + /* If gfxcore not initialized or no consoles given, quit graciously */ + if (!sisusb->gfxinit || first < 1 || last < 1) { + up(&sisusb->lock); + up(&disconnect_sem); + return 0; + } + + sisusb->sisusb_cursor_loc = -1; + sisusb->sisusb_cursor_size_from = -1; + sisusb->sisusb_cursor_size_to = -1; + + /* Set up text mode (and upload default font) */ + if (sisusb_reset_text_mode(sisusb, 1)) { + up(&sisusb->lock); + up(&disconnect_sem); + printk(KERN_ERR + "sisusbvga[%d]: Failed to set up text mode\n", + minor); + return 1; + } + + /* Initialize some gfx registers */ + sisusb_initialize(sisusb); + + for (i = first - 1; i <= last - 1; i++) { + /* Save sisusb for our interface routines */ + mysisusbs[i] = sisusb; + } + + /* Initial console setup */ + sisusb->sisusb_num_columns = 80; + + /* Use a 32K buffer (matches b8000-bffff area) */ + sisusb->scrbuf_size = 32 * 1024; + + /* Allocate screen buffer */ + if (!(sisusb->scrbuf = (unsigned long)vmalloc(sisusb->scrbuf_size))) { + up(&sisusb->lock); + up(&disconnect_sem); + printk(KERN_ERR + "sisusbvga[%d]: Failed to allocate screen buffer\n", + minor); + return 1; + } + + up(&sisusb->lock); + up(&disconnect_sem); + + /* Now grab the desired console(s) */ + ret = take_over_console(&sisusb_con, first - 1, last - 1, 0); + + if (!ret) + sisusb->haveconsole = 1; + else { + for (i = first - 1; i <= last - 1; i++) + mysisusbs[i] = NULL; + } + + return ret; +} + +void +sisusb_console_exit(struct sisusb_usb_data *sisusb) +{ + int i; + + /* This is called if the device is disconnected + * and while disconnect and lock semaphores + * are up. This should be save because we + * can't lose our sisusb any other way but by + * disconnection (and hence, the disconnect + * sema is for protecting all other access + * functions from disconnection, not the + * other way round). + */ + + /* Now what do we do in case of disconnection: + * One alternative would be to simply call + * give_up_console(). Nah, not a good idea. + * give_up_console() is obviously buggy as it + * only discards the consw pointer from the + * driver_map, but doesn't adapt vc->vc_sw + * of the affected consoles. Hence, the next + * call to any of the console functions will + * eventually take a trip to oops county. + * Also, give_up_console for some reason + * doesn't decrement our module refcount. + * Instead, we switch our consoles to a private + * dummy console. This, of course, keeps our + * refcount up as well, but it works perfectly. + */ + + if (sisusb->haveconsole) { + for (i = 0; i < MAX_NR_CONSOLES; i++) + if (sisusb->havethisconsole[i]) + take_over_console(&sisusb_dummy_con, i, i, 0); + /* At this point, con_deinit for all our + * consoles is executed by take_over_console(). + */ + sisusb->haveconsole = 0; + } + + vfree((void *)sisusb->scrbuf); + sisusb->scrbuf = 0; + + vfree(sisusb->font_backup); + sisusb->font_backup = NULL; +} + +void __init sisusb_init_concode(void) +{ + int i; + + for (i = 0; i < MAX_NR_CONSOLES; i++) + mysisusbs[i] = NULL; +} + +#endif /* INCL_CON */ + + + diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.c b/drivers/usb/misc/sisusbvga/sisusb_init.c new file mode 100644 index 00000000000..f28bc240f9b --- /dev/null +++ b/drivers/usb/misc/sisusbvga/sisusb_init.c @@ -0,0 +1,1047 @@ +/* + * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles + * + * Display mode initializing code + * + * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria + * + * If distributed as part of the Linux kernel, this code is licensed under the + * terms of the GPL v2. + * + * Otherwise, the following license terms apply: + * + * * Redistribution and use in source and binary forms, with or without + * * modification, are permitted provided that the following conditions + * * are met: + * * 1) Redistributions of source code must retain the above copyright + * * notice, this list of conditions and the following disclaimer. + * * 2) Redistributions in binary form must reproduce the above copyright + * * notice, this list of conditions and the following disclaimer in the + * * documentation and/or other materials provided with the distribution. + * * 3) The name of the author may not be used to endorse or promote products + * * derived from this software without specific prior written permission. + * * + * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Author: Thomas Winischhofer <thomas@winischhofer.net> + * + */ + +#include <linux/config.h> +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/poll.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/kref.h> + +#include "sisusb.h" + +#ifdef INCL_SISUSB_CON + +#include "sisusb_init.h" + +/*********************************************/ +/* POINTER INITIALIZATION */ +/*********************************************/ + +static void +SiSUSB_InitPtr(struct SiS_Private *SiS_Pr) +{ + SiS_Pr->SiS_ModeResInfo = SiSUSB_ModeResInfo; + SiS_Pr->SiS_StandTable = SiSUSB_StandTable; + + SiS_Pr->SiS_SModeIDTable = SiSUSB_SModeIDTable; + SiS_Pr->SiS_EModeIDTable = SiSUSB_EModeIDTable; + SiS_Pr->SiS_RefIndex = SiSUSB_RefIndex; + SiS_Pr->SiS_CRT1Table = SiSUSB_CRT1Table; + + SiS_Pr->SiS_VCLKData = SiSUSB_VCLKData; +} + +/*********************************************/ +/* HELPER: Get ModeID */ +/*********************************************/ + +unsigned short +SiSUSB_GetModeID(int HDisplay, int VDisplay, int Depth) +{ + unsigned short ModeIndex = 0; + + switch (HDisplay) + { + case 320: + if (VDisplay == 200) + ModeIndex = ModeIndex_320x200[Depth]; + else if (VDisplay == 240) + ModeIndex = ModeIndex_320x240[Depth]; + break; + case 400: + if (VDisplay == 300) + ModeIndex = ModeIndex_400x300[Depth]; + break; + case 512: + if (VDisplay == 384) + ModeIndex = ModeIndex_512x384[Depth]; + break; + case 640: + if (VDisplay == 480) + ModeIndex = ModeIndex_640x480[Depth]; + else if (VDisplay == 400) + ModeIndex = ModeIndex_640x400[Depth]; + break; + case 720: + if (VDisplay == 480) + ModeIndex = ModeIndex_720x480[Depth]; + else if (VDisplay == 576) + ModeIndex = ModeIndex_720x576[Depth]; + break; + case 768: + if (VDisplay == 576) + ModeIndex = ModeIndex_768x576[Depth]; + break; + case 800: + if (VDisplay == 600) + ModeIndex = ModeIndex_800x600[Depth]; + else if (VDisplay == 480) + ModeIndex = ModeIndex_800x480[Depth]; + break; + case 848: + if (VDisplay == 480) + ModeIndex = ModeIndex_848x480[Depth]; + break; + case 856: + if (VDisplay == 480) + ModeIndex = ModeIndex_856x480[Depth]; + break; + case 960: + if (VDisplay == 540) + ModeIndex = ModeIndex_960x540[Depth]; + else if (VDisplay == 600) + ModeIndex = ModeIndex_960x600[Depth]; + break; + case 1024: + if (VDisplay == 576) + ModeIndex = ModeIndex_1024x576[Depth]; + else if (VDisplay == 768) + ModeIndex = ModeIndex_1024x768[Depth]; + break; + case 1152: + if (VDisplay == 864) + ModeIndex = ModeIndex_1152x864[Depth]; + break; + case 1280: + switch (VDisplay) { + case 720: + ModeIndex = ModeIndex_1280x720[Depth]; + break; + case 768: + ModeIndex = ModeIndex_1280x768[Depth]; + break; + case 1024: + ModeIndex = ModeIndex_1280x1024[Depth]; + break; + } + } + + return ModeIndex; +} + +/*********************************************/ +/* HELPER: SetReg, GetReg */ +/*********************************************/ + +static void +SiS_SetReg(struct SiS_Private *SiS_Pr, unsigned long port, + unsigned short index, unsigned short data) +{ + sisusb_setidxreg(SiS_Pr->sisusb, port, index, data); +} + +static void +SiS_SetRegByte(struct SiS_Private *SiS_Pr, unsigned long port, + unsigned short data) +{ + sisusb_setreg(SiS_Pr->sisusb, port, data); +} + +static unsigned char +SiS_GetReg(struct SiS_Private *SiS_Pr, unsigned long port, + unsigned short index) +{ + u8 data; + + sisusb_getidxreg(SiS_Pr->sisusb, port, index, &data); + + return data; +} + +static unsigned char +SiS_GetRegByte(struct SiS_Private *SiS_Pr, unsigned long port) +{ + u8 data; + + sisusb_getreg(SiS_Pr->sisusb, port, &data); + + return data; +} + +static void +SiS_SetRegANDOR(struct SiS_Private *SiS_Pr, unsigned long port, + unsigned short index, unsigned short DataAND, + unsigned short DataOR) +{ + sisusb_setidxregandor(SiS_Pr->sisusb, port, index, DataAND, DataOR); +} + +static void +SiS_SetRegAND(struct SiS_Private *SiS_Pr, unsigned long port, + unsigned short index, unsigned short DataAND) +{ + sisusb_setidxregand(SiS_Pr->sisusb, port, index, DataAND); +} + +static void +SiS_SetRegOR(struct SiS_Private *SiS_Pr,unsigned long port, + unsigned short index, unsigned short DataOR) +{ + sisusb_setidxregor(SiS_Pr->sisusb, port, index, DataOR); +} + +/*********************************************/ +/* HELPER: DisplayOn, DisplayOff */ +/*********************************************/ + +static void +SiS_DisplayOn(struct SiS_Private *SiS_Pr) +{ + SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x01, 0xDF); +} + +/*********************************************/ +/* HELPER: Init Port Addresses */ +/*********************************************/ + +void +SiSUSBRegInit(struct SiS_Private *SiS_Pr, unsigned long BaseAddr) +{ + SiS_Pr->SiS_P3c4 = BaseAddr + 0x14; + SiS_Pr->SiS_P3d4 = BaseAddr + 0x24; + SiS_Pr->SiS_P3c0 = BaseAddr + 0x10; + SiS_Pr->SiS_P3ce = BaseAddr + 0x1e; + SiS_Pr->SiS_P3c2 = BaseAddr + 0x12; + SiS_Pr->SiS_P3ca = BaseAddr + 0x1a; + SiS_Pr->SiS_P3c6 = BaseAddr + 0x16; + SiS_Pr->SiS_P3c7 = BaseAddr + 0x17; + SiS_Pr->SiS_P3c8 = BaseAddr + 0x18; + SiS_Pr->SiS_P3c9 = BaseAddr + 0x19; + SiS_Pr->SiS_P3cb = BaseAddr + 0x1b; + SiS_Pr->SiS_P3cc = BaseAddr + 0x1c; + SiS_Pr->SiS_P3cd = BaseAddr + 0x1d; + SiS_Pr->SiS_P3da = BaseAddr + 0x2a; + SiS_Pr->SiS_Part1Port = BaseAddr + SIS_CRT2_PORT_04; +} + +/*********************************************/ +/* HELPER: GetSysFlags */ +/*********************************************/ + +static void +SiS_GetSysFlags(struct SiS_Private *SiS_Pr) +{ + SiS_Pr->SiS_MyCR63 = 0x63; +} + +/*********************************************/ +/* HELPER: Init PCI & Engines */ +/*********************************************/ + +static void +SiSInitPCIetc(struct SiS_Private *SiS_Pr) +{ + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x20, 0xa1); + /* - Enable 2D (0x40) + * - Enable 3D (0x02) + * - Enable 3D vertex command fetch (0x10) + * - Enable 3D command parser (0x08) + * - Enable 3D G/L transformation engine (0x80) + */ + SiS_SetRegOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x1E, 0xDA); +} + +/*********************************************/ +/* HELPER: SET SEGMENT REGISTERS */ +/*********************************************/ + +static void +SiS_SetSegRegLower(struct SiS_Private *SiS_Pr, unsigned short value) +{ + unsigned short temp; + + value &= 0x00ff; + temp = SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3cb) & 0xf0; + temp |= (value >> 4); + SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cb, temp); + temp = SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd) & 0xf0; + temp |= (value & 0x0f); + SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd, temp); +} + +static void +SiS_SetSegRegUpper(struct SiS_Private *SiS_Pr, unsigned short value) +{ + unsigned short temp; + + value &= 0x00ff; + temp = SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3cb) & 0x0f; + temp |= (value & 0xf0); + SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cb, temp); + temp = SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd) & 0x0f; + temp |= (value << 4); + SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3cd, temp); +} + +static void +SiS_SetSegmentReg(struct SiS_Private *SiS_Pr, unsigned short value) +{ + SiS_SetSegRegLower(SiS_Pr, value); + SiS_SetSegRegUpper(SiS_Pr, value); +} + +static void +SiS_ResetSegmentReg(struct SiS_Private *SiS_Pr) +{ + SiS_SetSegmentReg(SiS_Pr, 0); +} + +static void +SiS_SetSegmentRegOver(struct SiS_Private *SiS_Pr, unsigned short value) +{ + unsigned short temp = value >> 8; + + temp &= 0x07; + temp |= (temp << 4); + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x1d, temp); + SiS_SetSegmentReg(SiS_Pr, value); +} + +static void +SiS_ResetSegmentRegOver(struct SiS_Private *SiS_Pr) +{ + SiS_SetSegmentRegOver(SiS_Pr, 0); +} + +static void +SiS_ResetSegmentRegisters(struct SiS_Private *SiS_Pr) +{ + SiS_ResetSegmentReg(SiS_Pr); + SiS_ResetSegmentRegOver(SiS_Pr); +} + +/*********************************************/ +/* HELPER: SearchModeID */ +/*********************************************/ + +static int +SiS_SearchModeID(struct SiS_Private *SiS_Pr, unsigned short *ModeNo, + unsigned short *ModeIdIndex) +{ + if ((*ModeNo) <= 0x13) { + + if ((*ModeNo) != 0x03) + return 0; + + (*ModeIdIndex) = 0; + + } else { + + for(*ModeIdIndex = 0; ;(*ModeIdIndex)++) { + + if (SiS_Pr->SiS_EModeIDTable[*ModeIdIndex].Ext_ModeID == (*ModeNo)) + break; + + if (SiS_Pr->SiS_EModeIDTable[*ModeIdIndex].Ext_ModeID == 0xFF) + return 0; + } + + } + + return 1; +} + +/*********************************************/ +/* HELPER: ENABLE CRT1 */ +/*********************************************/ + +static void +SiS_HandleCRT1(struct SiS_Private *SiS_Pr) +{ + /* Enable CRT1 gating */ + SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4, SiS_Pr->SiS_MyCR63, 0xbf); +} + +/*********************************************/ +/* HELPER: GetColorDepth */ +/*********************************************/ + +static unsigned short +SiS_GetColorDepth(struct SiS_Private *SiS_Pr, unsigned short ModeNo, + unsigned short ModeIdIndex) +{ + static const unsigned short ColorDepth[6] = { 1, 2, 4, 4, 6, 8}; + unsigned short modeflag; + short index; + + if (ModeNo <= 0x13) { + modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; + } else { + modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; + } + + index = (modeflag & ModeTypeMask) - ModeEGA; + if (index < 0) index = 0; + return ColorDepth[index]; +} + +/*********************************************/ +/* HELPER: GetOffset */ +/*********************************************/ + +static unsigned short +SiS_GetOffset(struct SiS_Private *SiS_Pr, unsigned short ModeNo, + unsigned short ModeIdIndex, unsigned short rrti) +{ + unsigned short xres, temp, colordepth, infoflag; + + infoflag = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag; + xres = SiS_Pr->SiS_RefIndex[rrti].XRes; + + colordepth = SiS_GetColorDepth(SiS_Pr, ModeNo, ModeIdIndex); + + temp = xres / 16; + + if (infoflag & InterlaceMode) + temp <<= 1; + + temp *= colordepth; + + if (xres % 16) + temp += (colordepth >> 1); + + return temp; +} + +/*********************************************/ +/* SEQ */ +/*********************************************/ + +static void +SiS_SetSeqRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex) +{ + unsigned char SRdata; + int i; + + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x00, 0x03); + + SRdata = SiS_Pr->SiS_StandTable[StandTableIndex].SR[0] | 0x20; + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x01, SRdata); + + for(i = 2; i <= 4; i++) { + SRdata = SiS_Pr->SiS_StandTable[StandTableIndex].SR[i-1]; + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, i, SRdata); + } +} + +/*********************************************/ +/* MISC */ +/*********************************************/ + +static void +SiS_SetMiscRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex) +{ + unsigned char Miscdata = SiS_Pr->SiS_StandTable[StandTableIndex].MISC; + + SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c2, Miscdata); +} + +/*********************************************/ +/* CRTC */ +/*********************************************/ + +static void +SiS_SetCRTCRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex) +{ + unsigned char CRTCdata; + unsigned short i; + + SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4, 0x11, 0x7f); + + for(i = 0; i <= 0x18; i++) { + CRTCdata = SiS_Pr->SiS_StandTable[StandTableIndex].CRTC[i]; + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, i, CRTCdata); + } +} + +/*********************************************/ +/* ATT */ +/*********************************************/ + +static void +SiS_SetATTRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex) +{ + unsigned char ARdata; + unsigned short i; + + for(i = 0; i <= 0x13; i++) { + ARdata = SiS_Pr->SiS_StandTable[StandTableIndex].ATTR[i]; + SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3da); + SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, i); + SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, ARdata); + } + SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3da); + SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, 0x14); + SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, 0x00); + + SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3da); + SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c0, 0x20); + SiS_GetRegByte(SiS_Pr, SiS_Pr->SiS_P3da); +} + +/*********************************************/ +/* GRC */ +/*********************************************/ + +static void +SiS_SetGRCRegs(struct SiS_Private *SiS_Pr, unsigned short StandTableIndex) +{ + unsigned char GRdata; + unsigned short i; + + for(i = 0; i <= 0x08; i++) { + GRdata = SiS_Pr->SiS_StandTable[StandTableIndex].GRC[i]; + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3ce, i, GRdata); + } + + if (SiS_Pr->SiS_ModeType > ModeVGA) { + /* 256 color disable */ + SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3ce, 0x05, 0xBF); + } +} + +/*********************************************/ +/* CLEAR EXTENDED REGISTERS */ +/*********************************************/ + +static void +SiS_ClearExt1Regs(struct SiS_Private *SiS_Pr, unsigned short ModeNo) +{ + int i; + + for(i = 0x0A; i <= 0x0E; i++) { + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, i, 0x00); + } + + SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x37, 0xFE); +} + +/*********************************************/ +/* Get rate index */ +/*********************************************/ + +static unsigned short +SiS_GetRatePtr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, + unsigned short ModeIdIndex) +{ + unsigned short rrti, i, index, temp; + + if (ModeNo <= 0x13) + return 0xFFFF; + + index = SiS_GetReg(SiS_Pr,SiS_Pr->SiS_P3d4, 0x33) & 0x0F; + if (index > 0) index--; + + rrti = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].REFindex; + ModeNo = SiS_Pr->SiS_RefIndex[rrti].ModeID; + + i = 0; + do { + if (SiS_Pr->SiS_RefIndex[rrti + i].ModeID != ModeNo) + break; + + temp = SiS_Pr->SiS_RefIndex[rrti + i].Ext_InfoFlag & ModeTypeMask; + if (temp < SiS_Pr->SiS_ModeType) + break; + + i++; + index--; + } while(index != 0xFFFF); + + i--; + + return (rrti + i); +} + +/*********************************************/ +/* SYNC */ +/*********************************************/ + +static void +SiS_SetCRT1Sync(struct SiS_Private *SiS_Pr, unsigned short rrti) +{ + unsigned short sync = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag >> 8; + sync &= 0xC0; + sync |= 0x2f; + SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c2, sync); +} + +/*********************************************/ +/* CRTC/2 */ +/*********************************************/ + +static void +SiS_SetCRT1CRTC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, + unsigned short ModeIdIndex, unsigned short rrti) +{ + unsigned char index; + unsigned short temp, i, j, modeflag; + + SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3d4,0x11,0x7f); + + modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; + + index = SiS_Pr->SiS_RefIndex[rrti].Ext_CRT1CRTC; + + for(i = 0,j = 0; i <= 7; i++, j++) { + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, j, + SiS_Pr->SiS_CRT1Table[index].CR[i]); + } + for(j = 0x10; i <= 10; i++, j++) { + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, j, + SiS_Pr->SiS_CRT1Table[index].CR[i]); + } + for(j = 0x15; i <= 12; i++, j++) { + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, j, + SiS_Pr->SiS_CRT1Table[index].CR[i]); + } + for(j = 0x0A; i <= 15; i++, j++) { + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, j, + SiS_Pr->SiS_CRT1Table[index].CR[i]); + } + + temp = SiS_Pr->SiS_CRT1Table[index].CR[16] & 0xE0; + SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4, 0x0E, temp); + + temp = ((SiS_Pr->SiS_CRT1Table[index].CR[16]) & 0x01) << 5; + if (modeflag & DoubleScanMode) temp |= 0x80; + SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3d4, 0x09, 0x5F, temp); + + if (SiS_Pr->SiS_ModeType > ModeVGA) + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x14, 0x4F); +} + +/*********************************************/ +/* OFFSET & PITCH */ +/*********************************************/ +/* (partly overruled by SetPitch() in XF86) */ +/*********************************************/ + +static void +SiS_SetCRT1Offset(struct SiS_Private *SiS_Pr, unsigned short ModeNo, + unsigned short ModeIdIndex, unsigned short rrti) +{ + unsigned short du = SiS_GetOffset(SiS_Pr, ModeNo, ModeIdIndex, rrti); + unsigned short infoflag = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag; + unsigned short temp; + + temp = (du >> 8) & 0x0f; + SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0E, 0xF0, temp); + + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x13, (du & 0xFF)); + + if (infoflag & InterlaceMode) du >>= 1; + + du <<= 5; + temp = (du >> 8) & 0xff; + if (du & 0xff) temp++; + temp++; + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x10, temp); +} + +/*********************************************/ +/* VCLK */ +/*********************************************/ + +static void +SiS_SetCRT1VCLK(struct SiS_Private *SiS_Pr, unsigned short ModeNo, + unsigned short rrti) +{ + unsigned short index = SiS_Pr->SiS_RefIndex[rrti].Ext_CRTVCLK; + unsigned short clka = SiS_Pr->SiS_VCLKData[index].SR2B; + unsigned short clkb = SiS_Pr->SiS_VCLKData[index].SR2C; + + SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4,0x31,0xCF); + + SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4,0x2B,clka); + SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4,0x2C,clkb); + SiS_SetReg(SiS_Pr,SiS_Pr->SiS_P3c4,0x2D,0x01); +} + +/*********************************************/ +/* FIFO */ +/*********************************************/ + +static void +SiS_SetCRT1FIFO_310(struct SiS_Private *SiS_Pr, unsigned short ModeNo, + unsigned short mi) +{ + unsigned short modeflag = SiS_Pr->SiS_EModeIDTable[mi].Ext_ModeFlag; + + /* disable auto-threshold */ + SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x3D, 0xFE); + + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x08, 0xAE); + SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x09, 0xF0); + + if (ModeNo <= 0x13) + return; + + if ((!(modeflag & DoubleScanMode)) || (!(modeflag & HalfDCLK))) { + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x08, 0x34); + SiS_SetRegOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x3D, 0x01); + } +} + +/*********************************************/ +/* MODE REGISTERS */ +/*********************************************/ + +static void +SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo, + unsigned short rrti) +{ + unsigned short data = 0, VCLK = 0, index = 0; + + if (ModeNo > 0x13) { + index = SiS_Pr->SiS_RefIndex[rrti].Ext_CRTVCLK; + VCLK = SiS_Pr->SiS_VCLKData[index].CLOCK; + } + + if (VCLK >= 166) data |= 0x0c; + SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x32, 0xf3, data); + + if (VCLK >= 166) + SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x1f, 0xe7); + + /* DAC speed */ + data = 0x03; + if (VCLK >= 260) + data = 0x00; + else if (VCLK >= 160) + data = 0x01; + else if (VCLK >= 135) + data = 0x02; + + SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x07, 0xF8, data); +} + +static void +SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, + unsigned short ModeIdIndex, unsigned short rrti) +{ + unsigned short data, infoflag = 0, modeflag; + + if (ModeNo <= 0x13) + modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag; + else { + modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag; + infoflag = SiS_Pr->SiS_RefIndex[rrti].Ext_InfoFlag; + } + + /* Disable DPMS */ + SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x1F, 0x3F); + + data = 0; + if (ModeNo > 0x13) { + if (SiS_Pr->SiS_ModeType > ModeEGA) { + data |= 0x02; + data |= ((SiS_Pr->SiS_ModeType - ModeVGA) << 2); + } + if (infoflag & InterlaceMode) data |= 0x20; + } + SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x06, 0xC0, data); + + data = 0; + if (infoflag & InterlaceMode) { + /* data = (Hsync / 8) - ((Htotal / 8) / 2) + 3 */ + unsigned short hrs = (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x04) | + ((SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0b) & 0xc0) << 2)) - 3; + unsigned short hto = (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x00) | + ((SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0b) & 0x03) << 8)) + 5; + data = hrs - (hto >> 1) + 3; + } + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x19, (data & 0xFF)); + SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3d4, 0x1a, 0xFC, (data >> 8)); + + if (modeflag & HalfDCLK) + SiS_SetRegOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x01, 0x08); + + data = 0; + if (modeflag & LineCompareOff) + data = 0x08; + SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0F, 0xB7, data); + + if ((SiS_Pr->SiS_ModeType == ModeEGA) && (ModeNo > 0x13)) + SiS_SetRegOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x0F, 0x40); + + SiS_SetRegAND(SiS_Pr, SiS_Pr->SiS_P3c4, 0x31, 0xfb); + + data = 0x60; + if (SiS_Pr->SiS_ModeType != ModeText) { + data ^= 0x60; + if (SiS_Pr->SiS_ModeType != ModeEGA) + data ^= 0xA0; + } + SiS_SetRegANDOR(SiS_Pr, SiS_Pr->SiS_P3c4, 0x21, 0x1F, data); + + SiS_SetVCLKState(SiS_Pr, ModeNo, rrti); + + if (SiS_GetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x31) & 0x40) + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x52, 0x2c); + else + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x52, 0x6c); +} + +/*********************************************/ +/* LOAD DAC */ +/*********************************************/ + +static void +SiS_WriteDAC(struct SiS_Private *SiS_Pr, unsigned long DACData, + unsigned short shiftflag, unsigned short dl, unsigned short ah, + unsigned short al, unsigned short dh) +{ + unsigned short d1, d2, d3; + + switch (dl) { + case 0: + d1 = dh; d2 = ah; d3 = al; + break; + case 1: + d1 = ah; d2 = al; d3 = dh; + break; + default: + d1 = al; d2 = dh; d3 = ah; + } + SiS_SetRegByte(SiS_Pr, DACData, (d1 << shiftflag)); + SiS_SetRegByte(SiS_Pr, DACData, (d2 << shiftflag)); + SiS_SetRegByte(SiS_Pr, DACData, (d3 << shiftflag)); +} + +static void +SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short mi) +{ + unsigned short data, data2, time, i, j, k, m, n, o; + unsigned short si, di, bx, sf; + unsigned long DACAddr, DACData; + const unsigned char *table = NULL; + + if (ModeNo < 0x13) + data = SiS_Pr->SiS_SModeIDTable[mi].St_ModeFlag; + else + data = SiS_Pr->SiS_EModeIDTable[mi].Ext_ModeFlag; + + data &= DACInfoFlag; + + j = time = 64; + if (data == 0x00) + table = SiS_MDA_DAC; + else if (data == 0x08) + table = SiS_CGA_DAC; + else if (data == 0x10) + table = SiS_EGA_DAC; + else { + j = 16; + time = 256; + table = SiS_VGA_DAC; + } + + DACAddr = SiS_Pr->SiS_P3c8; + DACData = SiS_Pr->SiS_P3c9; + sf = 0; + SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c6, 0xFF); + + SiS_SetRegByte(SiS_Pr, DACAddr, 0x00); + + for(i = 0; i < j; i++) { + data = table[i]; + for(k = 0; k < 3; k++) { + data2 = 0; + if (data & 0x01) data2 += 0x2A; + if (data & 0x02) data2 += 0x15; + SiS_SetRegByte(SiS_Pr, DACData, (data2 << sf)); + data >>= 2; + } + } + + if (time == 256) { + for(i = 16; i < 32; i++) { + data = table[i] << sf; + for(k = 0; k < 3; k++) + SiS_SetRegByte(SiS_Pr, DACData, data); + } + si = 32; + for(m = 0; m < 9; m++) { + di = si; + bx = si + 4; + for(n = 0; n < 3; n++) { + for(o = 0; o < 5; o++) { + SiS_WriteDAC(SiS_Pr, DACData, sf, n, + table[di], table[bx], table[si]); + si++; + } + si -= 2; + for(o = 0; o < 3; o++) { + SiS_WriteDAC(SiS_Pr, DACData, sf, n, + table[di], table[si], table[bx]); + si--; + } + } + si += 5; + } + } +} + +/*********************************************/ +/* SET CRT1 REGISTER GROUP */ +/*********************************************/ + +static void +SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, + unsigned short ModeIdIndex) +{ + unsigned short StandTableIndex, rrti; + + SiS_Pr->SiS_CRT1Mode = ModeNo; + + if (ModeNo <= 0x13) + StandTableIndex = 0; + else + StandTableIndex = 1; + + SiS_ResetSegmentRegisters(SiS_Pr); + SiS_SetSeqRegs(SiS_Pr, StandTableIndex); + SiS_SetMiscRegs(SiS_Pr, StandTableIndex); + SiS_SetCRTCRegs(SiS_Pr, StandTableIndex); + SiS_SetATTRegs(SiS_Pr, StandTableIndex); + SiS_SetGRCRegs(SiS_Pr, StandTableIndex); + SiS_ClearExt1Regs(SiS_Pr, ModeNo); + + rrti = SiS_GetRatePtr(SiS_Pr, ModeNo, ModeIdIndex); + + if (rrti != 0xFFFF) { + SiS_SetCRT1Sync(SiS_Pr, rrti); + SiS_SetCRT1CRTC(SiS_Pr, ModeNo, ModeIdIndex, rrti); + SiS_SetCRT1Offset(SiS_Pr, ModeNo, ModeIdIndex, rrti); + SiS_SetCRT1VCLK(SiS_Pr, ModeNo, rrti); + } + + SiS_SetCRT1FIFO_310(SiS_Pr, ModeNo, ModeIdIndex); + + SiS_SetCRT1ModeRegs(SiS_Pr, ModeNo, ModeIdIndex, rrti); + + SiS_LoadDAC(SiS_Pr, ModeNo, ModeIdIndex); + + SiS_DisplayOn(SiS_Pr); +} + +/*********************************************/ +/* SiSSetMode() */ +/*********************************************/ + +int +SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo) +{ + unsigned short ModeIdIndex; + unsigned long BaseAddr = SiS_Pr->IOAddress; + + SiSUSB_InitPtr(SiS_Pr); + SiSUSBRegInit(SiS_Pr, BaseAddr); + SiS_GetSysFlags(SiS_Pr); + + if (!(SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex))) + return 0; + + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3c4, 0x05, 0x86); + + SiSInitPCIetc(SiS_Pr); + + ModeNo &= 0x7f; + + SiS_Pr->SiS_ModeType = + SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag & ModeTypeMask; + + SiS_Pr->SiS_SetFlag = LowModeTests; + + /* Set mode on CRT1 */ + SiS_SetCRT1Group(SiS_Pr, ModeNo, ModeIdIndex); + + SiS_HandleCRT1(SiS_Pr); + + SiS_DisplayOn(SiS_Pr); + SiS_SetRegByte(SiS_Pr, SiS_Pr->SiS_P3c6, 0xFF); + + /* Store mode number */ + SiS_SetReg(SiS_Pr, SiS_Pr->SiS_P3d4, 0x34, ModeNo); + + return 1; +} + +int +SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo) +{ + unsigned short ModeNo = 0; + int i; + + SiSUSB_InitPtr(SiS_Pr); + + if (VModeNo == 0x03) { + + ModeNo = 0x03; + + } else { + + i = 0; + do { + + if (SiS_Pr->SiS_EModeIDTable[i].Ext_VESAID == VModeNo) { + ModeNo = SiS_Pr->SiS_EModeIDTable[i].Ext_ModeID; + break; + } + + } while (SiS_Pr->SiS_EModeIDTable[i++].Ext_ModeID != 0xff); + + } + + if (!ModeNo) + return 0; + + return SiSUSBSetMode(SiS_Pr, ModeNo); +} + +#endif /* INCL_SISUSB_CON */ + + + + diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.h b/drivers/usb/misc/sisusbvga/sisusb_init.h new file mode 100644 index 00000000000..5b11577835c --- /dev/null +++ b/drivers/usb/misc/sisusbvga/sisusb_init.h @@ -0,0 +1,830 @@ +/* $XFree86$ */ +/* $XdotOrg$ */ +/* + * Data and prototypes for init.c + * + * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria + * + * If distributed as part of the Linux kernel, the following license terms + * apply: + * + * * This program is free software; you can redistribute it and/or modify + * * it under the terms of the GNU General Public License as published by + * * the Free Software Foundation; either version 2 of the named License, + * * or any later version. + * * + * * This program is distributed in the hope that it will be useful, + * * but WITHOUT ANY WARRANTY; without even the implied warranty of + * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * * GNU General Public License for more details. + * * + * * You should have received a copy of the GNU General Public License + * * along with this program; if not, write to the Free Software + * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA + * + * Otherwise, the following license terms apply: + * + * * Redistribution and use in source and binary forms, with or without + * * modification, are permitted provided that the following conditions + * * are met: + * * 1) Redistributions of source code must retain the above copyright + * * notice, this list of conditions and the following disclaimer. + * * 2) Redistributions in binary form must reproduce the above copyright + * * notice, this list of conditions and the following disclaimer in the + * * documentation and/or other materials provided with the distribution. + * * 3) The name of the author may not be used to endorse or promote products + * * derived from this software without specific prior written permission. + * * + * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Author: Thomas Winischhofer <thomas@winischhofer.net> + * + */ + +#ifndef _SISUSB_INIT_H_ +#define _SISUSB_INIT_H_ + +/* SiS_ModeType */ +#define ModeText 0x00 +#define ModeCGA 0x01 +#define ModeEGA 0x02 +#define ModeVGA 0x03 +#define Mode15Bpp 0x04 +#define Mode16Bpp 0x05 +#define Mode24Bpp 0x06 +#define Mode32Bpp 0x07 + +#define ModeTypeMask 0x07 +#define IsTextMode 0x07 + +#define DACInfoFlag 0x0018 +#define MemoryInfoFlag 0x01E0 +#define MemorySizeShift 5 + +/* modeflag */ +#define Charx8Dot 0x0200 +#define LineCompareOff 0x0400 +#define CRT2Mode 0x0800 +#define HalfDCLK 0x1000 +#define NoSupportSimuTV 0x2000 +#define NoSupportLCDScale 0x4000 /* SiS bridge: No scaling possible (no matter what panel) */ +#define DoubleScanMode 0x8000 + +/* Infoflag */ +#define SupportTV 0x0008 +#define SupportTV1024 0x0800 +#define SupportCHTV 0x0800 +#define Support64048060Hz 0x0800 /* Special for 640x480 LCD */ +#define SupportHiVision 0x0010 +#define SupportYPbPr750p 0x1000 +#define SupportLCD 0x0020 +#define SupportRAMDAC2 0x0040 /* All (<= 100Mhz) */ +#define SupportRAMDAC2_135 0x0100 /* All except DH (<= 135Mhz) */ +#define SupportRAMDAC2_162 0x0200 /* B, C (<= 162Mhz) */ +#define SupportRAMDAC2_202 0x0400 /* C (<= 202Mhz) */ +#define InterlaceMode 0x0080 +#define SyncPP 0x0000 +#define SyncPN 0x4000 +#define SyncNP 0x8000 +#define SyncNN 0xc000 + +/* SetFlag */ +#define ProgrammingCRT2 0x0001 +#define LowModeTests 0x0002 +#define LCDVESATiming 0x0008 +#define EnableLVDSDDA 0x0010 +#define SetDispDevSwitchFlag 0x0020 +#define CheckWinDos 0x0040 +#define SetDOSMode 0x0080 + +/* Index in ModeResInfo table */ +#define SIS_RI_320x200 0 +#define SIS_RI_320x240 1 +#define SIS_RI_320x400 2 +#define SIS_RI_400x300 3 +#define SIS_RI_512x384 4 +#define SIS_RI_640x400 5 +#define SIS_RI_640x480 6 +#define SIS_RI_800x600 7 +#define SIS_RI_1024x768 8 +#define SIS_RI_1280x1024 9 +#define SIS_RI_1600x1200 10 +#define SIS_RI_1920x1440 11 +#define SIS_RI_2048x1536 12 +#define SIS_RI_720x480 13 +#define SIS_RI_720x576 14 +#define SIS_RI_1280x960 15 +#define SIS_RI_800x480 16 +#define SIS_RI_1024x576 17 +#define SIS_RI_1280x720 18 +#define SIS_RI_856x480 19 +#define SIS_RI_1280x768 20 +#define SIS_RI_1400x1050 21 +#define SIS_RI_1152x864 22 /* Up to here SiS conforming */ +#define SIS_RI_848x480 23 +#define SIS_RI_1360x768 24 +#define SIS_RI_1024x600 25 +#define SIS_RI_1152x768 26 +#define SIS_RI_768x576 27 +#define SIS_RI_1360x1024 28 +#define SIS_RI_1680x1050 29 +#define SIS_RI_1280x800 30 +#define SIS_RI_1920x1080 31 +#define SIS_RI_960x540 32 +#define SIS_RI_960x600 33 + +#define SIS_VIDEO_CAPTURE 0x00 - 0x30 +#define SIS_VIDEO_PLAYBACK 0x02 - 0x30 +#define SIS_CRT2_PORT_04 0x04 - 0x30 + +/* Mode numbers */ +static const unsigned short ModeIndex_320x200[] = {0x59, 0x41, 0x00, 0x4f}; +static const unsigned short ModeIndex_320x240[] = {0x50, 0x56, 0x00, 0x53}; +static const unsigned short ModeIndex_400x300[] = {0x51, 0x57, 0x00, 0x54}; +static const unsigned short ModeIndex_512x384[] = {0x52, 0x58, 0x00, 0x5c}; +static const unsigned short ModeIndex_640x400[] = {0x2f, 0x5d, 0x00, 0x5e}; +static const unsigned short ModeIndex_640x480[] = {0x2e, 0x44, 0x00, 0x62}; +static const unsigned short ModeIndex_720x480[] = {0x31, 0x33, 0x00, 0x35}; +static const unsigned short ModeIndex_720x576[] = {0x32, 0x34, 0x00, 0x36}; +static const unsigned short ModeIndex_768x576[] = {0x5f, 0x60, 0x00, 0x61}; +static const unsigned short ModeIndex_800x480[] = {0x70, 0x7a, 0x00, 0x76}; +static const unsigned short ModeIndex_800x600[] = {0x30, 0x47, 0x00, 0x63}; +static const unsigned short ModeIndex_848x480[] = {0x39, 0x3b, 0x00, 0x3e}; +static const unsigned short ModeIndex_856x480[] = {0x3f, 0x42, 0x00, 0x45}; +static const unsigned short ModeIndex_960x540[] = {0x1d, 0x1e, 0x00, 0x1f}; +static const unsigned short ModeIndex_960x600[] = {0x20, 0x21, 0x00, 0x22}; +static const unsigned short ModeIndex_1024x768[] = {0x38, 0x4a, 0x00, 0x64}; +static const unsigned short ModeIndex_1024x576[] = {0x71, 0x74, 0x00, 0x77}; +static const unsigned short ModeIndex_1152x864[] = {0x29, 0x2a, 0x00, 0x2b}; +static const unsigned short ModeIndex_1280x720[] = {0x79, 0x75, 0x00, 0x78}; +static const unsigned short ModeIndex_1280x768[] = {0x23, 0x24, 0x00, 0x25}; +static const unsigned short ModeIndex_1280x1024[] = {0x3a, 0x4d, 0x00, 0x65}; + +static const unsigned char SiS_MDA_DAC[] = +{ + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15, + 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15, + 0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F, + 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, + 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15, + 0x15,0x15,0x15,0x15,0x15,0x15,0x15,0x15, + 0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F +}; + +static const unsigned char SiS_CGA_DAC[] = +{ + 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15, + 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15, + 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F, + 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F, + 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15, + 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15, + 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F, + 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F +}; + +static const unsigned char SiS_EGA_DAC[] = +{ + 0x00,0x10,0x04,0x14,0x01,0x11,0x05,0x15, + 0x20,0x30,0x24,0x34,0x21,0x31,0x25,0x35, + 0x08,0x18,0x0C,0x1C,0x09,0x19,0x0D,0x1D, + 0x28,0x38,0x2C,0x3C,0x29,0x39,0x2D,0x3D, + 0x02,0x12,0x06,0x16,0x03,0x13,0x07,0x17, + 0x22,0x32,0x26,0x36,0x23,0x33,0x27,0x37, + 0x0A,0x1A,0x0E,0x1E,0x0B,0x1B,0x0F,0x1F, + 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F +}; + +static const unsigned char SiS_VGA_DAC[] = +{ + 0x00,0x10,0x04,0x14,0x01,0x11,0x09,0x15, + 0x2A,0x3A,0x2E,0x3E,0x2B,0x3B,0x2F,0x3F, + 0x00,0x05,0x08,0x0B,0x0E,0x11,0x14,0x18, + 0x1C,0x20,0x24,0x28,0x2D,0x32,0x38,0x3F, + 0x00,0x10,0x1F,0x2F,0x3F,0x1F,0x27,0x2F, + 0x37,0x3F,0x2D,0x31,0x36,0x3A,0x3F,0x00, + 0x07,0x0E,0x15,0x1C,0x0E,0x11,0x15,0x18, + 0x1C,0x14,0x16,0x18,0x1A,0x1C,0x00,0x04, + 0x08,0x0C,0x10,0x08,0x0A,0x0C,0x0E,0x10, + 0x0B,0x0C,0x0D,0x0F,0x10 +}; + +static const struct SiS_St SiSUSB_SModeIDTable[] = +{ + {0x03,0x0010,0x18,0x02,0x02,0x00,0x01,0x03,0x40}, + {0xff,0x0000,0x00,0x00,0x00,0x00,0x00,0x00,0x00} +}; + +static const struct SiS_StResInfo_S SiSUSB_StResInfo[] = +{ + { 640,400}, + { 640,350}, + { 720,400}, + { 720,350}, + { 640,480} +}; + +static const struct SiS_ModeResInfo SiSUSB_ModeResInfo[] = +{ + { 320, 200, 8, 8}, /* 0x00 */ + { 320, 240, 8, 8}, /* 0x01 */ + { 320, 400, 8, 8}, /* 0x02 */ + { 400, 300, 8, 8}, /* 0x03 */ + { 512, 384, 8, 8}, /* 0x04 */ + { 640, 400, 8,16}, /* 0x05 */ + { 640, 480, 8,16}, /* 0x06 */ + { 800, 600, 8,16}, /* 0x07 */ + { 1024, 768, 8,16}, /* 0x08 */ + { 1280,1024, 8,16}, /* 0x09 */ + { 1600,1200, 8,16}, /* 0x0a */ + { 1920,1440, 8,16}, /* 0x0b */ + { 2048,1536, 8,16}, /* 0x0c */ + { 720, 480, 8,16}, /* 0x0d */ + { 720, 576, 8,16}, /* 0x0e */ + { 1280, 960, 8,16}, /* 0x0f */ + { 800, 480, 8,16}, /* 0x10 */ + { 1024, 576, 8,16}, /* 0x11 */ + { 1280, 720, 8,16}, /* 0x12 */ + { 856, 480, 8,16}, /* 0x13 */ + { 1280, 768, 8,16}, /* 0x14 */ + { 1400,1050, 8,16}, /* 0x15 */ + { 1152, 864, 8,16}, /* 0x16 */ + { 848, 480, 8,16}, /* 0x17 */ + { 1360, 768, 8,16}, /* 0x18 */ + { 1024, 600, 8,16}, /* 0x19 */ + { 1152, 768, 8,16}, /* 0x1a */ + { 768, 576, 8,16}, /* 0x1b */ + { 1360,1024, 8,16}, /* 0x1c */ + { 1680,1050, 8,16}, /* 0x1d */ + { 1280, 800, 8,16}, /* 0x1e */ + { 1920,1080, 8,16}, /* 0x1f */ + { 960, 540, 8,16}, /* 0x20 */ + { 960, 600, 8,16} /* 0x21 */ +}; + +static const struct SiS_StandTable SiSUSB_StandTable[] = +{ + /* MD_3_400 - mode 0x03 - 400 */ + { + 0x50,0x18,0x10,0x1000, + { 0x00,0x03,0x00,0x02 }, + 0x67, + { 0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f, + 0x00,0x4f,0x0d,0x0e,0x00,0x00,0x00,0x00, + 0x9c,0x8e,0x8f,0x28,0x1f,0x96,0xb9,0xa3, + 0xff }, + { 0x00,0x01,0x02,0x03,0x04,0x05,0x14,0x07, + 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f, + 0x0c,0x00,0x0f,0x08 }, + { 0x00,0x00,0x00,0x00,0x00,0x10,0x0e,0x00, 0xff } + }, + /* Generic for VGA and higher */ + { + 0x00,0x00,0x00,0x0000, + { 0x01,0x0f,0x00,0x0e }, + 0x23, + { 0x5f,0x4f,0x50,0x82,0x54,0x80,0x0b,0x3e, + 0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00, + 0xea,0x8c,0xdf,0x28,0x40,0xe7,0x04,0xa3, + 0xff }, + { 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07, + 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f, + 0x01,0x00,0x00,0x00 }, + { 0x00,0x00,0x00,0x00,0x00,0x40,0x05,0x0f, 0xff } + } +}; + +static const struct SiS_Ext SiSUSB_EModeIDTable[] = +{ + {0x2e,0x0a1b,0x0101,SIS_RI_640x480, 0x00,0x00,0x05,0x05,0x08, 2}, /* 640x480x8 */ + {0x2f,0x0a1b,0x0100,SIS_RI_640x400, 0x00,0x00,0x05,0x05,0x10, 0}, /* 640x400x8 */ + {0x30,0x2a1b,0x0103,SIS_RI_800x600, 0x00,0x00,0x07,0x06,0x00, 3}, /* 800x600x8 */ + {0x31,0x4a1b,0x0000,SIS_RI_720x480, 0x00,0x00,0x06,0x06,0x11,-1}, /* 720x480x8 */ + {0x32,0x4a1b,0x0000,SIS_RI_720x576, 0x00,0x00,0x06,0x06,0x12,-1}, /* 720x576x8 */ + {0x33,0x4a1d,0x0000,SIS_RI_720x480, 0x00,0x00,0x06,0x06,0x11,-1}, /* 720x480x16 */ + {0x34,0x6a1d,0x0000,SIS_RI_720x576, 0x00,0x00,0x06,0x06,0x12,-1}, /* 720x576x16 */ + {0x35,0x4a1f,0x0000,SIS_RI_720x480, 0x00,0x00,0x06,0x06,0x11,-1}, /* 720x480x32 */ + {0x36,0x6a1f,0x0000,SIS_RI_720x576, 0x00,0x00,0x06,0x06,0x12,-1}, /* 720x576x32 */ + {0x38,0x0a1b,0x0105,SIS_RI_1024x768, 0x00,0x00,0x08,0x07,0x13, 4}, /* 1024x768x8 */ + {0x3a,0x0e3b,0x0107,SIS_RI_1280x1024,0x00,0x00,0x00,0x00,0x2f, 8}, /* 1280x1024x8 */ + {0x41,0x9a1d,0x010e,SIS_RI_320x200, 0x00,0x00,0x04,0x04,0x1a, 0}, /* 320x200x16 */ + {0x44,0x0a1d,0x0111,SIS_RI_640x480, 0x00,0x00,0x05,0x05,0x08, 2}, /* 640x480x16 */ + {0x47,0x2a1d,0x0114,SIS_RI_800x600, 0x00,0x00,0x07,0x06,0x00, 3}, /* 800x600x16 */ + {0x4a,0x0a3d,0x0117,SIS_RI_1024x768, 0x00,0x00,0x08,0x07,0x13, 4}, /* 1024x768x16 */ + {0x4d,0x0e7d,0x011a,SIS_RI_1280x1024,0x00,0x00,0x00,0x00,0x2f, 8}, /* 1280x1024x16 */ + {0x50,0x9a1b,0x0132,SIS_RI_320x240, 0x00,0x00,0x04,0x04,0x1b, 2}, /* 320x240x8 */ + {0x51,0xba1b,0x0133,SIS_RI_400x300, 0x00,0x00,0x07,0x07,0x1c, 3}, /* 400x300x8 */ + {0x52,0xba1b,0x0134,SIS_RI_512x384, 0x00,0x00,0x00,0x00,0x1d, 4}, /* 512x384x8 */ + {0x56,0x9a1d,0x0135,SIS_RI_320x240, 0x00,0x00,0x04,0x04,0x1b, 2}, /* 320x240x16 */ + {0x57,0xba1d,0x0136,SIS_RI_400x300, 0x00,0x00,0x07,0x07,0x1c, 3}, /* 400x300x16 */ + {0x58,0xba1d,0x0137,SIS_RI_512x384, 0x00,0x00,0x00,0x00,0x1d, 4}, /* 512x384x16 */ + {0x59,0x9a1b,0x0138,SIS_RI_320x200, 0x00,0x00,0x04,0x04,0x1a, 0}, /* 320x200x8 */ + {0x5c,0xba1f,0x0000,SIS_RI_512x384, 0x00,0x00,0x00,0x00,0x1d, 4}, /* 512x384x32 */ + {0x5d,0x0a1d,0x0139,SIS_RI_640x400, 0x00,0x00,0x05,0x07,0x10, 0}, /* 640x400x16 */ + {0x5e,0x0a1f,0x0000,SIS_RI_640x400, 0x00,0x00,0x05,0x07,0x10, 0}, /* 640x400x32 */ + {0x62,0x0a3f,0x013a,SIS_RI_640x480, 0x00,0x00,0x05,0x05,0x08, 2}, /* 640x480x32 */ + {0x63,0x2a3f,0x013b,SIS_RI_800x600, 0x00,0x00,0x07,0x06,0x00, 3}, /* 800x600x32 */ + {0x64,0x0a7f,0x013c,SIS_RI_1024x768, 0x00,0x00,0x08,0x07,0x13, 4}, /* 1024x768x32 */ + {0x65,0x0eff,0x013d,SIS_RI_1280x1024,0x00,0x00,0x00,0x00,0x2f, 8}, /* 1280x1024x32 */ + {0x70,0x6a1b,0x0000,SIS_RI_800x480, 0x00,0x00,0x07,0x07,0x1e,-1}, /* 800x480x8 */ + {0x71,0x4a1b,0x0000,SIS_RI_1024x576, 0x00,0x00,0x00,0x00,0x21,-1}, /* 1024x576x8 */ + {0x74,0x4a1d,0x0000,SIS_RI_1024x576, 0x00,0x00,0x00,0x00,0x21,-1}, /* 1024x576x16 */ + {0x75,0x0a3d,0x0000,SIS_RI_1280x720, 0x00,0x00,0x00,0x00,0x24, 5}, /* 1280x720x16 */ + {0x76,0x6a1f,0x0000,SIS_RI_800x480, 0x00,0x00,0x07,0x07,0x1e,-1}, /* 800x480x32 */ + {0x77,0x4a1f,0x0000,SIS_RI_1024x576, 0x00,0x00,0x00,0x00,0x21,-1}, /* 1024x576x32 */ + {0x78,0x0a3f,0x0000,SIS_RI_1280x720, 0x00,0x00,0x00,0x00,0x24, 5}, /* 1280x720x32 */ + {0x79,0x0a3b,0x0000,SIS_RI_1280x720, 0x00,0x00,0x00,0x00,0x24, 5}, /* 1280x720x8 */ + {0x7a,0x6a1d,0x0000,SIS_RI_800x480, 0x00,0x00,0x07,0x07,0x1e,-1}, /* 800x480x16 */ + {0x23,0x0e3b,0x0000,SIS_RI_1280x768, 0x00,0x00,0x00,0x00,0x27, 6}, /* 1280x768x8 */ + {0x24,0x0e7d,0x0000,SIS_RI_1280x768, 0x00,0x00,0x00,0x00,0x27, 6}, /* 1280x768x16 */ + {0x25,0x0eff,0x0000,SIS_RI_1280x768, 0x00,0x00,0x00,0x00,0x27, 6}, /* 1280x768x32 */ + {0x39,0x6a1b,0x0000,SIS_RI_848x480, 0x00,0x00,0x00,0x00,0x28,-1}, /* 848x480 */ + {0x3b,0x6a3d,0x0000,SIS_RI_848x480, 0x00,0x00,0x00,0x00,0x28,-1}, + {0x3e,0x6a7f,0x0000,SIS_RI_848x480, 0x00,0x00,0x00,0x00,0x28,-1}, + {0x3f,0x6a1b,0x0000,SIS_RI_856x480, 0x00,0x00,0x00,0x00,0x2a,-1}, /* 856x480 */ + {0x42,0x6a3d,0x0000,SIS_RI_856x480, 0x00,0x00,0x00,0x00,0x2a,-1}, + {0x45,0x6a7f,0x0000,SIS_RI_856x480, 0x00,0x00,0x00,0x00,0x2a,-1}, + {0x4f,0x9a1f,0x0000,SIS_RI_320x200, 0x00,0x00,0x04,0x04,0x1a, 0}, /* 320x200x32 */ + {0x53,0x9a1f,0x0000,SIS_RI_320x240, 0x00,0x00,0x04,0x04,0x1b, 2}, /* 320x240x32 */ + {0x54,0xba1f,0x0000,SIS_RI_400x300, 0x00,0x00,0x07,0x07,0x1c, 3}, /* 400x300x32 */ + {0x5f,0x6a1b,0x0000,SIS_RI_768x576, 0x00,0x00,0x06,0x06,0x2c,-1}, /* 768x576 */ + {0x60,0x6a1d,0x0000,SIS_RI_768x576, 0x00,0x00,0x06,0x06,0x2c,-1}, + {0x61,0x6a3f,0x0000,SIS_RI_768x576, 0x00,0x00,0x06,0x06,0x2c,-1}, + {0x1d,0x6a1b,0x0000,SIS_RI_960x540, 0x00,0x00,0x00,0x00,0x2d,-1}, /* 960x540 */ + {0x1e,0x6a3d,0x0000,SIS_RI_960x540, 0x00,0x00,0x00,0x00,0x2d,-1}, + {0x1f,0x6a7f,0x0000,SIS_RI_960x540, 0x00,0x00,0x00,0x00,0x2d,-1}, + {0x20,0x6a1b,0x0000,SIS_RI_960x600, 0x00,0x00,0x00,0x00,0x2e,-1}, /* 960x600 */ + {0x21,0x6a3d,0x0000,SIS_RI_960x600, 0x00,0x00,0x00,0x00,0x2e,-1}, + {0x22,0x6a7f,0x0000,SIS_RI_960x600, 0x00,0x00,0x00,0x00,0x2e,-1}, + {0x29,0x4e1b,0x0000,SIS_RI_1152x864, 0x00,0x00,0x00,0x00,0x33,-1}, /* 1152x864 */ + {0x2a,0x4e3d,0x0000,SIS_RI_1152x864, 0x00,0x00,0x00,0x00,0x33,-1}, + {0x2b,0x4e7f,0x0000,SIS_RI_1152x864, 0x00,0x00,0x00,0x00,0x33,-1}, + {0xff,0x0000,0x0000,0, 0x00,0x00,0x00,0x00,0x00,-1} +}; + +static const struct SiS_Ext2 SiSUSB_RefIndex[] = +{ + {0x085f,0x0d,0x03,0x05,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x0 */ + {0x0067,0x0e,0x04,0x05,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x1 */ + {0x0067,0x0f,0x08,0x48,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x2 */ + {0x0067,0x10,0x07,0x8b,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x3 */ + {0x0047,0x11,0x0a,0x00,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x4 */ + {0x0047,0x12,0x0d,0x00,0x05,0x30, 800, 600, 0x40, 0x00, 0x00}, /* 0x5 */ + {0x0047,0x13,0x13,0x00,0x05,0x30, 800, 600, 0x20, 0x00, 0x00}, /* 0x6 */ + {0x0107,0x14,0x1c,0x00,0x05,0x30, 800, 600, 0x20, 0x00, 0x00}, /* 0x7 */ + {0xc85f,0x05,0x00,0x04,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0x8 */ + {0xc067,0x06,0x02,0x04,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0x9 */ + {0xc067,0x07,0x02,0x47,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xa */ + {0xc067,0x08,0x03,0x8a,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xb */ + {0xc047,0x09,0x05,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xc */ + {0xc047,0x0a,0x09,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xd */ + {0xc047,0x0b,0x0e,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xe */ + {0xc047,0x0c,0x15,0x00,0x04,0x2e, 640, 480, 0x40, 0x00, 0x00}, /* 0xf */ + {0x487f,0x04,0x00,0x00,0x00,0x2f, 640, 400, 0x30, 0x55, 0x6e}, /* 0x10 */ + {0xc06f,0x3c,0x01,0x06,0x13,0x31, 720, 480, 0x30, 0x00, 0x00}, /* 0x11 */ + {0x006f,0x3d,0x6f,0x06,0x14,0x32, 720, 576, 0x30, 0x00, 0x00}, /* 0x12 (6f was 03) */ + {0x0087,0x15,0x06,0x00,0x06,0x38,1024, 768, 0x30, 0x00, 0x00}, /* 0x13 */ + {0xc877,0x16,0x0b,0x06,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x14 */ + {0xc067,0x17,0x0f,0x49,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x15 */ + {0x0067,0x18,0x11,0x00,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x16 */ + {0x0047,0x19,0x16,0x8c,0x06,0x38,1024, 768, 0x20, 0x00, 0x00}, /* 0x17 */ + {0x0107,0x1a,0x1b,0x00,0x06,0x38,1024, 768, 0x10, 0x00, 0x00}, /* 0x18 */ + {0x0107,0x1b,0x1f,0x00,0x06,0x38,1024, 768, 0x10, 0x00, 0x00}, /* 0x19 */ + {0x407f,0x00,0x00,0x00,0x00,0x41, 320, 200, 0x30, 0x56, 0x4e}, /* 0x1a */ + {0xc07f,0x01,0x00,0x04,0x04,0x50, 320, 240, 0x30, 0x00, 0x00}, /* 0x1b */ + {0x007f,0x02,0x04,0x05,0x05,0x51, 400, 300, 0x30, 0x00, 0x00}, /* 0x1c */ + {0xc077,0x03,0x0b,0x06,0x06,0x52, 512, 384, 0x30, 0x00, 0x00}, /* 0x1d */ + {0x0077,0x32,0x40,0x08,0x18,0x70, 800, 480, 0x30, 0x00, 0x00}, /* 0x1e */ + {0x0047,0x33,0x07,0x08,0x18,0x70, 800, 480, 0x30, 0x00, 0x00}, /* 0x1f */ + {0x0047,0x34,0x0a,0x08,0x18,0x70, 800, 480, 0x30, 0x00, 0x00}, /* 0x20 */ + {0x0077,0x35,0x0b,0x09,0x19,0x71,1024, 576, 0x30, 0x00, 0x00}, /* 0x21 */ + {0x0047,0x36,0x11,0x09,0x19,0x71,1024, 576, 0x30, 0x00, 0x00}, /* 0x22 */ + {0x0047,0x37,0x16,0x09,0x19,0x71,1024, 576, 0x30, 0x00, 0x00}, /* 0x23 */ + {0x1137,0x38,0x19,0x0a,0x0c,0x75,1280, 720, 0x30, 0x00, 0x00}, /* 0x24 */ + {0x1107,0x39,0x1e,0x0a,0x0c,0x75,1280, 720, 0x30, 0x00, 0x00}, /* 0x25 */ + {0x1307,0x3a,0x20,0x0a,0x0c,0x75,1280, 720, 0x30, 0x00, 0x00}, /* 0x26 */ + {0x0077,0x42,0x5b,0x08,0x11,0x23,1280, 768, 0x30, 0x00, 0x00}, /* 0x27 */ + {0x0087,0x45,0x57,0x00,0x16,0x39, 848, 480, 0x30, 0x00, 0x00}, /* 0x28 38Hzi */ + {0xc067,0x46,0x55,0x0b,0x16,0x39, 848, 480, 0x30, 0x00, 0x00}, /* 0x29 848x480-60Hz */ + {0x0087,0x47,0x57,0x00,0x17,0x3f, 856, 480, 0x30, 0x00, 0x00}, /* 0x2a 856x480-38Hzi */ + {0xc067,0x48,0x57,0x00,0x17,0x3f, 856, 480, 0x30, 0x00, 0x00}, /* 0x2b 856x480-60Hz */ + {0x006f,0x4d,0x71,0x06,0x15,0x5f, 768, 576, 0x30, 0x00, 0x00}, /* 0x2c 768x576-56Hz */ + {0x0067,0x52,0x6a,0x00,0x1c,0x1d, 960, 540, 0x30, 0x00, 0x00}, /* 0x2d 960x540 60Hz */ + {0x0077,0x53,0x6b,0x0b,0x1d,0x20, 960, 600, 0x30, 0x00, 0x00}, /* 0x2e 960x600 60Hz */ + {0x0087,0x1c,0x11,0x00,0x07,0x3a,1280,1024, 0x30, 0x00, 0x00}, /* 0x2f */ + {0x0137,0x1d,0x19,0x07,0x07,0x3a,1280,1024, 0x00, 0x00, 0x00}, /* 0x30 */ + {0x0107,0x1e,0x1e,0x00,0x07,0x3a,1280,1024, 0x00, 0x00, 0x00}, /* 0x31 */ + {0x0207,0x1f,0x20,0x00,0x07,0x3a,1280,1024, 0x00, 0x00, 0x00}, /* 0x32 */ + {0x0127,0x54,0x6d,0x00,0x1a,0x29,1152, 864, 0x30, 0x00, 0x00}, /* 0x33 1152x864-60Hz */ + {0x0127,0x44,0x19,0x00,0x1a,0x29,1152, 864, 0x30, 0x00, 0x00}, /* 0x34 1152x864-75Hz */ + {0x0127,0x4a,0x1e,0x00,0x1a,0x29,1152, 864, 0x30, 0x00, 0x00}, /* 0x35 1152x864-85Hz */ + {0xffff,0x00,0x00,0x00,0x00,0x00, 0, 0, 0, 0x00, 0x00} +}; + +static const struct SiS_CRT1Table SiSUSB_CRT1Table[] = +{ + {{0x2d,0x27,0x28,0x90,0x2c,0x80,0xbf,0x1f, + 0x9c,0x8e,0x8f,0x96,0xb9,0x30,0x00,0x00, + 0x00}}, /* 0x0 */ + {{0x2d,0x27,0x28,0x90,0x2c,0x80,0x0b,0x3e, + 0xe9,0x8b,0xdf,0xe7,0x04,0x00,0x00,0x00, + 0x00}}, /* 0x1 */ + {{0x3d,0x31,0x31,0x81,0x37,0x1f,0x72,0xf0, + 0x58,0x8c,0x57,0x57,0x73,0x20,0x00,0x05, + 0x01}}, /* 0x2 */ + {{0x4f,0x3f,0x3f,0x93,0x45,0x0d,0x24,0xf5, + 0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x01, + 0x01}}, /* 0x3 */ + {{0x5f,0x4f,0x50,0x82,0x55,0x81,0xbf,0x1f, + 0x9c,0x8e,0x8f,0x96,0xb9,0x30,0x00,0x05, + 0x00}}, /* 0x4 */ + {{0x5f,0x4f,0x4f,0x83,0x55,0x81,0x0b,0x3e, + 0xe9,0x8b,0xdf,0xe8,0x0c,0x00,0x00,0x05, + 0x00}}, /* 0x5 */ + {{0x63,0x4f,0x4f,0x87,0x56,0x9b,0x06,0x3e, + 0xe8,0x8a,0xdf,0xe7,0x07,0x00,0x00,0x01, + 0x00}}, /* 0x6 */ + {{0x64,0x4f,0x4f,0x88,0x55,0x9d,0xf2,0x1f, + 0xe0,0x83,0xdf,0xdf,0xf3,0x10,0x00,0x01, + 0x00}}, /* 0x7 */ + {{0x63,0x4f,0x4f,0x87,0x5a,0x81,0xfb,0x1f, + 0xe0,0x83,0xdf,0xdf,0xfc,0x10,0x00,0x05, + 0x00}}, /* 0x8 */ + {{0x65,0x4f,0x4f,0x89,0x58,0x80,0xfb,0x1f, + 0xe0,0x83,0xdf,0xdf,0xfc,0x10,0x00,0x05, + 0x61}}, /* 0x9 */ + {{0x65,0x4f,0x4f,0x89,0x58,0x80,0x01,0x3e, + 0xe0,0x83,0xdf,0xdf,0x02,0x00,0x00,0x05, + 0x61}}, /* 0xa */ + {{0x67,0x4f,0x4f,0x8b,0x58,0x81,0x0d,0x3e, + 0xe0,0x83,0xdf,0xdf,0x0e,0x00,0x00,0x05, + 0x61}}, /* 0xb */ + {{0x65,0x4f,0x4f,0x89,0x57,0x9f,0xfb,0x1f, + 0xe6,0x8a,0xdf,0xdf,0xfc,0x10,0x00,0x01, + 0x00}}, /* 0xc */ + {{0x7b,0x63,0x63,0x9f,0x6a,0x93,0x6f,0xf0, + 0x58,0x8a,0x57,0x57,0x70,0x20,0x00,0x05, + 0x01}}, /* 0xd */ + {{0x7f,0x63,0x63,0x83,0x6c,0x1c,0x72,0xf0, + 0x58,0x8c,0x57,0x57,0x73,0x20,0x00,0x06, + 0x01}}, /* 0xe */ + {{0x7d,0x63,0x63,0x81,0x6e,0x1d,0x98,0xf0, + 0x7c,0x82,0x57,0x57,0x99,0x00,0x00,0x06, + 0x01}}, /* 0xf */ + {{0x7f,0x63,0x63,0x83,0x69,0x13,0x6f,0xf0, + 0x58,0x8b,0x57,0x57,0x70,0x20,0x00,0x06, + 0x01}}, /* 0x10 */ + {{0x7e,0x63,0x63,0x82,0x6b,0x13,0x75,0xf0, + 0x58,0x8b,0x57,0x57,0x76,0x20,0x00,0x06, + 0x01}}, /* 0x11 */ + {{0x81,0x63,0x63,0x85,0x6d,0x18,0x7a,0xf0, + 0x58,0x8b,0x57,0x57,0x7b,0x20,0x00,0x06, + 0x61}}, /* 0x12 */ + {{0x83,0x63,0x63,0x87,0x6e,0x19,0x81,0xf0, + 0x58,0x8b,0x57,0x57,0x82,0x20,0x00,0x06, + 0x61}}, /* 0x13 */ + {{0x85,0x63,0x63,0x89,0x6f,0x1a,0x91,0xf0, + 0x58,0x8b,0x57,0x57,0x92,0x20,0x00,0x06, + 0x61}}, /* 0x14 */ + {{0x99,0x7f,0x7f,0x9d,0x84,0x1a,0x96,0x1f, + 0x7f,0x83,0x7f,0x7f,0x97,0x10,0x00,0x02, + 0x00}}, /* 0x15 */ + {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x24,0xf5, + 0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x02, + 0x01}}, /* 0x16 */ + {{0xa1,0x7f,0x7f,0x85,0x86,0x97,0x24,0xf5, + 0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x02, + 0x01}}, /* 0x17 */ + {{0x9f,0x7f,0x7f,0x83,0x85,0x91,0x1e,0xf5, + 0x00,0x83,0xff,0xff,0x1f,0x10,0x00,0x02, + 0x01}}, /* 0x18 */ + {{0xa7,0x7f,0x7f,0x8b,0x89,0x95,0x26,0xf5, + 0x00,0x83,0xff,0xff,0x27,0x10,0x00,0x02, + 0x01}}, /* 0x19 */ + {{0xa9,0x7f,0x7f,0x8d,0x8c,0x9a,0x2c,0xf5, + 0x00,0x83,0xff,0xff,0x2d,0x14,0x00,0x02, + 0x62}}, /* 0x1a */ + {{0xab,0x7f,0x7f,0x8f,0x8d,0x9b,0x35,0xf5, + 0x00,0x83,0xff,0xff,0x36,0x14,0x00,0x02, + 0x62}}, /* 0x1b */ + {{0xcf,0x9f,0x9f,0x93,0xb2,0x01,0x14,0xba, + 0x00,0x83,0xff,0xff,0x15,0x00,0x00,0x03, + 0x00}}, /* 0x1c */ + {{0xce,0x9f,0x9f,0x92,0xa9,0x17,0x28,0x5a, + 0x00,0x83,0xff,0xff,0x29,0x09,0x00,0x07, + 0x01}}, /* 0x1d */ + {{0xce,0x9f,0x9f,0x92,0xa5,0x17,0x28,0x5a, + 0x00,0x83,0xff,0xff,0x29,0x09,0x00,0x07, + 0x01}}, /* 0x1e */ + {{0xd3,0x9f,0x9f,0x97,0xab,0x1f,0x2e,0x5a, + 0x00,0x83,0xff,0xff,0x2f,0x09,0x00,0x07, + 0x01}}, /* 0x1f */ + {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10, + 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04, + 0x00}}, /* 0x20 */ + {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10, + 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04, + 0x00}}, /* 0x21 */ + {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10, + 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04, + 0x00}}, /* 0x22 */ + {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10, + 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04, + 0x00}}, /* 0x23 */ + {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10, + 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04, + 0x00}}, /* 0x24 */ + {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10, + 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04, + 0x00}}, /* 0x25 */ + {{0x09,0xc7,0xc7,0x8d,0xd3,0x0b,0xe0,0x10, + 0xb0,0x83,0xaf,0xaf,0xe1,0x2f,0x01,0x04, + 0x00}}, /* 0x26 */ + {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f, + 0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01, + 0x00}}, /* 0x27 */ + {{0x43,0xef,0xef,0x87,0x06,0x00,0xd4,0x1f, + 0xa0,0x83,0x9f,0x9f,0xd5,0x1f,0x41,0x05, + 0x63}}, /* 0x28 */ + {{0x45,0xef,0xef,0x89,0x07,0x01,0xd9,0x1f, + 0xa0,0x83,0x9f,0x9f,0xda,0x1f,0x41,0x05, + 0x63}}, /* 0x29 */ + {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f, + 0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01, + 0x00}}, /* 0x2a */ + {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f, + 0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01, + 0x00}}, /* 0x2b */ + {{0x40,0xef,0xef,0x84,0x03,0x1d,0xda,0x1f, + 0xa0,0x83,0x9f,0x9f,0xdb,0x1f,0x41,0x01, + 0x00}}, /* 0x2c */ + {{0x59,0xff,0xff,0x9d,0x17,0x13,0x33,0xba, + 0x00,0x83,0xff,0xff,0x34,0x0f,0x41,0x05, + 0x44}}, /* 0x2d */ + {{0x5b,0xff,0xff,0x9f,0x18,0x14,0x38,0xba, + 0x00,0x83,0xff,0xff,0x39,0x0f,0x41,0x05, + 0x44}}, /* 0x2e */ + {{0x5b,0xff,0xff,0x9f,0x18,0x14,0x3d,0xba, + 0x00,0x83,0xff,0xff,0x3e,0x0f,0x41,0x05, + 0x44}}, /* 0x2f */ + {{0x5d,0xff,0xff,0x81,0x19,0x95,0x41,0xba, + 0x00,0x84,0xff,0xff,0x42,0x0f,0x41,0x05, + 0x44}}, /* 0x30 */ + {{0x55,0xff,0xff,0x99,0x0d,0x0c,0x3e,0xba, + 0x00,0x84,0xff,0xff,0x3f,0x0f,0x41,0x05, + 0x00}}, /* 0x31 */ + {{0x7f,0x63,0x63,0x83,0x6c,0x1c,0x72,0xba, + 0x27,0x8b,0xdf,0xdf,0x73,0x00,0x00,0x06, + 0x01}}, /* 0x32 */ + {{0x7f,0x63,0x63,0x83,0x69,0x13,0x6f,0xba, + 0x26,0x89,0xdf,0xdf,0x6f,0x00,0x00,0x06, + 0x01}}, /* 0x33 */ + {{0x7f,0x63,0x63,0x82,0x6b,0x13,0x75,0xba, + 0x29,0x8c,0xdf,0xdf,0x75,0x00,0x00,0x06, + 0x01}}, /* 0x34 */ + {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x24,0xf1, + 0xaf,0x85,0x3f,0x3f,0x25,0x30,0x00,0x02, + 0x01}}, /* 0x35 */ + {{0x9f,0x7f,0x7f,0x83,0x85,0x91,0x1e,0xf1, + 0xad,0x81,0x3f,0x3f,0x1f,0x30,0x00,0x02, + 0x01}}, /* 0x36 */ + {{0xa7,0x7f,0x7f,0x88,0x89,0x95,0x26,0xf1, + 0xb1,0x85,0x3f,0x3f,0x27,0x30,0x00,0x02, + 0x01}}, /* 0x37 */ + {{0xce,0x9f,0x9f,0x92,0xa9,0x17,0x28,0xc4, + 0x7a,0x8e,0xcf,0xcf,0x29,0x21,0x00,0x07, + 0x01}}, /* 0x38 */ + {{0xce,0x9f,0x9f,0x92,0xa5,0x17,0x28,0xd4, + 0x7a,0x8e,0xcf,0xcf,0x29,0x21,0x00,0x07, + 0x01}}, /* 0x39 */ + {{0xd3,0x9f,0x9f,0x97,0xab,0x1f,0x2e,0xd4, + 0x7d,0x81,0xcf,0xcf,0x2f,0x21,0x00,0x07, + 0x01}}, /* 0x3a */ + {{0xdc,0x9f,0x9f,0x80,0xaf,0x9d,0xe6,0xff, + 0xc0,0x83,0xbf,0xbf,0xe7,0x10,0x00,0x07, + 0x01}}, /* 0x3b */ + {{0x6b,0x59,0x59,0x8f,0x5e,0x8c,0x0b,0x3e, + 0xe9,0x8b,0xdf,0xe7,0x04,0x00,0x00,0x05, + 0x00}}, /* 0x3c */ + {{0x6d,0x59,0x59,0x91,0x60,0x89,0x53,0xf0, + 0x41,0x84,0x3f,0x3f,0x54,0x00,0x00,0x05, + 0x41}}, /* 0x3d */ + {{0x86,0x6a,0x6a,0x8a,0x74,0x06,0x8c,0x15, + 0x4f,0x83,0xef,0xef,0x8d,0x30,0x00,0x02, + 0x00}}, /* 0x3e */ + {{0x81,0x6a,0x6a,0x85,0x70,0x00,0x0f,0x3e, + 0xeb,0x8e,0xdf,0xdf,0x10,0x00,0x00,0x02, + 0x00}}, /* 0x3f */ + {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x1e,0xf1, + 0xae,0x85,0x57,0x57,0x1f,0x30,0x00,0x02, + 0x01}}, /* 0x40 */ + {{0xa3,0x7f,0x7f,0x87,0x86,0x97,0x24,0xf5, + 0x02,0x88,0xff,0xff,0x25,0x10,0x00,0x02, + 0x01}}, /* 0x41 */ + {{0xce,0x9f,0x9f,0x92,0xa9,0x17,0x20,0xf5, + 0x03,0x88,0xff,0xff,0x21,0x10,0x00,0x07, + 0x01}}, /* 0x42 */ + {{0xe6,0xae,0xae,0x8a,0xbd,0x90,0x3d,0x10, + 0x1a,0x8d,0x19,0x19,0x3e,0x2f,0x00,0x03, + 0x00}}, /* 0x43 */ + {{0xc3,0x8f,0x8f,0x87,0x9b,0x0b,0x82,0xef, + 0x60,0x83,0x5f,0x5f,0x83,0x10,0x00,0x07, + 0x01}}, /* 0x44 */ + {{0x86,0x69,0x69,0x8A,0x74,0x06,0x8C,0x15, + 0x4F,0x83,0xEF,0xEF,0x8D,0x30,0x00,0x02, + 0x00}}, /* 0x45 */ + {{0x83,0x69,0x69,0x87,0x6f,0x1d,0x03,0x3E, + 0xE5,0x8d,0xDF,0xe4,0x04,0x00,0x00,0x06, + 0x00}}, /* 0x46 */ + {{0x86,0x6A,0x6A,0x8A,0x74,0x06,0x8C,0x15, + 0x4F,0x83,0xEF,0xEF,0x8D,0x30,0x00,0x02, + 0x00}}, /* 0x47 */ + {{0x81,0x6A,0x6A,0x85,0x70,0x00,0x0F,0x3E, + 0xEB,0x8E,0xDF,0xDF,0x10,0x00,0x00,0x02, + 0x00}}, /* 0x48 */ + {{0xdd,0xa9,0xa9,0x81,0xb4,0x97,0x26,0xfd, + 0x01,0x8d,0xff,0x00,0x27,0x10,0x00,0x03, + 0x01}}, /* 0x49 */ + {{0xd9,0x8f,0x8f,0x9d,0xba,0x0a,0x8a,0xff, + 0x60,0x8b,0x5f,0x5f,0x8b,0x10,0x00,0x03, + 0x01}}, /* 0x4a */ + {{0xea,0xae,0xae,0x8e,0xba,0x82,0x40,0x10, + 0x1b,0x87,0x19,0x1a,0x41,0x0f,0x00,0x03, + 0x00}}, /* 0x4b */ + {{0xd3,0x9f,0x9f,0x97,0xab,0x1f,0xf1,0xff, + 0xc0,0x83,0xbf,0xbf,0xf2,0x10,0x00,0x07, + 0x01}}, /* 0x4c */ + {{0x75,0x5f,0x5f,0x99,0x66,0x90,0x53,0xf0, + 0x41,0x84,0x3f,0x3f,0x54,0x00,0x00,0x05, + 0x41}}, + {{0x2d,0x27,0x28,0x90,0x2c,0x80,0x0b,0x3e, + 0xe9,0x8b,0xdf,0xe7,0x04,0x00,0x00,0x00, + 0x00}}, /* 0x4e */ + {{0xcd,0x9f,0x9f,0x91,0xab,0x1c,0x3a,0xff, + 0x20,0x83,0x1f,0x1f,0x3b,0x10,0x00,0x07, + 0x21}}, /* 0x4f */ + {{0x15,0xd1,0xd1,0x99,0xe2,0x19,0x3d,0x10, + 0x1a,0x8d,0x19,0x19,0x3e,0x2f,0x01,0x0c, + 0x20}}, /* 0x50 */ + {{0x0e,0xef,0xef,0x92,0xfe,0x03,0x30,0xf0, + 0x1e,0x83,0x1b,0x1c,0x31,0x00,0x01,0x00, + 0x61}}, /* 0x51 */ + {{0x85,0x77,0x77,0x89,0x7d,0x01,0x31,0xf0, + 0x1e,0x84,0x1b,0x1c,0x32,0x00,0x00,0x02, + 0x41}}, /* 0x52 */ + {{0x87,0x77,0x77,0x8b,0x81,0x0b,0x68,0xf0, + 0x5a,0x80,0x57,0x57,0x69,0x00,0x00,0x02, + 0x01}}, /* 0x53 */ + {{0xcd,0x8f,0x8f,0x91,0x9b,0x1b,0x7a,0xff, + 0x64,0x8c,0x5f,0x62,0x7b,0x10,0x00,0x07, + 0x41}} /* 0x54 */ +}; + +static struct SiS_VCLKData SiSUSB_VCLKData[] = +{ + { 0x1b,0xe1, 25}, /* 0x00 */ + { 0x4e,0xe4, 28}, /* 0x01 */ + { 0x57,0xe4, 31}, /* 0x02 */ + { 0xc3,0xc8, 36}, /* 0x03 */ + { 0x42,0xe2, 40}, /* 0x04 */ + { 0xfe,0xcd, 43}, /* 0x05 */ + { 0x5d,0xc4, 44}, /* 0x06 */ + { 0x52,0xe2, 49}, /* 0x07 */ + { 0x53,0xe2, 50}, /* 0x08 */ + { 0x74,0x67, 52}, /* 0x09 */ + { 0x6d,0x66, 56}, /* 0x0a */ + { 0x5a,0x64, 65}, /* 0x0b */ + { 0x46,0x44, 67}, /* 0x0c */ + { 0xb1,0x46, 68}, /* 0x0d */ + { 0xd3,0x4a, 72}, /* 0x0e */ + { 0x29,0x61, 75}, /* 0x0f */ + { 0x6e,0x46, 76}, /* 0x10 */ + { 0x2b,0x61, 78}, /* 0x11 */ + { 0x31,0x42, 79}, /* 0x12 */ + { 0xab,0x44, 83}, /* 0x13 */ + { 0x46,0x25, 84}, /* 0x14 */ + { 0x78,0x29, 86}, /* 0x15 */ + { 0x62,0x44, 94}, /* 0x16 */ + { 0x2b,0x41,104}, /* 0x17 */ + { 0x3a,0x23,105}, /* 0x18 */ + { 0x70,0x44,108}, /* 0x19 */ + { 0x3c,0x23,109}, /* 0x1a */ + { 0x5e,0x43,113}, /* 0x1b */ + { 0xbc,0x44,116}, /* 0x1c */ + { 0xe0,0x46,132}, /* 0x1d */ + { 0x54,0x42,135}, /* 0x1e */ + { 0xea,0x2a,139}, /* 0x1f */ + { 0x41,0x22,157}, /* 0x20 */ + { 0x70,0x24,162}, /* 0x21 */ + { 0x30,0x21,175}, /* 0x22 */ + { 0x4e,0x22,189}, /* 0x23 */ + { 0xde,0x26,194}, /* 0x24 */ + { 0x62,0x06,202}, /* 0x25 */ + { 0x3f,0x03,229}, /* 0x26 */ + { 0xb8,0x06,234}, /* 0x27 */ + { 0x34,0x02,253}, /* 0x28 */ + { 0x58,0x04,255}, /* 0x29 */ + { 0x24,0x01,265}, /* 0x2a */ + { 0x9b,0x02,267}, /* 0x2b */ + { 0x70,0x05,270}, /* 0x2c */ + { 0x25,0x01,272}, /* 0x2d */ + { 0x9c,0x02,277}, /* 0x2e */ + { 0x27,0x01,286}, /* 0x2f */ + { 0x3c,0x02,291}, /* 0x30 */ + { 0xef,0x0a,292}, /* 0x31 */ + { 0xf6,0x0a,310}, /* 0x32 */ + { 0x95,0x01,315}, /* 0x33 */ + { 0xf0,0x09,324}, /* 0x34 */ + { 0xfe,0x0a,331}, /* 0x35 */ + { 0xf3,0x09,332}, /* 0x36 */ + { 0xea,0x08,340}, /* 0x37 */ + { 0xe8,0x07,376}, /* 0x38 */ + { 0xde,0x06,389}, /* 0x39 */ + { 0x52,0x2a, 54}, /* 0x3a 301 TV */ + { 0x52,0x6a, 27}, /* 0x3b 301 TV */ + { 0x62,0x24, 70}, /* 0x3c 301 TV */ + { 0x62,0x64, 70}, /* 0x3d 301 TV */ + { 0xa8,0x4c, 30}, /* 0x3e 301 TV */ + { 0x20,0x26, 33}, /* 0x3f 301 TV */ + { 0x31,0xc2, 39}, /* 0x40 */ + { 0x60,0x36, 30}, /* 0x41 Chrontel */ + { 0x40,0x4a, 28}, /* 0x42 Chrontel */ + { 0x9f,0x46, 44}, /* 0x43 Chrontel */ + { 0x97,0x2c, 26}, /* 0x44 */ + { 0x44,0xe4, 25}, /* 0x45 Chrontel */ + { 0x7e,0x32, 47}, /* 0x46 Chrontel */ + { 0x8a,0x24, 31}, /* 0x47 Chrontel */ + { 0x97,0x2c, 26}, /* 0x48 Chrontel */ + { 0xce,0x3c, 39}, /* 0x49 */ + { 0x52,0x4a, 36}, /* 0x4a Chrontel */ + { 0x34,0x61, 95}, /* 0x4b */ + { 0x78,0x27,108}, /* 0x4c - was 102 */ + { 0x66,0x43,123}, /* 0x4d Modes 0x26-0x28 (1400x1050) */ + { 0x41,0x4e, 21}, /* 0x4e */ + { 0xa1,0x4a, 29}, /* 0x4f Chrontel */ + { 0x19,0x42, 42}, /* 0x50 */ + { 0x54,0x46, 58}, /* 0x51 Chrontel */ + { 0x25,0x42, 61}, /* 0x52 */ + { 0x44,0x44, 66}, /* 0x53 Chrontel */ + { 0x3a,0x62, 70}, /* 0x54 Chrontel */ + { 0x62,0xc6, 34}, /* 0x55 848x480-60 */ + { 0x6a,0xc6, 37}, /* 0x56 848x480-75 - TEMP */ + { 0xbf,0xc8, 35}, /* 0x57 856x480-38i,60 */ + { 0x30,0x23, 88}, /* 0x58 1360x768-62 (is 60Hz!) */ + { 0x52,0x07,149}, /* 0x59 1280x960-85 */ + { 0x56,0x07,156}, /* 0x5a 1400x1050-75 */ + { 0x70,0x29, 81}, /* 0x5b 1280x768 LCD */ + { 0x45,0x25, 83}, /* 0x5c 1280x800 */ + { 0x70,0x0a,147}, /* 0x5d 1680x1050 */ + { 0x70,0x24,162}, /* 0x5e 1600x1200 */ + { 0x5a,0x64, 65}, /* 0x5f 1280x720 - temp */ + { 0x63,0x46, 68}, /* 0x60 1280x768_2 */ + { 0x31,0x42, 79}, /* 0x61 1280x768_3 - temp */ + { 0, 0, 0}, /* 0x62 - custom (will be filled out at run-time) */ + { 0x5a,0x64, 65}, /* 0x63 1280x720 (LCD LVDS) */ + { 0x70,0x28, 90}, /* 0x64 1152x864@60 */ + { 0x41,0xc4, 32}, /* 0x65 848x480@60 */ + { 0x5c,0xc6, 32}, /* 0x66 856x480@60 */ + { 0x76,0xe7, 27}, /* 0x67 720x480@60 */ + { 0x5f,0xc6, 33}, /* 0x68 720/768x576@60 */ + { 0x52,0x27, 75}, /* 0x69 1920x1080i 60Hz interlaced */ + { 0x7c,0x6b, 38}, /* 0x6a 960x540@60 */ + { 0xe3,0x56, 41}, /* 0x6b 960x600@60 */ + { 0x45,0x25, 83}, /* 0x6c 1280x800 */ + { 0x70,0x28, 90}, /* 0x6d 1152x864@60 */ + { 0x15,0xe1, 20}, /* 0x6e 640x400@60 (fake, not actually used) */ + { 0x5f,0xc6, 33}, /* 0x6f 720x576@60 */ + { 0x37,0x5a, 10}, /* 0x70 320x200@60 (fake, not actually used) */ + { 0x2b,0xc2, 35} /* 0x71 768@576@60 */ +}; + +void SiSUSBRegInit(struct SiS_Private *SiS_Pr, unsigned long BaseAddr); +unsigned short SiSUSB_GetModeID(int HDisplay, int VDisplay, int Depth); +int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo); +int SiSUSBSetVESAMode(struct SiS_Private *SiS_Pr, unsigned short VModeNo); + +extern int sisusb_setreg(struct sisusb_usb_data *sisusb, int port, u8 data); +extern int sisusb_getreg(struct sisusb_usb_data *sisusb, int port, u8 *data); +extern int sisusb_setidxreg(struct sisusb_usb_data *sisusb, int port, + u8 index, u8 data); +extern int sisusb_getidxreg(struct sisusb_usb_data *sisusb, int port, + u8 index, u8 *data); +extern int sisusb_setidxregandor(struct sisusb_usb_data *sisusb, int port, + u8 idx, u8 myand, u8 myor); +extern int sisusb_setidxregor(struct sisusb_usb_data *sisusb, int port, + u8 index, u8 myor); +extern int sisusb_setidxregand(struct sisusb_usb_data *sisusb, int port, + u8 idx, u8 myand); + +#endif + diff --git a/drivers/usb/misc/sisusbvga/sisusb_struct.h b/drivers/usb/misc/sisusbvga/sisusb_struct.h new file mode 100644 index 00000000000..94edd4726c4 --- /dev/null +++ b/drivers/usb/misc/sisusbvga/sisusb_struct.h @@ -0,0 +1,169 @@ +/* + * General structure definitions for universal mode switching modules + * + * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria + * + * If distributed as part of the Linux kernel, the following license terms + * apply: + * + * * This program is free software; you can redistribute it and/or modify + * * it under the terms of the GNU General Public License as published by + * * the Free Software Foundation; either version 2 of the named License, + * * or any later version. + * * + * * This program is distributed in the hope that it will be useful, + * * but WITHOUT ANY WARRANTY; without even the implied warranty of + * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * * GNU General Public License for more details. + * * + * * You should have received a copy of the GNU General Public License + * * along with this program; if not, write to the Free Software + * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA + * + * Otherwise, the following license terms apply: + * + * * Redistribution and use in source and binary forms, with or without + * * modification, are permitted provided that the following conditions + * * are met: + * * 1) Redistributions of source code must retain the above copyright + * * notice, this list of conditions and the following disclaimer. + * * 2) Redistributions in binary form must reproduce the above copyright + * * notice, this list of conditions and the following disclaimer in the + * * documentation and/or other materials provided with the distribution. + * * 3) The name of the author may not be used to endorse or promote products + * * derived from this software without specific prior written permission. + * * + * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Author: Thomas Winischhofer <thomas@winischhofer.net> + * + */ + +#ifndef _SISUSB_STRUCT_H_ +#define _SISUSB_STRUCT_H_ + +struct SiS_St { + unsigned char St_ModeID; + unsigned short St_ModeFlag; + unsigned char St_StTableIndex; + unsigned char St_CRT2CRTC; + unsigned char St_ResInfo; + unsigned char VB_StTVFlickerIndex; + unsigned char VB_StTVEdgeIndex; + unsigned char VB_StTVYFilterIndex; + unsigned char St_PDC; +}; + +struct SiS_StandTable +{ + unsigned char CRT_COLS; + unsigned char ROWS; + unsigned char CHAR_HEIGHT; + unsigned short CRT_LEN; + unsigned char SR[4]; + unsigned char MISC; + unsigned char CRTC[0x19]; + unsigned char ATTR[0x14]; + unsigned char GRC[9]; +}; + +struct SiS_StResInfo_S { + unsigned short HTotal; + unsigned short VTotal; +}; + +struct SiS_Ext +{ + unsigned char Ext_ModeID; + unsigned short Ext_ModeFlag; + unsigned short Ext_VESAID; + unsigned char Ext_RESINFO; + unsigned char VB_ExtTVFlickerIndex; + unsigned char VB_ExtTVEdgeIndex; + unsigned char VB_ExtTVYFilterIndex; + unsigned char VB_ExtTVYFilterIndexROM661; + unsigned char REFindex; + char ROMMODEIDX661; +}; + +struct SiS_Ext2 +{ + unsigned short Ext_InfoFlag; + unsigned char Ext_CRT1CRTC; + unsigned char Ext_CRTVCLK; + unsigned char Ext_CRT2CRTC; + unsigned char Ext_CRT2CRTC_NS; + unsigned char ModeID; + unsigned short XRes; + unsigned short YRes; + unsigned char Ext_PDC; + unsigned char Ext_FakeCRT2CRTC; + unsigned char Ext_FakeCRT2Clk; +}; + +struct SiS_CRT1Table +{ + unsigned char CR[17]; +}; + +struct SiS_VCLKData +{ + unsigned char SR2B,SR2C; + unsigned short CLOCK; +}; + +struct SiS_ModeResInfo +{ + unsigned short HTotal; + unsigned short VTotal; + unsigned char XChar; + unsigned char YChar; +}; + +struct SiS_Private +{ + void *sisusb; + + unsigned long IOAddress; + + unsigned long SiS_P3c4; + unsigned long SiS_P3d4; + unsigned long SiS_P3c0; + unsigned long SiS_P3ce; + unsigned long SiS_P3c2; + unsigned long SiS_P3ca; + unsigned long SiS_P3c6; + unsigned long SiS_P3c7; + unsigned long SiS_P3c8; + unsigned long SiS_P3c9; + unsigned long SiS_P3cb; + unsigned long SiS_P3cc; + unsigned long SiS_P3cd; + unsigned long SiS_P3da; + unsigned long SiS_Part1Port; + + unsigned char SiS_MyCR63; + unsigned short SiS_CRT1Mode; + unsigned short SiS_ModeType; + unsigned short SiS_SetFlag; + + const struct SiS_StandTable *SiS_StandTable; + const struct SiS_St *SiS_SModeIDTable; + const struct SiS_Ext *SiS_EModeIDTable; + const struct SiS_Ext2 *SiS_RefIndex; + const struct SiS_CRT1Table *SiS_CRT1Table; + struct SiS_VCLKData *SiS_VCLKData; + const struct SiS_ModeResInfo *SiS_ModeResInfo; +}; + +#endif + diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index faa74436de5..03fb70ef2eb 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -3,8 +3,8 @@ /* * uss720.c -- USS720 USB Parport Cable. * - * Copyright (C) 1999 - * Thomas Sailer (sailer@ife.ee.ethz.ch) + * Copyright (C) 1999, 2005 + * Thomas Sailer (t.sailer@alumni.ethz.ch) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -23,103 +23,240 @@ * Based on parport_pc.c * * History: - * 0.1 04.08.99 Created - * 0.2 07.08.99 Some fixes mainly suggested by Tim Waugh - * Interrupt handling currently disabled because - * usb_request_irq crashes somewhere within ohci.c - * for no apparent reason (that is for me, anyway) - * ECP currently untested - * 0.3 10.08.99 fixing merge errors - * 0.4 13.08.99 Added Vendor/Product ID of Brad Hard's cable - * 0.5 20.09.99 usb_control_msg wrapper used - * Nov01.00 usb_device_table support by Adam J. Richter - * 08.04.01 Identify version on module load. gb + * 0.1 04.08.1999 Created + * 0.2 07.08.1999 Some fixes mainly suggested by Tim Waugh + * Interrupt handling currently disabled because + * usb_request_irq crashes somewhere within ohci.c + * for no apparent reason (that is for me, anyway) + * ECP currently untested + * 0.3 10.08.1999 fixing merge errors + * 0.4 13.08.1999 Added Vendor/Product ID of Brad Hard's cable + * 0.5 20.09.1999 usb_control_msg wrapper used + * Nov01.2000 usb_device_table support by Adam J. Richter + * 08.04.2001 Identify version on module load. gb + * 0.6 02.09.2005 Fix "scheduling in interrupt" problem by making save/restore + * context asynchronous * */ /*****************************************************************************/ +#define DEBUG + #include <linux/module.h> #include <linux/socket.h> #include <linux/parport.h> #include <linux/init.h> #include <linux/usb.h> #include <linux/delay.h> +#include <linux/completion.h> +#include <linux/kref.h> /* * Version Information */ -#define DRIVER_VERSION "v0.5" -#define DRIVER_AUTHOR "Thomas M. Sailer, sailer@ife.ee.ethz.ch" +#define DRIVER_VERSION "v0.6" +#define DRIVER_AUTHOR "Thomas M. Sailer, t.sailer@alumni.ethz.ch" #define DRIVER_DESC "USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip" /* --------------------------------------------------------------------- */ struct parport_uss720_private { struct usb_device *usbdev; - void *irqhandle; - unsigned int irqpipe; - unsigned char reg[7]; /* USB registers */ + struct parport *pp; + struct kref ref_count; + __u8 reg[7]; /* USB registers */ + struct list_head asynclist; + spinlock_t asynclock; +}; + +struct uss720_async_request { + struct parport_uss720_private *priv; + struct kref ref_count; + struct list_head asynclist; + struct completion compl; + struct urb *urb; + struct usb_ctrlrequest dr; + __u8 reg[7]; }; /* --------------------------------------------------------------------- */ -static int get_1284_register(struct parport *pp, unsigned char reg, unsigned char *val) +static void destroy_priv(struct kref *kref) { - struct parport_uss720_private *priv = pp->private_data; - struct usb_device *usbdev = priv->usbdev; - static const unsigned char regindex[9] = { - 4, 0, 1, 5, 5, 0, 2, 3, 6 - }; - int ret; + struct parport_uss720_private *priv = container_of(kref, struct parport_uss720_private, ref_count); - if (!usbdev) - return -1; - ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev,0), 3, 0xc0, ((unsigned int)reg) << 8, 0, priv->reg, 7, 1000); - if (ret != 7) { - printk(KERN_DEBUG "uss720: get_1284_register(%d) failed, status 0x%x expected 7\n", - (unsigned int)reg, ret); - ret = -1; - } else { + usb_put_dev(priv->usbdev); + kfree(priv); + dbg("destroying priv datastructure"); +} + +static void destroy_async(struct kref *kref) +{ + struct uss720_async_request *rq = container_of(kref, struct uss720_async_request, ref_count); + struct parport_uss720_private *priv = rq->priv; + unsigned long flags; + + if (likely(rq->urb)) + usb_free_urb(rq->urb); + spin_lock_irqsave(&priv->asynclock, flags); + list_del_init(&rq->asynclist); + spin_unlock_irqrestore(&priv->asynclock, flags); + kfree(rq); + kref_put(&priv->ref_count, destroy_priv); +} + +/* --------------------------------------------------------------------- */ + +static void async_complete(struct urb *urb, struct pt_regs *ptregs) +{ + struct uss720_async_request *rq; + struct parport *pp; + struct parport_uss720_private *priv; + + rq = urb->context; + priv = rq->priv; + pp = priv->pp; + if (urb->status) { + err("async_complete: urb error %d", urb->status); + } else if (rq->dr.bRequest == 3) { + memcpy(priv->reg, rq->reg, sizeof(priv->reg)); #if 0 - printk(KERN_DEBUG "uss720: get_1284_register(%d) return %02x %02x %02x %02x %02x %02x %02x\n", - (unsigned int)reg, (unsigned int)priv->reg[0], (unsigned int)priv->reg[1], - (unsigned int)priv->reg[2], (unsigned int)priv->reg[3], (unsigned int)priv->reg[4], - (unsigned int)priv->reg[5], (unsigned int)priv->reg[6]); + dbg("async_complete regs %02x %02x %02x %02x %02x %02x %02x", + (unsigned int)priv->reg[0], (unsigned int)priv->reg[1], (unsigned int)priv->reg[2], + (unsigned int)priv->reg[3], (unsigned int)priv->reg[4], (unsigned int)priv->reg[5], + (unsigned int)priv->reg[6]); #endif /* if nAck interrupts are enabled and we have an interrupt, call the interrupt procedure */ - if (priv->reg[2] & priv->reg[1] & 0x10) + if (rq->reg[2] & rq->reg[1] & 0x10 && pp) parport_generic_irq(0, pp, NULL); - ret = 0; } - if (val) - *val = priv->reg[(reg >= 9) ? 0 : regindex[reg]]; - return ret; + complete(&rq->compl); + kref_put(&rq->ref_count, destroy_async); } -static int set_1284_register(struct parport *pp, unsigned char reg, unsigned char val) +static struct uss720_async_request *submit_async_request(struct parport_uss720_private *priv, + __u8 request, __u8 requesttype, __u16 value, __u16 index, + unsigned int mem_flags) { - struct parport_uss720_private *priv = pp->private_data; - struct usb_device *usbdev = priv->usbdev; + struct usb_device *usbdev; + struct uss720_async_request *rq; + unsigned long flags; int ret; + if (!priv) + return NULL; + usbdev = priv->usbdev; if (!usbdev) - return -1; - ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev,0), 4, 0x40, (((unsigned int)reg) << 8) | val, 0, NULL, 0, 1000); - if (ret) { - printk(KERN_DEBUG "uss720: set_1284_register(%u,0x%02x) failed, status 0x%x\n", - (unsigned int)reg, (unsigned int)val, ret); - } else { -#if 0 - printk(KERN_DEBUG "uss720: set_1284_register(%u,0x%02x)\n", - (unsigned int)reg, (unsigned int)val); -#endif + return NULL; + rq = kmalloc(sizeof(struct uss720_async_request), mem_flags); + if (!rq) { + err("submit_async_request out of memory"); + return NULL; + } + kref_init(&rq->ref_count); + INIT_LIST_HEAD(&rq->asynclist); + init_completion(&rq->compl); + kref_get(&priv->ref_count); + rq->priv = priv; + rq->urb = usb_alloc_urb(0, mem_flags); + if (!rq->urb) { + kref_put(&rq->ref_count, destroy_async); + err("submit_async_request out of memory"); + return NULL; + } + rq->dr.bRequestType = requesttype; + rq->dr.bRequest = request; + rq->dr.wValue = cpu_to_le16(value); + rq->dr.wIndex = cpu_to_le16(index); + rq->dr.wLength = cpu_to_le16((request == 3) ? sizeof(rq->reg) : 0); + usb_fill_control_urb(rq->urb, usbdev, (requesttype & 0x80) ? usb_rcvctrlpipe(usbdev, 0) : usb_sndctrlpipe(usbdev, 0), + (unsigned char *)&rq->dr, + (request == 3) ? rq->reg : NULL, (request == 3) ? sizeof(rq->reg) : 0, async_complete, rq); + /* rq->urb->transfer_flags |= URB_ASYNC_UNLINK; */ + spin_lock_irqsave(&priv->asynclock, flags); + list_add_tail(&rq->asynclist, &priv->asynclist); + spin_unlock_irqrestore(&priv->asynclock, flags); + ret = usb_submit_urb(rq->urb, mem_flags); + if (!ret) { + kref_get(&rq->ref_count); + return rq; } + kref_put(&rq->ref_count, destroy_async); + err("submit_async_request submit_urb failed with %d", ret); + return NULL; +} + +static unsigned int kill_all_async_requests_priv(struct parport_uss720_private *priv) +{ + struct uss720_async_request *rq; + unsigned long flags; + unsigned int ret = 0; + + spin_lock_irqsave(&priv->asynclock, flags); + list_for_each_entry(rq, &priv->asynclist, asynclist) { + usb_unlink_urb(rq->urb); + ret++; + } + spin_unlock_irqrestore(&priv->asynclock, flags); return ret; } /* --------------------------------------------------------------------- */ +static int get_1284_register(struct parport *pp, unsigned char reg, unsigned char *val, unsigned int mem_flags) +{ + struct parport_uss720_private *priv; + struct uss720_async_request *rq; + static const unsigned char regindex[9] = { + 4, 0, 1, 5, 5, 0, 2, 3, 6 + }; + int ret; + + if (!pp) + return -EIO; + priv = pp->private_data; + rq = submit_async_request(priv, 3, 0xc0, ((unsigned int)reg) << 8, 0, mem_flags); + if (!rq) { + err("get_1284_register(%u) failed", (unsigned int)reg); + return -EIO; + } + if (!val) { + kref_put(&rq->ref_count, destroy_async); + return 0; + } + if (wait_for_completion_timeout(&rq->compl, HZ)) { + ret = rq->urb->status; + *val = priv->reg[(reg >= 9) ? 0 : regindex[reg]]; + if (ret) + warn("get_1284_register: usb error %d", ret); + kref_put(&rq->ref_count, destroy_async); + return ret; + } + warn("get_1284_register timeout"); + kill_all_async_requests_priv(priv); + return -EIO; +} + +static int set_1284_register(struct parport *pp, unsigned char reg, unsigned char val, unsigned int mem_flags) +{ + struct parport_uss720_private *priv; + struct uss720_async_request *rq; + + if (!pp) + return -EIO; + priv = pp->private_data; + rq = submit_async_request(priv, 4, 0x40, (((unsigned int)reg) << 8) | val, 0, mem_flags); + if (!rq) { + err("set_1284_register(%u,%u) failed", (unsigned int)reg, (unsigned int)val); + return -EIO; + } + kref_put(&rq->ref_count, destroy_async); + return 0; +} + +/* --------------------------------------------------------------------- */ + /* ECR modes */ #define ECR_SPP 00 #define ECR_PS2 01 @@ -132,8 +269,9 @@ static int change_mode(struct parport *pp, int m) { struct parport_uss720_private *priv = pp->private_data; int mode; + __u8 reg; - if (get_1284_register(pp, 6, NULL)) + if (get_1284_register(pp, 6, ®, GFP_KERNEL)) return -EIO; /* Bits <7:5> contain the mode. */ mode = (priv->reg[2] >> 5) & 0x7; @@ -153,7 +291,7 @@ static int change_mode(struct parport *pp, int m) case ECR_ECP: /* ECP Parallel Port mode */ /* Poll slowly. */ for (;;) { - if (get_1284_register(pp, 6, NULL)) + if (get_1284_register(pp, 6, ®, GFP_KERNEL)) return -EIO; if (priv->reg[2] & 0x01) break; @@ -167,7 +305,9 @@ static int change_mode(struct parport *pp, int m) } } /* Set the mode. */ - if (set_1284_register(pp, 6, m << 5)) + if (set_1284_register(pp, 6, m << 5, GFP_KERNEL)) + return -EIO; + if (get_1284_register(pp, 6, ®, GFP_KERNEL)) return -EIO; return 0; } @@ -179,7 +319,7 @@ static int clear_epp_timeout(struct parport *pp) { unsigned char stat; - if (get_1284_register(pp, 1, &stat)) + if (get_1284_register(pp, 1, &stat, GFP_KERNEL)) return 1; return stat & 1; } @@ -205,14 +345,14 @@ static int uss720_irq(int usbstatus, void *buffer, int len, void *dev_id) static void parport_uss720_write_data(struct parport *pp, unsigned char d) { - set_1284_register(pp, 0, d); + set_1284_register(pp, 0, d, GFP_KERNEL); } static unsigned char parport_uss720_read_data(struct parport *pp) { unsigned char ret; - if (get_1284_register(pp, 0, &ret)) + if (get_1284_register(pp, 0, &ret, GFP_KERNEL)) return 0; return ret; } @@ -222,7 +362,7 @@ static void parport_uss720_write_control(struct parport *pp, unsigned char d) struct parport_uss720_private *priv = pp->private_data; d = (d & 0xf) | (priv->reg[1] & 0xf0); - if (set_1284_register(pp, 2, d)) + if (set_1284_register(pp, 2, d, GFP_KERNEL)) return; priv->reg[1] = d; } @@ -241,7 +381,7 @@ static unsigned char parport_uss720_frob_control(struct parport *pp, unsigned ch mask &= 0x0f; val &= 0x0f; d = (priv->reg[1] & (~mask)) ^ val; - if (set_1284_register(pp, 2, d)) + if (set_1284_register(pp, 2, d, GFP_KERNEL)) return 0; priv->reg[1] = d; return d & 0xf; @@ -251,7 +391,7 @@ static unsigned char parport_uss720_read_status(struct parport *pp) { unsigned char ret; - if (get_1284_register(pp, 1, &ret)) + if (get_1284_register(pp, 1, &ret, GFP_KERNEL)) return 0; return ret & 0xf8; } @@ -262,7 +402,7 @@ static void parport_uss720_disable_irq(struct parport *pp) unsigned char d; d = priv->reg[1] & ~0x10; - if (set_1284_register(pp, 2, d)) + if (set_1284_register(pp, 2, d, GFP_KERNEL)) return; priv->reg[1] = d; } @@ -273,7 +413,7 @@ static void parport_uss720_enable_irq(struct parport *pp) unsigned char d; d = priv->reg[1] | 0x10; - if (set_1284_register(pp, 2, d)) + if (set_1284_register(pp, 2, d, GFP_KERNEL)) return; priv->reg[1] = d; } @@ -284,7 +424,7 @@ static void parport_uss720_data_forward (struct parport *pp) unsigned char d; d = priv->reg[1] & ~0x20; - if (set_1284_register(pp, 2, d)) + if (set_1284_register(pp, 2, d, GFP_KERNEL)) return; priv->reg[1] = d; } @@ -295,7 +435,7 @@ static void parport_uss720_data_reverse (struct parport *pp) unsigned char d; d = priv->reg[1] | 0x20; - if (set_1284_register(pp, 2, d)) + if (set_1284_register(pp, 2, d, GFP_KERNEL)) return; priv->reg[1] = d; } @@ -310,17 +450,23 @@ static void parport_uss720_save_state(struct parport *pp, struct parport_state * { struct parport_uss720_private *priv = pp->private_data; - if (get_1284_register(pp, 2, NULL)) +#if 0 + if (get_1284_register(pp, 2, NULL, GFP_ATOMIC)) return; +#endif s->u.pc.ctr = priv->reg[1]; s->u.pc.ecr = priv->reg[2]; } static void parport_uss720_restore_state(struct parport *pp, struct parport_state *s) { - set_1284_register(pp, 2, s->u.pc.ctr); - set_1284_register(pp, 6, s->u.pc.ecr); - get_1284_register(pp, 2, NULL); + struct parport_uss720_private *priv = pp->private_data; + + set_1284_register(pp, 2, s->u.pc.ctr, GFP_ATOMIC); + set_1284_register(pp, 6, s->u.pc.ecr, GFP_ATOMIC); + get_1284_register(pp, 2, NULL, GFP_ATOMIC); + priv->reg[1] = s->u.pc.ctr; + priv->reg[2] = s->u.pc.ecr; } static size_t parport_uss720_epp_read_data(struct parport *pp, void *buf, size_t length, int flags) @@ -331,7 +477,7 @@ static size_t parport_uss720_epp_read_data(struct parport *pp, void *buf, size_t if (change_mode(pp, ECR_EPP)) return 0; for (; got < length; got++) { - if (get_1284_register(pp, 4, (char *)buf)) + if (get_1284_register(pp, 4, (char *)buf, GFP_KERNEL)) break; buf++; if (priv->reg[0] & 0x01) { @@ -352,10 +498,10 @@ static size_t parport_uss720_epp_write_data(struct parport *pp, const void *buf, if (change_mode(pp, ECR_EPP)) return 0; for (; written < length; written++) { - if (set_1284_register(pp, 4, (char *)buf)) + if (set_1284_register(pp, 4, (char *)buf, GFP_KERNEL)) break; ((char*)buf)++; - if (get_1284_register(pp, 1, NULL)) + if (get_1284_register(pp, 1, NULL, GFP_KERNEL)) break; if (priv->reg[0] & 0x01) { clear_epp_timeout(pp); @@ -390,7 +536,7 @@ static size_t parport_uss720_epp_read_addr(struct parport *pp, void *buf, size_t if (change_mode(pp, ECR_EPP)) return 0; for (; got < length; got++) { - if (get_1284_register(pp, 3, (char *)buf)) + if (get_1284_register(pp, 3, (char *)buf, GFP_KERNEL)) break; buf++; if (priv->reg[0] & 0x01) { @@ -410,10 +556,10 @@ static size_t parport_uss720_epp_write_addr(struct parport *pp, const void *buf, if (change_mode(pp, ECR_EPP)) return 0; for (; written < length; written++) { - if (set_1284_register(pp, 3, *(char *)buf)) + if (set_1284_register(pp, 3, *(char *)buf, GFP_KERNEL)) break; buf++; - if (get_1284_register(pp, 1, NULL)) + if (get_1284_register(pp, 1, NULL, GFP_KERNEL)) break; if (priv->reg[0] & 0x01) { clear_epp_timeout(pp); @@ -467,7 +613,7 @@ static size_t parport_uss720_ecp_write_addr(struct parport *pp, const void *buff if (change_mode(pp, ECR_ECP)) return 0; for (; written < len; written++) { - if (set_1284_register(pp, 5, *(char *)buffer)) + if (set_1284_register(pp, 5, *(char *)buffer, GFP_KERNEL)) break; buffer++; } @@ -536,93 +682,91 @@ static struct parport_operations parport_uss720_ops = static int uss720_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct usb_device *usbdev = interface_to_usbdev(intf); + struct usb_device *usbdev = usb_get_dev(interface_to_usbdev(intf)); struct usb_host_interface *interface; struct usb_host_endpoint *endpoint; struct parport_uss720_private *priv; struct parport *pp; + unsigned char reg; int i; - printk(KERN_DEBUG "uss720: probe: vendor id 0x%x, device id 0x%x\n", - le16_to_cpu(usbdev->descriptor.idVendor), - le16_to_cpu(usbdev->descriptor.idProduct)); + dbg("probe: vendor id 0x%x, device id 0x%x\n", + le16_to_cpu(usbdev->descriptor.idVendor), + le16_to_cpu(usbdev->descriptor.idProduct)); /* our known interfaces have 3 alternate settings */ - if (intf->num_altsetting != 3) + if (intf->num_altsetting != 3) { + usb_put_dev(usbdev); return -ENODEV; - + } i = usb_set_interface(usbdev, intf->altsetting->desc.bInterfaceNumber, 2); - printk(KERN_DEBUG "uss720: set inteface result %d\n", i); + dbg("set inteface result %d", i); interface = intf->cur_altsetting; /* * Allocate parport interface */ - printk(KERN_INFO "uss720: (C) 1999 by Thomas Sailer, <sailer@ife.ee.ethz.ch>\n"); - - if (!(priv = kmalloc(sizeof(struct parport_uss720_private), GFP_KERNEL))) + if (!(priv = kcalloc(sizeof(struct parport_uss720_private), 1, GFP_KERNEL))) { + usb_put_dev(usbdev); return -ENOMEM; + } + priv->pp = NULL; + priv->usbdev = usbdev; + kref_init(&priv->ref_count); + spin_lock_init(&priv->asynclock); + INIT_LIST_HEAD(&priv->asynclist); if (!(pp = parport_register_port(0, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &parport_uss720_ops))) { - printk(KERN_WARNING "usb-uss720: could not register parport\n"); + warn("could not register parport"); goto probe_abort; } + priv->pp = pp; pp->private_data = priv; - priv->usbdev = usbdev; pp->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_TRISTATE | PARPORT_MODE_EPP | PARPORT_MODE_ECP | PARPORT_MODE_COMPAT; /* set the USS720 control register to manual mode, no ECP compression, enable all ints */ - set_1284_register(pp, 7, 0x00); - set_1284_register(pp, 6, 0x30); /* PS/2 mode */ - set_1284_register(pp, 2, 0x0c); + set_1284_register(pp, 7, 0x00, GFP_KERNEL); + set_1284_register(pp, 6, 0x30, GFP_KERNEL); /* PS/2 mode */ + set_1284_register(pp, 2, 0x0c, GFP_KERNEL); /* debugging */ - get_1284_register(pp, 0, NULL); - printk("uss720: reg: %02x %02x %02x %02x %02x %02x %02x\n", - priv->reg[0], priv->reg[1], priv->reg[2], priv->reg[3], priv->reg[4], priv->reg[5], priv->reg[6]); + get_1284_register(pp, 0, ®, GFP_KERNEL); + dbg("reg: %02x %02x %02x %02x %02x %02x %02x", + priv->reg[0], priv->reg[1], priv->reg[2], priv->reg[3], priv->reg[4], priv->reg[5], priv->reg[6]); endpoint = &interface->endpoint[2]; - printk(KERN_DEBUG "uss720: epaddr %d interval %d\n", endpoint->desc.bEndpointAddress, endpoint->desc.bInterval); -#if 0 - priv->irqpipe = usb_rcvctrlpipe(usbdev, endpoint->bEndpointAddress); - i = usb_request_irq(usbdev, priv->irqpipe, - uss720_irq, endpoint->bInterval, - pp, &priv->irqhandle); - if (i) { - printk (KERN_WARNING "usb-uss720: usb_request_irq failed (0x%x)\n", i); - goto probe_abort_port; - } -#endif + dbg("epaddr %d interval %d", endpoint->desc.bEndpointAddress, endpoint->desc.bInterval); parport_announce_port(pp); - usb_set_intfdata (intf, pp); + usb_set_intfdata(intf, pp); return 0; -#if 0 -probe_abort_port: - parport_put_port(pp); -#endif probe_abort: - kfree(priv); + kill_all_async_requests_priv(priv); + kref_put(&priv->ref_count, destroy_priv); return -ENODEV; } static void uss720_disconnect(struct usb_interface *intf) { - struct parport *pp = usb_get_intfdata (intf); + struct parport *pp = usb_get_intfdata(intf); struct parport_uss720_private *priv; + struct usb_device *usbdev; - usb_set_intfdata (intf, NULL); + dbg("disconnect"); + usb_set_intfdata(intf, NULL); if (pp) { priv = pp->private_data; - parport_remove_port(pp); -#if 0 - usb_release_irq(usbdev, priv->irqhandle, priv->irqpipe); -#endif + usbdev = priv->usbdev; priv->usbdev = NULL; + priv->pp = NULL; + dbg("parport_remove_port"); + parport_remove_port(pp); parport_put_port(pp); - kfree(priv); + kill_all_async_requests_priv(priv); + kref_put(&priv->ref_count, destroy_priv); } + dbg("disconnect done"); } /* table of cables that work through this driver */ @@ -647,8 +791,8 @@ static struct usb_driver uss720_driver = { /* --------------------------------------------------------------------- */ -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); static int __init uss720_init(void) @@ -659,6 +803,9 @@ static int __init uss720_init(void) goto out; info(DRIVER_VERSION ":" DRIVER_DESC); + info("NOTE: this is a special purpose driver to allow nonstandard"); + info("protocols (eg. bitbang) over USS720 usb to parallel cables"); + info("If you just want to connect to a printer, use usblp instead"); out: return retval; } diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index 417464dea9f..17d0190ef64 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -79,7 +79,7 @@ static inline char mon_text_get_setup(struct mon_event_text *ep, return '-'; if (urb->transfer_flags & URB_NO_SETUP_DMA_MAP) - return 'D'; + return mon_dmapeek(ep->setup, urb->setup_dma, SETUP_MAX); if (urb->setup_packet == NULL) return 'Z'; /* '0' would be not as pretty. */ diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 4ace9964fc6..97c78c21e8d 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -32,7 +32,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.04" +#define DRIVER_VERSION "v0.05" #define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver" /* @@ -54,8 +54,11 @@ static void cp2101_shutdown(struct usb_serial*); static int debug; static struct usb_device_id id_table [] = { + { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ + { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ + { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ { } /* Terminating Entry */ }; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index 05c44ae3ed3..9ee1aaff2fc 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -610,8 +610,7 @@ static void cypress_close(struct usb_serial_port *port, struct file * filp) timeout = max((HZ*2560)/bps,HZ/10); else timeout = 2*HZ; - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(timeout); + schedule_timeout_interruptible(timeout); dbg("%s - stopping urbs", __FUNCTION__); usb_kill_urb (port->interrupt_in_urb); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 0a6e8b474b1..4e434cb10bb 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -914,7 +914,7 @@ static void ftdi_determine_type(struct usb_serial_port *port) unsigned interfaces; /* Assume it is not the original SIO device for now. */ - priv->baud_base = 48000000 / 16; + priv->baud_base = 48000000 / 2; priv->write_offset = 0; version = le16_to_cpu(udev->descriptor.bcdDevice); diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 461474176cf..3cf245bdda5 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -95,6 +95,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_ID) }, { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65) }, { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) }, + { USB_DEVICE( NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID ) }, { } /* Terminating entry */ }; @@ -652,8 +653,7 @@ static void pl2303_close (struct usb_serial_port *port, struct file *filp) timeout = max((HZ*2560)/bps,HZ/10); else timeout = 2*HZ; - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(timeout); + schedule_timeout_interruptible(timeout); /* shutdown our urbs */ dbg("%s - shutting down urbs", __FUNCTION__); diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index b734c4003c5..7be9644f5a0 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -58,3 +58,7 @@ #define SYNTECH_VENDOR_ID 0x0745 #define SYNTECH_PRODUCT_ID 0x0001 + +/* Nokia CA-42 Cable */ +#define NOKIA_CA42_VENDOR_ID 0x078b +#define NOKIA_CA42_PRODUCT_ID 0x1234 diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index d34dc9f417f..4837524eada 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -227,42 +227,42 @@ static int queuecommand(struct scsi_cmnd *srb, ***********************************************************************/ /* Command timeout and abort */ -/* This is always called with scsi_lock(host) held */ static int command_abort(struct scsi_cmnd *srb) { struct us_data *us = host_to_us(srb->device->host); US_DEBUGP("%s called\n", __FUNCTION__); + /* us->srb together with the TIMED_OUT, RESETTING, and ABORTING + * bits are protected by the host lock. */ + scsi_lock(us_to_host(us)); + /* Is this command still active? */ if (us->srb != srb) { + scsi_unlock(us_to_host(us)); US_DEBUGP ("-- nothing to abort\n"); return FAILED; } /* Set the TIMED_OUT bit. Also set the ABORTING bit, but only if * a device reset isn't already in progress (to avoid interfering - * with the reset). To prevent races with auto-reset, we must - * stop any ongoing USB transfers while still holding the host - * lock. */ + * with the reset). Note that we must retain the host lock while + * calling usb_stor_stop_transport(); otherwise it might interfere + * with an auto-reset that begins as soon as we release the lock. */ set_bit(US_FLIDX_TIMED_OUT, &us->flags); if (!test_bit(US_FLIDX_RESETTING, &us->flags)) { set_bit(US_FLIDX_ABORTING, &us->flags); usb_stor_stop_transport(us); } + scsi_unlock(us_to_host(us)); /* Wait for the aborted command to finish */ wait_for_completion(&us->notify); - - /* Reacquire the lock and allow USB transfers to resume */ - clear_bit(US_FLIDX_ABORTING, &us->flags); - clear_bit(US_FLIDX_TIMED_OUT, &us->flags); return SUCCESS; } /* This invokes the transport reset mechanism to reset the state of the * device */ -/* This is always called with scsi_lock(host) held */ static int device_reset(struct scsi_cmnd *srb) { struct us_data *us = host_to_us(srb->device->host); @@ -279,7 +279,6 @@ static int device_reset(struct scsi_cmnd *srb) } /* Simulate a SCSI bus reset by resetting the device's USB port. */ -/* This is always called with scsi_lock(host) held */ static int bus_reset(struct scsi_cmnd *srb) { struct us_data *us = host_to_us(srb->device->host); @@ -291,7 +290,6 @@ static int bus_reset(struct scsi_cmnd *srb) result = usb_stor_port_reset(us); up(&(us->dev_semaphore)); - /* lock the host for the return */ return result < 0 ? FAILED : SUCCESS; } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ad0cfd7a782..b79dad1b598 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -86,6 +86,16 @@ UNUSUAL_DEV( 0x040d, 0x6205, 0x0003, 0x0003, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net> + * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product) + * for USB floppies that need the SINGLE_LUN enforcement. + */ +UNUSUAL_DEV( 0x0409, 0x0040, 0x0000, 0x9999, + "NEC", + "NEC USB UF000x", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + /* Deduced by Jonathan Woithe <jwoithe@physics.adelaide.edu.au> * Entry needed for flags: US_FL_FIX_INQUIRY because initial inquiry message * always fails and confuses drive. @@ -96,6 +106,13 @@ UNUSUAL_DEV( 0x0411, 0x001c, 0x0113, 0x0113, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), +/* Reported by Olaf Hering <olh@suse.de> from novell bug #105878 */ +UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, + "SMSC", + "FDC GOLD-2.30", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_SINGLE_LUN ), + #ifdef CONFIG_USB_STORAGE_DPCM UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, "Microtech", @@ -103,6 +120,24 @@ UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ), #endif +/* + * Pete Zaitcev <zaitcev@yahoo.com>, from Patrick C. F. Ernzer, bz#162559. + * The key does not actually break, but it returns zero sense which + * makes our SCSI stack to print confusing messages. + */ +UNUSUAL_DEV( 0x0457, 0x0150, 0x0100, 0x0100, + "USBest Technology", /* sold by Transcend */ + "USB Mass Storage Device", + US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), + +/* Patch submitted by Daniel Drake <dsd@gentoo.org> + * Device reports nonsense bInterfaceProtocol 6 when connected over USB2 */ +UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100, + "Neuros Audio", + "USB 2.0 HD 2.5", + US_SC_DEVICE, US_PR_BULK, NULL, + US_FL_NEED_OVERRIDE ), + /* Patch submitted by Philipp Friedrich <philipp@void.at> */ UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100, "Kyocera", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index cb4c770baf3..f9a9bfa1aef 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -392,11 +392,16 @@ SkipForAbort: /* If an abort request was received we need to signal that * the abort has finished. The proper test for this is * the TIMED_OUT flag, not srb->result == DID_ABORT, because - * a timeout/abort request might be received after all the - * USB processing was complete. */ - if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) + * the timeout might have occurred after the command had + * already completed with a different result code. */ + if (test_bit(US_FLIDX_TIMED_OUT, &us->flags)) { complete(&(us->notify)); + /* Allow USB transfers to resume */ + clear_bit(US_FLIDX_ABORTING, &us->flags); + clear_bit(US_FLIDX_TIMED_OUT, &us->flags); + } + /* finished working on this command */ us->srb = NULL; scsi_unlock(host); diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index 5fe182d6e4a..eb83a7874c7 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -137,7 +137,7 @@ config FONT_8x8 config FONT_8x16 bool "VGA 8x16 font" if FONTS - depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y + depends on FRAMEBUFFER_CONSOLE || SGI_NEWPORT_CONSOLE=y || USB_SISUSBVGA_CON default y if !SPARC32 && !SPARC64 && !FONTS help This is the "high resolution" font for the VGA frame buffer (the one diff --git a/drivers/video/console/Makefile b/drivers/video/console/Makefile index b562f6bb9d3..42c7b8dcd22 100644 --- a/drivers/video/console/Makefile +++ b/drivers/video/console/Makefile @@ -33,6 +33,10 @@ endif obj-$(CONFIG_FB_STI) += sticore.o font.o +ifeq ($(CONFIG_USB_SISUSBVGA_CON),y) +obj-$(CONFIG_USB_SISUSBVGA) += font.o +endif + # Targets that kbuild needs to know about targets := promcon_tbl.c diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c index 7018ffffcbc..0dbc9ddb676 100644 --- a/drivers/video/i810/i810_main.c +++ b/drivers/video/i810/i810_main.c @@ -95,18 +95,18 @@ static struct pci_driver i810fb_driver = { static char *mode_option __devinitdata = NULL; static int vram __devinitdata = 4; static int bpp __devinitdata = 8; -static int mtrr __devinitdata = 0; -static int accel __devinitdata = 0; -static int hsync1 __devinitdata = 0; -static int hsync2 __devinitdata = 0; -static int vsync1 __devinitdata = 0; -static int vsync2 __devinitdata = 0; -static int xres __devinitdata = 640; -static int yres __devinitdata = 480; -static int vyres __devinitdata = 0; -static int sync __devinitdata = 0; -static int ext_vga __devinitdata = 0; -static int dcolor __devinitdata = 0; +static int mtrr __devinitdata; +static int accel __devinitdata; +static int hsync1 __devinitdata; +static int hsync2 __devinitdata; +static int vsync1 __devinitdata; +static int vsync2 __devinitdata; +static int xres __devinitdata; +static int yres __devinitdata; +static int vyres __devinitdata; +static int sync __devinitdata; +static int extvga __devinitdata; +static int dcolor __devinitdata; /*------------------------------------------------------------*/ @@ -950,7 +950,7 @@ static int i810_check_params(struct fb_var_screeninfo *var, struct fb_info *info) { struct i810fb_par *par = (struct i810fb_par *) info->par; - int line_length, vidmem, mode_valid = 0; + int line_length, vidmem, mode_valid = 0, retval = 0; u32 vyres = var->yres_virtual, vxres = var->xres_virtual; /* * Memory limit @@ -1026,10 +1026,11 @@ static int i810_check_params(struct fb_var_screeninfo *var, printk("i810fb: invalid video mode%s\n", default_sync ? "" : ". Specifying " "vsyncN/hsyncN parameters may help"); + retval = -EINVAL; } } - return 0; + return retval; } /** @@ -1724,12 +1725,21 @@ static void __devinit i810_init_defaults(struct i810fb_par *par, if (bpp < 8) bpp = 8; + par->i810fb_ops = i810fb_ops; + + if (xres) + info->var.xres = xres; + else + info->var.xres = 640; + + if (yres) + info->var.yres = yres; + else + info->var.yres = 480; + if (!vyres) - vyres = (vram << 20)/(xres*bpp >> 3); + vyres = (vram << 20)/(info->var.xres*bpp >> 3); - par->i810fb_ops = i810fb_ops; - info->var.xres = xres; - info->var.yres = yres; info->var.yres_virtual = vyres; info->var.bits_per_pixel = bpp; @@ -1756,7 +1766,7 @@ static void __devinit i810_init_device(struct i810fb_par *par) i810_init_cursor(par); /* mvo: enable external vga-connector (for laptops) */ - if (ext_vga) { + if (extvga) { i810_writel(HVSYNC, mmio, 0); i810_writel(PWR_CLKC, mmio, 3); } @@ -1830,7 +1840,7 @@ static void __devinit i810fb_find_init_mode(struct fb_info *info) { struct fb_videomode mode; struct fb_var_screeninfo var; - struct fb_monspecs *specs = NULL; + struct fb_monspecs *specs = &info->monspecs; int found = 0; #ifdef CONFIG_FB_I810_I2C int i; @@ -1853,16 +1863,24 @@ static void __devinit i810fb_find_init_mode(struct fb_info *info) if (!err) printk("i810fb_init_pci: DDC probe successful\n"); - fb_edid_to_monspecs(par->edid, &info->monspecs); + fb_edid_to_monspecs(par->edid, specs); - if (info->monspecs.modedb == NULL) + if (specs->modedb == NULL) printk("i810fb_init_pci: Unable to get Mode Database\n"); - specs = &info->monspecs; fb_videomode_to_modelist(specs->modedb, specs->modedb_len, &info->modelist); if (specs->modedb != NULL) { - if (specs->misc & FB_MISC_1ST_DETAIL) { + if (xres && yres) { + struct fb_videomode *m; + + if ((m = fb_find_best_mode(&var, &info->modelist))) { + mode = *m; + found = 1; + } + } + + if (!found && specs->misc & FB_MISC_1ST_DETAIL) { for (i = 0; i < specs->modedb_len; i++) { if (specs->modedb[i].flag & FB_MODE_IS_FIRST) { mode = specs->modedb[i]; @@ -1903,8 +1921,8 @@ static int __devinit i810fb_setup(char *options) mtrr = 1; else if (!strncmp(this_opt, "accel", 5)) accel = 1; - else if (!strncmp(this_opt, "ext_vga", 7)) - ext_vga = 1; + else if (!strncmp(this_opt, "extvga", 6)) + extvga = 1; else if (!strncmp(this_opt, "sync", 4)) sync = 1; else if (!strncmp(this_opt, "vram:", 5)) @@ -2133,8 +2151,8 @@ module_param(accel, bool, 0); MODULE_PARM_DESC(accel, "Use Acceleration (BLIT) engine (default = 0)"); module_param(mtrr, bool, 0); MODULE_PARM_DESC(mtrr, "Use MTRR (default = 0)"); -module_param(ext_vga, bool, 0); -MODULE_PARM_DESC(ext_vga, "Enable external VGA connector (default = 0)"); +module_param(extvga, bool, 0); +MODULE_PARM_DESC(extvga, "Enable external VGA connector (default = 0)"); module_param(sync, bool, 0); MODULE_PARM_DESC(sync, "wait for accel engine to finish drawing" " (default = 0)"); diff --git a/drivers/w1/w1_ds2433.c b/drivers/w1/w1_ds2433.c index b7c24b34d27..279e0e0363d 100644 --- a/drivers/w1/w1_ds2433.c +++ b/drivers/w1/w1_ds2433.c @@ -15,6 +15,10 @@ #include <linux/delay.h> #ifdef CONFIG_W1_F23_CRC #include <linux/crc16.h> + +#define CRC16_INIT 0 +#define CRC16_VALID 0xb001 + #endif #include "w1.h" @@ -214,7 +218,7 @@ static ssize_t w1_f23_write_bin(struct kobject *kobj, char *buf, loff_t off, #ifdef CONFIG_W1_F23_CRC /* can only write full blocks in cached mode */ if ((off & W1_PAGE_MASK) || (count & W1_PAGE_MASK)) { - dev_err(&sl->dev, "invalid offset/count off=%d cnt=%d\n", + dev_err(&sl->dev, "invalid offset/count off=%d cnt=%zd\n", (int)off, count); return -EINVAL; } |