diff options
Diffstat (limited to 'drivers')
114 files changed, 40555 insertions, 496 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index a2b902f4d43..a21156209c9 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -111,4 +111,6 @@ source "drivers/xen/Kconfig" source "drivers/staging/Kconfig" source "drivers/platform/Kconfig" + +source "drivers/ar6000/Kconfig" endmenu diff --git a/drivers/Makefile b/drivers/Makefile index f42a03029b7..8794a273787 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -94,6 +94,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle/ obj-y += idle/ obj-$(CONFIG_MMC) += mmc/ obj-$(CONFIG_MEMSTICK) += memstick/ +obj-$(CONFIG_AR6000_WLAN) += ar6000/ obj-$(CONFIG_NEW_LEDS) += leds/ obj-$(CONFIG_INFINIBAND) += infiniband/ obj-$(CONFIG_SGI_SN) += sn/ diff --git a/drivers/ar6000/Kconfig b/drivers/ar6000/Kconfig new file mode 100644 index 00000000000..29b28b8c02b --- /dev/null +++ b/drivers/ar6000/Kconfig @@ -0,0 +1,32 @@ +config AR6000_WLAN + tristate "AR6000 wireless networking over SDIO" + depends on MMC + select WIRELESS_EXT + select WEXT_PRIV + default m + help + good luck. + +config AR6000_WLAN_DEBUG + bool "Enable retrieval of firmware debugging information" + depends on AR6000_WLAN + default n + help + The AR6k firmware maintains a log of debugging events that + gets flushed to the host on various occasions. Retrieval of + this data is very slow, taking several seconds. + + If in doubt, say N. + +config AR6000_WLAN_RESET + bool "Soft-reset when shutting down" + depends on AR6000_WLAN + default n + help + The AR6k module can be explicitly reset when shutting down + the device. This adds a delay of about two seconds to suspend, + module removal, and so on. Since the WLAN SDIO function is + generally disabled soon thereafter anyway, this reset seems + superfluous. + + If in doubt, say N. diff --git a/drivers/ar6000/Makefile b/drivers/ar6000/Makefile new file mode 100644 index 00000000000..f8f443172ec --- /dev/null +++ b/drivers/ar6000/Makefile @@ -0,0 +1,38 @@ +REV ?= 2 + +PWD := $(shell pwd) + +EXTRA_CFLAGS += -I$(src)/include + +EXTRA_CFLAGS += -DLINUX -D__KERNEL__ -DHTC_RAW_INTERFACE\ + -DTCMD -DUSER_KEYS \ + -DNO_SYNC_FLUSH #\ + -DMULTIPLE_FRAMES_PER_INTERRUPT -DAR6000REV$(REV) \ + -DBLOCK_TX_PATH_FLAG \ + -DSDIO \ + +EXTRA_CFLAGS += -DKERNEL_2_6 + +obj-$(CONFIG_AR6000_WLAN) += ar6000.o + +ar6000-objs += htc/ar6k.o \ + htc/ar6k_events.o \ + htc/htc_send.o \ + htc/htc_recv.o \ + htc/htc_services.o \ + htc/htc.o \ + hif/hif2.o \ + bmi/bmi.o \ + ar6000/ar6000_drv.o \ + ar6000/ar6000_raw_if.o \ + ar6000/netbuf.o \ + ar6000/wireless_ext.o \ + ar6000/ioctl.o \ + miscdrv/common_drv.o \ + miscdrv/credit_dist.o \ + wmi/wmi.o \ + wlan/wlan_node.o \ + wlan/wlan_recv_beacon.o \ + wlan/wlan_utils.o + + diff --git a/drivers/ar6000/ar6000/ar6000_drv.c b/drivers/ar6000/ar6000/ar6000_drv.c new file mode 100644 index 00000000000..90533ab9610 --- /dev/null +++ b/drivers/ar6000/ar6000/ar6000_drv.c @@ -0,0 +1,3129 @@ +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +/* + * This driver is a pseudo ethernet driver to access the Atheros AR6000 + * WLAN Device + */ +static const char athId[] __attribute__ ((unused)) = "$Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/ar6000_drv.c#2 $"; + +#include "ar6000_drv.h" +#include "htc.h" + +MODULE_LICENSE("GPL and additional rights"); + +#ifndef REORG_APTC_HEURISTICS +#undef ADAPTIVE_POWER_THROUGHPUT_CONTROL +#endif /* REORG_APTC_HEURISTICS */ + +#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL +#define APTC_TRAFFIC_SAMPLING_INTERVAL 100 /* msec */ +#define APTC_UPPER_THROUGHPUT_THRESHOLD 3000 /* Kbps */ +#define APTC_LOWER_THROUGHPUT_THRESHOLD 2000 /* Kbps */ + +typedef struct aptc_traffic_record { + A_BOOL timerScheduled; + struct timeval samplingTS; + unsigned long bytesReceived; + unsigned long bytesTransmitted; +} APTC_TRAFFIC_RECORD; + +A_TIMER aptcTimer; +APTC_TRAFFIC_RECORD aptcTR; +#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ + +unsigned int bypasswmi = 0; +unsigned int debuglevel = 0; +int tspecCompliance = 1; +unsigned int busspeedlow = 0; +unsigned int onebitmode = 0; +unsigned int skipflash = 0; +unsigned int wmitimeout = 2; +unsigned int wlanNodeCaching = 1; +unsigned int enableuartprint = 0; +unsigned int logWmiRawMsgs = 0; +unsigned int enabletimerwar = 0; +unsigned int mbox_yield_limit = 99; +int reduce_credit_dribble = 1 + HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF; +int allow_trace_signal = 0; +#ifdef CONFIG_HOST_TCMD_SUPPORT +unsigned int testmode =0; +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) +module_param(bypasswmi, int, 0644); +module_param(debuglevel, int, 0644); +module_param(tspecCompliance, int, 0644); +module_param(onebitmode, int, 0644); +module_param(busspeedlow, int, 0644); +module_param(skipflash, int, 0644); +module_param(wmitimeout, int, 0644); +module_param(wlanNodeCaching, int, 0644); +module_param(logWmiRawMsgs, int, 0644); +module_param(enableuartprint, int, 0644); +module_param(enabletimerwar, int, 0644); +module_param(mbox_yield_limit, int, 0644); +module_param(reduce_credit_dribble, int, 0644); +module_param(allow_trace_signal, int, 0644); +#ifdef CONFIG_HOST_TCMD_SUPPORT +module_param(testmode, int, 0644); +#endif +#else + +#define __user +/* for linux 2.4 and lower */ +MODULE_PARM(bypasswmi,"i"); +MODULE_PARM(debuglevel, "i"); +MODULE_PARM(onebitmode,"i"); +MODULE_PARM(busspeedlow, "i"); +MODULE_PARM(skipflash, "i"); +MODULE_PARM(wmitimeout, "i"); +MODULE_PARM(wlanNodeCaching, "i"); +MODULE_PARM(enableuartprint,"i"); +MODULE_PARM(logWmiRawMsgs, "i"); +MODULE_PARM(enabletimerwar,"i"); +MODULE_PARM(mbox_yield_limit,"i"); +MODULE_PARM(reduce_credit_dribble,"i"); +MODULE_PARM(allow_trace_signal,"i"); +#ifdef CONFIG_HOST_TCMD_SUPPORT +MODULE_PARM(testmode, "i"); +#endif +#endif + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10) +/* in 2.6.10 and later this is now a pointer to a uint */ +unsigned int _mboxnum = HTC_MAILBOX_NUM_MAX; +#define mboxnum &_mboxnum +#else +unsigned int mboxnum = HTC_MAILBOX_NUM_MAX; +#endif + +#ifdef CONFIG_AR6000_WLAN_RESET +unsigned int resetok = 1; +#else +unsigned int resetok = 0; +#endif + +#ifdef DEBUG +A_UINT32 g_dbg_flags = DBG_DEFAULTS; +unsigned int debugflags = 0; +int debugdriver = 1; +unsigned int debughtc = 128; +unsigned int debugbmi = 1; +unsigned int debughif = 2; +unsigned int txcreditsavailable[HTC_MAILBOX_NUM_MAX] = {0}; +unsigned int txcreditsconsumed[HTC_MAILBOX_NUM_MAX] = {0}; +unsigned int txcreditintrenable[HTC_MAILBOX_NUM_MAX] = {0}; +unsigned int txcreditintrenableaggregate[HTC_MAILBOX_NUM_MAX] = {0}; + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) +module_param(debugflags, int, 0644); +module_param(debugdriver, int, 0644); +module_param(debughtc, int, 0644); +module_param(debugbmi, int, 0644); +module_param(debughif, int, 0644); +module_param(resetok, int, 0644); +module_param_array(txcreditsavailable, int, mboxnum, 0644); +module_param_array(txcreditsconsumed, int, mboxnum, 0644); +module_param_array(txcreditintrenable, int, mboxnum, 0644); +module_param_array(txcreditintrenableaggregate, int, mboxnum, 0644); +#else +/* linux 2.4 and lower */ +MODULE_PARM(debugflags,"i"); +MODULE_PARM(debugdriver, "i"); +MODULE_PARM(debughtc, "i"); +MODULE_PARM(debugbmi, "i"); +MODULE_PARM(debughif, "i"); +MODULE_PARM(resetok, "i"); +MODULE_PARM(txcreditsavailable, "0-3i"); +MODULE_PARM(txcreditsconsumed, "0-3i"); +MODULE_PARM(txcreditintrenable, "0-3i"); +MODULE_PARM(txcreditintrenableaggregate, "0-3i"); +#endif + +#endif /* DEBUG */ + +unsigned int tx_attempt[HTC_MAILBOX_NUM_MAX] = {0}; +unsigned int tx_post[HTC_MAILBOX_NUM_MAX] = {0}; +unsigned int tx_complete[HTC_MAILBOX_NUM_MAX] = {0}; +unsigned int hifBusRequestNumMax = 40; +unsigned int war23838_disabled = 0; +#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL +unsigned int enableAPTCHeuristics = 1; +#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) +module_param_array(tx_attempt, int, mboxnum, 0644); +module_param_array(tx_post, int, mboxnum, 0644); +module_param_array(tx_complete, int, mboxnum, 0644); +module_param(hifBusRequestNumMax, int, 0644); +module_param(war23838_disabled, int, 0644); +#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL +module_param(enableAPTCHeuristics, int, 0644); +#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ +#else +MODULE_PARM(tx_attempt, "0-3i"); +MODULE_PARM(tx_post, "0-3i"); +MODULE_PARM(tx_complete, "0-3i"); +MODULE_PARM(hifBusRequestNumMax, "i"); +MODULE_PARM(war23838_disabled, "i"); +#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL +MODULE_PARM(enableAPTCHeuristics, "i"); +#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ +#endif + +#ifdef BLOCK_TX_PATH_FLAG +int blocktx = 0; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) +module_param(blocktx, int, 0644); +#else +MODULE_PARM(blocktx, "i"); +#endif +#endif /* BLOCK_TX_PATH_FLAG */ + +// TODO move to arsoft_c +USER_RSSI_THOLD rssi_map[12]; + +int reconnect_flag = 0; + +DECLARE_WAIT_QUEUE_HEAD(ar6000_scan_queue); + +/* Function declarations */ +static int ar6000_init_module(void); +static void ar6000_cleanup_module(void); + +int ar6000_init(struct net_device *dev); +static int ar6000_open(struct net_device *dev); +static int ar6000_close(struct net_device *dev); +static int ar6000_cleanup(struct net_device *dev); +static void ar6000_init_control_info(AR_SOFTC_T *ar); +static int ar6000_data_tx(struct sk_buff *skb, struct net_device *dev); + +static void ar6000_destroy(struct net_device *dev, unsigned int unregister); +static void ar6000_detect_error(unsigned long ptr); +static struct net_device_stats *ar6000_get_stats(struct net_device *dev); +static struct iw_statistics *ar6000_get_iwstats(struct net_device * dev); + +/* + * HTC service connection handlers + */ +static void ar6000_avail_ev(HTC_HANDLE HTCHandle); + +static void ar6000_unavail_ev(void *Instance); + +static void ar6000_target_failure(void *Instance, A_STATUS Status); + +static void ar6000_rx(void *Context, HTC_PACKET *pPacket); + +static void ar6000_rx_refill(void *Context,HTC_ENDPOINT_ID Endpoint); + +static void ar6000_tx_complete(void *Context, HTC_PACKET *pPacket); + +static void ar6000_tx_queue_full(void *Context, HTC_ENDPOINT_ID Endpoint); + +static void ar6000_tx_queue_avail(void *Context, HTC_ENDPOINT_ID Endpoint); + +/* + * Static variables + */ + +static struct net_device *ar6000_devices[MAX_AR6000]; +extern struct iw_handler_def ath_iw_handler_def; +DECLARE_WAIT_QUEUE_HEAD(arEvent); +static void ar6000_cookie_init(AR_SOFTC_T *ar); +static void ar6000_cookie_cleanup(AR_SOFTC_T *ar); +static void ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie); +static struct ar_cookie *ar6000_alloc_cookie(AR_SOFTC_T *ar); +static void ar6000_TxDataCleanup(AR_SOFTC_T *ar); + +#ifdef USER_KEYS +static A_STATUS ar6000_reinstall_keys(AR_SOFTC_T *ar,A_UINT8 key_op_ctrl); +#endif + + +static struct ar_cookie s_ar_cookie_mem[MAX_COOKIE_NUM]; + +#define HOST_INTEREST_ITEM_ADDRESS(ar, item) \ +((ar->arTargetType == TARGET_TYPE_AR6001) ? \ + AR6001_HOST_INTEREST_ITEM_ADDRESS(item) : \ + AR6002_HOST_INTEREST_ITEM_ADDRESS(item)) + + +/* Debug log support */ + +/* + * Flag to govern whether the debug logs should be parsed in the kernel + * or reported to the application. + */ +#ifdef DEBUG +#define REPORT_DEBUG_LOGS_TO_APP +#endif + +A_STATUS +ar6000_set_host_app_area(AR_SOFTC_T *ar) +{ + A_UINT32 address, data; + struct host_app_area_s host_app_area; + + /* Fetch the address of the host_app_area_s instance in the host interest area */ + address = HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest); + if (ar6000_ReadRegDiag(ar->arHifDevice, &address, &data) != A_OK) { + return A_ERROR; + } + address = data; + host_app_area.wmi_protocol_ver = WMI_PROTOCOL_VERSION; + if (ar6000_WriteDataDiag(ar->arHifDevice, address, + (A_UCHAR *)&host_app_area, + sizeof(struct host_app_area_s)) != A_OK) + { + return A_ERROR; + } + + return A_OK; +} + +A_UINT32 +dbglog_get_debug_hdr_ptr(AR_SOFTC_T *ar) +{ + A_UINT32 param; + A_UINT32 address; + A_STATUS status; + + address = HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbglog_hdr); + if ((status = ar6000_ReadDataDiag(ar->arHifDevice, address, + (A_UCHAR *)¶m, 4)) != A_OK) + { + param = 0; + } + + return param; +} + +/* + * The dbglog module has been initialized. Its ok to access the relevant + * data stuctures over the diagnostic window. + */ +void +ar6000_dbglog_init_done(AR_SOFTC_T *ar) +{ + ar->dbglog_init_done = TRUE; +} + +A_UINT32 +dbglog_get_debug_fragment(A_INT8 *datap, A_UINT32 len, A_UINT32 limit) +{ + A_INT32 *buffer; + A_UINT32 count; + A_UINT32 numargs; + A_UINT32 length; + A_UINT32 fraglen; + + count = fraglen = 0; + buffer = (A_INT32 *)datap; + length = (limit >> 2); + + if (len <= limit) { + fraglen = len; + } else { + while (count < length) { + numargs = DBGLOG_GET_NUMARGS(buffer[count]); + fraglen = (count << 2); + count += numargs + 1; + } + } + + return fraglen; +} + +void +dbglog_parse_debug_logs(A_INT8 *datap, A_UINT32 len) +{ + A_INT32 *buffer; + A_UINT32 count; + A_UINT32 timestamp; + A_UINT32 debugid; + A_UINT32 moduleid; + A_UINT32 numargs; + A_UINT32 length; + + count = 0; + buffer = (A_INT32 *)datap; + length = (len >> 2); + while (count < length) { + debugid = DBGLOG_GET_DBGID(buffer[count]); + moduleid = DBGLOG_GET_MODULEID(buffer[count]); + numargs = DBGLOG_GET_NUMARGS(buffer[count]); + timestamp = DBGLOG_GET_TIMESTAMP(buffer[count]); + switch (numargs) { + case 0: + AR_DEBUG_PRINTF("%d %d (%d)\n", moduleid, debugid, timestamp); + break; + + case 1: + AR_DEBUG_PRINTF("%d %d (%d): 0x%x\n", moduleid, debugid, + timestamp, buffer[count+1]); + break; + + case 2: + AR_DEBUG_PRINTF("%d %d (%d): 0x%x, 0x%x\n", moduleid, debugid, + timestamp, buffer[count+1], buffer[count+2]); + break; + + default: + AR_DEBUG_PRINTF("Invalid args: %d\n", numargs); + } + count += numargs + 1; + } +} + +int +ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar) +{ + struct dbglog_hdr_s debug_hdr; + struct dbglog_buf_s debug_buf; + A_UINT32 address; + A_UINT32 length; + A_UINT32 dropped; + A_UINT32 firstbuf; + A_UINT32 debug_hdr_ptr; + + if (!ar->dbglog_init_done) return A_ERROR; + +#ifndef CONFIG_AR6000_WLAN_DEBUG + return 0; +#endif + + AR6000_SPIN_LOCK(&ar->arLock, 0); + + if (ar->dbgLogFetchInProgress) { + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + return A_EBUSY; + } + + /* block out others */ + ar->dbgLogFetchInProgress = TRUE; + + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + + debug_hdr_ptr = dbglog_get_debug_hdr_ptr(ar); + printk("debug_hdr_ptr: 0x%x\n", debug_hdr_ptr); + + /* Get the contents of the ring buffer */ + if (debug_hdr_ptr) { + address = debug_hdr_ptr; + length = sizeof(struct dbglog_hdr_s); + ar6000_ReadDataDiag(ar->arHifDevice, address, + (A_UCHAR *)&debug_hdr, length); + address = (A_UINT32)debug_hdr.dbuf; + firstbuf = address; + dropped = debug_hdr.dropped; + length = sizeof(struct dbglog_buf_s); + ar6000_ReadDataDiag(ar->arHifDevice, address, + (A_UCHAR *)&debug_buf, length); + + do { + address = (A_UINT32)debug_buf.buffer; + length = debug_buf.length; + if ((length) && (debug_buf.length <= debug_buf.bufsize)) { + /* Rewind the index if it is about to overrun the buffer */ + if (ar->log_cnt > (DBGLOG_HOST_LOG_BUFFER_SIZE - length)) { + ar->log_cnt = 0; + } + if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address, + (A_UCHAR *)&ar->log_buffer[ar->log_cnt], length)) + { + break; + } + ar6000_dbglog_event(ar, dropped, &ar->log_buffer[ar->log_cnt], length); + ar->log_cnt += length; + } else { + AR_DEBUG_PRINTF("Length: %d (Total size: %d)\n", + debug_buf.length, debug_buf.bufsize); + } + + address = (A_UINT32)debug_buf.next; + length = sizeof(struct dbglog_buf_s); + if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address, + (A_UCHAR *)&debug_buf, length)) + { + break; + } + + } while (address != firstbuf); + } + + ar->dbgLogFetchInProgress = FALSE; + + return A_OK; +} + +void +ar6000_dbglog_event(AR_SOFTC_T *ar, A_UINT32 dropped, + A_INT8 *buffer, A_UINT32 length) +{ +#ifdef REPORT_DEBUG_LOGS_TO_APP + #define MAX_WIRELESS_EVENT_SIZE 252 + /* + * Break it up into chunks of MAX_WIRELESS_EVENT_SIZE bytes of messages. + * There seems to be a limitation on the length of message that could be + * transmitted to the user app via this mechanism. + */ + A_UINT32 send, sent; + + sent = 0; + send = dbglog_get_debug_fragment(&buffer[sent], length - sent, + MAX_WIRELESS_EVENT_SIZE); + while (send) { + ar6000_send_event_to_app(ar, WMIX_DBGLOG_EVENTID, &buffer[sent], send); + sent += send; + send = dbglog_get_debug_fragment(&buffer[sent], length - sent, + MAX_WIRELESS_EVENT_SIZE); + } +#else + AR_DEBUG_PRINTF("Dropped logs: 0x%x\nDebug info length: %d\n", + dropped, length); + + /* Interpret the debug logs */ + dbglog_parse_debug_logs(buffer, length); +#endif /* REPORT_DEBUG_LOGS_TO_APP */ +} + + + +static int __init +ar6000_init_module(void) +{ + static int probed = 0; + A_STATUS status; + HTC_INIT_INFO initInfo; + + A_MEMZERO(&initInfo,sizeof(initInfo)); + initInfo.AddInstance = ar6000_avail_ev; + initInfo.DeleteInstance = ar6000_unavail_ev; + initInfo.TargetFailure = ar6000_target_failure; + + +#ifdef DEBUG + /* Set the debug flags if specified at load time */ + if(debugflags != 0) + { + g_dbg_flags = debugflags; + } +#endif + + if (probed) { + return -ENODEV; + } + probed++; + +#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL + memset(&aptcTR, 0, sizeof(APTC_TRAFFIC_RECORD)); +#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ + +#ifdef CONFIG_HOST_GPIO_SUPPORT + ar6000_gpio_init(); +#endif /* CONFIG_HOST_GPIO_SUPPORT */ + + status = HTCInit(&initInfo); + if(status != A_OK) + return -ENODEV; + + return 0; +} + +static void __exit +ar6000_cleanup_module(void) +{ + int i = 0; + struct net_device *ar6000_netdev; + +#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL + /* Delete the Adaptive Power Control timer */ + if (timer_pending(&aptcTimer)) { + del_timer_sync(&aptcTimer); + } +#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ + + for (i=0; i < MAX_AR6000; i++) { + if (ar6000_devices[i] != NULL) { + ar6000_netdev = ar6000_devices[i]; + ar6000_devices[i] = NULL; + ar6000_destroy(ar6000_netdev, 1); + } + } + + /* shutting down HTC will cause the HIF layer to detach from the + * underlying bus driver which will cause the subsequent deletion of + * all HIF and HTC instances */ + HTCShutDown(); + + AR_DEBUG_PRINTF("ar6000_cleanup: success\n"); +} + +#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL +void +aptcTimerHandler(unsigned long arg) +{ + A_UINT32 numbytes; + A_UINT32 throughput; + AR_SOFTC_T *ar; + A_STATUS status; + + ar = (AR_SOFTC_T *)arg; + A_ASSERT(ar != NULL); + A_ASSERT(!timer_pending(&aptcTimer)); + + AR6000_SPIN_LOCK(&ar->arLock, 0); + + /* Get the number of bytes transferred */ + numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived; + aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0; + + /* Calculate and decide based on throughput thresholds */ + throughput = ((numbytes * 8)/APTC_TRAFFIC_SAMPLING_INTERVAL); /* Kbps */ + if (throughput < APTC_LOWER_THROUGHPUT_THRESHOLD) { + /* Enable Sleep and delete the timer */ + A_ASSERT(ar->arWmiReady == TRUE); + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + status = wmi_powermode_cmd(ar->arWmi, REC_POWER); + AR6000_SPIN_LOCK(&ar->arLock, 0); + A_ASSERT(status == A_OK); + aptcTR.timerScheduled = FALSE; + } else { + A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0); + } + + AR6000_SPIN_UNLOCK(&ar->arLock, 0); +} +#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ + + + +/* set HTC block size, assume BMI is already initialized */ +A_STATUS ar6000_SetHTCBlockSize(AR_SOFTC_T *ar) +{ + A_STATUS status; + A_UINT32 blocksizes[HTC_MAILBOX_NUM_MAX]; + + do { + /* get the block sizes */ + status = HIFConfigureDevice(ar->arHifDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE, + blocksizes, sizeof(blocksizes)); + + if (A_FAILED(status)) { + AR_DEBUG_PRINTF("Failed to get block size info from HIF layer...\n"); + break; + } + /* note: we actually get the block size for mailbox 1, for SDIO the block + * size on mailbox 0 is artificially set to 1 */ + /* must be a power of 2 */ + A_ASSERT((blocksizes[1] & (blocksizes[1] - 1)) == 0); + + /* set the host interest area for the block size */ + status = BMIWriteMemory(ar->arHifDevice, + HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_io_block_sz), + (A_UCHAR *)&blocksizes[1], + 4); + + if (A_FAILED(status)) { + AR_DEBUG_PRINTF("BMIWriteMemory for IO block size failed \n"); + break; + } + + AR_DEBUG_PRINTF("Block Size Set: %d (target address:0x%X)\n", + blocksizes[1], HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_io_block_sz)); + + /* set the host interest area for the mbox ISR yield limit */ + status = BMIWriteMemory(ar->arHifDevice, + HOST_INTEREST_ITEM_ADDRESS(ar, hi_mbox_isr_yield_limit), + (A_UCHAR *)&mbox_yield_limit, + 4); + + if (A_FAILED(status)) { + AR_DEBUG_PRINTF("BMIWriteMemory for yield limit failed \n"); + break; + } + + } while (FALSE); + + return status; +} + +static void free_raw_buffers(AR_SOFTC_T *ar) +{ + int i, j; + + for (i = 0; i != HTC_RAW_STREAM_NUM_MAX; i++) { + for (j = 0; j != RAW_HTC_READ_BUFFERS_NUM; j++) + kfree(ar->raw_htc_read_buffer[i][j]); + for (j = 0; j != RAW_HTC_WRITE_BUFFERS_NUM; j++) + kfree(ar->raw_htc_write_buffer[i][j]); + } +} + +static int alloc_raw_buffers(AR_SOFTC_T *ar) +{ + int i, j; + raw_htc_buffer *b; + + for (i = 0; i != HTC_RAW_STREAM_NUM_MAX; i++) { + for (j = 0; j != RAW_HTC_READ_BUFFERS_NUM; j++) { + b = kzalloc(sizeof(*b), GFP_KERNEL); + if (!b) + return -ENOMEM; + ar->raw_htc_read_buffer[i][j] = b; + } + for (j = 0; j != RAW_HTC_WRITE_BUFFERS_NUM; j++) { + b = kzalloc(sizeof(*b), GFP_KERNEL); + if (!b) + return -ENOMEM; + ar->raw_htc_write_buffer[i][j] = b; + } + } + return 0; +} + +static const struct net_device_ops ar6000_netdev_ops = { + .ndo_init = &ar6000_init, + .ndo_open = &ar6000_open, + .ndo_stop = &ar6000_close, + .ndo_start_xmit = &ar6000_data_tx, + .ndo_get_stats = &ar6000_get_stats, + .ndo_do_ioctl = &ar6000_ioctl, +}; +/* + * HTC Event handlers + */ +static void +ar6000_avail_ev(HTC_HANDLE HTCHandle) +{ + int i; + struct net_device *dev; + AR_SOFTC_T *ar; + int device_index = 0; + + AR_DEBUG_PRINTF("ar6000_available\n"); + + for (i=0; i < MAX_AR6000; i++) { + if (ar6000_devices[i] == NULL) { + break; + } + } + + if (i == MAX_AR6000) { + AR_DEBUG_PRINTF("ar6000_available: max devices reached\n"); + return; + } + + /* Save this. It gives a bit better readability especially since */ + /* we use another local "i" variable below. */ + device_index = i; + + A_ASSERT(HTCHandle != NULL); + + dev = alloc_etherdev(sizeof(AR_SOFTC_T)); + if (dev == NULL) { + AR_DEBUG_PRINTF("ar6000_available: can't alloc etherdev\n"); + return; + } + + ether_setup(dev); + + if (netdev_priv(dev) == NULL) { + printk(KERN_CRIT "ar6000_available: Could not allocate memory\n"); + return; + } + + A_MEMZERO(netdev_priv(dev), sizeof(AR_SOFTC_T)); + + ar = (AR_SOFTC_T *)netdev_priv(dev); + ar->arNetDev = dev; + ar->arHtcTarget = HTCHandle; + ar->arHifDevice = HTCGetHifDevice(HTCHandle); + ar->arWlanState = WLAN_ENABLED; + ar->arRadioSwitch = WLAN_ENABLED; + ar->arDeviceIndex = device_index; + + A_INIT_TIMER(&ar->arHBChallengeResp.timer, ar6000_detect_error, dev); + ar->arHBChallengeResp.seqNum = 0; + ar->arHBChallengeResp.outstanding = FALSE; + ar->arHBChallengeResp.missCnt = 0; + ar->arHBChallengeResp.frequency = AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT; + ar->arHBChallengeResp.missThres = AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT; + + ar6000_init_control_info(ar); + init_waitqueue_head(&arEvent); + sema_init(&ar->arSem, 1); + + if (alloc_raw_buffers(ar)) { + free_raw_buffers(ar); + /* + * @@@ Clean up our own mess, but for anything else, cheerfully mimick + * the beautiful error non-handling of the rest of this function. + */ + return; + } + +#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL + A_INIT_TIMER(&aptcTimer, aptcTimerHandler, ar); +#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ + + /* + * If requested, perform some magic which requires no cooperation from + * the Target. It causes the Target to ignore flash and execute to the + * OS from ROM. + * + * This is intended to support recovery from a corrupted flash on Targets + * that support flash. + */ + if (skipflash) + { + ar6000_reset_device_skipflash(ar->arHifDevice); + } + + BMIInit(); + { + struct bmi_target_info targ_info; + + if (BMIGetTargetInfo(ar->arHifDevice, &targ_info) != A_OK) { + return; + } + + ar->arVersion.target_ver = targ_info.target_ver; + ar->arTargetType = targ_info.target_type; + } + + if (enableuartprint) { + A_UINT32 param; + param = 1; + if (BMIWriteMemory(ar->arHifDevice, + HOST_INTEREST_ITEM_ADDRESS(ar, hi_serial_enable), + (A_UCHAR *)¶m, + 4)!= A_OK) + { + AR_DEBUG_PRINTF("BMIWriteMemory for enableuartprint failed \n"); + return ; + } + AR_DEBUG_PRINTF("Serial console prints enabled\n"); + } +#ifdef CONFIG_HOST_TCMD_SUPPORT + if(testmode) { + ar->arTargetMode = AR6000_TCMD_MODE; + }else { + ar->arTargetMode = AR6000_WLAN_MODE; + } +#endif + if (enabletimerwar) { + A_UINT32 param; + + if (BMIReadMemory(ar->arHifDevice, + HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), + (A_UCHAR *)¶m, + 4)!= A_OK) + { + AR_DEBUG_PRINTF("BMIReadMemory for enabletimerwar failed \n"); + return; + } + + param |= HI_OPTION_TIMER_WAR; + + if (BMIWriteMemory(ar->arHifDevice, + HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag), + (A_UCHAR *)¶m, + 4) != A_OK) + { + AR_DEBUG_PRINTF("BMIWriteMemory for enabletimerwar failed \n"); + return; + } + AR_DEBUG_PRINTF("Timer WAR enabled\n"); + } + + + /* since BMIInit is called in the driver layer, we have to set the block + * size here for the target */ + + if (A_FAILED(ar6000_SetHTCBlockSize(ar))) { + return; + } + + spin_lock_init(&ar->arLock); + + dev->netdev_ops = &ar6000_netdev_ops; + dev->watchdog_timeo = AR6000_TX_TIMEOUT; + ar6000_ioctl_iwsetup(&ath_iw_handler_def); + dev->wireless_handlers = &ath_iw_handler_def; + ath_iw_handler_def.get_wireless_stats = ar6000_get_iwstats; /*Displayed via proc fs */ + + /* + * We need the OS to provide us with more headroom in order to + * perform dix to 802.3, WMI header encap, and the HTC header + */ + dev->hard_header_len = ETH_HLEN + sizeof(ATH_LLC_SNAP_HDR) + + sizeof(WMI_DATA_HDR) + HTC_HEADER_LEN; + + /* This runs the init function */ + SET_NETDEV_DEV(dev, HIFGetOSDevice(ar->arHifDevice)); + if (register_netdev(dev)) { + AR_DEBUG_PRINTF("ar6000_avail: register_netdev failed\n"); + ar6000_destroy(dev, 0); + return; + } + + HTCSetInstance(ar->arHtcTarget, ar); + + /* We only register the device in the global list if we succeed. */ + /* If the device is in the global list, it will be destroyed */ + /* when the module is unloaded. */ + ar6000_devices[device_index] = dev; + + AR_DEBUG_PRINTF("ar6000_avail: name=%s htcTarget=0x%x, dev=0x%x (%d), ar=0x%x\n", + dev->name, (A_UINT32)HTCHandle, (A_UINT32)dev, device_index, + (A_UINT32)ar); +} + +static void ar6000_target_failure(void *Instance, A_STATUS Status) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance; + WMI_TARGET_ERROR_REPORT_EVENT errEvent; + static A_BOOL sip = FALSE; + + if (Status != A_OK) { + if (timer_pending(&ar->arHBChallengeResp.timer)) { + A_UNTIMEOUT(&ar->arHBChallengeResp.timer); + } + + /* try dumping target assertion information (if any) */ + ar6000_dump_target_assert_info(ar->arHifDevice,ar->arTargetType); + + /* + * Fetch the logs from the target via the diagnostic + * window. + */ + ar6000_dbglog_get_debug_logs(ar); + + /* Report the error only once */ + if (!sip) { + sip = TRUE; + errEvent.errorVal = WMI_TARGET_COM_ERR | + WMI_TARGET_FATAL_ERR; +#ifdef SEND_EVENT_TO_APP + ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID, + (A_UINT8 *)&errEvent, + sizeof(WMI_TARGET_ERROR_REPORT_EVENT)); +#endif + } + } +} + +static void +ar6000_unavail_ev(void *Instance) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance; + /* NULL out it's entry in the global list */ + ar6000_devices[ar->arDeviceIndex] = NULL; + ar6000_destroy(ar->arNetDev, 1); +} + +/* + * We need to differentiate between the surprise and planned removal of the + * device because of the following consideration: + * - In case of surprise removal, the hcd already frees up the pending + * for the device and hence there is no need to unregister the function + * driver inorder to get these requests. For planned removal, the function + * driver has to explictly unregister itself to have the hcd return all the + * pending requests before the data structures for the devices are freed up. + * Note that as per the current implementation, the function driver will + * end up releasing all the devices since there is no API to selectively + * release a particular device. + * - Certain commands issued to the target can be skipped for surprise + * removal since they will anyway not go through. + */ +static void +ar6000_destroy(struct net_device *dev, unsigned int unregister) +{ + AR_SOFTC_T *ar; + + AR_DEBUG_PRINTF("+ar6000_destroy \n"); + + if((dev == NULL) || ((ar = netdev_priv(dev)) == NULL)) + { + AR_DEBUG_PRINTF("%s(): Failed to get device structure.\n", __func__); + return; + } + + /* Clear the tx counters */ + memset(tx_attempt, 0, sizeof(tx_attempt)); + memset(tx_post, 0, sizeof(tx_post)); + memset(tx_complete, 0, sizeof(tx_complete)); + + /* Free up the device data structure */ + if (unregister) { + unregister_netdev(dev); + } else { + ar6000_close(dev); + ar6000_cleanup(dev); + } + + free_raw_buffers(ar); + +#ifndef free_netdev + kfree(dev); +#else + free_netdev(dev); +#endif + + AR_DEBUG_PRINTF("-ar6000_destroy \n"); +} + +static void ar6000_detect_error(unsigned long ptr) +{ + struct net_device *dev = (struct net_device *)ptr; + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_TARGET_ERROR_REPORT_EVENT errEvent; + + AR6000_SPIN_LOCK(&ar->arLock, 0); + + if (ar->arHBChallengeResp.outstanding) { + ar->arHBChallengeResp.missCnt++; + } else { + ar->arHBChallengeResp.missCnt = 0; + } + + if (ar->arHBChallengeResp.missCnt > ar->arHBChallengeResp.missThres) { + /* Send Error Detect event to the application layer and do not reschedule the error detection module timer */ + ar->arHBChallengeResp.missCnt = 0; + ar->arHBChallengeResp.seqNum = 0; + errEvent.errorVal = WMI_TARGET_COM_ERR | WMI_TARGET_FATAL_ERR; + AR6000_SPIN_UNLOCK(&ar->arLock, 0); +#ifdef SEND_EVENT_TO_APP + ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID, + (A_UINT8 *)&errEvent, + sizeof(WMI_TARGET_ERROR_REPORT_EVENT)); +#endif + return; + } + + /* Generate the sequence number for the next challenge */ + ar->arHBChallengeResp.seqNum++; + ar->arHBChallengeResp.outstanding = TRUE; + + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + + /* Send the challenge on the control channel */ + if (wmi_get_challenge_resp_cmd(ar->arWmi, ar->arHBChallengeResp.seqNum, DRV_HB_CHALLENGE) != A_OK) { + AR_DEBUG_PRINTF("Unable to send heart beat challenge\n"); + } + + + /* Reschedule the timer for the next challenge */ + A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0); +} + +void ar6000_init_profile_info(AR_SOFTC_T *ar) +{ + ar->arSsidLen = 0; + A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); + ar->arNetworkType = INFRA_NETWORK; + ar->arDot11AuthMode = OPEN_AUTH; + ar->arAuthMode = NONE_AUTH; + ar->arPairwiseCrypto = NONE_CRYPT; + ar->arPairwiseCryptoLen = 0; + ar->arGroupCrypto = NONE_CRYPT; + ar->arGroupCryptoLen = 0; + A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList)); + A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid)); + A_MEMZERO(ar->arBssid, sizeof(ar->arBssid)); + ar->arBssChannel = 0; +} + +static void +ar6000_init_control_info(AR_SOFTC_T *ar) +{ + ar->arWmiEnabled = FALSE; + ar6000_init_profile_info(ar); + ar->arDefTxKeyIndex = 0; + A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList)); + ar->arChannelHint = 0; + ar->arListenInterval = MAX_LISTEN_INTERVAL; + ar->arVersion.host_ver = AR6K_SW_VERSION; + ar->arRssi = 0; + ar->arTxPwr = 0; + ar->arTxPwrSet = FALSE; + ar->arSkipScan = 0; + ar->arBeaconInterval = 0; + ar->arBitRate = 0; + ar->arMaxRetries = 0; + ar->arWmmEnabled = TRUE; +} + +static int +ar6000_open(struct net_device *dev) +{ + /* Wake up the queues */ + netif_start_queue(dev); + + return 0; +} + +static int +ar6000_close(struct net_device *dev) +{ + /* Stop the transmit queues */ + netif_stop_queue(dev); + return 0; +} + +static int +ar6000_cleanup(struct net_device *dev) +{ + AR_SOFTC_T *ar = netdev_priv(dev); + + /* Stop the transmit queues */ + netif_stop_queue(dev); + + /* Disable the target and the interrupts associated with it */ + if (ar->arWmiReady == TRUE) + { + if (!bypasswmi) + { + if (ar->arConnected == TRUE || ar->arConnectPending == TRUE) + { + AR_DEBUG_PRINTF("%s(): Disconnect\n", __func__); + AR6000_SPIN_LOCK(&ar->arLock, 0); + ar6000_init_profile_info(ar); + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + wmi_disconnect_cmd(ar->arWmi); + } + + ar6000_dbglog_get_debug_logs(ar); + ar->arWmiReady = FALSE; + ar->arConnected = FALSE; + ar->arConnectPending = FALSE; + wmi_shutdown(ar->arWmi); + ar->arWmiEnabled = FALSE; + ar->arWmi = NULL; + ar->arWlanState = WLAN_ENABLED; +#ifdef USER_KEYS + ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT; + ar->user_key_ctrl = 0; +#endif + } + + AR_DEBUG_PRINTF("%s(): WMI stopped\n", __func__); + } + else + { + AR_DEBUG_PRINTF("%s(): WMI not ready 0x%08x 0x%08x\n", + __func__, (unsigned int) ar, (unsigned int) ar->arWmi); + + /* Shut down WMI if we have started it */ + if(ar->arWmiEnabled == TRUE) + { + AR_DEBUG_PRINTF("%s(): Shut down WMI\n", __func__); + wmi_shutdown(ar->arWmi); + ar->arWmiEnabled = FALSE; + ar->arWmi = NULL; + } + } + + /* stop HTC */ + HTCStop(ar->arHtcTarget); + + /* set the instance to NULL so we do not get called back on remove incase we + * we're explicity destroyed by module unload */ + HTCSetInstance(ar->arHtcTarget, NULL); + + if (resetok) { + /* try to reset the device if we can + * The driver may have been configure NOT to reset the target during + * a debug session */ + AR_DEBUG_PRINTF(" Attempting to reset target on instance destroy.... \n"); + ar6000_reset_device(ar->arHifDevice, ar->arTargetType); + } else { + AR_DEBUG_PRINTF(" Host does not want target reset. \n"); + } + + /* Done with cookies */ + ar6000_cookie_cleanup(ar); + + /* Cleanup BMI */ + BMIInit(); + + return 0; +} + +/* connect to a service */ +static A_STATUS ar6000_connectservice(AR_SOFTC_T *ar, + HTC_SERVICE_CONNECT_REQ *pConnect, + WMI_PRI_STREAM_ID WmiStreamID, + char *pDesc) +{ + A_STATUS status; + HTC_SERVICE_CONNECT_RESP response; + + do { + + A_MEMZERO(&response,sizeof(response)); + + status = HTCConnectService(ar->arHtcTarget, + pConnect, + &response); + + if (A_FAILED(status)) { + AR_DEBUG_PRINTF(" Failed to connect to %s service status:%d \n", pDesc, status); + break; + } + + if (WmiStreamID == WMI_NOT_MAPPED) { + /* done */ + break; + } + + /* set endpoint mapping for the WMI stream in the driver layer */ + arSetWMIStream2EndpointIDMap(ar,WmiStreamID,response.Endpoint); + + } while (FALSE); + + return status; +} + +static void ar6000_TxDataCleanup(AR_SOFTC_T *ar) +{ + /* flush all the data (non-control) streams + * we only flush packets that are tagged as data, we leave any control packets that + * were in the TX queues alone */ + HTCFlushEndpoint(ar->arHtcTarget, + arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI), + AR6K_DATA_PKT_TAG); + HTCFlushEndpoint(ar->arHtcTarget, + arWMIStream2EndpointID(ar,WMI_LOW_PRI), + AR6K_DATA_PKT_TAG); + HTCFlushEndpoint(ar->arHtcTarget, + arWMIStream2EndpointID(ar,WMI_HIGH_PRI), + AR6K_DATA_PKT_TAG); + HTCFlushEndpoint(ar->arHtcTarget, + arWMIStream2EndpointID(ar,WMI_HIGHEST_PRI), + AR6K_DATA_PKT_TAG); +} + +/* This function does one time initialization for the lifetime of the device */ +int ar6000_init(struct net_device *dev) +{ + AR_SOFTC_T *ar; + A_STATUS status; + A_INT32 timeleft; + + if((ar = netdev_priv(dev)) == NULL) + { + return(-EIO); + } + + /* Do we need to finish the BMI phase */ + if(BMIDone(ar->arHifDevice) != A_OK) + { + return -EIO; + } + + if (!bypasswmi) + { +#if 0 /* TBDXXX */ + if (ar->arVersion.host_ver != ar->arVersion.target_ver) { + A_PRINTF("WARNING: Host version 0x%x does not match Target " + " version 0x%x!\n", + ar->arVersion.host_ver, ar->arVersion.target_ver); + } +#endif + + /* Indicate that WMI is enabled (although not ready yet) */ + ar->arWmiEnabled = TRUE; + if ((ar->arWmi = wmi_init((void *) ar)) == NULL) + { + AR_DEBUG_PRINTF("%s() Failed to initialize WMI.\n", __func__); + return(-EIO); + } + + AR_DEBUG_PRINTF("%s() Got WMI @ 0x%08x.\n", __func__, + (unsigned int) ar->arWmi); + } + + do { + HTC_SERVICE_CONNECT_REQ connect; + + /* the reason we have to wait for the target here is that the driver layer + * has to init BMI in order to set the host block size, + */ + status = HTCWaitTarget(ar->arHtcTarget); + + if (A_FAILED(status)) { + break; + } + + A_MEMZERO(&connect,sizeof(connect)); + /* meta data is unused for now */ + connect.pMetaData = NULL; + connect.MetaDataLength = 0; + /* these fields are the same for all service endpoints */ + connect.EpCallbacks.pContext = ar; + connect.EpCallbacks.EpTxComplete = ar6000_tx_complete; + connect.EpCallbacks.EpRecv = ar6000_rx; + connect.EpCallbacks.EpRecvRefill = ar6000_rx_refill; + connect.EpCallbacks.EpSendFull = ar6000_tx_queue_full; + connect.EpCallbacks.EpSendAvail = ar6000_tx_queue_avail; + /* set the max queue depth so that our ar6000_tx_queue_full handler gets called. + * Linux has the peculiarity of not providing flow control between the + * NIC and the network stack. There is no API to indicate that a TX packet + * was sent which could provide some back pressure to the network stack. + * Under linux you would have to wait till the network stack consumed all sk_buffs + * before any back-flow kicked in. Which isn't very friendly. + * So we have to manage this ourselves */ + connect.MaxSendQueueDepth = 32; + + /* connect to control service */ + connect.ServiceID = WMI_CONTROL_SVC; + status = ar6000_connectservice(ar, + &connect, + WMI_CONTROL_PRI, + "WMI CONTROL"); + if (A_FAILED(status)) { + break; + } + + /* for the remaining data services set the connection flag to reduce dribbling, + * if configured to do so */ + if (reduce_credit_dribble) { + connect.ConnectionFlags |= HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE; + /* the credit dribble trigger threshold is (reduce_credit_dribble - 1) for a value + * of 0-3 */ + connect.ConnectionFlags &= ~HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK; + connect.ConnectionFlags |= + ((A_UINT16)reduce_credit_dribble - 1) & HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK; + } + /* connect to best-effort service */ + connect.ServiceID = WMI_DATA_BE_SVC; + + status = ar6000_connectservice(ar, + &connect, + WMI_BEST_EFFORT_PRI, + "WMI DATA BE"); + if (A_FAILED(status)) { + break; + } + + /* connect to back-ground + * map this to WMI LOW_PRI */ + connect.ServiceID = WMI_DATA_BK_SVC; + status = ar6000_connectservice(ar, + &connect, + WMI_LOW_PRI, + "WMI DATA BK"); + if (A_FAILED(status)) { + break; + } + + /* connect to Video service, map this to + * to HI PRI */ + connect.ServiceID = WMI_DATA_VI_SVC; + status = ar6000_connectservice(ar, + &connect, + WMI_HIGH_PRI, + "WMI DATA VI"); + if (A_FAILED(status)) { + break; + } + + /* connect to VO service, this is currently not + * mapped to a WMI priority stream due to historical reasons. + * WMI originally defined 3 priorities over 3 mailboxes + * We can change this when WMI is reworked so that priorities are not + * dependent on mailboxes */ + connect.ServiceID = WMI_DATA_VO_SVC; + status = ar6000_connectservice(ar, + &connect, + WMI_HIGHEST_PRI, + "WMI DATA VO"); + if (A_FAILED(status)) { + break; + } + + A_ASSERT(arWMIStream2EndpointID(ar,WMI_CONTROL_PRI) != 0); + A_ASSERT(arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI) != 0); + A_ASSERT(arWMIStream2EndpointID(ar,WMI_LOW_PRI) != 0); + A_ASSERT(arWMIStream2EndpointID(ar,WMI_HIGH_PRI) != 0); + A_ASSERT(arWMIStream2EndpointID(ar,WMI_HIGHEST_PRI) != 0); + } while (FALSE); + + if (A_FAILED(status)) { + return (-EIO); + } + + /* + * give our connected endpoints some buffers + */ + ar6000_rx_refill(ar, arWMIStream2EndpointID(ar,WMI_CONTROL_PRI)); + + ar6000_rx_refill(ar, arWMIStream2EndpointID(ar,WMI_BEST_EFFORT_PRI)); + + /* + * We will post the receive buffers only for SPE testing and so we are + * making it conditional on the 'bypasswmi' flag. + */ + if (bypasswmi) { + ar6000_rx_refill(ar,arWMIStream2EndpointID(ar,WMI_LOW_PRI)); + ar6000_rx_refill(ar,arWMIStream2EndpointID(ar,WMI_HIGH_PRI)); + } + + /* setup credit distribution */ + ar6000_setup_credit_dist(ar->arHtcTarget, &ar->arCreditStateInfo); + + /* Since cookies are used for HTC transports, they should be */ + /* initialized prior to enabling HTC. */ + ar6000_cookie_init(ar); + + /* start HTC */ + status = HTCStart(ar->arHtcTarget); + + if (status != A_OK) { + if (ar->arWmiEnabled == TRUE) { + wmi_shutdown(ar->arWmi); + ar->arWmiEnabled = FALSE; + ar->arWmi = NULL; + } + ar6000_cookie_cleanup(ar); + return -EIO; + } + + if (!bypasswmi) { + /* Wait for Wmi event to be ready */ + timeleft = wait_event_interruptible_timeout(arEvent, + (ar->arWmiReady == TRUE), wmitimeout * HZ); + + if(!timeleft || signal_pending(current)) + { + AR_DEBUG_PRINTF("WMI is not ready or wait was interrupted\n"); +#if defined(DWSIM) /* TBDXXX */ + AR_DEBUG_PRINTF(".....but proceed anyway.\n"); +#else + return -EIO; +#endif + } + + AR_DEBUG_PRINTF("%s() WMI is ready\n", __func__); + + /* Communicate the wmi protocol verision to the target */ + if ((ar6000_set_host_app_area(ar)) != A_OK) { + AR_DEBUG_PRINTF("Unable to set the host app area\n"); + } + } + + ar->arNumDataEndPts = 1; + + return(0); +} + + +void +ar6000_bitrate_rx(void *devt, A_INT32 rateKbps) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; + + ar->arBitRate = rateKbps; + wake_up(&arEvent); +} + +void +ar6000_ratemask_rx(void *devt, A_UINT16 ratemask) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; + + ar->arRateMask = ratemask; + wake_up(&arEvent); +} + +void +ar6000_txPwr_rx(void *devt, A_UINT8 txPwr) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; + + ar->arTxPwr = txPwr; + wake_up(&arEvent); +} + + +void +ar6000_channelList_rx(void *devt, A_INT8 numChan, A_UINT16 *chanList) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; + + A_MEMCPY(ar->arChannelList, chanList, numChan * sizeof (A_UINT16)); + ar->arNumChannels = numChan; + + wake_up(&arEvent); +} + +A_UINT8 +ar6000_ibss_map_epid(struct sk_buff *skb, struct net_device *dev, A_UINT32 * mapNo) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + A_UINT8 *datap; + ATH_MAC_HDR *macHdr; + A_UINT32 i, eptMap; + + (*mapNo) = 0; + datap = A_NETBUF_DATA(skb); + macHdr = (ATH_MAC_HDR *)(datap + sizeof(WMI_DATA_HDR)); + if (IEEE80211_IS_MULTICAST(macHdr->dstMac)) { + return ENDPOINT_2; + } + + eptMap = -1; + for (i = 0; i < ar->arNodeNum; i ++) { + if (IEEE80211_ADDR_EQ(macHdr->dstMac, ar->arNodeMap[i].macAddress)) { + (*mapNo) = i + 1; + ar->arNodeMap[i].txPending ++; + return ar->arNodeMap[i].epId; + } + + if ((eptMap == -1) && !ar->arNodeMap[i].txPending) { + eptMap = i; + } + } + + if (eptMap == -1) { + eptMap = ar->arNodeNum; + ar->arNodeNum ++; + A_ASSERT(ar->arNodeNum <= MAX_NODE_NUM); + } + + A_MEMCPY(ar->arNodeMap[eptMap].macAddress, macHdr->dstMac, IEEE80211_ADDR_LEN); + + for (i = ENDPOINT_2; i <= ENDPOINT_5; i ++) { + if (!ar->arTxPending[i]) { + ar->arNodeMap[eptMap].epId = i; + break; + } + // No free endpoint is available, start redistribution on the inuse endpoints. + if (i == ENDPOINT_5) { + ar->arNodeMap[eptMap].epId = ar->arNexEpId; + ar->arNexEpId ++; + if (ar->arNexEpId > ENDPOINT_5) { + ar->arNexEpId = ENDPOINT_2; + } + } + } + + (*mapNo) = eptMap + 1; + ar->arNodeMap[eptMap].txPending ++; + + return ar->arNodeMap[eptMap].epId; +} + +#ifdef DEBUG +static void ar6000_dump_skb(struct sk_buff *skb) +{ + u_char *ch; + for (ch = A_NETBUF_DATA(skb); + (A_UINT32)ch < ((A_UINT32)A_NETBUF_DATA(skb) + + A_NETBUF_LEN(skb)); ch++) + { + AR_DEBUG_PRINTF("%2.2x ", *ch); + } + AR_DEBUG_PRINTF("\n"); +} +#endif + +static int +ar6000_data_tx(struct sk_buff *skb, struct net_device *dev) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_PRI_STREAM_ID streamID = WMI_NOT_MAPPED; + A_UINT32 mapNo = 0; + int len; + struct ar_cookie *cookie; + A_BOOL checkAdHocPsMapping = FALSE; + +#if LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,13) + skb->list = NULL; +#endif + + AR_DEBUG2_PRINTF("ar6000_data_tx start - skb=0x%x, data=0x%x, len=0x%x\n", + (A_UINT32)skb, (A_UINT32)A_NETBUF_DATA(skb), + A_NETBUF_LEN(skb)); +#ifdef CONFIG_HOST_TCMD_SUPPORT + /* TCMD doesnt support any data, free the buf and return */ + if(ar->arTargetMode == AR6000_TCMD_MODE) { + A_NETBUF_FREE(skb); + return 0; + } +#endif + do { + + if (ar->arWmiReady == FALSE && bypasswmi == 0) { + break; + } + +#ifdef BLOCK_TX_PATH_FLAG + if (blocktx) { + break; + } +#endif /* BLOCK_TX_PATH_FLAG */ + + if (ar->arWmiEnabled) { + if (A_NETBUF_HEADROOM(skb) < dev->hard_header_len) { + struct sk_buff *newbuf; + /* + * We really should have gotten enough headroom but sometimes + * we still get packets with not enough headroom. Copy the packet. + */ + len = A_NETBUF_LEN(skb); + newbuf = A_NETBUF_ALLOC(len); + if (newbuf == NULL) { + break; + } + A_NETBUF_PUT(newbuf, len); + A_MEMCPY(A_NETBUF_DATA(newbuf), A_NETBUF_DATA(skb), len); + A_NETBUF_FREE(skb); + skb = newbuf; + /* fall through and assemble header */ + } + + if (wmi_dix_2_dot3(ar->arWmi, skb) != A_OK) { + AR_DEBUG_PRINTF("ar6000_data_tx - wmi_dix_2_dot3 failed\n"); + break; + } + + if (wmi_data_hdr_add(ar->arWmi, skb, DATA_MSGTYPE) != A_OK) { + AR_DEBUG_PRINTF("ar6000_data_tx - wmi_data_hdr_add failed\n"); + break; + } + + if ((ar->arNetworkType == ADHOC_NETWORK) && + ar->arIbssPsEnable && ar->arConnected) { + /* flag to check adhoc mapping once we take the lock below: */ + checkAdHocPsMapping = TRUE; + + } else { + /* get the stream mapping */ + if (ar->arWmmEnabled) { + streamID = wmi_get_stream_id(ar->arWmi, + wmi_implicit_create_pstream(ar->arWmi, skb, UPLINK_TRAFFIC, UNDEFINED_PRI)); + } else { + streamID = WMI_BEST_EFFORT_PRI; + } + } + + } else { + struct iphdr *ipHdr; + /* + * the endpoint is directly based on the TOS field in the IP + * header **** only for testing ****** + */ + ipHdr = A_NETBUF_DATA(skb) + sizeof(ATH_MAC_HDR); + /* here we map the TOS field to an endpoint number, this is for + * the endpointping test application */ + streamID = IP_TOS_TO_WMI_PRI(ipHdr->tos); + } + + } while (FALSE); + + /* did we succeed ? */ + if ((streamID == WMI_NOT_MAPPED) && !checkAdHocPsMapping) { + /* cleanup and exit */ + A_NETBUF_FREE(skb); + AR6000_STAT_INC(ar, tx_dropped); + AR6000_STAT_INC(ar, tx_aborted_errors); + return 0; + } + + cookie = NULL; + + /* take the lock to protect driver data */ + AR6000_SPIN_LOCK(&ar->arLock, 0); + + do { + + if (checkAdHocPsMapping) { + streamID = ar6000_ibss_map_epid(skb, dev, &mapNo); + } + + A_ASSERT(streamID != WMI_NOT_MAPPED); + + /* validate that the endpoint is connected */ + if (arWMIStream2EndpointID(ar,streamID) == 0) { + AR_DEBUG_PRINTF("Stream %d is NOT mapped!\n",streamID); + break; + } + /* allocate resource for this packet */ + cookie = ar6000_alloc_cookie(ar); + + if (cookie != NULL) { + /* update counts while the lock is held */ + ar->arTxPending[streamID]++; + ar->arTotalTxDataPending++; + } + + } while (FALSE); + + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + + if (cookie != NULL) { + cookie->arc_bp[0] = (A_UINT32)skb; + cookie->arc_bp[1] = mapNo; + SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt, + cookie, + A_NETBUF_DATA(skb), + A_NETBUF_LEN(skb), + arWMIStream2EndpointID(ar,streamID), + AR6K_DATA_PKT_TAG); + +#ifdef DEBUG + if (debugdriver >= 3) { + ar6000_dump_skb(skb); + } +#endif + /* HTC interface is asynchronous, if this fails, cleanup will happen in + * the ar6000_tx_complete callback */ + HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt); + } else { + /* no packet to send, cleanup */ + A_NETBUF_FREE(skb); + AR6000_STAT_INC(ar, tx_dropped); + AR6000_STAT_INC(ar, tx_aborted_errors); + } + + return 0; +} + +#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL +static void +tvsub(register struct timeval *out, register struct timeval *in) +{ + if((out->tv_usec -= in->tv_usec) < 0) { + out->tv_sec--; + out->tv_usec += 1000000; + } + out->tv_sec -= in->tv_sec; +} + +void +applyAPTCHeuristics(AR_SOFTC_T *ar) +{ + A_UINT32 duration; + A_UINT32 numbytes; + A_UINT32 throughput; + struct timeval ts; + A_STATUS status; + + AR6000_SPIN_LOCK(&ar->arLock, 0); + + if ((enableAPTCHeuristics) && (!aptcTR.timerScheduled)) { + do_gettimeofday(&ts); + tvsub(&ts, &aptcTR.samplingTS); + duration = ts.tv_sec * 1000 + ts.tv_usec / 1000; /* ms */ + numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived; + + if (duration > APTC_TRAFFIC_SAMPLING_INTERVAL) { + /* Initialize the time stamp and byte count */ + aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0; + do_gettimeofday(&aptcTR.samplingTS); + + /* Calculate and decide based on throughput thresholds */ + throughput = ((numbytes * 8) / duration); + if (throughput > APTC_UPPER_THROUGHPUT_THRESHOLD) { + /* Disable Sleep and schedule a timer */ + A_ASSERT(ar->arWmiReady == TRUE); + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + status = wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER); + AR6000_SPIN_LOCK(&ar->arLock, 0); + A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0); + aptcTR.timerScheduled = TRUE; + } + } + } + + AR6000_SPIN_UNLOCK(&ar->arLock, 0); +} +#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ + +static void +ar6000_tx_queue_full(void *Context, HTC_ENDPOINT_ID Endpoint) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *) Context; + + if (Endpoint == arWMIStream2EndpointID(ar,WMI_CONTROL_PRI)) { + if (!bypasswmi) { + /* under normal WMI if this is getting full, then something is running rampant + * the host should not be exhausting the WMI queue with too many commands + * the only exception to this is during testing using endpointping */ + + AR6000_SPIN_LOCK(&ar->arLock, 0); + /* set flag to handle subsequent messages */ + ar->arWMIControlEpFull = TRUE; + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + AR_DEBUG_PRINTF("WMI Control Endpoint is FULL!!! \n"); + } + } else { + /* one of the data endpoints queues is getting full..need to stop network stack + * the queue will resume after credits received */ + netif_stop_queue(ar->arNetDev); + } +} + +static void +ar6000_tx_queue_avail(void *Context, HTC_ENDPOINT_ID Endpoint) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)Context; + + if (Endpoint == arWMIStream2EndpointID(ar,WMI_CONTROL_PRI)) { + /* FIXME: what do for it? */ + } else { + /* Wake up interface, rescheduling prevented. */ + if (ar->arConnected == TRUE || bypasswmi) + netif_wake_queue(ar->arNetDev); + } +} + +static void +ar6000_tx_complete(void *Context, HTC_PACKET *pPacket) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)Context; + void *cookie = (void *)pPacket->pPktContext; + struct sk_buff *skb = NULL; + A_UINT32 mapNo = 0; + A_STATUS status; + struct ar_cookie * ar_cookie; + WMI_PRI_STREAM_ID streamID; + A_BOOL wakeEvent = FALSE; + + status = pPacket->Status; + ar_cookie = (struct ar_cookie *)cookie; + skb = (struct sk_buff *)ar_cookie->arc_bp[0]; + streamID = arEndpoint2WMIStreamID(ar,pPacket->Endpoint); + mapNo = ar_cookie->arc_bp[1]; + + A_ASSERT(skb); + A_ASSERT(pPacket->pBuffer == A_NETBUF_DATA(skb)); + + if (A_SUCCESS(status)) { + A_ASSERT(pPacket->ActualLength == A_NETBUF_LEN(skb)); + } + + AR_DEBUG2_PRINTF("ar6000_tx_complete skb=0x%x data=0x%x len=0x%x sid=%d ", + (A_UINT32)skb, (A_UINT32)pPacket->pBuffer, + pPacket->ActualLength, + streamID); + + /* lock the driver as we update internal state */ + AR6000_SPIN_LOCK(&ar->arLock, 0); + + ar->arTxPending[streamID]--; + + if ((streamID != WMI_CONTROL_PRI) || bypasswmi) { + ar->arTotalTxDataPending--; + } + + if (streamID == WMI_CONTROL_PRI) + { + if (ar->arWMIControlEpFull) { + /* since this packet completed, the WMI EP is no longer full */ + ar->arWMIControlEpFull = FALSE; + } + + if (ar->arTxPending[streamID] == 0) { + wakeEvent = TRUE; + } + } + + if (A_FAILED(status)) { + AR_DEBUG_PRINTF("%s() -TX ERROR, status: 0x%x\n", __func__, + status); + AR6000_STAT_INC(ar, tx_errors); + } else { + AR_DEBUG2_PRINTF("OK\n"); + AR6000_STAT_INC(ar, tx_packets); + ar->arNetStats.tx_bytes += A_NETBUF_LEN(skb); +#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL + aptcTR.bytesTransmitted += a_netbuf_to_len(skb); + applyAPTCHeuristics(ar); +#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ + } + + // TODO this needs to be looked at + if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable + && (streamID != WMI_CONTROL_PRI) && mapNo) + { + mapNo --; + ar->arNodeMap[mapNo].txPending --; + + if (!ar->arNodeMap[mapNo].txPending && (mapNo == (ar->arNodeNum - 1))) { + A_UINT32 i; + for (i = ar->arNodeNum; i > 0; i --) { + if (!ar->arNodeMap[i - 1].txPending) { + A_MEMZERO(&ar->arNodeMap[i - 1], sizeof(struct ar_node_mapping)); + ar->arNodeNum --; + } else { + break; + } + } + } + } + + /* Freeing a cookie should not be contingent on either of */ + /* these flags, just if we have a cookie or not. */ + /* Can we even get here without a cookie? Fix later. */ + if (ar->arWmiReady == TRUE || (bypasswmi)) + { + ar6000_free_cookie(ar, cookie); + } + + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + + /* lock is released, we can freely call other kernel APIs */ + + /* this indirectly frees the HTC_PACKET */ + A_NETBUF_FREE(skb); + + if (wakeEvent) { + wake_up(&arEvent); + } +} + +/* + * Receive event handler. This is called by HTC when a packet is received + */ +int pktcount; +static void +ar6000_rx(void *Context, HTC_PACKET *pPacket) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)Context; + struct sk_buff *skb = (struct sk_buff *)pPacket->pPktContext; + int minHdrLen; + A_STATUS status = pPacket->Status; + WMI_PRI_STREAM_ID streamID = arEndpoint2WMIStreamID(ar,pPacket->Endpoint); + HTC_ENDPOINT_ID ept = pPacket->Endpoint; + + A_ASSERT((status != A_OK) || (pPacket->pBuffer == (A_NETBUF_DATA(skb) + HTC_HEADER_LEN))); + + AR_DEBUG2_PRINTF("ar6000_rx ar=0x%x sid=%d, skb=0x%x, data=0x%x, len=0x%x ", + (A_UINT32)ar, streamID, (A_UINT32)skb, (A_UINT32)pPacket->pBuffer, + pPacket->ActualLength); + if (status != A_OK) { + AR_DEBUG2_PRINTF("ERR\n"); + } else { + AR_DEBUG2_PRINTF("OK\n"); + } + + /* take lock to protect buffer counts + * and adaptive power throughput state */ + AR6000_SPIN_LOCK(&ar->arLock, 0); + + ar->arRxBuffers[streamID]--; + + if (A_SUCCESS(status)) { + AR6000_STAT_INC(ar, rx_packets); + ar->arNetStats.rx_bytes += pPacket->ActualLength; +#ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL + aptcTR.bytesReceived += a_netbuf_to_len(skb); + applyAPTCHeuristics(ar); +#endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */ + + A_NETBUF_PUT(skb, pPacket->ActualLength + HTC_HEADER_LEN); + A_NETBUF_PULL(skb, HTC_HEADER_LEN); + +#ifdef DEBUG + if (debugdriver >= 2) { + ar6000_dump_skb(skb); + } +#endif /* DEBUG */ + } + + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + + if (status != A_OK) { + AR6000_STAT_INC(ar, rx_errors); + A_NETBUF_FREE(skb); + } else if (ar->arWmiEnabled == TRUE) { + if (streamID == WMI_CONTROL_PRI) { + /* + * this is a wmi control msg + */ + wmi_control_rx(ar->arWmi, skb); + } else { + WMI_DATA_HDR *dhdr = (WMI_DATA_HDR *)A_NETBUF_DATA(skb); + if (WMI_DATA_HDR_IS_MSG_TYPE(dhdr, CNTL_MSGTYPE)) { + /* + * this is a wmi control msg + */ + /* strip off WMI hdr */ + wmi_data_hdr_remove(ar->arWmi, skb); + wmi_control_rx(ar->arWmi, skb); + } else { + /* + * this is a wmi data packet + */ + minHdrLen = sizeof (WMI_DATA_HDR) + sizeof(ATH_MAC_HDR) + + sizeof(ATH_LLC_SNAP_HDR); + + if ((pPacket->ActualLength < minHdrLen) || + (pPacket->ActualLength > AR6000_BUFFER_SIZE)) + { + /* + * packet is too short or too long + */ + AR_DEBUG_PRINTF("TOO SHORT or TOO LONG\n"); + AR6000_STAT_INC(ar, rx_errors); + AR6000_STAT_INC(ar, rx_length_errors); + A_NETBUF_FREE(skb); + } else { + if (ar->arWmmEnabled) { + wmi_implicit_create_pstream(ar->arWmi, skb, + DNLINK_TRAFFIC, UNDEFINED_PRI); + } +#if 0 + /* Access RSSI values here */ + AR_DEBUG_PRINTF("RSSI %d\n", + ((WMI_DATA_HDR *) A_NETBUF_DATA(skb))->rssi); +#endif + wmi_data_hdr_remove(ar->arWmi, skb); + wmi_dot3_2_dix(ar->arWmi, skb); + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0) + /* + * extra push and memcpy, for eth_type_trans() of 2.4 kernel + * will pull out hard_header_len bytes of the skb. + */ + A_NETBUF_PUSH(skb, sizeof(WMI_DATA_HDR) + sizeof(ATH_LLC_SNAP_HDR) + HTC_HEADER_LEN); + A_MEMCPY(A_NETBUF_DATA(skb), A_NETBUF_DATA(skb) + sizeof(WMI_DATA_HDR) + + sizeof(ATH_LLC_SNAP_HDR) + HTC_HEADER_LEN, sizeof(ATH_MAC_HDR)); +#endif + if ((ar->arNetDev->flags & IFF_UP) == IFF_UP) + { + skb->dev = ar->arNetDev; + skb->protocol = eth_type_trans(skb, ar->arNetDev); + netif_rx(skb); + } + else + { + A_NETBUF_FREE(skb); + } + } + } + } + } else { + if ((ar->arNetDev->flags & IFF_UP) == IFF_UP) + { + skb->dev = ar->arNetDev; + skb->protocol = eth_type_trans(skb, ar->arNetDev); + netif_rx(skb); + } + else + { + A_NETBUF_FREE(skb); + } + } + + if (status != A_ECANCELED) { + /* + * HTC provides A_ECANCELED status when it doesn't want to be refilled + * (probably due to a shutdown) + */ + ar6000_rx_refill(Context, ept); + } + + +} + +static void +ar6000_rx_refill(void *Context, HTC_ENDPOINT_ID Endpoint) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)Context; + void *osBuf; + int RxBuffers; + int buffersToRefill; + HTC_PACKET *pPacket; + WMI_PRI_STREAM_ID streamId = arEndpoint2WMIStreamID(ar,Endpoint); + + buffersToRefill = (int)AR6000_MAX_RX_BUFFERS - + (int)ar->arRxBuffers[streamId]; + + if (buffersToRefill <= 0) { + /* fast return, nothing to fill */ + return; + } + + AR_DEBUG2_PRINTF("ar6000_rx_refill: providing htc with %d buffers at eid=%d\n", + buffersToRefill, Endpoint); + + for (RxBuffers = 0; RxBuffers < buffersToRefill; RxBuffers++) { + osBuf = A_NETBUF_ALLOC(AR6000_BUFFER_SIZE); + if (NULL == osBuf) { + break; + } + /* the HTC packet wrapper is at the head of the reserved area + * in the skb */ + pPacket = (HTC_PACKET *)(A_NETBUF_HEAD(osBuf)); + /* set re-fill info */ + SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),AR6000_BUFFER_SIZE,Endpoint); + /* add this packet */ + HTCAddReceivePkt(ar->arHtcTarget, pPacket); + } + + /* update count */ + AR6000_SPIN_LOCK(&ar->arLock, 0); + ar->arRxBuffers[streamId] += RxBuffers; + AR6000_SPIN_UNLOCK(&ar->arLock, 0); +} + +static struct net_device_stats * +ar6000_get_stats(struct net_device *dev) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + return &ar->arNetStats; +} + +static struct iw_statistics * +ar6000_get_iwstats(struct net_device * dev) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + TARGET_STATS *pStats = &ar->arTargetStats; + struct iw_statistics * pIwStats = &ar->arIwStats; + + if ((ar->arWmiReady == FALSE) + /* + * The in_atomic function is used to determine if the scheduling is + * allowed in the current context or not. This was introduced in 2.6 + * From what I have read on the differences between 2.4 and 2.6, the + * 2.4 kernel did not support preemption and so this check might not + * be required for 2.4 kernels. + */ +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) + || (in_atomic()) +#endif + ) + { + pIwStats->status = 0; + pIwStats->qual.qual = 0; + pIwStats->qual.level =0; + pIwStats->qual.noise = 0; + pIwStats->discard.code =0; + pIwStats->discard.retries=0; + pIwStats->miss.beacon =0; + return pIwStats; + } + if (down_interruptible(&ar->arSem)) { + pIwStats->status = 0; + return pIwStats; + } + + + ar->statsUpdatePending = TRUE; + + if(wmi_get_stats_cmd(ar->arWmi) != A_OK) { + up(&ar->arSem); + pIwStats->status = 0; + return pIwStats; + } + + wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == FALSE, wmitimeout * HZ); + + if (signal_pending(current)) { + AR_DEBUG_PRINTF("ar6000 : WMI get stats timeout \n"); + up(&ar->arSem); + pIwStats->status = 0; + return pIwStats; + } + pIwStats->status = 1 ; + pIwStats->qual.qual = pStats->cs_aveBeacon_rssi; + pIwStats->qual.level =pStats->cs_aveBeacon_rssi + 161; /* noise is -95 dBm */ + pIwStats->qual.noise = pStats->noise_floor_calibation; + pIwStats->discard.code = pStats->rx_decrypt_err; + pIwStats->discard.retries = pStats->tx_retry_cnt; + pIwStats->miss.beacon = pStats->cs_bmiss_cnt; + up(&ar->arSem); + return pIwStats; +} + +void +ar6000_ready_event(void *devt, A_UINT8 *datap, A_UINT8 phyCap) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; + struct net_device *dev = ar->arNetDev; + + ar->arWmiReady = TRUE; + wake_up(&arEvent); + A_MEMCPY(dev->dev_addr, datap, AR6000_ETH_ADDR_LEN); + AR_DEBUG_PRINTF("mac address = %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n", + dev->dev_addr[0], dev->dev_addr[1], + dev->dev_addr[2], dev->dev_addr[3], + dev->dev_addr[4], dev->dev_addr[5]); + + ar->arPhyCapability = phyCap; +} + +A_UINT8 +ar6000_iptos_to_userPriority(A_UINT8 *pkt) +{ + struct iphdr *ipHdr = (struct iphdr *)pkt; + A_UINT8 userPriority; + + /* + * IP Tos format : + * (Refer Pg 57 WMM-test-plan-v1.2) + * IP-TOS - 8bits + * : DSCP(6-bits) ECN(2-bits) + * : DSCP - P2 P1 P0 X X X + * where (P2 P1 P0) form 802.1D + */ + userPriority = ipHdr->tos >> 5; + return (userPriority & 0x7); +} + +void +ar6000_connect_event(AR_SOFTC_T *ar, A_UINT16 channel, A_UINT8 *bssid, + A_UINT16 listenInterval, A_UINT16 beaconInterval, + NETWORK_TYPE networkType, A_UINT8 beaconIeLen, + A_UINT8 assocReqLen, A_UINT8 assocRespLen, + A_UINT8 *assocInfo) +{ + union iwreq_data wrqu; + int i, beacon_ie_pos, assoc_resp_ie_pos, assoc_req_ie_pos; + static const char *tag1 = "ASSOCINFO(ReqIEs="; + static const char *tag2 = "ASSOCRESPIE="; + static const char *beaconIetag = "BEACONIE="; + char buf[WMI_CONTROL_MSG_MAX_LEN * 2 + sizeof(tag1)]; + char *pos; + A_UINT8 key_op_ctrl; + + A_MEMCPY(ar->arBssid, bssid, sizeof(ar->arBssid)); + ar->arBssChannel = channel; + + A_PRINTF("AR6000 connected event on freq %d ", channel); + A_PRINTF("with bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x " + " listenInterval=%d, beaconInterval = %d, beaconIeLen = %d assocReqLen=%d" + " assocRespLen =%d\n", + bssid[0], bssid[1], bssid[2], + bssid[3], bssid[4], bssid[5], + listenInterval, beaconInterval, + beaconIeLen, assocReqLen, assocRespLen); + if (networkType & ADHOC_NETWORK) { + if (networkType & ADHOC_CREATOR) { + A_PRINTF("Network: Adhoc (Creator)\n"); + } else { + A_PRINTF("Network: Adhoc (Joiner)\n"); + } + } else { + A_PRINTF("Network: Infrastructure\n"); + } + + if (beaconIeLen && (sizeof(buf) > (9 + beaconIeLen * 2))) { + AR_DEBUG_PRINTF("\nBeaconIEs= "); + + beacon_ie_pos = 0; + A_MEMZERO(buf, sizeof(buf)); + sprintf(buf, "%s", beaconIetag); + pos = buf + 9; + for (i = beacon_ie_pos; i < beacon_ie_pos + beaconIeLen; i++) { + AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]); + sprintf(pos, "%2.2x", assocInfo[i]); + pos += 2; + } + AR_DEBUG_PRINTF("\n"); + + A_MEMZERO(&wrqu, sizeof(wrqu)); + wrqu.data.length = strlen(buf); + wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); + } + + if (assocRespLen && (sizeof(buf) > (12 + (assocRespLen * 2)))) + { + assoc_resp_ie_pos = beaconIeLen + assocReqLen + + sizeof(A_UINT16) + /* capinfo*/ + sizeof(A_UINT16) + /* status Code */ + sizeof(A_UINT16) ; /* associd */ + A_MEMZERO(buf, sizeof(buf)); + sprintf(buf, "%s", tag2); + pos = buf + 12; + AR_DEBUG_PRINTF("\nAssocRespIEs= "); + /* + * The Association Response Frame w.o. the WLAN header is delivered to + * the host, so skip over to the IEs + */ + for (i = assoc_resp_ie_pos; i < assoc_resp_ie_pos + assocRespLen - 6; i++) + { + AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]); + sprintf(pos, "%2.2x", assocInfo[i]); + pos += 2; + } + AR_DEBUG_PRINTF("\n"); + + A_MEMZERO(&wrqu, sizeof(wrqu)); + wrqu.data.length = strlen(buf); + wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); + } + + if (assocReqLen && (sizeof(buf) > (17 + (assocReqLen * 2)))) { + /* + * assoc Request includes capability and listen interval. Skip these. + */ + assoc_req_ie_pos = beaconIeLen + + sizeof(A_UINT16) + /* capinfo*/ + sizeof(A_UINT16); /* listen interval */ + + A_MEMZERO(buf, sizeof(buf)); + sprintf(buf, "%s", tag1); + pos = buf + 17; + AR_DEBUG_PRINTF("AssocReqIEs= "); + for (i = assoc_req_ie_pos; i < assoc_req_ie_pos + assocReqLen - 4; i++) { + AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]); + sprintf(pos, "%2.2x", assocInfo[i]); + pos += 2;; + } + AR_DEBUG_PRINTF("\n"); + + A_MEMZERO(&wrqu, sizeof(wrqu)); + wrqu.data.length = strlen(buf); + wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); + } + +#ifdef USER_KEYS + if (ar->user_savedkeys_stat == USER_SAVEDKEYS_STAT_RUN && + ar->user_saved_keys.keyOk == TRUE) + { + + key_op_ctrl = KEY_OP_VALID_MASK & ~KEY_OP_INIT_TSC; + if (ar->user_key_ctrl & AR6000_USER_SETKEYS_RSC_UNCHANGED) { + key_op_ctrl &= ~KEY_OP_INIT_RSC; + } else { + key_op_ctrl |= KEY_OP_INIT_RSC; + } + ar6000_reinstall_keys(ar, key_op_ctrl); + } +#endif /* USER_KEYS */ + + /* flush data queues */ + ar6000_TxDataCleanup(ar); + + netif_start_queue(ar->arNetDev); + + if ((OPEN_AUTH == ar->arDot11AuthMode) && + (NONE_AUTH == ar->arAuthMode) && + (WEP_CRYPT == ar->arPairwiseCrypto)) + { + if (!ar->arConnected) { + ar6000_install_static_wep_keys(ar); + } + } + + ar->arConnected = TRUE; + ar->arConnectPending = FALSE; + + reconnect_flag = 0; + + A_MEMZERO(&wrqu, sizeof(wrqu)); + A_MEMCPY(wrqu.addr.sa_data, bssid, IEEE80211_ADDR_LEN); + wrqu.addr.sa_family = ARPHRD_ETHER; + wireless_send_event(ar->arNetDev, SIOCGIWAP, &wrqu, NULL); + if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable) { + A_MEMZERO(ar->arNodeMap, sizeof(ar->arNodeMap)); + ar->arNodeNum = 0; + ar->arNexEpId = ENDPOINT_2; + } + +} + +void ar6000_set_numdataendpts(AR_SOFTC_T *ar, A_UINT32 num) +{ + A_ASSERT(num <= (HTC_MAILBOX_NUM_MAX - 1)); + ar->arNumDataEndPts = num; +} + +void +ar6000_disconnect_event(AR_SOFTC_T *ar, A_UINT8 reason, A_UINT8 *bssid, + A_UINT8 assocRespLen, A_UINT8 *assocInfo, A_UINT16 protocolReasonStatus) +{ + A_UINT8 i; + + A_PRINTF("AR6000 disconnected"); + if (bssid[0] || bssid[1] || bssid[2] || bssid[3] || bssid[4] || bssid[5]) { + A_PRINTF(" from %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", + bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5]); + } + A_PRINTF("\n"); + + AR_DEBUG_PRINTF("\nDisconnect Reason is %d", reason); + AR_DEBUG_PRINTF("\nProtocol Reason/Status Code is %d", protocolReasonStatus); + AR_DEBUG_PRINTF("\nAssocResp Frame = %s", + assocRespLen ? " " : "NULL"); + for (i = 0; i < assocRespLen; i++) { + if (!(i % 0x10)) { + AR_DEBUG_PRINTF("\n"); + } + AR_DEBUG_PRINTF("%2.2x ", assocInfo[i]); + } + AR_DEBUG_PRINTF("\n"); + /* + * If the event is due to disconnect cmd from the host, only they the target + * would stop trying to connect. Under any other condition, target would + * keep trying to connect. + * + */ + if( reason == DISCONNECT_CMD) + { + ar->arConnectPending = FALSE; + } else { + ar->arConnectPending = TRUE; + if (((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x11)) || + ((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x0) && (reconnect_flag == 1))) { + ar->arConnected = TRUE; + return; + } + } + ar->arConnected = FALSE; + + if( (reason != CSERV_DISCONNECT) || (reconnect_flag != 1) ) { + reconnect_flag = 0; + } + +#ifdef USER_KEYS + if (reason != CSERV_DISCONNECT) + { + ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT; + ar->user_key_ctrl = 0; + } +#endif /* USER_KEYS */ + + netif_stop_queue(ar->arNetDev); + A_MEMZERO(ar->arBssid, sizeof(ar->arBssid)); + ar->arBssChannel = 0; + ar->arBeaconInterval = 0; + + ar6000_TxDataCleanup(ar); +} + +void +ar6000_regDomain_event(AR_SOFTC_T *ar, A_UINT32 regCode) +{ + A_PRINTF("AR6000 Reg Code = 0x%x\n", regCode); + ar->arRegCode = regCode; +} + +void +ar6000_neighborReport_event(AR_SOFTC_T *ar, int numAps, WMI_NEIGHBOR_INFO *info) +{ + static const char *tag = "PRE-AUTH"; + char buf[128]; + union iwreq_data wrqu; + int i; + + AR_DEBUG_PRINTF("AR6000 Neighbor Report Event\n"); + for (i=0; i < numAps; info++, i++) { + AR_DEBUG_PRINTF("bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", + info->bssid[0], info->bssid[1], info->bssid[2], + info->bssid[3], info->bssid[4], info->bssid[5]); + if (info->bssFlags & WMI_PREAUTH_CAPABLE_BSS) { + AR_DEBUG_PRINTF("preauth-cap"); + } + if (info->bssFlags & WMI_PMKID_VALID_BSS) { + AR_DEBUG_PRINTF(" pmkid-valid\n"); + continue; /* we skip bss if the pmkid is already valid */ + } + AR_DEBUG_PRINTF("\n"); + snprintf(buf, sizeof(buf), "%s%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x", + tag, + info->bssid[0], info->bssid[1], info->bssid[2], + info->bssid[3], info->bssid[4], info->bssid[5], + i, info->bssFlags); + A_MEMZERO(&wrqu, sizeof(wrqu)); + wrqu.data.length = strlen(buf); + wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); + } +} + +void +ar6000_tkip_micerr_event(AR_SOFTC_T *ar, A_UINT8 keyid, A_BOOL ismcast) +{ + static const char *tag = "MLME-MICHAELMICFAILURE.indication"; + char buf[128]; + union iwreq_data wrqu; + + A_PRINTF("AR6000 TKIP MIC error received for keyid %d %scast\n", + keyid, ismcast ? "multi": "uni"); + snprintf(buf, sizeof(buf), "%s(keyid=%d %scat)", tag, keyid, + ismcast ? "multi" : "uni"); + memset(&wrqu, 0, sizeof(wrqu)); + wrqu.data.length = strlen(buf); + wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); +} + +void +ar6000_scanComplete_event(AR_SOFTC_T *ar, A_STATUS status) +{ + AR_DEBUG_PRINTF("AR6000 scan complete: %d\n", status); + + ar->scan_complete = 1; + wake_up_interruptible(&ar6000_scan_queue); +} + +void +ar6000_targetStats_event(AR_SOFTC_T *ar, WMI_TARGET_STATS *pTarget) +{ + TARGET_STATS *pStats = &ar->arTargetStats; + A_UINT8 ac; + + /*A_PRINTF("AR6000 updating target stats\n");*/ + pStats->tx_packets += pTarget->txrxStats.tx_stats.tx_packets; + pStats->tx_bytes += pTarget->txrxStats.tx_stats.tx_bytes; + pStats->tx_unicast_pkts += pTarget->txrxStats.tx_stats.tx_unicast_pkts; + pStats->tx_unicast_bytes += pTarget->txrxStats.tx_stats.tx_unicast_bytes; + pStats->tx_multicast_pkts += pTarget->txrxStats.tx_stats.tx_multicast_pkts; + pStats->tx_multicast_bytes += pTarget->txrxStats.tx_stats.tx_multicast_bytes; + pStats->tx_broadcast_pkts += pTarget->txrxStats.tx_stats.tx_broadcast_pkts; + pStats->tx_broadcast_bytes += pTarget->txrxStats.tx_stats.tx_broadcast_bytes; + pStats->tx_rts_success_cnt += pTarget->txrxStats.tx_stats.tx_rts_success_cnt; + for(ac = 0; ac < WMM_NUM_AC; ac++) + pStats->tx_packet_per_ac[ac] += pTarget->txrxStats.tx_stats.tx_packet_per_ac[ac]; + pStats->tx_errors += pTarget->txrxStats.tx_stats.tx_errors; + pStats->tx_failed_cnt += pTarget->txrxStats.tx_stats.tx_failed_cnt; + pStats->tx_retry_cnt += pTarget->txrxStats.tx_stats.tx_retry_cnt; + pStats->tx_rts_fail_cnt += pTarget->txrxStats.tx_stats.tx_rts_fail_cnt; + pStats->tx_unicast_rate = wmi_get_rate(pTarget->txrxStats.tx_stats.tx_unicast_rate); + + pStats->rx_packets += pTarget->txrxStats.rx_stats.rx_packets; + pStats->rx_bytes += pTarget->txrxStats.rx_stats.rx_bytes; + pStats->rx_unicast_pkts += pTarget->txrxStats.rx_stats.rx_unicast_pkts; + pStats->rx_unicast_bytes += pTarget->txrxStats.rx_stats.rx_unicast_bytes; + pStats->rx_multicast_pkts += pTarget->txrxStats.rx_stats.rx_multicast_pkts; + pStats->rx_multicast_bytes += pTarget->txrxStats.rx_stats.rx_multicast_bytes; + pStats->rx_broadcast_pkts += pTarget->txrxStats.rx_stats.rx_broadcast_pkts; + pStats->rx_broadcast_bytes += pTarget->txrxStats.rx_stats.rx_broadcast_bytes; + pStats->rx_fragment_pkt += pTarget->txrxStats.rx_stats.rx_fragment_pkt; + pStats->rx_errors += pTarget->txrxStats.rx_stats.rx_errors; + pStats->rx_crcerr += pTarget->txrxStats.rx_stats.rx_crcerr; + pStats->rx_key_cache_miss += pTarget->txrxStats.rx_stats.rx_key_cache_miss; + pStats->rx_decrypt_err += pTarget->txrxStats.rx_stats.rx_decrypt_err; + pStats->rx_duplicate_frames += pTarget->txrxStats.rx_stats.rx_duplicate_frames; + pStats->rx_unicast_rate = wmi_get_rate(pTarget->txrxStats.rx_stats.rx_unicast_rate); + + + pStats->tkip_local_mic_failure + += pTarget->txrxStats.tkipCcmpStats.tkip_local_mic_failure; + pStats->tkip_counter_measures_invoked + += pTarget->txrxStats.tkipCcmpStats.tkip_counter_measures_invoked; + pStats->tkip_replays += pTarget->txrxStats.tkipCcmpStats.tkip_replays; + pStats->tkip_format_errors += pTarget->txrxStats.tkipCcmpStats.tkip_format_errors; + pStats->ccmp_format_errors += pTarget->txrxStats.tkipCcmpStats.ccmp_format_errors; + pStats->ccmp_replays += pTarget->txrxStats.tkipCcmpStats.ccmp_replays; + + + pStats->power_save_failure_cnt += pTarget->pmStats.power_save_failure_cnt; + pStats->noise_floor_calibation = pTarget->noise_floor_calibation; + + pStats->cs_bmiss_cnt += pTarget->cservStats.cs_bmiss_cnt; + pStats->cs_lowRssi_cnt += pTarget->cservStats.cs_lowRssi_cnt; + pStats->cs_connect_cnt += pTarget->cservStats.cs_connect_cnt; + pStats->cs_disconnect_cnt += pTarget->cservStats.cs_disconnect_cnt; + pStats->cs_aveBeacon_snr = pTarget->cservStats.cs_aveBeacon_snr; + pStats->cs_aveBeacon_rssi = pTarget->cservStats.cs_aveBeacon_rssi; + pStats->cs_lastRoam_msec = pTarget->cservStats.cs_lastRoam_msec; + pStats->cs_snr = pTarget->cservStats.cs_snr; + pStats->cs_rssi = pTarget->cservStats.cs_rssi; + + pStats->lq_val = pTarget->lqVal; + + pStats->wow_num_pkts_dropped += pTarget->wowStats.wow_num_pkts_dropped; + pStats->wow_num_host_pkt_wakeups += pTarget->wowStats.wow_num_host_pkt_wakeups; + pStats->wow_num_host_event_wakeups += pTarget->wowStats.wow_num_host_event_wakeups; + pStats->wow_num_events_discarded += pTarget->wowStats.wow_num_events_discarded; + + ar->statsUpdatePending = FALSE; + wake_up(&arEvent); +} + +void +ar6000_rssiThreshold_event(AR_SOFTC_T *ar, WMI_RSSI_THRESHOLD_VAL newThreshold, A_INT16 rssi) +{ + USER_RSSI_THOLD userRssiThold; + + userRssiThold.tag = rssi_map[newThreshold].tag; + userRssiThold.rssi = rssi; + AR_DEBUG2_PRINTF("rssi Threshold range = %d tag = %d rssi = %d\n", newThreshold, userRssiThold.tag, rssi); +#ifdef SEND_EVENT_TO_APP + ar6000_send_event_to_app(ar, WMI_RSSI_THRESHOLD_EVENTID,(A_UINT8 *)&userRssiThold, sizeof(USER_RSSI_THOLD)); +#endif +} + + +void +ar6000_hbChallengeResp_event(AR_SOFTC_T *ar, A_UINT32 cookie, A_UINT32 source) +{ + if (source == APP_HB_CHALLENGE) { + /* Report it to the app in case it wants a positive acknowledgement */ +#ifdef SEND_EVENT_TO_APP + ar6000_send_event_to_app(ar, WMIX_HB_CHALLENGE_RESP_EVENTID, + (A_UINT8 *)&cookie, sizeof(cookie)); +#endif + } else { + /* This would ignore the replys that come in after their due time */ + if (cookie == ar->arHBChallengeResp.seqNum) { + ar->arHBChallengeResp.outstanding = FALSE; + } + } +} + + +void +ar6000_reportError_event(AR_SOFTC_T *ar, WMI_TARGET_ERROR_VAL errorVal) +{ + char *errString[] = { + [WMI_TARGET_PM_ERR_FAIL] "WMI_TARGET_PM_ERR_FAIL", + [WMI_TARGET_KEY_NOT_FOUND] "WMI_TARGET_KEY_NOT_FOUND", + [WMI_TARGET_DECRYPTION_ERR] "WMI_TARGET_DECRYPTION_ERR", + [WMI_TARGET_BMISS] "WMI_TARGET_BMISS", + [WMI_PSDISABLE_NODE_JOIN] "WMI_PSDISABLE_NODE_JOIN" + }; + + A_PRINTF("AR6000 Error on Target. Error = 0x%x\n", errorVal); + + /* One error is reported at a time, and errorval is a bitmask */ + if(errorVal & (errorVal - 1)) + return; + + A_PRINTF("AR6000 Error type = "); + switch(errorVal) + { + case WMI_TARGET_PM_ERR_FAIL: + case WMI_TARGET_KEY_NOT_FOUND: + case WMI_TARGET_DECRYPTION_ERR: + case WMI_TARGET_BMISS: + case WMI_PSDISABLE_NODE_JOIN: + A_PRINTF("%s\n", errString[errorVal]); + break; + default: + A_PRINTF("INVALID\n"); + break; + } + +} + + +void +ar6000_cac_event(AR_SOFTC_T *ar, A_UINT8 ac, A_UINT8 cacIndication, + A_UINT8 statusCode, A_UINT8 *tspecSuggestion) +{ + WMM_TSPEC_IE *tspecIe; + + /* + * This is the TSPEC IE suggestion from AP. + * Suggestion provided by AP under some error + * cases, could be helpful for the host app. + * Check documentation. + */ + tspecIe = (WMM_TSPEC_IE *)tspecSuggestion; + + /* + * What do we do, if we get TSPEC rejection? One thought + * that comes to mind is implictly delete the pstream... + */ + A_PRINTF("AR6000 CAC notification. " + "AC = %d, cacIndication = 0x%x, statusCode = 0x%x\n", + ac, cacIndication, statusCode); +} + +#define AR6000_PRINT_BSSID(_pBss) do { \ + A_PRINTF("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",\ + (_pBss)[0],(_pBss)[1],(_pBss)[2],(_pBss)[3],\ + (_pBss)[4],(_pBss)[5]); \ +} while(0) + +void +ar6000_roam_tbl_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_TBL *pTbl) +{ + A_UINT8 i; + + A_PRINTF("ROAM TABLE NO OF ENTRIES is %d ROAM MODE is %d\n", + pTbl->numEntries, pTbl->roamMode); + for (i= 0; i < pTbl->numEntries; i++) { + A_PRINTF("[%d]bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", i, + pTbl->bssRoamInfo[i].bssid[0], pTbl->bssRoamInfo[i].bssid[1], + pTbl->bssRoamInfo[i].bssid[2], + pTbl->bssRoamInfo[i].bssid[3], + pTbl->bssRoamInfo[i].bssid[4], + pTbl->bssRoamInfo[i].bssid[5]); + A_PRINTF("RSSI %d RSSIDT %d LAST RSSI %d UTIL %d ROAM_UTIL %d" + " BIAS %d\n", + pTbl->bssRoamInfo[i].rssi, + pTbl->bssRoamInfo[i].rssidt, + pTbl->bssRoamInfo[i].last_rssi, + pTbl->bssRoamInfo[i].util, + pTbl->bssRoamInfo[i].roam_util, + pTbl->bssRoamInfo[i].bias); + } +} + +void +ar6000_wow_list_event(struct ar6_softc *ar, A_UINT8 num_filters, WMI_GET_WOW_LIST_REPLY *wow_reply) +{ + A_UINT8 i,j; + + /*Each event now contains exactly one filter, see bug 26613*/ + A_PRINTF("WOW pattern %d of %d patterns\n", wow_reply->this_filter_num, wow_reply->num_filters); + A_PRINTF("wow mode = %s host mode = %s\n", + (wow_reply->wow_mode == 0? "disabled":"enabled"), + (wow_reply->host_mode == 1 ? "awake":"asleep")); + + + /*If there are no patterns, the reply will only contain generic + WoW information. Pattern information will exist only if there are + patterns present. Bug 26716*/ + + /* If this event contains pattern information, display it*/ + if (wow_reply->this_filter_num) { + i=0; + A_PRINTF("id=%d size=%d offset=%d\n", + wow_reply->wow_filters[i].wow_filter_id, + wow_reply->wow_filters[i].wow_filter_size, + wow_reply->wow_filters[i].wow_filter_offset); + A_PRINTF("wow pattern = "); + for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) { + A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_pattern[j]); + } + + A_PRINTF("\nwow mask = "); + for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) { + A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_mask[j]); + } + A_PRINTF("\n"); + } +} + +/* + * Report the Roaming related data collected on the target + */ +void +ar6000_display_roam_time(WMI_TARGET_ROAM_TIME *p) +{ + A_PRINTF("Disconnect Data : BSSID: "); + AR6000_PRINT_BSSID(p->disassoc_bssid); + A_PRINTF(" RSSI %d DISASSOC Time %d NO_TXRX_TIME %d\n", + p->disassoc_bss_rssi,p->disassoc_time, + p->no_txrx_time); + A_PRINTF("Connect Data: BSSID: "); + AR6000_PRINT_BSSID(p->assoc_bssid); + A_PRINTF(" RSSI %d ASSOC Time %d TXRX_TIME %d\n", + p->assoc_bss_rssi,p->assoc_time, + p->allow_txrx_time); + A_PRINTF("Last Data Tx Time (b4 Disassoc) %d "\ + "First Data Tx Time (after Assoc) %d\n", + p->last_data_txrx_time, p->first_data_txrx_time); +} + +void +ar6000_roam_data_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_DATA *p) +{ + switch (p->roamDataType) { + case ROAM_DATA_TIME: + ar6000_display_roam_time(&p->u.roamTime); + break; + default: + break; + } +} + +void +ar6000_bssInfo_event_rx(AR_SOFTC_T *ar, A_UINT8 *datap, int len) +{ + struct sk_buff *skb; + WMI_BSS_INFO_HDR *bih = (WMI_BSS_INFO_HDR *)datap; + + + if (!ar->arMgmtFilter) { + return; + } + if (((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_BEACON) && + (bih->frameType != BEACON_FTYPE)) || + ((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_PROBE_RESP) && + (bih->frameType != PROBERESP_FTYPE))) + { + return; + } + + if ((skb = A_NETBUF_ALLOC_RAW(len)) != NULL) { + + A_NETBUF_PUT(skb, len); + A_MEMCPY(A_NETBUF_DATA(skb), datap, len); + skb->dev = ar->arNetDev; + printk("MAC RAW...\n"); +// skb->mac.raw = A_NETBUF_DATA(skb); + skb->ip_summed = CHECKSUM_NONE; + skb->pkt_type = PACKET_OTHERHOST; + skb->protocol = __constant_htons(0x0019); + netif_rx(skb); + } +} + +A_UINT32 wmiSendCmdNum; + +A_STATUS +ar6000_control_tx(void *devt, void *osbuf, WMI_PRI_STREAM_ID streamID) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; + A_STATUS status = A_OK; + struct ar_cookie *cookie = NULL; + int i; + + /* take lock to protect ar6000_alloc_cookie() */ + AR6000_SPIN_LOCK(&ar->arLock, 0); + + do { + + AR_DEBUG2_PRINTF("ar_contrstatus = ol_tx: skb=0x%x, len=0x%x, sid=%d\n", + (A_UINT32)osbuf, A_NETBUF_LEN(osbuf), streamID); + + if ((streamID == WMI_CONTROL_PRI) && (ar->arWMIControlEpFull)) { + /* control endpoint is full, don't allocate resources, we + * are just going to drop this packet */ + cookie = NULL; + AR_DEBUG_PRINTF(" WMI Control EP full, dropping packet : 0x%X, len:%d \n", + (A_UINT32)osbuf, A_NETBUF_LEN(osbuf)); + } else { + cookie = ar6000_alloc_cookie(ar); + } + + if (cookie == NULL) { + status = A_NO_MEMORY; + break; + } + + if(logWmiRawMsgs) { + A_PRINTF("WMI cmd send, msgNo %d :", wmiSendCmdNum); + for(i = 0; i < a_netbuf_to_len(osbuf); i++) + A_PRINTF("%x ", ((A_UINT8 *)a_netbuf_to_data(osbuf))[i]); + A_PRINTF("\n"); + } + + wmiSendCmdNum++; + + } while (FALSE); + + if (cookie != NULL) { + /* got a structure to send it out on */ + ar->arTxPending[streamID]++; + + if (streamID != WMI_CONTROL_PRI) { + ar->arTotalTxDataPending++; + } + } + + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + + if (cookie != NULL) { + cookie->arc_bp[0] = (A_UINT32)osbuf; + cookie->arc_bp[1] = 0; + SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt, + cookie, + A_NETBUF_DATA(osbuf), + A_NETBUF_LEN(osbuf), + arWMIStream2EndpointID(ar,streamID), + AR6K_CONTROL_PKT_TAG); + /* this interface is asynchronous, if there is an error, cleanup will happen in the + * TX completion callback */ + HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt); + status = A_OK; + } + + return status; +} + +/* indicate tx activity or inactivity on a WMI stream */ +void ar6000_indicate_tx_activity(void *devt, A_UINT8 TrafficClass, A_BOOL Active) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; + WMI_PRI_STREAM_ID streamid; + + if (ar->arWmiEnabled) { + streamid = wmi_get_stream_id(ar->arWmi, TrafficClass); + } else { + /* for mbox ping testing, the traffic class is mapped directly as a stream ID, + * see handling of AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE in ioctl.c */ + streamid = (WMI_PRI_STREAM_ID)TrafficClass; + } + + /* notify HTC, this may cause credit distribution changes */ + + HTCIndicateActivityChange(ar->arHtcTarget, + arWMIStream2EndpointID(ar,streamid), + Active); + +} + +module_init(ar6000_init_module); +module_exit(ar6000_cleanup_module); + +/* Init cookie queue */ +static void +ar6000_cookie_init(AR_SOFTC_T *ar) +{ + A_UINT32 i; + + ar->arCookieList = NULL; + A_MEMZERO(s_ar_cookie_mem, sizeof(s_ar_cookie_mem)); + + for (i = 0; i < MAX_COOKIE_NUM; i++) { + ar6000_free_cookie(ar, &s_ar_cookie_mem[i]); + } +} + +/* cleanup cookie queue */ +static void +ar6000_cookie_cleanup(AR_SOFTC_T *ar) +{ + /* It is gone .... */ + ar->arCookieList = NULL; +} + +/* Init cookie queue */ +static void +ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie) +{ + /* Insert first */ + A_ASSERT(ar != NULL); + A_ASSERT(cookie != NULL); + cookie->arc_list_next = ar->arCookieList; + ar->arCookieList = cookie; +} + +/* cleanup cookie queue */ +static struct ar_cookie * +ar6000_alloc_cookie(AR_SOFTC_T *ar) +{ + struct ar_cookie *cookie; + + cookie = ar->arCookieList; + if(cookie != NULL) + { + ar->arCookieList = cookie->arc_list_next; + } + + return cookie; +} + +#ifdef SEND_EVENT_TO_APP +/* + * This function is used to send event which come from taget to + * the application. The buf which send to application is include + * the event ID and event content. + */ +#define EVENT_ID_LEN 2 +void ar6000_send_event_to_app(AR_SOFTC_T *ar, A_UINT16 eventId, + A_UINT8 *datap, int len) +{ + +#if (WIRELESS_EXT >= 15) + +/* note: IWEVCUSTOM only exists in wireless extensions after version 15 */ + + char *buf; + A_UINT16 size; + union iwreq_data wrqu; + + size = len + EVENT_ID_LEN; + + if (size > IW_CUSTOM_MAX) { + AR_DEBUG_PRINTF("WMI event ID : 0x%4.4X, len = %d too big for IWEVCUSTOM (max=%d) \n", + eventId, size, IW_CUSTOM_MAX); + return; + } + + buf = A_MALLOC_NOWAIT(size); + A_MEMZERO(buf, size); + A_MEMCPY(buf, &eventId, EVENT_ID_LEN); + A_MEMCPY(buf+EVENT_ID_LEN, datap, len); + + //AR_DEBUG_PRINTF("event ID = %d,len = %d\n",*(A_UINT16*)buf, size); + A_MEMZERO(&wrqu, sizeof(wrqu)); + wrqu.data.length = size; + wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf); + + A_FREE(buf); +#endif + + +} +#endif + + +void +ar6000_tx_retry_err_event(void *devt) +{ + AR_DEBUG2_PRINTF("Tx retries reach maximum!\n"); +} + +void +ar6000_snrThresholdEvent_rx(void *devt, WMI_SNR_THRESHOLD_VAL newThreshold, A_UINT8 snr) +{ + AR_DEBUG2_PRINTF("snr threshold range %d, snr %d\n", newThreshold, snr); +} + +void +ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL newThreshold, A_UINT8 lq) +{ + AR_DEBUG2_PRINTF("lq threshold range %d, lq %d\n", newThreshold, lq); +} + + + +A_UINT32 +a_copy_to_user(void *to, const void *from, A_UINT32 n) +{ + return(copy_to_user(to, from, n)); +} + +A_UINT32 +a_copy_from_user(void *to, const void *from, A_UINT32 n) +{ + return(copy_from_user(to, from, n)); +} + + +A_STATUS +ar6000_get_driver_cfg(struct net_device *dev, + A_UINT16 cfgParam, + void *result) +{ + + A_STATUS ret = 0; + + switch(cfgParam) + { + case AR6000_DRIVER_CFG_GET_WLANNODECACHING: + *((A_UINT32 *)result) = wlanNodeCaching; + break; + case AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS: + *((A_UINT32 *)result) = logWmiRawMsgs; + break; + default: + ret = EINVAL; + break; + } + + return ret; +} + +void +ar6000_keepalive_rx(void *devt, A_UINT8 configured) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; + + ar->arKeepaliveConfigured = configured; + wake_up(&arEvent); +} + +void +ar6000_pmkid_list_event(void *devt, A_UINT8 numPMKID, WMI_PMKID *pmkidList) +{ + A_UINT8 i, j; + + A_PRINTF("Number of Cached PMKIDs is %d\n", numPMKID); + + for (i = 0; i < numPMKID; i++) { + A_PRINTF("\nPMKID %d ", i); + for (j = 0; j < WMI_PMKID_LEN; j++) { + A_PRINTF("%2.2x", pmkidList->pmkid[j]); + } + pmkidList++; + } +} + +#ifdef USER_KEYS +static A_STATUS + +ar6000_reinstall_keys(AR_SOFTC_T *ar, A_UINT8 key_op_ctrl) +{ + A_STATUS status = A_OK; + struct ieee80211req_key *uik = &ar->user_saved_keys.ucast_ik; + struct ieee80211req_key *bik = &ar->user_saved_keys.bcast_ik; + CRYPTO_TYPE keyType = ar->user_saved_keys.keyType; + + if (IEEE80211_CIPHER_CCKM_KRK != uik->ik_type) { + if (NONE_CRYPT == keyType) { + goto _reinstall_keys_out; + } + + if (uik->ik_keylen) { + status = wmi_addKey_cmd(ar->arWmi, uik->ik_keyix, + ar->user_saved_keys.keyType, PAIRWISE_USAGE, + uik->ik_keylen, (A_UINT8 *)&uik->ik_keyrsc, + uik->ik_keydata, key_op_ctrl, SYNC_BEFORE_WMIFLAG); + } + + } else { + status = wmi_add_krk_cmd(ar->arWmi, uik->ik_keydata); + } + + if (IEEE80211_CIPHER_CCKM_KRK != bik->ik_type) { + if (NONE_CRYPT == keyType) { + goto _reinstall_keys_out; + } + + if (bik->ik_keylen) { + status = wmi_addKey_cmd(ar->arWmi, bik->ik_keyix, + ar->user_saved_keys.keyType, GROUP_USAGE, + bik->ik_keylen, (A_UINT8 *)&bik->ik_keyrsc, + bik->ik_keydata, key_op_ctrl, NO_SYNC_WMIFLAG); + } + } else { + status = wmi_add_krk_cmd(ar->arWmi, bik->ik_keydata); + } + +_reinstall_keys_out: + ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT; + ar->user_key_ctrl = 0; + + return status; +} +#endif /* USER_KEYS */ + + +void +ar6000_dset_open_req( + void *context, + A_UINT32 id, + A_UINT32 targHandle, + A_UINT32 targReplyFn, + A_UINT32 targReplyArg) +{ +} + +void +ar6000_dset_close( + void *context, + A_UINT32 access_cookie) +{ + return; +} + +void +ar6000_dset_data_req( + void *context, + A_UINT32 accessCookie, + A_UINT32 offset, + A_UINT32 length, + A_UINT32 targBuf, + A_UINT32 targReplyFn, + A_UINT32 targReplyArg) +{ +} diff --git a/drivers/ar6000/ar6000/ar6000_drv.h b/drivers/ar6000/ar6000/ar6000_drv.h new file mode 100644 index 00000000000..3230d328051 --- /dev/null +++ b/drivers/ar6000/ar6000/ar6000_drv.h @@ -0,0 +1,361 @@ +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifndef _AR6000_H_ +#define _AR6000_H_ + +#include <linux/version.h> + + +#include <generated/autoconf.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/skbuff.h> +#include <linux/if_ether.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <net/iw_handler.h> +#include <linux/if_arp.h> +#include <linux/ip.h> +#include <linux/semaphore.h> +#include <linux/wireless.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <asm/io.h> + +#include <a_config.h> +#include <athdefs.h> +#include "a_types.h" +#include "a_osapi.h" +#include "htc_api.h" +#include "wmi.h" +#include "a_drv.h" +#include "bmi.h" +#include <ieee80211.h> +#include <ieee80211_ioctl.h> +#include <wlan_api.h> +#include <wmi_api.h> +#include "gpio_api.h" +#include "gpio.h" +#include <host_version.h> +#include <linux/rtnetlink.h> +#include <linux/init.h> +#include <linux/moduleparam.h> +#include "AR6Khwreg.h" +#include "ar6000_api.h" +#ifdef CONFIG_HOST_TCMD_SUPPORT +#include <testcmd.h> +#endif + +#include "targaddrs.h" +#include "dbglog_api.h" +#include "ar6000_diag.h" +#include "common_drv.h" + +#ifndef __dev_put +#define __dev_put(dev) dev_put(dev) +#endif + +#ifdef USER_KEYS + +#define USER_SAVEDKEYS_STAT_INIT 0 +#define USER_SAVEDKEYS_STAT_RUN 1 + +// TODO this needs to move into the AR_SOFTC struct +struct USER_SAVEDKEYS { + struct ieee80211req_key ucast_ik; + struct ieee80211req_key bcast_ik; + CRYPTO_TYPE keyType; + A_BOOL keyOk; +}; +#endif + +#define DBG_INFO 0x00000001 +#define DBG_ERROR 0x00000002 +#define DBG_WARNING 0x00000004 +#define DBG_SDIO 0x00000008 +#define DBG_HIF 0x00000010 +#define DBG_HTC 0x00000020 +#define DBG_WMI 0x00000040 +#define DBG_WMI2 0x00000080 +#define DBG_DRIVER 0x00000100 + +#define DBG_DEFAULTS (DBG_ERROR|DBG_WARNING) + + +#ifdef DEBUG +#define AR_DEBUG_PRINTF(args...) if (debugdriver) A_PRINTF(args); +#define AR_DEBUG2_PRINTF(args...) if (debugdriver >= 2) A_PRINTF(args); +extern int debugdriver; +#else +#define AR_DEBUG_PRINTF(args...) +#define AR_DEBUG2_PRINTF(args...) +#endif + +A_STATUS ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data); +A_STATUS ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data); + +#ifdef __cplusplus +extern "C" { +#endif + +#define MAX_AR6000 1 +#define AR6000_MAX_RX_BUFFERS 16 +#define AR6000_BUFFER_SIZE 1664 +#define AR6000_TX_TIMEOUT 10 +#define AR6000_ETH_ADDR_LEN 6 +#define AR6000_MAX_ENDPOINTS 4 +#define MAX_NODE_NUM 15 +#define MAX_COOKIE_NUM 150 +#define AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT 1 +#define AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT 1 + +enum { + DRV_HB_CHALLENGE = 0, + APP_HB_CHALLENGE +}; + +/* HTC RAW streams */ +typedef enum _HTC_RAW_STREAM_ID { + HTC_RAW_STREAM_NOT_MAPPED = -1, + HTC_RAW_STREAM_0 = 0, + HTC_RAW_STREAM_1 = 1, + HTC_RAW_STREAM_2 = 2, + HTC_RAW_STREAM_3 = 3, + HTC_RAW_STREAM_NUM_MAX +} HTC_RAW_STREAM_ID; + +#define RAW_HTC_READ_BUFFERS_NUM 4 +#define RAW_HTC_WRITE_BUFFERS_NUM 4 + +typedef struct { + int currPtr; + int length; + unsigned char data[AR6000_BUFFER_SIZE]; + HTC_PACKET HTCPacket; +} raw_htc_buffer; + +#ifdef CONFIG_HOST_TCMD_SUPPORT +/* + * add TCMD_MODE besides wmi and bypasswmi + * in TCMD_MODE, only few TCMD releated wmi commands + * counld be hanlder + */ +enum { + AR6000_WMI_MODE = 0, + AR6000_BYPASS_MODE, + AR6000_TCMD_MODE, + AR6000_WLAN_MODE +}; +#endif /* CONFIG_HOST_TCMD_SUPPORT */ + +struct ar_wep_key { + A_UINT8 arKeyIndex; + A_UINT8 arKeyLen; + A_UINT8 arKey[64]; +} ; + +struct ar_node_mapping { + A_UINT8 macAddress[6]; + A_UINT8 epId; + A_UINT8 txPending; +}; + +struct ar_cookie { + A_UINT32 arc_bp[2]; /* Must be first field */ + HTC_PACKET HtcPkt; /* HTC packet wrapper */ + struct ar_cookie *arc_list_next; +}; + +struct ar_hb_chlng_resp { + A_TIMER timer; + A_UINT32 frequency; + A_UINT32 seqNum; + A_BOOL outstanding; + A_UINT8 missCnt; + A_UINT8 missThres; +}; + +typedef struct ar6_softc { + struct net_device *arNetDev; /* net_device pointer */ + void *arWmi; + int arTxPending[WMI_PRI_MAX_COUNT]; + int arTotalTxDataPending; + A_UINT8 arNumDataEndPts; + A_BOOL arWmiEnabled; + A_BOOL arWmiReady; + A_BOOL arConnected; + A_BOOL arRadioSwitch; + HTC_HANDLE arHtcTarget; + void *arHifDevice; + spinlock_t arLock; + struct semaphore arSem; + int arRxBuffers[WMI_PRI_MAX_COUNT]; + int arSsidLen; + u_char arSsid[32]; + A_UINT8 arNetworkType; + A_UINT8 arDot11AuthMode; + A_UINT8 arAuthMode; + A_UINT8 arPairwiseCrypto; + A_UINT8 arPairwiseCryptoLen; + A_UINT8 arGroupCrypto; + A_UINT8 arGroupCryptoLen; + A_UINT8 arDefTxKeyIndex; + struct ar_wep_key arWepKeyList[WMI_MAX_KEY_INDEX + 1]; + A_UINT8 arBssid[6]; + A_UINT8 arReqBssid[6]; + A_UINT16 arChannelHint; + A_UINT16 arBssChannel; + A_UINT16 arListenInterval; + struct ar6000_version arVersion; + A_UINT32 arTargetType; + A_INT8 arRssi; + A_UINT8 arTxPwr; + A_BOOL arTxPwrSet; + A_INT32 arBitRate; + struct net_device_stats arNetStats; + struct iw_statistics arIwStats; + A_INT8 arNumChannels; + A_UINT16 arChannelList[32]; + A_UINT32 arRegCode; + A_BOOL statsUpdatePending; + TARGET_STATS arTargetStats; + A_INT8 arMaxRetries; + A_UINT8 arPhyCapability; +#ifdef CONFIG_HOST_TCMD_SUPPORT + A_UINT8 tcmdRxReport; + A_UINT32 tcmdRxTotalPkt; + A_INT32 tcmdRxRssi; + A_UINT32 tcmdPm; + A_UINT32 arTargetMode; +#endif + AR6000_WLAN_STATE arWlanState; + struct ar_node_mapping arNodeMap[MAX_NODE_NUM]; + A_UINT8 arIbssPsEnable; + A_UINT8 arNodeNum; + A_UINT8 arNexEpId; + struct ar_cookie *arCookieList; + A_UINT16 arRateMask; + A_UINT8 arSkipScan; + A_UINT16 arBeaconInterval; + A_BOOL arConnectPending; + A_BOOL arWmmEnabled; + struct ar_hb_chlng_resp arHBChallengeResp; + A_UINT8 arKeepaliveConfigured; + A_UINT32 arMgmtFilter; + HTC_ENDPOINT_ID arWmi2EpMapping[WMI_PRI_MAX_COUNT]; + WMI_PRI_STREAM_ID arEp2WmiMapping[ENDPOINT_MAX]; +#ifdef HTC_RAW_INTERFACE + HTC_ENDPOINT_ID arRaw2EpMapping[HTC_RAW_STREAM_NUM_MAX]; + HTC_RAW_STREAM_ID arEp2RawMapping[ENDPOINT_MAX]; + struct semaphore raw_htc_read_sem[HTC_RAW_STREAM_NUM_MAX]; + struct semaphore raw_htc_write_sem[HTC_RAW_STREAM_NUM_MAX]; + wait_queue_head_t raw_htc_read_queue[HTC_RAW_STREAM_NUM_MAX]; + wait_queue_head_t raw_htc_write_queue[HTC_RAW_STREAM_NUM_MAX]; + raw_htc_buffer *raw_htc_read_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_READ_BUFFERS_NUM]; + raw_htc_buffer *raw_htc_write_buffer[HTC_RAW_STREAM_NUM_MAX][RAW_HTC_WRITE_BUFFERS_NUM]; + A_BOOL write_buffer_available[HTC_RAW_STREAM_NUM_MAX]; + A_BOOL read_buffer_available[HTC_RAW_STREAM_NUM_MAX]; +#endif + A_BOOL arRawIfInit; + int arDeviceIndex; + COMMON_CREDIT_STATE_INFO arCreditStateInfo; + A_BOOL arWMIControlEpFull; + A_BOOL dbgLogFetchInProgress; + A_UCHAR log_buffer[DBGLOG_HOST_LOG_BUFFER_SIZE]; + A_UINT32 log_cnt; + A_UINT32 dbglog_init_done; + A_UINT32 arConnectCtrlFlags; + A_UINT32 scan_complete; +#ifdef USER_KEYS + A_INT32 user_savedkeys_stat; + A_UINT32 user_key_ctrl; + struct USER_SAVEDKEYS user_saved_keys; +#endif +} AR_SOFTC_T; + + +#define arWMIStream2EndpointID(ar,wmi) (ar)->arWmi2EpMapping[(wmi)] +#define arSetWMIStream2EndpointIDMap(ar,wmi,ep) \ +{ (ar)->arWmi2EpMapping[(wmi)] = (ep); \ + (ar)->arEp2WmiMapping[(ep)] = (wmi); } +#define arEndpoint2WMIStreamID(ar,ep) (ar)->arEp2WmiMapping[(ep)] + +#define arRawIfEnabled(ar) (ar)->arRawIfInit +#define arRawStream2EndpointID(ar,raw) (ar)->arRaw2EpMapping[(raw)] +#define arSetRawStream2EndpointIDMap(ar,raw,ep) \ +{ (ar)->arRaw2EpMapping[(raw)] = (ep); \ + (ar)->arEp2RawMapping[(ep)] = (raw); } +#define arEndpoint2RawStreamID(ar,ep) (ar)->arEp2RawMapping[(ep)] + +struct ar_giwscan_param { + char *current_ev; + char *end_buf; + A_BOOL firstPass; +}; + +#define AR6000_STAT_INC(ar, stat) (ar->arNetStats.stat++) + +#define AR6000_SPIN_LOCK(lock, param) do { \ + if (irqs_disabled()) { \ + AR_DEBUG_PRINTF("IRQs disabled:AR6000_LOCK\n"); \ + } \ + spin_lock_bh(lock); \ +} while (0) + +#define AR6000_SPIN_UNLOCK(lock, param) do { \ + if (irqs_disabled()) { \ + AR_DEBUG_PRINTF("IRQs disabled: AR6000_UNLOCK\n"); \ + } \ + spin_unlock_bh(lock); \ +} while (0) + +int ar6000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +int ar6000_ioctl_dispatcher(struct net_device *dev, struct ifreq *rq, int cmd); +void ar6000_ioctl_iwsetup(struct iw_handler_def *def); +void ar6000_gpio_init(void); +void ar6000_init_profile_info(AR_SOFTC_T *ar); +void ar6000_install_static_wep_keys(AR_SOFTC_T *ar); +int ar6000_init(struct net_device *dev); +int ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar); +A_STATUS ar6000_SetHTCBlockSize(AR_SOFTC_T *ar); + +#ifdef HTC_RAW_INTERFACE + +#ifndef __user +#define __user +#endif + +int ar6000_htc_raw_open(AR_SOFTC_T *ar); +int ar6000_htc_raw_close(AR_SOFTC_T *ar); +ssize_t ar6000_htc_raw_read(AR_SOFTC_T *ar, + HTC_RAW_STREAM_ID StreamID, + char __user *buffer, size_t count); +ssize_t ar6000_htc_raw_write(AR_SOFTC_T *ar, + HTC_RAW_STREAM_ID StreamID, + char __user *buffer, size_t count); + +#endif /* HTC_RAW_INTERFACE */ + +#ifdef __cplusplus +} +#endif + +#endif /* _AR6000_H_ */ diff --git a/drivers/ar6000/ar6000/ar6000_raw_if.c b/drivers/ar6000/ar6000/ar6000_raw_if.c new file mode 100644 index 00000000000..4443bb26733 --- /dev/null +++ b/drivers/ar6000/ar6000/ar6000_raw_if.c @@ -0,0 +1,440 @@ +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "ar6000_drv.h" + +#ifdef HTC_RAW_INTERFACE + +static void +ar6000_htc_raw_read_cb(void *Context, HTC_PACKET *pPacket) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)Context; + raw_htc_buffer *busy; + HTC_RAW_STREAM_ID streamID; + + busy = (raw_htc_buffer *)pPacket->pPktContext; + A_ASSERT(busy != NULL); + + if (pPacket->Status == A_ECANCELED) { + /* + * HTC provides A_ECANCELED status when it doesn't want to be refilled + * (probably due to a shutdown) + */ + return; + } + + streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint); + A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED); + +#ifdef CF + if (down_trylock(&ar->raw_htc_read_sem[streamID])) { +#else + if (down_interruptible(&ar->raw_htc_read_sem[streamID])) { +#endif /* CF */ + AR_DEBUG2_PRINTF("Unable to down the semaphore\n"); + } + + A_ASSERT((pPacket->Status != A_OK) || + (pPacket->pBuffer == (busy->data + HTC_HEADER_LEN))); + + busy->length = pPacket->ActualLength + HTC_HEADER_LEN; + busy->currPtr = HTC_HEADER_LEN; + ar->read_buffer_available[streamID] = TRUE; + //AR_DEBUG_PRINTF("raw read cb: 0x%X 0x%X \n", busy->currPtr,busy->length); + up(&ar->raw_htc_read_sem[streamID]); + + /* Signal the waiting process */ + AR_DEBUG2_PRINTF("Waking up the StreamID(%d) read process\n", streamID); + wake_up_interruptible(&ar->raw_htc_read_queue[streamID]); +} + +static void +ar6000_htc_raw_write_cb(void *Context, HTC_PACKET *pPacket) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)Context; + raw_htc_buffer *free; + HTC_RAW_STREAM_ID streamID; + + free = (raw_htc_buffer *)pPacket->pPktContext; + A_ASSERT(free != NULL); + + if (pPacket->Status == A_ECANCELED) { + /* + * HTC provides A_ECANCELED status when it doesn't want to be refilled + * (probably due to a shutdown) + */ + return; + } + + streamID = arEndpoint2RawStreamID(ar,pPacket->Endpoint); + A_ASSERT(streamID != HTC_RAW_STREAM_NOT_MAPPED); + +#ifdef CF + if (down_trylock(&ar->raw_htc_write_sem[streamID])) { +#else + if (down_interruptible(&ar->raw_htc_write_sem[streamID])) { +#endif + AR_DEBUG2_PRINTF("Unable to down the semaphore\n"); + } + + A_ASSERT(pPacket->pBuffer == (free->data + HTC_HEADER_LEN)); + + free->length = 0; + ar->write_buffer_available[streamID] = TRUE; + up(&ar->raw_htc_write_sem[streamID]); + + /* Signal the waiting process */ + AR_DEBUG2_PRINTF("Waking up the StreamID(%d) write process\n", streamID); + wake_up_interruptible(&ar->raw_htc_write_queue[streamID]); +} + +/* connect to a service */ +static A_STATUS ar6000_connect_raw_service(AR_SOFTC_T *ar, + HTC_RAW_STREAM_ID StreamID) +{ + A_STATUS status; + HTC_SERVICE_CONNECT_RESP response; + A_UINT8 streamNo; + HTC_SERVICE_CONNECT_REQ connect; + + do { + + A_MEMZERO(&connect,sizeof(connect)); + /* pass the stream ID as meta data to the RAW streams service */ + streamNo = (A_UINT8)StreamID; + connect.pMetaData = &streamNo; + connect.MetaDataLength = sizeof(A_UINT8); + /* these fields are the same for all endpoints */ + connect.EpCallbacks.pContext = ar; + connect.EpCallbacks.EpTxComplete = ar6000_htc_raw_write_cb; + connect.EpCallbacks.EpRecv = ar6000_htc_raw_read_cb; + /* simple interface, we don't need these optional callbacks */ + connect.EpCallbacks.EpRecvRefill = NULL; + connect.EpCallbacks.EpSendFull = NULL; + connect.EpCallbacks.EpSendAvail = NULL; + connect.MaxSendQueueDepth = RAW_HTC_WRITE_BUFFERS_NUM; + + /* connect to the raw streams service, we may be able to get 1 or more + * connections, depending on WHAT is running on the target */ + connect.ServiceID = HTC_RAW_STREAMS_SVC; + + A_MEMZERO(&response,sizeof(response)); + + /* try to connect to the raw stream, it is okay if this fails with + * status HTC_SERVICE_NO_MORE_EP */ + status = HTCConnectService(ar->arHtcTarget, + &connect, + &response); + + if (A_FAILED(status)) { + if (response.ConnectRespCode == HTC_SERVICE_NO_MORE_EP) { + AR_DEBUG_PRINTF("HTC RAW , No more streams allowed \n"); + status = A_OK; + } + break; + } + + /* set endpoint mapping for the RAW HTC streams */ + arSetRawStream2EndpointIDMap(ar,StreamID,response.Endpoint); + + AR_DEBUG_PRINTF("HTC RAW : stream ID: %d, endpoint: %d\n", + StreamID, arRawStream2EndpointID(ar,StreamID)); + + } while (FALSE); + + return status; +} + +int ar6000_htc_raw_open(AR_SOFTC_T *ar) +{ + A_STATUS status; + int streamID, endPt, count2; + raw_htc_buffer *buffer; + HTC_SERVICE_ID servicepriority; + + A_ASSERT(ar->arHtcTarget != NULL); + + /* wait for target */ + status = HTCWaitTarget(ar->arHtcTarget); + + if (A_FAILED(status)) { + AR_DEBUG_PRINTF("HTCWaitTarget failed (%d)\n", status); + return -ENODEV; + } + + for (endPt = 0; endPt < ENDPOINT_MAX; endPt++) { + ar->arEp2RawMapping[endPt] = HTC_RAW_STREAM_NOT_MAPPED; + } + + for (streamID = HTC_RAW_STREAM_0; streamID < HTC_RAW_STREAM_NUM_MAX; streamID++) { + /* Initialize the data structures */ + init_MUTEX(&ar->raw_htc_read_sem[streamID]); + init_MUTEX(&ar->raw_htc_write_sem[streamID]); + init_waitqueue_head(&ar->raw_htc_read_queue[streamID]); + init_waitqueue_head(&ar->raw_htc_write_queue[streamID]); + + /* try to connect to the raw service */ + status = ar6000_connect_raw_service(ar,streamID); + + if (A_FAILED(status)) { + break; + } + + if (arRawStream2EndpointID(ar,streamID) == 0) { + break; + } + + for (count2 = 0; count2 < RAW_HTC_READ_BUFFERS_NUM; count2 ++) { + /* Initialize the receive buffers */ + buffer = ar->raw_htc_write_buffer[streamID][count2]; + memset(buffer, 0, sizeof(raw_htc_buffer)); + buffer = ar->raw_htc_read_buffer[streamID][count2]; + memset(buffer, 0, sizeof(raw_htc_buffer)); + + SET_HTC_PACKET_INFO_RX_REFILL(&buffer->HTCPacket, + buffer, + buffer->data, + AR6000_BUFFER_SIZE, + arRawStream2EndpointID(ar,streamID)); + + /* Queue buffers to HTC for receive */ + if ((status = HTCAddReceivePkt(ar->arHtcTarget, &buffer->HTCPacket)) != A_OK) + { + BMIInit(); + return -EIO; + } + } + + for (count2 = 0; count2 < RAW_HTC_WRITE_BUFFERS_NUM; count2 ++) { + /* Initialize the receive buffers */ + buffer = ar->raw_htc_write_buffer[streamID][count2]; + memset(buffer, 0, sizeof(raw_htc_buffer)); + } + + ar->read_buffer_available[streamID] = FALSE; + ar->write_buffer_available[streamID] = TRUE; + } + + if (A_FAILED(status)) { + return -EIO; + } + + AR_DEBUG_PRINTF("HTC RAW, number of streams the target supports: %d \n", streamID); + + servicepriority = HTC_RAW_STREAMS_SVC; /* only 1 */ + + /* set callbacks and priority list */ + HTCSetCreditDistribution(ar->arHtcTarget, + ar, + NULL, /* use default */ + NULL, /* use default */ + &servicepriority, + 1); + + /* Start the HTC component */ + if ((status = HTCStart(ar->arHtcTarget)) != A_OK) { + BMIInit(); + return -EIO; + } + + (ar)->arRawIfInit = TRUE; + + return 0; +} + +int ar6000_htc_raw_close(AR_SOFTC_T *ar) +{ + A_PRINTF("ar6000_htc_raw_close called \n"); + HTCStop(ar->arHtcTarget); + + /* reset the device */ + ar6000_reset_device(ar->arHifDevice, ar->arTargetType); + /* Initialize the BMI component */ + BMIInit(); + + return 0; +} + +raw_htc_buffer * +get_filled_buffer(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID) +{ + int count; + raw_htc_buffer *busy; + + /* Check for data */ + for (count = 0; count < RAW_HTC_READ_BUFFERS_NUM; count ++) { + busy = ar->raw_htc_read_buffer[StreamID][count]; + if (busy->length) { + break; + } + } + if (busy->length) { + ar->read_buffer_available[StreamID] = TRUE; + } else { + ar->read_buffer_available[StreamID] = FALSE; + } + + return busy; +} + +ssize_t ar6000_htc_raw_read(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID, + char __user *buffer, size_t length) +{ + int readPtr; + raw_htc_buffer *busy; + + if (arRawStream2EndpointID(ar,StreamID) == 0) { + AR_DEBUG_PRINTF("StreamID(%d) not connected! \n", StreamID); + return -EFAULT; + } + + if (down_interruptible(&ar->raw_htc_read_sem[StreamID])) { + return -ERESTARTSYS; + } + + busy = get_filled_buffer(ar,StreamID); + while (!ar->read_buffer_available[StreamID]) { + up(&ar->raw_htc_read_sem[StreamID]); + + /* Wait for the data */ + AR_DEBUG2_PRINTF("Sleeping StreamID(%d) read process\n", StreamID); + if (wait_event_interruptible(ar->raw_htc_read_queue[StreamID], + ar->read_buffer_available[StreamID])) + { + return -EINTR; + } + if (down_interruptible(&ar->raw_htc_read_sem[StreamID])) { + return -ERESTARTSYS; + } + busy = get_filled_buffer(ar,StreamID); + } + + /* Read the data */ + readPtr = busy->currPtr; + if (length > busy->length - HTC_HEADER_LEN) { + length = busy->length - HTC_HEADER_LEN; + } + if (copy_to_user(buffer, &busy->data[readPtr], length)) { + up(&ar->raw_htc_read_sem[StreamID]); + return -EFAULT; + } + + busy->currPtr += length; + + //AR_DEBUG_PRINTF("raw read ioctl: currPTR : 0x%X 0x%X \n", busy->currPtr,busy->length); + + if (busy->currPtr == busy->length) + { + busy->currPtr = 0; + busy->length = 0; + HTC_PACKET_RESET_RX(&busy->HTCPacket); + //AR_DEBUG_PRINTF("raw read ioctl: ep for packet:%d \n", busy->HTCPacket.Endpoint); + HTCAddReceivePkt(ar->arHtcTarget, &busy->HTCPacket); + } + ar->read_buffer_available[StreamID] = FALSE; + up(&ar->raw_htc_read_sem[StreamID]); + + return length; +} + +static raw_htc_buffer * +get_free_buffer(AR_SOFTC_T *ar, HTC_ENDPOINT_ID StreamID) +{ + int count; + raw_htc_buffer *free; + + free = NULL; + for (count = 0; count < RAW_HTC_WRITE_BUFFERS_NUM; count ++) { + free = ar->raw_htc_write_buffer[StreamID][count]; + if (free->length == 0) { + break; + } + } + if (!free->length) { + ar->write_buffer_available[StreamID] = TRUE; + } else { + ar->write_buffer_available[StreamID] = FALSE; + } + + return free; +} + +ssize_t ar6000_htc_raw_write(AR_SOFTC_T *ar, HTC_RAW_STREAM_ID StreamID, + char __user *buffer, size_t length) +{ + int writePtr; + raw_htc_buffer *free; + + if (arRawStream2EndpointID(ar,StreamID) == 0) { + AR_DEBUG_PRINTF("StreamID(%d) not connected! \n", StreamID); + return -EFAULT; + } + + if (down_interruptible(&ar->raw_htc_write_sem[StreamID])) { + return -ERESTARTSYS; + } + + /* Search for a free buffer */ + free = get_free_buffer(ar,StreamID); + + /* Check if there is space to write else wait */ + while (!ar->write_buffer_available[StreamID]) { + up(&ar->raw_htc_write_sem[StreamID]); + + /* Wait for buffer to become free */ + AR_DEBUG2_PRINTF("Sleeping StreamID(%d) write process\n", StreamID); + if (wait_event_interruptible(ar->raw_htc_write_queue[StreamID], + ar->write_buffer_available[StreamID])) + { + return -EINTR; + } + if (down_interruptible(&ar->raw_htc_write_sem[StreamID])) { + return -ERESTARTSYS; + } + free = get_free_buffer(ar,StreamID); + } + + /* Send the data */ + writePtr = HTC_HEADER_LEN; + if (length > (AR6000_BUFFER_SIZE - HTC_HEADER_LEN)) { + length = AR6000_BUFFER_SIZE - HTC_HEADER_LEN; + } + + if (copy_from_user(&free->data[writePtr], buffer, length)) { + up(&ar->raw_htc_read_sem[StreamID]); + return -EFAULT; + } + + free->length = length; + + SET_HTC_PACKET_INFO_TX(&free->HTCPacket, + free, + &free->data[writePtr], + length, + arRawStream2EndpointID(ar,StreamID), + AR6K_DATA_PKT_TAG); + + HTCSendPkt(ar->arHtcTarget,&free->HTCPacket); + + ar->write_buffer_available[StreamID] = FALSE; + up(&ar->raw_htc_write_sem[StreamID]); + + return length; +} +#endif /* HTC_RAW_INTERFACE */ diff --git a/drivers/ar6000/ar6000/ar6xapi_linux.h b/drivers/ar6000/ar6000/ar6xapi_linux.h new file mode 100644 index 00000000000..b8e6e096165 --- /dev/null +++ b/drivers/ar6000/ar6000/ar6xapi_linux.h @@ -0,0 +1,128 @@ +#ifndef _AR6XAPI_LINUX_H +#define _AR6XAPI_LINUX_H +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifdef __cplusplus +extern "C" { +#endif + +struct ar6_softc; + +void ar6000_ready_event(void *devt, A_UINT8 *datap, A_UINT8 phyCap); +A_UINT8 ar6000_iptos_to_userPriority(A_UINT8 *pkt); +A_STATUS ar6000_control_tx(void *devt, void *osbuf, WMI_PRI_STREAM_ID streamID); +void ar6000_connect_event(struct ar6_softc *ar, A_UINT16 channel, + A_UINT8 *bssid, A_UINT16 listenInterval, + A_UINT16 beaconInterval, NETWORK_TYPE networkType, + A_UINT8 beaconIeLen, A_UINT8 assocReqLen, + A_UINT8 assocRespLen,A_UINT8 *assocInfo); +void ar6000_disconnect_event(struct ar6_softc *ar, A_UINT8 reason, + A_UINT8 *bssid, A_UINT8 assocRespLen, + A_UINT8 *assocInfo, A_UINT16 protocolReasonStatus); +void ar6000_tkip_micerr_event(struct ar6_softc *ar, A_UINT8 keyid, + A_BOOL ismcast); +void ar6000_bitrate_rx(void *devt, A_INT32 rateKbps); +void ar6000_channelList_rx(void *devt, A_INT8 numChan, A_UINT16 *chanList); +void ar6000_regDomain_event(struct ar6_softc *ar, A_UINT32 regCode); +void ar6000_txPwr_rx(void *devt, A_UINT8 txPwr); +void ar6000_keepalive_rx(void *devt, A_UINT8 configured); +void ar6000_neighborReport_event(struct ar6_softc *ar, int numAps, + WMI_NEIGHBOR_INFO *info); +void ar6000_set_numdataendpts(struct ar6_softc *ar, A_UINT32 num); +void ar6000_scanComplete_event(struct ar6_softc *ar, A_STATUS status); +void ar6000_targetStats_event(struct ar6_softc *ar, WMI_TARGET_STATS *pStats); +void ar6000_rssiThreshold_event(struct ar6_softc *ar, + WMI_RSSI_THRESHOLD_VAL newThreshold, + A_INT16 rssi); +void ar6000_reportError_event(struct ar6_softc *, WMI_TARGET_ERROR_VAL errorVal); +void ar6000_cac_event(struct ar6_softc *ar, A_UINT8 ac, A_UINT8 cac_indication, + A_UINT8 statusCode, A_UINT8 *tspecSuggestion); +void ar6000_hbChallengeResp_event(struct ar6_softc *, A_UINT32 cookie, A_UINT32 source); +void +ar6000_roam_tbl_event(struct ar6_softc *ar, WMI_TARGET_ROAM_TBL *pTbl); + +void +ar6000_roam_data_event(struct ar6_softc *ar, WMI_TARGET_ROAM_DATA *p); + +void +ar6000_wow_list_event(struct ar6_softc *ar, A_UINT8 num_filters, + WMI_GET_WOW_LIST_REPLY *wow_reply); + +void ar6000_pmkid_list_event(void *devt, A_UINT8 numPMKID, + WMI_PMKID *pmkidList); + +void ar6000_gpio_intr_rx(A_UINT32 intr_mask, A_UINT32 input_values); +void ar6000_gpio_data_rx(A_UINT32 reg_id, A_UINT32 value); +void ar6000_gpio_ack_rx(void); + +void ar6000_dbglog_init_done(struct ar6_softc *ar); + +#ifdef SEND_EVENT_TO_APP +void ar6000_send_event_to_app(struct ar6_softc *ar, A_UINT16 eventId, A_UINT8 *datap, int len); +#endif + +#ifdef CONFIG_HOST_TCMD_SUPPORT +void ar6000_tcmd_rx_report_event(void *devt, A_UINT8 * results, int len); +#endif + +void ar6000_tx_retry_err_event(void *devt); + +void ar6000_snrThresholdEvent_rx(void *devt, + WMI_SNR_THRESHOLD_VAL newThreshold, + A_UINT8 snr); + +void ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL range, A_UINT8 lqVal); + + +void ar6000_ratemask_rx(void *devt, A_UINT16 ratemask); + +A_STATUS ar6000_get_driver_cfg(struct net_device *dev, + A_UINT16 cfgParam, + void *result); +void ar6000_bssInfo_event_rx(struct ar6_softc *ar, A_UINT8 *data, int len); + +void ar6000_dbglog_event(struct ar6_softc *ar, A_UINT32 dropped, + A_INT8 *buffer, A_UINT32 length); + +int ar6000_dbglog_get_debug_logs(struct ar6_softc *ar); + +void ar6000_indicate_tx_activity(void *devt, A_UINT8 trafficClass, A_BOOL Active); + +void ar6000_dset_open_req(void *devt, + A_UINT32 id, + A_UINT32 targ_handle, + A_UINT32 targ_reply_fn, + A_UINT32 targ_reply_arg); +void ar6000_dset_close(void *devt, A_UINT32 access_cookie); +void ar6000_dset_data_req(void *devt, + A_UINT32 access_cookie, + A_UINT32 offset, + A_UINT32 length, + A_UINT32 targ_buf, + A_UINT32 targ_reply_fn, + A_UINT32 targ_reply_arg); + + + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/drivers/ar6000/ar6000/athdrv_linux.h b/drivers/ar6000/ar6000/athdrv_linux.h new file mode 100644 index 00000000000..9c3e449735f --- /dev/null +++ b/drivers/ar6000/ar6000/athdrv_linux.h @@ -0,0 +1,993 @@ +/* + * Copyright (c) 2004-2006 Atheros Communications Inc. + * All rights reserved. + * + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifndef _ATHDRV_LINUX_H +#define _ATHDRV_LINUX_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/* + * There are two types of ioctl's here: Standard ioctls and + * eXtended ioctls. All extended ioctls (XIOCTL) are multiplexed + * off of the single ioctl command, AR6000_IOCTL_EXTENDED. The + * arguments for every XIOCTL starts with a 32-bit command word + * that is used to select which extended ioctl is in use. After + * the command word are command-specific arguments. + */ + +/* Linux standard Wireless Extensions, private ioctl interfaces */ +#define IEEE80211_IOCTL_SETPARAM (SIOCIWFIRSTPRIV+0) +#define IEEE80211_IOCTL_GETPARAM (SIOCIWFIRSTPRIV+1) +#define IEEE80211_IOCTL_SETKEY (SIOCIWFIRSTPRIV+2) +#define IEEE80211_IOCTL_SETWMMPARAMS (SIOCIWFIRSTPRIV+3) +#define IEEE80211_IOCTL_DELKEY (SIOCIWFIRSTPRIV+4) +#define IEEE80211_IOCTL_GETWMMPARAMS (SIOCIWFIRSTPRIV+5) +#define IEEE80211_IOCTL_SETOPTIE (SIOCIWFIRSTPRIV+6) +#define IEEE80211_IOCTL_SETMLME (SIOCIWFIRSTPRIV+7) +//#define IEEE80211_IOCTL_GETOPTIE (SIOCIWFIRSTPRIV+7) +#define IEEE80211_IOCTL_ADDPMKID (SIOCIWFIRSTPRIV+8) +//#define IEEE80211_IOCTL_SETAUTHALG (SIOCIWFIRSTPRIV+10) +#define IEEE80211_IOCTL_LASTONE (SIOCIWFIRSTPRIV+9) + + + +/* ====WMI Ioctls==== */ +/* + * + * Many ioctls simply provide WMI services to application code: + * an application makes such an ioctl call with a set of arguments + * that are packaged into the corresponding WMI message, and sent + * to the Target. + */ + +#define AR6000_IOCTL_WMI_GETREV (SIOCIWFIRSTPRIV+10) +/* + * arguments: + * ar6000_version *revision + */ + +#define AR6000_IOCTL_WMI_SETPWR (SIOCIWFIRSTPRIV+11) +/* + * arguments: + * WMI_POWER_MODE_CMD pwrModeCmd (see include/wmi.h) + * uses: WMI_SET_POWER_MODE_CMDID + */ + +#define AR6000_IOCTL_WMI_SETSCAN (SIOCIWFIRSTPRIV+12) +/* + * arguments: + * WMI_SCAN_PARAMS_CMD scanParams (see include/wmi.h) + * uses: WMI_SET_SCAN_PARAMS_CMDID + */ + +#define AR6000_IOCTL_WMI_SETLISTENINT (SIOCIWFIRSTPRIV+13) +/* + * arguments: + * UINT32 listenInterval + * uses: WMI_SET_LISTEN_INT_CMDID + */ + +#define AR6000_IOCTL_WMI_SETBSSFILTER (SIOCIWFIRSTPRIV+14) +/* + * arguments: + * WMI_BSS_FILTER filter (see include/wmi.h) + * uses: WMI_SET_BSS_FILTER_CMDID + */ + +#define AR6000_IOCTL_WMI_SET_CHANNELPARAMS (SIOCIWFIRSTPRIV+16) +/* + * arguments: + * WMI_CHANNEL_PARAMS_CMD chParams + * uses: WMI_SET_CHANNEL_PARAMS_CMDID + */ + +#define AR6000_IOCTL_WMI_SET_PROBEDSSID (SIOCIWFIRSTPRIV+17) +/* + * arguments: + * WMI_PROBED_SSID_CMD probedSsids (see include/wmi.h) + * uses: WMI_SETPROBED_SSID_CMDID + */ + +#define AR6000_IOCTL_WMI_SET_PMPARAMS (SIOCIWFIRSTPRIV+18) +/* + * arguments: + * WMI_POWER_PARAMS_CMD powerParams (see include/wmi.h) + * uses: WMI_SET_POWER_PARAMS_CMDID + */ + +#define AR6000_IOCTL_WMI_SET_BADAP (SIOCIWFIRSTPRIV+19) +/* + * arguments: + * WMI_ADD_BAD_AP_CMD badAPs (see include/wmi.h) + * uses: WMI_ADD_BAD_AP_CMDID + */ + +#define AR6000_IOCTL_WMI_GET_QOS_QUEUE (SIOCIWFIRSTPRIV+20) +/* + * arguments: + * ar6000_queuereq queueRequest (see below) + */ + +#define AR6000_IOCTL_WMI_CREATE_QOS (SIOCIWFIRSTPRIV+21) +/* + * arguments: + * WMI_CREATE_PSTREAM createPstreamCmd (see include/wmi.h) + * uses: WMI_CREATE_PSTREAM_CMDID + */ + +#define AR6000_IOCTL_WMI_DELETE_QOS (SIOCIWFIRSTPRIV+22) +/* + * arguments: + * WMI_DELETE_PSTREAM_CMD deletePstreamCmd (see include/wmi.h) + * uses: WMI_DELETE_PSTREAM_CMDID + */ + +#define AR6000_IOCTL_WMI_SET_SNRTHRESHOLD (SIOCIWFIRSTPRIV+23) +/* + * arguments: + * WMI_SNR_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h) + * uses: WMI_SNR_THRESHOLD_PARAMS_CMDID + */ + +#define AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK (SIOCIWFIRSTPRIV+24) +/* + * arguments: + * WMI_TARGET_ERROR_REPORT_BITMASK errorReportBitMask (see include/wmi.h) + * uses: WMI_TARGET_ERROR_REPORT_BITMASK_CMDID + */ + +#define AR6000_IOCTL_WMI_GET_TARGET_STATS (SIOCIWFIRSTPRIV+25) +/* + * arguments: + * TARGET_STATS *targetStats (see below) + * uses: WMI_GET_STATISTICS_CMDID + */ + +#define AR6000_IOCTL_WMI_SET_ASSOC_INFO (SIOCIWFIRSTPRIV+26) +/* + * arguments: + * WMI_SET_ASSOC_INFO_CMD setAssocInfoCmd + * uses: WMI_SET_ASSOC_INFO_CMDID + */ + +#define AR6000_IOCTL_WMI_SET_ACCESS_PARAMS (SIOCIWFIRSTPRIV+27) +/* + * arguments: + * WMI_SET_ACCESS_PARAMS_CMD setAccessParams (see include/wmi.h) + * uses: WMI_SET_ACCESS_PARAMS_CMDID + */ + +#define AR6000_IOCTL_WMI_SET_BMISS_TIME (SIOCIWFIRSTPRIV+28) +/* + * arguments: + * UINT32 beaconMissTime + * uses: WMI_SET_BMISS_TIME_CMDID + */ + +#define AR6000_IOCTL_WMI_SET_DISC_TIMEOUT (SIOCIWFIRSTPRIV+29) +/* + * arguments: + * WMI_DISC_TIMEOUT_CMD disconnectTimeoutCmd (see include/wmi.h) + * uses: WMI_SET_DISC_TIMEOUT_CMDID + */ + +#define AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS (SIOCIWFIRSTPRIV+30) +/* + * arguments: + * WMI_IBSS_PM_CAPS_CMD ibssPowerMgmtCapsCmd + * uses: WMI_SET_IBSS_PM_CAPS_CMDID + */ + +/* + * There is a very small space available for driver-private + * wireless ioctls. In order to circumvent this limitation, + * we multiplex a bunch of ioctls (XIOCTLs) on top of a + * single AR6000_IOCTL_EXTENDED ioctl. + */ +#define AR6000_IOCTL_EXTENDED (SIOCIWFIRSTPRIV+31) + + +/* ====BMI Extended Ioctls==== */ + +#define AR6000_XIOCTL_BMI_DONE 1 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_BMI_DONE) + * uses: BMI_DONE + */ + +#define AR6000_XIOCTL_BMI_READ_MEMORY 2 +/* + * arguments: + * union { + * struct { + * UINT32 cmd (AR6000_XIOCTL_BMI_READ_MEMORY) + * UINT32 address + * UINT32 length + * } + * char results[length] + * } + * uses: BMI_READ_MEMORY + */ + +#define AR6000_XIOCTL_BMI_WRITE_MEMORY 3 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_MEMORY) + * UINT32 address + * UINT32 length + * char data[length] + * uses: BMI_WRITE_MEMORY + */ + +#define AR6000_XIOCTL_BMI_EXECUTE 4 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_BMI_EXECUTE) + * UINT32 TargetAddress + * UINT32 parameter + * uses: BMI_EXECUTE + */ + +#define AR6000_XIOCTL_BMI_SET_APP_START 5 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_BMI_SET_APP_START) + * UINT32 TargetAddress + * uses: BMI_SET_APP_START + */ + +#define AR6000_XIOCTL_BMI_READ_SOC_REGISTER 6 +/* + * arguments: + * union { + * struct { + * UINT32 cmd (AR6000_XIOCTL_BMI_READ_SOC_REGISTER) + * UINT32 TargetAddress, 32-bit aligned + * } + * UINT32 result + * } + * uses: BMI_READ_SOC_REGISTER + */ + +#define AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER 7 +/* + * arguments: + * struct { + * UINT32 cmd (AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER) + * UINT32 TargetAddress, 32-bit aligned + * UINT32 newValue + * } + * uses: BMI_WRITE_SOC_REGISTER + */ + +#define AR6000_XIOCTL_BMI_TEST 8 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_BMI_TEST) + * UINT32 address + * UINT32 length + * UINT32 count + */ + + + +/* Historical Host-side DataSet support */ +#define AR6000_XIOCTL_UNUSED9 9 +#define AR6000_XIOCTL_UNUSED10 10 +#define AR6000_XIOCTL_UNUSED11 11 + +/* ====Misc Extended Ioctls==== */ + +#define AR6000_XIOCTL_FORCE_TARGET_RESET 12 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_FORCE_TARGET_RESET) + */ + + +#ifdef HTC_RAW_INTERFACE +/* HTC Raw Interface Ioctls */ +#define AR6000_XIOCTL_HTC_RAW_OPEN 13 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_OPEN) + */ + +#define AR6000_XIOCTL_HTC_RAW_CLOSE 14 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_CLOSE) + */ + +#define AR6000_XIOCTL_HTC_RAW_READ 15 +/* + * arguments: + * union { + * struct { + * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_READ) + * UINT32 mailboxID + * UINT32 length + * } + * results[length] + * } + */ + +#define AR6000_XIOCTL_HTC_RAW_WRITE 16 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_HTC_RAW_WRITE) + * UINT32 mailboxID + * UINT32 length + * char buffer[length] + */ +#endif /* HTC_RAW_INTERFACE */ + +#define AR6000_XIOCTL_CHECK_TARGET_READY 17 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_CHECK_TARGET_READY) + */ + + + +/* ====GPIO (General Purpose I/O) Extended Ioctls==== */ + +#define AR6000_XIOCTL_GPIO_OUTPUT_SET 18 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_GPIO_OUTPUT_SET) + * ar6000_gpio_output_set_cmd_s (see below) + * uses: WMIX_GPIO_OUTPUT_SET_CMDID + */ + +#define AR6000_XIOCTL_GPIO_INPUT_GET 19 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_GPIO_INPUT_GET) + * uses: WMIX_GPIO_INPUT_GET_CMDID + */ + +#define AR6000_XIOCTL_GPIO_REGISTER_SET 20 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_SET) + * ar6000_gpio_register_cmd_s (see below) + * uses: WMIX_GPIO_REGISTER_SET_CMDID + */ + +#define AR6000_XIOCTL_GPIO_REGISTER_GET 21 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_GPIO_REGISTER_GET) + * ar6000_gpio_register_cmd_s (see below) + * uses: WMIX_GPIO_REGISTER_GET_CMDID + */ + +#define AR6000_XIOCTL_GPIO_INTR_ACK 22 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_ACK) + * ar6000_cpio_intr_ack_cmd_s (see below) + * uses: WMIX_GPIO_INTR_ACK_CMDID + */ + +#define AR6000_XIOCTL_GPIO_INTR_WAIT 23 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_GPIO_INTR_WAIT) + */ + + + +/* ====more wireless commands==== */ + +#define AR6000_XIOCTL_SET_ADHOC_BSSID 24 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BSSID) + * WMI_SET_ADHOC_BSSID_CMD setAdHocBssidCmd (see include/wmi.h) + */ + +#define AR6000_XIOCTL_SET_OPT_MODE 25 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_SET_OPT_MODE) + * WMI_SET_OPT_MODE_CMD setOptModeCmd (see include/wmi.h) + * uses: WMI_SET_OPT_MODE_CMDID + */ + +#define AR6000_XIOCTL_OPT_SEND_FRAME 26 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_OPT_SEND_FRAME) + * WMI_OPT_TX_FRAME_CMD optTxFrameCmd (see include/wmi.h) + * uses: WMI_OPT_TX_FRAME_CMDID + */ + +#define AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL 27 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL) + * WMI_BEACON_INT_CMD beaconIntCmd (see include/wmi.h) + * uses: WMI_SET_BEACON_INT_CMDID + */ + + +#define IEEE80211_IOCTL_SETAUTHALG 28 + + +#define AR6000_XIOCTL_SET_VOICE_PKT_SIZE 29 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_SET_VOICE_PKT_SIZE) + * WMI_SET_VOICE_PKT_SIZE_CMD setVoicePktSizeCmd (see include/wmi.h) + * uses: WMI_SET_VOICE_PKT_SIZE_CMDID + */ + + +#define AR6000_XIOCTL_SET_MAX_SP 30 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_SET_MAX_SP) + * WMI_SET_MAX_SP_LEN_CMD maxSPLen(see include/wmi.h) + * uses: WMI_SET_MAX_SP_LEN_CMDID + */ + +#define AR6000_XIOCTL_WMI_GET_ROAM_TBL 31 + +#define AR6000_XIOCTL_WMI_SET_ROAM_CTRL 32 + +#define AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS 33 + + +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS) + * WMI_SET_POWERSAVE_TIMERS_CMD powerSaveTimers(see include/wmi.h) + * WMI_SET_POWERSAVE_TIMERS_CMDID + */ + +#define AR6000_XIOCTRL_WMI_GET_POWER_MODE 34 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTRL_WMI_GET_POWER_MODE) + */ + +#define AR6000_XIOCTRL_WMI_SET_WLAN_STATE 35 +typedef enum { + WLAN_DISABLED, + WLAN_ENABLED +} AR6000_WLAN_STATE; +/* + * arguments: + * enable/disable + */ + +#define AR6000_XIOCTL_WMI_GET_ROAM_DATA 36 + +#define AR6000_XIOCTL_WMI_SETRETRYLIMITS 37 +/* + * arguments: + * WMI_SET_RETRY_LIMITS_CMD ibssSetRetryLimitsCmd + * uses: WMI_SET_RETRY_LIMITS_CMDID + */ + +#ifdef CONFIG_HOST_TCMD_SUPPORT +/* ====extended commands for radio test ==== */ + +#define AR6000_XIOCTL_TCMD_CONT_TX 38 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_TX) + * WMI_TCMD_CONT_TX_CMD contTxCmd (see include/wmi.h) + * uses: WMI_TCMD_CONT_TX_CMDID + */ + +#define AR6000_XIOCTL_TCMD_CONT_RX 39 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_TCMD_CONT_RX) + * WMI_TCMD_CONT_RX_CMD rxCmd (see include/wmi.h) + * uses: WMI_TCMD_CONT_RX_CMDID + */ + +#define AR6000_XIOCTL_TCMD_PM 40 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_TCMD_PM) + * WMI_TCMD_PM_CMD pmCmd (see include/wmi.h) + * uses: WMI_TCMD_PM_CMDID + */ + +#endif /* CONFIG_HOST_TCMD_SUPPORT */ + +#define AR6000_XIOCTL_WMI_STARTSCAN 41 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_WMI_STARTSCAN) + * UINT8 scanType + * UINT8 scanConnected + * A_BOOL forceFgScan + * uses: WMI_START_SCAN_CMDID + */ + +#define AR6000_XIOCTL_WMI_SETFIXRATES 42 + +#define AR6000_XIOCTL_WMI_GETFIXRATES 43 + + +#define AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD 44 +/* + * arguments: + * WMI_RSSI_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h) + * uses: WMI_RSSI_THRESHOLD_PARAMS_CMDID + */ + +#define AR6000_XIOCTL_WMI_CLR_RSSISNR 45 +/* + * arguments: + * WMI_CLR_RSSISNR_CMD thresholdParams (see include/wmi.h) + * uses: WMI_CLR_RSSISNR_CMDID + */ + +#define AR6000_XIOCTL_WMI_SET_LQTHRESHOLD 46 +/* + * arguments: + * WMI_LQ_THRESHOLD_PARAMS_CMD thresholdParams (see include/wmi.h) + * uses: WMI_LQ_THRESHOLD_PARAMS_CMDID + */ + +#define AR6000_XIOCTL_WMI_SET_RTS 47 +/* + * arguments: + * WMI_SET_RTS_MODE_CMD (see include/wmi.h) + * uses: WMI_SET_RTS_MODE_CMDID + */ + +#define AR6000_XIOCTL_WMI_SET_LPREAMBLE 48 + +#define AR6000_XIOCTL_WMI_SET_AUTHMODE 49 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_WMI_SET_AUTHMODE) + * UINT8 mode + * uses: WMI_SET_RECONNECT_AUTH_MODE_CMDID + */ + +#define AR6000_XIOCTL_WMI_SET_REASSOCMODE 50 + +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_WMI_SET_WMM) + * UINT8 mode + * uses: WMI_SET_WMM_CMDID + */ +#define AR6000_XIOCTL_WMI_SET_WMM 51 + +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS) + * UINT32 frequency + * UINT8 threshold + */ +#define AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS 52 + +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP) + * UINT32 cookie + */ +#define AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP 53 + +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_WMI_GET_RD) + * UINT32 regDomain + */ +#define AR6000_XIOCTL_WMI_GET_RD 54 + +#define AR6000_XIOCTL_DIAG_READ 55 + +#define AR6000_XIOCTL_DIAG_WRITE 56 + +/* + * arguments cmd (AR6000_XIOCTL_SET_TXOP) + * WMI_TXOP_CFG txopEnable + */ +#define AR6000_XIOCTL_WMI_SET_TXOP 57 + +#ifdef USER_KEYS +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_USER_SETKEYS) + * UINT32 keyOpCtrl + * uses AR6000_USER_SETKEYS_INFO + */ +#define AR6000_XIOCTL_USER_SETKEYS 58 +#endif /* USER_KEYS */ + +#define AR6000_XIOCTL_WMI_SET_KEEPALIVE 59 +/* + * arguments: + * UINT8 cmd (AR6000_XIOCTL_WMI_SET_KEEPALIVE) + * UINT8 keepaliveInterval + * uses: WMI_SET_KEEPALIVE_CMDID + */ + +#define AR6000_XIOCTL_WMI_GET_KEEPALIVE 60 +/* + * arguments: + * UINT8 cmd (AR6000_XIOCTL_WMI_GET_KEEPALIVE) + * UINT8 keepaliveInterval + * A_BOOL configured + * uses: WMI_GET_KEEPALIVE_CMDID + */ + +/* ====ROM Patching Extended Ioctls==== */ + +#define AR6000_XIOCTL_BMI_ROMPATCH_INSTALL 61 +/* + * arguments: + * union { + * struct { + * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_INSTALL) + * UINT32 ROM Address + * UINT32 RAM Address + * UINT32 number of bytes + * UINT32 activate? (0 or 1) + * } + * A_UINT32 resulting rompatch ID + * } + * uses: BMI_ROMPATCH_INSTALL + */ + +#define AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL 62 +/* + * arguments: + * struct { + * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL) + * UINT32 rompatch ID + * } + * uses: BMI_ROMPATCH_UNINSTALL + */ + +#define AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE 63 +/* + * arguments: + * struct { + * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE) + * UINT32 rompatch count + * UINT32 rompatch IDs[rompatch count] + * } + * uses: BMI_ROMPATCH_ACTIVATE + */ + +#define AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE 64 +/* + * arguments: + * struct { + * UINT32 cmd (AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE) + * UINT32 rompatch count + * UINT32 rompatch IDs[rompatch count] + * } + * uses: BMI_ROMPATCH_DEACTIVATE + */ + +#define AR6000_XIOCTL_WMI_SET_APPIE 65 +/* + * arguments: + * struct { + * UINT32 cmd (AR6000_XIOCTL_WMI_SET_APPIE) + * UINT32 app_frmtype; + * UINT32 app_buflen; + * UINT8 app_buf[]; + * } + */ +#define AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER 66 +/* + * arguments: + * A_UINT32 filter_type; + */ + +#define AR6000_XIOCTL_DBGLOG_CFG_MODULE 67 + +#define AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS 68 + +#define AR6000_XIOCTL_WMI_SET_WSC_STATUS 70 +/* + * arguments: + * A_UINT32 wsc_status; + * (WSC_REG_INACTIVE or WSC_REG_ACTIVE) + */ + +/* + * arguments: + * struct { + * A_UINT8 streamType; + * A_UINT8 status; + * } + * uses: WMI_SET_BT_STATUS_CMDID + */ +#define AR6000_XIOCTL_WMI_SET_BT_STATUS 71 + +/* + * arguments: + * struct { + * A_UINT8 paramType; + * union { + * A_UINT8 noSCOPkts; + * BT_PARAMS_A2DP a2dpParams; + * BT_COEX_REGS regs; + * }; + * } + * uses: WMI_SET_BT_PARAM_CMDID + */ +#define AR6000_XIOCTL_WMI_SET_BT_PARAMS 72 + +#define AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE 73 +#define AR6000_XIOCTL_WMI_SET_WOW_MODE 74 +#define AR6000_XIOCTL_WMI_GET_WOW_LIST 75 +#define AR6000_XIOCTL_WMI_ADD_WOW_PATTERN 76 +#define AR6000_XIOCTL_WMI_DEL_WOW_PATTERN 77 + + + +#define AR6000_XIOCTL_TARGET_INFO 78 +/* + * arguments: + * UINT32 cmd (AR6000_XIOCTL_TARGET_INFO) + * A_UINT32 TargetVersion (returned) + * A_UINT32 TargetType (returned) + * (See also bmi_msg.h target_ver and target_type) + */ + +#define AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE 79 +/* + * arguments: + * none + */ + +#define AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE 80 +/* + * This ioctl is used to emulate traffic activity + * timeouts. Activity/inactivity will trigger the driver + * to re-balance credits. + * + * arguments: + * ar6000_traffic_activity_change + */ + +#define AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS 81 +/* + * This ioctl is used to set the connect control flags + * + * arguments: + * A_UINT32 connectCtrlFlags + */ + +#define AR6000_XIOCTL_WMI_SET_AKMP_PARAMS 82 +/* + * This IOCTL sets any Authentication,Key Management and Protection + * related parameters. This is used along with the information set in + * Connect Command. + * Currently this enables Multiple PMKIDs to an AP. + * + * arguments: + * struct { + * A_UINT32 akmpInfo; + * } + * uses: WMI_SET_AKMP_PARAMS_CMD + */ + +#define AR6000_XIOCTL_WMI_GET_PMKID_LIST 83 + +#define AR6000_XIOCTL_WMI_SET_PMKID_LIST 84 +/* + * This IOCTL is used to set a list of PMKIDs. This list of + * PMKIDs is used in the [Re]AssocReq Frame. This list is used + * only if the MultiPMKID option is enabled via the + * AR6000_XIOCTL_WMI_SET_AKMP_PARAMS IOCTL. + * + * arguments: + * struct { + * A_UINT32 numPMKID; + * WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE]; + * } + * uses: WMI_SET_PMKIDLIST_CMD + */ + +/* Historical DSETPATCH support for INI patches */ +#define AR6000_XIOCTL_UNUSED90 90 + + + +/* used by AR6000_IOCTL_WMI_GETREV */ +struct ar6000_version { + A_UINT32 host_ver; + A_UINT32 target_ver; +}; + +/* used by AR6000_IOCTL_WMI_GET_QOS_QUEUE */ +struct ar6000_queuereq { + A_UINT8 trafficClass; + A_UINT16 activeTsids; +}; + +/* used by AR6000_IOCTL_WMI_GET_TARGET_STATS */ +typedef struct targetStats_t { + A_UINT64 tx_packets; + A_UINT64 tx_bytes; + A_UINT64 tx_unicast_pkts; + A_UINT64 tx_unicast_bytes; + A_UINT64 tx_multicast_pkts; + A_UINT64 tx_multicast_bytes; + A_UINT64 tx_broadcast_pkts; + A_UINT64 tx_broadcast_bytes; + A_UINT64 tx_rts_success_cnt; + A_UINT64 tx_packet_per_ac[4]; + + A_UINT64 tx_errors; + A_UINT64 tx_failed_cnt; + A_UINT64 tx_retry_cnt; + A_UINT64 tx_rts_fail_cnt; + A_INT32 tx_unicast_rate; + A_UINT64 rx_packets; + A_UINT64 rx_bytes; + A_UINT64 rx_unicast_pkts; + A_UINT64 rx_unicast_bytes; + A_UINT64 rx_multicast_pkts; + A_UINT64 rx_multicast_bytes; + A_UINT64 rx_broadcast_pkts; + A_UINT64 rx_broadcast_bytes; + A_UINT64 rx_fragment_pkt; + + A_UINT64 rx_errors; + A_UINT64 rx_crcerr; + A_UINT64 rx_key_cache_miss; + A_UINT64 rx_decrypt_err; + A_UINT64 rx_duplicate_frames; + A_INT32 rx_unicast_rate; + + A_UINT64 tkip_local_mic_failure; + A_UINT64 tkip_counter_measures_invoked; + A_UINT64 tkip_replays; + A_UINT64 tkip_format_errors; + A_UINT64 ccmp_format_errors; + A_UINT64 ccmp_replays; + + A_UINT64 power_save_failure_cnt; + A_INT16 noise_floor_calibation; + + A_UINT64 cs_bmiss_cnt; + A_UINT64 cs_lowRssi_cnt; + A_UINT64 cs_connect_cnt; + A_UINT64 cs_disconnect_cnt; + A_UINT8 cs_aveBeacon_snr; + A_INT16 cs_aveBeacon_rssi; + A_UINT8 cs_lastRoam_msec; + A_UINT8 cs_snr; + A_INT16 cs_rssi; + + A_UINT32 lq_val; + + A_UINT32 wow_num_pkts_dropped; + A_UINT8 wow_num_host_pkt_wakeups; + A_UINT8 wow_num_host_event_wakeups; + A_UINT16 wow_num_events_discarded; + +}TARGET_STATS; + +typedef struct targetStats_cmd_t { + TARGET_STATS targetStats; + int clearStats; +} TARGET_STATS_CMD; + +/* used by AR6000_XIOCTL_USER_SETKEYS */ + +/* + * Setting this bit to 1 doesnot initialize the RSC on the firmware + */ +#define AR6000_XIOCTL_USER_SETKEYS_RSC_CTRL 1 +#define AR6000_USER_SETKEYS_RSC_UNCHANGED 0x00000002 + +typedef struct { + A_UINT32 keyOpCtrl; /* Bit Map of Key Mgmt Ctrl Flags */ +} AR6000_USER_SETKEYS_INFO; + + +/* used by AR6000_XIOCTL_GPIO_OUTPUT_SET */ +struct ar6000_gpio_output_set_cmd_s { + A_UINT32 set_mask; + A_UINT32 clear_mask; + A_UINT32 enable_mask; + A_UINT32 disable_mask; +}; + +/* + * used by AR6000_XIOCTL_GPIO_REGISTER_GET and AR6000_XIOCTL_GPIO_REGISTER_SET + */ +struct ar6000_gpio_register_cmd_s { + A_UINT32 gpioreg_id; + A_UINT32 value; +}; + +/* used by AR6000_XIOCTL_GPIO_INTR_ACK */ +struct ar6000_gpio_intr_ack_cmd_s { + A_UINT32 ack_mask; +}; + +/* used by AR6000_XIOCTL_GPIO_INTR_WAIT */ +struct ar6000_gpio_intr_wait_cmd_s { + A_UINT32 intr_mask; + A_UINT32 input_values; +}; + +/* used by the AR6000_XIOCTL_DBGLOG_CFG_MODULE */ +typedef struct ar6000_dbglog_module_config_s { + A_UINT32 valid; + A_UINT16 mmask; + A_UINT16 tsr; + A_BOOL rep; + A_UINT16 size; +} DBGLOG_MODULE_CONFIG; + +typedef struct user_rssi_thold_t { + A_INT16 tag; + A_INT16 rssi; +} USER_RSSI_THOLD; + +typedef struct user_rssi_params_t { + A_UINT8 weight; + A_UINT32 pollTime; + USER_RSSI_THOLD tholds[12]; +} USER_RSSI_PARAMS; + +/* + * Host driver may have some config parameters. Typically, these + * config params are one time config parameters. These could + * correspond to any of the underlying modules. Host driver exposes + * an api for the underlying modules to get this config. + */ +#define AR6000_DRIVER_CFG_BASE 0x8000 + +/* Should driver perform wlan node caching? */ +#define AR6000_DRIVER_CFG_GET_WLANNODECACHING 0x8001 +/*Should we log raw WMI msgs */ +#define AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS 0x8002 + +/* used by AR6000_XIOCTL_DIAG_READ & AR6000_XIOCTL_DIAG_WRITE */ +struct ar6000_diag_window_cmd_s { + unsigned int addr; + unsigned int value; +}; + + +struct ar6000_traffic_activity_change { + A_UINT32 StreamID; /* stream ID to indicate activity change */ + A_UINT32 Active; /* active (1) or inactive (0) */ +}; + +#ifdef __cplusplus +} +#endif +#endif diff --git a/drivers/ar6000/ar6000/athtypes_linux.h b/drivers/ar6000/ar6000/athtypes_linux.h new file mode 100644 index 00000000000..3e91de331f4 --- /dev/null +++ b/drivers/ar6000/ar6000/athtypes_linux.h @@ -0,0 +1,47 @@ +/* + * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/athtypes_linux.h#1 $ + * + * This file contains the definitions of the basic atheros data types. + * It is used to map the data types in atheros files to a platform specific + * type. + * + * Copyright 2003-2005 Atheros Communications, Inc., All Rights Reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifndef _ATHTYPES_LINUX_H_ +#define _ATHTYPES_LINUX_H_ + +#ifdef __KERNEL__ +#include <linux/types.h> +#endif + +typedef int8_t A_INT8; +typedef int16_t A_INT16; +typedef int32_t A_INT32; +typedef int64_t A_INT64; + +typedef u_int8_t A_UINT8; +typedef u_int16_t A_UINT16; +typedef u_int32_t A_UINT32; +typedef u_int64_t A_UINT64; + +typedef int A_BOOL; +typedef char A_CHAR; +typedef unsigned char A_UCHAR; +typedef unsigned long A_ATH_TIMER; + + +#endif /* _ATHTYPES_LINUX_H_ */ diff --git a/drivers/ar6000/ar6000/config_linux.h b/drivers/ar6000/ar6000/config_linux.h new file mode 100644 index 00000000000..11a691d0c16 --- /dev/null +++ b/drivers/ar6000/ar6000/config_linux.h @@ -0,0 +1,44 @@ +/* + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifndef _CONFIG_LINUX_H_ +#define _CONFIG_LINUX_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Host-side GPIO support is optional. + * If run-time access to GPIO pins is not required, then + * this should be changed to #undef. + */ +#define CONFIG_HOST_GPIO_SUPPORT + +/* + * Host side Test Command support + */ +#define CONFIG_HOST_TCMD_SUPPORT + +#define USE_4BYTE_REGISTER_ACCESS + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/drivers/ar6000/ar6000/debug_linux.h b/drivers/ar6000/ar6000/debug_linux.h new file mode 100644 index 00000000000..c74e1df9f45 --- /dev/null +++ b/drivers/ar6000/ar6000/debug_linux.h @@ -0,0 +1,86 @@ +/* + * Copyright (c) 2004-2006 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifndef _DEBUG_LINUX_H_ +#define _DEBUG_LINUX_H_ + +#define DBG_DEFAULTS (DBG_ERROR|DBG_WARNING) + +extern A_UINT32 g_dbg_flags; + +#define DBGFMT "%s() : " +#define DBGARG __func__ +#define DBGFN A_PRINTF + +/* ------- Debug related stuff ------- */ +enum { + ATH_DEBUG_SEND = 0x0001, + ATH_DEBUG_RECV = 0x0002, + ATH_DEBUG_SYNC = 0x0004, + ATH_DEBUG_DUMP = 0x0008, + ATH_DEBUG_IRQ = 0x0010, + ATH_DEBUG_TRC = 0x0020, + ATH_DEBUG_WARN = 0x0040, + ATH_DEBUG_ERR = 0x0080, + ATH_LOG_INF = 0x0100, + ATH_DEBUG_BMI = 0x0110, + ATH_DEBUG_WMI = 0x0120, + ATH_DEBUG_HIF = 0x0140, + ATH_DEBUG_HTC = 0x0180, + ATH_DEBUG_WLAN = 0x1000, + ATH_LOG_ERR = 0x1010, + ATH_DEBUG_ANY = 0xFFFF, +}; + +#ifdef DEBUG + +#define A_DPRINTF(f, a) \ + if(g_dbg_flags & (f)) \ + { \ + DBGFN a ; \ + } + + +// TODO FIX usage of A_PRINTF! +#define AR_DEBUG_LVL_CHECK(lvl) (debughtc & (lvl)) +#define AR_DEBUG_PRINTBUF(buffer, length, desc) do { \ + if (debughtc & ATH_DEBUG_DUMP) { \ + DebugDumpBytes(buffer, length,desc); \ + } \ +} while(0) +#define PRINTX_ARG(arg...) arg +#define AR_DEBUG_PRINTF(flags, args) do { \ + if (debughtc & (flags)) { \ + A_PRINTF(KERN_ALERT PRINTX_ARG args); \ + } \ +} while (0) +#define AR_DEBUG_ASSERT(test) do { \ + if (!(test)) { \ + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Debug Assert Caught, File %s, Line: %d, Test:%s \n",__FILE__, __LINE__,#test)); \ + } \ +} while(0) +extern int debughtc; +#else +#define AR_DEBUG_PRINTF(flags, args) +#define AR_DEBUG_PRINTBUF(buffer, length, desc) +#define AR_DEBUG_ASSERT(test) +#define AR_DEBUG_LVL_CHECK(lvl) 0 +#define A_DPRINTF(f, a) +#endif + +#endif /* _DEBUG_LINUX_H_ */ diff --git a/drivers/ar6000/ar6000/ioctl.c b/drivers/ar6000/ar6000/ioctl.c new file mode 100644 index 00000000000..04aa911f323 --- /dev/null +++ b/drivers/ar6000/ar6000/ioctl.c @@ -0,0 +1,2532 @@ +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "ar6000_drv.h" + +static A_UINT8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; +static A_UINT8 null_mac[] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0}; +extern USER_RSSI_THOLD rssi_map[12]; +extern unsigned int wmitimeout; +extern A_WAITQUEUE_HEAD arEvent; +extern int tspecCompliance; +extern int bypasswmi; + +static int +ar6000_ioctl_get_roam_tbl(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if(wmi_get_roam_tbl_cmd(ar->arWmi) != A_OK) { + return -EIO; + } + + return 0; +} + +static int +ar6000_ioctl_get_roam_data(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + + /* currently assume only roam times are required */ + if(wmi_get_roam_data_cmd(ar->arWmi, ROAM_DATA_TIME) != A_OK) { + return -EIO; + } + + + return 0; +} + +static int +ar6000_ioctl_set_roam_ctrl(struct net_device *dev, char *userdata) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_SET_ROAM_CTRL_CMD cmd; + A_UINT8 size = sizeof(cmd); + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + + if (copy_from_user(&cmd, userdata, size)) { + return -EFAULT; + } + + if (cmd.roamCtrlType == WMI_SET_HOST_BIAS) { + if (cmd.info.bssBiasInfo.numBss > 1) { + size += (cmd.info.bssBiasInfo.numBss - 1) * sizeof(WMI_BSS_BIAS); + } + } + + if (copy_from_user(&cmd, userdata, size)) { + return -EFAULT; + } + + if(wmi_set_roam_ctrl_cmd(ar->arWmi, &cmd, size) != A_OK) { + return -EIO; + } + + return 0; +} + +static int +ar6000_ioctl_set_powersave_timers(struct net_device *dev, char *userdata) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_POWERSAVE_TIMERS_POLICY_CMD cmd; + A_UINT8 size = sizeof(cmd); + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (copy_from_user(&cmd, userdata, size)) { + return -EFAULT; + } + + if (copy_from_user(&cmd, userdata, size)) { + return -EFAULT; + } + + if(wmi_set_powersave_timers_cmd(ar->arWmi, &cmd, size) != A_OK) { + return -EIO; + } + + return 0; +} + +static int +ar6000_ioctl_set_wmm(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_SET_WMM_CMD cmd; + A_STATUS ret; + + if ((dev->flags & IFF_UP) != IFF_UP) { + return -EIO; + } + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (copy_from_user(&cmd, (char *)((unsigned int*)rq->ifr_data + 1), + sizeof(cmd))) + { + return -EFAULT; + } + + if (cmd.status == WMI_WMM_ENABLED) { + ar->arWmmEnabled = TRUE; + } else { + ar->arWmmEnabled = FALSE; + } + + ret = wmi_set_wmm_cmd(ar->arWmi, cmd.status); + + switch (ret) { + case A_OK: + return 0; + case A_EBUSY : + return -EBUSY; + case A_NO_MEMORY: + return -ENOMEM; + case A_EINVAL: + default: + return -EFAULT; + } +} + +static int +ar6000_ioctl_set_txop(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_SET_WMM_TXOP_CMD cmd; + A_STATUS ret; + + if ((dev->flags & IFF_UP) != IFF_UP) { + return -EIO; + } + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (copy_from_user(&cmd, (char *)((unsigned int*)rq->ifr_data + 1), + sizeof(cmd))) + { + return -EFAULT; + } + + ret = wmi_set_wmm_txop(ar->arWmi, cmd.txopEnable); + + switch (ret) { + case A_OK: + return 0; + case A_EBUSY : + return -EBUSY; + case A_NO_MEMORY: + return -ENOMEM; + case A_EINVAL: + default: + return -EFAULT; + } +} + +static int +ar6000_ioctl_get_rd(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + A_STATUS ret = 0; + + if ((dev->flags & IFF_UP) != IFF_UP || ar->arWmiReady == FALSE) { + return -EIO; + } + + if(copy_to_user((char *)((unsigned int*)rq->ifr_data + 1), + &ar->arRegCode, sizeof(ar->arRegCode))) + ret = -EFAULT; + + return ret; +} + + +/* Get power mode command */ +static int +ar6000_ioctl_get_power_mode(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_POWER_MODE_CMD power_mode; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + power_mode.powerMode = wmi_get_power_mode_cmd(ar->arWmi); + if (copy_to_user(rq->ifr_data, &power_mode, sizeof(WMI_POWER_MODE_CMD))) { + ret = -EFAULT; + } + + return ret; +} + + +static int +ar6000_ioctl_set_channelParams(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_CHANNEL_PARAMS_CMD cmd, *cmdp; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + + if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { + return -EFAULT; + } + + if (cmd.numChannels > 1) { + cmdp = A_MALLOC(130); + if (copy_from_user(cmdp, rq->ifr_data, + sizeof (*cmdp) + + ((cmd.numChannels - 1) * sizeof(A_UINT16)))) + { + kfree(cmdp); + return -EFAULT; + } + } else { + cmdp = &cmd; + } + + if ((ar->arPhyCapability == WMI_11G_CAPABILITY) && + ((cmdp->phyMode == WMI_11A_MODE) || (cmdp->phyMode == WMI_11AG_MODE))) + { + ret = -EINVAL; + } + + if (!ret && + (wmi_set_channelParams_cmd(ar->arWmi, cmdp->scanParam, cmdp->phyMode, + cmdp->numChannels, cmdp->channelList) + != A_OK)) + { + ret = -EIO; + } + + if (cmd.numChannels > 1) { + kfree(cmdp); + } + + return ret; +} + +static int +ar6000_ioctl_set_snr_threshold(struct net_device *dev, struct ifreq *rq) +{ + + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_SNR_THRESHOLD_PARAMS_CMD cmd; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { + return -EFAULT; + } + + if( wmi_set_snr_threshold_params(ar->arWmi, &cmd) != A_OK ) { + ret = -EIO; + } + + return ret; +} + +static int +ar6000_ioctl_set_rssi_threshold(struct net_device *dev, struct ifreq *rq) +{ +#define SWAP_THOLD(thold1, thold2) do { \ + USER_RSSI_THOLD tmpThold; \ + tmpThold.tag = thold1.tag; \ + tmpThold.rssi = thold1.rssi; \ + thold1.tag = thold2.tag; \ + thold1.rssi = thold2.rssi; \ + thold2.tag = tmpThold.tag; \ + thold2.rssi = tmpThold.rssi; \ +} while (0) + + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_RSSI_THRESHOLD_PARAMS_CMD cmd; + USER_RSSI_PARAMS rssiParams; + A_INT32 i, j; + + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (copy_from_user((char *)&rssiParams, (char *)((unsigned int *)rq->ifr_data + 1), sizeof(USER_RSSI_PARAMS))) { + return -EFAULT; + } + cmd.weight = rssiParams.weight; + cmd.pollTime = rssiParams.pollTime; + + A_MEMCPY(rssi_map, &rssiParams.tholds, sizeof(rssi_map)); + /* + * only 6 elements, so use bubble sorting, in ascending order + */ + for (i = 5; i > 0; i--) { + for (j = 0; j < i; j++) { /* above tholds */ + if (rssi_map[j+1].rssi < rssi_map[j].rssi) { + SWAP_THOLD(rssi_map[j+1], rssi_map[j]); + } else if (rssi_map[j+1].rssi == rssi_map[j].rssi) { + return EFAULT; + } + } + } + for (i = 11; i > 6; i--) { + for (j = 6; j < i; j++) { /* below tholds */ + if (rssi_map[j+1].rssi < rssi_map[j].rssi) { + SWAP_THOLD(rssi_map[j+1], rssi_map[j]); + } else if (rssi_map[j+1].rssi == rssi_map[j].rssi) { + return EFAULT; + } + } + } + +#ifdef DEBUG + for (i = 0; i < 12; i++) { + AR_DEBUG2_PRINTF("thold[%d].tag: %d, thold[%d].rssi: %d \n", + i, rssi_map[i].tag, i, rssi_map[i].rssi); + } +#endif + cmd.thresholdAbove1_Val = rssi_map[0].rssi; + cmd.thresholdAbove2_Val = rssi_map[1].rssi; + cmd.thresholdAbove3_Val = rssi_map[2].rssi; + cmd.thresholdAbove4_Val = rssi_map[3].rssi; + cmd.thresholdAbove5_Val = rssi_map[4].rssi; + cmd.thresholdAbove6_Val = rssi_map[5].rssi; + cmd.thresholdBelow1_Val = rssi_map[6].rssi; + cmd.thresholdBelow2_Val = rssi_map[7].rssi; + cmd.thresholdBelow3_Val = rssi_map[8].rssi; + cmd.thresholdBelow4_Val = rssi_map[9].rssi; + cmd.thresholdBelow5_Val = rssi_map[10].rssi; + cmd.thresholdBelow6_Val = rssi_map[11].rssi; + + if( wmi_set_rssi_threshold_params(ar->arWmi, &cmd) != A_OK ) { + ret = -EIO; + } + + return ret; +} + +static int +ar6000_ioctl_set_lq_threshold(struct net_device *dev, struct ifreq *rq) +{ + + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_LQ_THRESHOLD_PARAMS_CMD cmd; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (copy_from_user(&cmd, (char *)((unsigned int *)rq->ifr_data + 1), sizeof(cmd))) { + return -EFAULT; + } + + if( wmi_set_lq_threshold_params(ar->arWmi, &cmd) != A_OK ) { + ret = -EIO; + } + + return ret; +} + + +static int +ar6000_ioctl_set_probedSsid(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_PROBED_SSID_CMD cmd; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { + return -EFAULT; + } + + if (wmi_probedSsid_cmd(ar->arWmi, cmd.entryIndex, cmd.flag, cmd.ssidLength, + cmd.ssid) != A_OK) + { + ret = -EIO; + } + + return ret; +} + +static int +ar6000_ioctl_set_badAp(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_ADD_BAD_AP_CMD cmd; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + + if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { + return -EFAULT; + } + + if (cmd.badApIndex > WMI_MAX_BAD_AP_INDEX) { + return -EIO; + } + + if (A_MEMCMP(cmd.bssid, null_mac, AR6000_ETH_ADDR_LEN) == 0) { + /* + * This is a delete badAP. + */ + if (wmi_deleteBadAp_cmd(ar->arWmi, cmd.badApIndex) != A_OK) { + ret = -EIO; + } + } else { + if (wmi_addBadAp_cmd(ar->arWmi, cmd.badApIndex, cmd.bssid) != A_OK) { + ret = -EIO; + } + } + + return ret; +} + +static int +ar6000_ioctl_create_qos(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_CREATE_PSTREAM_CMD cmd; + A_STATUS ret; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + + if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { + return -EFAULT; + } + + ret = wmi_verify_tspec_params(&cmd, tspecCompliance); + if (ret == A_OK) + ret = wmi_create_pstream_cmd(ar->arWmi, &cmd); + + switch (ret) { + case A_OK: + return 0; + case A_EBUSY : + return -EBUSY; + case A_NO_MEMORY: + return -ENOMEM; + case A_EINVAL: + default: + return -EFAULT; + } +} + +static int +ar6000_ioctl_delete_qos(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_DELETE_PSTREAM_CMD cmd; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { + return -EFAULT; + } + + ret = wmi_delete_pstream_cmd(ar->arWmi, cmd.trafficClass, cmd.tsid); + + switch (ret) { + case A_OK: + return 0; + case A_EBUSY : + return -EBUSY; + case A_NO_MEMORY: + return -ENOMEM; + case A_EINVAL: + default: + return -EFAULT; + } +} + +static int +ar6000_ioctl_get_qos_queue(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + struct ar6000_queuereq qreq; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if( copy_from_user(&qreq, rq->ifr_data, + sizeof(struct ar6000_queuereq))) + return -EFAULT; + + qreq.activeTsids = wmi_get_mapped_qos_queue(ar->arWmi, qreq.trafficClass); + + if (copy_to_user(rq->ifr_data, &qreq, + sizeof(struct ar6000_queuereq))) + { + ret = -EFAULT; + } + + return ret; +} + +#ifdef CONFIG_HOST_TCMD_SUPPORT +static A_STATUS +ar6000_ioctl_tcmd_get_rx_report(struct net_device *dev, + struct ifreq *rq, A_UINT8 *data, A_UINT32 len) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + A_UINT32 buf[2]; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (down_interruptible(&ar->arSem)) { + return -ERESTARTSYS; + } + ar->tcmdRxReport = 0; + if (wmi_test_cmd(ar->arWmi, data, len) != A_OK) { + up(&ar->arSem); + return -EIO; + } + + wait_event_interruptible_timeout(arEvent, ar->tcmdRxReport != 0, wmitimeout * HZ); + + if (signal_pending(current)) { + ret = -EINTR; + } + + buf[0] = ar->tcmdRxTotalPkt; + buf[1] = ar->tcmdRxRssi; + if (!ret && copy_to_user(rq->ifr_data, buf, sizeof(buf))) { + ret = -EFAULT; + } + + up(&ar->arSem); + + return ret; +} + +void +ar6000_tcmd_rx_report_event(void *devt, A_UINT8 * results, int len) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)devt; + TCMD_CONT_RX * rx_rep = (TCMD_CONT_RX *)results; + + ar->tcmdRxTotalPkt = rx_rep->u.report.totalPkt; + ar->tcmdRxRssi = rx_rep->u.report.rssiInDBm; + ar->tcmdRxReport = 1; + + wake_up(&arEvent); +} +#endif /* CONFIG_HOST_TCMD_SUPPORT*/ + +static int +ar6000_ioctl_set_error_report_bitmask(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_TARGET_ERROR_REPORT_BITMASK cmd; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { + return -EFAULT; + } + + ret = wmi_set_error_report_bitmask(ar->arWmi, cmd.bitmask); + + return (ret==0 ? ret : -EINVAL); +} + +static int +ar6000_clear_target_stats(struct net_device *dev) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + TARGET_STATS *pStats = &ar->arTargetStats; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + AR6000_SPIN_LOCK(&ar->arLock, 0); + A_MEMZERO(pStats, sizeof(TARGET_STATS)); + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + return ret; +} + +static int +ar6000_ioctl_get_target_stats(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + TARGET_STATS_CMD cmd; + TARGET_STATS *pStats = &ar->arTargetStats; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { + return -EFAULT; + } + if (down_interruptible(&ar->arSem)) { + return -ERESTARTSYS; + } + + ar->statsUpdatePending = TRUE; + + if(wmi_get_stats_cmd(ar->arWmi) != A_OK) { + up(&ar->arSem); + return -EIO; + } + + wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == FALSE, wmitimeout * HZ); + + if (signal_pending(current)) { + ret = -EINTR; + } + + if (!ret && copy_to_user(rq->ifr_data, pStats, sizeof(*pStats))) { + ret = -EFAULT; + } + + if (cmd.clearStats == 1) { + ret = ar6000_clear_target_stats(dev); + } + + up(&ar->arSem); + + return ret; +} + +static int +ar6000_ioctl_set_access_params(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_SET_ACCESS_PARAMS_CMD cmd; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { + return -EFAULT; + } + + if (wmi_set_access_params_cmd(ar->arWmi, cmd.txop, cmd.eCWmin, cmd.eCWmax, + cmd.aifsn) == A_OK) + { + ret = 0; + } else { + ret = -EINVAL; + } + + return (ret); +} + +static int +ar6000_ioctl_set_disconnect_timeout(struct net_device *dev, struct ifreq *rq) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_DISC_TIMEOUT_CMD cmd; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (copy_from_user(&cmd, rq->ifr_data, sizeof(cmd))) { + return -EFAULT; + } + + if (wmi_disctimeout_cmd(ar->arWmi, cmd.disconnectTimeout) == A_OK) + { + ret = 0; + } else { + ret = -EINVAL; + } + + return (ret); +} + +static int +ar6000_xioctl_set_voice_pkt_size(struct net_device *dev, char * userdata) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_SET_VOICE_PKT_SIZE_CMD cmd; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (copy_from_user(&cmd, userdata, sizeof(cmd))) { + return -EFAULT; + } + + if (wmi_set_voice_pkt_size_cmd(ar->arWmi, cmd.voicePktSize) == A_OK) + { + ret = 0; + } else { + ret = -EINVAL; + } + + + return (ret); +} + +static int +ar6000_xioctl_set_max_sp_len(struct net_device *dev, char * userdata) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_SET_MAX_SP_LEN_CMD cmd; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (copy_from_user(&cmd, userdata, sizeof(cmd))) { + return -EFAULT; + } + + if (wmi_set_max_sp_len_cmd(ar->arWmi, cmd.maxSPLen) == A_OK) + { + ret = 0; + } else { + ret = -EINVAL; + } + + return (ret); +} + + +static int +ar6000_xioctl_set_bt_status_cmd(struct net_device *dev, char * userdata) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_SET_BT_STATUS_CMD cmd; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (copy_from_user(&cmd, userdata, sizeof(cmd))) { + return -EFAULT; + } + + if (wmi_set_bt_status_cmd(ar->arWmi, cmd.streamType, cmd.status) == A_OK) + { + ret = 0; + } else { + ret = -EINVAL; + } + + return (ret); +} + +static int +ar6000_xioctl_set_bt_params_cmd(struct net_device *dev, char * userdata) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_SET_BT_PARAMS_CMD cmd; + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (copy_from_user(&cmd, userdata, sizeof(cmd))) { + return -EFAULT; + } + + if (wmi_set_bt_params_cmd(ar->arWmi, &cmd) == A_OK) + { + ret = 0; + } else { + ret = -EINVAL; + } + + return (ret); +} + +#ifdef CONFIG_HOST_GPIO_SUPPORT +struct ar6000_gpio_intr_wait_cmd_s gpio_intr_results; +/* gpio_reg_results and gpio_data_available are protected by arSem */ +static struct ar6000_gpio_register_cmd_s gpio_reg_results; +static A_BOOL gpio_data_available; /* Requested GPIO data available */ +static A_BOOL gpio_intr_available; /* GPIO interrupt info available */ +static A_BOOL gpio_ack_received; /* GPIO ack was received */ + +/* Host-side initialization for General Purpose I/O support */ +void ar6000_gpio_init(void) +{ + gpio_intr_available = FALSE; + gpio_data_available = FALSE; + gpio_ack_received = FALSE; +} + +/* + * Called when a GPIO interrupt is received from the Target. + * intr_values shows which GPIO pins have interrupted. + * input_values shows a recent value of GPIO pins. + */ +void +ar6000_gpio_intr_rx(A_UINT32 intr_mask, A_UINT32 input_values) +{ + gpio_intr_results.intr_mask = intr_mask; + gpio_intr_results.input_values = input_values; + *((volatile A_BOOL *)&gpio_intr_available) = TRUE; + wake_up(&arEvent); +} + +/* + * This is called when a response is received from the Target + * for a previous or ar6000_gpio_input_get or ar6000_gpio_register_get + * call. + */ +void +ar6000_gpio_data_rx(A_UINT32 reg_id, A_UINT32 value) +{ + gpio_reg_results.gpioreg_id = reg_id; + gpio_reg_results.value = value; + *((volatile A_BOOL *)&gpio_data_available) = TRUE; + wake_up(&arEvent); +} + +/* + * This is called when an acknowledgement is received from the Target + * for a previous or ar6000_gpio_output_set or ar6000_gpio_register_set + * call. + */ +void +ar6000_gpio_ack_rx(void) +{ + gpio_ack_received = TRUE; + wake_up(&arEvent); +} + +A_STATUS +ar6000_gpio_output_set(struct net_device *dev, + A_UINT32 set_mask, + A_UINT32 clear_mask, + A_UINT32 enable_mask, + A_UINT32 disable_mask) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + gpio_ack_received = FALSE; + return wmi_gpio_output_set(ar->arWmi, + set_mask, clear_mask, enable_mask, disable_mask); +} + +static A_STATUS +ar6000_gpio_input_get(struct net_device *dev) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + *((volatile A_BOOL *)&gpio_data_available) = FALSE; + return wmi_gpio_input_get(ar->arWmi); +} + +static A_STATUS +ar6000_gpio_register_set(struct net_device *dev, + A_UINT32 gpioreg_id, + A_UINT32 value) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + gpio_ack_received = FALSE; + return wmi_gpio_register_set(ar->arWmi, gpioreg_id, value); +} + +static A_STATUS +ar6000_gpio_register_get(struct net_device *dev, + A_UINT32 gpioreg_id) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + *((volatile A_BOOL *)&gpio_data_available) = FALSE; + return wmi_gpio_register_get(ar->arWmi, gpioreg_id); +} + +static A_STATUS +ar6000_gpio_intr_ack(struct net_device *dev, + A_UINT32 ack_mask) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + gpio_intr_available = FALSE; + return wmi_gpio_intr_ack(ar->arWmi, ack_mask); +} +#endif /* CONFIG_HOST_GPIO_SUPPORT */ + +int ar6000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + HIF_DEVICE *hifDevice = ar->arHifDevice; + int ret, param, param2; + unsigned int address = 0; + unsigned int length = 0; + unsigned char *buffer; + char *userdata; + A_UINT32 connectCtrlFlags; + + + static WMI_SCAN_PARAMS_CMD scParams = {0, 0, 0, 0, 0, + WMI_SHORTSCANRATIO_DEFAULT, + DEFAULT_SCAN_CTRL_FLAGS, + 0}; + WMI_SET_AKMP_PARAMS_CMD akmpParams; + WMI_SET_PMKID_LIST_CMD pmkidInfo; + + if (cmd == AR6000_IOCTL_EXTENDED) + { + /* + * This allows for many more wireless ioctls than would otherwise + * be available. Applications embed the actual ioctl command in + * the first word of the parameter block, and use the command + * AR6000_IOCTL_EXTENDED_CMD on the ioctl call. + */ + get_user(cmd, (int *)rq->ifr_data); + userdata = (char *)(((unsigned int *)rq->ifr_data)+1); + } + else + { + userdata = (char *)rq->ifr_data; + } + + if ((ar->arWlanState == WLAN_DISABLED) && + ((cmd != AR6000_XIOCTRL_WMI_SET_WLAN_STATE) && + (cmd != AR6000_XIOCTL_DIAG_READ) && + (cmd != AR6000_XIOCTL_DIAG_WRITE))) + { + return -EIO; + } + + ret = 0; + switch(cmd) + { +#ifdef CONFIG_HOST_TCMD_SUPPORT + case AR6000_XIOCTL_TCMD_CONT_TX: + { + TCMD_CONT_TX txCmd; + + if (ar->tcmdPm == TCMD_PM_SLEEP) { + A_PRINTF("Can NOT send tx tcmd when target is asleep! \n"); + return -EFAULT; + } + + if(copy_from_user(&txCmd, userdata, sizeof(TCMD_CONT_TX))) + return -EFAULT; + wmi_test_cmd(ar->arWmi,(A_UINT8 *)&txCmd, sizeof(TCMD_CONT_TX)); + } + break; + case AR6000_XIOCTL_TCMD_CONT_RX: + { + TCMD_CONT_RX rxCmd; + + if (ar->tcmdPm == TCMD_PM_SLEEP) { + A_PRINTF("Can NOT send rx tcmd when target is asleep! \n"); + return -EFAULT; + } + if(copy_from_user(&rxCmd, userdata, sizeof(TCMD_CONT_RX))) + return -EFAULT; + switch(rxCmd.act) + { + case TCMD_CONT_RX_PROMIS: + case TCMD_CONT_RX_FILTER: + case TCMD_CONT_RX_SETMAC: + wmi_test_cmd(ar->arWmi,(A_UINT8 *)&rxCmd, + sizeof(TCMD_CONT_RX)); + break; + case TCMD_CONT_RX_REPORT: + ar6000_ioctl_tcmd_get_rx_report(dev, rq, + (A_UINT8 *)&rxCmd, sizeof(TCMD_CONT_RX)); + break; + default: + A_PRINTF("Unknown Cont Rx mode: %d\n",rxCmd.act); + return -EINVAL; + } + } + break; + case AR6000_XIOCTL_TCMD_PM: + { + TCMD_PM pmCmd; + + if(copy_from_user(&pmCmd, userdata, sizeof(TCMD_PM))) + return -EFAULT; + ar->tcmdPm = pmCmd.mode; + wmi_test_cmd(ar->arWmi, (A_UINT8*)&pmCmd, sizeof(TCMD_PM)); + } + break; +#endif /* CONFIG_HOST_TCMD_SUPPORT */ + + case AR6000_XIOCTL_BMI_DONE: + ret = BMIDone(hifDevice); + break; + + case AR6000_XIOCTL_BMI_READ_MEMORY: + get_user(address, (unsigned int *)userdata); + get_user(length, (unsigned int *)userdata + 1); + AR_DEBUG_PRINTF("Read Memory (address: 0x%x, length: %d)\n", + address, length); + if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) { + A_MEMZERO(buffer, length); + ret = BMIReadMemory(hifDevice, address, buffer, length); + if (copy_to_user(rq->ifr_data, buffer, length)) { + ret = -EFAULT; + } + A_FREE(buffer); + } else { + ret = -ENOMEM; + } + break; + + case AR6000_XIOCTL_BMI_WRITE_MEMORY: + get_user(address, (unsigned int *)userdata); + get_user(length, (unsigned int *)userdata + 1); + AR_DEBUG_PRINTF("Write Memory (address: 0x%x, length: %d)\n", + address, length); + if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) { + A_MEMZERO(buffer, length); + if (copy_from_user(buffer, &userdata[sizeof(address) + + sizeof(length)], length)) + { + ret = -EFAULT; + } else { + ret = BMIWriteMemory(hifDevice, address, buffer, length); + } + A_FREE(buffer); + } else { + ret = -ENOMEM; + } + break; + + case AR6000_XIOCTL_BMI_TEST: + AR_DEBUG_PRINTF("No longer supported\n"); + ret = -EOPNOTSUPP; + break; + + case AR6000_XIOCTL_BMI_EXECUTE: + get_user(address, (unsigned int *)userdata); + get_user(param, (unsigned int *)userdata + 1); + AR_DEBUG_PRINTF("Execute (address: 0x%x, param: %d)\n", + address, param); + ret = BMIExecute(hifDevice, address, ¶m); + put_user(param, (unsigned int *)rq->ifr_data); /* return value */ + break; + + case AR6000_XIOCTL_BMI_SET_APP_START: + get_user(address, (unsigned int *)userdata); + AR_DEBUG_PRINTF("Set App Start (address: 0x%x)\n", address); + ret = BMISetAppStart(hifDevice, address); + break; + + case AR6000_XIOCTL_BMI_READ_SOC_REGISTER: + get_user(address, (unsigned int *)userdata); + ret = BMIReadSOCRegister(hifDevice, address, ¶m); + put_user(param, (unsigned int *)rq->ifr_data); /* return value */ + break; + + case AR6000_XIOCTL_BMI_WRITE_SOC_REGISTER: + get_user(address, (unsigned int *)userdata); + get_user(param, (unsigned int *)userdata + 1); + ret = BMIWriteSOCRegister(hifDevice, address, param); + break; + +#ifdef HTC_RAW_INTERFACE + case AR6000_XIOCTL_HTC_RAW_OPEN: + ret = A_OK; + if (!arRawIfEnabled(ar)) { + /* make sure block size is set in case the target was reset since last + * BMI phase (i.e. flashup downloads) */ + ret = ar6000_SetHTCBlockSize(ar); + if (A_FAILED(ret)) { + break; + } + /* Terminate the BMI phase */ + ret = BMIDone(hifDevice); + if (ret == A_OK) { + ret = ar6000_htc_raw_open(ar); + } + } + break; + + case AR6000_XIOCTL_HTC_RAW_CLOSE: + if (arRawIfEnabled(ar)) { + ret = ar6000_htc_raw_close(ar); + arRawIfEnabled(ar) = FALSE; + } else { + ret = A_ERROR; + } + break; + + case AR6000_XIOCTL_HTC_RAW_READ: + if (arRawIfEnabled(ar)) { + unsigned int streamID; + get_user(streamID, (unsigned int *)userdata); + get_user(length, (unsigned int *)userdata + 1); + buffer = rq->ifr_data + sizeof(length); + ret = ar6000_htc_raw_read(ar, (HTC_RAW_STREAM_ID)streamID, + buffer, length); + put_user(ret, (unsigned int *)rq->ifr_data); + } else { + ret = A_ERROR; + } + break; + + case AR6000_XIOCTL_HTC_RAW_WRITE: + if (arRawIfEnabled(ar)) { + unsigned int streamID; + get_user(streamID, (unsigned int *)userdata); + get_user(length, (unsigned int *)userdata + 1); + buffer = userdata + sizeof(streamID) + sizeof(length); + ret = ar6000_htc_raw_write(ar, (HTC_RAW_STREAM_ID)streamID, + buffer, length); + put_user(ret, (unsigned int *)rq->ifr_data); + } else { + ret = A_ERROR; + } + break; +#endif /* HTC_RAW_INTERFACE */ + + case AR6000_IOCTL_WMI_GETREV: + { + if (copy_to_user(rq->ifr_data, &ar->arVersion, + sizeof(ar->arVersion))) + { + ret = -EFAULT; + } + break; + } + case AR6000_IOCTL_WMI_SETPWR: + { + WMI_POWER_MODE_CMD pwrModeCmd; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&pwrModeCmd, userdata, + sizeof(pwrModeCmd))) + { + ret = -EFAULT; + } else { + if (wmi_powermode_cmd(ar->arWmi, pwrModeCmd.powerMode) + != A_OK) + { + ret = -EIO; + } + } + break; + } + case AR6000_IOCTL_WMI_SET_IBSS_PM_CAPS: + { + WMI_IBSS_PM_CAPS_CMD ibssPmCaps; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&ibssPmCaps, userdata, + sizeof(ibssPmCaps))) + { + ret = -EFAULT; + } else { + if (wmi_ibsspmcaps_cmd(ar->arWmi, ibssPmCaps.power_saving, ibssPmCaps.ttl, + ibssPmCaps.atim_windows, ibssPmCaps.timeout_value) != A_OK) + { + ret = -EIO; + } + AR6000_SPIN_LOCK(&ar->arLock, 0); + ar->arIbssPsEnable = ibssPmCaps.power_saving; + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + } + break; + } + case AR6000_IOCTL_WMI_SET_PMPARAMS: + { + WMI_POWER_PARAMS_CMD pmParams; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&pmParams, userdata, + sizeof(pmParams))) + { + ret = -EFAULT; + } else { + if (wmi_pmparams_cmd(ar->arWmi, pmParams.idle_period, + pmParams.pspoll_number, + pmParams.dtim_policy) != A_OK) + { + ret = -EIO; + } + } + break; + } + case AR6000_IOCTL_WMI_SETSCAN: + { + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&scParams, userdata, + sizeof(scParams))) + { + ret = -EFAULT; + } else { + if (CAN_SCAN_IN_CONNECT(scParams.scanCtrlFlags)) { + ar->arSkipScan = FALSE; + } else { + ar->arSkipScan = TRUE; + } + + if (wmi_scanparams_cmd(ar->arWmi, scParams.fg_start_period, + scParams.fg_end_period, + scParams.bg_period, + scParams.minact_chdwell_time, + scParams.maxact_chdwell_time, + scParams.pas_chdwell_time, + scParams.shortScanRatio, + scParams.scanCtrlFlags, + scParams.max_dfsch_act_time) != A_OK) + { + ret = -EIO; + } + } + break; + } + case AR6000_IOCTL_WMI_SETLISTENINT: + { + WMI_LISTEN_INT_CMD listenCmd; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&listenCmd, userdata, + sizeof(listenCmd))) + { + ret = -EFAULT; + } else { + if (wmi_listeninterval_cmd(ar->arWmi, listenCmd.listenInterval, listenCmd.numBeacons) != A_OK) { + ret = -EIO; + } else { + AR6000_SPIN_LOCK(&ar->arLock, 0); + ar->arListenInterval = param; + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + } + + } + break; + } + case AR6000_IOCTL_WMI_SET_BMISS_TIME: + { + WMI_BMISS_TIME_CMD bmissCmd; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&bmissCmd, userdata, + sizeof(bmissCmd))) + { + ret = -EFAULT; + } else { + if (wmi_bmisstime_cmd(ar->arWmi, bmissCmd.bmissTime, bmissCmd.numBeacons) != A_OK) { + ret = -EIO; + } + } + break; + } + case AR6000_IOCTL_WMI_SETBSSFILTER: + { + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else { + + get_user(param, (unsigned char *)userdata); + get_user(param2, (unsigned int *)(userdata + 1)); + printk("SETBSSFILTER: filter 0x%x, mask: 0x%x\n", param, param2); + if (wmi_bssfilter_cmd(ar->arWmi, param, param2) != A_OK) { + ret = -EIO; + } + } + break; + } + case AR6000_IOCTL_WMI_SET_SNRTHRESHOLD: + { + ret = ar6000_ioctl_set_snr_threshold(dev, rq); + break; + } + case AR6000_XIOCTL_WMI_SET_RSSITHRESHOLD: + { + ret = ar6000_ioctl_set_rssi_threshold(dev, rq); + break; + } + case AR6000_XIOCTL_WMI_CLR_RSSISNR: + { + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } + ret = wmi_clr_rssi_snr(ar->arWmi); + break; + } + case AR6000_XIOCTL_WMI_SET_LQTHRESHOLD: + { + ret = ar6000_ioctl_set_lq_threshold(dev, rq); + break; + } + case AR6000_XIOCTL_WMI_SET_LPREAMBLE: + { + WMI_SET_LPREAMBLE_CMD setLpreambleCmd; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&setLpreambleCmd, userdata, + sizeof(setLpreambleCmd))) + { + ret = -EFAULT; + } else { + if (wmi_set_lpreamble_cmd(ar->arWmi, setLpreambleCmd.status) + != A_OK) + { + ret = -EIO; + } + } + + break; + } + case AR6000_XIOCTL_WMI_SET_RTS: + { + WMI_SET_RTS_CMD rtsCmd; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&rtsCmd, userdata, + sizeof(rtsCmd))) + { + ret = -EFAULT; + } else { + if (wmi_set_rts_cmd(ar->arWmi, rtsCmd.threshold) + != A_OK) + { + ret = -EIO; + } + } + + break; + } + case AR6000_XIOCTL_WMI_SET_WMM: + { + ret = ar6000_ioctl_set_wmm(dev, rq); + break; + } + case AR6000_XIOCTL_WMI_SET_TXOP: + { + ret = ar6000_ioctl_set_txop(dev, rq); + break; + } + case AR6000_XIOCTL_WMI_GET_RD: + { + ret = ar6000_ioctl_get_rd(dev, rq); + break; + } + case AR6000_IOCTL_WMI_SET_CHANNELPARAMS: + { + ret = ar6000_ioctl_set_channelParams(dev, rq); + break; + } + case AR6000_IOCTL_WMI_SET_PROBEDSSID: + { + ret = ar6000_ioctl_set_probedSsid(dev, rq); + break; + } + case AR6000_IOCTL_WMI_SET_BADAP: + { + ret = ar6000_ioctl_set_badAp(dev, rq); + break; + } + case AR6000_IOCTL_WMI_CREATE_QOS: + { + ret = ar6000_ioctl_create_qos(dev, rq); + break; + } + case AR6000_IOCTL_WMI_DELETE_QOS: + { + ret = ar6000_ioctl_delete_qos(dev, rq); + break; + } + case AR6000_IOCTL_WMI_GET_QOS_QUEUE: + { + ret = ar6000_ioctl_get_qos_queue(dev, rq); + break; + } + case AR6000_IOCTL_WMI_GET_TARGET_STATS: + { + ret = ar6000_ioctl_get_target_stats(dev, rq); + break; + } + case AR6000_IOCTL_WMI_SET_ERROR_REPORT_BITMASK: + { + ret = ar6000_ioctl_set_error_report_bitmask(dev, rq); + break; + } + case AR6000_IOCTL_WMI_SET_ASSOC_INFO: + { + WMI_SET_ASSOC_INFO_CMD cmd; + A_UINT8 assocInfo[WMI_MAX_ASSOC_INFO_LEN]; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else { + get_user(cmd.ieType, userdata); + if (cmd.ieType >= WMI_MAX_ASSOC_INFO_TYPE) { + ret = -EIO; + } else { + get_user(cmd.bufferSize, userdata + 1); + if (cmd.bufferSize > WMI_MAX_ASSOC_INFO_LEN) { + ret = -EFAULT; + break; + } + if (copy_from_user(assocInfo, userdata + 2, + cmd.bufferSize)) + { + ret = -EFAULT; + } else { + if (wmi_associnfo_cmd(ar->arWmi, cmd.ieType, + cmd.bufferSize, + assocInfo) != A_OK) + { + ret = -EIO; + } + } + } + } + break; + } + case AR6000_IOCTL_WMI_SET_ACCESS_PARAMS: + { + ret = ar6000_ioctl_set_access_params(dev, rq); + break; + } + case AR6000_IOCTL_WMI_SET_DISC_TIMEOUT: + { + ret = ar6000_ioctl_set_disconnect_timeout(dev, rq); + break; + } + case AR6000_XIOCTL_FORCE_TARGET_RESET: + { + if (ar->arHtcTarget) + { +// HTCForceReset(htcTarget); + } + else + { + AR_DEBUG_PRINTF("ar6000_ioctl cannot attempt reset.\n"); + } + break; + } + case AR6000_XIOCTL_TARGET_INFO: + case AR6000_XIOCTL_CHECK_TARGET_READY: /* backwards compatibility */ + { + /* If we made it to here, then the Target exists and is ready. */ + + if (cmd == AR6000_XIOCTL_TARGET_INFO) { + if (copy_to_user((A_UINT32 *)rq->ifr_data, &ar->arVersion.target_ver, + sizeof(ar->arVersion.target_ver))) + { + ret = -EFAULT; + } + if (copy_to_user(((A_UINT32 *)rq->ifr_data)+1, &ar->arTargetType, + sizeof(ar->arTargetType))) + { + ret = -EFAULT; + } + } + break; + } + case AR6000_XIOCTL_WMI_SET_HB_CHALLENGE_RESP_PARAMS: + { + WMI_SET_HB_CHALLENGE_RESP_PARAMS_CMD hbparam; + + if (copy_from_user(&hbparam, userdata, sizeof(hbparam))) + { + ret = -EFAULT; + } else { + AR6000_SPIN_LOCK(&ar->arLock, 0); + /* Start a cyclic timer with the parameters provided. */ + if (hbparam.frequency) { + ar->arHBChallengeResp.frequency = hbparam.frequency; + } + if (hbparam.threshold) { + ar->arHBChallengeResp.missThres = hbparam.threshold; + } + + /* Delete the pending timer and start a new one */ + if (timer_pending(&ar->arHBChallengeResp.timer)) { + A_UNTIMEOUT(&ar->arHBChallengeResp.timer); + } + A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0); + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + } + break; + } + case AR6000_XIOCTL_WMI_GET_HB_CHALLENGE_RESP: + { + A_UINT32 cookie; + + if (copy_from_user(&cookie, userdata, sizeof(cookie))) { + return -EFAULT; + } + + /* Send the challenge on the control channel */ + if (wmi_get_challenge_resp_cmd(ar->arWmi, cookie, APP_HB_CHALLENGE) != A_OK) { + return -EIO; + } + break; + } +#ifdef USER_KEYS + case AR6000_XIOCTL_USER_SETKEYS: + { + + ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_RUN; + + if (copy_from_user(&ar->user_key_ctrl, userdata, + sizeof(ar->user_key_ctrl))) + { + return -EFAULT; + } + + A_PRINTF("ar6000 USER set key %x\n", ar->user_key_ctrl); + break; + } +#endif /* USER_KEYS */ + +#ifdef CONFIG_HOST_GPIO_SUPPORT + case AR6000_XIOCTL_GPIO_OUTPUT_SET: + { + struct ar6000_gpio_output_set_cmd_s gpio_output_set_cmd; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + if (down_interruptible(&ar->arSem)) { + return -ERESTARTSYS; + } + + if (copy_from_user(&gpio_output_set_cmd, userdata, + sizeof(gpio_output_set_cmd))) + { + ret = -EFAULT; + } else { + ret = ar6000_gpio_output_set(dev, + gpio_output_set_cmd.set_mask, + gpio_output_set_cmd.clear_mask, + gpio_output_set_cmd.enable_mask, + gpio_output_set_cmd.disable_mask); + if (ret != A_OK) { + ret = EIO; + } + } + up(&ar->arSem); + break; + } + case AR6000_XIOCTL_GPIO_INPUT_GET: + { + if (ar->arWmiReady == FALSE) { + return -EIO; + } + if (down_interruptible(&ar->arSem)) { + return -ERESTARTSYS; + } + + ret = ar6000_gpio_input_get(dev); + if (ret != A_OK) { + up(&ar->arSem); + return -EIO; + } + + /* Wait for Target to respond. */ + wait_event_interruptible(arEvent, gpio_data_available); + if (signal_pending(current)) { + ret = -EINTR; + } else { + A_ASSERT(gpio_reg_results.gpioreg_id == GPIO_ID_NONE); + + if (copy_to_user(userdata, &gpio_reg_results.value, + sizeof(gpio_reg_results.value))) + { + ret = -EFAULT; + } + } + up(&ar->arSem); + break; + } + case AR6000_XIOCTL_GPIO_REGISTER_SET: + { + struct ar6000_gpio_register_cmd_s gpio_register_cmd; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + if (down_interruptible(&ar->arSem)) { + return -ERESTARTSYS; + } + + if (copy_from_user(&gpio_register_cmd, userdata, + sizeof(gpio_register_cmd))) + { + ret = -EFAULT; + } else { + ret = ar6000_gpio_register_set(dev, + gpio_register_cmd.gpioreg_id, + gpio_register_cmd.value); + if (ret != A_OK) { + ret = EIO; + } + + /* Wait for acknowledgement from Target */ + wait_event_interruptible(arEvent, gpio_ack_received); + if (signal_pending(current)) { + ret = -EINTR; + } + } + up(&ar->arSem); + break; + } + case AR6000_XIOCTL_GPIO_REGISTER_GET: + { + struct ar6000_gpio_register_cmd_s gpio_register_cmd; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + if (down_interruptible(&ar->arSem)) { + return -ERESTARTSYS; + } + + if (copy_from_user(&gpio_register_cmd, userdata, + sizeof(gpio_register_cmd))) + { + ret = -EFAULT; + } else { + ret = ar6000_gpio_register_get(dev, gpio_register_cmd.gpioreg_id); + if (ret != A_OK) { + up(&ar->arSem); + return -EIO; + } + + /* Wait for Target to respond. */ + wait_event_interruptible(arEvent, gpio_data_available); + if (signal_pending(current)) { + ret = -EINTR; + } else { + A_ASSERT(gpio_register_cmd.gpioreg_id == gpio_reg_results.gpioreg_id); + if (copy_to_user(userdata, &gpio_reg_results, + sizeof(gpio_reg_results))) + { + ret = -EFAULT; + } + } + } + up(&ar->arSem); + break; + } + case AR6000_XIOCTL_GPIO_INTR_ACK: + { + struct ar6000_gpio_intr_ack_cmd_s gpio_intr_ack_cmd; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + if (down_interruptible(&ar->arSem)) { + return -ERESTARTSYS; + } + + if (copy_from_user(&gpio_intr_ack_cmd, userdata, + sizeof(gpio_intr_ack_cmd))) + { + ret = -EFAULT; + } else { + ret = ar6000_gpio_intr_ack(dev, gpio_intr_ack_cmd.ack_mask); + if (ret != A_OK) { + ret = EIO; + } + } + up(&ar->arSem); + break; + } + case AR6000_XIOCTL_GPIO_INTR_WAIT: + { + /* Wait for Target to report an interrupt. */ + dev_hold(dev); + rtnl_unlock(); + wait_event_interruptible(arEvent, gpio_intr_available); + rtnl_lock(); + __dev_put(dev); + + if (signal_pending(current)) { + ret = -EINTR; + } else { + if (copy_to_user(userdata, &gpio_intr_results, + sizeof(gpio_intr_results))) + { + ret = -EFAULT; + } + } + break; + } +#endif /* CONFIG_HOST_GPIO_SUPPORT */ + + case AR6000_XIOCTL_DBGLOG_CFG_MODULE: + { + struct ar6000_dbglog_module_config_s config; + + if (copy_from_user(&config, userdata, sizeof(config))) { + return -EFAULT; + } + + /* Send the challenge on the control channel */ + if (wmi_config_debug_module_cmd(ar->arWmi, config.mmask, + config.tsr, config.rep, + config.size, config.valid) != A_OK) + { + return -EIO; + } + break; + } + + case AR6000_XIOCTL_DBGLOG_GET_DEBUG_LOGS: + { + /* Send the challenge on the control channel */ + if (ar6000_dbglog_get_debug_logs(ar) != A_OK) + { + return -EIO; + } + break; + } + + case AR6000_XIOCTL_SET_ADHOC_BSSID: + { + WMI_SET_ADHOC_BSSID_CMD adhocBssid; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&adhocBssid, userdata, + sizeof(adhocBssid))) + { + ret = -EFAULT; + } else if (A_MEMCMP(adhocBssid.bssid, bcast_mac, + AR6000_ETH_ADDR_LEN) == 0) + { + ret = -EFAULT; + } else { + + A_MEMCPY(ar->arReqBssid, adhocBssid.bssid, sizeof(ar->arReqBssid)); + } + break; + } + + case AR6000_XIOCTL_SET_OPT_MODE: + { + WMI_SET_OPT_MODE_CMD optModeCmd; + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&optModeCmd, userdata, + sizeof(optModeCmd))) + { + ret = -EFAULT; + } else if (ar->arConnected && optModeCmd.optMode == SPECIAL_ON) { + ret = -EFAULT; + + } else if (wmi_set_opt_mode_cmd(ar->arWmi, optModeCmd.optMode) + != A_OK) + { + ret = -EIO; + } + break; + } + + case AR6000_XIOCTL_OPT_SEND_FRAME: + { + WMI_OPT_TX_FRAME_CMD optTxFrmCmd; + A_UINT8 data[MAX_OPT_DATA_LEN]; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&optTxFrmCmd, userdata, + sizeof(optTxFrmCmd))) + { + ret = -EFAULT; + } else if (copy_from_user(data, + userdata+sizeof(WMI_OPT_TX_FRAME_CMD)-1, + optTxFrmCmd.optIEDataLen)) + { + ret = -EFAULT; + } else { + ret = wmi_opt_tx_frame_cmd(ar->arWmi, + optTxFrmCmd.frmType, + optTxFrmCmd.dstAddr, + optTxFrmCmd.bssid, + optTxFrmCmd.optIEDataLen, + data); + } + + break; + } + case AR6000_XIOCTL_WMI_SETRETRYLIMITS: + { + WMI_SET_RETRY_LIMITS_CMD setRetryParams; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&setRetryParams, userdata, + sizeof(setRetryParams))) + { + ret = -EFAULT; + } else { + if (wmi_set_retry_limits_cmd(ar->arWmi, setRetryParams.frameType, + setRetryParams.trafficClass, + setRetryParams.maxRetries, + setRetryParams.enableNotify) != A_OK) + { + ret = -EIO; + } + AR6000_SPIN_LOCK(&ar->arLock, 0); + ar->arMaxRetries = setRetryParams.maxRetries; + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + } + break; + } + + case AR6000_XIOCTL_SET_ADHOC_BEACON_INTVAL: + { + WMI_BEACON_INT_CMD bIntvlCmd; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&bIntvlCmd, userdata, + sizeof(bIntvlCmd))) + { + ret = -EFAULT; + } else if (wmi_set_adhoc_bconIntvl_cmd(ar->arWmi, bIntvlCmd.beaconInterval) + != A_OK) + { + ret = -EIO; + } + break; + } + case IEEE80211_IOCTL_SETAUTHALG: + { + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + struct ieee80211req_authalg req; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&req, userdata, + sizeof(struct ieee80211req_authalg))) + { + ret = -EFAULT; + } else if (req.auth_alg == AUTH_ALG_OPEN_SYSTEM) { + ar->arDot11AuthMode = OPEN_AUTH; + ar->arPairwiseCrypto = NONE_CRYPT; + ar->arGroupCrypto = NONE_CRYPT; + } else if (req.auth_alg == AUTH_ALG_LEAP) { + ar->arDot11AuthMode = LEAP_AUTH; + } else { + ret = -EIO; + } + break; + } + + case AR6000_XIOCTL_SET_VOICE_PKT_SIZE: + ret = ar6000_xioctl_set_voice_pkt_size(dev, userdata); + break; + + case AR6000_XIOCTL_SET_MAX_SP: + ret = ar6000_xioctl_set_max_sp_len(dev, userdata); + break; + + case AR6000_XIOCTL_WMI_GET_ROAM_TBL: + ret = ar6000_ioctl_get_roam_tbl(dev, rq); + break; + case AR6000_XIOCTL_WMI_SET_ROAM_CTRL: + ret = ar6000_ioctl_set_roam_ctrl(dev, userdata); + break; + case AR6000_XIOCTRL_WMI_SET_POWERSAVE_TIMERS: + ret = ar6000_ioctl_set_powersave_timers(dev, userdata); + break; + case AR6000_XIOCTRL_WMI_GET_POWER_MODE: + ret = ar6000_ioctl_get_power_mode(dev, rq); + break; + case AR6000_XIOCTRL_WMI_SET_WLAN_STATE: + get_user(ar->arWlanState, (unsigned int *)userdata); + if (ar->arWmiReady == FALSE) { + ret = -EIO; + break; + } + + if (ar->arWlanState == WLAN_ENABLED) { + /* Enable foreground scanning */ + if (wmi_scanparams_cmd(ar->arWmi, scParams.fg_start_period, + scParams.fg_end_period, + scParams.bg_period, + scParams.minact_chdwell_time, + scParams.maxact_chdwell_time, + scParams.pas_chdwell_time, + scParams.shortScanRatio, + scParams.scanCtrlFlags, + scParams.max_dfsch_act_time) != A_OK) + { + ret = -EIO; + } + if (ar->arSsidLen) { + ar->arConnectPending = TRUE; + if (wmi_connect_cmd(ar->arWmi, ar->arNetworkType, + ar->arDot11AuthMode, ar->arAuthMode, + ar->arPairwiseCrypto, + ar->arPairwiseCryptoLen, + ar->arGroupCrypto, ar->arGroupCryptoLen, + ar->arSsidLen, ar->arSsid, + ar->arReqBssid, ar->arChannelHint, + ar->arConnectCtrlFlags) != A_OK) + { + ret = -EIO; + ar->arConnectPending = FALSE; + } + } + } else { + /* Disconnect from the AP and disable foreground scanning */ + AR6000_SPIN_LOCK(&ar->arLock, 0); + if (ar->arConnected == TRUE || ar->arConnectPending == TRUE) { + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + wmi_disconnect_cmd(ar->arWmi); + } else { + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + } + + if (wmi_scanparams_cmd(ar->arWmi, 0xFFFF, 0, 0, 0, 0, 0, 0, 0xFF, 0) != A_OK) + { + ret = -EIO; + } + } + break; + case AR6000_XIOCTL_WMI_GET_ROAM_DATA: + ret = ar6000_ioctl_get_roam_data(dev, rq); + break; + case AR6000_XIOCTL_WMI_SET_BT_STATUS: + ret = ar6000_xioctl_set_bt_status_cmd(dev, userdata); + break; + case AR6000_XIOCTL_WMI_SET_BT_PARAMS: + ret = ar6000_xioctl_set_bt_params_cmd(dev, userdata); + break; + case AR6000_XIOCTL_WMI_STARTSCAN: + { + WMI_START_SCAN_CMD setStartScanCmd; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&setStartScanCmd, userdata, + sizeof(setStartScanCmd))) + { + ret = -EFAULT; + } else { + if (wmi_startscan_cmd(ar->arWmi, setStartScanCmd.scanType, + setStartScanCmd.forceFgScan, + setStartScanCmd.isLegacy, + setStartScanCmd.homeDwellTime, + setStartScanCmd.forceScanInterval) != A_OK) + { + ret = -EIO; + } + } + break; + } + case AR6000_XIOCTL_WMI_SETFIXRATES: + { + WMI_FIX_RATES_CMD setFixRatesCmd; + A_STATUS returnStatus; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&setFixRatesCmd, userdata, + sizeof(setFixRatesCmd))) + { + ret = -EFAULT; + } else { + returnStatus = wmi_set_fixrates_cmd(ar->arWmi, setFixRatesCmd.fixRateMask); + if (returnStatus == A_EINVAL) + { + ret = -EINVAL; + } + else if(returnStatus != A_OK) { + ret = -EIO; + } + } + break; + } + + case AR6000_XIOCTL_WMI_GETFIXRATES: + { + WMI_FIX_RATES_CMD getFixRatesCmd; + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (down_interruptible(&ar->arSem)) { + return -ERESTARTSYS; + } + /* Used copy_from_user/copy_to_user to access user space data */ + if (copy_from_user(&getFixRatesCmd, userdata, sizeof(getFixRatesCmd))) { + ret = -EFAULT; + } else { + ar->arRateMask = 0xFFFF; + + if (wmi_get_ratemask_cmd(ar->arWmi) != A_OK) { + up(&ar->arSem); + return -EIO; + } + + wait_event_interruptible_timeout(arEvent, ar->arRateMask != 0xFFFF, wmitimeout * HZ); + + if (signal_pending(current)) { + ret = -EINTR; + } + + if (!ret) { + getFixRatesCmd.fixRateMask = ar->arRateMask; + } + + if(copy_to_user(userdata, &getFixRatesCmd, sizeof(getFixRatesCmd))) { + ret = -EFAULT; + } + + up(&ar->arSem); + } + break; + } + case AR6000_XIOCTL_WMI_SET_AUTHMODE: + { + WMI_SET_AUTH_MODE_CMD setAuthMode; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&setAuthMode, userdata, + sizeof(setAuthMode))) + { + ret = -EFAULT; + } else { + if (wmi_set_authmode_cmd(ar->arWmi, setAuthMode.mode) != A_OK) + { + ret = -EIO; + } + } + break; + } + case AR6000_XIOCTL_WMI_SET_REASSOCMODE: + { + WMI_SET_REASSOC_MODE_CMD setReassocMode; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&setReassocMode, userdata, + sizeof(setReassocMode))) + { + ret = -EFAULT; + } else { + if (wmi_set_reassocmode_cmd(ar->arWmi, setReassocMode.mode) != A_OK) + { + ret = -EIO; + } + } + break; + } + case AR6000_XIOCTL_DIAG_READ: + { + A_UINT32 addr, data; + get_user(addr, (unsigned int *)userdata); + if (ar6000_ReadRegDiag(ar->arHifDevice, &addr, &data) != A_OK) { + ret = -EIO; + } + put_user(data, (unsigned int *)userdata + 1); + break; + } + case AR6000_XIOCTL_DIAG_WRITE: + { + A_UINT32 addr, data; + get_user(addr, (unsigned int *)userdata); + get_user(data, (unsigned int *)userdata + 1); + if (ar6000_WriteRegDiag(ar->arHifDevice, &addr, &data) != A_OK) { + ret = -EIO; + } + break; + } + case AR6000_XIOCTL_WMI_SET_KEEPALIVE: + { + WMI_SET_KEEPALIVE_CMD setKeepAlive; + if (ar->arWmiReady == FALSE) { + return -EIO; + } else if (copy_from_user(&setKeepAlive, userdata, + sizeof(setKeepAlive))){ + ret = -EFAULT; + } else { + if (wmi_set_keepalive_cmd(ar->arWmi, setKeepAlive.keepaliveInterval) != A_OK) { + ret = -EIO; + } + } + break; + } + case AR6000_XIOCTL_WMI_GET_KEEPALIVE: + { + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_GET_KEEPALIVE_CMD getKeepAlive; + int ret = 0; + if (ar->arWmiReady == FALSE) { + return -EIO; + } + if (down_interruptible(&ar->arSem)) { + return -ERESTARTSYS; + } + if (copy_from_user(&getKeepAlive, userdata,sizeof(getKeepAlive))) { + ret = -EFAULT; + } else { + getKeepAlive.keepaliveInterval = wmi_get_keepalive_cmd(ar->arWmi); + ar->arKeepaliveConfigured = 0xFF; + if (wmi_get_keepalive_configured(ar->arWmi) != A_OK){ + up(&ar->arSem); + return -EIO; + } + wait_event_interruptible_timeout(arEvent, ar->arKeepaliveConfigured != 0xFF, wmitimeout * HZ); + if (signal_pending(current)) { + ret = -EINTR; + } + + if (!ret) { + getKeepAlive.configured = ar->arKeepaliveConfigured; + } + if (copy_to_user(userdata, &getKeepAlive, sizeof(getKeepAlive))) { + ret = -EFAULT; + } + up(&ar->arSem); + } + break; + } + case AR6000_XIOCTL_WMI_SET_APPIE: + { + WMI_SET_APPIE_CMD appIEcmd; + A_UINT8 appIeInfo[IEEE80211_APPIE_FRAME_MAX_LEN]; + A_UINT32 fType,ieLen; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + get_user(fType, (A_UINT32 *)userdata); + appIEcmd.mgmtFrmType = fType; + if (appIEcmd.mgmtFrmType >= IEEE80211_APPIE_NUM_OF_FRAME) { + ret = -EIO; + } else { + get_user(ieLen, (A_UINT32 *)(userdata + 4)); + appIEcmd.ieLen = ieLen; + if (appIEcmd.ieLen > IEEE80211_APPIE_FRAME_MAX_LEN) { + ret = -EIO; + break; + } + if (copy_from_user(appIeInfo, userdata + 8, appIEcmd.ieLen)) { + ret = -EFAULT; + } else { + if (wmi_set_appie_cmd(ar->arWmi, appIEcmd.mgmtFrmType, + appIEcmd.ieLen, appIeInfo) != A_OK) + { + ret = -EIO; + } + } + } + break; + } + case AR6000_XIOCTL_WMI_SET_MGMT_FRM_RX_FILTER: + { + WMI_BSS_FILTER_CMD cmd; + A_UINT32 filterType; + + if (copy_from_user(&filterType, userdata, sizeof(A_UINT32))) + { + return -EFAULT; + } + if (filterType & (IEEE80211_FILTER_TYPE_BEACON | + IEEE80211_FILTER_TYPE_PROBE_RESP)) + { + cmd.bssFilter = ALL_BSS_FILTER; + } else { + cmd.bssFilter = NONE_BSS_FILTER; + } + if (wmi_bssfilter_cmd(ar->arWmi, cmd.bssFilter, 0) != A_OK) { + ret = -EIO; + } + + AR6000_SPIN_LOCK(&ar->arLock, 0); + ar->arMgmtFilter = filterType; + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + break; + } + case AR6000_XIOCTL_WMI_SET_WSC_STATUS: + { + A_UINT32 wsc_status; + + if (copy_from_user(&wsc_status, userdata, sizeof(A_UINT32))) + { + return -EFAULT; + } + if (wmi_set_wsc_status_cmd(ar->arWmi, wsc_status) != A_OK) { + ret = -EIO; + } + break; + } + case AR6000_XIOCTL_BMI_ROMPATCH_INSTALL: + { + A_UINT32 ROM_addr; + A_UINT32 RAM_addr; + A_UINT32 nbytes; + A_UINT32 do_activate; + A_UINT32 rompatch_id; + + get_user(ROM_addr, (A_UINT32 *)userdata); + get_user(RAM_addr, (A_UINT32 *)userdata + 1); + get_user(nbytes, (A_UINT32 *)userdata + 2); + get_user(do_activate, (A_UINT32 *)userdata + 3); + AR_DEBUG_PRINTF("Install rompatch from ROM: 0x%x to RAM: 0x%x length: %d\n", + ROM_addr, RAM_addr, nbytes); + ret = BMIrompatchInstall(hifDevice, ROM_addr, RAM_addr, + nbytes, do_activate, &rompatch_id); + if (ret == A_OK) { + put_user(rompatch_id, (unsigned int *)rq->ifr_data); /* return value */ + } + break; + } + + case AR6000_XIOCTL_BMI_ROMPATCH_UNINSTALL: + { + A_UINT32 rompatch_id; + + get_user(rompatch_id, (A_UINT32 *)userdata); + AR_DEBUG_PRINTF("UNinstall rompatch_id %d\n", rompatch_id); + ret = BMIrompatchUninstall(hifDevice, rompatch_id); + break; + } + + case AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE: + case AR6000_XIOCTL_BMI_ROMPATCH_DEACTIVATE: + { + A_UINT32 rompatch_count; + + get_user(rompatch_count, (A_UINT32 *)userdata); + AR_DEBUG_PRINTF("Change rompatch activation count=%d\n", rompatch_count); + length = sizeof(A_UINT32) * rompatch_count; + if ((buffer = (unsigned char *)A_MALLOC(length)) != NULL) { + A_MEMZERO(buffer, length); + if (copy_from_user(buffer, &userdata[sizeof(rompatch_count)], length)) + { + ret = -EFAULT; + } else { + if (cmd == AR6000_XIOCTL_BMI_ROMPATCH_ACTIVATE) { + ret = BMIrompatchActivate(hifDevice, rompatch_count, (A_UINT32 *)buffer); + } else { + ret = BMIrompatchDeactivate(hifDevice, rompatch_count, (A_UINT32 *)buffer); + } + } + A_FREE(buffer); + } else { + ret = -ENOMEM; + } + + break; + } + + case AR6000_XIOCTL_WMI_SET_HOST_SLEEP_MODE: + { + WMI_SET_HOST_SLEEP_MODE_CMD setHostSleepMode; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&setHostSleepMode, userdata, + sizeof(setHostSleepMode))) + { + ret = -EFAULT; + } else { + if (wmi_set_host_sleep_mode_cmd(ar->arWmi, + &setHostSleepMode) != A_OK) + { + ret = -EIO; + } + } + break; + } + case AR6000_XIOCTL_WMI_SET_WOW_MODE: + { + WMI_SET_WOW_MODE_CMD setWowMode; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&setWowMode, userdata, + sizeof(setWowMode))) + { + ret = -EFAULT; + } else { + if (wmi_set_wow_mode_cmd(ar->arWmi, + &setWowMode) != A_OK) + { + ret = -EIO; + } + } + break; + } + case AR6000_XIOCTL_WMI_GET_WOW_LIST: + { + WMI_GET_WOW_LIST_CMD getWowList; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&getWowList, userdata, + sizeof(getWowList))) + { + ret = -EFAULT; + } else { + if (wmi_get_wow_list_cmd(ar->arWmi, + &getWowList) != A_OK) + { + ret = -EIO; + } + } + break; + } + case AR6000_XIOCTL_WMI_ADD_WOW_PATTERN: + { +#define WOW_PATTERN_SIZE 64 +#define WOW_MASK_SIZE 64 + + WMI_ADD_WOW_PATTERN_CMD cmd; + A_UINT8 mask_data[WOW_PATTERN_SIZE]={0}; + A_UINT8 pattern_data[WOW_PATTERN_SIZE]={0}; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else { + + if(copy_from_user(&cmd, userdata, + sizeof(WMI_ADD_WOW_PATTERN_CMD))) + return -EFAULT; + if (copy_from_user(pattern_data, + userdata + 3, + cmd.filter_size)){ + ret = -EFAULT; + break; + } + if (copy_from_user(mask_data, + (userdata + 3 + cmd.filter_size), + cmd.filter_size)){ + ret = -EFAULT; + break; + } else { + if (wmi_add_wow_pattern_cmd(ar->arWmi, + &cmd, pattern_data, mask_data, cmd.filter_size) != A_OK){ + ret = -EIO; + } + } + } +#undef WOW_PATTERN_SIZE +#undef WOW_MASK_SIZE + break; + } + case AR6000_XIOCTL_WMI_DEL_WOW_PATTERN: + { + WMI_DEL_WOW_PATTERN_CMD delWowPattern; + + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&delWowPattern, userdata, + sizeof(delWowPattern))) + { + ret = -EFAULT; + } else { + if (wmi_del_wow_pattern_cmd(ar->arWmi, + &delWowPattern) != A_OK) + { + ret = -EIO; + } + } + break; + } + case AR6000_XIOCTL_DUMP_HTC_CREDIT_STATE: + if (ar->arHtcTarget != NULL) { + HTCDumpCreditStates(ar->arHtcTarget); + } + break; + case AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE: + if (ar->arHtcTarget != NULL) { + struct ar6000_traffic_activity_change data; + + if (copy_from_user(&data, userdata, sizeof(data))) + { + return -EFAULT; + } + /* note, this is used for testing (mbox ping testing), indicate activity + * change using the stream ID as the traffic class */ + ar6000_indicate_tx_activity(ar, + (A_UINT8)data.StreamID, + data.Active ? TRUE : FALSE); + } + break; + case AR6000_XIOCTL_WMI_SET_CONNECT_CTRL_FLAGS: + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&connectCtrlFlags, userdata, + sizeof(connectCtrlFlags))) + { + ret = -EFAULT; + } else { + ar->arConnectCtrlFlags = connectCtrlFlags; + } + break; + case AR6000_XIOCTL_WMI_SET_AKMP_PARAMS: + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else if (copy_from_user(&akmpParams, userdata, + sizeof(WMI_SET_AKMP_PARAMS_CMD))) + { + ret = -EFAULT; + } else { + if (wmi_set_akmp_params_cmd(ar->arWmi, &akmpParams) != A_OK) { + ret = -EIO; + } + } + break; + case AR6000_XIOCTL_WMI_SET_PMKID_LIST: + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else { + if (copy_from_user(&pmkidInfo.numPMKID, userdata, + sizeof(pmkidInfo.numPMKID))) + { + ret = -EFAULT; + break; + } + if (copy_from_user(&pmkidInfo.pmkidList, + userdata + sizeof(pmkidInfo.numPMKID), + pmkidInfo.numPMKID * sizeof(WMI_PMKID))) + { + ret = -EFAULT; + break; + } + if (wmi_set_pmkid_list_cmd(ar->arWmi, &pmkidInfo) != A_OK) { + ret = -EIO; + } + } + break; + case AR6000_XIOCTL_WMI_GET_PMKID_LIST: + if (ar->arWmiReady == FALSE) { + ret = -EIO; + } else { + if (wmi_get_pmkid_list_cmd(ar->arWmi) != A_OK) { + ret = -EIO; + } + } + break; + default: + ret = -EOPNOTSUPP; + } + return ret; +} + diff --git a/drivers/ar6000/ar6000/netbuf.c b/drivers/ar6000/ar6000/netbuf.c new file mode 100644 index 00000000000..97b273b3ac1 --- /dev/null +++ b/drivers/ar6000/ar6000/netbuf.c @@ -0,0 +1,225 @@ + +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ +#include <linux/kernel.h> +#include <linux/skbuff.h> +#include <a_config.h> +#include "athdefs.h" +#include "a_types.h" +#include "a_osapi.h" +#include "htc_packet.h" + +#define AR6000_DATA_OFFSET 64 + +void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt) +{ + skb_queue_tail((struct sk_buff_head *) q, (struct sk_buff *) pkt); +} + +void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt) +{ + skb_queue_head((struct sk_buff_head *) q, (struct sk_buff *) pkt); +} + +void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q) +{ + return((void *) skb_dequeue((struct sk_buff_head *) q)); +} + +int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q) +{ + return(skb_queue_len((struct sk_buff_head *) q)); +} + +int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q) +{ + return(skb_queue_empty((struct sk_buff_head *) q)); +} + +void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q) +{ + skb_queue_head_init((struct sk_buff_head *) q); +} + +void * +a_netbuf_alloc(int size) +{ + struct sk_buff *skb; + skb = dev_alloc_skb(AR6000_DATA_OFFSET + sizeof(HTC_PACKET) + size); + skb_reserve(skb, AR6000_DATA_OFFSET + sizeof(HTC_PACKET)); + return ((void *)skb); +} + +/* + * Allocate an SKB w.o. any encapsulation requirement. + */ +void * +a_netbuf_alloc_raw(int size) +{ + struct sk_buff *skb; + + skb = dev_alloc_skb(size); + + return ((void *)skb); +} + +void +a_netbuf_free(void *bufPtr) +{ + struct sk_buff *skb = (struct sk_buff *)bufPtr; + + dev_kfree_skb(skb); +} + +A_UINT32 +a_netbuf_to_len(void *bufPtr) +{ + return (((struct sk_buff *)bufPtr)->len); +} + +void * +a_netbuf_to_data(void *bufPtr) +{ + return (((struct sk_buff *)bufPtr)->data); +} + +/* + * Add len # of bytes to the beginning of the network buffer + * pointed to by bufPtr + */ +A_STATUS +a_netbuf_push(void *bufPtr, A_INT32 len) +{ + skb_push((struct sk_buff *)bufPtr, len); + + return A_OK; +} + +/* + * Add len # of bytes to the beginning of the network buffer + * pointed to by bufPtr and also fill with data + */ +A_STATUS +a_netbuf_push_data(void *bufPtr, char *srcPtr, A_INT32 len) +{ + skb_push((struct sk_buff *) bufPtr, len); + A_MEMCPY(((struct sk_buff *)bufPtr)->data, srcPtr, len); + + return A_OK; +} + +/* + * Add len # of bytes to the end of the network buffer + * pointed to by bufPtr + */ +A_STATUS +a_netbuf_put(void *bufPtr, A_INT32 len) +{ + skb_put((struct sk_buff *)bufPtr, len); + + return A_OK; +} + +/* + * Add len # of bytes to the end of the network buffer + * pointed to by bufPtr and also fill with data + */ +A_STATUS +a_netbuf_put_data(void *bufPtr, char *srcPtr, A_INT32 len) +{ + char *start = ((struct sk_buff *)bufPtr)->data + + ((struct sk_buff *)bufPtr)->len; + skb_put((struct sk_buff *)bufPtr, len); + A_MEMCPY(start, srcPtr, len); + + return A_OK; +} + + +/* + * Trim the network buffer pointed to by bufPtr to len # of bytes + */ +A_STATUS +a_netbuf_setlen(void *bufPtr, A_INT32 len) +{ + skb_trim((struct sk_buff *)bufPtr, len); + + return A_OK; +} + +/* + * Chop of len # of bytes from the end of the buffer. + */ +A_STATUS +a_netbuf_trim(void *bufPtr, A_INT32 len) +{ + skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len); + + return A_OK; +} + +/* + * Chop of len # of bytes from the end of the buffer and return the data. + */ +A_STATUS +a_netbuf_trim_data(void *bufPtr, char *dstPtr, A_INT32 len) +{ + char *start = ((struct sk_buff *)bufPtr)->data + + (((struct sk_buff *)bufPtr)->len - len); + + A_MEMCPY(dstPtr, start, len); + skb_trim((struct sk_buff *)bufPtr, ((struct sk_buff *)bufPtr)->len - len); + + return A_OK; +} + + +/* + * Returns the number of bytes available to a a_netbuf_push() + */ +A_INT32 +a_netbuf_headroom(void *bufPtr) +{ + return (skb_headroom((struct sk_buff *)bufPtr)); +} + +/* + * Removes specified number of bytes from the beginning of the buffer + */ +A_STATUS +a_netbuf_pull(void *bufPtr, A_INT32 len) +{ + skb_pull((struct sk_buff *)bufPtr, len); + + return A_OK; +} + +/* + * Removes specified number of bytes from the beginning of the buffer + * and return the data + */ +A_STATUS +a_netbuf_pull_data(void *bufPtr, char *dstPtr, A_INT32 len) +{ + A_MEMCPY(dstPtr, ((struct sk_buff *)bufPtr)->data, len); + skb_pull((struct sk_buff *)bufPtr, len); + + return A_OK; +} + diff --git a/drivers/ar6000/ar6000/osapi_linux.h b/drivers/ar6000/ar6000/osapi_linux.h new file mode 100644 index 00000000000..5b64212a27c --- /dev/null +++ b/drivers/ar6000/ar6000/osapi_linux.h @@ -0,0 +1,319 @@ +/* + * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/osapi_linux.h#1 $ + * + * This file contains the definitions of the basic atheros data types. + * It is used to map the data types in atheros files to a platform specific + * type. + * + * Copyright 2003-2005 Atheros Communications, Inc., All Rights Reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifndef _OSAPI_LINUX_H_ +#define _OSAPI_LINUX_H_ + +#ifdef __KERNEL__ + +#include <linux/version.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/skbuff.h> +#include <linux/netdevice.h> +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) +#include <linux/jiffies.h> +#endif +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/wait.h> +#ifdef KERNEL_2_4 +#include <asm/arch/irq.h> +#include <asm/irq.h> +#endif + +#ifdef __GNUC__ +#define __ATTRIB_PACK __attribute__ ((packed)) +#define __ATTRIB_PRINTF __attribute__ ((format (printf, 1, 2))) +#define __ATTRIB_NORETURN __attribute__ ((noreturn)) +#ifndef INLINE +#define INLINE __inline__ +#endif +#else /* Not GCC */ +#define __ATTRIB_PACK +#define __ATTRIB_PRINTF +#define __ATTRIB_NORETURN +#ifndef INLINE +#define INLINE __inline +#endif +#endif /* End __GNUC__ */ + +#define PREPACK +#define POSTPACK __ATTRIB_PACK + +/* + * Endianes macros + */ +#define A_BE2CPU8(x) ntohb(x) +#define A_BE2CPU16(x) ntohs(x) +#define A_BE2CPU32(x) ntohl(x) + +#define A_LE2CPU8(x) (x) +#define A_LE2CPU16(x) (x) +#define A_LE2CPU32(x) (x) + +#define A_CPU2BE8(x) htonb(x) +#define A_CPU2BE16(x) htons(x) +#define A_CPU2BE32(x) htonl(x) + +#define A_MEMCPY(dst, src, len) memcpy((A_UINT8 *)(dst), (src), (len)) +#define A_MEMZERO(addr, len) memset(addr, 0, len) +#define A_MEMCMP(addr1, addr2, len) memcmp((addr1), (addr2), (len)) +#define A_MALLOC(size) kmalloc((size), GFP_KERNEL) +#define A_MALLOC_NOWAIT(size) kmalloc((size), GFP_ATOMIC) +#define A_FREE(addr) kfree(addr) +#define A_PRINTF(args...) printk(args) + +/* Mutual Exclusion */ +typedef spinlock_t A_MUTEX_T; +#define A_MUTEX_INIT(mutex) spin_lock_init(mutex) +#define A_MUTEX_LOCK(mutex) spin_lock_bh(mutex) +#define A_MUTEX_UNLOCK(mutex) spin_unlock_bh(mutex) +#define A_IS_MUTEX_VALID(mutex) TRUE /* okay to return true, since A_MUTEX_DELETE does nothing */ +#define A_MUTEX_DELETE(mutex) /* spin locks are not kernel resources so nothing to free.. */ + +/* Get current time in ms adding a constant offset (in ms) */ +#define A_GET_MS(offset) \ + (jiffies + ((offset) / 1000) * HZ) + +/* + * Timer Functions + */ +#define A_MDELAY(msecs) mdelay(msecs) +typedef struct timer_list A_TIMER; + +#define A_INIT_TIMER(pTimer, pFunction, pArg) do { \ + init_timer(pTimer); \ + (pTimer)->function = (pFunction); \ + (pTimer)->data = (unsigned long)(pArg); \ +} while (0) + +/* + * Start a Timer that elapses after 'periodMSec' milli-seconds + * Support is provided for a one-shot timer. The 'repeatFlag' is + * ignored. + */ +#define A_TIMEOUT_MS(pTimer, periodMSec, repeatFlag) do { \ + if (repeatFlag) { \ + printk("\n" __FILE__ ":%d: Timer Repeat requested\n",__LINE__); \ + panic("Timer Repeat"); \ + } \ + mod_timer((pTimer), jiffies + HZ * (periodMSec) / 1000); \ +} while (0) + +/* + * Cancel the Timer. + */ +#define A_UNTIMEOUT(pTimer) do { \ + del_timer((pTimer)); \ +} while (0) + +#define A_DELETE_TIMER(pTimer) do { \ +} while (0) + +/* + * Wait Queue related functions + */ +typedef wait_queue_head_t A_WAITQUEUE_HEAD; +#define A_INIT_WAITQUEUE_HEAD(head) init_waitqueue_head(head) +#ifndef wait_event_interruptible_timeout +#define __wait_event_interruptible_timeout(wq, condition, ret) \ +do { \ + wait_queue_t __wait; \ + init_waitqueue_entry(&__wait, current); \ + \ + add_wait_queue(&wq, &__wait); \ + for (;;) { \ + set_current_state(TASK_INTERRUPTIBLE); \ + if (condition) \ + break; \ + if (!signal_pending(current)) { \ + ret = schedule_timeout(ret); \ + if (!ret) \ + break; \ + continue; \ + } \ + ret = -ERESTARTSYS; \ + break; \ + } \ + current->state = TASK_RUNNING; \ + remove_wait_queue(&wq, &__wait); \ +} while (0) + +#define wait_event_interruptible_timeout(wq, condition, timeout) \ +({ \ + long __ret = timeout; \ + if (!(condition)) \ + __wait_event_interruptible_timeout(wq, condition, __ret); \ + __ret; \ +}) +#endif /* wait_event_interruptible_timeout */ + +#define A_WAIT_EVENT_INTERRUPTIBLE_TIMEOUT(head, condition, timeout) do { \ + wait_event_interruptible_timeout(head, condition, timeout); \ +} while (0) + +#define A_WAKE_UP(head) wake_up(head) + +#ifdef DEBUG +#define A_ASSERT(expr) \ + if (!(expr)) { \ + printk(KERN_ALERT "\n" __FILE__ ":%d: Assertion " #expr " failed!\n",__LINE__); \ + panic(#expr); \ + } + +#else +#define A_ASSERT(expr) +#endif /* DEBUG */ + +/* + * Initialization of the network buffer subsystem + */ +#define A_NETBUF_INIT() + +/* + * Network buffer queue support + */ +typedef struct sk_buff_head A_NETBUF_QUEUE_T; + +#define A_NETBUF_QUEUE_INIT(q) \ + a_netbuf_queue_init(q) + +#define A_NETBUF_ENQUEUE(q, pkt) \ + a_netbuf_enqueue((q), (pkt)) +#define A_NETBUF_PREQUEUE(q, pkt) \ + a_netbuf_prequeue((q), (pkt)) +#define A_NETBUF_DEQUEUE(q) \ + (a_netbuf_dequeue(q)) +#define A_NETBUF_QUEUE_SIZE(q) \ + a_netbuf_queue_size(q) +#define A_NETBUF_QUEUE_EMPTY(q) \ + a_netbuf_queue_empty(q) + +/* + * Network buffer support + */ +#define A_NETBUF_ALLOC(size) \ + a_netbuf_alloc(size) +#define A_NETBUF_ALLOC_RAW(size) \ + a_netbuf_alloc_raw(size) +#define A_NETBUF_FREE(bufPtr) \ + a_netbuf_free(bufPtr) +#define A_NETBUF_DATA(bufPtr) \ + a_netbuf_to_data(bufPtr) +#define A_NETBUF_LEN(bufPtr) \ + a_netbuf_to_len(bufPtr) +#define A_NETBUF_PUSH(bufPtr, len) \ + a_netbuf_push(bufPtr, len) +#define A_NETBUF_PUT(bufPtr, len) \ + a_netbuf_put(bufPtr, len) +#define A_NETBUF_TRIM(bufPtr,len) \ + a_netbuf_trim(bufPtr, len) +#define A_NETBUF_PULL(bufPtr, len) \ + a_netbuf_pull(bufPtr, len) +#define A_NETBUF_HEADROOM(bufPtr)\ + a_netbuf_headroom(bufPtr) +#define A_NETBUF_SETLEN(bufPtr,len) \ + a_netbuf_setlen(bufPtr, len) + +/* Add data to end of a buffer */ +#define A_NETBUF_PUT_DATA(bufPtr, srcPtr, len) \ + a_netbuf_put_data(bufPtr, srcPtr, len) + +/* Add data to start of the buffer */ +#define A_NETBUF_PUSH_DATA(bufPtr, srcPtr, len) \ + a_netbuf_push_data(bufPtr, srcPtr, len) + +/* Remove data at start of the buffer */ +#define A_NETBUF_PULL_DATA(bufPtr, dstPtr, len) \ + a_netbuf_pull_data(bufPtr, dstPtr, len) + +/* Remove data from the end of the buffer */ +#define A_NETBUF_TRIM_DATA(bufPtr, dstPtr, len) \ + a_netbuf_trim_data(bufPtr, dstPtr, len) + +/* View data as "size" contiguous bytes of type "t" */ +#define A_NETBUF_VIEW_DATA(bufPtr, t, size) \ + (t )( ((struct skbuf *)(bufPtr))->data) + +/* return the beginning of the headroom for the buffer */ +#define A_NETBUF_HEAD(bufPtr) \ + ((((struct sk_buff *)(bufPtr))->head)) + +/* + * OS specific network buffer access routines + */ +void *a_netbuf_alloc(int size); +void *a_netbuf_alloc_raw(int size); +void a_netbuf_free(void *bufPtr); +void *a_netbuf_to_data(void *bufPtr); +A_UINT32 a_netbuf_to_len(void *bufPtr); +A_STATUS a_netbuf_push(void *bufPtr, A_INT32 len); +A_STATUS a_netbuf_push_data(void *bufPtr, char *srcPtr, A_INT32 len); +A_STATUS a_netbuf_put(void *bufPtr, A_INT32 len); +A_STATUS a_netbuf_put_data(void *bufPtr, char *srcPtr, A_INT32 len); +A_STATUS a_netbuf_pull(void *bufPtr, A_INT32 len); +A_STATUS a_netbuf_pull_data(void *bufPtr, char *dstPtr, A_INT32 len); +A_STATUS a_netbuf_trim(void *bufPtr, A_INT32 len); +A_STATUS a_netbuf_trim_data(void *bufPtr, char *dstPtr, A_INT32 len); +A_STATUS a_netbuf_setlen(void *bufPtr, A_INT32 len); +A_INT32 a_netbuf_headroom(void *bufPtr); +void a_netbuf_enqueue(A_NETBUF_QUEUE_T *q, void *pkt); +void a_netbuf_prequeue(A_NETBUF_QUEUE_T *q, void *pkt); +void *a_netbuf_dequeue(A_NETBUF_QUEUE_T *q); +int a_netbuf_queue_size(A_NETBUF_QUEUE_T *q); +int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q); +int a_netbuf_queue_empty(A_NETBUF_QUEUE_T *q); +void a_netbuf_queue_init(A_NETBUF_QUEUE_T *q); + +/* + * Kernel v.s User space functions + */ +A_UINT32 a_copy_to_user(void *to, const void *from, A_UINT32 n); +A_UINT32 a_copy_from_user(void *to, const void *from, A_UINT32 n); + +#else /* __KERNEL__ */ + +#ifdef __GNUC__ +#define __ATTRIB_PACK __attribute__ ((packed)) +#define __ATTRIB_PRINTF __attribute__ ((format (printf, 1, 2))) +#define __ATTRIB_NORETURN __attribute__ ((noreturn)) +#ifndef INLINE +#define INLINE __inline__ +#endif +#else /* Not GCC */ +#define __ATTRIB_PACK +#define __ATTRIB_PRINTF +#define __ATTRIB_NORETURN +#ifndef INLINE +#define INLINE __inline +#endif +#endif /* End __GNUC__ */ + +#define PREPACK +#define POSTPACK __ATTRIB_PACK + +#endif /* __KERNEL__ */ + +#endif /* _OSAPI_LINUX_H_ */ diff --git a/drivers/ar6000/ar6000/wireless_ext.c b/drivers/ar6000/ar6000/wireless_ext.c new file mode 100644 index 00000000000..af78ae05fcb --- /dev/null +++ b/drivers/ar6000/ar6000/wireless_ext.c @@ -0,0 +1,1979 @@ +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "ar6000_drv.h" + +static A_UINT8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; +static void ar6000_set_quality(struct iw_quality *iq, A_INT8 rssi); +extern unsigned int wmitimeout; +extern A_WAITQUEUE_HEAD arEvent; +extern wait_queue_head_t ar6000_scan_queue; + +/* + * Encode a WPA or RSN information element as a custom + * element using the hostap format. + */ +static u_int +encode_ie(void *buf, size_t bufsize, + const u_int8_t *ie, size_t ielen, + const char *leader, size_t leader_len) +{ + u_int8_t *p; + int i; + + if (bufsize < leader_len) + return 0; + p = buf; + memcpy(p, leader, leader_len); + bufsize -= leader_len; + p += leader_len; + for (i = 0; i < ielen && bufsize > 2; i++) + p += sprintf(p, "%02x", ie[i]); + return (i == ielen ? p - (u_int8_t *)buf : 0); +} + +void +ar6000_scan_node(void *arg, bss_t *ni) +{ + struct iw_event iwe; +#if WIRELESS_EXT > 14 + char buf[64*2 + 30]; +#endif + struct ar_giwscan_param *param; + A_CHAR *current_ev; + A_CHAR *end_buf; + struct ieee80211_common_ie *cie; + struct iw_request_info info; + + info.cmd = 0; + info.flags = 0; + + param = (struct ar_giwscan_param *)arg; + + if (param->current_ev >= param->end_buf) { + return; + } + if ((param->firstPass == TRUE) && + ((ni->ni_cie.ie_wpa == NULL) && (ni->ni_cie.ie_rsn == NULL))) { + /* + * Only forward wpa bss's in first pass + */ + return; + } + + if ((param->firstPass == FALSE) && + ((ni->ni_cie.ie_wpa != NULL) || (ni->ni_cie.ie_rsn != NULL))) { + /* + * Only forward non-wpa bss's in 2nd pass + */ + return; + } + + current_ev = param->current_ev; + end_buf = param->end_buf; + + cie = &ni->ni_cie; + + A_MEMZERO(&iwe, sizeof(iwe)); + iwe.cmd = SIOCGIWAP; + iwe.u.ap_addr.sa_family = ARPHRD_ETHER; + A_MEMCPY(iwe.u.ap_addr.sa_data, ni->ni_macaddr, 6); + current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe, + IW_EV_ADDR_LEN); + + A_MEMZERO(&iwe, sizeof(iwe)); + iwe.cmd = SIOCGIWESSID; + iwe.u.data.flags = 1; + iwe.u.data.length = cie->ie_ssid[1]; + current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, + &cie->ie_ssid[2]); + + if (cie->ie_capInfo & (IEEE80211_CAPINFO_ESS|IEEE80211_CAPINFO_IBSS)) { + A_MEMZERO(&iwe, sizeof(iwe)); + iwe.cmd = SIOCGIWMODE; + iwe.u.mode = cie->ie_capInfo & IEEE80211_CAPINFO_ESS ? + IW_MODE_MASTER : IW_MODE_ADHOC; + current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe, + IW_EV_UINT_LEN); + } + + A_MEMZERO(&iwe, sizeof(iwe)); + iwe.cmd = SIOCGIWFREQ; + iwe.u.freq.m = cie->ie_chan * 100000; + iwe.u.freq.e = 1; + current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe, + IW_EV_FREQ_LEN); + + A_MEMZERO(&iwe, sizeof(iwe)); + iwe.cmd = IWEVQUAL; + ar6000_set_quality(&iwe.u.qual, ni->ni_snr); + current_ev = iwe_stream_add_event(&info, current_ev, end_buf, &iwe, + IW_EV_QUAL_LEN); + + A_MEMZERO(&iwe, sizeof(iwe)); + iwe.cmd = SIOCGIWENCODE; + if (cie->ie_capInfo & IEEE80211_CAPINFO_PRIVACY) { + iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; + } else { + iwe.u.data.flags = IW_ENCODE_DISABLED; + } + iwe.u.data.length = 0; + current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, ""); + + A_MEMZERO(&iwe, sizeof(iwe)); + iwe.cmd = IWEVCUSTOM; + snprintf(buf, sizeof(buf), "bcn_int=%d", cie->ie_beaconInt); + iwe.u.data.length = strlen(buf); + current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, buf); + + if (cie->ie_wpa != NULL) { + static const char wpa_leader[] = "wpa_ie="; + + A_MEMZERO(&iwe, sizeof(iwe)); + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_wpa, + cie->ie_wpa[1]+2, + wpa_leader, sizeof(wpa_leader)-1); + + if (iwe.u.data.length != 0) { + current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, + buf); + } + } + + if (cie->ie_rsn != NULL && cie->ie_rsn[0] == IEEE80211_ELEMID_RSN) { + static const char rsn_leader[] = "rsn_ie="; + + A_MEMZERO(&iwe, sizeof(iwe)); + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_rsn, + cie->ie_rsn[1]+2, + rsn_leader, sizeof(rsn_leader)-1); + + if (iwe.u.data.length != 0) { + current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, + buf); + } + } + + if (cie->ie_wmm != NULL) { + static const char wmm_leader[] = "wmm_ie="; + + A_MEMZERO(&iwe, sizeof(iwe)); + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_wmm, + cie->ie_wmm[1]+2, + wmm_leader, sizeof(wmm_leader)-1); + if (iwe.u.data.length != 0) { + current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, + buf); + } + } + + if (cie->ie_ath != NULL) { + static const char ath_leader[] = "ath_ie="; + + A_MEMZERO(&iwe, sizeof(iwe)); + iwe.cmd = IWEVCUSTOM; + iwe.u.data.length = encode_ie(buf, sizeof(buf), cie->ie_ath, + cie->ie_ath[1]+2, + ath_leader, sizeof(ath_leader)-1); + if (iwe.u.data.length != 0) { + current_ev = iwe_stream_add_point(&info, current_ev, end_buf, &iwe, + buf); + } + } + + param->current_ev = current_ev; +} + +int +ar6000_ioctl_giwscan(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + struct ar_giwscan_param param; + int i; + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + param.current_ev = extra; + param.end_buf = extra + IW_SCAN_MAX_DATA; + param.firstPass = TRUE; + + /* + * Do two passes to insure WPA scan candidates + * are sorted to the front. This is a hack to deal with + * the wireless extensions capping scan results at + * IW_SCAN_MAX_DATA bytes. In densely populated environments + * it's easy to overflow this buffer (especially with WPA/RSN + * information elements). Note this sorting hack does not + * guarantee we won't overflow anyway. + */ + for (i = 0; i < 2; i++) { + /* + * Translate data to WE format. + */ + wmi_iterate_nodes(ar->arWmi, ar6000_scan_node, ¶m); + param.firstPass = FALSE; + if (param.current_ev >= param.end_buf) { + data->length = param.current_ev - extra; + return -E2BIG; + } + } + + data->length = param.current_ev - extra; + return 0; +} + +extern int reconnect_flag; +/* SIOCSIWESSID */ +static int +ar6000_ioctl_siwessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *ssid) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + A_STATUS status; + A_UINT8 arNetworkType; + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + /* + * iwconfig passes a string with length excluding any trailing NUL. + * FIXME: we should be able to set an ESSID of 32 bytes, yet things fall + * over badly if we do. So we limit the ESSID to 31 bytes. + */ + if (data->flags && (!data->length || data->length >= sizeof(ar->arSsid))) { + /* + * ssid is invalid + */ + return -EINVAL; + } + /* Added for bug 25178, return an IOCTL error instead of target returning + Illegal parameter error when either the BSSID or channel is missing + and we cannot scan during connect. + */ + if (data->flags) { + if (ar->arSkipScan == TRUE && + (ar->arChannelHint == 0 || + (!ar->arReqBssid[0] && !ar->arReqBssid[1] && !ar->arReqBssid[2] && + !ar->arReqBssid[3] && !ar->arReqBssid[4] && !ar->arReqBssid[5]))) + { + return -EINVAL; + } + } + + if (down_interruptible(&ar->arSem)) { + return -ERESTARTSYS; + } + + if (ar->arTxPending[WMI_CONTROL_PRI]) { + /* + * sleep until the command queue drains + */ + wait_event_interruptible_timeout(arEvent, + ar->arTxPending[WMI_CONTROL_PRI] == 0, wmitimeout * HZ); + if (signal_pending(current)) { + return -EINTR; + } + } + + if (!data->flags) { + arNetworkType = ar->arNetworkType; + ar6000_init_profile_info(ar); + ar->arNetworkType = arNetworkType; + } + + /* + * The original logic here prevented a disconnect if issuing an "essid off" + * if no ESSID was set, presumably to prevent sending multiple disconnects + * to the WMI. + * + * Unfortunately, this also meant that no disconnect was sent when we were + * already connected, but the profile has been changed since (which also + * clears the ESSID as a reminder that the WMI needs updating.) + * + * The "1 ||" makes sure we always disconnect or reconnect. The WMI doesn't + * seem to mind being sent multiple disconnects. + */ + if (1 || (ar->arSsidLen) || (!data->flags)) + { + if ((!data->flags) || + (A_MEMCMP(ar->arSsid, ssid, ar->arSsidLen) != 0) || + (ar->arSsidLen != (data->length))) + { + /* + * SSID set previously or essid off has been issued. + * + * Disconnect Command is issued in two cases after wmi is ready + * (1) ssid is different from the previous setting + * (2) essid off has been issued + * + */ + if (ar->arWmiReady == TRUE) { + reconnect_flag = 0; + status = wmi_disconnect_cmd(ar->arWmi); + A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); + ar->arSsidLen = 0; + if (ar->arSkipScan == FALSE) { + A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid)); + } + if (!data->flags) { + up(&ar->arSem); + return 0; + } + } else { + up(&ar->arSem); + } + } + else + { + /* + * SSID is same, so we assume profile hasn't changed. + * If the interface is up and wmi is ready, we issue + * a reconnect cmd. Issue a reconnect only we are already + * connected. + */ + if((ar->arConnected == TRUE) && (ar->arWmiReady == TRUE)) + { + reconnect_flag = TRUE; + status = wmi_reconnect_cmd(ar->arWmi,ar->arReqBssid, + ar->arChannelHint); + up(&ar->arSem); + if (status != A_OK) { + return -EIO; + } + return 0; + } + else{ + /* + * Dont return if connect is pending. + */ + if(!(ar->arConnectPending)) { + up(&ar->arSem); + return 0; + } + } + } + } + + ar->arSsidLen = data->length; + A_MEMCPY(ar->arSsid, ssid, ar->arSsidLen); + + /* The ssid length check prevents second "essid off" from the user, + to be treated as a connect cmd. The second "essid off" is ignored. + */ + if((ar->arWmiReady == TRUE) && (ar->arSsidLen > 0) ) + { + AR6000_SPIN_LOCK(&ar->arLock, 0); + if (SHARED_AUTH == ar->arDot11AuthMode) { + ar6000_install_static_wep_keys(ar); + } + AR_DEBUG_PRINTF("Connect called with authmode %d dot11 auth %d"\ + " PW crypto %d PW crypto Len %d GRP crypto %d"\ + " GRP crypto Len %d\n", + ar->arAuthMode, ar->arDot11AuthMode, + ar->arPairwiseCrypto, ar->arPairwiseCryptoLen, + ar->arGroupCrypto, ar->arGroupCryptoLen); + reconnect_flag = 0; + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + status = wmi_connect_cmd(ar->arWmi, ar->arNetworkType, + ar->arDot11AuthMode, ar->arAuthMode, + ar->arPairwiseCrypto, ar->arPairwiseCryptoLen, + ar->arGroupCrypto,ar->arGroupCryptoLen, + ar->arSsidLen, ar->arSsid, + ar->arReqBssid, ar->arChannelHint, + ar->arConnectCtrlFlags); + + + up(&ar->arSem); + + if (status != A_OK) { + return -EIO; + } + ar->arConnectPending = TRUE; + }else{ + up(&ar->arSem); + } + return 0; +} + +/* SIOCGIWESSID */ +static int +ar6000_ioctl_giwessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *essid) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + data->flags = 1; + data->length = ar->arSsidLen; + A_MEMCPY(essid, ar->arSsid, ar->arSsidLen); + + return 0; +} + + +void ar6000_install_static_wep_keys(AR_SOFTC_T *ar) +{ + A_UINT8 index; + A_UINT8 keyUsage; + + for (index = WMI_MIN_KEY_INDEX; index <= WMI_MAX_KEY_INDEX; index++) { + if (ar->arWepKeyList[index].arKeyLen) { + keyUsage = GROUP_USAGE; + if (index == ar->arDefTxKeyIndex) { + keyUsage |= TX_USAGE; + } + wmi_addKey_cmd(ar->arWmi, + index, + WEP_CRYPT, + keyUsage, + ar->arWepKeyList[index].arKeyLen, + NULL, + ar->arWepKeyList[index].arKey, KEY_OP_INIT_VAL, + NO_SYNC_WMIFLAG); + } + } +} + +int +ar6000_ioctl_delkey(struct net_device *dev, struct iw_request_info *info, + void *w, char *extra) +{ + return 0; +} + +int +ar6000_ioctl_setmlme(struct net_device *dev, struct iw_request_info *info, + void *w, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + struct ieee80211req_mlme *mlme = (struct ieee80211req_mlme *)extra; + + if ((ar->arWmiReady == FALSE) || (ar->arConnected != TRUE)) + return -EIO; + + switch (mlme->im_op) { + case IEEE80211_MLME_DISASSOC: + case IEEE80211_MLME_DEAUTH: + /* Not Supported */ + break; + default: + break; + } + return 0; +} + + +int +ar6000_ioctl_setwmmparams(struct net_device *dev, struct iw_request_info *info, + void *w, char *extra) +{ + return -EIO; /* for now */ +} + +int +ar6000_ioctl_getwmmparams(struct net_device *dev, struct iw_request_info *info, + void *w, char *extra) +{ + return -EIO; /* for now */ +} + +int ar6000_ioctl_setoptie(struct net_device *dev, struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + /* The target generates the WPA/RSN IE */ + return 0; +} + +int +ar6000_ioctl_setauthalg(struct net_device *dev, struct iw_request_info *info, + void *w, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + struct ieee80211req_authalg *req = (struct ieee80211req_authalg *)extra; + int ret = 0; + + + AR6000_SPIN_LOCK(&ar->arLock, 0); + + if (req->auth_alg == AUTH_ALG_OPEN_SYSTEM) { + ar->arDot11AuthMode = OPEN_AUTH; + } else if (req->auth_alg == AUTH_ALG_LEAP) { + ar->arDot11AuthMode = LEAP_AUTH; + ar->arPairwiseCrypto = WEP_CRYPT; + ar->arGroupCrypto = WEP_CRYPT; + } else { + ret = -EIO; + } + + AR6000_SPIN_UNLOCK(&ar->arLock, 0); + + return ret; +} +static int +ar6000_ioctl_addpmkid(struct net_device *dev, struct iw_request_info *info, + void *w, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + struct ieee80211req_addpmkid *req = (struct ieee80211req_addpmkid *)extra; + A_STATUS status; + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + AR_DEBUG_PRINTF("Add pmkid for %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x en=%d\n", + req->pi_bssid[0], req->pi_bssid[1], req->pi_bssid[2], + req->pi_bssid[3], req->pi_bssid[4], req->pi_bssid[5], + req->pi_enable); + + status = wmi_setPmkid_cmd(ar->arWmi, req->pi_bssid, req->pi_pmkid, + req->pi_enable); + + if (status != A_OK) { + return -EIO; + } + + return 0; +} + +/* + * SIOCSIWRATE + */ +int +ar6000_ioctl_siwrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + A_UINT32 kbps; + + if (rrq->fixed) { + kbps = rrq->value / 1000; /* rrq->value is in bps */ + } else { + kbps = -1; /* -1 indicates auto rate */ + } + if(kbps != -1 && wmi_validate_bitrate(ar->arWmi, kbps) == A_EINVAL) + { + AR_DEBUG_PRINTF("BitRate is not Valid %d\n", kbps); + return -EINVAL; + } + ar->arBitRate = kbps; + if(ar->arWmiReady == TRUE) + { + if (wmi_set_bitrate_cmd(ar->arWmi, kbps) != A_OK) { + return -EINVAL; + } + } + return 0; +} + +/* + * SIOCGIWRATE + */ +int +ar6000_ioctl_giwrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + int ret = 0; + + if (down_interruptible(&ar->arSem)) { + return -ERESTARTSYS; + } + if(ar->arWmiReady == TRUE) + { + ar->arBitRate = 0xFFFF; + if (wmi_get_bitrate_cmd(ar->arWmi) != A_OK) { + up(&ar->arSem); + return -EIO; + } + wait_event_interruptible_timeout(arEvent, ar->arBitRate != 0xFFFF, wmitimeout * HZ); + if (signal_pending(current)) { + ret = -EINTR; + } + } + /* If the interface is down or wmi is not ready or the target is not + connected - return the value stored in the device structure */ + if (!ret) { + if (ar->arBitRate == -1) { + rrq->fixed = TRUE; + rrq->value = 0; + } else { + rrq->value = ar->arBitRate * 1000; + } + } + + up(&ar->arSem); + + return ret; +} + +/* + * SIOCSIWTXPOW + */ +static int +ar6000_ioctl_siwtxpow(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + A_UINT8 dbM; + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + if (ar->arRadioSwitch == WLAN_ENABLED + && rrq->disabled) { + if (wmi_switch_radio(ar->arWmi, WLAN_DISABLED) < 0) + return -EIO; + ar->arRadioSwitch = WLAN_DISABLED; + } else if (ar->arRadioSwitch == WLAN_DISABLED + && !rrq->disabled) { + if (wmi_switch_radio(ar->arWmi, WLAN_ENABLED) < 0) + return -EIO; + ar->arRadioSwitch = WLAN_ENABLED; + } + + if (rrq->fixed) { + if (rrq->flags != IW_TXPOW_DBM) { + return -EOPNOTSUPP; + } + ar->arTxPwr= dbM = rrq->value; + ar->arTxPwrSet = TRUE; + } else { + ar->arTxPwr = dbM = 0; + ar->arTxPwrSet = FALSE; + } + if(ar->arWmiReady == TRUE) + { + AR_DEBUG_PRINTF("Set tx pwr cmd %d dbM\n", dbM); + wmi_set_txPwr_cmd(ar->arWmi, dbM); + } + return 0; +} + +/* + * SIOCGIWTXPOW + */ +int +ar6000_ioctl_giwtxpow(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + int ret = 0; + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + if (ar->arRadioSwitch == WLAN_DISABLED) { + rrq->disabled = 1; + return 0; + } + + if (down_interruptible(&ar->arSem)) { + return -ERESTARTSYS; + } + if((ar->arWmiReady == TRUE) && (ar->arConnected == TRUE)) + { + ar->arTxPwr = 0; + + if (wmi_get_txPwr_cmd(ar->arWmi) != A_OK) { + up(&ar->arSem); + return -EIO; + } + + wait_event_interruptible_timeout(arEvent, ar->arTxPwr != 0, wmitimeout * HZ); + + if (signal_pending(current)) { + ret = -EINTR; + } + } + /* If the interace is down or wmi is not ready or target is not connected + then return value stored in the device structure */ + + if (!ret) { + if (ar->arTxPwrSet == TRUE) { + rrq->fixed = TRUE; + } + rrq->value = ar->arTxPwr; + rrq->flags = IW_TXPOW_DBM; + } + + up(&ar->arSem); + + return ret; +} + +/* + * SIOCSIWRETRY + * since iwconfig only provides us with one max retry value, we use it + * to apply to data frames of the BE traffic class. + */ +static int +ar6000_ioctl_siwretry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + if (rrq->disabled) { + return -EOPNOTSUPP; + } + + if ((rrq->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT) { + return -EOPNOTSUPP; + } + + if ( !(rrq->value >= WMI_MIN_RETRIES) || !(rrq->value <= WMI_MAX_RETRIES)) { + return - EINVAL; + } + if(ar->arWmiReady == TRUE) + { + if (wmi_set_retry_limits_cmd(ar->arWmi, DATA_FRAMETYPE, WMM_AC_BE, + rrq->value, 0) != A_OK){ + return -EINVAL; + } + } + ar->arMaxRetries = rrq->value; + return 0; +} + +/* + * SIOCGIWRETRY + */ +static int +ar6000_ioctl_giwretry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rrq, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + rrq->disabled = 0; + switch (rrq->flags & IW_RETRY_TYPE) { + case IW_RETRY_LIFETIME: + return -EOPNOTSUPP; + break; + case IW_RETRY_LIMIT: + rrq->flags = IW_RETRY_LIMIT; + switch (rrq->flags & IW_RETRY_MODIFIER) { + case IW_RETRY_MIN: + rrq->flags |= IW_RETRY_MIN; + rrq->value = WMI_MIN_RETRIES; + break; + case IW_RETRY_MAX: + rrq->flags |= IW_RETRY_MAX; + rrq->value = ar->arMaxRetries; + break; + } + break; + } + return 0; +} + +/* + * SIOCSIWENCODE + */ +static int +ar6000_ioctl_siwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *keybuf) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + int index; + A_INT32 auth = ar->arDot11AuthMode; + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + index = erq->flags & IW_ENCODE_INDEX; + + if (index && (((index - 1) < WMI_MIN_KEY_INDEX) || + ((index - 1) > WMI_MAX_KEY_INDEX))) + { + return -EIO; + } + + if (erq->flags & IW_ENCODE_DISABLED) { + /* + * Encryption disabled + */ + if (index) { + /* + * If key index was specified then clear the specified key + */ + index--; + A_MEMZERO(ar->arWepKeyList[index].arKey, + sizeof(ar->arWepKeyList[index].arKey)); + ar->arWepKeyList[index].arKeyLen = 0; + } + ar->arDot11AuthMode = OPEN_AUTH; + ar->arPairwiseCrypto = NONE_CRYPT; + ar->arGroupCrypto = NONE_CRYPT; + ar->arAuthMode = NONE_AUTH; + } else { + /* + * Enabling WEP encryption + */ + if (index) { + index--; /* keyindex is off base 1 in iwconfig */ + } + + if (erq->flags & IW_ENCODE_OPEN) { + auth = OPEN_AUTH; + } else if (erq->flags & IW_ENCODE_RESTRICTED) { + auth = SHARED_AUTH; + } + + if (erq->length) { + if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(erq->length)) { + return -EIO; + } + + A_MEMZERO(ar->arWepKeyList[index].arKey, + sizeof(ar->arWepKeyList[index].arKey)); + A_MEMCPY(ar->arWepKeyList[index].arKey, keybuf, erq->length); + ar->arWepKeyList[index].arKeyLen = erq->length; + } else { + if (ar->arWepKeyList[index].arKeyLen == 0) { + return -EIO; + } + ar->arDefTxKeyIndex = index; + } + + ar->arPairwiseCrypto = WEP_CRYPT; + ar->arGroupCrypto = WEP_CRYPT; + ar->arDot11AuthMode = auth; + ar->arAuthMode = NONE_AUTH; + } + + /* + * profile has changed. Erase ssid to signal change + */ + A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); + ar->arSsidLen = 0; + + return 0; +} + +static int +ar6000_ioctl_giwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *key) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + A_UINT8 keyIndex; + struct ar_wep_key *wk; + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + if (ar->arPairwiseCrypto == NONE_CRYPT) { + erq->length = 0; + erq->flags = IW_ENCODE_DISABLED; + } else { + /* get the keyIndex */ + keyIndex = erq->flags & IW_ENCODE_INDEX; + if (0 == keyIndex) { + keyIndex = ar->arDefTxKeyIndex; + } else if ((keyIndex - 1 < WMI_MIN_KEY_INDEX) || + (keyIndex - 1 > WMI_MAX_KEY_INDEX)) + { + keyIndex = WMI_MIN_KEY_INDEX; + } else { + keyIndex--; + } + erq->flags = keyIndex + 1; + erq->flags |= IW_ENCODE_ENABLED; + wk = &ar->arWepKeyList[keyIndex]; + if (erq->length > wk->arKeyLen) { + erq->length = wk->arKeyLen; + } + if (wk->arKeyLen) { + A_MEMCPY(key, wk->arKey, erq->length); + } + if (ar->arDot11AuthMode == OPEN_AUTH) { + erq->flags |= IW_ENCODE_OPEN; + } else if (ar->arDot11AuthMode == SHARED_AUTH) { + erq->flags |= IW_ENCODE_RESTRICTED; + } + } + + return 0; +} + +static int ar6000_ioctl_siwpower(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + WMI_POWER_MODE power_mode; + + if (wrqu->power.disabled) + power_mode = MAX_PERF_POWER; + else + power_mode = REC_POWER; + + if (wmi_powermode_cmd(ar->arWmi, power_mode) < 0) + return -EIO; + + return 0; +} + +static int ar6000_ioctl_giwpower(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + /* + * FIXME: + * https://docs.openmoko.org/trac/ticket/2267 + * When starting wpa_supplicant the kernel oopses. + * The following condition avoids the oops. + * Remove this comment to bless this solution. + */ + if (ar->arWlanState == WLAN_DISABLED || ar->arWmiReady == FALSE) + return -EIO; + + return wmi_get_power_mode_cmd(ar->arWmi); +} + +static int ar6000_ioctl_siwgenie(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + /* The target does that for us */ + return 0; +} + +static int ar6000_ioctl_giwgenie(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + return 0; +} + +static int ar6000_ioctl_siwauth(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *param, + char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + int reset = 0; + + switch (param->flags & IW_AUTH_INDEX) { + case IW_AUTH_WPA_VERSION: + if (param->value & IW_AUTH_WPA_VERSION_DISABLED) { + ar->arAuthMode = NONE_AUTH; + } + if (param->value & IW_AUTH_WPA_VERSION_WPA) { + ar->arAuthMode = WPA_AUTH; + } + if (param->value & IW_AUTH_WPA_VERSION_WPA2) { + ar->arAuthMode = WPA2_AUTH; + } + + reset = 1; + break; + case IW_AUTH_CIPHER_PAIRWISE: + if (param->value & IW_AUTH_CIPHER_NONE) { + ar->arPairwiseCrypto = NONE_CRYPT; + } + if (param->value & IW_AUTH_CIPHER_WEP40) { + ar->arPairwiseCrypto = WEP_CRYPT; + } + if (param->value & IW_AUTH_CIPHER_TKIP) { + ar->arPairwiseCrypto = TKIP_CRYPT; + } + if (param->value & IW_AUTH_CIPHER_CCMP) { + ar->arPairwiseCrypto = AES_CRYPT; + } + + reset = 1; + break; + case IW_AUTH_CIPHER_GROUP: + if (param->value & IW_AUTH_CIPHER_NONE) { + ar->arGroupCrypto = NONE_CRYPT; + } + if (param->value & IW_AUTH_CIPHER_WEP40) { + ar->arGroupCrypto = WEP_CRYPT; + } + if (param->value & IW_AUTH_CIPHER_TKIP) { + ar->arGroupCrypto = TKIP_CRYPT; + } + if (param->value & IW_AUTH_CIPHER_CCMP) { + ar->arGroupCrypto = AES_CRYPT; + } + + reset = 1; + break; + case IW_AUTH_KEY_MGMT: + if (param->value & IW_AUTH_KEY_MGMT_PSK) { + if (ar->arAuthMode == WPA_AUTH) { + ar->arAuthMode = WPA_PSK_AUTH; + } else if (ar->arAuthMode == WPA2_AUTH) { + ar->arAuthMode = WPA2_PSK_AUTH; + } + + reset = 1; + } + break; + + case IW_AUTH_TKIP_COUNTERMEASURES: + if (ar->arWmiReady == FALSE) { + return -EIO; + } + wmi_set_tkip_countermeasures_cmd(ar->arWmi, param->value); + break; + + case IW_AUTH_DROP_UNENCRYPTED: + break; + + case IW_AUTH_80211_AUTH_ALG: + if (param->value & IW_AUTH_ALG_OPEN_SYSTEM) { + ar->arDot11AuthMode = OPEN_AUTH; + } + if (param->value & IW_AUTH_ALG_SHARED_KEY) { + ar->arDot11AuthMode = SHARED_AUTH; + } + if (param->value & IW_AUTH_ALG_LEAP) { + ar->arDot11AuthMode = LEAP_AUTH; + ar->arPairwiseCrypto = WEP_CRYPT; + ar->arGroupCrypto = WEP_CRYPT; + } + + reset = 1; + break; + + case IW_AUTH_WPA_ENABLED: + reset = 1; + break; + + case IW_AUTH_RX_UNENCRYPTED_EAPOL: + break; + + case IW_AUTH_PRIVACY_INVOKED: + break; + + default: + printk("%s(): Unknown flag 0x%x\n", __FUNCTION__, param->flags); + return -EOPNOTSUPP; + } + + if (reset) { + A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); + ar->arSsidLen = 0; + } + + return 0; +} + +static int ar6000_ioctl_giwauth(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *dwrq, + char *extra) +{ + return 0; +} + +static int ar6000_ioctl_siwencodeext(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, + char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + struct iw_point *encoding = &wrqu->encoding; + struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; + int alg = ext->alg, idx; + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + /* Determine and validate the key index */ + idx = (encoding->flags & IW_ENCODE_INDEX) - 1; + if (idx) { + if (idx < 0 || idx > 3) + return -EINVAL; + } + + if ((alg == IW_ENCODE_ALG_TKIP) || (alg == IW_ENCODE_ALG_CCMP)) { + struct ieee80211req_key ik; + KEY_USAGE key_usage; + CRYPTO_TYPE key_type = NONE_CRYPT; + int status; + + ar->user_saved_keys.keyOk = FALSE; + + if (alg == IW_ENCODE_ALG_TKIP) { + key_type = TKIP_CRYPT; + ik.ik_type = IEEE80211_CIPHER_TKIP; + } else { + key_type = AES_CRYPT; + ik.ik_type = IEEE80211_CIPHER_AES_CCM; + } + + ik.ik_keyix = idx; + ik.ik_keylen = ext->key_len; + ik.ik_flags = IEEE80211_KEY_RECV; + if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { + ik.ik_flags |= IEEE80211_KEY_XMIT + | IEEE80211_KEY_DEFAULT; + } + + if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) { + memcpy(&ik.ik_keyrsc, ext->rx_seq, 8); + } + + memcpy(ik.ik_keydata, ext->key, ext->key_len); + + ar->user_saved_keys.keyType = key_type; + if (ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY) { + key_usage = GROUP_USAGE; + memset(ik.ik_macaddr, 0, ETH_ALEN); + memcpy(&ar->user_saved_keys.bcast_ik, &ik, + sizeof(struct ieee80211req_key)); + } else { + key_usage = PAIRWISE_USAGE; + memcpy(ik.ik_macaddr, ext->addr.sa_data, ETH_ALEN); + memcpy(&ar->user_saved_keys.ucast_ik, &ik, + sizeof(struct ieee80211req_key)); + } + + status = wmi_addKey_cmd(ar->arWmi, ik.ik_keyix, key_type, + key_usage, ik.ik_keylen, + (A_UINT8 *)&ik.ik_keyrsc, + ik.ik_keydata, + KEY_OP_INIT_VAL, SYNC_BEFORE_WMIFLAG); + + if (status < 0) + return -EIO; + + ar->user_saved_keys.keyOk = TRUE; + + return 0; + + } else { + /* WEP falls back to SIWENCODE */ + return -EOPNOTSUPP; + } + + return 0; +} + + +static int ar6000_ioctl_giwencodeext(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *dwrq, + char *extra) +{ + return 0; +} + + +static int +ar6000_ioctl_setparam(struct net_device *dev, + struct iw_request_info *info, + void *erq, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + int *i = (int *)extra; + int param = i[0]; + int value = i[1]; + int ret = 0; + A_BOOL profChanged = FALSE; + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + switch (param) { + case IEEE80211_PARAM_WPA: + switch (value) { + case WPA_MODE_WPA1: + ar->arAuthMode = WPA_AUTH; + profChanged = TRUE; + break; + case WPA_MODE_WPA2: + ar->arAuthMode = WPA2_AUTH; + profChanged = TRUE; + break; + case WPA_MODE_NONE: + ar->arAuthMode = NONE_AUTH; + profChanged = TRUE; + break; + default: + printk("IEEE80211_PARAM_WPA: Unknown value %d\n", value); + } + break; + case IEEE80211_PARAM_AUTHMODE: + switch(value) { + case IEEE80211_AUTH_WPA_PSK: + if (WPA_AUTH == ar->arAuthMode) { + ar->arAuthMode = WPA_PSK_AUTH; + profChanged = TRUE; + } else if (WPA2_AUTH == ar->arAuthMode) { + ar->arAuthMode = WPA2_PSK_AUTH; + profChanged = TRUE; + } else { + AR_DEBUG_PRINTF("Error - Setting PSK mode when WPA "\ + "param was set to %d\n", + ar->arAuthMode); + ret = -1; + } + break; + case IEEE80211_AUTH_WPA_CCKM: + if (WPA2_AUTH == ar->arAuthMode) { + ar->arAuthMode = WPA2_AUTH_CCKM; + } else { + ar->arAuthMode = WPA_AUTH_CCKM; + } + break; + default: + break; + } + break; + case IEEE80211_PARAM_UCASTCIPHER: + switch (value) { + case IEEE80211_CIPHER_AES_CCM: + ar->arPairwiseCrypto = AES_CRYPT; + profChanged = TRUE; + break; + case IEEE80211_CIPHER_TKIP: + ar->arPairwiseCrypto = TKIP_CRYPT; + profChanged = TRUE; + break; + case IEEE80211_CIPHER_WEP: + ar->arPairwiseCrypto = WEP_CRYPT; + profChanged = TRUE; + break; + case IEEE80211_CIPHER_NONE: + ar->arPairwiseCrypto = NONE_CRYPT; + profChanged = TRUE; + break; + } + break; + case IEEE80211_PARAM_UCASTKEYLEN: + if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(value)) { + ret = -EIO; + } else { + ar->arPairwiseCryptoLen = value; + } + break; + case IEEE80211_PARAM_MCASTCIPHER: + switch (value) { + case IEEE80211_CIPHER_AES_CCM: + ar->arGroupCrypto = AES_CRYPT; + profChanged = TRUE; + break; + case IEEE80211_CIPHER_TKIP: + ar->arGroupCrypto = TKIP_CRYPT; + profChanged = TRUE; + break; + case IEEE80211_CIPHER_WEP: + ar->arGroupCrypto = WEP_CRYPT; + profChanged = TRUE; + break; + case IEEE80211_CIPHER_NONE: + ar->arGroupCrypto = NONE_CRYPT; + profChanged = TRUE; + break; + } + break; + case IEEE80211_PARAM_MCASTKEYLEN: + if (!IEEE80211_IS_VALID_WEP_CIPHER_LEN(value)) { + ret = -EIO; + } else { + ar->arGroupCryptoLen = value; + } + break; + case IEEE80211_PARAM_COUNTERMEASURES: + if (ar->arWmiReady == FALSE) { + return -EIO; + } + wmi_set_tkip_countermeasures_cmd(ar->arWmi, value); + break; + default: + break; + } + + if (profChanged == TRUE) { + /* + * profile has changed. Erase ssid to signal change + */ + A_MEMZERO(ar->arSsid, sizeof(ar->arSsid)); + ar->arSsidLen = 0; + } + + return ret; +} + +int +ar6000_ioctl_getparam(struct net_device *dev, struct iw_request_info *info, + void *w, char *extra) +{ + return -EIO; /* for now */ +} + +int +ar6000_ioctl_setkey(struct net_device *dev, struct iw_request_info *info, + void *w, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + struct ieee80211req_key *ik = (struct ieee80211req_key *)extra; + KEY_USAGE keyUsage; + A_STATUS status; + CRYPTO_TYPE keyType = NONE_CRYPT; + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + ar->user_saved_keys.keyOk = FALSE; + + if ( 0 == memcmp(ik->ik_macaddr, "\x00\x00\x00\x00\x00\x00", + IEEE80211_ADDR_LEN)) { + keyUsage = GROUP_USAGE; + A_MEMCPY(&ar->user_saved_keys.bcast_ik, ik, + sizeof(struct ieee80211req_key)); + } else { + keyUsage = PAIRWISE_USAGE; + A_MEMCPY(&ar->user_saved_keys.ucast_ik, ik, + sizeof(struct ieee80211req_key)); + } + + switch (ik->ik_type) { + case IEEE80211_CIPHER_WEP: + keyType = WEP_CRYPT; + break; + case IEEE80211_CIPHER_TKIP: + keyType = TKIP_CRYPT; + break; + case IEEE80211_CIPHER_AES_CCM: + keyType = AES_CRYPT; + break; + default: + break; + } + ar->user_saved_keys.keyType = keyType; + + if (IEEE80211_CIPHER_CCKM_KRK != ik->ik_type) { + if (NONE_CRYPT == keyType) { + return -EIO; + } + + status = wmi_addKey_cmd(ar->arWmi, ik->ik_keyix, keyType, keyUsage, + ik->ik_keylen, (A_UINT8 *)&ik->ik_keyrsc, + ik->ik_keydata, KEY_OP_INIT_VAL, + SYNC_BEFORE_WMIFLAG); + + if (status != A_OK) { + return -EIO; + } + } else { + status = wmi_add_krk_cmd(ar->arWmi, ik->ik_keydata); + } + + ar->user_saved_keys.keyOk = TRUE; + + return 0; +} + + +/* + * SIOCGIWNAME + */ +int +ar6000_ioctl_giwname(struct net_device *dev, + struct iw_request_info *info, + char *name, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + switch (ar->arPhyCapability) { + case (WMI_11A_CAPABILITY): + strncpy(name, "AR6000 802.11a", IFNAMSIZ); + break; + case (WMI_11G_CAPABILITY): + strncpy(name, "AR6000 802.11g", IFNAMSIZ); + break; + case (WMI_11AG_CAPABILITY): + strncpy(name, "AR6000 802.11ag", IFNAMSIZ); + break; + default: + strncpy(name, "AR6000 802.11", IFNAMSIZ); + break; + } + + return 0; +} + +/* + * SIOCSIWFREQ + */ +int +ar6000_ioctl_siwfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + /* + * We support limiting the channels via wmiconfig. + * + * We use this command to configure the channel hint for the connect cmd + * so it is possible the target will end up connecting to a different + * channel. + */ + if (freq->e > 1) { + return -EINVAL; + } else if (freq->e == 1) { + ar->arChannelHint = freq->m / 100000; + } else { + ar->arChannelHint = wlan_ieee2freq(freq->m); + } + + A_PRINTF("channel hint set to %d\n", ar->arChannelHint); + return 0; +} + +/* + * SIOCGIWFREQ + */ +int +ar6000_ioctl_giwfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + if (ar->arConnected != TRUE) { + return -EINVAL; + } + + freq->m = ar->arBssChannel * 100000; + freq->e = 1; + + return 0; +} + +/* + * SIOCSIWMODE + */ +int +ar6000_ioctl_siwmode(struct net_device *dev, + struct iw_request_info *info, + __u32 *mode, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + switch (*mode) { + case IW_MODE_INFRA: + ar->arNetworkType = INFRA_NETWORK; + break; + case IW_MODE_ADHOC: + ar->arNetworkType = ADHOC_NETWORK; + break; + default: + return -EINVAL; + } + + return 0; +} + +/* + * SIOCGIWMODE + */ +int +ar6000_ioctl_giwmode(struct net_device *dev, + struct iw_request_info *info, + __u32 *mode, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + switch (ar->arNetworkType) { + case INFRA_NETWORK: + *mode = IW_MODE_INFRA; + break; + case ADHOC_NETWORK: + *mode = IW_MODE_ADHOC; + break; + default: + return -EIO; + } + return 0; +} + +/* + * SIOCSIWSENS + */ +int +ar6000_ioctl_siwsens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *sens, char *extra) +{ + return 0; +} + +/* + * SIOCGIWSENS + */ +int +ar6000_ioctl_giwsens(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *sens, char *extra) +{ + sens->value = 0; + sens->fixed = 1; + + return 0; +} + +/* + * SIOCGIWRANGE + */ +int +ar6000_ioctl_giwrange(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + struct iw_range *range = (struct iw_range *) extra; + int i, ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + if (down_interruptible(&ar->arSem)) { + return -ERESTARTSYS; + } + ar->arNumChannels = -1; + A_MEMZERO(ar->arChannelList, sizeof (ar->arChannelList)); + + if (wmi_get_channelList_cmd(ar->arWmi) != A_OK) { + up(&ar->arSem); + return -EIO; + } + + wait_event_interruptible_timeout(arEvent, ar->arNumChannels != -1, wmitimeout * HZ); + + if (signal_pending(current)) { + up(&ar->arSem); + return -EINTR; + } + + data->length = sizeof(struct iw_range); + A_MEMZERO(range, sizeof(struct iw_range)); + + range->txpower_capa = IW_TXPOW_DBM; + + range->min_pmp = 1 * 1024; + range->max_pmp = 65535 * 1024; + range->min_pmt = 1 * 1024; + range->max_pmt = 1000 * 1024; + range->pmp_flags = IW_POWER_PERIOD; + range->pmt_flags = IW_POWER_TIMEOUT; + range->pm_capa = 0; + + range->we_version_compiled = WIRELESS_EXT; + range->we_version_source = 13; + + range->retry_capa = IW_RETRY_LIMIT; + range->retry_flags = IW_RETRY_LIMIT; + range->min_retry = 0; + range->max_retry = 255; + + range->num_frequency = range->num_channels = ar->arNumChannels; + for (i = 0; i < ar->arNumChannels; i++) { + range->freq[i].i = wlan_freq2ieee(ar->arChannelList[i]); + range->freq[i].m = ar->arChannelList[i] * 100000; + range->freq[i].e = 1; + /* + * Linux supports max of 32 channels, bail out once you + * reach the max. + */ + if (i == IW_MAX_FREQUENCIES) { + break; + } + } + + /* Max quality is max field value minus noise floor */ + range->max_qual.qual = 0xff - 161; + + /* + * In order to use dBm measurements, 'level' must be lower + * than any possible measurement (see iw_print_stats() in + * wireless tools). It's unclear how this is meant to be + * done, but setting zero in these values forces dBm and + * the actual numbers are not used. + */ + range->max_qual.level = 0; + range->max_qual.noise = 0; + + range->sensitivity = 3; + + range->max_encoding_tokens = 4; + /* XXX query driver to find out supported key sizes */ + range->num_encoding_sizes = 3; + range->encoding_size[0] = 5; /* 40-bit */ + range->encoding_size[1] = 13; /* 104-bit */ + range->encoding_size[2] = 16; /* 128-bit */ + + range->num_bitrates = 0; + + /* estimated maximum TCP throughput values (bps) */ + range->throughput = 22000000; + + range->min_rts = 0; + range->max_rts = 2347; + range->min_frag = 256; + range->max_frag = 2346; + + up(&ar->arSem); + + return ret; +} + + +/* + * SIOCSIWAP + * This ioctl is used to set the desired bssid for the connect command. + */ +int +ar6000_ioctl_siwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + if (ap_addr->sa_family != ARPHRD_ETHER) { + return -EIO; + } + + if (A_MEMCMP(&ap_addr->sa_data, bcast_mac, AR6000_ETH_ADDR_LEN) == 0) { + A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid)); + } else { + A_MEMCPY(ar->arReqBssid, &ap_addr->sa_data, sizeof(ar->arReqBssid)); + } + + return 0; +} + +/* + * SIOCGIWAP + */ +int +ar6000_ioctl_giwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra) +{ + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + if (ar->arConnected != TRUE) { + return -EINVAL; + } + + A_MEMCPY(&ap_addr->sa_data, ar->arBssid, sizeof(ar->arBssid)); + ap_addr->sa_family = ARPHRD_ETHER; + + return 0; +} + +/* + * SIOCGIWAPLIST + */ +int +ar6000_ioctl_iwaplist(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ + return -EIO; /* for now */ +} + +/* + * SIOCSIWSCAN + */ +int +ar6000_ioctl_siwscan(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra) +{ +#define ACT_DWELLTIME_DEFAULT 105 +#define HOME_TXDRAIN_TIME 100 +#define SCAN_INT HOME_TXDRAIN_TIME + ACT_DWELLTIME_DEFAULT + AR_SOFTC_T *ar = (AR_SOFTC_T *)netdev_priv(dev); + int ret = 0; + + if (ar->arWmiReady == FALSE) { + return -EIO; + } + + if (ar->arWlanState == WLAN_DISABLED) { + return -EIO; + } + + /* We ask for everything from the target */ + if (wmi_bssfilter_cmd(ar->arWmi, ALL_BSS_FILTER, 0) != A_OK) { + printk("Couldn't set filtering\n"); + ret = -EIO; + } + + if (wmi_startscan_cmd(ar->arWmi, WMI_LONG_SCAN, FALSE, FALSE, \ + HOME_TXDRAIN_TIME, SCAN_INT) != A_OK) { + ret = -EIO; + } + + ar->scan_complete = 0; + wait_event_interruptible_timeout(ar6000_scan_queue, ar->scan_complete, + 5 * HZ); + + if (wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0) != A_OK) { + printk("Couldn't set filtering\n"); + ret = -EIO; + } + + return ret; +#undef ACT_DWELLTIME_DEFAULT +#undef HOME_TXDRAIN_TIME +#undef SCAN_INT +} + + +/* + * Units are in db above the noise floor. That means the + * rssi values reported in the tx/rx descriptors in the + * driver are the SNR expressed in db. + * + * If you assume that the noise floor is -95, which is an + * excellent assumption 99.5 % of the time, then you can + * derive the absolute signal level (i.e. -95 + rssi). + * There are some other slight factors to take into account + * depending on whether the rssi measurement is from 11b, + * 11g, or 11a. These differences are at most 2db and + * can be documented. + * + * NB: various calculations are based on the orinoco/wavelan + * drivers for compatibility + */ +static void +ar6000_set_quality(struct iw_quality *iq, A_INT8 rssi) +{ + if (rssi < 0) { + iq->qual = 0; + } else { + iq->qual = rssi; + } + + /* NB: max is 94 because noise is hardcoded to 161 */ + if (iq->qual > 94) + iq->qual = 94; + + iq->noise = 161; /* -95dBm */ + iq->level = iq->noise + iq->qual; + iq->updated = 7; +} + + +/* Structures to export the Wireless Handlers */ +static const iw_handler ath_handlers[] = { + (iw_handler) NULL, /* SIOCSIWCOMMIT */ + (iw_handler) ar6000_ioctl_giwname, /* SIOCGIWNAME */ + (iw_handler) NULL, /* SIOCSIWNWID */ + (iw_handler) NULL, /* SIOCGIWNWID */ + (iw_handler) ar6000_ioctl_siwfreq, /* SIOCSIWFREQ */ + (iw_handler) ar6000_ioctl_giwfreq, /* SIOCGIWFREQ */ + (iw_handler) ar6000_ioctl_siwmode, /* SIOCSIWMODE */ + (iw_handler) ar6000_ioctl_giwmode, /* SIOCGIWMODE */ + (iw_handler) ar6000_ioctl_siwsens, /* SIOCSIWSENS */ + (iw_handler) ar6000_ioctl_giwsens, /* SIOCGIWSENS */ + (iw_handler) NULL /* not _used */, /* SIOCSIWRANGE */ + (iw_handler) ar6000_ioctl_giwrange, /* SIOCGIWRANGE */ + (iw_handler) NULL /* not used */, /* SIOCSIWPRIV */ + (iw_handler) NULL /* kernel code */, /* SIOCGIWPRIV */ + (iw_handler) NULL /* not used */, /* SIOCSIWSTATS */ + (iw_handler) NULL /* kernel code */, /* SIOCGIWSTATS */ + (iw_handler) NULL, /* SIOCSIWSPY */ + (iw_handler) NULL, /* SIOCGIWSPY */ + (iw_handler) NULL, /* SIOCSIWTHRSPY */ + (iw_handler) NULL, /* SIOCGIWTHRSPY */ + (iw_handler) ar6000_ioctl_siwap, /* SIOCSIWAP */ + (iw_handler) ar6000_ioctl_giwap, /* SIOCGIWAP */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) ar6000_ioctl_iwaplist, /* SIOCGIWAPLIST */ + (iw_handler) ar6000_ioctl_siwscan, /* SIOCSIWSCAN */ + (iw_handler) ar6000_ioctl_giwscan, /* SIOCGIWSCAN */ + (iw_handler) ar6000_ioctl_siwessid, /* SIOCSIWESSID */ + (iw_handler) ar6000_ioctl_giwessid, /* SIOCGIWESSID */ + (iw_handler) NULL, /* SIOCSIWNICKN */ + (iw_handler) NULL, /* SIOCGIWNICKN */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) ar6000_ioctl_siwrate, /* SIOCSIWRATE */ + (iw_handler) ar6000_ioctl_giwrate, /* SIOCGIWRATE */ + (iw_handler) NULL, /* SIOCSIWRTS */ + (iw_handler) NULL, /* SIOCGIWRTS */ + (iw_handler) NULL, /* SIOCSIWFRAG */ + (iw_handler) NULL, /* SIOCGIWFRAG */ + (iw_handler) ar6000_ioctl_siwtxpow, /* SIOCSIWTXPOW */ + (iw_handler) ar6000_ioctl_giwtxpow, /* SIOCGIWTXPOW */ + (iw_handler) ar6000_ioctl_siwretry, /* SIOCSIWRETRY */ + (iw_handler) ar6000_ioctl_giwretry, /* SIOCGIWRETRY */ + (iw_handler) ar6000_ioctl_siwencode, /* SIOCSIWENCODE */ + (iw_handler) ar6000_ioctl_giwencode, /* SIOCGIWENCODE */ + (iw_handler) ar6000_ioctl_siwpower, /* SIOCSIWPOWER */ + (iw_handler) ar6000_ioctl_giwpower, /* SIOCGIWPOWER */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) NULL, /* -- hole -- */ + (iw_handler) ar6000_ioctl_siwgenie, /* SIOCSIWGENIE */ + (iw_handler) ar6000_ioctl_giwgenie, /* SIOCGIWGENIE */ + (iw_handler) ar6000_ioctl_siwauth, /* SIOCSIWAUTH */ + (iw_handler) ar6000_ioctl_giwauth, /* SIOCGIWAUTH */ + (iw_handler) ar6000_ioctl_siwencodeext,/* SIOCSIWENCODEEXT */ + (iw_handler) ar6000_ioctl_giwencodeext,/* SIOCGIWENCODEEXT */ + (iw_handler) NULL, /* SIOCSIWPMKSA */ +}; + +static const iw_handler ath_priv_handlers[] = { + (iw_handler) ar6000_ioctl_setparam, /* SIOCWFIRSTPRIV+0 */ + (iw_handler) ar6000_ioctl_getparam, /* SIOCWFIRSTPRIV+1 */ + (iw_handler) ar6000_ioctl_setkey, /* SIOCWFIRSTPRIV+2 */ + (iw_handler) ar6000_ioctl_setwmmparams, /* SIOCWFIRSTPRIV+3 */ + (iw_handler) ar6000_ioctl_delkey, /* SIOCWFIRSTPRIV+4 */ + (iw_handler) ar6000_ioctl_getwmmparams, /* SIOCWFIRSTPRIV+5 */ + (iw_handler) ar6000_ioctl_setoptie, /* SIOCWFIRSTPRIV+6 */ + (iw_handler) ar6000_ioctl_setmlme, /* SIOCWFIRSTPRIV+7 */ + (iw_handler) ar6000_ioctl_addpmkid, /* SIOCWFIRSTPRIV+8 */ +}; + +#define IW_PRIV_TYPE_KEY \ + (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_key)) +#define IW_PRIV_TYPE_DELKEY \ + (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_del_key)) +#define IW_PRIV_TYPE_MLME \ + (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_mlme)) +#define IW_PRIV_TYPE_ADDPMKID \ + (IW_PRIV_TYPE_BYTE | sizeof(struct ieee80211req_addpmkid)) + +static const struct iw_priv_args ar6000_priv_args[] = { + { IEEE80211_IOCTL_SETKEY, + IW_PRIV_TYPE_KEY | IW_PRIV_SIZE_FIXED, 0, "setkey"}, + { IEEE80211_IOCTL_DELKEY, + IW_PRIV_TYPE_DELKEY | IW_PRIV_SIZE_FIXED, 0, "delkey"}, + { IEEE80211_IOCTL_SETPARAM, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "setparam"}, + { IEEE80211_IOCTL_GETPARAM, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getparam"}, + { IEEE80211_IOCTL_SETWMMPARAMS, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 4, 0, "setwmmparams"}, + { IEEE80211_IOCTL_GETWMMPARAMS, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 3, + IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "getwmmparams"}, + { IEEE80211_IOCTL_SETOPTIE, + IW_PRIV_TYPE_BYTE, 0, "setie"}, + { IEEE80211_IOCTL_SETMLME, + IW_PRIV_TYPE_MLME, 0, "setmlme"}, + { IEEE80211_IOCTL_ADDPMKID, + IW_PRIV_TYPE_ADDPMKID | IW_PRIV_SIZE_FIXED, 0, "addpmkid"}, +}; + +void ar6000_ioctl_iwsetup(struct iw_handler_def *def) +{ + def->private_args = (struct iw_priv_args *)ar6000_priv_args; + def->num_private_args = ARRAY_SIZE(ar6000_priv_args); +} + +struct iw_handler_def ath_iw_handler_def = { + .standard = (iw_handler *)ath_handlers, + .num_standard = ARRAY_SIZE(ath_handlers), + .private = (iw_handler *)ath_priv_handlers, + .num_private = ARRAY_SIZE(ath_priv_handlers), +}; + + diff --git a/drivers/ar6000/bmi/bmi.c b/drivers/ar6000/bmi/bmi.c new file mode 100644 index 00000000000..d7b610c153e --- /dev/null +++ b/drivers/ar6000/bmi/bmi.c @@ -0,0 +1,657 @@ +/* + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "hif.h" +#include "bmi.h" +#include "htc_api.h" +#include "bmi_internal.h" + +/* +Although we had envisioned BMI to run on top of HTC, this is not what the +final implementation boiled down to on dragon. Its a part of BSP and does +not use the HTC protocol either. On the host side, however, we were still +living with the original idea. I think the time has come to accept the truth +and separate it from HTC which has been carrying BMI's burden all this while. +It shall make HTC state machine relatively simpler +*/ + +/* APIs visible to the driver */ +void +BMIInit(void) +{ + bmiDone = FALSE; +} + +A_STATUS +BMIDone(HIF_DEVICE *device) +{ + A_STATUS status; + A_UINT32 cid; + + if (bmiDone) { + AR_DEBUG_PRINTF (ATH_DEBUG_BMI, ("BMIDone skipped\n")); + return A_OK; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Enter (device: 0x%p)\n", device)); + bmiDone = TRUE; + cid = BMI_DONE; + + status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Done: Exit\n")); + + return A_OK; +} + +A_STATUS +BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info) +{ + A_STATUS status; + A_UINT32 cid; + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Enter (device: 0x%p)\n", device)); + cid = BMI_GET_TARGET_INFO; + + status = bmiBufferSend(device, (A_UCHAR *)&cid, sizeof(cid)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_ver, + sizeof(targ_info->target_ver)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Version from the device\n")); + return A_ERROR; + } + + if (targ_info->target_ver == TARGET_VERSION_SENTINAL) { + /* Determine how many bytes are in the Target's targ_info */ + status = bmiBufferReceive(device, (A_UCHAR *)&targ_info->target_info_byte_count, + sizeof(targ_info->target_info_byte_count)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info Byte Count from the device\n")); + return A_ERROR; + } + + /* + * The Target's targ_info doesn't match the Host's targ_info. + * We need to do some backwards compatibility work to make this OK. + */ + A_ASSERT(targ_info->target_info_byte_count == sizeof(*targ_info)); + + /* Read the remainder of the targ_info */ + status = bmiBufferReceive(device, + ((A_UCHAR *)targ_info)+sizeof(targ_info->target_info_byte_count), + sizeof(*targ_info)-sizeof(targ_info->target_info_byte_count)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read Target Info (%d bytes) from the device\n", + targ_info->target_info_byte_count)); + return A_ERROR; + } + } else { + /* + * Target must be an AR6001 whose firmware does not + * support BMI_GET_TARGET_INFO. Construct the data + * that it would have sent. + */ + targ_info->target_info_byte_count = sizeof(targ_info); + targ_info->target_type = TARGET_TYPE_AR6001; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n", + targ_info->target_ver, targ_info->target_type)); + printk("BMI Get Target Info: Exit (ver: 0x%x type: 0x%x)\n", + targ_info->target_ver, targ_info->target_type); + + return A_OK; +} + +A_STATUS +BMIReadMemory(HIF_DEVICE *device, + A_UINT32 address, + A_UCHAR *buffer, + A_UINT32 length) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + A_UINT32 remaining, rxlen; + static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)]; + memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI Read Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n", + device, address, length)); + + cid = BMI_READ_MEMORY; + + remaining = length; + + while (remaining) + { + rxlen = (remaining < BMI_DATASZ_MAX) ? remaining : BMI_DATASZ_MAX; + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &address, sizeof(address)); + offset += sizeof(address); + A_MEMCPY(&data[offset], &rxlen, sizeof(rxlen)); + offset += sizeof(length); + + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + status = bmiBufferReceive(device, data, rxlen); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); + return A_ERROR; + } + A_MEMCPY(&buffer[length - remaining], data, rxlen); + remaining -= rxlen; address += rxlen; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read Memory: Exit\n")); + return A_OK; +} + +A_STATUS +BMIWriteMemory(HIF_DEVICE *device, + A_UINT32 address, + A_UCHAR *buffer, + A_UINT32 length) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + A_UINT32 remaining, txlen; + const A_UINT32 header = sizeof(cid) + sizeof(address) + sizeof(length); + static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(address) + sizeof(length)]; + memset (&data, 0, header); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI Write Memory: Enter (device: 0x%p, address: 0x%x, length: %d)\n", + device, address, length)); + + cid = BMI_WRITE_MEMORY; + + remaining = length; + while (remaining) + { + txlen = (remaining < (BMI_DATASZ_MAX - header)) ? + remaining : (BMI_DATASZ_MAX - header); + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &address, sizeof(address)); + offset += sizeof(address); + A_MEMCPY(&data[offset], &txlen, sizeof(txlen)); + offset += sizeof(txlen); + A_MEMCPY(&data[offset], &buffer[length - remaining], txlen); + offset += txlen; + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + remaining -= txlen; address += txlen; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Write Memory: Exit\n")); + + return A_OK; +} + +A_STATUS +BMIExecute(HIF_DEVICE *device, + A_UINT32 address, + A_UINT32 *param) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(*param)]; + memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(*param)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI Execute: Enter (device: 0x%p, address: 0x%x, param: %d)\n", + device, address, *param)); + + cid = BMI_EXECUTE; + + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &address, sizeof(address)); + offset += sizeof(address); + A_MEMCPY(&data[offset], param, sizeof(*param)); + offset += sizeof(*param); + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + status = bmiBufferReceive(device, data, sizeof(*param)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); + return A_ERROR; + } + + A_MEMCPY(param, data, sizeof(*param)); + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Execute: Exit (param: %d)\n", *param)); + return A_OK; +} + +A_STATUS +BMISetAppStart(HIF_DEVICE *device, + A_UINT32 address) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + static A_UCHAR data[sizeof(cid) + sizeof(address)]; + memset (&data, 0, sizeof(cid) + sizeof(address)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI Set App Start: Enter (device: 0x%p, address: 0x%x)\n", + device, address)); + + cid = BMI_SET_APP_START; + + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &address, sizeof(address)); + offset += sizeof(address); + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Set App Start: Exit\n")); + return A_OK; +} + +A_STATUS +BMIReadSOCRegister(HIF_DEVICE *device, + A_UINT32 address, + A_UINT32 *param) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + static A_UCHAR data[sizeof(cid) + sizeof(address)]; + memset (&data, 0, sizeof(cid) + sizeof(address)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI Read SOC Register: Enter (device: 0x%p, address: 0x%x)\n", + device, address)); + + cid = BMI_READ_SOC_REGISTER; + + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &address, sizeof(address)); + offset += sizeof(address); + + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + status = bmiBufferReceive(device, data, sizeof(*param)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); + return A_ERROR; + } + A_MEMCPY(param, data, sizeof(*param)); + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit (value: %d)\n", *param)); + return A_OK; +} + +A_STATUS +BMIWriteSOCRegister(HIF_DEVICE *device, + A_UINT32 address, + A_UINT32 param) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + static A_UCHAR data[sizeof(cid) + sizeof(address) + sizeof(param)]; + + memset (&data, 0, sizeof(cid) + sizeof(address) + sizeof(param)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI Write SOC Register: Enter (device: 0x%p, address: 0x%x, param: %d)\n", + device, address, param)); + + cid = BMI_WRITE_SOC_REGISTER; + + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &address, sizeof(address)); + offset += sizeof(address); + A_MEMCPY(&data[offset], ¶m, sizeof(param)); + offset += sizeof(param); + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Read SOC Register: Exit\n")); + return A_OK; +} + +A_STATUS +BMIrompatchInstall(HIF_DEVICE *device, + A_UINT32 ROM_addr, + A_UINT32 RAM_addr, + A_UINT32 nbytes, + A_UINT32 do_activate, + A_UINT32 *rompatch_id) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + static A_UCHAR data[sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) + + sizeof(nbytes) + sizeof(do_activate)]; + + memset (&data, 0, sizeof(cid) + sizeof(ROM_addr) + sizeof(RAM_addr) + + sizeof(nbytes) + sizeof(do_activate)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI rompatch Install: Enter (device: 0x%p, ROMaddr: 0x%x, RAMaddr: 0x%x length: %d activate: %d)\n", + device, ROM_addr, RAM_addr, nbytes, do_activate)); + + cid = BMI_ROMPATCH_INSTALL; + + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &ROM_addr, sizeof(ROM_addr)); + offset += sizeof(ROM_addr); + A_MEMCPY(&data[offset], &RAM_addr, sizeof(RAM_addr)); + offset += sizeof(RAM_addr); + A_MEMCPY(&data[offset], &nbytes, sizeof(nbytes)); + offset += sizeof(nbytes); + A_MEMCPY(&data[offset], &do_activate, sizeof(do_activate)); + offset += sizeof(do_activate); + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + status = bmiBufferReceive(device, (A_UCHAR *)rompatch_id, sizeof(*rompatch_id)); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read from the device\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch Install: (rompatch_id=%d)\n", *rompatch_id)); + return A_OK; +} + +A_STATUS +BMIrompatchUninstall(HIF_DEVICE *device, + A_UINT32 rompatch_id) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + static A_UCHAR data[sizeof(cid) + sizeof(rompatch_id)]; + memset (&data, 0, sizeof(cid) + sizeof(rompatch_id)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI rompatch Uninstall: Enter (device: 0x%p, rompatch_id: %d)\n", + device, rompatch_id)); + + cid = BMI_ROMPATCH_UNINSTALL; + + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &rompatch_id, sizeof(rompatch_id)); + offset += sizeof(rompatch_id); + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI rompatch UNinstall: (rompatch_id=0x%x)\n", rompatch_id)); + return A_OK; +} + +static A_STATUS +_BMIrompatchChangeActivation(HIF_DEVICE *device, + A_UINT32 rompatch_count, + A_UINT32 *rompatch_list, + A_UINT32 do_activate) +{ + A_UINT32 cid; + A_STATUS status; + A_UINT32 offset; + static A_UCHAR data[BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count)]; + A_UINT32 length; + + memset (&data, 0, BMI_DATASZ_MAX + sizeof(cid) + sizeof(rompatch_count)); + + if (bmiDone) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Command disallowed\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, + ("BMI Change rompatch Activation: Enter (device: 0x%p, count: %d)\n", + device, rompatch_count)); + + cid = do_activate ? BMI_ROMPATCH_ACTIVATE : BMI_ROMPATCH_DEACTIVATE; + + offset = 0; + A_MEMCPY(&data[offset], &cid, sizeof(cid)); + offset += sizeof(cid); + A_MEMCPY(&data[offset], &rompatch_count, sizeof(rompatch_count)); + offset += sizeof(rompatch_count); + length = rompatch_count * sizeof(*rompatch_list); + A_MEMCPY(&data[offset], rompatch_list, length); + offset += length; + status = bmiBufferSend(device, data, offset); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to write to the device\n")); + return A_ERROR; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Change rompatch Activation: Exit\n")); + + return A_OK; +} + +A_STATUS +BMIrompatchActivate(HIF_DEVICE *device, + A_UINT32 rompatch_count, + A_UINT32 *rompatch_list) +{ + return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 1); +} + +A_STATUS +BMIrompatchDeactivate(HIF_DEVICE *device, + A_UINT32 rompatch_count, + A_UINT32 *rompatch_list) +{ + return _BMIrompatchChangeActivation(device, rompatch_count, rompatch_list, 0); +} + +/* BMI Access routines */ +A_STATUS +bmiBufferSend(HIF_DEVICE *device, + A_UCHAR *buffer, + A_UINT32 length) +{ + A_STATUS status; + A_UINT32 timeout; + A_UINT32 address; + static A_UINT32 cmdCredits; + A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX]; + + HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR, + &mboxAddress, sizeof(mboxAddress)); + + cmdCredits = 0; + timeout = BMI_COMMUNICATION_TIMEOUT; + + while(timeout-- && !cmdCredits) { + /* Read the counter register to get the command credits */ + address = COUNT_DEC_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 4; + /* hit the credit counter with a 4-byte access, the first byte read will hit the counter and cause + * a decrement, while the remaining 3 bytes has no effect. The rationale behind this is to + * make all HIF accesses 4-byte aligned */ + status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, 4, + HIF_RD_SYNC_BYTE_INC, NULL); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to decrement the command credit count register\n")); + return A_ERROR; + } + /* the counter is only 8=bits, ignore anything in the upper 3 bytes */ + cmdCredits &= 0xFF; + } + + if (cmdCredits) { + address = mboxAddress[ENDPOINT1]; + status = HIFReadWrite(device, address, buffer, length, + HIF_WR_SYNC_BYTE_INC, NULL); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to send the BMI data to the device\n")); + return A_ERROR; + } + } else { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Communication timeout\n")); + return A_ERROR; + } + + return status; +} + +A_STATUS +bmiBufferReceive(HIF_DEVICE *device, + A_UCHAR *buffer, + A_UINT32 length) +{ + A_STATUS status; + A_UINT32 address; + A_UINT32 timeout; + static A_UINT32 cmdCredits; + A_UINT32 mboxAddress[HTC_MAILBOX_NUM_MAX]; + + HIFConfigureDevice(device, HIF_DEVICE_GET_MBOX_ADDR, + &mboxAddress, sizeof(mboxAddress)); + + cmdCredits = 0; + timeout = BMI_COMMUNICATION_TIMEOUT; + while(timeout-- && !cmdCredits) { + /* Read the counter register to get the command credits */ + address = COUNT_ADDRESS + (HTC_MAILBOX_NUM_MAX + ENDPOINT1) * 1; + /* read the counter using a 4-byte read. Since the counter is NOT auto-decrementing, + * we can read this counter multiple times using a non-incrementing address mode. + * The rationale here is to make all HIF accesses a multiple of 4 bytes */ + status = HIFReadWrite(device, address, (A_UINT8 *)&cmdCredits, sizeof(cmdCredits), + HIF_RD_SYNC_BYTE_FIX, NULL); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the command credit count register\n")); + return A_ERROR; + } + /* we did a 4-byte read to the same count register so mask off upper bytes */ + cmdCredits &= 0xFF; + status = A_ERROR; + } + + if (cmdCredits) { + address = mboxAddress[ENDPOINT1]; + status = HIFReadWrite(device, address, buffer, length, + HIF_RD_SYNC_BYTE_INC, NULL); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to read the BMI data from the device\n")); + return A_ERROR; + } + } else { + AR_DEBUG_PRINTF(ATH_DEBUG_BMI, ("BMI Communication timeout\n")); + return A_ERROR; + } + + return status; +} diff --git a/drivers/ar6000/bmi/bmi_internal.h b/drivers/ar6000/bmi/bmi_internal.h new file mode 100644 index 00000000000..1e213540c76 --- /dev/null +++ b/drivers/ar6000/bmi/bmi_internal.h @@ -0,0 +1,45 @@ +#ifndef BMI_INTERNAL_H +#define BMI_INTERNAL_H +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "a_config.h" +#include "athdefs.h" +#include "a_types.h" +#include "a_osapi.h" +#include "a_debug.h" +#include "AR6Khwreg.h" +#include "bmi_msg.h" + +#define BMI_COMMUNICATION_TIMEOUT 100000 + +/* ------ Global Variable Declarations ------- */ +A_BOOL bmiDone; + +A_STATUS +bmiBufferSend(HIF_DEVICE *device, + A_UCHAR *buffer, + A_UINT32 length); + +A_STATUS +bmiBufferReceive(HIF_DEVICE *device, + A_UCHAR *buffer, + A_UINT32 length); + +#endif diff --git a/drivers/ar6000/hif/hif.c b/drivers/ar6000/hif/hif.c new file mode 100644 index 00000000000..d04486c35b0 --- /dev/null +++ b/drivers/ar6000/hif/hif.c @@ -0,0 +1,824 @@ +/* + * @file: hif.c + * + * @abstract: HIF layer reference implementation for Atheros SDIO stack + * + * @notice: Copyright (c) 2004-2006 Atheros Communications Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "hif_internal.h" + +/* ------ Static Variables ------ */ + +/* ------ Global Variable Declarations ------- */ +SD_PNP_INFO Ids[] = { + { + .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0xB, + .SDIO_ManufacturerCode = MANUFACTURER_CODE, + .SDIO_FunctionClass = FUNCTION_CLASS, + .SDIO_FunctionNo = 1 + }, + { + .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0xA, + .SDIO_ManufacturerCode = MANUFACTURER_CODE, + .SDIO_FunctionClass = FUNCTION_CLASS, + .SDIO_FunctionNo = 1 + }, + { + .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0x9, + .SDIO_ManufacturerCode = MANUFACTURER_CODE, + .SDIO_FunctionClass = FUNCTION_CLASS, + .SDIO_FunctionNo = 1 + }, + { + .SDIO_ManufacturerID = MANUFACTURER_ID_AR6001_BASE | 0x8, + .SDIO_ManufacturerCode = MANUFACTURER_CODE, + .SDIO_FunctionClass = FUNCTION_CLASS, + .SDIO_FunctionNo = 1 + }, + { + .SDIO_ManufacturerID = MANUFACTURER_ID_AR6002_BASE | 0x0, + .SDIO_ManufacturerCode = MANUFACTURER_CODE, + .SDIO_FunctionClass = FUNCTION_CLASS, + .SDIO_FunctionNo = 1 + }, + { + .SDIO_ManufacturerID = MANUFACTURER_ID_AR6002_BASE | 0x1, + .SDIO_ManufacturerCode = MANUFACTURER_CODE, + .SDIO_FunctionClass = FUNCTION_CLASS, + .SDIO_FunctionNo = 1 + }, + { + } //list is null termintaed +}; + +TARGET_FUNCTION_CONTEXT FunctionContext = { + .function.Version = CT_SDIO_STACK_VERSION_CODE, + .function.pName = "sdio_wlan", + .function.MaxDevices = 1, + .function.NumDevices = 0, + .function.pIds = Ids, + .function.pProbe = hifDeviceInserted, + .function.pRemove = hifDeviceRemoved, + .function.pSuspend = NULL, + .function.pResume = NULL, + .function.pWake = NULL, + .function.pContext = &FunctionContext, +}; + +HIF_DEVICE hifDevice[HIF_MAX_DEVICES]; +HTC_CALLBACKS htcCallbacks; +BUS_REQUEST busRequest[BUS_REQUEST_MAX_NUM]; +static BUS_REQUEST *s_busRequestFreeQueue = NULL; +OS_CRITICALSECTION lock; +extern A_UINT32 onebitmode; +extern A_UINT32 busspeedlow; + +#ifdef DEBUG +extern A_UINT32 debughif; +#define ATH_DEBUG_ERROR 1 +#define ATH_DEBUG_WARN 2 +#define ATH_DEBUG_TRACE 3 +#define _AR_DEBUG_PRINTX_ARG(arg...) arg +#define AR_DEBUG_PRINTF(lvl, args)\ + {if (lvl <= debughif)\ + A_PRINTF(KERN_ALERT _AR_DEBUG_PRINTX_ARG args);\ + } +#else +#define AR_DEBUG_PRINTF(lvl, args) +#endif + +static BUS_REQUEST *hifAllocateBusRequest(void); +static void hifFreeBusRequest(BUS_REQUEST *busrequest); +static THREAD_RETURN insert_helper_func(POSKERNEL_HELPER pHelper); +static void ResetAllCards(void); + +/* ------ Functions ------ */ +int HIFInit(HTC_CALLBACKS *callbacks) +{ + SDIO_STATUS status; + DBG_ASSERT(callbacks != NULL); + + /* Store the callback and event handlers */ + htcCallbacks.deviceInsertedHandler = callbacks->deviceInsertedHandler; + htcCallbacks.deviceRemovedHandler = callbacks->deviceRemovedHandler; + htcCallbacks.deviceSuspendHandler = callbacks->deviceSuspendHandler; + htcCallbacks.deviceResumeHandler = callbacks->deviceResumeHandler; + htcCallbacks.deviceWakeupHandler = callbacks->deviceWakeupHandler; + htcCallbacks.rwCompletionHandler = callbacks->rwCompletionHandler; + htcCallbacks.dsrHandler = callbacks->dsrHandler; + + CriticalSectionInit(&lock); + + /* Register with bus driver core */ + status = SDIO_RegisterFunction(&FunctionContext.function); + DBG_ASSERT(SDIO_SUCCESS(status)); + + return(0); +} + +A_STATUS +HIFReadWrite(HIF_DEVICE *device, + A_UINT32 address, + A_UCHAR *buffer, + A_UINT32 length, + A_UINT32 request, + void *context) +{ + A_UINT8 rw; + A_UINT8 mode; + A_UINT8 funcNo; + A_UINT8 opcode; + A_UINT16 count; + SDREQUEST *sdrequest; + SDIO_STATUS sdiostatus; + BUS_REQUEST *busrequest; + A_STATUS status = A_OK; + + DBG_ASSERT(device != NULL); + DBG_ASSERT(device->handle != NULL); + + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device)); + + do { + busrequest = hifAllocateBusRequest(); + if (busrequest == NULL) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("HIF Unable to allocate bus request\n")); + status = A_NO_RESOURCE; + break; + } + + sdrequest = busrequest->request; + busrequest->context = context; + + sdrequest->pDataBuffer = buffer; + if (request & HIF_SYNCHRONOUS) { + sdrequest->Flags = SDREQ_FLAGS_RESP_SDIO_R5 | SDREQ_FLAGS_DATA_TRANS; + sdrequest->pCompleteContext = NULL; + sdrequest->pCompletion = NULL; + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Execution mode: Synchronous\n")); + } else if (request & HIF_ASYNCHRONOUS) { + sdrequest->Flags = SDREQ_FLAGS_RESP_SDIO_R5 | SDREQ_FLAGS_DATA_TRANS | + SDREQ_FLAGS_TRANS_ASYNC; + sdrequest->pCompleteContext = busrequest; + sdrequest->pCompletion = hifRWCompletionHandler; + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Execution mode: Asynchronous\n")); + } else { + AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, + ("Invalid execution mode: 0x%08x\n", request)); + status = A_EINVAL; + break; + } + + if (request & HIF_EXTENDED_IO) { + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Command type: CMD53\n")); + sdrequest->Command = CMD53; + } else { + AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, + ("Invalid command type: 0x%08x\n", request)); + status = A_EINVAL; + break; + } + + if (request & HIF_BLOCK_BASIS) { + mode = CMD53_BLOCK_BASIS; + sdrequest->BlockLen = HIF_MBOX_BLOCK_SIZE; + sdrequest->BlockCount = length / HIF_MBOX_BLOCK_SIZE; + count = sdrequest->BlockCount; + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, + ("Block mode (BlockLen: %d, BlockCount: %d)\n", + sdrequest->BlockLen, sdrequest->BlockCount)); + } else if (request & HIF_BYTE_BASIS) { + mode = CMD53_BYTE_BASIS; + sdrequest->BlockLen = length; + sdrequest->BlockCount = 1; + count = sdrequest->BlockLen; + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, + ("Byte mode (BlockLen: %d, BlockCount: %d)\n", + sdrequest->BlockLen, sdrequest->BlockCount)); + } else { + AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, + ("Invalid data mode: 0x%08x\n", request)); + status = A_EINVAL; + break; + } + +#if 0 + /* useful for checking register accesses */ + if (length & 0x3) { + A_PRINTF(KERN_ALERT"HIF (%s) is not a multiple of 4 bytes, addr:0x%X, len:%d\n", + request & HIF_WRITE ? "write":"read", address, length); + } +#endif + + if ((address >= HIF_MBOX_START_ADDR(0)) && + (address <= HIF_MBOX_END_ADDR(3))) + { + + DBG_ASSERT(length <= HIF_MBOX_WIDTH); + + /* + * Mailbox write. Adjust the address so that the last byte + * falls on the EOM address. + */ + address += (HIF_MBOX_WIDTH - length); + } + + + + if (request & HIF_WRITE) { + rw = CMD53_WRITE; + sdrequest->Flags |= SDREQ_FLAGS_DATA_WRITE; + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Direction: Write\n")); + } else if (request & HIF_READ) { + rw = CMD53_READ; + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Direction: Read\n")); + } else { + AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, + ("Invalid direction: 0x%08x\n", request)); + status = A_EINVAL; + break; + } + + if (request & HIF_FIXED_ADDRESS) { + opcode = CMD53_FIXED_ADDRESS; + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Address mode: Fixed\n")); + } else if (request & HIF_INCREMENTAL_ADDRESS) { + opcode = CMD53_INCR_ADDRESS; + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Address mode: Incremental\n")); + } else { + AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, + ("Invalid address mode: 0x%08x\n", request)); + status = A_EINVAL; + break; + } + + funcNo = SDDEVICE_GET_SDIO_FUNCNO(device->handle); + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Function number: %d\n", funcNo)); + SDIO_SET_CMD53_ARG(sdrequest->Argument, rw, funcNo, + mode, opcode, address, count); + + /* Send the command out */ + sdiostatus = SDDEVICE_CALL_REQUEST_FUNC(device->handle, sdrequest); + + if (!SDIO_SUCCESS(sdiostatus)) { + status = A_ERROR; + } + + } while (FALSE); + + if (A_FAILED(status) || (request & HIF_SYNCHRONOUS)) { + if (busrequest != NULL) { + hifFreeBusRequest(busrequest); + } + } + + if (A_FAILED(status) && (request & HIF_ASYNCHRONOUS)) { + /* call back async handler on failure */ + htcCallbacks.rwCompletionHandler(context, status); + } + + return status; +} + +A_STATUS +HIFConfigureDevice(HIF_DEVICE *device, HIF_DEVICE_CONFIG_OPCODE opcode, + void *config, A_UINT32 configLen) +{ + A_UINT32 count; + + switch(opcode) { + case HIF_DEVICE_GET_MBOX_BLOCK_SIZE: + ((A_UINT32 *)config)[0] = HIF_MBOX0_BLOCK_SIZE; + ((A_UINT32 *)config)[1] = HIF_MBOX1_BLOCK_SIZE; + ((A_UINT32 *)config)[2] = HIF_MBOX2_BLOCK_SIZE; + ((A_UINT32 *)config)[3] = HIF_MBOX3_BLOCK_SIZE; + break; + + case HIF_DEVICE_GET_MBOX_ADDR: + for (count = 0; count < 4; count ++) { + ((A_UINT32 *)config)[count] = HIF_MBOX_START_ADDR(count); + } + break; + case HIF_DEVICE_GET_IRQ_PROC_MODE: + /* the SDIO stack allows the interrupts to be processed either way, ASYNC or SYNC */ + *((HIF_DEVICE_IRQ_PROCESSING_MODE *)config) = HIF_DEVICE_IRQ_ASYNC_SYNC; + break; + default: + AR_DEBUG_PRINTF(ATH_DEBUG_WARN, + ("Unsupported configuration opcode: %d\n", opcode)); + return A_ERROR; + } + + return A_OK; +} + +void +HIFShutDownDevice(HIF_DEVICE *device) +{ + A_UINT8 data; + A_UINT32 count; + SDIO_STATUS status; + SDCONFIG_BUS_MODE_DATA busSettings; + SDCONFIG_FUNC_ENABLE_DISABLE_DATA fData; + + if (device != NULL) { + DBG_ASSERT(device->handle != NULL); + + /* Remove the allocated current if any */ + status = SDLIB_IssueConfig(device->handle, + SDCONFIG_FUNC_FREE_SLOT_CURRENT, NULL, 0); + DBG_ASSERT(SDIO_SUCCESS(status)); + + /* Disable the card */ + fData.EnableFlags = SDCONFIG_DISABLE_FUNC; + fData.TimeOut = 1; + status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_ENABLE_DISABLE, + &fData, sizeof(fData)); + DBG_ASSERT(SDIO_SUCCESS(status)); + + /* Perform a soft I/O reset */ + data = SDIO_IO_RESET; + status = SDLIB_IssueCMD52(device->handle, 0, SDIO_IO_ABORT_REG, + &data, 1, 1); + DBG_ASSERT(SDIO_SUCCESS(status)); + + /* + * WAR - Codetelligence driver does not seem to shutdown correctly in 1 + * bit mode. By default it configures the HC in the 4 bit. Its later in + * our driver that we switch to 1 bit mode. If we try to shutdown, the + * driver hangs so we revert to 4 bit mode, to be transparent to the + * underlying bus driver. + */ + if (onebitmode) { + ZERO_OBJECT(busSettings); + busSettings.BusModeFlags = SDDEVICE_GET_BUSMODE_FLAGS(device->handle); + SDCONFIG_SET_BUS_WIDTH(busSettings.BusModeFlags, + SDCONFIG_BUS_WIDTH_4_BIT); + + /* Issue config request to change the bus width to 4 bit */ + status = SDLIB_IssueConfig(device->handle, SDCONFIG_BUS_MODE_CTRL, + &busSettings, + sizeof(SDCONFIG_BUS_MODE_DATA)); + DBG_ASSERT(SDIO_SUCCESS(status)); + } + + /* Free the bus requests */ + for (count = 0; count < BUS_REQUEST_MAX_NUM; count ++) { + SDDeviceFreeRequest(device->handle, busRequest[count].request); + } + /* Clean up the queue */ + s_busRequestFreeQueue = NULL; + } else { + /* since we are unloading the driver anyways, reset all cards in case the SDIO card + * is externally powered and we are unloading the SDIO stack. This avoids the problem when + * the SDIO stack is reloaded and attempts are made to re-enumerate a card that is already + * enumerated */ + ResetAllCards(); + /* Unregister with bus driver core */ + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, + ("Unregistering with the bus driver\n")); + status = SDIO_UnregisterFunction(&FunctionContext.function); + DBG_ASSERT(SDIO_SUCCESS(status)); + } +} + +void +hifRWCompletionHandler(SDREQUEST *request) +{ + A_STATUS status; + void *context; + BUS_REQUEST *busrequest; + + if (SDIO_SUCCESS(request->Status)) { + status = A_OK; + } else { + status = A_ERROR; + } + + DBG_ASSERT(status == A_OK); + busrequest = (BUS_REQUEST *) request->pCompleteContext; + context = (void *) busrequest->context; + /* free the request before calling the callback, in case the + * callback submits another request, this guarantees that + * there is at least 1 free request available everytime the callback + * is invoked */ + hifFreeBusRequest(busrequest); + htcCallbacks.rwCompletionHandler(context, status); +} + +void +hifIRQHandler(void *context) +{ + A_STATUS status; + HIF_DEVICE *device; + + device = (HIF_DEVICE *)context; + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device)); + status = htcCallbacks.dsrHandler(device->htc_handle); + DBG_ASSERT(status == A_OK); +} + +BOOL +hifDeviceInserted(SDFUNCTION *function, SDDEVICE *handle) +{ + BOOL enabled; + A_UINT8 data; + A_UINT32 count; + HIF_DEVICE *device; + SDIO_STATUS status; + A_UINT16 maxBlocks; + A_UINT16 maxBlockSize; + SDCONFIG_BUS_MODE_DATA busSettings; + SDCONFIG_FUNC_ENABLE_DISABLE_DATA fData; + TARGET_FUNCTION_CONTEXT *functionContext; + SDCONFIG_FUNC_SLOT_CURRENT_DATA slotCurrent; + SD_BUSCLOCK_RATE currentBusClock; + + DBG_ASSERT(function != NULL); + DBG_ASSERT(handle != NULL); + + device = addHifDevice(handle); + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device: %p\n", device)); + functionContext = (TARGET_FUNCTION_CONTEXT *)function->pContext; + + /* + * Issue commands to get the manufacturer ID and stuff and compare it + * against the rev Id derived from the ID registered during the + * initialization process. Report the device only in the case there + * is a match. In the case od SDIO, the bus driver has already queried + * these details so we just need to use their data structures to get the + * relevant values. Infact, the driver has already matched it against + * the Ids that we registered with it so we dont need to the step here. + */ + + /* Configure the SDIO Bus Width */ + if (onebitmode) { + data = SDIO_BUS_WIDTH_1_BIT; + status = SDLIB_IssueCMD52(handle, 0, SDIO_BUS_IF_REG, &data, 1, 1); + if (!SDIO_SUCCESS(status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, + ("Unable to set the bus width to 1 bit\n")); + return FALSE; + } + } + + /* Get current bus flags */ + ZERO_OBJECT(busSettings); + + busSettings.BusModeFlags = SDDEVICE_GET_BUSMODE_FLAGS(handle); + if (onebitmode) { + SDCONFIG_SET_BUS_WIDTH(busSettings.BusModeFlags, + SDCONFIG_BUS_WIDTH_1_BIT); + } + + /* get the current operating clock, the bus driver sets us up based + * on what our CIS reports and what the host controller can handle + * we can use this to determine whether we want to drop our clock rate + * down */ + currentBusClock = SDDEVICE_GET_OPER_CLOCK(handle); + busSettings.ClockRate = currentBusClock; + + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, + ("HIF currently running at: %d \n",currentBusClock)); + + /* see if HIF wants to run at a lower clock speed, we may already be + * at that lower clock speed */ + if (currentBusClock > (SDIO_CLOCK_FREQUENCY_DEFAULT >> busspeedlow)) { + busSettings.ClockRate = SDIO_CLOCK_FREQUENCY_DEFAULT >> busspeedlow; + AR_DEBUG_PRINTF(ATH_DEBUG_WARN, + ("HIF overriding clock to %d \n",busSettings.ClockRate)); + } + + /* Issue config request to override clock rate */ + status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_CHANGE_BUS_MODE, &busSettings, + sizeof(SDCONFIG_BUS_MODE_DATA)); + if (!SDIO_SUCCESS(status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, + ("Unable to configure the host clock\n")); + return FALSE; + } else { + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, + ("Configured clock: %d, Maximum clock: %d\n", + busSettings.ActualClockRate, + SDDEVICE_GET_MAX_CLOCK(handle))); + } + + /* + * Check if the target supports block mode. This result of this check + * can be used to implement the HIFReadWrite API. + */ + if (SDDEVICE_GET_SDIO_FUNC_MAXBLKSIZE(handle)) { + /* Limit block size to operational block limit or card function + capability */ + maxBlockSize = min(SDDEVICE_GET_OPER_BLOCK_LEN(handle), + SDDEVICE_GET_SDIO_FUNC_MAXBLKSIZE(handle)); + + /* check if the card support multi-block transfers */ + if (!(SDDEVICE_GET_SDIOCARD_CAPS(handle) & SDIO_CAPS_MULTI_BLOCK)) { + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Byte basis only\n")); + + /* Limit block size to max byte basis */ + maxBlockSize = min(maxBlockSize, + (A_UINT16)SDIO_MAX_LENGTH_BYTE_BASIS); + maxBlocks = 1; + } else { + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Multi-block capable\n")); + maxBlocks = SDDEVICE_GET_OPER_BLOCKS(handle); + status = SDLIB_SetFunctionBlockSize(handle, HIF_MBOX_BLOCK_SIZE); + if (!SDIO_SUCCESS(status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, + ("Failed to set block size. Err:%d\n", status)); + return FALSE; + } + } + + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, + ("Bytes Per Block: %d bytes, Block Count:%d \n", + maxBlockSize, maxBlocks)); + } else { + AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, + ("Function does not support Block Mode!\n")); + return FALSE; + } + + /* Allocate the slot current */ + status = SDLIB_GetDefaultOpCurrent(handle, &slotCurrent.SlotCurrent); + if (SDIO_SUCCESS(status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Allocating Slot current: %d mA\n", + slotCurrent.SlotCurrent)); + status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_ALLOC_SLOT_CURRENT, + &slotCurrent, sizeof(slotCurrent)); + if (!SDIO_SUCCESS(status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, + ("Failed to allocate slot current %d\n", status)); + return FALSE; + } + } + + /* Enable the dragon function */ + count = 0; + enabled = FALSE; + fData.TimeOut = 1; + fData.EnableFlags = SDCONFIG_ENABLE_FUNC; + while ((count++ < SDWLAN_ENABLE_DISABLE_TIMEOUT) && !enabled) + { + /* Enable dragon */ + status = SDLIB_IssueConfig(handle, SDCONFIG_FUNC_ENABLE_DISABLE, + &fData, sizeof(fData)); + if (!SDIO_SUCCESS(status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, + ("Attempting to enable the card again\n")); + continue; + } + + /* Mark the status as enabled */ + enabled = TRUE; + } + + /* Check if we were succesful in enabling the target */ + if (!enabled) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, + ("Failed to communicate with the target\n")); + return FALSE; + } + + /* Allocate the bus requests to be used later */ + A_MEMZERO(busRequest, sizeof(busRequest)); + for (count = 0; count < BUS_REQUEST_MAX_NUM; count ++) { + if ((busRequest[count].request = SDDeviceAllocRequest(handle)) == NULL){ + AR_DEBUG_PRINTF(ATH_DEBUG_ERROR, ("Unable to allocate memory\n")); + /* TODO: Free the memory that has already been allocated */ + return FALSE; + } + hifFreeBusRequest(&busRequest[count]); + + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, + ("0x%08x = busRequest[%d].request = 0x%08x\n", + (unsigned int) &busRequest[count], count, + (unsigned int) busRequest[count].request)); + } + + /* Schedule a worker to handle device inserted, this is a temporary workaround + * to fix a deadlock if the device fails to intialize in the insertion handler + * The failure causes the instance to shutdown the HIF layer and unregister the + * function driver within the busdriver probe context which can deadlock + * + * NOTE: we cannot use the default work queue because that would block + * SD bus request processing for all synchronous I/O. We must use a kernel + * thread that is creating using the helper library. + * */ + + if (SDIO_SUCCESS(SDLIB_OSCreateHelper(&device->insert_helper, + insert_helper_func, + device))) { + device->helper_started = TRUE; + } + + return TRUE; +} + +static THREAD_RETURN insert_helper_func(POSKERNEL_HELPER pHelper) +{ + + /* + * Adding a wait of around a second before we issue the very first + * command to dragon. During the process of loading/unloading the + * driver repeatedly it was observed that we get a data timeout + * while accessing function 1 registers in the chip. The theory at + * this point is that some initialization delay in dragon is + * causing the SDIO state in dragon core to be not ready even after + * the ready bit indicates that function 1 is ready. Accomodating + * for this behavior by adding some delay in the driver before it + * issues the first command after switching on dragon. Need to + * investigate this a bit more - TODO + */ + + A_MDELAY(1000); + /* Inform HTC */ + if ((htcCallbacks.deviceInsertedHandler(SD_GET_OS_HELPER_CONTEXT(pHelper))) != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("Device rejected\n")); + } + + return 0; +} + +void +HIFAckInterrupt(HIF_DEVICE *device) +{ + SDIO_STATUS status; + DBG_ASSERT(device != NULL); + DBG_ASSERT(device->handle != NULL); + + /* Acknowledge our function IRQ */ + status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_ACK_IRQ, + NULL, 0); + DBG_ASSERT(SDIO_SUCCESS(status)); +} + +void +HIFUnMaskInterrupt(HIF_DEVICE *device) +{ + SDIO_STATUS status; + + DBG_ASSERT(device != NULL); + DBG_ASSERT(device->handle != NULL); + + /* Register the IRQ Handler */ + SDDEVICE_SET_IRQ_HANDLER(device->handle, hifIRQHandler, device); + + /* Unmask our function IRQ */ + status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_UNMASK_IRQ, + NULL, 0); + DBG_ASSERT(SDIO_SUCCESS(status)); +} + +void HIFMaskInterrupt(HIF_DEVICE *device) +{ + SDIO_STATUS status; + DBG_ASSERT(device != NULL); + DBG_ASSERT(device->handle != NULL); + + /* Mask our function IRQ */ + status = SDLIB_IssueConfig(device->handle, SDCONFIG_FUNC_MASK_IRQ, + NULL, 0); + DBG_ASSERT(SDIO_SUCCESS(status)); + + /* Unregister the IRQ Handler */ + SDDEVICE_SET_IRQ_HANDLER(device->handle, NULL, NULL); +} + +static BUS_REQUEST *hifAllocateBusRequest(void) +{ + BUS_REQUEST *busrequest; + + /* Acquire lock */ + CriticalSectionAcquire(&lock); + + /* Remove first in list */ + if((busrequest = s_busRequestFreeQueue) != NULL) + { + s_busRequestFreeQueue = busrequest->next; + } + + /* Release lock */ + CriticalSectionRelease(&lock); + + return busrequest; +} + +static void +hifFreeBusRequest(BUS_REQUEST *busrequest) +{ + DBG_ASSERT(busrequest != NULL); + + /* Acquire lock */ + CriticalSectionAcquire(&lock); + + /* Insert first in list */ + busrequest->next = s_busRequestFreeQueue; + s_busRequestFreeQueue = busrequest; + + /* Release lock */ + CriticalSectionRelease(&lock); +} + +void +hifDeviceRemoved(SDFUNCTION *function, SDDEVICE *handle) +{ + A_STATUS status; + HIF_DEVICE *device; + DBG_ASSERT(function != NULL); + DBG_ASSERT(handle != NULL); + + device = getHifDevice(handle); + status = htcCallbacks.deviceRemovedHandler(device->htc_handle, A_OK); + + /* cleanup the helper thread */ + if (device->helper_started) { + SDLIB_OSDeleteHelper(&device->insert_helper); + device->helper_started = FALSE; + } + + delHifDevice(handle); + DBG_ASSERT(status == A_OK); +} + +HIF_DEVICE * +addHifDevice(SDDEVICE *handle) +{ + DBG_ASSERT(handle != NULL); + hifDevice[0].handle = handle; + return &hifDevice[0]; +} + +HIF_DEVICE * +getHifDevice(SDDEVICE *handle) +{ + DBG_ASSERT(handle != NULL); + return &hifDevice[0]; +} + +void +delHifDevice(SDDEVICE *handle) +{ + DBG_ASSERT(handle != NULL); + hifDevice[0].handle = NULL; +} + +struct device* +HIFGetOSDevice(HIF_DEVICE *device) +{ + return &device->handle->Device->dev; +} + +static void ResetAllCards(void) +{ + UINT8 data; + SDIO_STATUS status; + int i; + + data = SDIO_IO_RESET; + + /* set the I/O CARD reset bit: + * NOTE: we are exploiting a "feature" of the SDIO core that resets the core when you + * set the RES bit in the SDIO_IO_ABORT register. This bit however "normally" resets the + * I/O functions leaving the SDIO core in the same state (as per SDIO spec). + * In this design, this reset can be used to reset the SDIO core itself */ + for (i = 0; i < HIF_MAX_DEVICES; i++) { + if (hifDevice[i].handle != NULL) { + AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, + ("Issuing I/O Card reset for instance: %d \n",i)); + /* set the I/O Card reset bit */ + status = SDLIB_IssueCMD52(hifDevice[i].handle, + 0, /* function 0 space */ + SDIO_IO_ABORT_REG, + &data, + 1, /* 1 byte */ + TRUE); /* write */ + } + } + +} + +void HIFSetHandle(void *hif_handle, void *handle) +{ + HIF_DEVICE *device = (HIF_DEVICE *) hif_handle; + + device->htc_handle = handle; + + return; +} diff --git a/drivers/ar6000/hif/hif2.c b/drivers/ar6000/hif/hif2.c new file mode 100644 index 00000000000..386d96e668f --- /dev/null +++ b/drivers/ar6000/hif/hif2.c @@ -0,0 +1,768 @@ +/* + * hif2.c - HIF layer re-implementation for the Linux SDIO stack + * + * Copyright (C) 2008, 2009 by OpenMoko, Inc. + * Written by Werner Almesberger <werner@openmoko.org> + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Based on: + * + * @abstract: HIF layer reference implementation for Atheros SDIO stack + * @notice: Copyright (c) 2004-2006 Atheros Communications Inc. + */ + + +#include <linux/kernel.h> +#include <linux/kthread.h> +#include <linux/list.h> +#include <linux/wait.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/sched.h> +#include <linux/mmc/sdio_func.h> +#include <linux/mmc/sdio.h> +#include <linux/mmc/sdio_ids.h> + +#include "athdefs.h" +#include "a_types.h" +#include "hif.h" + + +/* @@@ Hack - this wants cleaning up */ + +#ifdef CONFIG_MACH_NEO1973_GTA02 + +#include <mach/gta02-pm-wlan.h> + +#else /* CONFIG_MACH_NEO1973_GTA02 */ + +#define gta02_wlan_query_rfkill_lock() 1 +#define gta02_wlan_set_rfkill_cb(cb, hif) ((void) cb) +#define gta02_wlan_query_rfkill_unlock() +#define gta02_wlan_clear_rfkill_cb() + +#endif /* !CONFIG_MACH_NEO1973_GTA02 */ + + +/* + * KNOWN BUGS: + * + * - HIF_DEVICE_IRQ_ASYNC_SYNC doesn't work yet (gets MMC errors) + * - latency can reach hundreds of ms, probably because of scheduling delays + * - packets go through about three queues before finally hitting the network + */ + +/* + * Differences from Atheros' HIFs: + * + * - synchronous and asynchronous requests may get reordered with respect to + * each other, e.g., if HIFReadWrite returns for an asynchronous request and + * then HIFReadWrite is called for a synchronous request, the synchronous + * request may be executed before the asynchronous request. + * + * - request queue locking seems unnecessarily complex in the Atheros HIFs. + * + * - Atheros mask interrupts by calling sdio_claim_irq/sdio_release_irq, which + * can cause quite a bit of overhead. This HIF has its own light-weight + * interrupt masking. + * + * - Atheros call deviceInsertedHandler from a thread spawned off the probe or + * device insertion function. The original explanation for the Atheros SDIO + * stack said that this is done because a delay is needed to let the chip + * complete initialization. There is indeed a one second delay in the thread. + * + * The Atheros Linux SDIO HIF removes the delay and only retains the thread. + * Experimentally removing the thread didn't show any conflicts, so let's get + * rid of it for good. + * + * - The Atheros SDIO stack with Samuel's driver sets SDIO_CCCR_POWER in + * SDIO_POWER_EMPC. Atheros' Linux SDIO code apparently doesn't. We don't + * either, and this seems to work fine. + * @@@ Need to check this with Atheros. + */ + + +#define MBOXES 4 + +#define HIF_MBOX_BLOCK_SIZE 128 +#define HIF_MBOX_BASE_ADDR 0x800 +#define HIF_MBOX_WIDTH 0x800 +#define HIF_MBOX_START_ADDR(mbox) \ + (HIF_MBOX_BASE_ADDR+(mbox)*HIF_MBOX_WIDTH) + + +struct hif_device { + void *htc_handle; + struct sdio_func *func; + + /* + * @@@ our sweet little bit of bogosity - the mechanism that lets us + * use the SDIO stack from softirqs. This really wants to use skbs. + */ + struct list_head queue; + spinlock_t queue_lock; + struct task_struct *io_task; + wait_queue_head_t wait; + + /* + * activate_lock protects "active" and the activation/deactivation + * process itself. + * + * Relation to other locks: The SDIO function can be claimed while + * activate_lock is being held, but trying to acquire activate_lock + * while having ownership of the SDIO function could cause a deadlock. + */ + int active; + struct mutex activate_lock; +}; + +struct hif_request { + struct list_head list; + struct sdio_func *func; + int (*read)(struct sdio_func *func, + void *dst, unsigned int addr, int count); + int (*write)(struct sdio_func *func, + unsigned int addr, void *src, int count); + void *buf; + unsigned long addr; + int len; + A_STATUS (*completion)(void *context, A_STATUS status); + void *context; +}; + + +static HTC_CALLBACKS htcCallbacks; + +/* + * shutdown_lock prevents recursion through HIFShutDownDevice + */ +static DEFINE_MUTEX(shutdown_lock); + + +/* ----- Request processing ------------------------------------------------ */ + + +static A_STATUS process_request(struct hif_request *req) +{ + int ret; + A_STATUS status; + + dev_dbg(&req->func->dev, "process_request(req %p)\n", req); + sdio_claim_host(req->func); + if (req->read) { + ret = req->read(req->func, req->buf, req->addr, req->len); + } else { + ret = req->write(req->func, req->addr, req->buf, req->len); + } + sdio_release_host(req->func); + status = ret ? A_ERROR : A_OK; + if (req->completion) + req->completion(req->context, status); + kfree(req); + return status; +} + + +static void enqueue_request(struct hif_device *hif, struct hif_request *req) +{ + unsigned long flags; + + dev_dbg(&req->func->dev, "enqueue_request(req %p)\n", req); + spin_lock_irqsave(&hif->queue_lock, flags); + list_add_tail(&req->list, &hif->queue); + spin_unlock_irqrestore(&hif->queue_lock, flags); + wake_up(&hif->wait); +} + + +static struct hif_request *dequeue_request(struct hif_device *hif) +{ + struct hif_request *req; + unsigned long flags; + + spin_lock_irqsave(&hif->queue_lock, flags); + if (list_empty(&hif->queue)) + req = NULL; + else { + req = list_first_entry(&hif->queue, + struct hif_request, list); + list_del(&req->list); + } + spin_unlock_irqrestore(&hif->queue_lock, flags); + return req; +} + + +static void wait_queue_empty(struct hif_device *hif) +{ + unsigned long flags; + int empty; + + while (1) { + spin_lock_irqsave(&hif->queue_lock, flags); + empty = list_empty(&hif->queue); + spin_unlock_irqrestore(&hif->queue_lock, flags); + if (empty) + break; + else + yield(); + } +} + + +static int io(void *data) +{ + struct hif_device *hif = data; + struct sched_param param = { .sched_priority = 2 }; + /* one priority level slower than ksdioirqd (which is at 1) */ + DEFINE_WAIT(wait); + struct hif_request *req; + + sched_setscheduler(current, SCHED_FIFO, ¶m); + + while (1) { + while (1) { + /* + * Since we never use signals here, one might think + * that this ought to be TASK_UNINTERRUPTIBLE. However, + * such a task would increase the load average and, + * worse, it would trigger the softlockup check. + */ + prepare_to_wait(&hif->wait, &wait, TASK_INTERRUPTIBLE); + if (kthread_should_stop()) { + finish_wait(&hif->wait, &wait); + return 0; + } + req = dequeue_request(hif); + if (req) + break; + schedule(); + } + finish_wait(&hif->wait, &wait); + + (void) process_request(req); + } + return 0; +} + + +A_STATUS HIFReadWrite(HIF_DEVICE *hif, A_UINT32 address, A_UCHAR *buffer, + A_UINT32 length, A_UINT32 request, void *context) +{ + struct device *dev = HIFGetOSDevice(hif); + struct hif_request *req; + + dev_dbg(dev, "HIFReadWrite(device %p, address 0x%x, buffer %p, " + "length %d, request 0x%x, context %p)\n", + hif, address, buffer, length, request, context); + + BUG_ON(!(request & (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS))); + BUG_ON(!(request & (HIF_BYTE_BASIS | HIF_BLOCK_BASIS))); + BUG_ON(!(request & (HIF_READ | HIF_WRITE))); + BUG_ON(!(request & HIF_EXTENDED_IO)); + + if (address >= HIF_MBOX_START_ADDR(0) && + address < HIF_MBOX_START_ADDR(MBOXES+1)) { + BUG_ON(length > HIF_MBOX_WIDTH); + /* Adjust the address so that the last byte falls on the EOM + address. */ + address += HIF_MBOX_WIDTH-length; + } + + req = kzalloc(sizeof(*req), GFP_ATOMIC); + if (!req) { + if (request & HIF_ASYNCHRONOUS) + htcCallbacks.rwCompletionHandler(context, A_ERROR); + return A_ERROR; + } + + req->func = hif->func; + req->addr = address; + req->buf = buffer; + req->len = length; + + if (request & HIF_READ) { + if (request & HIF_FIXED_ADDRESS) + req->read = sdio_readsb; + else + req->read = sdio_memcpy_fromio; + } else { + if (request & HIF_FIXED_ADDRESS) + req->write = sdio_writesb; + else + req->write = sdio_memcpy_toio; + } + + if (!(request & HIF_ASYNCHRONOUS)) + return process_request(req); + + req->completion = htcCallbacks.rwCompletionHandler; + req->context = context; + enqueue_request(hif, req); + + return A_OK; +} + + +/* ----- Interrupt handling ------------------------------------------------ */ + +/* + * Volatile ought to be good enough to make gcc do the right thing on S3C24xx. + * No need to use atomic or put barriers, keeping the code more readable. + * + * Warning: this story changes if going SMP/SMT. + */ + +static volatile int masked = 1; +static volatile int pending; +static volatile int in_interrupt; + + +static void ar6000_do_irq(struct sdio_func *func) +{ + HIF_DEVICE *hif = sdio_get_drvdata(func); + struct device *dev = HIFGetOSDevice(hif); + A_STATUS status; + + dev_dbg(dev, "ar6000_do_irq -> %p\n", htcCallbacks.dsrHandler); + + status = htcCallbacks.dsrHandler(hif->htc_handle); + BUG_ON(status != A_OK); +} + + +static void sdio_ar6000_irq(struct sdio_func *func) +{ + HIF_DEVICE *hif = sdio_get_drvdata(func); + struct device *dev = HIFGetOSDevice(hif); + + dev_dbg(dev, "sdio_ar6000_irq\n"); + + in_interrupt = 1; + if (masked) { + in_interrupt = 0; + pending++; + return; + } + /* + * @@@ This is ugly. If we don't drop the lock, we'll deadlock when + * the handler tries to do SDIO. So there are four choices: + * + * 1) Break the call chain by calling the callback from a workqueue. + * Ugh. + * 2) Make process_request aware that we already have the lock. + * 3) Drop the lock. Which is ugly but should be safe as long as we're + * making sure the device doesn't go away. + * 4) Change the AR6k driver such that it only issues asynchronous + * quests when called from an interrupt. + * + * Solution 2) is probably the best for now. Will try it later. + */ + sdio_release_host(func); + ar6000_do_irq(func); + sdio_claim_host(func); + in_interrupt = 0; +} + + +void HIFAckInterrupt(HIF_DEVICE *hif) +{ + struct device *dev = HIFGetOSDevice(hif); + + dev_dbg(dev, "HIFAckInterrupt\n"); + /* do nothing */ +} + + +void HIFUnMaskInterrupt(HIF_DEVICE *hif) +{ + struct device *dev = HIFGetOSDevice(hif); + + dev_dbg(dev, "HIFUnMaskInterrupt\n"); + do { + masked = 1; + if (pending) { + pending = 0; + ar6000_do_irq(hif->func); + /* We may take an interrupt before unmasking and thus + get it pending. In this case, we just loop back. */ + } + masked = 0; + } + while (pending); +} + + +void HIFMaskInterrupt(HIF_DEVICE *hif) +{ + struct device *dev = HIFGetOSDevice(hif); + + dev_dbg(dev, "HIFMaskInterrupt\n"); + /* + * Since sdio_ar6000_irq can also be called from a process context, we + * may conceivably end up racing with it. Thus, we need to wait until + * we can be sure that no concurrent interrupt processing is going on + * before we return. + * + * Note: this may be a bit on the paranoid side - the callers may + * actually be nice enough to disable scheduling. Check later. + */ + masked = 1; + while (in_interrupt) + yield(); +} + + +/* ----- HIF API glue functions -------------------------------------------- */ + + +struct device *HIFGetOSDevice(HIF_DEVICE *hif) +{ + return &hif->func->dev; +} + + +void HIFSetHandle(void *hif_handle, void *handle) +{ + HIF_DEVICE *hif = (HIF_DEVICE *) hif_handle; + + hif->htc_handle = handle; +} + + +/* ----- Device configuration (HIF side) ----------------------------------- */ + + +A_STATUS HIFConfigureDevice(HIF_DEVICE *hif, + HIF_DEVICE_CONFIG_OPCODE opcode, void *config, A_UINT32 configLen) +{ + struct device *dev = HIFGetOSDevice(hif); + HIF_DEVICE_IRQ_PROCESSING_MODE *ipm_cfg = config; + A_UINT32 *mbs_cfg = config; + int i; + + dev_dbg(dev, "HIFConfigureDevice\n"); + + switch (opcode) { + case HIF_DEVICE_GET_MBOX_BLOCK_SIZE: + for (i = 0; i != MBOXES; i++) + mbs_cfg[i] = HIF_MBOX_BLOCK_SIZE; + break; + case HIF_DEVICE_GET_MBOX_ADDR: + for (i = 0; i != MBOXES; i++) + mbs_cfg[i] = HIF_MBOX_START_ADDR(i); + break; + case HIF_DEVICE_GET_IRQ_PROC_MODE: + *ipm_cfg = HIF_DEVICE_IRQ_SYNC_ONLY; +// *ipm_cfg = HIF_DEVICE_IRQ_ASYNC_SYNC; + break; + default: + return A_ERROR; + } + return A_OK; +} + + +/* ----- Device probe and removal (Linux side) ----------------------------- */ + + +static int ar6000_do_activate(struct hif_device *hif) +{ + struct sdio_func *func = hif->func; + struct device *dev = &func->dev; + int ret; + + dev_dbg(dev, "ar6000_do_activate\n"); + + sdio_claim_host(func); + sdio_enable_func(func); + + INIT_LIST_HEAD(&hif->queue); + init_waitqueue_head(&hif->wait); + spin_lock_init(&hif->queue_lock); + + ret = sdio_set_block_size(func, HIF_MBOX_BLOCK_SIZE); + if (ret < 0) { + dev_err(dev, "sdio_set_block_size returns %d\n", ret); + goto out_enabled; + } + ret = sdio_claim_irq(func, sdio_ar6000_irq); + if (ret) { + dev_err(dev, "sdio_claim_irq returns %d\n", ret); + goto out_enabled; + } + /* Set SDIO_BUS_CD_DISABLE in SDIO_CCCR_IF ? */ +#if 0 + sdio_f0_writeb(func, SDIO_CCCR_CAP_E4MI, SDIO_CCCR_CAPS, &ret); + if (ret) { + dev_err(dev, "sdio_f0_writeb(SDIO_CCCR_CAPS) returns %d\n", + ret); + goto out_got_irq; + } +#else + if (0) /* avoid warning */ + goto out_got_irq; +#endif + + sdio_release_host(func); + + hif->io_task = kthread_run(io, hif, "ar6000_io"); + ret = IS_ERR(hif->io_task); + if (ret) { + dev_err(dev, "kthread_run(ar6000_io): %d\n", ret); + goto out_func_ready; + } + + ret = htcCallbacks.deviceInsertedHandler(hif); + if (ret == A_OK) + return 0; + + dev_err(dev, "deviceInsertedHandler: %d\n", ret); + + ret = kthread_stop(hif->io_task); + if (ret) + dev_err(dev, "kthread_stop (ar6000_io): %d\n", ret); + +out_func_ready: + sdio_claim_host(func); + +out_got_irq: + sdio_release_irq(func); + +out_enabled: + sdio_disable_func(func); + sdio_release_host(func); + + return ret; +} + + +static void ar6000_do_deactivate(struct hif_device *hif) +{ + struct sdio_func *func = hif->func; + struct device *dev = &func->dev; + int ret; + + dev_dbg(dev, "ar6000_do_deactivate\n"); + if (!hif->active) + return; + + if (mutex_trylock(&shutdown_lock)) { + /* + * Funny, Atheros' HIF does this call, but this just puts us in + * a recursion through HTCShutDown/HIFShutDown if unloading the + * module. + * + * However, we need it for suspend/resume. See the comment at + * HIFShutDown, below. + */ + ret = htcCallbacks.deviceRemovedHandler(hif->htc_handle, A_OK); + if (ret != A_OK) + dev_err(dev, "deviceRemovedHandler: %d\n", ret); + mutex_unlock(&shutdown_lock); + } + wait_queue_empty(hif); + ret = kthread_stop(hif->io_task); + if (ret) + dev_err(dev, "kthread_stop (ar6000_io): %d\n", ret); + sdio_claim_host(func); + sdio_release_irq(func); + sdio_disable_func(func); + sdio_release_host(func); +} + + +static int ar6000_activate(struct hif_device *hif) +{ + int ret = 0; + + dev_dbg(&hif->func->dev, "ar6000_activate\n"); + mutex_lock(&hif->activate_lock); + if (!hif->active) { + ret = ar6000_do_activate(hif); + if (ret) { + printk(KERN_ERR "%s: Failed to activate %d\n", + __func__, ret); + goto out; + } + hif->active = 1; + } +out: + mutex_unlock(&hif->activate_lock); + return ret; +} + + +static void ar6000_deactivate(struct hif_device *hif) +{ + dev_dbg(&hif->func->dev, "ar6000_deactivate\n"); + mutex_lock(&hif->activate_lock); + if (hif->active) { + ar6000_do_deactivate(hif); + hif->active = 0; + } + mutex_unlock(&hif->activate_lock); +} + + +static int ar6000_rfkill_cb(void *data, int on) +{ + struct hif_device *hif = data; + struct sdio_func *func = hif->func; + struct device *dev = &func->dev; + + dev_dbg(dev, "ar6000_rfkill_cb: on %d\n", on); + if (on) + return ar6000_activate(hif); + ar6000_deactivate(hif); + return 0; +} + + +static int sdio_ar6000_probe(struct sdio_func *func, + const struct sdio_device_id *id) +{ + struct device *dev = &func->dev; + struct hif_device *hif; + int ret = 0; + + dev_dbg(dev, "sdio_ar6000_probe\n"); + BUG_ON(!htcCallbacks.deviceInsertedHandler); + + hif = kzalloc(sizeof(*hif), GFP_KERNEL); + if (!hif) + return -ENOMEM; + + sdio_set_drvdata(func, hif); + hif->func = func; + mutex_init(&hif->activate_lock); + hif->active = 0; + + if (gta02_wlan_query_rfkill_lock()) + ret = ar6000_activate(hif); + if (!ret) { + gta02_wlan_set_rfkill_cb(ar6000_rfkill_cb, hif); + return 0; + } + gta02_wlan_query_rfkill_unlock(); + sdio_set_drvdata(func, NULL); + kfree(hif); + return ret; +} + + +static void sdio_ar6000_remove(struct sdio_func *func) +{ + struct device *dev = &func->dev; + HIF_DEVICE *hif = sdio_get_drvdata(func); + + dev_dbg(dev, "sdio_ar6000_remove\n"); + gta02_wlan_clear_rfkill_cb(); + ar6000_deactivate(hif); + sdio_set_drvdata(func, NULL); + kfree(hif); +} + + +/* ----- Device registration/unregistration (called by HIF) ---------------- */ + + +#define ATHEROS_SDIO_DEVICE(id, offset) \ + SDIO_DEVICE(SDIO_VENDOR_ID_ATHEROS, SDIO_DEVICE_ID_ATHEROS_##id | (offset)) + +static const struct sdio_device_id sdio_ar6000_ids[] = { + { ATHEROS_SDIO_DEVICE(AR6002, 0) }, + { ATHEROS_SDIO_DEVICE(AR6002, 0x1) }, + { ATHEROS_SDIO_DEVICE(AR6001, 0x8) }, + { ATHEROS_SDIO_DEVICE(AR6001, 0x9) }, + { ATHEROS_SDIO_DEVICE(AR6001, 0xa) }, + { ATHEROS_SDIO_DEVICE(AR6001, 0xb) }, + { /* end: all zeroes */ }, +}; + +MODULE_DEVICE_TABLE(sdio, sdio_ar6000_ids); + + +static struct sdio_driver sdio_ar6000_driver = { + .probe = sdio_ar6000_probe, + .remove = sdio_ar6000_remove, + .name = "sdio_ar6000", + .id_table = sdio_ar6000_ids, +}; + + +int HIFInit(HTC_CALLBACKS *callbacks) +{ + int ret; + + BUG_ON(!callbacks); + + printk(KERN_DEBUG "HIFInit\n"); + htcCallbacks = *callbacks; + + ret = sdio_register_driver(&sdio_ar6000_driver); + if (ret) { + printk(KERN_ERR + "sdio_register_driver(sdio_ar6000_driver): %d\n", ret); + return A_ERROR; + } + + return 0; +} + + +/* + * We have four possible call chains here: + * + * System shutdown/reboot: + * + * kernel_restart_prepare ...> device_shutdown ... > s3cmci_shutdown -> + * mmc_remove_host ..> sdio_bus_remove -> sdio_ar6000_remove -> + * ar6000_deactivate -> ar6000_do_deactivate -> + * deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice + * + * This is roughly the same sequence as suspend, described below. + * + * Module removal: + * + * sys_delete_module -> ar6000_cleanup_module -> HTCShutDown -> + * HIFShutDownDevice -> sdio_unregister_driver ...> sdio_bus_remove -> + * sdio_ar6000_remove -> ar6000_deactivate -> ar6000_do_deactivate + * + * In this case, HIFShutDownDevice must call sdio_unregister_driver to + * notify the driver about its removal. ar6000_do_deactivate must not call + * deviceRemovedHandler, because that would loop back into HIFShutDownDevice. + * + * Suspend: + * + * device_suspend ...> s3cmci_suspend ...> sdio_bus_remove -> + * sdio_ar6000_remove -> ar6000_deactivate -> ar6000_do_deactivate -> + * deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice + * + * We must call deviceRemovedHandler to inform the ar6k stack that the device + * has been removed. Since HTCTargetRemovedHandler calls back into + * HIFShutDownDevice, we must also prevent the call to + * sdio_unregister_driver, or we'd end up recursing into the SDIO stack, + * eventually deadlocking somewhere. + * + * rfkill: + * + * rfkill_state_store -> rfkill_toggle_radio -> gta02_wlan_toggle_radio -> + * ar6000_rfkill_cb -> ar6000_deactivate -> ar6000_do_deactivate -> + * deviceRemovedHandler (HTCTargetRemovedHandler) -> HIFShutDownDevice + * + * This is similar to suspend - only the entry point changes. + */ + +void HIFShutDownDevice(HIF_DEVICE *hif) +{ + /* Beware, HTCShutDown calls us with hif == NULL ! */ + if (mutex_trylock(&shutdown_lock)) { + sdio_unregister_driver(&sdio_ar6000_driver); + mutex_unlock(&shutdown_lock); + } +} diff --git a/drivers/ar6000/hif/hif_internal.h b/drivers/ar6000/hif/hif_internal.h new file mode 100644 index 00000000000..d8fc1013234 --- /dev/null +++ b/drivers/ar6000/hif/hif_internal.h @@ -0,0 +1,102 @@ +/* + * @file: hif_internal.h + * + * @abstract: internal header file for hif layer + * + * @notice: Copyright (c) 2004-2006 Atheros Communications Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include <linux/sdio/ctsystem.h> +#include <linux/sdio/sdio_busdriver.h> +#include <linux/sdio/_sdio_defs.h> +#include <linux/sdio/sdio_lib.h> +#include "a_config.h" +#include "athdefs.h" +#include "a_types.h" +#include "a_osapi.h" +#include "hif.h" + +#define MANUFACTURER_ID_AR6001_BASE 0x100 +#define MANUFACTURER_ID_AR6002_BASE 0x200 +#define FUNCTION_CLASS 0x0 +#define MANUFACTURER_CODE 0x271 + +#define BUS_REQUEST_MAX_NUM 64 + +#define SDIO_CLOCK_FREQUENCY_DEFAULT 25000000 +#define SDWLAN_ENABLE_DISABLE_TIMEOUT 20 +#define FLAGS_CARD_ENAB 0x02 +#define FLAGS_CARD_IRQ_UNMSK 0x04 + +#define HIF_MBOX_BLOCK_SIZE 128 +#define HIF_MBOX_BASE_ADDR 0x800 +#define HIF_MBOX_WIDTH 0x800 +#define HIF_MBOX0_BLOCK_SIZE 1 +#define HIF_MBOX1_BLOCK_SIZE HIF_MBOX_BLOCK_SIZE +#define HIF_MBOX2_BLOCK_SIZE HIF_MBOX_BLOCK_SIZE +#define HIF_MBOX3_BLOCK_SIZE HIF_MBOX_BLOCK_SIZE + +#define HIF_MBOX_START_ADDR(mbox) \ + HIF_MBOX_BASE_ADDR + mbox * HIF_MBOX_WIDTH + +#define HIF_MBOX_END_ADDR(mbox) \ + HIF_MBOX_START_ADDR(mbox) + HIF_MBOX_WIDTH - 1 + +struct hif_device { + SDDEVICE *handle; + void *htc_handle; + OSKERNEL_HELPER insert_helper; + BOOL helper_started; +}; + +typedef struct target_function_context { + SDFUNCTION function; /* function description of the bus driver */ + OS_SEMAPHORE instanceSem; /* instance lock. Unused */ + SDLIST instanceList; /* list of instances. Unused */ +} TARGET_FUNCTION_CONTEXT; + +typedef struct bus_request { + struct bus_request *next; + SDREQUEST *request; + void *context; +} BUS_REQUEST; + +BOOL +hifDeviceInserted(SDFUNCTION *function, SDDEVICE *device); + +void +hifDeviceRemoved(SDFUNCTION *function, SDDEVICE *device); + +SDREQUEST * +hifAllocateDeviceRequest(SDDEVICE *device); + +void +hifFreeDeviceRequest(SDREQUEST *request); + +void +hifRWCompletionHandler(SDREQUEST *request); + +void +hifIRQHandler(void *context); + +HIF_DEVICE * +addHifDevice(SDDEVICE *handle); + +HIF_DEVICE * +getHifDevice(SDDEVICE *handle); + +void +delHifDevice(SDDEVICE *handle); diff --git a/drivers/ar6000/htc/ar6k.c b/drivers/ar6000/htc/ar6k.c new file mode 100644 index 00000000000..72472abb0d8 --- /dev/null +++ b/drivers/ar6000/htc/ar6k.c @@ -0,0 +1,991 @@ +/* + * AR6K device layer that handles register level I/O + * + * Copyright (c) 2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ +#include "a_config.h" +#include "athdefs.h" +#include "a_types.h" +#include "AR6Khwreg.h" +#include "a_osapi.h" +#include "a_debug.h" +#include "hif.h" +#include "htc_packet.h" +#include "ar6k.h" + +#define MAILBOX_FOR_BLOCK_SIZE 1 + +extern A_UINT32 resetok; + +static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev); +static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev); + +#define LOCK_AR6K(p) A_MUTEX_LOCK(&(p)->Lock); +#define UNLOCK_AR6K(p) A_MUTEX_UNLOCK(&(p)->Lock); + +void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket) +{ + LOCK_AR6K(pDev); + HTC_PACKET_ENQUEUE(&pDev->RegisterIOList,pPacket); + UNLOCK_AR6K(pDev); +} + +HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev) +{ + HTC_PACKET *pPacket; + + LOCK_AR6K(pDev); + pPacket = HTC_PACKET_DEQUEUE(&pDev->RegisterIOList); + UNLOCK_AR6K(pDev); + + return pPacket; +} + +A_STATUS DevSetup(AR6K_DEVICE *pDev) +{ + A_UINT32 mailboxaddrs[AR6K_MAILBOXES]; + A_UINT32 blocksizes[AR6K_MAILBOXES]; + A_STATUS status = A_OK; + int i; + + AR_DEBUG_ASSERT(AR6K_IRQ_PROC_REGS_SIZE == 16); + AR_DEBUG_ASSERT(AR6K_IRQ_ENABLE_REGS_SIZE == 4); + + do { + /* give a handle to HIF for this target */ + HIFSetHandle(pDev->HIFDevice, (void *)pDev); + /* initialize our free list of IO packets */ + INIT_HTC_PACKET_QUEUE(&pDev->RegisterIOList); + A_MUTEX_INIT(&pDev->Lock); + + /* get the addresses for all 4 mailboxes */ + status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR, + mailboxaddrs, sizeof(mailboxaddrs)); + + if (status != A_OK) { + AR_DEBUG_ASSERT(FALSE); + break; + } + + /* carve up register I/O packets (these are for ASYNC register I/O ) */ + for (i = 0; i < AR6K_MAX_REG_IO_BUFFERS; i++) { + HTC_PACKET *pIOPacket; + pIOPacket = &pDev->RegIOBuffers[i].HtcPacket; + SET_HTC_PACKET_INFO_RX_REFILL(pIOPacket, + pDev, + pDev->RegIOBuffers[i].Buffer, + AR6K_REG_IO_BUFFER_SIZE, + 0); /* don't care */ + AR6KFreeIOPacket(pDev,pIOPacket); + } + + /* get the address of the mailbox we are using */ + pDev->MailboxAddress = mailboxaddrs[HTC_MAILBOX]; + + /* get the block sizes */ + status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE, + blocksizes, sizeof(blocksizes)); + + if (status != A_OK) { + AR_DEBUG_ASSERT(FALSE); + break; + } + + /* note: we actually get the block size of a mailbox other than 0, for SDIO the block + * size on mailbox 0 is artificially set to 1. So we use the block size that is set + * for the other 3 mailboxes */ + pDev->BlockSize = blocksizes[MAILBOX_FOR_BLOCK_SIZE]; + /* must be a power of 2 */ + AR_DEBUG_ASSERT((pDev->BlockSize & (pDev->BlockSize - 1)) == 0); + + /* assemble mask, used for padding to a block */ + pDev->BlockMask = pDev->BlockSize - 1; + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("BlockSize: %d, MailboxAddress:0x%X \n", + pDev->BlockSize, pDev->MailboxAddress)); + + pDev->GetPendingEventsFunc = NULL; + /* see if the HIF layer implements the get pending events function */ + HIFConfigureDevice(pDev->HIFDevice, + HIF_DEVICE_GET_PENDING_EVENTS_FUNC, + &pDev->GetPendingEventsFunc, + sizeof(pDev->GetPendingEventsFunc)); + + /* assume we can process HIF interrupt events asynchronously */ + pDev->HifIRQProcessingMode = HIF_DEVICE_IRQ_ASYNC_SYNC; + + /* see if the HIF layer overrides this assumption */ + HIFConfigureDevice(pDev->HIFDevice, + HIF_DEVICE_GET_IRQ_PROC_MODE, + &pDev->HifIRQProcessingMode, + sizeof(pDev->HifIRQProcessingMode)); + + switch (pDev->HifIRQProcessingMode) { + case HIF_DEVICE_IRQ_SYNC_ONLY: + AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is SYNC ONLY\n")); + break; + case HIF_DEVICE_IRQ_ASYNC_SYNC: + AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF Interrupt processing is ASYNC and SYNC\n")); + break; + default: + AR_DEBUG_ASSERT(FALSE); + } + + pDev->HifMaskUmaskRecvEvent = NULL; + + /* see if the HIF layer implements the mask/unmask recv events function */ + HIFConfigureDevice(pDev->HIFDevice, + HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC, + &pDev->HifMaskUmaskRecvEvent, + sizeof(pDev->HifMaskUmaskRecvEvent)); + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("HIF special overrides : 0x%X , 0x%X\n", + (A_UINT32)pDev->GetPendingEventsFunc, (A_UINT32)pDev->HifMaskUmaskRecvEvent)); + + status = DevDisableInterrupts(pDev); + + } while (FALSE); + + if (A_FAILED(status)) { + /* make sure handle is cleared */ + HIFSetHandle(pDev->HIFDevice, NULL); + } + + return status; + +} + +static A_STATUS DevEnableInterrupts(AR6K_DEVICE *pDev) +{ + A_STATUS status; + AR6K_IRQ_ENABLE_REGISTERS regs; + + LOCK_AR6K(pDev); + + /* Enable all the interrupts except for the dragon interrupt */ + pDev->IrqEnableRegisters.int_status_enable = INT_STATUS_ENABLE_ERROR_SET(0x01) | + INT_STATUS_ENABLE_CPU_SET(0x01) | + INT_STATUS_ENABLE_COUNTER_SET(0x01); + + if (NULL == pDev->GetPendingEventsFunc) { + pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01); + } else { + /* The HIF layer provided us with a pending events function which means that + * the detection of pending mbox messages is handled in the HIF layer. + * This is the case for the SPI2 interface. + * In the normal case we enable MBOX interrupts, for the case + * with HIFs that offer this mechanism, we keep these interrupts + * masked */ + pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01); + } + + + /* Set up the CPU Interrupt Status Register */ + pDev->IrqEnableRegisters.cpu_int_status_enable = CPU_INT_STATUS_ENABLE_BIT_SET(0x00); + + /* Set up the Error Interrupt Status Register */ + pDev->IrqEnableRegisters.error_status_enable = + ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(0x01) | + ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(0x01); + + /* Set up the Counter Interrupt Status Register (only for debug interrupt to catch fatal errors) */ + pDev->IrqEnableRegisters.counter_int_status_enable = + COUNTER_INT_STATUS_ENABLE_BIT_SET(AR6K_TARGET_DEBUG_INTR_MASK); + + /* copy into our temp area */ + A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE); + + UNLOCK_AR6K(pDev); + + /* always synchronous */ + status = HIFReadWrite(pDev->HIFDevice, + INT_STATUS_ENABLE_ADDRESS, + ®s.int_status_enable, + AR6K_IRQ_ENABLE_REGS_SIZE, + HIF_WR_SYNC_BYTE_INC, + NULL); + + if (status != A_OK) { + /* Can't write it for some reason */ + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + ("Failed to update interrupt control registers err: %d\n", status)); + + } + + return status; +} + +static A_STATUS DevDisableInterrupts(AR6K_DEVICE *pDev) +{ + AR6K_IRQ_ENABLE_REGISTERS regs; + + LOCK_AR6K(pDev); + /* Disable all interrupts */ + pDev->IrqEnableRegisters.int_status_enable = 0; + pDev->IrqEnableRegisters.cpu_int_status_enable = 0; + pDev->IrqEnableRegisters.error_status_enable = 0; + pDev->IrqEnableRegisters.counter_int_status_enable = 0; + /* copy into our temp area */ + A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE); + + UNLOCK_AR6K(pDev); + + /* always synchronous */ + return HIFReadWrite(pDev->HIFDevice, + INT_STATUS_ENABLE_ADDRESS, + ®s.int_status_enable, + AR6K_IRQ_ENABLE_REGS_SIZE, + HIF_WR_SYNC_BYTE_INC, + NULL); +} + +/* enable device interrupts */ +A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev) +{ + /* Unmask the host controller interrupts */ + HIFUnMaskInterrupt(pDev->HIFDevice); + + return DevEnableInterrupts(pDev); +} + +/* disable all device interrupts */ +A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev) +{ + A_STATUS status; + + status = DevDisableInterrupts(pDev); + + if (A_SUCCESS(status)) { + /* Disable the interrupt at the HIF layer */ + HIFMaskInterrupt(pDev->HIFDevice); + } + + return status; +} + +/* callback when our fetch to enable/disable completes */ +static void DevDoEnableDisableRecvAsyncHandler(void *Context, HTC_PACKET *pPacket) +{ + AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context; + + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDoEnableDisableRecvAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev)); + + if (A_FAILED(pPacket->Status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + (" Failed to disable receiver, status:%d \n", pPacket->Status)); + } + /* free this IO packet */ + AR6KFreeIOPacket(pDev,pPacket); + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDoEnableDisableRecvAsyncHandler \n")); +} + +/* disable packet reception (used in case the host runs out of buffers) + * this is the "override" method when the HIF reports another methods to + * disable recv events */ +static A_STATUS DevDoEnableDisableRecvOverride(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode) +{ + A_STATUS status = A_OK; + HTC_PACKET *pIOPacket = NULL; + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("DevDoEnableDisableRecvOverride: Enable:%d Mode:%d\n", + EnableRecv,AsyncMode)); + + do { + + if (AsyncMode) { + + pIOPacket = AR6KAllocIOPacket(pDev); + + if (NULL == pIOPacket) { + status = A_NO_MEMORY; + AR_DEBUG_ASSERT(FALSE); + break; + } + + /* stick in our completion routine when the I/O operation completes */ + pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler; + pIOPacket->pContext = pDev; + + /* call the HIF layer override and do this asynchronously */ + status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice, + EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV, + pIOPacket); + break; + } + + /* if we get here we are doing it synchronously */ + status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice, + EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV, + NULL); + + } while (FALSE); + + if (A_FAILED(status) && (pIOPacket != NULL)) { + AR6KFreeIOPacket(pDev,pIOPacket); + } + + return status; +} + +/* disable packet reception (used in case the host runs out of buffers) + * this is the "normal" method using the interrupt enable registers through + * the host I/F */ +static A_STATUS DevDoEnableDisableRecvNormal(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode) +{ + A_STATUS status = A_OK; + HTC_PACKET *pIOPacket = NULL; + AR6K_IRQ_ENABLE_REGISTERS regs; + + /* take the lock to protect interrupt enable shadows */ + LOCK_AR6K(pDev); + + if (EnableRecv) { + pDev->IrqEnableRegisters.int_status_enable |= INT_STATUS_ENABLE_MBOX_DATA_SET(0x01); + } else { + pDev->IrqEnableRegisters.int_status_enable &= ~INT_STATUS_ENABLE_MBOX_DATA_SET(0x01); + } + + /* copy into our temp area */ + A_MEMCPY(®s,&pDev->IrqEnableRegisters,AR6K_IRQ_ENABLE_REGS_SIZE); + UNLOCK_AR6K(pDev); + + do { + + if (AsyncMode) { + + pIOPacket = AR6KAllocIOPacket(pDev); + + if (NULL == pIOPacket) { + status = A_NO_MEMORY; + AR_DEBUG_ASSERT(FALSE); + break; + } + + /* copy values to write to our async I/O buffer */ + A_MEMCPY(pIOPacket->pBuffer,®s,AR6K_IRQ_ENABLE_REGS_SIZE); + + /* stick in our completion routine when the I/O operation completes */ + pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler; + pIOPacket->pContext = pDev; + + /* write it out asynchronously */ + HIFReadWrite(pDev->HIFDevice, + INT_STATUS_ENABLE_ADDRESS, + pIOPacket->pBuffer, + AR6K_IRQ_ENABLE_REGS_SIZE, + HIF_WR_ASYNC_BYTE_INC, + pIOPacket); + break; + } + + /* if we get here we are doing it synchronously */ + + status = HIFReadWrite(pDev->HIFDevice, + INT_STATUS_ENABLE_ADDRESS, + ®s.int_status_enable, + AR6K_IRQ_ENABLE_REGS_SIZE, + HIF_WR_SYNC_BYTE_INC, + NULL); + + } while (FALSE); + + if (A_FAILED(status) && (pIOPacket != NULL)) { + AR6KFreeIOPacket(pDev,pIOPacket); + } + + return status; +} + + +A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode) +{ + if (NULL == pDev->HifMaskUmaskRecvEvent) { + return DevDoEnableDisableRecvNormal(pDev,FALSE,AsyncMode); + } else { + return DevDoEnableDisableRecvOverride(pDev,FALSE,AsyncMode); + } +} + +A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL AsyncMode) +{ + if (NULL == pDev->HifMaskUmaskRecvEvent) { + return DevDoEnableDisableRecvNormal(pDev,TRUE,AsyncMode); + } else { + return DevDoEnableDisableRecvOverride(pDev,TRUE,AsyncMode); + } +} + +void DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS *pIrqProcRegs, + AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs) +{ + + AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("\n<------- Register Table -------->\n")); + + if (pIrqProcRegs != NULL) { + AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, + ("Int Status: 0x%x\n",pIrqProcRegs->host_int_status)); + AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, + ("CPU Int Status: 0x%x\n",pIrqProcRegs->cpu_int_status)); + AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, + ("Error Int Status: 0x%x\n",pIrqProcRegs->error_int_status)); + AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, + ("Counter Int Status: 0x%x\n",pIrqProcRegs->counter_int_status)); + AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, + ("Mbox Frame: 0x%x\n",pIrqProcRegs->mbox_frame)); + AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, + ("Rx Lookahead Valid: 0x%x\n",pIrqProcRegs->rx_lookahead_valid)); + AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, + ("Rx Lookahead 0: 0x%x\n",pIrqProcRegs->rx_lookahead[0])); + AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, + ("Rx Lookahead 1: 0x%x\n",pIrqProcRegs->rx_lookahead[1])); + } + + if (pIrqEnableRegs != NULL) { + AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, + ("Int Status Enable: 0x%x\n",pIrqEnableRegs->int_status_enable)); + AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, + ("Counter Int Status Enable: 0x%x\n",pIrqEnableRegs->counter_int_status_enable)); + AR_DEBUG_PRINTF(ATH_DEBUG_DUMP, ("<------------------------------->\n")); + } +} + + +#ifdef MBOXHW_UNIT_TEST + + +/* This is a mailbox hardware unit test that must be called in a schedulable context + * This test is very simple, it will send a list of buffers with a counting pattern + * and the target will invert the data and send the message back + * + * the unit test has the following constraints: + * + * The target has at least 8 buffers of 256 bytes each. The host will send + * the following pattern of buffers in rapid succession : + * + * 1 buffer - 128 bytes + * 1 buffer - 256 bytes + * 1 buffer - 512 bytes + * 1 buffer - 1024 bytes + * + * The host will send the buffers to one mailbox and wait for buffers to be reflected + * back from the same mailbox. The target sends the buffers FIFO order. + * Once the final buffer has been received for a mailbox, the next mailbox is tested. + * + * + * Note: To simplifythe test , we assume that the chosen buffer sizes + * will fall on a nice block pad + * + * It is expected that higher-order tests will be written to stress the mailboxes using + * a message-based protocol (with some performance timming) that can create more + * randomness in the packets sent over mailboxes. + * + * */ + +#define A_ROUND_UP_PWR2(x, align) (((int) (x) + ((align)-1)) & ~((align)-1)) + +#define BUFFER_BLOCK_PAD 128 + +#if 0 +#define BUFFER1 128 +#define BUFFER2 256 +#define BUFFER3 512 +#define BUFFER4 1024 +#endif + +#if 1 +#define BUFFER1 80 +#define BUFFER2 200 +#define BUFFER3 444 +#define BUFFER4 800 +#endif + +#define TOTAL_BYTES (A_ROUND_UP_PWR2(BUFFER1,BUFFER_BLOCK_PAD) + \ + A_ROUND_UP_PWR2(BUFFER2,BUFFER_BLOCK_PAD) + \ + A_ROUND_UP_PWR2(BUFFER3,BUFFER_BLOCK_PAD) + \ + A_ROUND_UP_PWR2(BUFFER4,BUFFER_BLOCK_PAD) ) + +#define TEST_BYTES (BUFFER1 + BUFFER2 + BUFFER3 + BUFFER4) + +#define TEST_CREDITS_RECV_TIMEOUT 100 + +static A_UINT8 g_Buffer[TOTAL_BYTES]; +static A_UINT32 g_MailboxAddrs[AR6K_MAILBOXES]; +static A_UINT32 g_BlockSizes[AR6K_MAILBOXES]; + +#define BUFFER_PROC_LIST_DEPTH 4 + +typedef struct _BUFFER_PROC_LIST{ + A_UINT8 *pBuffer; + A_UINT32 length; +}BUFFER_PROC_LIST; + + +#define PUSH_BUFF_PROC_ENTRY(pList,len,pCurrpos) \ +{ \ + (pList)->pBuffer = (pCurrpos); \ + (pList)->length = (len); \ + (pCurrpos) += (len); \ + (pList)++; \ +} + +/* a simple and crude way to send different "message" sizes */ +static void AssembleBufferList(BUFFER_PROC_LIST *pList) +{ + A_UINT8 *pBuffer = g_Buffer; + +#if BUFFER_PROC_LIST_DEPTH < 4 +#error "Buffer processing list depth is not deep enough!!" +#endif + + PUSH_BUFF_PROC_ENTRY(pList,BUFFER1,pBuffer); + PUSH_BUFF_PROC_ENTRY(pList,BUFFER2,pBuffer); + PUSH_BUFF_PROC_ENTRY(pList,BUFFER3,pBuffer); + PUSH_BUFF_PROC_ENTRY(pList,BUFFER4,pBuffer); + +} + +#define FILL_ZERO TRUE +#define FILL_COUNTING FALSE +static void InitBuffers(A_BOOL Zero) +{ + A_UINT16 *pBuffer16 = (A_UINT16 *)g_Buffer; + int i; + + /* fill buffer with 16 bit counting pattern or zeros */ + for (i = 0; i < (TOTAL_BYTES / 2) ; i++) { + if (!Zero) { + pBuffer16[i] = (A_UINT16)i; + } else { + pBuffer16[i] = 0; + } + } +} + + +static A_BOOL CheckOneBuffer(A_UINT16 *pBuffer16, int Length) +{ + int i; + A_UINT16 startCount; + A_BOOL success = TRUE; + + /* get the starting count */ + startCount = pBuffer16[0]; + /* invert it, this is the expected value */ + startCount = ~startCount; + /* scan the buffer and verify */ + for (i = 0; i < (Length / 2) ; i++,startCount++) { + /* target will invert all the data */ + if ((A_UINT16)pBuffer16[i] != (A_UINT16)~startCount) { + success = FALSE; + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Invalid Data Got:0x%X, Expecting:0x%X (offset:%d, total:%d) \n", + pBuffer16[i], ((A_UINT16)~startCount), i, Length)); + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("0x%X 0x%X 0x%X 0x%X \n", + pBuffer16[i], pBuffer16[i + 1], pBuffer16[i + 2],pBuffer16[i+3])); + break; + } + } + + return success; +} + +static A_BOOL CheckBuffers(void) +{ + int i; + A_BOOL success = TRUE; + BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH]; + + /* assemble the list */ + AssembleBufferList(checkList); + + /* scan the buffers and verify */ + for (i = 0; i < BUFFER_PROC_LIST_DEPTH ; i++) { + success = CheckOneBuffer((A_UINT16 *)checkList[i].pBuffer, checkList[i].length); + if (!success) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer : 0x%X, Length:%d failed verify \n", + (A_UINT32)checkList[i].pBuffer, checkList[i].length)); + break; + } + } + + return success; +} + + /* find the end marker for the last buffer we will be sending */ +static A_UINT16 GetEndMarker(void) +{ + A_UINT8 *pBuffer; + BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH]; + + /* fill up buffers with the normal counting pattern */ + InitBuffers(FILL_COUNTING); + + /* assemble the list we will be sending down */ + AssembleBufferList(checkList); + /* point to the last 2 bytes of the last buffer */ + pBuffer = &(checkList[BUFFER_PROC_LIST_DEPTH - 1].pBuffer[(checkList[BUFFER_PROC_LIST_DEPTH - 1].length) - 2]); + + /* the last count in the last buffer is the marker */ + return (A_UINT16)pBuffer[0] | ((A_UINT16)pBuffer[1] << 8); +} + +#define ATH_PRINT_OUT_ZONE ATH_DEBUG_ERR + +/* send the ordered buffers to the target */ +static A_STATUS SendBuffers(AR6K_DEVICE *pDev, int mbox) +{ + A_STATUS status = A_OK; + A_UINT32 request = HIF_WR_SYNC_BLOCK_INC; + BUFFER_PROC_LIST sendList[BUFFER_PROC_LIST_DEPTH]; + int i; + int totalBytes = 0; + int paddedLength; + int totalwPadding = 0; + + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sending buffers on mailbox : %d \n",mbox)); + + /* fill buffer with counting pattern */ + InitBuffers(FILL_COUNTING); + + /* assemble the order in which we send */ + AssembleBufferList(sendList); + + for (i = 0; i < BUFFER_PROC_LIST_DEPTH; i++) { + + /* we are doing block transfers, so we need to pad everything to a block size */ + paddedLength = (sendList[i].length + (g_BlockSizes[mbox] - 1)) & + (~(g_BlockSizes[mbox] - 1)); + + /* send each buffer synchronously */ + status = HIFReadWrite(pDev->HIFDevice, + g_MailboxAddrs[mbox], + sendList[i].pBuffer, + paddedLength, + request, + NULL); + if (status != A_OK) { + break; + } + totalBytes += sendList[i].length; + totalwPadding += paddedLength; + } + + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Sent %d bytes (%d padded bytes) to mailbox : %d \n",totalBytes,totalwPadding,mbox)); + + return status; +} + +/* poll the mailbox credit counter until we get a credit or timeout */ +static A_STATUS GetCredits(AR6K_DEVICE *pDev, int mbox, int *pCredits) +{ + A_STATUS status = A_OK; + int timeout = TEST_CREDITS_RECV_TIMEOUT; + A_UINT8 credits = 0; + A_UINT32 address; + + while (TRUE) { + + /* Read the counter register to get credits, this auto-decrements */ + address = COUNT_DEC_ADDRESS + (AR6K_MAILBOXES + mbox) * 4; + status = HIFReadWrite(pDev->HIFDevice, address, &credits, sizeof(credits), + HIF_RD_SYNC_BYTE_FIX, NULL); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + ("Unable to decrement the command credit count register (mbox=%d)\n",mbox)); + status = A_ERROR; + break; + } + + if (credits) { + break; + } + + timeout--; + + if (timeout <= 0) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + (" Timeout reading credit registers (mbox=%d, address:0x%X) \n",mbox,address)); + status = A_ERROR; + break; + } + + /* delay a little, target may not be ready */ + msleep(1000); + + } + + if (status == A_OK) { + *pCredits = credits; + } + + return status; +} + + +/* wait for the buffers to come back */ +static A_STATUS RecvBuffers(AR6K_DEVICE *pDev, int mbox) +{ + A_STATUS status = A_OK; + A_UINT32 request = HIF_RD_SYNC_BLOCK_INC; + BUFFER_PROC_LIST recvList[BUFFER_PROC_LIST_DEPTH]; + int curBuffer; + int credits; + int i; + int totalBytes = 0; + int paddedLength; + int totalwPadding = 0; + + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for buffers on mailbox : %d \n",mbox)); + + /* zero the buffers */ + InitBuffers(FILL_ZERO); + + /* assemble the order in which we should receive */ + AssembleBufferList(recvList); + + curBuffer = 0; + + while (curBuffer < BUFFER_PROC_LIST_DEPTH) { + + /* get number of buffers that have been completed, this blocks + * until we get at least 1 credit or it times out */ + status = GetCredits(pDev, mbox, &credits); + + if (status != A_OK) { + break; + } + + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got %d messages on mailbox : %d \n",credits, mbox)); + + /* get all the buffers that are sitting on the queue */ + for (i = 0; i < credits; i++) { + AR_DEBUG_ASSERT(curBuffer < BUFFER_PROC_LIST_DEPTH); + /* recv the current buffer synchronously, the buffers should come back in + * order... with padding applied by the target */ + paddedLength = (recvList[curBuffer].length + (g_BlockSizes[mbox] - 1)) & + (~(g_BlockSizes[mbox] - 1)); + + status = HIFReadWrite(pDev->HIFDevice, + g_MailboxAddrs[mbox], + recvList[curBuffer].pBuffer, + paddedLength, + request, + NULL); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to read %d bytes on mailbox:%d : address:0x%X \n", + recvList[curBuffer].length, mbox, g_MailboxAddrs[mbox])); + break; + } + + totalwPadding += paddedLength; + totalBytes += recvList[curBuffer].length; + curBuffer++; + } + + if (status != A_OK) { + break; + } + /* go back and get some more */ + credits = 0; + } + + if (totalBytes != TEST_BYTES) { + AR_DEBUG_ASSERT(FALSE); + } else { + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Got all buffers on mbox:%d total recv :%d (w/Padding : %d) \n", + mbox, totalBytes, totalwPadding)); + } + + return status; + + +} + +static A_STATUS DoOneMboxHWTest(AR6K_DEVICE *pDev, int mbox) +{ + A_STATUS status; + + do { + /* send out buffers */ + status = SendBuffers(pDev,mbox); + + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Sending buffers Failed : %d mbox:%d\n",status,mbox)); + break; + } + + /* go get them, this will block */ + status = RecvBuffers(pDev, mbox); + + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Recv buffers Failed : %d mbox:%d\n",status,mbox)); + break; + } + + /* check the returned data patterns */ + if (!CheckBuffers()) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer Verify Failed : mbox:%d\n",mbox)); + status = A_ERROR; + break; + } + + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" Send/Recv success! mailbox : %d \n",mbox)); + + } while (FALSE); + + return status; +} + +/* here is where the test starts */ +A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev) +{ + int i; + A_STATUS status; + int credits = 0; + A_UINT8 params[4]; + int numBufs; + int bufferSize; + A_UINT16 temp; + + + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest START - \n")); + + do { + /* get the addresses for all 4 mailboxes */ + status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_ADDR, + g_MailboxAddrs, sizeof(g_MailboxAddrs)); + + if (status != A_OK) { + AR_DEBUG_ASSERT(FALSE); + break; + } + + /* get the block sizes */ + status = HIFConfigureDevice(pDev->HIFDevice, HIF_DEVICE_GET_MBOX_BLOCK_SIZE, + g_BlockSizes, sizeof(g_BlockSizes)); + + if (status != A_OK) { + AR_DEBUG_ASSERT(FALSE); + break; + } + + /* note, the HIF layer usually reports mbox 0 to have a block size of + * 1, but our test wants to run in block-mode for all mailboxes, so we treat all mailboxes + * the same. */ + g_BlockSizes[0] = g_BlockSizes[1]; + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Block Size to use: %d \n",g_BlockSizes[0])); + + if (g_BlockSizes[1] > BUFFER_BLOCK_PAD) { + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("%d Block size is too large for buffer pad %d\n", + g_BlockSizes[1], BUFFER_BLOCK_PAD)); + break; + } + + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Waiting for target.... \n")); + + /* the target lets us know it is ready by giving us 1 credit on + * mailbox 0 */ + status = GetCredits(pDev, 0, &credits); + + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait for target ready \n")); + break; + } + + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Target is ready ...\n")); + + /* read the first 4 scratch registers */ + status = HIFReadWrite(pDev->HIFDevice, + SCRATCH_ADDRESS, + params, + 4, + HIF_RD_SYNC_BYTE_INC, + NULL); + + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to wait get parameters \n")); + break; + } + + numBufs = params[0]; + bufferSize = (int)(((A_UINT16)params[2] << 8) | (A_UINT16)params[1]); + + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, + ("Target parameters: bufs per mailbox:%d, buffer size:%d bytes (total space: %d, minimum required space (w/padding): %d) \n", + numBufs, bufferSize, (numBufs * bufferSize), TOTAL_BYTES)); + + if ((numBufs * bufferSize) < TOTAL_BYTES) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Not Enough buffer space to run test! need:%d, got:%d \n", + TOTAL_BYTES, (numBufs*bufferSize))); + status = A_ERROR; + break; + } + + temp = GetEndMarker(); + + status = HIFReadWrite(pDev->HIFDevice, + SCRATCH_ADDRESS + 4, + (A_UINT8 *)&temp, + 2, + HIF_WR_SYNC_BYTE_INC, + NULL); + + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write end marker \n")); + break; + } + + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("End Marker: 0x%X \n",temp)); + + temp = (A_UINT16)g_BlockSizes[1]; + /* convert to a mask */ + temp = temp - 1; + status = HIFReadWrite(pDev->HIFDevice, + SCRATCH_ADDRESS + 6, + (A_UINT8 *)&temp, + 2, + HIF_WR_SYNC_BYTE_INC, + NULL); + + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to write block mask \n")); + break; + } + + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, ("Set Block Mask: 0x%X \n",temp)); + + /* execute the test on each mailbox */ + for (i = 0; i < AR6K_MAILBOXES; i++) { + status = DoOneMboxHWTest(pDev, i); + if (status != A_OK) { + break; + } + } + + } while (FALSE); + + if (status == A_OK) { + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - SUCCESS! - \n")); + } else { + AR_DEBUG_PRINTF(ATH_PRINT_OUT_ZONE, (" DoMboxHWTest DONE - FAILED! - \n")); + } + /* don't let HTC_Start continue, the target is actually not running any HTC code */ + return A_ERROR; +} +#endif + + + diff --git a/drivers/ar6000/htc/ar6k.h b/drivers/ar6000/htc/ar6k.h new file mode 100644 index 00000000000..301ab34a37e --- /dev/null +++ b/drivers/ar6000/htc/ar6k.h @@ -0,0 +1,191 @@ +/* + * + * Copyright (c) 2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifndef AR6K_H_ +#define AR6K_H_ + +#define AR6K_MAILBOXES 4 + +/* HTC runs over mailbox 0 */ +#define HTC_MAILBOX 0 + +#define AR6K_TARGET_DEBUG_INTR_MASK 0x01 + +#define OTHER_INTS_ENABLED (INT_STATUS_ENABLE_ERROR_MASK | \ + INT_STATUS_ENABLE_CPU_MASK | \ + INT_STATUS_ENABLE_COUNTER_MASK) + +//#define MBOXHW_UNIT_TEST 1 + +#include "athstartpack.h" +typedef PREPACK struct _AR6K_IRQ_PROC_REGISTERS { + A_UINT8 host_int_status; + A_UINT8 cpu_int_status; + A_UINT8 error_int_status; + A_UINT8 counter_int_status; + A_UINT8 mbox_frame; + A_UINT8 rx_lookahead_valid; + A_UINT8 hole[2]; + A_UINT32 rx_lookahead[2]; +} POSTPACK AR6K_IRQ_PROC_REGISTERS; + +#define AR6K_IRQ_PROC_REGS_SIZE sizeof(AR6K_IRQ_PROC_REGISTERS) + + + +typedef PREPACK struct _AR6K_IRQ_ENABLE_REGISTERS { + A_UINT8 int_status_enable; + A_UINT8 cpu_int_status_enable; + A_UINT8 error_status_enable; + A_UINT8 counter_int_status_enable; +} POSTPACK AR6K_IRQ_ENABLE_REGISTERS; + +#include "athendpack.h" + +#define AR6K_IRQ_ENABLE_REGS_SIZE sizeof(AR6K_IRQ_ENABLE_REGISTERS) + +#define AR6K_REG_IO_BUFFER_SIZE 32 +#define AR6K_MAX_REG_IO_BUFFERS 8 + +/* buffers for ASYNC I/O */ +typedef struct AR6K_ASYNC_REG_IO_BUFFER { + HTC_PACKET HtcPacket; /* we use an HTC packet as a wrapper for our async register-based I/O */ + A_UINT8 Buffer[AR6K_REG_IO_BUFFER_SIZE]; +} AR6K_ASYNC_REG_IO_BUFFER; + +typedef struct _AR6K_DEVICE { + A_MUTEX_T Lock; + AR6K_IRQ_PROC_REGISTERS IrqProcRegisters; + AR6K_IRQ_ENABLE_REGISTERS IrqEnableRegisters; + void *HIFDevice; + A_UINT32 BlockSize; + A_UINT32 BlockMask; + A_UINT32 MailboxAddress; + HIF_PENDING_EVENTS_FUNC GetPendingEventsFunc; + void *HTCContext; + HTC_PACKET_QUEUE RegisterIOList; + AR6K_ASYNC_REG_IO_BUFFER RegIOBuffers[AR6K_MAX_REG_IO_BUFFERS]; + void (*TargetFailureCallback)(void *Context); + A_STATUS (*MessagePendingCallback)(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc); + HIF_DEVICE_IRQ_PROCESSING_MODE HifIRQProcessingMode; + HIF_MASK_UNMASK_RECV_EVENT HifMaskUmaskRecvEvent; +} AR6K_DEVICE; + +#define IS_DEV_IRQ_PROCESSING_ASYNC_ALLOWED(pDev) ((pDev)->HifIRQProcessingMode != HIF_DEVICE_IRQ_SYNC_ONLY) + +A_STATUS DevSetup(AR6K_DEVICE *pDev); +A_STATUS DevUnmaskInterrupts(AR6K_DEVICE *pDev); +A_STATUS DevMaskInterrupts(AR6K_DEVICE *pDev); +A_STATUS DevPollMboxMsgRecv(AR6K_DEVICE *pDev, + A_UINT32 *pLookAhead, + int TimeoutMS); +A_STATUS DevRWCompletionHandler(void *context, A_STATUS status); +A_STATUS DevDsrHandler(void *context); +A_STATUS DevCheckPendingRecvMsgsAsync(void *context); +void DevDumpRegisters(AR6K_IRQ_PROC_REGISTERS *pIrqProcRegs, + AR6K_IRQ_ENABLE_REGISTERS *pIrqEnableRegs); + +#define DEV_STOP_RECV_ASYNC TRUE +#define DEV_STOP_RECV_SYNC FALSE +#define DEV_ENABLE_RECV_ASYNC TRUE +#define DEV_ENABLE_RECV_SYNC FALSE +A_STATUS DevStopRecv(AR6K_DEVICE *pDev, A_BOOL ASyncMode); +A_STATUS DevEnableRecv(AR6K_DEVICE *pDev, A_BOOL ASyncMode); + +static INLINE A_STATUS DevSendPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket, A_UINT32 SendLength) { + A_UINT32 paddedLength; + A_BOOL sync = (pPacket->Completion == NULL) ? TRUE : FALSE; + A_STATUS status; + + /* adjust the length to be a multiple of block size if appropriate */ + paddedLength = (SendLength + (pDev->BlockMask)) & + (~(pDev->BlockMask)); +#if 0 // BufferLength may not be set in , fix this... + if (paddedLength > pPacket->BufferLength) { + AR_DEBUG_ASSERT(FALSE); + if (pPacket->Completion != NULL) { + COMPLETE_HTC_PACKET(pPacket,A_EINVAL); + } + return A_EINVAL; + } +#endif + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, + ("DevSendPacket, Padded Length: %d Mbox:0x%X (mode:%s)\n", + paddedLength, + pDev->MailboxAddress, + sync ? "SYNC" : "ASYNC")); + + status = HIFReadWrite(pDev->HIFDevice, + pDev->MailboxAddress, + pPacket->pBuffer, + paddedLength, /* the padded length */ + sync ? HIF_WR_SYNC_BLOCK_INC : HIF_WR_ASYNC_BLOCK_INC, + sync ? NULL : pPacket); /* pass the packet as the context to the HIF request */ + + if (sync) { + pPacket->Status = status; + } + + return status; +} + +static INLINE A_STATUS DevRecvPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket, A_UINT32 RecvLength) { + A_UINT32 paddedLength; + A_STATUS status; + A_BOOL sync = (pPacket->Completion == NULL) ? TRUE : FALSE; + + /* adjust the length to be a multiple of block size if appropriate */ + paddedLength = (RecvLength + (pDev->BlockMask)) & + (~(pDev->BlockMask)); + if (paddedLength > pPacket->BufferLength) { + AR_DEBUG_ASSERT(FALSE); + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + ("DevRecvPacket, Not enough space for padlen:%d recvlen:%d bufferlen:%d \n", + paddedLength,RecvLength,pPacket->BufferLength)); + if (pPacket->Completion != NULL) { + COMPLETE_HTC_PACKET(pPacket,A_EINVAL); + } + return A_EINVAL; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_RECV, + ("DevRecvPacket, Padded Length: %d Mbox:0x%X (mode:%s)\n", + paddedLength, + pDev->MailboxAddress, + sync ? "SYNC" : "ASYNC")); + + status = HIFReadWrite(pDev->HIFDevice, + pDev->MailboxAddress, + pPacket->pBuffer, + paddedLength, + sync ? HIF_RD_SYNC_BLOCK_INC : HIF_RD_ASYNC_BLOCK_INC, + sync ? NULL : pPacket); /* pass the packet as the context to the HIF request */ + + if (sync) { + pPacket->Status = status; + } + + return status; +} + +#ifdef MBOXHW_UNIT_TEST +A_STATUS DoMboxHWTest(AR6K_DEVICE *pDev); +#endif + +#endif /*AR6K_H_*/ diff --git a/drivers/ar6000/htc/ar6k_events.c b/drivers/ar6000/htc/ar6k_events.c new file mode 100644 index 00000000000..91b29af3711 --- /dev/null +++ b/drivers/ar6000/htc/ar6k_events.c @@ -0,0 +1,638 @@ +/* + * AR6K Driver layer event handling (i.e. interrupts, message polling) + * + * Copyright (c) 2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ +#include "a_config.h" +#include "athdefs.h" +#include "a_types.h" +#include "AR6Khwreg.h" +#include "a_osapi.h" +#include "a_debug.h" +#include "hif.h" +#include "htc_packet.h" +#include "ar6k.h" + +extern void AR6KFreeIOPacket(AR6K_DEVICE *pDev, HTC_PACKET *pPacket); +extern HTC_PACKET *AR6KAllocIOPacket(AR6K_DEVICE *pDev); + +static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev); + +#define DELAY_PER_INTERVAL_MS 10 /* 10 MS delay per polling interval */ + +/* completion routine for ALL HIF layer async I/O */ +A_STATUS DevRWCompletionHandler(void *context, A_STATUS status) +{ + HTC_PACKET *pPacket = (HTC_PACKET *)context; + + COMPLETE_HTC_PACKET(pPacket,status); + + return A_OK; +} + +/* mailbox recv message polling */ +A_STATUS DevPollMboxMsgRecv(AR6K_DEVICE *pDev, + A_UINT32 *pLookAhead, + int TimeoutMS) +{ + A_STATUS status = A_OK; + int timeout = TimeoutMS/DELAY_PER_INTERVAL_MS; + + AR_DEBUG_ASSERT(timeout > 0); + + AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+DevPollMboxMsgRecv \n")); + + while (TRUE) { + + if (pDev->GetPendingEventsFunc != NULL) + { + + HIF_PENDING_EVENTS_INFO events; + + /* the HIF layer uses a special mechanism to get events, do this + * synchronously */ + status = pDev->GetPendingEventsFunc(pDev->HIFDevice, + &events, + NULL); + if (A_FAILED(status)) + { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to get pending events \n")); + break; + } + + if (events.Events & HIF_RECV_MSG_AVAIL) + { + /* there is a message available, the lookahead should be valid now */ + *pLookAhead = events.LookAhead; + + break; + } + } + else + { + + /* this is the standard HIF way.... */ + /* load the register table */ + status = HIFReadWrite(pDev->HIFDevice, + HOST_INT_STATUS_ADDRESS, + (A_UINT8 *)&pDev->IrqProcRegisters, + AR6K_IRQ_PROC_REGS_SIZE, + HIF_RD_SYNC_BYTE_INC, + NULL); + + if (A_FAILED(status)) + { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to read register table \n")); + break; + } + + /* check for MBOX data and valid lookahead */ + if (pDev->IrqProcRegisters.host_int_status & (1 << HTC_MAILBOX)) + { + if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX)) + { + /* mailbox has a message and the look ahead is valid */ + *pLookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX]; + break; + } + } + + } + + timeout--; + + if (timeout <= 0) + { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" Timeout waiting for recv message \n")); + status = A_ERROR; + + /* check if the target asserted */ + if ( pDev->IrqProcRegisters.counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) { + /* target signaled an assert, process this pending interrupt + * this will call the target failure handler */ + DevServiceDebugInterrupt(pDev); + } + + break; + } + + /* delay a little */ + msleep(DELAY_PER_INTERVAL_MS); + AR_DEBUG_PRINTF(ATH_DEBUG_RECV,(" Retry Mbox Poll : %d \n",timeout)); + } + + AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-DevPollMboxMsgRecv \n")); + + return status; +} + +static A_STATUS DevServiceCPUInterrupt(AR6K_DEVICE *pDev) +{ + A_STATUS status; + A_UINT8 cpu_int_status; + A_UINT8 regBuffer[4]; + + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("CPU Interrupt\n")); + cpu_int_status = pDev->IrqProcRegisters.cpu_int_status & + pDev->IrqEnableRegisters.cpu_int_status_enable; + AR_DEBUG_ASSERT(cpu_int_status); + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, + ("Valid interrupt source(s) in CPU_INT_STATUS: 0x%x\n", + cpu_int_status)); + + /* Clear the interrupt */ + pDev->IrqProcRegisters.cpu_int_status &= ~cpu_int_status; /* W1C */ + + /* set up the register transfer buffer to hit the register 4 times , this is done + * to make the access 4-byte aligned to mitigate issues with host bus interconnects that + * restrict bus transfer lengths to be a multiple of 4-bytes */ + + /* set W1C value to clear the interrupt, this hits the register first */ + regBuffer[0] = cpu_int_status; + /* the remaining 4 values are set to zero which have no-effect */ + regBuffer[1] = 0; + regBuffer[2] = 0; + regBuffer[3] = 0; + + status = HIFReadWrite(pDev->HIFDevice, + CPU_INT_STATUS_ADDRESS, + regBuffer, + 4, + HIF_WR_SYNC_BYTE_FIX, + NULL); + + AR_DEBUG_ASSERT(status == A_OK); + return status; +} + + +static A_STATUS DevServiceErrorInterrupt(AR6K_DEVICE *pDev) +{ + A_STATUS status; + A_UINT8 error_int_status; + A_UINT8 regBuffer[4]; + + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error Interrupt\n")); + error_int_status = pDev->IrqProcRegisters.error_int_status & 0x0F; + AR_DEBUG_ASSERT(error_int_status); + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, + ("Valid interrupt source(s) in ERROR_INT_STATUS: 0x%x\n", + error_int_status)); + + if (ERROR_INT_STATUS_WAKEUP_GET(error_int_status)) { + /* Wakeup */ + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Error : Wakeup\n")); + } + + if (ERROR_INT_STATUS_RX_UNDERFLOW_GET(error_int_status)) { + /* Rx Underflow */ + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Rx Underflow\n")); + } + + if (ERROR_INT_STATUS_TX_OVERFLOW_GET(error_int_status)) { + /* Tx Overflow */ + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Error : Tx Overflow\n")); + } + + /* Clear the interrupt */ + pDev->IrqProcRegisters.error_int_status &= ~error_int_status; /* W1C */ + + /* set up the register transfer buffer to hit the register 4 times , this is done + * to make the access 4-byte aligned to mitigate issues with host bus interconnects that + * restrict bus transfer lengths to be a multiple of 4-bytes */ + + /* set W1C value to clear the interrupt, this hits the register first */ + regBuffer[0] = error_int_status; + /* the remaining 4 values are set to zero which have no-effect */ + regBuffer[1] = 0; + regBuffer[2] = 0; + regBuffer[3] = 0; + + status = HIFReadWrite(pDev->HIFDevice, + ERROR_INT_STATUS_ADDRESS, + regBuffer, + 4, + HIF_WR_SYNC_BYTE_FIX, + NULL); + + AR_DEBUG_ASSERT(status == A_OK); + return status; +} + +static A_STATUS DevServiceDebugInterrupt(AR6K_DEVICE *pDev) +{ + A_UINT32 dummy; + A_STATUS status; + + /* Send a target failure event to the application */ + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Target debug interrupt\n")); + + if (pDev->TargetFailureCallback != NULL) { + pDev->TargetFailureCallback(pDev->HTCContext); + } + + /* clear the interrupt , the debug error interrupt is + * counter 0 */ + /* read counter to clear interrupt */ + status = HIFReadWrite(pDev->HIFDevice, + COUNT_DEC_ADDRESS, + (A_UINT8 *)&dummy, + 4, + HIF_RD_SYNC_BYTE_INC, + NULL); + + AR_DEBUG_ASSERT(status == A_OK); + return status; +} + +static A_STATUS DevServiceCounterInterrupt(AR6K_DEVICE *pDev) +{ + A_UINT8 counter_int_status; + + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, ("Counter Interrupt\n")); + + counter_int_status = pDev->IrqProcRegisters.counter_int_status & + pDev->IrqEnableRegisters.counter_int_status_enable; + + AR_DEBUG_ASSERT(counter_int_status); + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, + ("Valid interrupt source(s) in COUNTER_INT_STATUS: 0x%x\n", + counter_int_status)); + + /* Check if the debug interrupt is pending */ + if (counter_int_status & AR6K_TARGET_DEBUG_INTR_MASK) { + return DevServiceDebugInterrupt(pDev); + } + + return A_OK; +} + +/* callback when our fetch to get interrupt status registers completes */ +static void DevGetEventAsyncHandler(void *Context, HTC_PACKET *pPacket) +{ + AR6K_DEVICE *pDev = (AR6K_DEVICE *)Context; + A_UINT32 lookAhead = 0; + A_BOOL otherInts = FALSE; + + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevGetEventAsyncHandler: (dev: 0x%X)\n", (A_UINT32)pDev)); + + do { + + if (A_FAILED(pPacket->Status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + (" GetEvents I/O request failed, status:%d \n", pPacket->Status)); + /* bail out, don't unmask HIF interrupt */ + break; + } + + if (pDev->GetPendingEventsFunc != NULL) { + /* the HIF layer collected the information for us */ + HIF_PENDING_EVENTS_INFO *pEvents = (HIF_PENDING_EVENTS_INFO *)pPacket->pBuffer; + if (pEvents->Events & HIF_RECV_MSG_AVAIL) { + lookAhead = pEvents->LookAhead; + if (0 == lookAhead) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler1, lookAhead is zero! \n")); + } + } + if (pEvents->Events & HIF_OTHER_EVENTS) { + otherInts = TRUE; + } + } else { + /* standard interrupt table handling.... */ + AR6K_IRQ_PROC_REGISTERS *pReg = (AR6K_IRQ_PROC_REGISTERS *)pPacket->pBuffer; + A_UINT8 host_int_status; + + host_int_status = pReg->host_int_status & pDev->IrqEnableRegisters.int_status_enable; + + if (host_int_status & (1 << HTC_MAILBOX)) { + host_int_status &= ~(1 << HTC_MAILBOX); + if (pReg->rx_lookahead_valid & (1 << HTC_MAILBOX)) { + /* mailbox has a message and the look ahead is valid */ + lookAhead = pReg->rx_lookahead[HTC_MAILBOX]; + if (0 == lookAhead) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" DevGetEventAsyncHandler2, lookAhead is zero! \n")); + } + } + } + + if (host_int_status) { + /* there are other interrupts to handle */ + otherInts = TRUE; + } + } + + if (otherInts || (lookAhead == 0)) { + /* if there are other interrupts to process, we cannot do this in the async handler so + * ack the interrupt which will cause our sync handler to run again + * if however there are no more messages, we can now ack the interrupt */ + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, + (" Acking interrupt from DevGetEventAsyncHandler (otherints:%d, lookahead:0x%X)\n", + otherInts, lookAhead)); + HIFAckInterrupt(pDev->HIFDevice); + } else { + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, + (" DevGetEventAsyncHandler : detected another message, lookahead :0x%X \n", + lookAhead)); + /* lookahead is non-zero and there are no other interrupts to service, + * go get the next message */ + pDev->MessagePendingCallback(pDev->HTCContext, lookAhead, NULL); + } + + } while (FALSE); + + /* free this IO packet */ + AR6KFreeIOPacket(pDev,pPacket); + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevGetEventAsyncHandler \n")); +} + +/* called by the HTC layer when it wants us to check if the device has any more pending + * recv messages, this starts off a series of async requests to read interrupt registers */ +A_STATUS DevCheckPendingRecvMsgsAsync(void *context) +{ + AR6K_DEVICE *pDev = (AR6K_DEVICE *)context; + A_STATUS status = A_OK; + HTC_PACKET *pIOPacket; + + /* this is called in an ASYNC only context, we may NOT block, sleep or call any apis that can + * cause us to switch contexts */ + + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevCheckPendingRecvMsgsAsync: (dev: 0x%X)\n", (A_UINT32)pDev)); + + do { + + if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) { + /* break the async processing chain right here, no need to continue. + * The DevDsrHandler() will handle things in a loop when things are driven + * synchronously */ + break; + } + /* first allocate one of our HTC packets we created for async I/O + * we reuse HTC packet definitions so that we can use the completion mechanism + * in DevRWCompletionHandler() */ + pIOPacket = AR6KAllocIOPacket(pDev); + + if (NULL == pIOPacket) { + /* there should be only 1 asynchronous request out at a time to read these registers + * so this should actually never happen */ + status = A_NO_MEMORY; + AR_DEBUG_ASSERT(FALSE); + break; + } + + /* stick in our completion routine when the I/O operation completes */ + pIOPacket->Completion = DevGetEventAsyncHandler; + pIOPacket->pContext = pDev; + + if (pDev->GetPendingEventsFunc) { + /* HIF layer has it's own mechanism, pass the IO to it.. */ + status = pDev->GetPendingEventsFunc(pDev->HIFDevice, + (HIF_PENDING_EVENTS_INFO *)pIOPacket->pBuffer, + pIOPacket); + + } else { + /* standard way, read the interrupt register table asynchronously again */ + status = HIFReadWrite(pDev->HIFDevice, + HOST_INT_STATUS_ADDRESS, + pIOPacket->pBuffer, + AR6K_IRQ_PROC_REGS_SIZE, + HIF_RD_ASYNC_BYTE_INC, + pIOPacket); + } + + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Async IO issued to get interrupt status...\n")); + } while (FALSE); + + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevCheckPendingRecvMsgsAsync \n")); + + return status; +} + +/* process pending interrupts synchronously */ +static A_STATUS ProcessPendingIRQs(AR6K_DEVICE *pDev, A_BOOL *pDone, A_BOOL *pASyncProcessing) +{ + A_STATUS status = A_OK; + A_UINT8 host_int_status = 0; + A_UINT32 lookAhead = 0; + + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+ProcessPendingIRQs: (dev: 0x%X)\n", (A_UINT32)pDev)); + + /*** NOTE: the HIF implementation guarantees that the context of this call allows + * us to perform SYNCHRONOUS I/O, that is we can block, sleep or call any API that + * can block or switch thread/task ontexts. + * This is a fully schedulable context. + * */ + do { + + if (pDev->GetPendingEventsFunc != NULL) { + HIF_PENDING_EVENTS_INFO events; + + /* the HIF layer uses a special mechanism to get events + * get this synchronously */ + status = pDev->GetPendingEventsFunc(pDev->HIFDevice, + &events, + NULL); + + if (A_FAILED(status)) { + break; + } + + if (events.Events & HIF_RECV_MSG_AVAIL) { + lookAhead = events.LookAhead; + if (0 == lookAhead) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs1 lookAhead is zero! \n")); + } + } + + if (!(events.Events & HIF_OTHER_EVENTS) || + !(pDev->IrqEnableRegisters.int_status_enable & OTHER_INTS_ENABLED)) { + /* no need to read the register table, no other interesting interrupts. + * Some interfaces (like SPI) can shadow interrupt sources without + * requiring the host to do a full table read */ + break; + } + + /* otherwise fall through and read the register table */ + } + + /* + * Read the first 28 bytes of the HTC register table. This will yield us + * the value of different int status registers and the lookahead + * registers. + * length = sizeof(int_status) + sizeof(cpu_int_status) + + * sizeof(error_int_status) + sizeof(counter_int_status) + + * sizeof(mbox_frame) + sizeof(rx_lookahead_valid) + + * sizeof(hole) + sizeof(rx_lookahead) + + * sizeof(int_status_enable) + sizeof(cpu_int_status_enable) + + * sizeof(error_status_enable) + + * sizeof(counter_int_status_enable); + * + */ + status = HIFReadWrite(pDev->HIFDevice, + HOST_INT_STATUS_ADDRESS, + (A_UINT8 *)&pDev->IrqProcRegisters, + AR6K_IRQ_PROC_REGS_SIZE, + HIF_RD_SYNC_BYTE_INC, + NULL); + + if (A_FAILED(status)) { + break; + } + + if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_IRQ)) { + DevDumpRegisters(&pDev->IrqProcRegisters, + &pDev->IrqEnableRegisters); + } + + /* Update only those registers that are enabled */ + host_int_status = pDev->IrqProcRegisters.host_int_status & + pDev->IrqEnableRegisters.int_status_enable; + + if (NULL == pDev->GetPendingEventsFunc) { + /* only look at mailbox status if the HIF layer did not provide this function, + * on some HIF interfaces reading the RX lookahead is not valid to do */ + if (host_int_status & (1 << HTC_MAILBOX)) { + /* mask out pending mailbox value, we use "lookAhead" as the real flag for + * mailbox processing below */ + host_int_status &= ~(1 << HTC_MAILBOX); + if (pDev->IrqProcRegisters.rx_lookahead_valid & (1 << HTC_MAILBOX)) { + /* mailbox has a message and the look ahead is valid */ + lookAhead = pDev->IrqProcRegisters.rx_lookahead[HTC_MAILBOX]; + if (0 == lookAhead) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" ProcessPendingIRQs2, lookAhead is zero! \n")); + } + } + } + } else { + /* not valid to check if the HIF has another mechanism for reading mailbox pending status*/ + host_int_status &= ~(1 << HTC_MAILBOX); + } + + } while (FALSE); + + + do { + + /* did the interrupt status fetches succeed? */ + if (A_FAILED(status)) { + break; + } + + if ((0 == host_int_status) && (0 == lookAhead)) { + /* nothing to process, the caller can use this to break out of a loop */ + *pDone = TRUE; + break; + } + + if (lookAhead != 0) { + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("Pending mailbox message, LookAhead: 0x%X\n",lookAhead)); + /* Mailbox Interrupt, the HTC layer may issue async requests to empty the + * mailbox... + * When emptying the recv mailbox we use the async handler above called from the + * completion routine of the callers read request. This can improve performance + * by reducing context switching when we rapidly pull packets */ + status = pDev->MessagePendingCallback(pDev->HTCContext, lookAhead, pASyncProcessing); + if (A_FAILED(status)) { + break; + } + } + + /* now handle the rest of them */ + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ, + (" Valid interrupt source(s) for OTHER interrupts: 0x%x\n", + host_int_status)); + + if (HOST_INT_STATUS_CPU_GET(host_int_status)) { + /* CPU Interrupt */ + status = DevServiceCPUInterrupt(pDev); + if (A_FAILED(status)){ + break; + } + } + + if (HOST_INT_STATUS_ERROR_GET(host_int_status)) { + /* Error Interrupt */ + status = DevServiceErrorInterrupt(pDev); + if (A_FAILED(status)){ + break; + } + } + + if (HOST_INT_STATUS_COUNTER_GET(host_int_status)) { + /* Counter Interrupt */ + status = DevServiceCounterInterrupt(pDev); + if (A_FAILED(status)){ + break; + } + } + + } while (FALSE); + + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-ProcessPendingIRQs: (done:%d, async:%d) status=%d \n", + *pDone, *pASyncProcessing, status)); + + return status; +} + + +/* Synchronousinterrupt handler, this handler kicks off all interrupt processing.*/ +A_STATUS DevDsrHandler(void *context) +{ + AR6K_DEVICE *pDev = (AR6K_DEVICE *)context; + A_STATUS status = A_OK; + A_BOOL done = FALSE; + A_BOOL asyncProc = FALSE; + + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("+DevDsrHandler: (dev: 0x%X)\n", (A_UINT32)pDev)); + + + while (!done) { + status = ProcessPendingIRQs(pDev, &done, &asyncProc); + if (A_FAILED(status)) { + break; + } + + if (HIF_DEVICE_IRQ_SYNC_ONLY == pDev->HifIRQProcessingMode) { + /* the HIF layer does not allow async IRQ processing, override the asyncProc flag */ + asyncProc = FALSE; + /* this will cause us to re-enter ProcessPendingIRQ() and re-read interrupt status registers. + * this has a nice side effect of blocking us until all async read requests are completed. + * This behavior is required on some HIF implementations that do not allow ASYNC + * processing in interrupt handlers (like Windows CE) */ + } + + if (asyncProc) { + /* the function performed some async I/O for performance, we + need to exit the ISR immediately, the check below will prevent the interrupt from being + Ack'd while we handle it asynchronously */ + break; + } + + } + + if (A_SUCCESS(status) && !asyncProc) { + /* Ack the interrupt only if : + * 1. we did not get any errors in processing interrupts + * 2. there are no outstanding async processing requests */ + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,(" Acking interrupt from DevDsrHandler \n")); + HIFAckInterrupt(pDev->HIFDevice); + } + + AR_DEBUG_PRINTF(ATH_DEBUG_IRQ,("-DevDsrHandler \n")); + return A_OK; +} + + diff --git a/drivers/ar6000/htc/htc.c b/drivers/ar6000/htc/htc.c new file mode 100644 index 00000000000..d52ed944e0d --- /dev/null +++ b/drivers/ar6000/htc/htc.c @@ -0,0 +1,508 @@ +/* + * + * Copyright (c) 2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "htc_internal.h" + + +static HTC_INIT_INFO HTCInitInfo = {NULL,NULL,NULL}; +static A_BOOL HTCInitialized = FALSE; + +static A_STATUS HTCTargetInsertedHandler(void *hif_handle); +static A_STATUS HTCTargetRemovedHandler(void *handle, A_STATUS status); +static void HTCReportFailure(void *Context); + +/* Initializes the HTC layer */ +A_STATUS HTCInit(HTC_INIT_INFO *pInitInfo) +{ + HTC_CALLBACKS htcCallbacks; + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Enter\n")); + if (HTCInitialized) { + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Exit\n")); + return A_OK; + } + + A_MEMCPY(&HTCInitInfo,pInitInfo,sizeof(HTC_INIT_INFO)); + + A_MEMZERO(&htcCallbacks, sizeof(HTC_CALLBACKS)); + + /* setup HIF layer callbacks */ + htcCallbacks.deviceInsertedHandler = HTCTargetInsertedHandler; + htcCallbacks.deviceRemovedHandler = HTCTargetRemovedHandler; + /* the device layer handles these */ + htcCallbacks.rwCompletionHandler = DevRWCompletionHandler; + htcCallbacks.dsrHandler = DevDsrHandler; + HIFInit(&htcCallbacks); + HTCInitialized = TRUE; + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCInit: Exit\n")); + return A_OK; +} + +void HTCFreeControlBuffer(HTC_TARGET *target, HTC_PACKET *pPacket, HTC_PACKET_QUEUE *pList) +{ + LOCK_HTC(target); + HTC_PACKET_ENQUEUE(pList,pPacket); + UNLOCK_HTC(target); +} + +HTC_PACKET *HTCAllocControlBuffer(HTC_TARGET *target, HTC_PACKET_QUEUE *pList) +{ + HTC_PACKET *pPacket; + + LOCK_HTC(target); + pPacket = HTC_PACKET_DEQUEUE(pList); + UNLOCK_HTC(target); + + return pPacket; +} + +/* cleanup the HTC instance */ +static void HTCCleanup(HTC_TARGET *target) +{ + if (A_IS_MUTEX_VALID(&target->HTCLock)) { + A_MUTEX_DELETE(&target->HTCLock); + } + + if (A_IS_MUTEX_VALID(&target->HTCRxLock)) { + A_MUTEX_DELETE(&target->HTCRxLock); + } + + if (A_IS_MUTEX_VALID(&target->HTCTxLock)) { + A_MUTEX_DELETE(&target->HTCTxLock); + } + /* free our instance */ + A_FREE(target); +} + +/* registered target arrival callback from the HIF layer */ +static A_STATUS HTCTargetInsertedHandler(void *hif_handle) +{ + HTC_TARGET *target = NULL; + A_STATUS status; + int i; + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("htcTargetInserted - Enter\n")); + + do { + + /* allocate target memory */ + if ((target = (HTC_TARGET *)A_MALLOC(sizeof(HTC_TARGET))) == NULL) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unable to allocate memory\n")); + status = A_ERROR; + break; + } + + A_MEMZERO(target, sizeof(HTC_TARGET)); + A_MUTEX_INIT(&target->HTCLock); + A_MUTEX_INIT(&target->HTCRxLock); + A_MUTEX_INIT(&target->HTCTxLock); + INIT_HTC_PACKET_QUEUE(&target->ControlBufferTXFreeList); + INIT_HTC_PACKET_QUEUE(&target->ControlBufferRXFreeList); + + /* give device layer the hif device handle */ + target->Device.HIFDevice = hif_handle; + /* give the device layer our context (for event processing) + * the device layer will register it's own context with HIF + * so we need to set this so we can fetch it in the target remove handler */ + target->Device.HTCContext = target; + /* set device layer target failure callback */ + target->Device.TargetFailureCallback = HTCReportFailure; + /* set device layer recv message pending callback */ + target->Device.MessagePendingCallback = HTCRecvMessagePendingHandler; + target->EpWaitingForBuffers = ENDPOINT_MAX; + + /* setup device layer */ + status = DevSetup(&target->Device); + + if (A_FAILED(status)) { + break; + } + + /* carve up buffers/packets for control messages */ + for (i = 0; i < NUM_CONTROL_RX_BUFFERS; i++) { + HTC_PACKET *pControlPacket; + pControlPacket = &target->HTCControlBuffers[i].HtcPacket; + SET_HTC_PACKET_INFO_RX_REFILL(pControlPacket, + target, + target->HTCControlBuffers[i].Buffer, + HTC_CONTROL_BUFFER_SIZE, + ENDPOINT_0); + HTC_FREE_CONTROL_RX(target,pControlPacket); + } + + for (;i < NUM_CONTROL_BUFFERS;i++) { + HTC_PACKET *pControlPacket; + pControlPacket = &target->HTCControlBuffers[i].HtcPacket; + INIT_HTC_PACKET_INFO(pControlPacket, + target->HTCControlBuffers[i].Buffer, + HTC_CONTROL_BUFFER_SIZE); + HTC_FREE_CONTROL_TX(target,pControlPacket); + } + + } while (FALSE); + + if (A_SUCCESS(status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" calling AddInstance callback \n")); + /* announce ourselves */ + HTCInitInfo.AddInstance((HTC_HANDLE)target); + } else { + if (target != NULL) { + HTCCleanup(target); + } + } + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("htcTargetInserted - Exit\n")); + + return status; +} + +/* registered removal callback from the HIF layer */ +static A_STATUS HTCTargetRemovedHandler(void *handle, A_STATUS status) +{ + HTC_TARGET *target; + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCTargetRemovedHandler handle:0x%X \n",(A_UINT32)handle)); + + if (NULL == handle) { + /* this could be NULL in the event that target initialization failed */ + return A_OK; + } + + target = ((AR6K_DEVICE *)handle)->HTCContext; + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" removing target:0x%X instance:0x%X ... \n", + (A_UINT32)target, (A_UINT32)target->pInstanceContext)); + + if (target->pInstanceContext != NULL) { + /* let upper layer know, it needs to call HTCStop() */ + HTCInitInfo.DeleteInstance(target->pInstanceContext); + } + + HIFShutDownDevice(target->Device.HIFDevice); + + HTCCleanup(target); + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCTargetRemovedHandler \n")); + return A_OK; +} + +/* get the low level HIF device for the caller , the caller may wish to do low level + * HIF requests */ +void *HTCGetHifDevice(HTC_HANDLE HTCHandle) +{ + HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); + return target->Device.HIFDevice; +} + +/* set the instance block for this HTC handle, so that on removal, the blob can be + * returned to the caller */ +void HTCSetInstance(HTC_HANDLE HTCHandle, void *Instance) +{ + HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); + + target->pInstanceContext = Instance; +} + +/* wait for the target to arrive (sends HTC Ready message) + * this operation is fully synchronous and the message is polled for */ +A_STATUS HTCWaitTarget(HTC_HANDLE HTCHandle) +{ + HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); + A_STATUS status; + HTC_PACKET *pPacket = NULL; + HTC_READY_MSG *pRdyMsg; + HTC_SERVICE_CONNECT_REQ connect; + HTC_SERVICE_CONNECT_RESP resp; + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCWaitTarget - Enter (target:0x%X) \n", (A_UINT32)target)); + + do { + +#ifdef MBOXHW_UNIT_TEST + + status = DoMboxHWTest(&target->Device); + + if (status != A_OK) { + break; + } + +#endif + + /* we should be getting 1 control message that the target is ready */ + status = HTCWaitforControlMessage(target, &pPacket); + + if (A_FAILED(status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" Target Not Available!!\n")); + break; + } + + /* we controlled the buffer creation so it has to be properly aligned */ + pRdyMsg = (HTC_READY_MSG *)pPacket->pBuffer; + + if ((pRdyMsg->MessageID != HTC_MSG_READY_ID) || + (pPacket->ActualLength < sizeof(HTC_READY_MSG))) { + /* this message is not valid */ + AR_DEBUG_ASSERT(FALSE); + status = A_EPROTO; + break; + } + + if (pRdyMsg->CreditCount == 0 || pRdyMsg->CreditSize == 0) { + /* this message is not valid */ + AR_DEBUG_ASSERT(FALSE); + status = A_EPROTO; + break; + } + + target->TargetCredits = pRdyMsg->CreditCount; + target->TargetCreditSize = pRdyMsg->CreditSize; + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" Target Ready: credits: %d credit size: %d\n", + target->TargetCredits, target->TargetCreditSize)); + + /* setup our pseudo HTC control endpoint connection */ + A_MEMZERO(&connect,sizeof(connect)); + A_MEMZERO(&resp,sizeof(resp)); + connect.EpCallbacks.pContext = target; + connect.EpCallbacks.EpTxComplete = HTCControlTxComplete; + connect.EpCallbacks.EpRecv = HTCControlRecv; + connect.EpCallbacks.EpRecvRefill = NULL; /* not needed */ + connect.EpCallbacks.EpSendFull = NULL; /* not needed */ + connect.EpCallbacks.EpSendAvail = NULL; /* not needed */ + connect.MaxSendQueueDepth = NUM_CONTROL_BUFFERS; + connect.ServiceID = HTC_CTRL_RSVD_SVC; + + /* connect fake service */ + status = HTCConnectService((HTC_HANDLE)target, + &connect, + &resp); + + if (!A_FAILED(status)) { + break; + } + + } while (FALSE); + + if (pPacket != NULL) { + HTC_FREE_CONTROL_RX(target,pPacket); + } + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCWaitTarget - Exit\n")); + + return status; +} + + + +/* Start HTC, enable interrupts and let the target know host has finished setup */ +A_STATUS HTCStart(HTC_HANDLE HTCHandle) +{ + HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); + HTC_PACKET *pPacket; + A_STATUS status; + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCStart Enter\n")); + + /* now that we are starting, push control receive buffers into the + * HTC control endpoint */ + + while (1) { + pPacket = HTC_ALLOC_CONTROL_RX(target); + if (NULL == pPacket) { + break; + } + HTCAddReceivePkt((HTC_HANDLE)target,pPacket); + } + + do { + + AR_DEBUG_ASSERT(target->InitCredits != NULL); + AR_DEBUG_ASSERT(target->EpCreditDistributionListHead != NULL); + AR_DEBUG_ASSERT(target->EpCreditDistributionListHead->pNext != NULL); + + /* call init credits callback to do the distribution , + * NOTE: the first entry in the distribution list is ENDPOINT_0, so + * we pass the start of the list after this one. */ + target->InitCredits(target->pCredDistContext, + target->EpCreditDistributionListHead->pNext, + target->TargetCredits); + + if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_TRC)) { + DumpCreditDistStates(target); + } + + /* the caller is done connecting to services, so we can indicate to the + * target that the setup phase is complete */ + status = HTCSendSetupComplete(target); + + if (A_FAILED(status)) { + break; + } + + /* unmask interrupts */ + status = DevUnmaskInterrupts(&target->Device); + + if (A_FAILED(status)) { + HTCStop(target); + } + + } while (FALSE); + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("HTCStart Exit\n")); + return status; +} + + +/* stop HTC communications, i.e. stop interrupt reception, and flush all queued buffers */ +void HTCStop(HTC_HANDLE HTCHandle) +{ + HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCStop \n")); + + /* mark that we are shutting down .. */ + target->HTCStateFlags |= HTC_STATE_STOPPING; + + /* Masking interrupts is a synchronous operation, when this function returns + * all pending HIF I/O has completed, we can safely flush the queues */ + DevMaskInterrupts(&target->Device); + + /* flush all send packets */ + HTCFlushSendPkts(target); + /* flush all recv buffers */ + HTCFlushRecvBuffers(target); + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCStop \n")); +} + +/* undo what was done in HTCInit() */ +void HTCShutDown(void) +{ + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCShutDown: \n")); + HTCInitialized = FALSE; + /* undo HTCInit */ + HIFShutDownDevice(NULL); + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCShutDown: \n")); +} + +void HTCDumpCreditStates(HTC_HANDLE HTCHandle) +{ + HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); + + LOCK_HTC_TX(target); + + DumpCreditDistStates(target); + + UNLOCK_HTC_TX(target); +} + +/* report a target failure from the device, this is a callback from the device layer + * which uses a mechanism to report errors from the target (i.e. special interrupts) */ +static void HTCReportFailure(void *Context) +{ + HTC_TARGET *target = (HTC_TARGET *)Context; + + target->TargetFailure = TRUE; + + if ((target->pInstanceContext != NULL) && (HTCInitInfo.TargetFailure != NULL)) { + /* let upper layer know, it needs to call HTCStop() */ + HTCInitInfo.TargetFailure(target->pInstanceContext, A_ERROR); + } +} + +void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription) +{ + A_CHAR stream[60]; + A_UINT32 i; + A_UINT16 offset, count; + + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("<---------Dumping %d Bytes : %s ------>\n", length, pDescription)); + + count = 0; + offset = 0; + for(i = 0; i < length; i++) { + sprintf(stream + offset, "%2.2X ", buffer[i]); + count ++; + offset += 3; + + if(count == 16) { + count = 0; + offset = 0; + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("[H]: %s\n", stream)); + A_MEMZERO(stream, 60); + } + } + + if(offset != 0) { + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("[H]: %s\n", stream)); + } + + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("<------------------------------------------------->\n")); +} + +A_BOOL HTCGetEndpointStatistics(HTC_HANDLE HTCHandle, + HTC_ENDPOINT_ID Endpoint, + HTC_ENDPOINT_STAT_ACTION Action, + HTC_ENDPOINT_STATS *pStats) +{ + +#ifdef HTC_EP_STAT_PROFILING + HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); + A_BOOL clearStats = FALSE; + A_BOOL sample = FALSE; + + switch (Action) { + case HTC_EP_STAT_SAMPLE : + sample = TRUE; + break; + case HTC_EP_STAT_SAMPLE_AND_CLEAR : + sample = TRUE; + clearStats = TRUE; + break; + case HTC_EP_STAT_CLEAR : + clearStats = TRUE; + break; + default: + break; + } + + A_ASSERT(Endpoint < ENDPOINT_MAX); + + /* lock out TX and RX while we sample and/or clear */ + LOCK_HTC_TX(target); + LOCK_HTC_RX(target); + + if (sample) { + A_ASSERT(pStats != NULL); + /* return the stats to the caller */ + A_MEMCPY(pStats, &target->EndPoint[Endpoint].EndPointStats, sizeof(HTC_ENDPOINT_STATS)); + } + + if (clearStats) { + /* reset stats */ + A_MEMZERO(&target->EndPoint[Endpoint].EndPointStats, sizeof(HTC_ENDPOINT_STATS)); + } + + UNLOCK_HTC_RX(target); + UNLOCK_HTC_TX(target); + + return TRUE; +#else + return FALSE; +#endif +} diff --git a/drivers/ar6000/htc/htc_debug.h b/drivers/ar6000/htc/htc_debug.h new file mode 100644 index 00000000000..08080be51a2 --- /dev/null +++ b/drivers/ar6000/htc/htc_debug.h @@ -0,0 +1,65 @@ +#ifndef HTC_DEBUG_H_ +#define HTC_DEBUG_H_ +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +/* ------- Debug related stuff ------- */ +enum { + ATH_DEBUG_SEND = 0x0001, + ATH_DEBUG_RECV = 0x0002, + ATH_DEBUG_SYNC = 0x0004, + ATH_DEBUG_DUMP = 0x0008, + ATH_DEBUG_IRQ = 0x0010, + ATH_DEBUG_TRC = 0x0020, + ATH_DEBUG_WARN = 0x0040, + ATH_DEBUG_ERR = 0x0080, + ATH_DEBUG_ANY = 0xFFFF, +}; + +#ifdef DEBUG + +// TODO FIX usage of A_PRINTF! +#define AR_DEBUG_LVL_CHECK(lvl) (debughtc & (lvl)) +#define AR_DEBUG_PRINTBUF(buffer, length, desc) do { \ + if (debughtc & ATH_DEBUG_DUMP) { \ + DebugDumpBytes(buffer, length,desc); \ + } \ +} while(0) +#define PRINTX_ARG(arg...) arg +#define AR_DEBUG_PRINTF(flags, args) do { \ + if (debughtc & (flags)) { \ + A_PRINTF(KERN_ALERT PRINTX_ARG args); \ + } \ +} while (0) +#define AR_DEBUG_ASSERT(test) do { \ + if (!(test)) { \ + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Debug Assert Caught, File %s, Line: %d, Test:%s \n",__FILE__, __LINE__,#test)); \ + } \ +} while(0) +extern int debughtc; +#else +#define AR_DEBUG_PRINTF(flags, args) +#define AR_DEBUG_PRINTBUF(buffer, length, desc) +#define AR_DEBUG_ASSERT(test) +#define AR_DEBUG_LVL_CHECK(lvl) 0 +#endif + +void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription); + +#endif /*HTC_DEBUG_H_*/ diff --git a/drivers/ar6000/htc/htc_internal.h b/drivers/ar6000/htc/htc_internal.h new file mode 100644 index 00000000000..ebb8ac16ed1 --- /dev/null +++ b/drivers/ar6000/htc/htc_internal.h @@ -0,0 +1,168 @@ +/* + * + * Copyright (c) 2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifndef _HTC_INTERNAL_H_ +#define _HTC_INTERNAL_H_ + +/* for debugging, uncomment this to capture the last frame header, on frame header + * processing errors, the last frame header is dump for comparison */ +//#define HTC_CAPTURE_LAST_FRAME + +//#define HTC_EP_STAT_PROFILING + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Header files */ +#include "a_config.h" +#include "athdefs.h" +#include "a_types.h" +#include "a_osapi.h" +#include "a_debug.h" +#include "htc.h" +#include "htc_api.h" +#include "bmi_msg.h" +#include "hif.h" +#include "ar6k.h" + +/* HTC operational parameters */ +#define HTC_TARGET_RESPONSE_TIMEOUT 2000 /* in ms */ +#define HTC_TARGET_DEBUG_INTR_MASK 0x01 +#define HTC_TARGET_CREDIT_INTR_MASK 0xF0 + +typedef struct _HTC_ENDPOINT { + HTC_SERVICE_ID ServiceID; /* service ID this endpoint is bound to + non-zero value means this endpoint is in use */ + HTC_PACKET_QUEUE TxQueue; /* HTC frame buffer TX queue */ + HTC_PACKET_QUEUE RxBuffers; /* HTC frame buffer RX list */ + HTC_ENDPOINT_CREDIT_DIST CreditDist; /* credit distribution structure (exposed to driver layer) */ + HTC_EP_CALLBACKS EpCallBacks; /* callbacks associated with this endpoint */ + int MaxTxQueueDepth; /* max depth of the TX queue before we need to + call driver's full handler */ + int CurrentTxQueueDepth; /* current TX queue depth */ + int MaxMsgLength; /* max length of endpoint message */ +#ifdef HTC_EP_STAT_PROFILING + HTC_ENDPOINT_STATS EndPointStats; /* endpoint statistics */ +#endif +} HTC_ENDPOINT; + +#ifdef HTC_EP_STAT_PROFILING +#define INC_HTC_EP_STAT(p,stat,count) (p)->EndPointStats.stat += (count); +#else +#define INC_HTC_EP_STAT(p,stat,count) +#endif + +#define HTC_SERVICE_TX_PACKET_TAG HTC_TX_PACKET_TAG_INTERNAL + +#define NUM_CONTROL_BUFFERS 8 +#define NUM_CONTROL_TX_BUFFERS 2 +#define NUM_CONTROL_RX_BUFFERS (NUM_CONTROL_BUFFERS - NUM_CONTROL_TX_BUFFERS) + +#define HTC_CONTROL_BUFFER_SIZE (HTC_MAX_CONTROL_MESSAGE_LENGTH + HTC_HDR_LENGTH) + +typedef struct HTC_CONTROL_BUFFER { + HTC_PACKET HtcPacket; + A_UINT8 Buffer[HTC_CONTROL_BUFFER_SIZE]; +} HTC_CONTROL_BUFFER; + +/* our HTC target state */ +typedef struct _HTC_TARGET { + HTC_ENDPOINT EndPoint[ENDPOINT_MAX]; + HTC_CONTROL_BUFFER HTCControlBuffers[NUM_CONTROL_BUFFERS]; + HTC_ENDPOINT_CREDIT_DIST *EpCreditDistributionListHead; + HTC_PACKET_QUEUE ControlBufferTXFreeList; + HTC_PACKET_QUEUE ControlBufferRXFreeList; + HTC_CREDIT_DIST_CALLBACK DistributeCredits; + HTC_CREDIT_INIT_CALLBACK InitCredits; + void *pCredDistContext; + int TargetCredits; + int TargetCreditSize; + A_MUTEX_T HTCLock; + A_MUTEX_T HTCRxLock; + A_MUTEX_T HTCTxLock; + AR6K_DEVICE Device; /* AR6K - specific state */ + A_UINT32 HTCStateFlags; + HTC_ENDPOINT_ID EpWaitingForBuffers; + A_BOOL TargetFailure; + void *pInstanceContext; +#define HTC_STATE_WAIT_BUFFERS (1 << 0) +#define HTC_STATE_STOPPING (1 << 1) +#ifdef HTC_CAPTURE_LAST_FRAME + HTC_FRAME_HDR LastFrameHdr; /* useful for debugging */ + A_UINT8 LastTrailer[256]; + A_UINT8 LastTrailerLength; +#endif +} HTC_TARGET; + +#define HTC_STOPPING(t) ((t)->HTCStateFlags & HTC_STATE_STOPPING) +#define LOCK_HTC(t) A_MUTEX_LOCK(&(t)->HTCLock); +#define UNLOCK_HTC(t) A_MUTEX_UNLOCK(&(t)->HTCLock); +#define LOCK_HTC_RX(t) A_MUTEX_LOCK(&(t)->HTCRxLock); +#define UNLOCK_HTC_RX(t) A_MUTEX_UNLOCK(&(t)->HTCRxLock); +#define LOCK_HTC_TX(t) A_MUTEX_LOCK(&(t)->HTCTxLock); +#define UNLOCK_HTC_TX(t) A_MUTEX_UNLOCK(&(t)->HTCTxLock); + +#define GET_HTC_TARGET_FROM_HANDLE(hnd) ((HTC_TARGET *)(hnd)) +#define HTC_RECYCLE_RX_PKT(target,p) \ +{ \ + HTC_PACKET_RESET_RX(pPacket); \ + HTCAddReceivePkt((HTC_HANDLE)(target),(p)); \ +} + +/* internal HTC functions */ +void HTCControlTxComplete(void *Context, HTC_PACKET *pPacket); +void HTCControlRecv(void *Context, HTC_PACKET *pPacket); +A_STATUS HTCWaitforControlMessage(HTC_TARGET *target, HTC_PACKET **ppControlPacket); +HTC_PACKET *HTCAllocControlBuffer(HTC_TARGET *target, HTC_PACKET_QUEUE *pList); +void HTCFreeControlBuffer(HTC_TARGET *target, HTC_PACKET *pPacket, HTC_PACKET_QUEUE *pList); +A_STATUS HTCIssueSend(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT8 Flags); +A_STATUS HTCIssueRecv(HTC_TARGET *target, HTC_PACKET *pPacket); +void HTCRecvCompleteHandler(void *Context, HTC_PACKET *pPacket); +A_STATUS HTCRecvMessagePendingHandler(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc); +void HTCProcessCreditRpt(HTC_TARGET *target, HTC_CREDIT_REPORT *pRpt, int NumEntries, HTC_ENDPOINT_ID FromEndpoint); +A_STATUS HTCSendSetupComplete(HTC_TARGET *target); +void HTCFlushRecvBuffers(HTC_TARGET *target); +void HTCFlushSendPkts(HTC_TARGET *target); +void DumpCreditDist(HTC_ENDPOINT_CREDIT_DIST *pEPDist); +void DumpCreditDistStates(HTC_TARGET *target); +void DebugDumpBytes(A_UCHAR *buffer, A_UINT16 length, char *pDescription); + +static INLINE HTC_PACKET *HTC_ALLOC_CONTROL_TX(HTC_TARGET *target) { + HTC_PACKET *pPacket = HTCAllocControlBuffer(target,&target->ControlBufferTXFreeList); + if (pPacket != NULL) { + /* set payload pointer area with some headroom */ + pPacket->pBuffer = pPacket->pBufferStart + HTC_HDR_LENGTH; + } + return pPacket; +} + +#define HTC_FREE_CONTROL_TX(t,p) HTCFreeControlBuffer((t),(p),&(t)->ControlBufferTXFreeList) +#define HTC_ALLOC_CONTROL_RX(t) HTCAllocControlBuffer((t),&(t)->ControlBufferRXFreeList) +#define HTC_FREE_CONTROL_RX(t,p) \ +{ \ + HTC_PACKET_RESET_RX(p); \ + HTCFreeControlBuffer((t),(p),&(t)->ControlBufferRXFreeList); \ +} + +#ifdef __cplusplus +} +#endif + +#endif /* _HTC_INTERNAL_H_ */ diff --git a/drivers/ar6000/htc/htc_recv.c b/drivers/ar6000/htc/htc_recv.c new file mode 100644 index 00000000000..4be2b0833c8 --- /dev/null +++ b/drivers/ar6000/htc/htc_recv.c @@ -0,0 +1,703 @@ +/* + * + * Copyright (c) 2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "htc_internal.h" + +#define HTCIssueRecv(t, p) \ + DevRecvPacket(&(t)->Device, \ + (p), \ + (p)->ActualLength) + +#define DO_RCV_COMPLETION(t,p,e) \ +{ \ + if ((p)->ActualLength > 0) { \ + AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" completing packet 0x%X (%d bytes) on ep : %d \n", \ + (A_UINT32)(p), (p)->ActualLength, (p)->Endpoint)); \ + (e)->EpCallBacks.EpRecv((e)->EpCallBacks.pContext, \ + (p)); \ + } else { \ + AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" recycling empty packet \n")); \ + HTC_RECYCLE_RX_PKT((t), (p)); \ + } \ +} + +#ifdef HTC_EP_STAT_PROFILING +#define HTC_RX_STAT_PROFILE(t,ep,lookAhead) \ +{ \ + LOCK_HTC_RX((t)); \ + INC_HTC_EP_STAT((ep), RxReceived, 1); \ + if ((lookAhead) != 0) { \ + INC_HTC_EP_STAT((ep), RxLookAheads, 1); \ + } \ + UNLOCK_HTC_RX((t)); \ +} +#else +#define HTC_RX_STAT_PROFILE(t,ep,lookAhead) +#endif + +static INLINE A_STATUS HTCProcessTrailer(HTC_TARGET *target, + A_UINT8 *pBuffer, + int Length, + A_UINT32 *pNextLookAhead, + HTC_ENDPOINT_ID FromEndpoint) +{ + HTC_RECORD_HDR *pRecord; + A_UINT8 *pRecordBuf; + HTC_LOOKAHEAD_REPORT *pLookAhead; + A_UINT8 *pOrigBuffer; + int origLength; + A_STATUS status; + + AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCProcessTrailer (length:%d) \n", Length)); + + if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) { + AR_DEBUG_PRINTBUF(pBuffer,Length,"Recv Trailer"); + } + + pOrigBuffer = pBuffer; + origLength = Length; + status = A_OK; + + while (Length > 0) { + + if (Length < sizeof(HTC_RECORD_HDR)) { + status = A_EPROTO; + break; + } + /* these are byte aligned structs */ + pRecord = (HTC_RECORD_HDR *)pBuffer; + Length -= sizeof(HTC_RECORD_HDR); + pBuffer += sizeof(HTC_RECORD_HDR); + + if (pRecord->Length > Length) { + /* no room left in buffer for record */ + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + (" invalid record length: %d (id:%d) buffer has: %d bytes left \n", + pRecord->Length, pRecord->RecordID, Length)); + status = A_EPROTO; + break; + } + /* start of record follows the header */ + pRecordBuf = pBuffer; + + switch (pRecord->RecordID) { + case HTC_RECORD_CREDITS: + AR_DEBUG_ASSERT(pRecord->Length >= sizeof(HTC_CREDIT_REPORT)); + HTCProcessCreditRpt(target, + (HTC_CREDIT_REPORT *)pRecordBuf, + pRecord->Length / (sizeof(HTC_CREDIT_REPORT)), + FromEndpoint); + break; + case HTC_RECORD_LOOKAHEAD: + AR_DEBUG_ASSERT(pRecord->Length >= sizeof(HTC_LOOKAHEAD_REPORT)); + pLookAhead = (HTC_LOOKAHEAD_REPORT *)pRecordBuf; + if ((pLookAhead->PreValid == ((~pLookAhead->PostValid) & 0xFF)) && + (pNextLookAhead != NULL)) { + + AR_DEBUG_PRINTF(ATH_DEBUG_RECV, + (" LookAhead Report Found (pre valid:0x%X, post valid:0x%X) \n", + pLookAhead->PreValid, + pLookAhead->PostValid)); + + /* look ahead bytes are valid, copy them over */ + ((A_UINT8 *)pNextLookAhead)[0] = pLookAhead->LookAhead[0]; + ((A_UINT8 *)pNextLookAhead)[1] = pLookAhead->LookAhead[1]; + ((A_UINT8 *)pNextLookAhead)[2] = pLookAhead->LookAhead[2]; + ((A_UINT8 *)pNextLookAhead)[3] = pLookAhead->LookAhead[3]; + + if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) { + DebugDumpBytes((A_UINT8 *)pNextLookAhead,4,"Next Look Ahead"); + } + } + break; + default: + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, (" unhandled record: id:%d length:%d \n", + pRecord->RecordID, pRecord->Length)); + break; + } + + if (A_FAILED(status)) { + break; + } + + /* advance buffer past this record for next time around */ + pBuffer += pRecord->Length; + Length -= pRecord->Length; + } + + if (A_FAILED(status)) { + DebugDumpBytes(pOrigBuffer,origLength,"BAD Recv Trailer"); + } + + AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCProcessTrailer \n")); + return status; + +} + +/* process a received message (i.e. strip off header, process any trailer data) + * note : locks must be released when this function is called */ +static A_STATUS HTCProcessRecvHeader(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT32 *pNextLookAhead) +{ + A_UINT8 temp; + A_UINT8 *pBuf; + A_STATUS status = A_OK; + A_UINT16 payloadLen; + A_UINT32 lookAhead; + + pBuf = pPacket->pBuffer; + + AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCProcessRecvHeader \n")); + + if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) { + AR_DEBUG_PRINTBUF(pBuf,pPacket->ActualLength,"HTC Recv PKT"); + } + + do { + /* note, we cannot assume the alignment of pBuffer, so we use the safe macros to + * retrieve 16 bit fields */ + payloadLen = A_GET_UINT16_FIELD(pBuf, HTC_FRAME_HDR, PayloadLen); + + ((A_UINT8 *)&lookAhead)[0] = pBuf[0]; + ((A_UINT8 *)&lookAhead)[1] = pBuf[1]; + ((A_UINT8 *)&lookAhead)[2] = pBuf[2]; + ((A_UINT8 *)&lookAhead)[3] = pBuf[3]; + + if (lookAhead != pPacket->HTCReserved) { + /* somehow the lookahead that gave us the full read length did not + * reflect the actual header in the pending message */ + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + ("HTCProcessRecvHeader, lookahead mismatch! \n")); + DebugDumpBytes((A_UINT8 *)&pPacket->HTCReserved,4,"Expected Message LookAhead"); + DebugDumpBytes(pBuf,sizeof(HTC_FRAME_HDR),"Current Frame Header"); +#ifdef HTC_CAPTURE_LAST_FRAME + DebugDumpBytes((A_UINT8 *)&target->LastFrameHdr,sizeof(HTC_FRAME_HDR),"Last Frame Header"); + if (target->LastTrailerLength != 0) { + DebugDumpBytes(target->LastTrailer, + target->LastTrailerLength, + "Last trailer"); + } +#endif + status = A_EPROTO; + break; + } + + /* get flags */ + temp = A_GET_UINT8_FIELD(pBuf, HTC_FRAME_HDR, Flags); + + if (temp & HTC_FLAGS_RECV_TRAILER) { + /* this packet has a trailer */ + + /* extract the trailer length in control byte 0 */ + temp = A_GET_UINT8_FIELD(pBuf, HTC_FRAME_HDR, ControlBytes[0]); + + if ((temp < sizeof(HTC_RECORD_HDR)) || (temp > payloadLen)) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + ("HTCProcessRecvHeader, invalid header (payloadlength should be :%d, CB[0] is:%d) \n", + payloadLen, temp)); + status = A_EPROTO; + break; + } + + /* process trailer data that follows HDR + application payload */ + status = HTCProcessTrailer(target, + (pBuf + HTC_HDR_LENGTH + payloadLen - temp), + temp, + pNextLookAhead, + pPacket->Endpoint); + + if (A_FAILED(status)) { + break; + } + +#ifdef HTC_CAPTURE_LAST_FRAME + A_MEMCPY(target->LastTrailer, (pBuf + HTC_HDR_LENGTH + payloadLen - temp), temp); + target->LastTrailerLength = temp; +#endif + /* trim length by trailer bytes */ + pPacket->ActualLength -= temp; + } +#ifdef HTC_CAPTURE_LAST_FRAME + else { + target->LastTrailerLength = 0; + } +#endif + + /* if we get to this point, the packet is good */ + /* remove header and adjust length */ + pPacket->pBuffer += HTC_HDR_LENGTH; + pPacket->ActualLength -= HTC_HDR_LENGTH; + + } while (FALSE); + + if (A_FAILED(status)) { + /* dump the whole packet */ + DebugDumpBytes(pBuf,pPacket->ActualLength,"BAD HTC Recv PKT"); + } else { +#ifdef HTC_CAPTURE_LAST_FRAME + A_MEMCPY(&target->LastFrameHdr,pBuf,sizeof(HTC_FRAME_HDR)); +#endif + if (AR_DEBUG_LVL_CHECK(ATH_DEBUG_RECV)) { + if (pPacket->ActualLength > 0) { + AR_DEBUG_PRINTBUF(pPacket->pBuffer,pPacket->ActualLength,"HTC - Application Msg"); + } + } + } + + AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCProcessRecvHeader \n")); + return status; +} + +/* asynchronous completion handler for recv packet fetching, when the device layer + * completes a read request, it will call this completion handler */ +void HTCRecvCompleteHandler(void *Context, HTC_PACKET *pPacket) +{ + HTC_TARGET *target = (HTC_TARGET *)Context; + HTC_ENDPOINT *pEndpoint; + A_UINT32 nextLookAhead = 0; + A_STATUS status; + + AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("+HTCRecvCompleteHandler (status:%d, ep:%d) \n", + pPacket->Status, pPacket->Endpoint)); + + AR_DEBUG_ASSERT(pPacket->Endpoint < ENDPOINT_MAX); + pEndpoint = &target->EndPoint[pPacket->Endpoint]; + pPacket->Completion = NULL; + + /* get completion status */ + status = pPacket->Status; + + do { + if (A_FAILED(status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HTCRecvCompleteHandler: request failed (status:%d, ep:%d) \n", + pPacket->Status, pPacket->Endpoint)); + break; + } + /* process the header for any trailer data */ + status = HTCProcessRecvHeader(target,pPacket,&nextLookAhead); + + if (A_FAILED(status)) { + break; + } + /* was there a lookahead for the next packet? */ + if (nextLookAhead != 0) { + A_STATUS nextStatus; + AR_DEBUG_PRINTF(ATH_DEBUG_RECV, + ("HTCRecvCompleteHandler - next look ahead was non-zero : 0x%X \n", + nextLookAhead)); + /* we have another packet, get the next packet fetch started (pipelined) before + * we call into the endpoint's callback, this will start another async request */ + nextStatus = HTCRecvMessagePendingHandler(target,nextLookAhead,NULL); + if (A_EPROTO == nextStatus) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + ("Next look ahead from recv header was INVALID\n")); + DebugDumpBytes((A_UINT8 *)&nextLookAhead, + 4, + "BAD lookahead from lookahead report"); + } + } else { + AR_DEBUG_PRINTF(ATH_DEBUG_RECV, + ("HTCRecvCompleteHandler - rechecking for more messages...\n")); + /* if we did not get anything on the look-ahead, + * call device layer to asynchronously re-check for messages. If we can keep the async + * processing going we get better performance. If there is a pending message we will keep processing + * messages asynchronously which should pipeline things nicely */ + DevCheckPendingRecvMsgsAsync(&target->Device); + } + + HTC_RX_STAT_PROFILE(target,pEndpoint,nextLookAhead); + DO_RCV_COMPLETION(target,pPacket,pEndpoint); + + } while (FALSE); + + if (A_FAILED(status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + ("HTCRecvCompleteHandler , message fetch failed (status = %d) \n", + status)); + /* recyle this packet */ + HTC_RECYCLE_RX_PKT(target, pPacket); + } + + AR_DEBUG_PRINTF(ATH_DEBUG_RECV, ("-HTCRecvCompleteHandler\n")); +} + +/* synchronously wait for a control message from the target, + * This function is used at initialization time ONLY. At init messages + * on ENDPOINT 0 are expected. */ +A_STATUS HTCWaitforControlMessage(HTC_TARGET *target, HTC_PACKET **ppControlPacket) +{ + A_STATUS status; + A_UINT32 lookAhead; + HTC_PACKET *pPacket = NULL; + HTC_FRAME_HDR *pHdr; + + AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+HTCWaitforControlMessage \n")); + + do { + + *ppControlPacket = NULL; + + /* call the polling function to see if we have a message */ + status = DevPollMboxMsgRecv(&target->Device, + &lookAhead, + HTC_TARGET_RESPONSE_TIMEOUT); + + if (A_FAILED(status)) { + break; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_RECV, + ("HTCWaitforControlMessage : lookAhead : 0x%X \n", lookAhead)); + + /* check the lookahead */ + pHdr = (HTC_FRAME_HDR *)&lookAhead; + + if (pHdr->EndpointID != ENDPOINT_0) { + /* unexpected endpoint number, should be zero */ + AR_DEBUG_ASSERT(FALSE); + status = A_EPROTO; + break; + } + + if (A_FAILED(status)) { + /* bad message */ + AR_DEBUG_ASSERT(FALSE); + status = A_EPROTO; + break; + } + + pPacket = HTC_ALLOC_CONTROL_RX(target); + + if (pPacket == NULL) { + AR_DEBUG_ASSERT(FALSE); + status = A_NO_MEMORY; + break; + } + + pPacket->HTCReserved = lookAhead; + pPacket->ActualLength = pHdr->PayloadLen + HTC_HDR_LENGTH; + + if (pPacket->ActualLength > pPacket->BufferLength) { + AR_DEBUG_ASSERT(FALSE); + status = A_EPROTO; + break; + } + + /* we want synchronous operation */ + pPacket->Completion = NULL; + + /* get the message from the device, this will block */ + status = HTCIssueRecv(target, pPacket); + + if (A_FAILED(status)) { + break; + } + + /* process receive header */ + status = HTCProcessRecvHeader(target,pPacket,NULL); + + pPacket->Status = status; + + if (A_FAILED(status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + ("HTCWaitforControlMessage, HTCProcessRecvHeader failed (status = %d) \n", + status)); + break; + } + + /* give the caller this control message packet, they are responsible to free */ + *ppControlPacket = pPacket; + + } while (FALSE); + + if (A_FAILED(status)) { + if (pPacket != NULL) { + /* cleanup buffer on error */ + HTC_FREE_CONTROL_RX(target,pPacket); + } + } + + AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-HTCWaitforControlMessage \n")); + + return status; +} + +/* callback when device layer or lookahead report parsing detects a pending message */ +A_STATUS HTCRecvMessagePendingHandler(void *Context, A_UINT32 LookAhead, A_BOOL *pAsyncProc) +{ + HTC_TARGET *target = (HTC_TARGET *)Context; + A_STATUS status = A_OK; + HTC_PACKET *pPacket = NULL; + HTC_FRAME_HDR *pHdr; + HTC_ENDPOINT *pEndpoint; + A_BOOL asyncProc = FALSE; + + AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("+HTCRecvMessagePendingHandler LookAhead:0x%X \n",LookAhead)); + + if (IS_DEV_IRQ_PROCESSING_ASYNC_ALLOWED(&target->Device)) { + /* We use async mode to get the packets if the device layer supports it. + * The device layer interfaces with HIF in which HIF may have restrictions on + * how interrupts are processed */ + asyncProc = TRUE; + } + + if (pAsyncProc != NULL) { + /* indicate to caller how we decided to process this */ + *pAsyncProc = asyncProc; + } + + while (TRUE) { + + pHdr = (HTC_FRAME_HDR *)&LookAhead; + + if (pHdr->EndpointID >= ENDPOINT_MAX) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Invalid Endpoint in look-ahead: %d \n",pHdr->EndpointID)); + /* invalid endpoint */ + status = A_EPROTO; + break; + } + + if (pHdr->PayloadLen > HTC_MAX_PAYLOAD_LENGTH) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Payload length %d exceeds max HTC : %d !\n", + pHdr->PayloadLen, HTC_MAX_PAYLOAD_LENGTH)); + status = A_EPROTO; + break; + } + + pEndpoint = &target->EndPoint[pHdr->EndpointID]; + + if (0 == pEndpoint->ServiceID) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Endpoint %d is not connected !\n",pHdr->EndpointID)); + /* endpoint isn't even connected */ + status = A_EPROTO; + break; + } + + /* lock RX to get a buffer */ + LOCK_HTC_RX(target); + + /* get a packet from the endpoint recv queue */ + pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers); + + if (NULL == pPacket) { + /* check for refill handler */ + if (pEndpoint->EpCallBacks.EpRecvRefill != NULL) { + UNLOCK_HTC_RX(target); + /* call the re-fill handler */ + pEndpoint->EpCallBacks.EpRecvRefill(pEndpoint->EpCallBacks.pContext, + pHdr->EndpointID); + LOCK_HTC_RX(target); + /* check if we have more buffers */ + pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers); + /* fall through */ + } + } + + if (NULL == pPacket) { + /* this is not an error, we simply need to mark that we are waiting for buffers.*/ + target->HTCStateFlags |= HTC_STATE_WAIT_BUFFERS; + target->EpWaitingForBuffers = pHdr->EndpointID; + status = A_NO_MEMORY; + } + + UNLOCK_HTC_RX(target); + + if (A_FAILED(status)) { + /* no buffers */ + break; + } + + AR_DEBUG_ASSERT(pPacket->Endpoint == pHdr->EndpointID); + + /* make sure this message can fit in the endpoint buffer */ + if ((pHdr->PayloadLen + HTC_HDR_LENGTH) > pPacket->BufferLength) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + ("Payload Length Error : header reports payload of: %d, endpoint buffer size: %d \n", + pHdr->PayloadLen, pPacket->BufferLength)); + status = A_EPROTO; + break; + } + + pPacket->HTCReserved = LookAhead; /* set expected look ahead */ + /* set the amount of data to fetch */ + pPacket->ActualLength = pHdr->PayloadLen + HTC_HDR_LENGTH; + + if (asyncProc) { + /* we use async mode to get the packet if the device layer supports it + * set our callback and context */ + pPacket->Completion = HTCRecvCompleteHandler; + pPacket->pContext = target; + } else { + /* fully synchronous */ + pPacket->Completion = NULL; + } + + /* go fetch the packet */ + status = HTCIssueRecv(target, pPacket); + + if (A_FAILED(status)) { + break; + } + + if (asyncProc) { + /* we did this asynchronously so we can get out of the loop, the asynch processing + * creates a chain of requests to continue processing pending messages in the + * context of callbacks */ + break; + } + + /* in the sync case, we process the packet, check lookaheads and then repeat */ + + LookAhead = 0; + status = HTCProcessRecvHeader(target,pPacket,&LookAhead); + + if (A_FAILED(status)) { + break; + } + + HTC_RX_STAT_PROFILE(target,pEndpoint,LookAhead); + DO_RCV_COMPLETION(target,pPacket,pEndpoint); + + pPacket = NULL; + + if (0 == LookAhead) { + break; + } + + } + + if (A_NO_MEMORY == status) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + (" Endpoint :%d has no buffers, blocking receiver to prevent overrun.. \n", + pHdr->EndpointID)); + /* try to stop receive at the device layer */ + DevStopRecv(&target->Device, asyncProc ? DEV_STOP_RECV_ASYNC : DEV_STOP_RECV_SYNC); + status = A_OK; + } else if (A_FAILED(status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + ("Failed to get pending message : LookAhead Value: 0x%X (status = %d) \n", + LookAhead, status)); + if (pPacket != NULL) { + /* clean up packet on error */ + HTC_RECYCLE_RX_PKT(target, pPacket); + } + } + + AR_DEBUG_PRINTF(ATH_DEBUG_RECV,("-HTCRecvMessagePendingHandler \n")); + + return status; +} + +/* Makes a buffer available to the HTC module */ +A_STATUS HTCAddReceivePkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket) +{ + HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); + HTC_ENDPOINT *pEndpoint; + A_BOOL unblockRecv = FALSE; + A_STATUS status = A_OK; + + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, + ("+- HTCAddReceivePkt: endPointId: %d, buffer: 0x%X, length: %d\n", + pPacket->Endpoint, (A_UINT32)pPacket->pBuffer, pPacket->BufferLength)); + + do { + + if (HTC_STOPPING(target)) { + status = A_ECANCELED; + break; + } + + AR_DEBUG_ASSERT(pPacket->Endpoint < ENDPOINT_MAX); + + pEndpoint = &target->EndPoint[pPacket->Endpoint]; + + LOCK_HTC_RX(target); + + /* store receive packet */ + HTC_PACKET_ENQUEUE(&pEndpoint->RxBuffers, pPacket); + + /* check if we are blocked waiting for a new buffer */ + if (target->HTCStateFlags & HTC_STATE_WAIT_BUFFERS) { + if (target->EpWaitingForBuffers == pPacket->Endpoint) { + AR_DEBUG_PRINTF(ATH_DEBUG_RECV,(" receiver was blocked on ep:%d, unblocking.. \n", + target->EpWaitingForBuffers)); + target->HTCStateFlags &= ~HTC_STATE_WAIT_BUFFERS; + target->EpWaitingForBuffers = ENDPOINT_MAX; + unblockRecv = TRUE; + } + } + + UNLOCK_HTC_RX(target); + + if (unblockRecv && !HTC_STOPPING(target)) { + /* TODO : implement a buffer threshold count? */ + DevEnableRecv(&target->Device,DEV_ENABLE_RECV_SYNC); + } + + } while (FALSE); + + return status; +} + +static void HTCFlushEndpointRX(HTC_TARGET *target, HTC_ENDPOINT *pEndpoint) +{ + HTC_PACKET *pPacket; + + LOCK_HTC_RX(target); + + while (1) { + pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->RxBuffers); + if (NULL == pPacket) { + break; + } + UNLOCK_HTC_RX(target); + pPacket->Status = A_ECANCELED; + pPacket->ActualLength = 0; + AR_DEBUG_PRINTF(ATH_DEBUG_RECV, (" Flushing RX packet:0x%X, length:%d, ep:%d \n", + (A_UINT32)pPacket, pPacket->BufferLength, pPacket->Endpoint)); + /* give the packet back */ + pEndpoint->EpCallBacks.EpRecv(pEndpoint->EpCallBacks.pContext, + pPacket); + LOCK_HTC_RX(target); + } + + UNLOCK_HTC_RX(target); + + +} + +void HTCFlushRecvBuffers(HTC_TARGET *target) +{ + HTC_ENDPOINT *pEndpoint; + int i; + + /* NOTE: no need to flush endpoint 0, these buffers were + * allocated as part of the HTC struct */ + for (i = ENDPOINT_1; i < ENDPOINT_MAX; i++) { + pEndpoint = &target->EndPoint[i]; + if (pEndpoint->ServiceID == 0) { + /* not in use.. */ + continue; + } + HTCFlushEndpointRX(target,pEndpoint); + } + + +} + + diff --git a/drivers/ar6000/htc/htc_send.c b/drivers/ar6000/htc/htc_send.c new file mode 100644 index 00000000000..cf0dabef472 --- /dev/null +++ b/drivers/ar6000/htc/htc_send.c @@ -0,0 +1,538 @@ +/* + * + * Copyright (c) 2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "htc_internal.h" + +#define DO_EP_TX_COMPLETION(ep,p) \ +{ \ + (p)->Completion = NULL; \ + (ep)->EpCallBacks.EpTxComplete((ep)->EpCallBacks.pContext,(p)); \ +} + + +/* call the distribute credits callback with the distribution */ +#define DO_DISTRIBUTION(t,reason,description,pList) \ +{ \ + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, \ + (" calling distribute function (%s) (dfn:0x%X, ctxt:0x%X, dist:0x%X) \n", \ + (description), \ + (A_UINT32)(t)->DistributeCredits, \ + (A_UINT32)(t)->pCredDistContext, \ + (A_UINT32)pList)); \ + (t)->DistributeCredits((t)->pCredDistContext, \ + (pList), \ + (reason)); \ +} + +/* our internal send packet completion handler when packets are submited to the AR6K device + * layer */ +static void HTCSendPktCompletionHandler(void *Context, HTC_PACKET *pPacket) +{ + HTC_TARGET *target = (HTC_TARGET *)Context; + HTC_ENDPOINT *pEndpoint = &target->EndPoint[pPacket->Endpoint]; + + + if (A_FAILED(pPacket->Status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + ("HTCSendPktCompletionHandler: request failed (status:%d, ep:%d) \n", + pPacket->Status, pPacket->Endpoint)); + } + /* first, fixup the head room we allocated */ + pPacket->pBuffer += HTC_HDR_LENGTH; + /* do completion */ + DO_EP_TX_COMPLETION(pEndpoint,pPacket); +} + +A_STATUS HTCIssueSend(HTC_TARGET *target, HTC_PACKET *pPacket, A_UINT8 SendFlags) +{ + A_STATUS status; + A_UINT8 *pHdrBuf; + A_BOOL sync = FALSE; + + /* caller always provides headrooom */ + pPacket->pBuffer -= HTC_HDR_LENGTH; + pHdrBuf = pPacket->pBuffer; + /* setup frame header */ + A_SET_UINT16_FIELD(pHdrBuf,HTC_FRAME_HDR,PayloadLen,(A_UINT16)pPacket->ActualLength); + A_SET_UINT8_FIELD(pHdrBuf,HTC_FRAME_HDR,Flags,SendFlags); + A_SET_UINT8_FIELD(pHdrBuf,HTC_FRAME_HDR,EndpointID, (A_UINT8)pPacket->Endpoint); + + if (pPacket->Completion == NULL) { + /* mark that this request was synchronously issued */ + sync = TRUE; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, + ("+-HTCIssueSend: transmit length : %d (%s) \n", + pPacket->ActualLength + HTC_HDR_LENGTH, + sync ? "SYNC" : "ASYNC" )); + + /* send message to device */ + status = DevSendPacket(&target->Device, + pPacket, + pPacket->ActualLength + HTC_HDR_LENGTH); + + if (sync) { + /* use local sync variable. If this was issued asynchronously, pPacket is no longer + * safe to access. */ + pPacket->pBuffer += HTC_HDR_LENGTH; + } + + /* if this request was asynchronous, the packet completion routine will be invoked by + * the device layer when the HIF layer completes the request */ + + return status; +} + +/* try to send the current packet or a packet at the head of the TX queue, + * if there are no credits, the packet remains in the queue. */ +static void HTCTrySend(HTC_TARGET *target, + HTC_PACKET *pPacketToSend, + HTC_ENDPOINT_ID ep) +{ + HTC_PACKET *pPacket; + HTC_ENDPOINT *pEndpoint; + int creditsRequired; + A_UINT8 sendFlags; + + AR_DEBUG_PRINTF(ATH_DEBUG_SEND,("+HTCTrySend (pPkt:0x%X)\n",(A_UINT32)pPacketToSend)); + + pEndpoint = &target->EndPoint[ep]; + + LOCK_HTC_TX(target); + + if (pPacketToSend != NULL) { + /* caller supplied us a packet to queue to the tail of the HTC TX queue before + * we check the tx queue */ + HTC_PACKET_ENQUEUE(&pEndpoint->TxQueue,pPacketToSend); + pEndpoint->CurrentTxQueueDepth++; + } + + /* now drain the TX queue for transmission as long as we have enough + * credits */ + + while (1) { + + if (HTC_QUEUE_EMPTY(&pEndpoint->TxQueue)) { + /* nothing in the queue */ + break; + } + + sendFlags = 0; + + /* get packet at head, but don't remove it */ + pPacket = HTC_GET_PKT_AT_HEAD(&pEndpoint->TxQueue); + AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Got head packet:0x%X , Queue Depth: %d\n", + (A_UINT32)pPacket, pEndpoint->CurrentTxQueueDepth)); + + /* figure out how many credits this message requires */ + creditsRequired = pPacket->ActualLength + HTC_HDR_LENGTH; + creditsRequired += target->TargetCreditSize - 1; + creditsRequired /= target->TargetCreditSize; + + AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Creds Required:%d Got:%d\n", + creditsRequired, pEndpoint->CreditDist.TxCredits)); + + if (pEndpoint->CreditDist.TxCredits < creditsRequired) { + + /* not enough credits */ + + if (pPacket->Endpoint == ENDPOINT_0) { + /* leave it in the queue */ + break; + } + /* invoke the registered distribution function only if this is not + * endpoint 0, we let the driver layer provide more credits if it can. + * We pass the credit distribution list starting at the endpoint in question + * */ + + /* set how many credits we need */ + pEndpoint->CreditDist.TxCreditsSeek = + creditsRequired - pEndpoint->CreditDist.TxCredits; + DO_DISTRIBUTION(target, + HTC_CREDIT_DIST_SEEK_CREDITS, + "Seek Credits", + &pEndpoint->CreditDist); + + pEndpoint->CreditDist.TxCreditsSeek = 0; + + if (pEndpoint->CreditDist.TxCredits < creditsRequired) { + /* still not enough credits to send, leave packet in the queue */ + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, + (" Not enough credits for ep %d leaving packet in queue..\n", + pPacket->Endpoint)); + break; + } + + } + + pEndpoint->CreditDist.TxCredits -= creditsRequired; + INC_HTC_EP_STAT(pEndpoint, TxCreditsConsummed, creditsRequired); + + /* check if we need credits */ + if (pEndpoint->CreditDist.TxCredits < pEndpoint->CreditDist.TxCreditsPerMaxMsg) { + sendFlags |= HTC_FLAGS_NEED_CREDIT_UPDATE; + INC_HTC_EP_STAT(pEndpoint, TxCreditLowIndications, 1); + AR_DEBUG_PRINTF(ATH_DEBUG_SEND,(" Host Needs Credits \n")); + } + + /* now we can fully dequeue */ + pPacket = HTC_PACKET_DEQUEUE(&pEndpoint->TxQueue); + pEndpoint->CurrentTxQueueDepth--; + + INC_HTC_EP_STAT(pEndpoint, TxIssued, 1); + + UNLOCK_HTC_TX(target); + + HTCIssueSend(target, pPacket, sendFlags); + + LOCK_HTC_TX(target); + + /* go back and check for more messages */ + } + + if (pEndpoint->CurrentTxQueueDepth >= pEndpoint->MaxTxQueueDepth) { + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Endpoint %d, TX queue is full, Depth:%d, Max:%d \n", + ep, pEndpoint->CurrentTxQueueDepth, pEndpoint->MaxTxQueueDepth)); + UNLOCK_HTC_TX(target); + /* queue is now full, let caller know */ + if (pEndpoint->EpCallBacks.EpSendFull != NULL) { + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Calling driver's send full callback.... \n")); + pEndpoint->EpCallBacks.EpSendFull(pEndpoint->EpCallBacks.pContext, ep); + } + } else { + UNLOCK_HTC_TX(target); + /* queue is now available for new packet, let caller know */ + if (pEndpoint->EpCallBacks.EpSendAvail) + pEndpoint->EpCallBacks.EpSendAvail(pEndpoint->EpCallBacks.pContext, ep); + } + + AR_DEBUG_PRINTF(ATH_DEBUG_SEND,("-HTCTrySend: \n")); +} + +/* HTC API - HTCSendPkt */ +A_STATUS HTCSendPkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket) +{ + HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); + HTC_ENDPOINT *pEndpoint; + HTC_ENDPOINT_ID ep; + A_STATUS status = A_OK; + + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, + ("+HTCSendPkt: Enter endPointId: %d, buffer: 0x%X, length: %d \n", + pPacket->Endpoint, (A_UINT32)pPacket->pBuffer, pPacket->ActualLength)); + + ep = pPacket->Endpoint; + AR_DEBUG_ASSERT(ep < ENDPOINT_MAX); + pEndpoint = &target->EndPoint[ep]; + + do { + + if (HTC_STOPPING(target)) { + status = A_ECANCELED; + pPacket->Status = status; + DO_EP_TX_COMPLETION(pEndpoint,pPacket); + break; + } + /* everything sent through this interface is asynchronous */ + /* fill in HTC completion routines */ + pPacket->Completion = HTCSendPktCompletionHandler; + pPacket->pContext = target; + + HTCTrySend(target, pPacket, ep); + + } while (FALSE); + + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCSendPkt \n")); + + return status; +} + + +/* check TX queues to drain because of credit distribution update */ +static INLINE void HTCCheckEndpointTxQueues(HTC_TARGET *target) +{ + HTC_ENDPOINT *pEndpoint; + HTC_ENDPOINT_CREDIT_DIST *pDistItem; + + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("+HTCCheckEndpointTxQueues \n")); + pDistItem = target->EpCreditDistributionListHead; + + /* run through the credit distribution list to see + * if there are packets queued + * NOTE: no locks need to be taken since the distribution list + * is not dynamic (cannot be re-ordered) and we are not modifying any state */ + while (pDistItem != NULL) { + pEndpoint = (HTC_ENDPOINT *)pDistItem->pHTCReserved; + + if (pEndpoint->CurrentTxQueueDepth > 0) { + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Ep %d has %d credits and %d Packets in TX Queue \n", + pDistItem->Endpoint, pEndpoint->CreditDist.TxCredits, pEndpoint->CurrentTxQueueDepth)); + /* try to start the stalled queue, this list is ordered by priority. + * Highest priority queue get's processed first, if there are credits available the + * highest priority queue will get a chance to reclaim credits from lower priority + * ones */ + HTCTrySend(target, NULL, pDistItem->Endpoint); + } + + pDistItem = pDistItem->pNext; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCCheckEndpointTxQueues \n")); +} + +/* process credit reports and call distribution function */ +void HTCProcessCreditRpt(HTC_TARGET *target, HTC_CREDIT_REPORT *pRpt, int NumEntries, HTC_ENDPOINT_ID FromEndpoint) +{ + int i; + HTC_ENDPOINT *pEndpoint; + int totalCredits = 0; + A_BOOL doDist = FALSE; + + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("+HTCProcessCreditRpt, Credit Report Entries:%d \n", NumEntries)); + + /* lock out TX while we update credits */ + LOCK_HTC_TX(target); + + for (i = 0; i < NumEntries; i++, pRpt++) { + if (pRpt->EndpointID >= ENDPOINT_MAX) { + AR_DEBUG_ASSERT(FALSE); + break; + } + + pEndpoint = &target->EndPoint[pRpt->EndpointID]; + + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Endpoint %d got %d credits \n", + pRpt->EndpointID, pRpt->Credits)); + + +#ifdef HTC_EP_STAT_PROFILING + + INC_HTC_EP_STAT(pEndpoint, TxCreditRpts, 1); + INC_HTC_EP_STAT(pEndpoint, TxCreditsReturned, pRpt->Credits); + + if (FromEndpoint == pRpt->EndpointID) { + /* this credit report arrived on the same endpoint indicating it arrived in an RX + * packet */ + INC_HTC_EP_STAT(pEndpoint, TxCreditsFromRx, pRpt->Credits); + INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromRx, 1); + } else if (FromEndpoint == ENDPOINT_0) { + /* this credit arrived on endpoint 0 as a NULL message */ + INC_HTC_EP_STAT(pEndpoint, TxCreditsFromEp0, pRpt->Credits); + INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromEp0, 1); + } else { + /* arrived on another endpoint */ + INC_HTC_EP_STAT(pEndpoint, TxCreditsFromOther, pRpt->Credits); + INC_HTC_EP_STAT(pEndpoint, TxCreditRptsFromOther, 1); + } + +#endif + + if (ENDPOINT_0 == pRpt->EndpointID) { + /* always give endpoint 0 credits back */ + pEndpoint->CreditDist.TxCredits += pRpt->Credits; + } else { + /* for all other endpoints, update credits to distribute, the distribution function + * will handle giving out credits back to the endpoints */ + pEndpoint->CreditDist.TxCreditsToDist += pRpt->Credits; + /* flag that we have to do the distribution */ + doDist = TRUE; + } + + totalCredits += pRpt->Credits; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, (" Report indicated %d credits to distribute \n", totalCredits)); + + if (doDist) { + /* this was a credit return based on a completed send operations + * note, this is done with the lock held */ + DO_DISTRIBUTION(target, + HTC_CREDIT_DIST_SEND_COMPLETE, + "Send Complete", + target->EpCreditDistributionListHead->pNext); + } + + UNLOCK_HTC_TX(target); + + if (totalCredits) { + HTCCheckEndpointTxQueues(target); + } + + AR_DEBUG_PRINTF(ATH_DEBUG_SEND, ("-HTCProcessCreditRpt \n")); +} + +/* flush endpoint TX queue */ +static void HTCFlushEndpointTX(HTC_TARGET *target, HTC_ENDPOINT *pEndpoint, HTC_TX_TAG Tag) +{ + HTC_PACKET *pPacket; + HTC_PACKET_QUEUE discardQueue; + + /* initialize the discard queue */ + INIT_HTC_PACKET_QUEUE(&discardQueue); + + LOCK_HTC_TX(target); + + /* interate from the front of the TX queue and flush out packets */ + ITERATE_OVER_LIST_ALLOW_REMOVE(&pEndpoint->TxQueue, pPacket, HTC_PACKET, ListLink) { + + /* check for removal */ + if ((HTC_TX_PACKET_TAG_ALL == Tag) || (Tag == pPacket->PktInfo.AsTx.Tag)) { + /* remove from queue */ + HTC_PACKET_REMOVE(pPacket); + /* add it to the discard pile */ + HTC_PACKET_ENQUEUE(&discardQueue, pPacket); + pEndpoint->CurrentTxQueueDepth--; + } + + } ITERATE_END; + + UNLOCK_HTC_TX(target); + + /* empty the discard queue */ + while (1) { + pPacket = HTC_PACKET_DEQUEUE(&discardQueue); + if (NULL == pPacket) { + break; + } + pPacket->Status = A_ECANCELED; + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, (" Flushing TX packet:0x%X, length:%d, ep:%d tag:0x%X \n", + (A_UINT32)pPacket, pPacket->ActualLength, pPacket->Endpoint, pPacket->PktInfo.AsTx.Tag)); + DO_EP_TX_COMPLETION(pEndpoint,pPacket); + } + +} + +void DumpCreditDist(HTC_ENDPOINT_CREDIT_DIST *pEPDist) +{ +#ifdef DEBUG + HTC_ENDPOINT *pEndpoint = (HTC_ENDPOINT *)pEPDist->pHTCReserved; +#endif + + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("--- EP : %d ServiceID: 0x%X --------------\n", + pEPDist->Endpoint, pEPDist->ServiceID)); + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" this:0x%X next:0x%X prev:0x%X\n", + (A_UINT32)pEPDist, (A_UINT32)pEPDist->pNext, (A_UINT32)pEPDist->pPrev)); + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" DistFlags : 0x%X \n", pEPDist->DistFlags)); + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsNorm : %d \n", pEPDist->TxCreditsNorm)); + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsMin : %d \n", pEPDist->TxCreditsMin)); + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCredits : %d \n", pEPDist->TxCredits)); + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsAssigned : %d \n", pEPDist->TxCreditsAssigned)); + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsSeek : %d \n", pEPDist->TxCreditsSeek)); + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditSize : %d \n", pEPDist->TxCreditSize)); + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsPerMaxMsg : %d \n", pEPDist->TxCreditsPerMaxMsg)); + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxCreditsToDist : %d \n", pEPDist->TxCreditsToDist)); + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, (" TxQueueDepth : %d \n", pEndpoint->CurrentTxQueueDepth)); + AR_DEBUG_PRINTF(ATH_DEBUG_ANY, ("----------------------------------------------------\n")); +} + +void DumpCreditDistStates(HTC_TARGET *target) +{ + HTC_ENDPOINT_CREDIT_DIST *pEPList = target->EpCreditDistributionListHead; + + while (pEPList != NULL) { + DumpCreditDist(pEPList); + pEPList = pEPList->pNext; + } + + if (target->DistributeCredits != NULL) { + DO_DISTRIBUTION(target, + HTC_DUMP_CREDIT_STATE, + "Dump State", + NULL); + } +} + +/* flush all send packets from all endpoint queues */ +void HTCFlushSendPkts(HTC_TARGET *target) +{ + HTC_ENDPOINT *pEndpoint; + int i; + + DumpCreditDistStates(target); + + for (i = ENDPOINT_0; i < ENDPOINT_MAX; i++) { + pEndpoint = &target->EndPoint[i]; + if (pEndpoint->ServiceID == 0) { + /* not in use.. */ + continue; + } + HTCFlushEndpointTX(target,pEndpoint,HTC_TX_PACKET_TAG_ALL); + } + +} + +/* HTC API to flush an endpoint's TX queue*/ +void HTCFlushEndpoint(HTC_HANDLE HTCHandle, HTC_ENDPOINT_ID Endpoint, HTC_TX_TAG Tag) +{ + HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); + HTC_ENDPOINT *pEndpoint = &target->EndPoint[Endpoint]; + + if (pEndpoint->ServiceID == 0) { + AR_DEBUG_ASSERT(FALSE); + /* not in use.. */ + return; + } + + HTCFlushEndpointTX(target, pEndpoint, Tag); +} + +/* HTC API to indicate activity to the credit distribution function */ +void HTCIndicateActivityChange(HTC_HANDLE HTCHandle, + HTC_ENDPOINT_ID Endpoint, + A_BOOL Active) +{ + HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); + HTC_ENDPOINT *pEndpoint = &target->EndPoint[Endpoint]; + A_BOOL doDist = FALSE; + + if (pEndpoint->ServiceID == 0) { + AR_DEBUG_ASSERT(FALSE); + /* not in use.. */ + return; + } + + LOCK_HTC_TX(target); + + if (Active) { + if (!(pEndpoint->CreditDist.DistFlags & HTC_EP_ACTIVE)) { + /* mark active now */ + pEndpoint->CreditDist.DistFlags |= HTC_EP_ACTIVE; + doDist = TRUE; + } + } else { + if (pEndpoint->CreditDist.DistFlags & HTC_EP_ACTIVE) { + /* mark inactive now */ + pEndpoint->CreditDist.DistFlags &= ~HTC_EP_ACTIVE; + doDist = TRUE; + } + } + + if (doDist) { + /* do distribution again based on activity change + * note, this is done with the lock held */ + DO_DISTRIBUTION(target, + HTC_CREDIT_DIST_ACTIVITY_CHANGE, + "Activity Change", + target->EpCreditDistributionListHead->pNext); + } + + UNLOCK_HTC_TX(target); + +} diff --git a/drivers/ar6000/htc/htc_services.c b/drivers/ar6000/htc/htc_services.c new file mode 100644 index 00000000000..e5d50d16ddc --- /dev/null +++ b/drivers/ar6000/htc/htc_services.c @@ -0,0 +1,403 @@ +/* + * + * Copyright (c) 2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "htc_internal.h" + +void HTCControlTxComplete(void *Context, HTC_PACKET *pPacket) +{ + /* not implemented + * we do not send control TX frames during normal runtime, only during setup */ + AR_DEBUG_ASSERT(FALSE); +} + + /* callback when a control message arrives on this endpoint */ +void HTCControlRecv(void *Context, HTC_PACKET *pPacket) +{ + AR_DEBUG_ASSERT(pPacket->Endpoint == ENDPOINT_0); + + /* the only control messages we are expecting are NULL messages (credit resports), which should + * never get here */ + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + ("HTCControlRecv, got message with length:%d \n", + pPacket->ActualLength + HTC_HDR_LENGTH)); + + /* dump header and message */ + DebugDumpBytes(pPacket->pBuffer - HTC_HDR_LENGTH, + pPacket->ActualLength + HTC_HDR_LENGTH, + "Unexpected ENDPOINT 0 Message"); + + HTC_RECYCLE_RX_PKT((HTC_TARGET*)Context,pPacket); +} + +A_STATUS HTCSendSetupComplete(HTC_TARGET *target) +{ + HTC_PACKET *pSendPacket = NULL; + A_STATUS status; + HTC_SETUP_COMPLETE_MSG *pSetupComplete; + + do { + /* allocate a packet to send to the target */ + pSendPacket = HTC_ALLOC_CONTROL_TX(target); + + if (NULL == pSendPacket) { + status = A_NO_MEMORY; + break; + } + + /* assemble setup complete message */ + pSetupComplete = (HTC_SETUP_COMPLETE_MSG *)pSendPacket->pBuffer; + A_MEMZERO(pSetupComplete,sizeof(HTC_SETUP_COMPLETE_MSG)); + pSetupComplete->MessageID = HTC_MSG_SETUP_COMPLETE_ID; + + SET_HTC_PACKET_INFO_TX(pSendPacket, + NULL, + (A_UINT8 *)pSetupComplete, + sizeof(HTC_SETUP_COMPLETE_MSG), + ENDPOINT_0, + HTC_SERVICE_TX_PACKET_TAG); + + /* we want synchronous operation */ + pSendPacket->Completion = NULL; + /* send the message */ + status = HTCIssueSend(target,pSendPacket,0); + + } while (FALSE); + + if (pSendPacket != NULL) { + HTC_FREE_CONTROL_TX(target,pSendPacket); + } + + return status; +} + + +A_STATUS HTCConnectService(HTC_HANDLE HTCHandle, + HTC_SERVICE_CONNECT_REQ *pConnectReq, + HTC_SERVICE_CONNECT_RESP *pConnectResp) +{ + HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); + A_STATUS status = A_OK; + HTC_PACKET *pRecvPacket = NULL; + HTC_PACKET *pSendPacket = NULL; + HTC_CONNECT_SERVICE_RESPONSE_MSG *pResponseMsg; + HTC_CONNECT_SERVICE_MSG *pConnectMsg; + HTC_ENDPOINT_ID assignedEndpoint = ENDPOINT_MAX; + HTC_ENDPOINT *pEndpoint; + int maxMsgSize = 0; + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("+HTCConnectService, target:0x%X SvcID:0x%X \n", + (A_UINT32)target, pConnectReq->ServiceID)); + + do { + + AR_DEBUG_ASSERT(pConnectReq->ServiceID != 0); + + if (HTC_CTRL_RSVD_SVC == pConnectReq->ServiceID) { + /* special case for pseudo control service */ + assignedEndpoint = ENDPOINT_0; + maxMsgSize = HTC_MAX_CONTROL_MESSAGE_LENGTH; + } else { + /* allocate a packet to send to the target */ + pSendPacket = HTC_ALLOC_CONTROL_TX(target); + + if (NULL == pSendPacket) { + AR_DEBUG_ASSERT(FALSE); + status = A_NO_MEMORY; + break; + } + /* assemble connect service message */ + pConnectMsg = (HTC_CONNECT_SERVICE_MSG *)pSendPacket->pBuffer; + AR_DEBUG_ASSERT(pConnectMsg != NULL); + A_MEMZERO(pConnectMsg,sizeof(HTC_CONNECT_SERVICE_MSG)); + pConnectMsg->MessageID = HTC_MSG_CONNECT_SERVICE_ID; + pConnectMsg->ServiceID = pConnectReq->ServiceID; + pConnectMsg->ConnectionFlags = pConnectReq->ConnectionFlags; + /* check caller if it wants to transfer meta data */ + if ((pConnectReq->pMetaData != NULL) && + (pConnectReq->MetaDataLength <= HTC_SERVICE_META_DATA_MAX_LENGTH)) { + /* copy meta data into message buffer (after header ) */ + A_MEMCPY((A_UINT8 *)pConnectMsg + sizeof(HTC_CONNECT_SERVICE_MSG), + pConnectReq->pMetaData, + pConnectReq->MetaDataLength); + pConnectMsg->ServiceMetaLength = pConnectReq->MetaDataLength; + } + + SET_HTC_PACKET_INFO_TX(pSendPacket, + NULL, + (A_UINT8 *)pConnectMsg, + sizeof(HTC_CONNECT_SERVICE_MSG) + pConnectMsg->ServiceMetaLength, + ENDPOINT_0, + HTC_SERVICE_TX_PACKET_TAG); + + /* we want synchronous operation */ + pSendPacket->Completion = NULL; + + status = HTCIssueSend(target,pSendPacket,0); + + if (A_FAILED(status)) { + break; + } + + /* wait for response */ + status = HTCWaitforControlMessage(target, &pRecvPacket); + + if (A_FAILED(status)) { + break; + } + /* we controlled the buffer creation so it has to be properly aligned */ + pResponseMsg = (HTC_CONNECT_SERVICE_RESPONSE_MSG *)pRecvPacket->pBuffer; + + if ((pResponseMsg->MessageID != HTC_MSG_CONNECT_SERVICE_RESPONSE_ID) || + (pRecvPacket->ActualLength < sizeof(HTC_CONNECT_SERVICE_RESPONSE_MSG))) { + /* this message is not valid */ + AR_DEBUG_ASSERT(FALSE); + status = A_EPROTO; + break; + } + + pConnectResp->ConnectRespCode = pResponseMsg->Status; + /* check response status */ + if (pResponseMsg->Status != HTC_SERVICE_SUCCESS) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR, + (" Target failed service 0x%X connect request (status:%d)\n", + pResponseMsg->ServiceID, pResponseMsg->Status)); + status = A_EPROTO; + break; + } + + assignedEndpoint = pResponseMsg->EndpointID; + maxMsgSize = pResponseMsg->MaxMsgSize; + + if ((pConnectResp->pMetaData != NULL) && + (pResponseMsg->ServiceMetaLength > 0) && + (pResponseMsg->ServiceMetaLength <= HTC_SERVICE_META_DATA_MAX_LENGTH)) { + /* caller supplied a buffer and the target responded with data */ + int copyLength = min((int)pConnectResp->BufferLength, (int)pResponseMsg->ServiceMetaLength); + /* copy the meta data */ + A_MEMCPY(pConnectResp->pMetaData, + ((A_UINT8 *)pResponseMsg) + sizeof(HTC_CONNECT_SERVICE_RESPONSE_MSG), + copyLength); + pConnectResp->ActualLength = copyLength; + } + + } + + /* the rest of these are parameter checks so set the error status */ + status = A_EPROTO; + + if (assignedEndpoint >= ENDPOINT_MAX) { + AR_DEBUG_ASSERT(FALSE); + break; + } + + if (0 == maxMsgSize) { + AR_DEBUG_ASSERT(FALSE); + break; + } + + pEndpoint = &target->EndPoint[assignedEndpoint]; + + if (pEndpoint->ServiceID != 0) { + /* endpoint already in use! */ + AR_DEBUG_ASSERT(FALSE); + break; + } + + /* return assigned endpoint to caller */ + pConnectResp->Endpoint = assignedEndpoint; + pConnectResp->MaxMsgLength = maxMsgSize; + + /* setup the endpoint */ + pEndpoint->ServiceID = pConnectReq->ServiceID; /* this marks the endpoint in use */ + pEndpoint->MaxTxQueueDepth = pConnectReq->MaxSendQueueDepth; + pEndpoint->MaxMsgLength = maxMsgSize; + /* copy all the callbacks */ + pEndpoint->EpCallBacks = pConnectReq->EpCallbacks; + INIT_HTC_PACKET_QUEUE(&pEndpoint->RxBuffers); + INIT_HTC_PACKET_QUEUE(&pEndpoint->TxQueue); + /* set the credit distribution info for this endpoint, this information is + * passed back to the credit distribution callback function */ + pEndpoint->CreditDist.ServiceID = pConnectReq->ServiceID; + pEndpoint->CreditDist.pHTCReserved = pEndpoint; + pEndpoint->CreditDist.Endpoint = assignedEndpoint; + pEndpoint->CreditDist.TxCreditSize = target->TargetCreditSize; + pEndpoint->CreditDist.TxCreditsPerMaxMsg = maxMsgSize / target->TargetCreditSize; + + if (0 == pEndpoint->CreditDist.TxCreditsPerMaxMsg) { + pEndpoint->CreditDist.TxCreditsPerMaxMsg = 1; + } + + status = A_OK; + + } while (FALSE); + + if (pSendPacket != NULL) { + HTC_FREE_CONTROL_TX(target,pSendPacket); + } + + if (pRecvPacket != NULL) { + HTC_FREE_CONTROL_RX(target,pRecvPacket); + } + + AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("-HTCConnectService \n")); + + return status; +} + +static void AddToEndpointDistList(HTC_TARGET *target, HTC_ENDPOINT_CREDIT_DIST *pEpDist) +{ + HTC_ENDPOINT_CREDIT_DIST *pCurEntry,*pLastEntry; + + if (NULL == target->EpCreditDistributionListHead) { + target->EpCreditDistributionListHead = pEpDist; + pEpDist->pNext = NULL; + pEpDist->pPrev = NULL; + return; + } + + /* queue to the end of the list, this does not have to be very + * fast since this list is built at startup time */ + pCurEntry = target->EpCreditDistributionListHead; + + while (pCurEntry) { + pLastEntry = pCurEntry; + pCurEntry = pCurEntry->pNext; + } + + pLastEntry->pNext = pEpDist; + pEpDist->pPrev = pLastEntry; + pEpDist->pNext = NULL; +} + + + +/* default credit init callback */ +static void HTCDefaultCreditInit(void *Context, + HTC_ENDPOINT_CREDIT_DIST *pEPList, + int TotalCredits) +{ + HTC_ENDPOINT_CREDIT_DIST *pCurEpDist; + int totalEps = 0; + int creditsPerEndpoint; + + pCurEpDist = pEPList; + /* first run through the list and figure out how many endpoints we are dealing with */ + while (pCurEpDist != NULL) { + pCurEpDist = pCurEpDist->pNext; + totalEps++; + } + + /* even distribution */ + creditsPerEndpoint = TotalCredits/totalEps; + + pCurEpDist = pEPList; + /* run through the list and set minimum and normal credits and + * provide the endpoint with some credits to start */ + while (pCurEpDist != NULL) { + + if (creditsPerEndpoint < pCurEpDist->TxCreditsPerMaxMsg) { + /* too many endpoints and not enough credits */ + AR_DEBUG_ASSERT(FALSE); + break; + } + /* our minimum is set for at least 1 max message */ + pCurEpDist->TxCreditsMin = pCurEpDist->TxCreditsPerMaxMsg; + /* this value is ignored by our credit alg, since we do + * not dynamically adjust credits, this is the policy of + * the "default" credit distribution, something simple and easy */ + pCurEpDist->TxCreditsNorm = 0xFFFF; + /* give the endpoint minimum credits */ + pCurEpDist->TxCredits = creditsPerEndpoint; + pCurEpDist->TxCreditsAssigned = creditsPerEndpoint; + pCurEpDist = pCurEpDist->pNext; + } + +} + +/* default credit distribution callback, NOTE, this callback holds the TX lock */ +void HTCDefaultCreditDist(void *Context, + HTC_ENDPOINT_CREDIT_DIST *pEPDistList, + HTC_CREDIT_DIST_REASON Reason) +{ + HTC_ENDPOINT_CREDIT_DIST *pCurEpDist; + + if (Reason == HTC_CREDIT_DIST_SEND_COMPLETE) { + pCurEpDist = pEPDistList; + /* simple distribution */ + while (pCurEpDist != NULL) { + if (pCurEpDist->TxCreditsToDist > 0) { + /* just give the endpoint back the credits */ + pCurEpDist->TxCredits += pCurEpDist->TxCreditsToDist; + pCurEpDist->TxCreditsToDist = 0; + } + pCurEpDist = pCurEpDist->pNext; + } + } + + /* note we do not need to handle the other reason codes as this is a very + * simple distribution scheme, no need to seek for more credits or handle inactivity */ +} + +void HTCSetCreditDistribution(HTC_HANDLE HTCHandle, + void *pCreditDistContext, + HTC_CREDIT_DIST_CALLBACK CreditDistFunc, + HTC_CREDIT_INIT_CALLBACK CreditInitFunc, + HTC_SERVICE_ID ServicePriorityOrder[], + int ListLength) +{ + HTC_TARGET *target = GET_HTC_TARGET_FROM_HANDLE(HTCHandle); + int i; + int ep; + + if (CreditInitFunc != NULL) { + /* caller has supplied their own distribution functions */ + target->InitCredits = CreditInitFunc; + AR_DEBUG_ASSERT(CreditDistFunc != NULL); + target->DistributeCredits = CreditDistFunc; + target->pCredDistContext = pCreditDistContext; + } else { + /* caller wants HTC to do distribution */ + /* if caller wants service to handle distributions then + * it must set both of these to NULL! */ + AR_DEBUG_ASSERT(CreditDistFunc == NULL); + target->InitCredits = HTCDefaultCreditInit; + target->DistributeCredits = HTCDefaultCreditDist; + target->pCredDistContext = target; + } + + /* always add HTC control endpoint first, we only expose the list after the + * first one, this is added for TX queue checking */ + AddToEndpointDistList(target, &target->EndPoint[ENDPOINT_0].CreditDist); + + /* build the list of credit distribution structures in priority order + * supplied by the caller, these will follow endpoint 0 */ + for (i = 0; i < ListLength; i++) { + /* match services with endpoints and add the endpoints to the distribution list + * in FIFO order */ + for (ep = ENDPOINT_1; ep < ENDPOINT_MAX; ep++) { + if (target->EndPoint[ep].ServiceID == ServicePriorityOrder[i]) { + /* queue this one to the list */ + AddToEndpointDistList(target, &target->EndPoint[ep].CreditDist); + break; + } + } + AR_DEBUG_ASSERT(ep < ENDPOINT_MAX); + } + +} diff --git a/drivers/ar6000/include/AR6001_regdump.h b/drivers/ar6000/include/AR6001_regdump.h new file mode 100644 index 00000000000..c1bcadea372 --- /dev/null +++ b/drivers/ar6000/include/AR6001_regdump.h @@ -0,0 +1,100 @@ +/* + * Copyright (c) 2006 Atheros Communications Inc. + * All rights reserved. + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + */ + +#ifndef __AR6000_REGDUMP_H__ +#define __AR6000_REGDUMP_H__ + +#if !defined(__ASSEMBLER__) +/* + * Target CPU state at the time of failure is reflected + * in a register dump, which the Host can fetch through + * the diagnostic window. + */ + +struct MIPS_exception_frame_s { + A_UINT32 pc; /* Program Counter */ + A_UINT32 at; /* MIPS General Purpose registers */ + A_UINT32 v0; + A_UINT32 v1; + A_UINT32 a0; + A_UINT32 a1; + A_UINT32 a2; + A_UINT32 a3; + A_UINT32 t0; + A_UINT32 t1; + A_UINT32 t2; + A_UINT32 t3; + A_UINT32 t4; + A_UINT32 t5; + A_UINT32 t6; + A_UINT32 t7; + A_UINT32 s0; + A_UINT32 s1; + A_UINT32 s2; + A_UINT32 s3; + A_UINT32 s4; + A_UINT32 s5; + A_UINT32 s6; + A_UINT32 s7; + A_UINT32 t8; + A_UINT32 t9; + A_UINT32 k0; + A_UINT32 k1; + A_UINT32 gp; + A_UINT32 sp; + A_UINT32 s8; + A_UINT32 ra; + A_UINT32 cause; /* Selected coprocessor regs */ + A_UINT32 status; +}; +typedef struct MIPS_exception_frame_s CPU_exception_frame_t; + +#endif + +/* + * Offsets into MIPS_exception_frame structure, for use in assembler code + * MUST MATCH C STRUCTURE ABOVE + */ +#define RD_pc 0 +#define RD_at 1 +#define RD_v0 2 +#define RD_v1 3 +#define RD_a0 4 +#define RD_a1 5 +#define RD_a2 6 +#define RD_a3 7 +#define RD_t0 8 +#define RD_t1 9 +#define RD_t2 10 +#define RD_t3 11 +#define RD_t4 12 +#define RD_t5 13 +#define RD_t6 14 +#define RD_t7 15 +#define RD_s0 16 +#define RD_s1 17 +#define RD_s2 18 +#define RD_s3 19 +#define RD_s4 20 +#define RD_s5 21 +#define RD_s6 22 +#define RD_s7 23 +#define RD_t8 24 +#define RD_t9 25 +#define RD_k0 26 +#define RD_k1 27 +#define RD_gp 28 +#define RD_sp 29 +#define RD_s8 30 +#define RD_ra 31 +#define RD_cause 32 +#define RD_status 33 + +#define RD_SIZE (34*4) /* Space for this number of words */ + +#endif /* __AR6000_REGDUMP_H__ */ diff --git a/drivers/ar6000/include/AR6K_version.h b/drivers/ar6000/include/AR6K_version.h new file mode 100644 index 00000000000..d5b2a20b043 --- /dev/null +++ b/drivers/ar6000/include/AR6K_version.h @@ -0,0 +1,36 @@ +#define __VER_MAJOR_ 2 +#define __VER_MINOR_ 0 +#define __VER_PATCH_ 0 + + +/* + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + * The makear6ksdk script (used for release builds) modifies the following line. + */ +#define __BUILD_NUMBER_ 18 + + +/* Format of the version number. */ +#define VER_MAJOR_BIT_OFFSET 28 +#define VER_MINOR_BIT_OFFSET 24 +#define VER_PATCH_BIT_OFFSET 16 +#define VER_BUILD_NUM_BIT_OFFSET 0 + + +/* + * The version has the following format: + * Bits 28-31: Major version + * Bits 24-27: Minor version + * Bits 16-23: Patch version + * Bits 0-15: Build number (automatically generated during build process ) + * E.g. Build 1.1.3.7 would be represented as 0x11030007. + * + * DO NOT split the following macro into multiple lines as this may confuse the build scripts. + */ +#define AR6K_SW_VERSION ( ( __VER_MAJOR_ << VER_MAJOR_BIT_OFFSET ) + ( __VER_MINOR_ << VER_MINOR_BIT_OFFSET ) + ( __VER_PATCH_ << VER_PATCH_BIT_OFFSET ) + ( __BUILD_NUMBER_ << VER_BUILD_NUM_BIT_OFFSET ) ) + + diff --git a/drivers/ar6000/include/AR6K_version.h.NEW b/drivers/ar6000/include/AR6K_version.h.NEW new file mode 100644 index 00000000000..d5b2a20b043 --- /dev/null +++ b/drivers/ar6000/include/AR6K_version.h.NEW @@ -0,0 +1,36 @@ +#define __VER_MAJOR_ 2 +#define __VER_MINOR_ 0 +#define __VER_PATCH_ 0 + + +/* + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + * The makear6ksdk script (used for release builds) modifies the following line. + */ +#define __BUILD_NUMBER_ 18 + + +/* Format of the version number. */ +#define VER_MAJOR_BIT_OFFSET 28 +#define VER_MINOR_BIT_OFFSET 24 +#define VER_PATCH_BIT_OFFSET 16 +#define VER_BUILD_NUM_BIT_OFFSET 0 + + +/* + * The version has the following format: + * Bits 28-31: Major version + * Bits 24-27: Minor version + * Bits 16-23: Patch version + * Bits 0-15: Build number (automatically generated during build process ) + * E.g. Build 1.1.3.7 would be represented as 0x11030007. + * + * DO NOT split the following macro into multiple lines as this may confuse the build scripts. + */ +#define AR6K_SW_VERSION ( ( __VER_MAJOR_ << VER_MAJOR_BIT_OFFSET ) + ( __VER_MINOR_ << VER_MINOR_BIT_OFFSET ) + ( __VER_PATCH_ << VER_PATCH_BIT_OFFSET ) + ( __BUILD_NUMBER_ << VER_BUILD_NUM_BIT_OFFSET ) ) + + diff --git a/drivers/ar6000/include/AR6Khwreg.h b/drivers/ar6000/include/AR6Khwreg.h new file mode 100644 index 00000000000..ecfdf20a0f0 --- /dev/null +++ b/drivers/ar6000/include/AR6Khwreg.h @@ -0,0 +1,147 @@ +/* + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + * This file contains the definitions for AR6001 registers + * that may be directly manipulated by Host software. + */ + +#ifndef __AR6KHWREG_H__ +#define __AR6KHWREG_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Host registers */ +#define HOST_INT_STATUS_ADDRESS 0x00000400 +#define CPU_INT_STATUS_ADDRESS 0x00000401 +#define ERROR_INT_STATUS_ADDRESS 0x00000402 +#define INT_STATUS_ENABLE_ADDRESS 0x00000418 +#define CPU_INT_STATUS_ENABLE_ADDRESS 0x00000419 +#define COUNT_ADDRESS 0x00000420 +#define COUNT_DEC_ADDRESS 0x00000440 +#define WINDOW_DATA_ADDRESS 0x00000474 +#define WINDOW_WRITE_ADDR_ADDRESS 0x00000478 +#define WINDOW_READ_ADDR_ADDRESS 0x0000047c + +/* Target addresses */ +#define RESET_CONTROL_ADDRESS 0x0c000000 +#define MC_REMAP_VALID_ADDRESS 0x0c004080 +#define MC_REMAP_SIZE_ADDRESS 0x0c004100 +#define MC_REMAP_COMPARE_ADDRESS 0x0c004180 +#define MC_REMAP_TARGET_ADDRESS 0x0c004200 +#define LOCAL_COUNT_ADDRESS 0x0c014080 +#define LOCAL_SCRATCH_ADDRESS 0x0c0140c0 + + +#define INT_STATUS_ENABLE_ERROR_MSB 7 +#define INT_STATUS_ENABLE_ERROR_LSB 7 +#define INT_STATUS_ENABLE_ERROR_MASK 0x00000080 +#define INT_STATUS_ENABLE_ERROR_GET(x) (((x) & INT_STATUS_ENABLE_ERROR_MASK) >> INT_STATUS_ENABLE_ERROR_LSB) +#define INT_STATUS_ENABLE_ERROR_SET(x) (((x) << INT_STATUS_ENABLE_ERROR_LSB) & INT_STATUS_ENABLE_ERROR_MASK) + +#define INT_STATUS_ENABLE_CPU_MSB 6 +#define INT_STATUS_ENABLE_CPU_LSB 6 +#define INT_STATUS_ENABLE_CPU_MASK 0x00000040 +#define INT_STATUS_ENABLE_CPU_GET(x) (((x) & INT_STATUS_ENABLE_CPU_MASK) >> INT_STATUS_ENABLE_CPU_LSB) +#define INT_STATUS_ENABLE_CPU_SET(x) (((x) << INT_STATUS_ENABLE_CPU_LSB) & INT_STATUS_ENABLE_CPU_MASK) + +#define INT_STATUS_ENABLE_COUNTER_MSB 4 +#define INT_STATUS_ENABLE_COUNTER_LSB 4 +#define INT_STATUS_ENABLE_COUNTER_MASK 0x00000010 +#define INT_STATUS_ENABLE_COUNTER_GET(x) (((x) & INT_STATUS_ENABLE_COUNTER_MASK) >> INT_STATUS_ENABLE_COUNTER_LSB) +#define INT_STATUS_ENABLE_COUNTER_SET(x) (((x) << INT_STATUS_ENABLE_COUNTER_LSB) & INT_STATUS_ENABLE_COUNTER_MASK) + +#define INT_STATUS_ENABLE_MBOX_DATA_MSB 3 +#define INT_STATUS_ENABLE_MBOX_DATA_LSB 0 +#define INT_STATUS_ENABLE_MBOX_DATA_MASK 0x0000000f +#define INT_STATUS_ENABLE_MBOX_DATA_GET(x) (((x) & INT_STATUS_ENABLE_MBOX_DATA_MASK) >> INT_STATUS_ENABLE_MBOX_DATA_LSB) +#define INT_STATUS_ENABLE_MBOX_DATA_SET(x) (((x) << INT_STATUS_ENABLE_MBOX_DATA_LSB) & INT_STATUS_ENABLE_MBOX_DATA_MASK) + +#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MSB 1 +#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB 1 +#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK 0x00000002 +#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_GET(x) (((x) & ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK) >> ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB) +#define ERROR_STATUS_ENABLE_RX_UNDERFLOW_SET(x) (((x) << ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB) & ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK) + +#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MSB 0 +#define ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB 0 +#define ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK 0x00000001 +#define ERROR_STATUS_ENABLE_TX_OVERFLOW_GET(x) (((x) & ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK) >> ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB) +#define ERROR_STATUS_ENABLE_TX_OVERFLOW_SET(x) (((x) << ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB) & ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK) + + +#define CPU_INT_STATUS_ENABLE_BIT_MSB 7 +#define CPU_INT_STATUS_ENABLE_BIT_LSB 0 +#define CPU_INT_STATUS_ENABLE_BIT_MASK 0x000000ff +#define CPU_INT_STATUS_ENABLE_BIT_GET(x) (((x) & CPU_INT_STATUS_ENABLE_BIT_MASK) >> CPU_INT_STATUS_ENABLE_BIT_LSB) +#define CPU_INT_STATUS_ENABLE_BIT_SET(x) (((x) << CPU_INT_STATUS_ENABLE_BIT_LSB) & CPU_INT_STATUS_ENABLE_BIT_MASK) + +#define COUNTER_INT_STATUS_ENABLE_BIT_MSB 7 +#define COUNTER_INT_STATUS_ENABLE_BIT_LSB 0 +#define COUNTER_INT_STATUS_ENABLE_BIT_MASK 0x000000ff +#define COUNTER_INT_STATUS_ENABLE_BIT_GET(x) (((x) & COUNTER_INT_STATUS_ENABLE_BIT_MASK) >> COUNTER_INT_STATUS_ENABLE_BIT_LSB) +#define COUNTER_INT_STATUS_ENABLE_BIT_SET(x) (((x) << COUNTER_INT_STATUS_ENABLE_BIT_LSB) & COUNTER_INT_STATUS_ENABLE_BIT_MASK) + +#define ERROR_INT_STATUS_WAKEUP_MSB 2 +#define ERROR_INT_STATUS_WAKEUP_LSB 2 +#define ERROR_INT_STATUS_WAKEUP_MASK 0x00000004 +#define ERROR_INT_STATUS_WAKEUP_GET(x) (((x) & ERROR_INT_STATUS_WAKEUP_MASK) >> ERROR_INT_STATUS_WAKEUP_LSB) +#define ERROR_INT_STATUS_WAKEUP_SET(x) (((x) << ERROR_INT_STATUS_WAKEUP_LSB) & ERROR_INT_STATUS_WAKEUP_MASK) + +#define ERROR_INT_STATUS_RX_UNDERFLOW_MSB 1 +#define ERROR_INT_STATUS_RX_UNDERFLOW_LSB 1 +#define ERROR_INT_STATUS_RX_UNDERFLOW_MASK 0x00000002 +#define ERROR_INT_STATUS_RX_UNDERFLOW_GET(x) (((x) & ERROR_INT_STATUS_RX_UNDERFLOW_MASK) >> ERROR_INT_STATUS_RX_UNDERFLOW_LSB) +#define ERROR_INT_STATUS_RX_UNDERFLOW_SET(x) (((x) << ERROR_INT_STATUS_RX_UNDERFLOW_LSB) & ERROR_INT_STATUS_RX_UNDERFLOW_MASK) + +#define ERROR_INT_STATUS_TX_OVERFLOW_MSB 0 +#define ERROR_INT_STATUS_TX_OVERFLOW_LSB 0 +#define ERROR_INT_STATUS_TX_OVERFLOW_MASK 0x00000001 +#define ERROR_INT_STATUS_TX_OVERFLOW_GET(x) (((x) & ERROR_INT_STATUS_TX_OVERFLOW_MASK) >> ERROR_INT_STATUS_TX_OVERFLOW_LSB) +#define ERROR_INT_STATUS_TX_OVERFLOW_SET(x) (((x) << ERROR_INT_STATUS_TX_OVERFLOW_LSB) & ERROR_INT_STATUS_TX_OVERFLOW_MASK) + +#define HOST_INT_STATUS_ERROR_MSB 7 +#define HOST_INT_STATUS_ERROR_LSB 7 +#define HOST_INT_STATUS_ERROR_MASK 0x00000080 +#define HOST_INT_STATUS_ERROR_GET(x) (((x) & HOST_INT_STATUS_ERROR_MASK) >> HOST_INT_STATUS_ERROR_LSB) +#define HOST_INT_STATUS_ERROR_SET(x) (((x) << HOST_INT_STATUS_ERROR_LSB) & HOST_INT_STATUS_ERROR_MASK) + +#define HOST_INT_STATUS_CPU_MSB 6 +#define HOST_INT_STATUS_CPU_LSB 6 +#define HOST_INT_STATUS_CPU_MASK 0x00000040 +#define HOST_INT_STATUS_CPU_GET(x) (((x) & HOST_INT_STATUS_CPU_MASK) >> HOST_INT_STATUS_CPU_LSB) +#define HOST_INT_STATUS_CPU_SET(x) (((x) << HOST_INT_STATUS_CPU_LSB) & HOST_INT_STATUS_CPU_MASK) + +#define HOST_INT_STATUS_COUNTER_MSB 4 +#define HOST_INT_STATUS_COUNTER_LSB 4 +#define HOST_INT_STATUS_COUNTER_MASK 0x00000010 +#define HOST_INT_STATUS_COUNTER_GET(x) (((x) & HOST_INT_STATUS_COUNTER_MASK) >> HOST_INT_STATUS_COUNTER_LSB) +#define HOST_INT_STATUS_COUNTER_SET(x) (((x) << HOST_INT_STATUS_COUNTER_LSB) & HOST_INT_STATUS_COUNTER_MASK) + +#define RESET_CONTROL_WARM_RST_MSB 7 +#define RESET_CONTROL_WARM_RST_LSB 7 +#define RESET_CONTROL_WARM_RST_MASK 0x00000080 +#define RESET_CONTROL_WARM_RST_GET(x) (((x) & RESET_CONTROL_WARM_RST_MASK) >> RESET_CONTROL_WARM_RST_LSB) +#define RESET_CONTROL_WARM_RST_SET(x) (((x) << RESET_CONTROL_WARM_RST_LSB) & RESET_CONTROL_WARM_RST_MASK) + +#define RESET_CONTROL_COLD_RST_MSB 8 +#define RESET_CONTROL_COLD_RST_LSB 8 +#define RESET_CONTROL_COLD_RST_MASK 0x00000100 +#define RESET_CONTROL_COLD_RST_GET(x) (((x) & RESET_CONTROL_COLD_RST_MASK) >> RESET_CONTROL_COLD_RST_LSB) +#define RESET_CONTROL_COLD_RST_SET(x) (((x) << RESET_CONTROL_COLD_RST_LSB) & RESET_CONTROL_COLD_RST_MASK) + +#define RESET_CAUSE_LAST_MSB 2 +#define RESET_CAUSE_LAST_LSB 0 +#define RESET_CAUSE_LAST_MASK 0x00000007 +#define RESET_CAUSE_LAST_GET(x) (((x) & RESET_CAUSE_LAST_MASK) >> RESET_CAUSE_LAST_LSB) +#define RESET_CAUSE_LAST_SET(x) (((x) << RESET_CAUSE_LAST_LSB) & RESET_CAUSE_LAST_MASK) + +#ifdef __cplusplus +} +#endif + +#endif /* __AR6KHWREG_H__ */ diff --git a/drivers/ar6000/include/a_config.h b/drivers/ar6000/include/a_config.h new file mode 100644 index 00000000000..627b2984d30 --- /dev/null +++ b/drivers/ar6000/include/a_config.h @@ -0,0 +1,27 @@ +#ifndef _A_CONFIG_H_ +#define _A_CONFIG_H_ +/* + * Copyright (c) 2004-2005 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +/* + * This file contains software configuration options that enables + * specific software "features" + */ +#include "../ar6000/config_linux.h" + +#endif diff --git a/drivers/ar6000/include/a_debug.h b/drivers/ar6000/include/a_debug.h new file mode 100644 index 00000000000..4b0b35155b0 --- /dev/null +++ b/drivers/ar6000/include/a_debug.h @@ -0,0 +1,41 @@ +#ifndef _A_DEBUG_H_ +#define _A_DEBUG_H_ +/* + * Copyright (c) 2004-2006 Atheros Communications Inc. + * All rights reserved. + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include <a_types.h> +#include <a_osapi.h> + +#define DBG_INFO 0x00000001 +#define DBG_ERROR 0x00000002 +#define DBG_WARNING 0x00000004 +#define DBG_SDIO 0x00000008 +#define DBG_HIF 0x00000010 +#define DBG_HTC 0x00000020 +#define DBG_WMI 0x00000040 +#define DBG_WMI2 0x00000080 +#define DBG_DRIVER 0x00000100 + +#define DBG_DEFAULTS (DBG_ERROR|DBG_WARNING) + +#include "../ar6000/debug_linux.h" + +#endif diff --git a/drivers/ar6000/include/a_drv.h b/drivers/ar6000/include/a_drv.h new file mode 100644 index 00000000000..07e52d1792e --- /dev/null +++ b/drivers/ar6000/include/a_drv.h @@ -0,0 +1,28 @@ +#ifndef _A_DRV_H_ +#define _A_DRV_H_ +/* + * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_drv.h#1 $ + * + * This file contains the definitions of the basic atheros data types. + * It is used to map the data types in atheros files to a platform specific + * type. + * + * Copyright 2003-2005 Atheros Communications, Inc., All Rights Reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "../ar6000/athdrv_linux.h" + +#endif /* _ADRV_H_ */ diff --git a/drivers/ar6000/include/a_drv_api.h b/drivers/ar6000/include/a_drv_api.h new file mode 100644 index 00000000000..75317260cfb --- /dev/null +++ b/drivers/ar6000/include/a_drv_api.h @@ -0,0 +1,185 @@ +#ifndef _A_DRV_API_H_ +#define _A_DRV_API_H_ +/* + * Copyright (c) 2004-2006 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifdef __cplusplus +extern "C" { +#endif + +/****************************************************************************/ +/****************************************************************************/ +/** **/ +/** WMI related hooks **/ +/** **/ +/****************************************************************************/ +/****************************************************************************/ + +#include <ar6000_api.h> + +#define A_WMI_CHANNELLIST_RX(devt, numChan, chanList) \ + ar6000_channelList_rx((devt), (numChan), (chanList)) + +#define A_WMI_SET_NUMDATAENDPTS(devt, num) \ + ar6000_set_numdataendpts((devt), (num)) + +#define A_WMI_CONTROL_TX(devt, osbuf, streamID) \ + ar6000_control_tx((devt), (osbuf), (streamID)) + +#define A_WMI_TARGETSTATS_EVENT(devt, pStats) \ + ar6000_targetStats_event((devt), (pStats)) + +#define A_WMI_SCANCOMPLETE_EVENT(devt, status) \ + ar6000_scanComplete_event((devt), (status)) + +#ifdef CONFIG_HOST_DSET_SUPPORT + +#define A_WMI_DSET_DATA_REQ(devt, access_cookie, offset, length, targ_buf, targ_reply_fn, targ_reply_arg) \ + ar6000_dset_data_req((devt), (access_cookie), (offset), (length), (targ_buf), (targ_reply_fn), (targ_reply_arg)) + +#define A_WMI_DSET_CLOSE(devt, access_cookie) \ + ar6000_dset_close((devt), (access_cookie)) + +#endif + +#define A_WMI_DSET_OPEN_REQ(devt, id, targ_handle, targ_reply_fn, targ_reply_arg) \ + ar6000_dset_open_req((devt), (id), (targ_handle), (targ_reply_fn), (targ_reply_arg)) + +#define A_WMI_CONNECT_EVENT(devt, channel, bssid, listenInterval, beaconInterval, networkType, beaconIeLen, assocReqLen, assocRespLen, assocInfo) \ + ar6000_connect_event((devt), (channel), (bssid), (listenInterval), (beaconInterval), (networkType), (beaconIeLen), (assocReqLen), (assocRespLen), (assocInfo)) + +#define A_WMI_REGDOMAIN_EVENT(devt, regCode) \ + ar6000_regDomain_event((devt), (regCode)) + +#define A_WMI_NEIGHBORREPORT_EVENT(devt, numAps, info) \ + ar6000_neighborReport_event((devt), (numAps), (info)) + +#define A_WMI_DISCONNECT_EVENT(devt, reason, bssid, assocRespLen, assocInfo, protocolReasonStatus) \ + ar6000_disconnect_event((devt), (reason), (bssid), (assocRespLen), (assocInfo), (protocolReasonStatus)) + +#define A_WMI_TKIP_MICERR_EVENT(devt, keyid, ismcast) \ + ar6000_tkip_micerr_event((devt), (keyid), (ismcast)) + +#define A_WMI_BITRATE_RX(devt, rateKbps) \ + ar6000_bitrate_rx((devt), (rateKbps)) + +#define A_WMI_TXPWR_RX(devt, txPwr) \ + ar6000_txPwr_rx((devt), (txPwr)) + +#define A_WMI_READY_EVENT(devt, datap, phyCap) \ + ar6000_ready_event((devt), (datap), (phyCap)) + +#define A_WMI_DBGLOG_INIT_DONE(ar) \ + ar6000_dbglog_init_done(ar); + +#define A_WMI_RSSI_THRESHOLD_EVENT(devt, newThreshold, rssi) \ + ar6000_rssiThreshold_event((devt), (newThreshold), (rssi)) + +#define A_WMI_REPORT_ERROR_EVENT(devt, errorVal) \ + ar6000_reportError_event((devt), (errorVal)) + +#define A_WMI_ROAM_TABLE_EVENT(devt, pTbl) \ + ar6000_roam_tbl_event((devt), (pTbl)) + +#define A_WMI_ROAM_DATA_EVENT(devt, p) \ + ar6000_roam_data_event((devt), (p)) + +#define A_WMI_WOW_LIST_EVENT(devt, num_filters, wow_filters) \ + ar6000_wow_list_event((devt), (num_filters), (wow_filters)) + +#define A_WMI_CAC_EVENT(devt, ac, cac_indication, statusCode, tspecSuggestion) \ + ar6000_cac_event((devt), (ac), (cac_indication), (statusCode), (tspecSuggestion)) + +#define A_WMI_IPTOS_TO_USERPRIORITY(pkt) \ + ar6000_iptos_to_userPriority((pkt)) + +#define A_WMI_PMKID_LIST_EVENT(devt, num_pmkid, pmkid_list) \ + ar6000_pmkid_list_event((devt), (num_pmkid), (pmkid_list)) + +#ifdef CONFIG_HOST_GPIO_SUPPORT + +#define A_WMI_GPIO_INTR_RX(intr_mask, input_values) \ + ar6000_gpio_intr_rx((intr_mask), (input_values)) + +#define A_WMI_GPIO_DATA_RX(reg_id, value) \ + ar6000_gpio_data_rx((reg_id), (value)) + +#define A_WMI_GPIO_ACK_RX() \ + ar6000_gpio_ack_rx() + +#endif + +#ifdef SEND_EVENT_TO_APP + +#define A_WMI_SEND_EVENT_TO_APP(ar, eventId, datap, len) \ + ar6000_send_event_to_app((ar), (eventId), (datap), (len)) + +#else + +#define A_WMI_SEND_EVENT_TO_APP(ar, eventId, datap, len) + +#endif + +#ifdef CONFIG_HOST_TCMD_SUPPORT +#define A_WMI_TCMD_RX_REPORT_EVENT(devt, results, len) \ + ar6000_tcmd_rx_report_event((devt), (results), (len)) +#endif + +#define A_WMI_HBCHALLENGERESP_EVENT(devt, cookie, source) \ + ar6000_hbChallengeResp_event((devt), (cookie), (source)) + +#define A_WMI_TX_RETRY_ERR_EVENT(devt) \ + ar6000_tx_retry_err_event((devt)) + +#define A_WMI_SNR_THRESHOLD_EVENT_RX(devt, newThreshold, snr) \ + ar6000_snrThresholdEvent_rx((devt), (newThreshold), (snr)) + +#define A_WMI_LQ_THRESHOLD_EVENT_RX(devt, range, lqVal) \ + ar6000_lqThresholdEvent_rx((devt), (range), (lqVal)) + +#define A_WMI_RATEMASK_RX(devt, ratemask) \ + ar6000_ratemask_rx((devt), (ratemask)) + +#define A_WMI_KEEPALIVE_RX(devt, configured) \ + ar6000_keepalive_rx((devt), (configured)) + +#define A_WMI_BSSINFO_EVENT_RX(ar, datp, len) \ + ar6000_bssInfo_event_rx((ar), (datap), (len)) + +#define A_WMI_DBGLOG_EVENT(ar, dropped, buffer, length) \ + ar6000_dbglog_event((ar), (dropped), (buffer), (length)); + +#define A_WMI_STREAM_TX_ACTIVE(devt,trafficClass) \ + ar6000_indicate_tx_activity((devt),(trafficClass), TRUE) + +#define A_WMI_STREAM_TX_INACTIVE(devt,trafficClass) \ + ar6000_indicate_tx_activity((devt),(trafficClass), FALSE) + +/****************************************************************************/ +/****************************************************************************/ +/** **/ +/** HTC related hooks **/ +/** **/ +/****************************************************************************/ +/****************************************************************************/ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/drivers/ar6000/include/a_osapi.h b/drivers/ar6000/include/a_osapi.h new file mode 100644 index 00000000000..7d6086712f7 --- /dev/null +++ b/drivers/ar6000/include/a_osapi.h @@ -0,0 +1,28 @@ +#ifndef _A_OSAPI_H_ +#define _A_OSAPI_H_ +/* + * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_osapi.h#1 $ + * + * This file contains the definitions of the basic atheros data types. + * It is used to map the data types in atheros files to a platform specific + * type. + * + * Copyright 2003-2005 Atheros Communications, Inc., All Rights Reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "../ar6000/osapi_linux.h" + +#endif /* _OSAPI_H_ */ diff --git a/drivers/ar6000/include/a_types.h b/drivers/ar6000/include/a_types.h new file mode 100644 index 00000000000..e2ed090767b --- /dev/null +++ b/drivers/ar6000/include/a_types.h @@ -0,0 +1,28 @@ +#ifndef _A_TYPES_H_ +#define _A_TYPES_H_ +/* + * $Id: //depot/sw/releases/olca2.0-GPL/host/include/a_types.h#1 $ + * + * This file contains the definitions of the basic atheros data types. + * It is used to map the data types in atheros files to a platform specific + * type. + * + * Copyright 2003-2005 Atheros Communications, Inc., All Rights Reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "../ar6000/athtypes_linux.h" + +#endif /* _ATHTYPES_H_ */ diff --git a/drivers/ar6000/include/ar6000_api.h b/drivers/ar6000/include/ar6000_api.h new file mode 100644 index 00000000000..abe5de79a52 --- /dev/null +++ b/drivers/ar6000/include/ar6000_api.h @@ -0,0 +1,29 @@ +#ifndef _AR6000_API_H_ +#define _AR6000_API_H_ +/* + * Copyright (c) 2004-2005 Atheros Communications Inc. + * All rights reserved. + * + * This file contains the API to access the OS dependent atheros host driver + * by the WMI or WLAN generic modules. + * + * $Id: //depot/sw/releases/olca2.0-GPL/host/include/ar6000_api.h#1 $ + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "../ar6000/ar6xapi_linux.h" + +#endif /* _AR6000_API_H */ + diff --git a/drivers/ar6000/include/ar6000_diag.h b/drivers/ar6000/include/ar6000_diag.h new file mode 100644 index 00000000000..2df131df205 --- /dev/null +++ b/drivers/ar6000/include/ar6000_diag.h @@ -0,0 +1,38 @@ +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifndef AR6000_DIAG_H_ +#define AR6000_DIAG_H_ + + +A_STATUS +ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data); + +A_STATUS +ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data); + +A_STATUS +ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address, + A_UCHAR *data, A_UINT32 length); + +A_STATUS +ar6000_WriteDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address, + A_UCHAR *data, A_UINT32 length); + +#endif /*AR6000_DIAG_H_*/ diff --git a/drivers/ar6000/include/athdefs.h b/drivers/ar6000/include/athdefs.h new file mode 100644 index 00000000000..c28c871c599 --- /dev/null +++ b/drivers/ar6000/include/athdefs.h @@ -0,0 +1,85 @@ +#ifndef __ATHDEFS_H__ +#define __ATHDEFS_H__ + +/* + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + * This file contains definitions that may be used across both + * Host and Target software. Nothing here is module-dependent + * or platform-dependent. + */ + +/* + * Generic error codes that can be used by hw, sta, ap, sim, dk + * and any other environments. Since these are enums, feel free to + * add any more codes that you need. + */ + +typedef enum { + A_ERROR = -1, /* Generic error return */ + A_OK = 0, /* success */ + /* Following values start at 1 */ + A_DEVICE_NOT_FOUND, /* not able to find PCI device */ + A_NO_MEMORY, /* not able to allocate memory, not available */ + A_MEMORY_NOT_AVAIL, /* memory region is not free for mapping */ + A_NO_FREE_DESC, /* no free descriptors available */ + A_BAD_ADDRESS, /* address does not match descriptor */ + A_WIN_DRIVER_ERROR, /* used in NT_HW version, if problem at init */ + A_REGS_NOT_MAPPED, /* registers not correctly mapped */ + A_EPERM, /* Not superuser */ + A_EACCES, /* Access denied */ + A_ENOENT, /* No such entry, search failed, etc. */ + A_EEXIST, /* The object already exists (can't create) */ + A_EFAULT, /* Bad address fault */ + A_EBUSY, /* Object is busy */ + A_EINVAL, /* Invalid parameter */ + A_EMSGSIZE, /* Inappropriate message buffer length */ + A_ECANCELED, /* Operation canceled */ + A_ENOTSUP, /* Operation not supported */ + A_ECOMM, /* Communication error on send */ + A_EPROTO, /* Protocol error */ + A_ENODEV, /* No such device */ + A_EDEVNOTUP, /* device is not UP */ + A_NO_RESOURCE, /* No resources for requested operation */ + A_HARDWARE, /* Hardware failure */ + A_PENDING, /* Asynchronous routine; will send up results la +ter (typically in callback) */ + A_EBADCHANNEL, /* The channel cannot be used */ + A_DECRYPT_ERROR, /* Decryption error */ + A_PHY_ERROR, /* RX PHY error */ + A_CONSUMED /* Object was consumed */ +} A_STATUS; + +#define A_SUCCESS(x) (x == A_OK) +#define A_FAILED(x) (!A_SUCCESS(x)) + +#ifndef TRUE +#define TRUE 1 +#endif + +#ifndef FALSE +#define FALSE 0 +#endif + +/* + * The following definition is WLAN specific definition + */ +typedef enum { + MODE_11A = 0, /* 11a Mode */ + MODE_11G = 1, /* 11g + 11b Mode */ + MODE_11B = 2, /* 11b Mode */ + MODE_11GONLY = 3, /* 11g only Mode */ + MODE_UNKNOWN = 4, + MODE_MAX = 4 +} WLAN_PHY_MODE; + +typedef enum { + WLAN_11A_CAPABILITY = 1, + WLAN_11G_CAPABILITY = 2, + WLAN_11AG_CAPABILITY = 3, +}WLAN_CAPABILITY; + +#endif /* __ATHDEFS_H__ */ diff --git a/drivers/ar6000/include/athdrv.h b/drivers/ar6000/include/athdrv.h new file mode 100644 index 00000000000..19da97e4bbd --- /dev/null +++ b/drivers/ar6000/include/athdrv.h @@ -0,0 +1,32 @@ +/* + * Copyright (c) 2004-2006 Atheros Communications Inc. + * All rights reserved. + * + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifndef _ATHDRV_H_ +#define _ATHDRV_H_ + +#ifdef __cplusplus +extern "C" { +#endif + + +#ifdef __cplusplus +} +#endif + +#endif /* _ATHDRV_H_ */ diff --git a/drivers/ar6000/include/athendpack.h b/drivers/ar6000/include/athendpack.h new file mode 100644 index 00000000000..42921ae7f73 --- /dev/null +++ b/drivers/ar6000/include/athendpack.h @@ -0,0 +1,41 @@ +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + * @file: athendpack.h + * + * @abstract: end compiler-specific structure packing + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ +#ifdef VXWORKS +#endif /* VXWORKS */ + +#ifdef LINUX +#endif /* LINUX */ + +#ifdef QNX +#endif /* QNX */ + +#ifdef INTEGRITY +#include "integrity/athendpack_integrity.h" +#endif /* INTEGRITY */ + +#ifdef NUCLEUS +#endif /* NUCLEUS */ + +#ifdef UNDER_CE +#include "../os/wince/include/athendpack_wince.h" +#endif /* WINCE */ + diff --git a/drivers/ar6000/include/athstartpack.h b/drivers/ar6000/include/athstartpack.h new file mode 100644 index 00000000000..6632cc2cb50 --- /dev/null +++ b/drivers/ar6000/include/athstartpack.h @@ -0,0 +1,42 @@ +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + * @file: athstartpack.h + * + * @abstract: start compiler-specific structure packing + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifdef VXWORKS +#endif /* VXWORKS */ + +#ifdef LINUX +#endif /* LINUX */ + +#ifdef QNX +#endif /* QNX */ + +#ifdef INTEGRITY +#include "integrity/athstartpack_integrity.h" +#endif /* INTEGRITY */ + +#ifdef NUCLEUS +#endif /* NUCLEUS */ + +#ifdef UNDER_CE +#include "../os/wince/include/athstartpack_wince.h" +#endif /* WINCE */ + diff --git a/drivers/ar6000/include/bmi.h b/drivers/ar6000/include/bmi.h new file mode 100644 index 00000000000..2eb7134c7b8 --- /dev/null +++ b/drivers/ar6000/include/bmi.h @@ -0,0 +1,100 @@ +#ifndef _BMI_H_ +#define _BMI_H_ +/* + * Copyright (c) 2004-2005 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + * BMI declarations and prototypes + */ + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Header files */ +#include "a_config.h" +#include "athdefs.h" +#include "a_types.h" +#include "hif.h" +#include "a_osapi.h" +#include "bmi_msg.h" + +void +BMIInit(void); + +A_STATUS +BMIDone(HIF_DEVICE *device); + +A_STATUS +BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info); + +A_STATUS +BMIReadMemory(HIF_DEVICE *device, + A_UINT32 address, + A_UCHAR *buffer, + A_UINT32 length); + +A_STATUS +BMIWriteMemory(HIF_DEVICE *device, + A_UINT32 address, + A_UCHAR *buffer, + A_UINT32 length); + +A_STATUS +BMIExecute(HIF_DEVICE *device, + A_UINT32 address, + A_UINT32 *param); + +A_STATUS +BMISetAppStart(HIF_DEVICE *device, + A_UINT32 address); + +A_STATUS +BMIReadSOCRegister(HIF_DEVICE *device, + A_UINT32 address, + A_UINT32 *param); + +A_STATUS +BMIWriteSOCRegister(HIF_DEVICE *device, + A_UINT32 address, + A_UINT32 param); + +A_STATUS +BMIrompatchInstall(HIF_DEVICE *device, + A_UINT32 ROM_addr, + A_UINT32 RAM_addr, + A_UINT32 nbytes, + A_UINT32 do_activate, + A_UINT32 *patch_id); + +A_STATUS +BMIrompatchUninstall(HIF_DEVICE *device, + A_UINT32 rompatch_id); + +A_STATUS +BMIrompatchActivate(HIF_DEVICE *device, + A_UINT32 rompatch_count, + A_UINT32 *rompatch_list); + +A_STATUS +BMIrompatchDeactivate(HIF_DEVICE *device, + A_UINT32 rompatch_count, + A_UINT32 *rompatch_list); + +#ifdef __cplusplus +} +#endif + +#endif /* _BMI_H_ */ diff --git a/drivers/ar6000/include/bmi_msg.h b/drivers/ar6000/include/bmi_msg.h new file mode 100644 index 00000000000..7c91ef47389 --- /dev/null +++ b/drivers/ar6000/include/bmi_msg.h @@ -0,0 +1,199 @@ +#ifndef __BMI_MSG_H__ +#define __BMI_MSG_H__ +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +/* + * Bootloader Messaging Interface (BMI) + * + * BMI is a very simple messaging interface used during initialization + * to read memory, write memory, execute code, and to define an + * application entry PC. + * + * It is used to download an application to AR6K, to provide + * patches to code that is already resident on AR6K, and generally + * to examine and modify state. The Host has an opportunity to use + * BMI only once during bootup. Once the Host issues a BMI_DONE + * command, this opportunity ends. + * + * The Host writes BMI requests to mailbox0, and reads BMI responses + * from mailbox0. BMI requests all begin with a command + * (see below for specific commands), and are followed by + * command-specific data. + * + * Flow control: + * The Host can only issue a command once the Target gives it a + * "BMI Command Credit", using AR6K Counter #4. As soon as the + * Target has completed a command, it issues another BMI Command + * Credit (so the Host can issue the next command). + * + * BMI handles all required Target-side cache flushing. + */ + + +/* Maximum data size used for BMI transfers */ +#define BMI_DATASZ_MAX 32 + +/* BMI Commands */ + +#define BMI_NO_COMMAND 0 + +#define BMI_DONE 1 + /* + * Semantics: Host is done using BMI + * Request format: + * A_UINT32 command (BMI_DONE) + * Response format: none + */ + +#define BMI_READ_MEMORY 2 + /* + * Semantics: Host reads AR6K memory + * Request format: + * A_UINT32 command (BMI_READ_MEMORY) + * A_UINT32 address + * A_UINT32 length, at most BMI_DATASZ_MAX + * Response format: + * A_UINT8 data[length] + */ + +#define BMI_WRITE_MEMORY 3 + /* + * Semantics: Host writes AR6K memory + * Request format: + * A_UINT32 command (BMI_WRITE_MEMORY) + * A_UINT32 address + * A_UINT32 length, at most BMI_DATASZ_MAX + * A_UINT8 data[length] + * Response format: none + */ + +#define BMI_EXECUTE 4 + /* + * Semantics: Causes AR6K to execute code + * Request format: + * A_UINT32 command (BMI_EXECUTE) + * A_UINT32 address + * A_UINT32 parameter + * Response format: + * A_UINT32 return value + */ + +#define BMI_SET_APP_START 5 + /* + * Semantics: Set Target application starting address + * Request format: + * A_UINT32 command (BMI_SET_APP_START) + * A_UINT32 address + * Response format: none + */ + +#define BMI_READ_SOC_REGISTER 6 + /* + * Semantics: Read a 32-bit Target SOC register. + * Request format: + * A_UINT32 command (BMI_READ_REGISTER) + * A_UINT32 address + * Response format: + * A_UINT32 value + */ + +#define BMI_WRITE_SOC_REGISTER 7 + /* + * Semantics: Write a 32-bit Target SOC register. + * Request format: + * A_UINT32 command (BMI_WRITE_REGISTER) + * A_UINT32 address + * A_UINT32 value + * + * Response format: none + */ + +#define BMI_GET_TARGET_ID 8 +#define BMI_GET_TARGET_INFO 8 + /* + * Semantics: Fetch the 4-byte Target information + * Request format: + * A_UINT32 command (BMI_GET_TARGET_ID/INFO) + * Response format1 (old firmware): + * A_UINT32 TargetVersionID + * Response format2 (newer firmware): + * A_UINT32 TARGET_VERSION_SENTINAL + * struct bmi_target_info; + */ + +struct bmi_target_info { + A_UINT32 target_info_byte_count; /* size of this structure */ + A_UINT32 target_ver; /* Target Version ID */ + A_UINT32 target_type; /* Target type */ +}; +#define TARGET_VERSION_SENTINAL 0xffffffff +#define TARGET_TYPE_AR6001 1 +#define TARGET_TYPE_AR6002 2 + + +#define BMI_ROMPATCH_INSTALL 9 + /* + * Semantics: Install a ROM Patch. + * Request format: + * A_UINT32 command (BMI_ROMPATCH_INSTALL) + * A_UINT32 Target ROM Address + * A_UINT32 Target RAM Address + * A_UINT32 Size, in bytes + * A_UINT32 Activate? 1-->activate; + * 0-->install but do not activate + * Response format: + * A_UINT32 PatchID + */ + +#define BMI_ROMPATCH_UNINSTALL 10 + /* + * Semantics: Uninstall a previously-installed ROM Patch, + * automatically deactivating, if necessary. + * Request format: + * A_UINT32 command (BMI_ROMPATCH_UNINSTALL) + * A_UINT32 PatchID + * + * Response format: none + */ + +#define BMI_ROMPATCH_ACTIVATE 11 + /* + * Semantics: Activate a list of previously-installed ROM Patches. + * Request format: + * A_UINT32 command (BMI_ROMPATCH_ACTIVATE) + * A_UINT32 rompatch_count + * A_UINT32 PatchID[rompatch_count] + * + * Response format: none + */ + +#define BMI_ROMPATCH_DEACTIVATE 12 + /* + * Semantics: Deactivate a list of active ROM Patches. + * Request format: + * A_UINT32 command (BMI_ROMPATCH_DEACTIVATE) + * A_UINT32 rompatch_count + * A_UINT32 PatchID[rompatch_count] + * + * Response format: none + */ + + +#endif /* __BMI_MSG_H__ */ diff --git a/drivers/ar6000/include/common_drv.h b/drivers/ar6000/include/common_drv.h new file mode 100644 index 00000000000..1bdc3dae5ca --- /dev/null +++ b/drivers/ar6000/include/common_drv.h @@ -0,0 +1,61 @@ +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + + +#ifndef COMMON_DRV_H_ +#define COMMON_DRV_H_ + +#include "hif.h" +#include "htc_packet.h" + + + +/* structure that is the state information for the default credit distribution callback + * drivers should instantiate (zero-init as well) this structure in their driver instance + * and pass it as a context to the HTC credit distribution functions */ +typedef struct _COMMON_CREDIT_STATE_INFO { + int TotalAvailableCredits; /* total credits in the system at startup */ + int CurrentFreeCredits; /* credits available in the pool that have not been + given out to endpoints */ + HTC_ENDPOINT_CREDIT_DIST *pLowestPriEpDist; /* pointer to the lowest priority endpoint dist struct */ +} COMMON_CREDIT_STATE_INFO; + + +/* HTC TX packet tagging definitions */ +#define AR6K_CONTROL_PKT_TAG HTC_TX_PACKET_TAG_USER_DEFINED +#define AR6K_DATA_PKT_TAG (AR6K_CONTROL_PKT_TAG + 1) + +#ifdef __cplusplus +extern "C" { +#endif + +/* OS-independent APIs */ +A_STATUS ar6000_setup_credit_dist(HTC_HANDLE HTCHandle, COMMON_CREDIT_STATE_INFO *pCredInfo); +A_STATUS ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data); +A_STATUS ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data); +A_STATUS ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address, A_UCHAR *data, A_UINT32 length); +A_STATUS ar6000_reset_device(HIF_DEVICE *hifDevice, A_UINT32 TargetType); +void ar6000_dump_target_assert_info(HIF_DEVICE *hifDevice, A_UINT32 TargetType); +A_STATUS ar6000_reset_device_skipflash(HIF_DEVICE *hifDevice); + +#ifdef __cplusplus +} +#endif + +#endif /*COMMON_DRV_H_*/ diff --git a/drivers/ar6000/include/dbglog.h b/drivers/ar6000/include/dbglog.h new file mode 100644 index 00000000000..3d1e528f757 --- /dev/null +++ b/drivers/ar6000/include/dbglog.h @@ -0,0 +1,107 @@ +/* + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + * This file contains the definitions and data structures associated with + * the log based debug mechanism. + * + */ + +#ifndef _DBGLOG_H_ +#define _DBGLOG_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#define DBGLOG_TIMESTAMP_OFFSET 0 +#define DBGLOG_TIMESTAMP_MASK 0x0000FFFF /* Bit 0-15. Contains bit + 8-23 of the LF0 timer */ +#define DBGLOG_DBGID_OFFSET 16 +#define DBGLOG_DBGID_MASK 0x03FF0000 /* Bit 16-25 */ +#define DBGLOG_DBGID_NUM_MAX 256 /* Upper limit is width of mask */ + +#define DBGLOG_MODULEID_OFFSET 26 +#define DBGLOG_MODULEID_MASK 0x3C000000 /* Bit 26-29 */ +#define DBGLOG_MODULEID_NUM_MAX 16 /* Upper limit is width of mask */ + +/* + * Please ensure that the definition of any new module intrduced is captured + * between the DBGLOG_MODULEID_START and DBGLOG_MODULEID_END defines. The + * structure is required for the parser to correctly pick up the values for + * different modules. + */ +#define DBGLOG_MODULEID_START +#define DBGLOG_MODULEID_INF 0 +#define DBGLOG_MODULEID_WMI 1 +#define DBGLOG_MODULEID_CSERV 2 +#define DBGLOG_MODULEID_PM 3 +#define DBGLOG_MODULEID_TXRX_MGMTBUF 4 +#define DBGLOG_MODULEID_TXRX_TXBUF 5 +#define DBGLOG_MODULEID_TXRX_RXBUF 6 +#define DBGLOG_MODULEID_WOW 7 +#define DBGLOG_MODULEID_WHAL 8 +#define DBGLOG_MODULEID_END + +#define DBGLOG_NUM_ARGS_OFFSET 30 +#define DBGLOG_NUM_ARGS_MASK 0xC0000000 /* Bit 30-31 */ +#define DBGLOG_NUM_ARGS_MAX 2 /* Upper limit is width of mask */ + +#define DBGLOG_MODULE_LOG_ENABLE_OFFSET 0 +#define DBGLOG_MODULE_LOG_ENABLE_MASK 0x0000FFFF + +#define DBGLOG_REPORTING_ENABLED_OFFSET 16 +#define DBGLOG_REPORTING_ENABLED_MASK 0x00010000 + +#define DBGLOG_TIMESTAMP_RESOLUTION_OFFSET 17 +#define DBGLOG_TIMESTAMP_RESOLUTION_MASK 0x000E0000 + +#define DBGLOG_REPORT_SIZE_OFFSET 20 +#define DBGLOG_REPORT_SIZE_MASK 0x3FF00000 + +#define DBGLOG_LOG_BUFFER_SIZE 1500 +#define DBGLOG_DBGID_DEFINITION_LEN_MAX 64 + +struct dbglog_buf_s { + struct dbglog_buf_s *next; + A_INT8 *buffer; + A_UINT32 bufsize; + A_UINT32 length; + A_UINT32 count; + A_UINT32 free; +}; + +struct dbglog_hdr_s { + struct dbglog_buf_s *dbuf; + A_UINT32 dropped; +}; + +struct dbglog_config_s { + A_UINT32 cfgvalid; /* Mask with valid config bits */ + union { + /* TODO: Take care of endianness */ + struct { + A_UINT32 mmask:16; /* Mask of modules with logging on */ + A_UINT32 rep:1; /* Reporting enabled or not */ + A_UINT32 tsr:3; /* Time stamp resolution. Def: 1 ms */ + A_UINT32 size:10; /* Report size in number of messages */ + A_UINT32 reserved:2; + } dbglog_config; + + A_UINT32 value; + } u; +}; + +#define cfgmmask u.dbglog_config.mmask +#define cfgrep u.dbglog_config.rep +#define cfgtsr u.dbglog_config.tsr +#define cfgsize u.dbglog_config.size +#define cfgvalue u.value + +#ifdef __cplusplus +} +#endif + +#endif /* _DBGLOG_H_ */ diff --git a/drivers/ar6000/include/dbglog_api.h b/drivers/ar6000/include/dbglog_api.h new file mode 100644 index 00000000000..06c8102e12b --- /dev/null +++ b/drivers/ar6000/include/dbglog_api.h @@ -0,0 +1,46 @@ +#ifndef _DBGLOG_API_H_ +#define _DBGLOG_API_H_ +/* + * Copyright (c) 2004-2006 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + * This file contains host side debug primitives. + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include "dbglog.h" + +#define DBGLOG_HOST_LOG_BUFFER_SIZE DBGLOG_LOG_BUFFER_SIZE + +#define DBGLOG_GET_DBGID(arg) \ + ((arg & DBGLOG_DBGID_MASK) >> DBGLOG_DBGID_OFFSET) + +#define DBGLOG_GET_MODULEID(arg) \ + ((arg & DBGLOG_MODULEID_MASK) >> DBGLOG_MODULEID_OFFSET) + +#define DBGLOG_GET_NUMARGS(arg) \ + ((arg & DBGLOG_NUM_ARGS_MASK) >> DBGLOG_NUM_ARGS_OFFSET) + +#define DBGLOG_GET_TIMESTAMP(arg) \ + ((arg & DBGLOG_TIMESTAMP_MASK) >> DBGLOG_TIMESTAMP_OFFSET) + +#ifdef __cplusplus +} +#endif + +#endif /* _DBGLOG_API_H_ */ diff --git a/drivers/ar6000/include/dbglog_id.h b/drivers/ar6000/include/dbglog_id.h new file mode 100644 index 00000000000..ce22b168242 --- /dev/null +++ b/drivers/ar6000/include/dbglog_id.h @@ -0,0 +1,307 @@ +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + * This file contains the definitions of the debug identifiers for different + * modules. + * + */ + +#ifndef _DBGLOG_ID_H_ +#define _DBGLOG_ID_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * The nomenclature for the debug identifiers is MODULE_DESCRIPTION. + * Please ensure that the definition of any new debugid introduced is captured + * between the <MODULE>_DBGID_DEFINITION_START and + * <MODULE>_DBGID_DEFINITION_END defines. The structure is required for the + * parser to correctly pick up the values for different debug identifiers. + */ + +/* INF debug identifier definitions */ +#define INF_DBGID_DEFINITION_START +#define INF_ASSERTION_FAILED 1 +#define INF_TARGET_ID 2 +#define INF_DBGID_DEFINITION_END + +/* WMI debug identifier definitions */ +#define WMI_DBGID_DEFINITION_START +#define WMI_CMD_RX_XTND_PKT_TOO_SHORT 1 +#define WMI_EXTENDED_CMD_NOT_HANDLED 2 +#define WMI_CMD_RX_PKT_TOO_SHORT 3 +#define WMI_CALLING_WMI_EXTENSION_FN 4 +#define WMI_CMD_NOT_HANDLED 5 +#define WMI_IN_SYNC 6 +#define WMI_TARGET_WMI_SYNC_CMD 7 +#define WMI_SET_SNR_THRESHOLD_PARAMS 8 +#define WMI_SET_RSSI_THRESHOLD_PARAMS 9 +#define WMI_SET_LQ_TRESHOLD_PARAMS 10 +#define WMI_TARGET_CREATE_PSTREAM_CMD 11 +#define WMI_WI_DTM_INUSE 12 +#define WMI_TARGET_DELETE_PSTREAM_CMD 13 +#define WMI_TARGET_IMPLICIT_DELETE_PSTREAM_CMD 14 +#define WMI_TARGET_GET_BIT_RATE_CMD 15 +#define WMI_GET_RATE_MASK_CMD_FIX_RATE_MASK_IS 16 +#define WMI_TARGET_GET_AVAILABLE_CHANNELS_CMD 17 +#define WMI_TARGET_GET_TX_PWR_CMD 18 +#define WMI_FREE_EVBUF_WMIBUF 19 +#define WMI_FREE_EVBUF_DATABUF 20 +#define WMI_FREE_EVBUF_BADFLAG 21 +#define WMI_HTC_RX_ERROR_DATA_PACKET 22 +#define WMI_HTC_RX_SYNC_PAUSING_FOR_MBOX 23 +#define WMI_INCORRECT_WMI_DATA_HDR_DROPPING_PKT 24 +#define WMI_SENDING_READY_EVENT 25 +#define WMI_SETPOWER_MDOE_TO_MAXPERF 26 +#define WMI_SETPOWER_MDOE_TO_REC 27 +#define WMI_BSSINFO_EVENT_FROM 28 +#define WMI_TARGET_GET_STATS_CMD 29 +#define WMI_SENDING_SCAN_COMPLETE_EVENT 30 +#define WMI_SENDING_RSSI_INDB_THRESHOLD_EVENT 31 +#define WMI_SENDING_RSSI_INDBM_THRESHOLD_EVENT 32 +#define WMI_SENDING_LINK_QUALITY_THRESHOLD_EVENT 33 +#define WMI_SENDING_ERROR_REPORT_EVENT 34 +#define WMI_SENDING_CAC_EVENT 35 +#define WMI_TARGET_GET_ROAM_TABLE_CMD 36 +#define WMI_TARGET_GET_ROAM_DATA_CMD 37 +#define WMI_SENDING_GPIO_INTR_EVENT 38 +#define WMI_SENDING_GPIO_ACK_EVENT 39 +#define WMI_SENDING_GPIO_DATA_EVENT 40 +#define WMI_CMD_RX 41 +#define WMI_CMD_RX_XTND 42 +#define WMI_EVENT_SEND 43 +#define WMI_EVENT_SEND_XTND 44 +#define WMI_DBGID_DEFINITION_END + +/* CSERV debug identifier definitions */ +#define CSERV_DBGID_DEFINITION_START +#define CSERV_BEGIN_SCAN1 1 +#define CSERV_BEGIN_SCAN2 2 +#define CSERV_END_SCAN1 3 +#define CSERV_END_SCAN2 4 +#define CSERV_CHAN_SCAN_START 5 +#define CSERV_CHAN_SCAN_STOP 6 +#define CSERV_CHANNEL_OPPPORTUNITY 7 +#define CSERV_NC_TIMEOUT 8 +#define CSERV_BACK_HOME 10 +#define CSERV_CHMGR_CH_CALLBACK1 11 +#define CSERV_CHMGR_CH_CALLBACK2 12 +#define CSERV_CHMGR_CH_CALLBACK3 13 +#define CSERV_SET_SCAN_PARAMS1 14 +#define CSERV_SET_SCAN_PARAMS2 15 +#define CSERV_SET_SCAN_PARAMS3 16 +#define CSERV_SET_SCAN_PARAMS4 17 +#define CSERV_ABORT_SCAN 18 +#define CSERV_NEWSTATE 19 +#define CSERV_MINCHMGR_OP_END 20 +#define CSERV_CHMGR_OP_END 21 +#define CSERV_DISCONNECT_TIMEOUT 22 +#define CSERV_ROAM_TIMEOUT 23 +#define CSERV_FORCE_SCAN1 24 +#define CSERV_FORCE_SCAN2 25 +#define CSERV_FORCE_SCAN3 26 +#define CSERV_UTIL_TIMEOUT 27 +#define CSERV_RSSIPOLLER 28 +#define CSERV_RETRY_CONNECT_TIMEOUT 29 +#define CSERV_RSSIINDBMPOLLER 30 +#define CSERV_BGSCAN_ENABLE 31 +#define CSERV_BGSCAN_DISABLE 32 +#define CSERV_WLAN_START_SCAN_CMD1 33 +#define CSERV_WLAN_START_SCAN_CMD2 34 +#define CSERV_WLAN_START_SCAN_CMD3 35 +#define CSERV_START_SCAN_CMD 36 +#define CSERV_START_FORCE_SCAN 37 +#define CSERV_NEXT_CHAN 38 +#define CSERV_SET_REGCODE 39 +#define CSERV_START_ADHOC 40 +#define CSERV_ADHOC_AT_HOME 41 +#define CSERV_OPT_AT_HOME 42 +#define CSERV_WLAN_CONNECT_CMD 43 +#define CSERV_WLAN_RECONNECT_CMD 44 +#define CSERV_WLAN_DISCONNECT_CMD 45 +#define CSERV_BSS_CHANGE_CHANNEL 46 +#define CSERV_BEACON_RX 47 +#define CSERV_KEEPALIVE_CHECK 48 +#define CSERV_RC_BEGIN_SCAN 49 +#define CSERV_RC_SCAN_START 50 +#define CSERV_RC_SCAN_STOP 51 +#define CSERV_RC_NEXT 52 +#define CSERV_RC_SCAN_END 53 +#define CSERV_PROBE_CALLBACK 54 +#define CSERV_ROAM1 55 +#define CSERV_ROAM2 56 +#define CSERV_ROAM3 57 +#define CSERV_CONNECT_EVENT 58 +#define CSERV_DISCONNECT_EVENT 59 +#define CSERV_BMISS_HANDLER1 60 +#define CSERV_BMISS_HANDLER2 61 +#define CSERV_BMISS_HANDLER3 62 +#define CSERV_LOWRSSI_HANDLER 63 +#define CSERV_WLAN_SET_PMKID_CMD 64 +#define CSERV_RECONNECT_REQUEST 65 +#define CSERV_KEYSPLUMBED_EVENT 66 +#define CSERV_NEW_REG 67 +#define CSERV_SET_RSSI_THOLD 68 +#define CSERV_RSSITHRESHOLDCHECK 69 +#define CSERV_RSSIINDBMTHRESHOLDCHECK 70 +#define CSERV_WLAN_SET_OPT_CMD1 71 +#define CSERV_WLAN_SET_OPT_CMD2 72 +#define CSERV_WLAN_SET_OPT_CMD3 73 +#define CSERV_WLAN_SET_OPT_CMD4 74 +#define CSERV_SCAN_CONNECT_STOP 75 +#define CSERV_BMISS_HANDLER4 76 +#define CSERV_INITIALIZE_TIMER 77 +#define CSERV_ARM_TIMER 78 +#define CSERV_DISARM_TIMER 79 +#define CSERV_UNINITIALIZE_TIMER 80 +#define CSERV_DISCONNECT_EVENT2 81 +#define CSERV_SCAN_CONNECT_START 82 +#define CSERV_BSSINFO_MEMORY_ALLOC_FAILED 83 +#define CSERV_SET_SCAN_PARAMS5 84 +#define CSERV_DBGID_DEFINITION_END + +/* TXRX debug identifier definitions */ +#define TXRX_TXBUF_DBGID_DEFINITION_START +#define TXRX_TXBUF_ALLOCATE_BUF 1 +#define TXRX_TXBUF_QUEUE_BUF_TO_MBOX 2 +#define TXRX_TXBUF_QUEUE_BUF_TO_TXQ 3 +#define TXRX_TXBUF_TXQ_DEPTH 4 +#define TXRX_TXBUF_IBSS_QUEUE_TO_SFQ 5 +#define TXRX_TXBUF_IBSS_QUEUE_TO_TXQ_FRM_SFQ 6 +#define TXRX_TXBUF_INITIALIZE_TIMER 7 +#define TXRX_TXBUF_ARM_TIMER 8 +#define TXRX_TXBUF_DISARM_TIMER 9 +#define TXRX_TXBUF_UNINITIALIZE_TIMER 10 +#define TXRX_TXBUF_DBGID_DEFINITION_END + +#define TXRX_RXBUF_DBGID_DEFINITION_START +#define TXRX_RXBUF_ALLOCATE_BUF 1 +#define TXRX_RXBUF_QUEUE_TO_HOST 2 +#define TXRX_RXBUF_QUEUE_TO_WLAN 3 +#define TXRX_RXBUF_ZERO_LEN_BUF 4 +#define TXRX_RXBUF_QUEUE_TO_HOST_LASTBUF_IN_RXCHAIN 5 +#define TXRX_RXBUF_LASTBUF_IN_RXCHAIN_ZEROBUF 6 +#define TXRX_RXBUF_QUEUE_EMPTY_QUEUE_TO_WLAN 7 +#define TXRX_RXBUF_SEND_TO_RECV_MGMT 8 +#define TXRX_RXBUF_SEND_TO_IEEE_LAYER 9 +#define TXRX_RXBUF_DBGID_DEFINITION_END + +#define TXRX_MGMTBUF_DBGID_DEFINITION_START +#define TXRX_MGMTBUF_ALLOCATE_BUF 1 +#define TXRX_MGMTBUF_ALLOCATE_SM_BUF 2 +#define TXRX_MGMTBUF_ALLOCATE_RMBUF 3 +#define TXRX_MGMTBUF_GET_BUF 4 +#define TXRX_MGMTBUF_GET_SM_BUF 5 +#define TXRX_MGMTBUF_QUEUE_BUF_TO_TXQ 6 +#define TXRX_MGMTBUF_REAPED_BUF 7 +#define TXRX_MGMTBUF_REAPED_SM_BUF 8 +#define TXRX_MGMTBUF_WAIT_FOR_TXQ_DRAIN 9 +#define TXRX_MGMTBUF_WAIT_FOR_TXQ_SFQ_DRAIN 10 +#define TXRX_MGMTBUF_ENQUEUE_INTO_SFQ 11 +#define TXRX_MGMTBUF_DEQUEUE_FROM_SFQ 12 +#define TXRX_MGMTBUF_PAUSE_TXQ 13 +#define TXRX_MGMTBUF_RESUME_TXQ 14 +#define TXRX_MGMTBUF_WAIT_FORTXQ_DRAIN_TIMEOUT 15 +#define TXRX_MGMTBUF_DRAINQ 16 +#define TXRX_MGMTBUF_INDICATE_Q_DRAINED 17 +#define TXRX_MGMTBUF_DBGID_DEFINITION_END + +/* PM (Power Module) debug identifier definitions */ +#define PM_DBGID_DEFINITION_START +#define PM_INIT 1 +#define PM_ENABLE 2 +#define PM_SET_STATE 3 +#define PM_SET_POWERMODE 4 +#define PM_CONN_NOTIFY 5 +#define PM_REF_COUNT_NEGATIVE 6 +#define PM_APSD_ENABLE 7 +#define PM_UPDATE_APSD_STATE 8 +#define PM_CHAN_OP_REQ 9 +#define PM_SET_MY_BEACON_POLICY 10 +#define PM_SET_ALL_BEACON_POLICY 11 +#define PM_SET_PM_PARAMS1 12 +#define PM_SET_PM_PARAMS2 13 +#define PM_ADHOC_SET_PM_CAPS_FAIL 14 +#define PM_ADHOC_UNKNOWN_IBSS_ATTRIB_ID 15 +#define PM_DBGID_DEFINITION_END + +/* Wake on Wireless debug identifier definitions */ +#define WOW_DBGID_DEFINITION_START +#define WOW_INIT 1 +#define WOW_GET_CONFIG_DSET 2 +#define WOW_NO_CONFIG_DSET 3 +#define WOW_INVALID_CONFIG_DSET 4 +#define WOW_USE_DEFAULT_CONFIG 5 +#define WOW_SETUP_GPIO 6 +#define WOW_INIT_DONE 7 +#define WOW_SET_GPIO_PIN 8 +#define WOW_CLEAR_GPIO_PIN 9 +#define WOW_SET_WOW_MODE_CMD 10 +#define WOW_SET_HOST_MODE_CMD 11 +#define WOW_ADD_WOW_PATTERN_CMD 12 +#define WOW_NEW_WOW_PATTERN_AT_INDEX 13 +#define WOW_DEL_WOW_PATTERN_CMD 14 +#define WOW_LIST_CONTAINS_PATTERNS 15 +#define WOW_GET_WOW_LIST_CMD 16 +#define WOW_INVALID_FILTER_ID 17 +#define WOW_INVALID_FILTER_LISTID 18 +#define WOW_NO_VALID_FILTER_AT_ID 19 +#define WOW_NO_VALID_LIST_AT_ID 20 +#define WOW_NUM_PATTERNS_EXCEEDED 21 +#define WOW_NUM_LISTS_EXCEEDED 22 +#define WOW_GET_WOW_STATS 23 +#define WOW_CLEAR_WOW_STATS 24 +#define WOW_WAKEUP_HOST 25 +#define WOW_EVENT_WAKEUP_HOST 26 +#define WOW_EVENT_DISCARD 27 +#define WOW_PATTERN_MATCH 28 +#define WOW_PATTERN_NOT_MATCH 29 +#define WOW_PATTERN_NOT_MATCH_OFFSET 30 +#define WOW_DISABLED_HOST_ASLEEP 31 +#define WOW_ENABLED_HOST_ASLEEP_NO_PATTERNS 32 +#define WOW_ENABLED_HOST_ASLEEP_NO_MATCH_FOUND 33 +#define WOW_DBGID_DEFINITION_END + +/* WHAL debug identifier definitions */ +#define WHAL_DBGID_DEFINITION_START +#define WHAL_ERROR_ANI_CONTROL 1 +#define WHAL_ERROR_CHIP_TEST1 2 +#define WHAL_ERROR_CHIP_TEST2 3 +#define WHAL_ERROR_EEPROM_CHECKSUM 4 +#define WHAL_ERROR_EEPROM_MACADDR 5 +#define WHAL_ERROR_INTERRUPT_HIU 6 +#define WHAL_ERROR_KEYCACHE_RESET 7 +#define WHAL_ERROR_KEYCACHE_SET 8 +#define WHAL_ERROR_KEYCACHE_TYPE 9 +#define WHAL_ERROR_KEYCACHE_TKIPENTRY 10 +#define WHAL_ERROR_KEYCACHE_WEPLENGTH 11 +#define WHAL_ERROR_PHY_INVALID_CHANNEL 12 +#define WHAL_ERROR_POWER_AWAKE 13 +#define WHAL_ERROR_POWER_SET 14 +#define WHAL_ERROR_RECV_STOPDMA 15 +#define WHAL_ERROR_RECV_STOPPCU 16 +#define WHAL_ERROR_RESET_CHANNF1 17 +#define WHAL_ERROR_RESET_CHANNF2 18 +#define WHAL_ERROR_RESET_PM 19 +#define WHAL_ERROR_RESET_OFFSETCAL 20 +#define WHAL_ERROR_RESET_RFGRANT 21 +#define WHAL_ERROR_RESET_RXFRAME 22 +#define WHAL_ERROR_RESET_STOPDMA 23 +#define WHAL_ERROR_RESET_RECOVER 24 +#define WHAL_ERROR_XMIT_COMPUTE 25 +#define WHAL_ERROR_XMIT_NOQUEUE 26 +#define WHAL_ERROR_XMIT_ACTIVEQUEUE 27 +#define WHAL_ERROR_XMIT_BADTYPE 28 +#define WHAL_DBGID_DEFINITION_END + +#ifdef __cplusplus +} +#endif + +#endif /* _DBGLOG_ID_H_ */ diff --git a/drivers/ar6000/include/dl_list.h b/drivers/ar6000/include/dl_list.h new file mode 100644 index 00000000000..4b9c5819854 --- /dev/null +++ b/drivers/ar6000/include/dl_list.h @@ -0,0 +1,114 @@ +/* + * + * Double-link list definitions (adapted from Atheros SDIO stack) + * + * Copyright (c) 2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ +#ifndef __DL_LIST_H___ +#define __DL_LIST_H___ + +#define A_CONTAINING_STRUCT(address, struct_type, field_name)\ + ((struct_type *)((A_UINT32)(address) - (A_UINT32)(&((struct_type *)0)->field_name))) + +/* list functions */ +/* pointers for the list */ +typedef struct _DL_LIST { + struct _DL_LIST *pPrev; + struct _DL_LIST *pNext; +}DL_LIST, *PDL_LIST; +/* + * DL_LIST_INIT , initialize doubly linked list +*/ +#define DL_LIST_INIT(pList)\ + {(pList)->pPrev = pList; (pList)->pNext = pList;} + +#define DL_LIST_IS_EMPTY(pList) (((pList)->pPrev == (pList)) && ((pList)->pNext == (pList))) +#define DL_LIST_GET_ITEM_AT_HEAD(pList) (pList)->pNext +#define DL_LIST_GET_ITEM_AT_TAIL(pList) (pList)->pPrev +/* + * ITERATE_OVER_LIST pStart is the list, pTemp is a temp list member + * NOT: do not use this function if the items in the list are deleted inside the + * iteration loop +*/ +#define ITERATE_OVER_LIST(pStart, pTemp) \ + for((pTemp) =(pStart)->pNext; pTemp != (pStart); (pTemp) = (pTemp)->pNext) + + +/* safe iterate macro that allows the item to be removed from the list + * the iteration continues to the next item in the list + */ +#define ITERATE_OVER_LIST_ALLOW_REMOVE(pStart,pItem,st,offset) \ +{ \ + PDL_LIST pTemp; \ + pTemp = (pStart)->pNext; \ + while (pTemp != (pStart)) { \ + (pItem) = A_CONTAINING_STRUCT(pTemp,st,offset); \ + pTemp = pTemp->pNext; \ + +#define ITERATE_END }} + +/* + * DL_ListInsertTail - insert pAdd to the end of the list +*/ +static INLINE PDL_LIST DL_ListInsertTail(PDL_LIST pList, PDL_LIST pAdd) { + /* insert at tail */ + pAdd->pPrev = pList->pPrev; + pAdd->pNext = pList; + pList->pPrev->pNext = pAdd; + pList->pPrev = pAdd; + return pAdd; +} + +/* + * DL_ListInsertHead - insert pAdd into the head of the list +*/ +static INLINE PDL_LIST DL_ListInsertHead(PDL_LIST pList, PDL_LIST pAdd) { + /* insert at head */ + pAdd->pPrev = pList; + pAdd->pNext = pList->pNext; + pList->pNext->pPrev = pAdd; + pList->pNext = pAdd; + return pAdd; +} + +#define DL_ListAdd(pList,pItem) DL_ListInsertHead((pList),(pItem)) +/* + * DL_ListRemove - remove pDel from list +*/ +static INLINE PDL_LIST DL_ListRemove(PDL_LIST pDel) { + pDel->pNext->pPrev = pDel->pPrev; + pDel->pPrev->pNext = pDel->pNext; + /* point back to itself just to be safe, incase remove is called again */ + pDel->pNext = pDel; + pDel->pPrev = pDel; + return pDel; +} + +/* + * DL_ListRemoveItemFromHead - get a list item from the head +*/ +static INLINE PDL_LIST DL_ListRemoveItemFromHead(PDL_LIST pList) { + PDL_LIST pItem = NULL; + if (pList->pNext != pList) { + pItem = pList->pNext; + /* remove the first item from head */ + DL_ListRemove(pItem); + } + return pItem; +} + +#endif /* __DL_LIST_H___ */ diff --git a/drivers/ar6000/include/dset_api.h b/drivers/ar6000/include/dset_api.h new file mode 100644 index 00000000000..de5cc6a66e0 --- /dev/null +++ b/drivers/ar6000/include/dset_api.h @@ -0,0 +1,63 @@ +/* + * Copyright (c) 2004-2006 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + * $Id: //depot/sw/releases/olca2.0-GPL/host/include/dset_api.h#1 $ + * + * Host-side DataSet API. + * + */ + +#ifndef _DSET_API_H_ +#define _DSET_API_H_ + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* + * Host-side DataSet support is optional, and is not + * currently required for correct operation. To disable + * Host-side DataSet support, set this to 0. + */ +#ifndef CONFIG_HOST_DSET_SUPPORT +#define CONFIG_HOST_DSET_SUPPORT 1 +#endif + +/* Called to send a DataSet Open Reply back to the Target. */ +A_STATUS wmi_dset_open_reply(struct wmi_t *wmip, + A_UINT32 status, + A_UINT32 access_cookie, + A_UINT32 size, + A_UINT32 version, + A_UINT32 targ_handle, + A_UINT32 targ_reply_fn, + A_UINT32 targ_reply_arg); + +/* Called to send a DataSet Data Reply back to the Target. */ +A_STATUS wmi_dset_data_reply(struct wmi_t *wmip, + A_UINT32 status, + A_UINT8 *host_buf, + A_UINT32 length, + A_UINT32 targ_buf, + A_UINT32 targ_reply_fn, + A_UINT32 targ_reply_arg); + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + + +#endif /* _DSET_API_H_ */ diff --git a/drivers/ar6000/include/dset_internal.h b/drivers/ar6000/include/dset_internal.h new file mode 100644 index 00000000000..f0be380e692 --- /dev/null +++ b/drivers/ar6000/include/dset_internal.h @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2007 Atheros Communications Inc. + * All rights reserved. + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + */ + +#ifndef __DSET_INTERNAL_H__ +#define __DSET_INTERNAL_H__ + +/* + * Internal dset definitions, common for DataSet layer. + */ + +#define DSET_TYPE_STANDARD 0 +#define DSET_TYPE_BPATCHED 1 +#define DSET_TYPE_COMPRESSED 2 + +/* Dataset descriptor */ + +typedef struct dset_descriptor_s { + struct dset_descriptor_s *next; /* List link. NULL only at the last + descriptor */ + A_UINT16 id; /* Dset ID */ + A_UINT16 size; /* Dset size. */ + void *DataPtr; /* Pointer to raw data for standard + DataSet or pointer to original + dset_descriptor for patched + DataSet */ + A_UINT32 data_type; /* DSET_TYPE_*, above */ + + void *AuxPtr; /* Additional data that might + needed for data_type. For + example, pointer to patch + Dataset descriptor for BPatch. */ +} dset_descriptor_t; + +#endif /* __DSET_INTERNAL_H__ */ diff --git a/drivers/ar6000/include/dsetid.h b/drivers/ar6000/include/dsetid.h new file mode 100644 index 00000000000..85729f8b3d0 --- /dev/null +++ b/drivers/ar6000/include/dsetid.h @@ -0,0 +1,110 @@ +/* + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + */ + +#ifndef __DSETID_H__ +#define __DSETID_H__ + +/* Well-known DataSet IDs */ +#define DSETID_UNUSED 0x00000000 +#define DSETID_BOARD_DATA 0x00000001 /* Cal and board data */ +#define DSETID_REGDB 0x00000002 /* Regulatory Database */ +#define DSETID_POWER_CONTROL 0x00000003 /* TX Pwr Lim & Ant Gain */ +#define DSETID_USER_CONFIG 0x00000004 /* User Configuration */ + +#define DSETID_ANALOG_CONTROL_DATA_START 0x00000005 +#define DSETID_ANALOG_CONTROL_DATA_END 0x00000025 +/* + * Get DSETID for various reference clock speeds. + * For each speed there are three DataSets that correspond + * to the three columns of bank6 data (addr, 11a, 11b/g). + * This macro returns the dsetid of the first of those + * three DataSets. + */ +#define ANALOG_CONTROL_DATA_DSETID(refclk) \ + (DSETID_ANALOG_CONTROL_DATA_START + 3*refclk) + +/* + * There are TWO STARTUP_PATCH DataSets. + * DSETID_STARTUP_PATCH is historical, and was applied before BMI on + * earlier systems. On AR6002, it is applied after BMI, just like + * DSETID_STARTUP_PATCH2. + */ +#define DSETID_STARTUP_PATCH 0x00000026 +#define DSETID_GPIO_CONFIG_PATCH 0x00000027 +#define DSETID_WLANREGS 0x00000028 /* override wlan regs */ +#define DSETID_STARTUP_PATCH2 0x00000029 + +#define DSETID_WOW_CONFIG 0x00000090 /* WoW Configuration */ + +/* Add WHAL_INI_DATA_ID to DSETID_INI_DATA for a specific WHAL INI table. */ +#define DSETID_INI_DATA 0x00000100 +/* Reserved for WHAL INI Tables: 0x100..0x11f */ +#define DSETID_INI_DATA_END 0x0000011f + +#define DSETID_VENDOR_START 0x00010000 /* Vendor-defined DataSets */ + +#define DSETID_INDEX_END 0xfffffffe /* Reserved to indicate the + end of a memory-based + DataSet Index */ +#define DSETID_INDEX_FREE 0xffffffff /* An unused index entry */ + +/* + * PATCH DataSet format: + * A list of patches, terminated by a patch with + * address=PATCH_END. + * + * This allows for patches to be stored in flash. + */ +struct patch_s { + A_UINT32 *address; + A_UINT32 data; +}; + +/* + * Skip some patches. Can be used to erase a single patch in a + * patch DataSet without having to re-write the DataSet. May + * also be used to embed information for use by subsequent + * patch code. The "data" in a PATCH_SKIP tells how many + * bytes of length "patch_s" to skip. + */ +#define PATCH_SKIP ((A_UINT32 *)0x00000000) + +/* + * Execute code at the address specified by "data". + * The address of the patch structure is passed as + * the one parameter. + */ +#define PATCH_CODE_ABS ((A_UINT32 *)0x00000001) + +/* + * Same as PATCH_CODE_ABS, but treat "data" as an + * offset from the start of the patch word. + */ +#define PATCH_CODE_REL ((A_UINT32 *)0x00000002) + +/* Mark the end of this patch DataSet. */ +#define PATCH_END ((A_UINT32 *)0xffffffff) + +/* + * A DataSet which contains a Binary Patch to some other DataSet + * uses the original dsetid with the DSETID_BPATCH_FLAG bit set. + * Such a BPatch DataSet consists of BPatch metadata followed by + * the bdiff bytes. BPatch metadata consists of a single 32-bit + * word that contains the size of the BPatched final image. + * + * To create a suitable bdiff DataSet, use bdiff in host/tools/bdiff + * to create "diffs": + * bdiff -q -O -nooldmd5 -nonewmd5 -d ORIGfile NEWfile diffs + * Then add BPatch metadata to the start of "diffs". + * + * NB: There are some implementation-induced restrictions + * on which DataSets can be BPatched. + */ +#define DSETID_BPATCH_FLAG 0x80000000 + +#endif /* __DSETID_H__ */ diff --git a/drivers/ar6000/include/gpio.h b/drivers/ar6000/include/gpio.h new file mode 100644 index 00000000000..2203c7e012a --- /dev/null +++ b/drivers/ar6000/include/gpio.h @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2005 Atheros Communications Inc. + * All rights reserved. + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + */ + +#if defined(AR6001) +#define GPIO_PIN_COUNT 18 +#else +#define GPIO_PIN_COUNT 18 +#endif + +/* + * Possible values for WMIX_GPIO_SET_REGISTER_CMDID. + * NB: These match hardware order, so that addresses can + * easily be computed. + */ +#define GPIO_ID_OUT 0x00000000 +#define GPIO_ID_OUT_W1TS 0x00000001 +#define GPIO_ID_OUT_W1TC 0x00000002 +#define GPIO_ID_ENABLE 0x00000003 +#define GPIO_ID_ENABLE_W1TS 0x00000004 +#define GPIO_ID_ENABLE_W1TC 0x00000005 +#define GPIO_ID_IN 0x00000006 +#define GPIO_ID_STATUS 0x00000007 +#define GPIO_ID_STATUS_W1TS 0x00000008 +#define GPIO_ID_STATUS_W1TC 0x00000009 +#define GPIO_ID_PIN0 0x0000000a +#define GPIO_ID_PIN(n) (GPIO_ID_PIN0+(n)) + +#define GPIO_LAST_REGISTER_ID GPIO_ID_PIN(17) +#define GPIO_ID_NONE 0xffffffff diff --git a/drivers/ar6000/include/gpio_api.h b/drivers/ar6000/include/gpio_api.h new file mode 100644 index 00000000000..8078aa57ff8 --- /dev/null +++ b/drivers/ar6000/include/gpio_api.h @@ -0,0 +1,57 @@ +#ifndef _GPIO_API_H_ +#define _GPIO_API_H_ +/* + * Copyright 2005 Atheros Communications, Inc., All Rights Reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +/* + * Host-side General Purpose I/O API. + * + * $Id: //depot/sw/releases/olca2.0-GPL/host/include/gpio_api.h#1 $ + */ + +/* + * Send a command to the Target in order to change output on GPIO pins. + */ +A_STATUS wmi_gpio_output_set(struct wmi_t *wmip, + A_UINT32 set_mask, + A_UINT32 clear_mask, + A_UINT32 enable_mask, + A_UINT32 disable_mask); + +/* + * Send a command to the Target requesting input state of GPIO pins. + */ +A_STATUS wmi_gpio_input_get(struct wmi_t *wmip); + +/* + * Send a command to the Target to change the value of a GPIO register. + */ +A_STATUS wmi_gpio_register_set(struct wmi_t *wmip, + A_UINT32 gpioreg_id, + A_UINT32 value); + +/* + * Send a command to the Target to fetch the value of a GPIO register. + */ +A_STATUS wmi_gpio_register_get(struct wmi_t *wmip, A_UINT32 gpioreg_id); + +/* + * Send a command to the Target, acknowledging some GPIO interrupts. + */ +A_STATUS wmi_gpio_intr_ack(struct wmi_t *wmip, A_UINT32 ack_mask); + +#endif /* _GPIO_API_H_ */ diff --git a/drivers/ar6000/include/hif.h b/drivers/ar6000/include/hif.h new file mode 100644 index 00000000000..846a69f3633 --- /dev/null +++ b/drivers/ar6000/include/hif.h @@ -0,0 +1,296 @@ +/* + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + * HIF specific declarations and prototypes + */ + +#ifndef _HIF_H_ +#define _HIF_H_ + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Header files */ +#include "a_config.h" +#include "athdefs.h" +#include "a_types.h" +#include "a_osapi.h" + +typedef struct htc_callbacks HTC_CALLBACKS; +typedef struct hif_device HIF_DEVICE; + +/* + * direction - Direction of transfer (HIF_READ/HIF_WRITE). + */ +#define HIF_READ 0x00000001 +#define HIF_WRITE 0x00000002 +#define HIF_DIR_MASK (HIF_READ | HIF_WRITE) + +/* + * type - An interface may support different kind of read/write commands. + * The command type is divided into a basic and an extended command + * and can be specified using HIF_BASIC_IO/HIF_EXTENDED_IO. + */ +#define HIF_BASIC_IO 0x00000004 +#define HIF_EXTENDED_IO 0x00000008 +#define HIF_TYPE_MASK (HIF_BASIC_IO | HIF_EXTENDED_IO) + +/* + * emode - This indicates the whether the command is to be executed in a + * blocking or non-blocking fashion (HIF_SYNCHRONOUS/ + * HIF_ASYNCHRONOUS). The read/write data paths in HTC have been + * implemented using the asynchronous mode allowing the the bus + * driver to indicate the completion of operation through the + * registered callback routine. The requirement primarily comes + * from the contexts these operations get called from (a driver's + * transmit context or the ISR context in case of receive). + * Support for both of these modes is essential. + */ +#define HIF_SYNCHRONOUS 0x00000010 +#define HIF_ASYNCHRONOUS 0x00000020 +#define HIF_EMODE_MASK (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS) + +/* + * dmode - An interface may support different kinds of commands based on + * the tradeoff between the amount of data it can carry and the + * setup time. Byte and Block modes are supported (HIF_BYTE_BASIS/ + * HIF_BLOCK_BASIS). In case of latter, the data is rounded off + * to the nearest block size by padding. The size of the block is + * configurable at compile time using the HIF_BLOCK_SIZE and is + * negotiated with the target during initialization after the + * dragon interrupts are enabled. + */ +#define HIF_BYTE_BASIS 0x00000040 +#define HIF_BLOCK_BASIS 0x00000080 +#define HIF_DMODE_MASK (HIF_BYTE_BASIS | HIF_BLOCK_BASIS) + +/* + * amode - This indicates if the address has to be incremented on dragon + * after every read/write operation (HIF?FIXED_ADDRESS/ + * HIF_INCREMENTAL_ADDRESS). + */ +#define HIF_FIXED_ADDRESS 0x00000100 +#define HIF_INCREMENTAL_ADDRESS 0x00000200 +#define HIF_AMODE_MASK (HIF_FIXED_ADDRESS | HIF_INCREMENTAL_ADDRESS) + +#define HIF_WR_ASYNC_BYTE_FIX \ + (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS) +#define HIF_WR_ASYNC_BYTE_INC \ + (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS) +#define HIF_WR_ASYNC_BLOCK_INC \ + (HIF_WRITE | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS) +#define HIF_WR_SYNC_BYTE_FIX \ + (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS) +#define HIF_WR_SYNC_BYTE_INC \ + (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS) +#define HIF_WR_SYNC_BLOCK_INC \ + (HIF_WRITE | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS) +#define HIF_RD_SYNC_BYTE_INC \ + (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS) +#define HIF_RD_SYNC_BYTE_FIX \ + (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS) +#define HIF_RD_ASYNC_BYTE_FIX \ + (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_FIXED_ADDRESS) +#define HIF_RD_ASYNC_BLOCK_FIX \ + (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS) +#define HIF_RD_ASYNC_BYTE_INC \ + (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS) +#define HIF_RD_ASYNC_BLOCK_INC \ + (HIF_READ | HIF_ASYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS) +#define HIF_RD_SYNC_BLOCK_INC \ + (HIF_READ | HIF_SYNCHRONOUS | HIF_EXTENDED_IO | HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS) + + +typedef enum { + HIF_DEVICE_POWER_STATE = 0, + HIF_DEVICE_GET_MBOX_BLOCK_SIZE, + HIF_DEVICE_GET_MBOX_ADDR, + HIF_DEVICE_GET_PENDING_EVENTS_FUNC, + HIF_DEVICE_GET_IRQ_PROC_MODE, + HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC, +} HIF_DEVICE_CONFIG_OPCODE; + +/* + * HIF CONFIGURE definitions: + * + * HIF_DEVICE_GET_MBOX_BLOCK_SIZE + * input : none + * output : array of 4 A_UINT32s + * notes: block size is returned for each mailbox (4) + * + * HIF_DEVICE_GET_MBOX_ADDR + * input : none + * output : array of 4 A_UINT32 + * notes: address is returned for each mailbox (4) in the array + * + * HIF_DEVICE_GET_PENDING_EVENTS_FUNC + * input : none + * output: HIF_PENDING_EVENTS_FUNC function pointer + * notes: this is optional for the HIF layer, if the request is + * not handled then it indicates that the upper layer can use + * the standard device methods to get pending events (IRQs, mailbox messages etc..) + * otherwise it can call the function pointer to check pending events. + * + * HIF_DEVICE_GET_IRQ_PROC_MODE + * input : none + * output : HIF_DEVICE_IRQ_PROCESSING_MODE (interrupt processing mode) + * note: the hif layer interfaces with the underlying OS-specific bus driver. The HIF + * layer can report whether IRQ processing is requires synchronous behavior or + * can be processed using asynchronous bus requests (typically faster). + * + * HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC + * input : + * output : HIF_MASK_UNMASK_RECV_EVENT function pointer + * notes: this is optional for the HIF layer. The HIF layer may require a special mechanism + * to mask receive message events. The upper layer can call this pointer when it needs + * to mask/unmask receive events (in case it runs out of buffers). + * + * + */ + +typedef enum { + HIF_DEVICE_IRQ_SYNC_ONLY, /* for HIF implementations that require the DSR to process all + interrupts before returning */ + HIF_DEVICE_IRQ_ASYNC_SYNC, /* for HIF implementations that allow DSR to process interrupts + using ASYNC I/O (that is HIFAckInterrupt can be called at a + later time */ +} HIF_DEVICE_IRQ_PROCESSING_MODE; + +#define HIF_MAX_DEVICES 1 + +struct htc_callbacks { + A_UCHAR *name; + A_UINT32 id; + A_STATUS (* deviceInsertedHandler)(void *hif_handle); + A_STATUS (* deviceRemovedHandler)(void *htc_handle, A_STATUS status); + A_STATUS (* deviceSuspendHandler)(void *htc_handle); + A_STATUS (* deviceResumeHandler)(void *htc_handle); + A_STATUS (* deviceWakeupHandler)(void *htc_handle); + A_STATUS (* rwCompletionHandler)(void *context, A_STATUS status); + A_STATUS (* dsrHandler)(void *htc_handle); +}; + + +#define HIF_OTHER_EVENTS (1 << 0) /* other interrupts (non-Recv) are pending, host + needs to read the register table to figure out what */ +#define HIF_RECV_MSG_AVAIL (1 << 1) /* pending recv packet */ + +typedef struct _HIF_PENDING_EVENTS_INFO { + A_UINT32 Events; + A_UINT32 LookAhead; +} HIF_PENDING_EVENTS_INFO; + + /* function to get pending events , some HIF modules use special mechanisms + * to detect packet available and other interrupts */ +typedef A_STATUS ( *HIF_PENDING_EVENTS_FUNC)(HIF_DEVICE *device, + HIF_PENDING_EVENTS_INFO *pEvents, + void *AsyncContext); + +#define HIF_MASK_RECV TRUE +#define HIF_UNMASK_RECV FALSE + /* function to mask recv events */ +typedef A_STATUS ( *HIF_MASK_UNMASK_RECV_EVENT)(HIF_DEVICE *device, + A_BOOL Mask, + void *AsyncContext); + + +/* + * This API is used by the HTC layer to initialize the HIF layer and to + * register different callback routines. Support for following events has + * been captured - DSR, Read/Write completion, Device insertion/removal, + * Device suspension/resumption/wakeup. In addition to this, the API is + * also used to register the name and the revision of the chip. The latter + * can be used to verify the revision of the chip read from the device + * before reporting it to HTC. + */ +int HIFInit(HTC_CALLBACKS *callbacks); + +/* + * This API is used to provide the read/write interface over the specific bus + * interface. + * address - Starting address in the dragon's address space. For mailbox + * writes, it refers to the start of the mbox boundary. It should + * be ensured that the last byte falls on the mailbox's EOM. For + * mailbox reads, it refers to the end of the mbox boundary. + * buffer - Pointer to the buffer containg the data to be transmitted or + * received. + * length - Amount of data to be transmitted or received. + * request - Characterizes the attributes of the command. + */ +A_STATUS +HIFReadWrite(HIF_DEVICE *device, + A_UINT32 address, + A_UCHAR *buffer, + A_UINT32 length, + A_UINT32 request, + void *context); + +/* + * This can be initiated from the unload driver context ie when the HTCShutdown + * routine is called. + */ +void HIFShutDownDevice(HIF_DEVICE *device); + +/* + * This should translate to an acknowledgment to the bus driver indicating that + * the previous interrupt request has been serviced and the all the relevant + * sources have been cleared. HTC is ready to process more interrupts. + * This should prevent the bus driver from raising an interrupt unless the + * previous one has been serviced and acknowledged using the previous API. + */ +void HIFAckInterrupt(HIF_DEVICE *device); + +void HIFMaskInterrupt(HIF_DEVICE *device); + +void HIFUnMaskInterrupt(HIF_DEVICE *device); + +/* + * This set of functions are to be used by the bus driver to notify + * the HIF module about various events. + * These are not implemented if the bus driver provides an alternative + * way for this notification though callbacks for instance. + */ +int HIFInsertEventNotify(void); + +int HIFRemoveEventNotify(void); + +int HIFIRQEventNotify(void); + +int HIFRWCompleteEventNotify(void); + +/* + * This function associates a opaque handle with the HIF layer + * to be used in communication with upper layer i.e. HTC. + * This would normaly be a pointer to htc_target data structure. + */ +void HIFSetHandle(void *hif_handle, void *handle); + +A_STATUS +HIFConfigureDevice(HIF_DEVICE *device, HIF_DEVICE_CONFIG_OPCODE opcode, + void *config, A_UINT32 configLen); + + +struct device; +struct device* +HIFGetOSDevice(HIF_DEVICE *device); + + +#ifdef __cplusplus +} +#endif + +#endif /* _HIF_H_ */ diff --git a/drivers/ar6000/include/host_version.h b/drivers/ar6000/include/host_version.h new file mode 100644 index 00000000000..c090115bcca --- /dev/null +++ b/drivers/ar6000/include/host_version.h @@ -0,0 +1,49 @@ +#ifndef _HOST_VERSION_H_ +#define _HOST_VERSION_H_ +/* + * Copyright (c) 2004-2005 Atheros Communications Inc. + * All rights reserved. + * + * This file contains version information for the sample host driver for the + * AR6000 chip + * + * $Id: //depot/sw/releases/olca2.0-GPL/host/include/host_version.h#2 $ + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include <AR6K_version.h> + +/* + * The version number is made up of major, minor, patch and build + * numbers. These are 16 bit numbers. The build and release script will + * set the build number using a Perforce counter. Here the build number is + * set to 9999 so that builds done without the build-release script are easily + * identifiable. + */ + +#define ATH_SW_VER_MAJOR __VER_MAJOR_ +#define ATH_SW_VER_MINOR __VER_MINOR_ +#define ATH_SW_VER_PATCH __VER_PATCH_ +#define ATH_SW_VER_BUILD 9999 + +#ifdef __cplusplus +} +#endif + +#endif /* _HOST_VERSION_H_ */ diff --git a/drivers/ar6000/include/htc.h b/drivers/ar6000/include/htc.h new file mode 100644 index 00000000000..152d867b71b --- /dev/null +++ b/drivers/ar6000/include/htc.h @@ -0,0 +1,190 @@ +/* + * Copyright (c) 2007 Atheros Communications Inc. + * All rights reserved. + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + */ + + +#ifndef __HTC_H__ +#define __HTC_H__ + +#ifndef ATH_TARGET +#include "athstartpack.h" +#endif + +#define A_OFFSETOF(type,field) (int)(&(((type *)NULL)->field)) + +#define ASSEMBLE_UNALIGNED_UINT16(p,highbyte,lowbyte) \ + (((A_UINT16)(((A_UINT8 *)(p))[(highbyte)])) << 8 | (A_UINT16)(((A_UINT8 *)(p))[(lowbyte)])) + +/* alignment independent macros (little-endian) to fetch UINT16s or UINT8s from a + * structure using only the type and field name. + * Use these macros if there is the potential for unaligned buffer accesses. */ +#define A_GET_UINT16_FIELD(p,type,field) \ + ASSEMBLE_UNALIGNED_UINT16(p,\ + A_OFFSETOF(type,field) + 1, \ + A_OFFSETOF(type,field)) + +#define A_SET_UINT16_FIELD(p,type,field,value) \ +{ \ + ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] = (A_UINT8)(value); \ + ((A_UINT8 *)(p))[A_OFFSETOF(type,field) + 1] = (A_UINT8)((value) >> 8); \ +} + +#define A_GET_UINT8_FIELD(p,type,field) \ + ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] + +#define A_SET_UINT8_FIELD(p,type,field,value) \ + ((A_UINT8 *)(p))[A_OFFSETOF(type,field)] = (value) + +/****** DANGER DANGER *************** + * + * The frame header length and message formats defined herein were + * selected to accommodate optimal alignment for target processing. This reduces code + * size and improves performance. + * + * Any changes to the header length may alter the alignment and cause exceptions + * on the target. When adding to the message structures insure that fields are + * properly aligned. + * + */ + +/* HTC frame header */ +typedef PREPACK struct _HTC_FRAME_HDR{ + /* do not remove or re-arrange these fields, these are minimally required + * to take advantage of 4-byte lookaheads in some hardware implementations */ + A_UINT8 EndpointID; + A_UINT8 Flags; + A_UINT16 PayloadLen; /* length of data (including trailer) that follows the header */ + + /***** end of 4-byte lookahead ****/ + + A_UINT8 ControlBytes[2]; + + /* message payload starts after the header */ + +} POSTPACK HTC_FRAME_HDR; + +/* frame header flags */ +#define HTC_FLAGS_NEED_CREDIT_UPDATE (1 << 0) +#define HTC_FLAGS_RECV_TRAILER (1 << 1) + + +#define HTC_HDR_LENGTH (sizeof(HTC_FRAME_HDR)) +#define HTC_MAX_TRAILER_LENGTH 255 +#define HTC_MAX_PAYLOAD_LENGTH (2048 - sizeof(HTC_FRAME_HDR)) + +/* HTC control message IDs */ +typedef enum { + HTC_MSG_READY_ID = 1, + HTC_MSG_CONNECT_SERVICE_ID = 2, + HTC_MSG_CONNECT_SERVICE_RESPONSE_ID = 3, + HTC_MSG_SETUP_COMPLETE_ID = 4, +} HTC_MSG_IDS; + +#define HTC_MAX_CONTROL_MESSAGE_LENGTH 256 + +/* base message ID header */ +typedef PREPACK struct { + A_UINT16 MessageID; +} POSTPACK HTC_UNKNOWN_MSG; + +/* HTC ready message + * direction : target-to-host */ +typedef PREPACK struct { + A_UINT16 MessageID; /* ID */ + A_UINT16 CreditCount; /* number of credits the target can offer */ + A_UINT16 CreditSize; /* size of each credit */ + A_UINT8 MaxEndpoints; /* maximum number of endpoints the target has resources for */ + A_UINT8 _Pad1; +} POSTPACK HTC_READY_MSG; + +#define HTC_SERVICE_META_DATA_MAX_LENGTH 128 + +/* connect service + * direction : host-to-target */ +typedef PREPACK struct { + A_UINT16 MessageID; + A_UINT16 ServiceID; /* service ID of the service to connect to */ + A_UINT16 ConnectionFlags; /* connection flags */ + +#define HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE (1 << 2) /* reduce credit dribbling when + the host needs credits */ +#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK (0x3) +#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_FOURTH 0x0 +#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF 0x1 +#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_THREE_FOURTHS 0x2 +#define HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_UNITY 0x3 + + A_UINT8 ServiceMetaLength; /* length of meta data that follows */ + A_UINT8 _Pad1; + + /* service-specific meta data starts after the header */ + +} POSTPACK HTC_CONNECT_SERVICE_MSG; + +/* connect response + * direction : target-to-host */ +typedef PREPACK struct { + A_UINT16 MessageID; + A_UINT16 ServiceID; /* service ID that the connection request was made */ + A_UINT8 Status; /* service connection status */ + A_UINT8 EndpointID; /* assigned endpoint ID */ + A_UINT16 MaxMsgSize; /* maximum expected message size on this endpoint */ + A_UINT8 ServiceMetaLength; /* length of meta data that follows */ + A_UINT8 _Pad1; + + /* service-specific meta data starts after the header */ + +} POSTPACK HTC_CONNECT_SERVICE_RESPONSE_MSG; + +typedef PREPACK struct { + A_UINT16 MessageID; + /* currently, no other fields */ +} POSTPACK HTC_SETUP_COMPLETE_MSG; + + +/* connect response status codes */ +#define HTC_SERVICE_SUCCESS 0 /* success */ +#define HTC_SERVICE_NOT_FOUND 1 /* service could not be found */ +#define HTC_SERVICE_FAILED 2 /* specific service failed the connect */ +#define HTC_SERVICE_NO_RESOURCES 3 /* no resources (i.e. no more endpoints) */ +#define HTC_SERVICE_NO_MORE_EP 4 /* specific service is not allowing any more + endpoints */ + +/* report record IDs */ +typedef enum { + HTC_RECORD_NULL = 0, + HTC_RECORD_CREDITS = 1, + HTC_RECORD_LOOKAHEAD = 2, +} HTC_RPT_IDS; + +typedef PREPACK struct { + A_UINT8 RecordID; /* Record ID */ + A_UINT8 Length; /* Length of record */ +} POSTPACK HTC_RECORD_HDR; + +typedef PREPACK struct { + A_UINT8 EndpointID; /* Endpoint that owns these credits */ + A_UINT8 Credits; /* credits to report since last report */ +} POSTPACK HTC_CREDIT_REPORT; + +typedef PREPACK struct { + A_UINT8 PreValid; /* pre valid guard */ + A_UINT8 LookAhead[4]; /* 4 byte lookahead */ + A_UINT8 PostValid; /* post valid guard */ + + /* NOTE: the LookAhead array is guarded by a PreValid and Post Valid guard bytes. + * The PreValid bytes must equal the inverse of the PostValid byte */ + +} POSTPACK HTC_LOOKAHEAD_REPORT; + +#ifndef ATH_TARGET +#include "athendpack.h" +#endif + + +#endif /* __HTC_H__ */ + diff --git a/drivers/ar6000/include/htc_api.h b/drivers/ar6000/include/htc_api.h new file mode 100644 index 00000000000..e75692d7efa --- /dev/null +++ b/drivers/ar6000/include/htc_api.h @@ -0,0 +1,439 @@ +/* + * + * Copyright (c) 2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifndef _HTC_API_H_ +#define _HTC_API_H_ + +#include <htc.h> +#include <htc_services.h> +#include "htc_packet.h" + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* TODO.. for BMI */ +#define ENDPOINT1 0 +// TODO -remove me, but we have to fix BMI first +#define HTC_MAILBOX_NUM_MAX 4 + + +/* ------ Endpoint IDS ------ */ +typedef enum +{ + ENDPOINT_UNUSED = -1, + ENDPOINT_0 = 0, + ENDPOINT_1 = 1, + ENDPOINT_2 = 2, + ENDPOINT_3, + ENDPOINT_4, + ENDPOINT_5, + ENDPOINT_6, + ENDPOINT_7, + ENDPOINT_8, + ENDPOINT_MAX, +} HTC_ENDPOINT_ID; + +/* this is the amount of header room required by users of HTC */ +#define HTC_HEADER_LEN HTC_HDR_LENGTH + +typedef void *HTC_HANDLE; + +typedef A_UINT16 HTC_SERVICE_ID; + +typedef struct _HTC_INIT_INFO { + void (*AddInstance)(HTC_HANDLE); + void (*DeleteInstance)(void *Instance); + void (*TargetFailure)(void *Instance, A_STATUS Status); +} HTC_INIT_INFO; + +/* per service connection send completion */ +typedef void (*HTC_EP_SEND_PKT_COMPLETE)(void *,HTC_PACKET *); +/* per service connection pkt received */ +typedef void (*HTC_EP_RECV_PKT)(void *,HTC_PACKET *); + +/* Optional per service connection receive buffer re-fill callback, + * On some OSes (like Linux) packets are allocated from a global pool and indicated up + * to the network stack. The driver never gets the packets back from the OS. For these OSes + * a refill callback can be used to allocate and re-queue buffers into HTC. + * + * On other OSes, the network stack can call into the driver's OS-specifc "return_packet" handler and + * the driver can re-queue these buffers into HTC. In this regard a refill callback is + * unnecessary */ +typedef void (*HTC_EP_RECV_REFILL)(void *, HTC_ENDPOINT_ID Endpoint); + +/* Optional per service connection callback when a send queue is full. This can occur if the + * host continues queueing up TX packets faster than credits can arrive + * To prevent the host (on some Oses like Linux) from continuously queueing packets + * and consuming resources, this callback is provided so that that the host + * can disable TX in the subsystem (i.e. network stack) + * Other OSes require a "per-packet" indication_RAW_STREAM_NUM_MAX for each completed TX packet, this + * closed loop mechanism will prevent the network stack from overunning the NIC */ +typedef void (*HTC_EP_SEND_QUEUE_FULL)(void *, HTC_ENDPOINT_ID Endpoint); +/* Optional per service connection callback when a send queue is available for receive new packet. */ +typedef void (*HTC_EP_SEND_QUEUE_AVAIL)(void *, HTC_ENDPOINT_ID Endpoint); + +typedef struct _HTC_EP_CALLBACKS { + void *pContext; /* context for each callback */ + HTC_EP_SEND_PKT_COMPLETE EpTxComplete; /* tx completion callback for connected endpoint */ + HTC_EP_RECV_PKT EpRecv; /* receive callback for connected endpoint */ + HTC_EP_RECV_REFILL EpRecvRefill; /* OPTIONAL receive re-fill callback for connected endpoint */ + HTC_EP_SEND_QUEUE_FULL EpSendFull; /* OPTIONAL send full callback */ + HTC_EP_SEND_QUEUE_AVAIL EpSendAvail; /* OPTIONAL send available callback */ +} HTC_EP_CALLBACKS; + +/* service connection information */ +typedef struct _HTC_SERVICE_CONNECT_REQ { + HTC_SERVICE_ID ServiceID; /* service ID to connect to */ + A_UINT16 ConnectionFlags; /* connection flags, see htc protocol definition */ + A_UINT8 *pMetaData; /* ptr to optional service-specific meta-data */ + A_UINT8 MetaDataLength; /* optional meta data length */ + HTC_EP_CALLBACKS EpCallbacks; /* endpoint callbacks */ + int MaxSendQueueDepth; /* maximum depth of any send queue */ +} HTC_SERVICE_CONNECT_REQ; + +/* service connection response information */ +typedef struct _HTC_SERVICE_CONNECT_RESP { + A_UINT8 *pMetaData; /* caller supplied buffer to optional meta-data */ + A_UINT8 BufferLength; /* length of caller supplied buffer */ + A_UINT8 ActualLength; /* actual length of meta data */ + HTC_ENDPOINT_ID Endpoint; /* endpoint to communicate over */ + int MaxMsgLength; /* max length of all messages over this endpoint */ + A_UINT8 ConnectRespCode; /* connect response code from target */ +} HTC_SERVICE_CONNECT_RESP; + +/* endpoint distribution structure */ +typedef struct _HTC_ENDPOINT_CREDIT_DIST { + struct _HTC_ENDPOINT_CREDIT_DIST *pNext; + struct _HTC_ENDPOINT_CREDIT_DIST *pPrev; + HTC_SERVICE_ID ServiceID; /* Service ID (set by HTC) */ + HTC_ENDPOINT_ID Endpoint; /* endpoint for this distribution struct (set by HTC) */ + A_UINT32 DistFlags; /* distribution flags, distribution function can + set default activity using SET_EP_ACTIVE() macro */ + int TxCreditsNorm; /* credits for normal operation, anything above this + indicates the endpoint is over-subscribed, this field + is only relevant to the credit distribution function */ + int TxCreditsMin; /* floor for credit distribution, this field is + only relevant to the credit distribution function */ + int TxCreditsAssigned; /* number of credits assigned to this EP, this field + is only relevant to the credit dist function */ + int TxCredits; /* current credits available, this field is used by + HTC to determine whether a message can be sent or + must be queued */ + int TxCreditsToDist; /* pending credits to distribute on this endpoint, this + is set by HTC when credit reports arrive. + The credit distribution functions sets this to zero + when it distributes the credits */ + int TxCreditsSeek; /* this is the number of credits that the current pending TX + packet needs to transmit. This is set by HTC when + and endpoint needs credits in order to transmit */ + int TxCreditSize; /* size in bytes of each credit (set by HTC) */ + int TxCreditsPerMaxMsg; /* credits required for a maximum sized messages (set by HTC) */ + void *pHTCReserved; /* reserved for HTC use */ +} HTC_ENDPOINT_CREDIT_DIST; + +#define HTC_EP_ACTIVE (1 << 31) + +/* macro to check if an endpoint has gone active, useful for credit + * distributions */ +#define IS_EP_ACTIVE(epDist) ((epDist)->DistFlags & HTC_EP_ACTIVE) +#define SET_EP_ACTIVE(epDist) (epDist)->DistFlags |= HTC_EP_ACTIVE + + /* credit distibution code that is passed into the distrbution function, + * there are mandatory and optional codes that must be handled */ +typedef enum _HTC_CREDIT_DIST_REASON { + HTC_CREDIT_DIST_SEND_COMPLETE = 0, /* credits available as a result of completed + send operations (MANDATORY) resulting in credit reports */ + HTC_CREDIT_DIST_ACTIVITY_CHANGE = 1, /* a change in endpoint activity occured (OPTIONAL) */ + HTC_CREDIT_DIST_SEEK_CREDITS, /* an endpoint needs to "seek" credits (OPTIONAL) */ + HTC_DUMP_CREDIT_STATE /* for debugging, dump any state information that is kept by + the distribution function */ +} HTC_CREDIT_DIST_REASON; + +typedef void (*HTC_CREDIT_DIST_CALLBACK)(void *Context, + HTC_ENDPOINT_CREDIT_DIST *pEPList, + HTC_CREDIT_DIST_REASON Reason); + +typedef void (*HTC_CREDIT_INIT_CALLBACK)(void *Context, + HTC_ENDPOINT_CREDIT_DIST *pEPList, + int TotalCredits); + + /* endpoint statistics action */ +typedef enum _HTC_ENDPOINT_STAT_ACTION { + HTC_EP_STAT_SAMPLE = 0, /* only read statistics */ + HTC_EP_STAT_SAMPLE_AND_CLEAR = 1, /* sample and immediately clear statistics */ + HTC_EP_STAT_CLEAR /* clear only */ +} HTC_ENDPOINT_STAT_ACTION; + + /* endpoint statistics */ +typedef struct _HTC_ENDPOINT_STATS { + A_UINT32 TxCreditLowIndications; /* number of times the host set the credit-low flag in a send message on + this endpoint */ + A_UINT32 TxIssued; /* running count of TX packets issued */ + A_UINT32 TxCreditRpts; /* running count of total credit reports received for this endpoint */ + A_UINT32 TxCreditRptsFromRx; + A_UINT32 TxCreditRptsFromOther; + A_UINT32 TxCreditRptsFromEp0; + A_UINT32 TxCreditsFromRx; /* count of credits received via Rx packets on this endpoint */ + A_UINT32 TxCreditsFromOther; /* count of credits received via another endpoint */ + A_UINT32 TxCreditsFromEp0; /* count of credits received via another endpoint */ + A_UINT32 TxCreditsConsummed; /* count of consummed credits */ + A_UINT32 TxCreditsReturned; /* count of credits returned */ + A_UINT32 RxReceived; /* count of RX packets received */ + A_UINT32 RxLookAheads; /* count of lookahead records + found in messages received on this endpoint */ +} HTC_ENDPOINT_STATS; + +/* ------ Function Prototypes ------ */ +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + @desc: Initialize HTC + @function name: HTCInit + @input: pInfo - initialization information + @output: + @return: A_OK on success + @notes: The caller initializes global HTC state and registers various instance + notification callbacks (see HTC_INIT_INFO). + + @example: + @see also: HTCShutdown ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +A_STATUS HTCInit(HTC_INIT_INFO *pInfo); +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + @desc: Get the underlying HIF device handle + @function name: HTCGetHifDevice + @input: HTCHandle - handle passed into the AddInstance callback + @output: + @return: opaque HIF device handle usable in HIF API calls. + @notes: + @example: + @see also: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +void *HTCGetHifDevice(HTC_HANDLE HTCHandle); +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + @desc: Set the associated instance for the HTC handle + @function name: HTCSetInstance + @input: HTCHandle - handle passed into the AddInstance callback + Instance - caller supplied instance object + @output: + @return: + @notes: Caller must set the instance information for the HTC handle in order to receive + notifications for instance deletion (DeleteInstance callback is called) and for target + failure notification. + @example: + @see also: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +void HTCSetInstance(HTC_HANDLE HTCHandle, void *Instance); +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + @desc: Set credit distribution parameters + @function name: HTCSetCreditDistribution + @input: HTCHandle - HTC handle + pCreditDistCont - caller supplied context to pass into distribution functions + CreditDistFunc - Distribution function callback + CreditDistInit - Credit Distribution initialization callback + ServicePriorityOrder - Array containing list of service IDs, lowest index is highest + priority + ListLength - number of elements in ServicePriorityOrder + @output: + @return: + @notes: The user can set a custom credit distribution function to handle special requirements + for each endpoint. A default credit distribution routine can be used by setting + CreditInitFunc to NULL. The default credit distribution is only provided for simple + "fair" credit distribution without regard to any prioritization. + + @example: + @see also: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +void HTCSetCreditDistribution(HTC_HANDLE HTCHandle, + void *pCreditDistContext, + HTC_CREDIT_DIST_CALLBACK CreditDistFunc, + HTC_CREDIT_INIT_CALLBACK CreditInitFunc, + HTC_SERVICE_ID ServicePriorityOrder[], + int ListLength); +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + @desc: Wait for the target to indicate the HTC layer is ready + @function name: HTCWaitTarget + @input: HTCHandle - HTC handle + @output: + @return: + @notes: This API blocks until the target responds with an HTC ready message. + The caller should not connect services until the target has indicated it is + ready. + @example: + @see also: HTCConnectService ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +A_STATUS HTCWaitTarget(HTC_HANDLE HTCHandle); +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + @desc: Start target service communications + @function name: HTCStart + @input: HTCHandle - HTC handle + @output: + @return: + @notes: This API indicates to the target that the service connection phase is complete + and the target can freely start all connected services. This API should only be + called AFTER all service connections have been made. TCStart will issue a + SETUP_COMPLETE message to the target to indicate that all service connections + have been made and the target can start communicating over the endpoints. + @example: + @see also: HTCConnectService ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +A_STATUS HTCStart(HTC_HANDLE HTCHandle); +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + @desc: Add receive packet to HTC + @function name: HTCAddReceivePkt + @input: HTCHandle - HTC handle + pPacket - HTC receive packet to add + @output: + @return: A_OK on success + @notes: user must supply HTC packets for capturing incomming HTC frames. The caller + must initialize each HTC packet using the SET_HTC_PACKET_INFO_RX_REFILL() + macro. + @example: + @see also: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +A_STATUS HTCAddReceivePkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket); +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + @desc: Connect to an HTC service + @function name: HTCConnectService + @input: HTCHandle - HTC handle + pReq - connection details + @output: pResp - connection response + @return: + @notes: Service connections must be performed before HTCStart. User provides callback handlers + for various endpoint events. + @example: + @see also: HTCStart ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +A_STATUS HTCConnectService(HTC_HANDLE HTCHandle, + HTC_SERVICE_CONNECT_REQ *pReq, + HTC_SERVICE_CONNECT_RESP *pResp); +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + @desc: Send an HTC packet + @function name: HTCSendPkt + @input: HTCHandle - HTC handle + pPacket - packet to send + @output: + @return: A_OK + @notes: Caller must initialize packet using SET_HTC_PACKET_INFO_TX() macro. + This interface is fully asynchronous. On error, HTC SendPkt will + call the registered Endpoint callback to cleanup the packet. + @example: + @see also: HTCFlushEndpoint ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +A_STATUS HTCSendPkt(HTC_HANDLE HTCHandle, HTC_PACKET *pPacket); +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + @desc: Stop HTC service communications + @function name: HTCStop + @input: HTCHandle - HTC handle + @output: + @return: + @notes: HTC communications is halted. All receive and pending TX packets will + be flushed. + @example: + @see also: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +void HTCStop(HTC_HANDLE HTCHandle); +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + @desc: Shutdown HTC + @function name: HTCShutdown + @input: + @output: + @return: + @notes: This cleans up all resources allocated by HTCInit(). + @example: + @see also: HTCInit ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +void HTCShutDown(void); +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + @desc: Flush pending TX packets + @function name: HTCFlushEndpoint + @input: HTCHandle - HTC handle + Endpoint - Endpoint to flush + Tag - flush tag + @output: + @return: + @notes: The Tag parameter is used to selectively flush packets with matching tags. + The value of 0 forces all packets to be flush regardless of tag. + @example: + @see also: HTCSendPkt ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +void HTCFlushEndpoint(HTC_HANDLE HTCHandle, HTC_ENDPOINT_ID Endpoint, HTC_TX_TAG Tag); +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + @desc: Dump credit distribution state + @function name: HTCDumpCreditStates + @input: HTCHandle - HTC handle + @output: + @return: + @notes: This dumps all credit distribution information to the debugger + @example: + @see also: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +void HTCDumpCreditStates(HTC_HANDLE HTCHandle); +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + @desc: Indicate a traffic activity change on an endpoint + @function name: HTCIndicateActivityChange + @input: HTCHandle - HTC handle + Endpoint - endpoint in which activity has changed + Active - TRUE if active, FALSE if it has become inactive + @output: + @return: + @notes: This triggers the registered credit distribution function to + re-adjust credits for active/inactive endpoints. + @example: + @see also: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +void HTCIndicateActivityChange(HTC_HANDLE HTCHandle, + HTC_ENDPOINT_ID Endpoint, + A_BOOL Active); + +/*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + @desc: Get endpoint statistics + @function name: HTCGetEndpointStatistics + @input: HTCHandle - HTC handle + Endpoint - Endpoint identifier + Action - action to take with statistics + @output: + pStats - statistics that were sampled (can be NULL if Action is HTC_EP_STAT_CLEAR) + + @return: TRUE if statistics profiling is enabled, otherwise FALSE. + + @notes: Statistics is a compile-time option and this function may return FALSE + if HTC is not compiled with profiling. + + The caller can specify the statistic "action" to take when sampling + the statistics. This includes: + + HTC_EP_STAT_SAMPLE: The pStats structure is filled with the current values. + HTC_EP_STAT_SAMPLE_AND_CLEAR: The structure is filled and the current statistics + are cleared. + HTC_EP_STAT_CLEA : the statistics are cleared, the called can pass a NULL value for + pStats + + @example: + @see also: ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ +A_BOOL HTCGetEndpointStatistics(HTC_HANDLE HTCHandle, + HTC_ENDPOINT_ID Endpoint, + HTC_ENDPOINT_STAT_ACTION Action, + HTC_ENDPOINT_STATS *pStats); + +#ifdef __cplusplus +} +#endif + +#endif /* _HTC_API_H_ */ diff --git a/drivers/ar6000/include/htc_packet.h b/drivers/ar6000/include/htc_packet.h new file mode 100644 index 00000000000..9ce871817e5 --- /dev/null +++ b/drivers/ar6000/include/htc_packet.h @@ -0,0 +1,138 @@ +/* + * + * Copyright (c) 2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifndef HTC_PACKET_H_ +#define HTC_PACKET_H_ + + +#include "dl_list.h" + +struct _HTC_PACKET; + +typedef void (* HTC_PACKET_COMPLETION)(void *,struct _HTC_PACKET *); + +typedef A_UINT16 HTC_TX_TAG; + +typedef struct _HTC_TX_PACKET_INFO { + HTC_TX_TAG Tag; /* tag used to selective flush packets */ +} HTC_TX_PACKET_INFO; + +#define HTC_TX_PACKET_TAG_ALL 0 /* a tag of zero is reserved and used to flush ALL packets */ +#define HTC_TX_PACKET_TAG_INTERNAL 1 /* internal tags start here */ +#define HTC_TX_PACKET_TAG_USER_DEFINED (HTC_TX_PACKET_TAG_INTERNAL + 9) /* user-defined tags start here */ + +typedef struct _HTC_RX_PACKET_INFO { + A_UINT32 Unused; /* for future use and to make compilers happy */ +} HTC_RX_PACKET_INFO; + +/* wrapper around endpoint-specific packets */ +typedef struct _HTC_PACKET { + DL_LIST ListLink; /* double link */ + void *pPktContext; /* caller's per packet specific context */ + + A_UINT8 *pBufferStart; /* the true buffer start , the caller can + store the real buffer start here. In + receive callbacks, the HTC layer sets pBuffer + to the start of the payload past the header. This + field allows the caller to reset pBuffer when it + recycles receive packets back to HTC */ + /* + * Pointer to the start of the buffer. In the transmit + * direction this points to the start of the payload. In the + * receive direction, however, the buffer when queued up + * points to the start of the HTC header but when returned + * to the caller points to the start of the payload + */ + A_UINT8 *pBuffer; /* payload start (RX/TX) */ + A_UINT32 BufferLength; /* length of buffer */ + A_UINT32 ActualLength; /* actual length of payload */ + int Endpoint; /* endpoint that this packet was sent/recv'd from */ + A_STATUS Status; /* completion status */ + union { + HTC_TX_PACKET_INFO AsTx; /* Tx Packet specific info */ + HTC_RX_PACKET_INFO AsRx; /* Rx Packet specific info */ + } PktInfo; + + /* the following fields are for internal HTC use */ + HTC_PACKET_COMPLETION Completion; /* completion */ + void *pContext; /* HTC private completion context */ + A_UINT32 HTCReserved; /* reserved */ +} HTC_PACKET; + + + +#define COMPLETE_HTC_PACKET(p,status) \ +{ \ + (p)->Status = (status); \ + (p)->Completion((p)->pContext,(p)); \ +} + +#define INIT_HTC_PACKET_INFO(p,b,len) \ +{ \ + (p)->pBufferStart = (b); \ + (p)->BufferLength = (len); \ +} + +/* macro to set an initial RX packet for refilling HTC */ +#define SET_HTC_PACKET_INFO_RX_REFILL(p,c,b,len,ep) \ +{ \ + (p)->pPktContext = (c); \ + (p)->pBuffer = (b); \ + (p)->pBufferStart = (b); \ + (p)->BufferLength = (len); \ + (p)->Endpoint = (ep); \ +} + +/* fast macro to recycle an RX packet that will be re-queued to HTC */ +#define HTC_PACKET_RESET_RX(p) \ + (p)->pBuffer = (p)->pBufferStart + +/* macro to set packet parameters for TX */ +#define SET_HTC_PACKET_INFO_TX(p,c,b,len,ep,tag) \ +{ \ + (p)->pPktContext = (c); \ + (p)->pBuffer = (b); \ + (p)->ActualLength = (len); \ + (p)->Endpoint = (ep); \ + (p)->PktInfo.AsTx.Tag = (tag); \ +} + +/* HTC Packet Queueing Macros */ +typedef DL_LIST HTC_PACKET_QUEUE; +/* initialize queue */ +#define INIT_HTC_PACKET_QUEUE(pQ) DL_LIST_INIT((pQ)) +/* enqueue HTC packet to the tail of the queue */ +#define HTC_PACKET_ENQUEUE(pQ,p) DL_ListInsertTail((pQ),&(p)->ListLink) +/* test if a queue is empty */ +#define HTC_QUEUE_EMPTY(pQ) DL_LIST_IS_EMPTY((pQ)) +/* get packet at head without removing it */ +#define HTC_GET_PKT_AT_HEAD(pQ) A_CONTAINING_STRUCT((DL_LIST_GET_ITEM_AT_HEAD(pQ)),HTC_PACKET,ListLink); +/* remove a packet from the current list it is linked to */ +#define HTC_PACKET_REMOVE(p) DL_ListRemove(&(p)->ListLink) + +/* dequeue an HTC packet from the head of the queue */ +static INLINE HTC_PACKET *HTC_PACKET_DEQUEUE(HTC_PACKET_QUEUE *queue) { + DL_LIST *pItem = DL_ListRemoveItemFromHead(queue); + if (pItem != NULL) { + return A_CONTAINING_STRUCT(pItem, HTC_PACKET, ListLink); + } + return NULL; +} + +#endif /*HTC_PACKET_H_*/ diff --git a/drivers/ar6000/include/htc_services.h b/drivers/ar6000/include/htc_services.h new file mode 100644 index 00000000000..fc6fc296625 --- /dev/null +++ b/drivers/ar6000/include/htc_services.h @@ -0,0 +1,37 @@ +/* + * Copyright (c) 2007 Atheros Communications Inc. + * All rights reserved. + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + */ + +#ifndef __HTC_SERVICES_H__ +#define __HTC_SERVICES_H__ + +/* Current service IDs */ + +typedef enum { + RSVD_SERVICE_GROUP = 0, + WMI_SERVICE_GROUP = 1, + + HTC_TEST_GROUP = 254, + HTC_SERVICE_GROUP_LAST = 255 +}HTC_SERVICE_GROUP_IDS; + +#define MAKE_SERVICE_ID(group,index) \ + (int)(((int)group << 8) | (int)(index)) + +/* NOTE: service ID of 0x0000 is reserved and should never be used */ +#define HTC_CTRL_RSVD_SVC MAKE_SERVICE_ID(RSVD_SERVICE_GROUP,1) +#define WMI_CONTROL_SVC MAKE_SERVICE_ID(WMI_SERVICE_GROUP,0) +#define WMI_DATA_BE_SVC MAKE_SERVICE_ID(WMI_SERVICE_GROUP,1) +#define WMI_DATA_BK_SVC MAKE_SERVICE_ID(WMI_SERVICE_GROUP,2) +#define WMI_DATA_VI_SVC MAKE_SERVICE_ID(WMI_SERVICE_GROUP,3) +#define WMI_DATA_VO_SVC MAKE_SERVICE_ID(WMI_SERVICE_GROUP,4) +#define WMI_MAX_SERVICES 5 + +/* raw stream service (i.e. flash, tcmd, calibration apps) */ +#define HTC_RAW_STREAMS_SVC MAKE_SERVICE_ID(HTC_TEST_GROUP,0) + +#endif /*HTC_SERVICES_H_*/ diff --git a/drivers/ar6000/include/ieee80211.h b/drivers/ar6000/include/ieee80211.h new file mode 100644 index 00000000000..7090040249e --- /dev/null +++ b/drivers/ar6000/include/ieee80211.h @@ -0,0 +1,342 @@ +/*- + * Copyright (c) 2001 Atsushi Onoe + * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting + * Copyright (c) 2006 Atheros Communications, Inc. + * + * Wireless Network driver for Atheros AR6001 + * All rights reserved. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef _NET80211_IEEE80211_H_ +#define _NET80211_IEEE80211_H_ + +#include "athstartpack.h" + +/* + * 802.11 protocol definitions. + */ + +#define IEEE80211_ADDR_LEN 6 /* size of 802.11 address */ +/* is 802.11 address multicast/broadcast? */ +#define IEEE80211_IS_MULTICAST(_a) (*(_a) & 0x01) +#define IEEE80211_ADDR_EQ(addr1, addr2) \ + (A_MEMCMP(addr1, addr2, IEEE80211_ADDR_LEN) == 0) + +#define IEEE80211_KEYBUF_SIZE 16 +#define IEEE80211_MICBUF_SIZE (8+8) /* space for both tx and rx */ + +/* + * NB: these values are ordered carefully; there are lots of + * of implications in any reordering. In particular beware + * that 4 is not used to avoid conflicting with IEEE80211_F_PRIVACY. + */ +#define IEEE80211_CIPHER_WEP 0 +#define IEEE80211_CIPHER_TKIP 1 +#define IEEE80211_CIPHER_AES_OCB 2 +#define IEEE80211_CIPHER_AES_CCM 3 +#define IEEE80211_CIPHER_CKIP 5 +#define IEEE80211_CIPHER_CCKM_KRK 6 +#define IEEE80211_CIPHER_NONE 7 /* pseudo value */ + +#define IEEE80211_CIPHER_MAX (IEEE80211_CIPHER_NONE+1) + +#define IEEE80211_IS_VALID_WEP_CIPHER_LEN(len) \ + (((len) == 5) || ((len) == 13) || ((len) == 16)) + + + +/* + * generic definitions for IEEE 802.11 frames + */ +PREPACK struct ieee80211_frame { + A_UINT8 i_fc[2]; + A_UINT8 i_dur[2]; + A_UINT8 i_addr1[IEEE80211_ADDR_LEN]; + A_UINT8 i_addr2[IEEE80211_ADDR_LEN]; + A_UINT8 i_addr3[IEEE80211_ADDR_LEN]; + A_UINT8 i_seq[2]; + /* possibly followed by addr4[IEEE80211_ADDR_LEN]; */ + /* see below */ +} POSTPACK; + +#define IEEE80211_FC0_VERSION_MASK 0x03 +#define IEEE80211_FC0_VERSION_SHIFT 0 +#define IEEE80211_FC0_VERSION_0 0x00 +#define IEEE80211_FC0_TYPE_MASK 0x0c +#define IEEE80211_FC0_TYPE_SHIFT 2 +#define IEEE80211_FC0_TYPE_MGT 0x00 +#define IEEE80211_FC0_TYPE_CTL 0x04 +#define IEEE80211_FC0_TYPE_DATA 0x08 + +#define IEEE80211_FC0_SUBTYPE_MASK 0xf0 +#define IEEE80211_FC0_SUBTYPE_SHIFT 4 +/* for TYPE_MGT */ +#define IEEE80211_FC0_SUBTYPE_ASSOC_REQ 0x00 +#define IEEE80211_FC0_SUBTYPE_ASSOC_RESP 0x10 +#define IEEE80211_FC0_SUBTYPE_REASSOC_REQ 0x20 +#define IEEE80211_FC0_SUBTYPE_REASSOC_RESP 0x30 +#define IEEE80211_FC0_SUBTYPE_PROBE_REQ 0x40 +#define IEEE80211_FC0_SUBTYPE_PROBE_RESP 0x50 +#define IEEE80211_FC0_SUBTYPE_BEACON 0x80 +#define IEEE80211_FC0_SUBTYPE_ATIM 0x90 +#define IEEE80211_FC0_SUBTYPE_DISASSOC 0xa0 +#define IEEE80211_FC0_SUBTYPE_AUTH 0xb0 +#define IEEE80211_FC0_SUBTYPE_DEAUTH 0xc0 +/* for TYPE_CTL */ +#define IEEE80211_FC0_SUBTYPE_PS_POLL 0xa0 +#define IEEE80211_FC0_SUBTYPE_RTS 0xb0 +#define IEEE80211_FC0_SUBTYPE_CTS 0xc0 +#define IEEE80211_FC0_SUBTYPE_ACK 0xd0 +#define IEEE80211_FC0_SUBTYPE_CF_END 0xe0 +#define IEEE80211_FC0_SUBTYPE_CF_END_ACK 0xf0 +/* for TYPE_DATA (bit combination) */ +#define IEEE80211_FC0_SUBTYPE_DATA 0x00 +#define IEEE80211_FC0_SUBTYPE_CF_ACK 0x10 +#define IEEE80211_FC0_SUBTYPE_CF_POLL 0x20 +#define IEEE80211_FC0_SUBTYPE_CF_ACPL 0x30 +#define IEEE80211_FC0_SUBTYPE_NODATA 0x40 +#define IEEE80211_FC0_SUBTYPE_CFACK 0x50 +#define IEEE80211_FC0_SUBTYPE_CFPOLL 0x60 +#define IEEE80211_FC0_SUBTYPE_CF_ACK_CF_ACK 0x70 +#define IEEE80211_FC0_SUBTYPE_QOS 0x80 +#define IEEE80211_FC0_SUBTYPE_QOS_NULL 0xc0 + +#define IEEE80211_FC1_DIR_MASK 0x03 +#define IEEE80211_FC1_DIR_NODS 0x00 /* STA->STA */ +#define IEEE80211_FC1_DIR_TODS 0x01 /* STA->AP */ +#define IEEE80211_FC1_DIR_FROMDS 0x02 /* AP ->STA */ +#define IEEE80211_FC1_DIR_DSTODS 0x03 /* AP ->AP */ + +#define IEEE80211_FC1_MORE_FRAG 0x04 +#define IEEE80211_FC1_RETRY 0x08 +#define IEEE80211_FC1_PWR_MGT 0x10 +#define IEEE80211_FC1_MORE_DATA 0x20 +#define IEEE80211_FC1_WEP 0x40 +#define IEEE80211_FC1_ORDER 0x80 + +#define IEEE80211_SEQ_FRAG_MASK 0x000f +#define IEEE80211_SEQ_FRAG_SHIFT 0 +#define IEEE80211_SEQ_SEQ_MASK 0xfff0 +#define IEEE80211_SEQ_SEQ_SHIFT 4 + +#define IEEE80211_NWID_LEN 32 + +/* + * 802.11 rate set. + */ +#define IEEE80211_RATE_SIZE 8 /* 802.11 standard */ +#define IEEE80211_RATE_MAXSIZE 15 /* max rates we'll handle */ + +#define WMM_NUM_AC 4 /* 4 AC categories */ + +#define WMM_PARAM_ACI_M 0x60 /* Mask for ACI field */ +#define WMM_PARAM_ACI_S 5 /* Shift for ACI field */ +#define WMM_PARAM_ACM_M 0x10 /* Mask for ACM bit */ +#define WMM_PARAM_ACM_S 4 /* Shift for ACM bit */ +#define WMM_PARAM_AIFSN_M 0x0f /* Mask for aifsn field */ +#define WMM_PARAM_LOGCWMIN_M 0x0f /* Mask for CwMin field (in log) */ +#define WMM_PARAM_LOGCWMAX_M 0xf0 /* Mask for CwMax field (in log) */ +#define WMM_PARAM_LOGCWMAX_S 4 /* Shift for CwMax field */ + +#define WMM_AC_TO_TID(_ac) ( \ + ((_ac) == WMM_AC_VO) ? 6 : \ + ((_ac) == WMM_AC_VI) ? 5 : \ + ((_ac) == WMM_AC_BK) ? 1 : \ + 0) + +#define TID_TO_WMM_AC(_tid) ( \ + ((_tid) < 1) ? WMM_AC_BE : \ + ((_tid) < 3) ? WMM_AC_BK : \ + ((_tid) < 6) ? WMM_AC_VI : \ + WMM_AC_VO) +/* + * Management information element payloads. + */ + +enum { + IEEE80211_ELEMID_SSID = 0, + IEEE80211_ELEMID_RATES = 1, + IEEE80211_ELEMID_FHPARMS = 2, + IEEE80211_ELEMID_DSPARMS = 3, + IEEE80211_ELEMID_CFPARMS = 4, + IEEE80211_ELEMID_TIM = 5, + IEEE80211_ELEMID_IBSSPARMS = 6, + IEEE80211_ELEMID_COUNTRY = 7, + IEEE80211_ELEMID_CHALLENGE = 16, + /* 17-31 reserved for challenge text extension */ + IEEE80211_ELEMID_PWRCNSTR = 32, + IEEE80211_ELEMID_PWRCAP = 33, + IEEE80211_ELEMID_TPCREQ = 34, + IEEE80211_ELEMID_TPCREP = 35, + IEEE80211_ELEMID_SUPPCHAN = 36, + IEEE80211_ELEMID_CHANSWITCH = 37, + IEEE80211_ELEMID_MEASREQ = 38, + IEEE80211_ELEMID_MEASREP = 39, + IEEE80211_ELEMID_QUIET = 40, + IEEE80211_ELEMID_IBSSDFS = 41, + IEEE80211_ELEMID_ERP = 42, + IEEE80211_ELEMID_RSN = 48, + IEEE80211_ELEMID_XRATES = 50, + IEEE80211_ELEMID_TPC = 150, + IEEE80211_ELEMID_CCKM = 156, + IEEE80211_ELEMID_VENDOR = 221, /* vendor private */ +}; + +#define ATH_OUI 0x7f0300 /* Atheros OUI */ +#define ATH_OUI_TYPE 0x01 +#define ATH_OUI_SUBTYPE 0x01 +#define ATH_OUI_VERSION 0x00 + +#define WPA_OUI 0xf25000 +#define WPA_OUI_TYPE 0x01 +#define WPA_VERSION 1 /* current supported version */ + +#define WPA_CSE_NULL 0x00 +#define WPA_CSE_WEP40 0x01 +#define WPA_CSE_TKIP 0x02 +#define WPA_CSE_CCMP 0x04 +#define WPA_CSE_WEP104 0x05 + +#define WPA_ASE_NONE 0x00 +#define WPA_ASE_8021X_UNSPEC 0x01 +#define WPA_ASE_8021X_PSK 0x02 + +#define RSN_OUI 0xac0f00 +#define RSN_VERSION 1 /* current supported version */ + +#define RSN_CSE_NULL 0x00 +#define RSN_CSE_WEP40 0x01 +#define RSN_CSE_TKIP 0x02 +#define RSN_CSE_WRAP 0x03 +#define RSN_CSE_CCMP 0x04 +#define RSN_CSE_WEP104 0x05 + +#define RSN_ASE_NONE 0x00 +#define RSN_ASE_8021X_UNSPEC 0x01 +#define RSN_ASE_8021X_PSK 0x02 + +#define RSN_CAP_PREAUTH 0x01 + +#define WMM_OUI 0xf25000 +#define WMM_OUI_TYPE 0x02 +#define WMM_INFO_OUI_SUBTYPE 0x00 +#define WMM_PARAM_OUI_SUBTYPE 0x01 +#define WMM_VERSION 1 + +/* WMM stream classes */ +#define WMM_NUM_AC 4 +#define WMM_AC_BE 0 /* best effort */ +#define WMM_AC_BK 1 /* background */ +#define WMM_AC_VI 2 /* video */ +#define WMM_AC_VO 3 /* voice */ + +/* TSPEC related */ +#define ACTION_CATEGORY_CODE_TSPEC 17 +#define ACTION_CODE_TSPEC_ADDTS 0 +#define ACTION_CODE_TSPEC_ADDTS_RESP 1 +#define ACTION_CODE_TSPEC_DELTS 2 + +typedef enum { + TSPEC_STATUS_CODE_ADMISSION_ACCEPTED = 0, + TSPEC_STATUS_CODE_ADDTS_INVALID_PARAMS = 0x1, + TSPEC_STATUS_CODE_ADDTS_REQUEST_REFUSED = 0x3, + TSPEC_STATUS_CODE_UNSPECIFIED_QOS_RELATED_FAILURE = 0xC8, + TSPEC_STATUS_CODE_REQUESTED_REFUSED_POLICY_CONFIGURATION = 0xC9, + TSPEC_STATUS_CODE_INSUFFCIENT_BANDWIDTH = 0xCA, + TSPEC_STATUS_CODE_INVALID_PARAMS = 0xCB, + TSPEC_STATUS_CODE_DELTS_SENT = 0x30, + TSPEC_STATUS_CODE_DELTS_RECV = 0x31, +} TSPEC_STATUS_CODE; + +/* + * WMM/802.11e Tspec Element + */ +typedef PREPACK struct wmm_tspec_ie_t { + A_UINT8 elementId; + A_UINT8 len; + A_UINT8 oui[3]; + A_UINT8 ouiType; + A_UINT8 ouiSubType; + A_UINT8 version; + A_UINT16 tsInfo_info; + A_UINT8 tsInfo_reserved; + A_UINT16 nominalMSDU; + A_UINT16 maxMSDU; + A_UINT32 minServiceInt; + A_UINT32 maxServiceInt; + A_UINT32 inactivityInt; + A_UINT32 suspensionInt; + A_UINT32 serviceStartTime; + A_UINT32 minDataRate; + A_UINT32 meanDataRate; + A_UINT32 peakDataRate; + A_UINT32 maxBurstSize; + A_UINT32 delayBound; + A_UINT32 minPhyRate; + A_UINT16 sba; + A_UINT16 mediumTime; +} POSTPACK WMM_TSPEC_IE; + + +/* + * BEACON management packets + * + * octet timestamp[8] + * octet beacon interval[2] + * octet capability information[2] + * information element + * octet elemid + * octet length + * octet information[length] + */ + +#define IEEE80211_BEACON_INTERVAL(beacon) \ + ((beacon)[8] | ((beacon)[9] << 8)) +#define IEEE80211_BEACON_CAPABILITY(beacon) \ + ((beacon)[10] | ((beacon)[11] << 8)) + +#define IEEE80211_CAPINFO_ESS 0x0001 +#define IEEE80211_CAPINFO_IBSS 0x0002 +#define IEEE80211_CAPINFO_CF_POLLABLE 0x0004 +#define IEEE80211_CAPINFO_CF_POLLREQ 0x0008 +#define IEEE80211_CAPINFO_PRIVACY 0x0010 +#define IEEE80211_CAPINFO_SHORT_PREAMBLE 0x0020 +#define IEEE80211_CAPINFO_PBCC 0x0040 +#define IEEE80211_CAPINFO_CHNL_AGILITY 0x0080 +/* bits 8-9 are reserved */ +#define IEEE80211_CAPINFO_SHORT_SLOTTIME 0x0400 +#define IEEE80211_CAPINFO_APSD 0x0800 +/* bit 12 is reserved */ +#define IEEE80211_CAPINFO_DSSSOFDM 0x2000 +/* bits 14-15 are reserved */ + +/* + * Authentication Modes + */ + +enum ieee80211_authmode { + IEEE80211_AUTH_NONE = 0, + IEEE80211_AUTH_OPEN = 1, + IEEE80211_AUTH_SHARED = 2, + IEEE80211_AUTH_8021X = 3, + IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */ + /* NB: these are used only for ioctls */ + IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x */ + IEEE80211_AUTH_WPA_PSK = 6, /* WPA/RSN w/ PSK */ + IEEE80211_AUTH_WPA_CCKM = 7, /* WPA/RSN IE w/ CCKM */ +}; + +#include "athendpack.h" + +#endif /* _NET80211_IEEE80211_H_ */ diff --git a/drivers/ar6000/include/ieee80211_ioctl.h b/drivers/ar6000/include/ieee80211_ioctl.h new file mode 100644 index 00000000000..dab6747c496 --- /dev/null +++ b/drivers/ar6000/include/ieee80211_ioctl.h @@ -0,0 +1,163 @@ +/* + * Copyright (c) 2004-2005 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + * + * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/ieee80211_ioctl.h#1 $ + */ + +#ifndef _IEEE80211_IOCTL_H_ +#define _IEEE80211_IOCTL_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Extracted from the MADWIFI net80211/ieee80211_ioctl.h + */ + +/* + * WPA/RSN get/set key request. Specify the key/cipher + * type and whether the key is to be used for sending and/or + * receiving. The key index should be set only when working + * with global keys (use IEEE80211_KEYIX_NONE for ``no index''). + * Otherwise a unicast/pairwise key is specified by the bssid + * (on a station) or mac address (on an ap). They key length + * must include any MIC key data; otherwise it should be no + more than IEEE80211_KEYBUF_SIZE. + */ +struct ieee80211req_key { + u_int8_t ik_type; /* key/cipher type */ + u_int8_t ik_pad; + u_int16_t ik_keyix; /* key index */ + u_int8_t ik_keylen; /* key length in bytes */ + u_int8_t ik_flags; +#define IEEE80211_KEY_XMIT 0x01 +#define IEEE80211_KEY_RECV 0x02 +#define IEEE80211_KEY_DEFAULT 0x80 /* default xmit key */ + u_int8_t ik_macaddr[IEEE80211_ADDR_LEN]; + u_int64_t ik_keyrsc; /* key receive sequence counter */ + u_int64_t ik_keytsc; /* key transmit sequence counter */ + u_int8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE]; +}; +/* + * Delete a key either by index or address. Set the index + * to IEEE80211_KEYIX_NONE when deleting a unicast key. + */ +struct ieee80211req_del_key { + u_int8_t idk_keyix; /* key index */ + u_int8_t idk_macaddr[IEEE80211_ADDR_LEN]; +}; +/* + * MLME state manipulation request. IEEE80211_MLME_ASSOC + * only makes sense when operating as a station. The other + * requests can be used when operating as a station or an + * ap (to effect a station). + */ +struct ieee80211req_mlme { + u_int8_t im_op; /* operation to perform */ +#define IEEE80211_MLME_ASSOC 1 /* associate station */ +#define IEEE80211_MLME_DISASSOC 2 /* disassociate station */ +#define IEEE80211_MLME_DEAUTH 3 /* deauthenticate station */ +#define IEEE80211_MLME_AUTHORIZE 4 /* authorize station */ +#define IEEE80211_MLME_UNAUTHORIZE 5 /* unauthorize station */ + u_int16_t im_reason; /* 802.11 reason code */ + u_int8_t im_macaddr[IEEE80211_ADDR_LEN]; +}; + +struct ieee80211req_addpmkid { + u_int8_t pi_bssid[IEEE80211_ADDR_LEN]; + u_int8_t pi_enable; + u_int8_t pi_pmkid[16]; +}; + +#define AUTH_ALG_OPEN_SYSTEM 0x01 +#define AUTH_ALG_SHARED_KEY 0x02 +#define AUTH_ALG_LEAP 0x04 + +struct ieee80211req_authalg { + u_int8_t auth_alg; +}; + +/* + * Request to add an IE to a Management Frame + */ +enum{ + IEEE80211_APPIE_FRAME_BEACON = 0, + IEEE80211_APPIE_FRAME_PROBE_REQ = 1, + IEEE80211_APPIE_FRAME_PROBE_RESP = 2, + IEEE80211_APPIE_FRAME_ASSOC_REQ = 3, + IEEE80211_APPIE_FRAME_ASSOC_RESP = 4, + IEEE80211_APPIE_NUM_OF_FRAME = 5 +}; + +/* + * The Maximum length of the IE that can be added to a Management frame + */ +#define IEEE80211_APPIE_FRAME_MAX_LEN 78 + +struct ieee80211req_getset_appiebuf { + u_int32_t app_frmtype; /* management frame type for which buffer is added */ + u_int32_t app_buflen; /*application supplied buffer length */ + u_int8_t app_buf[]; +}; + +/* + * The following definitions are used by an application to set filter + * for receiving management frames + */ +enum { + IEEE80211_FILTER_TYPE_BEACON = 0x1, + IEEE80211_FILTER_TYPE_PROBE_REQ = 0x2, + IEEE80211_FILTER_TYPE_PROBE_RESP = 0x4, + IEEE80211_FILTER_TYPE_ASSOC_REQ = 0x8, + IEEE80211_FILTER_TYPE_ASSOC_RESP = 0x10, + IEEE80211_FILTER_TYPE_AUTH = 0x20, + IEEE80211_FILTER_TYPE_DEAUTH = 0x40, + IEEE80211_FILTER_TYPE_DISASSOC = 0x80, + IEEE80211_FILTER_TYPE_ALL = 0xFF /* used to check the valid filter bits */ +}; + +struct ieee80211req_set_filter { + u_int32_t app_filterype; /* management frame filter type */ +}; + +enum { + IEEE80211_PARAM_AUTHMODE = 3, /* Authentication Mode */ + IEEE80211_PARAM_MCASTCIPHER = 5, + IEEE80211_PARAM_MCASTKEYLEN = 6, /* multicast key length */ + IEEE80211_PARAM_UCASTCIPHER = 8, + IEEE80211_PARAM_UCASTKEYLEN = 9, /* unicast key length */ + IEEE80211_PARAM_WPA = 10, /* WPA mode (0,1,2) */ + IEEE80211_PARAM_ROAMING = 12, /* roaming mode */ + IEEE80211_PARAM_PRIVACY = 13, /* privacy invoked */ + IEEE80211_PARAM_COUNTERMEASURES = 14, /* WPA/TKIP countermeasures */ + IEEE80211_PARAM_DROPUNENCRYPTED = 15, /* discard unencrypted frames */ +}; + +/* + * Values for IEEE80211_PARAM_WPA + */ +#define WPA_MODE_WPA1 1 +#define WPA_MODE_WPA2 2 +#define WPA_MODE_AUTO 3 +#define WPA_MODE_NONE 4 + +#ifdef __cplusplus +} +#endif + +#endif /* _IEEE80211_IOCTL_H_ */ diff --git a/drivers/ar6000/include/ieee80211_node.h b/drivers/ar6000/include/ieee80211_node.h new file mode 100644 index 00000000000..46b613c09c6 --- /dev/null +++ b/drivers/ar6000/include/ieee80211_node.h @@ -0,0 +1,77 @@ +/*- + * Copyright (c) 2001 Atsushi Onoe + * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting + * Copyright (c) 2006 Atheros Communications, Inc. + * + * Wireless Network driver for Atheros AR6001 + * All rights reserved. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef _IEEE80211_NODE_H_ +#define _IEEE80211_NODE_H_ + +/* + * Node locking definitions. + */ +#define IEEE80211_NODE_LOCK_INIT(_nt) A_MUTEX_INIT(&(_nt)->nt_nodelock) +#define IEEE80211_NODE_LOCK_DESTROY(_nt) +#define IEEE80211_NODE_LOCK(_nt) A_MUTEX_LOCK(&(_nt)->nt_nodelock) +#define IEEE80211_NODE_UNLOCK(_nt) A_MUTEX_UNLOCK(&(_nt)->nt_nodelock) +#define IEEE80211_NODE_LOCK_BH(_nt) A_MUTEX_LOCK(&(_nt)->nt_nodelock) +#define IEEE80211_NODE_UNLOCK_BH(_nt) A_MUTEX_UNLOCK(&(_nt)->nt_nodelock) +#define IEEE80211_NODE_LOCK_ASSERT(_nt) + +/* + * Node reference counting definitions. + * + * ieee80211_node_initref initialize the reference count to 1 + * ieee80211_node_incref add a reference + * ieee80211_node_decref remove a reference + * ieee80211_node_dectestref remove a reference and return 1 if this + * is the last reference, otherwise 0 + * ieee80211_node_refcnt reference count for printing (only) + */ +#define ieee80211_node_initref(_ni) ((_ni)->ni_refcnt = 1) +#define ieee80211_node_incref(_ni) ((_ni)->ni_refcnt++) +#define ieee80211_node_decref(_ni) ((_ni)->ni_refcnt--) +#define ieee80211_node_dectestref(_ni) (((_ni)->ni_refcnt--) == 0) +#define ieee80211_node_refcnt(_ni) ((_ni)->ni_refcnt) + +#define IEEE80211_NODE_HASHSIZE 32 +/* simple hash is enough for variation of macaddr */ +#define IEEE80211_NODE_HASH(addr) \ + (((const A_UINT8 *)(addr))[IEEE80211_ADDR_LEN - 1] % \ + IEEE80211_NODE_HASHSIZE) + +/* + * Table of ieee80211_node instances. Each ieee80211com + * has at least one for holding the scan candidates. + * When operating as an access point or in ibss mode there + * is a second table for associated stations or neighbors. + */ +struct ieee80211_node_table { + void *nt_wmip; /* back reference */ + A_MUTEX_T nt_nodelock; /* on node table */ + struct bss *nt_node_first; /* information of all nodes */ + struct bss *nt_node_last; /* information of all nodes */ + struct bss *nt_hash[IEEE80211_NODE_HASHSIZE]; + const char *nt_name; /* for debugging */ + A_UINT32 nt_scangen; /* gen# for timeout scan */ + A_TIMER nt_inact_timer; + A_UINT8 isTimerArmed; /* is the node timer armed */ +}; + +#define WLAN_NODE_INACT_TIMEOUT_MSEC 10000 + +#endif /* _IEEE80211_NODE_H_ */ diff --git a/drivers/ar6000/include/ini_dset.h b/drivers/ar6000/include/ini_dset.h new file mode 100644 index 00000000000..410f2b52597 --- /dev/null +++ b/drivers/ar6000/include/ini_dset.h @@ -0,0 +1,40 @@ +/* + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + */ +#ifndef _INI_DSET_H_ +#define _INI_DSET_H_ + +/* + * Each of these represents a WHAL INI table, which consists + * of an "address column" followed by 1 or more "value columns". + * + * Software uses the base WHAL_INI_DATA_ID+column to access a + * DataSet that holds a particular column of data. + */ +typedef enum { + WHAL_INI_DATA_ID_NULL =0, + WHAL_INI_DATA_ID_MODE_SPECIFIC =1, /* 2,3 */ + WHAL_INI_DATA_ID_COMMON =4, /* 5 */ + WHAL_INI_DATA_ID_BB_RFGAIN =6, /* 7,8 */ + WHAL_INI_DATA_ID_ANALOG_BANK1 =9, /* 10 */ + WHAL_INI_DATA_ID_ANALOG_BANK2 =11, /* 12 */ + WHAL_INI_DATA_ID_ANALOG_BANK3 =13, /* 14, 15 */ + WHAL_INI_DATA_ID_ANALOG_BANK6 =16, /* 17, 18 */ + WHAL_INI_DATA_ID_ANALOG_BANK7 =19, /* 20 */ + WHAL_INI_DATA_ID_MODE_OVERRIDES =21, /* 22,23 */ + WHAL_INI_DATA_ID_COMMON_OVERRIDES =24, /* 25 */ + + WHAL_INI_DATA_ID_MAX =25 +} WHAL_INI_DATA_ID; + +typedef PREPACK struct { + A_UINT16 freqIndex; // 1 - A mode 2 - B or G mode 0 - common + A_UINT16 offset; + A_UINT32 newValue; +} POSTPACK INI_DSET_REG_OVERRIDE; + +#endif diff --git a/drivers/ar6000/include/regDb.h b/drivers/ar6000/include/regDb.h new file mode 100644 index 00000000000..b3f665ff5f2 --- /dev/null +++ b/drivers/ar6000/include/regDb.h @@ -0,0 +1,19 @@ +/* + * Copyright (c) 2005 Atheros Communications, Inc. + * All rights reserved. + * + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + * This module contains the header files for regulatory module, + * which include the DB schema and DB values. + * $Id: + */ + +#ifndef __REG_DB_H__ +#define __REG_DB_H__ + +#include "./regulatory/reg_dbschema.h" +#include "./regulatory/reg_dbvalues.h" + +#endif /* __REG_DB_H__ */ diff --git a/drivers/ar6000/include/regdump.h b/drivers/ar6000/include/regdump.h new file mode 100644 index 00000000000..0106825ce27 --- /dev/null +++ b/drivers/ar6000/include/regdump.h @@ -0,0 +1,33 @@ +#ifndef __REGDUMP_H__ +#define __REGDUMP_H__ +/* + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + */ +#if defined(AR6001) +#include "AR6001/AR6001_regdump.h" +#endif +#if defined(AR6002) +#include "AR6002/AR6002_regdump.h" +#endif + +#if !defined(__ASSEMBLER__) +/* + * Target CPU state at the time of failure is reflected + * in a register dump, which the Host can fetch through + * the diagnostic window. + */ +struct register_dump_s { + A_UINT32 target_id; /* Target ID */ + A_UINT32 assline; /* Line number (if assertion failure) */ + A_UINT32 pc; /* Program Counter at time of exception */ + A_UINT32 badvaddr; /* Virtual address causing exception */ + CPU_exception_frame_t exc_frame; /* CPU-specific exception info */ + + /* Could copy top of stack here, too.... */ +}; +#endif /* __ASSEMBLER__ */ +#endif /* __REGDUMP_H__ */ diff --git a/drivers/ar6000/include/targaddrs.h b/drivers/ar6000/include/targaddrs.h new file mode 100644 index 00000000000..da2a6509020 --- /dev/null +++ b/drivers/ar6000/include/targaddrs.h @@ -0,0 +1,158 @@ +/* + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + */ + +#ifndef __TARGADDRS_H__ +#define __TARGADDRS_H__ +#if defined(AR6001) +#include "AR6001/addrs.h" +#endif +#if defined(AR6002) +#include "AR6002/addrs.h" +#endif + +/* + * AR6K option bits, to enable/disable various features. + * By default, all option bits are 0. + * These bits can be set in LOCAL_SCRATCH register 0. + */ +#define AR6K_OPTION_BMI_DISABLE 0x01 /* Disable BMI comm with Host */ +#define AR6K_OPTION_SERIAL_ENABLE 0x02 /* Enable serial port msgs */ +#define AR6K_OPTION_WDT_DISABLE 0x04 /* WatchDog Timer override */ +#define AR6K_OPTION_SLEEP_DISABLE 0x08 /* Disable system sleep */ +#define AR6K_OPTION_STOP_BOOT 0x10 /* Stop boot processes (for ATE) */ +#define AR6K_OPTION_ENABLE_NOANI 0x20 /* Operate without ANI */ +#define AR6K_OPTION_DSET_DISABLE 0x40 /* Ignore DataSets */ +#define AR6K_OPTION_IGNORE_FLASH 0x80 /* Ignore flash during bootup */ + +/* + * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the + * host_interest structure. It must match the address of the _host_interest + * symbol (see linker script). + * + * Host Interest is shared between Host and Target in order to coordinate + * between the two, and is intended to remain constant (with additions only + * at the end) across software releases. + */ +#define AR6001_HOST_INTEREST_ADDRESS 0x80000600 +#define AR6002_HOST_INTEREST_ADDRESS 0x00500400 + +#define HOST_INTEREST_MAX_SIZE 0x100 + +#if !defined(__ASSEMBLER__) +struct register_dump_s; +struct dbglog_hdr_s; + +/* + * These are items that the Host may need to access + * via BMI or via the Diagnostic Window. The position + * of items in this structure must remain constant + * across firmware revisions! + * + * Types for each item must be fixed size across + * target and host platforms. + * + * More items may be added at the end. + */ +struct host_interest_s { + /* + * Pointer to application-defined area, if any. + * Set by Target application during startup. + */ + A_UINT32 hi_app_host_interest; /* 0x00 */ + + /* Pointer to register dump area, valid after Target crash. */ + A_UINT32 hi_failure_state; /* 0x04 */ + + /* Pointer to debug logging header */ + A_UINT32 hi_dbglog_hdr; /* 0x08 */ + + /* Indicates whether or not flash is present on Target. + * NB: flash_is_present indicator is here not just + * because it might be of interest to the Host; but + * also because it's set early on by Target's startup + * asm code and we need it to have a special RAM address + * so that it doesn't get reinitialized with the rest + * of data. + */ + A_UINT32 hi_flash_is_present; /* 0x0c */ + + /* + * General-purpose flag bits, similar to AR6000_OPTION_* flags. + * Can be used by application rather than by OS. + */ + A_UINT32 hi_option_flag; /* 0x10 */ + + /* + * Boolean that determines whether or not to + * display messages on the serial port. + */ + A_UINT32 hi_serial_enable; /* 0x14 */ + + /* Start address of Flash DataSet index, if any */ + A_UINT32 hi_dset_list_head; /* 0x18 */ + + /* Override Target application start address */ + A_UINT32 hi_app_start; /* 0x1c */ + + /* Clock and voltage tuning */ + A_UINT32 hi_skip_clock_init; /* 0x20 */ + A_UINT32 hi_core_clock_setting; /* 0x24 */ + A_UINT32 hi_cpu_clock_setting; /* 0x28 */ + A_UINT32 hi_system_sleep_setting; /* 0x2c */ + A_UINT32 hi_xtal_control_setting; /* 0x30 */ + A_UINT32 hi_pll_ctrl_setting_24ghz; /* 0x34 */ + A_UINT32 hi_pll_ctrl_setting_5ghz; /* 0x38 */ + A_UINT32 hi_ref_voltage_trim_setting; /* 0x3c */ + A_UINT32 hi_clock_info; /* 0x40 */ + + /* + * Flash configuration overrides, used only + * when firmware is not executing from flash. + * (When using flash, modify the global variables + * with equivalent names.) + */ + A_UINT32 hi_bank0_addr_value; /* 0x44 */ + A_UINT32 hi_bank0_read_value; /* 0x48 */ + A_UINT32 hi_bank0_write_value; /* 0x4c */ + A_UINT32 hi_bank0_config_value; /* 0x50 */ + + /* Pointer to Board Data */ + A_UINT32 hi_board_data; /* 0x54 */ + A_UINT32 hi_board_data_initialized; /* 0x58 */ + + A_UINT32 hi_dset_RAM_index_table; /* 0x5c */ + + A_UINT32 hi_desired_baud_rate; /* 0x60 */ + A_UINT32 hi_dbglog_config; /* 0x64 */ + A_UINT32 hi_end_RAM_reserve_sz; /* 0x68 */ + A_UINT32 hi_mbox_io_block_sz; /* 0x6c */ + + A_UINT32 hi_num_bpatch_streams; /* 0x70 */ + A_UINT32 hi_mbox_isr_yield_limit; /* 0x74 */ + + A_UINT32 hi_refclk_hz; /* 0x78 */ +}; + +/* Bits defined in hi_option_flag */ +#define HI_OPTION_TIMER_WAR 1 /* not really used */ + +/* + * Intended for use by Host software, this macro returns the Target RAM + * address of any item in the host_interest structure. + * Example: target_addr = AR6001_HOST_INTEREST_ITEM_ADDRESS(hi_board_data); + */ +#define AR6001_HOST_INTEREST_ITEM_ADDRESS(item) \ + ((A_UINT32)&((((struct host_interest_s *)(AR6001_HOST_INTEREST_ADDRESS))->item))) + +#define AR6002_HOST_INTEREST_ITEM_ADDRESS(item) \ + ((A_UINT32)&((((struct host_interest_s *)(AR6002_HOST_INTEREST_ADDRESS))->item))) + + +#endif /* !__ASSEMBLER__ */ + +#endif /* __TARGADDRS_H__ */ diff --git a/drivers/ar6000/include/testcmd.h b/drivers/ar6000/include/testcmd.h new file mode 100644 index 00000000000..737533adb4d --- /dev/null +++ b/drivers/ar6000/include/testcmd.h @@ -0,0 +1,144 @@ +/* + * Copyright (c) 2004-2005 Atheros Communications Inc. + * All rights reserved. + * + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + */ + +#ifndef TESTCMD_H_ +#define TESTCMD_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + ZEROES_PATTERN = 0, + ONES_PATTERN, + REPEATING_10, + PN7_PATTERN, + PN9_PATTERN, + PN15_PATTERN +}TX_DATA_PATTERN; + +/* Continous tx + mode : TCMD_CONT_TX_OFF - Disabling continous tx + TCMD_CONT_TX_SINE - Enable continuous unmodulated tx + TCMD_CONT_TX_FRAME- Enable continuous modulated tx + freq : Channel freq in Mhz. (e.g 2412 for channel 1 in 11 g) +dataRate: 0 - 1 Mbps + 1 - 2 Mbps + 2 - 5.5 Mbps + 3 - 11 Mbps + 4 - 6 Mbps + 5 - 9 Mbps + 6 - 12 Mbps + 7 - 18 Mbps + 8 - 24 Mbps + 9 - 36 Mbps + 10 - 28 Mbps + 11 - 54 Mbps + txPwr: Tx power in dBm[5 -11] for unmod Tx, [5-14] for mod Tx +antenna: 1 - one antenna + 2 - two antenna +Note : Enable/disable continuous tx test cmd works only when target is awake. +*/ + +typedef enum { + TCMD_CONT_TX_OFF = 0, + TCMD_CONT_TX_SINE, + TCMD_CONT_TX_FRAME, + TCMD_CONT_TX_TX99, + TCMD_CONT_TX_TX100 +} TCMD_CONT_TX_MODE; + +typedef PREPACK struct { + A_UINT32 testCmdId; + A_UINT32 mode; + A_UINT32 freq; + A_UINT32 dataRate; + A_INT32 txPwr; + A_UINT32 antenna; + A_UINT32 enANI; + A_UINT32 scramblerOff; + A_UINT32 aifsn; + A_UINT16 pktSz; + A_UINT16 txPattern; +} POSTPACK TCMD_CONT_TX; + +#define TCMD_TXPATTERN_ZERONE 0x1 +#define TCMD_TXPATTERN_ZERONE_DIS_SCRAMBLE 0x2 + +/* Continuous Rx + act: TCMD_CONT_RX_PROMIS - promiscuous mode (accept all incoming frames) + TCMD_CONT_RX_FILTER - filter mode (accept only frames with dest + address equal specified + mac address (set via act =3) + TCMD_CONT_RX_REPORT off mode (disable cont rx mode and get the + report from the last cont + Rx test) + + TCMD_CONT_RX_SETMAC - set MacAddr mode (sets the MAC address for the + target. This Overrides + the default MAC address.) + +*/ +typedef enum { + TCMD_CONT_RX_PROMIS =0, + TCMD_CONT_RX_FILTER, + TCMD_CONT_RX_REPORT, + TCMD_CONT_RX_SETMAC +} TCMD_CONT_RX_ACT; + +typedef PREPACK struct { + A_UINT32 testCmdId; + A_UINT32 act; + A_UINT32 enANI; + PREPACK union { + struct PREPACK TCMD_CONT_RX_PARA { + A_UINT32 freq; + A_UINT32 antenna; + } POSTPACK para; + struct PREPACK TCMD_CONT_RX_REPORT { + A_UINT32 totalPkt; + A_INT32 rssiInDBm; + } POSTPACK report; + struct PREPACK TCMD_CONT_RX_MAC { + A_UCHAR addr[ATH_MAC_LEN]; + } POSTPACK mac; + } POSTPACK u; +} POSTPACK TCMD_CONT_RX; + +/* Force sleep/wake test cmd + mode: TCMD_PM_WAKEUP - Wakeup the target + TCMD_PM_SLEEP - Force the target to sleep. + */ +typedef enum { + TCMD_PM_WAKEUP = 1, /* be consistent with target */ + TCMD_PM_SLEEP +} TCMD_PM_MODE; + +typedef PREPACK struct { + A_UINT32 testCmdId; + A_UINT32 mode; +} POSTPACK TCMD_PM; + +typedef enum{ + TCMD_CONT_TX_ID, + TCMD_CONT_RX_ID, + TCMD_PM_ID + } TCMD_ID; + +typedef PREPACK union { + TCMD_CONT_TX contTx; + TCMD_CONT_RX contRx; + TCMD_PM pm ; +} POSTPACK TEST_CMD; + +#ifdef __cplusplus +} +#endif + +#endif /* TESTCMD_H_ */ diff --git a/drivers/ar6000/include/wlan_api.h b/drivers/ar6000/include/wlan_api.h new file mode 100644 index 00000000000..aabca4b7b6e --- /dev/null +++ b/drivers/ar6000/include/wlan_api.h @@ -0,0 +1,101 @@ +#ifndef _HOST_WLAN_API_H_ +#define _HOST_WLAN_API_H_ +/* + * Copyright (c) 2004-2005 Atheros Communications Inc. + * All rights reserved. + * + * This file contains the API for the host wlan module + * + * $Id: //depot/sw/releases/olca2.0-GPL/host/include/wlan_api.h#1 $ + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifdef __cplusplus +extern "C" { +#endif + +struct ieee80211_node_table; +struct ieee80211_frame; + +struct ieee80211_common_ie { + A_UINT16 ie_chan; + A_UINT8 *ie_tstamp; + A_UINT8 *ie_ssid; + A_UINT8 *ie_rates; + A_UINT8 *ie_xrates; + A_UINT8 *ie_country; + A_UINT8 *ie_wpa; + A_UINT8 *ie_rsn; + A_UINT8 *ie_wmm; + A_UINT8 *ie_ath; + A_UINT16 ie_capInfo; + A_UINT16 ie_beaconInt; + A_UINT8 *ie_tim; + A_UINT8 *ie_chswitch; + A_UINT8 ie_erp; + A_UINT8 *ie_wsc; +}; + +typedef struct bss { + A_UINT8 ni_macaddr[6]; + A_UINT8 ni_snr; + A_INT16 ni_rssi; + struct bss *ni_list_next; + struct bss *ni_list_prev; + struct bss *ni_hash_next; + struct bss *ni_hash_prev; + struct ieee80211_common_ie ni_cie; + A_UINT8 *ni_buf; + struct ieee80211_node_table *ni_table; + A_UINT32 ni_refcnt; + int ni_scangen; + A_UINT32 ni_tstamp; +} bss_t; + +typedef void wlan_node_iter_func(void *arg, bss_t *); + +bss_t *wlan_node_alloc(struct ieee80211_node_table *nt, int wh_size); +void wlan_node_free(bss_t *ni); +void wlan_setup_node(struct ieee80211_node_table *nt, bss_t *ni, + const A_UINT8 *macaddr); +bss_t *wlan_find_node(struct ieee80211_node_table *nt, const A_UINT8 *macaddr); +void wlan_node_reclaim(struct ieee80211_node_table *nt, bss_t *ni); +void wlan_free_allnodes(struct ieee80211_node_table *nt); +void wlan_iterate_nodes(struct ieee80211_node_table *nt, wlan_node_iter_func *f, + void *arg); + +void wlan_node_table_init(void *wmip, struct ieee80211_node_table *nt); +void wlan_node_table_reset(struct ieee80211_node_table *nt); +void wlan_node_table_cleanup(struct ieee80211_node_table *nt); + +A_STATUS wlan_parse_beacon(A_UINT8 *buf, int framelen, + struct ieee80211_common_ie *cie); + +A_UINT16 wlan_ieee2freq(int chan); +A_UINT32 wlan_freq2ieee(A_UINT16 freq); + + +bss_t * +wlan_find_Ssidnode (struct ieee80211_node_table *nt, A_UCHAR *pSsid, + A_UINT32 ssidLength, A_BOOL bIsWPA2); + +void +wlan_node_return (struct ieee80211_node_table *nt, bss_t *ni); + +#ifdef __cplusplus +} +#endif + +#endif /* _HOST_WLAN_API_H_ */ diff --git a/drivers/ar6000/include/wlan_dset.h b/drivers/ar6000/include/wlan_dset.h new file mode 100644 index 00000000000..8a876d6476c --- /dev/null +++ b/drivers/ar6000/include/wlan_dset.h @@ -0,0 +1,20 @@ +/* + * Copyright (c) 2007 Atheros Communications, Inc. + * All rights reserved. + * + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + */ + +#ifndef __WLAN_DSET_H__ +#define __WKAN_DSET_H__ + +typedef PREPACK struct wow_config_dset { + + A_UINT8 valid_dset; + A_UINT8 gpio_enable; + A_UINT16 gpio_pin; +} POSTPACK WOW_CONFIG_DSET; + +#endif diff --git a/drivers/ar6000/include/wmi.h b/drivers/ar6000/include/wmi.h new file mode 100644 index 00000000000..045acd4d398 --- /dev/null +++ b/drivers/ar6000/include/wmi.h @@ -0,0 +1,1743 @@ +/* + * Copyright (c) 2004-2006 Atheros Communications Inc. + * All rights reserved. + * + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + * This file contains the definitions of the WMI protocol specified in the + * Wireless Module Interface (WMI). It includes definitions of all the + * commands and events. Commands are messages from the host to the WM. + * Events and Replies are messages from the WM to the host. + * + * Ownership of correctness in regards to WMI commands + * belongs to the host driver and the WM is not required to validate + * parameters for value, proper range, or any other checking. + * + */ + +#ifndef _WMI_H_ +#define _WMI_H_ + +#ifndef ATH_TARGET +#include "athstartpack.h" +#endif + +#include "wmix.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define WMI_PROTOCOL_VERSION 0x0002 +#define WMI_PROTOCOL_REVISION 0x0000 + +#define ATH_MAC_LEN 6 /* length of mac in bytes */ +#define WMI_CMD_MAX_LEN 100 +#define WMI_CONTROL_MSG_MAX_LEN 256 +#define WMI_OPT_CONTROL_MSG_MAX_LEN 1536 +#define IS_ETHERTYPE(_typeOrLen) ((_typeOrLen) >= 0x0600) +#define RFC1042OUI {0x00, 0x00, 0x00} + +#define IP_ETHERTYPE 0x0800 + +#define WMI_IMPLICIT_PSTREAM 0xFF +#define WMI_MAX_THINSTREAM 15 + +struct host_app_area_s { + A_UINT32 wmi_protocol_ver; +}; + +/* + * Data Path + */ +typedef PREPACK struct { + A_UINT8 dstMac[ATH_MAC_LEN]; + A_UINT8 srcMac[ATH_MAC_LEN]; + A_UINT16 typeOrLen; +} POSTPACK ATH_MAC_HDR; + +typedef PREPACK struct { + A_UINT8 dsap; + A_UINT8 ssap; + A_UINT8 cntl; + A_UINT8 orgCode[3]; + A_UINT16 etherType; +} POSTPACK ATH_LLC_SNAP_HDR; + +typedef enum { + DATA_MSGTYPE = 0x0, + CNTL_MSGTYPE, + SYNC_MSGTYPE +} WMI_MSG_TYPE; + + +typedef PREPACK struct { + A_INT8 rssi; + A_UINT8 info; /* WMI_MSG_TYPE in lower 2 bits - b1b0 */ + /* UP in next 3 bits - b4b3b2 */ +#define WMI_DATA_HDR_MSG_TYPE_MASK 0x03 +#define WMI_DATA_HDR_MSG_TYPE_SHIFT 0 +#define WMI_DATA_HDR_UP_MASK 0x07 +#define WMI_DATA_HDR_UP_SHIFT 2 +#define WMI_DATA_HDR_IS_MSG_TYPE(h, t) (((h)->info & (WMI_DATA_HDR_MSG_TYPE_MASK)) == (t)) +} POSTPACK WMI_DATA_HDR; + + +#define WMI_DATA_HDR_SET_MSG_TYPE(h, t) (h)->info = (((h)->info & ~(WMI_DATA_HDR_MSG_TYPE_MASK << WMI_DATA_HDR_MSG_TYPE_SHIFT)) | (t << WMI_DATA_HDR_MSG_TYPE_SHIFT)) +#define WMI_DATA_HDR_SET_UP(h, p) (h)->info = (((h)->info & ~(WMI_DATA_HDR_UP_MASK << WMI_DATA_HDR_UP_SHIFT)) | (p << WMI_DATA_HDR_UP_SHIFT)) + +/* + * Control Path + */ +typedef PREPACK struct { + A_UINT16 commandId; +} POSTPACK WMI_CMD_HDR; /* used for commands and events */ + +/* + * List of Commnands + */ +typedef enum { + WMI_CONNECT_CMDID = 0x0001, + WMI_RECONNECT_CMDID, + WMI_DISCONNECT_CMDID, + WMI_SYNCHRONIZE_CMDID, + WMI_CREATE_PSTREAM_CMDID, + WMI_DELETE_PSTREAM_CMDID, + WMI_START_SCAN_CMDID, + WMI_SET_SCAN_PARAMS_CMDID, + WMI_SET_BSS_FILTER_CMDID, + WMI_SET_PROBED_SSID_CMDID, + WMI_SET_LISTEN_INT_CMDID, + WMI_SET_BMISS_TIME_CMDID, + WMI_SET_DISC_TIMEOUT_CMDID, + WMI_GET_CHANNEL_LIST_CMDID, + WMI_SET_BEACON_INT_CMDID, + WMI_GET_STATISTICS_CMDID, + WMI_SET_CHANNEL_PARAMS_CMDID, + WMI_SET_POWER_MODE_CMDID, + WMI_SET_IBSS_PM_CAPS_CMDID, + WMI_SET_POWER_PARAMS_CMDID, + WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID, + WMI_ADD_CIPHER_KEY_CMDID, + WMI_DELETE_CIPHER_KEY_CMDID, + WMI_ADD_KRK_CMDID, + WMI_DELETE_KRK_CMDID, + WMI_SET_PMKID_CMDID, + WMI_SET_TX_PWR_CMDID, + WMI_GET_TX_PWR_CMDID, + WMI_SET_ASSOC_INFO_CMDID, + WMI_ADD_BAD_AP_CMDID, + WMI_DELETE_BAD_AP_CMDID, + WMI_SET_TKIP_COUNTERMEASURES_CMDID, + WMI_RSSI_THRESHOLD_PARAMS_CMDID, + WMI_TARGET_ERROR_REPORT_BITMASK_CMDID, + WMI_SET_ACCESS_PARAMS_CMDID, + WMI_SET_RETRY_LIMITS_CMDID, + WMI_SET_OPT_MODE_CMDID, + WMI_OPT_TX_FRAME_CMDID, + WMI_SET_VOICE_PKT_SIZE_CMDID, + WMI_SET_MAX_SP_LEN_CMDID, + WMI_SET_ROAM_CTRL_CMDID, + WMI_GET_ROAM_TBL_CMDID, + WMI_GET_ROAM_DATA_CMDID, + WMI_ENABLE_RM_CMDID, + WMI_SET_MAX_OFFHOME_DURATION_CMDID, + WMI_EXTENSION_CMDID, /* Non-wireless extensions */ + WMI_SNR_THRESHOLD_PARAMS_CMDID, + WMI_LQ_THRESHOLD_PARAMS_CMDID, + WMI_SET_LPREAMBLE_CMDID, + WMI_SET_RTS_CMDID, + WMI_CLR_RSSI_SNR_CMDID, + WMI_SET_FIXRATES_CMDID, + WMI_GET_FIXRATES_CMDID, + WMI_SET_AUTH_MODE_CMDID, + WMI_SET_REASSOC_MODE_CMDID, + WMI_SET_WMM_CMDID, + WMI_SET_WMM_TXOP_CMDID, + WMI_TEST_CMDID, + WMI_SET_BT_STATUS_CMDID, + WMI_SET_BT_PARAMS_CMDID, + + WMI_SET_KEEPALIVE_CMDID, + WMI_GET_KEEPALIVE_CMDID, + WMI_SET_APPIE_CMDID, + WMI_GET_APPIE_CMDID, + WMI_SET_WSC_STATUS_CMDID, + + /* Wake on Wireless */ + WMI_SET_HOST_SLEEP_MODE_CMDID, + WMI_SET_WOW_MODE_CMDID, + WMI_GET_WOW_LIST_CMDID, + WMI_ADD_WOW_PATTERN_CMDID, + WMI_DEL_WOW_PATTERN_CMDID, + WMI_SET_MAC_ADDRESS_CMDID, + WMI_SET_AKMP_PARAMS_CMDID, + WMI_SET_PMKID_LIST_CMDID, + WMI_GET_PMKID_LIST_CMDID, + + /* + * Developer commands starts at 0xF000 + */ + WMI_SET_BITRATE_CMDID = 0xF000, + WMI_GET_BITRATE_CMDID, + WMI_SET_WHALPARAM_CMDID, + +} WMI_COMMAND_ID; + +/* + * Frame Types + */ +typedef enum { + WMI_FRAME_BEACON = 0, + WMI_FRAME_PROBE_REQ, + WMI_FRAME_PROBE_RESP, + WMI_FRAME_ASSOC_REQ, + WMI_FRAME_ASSOC_RESP, + WMI_NUM_MGMT_FRAME +} WMI_MGMT_FRAME_TYPE; + +/* + * Connect Command + */ +typedef enum { + INFRA_NETWORK = 0x01, + ADHOC_NETWORK = 0x02, + ADHOC_CREATOR = 0x04, +} NETWORK_TYPE; + +typedef enum { + OPEN_AUTH = 0x01, + SHARED_AUTH = 0x02, + LEAP_AUTH = 0x04, /* different from IEEE_AUTH_MODE definitions */ +} DOT11_AUTH_MODE; + +typedef enum { + NONE_AUTH = 0x01, + WPA_AUTH = 0x02, + WPA_PSK_AUTH = 0x03, + WPA2_AUTH = 0x04, + WPA2_PSK_AUTH = 0x05, + WPA_AUTH_CCKM = 0x06, + WPA2_AUTH_CCKM = 0x07, +} AUTH_MODE; + +typedef enum { + NONE_CRYPT = 0x01, + WEP_CRYPT = 0x02, + TKIP_CRYPT = 0x03, + AES_CRYPT = 0x04, +} CRYPTO_TYPE; + +#define WMI_MIN_CRYPTO_TYPE NONE_CRYPT +#define WMI_MAX_CRYPTO_TYPE (AES_CRYPT + 1) + +#define WMI_MIN_KEY_INDEX 0 +#define WMI_MAX_KEY_INDEX 3 + +#define WMI_MAX_KEY_LEN 32 + +#define WMI_MAX_SSID_LEN 32 + +typedef enum { + CONNECT_ASSOC_POLICY_USER = 0x0001, + CONNECT_SEND_REASSOC = 0x0002, + CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004, + CONNECT_PROFILE_MATCH_DONE = 0x0008, + CONNECT_IGNORE_AAC_BEACON = 0x0010, + CONNECT_CSA_FOLLOW_BSS = 0x0020, +} WMI_CONNECT_CTRL_FLAGS_BITS; + +#define DEFAULT_CONNECT_CTRL_FLAGS (CONNECT_CSA_FOLLOW_BSS) + +typedef PREPACK struct { + A_UINT8 networkType; + A_UINT8 dot11AuthMode; + A_UINT8 authMode; + A_UINT8 pairwiseCryptoType; + A_UINT8 pairwiseCryptoLen; + A_UINT8 groupCryptoType; + A_UINT8 groupCryptoLen; + A_UINT8 ssidLength; + A_UCHAR ssid[WMI_MAX_SSID_LEN]; + A_UINT16 channel; + A_UINT8 bssid[ATH_MAC_LEN]; + A_UINT32 ctrl_flags; +} POSTPACK WMI_CONNECT_CMD; + +/* + * WMI_RECONNECT_CMDID + */ +typedef PREPACK struct { + A_UINT16 channel; /* hint */ + A_UINT8 bssid[ATH_MAC_LEN]; /* mandatory if set */ +} POSTPACK WMI_RECONNECT_CMD; + +/* + * WMI_ADD_CIPHER_KEY_CMDID + */ +typedef enum { + PAIRWISE_USAGE = 0x00, + GROUP_USAGE = 0x01, + TX_USAGE = 0x02, /* default Tx Key - Static WEP only */ +} KEY_USAGE; + +/* + * Bit Flag + * Bit 0 - Initialise TSC - default is Initialize + */ +#define KEY_OP_INIT_TSC 0x01 +#define KEY_OP_INIT_RSC 0x02 + +#define KEY_OP_INIT_VAL 0x03 /* Default Initialise the TSC & RSC */ +#define KEY_OP_VALID_MASK 0x03 + +typedef PREPACK struct { + A_UINT8 keyIndex; + A_UINT8 keyType; + A_UINT8 keyUsage; /* KEY_USAGE */ + A_UINT8 keyLength; + A_UINT8 keyRSC[8]; /* key replay sequence counter */ + A_UINT8 key[WMI_MAX_KEY_LEN]; + A_UINT8 key_op_ctrl; /* Additional Key Control information */ +} POSTPACK WMI_ADD_CIPHER_KEY_CMD; + +/* + * WMI_DELETE_CIPHER_KEY_CMDID + */ +typedef PREPACK struct { + A_UINT8 keyIndex; +} POSTPACK WMI_DELETE_CIPHER_KEY_CMD; + +#define WMI_KRK_LEN 16 +/* + * WMI_ADD_KRK_CMDID + */ +typedef PREPACK struct { + A_UINT8 krk[WMI_KRK_LEN]; +} POSTPACK WMI_ADD_KRK_CMD; + +/* + * WMI_SET_TKIP_COUNTERMEASURES_CMDID + */ +typedef enum { + WMI_TKIP_CM_DISABLE = 0x0, + WMI_TKIP_CM_ENABLE = 0x1, +} WMI_TKIP_CM_CONTROL; + +typedef PREPACK struct { + A_UINT8 cm_en; /* WMI_TKIP_CM_CONTROL */ +} POSTPACK WMI_SET_TKIP_COUNTERMEASURES_CMD; + +/* + * WMI_SET_PMKID_CMDID + */ + +#define WMI_PMKID_LEN 16 + +typedef enum { + PMKID_DISABLE = 0, + PMKID_ENABLE = 1, +} PMKID_ENABLE_FLG; + +typedef PREPACK struct { + A_UINT8 bssid[ATH_MAC_LEN]; + A_UINT8 enable; /* PMKID_ENABLE_FLG */ + A_UINT8 pmkid[WMI_PMKID_LEN]; +} POSTPACK WMI_SET_PMKID_CMD; + +/* + * WMI_START_SCAN_CMD + */ +typedef enum { + WMI_LONG_SCAN = 0, + WMI_SHORT_SCAN = 1, +} WMI_SCAN_TYPE; + +typedef PREPACK struct { + A_BOOL forceFgScan; + A_BOOL isLegacy; /* For Legacy Cisco AP compatibility */ + A_UINT32 homeDwellTime; /* Maximum duration in the home channel(milliseconds) */ + A_UINT32 forceScanInterval; /* Time interval between scans (milliseconds)*/ + A_UINT8 scanType; /* WMI_SCAN_TYPE */ +} POSTPACK WMI_START_SCAN_CMD; + +/* + * WMI_SET_SCAN_PARAMS_CMDID + */ +#define WMI_SHORTSCANRATIO_DEFAULT 3 +typedef enum { + CONNECT_SCAN_CTRL_FLAGS = 0x01, /* set if can scan in the Connect cmd */ + SCAN_CONNECTED_CTRL_FLAGS = 0x02, /* set if scan for the SSID it is */ + /* already connected to */ + ACTIVE_SCAN_CTRL_FLAGS = 0x04, /* set if enable active scan */ + ROAM_SCAN_CTRL_FLAGS = 0x08, /* set if enable roam scan when bmiss and lowrssi */ + REPORT_BSSINFO_CTRL_FLAGS = 0x10, /* set if follows customer BSSINFO reporting rule */ + ENABLE_AUTO_CTRL_FLAGS = 0x20, /* if disabled, target doesn't + scan after a disconnect event */ + ENABLE_SCAN_ABORT_EVENT = 0x40 /* Scan complete event with canceled status will be generated when a scan is prempted before it gets completed */ + +} WMI_SCAN_CTRL_FLAGS_BITS; + +#define CAN_SCAN_IN_CONNECT(flags) (flags & CONNECT_SCAN_CTRL_FLAGS) +#define CAN_SCAN_CONNECTED(flags) (flags & SCAN_CONNECTED_CTRL_FLAGS) +#define ENABLE_ACTIVE_SCAN(flags) (flags & ACTIVE_SCAN_CTRL_FLAGS) +#define ENABLE_ROAM_SCAN(flags) (flags & ROAM_SCAN_CTRL_FLAGS) +#define CONFIG_REPORT_BSSINFO(flags) (flags & REPORT_BSSINFO_CTRL_FLAGS) +#define IS_AUTO_SCAN_ENABLED(flags) (flags & ENABLE_AUTO_CTRL_FLAGS) +#define SCAN_ABORT_EVENT_ENABLED(flags) (flags & ENABLE_SCAN_ABORT_EVENT) + +#define DEFAULT_SCAN_CTRL_FLAGS (CONNECT_SCAN_CTRL_FLAGS| SCAN_CONNECTED_CTRL_FLAGS| ACTIVE_SCAN_CTRL_FLAGS| ROAM_SCAN_CTRL_FLAGS | ENABLE_AUTO_CTRL_FLAGS) + + +typedef PREPACK struct { + A_UINT16 fg_start_period; /* seconds */ + A_UINT16 fg_end_period; /* seconds */ + A_UINT16 bg_period; /* seconds */ + A_UINT16 maxact_chdwell_time; /* msec */ + A_UINT16 pas_chdwell_time; /* msec */ + A_UINT8 shortScanRatio; /* how many shorts scan for one long */ + A_UINT8 scanCtrlFlags; + A_UINT16 minact_chdwell_time; /* msec */ + A_UINT32 max_dfsch_act_time; /* msecs */ +} POSTPACK WMI_SCAN_PARAMS_CMD; + +/* + * WMI_SET_BSS_FILTER_CMDID + */ +typedef enum { + NONE_BSS_FILTER = 0x0, /* no beacons forwarded */ + ALL_BSS_FILTER, /* all beacons forwarded */ + PROFILE_FILTER, /* only beacons matching profile */ + ALL_BUT_PROFILE_FILTER, /* all but beacons matching profile */ + CURRENT_BSS_FILTER, /* only beacons matching current BSS */ + ALL_BUT_BSS_FILTER, /* all but beacons matching BSS */ + PROBED_SSID_FILTER, /* beacons matching probed ssid */ + LAST_BSS_FILTER, /* marker only */ +} WMI_BSS_FILTER; + +typedef PREPACK struct { + A_UINT8 bssFilter; /* see WMI_BSS_FILTER */ + A_UINT32 ieMask; +} POSTPACK WMI_BSS_FILTER_CMD; + +/* + * WMI_SET_PROBED_SSID_CMDID + */ +#define MAX_PROBED_SSID_INDEX 5 + +typedef enum { + DISABLE_SSID_FLAG = 0, /* disables entry */ + SPECIFIC_SSID_FLAG = 0x01, /* probes specified ssid */ + ANY_SSID_FLAG = 0x02, /* probes for any ssid */ +} WMI_SSID_FLAG; + +typedef PREPACK struct { + A_UINT8 entryIndex; /* 0 to MAX_PROBED_SSID_INDEX */ + A_UINT8 flag; /* WMI_SSID_FLG */ + A_UINT8 ssidLength; + A_UINT8 ssid[32]; +} POSTPACK WMI_PROBED_SSID_CMD; + +/* + * WMI_SET_LISTEN_INT_CMDID + * The Listen interval is between 15 and 3000 TUs + */ +#define MIN_LISTEN_INTERVAL 15 +#define MAX_LISTEN_INTERVAL 5000 +#define MIN_LISTEN_BEACONS 1 +#define MAX_LISTEN_BEACONS 50 + +typedef PREPACK struct { + A_UINT16 listenInterval; + A_UINT16 numBeacons; +} POSTPACK WMI_LISTEN_INT_CMD; + +/* + * WMI_SET_BEACON_INT_CMDID + */ +typedef PREPACK struct { + A_UINT16 beaconInterval; +} POSTPACK WMI_BEACON_INT_CMD; + +/* + * WMI_SET_BMISS_TIME_CMDID + * valid values are between 1000 and 5000 TUs + */ + +#define MIN_BMISS_TIME 1000 +#define MAX_BMISS_TIME 5000 +#define MIN_BMISS_BEACONS 1 +#define MAX_BMISS_BEACONS 50 + +typedef PREPACK struct { + A_UINT16 bmissTime; + A_UINT16 numBeacons; +} POSTPACK WMI_BMISS_TIME_CMD; + +/* + * WMI_SET_POWER_MODE_CMDID + */ +typedef enum { + REC_POWER = 0x01, + MAX_PERF_POWER, +} WMI_POWER_MODE; + +typedef PREPACK struct { + A_UINT8 powerMode; /* WMI_POWER_MODE */ +} POSTPACK WMI_POWER_MODE_CMD; + +/* + * WMI_SET_POWER_PARAMS_CMDID + */ +typedef enum { + IGNORE_DTIM = 0x01, + NORMAL_DTIM = 0x02, + STICK_DTIM = 0x03, +} WMI_DTIM_POLICY; + +typedef PREPACK struct { + A_UINT16 idle_period; /* msec */ + A_UINT16 pspoll_number; + A_UINT16 dtim_policy; +} POSTPACK WMI_POWER_PARAMS_CMD; + +typedef PREPACK struct { + A_UINT8 power_saving; + A_UINT8 ttl; /* number of beacon periods */ + A_UINT16 atim_windows; /* msec */ + A_UINT16 timeout_value; /* msec */ +} POSTPACK WMI_IBSS_PM_CAPS_CMD; + +/* + * WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID + */ +typedef enum { + IGNORE_TIM_ALL_QUEUES_APSD = 0, + PROCESS_TIM_ALL_QUEUES_APSD = 1, + IGNORE_TIM_SIMULATED_APSD = 2, + PROCESS_TIM_SIMULATED_APSD = 3, +} APSD_TIM_POLICY; + +typedef PREPACK struct { + A_UINT16 psPollTimeout; /* msec */ + A_UINT16 triggerTimeout; /* msec */ + A_UINT32 apsdTimPolicy; /* TIM behavior with ques APSD enabled. Default is IGNORE_TIM_ALL_QUEUES_APSD */ + A_UINT32 simulatedAPSDTimPolicy; /* TIM behavior with simulated APSD enabled. Default is PROCESS_TIM_SIMULATED_APSD */ +} POSTPACK WMI_POWERSAVE_TIMERS_POLICY_CMD; + +/* + * WMI_SET_VOICE_PKT_SIZE_CMDID + */ +typedef PREPACK struct { + A_UINT16 voicePktSize; +} POSTPACK WMI_SET_VOICE_PKT_SIZE_CMD; + +/* + * WMI_SET_MAX_SP_LEN_CMDID + */ +typedef enum { + DELIVER_ALL_PKT = 0x0, + DELIVER_2_PKT = 0x1, + DELIVER_4_PKT = 0x2, + DELIVER_6_PKT = 0x3, +} APSD_SP_LEN_TYPE; + +typedef PREPACK struct { + A_UINT8 maxSPLen; +} POSTPACK WMI_SET_MAX_SP_LEN_CMD; + +/* + * WMI_SET_DISC_TIMEOUT_CMDID + */ +typedef PREPACK struct { + A_UINT8 disconnectTimeout; /* seconds */ +} POSTPACK WMI_DISC_TIMEOUT_CMD; + +typedef enum { + UPLINK_TRAFFIC = 0, + DNLINK_TRAFFIC = 1, + BIDIR_TRAFFIC = 2, +} DIR_TYPE; + +typedef enum { + DISABLE_FOR_THIS_AC = 0, + ENABLE_FOR_THIS_AC = 1, + ENABLE_FOR_ALL_AC = 2, +} VOICEPS_CAP_TYPE; + +typedef enum { + TRAFFIC_TYPE_APERIODIC = 0, + TRAFFIC_TYPE_PERIODIC = 1, +}TRAFFIC_TYPE; + +/* + * WMI_CREATE_PSTREAM_CMDID + */ +typedef PREPACK struct { + A_UINT32 minServiceInt; /* in milli-sec */ + A_UINT32 maxServiceInt; /* in milli-sec */ + A_UINT32 inactivityInt; /* in milli-sec */ + A_UINT32 suspensionInt; /* in milli-sec */ + A_UINT32 serviceStartTime; + A_UINT32 minDataRate; /* in bps */ + A_UINT32 meanDataRate; /* in bps */ + A_UINT32 peakDataRate; /* in bps */ + A_UINT32 maxBurstSize; + A_UINT32 delayBound; + A_UINT32 minPhyRate; /* in bps */ + A_UINT32 sba; + A_UINT32 mediumTime; + A_UINT16 nominalMSDU; /* in octects */ + A_UINT16 maxMSDU; /* in octects */ + A_UINT8 trafficClass; + A_UINT8 trafficType; /* TRAFFIC_TYPE */ + A_UINT8 trafficDirection; /* TRAFFIC_DIR */ + A_UINT8 voicePSCapability; /* VOICEPS_CAP_TYPE */ + A_UINT8 tsid; + A_UINT8 userPriority; /* 802.1D user priority */ +} POSTPACK WMI_CREATE_PSTREAM_CMD; + +/* + * WMI_DELETE_PSTREAM_CMDID + */ +typedef PREPACK struct { + A_UINT8 trafficClass; + A_UINT8 tsid; +} POSTPACK WMI_DELETE_PSTREAM_CMD; + +/* + * WMI_SET_CHANNEL_PARAMS_CMDID + */ +typedef enum { + WMI_11A_MODE = 0x1, + WMI_11G_MODE = 0x2, + WMI_11AG_MODE = 0x3, + WMI_11B_MODE = 0x4, + WMI_11GONLY_MODE = 0x5, +} WMI_PHY_MODE; + +#define WMI_MAX_CHANNELS 32 + +typedef PREPACK struct { + A_UINT8 reserved1; + A_UINT8 scanParam; /* set if enable scan */ + A_UINT8 phyMode; /* see WMI_PHY_MODE */ + A_UINT8 numChannels; /* how many channels follow */ + A_UINT16 channelList[1]; /* channels in Mhz */ +} POSTPACK WMI_CHANNEL_PARAMS_CMD; + + +/* + * WMI_RSSI_THRESHOLD_PARAMS_CMDID + * Setting the polltime to 0 would disable polling. + * Threshold values are in the ascending order, and should agree to: + * (lowThreshold_lowerVal < lowThreshold_upperVal < highThreshold_lowerVal + * < highThreshold_upperVal) + */ + +typedef PREPACK struct WMI_RSSI_THRESHOLD_PARAMS{ + A_UINT32 pollTime; /* Polling time as a factor of LI */ + A_INT16 thresholdAbove1_Val; /* lowest of upper */ + A_INT16 thresholdAbove2_Val; + A_INT16 thresholdAbove3_Val; + A_INT16 thresholdAbove4_Val; + A_INT16 thresholdAbove5_Val; + A_INT16 thresholdAbove6_Val; /* highest of upper */ + A_INT16 thresholdBelow1_Val; /* lowest of bellow */ + A_INT16 thresholdBelow2_Val; + A_INT16 thresholdBelow3_Val; + A_INT16 thresholdBelow4_Val; + A_INT16 thresholdBelow5_Val; + A_INT16 thresholdBelow6_Val; /* highest of bellow */ + A_UINT8 weight; /* "alpha" */ + A_UINT8 reserved[3]; +} POSTPACK WMI_RSSI_THRESHOLD_PARAMS_CMD; + +/* + * WMI_SNR_THRESHOLD_PARAMS_CMDID + * Setting the polltime to 0 would disable polling. + */ + +typedef PREPACK struct WMI_SNR_THRESHOLD_PARAMS{ + A_UINT32 pollTime; /* Polling time as a factor of LI */ + A_UINT8 weight; /* "alpha" */ + A_UINT8 thresholdAbove1_Val; /* lowest of uppper*/ + A_UINT8 thresholdAbove2_Val; + A_UINT8 thresholdAbove3_Val; + A_UINT8 thresholdAbove4_Val; /* highest of upper */ + A_UINT8 thresholdBelow1_Val; /* lowest of bellow */ + A_UINT8 thresholdBelow2_Val; + A_UINT8 thresholdBelow3_Val; + A_UINT8 thresholdBelow4_Val; /* highest of bellow */ + A_UINT8 reserved[3]; +} POSTPACK WMI_SNR_THRESHOLD_PARAMS_CMD; + +/* + * WMI_LQ_THRESHOLD_PARAMS_CMDID + */ +typedef PREPACK struct WMI_LQ_THRESHOLD_PARAMS { + A_UINT8 enable; + A_UINT8 thresholdAbove1_Val; + A_UINT8 thresholdAbove2_Val; + A_UINT8 thresholdAbove3_Val; + A_UINT8 thresholdAbove4_Val; + A_UINT8 thresholdBelow1_Val; + A_UINT8 thresholdBelow2_Val; + A_UINT8 thresholdBelow3_Val; + A_UINT8 thresholdBelow4_Val; + A_UINT8 reserved[3]; +} POSTPACK WMI_LQ_THRESHOLD_PARAMS_CMD; + +typedef enum { + WMI_LPREAMBLE_DISABLED = 0, + WMI_LPREAMBLE_ENABLED +} WMI_LPREAMBLE_STATUS; + +typedef PREPACK struct { + A_UINT8 status; +}POSTPACK WMI_SET_LPREAMBLE_CMD; + +typedef PREPACK struct { + A_UINT16 threshold; +}POSTPACK WMI_SET_RTS_CMD; + +/* + * WMI_TARGET_ERROR_REPORT_BITMASK_CMDID + * Sets the error reporting event bitmask in target. Target clears it + * upon an error. Subsequent errors are counted, but not reported + * via event, unless the bitmask is set again. + */ +typedef PREPACK struct { + A_UINT32 bitmask; +} POSTPACK WMI_TARGET_ERROR_REPORT_BITMASK; + +/* + * WMI_SET_TX_PWR_CMDID + */ +typedef PREPACK struct { + A_UINT8 dbM; /* in dbM units */ +} POSTPACK WMI_SET_TX_PWR_CMD, WMI_TX_PWR_REPLY; + +/* + * WMI_SET_ASSOC_INFO_CMDID + * + * A maximum of 2 private IEs can be sent in the [Re]Assoc request. + * A 3rd one, the CCX version IE can also be set from the host. + */ +#define WMI_MAX_ASSOC_INFO_TYPE 2 +#define WMI_CCX_VER_IE 2 /* ieType to set CCX Version IE */ + +#define WMI_MAX_ASSOC_INFO_LEN 240 + +typedef PREPACK struct { + A_UINT8 ieType; + A_UINT8 bufferSize; + A_UINT8 assocInfo[1]; /* up to WMI_MAX_ASSOC_INFO_LEN */ +} POSTPACK WMI_SET_ASSOC_INFO_CMD; + + +/* + * WMI_GET_TX_PWR_CMDID does not take any parameters + */ + +/* + * WMI_ADD_BAD_AP_CMDID + */ +#define WMI_MAX_BAD_AP_INDEX 1 + +typedef PREPACK struct { + A_UINT8 badApIndex; /* 0 to WMI_MAX_BAD_AP_INDEX */ + A_UINT8 bssid[ATH_MAC_LEN]; +} POSTPACK WMI_ADD_BAD_AP_CMD; + +/* + * WMI_DELETE_BAD_AP_CMDID + */ +typedef PREPACK struct { + A_UINT8 badApIndex; /* 0 to WMI_MAX_BAD_AP_INDEX */ +} POSTPACK WMI_DELETE_BAD_AP_CMD; + +/* + * WMI_SET_ACCESS_PARAMS_CMDID + */ +#define WMI_DEFAULT_TXOP_ACPARAM 0 /* implies one MSDU */ +#define WMI_DEFAULT_ECWMIN_ACPARAM 4 /* corresponds to CWmin of 15 */ +#define WMI_DEFAULT_ECWMAX_ACPARAM 10 /* corresponds to CWmax of 1023 */ +#define WMI_MAX_CW_ACPARAM 15 /* maximum eCWmin or eCWmax */ +#define WMI_DEFAULT_AIFSN_ACPARAM 2 +#define WMI_MAX_AIFSN_ACPARAM 15 +typedef PREPACK struct { + A_UINT16 txop; /* in units of 32 usec */ + A_UINT8 eCWmin; + A_UINT8 eCWmax; + A_UINT8 aifsn; +} POSTPACK WMI_SET_ACCESS_PARAMS_CMD; + + +/* + * WMI_SET_RETRY_LIMITS_CMDID + * + * This command is used to customize the number of retries the + * wlan device will perform on a given frame. + */ +#define WMI_MIN_RETRIES 2 +#define WMI_MAX_RETRIES 13 +typedef enum { + MGMT_FRAMETYPE = 0, + CONTROL_FRAMETYPE = 1, + DATA_FRAMETYPE = 2 +} WMI_FRAMETYPE; + +typedef PREPACK struct { + A_UINT8 frameType; /* WMI_FRAMETYPE */ + A_UINT8 trafficClass; /* applies only to DATA_FRAMETYPE */ + A_UINT8 maxRetries; + A_UINT8 enableNotify; +} POSTPACK WMI_SET_RETRY_LIMITS_CMD; + +/* + * WMI_SET_ROAM_CTRL_CMDID + * + * This command is used to influence the Roaming behaviour + * Set the host biases of the BSSs before setting the roam mode as bias + * based. + */ + +/* + * Different types of Roam Control + */ + +typedef enum { + WMI_FORCE_ROAM = 1, /* Roam to the specified BSSID */ + WMI_SET_ROAM_MODE = 2, /* default ,progd bias, no roam */ + WMI_SET_HOST_BIAS = 3, /* Set the Host Bias */ + WMI_SET_LOWRSSI_SCAN_PARAMS = 4, /* Set lowrssi Scan parameters */ +} WMI_ROAM_CTRL_TYPE; + +#define WMI_MIN_ROAM_CTRL_TYPE WMI_FORCE_ROAM +#define WMI_MAX_ROAM_CTRL_TYPE WMI_SET_LOWRSSI_SCAN_PARAMS + +/* + * ROAM MODES + */ + +typedef enum { + WMI_DEFAULT_ROAM_MODE = 1, /* RSSI based ROAM */ + WMI_HOST_BIAS_ROAM_MODE = 2, /* HOST BIAS based ROAM */ + WMI_LOCK_BSS_MODE = 3 /* Lock to the Current BSS - no Roam */ +} WMI_ROAM_MODE; + +/* + * BSS HOST BIAS INFO + */ + +typedef PREPACK struct { + A_UINT8 bssid[ATH_MAC_LEN]; + A_INT8 bias; +} POSTPACK WMI_BSS_BIAS; + +typedef PREPACK struct { + A_UINT8 numBss; + WMI_BSS_BIAS bssBias[1]; +} POSTPACK WMI_BSS_BIAS_INFO; + +typedef PREPACK struct WMI_LOWRSSI_SCAN_PARAMS { + A_UINT16 lowrssi_scan_period; + A_INT16 lowrssi_scan_threshold; + A_INT16 lowrssi_roam_threshold; + A_UINT8 roam_rssi_floor; + A_UINT8 reserved[1]; /* For alignment */ +} POSTPACK WMI_LOWRSSI_SCAN_PARAMS; + +typedef PREPACK struct { + PREPACK union { + A_UINT8 bssid[ATH_MAC_LEN]; /* WMI_FORCE_ROAM */ + A_UINT8 roamMode; /* WMI_SET_ROAM_MODE */ + WMI_BSS_BIAS_INFO bssBiasInfo; /* WMI_SET_HOST_BIAS */ + WMI_LOWRSSI_SCAN_PARAMS lrScanParams; + } POSTPACK info; + A_UINT8 roamCtrlType ; +} POSTPACK WMI_SET_ROAM_CTRL_CMD; + +/* + * WMI_ENABLE_RM_CMDID + */ +typedef PREPACK struct { + A_BOOL enable_radio_measurements; +} POSTPACK WMI_ENABLE_RM_CMD; + +/* + * WMI_SET_MAX_OFFHOME_DURATION_CMDID + */ +typedef PREPACK struct { + A_UINT8 max_offhome_duration; +} POSTPACK WMI_SET_MAX_OFFHOME_DURATION_CMD; + +typedef PREPACK struct { + A_UINT32 frequency; + A_UINT8 threshold; +} POSTPACK WMI_SET_HB_CHALLENGE_RESP_PARAMS_CMD; + +typedef enum { + BT_STREAM_UNDEF = 0, + BT_STREAM_SCO, /* SCO stream */ + BT_STREAM_A2DP, /* A2DP stream */ + BT_STREAM_MAX +} BT_STREAM_TYPE; + +typedef enum { + BT_PARAM_SCO = 1, /* SCO stream parameters */ + BT_PARAM_A2DP, /* A2DP stream parameters */ + BT_PARAM_MISC, /* miscellaneous parameters */ + BT_PARAM_REGS, /* co-existence register parameters */ + BT_PARAM_MAX +} BT_PARAM_TYPE; + +typedef enum { + BT_STATUS_UNDEF = 0, + BT_STATUS_START, + BT_STATUS_STOP, + BT_STATUS_RESUME, + BT_STATUS_SUSPEND, + BT_STATUS_MAX +} BT_STREAM_STATUS; + +typedef PREPACK struct { + A_UINT8 streamType; + A_UINT8 status; +} POSTPACK WMI_SET_BT_STATUS_CMD; + +typedef PREPACK struct { + A_UINT8 noSCOPkts; + A_UINT8 pspollTimeout; + A_UINT8 stompbt; +} POSTPACK BT_PARAMS_SCO; + +typedef PREPACK struct { + A_UINT32 period; + A_UINT32 dutycycle; + A_UINT8 stompbt; +} POSTPACK BT_PARAMS_A2DP; + +typedef PREPACK struct { + A_UINT32 mode; + A_UINT32 scoWghts; + A_UINT32 a2dpWghts; + A_UINT32 genWghts; + A_UINT32 mode2; + A_UINT8 setVal; +} POSTPACK BT_COEX_REGS; + +typedef enum { + WLAN_PROTECT_POLICY = 1, + WLAN_COEX_CTRL_FLAGS +} BT_PARAMS_MISC_TYPE; + +typedef enum { + WLAN_PROTECT_PER_STREAM = 0x01, /* default */ + WLAN_PROTECT_ANY_TX = 0x02 +} WLAN_PROTECT_FLAGS; + + +#define WLAN_DISABLE_COEX_IN_DISCONNECT 0x01 /* default */ +#define WLAN_KEEP_COEX_IN_DISCONNECT 0x02 +#define WLAN_STOMPBT_IN_DISCONNECT 0x04 + +#define WLAN_DISABLE_COEX_IN_ROAM 0x10 /* default */ +#define WLAN_KEEP_COEX_IN_ROAM 0x20 +#define WLAN_STOMPBT_IN_ROAM 0x40 + +#define WLAN_DISABLE_COEX_IN_SCAN 0x100 /* default */ +#define WLAN_KEEP_COEX_IN_SCAN 0x200 +#define WLAN_STOMPBT_IN_SCAN 0x400 + +#define WLAN_DISABLE_COEX_BT_OFF 0x1000 /* default */ +#define WLAN_KEEP_COEX_BT_OFF 0x2000 +#define WLAN_STOMPBT_BT_OFF 0x4000 + +typedef PREPACK struct { + A_UINT32 period; + A_UINT32 dutycycle; + A_UINT8 stompbt; + A_UINT8 policy; +} POSTPACK WLAN_PROTECT_POLICY_TYPE; + +typedef PREPACK struct { + PREPACK union { + WLAN_PROTECT_POLICY_TYPE protectParams; + A_UINT16 wlanCtrlFlags; + } POSTPACK info; + A_UINT8 paramType; +} POSTPACK BT_PARAMS_MISC; + +typedef PREPACK struct { + PREPACK union { + BT_PARAMS_SCO scoParams; + BT_PARAMS_A2DP a2dpParams; + BT_PARAMS_MISC miscParams; + BT_COEX_REGS regs; + } POSTPACK info; + A_UINT8 paramType; +} POSTPACK WMI_SET_BT_PARAMS_CMD; + +/* + * Command Replies + */ + +/* + * WMI_GET_CHANNEL_LIST_CMDID reply + */ +typedef PREPACK struct { + A_UINT8 reserved1; + A_UINT8 numChannels; /* number of channels in reply */ + A_UINT16 channelList[1]; /* channel in Mhz */ +} POSTPACK WMI_CHANNEL_LIST_REPLY; + +typedef enum { + A_SUCCEEDED = A_OK, + A_FAILED_DELETE_STREAM_DOESNOT_EXIST=250, + A_SUCCEEDED_MODIFY_STREAM=251, + A_FAILED_INVALID_STREAM = 252, + A_FAILED_MAX_THINSTREAMS = 253, + A_FAILED_CREATE_REMOVE_PSTREAM_FIRST = 254, +} PSTREAM_REPLY_STATUS; + +/* + * List of Events (target to host) + */ +typedef enum { + WMI_READY_EVENTID = 0x1001, + WMI_CONNECT_EVENTID, + WMI_DISCONNECT_EVENTID, + WMI_BSSINFO_EVENTID, + WMI_CMDERROR_EVENTID, + WMI_REGDOMAIN_EVENTID, + WMI_PSTREAM_TIMEOUT_EVENTID, + WMI_NEIGHBOR_REPORT_EVENTID, + WMI_TKIP_MICERR_EVENTID, + WMI_SCAN_COMPLETE_EVENTID, + WMI_REPORT_STATISTICS_EVENTID, + WMI_RSSI_THRESHOLD_EVENTID, + WMI_ERROR_REPORT_EVENTID, + WMI_OPT_RX_FRAME_EVENTID, + WMI_REPORT_ROAM_TBL_EVENTID, + WMI_EXTENSION_EVENTID, + WMI_CAC_EVENTID, + WMI_SNR_THRESHOLD_EVENTID, + WMI_LQ_THRESHOLD_EVENTID, + WMI_TX_RETRY_ERR_EVENTID, + WMI_REPORT_ROAM_DATA_EVENTID, + WMI_TEST_EVENTID, + WMI_APLIST_EVENTID, + WMI_GET_WOW_LIST_EVENTID, + WMI_GET_PMKID_LIST_EVENTID +} WMI_EVENT_ID; + +typedef enum { + WMI_11A_CAPABILITY = 1, + WMI_11G_CAPABILITY = 2, + WMI_11AG_CAPABILITY = 3, +} WMI_PHY_CAPABILITY; + +typedef PREPACK struct { + A_UINT8 macaddr[ATH_MAC_LEN]; + A_UINT8 phyCapability; /* WMI_PHY_CAPABILITY */ +} POSTPACK WMI_READY_EVENT; + +/* + * Connect Event + */ +typedef PREPACK struct { + A_UINT16 channel; + A_UINT8 bssid[ATH_MAC_LEN]; + A_UINT16 listenInterval; + A_UINT16 beaconInterval; + A_UINT32 networkType; + A_UINT8 beaconIeLen; + A_UINT8 assocReqLen; + A_UINT8 assocRespLen; + A_UINT8 assocInfo[1]; +} POSTPACK WMI_CONNECT_EVENT; + +/* + * Disconnect Event + */ +typedef enum { + NO_NETWORK_AVAIL = 0x01, + LOST_LINK = 0x02, /* bmiss */ + DISCONNECT_CMD = 0x03, + BSS_DISCONNECTED = 0x04, + AUTH_FAILED = 0x05, + ASSOC_FAILED = 0x06, + NO_RESOURCES_AVAIL = 0x07, + CSERV_DISCONNECT = 0x08, + INVALID_PROFILE = 0x0a, + DOT11H_CHANNEL_SWITCH = 0x0b, +} WMI_DISCONNECT_REASON; + +typedef PREPACK struct { + A_UINT16 protocolReasonStatus; /* reason code, see 802.11 spec. */ + A_UINT8 bssid[ATH_MAC_LEN]; /* set if known */ + A_UINT8 disconnectReason ; /* see WMI_DISCONNECT_REASON */ + A_UINT8 assocRespLen; + A_UINT8 assocInfo[1]; +} POSTPACK WMI_DISCONNECT_EVENT; + +/* + * BSS Info Event. + * Mechanism used to inform host of the presence and characteristic of + * wireless networks present. Consists of bss info header followed by + * the beacon or probe-response frame body. The 802.11 header is not included. + */ +typedef enum { + BEACON_FTYPE = 0x1, + PROBERESP_FTYPE, + ACTION_MGMT_FTYPE, +} WMI_BI_FTYPE; + +enum { + BSS_ELEMID_CHANSWITCH = 0x01, + BSS_ELEMID_ATHEROS = 0x02, +}; + +typedef PREPACK struct { + A_UINT16 channel; + A_UINT8 frameType; /* see WMI_BI_FTYPE */ + A_UINT8 snr; + A_INT16 rssi; + A_UINT8 bssid[ATH_MAC_LEN]; + A_UINT32 ieMask; +} POSTPACK WMI_BSS_INFO_HDR; + +/* + * Command Error Event + */ +typedef enum { + INVALID_PARAM = 0x01, + ILLEGAL_STATE = 0x02, + INTERNAL_ERROR = 0x03, +} WMI_ERROR_CODE; + +typedef PREPACK struct { + A_UINT16 commandId; + A_UINT8 errorCode; +} POSTPACK WMI_CMD_ERROR_EVENT; + +/* + * New Regulatory Domain Event + */ +typedef PREPACK struct { + A_UINT32 regDomain; +} POSTPACK WMI_REG_DOMAIN_EVENT; + +typedef PREPACK struct { + A_UINT8 trafficClass; +} POSTPACK WMI_PSTREAM_TIMEOUT_EVENT; + +/* + * The WMI_NEIGHBOR_REPORT Event is generated by the target to inform + * the host of BSS's it has found that matches the current profile. + * It can be used by the host to cache PMKs and/to initiate pre-authentication + * if the BSS supports it. The first bssid is always the current associated + * BSS. + * The bssid and bssFlags information repeats according to the number + * or APs reported. + */ +typedef enum { + WMI_DEFAULT_BSS_FLAGS = 0x00, + WMI_PREAUTH_CAPABLE_BSS = 0x01, + WMI_PMKID_VALID_BSS = 0x02, +} WMI_BSS_FLAGS; + +typedef PREPACK struct { + A_UINT8 bssid[ATH_MAC_LEN]; + A_UINT8 bssFlags; /* see WMI_BSS_FLAGS */ +} POSTPACK WMI_NEIGHBOR_INFO; + +typedef PREPACK struct { + A_INT8 numberOfAps; + WMI_NEIGHBOR_INFO neighbor[1]; +} POSTPACK WMI_NEIGHBOR_REPORT_EVENT; + +/* + * TKIP MIC Error Event + */ +typedef PREPACK struct { + A_UINT8 keyid; + A_UINT8 ismcast; +} POSTPACK WMI_TKIP_MICERR_EVENT; + +/* + * WMI_SCAN_COMPLETE_EVENTID - no parameters (old), staus parameter (new) + */ +typedef PREPACK struct { + A_STATUS status; +} POSTPACK WMI_SCAN_COMPLETE_EVENT; + +#define MAX_OPT_DATA_LEN 1400 + +/* + * WMI_SET_ADHOC_BSSID_CMDID + */ +typedef PREPACK struct { + A_UINT8 bssid[ATH_MAC_LEN]; +} POSTPACK WMI_SET_ADHOC_BSSID_CMD; + +/* + * WMI_SET_OPT_MODE_CMDID + */ +typedef enum { + SPECIAL_OFF, + SPECIAL_ON, +} OPT_MODE_TYPE; + +typedef PREPACK struct { + A_UINT8 optMode; +} POSTPACK WMI_SET_OPT_MODE_CMD; + +/* + * WMI_TX_OPT_FRAME_CMDID + */ +typedef enum { + OPT_PROBE_REQ = 0x01, + OPT_PROBE_RESP = 0x02, + OPT_CPPP_START = 0x03, + OPT_CPPP_STOP = 0x04, +} WMI_OPT_FTYPE; + +typedef PREPACK struct { + A_UINT16 optIEDataLen; + A_UINT8 frmType; + A_UINT8 dstAddr[ATH_MAC_LEN]; + A_UINT8 bssid[ATH_MAC_LEN]; + A_UINT8 reserved; /* For alignment */ + A_UINT8 optIEData[1]; +} POSTPACK WMI_OPT_TX_FRAME_CMD; + +/* + * Special frame receive Event. + * Mechanism used to inform host of the receiption of the special frames. + * Consists of special frame info header followed by special frame body. + * The 802.11 header is not included. + */ +typedef PREPACK struct { + A_UINT16 channel; + A_UINT8 frameType; /* see WMI_OPT_FTYPE */ + A_INT8 snr; + A_UINT8 srcAddr[ATH_MAC_LEN]; + A_UINT8 bssid[ATH_MAC_LEN]; +} POSTPACK WMI_OPT_RX_INFO_HDR; + +/* + * Reporting statistics. + */ +typedef PREPACK struct { + A_UINT32 tx_packets; + A_UINT32 tx_bytes; + A_UINT32 tx_unicast_pkts; + A_UINT32 tx_unicast_bytes; + A_UINT32 tx_multicast_pkts; + A_UINT32 tx_multicast_bytes; + A_UINT32 tx_broadcast_pkts; + A_UINT32 tx_broadcast_bytes; + A_UINT32 tx_rts_success_cnt; + A_UINT32 tx_packet_per_ac[4]; + A_UINT32 tx_errors_per_ac[4]; + + A_UINT32 tx_errors; + A_UINT32 tx_failed_cnt; + A_UINT32 tx_retry_cnt; + A_UINT32 tx_rts_fail_cnt; + A_INT32 tx_unicast_rate; +}POSTPACK tx_stats_t; + +typedef PREPACK struct { + A_UINT32 rx_packets; + A_UINT32 rx_bytes; + A_UINT32 rx_unicast_pkts; + A_UINT32 rx_unicast_bytes; + A_UINT32 rx_multicast_pkts; + A_UINT32 rx_multicast_bytes; + A_UINT32 rx_broadcast_pkts; + A_UINT32 rx_broadcast_bytes; + A_UINT32 rx_fragment_pkt; + + A_UINT32 rx_errors; + A_UINT32 rx_crcerr; + A_UINT32 rx_key_cache_miss; + A_UINT32 rx_decrypt_err; + A_UINT32 rx_duplicate_frames; + A_INT32 rx_unicast_rate; +}POSTPACK rx_stats_t; + +typedef PREPACK struct { + A_UINT32 tkip_local_mic_failure; + A_UINT32 tkip_counter_measures_invoked; + A_UINT32 tkip_replays; + A_UINT32 tkip_format_errors; + A_UINT32 ccmp_format_errors; + A_UINT32 ccmp_replays; +}POSTPACK tkip_ccmp_stats_t; + +typedef PREPACK struct { + A_UINT32 power_save_failure_cnt; +}POSTPACK pm_stats_t; + +typedef PREPACK struct { + A_UINT32 cs_bmiss_cnt; + A_UINT32 cs_lowRssi_cnt; + A_UINT16 cs_connect_cnt; + A_UINT16 cs_disconnect_cnt; + A_INT16 cs_aveBeacon_rssi; + A_UINT16 cs_roam_count; + A_UINT16 cs_rssi; + A_UINT8 cs_snr; + A_UINT8 cs_aveBeacon_snr; + A_UINT8 cs_lastRoam_msec; +} POSTPACK cserv_stats_t; + +typedef PREPACK struct { + tx_stats_t tx_stats; + rx_stats_t rx_stats; + tkip_ccmp_stats_t tkipCcmpStats; +}POSTPACK wlan_net_stats_t; + +typedef PREPACK struct { + A_UINT32 wow_num_pkts_dropped; + A_UINT16 wow_num_events_discarded; + A_UINT8 wow_num_host_pkt_wakeups; + A_UINT8 wow_num_host_event_wakeups; +} POSTPACK wlan_wow_stats_t; + +typedef PREPACK struct { + A_UINT32 lqVal; + A_INT32 noise_floor_calibation; + pm_stats_t pmStats; + wlan_net_stats_t txrxStats; + wlan_wow_stats_t wowStats; + cserv_stats_t cservStats; +} POSTPACK WMI_TARGET_STATS; + +/* + * WMI_RSSI_THRESHOLD_EVENTID. + * Indicate the RSSI events to host. Events are indicated when we breach a + * thresold value. + */ +typedef enum{ + WMI_RSSI_THRESHOLD1_ABOVE = 0, + WMI_RSSI_THRESHOLD2_ABOVE, + WMI_RSSI_THRESHOLD3_ABOVE, + WMI_RSSI_THRESHOLD4_ABOVE, + WMI_RSSI_THRESHOLD5_ABOVE, + WMI_RSSI_THRESHOLD6_ABOVE, + WMI_RSSI_THRESHOLD1_BELOW, + WMI_RSSI_THRESHOLD2_BELOW, + WMI_RSSI_THRESHOLD3_BELOW, + WMI_RSSI_THRESHOLD4_BELOW, + WMI_RSSI_THRESHOLD5_BELOW, + WMI_RSSI_THRESHOLD6_BELOW +}WMI_RSSI_THRESHOLD_VAL; + +typedef PREPACK struct { + A_INT16 rssi; + A_UINT8 range; +}POSTPACK WMI_RSSI_THRESHOLD_EVENT; + +/* + * WMI_ERROR_REPORT_EVENTID + */ +typedef enum{ + WMI_TARGET_PM_ERR_FAIL = 0x00000001, + WMI_TARGET_KEY_NOT_FOUND = 0x00000002, + WMI_TARGET_DECRYPTION_ERR = 0x00000004, + WMI_TARGET_BMISS = 0x00000008, + WMI_PSDISABLE_NODE_JOIN = 0x00000010, + WMI_TARGET_COM_ERR = 0x00000020, + WMI_TARGET_FATAL_ERR = 0x00000040 +} WMI_TARGET_ERROR_VAL; + +typedef PREPACK struct { + A_UINT32 errorVal; +}POSTPACK WMI_TARGET_ERROR_REPORT_EVENT; + +typedef PREPACK struct { + A_UINT8 retrys; +}POSTPACK WMI_TX_RETRY_ERR_EVENT; + +typedef enum{ + WMI_SNR_THRESHOLD1_ABOVE = 1, + WMI_SNR_THRESHOLD1_BELOW, + WMI_SNR_THRESHOLD2_ABOVE, + WMI_SNR_THRESHOLD2_BELOW, + WMI_SNR_THRESHOLD3_ABOVE, + WMI_SNR_THRESHOLD3_BELOW, + WMI_SNR_THRESHOLD4_ABOVE, + WMI_SNR_THRESHOLD4_BELOW +} WMI_SNR_THRESHOLD_VAL; + +typedef PREPACK struct { + A_UINT8 range; /* WMI_SNR_THRESHOLD_VAL */ + A_UINT8 snr; +}POSTPACK WMI_SNR_THRESHOLD_EVENT; + +typedef enum{ + WMI_LQ_THRESHOLD1_ABOVE = 1, + WMI_LQ_THRESHOLD1_BELOW, + WMI_LQ_THRESHOLD2_ABOVE, + WMI_LQ_THRESHOLD2_BELOW, + WMI_LQ_THRESHOLD3_ABOVE, + WMI_LQ_THRESHOLD3_BELOW, + WMI_LQ_THRESHOLD4_ABOVE, + WMI_LQ_THRESHOLD4_BELOW +} WMI_LQ_THRESHOLD_VAL; + +typedef PREPACK struct { + A_INT32 lq; + A_UINT8 range; /* WMI_LQ_THRESHOLD_VAL */ +}POSTPACK WMI_LQ_THRESHOLD_EVENT; +/* + * WMI_REPORT_ROAM_TBL_EVENTID + */ +#define MAX_ROAM_TBL_CAND 5 + +typedef PREPACK struct { + A_INT32 roam_util; + A_UINT8 bssid[ATH_MAC_LEN]; + A_INT8 rssi; + A_INT8 rssidt; + A_INT8 last_rssi; + A_INT8 util; + A_INT8 bias; + A_UINT8 reserved; /* For alignment */ +} POSTPACK WMI_BSS_ROAM_INFO; + + +typedef PREPACK struct { + A_UINT16 roamMode; + A_UINT16 numEntries; + WMI_BSS_ROAM_INFO bssRoamInfo[1]; +} POSTPACK WMI_TARGET_ROAM_TBL; + +/* + * WMI_CAC_EVENTID + */ +typedef enum { + CAC_INDICATION_ADMISSION = 0x00, + CAC_INDICATION_ADMISSION_RESP = 0x01, + CAC_INDICATION_DELETE = 0x02, + CAC_INDICATION_NO_RESP = 0x03, +}CAC_INDICATION; + +#define WMM_TSPEC_IE_LEN 63 + +typedef PREPACK struct { + A_UINT8 ac; + A_UINT8 cac_indication; + A_UINT8 statusCode; + A_UINT8 tspecSuggestion[WMM_TSPEC_IE_LEN]; +}POSTPACK WMI_CAC_EVENT; + +/* + * WMI_APLIST_EVENTID + */ + +typedef enum { + APLIST_VER1 = 1, +} APLIST_VER; + +typedef PREPACK struct { + A_UINT8 bssid[ATH_MAC_LEN]; + A_UINT16 channel; +} POSTPACK WMI_AP_INFO_V1; + +typedef PREPACK union { + WMI_AP_INFO_V1 apInfoV1; +} POSTPACK WMI_AP_INFO; + +typedef PREPACK struct { + A_UINT8 apListVer; + A_UINT8 numAP; + WMI_AP_INFO apList[1]; +} POSTPACK WMI_APLIST_EVENT; + +/* + * developer commands + */ + +/* + * WMI_SET_BITRATE_CMDID + * + * Get bit rate cmd uses same definition as set bit rate cmd + */ +typedef enum { + RATE_AUTO = -1, + RATE_1Mb = 0, + RATE_2Mb = 1, + RATE_5_5Mb = 2, + RATE_11Mb = 3, + RATE_6Mb = 4, + RATE_9Mb = 5, + RATE_12Mb = 6, + RATE_18Mb = 7, + RATE_24Mb = 8, + RATE_36Mb = 9, + RATE_48Mb = 10, + RATE_54Mb = 11, +} WMI_BIT_RATE; + +typedef PREPACK struct { + A_INT8 rateIndex; /* see WMI_BIT_RATE */ +} POSTPACK WMI_BIT_RATE_CMD, WMI_BIT_RATE_REPLY; + +/* + * WMI_SET_FIXRATES_CMDID + * + * Get fix rates cmd uses same definition as set fix rates cmd + */ +typedef enum { + FIX_RATE_1Mb = 0x1, + FIX_RATE_2Mb = 0x2, + FIX_RATE_5_5Mb = 0x4, + FIX_RATE_11Mb = 0x8, + FIX_RATE_6Mb = 0x10, + FIX_RATE_9Mb = 0x20, + FIX_RATE_12Mb = 0x40, + FIX_RATE_18Mb = 0x80, + FIX_RATE_24Mb = 0x100, + FIX_RATE_36Mb = 0x200, + FIX_RATE_48Mb = 0x400, + FIX_RATE_54Mb = 0x800, +} WMI_FIX_RATES_MASK; + +typedef PREPACK struct { + A_UINT16 fixRateMask; /* see WMI_BIT_RATE */ +} POSTPACK WMI_FIX_RATES_CMD, WMI_FIX_RATES_REPLY; + +/* + * WMI_SET_RECONNECT_AUTH_MODE_CMDID + * + * Set authentication mode + */ +typedef enum { + RECONN_DO_AUTH = 0x00, + RECONN_NOT_AUTH = 0x01 +} WMI_AUTH_MODE; + +typedef PREPACK struct { + A_UINT8 mode; +} POSTPACK WMI_SET_AUTH_MODE_CMD; + +/* + * WMI_SET_REASSOC_MODE_CMDID + * + * Set authentication mode + */ +typedef enum { + REASSOC_DO_DISASSOC = 0x00, + REASSOC_DONOT_DISASSOC = 0x01 +} WMI_REASSOC_MODE; + +typedef PREPACK struct { + A_UINT8 mode; +}POSTPACK WMI_SET_REASSOC_MODE_CMD; + +typedef enum { + ROAM_DATA_TIME = 1, /* Get The Roam Time Data */ +} ROAM_DATA_TYPE; + +typedef PREPACK struct { + A_UINT32 disassoc_time; + A_UINT32 no_txrx_time; + A_UINT32 assoc_time; + A_UINT32 allow_txrx_time; + A_UINT32 last_data_txrx_time; + A_UINT32 first_data_txrx_time; + A_UINT8 disassoc_bssid[ATH_MAC_LEN]; + A_INT8 disassoc_bss_rssi; + A_UINT8 assoc_bssid[ATH_MAC_LEN]; + A_INT8 assoc_bss_rssi; +} POSTPACK WMI_TARGET_ROAM_TIME; + +typedef PREPACK struct { + PREPACK union { + WMI_TARGET_ROAM_TIME roamTime; + } POSTPACK u; + A_UINT8 roamDataType ; +} POSTPACK WMI_TARGET_ROAM_DATA; + +typedef enum { + WMI_WMM_DISABLED = 0, + WMI_WMM_ENABLED +} WMI_WMM_STATUS; + +typedef PREPACK struct { + A_UINT8 status; +}POSTPACK WMI_SET_WMM_CMD; + +typedef enum { + WMI_TXOP_DISABLED = 0, + WMI_TXOP_ENABLED +} WMI_TXOP_CFG; + +typedef PREPACK struct { + A_UINT8 txopEnable; +}POSTPACK WMI_SET_WMM_TXOP_CMD; + +typedef PREPACK struct { + A_UINT8 keepaliveInterval; +} POSTPACK WMI_SET_KEEPALIVE_CMD; + +typedef PREPACK struct { + A_BOOL configured; + A_UINT8 keepaliveInterval; +} POSTPACK WMI_GET_KEEPALIVE_CMD; + +/* + * Add Application specified IE to a management frame + */ +#define WMI_MAX_IE_LEN 78 + +typedef PREPACK struct { + A_UINT8 mgmtFrmType; /* one of WMI_MGMT_FRAME_TYPE */ + A_UINT8 ieLen; /* Length of the IE that should be added to the MGMT frame */ + A_UINT8 ieInfo[1]; +} POSTPACK WMI_SET_APPIE_CMD; + +/* + * Notify the WSC registration status to the target + */ +#define WSC_REG_ACTIVE 1 +#define WSC_REG_INACTIVE 0 +/* Generic Hal Interface for setting hal paramters. */ +/* Add new Set HAL Param cmdIds here for newer params */ +typedef enum { + WHAL_SETCABTO_CMDID = 1, +}WHAL_CMDID; + +typedef PREPACK struct { + A_UINT8 cabTimeOut; +} POSTPACK WHAL_SETCABTO_PARAM; + +typedef PREPACK struct { + A_UINT8 whalCmdId; + A_UINT8 data[1]; +} POSTPACK WHAL_PARAMCMD; + + +#define WOW_MAX_FILTER_LISTS 1 /*4*/ +#define WOW_MAX_FILTERS_PER_LIST 4 +#define WOW_PATTERN_SIZE 64 +#define WOW_MASK_SIZE 64 + +typedef PREPACK struct { + A_UINT8 wow_valid_filter; + A_UINT8 wow_filter_id; + A_UINT8 wow_filter_size; + A_UINT8 wow_filter_offset; + A_UINT8 wow_filter_mask[WOW_MASK_SIZE]; + A_UINT8 wow_filter_pattern[WOW_PATTERN_SIZE]; +} POSTPACK WOW_FILTER; + + +typedef PREPACK struct { + A_UINT8 wow_valid_list; + A_UINT8 wow_list_id; + A_UINT8 wow_num_filters; + A_UINT8 wow_total_list_size; + WOW_FILTER list[WOW_MAX_FILTERS_PER_LIST]; +} POSTPACK WOW_FILTER_LIST; + +typedef PREPACK struct { + A_BOOL awake; + A_BOOL asleep; +} POSTPACK WMI_SET_HOST_SLEEP_MODE_CMD; + +typedef PREPACK struct { + A_BOOL enable_wow; +} POSTPACK WMI_SET_WOW_MODE_CMD; + +typedef PREPACK struct { + A_UINT8 filter_list_id; +} POSTPACK WMI_GET_WOW_LIST_CMD; + +/* + * WMI_GET_WOW_LIST_CMD reply + */ +typedef PREPACK struct { + A_UINT8 num_filters; /* number of patterns in reply */ + A_UINT8 this_filter_num; /* this is filter # x of total num_filters */ + A_UINT8 wow_mode; + A_UINT8 host_mode; + WOW_FILTER wow_filters[1]; +} POSTPACK WMI_GET_WOW_LIST_REPLY; + +typedef PREPACK struct { + A_UINT8 filter_list_id; + A_UINT8 filter_size; + A_UINT8 filter_offset; + A_UINT8 filter[1]; +} POSTPACK WMI_ADD_WOW_PATTERN_CMD; + +typedef PREPACK struct { + A_UINT16 filter_list_id; + A_UINT16 filter_id; +} POSTPACK WMI_DEL_WOW_PATTERN_CMD; + +typedef PREPACK struct { + A_UINT8 macaddr[ATH_MAC_LEN]; +} POSTPACK WMI_SET_MAC_ADDRESS_CMD; + +/* + * WMI_SET_AKMP_PARAMS_CMD + */ + +#define WMI_AKMP_MULTI_PMKID_EN 0x000001 + +typedef PREPACK struct { + A_UINT32 akmpInfo; +} POSTPACK WMI_SET_AKMP_PARAMS_CMD; + +typedef PREPACK struct { + A_UINT8 pmkid[WMI_PMKID_LEN]; +} POSTPACK WMI_PMKID; + +/* + * WMI_SET_PMKID_LIST_CMD + */ +#define WMI_MAX_PMKID_CACHE 8 + +typedef PREPACK struct { + A_UINT32 numPMKID; + WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE]; +} POSTPACK WMI_SET_PMKID_LIST_CMD; + +/* + * WMI_GET_PMKID_LIST_CMD Reply + * Following the Number of PMKIDs is the list of PMKIDs + */ +typedef PREPACK struct { + A_UINT32 numPMKID; + WMI_PMKID pmkidList[1]; +} POSTPACK WMI_PMKID_LIST_REPLY; + +/* index used for priority streams */ +typedef enum { + WMI_NOT_MAPPED = -1, + WMI_CONTROL_PRI = 0, + WMI_BEST_EFFORT_PRI = 1, + WMI_LOW_PRI = 2, + WMI_HIGH_PRI = 3, + WMI_HIGHEST_PRI, + WMI_PRI_MAX_COUNT +} WMI_PRI_STREAM_ID; + +#ifndef ATH_TARGET +#include "athendpack.h" +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* _WMI_H_ */ diff --git a/drivers/ar6000/include/wmi_api.h b/drivers/ar6000/include/wmi_api.h new file mode 100644 index 00000000000..267edfd0a9a --- /dev/null +++ b/drivers/ar6000/include/wmi_api.h @@ -0,0 +1,260 @@ +#ifndef _WMI_API_H_ +#define _WMI_API_H_ +/* + * Copyright (c) 2004-2006 Atheros Communications Inc. + * All rights reserved. + * + * This file contains the definitions for the Wireless Module Interface (WMI). + * + * $Id: //depot/sw/releases/olca2.0-GPL/host/include/wmi_api.h#2 $ + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * IP QoS Field definitions according to 802.1p + */ +#define BEST_EFFORT_PRI 0 +#define BACKGROUND_PRI 1 +#define EXCELLENT_EFFORT_PRI 3 +#define CONTROLLED_LOAD_PRI 4 +#define VIDEO_PRI 5 +#define VOICE_PRI 6 +#define NETWORK_CONTROL_PRI 7 +#define MAX_NUM_PRI 8 + +#define UNDEFINED_PRI (0xff) + +/* simple mapping of IP TOS field to a WMI priority stream + * this mapping was taken from the original linux driver implementation + * The operation maps the following + * + * */ +#define IP_TOS_TO_WMI_PRI(tos) \ + ((WMI_PRI_STREAM_ID)(((tos) >> 1) & 0x03)) + +#define WMI_IMPLICIT_PSTREAM_INACTIVITY_INT 5000 /* 5 seconds */ + + +struct wmi_t; + +void *wmi_init(void *devt); + +void wmi_qos_state_init(struct wmi_t *wmip); +void wmi_shutdown(struct wmi_t *wmip); +A_UINT16 wmi_get_mapped_qos_queue(struct wmi_t *, A_UINT8); +A_STATUS wmi_dix_2_dot3(struct wmi_t *wmip, void *osbuf); +A_STATUS wmi_data_hdr_add(struct wmi_t *wmip, void *osbuf, A_UINT8 msgType); +A_STATUS wmi_dot3_2_dix(struct wmi_t *wmip, void *osbuf); +A_STATUS wmi_data_hdr_remove(struct wmi_t *wmip, void *osbuf); +A_STATUS wmi_syncpoint(struct wmi_t *wmip); +A_STATUS wmi_syncpoint_reset(struct wmi_t *wmip); +WMI_PRI_STREAM_ID wmi_get_stream_id(struct wmi_t *wmip, A_UINT8 trafficClass); +A_UINT8 wmi_implicit_create_pstream(struct wmi_t *wmip, void *osbuf, A_UINT8 dir, A_UINT8 up); + +A_STATUS wmi_control_rx(struct wmi_t *wmip, void *osbuf); +void wmi_iterate_nodes(struct wmi_t *wmip, wlan_node_iter_func *f, void *arg); +void wmi_free_allnodes(struct wmi_t *wmip); +bss_t *wmi_find_node(struct wmi_t *wmip, const A_UINT8 *macaddr); + + +typedef enum { + NO_SYNC_WMIFLAG = 0, + SYNC_BEFORE_WMIFLAG, /* transmit all queued data before cmd */ + SYNC_AFTER_WMIFLAG, /* any new data waits until cmd execs */ + SYNC_BOTH_WMIFLAG, + END_WMIFLAG /* end marker */ +} WMI_SYNC_FLAG; + +A_STATUS wmi_cmd_send(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId, + WMI_SYNC_FLAG flag); +A_STATUS wmi_connect_cmd(struct wmi_t *wmip, + NETWORK_TYPE netType, + DOT11_AUTH_MODE dot11AuthMode, + AUTH_MODE authMode, + CRYPTO_TYPE pairwiseCrypto, + A_UINT8 pairwiseCryptoLen, + CRYPTO_TYPE groupCrypto, + A_UINT8 groupCryptoLen, + int ssidLength, + A_UCHAR *ssid, + A_UINT8 *bssid, + A_UINT16 channel, + A_UINT32 ctrl_flags); +A_STATUS wmi_reconnect_cmd(struct wmi_t *wmip, + A_UINT8 *bssid, + A_UINT16 channel); +A_STATUS wmi_disconnect_cmd(struct wmi_t *wmip); +A_STATUS wmi_getrev_cmd(struct wmi_t *wmip); +A_STATUS wmi_startscan_cmd(struct wmi_t *wmip, WMI_SCAN_TYPE scanType, + A_BOOL forceFgScan, A_BOOL isLegacy, + A_UINT32 homeDwellTime, A_UINT32 forceScanInterval); +A_STATUS wmi_scanparams_cmd(struct wmi_t *wmip, A_UINT16 fg_start_sec, + A_UINT16 fg_end_sec, A_UINT16 bg_sec, + A_UINT16 minact_chdw_msec, + A_UINT16 maxact_chdw_msec, A_UINT16 pas_chdw_msec, + A_UINT8 shScanRatio, A_UINT8 scanCtrlFlags, + A_UINT32 max_dfsch_act_time); +A_STATUS wmi_bssfilter_cmd(struct wmi_t *wmip, A_UINT8 filter, A_UINT32 ieMask); +A_STATUS wmi_probedSsid_cmd(struct wmi_t *wmip, A_UINT8 index, A_UINT8 flag, + A_UINT8 ssidLength, A_UCHAR *ssid); +A_STATUS wmi_listeninterval_cmd(struct wmi_t *wmip, A_UINT16 listenInterval, A_UINT16 listenBeacons); +A_STATUS wmi_bmisstime_cmd(struct wmi_t *wmip, A_UINT16 bmisstime, A_UINT16 bmissbeacons); +A_STATUS wmi_associnfo_cmd(struct wmi_t *wmip, A_UINT8 ieType, + A_UINT8 ieLen, A_UINT8 *ieInfo); +A_STATUS wmi_powermode_cmd(struct wmi_t *wmip, A_UINT8 powerMode); +A_STATUS wmi_ibsspmcaps_cmd(struct wmi_t *wmip, A_UINT8 pmEnable, A_UINT8 ttl, + A_UINT16 atim_windows, A_UINT16 timeout_value); +A_STATUS wmi_pmparams_cmd(struct wmi_t *wmip, A_UINT16 idlePeriod, + A_UINT16 psPollNum, A_UINT16 dtimPolicy); +A_STATUS wmi_disctimeout_cmd(struct wmi_t *wmip, A_UINT8 timeout); +A_STATUS wmi_sync_cmd(struct wmi_t *wmip, A_UINT8 syncNumber); +A_STATUS wmi_create_pstream_cmd(struct wmi_t *wmip, WMI_CREATE_PSTREAM_CMD *pstream); +A_STATUS wmi_delete_pstream_cmd(struct wmi_t *wmip, A_UINT8 trafficClass, A_UINT8 streamID); +A_STATUS wmi_set_bitrate_cmd(struct wmi_t *wmip, A_INT32 rate); +A_STATUS wmi_get_bitrate_cmd(struct wmi_t *wmip); +A_INT8 wmi_validate_bitrate(struct wmi_t *wmip, A_INT32 rate); +A_STATUS wmi_get_regDomain_cmd(struct wmi_t *wmip); +A_STATUS wmi_get_channelList_cmd(struct wmi_t *wmip); +A_STATUS wmi_set_channelParams_cmd(struct wmi_t *wmip, A_UINT8 scanParam, + WMI_PHY_MODE mode, A_INT8 numChan, + A_UINT16 *channelList); + +A_STATUS wmi_set_snr_threshold_params(struct wmi_t *wmip, + WMI_SNR_THRESHOLD_PARAMS_CMD *snrCmd); +A_STATUS wmi_set_rssi_threshold_params(struct wmi_t *wmip, + WMI_RSSI_THRESHOLD_PARAMS_CMD *rssiCmd); +A_STATUS wmi_clr_rssi_snr(struct wmi_t *wmip); +A_STATUS wmi_set_lq_threshold_params(struct wmi_t *wmip, + WMI_LQ_THRESHOLD_PARAMS_CMD *lqCmd); +A_STATUS wmi_set_rts_cmd(struct wmi_t *wmip, A_UINT16 threshold); +A_STATUS wmi_set_lpreamble_cmd(struct wmi_t *wmip, A_UINT8 status); + +A_STATUS wmi_set_error_report_bitmask(struct wmi_t *wmip, A_UINT32 bitmask); + +A_STATUS wmi_get_challenge_resp_cmd(struct wmi_t *wmip, A_UINT32 cookie, + A_UINT32 source); +A_STATUS wmi_config_debug_module_cmd(struct wmi_t *wmip, A_UINT16 mmask, + A_UINT16 tsr, A_BOOL rep, A_UINT16 size, + A_UINT32 valid); +A_STATUS wmi_get_stats_cmd(struct wmi_t *wmip); +A_STATUS wmi_addKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex, + CRYPTO_TYPE keyType, A_UINT8 keyUsage, + A_UINT8 keyLength,A_UINT8 *keyRSC, + A_UINT8 *keyMaterial, A_UINT8 key_op_ctrl, + WMI_SYNC_FLAG sync_flag); +A_STATUS wmi_add_krk_cmd(struct wmi_t *wmip, A_UINT8 *krk); +A_STATUS wmi_delete_krk_cmd(struct wmi_t *wmip); +A_STATUS wmi_deleteKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex); +A_STATUS wmi_set_akmp_params_cmd(struct wmi_t *wmip, + WMI_SET_AKMP_PARAMS_CMD *akmpParams); +A_STATUS wmi_get_pmkid_list_cmd(struct wmi_t *wmip); +A_STATUS wmi_set_pmkid_list_cmd(struct wmi_t *wmip, + WMI_SET_PMKID_LIST_CMD *pmkInfo); +A_STATUS wmi_set_txPwr_cmd(struct wmi_t *wmip, A_UINT8 dbM); +A_STATUS wmi_get_txPwr_cmd(struct wmi_t *wmip); +A_STATUS wmi_switch_radio(struct wmi_t *wmip, A_UINT8 on); +A_STATUS wmi_addBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex, A_UINT8 *bssid); +A_STATUS wmi_deleteBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex); +A_STATUS wmi_set_tkip_countermeasures_cmd(struct wmi_t *wmip, A_BOOL en); +A_STATUS wmi_setPmkid_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT8 *pmkId, + A_BOOL set); +A_STATUS wmi_set_access_params_cmd(struct wmi_t *wmip, A_UINT16 txop, + A_UINT8 eCWmin, A_UINT8 eCWmax, + A_UINT8 aifsn); +A_STATUS wmi_set_retry_limits_cmd(struct wmi_t *wmip, A_UINT8 frameType, + A_UINT8 trafficClass, A_UINT8 maxRetries, + A_UINT8 enableNotify); + +void wmi_get_current_bssid(struct wmi_t *wmip, A_UINT8 *bssid); + +A_STATUS wmi_get_roam_tbl_cmd(struct wmi_t *wmip); +A_STATUS wmi_get_roam_data_cmd(struct wmi_t *wmip, A_UINT8 roamDataType); +A_STATUS wmi_set_roam_ctrl_cmd(struct wmi_t *wmip, WMI_SET_ROAM_CTRL_CMD *p, + A_UINT8 size); +A_STATUS wmi_set_powersave_timers_cmd(struct wmi_t *wmip, + WMI_POWERSAVE_TIMERS_POLICY_CMD *pCmd, + A_UINT8 size); + +A_STATUS wmi_set_opt_mode_cmd(struct wmi_t *wmip, A_UINT8 optMode); +A_STATUS wmi_opt_tx_frame_cmd(struct wmi_t *wmip, + A_UINT8 frmType, + A_UINT8 *dstMacAddr, + A_UINT8 *bssid, + A_UINT16 optIEDataLen, + A_UINT8 *optIEData); + +A_STATUS wmi_set_adhoc_bconIntvl_cmd(struct wmi_t *wmip, A_UINT16 intvl); +A_STATUS wmi_set_voice_pkt_size_cmd(struct wmi_t *wmip, A_UINT16 voicePktSize); +A_STATUS wmi_set_max_sp_len_cmd(struct wmi_t *wmip, A_UINT8 maxSpLen); +A_UINT8 convert_userPriority_to_trafficClass(A_UINT8 userPriority); +A_UINT8 wmi_get_power_mode_cmd(struct wmi_t *wmip); +A_STATUS wmi_verify_tspec_params(WMI_CREATE_PSTREAM_CMD *pCmd, A_BOOL tspecCompliance); + +#ifdef CONFIG_HOST_TCMD_SUPPORT +A_STATUS wmi_test_cmd(struct wmi_t *wmip, A_UINT8 *buf, A_UINT32 len); +#endif + +A_STATUS wmi_set_bt_status_cmd(struct wmi_t *wmip, A_UINT8 streamType, A_UINT8 status); +A_STATUS wmi_set_bt_params_cmd(struct wmi_t *wmip, WMI_SET_BT_PARAMS_CMD* cmd); + + +/* + * This function is used to configure the fix rates mask to the target. + */ +A_STATUS wmi_set_fixrates_cmd(struct wmi_t *wmip, A_INT16 fixRatesMask); +A_STATUS wmi_get_ratemask_cmd(struct wmi_t *wmip); + +A_STATUS wmi_set_authmode_cmd(struct wmi_t *wmip, A_UINT8 mode); + +A_STATUS wmi_set_reassocmode_cmd(struct wmi_t *wmip, A_UINT8 mode); + +A_STATUS wmi_set_wmm_cmd(struct wmi_t *wmip, WMI_WMM_STATUS status); +A_STATUS wmi_set_wmm_txop(struct wmi_t *wmip, WMI_TXOP_CFG txEnable); + +A_STATUS wmi_get_keepalive_configured(struct wmi_t *wmip); +A_UINT8 wmi_get_keepalive_cmd(struct wmi_t *wmip); +A_STATUS wmi_set_keepalive_cmd(struct wmi_t *wmip, A_UINT8 keepaliveInterval); + +A_STATUS wmi_set_appie_cmd(struct wmi_t *wmip, A_UINT8 mgmtFrmType, + A_UINT8 ieLen,A_UINT8 *ieInfo); + +A_STATUS wmi_set_halparam_cmd(struct wmi_t *wmip, A_UINT8 *cmd, A_UINT16 dataLen); +A_INT32 wmi_get_rate(A_INT8 rateindex); + +/*Wake on Wireless WMI commands*/ +A_STATUS wmi_set_host_sleep_mode_cmd(struct wmi_t *wmip, WMI_SET_HOST_SLEEP_MODE_CMD *cmd); +A_STATUS wmi_set_wow_mode_cmd(struct wmi_t *wmip, WMI_SET_WOW_MODE_CMD *cmd); +A_STATUS wmi_get_wow_list_cmd(struct wmi_t *wmip, WMI_GET_WOW_LIST_CMD *cmd); +A_STATUS wmi_add_wow_pattern_cmd(struct wmi_t *wmip, + WMI_ADD_WOW_PATTERN_CMD *cmd, A_UINT8* pattern, A_UINT8* mask, A_UINT8 pattern_size); +A_STATUS wmi_del_wow_pattern_cmd(struct wmi_t *wmip, + WMI_DEL_WOW_PATTERN_CMD *cmd); +A_STATUS wmi_set_wsc_status_cmd(struct wmi_t *wmip, A_UINT32 status); + +bss_t * +wmi_find_Ssidnode (struct wmi_t *wmip, A_UCHAR *pSsid, + A_UINT32 ssidLength, A_BOOL bIsWPA2); + +void +wmi_node_return (struct wmi_t *wmip, bss_t *bss); +#ifdef __cplusplus +} +#endif + +#endif /* _WMI_API_H_ */ diff --git a/drivers/ar6000/include/wmix.h b/drivers/ar6000/include/wmix.h new file mode 100644 index 00000000000..8f12b5e5586 --- /dev/null +++ b/drivers/ar6000/include/wmix.h @@ -0,0 +1,233 @@ +/* + * Copyright (c) 2004-2005 Atheros Communications Inc. + * All rights reserved. + * + * + * $ATH_LICENSE_HOSTSDK0_C$ + * + * This file contains extensions of the WMI protocol specified in the + * Wireless Module Interface (WMI). It includes definitions of all + * extended commands and events. Extensions include useful commands + * that are not directly related to wireless activities. They may + * be hardware-specific, and they might not be supported on all + * implementations. + * + * Extended WMIX commands are encapsulated in a WMI message with + * cmd=WMI_EXTENSION_CMD. + * + */ + +#ifndef _WMIX_H_ +#define _WMIX_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#ifndef ATH_TARGET +#include "athstartpack.h" +#endif + +#include "dbglog.h" + +/* + * Extended WMI commands are those that are needed during wireless + * operation, but which are not really wireless commands. This allows, + * for instance, platform-specific commands. Extended WMI commands are + * embedded in a WMI command message with WMI_COMMAND_ID=WMI_EXTENSION_CMDID. + * Extended WMI events are similarly embedded in a WMI event message with + * WMI_EVENT_ID=WMI_EXTENSION_EVENTID. + */ +typedef PREPACK struct { + A_UINT32 commandId; +} POSTPACK WMIX_CMD_HDR; + +typedef enum { + WMIX_DSETOPEN_REPLY_CMDID = 0x2001, + WMIX_DSETDATA_REPLY_CMDID, + WMIX_GPIO_OUTPUT_SET_CMDID, + WMIX_GPIO_INPUT_GET_CMDID, + WMIX_GPIO_REGISTER_SET_CMDID, + WMIX_GPIO_REGISTER_GET_CMDID, + WMIX_GPIO_INTR_ACK_CMDID, + WMIX_HB_CHALLENGE_RESP_CMDID, + WMIX_DBGLOG_CFG_MODULE_CMDID, +} WMIX_COMMAND_ID; + +typedef enum { + WMIX_DSETOPENREQ_EVENTID = 0x3001, + WMIX_DSETCLOSE_EVENTID, + WMIX_DSETDATAREQ_EVENTID, + WMIX_GPIO_INTR_EVENTID, + WMIX_GPIO_DATA_EVENTID, + WMIX_GPIO_ACK_EVENTID, + WMIX_HB_CHALLENGE_RESP_EVENTID, + WMIX_DBGLOG_EVENTID, +} WMIX_EVENT_ID; + +/* + * =============DataSet support================= + */ + +/* + * WMIX_DSETOPENREQ_EVENTID + * DataSet Open Request Event + */ +typedef PREPACK struct { + A_UINT32 dset_id; + A_UINT32 targ_dset_handle; /* echo'ed, not used by Host, */ + A_UINT32 targ_reply_fn; /* echo'ed, not used by Host, */ + A_UINT32 targ_reply_arg; /* echo'ed, not used by Host, */ +} POSTPACK WMIX_DSETOPENREQ_EVENT; + +/* + * WMIX_DSETCLOSE_EVENTID + * DataSet Close Event + */ +typedef PREPACK struct { + A_UINT32 access_cookie; +} POSTPACK WMIX_DSETCLOSE_EVENT; + +/* + * WMIX_DSETDATAREQ_EVENTID + * DataSet Data Request Event + */ +typedef PREPACK struct { + A_UINT32 access_cookie; + A_UINT32 offset; + A_UINT32 length; + A_UINT32 targ_buf; /* echo'ed, not used by Host, */ + A_UINT32 targ_reply_fn; /* echo'ed, not used by Host, */ + A_UINT32 targ_reply_arg; /* echo'ed, not used by Host, */ +} POSTPACK WMIX_DSETDATAREQ_EVENT; + +typedef PREPACK struct { + A_UINT32 status; + A_UINT32 targ_dset_handle; + A_UINT32 targ_reply_fn; + A_UINT32 targ_reply_arg; + A_UINT32 access_cookie; + A_UINT32 size; + A_UINT32 version; +} POSTPACK WMIX_DSETOPEN_REPLY_CMD; + +typedef PREPACK struct { + A_UINT32 status; + A_UINT32 targ_buf; + A_UINT32 targ_reply_fn; + A_UINT32 targ_reply_arg; + A_UINT32 length; + A_UINT8 buf[1]; +} POSTPACK WMIX_DSETDATA_REPLY_CMD; + + +/* + * =============GPIO support================= + * All masks are 18-bit masks with bit N operating on GPIO pin N. + */ + +#include "gpio.h" + +/* + * Set GPIO pin output state. + * In order for output to be driven, a pin must be enabled for output. + * This can be done during initialization through the GPIO Configuration + * DataSet, or during operation with the enable_mask. + * + * If a request is made to simultaneously set/clear or set/disable or + * clear/disable or disable/enable, results are undefined. + */ +typedef PREPACK struct { + A_UINT32 set_mask; /* pins to set */ + A_UINT32 clear_mask; /* pins to clear */ + A_UINT32 enable_mask; /* pins to enable for output */ + A_UINT32 disable_mask; /* pins to disable/tristate */ +} POSTPACK WMIX_GPIO_OUTPUT_SET_CMD; + +/* + * Set a GPIO register. For debug/exceptional cases. + * Values for gpioreg_id are GPIO_REGISTER_IDs, defined in a + * platform-dependent header. + */ +typedef PREPACK struct { + A_UINT32 gpioreg_id; /* GPIO register ID */ + A_UINT32 value; /* value to write */ +} POSTPACK WMIX_GPIO_REGISTER_SET_CMD; + +/* Get a GPIO register. For debug/exceptional cases. */ +typedef PREPACK struct { + A_UINT32 gpioreg_id; /* GPIO register to read */ +} POSTPACK WMIX_GPIO_REGISTER_GET_CMD; + +/* + * Host acknowledges and re-arms GPIO interrupts. A single + * message should be used to acknowledge all interrupts that + * were delivered in an earlier WMIX_GPIO_INTR_EVENT message. + */ +typedef PREPACK struct { + A_UINT32 ack_mask; /* interrupts to acknowledge */ +} POSTPACK WMIX_GPIO_INTR_ACK_CMD; + +/* + * Target informs Host of GPIO interrupts that have ocurred since the + * last WMIX_GIPO_INTR_ACK_CMD was received. Additional information -- + * the current GPIO input values is provided -- in order to support + * use of a GPIO interrupt as a Data Valid signal for other GPIO pins. + */ +typedef PREPACK struct { + A_UINT32 intr_mask; /* pending GPIO interrupts */ + A_UINT32 input_values; /* recent GPIO input values */ +} POSTPACK WMIX_GPIO_INTR_EVENT; + +/* + * Target responds to Host's earlier WMIX_GPIO_INPUT_GET_CMDID request + * using a GPIO_DATA_EVENT with + * value set to the mask of GPIO pin inputs and + * reg_id set to GPIO_ID_NONE + * + * + * Target responds to Hosts's earlier WMIX_GPIO_REGISTER_GET_CMDID request + * using a GPIO_DATA_EVENT with + * value set to the value of the requested register and + * reg_id identifying the register (reflects the original request) + * NB: reg_id supports the future possibility of unsolicited + * WMIX_GPIO_DATA_EVENTs (for polling GPIO input), and it may + * simplify Host GPIO support. + */ +typedef PREPACK struct { + A_UINT32 value; + A_UINT32 reg_id; +} POSTPACK WMIX_GPIO_DATA_EVENT; + +/* + * =============Error Detection support================= + */ + +/* + * WMIX_HB_CHALLENGE_RESP_CMDID + * Heartbeat Challenge Response command + */ +typedef PREPACK struct { + A_UINT32 cookie; + A_UINT32 source; +} POSTPACK WMIX_HB_CHALLENGE_RESP_CMD; + +/* + * WMIX_HB_CHALLENGE_RESP_EVENTID + * Heartbeat Challenge Response Event + */ +#define WMIX_HB_CHALLENGE_RESP_EVENT WMIX_HB_CHALLENGE_RESP_CMD + +typedef PREPACK struct { + struct dbglog_config_s config; +} POSTPACK WMIX_DBGLOG_CFG_MODULE_CMD; + +#ifndef ATH_TARGET +#include "athendpack.h" +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* _WMIX_H_ */ diff --git a/drivers/ar6000/miscdrv/common_drv.c b/drivers/ar6000/miscdrv/common_drv.c new file mode 100644 index 00000000000..4f127346665 --- /dev/null +++ b/drivers/ar6000/miscdrv/common_drv.c @@ -0,0 +1,467 @@ + +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "a_config.h" +#include "athdefs.h" +#include "a_types.h" +#include "AR6Khwreg.h" +#include "targaddrs.h" +#include "a_osapi.h" +#include "hif.h" +#include "htc_api.h" +#include "bmi.h" +#include "bmi_msg.h" +#include "common_drv.h" +#include "a_debug.h" +#include "targaddrs.h" + +#define HOST_INTEREST_ITEM_ADDRESS(target, item) \ +(((TargetType) == TARGET_TYPE_AR6001) ? \ + AR6001_HOST_INTEREST_ITEM_ADDRESS(item) : \ + AR6002_HOST_INTEREST_ITEM_ADDRESS(item)) + + +/* Compile the 4BYTE version of the window register setup routine, + * This mitigates host interconnect issues with non-4byte aligned bus requests, some + * interconnects use bus adapters that impose strict limitations. + * Since diag window access is not intended for performance critical operations, the 4byte mode should + * be satisfactory even though it generates 4X the bus activity. */ + +#ifdef USE_4BYTE_REGISTER_ACCESS + + /* set the window address register (using 4-byte register access ). */ +A_STATUS ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, A_UINT32 RegisterAddr, A_UINT32 Address) +{ + A_STATUS status; + A_UINT8 addrValue[4]; + int i; + + /* write bytes 1,2,3 of the register to set the upper address bytes, the LSB is written + * last to initiate the access cycle */ + + for (i = 1; i <= 3; i++) { + /* fill the buffer with the address byte value we want to hit 4 times*/ + addrValue[0] = ((A_UINT8 *)&Address)[i]; + addrValue[1] = addrValue[0]; + addrValue[2] = addrValue[0]; + addrValue[3] = addrValue[0]; + + /* hit each byte of the register address with a 4-byte write operation to the same address, + * this is a harmless operation */ + status = HIFReadWrite(hifDevice, + RegisterAddr+i, + addrValue, + 4, + HIF_WR_SYNC_BYTE_FIX, + NULL); + if (status != A_OK) { + break; + } + } + + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n", + RegisterAddr, Address)); + return status; + } + + /* write the address register again, this time write the whole 4-byte value. + * The effect here is that the LSB write causes the cycle to start, the extra + * 3 byte write to bytes 1,2,3 has no effect since we are writing the same values again */ + status = HIFReadWrite(hifDevice, + RegisterAddr, + (A_UCHAR *)(&Address), + 4, + HIF_WR_SYNC_BYTE_INC, + NULL); + + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n", + RegisterAddr, Address)); + return status; + } + + return A_OK; + + + +} + + +#else + + /* set the window address register */ +A_STATUS ar6000_SetAddressWindowRegister(HIF_DEVICE *hifDevice, A_UINT32 RegisterAddr, A_UINT32 Address) +{ + A_STATUS status; + + /* write bytes 1,2,3 of the register to set the upper address bytes, the LSB is written + * last to initiate the access cycle */ + status = HIFReadWrite(hifDevice, + RegisterAddr+1, /* write upper 3 bytes */ + ((A_UCHAR *)(&Address))+1, + sizeof(A_UINT32)-1, + HIF_WR_SYNC_BYTE_INC, + NULL); + + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write initial bytes of 0x%x to window reg: 0x%X \n", + RegisterAddr, Address)); + return status; + } + + /* write the LSB of the register, this initiates the operation */ + status = HIFReadWrite(hifDevice, + RegisterAddr, + (A_UCHAR *)(&Address), + sizeof(A_UINT8), + HIF_WR_SYNC_BYTE_INC, + NULL); + + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to window reg: 0x%X \n", + RegisterAddr, Address)); + return status; + } + + return A_OK; +} + +#endif + +/* + * Read from the AR6000 through its diagnostic window. + * No cooperation from the Target is required for this. + */ +A_STATUS +ar6000_ReadRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data) +{ + A_STATUS status; + + /* set window register to start read cycle */ + status = ar6000_SetAddressWindowRegister(hifDevice, + WINDOW_READ_ADDR_ADDRESS, + *address); + + if (status != A_OK) { + return status; + } + + /* read the data */ + status = HIFReadWrite(hifDevice, + WINDOW_DATA_ADDRESS, + (A_UCHAR *)data, + sizeof(A_UINT32), + HIF_RD_SYNC_BYTE_INC, + NULL); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot read from WINDOW_DATA_ADDRESS\n")); + return status; + } + + return status; +} + + +/* + * Write to the AR6000 through its diagnostic window. + * No cooperation from the Target is required for this. + */ +A_STATUS +ar6000_WriteRegDiag(HIF_DEVICE *hifDevice, A_UINT32 *address, A_UINT32 *data) +{ + A_STATUS status; + + /* set write data */ + status = HIFReadWrite(hifDevice, + WINDOW_DATA_ADDRESS, + (A_UCHAR *)data, + sizeof(A_UINT32), + HIF_WR_SYNC_BYTE_INC, + NULL); + if (status != A_OK) { + AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot write 0x%x to WINDOW_DATA_ADDRESS\n", *data)); + return status; + } + + /* set window register, which starts the write cycle */ + return ar6000_SetAddressWindowRegister(hifDevice, + WINDOW_WRITE_ADDR_ADDRESS, + *address); +} + +A_STATUS +ar6000_ReadDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address, + A_UCHAR *data, A_UINT32 length) +{ + A_UINT32 count; + A_STATUS status = A_OK; + + for (count = 0; count < length; count += 4, address += 4) { + if ((status = ar6000_ReadRegDiag(hifDevice, &address, + (A_UINT32 *)&data[count])) != A_OK) + { + break; + } + } + + return status; +} + +A_STATUS +ar6000_WriteDataDiag(HIF_DEVICE *hifDevice, A_UINT32 address, + A_UCHAR *data, A_UINT32 length) +{ + A_UINT32 count; + A_STATUS status = A_OK; + + for (count = 0; count < length; count += 4, address += 4) { + if ((status = ar6000_WriteRegDiag(hifDevice, &address, + (A_UINT32 *)&data[count])) != A_OK) + { + break; + } + } + + return status; +} + +A_STATUS +ar6000_reset_device_skipflash(HIF_DEVICE *hifDevice) +{ + int i; + struct forceROM_s { + A_UINT32 addr; + A_UINT32 data; + }; + struct forceROM_s *ForceROM; + int szForceROM; + A_UINT32 instruction; + + static struct forceROM_s ForceROM_REV2[] = { + /* NB: This works for old REV2 ROM (old). */ + {0x00001ff0, 0x175b0027}, /* jump instruction at 0xa0001ff0 */ + {0x00001ff4, 0x00000000}, /* nop instruction at 0xa0001ff4 */ + + {MC_REMAP_TARGET_ADDRESS, 0x00001ff0}, /* remap to 0xa0001ff0 */ + {MC_REMAP_COMPARE_ADDRESS, 0x01000040},/* ...from 0xbfc00040 */ + {MC_REMAP_SIZE_ADDRESS, 0x00000000}, /* ...1 cache line */ + {MC_REMAP_VALID_ADDRESS, 0x00000001}, /* ...remap is valid */ + + {LOCAL_COUNT_ADDRESS+0x10, 0}, /* clear BMI credit counter */ + + {RESET_CONTROL_ADDRESS, RESET_CONTROL_WARM_RST_MASK}, + }; + + static struct forceROM_s ForceROM_NEW[] = { + /* NB: This works for AR6000 ROM REV3 and beyond. */ + {LOCAL_SCRATCH_ADDRESS, AR6K_OPTION_IGNORE_FLASH}, + {LOCAL_COUNT_ADDRESS+0x10, 0}, /* clear BMI credit counter */ + {RESET_CONTROL_ADDRESS, RESET_CONTROL_WARM_RST_MASK}, + }; + + /* + * Examine a semi-arbitrary instruction that's different + * in REV2 and other revisions. + * NB: If a Host port does not require simultaneous support + * for multiple revisions of Target ROM, this code can be elided. + */ + (void)ar6000_ReadDataDiag(hifDevice, 0x01000040, + (A_UCHAR *)&instruction, 4); + + AR_DEBUG_PRINTF(ATH_LOG_ERR, ("instruction=0x%x\n", instruction)); + + if (instruction == 0x3c1aa200) { + /* It's an old ROM */ + ForceROM = ForceROM_REV2; + szForceROM = sizeof(ForceROM_REV2)/sizeof(*ForceROM); + AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Using OLD method\n")); + } else { + ForceROM = ForceROM_NEW; + szForceROM = sizeof(ForceROM_NEW)/sizeof(*ForceROM); + AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Using NEW method\n")); + } + + AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Force Target to execute from ROM....\n")); + for (i = 0; i < szForceROM; i++) + { + if (ar6000_WriteRegDiag(hifDevice, + &ForceROM[i].addr, + &ForceROM[i].data) != A_OK) + { + AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Cannot force Target to execute ROM!\n")); + return A_ERROR; + } + } + + msleep(50); /* delay to allow dragon to come to BMI phase */ + return A_OK; +} + +/* reset device */ +A_STATUS ar6000_reset_device(HIF_DEVICE *hifDevice, A_UINT32 TargetType) +{ + +#if !defined(DWSIM) + A_STATUS status = A_OK; + A_UINT32 address; + A_UINT32 data; + + do { + + // address = RESET_CONTROL_ADDRESS; + data = RESET_CONTROL_COLD_RST_MASK; + + /* Hardcode the address of RESET_CONTROL_ADDRESS based on the target type */ + if (TargetType == TARGET_TYPE_AR6001) { + address = 0x0C000000; + } else { + if (TargetType == TARGET_TYPE_AR6002) { + address = 0x00004000; + } else { + A_ASSERT(0); + } + } + + status = ar6000_WriteRegDiag(hifDevice, &address, &data); + + if (A_FAILED(status)) { + break; + } + + /* + * Read back the RESET CAUSE register to ensure that the cold reset + * went through. + */ + msleep(2000); /* 2 second delay to allow things to settle down */ + + + // address = RESET_CAUSE_ADDRESS; + /* Hardcode the address of RESET_CAUSE_ADDRESS based on the target type */ + if (TargetType == TARGET_TYPE_AR6001) { + address = 0x0C0000CC; + } else { + if (TargetType == TARGET_TYPE_AR6002) { + address = 0x000040C0; + } else { + A_ASSERT(0); + } + } + + data = 0; + status = ar6000_ReadRegDiag(hifDevice, &address, &data); + + if (A_FAILED(status)) { + break; + } + + AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Reset Cause readback: 0x%X \n",data)); + data &= RESET_CAUSE_LAST_MASK; + if (data != 2) { + AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Unable to cold reset the target \n")); + } + + } while (FALSE); + + if (A_FAILED(status)) { + AR_DEBUG_PRINTF(ATH_LOG_ERR, ("Failed to reset target \n")); + } +#endif + return A_OK; +} + +#define REG_DUMP_COUNT_AR6001 38 /* WORDs, derived from AR6001_regdump.h */ +#define REG_DUMP_COUNT_AR6002 32 /* WORDs, derived from AR6002_regdump.h */ + + +#if REG_DUMP_COUNT_AR6001 <= REG_DUMP_COUNT_AR6002 +#define REGISTER_DUMP_LEN_MAX REG_DUMP_COUNT_AR6002 +#else +#define REGISTER_DUMP_LEN_MAX REG_DUMP_COUNT_AR6001 +#endif + +void ar6000_dump_target_assert_info(HIF_DEVICE *hifDevice, A_UINT32 TargetType) +{ + A_UINT32 address; + A_UINT32 regDumpArea = 0; + A_STATUS status; + A_UINT32 regDumpValues[REGISTER_DUMP_LEN_MAX]; + A_UINT32 regDumpCount = 0; + A_UINT32 i; + + do { + + /* the reg dump pointer is copied to the host interest area */ + address = HOST_INTEREST_ITEM_ADDRESS(TargetType, hi_failure_state); + + if (TargetType == TARGET_TYPE_AR6001) { + /* for AR6001, this is a fixed location because the ptr is actually stuck in cache, + * this may be fixed in later firmware versions */ + address = 0x18a0; + regDumpCount = REG_DUMP_COUNT_AR6001; + + } else if (TargetType == TARGET_TYPE_AR6002) { + + regDumpCount = REG_DUMP_COUNT_AR6002; + + } else { + A_ASSERT(0); + } + + /* read RAM location through diagnostic window */ + status = ar6000_ReadRegDiag(hifDevice, &address, ®DumpArea); + + if (A_FAILED(status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Failed to get ptr to register dump area \n")); + break; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Location of register dump data: 0x%X \n",regDumpArea)); + + if (regDumpArea == 0) { + /* no reg dump */ + break; + } + + if (TargetType == TARGET_TYPE_AR6001) { + regDumpArea &= 0x0FFFFFFF; /* convert to physical address in target memory */ + } + + /* fetch register dump data */ + status = ar6000_ReadDataDiag(hifDevice, + regDumpArea, + (A_UCHAR *)®DumpValues[0], + regDumpCount * (sizeof(A_UINT32))); + + if (A_FAILED(status)) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Failed to get register dump \n")); + break; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("AR6K: Register Dump: \n")); + + for (i = 0; i < regDumpCount; i++) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" %d : 0x%8.8X \n",i, regDumpValues[i])); + } + + } while (FALSE); + +} + diff --git a/drivers/ar6000/miscdrv/credit_dist.c b/drivers/ar6000/miscdrv/credit_dist.c new file mode 100644 index 00000000000..8d37d627203 --- /dev/null +++ b/drivers/ar6000/miscdrv/credit_dist.c @@ -0,0 +1,346 @@ + +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include "a_config.h" +#include "athdefs.h" +#include "a_types.h" +#include "a_osapi.h" +#include "a_debug.h" +#include "htc_api.h" +#include "common_drv.h" + +/********* CREDIT DISTRIBUTION FUNCTIONS ******************************************/ + +#define NO_VO_SERVICE 1 /* currently WMI only uses 3 data streams, so we leave VO service inactive */ + +#ifdef NO_VO_SERVICE +#define DATA_SVCS_USED 3 +#else +#define DATA_SVCS_USED 4 +#endif + +static void RedistributeCredits(COMMON_CREDIT_STATE_INFO *pCredInfo, + HTC_ENDPOINT_CREDIT_DIST *pEPDistList); + +static void SeekCredits(COMMON_CREDIT_STATE_INFO *pCredInfo, + HTC_ENDPOINT_CREDIT_DIST *pEPDistList); + +/* reduce an ep's credits back to a set limit */ +static INLINE void ReduceCredits(COMMON_CREDIT_STATE_INFO *pCredInfo, + HTC_ENDPOINT_CREDIT_DIST *pEpDist, + int Limit) +{ + int credits; + + /* set the new limit */ + pEpDist->TxCreditsAssigned = Limit; + + if (pEpDist->TxCredits <= Limit) { + return; + } + + /* figure out how much to take away */ + credits = pEpDist->TxCredits - Limit; + /* take them away */ + pEpDist->TxCredits -= credits; + pCredInfo->CurrentFreeCredits += credits; +} + +/* give an endpoint some credits from the free credit pool */ +#define GiveCredits(pCredInfo,pEpDist,credits) \ +{ \ + (pEpDist)->TxCredits += (credits); \ + (pEpDist)->TxCreditsAssigned += (credits); \ + (pCredInfo)->CurrentFreeCredits -= (credits); \ +} + + +/* default credit init callback. + * This function is called in the context of HTCStart() to setup initial (application-specific) + * credit distributions */ +static void ar6000_credit_init(void *Context, + HTC_ENDPOINT_CREDIT_DIST *pEPList, + int TotalCredits) +{ + HTC_ENDPOINT_CREDIT_DIST *pCurEpDist; + int count; + COMMON_CREDIT_STATE_INFO *pCredInfo = (COMMON_CREDIT_STATE_INFO *)Context; + + pCredInfo->CurrentFreeCredits = TotalCredits; + pCredInfo->TotalAvailableCredits = TotalCredits; + + pCurEpDist = pEPList; + + /* run through the list and initialize */ + while (pCurEpDist != NULL) { + + /* set minimums for each endpoint */ + pCurEpDist->TxCreditsMin = pCurEpDist->TxCreditsPerMaxMsg; + + if (pCurEpDist->ServiceID == WMI_CONTROL_SVC) { + /* give control service some credits */ + GiveCredits(pCredInfo,pCurEpDist,pCurEpDist->TxCreditsMin); + /* control service is always marked active, it never goes inactive EVER */ + SET_EP_ACTIVE(pCurEpDist); + } else if (pCurEpDist->ServiceID == WMI_DATA_BK_SVC) { + /* this is the lowest priority data endpoint, save this off for easy access */ + pCredInfo->pLowestPriEpDist = pCurEpDist; + } + + /* Streams have to be created (explicit | implicit)for all kinds + * of traffic. BE endpoints are also inactive in the beginning. + * When BE traffic starts it creates implicit streams that + * redistributes credits. + */ + + /* note, all other endpoints have minimums set but are initially given NO credits. + * Credits will be distributed as traffic activity demands */ + pCurEpDist = pCurEpDist->pNext; + } + + if (pCredInfo->CurrentFreeCredits <= 0) { + AR_DEBUG_PRINTF(ATH_LOG_INF, ("Not enough credits (%d) to do credit distributions \n", TotalCredits)); + A_ASSERT(FALSE); + return; + } + + /* reset list */ + pCurEpDist = pEPList; + /* now run through the list and set max operating credit limits for everyone */ + while (pCurEpDist != NULL) { + if (pCurEpDist->ServiceID == WMI_CONTROL_SVC) { + /* control service max is just 1 max message */ + pCurEpDist->TxCreditsNorm = pCurEpDist->TxCreditsPerMaxMsg; + } else { + /* for the remaining data endpoints, we assume that each TxCreditsPerMaxMsg are + * the same. + * We use a simple calculation here, we take the remaining credits and + * determine how many max messages this can cover and then set each endpoint's + * normal value equal to half this amount. + * */ + count = (pCredInfo->CurrentFreeCredits/pCurEpDist->TxCreditsPerMaxMsg) * pCurEpDist->TxCreditsPerMaxMsg; + count = count >> 1; + count = max(count,pCurEpDist->TxCreditsPerMaxMsg); + /* set normal */ + pCurEpDist->TxCreditsNorm = count; + + } + pCurEpDist = pCurEpDist->pNext; + } + +} + + +/* default credit distribution callback + * This callback is invoked whenever endpoints require credit distributions. + * A lock is held while this function is invoked, this function shall NOT block. + * The pEPDistList is a list of distribution structures in prioritized order as + * defined by the call to the HTCSetCreditDistribution() api. + * + */ +static void ar6000_credit_distribute(void *Context, + HTC_ENDPOINT_CREDIT_DIST *pEPDistList, + HTC_CREDIT_DIST_REASON Reason) +{ + HTC_ENDPOINT_CREDIT_DIST *pCurEpDist; + COMMON_CREDIT_STATE_INFO *pCredInfo = (COMMON_CREDIT_STATE_INFO *)Context; + + switch (Reason) { + case HTC_CREDIT_DIST_SEND_COMPLETE : + pCurEpDist = pEPDistList; + /* we are given the start of the endpoint distribution list. + * There may be one or more endpoints to service. + * Run through the list and distribute credits */ + while (pCurEpDist != NULL) { + + if (pCurEpDist->TxCreditsToDist > 0) { + /* return the credits back to the endpoint */ + pCurEpDist->TxCredits += pCurEpDist->TxCreditsToDist; + /* always zero out when we are done */ + pCurEpDist->TxCreditsToDist = 0; + + if (pCurEpDist->TxCredits > pCurEpDist->TxCreditsAssigned) { + /* reduce to the assigned limit, previous credit reductions + * could have caused the limit to change */ + ReduceCredits(pCredInfo, pCurEpDist, pCurEpDist->TxCreditsAssigned); + } + + if (pCurEpDist->TxCredits > pCurEpDist->TxCreditsNorm) { + /* oversubscribed endpoints need to reduce back to normal */ + ReduceCredits(pCredInfo, pCurEpDist, pCurEpDist->TxCreditsNorm); + } + } + + pCurEpDist = pCurEpDist->pNext; + } + + A_ASSERT(pCredInfo->CurrentFreeCredits <= pCredInfo->TotalAvailableCredits); + + break; + + case HTC_CREDIT_DIST_ACTIVITY_CHANGE : + RedistributeCredits(pCredInfo,pEPDistList); + break; + case HTC_CREDIT_DIST_SEEK_CREDITS : + SeekCredits(pCredInfo,pEPDistList); + break; + case HTC_DUMP_CREDIT_STATE : + AR_DEBUG_PRINTF(ATH_LOG_INF, ("Credit Distribution, total : %d, free : %d\n", + pCredInfo->TotalAvailableCredits, pCredInfo->CurrentFreeCredits)); + break; + default: + break; + + } + +} + +/* redistribute credits based on activity change */ +static void RedistributeCredits(COMMON_CREDIT_STATE_INFO *pCredInfo, + HTC_ENDPOINT_CREDIT_DIST *pEPDistList) +{ + HTC_ENDPOINT_CREDIT_DIST *pCurEpDist = pEPDistList; + + /* walk through the list and remove credits from inactive endpoints */ + while (pCurEpDist != NULL) { + + if (pCurEpDist->ServiceID != WMI_CONTROL_SVC) { + if (!IS_EP_ACTIVE(pCurEpDist)) { + /* EP is inactive, reduce credits back to zero */ + ReduceCredits(pCredInfo, pCurEpDist, 0); + } + } + + /* NOTE in the active case, we do not need to do anything further, + * when an EP goes active and needs credits, HTC will call into + * our distribution function using a reason code of HTC_CREDIT_DIST_SEEK_CREDITS */ + + pCurEpDist = pCurEpDist->pNext; + } + + A_ASSERT(pCredInfo->CurrentFreeCredits <= pCredInfo->TotalAvailableCredits); + +} + +/* HTC has an endpoint that needs credits, pEPDist is the endpoint in question */ +static void SeekCredits(COMMON_CREDIT_STATE_INFO *pCredInfo, + HTC_ENDPOINT_CREDIT_DIST *pEPDist) +{ + HTC_ENDPOINT_CREDIT_DIST *pCurEpDist; + int credits = 0; + int need; + + do { + + if (pEPDist->ServiceID == WMI_CONTROL_SVC) { + /* we never oversubscribe on the control service, this is not + * a high performance path and the target never holds onto control + * credits for too long */ + break; + } + + /* for all other services, we follow a simple algorithm of + * 1. checking the free pool for credits + * 2. checking lower priority endpoints for credits to take */ + + if (pCredInfo->CurrentFreeCredits >= 2 * pEPDist->TxCreditsSeek) { + /* try to give more credits than it needs */ + credits = 2 * pEPDist->TxCreditsSeek; + } else { + /* give what we can */ + credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek); + } + + if (credits >= pEPDist->TxCreditsSeek) { + /* we found some to fullfill the seek request */ + break; + } + + /* we don't have enough in the free pool, try taking away from lower priority services + * + * The rule for taking away credits: + * 1. Only take from lower priority endpoints + * 2. Only take what is allocated above the minimum (never starve an endpoint completely) + * 3. Only take what you need. + * + * */ + + /* starting at the lowest priority */ + pCurEpDist = pCredInfo->pLowestPriEpDist; + + /* work backwards until we hit the endpoint again */ + while (pCurEpDist != pEPDist) { + /* calculate how many we need so far */ + need = pEPDist->TxCreditsSeek - pCredInfo->CurrentFreeCredits; + + if ((pCurEpDist->TxCreditsAssigned - need) > pCurEpDist->TxCreditsMin) { + /* the current one has been allocated more than it's minimum and it + * has enough credits assigned above it's minimum to fullfill our need + * try to take away just enough to fullfill our need */ + ReduceCredits(pCredInfo, + pCurEpDist, + pCurEpDist->TxCreditsAssigned - need); + + if (pCredInfo->CurrentFreeCredits >= pEPDist->TxCreditsSeek) { + /* we have enough */ + break; + } + } + + pCurEpDist = pCurEpDist->pPrev; + } + + /* return what we can get */ + credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek); + + } while (FALSE); + + /* did we find some credits? */ + if (credits) { + /* give what we can */ + GiveCredits(pCredInfo, pEPDist, credits); + } + +} + +/* initialize and setup credit distribution */ +A_STATUS ar6000_setup_credit_dist(HTC_HANDLE HTCHandle, COMMON_CREDIT_STATE_INFO *pCredInfo) +{ + HTC_SERVICE_ID servicepriority[5]; + + A_MEMZERO(pCredInfo,sizeof(COMMON_CREDIT_STATE_INFO)); + + servicepriority[0] = WMI_CONTROL_SVC; /* highest */ + servicepriority[1] = WMI_DATA_VO_SVC; + servicepriority[2] = WMI_DATA_VI_SVC; + servicepriority[3] = WMI_DATA_BE_SVC; + servicepriority[4] = WMI_DATA_BK_SVC; /* lowest */ + + /* set callbacks and priority list */ + HTCSetCreditDistribution(HTCHandle, + pCredInfo, + ar6000_credit_distribute, + ar6000_credit_init, + servicepriority, + 5); + + return A_OK; +} + diff --git a/drivers/ar6000/wlan/wlan_node.c b/drivers/ar6000/wlan/wlan_node.c new file mode 100644 index 00000000000..b12484597f8 --- /dev/null +++ b/drivers/ar6000/wlan/wlan_node.c @@ -0,0 +1,371 @@ +/*- + * Copyright (c) 2001 Atsushi Onoe + * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting + * Copyright (c) 2004-2005 Atheros Communications + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * $Id: //depot/sw/releases/olca2.0-GPL/host/wlan/src/wlan_node.c#1 $ + */ +/* + * IEEE 802.11 node handling support. + */ +#include <a_config.h> +#include <athdefs.h> +#include <a_types.h> +#include <a_osapi.h> +#include <a_debug.h> +#include <ieee80211.h> +#include <wlan_api.h> +#include <ieee80211_node.h> +#include <htc_api.h> +#include <wmi.h> +#include <wmi_api.h> + +static void wlan_node_timeout(A_ATH_TIMER arg); +static bss_t * _ieee80211_find_node(struct ieee80211_node_table *nt, + const A_UINT8 *macaddr); + +bss_t * +wlan_node_alloc(struct ieee80211_node_table *nt, int wh_size) +{ + bss_t *ni; + + ni = A_MALLOC_NOWAIT(sizeof(bss_t)); + + if (ni != NULL) { + ni->ni_buf = A_MALLOC_NOWAIT(wh_size); + if (ni->ni_buf == NULL) { + A_FREE(ni); + ni = NULL; + return ni; + } + } else { + return ni; + } + + /* Make sure our lists are clean */ + ni->ni_list_next = NULL; + ni->ni_list_prev = NULL; + ni->ni_hash_next = NULL; + ni->ni_hash_prev = NULL; + + // + // ni_scangen never initialized before and during suspend/resume of winmobile, customer (LG/SEMCO) identified + // that some junk has been stored in this, due to this scan list didn't properly updated + // + ni->ni_scangen = 0; + + return ni; +} + +void +wlan_node_free(bss_t *ni) +{ + if (ni->ni_buf != NULL) { + A_FREE(ni->ni_buf); + } + A_FREE(ni); +} + +void +wlan_setup_node(struct ieee80211_node_table *nt, bss_t *ni, + const A_UINT8 *macaddr) +{ + int hash; + + A_MEMCPY(ni->ni_macaddr, macaddr, IEEE80211_ADDR_LEN); + hash = IEEE80211_NODE_HASH(macaddr); + ieee80211_node_initref(ni); /* mark referenced */ + + ni->ni_tstamp = A_GET_MS(WLAN_NODE_INACT_TIMEOUT_MSEC); + IEEE80211_NODE_LOCK_BH(nt); + + /* Insert at the end of the node list */ + ni->ni_list_next = NULL; + ni->ni_list_prev = nt->nt_node_last; + if(nt->nt_node_last != NULL) + { + nt->nt_node_last->ni_list_next = ni; + } + nt->nt_node_last = ni; + if(nt->nt_node_first == NULL) + { + nt->nt_node_first = ni; + } + + /* Insert into the hash list i.e. the bucket */ + if((ni->ni_hash_next = nt->nt_hash[hash]) != NULL) + { + nt->nt_hash[hash]->ni_hash_prev = ni; + } + ni->ni_hash_prev = NULL; + nt->nt_hash[hash] = ni; + + if (!nt->isTimerArmed) { + A_TIMEOUT_MS(&nt->nt_inact_timer, WLAN_NODE_INACT_TIMEOUT_MSEC, 0); + nt->isTimerArmed = TRUE; + } + + IEEE80211_NODE_UNLOCK_BH(nt); +} + +static bss_t * +_ieee80211_find_node(struct ieee80211_node_table *nt, + const A_UINT8 *macaddr) +{ + bss_t *ni; + int hash; + + IEEE80211_NODE_LOCK_ASSERT(nt); + + hash = IEEE80211_NODE_HASH(macaddr); + for(ni = nt->nt_hash[hash]; ni; ni = ni->ni_hash_next) { + if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) { + ieee80211_node_incref(ni); /* mark referenced */ + return ni; + } + } + return NULL; +} + +bss_t * +wlan_find_node(struct ieee80211_node_table *nt, const A_UINT8 *macaddr) +{ + bss_t *ni; + + IEEE80211_NODE_LOCK(nt); + ni = _ieee80211_find_node(nt, macaddr); + IEEE80211_NODE_UNLOCK(nt); + return ni; +} + +/* + * Reclaim a node. If this is the last reference count then + * do the normal free work. Otherwise remove it from the node + * table and mark it gone by clearing the back-reference. + */ +void +wlan_node_reclaim(struct ieee80211_node_table *nt, bss_t *ni) +{ + IEEE80211_NODE_LOCK(nt); + + if(ni->ni_list_prev == NULL) + { + /* First in list so fix the list head */ + nt->nt_node_first = ni->ni_list_next; + } + else + { + ni->ni_list_prev->ni_list_next = ni->ni_list_next; + } + + if(ni->ni_list_next == NULL) + { + /* Last in list so fix list tail */ + nt->nt_node_last = ni->ni_list_prev; + } + else + { + ni->ni_list_next->ni_list_prev = ni->ni_list_prev; + } + + if(ni->ni_hash_prev == NULL) + { + /* First in list so fix the list head */ + int hash; + hash = IEEE80211_NODE_HASH(ni->ni_macaddr); + nt->nt_hash[hash] = ni->ni_hash_next; + } + else + { + ni->ni_hash_prev->ni_hash_next = ni->ni_hash_next; + } + + if(ni->ni_hash_next != NULL) + { + ni->ni_hash_next->ni_hash_prev = ni->ni_hash_prev; + } + wlan_node_free(ni); + + IEEE80211_NODE_UNLOCK(nt); +} + +static void +wlan_node_dec_free(bss_t *ni) +{ + if (ieee80211_node_dectestref(ni)) { + wlan_node_free(ni); + } +} + +void +wlan_free_allnodes(struct ieee80211_node_table *nt) +{ + bss_t *ni; + + while ((ni = nt->nt_node_first) != NULL) { + wlan_node_reclaim(nt, ni); + } +} + +void +wlan_iterate_nodes(struct ieee80211_node_table *nt, wlan_node_iter_func *f, + void *arg) +{ + bss_t *ni; + A_UINT32 gen; + + gen = ++nt->nt_scangen; + + IEEE80211_NODE_LOCK(nt); + for (ni = nt->nt_node_first; ni; ni = ni->ni_list_next) { + if (ni->ni_scangen != gen) { + ni->ni_scangen = gen; + (void) ieee80211_node_incref(ni); + (*f)(arg, ni); + wlan_node_dec_free(ni); + } + } + IEEE80211_NODE_UNLOCK(nt); +} + +/* + * Node table support. + */ +void +wlan_node_table_init(void *wmip, struct ieee80211_node_table *nt) +{ + int i; + + AR_DEBUG_PRINTF(ATH_DEBUG_WLAN, ("node table = 0x%x\n", (A_UINT32)nt)); + IEEE80211_NODE_LOCK_INIT(nt); + + nt->nt_node_first = nt->nt_node_last = NULL; + for(i = 0; i < IEEE80211_NODE_HASHSIZE; i++) + { + nt->nt_hash[i] = NULL; + } + A_INIT_TIMER(&nt->nt_inact_timer, wlan_node_timeout, nt); + nt->isTimerArmed = FALSE; + nt->nt_wmip = wmip; +} + +static void +wlan_node_timeout(A_ATH_TIMER arg) +{ + struct ieee80211_node_table *nt = (struct ieee80211_node_table *)arg; + bss_t *bss, *nextBss; + A_UINT8 myBssid[IEEE80211_ADDR_LEN], reArmTimer = FALSE; + + wmi_get_current_bssid(nt->nt_wmip, myBssid); + + bss = nt->nt_node_first; + while (bss != NULL) + { + nextBss = bss->ni_list_next; + if (A_MEMCMP(myBssid, bss->ni_macaddr, sizeof(myBssid)) != 0) + { + + if (bss->ni_tstamp <= A_GET_MS(0)) + { + /* + * free up all but the current bss - if set + */ + wlan_node_reclaim(nt, bss); + } + else + { + /* + * Re-arm timer, only when we have a bss other than + * current bss AND it is not aged-out. + */ + reArmTimer = TRUE; + } + } + bss = nextBss; + } + + if(reArmTimer) + A_TIMEOUT_MS(&nt->nt_inact_timer, WLAN_NODE_INACT_TIMEOUT_MSEC, 0); + + nt->isTimerArmed = reArmTimer; +} + +void +wlan_node_table_cleanup(struct ieee80211_node_table *nt) +{ + A_UNTIMEOUT(&nt->nt_inact_timer); + A_DELETE_TIMER(&nt->nt_inact_timer); + wlan_free_allnodes(nt); + IEEE80211_NODE_LOCK_DESTROY(nt); +} + +bss_t * +wlan_find_Ssidnode (struct ieee80211_node_table *nt, A_UCHAR *pSsid, + A_UINT32 ssidLength, A_BOOL bIsWPA2) +{ + bss_t *ni = NULL; + A_UCHAR *pIESsid = NULL; + + IEEE80211_NODE_LOCK (nt); + + for (ni = nt->nt_node_first; ni; ni = ni->ni_list_next) { + pIESsid = ni->ni_cie.ie_ssid; + if (pIESsid[1] <= 32) { + + // Step 1 : Check SSID + if (0x00 == memcmp (pSsid, &pIESsid[2], ssidLength)) { + + // Step 2 : if SSID matches, check WPA or WPA2 + if (TRUE == bIsWPA2 && NULL != ni->ni_cie.ie_rsn) { + ieee80211_node_incref (ni); /* mark referenced */ + IEEE80211_NODE_UNLOCK (nt); + return ni; + } + if (FALSE == bIsWPA2 && NULL != ni->ni_cie.ie_wpa) { + ieee80211_node_incref(ni); /* mark referenced */ + IEEE80211_NODE_UNLOCK (nt); + return ni; + } + } + } + } + + IEEE80211_NODE_UNLOCK (nt); + + return NULL; +} + +void +wlan_node_return (struct ieee80211_node_table *nt, bss_t *ni) +{ + IEEE80211_NODE_LOCK (nt); + wlan_node_dec_free (ni); + IEEE80211_NODE_UNLOCK (nt); +} diff --git a/drivers/ar6000/wlan/wlan_recv_beacon.c b/drivers/ar6000/wlan/wlan_recv_beacon.c new file mode 100644 index 00000000000..15beabb6549 --- /dev/null +++ b/drivers/ar6000/wlan/wlan_recv_beacon.c @@ -0,0 +1,192 @@ +/*- + * Copyright (c) 2001 Atsushi Onoe + * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +/* + * IEEE 802.11 input handling. + */ + +#include "a_config.h" +#include "athdefs.h" +#include "a_types.h" +#include "a_osapi.h" +#include <wmi.h> +#include <ieee80211.h> +#include <wlan_api.h> + +#define IEEE80211_VERIFY_LENGTH(_len, _minlen) do { \ + if ((_len) < (_minlen)) { \ + return A_EINVAL; \ + } \ +} while (0) + +#define IEEE80211_VERIFY_ELEMENT(__elem, __maxlen) do { \ + if ((__elem) == NULL) { \ + return A_EINVAL; \ + } \ + if ((__elem)[1] > (__maxlen)) { \ + return A_EINVAL; \ + } \ +} while (0) + + +/* unaligned little endian access */ +#define LE_READ_2(p) \ + ((A_UINT16) \ + ((((A_UINT8 *)(p))[0] ) | (((A_UINT8 *)(p))[1] << 8))) + +#define LE_READ_4(p) \ + ((A_UINT32) \ + ((((A_UINT8 *)(p))[0] ) | (((A_UINT8 *)(p))[1] << 8) | \ + (((A_UINT8 *)(p))[2] << 16) | (((A_UINT8 *)(p))[3] << 24))) + + +static int __inline +iswpaoui(const A_UINT8 *frm) +{ + return frm[1] > 3 && LE_READ_4(frm+2) == ((WPA_OUI_TYPE<<24)|WPA_OUI); +} + +static int __inline +iswmmoui(const A_UINT8 *frm) +{ + return frm[1] > 3 && LE_READ_4(frm+2) == ((WMM_OUI_TYPE<<24)|WMM_OUI); +} + +static int __inline +iswmmparam(const A_UINT8 *frm) +{ + return frm[1] > 5 && frm[6] == WMM_PARAM_OUI_SUBTYPE; +} + +static int __inline +iswmminfo(const A_UINT8 *frm) +{ + return frm[1] > 5 && frm[6] == WMM_INFO_OUI_SUBTYPE; +} + +static int __inline +isatherosoui(const A_UINT8 *frm) +{ + return frm[1] > 3 && LE_READ_4(frm+2) == ((ATH_OUI_TYPE<<24)|ATH_OUI); +} + +static int __inline +iswscoui(const A_UINT8 *frm) +{ + return frm[1] > 3 && LE_READ_4(frm+2) == ((0x04<<24)|WPA_OUI); +} + +A_STATUS +wlan_parse_beacon(A_UINT8 *buf, int framelen, struct ieee80211_common_ie *cie) +{ + A_UINT8 *frm, *efrm; + + frm = buf; + efrm = (A_UINT8 *) (frm + framelen); + + /* + * beacon/probe response frame format + * [8] time stamp + * [2] beacon interval + * [2] capability information + * [tlv] ssid + * [tlv] supported rates + * [tlv] country information + * [tlv] parameter set (FH/DS) + * [tlv] erp information + * [tlv] extended supported rates + * [tlv] WMM + * [tlv] WPA or RSN + * [tlv] Atheros Advanced Capabilities + */ + IEEE80211_VERIFY_LENGTH(efrm - frm, 12); + A_MEMZERO(cie, sizeof(*cie)); + + cie->ie_tstamp = frm; frm += 8; + cie->ie_beaconInt = A_LE2CPU16(*(A_UINT16 *)frm); frm += 2; + cie->ie_capInfo = A_LE2CPU16(*(A_UINT16 *)frm); frm += 2; + cie->ie_chan = 0; + + while (frm < efrm) { + switch (*frm) { + case IEEE80211_ELEMID_SSID: + cie->ie_ssid = frm; + break; + case IEEE80211_ELEMID_RATES: + cie->ie_rates = frm; + break; + case IEEE80211_ELEMID_COUNTRY: + cie->ie_country = frm; + break; + case IEEE80211_ELEMID_FHPARMS: + break; + case IEEE80211_ELEMID_DSPARMS: + cie->ie_chan = frm[2]; + break; + case IEEE80211_ELEMID_TIM: + cie->ie_tim = frm; + break; + case IEEE80211_ELEMID_IBSSPARMS: + break; + case IEEE80211_ELEMID_XRATES: + cie->ie_xrates = frm; + break; + case IEEE80211_ELEMID_ERP: + if (frm[1] != 1) { + //A_PRINTF("Discarding ERP Element - Bad Len\n"); + return A_EINVAL; + } + cie->ie_erp = frm[2]; + break; + case IEEE80211_ELEMID_RSN: + cie->ie_rsn = frm; + break; + case IEEE80211_ELEMID_VENDOR: + if (iswpaoui(frm)) { + cie->ie_wpa = frm; + } else if (iswmmoui(frm)) { + cie->ie_wmm = frm; + } else if (isatherosoui(frm)) { + cie->ie_ath = frm; + } else if(iswscoui(frm)) { + cie->ie_wsc = frm; + } + break; + default: + break; + } + frm += frm[1] + 2; + } + IEEE80211_VERIFY_ELEMENT(cie->ie_rates, IEEE80211_RATE_MAXSIZE); + IEEE80211_VERIFY_ELEMENT(cie->ie_ssid, IEEE80211_NWID_LEN); + + return A_OK; +} diff --git a/drivers/ar6000/wlan/wlan_utils.c b/drivers/ar6000/wlan/wlan_utils.c new file mode 100644 index 00000000000..fd5aac90e61 --- /dev/null +++ b/drivers/ar6000/wlan/wlan_utils.c @@ -0,0 +1,59 @@ +/* + * Copyright (c) 2004-2005 Atheros Communications Inc. + * All rights reserved. + * + * This module implements frequently used wlan utilies + * + * $Id: //depot/sw/releases/olca2.0-GPL/host/wlan/src/wlan_utils.c#1 $ + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include <a_config.h> +#include <athdefs.h> +#include <a_types.h> +#include <a_osapi.h> + +/* + * converts ieee channel number to frequency + */ +A_UINT16 +wlan_ieee2freq(int chan) +{ + if (chan == 14) { + return 2484; + } + if (chan < 14) { /* 0-13 */ + return (2407 + (chan*5)); + } + if (chan < 27) { /* 15-26 */ + return (2512 + ((chan-15)*20)); + } + return (5000 + (chan*5)); +} + +/* + * Converts MHz frequency to IEEE channel number. + */ +A_UINT32 +wlan_freq2ieee(A_UINT16 freq) +{ + if (freq == 2484) + return 14; + if (freq < 2484) + return (freq - 2407) / 5; + if (freq < 5000) + return 15 + ((freq - 2512) / 20); + return (freq - 5000) / 5; +} diff --git a/drivers/ar6000/wmi/wmi.c b/drivers/ar6000/wmi/wmi.c new file mode 100644 index 00000000000..d322cf3f522 --- /dev/null +++ b/drivers/ar6000/wmi/wmi.c @@ -0,0 +1,3954 @@ +/* + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * This module implements the hardware independent layer of the + * Wireless Module Interface (WMI) protocol. + * + * $Id: //depot/sw/releases/olca2.0-GPL/host/wmi/wmi.c#3 $ + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#include <a_config.h> +#include <athdefs.h> +#include <a_types.h> +#include <a_osapi.h> +#include "htc.h" +#include "htc_api.h" +#include "wmi.h" +#include <ieee80211.h> +#include <ieee80211_node.h> +#include <wlan_api.h> +#include <wmi_api.h> +#include "dset_api.h" +#include "gpio_api.h" +#include "wmi_host.h" +#include "a_drv.h" +#include "a_drv_api.h" +#include "a_debug.h" +#include "dbglog_api.h" + +static A_STATUS wmi_ready_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); + +static A_STATUS wmi_connect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +static A_STATUS wmi_disconnect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +static A_STATUS wmi_tkip_micerr_event_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +static A_STATUS wmi_bssInfo_event_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +static A_STATUS wmi_opt_frame_event_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +static A_STATUS wmi_pstream_timeout_event_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +static A_STATUS wmi_sync_point(struct wmi_t *wmip); + +static A_STATUS wmi_bitrate_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +static A_STATUS wmi_ratemask_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +static A_STATUS wmi_channelList_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +static A_STATUS wmi_regDomain_event_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +static A_STATUS wmi_txPwr_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); +static A_STATUS wmi_neighborReport_event_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); + +static A_STATUS wmi_dset_open_req_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +#ifdef CONFIG_HOST_DSET_SUPPORT +static A_STATUS wmi_dset_close_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); +static A_STATUS wmi_dset_data_req_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +#endif /* CONFIG_HOST_DSET_SUPPORT */ + + +static A_STATUS wmi_scanComplete_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +static A_STATUS wmi_errorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); +static A_STATUS wmi_statsEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); +static A_STATUS wmi_rssiThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); +static A_STATUS wmi_hbChallengeResp_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); +static A_STATUS wmi_reportErrorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); +static A_STATUS wmi_cac_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); +static A_STATUS wmi_roam_tbl_event_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +static A_STATUS wmi_roam_data_event_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +static A_STATUS wmi_get_wow_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, + int len); +static A_STATUS +wmi_get_pmkid_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, A_UINT32 len); + +#ifdef CONFIG_HOST_GPIO_SUPPORT +static A_STATUS wmi_gpio_intr_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); +static A_STATUS wmi_gpio_data_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); +static A_STATUS wmi_gpio_ack_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); +#endif /* CONFIG_HOST_GPIO_SUPPORT */ + +#ifdef CONFIG_HOST_TCMD_SUPPORT +static A_STATUS +wmi_tcmd_test_report_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); +#endif + +static A_STATUS +wmi_txRetryErrEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); + +static A_STATUS +wmi_snrThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); + +static A_STATUS +wmi_lqThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); + +static A_BOOL +wmi_is_bitrate_index_valid(struct wmi_t *wmip, A_UINT32 rateIndex); + +static A_STATUS +wmi_aplistEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); + +static A_STATUS +wmi_dbglog_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); + +static A_STATUS wmi_keepalive_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len); + +int wps_enable; +static const A_INT32 wmi_rateTable[] = { + 1000, + 2000, + 5500, + 11000, + 6000, + 9000, + 12000, + 18000, + 24000, + 36000, + 48000, + 54000, + 0}; + +#define MODE_A_SUPPORT_RATE_START 4 +#define MODE_A_SUPPORT_RATE_STOP 11 + +#define MODE_GONLY_SUPPORT_RATE_START MODE_A_SUPPORT_RATE_START +#define MODE_GONLY_SUPPORT_RATE_STOP MODE_A_SUPPORT_RATE_STOP + +#define MODE_B_SUPPORT_RATE_START 0 +#define MODE_B_SUPPORT_RATE_STOP 3 + +#define MODE_G_SUPPORT_RATE_START 0 +#define MODE_G_SUPPORT_RATE_STOP 11 + +#define MAX_NUMBER_OF_SUPPORT_RATES (MODE_G_SUPPORT_RATE_STOP + 1) + +/* 802.1d to AC mapping. Refer pg 57 of WMM-test-plan-v1.2 */ +const A_UINT8 up_to_ac[]= { + WMM_AC_BE, + WMM_AC_BK, + WMM_AC_BK, + WMM_AC_BE, + WMM_AC_VI, + WMM_AC_VI, + WMM_AC_VO, + WMM_AC_VO, + }; + +void * +wmi_init(void *devt) +{ + struct wmi_t *wmip; + + wmip = A_MALLOC(sizeof(struct wmi_t)); + if (wmip == NULL) { + return (NULL); + } + A_MEMZERO(wmip, sizeof(*wmip)); + A_MUTEX_INIT(&wmip->wmi_lock); + wmip->wmi_devt = devt; + wlan_node_table_init(wmip, &wmip->wmi_scan_table); + wmi_qos_state_init(wmip); + wmip->wmi_powerMode = REC_POWER; + wmip->wmi_phyMode = WMI_11G_MODE; + + return (wmip); +} + +void +wmi_qos_state_init(struct wmi_t *wmip) +{ + A_UINT8 i; + + if (wmip == NULL) { + return; + } + LOCK_WMI(wmip); + + /* Initialize QoS States */ + wmip->wmi_numQoSStream = 0; + + wmip->wmi_fatPipeExists = 0; + + for (i=0; i < WMM_NUM_AC; i++) { + wmip->wmi_streamExistsForAC[i]=0; + } + + /* Initialize the static Wmi stream Pri to WMM AC mappings Arrays */ + WMI_INIT_WMISTREAM_AC_MAP(wmip); + + UNLOCK_WMI(wmip); + + A_WMI_SET_NUMDATAENDPTS(wmip->wmi_devt, 1); +} + +void +wmi_shutdown(struct wmi_t *wmip) +{ + if (wmip != NULL) { + wlan_node_table_cleanup(&wmip->wmi_scan_table); + if (A_IS_MUTEX_VALID(&wmip->wmi_lock)) { + A_MUTEX_DELETE(&wmip->wmi_lock); + } + A_FREE(wmip); + } +} + +/* + * performs DIX to 802.3 encapsulation for transmit packets. + * uses passed in buffer. Returns buffer or NULL if failed. + * Assumes the entire DIX header is contigous and that there is + * enough room in the buffer for a 802.3 mac header and LLC+SNAP headers. + */ +A_STATUS +wmi_dix_2_dot3(struct wmi_t *wmip, void *osbuf) +{ + A_UINT8 *datap; + A_UINT16 typeorlen; + ATH_MAC_HDR macHdr; + ATH_LLC_SNAP_HDR *llcHdr; + + A_ASSERT(osbuf != NULL); + + if (A_NETBUF_HEADROOM(osbuf) < + (sizeof(ATH_LLC_SNAP_HDR) + sizeof(WMI_DATA_HDR))) + { + return A_NO_MEMORY; + } + + datap = A_NETBUF_DATA(osbuf); + + typeorlen = *(A_UINT16 *)(datap + ATH_MAC_LEN + ATH_MAC_LEN); + + if (!IS_ETHERTYPE(A_BE2CPU16(typeorlen))) { + /* + * packet is already in 802.3 format - return success + */ + A_DPRINTF(DBG_WMI, (DBGFMT "packet already 802.3\n", DBGARG)); + return (A_OK); + } + + /* + * Save mac fields and length to be inserted later + */ + A_MEMCPY(macHdr.dstMac, datap, ATH_MAC_LEN); + A_MEMCPY(macHdr.srcMac, datap + ATH_MAC_LEN, ATH_MAC_LEN); + macHdr.typeOrLen = A_CPU2BE16(A_NETBUF_LEN(osbuf) - sizeof(ATH_MAC_HDR) + + sizeof(ATH_LLC_SNAP_HDR)); + + /* + * Make room for LLC+SNAP headers + */ + if (A_NETBUF_PUSH(osbuf, sizeof(ATH_LLC_SNAP_HDR)) != A_OK) { + return A_NO_MEMORY; + } + + datap = A_NETBUF_DATA(osbuf); + + A_MEMCPY(datap, &macHdr, sizeof (ATH_MAC_HDR)); + + llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(ATH_MAC_HDR)); + llcHdr->dsap = 0xAA; + llcHdr->ssap = 0xAA; + llcHdr->cntl = 0x03; + llcHdr->orgCode[0] = 0x0; + llcHdr->orgCode[1] = 0x0; + llcHdr->orgCode[2] = 0x0; + llcHdr->etherType = typeorlen; + + return (A_OK); +} + +/* + * Adds a WMI data header + * Assumes there is enough room in the buffer to add header. + */ +A_STATUS +wmi_data_hdr_add(struct wmi_t *wmip, void *osbuf, A_UINT8 msgType) +{ + WMI_DATA_HDR *dtHdr; + + A_ASSERT(osbuf != NULL); + + if (A_NETBUF_PUSH(osbuf, sizeof(WMI_DATA_HDR)) != A_OK) { + return A_NO_MEMORY; + } + + dtHdr = (WMI_DATA_HDR *)A_NETBUF_DATA(osbuf); + dtHdr->info = msgType; + dtHdr->rssi = 0; + + return (A_OK); +} + +A_UINT8 wmi_implicit_create_pstream(struct wmi_t *wmip, void *osbuf, A_UINT8 dir, A_UINT8 up) +{ + A_UINT8 *datap; + A_UINT8 trafficClass = WMM_AC_BE, userPriority = up; + ATH_LLC_SNAP_HDR *llcHdr; + A_UINT16 ipType = IP_ETHERTYPE; + WMI_DATA_HDR *dtHdr; + WMI_CREATE_PSTREAM_CMD cmd; + A_BOOL streamExists = FALSE; + + A_ASSERT(osbuf != NULL); + + datap = A_NETBUF_DATA(osbuf); + + if (up == UNDEFINED_PRI) { + llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(WMI_DATA_HDR) + + sizeof(ATH_MAC_HDR)); + + if (llcHdr->etherType == A_CPU2BE16(ipType)) { + /* Extract the endpoint info from the TOS field in the IP header */ + userPriority = A_WMI_IPTOS_TO_USERPRIORITY(((A_UINT8 *)llcHdr) + sizeof(ATH_LLC_SNAP_HDR)); + } + } + + if (userPriority < MAX_NUM_PRI) { + trafficClass = convert_userPriority_to_trafficClass(userPriority); + } + + dtHdr = (WMI_DATA_HDR *)datap; + if(dir==UPLINK_TRAFFIC) + dtHdr->info |= (userPriority & WMI_DATA_HDR_UP_MASK) << WMI_DATA_HDR_UP_SHIFT; /* lower 3-bits are 802.1d priority */ + + LOCK_WMI(wmip); + streamExists = wmip->wmi_fatPipeExists; + UNLOCK_WMI(wmip); + + if (!(streamExists & (1 << trafficClass))) { + + A_MEMZERO(&cmd, sizeof(cmd)); + cmd.trafficClass = trafficClass; + cmd.userPriority = userPriority; + cmd.inactivityInt = WMI_IMPLICIT_PSTREAM_INACTIVITY_INT; + /* Implicit streams are created with TSID 0xFF */ + cmd.tsid = WMI_IMPLICIT_PSTREAM; + wmi_create_pstream_cmd(wmip, &cmd); + } + + return trafficClass; +} + +WMI_PRI_STREAM_ID +wmi_get_stream_id(struct wmi_t *wmip, A_UINT8 trafficClass) +{ + return WMI_ACCESSCATEGORY_WMISTREAM(wmip, trafficClass); +} + +/* + * performs 802.3 to DIX encapsulation for received packets. + * Assumes the entire 802.3 header is contigous. + */ +A_STATUS +wmi_dot3_2_dix(struct wmi_t *wmip, void *osbuf) +{ + A_UINT8 *datap; + ATH_MAC_HDR macHdr; + ATH_LLC_SNAP_HDR *llcHdr; + + A_ASSERT(osbuf != NULL); + datap = A_NETBUF_DATA(osbuf); + + A_MEMCPY(&macHdr, datap, sizeof(ATH_MAC_HDR)); + llcHdr = (ATH_LLC_SNAP_HDR *)(datap + sizeof(ATH_MAC_HDR)); + macHdr.typeOrLen = llcHdr->etherType; + + if (A_NETBUF_PULL(osbuf, sizeof(ATH_LLC_SNAP_HDR)) != A_OK) { + return A_NO_MEMORY; + } + + datap = A_NETBUF_DATA(osbuf); + + A_MEMCPY(datap, &macHdr, sizeof (ATH_MAC_HDR)); + + return (A_OK); +} + +/* + * Removes a WMI data header + */ +A_STATUS +wmi_data_hdr_remove(struct wmi_t *wmip, void *osbuf) +{ + A_ASSERT(osbuf != NULL); + + return (A_NETBUF_PULL(osbuf, sizeof(WMI_DATA_HDR))); +} + +void +wmi_iterate_nodes(struct wmi_t *wmip, wlan_node_iter_func *f, void *arg) +{ + wlan_iterate_nodes(&wmip->wmi_scan_table, f, arg); +} + +/* + * WMI Extended Event received from Target. + */ +A_STATUS +wmi_control_rx_xtnd(struct wmi_t *wmip, void *osbuf) +{ + WMIX_CMD_HDR *cmd; + A_UINT16 id; + A_UINT8 *datap; + A_UINT32 len; + A_STATUS status = A_OK; + + if (A_NETBUF_LEN(osbuf) < sizeof(WMIX_CMD_HDR)) { + A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 1\n", DBGARG)); + wmip->wmi_stats.cmd_len_err++; + A_NETBUF_FREE(osbuf); + return A_ERROR; + } + + cmd = (WMIX_CMD_HDR *)A_NETBUF_DATA(osbuf); + id = cmd->commandId; + + if (A_NETBUF_PULL(osbuf, sizeof(WMIX_CMD_HDR)) != A_OK) { + A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 2\n", DBGARG)); + wmip->wmi_stats.cmd_len_err++; + A_NETBUF_FREE(osbuf); + return A_ERROR; + } + + datap = A_NETBUF_DATA(osbuf); + len = A_NETBUF_LEN(osbuf); + + switch (id) { + case (WMIX_DSETOPENREQ_EVENTID): + status = wmi_dset_open_req_rx(wmip, datap, len); + break; +#ifdef CONFIG_HOST_DSET_SUPPORT + case (WMIX_DSETCLOSE_EVENTID): + status = wmi_dset_close_rx(wmip, datap, len); + break; + case (WMIX_DSETDATAREQ_EVENTID): + status = wmi_dset_data_req_rx(wmip, datap, len); + break; +#endif /* CONFIG_HOST_DSET_SUPPORT */ +#ifdef CONFIG_HOST_GPIO_SUPPORT + case (WMIX_GPIO_INTR_EVENTID): + wmi_gpio_intr_rx(wmip, datap, len); + break; + case (WMIX_GPIO_DATA_EVENTID): + wmi_gpio_data_rx(wmip, datap, len); + break; + case (WMIX_GPIO_ACK_EVENTID): + wmi_gpio_ack_rx(wmip, datap, len); + break; +#endif /* CONFIG_HOST_GPIO_SUPPORT */ + case (WMIX_HB_CHALLENGE_RESP_EVENTID): + wmi_hbChallengeResp_rx(wmip, datap, len); + break; + case (WMIX_DBGLOG_EVENTID): + wmi_dbglog_event_rx(wmip, datap, len); + break; + default: + A_DPRINTF(DBG_WMI|DBG_ERROR, + (DBGFMT "Unknown id 0x%x\n", DBGARG, id)); + wmip->wmi_stats.cmd_id_err++; + status = A_ERROR; + break; + } + + return status; +} + +/* + * Control Path + */ +A_UINT32 cmdRecvNum; + +A_STATUS +wmi_control_rx(struct wmi_t *wmip, void *osbuf) +{ + WMI_CMD_HDR *cmd; + A_UINT16 id; + A_UINT8 *datap; + A_UINT32 len, i, loggingReq; + A_STATUS status = A_OK; + + A_ASSERT(osbuf != NULL); + if (A_NETBUF_LEN(osbuf) < sizeof(WMI_CMD_HDR)) { + A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 1\n", DBGARG)); + wmip->wmi_stats.cmd_len_err++; + A_NETBUF_FREE(osbuf); + return A_ERROR; + } + + cmd = (WMI_CMD_HDR *)A_NETBUF_DATA(osbuf); + id = cmd->commandId; + + if (A_NETBUF_PULL(osbuf, sizeof(WMI_CMD_HDR)) != A_OK) { + A_DPRINTF(DBG_WMI, (DBGFMT "bad packet 2\n", DBGARG)); + wmip->wmi_stats.cmd_len_err++; + A_NETBUF_FREE(osbuf); + return A_ERROR; + } + + datap = A_NETBUF_DATA(osbuf); + len = A_NETBUF_LEN(osbuf); + + ar6000_get_driver_cfg(wmip->wmi_devt, + AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS, + &loggingReq); + + if(loggingReq) { + AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("WMI %d \n",id)); + AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("WMI recv, MsgNo %d : ", cmdRecvNum)); + for(i = 0; i < len; i++) + AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("%x ", datap[i])); + AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("\n")); + } + + LOCK_WMI(wmip); + cmdRecvNum++; + UNLOCK_WMI(wmip); + + switch (id) { + case (WMI_GET_BITRATE_CMDID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_BITRATE_CMDID\n", DBGARG)); + status = wmi_bitrate_reply_rx(wmip, datap, len); + break; + case (WMI_GET_CHANNEL_LIST_CMDID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_CHANNEL_LIST_CMDID\n", DBGARG)); + status = wmi_channelList_reply_rx(wmip, datap, len); + break; + case (WMI_GET_TX_PWR_CMDID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_TX_PWR_CMDID\n", DBGARG)); + status = wmi_txPwr_reply_rx(wmip, datap, len); + break; + case (WMI_READY_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_READY_EVENTID\n", DBGARG)); + status = wmi_ready_event_rx(wmip, datap, len); + A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); + A_WMI_DBGLOG_INIT_DONE(wmip->wmi_devt); + break; + case (WMI_CONNECT_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CONNECT_EVENTID\n", DBGARG)); + status = wmi_connect_event_rx(wmip, datap, len); + A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); + break; + case (WMI_DISCONNECT_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_DISCONNECT_EVENTID\n", DBGARG)); + status = wmi_disconnect_event_rx(wmip, datap, len); + A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); + break; + case (WMI_TKIP_MICERR_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TKIP_MICERR_EVENTID\n", DBGARG)); + status = wmi_tkip_micerr_event_rx(wmip, datap, len); + break; + case (WMI_BSSINFO_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_BSSINFO_EVENTID\n", DBGARG)); + status = wmi_bssInfo_event_rx(wmip, datap, len); + A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); + break; + case (WMI_REGDOMAIN_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REGDOMAIN_EVENTID\n", DBGARG)); + status = wmi_regDomain_event_rx(wmip, datap, len); + break; + case (WMI_PSTREAM_TIMEOUT_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_PSTREAM_TIMEOUT_EVENTID\n", DBGARG)); + status = wmi_pstream_timeout_event_rx(wmip, datap, len); + /* pstreams are fatpipe abstractions that get implicitly created. + * User apps only deal with thinstreams. creation of a thinstream + * by the user or data traffic flow in an AC triggers implicit + * pstream creation. Do we need to send this event to App..? + * no harm in sending it. + */ + A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); + break; + case (WMI_NEIGHBOR_REPORT_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_NEIGHBOR_REPORT_EVENTID\n", DBGARG)); + status = wmi_neighborReport_event_rx(wmip, datap, len); + break; + case (WMI_SCAN_COMPLETE_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_SCAN_COMPLETE_EVENTID\n", DBGARG)); + status = wmi_scanComplete_rx(wmip, datap, len); + A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); + break; + case (WMI_CMDERROR_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CMDERROR_EVENTID\n", DBGARG)); + status = wmi_errorEvent_rx(wmip, datap, len); + break; + case (WMI_REPORT_STATISTICS_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_STATISTICS_EVENTID\n", DBGARG)); + status = wmi_statsEvent_rx(wmip, datap, len); + break; + case (WMI_RSSI_THRESHOLD_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_RSSI_THRESHOLD_EVENTID\n", DBGARG)); + status = wmi_rssiThresholdEvent_rx(wmip, datap, len); + break; + case (WMI_ERROR_REPORT_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_ERROR_REPORT_EVENTID\n", DBGARG)); + status = wmi_reportErrorEvent_rx(wmip, datap, len); + A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); + break; + case (WMI_OPT_RX_FRAME_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_OPT_RX_FRAME_EVENTID\n", DBGARG)); + status = wmi_opt_frame_event_rx(wmip, datap, len); + break; + case (WMI_REPORT_ROAM_TBL_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_ROAM_TBL_EVENTID\n", DBGARG)); + status = wmi_roam_tbl_event_rx(wmip, datap, len); + break; + case (WMI_EXTENSION_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_EXTENSION_EVENTID\n", DBGARG)); + status = wmi_control_rx_xtnd(wmip, osbuf); + break; + case (WMI_CAC_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_CAC_EVENTID\n", DBGARG)); + status = wmi_cac_event_rx(wmip, datap, len); + break; + case (WMI_REPORT_ROAM_DATA_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_REPORT_ROAM_DATA_EVENTID\n", DBGARG)); + status = wmi_roam_data_event_rx(wmip, datap, len); + break; +#ifdef CONFIG_HOST_TCMD_SUPPORT + case (WMI_TEST_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TEST_EVENTID\n", DBGARG)); + status = wmi_tcmd_test_report_rx(wmip, datap, len); + break; +#endif + case (WMI_GET_FIXRATES_CMDID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_FIXRATES_CMDID\n", DBGARG)); + status = wmi_ratemask_reply_rx(wmip, datap, len); + break; + case (WMI_TX_RETRY_ERR_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_TX_RETRY_ERR_EVENTID\n", DBGARG)); + status = wmi_txRetryErrEvent_rx(wmip, datap, len); + A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); + break; + case (WMI_SNR_THRESHOLD_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_SNR_THRESHOLD_EVENTID\n", DBGARG)); + status = wmi_snrThresholdEvent_rx(wmip, datap, len); + A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); + break; + case (WMI_LQ_THRESHOLD_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_LQ_THRESHOLD_EVENTID\n", DBGARG)); + status = wmi_lqThresholdEvent_rx(wmip, datap, len); + A_WMI_SEND_EVENT_TO_APP(wmip->wmi_devt, id, datap, len); + break; + case (WMI_APLIST_EVENTID): + AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Received APLIST Event\n")); + status = wmi_aplistEvent_rx(wmip, datap, len); + break; + case (WMI_GET_KEEPALIVE_CMDID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_KEEPALIVE_CMDID\n", DBGARG)); + status = wmi_keepalive_reply_rx(wmip, datap, len); + break; + case (WMI_GET_WOW_LIST_EVENTID): + status = wmi_get_wow_list_event_rx(wmip, datap, len); + break; + case (WMI_GET_PMKID_LIST_EVENTID): + A_DPRINTF(DBG_WMI, (DBGFMT "WMI_GET_PMKID_LIST Event\n", DBGARG)); + status = wmi_get_pmkid_list_event_rx(wmip, datap, len); + break; + default: + A_DPRINTF(DBG_WMI|DBG_ERROR, + (DBGFMT "Unknown id 0x%x\n", DBGARG, id)); + wmip->wmi_stats.cmd_id_err++; + status = A_ERROR; + break; + } + + A_NETBUF_FREE(osbuf); + + return status; +} + +static A_STATUS +wmi_ready_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_READY_EVENT *ev = (WMI_READY_EVENT *)datap; + + if (len < sizeof(WMI_READY_EVENT)) { + return A_EINVAL; + } + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + wmip->wmi_ready = TRUE; + A_WMI_READY_EVENT(wmip->wmi_devt, ev->macaddr, ev->phyCapability); + + return A_OK; +} + +static A_STATUS +wmi_connect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_CONNECT_EVENT *ev; + + if (len < sizeof(WMI_CONNECT_EVENT)) { + return A_EINVAL; + } + ev = (WMI_CONNECT_EVENT *)datap; + A_DPRINTF(DBG_WMI, + (DBGFMT "freq %d bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n", + DBGARG, ev->channel, + ev->bssid[0], ev->bssid[1], ev->bssid[2], + ev->bssid[3], ev->bssid[4], ev->bssid[5])); + + A_MEMCPY(wmip->wmi_bssid, ev->bssid, ATH_MAC_LEN); + + A_WMI_CONNECT_EVENT(wmip->wmi_devt, ev->channel, ev->bssid, + ev->listenInterval, ev->beaconInterval, + ev->networkType, ev->beaconIeLen, + ev->assocReqLen, ev->assocRespLen, + ev->assocInfo); + + return A_OK; +} + +static A_STATUS +wmi_regDomain_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_REG_DOMAIN_EVENT *ev; + + if (len < sizeof(*ev)) { + return A_EINVAL; + } + ev = (WMI_REG_DOMAIN_EVENT *)datap; + + A_WMI_REGDOMAIN_EVENT(wmip->wmi_devt, ev->regDomain); + + return A_OK; +} + +static A_STATUS +wmi_neighborReport_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_NEIGHBOR_REPORT_EVENT *ev; + int numAps; + + if (len < sizeof(*ev)) { + return A_EINVAL; + } + ev = (WMI_NEIGHBOR_REPORT_EVENT *)datap; + numAps = ev->numberOfAps; + + if (len < (int)(sizeof(*ev) + ((numAps - 1) * sizeof(WMI_NEIGHBOR_INFO)))) { + return A_EINVAL; + } + + A_WMI_NEIGHBORREPORT_EVENT(wmip->wmi_devt, numAps, ev->neighbor); + + return A_OK; +} + +static A_STATUS +wmi_disconnect_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_DISCONNECT_EVENT *ev; + + if (len < sizeof(WMI_DISCONNECT_EVENT)) { + return A_EINVAL; + } + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + ev = (WMI_DISCONNECT_EVENT *)datap; + + A_MEMZERO(wmip->wmi_bssid, sizeof(wmip->wmi_bssid)); + + A_WMI_DISCONNECT_EVENT(wmip->wmi_devt, ev->disconnectReason, ev->bssid, + ev->assocRespLen, ev->assocInfo, ev->protocolReasonStatus); + + return A_OK; +} + +static A_STATUS +wmi_tkip_micerr_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_TKIP_MICERR_EVENT *ev; + + if (len < sizeof(*ev)) { + return A_EINVAL; + } + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + ev = (WMI_TKIP_MICERR_EVENT *)datap; + A_WMI_TKIP_MICERR_EVENT(wmip->wmi_devt, ev->keyid, ev->ismcast); + + return A_OK; +} + +static A_STATUS +wmi_bssInfo_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + bss_t *bss; + WMI_BSS_INFO_HDR *bih; + A_UINT8 *buf; + A_UINT32 nodeCachingAllowed; + + if (len <= sizeof(WMI_BSS_INFO_HDR)) { + return A_EINVAL; + } + + A_WMI_BSSINFO_EVENT_RX(wmip->wmi_devt, datap, len); + /* What is driver config for wlan node caching? */ + if(ar6000_get_driver_cfg(wmip->wmi_devt, + AR6000_DRIVER_CFG_GET_WLANNODECACHING, + &nodeCachingAllowed) != A_OK) { + return A_EINVAL; + } + + if(!nodeCachingAllowed) { + return A_OK; + } + + + bih = (WMI_BSS_INFO_HDR *)datap; + buf = datap + sizeof(WMI_BSS_INFO_HDR); + len -= sizeof(WMI_BSS_INFO_HDR); + + A_DPRINTF(DBG_WMI2, (DBGFMT "bssInfo event - ch %u, rssi %02x, " + "bssid \"%02x:%02x:%02x:%02x:%02x:%02x\"\n", DBGARG, + bih->channel, (unsigned char) bih->rssi, bih->bssid[0], + bih->bssid[1], bih->bssid[2], bih->bssid[3], bih->bssid[4], + bih->bssid[5])); + + if(wps_enable && (bih->frameType == PROBERESP_FTYPE) ) { + printk("%s() A_OK 2\n", __FUNCTION__); + return A_OK; + } + + bss = wlan_find_node(&wmip->wmi_scan_table, bih->bssid); + if (bss != NULL) { + /* + * Free up the node. Not the most efficient process given + * we are about to allocate a new node but it is simple and should be + * adequate. + */ + wlan_node_reclaim(&wmip->wmi_scan_table, bss); + } + + bss = wlan_node_alloc(&wmip->wmi_scan_table, len); + if (bss == NULL) { + return A_NO_MEMORY; + } + + bss->ni_snr = bih->snr; + bss->ni_rssi = bih->rssi; + A_ASSERT(bss->ni_buf != NULL); + A_MEMCPY(bss->ni_buf, buf, len); + + if (wlan_parse_beacon(bss->ni_buf, len, &bss->ni_cie) != A_OK) { + wlan_node_free(bss); + return A_EINVAL; + } + + /* + * Update the frequency in ie_chan, overwriting of channel number + * which is done in wlan_parse_beacon + */ + bss->ni_cie.ie_chan = bih->channel; + wlan_setup_node(&wmip->wmi_scan_table, bss, bih->bssid); + + return A_OK; +} + +static A_STATUS +wmi_opt_frame_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + bss_t *bss; + WMI_OPT_RX_INFO_HDR *bih; + A_UINT8 *buf; + + if (len <= sizeof(WMI_OPT_RX_INFO_HDR)) { + return A_EINVAL; + } + + bih = (WMI_OPT_RX_INFO_HDR *)datap; + buf = datap + sizeof(WMI_OPT_RX_INFO_HDR); + len -= sizeof(WMI_OPT_RX_INFO_HDR); + + A_DPRINTF(DBG_WMI2, (DBGFMT "opt frame event %2.2x:%2.2x\n", DBGARG, + bih->bssid[4], bih->bssid[5])); + + bss = wlan_find_node(&wmip->wmi_scan_table, bih->bssid); + if (bss != NULL) { + /* + * Free up the node. Not the most efficient process given + * we are about to allocate a new node but it is simple and should be + * adequate. + */ + wlan_node_reclaim(&wmip->wmi_scan_table, bss); + } + + bss = wlan_node_alloc(&wmip->wmi_scan_table, len); + if (bss == NULL) { + return A_NO_MEMORY; + } + + bss->ni_snr = bih->snr; + bss->ni_cie.ie_chan = bih->channel; + A_ASSERT(bss->ni_buf != NULL); + A_MEMCPY(bss->ni_buf, buf, len); + wlan_setup_node(&wmip->wmi_scan_table, bss, bih->bssid); + + return A_OK; +} + + /* This event indicates inactivity timeout of a fatpipe(pstream) + * at the target + */ +static A_STATUS +wmi_pstream_timeout_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_PSTREAM_TIMEOUT_EVENT *ev; + + if (len < sizeof(WMI_PSTREAM_TIMEOUT_EVENT)) { + return A_EINVAL; + } + + A_DPRINTF(DBG_WMI, (DBGFMT "wmi_pstream_timeout_event_rx\n", DBGARG)); + + ev = (WMI_PSTREAM_TIMEOUT_EVENT *)datap; + + /* When the pstream (fat pipe == AC) timesout, it means there were no + * thinStreams within this pstream & it got implicitly created due to + * data flow on this AC. We start the inactivity timer only for + * implicitly created pstream. Just reset the host state. + */ + /* Set the activeTsids for this AC to 0 */ + LOCK_WMI(wmip); + wmip->wmi_streamExistsForAC[ev->trafficClass]=0; + wmip->wmi_fatPipeExists &= ~(1 << ev->trafficClass); + UNLOCK_WMI(wmip); + + /*Indicate inactivity to driver layer for this fatpipe (pstream)*/ + A_WMI_STREAM_TX_INACTIVE(wmip->wmi_devt, ev->trafficClass); + + return A_OK; +} + +static A_STATUS +wmi_bitrate_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_BIT_RATE_CMD *reply; + A_INT32 rate; + + if (len < sizeof(WMI_BIT_RATE_CMD)) { + return A_EINVAL; + } + reply = (WMI_BIT_RATE_CMD *)datap; + A_DPRINTF(DBG_WMI, + (DBGFMT "Enter - rateindex %d\n", DBGARG, reply->rateIndex)); + + if (reply->rateIndex == RATE_AUTO) { + rate = RATE_AUTO; + } else { + rate = wmi_rateTable[(A_UINT32) reply->rateIndex]; + } + + A_WMI_BITRATE_RX(wmip->wmi_devt, rate); + + return A_OK; +} + +static A_STATUS +wmi_ratemask_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_FIX_RATES_CMD *reply; + + if (len < sizeof(WMI_BIT_RATE_CMD)) { + return A_EINVAL; + } + reply = (WMI_FIX_RATES_CMD *)datap; + A_DPRINTF(DBG_WMI, + (DBGFMT "Enter - fixed rate mask %x\n", DBGARG, reply->fixRateMask)); + + A_WMI_RATEMASK_RX(wmip->wmi_devt, reply->fixRateMask); + + return A_OK; +} + +static A_STATUS +wmi_channelList_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_CHANNEL_LIST_REPLY *reply; + + if (len < sizeof(WMI_CHANNEL_LIST_REPLY)) { + return A_EINVAL; + } + reply = (WMI_CHANNEL_LIST_REPLY *)datap; + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + A_WMI_CHANNELLIST_RX(wmip->wmi_devt, reply->numChannels, + reply->channelList); + + return A_OK; +} + +static A_STATUS +wmi_txPwr_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_TX_PWR_REPLY *reply; + + if (len < sizeof(*reply)) { + return A_EINVAL; + } + reply = (WMI_TX_PWR_REPLY *)datap; + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + A_WMI_TXPWR_RX(wmip->wmi_devt, reply->dbM); + + return A_OK; +} +static A_STATUS +wmi_keepalive_reply_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_GET_KEEPALIVE_CMD *reply; + + if (len < sizeof(*reply)) { + return A_EINVAL; + } + reply = (WMI_GET_KEEPALIVE_CMD *)datap; + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + A_WMI_KEEPALIVE_RX(wmip->wmi_devt, reply->configured); + + return A_OK; +} + + +static A_STATUS +wmi_dset_open_req_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMIX_DSETOPENREQ_EVENT *dsetopenreq; + + if (len < sizeof(WMIX_DSETOPENREQ_EVENT)) { + return A_EINVAL; + } + dsetopenreq = (WMIX_DSETOPENREQ_EVENT *)datap; + A_DPRINTF(DBG_WMI, + (DBGFMT "Enter - dset_id=0x%x\n", DBGARG, dsetopenreq->dset_id)); + A_WMI_DSET_OPEN_REQ(wmip->wmi_devt, + dsetopenreq->dset_id, + dsetopenreq->targ_dset_handle, + dsetopenreq->targ_reply_fn, + dsetopenreq->targ_reply_arg); + + return A_OK; +} + +#ifdef CONFIG_HOST_DSET_SUPPORT +static A_STATUS +wmi_dset_close_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMIX_DSETCLOSE_EVENT *dsetclose; + + if (len < sizeof(WMIX_DSETCLOSE_EVENT)) { + return A_EINVAL; + } + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + dsetclose = (WMIX_DSETCLOSE_EVENT *)datap; + A_WMI_DSET_CLOSE(wmip->wmi_devt, dsetclose->access_cookie); + + return A_OK; +} + +static A_STATUS +wmi_dset_data_req_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMIX_DSETDATAREQ_EVENT *dsetdatareq; + + if (len < sizeof(WMIX_DSETDATAREQ_EVENT)) { + return A_EINVAL; + } + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + dsetdatareq = (WMIX_DSETDATAREQ_EVENT *)datap; + A_WMI_DSET_DATA_REQ(wmip->wmi_devt, + dsetdatareq->access_cookie, + dsetdatareq->offset, + dsetdatareq->length, + dsetdatareq->targ_buf, + dsetdatareq->targ_reply_fn, + dsetdatareq->targ_reply_arg); + + return A_OK; +} +#endif /* CONFIG_HOST_DSET_SUPPORT */ + +static A_STATUS +wmi_scanComplete_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_SCAN_COMPLETE_EVENT *ev; + + ev = (WMI_SCAN_COMPLETE_EVENT *)datap; + A_WMI_SCANCOMPLETE_EVENT(wmip->wmi_devt, ev->status); + + return A_OK; +} + +/* + * Target is reporting a programming error. This is for + * developer aid only. Target only checks a few common violations + * and it is responsibility of host to do all error checking. + * Behavior of target after wmi error event is undefined. + * A reset is recommended. + */ +static A_STATUS +wmi_errorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_CMD_ERROR_EVENT *ev; + + ev = (WMI_CMD_ERROR_EVENT *)datap; + AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Programming Error: cmd=%d ", ev->commandId)); + switch (ev->errorCode) { + case (INVALID_PARAM): + AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Illegal Parameter\n")); + break; + case (ILLEGAL_STATE): + AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Illegal State\n")); + break; + case (INTERNAL_ERROR): + AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Internal Error\n")); + break; + } + + return A_OK; +} + + +static A_STATUS +wmi_statsEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_TARGET_STATS *reply; + + if (len < sizeof(*reply)) { + return A_EINVAL; + } + reply = (WMI_TARGET_STATS *)datap; + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + A_WMI_TARGETSTATS_EVENT(wmip->wmi_devt, reply); + + return A_OK; +} + +static A_STATUS +wmi_rssiThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_RSSI_THRESHOLD_EVENT *reply; + + if (len < sizeof(*reply)) { + return A_EINVAL; + } + reply = (WMI_RSSI_THRESHOLD_EVENT *)datap; + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + A_WMI_RSSI_THRESHOLD_EVENT(wmip->wmi_devt, reply->range, reply->rssi); + + return A_OK; +} + + +static A_STATUS +wmi_reportErrorEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_TARGET_ERROR_REPORT_EVENT *reply; + + if (len < sizeof(*reply)) { + return A_EINVAL; + } + reply = (WMI_TARGET_ERROR_REPORT_EVENT *)datap; + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + A_WMI_REPORT_ERROR_EVENT(wmip->wmi_devt, reply->errorVal); + + return A_OK; +} + +static A_STATUS +wmi_cac_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_CAC_EVENT *reply; + + if (len < sizeof(*reply)) { + return A_EINVAL; + } + reply = (WMI_CAC_EVENT *)datap; + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + A_WMI_CAC_EVENT(wmip->wmi_devt, reply->ac, + reply->cac_indication, reply->statusCode, + reply->tspecSuggestion); + + return A_OK; +} + +static A_STATUS +wmi_hbChallengeResp_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMIX_HB_CHALLENGE_RESP_EVENT *reply; + + if (len < sizeof(*reply)) { + return A_EINVAL; + } + reply = (WMIX_HB_CHALLENGE_RESP_EVENT *)datap; + A_DPRINTF(DBG_WMI, (DBGFMT "wmi: challenge response event\n", DBGARG)); + + A_WMI_HBCHALLENGERESP_EVENT(wmip->wmi_devt, reply->cookie, reply->source); + + return A_OK; +} + +static A_STATUS +wmi_roam_tbl_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_TARGET_ROAM_TBL *reply; + + if (len < sizeof(*reply)) { + return A_EINVAL; + } + reply = (WMI_TARGET_ROAM_TBL *)datap; + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + A_WMI_ROAM_TABLE_EVENT(wmip->wmi_devt, reply); + + return A_OK; +} + +static A_STATUS +wmi_roam_data_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_TARGET_ROAM_DATA *reply; + + if (len < sizeof(*reply)) { + return A_EINVAL; + } + reply = (WMI_TARGET_ROAM_DATA *)datap; + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + A_WMI_ROAM_DATA_EVENT(wmip->wmi_devt, reply); + + return A_OK; +} + +static A_STATUS +wmi_txRetryErrEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_TX_RETRY_ERR_EVENT *reply; + + if (len < sizeof(*reply)) { + return A_EINVAL; + } + reply = (WMI_TX_RETRY_ERR_EVENT *)datap; + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + A_WMI_TX_RETRY_ERR_EVENT(wmip->wmi_devt); + + return A_OK; +} + +static A_STATUS +wmi_snrThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_SNR_THRESHOLD_EVENT *reply; + + if (len < sizeof(*reply)) { + return A_EINVAL; + } + reply = (WMI_SNR_THRESHOLD_EVENT *)datap; + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + A_WMI_SNR_THRESHOLD_EVENT_RX(wmip->wmi_devt, reply->range, reply->snr); + + return A_OK; +} + +static A_STATUS +wmi_lqThresholdEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_LQ_THRESHOLD_EVENT *reply; + + if (len < sizeof(*reply)) { + return A_EINVAL; + } + reply = (WMI_LQ_THRESHOLD_EVENT *)datap; + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + A_WMI_LQ_THRESHOLD_EVENT_RX(wmip->wmi_devt, reply->range, reply->lq); + + return A_OK; +} + +static A_STATUS +wmi_aplistEvent_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + A_UINT16 ap_info_entry_size; + WMI_APLIST_EVENT *ev = (WMI_APLIST_EVENT *)datap; + WMI_AP_INFO_V1 *ap_info_v1; + A_UINT8 i; + + if (len < sizeof(WMI_APLIST_EVENT)) { + return A_EINVAL; + } + + if (ev->apListVer == APLIST_VER1) { + ap_info_entry_size = sizeof(WMI_AP_INFO_V1); + ap_info_v1 = (WMI_AP_INFO_V1 *)ev->apList; + } else { + return A_EINVAL; + } + + AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("Number of APs in APLIST Event is %d\n", ev->numAP)); + if (len < (int)(sizeof(WMI_APLIST_EVENT) + + (ev->numAP - 1) * ap_info_entry_size)) + { + return A_EINVAL; + } + + /* + * AP List Ver1 Contents + */ + for (i = 0; i < ev->numAP; i++) { + AR_DEBUG_PRINTF(ATH_DEBUG_WMI, ("AP#%d BSSID %2.2x %2.2x %2.2x %2.2x %2.2x %2.2x "\ + "Channel %d\n", i, + ap_info_v1->bssid[0], ap_info_v1->bssid[1], + ap_info_v1->bssid[2], ap_info_v1->bssid[3], + ap_info_v1->bssid[4], ap_info_v1->bssid[5], + ap_info_v1->channel)); + ap_info_v1++; + } + return A_OK; +} + +static A_STATUS +wmi_dbglog_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + A_UINT32 dropped; + + dropped = *((A_UINT32 *)datap); + datap += sizeof(dropped); + len -= sizeof(dropped); + A_WMI_DBGLOG_EVENT(wmip->wmi_devt, dropped, datap, len); + return A_OK; +} + +#ifdef CONFIG_HOST_GPIO_SUPPORT +static A_STATUS +wmi_gpio_intr_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMIX_GPIO_INTR_EVENT *gpio_intr = (WMIX_GPIO_INTR_EVENT *)datap; + + A_DPRINTF(DBG_WMI, + (DBGFMT "Enter - intrmask=0x%x input=0x%x.\n", DBGARG, + gpio_intr->intr_mask, gpio_intr->input_values)); + + A_WMI_GPIO_INTR_RX(gpio_intr->intr_mask, gpio_intr->input_values); + + return A_OK; +} + +static A_STATUS +wmi_gpio_data_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMIX_GPIO_DATA_EVENT *gpio_data = (WMIX_GPIO_DATA_EVENT *)datap; + + A_DPRINTF(DBG_WMI, + (DBGFMT "Enter - reg=%d value=0x%x\n", DBGARG, + gpio_data->reg_id, gpio_data->value)); + + A_WMI_GPIO_DATA_RX(gpio_data->reg_id, gpio_data->value); + + return A_OK; +} + +static A_STATUS +wmi_gpio_ack_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + A_WMI_GPIO_ACK_RX(); + + return A_OK; +} +#endif /* CONFIG_HOST_GPIO_SUPPORT */ + +/* + * Called to send a wmi command. Command specific data is already built + * on osbuf and current osbuf->data points to it. + */ +A_STATUS +wmi_cmd_send(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId, + WMI_SYNC_FLAG syncflag) +{ +#define IS_LONG_CMD(cmdId) ((cmdId == WMI_OPT_TX_FRAME_CMDID) || (cmdId == WMI_ADD_WOW_PATTERN_CMDID)) + WMI_CMD_HDR *cHdr; + WMI_PRI_STREAM_ID streamID = WMI_CONTROL_PRI; + + A_ASSERT(osbuf != NULL); + + if (syncflag >= END_WMIFLAG) { + return A_EINVAL; + } + + if ((syncflag == SYNC_BEFORE_WMIFLAG) || (syncflag == SYNC_BOTH_WMIFLAG)) { + /* + * We want to make sure all data currently queued is transmitted before + * the cmd execution. Establish a new sync point. + */ + wmi_sync_point(wmip); + } + + if (A_NETBUF_PUSH(osbuf, sizeof(WMI_CMD_HDR)) != A_OK) { + return A_NO_MEMORY; + } + + cHdr = (WMI_CMD_HDR *)A_NETBUF_DATA(osbuf); + cHdr->commandId = cmdId; + + /* + * Send cmd, some via control pipe, others via data pipe + */ + if (IS_LONG_CMD(cmdId)) { + wmi_data_hdr_add(wmip, osbuf, CNTL_MSGTYPE); + // TODO ... these can now go through the control endpoint via HTC 2.0 + streamID = WMI_BEST_EFFORT_PRI; + } + A_WMI_CONTROL_TX(wmip->wmi_devt, osbuf, streamID); + + if ((syncflag == SYNC_AFTER_WMIFLAG) || (syncflag == SYNC_BOTH_WMIFLAG)) { + /* + * We want to make sure all new data queued waits for the command to + * execute. Establish a new sync point. + */ + wmi_sync_point(wmip); + } + return (A_OK); +#undef IS_LONG_CMD +} + +A_STATUS +wmi_cmd_send_xtnd(struct wmi_t *wmip, void *osbuf, WMI_COMMAND_ID cmdId, + WMI_SYNC_FLAG syncflag) +{ + WMIX_CMD_HDR *cHdr; + + if (A_NETBUF_PUSH(osbuf, sizeof(WMIX_CMD_HDR)) != A_OK) { + return A_NO_MEMORY; + } + + cHdr = (WMIX_CMD_HDR *)A_NETBUF_DATA(osbuf); + cHdr->commandId = cmdId; + + return wmi_cmd_send(wmip, osbuf, WMI_EXTENSION_CMDID, syncflag); +} + +A_STATUS +wmi_connect_cmd(struct wmi_t *wmip, NETWORK_TYPE netType, + DOT11_AUTH_MODE dot11AuthMode, AUTH_MODE authMode, + CRYPTO_TYPE pairwiseCrypto, A_UINT8 pairwiseCryptoLen, + CRYPTO_TYPE groupCrypto,A_UINT8 groupCryptoLen, + int ssidLength, A_UCHAR *ssid, + A_UINT8 *bssid, A_UINT16 channel, A_UINT32 ctrl_flags) +{ + void *osbuf; + WMI_CONNECT_CMD *cc; + + if ((pairwiseCrypto == NONE_CRYPT) && (groupCrypto != NONE_CRYPT)) { + return A_EINVAL; + } + if ((pairwiseCrypto != NONE_CRYPT) && (groupCrypto == NONE_CRYPT)) { + return A_EINVAL; + } + + osbuf = A_NETBUF_ALLOC(sizeof(WMI_CONNECT_CMD)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(WMI_CONNECT_CMD)); + + cc = (WMI_CONNECT_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cc, sizeof(*cc)); + + A_MEMCPY(cc->ssid, ssid, ssidLength); + cc->ssidLength = ssidLength; + cc->networkType = netType; + cc->dot11AuthMode = dot11AuthMode; + cc->authMode = authMode; + cc->pairwiseCryptoType = pairwiseCrypto; + cc->pairwiseCryptoLen = pairwiseCryptoLen; + cc->groupCryptoType = groupCrypto; + cc->groupCryptoLen = groupCryptoLen; + cc->channel = channel; + cc->ctrl_flags = ctrl_flags; + + if (bssid != NULL) { + A_MEMCPY(cc->bssid, bssid, ATH_MAC_LEN); + } + if (wmi_set_keepalive_cmd(wmip, wmip->wmi_keepaliveInterval) != A_OK) { + return(A_ERROR); + } + + return (wmi_cmd_send(wmip, osbuf, WMI_CONNECT_CMDID, NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_reconnect_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT16 channel) +{ + void *osbuf; + WMI_RECONNECT_CMD *cc; + + osbuf = A_NETBUF_ALLOC(sizeof(WMI_RECONNECT_CMD)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(WMI_RECONNECT_CMD)); + + cc = (WMI_RECONNECT_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cc, sizeof(*cc)); + + cc->channel = channel; + + if (bssid != NULL) { + A_MEMCPY(cc->bssid, bssid, ATH_MAC_LEN); + } + + return (wmi_cmd_send(wmip, osbuf, WMI_RECONNECT_CMDID, NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_disconnect_cmd(struct wmi_t *wmip) +{ + void *osbuf; + A_STATUS status; + + osbuf = A_NETBUF_ALLOC(0); /* no payload */ + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + /* Bug fix for 24817(elevator bug) - the disconnect command does not + need to do a SYNC before.*/ + status = (wmi_cmd_send(wmip, osbuf, WMI_DISCONNECT_CMDID, + NO_SYNC_WMIFLAG)); + + return status; +} + +A_STATUS +wmi_startscan_cmd(struct wmi_t *wmip, WMI_SCAN_TYPE scanType, + A_BOOL forceFgScan, A_BOOL isLegacy, + A_UINT32 homeDwellTime, A_UINT32 forceScanInterval) +{ + void *osbuf; + WMI_START_SCAN_CMD *sc; + + if ((scanType != WMI_LONG_SCAN) && (scanType != WMI_SHORT_SCAN)) { + return A_EINVAL; + } + + osbuf = A_NETBUF_ALLOC(sizeof(*sc)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*sc)); + + sc = (WMI_START_SCAN_CMD *)(A_NETBUF_DATA(osbuf)); + sc->scanType = scanType; + sc->forceFgScan = forceFgScan; + sc->isLegacy = isLegacy; + sc->homeDwellTime = homeDwellTime; + sc->forceScanInterval = forceScanInterval; + + return (wmi_cmd_send(wmip, osbuf, WMI_START_SCAN_CMDID, NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_scanparams_cmd(struct wmi_t *wmip, A_UINT16 fg_start_sec, + A_UINT16 fg_end_sec, A_UINT16 bg_sec, + A_UINT16 minact_chdw_msec, A_UINT16 maxact_chdw_msec, + A_UINT16 pas_chdw_msec, + A_UINT8 shScanRatio, A_UINT8 scanCtrlFlags, + A_UINT32 max_dfsch_act_time) +{ + void *osbuf; + WMI_SCAN_PARAMS_CMD *sc; + + osbuf = A_NETBUF_ALLOC(sizeof(*sc)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*sc)); + + sc = (WMI_SCAN_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(sc, sizeof(*sc)); + sc->fg_start_period = fg_start_sec; + sc->fg_end_period = fg_end_sec; + sc->bg_period = bg_sec; + sc->minact_chdwell_time = minact_chdw_msec; + sc->maxact_chdwell_time = maxact_chdw_msec; + sc->pas_chdwell_time = pas_chdw_msec; + sc->shortScanRatio = shScanRatio; + sc->scanCtrlFlags = scanCtrlFlags; + sc->max_dfsch_act_time = max_dfsch_act_time; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_SCAN_PARAMS_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_bssfilter_cmd(struct wmi_t *wmip, A_UINT8 filter, A_UINT32 ieMask) +{ + void *osbuf; + WMI_BSS_FILTER_CMD *cmd; + + if (filter >= LAST_BSS_FILTER) { + return A_EINVAL; + } + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_BSS_FILTER_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->bssFilter = filter; + cmd->ieMask = ieMask; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_BSS_FILTER_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_probedSsid_cmd(struct wmi_t *wmip, A_UINT8 index, A_UINT8 flag, + A_UINT8 ssidLength, A_UCHAR *ssid) +{ + void *osbuf; + WMI_PROBED_SSID_CMD *cmd; + + if (index > MAX_PROBED_SSID_INDEX) { + return A_EINVAL; + } + if (ssidLength > sizeof(cmd->ssid)) { + return A_EINVAL; + } + if ((flag & (DISABLE_SSID_FLAG | ANY_SSID_FLAG)) && (ssidLength > 0)) { + return A_EINVAL; + } + if ((flag & SPECIFIC_SSID_FLAG) && !ssidLength) { + return A_EINVAL; + } + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_PROBED_SSID_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->entryIndex = index; + cmd->flag = flag; + cmd->ssidLength = ssidLength; + A_MEMCPY(cmd->ssid, ssid, ssidLength); + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_PROBED_SSID_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_listeninterval_cmd(struct wmi_t *wmip, A_UINT16 listenInterval, A_UINT16 listenBeacons) +{ + void *osbuf; + WMI_LISTEN_INT_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_LISTEN_INT_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->listenInterval = listenInterval; + cmd->numBeacons = listenBeacons; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_LISTEN_INT_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_bmisstime_cmd(struct wmi_t *wmip, A_UINT16 bmissTime, A_UINT16 bmissBeacons) +{ + void *osbuf; + WMI_BMISS_TIME_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_BMISS_TIME_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->bmissTime = bmissTime; + cmd->numBeacons = bmissBeacons; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_BMISS_TIME_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_associnfo_cmd(struct wmi_t *wmip, A_UINT8 ieType, + A_UINT8 ieLen, A_UINT8 *ieInfo) +{ + void *osbuf; + WMI_SET_ASSOC_INFO_CMD *cmd; + A_UINT16 cmdLen; + + cmdLen = sizeof(*cmd) + ieLen - 1; + osbuf = A_NETBUF_ALLOC(cmdLen); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, cmdLen); + + cmd = (WMI_SET_ASSOC_INFO_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, cmdLen); + cmd->ieType = ieType; + cmd->bufferSize = ieLen; + A_MEMCPY(cmd->assocInfo, ieInfo, ieLen); + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_ASSOC_INFO_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_powermode_cmd(struct wmi_t *wmip, A_UINT8 powerMode) +{ + void *osbuf; + WMI_POWER_MODE_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_POWER_MODE_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->powerMode = powerMode; + wmip->wmi_powerMode = powerMode; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWER_MODE_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_ibsspmcaps_cmd(struct wmi_t *wmip, A_UINT8 pmEnable, A_UINT8 ttl, + A_UINT16 atim_windows, A_UINT16 timeout_value) +{ + void *osbuf; + WMI_IBSS_PM_CAPS_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_IBSS_PM_CAPS_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->power_saving = pmEnable; + cmd->ttl = ttl; + cmd->atim_windows = atim_windows; + cmd->timeout_value = timeout_value; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_IBSS_PM_CAPS_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_pmparams_cmd(struct wmi_t *wmip, A_UINT16 idlePeriod, + A_UINT16 psPollNum, A_UINT16 dtimPolicy) +{ + void *osbuf; + WMI_POWER_PARAMS_CMD *pm; + + osbuf = A_NETBUF_ALLOC(sizeof(*pm)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*pm)); + + pm = (WMI_POWER_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(pm, sizeof(*pm)); + pm->idle_period = idlePeriod; + pm->pspoll_number = psPollNum; + pm->dtim_policy = dtimPolicy; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWER_PARAMS_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_disctimeout_cmd(struct wmi_t *wmip, A_UINT8 timeout) +{ + void *osbuf; + WMI_DISC_TIMEOUT_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_DISC_TIMEOUT_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->disconnectTimeout = timeout; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_DISC_TIMEOUT_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_addKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex, CRYPTO_TYPE keyType, + A_UINT8 keyUsage, A_UINT8 keyLength, A_UINT8 *keyRSC, + A_UINT8 *keyMaterial, A_UINT8 key_op_ctrl, + WMI_SYNC_FLAG sync_flag) +{ + void *osbuf; + WMI_ADD_CIPHER_KEY_CMD *cmd; + + if ((keyIndex > WMI_MAX_KEY_INDEX) || (keyLength > WMI_MAX_KEY_LEN) || + (keyMaterial == NULL)) + { + return A_EINVAL; + } + + if ((WEP_CRYPT != keyType) && (NULL == keyRSC)) { + return A_EINVAL; + } + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_ADD_CIPHER_KEY_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->keyIndex = keyIndex; + cmd->keyType = keyType; + cmd->keyUsage = keyUsage; + cmd->keyLength = keyLength; + A_MEMCPY(cmd->key, keyMaterial, keyLength); + if (NULL != keyRSC) { + A_MEMCPY(cmd->keyRSC, keyRSC, sizeof(cmd->keyRSC)); + } + cmd->key_op_ctrl = key_op_ctrl; + + return (wmi_cmd_send(wmip, osbuf, WMI_ADD_CIPHER_KEY_CMDID, sync_flag)); +} + +A_STATUS +wmi_add_krk_cmd(struct wmi_t *wmip, A_UINT8 *krk) +{ + void *osbuf; + WMI_ADD_KRK_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_ADD_KRK_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + A_MEMCPY(cmd->krk, krk, WMI_KRK_LEN); + + return (wmi_cmd_send(wmip, osbuf, WMI_ADD_KRK_CMDID, NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_delete_krk_cmd(struct wmi_t *wmip) +{ + void *osbuf; + + osbuf = A_NETBUF_ALLOC(0); + + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_KRK_CMDID, NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_deleteKey_cmd(struct wmi_t *wmip, A_UINT8 keyIndex) +{ + void *osbuf; + WMI_DELETE_CIPHER_KEY_CMD *cmd; + + if (keyIndex > WMI_MAX_KEY_INDEX) { + return A_EINVAL; + } + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_DELETE_CIPHER_KEY_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->keyIndex = keyIndex; + + return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_CIPHER_KEY_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_setPmkid_cmd(struct wmi_t *wmip, A_UINT8 *bssid, A_UINT8 *pmkId, + A_BOOL set) +{ + void *osbuf; + WMI_SET_PMKID_CMD *cmd; + + if (bssid == NULL) { + return A_EINVAL; + } + + if ((set == TRUE) && (pmkId == NULL)) { + return A_EINVAL; + } + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_PMKID_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid)); + if (set == TRUE) { + A_MEMCPY(cmd->pmkid, pmkId, sizeof(cmd->pmkid)); + cmd->enable = PMKID_ENABLE; + } else { + A_MEMZERO(cmd->pmkid, sizeof(cmd->pmkid)); + cmd->enable = PMKID_DISABLE; + } + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_PMKID_CMDID, NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_tkip_countermeasures_cmd(struct wmi_t *wmip, A_BOOL en) +{ + void *osbuf; + WMI_SET_TKIP_COUNTERMEASURES_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_TKIP_COUNTERMEASURES_CMD *)(A_NETBUF_DATA(osbuf)); + cmd->cm_en = (en == TRUE)? WMI_TKIP_CM_ENABLE : WMI_TKIP_CM_DISABLE; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_TKIP_COUNTERMEASURES_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_akmp_params_cmd(struct wmi_t *wmip, + WMI_SET_AKMP_PARAMS_CMD *akmpParams) +{ + void *osbuf; + WMI_SET_AKMP_PARAMS_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + cmd = (WMI_SET_AKMP_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); + cmd->akmpInfo = akmpParams->akmpInfo; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_AKMP_PARAMS_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_pmkid_list_cmd(struct wmi_t *wmip, + WMI_SET_PMKID_LIST_CMD *pmkInfo) +{ + void *osbuf; + WMI_SET_PMKID_LIST_CMD *cmd; + A_UINT16 cmdLen; + A_UINT8 i; + + cmdLen = sizeof(pmkInfo->numPMKID) + + pmkInfo->numPMKID * sizeof(WMI_PMKID); + + osbuf = A_NETBUF_ALLOC(cmdLen); + + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, cmdLen); + cmd = (WMI_SET_PMKID_LIST_CMD *)(A_NETBUF_DATA(osbuf)); + cmd->numPMKID = pmkInfo->numPMKID; + + for (i = 0; i < cmd->numPMKID; i++) { + A_MEMCPY(&cmd->pmkidList[i], &pmkInfo->pmkidList[i], + WMI_PMKID_LEN); + } + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_PMKID_LIST_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_get_pmkid_list_cmd(struct wmi_t *wmip) +{ + void *osbuf; + + osbuf = A_NETBUF_ALLOC(0); /* no payload */ + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + return (wmi_cmd_send(wmip, osbuf, WMI_GET_PMKID_LIST_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_dataSync_send(struct wmi_t *wmip, void *osbuf, WMI_PRI_STREAM_ID streamID) +{ + WMI_DATA_HDR *dtHdr; + + A_ASSERT(streamID != WMI_CONTROL_PRI); + A_ASSERT(osbuf != NULL); + + if (A_NETBUF_PUSH(osbuf, sizeof(WMI_DATA_HDR)) != A_OK) { + return A_NO_MEMORY; + } + + dtHdr = (WMI_DATA_HDR *)A_NETBUF_DATA(osbuf); + dtHdr->info = + (SYNC_MSGTYPE & WMI_DATA_HDR_MSG_TYPE_MASK) << WMI_DATA_HDR_MSG_TYPE_SHIFT; + + A_DPRINTF(DBG_WMI, (DBGFMT "Enter - streamID %d\n", DBGARG, streamID)); + + return (A_WMI_CONTROL_TX(wmip->wmi_devt, osbuf, streamID)); +} + +typedef struct _WMI_DATA_SYNC_BUFS { + A_UINT8 trafficClass; + void *osbuf; +}WMI_DATA_SYNC_BUFS; + +static A_STATUS +wmi_sync_point(struct wmi_t *wmip) +{ + void *cmd_osbuf; + WMI_DATA_SYNC_BUFS dataSyncBufs[WMM_NUM_AC]; + A_UINT8 i,numPriStreams=0; + A_STATUS status; + + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + memset(dataSyncBufs,0,sizeof(dataSyncBufs)); + + /* lock out while we walk through the priority list and assemble our local array */ + LOCK_WMI(wmip); + + for (i=0; i < WMM_NUM_AC ; i++) { + if (wmip->wmi_fatPipeExists & (1 << i)) { + numPriStreams++; + dataSyncBufs[numPriStreams-1].trafficClass = i; + } + } + + UNLOCK_WMI(wmip); + + /* dataSyncBufs is now filled with entries (starting at index 0) containing valid streamIDs */ + + do { + /* + * We allocate all network buffers needed so we will be able to + * send all required frames. + */ + cmd_osbuf = A_NETBUF_ALLOC(0); /* no payload */ + if (cmd_osbuf == NULL) { + status = A_NO_MEMORY; + break; + } + + for (i=0; i < numPriStreams ; i++) { + dataSyncBufs[i].osbuf = A_NETBUF_ALLOC(0); + if (dataSyncBufs[i].osbuf == NULL) { + status = A_NO_MEMORY; + break; + } + } //end for + + /* + * Send sync cmd followed by sync data messages on all endpoints being + * used + */ + status = wmi_cmd_send(wmip, cmd_osbuf, WMI_SYNCHRONIZE_CMDID, + NO_SYNC_WMIFLAG); + + if (A_FAILED(status)) { + break; + } + /* cmd buffer sent, we no longer own it */ + cmd_osbuf = NULL; + + for(i=0; i < numPriStreams; i++) { + A_ASSERT(dataSyncBufs[i].osbuf != NULL); + + status = wmi_dataSync_send(wmip, dataSyncBufs[i].osbuf, + WMI_ACCESSCATEGORY_WMISTREAM(wmip,dataSyncBufs[i].trafficClass)); + + if (A_FAILED(status)) { + break; + } + /* we don't own this buffer anymore, NULL it out of the array so it + * won't get cleaned up */ + dataSyncBufs[i].osbuf = NULL; + } //end for + + } while(FALSE); + + /* free up any resources left over (possibly due to an error) */ + + if (cmd_osbuf != NULL) { + A_NETBUF_FREE(cmd_osbuf); + } + + for (i = 0; i < numPriStreams; i++) { + if (dataSyncBufs[i].osbuf != NULL) { + A_NETBUF_FREE(dataSyncBufs[i].osbuf); + } + } + + return (status); +} + +A_STATUS +wmi_create_pstream_cmd(struct wmi_t *wmip, WMI_CREATE_PSTREAM_CMD *params) +{ + void *osbuf; + WMI_CREATE_PSTREAM_CMD *cmd; + A_UINT16 activeTsids=0; + A_UINT8 fatPipeExistsForAC=0; + + /* Validate all the parameters. */ + if( !((params->userPriority < 8) && + (params->userPriority <= 0x7) && + (convert_userPriority_to_trafficClass(params->userPriority) == params->trafficClass) && + (params->trafficDirection == UPLINK_TRAFFIC || + params->trafficDirection == DNLINK_TRAFFIC || + params->trafficDirection == BIDIR_TRAFFIC) && + (params->trafficType == TRAFFIC_TYPE_APERIODIC || + params->trafficType == TRAFFIC_TYPE_PERIODIC ) && + (params->voicePSCapability == DISABLE_FOR_THIS_AC || + params->voicePSCapability == ENABLE_FOR_THIS_AC || + params->voicePSCapability == ENABLE_FOR_ALL_AC) && + (params->tsid == WMI_IMPLICIT_PSTREAM || params->tsid <= WMI_MAX_THINSTREAM)) ) + { + return A_EINVAL; + } + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + A_DPRINTF(DBG_WMI, + (DBGFMT "Sending create_pstream_cmd: ac=%d tsid:%d\n", DBGARG, + params->trafficClass, params->tsid)); + + cmd = (WMI_CREATE_PSTREAM_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + A_MEMCPY(cmd, params, sizeof(*cmd)); + + /* this is an implicitly created Fat pipe */ + if (params->tsid == WMI_IMPLICIT_PSTREAM) { + LOCK_WMI(wmip); + fatPipeExistsForAC = (wmip->wmi_fatPipeExists & (1 << params->trafficClass)); + wmip->wmi_fatPipeExists |= (1<<params->trafficClass); + UNLOCK_WMI(wmip); + } else { + /* this is an explicitly created thin stream within a fat pipe */ + LOCK_WMI(wmip); + fatPipeExistsForAC = (wmip->wmi_fatPipeExists & (1 << params->trafficClass)); + activeTsids = wmip->wmi_streamExistsForAC[params->trafficClass]; + wmip->wmi_streamExistsForAC[params->trafficClass] |= (1<<params->tsid); + /* if a thinstream becomes active, the fat pipe automatically + * becomes active + */ + wmip->wmi_fatPipeExists |= (1<<params->trafficClass); + UNLOCK_WMI(wmip); + } + + /* Indicate activty change to driver layer only if this is the + * first TSID to get created in this AC explicitly or an implicit + * fat pipe is getting created. + */ + if (!fatPipeExistsForAC) { + A_WMI_STREAM_TX_ACTIVE(wmip->wmi_devt, params->trafficClass); + } + + /* mike: should be SYNC_BEFORE_WMIFLAG */ + return (wmi_cmd_send(wmip, osbuf, WMI_CREATE_PSTREAM_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_delete_pstream_cmd(struct wmi_t *wmip, A_UINT8 trafficClass, A_UINT8 tsid) +{ + void *osbuf; + WMI_DELETE_PSTREAM_CMD *cmd; + A_STATUS status; + A_UINT16 activeTsids=0; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_DELETE_PSTREAM_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + + cmd->trafficClass = trafficClass; + cmd->tsid = tsid; + + LOCK_WMI(wmip); + activeTsids = wmip->wmi_streamExistsForAC[trafficClass]; + UNLOCK_WMI(wmip); + + /* Check if the tsid was created & exists */ + if (!(activeTsids & (1<<tsid))) { + + A_DPRINTF(DBG_WMI, + (DBGFMT "TSID %d does'nt exist for trafficClass: %d\n", DBGARG, tsid, trafficClass)); + /* TODO: return a more appropriate err code */ + return A_ERROR; + } + + A_DPRINTF(DBG_WMI, + (DBGFMT "Sending delete_pstream_cmd: trafficClass: %d tsid=%d\n", DBGARG, trafficClass, tsid)); + + status = (wmi_cmd_send(wmip, osbuf, WMI_DELETE_PSTREAM_CMDID, + SYNC_BEFORE_WMIFLAG)); + + LOCK_WMI(wmip); + wmip->wmi_streamExistsForAC[trafficClass] &= ~(1<<tsid); + activeTsids = wmip->wmi_streamExistsForAC[trafficClass]; + UNLOCK_WMI(wmip); + + + /* Indicate stream inactivity to driver layer only if all tsids + * within this AC are deleted. + */ + if(!activeTsids) { + A_WMI_STREAM_TX_INACTIVE(wmip->wmi_devt, trafficClass); + wmip->wmi_fatPipeExists &= ~(1<<trafficClass); + } + + return status; +} + +/* + * used to set the bit rate. rate is in Kbps. If rate == -1 + * then auto selection is used. + */ +A_STATUS +wmi_set_bitrate_cmd(struct wmi_t *wmip, A_INT32 rate) +{ + void *osbuf; + WMI_BIT_RATE_CMD *cmd; + A_INT8 index; + + if (rate != -1) { + index = wmi_validate_bitrate(wmip, rate); + if(index == A_EINVAL){ + return A_EINVAL; + } + } else { + index = -1; + } + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_BIT_RATE_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + + cmd->rateIndex = index; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_BITRATE_CMDID, NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_get_bitrate_cmd(struct wmi_t *wmip) +{ + void *osbuf; + + osbuf = A_NETBUF_ALLOC(0); /* no payload */ + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + return (wmi_cmd_send(wmip, osbuf, WMI_GET_BITRATE_CMDID, NO_SYNC_WMIFLAG)); +} + +/* + * Returns TRUE iff the given rate index is legal in the current PHY mode. + */ +A_BOOL +wmi_is_bitrate_index_valid(struct wmi_t *wmip, A_UINT32 rateIndex) +{ + WMI_PHY_MODE phyMode = wmip->wmi_phyMode; + A_BOOL isValid = TRUE; + switch(phyMode) { + case WMI_11A_MODE: + if ((rateIndex < MODE_A_SUPPORT_RATE_START) || (rateIndex > MODE_A_SUPPORT_RATE_STOP)) { + isValid = FALSE; + } + break; + + case WMI_11B_MODE: + if ((rateIndex < MODE_B_SUPPORT_RATE_START) || (rateIndex > MODE_B_SUPPORT_RATE_STOP)) { + isValid = FALSE; + } + break; + + case WMI_11GONLY_MODE: + if ((rateIndex < MODE_GONLY_SUPPORT_RATE_START) || (rateIndex > MODE_GONLY_SUPPORT_RATE_STOP)) { + isValid = FALSE; + } + break; + + case WMI_11G_MODE: + case WMI_11AG_MODE: + if ((rateIndex < MODE_G_SUPPORT_RATE_START) || (rateIndex > MODE_G_SUPPORT_RATE_STOP)) { + isValid = FALSE; + } + break; + + default: + A_ASSERT(FALSE); + break; + } + + return isValid; +} + +A_INT8 +wmi_validate_bitrate(struct wmi_t *wmip, A_INT32 rate) +{ + A_INT8 i; + if (rate != -1) + { + for (i=0;;i++) + { + if (wmi_rateTable[(A_UINT32) i] == 0) { + return A_EINVAL; + } + if (wmi_rateTable[(A_UINT32) i] == rate) { + break; + } + } + } + else{ + i = -1; + } + + if(wmi_is_bitrate_index_valid(wmip, i) != TRUE) { + return A_EINVAL; + } + + return i; +} + +A_STATUS +wmi_set_fixrates_cmd(struct wmi_t *wmip, A_INT16 fixRatesMask) +{ + void *osbuf; + WMI_FIX_RATES_CMD *cmd; + A_UINT32 rateIndex; + + /* Make sure all rates in the mask are valid in the current PHY mode */ + for(rateIndex = 0; rateIndex < MAX_NUMBER_OF_SUPPORT_RATES; rateIndex++) { + if((1 << rateIndex) & (A_UINT32)fixRatesMask) { + if(wmi_is_bitrate_index_valid(wmip, rateIndex) != TRUE) { + A_DPRINTF(DBG_WMI, (DBGFMT "Set Fix Rates command failed: Given rate is illegal in current PHY mode\n", DBGARG)); + return A_EINVAL; + } + } + } + + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_FIX_RATES_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + + cmd->fixRateMask = fixRatesMask; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_FIXRATES_CMDID, NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_get_ratemask_cmd(struct wmi_t *wmip) +{ + void *osbuf; + + osbuf = A_NETBUF_ALLOC(0); /* no payload */ + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + return (wmi_cmd_send(wmip, osbuf, WMI_GET_FIXRATES_CMDID, NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_get_channelList_cmd(struct wmi_t *wmip) +{ + void *osbuf; + + osbuf = A_NETBUF_ALLOC(0); /* no payload */ + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + return (wmi_cmd_send(wmip, osbuf, WMI_GET_CHANNEL_LIST_CMDID, + NO_SYNC_WMIFLAG)); +} + +/* + * used to generate a wmi sey channel Parameters cmd. + * mode should always be specified and corresponds to the phy mode of the + * wlan. + * numChan should alway sbe specified. If zero indicates that all available + * channels should be used. + * channelList is an array of channel frequencies (in Mhz) which the radio + * should limit its operation to. It should be NULL if numChan == 0. Size of + * array should correspond to numChan entries. + */ +A_STATUS +wmi_set_channelParams_cmd(struct wmi_t *wmip, A_UINT8 scanParam, + WMI_PHY_MODE mode, A_INT8 numChan, + A_UINT16 *channelList) +{ + void *osbuf; + WMI_CHANNEL_PARAMS_CMD *cmd; + A_INT8 size; + + size = sizeof (*cmd); + + if (numChan) { + if (numChan > WMI_MAX_CHANNELS) { + return A_EINVAL; + } + size += sizeof(A_UINT16) * (numChan - 1); + } + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, size); + + cmd = (WMI_CHANNEL_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, size); + + wmip->wmi_phyMode = mode; + cmd->scanParam = scanParam; + cmd->phyMode = mode; + cmd->numChannels = numChan; + A_MEMCPY(cmd->channelList, channelList, numChan * sizeof(A_UINT16)); + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_CHANNEL_PARAMS_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_rssi_threshold_params(struct wmi_t *wmip, + WMI_RSSI_THRESHOLD_PARAMS_CMD *rssiCmd) +{ + void *osbuf; + A_INT8 size; + WMI_RSSI_THRESHOLD_PARAMS_CMD *cmd; + /* These values are in ascending order */ + if( rssiCmd->thresholdAbove6_Val <= rssiCmd->thresholdAbove5_Val || + rssiCmd->thresholdAbove5_Val <= rssiCmd->thresholdAbove4_Val || + rssiCmd->thresholdAbove4_Val <= rssiCmd->thresholdAbove3_Val || + rssiCmd->thresholdAbove3_Val <= rssiCmd->thresholdAbove2_Val || + rssiCmd->thresholdAbove2_Val <= rssiCmd->thresholdAbove1_Val || + rssiCmd->thresholdBelow6_Val <= rssiCmd->thresholdBelow5_Val || + rssiCmd->thresholdBelow5_Val <= rssiCmd->thresholdBelow4_Val || + rssiCmd->thresholdBelow4_Val <= rssiCmd->thresholdBelow3_Val || + rssiCmd->thresholdBelow3_Val <= rssiCmd->thresholdBelow2_Val || + rssiCmd->thresholdBelow2_Val <= rssiCmd->thresholdBelow1_Val) { + + return A_EINVAL; + } + + size = sizeof (*cmd); + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, size); + + cmd = (WMI_RSSI_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, size); + A_MEMCPY(cmd, rssiCmd, sizeof(WMI_RSSI_THRESHOLD_PARAMS_CMD)); + + return (wmi_cmd_send(wmip, osbuf, WMI_RSSI_THRESHOLD_PARAMS_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_host_sleep_mode_cmd(struct wmi_t *wmip, + WMI_SET_HOST_SLEEP_MODE_CMD *hostModeCmd) +{ + void *osbuf; + A_INT8 size; + WMI_SET_HOST_SLEEP_MODE_CMD *cmd; + + if( hostModeCmd->awake == hostModeCmd->asleep) { + return A_EINVAL; + } + + size = sizeof (*cmd); + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, size); + + cmd = (WMI_SET_HOST_SLEEP_MODE_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, size); + A_MEMCPY(cmd, hostModeCmd, sizeof(WMI_SET_HOST_SLEEP_MODE_CMD)); + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_HOST_SLEEP_MODE_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_wow_mode_cmd(struct wmi_t *wmip, + WMI_SET_WOW_MODE_CMD *wowModeCmd) +{ + void *osbuf; + A_INT8 size; + WMI_SET_WOW_MODE_CMD *cmd; + + size = sizeof (*cmd); + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, size); + + cmd = (WMI_SET_WOW_MODE_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, size); + A_MEMCPY(cmd, wowModeCmd, sizeof(WMI_SET_WOW_MODE_CMD)); + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_WOW_MODE_CMDID, + NO_SYNC_WMIFLAG)); + +} + +A_STATUS +wmi_get_wow_list_cmd(struct wmi_t *wmip, + WMI_GET_WOW_LIST_CMD *wowListCmd) +{ + void *osbuf; + A_INT8 size; + WMI_GET_WOW_LIST_CMD *cmd; + + size = sizeof (*cmd); + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, size); + + cmd = (WMI_GET_WOW_LIST_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, size); + A_MEMCPY(cmd, wowListCmd, sizeof(WMI_GET_WOW_LIST_CMD)); + + return (wmi_cmd_send(wmip, osbuf, WMI_GET_WOW_LIST_CMDID, + NO_SYNC_WMIFLAG)); + +} + +static A_STATUS +wmi_get_wow_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + WMI_GET_WOW_LIST_REPLY *reply; + + if (len < sizeof(WMI_GET_WOW_LIST_REPLY)) { + return A_EINVAL; + } + reply = (WMI_GET_WOW_LIST_REPLY *)datap; + + A_WMI_WOW_LIST_EVENT(wmip->wmi_devt, reply->num_filters, + reply); + + return A_OK; +} + +A_STATUS wmi_add_wow_pattern_cmd(struct wmi_t *wmip, + WMI_ADD_WOW_PATTERN_CMD *addWowCmd, + A_UINT8* pattern, A_UINT8* mask, + A_UINT8 pattern_size) +{ + void *osbuf; + A_INT8 size; + WMI_ADD_WOW_PATTERN_CMD *cmd; + A_UINT8 *filter_mask = NULL; + + size = sizeof (*cmd); + + size += ((2 * addWowCmd->filter_size)* sizeof(A_UINT8)); + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, size); + + cmd = (WMI_ADD_WOW_PATTERN_CMD *)(A_NETBUF_DATA(osbuf)); + cmd->filter_list_id = addWowCmd->filter_list_id; + cmd->filter_offset = addWowCmd->filter_offset; + cmd->filter_size = addWowCmd->filter_size; + + A_MEMCPY(cmd->filter, pattern, addWowCmd->filter_size); + + filter_mask = (A_UINT8*)(cmd->filter + cmd->filter_size); + A_MEMCPY(filter_mask, mask, addWowCmd->filter_size); + + + return (wmi_cmd_send(wmip, osbuf, WMI_ADD_WOW_PATTERN_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_del_wow_pattern_cmd(struct wmi_t *wmip, + WMI_DEL_WOW_PATTERN_CMD *delWowCmd) +{ + void *osbuf; + A_INT8 size; + WMI_DEL_WOW_PATTERN_CMD *cmd; + + size = sizeof (*cmd); + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, size); + + cmd = (WMI_DEL_WOW_PATTERN_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, size); + A_MEMCPY(cmd, delWowCmd, sizeof(WMI_DEL_WOW_PATTERN_CMD)); + + return (wmi_cmd_send(wmip, osbuf, WMI_DEL_WOW_PATTERN_CMDID, + NO_SYNC_WMIFLAG)); + +} + +A_STATUS +wmi_set_snr_threshold_params(struct wmi_t *wmip, + WMI_SNR_THRESHOLD_PARAMS_CMD *snrCmd) +{ + void *osbuf; + A_INT8 size; + WMI_SNR_THRESHOLD_PARAMS_CMD *cmd; + /* These values are in ascending order */ + if( snrCmd->thresholdAbove4_Val <= snrCmd->thresholdAbove3_Val || + snrCmd->thresholdAbove3_Val <= snrCmd->thresholdAbove2_Val || + snrCmd->thresholdAbove2_Val <= snrCmd->thresholdAbove1_Val || + snrCmd->thresholdBelow4_Val <= snrCmd->thresholdBelow3_Val || + snrCmd->thresholdBelow3_Val <= snrCmd->thresholdBelow2_Val || + snrCmd->thresholdBelow2_Val <= snrCmd->thresholdBelow1_Val) { + + return A_EINVAL; + } + + size = sizeof (*cmd); + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, size); + + cmd = (WMI_SNR_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, size); + A_MEMCPY(cmd, snrCmd, sizeof(WMI_SNR_THRESHOLD_PARAMS_CMD)); + + return (wmi_cmd_send(wmip, osbuf, WMI_SNR_THRESHOLD_PARAMS_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_clr_rssi_snr(struct wmi_t *wmip) +{ + void *osbuf; + + osbuf = A_NETBUF_ALLOC(sizeof(int)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + return (wmi_cmd_send(wmip, osbuf, WMI_CLR_RSSI_SNR_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_lq_threshold_params(struct wmi_t *wmip, + WMI_LQ_THRESHOLD_PARAMS_CMD *lqCmd) +{ + void *osbuf; + A_INT8 size; + WMI_LQ_THRESHOLD_PARAMS_CMD *cmd; + /* These values are in ascending order */ + if( lqCmd->thresholdAbove4_Val <= lqCmd->thresholdAbove3_Val || + lqCmd->thresholdAbove3_Val <= lqCmd->thresholdAbove2_Val || + lqCmd->thresholdAbove2_Val <= lqCmd->thresholdAbove1_Val || + lqCmd->thresholdBelow4_Val <= lqCmd->thresholdBelow3_Val || + lqCmd->thresholdBelow3_Val <= lqCmd->thresholdBelow2_Val || + lqCmd->thresholdBelow2_Val <= lqCmd->thresholdBelow1_Val ) { + + return A_EINVAL; + } + + size = sizeof (*cmd); + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, size); + + cmd = (WMI_LQ_THRESHOLD_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, size); + A_MEMCPY(cmd, lqCmd, sizeof(WMI_LQ_THRESHOLD_PARAMS_CMD)); + + return (wmi_cmd_send(wmip, osbuf, WMI_LQ_THRESHOLD_PARAMS_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_error_report_bitmask(struct wmi_t *wmip, A_UINT32 mask) +{ + void *osbuf; + A_INT8 size; + WMI_TARGET_ERROR_REPORT_BITMASK *cmd; + + size = sizeof (*cmd); + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, size); + + cmd = (WMI_TARGET_ERROR_REPORT_BITMASK *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, size); + + cmd->bitmask = mask; + + return (wmi_cmd_send(wmip, osbuf, WMI_TARGET_ERROR_REPORT_BITMASK_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_get_challenge_resp_cmd(struct wmi_t *wmip, A_UINT32 cookie, A_UINT32 source) +{ + void *osbuf; + WMIX_HB_CHALLENGE_RESP_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMIX_HB_CHALLENGE_RESP_CMD *)(A_NETBUF_DATA(osbuf)); + cmd->cookie = cookie; + cmd->source = source; + + return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_HB_CHALLENGE_RESP_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_config_debug_module_cmd(struct wmi_t *wmip, A_UINT16 mmask, + A_UINT16 tsr, A_BOOL rep, A_UINT16 size, + A_UINT32 valid) +{ + void *osbuf; + WMIX_DBGLOG_CFG_MODULE_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMIX_DBGLOG_CFG_MODULE_CMD *)(A_NETBUF_DATA(osbuf)); + cmd->config.cfgmmask = mmask; + cmd->config.cfgtsr = tsr; + cmd->config.cfgrep = rep; + cmd->config.cfgsize = size; + cmd->config.cfgvalid = valid; + + return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DBGLOG_CFG_MODULE_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_get_stats_cmd(struct wmi_t *wmip) +{ + void *osbuf; + + osbuf = A_NETBUF_ALLOC(0); /* no payload */ + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + return (wmi_cmd_send(wmip, osbuf, WMI_GET_STATISTICS_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_addBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex, A_UINT8 *bssid) +{ + void *osbuf; + WMI_ADD_BAD_AP_CMD *cmd; + + if ((bssid == NULL) || (apIndex > WMI_MAX_BAD_AP_INDEX)) { + return A_EINVAL; + } + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_ADD_BAD_AP_CMD *)(A_NETBUF_DATA(osbuf)); + cmd->badApIndex = apIndex; + A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid)); + + return (wmi_cmd_send(wmip, osbuf, WMI_ADD_BAD_AP_CMDID, NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_deleteBadAp_cmd(struct wmi_t *wmip, A_UINT8 apIndex) +{ + void *osbuf; + WMI_DELETE_BAD_AP_CMD *cmd; + + if (apIndex > WMI_MAX_BAD_AP_INDEX) { + return A_EINVAL; + } + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_DELETE_BAD_AP_CMD *)(A_NETBUF_DATA(osbuf)); + cmd->badApIndex = apIndex; + + return (wmi_cmd_send(wmip, osbuf, WMI_DELETE_BAD_AP_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_txPwr_cmd(struct wmi_t *wmip, A_UINT8 dbM) +{ + void *osbuf; + WMI_SET_TX_PWR_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_TX_PWR_CMD *)(A_NETBUF_DATA(osbuf)); + cmd->dbM = dbM; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_TX_PWR_CMDID, NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_get_txPwr_cmd(struct wmi_t *wmip) +{ + void *osbuf; + + osbuf = A_NETBUF_ALLOC(0); /* no payload */ + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + return (wmi_cmd_send(wmip, osbuf, WMI_GET_TX_PWR_CMDID, NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_switch_radio(struct wmi_t *wmip, A_UINT8 on) +{ + WMI_SCAN_PARAMS_CMD scParams = {0, 0, 0, 0, 0, + WMI_SHORTSCANRATIO_DEFAULT, + DEFAULT_SCAN_CTRL_FLAGS, + 0}; + + if (on) { + /* Enable foreground scanning */ + if (wmi_scanparams_cmd(wmip, scParams.fg_start_period, + scParams.fg_end_period, + scParams.bg_period, + scParams.minact_chdwell_time, + scParams.maxact_chdwell_time, + scParams.pas_chdwell_time, + scParams.shortScanRatio, + scParams.scanCtrlFlags, + scParams.max_dfsch_act_time) != A_OK) { + return -EIO; + } + } else { + wmi_disconnect_cmd(wmip); + if (wmi_scanparams_cmd(wmip, 0xFFFF, 0, 0, 0, + 0, 0, 0, 0xFF, 0) != A_OK) { + return -EIO; + } + } + + return A_OK; +} + + +A_UINT16 +wmi_get_mapped_qos_queue(struct wmi_t *wmip, A_UINT8 trafficClass) +{ + A_UINT16 activeTsids=0; + + LOCK_WMI(wmip); + activeTsids = wmip->wmi_streamExistsForAC[trafficClass]; + UNLOCK_WMI(wmip); + + return activeTsids; +} + +A_STATUS +wmi_get_roam_tbl_cmd(struct wmi_t *wmip) +{ + void *osbuf; + + osbuf = A_NETBUF_ALLOC(0); /* no payload */ + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + return (wmi_cmd_send(wmip, osbuf, WMI_GET_ROAM_TBL_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_get_roam_data_cmd(struct wmi_t *wmip, A_UINT8 roamDataType) +{ + void *osbuf; + A_UINT32 size = sizeof(A_UINT8); + WMI_TARGET_ROAM_DATA *cmd; + + osbuf = A_NETBUF_ALLOC(size); /* no payload */ + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, size); + + cmd = (WMI_TARGET_ROAM_DATA *)(A_NETBUF_DATA(osbuf)); + cmd->roamDataType = roamDataType; + + return (wmi_cmd_send(wmip, osbuf, WMI_GET_ROAM_DATA_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_roam_ctrl_cmd(struct wmi_t *wmip, WMI_SET_ROAM_CTRL_CMD *p, + A_UINT8 size) +{ + void *osbuf; + WMI_SET_ROAM_CTRL_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, size); + + cmd = (WMI_SET_ROAM_CTRL_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, size); + + A_MEMCPY(cmd, p, size); + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_ROAM_CTRL_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_powersave_timers_cmd(struct wmi_t *wmip, + WMI_POWERSAVE_TIMERS_POLICY_CMD *pCmd, + A_UINT8 size) +{ + void *osbuf; + WMI_POWERSAVE_TIMERS_POLICY_CMD *cmd; + + /* These timers can't be zero */ + if(!pCmd->psPollTimeout || !pCmd->triggerTimeout || + !(pCmd->apsdTimPolicy == IGNORE_TIM_ALL_QUEUES_APSD || + pCmd->apsdTimPolicy == PROCESS_TIM_ALL_QUEUES_APSD) || + !(pCmd->simulatedAPSDTimPolicy == IGNORE_TIM_SIMULATED_APSD || + pCmd->simulatedAPSDTimPolicy == PROCESS_TIM_SIMULATED_APSD)) + return A_EINVAL; + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, size); + + cmd = (WMI_POWERSAVE_TIMERS_POLICY_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, size); + + A_MEMCPY(cmd, pCmd, size); + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_POWERSAVE_TIMERS_POLICY_CMDID, + NO_SYNC_WMIFLAG)); +} + +#ifdef CONFIG_HOST_GPIO_SUPPORT +/* Send a command to Target to change GPIO output pins. */ +A_STATUS +wmi_gpio_output_set(struct wmi_t *wmip, + A_UINT32 set_mask, + A_UINT32 clear_mask, + A_UINT32 enable_mask, + A_UINT32 disable_mask) +{ + void *osbuf; + WMIX_GPIO_OUTPUT_SET_CMD *output_set; + int size; + + size = sizeof(*output_set); + + A_DPRINTF(DBG_WMI, + (DBGFMT "Enter - set=0x%x clear=0x%x enb=0x%x dis=0x%x\n", DBGARG, + set_mask, clear_mask, enable_mask, disable_mask)); + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + A_NETBUF_PUT(osbuf, size); + output_set = (WMIX_GPIO_OUTPUT_SET_CMD *)(A_NETBUF_DATA(osbuf)); + + output_set->set_mask = set_mask; + output_set->clear_mask = clear_mask; + output_set->enable_mask = enable_mask; + output_set->disable_mask = disable_mask; + + return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_OUTPUT_SET_CMDID, + NO_SYNC_WMIFLAG)); +} + +/* Send a command to the Target requesting state of the GPIO input pins */ +A_STATUS +wmi_gpio_input_get(struct wmi_t *wmip) +{ + void *osbuf; + + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + osbuf = A_NETBUF_ALLOC(0); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_INPUT_GET_CMDID, + NO_SYNC_WMIFLAG)); +} + +/* Send a command to the Target that changes the value of a GPIO register. */ +A_STATUS +wmi_gpio_register_set(struct wmi_t *wmip, + A_UINT32 gpioreg_id, + A_UINT32 value) +{ + void *osbuf; + WMIX_GPIO_REGISTER_SET_CMD *register_set; + int size; + + size = sizeof(*register_set); + + A_DPRINTF(DBG_WMI, + (DBGFMT "Enter - reg=%d value=0x%x\n", DBGARG, gpioreg_id, value)); + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + A_NETBUF_PUT(osbuf, size); + register_set = (WMIX_GPIO_REGISTER_SET_CMD *)(A_NETBUF_DATA(osbuf)); + + register_set->gpioreg_id = gpioreg_id; + register_set->value = value; + + return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_REGISTER_SET_CMDID, + NO_SYNC_WMIFLAG)); +} + +/* Send a command to the Target to fetch the value of a GPIO register. */ +A_STATUS +wmi_gpio_register_get(struct wmi_t *wmip, + A_UINT32 gpioreg_id) +{ + void *osbuf; + WMIX_GPIO_REGISTER_GET_CMD *register_get; + int size; + + size = sizeof(*register_get); + + A_DPRINTF(DBG_WMI, (DBGFMT "Enter - reg=%d\n", DBGARG, gpioreg_id)); + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + A_NETBUF_PUT(osbuf, size); + register_get = (WMIX_GPIO_REGISTER_GET_CMD *)(A_NETBUF_DATA(osbuf)); + + register_get->gpioreg_id = gpioreg_id; + + return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_REGISTER_GET_CMDID, + NO_SYNC_WMIFLAG)); +} + +/* Send a command to the Target acknowledging some GPIO interrupts. */ +A_STATUS +wmi_gpio_intr_ack(struct wmi_t *wmip, + A_UINT32 ack_mask) +{ + void *osbuf; + WMIX_GPIO_INTR_ACK_CMD *intr_ack; + int size; + + size = sizeof(*intr_ack); + + A_DPRINTF(DBG_WMI, (DBGFMT "Enter ack_mask=0x%x\n", DBGARG, ack_mask)); + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + A_NETBUF_PUT(osbuf, size); + intr_ack = (WMIX_GPIO_INTR_ACK_CMD *)(A_NETBUF_DATA(osbuf)); + + intr_ack->ack_mask = ack_mask; + + return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_GPIO_INTR_ACK_CMDID, + NO_SYNC_WMIFLAG)); +} +#endif /* CONFIG_HOST_GPIO_SUPPORT */ + +A_STATUS +wmi_set_access_params_cmd(struct wmi_t *wmip, A_UINT16 txop, A_UINT8 eCWmin, + A_UINT8 eCWmax, A_UINT8 aifsn) +{ + void *osbuf; + WMI_SET_ACCESS_PARAMS_CMD *cmd; + + if ((eCWmin > WMI_MAX_CW_ACPARAM) || (eCWmax > WMI_MAX_CW_ACPARAM) || + (aifsn > WMI_MAX_AIFSN_ACPARAM)) + { + return A_EINVAL; + } + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_ACCESS_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); + cmd->txop = txop; + cmd->eCWmin = eCWmin; + cmd->eCWmax = eCWmax; + cmd->aifsn = aifsn; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_ACCESS_PARAMS_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_retry_limits_cmd(struct wmi_t *wmip, A_UINT8 frameType, + A_UINT8 trafficClass, A_UINT8 maxRetries, + A_UINT8 enableNotify) +{ + void *osbuf; + WMI_SET_RETRY_LIMITS_CMD *cmd; + + if ((frameType != MGMT_FRAMETYPE) && (frameType != CONTROL_FRAMETYPE) && + (frameType != DATA_FRAMETYPE)) + { + return A_EINVAL; + } + + if (maxRetries > WMI_MAX_RETRIES) { + return A_EINVAL; + } + + if (frameType != DATA_FRAMETYPE) { + trafficClass = 0; + } + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_RETRY_LIMITS_CMD *)(A_NETBUF_DATA(osbuf)); + cmd->frameType = frameType; + cmd->trafficClass = trafficClass; + cmd->maxRetries = maxRetries; + cmd->enableNotify = enableNotify; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_RETRY_LIMITS_CMDID, + NO_SYNC_WMIFLAG)); +} + +void +wmi_get_current_bssid(struct wmi_t *wmip, A_UINT8 *bssid) +{ + if (bssid != NULL) { + A_MEMCPY(bssid, wmip->wmi_bssid, ATH_MAC_LEN); + } +} + +A_STATUS +wmi_set_opt_mode_cmd(struct wmi_t *wmip, A_UINT8 optMode) +{ + void *osbuf; + WMI_SET_OPT_MODE_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_OPT_MODE_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->optMode = optMode; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_OPT_MODE_CMDID, + SYNC_BOTH_WMIFLAG)); +} + +A_STATUS +wmi_opt_tx_frame_cmd(struct wmi_t *wmip, + A_UINT8 frmType, + A_UINT8 *dstMacAddr, + A_UINT8 *bssid, + A_UINT16 optIEDataLen, + A_UINT8 *optIEData) +{ + void *osbuf; + WMI_OPT_TX_FRAME_CMD *cmd; + osbuf = A_NETBUF_ALLOC(optIEDataLen + sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, (optIEDataLen + sizeof(*cmd))); + + cmd = (WMI_OPT_TX_FRAME_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, (optIEDataLen + sizeof(*cmd)-1)); + + cmd->frmType = frmType; + cmd->optIEDataLen = optIEDataLen; + //cmd->optIEData = (A_UINT8 *)((int)cmd + sizeof(*cmd)); + A_MEMCPY(cmd->bssid, bssid, sizeof(cmd->bssid)); + A_MEMCPY(cmd->dstAddr, dstMacAddr, sizeof(cmd->dstAddr)); + A_MEMCPY(&cmd->optIEData[0], optIEData, optIEDataLen); + + return (wmi_cmd_send(wmip, osbuf, WMI_OPT_TX_FRAME_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_adhoc_bconIntvl_cmd(struct wmi_t *wmip, A_UINT16 intvl) +{ + void *osbuf; + WMI_BEACON_INT_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_BEACON_INT_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->beaconInterval = intvl; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_BEACON_INT_CMDID, + NO_SYNC_WMIFLAG)); +} + + +A_STATUS +wmi_set_voice_pkt_size_cmd(struct wmi_t *wmip, A_UINT16 voicePktSize) +{ + void *osbuf; + WMI_SET_VOICE_PKT_SIZE_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_VOICE_PKT_SIZE_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->voicePktSize = voicePktSize; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_VOICE_PKT_SIZE_CMDID, + NO_SYNC_WMIFLAG)); +} + + +A_STATUS +wmi_set_max_sp_len_cmd(struct wmi_t *wmip, A_UINT8 maxSPLen) +{ + void *osbuf; + WMI_SET_MAX_SP_LEN_CMD *cmd; + + /* maxSPLen is a two-bit value. If user trys to set anything + * other than this, then its invalid + */ + if(maxSPLen & ~0x03) + return A_EINVAL; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_MAX_SP_LEN_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->maxSPLen = maxSPLen; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_MAX_SP_LEN_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_UINT8 +convert_userPriority_to_trafficClass(A_UINT8 userPriority) +{ + return (up_to_ac[userPriority & 0x7]); +} + +A_UINT8 +wmi_get_power_mode_cmd(struct wmi_t *wmip) +{ + return wmip->wmi_powerMode; +} + +A_STATUS +wmi_verify_tspec_params(WMI_CREATE_PSTREAM_CMD *pCmd, A_BOOL tspecCompliance) +{ + return A_OK; +} + +#ifdef CONFIG_HOST_TCMD_SUPPORT +static A_STATUS +wmi_tcmd_test_report_rx(struct wmi_t *wmip, A_UINT8 *datap, int len) +{ + + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + A_WMI_TCMD_RX_REPORT_EVENT(wmip->wmi_devt, datap, len); + + return A_OK; +} + +#endif /* CONFIG_HOST_TCMD_SUPPORT*/ + +A_STATUS +wmi_set_authmode_cmd(struct wmi_t *wmip, A_UINT8 mode) +{ + void *osbuf; + WMI_SET_AUTH_MODE_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_AUTH_MODE_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->mode = mode; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_AUTH_MODE_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_reassocmode_cmd(struct wmi_t *wmip, A_UINT8 mode) +{ + void *osbuf; + WMI_SET_REASSOC_MODE_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_REASSOC_MODE_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->mode = mode; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_REASSOC_MODE_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_lpreamble_cmd(struct wmi_t *wmip, A_UINT8 status) +{ + void *osbuf; + WMI_SET_LPREAMBLE_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_LPREAMBLE_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->status = status; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_LPREAMBLE_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_rts_cmd(struct wmi_t *wmip, A_UINT16 threshold) +{ + void *osbuf; + WMI_SET_RTS_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_RTS_CMD*)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->threshold = threshold; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_RTS_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_wmm_cmd(struct wmi_t *wmip, WMI_WMM_STATUS status) +{ + void *osbuf; + WMI_SET_WMM_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_WMM_CMD*)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->status = status; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_WMM_CMDID, + NO_SYNC_WMIFLAG)); + +} + +A_STATUS +wmi_set_wmm_txop(struct wmi_t *wmip, WMI_TXOP_CFG cfg) +{ + void *osbuf; + WMI_SET_WMM_TXOP_CMD *cmd; + + if( !((cfg == WMI_TXOP_DISABLED) || (cfg == WMI_TXOP_ENABLED)) ) + return A_EINVAL; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_WMM_TXOP_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->txopEnable = cfg; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_WMM_TXOP_CMDID, + NO_SYNC_WMIFLAG)); + +} + +#ifdef CONFIG_HOST_TCMD_SUPPORT +/* WMI layer doesn't need to know the data type of the test cmd. + This would be beneficial for customers like Qualcomm, who might + have different test command requirements from differnt manufacturers + */ +A_STATUS +wmi_test_cmd(struct wmi_t *wmip, A_UINT8 *buf, A_UINT32 len) +{ + void *osbuf; + char *data; + + A_DPRINTF(DBG_WMI, (DBGFMT "Enter\n", DBGARG)); + + osbuf= A_NETBUF_ALLOC(len); + if(osbuf == NULL) + { + return A_NO_MEMORY; + } + A_NETBUF_PUT(osbuf, len); + data = A_NETBUF_DATA(osbuf); + A_MEMCPY(data, buf, len); + + return(wmi_cmd_send(wmip, osbuf, WMI_TEST_CMDID, + NO_SYNC_WMIFLAG)); +} + +#endif + +A_STATUS +wmi_set_bt_status_cmd(struct wmi_t *wmip, A_UINT8 streamType, A_UINT8 status) +{ + void *osbuf; + WMI_SET_BT_STATUS_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_BT_STATUS_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->streamType = streamType; + cmd->status = status; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_BT_STATUS_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_bt_params_cmd(struct wmi_t *wmip, WMI_SET_BT_PARAMS_CMD* cmd) +{ + void *osbuf; + WMI_SET_BT_PARAMS_CMD* alloc_cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + alloc_cmd = (WMI_SET_BT_PARAMS_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(alloc_cmd, sizeof(*cmd)); + A_MEMCPY(alloc_cmd, cmd, sizeof(*cmd)); + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_BT_PARAMS_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_get_keepalive_configured(struct wmi_t *wmip) +{ + void *osbuf; + WMI_GET_KEEPALIVE_CMD *cmd; + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + cmd = (WMI_GET_KEEPALIVE_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + return (wmi_cmd_send(wmip, osbuf, WMI_GET_KEEPALIVE_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_UINT8 +wmi_get_keepalive_cmd(struct wmi_t *wmip) +{ + return wmip->wmi_keepaliveInterval; +} + +A_STATUS +wmi_set_keepalive_cmd(struct wmi_t *wmip, A_UINT8 keepaliveInterval) +{ + void *osbuf; + WMI_SET_KEEPALIVE_CMD *cmd; + + osbuf = A_NETBUF_ALLOC(sizeof(*cmd)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*cmd)); + + cmd = (WMI_SET_KEEPALIVE_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, sizeof(*cmd)); + cmd->keepaliveInterval = keepaliveInterval; + wmip->wmi_keepaliveInterval = keepaliveInterval; + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_KEEPALIVE_CMDID, + NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_appie_cmd(struct wmi_t *wmip, A_UINT8 mgmtFrmType, A_UINT8 ieLen, + A_UINT8 *ieInfo) +{ + void *osbuf; + WMI_SET_APPIE_CMD *cmd; + A_UINT16 cmdLen; + + if (ieLen > WMI_MAX_IE_LEN) { + return A_ERROR; + } + cmdLen = sizeof(*cmd) + ieLen - 1; + osbuf = A_NETBUF_ALLOC(cmdLen); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, cmdLen); + + cmd = (WMI_SET_APPIE_CMD *)(A_NETBUF_DATA(osbuf)); + A_MEMZERO(cmd, cmdLen); + + cmd->mgmtFrmType = mgmtFrmType; + cmd->ieLen = ieLen; + A_MEMCPY(cmd->ieInfo, ieInfo, ieLen); + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_APPIE_CMDID, NO_SYNC_WMIFLAG)); +} + +A_STATUS +wmi_set_halparam_cmd(struct wmi_t *wmip, A_UINT8 *cmd, A_UINT16 dataLen) +{ + void *osbuf; + A_UINT8 *data; + + osbuf = A_NETBUF_ALLOC(dataLen); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, dataLen); + + data = A_NETBUF_DATA(osbuf); + + A_MEMCPY(data, cmd, dataLen); + + return (wmi_cmd_send(wmip, osbuf, WMI_SET_WHALPARAM_CMDID, NO_SYNC_WMIFLAG)); +} + +A_INT32 +wmi_get_rate(A_INT8 rateindex) +{ + if (rateindex == RATE_AUTO) { + return 0; + } else { + return(wmi_rateTable[(A_UINT32) rateindex]); + } +} + +void +wmi_node_return (struct wmi_t *wmip, bss_t *bss) +{ + if (NULL != bss) + { + wlan_node_return (&wmip->wmi_scan_table, bss); + } +} + +bss_t * +wmi_find_Ssidnode (struct wmi_t *wmip, A_UCHAR *pSsid, + A_UINT32 ssidLength, A_BOOL bIsWPA2) +{ + bss_t *node = NULL; + node = wlan_find_Ssidnode (&wmip->wmi_scan_table, pSsid, + ssidLength, bIsWPA2); + return node; +} + +void +wmi_free_allnodes(struct wmi_t *wmip) +{ + wlan_free_allnodes(&wmip->wmi_scan_table); +} + +bss_t * +wmi_find_node(struct wmi_t *wmip, const A_UINT8 *macaddr) +{ + bss_t *ni=NULL; + ni=wlan_find_node(&wmip->wmi_scan_table,macaddr); + return ni; +} + +A_STATUS +wmi_dset_open_reply(struct wmi_t *wmip, + A_UINT32 status, + A_UINT32 access_cookie, + A_UINT32 dset_size, + A_UINT32 dset_version, + A_UINT32 targ_handle, + A_UINT32 targ_reply_fn, + A_UINT32 targ_reply_arg) +{ + void *osbuf; + WMIX_DSETOPEN_REPLY_CMD *open_reply; + + A_DPRINTF(DBG_WMI, (DBGFMT "Enter - wmip=0x%x\n", DBGARG, (int)wmip)); + + osbuf = A_NETBUF_ALLOC(sizeof(*open_reply)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + A_NETBUF_PUT(osbuf, sizeof(*open_reply)); + open_reply = (WMIX_DSETOPEN_REPLY_CMD *)(A_NETBUF_DATA(osbuf)); + + open_reply->status = status; + open_reply->targ_dset_handle = targ_handle; + open_reply->targ_reply_fn = targ_reply_fn; + open_reply->targ_reply_arg = targ_reply_arg; + open_reply->access_cookie = access_cookie; + open_reply->size = dset_size; + open_reply->version = dset_version; + + return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DSETOPEN_REPLY_CMDID, + NO_SYNC_WMIFLAG)); +} + +static A_STATUS +wmi_get_pmkid_list_event_rx(struct wmi_t *wmip, A_UINT8 *datap, A_UINT32 len) +{ + WMI_PMKID_LIST_REPLY *reply; + A_UINT32 expected_len; + + if (len < sizeof(WMI_PMKID_LIST_REPLY)) { + return A_EINVAL; + } + reply = (WMI_PMKID_LIST_REPLY *)datap; + expected_len = sizeof(reply->numPMKID) + reply->numPMKID * WMI_PMKID_LEN; + + if (len < expected_len) { + return A_EINVAL; + } + + A_WMI_PMKID_LIST_EVENT(wmip->wmi_devt, reply->numPMKID, + reply->pmkidList); + + return A_OK; +} + +#ifdef CONFIG_HOST_DSET_SUPPORT +A_STATUS +wmi_dset_data_reply(struct wmi_t *wmip, + A_UINT32 status, + A_UINT8 *user_buf, + A_UINT32 length, + A_UINT32 targ_buf, + A_UINT32 targ_reply_fn, + A_UINT32 targ_reply_arg) +{ + void *osbuf; + WMIX_DSETDATA_REPLY_CMD *data_reply; + int size; + + size = sizeof(*data_reply) + length; + + A_DPRINTF(DBG_WMI, + (DBGFMT "Enter - length=%d status=%d\n", DBGARG, length, status)); + + osbuf = A_NETBUF_ALLOC(size); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + A_NETBUF_PUT(osbuf, size); + data_reply = (WMIX_DSETDATA_REPLY_CMD *)(A_NETBUF_DATA(osbuf)); + + data_reply->status = status; + data_reply->targ_buf = targ_buf; + data_reply->targ_reply_fn = targ_reply_fn; + data_reply->targ_reply_arg = targ_reply_arg; + data_reply->length = length; + + if (status == A_OK) { + if (a_copy_from_user(data_reply->buf, user_buf, length)) { + return A_ERROR; + } + } + + return (wmi_cmd_send_xtnd(wmip, osbuf, WMIX_DSETDATA_REPLY_CMDID, + NO_SYNC_WMIFLAG)); +} +#endif /* CONFIG_HOST_DSET_SUPPORT */ + +A_STATUS +wmi_set_wsc_status_cmd(struct wmi_t *wmip, A_UINT32 status) +{ + void *osbuf; + char *cmd; + + wps_enable = status; + + osbuf = a_netbuf_alloc(sizeof(1)); + if (osbuf == NULL) { + return A_NO_MEMORY; + } + + a_netbuf_put(osbuf, sizeof(1)); + + cmd = (char *)(a_netbuf_to_data(osbuf)); + + A_MEMZERO(cmd, sizeof(*cmd)); + cmd[0] = (status?1:0); + return (wmi_cmd_send(wmip, osbuf, WMI_SET_WSC_STATUS_CMDID, + NO_SYNC_WMIFLAG)); +} + diff --git a/drivers/ar6000/wmi/wmi_doc.h b/drivers/ar6000/wmi/wmi_doc.h new file mode 100644 index 00000000000..19cd9386cab --- /dev/null +++ b/drivers/ar6000/wmi/wmi_doc.h @@ -0,0 +1,4421 @@ +/* + * + * Copyright (c) 2004-2007 Atheros Communications Inc. + * All rights reserved. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + + +#if 0 +Wireless Module Interface (WMI) Documentaion + + This section describes the format and the usage model for WMI control and + data messages between the host and the AR6000-based targets. The header + file include/wmi.h contains all command and event manifest constants as + well as structure typedefs for each set of command and reply parameters. + +Data Frames + + The data payload transmitted and received by the target follows RFC-1042 + encapsulation and thus starts with an 802.2-style LLC-SNAP header. The + WLAN module completes 802.11 encapsulation of the payload, including the + MAC header, FCS, and WLAN security related fields. At the interface to the + message transport (HTC), a data frame is encapsulated in a WMI message. + +WMI Message Structure + + The WMI protocol leverages an 802.3-style Ethernet header in communicating + the source and destination information between the host and the AR6000 + modules using a 14-byte 802.3 header ahead of the 802.2-style payload. In + addition, the WMI protocol adds a header to all data messages: + + { + INT8 rssi + The RSSI of the received packet and its units are shown in db above the + noise floor, and the noise floor is shown in dbm. + UINT8 info + Contains information on message type and user priority. Message type + differentiates between a data packet and a synchronization message. + } WMI_DATA_HDR + + User priority contains the 802.1d user priority info from host to target. Host + software translates the host Ethernet format to 802.3 format prior to Tx and + 802.3 format to host format in the Rx direction. The host does not transmit the + FCS that follows the data. MsgType differentiates between a regular data + packet (msgType=0) and a synchronization message (msgType=1). + +Data Endpoints + + The AR6000 chipset provides several data endpoints to support quality of + service (QoS) and maintains separate queues and separate DMA engines for + each data endpoint. A data endpoint can be bi-directional. + + Best effort (BE) class traffic uses the default data endpoint (2). The host can + establish up to two additional data endpoints for other traffic classes. Once + such a data endpoint is established, it sends and receives corresponding QoS + traffic in a manner similar to the default data endpoint. + + If QoS is desired over the interconnect, host software must classify each data + packet and place it on the appropriate data endpoint. The information + required to classify data is generally available in-band as an 802.1p/q style + tag or as the ToS field in the IP header. The information may also be available + out-of-band depending on the host DDI. + +Connection States + + Table B-1 describes the AR6000 WLAN connection states: + + Table B-1. AR6000 Connection States + +Connection State + Description + + DISCONNECTED + In this state, the AR6000 device is not connected to a wireless + network. The device is in this state after reset when it sends the + WIRELESS MODULE “READY” EVENT, after it processes a + DISCONNECT command, and when it loses its link with the + access point (AP) that it was connected to. The device signals a + transition to the DISCONNECTED state with a “DISCONNECT” + event. + +CONNECTED + In this state, the AR6000 device is connected to wireless networks. + The device enters this state after successfully processing a + CONNECT, which establishes a connection with a wireless + network. The device signals a transition to the CONNECTED state + with a “CONNECT” event. + + +Message Types + + WMI uses commands, replies, and events for the control and configuration of + the AR6000 device. The control protocol is asynchronous. Table B-2 describes + AR6000 message types: + +Table B-2. AR6000 Message Types + +Message Type + Description + +Commands + Control messages that flow from the host to the device + +Replies/Events + Control messages that flow from the device to the host. + + The device issues a reply to some WMI commands, but not to others. + The payload in a reply is command-specific, and some commands do + not trigger a reply message at all. Events are control messages issued + by the device to signal the occurrence of an asynchronous event. + + +WMI Message Format + + All WMI control commands, replies and events use the header format: + + WMI_CMD_HDR Header Format + { + UINT16 id + This 16-bit constant identifies which WMI command the host is issuing, + which command the target is replying to, or which event has occurred. + WMI_CMD_HDR + } + + + A variable-size command-, reply-, or event-specific payload follows the + header. Over the interconnect, all fields in control messages (including + WMI_CMD_HDR and the command specific payload) use 32-bit little Endian + byte ordering and fields are packed. The AR6000 device always executes + commands in order, and the host may send multiple commands without + waiting for previous commands to complete. A majority of commands are + processed to completion once received. Other commands trigger a longer + duration activity whose completion is signaled to the host through an event. + +Command Restrictions + + Some commands may only be issued when the AR6000 device is in a certain + state. The host is required to wait for an event signaling a state transition + before such a command can be issued. For example, if a command requires + the device to be in the CONNECTED state, then the host is required to wait + for a “CONNECT” event before it issues that command. + + The device ignores any commands inappropriate for its current state. If the + command triggers a reply, the device generates an error reply. Otherwise, the + device silently ignores the inappropriate command. + +Command and Data Synchronization + + WMI provides a mechanism for a host to advise the device of necessary + synchronization between commands and data. The device implements + synchronization; no implicit synchronization exists between endpoints. + + The host controls synchronization using the “SYNCHRONIZE” command + over the control channel and synchronization messages over data channels. + The device stops each data channel upon receiving a synchronization message + on that channel, processing all data packets received prior to that message. + After the device receives synchronization messages for each data endpoint + and the “SYNCHRONIZE” command, it resumes all channels. + + When the host must guarantee a command executes before processing new + data packets, it first issues the command, then issues the “SYNCHRONIZE” + command and sends synchronization messages on data channels. When the + host must guarantee the device has processed all old data packets before a + processing a new command, it issues a “SYNCHRONIZE” command and + synchronization messages on all data channels, then issues the desired + command. + + + +WMI Commands + + ADD_BAD_AP + Cause the AR6000 device to avoid a particular AP + ADD_CIPHER_KEY + Add or replace any of the four AR6000 encryption keys + ADD_WOW_PATTERN + Used to add a pattern to the WoW pattern list + CLR_RSSI_SNR + Clear the current calculated RSSI and SNR value + CONNECT_CMD + Request that the AR6000 device establish a wireless connection + with the specified SSID + CREATE_PSTREAM + Create prioritized data endpoint between the host and device + DELETE_BAD_AP + Clear an entry in the bad AP table + DELETE_CIPHER_KEY + Delete a previously added cipher key + DELETE_PSTREAM + Delete a prioritized data endpoint + DELETE_WOW_PATTERN + Remove a pre-specified pattern from the WoW pattern list + EXTENSION + WMI message interface command + GET_BIT_RATE + Retrieve rate most recently used by the AR6000 + GET_CHANNEL_LIST + Retrieve list of channels used by the AR6000 + GET_FIXRATES + Retrieves the rate-mask set via the SET_FIXRATES command. + GET_PMKID_LIST_CMD + Retrieve the firmware list of PMKIDs + GET_ROAM_DATA + Internal use for data collection; available in special build only + GET_ROAM_TBL + Retrieve the roaming table maintained on the target + GET_TARGET_STATS + Request that the target send the statistics it maintains + GET_TX_PWR + Retrieve the current AR6000 device Tx power levels + GET_WOW_LIST + Retrieve the current list of WoW patterns + LQ_THRESHOLD_PARAMS + Set the link quality thresholds + OPT_TX_FRAME + Send a special frame (special feature) + RECONNECT + Request a reconnection to a BSS + RSSI_THRESHOLD_PARAMS + Configure how the AR6000 device monitors and reports signal + strength (RSSI) of the connected BSS + SCAN_PARAMS + Determine dwell time and changes scanned channels + SET_ACCESS_PARAMS + Set access parameters for the wireless network + SET_ADHOC_BSSID + Set the BSSID for an ad hoc network + SET_AKMP_PARAMS + Set multiPMKID mode + SET_APPIE + Add application-specified IE to a management frame + SET_ASSOC_INFO + Specify the IEs the device should add to association or + reassociation requests + SET_AUTH_MODE + Set 802.11 authentication mode of reconnection + SET_BEACON_INT + Set the beacon interval for an ad hoc network + SET_BIT_RATE + Set the AR6000 to a specific fixed bit rate + SET_BMISS_TIME + Set the beacon miss time + SET_BSS_FILTER + Inform the AR6000 of network types about which it wants to + receive information using a “BSSINFO” event + SET_BT_PARAMS + Set the status of a Bluetooth stream (SCO or A2DP) or set + Bluetooth coexistence register parameters + SET_BT_STATUS + Set the status of a Bluetooth stream (SCO or A2DP) + SET_CHANNEL_PARAMETERS + Configure WLAN channel parameters + SET_DISC_TIMEOUT + Set the amount of time the AR6000 spends attempting to + reestablish a connection + SET_FIXRATES + Set the device to a specific fixed PHY rate (supported subset) + SET_HALPARAM + Internal AR6000 command to set certain hardware parameters + SET_HOST_SLEEP_MODE + Set the host mode to asleep or awake + SET_IBSS_PM_CAPS + Support a non-standard power management scheme for an + ad hoc network + SET_LISTEN_INT + Request a listen interval + SET_LPREAMBLE + Override the short preamble capability of the AR6000 device + SET_MAX_SP_LEN + Set the maximum service period + SET_OPT_MODE + Set the special mode on/off (special feature) + SET_PMKID + Set the pairwise master key ID (PMKID) + SET_PMKID_LIST_CMD + Configure the firmware list of PMKIDs + SET_POWER_MODE + Set guidelines on trade-off between power utilization + SET_POWER_PARAMS + Configure power parameters + SET_POWERSAVE_PARAMS + Set the two AR6000 power save timers + SET_PROBED_SSID + Provide list of SSIDs the device should seek + SET_REASSOC_MODE + Specify whether the disassociated frame should be sent upon + reassociation + SET_RETRY_LIMITS + Limit how many times the device tries to send a frame + SET_ROAM_CTRL + Control roaming behavior + SET_RTS + Determine when RTS should be sent + SET_SCAN_PARAMS + Set the AR6000 scan parameters + SET_TKIP_COUNTERMEASURES + Enable/disable reports of TKIP MIC errors + SET_TX_PWR + Specify the AR6000 device Tx power levels + SET_VOICE_PKT_SIZE + Set voice packet size + SET_WMM + Override the AR6000 WMM capability + SET_WMM_TXOP + Configure TxOP bursting when sending traffic to a WMM- + capable AP + SET_WOW_MODE + Enable/disable WoW mode + SET_WSC_STATUS + Enable/disable profile check in cserv when the WPS protocol + is in progress + SNR_THRESHOLD_PARAMS + Configure how the device monitors and reports SNR of BSS + START_SCAN + Start a long or short channel scan + SYNCHRONIZE + Force a synchronization point between command and data + paths + TARGET_REPORT_ERROR_BITMASK + Control “ERROR_REPORT” events from the AR6000 + + + + +Name + ADD_BAD_AP + +Synopsis + The host uses this command to cause the AR6000 to avoid a particular AP. The + AR6000 maintain a table with up to two APs to avoid. An ADD_BAD_AP command + adds or replaces the specified entry in this bad AP table. + + If the AR6000 are currently connected to the AP specified in this command, they + disassociate. + +Command + wmiconfig eth1 --badap <bssid> <badApIndex> + +Command Parameters + UINT8 badApIndex Index [0...1] that identifies which entry in the + bad AP table to use + + + UINT8 bssid[6] MAC address of the AP to avoid + +Command Values + badApIndex = 0, 1 Entry in the bad AP table to use + +Reset Value + The bad AP table is cleared + +Restrictions + None + +See Also + “DELETE_BAD_AP” on page B-13 + +===================================================================== +Name + ADD_CIPHER_KEY + +Synopsis + The host uses this command to add/replace any of four encryption keys on the + AR6000. The ADD_CIPHER_KEY command is issued after the CONNECT event + has been received by the host for all dot11Auth modes except for SHARED_AUTH. + When the dot11AuthMode is SHARED_AUTH, then the ADD_CIPHER_KEY + command should be issued before the “CONNECT” command. + +Command + wmiconfig eth1 --cipherkey <keyIndex> <keyType> <keyUsage> + <keyLength> <keyopctrl> <keyRSC> <key> + +Command Parameters + UINT8 keyIndex Index (0...3) of the key to add/replace; + uniquely identifies the key + UINT8 keyType CRYPTO_TYPE + UINT8 keyUsage Specifies usage parameters of the key when + keyType = WEP_CRYPT + UINT8 keyLength Length of the key in bytes + UINT8 keyOpCtrl bit[0] = Initialize TSC (default), + bit[1] = Initialize RSC + UINT8 keyRSC[8] Key replay sequence counter (RSC) initial + value the device should use + UINT8 key[32] Key material used for this connection + Command Values + { + NONE_CRYPT = 1 + WEP_CRYPT = 2 + TKIP_CRYPT = 3 + AES_CRYPT = 4 + KEY_OP_INIT_TSC 0x01 + KEY_OP_INIT_RSC 0x02 + KEY_OP_INIT_VAL 0x03 + Default is to Initialize the TSC + KEY_OP_VALID_MASK 0x04 + Two operations defined + } CRYPTO_TYPE + + { + PAIRWISE_USAGE = 0 Set if the key is used for unicast traffic only + GROUP_USAGE = 1 Set if the key is used to receive multicast + traffic (also set for static WEP keys) + TX_USAGE = 2 Set for the GROUP key used to transmit frames + All others are reserved + } KEY_USAGE + +Reset Value + The four available keys are disabled. + +Restrictions + The cipher should correspond to the encryption mode specified in the “CONNECT” + command. + +See Also + “DELETE_CIPHER_KEY” + +===================================================================== + + +Name + ADD_WOW_PATTERN + +Synopsis + The host uses this command to add a pattern to the WoW pattern list; used for + pattern-matching for host wakeups by the WoW module. If the host mode is asleep + and WoW is enabled, all packets are matched against the existing WoW patterns. If a + packet matches any of the patterns specified, the target will wake up the host. All + non-matching packets are discarded by the target without being sent up to the host. + +Command + wmiconfig –addwowpattern <list-id> <filter-size> <filter-offset> + <pattern> <mask> + +Command Parameters + A_UINT8 filter_list_id ID of the list that is to include the new pattern + A_UINT8 filter_size Size of the new pattern + A_UINT8 filter_offset Offset at which the pattern matching for this + new pattern should begin at + A_UINT8 filter[1] Byte stream that contains both the pattern and + the mask of the new WoW wake-up pattern + +Reply Parameters + None + +Reset Value + None defined (default host mode is awake) + +Restrictions + None + +See Also + “DELETE_WOW_PATTERN” + +===================================================================== + + +Name + CLR_RSSI_SNR + +Synopsis + Clears the current calculated RSSI and SNR value. RSSI and SNR are reported by + running-average value. This command will clear the history and have a fresh start + for the running-average mechanism. + +Command + wmiconfig eth1 --cleanRssiSnr + +Command Parameters + None + +Reply Parameters + None + +Reset Value + None defined + +Restrictions + None + +===================================================================== + +Name + CONNECT_CMD + +Synopsis + New connect control information (connectCtrl) is added, with 32 possible modifiers. + + CONNECT_SEND_REASSOC + Valid only for a host-controlled connection to a + particular AP. If this bit is set, a reassociation frame is + sent. If this bit is clear, an association request frame is + sent to the AP. + + CONNECT_IGNORE_WPAx_GROUP_CIPHER + No group key is issued in the CONNECT command, + so use the group key advertised by the AP. In a target- + initiated roaming situation this allows a STA to roam + between APs that support different multicast ciphers. + + CONNECT_PROFILE_MATCH_DONE + In a host-controlled connection case, it is possible that + during connect, firmware may not have the + information for a profile match (e.g, when the AP + supports hidden SSIDs and the device may not + transmit probe requests during connect). By setting + this bit in the connection control information, the + firmware waits for a beacon from the AP with the + BSSID supplied in the CONNECT command. No + additional profile checks are done. + + CONNECT_IGNORE_AAC_BEACON + Ignore the Admission Capacity information in the + beacon of the AP + + CONNECT_ASSOC_POLICY_USER + When set, the CONNECT_SEND_REASSOC setting + determines if an Assoc or Reassoc is sent to an AP + +Command + wmiconfig --setconnectctrl <ctrl flags bitmask> + +Command Parameters + typedef struct{ + A_UINT8 networktype; + A_UINT8 dot11authmode; + A_UINT8 authmode; + A_UINT8 pairwiseCryptoType; /*CRYPTO_TYPE*/ + A_UINT8 pairwiseCryptoLen; + A_UINT8 groupCryptoType; /*CRYPTO_TYPE*/ + A_UINT8 groupCryptoLen; + A_UINT8 ssidLength; + A_UCHAR ssid[WMI_MAX_SSID_LEN]; + A_UINT16 channel; + A_UINT8 bssid[AUTH_MAC_LEN]; + A_UINT8 ctrl_flags; /*WMI_CONNECT_CTRL_FLAGS_BITS*/ + } WMI_CONNECT_CMD; + + ctrl flags bitmask + = 0x0001 CONNECT_ASSOC_POLICY_USER + Assoc frames are sent using the policy specified by + the flag + = 0x0002 CONNECT_SEND_REASSOC + Send Reassoc frame while connecting, otherwise send + assoc frames + = 0x0004 CONNECT_IGNORE_WPAx_GROUP_CIPHER + Ignore WPAx group cipher for WPA/WPA2 + = 0x0008 CONNECT_PROFILE_MATCH_DONE + Ignore any profile check + = 0x0010 CONNECT_IGNORE_AAC_BEACON + Ignore the admission control information in the + beacon + ... CONNECT_CMD, continued + Command Values + typedef enum { + INFRA_NETWORK = 0x01, + ADHOC_NETWORK = 0x02, + ADHOC_CREATOR = 0x04, + } NETWORK_TYPE; + + typedef enum { + OPEN_AUTH = 0x01, + SHARED_AUTH = 0x02, + LEAP_AUTH = 0x04, + } DOT11_AUTH_MODE; + typedef enum { + NONE_AUTH = 0x01, + WPA_AUTH = 0x02, + WPA_PSK_AUTH = 0x03, + WPA2_AUTH = 0x04, + WPA2_PSK_AUTH = 0x05, + WPA_AUTH_CCKM = 0x06, + WPA2_AUTH_CCKM = 0x07, + } AUTH_MODE; + typedef enum { + NONE_CRYPT = 0x01, + WEP_CRYPT = 0x02, + TKIP_CRYPT = 0x03, + AES_CRYPT = 0x04, + } CRYPTO_TYPE; + typedef enum { + CONNECT_ASSOC_POLICY_USER = 0x0001, + CONNECT_SEND_REASSOC = 0x0002, + CONNECT_IGNORE_WPAx_GROUP_CIPHER = 0x0004, + CONNECT_PROFILE_MATCH_DONE = 0x0008, + CONNECT_IGNORE_AAC_BEACON = 0x0010, + } WMI_CONNECT_CTRL_FLAGS_BITS; + + pairwiseCryptoLen and groupCryptoLen are valid when the respective + CryptoTypesis WEP_CRYPT, otherwise this value should be 0. This is the length in + bytes. + +Reset Value + None defined + +Restrictions + None + +===================================================================== + + +Name + CREATE_PSTREAM + +Synopsis + The host uses this command to create a new prioritized data endpoint between the + host and the AR6000 device that carries a prioritized stream of data. If the AP that the + device connects to requires TSPEC stream establishment, the device requests the + corresponding TSPEC with the AP. The maximum and minimum service interval + ranges from 0 – 0x7FFFFFFF (ms), where 0 = disabled. The device does not send a + reply event for this command, as it is always assumed the command has succeeded. + An AP admission control response comes to the host via a WMI_CAC_INDICATION + event, once the response for the ADDTS frame comes. + + Examples of cases where reassociation is generated (when WMM) and cases where + ADDTS is generated (when WMM and enabling ACM) are when: + Changing UAPSD flags in WMM mode, reassociation is generated + Changing the interval of sending auto QoS Null frame in WMM mode; + reassociation is not generated + Issuing a command with same previous parameters in WMM mode and enabling + ACM, an ADDTS request is generated + Changing the interval of a QoS null frame sending in WMM mode and enabling + ACM, an ADDTS request is generated + Issuing the command in disconnected state, reassociation or ADDTS is not + generated but the parameters are available after (re)association + +Command + --createqos <user priority> <direction> <traffic class> +<trafficType> <voice PS capability> <min service interval> <max +service interval> <inactivity interval> <suspension interval> +<service start time> <tsid> <nominal MSDU> <max MSDU> <min data +rate> <mean data rate> <peak data rate> <max burst size> <delay +bound> <min phy rate> <sba> <medium time> where: + + <user priority> + 802.1D user priority range (0–7) + <direction> + = 0 Tx (uplink) traffic + = 1 Rx (downlink) traffic + = 2 Bi-directional traffic + <traffic class> + = 1 BK + = 2 VI + = 3 VO + <trafficType> + = 0 Aperiodic + = 1 Periodic + <voice PS capability> + Specifies whether the voice power save mechanism + (APSD if AP supports it or legacy/simulated APSD + [using PS-Poll]) should be used + = 0 Disable voice power save for traffic class + = 1 Enable APSD voice power save for traffic class + = 2 Enable voice power save for all traffic classes + <min service interval> + (In ms) + <max service interval> + Inactivity interval (in ms) (0 = Infinite) + <suspension interval> + (In ms) + <service start time> + Service start time + <tsid> + TSID range (0–15) + <nominal MSDU> + Nominal MAC SDU size + <max MSDU> + Maximum MAC SDU size + <min data rate> + Minimum data rate (in bps) + <mean data rate> + Mean data rate (in bps) + <peak data rate> + Peak data rate (in bps) + <max burst size> + Maximum burst size (in bps) + <delay bound> + Delay bound + <min phy rate> + Minimum PHY rate (in bps) + <sba> + Surplus bandwidth allowance + <medium time> + Medium time in TU of 32-ms periods per sec + ... CREATE_PSTREAM (continued) + +Command Parameters + UINT8 trafficClass TRAFFIC_CLASS value + UINT8 traffic + Direction + DIR_TYPE value + UINT8 rxQueueNum + AR6000 device mailbox index (2 or 3) + corresponding to the endpoint the host + wishes to use to receive packets for the + prioritized stream + UINT8 trafficType TRAFFIC_TYPE value + UINT8 voicePS +Capability + VOICEPS_CAP_TYPE value + UINT8 tsid Traffic stream ID + UINT8 userPriority 802.1D user priority + UINT16 nominalMSDU Nominal MSDU in octets + UINT16 maxMSDU Maximum MSDU in octets + UINT32 minServiceInt Minimum service interval: the min. + period of traffic specified (in ms) + UINT32 maxServiceInt Maximum service interval: the max. + period of traffic specified (in ms) + UINT32 inactivityInt Indicates how many ms an established + stream is inactive before the prioritized + data endpoint is taken down and the + corresponding T-SPEC deleted + UINT32 suspensionInt Suspension interval (in ms) + UINT32 service StartTime Service start time + UINT32 minDataRate Minimum data rate (in bps) + UINT32 meanDataRate Mean data rate (in bps) + UINT32 peakDataRate Peak data rate (in bps) + UINT32 maxBurstSize + UINT32 delayBound + UINT32 minPhyRate Minimum PHY rate for TSPEC (in bps) + UINT32 sba Surplus bandwidth allowance + UINT32 mediumTime Medium TSPEC time (in units of 32 ms) +Command Values + { + WMM_AC_BE = 0 Best Effort + WMM_AC_BK = 1 Background + WMM_AC_VI = 2 Video + WMM_AC_VO = 3 Voice + All other values reserved + } TRAFFIC_CLASS + { + UPLINK_TRAFFIC = 0 From the AR6000 device to the AP + DOWNLINK_TRAFFIC = 1 From the AP to the AR6000 device + BIDIR_TRAFFIC = 2 Bi-directional traffic + All other values reserved + } DIR_TYPE + { + DISABLE_FOR_THIS_AC = 0 + ENABLE_FOR_THIS_AC = 1 + ENABLE_FOR_ALL_AC = 2 + All other values reserved + } VOICEPS_CAP_TYPE + + ... CREATE_PSTREAM (continued) + + + VI BE BK Supported, Y/N? + 0 0 0 0 Y + 0 0 0 1 Y + 0 0 1 0 N + 0 0 1 1 N + 0 1 0 0 Y + 0 1 0 1 Y + 0 1 1 0 N + 0 1 1 1 N + 1 0 0 0 Y + 1 0 0 1 Y + 1 0 1 0 N + 1 1 0 0 N + 1 1 0 1 Y + 1 1 0 0 N + 1 1 1 0 N + 1 1 1 1 Y + +Reset Value + No pstream is present after reset; each of the BE, BK, VI,VO pstreams must be created + (either implicitly by data flow or explicitly by user) + +Restrictions + This command can only be issued when the device is in the CONNECTED state. If + the device receives the command while in DISCONNECTED state, it replies with a + failure indication. At most four prioritized data endpoints can be created, one for + each AC. + +See Also + “DELETE_PSTREAM” +===================================================================== + +Name + DELETE_BAD_AP + +Synopsis + The host uses this command to clear a particular entry in the bad AP table + +Command + wmiconfig eth1 --rmAP [--num=<index>] // used to clear a badAP + entry. num is index from 0-3 + +Command Parameters + UINT8 badApIndex Index [0...n] that identifies the entry in the bad + AP table to delete + +Command Values + badApIndex = 0, 1, 2, 3 + Entry in the bad AP table + +Reset Value + None defined + +Restrictions + None + +See Also + “ADD_BAD_AP” + +===================================================================== + + +Name + DELETE_CIPHER_KEY + +Synopsis + The host uses this command to delete a key that was previously added with the + “ADD_CIPHER_KEY” command. + +Command + TBD + +Command Parameters + UINT8 keyIndex Index (0...3) of the key to be deleted + +Command Values + keyIndex = 0, 1,2, 3 Key to delete + +Reset Value + None + +Restrictions + The host should not delete a key that is currently in use by the AR6000. + +See Also + “ADD_CIPHER_KEY” + +===================================================================== + +Name + DELETE_PSTREAM + +Synopsis + The host uses this command to delete a prioritized data endpoint created by a + previous “CREATE_PSTREAM” command + +Command + --deleteqos <trafficClass> <tsid>, where: + + <traffic class> + = 0 BE + = 1 BK + = 2 VI + = 3 VO + <tsid> + The TSpec ID; use the -qosqueue option + to get the active TSpec IDs for each traffic class + +Command Parameters + A_UINT8 trafficClass Indicate the traffic class of the stream + being deleted + +Command Values + { + WMM_AC_BE = 0 Best effort + WMM_AC_BK = 1 Background + WMM_AC_VI = 2 Video + WMM_AC_VO = 3 Voice + } TRAFFIC CLASS + + 0-15 for TSID + +Reply Values + N/A + +Restrictions + This command should only be issued after a “CREATE_PSTREAM” command has + successfully created a prioritized stream + +See Also + “CREATE_PSTREAM” + +===================================================================== + + +Name + DELETE_WOW_PATTERN + +Synopsis + The host uses this command to remove a pre-specified pattern from the + WoW pattern list. + +Command + wmiconfig –delwowpattern <list-id> <pattern-id> + +Command Parameters + A_UINT8 filter_list_id ID of the list that contains the WoW filter + pattern to delete + A_UINT8 filter_id ID of the WoW filter pattern to delete + +Reply Parameters + None + + + +Reset Value + None defined + +Restrictions + None + +See Also + “ADD_WOW_PATTERN” + +===================================================================== + + +Name + EXTENSION + +Synopsis + The WMI message interface is used mostly for wireless control messages to a wireless + module applicable to wireless module management regardless of the target platform + implementation. However, some commands only peripherally related to wireless + management are desired during operation. These wireless extension commands may + be platform-specific or implementation-dependent. + +Command + N/A + +Command Parameters + Command-specific + +Command Values + Command-specific + +Reply Parameters + Command-specific + +Reset Values + None defined + +Restrictions + None defined + +===================================================================== + + +Name + GET_BIT_RATE + +Synopsis + Used by the host to obtain the rate most recently used by the AR6000 device + +Command + wmiconfig eth1 --getfixrates + +Command Parameters + None + + + +Reply Parameters + INT8 + rateIndex + See the “SET_BIT_RATE” command + +Reset Values + None + +Restrictions + This command should only be used during development/debug; it is not intended +for use in production. It is only valid when the device is in the CONNECTED state + +See Also + “SET_BIT_RATE” + +===================================================================== + + +Name + GET_CHANNEL_LIST + +Synopsis + Used by the host uses to retrieve the list of channels that can be used by the device + while in the current wireless mode and in the current regulatory domain. + +Command + TBD + +Command Parameters + None + +Reply Parameters + UINT8 reserved Reserved + UINT8 numberOfChannels Number of channels the reply contains + UINT16 channelList[numberOfChannels] Array of channel frequencies (in MHz) + +Reset Values + None defined + +Restrictions + The maximum number of channels that can be reported are 32 + +===================================================================== + + +Name + GET_FIXRATES + +Synopsis + Clears the current calculated RSSI and SNR value. RSSI and SNR are reported by + running-average value. This command will clear the history and have a fresh start for + the running-average mechanism. + +Synopsis + This returns rate-mask set via WMI_SET_FIXRATES to retrieve the current fixed rate + that the AR6001 or AR6001 is using. See “SET_FIXRATES”. + +Command + wmiconfig eth1 --getfixrates + +Command Parameters + A_UINT16 fixRateMask; Note: if this command is used prior to + using WMI_SET_FIXRATES, AR6000 + returns 0xffff as fixRateMask, indicating + all the rates are enabled + +Reply Parameters + None + +Reset Value + None defined + +Restrictions + None + +See Also + “SET_FIXRATES” + +===================================================================== + + + +Name + GET_PMKID_LIST_CMD + +Synopsis + Retrieves the list of PMKIDs on the firmware. The + WMI_GET_PMKID_LIST_EVENT is generated by the firmware. + +Command + TBD + +Command Parameters + +Reset Values + None + +Restrictions + None + +See Also + SET_PMKID_LIST_CMD GET_PMKID_LIST_EVENT + +===================================================================== + + +Name + GET_ROAM_TBL + +Synopsis + Retrieve the roaming table maintained on the target. The response is reported + asynchronously through the ROAM_TBL_EVENT. + +Command + wmiconfig --getroamtable <roamctrl> <info> + +Command Parameters + A_UINT8 roamCtrlType; + A_UINT16 roamMode + A_UINT16 numEntries + WMI_BSS_ROAM_INFO bssRoamInfo[1] + +Reply Value + Reported asynchronously through the ROAM_TBL_EVENT + +Reset Value + None defined + +Restrictions + None + +See Also + SET_KEEPALIVE + +===================================================================== + + +Name + GET_TARGET_STATS + +Synopsis + The host uses this command to request that the target send the statistics that it + maintains. The statistics obtained from the target are accrued in the host every time + the GET_TARGET_STATS command is issued. The --clearStats option is added to + clear the target statistics maintained in the host. + +Command + wmiconfig --getTargetStats --clearStats + +Command Parameters + TARGET_STATS targetStats + WMI_TARGET_STATS + UINT8 clearStats + + +Reply Value + RSSI return value (0–100) + +Reset Values + All statistics are cleared (zeroed) + +Restrictions + The --getTargetStats option must be used; the --clearStats option is also available also + + +===================================================================== + +Name + GET_TX_PWR + +Synopsis + The host uses this command to retrieve the current Tx power level + +Command + wmiconfig -i eth1 --getpower + +Command Parameters + None + +Reply Parameters + UINT16 dbM The current Tx power level specified in dbM + +Reset Values + The maximum permitted by the regulatory domain + +Restrictions + None + +See Also + “SET_TX_PWR” + +===================================================================== + + +Name + GET_WOW_LIST + +Synopsis + The host uses this command to retrieve the current list of WoW patterns. + +Command + wmiconfig –getwowlist <list-id> + +Command Parameters + A_UINT8 filter_list_id ID of the list of WoW patterns to retrieve + +Reply Value(s) + A_UINT16 num_filters Number of WoW patterns contained in the list + A_UINT8 wow_mode Current mode of WoW (enabled or disabled) + A_UINT8 host_mode Current host mode (asleep or awake) + WOW_FILTER wow_filters[1] + Contents of the WoW filter pattern list + (contains mask, pattern, offset and size + information for each of the patterns) + +Reset Value + None defined + +Restrictions + None + +See Also + “SET_WSC_STATUS” + +===================================================================== + + +Name + LQ_THRESHOLD_PARAMS + +Synopsis + Sets Link Quality thresholds, the sampling will happen at every unicast data frame + Tx if a certain threshold is met, and the corresponding event will be sent to the host. + +Command + --lqThreshold <enable> <upper_threshold_1> ... + <upper_threshold_4> <lower_threshold_1> ... <lower_threshold_4> + +Command Parameters + <enable> = 0 Disable link quality sampling + = 1 Enable link quality sampling + <upper_threshold_x> Above thresholds (value in [0,100]), in + ascending order + <lower_threshold_x> Below thresholds (value in [0,100]), in + ascending order + +Command Values + See command parameters + +Reset Value + None defined + +Restrictions + None + +===================================================================== + + +Name + OPT_TX_FRAME + +Synopsis + Special feature, sends a special frame. + +Command + wmiconfig --sendframe <frmType> <dstaddr> <bssid> <optIEDatalen> + <optIEData> + +Command Parameters + { + A_UINT16 optIEDataLen; + A_UINT8 frmType; + A_UINT8 dstAddr[ATH_MAC_LEN]; + A_UINT8 bssid[ATH_MAC_LEN]; + A_UINT8 optIEData[1]; + } WMI_OPT_TX_FRAME_CMD; + +Command Values + <frmtype> = 1 Probe request frame + = 2 Probe response frame + = 3 CPPP start + = 4 CPPP stop + +Reset Value + None defined + +Restrictions + Send a special frame only when special mode is on. + +===================================================================== + + +Name + RECONNECT + +Synopsis + This command requests a reconnection to a BSS to which the AR6000 device was + formerly connected + +Command + TBD + +Command Parameters + UINT16 channel Provides a hint as to which channel was + used for a previous connection + UINT8 bssid[6] If set, indicates which BSSID to connect to + +Command Values + None + +Reset Values + None + +Restrictions + None + +See Also + “CONNECT_CMD” + +===================================================================== + + +Name + RSSI_THRESHOLD_PARAMS + +Synopsis + Configures how the AR6000 device monitors and reports signal strength (RSSI) of the + connected BSS, which is used as a link quality metric. The four RSSI threshold sets (in + dbM) of the host specification divide the signal strength range into six segments. + When signal strength increases or decreases across one of the boundaries, an + RSSI_THRESHOLD event is signaled to the host. The host may then choose to take + action (such as influencing roaming). + +Command + wmiconfig eth1 --rssiThreshold <weight> <pollTime> + <above_threshold_val_1> ... <above_threshold_tag_6> + <above_threshold_val_6> + <below_threshold_tag_1> <below_threshold_val_1> ... + <below_threshold_tag_6> <below_threshold_val_6> + +Command Parameters + UINT8 weight Range in [1, 16] used to calculate average RSSI + UINT32 pollTime RSSI (signal strength) sampling frequency in + seconds (if pollTime = 0, single strength + sampling is disabled) + USER_RSS__THOLD tholds[12] Thresholds (6 x 2) + +Command Values + None defined + +Reset Values + pollTime is 0, and sampling is disabled + +Restrictions + Can only be issued if the AR6000 device is connected + + +===================================================================== + +Name + SCAN_PARAMS + +Synopsis + The minact parameter determines the minimum active channel dwell time, within + which if the STA receives any beacon, it remains on that channel until the maxact + channel dwell time. If the STA does not receive a beacon within the minact dwell + time, it switches to scan the next channel. + +Command + wmiconfig -scan -minact=<ms> --maxact=<ms> + +Command Parameters + UINT16 maxact Channel dwell time (in ms), default = 0 + UINT16 minact Channel dwell time (in ms), default = 105 + +Command Values + See channel parameters + +Reset Values + None defined + +Restrictions + The minact value should be greater than 0; maxact should be between 5–65535 ms + and greater than minact + +===================================================================== + + +Name + SET_ACCESS_PARAMS + +Synopsis + Allows the host to set access parameters for the wireless network. A thorough + understanding of IEEE 802.11 is required to properly manipulate these parameters. + +Command + wmiconfig eth1 --acparams --txop <limit> --cwmin <0-15> + --cwmax <0-15> --aifsn<0-15> + +Command Parameters + UINT16 txop The maximum time (expressed in units of + 32 ms) the device can spend transmitting + after acquiring the right to transmit + UINT8 eCWmin Minimum contention window + UINT8 eCWmax Maximum contention window + UINT8 aifsn The arbitration inter-frame space number + +Command Values + None + +Reset Values + Reasonable defaults that vary, between endpoints (prioritized streams) + +Restrictions + None + +===================================================================== + + +Name + SET_ADHOC_BSSID + +Synopsis + Allows the host to set the BSSID for an ad hoc network. If a network with this BSSID + is not found, the target creates an ad hoc network with this BSSID after the connect + WMI command is triggered (e.g., by the SIOCSIWESSID IOCTL). + +Command + wmiconfig eth1 --adhocbssid <bssid> + +Command Parameters + A_UINT8 bssid[ATH_MAC_LEN] BSSID is specified in xx:xx:xx:xx:xx:xx format + +Command Values + None + +Reset Values + None + +Restrictions + None + +===================================================================== + + +Name + SET_AKMP_PARAMS + +Synopsis + Enables or disables multi PMKID mode. + +Command + wmiconfig eth1 --setakmp --multipmkid=<on/off> + +Command Parameters + typedef struct { + A_UINT32 akmpInfo; + } WMI_SET_AKMP_PARAMS_CMD; + +Command Values + akmpInfo; + bit[0] = 0 + MultiPMKID mode is disabled and PMKIDs that + were set using the WMI_SET_PMKID_CMD are + used in the [Re]AssocRequest frame. + bit[0] = 1 + MultiPMKID mode is enabled and PMKIDs issued + by the WMI_SET_PMKID_LIST_CMD are used in + the next [Re]AssocRequest sent to the AP. + +Reset Values + MultiPMKID mode is disabled + +Restrictions + None + +===================================================================== + + +Name + SET_APPIE + +Synopsis + Add an application-specified IE to a management frame. The maximum length is + 76 bytes. Including the length and the element ID, this translates to 78 bytes. + +Command + wmiconfig --setappie <frame> <IE>, where: + + frame + One of beacon, probe, respon, assoc + + IE + A hex string beginning with DD (if = 0, no + IE is sent in the management frame) + +Command Parameters + mgmtFrmType; + A WMI_MGMT_FRAME_TYPE + + ieLen; + Length of the IE to add to the GMT frame + +Command Values + None + +Reset Value + None defined + +Restrictions + Supported only for the probe request and association request management frame +types. Also, only one IE can be added per management frame type. + +===================================================================== + + +Name + SET_ASSOC_INFO + +Synopsis + The host uses this command to specify any information elements (IEs) it wishes the + AR6000 device to add to all future association and reassociation requests. IEs must be + correct and are used as is by the device. IEs specified through this command are + cleared with a DISCONNECT. + +Command + wmiconfig eth1 --setAssocIe <IE> + +Command Parameters + UINT8 ieType Used directly in 802.11 frames + UINT8 bufferSize Size of assocInfo (in bytes) ranging from + 0–240. If = 0, previously set IEs are cleared. + UINT8 assocInfo[bufferSize] Used directly in 802.11 frames + +Command Values + None + +Reset Values + IEs are cleared + +Restrictions + This command can only be issued in the DISCONNECTED state + +===================================================================== + + +Name + SET_AUTHMODE + +Synopsis + Sets the 802.11 authentication mode of reconnection + +Command + wmiconfig eth1 --setauthmode <mode> + +Command Parameters + UINT8 mode + +Command Values + mode = 0x00 Proceed with authentication during reconnect + = 0x01 Do not proceed with authentication during reconnect + +Reset Values + Authentication + +Restrictions + None + +===================================================================== + + +Name + SET_BEACON_INT + +Synopsis + Sets the beacon interval for an ad hoc network. Beacon interval selection may have an + impact on power savings. To some degree, a longer interval reduces power + consumption but also decreases throughput. A thorough understanding of IEEE + 802.11 ad hoc networks is required to use this command effectively. + +Command + wmiconfig eth1 --ibssconintv + +Command Parameters + UINT16 beaconInterval Specifies the beacon interval in TU units (1024 ms) + +Command Values + None + +Reset Values + The default beacon interval is 100 TUs (102.4 ms) + +Restrictions + This command can only be issued before the AR6000 device starts an ad hoc network + +See Also + “SET_IBSS_PM_CAPS” + +===================================================================== + + +Name + SET_BIT_RATE + +Synopsis + The host uses this command to set the AR6000 device to a specific fixed rate. + +Command + wmiconfig eth1 --setfixrates <rate_0> ... <rate_n> + +Command Parameters + INT8 rateIndex + A WMI_BIT_RATE value + { + RATE_AUTO = -1 + RATE_1Mb = 0 + RATE_2Mb = 1 + RATE_5_5M = 2 + RATE_11Mb = 3 + RATE_6Mb = 4 + RATE_9Mb = 5 + RATE_12Mb = 6 + RATE_18Mb = 7 + RATE_24Mb = 8 + RATE_36Mb = 9 + RATE_48Mb = 10 + RATE_54Mb = 11 + } WMI_BIT_RATE + + +Command Values + See command parameters + +Reset Values + The dynamic rate is determined by the AR6000 device + +Restrictions + This command is intended for use only during development/debug; it is not +intended for use in production + +See Also + “GET_BIT_RATE” + +===================================================================== + + +Name + SET_BMISS_TIME + +Synopsis + This command sets the beacon miss (BMISS) time, which the AR6000 hardware use + to recognize missed beacons. When an excessive number (15) of consecutive beacons + are missed, the AR6000 consider switching to a different BSS. The time can be + specified in number of beacons or in TUs. + +Command(s) + wmiconfig eth1 --setbmissbeacons=<val> + wmiconfig eth1 --setbmisstime=<val> + +Command Parameters + UINT16 bmissTime Specifies the beacon miss time + [1000...5000] in TUs (1024 ms) + UINT16 bmissbeacons Specifies the number of beacons [5...50] + +Command Values + None + +Reset Values + bmissTime is 1500 TUs (1536 ms) + +Restrictions + None + +===================================================================== + + +Name + SET_BSS_FILTER + +Synopsis + The host uses this to inform the AR6000 device of the types of networks about which + it wants to receive information from the “BSSINFO” event. As the device performs + either foreground or background scans, it applies the filter and sends “BSSINFO” + events only for the networks that pass the filter. If any of the bssFilter or the ieMask + filter matches, a BSS Info is sent to the host. The ieMask currently is used as a match + for the IEs in the beacons, probe reponses and channel switch action management + frame. See also “Scan and Roam” on page C-1. + + The BSS filter command has been enhanced to support IE based filtering. The IEs can + be specified as a bitmask through this command using this enum. + +Command + wmiconfig eth1 –filter = <filter> --ieMask 0x<mask> + +Command Parameters + UINT8 BssFilter + + Command Values + typedef struct { + A_UINT8 bssFilter; See WMI_BSS_FILTER + A_UINT32 ieMask; + } __ATTRIB_PACK WMI_BSS_FILTER_CMD; + + The ieMask can take this combination of values: + + enum { + BSS_ELEMID_CHANSWITCH = 0x01 + BSS_ELEMID_ATHEROS = 0x02, + } + +Reply Value + None + +Reset Value + BssFilter = NONE_BSS_FILTER (0) + +Restrictions + None + +See Also + “CONNECT_CMD” + +===================================================================== + + +Name + SET_BT_PARAMS + +Synopsis + This command is used to set the status of a Bluetooth stream or set Bluetooth + coexistence register parameters. The stream may be an SCO or an A2DP stream and + its status can be started/stopped/suspended/resumed. + +Command + wmiconfig –setBTparams <paramType> <params> + +Command Parameters + struct { + union { + BT_PARAMS_SCO scoParams; + BT_PARAMS_A2DP a2dpParams; + BT_PARAMS_MISC miscParams; + BT_COEX_REGS regs; + } info; + A_UINT8 paramType; + struct { + A_UINT8 noSCOPkts; Number of SCO packets between consecutive PS-POLLs + A_UINT8 pspollTimeout; + A_UINT8 stompbt; + } BT_PARAMS_SCO; + struct { + A2DP BT stream parameters + A_UINT32 period; + A_UINT32 dutycycle; + A_UINT8 stompbt; + } BT_PARAMS_A2DP; + struct { + union { + WLAN_PROTECT_POLICY_TYPE protectParams; + A_UINT16 wlanCtrlFlags; + }info; + A_UINT8 paramType; + } BT_PARAMS_MISC; + struct { + BT coexistence registers values + A_UINT32 mode; Coexistence mode + A_UINT32 scoWghts; WLAN and BT weights + A_UINT32 a2dpWghts; + A_UINT32 genWghts; + A_UINT32 mode2; Coexistence mode2 + A_UINT8 setVal; + } BT_COEX_REGS; + +Command Values + None defined + +Reset Value + None + +Restrictions + None + +===================================================================== + + +Name + SET_BT_STATUS + +Synopsis + Sets the status of a Bluetooth stream. The stream may be a SCO or an A2DP stream + and its status can be started/stopped/suspended/resumed. + +Command + wmiconfig –setBTstatus <streamType> <status> + +Command Parameters + { + A_UINT8 streamType; Stream type + A_UINT8 status; Stream status + }WMI_SET_BT_STATUS_CMD; + +Command Values + { + BT_STREAM_UNDEF = 0 + BT_STREAM_SCO + SCO stream + BT_STREAM_A2DP + A2DP stream + BT_STREAM_MAX + } BT_STREAM_TYPE; + + { + BT_STATUS_UNDEF = 0 + BT_STATUS_START + BT_STATUS_STOP + BT_STATUS_RESUME + BT_STATUS_SUSPEND + BT_STATUS_MAX + } BT_STREAM_STATUS; + +Reset Value + None defined + +Restrictions + None + +===================================================================== + + +Name + SET_CHANNEL_PARAMETERS + +Synopsis + Configures various WLAN parameters related to channels, sets the wireless mode, + and can restrict the AR6000 device to a subset of available channels. The list of + available channels varies depending on the wireless mode and the regulatory + domain. The device never operates on a channel outside of its regulatory domain. The + device starts to scan the list of channels right after this command. + +Command + wmiconfig eth1 --wmode <mode> <list> + +Command Parameters + UINT8 phyMode See Values below. + UINT8 numberOfChannels + Number of channels in the channel array that + follows. If = 0, then the device uses all of the + channels permitted by the regulatory domain + and by the specified phyMode. + UINT16 channel[numberOfChannels] + Array listing the subset of channels (expressed + as frequencies in MHz) the host wants the + device to use. Any channel not permitted by + the specified phyMode or by the specified + regulatory domain is ignored by the device. + +Command Values + phyMode = { + Wireless mode + 11a = 0x01 + 11g = 0x02 + 11ag = 0x03 + 11b = 0x04 + 11g only = 0x05 + } + +Reset Values + phyMode + 11ag + 802.11a/g modules + 11g + 802.11g module + channels + Defaults to all channels permitted by the + current regulatory domain. + +Restrictions + This command, if issued, should be issued soon after reset and prior to the first + connection. This command should only be issued in the DISCONNECTED state. + +===================================================================== + + +Name + SET_DISC_TIMEOUT + +Synopsis + The host uses this command to configure the amount of time that the AR6000 should + spend when it attempts to reestablish a connection after losing link with its current + BSS. If this time limit is exceeded, the AR6000 send a “DISCONNECT” event. After + sending the “DISCONNECT” event the AR6000 continues to attempt to reestablish a + connection, but they do so at the interval corresponding to a foreground scan as + established by the “SET_SCAN_PARAMS” command. + + A timeout value of 0 indicates that the AR6000 will disable all autonomous roaming, + so that the AR6000 will not perform any scans after sending a “DISCONNECT” + event to the host. The state is maintained until a shutdown or host sets different + timeout value from 0. + +Command + wmiconfig eth1 --disc=<timeout in seconds> + +Command Parameters + UINT8 disconnectTimeout + Specifies the time limit (in seconds) after + which a failure to reestablish a connection + results in a “DISCONNECT” event + +Command Values + None + +Reset Values + disconnectTimeout is 10 seconds + +Restrictions + This command can only be issued while in a DISCONNECTED state + +===================================================================== + + +Name + SET_FIXRATES + +Synopsis + By default, the AR6000 device uses all PHY rates based on mode of operation. If the + host application requires the device to use subset of supported rates, it can set those + rates with this command. In 802.11g mode, the AR6000 device takes the entire + 802.11g basic rate set and the rates specified with this command and uses it as the + supported rate set. + + This rate set is advertised in the probe request and the assoc/re-assoc request as + supported rates. Upon successful association, the device modifies the rate set pool + using the: intersection of AP-supported rates with the union of the 802.11g basic rate + set and rates set using this command. The device picks transmission rates from this + pool based on a rate control algorithm. + +Command + TBD + +Command Parameters + A_UINT16 fixRateMask; + The individual bit is an index for rate table, + and setting the that index to 1 would set that + corresponding rate. E.g., fixRateMask = 9 + (1001) sets 1 Mbps and 11 Mbps. + +Command Values + None + +Reset Value + None defined + +Restrictions + None + +See Also + “GET_FIXRATES” + +===================================================================== + + +Name + SET_WHAL_PARAM + +Synopsis + An internal AR6000 command that is used to set certain hardware parameters. The + description of this command is in $WORKAREA/include/halapi.h. + +Command + TBD + +Command Parameters + ATH_HAL_SETCABTO_CMDID + Sets the timeout waiting for the multicast + traffic after a DTIM beacon (in TUs). + +Command Values + None + +Reset Value + Default = 10 TUs + +Restrictions + This command should be executed before issuing a connect command. + +===================================================================== + + +Name + SET_HOST_SLEEP_MODE + +Synopsis + The host uses this command to set the host mode to asleep or awake. All packets are + delivered to the host when the host mode is awake. When host mode is asleep, only if + WoW is enabled and the incoming packet matches one of the specified WoW + patterns, will the packet be delivered to the host. The host will also be woken up by + the target for pattern-matching packets and important events. + +Command + wmiconfig –sethostmode=<asleep/awake> + +Command Parameters + A_BOOL awake Set the host mode to awake + A_BOOL asleep Set the host mode to asleep + +Command Values + 1 = awake, 0 = asleep + +Reset Value + None defined (default host mode is awake) + +Restrictions + None + + +===================================================================== + +Name + SET_IBSS_PM_CAPS + +Synopsis + Used to support a non-standard power management scheme for an ad hoc wireless + network consisting of up to eight stations (STAs) that support this form of power + saving (e.g., Atheros-based STAs). A thorough understanding of IEEE 802.11 ad hoc + networks is required to use this command effectively. + +Command + wmiconfig eth1 --ibsspmcaps --ps=<enable/disable> + --aw=<ATIM Windows in ms> + --ttl=<Time to live in number of beacon periods> + --to=<timeout in ms> + +Command Parameters + UINT8 power_saving + = 0 + The non-standard power saving scheme is + disabled and maximum throughput (with no + power saving) is obtained. + + = 1 + Ad hoc power saving scheme is enabled (but + throughput may be decreased) + + UINT16 atim_windows + Specifies the length (in ms) of the ad hoc traffic + indication message (ATIM) windows used in an ad + hoc network. All Atheros-based STAs that join the + network use this duration ATIM window. + + The duration is communicated between wireless + STAs through an IE in beacons and probe responses. + + The host sets atim_windows to control trade-offs + between power use and throughput. The value + chosen should be based on the beacon interval (see + the “SET_BEACON_INT” command) on the + expected number of STAs in the IBSS, and on the + amount of traffic and traffic patterns between STAs. + + UINT16 timeout_value + Specifies the timeout (in ms). The value is the same + for all ad hoc connections, but tracks separately for + each. + + Applicable only for a beacon period and used to + derive actual timeout values on the Tx and Rx sides. + On the Tx side, the value defines a window during + which the STA accepts the frame(s) from the host for a + particular connection. Until closed, the window + restarts with every frame received from the host. On + the Rx side, indicates the time until which the STA + continues accepting frames from a particular + connection. The value resets with every frame + received. The value can be used to determine the + trade off between throughput and power. + Default = 10 ms + + UINT8 ttl + Specifies the value in number of beacon periods. The + value is used to set a limit on the time until which a + frame is kept alive in the AR6001 before being + discarded. Default = 5 + +Command Values + None + +Reset Values + By default, power_saving is enabled with atim_window = 20 ms + +Restrictions + Can only be issued before the AR6000 starts an ad hoc network + +See Also + “SET_BEACON_INT” + +===================================================================== + + + +Name + SET_LISTEN_INT + +Synopsis + The host uses this command to request a listen interval, which determines how often + the AR6000 device should wake up and listen for traffic. The listen interval can be set + by the TUs or by the number of beacons. The device may not be able to comply with + the request (e.g., if the beacon interval is greater than the requested listen interval, the + device sets the listen interval to the beacon interval). The actual listen interval used + by the device is available in the “CONNECT” event. + +Command + wmiconfig eth1 --listen=<#of TUs, can range from 15 to 3000> + + --listenbeacons=<#of beacons, can range from 1 to 50> + +Command Parameters + UINT16 listenInterval + Specifies the listen interval in Kms + (1024 ms), ranging from 100 to 1000 + + UINT16 listenbeacons + Specifies the listen interval in beacons, + ranging from 1 to 50 + +Command Values + None + +Reset Values + The device sets the listen interval equal to the beacon interval of the AP it associates + to. + +Restrictions + None + +===================================================================== + + +Name + SET_LPREAMBLE + +Synopsis + Overrides the short preamble capability of the AR6000 device + +Command + TBD + +Command Parameters + WMI_LPREAMBLE_DISABLED + The device is short-preamble capable + + WMI_LPREAMBLE_ENABLED + The device supports only the long- + preamble mode + +Command Values + None + +Reset Value + None defined + +Restrictions + None + + +===================================================================== + +Name + SET_MAX_SP_LEN + +Synopsis + Set the maximum service period; indicates the number of packets the AR6001 can + receive from the AP when triggered + +Command + wmiconfig eth1 --setMaxSPLength <maxSPLen> + +Command Parameters + UINT8 maxSPLen + An APSD_SP_LEN_TYPE value + +Command Values + { + DELIVER_ALL_PKT = 0x0 + DELIVER_2_PKT = 0x1 + DELIVER_4_PKT = 0x2 + DELIVER_6_PKT = 0x3 + }APSD_SP_LEN_TYPE + + +Reset Values + maxSPLen is DELIVER_ALL_PKT + +Restrictions + None + +===================================================================== + + +Name + SET_OPT_MODE + +Synopsis + Special feature, sets the special mode on/off + +Command + wmiconfig eth1 --mode <mode> + Set the optional mode, where mode is special or off + +Command Parameters + enum { + SPECIAL_OFF + SPECIAL_ON + } OPT_MODE_TYPE; + +Command Values + +Reset Value + Mode = Off + +Restrictions + None + +===================================================================== + + +Name + SET_PMKID + +Synopsis + The host uses this command to enable or disable a pairwise master key ID (PMKID) + in the AR6000 PMKID cache. The AR6000 clears its PMKID cache on receipt of a + DISCONNECT command from the host. Individual entries in the cache might be + deleted as the AR6000 detect new APs and decides to remove old ones. + +Command + wmiconfig eth1 --setbsspmkid --bssid=<aabbccddeeff> + --bsspmkid=<pmkid> + +Command Parameters + UINT8 bssid[6] + The MAC address of the AP that the + PMKID corresponds to (6 bytes in hex + format) + + UINT8 enable + Either PMKID_DISABLE (0) to disable + the PMKID or PMKID_ENABLE (1) to + enable it (16 bytes in hex format) + + UINT8 pmkid[16] + Meaningful only if enable is + PMKID_ENABLE, when it is the PMKID + that the AR6000 should use on the next + reassociation with the specified AP + +Command Values + enable + = 0 (disable), 1 (enable) + PKMID enabled/disabled + +Reset Values + None defined + +Restrictions + Only supported in infrastructure networks + +===================================================================== + + +Name + SET_PMKID_LIST_CMD + +Synopsis + Configures the list of PMKIDs on the firmware. + +Command + wmiconfig --setpmkidlist --numpmkid=<n> --pmkid=<pmkid_1> + ... --pmkid=<pmkid_n> + + Where n is the number of pmkids (maximum = 8) and pmkid_i is the ith pmkid (16 + bytes in hex format) + +Command Parameters + { + A_UINT8 pmkid[WMI_PMKID_LEN]; + } __ATTRIB_PACK WMI_PMKID; + + { + A_UINT32 numPMKID; + WMI_PMKID pmkidList[WMI_MAX_PMKID_CACHE]; + } __ATTRIB_PACK WMI_SET_PMKID_LIST_CMD; + +Command Values + None + +Reset Values + None + +Restrictions + Supported only in infrastructure modes + +===================================================================== + + +Name + SET_POWER_MODE + +Synopsis + The host uses this command to provide the AR6000 device with guidelines on the + desired trade-off between power utilization and performance. + + In normal power mode, the device enters a sleep state if they have nothing to do, + which conserves power but may cost performance as it can take up to 2 ms to + resume operation after leaving sleep state. + + In maximum performance mode, the device never enters sleep state, thus no time + is spent waking up, resulting in higher power consumption and better + performance. + +Command + TBD + +Command Parameters + UINT8 powerMode + WMI_POWER_MODE value + { + REC_POWER = 1 + (Recommended setting) Tries to conserve + power without sacrificing performance + MAX_PERF_POWER = 2 + Setting that maximizes performance at + the expense of power + + All other values are reserved + } WMI_POWER_MODE + +Command Values + See command parameters + +Reset Values + powerMode is REC_POWER + +Restrictions + This command should only be issued in the DISCONNECTED state for the + infrastructure network. + + For a PM-disabled ad hoc network, the power mode should remain in + MAX_PERF_POWER. + + For a PM-enabled ad hoc network, the device can have REC_POWER or + MAX_PERF_POWER set, but either way it must follow the power save ad hoc + protocol. The host can change power modes in the CONNECTED state. + + Host changes to the PS setting when the STA is off the home channel take no effect + and cause a TARGET_PM_FAIL event. + +===================================================================== + + +Name + SET_POWER_PARAMS + +Synopsis + The host uses this command to configure power parameters + +Command + wmiconfig eth1 --pmparams --it=<ms> --np=<number of PS POLL> + --dp=<DTIM policy: ignore/normal/stick> + +Command Parameters + UINT16 idle_period + Length of time (in ms) the AR6000 device + remains awake after frame Rx/Tx before going + to SLEEP state + + UINT16 pspoll_number + The number of PowerSavePoll (PS-poll) + messages the device should send before + notifying the AP it is awake + + UINT16 dtim_policy + A WMI_POWER_PARAMS_CMD value + + { + IGNORE_DTIM =1 + The device does not listen to any content after + beacon (CAB) traffic + NORMAL_DTIM = 2 + DTIM period follows the listen interval (e.g., if + the listen interval is 4 and the DTIM period is 2, + the device wakes up every fourth beacon) + STICK_DTIM = 3 + Device attempt to receive all CAB traffic (e.g., if + the DTIM period is 2 and the listen interval is 4, + the device wakes up every second beacon) + } WMI_POWER_PARAMS_CMD + +Command Parameters + See command parameters + +Reset Values + idle_period + 200 ms + + pspoll_number + = 1 + + dtim_policy + = NORMAL_DTIM + +Restrictions + None + +===================================================================== + + +Name + SET_POWERSAVE_PARAMS + +Synopsis + Set the two AR6000 power save timers (PS-POLL timer and APSD trigger timer) and + the two ASPD TIM policies + +Command + wmiconfig eth1--psparams --psPollTimer=<psPollTimeout in ms> + --triggerTimer=<triggerTimeout in ms> --apsdTimPolicy=<ignore/ + adhere> --simulatedAPSDTimPolicy=<ignore/adhere> + +Command Parameters + typedef struct { + A_UINT16 psPollTimeout; + Timeout (in ms) after sending PS-POLL; the + AR6000 device sleeps if it does not receive a + data packet from the AP + + A_UINT16 triggerTimeout; + Timeout (in ms) after sending a trigger; the + device sleeps if it does not receive any data + or null frame from the AP + + APSD_TIM_POLICY apsdTimPolicy; + TIM behavior with queue APSD enabled + + APSD_TIM_POLICY simulatedAPSD + + TimPolicy; + TIM behavior with simulated APSD + enabled + + typedef enum { + IGNORE_TIM_ALL_QUEUES_APSD = 0, + PROCESS_TIM_ALL_QUEUES_APSD = 1, + IGNORE_TIM_SIMULATED_APSD = 2, + POWERSAVE_TIMERS_POLICY = 3, + } APSD_TIM_POLICY; + +Command Values + None + +Reset Values + psPollTimeout is 50 ms; triggerTimeout is 10 ms; + apsdTimPolicy = IGNORE_TIM_ALL_QUEUES_APSD; + simulatedAPSDTimPolicy = POWERSAVE_TIMERS_POLICY + +Restrictions + When this command is used, all parameters must be set; this command does not + allow setting only one parameter. + +===================================================================== + + +Name + SET_PROBED_SSID + +Synopsis + The host uses this command to provide a list of up to MAX_PROBED_SSID_INDEX + (six) SSIDs that the AR6000 device should actively look for. It lists the active SSID + table. By default, the device actively looks for only the SSID specified in the + “CONNECT_CMD” command, and only when the regulatory domain allows active + probing. With this command, specified SSIDs are probed for, even if they are hidden. + +Command + wmiconfig eth1 --ssid=<ssid> [--num=<index>] + +Command Parameters + { + A_UINT8 numSsids + A number from 0 to + MAX_PROBED_SSID_INDEX indicating + the active SSID table entry index for this + command (if the specified entry index + already has an SSID, the SSID specified in + this command replaces it) + + WMI_PROBED_SSID_INFO probedSSID[1] + } WMI_PROBED_SSID_CMD + + { + A_UINT8 flag + WMI_SSID_FLAG indicates the current + entry in the active SSID table + A_UINT8 ssidLength + Length of the specified SSID in bytes. + If = 0, the entry corresponding to the + index is erased + A_UINT8 ssid[32] + SSID string actively probed for when + permitted by the regulatory domain + } WMI_PROBED_SSID_INFO + +Command Values + WMI_SSID_FLAG + { + DISABLE_SSID_FLAG = 0 + Disables entry + SPECIFIC_SSID_FLAG = 1 + Probes specified SSID + ANY_SSID_FLAG = 2 + Probes for any SSID + } WMI_SSID_FLAG + +Reset Value + The entries are unused. + +Restrictions + None + +===================================================================== + + +Name + SET_REASSOC_MODE + +Synopsis + Specify whether the disassociated frame should be sent or not upon reassociation. + +Command + wmiconfig eth1 --setreassocmode <mode> + +Command Parameters + UINT8 mode + +Command Values + mode + = 0x00 + Send disassoc to a previously connected AP + upon reassociation + = 0x01 + Do not send disassoc to previously connected + AP upon reassociation + +Reset Values + None defined + +Restrictions + None + + +===================================================================== + +Name + SET_RETRY_LIMITS + +Synopsis + Allows the host to influence the number of times that the AR6000 device should + attempt to send a frame before they give up. + +Command + wmiconfig --setretrylimits <frameType> <trafficClass> <maxRetries> + <enableNotify> + +Command Parameters + { + UINT8 frameType + A WMI_FRAMETYPE specifying + which type of frame is of interest. + UINT8 trafficClass + Specifies a traffic class (see + “CREATE_PSTREAM”). This + parameter is only significant when + frameType = DATA_FRAMETYPE. + UINT8 maxRetries + Maximum number of times the + device attempts to retry a frame Tx, + ranging from WMI_MIN_RETRIES + (2) to WMI_MAX_RETRIES (15). If + the special value 0 is used, + maxRetries is set to 15. + A_UINT8 enableNotify + Notify when enabled + } WMI_RETRY_LIMIT_INFO + + { + A_UINT8 numEntries + WMI_RETRY_LIMIT_INFO retryLimitInfo[1] + } WMI_SET_RETRY_LIMITS_CMD + +Command Values + { + MGMT_FRAMETYPE = 0 Management frame + CONTROL_FRAMETYPE = 1 Control frame + DATA_FRAMETYPE = 2 Data frame + } WMI_FRAMETYPE + +Reset Values + Retries are set to 15 + +Restrictions + None + +===================================================================== + + +Name + SET_ROAM_CTRL + +Synopsis + Affects how the AR6000 device selects a BSS. The host uses this command to set and + enable low RSSI scan parameters. The time period of low RSSI background scan is + mentioned in scan period. Low RSSI scan is triggered when the current RSSI + threshold (75% of current RSSI) is equal to or less than scan threshold. + + Low RSSI roam is triggered when the current RSSI threshold falls below the roam + threshold and roams to a better AP by the end of the scan cycle. During Low RSSI + roam, if the STA finds a new AP with an RSSI greater than roam RSSI to floor, during + scan, it roams immediately to it instead of waiting for the end of the scan cycle. See + also “Scan and Roam” on page C-1. + +Command + wmiconfig --roam <roamctrl> <info>, where info is <scan period> + <scan threshold> <roam threshold> <roam rssi floor> + +Command Parameters + A_UINT8 roamCtrlType; + +Command Values + WMI_FORCE_ROAM = 1 + Roam to the specified BSSID + + WMI_SET_ROAM_MODE = 2 + Default, progd bias, no roam + + WMI_SET_HOST_BIAS = 3 + Set the host bias + + WMI_SET_LOWRSSI_SCAN_PARAMS = 4 + Info parameters + + A_UINT8 bssid[ATH_MAC_LEN]; + WMI_FORCE_ROAM + + A_UINT8 roamMode; + WMI_SET_ROAM_MODE + + A_UINT8 bssBiasInfo; + WMI_SET_HOST_BIAS + + A_UINT16 lowrssi_scan_period; + WMI_SET_LOWRSSI_SCAN_PARAMS + + A_INT16 + lowrssi_scan_threshold; + WMI_SET_LOWRSSI_SCAN_PARAMS + + A_INT16 lowrssi_roam_threshold; + WMI_SET_LOWRSSI_SCAN_PARAMS + + A_UINT8 roam_rssi_floor; + WMI_SET_LOWRSSI_SCAN_PARAMS + +Reset Value + None defined (default lowrssi scan is disabled. Enabled only when scan period is set.) + +Restrictions + None + +===================================================================== + + +Name + SET_RTS + +Synopsis + Decides when RTS should be sent. + +Command + wmiconfig eth1 --setRTS <pkt length threshold> + +Command Parameters + A_UINT16 + threshold; + Command parameter threshold in bytes. An RTS is + sent if the data length is more than this threshold. + The default is to NOT send RTS. + +Command Values + None + +Reset Value + Not to send RTS. + +Restrictions + None + + +===================================================================== + +Name + SET_SCAN_PARAMS + +Synopsis + The host uses this command to set the AR6000 scan parameters, including the duty + cycle for both foreground and background scanning. Foreground scanning takes + place when the AR6000 device is not connected, and discovers all available wireless + networks to find the best BSS to join. Background scanning takes place when the + device is already connected to a network and scans for potential roaming candidates + and maintains them in order of best to worst. A second priority of background + scanning is to find new wireless networks. + + The device initiates a scan when necessary. For example, a foreground scan is always + started on receipt of a “CONNECT_CMD” command or when the device cannot find + a BSS to connect to. Foreground scanning is disabled by default until receipt of a + CONNECT command. Background scanning is enabled by default and occurs every + 60 seconds after the device is connected. + + The device implements a binary backoff interval for foreground scanning when it + enters the DISCONNECTED state after losing connectivity with an AP or when a + CONNECT command is received. The first interval is ForegroundScanStartPeriod, + which doubles after each scan until the interval reaches ForegroundScanEndPeriod. + If the host terminates a connection with DISCONNECT, the foreground scan period + is ForegroundScanEndPeriod. All scan intervals are measured from the time a full + scan ends to the time the next full scan starts. The host starts a scan by issuing a + “START_SCAN” command. See also “Scan and Roam” on page C-1. + +Command + wmiconfig eth1 --scan --fgstart=<sec> --fgend=<sec> --bg=<sec> -- + act=<msec> --pas=<msec> --sr=<short scan ratio> --scanctrlflags + <connScan> <scanConnected> <activeScan> <reportBSSINFO> + +Command Parameters + UINT16 fgStartPeriod + First interval used by the device when it + disconnects from an AP or receives a + CONNECT command, specified in seconds (0– + 65535). If = 0, the device uses the reset value. + If = 65535, the device disables foreground + scanning. + + UINT16 fgEndPeriod + The maximum interval the device waits between + foreground scans specified in seconds (from + ForegroundScanStartPeriod to 65535). If = 0, the + device uses the reset value. + + UINT16 bgScanPeriod + The period of background scan specified in + seconds (0–65535). By default, it is set to the reset + value of 60 seconds. If 0 or 65535 is specified, the + device disables background scanning. + + UINT16 maxactChDwellTime + The period of time the device stays on a + particular channel while active scanning. It is + specified in ms (10–65535). If the special value of + 0 is specified, the device uses the reset value. + + UINT16 PasChDwellTime + The period of time the device remains on a + particular channel while passive scanning. It is + specified in ms (10–65535). If the special value of + 0 is specified, the device uses the reset value. + + UINT8 shortScanRatio + Number of short scans to perform for each + long scan. + + UINT8 scanCtrlFlasgs + + UINT16 minactChDwellTime + Specified in ms + + UINT32 maxDFSchActTime + The maximum time a DFS channel can stay + active before being marked passive, specified in + ms. + +Command Values + None + +Reset Values + ForegroundScanStart +Period + 1 sec + + ForegroundScanEndPeriod + 60 sec + + BackgroundScanPeriod + 60 sec + + ActiveChannelDwellTime + 105 ms + +===================================================================== + + +Name + SET_TKIP_COUNTERMEASURES + +Synopsis + The host issues this command to tell the target whether to enable or disable TKIP + countermeasures. + +Command + TBD + +Command Parameters + UINT8 WMI_TKIP_CM_ENABLE + Enables the countermeasures + + + UINT8 TKIP_CM_DISABLE + Disables the countermeasures + +Command Values + None + +Reset Values + By default, TKIP MIC reporting is disabled + +Restrictions + None + +===================================================================== + + +Name + SET_TX_PWR + +Synopsis + The host uses this command to specify the Tx power level of the AR6000. Cannot be + used to exceed the power limit permitted by the regulatory domain. The maximum + output power is limited in the chip to 31.5 dBm; the range is 0 – 31.5 dbm. + +Command + wmiconfig --power <dbM> + +Command Parameters + UINT8 dbM + The desired Tx power specified in dbM. + If = 0, the device chooses the maximum + permitted by the regulatory domain. + +Command Values + None + +Reset Values + The maximum permitted by the regulatory domain + +Restrictions + None + +See Also + “GET_TX_PWR” + + +===================================================================== + +Name + SET_VOICE_PKT_SIZE + +Synopsis + If an AP does not support WMM, it has no way to differentiate voice from data. + Because the voice packet is typically small, packet in size less than voicePktSize are + assumed to be voice, otherwise it is treated as data. + +Command + wmiconfig eth1 --setVoicePktSize <size-in-bytes> + +Command Parameters + UINT16 voicePktSize + Packet size in octets + +Command Values + None + +Reset Values + voicePktSize default is 400 bytes + +Restrictions + No effect if WMM is unavailable + + +===================================================================== + +Name + SET_WMM + +Synopsis + Overrides the AR6000 device WMM capability + +Command + wmiconfig eth1 --setwmm <enable> + +Command Parameters + WMI_WMM_ENABLED + Enables WMM + + WMI_WMM_DISABLED + Disables WMM support + +Command Values + 0 = disabled + 1 = enabled + +Reset Value + WMM Disabled + +Restrictions + None + + +===================================================================== + +Name + SET_WMM_TXOP + +Synopsis + Configures TxOP Bursting when sending traffic to a WMM capable AP + +Command + wmiconfig eth1 --txopbursting <burstEnable> + + <burstEnable> + = 0 + Disallow TxOp bursting + + = 1 + Allow TxOp bursting + +Command Parameters + txopEnable + = WMI_TXOP_DISABLED + Disabled + + = WMI_TXOP_ENABLED + Enabled + +Command Values + txopEnable + = 0 Disabled + + = 1 Enabled + +Reset Value + Bursting is off by default + +Restrictions + None + +===================================================================== + + +Name + SET_WOW_MODE + +Synopsis + The host uses this command to enable or disable the WoW mode. When WoW mode + is enabled and the host is asleep, pattern matching takes place at the target level. + Only packets that match any of the pre-specified WoW filter patterns, will be passed + up to the host. The host will also be woken up by the target. Packets which do not + match any of the WoW patterns are discarded. + +Command + wmiconfig –setwowmode <enable/disable> + +Command Parameters + A_BOOL enable_wow + Enable or disable WoW: + +Command Values + = 0 + Disable WoW + + = 1 + Enable WoW + +Reset Value + None defined (default WoW mode is disabled). + +Restrictions + None + +See Also + “GET_WOW_LIST” + + +===================================================================== + +Name + SET_WSC_STATUS + +Synopsis + The supplicant uses this command to inform the target about the status of the WSC + registration protocol. During the WSC registration protocol, a flag is set so the target + bypasses some of the checks in the CSERV module. At the end of the registration, this + flag is reset. + +Command + N/A + +Command Parameters + A_BOOL status + = 1 WSC registration in progress + = 0 WSC protocol not running + +Reply Parameters + None + +Reset Value + None defined (default = 0) + +Restrictions + None + + +===================================================================== + +Name + SNR_THRESHOLD_PARAMS + +Synopsis + Configures how the AR6000 device monitors and reports SNR of the connected BSS, + used as a link quality metric. + +Command + --snrThreshold <weight> <upper_threshold_1> ... + <upper_threshold_4> <lower_threshold_1> ... <lower_threshold_4> + <pollTimer> + +Command Parameters + <weight> + Share with rssiThreshold. Range in [1, 16], used + in the formula to calculate average RSSI + + <upper_threshold_x> + Above thresholds expressed in db, in ascending + order + + <lower_threshold_x> + Below thresholds expressed in db, in ascending + order + + <pollTimer> + The signal strength sampling frequency in + seconds. If polltime = 0, signal strength + sampling is disabled + +Command Values + None + +Reset Value + None defined + +Restrictions + None + +===================================================================== + + +Name + START_SCAN + +Synopsis + The host uses this command to start a long or short channel scan. All future scans are + relative to the time the AR6000 device processes this command. The device performs + a channel scan on receipt of this command, even if a scan was already in progress. + The host uses this command when it wishes to refresh its cached database of wireless + networks. The isLegacy field will be removed (0 for now) because it is achieved by + setting CONNECT_PROFILE_MATCH_DONE in the CONNECT command. See also + “Scan and Roam” + +Command + wmiconfig eth1 --startscan <scan type> <forcefgscan> 0 + <homeDwellTime> <forceScanInterval> + +Command Parameters + UINT8 scanType + WMI_SCAN_TYPE + +Command Values + { + WMI_LONG_SCAN =0x0 + Requests a full scan + WMI_SHORT_SCAN =0x1 + Requests a short scan + } WMI_SCAN_TYPE + + A_BOOL forceFgScan + forceFgScan + = 0 + Disable the foreground scan + + forceFgScan + = 1 + Forces a foreground scan + + A_UINT32 homeDwellTime + Maximum duration in the home + channel (in ms) + + A_UINT32 forceScanInterval + Time interval between scans (in ms) + + A_UINT32 scanType + WMI_SCAN_TYPE + +Reset Value + Disable forcing foreground scan + +Restrictions + isLegacy field will no longer be supported (pass as 0 for now) + + +===================================================================== + +Name + SYNCHRONIZE + +Synopsis + The host uses this command to force a synchronization point between the command + and data paths + +Command + TBD + +Command Parameters + None + + + +Command Values + None + + + +Reset Values + None + + + +Restrictions + None + + +===================================================================== + +Name + TARGET_ERROR_REPORT_BITMASK + +Synopsis + Allows the host to control “ERROR_REPORT” events from the AR6000 device. + + If error reporting is disabled for an error type, a count of errors of that type is + maintained by the device. + + If error reporting is enabled for an error type, an “ERROR_REPORT” event is + sent when an error occurs and the error report bit is cleared. + + Error counts for each error type are available through the “GET_TARGET_STATS” + command. + +Command + wmiconfig eth1 --setErrorReportingBitmask + +Command Parameters + UINT32 bitmask + Represents the set of + WMI_TARGET_ERROR_VAL error types + enabled for reporting + +Command Values + { + WMI_TARGET_PM_ERR_FAIL = 0x00000001 + Power save fails (only two cases): + Retry out of null function/QoS null + function to associated AP for PS + indication' + Host changes the PS setting when + STA is off home channel + + WMI_TARGET_KEY_NOT_FOUND = 0x00000002 + No cipher key + WMI_TARGET_DECRYPTION_ERR = 0x00000004 + Decryption error + WMI_TARGET_BMISS = 0x00000008 + Beacon miss + WMI_PSDISABLE_NODE_JOIN = 0x00000010 + A non-PS-enabled STA joined the + PS-enabled network + WMI_TARGET_COM_ERR = 0x00000020 + Host/target communication error + WMI_TARGET_FATAL_ERR = 0x00000040 + Fatal error + } WMI_TARGET_ERROR_VAL + +Reset Values + Bitmask is 0, and all error reporting is disabled + +Restrictions + None + + +===================================================================== +WMI Events + +Event + Description + Page + + +BSSINFO + Contains information describing BSSs collected during a scan + +CAC_EVENTID + Indicates signalling events in admission control + +CMDERROR + The AR6000 device encounters an error while attempting to process + a command + +CONNECT + The device has connected to a wireless network + +DISCONNECT + The device lost connectivity with a wireless network + +ERROR_REPORT + An error has occurred for which the host previously requested + notification with the command + “TARGET_ERROR_REPORT_BITMASK” + +EXTENSION + WMI extension event + +GET_PMKID_LIST_EVENT + Created in response to a “GET_PMKID_LIST_CMD” command + +GET_WOW_LIST_EVENT + Response to the wmiconfig “GET_WOW_LIST” command to + retrieve the configured WoW patterns + +NEIGHBOR_REPORT + Neighbor APs that match the current profile were detected + +OPT_RX_FRAME_EVENT + (Special feature) informs the host of the reception of a special frame + +PSTREAM_TIMEOUT + A prioritized stream has been idle for a specified interval + +READY + The AR6000 device is ready to accept commands + +REGDOMAIN + The regulatory domain has changed + +REPORT_ROAM_DATA_EVENT + Reports the roam time calculations made by the device + (generated with a special build) + — + +REPORT_STATISTICS + Reply to a “GET_TARGET_STATS” command + +ROAM_TBL_EVENT + Reports the roam table + +RSSI_THRESHOLD + Signal strength from the connected AP has crossed the threshold + defined in the “RSSI_THRESHOLD_PARAMS” command + +SCAN_COMPLETE_EVENT + A scan has completed (added status SCAN_ABORTED in release 2.0) + +TEST_EVENT + Event generated by the TCMD + +TKIP_MICERROR + TKIP MIC errors were detected + +===================================================================== + +Name + BSSINFO + +Synopsis + Contains information describing one or more BSSs as collected during a scan. + Information includes the BSSID, SSID, RSSI, network type, channel, supported rates, + and IEs. BSSINFO events are sent only after the device receives a beacon or probe- + response frame that pass the filter specified in the “SET_BSS_FILTER” command. + BSSINFO events consist of a small header followed by a copy of the beacon or probe + response frame. The 802.11 header is not present. For formats of beacon and probe- + response frames please consult the IEEE 802.11 specification. + + The beacons or probe responses containing the IE specified by the + WMI_BSS_FILTER_CMD are passed to the host through the + WMI_BSSINFO_EVENT. The event carries a 32-bit bitmask that indicates the IEs that + were detected in the management frame. The frame type field has been extended to + indicate action management frames. This would be helpful to route these frames + through the same event mechanism as used by the beacon processing function. + + If the bssFilter in the SET_BSS_FILTER matches, then the ieMask is not relevant + because the BSSINFO event is sent to the host. If the bssFilter doesnot match in the + beacons/probe respones, then the ieMask match dictates whether the BSSINFO + event is sent to the host. In the case of action management frames, the ieMask is the + filter that is applied. + +Event ID + 0x1004 + +Event Parameters + typedef struct { + A_UINT16 channel; + Specifies the frequency (in MHz) where the + frame was received + A_UINT8 frameType; + A WMI_BI_FTYPE value + A_UINT8 snr; + A_INT16 rssi; + Indicates signal strength + A_UINT8 bssid[ATH_MAC_LEN]; + A_UINT32 ieMask; + } _ATTRIB_PACK_WMI_BSS_INFO_HDR; + + Beacon or Probe Response Frame + +Event Values + { + BEACON_FTYPE = 0x1 + Indicates a beacon frame + PROBERESP_FTYPE + Indicates a probe response frame + ACTION_MGMT_FTYPE + } WMI_BI_FTYPE + +===================================================================== + +Name + CAC_EVENTID + +Synopsis + Indicates signalling events in admission control. Events are generated when + admission is accepted, rejected, or deleted by either the host or the AP. If the AP does + not respond to an admission request within a timeout of 500 ms, an event is + generated to the host. + +Event ID + 0x1011 + +Event Parameters + UINT8 + ac + Access class pertaining to the +signalling + + UINT8 cac_indication + Type of indication; indications are + listed in WMI_CAC_INDICATION + + UINT8 statusCode + AP response status code for a + request + + UINT8 tspecSuggestion[63] + Suggested TSPEC from AP + +Event Values + { + CAC_INDICATION_ADMISSION = 0x00 + CAC_INDICATION_ADMISSION_RESP = 0x01 + CAC_INDICATION_DELETE = 0x02 + CAC_INDICATION_NO_RESP = 0x03 + } WMI_CAC_INDICATION + + +===================================================================== + + +Name + CMDERROR + +Synopsis + Indicates that the AR6000 device encountered an error while attempting to process a + command. This error is fatal and indicates that the device requires a reset. + +Event ID + 0x1005 + +Event Parameters + UINT16 commandId + Corresponds to the command which generated + the error + UINT8 errorCode + A WMI_ERROR_CODE value + +Event Values + { + INVALID_PARAM = 1 + Invalid parameter + ILLEGAL_STATE = 2 + Illegal state + INTERNAL_ERROR = 3 + Internal Error + All other values reserved + } WMI_ERROR_CODE + + +===================================================================== + + +Name + CONNECT + +Synopsis + Signals that the AR6000 connected to a wireless network. Connection occurs due to a + “CONNECT” command or roaming to a new AP. For infrastructure networks, shows + that the AR6000 successfully performed 802.11 authentication and AP association. + +Event ID + 0x1002 + +Event Parameters + UINT16 channel + Channel frequency (in MHz) of the network the + AR6000 are connected to + + UINT8 bssid[6] + MAC address of the AP the AR6000 are + connected to or the BSSID of the ad hoc + network + + UINT16 listenInterval + Listen interval (in Kms) that the AR6000 are + using + + UINT 8 beaconIeLen + Length (in bytes) of the beacon IEs + + UINT8 assocInfo + Pointer to an array containing beacon IEs, + followed first by association request IEs then by + association response IEs + + UINT8 assocReqLen + Length (in bytes) of the assocReqIEs array + + UINT8 assocRespLen + Length (in bytes) of the assocRespIEs array + +Event Values + None defined + +===================================================================== + + +Name + DISCONNECT + +Synopsis + Signals that the AR6000 device lost connectivity with the wireless network. + DISCONENCT is generated when the device fails to complete a “CONNECT” + command or as a result of a transition from a connected state to disconnected state. + + After sending the “DISCONNECT” event the device continually tries to re-establish + a connection. A LOST_LINK occurs when STA cannot receive beacons within the + specified time for the SET_BMISS_TIME command. + +Event ID + 0x1003 + +Event Parameters + UINT8 disconnect + Reason + A WMI_DISCONNECT_REASON value + + UINT8 bssid[6] + Indicates which BSS the device was connected to + + UINT8 assocRespLen + Length of the 802.11 association response frame + that triggered this event, or 0 if not applicable + + UINT8 assocInfo[assocRespLen] + Copy of the 802.11 association response frame + +Event Values + { + NO_NETWORK_AVAIL =0x01 + Indicates that the device was unable to + establish or find the desired network + LOST_LINK =0x02 + Indicates the devices is no longer receiving + beacons from the BSS it was previously + connected to + + DISCONNECT_CMD =0x03 + Indicates a “DISCONNECT” command was + processed + BSS_DISCONNECTED =0x04 + Indicates the BSS explicitly disconnected the + device. Possible mechanisms include the AP + sending 802.11 management frames + (e.g., disassociate or deauthentication + messages). + AUTH_FAILED =0x05 + Indicates that the device failed 802.11 + authentication with the BSS + ASSOC_FAILED =0x06 + Indicates that the device failed 802.11 + association with the BSS + NO_RESOURCES_AVAIL =0x07 + Indicates that a connection failed because the + AP had insufficient resources to complete the + connection + CSERV_DISCONNECT =0x08 + Indicates that the device’s connection services + module decided to disconnect from a BSS, + which can happen for a variety of reasons (e.g., + the host marks the current connected AP as a + bad AP). + INVALID_PROFILE =0x0A + Indicates that an attempt was made to + reconnect to a BSS that no longer matches the + current profile + All other values are reserved + } WMI_DISCONNECT_REASON + + +===================================================================== + + +Name + ERROR_REPORT + +Synopsis + Signals that a type of error has occurred for which the host previously requested + notification through the “TARGET_ERROR_REPORT_BITMASK” command. + +Event ID + 0x100D + +Event Parameters + UINT32 errorVal + WMI_TARGET_ERROR_VAL value. See + “TARGET_ERROR_REPORT_BITMASK”. + +Event Values + errorVal + = 0x00000001 + Power save fails + + = 0x00000002 + No cipher key + + = 0x00000004 + Decryption error + + = 0x00000008 + Beacon miss + + = 0x00000010 + A non-power save disabled node has joined + the PS-enabled network + + +===================================================================== + + +Name + EXTENSION + +Synopsis + The WMI is used mostly for wireless control messages to a wireless module that + apply to wireless module management regardless of the target platform + implementation. However, some events peripherally related to wireless management + are desired during operation. These wireless extension events may be platform- + specific or implementation-dependent. See “WMI Extension Commands” + + +Event ID + 0x1010 + + +===================================================================== + + +Name + GET_PMKID_LIST_EVENT + +Synopsis + Generated by firmware in response to a “GET_PMKID_LIST_CMD” command. + +Event Parameters + typedef struct { + A_UINT32 numPMKID; + Contains the number of PMKIDs in the reply + WMI_PMKID pmkidList[1]; + } __ATTRIB_PACK WMI_PMKID_LIST_REPLY; + +Event Values + None + + +===================================================================== + + +Name + GET_WOW_LIST_EVENT + +Synopsis + Response to the wmiconfig –getwowlist command to retrieve the configured Wake on + Wireless patterns + +Event ID + 0x10018 + +Event Parameters + { + + A_UINT8 num_filters + Total number of patterns in the list + A_UINT8 this_filter_num + The filter number + A_UINT8 wow_mode + Shows whether WoW is enabled or disabled + A_UINT8 host_mode + Shows whether the host is asleep or awake + WOW_FILTER wow_filters[1] + List of WoW filters (pattern and mask data bytes) + } WMI_GET_WOW_LIST_REPLY; + + { + Each wow_filter_list element shows: + A_UINT8 wow_valid_filter + Whether the filter is valid + A_UINT8 wow_filter_list_id + Filter List ID (23 = default) + A_UINT8 wow_filter_size + Size in bytes of the filter + A_UINT8 wow_filter_offset + Offset of the pattern to search in the data packet + A_UINT8 wow_filter_mask[MASK_SIZE] + The mask to be applied to the pattern + A_UINT8 wow_filter_pattern[WOW_PATTERN_SIZE] + The pattern that to match to wake up the host + } WOW_FILTER + +Event Values + None + +===================================================================== + + + +Name + NEIGHBOR_REPORT + +Synopsis + Indicates the existence of neighbor APs that match the current profile. The host uses + this event to populate the PMKID cache on the AR6000 and/or to perform + preauthentication. This event is only generated in infrastructure mode. + + A total of numberOfAps pairs of bssid/bssFlags exist, one pair for each AP. + +Event ID + 0x1008 + +Event Parameters + UINT8 numberOfAps + The number of APs reported about in + this event + { + UINT8 bssid[6] + MAC address of a neighbor AP + UINT8 bssFlags + A WMI_BSS_FLAGS value + }[numberOfAps] + + +Event Values + { + WMI_DEFAULT_BSS_FLAGS = 0 + Logical OR of 1 or more + WMI_BSS_FLAGS + WMI_PREAUTH_CAPABLE_BSS + = 1 + Indicates that this AP is capable of + preauthentication + WMI_PMKID_VALID_BSS + = 2 + Indicates that the AR6000 have a + valid pairwise master key for this AP + } WMI_BSS_FLAGS + + +===================================================================== + + + +Name + OPT_RX_FRAME_EVENT + +Synopsis + Special feature, informs host of the reception of a special frame. + +Event ID + 0x100E + +Event Parameters + { + A_UINT16 channel; + A_UINT8 frameType; + A_INT8 snr; + A_UINT8 srcAddr[ATH_MAC_LEN]; + A_UINT8 bssid[ATH_MAC_LEN]; + }WMI_OPT_RX_INFO_HDR + +Event Values + None + +===================================================================== + + + +Name + PSTREAM_TIMEOUT + +Synopsis + Indicates that a priority stream that got created as a result of priority-marked data + flow (priority marked in IP TOS) being idle for the default inactivity interval period + (specified in the “CREATE_PSTREAM” command) used for priority streams created + implicitly by the driver. This event is not indicated for user-created priority streams. + User-created priority streams exist until the users delete them explicitly. They do not + timeout due to data inactivity. + +Event ID + 0x1007 + +Event Parameters + A_UINT8 + trafficClass + Indicated the traffic class of priority + stream that timed out + +Event Values + { + WMM_AC_BE = 0 + Best effort + WMM_AC_BK = 1 + Background + WMM_AC_VI = 2 + Video + WMM_AC_VO = 3 + Voice + } TRAFFIC CLASS + + +===================================================================== + +Name + READY + +Synopsis + Indicates that the AR6000 device is prepared to accept commands. It is sent once after + power on or reset. It also indicates the MAC address of the device. + +Event ID + 0x1001 + +Event Parameters + UINT8 macAddr[6] + Device MAC address + UINT8 phyCapability + A WMI_PHY_CAPABILITY value. Indicates the + capabilities of the device wireless module’s radio + +Event Values + { + WMI_11A_CAPABILITY = 1 + WMI_11G_CAPABILITY = 2 + WMI_11AG_CAPABILITY = 3 + } WMI_PHY_CAPABILITY + + +===================================================================== + +Name + REGDOMAIN + +Synopsis + Indicates that the regulatory domain has changed. It initially occurs when the + AR6000 device reads the board data information. The regulatory domain can also + change when the device is a world-mode SKU. In this case, the regulatory domain is + based on the country advertised by APs per the IEEE 802.11d specification. A + potential side effect of a regulatory domain change is a change in the list of available + channels. Any channel restrictions that exist as a result of a previous + “SET_CHANNEL_PARAMETERS” command are lifted. + +Event ID + 0x1006 + +Event Parameters + UINT32 regDomain + The range of 0x0000 – 0x00FF + corresponds to an ISO country code. + + Other regCodes are reserved for world + mode settings and specific regulatory + domains. + +Event Values + None + + +===================================================================== + + + +Name + REPORT_STATISTICS + +Synopsis + A reply to a “GET_TARGET_STATS” command. + +Event ID + 0x100B + +Event Parameters + When the statistics are sent to the host, the AR6001 clear them so that a new set of + statistics are collected for the next report. + + UINT32 tx_packets + UINT32 tx_bytes + UINT32 tx_unicast_pkts + UINT32 tx_unicast_bytes + UINT32 tx_multicast_pkts + UINT32 tx_multicast_bytes + UINT32 tx_broadcast_pkts + UINT32 tx_broadcast_bytes + UINT32 tx_rts_success_cnt + UINT32 tx_packet_per_ac[4] + Tx packets per AC: [0] = BE, [1] = BK, + [2] = VI, [3] = VO + UINT32 tx_errors + Number of packets which failed Tx, due + to all failures + ... REPORT_STATISTICS, continued + UINT32 tx_failed_cnt + Number of data packets that failed Tx + UINT32 tx_retry_cnt + Number of Tx retries for all packets + UINT32 tx_rts_fail_cnt + Number of RTS Tx failed count + UINT32 rx_packets + UINT32 rx_bytes + UINT32 rx_unicast_pkts + UINT32 rx_unicast_bytes + UINT32 rx_multicast_pkts + UINT32 rx_multicast_bytes + UINT32 rx_broadcast_pkts + UINT32 rx_broadcast_bytes + UINT32 rx_fragment_pkt + Number of fragmented packets received + UINT32 rx_errors + Number of Rx errors due to all failures + UINT32 rx_crcerr + Number of Rx errors due to CRC errors + UINT32 rx_key_cache_miss + Number of Rx errors due to a key not + being plumbed + UINT32 rx_decrypt_err + Number of Rx errors due to decryption + failure + UINT32 rx_duplicate_frames + Number of duplicate frames received + UINT32 tkip_local_mic_failure + Number of TKIP MIC errors detected + UINT32 tkip_counter_measures_invoked + Number of times TKIP countermeasures + were invoked + UINT32 tkip_replays + Number of frames that replayed a TKIP + encrypted frame received earlier + UINT32 tkip_format_errors + Number of frames that did not conform + to the TKIP frame format + UINT32 ccmp_format_errors + Number of frames that did not conform + to the CCMP frame format + UINT32 ccmp_replays + Number of frames that replayed a CCMP + encrypted frame received earlier + UINT32 power_save_failure_cnt + Number of failures that occurred when + the AR6001 could not go to sleep + UINT32 cs_bmiss_cnt + Number of BMISS interrupts since + connection + UINT32 cs_lowRssi_cnt + Number of the times the RSSI went below + the low RSSI threshold + UINT16 cs_connect_cnt + Number of connection times + UINT16 cs_disconnect_cnt + Number of disconnection times + UINT8 cs_aveBeacon_rssi + The current averaged value of the RSSI + from the beacons of the connected BSS + UINT8 cs_lastRoam_msec + Time that the last roaming took, in ms. + This time is the difference between + roaming start and actual connection. + +Event Values + None defined + + +===================================================================== + +Name + ROAM_TBL_EVENT + +Synopsis + Reports the roam table, which contains the current roam mode and this information + for every BSS: + +Event ID + 0x100F + +Event Parameters + A_UINT8 bssid[ATH_MAC_LEN]; + BSSID + A_UINT8 rssi + Averaged RSSI + A_UINT8 rssidt + Change in RSSI + A_UINT8 last_rssi + Last recorded RSSI + A_UINT8 roam_util + Utility value used in roaming decision + A_UINT8 util + Base utility with the BSS + A_UINT8 bias + Host configured for this BSS + +Event Values + roamMode + Current roam mode + + = 1 + RSSI based roam + + = 2 + Host bias-based roam + + = 3 + Lock to the current BSS + + = 4 + Autonomous roaming disabled + + +===================================================================== + +Name + RSSI_THRESHOLD + +Synopsis + Alerts the host that the signal strength from the connected AP has crossed a + interesting threshold as defined in a previous “RSSI_THRESHOLD_PARAMS” + command. + +Event ID + 0x100C + +Event Parameters + UINT8 range + A WMI_RSSI_THRESHOLD_VAL + value, which indicates the range of + the average signal strength + +Event Values + { + WMI_RSSI_LOWTHRESHOLD_BELOW_LOWERVAL = 1 + WMI_RSSI_LOWTHRESHOLD_LOWERVAL = 2 + WMI_RSSI_LOWTHRESHOLD_UPPERVAL = 3 + WMI_RSSI_HIGHTHRESHOLD_LOWERVAL = 4 + WMI_RSSI_HIGHTHRESHOLD_HIGHERVAL = 5 + } WMI_RSSI_THRESHOLD_VAL + + +===================================================================== + +Name + SCAN_COMPLETE_EVENT + +Synopsis + Indicates the scan status. if the Scan was not completed, this event is generated with + the status A_ECANCELED. + +Event ID + 0x100A + +Event Parameters + A_UINT8 scanStatus + +Event Values + { + #define SCAN_ABORTED 16 + #define SCAN_COMPLETED 0 + A_UINT8 scanStatus + A_OK or A_ECANCELED + } WMI_SCAN_COMPLETE_EVENT; + + +===================================================================== + +Name + TEST_EVENT + +Synopsis + The TCMD application uses a single WMI event (WMI_TEST_EVENTID) to + communicate events from target to host. The events are parsed by the TCMD + application and WMI layer is oblivious of it. + +Event ID + 0x1016 + +Event Parameters + WMI_TEST_EVENTID + + +Event Values + None + + +===================================================================== + + + +Name + TKIP_MICERR + +Synopsis + Indicates that TKIP MIC errors were detected. + +Event ID + 0x1009 + +Event Parameters + UINT8 keyid + Indicates the TKIP key ID + + UINT8 ismcast + 0 = Unicast + 1 = Multicast + +Event Values + See event parameters + +===================================================================== + +WMI Extension Commands + +The WMI EXTENSION command is used to multiplex a collection of +commands that: + + Are not generic wireless commands + May be implementation-specific + May be target platform-specific + May be optional for a host implementation + + An extension command is sent to the AR6000 targets like any other WMI +command message and uses the WMI_EXTENSION. The first field of the +payload for this EXTENSION command is another commandId, sometimes +called the subcommandId, which indicates which extension command is +being used. A subcommandId-specific payload follows the subcommandId. + +All extensions (subcommandIds) are listed in the header file include/wmix.h. +See also “WMI Extension Events” on page B-58. + + +WMI Extension Commands + + +GPIO_INPUT_GET + Read GPIO pins configured for input + +GPIO_INTR_ACK + Acknowledge and re-arm GPIO interrupts reported earlier + +GPIO_OUTPUT_SET + Manage output on GPIO pins configured for output + +GPIO_REGISTER_GET + Read an arbitrary GPIO register + +GPIO_REGISTER_SET + Dynamically change GPIO configuration + +SET_LQTHRESHOLD + Set link quality thresholds; the sampling happens at every unicast + data frame Tx, if certain thresholds are met, and corresponding + events are sent to the host + + +===================================================================== + +Name + GPIO_INPUT_GET + +Synopsis + Allows the host to read GPIO pins that are configured for input. The values read are + returned through a “GPIO_DATA” extension event. + +NOTE: Support for GPIO is optional. + +Command + N/A + +Command Parameters + None + + + +Reply Parameters + None + + +Reset Value + None + + + +Restrictions + None + +===================================================================== + + +Name + GPIO_INTR_ACK + +Synopsis + The host uses this command to acknowledge and to re-arm GPIO interrupts reported + through an earlier “GPIO_INTR” extension event. A single “GPIO_INTR_ACK” + command should be used to acknowledge all GPIO interrupts that the host knows to + be outstanding (if pending interrupts are not acknowledged through + “GPIO_INTR_ACK”, another “GPIO_INTR” extension event is raised). + +NOTE: Support for GPIO is optional. + +Command + N/A + +Command Parameters + UINT32 ack_mask + A mask of interrupting GPIO pins (e.g., ack_mask + bit [3] acknowledges an interrupt from the pin GPIO3). + +Command Values + None + +Reset Value + None + +Restrictions + The host should acknowledge only interrupts about which it was notified. + + +===================================================================== + +Name + GPIO_OUTPUT_SET + +Synopsis + Manages output on GPIO pins configured for output. + + Conflicts between set_mask and clear_mask or enable_mask and disable_mask result + in undefined behavior. + +NOTE: Support for GPIO is optional. + +Command + N/A + +Command Parameters + UINT32 set_mask + Specifies which pins should drive a 1 out + UINT32 clear_mask + Specifies which pins should drive a 0 out + UINT32 enable_mask + Specifies which pins should be enabled for output + UINT32 disable_mask + Specifies which pins should be disabled for output + +Command Values + None + + +Reset Value + None + + +Restrictions + None + + + +===================================================================== + + +Name + GPIO_REGISTER_GET + +Synopsis + Allows the host to read an arbitrary GPIO register. It is intended for use during + bringup/debug. The target responds to this command with a “GPIO_DATA” event. + +NOTE: Support for GPIO is optional. + +Command + N/A + +Command Parameters + UINT32 + gpioreg_id + Specifies a GPIO register identifier, as defined +in include/AR6000/AR6000_gpio.h + +Reply Parameters + None + +Reset Value + N/A + +Restrictions + None + + +===================================================================== + +Name + GPIO_REGISTER_SET + +Synopsis + Allows the host to dynamically change GPIO configuration (usually handled + statically through the GPIO configuration DataSet). + +NOTE: Support for GPIO is optional. + +Command + N/A + +Command Parameters + UINT32 gpioreg_id + Specifies a GPIO register identifier, as defined in + include/AR6000/AR6000_gpio.h + UINT32 value + Specifies a value to write to the specified + GPIO register + +Command Values + None + + +Reset Value + Initial hardware configuration is as defined in the AR6001 or AR6002 ROCmTM + Single-Chip MAC/BB/Radio for 2.4/5 GHz Embedded WLAN Applications data sheet. This + configuration is modified by the GPIO Configuration DataSet, if one exists. + +Restrictions + None + + +===================================================================== + + +Name + SET_LQTHRESHOLD + +Synopsis + Set link quality thresholds, the sampling happens at every unicast data frame Tx, if + certain threshold is met, corresponding event will be sent to host. + +Command + wmiconfig eth1 --lqThreshold <enable> <upper_threshold_1>... + <upper_threshold_4> <lower_threshold_1>... <lower_threshold_4> + +Command Parameters + A_UINT8 enable; + A_UINT8 thresholdAbove1_Val; + A_UINT8 thresholdAbove2_Val; + A_UINT8 thresholdAbove3_Val; + A_UINT8 thresholdAbove4_Val; + A_UINT8 thresholdBelow1_Val; + A_UINT8 thresholdBelow2_Val; + A_UINT8 thresholdBelow3_Val; + A_UINT8 thresholdBelow4_Val; + +Command Values + enable + = 0 + Disable link quality sampling + + = 1 + Enable link quality sampling + + + thresholdAbove_Val + [1...4] + Above thresholds (value in [0,100]), in ascending + order threshold + + Below_Val [1...4] = below thresholds (value + in [0,100]), in ascending order + +Reset Values + None + +Restrictions + None + +===================================================================== +WMI Extension Events + +The WMI EXTENSION event is used for a collection of events that: + + Are not generic wireless events + May be implementation-specific + May be target platform-specific + May be optional for a host implementation + + An extension event is sent from the AR6000 device targets to the host just like +any other WMI event message, using the WMI_EXTENSION_EVENTID. The +first field of the payload for this “EXTENSION” event is another commandId +(sometimes called the subcommandId) that indicates which “EXTENSION” +event is being used. A subcommandId-specific payload follows the +subcommandId. + +All extensions (subcommandIds) are listed in the header file include/wmix.h. +See also “WMI Extension Commands” on page B-55. + + +WMI Extension Events + + +GPIO_ACK + Acknowledges a host set command has been processed by the device + +GPIO_DATA + Response to a host’s request for data + +GPIO_INTR + Signals that GPIO interrupts are pending + + +===================================================================== + +Name + GPIO_ACK + +Synopsis + Acknowledges that a host set command (either “GPIO_OUTPUT_SET” or + “GPIO_REGISTER_SET”) has been processed by the AR6000 device. + +NOTE: Support for GPIO is optional. + +Event ID + N/A + +Event Parameters + None + + +Event Values + None + +===================================================================== + + +Name + GPIO_DATA + +Synopsis + The AR6000 device uses this event to respond to the host’s earlier request for data + (through either a “GPIO_REGISTER_GET” or a “GPIO_INPUT_GET” command). + +NOTE: Support for GPIO is optional. + +Event ID + N/A + +Event Parameters + UINT32 value + Holds the data of interest, which is either a register value + (in the case of “GPIO_REGISTER_GET”) or a mask of + pin inputs (in the case of “GPIO_INPUT_GET”). + UINT32 reg_id + Indicates which register was read (in the case of + “GPIO_REGISTER_GET”) or is GPIO_ID_NONE (in the + case of “GPIO_INPUT_GET”) + +Event Values + None + + +===================================================================== + + + +Name + GPIO_INTR + +Synopsis + The AR6000 device raises this event to signal that GPIO interrupts are pending. + These GPIOs may be interrupts that occurred after the last “GPIO_INTR_ACK” + command was issued, or may be GPIO interrupts that the host failed to acknowledge + in the last “GPIO_INTR_ACK”. The AR6000 will not raise another GPIO_INTR + event until this event is acknowledged through a “GPIO_INTR_ACK” command. + +NOTE: Support for GPIO is optional. + +Event ID + N/A + +Event Parameters + UINT32 intr_mask + Indicates which GPIO interrupts are currently pending + + UINT32 input_values + A recent copy of the GPIO input values, taken at the + time the most recent GPIO interrupt was processed + +Event Values + None + + + +===================================================================== +#endif diff --git a/drivers/ar6000/wmi/wmi_host.h b/drivers/ar6000/wmi/wmi_host.h new file mode 100644 index 00000000000..57844bcf3df --- /dev/null +++ b/drivers/ar6000/wmi/wmi_host.h @@ -0,0 +1,71 @@ +#ifndef _WMI_HOST_H_ +#define _WMI_HOST_H_ +/* + * Copyright (c) 2004-2006 Atheros Communications Inc. + * All rights reserved. + * + * This file contains local definitios for the wmi host module. + * + * $Id: //depot/sw/releases/olca2.0-GPL/host/wmi/wmi_host.h#1 $ + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation; + * + * Software distributed under the License is distributed on an "AS + * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + * implied. See the License for the specific language governing + * rights and limitations under the License. + * + * + * + */ + +#ifdef __cplusplus +extern "C" { +#endif + +struct wmi_stats { + A_UINT32 cmd_len_err; + A_UINT32 cmd_id_err; +}; + +struct wmi_t { + A_BOOL wmi_ready; + A_BOOL wmi_numQoSStream; + A_UINT8 wmi_wmiStream2AcMapping[WMI_PRI_MAX_COUNT]; + WMI_PRI_STREAM_ID wmi_ac2WmiStreamMapping[WMM_NUM_AC]; + A_UINT16 wmi_streamExistsForAC[WMM_NUM_AC]; + A_UINT8 wmi_fatPipeExists; + void *wmi_devt; + struct wmi_stats wmi_stats; + struct ieee80211_node_table wmi_scan_table; + A_UINT8 wmi_bssid[ATH_MAC_LEN]; + A_UINT8 wmi_powerMode; + A_UINT8 wmi_phyMode; + A_UINT8 wmi_keepaliveInterval; + A_MUTEX_T wmi_lock; +}; + +#define WMI_INIT_WMISTREAM_AC_MAP(w) \ +{ (w)->wmi_wmiStream2AcMapping[WMI_BEST_EFFORT_PRI] = WMM_AC_BE; \ + (w)->wmi_wmiStream2AcMapping[WMI_LOW_PRI] = WMM_AC_BK; \ + (w)->wmi_wmiStream2AcMapping[WMI_HIGH_PRI] = WMM_AC_VI; \ + (w)->wmi_wmiStream2AcMapping[WMI_HIGHEST_PRI] = WMM_AC_VO; \ + (w)->wmi_ac2WmiStreamMapping[WMM_AC_BE] = WMI_BEST_EFFORT_PRI; \ + (w)->wmi_ac2WmiStreamMapping[WMM_AC_BK] = WMI_LOW_PRI; \ + (w)->wmi_ac2WmiStreamMapping[WMM_AC_VI] = WMI_HIGH_PRI; \ + (w)->wmi_ac2WmiStreamMapping[WMM_AC_VO] = WMI_HIGHEST_PRI; } + +#define WMI_WMISTREAM_ACCESSCATEGORY(w,s) (w)->wmi_wmiStream2AcMapping[s] +#define WMI_ACCESSCATEGORY_WMISTREAM(w,ac) (w)->wmi_ac2WmiStreamMapping[ac] + +#define LOCK_WMI(w) A_MUTEX_LOCK(&(w)->wmi_lock); +#define UNLOCK_WMI(w) A_MUTEX_UNLOCK(&(w)->wmi_lock); + +#ifdef __cplusplus +} +#endif + +#endif /* _WMI_HOST_H_ */ diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index fee678f74a1..c6b9a40bffa 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -235,6 +235,13 @@ config GPIO_ADP5588 To compile this driver as a module, choose M here: the module will be called adp5588-gpio. +config GPIO_PCF50633 + tristate "GPIO support for NXP PCF50633" + depends on MFD_PCF50633 + help + Say yes here if you want to include support GPIO for pins on + the PCF50633 chip. + comment "PCI GPIO expanders:" config GPIO_CS5535 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 10f3f8d958b..4fc4675a67b 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -27,4 +27,5 @@ obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o obj-$(CONFIG_GPIO_WM8350) += wm8350-gpiolib.o obj-$(CONFIG_GPIO_WM8994) += wm8994-gpio.o -obj-$(CONFIG_GPIO_SCH) += sch_gpio.o
\ No newline at end of file +obj-$(CONFIG_GPIO_SCH) += sch_gpio.o +obj-$(CONFIG_GPIO_PCF50633) += pcf50633-gpio.o diff --git a/drivers/gpio/pcf50633-gpio.c b/drivers/gpio/pcf50633-gpio.c new file mode 100644 index 00000000000..eb044e805bf --- /dev/null +++ b/drivers/gpio/pcf50633-gpio.c @@ -0,0 +1,228 @@ +/* NXP PCF50633 GPIO Driver + * + * (C) 2006-2008 by Openmoko, Inc. + * Author: Balaji Rao <balajirrao@openmoko.org> + * Copyright 2010, Lars-Peter Clausen <lars@metafoo.de> + * All rights reserved. + * + * Broken down from monstrous PCF50633 driver mainly by + * Harald Welte, Andy Green and Werner Almesberger + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/platform_device.h> + +#include <linux/mfd/pcf50633/core.h> +#include <linux/mfd/pcf50633/gpio.h> +#include <linux/gpio.h> + +#define PCF50633_REG_GPIOCTL 0x13 +#define PCF50633_REG_GPIOCFG(x) (0x14 + (x)) + +enum pcf50633_regulator_id { + PCF50633_REGULATOR_AUTO, + PCF50633_REGULATOR_DOWN1, + PCF50633_REGULATOR_DOWN2, + PCF50633_REGULATOR_LDO1, + PCF50633_REGULATOR_LDO2, + PCF50633_REGULATOR_LDO3, + PCF50633_REGULATOR_LDO4, + PCF50633_REGULATOR_LDO5, + PCF50633_REGULATOR_LDO6, + PCF50633_REGULATOR_HCLDO, + PCF50633_REGULATOR_MEMLDO, +}; + +#define PCF50633_REG_AUTOOUT 0x1a +#define PCF50633_REG_DOWN1OUT 0x1e +#define PCF50633_REG_DOWN2OUT 0x22 +#define PCF50633_REG_MEMLDOOUT 0x26 +#define PCF50633_REG_LDO1OUT 0x2d +#define PCF50633_REG_LDO2OUT 0x2f +#define PCF50633_REG_LDO3OUT 0x31 +#define PCF50633_REG_LDO4OUT 0x33 +#define PCF50633_REG_LDO5OUT 0x35 +#define PCF50633_REG_LDO6OUT 0x37 +#define PCF50633_REG_HCLDOOUT 0x39 + +static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = { + [PCF50633_REGULATOR_AUTO] = PCF50633_REG_AUTOOUT, + [PCF50633_REGULATOR_DOWN1] = PCF50633_REG_DOWN1OUT, + [PCF50633_REGULATOR_DOWN2] = PCF50633_REG_DOWN2OUT, + [PCF50633_REGULATOR_MEMLDO] = PCF50633_REG_MEMLDOOUT, + [PCF50633_REGULATOR_LDO1] = PCF50633_REG_LDO1OUT, + [PCF50633_REGULATOR_LDO2] = PCF50633_REG_LDO2OUT, + [PCF50633_REGULATOR_LDO3] = PCF50633_REG_LDO3OUT, + [PCF50633_REGULATOR_LDO4] = PCF50633_REG_LDO4OUT, + [PCF50633_REGULATOR_LDO5] = PCF50633_REG_LDO5OUT, + [PCF50633_REGULATOR_LDO6] = PCF50633_REG_LDO6OUT, + [PCF50633_REGULATOR_HCLDO] = PCF50633_REG_HCLDOOUT, +}; + +struct pcf50633_gpio { + struct pcf50633 *pcf; + struct gpio_chip chip; +}; + +static inline struct pcf50633 *gpio_chip_to_pcf50633(struct gpio_chip *chip) +{ + struct pcf50633 *pcf = dev_to_pcf50633(chip->dev->parent); + return pcf; +} + +static void pcf50633_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value) +{ + struct pcf50633 *pcf = gpio_chip_to_pcf50633(chip); + u8 reg; + + reg = PCF50633_REG_GPIOCFG(gpio); + + pcf50633_reg_set_bit_mask(pcf, reg, 0x07, value ? 0x7 : 0x0); +} + +static int pcf50633_gpio_get_value(struct gpio_chip *chip, unsigned gpio) +{ + struct pcf50633 *pcf = gpio_chip_to_pcf50633(chip); + return pcf50633_reg_read(pcf, PCF50633_REG_GPIOCFG(gpio)) >> 3; +} + + +static int pcf50633_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, + int value) +{ + struct pcf50633 *pcf = gpio_chip_to_pcf50633(chip); + int ret; + + ret = pcf50633_gpio_set_config(pcf, pcf->pdata->gpio_base + gpio, + PCF50633_GPIO_CONFIG_OUTPUT); + if (!ret) + pcf50633_gpio_set_value(chip, gpio, value); + + return ret; +} + +static int pcf50633_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + return -ENOSYS; +} + +int pcf50633_gpio_set_config(struct pcf50633 *pcf, unsigned gpio, + enum pcf50633_gpio_config config) +{ + u8 reg; + u8 direction; + int ret; + + gpio -= pcf->pdata->gpio_base; + + if (gpio < 3) { + direction = (config == PCF50633_GPIO_CONFIG_INPUT) ? (1 << gpio) : 0; + ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_GPIOCTL, (1 << gpio), + direction); + if (ret) { + return ret; + } + } else if (gpio > 3 || config == PCF50633_GPIO_CONFIG_INPUT) { + return -EINVAL; + } + + if (config != PCF50633_GPIO_CONFIG_INPUT) { + reg = PCF50633_REG_GPIOCFG(gpio); + ret = pcf50633_reg_set_bit_mask(pcf, reg, 0x0f, config); + } + + return ret; +} +EXPORT_SYMBOL_GPL(pcf50633_gpio_set_config); + +int pcf50633_gpio_power_supply_set(struct pcf50633 *pcf, + int gpio, int regulator, int on) +{ + u8 reg, val, mask; + + gpio -= pcf->pdata->gpio_base; + + /* the *ENA register is always one after the *OUT register */ + reg = pcf50633_regulator_registers[regulator] + 1; + + val = !!on << (gpio - PCF50633_GPIO1); + mask = 1 << (gpio - PCF50633_GPIO1); + + return pcf50633_reg_set_bit_mask(pcf, reg, mask, val); +} +EXPORT_SYMBOL_GPL(pcf50633_gpio_power_supply_set); + + +static int __devinit pcf50633_gpio_probe(struct platform_device *pdev) +{ + struct pcf50633 *pcf = dev_to_pcf50633(pdev->dev.parent); + struct pcf50633_gpio *pcf_gpio; + + pcf_gpio = kzalloc(sizeof(*pcf_gpio), GFP_KERNEL); + + if (!pcf_gpio) + return -ENOMEM; + + pcf_gpio->pcf = pcf; + + pcf_gpio->chip.direction_input = pcf50633_gpio_direction_input; + pcf_gpio->chip.direction_output = pcf50633_gpio_direction_output; + pcf_gpio->chip.get = pcf50633_gpio_get_value; + pcf_gpio->chip.set = pcf50633_gpio_set_value; + + pcf_gpio->chip.base = pcf->pdata->gpio_base; + pcf_gpio->chip.ngpio = 4; + pcf_gpio->chip.label = dev_name(pcf->dev); + pcf_gpio->chip.can_sleep = 1; + pcf_gpio->chip.owner = THIS_MODULE; + pcf_gpio->chip.dev = &pdev->dev; + + platform_set_drvdata(pdev, pcf_gpio); + + return gpiochip_add(&pcf_gpio->chip); +} + +static int __devexit pcf50633_gpio_remove(struct platform_device *pdev) +{ + struct pcf50633_gpio *pcf_gpio = platform_get_drvdata(pdev); + + gpiochip_remove(&pcf_gpio->chip); + + platform_set_drvdata(pdev, NULL); + kfree(pcf_gpio); + + return 0; +} + +static struct platform_driver pcf50633_gpio_driver = { + .probe = pcf50633_gpio_probe, + .remove = __devexit_p(pcf50633_gpio_remove), + .driver = { + .name = "pcf50633-gpio", + .owner = THIS_MODULE, + }, +}; + +int __init pcf50633_gpio_init(void) +{ + return platform_driver_register(&pcf50633_gpio_driver); +} +module_init(pcf50633_gpio_init); + +void __exit pcf50633_gpio_exit(void) +{ + platform_driver_unregister(&pcf50633_gpio_driver); +} +module_exit(pcf50633_gpio_exit); + +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("GPIO driver for the PCF50633"); +MODULE_LICENSE("GPL"); diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index da3fa8dcdf5..ee9c7085664 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -26,8 +26,8 @@ struct led_pwm_data { struct led_classdev cdev; struct pwm_device *pwm; - unsigned int active_low; - unsigned int period; + struct led_pwm *led; + struct device *parent; }; static void led_pwm_set(struct led_classdev *led_cdev, @@ -35,8 +35,13 @@ static void led_pwm_set(struct led_classdev *led_cdev, { struct led_pwm_data *led_dat = container_of(led_cdev, struct led_pwm_data, cdev); + struct device *parent = led_dat->parent; + struct led_pwm_platform_data *pdata = parent->platform_data; unsigned int max = led_dat->cdev.max_brightness; - unsigned int period = led_dat->period; + unsigned int period = led_dat->led->pwm_period_ns; + + if (pdata->notify) + brightness = pdata->notify(parent, led_dat->led, brightness); if (brightness == 0) { pwm_config(led_dat->pwm, 0, period); @@ -76,18 +81,28 @@ static int led_pwm_probe(struct platform_device *pdev) led_dat->cdev.name = cur_led->name; led_dat->cdev.default_trigger = cur_led->default_trigger; - led_dat->active_low = cur_led->active_low; - led_dat->period = cur_led->pwm_period_ns; led_dat->cdev.brightness_set = led_pwm_set; led_dat->cdev.brightness = LED_OFF; led_dat->cdev.max_brightness = cur_led->max_brightness; led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; + led_dat->led = cur_led; + led_dat->parent = &pdev->dev; + ret = led_classdev_register(&pdev->dev, &led_dat->cdev); if (ret < 0) { pwm_free(led_dat->pwm); goto err; } + + if (pdata->init) { + ret = pdata->init(&pdev->dev, cur_led); + if (ret < 0) { + led_classdev_unregister(&led_dat->cdev); + pwm_free(led_dat->pwm); + goto err; + } + } } platform_set_drvdata(pdev, leds_data); @@ -97,6 +112,8 @@ static int led_pwm_probe(struct platform_device *pdev) err: if (i > 0) { for (i = i - 1; i >= 0; i--) { + if (pdata->exit) + pdata->exit(&pdev->dev, &pdata->leds[i]); led_classdev_unregister(&leds_data[i].cdev); pwm_free(leds_data[i].pwm); } @@ -116,6 +133,8 @@ static int __devexit led_pwm_remove(struct platform_device *pdev) leds_data = platform_get_drvdata(pdev); for (i = 0; i < pdata->num_leds; i++) { + if (pdata->exit) + pdata->exit(&pdev->dev, &pdata->leds[i]); led_classdev_unregister(&leds_data[i].cdev); pwm_free(leds_data[i].pwm); } diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 2a5a0b78f84..8e615af44b5 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -334,13 +334,6 @@ config PCF50633_ADC Say yes here if you want to include support for ADC in the NXP PCF50633 chip. -config PCF50633_GPIO - tristate "Support for NXP PCF50633 GPIO" - depends on MFD_PCF50633 - help - Say yes here if you want to include support GPIO for pins on - the PCF50633 chip. - config AB3100_CORE bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" depends on I2C=y @@ -398,6 +391,7 @@ config LPC_SCH help LPC bridge function of the Intel SCH provides support for System Management Bus and General Purpose I/O. +source "drivers/mfd/glamo/Kconfig" endmenu diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 22715add99a..86481d20c20 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o obj-$(CONFIG_MFD_SM501) += sm501.o obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o obj-$(CONFIG_MFD_SH_MOBILE_SDHI) += sh_mobile_sdhi.o +obj-$(CONFIG_MFD_GLAMO) += glamo/ obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o @@ -54,12 +55,12 @@ obj-$(CONFIG_PMIC_DA903X) += da903x.o max8925-objs := max8925-core.o max8925-i2c.o obj-$(CONFIG_MFD_MAX8925) += max8925.o -obj-$(CONFIG_MFD_PCF50633) += pcf50633-core.o +pcf50633-objs := pcf50633-core.o pcf50633-irq.o +obj-$(CONFIG_MFD_PCF50633) += pcf50633.o obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o -obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o obj-$(CONFIG_AB3100_CORE) += ab3100-core.o obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o obj-$(CONFIG_AB4500_CORE) += ab4500-core.o obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o obj-$(CONFIG_PMIC_ADP5520) += adp5520.o -obj-$(CONFIG_LPC_SCH) += lpc_sch.o
\ No newline at end of file +obj-$(CONFIG_LPC_SCH) += lpc_sch.o diff --git a/drivers/mfd/glamo/Kconfig b/drivers/mfd/glamo/Kconfig new file mode 100644 index 00000000000..3aa4831a4ff --- /dev/null +++ b/drivers/mfd/glamo/Kconfig @@ -0,0 +1,42 @@ +config MFD_GLAMO + bool "Smedia Glamo 336x/337x support" + select MFD_CORE + help + This enables the core driver for the Smedia Glamo 336x/337x + multi-function device. It includes irq_chip demultiplex as + well as clock / power management and GPIO support. + +config MFD_GLAMO_FB + tristate "Smedia Glamo 336x/337x framebuffer support" + depends on FB && MFD_GLAMO + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + help + Frame buffer driver for the LCD controller in the Smedia Glamo + 336x/337x. + + This driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called glamofb. If you want to compile it as a module, + say M here and read <file:Documentation/modules.txt>. + + If unsure, say N. + +config MFD_GLAMO_GPIO + tristate "Glamo GPIO support" + depends on MFD_GLAMO + + help + Enable a bitbanging SPI adapter driver for the Smedia Glamo. + +config MFD_GLAMO_MCI + tristate "Glamo S3C SD/MMC Card Interface support" + depends on MFD_GLAMO && MMC && REGULATOR + select CRC7 + help + This selects a driver for the MCI interface found in + the S-Media GLAMO chip, as used in Openmoko + neo1973 GTA-02. + + If unsure, say N. diff --git a/drivers/mfd/glamo/Makefile b/drivers/mfd/glamo/Makefile new file mode 100644 index 00000000000..ebf26f7e473 --- /dev/null +++ b/drivers/mfd/glamo/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the Smedia Glamo framebuffer driver +# + +obj-$(CONFIG_MFD_GLAMO) += glamo-core.o +obj-$(CONFIG_MFD_GLAMO_GPIO) += glamo-gpio.o +obj-$(CONFIG_MFD_GLAMO_SPI) += glamo-spi.o + +obj-$(CONFIG_MFD_GLAMO_FB) += glamo-fb.o +obj-$(CONFIG_MFD_GLAMO_MCI) += glamo-mci.o + diff --git a/drivers/mfd/glamo/glamo-core.c b/drivers/mfd/glamo/glamo-core.c new file mode 100644 index 00000000000..23073fedea2 --- /dev/null +++ b/drivers/mfd/glamo/glamo-core.c @@ -0,0 +1,1289 @@ +/* Smedia Glamo 3362 driver + * + * (C) 2007 by Openmoko, Inc. + * Author: Harald Welte <laforge@openmoko.org> + * (C) 2009, Lars-Peter Clausen <lars@metafoo.de> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/platform_device.h> +#include <linux/kernel_stat.h> +#include <linux/spinlock.h> +#include <linux/mfd/core.h> +#include <linux/mfd/glamo.h> +#include <linux/io.h> +#include <linux/slab.h> + +#include <linux/pm.h> + +#include "glamo-regs.h" +#include "glamo-core.h" + +#define GLAMO_MEM_REFRESH_COUNT 0x100 + +#define GLAMO_NR_IRQS 9 + +#define GLAMO_IRQ_HOSTBUS 0 +#define GLAMO_IRQ_JPEG 1 +#define GLAMO_IRQ_MPEG 2 +#define GLAMO_IRQ_MPROC1 3 +#define GLAMO_IRQ_MPROC0 4 +#define GLAMO_IRQ_CMDQUEUE 5 +#define GLAMO_IRQ_2D 6 +#define GLAMO_IRQ_MMC 7 +#define GLAMO_IRQ_RISC 8 + +/* + * Glamo internal settings + * + * We run the memory interface from the faster PLLB on 2.6.28 kernels and + * above. Couple of GTA02 users report trouble with memory bus when they + * upgraded from 2.6.24. So this parameter allows reversion to 2.6.24 + * scheme if their Glamo chip needs it. + * + * you can override the faster default on kernel commandline using + * + * glamo3362.slow_memory=1 + * + * for example + */ + +static int slow_memory; +module_param(slow_memory, int, 0644); + +struct reg_range { + int start; + int count; + char *name; + unsigned dump:1; +}; + +static const struct reg_range reg_range[] = { + { 0x0000, 0x76, "General", 1 }, + { 0x0200, 0x18, "Host Bus", 1 }, + { 0x0300, 0x38, "Memory", 1 }, +/* { 0x0400, 0x100, "Sensor", 0 }, */ +/* { 0x0500, 0x300, "ISP", 0 }, */ +/* { 0x0800, 0x400, "JPEG", 0 }, */ +/* { 0x0c00, 0xcc, "MPEG", 0 }, */ + { 0x1100, 0xb2, "LCD 1", 1 }, + { 0x1200, 0x64, "LCD 2", 1 }, + { 0x1400, 0x42, "MMC", 1 }, +/* { 0x1500, 0x080, "MPU 0", 0 }, + { 0x1580, 0x080, "MPU 1", 0 }, + { 0x1600, 0x080, "Cmd Queue", 0 }, + { 0x1680, 0x080, "RISC CPU", 0 },*/ + { 0x1700, 0x400, "2D Unit", 1 }, +/* { 0x1b00, 0x900, "3D Unit", 0 }, */ +}; + +static inline void __reg_write(struct glamo_core *glamo, + uint16_t reg, uint16_t val) +{ + writew(val, glamo->base + reg); +} + +void glamo_reg_write(struct glamo_core *glamo, + uint16_t reg, uint16_t val) +{ + spin_lock(&glamo->lock); + __reg_write(glamo, reg, val); + spin_unlock(&glamo->lock); +} +EXPORT_SYMBOL_GPL(glamo_reg_write); + + +static inline uint16_t __reg_read(struct glamo_core *glamo, + uint16_t reg) +{ + return readw(glamo->base + reg); +} + +uint16_t glamo_reg_read(struct glamo_core *glamo, uint16_t reg) +{ + uint16_t val; + spin_lock(&glamo->lock); + val = __reg_read(glamo, reg); + spin_unlock(&glamo->lock); + + return val; +} +EXPORT_SYMBOL_GPL(glamo_reg_read); + +static void __reg_set_bit_mask(struct glamo_core *glamo, + uint16_t reg, uint16_t mask, + uint16_t val) +{ + uint16_t tmp; + + val &= mask; + + tmp = __reg_read(glamo, reg); + tmp &= ~mask; + tmp |= val; + __reg_write(glamo, reg, tmp); +} + +static void reg_set_bit_mask(struct glamo_core *glamo, + uint16_t reg, uint16_t mask, + uint16_t val) +{ + spin_lock(&glamo->lock); + __reg_set_bit_mask(glamo, reg, mask, val); + spin_unlock(&glamo->lock); +} + +static inline void __reg_set_bit(struct glamo_core *glamo, + uint16_t reg, uint16_t bit) +{ + uint16_t tmp; + tmp = __reg_read(glamo, reg); + tmp |= bit; + __reg_write(glamo, reg, tmp); +} + +static inline void __reg_clear_bit(struct glamo_core *glamo, + uint16_t reg, uint16_t bit) +{ + uint16_t tmp; + tmp = __reg_read(glamo, reg); + tmp &= ~bit; + __reg_write(glamo, reg, tmp); +} + +static void __reg_write_batch(struct glamo_core *glamo, uint16_t reg, + uint16_t count, uint16_t *values) +{ + uint16_t end; + for (end = reg + count * 2; reg < end; reg += 2, ++values) + __reg_write(glamo, reg, *values); +} + +static void __reg_read_batch(struct glamo_core *glamo, uint16_t reg, + uint16_t count, uint16_t *values) +{ + uint16_t end; + for (end = reg + count * 2; reg < end; reg += 2, ++values) + *values = __reg_read(glamo, reg); +} + +void glamo_reg_write_batch(struct glamo_core *glamo, uint16_t reg, + uint16_t count, uint16_t *values) +{ + spin_lock(&glamo->lock); + __reg_write_batch(glamo, reg, count, values); + spin_unlock(&glamo->lock); +} +EXPORT_SYMBOL(glamo_reg_write_batch); + +void glamo_reg_read_batch(struct glamo_core *glamo, uint16_t reg, + uint16_t count, uint16_t *values) +{ + spin_lock(&glamo->lock); + __reg_read_batch(glamo, reg, count, values); + spin_unlock(&glamo->lock); +} +EXPORT_SYMBOL(glamo_reg_read_batch); + +/*********************************************************************** + * resources of sibling devices + ***********************************************************************/ + +static struct resource glamo_fb_resources[] = { + { + .name = "glamo-fb-regs", + .start = GLAMO_REGOFS_LCD, + .end = GLAMO_REGOFS_MMC - 1, + .flags = IORESOURCE_MEM, + }, { + .name = "glamo-fb-mem", + .start = GLAMO_OFFSET_FB, + .end = GLAMO_OFFSET_FB + GLAMO_FB_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource glamo_mmc_resources[] = { + { + .name = "glamo-mmc-regs", + .start = GLAMO_REGOFS_MMC, + .end = GLAMO_REGOFS_MPROC0 - 1, + .flags = IORESOURCE_MEM + }, { + .name = "glamo-mmc-mem", + .start = GLAMO_OFFSET_FB + GLAMO_FB_SIZE, + .end = GLAMO_OFFSET_FB + GLAMO_FB_SIZE + + GLAMO_MMC_BUFFER_SIZE - 1, + .flags = IORESOURCE_MEM + }, { + .start = GLAMO_IRQ_MMC, + .end = GLAMO_IRQ_MMC, + .flags = IORESOURCE_IRQ, + }, +}; + +enum glamo_cells { + GLAMO_CELL_FB, + GLAMO_CELL_MMC, + GLAMO_CELL_GPIO, +}; + +static const struct mfd_cell glamo_cells[] = { + [GLAMO_CELL_FB] = { + .name = "glamo-fb", + .num_resources = ARRAY_SIZE(glamo_fb_resources), + .resources = glamo_fb_resources, + }, + [GLAMO_CELL_MMC] = { + .name = "glamo-mci", + .num_resources = ARRAY_SIZE(glamo_mmc_resources), + .resources = glamo_mmc_resources, + }, + [GLAMO_CELL_GPIO] = { + .name = "glamo-gpio", + }, +}; + +/*********************************************************************** + * IRQ demultiplexer + ***********************************************************************/ +#define glamo_irq_bit(glamo, x) BIT(x - glamo->irq_base) + +static inline struct glamo_core *irq_to_glamo(unsigned int irq) +{ + return (struct glamo_core *)get_irq_chip_data(irq); +} + +static void glamo_ack_irq(unsigned int irq) +{ + struct glamo_core *glamo = irq_to_glamo(irq); + /* clear interrupt source */ + __reg_write(glamo, GLAMO_REG_IRQ_CLEAR, glamo_irq_bit(glamo, irq)); +} + +static void glamo_mask_irq(unsigned int irq) +{ + struct glamo_core *glamo = irq_to_glamo(irq); + + /* clear bit in enable register */ + __reg_clear_bit(glamo, GLAMO_REG_IRQ_ENABLE, glamo_irq_bit(glamo, irq)); +} + +static void glamo_unmask_irq(unsigned int irq) +{ + struct glamo_core *glamo = irq_to_glamo(irq); + + /* set bit in enable register */ + __reg_set_bit(glamo, GLAMO_REG_IRQ_ENABLE, glamo_irq_bit(glamo, irq)); +} + +static struct irq_chip glamo_irq_chip = { + .name = "glamo", + .ack = glamo_ack_irq, + .mask = glamo_mask_irq, + .unmask = glamo_unmask_irq, +}; + +static void glamo_irq_demux_handler(unsigned int irq, struct irq_desc *desc) +{ + struct glamo_core *glamo = get_irq_desc_data(desc); + desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); + + if (unlikely(desc->status & IRQ_INPROGRESS)) { + desc->status |= (IRQ_PENDING | IRQ_MASKED); + desc->chip->mask(irq); + desc->chip->ack(irq); + return; + } + kstat_incr_irqs_this_cpu(irq, desc); + + desc->chip->ack(irq); + desc->status |= IRQ_INPROGRESS; + + do { + uint16_t irqstatus; + int i; + + if (unlikely((desc->status & + (IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) == + (IRQ_PENDING | IRQ_MASKED))) { + /* dealing with pending IRQ, unmasking */ + desc->chip->unmask(irq); + desc->status &= ~IRQ_MASKED; + } + + desc->status &= ~IRQ_PENDING; + + /* read IRQ status register */ + irqstatus = __reg_read(glamo, GLAMO_REG_IRQ_STATUS); + for (i = 0; i < 9; ++i) { + if (irqstatus & BIT(i)) + generic_handle_irq(glamo->irq_base + i); + } + + } while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING); + + desc->status &= ~IRQ_INPROGRESS; +} + +/* +sysfs +*/ + +static ssize_t regs_write(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct glamo_core *glamo = dev_get_drvdata(dev); + unsigned int reg; + unsigned int val; + + sscanf(buf, "%u %u", ®, &val); + printk(KERN_INFO"reg 0x%02x <-- 0x%04x\n", + reg, val); + + glamo_reg_write(glamo, reg, val); + + return count; +} + +static ssize_t regs_read(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct glamo_core *glamo = dev_get_drvdata(dev); + int i, n; + char *end = buf; + const struct reg_range *rr = reg_range; + + spin_lock(&glamo->lock); + + for (i = 0; i < ARRAY_SIZE(reg_range); ++i, ++rr) { + if (!rr->dump) + continue; + end += sprintf(end, "\n%s\n", rr->name); + for (n = rr->start; n < rr->start + rr->count; n += 2) { + if ((n & 15) == 0) + end += sprintf(end, "\n%04X: ", n); + end += sprintf(end, "%04x ", __reg_read(glamo, n)); + } + end += sprintf(end, "\n"); + } + spin_unlock(&glamo->lock); + + return end - buf; +} + +static DEVICE_ATTR(regs, 0644, regs_read, regs_write); + +struct glamo_engine_reg_set { + uint16_t reg; + uint16_t mask_suspended; + uint16_t mask_enabled; +}; + +struct glamo_engine_desc { + const char *name; + uint16_t hostbus; + const struct glamo_engine_reg_set *regs; + int num_regs; +}; + +static const struct glamo_engine_reg_set glamo_lcd_regs[] = { + { GLAMO_REG_CLOCK_LCD, + GLAMO_CLOCK_LCD_EN_M5CLK | + GLAMO_CLOCK_LCD_DG_M5CLK | + GLAMO_CLOCK_LCD_EN_DMCLK, + + GLAMO_CLOCK_LCD_EN_DHCLK | + GLAMO_CLOCK_LCD_EN_DCLK + }, + { GLAMO_REG_CLOCK_GEN5_1, + GLAMO_CLOCK_GEN51_EN_DIV_DMCLK, + + GLAMO_CLOCK_GEN51_EN_DIV_DHCLK | + GLAMO_CLOCK_GEN51_EN_DIV_DCLK + } +}; + +static const struct glamo_engine_reg_set glamo_mmc_regs[] = { + { GLAMO_REG_CLOCK_MMC, + GLAMO_CLOCK_MMC_EN_M9CLK | + GLAMO_CLOCK_MMC_DG_M9CLK, + + GLAMO_CLOCK_MMC_EN_TCLK | + GLAMO_CLOCK_MMC_DG_TCLK + }, + { GLAMO_REG_CLOCK_GEN5_1, + 0, + GLAMO_CLOCK_GEN51_EN_DIV_TCLK + } +}; + +static const struct glamo_engine_reg_set glamo_2d_regs[] = { + { GLAMO_REG_CLOCK_2D, + GLAMO_CLOCK_2D_EN_M7CLK | + GLAMO_CLOCK_2D_DG_M7CLK, + + GLAMO_CLOCK_2D_EN_GCLK | + GLAMO_CLOCK_2D_DG_GCLK + }, + { GLAMO_REG_CLOCK_GEN5_1, + 0, + GLAMO_CLOCK_GEN51_EN_DIV_GCLK, + } +}; + +static const struct glamo_engine_reg_set glamo_cmdq_regs[] = { + { GLAMO_REG_CLOCK_2D, + GLAMO_CLOCK_2D_EN_M6CLK, + 0 + }, +}; + +#define GLAMO_ENGINE(xname, xhostbus, xregs) { \ + .name = xname, \ + .hostbus = xhostbus, \ + .num_regs = ARRAY_SIZE(xregs), \ + .regs = xregs, \ +} + +static const struct glamo_engine_desc glamo_engines[] = { + [GLAMO_ENGINE_LCD] = GLAMO_ENGINE("LCD", GLAMO_HOSTBUS2_MMIO_EN_LCD, + glamo_lcd_regs), + [GLAMO_ENGINE_MMC] = GLAMO_ENGINE("MMC", GLAMO_HOSTBUS2_MMIO_EN_MMC, + glamo_mmc_regs), + [GLAMO_ENGINE_2D] = GLAMO_ENGINE("2D", GLAMO_HOSTBUS2_MMIO_EN_2D, + glamo_2d_regs), + [GLAMO_ENGINE_CMDQ] = GLAMO_ENGINE("CMDQ", GLAMO_HOSTBUS2_MMIO_EN_CQ, + glamo_cmdq_regs), +}; + +static inline const char *glamo_engine_name(enum glamo_engine engine) +{ + return glamo_engines[engine].name; +} + +/*********************************************************************** + * 'engine' support + ***********************************************************************/ + +int __glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine) +{ + int i; + const struct glamo_engine_desc *engine_desc = &glamo_engines[engine]; + const struct glamo_engine_reg_set *reg; + + switch (engine) { + case GLAMO_ENGINE_LCD: + case GLAMO_ENGINE_MMC: + case GLAMO_ENGINE_2D: + case GLAMO_ENGINE_CMDQ: + break; + default: + return -EINVAL; + } + + reg = engine_desc->regs; + + __reg_set_bit(glamo, GLAMO_REG_HOSTBUS(2), + engine_desc->hostbus); + for (i = engine_desc->num_regs; i; --i, ++reg) + __reg_set_bit(glamo, reg->reg, + reg->mask_suspended | reg->mask_enabled); + + return 0; +} + +int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine) +{ + int ret = 0; + + spin_lock(&glamo->lock); + + if (glamo->engine_state[engine] != GLAMO_ENGINE_ENABLED) { + ret = __glamo_engine_enable(glamo, engine); + if (!ret) + glamo->engine_state[engine] = GLAMO_ENGINE_ENABLED; + } + + spin_unlock(&glamo->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(glamo_engine_enable); + +int __glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine) +{ + int i; + const struct glamo_engine_desc *engine_desc = &glamo_engines[engine]; + const struct glamo_engine_reg_set *reg; + + switch (engine) { + case GLAMO_ENGINE_LCD: + case GLAMO_ENGINE_MMC: + case GLAMO_ENGINE_2D: + case GLAMO_ENGINE_CMDQ: + break; + default: + return -EINVAL; + } + + reg = engine_desc->regs; + + __reg_clear_bit(glamo, GLAMO_REG_HOSTBUS(2), + engine_desc->hostbus); + for (i = engine_desc->num_regs; i; --i, ++reg) + __reg_clear_bit(glamo, reg->reg, + reg->mask_suspended | reg->mask_enabled); + + return 0; +} +int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine) +{ + int ret = 0; + + spin_lock(&glamo->lock); + + if (glamo->engine_state[engine] != GLAMO_ENGINE_DISABLED) { + ret = __glamo_engine_disable(glamo, engine); + if (!ret) + glamo->engine_state[engine] = GLAMO_ENGINE_DISABLED; + } + + spin_unlock(&glamo->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(glamo_engine_disable); + +int __glamo_engine_suspend(struct glamo_core *glamo, enum glamo_engine engine) +{ + int i; + const struct glamo_engine_desc *engine_desc = &glamo_engines[engine]; + const struct glamo_engine_reg_set *reg; + + switch (engine) { + case GLAMO_ENGINE_LCD: + case GLAMO_ENGINE_MMC: + case GLAMO_ENGINE_2D: + case GLAMO_ENGINE_CMDQ: + break; + default: + return -EINVAL; + } + + reg = engine_desc->regs; + + __reg_set_bit(glamo, GLAMO_REG_HOSTBUS(2), + engine_desc->hostbus); + for (i = engine_desc->num_regs; i; --i, ++reg) { + __reg_set_bit(glamo, reg->reg, reg->mask_suspended); + __reg_clear_bit(glamo, reg->reg, reg->mask_enabled); + } + + return 0; +} + +int glamo_engine_suspend(struct glamo_core *glamo, enum glamo_engine engine) +{ + int ret = 0; + + spin_lock(&glamo->lock); + + if (glamo->engine_state[engine] != GLAMO_ENGINE_SUSPENDED) { + ret = __glamo_engine_suspend(glamo, engine); + if (!ret) + glamo->engine_state[engine] = GLAMO_ENGINE_SUSPENDED; + } + + spin_unlock(&glamo->lock); + + return ret; +} +EXPORT_SYMBOL_GPL(glamo_engine_suspend); + +static const struct glamo_script reset_regs[] = { + [GLAMO_ENGINE_LCD] = { + GLAMO_REG_CLOCK_LCD, GLAMO_CLOCK_LCD_RESET + }, + [GLAMO_ENGINE_MMC] = { + GLAMO_REG_CLOCK_MMC, GLAMO_CLOCK_MMC_RESET + }, + [GLAMO_ENGINE_CMDQ] = { + GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_CQ_RESET + }, + [GLAMO_ENGINE_2D] = { + GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_RESET + }, + [GLAMO_ENGINE_JPEG] = { + GLAMO_REG_CLOCK_JPEG, GLAMO_CLOCK_JPEG_RESET + }, +}; + +void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine) +{ + uint16_t reg = reset_regs[engine].reg; + uint16_t val = reset_regs[engine].val; + + if (engine >= ARRAY_SIZE(reset_regs)) { + dev_warn(&glamo->pdev->dev, "unknown engine %u ", engine); + return; + } + + spin_lock(&glamo->lock); + __reg_set_bit(glamo, reg, val); + __reg_clear_bit(glamo, reg, val); + spin_unlock(&glamo->lock); +} +EXPORT_SYMBOL_GPL(glamo_engine_reset); + +int glamo_pll_rate(struct glamo_core *glamo, + enum glamo_pll pll) +{ + uint16_t reg; + unsigned int osci = glamo->pdata->osci_clock_rate; + + switch (pll) { + case GLAMO_PLL1: + reg = __reg_read(glamo, GLAMO_REG_PLL_GEN1); + break; + case GLAMO_PLL2: + reg = __reg_read(glamo, GLAMO_REG_PLL_GEN3); + break; + default: + return -EINVAL; + } + + return (int)osci * (int)reg; +} +EXPORT_SYMBOL_GPL(glamo_pll_rate); + +int glamo_engine_reclock(struct glamo_core *glamo, + enum glamo_engine engine, + int hz) +{ + int pll; + uint16_t reg, mask, div; + + if (!hz) + return -EINVAL; + + switch (engine) { + case GLAMO_ENGINE_LCD: + pll = GLAMO_PLL1; + reg = GLAMO_REG_CLOCK_GEN7; + mask = 0xff; + break; + case GLAMO_ENGINE_MMC: + pll = GLAMO_PLL1; + reg = GLAMO_REG_CLOCK_GEN8; + mask = 0xff; + break; + default: + dev_warn(&glamo->pdev->dev, + "reclock of engine 0x%x not supported\n", engine); + return -EINVAL; + break; + } + + pll = glamo_pll_rate(glamo, pll); + + div = pll / hz; + + if (div != 0 && pll / div <= hz) + --div; + + if (div > mask) + div = mask; + + dev_dbg(&glamo->pdev->dev, + "PLL %d, kHZ %d, div %d\n", pll, hz / 1000, div); + + reg_set_bit_mask(glamo, reg, mask, div); + mdelay(5); /* wait some time to stabilize */ + + return pll / (div + 1); +} +EXPORT_SYMBOL_GPL(glamo_engine_reclock); + +/*********************************************************************** + * script support + ***********************************************************************/ + +#define GLAMO_SCRIPT_END 0xffff +#define GLAMO_SCRIPT_WAIT 0xfffe +#define GLAMO_SCRIPT_LOCK_PLL 0xfffd + +/* + * couple of people reported artefacts with 2.6.28 changes, this + * allows reversion to 2.6.24 settings +*/ +static const uint16_t reg_0x200[] = { +0xe03, /* 0 waits on Async BB R & W, Use PLL 2 for mem bus */ +0xef0, /* 3 waits on Async BB R & W, Use PLL 1 for mem bus */ +0xea0, /* 2 waits on Async BB R & W, Use PLL 1 for mem bus */ +0xe50, /* 1 waits on Async BB R & W, Use PLL 1 for mem bus */ +0xe00, /* 0 waits on Async BB R & W, Use PLL 1 for mem bus */ +0xef3, /* 3 waits on Async BB R & W, Use PLL 2 for mem bus */ +0xea3, /* 2 waits on Async BB R & W, Use PLL 2 for mem bus */ +0xe53, /* 1 waits on Async BB R & W, Use PLL 2 for mem bus */ +}; + +static int glamo_run_script(struct glamo_core *glamo, + const struct glamo_script *script, int len, + int may_sleep) +{ + int i; + uint16_t status; + const struct glamo_script *line = script; + + for (i = 0; i < len; ++i, ++line) { + switch (line->reg) { + case GLAMO_SCRIPT_END: + return 0; + case GLAMO_SCRIPT_WAIT: + if (may_sleep) + msleep(line->val); + else + mdelay(line->val * 4); + break; + case GLAMO_SCRIPT_LOCK_PLL: + /* spin until PLLs lock */ + do { + status = __reg_read(glamo, GLAMO_REG_PLL_GEN5); + } while ((status & 3) != 3); + break; + case 0x200: + __reg_write(glamo, line->reg, + reg_0x200[slow_memory & 0x8]); + break; + default: + __reg_write(glamo, line->reg, line->val); + break; + } + } + + return 0; +} + +static const struct glamo_script glamo_init_script[] = { + { GLAMO_REG_CLOCK_HOST, 0x1000 }, + { GLAMO_SCRIPT_WAIT, 2 }, + { GLAMO_REG_CLOCK_MEMORY, 0x1000 }, + { GLAMO_REG_CLOCK_MEMORY, 0x2000 }, + { GLAMO_REG_CLOCK_LCD, 0x1000 }, + { GLAMO_REG_CLOCK_MMC, 0x1000 }, + { GLAMO_REG_CLOCK_ISP, 0x1000 }, + { GLAMO_REG_CLOCK_ISP, 0x3000 }, + { GLAMO_REG_CLOCK_JPEG, 0x1000 }, + { GLAMO_REG_CLOCK_3D, 0x1000 }, + { GLAMO_REG_CLOCK_3D, 0x3000 }, + { GLAMO_REG_CLOCK_2D, 0x1000 }, + { GLAMO_REG_CLOCK_2D, 0x3000 }, + { GLAMO_REG_CLOCK_RISC1, 0x1000 }, + { GLAMO_REG_CLOCK_MPEG, 0x1000 }, + { GLAMO_REG_CLOCK_MPEG, 0x3000 }, + { GLAMO_REG_CLOCK_MPROC, 0x1000 /*0x100f*/ }, + { GLAMO_SCRIPT_WAIT, 2 }, + { GLAMO_REG_CLOCK_HOST, 0x0000 }, + { GLAMO_REG_CLOCK_MEMORY, 0x0000 }, + { GLAMO_REG_CLOCK_LCD, 0x0000 }, + { GLAMO_REG_CLOCK_MMC, 0x0000 }, + { GLAMO_REG_PLL_GEN1, 0x05db }, /* 48MHz */ + { GLAMO_REG_PLL_GEN3, 0x0aba }, /* 90MHz */ + { GLAMO_SCRIPT_LOCK_PLL, 0 }, + /* + * b9 of this register MUST be zero to get any interrupts on INT# + * the other set bits enable all the engine interrupt sources + */ + { GLAMO_REG_IRQ_ENABLE, 0x0100 }, + { GLAMO_REG_CLOCK_GEN6, 0x2000 }, + { GLAMO_REG_CLOCK_GEN7, 0x0101 }, + { GLAMO_REG_CLOCK_GEN8, 0x0100 }, + { GLAMO_REG_CLOCK_HOST, 0x000d }, + /* + * b7..b4 = 0 = no wait states on read or write + * b0 = 1 select PLL2 for Host interface, b1 = enable it + */ + { GLAMO_REG_HOSTBUS(0), 0x0e03 /* this is replaced by script parser */ }, + { GLAMO_REG_HOSTBUS(1), 0x07ff }, /* TODO: Disable all */ + { GLAMO_REG_HOSTBUS(10), 0x0000 }, + { GLAMO_REG_HOSTBUS(11), 0x4000 }, + { GLAMO_REG_HOSTBUS(12), 0xf00e }, + + /* S-Media recommended "set tiling mode to 512 mode for memory access + * more efficiency when 640x480" */ + { GLAMO_REG_MEM_TYPE, 0x0c74 }, /* 8MB, 16 word pg wr+rd */ + { GLAMO_REG_MEM_GEN, 0xafaf }, /* 63 grants min + max */ + + { GLAMO_REG_MEM_TIMING1, 0x0108 }, + { GLAMO_REG_MEM_TIMING2, 0x0010 }, /* Taa = 3 MCLK */ + { GLAMO_REG_MEM_TIMING3, 0x0000 }, + { GLAMO_REG_MEM_TIMING4, 0x0000 }, /* CE1# delay fall/rise */ + { GLAMO_REG_MEM_TIMING5, 0x0000 }, /* UB# LB# */ + { GLAMO_REG_MEM_TIMING6, 0x0000 }, /* OE# */ + { GLAMO_REG_MEM_TIMING7, 0x0000 }, /* WE# */ + { GLAMO_REG_MEM_TIMING8, 0x1002 }, /* MCLK delay, was 0x1000 */ + { GLAMO_REG_MEM_TIMING9, 0x6006 }, + { GLAMO_REG_MEM_TIMING10, 0x00ff }, + { GLAMO_REG_MEM_TIMING11, 0x0001 }, + { GLAMO_REG_MEM_POWER1, 0x0020 }, + { GLAMO_REG_MEM_POWER2, 0x0000 }, + { GLAMO_REG_MEM_DRAM1, 0x0000 }, + { GLAMO_SCRIPT_WAIT, 1 }, + { GLAMO_REG_MEM_DRAM1, 0xc100 }, + { GLAMO_SCRIPT_WAIT, 1 }, + { GLAMO_REG_MEM_DRAM1, 0xe100 }, + { GLAMO_REG_MEM_DRAM2, 0x01d6 }, + { GLAMO_REG_CLOCK_MEMORY, 0x000b }, +}; + +/* Find out if we can support this version of the Glamo chip */ +static int __devinit glamo_supported(struct glamo_core *glamo) +{ + uint16_t dev_id, rev_id; + + dev_id = __reg_read(glamo, GLAMO_REG_DEVICE_ID); + rev_id = __reg_read(glamo, GLAMO_REG_REVISION_ID); + + switch (dev_id) { + case 0x3650: + switch (rev_id) { + case GLAMO_CORE_REV_A2: + break; + case GLAMO_CORE_REV_A0: + case GLAMO_CORE_REV_A1: + case GLAMO_CORE_REV_A3: + dev_warn(&glamo->pdev->dev, "untested core revision " + "%04x, your mileage may vary\n", rev_id); + break; + default: + dev_warn(&glamo->pdev->dev, "unknown glamo revision " + "%04x, your mileage may vary\n", rev_id); + } + break; + default: + dev_err(&glamo->pdev->dev, "unsupported Glamo device %04x\n", + dev_id); + return 0; + } + + dev_dbg(&glamo->pdev->dev, "Detected Glamo core %04x Revision %04x " + "(%uHz CPU / %uHz Memory)\n", dev_id, rev_id, + glamo_pll_rate(glamo, GLAMO_PLL1), + glamo_pll_rate(glamo, GLAMO_PLL2)); + + return 1; +} + +static int __devinit glamo_probe(struct platform_device *pdev) +{ + int ret = 0, irq, irq_base; + struct glamo_core *glamo; + struct resource *mem; + + glamo = kmalloc(GFP_KERNEL, sizeof(*glamo)); + if (!glamo) + return -ENOMEM; + + spin_lock_init(&glamo->lock); + + glamo->pdev = pdev; + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + glamo->irq = platform_get_irq(pdev, 0); + glamo->irq_base = irq_base = platform_get_irq(pdev, 1); + glamo->pdata = pdev->dev.platform_data; + + if (glamo->irq < 0) { + ret = glamo->irq; + dev_err(&pdev->dev, "Failed to get platform irq: %d\n", ret); + goto err_free; + } + + if (irq_base < 0) { + ret = glamo->irq; + dev_err(&pdev->dev, "Failed to get glamo irq base: %d\n", ret); + goto err_free; + } + + if (!mem) { + dev_err(&pdev->dev, "Failed to get platform memory\n"); + ret = -ENOENT; + goto err_free; + } + + if (!glamo->pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + ret = -ENOENT; + goto err_free; + } + + /* only request the generic, hostbus and memory controller registers */ + glamo->mem = request_mem_region(mem->start, GLAMO_REGOFS_VIDCAP, + pdev->name); + + if (!glamo->mem) { + dev_err(&pdev->dev, "Failed to request io memory region\n"); + ret = -ENOENT; + goto err_free; + } + + glamo->base = ioremap(glamo->mem->start, resource_size(glamo->mem)); + if (!glamo->base) { + dev_err(&pdev->dev, "Failed to ioremap() memory region\n"); + goto err_release_mem_region; + } + + /* confirm it isn't insane version */ + if (!glamo_supported(glamo)) { + dev_err(&pdev->dev, + "This version of the Glamo is not supported\n"); + goto err_iounmap; + } + + platform_set_drvdata(pdev, glamo); + + /* sysfs */ + ret = device_create_file(&pdev->dev, &dev_attr_regs); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to create sysfs file\n"); + goto err_iounmap; + } + + /* init the chip with canned register set */ + glamo_run_script(glamo, glamo_init_script, + ARRAY_SIZE(glamo_init_script), 1); + + /* + * finally set the mfd interrupts up + */ + for (irq = irq_base; irq < irq_base + GLAMO_NR_IRQS; ++irq) { +#ifdef CONFIG_ARM + set_irq_flags(irq, IRQF_VALID); +#else + set_irq_noprobe(irq); +#endif + set_irq_chip_data(irq, glamo); + set_irq_chip_and_handler(irq, &glamo_irq_chip, + handle_level_irq); + } + + set_irq_type(glamo->irq, IRQ_TYPE_EDGE_FALLING); + set_irq_data(glamo->irq, glamo); + set_irq_chained_handler(glamo->irq, glamo_irq_demux_handler); + glamo->irq_works = 1; + + ret = mfd_add_devices(&pdev->dev, pdev->id, glamo_cells, + ARRAY_SIZE(glamo_cells), mem, glamo->irq_base); + + if (ret) { + dev_err(&pdev->dev, "Failed to add child devices: %d\n", ret); + goto err_free_irqs; + } + + dev_info(&glamo->pdev->dev, "Glamo core PLL1: %uHz, PLL2: %uHz\n", + glamo_pll_rate(glamo, GLAMO_PLL1), + glamo_pll_rate(glamo, GLAMO_PLL2)); + + return 0; + +err_free_irqs: + disable_irq(glamo->irq); + set_irq_chained_handler(glamo->irq, NULL); + set_irq_chip_data(glamo->irq, NULL); + + for (irq = irq_base; irq < irq_base + GLAMO_NR_IRQS; ++irq) { + set_irq_chip(irq, NULL); +#ifdef CONFIG_ARM + set_irq_flags(irq, 0); +#else + set_irq_probe(irq); +#endif + set_irq_chip_data(irq, NULL); + } +err_iounmap: + iounmap(glamo->base); +err_release_mem_region: + release_mem_region(glamo->mem->start, resource_size(glamo->mem)); +err_free: + platform_set_drvdata(pdev, NULL); + kfree(glamo); + + return ret; +} + +static int __devexit glamo_remove(struct platform_device *pdev) +{ + struct glamo_core *glamo = platform_get_drvdata(pdev); + int irq; + int irq_base = glamo->irq_base; + + mfd_remove_devices(&pdev->dev); + + disable_irq(glamo->irq); + set_irq_chained_handler(glamo->irq, NULL); + set_irq_chip_data(glamo->irq, NULL); + + for (irq = irq_base; irq < irq_base + GLAMO_NR_IRQS; ++irq) { +#ifdef CONFIG_ARM + set_irq_flags(irq, 0); +#else + set_irq_noprobe(); +#endif + set_irq_chip(irq, NULL); + set_irq_chip_data(irq, NULL); + } + + platform_set_drvdata(pdev, NULL); + iounmap(glamo->base); + release_mem_region(glamo->mem->start, resource_size(glamo->mem)); + kfree(glamo); + + return 0; +} + +#ifdef CONFIG_PM +#if 0 +static struct glamo_script glamo_resume_script[] = { + + { GLAMO_REG_PLL_GEN1, 0x05db }, /* 48MHz */ + { GLAMO_REG_PLL_GEN3, 0x0aba }, /* 90MHz */ + { GLAMO_REG_DFT_GEN6, 1 }, + { 0xfffe, 100 }, + { 0xfffd, 0 }, + { 0x200, 0x0e03 }, + + /* + * b9 of this register MUST be zero to get any interrupts on INT# + * the other set bits enable all the engine interrupt sources + */ + { GLAMO_REG_IRQ_ENABLE, 0x01ff }, + { GLAMO_REG_CLOCK_HOST, 0x0018 }, + { GLAMO_REG_CLOCK_GEN5_1, 0x18b1 }, + + { GLAMO_REG_MEM_DRAM1, 0x0000 }, + { 0xfffe, 1 }, + { GLAMO_REG_MEM_DRAM1, 0xc100 }, + { 0xfffe, 1 }, + { GLAMO_REG_MEM_DRAM1, 0xe100 }, + { GLAMO_REG_MEM_DRAM2, 0x01d6 }, + { GLAMO_REG_CLOCK_MEMORY, 0x000b }, +}; +#endif + +#if 0 +static void glamo_power(struct glamo_core *glamo) +{ + unsigned long flags; + + spin_lock_irqsave(&glamo->lock, flags); + + /* +Power management +static const REG_VALUE_MASK_TYPE reg_powerOn[] = +{ + { REG_GEN_DFT6, REG_BIT_ALL, REG_DATA(1u << 0) }, + { REG_GEN_PLL3, 0u, REG_DATA(1u << 13) }, + { REG_GEN_MEM_CLK, REG_BIT_ALL, REG_BIT_EN_MOCACLK }, + { REG_MEM_DRAM2, 0u, REG_BIT_EN_DEEP_POWER_DOWN }, + { REG_MEM_DRAM1, 0u, REG_BIT_SELF_REFRESH } +}; + +static const REG_VALUE_MASK_TYPE reg_powerStandby[] = +{ + { REG_MEM_DRAM1, REG_BIT_ALL, REG_BIT_SELF_REFRESH }, + { REG_GEN_MEM_CLK, 0u, REG_BIT_EN_MOCACLK }, + { REG_GEN_PLL3, REG_BIT_ALL, REG_DATA(1u << 13) }, + { REG_GEN_DFT5, REG_BIT_ALL, REG_DATA(1u << 0) } +}; + +static const REG_VALUE_MASK_TYPE reg_powerSuspend[] = +{ + { REG_MEM_DRAM2, REG_BIT_ALL, REG_BIT_EN_DEEP_POWER_DOWN }, + { REG_GEN_MEM_CLK, 0u, REG_BIT_EN_MOCACLK }, + { REG_GEN_PLL3, REG_BIT_ALL, REG_DATA(1u << 13) }, + { REG_GEN_DFT5, REG_BIT_ALL, REG_DATA(1u << 0) } +}; +*/ + switch (new_state) { + case GLAMO_POWER_ON: + + /* + * glamo state on resume is nondeterministic in some + * fundamental way, it has also been observed that the + * Glamo reset pin can get asserted by, eg, touching it with + * a scope probe. So the only answer is to roll with it and + * force an external reset on the Glamo during resume. + */ + + + break; + + case GLAMO_POWER_SUSPEND: + + break; + } + spin_unlock_irqrestore(&glamo->lock, flags); +} +#endif + +static int glamo_suspend(struct device *dev) +{ + struct glamo_core *glamo = dev_get_drvdata(dev); + int n; + + spin_lock(&glamo->lock); + + glamo->saved_irq_mask = __reg_read(glamo, GLAMO_REG_IRQ_ENABLE); + + /* nuke interrupts */ + __reg_write(glamo, GLAMO_REG_IRQ_ENABLE, 0x200); + + /* take down each engine before we kill mem and pll */ + for (n = 0; n < __NUM_GLAMO_ENGINES; n++) { + if (glamo->engine_state != GLAMO_ENGINE_DISABLED) + __glamo_engine_disable(glamo, n); + } + + /* enable self-refresh */ + + __reg_write(glamo, GLAMO_REG_MEM_DRAM1, + GLAMO_MEM_DRAM1_EN_DRAM_REFRESH | + GLAMO_MEM_DRAM1_EN_GATE_CKE | + GLAMO_MEM_DRAM1_SELF_REFRESH | + GLAMO_MEM_REFRESH_COUNT); + __reg_write(glamo, GLAMO_REG_MEM_DRAM1, + GLAMO_MEM_DRAM1_EN_MODEREG_SET | + GLAMO_MEM_DRAM1_EN_DRAM_REFRESH | + GLAMO_MEM_DRAM1_EN_GATE_CKE | + GLAMO_MEM_DRAM1_SELF_REFRESH | + GLAMO_MEM_REFRESH_COUNT); + + /* force RAM into deep powerdown */ + __reg_write(glamo, GLAMO_REG_MEM_DRAM2, + GLAMO_MEM_DRAM2_DEEP_PWRDOWN | + (7 << 6) | /* tRC */ + (1 << 4) | /* tRP */ + (1 << 2) | /* tRCD */ + 2); /* CAS latency */ + + /* disable clocks to memory */ + __reg_write(glamo, GLAMO_REG_CLOCK_MEMORY, 0); + + /* all dividers from OSCI */ + __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1, 0x400, 0x400); + + /* PLL2 into bypass */ + __reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 12, 1 << 12); + + __reg_write(glamo, GLAMO_BASIC_MMC_EN_TCLK_DLYA1, 0x0e00); + + /* kill PLLS 1 then 2 */ + __reg_write(glamo, GLAMO_REG_DFT_GEN5, 0x0001); + __reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 13, 1 << 13); + + spin_unlock(&glamo->lock); + + return 0; +} + +static int glamo_resume(struct device *dev) +{ + struct glamo_core *glamo = dev_get_drvdata(dev); + int n; + + (glamo->pdata->glamo_external_reset)(0); + udelay(10); + (glamo->pdata->glamo_external_reset)(1); + mdelay(5); + + spin_lock(&glamo->lock); + + glamo_run_script(glamo, glamo_init_script, + ARRAY_SIZE(glamo_init_script), 0); + + + for (n = 0; n < __NUM_GLAMO_ENGINES; n++) { + switch (glamo->engine_state[n]) { + case GLAMO_ENGINE_SUSPENDED: + __glamo_engine_suspend(glamo, n); + break; + case GLAMO_ENGINE_ENABLED: + __glamo_engine_enable(glamo, n); + break; + default: + break; + } + } + + __reg_write(glamo, GLAMO_REG_IRQ_ENABLE, glamo->saved_irq_mask); + + spin_unlock(&glamo->lock); + + return 0; +} + +static struct dev_pm_ops glamo_pm_ops = { + .suspend = glamo_suspend, + .resume = glamo_resume, + .poweroff = glamo_suspend, + .restore = glamo_resume, +}; + +#define GLAMO_PM_OPS (&glamo_pm_ops) + +#else +#define GLAMO_PM_OPS NULL +#endif + +static struct platform_driver glamo_driver = { + .probe = glamo_probe, + .remove = __devexit_p(glamo_remove), + .driver = { + .name = "glamo3362", + .owner = THIS_MODULE, + .pm = GLAMO_PM_OPS, + }, +}; + +static int __devinit glamo_init(void) +{ + return platform_driver_register(&glamo_driver); +} +module_init(glamo_init); + +static void __exit glamo_exit(void) +{ + platform_driver_unregister(&glamo_driver); +} +module_exit(glamo_exit); + +MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>"); +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("Smedia Glamo 3362 core/resource driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:glamo3362"); diff --git a/drivers/mfd/glamo/glamo-core.h b/drivers/mfd/glamo/glamo-core.h new file mode 100644 index 00000000000..17017b03fb5 --- /dev/null +++ b/drivers/mfd/glamo/glamo-core.h @@ -0,0 +1,61 @@ +#ifndef __GLAMO_CORE_H +#define __GLAMO_CORE_H + +#include <linux/mfd/glamo.h> + +/* for the time being, we put the on-screen framebuffer into the lowest + * VRAM space. This should make the code easily compatible with the various + * 2MB/4MB/8MB variants of the Smedia chips */ +#define GLAMO_OFFSET_VRAM 0x800000 +#define GLAMO_OFFSET_FB (GLAMO_OFFSET_VRAM) + +/* we only allocate the minimum possible size for the framebuffer to make + * sure we have sufficient memory for other functions of the chip */ +/*#define GLAMO_FB_SIZE (640*480*4) *//* == 0x12c000 */ +#define GLAMO_INTERNAL_RAM_SIZE 0x800000 +#define GLAMO_MMC_BUFFER_SIZE (64 * 1024) +#define GLAMO_FB_SIZE (GLAMO_INTERNAL_RAM_SIZE - GLAMO_MMC_BUFFER_SIZE) + +enum glamo_pll { + GLAMO_PLL1, + GLAMO_PLL2, +}; + +enum glamo_engine_state { + GLAMO_ENGINE_DISABLED, + GLAMO_ENGINE_SUSPENDED, + GLAMO_ENGINE_ENABLED, +}; + +struct glamo_core { + int irq; + int irq_base; + int irq_works; /* 0 means PCB does not support Glamo IRQ */ + struct resource *mem; + void __iomem *base; + struct platform_device *pdev; + struct glamo_platform_data *pdata; + enum glamo_engine_state engine_state[__NUM_GLAMO_ENGINES]; + spinlock_t lock; + uint16_t saved_irq_mask; +}; + +struct glamo_script { + uint16_t reg; + uint16_t val; +}; + +int glamo_pll_rate(struct glamo_core *glamo, enum glamo_pll pll); + +int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine); +int glamo_engine_suspend(struct glamo_core *glamo, enum glamo_engine engine); +int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine); +void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine); +int glamo_engine_reclock(struct glamo_core *glamo, + enum glamo_engine engine, int ps); + +void glamo_reg_read_batch(struct glamo_core *glamo, uint16_t reg, + uint16_t count, uint16_t *values); +void glamo_reg_write_batch(struct glamo_core *glamo, uint16_t reg, + uint16_t count, uint16_t *values); +#endif /* __GLAMO_CORE_H */ diff --git a/drivers/mfd/glamo/glamo-fb.c b/drivers/mfd/glamo/glamo-fb.c new file mode 100644 index 00000000000..0eac3ac442b --- /dev/null +++ b/drivers/mfd/glamo/glamo-fb.c @@ -0,0 +1,982 @@ +/* Smedia Glamo 336x/337x driver + * + * (C) 2007-2008 by Openmoko, Inc. + * Author: Harald Welte <laforge@openmoko.org> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/console.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/mfd/glamo.h> + +#include <asm/div64.h> + +#ifdef CONFIG_PM +#include <linux/pm.h> +#endif + +#include <linux/glamofb.h> + +#include "glamo-regs.h" +#include "glamo-core.h" + +static void glamofb_program_mode(struct glamofb_handle *glamo); + +struct glamofb_handle { + struct glamo_core *core; + struct fb_info *fb; + struct device *dev; + struct resource *reg; + struct resource *fb_res; + char __iomem *base; + struct glamo_fb_platform_data *mach_info; + char __iomem *cursor_addr; + int cursor_on; + u_int32_t pseudo_pal[16]; + spinlock_t lock_cmd; + int blank_mode; + int mode_set; /* 0 if the current display mode hasn't been set on the glamo */ + int output_enabled; /* 0 if the video output is disabled */ +}; + +static void glamo_output_enable(struct glamofb_handle *gfb) +{ + struct glamo_core *gcore = gfb->core; + + if (gfb->output_enabled) + return; + + /* enable the pixel clock if off */ + glamo_engine_enable(gcore, GLAMO_ENGINE_LCD); + + gfb->output_enabled = 1; + if (!gfb->mode_set) + glamofb_program_mode(gfb); +} + +static void glamo_output_disable(struct glamofb_handle *gfb) +{ + struct glamo_core *gcore = gfb->core; + + if (!gfb->output_enabled) + return; + + /* enable the pixel clock if off */ + glamo_engine_suspend(gcore, GLAMO_ENGINE_LCD); + + gfb->output_enabled = 0; +} + + +static int reg_read(struct glamofb_handle *glamo, + u_int16_t reg) +{ + int i = 0; + + for (i = 0; i != 2; i++) + nop(); + + return readw(glamo->base + reg); +} + +static void reg_write(struct glamofb_handle *glamo, + uint16_t reg, uint16_t val) +{ + int i = 0; + + for (i = 0; i != 2; i++) + nop(); + + writew(val, glamo->base + reg); +} + +static struct glamo_script glamo_regs[] = { + { GLAMO_REG_LCD_MODE1, 0x0020 }, + /* no display rotation, no hardware cursor, no dither, no gamma, + * no retrace flip, vsync low-active, hsync low active, + * no TVCLK, no partial display, hw dest color from fb, + * no partial display mode, LCD1, software flip, */ + { GLAMO_REG_LCD_MODE2, 0x9020 }, + /* video flip, no ptr, no ptr, dhclk off, + * normal mode, no cpuif, + * res, serial msb first, single fb, no fr ctrl, + * cpu if bits all zero, no crc + * 0000 0000 0010 0000 */ + { GLAMO_REG_LCD_MODE3, 0x0b40 }, + /* src data rgb565, res, 18bit rgb666 + * 000 01 011 0100 0000 */ + { GLAMO_REG_LCD_POLARITY, 0x440c }, + /* DE high active, no cpu/lcd if, cs0 force low, a0 low active, + * np cpu if, 9bit serial data, sclk rising edge latch data + * 01 00 0 100 0 000 01 0 0 */ + /* The following values assume 640*480@16bpp */ + { GLAMO_REG_LCD_A_BASE1, 0x0000 }, /* display A base address 15:0 */ + { GLAMO_REG_LCD_A_BASE2, 0x0000 }, /* display A base address 22:16 */ + { GLAMO_REG_LCD_CURSOR_BASE1, 0xC000 }, /* cursor base address 15:0 */ + { GLAMO_REG_LCD_CURSOR_BASE2, 0x0012 }, /* cursor base address 22:16 */ + { GLAMO_REG_LCD_COMMAND2, 0x0000 }, /* display page A */ +}; + +static int glamofb_run_script(struct glamofb_handle *glamo, + struct glamo_script *script, int len) +{ + int i; + + for (i = 0; i < len; i++) { + struct glamo_script *line = &script[i]; + + if (line->reg == 0xffff) + return 0; + else if (line->reg == 0xfffe) + msleep(line->val); + else + reg_write(glamo, script[i].reg, script[i].val); + } + + return 0; +} + +static int glamofb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct glamofb_handle *glamo = info->par; + + if (var->bits_per_pixel != 16) + var->bits_per_pixel = 16; + + var->height = glamo->mach_info->height; + var->width = glamo->mach_info->width; + + /* FIXME: set rgb positions */ + switch (var->bits_per_pixel) { + case 16: + switch (reg_read(glamo, GLAMO_REG_LCD_MODE3) & 0xc000) { + case GLAMO_LCD_SRC_RGB565: + var->red.offset = 11; + var->green.offset = 5; + var->blue.offset = 0; + var->red.length = 5; + var->green.length = 6; + var->blue.length = 5; + var->transp.length = 0; + break; + case GLAMO_LCD_SRC_ARGB1555: + var->transp.offset = 15; + var->red.offset = 10; + var->green.offset = 5; + var->blue.offset = 0; + var->transp.length = 1; + var->red.length = 5; + var->green.length = 5; + var->blue.length = 5; + break; + case GLAMO_LCD_SRC_ARGB4444: + var->transp.offset = 12; + var->red.offset = 8; + var->green.offset = 4; + var->blue.offset = 0; + var->transp.length = 4; + var->red.length = 4; + var->green.length = 4; + var->blue.length = 4; + break; + } + break; + case 24: + case 32: + default: + /* The Smedia Glamo doesn't support anything but 16bit color */ + printk(KERN_ERR + "Smedia driver does not [yet?] support 24/32bpp\n"); + return -EINVAL; + } + + return 0; +} + +static void reg_set_bit_mask(struct glamofb_handle *glamo, + uint16_t reg, uint16_t mask, + uint16_t val) +{ + u_int16_t tmp; + + val &= mask; + + tmp = reg_read(glamo, reg); + tmp &= ~mask; + tmp |= val; + reg_write(glamo, reg, tmp); +} + +#define GLAMO_LCD_WIDTH_MASK 0x03FF +#define GLAMO_LCD_HEIGHT_MASK 0x03FF +#define GLAMO_LCD_PITCH_MASK 0x07FE +#define GLAMO_LCD_HV_TOTAL_MASK 0x03FF +#define GLAMO_LCD_HV_RETR_START_MASK 0x03FF +#define GLAMO_LCD_HV_RETR_END_MASK 0x03FF +#define GLAMO_LCD_HV_RETR_DISP_START_MASK 0x03FF +#define GLAMO_LCD_HV_RETR_DISP_END_MASK 0x03FF + +/* the caller has to enxure lock_cmd is held and we are in cmd mode */ +static void __rotate_lcd(struct glamofb_handle *glamo, __u32 rotation) +{ + int glamo_rot; + + switch (rotation) { + case FB_ROTATE_CW: + glamo_rot = GLAMO_LCD_ROT_MODE_90; + break; + case FB_ROTATE_UD: + glamo_rot = GLAMO_LCD_ROT_MODE_180; + break; + case FB_ROTATE_CCW: + glamo_rot = GLAMO_LCD_ROT_MODE_270; + break; + default: + glamo_rot = GLAMO_LCD_ROT_MODE_0; + break; + } + + reg_set_bit_mask(glamo, + GLAMO_REG_LCD_WIDTH, + GLAMO_LCD_ROT_MODE_MASK, + glamo_rot); + reg_set_bit_mask(glamo, + GLAMO_REG_LCD_MODE1, + GLAMO_LCD_MODE1_ROTATE_EN, + (glamo_rot != GLAMO_LCD_ROT_MODE_0) ? + GLAMO_LCD_MODE1_ROTATE_EN : 0); +} + +static void glamofb_program_mode(struct glamofb_handle *gfb) +{ + int sync, bp, disp, fp, total; + unsigned long flags; + struct glamo_core *gcore = gfb->core; + struct fb_var_screeninfo *var = &gfb->fb->var; + + dev_dbg(&gcore->pdev->dev, + "glamofb_program_mode spin_lock_irqsave\n"); + spin_lock_irqsave(&gfb->lock_cmd, flags); + + if (glamofb_cmd_mode(gfb, 1)) + goto out_unlock; + + if (var->pixclock) + glamo_engine_reclock(gcore, GLAMO_ENGINE_LCD, + (1000000000UL / gfb->fb->var.pixclock) * 1000); + + reg_set_bit_mask(gfb, + GLAMO_REG_LCD_WIDTH, + GLAMO_LCD_WIDTH_MASK, + var->xres); + reg_set_bit_mask(gfb, + GLAMO_REG_LCD_HEIGHT, + GLAMO_LCD_HEIGHT_MASK, + var->yres); + reg_set_bit_mask(gfb, + GLAMO_REG_LCD_PITCH, + GLAMO_LCD_PITCH_MASK, + gfb->fb->fix.line_length); + + /* honour the rotation request */ + __rotate_lcd(gfb, var->rotate); + + /* update scannout timings */ + sync = 0; + bp = sync + var->hsync_len; + disp = bp + var->left_margin; + fp = disp + var->xres; + total = fp + var->right_margin; + + reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_TOTAL, + GLAMO_LCD_HV_TOTAL_MASK, total); + reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_RETR_START, + GLAMO_LCD_HV_RETR_START_MASK, sync); + reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_RETR_END, + GLAMO_LCD_HV_RETR_END_MASK, bp); + reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_DISP_START, + GLAMO_LCD_HV_RETR_DISP_START_MASK, disp); + reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_DISP_END, + GLAMO_LCD_HV_RETR_DISP_END_MASK, fp); + + sync = 0; + bp = sync + var->vsync_len; + disp = bp + var->upper_margin; + fp = disp + var->yres; + total = fp + var->lower_margin; + + reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_TOTAL, + GLAMO_LCD_HV_TOTAL_MASK, total); + reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_RETR_START, + GLAMO_LCD_HV_RETR_START_MASK, sync); + reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_RETR_END, + GLAMO_LCD_HV_RETR_END_MASK, bp); + reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_DISP_START, + GLAMO_LCD_HV_RETR_DISP_START_MASK, disp); + reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_DISP_END, + GLAMO_LCD_HV_RETR_DISP_END_MASK, fp); + + glamofb_cmd_mode(gfb, 0); + + gfb->mode_set = 1; + +out_unlock: + dev_dbg(&gcore->pdev->dev, + "glamofb_program_mode spin_unlock_irqrestore\n"); + spin_unlock_irqrestore(&gfb->lock_cmd, flags); +} + + +static int glamofb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + return 0; +} + +static struct fb_videomode *glamofb_find_mode(struct fb_info *info, + struct fb_var_screeninfo *var) +{ + struct glamofb_handle *glamo = info->par; + struct glamo_fb_platform_data *pdata = glamo->mach_info; + struct fb_videomode *mode; + int i; + + for (i = pdata->num_modes, mode = pdata->modes; i; --i, ++mode) { + if (mode->xres == var->xres && + mode->yres == var->yres) + return mode; + } + + return NULL; +} + +static int glamofb_set_par(struct fb_info *info) +{ + struct glamofb_handle *glamo = info->par; + struct fb_var_screeninfo *var = &info->var; + struct fb_videomode *mode; + + mode = glamofb_find_mode(info, var); + if (!mode) + return -EINVAL; + + fb_videomode_to_var(var, mode); + + info->mode = mode; + + glamo->mode_set = 0; + + switch (var->rotate) { + case FB_ROTATE_CW: + case FB_ROTATE_CCW: + info->fix.line_length = (var->yres * var->bits_per_pixel) / 8; + /* FIXME: Limit pixelclock */ + var->pixclock *= 2; + break; + default: + info->fix.line_length = (var->xres * var->bits_per_pixel) / 8; + break; + } + + if (glamo->output_enabled) + glamofb_program_mode(glamo); + + return 0; +} + +static int glamofb_blank(int blank_mode, struct fb_info *info) +{ + struct glamofb_handle *gfb = info->par; + + dev_dbg(gfb->dev, "glamofb_blank(%u)\n", blank_mode); + + switch (blank_mode) { + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + /* FIXME: add pdata hook/flag to indicate whether + * we should already switch off pixel clock here */ + break; + case FB_BLANK_POWERDOWN: + /* disable the pixel clock */ + glamo_output_disable(gfb); + gfb->blank_mode = blank_mode; + break; + case FB_BLANK_UNBLANK: + case FB_BLANK_NORMAL: + glamo_output_enable(gfb); + gfb->blank_mode = blank_mode; + break; + } + + /* FIXME: once we have proper clock management in glamo-core, + * we can determine if other units need MCLK1 or the PLL, and + * disable it if not used. */ + return 0; +} + +static inline unsigned int chan_to_field(unsigned int chan, + struct fb_bitfield *bf) +{ + chan &= 0xffff; + chan >>= 16 - bf->length; + return chan << bf->offset; +} + +static int glamofb_setcolreg(unsigned regno, + unsigned red, unsigned green, unsigned blue, + unsigned transp, struct fb_info *info) +{ + struct glamofb_handle *glamo = info->par; + unsigned int val; + + switch (glamo->fb->fix.visual) { + case FB_VISUAL_TRUECOLOR: + case FB_VISUAL_DIRECTCOLOR: + /* true-colour, use pseuo-palette */ + + if (regno < 16) { + u32 *pal = glamo->fb->pseudo_palette; + + val = chan_to_field(red, &glamo->fb->var.red); + val |= chan_to_field(green, &glamo->fb->var.green); + val |= chan_to_field(blue, &glamo->fb->var.blue); + + pal[regno] = val; + }; + break; + default: + return 1; /* unknown type */ + } + + return 0; +} + +static int glamofb_ioctl(struct fb_info *info, unsigned int cmd, + unsigned long arg) +{ + struct glamofb_handle *gfb = (struct glamofb_handle *)info->par; + struct glamo_core *gcore = gfb->core; + int retval = -ENOTTY; + + switch (cmd) { + case GLAMOFB_ENGINE_ENABLE: + retval = glamo_engine_enable(gcore, arg); + break; + case GLAMOFB_ENGINE_DISABLE: + retval = glamo_engine_disable(gcore, arg); + break; + case GLAMOFB_ENGINE_RESET: + glamo_engine_reset(gcore, arg); + retval = 0; + break; + default: + break; + } + + return retval; +} + + +#ifdef CONFIG_MFD_GLAMO_HWACCEL +static inline void glamofb_vsync_wait(struct glamofb_handle *glamo, + int line, int size, int range) +{ + int count[2]; + + do { + count[0] = reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff; + count[1] = reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff; + } while (count[0] != count[1] || + (line < count[0] + range && + size > count[0] - range) || + count[0] < range * 2); +} + +/* + * Enable/disable the hardware cursor mode altogether + * (for blinking and such, use glamofb_cursor()). + */ +static void glamofb_cursor_onoff(struct glamofb_handle *glamo, int on) +{ + int y, size; + + if (glamo->cursor_on) { + y = reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_POS); + size = reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE); + + glamofb_vsync_wait(glamo, y, size, 30); + } + + reg_set_bit_mask(glamo, GLAMO_REG_LCD_MODE1, + GLAMO_LCD_MODE1_CURSOR_EN, + on ? GLAMO_LCD_MODE1_CURSOR_EN : 0); + glamo->cursor_on = on; + + /* Hide the cursor by default */ + reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE, 0); +} + +static int glamofb_cursor(struct fb_info *info, struct fb_cursor *cursor) +{ + struct glamofb_handle *glamo = info->par; + unsigned long flags; + + spin_lock_irqsave(&glamo->lock_cmd, flags); + + reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE, + cursor->enable ? cursor->image.width : 0); + + if (cursor->set & FB_CUR_SETPOS) { + reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_POS, + cursor->image.dx); + reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_POS, + cursor->image.dy); + } + + if (cursor->set & FB_CUR_SETCMAP) { + uint16_t fg = glamo->pseudo_pal[cursor->image.fg_color]; + uint16_t bg = glamo->pseudo_pal[cursor->image.bg_color]; + + reg_write(glamo, GLAMO_REG_LCD_CURSOR_FG_COLOR, fg); + reg_write(glamo, GLAMO_REG_LCD_CURSOR_BG_COLOR, bg); + reg_write(glamo, GLAMO_REG_LCD_CURSOR_DST_COLOR, fg); + } + + if (cursor->set & FB_CUR_SETHOT) + reg_write(glamo, GLAMO_REG_LCD_CURSOR_PRESET, + (cursor->hot.x << 8) | cursor->hot.y); + + if ((cursor->set & FB_CUR_SETSIZE) || + (cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE))) { + int x, y, pitch, op; + const uint8_t *pcol = cursor->image.data; + const uint8_t *pmsk = cursor->mask; + uint8_t __iomem *dst = glamo->cursor_addr; + uint8_t dcol = 0; + uint8_t dmsk = 0; + uint8_t byte = 0; + + if (cursor->image.depth > 1) { + spin_unlock_irqrestore(&glamo->lock_cmd, flags); + return -EINVAL; + } + + pitch = ((cursor->image.width + 7) >> 2) & ~1; + reg_write(glamo, GLAMO_REG_LCD_CURSOR_PITCH, + pitch); + reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE, + cursor->image.height); + + for (y = 0; y < cursor->image.height; y++) { + byte = 0; + for (x = 0; x < cursor->image.width; x++) { + if ((x % 8) == 0) { + dcol = *pcol++; + dmsk = *pmsk++; + } else { + dcol >>= 1; + dmsk >>= 1; + } + + if (cursor->rop == ROP_COPY) + op = (dmsk & 1) ? + (dcol & 1) ? 1 : 3 : 0; + else + op = ((dmsk & 1) << 1) | + ((dcol & 1) << 0); + byte |= op << ((x & 3) << 1); + + if (x % 4 == 3) { + writeb(byte, dst + x / 4); + byte = 0; + } + } + if (x % 4) { + writeb(byte, dst + x / 4); + byte = 0; + } + + dst += pitch; + } + } + + spin_unlock_irqrestore(&glamo->lock_cmd, flags); + + return 0; +} +#endif + +static inline int glamofb_cmdq_empty(struct glamofb_handle *gfb) +{ + /* DGCMdQempty -- 1 == command queue is empty */ + return reg_read(gfb, GLAMO_REG_LCD_STATUS1) & (1 << 15); +} + +/* call holding gfb->lock_cmd when locking, until you unlock */ +int glamofb_cmd_mode(struct glamofb_handle *gfb, int on) +{ + int timeout = 2000000; + + dev_dbg(gfb->dev, "glamofb_cmd_mode(gfb=%p, on=%d)\n", gfb, on); + if (on) { + dev_dbg(gfb->dev, "%s: waiting for cmdq empty: ", + __func__); + while (!glamofb_cmdq_empty(gfb) && (timeout--)) + cpu_relax(); + if (timeout < 0) { + printk(KERN_ERR "glamofb cmd_queue never got empty\n"); + return -EIO; + } + dev_dbg(gfb->dev, "empty!\n"); + + /* display the entire frame then switch to command */ + reg_write(gfb, GLAMO_REG_LCD_COMMAND1, + GLAMO_LCD_CMD_TYPE_DISP | + GLAMO_LCD_CMD_DATA_FIRE_VSYNC); + + /* wait until lcd idle */ + dev_dbg(gfb->dev, "waiting for lcd idle: "); + timeout = 2000000; + while (!(reg_read(gfb, GLAMO_REG_LCD_STATUS2) & (1 << 12)) && + (timeout--)) + cpu_relax(); + if (timeout < 0) { + printk(KERN_ERR"*************" + "glamofb lcd never idle" + "*************\n"); + return -EIO; + } + + mdelay(100); + + dev_dbg(gfb->dev, "cmd mode entered\n"); + + } else { + /* RGB interface needs vsync/hsync */ + if (reg_read(gfb, GLAMO_REG_LCD_MODE3) & GLAMO_LCD_MODE3_RGB) + reg_write(gfb, GLAMO_REG_LCD_COMMAND1, + GLAMO_LCD_CMD_TYPE_DISP | + GLAMO_LCD_CMD_DATA_DISP_SYNC); + + reg_write(gfb, GLAMO_REG_LCD_COMMAND1, + GLAMO_LCD_CMD_TYPE_DISP | + GLAMO_LCD_CMD_DATA_DISP_FIRE); + } + + return 0; +} +EXPORT_SYMBOL_GPL(glamofb_cmd_mode); + + +int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val) +{ + int timeout = 200000; + + dev_dbg(gfb->dev, "%s: waiting for cmdq empty\n", __func__); + while ((!glamofb_cmdq_empty(gfb)) && (timeout--)) + yield(); + if (timeout < 0) { + printk(KERN_ERR"*************" + "glamofb cmd_queue never got empty" + "*************\n"); + return 1; + } + dev_dbg(gfb->dev, "idle, writing 0x%04x\n", val); + + reg_write(gfb, GLAMO_REG_LCD_COMMAND1, val); + + return 0; +} +EXPORT_SYMBOL_GPL(glamofb_cmd_write); + +static struct fb_ops glamofb_ops = { + .owner = THIS_MODULE, + .fb_check_var = glamofb_check_var, + .fb_pan_display = glamofb_pan_display, + .fb_set_par = glamofb_set_par, + .fb_blank = glamofb_blank, + .fb_setcolreg = glamofb_setcolreg, + .fb_ioctl = glamofb_ioctl, +#ifdef CONFIG_MFD_GLAMO_HWACCEL + .fb_cursor = glamofb_cursor, +#endif + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, +}; + +static int glamofb_init_regs(struct glamofb_handle *glamo) +{ + struct fb_info *info = glamo->fb; + + glamofb_check_var(&info->var, info); + glamofb_run_script(glamo, glamo_regs, ARRAY_SIZE(glamo_regs)); + glamofb_set_par(info); + + return 0; +} + +static int __init glamofb_probe(struct platform_device *pdev) +{ + int rc = -EIO; + struct fb_info *fbinfo; + struct glamofb_handle *glamofb; + struct glamo_core *core = dev_get_drvdata(pdev->dev.parent); + struct glamo_fb_platform_data *mach_info; + + printk(KERN_INFO "SMEDIA Glamo frame buffer driver (C) 2007 " + "Openmoko, Inc.\n"); + + if (!core->pdata || !core->pdata->fb_data) + return -ENOENT; + + + fbinfo = framebuffer_alloc(sizeof(struct glamofb_handle), &pdev->dev); + if (!fbinfo) + return -ENOMEM; + + + glamofb = fbinfo->par; + glamofb->fb = fbinfo; + glamofb->dev = &pdev->dev; + + glamofb->blank_mode = FB_BLANK_POWERDOWN; + + strcpy(fbinfo->fix.id, "SMedia Glamo"); + + glamofb->reg = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "glamo-fb-regs"); + if (!glamofb->reg) { + dev_err(&pdev->dev, "platform device with no registers?\n"); + rc = -ENOENT; + goto out_free; + } + + glamofb->fb_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "glamo-fb-mem"); + if (!glamofb->fb_res) { + dev_err(&pdev->dev, "platform device with no memory ?\n"); + rc = -ENOENT; + goto out_free; + } + + glamofb->reg = request_mem_region(glamofb->reg->start, + resource_size(glamofb->reg), + pdev->name); + if (!glamofb->reg) { + dev_err(&pdev->dev, "failed to request mmio region\n"); + goto out_free; + } + + glamofb->fb_res = request_mem_region(glamofb->fb_res->start, + resource_size(glamofb->fb_res), + pdev->name); + if (!glamofb->fb_res) { + dev_err(&pdev->dev, "failed to request vram region\n"); + goto out_release_reg; + } + + /* we want to remap only the registers required for this core + * driver. */ + glamofb->base = ioremap_nocache(glamofb->reg->start, + resource_size(glamofb->reg)); + if (!glamofb->base) { + dev_err(&pdev->dev, "failed to ioremap() mmio memory\n"); + goto out_release_fb; + } + + fbinfo->fix.smem_start = (unsigned long) glamofb->fb_res->start; + fbinfo->fix.smem_len = (__u32) resource_size(glamofb->fb_res); + + fbinfo->screen_base = ioremap(glamofb->fb_res->start, + resource_size(glamofb->fb_res)); + if (!fbinfo->screen_base) { + dev_err(&pdev->dev, "failed to ioremap() vram memory\n"); + goto out_release_fb; + } + glamofb->cursor_addr = fbinfo->screen_base + 0x12C000; + + platform_set_drvdata(pdev, glamofb); + + mach_info = core->pdata->fb_data; + glamofb->core = core; + glamofb->mach_info = mach_info; + + fbinfo->fix.visual = FB_VISUAL_TRUECOLOR; + fbinfo->fix.type = FB_TYPE_PACKED_PIXELS; + fbinfo->fix.type_aux = 0; + fbinfo->fix.xpanstep = 0; + fbinfo->fix.ypanstep = 0; + fbinfo->fix.ywrapstep = 0; + fbinfo->fix.accel = FB_ACCEL_GLAMO; + + + fbinfo->fbops = &glamofb_ops; + fbinfo->flags = FBINFO_FLAG_DEFAULT; + fbinfo->pseudo_palette = &glamofb->pseudo_pal; + + fbinfo->mode = mach_info->modes; + fb_videomode_to_var(&fbinfo->var, fbinfo->mode); + fbinfo->var.bits_per_pixel = 16; + fbinfo->var.nonstd = 0; + fbinfo->var.activate = FB_ACTIVATE_NOW; + fbinfo->var.height = mach_info->height; + fbinfo->var.width = mach_info->width; + fbinfo->var.accel_flags = 0; + fbinfo->var.vmode = FB_VMODE_NONINTERLACED; + + glamo_engine_enable(core, GLAMO_ENGINE_LCD); + glamo_engine_reset(core, GLAMO_ENGINE_LCD); + glamofb->output_enabled = 1; + glamofb->mode_set = 1; + + dev_info(&pdev->dev, "spin_lock_init\n"); + spin_lock_init(&glamofb->lock_cmd); + glamofb_init_regs(glamofb); +#ifdef CONFIG_MFD_GLAMO_HWACCEL + glamofb_cursor_onoff(glamofb, 1); +#endif + + fb_videomode_to_modelist(mach_info->modes, mach_info->num_modes, + &fbinfo->modelist); + + rc = register_framebuffer(fbinfo); + if (rc < 0) { + dev_err(&pdev->dev, "failed to register framebuffer\n"); + goto out_unmap_fb; + } + + printk(KERN_INFO "fb%d: %s frame buffer device\n", + fbinfo->node, fbinfo->fix.id); + + return 0; + +out_unmap_fb: + iounmap(fbinfo->screen_base); + iounmap(glamofb->base); +out_release_fb: + release_mem_region(glamofb->fb_res->start, + resource_size(glamofb->fb_res)); +out_release_reg: + release_mem_region(glamofb->reg->start, + resource_size(glamofb->reg)); +out_free: + framebuffer_release(fbinfo); + return rc; +} + +static int glamofb_remove(struct platform_device *pdev) +{ + struct glamofb_handle *glamofb = platform_get_drvdata(pdev); + + platform_set_drvdata(pdev, NULL); + iounmap(glamofb->base); + release_mem_region(glamofb->reg->start, resource_size(glamofb->reg)); + + framebuffer_release(glamofb->fb); + + return 0; +} + +#ifdef CONFIG_PM + +static int glamofb_suspend(struct device *dev) +{ + struct glamofb_handle *gfb = dev_get_drvdata(dev); + + acquire_console_sem(); + fb_set_suspend(gfb->fb, 1); + release_console_sem(); + + /* seriously -- nobody is allowed to touch glamo memory when we + * are suspended or we lock on nWAIT + */ + /* iounmap(gfb->fb->screen_base); */ + + return 0; +} + +static int glamofb_resume(struct device *dev) +{ + struct glamofb_handle *gfb = dev_get_drvdata(dev); + + /* OK let's allow framebuffer ops again */ + /* gfb->fb->screen_base = ioremap(gfb->fb_res->start, + resource_size(gfb->fb_res)); */ + glamo_engine_enable(gfb->core, GLAMO_ENGINE_LCD); + glamo_engine_reset(gfb->core, GLAMO_ENGINE_LCD); + + glamofb_init_regs(gfb); +#ifdef CONFIG_MFD_GLAMO_HWACCEL + glamofb_cursor_onoff(gfb, 1); +#endif + + acquire_console_sem(); + fb_set_suspend(gfb->fb, 0); + release_console_sem(); + + return 0; +} + +static struct dev_pm_ops glamofb_pm_ops = { + .suspend = glamofb_suspend, + .resume = glamofb_resume, +}; + +#define GLAMOFB_PM_OPS (&glamofb_pm_ops) + +#else +#define GLAMOFB_PM_OPS NULL +#endif + +static struct platform_driver glamofb_driver = { + .probe = glamofb_probe, + .remove = glamofb_remove, + .driver = { + .name = "glamo-fb", + .owner = THIS_MODULE, + .pm = GLAMOFB_PM_OPS + }, +}; + +static int __devinit glamofb_init(void) +{ + return platform_driver_register(&glamofb_driver); +} + +static void __exit glamofb_cleanup(void) +{ + platform_driver_unregister(&glamofb_driver); +} + +module_init(glamofb_init); +module_exit(glamofb_cleanup); + +MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>"); +MODULE_DESCRIPTION("Smedia Glamo 336x/337x framebuffer driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/glamo/glamo-gpio.c b/drivers/mfd/glamo/glamo-gpio.c new file mode 100644 index 00000000000..30ee6ed1d9a --- /dev/null +++ b/drivers/mfd/glamo/glamo-gpio.c @@ -0,0 +1,285 @@ +/* Smedia Glamo 336x/337x gpio driver + * + * (C) 2009 Lars-Peter Clausen + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/io.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +#include <linux/gpio.h> +#include <linux/mfd/glamo.h> + +#include "glamo-core.h" +#include "glamo-regs.h" + +#define GLAMO_NR_GPIO 21 +#define GLAMO_NR_GPIO_REGS DIV_ROUND_UP(GLAMO_NR_GPIO, 4) + +#define GLAMO_REG_GPIO(x) (((x) * 2) + GLAMO_REG_GPIO_GEN1) + +struct glamo_gpio { + struct glamo_core *glamo; + struct gpio_chip chip; + uint16_t saved_regs[GLAMO_NR_GPIO_REGS]; +}; + +#define REG_OF_GPIO(gpio) (GLAMO_REG_GPIO(gpio >> 2)) +#define NUM_OF_GPIO(gpio) (gpio & 0x3) +#define DIRECTION_BIT(gpio) (1 << (NUM_OF_GPIO(gpio) + 0)) +#define OUTPUT_BIT(gpio) (1 << (NUM_OF_GPIO(gpio) + 4)) +#define INPUT_BIT(gpio) (1 << (NUM_OF_GPIO(gpio) + 8)) +#define FUNC_BIT(gpio) (1 << (NUM_OF_GPIO(gpio) + 12)) + + +static inline struct glamo_core *chip_to_glamo(struct gpio_chip *chip) +{ + return container_of(chip, struct glamo_gpio, chip)->glamo; +} + +static void glamo_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct glamo_core *glamo = chip_to_glamo(chip); + unsigned int reg = REG_OF_GPIO(offset); + u_int16_t tmp; + + spin_lock(&glamo->lock); + tmp = readw(glamo->base + reg); + if (value) + tmp |= OUTPUT_BIT(offset); + else + tmp &= ~OUTPUT_BIT(offset); + writew(tmp, glamo->base + reg); + spin_unlock(&glamo->lock); +} + +static int glamo_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct glamo_core *glamo = chip_to_glamo(chip); + return !!(readw(glamo->base + REG_OF_GPIO(offset)) & INPUT_BIT(offset)); +} + +static int glamo_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct glamo_core *glamo = chip_to_glamo(chip); + unsigned int reg = REG_OF_GPIO(offset); + u_int16_t tmp; + + spin_lock(&glamo->lock); + tmp = readw(glamo->base + reg); + if ((tmp & FUNC_BIT(offset)) == 0) { + tmp |= FUNC_BIT(offset); + writew(tmp, glamo->base + reg); + } + spin_unlock(&glamo->lock); + + return 0; +} + +static void glamo_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct glamo_core *glamo = chip_to_glamo(chip); + unsigned int reg = REG_OF_GPIO(offset); + u_int16_t tmp; + + spin_lock(&glamo->lock); + tmp = readw(glamo->base + reg); + if ((tmp & FUNC_BIT(offset)) == 1) { + tmp &= ~FUNC_BIT(offset); + writew(tmp, glamo->base + reg); + } + spin_unlock(&glamo->lock); +} + +static int glamo_gpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct glamo_core *glamo = chip_to_glamo(chip); + unsigned int reg = REG_OF_GPIO(offset); + u_int16_t tmp; + + spin_lock(&glamo->lock); + tmp = readw(glamo->base + reg); + tmp &= ~DIRECTION_BIT(offset); + + if (value) + tmp |= OUTPUT_BIT(offset); + else + tmp &= ~OUTPUT_BIT(offset); + + writew(tmp, glamo->base + reg); + spin_unlock(&glamo->lock); + + return 0; +} + +static int glamo_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct glamo_core *glamo = chip_to_glamo(chip); + unsigned int reg = REG_OF_GPIO(offset); + u_int16_t tmp; + + spin_lock(&glamo->lock); + tmp = readw(glamo->base + reg); + if ((tmp & DIRECTION_BIT(offset)) == 0) { + tmp |= DIRECTION_BIT(offset); + writew(tmp, glamo->base + reg); + } + spin_unlock(&glamo->lock); + + return 0; +} + +static const struct __devinit gpio_chip glamo_gpio_chip = { + .label = "glamo", + .request = glamo_gpio_request, + .free = glamo_gpio_free, + .direction_input = glamo_gpio_direction_input, + .get = glamo_gpio_get, + .direction_output = glamo_gpio_direction_output, + .set = glamo_gpio_set, + .base = -1, + .ngpio = GLAMO_NR_GPIO, + .can_sleep = 0, + .owner = THIS_MODULE, +}; + +static int __devinit glamo_gpio_probe(struct platform_device *pdev) +{ + struct glamo_platform_data *pdata = pdev->dev.parent->platform_data; + struct glamo_gpio *glamo_gpio; + int ret; + + glamo_gpio = kzalloc(sizeof(struct glamo_gpio), GFP_KERNEL); + if (!glamo_gpio) + return -ENOMEM; + + glamo_gpio->glamo = dev_get_drvdata(pdev->dev.parent); + glamo_gpio->chip = glamo_gpio_chip; + glamo_gpio->chip.dev = &pdev->dev; + if (pdata && pdata->gpio_data) + glamo_gpio->chip.base = pdata->gpio_data->base; + + ret = gpiochip_add(&glamo_gpio->chip); + + if (ret) { + dev_err(&pdev->dev, "Could not register gpio chip: %d\n", ret); + goto err; + } + + platform_set_drvdata(pdev, glamo_gpio); + + if (pdata && pdata->gpio_data && pdata->gpio_data->registered) + pdata->gpio_data->registered(&pdev->dev); + + return 0; +err: + kfree(glamo_gpio); + return ret; +} + +static int __devexit glamo_gpio_remove(struct platform_device *pdev) +{ + struct glamo_gpio *glamo_gpio = platform_get_drvdata(pdev); + int ret; + + ret = gpiochip_remove(&glamo_gpio->chip); + if (!ret) + goto done; + + platform_set_drvdata(pdev, NULL); + kfree(glamo_gpio); + +done: + return ret; +} + +#ifdef CONFIG_PM + +static int glamo_gpio_suspend(struct device *dev) +{ + struct glamo_gpio *glamo_gpio = dev_get_drvdata(dev); + struct glamo_core *glamo = glamo_gpio->glamo; + uint16_t *saved_regs = glamo_gpio->saved_regs; + int i; + + spin_lock(&glamo->lock); + for (i = 0; i < GLAMO_NR_GPIO / 4; ++i) + saved_regs[i] = readw(glamo->base + GLAMO_REG_GPIO(i)); + spin_unlock(&glamo->lock); + + return 0; +} + +static int glamo_gpio_resume(struct device *dev) +{ + struct glamo_gpio *glamo_gpio = dev_get_drvdata(dev); + struct glamo_core *glamo = glamo_gpio->glamo; + uint16_t *saved_regs = glamo_gpio->saved_regs; + int i; + + spin_lock(&glamo->lock); + for (i = 0; i < GLAMO_NR_GPIO_REGS; ++i) + writew(saved_regs[i], glamo->base + GLAMO_REG_GPIO(i)); + spin_unlock(&glamo->lock); + return 0; +} + +static const struct dev_pm_ops glamo_pm_ops = { + .suspend = glamo_gpio_suspend, + .resume = glamo_gpio_resume, + .freeze = glamo_gpio_suspend, + .thaw = glamo_gpio_resume, +}; + +#define GLAMO_GPIO_PM_OPS (&glamo_pm_ops) + +#else +#define GLAMO_GPIO_PM_OPS NULL +#endif + +static struct platform_driver glamo_gpio_driver = { + .driver = { + .name = "glamo-gpio", + .owner = THIS_MODULE, + .pm = GLAMO_GPIO_PM_OPS, + }, + .probe = glamo_gpio_probe, + .remove = __devexit_p(glamo_gpio_remove), +}; + +static int __devinit glamo_gpio_init(void) +{ + return platform_driver_register(&glamo_gpio_driver); +} +module_init(glamo_gpio_init); + +static void __exit glamo_gpio_exit(void) +{ + platform_driver_unregister(&glamo_gpio_driver); +} +module_exit(glamo_gpio_exit); + +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("GPIO interface for the Glamo multimedia device"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:glamo-gpio"); diff --git a/drivers/mfd/glamo/glamo-mci.c b/drivers/mfd/glamo/glamo-mci.c new file mode 100644 index 00000000000..f49fa7167aa --- /dev/null +++ b/drivers/mfd/glamo/glamo-mci.c @@ -0,0 +1,1023 @@ +/* + * linux/drivers/mmc/host/glamo-mmc.c - Glamo MMC driver + * + * Copyright (C) 2007 Openmoko, Inc, Andy Green <andy@openmoko.com> + * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de> + * Based on S3C MMC driver that was: + * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sd.h> +#include <linux/mmc/host.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/crc7.h> +#include <linux/scatterlist.h> +#include <linux/io.h> +#include <linux/regulator/consumer.h> +#include <linux/err.h> +#include <linux/mfd/glamo.h> + +#include "glamo-core.h" +#include "glamo-regs.h" + +struct glamo_mci_host { + struct glamo_mmc_platform_data *pdata; + struct platform_device *pdev; + struct glamo_core *core; + struct mmc_host *mmc; + struct resource *mmio_mem; + struct resource *data_mem; + void __iomem *mmio_base; + uint16_t __iomem *data_base; + + unsigned int irq; + + struct regulator *regulator; + struct mmc_request *mrq; + + unsigned int clk_rate; + + unsigned short vdd; + char power_mode; + + unsigned char request_counter; + + struct timer_list disable_timer; + + struct work_struct irq_work; + struct work_struct read_work; + + unsigned clk_enabled:1; +}; + +static void glamo_mci_send_request(struct mmc_host *mmc, + struct mmc_request *mrq); +static void glamo_mci_send_command(struct glamo_mci_host *host, + struct mmc_command *cmd); + +/* + * Max SD clock rate + * + * held at /(3 + 1) due to concerns of 100R recommended series resistor + * allows 16MHz @ 4-bit --> 8MBytes/sec raw + * + * you can override this on kernel commandline using + * + * glamo_mci.sd_max_clk=10000000 + * + * for example + */ + +static int sd_max_clk = 21000000; +module_param(sd_max_clk, int, 0644); + +/* + * Slow SD clock rate + * + * you can override this on kernel commandline using + * + * glamo_mci.sd_slow_ratio=8 + * + * for example + * + * platform callback is used to decide effective clock rate, if not + * defined then max is used, if defined and returns nonzero, rate is + * divided by this factor + */ + +static int sd_slow_ratio = 8; +module_param(sd_slow_ratio, int, 0644); + +/* + * Post-power SD clock rate + * + * you can override this on kernel commandline using + * + * glamo_mci.sd_post_power_clock=1000000 + * + * for example + * + * After changing power to card, clock is held at this rate until first bulk + * transfer completes + */ + +static int sd_post_power_clock = 1000000; +module_param(sd_post_power_clock, int, 0644); + + +static inline void glamo_reg_write(struct glamo_mci_host *glamo, + uint16_t reg, uint16_t val) +{ + writew(val, glamo->mmio_base + reg); +} + +static inline uint16_t glamo_reg_read(struct glamo_mci_host *glamo, + uint16_t reg) +{ + return readw(glamo->mmio_base + reg); +} + +static void glamo_reg_set_bit_mask(struct glamo_mci_host *glamo, + uint16_t reg, uint16_t mask, + uint16_t val) +{ + uint16_t tmp; + + val &= mask; + + tmp = glamo_reg_read(glamo, reg); + tmp &= ~mask; + tmp |= val; + glamo_reg_write(glamo, reg, tmp); +} + +static void glamo_mci_reset(struct glamo_mci_host *host) +{ + glamo_engine_reset(host->core, GLAMO_ENGINE_MMC); + + glamo_reg_write(host, GLAMO_REG_MMC_WDATADS1, + (uint16_t)(host->data_mem->start)); + glamo_reg_write(host, GLAMO_REG_MMC_WDATADS2, + (uint16_t)(host->data_mem->start >> 16)); + + glamo_reg_write(host, GLAMO_REG_MMC_RDATADS1, + (uint16_t)(host->data_mem->start)); + glamo_reg_write(host, GLAMO_REG_MMC_RDATADS2, + (uint16_t)(host->data_mem->start >> 16)); + +} + +static void glamo_mci_clock_disable(struct glamo_mci_host *host) +{ + glamo_engine_suspend(host->core, GLAMO_ENGINE_MMC); +} + +static void glamo_mci_clock_enable(struct glamo_mci_host *host) +{ + del_timer_sync(&host->disable_timer); + + glamo_engine_enable(host->core, GLAMO_ENGINE_MMC); +} + +static void glamo_mci_disable_timer(unsigned long data) +{ + struct glamo_mci_host *host = (struct glamo_mci_host *)data; + glamo_mci_clock_disable(host); +} + + +static void do_pio_read(struct glamo_mci_host *host, struct mmc_data *data) +{ + struct sg_mapping_iter miter; + uint16_t __iomem *from_ptr = host->data_base; + + dev_dbg(&host->pdev->dev, "pio_read():\n"); + + sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG); + + while (sg_miter_next(&miter)) { + memcpy(miter.addr, from_ptr, miter.length); + from_ptr += miter.length >> 1; + + data->bytes_xfered += miter.length; + } + + sg_miter_stop(&miter); + + dev_dbg(&host->pdev->dev, "pio_read(): " + "complete (no more data).\n"); +} + +static void do_pio_write(struct glamo_mci_host *host, struct mmc_data *data) +{ + struct sg_mapping_iter miter; + uint16_t __iomem *to_ptr = host->data_base; + + dev_dbg(&host->pdev->dev, "pio_write():\n"); + sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG); + + while (sg_miter_next(&miter)) { + memcpy(to_ptr, miter.addr, miter.length); + to_ptr += miter.length >> 1; + + data->bytes_xfered += miter.length; + } + + sg_miter_stop(&miter); + dev_dbg(&host->pdev->dev, "pio_write(): complete\n"); +} + +static int glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq) +{ + int real_rate = 0; + + if (freq) { + glamo_mci_clock_enable(host); + real_rate = glamo_engine_reclock(host->core, GLAMO_ENGINE_MMC, + freq); + } else { + glamo_mci_clock_disable(host); + } + + return real_rate; +} + +static int glamo_mci_wait_idle(struct glamo_mci_host *host, + unsigned long timeout) +{ + uint16_t status; + do { + status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); + } while (!(status & GLAMO_STAT1_MMC_IDLE) && + time_is_after_jiffies(timeout)); + + if (time_is_before_eq_jiffies(timeout)) { + glamo_mci_reset(host); + return -ETIMEDOUT; + } + + return 0; +} + +static void glamo_mci_request_done(struct glamo_mci_host *host, struct +mmc_request *mrq) +{ + mod_timer(&host->disable_timer, jiffies + HZ / 16); + mmc_request_done(host->mmc, mrq); +} + + +static void glamo_mci_irq_worker(struct work_struct *work) +{ + struct glamo_mci_host *host = container_of(work, struct glamo_mci_host, + irq_work); + struct mmc_request *mrq; + struct mmc_command *cmd; + uint16_t status; + + if (!host->mrq || !host->mrq->cmd) + return; + + mrq = host->mrq; + cmd = mrq->cmd; + +#if 0 + if (cmd->data->flags & MMC_DATA_READ) + return; +#endif + + status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); + dev_dbg(&host->pdev->dev, "status = 0x%04x\n", status); + + /* we ignore a data timeout report if we are also told the data came */ + if (status & GLAMO_STAT1_MMC_RB_DRDY) + status &= ~GLAMO_STAT1_MMC_DTOUT; + + if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT)) + cmd->error = -ETIMEDOUT; + else if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) + cmd->error = -EILSEQ; + + if (cmd->error) { + dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status); + goto done; + } + + /* issue STOP if we have been given one to use */ + if (mrq->stop) + glamo_mci_send_command(host, mrq->stop); + + if (cmd->data->flags & MMC_DATA_READ) + do_pio_read(host, cmd->data); + + if (mrq->stop) + mrq->stop->error = glamo_mci_wait_idle(host, jiffies + HZ); + +done: + host->mrq = NULL; + glamo_mci_request_done(host, cmd->mrq); +} + +static void glamo_mci_read_worker(struct work_struct *work) +{ + struct glamo_mci_host *host = container_of(work, struct glamo_mci_host, + read_work); + struct mmc_command *cmd; + uint16_t status; + uint16_t blocks_ready; + size_t data_read = 0; + size_t data_ready; + struct scatterlist *sg; + uint16_t __iomem *from_ptr = host->data_base; + void *sg_pointer; + + + cmd = host->mrq->cmd; + sg = cmd->data->sg; + do { + status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); + + if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT)) + cmd->error = -ETIMEDOUT; + if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) + cmd->error = -EILSEQ; + if (cmd->error) { + dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", + status); + goto done; + } + + blocks_ready = glamo_reg_read(host, GLAMO_REG_MMC_RB_BLKCNT); + data_ready = blocks_ready * cmd->data->blksz; + + if (data_ready == data_read) + yield(); + + while (sg && data_read + sg->length <= data_ready) { + sg_pointer = page_address(sg_page(sg)) + sg->offset; + memcpy(sg_pointer, from_ptr, sg->length); + from_ptr += sg->length >> 1; + + data_read += sg->length; + sg = sg_next(sg); + } + + } while (sg); + cmd->data->bytes_xfered = data_read; + + do { + status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); + } while (!(status & GLAMO_STAT1_MMC_IDLE)); + + if (host->mrq->stop) + glamo_mci_send_command(host, host->mrq->stop); + + do { + status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); + } while (!(status & GLAMO_STAT1_MMC_IDLE)); +done: + host->mrq = NULL; + glamo_mci_request_done(host, cmd->mrq); +} + +static irqreturn_t glamo_mci_irq(int irq, void *devid) +{ + struct glamo_mci_host *host = (struct glamo_mci_host *)devid; + schedule_work(&host->irq_work); + + return IRQ_HANDLED; +} + +static void glamo_mci_send_command(struct glamo_mci_host *host, + struct mmc_command *cmd) +{ + uint8_t u8a[6]; + uint16_t fire = 0; + unsigned int timeout = 1000000; + uint16_t *reg_resp = (uint16_t *)(host->mmio_base + GLAMO_REG_MMC_CMD_RSP1); + uint16_t status; + int triggers_int = 1; + + /* if we can't do it, reject as busy */ + if (!(glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1) & + GLAMO_STAT1_MMC_IDLE)) { + cmd->error = -EBUSY; + return; + } + + /* create an array in wire order for CRC computation */ + u8a[0] = 0x40 | (cmd->opcode & 0x3f); + u8a[1] = (uint8_t)(cmd->arg >> 24); + u8a[2] = (uint8_t)(cmd->arg >> 16); + u8a[3] = (uint8_t)(cmd->arg >> 8); + u8a[4] = (uint8_t)cmd->arg; + u8a[5] = (crc7(0, u8a, 5) << 1) | 0x01; + + /* issue the wire-order array including CRC in register order */ + glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG1, ((u8a[4] << 8) | u8a[5])); + glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG2, ((u8a[2] << 8) | u8a[3])); + glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG3, ((u8a[0] << 8) | u8a[1])); + + /* command index toggle */ + fire |= (host->request_counter & 1) << 12; + + /* set type of command */ + switch (mmc_cmd_type(cmd)) { + case MMC_CMD_BC: + fire |= GLAMO_FIRE_MMC_CMDT_BNR; + break; + case MMC_CMD_BCR: + fire |= GLAMO_FIRE_MMC_CMDT_BR; + break; + case MMC_CMD_AC: + fire |= GLAMO_FIRE_MMC_CMDT_AND; + break; + case MMC_CMD_ADTC: + fire |= GLAMO_FIRE_MMC_CMDT_AD; + break; + } + /* + * if it expects a response, set the type expected + * + * R1, Length : 48bit, Normal response + * R1b, Length : 48bit, same R1, but added card busy status + * R2, Length : 136bit (really 128 bits with CRC snipped) + * R3, Length : 48bit (OCR register value) + * R4, Length : 48bit, SDIO_OP_CONDITION, Reverse SDIO Card + * R5, Length : 48bit, IO_RW_DIRECTION, Reverse SDIO Card + * R6, Length : 48bit (RCA register) + * R7, Length : 48bit (interface condition, VHS(voltage supplied), + * check pattern, CRC7) + */ + switch (mmc_resp_type(cmd)) { + case MMC_RSP_R1: /* same index as R6 and R7 */ + fire |= GLAMO_FIRE_MMC_RSPT_R1; + break; + case MMC_RSP_R1B: + fire |= GLAMO_FIRE_MMC_RSPT_R1b; + break; + case MMC_RSP_R2: + fire |= GLAMO_FIRE_MMC_RSPT_R2; + break; + case MMC_RSP_R3: + fire |= GLAMO_FIRE_MMC_RSPT_R3; + break; + /* R4 and R5 supported by chip not defined in linux/mmc/core.h (sdio) */ + } + /* + * From the command index, set up the command class in the host ctrllr + * + * missing guys present on chip but couldn't figure out how to use yet: + * 0x0 "stream read" + * 0x9 "cancel running command" + */ + switch (cmd->opcode) { + case MMC_READ_SINGLE_BLOCK: + fire |= GLAMO_FIRE_MMC_CC_SBR; /* single block read */ + break; + case MMC_SWITCH: /* 64 byte payload */ + case SD_APP_SEND_SCR: + case MMC_READ_MULTIPLE_BLOCK: + /* we will get an interrupt off this */ + if (!cmd->mrq->stop) { + /* multiblock no stop */ + fire |= GLAMO_FIRE_MMC_CC_MBRNS; + } else { + /* multiblock with stop */ + fire |= GLAMO_FIRE_MMC_CC_MBRS; + } + break; + case MMC_WRITE_BLOCK: + fire |= GLAMO_FIRE_MMC_CC_SBW; /* single block write */ + break; + case MMC_WRITE_MULTIPLE_BLOCK: + if (cmd->mrq->stop) { + /* multiblock with stop */ + fire |= GLAMO_FIRE_MMC_CC_MBWS; + } else { + /* multiblock NO stop-- 'RESERVED'? */ + fire |= GLAMO_FIRE_MMC_CC_MBWNS; + } + break; + case MMC_STOP_TRANSMISSION: + fire |= GLAMO_FIRE_MMC_CC_STOP; /* STOP */ + triggers_int = 0; + break; + default: + fire |= GLAMO_FIRE_MMC_CC_BASIC; /* "basic command" */ + triggers_int = 0; + break; + } + + if (cmd->data) + host->mrq = cmd->mrq; + + /* always largest timeout */ + glamo_reg_write(host, GLAMO_REG_MMC_TIMEOUT, 0xfff); + + /* Generate interrupt on txfer */ + glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC, 0xff36, + 0x0800 | + GLAMO_BASIC_MMC_NO_CLK_RD_WAIT | + GLAMO_BASIC_MMC_EN_COMPL_INT | + GLAMO_BASIC_MMC_EN_DATA_PUPS | + GLAMO_BASIC_MMC_EN_CMD_PUP); + + /* send the command out on the wire */ + /* dev_info(&host->pdev->dev, "Using FIRE %04X\n", fire); */ + glamo_reg_write(host, GLAMO_REG_MMC_CMD_FIRE, fire); + + /* we are deselecting card? because it isn't going to ack then... */ + if ((cmd->opcode == 7) && (cmd->arg == 0)) + return; + + /* + * we must spin until response is ready or timed out + * -- we don't get interrupts unless there is a bulk rx + */ + do + status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1); + while (((((status >> 15) & 1) != (host->request_counter & 1)) || + (!(status & (GLAMO_STAT1_MMC_RB_RRDY | + GLAMO_STAT1_MMC_RTOUT | + GLAMO_STAT1_MMC_DTOUT | + GLAMO_STAT1_MMC_BWERR | + GLAMO_STAT1_MMC_BRERR)))) && (timeout--)); + + if ((status & (GLAMO_STAT1_MMC_RTOUT | + GLAMO_STAT1_MMC_DTOUT)) || + (timeout == 0)) { + cmd->error = -ETIMEDOUT; + } else if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) { + cmd->error = -EILSEQ; + } + + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + cmd->resp[3] = readw(®_resp[0]) | + (readw(®_resp[1]) << 16); + cmd->resp[2] = readw(®_resp[2]) | + (readw(®_resp[3]) << 16); + cmd->resp[1] = readw(®_resp[4]) | + (readw(®_resp[5]) << 16); + cmd->resp[0] = readw(®_resp[6]) | + (readw(®_resp[7]) << 16); + } else { + cmd->resp[0] = (readw(®_resp[0]) >> 8) | + (readw(®_resp[1]) << 8) | + (readw(®_resp[2]) << 24); + } + } + +#if 0 + /* We'll only get an interrupt when all data has been transfered. + By starting to copy data when it's avaiable we can increase + throughput by up to 30%. */ + if (cmd->data && (cmd->data->flags & MMC_DATA_READ)) + schedule_work(&host->read_work); +#endif + +} + +static int glamo_mci_prepare_pio(struct glamo_mci_host *host, + struct mmc_data *data) +{ + /* set up the block info */ + glamo_reg_write(host, GLAMO_REG_MMC_DATBLKLEN, data->blksz); + glamo_reg_write(host, GLAMO_REG_MMC_DATBLKCNT, data->blocks); + + data->bytes_xfered = 0; + + /* if write, prep the write into the shared RAM before the command */ + if (data->flags & MMC_DATA_WRITE) + do_pio_write(host, data); + + dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n", + data->blksz, data->blocks); + return 0; +} + +static int glamo_mci_irq_poll(struct glamo_mci_host *host, + struct mmc_command *cmd) +{ + int timeout = 1000000; + uint16_t status; + /* + * if the glamo INT# line isn't wired (*cough* it can happen) + * I'm afraid we have to spin on the IRQ status bit and "be + * our own INT# line" + */ + /* + * we have faith we will get an "interrupt"... + * but something insane like suspend problems can mean + * we spin here forever, so we timeout after a LONG time + */ + do { + status = glamo_reg_read(host, GLAMO_REG_IRQ_STATUS); + } while ((--timeout) && !(status & GLAMO_IRQ_MMC)); + + if (timeout <= 0) { + if (cmd->data->error) + cmd->data->error = -ETIMEDOUT; + dev_err(&host->pdev->dev, "Payload timeout\n"); + return -ETIMEDOUT; + } + /* ack this interrupt source */ + writew(GLAMO_IRQ_MMC, host->core->base + + GLAMO_REG_IRQ_CLEAR); + + /* yay we are an interrupt controller! -- call the ISR + * it will stop clock to card + */ + glamo_mci_irq(host->irq, host); + + return 0; +} + +static void glamo_mci_send_request(struct mmc_host *mmc, + struct mmc_request *mrq) +{ + struct glamo_mci_host *host = mmc_priv(mmc); + struct mmc_command *cmd = mrq->cmd; + + glamo_mci_clock_enable(host); + host->request_counter++; + if (cmd->data) { + if (glamo_mci_prepare_pio(host, cmd->data)) { + cmd->error = -EIO; + cmd->data->error = -EIO; + goto done; + } + } + + dev_dbg(&host->pdev->dev, "cmd 0x%x, " + "arg 0x%x data=%p mrq->stop=%p flags 0x%x\n", + cmd->opcode, cmd->arg, cmd->data, cmd->mrq->stop, + cmd->flags); + + glamo_mci_send_command(host, cmd); + + /* + * if we don't have bulk data to take care of, we're done + */ + if (!cmd->data || cmd->error) + goto done; + + + if (!host->core->irq_works) { + if (glamo_mci_irq_poll(host, mrq->cmd)) + goto done; + } + + /* + * Otherwise can can use the interrupt as async completion -- + * if there is read data coming, or we wait for write data to complete, + * exit without mmc_request_done() as the payload interrupt + * will service it + */ + dev_dbg(&host->pdev->dev, "Waiting for payload data\n"); + return; +done: + if (!cmd->error) + cmd->error = glamo_mci_wait_idle(host, jiffies + 2 * HZ); + glamo_mci_request_done(host, mrq); +} + +static void glamo_mci_set_power_mode(struct glamo_mci_host *host, + unsigned char power_mode) +{ + int ret; + + if (power_mode == host->power_mode) + return; + + switch (power_mode) { + case MMC_POWER_UP: + if (host->power_mode == MMC_POWER_OFF) { + ret = regulator_enable(host->regulator); + if (ret) + dev_err(&host->pdev->dev, + "Failed to enable regulator: %d\n", + ret); + } + break; + case MMC_POWER_ON: + break; + case MMC_POWER_OFF: + default: + glamo_engine_disable(host->core, GLAMO_ENGINE_MMC); + + ret = regulator_disable(host->regulator); + if (ret) + dev_warn(&host->pdev->dev, + "Failed to disable regulator: %d\n", + ret); + break; + } + host->power_mode = power_mode; +} + +static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct glamo_mci_host *host = mmc_priv(mmc); + int bus_width = 0; + int rate; + int sd_drive; + int ret; + + /* Set power */ + glamo_mci_set_power_mode(host, ios->power_mode); + + if (host->vdd != ios->vdd) { + ret = mmc_regulator_set_ocr(host->regulator, ios->vdd); + if (ret) + dev_err(&host->pdev->dev, + "Failed to set regulator voltage: %d\n", ret); + else + host->vdd = ios->vdd; + } + rate = glamo_mci_set_card_clock(host, ios->clock); + + if ((ios->power_mode == MMC_POWER_ON) || + (ios->power_mode == MMC_POWER_UP)) { + dev_info(&host->pdev->dev, + "powered (vdd = %hu) clk: %dkHz div=%hu (req: %ukHz). " + "Bus width=%d\n", ios->vdd, + rate / 1000, 0, + ios->clock / 1000, (int)ios->bus_width); + } else { + dev_info(&host->pdev->dev, "glamo_mci_set_ios: power down.\n"); + } + + /* set bus width */ + if (ios->bus_width == MMC_BUS_WIDTH_4) + bus_width = GLAMO_BASIC_MMC_EN_4BIT_DATA; + + sd_drive = (rate * 4) / host->clk_rate; + if (sd_drive > 3) + sd_drive = 3; + + glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC, + GLAMO_BASIC_MMC_EN_4BIT_DATA | 0xb0, + bus_width | sd_drive << 6); +} + + +/* + * no physical write protect supported by us + */ +static int glamo_mci_get_ro(struct mmc_host *mmc) +{ + return 0; +} + +static struct mmc_host_ops glamo_mci_ops = { + .request = glamo_mci_send_request, + .set_ios = glamo_mci_set_ios, + .get_ro = glamo_mci_get_ro, +}; + +static int glamo_mci_probe(struct platform_device *pdev) +{ + struct mmc_host *mmc; + struct glamo_mci_host *host; + struct glamo_core *core = dev_get_drvdata(pdev->dev.parent); + int ret; + + dev_info(&pdev->dev, "glamo_mci driver (C)2007 Openmoko, Inc\n"); + + mmc = mmc_alloc_host(sizeof(struct glamo_mci_host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto probe_out; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + host->pdev = pdev; + if (core->pdata) + host->pdata = core->pdata->mmc_data; + host->power_mode = MMC_POWER_OFF; + host->clk_enabled = 0; + host->core = core; + host->irq = platform_get_irq(pdev, 0); + + INIT_WORK(&host->irq_work, glamo_mci_irq_worker); + INIT_WORK(&host->read_work, glamo_mci_read_worker); + + host->regulator = regulator_get(pdev->dev.parent, "SD_3V3"); + if (IS_ERR(host->regulator)) { + dev_err(&pdev->dev, "Cannot proceed without regulator.\n"); + ret = PTR_ERR(host->regulator); + goto probe_free_host; + } + + host->mmio_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!host->mmio_mem) { + dev_err(&pdev->dev, + "failed to get io memory region resouce.\n"); + ret = -ENOENT; + goto probe_regulator_put; + } + + host->mmio_mem = request_mem_region(host->mmio_mem->start, + resource_size(host->mmio_mem), + pdev->name); + + if (!host->mmio_mem) { + dev_err(&pdev->dev, "failed to request io memory region.\n"); + ret = -ENOENT; + goto probe_regulator_put; + } + + host->mmio_base = ioremap(host->mmio_mem->start, + resource_size(host->mmio_mem)); + if (!host->mmio_base) { + dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); + ret = -EINVAL; + goto probe_free_mem_region_mmio; + } + + + /* Get ahold of our data buffer we use for data in and out on MMC */ + host->data_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!host->data_mem) { + dev_err(&pdev->dev, + "failed to get io memory region resource.\n"); + ret = -ENOENT; + goto probe_iounmap_mmio; + } + + host->data_mem = request_mem_region(host->data_mem->start, + resource_size(host->data_mem), + pdev->name); + + if (!host->data_mem) { + dev_err(&pdev->dev, "failed to request io memory region.\n"); + ret = -ENOENT; + goto probe_iounmap_mmio; + } + host->data_base = ioremap(host->data_mem->start, + resource_size(host->data_mem)); + + if (host->data_base == 0) { + dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); + ret = -EINVAL; + goto probe_free_mem_region_data; + } + + ret = request_irq(host->irq, glamo_mci_irq, IRQF_SHARED, + pdev->name, host); + if (ret) { + dev_err(&pdev->dev, "failed to register irq.\n"); + goto probe_iounmap_data; + } + + + host->vdd = 0; + host->clk_rate = glamo_pll_rate(host->core, GLAMO_PLL1); + + /* explain our host controller capabilities */ + mmc->ops = &glamo_mci_ops; + mmc->ocr_avail = mmc_regulator_get_ocrmask(host->regulator); + mmc->caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | + MMC_CAP_SD_HIGHSPEED; + mmc->f_min = host->clk_rate / 256; + mmc->f_max = sd_max_clk; + + mmc->max_blk_count = (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */ + mmc->max_blk_size = (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */ + mmc->max_req_size = resource_size(host->data_mem); + mmc->max_seg_size = mmc->max_req_size; + mmc->max_phys_segs = 128; + mmc->max_hw_segs = 128; + + if (mmc->ocr_avail < 0) { + dev_warn(&pdev->dev, + "Failed to get ocr list for regulator: %d.\n", + mmc->ocr_avail); + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + } + + platform_set_drvdata(pdev, mmc); + + glamo_engine_enable(host->core, GLAMO_ENGINE_MMC); + glamo_mci_reset(host); + glamo_engine_disable(host->core, GLAMO_ENGINE_MMC); + + setup_timer(&host->disable_timer, glamo_mci_disable_timer, + (unsigned long)host); + + ret = mmc_add_host(mmc); + if (ret) { + dev_err(&pdev->dev, "failed to add mmc host.\n"); + goto probe_freeirq; + } + + return 0; + +probe_freeirq: + free_irq(host->irq, host); +probe_iounmap_data: + iounmap(host->data_base); +probe_free_mem_region_data: + release_mem_region(host->data_mem->start, + resource_size(host->data_mem)); +probe_iounmap_mmio: + iounmap(host->mmio_base); +probe_free_mem_region_mmio: + release_mem_region(host->mmio_mem->start, + resource_size(host->mmio_mem)); +probe_regulator_put: + regulator_put(host->regulator); +probe_free_host: + mmc_free_host(mmc); +probe_out: + return ret; +} + +static int glamo_mci_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct glamo_mci_host *host = mmc_priv(mmc); + + free_irq(host->irq, host); + + mmc_remove_host(mmc); + iounmap(host->mmio_base); + iounmap(host->data_base); + release_mem_region(host->mmio_mem->start, + resource_size(host->mmio_mem)); + release_mem_region(host->data_mem->start, + resource_size(host->data_mem)); + + regulator_put(host->regulator); + + mmc_free_host(mmc); + + glamo_engine_disable(host->core, GLAMO_ENGINE_MMC); + return 0; +} + + +#ifdef CONFIG_PM + +static int glamo_mci_suspend(struct device *dev) +{ + struct mmc_host *mmc = dev_get_drvdata(dev); + struct glamo_mci_host *host = mmc_priv(mmc); + int ret; + + cancel_work_sync(&host->irq_work); + + ret = mmc_suspend_host(mmc, PMSG_SUSPEND); + + return ret; +} + +static int glamo_mci_resume(struct device *dev) +{ + struct mmc_host *mmc = dev_get_drvdata(dev); + struct glamo_mci_host *host = mmc_priv(mmc); + int ret; + + + glamo_mci_reset(host); + glamo_engine_enable(host->core, GLAMO_ENGINE_MMC); + mdelay(10); + + ret = mmc_resume_host(host->mmc); + + return 0; +} + +static struct dev_pm_ops glamo_mci_pm_ops = { + .suspend = glamo_mci_suspend, + .resume = glamo_mci_resume, + .freeze = glamo_mci_suspend, + .thaw = glamo_mci_resume, +}; +#define GLAMO_MCI_PM_OPS (&glamo_mci_pm_ops) + +#else /* CONFIG_PM */ +#define GLAMO_MCI_PM_OPS NULL +#endif /* CONFIG_PM */ + + +static struct platform_driver glamo_mci_driver = { + .probe = glamo_mci_probe, + .remove = glamo_mci_remove, + .driver = { + .name = "glamo-mci", + .owner = THIS_MODULE, + .pm = GLAMO_MCI_PM_OPS, + }, +}; + +static int __init glamo_mci_init(void) +{ + platform_driver_register(&glamo_mci_driver); + return 0; +} +module_init(glamo_mci_init); + +static void __exit glamo_mci_exit(void) +{ + platform_driver_unregister(&glamo_mci_driver); +} +module_exit(glamo_mci_exit); + +MODULE_DESCRIPTION("Glamo MMC/SD Card Interface driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Andy Green <andy@openmoko.com>"); diff --git a/drivers/mfd/glamo/glamo-regs.h b/drivers/mfd/glamo/glamo-regs.h new file mode 100644 index 00000000000..59848e1122e --- /dev/null +++ b/drivers/mfd/glamo/glamo-regs.h @@ -0,0 +1,630 @@ +#ifndef _GLAMO_REGS_H +#define _GLAMO_REGS_H + +/* Smedia Glamo 336x/337x driver + * + * (C) 2007 by Openmoko, Inc. + * Author: Harald Welte <laforge@openmoko.org> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +enum glamo_regster_offsets { + GLAMO_REGOFS_GENERIC = 0x0000, + GLAMO_REGOFS_HOSTBUS = 0x0200, + GLAMO_REGOFS_MEMORY = 0x0300, + GLAMO_REGOFS_VIDCAP = 0x0400, + GLAMO_REGOFS_ISP = 0x0500, + GLAMO_REGOFS_JPEG = 0x0800, + GLAMO_REGOFS_MPEG = 0x0c00, + GLAMO_REGOFS_LCD = 0x1100, + GLAMO_REGOFS_MMC = 0x1400, + GLAMO_REGOFS_MPROC0 = 0x1500, + GLAMO_REGOFS_MPROC1 = 0x1580, + GLAMO_REGOFS_CMDQUEUE = 0x1600, + GLAMO_REGOFS_RISC = 0x1680, + GLAMO_REGOFS_2D = 0x1700, + GLAMO_REGOFS_3D = 0x1b00, + GLAMO_REGOFS_END = 0x2400, +}; + + +enum glamo_register_generic { + GLAMO_REG_GCONF1 = 0x0000, + GLAMO_REG_GCONF2 = 0x0002, +#define GLAMO_REG_DEVICE_ID GLAMO_REG_GCONF2 + GLAMO_REG_GCONF3 = 0x0004, +#define GLAMO_REG_REVISION_ID GLAMO_REG_GCONF3 + GLAMO_REG_IRQ_GEN1 = 0x0006, +#define GLAMO_REG_IRQ_ENABLE GLAMO_REG_IRQ_GEN1 + GLAMO_REG_IRQ_GEN2 = 0x0008, +#define GLAMO_REG_IRQ_SET GLAMO_REG_IRQ_GEN2 + GLAMO_REG_IRQ_GEN3 = 0x000a, +#define GLAMO_REG_IRQ_CLEAR GLAMO_REG_IRQ_GEN3 + GLAMO_REG_IRQ_GEN4 = 0x000c, +#define GLAMO_REG_IRQ_STATUS GLAMO_REG_IRQ_GEN4 + GLAMO_REG_CLOCK_HOST = 0x0010, + GLAMO_REG_CLOCK_MEMORY = 0x0012, + GLAMO_REG_CLOCK_LCD = 0x0014, + GLAMO_REG_CLOCK_MMC = 0x0016, + GLAMO_REG_CLOCK_ISP = 0x0018, + GLAMO_REG_CLOCK_JPEG = 0x001a, + GLAMO_REG_CLOCK_3D = 0x001c, + GLAMO_REG_CLOCK_2D = 0x001e, + GLAMO_REG_CLOCK_RISC1 = 0x0020, /* 3365 only? */ + GLAMO_REG_CLOCK_RISC2 = 0x0022, /* 3365 only? */ + GLAMO_REG_CLOCK_MPEG = 0x0024, + GLAMO_REG_CLOCK_MPROC = 0x0026, + + GLAMO_REG_CLOCK_GEN5_1 = 0x0030, + GLAMO_REG_CLOCK_GEN5_2 = 0x0032, + GLAMO_REG_CLOCK_GEN6 = 0x0034, + GLAMO_REG_CLOCK_GEN7 = 0x0036, + GLAMO_REG_CLOCK_GEN8 = 0x0038, + GLAMO_REG_CLOCK_GEN9 = 0x003a, + GLAMO_REG_CLOCK_GEN10 = 0x003c, + GLAMO_REG_CLOCK_GEN11 = 0x003e, + GLAMO_REG_PLL_GEN1 = 0x0040, + GLAMO_REG_PLL_GEN2 = 0x0042, + GLAMO_REG_PLL_GEN3 = 0x0044, + GLAMO_REG_PLL_GEN4 = 0x0046, + GLAMO_REG_PLL_GEN5 = 0x0048, + GLAMO_REG_GPIO_GEN1 = 0x0050, + GLAMO_REG_GPIO_GEN2 = 0x0052, + GLAMO_REG_GPIO_GEN3 = 0x0054, + GLAMO_REG_GPIO_GEN4 = 0x0056, + GLAMO_REG_GPIO_GEN5 = 0x0058, + GLAMO_REG_GPIO_GEN6 = 0x005a, + GLAMO_REG_GPIO_GEN7 = 0x005c, + GLAMO_REG_GPIO_GEN8 = 0x005e, + GLAMO_REG_GPIO_GEN9 = 0x0060, + GLAMO_REG_GPIO_GEN10 = 0x0062, + GLAMO_REG_DFT_GEN1 = 0x0070, + GLAMO_REG_DFT_GEN2 = 0x0072, + GLAMO_REG_DFT_GEN3 = 0x0074, + GLAMO_REG_DFT_GEN4 = 0x0076, + + GLAMO_REG_DFT_GEN5 = 0x01e0, + GLAMO_REG_DFT_GEN6 = 0x01f0, +}; + +#define GLAMO_REG_HOSTBUS(x) (GLAMO_REGOFS_HOSTBUS-2+(x*2)) + +#define REG_MEM(x) (GLAMO_REGOFS_MEMORY+(x)) +#define GLAMO_REG_MEM_TIMING(x) (GLAMO_REG_MEM_TIMING1-2+(x*2)) + +enum glamo_register_mem { + GLAMO_REG_MEM_TYPE = REG_MEM(0x00), + GLAMO_REG_MEM_GEN = REG_MEM(0x02), + GLAMO_REG_MEM_TIMING1 = REG_MEM(0x04), + GLAMO_REG_MEM_TIMING2 = REG_MEM(0x06), + GLAMO_REG_MEM_TIMING3 = REG_MEM(0x08), + GLAMO_REG_MEM_TIMING4 = REG_MEM(0x0a), + GLAMO_REG_MEM_TIMING5 = REG_MEM(0x0c), + GLAMO_REG_MEM_TIMING6 = REG_MEM(0x0e), + GLAMO_REG_MEM_TIMING7 = REG_MEM(0x10), + GLAMO_REG_MEM_TIMING8 = REG_MEM(0x12), + GLAMO_REG_MEM_TIMING9 = REG_MEM(0x14), + GLAMO_REG_MEM_TIMING10 = REG_MEM(0x16), + GLAMO_REG_MEM_TIMING11 = REG_MEM(0x18), + GLAMO_REG_MEM_POWER1 = REG_MEM(0x1a), + GLAMO_REG_MEM_POWER2 = REG_MEM(0x1c), + GLAMO_REG_MEM_LCD_BUF1 = REG_MEM(0x1e), + GLAMO_REG_MEM_LCD_BUF2 = REG_MEM(0x20), + GLAMO_REG_MEM_LCD_BUF3 = REG_MEM(0x22), + GLAMO_REG_MEM_LCD_BUF4 = REG_MEM(0x24), + GLAMO_REG_MEM_BIST1 = REG_MEM(0x26), + GLAMO_REG_MEM_BIST2 = REG_MEM(0x28), + GLAMO_REG_MEM_BIST3 = REG_MEM(0x2a), + GLAMO_REG_MEM_BIST4 = REG_MEM(0x2c), + GLAMO_REG_MEM_BIST5 = REG_MEM(0x2e), + GLAMO_REG_MEM_MAH1 = REG_MEM(0x30), + GLAMO_REG_MEM_MAH2 = REG_MEM(0x32), + GLAMO_REG_MEM_DRAM1 = REG_MEM(0x34), + GLAMO_REG_MEM_DRAM2 = REG_MEM(0x36), + GLAMO_REG_MEM_CRC = REG_MEM(0x38), +}; + +#define GLAMO_MEM_TYPE_MASK 0x03 + +enum glamo_reg_mem_dram1 { + /* b0 - b10 == refresh period, 1 -> 2048 clocks */ + GLAMO_MEM_DRAM1_EN_GATE_CLK = (1 << 11), + GLAMO_MEM_DRAM1_SELF_REFRESH = (1 << 12), + GLAMO_MEM_DRAM1_EN_GATE_CKE = (1 << 13), + GLAMO_MEM_DRAM1_EN_DRAM_REFRESH = (1 << 14), + GLAMO_MEM_DRAM1_EN_MODEREG_SET = (1 << 15), +}; + +enum glamo_reg_mem_dram2 { + GLAMO_MEM_DRAM2_DEEP_PWRDOWN = (1 << 12), +}; + +enum glamo_irq_index { + GLAMO_IRQIDX_HOSTBUS = 0, + GLAMO_IRQIDX_JPEG = 1, + GLAMO_IRQIDX_MPEG = 2, + GLAMO_IRQIDX_MPROC1 = 3, + GLAMO_IRQIDX_MPROC0 = 4, + GLAMO_IRQIDX_CMDQUEUE = 5, + GLAMO_IRQIDX_2D = 6, + GLAMO_IRQIDX_MMC = 7, + GLAMO_IRQIDX_RISC = 8, +}; + +enum glamo_irq { + GLAMO_IRQ_HOSTBUS = (1 << GLAMO_IRQIDX_HOSTBUS), + GLAMO_IRQ_JPEG = (1 << GLAMO_IRQIDX_JPEG), + GLAMO_IRQ_MPEG = (1 << GLAMO_IRQIDX_MPEG), + GLAMO_IRQ_MPROC1 = (1 << GLAMO_IRQIDX_MPROC1), + GLAMO_IRQ_MPROC0 = (1 << GLAMO_IRQIDX_MPROC0), + GLAMO_IRQ_CMDQUEUE = (1 << GLAMO_IRQIDX_CMDQUEUE), + GLAMO_IRQ_2D = (1 << GLAMO_IRQIDX_2D), + GLAMO_IRQ_MMC = (1 << GLAMO_IRQIDX_MMC), + GLAMO_IRQ_RISC = (1 << GLAMO_IRQIDX_RISC), +}; + +enum glamo_reg_clock_host { + GLAMO_CLOCK_HOST_DG_BCLK = 0x0001, + GLAMO_CLOCK_HOST_DG_M0CLK = 0x0004, + GLAMO_CLOCK_HOST_RESET = 0x1000, +}; + +enum glamo_reg_clock_mem { + GLAMO_CLOCK_MEM_DG_M1CLK = 0x0001, + GLAMO_CLOCK_MEM_EN_M1CLK = 0x0002, + GLAMO_CLOCK_MEM_DG_MOCACLK = 0x0004, + GLAMO_CLOCK_MEM_EN_MOCACLK = 0x0008, + GLAMO_CLOCK_MEM_RESET = 0x1000, + GLAMO_CLOCK_MOCA_RESET = 0x2000, +}; + +enum glamo_reg_clock_lcd { + GLAMO_CLOCK_LCD_DG_DCLK = 0x0001, + GLAMO_CLOCK_LCD_EN_DCLK = 0x0002, + GLAMO_CLOCK_LCD_DG_DMCLK = 0x0004, + GLAMO_CLOCK_LCD_EN_DMCLK = 0x0008, + GLAMO_CLOCK_LCD_EN_DHCLK = 0x0020, + GLAMO_CLOCK_LCD_DG_M5CLK = 0x0040, + GLAMO_CLOCK_LCD_EN_M5CLK = 0x0080, + GLAMO_CLOCK_LCD_RESET = 0x1000, +}; + +enum glamo_reg_clock_mmc { + GLAMO_CLOCK_MMC_DG_TCLK = 0x0001, + GLAMO_CLOCK_MMC_EN_TCLK = 0x0002, + GLAMO_CLOCK_MMC_DG_M9CLK = 0x0004, + GLAMO_CLOCK_MMC_EN_M9CLK = 0x0008, + GLAMO_CLOCK_MMC_RESET = 0x1000, +}; + +enum glamo_reg_basic_mmc { + /* set to disable CRC error rejection */ + GLAMO_BASIC_MMC_DISABLE_CRC = 0x0001, + /* enable completion interrupt */ + GLAMO_BASIC_MMC_EN_COMPL_INT = 0x0002, + /* stop MMC clock while enforced idle waiting for data from card */ + GLAMO_BASIC_MMC_NO_CLK_RD_WAIT = 0x0004, + /* 0 = 1-bit bus to card, 1 = use 4-bit bus (has to be negotiated) */ + GLAMO_BASIC_MMC_EN_4BIT_DATA = 0x0008, + /* enable 75K pullups on D3..D0 */ + GLAMO_BASIC_MMC_EN_DATA_PUPS = 0x0010, + /* enable 75K pullup on CMD */ + GLAMO_BASIC_MMC_EN_CMD_PUP = 0x0020, + /* IO drive strength 00=weak -> 11=strongest */ + GLAMO_BASIC_MMC_EN_DR_STR0 = 0x0040, + GLAMO_BASIC_MMC_EN_DR_STR1 = 0x0080, + /* TCLK delay stage A, 0000 = 500ps --> 1111 = 8ns */ + GLAMO_BASIC_MMC_EN_TCLK_DLYA0 = 0x0100, + GLAMO_BASIC_MMC_EN_TCLK_DLYA1 = 0x0200, + GLAMO_BASIC_MMC_EN_TCLK_DLYA2 = 0x0400, + GLAMO_BASIC_MMC_EN_TCLK_DLYA3 = 0x0800, + /* TCLK delay stage B (cumulative), 0000 = 500ps --> 1111 = 8ns */ + GLAMO_BASIC_MMC_EN_TCLK_DLYB0 = 0x1000, + GLAMO_BASIC_MMC_EN_TCLK_DLYB1 = 0x2000, + GLAMO_BASIC_MMC_EN_TCLK_DLYB2 = 0x4000, + GLAMO_BASIC_MMC_EN_TCLK_DLYB3 = 0x8000, +}; + +enum glamo_reg_stat1_mmc { + /* command "counter" (really: toggle) */ + GLAMO_STAT1_MMC_CMD_CTR = 0x8000, + /* engine is idle */ + GLAMO_STAT1_MMC_IDLE = 0x4000, + /* readback response is ready */ + GLAMO_STAT1_MMC_RB_RRDY = 0x0200, + /* readback data is ready */ + GLAMO_STAT1_MMC_RB_DRDY = 0x0100, + /* no response timeout */ + GLAMO_STAT1_MMC_RTOUT = 0x0020, + /* no data timeout */ + GLAMO_STAT1_MMC_DTOUT = 0x0010, + /* CRC error on block write */ + GLAMO_STAT1_MMC_BWERR = 0x0004, + /* CRC error on block read */ + GLAMO_STAT1_MMC_BRERR = 0x0002 +}; + +enum glamo_reg_fire_mmc { + /* command "counter" (really: toggle) + * the STAT1 register reflects this so you can ensure you don't look + * at status for previous command + */ + GLAMO_FIRE_MMC_CMD_CTR = 0x8000, + /* sets kind of response expected */ + GLAMO_FIRE_MMC_RES_MASK = 0x0700, + /* sets command type */ + GLAMO_FIRE_MMC_TYP_MASK = 0x00C0, + /* sets command class */ + GLAMO_FIRE_MMC_CLS_MASK = 0x000F, +}; + +enum glamo_fire_mmc_response_types { + GLAMO_FIRE_MMC_RSPT_R1 = 0x0000, + GLAMO_FIRE_MMC_RSPT_R1b = 0x0100, + GLAMO_FIRE_MMC_RSPT_R2 = 0x0200, + GLAMO_FIRE_MMC_RSPT_R3 = 0x0300, + GLAMO_FIRE_MMC_RSPT_R4 = 0x0400, + GLAMO_FIRE_MMC_RSPT_R5 = 0x0500, +}; + +enum glamo_fire_mmc_command_types { + /* broadcast, no response */ + GLAMO_FIRE_MMC_CMDT_BNR = 0x0000, + /* broadcast, with response */ + GLAMO_FIRE_MMC_CMDT_BR = 0x0040, + /* addressed, no data */ + GLAMO_FIRE_MMC_CMDT_AND = 0x0080, + /* addressed, with data */ + GLAMO_FIRE_MMC_CMDT_AD = 0x00C0, +}; + +enum glamo_fire_mmc_command_class { + /* "Stream Read" */ + GLAMO_FIRE_MMC_CC_STRR = 0x0000, + /* Single Block Read */ + GLAMO_FIRE_MMC_CC_SBR = 0x0001, + /* Multiple Block Read With Stop */ + GLAMO_FIRE_MMC_CC_MBRS = 0x0002, + /* Multiple Block Read No Stop */ + GLAMO_FIRE_MMC_CC_MBRNS = 0x0003, + /* RESERVED for "Stream Write" */ + GLAMO_FIRE_MMC_CC_STRW = 0x0004, + /* "Stream Write" */ + GLAMO_FIRE_MMC_CC_SBW = 0x0005, + /* RESERVED for Multiple Block Write With Stop */ + GLAMO_FIRE_MMC_CC_MBWS = 0x0006, + /* Multiple Block Write No Stop */ + GLAMO_FIRE_MMC_CC_MBWNS = 0x0007, + /* STOP command */ + GLAMO_FIRE_MMC_CC_STOP = 0x0008, + /* Cancel on Running Command */ + GLAMO_FIRE_MMC_CC_CANCL = 0x0009, + /* "Basic Command" */ + GLAMO_FIRE_MMC_CC_BASIC = 0x000a, +}; + +/* these are offsets from the start of the MMC register region */ +enum glamo_register_mmc { + /* MMC command, b15..8 = cmd arg b7..0; b7..1 = CRC; b0 = end bit */ + GLAMO_REG_MMC_CMD_REG1 = 0x00, + /* MMC command, b15..0 = cmd arg b23 .. 8 */ + GLAMO_REG_MMC_CMD_REG2 = 0x02, + /* MMC command, b15=start, b14=transmission, + * b13..8=cmd idx, b7..0=cmd arg b31..24 + */ + GLAMO_REG_MMC_CMD_REG3 = 0x04, + GLAMO_REG_MMC_CMD_FIRE = 0x06, + GLAMO_REG_MMC_CMD_RSP1 = 0x10, + GLAMO_REG_MMC_CMD_RSP2 = 0x12, + GLAMO_REG_MMC_CMD_RSP3 = 0x14, + GLAMO_REG_MMC_CMD_RSP4 = 0x16, + GLAMO_REG_MMC_CMD_RSP5 = 0x18, + GLAMO_REG_MMC_CMD_RSP6 = 0x1a, + GLAMO_REG_MMC_CMD_RSP7 = 0x1c, + GLAMO_REG_MMC_CMD_RSP8 = 0x1e, + GLAMO_REG_MMC_RB_STAT1 = 0x20, + GLAMO_REG_MMC_RB_BLKCNT = 0x22, + GLAMO_REG_MMC_RB_BLKLEN = 0x24, + GLAMO_REG_MMC_BASIC = 0x30, + GLAMO_REG_MMC_RDATADS1 = 0x34, + GLAMO_REG_MMC_RDATADS2 = 0x36, + GLAMO_REG_MMC_WDATADS1 = 0x38, + GLAMO_REG_MMC_WDATADS2 = 0x3a, + GLAMO_REG_MMC_DATBLKCNT = 0x3c, + GLAMO_REG_MMC_DATBLKLEN = 0x3e, + GLAMO_REG_MMC_TIMEOUT = 0x40, + +}; + +enum glamo_reg_clock_isp { + GLAMO_CLOCK_ISP_DG_I1CLK = 0x0001, + GLAMO_CLOCK_ISP_EN_I1CLK = 0x0002, + GLAMO_CLOCK_ISP_DG_CCLK = 0x0004, + GLAMO_CLOCK_ISP_EN_CCLK = 0x0008, + GLAMO_CLOCK_ISP_EN_SCLK = 0x0020, + GLAMO_CLOCK_ISP_DG_M2CLK = 0x0040, + GLAMO_CLOCK_ISP_EN_M2CLK = 0x0080, + GLAMO_CLOCK_ISP_DG_M15CLK = 0x0100, + GLAMO_CLOCK_ISP_EN_M15CLK = 0x0200, + GLAMO_CLOCK_ISP1_RESET = 0x1000, + GLAMO_CLOCK_ISP2_RESET = 0x2000, +}; + +enum glamo_reg_clock_jpeg { + GLAMO_CLOCK_JPEG_DG_JCLK = 0x0001, + GLAMO_CLOCK_JPEG_EN_JCLK = 0x0002, + GLAMO_CLOCK_JPEG_DG_M3CLK = 0x0004, + GLAMO_CLOCK_JPEG_EN_M3CLK = 0x0008, + GLAMO_CLOCK_JPEG_RESET = 0x1000, +}; + +enum glamo_reg_clock_2d { + GLAMO_CLOCK_2D_DG_GCLK = 0x0001, + GLAMO_CLOCK_2D_EN_GCLK = 0x0002, + GLAMO_CLOCK_2D_DG_M7CLK = 0x0004, + GLAMO_CLOCK_2D_EN_M7CLK = 0x0008, + GLAMO_CLOCK_2D_DG_M6CLK = 0x0010, + GLAMO_CLOCK_2D_EN_M6CLK = 0x0020, + GLAMO_CLOCK_2D_RESET = 0x1000, + GLAMO_CLOCK_2D_CQ_RESET = 0x2000, +}; + +enum glamo_reg_clock_3d { + GLAMO_CLOCK_3D_DG_ECLK = 0x0001, + GLAMO_CLOCK_3D_EN_ECLK = 0x0002, + GLAMO_CLOCK_3D_DG_RCLK = 0x0004, + GLAMO_CLOCK_3D_EN_RCLK = 0x0008, + GLAMO_CLOCK_3D_DG_M8CLK = 0x0010, + GLAMO_CLOCK_3D_EN_M8CLK = 0x0020, + GLAMO_CLOCK_3D_BACK_RESET = 0x1000, + GLAMO_CLOCK_3D_FRONT_RESET = 0x2000, +}; + +enum glamo_reg_clock_mpeg { + GLAMO_CLOCK_MPEG_DG_X0CLK = 0x0001, + GLAMO_CLOCK_MPEG_EN_X0CLK = 0x0002, + GLAMO_CLOCK_MPEG_DG_X1CLK = 0x0004, + GLAMO_CLOCK_MPEG_EN_X1CLK = 0x0008, + GLAMO_CLOCK_MPEG_DG_X2CLK = 0x0010, + GLAMO_CLOCK_MPEG_EN_X2CLK = 0x0020, + GLAMO_CLOCK_MPEG_DG_X3CLK = 0x0040, + GLAMO_CLOCK_MPEG_EN_X3CLK = 0x0080, + GLAMO_CLOCK_MPEG_DG_X4CLK = 0x0100, + GLAMO_CLOCK_MPEG_EN_X4CLK = 0x0200, + GLAMO_CLOCK_MPEG_DG_X6CLK = 0x0400, + GLAMO_CLOCK_MPEG_EN_X6CLK = 0x0800, + GLAMO_CLOCK_MPEG_ENC_RESET = 0x1000, + GLAMO_CLOCK_MPEG_DEC_RESET = 0x2000, +}; + +enum glamo_reg_clock51 { + GLAMO_CLOCK_GEN51_EN_DIV_MCLK = 0x0001, + GLAMO_CLOCK_GEN51_EN_DIV_SCLK = 0x0002, + GLAMO_CLOCK_GEN51_EN_DIV_JCLK = 0x0004, + GLAMO_CLOCK_GEN51_EN_DIV_DCLK = 0x0008, + GLAMO_CLOCK_GEN51_EN_DIV_DMCLK = 0x0010, + GLAMO_CLOCK_GEN51_EN_DIV_DHCLK = 0x0020, + GLAMO_CLOCK_GEN51_EN_DIV_GCLK = 0x0040, + GLAMO_CLOCK_GEN51_EN_DIV_TCLK = 0x0080, + /* FIXME: higher bits */ +}; + +enum glamo_reg_hostbus2 { + GLAMO_HOSTBUS2_MMIO_EN_ISP = 0x0001, + GLAMO_HOSTBUS2_MMIO_EN_JPEG = 0x0002, + GLAMO_HOSTBUS2_MMIO_EN_MPEG = 0x0004, + GLAMO_HOSTBUS2_MMIO_EN_LCD = 0x0008, + GLAMO_HOSTBUS2_MMIO_EN_MMC = 0x0010, + GLAMO_HOSTBUS2_MMIO_EN_MICROP0 = 0x0020, + GLAMO_HOSTBUS2_MMIO_EN_MICROP1 = 0x0040, + GLAMO_HOSTBUS2_MMIO_EN_CQ = 0x0080, + GLAMO_HOSTBUS2_MMIO_EN_RISC = 0x0100, + GLAMO_HOSTBUS2_MMIO_EN_2D = 0x0200, + GLAMO_HOSTBUS2_MMIO_EN_3D = 0x0400, +}; + +/* LCD Controller */ + +#define REG_LCD(x) (x) +enum glamo_reg_lcd { + GLAMO_REG_LCD_MODE1 = REG_LCD(0x00), + GLAMO_REG_LCD_MODE2 = REG_LCD(0x02), + GLAMO_REG_LCD_MODE3 = REG_LCD(0x04), + GLAMO_REG_LCD_WIDTH = REG_LCD(0x06), + GLAMO_REG_LCD_HEIGHT = REG_LCD(0x08), + GLAMO_REG_LCD_POLARITY = REG_LCD(0x0a), + GLAMO_REG_LCD_A_BASE1 = REG_LCD(0x0c), + GLAMO_REG_LCD_A_BASE2 = REG_LCD(0x0e), + GLAMO_REG_LCD_B_BASE1 = REG_LCD(0x10), + GLAMO_REG_LCD_B_BASE2 = REG_LCD(0x12), + GLAMO_REG_LCD_C_BASE1 = REG_LCD(0x14), + GLAMO_REG_LCD_C_BASE2 = REG_LCD(0x16), + GLAMO_REG_LCD_PITCH = REG_LCD(0x18), + /* RES */ + GLAMO_REG_LCD_HORIZ_TOTAL = REG_LCD(0x1c), + /* RES */ + GLAMO_REG_LCD_HORIZ_RETR_START = REG_LCD(0x20), + /* RES */ + GLAMO_REG_LCD_HORIZ_RETR_END = REG_LCD(0x24), + /* RES */ + GLAMO_REG_LCD_HORIZ_DISP_START = REG_LCD(0x28), + /* RES */ + GLAMO_REG_LCD_HORIZ_DISP_END = REG_LCD(0x2c), + /* RES */ + GLAMO_REG_LCD_VERT_TOTAL = REG_LCD(0x30), + /* RES */ + GLAMO_REG_LCD_VERT_RETR_START = REG_LCD(0x34), + /* RES */ + GLAMO_REG_LCD_VERT_RETR_END = REG_LCD(0x38), + /* RES */ + GLAMO_REG_LCD_VERT_DISP_START = REG_LCD(0x3c), + /* RES */ + GLAMO_REG_LCD_VERT_DISP_END = REG_LCD(0x40), + /* RES */ + GLAMO_REG_LCD_POL = REG_LCD(0x44), + GLAMO_REG_LCD_DATA_START = REG_LCD(0x46), + GLAMO_REG_LCD_FRATE_CONTRO = REG_LCD(0x48), + GLAMO_REG_LCD_DATA_CMD_HDR = REG_LCD(0x4a), + GLAMO_REG_LCD_SP_START = REG_LCD(0x4c), + GLAMO_REG_LCD_SP_END = REG_LCD(0x4e), + GLAMO_REG_LCD_CURSOR_BASE1 = REG_LCD(0x50), + GLAMO_REG_LCD_CURSOR_BASE2 = REG_LCD(0x52), + GLAMO_REG_LCD_CURSOR_PITCH = REG_LCD(0x54), + GLAMO_REG_LCD_CURSOR_X_SIZE = REG_LCD(0x56), + GLAMO_REG_LCD_CURSOR_Y_SIZE = REG_LCD(0x58), + GLAMO_REG_LCD_CURSOR_X_POS = REG_LCD(0x5a), + GLAMO_REG_LCD_CURSOR_Y_POS = REG_LCD(0x5c), + GLAMO_REG_LCD_CURSOR_PRESET = REG_LCD(0x5e), + GLAMO_REG_LCD_CURSOR_FG_COLOR = REG_LCD(0x60), + /* RES */ + GLAMO_REG_LCD_CURSOR_BG_COLOR = REG_LCD(0x64), + /* RES */ + GLAMO_REG_LCD_CURSOR_DST_COLOR = REG_LCD(0x68), + /* RES */ + GLAMO_REG_LCD_STATUS1 = REG_LCD(0x80), + GLAMO_REG_LCD_STATUS2 = REG_LCD(0x82), + GLAMO_REG_LCD_STATUS3 = REG_LCD(0x84), + GLAMO_REG_LCD_STATUS4 = REG_LCD(0x86), + /* RES */ + GLAMO_REG_LCD_COMMAND1 = REG_LCD(0xa0), + GLAMO_REG_LCD_COMMAND2 = REG_LCD(0xa2), + /* RES */ + GLAMO_REG_LCD_WFORM_DELAY1 = REG_LCD(0xb0), + GLAMO_REG_LCD_WFORM_DELAY2 = REG_LCD(0xb2), + /* RES */ + GLAMO_REG_LCD_GAMMA_CORR = REG_LCD(0x100), + /* RES */ + GLAMO_REG_LCD_GAMMA_R_ENTRY01 = REG_LCD(0x110), + GLAMO_REG_LCD_GAMMA_R_ENTRY23 = REG_LCD(0x112), + GLAMO_REG_LCD_GAMMA_R_ENTRY45 = REG_LCD(0x114), + GLAMO_REG_LCD_GAMMA_R_ENTRY67 = REG_LCD(0x116), + GLAMO_REG_LCD_GAMMA_R_ENTRY8 = REG_LCD(0x118), + /* RES */ + GLAMO_REG_LCD_GAMMA_G_ENTRY01 = REG_LCD(0x130), + GLAMO_REG_LCD_GAMMA_G_ENTRY23 = REG_LCD(0x132), + GLAMO_REG_LCD_GAMMA_G_ENTRY45 = REG_LCD(0x134), + GLAMO_REG_LCD_GAMMA_G_ENTRY67 = REG_LCD(0x136), + GLAMO_REG_LCD_GAMMA_G_ENTRY8 = REG_LCD(0x138), + /* RES */ + GLAMO_REG_LCD_GAMMA_B_ENTRY01 = REG_LCD(0x150), + GLAMO_REG_LCD_GAMMA_B_ENTRY23 = REG_LCD(0x152), + GLAMO_REG_LCD_GAMMA_B_ENTRY45 = REG_LCD(0x154), + GLAMO_REG_LCD_GAMMA_B_ENTRY67 = REG_LCD(0x156), + GLAMO_REG_LCD_GAMMA_B_ENTRY8 = REG_LCD(0x158), + /* RES */ + GLAMO_REG_LCD_SRAM_DRIVING1 = REG_LCD(0x160), + GLAMO_REG_LCD_SRAM_DRIVING2 = REG_LCD(0x162), + GLAMO_REG_LCD_SRAM_DRIVING3 = REG_LCD(0x164), +}; + +enum glamo_reg_lcd_mode1 { + GLAMO_LCD_MODE1_PWRSAVE = 0x0001, + GLAMO_LCD_MODE1_PARTIAL_PRT = 0x0002, + GLAMO_LCD_MODE1_HWFLIP = 0x0004, + GLAMO_LCD_MODE1_LCD2 = 0x0008, + /* RES */ + GLAMO_LCD_MODE1_PARTIAL_MODE = 0x0020, + GLAMO_LCD_MODE1_CURSOR_DSTCOLOR = 0x0040, + GLAMO_LCD_MODE1_PARTIAL_ENABLE = 0x0080, + GLAMO_LCD_MODE1_TVCLK_IN_ENABLE = 0x0100, + GLAMO_LCD_MODE1_HSYNC_HIGH_ACT = 0x0200, + GLAMO_LCD_MODE1_VSYNC_HIGH_ACT = 0x0400, + GLAMO_LCD_MODE1_HSYNC_FLIP = 0x0800, + GLAMO_LCD_MODE1_GAMMA_COR_EN = 0x1000, + GLAMO_LCD_MODE1_DITHER_EN = 0x2000, + GLAMO_LCD_MODE1_CURSOR_EN = 0x4000, + GLAMO_LCD_MODE1_ROTATE_EN = 0x8000, +}; + +enum glamo_reg_lcd_mode2 { + GLAMO_LCD_MODE2_CRC_CHECK_EN = 0x0001, + GLAMO_LCD_MODE2_DCMD_PER_LINE = 0x0002, + GLAMO_LCD_MODE2_NOUSE_BDEF = 0x0004, + GLAMO_LCD_MODE2_OUT_POS_MODE = 0x0008, + GLAMO_LCD_MODE2_FRATE_CTRL_EN = 0x0010, + GLAMO_LCD_MODE2_SINGLE_BUFFER = 0x0020, + GLAMO_LCD_MODE2_SER_LSB_TO_MSB = 0x0040, + /* FIXME */ +}; + +enum glamo_reg_lcd_mode3 { + /* LCD color source data format */ + GLAMO_LCD_SRC_RGB565 = 0x0000, + GLAMO_LCD_SRC_ARGB1555 = 0x4000, + GLAMO_LCD_SRC_ARGB4444 = 0x8000, + /* interface type */ + GLAMO_LCD_MODE3_LCD = 0x1000, + GLAMO_LCD_MODE3_RGB = 0x0800, + GLAMO_LCD_MODE3_CPU = 0x0000, + /* mode */ + GLAMO_LCD_MODE3_RGB332 = 0x0000, + GLAMO_LCD_MODE3_RGB444 = 0x0100, + GLAMO_LCD_MODE3_RGB565 = 0x0200, + GLAMO_LCD_MODE3_RGB666 = 0x0300, + /* depth */ + GLAMO_LCD_MODE3_6BITS = 0x0000, + GLAMO_LCD_MODE3_8BITS = 0x0010, + GLAMO_LCD_MODE3_9BITS = 0x0020, + GLAMO_LCD_MODE3_16BITS = 0x0030, + GLAMO_LCD_MODE3_18BITS = 0x0040, +}; + +enum glamo_lcd_rot_mode { + GLAMO_LCD_ROT_MODE_0 = 0x0000, + GLAMO_LCD_ROT_MODE_180 = 0x2000, + GLAMO_LCD_ROT_MODE_MIRROR = 0x4000, + GLAMO_LCD_ROT_MODE_FLIP = 0x6000, + GLAMO_LCD_ROT_MODE_90 = 0x8000, + GLAMO_LCD_ROT_MODE_270 = 0xa000, +}; +#define GLAMO_LCD_ROT_MODE_MASK 0xe000 + +enum glamo_lcd_cmd_type { + GLAMO_LCD_CMD_TYPE_DISP = 0x0000, + GLAMO_LCD_CMD_TYPE_PARALLEL = 0x4000, + GLAMO_LCD_CMD_TYPE_SERIAL = 0x8000, + GLAMO_LCD_CMD_TYPE_SERIAL_DIRECT = 0xc000, +}; +#define GLAMO_LCD_CMD_TYPE_MASK 0xc000 + +enum glamo_lcd_cmds { + GLAMO_LCD_CMD_DATA_DISP_FIRE = 0x00, + GLAMO_LCD_CMD_DATA_DISP_SYNC = 0x01, /* RGB only */ + /* switch to command mode, no display */ + GLAMO_LCD_CMD_DATA_FIRE_NO_DISP = 0x02, + /* display until VSYNC, switch to command */ + GLAMO_LCD_CMD_DATA_FIRE_VSYNC = 0x11, + /* display until HSYNC, switch to command */ + GLAMO_LCD_CMD_DATA_FIRE_HSYNC = 0x12, + /* display until VSYNC, 1 black frame, VSYNC, switch to command */ + GLAMO_LCD_CMD_DATA_FIRE_VSYNC_B = 0x13, + /* don't care about display and switch to command */ + GLAMO_LCD_CMD_DATA_FIRE_FREE = 0x14, /* RGB only */ + /* don't care about display, keep data display but disable data, + * and switch to command */ + GLAMO_LCD_CMD_DATA_FIRE_FREE_D = 0x15, /* RGB only */ +}; + +enum glamo_core_revisions { + GLAMO_CORE_REV_A0 = 0x0000, + GLAMO_CORE_REV_A1 = 0x0001, + GLAMO_CORE_REV_A2 = 0x0002, + GLAMO_CORE_REV_A3 = 0x0003, +}; + +#endif /* _GLAMO_REGS_H */ diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c index fe8f922f665..aed0d2a9b03 100644 --- a/drivers/mfd/pcf50633-adc.c +++ b/drivers/mfd/pcf50633-adc.c @@ -30,13 +30,13 @@ struct pcf50633_adc_request { int mux; int avg; - int result; void (*callback)(struct pcf50633 *, void *, int); void *callback_param; +}; - /* Used in case of sync requests */ +struct pcf50633_adc_sync_request { + int result; struct completion completion; - }; #define PCF50633_MAX_ADC_FIFO_DEPTH 8 @@ -109,10 +109,10 @@ adc_enqueue_request(struct pcf50633 *pcf, struct pcf50633_adc_request *req) return 0; } -static void -pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, int result) +static void pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, + int result) { - struct pcf50633_adc_request *req = param; + struct pcf50633_adc_sync_request *req = param; req->result = result; complete(&req->completion); @@ -120,28 +120,19 @@ pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, int result) int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg) { - struct pcf50633_adc_request *req; - int err; + struct pcf50633_adc_sync_request req; + int ret; - /* req is freed when the result is ready, in interrupt handler */ - req = kzalloc(sizeof(*req), GFP_KERNEL); - if (!req) - return -ENOMEM; - - req->mux = mux; - req->avg = avg; - req->callback = pcf50633_adc_sync_read_callback; - req->callback_param = req; + init_completion(&req.completion); - init_completion(&req->completion); - err = adc_enqueue_request(pcf, req); - if (err) - return err; + ret = pcf50633_adc_async_read(pcf, mux, avg, + pcf50633_adc_sync_read_callback, &req); + if (ret) + return ret; - wait_for_completion(&req->completion); + wait_for_completion(&req.completion); - /* FIXME by this time req might be already freed */ - return req->result; + return req.result; } EXPORT_SYMBOL_GPL(pcf50633_adc_sync_read); diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index 63a614d696c..9c14dbf02b0 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -21,16 +21,16 @@ #include <linux/workqueue.h> #include <linux/platform_device.h> #include <linux/i2c.h> -#include <linux/irq.h> #include <linux/slab.h> #include <linux/mfd/pcf50633/core.h> -/* Two MBCS registers used during cold start */ -#define PCF50633_REG_MBCS1 0x4b -#define PCF50633_REG_MBCS2 0x4c -#define PCF50633_MBCS1_USBPRES 0x01 -#define PCF50633_MBCS1_ADAPTPRES 0x01 +int pcf50633_irq_init(struct pcf50633 *pcf, int irq); +void pcf50633_irq_free(struct pcf50633 *pcf); +#ifdef CONFIG_PM +int pcf50633_irq_suspend(struct pcf50633 *pcf); +int pcf50633_irq_resume(struct pcf50633 *pcf); +#endif static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data) { @@ -215,247 +215,9 @@ static struct attribute_group pcf_attr_group = { .attrs = pcf_sysfs_entries, }; -int pcf50633_register_irq(struct pcf50633 *pcf, int irq, - void (*handler) (int, void *), void *data) -{ - if (irq < 0 || irq > PCF50633_NUM_IRQ || !handler) - return -EINVAL; - - if (WARN_ON(pcf->irq_handler[irq].handler)) - return -EBUSY; - - mutex_lock(&pcf->lock); - pcf->irq_handler[irq].handler = handler; - pcf->irq_handler[irq].data = data; - mutex_unlock(&pcf->lock); - - return 0; -} -EXPORT_SYMBOL_GPL(pcf50633_register_irq); - -int pcf50633_free_irq(struct pcf50633 *pcf, int irq) -{ - if (irq < 0 || irq > PCF50633_NUM_IRQ) - return -EINVAL; - - mutex_lock(&pcf->lock); - pcf->irq_handler[irq].handler = NULL; - mutex_unlock(&pcf->lock); - - return 0; -} -EXPORT_SYMBOL_GPL(pcf50633_free_irq); - -static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask) -{ - u8 reg, bits, tmp; - int ret = 0, idx; - - idx = irq >> 3; - reg = PCF50633_REG_INT1M + idx; - bits = 1 << (irq & 0x07); - - mutex_lock(&pcf->lock); - - if (mask) { - ret = __pcf50633_read(pcf, reg, 1, &tmp); - if (ret < 0) - goto out; - - tmp |= bits; - - ret = __pcf50633_write(pcf, reg, 1, &tmp); - if (ret < 0) - goto out; - - pcf->mask_regs[idx] &= ~bits; - pcf->mask_regs[idx] |= bits; - } else { - ret = __pcf50633_read(pcf, reg, 1, &tmp); - if (ret < 0) - goto out; - - tmp &= ~bits; - - ret = __pcf50633_write(pcf, reg, 1, &tmp); - if (ret < 0) - goto out; - - pcf->mask_regs[idx] &= ~bits; - } -out: - mutex_unlock(&pcf->lock); - - return ret; -} - -int pcf50633_irq_mask(struct pcf50633 *pcf, int irq) -{ - dev_dbg(pcf->dev, "Masking IRQ %d\n", irq); - - return __pcf50633_irq_mask_set(pcf, irq, 1); -} -EXPORT_SYMBOL_GPL(pcf50633_irq_mask); - -int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq) -{ - dev_dbg(pcf->dev, "Unmasking IRQ %d\n", irq); - - return __pcf50633_irq_mask_set(pcf, irq, 0); -} -EXPORT_SYMBOL_GPL(pcf50633_irq_unmask); - -int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq) -{ - u8 reg, bits; - - reg = irq >> 3; - bits = 1 << (irq & 0x07); - - return pcf->mask_regs[reg] & bits; -} -EXPORT_SYMBOL_GPL(pcf50633_irq_mask_get); - -static void pcf50633_irq_call_handler(struct pcf50633 *pcf, int irq) -{ - if (pcf->irq_handler[irq].handler) - pcf->irq_handler[irq].handler(irq, pcf->irq_handler[irq].data); -} - -/* Maximum amount of time ONKEY is held before emergency action is taken */ -#define PCF50633_ONKEY1S_TIMEOUT 8 - -static void pcf50633_irq_worker(struct work_struct *work) -{ - struct pcf50633 *pcf; - int ret, i, j; - u8 pcf_int[5], chgstat; - - pcf = container_of(work, struct pcf50633, irq_work); - - /* Read the 5 INT regs in one transaction */ - ret = pcf50633_read_block(pcf, PCF50633_REG_INT1, - ARRAY_SIZE(pcf_int), pcf_int); - if (ret != ARRAY_SIZE(pcf_int)) { - dev_err(pcf->dev, "Error reading INT registers\n"); - - /* - * If this doesn't ACK the interrupt to the chip, we'll be - * called once again as we're level triggered. - */ - goto out; - } - - /* defeat 8s death from lowsys on A5 */ - pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN, 0x04); - - /* We immediately read the usb and adapter status. We thus make sure - * only of USBINS/USBREM IRQ handlers are called */ - if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) { - chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2); - if (chgstat & (0x3 << 4)) - pcf_int[0] &= ~(1 << PCF50633_INT1_USBREM); - else - pcf_int[0] &= ~(1 << PCF50633_INT1_USBINS); - } - - /* Make sure only one of ADPINS or ADPREM is set */ - if (pcf_int[0] & (PCF50633_INT1_ADPINS | PCF50633_INT1_ADPREM)) { - chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2); - if (chgstat & (0x3 << 4)) - pcf_int[0] &= ~(1 << PCF50633_INT1_ADPREM); - else - pcf_int[0] &= ~(1 << PCF50633_INT1_ADPINS); - } - - dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x " - "INT4=0x%02x INT5=0x%02x\n", pcf_int[0], - pcf_int[1], pcf_int[2], pcf_int[3], pcf_int[4]); - - /* Some revisions of the chip don't have a 8s standby mode on - * ONKEY1S press. We try to manually do it in such cases. */ - if ((pcf_int[0] & PCF50633_INT1_SECOND) && pcf->onkey1s_held) { - dev_info(pcf->dev, "ONKEY1S held for %d secs\n", - pcf->onkey1s_held); - if (pcf->onkey1s_held++ == PCF50633_ONKEY1S_TIMEOUT) - if (pcf->pdata->force_shutdown) - pcf->pdata->force_shutdown(pcf); - } - - if (pcf_int[2] & PCF50633_INT3_ONKEY1S) { - dev_info(pcf->dev, "ONKEY1S held\n"); - pcf->onkey1s_held = 1 ; - - /* Unmask IRQ_SECOND */ - pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT1M, - PCF50633_INT1_SECOND); - - /* Unmask IRQ_ONKEYR */ - pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT2M, - PCF50633_INT2_ONKEYR); - } - - if ((pcf_int[1] & PCF50633_INT2_ONKEYR) && pcf->onkey1s_held) { - pcf->onkey1s_held = 0; - - /* Mask SECOND and ONKEYR interrupts */ - if (pcf->mask_regs[0] & PCF50633_INT1_SECOND) - pcf50633_reg_set_bit_mask(pcf, - PCF50633_REG_INT1M, - PCF50633_INT1_SECOND, - PCF50633_INT1_SECOND); - - if (pcf->mask_regs[1] & PCF50633_INT2_ONKEYR) - pcf50633_reg_set_bit_mask(pcf, - PCF50633_REG_INT2M, - PCF50633_INT2_ONKEYR, - PCF50633_INT2_ONKEYR); - } - - /* Have we just resumed ? */ - if (pcf->is_suspended) { - pcf->is_suspended = 0; - - /* Set the resume reason filtering out non resumers */ - for (i = 0; i < ARRAY_SIZE(pcf_int); i++) - pcf->resume_reason[i] = pcf_int[i] & - pcf->pdata->resumers[i]; - - /* Make sure we don't pass on any ONKEY events to - * userspace now */ - pcf_int[1] &= ~(PCF50633_INT2_ONKEYR | PCF50633_INT2_ONKEYF); - } - - for (i = 0; i < ARRAY_SIZE(pcf_int); i++) { - /* Unset masked interrupts */ - pcf_int[i] &= ~pcf->mask_regs[i]; - - for (j = 0; j < 8 ; j++) - if (pcf_int[i] & (1 << j)) - pcf50633_irq_call_handler(pcf, (i * 8) + j); - } - -out: - put_device(pcf->dev); - enable_irq(pcf->irq); -} - -static irqreturn_t pcf50633_irq(int irq, void *data) -{ - struct pcf50633 *pcf = data; - - dev_dbg(pcf->dev, "pcf50633_irq\n"); - - get_device(pcf->dev); - disable_irq_nosync(pcf->irq); - queue_work(pcf->work_queue, &pcf->irq_work); - - return IRQ_HANDLED; -} - static void pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name, - struct platform_device **pdev) + struct platform_device **pdev) { int ret; @@ -479,70 +241,17 @@ pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name, static int pcf50633_suspend(struct i2c_client *client, pm_message_t state) { struct pcf50633 *pcf; - int ret = 0, i; - u8 res[5]; - pcf = i2c_get_clientdata(client); - /* Make sure our interrupt handlers are not called - * henceforth */ - disable_irq(pcf->irq); - - /* Make sure that any running IRQ worker has quit */ - cancel_work_sync(&pcf->irq_work); - - /* Save the masks */ - ret = pcf50633_read_block(pcf, PCF50633_REG_INT1M, - ARRAY_SIZE(pcf->suspend_irq_masks), - pcf->suspend_irq_masks); - if (ret < 0) { - dev_err(pcf->dev, "error saving irq masks\n"); - goto out; - } - - /* Write wakeup irq masks */ - for (i = 0; i < ARRAY_SIZE(res); i++) - res[i] = ~pcf->pdata->resumers[i]; - - ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M, - ARRAY_SIZE(res), &res[0]); - if (ret < 0) { - dev_err(pcf->dev, "error writing wakeup irq masks\n"); - goto out; - } - - pcf->is_suspended = 1; - -out: - return ret; + return pcf50633_irq_suspend(pcf); } static int pcf50633_resume(struct i2c_client *client) { struct pcf50633 *pcf; - int ret; - pcf = i2c_get_clientdata(client); - /* Write the saved mask registers */ - ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M, - ARRAY_SIZE(pcf->suspend_irq_masks), - pcf->suspend_irq_masks); - if (ret < 0) - dev_err(pcf->dev, "Error restoring saved suspend masks\n"); - - /* Restore regulators' state */ - - - get_device(pcf->dev); - - /* - * Clear any pending interrupts and set resume reason if any. - * This will leave with enable_irq() - */ - pcf50633_irq_worker(&pcf->irq_work); - - return 0; + return pcf50633_irq_resume(pcf); } #else #define pcf50633_suspend NULL @@ -573,43 +282,19 @@ static int __devinit pcf50633_probe(struct i2c_client *client, i2c_set_clientdata(client, pcf); pcf->dev = &client->dev; pcf->i2c_client = client; - pcf->irq = client->irq; - pcf->work_queue = create_singlethread_workqueue("pcf50633"); - - if (!pcf->work_queue) { - dev_err(&client->dev, "Failed to alloc workqueue\n"); - ret = -ENOMEM; - goto err_free; - } - - INIT_WORK(&pcf->irq_work, pcf50633_irq_worker); version = pcf50633_reg_read(pcf, 0); variant = pcf50633_reg_read(pcf, 1); if (version < 0 || variant < 0) { dev_err(pcf->dev, "Unable to probe pcf50633\n"); ret = -ENODEV; - goto err_destroy_workqueue; + goto err_free; } dev_info(pcf->dev, "Probed device version %d variant %d\n", version, variant); - /* Enable all interrupts except RTC SECOND */ - pcf->mask_regs[0] = 0x80; - pcf50633_reg_write(pcf, PCF50633_REG_INT1M, pcf->mask_regs[0]); - pcf50633_reg_write(pcf, PCF50633_REG_INT2M, 0x00); - pcf50633_reg_write(pcf, PCF50633_REG_INT3M, 0x00); - pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00); - pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00); - - ret = request_irq(client->irq, pcf50633_irq, - IRQF_TRIGGER_LOW, "pcf50633", pcf); - - if (ret) { - dev_err(pcf->dev, "Failed to request IRQ %d\n", ret); - goto err_destroy_workqueue; - } + pcf50633_irq_init(pcf, client->irq); /* Create sub devices */ pcf50633_client_dev_register(pcf, "pcf50633-input", @@ -620,6 +305,10 @@ static int __devinit pcf50633_probe(struct i2c_client *client, &pcf->mbc_pdev); pcf50633_client_dev_register(pcf, "pcf50633-adc", &pcf->adc_pdev); + pcf50633_client_dev_register(pcf, "pcf50633-backlight", + &pcf->bl_pdev); + pcf50633_client_dev_register(pcf, "pcf50633-gpio", + &pcf->gpio_pdev); for (i = 0; i < PCF50633_NUM_REGULATORS; i++) { struct platform_device *pdev; @@ -638,10 +327,6 @@ static int __devinit pcf50633_probe(struct i2c_client *client, platform_device_add(pdev); } - if (enable_irq_wake(client->irq) < 0) - dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source" - "in this hardware revision", client->irq); - ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group); if (ret) dev_err(pcf->dev, "error creating sysfs entries\n"); @@ -651,8 +336,6 @@ static int __devinit pcf50633_probe(struct i2c_client *client, return 0; -err_destroy_workqueue: - destroy_workqueue(pcf->work_queue); err_free: i2c_set_clientdata(client, NULL); kfree(pcf); @@ -665,9 +348,9 @@ static int __devexit pcf50633_remove(struct i2c_client *client) struct pcf50633 *pcf = i2c_get_clientdata(client); int i; - free_irq(pcf->irq, pcf); - destroy_workqueue(pcf->work_queue); + pcf50633_irq_free(pcf); + platform_device_unregister(pcf->gpio_pdev); platform_device_unregister(pcf->input_pdev); platform_device_unregister(pcf->rtc_pdev); platform_device_unregister(pcf->mbc_pdev); diff --git a/drivers/mfd/pcf50633-gpio.c b/drivers/mfd/pcf50633-gpio.c deleted file mode 100644 index 9ab19a8f669..00000000000 --- a/drivers/mfd/pcf50633-gpio.c +++ /dev/null @@ -1,121 +0,0 @@ -/* NXP PCF50633 GPIO Driver - * - * (C) 2006-2008 by Openmoko, Inc. - * Author: Balaji Rao <balajirrao@openmoko.org> - * All rights reserved. - * - * Broken down from monstrous PCF50633 driver mainly by - * Harald Welte, Andy Green and Werner Almesberger - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> - -#include <linux/mfd/pcf50633/core.h> -#include <linux/mfd/pcf50633/gpio.h> - -enum pcf50633_regulator_id { - PCF50633_REGULATOR_AUTO, - PCF50633_REGULATOR_DOWN1, - PCF50633_REGULATOR_DOWN2, - PCF50633_REGULATOR_LDO1, - PCF50633_REGULATOR_LDO2, - PCF50633_REGULATOR_LDO3, - PCF50633_REGULATOR_LDO4, - PCF50633_REGULATOR_LDO5, - PCF50633_REGULATOR_LDO6, - PCF50633_REGULATOR_HCLDO, - PCF50633_REGULATOR_MEMLDO, -}; - -#define PCF50633_REG_AUTOOUT 0x1a -#define PCF50633_REG_DOWN1OUT 0x1e -#define PCF50633_REG_DOWN2OUT 0x22 -#define PCF50633_REG_MEMLDOOUT 0x26 -#define PCF50633_REG_LDO1OUT 0x2d -#define PCF50633_REG_LDO2OUT 0x2f -#define PCF50633_REG_LDO3OUT 0x31 -#define PCF50633_REG_LDO4OUT 0x33 -#define PCF50633_REG_LDO5OUT 0x35 -#define PCF50633_REG_LDO6OUT 0x37 -#define PCF50633_REG_HCLDOOUT 0x39 - -static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = { - [PCF50633_REGULATOR_AUTO] = PCF50633_REG_AUTOOUT, - [PCF50633_REGULATOR_DOWN1] = PCF50633_REG_DOWN1OUT, - [PCF50633_REGULATOR_DOWN2] = PCF50633_REG_DOWN2OUT, - [PCF50633_REGULATOR_MEMLDO] = PCF50633_REG_MEMLDOOUT, - [PCF50633_REGULATOR_LDO1] = PCF50633_REG_LDO1OUT, - [PCF50633_REGULATOR_LDO2] = PCF50633_REG_LDO2OUT, - [PCF50633_REGULATOR_LDO3] = PCF50633_REG_LDO3OUT, - [PCF50633_REGULATOR_LDO4] = PCF50633_REG_LDO4OUT, - [PCF50633_REGULATOR_LDO5] = PCF50633_REG_LDO5OUT, - [PCF50633_REGULATOR_LDO6] = PCF50633_REG_LDO6OUT, - [PCF50633_REGULATOR_HCLDO] = PCF50633_REG_HCLDOOUT, -}; - -int pcf50633_gpio_set(struct pcf50633 *pcf, int gpio, u8 val) -{ - u8 reg; - - reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG; - - return pcf50633_reg_set_bit_mask(pcf, reg, 0x07, val); -} -EXPORT_SYMBOL_GPL(pcf50633_gpio_set); - -u8 pcf50633_gpio_get(struct pcf50633 *pcf, int gpio) -{ - u8 reg, val; - - reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG; - val = pcf50633_reg_read(pcf, reg) & 0x07; - - return val; -} -EXPORT_SYMBOL_GPL(pcf50633_gpio_get); - -int pcf50633_gpio_invert_set(struct pcf50633 *pcf, int gpio, int invert) -{ - u8 val, reg; - - reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG; - val = !!invert << 3; - - return pcf50633_reg_set_bit_mask(pcf, reg, 1 << 3, val); -} -EXPORT_SYMBOL_GPL(pcf50633_gpio_invert_set); - -int pcf50633_gpio_invert_get(struct pcf50633 *pcf, int gpio) -{ - u8 reg, val; - - reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG; - val = pcf50633_reg_read(pcf, reg); - - return val & (1 << 3); -} -EXPORT_SYMBOL_GPL(pcf50633_gpio_invert_get); - -int pcf50633_gpio_power_supply_set(struct pcf50633 *pcf, - int gpio, int regulator, int on) -{ - u8 reg, val, mask; - - /* the *ENA register is always one after the *OUT register */ - reg = pcf50633_regulator_registers[regulator] + 1; - - val = !!on << (gpio - PCF50633_GPIO1); - mask = 1 << (gpio - PCF50633_GPIO1); - - return pcf50633_reg_set_bit_mask(pcf, reg, mask, val); -} -EXPORT_SYMBOL_GPL(pcf50633_gpio_power_supply_set); - -MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/pcf50633-irq.c b/drivers/mfd/pcf50633-irq.c new file mode 100644 index 00000000000..c1923cf1b06 --- /dev/null +++ b/drivers/mfd/pcf50633-irq.c @@ -0,0 +1,319 @@ +/* NXP PCF50633 Power Management Unit (PMU) driver + * + * (C) 2006-2008 by Openmoko, Inc. + * Author: Harald Welte <laforge@openmoko.org> + * Balaji Rao <balajirrao@openmoko.org> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mutex.h> +#include <linux/slab.h> + +#include <linux/mfd/pcf50633/core.h> + +/* Two MBCS registers used during cold start */ +#define PCF50633_REG_MBCS1 0x4b +#define PCF50633_REG_MBCS2 0x4c +#define PCF50633_MBCS1_USBPRES 0x01 +#define PCF50633_MBCS1_ADAPTPRES 0x01 + +int pcf50633_register_irq(struct pcf50633 *pcf, int irq, + void (*handler) (int, void *), void *data) +{ + if (irq < 0 || irq > PCF50633_NUM_IRQ || !handler) + return -EINVAL; + + if (WARN_ON(pcf->irq_handler[irq].handler)) + return -EBUSY; + + mutex_lock(&pcf->lock); + pcf->irq_handler[irq].handler = handler; + pcf->irq_handler[irq].data = data; + mutex_unlock(&pcf->lock); + + return 0; +} +EXPORT_SYMBOL_GPL(pcf50633_register_irq); + +int pcf50633_free_irq(struct pcf50633 *pcf, int irq) +{ + if (irq < 0 || irq > PCF50633_NUM_IRQ) + return -EINVAL; + + mutex_lock(&pcf->lock); + pcf->irq_handler[irq].handler = NULL; + mutex_unlock(&pcf->lock); + + return 0; +} +EXPORT_SYMBOL_GPL(pcf50633_free_irq); + +static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask) +{ + u8 reg, bit; + int ret = 0, idx; + + idx = irq >> 3; + reg = PCF50633_REG_INT1M + idx; + bit = 1 << (irq & 0x07); + + pcf50633_reg_set_bit_mask(pcf, reg, bit, mask ? bit : 0); + + mutex_lock(&pcf->lock); + + if (mask) + pcf->mask_regs[idx] |= bit; + else + pcf->mask_regs[idx] &= ~bit; + + mutex_unlock(&pcf->lock); + + return ret; +} + +int pcf50633_irq_mask(struct pcf50633 *pcf, int irq) +{ + dev_dbg(pcf->dev, "Masking IRQ %d\n", irq); + + return __pcf50633_irq_mask_set(pcf, irq, 1); +} +EXPORT_SYMBOL_GPL(pcf50633_irq_mask); + +int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq) +{ + dev_dbg(pcf->dev, "Unmasking IRQ %d\n", irq); + + return __pcf50633_irq_mask_set(pcf, irq, 0); +} +EXPORT_SYMBOL_GPL(pcf50633_irq_unmask); + +int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq) +{ + u8 reg, bits; + + reg = irq >> 3; + bits = 1 << (irq & 0x07); + + return pcf->mask_regs[reg] & bits; +} +EXPORT_SYMBOL_GPL(pcf50633_irq_mask_get); + +static void pcf50633_irq_call_handler(struct pcf50633 *pcf, int irq) +{ + if (pcf->irq_handler[irq].handler) + pcf->irq_handler[irq].handler(irq, pcf->irq_handler[irq].data); +} + +/* Maximum amount of time ONKEY is held before emergency action is taken */ +#define PCF50633_ONKEY1S_TIMEOUT 8 + +static irqreturn_t pcf50633_irq(int irq, void *data) +{ + struct pcf50633 *pcf = data; + int ret, i, j; + u8 pcf_int[5], chgstat; + + /* Read the 5 INT regs in one transaction */ + ret = pcf50633_read_block(pcf, PCF50633_REG_INT1, + ARRAY_SIZE(pcf_int), pcf_int); + if (ret != ARRAY_SIZE(pcf_int)) { + dev_err(pcf->dev, "Error reading INT registers\n"); + + /* + * If this doesn't ACK the interrupt to the chip, we'll be + * called once again as we're level triggered. + */ + goto out; + } + + /* defeat 8s death from lowsys on A5 */ + pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN, 0x04); + + /* We immediately read the usb and adapter status. We thus make sure + * only of USBINS/USBREM IRQ handlers are called */ + if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) { + chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2); + if (chgstat & (0x3 << 4)) + pcf_int[0] &= ~PCF50633_INT1_USBREM; + else + pcf_int[0] &= ~PCF50633_INT1_USBINS; + } + + /* Make sure only one of ADPINS or ADPREM is set */ + if (pcf_int[0] & (PCF50633_INT1_ADPINS | PCF50633_INT1_ADPREM)) { + chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2); + if (chgstat & (0x3 << 4)) + pcf_int[0] &= ~PCF50633_INT1_ADPREM; + else + pcf_int[0] &= ~PCF50633_INT1_ADPINS; + } + + dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x " + "INT4=0x%02x INT5=0x%02x\n", pcf_int[0], + pcf_int[1], pcf_int[2], pcf_int[3], pcf_int[4]); + + /* Some revisions of the chip don't have a 8s standby mode on + * ONKEY1S press. We try to manually do it in such cases. */ + if ((pcf_int[0] & PCF50633_INT1_SECOND) && pcf->onkey1s_held) { + dev_info(pcf->dev, "ONKEY1S held for %d secs\n", + pcf->onkey1s_held); + if (pcf->onkey1s_held++ == PCF50633_ONKEY1S_TIMEOUT) + if (pcf->pdata->force_shutdown) + pcf->pdata->force_shutdown(pcf); + } + + if (pcf_int[2] & PCF50633_INT3_ONKEY1S) { + dev_info(pcf->dev, "ONKEY1S held\n"); + pcf->onkey1s_held = 1 ; + + /* Unmask IRQ_SECOND */ + pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT1M, + PCF50633_INT1_SECOND); + + /* Unmask IRQ_ONKEYR */ + pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT2M, + PCF50633_INT2_ONKEYR); + } + + if ((pcf_int[1] & PCF50633_INT2_ONKEYR) && pcf->onkey1s_held) { + pcf->onkey1s_held = 0; + + /* Mask SECOND and ONKEYR interrupts */ + if (pcf->mask_regs[0] & PCF50633_INT1_SECOND) + pcf50633_reg_set_bit_mask(pcf, + PCF50633_REG_INT1M, + PCF50633_INT1_SECOND, + PCF50633_INT1_SECOND); + + if (pcf->mask_regs[1] & PCF50633_INT2_ONKEYR) + pcf50633_reg_set_bit_mask(pcf, + PCF50633_REG_INT2M, + PCF50633_INT2_ONKEYR, + PCF50633_INT2_ONKEYR); + } + + /* Have we just resumed ? */ + if (pcf->is_suspended) { + pcf->is_suspended = 0; + + /* Set the resume reason filtering out non resumers */ + for (i = 0; i < ARRAY_SIZE(pcf_int); i++) + pcf->resume_reason[i] = pcf_int[i] & + pcf->pdata->resumers[i]; + + /* Make sure we don't pass on any ONKEY events to + * userspace now */ + pcf_int[1] &= ~(PCF50633_INT2_ONKEYR | PCF50633_INT2_ONKEYF); + } + + for (i = 0; i < ARRAY_SIZE(pcf_int); i++) { + /* Unset masked interrupts */ + pcf_int[i] &= ~pcf->mask_regs[i]; + + for (j = 0; j < 8 ; j++) + if (pcf_int[i] & (1 << j)) + pcf50633_irq_call_handler(pcf, (i * 8) + j); + } + +out: + return IRQ_HANDLED; +} + +#ifdef CONFIG_PM + +int pcf50633_irq_suspend(struct pcf50633 *pcf) +{ + int ret; + int i; + u8 res[5]; + + + /* Make sure our interrupt handlers are not called + * henceforth */ + disable_irq(pcf->irq); + + /* Save the masks */ + ret = pcf50633_read_block(pcf, PCF50633_REG_INT1M, + ARRAY_SIZE(pcf->suspend_irq_masks), + pcf->suspend_irq_masks); + if (ret < 0) { + dev_err(pcf->dev, "error saving irq masks\n"); + goto out; + } + + /* Write wakeup irq masks */ + for (i = 0; i < ARRAY_SIZE(res); i++) + res[i] = ~pcf->pdata->resumers[i]; + + ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M, + ARRAY_SIZE(res), &res[0]); + if (ret < 0) { + dev_err(pcf->dev, "error writing wakeup irq masks\n"); + goto out; + } + + pcf->is_suspended = 1; + +out: + return ret; +} + +int pcf50633_irq_resume(struct pcf50633 *pcf) +{ + int ret; + + /* Write the saved mask registers */ + ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M, + ARRAY_SIZE(pcf->suspend_irq_masks), + pcf->suspend_irq_masks); + if (ret < 0) + dev_err(pcf->dev, "Error restoring saved suspend masks\n"); + + enable_irq(pcf->irq); + + return ret; +} + +#endif + +int pcf50633_irq_init(struct pcf50633 *pcf, int irq) +{ + int ret; + + pcf->irq = irq; + + /* Enable all interrupts except RTC SECOND */ + pcf->mask_regs[0] = 0x80; + pcf50633_reg_write(pcf, PCF50633_REG_INT1M, pcf->mask_regs[0]); + pcf50633_reg_write(pcf, PCF50633_REG_INT2M, 0x00); + pcf50633_reg_write(pcf, PCF50633_REG_INT3M, 0x00); + pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00); + pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00); + + ret = request_threaded_irq(irq, NULL, pcf50633_irq, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "pcf50633", pcf); + + if (ret) { + dev_err(pcf->dev, "Failed to request IRQ %d\n", ret); + } + + if (enable_irq_wake(irq) < 0) + dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source" + "in this hardware revision", irq); + + return ret; +} + +void pcf50633_irq_free(struct pcf50633 *pcf) +{ + free_irq(pcf->irq, pcf); +} diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index fa6e9c7fe51..ec4ac0934d2 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -816,7 +816,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, nmtd->mtd.owner = THIS_MODULE; nmtd->set = set; - if (hardware_ecc) { + if (!(info->platform && info->platform->software_ecc) && hardware_ecc) { chip->ecc.calculate = s3c2410_nand_calculate_ecc; chip->ecc.correct = s3c2410_nand_correct_data; chip->ecc.mode = NAND_ECC_HW; diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 5b19f5a54f6..06e65f96900 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -131,6 +131,17 @@ config CHARGER_PCF50633 help Say Y to include support for NXP PCF50633 Main Battery Charger. +config BATTERY_BQ27000_HDQ + tristate "BQ27000 HDQ battery monitor driver" + help + Say Y to enable support for the battery on the Neo Freerunner + +config HDQ_GPIO_BITBANG + bool "Generic gpio based HDQ bitbang" + help + Say Y to enable supoort for generic gpio based HDQ bitbang driver. + This can not be built as a module. + config BATTERY_PLATFORM tristate "Platform battery driver" help @@ -138,3 +149,4 @@ config BATTERY_PLATFORM information from platform functions. endif # POWER_SUPPLY + diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 610345aea4c..1a0ecf6c57e 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -32,4 +32,7 @@ obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o +obj-$(CONFIG_BATTERY_BQ27000_HDQ) += bq27000_battery.o obj-$(CONFIG_BATTERY_PLATFORM) += platform_battery.o + +obj-$(CONFIG_HDQ_GPIO_BITBANG) += hdq.o diff --git a/drivers/power/bq27000_battery.c b/drivers/power/bq27000_battery.c new file mode 100644 index 00000000000..ff5a7eff152 --- /dev/null +++ b/drivers/power/bq27000_battery.c @@ -0,0 +1,478 @@ +/* + * Driver for batteries with bq27000 chips inside via HDQ + * + * Copyright 2008 Openmoko, Inc + * Andy Green <andy@openmoko.com> + * + * based on ds2760 driver, original copyright notice for that ---> + * + * Copyright © 2007 Anton Vorontsov + * 2004-2007 Matt Reimer + * 2004 Szabolcs Gyurko + * + * Use consistent with the GNU GPL is permitted, + * provided that this copyright notice is + * preserved in its entirety in all copies and derived works. + * + * Author: Anton Vorontsov <cbou@mail.ru> + * February 2007 + * + * Matt Reimer <mreimer@vpop.net> + * April 2004, 2005, 2007 + * + * Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> + * September 2004 + */ + +#include <linux/module.h> +#include <linux/param.h> +#include <linux/jiffies.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/workqueue.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/bq27000_battery.h> +#include <linux/slab.h> + +enum bq27000_regs { + /* RAM regs */ + /* read-write after this */ + BQ27000_CTRL = 0, /* Device Control Register */ + BQ27000_MODE, /* Device Mode Register */ + BQ27000_AR_L, /* At-Rate H L */ + BQ27000_AR_H, + /* read-only after this */ + BQ27000_ARTTE_L, /* At-Rate Time To Empty H L */ + BQ27000_ARTTE_H, + BQ27000_TEMP_L, /* Reported Temperature H L */ + BQ27000_TEMP_H, + BQ27000_VOLT_L, /* Reported Voltage H L */ + BQ27000_VOLT_H, + BQ27000_FLAGS, /* Status Flags */ + BQ27000_RSOC, /* Relative State of Charge */ + BQ27000_NAC_L, /* Nominal Available Capacity H L */ + BQ27000_NAC_H, + BQ27000_CACD_L, /* Discharge Compensated H L */ + BQ27000_CACD_H, + BQ27000_CACT_L, /* Temperature Compensated H L */ + BQ27000_CACT_H, + BQ27000_LMD_L, /* Last measured discharge H L */ + BQ27000_LMD_H, + BQ27000_AI_L, /* Average Current H L */ + BQ27000_AI_H, + BQ27000_TTE_L, /* Time to Empty H L */ + BQ27000_TTE_H, + BQ27000_TTF_L, /* Time to Full H L */ + BQ27000_TTF_H, + BQ27000_SI_L, /* Standby Current H L */ + BQ27000_SI_H, + BQ27000_STTE_L, /* Standby Time To Empty H L */ + BQ27000_STTE_H, + BQ27000_MLI_L, /* Max Load Current H L */ + BQ27000_MLI_H, + BQ27000_MLTTE_L, /* Max Load Time To Empty H L */ + BQ27000_MLTTE_H, + BQ27000_SAE_L, /* Available Energy H L */ + BQ27000_SAE_H, + BQ27000_AP_L, /* Available Power H L */ + BQ27000_AP_H, + BQ27000_TTECP_L, /* Time to Empty at Constant Power H L */ + BQ27000_TTECP_H, + BQ27000_CYCL_L, /* Cycle count since learning cycle H L */ + BQ27000_CYCL_H, + BQ27000_CYCT_L, /* Cycle Count Total H L */ + BQ27000_CYCT_H, + BQ27000_CSOC, /* Compensated State Of Charge */ + /* EEPROM regs */ + /* read-write after this */ + BQ27000_EE_EE_EN = 0x6e, /* EEPROM Program Enable */ + BQ27000_EE_ILMD = 0x76, /* Initial Last Measured Discharge High Byte */ + BQ27000_EE_SEDVF, /* Scaled EDVF Threshold */ + BQ27000_EE_SEDV1, /* Scaled EDV1 Threshold */ + BQ27000_EE_ISLC, /* Initial Standby Load Current */ + BQ27000_EE_DMFSD, /* Digital Magnitude Filter and Self Discharge */ + BQ27000_EE_TAPER, /* Aging Estimate Enable, Charge Termination Taper */ + BQ27000_EE_PKCFG, /* Pack Configuration Values */ + BQ27000_EE_IMLC, /* Initial Max Load Current or ID #3 */ + BQ27000_EE_DCOMP, /* Discharge rate compensation constants or ID #2 */ + BQ27000_EE_TCOMP, /* Temperature Compensation constants or ID #1 */ +}; + +enum bq27000_status_flags { + BQ27000_STATUS_CHGS = 0x80, /* 1 = being charged */ + BQ27000_STATUS_NOACT = 0x40, /* 1 = no activity */ + BQ27000_STATUS_IMIN = 0x20, /* 1 = Lion taper current mode */ + BQ27000_STATUS_CI = 0x10, /* 1 = capacity likely innacurate */ + BQ27000_STATUS_CALIP = 0x08, /* 1 = calibration in progress */ + BQ27000_STATUS_VDQ = 0x04, /* 1 = capacity should be accurate */ + BQ27000_STATUS_EDV1 = 0x02, /* 1 = end of discharge.. <6% left */ + BQ27000_STATUS_EDVF = 0x01, /* 1 = no, it's really empty now */ +}; + +#define NANOVOLTS_UNIT 3750 + +struct bq27000_bat_regs { + int ai; + int flags; + int lmd; + int rsoc; + int temp; + int tte; + int ttf; + int volt; +}; + +struct bq27000_device_info { + struct device *dev; + struct power_supply bat; + struct power_supply ac; + struct power_supply usb; + struct delayed_work work; + struct bq27000_platform_data *pdata; + + struct bq27000_bat_regs regs; +}; + +static unsigned int cache_time = 5000; +module_param(cache_time, uint, 0644); +MODULE_PARM_DESC(cache_time, "cache time in milliseconds"); + +/* + * reading 16 bit values over HDQ has a special hazard where the + * hdq device firmware can update the 16-bit register during the time we + * read the two halves. TI document SLUS556D recommends the algorithm here + * to avoid trouble + */ + +static int hdq_read16(struct bq27000_device_info *di, int address) +{ + int acc; + int high; + int retries = 3; + + while (retries--) { + + high = (di->pdata->hdq_read)(address + 1); /* high part */ + + if (high < 0) + return high; + acc = (di->pdata->hdq_read)(address); + if (acc < 0) + return acc; + + /* confirm high didn't change between reading it and low */ + if (high == (di->pdata->hdq_read)(address + 1)) + return (high << 8) | acc; + } + + return -ETIME; +} + +static void bq27000_battery_external_power_changed(struct power_supply *psy) +{ + struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat); + + dev_dbg(di->dev, "%s\n", __FUNCTION__); + schedule_delayed_work(&di->work, 0); +} + +static int bq27000_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int n; + struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat); + + if (di->regs.rsoc < 0 && psp != POWER_SUPPLY_PROP_PRESENT) + return -ENODEV; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + + if (!di->pdata->get_charger_online_status) + goto use_bat; + if ((di->pdata->get_charger_online_status)()) { + /* + * charger is definitively present + * we report our state in terms of what it says it + * is doing + */ + if (!di->pdata->get_charger_active_status) + goto use_bat; + + if ((di->pdata->get_charger_active_status)()) { + val->intval = POWER_SUPPLY_STATUS_CHARGING; + break; + } + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + } + + /* + * platform provided definite indication of charger presence, + * and it is telling us it isn't there... but we are on so we + * must be running from battery ---> + */ + + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + +use_bat: + /* + * either the charger is not connected, or the + * platform doesn't give info about charger, use battery state + * but... battery state can be out of date by 4 seconds or + * so... use the platform callbacks if possible. + */ + + /* no real activity on the battery */ + if (di->regs.ai < 2) { + if (!di->regs.ttf) + val->intval = POWER_SUPPLY_STATUS_FULL; + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + } + /* power is actually going in or out... */ + if (di->regs.flags < 0) + return di->regs.flags; + if (di->regs.flags & BQ27000_STATUS_CHGS) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + case POWER_SUPPLY_PROP_HEALTH: + val->intval = POWER_SUPPLY_HEALTH_UNKNOWN; + /* Do we have accurate readings... */ + if (di->regs.flags < 0) + return di->regs.flags; + if (di->regs.flags & BQ27000_STATUS_VDQ) + val->intval = POWER_SUPPLY_HEALTH_GOOD; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + if (di->regs.volt < 0) + return di->regs.volt; + /* mV -> uV */ + val->intval = di->regs.volt * 1000; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + if (di->regs.flags < 0) + return di->regs.flags; + if (di->regs.flags & BQ27000_STATUS_CHGS) + n = -NANOVOLTS_UNIT; + else + n = NANOVOLTS_UNIT; + if (di->regs.ai < 0) + return di->regs.ai; + val->intval = (di->regs.ai * n) / di->pdata->rsense_mohms; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL: + if (di->regs.lmd < 0) + return di->regs.lmd; + val->intval = (di->regs.lmd * 3570) / di->pdata->rsense_mohms; + break; + case POWER_SUPPLY_PROP_TEMP: + if (di->regs.temp < 0) + return di->regs.temp; + /* K (in 0.25K units) is 273.15 up from C (in 0.1C)*/ + /* 10926 = 27315 * 4 / 10 */ + val->intval = (((long)di->regs.temp * 10l) - 10926) / 4; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + case POWER_SUPPLY_PROP_CAPACITY: + val->intval = di->regs.rsoc; + if (val->intval < 0) + return val->intval; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = !(di->regs.rsoc < 0); + break; + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: + if (di->regs.tte < 0) + return di->regs.tte; + val->intval = 60 * di->regs.tte; + break; + case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW: + if (di->regs.ttf < 0) + return di->regs.ttf; + val->intval = 60 * di->regs.ttf; + break; + case POWER_SUPPLY_PROP_ONLINE: + if (di->pdata->get_charger_online_status) + val->intval = (di->pdata->get_charger_online_status)(); + else + return -EINVAL; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void bq27000_battery_work(struct work_struct *work) +{ + struct bq27000_device_info *di = + container_of(work, struct bq27000_device_info, work.work); + + if ((di->pdata->hdq_initialized)()) { + struct bq27000_bat_regs regs; + + regs.ai = hdq_read16(di, BQ27000_AI_L); + regs.flags = (di->pdata->hdq_read)(BQ27000_FLAGS); + regs.lmd = hdq_read16(di, BQ27000_LMD_L); + regs.rsoc = (di->pdata->hdq_read)(BQ27000_RSOC); + regs.temp = hdq_read16(di, BQ27000_TEMP_L); + regs.tte = hdq_read16(di, BQ27000_TTE_L); + regs.ttf = hdq_read16(di, BQ27000_TTF_L); + regs.volt = hdq_read16(di, BQ27000_VOLT_L); + + if (memcmp (®s, &di->regs, sizeof(regs)) != 0) { + di->regs = regs; + power_supply_changed(&di->bat); + } + } + + if (!schedule_delayed_work(&di->work, cache_time)) + dev_err(di->dev, "battery service reschedule failed\n"); +} + +static enum power_supply_property bq27000_battery_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_ONLINE +}; + +static int bq27000_battery_probe(struct platform_device *pdev) +{ + int retval = 0; + struct bq27000_device_info *di; + struct bq27000_platform_data *pdata; + + dev_info(&pdev->dev, "BQ27000 Battery Driver (C) 2008 Openmoko, Inc\n"); + + di = kzalloc(sizeof(*di), GFP_KERNEL); + if (!di) { + retval = -ENOMEM; + goto di_alloc_failed; + } + + platform_set_drvdata(pdev, di); + + pdata = pdev->dev.platform_data; + di->dev = &pdev->dev; + /* di->w1_dev = pdev->dev.parent; */ + di->bat.name = pdata->name; + di->bat.type = POWER_SUPPLY_TYPE_BATTERY; + di->bat.properties = bq27000_battery_props; + di->bat.num_properties = ARRAY_SIZE(bq27000_battery_props); + di->bat.get_property = bq27000_battery_get_property; + di->bat.external_power_changed = + bq27000_battery_external_power_changed; + di->bat.use_for_apm = 1; + di->pdata = pdata; + + retval = power_supply_register(&pdev->dev, &di->bat); + if (retval) { + dev_err(di->dev, "failed to register battery\n"); + goto batt_failed; + } + + INIT_DELAYED_WORK(&di->work, bq27000_battery_work); + + if (!schedule_delayed_work(&di->work, 0)) + dev_err(di->dev, "failed to schedule bq27000_battery_work\n"); + + return 0; + +batt_failed: + kfree(di); +di_alloc_failed: + return retval; +} + +static int bq27000_battery_remove(struct platform_device *pdev) +{ + struct bq27000_device_info *di = platform_get_drvdata(pdev); + + cancel_delayed_work(&di->work); + + power_supply_unregister(&di->bat); + + return 0; +} + +void bq27000_charging_state_change(struct platform_device *pdev) +{ + struct bq27000_device_info *di = platform_get_drvdata(pdev); + + if (!di) + return; +} +EXPORT_SYMBOL_GPL(bq27000_charging_state_change); + +#ifdef CONFIG_PM + +static int bq27000_battery_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct bq27000_device_info *di = platform_get_drvdata(pdev); + + cancel_delayed_work(&di->work); + return 0; +} + +static int bq27000_battery_resume(struct platform_device *pdev) +{ + struct bq27000_device_info *di = platform_get_drvdata(pdev); + + schedule_delayed_work(&di->work, 0); + return 0; +} + +#else + +#define bq27000_battery_suspend NULL +#define bq27000_battery_resume NULL + +#endif /* CONFIG_PM */ + +static struct platform_driver bq27000_battery_driver = { + .driver = { + .name = "bq27000-battery", + }, + .probe = bq27000_battery_probe, + .remove = bq27000_battery_remove, + .suspend = bq27000_battery_suspend, + .resume = bq27000_battery_resume, +}; + +static int __init bq27000_battery_init(void) +{ + return platform_driver_register(&bq27000_battery_driver); +} + +static void __exit bq27000_battery_exit(void) +{ + platform_driver_unregister(&bq27000_battery_driver); +} + +module_init(bq27000_battery_init); +module_exit(bq27000_battery_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Andy Green <andy@openmoko.com>"); +MODULE_DESCRIPTION("bq27000 battery driver"); diff --git a/drivers/power/hdq.c b/drivers/power/hdq.c new file mode 100644 index 00000000000..cea024fec76 --- /dev/null +++ b/drivers/power/hdq.c @@ -0,0 +1,512 @@ +/* + * HDQ generic GPIO bitbang driver using FIQ + * + * (C) 2006-2007 by Openmoko, Inc. + * Author: Andy Green <andy@openmoko.com> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/hdq.h> + +#define HDQ_READ 0 +#define HDQ_WRITE 0x80 + +enum hdq_bitbang_states { + HDQB_IDLE = 0, + HDQB_TX_BREAK, + HDQB_TX_BREAK_RECOVERY, + HDQB_ADS_CALC, + HDQB_ADS_LOW, + HDQB_ADS_HIGH, + HDQB_WAIT_RX, + HDQB_DATA_RX_LOW, + HDQB_DATA_RX_HIGH, + HDQB_WAIT_TX, +}; + +static struct hdq_priv { + u8 hdq_probed; /* nonzero after HDQ driver probed */ + struct mutex hdq_lock; /* if you want to use hdq, you have to take lock */ + u8 hdq_ads; /* b7..b6 = register address, b0 = r/w */ + u8 hdq_tx_data; /* data to tx for write action */ + u8 hdq_rx_data; /* data received in read action */ + u8 hdq_request_ctr; /* incremented by "user" to request a transfer */ + u8 hdq_transaction_ctr; /* incremented after each transfer */ + u8 hdq_error; /* 0 = no error */ + u8 hdq_ctr; + u8 hdq_ctr2; + u8 hdq_bit; + u8 hdq_shifter; + u8 hdq_tx_data_done; + enum hdq_bitbang_states hdq_state; + int reported_error; + + struct hdq_platform_data *pdata; +} hdq_priv; + + +static void hdq_bad(void) +{ + if (!hdq_priv.reported_error) + printk(KERN_ERR "HDQ error: %d\n", hdq_priv.hdq_error); + hdq_priv.reported_error = 1; +} + +static void hdq_good(void) +{ + if (hdq_priv.reported_error) + printk(KERN_INFO "HDQ responds again\n"); + hdq_priv.reported_error = 0; +} + +int hdq_fiq_handler(void) +{ + if (!hdq_priv.hdq_probed) + return 0; + + switch (hdq_priv.hdq_state) { + case HDQB_IDLE: + if (hdq_priv.hdq_request_ctr == hdq_priv.hdq_transaction_ctr) + break; + hdq_priv.hdq_ctr = 250 / HDQ_SAMPLE_PERIOD_US; + hdq_priv.pdata->gpio_set(0); + hdq_priv.pdata->gpio_dir_out(); + hdq_priv.hdq_tx_data_done = 0; + hdq_priv.hdq_state = HDQB_TX_BREAK; + break; + + case HDQB_TX_BREAK: /* issue low for > 190us */ + if (--hdq_priv.hdq_ctr == 0) { + hdq_priv.hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US; + hdq_priv.hdq_state = HDQB_TX_BREAK_RECOVERY; + hdq_priv.pdata->gpio_set(1); + } + break; + + case HDQB_TX_BREAK_RECOVERY: /* issue low for > 40us */ + if (--hdq_priv.hdq_ctr) + break; + hdq_priv.hdq_shifter = hdq_priv.hdq_ads; + hdq_priv.hdq_bit = 8; /* 8 bits of ads / rw */ + hdq_priv.hdq_tx_data_done = 0; /* doing ads */ + /* fallthru on last one */ + case HDQB_ADS_CALC: + if (hdq_priv.hdq_shifter & 1) + hdq_priv.hdq_ctr = 50 / HDQ_SAMPLE_PERIOD_US; + else + hdq_priv.hdq_ctr = 120 / HDQ_SAMPLE_PERIOD_US; + /* carefully precompute the other phase length */ + hdq_priv.hdq_ctr2 = (210 - (hdq_priv.hdq_ctr * HDQ_SAMPLE_PERIOD_US)) / + HDQ_SAMPLE_PERIOD_US; + hdq_priv.hdq_state = HDQB_ADS_LOW; + hdq_priv.hdq_shifter >>= 1; + hdq_priv.hdq_bit--; + hdq_priv.pdata->gpio_set(0); + break; + + case HDQB_ADS_LOW: + if (--hdq_priv.hdq_ctr) + break; + hdq_priv.pdata->gpio_set(1); + hdq_priv.hdq_state = HDQB_ADS_HIGH; + break; + + case HDQB_ADS_HIGH: + if (--hdq_priv.hdq_ctr2 > 1) /* account for HDQB_ADS_CALC */ + break; + if (hdq_priv.hdq_bit) { /* more bits to do */ + hdq_priv.hdq_state = HDQB_ADS_CALC; + break; + } + /* no more bits, wait it out until hdq_priv.hdq_ctr2 exhausted */ + if (hdq_priv.hdq_ctr2) + break; + /* ok no more bits and very last state */ + hdq_priv.hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US; + /* FIXME 0 = read */ + if (hdq_priv.hdq_ads & 0x80) { /* write the byte out */ + /* set delay before payload */ + hdq_priv.hdq_ctr = 300 / HDQ_SAMPLE_PERIOD_US; + /* already high, no need to write */ + hdq_priv.hdq_state = HDQB_WAIT_TX; + break; + } + /* read the next byte */ + hdq_priv.hdq_bit = 8; /* 8 bits of data */ + hdq_priv.hdq_ctr = 2500 / HDQ_SAMPLE_PERIOD_US; + hdq_priv.hdq_state = HDQB_WAIT_RX; + hdq_priv.pdata->gpio_dir_in(); + break; + + case HDQB_WAIT_TX: /* issue low for > 40us */ + if (--hdq_priv.hdq_ctr) + break; + if (!hdq_priv.hdq_tx_data_done) { /* was that the data sent? */ + hdq_priv.hdq_tx_data_done++; + hdq_priv.hdq_shifter = hdq_priv.hdq_tx_data; + hdq_priv.hdq_bit = 8; /* 8 bits of data */ + hdq_priv.hdq_state = HDQB_ADS_CALC; /* start sending */ + break; + } + hdq_priv.hdq_error = 0; + hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr; + hdq_priv.hdq_state = HDQB_IDLE; /* all tx is done */ + /* idle in input mode, it's pulled up by 10K */ + hdq_priv.pdata->gpio_dir_in(); + break; + + case HDQB_WAIT_RX: /* wait for battery to talk to us */ + if (hdq_priv.pdata->gpio_get() == 0) { + /* it talks to us! */ + hdq_priv.hdq_ctr2 = 1; + hdq_priv.hdq_bit = 8; /* 8 bits of data */ + /* timeout */ + hdq_priv.hdq_ctr = 500 / HDQ_SAMPLE_PERIOD_US; + hdq_priv.hdq_state = HDQB_DATA_RX_LOW; + break; + } + if (--hdq_priv.hdq_ctr == 0) { /* timed out, error */ + hdq_priv.hdq_error = 1; + hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr; + hdq_priv.hdq_state = HDQB_IDLE; /* abort */ + } + break; + + /* + * HDQ basically works by measuring the low time of the bit cell + * 32-50us --> '1', 80 - 145us --> '0' + */ + + case HDQB_DATA_RX_LOW: + if (hdq_priv.pdata->gpio_get()) { + hdq_priv.hdq_rx_data >>= 1; + if (hdq_priv.hdq_ctr2 <= (65 / HDQ_SAMPLE_PERIOD_US)) + hdq_priv.hdq_rx_data |= 0x80; + + if (--hdq_priv.hdq_bit == 0) { + hdq_priv.hdq_error = 0; + hdq_priv.hdq_transaction_ctr = + hdq_priv.hdq_request_ctr; + + hdq_priv.hdq_state = HDQB_IDLE; + } else + hdq_priv.hdq_state = HDQB_DATA_RX_HIGH; + /* timeout */ + hdq_priv.hdq_ctr = 1000 / HDQ_SAMPLE_PERIOD_US; + hdq_priv.hdq_ctr2 = 1; + break; + } + hdq_priv.hdq_ctr2++; + if (--hdq_priv.hdq_ctr) + break; + /* timed out, error */ + hdq_priv.hdq_error = 2; + hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr; + hdq_priv.hdq_state = HDQB_IDLE; /* abort */ + break; + + case HDQB_DATA_RX_HIGH: + if (!hdq_priv.pdata->gpio_get()) { + /* it talks to us! */ + hdq_priv.hdq_ctr2 = 1; + /* timeout */ + hdq_priv.hdq_ctr = 400 / HDQ_SAMPLE_PERIOD_US; + hdq_priv.hdq_state = HDQB_DATA_RX_LOW; + break; + } + if (--hdq_priv.hdq_ctr) + break; + /* timed out, error */ + hdq_priv.hdq_error = 3; + hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr; + + /* we're in input mode already */ + hdq_priv.hdq_state = HDQB_IDLE; /* abort */ + break; + } + + /* Are we interested in keeping the FIQ source alive ? */ + if (hdq_priv.hdq_state != HDQB_IDLE) + return 1; + else + return 0; +} +static int fiq_busy(void) +{ + int request = (volatile u8)hdq_priv.hdq_request_ctr; + int transact = (volatile u8)hdq_priv.hdq_transaction_ctr; + + + return (request != transact); +} + +int hdq_initialized(void) +{ + return hdq_priv.hdq_probed; +} +EXPORT_SYMBOL_GPL(hdq_initialized); + +int hdq_read(int address) +{ + int count_sleeps = 5; + int ret = -ETIME; + + if (!hdq_priv.hdq_probed) + return -EINVAL; + + mutex_lock(&hdq_priv.hdq_lock); + + hdq_priv.hdq_error = 0; + hdq_priv.hdq_ads = address | HDQ_READ; + hdq_priv.hdq_request_ctr++; + hdq_priv.pdata->kick_fiq(); + /* + * FIQ takes care of it while we block our calling process + * But we're not spinning -- other processes run normally while + * we wait for the result + */ + while (count_sleeps--) { + msleep(10); /* valid transaction always completes in < 10ms */ + + if (fiq_busy()) + continue; + + if (hdq_priv.hdq_error) { + hdq_bad(); + goto done; /* didn't see a response in good time */ + } + hdq_good(); + + ret = hdq_priv.hdq_rx_data; + goto done; + } + +done: + mutex_unlock(&hdq_priv.hdq_lock); + return ret; +} +EXPORT_SYMBOL_GPL(hdq_read); + +int hdq_write(int address, u8 data) +{ + int count_sleeps = 5; + int ret = -ETIME; + + if (!hdq_priv.hdq_probed) + return -EINVAL; + + mutex_lock(&hdq_priv.hdq_lock); + + hdq_priv.hdq_error = 0; + hdq_priv.hdq_ads = address | HDQ_WRITE; + hdq_priv.hdq_tx_data = data; + hdq_priv.hdq_request_ctr++; + hdq_priv.pdata->kick_fiq(); + /* + * FIQ takes care of it while we block our calling process + * But we're not spinning -- other processes run normally while + * we wait for the result + */ + while (count_sleeps--) { + msleep(10); /* valid transaction always completes in < 10ms */ + + if (fiq_busy()) + continue; /* something bad with FIQ */ + + if (hdq_priv.hdq_error) { + hdq_bad(); + goto done; /* didn't see a response in good time */ + } + hdq_good(); + + ret = 0; + goto done; + } + +done: + mutex_unlock(&hdq_priv.hdq_lock); + return ret; +} +EXPORT_SYMBOL_GPL(hdq_write); + +/* sysfs */ + +static ssize_t hdq_sysfs_dump(struct device *dev, struct device_attribute *attr, + char *buf) +{ + int n; + int v; + u8 u8a[128]; /* whole address space for HDQ */ + char *end = buf; + + if (!hdq_priv.hdq_probed) + return -EINVAL; + + /* the dump does not take care about 16 bit regs, because at this + * bus level we don't know about the chip details + */ + for (n = 0; n < sizeof(u8a); n++) { + v = hdq_read(n); + if (v < 0) + goto bail; + u8a[n] = v; + } + + for (n = 0; n < sizeof(u8a); n += 16) { + hex_dump_to_buffer(u8a + n, sizeof(u8a), 16, 1, end, 4096, 0); + end += strlen(end); + *end++ = '\n'; + *end = '\0'; + } + return (end - buf); + +bail: + return sprintf(buf, "ERROR %d\n", v); +} + +/* you write by <address> <data>, eg, "34 128" */ + +#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0) + +static ssize_t hdq_sysfs_write(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + const char *end = buf + count; + int address = atoi(buf); + + if (!hdq_priv.hdq_probed) + return -EINVAL; + + while ((buf != end) && (*buf != ' ')) + buf++; + if (buf >= end) + return 0; + while ((buf < end) && (*buf == ' ')) + buf++; + if (buf >= end) + return 0; + + hdq_write(address, atoi(buf)); + + return count; +} + +static DEVICE_ATTR(dump, 0400, hdq_sysfs_dump, NULL); +static DEVICE_ATTR(write, 0600, NULL, hdq_sysfs_write); + +static struct attribute *hdq_sysfs_entries[] = { + &dev_attr_dump.attr, + &dev_attr_write.attr, + NULL +}; + +static struct attribute_group hdq_attr_group = { + .name = "hdq", + .attrs = hdq_sysfs_entries, +}; + + +#ifdef CONFIG_PM +static int hdq_suspend(struct platform_device *pdev, pm_message_t state) +{ + /* after 18s of this, the battery monitor will also go to sleep */ + hdq_priv.pdata->gpio_dir_in(); + hdq_priv.pdata->disable_fiq(); + return 0; +} + +static int hdq_resume(struct platform_device *pdev) +{ + hdq_priv.pdata->gpio_set(1); + hdq_priv.pdata->gpio_dir_out(); + hdq_priv.pdata->enable_fiq(); + return 0; +} +#endif + +static int __init hdq_probe(struct platform_device *pdev) +{ + int ret; + struct hdq_platform_data *pdata = pdev->dev.platform_data; + + if (!pdata) + return -EINVAL; + + platform_set_drvdata(pdev, NULL); + + mutex_init(&hdq_priv.hdq_lock); + + /* set our HDQ comms pin from the platform data */ + hdq_priv.pdata = pdata; + + hdq_priv.pdata->gpio_set(1); + hdq_priv.pdata->gpio_dir_out(); + + /* Initialize FIQ */ + if (hdq_priv.pdata->enable_fiq() < 0) { + dev_err(&pdev->dev, "Could not enable FIQ source\n"); + return -EINVAL; + } + + ret = sysfs_create_group(&pdev->dev.kobj, &hdq_attr_group); + if (ret) + return ret; + + hdq_priv.hdq_probed = 1; /* we are ready to do stuff now */ + + /* + * if wanted, users can defer registration of devices + * that depend on HDQ until after we register, and can use our + * device as parent so suspend-resume ordering is correct + */ + if (pdata->attach_child_devices) + (pdata->attach_child_devices)(&pdev->dev); + + hdq_priv.pdata = pdata; + + return 0; +} + +static int hdq_remove(struct platform_device *pdev) +{ + sysfs_remove_group(&pdev->dev.kobj, &hdq_attr_group); + return 0; +} + +static struct platform_driver hdq_driver = { + .probe = hdq_probe, + .remove = hdq_remove, +#ifdef CONFIG_PM + .suspend = hdq_suspend, + .resume = hdq_resume, +#endif + .driver = { + .name = "hdq", + }, +}; + +static int __init hdq_init(void) +{ + return platform_driver_register(&hdq_driver); +} + +static void __exit hdq_exit(void) +{ + platform_driver_unregister(&hdq_driver); +} + +module_init(hdq_init); +module_exit(hdq_exit); + +MODULE_AUTHOR("Andy Green <andy@openmoko.com>"); +MODULE_DESCRIPTION("HDQ driver"); diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index a9d6c5626a0..f7b80ae91d5 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -1263,6 +1263,13 @@ module_exit(s3c24xx_serial_modexit); #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE static struct uart_port *cons_uart; +static int cons_silenced; + +void s3c24xx_serial_console_set_silence(int silenced) +{ + cons_silenced = silenced; +} +EXPORT_SYMBOL(s3c24xx_serial_console_set_silence); static int s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon) @@ -1287,9 +1294,21 @@ static void s3c24xx_serial_console_putchar(struct uart_port *port, int ch) { unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON); + unsigned int umcon = rd_regl(cons_uart, S3C2410_UMCON); + + if (cons_silenced) + return; + + /* If auto HW flow control enabled, temporarily turn it off */ + if (umcon & S3C2410_UMCOM_AFC) + wr_regl(port, S3C2410_UMCON, (umcon & !S3C2410_UMCOM_AFC)); + while (!s3c24xx_serial_console_txrdy(port, ufcon)) barrier(); wr_regb(cons_uart, S3C2410_UTXH, ch); + + if (umcon & S3C2410_UMCOM_AFC) + wr_regl(port, S3C2410_UMCON, umcon); } static void diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index d5f4c1d45c9..e6b76d812c3 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -842,6 +842,7 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep) u32 ep_csr1; u32 idx; +handle_ep_again: if (likely (!list_empty(&ep->queue))) req = list_entry(ep->queue.next, struct s3c2410_request, queue); @@ -881,6 +882,8 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep) if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) { s3c2410_udc_read_fifo(ep,req); + if (s3c2410_udc_fifo_count_out()) + goto handle_ep_again; } } } diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index c025c84601b..fe463c3d1a4 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -107,6 +107,20 @@ config LCD_HP700 If you have an HP Jornada 700 series handheld (710/720/728) say Y to enable LCD control driver. +config LCD_JBT6K74 + tristate "TPO JBT6K74-AS TFT display ASIC control interface" + depends on SPI_MASTER && SYSFS && LCD_CLASS_DEVICE + help + SPI driver for the control interface of TFT panels containing + the TPO JBT6K74-AS controller ASIC, such as the TPO TD028TTEC1 + TFT diplay module used in the Openmoko Freerunner GSM phone. + + The control interface is required for display operation, as it + controls power management, display timing and gamma calibration. + + This driver can also be build as a module, if so it will be called + jbt6k74. + # # Backlight # @@ -282,3 +296,9 @@ config BACKLIGHT_88PM860X help Say Y to enable the backlight driver for Marvell 88PM8606. +config BACKLIGHT_PCF50633 + tristate "Backlight driver for NXP PCF50633 MFD" + depends on BACKLIGHT_CLASS_DEVICE && MFD_PCF50633 + help + If you have a backlight driven by a NXP PCF50633 MFD, say Y here to + enable its driver. diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 09d1f14d625..c9c049e9aeb 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o obj-$(CONFIG_LCD_TDO24M) += tdo24m.o obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o +obj-$(CONFIG_LCD_JBT6K74) += jbt6k74.o obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o @@ -31,4 +32,5 @@ obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o obj-$(CONFIG_BACKLIGHT_88PM860X) += 88pm860x_bl.o +obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o diff --git a/drivers/video/backlight/jbt6k74.c b/drivers/video/backlight/jbt6k74.c new file mode 100644 index 00000000000..8450904d585 --- /dev/null +++ b/drivers/video/backlight/jbt6k74.c @@ -0,0 +1,896 @@ +/* Linux kernel driver for the tpo JBT6K74-AS LCM ASIC + * + * Copyright (C) 2006-2007 by Openmoko, Inc. + * Author: Harald Welte <laforge@openmoko.org>, + * Stefan Schmidt <stefan@openmoko.org> + * Copyright (C) 2008 by Harald Welte <laforge@openmoko.org> + * Copyright (C) 2009 by Lars-Peter Clausen <lars@metafoo.de> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/workqueue.h> +#include <linux/jbt6k74.h> +#include <linux/fb.h> +#include <linux/lcd.h> +#include <linux/time.h> +#include <linux/regulator/consumer.h> +#include <linux/gpio.h> + +enum jbt_register { + JBT_REG_SLEEP_IN = 0x10, + JBT_REG_SLEEP_OUT = 0x11, + + JBT_REG_DISPLAY_OFF = 0x28, + JBT_REG_DISPLAY_ON = 0x29, + + JBT_REG_RGB_FORMAT = 0x3a, + JBT_REG_QUAD_RATE = 0x3b, + + JBT_REG_POWER_ON_OFF = 0xb0, + JBT_REG_BOOSTER_OP = 0xb1, + JBT_REG_BOOSTER_MODE = 0xb2, + JBT_REG_BOOSTER_FREQ = 0xb3, + JBT_REG_OPAMP_SYSCLK = 0xb4, + JBT_REG_VSC_VOLTAGE = 0xb5, + JBT_REG_VCOM_VOLTAGE = 0xb6, + JBT_REG_EXT_DISPL = 0xb7, + JBT_REG_OUTPUT_CONTROL = 0xb8, + JBT_REG_DCCLK_DCEV = 0xb9, + JBT_REG_DISPLAY_MODE1 = 0xba, + JBT_REG_DISPLAY_MODE2 = 0xbb, + JBT_REG_DISPLAY_MODE = 0xbc, + JBT_REG_ASW_SLEW = 0xbd, + JBT_REG_DUMMY_DISPLAY = 0xbe, + JBT_REG_DRIVE_SYSTEM = 0xbf, + + JBT_REG_SLEEP_OUT_FR_A = 0xc0, + JBT_REG_SLEEP_OUT_FR_B = 0xc1, + JBT_REG_SLEEP_OUT_FR_C = 0xc2, + JBT_REG_SLEEP_IN_LCCNT_D = 0xc3, + JBT_REG_SLEEP_IN_LCCNT_E = 0xc4, + JBT_REG_SLEEP_IN_LCCNT_F = 0xc5, + JBT_REG_SLEEP_IN_LCCNT_G = 0xc6, + + JBT_REG_GAMMA1_FINE_1 = 0xc7, + JBT_REG_GAMMA1_FINE_2 = 0xc8, + JBT_REG_GAMMA1_INCLINATION = 0xc9, + JBT_REG_GAMMA1_BLUE_OFFSET = 0xca, + + /* VGA */ + JBT_REG_BLANK_CONTROL = 0xcf, + JBT_REG_BLANK_TH_TV = 0xd0, + JBT_REG_CKV_ON_OFF = 0xd1, + JBT_REG_CKV_1_2 = 0xd2, + JBT_REG_OEV_TIMING = 0xd3, + JBT_REG_ASW_TIMING_1 = 0xd4, + JBT_REG_ASW_TIMING_2 = 0xd5, + + /* QVGA */ + JBT_REG_BLANK_CONTROL_QVGA = 0xd6, + JBT_REG_BLANK_TH_TV_QVGA = 0xd7, + JBT_REG_CKV_ON_OFF_QVGA = 0xd8, + JBT_REG_CKV_1_2_QVGA = 0xd9, + JBT_REG_OEV_TIMING_QVGA = 0xde, + JBT_REG_ASW_TIMING_1_QVGA = 0xdf, + JBT_REG_ASW_TIMING_2_QVGA = 0xe0, + + + JBT_REG_HCLOCK_VGA = 0xec, + JBT_REG_HCLOCK_QVGA = 0xed, +}; + +enum jbt_resolution { + JBT_RESOLUTION_VGA, + JBT_RESOLUTION_QVGA, +}; + +enum jbt_power_mode { + JBT_POWER_MODE_DEEP_STANDBY, + JBT_POWER_MODE_SLEEP, + JBT_POWER_MODE_NORMAL, +}; + +static const char *jbt_power_mode_names[] = { + [JBT_POWER_MODE_DEEP_STANDBY] = "deep-standby", + [JBT_POWER_MODE_SLEEP] = "sleep", + [JBT_POWER_MODE_NORMAL] = "normal", +}; + +static const char *jbt_resolution_names[] = { + [JBT_RESOLUTION_VGA] = "vga", + [JBT_RESOLUTION_QVGA] = "qvga", +}; + +struct jbt_info { + struct mutex lock; /* protects this structure */ + enum jbt_resolution resolution; + enum jbt_power_mode power_mode; + enum jbt_power_mode suspend_mode; + int suspended; + + struct spi_device *spi; + struct lcd_device *lcd_dev; + + unsigned long next_sleep; + struct delayed_work blank_work; + int blank_mode; + struct regulator_bulk_data supplies[2]; + uint16_t tx_buf[3]; + uint16_t reg_cache[0xEE]; +}; + +#define JBT_COMMAND 0x000 +#define JBT_DATA 0x100 + +static int jbt_reg_write_nodata(struct jbt_info *jbt, uint8_t reg) +{ + int ret; + + jbt->tx_buf[0] = JBT_COMMAND | reg; + ret = spi_write(jbt->spi, (uint8_t *)jbt->tx_buf, + sizeof(uint16_t)); + if (ret == 0) + jbt->reg_cache[reg] = 0; + else + dev_err(&jbt->spi->dev, "Write failed: %d\n", ret); + + return ret; +} + + +static int jbt_reg_write(struct jbt_info *jbt, uint8_t reg, uint8_t data) +{ + int ret; + + jbt->tx_buf[0] = JBT_COMMAND | reg; + jbt->tx_buf[1] = JBT_DATA | data; + ret = spi_write(jbt->spi, (uint8_t *)jbt->tx_buf, + 2*sizeof(uint16_t)); + if (ret == 0) + jbt->reg_cache[reg] = data; + else + dev_err(&jbt->spi->dev, "Write failed: %d\n", ret); + + return ret; +} + +static int jbt_reg_write16(struct jbt_info *jbt, uint8_t reg, uint16_t data) +{ + int ret; + + jbt->tx_buf[0] = JBT_COMMAND | reg; + jbt->tx_buf[1] = JBT_DATA | (data >> 8); + jbt->tx_buf[2] = JBT_DATA | (data & 0xff); + + ret = spi_write(jbt->spi, (uint8_t *)jbt->tx_buf, + 3*sizeof(uint16_t)); + if (ret == 0) + jbt->reg_cache[reg] = data; + else + dev_err(&jbt->spi->dev, "Write failed: %d\n", ret); + + return ret; +} + +static int jbt_init_regs(struct jbt_info *jbt) +{ + int ret; + + dev_dbg(&jbt->spi->dev, "entering %cVGA mode\n", + jbt->resolution == JBT_RESOLUTION_QVGA ? 'Q' : ' '); + + ret = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE1, 0x01); + ret |= jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE2, 0x00); + ret |= jbt_reg_write(jbt, JBT_REG_RGB_FORMAT, 0x60); + ret |= jbt_reg_write(jbt, JBT_REG_DRIVE_SYSTEM, 0x10); + ret |= jbt_reg_write(jbt, JBT_REG_BOOSTER_OP, 0x56); + ret |= jbt_reg_write(jbt, JBT_REG_BOOSTER_MODE, 0x33); + ret |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11); + ret |= jbt_reg_write(jbt, JBT_REG_OPAMP_SYSCLK, 0x02); + ret |= jbt_reg_write(jbt, JBT_REG_VSC_VOLTAGE, 0x2b); + ret |= jbt_reg_write(jbt, JBT_REG_VCOM_VOLTAGE, 0x40); + ret |= jbt_reg_write(jbt, JBT_REG_EXT_DISPL, 0x03); + ret |= jbt_reg_write(jbt, JBT_REG_DCCLK_DCEV, 0x04); + /* + * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement + * to avoid red / blue flicker + */ + ret |= jbt_reg_write(jbt, JBT_REG_ASW_SLEW, 0x00 | (1 << 5)); + ret |= jbt_reg_write(jbt, JBT_REG_DUMMY_DISPLAY, 0x00); + + ret |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_A, 0x11); + ret |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_B, 0x11); + ret |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_C, 0x11); + ret |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040); + ret |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0); + ret |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020); + ret |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0); + + ret |= jbt_reg_write16(jbt, JBT_REG_GAMMA1_FINE_1, 0x5533); + ret |= jbt_reg_write(jbt, JBT_REG_GAMMA1_FINE_2, 0x00); + ret |= jbt_reg_write(jbt, JBT_REG_GAMMA1_INCLINATION, 0x00); + ret |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00); + + if (jbt->resolution != JBT_RESOLUTION_QVGA) { + ret |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_VGA, 0x1f0); + ret |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL, 0x02); + ret |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804); + + ret |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF, 0x01); + ret |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2, 0x0000); + + ret |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING, 0x0d0e); + ret |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1, 0x11a4); + ret |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2, 0x0e); + } else { + ret |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff); + ret |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL_QVGA, 0x02); + ret |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV_QVGA, 0x0804); + + ret |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF_QVGA, 0x01); + ret |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2_QVGA, 0x0008); + + ret |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING_QVGA, 0x050a); + ret |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1_QVGA, 0x0a19); + ret |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2_QVGA, 0x0a); + } + + return ret ? -EIO : 0; +} + +static int jbt_standby_to_sleep(struct jbt_info *jbt) +{ + int ret; + struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data; + + gpio_set_value_cansleep(pdata->gpio_reset, 1); + ret = regulator_bulk_enable(ARRAY_SIZE(jbt->supplies), jbt->supplies); + + /* three times command zero */ + ret |= jbt_reg_write_nodata(jbt, 0x00); + mdelay(1); + ret |= jbt_reg_write_nodata(jbt, 0x00); + mdelay(1); + ret |= jbt_reg_write_nodata(jbt, 0x00); + mdelay(1); + + /* deep standby out */ + ret |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x11); + mdelay(1); + ret = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x28); + + /* (re)initialize register set */ + ret |= jbt_init_regs(jbt); + + return ret ? -EIO : 0; +} + +static int jbt_sleep_to_normal(struct jbt_info *jbt) +{ + int ret; + + /* Make sure we are 120 ms after SLEEP_OUT */ + if (time_before(jiffies, jbt->next_sleep)) + mdelay(jiffies_to_msecs(jbt->next_sleep - jiffies)); + + if (jbt->resolution == JBT_RESOLUTION_VGA) { + /* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */ + ret = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x80); + + /* Quad mode off */ + ret |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x00); + } else { + /* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */ + ret = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x81); + + /* Quad mode on */ + ret |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x22); + } + + /* AVDD on, XVDD on */ + ret |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16); + + /* Output control */ + ret |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xdff9); + + /* Turn on display */ + ret |= jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_ON); + + /* Sleep mode off */ + ret |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT); + jbt->next_sleep = jiffies + msecs_to_jiffies(120); + + /* Allow the booster and display controller to restart stably */ + mdelay(5); + + return ret ? -EIO : 0; +} + +static int jbt_normal_to_sleep(struct jbt_info *jbt) +{ + int ret; + + /* Make sure we are 120 ms after SLEEP_OUT */ + while (time_before(jiffies, jbt->next_sleep)) + cpu_relax(); + + ret = jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF); + ret |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0x8000 | 1 << 3); + ret |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_IN); + jbt->next_sleep = jiffies + msecs_to_jiffies(120); + + /* Allow the internal circuits to stop automatically */ + mdelay(5); + + return ret ? -EIO : 0; +} + +static int jbt_sleep_to_standby(struct jbt_info *jbt) +{ + int ret; + struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data; + + ret = jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x00); + + if (!ret) + ret = regulator_bulk_disable(ARRAY_SIZE(jbt->supplies), jbt->supplies); + + if (!ret) + gpio_set_value_cansleep(pdata->gpio_reset, 0); + + return ret; +} + +static int jbt6k74_enter_power_mode(struct jbt_info *jbt, + enum jbt_power_mode new_mode) +{ + struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data; + int ret = -EINVAL; + + dev_dbg(&jbt->spi->dev, "entering (old_state=%s, new_state=%s)\n", + jbt_power_mode_names[jbt->power_mode], + jbt_power_mode_names[new_mode]); + + mutex_lock(&jbt->lock); + + if (jbt->suspended) { + switch (new_mode) { + case JBT_POWER_MODE_DEEP_STANDBY: + case JBT_POWER_MODE_SLEEP: + case JBT_POWER_MODE_NORMAL: + ret = 0; + jbt->suspend_mode = new_mode; + break; + default: + break; + } + } else if (new_mode == JBT_POWER_MODE_NORMAL && + pdata->enable_pixel_clock) { + pdata->enable_pixel_clock(&jbt->spi->dev, 1); + } + + switch (jbt->power_mode) { + case JBT_POWER_MODE_DEEP_STANDBY: + switch (new_mode) { + case JBT_POWER_MODE_DEEP_STANDBY: + ret = 0; + break; + case JBT_POWER_MODE_SLEEP: + ret = jbt_standby_to_sleep(jbt); + break; + case JBT_POWER_MODE_NORMAL: + /* first transition into sleep */ + ret = jbt_standby_to_sleep(jbt); + /* then transition into normal */ + ret |= jbt_sleep_to_normal(jbt); + break; + } + break; + case JBT_POWER_MODE_SLEEP: + switch (new_mode) { + case JBT_POWER_MODE_SLEEP: + ret = 0; + break; + case JBT_POWER_MODE_DEEP_STANDBY: + ret = jbt_sleep_to_standby(jbt); + break; + case JBT_POWER_MODE_NORMAL: + ret = jbt_sleep_to_normal(jbt); + break; + } + break; + case JBT_POWER_MODE_NORMAL: + switch (new_mode) { + case JBT_POWER_MODE_NORMAL: + ret = 0; + break; + case JBT_POWER_MODE_DEEP_STANDBY: + /* first transition into sleep */ + ret = jbt_normal_to_sleep(jbt); + /* then transition into deep standby */ + ret |= jbt_sleep_to_standby(jbt); + break; + case JBT_POWER_MODE_SLEEP: + ret = jbt_normal_to_sleep(jbt); + break; + } + } + + if (ret == 0) { + jbt->power_mode = new_mode; + if (new_mode != JBT_POWER_MODE_NORMAL && + pdata->enable_pixel_clock) + pdata->enable_pixel_clock(&jbt->spi->dev, 0); + } else { + dev_err(&jbt->spi->dev, "Failed enter state '%s': %d\n", + jbt_power_mode_names[new_mode], ret); + } + + mutex_unlock(&jbt->lock); + + return ret; +} + +static int jbt6k74_set_resolution(struct jbt_info *jbt, + enum jbt_resolution new_resolution) +{ + int ret = 0; + enum jbt_resolution old_resolution; + + mutex_lock(&jbt->lock); + + if (jbt->resolution == new_resolution) + goto out_unlock; + + old_resolution = jbt->resolution; + jbt->resolution = new_resolution; + + if (jbt->power_mode == JBT_POWER_MODE_NORMAL) { + + /* first transition into sleep */ + ret = jbt_normal_to_sleep(jbt); + ret |= jbt_sleep_to_normal(jbt); + + if (ret) { + jbt->resolution = old_resolution; + dev_err(&jbt->spi->dev, "Failed to set resolution '%s')\n", + jbt_resolution_names[new_resolution]); + } + } + +out_unlock: + mutex_unlock(&jbt->lock); + + return ret; +} + +static ssize_t resolution_read(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct jbt_info *jbt = dev_get_drvdata(dev); + + if (jbt->resolution >= ARRAY_SIZE(jbt_resolution_names)) + return -EIO; + + return sprintf(buf, "%s\n", jbt_resolution_names[jbt->resolution]); +} + +static ssize_t resolution_write(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct jbt_info *jbt = dev_get_drvdata(dev); + int i, ret; + + for (i = 0; i < ARRAY_SIZE(jbt_resolution_names); i++) { + if (!strncmp(buf, jbt_resolution_names[i], + strlen(jbt_resolution_names[i]))) { + ret = jbt6k74_set_resolution(jbt, i); + if (ret) + return ret; + return count; + } + } + + return -EINVAL; +} + +static DEVICE_ATTR(resolution, 0644, resolution_read, resolution_write); + +static int reg_by_string(const char *name) +{ + if (!strcmp(name, "gamma_fine1")) + return JBT_REG_GAMMA1_FINE_1; + else if (!strcmp(name, "gamma_fine2")) + return JBT_REG_GAMMA1_FINE_2; + else if (!strcmp(name, "gamma_inclination")) + return JBT_REG_GAMMA1_INCLINATION; + else + return JBT_REG_GAMMA1_BLUE_OFFSET; +} + +static ssize_t gamma_read(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct jbt_info *jbt = dev_get_drvdata(dev); + int reg = reg_by_string(attr->attr.name); + uint16_t val; + + mutex_lock(&jbt->lock); + val = jbt->reg_cache[reg]; + mutex_unlock(&jbt->lock); + + return sprintf(buf, "0x%04x\n", val); +} + +static ssize_t gamma_write(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + struct jbt_info *jbt = dev_get_drvdata(dev); + int reg = reg_by_string(attr->attr.name); + unsigned long val; + + ret = strict_strtoul(buf, 10, &val); + if (ret) + return ret; + + mutex_lock(&jbt->lock); + jbt_reg_write(jbt, reg, val & 0xff); + mutex_unlock(&jbt->lock); + + return count; +} + +static ssize_t reset_write(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int ret; + struct jbt_info *jbt = dev_get_drvdata(dev); + struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data; + enum jbt_power_mode old_power_mode = jbt->power_mode; + + mutex_lock(&jbt->lock); + + if (gpio_is_valid(pdata->gpio_reset)) { + /* hard reset the jbt6k74 */ + gpio_set_value_cansleep(pdata->gpio_reset, 0); + mdelay(120); + gpio_set_value_cansleep(pdata->gpio_reset, 1); + mdelay(120); + } + + ret = jbt_reg_write_nodata(jbt, 0x01); + if (ret < 0) + dev_err(&jbt->spi->dev, "cannot soft reset\n"); + mdelay(120); + + mutex_unlock(&jbt->lock); + + jbt->power_mode = JBT_POWER_MODE_DEEP_STANDBY; + jbt6k74_enter_power_mode(jbt, old_power_mode); + + return count; +} + +static DEVICE_ATTR(gamma_fine1, 0644, gamma_read, gamma_write); +static DEVICE_ATTR(gamma_fine2, 0644, gamma_read, gamma_write); +static DEVICE_ATTR(gamma_inclination, 0644, gamma_read, gamma_write); +static DEVICE_ATTR(gamma_blue_offset, 0644, gamma_read, gamma_write); +static DEVICE_ATTR(reset, 0600, NULL, reset_write); + +static struct attribute *jbt_sysfs_entries[] = { + &dev_attr_resolution.attr, + &dev_attr_gamma_fine1.attr, + &dev_attr_gamma_fine2.attr, + &dev_attr_gamma_inclination.attr, + &dev_attr_gamma_blue_offset.attr, + &dev_attr_reset.attr, + NULL, +}; + +static struct attribute_group jbt_attr_group = { + .name = NULL, + .attrs = jbt_sysfs_entries, +}; + +/* FIXME: This in an ugly hack to delay display blanking. + When the jbt is in sleep mode it displays an all white screen and thus one + will a see a short flash. + By delaying the blanking we will give the backlight a chance to turn off and + thus avoid getting the flash */ +static void jbt_blank_worker(struct work_struct *work) +{ + struct jbt_info *jbt = container_of(work, struct jbt_info, + blank_work.work); + + switch (jbt->blank_mode) { + case FB_BLANK_NORMAL: + jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_SLEEP); + break; + case FB_BLANK_POWERDOWN: + jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_DEEP_STANDBY); + break; + default: + break; + } +} + +static int jbt6k74_set_mode(struct lcd_device *ld, struct fb_videomode *m) +{ + int ret = -EINVAL; + struct jbt_info *jbt = dev_get_drvdata(&ld->dev); + + if (m->xres == 240 && m->yres == 320) { + ret = jbt6k74_set_resolution(jbt, JBT_RESOLUTION_QVGA); + } else if (m->xres == 480 && m->yres == 640) { + ret = jbt6k74_set_resolution(jbt, JBT_RESOLUTION_VGA); + } else { + dev_err(&jbt->spi->dev, "Unknown resolution.\n"); + jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_SLEEP); + } + + return ret; +} + +static int jbt6k74_set_power(struct lcd_device *ld, int power) +{ + int ret = -EINVAL; + struct jbt_info *jbt = dev_get_drvdata(&ld->dev); + + jbt->blank_mode = power; + cancel_rearming_delayed_work(&jbt->blank_work); + + switch (power) { + case FB_BLANK_UNBLANK: + dev_dbg(&jbt->spi->dev, "unblank\n"); + mdelay(20); + ret = jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_NORMAL); + break; + case FB_BLANK_NORMAL: + dev_dbg(&jbt->spi->dev, "blank\n"); + ret = schedule_delayed_work(&jbt->blank_work, HZ); + break; + case FB_BLANK_POWERDOWN: + dev_dbg(&jbt->spi->dev, "powerdown\n"); + ret = schedule_delayed_work(&jbt->blank_work, HZ); + break; + default: + break; + } + + return ret; +} + +static int jbt6k74_get_power(struct lcd_device *ld) +{ + struct jbt_info *jbt = dev_get_drvdata(&ld->dev); + + switch (jbt->power_mode) { + case JBT_POWER_MODE_NORMAL: + return FB_BLANK_UNBLANK; + case JBT_POWER_MODE_SLEEP: + return FB_BLANK_NORMAL; + default: + return JBT_POWER_MODE_DEEP_STANDBY; + } +} + +struct lcd_ops jbt6k74_lcd_ops = { + .set_power = jbt6k74_set_power, + .get_power = jbt6k74_get_power, + .set_mode = jbt6k74_set_mode, +}; + +/* linux device model infrastructure */ + +static int __devinit jbt_probe(struct spi_device *spi) +{ + int ret; + struct jbt_info *jbt; + struct jbt6k74_platform_data *pdata = spi->dev.platform_data; + + /* the controller doesn't have a MISO pin; we can't do detection */ + + spi->mode = SPI_CPOL | SPI_CPHA; + spi->bits_per_word = 9; + + ret = spi_setup(spi); + if (ret < 0) { + dev_err(&spi->dev, + "Failed to setup spi\n"); + return ret; + } + + jbt = kzalloc(sizeof(*jbt), GFP_KERNEL); + if (!jbt) + return -ENOMEM; + + jbt->spi = spi; + + jbt->lcd_dev = lcd_device_register("jbt6k74-lcd", &spi->dev, jbt, + &jbt6k74_lcd_ops); + + if (IS_ERR(jbt->lcd_dev)) { + ret = PTR_ERR(jbt->lcd_dev); + goto err_free_drvdata; + } + + INIT_DELAYED_WORK(&jbt->blank_work, jbt_blank_worker); + + jbt->resolution = JBT_RESOLUTION_VGA; + jbt->power_mode = JBT_POWER_MODE_DEEP_STANDBY; + jbt->next_sleep = jiffies + msecs_to_jiffies(120); + mutex_init(&jbt->lock); + + dev_set_drvdata(&spi->dev, jbt); + + jbt->supplies[0].supply = "VDC"; + jbt->supplies[1].supply = "VDDIO"; + + ret = regulator_bulk_get(&spi->dev, ARRAY_SIZE(jbt->supplies), + jbt->supplies); + if (ret) { + dev_err(&spi->dev, "Failed to power get supplies: %d\n", ret); + goto err_unregister_lcd; + } + + if (gpio_is_valid(pdata->gpio_reset)) { + ret = gpio_request(pdata->gpio_reset, "jbt6k74 reset"); + if (ret) { + dev_err(&spi->dev, "Failed to request reset gpio: %d\n", + ret); + goto err_free_supplies; + } + + ret = gpio_direction_output(pdata->gpio_reset, 1); + if (ret) { + dev_err(&spi->dev, "Failed to set reset gpio direction: %d\n", + ret); + goto err_gpio_free; + } + } + + ret = sysfs_create_group(&spi->dev.kobj, &jbt_attr_group); + if (ret < 0) { + dev_err(&spi->dev, "cannot create sysfs group\n"); + goto err_gpio_free; + } + + mdelay(50); + ret = jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_NORMAL); + if (ret < 0) { + dev_err(&spi->dev, "cannot enter NORMAL state\n"); + goto err_sysfs_remove; + } + + + if (pdata->probe_completed) + (pdata->probe_completed)(&spi->dev); + + return 0; + +err_sysfs_remove: + sysfs_remove_group(&spi->dev.kobj, &jbt_attr_group); +err_gpio_free: + gpio_free(pdata->gpio_reset); +err_free_supplies: + regulator_bulk_free(ARRAY_SIZE(jbt->supplies), jbt->supplies); +err_unregister_lcd: + lcd_device_unregister(jbt->lcd_dev); +err_free_drvdata: + dev_set_drvdata(&spi->dev, NULL); + kfree(jbt); + + return ret; +} + +static int __devexit jbt_remove(struct spi_device *spi) +{ + struct jbt_info *jbt = dev_get_drvdata(&spi->dev); + struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data; + + /* We don't want to switch off the display in case the user + * accidentially unloads the module (whose use count normally is 0) */ + jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_NORMAL); + + sysfs_remove_group(&spi->dev.kobj, &jbt_attr_group); + + if (gpio_is_valid(pdata->gpio_reset)) + gpio_free(pdata->gpio_reset); + + lcd_device_unregister(jbt->lcd_dev); + + dev_set_drvdata(&spi->dev, NULL); + + regulator_bulk_free(ARRAY_SIZE(jbt->supplies), jbt->supplies); + kfree(jbt); + + return 0; +} + +#ifdef CONFIG_PM +static int jbt_suspend(struct spi_device *spi, pm_message_t state) +{ + struct jbt_info *jbt = dev_get_drvdata(&spi->dev); + + jbt->suspend_mode = jbt->power_mode; + + jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_DEEP_STANDBY); + jbt->suspended = 1; + + dev_info(&spi->dev, "suspended\n"); + + return 0; +} + +int jbt6k74_resume(struct spi_device *spi) +{ + struct jbt_info *jbt = dev_get_drvdata(&spi->dev); + dev_info(&spi->dev, "starting resume: %d\n", jbt->suspend_mode); + + mdelay(20); + + jbt->suspended = 0; + jbt6k74_enter_power_mode(jbt, jbt->suspend_mode); + + dev_info(&spi->dev, "resumed: %d\n", jbt->suspend_mode); + + return 0; +} +EXPORT_SYMBOL_GPL(jbt6k74_resume); + +#else +#define jbt_suspend NULL +#define jbt6k74_resume NULL +#endif + +static struct spi_driver jbt6k74_driver = { + .driver = { + .name = "jbt6k74", + .owner = THIS_MODULE, + }, + + .probe = jbt_probe, + .remove = __devexit_p(jbt_remove), + .suspend = jbt_suspend, + .resume = jbt6k74_resume, +}; + +static int __init jbt_init(void) +{ + return spi_register_driver(&jbt6k74_driver); +} +module_init(jbt_init); + +static void __exit jbt_exit(void) +{ + spi_unregister_driver(&jbt6k74_driver); +} +module_exit(jbt_exit); + +MODULE_DESCRIPTION("SPI driver for tpo JBT6K74-AS LCM control interface"); +MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/backlight/pcf50633-backlight.c b/drivers/video/backlight/pcf50633-backlight.c new file mode 100644 index 00000000000..5b72089c9c3 --- /dev/null +++ b/drivers/video/backlight/pcf50633-backlight.c @@ -0,0 +1,189 @@ +/* + * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de> + * PCF50633 backlight device driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/platform_device.h> + +#include <linux/backlight.h> +#include <linux/fb.h> + +#include <linux/mfd/pcf50633/core.h> +#include <linux/mfd/pcf50633/backlight.h> + +struct pcf50633_bl { + struct pcf50633 *pcf; + struct backlight_device *bl; + + unsigned int brightness; + unsigned int brightness_limit; +}; + +/* + * pcf50633_bl_set_brightness_limit + * + * Update the brightness limit for the pc50633 backlight. The actuall brightness + * will not go above the limit. This is useful to limit power drain for example + * on low battery. + * + * @dev: Pointer to a pcf50633 device + * @limit: The brightness limit. Valid values are 0-63 + */ +int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit) +{ + struct pcf50633_bl *pcf_bl = platform_get_drvdata(pcf->bl_pdev); + + if (!pcf_bl) + return -ENODEV; + + pcf_bl->brightness_limit = limit & 0x3f; + backlight_update_status(pcf_bl->bl); + + return 0; +} + +static int pcf50633_bl_update_status(struct backlight_device *bl) +{ + struct pcf50633_bl *pcf_bl = bl_get_data(bl); + unsigned int new_brightness; + + + if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK) || + bl->props.power != FB_BLANK_UNBLANK) + new_brightness = 0; + else if (bl->props.brightness < pcf_bl->brightness_limit) + new_brightness = bl->props.brightness; + else + new_brightness = pcf_bl->brightness_limit; + + + if (pcf_bl->brightness == new_brightness) + return 0; + + if (new_brightness) { + pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDOUT, + new_brightness); + if (!pcf_bl->brightness) + pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 1); + } else { + pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 0); + } + + pcf_bl->brightness = new_brightness; + + return 0; +} + +static int pcf50633_bl_get_brightness(struct backlight_device *bl) +{ + struct pcf50633_bl *pcf_bl = bl_get_data(bl); + return pcf_bl->brightness; +} + +static struct backlight_ops pcf50633_bl_ops = { + .get_brightness = pcf50633_bl_get_brightness, + .update_status = pcf50633_bl_update_status, + .options = BL_CORE_SUSPENDRESUME, +}; + +static int __devinit pcf50633_bl_probe(struct platform_device *pdev) +{ + int ret; + struct pcf50633_bl *pcf_bl; + struct pcf50633_platform_data *pcf50633_data = pdev->dev.parent->platform_data; + struct pcf50633_bl_platform_data *pdata = pcf50633_data->backlight_data; + struct backlight_properties bl_props; + + pcf_bl = kzalloc(sizeof(*pcf_bl), GFP_KERNEL); + if (!pcf_bl) + return -ENOMEM; + + bl_props.max_brightness = 0x3f; + bl_props.power = FB_BLANK_UNBLANK; + + if (pdata) { + bl_props.brightness = pdata->default_brightness; + pcf_bl->brightness_limit = pdata->default_brightness_limit; + } else { + bl_props.brightness = 0x3f; + pcf_bl->brightness_limit = 0x3f; + } + + pcf_bl->pcf = dev_to_pcf50633(pdev->dev.parent); + + pcf_bl->bl = backlight_device_register(pdev->name, &pdev->dev, pcf_bl, + &pcf50633_bl_ops, &bl_props); + + if (IS_ERR(pcf_bl->bl)) { + ret = PTR_ERR(pcf_bl->bl); + goto err_free; + } + + platform_set_drvdata(pdev, pcf_bl); + + pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDDIM, pdata->ramp_time); + + /* Should be different from bl_props.brightness, so we don't + * update_status early the first time it's called */ + pcf_bl->brightness = pcf_bl->bl->props.brightness + 1; + + backlight_update_status(pcf_bl->bl); + + return 0; + +err_free: + kfree(pcf_bl); + + return ret; +} + +static int __devexit pcf50633_bl_remove(struct platform_device *pdev) +{ + struct pcf50633_bl *pcf_bl = platform_get_drvdata(pdev); + + backlight_device_unregister(pcf_bl->bl); + + platform_set_drvdata(pdev, NULL); + + kfree(pcf_bl); + + return 0; +} + +static struct platform_driver pcf50633_bl_driver = { + .probe = pcf50633_bl_probe, + .remove = __devexit_p(pcf50633_bl_remove), + .driver = { + .name = "pcf50633-backlight", + }, +}; + +static int __init pcf50633_bl_init(void) +{ + return platform_driver_register(&pcf50633_bl_driver); +} +module_init(pcf50633_bl_init); + +static void __exit pcf50633_bl_exit(void) +{ + platform_driver_unregister(&pcf50633_bl_driver); +} +module_exit(pcf50633_bl_exit); + +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("PCF50633 backlight driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:pcf50633-backlight"); |