diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/media/dvb/frontends/tda1004x.c | 86 | ||||
-rw-r--r-- | drivers/media/dvb/frontends/tda1004x.h | 49 | ||||
-rw-r--r-- | drivers/media/video/saa7134/saa7134-dvb.c | 48 |
3 files changed, 112 insertions, 71 deletions
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c index f4a9cf9d26d..c47501ae8b0 100644 --- a/drivers/media/dvb/frontends/tda1004x.c +++ b/drivers/media/dvb/frontends/tda1004x.c @@ -40,20 +40,6 @@ #include "dvb_frontend.h" #include "tda1004x.h" -enum tda1004x_demod { - TDA1004X_DEMOD_TDA10045, - TDA1004X_DEMOD_TDA10046, -}; - -struct tda1004x_state { - struct i2c_adapter* i2c; - const struct tda1004x_config* config; - struct dvb_frontend frontend; - - /* private demod data */ - enum tda1004x_demod demod_type; -}; - static int debug; #define dprintk(args...) \ do { \ @@ -507,8 +493,13 @@ static int tda10046_fwupload(struct dvb_frontend* fe) tda1004x_write_byteI(state, TDA1004X_CONFC4, 0x80); } tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0); + /* set GPIO 1 and 3 */ + if (state->config->gpio_config != TDA10046_GPTRI) { + tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE2, 0x33); + tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f, state->config->gpio_config &0x0f); + } /* let the clocks recover from sleep */ - msleep(5); + msleep(10); /* The PLLs need to be reprogrammed after sleep */ tda10046_init_plls(fe); @@ -517,25 +508,29 @@ static int tda10046_fwupload(struct dvb_frontend* fe) if (tda1004x_check_upload_ok(state) == 0) return 0; - if (state->config->request_firmware != NULL) { - /* request the firmware, this will block until someone uploads it */ - printk(KERN_INFO "tda1004x: waiting for firmware upload...\n"); - ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE); + printk(KERN_INFO "tda1004x: trying to boot from eeprom\n"); + tda1004x_write_mask(state, TDA1004X_CONFC4, 4, 4); + msleep(300); + /* don't re-upload unless necessary */ + if (tda1004x_check_upload_ok(state) == 0) + return 0; + + /* request the firmware, this will block until someone uploads it */ + printk(KERN_INFO "tda1004x: waiting for firmware upload...\n"); + ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE); + if (ret) { + /* remain compatible to old bug: try to load with tda10045 image name */ + ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE); if (ret) { printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n"); return ret; - } - tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST - ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN); - release_firmware(fw); - if (ret) - return ret; - } else { - /* boot from firmware eeprom */ - printk(KERN_INFO "tda1004x: booting from eeprom\n"); - tda1004x_write_mask(state, TDA1004X_CONFC4, 4, 4); - msleep(300); + } else + printk(KERN_INFO "tda1004x: please rename the firmware file to %s\n", + TDA10046_DEFAULT_FIRMWARE); } + tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST + ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN); + release_firmware(fw); return tda1004x_check_upload_ok(state); } @@ -638,37 +633,25 @@ static int tda10046_init(struct dvb_frontend* fe) switch (state->config->agc_config) { case TDA10046_AGC_DEFAULT: tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x00); // AGC setup - tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities + tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60); // set AGC polarities break; case TDA10046_AGC_IFO_AUTO_NEG: tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup - tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities + tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60); // set AGC polarities break; case TDA10046_AGC_IFO_AUTO_POS: tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup - tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x00); // set AGC polarities + tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x00); // set AGC polarities break; - case TDA10046_AGC_TDA827X_GP11: + case TDA10046_AGC_TDA827X: tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize - tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x6a); // set AGC polarities - break; - case TDA10046_AGC_TDA827X_GP00: - tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup - tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold - tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize - tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities - break; - case TDA10046_AGC_TDA827X_GP01: - tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup - tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold - tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize - tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x62); // set AGC polarities + tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0xf0, 0x60); // set AGC polarities break; } tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38); - tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x61); // Turn both AGC outputs on + tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x79); // Turn IF AGC output on tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MIN, 0); // } tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MAX, 0xff); // } AGC min/max values tda1004x_write_byteI(state, TDA10046H_AGC_IF_MIN, 0); // } @@ -1165,6 +1148,7 @@ static int tda1004x_read_ber(struct dvb_frontend* fe, u32* ber) static int tda1004x_sleep(struct dvb_frontend* fe) { struct tda1004x_state* state = fe->demodulator_priv; + int gpio_conf; switch (state->demod_type) { case TDA1004X_DEMOD_TDA10045: @@ -1174,6 +1158,12 @@ static int tda1004x_sleep(struct dvb_frontend* fe) case TDA1004X_DEMOD_TDA10046: /* set outputs to tristate */ tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0xff); + /* invert GPIO 1 and 3 if desired*/ + gpio_conf = state->config->gpio_config; + if (gpio_conf >= TDA10046_GP00_I) + tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x0f, + (gpio_conf & 0x0f) ^ 0x0a); + tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1); break; } diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h index ec502d71b83..886db3f75d5 100644 --- a/drivers/media/dvb/frontends/tda1004x.h +++ b/drivers/media/dvb/frontends/tda1004x.h @@ -35,9 +35,23 @@ enum tda10046_agc { TDA10046_AGC_DEFAULT, /* original configuration */ TDA10046_AGC_IFO_AUTO_NEG, /* IF AGC only, automatic, negtive */ TDA10046_AGC_IFO_AUTO_POS, /* IF AGC only, automatic, positive */ - TDA10046_AGC_TDA827X_GP11, /* IF AGC only, special setup for tda827x */ - TDA10046_AGC_TDA827X_GP00, /* same as above, but GPIOs 0 */ - TDA10046_AGC_TDA827X_GP01, /* same as above, but GPIO3=0 GPIO1=1*/ + TDA10046_AGC_TDA827X, /* IF AGC only, special setup for tda827x */ +}; + +/* Many (hybrid) boards use GPIO 1 and 3 + GPIO1 analog - dvb switch + GPIO3 firmware eeprom address switch +*/ +enum tda10046_gpio { + TDA10046_GPTRI = 0x00, /* All GPIOs tristate */ + TDA10046_GP00 = 0x40, /* GPIO3=0, GPIO1=0 */ + TDA10046_GP01 = 0x42, /* GPIO3=0, GPIO1=1 */ + TDA10046_GP10 = 0x48, /* GPIO3=1, GPIO1=0 */ + TDA10046_GP11 = 0x4a, /* GPIO3=1, GPIO1=1 */ + TDA10046_GP00_I = 0x80, /* GPIO3=0, GPIO1=0, invert in sleep mode*/ + TDA10046_GP01_I = 0x82, /* GPIO3=0, GPIO1=1, invert in sleep mode */ + TDA10046_GP10_I = 0x88, /* GPIO3=1, GPIO1=0, invert in sleep mode */ + TDA10046_GP11_I = 0x8a, /* GPIO3=1, GPIO1=1, invert in sleep mode */ }; enum tda10046_if { @@ -67,11 +81,38 @@ struct tda1004x_config /* AGC configuration */ enum tda10046_agc agc_config; + /* setting of GPIO1 and 3 */ + enum tda10046_gpio gpio_config; + + /* slave address and configuration of the tuner */ + u8 tuner_address; + u8 tuner_config; + u8 antenna_switch; + + /* if the board uses another I2c Bridge (tda8290), its address */ + u8 i2c_gate; + /* request firmware for device */ - /* set this to NULL if the card has a firmware EEPROM */ int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); }; +enum tda1004x_demod { + TDA1004X_DEMOD_TDA10045, + TDA1004X_DEMOD_TDA10046, +}; + +struct tda1004x_state { + struct i2c_adapter* i2c; + const struct tda1004x_config* config; + struct dvb_frontend frontend; + + /* this allows to store probed board information */ + int conf_probed; + + /* private demod data */ + enum tda1004x_demod demod_type; +}; + #if defined(CONFIG_DVB_TDA1004X) || (defined(CONFIG_DVB_TDA1004X_MODULE) && defined(MODULE)) extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c); diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index e3059fd3395..6d148a7601a 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -416,7 +416,7 @@ static struct tda1004x_config philips_europa_config = { .xtal_freq = TDA10046_XTAL_4M, .agc_config = TDA10046_AGC_IFO_AUTO_POS, .if_freq = TDA10046_FREQ_052, - .request_firmware = NULL, + .request_firmware = philips_tda1004x_request_firmware, }; /* ------------------------------------------------------------------ */ @@ -548,7 +548,7 @@ static struct tda1004x_config medion_cardbus = { .xtal_freq = TDA10046_XTAL_16M, .agc_config = TDA10046_AGC_IFO_AUTO_NEG, .if_freq = TDA10046_FREQ_3613, - .request_firmware = NULL, + .request_firmware = philips_tda1004x_request_firmware, }; /* ------------------------------------------------------------------ */ @@ -681,9 +681,10 @@ static struct tda1004x_config tda827x_lifeview_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X_GP11, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, .if_freq = TDA10046_FREQ_045, - .request_firmware = NULL, + .request_firmware = philips_tda1004x_request_firmware, }; /* ------------------------------------------------------------------ */ @@ -885,9 +886,10 @@ static struct tda1004x_config philips_tiger_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X_GP11, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, .if_freq = TDA10046_FREQ_045, - .request_firmware = NULL, + .request_firmware = philips_tda1004x_request_firmware, }; /* ------------------------------------------------------------------ */ @@ -918,9 +920,10 @@ static struct tda1004x_config cinergy_ht_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X_GP01, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP01_I, .if_freq = TDA10046_FREQ_045, - .request_firmware = NULL, + .request_firmware = philips_tda1004x_request_firmware, }; /* ------------------------------------------------------------------ */ @@ -930,7 +933,8 @@ static struct tda1004x_config pinnacle_pctv_310i_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X_GP11, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, .if_freq = TDA10046_FREQ_045, .request_firmware = philips_tda1004x_request_firmware, }; @@ -942,7 +946,8 @@ static struct tda1004x_config hauppauge_hvr_1110_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X_GP11, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, .if_freq = TDA10046_FREQ_045, .request_firmware = philips_tda1004x_request_firmware, }; @@ -954,7 +959,8 @@ static struct tda1004x_config asus_p7131_dual_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X_GP11, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, .if_freq = TDA10046_FREQ_045, .request_firmware = philips_tda1004x_request_firmware, }; @@ -1006,9 +1012,10 @@ static struct tda1004x_config lifeview_trio_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X_GP00, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP00_I, .if_freq = TDA10046_FREQ_045, - .request_firmware = NULL, + .request_firmware = philips_tda1004x_request_firmware, }; /* ------------------------------------------------------------------ */ @@ -1043,9 +1050,10 @@ static struct tda1004x_config ads_tech_duo_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X_GP00, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP00_I, .if_freq = TDA10046_FREQ_045, - .request_firmware = NULL, + .request_firmware = philips_tda1004x_request_firmware, }; /* ------------------------------------------------------------------ */ @@ -1068,9 +1076,10 @@ static struct tda1004x_config tevion_dvbt220rf_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X_GP11, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, .if_freq = TDA10046_FREQ_045, - .request_firmware = NULL, + .request_firmware = philips_tda1004x_request_firmware, }; /* ------------------------------------------------------------------ */ @@ -1113,9 +1122,10 @@ static struct tda1004x_config md8800_dvbt_config = { .invert = 1, .invert_oclk = 0, .xtal_freq = TDA10046_XTAL_16M, - .agc_config = TDA10046_AGC_TDA827X_GP11, + .agc_config = TDA10046_AGC_TDA827X, + .gpio_config = TDA10046_GP11_I, .if_freq = TDA10046_FREQ_045, - .request_firmware = NULL, + .request_firmware = philips_tda1004x_request_firmware, }; static struct tda10086_config flydvbs = { |