diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/wireless/mwl8k.c | 154 |
1 files changed, 89 insertions, 65 deletions
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 7bbdca41831..93b92680d07 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -139,13 +139,18 @@ struct mwl8k_priv { struct pci_dev *pdev; u8 name[16]; - /* firmware access lock */ - spinlock_t fw_lock; /* firmware files and meta data */ struct mwl8k_firmware fw; u32 part_num; + /* firmware access */ + struct mutex fw_mutex; + struct task_struct *fw_mutex_owner; + int fw_mutex_depth; + struct completion *tx_wait; + struct completion *hostcmd_wait; + /* lock held over TX and TX reap */ spinlock_t tx_lock; @@ -179,9 +184,6 @@ struct mwl8k_priv { bool radio_short_preamble; bool wmm_enabled; - /* Set if PHY config is in progress */ - bool inconfig; - /* XXX need to convert this to handle multiple interfaces */ bool capture_beacon; u8 capture_bssid[ETH_ALEN]; @@ -200,8 +202,6 @@ struct mwl8k_priv { /* Work thread to serialize configuration requests */ struct workqueue_struct *config_wq; - struct completion *hostcmd_wait; - struct completion *tx_wait; }; /* Per interface specific private data */ @@ -1113,6 +1113,9 @@ static int mwl8k_scan_tx_ring(struct mwl8k_priv *priv, return ndescs; } +/* + * Must be called with hw->fw_mutex held and tx queues stopped. + */ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw) { struct mwl8k_priv *priv = hw->priv; @@ -1122,9 +1125,6 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw) might_sleep(); - if (priv->tx_wait != NULL) - printk(KERN_ERR "WARNING Previous TXWaitEmpty instance\n"); - spin_lock_bh(&priv->tx_lock); count = mwl8k_txq_busy(priv); if (count) { @@ -1140,7 +1140,7 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw) int newcount; timeout = wait_for_completion_timeout(&cmd_wait, - msecs_to_jiffies(1000)); + msecs_to_jiffies(5000)); if (timeout) return 0; @@ -1149,7 +1149,7 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw) newcount = mwl8k_txq_busy(priv); spin_unlock_bh(&priv->tx_lock); - printk(KERN_ERR "%s(%u) TIMEDOUT:1000ms Pend:%u-->%u\n", + printk(KERN_ERR "%s(%u) TIMEDOUT:5000ms Pend:%u-->%u\n", __func__, __LINE__, count, newcount); mwl8k_scan_tx_ring(priv, txinfo); @@ -1228,10 +1228,10 @@ static void mwl8k_txq_reclaim(struct ieee80211_hw *hw, int index, int force) ieee80211_tx_status_irqsafe(hw, skb); - wake = !priv->inconfig && priv->radio_on; + wake = 1; } - if (wake) + if (wake && priv->radio_on && !mutex_is_locked(&priv->fw_mutex)) ieee80211_wake_queue(hw, index); } @@ -1360,6 +1360,60 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb) /* + * Firmware access. + * + * We have the following requirements for issuing firmware commands: + * - Some commands require that the packet transmit path is idle when + * the command is issued. (For simplicity, we'll just quiesce the + * transmit path for every command.) + * - There are certain sequences of commands that need to be issued to + * the hardware sequentially, with no other intervening commands. + * + * This leads to an implementation of a "firmware lock" as a mutex that + * can be taken recursively, and which is taken by both the low-level + * command submission function (mwl8k_post_cmd) as well as any users of + * that function that require issuing of an atomic sequence of commands, + * and quiesces the transmit path whenever it's taken. + */ +static int mwl8k_fw_lock(struct ieee80211_hw *hw) +{ + struct mwl8k_priv *priv = hw->priv; + + if (priv->fw_mutex_owner != current) { + int rc; + + mutex_lock(&priv->fw_mutex); + ieee80211_stop_queues(hw); + + rc = mwl8k_tx_wait_empty(hw); + if (rc) { + ieee80211_wake_queues(hw); + mutex_unlock(&priv->fw_mutex); + + return rc; + } + + priv->fw_mutex_owner = current; + } + + priv->fw_mutex_depth++; + + return 0; +} + +static void mwl8k_fw_unlock(struct ieee80211_hw *hw) +{ + struct mwl8k_priv *priv = hw->priv; + + if (!--priv->fw_mutex_depth) { + ieee80211_wake_queues(hw); + priv->fw_mutex_owner = NULL; + mutex_unlock(&priv->fw_mutex); + } +} + + +/* * Command processing. */ @@ -1384,28 +1438,28 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd) if (pci_dma_mapping_error(priv->pdev, dma_addr)) return -ENOMEM; - if (priv->hostcmd_wait != NULL) - printk(KERN_ERR "WARNING host command in progress\n"); + rc = mwl8k_fw_lock(hw); + if (rc) + return rc; - spin_lock_irq(&priv->fw_lock); priv->hostcmd_wait = &cmd_wait; iowrite32(dma_addr, regs + MWL8K_HIU_GEN_PTR); iowrite32(MWL8K_H2A_INT_DOORBELL, regs + MWL8K_HIU_H2A_INTERRUPT_EVENTS); iowrite32(MWL8K_H2A_INT_DUMMY, regs + MWL8K_HIU_H2A_INTERRUPT_EVENTS); - spin_unlock_irq(&priv->fw_lock); timeout = wait_for_completion_timeout(&cmd_wait, msecs_to_jiffies(MWL8K_CMD_TIMEOUT_MS)); + priv->hostcmd_wait = NULL; + + mwl8k_fw_unlock(hw); + pci_unmap_single(priv->pdev, dma_addr, dma_size, PCI_DMA_BIDIRECTIONAL); if (!timeout) { - spin_lock_irq(&priv->fw_lock); - priv->hostcmd_wait = NULL; - spin_unlock_irq(&priv->fw_lock); printk(KERN_ERR "%s: Command %s timeout after %u ms\n", priv->name, mwl8k_cmd_name(cmd->code, buf, sizeof(buf)), @@ -2336,17 +2390,14 @@ static irqreturn_t mwl8k_interrupt(int irq, void *dev_id) } if (status & MWL8K_A2H_INT_OPC_DONE) { - if (priv->hostcmd_wait != NULL) { + if (priv->hostcmd_wait != NULL) complete(priv->hostcmd_wait); - priv->hostcmd_wait = NULL; - } } if (status & MWL8K_A2H_INT_QUEUE_EMPTY) { - if (!priv->inconfig && - priv->radio_on && - mwl8k_txq_busy(priv)) - mwl8k_tx_start(priv); + if (!mutex_is_locked(&priv->fw_mutex) && + priv->radio_on && mwl8k_txq_busy(priv)) + mwl8k_tx_start(priv); } return IRQ_HANDLED; @@ -2395,41 +2446,13 @@ static void mwl8k_config_thread(struct work_struct *wt) { struct mwl8k_work_struct *worker = (struct mwl8k_work_struct *)wt; struct ieee80211_hw *hw = worker->hw; - struct mwl8k_priv *priv = hw->priv; int rc = 0; - int iter; - spin_lock_irq(&priv->tx_lock); - priv->inconfig = true; - spin_unlock_irq(&priv->tx_lock); - - ieee80211_stop_queues(hw); - - /* - * Wait for host queues to drain before doing PHY - * reconfiguration. This avoids interrupting any in-flight - * DMA transfers to the hardware. - */ - iter = 4; - do { - rc = mwl8k_tx_wait_empty(hw); - if (rc) - printk(KERN_ERR "%s() txwait timeout=1000ms " - "Retry:%u/%u\n", __func__, 4 - iter + 1, 4); - } while (rc && --iter); - - rc = iter ? 0 : -ETIMEDOUT; - - if (!rc) + rc = mwl8k_fw_lock(hw); + if (!rc) { rc = worker->wfunc(wt); - - spin_lock_irq(&priv->tx_lock); - priv->inconfig = false; - if (priv->pending_tx_pkts && priv->radio_on) - mwl8k_tx_start(priv); - spin_unlock_irq(&priv->tx_lock); - - ieee80211_wake_queues(hw); + mwl8k_fw_unlock(hw); + } worker->rc = rc; complete(worker->cmd_wait); @@ -3145,15 +3168,10 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, priv = hw->priv; priv->hw = hw; priv->pdev = pdev; - priv->hostcmd_wait = NULL; - priv->tx_wait = NULL; - priv->inconfig = false; priv->wmm_enabled = false; priv->pending_tx_pkts = 0; strncpy(priv->name, MWL8K_NAME, sizeof(priv->name)); - spin_lock_init(&priv->fw_lock); - SET_IEEE80211_DEV(hw, &pdev->dev); pci_set_drvdata(pdev, hw); @@ -3219,6 +3237,12 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, goto err_iounmap; rxq_refill(hw, 0, INT_MAX); + mutex_init(&priv->fw_mutex); + priv->fw_mutex_owner = NULL; + priv->fw_mutex_depth = 0; + priv->tx_wait = NULL; + priv->hostcmd_wait = NULL; + spin_lock_init(&priv->tx_lock); for (i = 0; i < MWL8K_TX_QUEUES; i++) { |