aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/Kconfig15
-rw-r--r--drivers/net/Makefile1
-rw-r--r--drivers/net/Space.c4
-rw-r--r--drivers/net/sk_mca.c1216
-rw-r--r--drivers/net/sk_mca.h170
5 files changed, 0 insertions, 1406 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 10ac82f3612..b199456a736 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1155,21 +1155,6 @@ config SEEQ8005
<file:Documentation/networking/net-modules.txt>. The module
will be called seeq8005.
-config SKMC
- tristate "SKnet MCA support"
- depends on NET_ETHERNET && MCA && BROKEN
- ---help---
- These are Micro Channel Ethernet adapters. You need to say Y to "MCA
- support" in order to use this driver. Supported cards are the SKnet
- Junior MC2 and the SKnet MC2(+). The driver automatically
- distinguishes between the two cards. Note that using multiple boards
- of different type hasn't been tested with this driver. Say Y if you
- have one of these Ethernet adapters.
-
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
- will be called sk_mca.
-
config NE2_MCA
tristate "NE/2 (ne2000 MCA version) support"
depends on NET_ETHERNET && MCA_LEGACY
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 58714d68c86..6c61f3e7396 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -137,7 +137,6 @@ obj-$(CONFIG_AT1700) += at1700.o
obj-$(CONFIG_EL1) += 3c501.o
obj-$(CONFIG_EL16) += 3c507.o
obj-$(CONFIG_ELMC) += 3c523.o
-obj-$(CONFIG_SKMC) += sk_mca.o
obj-$(CONFIG_IBMLANA) += ibmlana.o
obj-$(CONFIG_ELMC_II) += 3c527.o
obj-$(CONFIG_EL3) += 3c509.o
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 9305eb9b1b9..dd8ed456c8b 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -59,7 +59,6 @@ extern struct net_device *wavelan_probe(int unit);
extern struct net_device *arlan_probe(int unit);
extern struct net_device *el16_probe(int unit);
extern struct net_device *elmc_probe(int unit);
-extern struct net_device *skmca_probe(int unit);
extern struct net_device *elplus_probe(int unit);
extern struct net_device *ac3200_probe(int unit);
extern struct net_device *es_probe(int unit);
@@ -153,9 +152,6 @@ static struct devprobe2 mca_probes[] __initdata = {
#ifdef CONFIG_ELMC_II /* 3c527 */
{mc32_probe, 0},
#endif
-#ifdef CONFIG_SKMC /* SKnet Microchannel */
- {skmca_probe, 0},
-#endif
{NULL, 0},
};
diff --git a/drivers/net/sk_mca.c b/drivers/net/sk_mca.c
deleted file mode 100644
index 96e06c51b75..00000000000
--- a/drivers/net/sk_mca.c
+++ /dev/null
@@ -1,1216 +0,0 @@
-/*
-net-3-driver for the SKNET MCA-based cards
-
-This is an extension to the Linux operating system, and is covered by the
-same GNU General Public License that covers that work.
-
-Copyright 1999 by Alfred Arnold (alfred@ccac.rwth-aachen.de,
- alfred.arnold@lancom.de)
-
-This driver is based both on the 3C523 driver and the SK_G16 driver.
-
-paper sources:
- 'PC Hardware: Aufbau, Funktionsweise, Programmierung' by
- Hans-Peter Messmer for the basic Microchannel stuff
-
- 'Linux Geraetetreiber' by Allesandro Rubini, Kalle Dalheimer
- for help on Ethernet driver programming
-
- 'Ethernet/IEEE 802.3 Family 1992 World Network Data Book/Handbook' by AMD
- for documentation on the AM7990 LANCE
-
- 'SKNET Personal Technisches Manual', Version 1.2 by Schneider&Koch
- for documentation on the Junior board
-
- 'SK-NET MC2+ Technical Manual", Version 1.1 by Schneider&Koch for
- documentation on the MC2 bord
-
- A big thank you to the S&K support for providing me so quickly with
- documentation!
-
- Also see http://www.syskonnect.com/
-
- Missing things:
-
- -> set debug level via ioctl instead of compile-time switches
- -> I didn't follow the development of the 2.1.x kernels, so my
- assumptions about which things changed with which kernel version
- are probably nonsense
-
-History:
- May 16th, 1999
- startup
- May 22st, 1999
- added private structure, methods
- begun building data structures in RAM
- May 23nd, 1999
- can receive frames, send frames
- May 24th, 1999
- modularized initialization of LANCE
- loadable as module
- still Tx problem :-(
- May 26th, 1999
- MC2 works
- support for multiple devices
- display media type for MC2+
- May 28th, 1999
- fixed problem in GetLANCE leaving interrupts turned off
- increase TX queue to 4 packets to improve send performance
- May 29th, 1999
- a few corrections in statistics, caught rcvr overruns
- reinitialization of LANCE/board in critical situations
- MCA info implemented
- implemented LANCE multicast filter
- Jun 6th, 1999
- additions for Linux 2.2
- Dec 25th, 1999
- unfortunately there seem to be newer MC2+ boards that react
- on IRQ 3/5/9/10 instead of 3/5/10/11, so we have to autoprobe
- in questionable cases...
- Dec 28th, 1999
- integrated patches from David Weinehall & Bill Wendling for 2.3
- kernels (isa_...functions). Things are defined in a way that
- it still works with 2.0.x 8-)
- Dec 30th, 1999
- added handling of the remaining interrupt conditions. That
- should cure the spurious hangs.
- Jan 30th, 2000
- newer kernels automatically probe more than one board, so the
- 'startslot' as a variable is also needed here
- June 1st, 2000
- added changes for recent 2.3 kernels
-
- *************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/time.h>
-#include <linux/mca-legacy.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/bitops.h>
-
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#define _SK_MCA_DRIVER_
-#include "sk_mca.h"
-
-/* ------------------------------------------------------------------------
- * global static data - not more since we can handle multiple boards and
- * have to pack all state info into the device struct!
- * ------------------------------------------------------------------------ */
-
-static char *MediaNames[Media_Count] =
- { "10Base2", "10BaseT", "10Base5", "Unknown" };
-
-static unsigned char poly[] =
- { 1, 1, 1, 0, 1, 1, 0, 1, 1, 0, 1, 1, 1, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 0
-};
-
-/* ------------------------------------------------------------------------
- * private subfunctions
- * ------------------------------------------------------------------------ */
-
-/* dump parts of shared memory - only needed during debugging */
-
-#ifdef DEBUG
-static void dumpmem(struct net_device *dev, u32 start, u32 len)
-{
- skmca_priv *priv = netdev_priv(dev);
- int z;
-
- for (z = 0; z < len; z++) {
- if ((z & 15) == 0)
- printk("%04x:", z);
- printk(" %02x", readb(priv->base + start + z));
- if ((z & 15) == 15)
- printk("\n");
- }
-}
-
-/* print exact time - ditto */
-
-static void PrTime(void)
-{
- struct timeval tv;
-
- do_gettimeofday(&tv);
- printk("%9d:%06d: ", tv.tv_sec, tv.tv_usec);
-}
-#endif
-
-/* deduce resources out of POS registers */
-
-static void __init getaddrs(int slot, int junior, int *base, int *irq,
- skmca_medium * medium)
-{
- u_char pos0, pos1, pos2;
-
- if (junior) {
- pos0 = mca_read_stored_pos(slot, 2);
- *base = ((pos0 & 0x0e) << 13) + 0xc0000;
- *irq = ((pos0 & 0x10) >> 4) + 10;
- *medium = Media_Unknown;
- } else {
- /* reset POS 104 Bits 0+1 so the shared memory region goes to the
- configured area between 640K and 1M. Afterwards, enable the MC2.
- I really don't know what rode SK to do this... */
-
- mca_write_pos(slot, 4,
- mca_read_stored_pos(slot, 4) & 0xfc);
- mca_write_pos(slot, 2,
- mca_read_stored_pos(slot, 2) | 0x01);
-
- pos1 = mca_read_stored_pos(slot, 3);
- pos2 = mca_read_stored_pos(slot, 4);
- *base = ((pos1 & 0x07) << 14) + 0xc0000;
- switch (pos2 & 0x0c) {
- case 0:
- *irq = 3;
- break;
- case 4:
- *irq = 5;
- break;
- case 8:
- *irq = -10;
- break;
- case 12:
- *irq = -11;
- break;
- }
- *medium = (pos2 >> 6) & 3;
- }
-}
-
-/* check for both cards:
- When the MC2 is turned off, it was configured for more than 15MB RAM,
- is disabled and won't get detected using the standard probe. We
- therefore have to scan the slots manually :-( */
-
-static int __init dofind(int *junior, int firstslot)
-{
- int slot;
- unsigned int id;
-
- for (slot = firstslot; slot < MCA_MAX_SLOT_NR; slot++) {
- id = mca_read_stored_pos(slot, 0)
- + (((unsigned int) mca_read_stored_pos(slot, 1)) << 8);
-
- *junior = 0;
- if (id == SKNET_MCA_ID)
- return slot;
- *junior = 1;
- if (id == SKNET_JUNIOR_MCA_ID)
- return slot;
- }
- return MCA_NOTFOUND;
-}
-
-/* reset the whole board */
-
-static void ResetBoard(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
-
- writeb(CTRL_RESET_ON, priv->ctrladdr);
- udelay(10);
- writeb(CTRL_RESET_OFF, priv->ctrladdr);
-}
-
-/* wait for LANCE interface to become not busy */
-
-static int WaitLANCE(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
- int t = 0;
-
- while ((readb(priv->ctrladdr) & STAT_IO_BUSY) ==
- STAT_IO_BUSY) {
- udelay(1);
- if (++t > 1000) {
- printk("%s: LANCE access timeout", dev->name);
- return 0;
- }
- }
-
- return 1;
-}
-
-/* set LANCE register - must be atomic */
-
-static void SetLANCE(struct net_device *dev, u16 addr, u16 value)
-{
- skmca_priv *priv = netdev_priv(dev);
- unsigned long flags;
-
- /* disable interrupts */
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* wait until no transfer is pending */
-
- WaitLANCE(dev);
-
- /* transfer register address to RAP */
-
- writeb(CTRL_RESET_OFF | CTRL_RW_WRITE | CTRL_ADR_RAP, priv->ctrladdr);
- writew(addr, priv->ioregaddr);
- writeb(IOCMD_GO, priv->cmdaddr);
- udelay(1);
- WaitLANCE(dev);
-
- /* transfer data to register */
-
- writeb(CTRL_RESET_OFF | CTRL_RW_WRITE | CTRL_ADR_DATA, priv->ctrladdr);
- writew(value, priv->ioregaddr);
- writeb(IOCMD_GO, priv->cmdaddr);
- udelay(1);
- WaitLANCE(dev);
-
- /* reenable interrupts */
-
- spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-/* get LANCE register */
-
-static u16 GetLANCE(struct net_device *dev, u16 addr)
-{
- skmca_priv *priv = netdev_priv(dev);
- unsigned long flags;
- unsigned int res;
-
- /* disable interrupts */
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* wait until no transfer is pending */
-
- WaitLANCE(dev);
-
- /* transfer register address to RAP */
-
- writeb(CTRL_RESET_OFF | CTRL_RW_WRITE | CTRL_ADR_RAP, priv->ctrladdr);
- writew(addr, priv->ioregaddr);
- writeb(IOCMD_GO, priv->cmdaddr);
- udelay(1);
- WaitLANCE(dev);
-
- /* transfer data from register */
-
- writeb(CTRL_RESET_OFF | CTRL_RW_READ | CTRL_ADR_DATA, priv->ctrladdr);
- writeb(IOCMD_GO, priv->cmdaddr);
- udelay(1);
- WaitLANCE(dev);
- res = readw(priv->ioregaddr);
-
- /* reenable interrupts */
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- return res;
-}
-
-/* build up descriptors in shared RAM */
-
-static void InitDscrs(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
- u32 bufaddr;
-
- /* Set up Tx descriptors. The board has only 16K RAM so bits 16..23
- are always 0. */
-
- bufaddr = RAM_DATABASE;
- {
- LANCE_TxDescr descr;
- int z;
-
- for (z = 0; z < TXCOUNT; z++) {
- descr.LowAddr = bufaddr;
- descr.Flags = 0;
- descr.Len = 0xf000;
- descr.Status = 0;
- memcpy_toio(priv->base + RAM_TXBASE +
- (z * sizeof(LANCE_TxDescr)), &descr,
- sizeof(LANCE_TxDescr));
- memset_io(priv->base + bufaddr, 0, RAM_BUFSIZE);
- bufaddr += RAM_BUFSIZE;
- }
- }
-
- /* do the same for the Rx descriptors */
-
- {
- LANCE_RxDescr descr;
- int z;
-
- for (z = 0; z < RXCOUNT; z++) {
- descr.LowAddr = bufaddr;
- descr.Flags = RXDSCR_FLAGS_OWN;
- descr.MaxLen = -RAM_BUFSIZE;
- descr.Len = 0;
- memcpy_toio(priv->base + RAM_RXBASE +
- (z * sizeof(LANCE_RxDescr)), &descr,
- sizeof(LANCE_RxDescr));
- memset_io(priv->base + bufaddr, 0, RAM_BUFSIZE);
- bufaddr += RAM_BUFSIZE;
- }
- }
-}
-
-/* calculate the hash bit position for a given multicast address
- taken more or less directly from the AMD datasheet... */
-
-static void UpdateCRC(unsigned char *CRC, int bit)
-{
- int j;
-
- /* shift CRC one bit */
-
- memmove(CRC + 1, CRC, 32 * sizeof(unsigned char));
- CRC[0] = 0;
-
- /* if bit XOR controlbit = 1, set CRC = CRC XOR polynomial */
-
- if (bit ^ CRC[32])
- for (j = 0; j < 32; j++)
- CRC[j] ^= poly[j];
-}
-
-static unsigned int GetHash(char *address)
-{
- unsigned char CRC[33];
- int i, byte, hashcode;
-
- /* a multicast address has bit 0 in the first byte set */
-
- if ((address[0] & 1) == 0)
- return -1;
-
- /* initialize CRC */
-
- memset(CRC, 1, sizeof(CRC));
-
- /* loop through address bits */
-
- for (byte = 0; byte < 6; byte++)
- for (i = 0; i < 8; i++)
- UpdateCRC(CRC, (address[byte] >> i) & 1);
-
- /* hashcode is the 6 least significant bits of the CRC */
-
- hashcode = 0;
- for (i = 0; i < 6; i++)
- hashcode = (hashcode << 1) + CRC[i];
- return hashcode;
-}
-
-/* feed ready-built initialization block into LANCE */
-
-static void InitLANCE(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
-
- /* build up descriptors. */
-
- InitDscrs(dev);
-
- /* next RX descriptor to be read is the first one. Since the LANCE
- will start from the beginning after initialization, we have to
- reset out pointers too. */
-
- priv->nextrx = 0;
-
- /* no TX descriptors active */
-
- priv->nexttxput = priv->nexttxdone = priv->txbusy = 0;
-
- /* set up the LANCE bus control register - constant for SKnet boards */
-
- SetLANCE(dev, LANCE_CSR3,
- CSR3_BSWAP_OFF | CSR3_ALE_LOW | CSR3_BCON_HOLD);
-
- /* write address of initialization block into LANCE */
-
- SetLANCE(dev, LANCE_CSR1, RAM_INITBASE & 0xffff);
- SetLANCE(dev, LANCE_CSR2, (RAM_INITBASE >> 16) & 0xff);
-
- /* we don't get ready until the LANCE has read the init block */
-
- netif_stop_queue(dev);
-
- /* let LANCE read the initialization block. LANCE is ready
- when we receive the corresponding interrupt. */
-
- SetLANCE(dev, LANCE_CSR0, CSR0_INEA | CSR0_INIT);
-}
-
-/* stop the LANCE so we can reinitialize it */
-
-static void StopLANCE(struct net_device *dev)
-{
- /* can't take frames any more */
-
- netif_stop_queue(dev);
-
- /* disable interrupts, stop it */
-
- SetLANCE(dev, LANCE_CSR0, CSR0_STOP);
-}
-
-/* initialize card and LANCE for proper operation */
-
-static void InitBoard(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
- LANCE_InitBlock block;
-
- /* Lay out the shared RAM - first we create the init block for the LANCE.
- We do not overwrite it later because we need it again when we switch
- promiscous mode on/off. */
-
- block.Mode = 0;
- if (dev->flags & IFF_PROMISC)
- block.Mode |= LANCE_INIT_PROM;
- memcpy(block.PAdr, dev->dev_addr, 6);
- memset(block.LAdrF, 0, sizeof(block.LAdrF));
- block.RdrP = (RAM_RXBASE & 0xffffff) | (LRXCOUNT << 29);
- block.TdrP = (RAM_TXBASE & 0xffffff) | (LTXCOUNT << 29);
-
- memcpy_toio(priv->base + RAM_INITBASE, &block, sizeof(block));
-
- /* initialize LANCE. Implicitly sets up other structures in RAM. */
-
- InitLANCE(dev);
-}
-
-/* deinitialize card and LANCE */
-
-static void DeinitBoard(struct net_device *dev)
-{
- /* stop LANCE */
-
- StopLANCE(dev);
-
- /* reset board */
-
- ResetBoard(dev);
-}
-
-/* probe for device's irq */
-
-static int __init ProbeIRQ(struct net_device *dev)
-{
- unsigned long imaskval, njiffies, irq;
- u16 csr0val;
-
- /* enable all interrupts */
-
- imaskval = probe_irq_on();
-
- /* initialize the board. Wait for interrupt 'Initialization done'. */
-
- ResetBoard(dev);
- InitBoard(dev);
-
- njiffies = jiffies + HZ;
- do {
- csr0val = GetLANCE(dev, LANCE_CSR0);
- }
- while (((csr0val & CSR0_IDON) == 0) && (jiffies != njiffies));
-
- /* turn of interrupts again */
-
- irq = probe_irq_off(imaskval);
-
- /* if we found something, ack the interrupt */
-
- if (irq)
- SetLANCE(dev, LANCE_CSR0, csr0val | CSR0_IDON);
-
- /* back to idle state */
-
- DeinitBoard(dev);
-
- return irq;
-}
-
-/* ------------------------------------------------------------------------
- * interrupt handler(s)
- * ------------------------------------------------------------------------ */
-
-/* LANCE has read initialization block -> start it */
-
-static u16 irqstart_handler(struct net_device *dev, u16 oldcsr0)
-{
- /* now we're ready to transmit */
-
- netif_wake_queue(dev);
-
- /* reset IDON bit, start LANCE */
-
- SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_IDON | CSR0_STRT);
- return GetLANCE(dev, LANCE_CSR0);
-}
-
-/* did we lose blocks due to a FIFO overrun ? */
-
-static u16 irqmiss_handler(struct net_device *dev, u16 oldcsr0)
-{
- skmca_priv *priv = netdev_priv(dev);
-
- /* update statistics */
-
- priv->stat.rx_fifo_errors++;
-
- /* reset MISS bit */
-
- SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_MISS);
- return GetLANCE(dev, LANCE_CSR0);
-}
-
-/* receive interrupt */
-
-static u16 irqrx_handler(struct net_device *dev, u16 oldcsr0)
-{
- skmca_priv *priv = netdev_priv(dev);
- LANCE_RxDescr descr;
- unsigned int descraddr;
-
- /* run through queue until we reach a descriptor we do not own */
-
- descraddr = RAM_RXBASE + (priv->nextrx * sizeof(LANCE_RxDescr));
- while (1) {
- /* read descriptor */
- memcpy_fromio(&descr, priv->base + descraddr,
- sizeof(LANCE_RxDescr));
-
- /* if we reach a descriptor we do not own, we're done */
- if ((descr.Flags & RXDSCR_FLAGS_OWN) != 0)
- break;
-
-#ifdef DEBUG
- PrTime();
- printk("Receive packet on descr %d len %d\n", priv->nextrx,
- descr.Len);
-#endif
-
- /* erroneous packet ? */
- if ((descr.Flags & RXDSCR_FLAGS_ERR) != 0) {
- priv->stat.rx_errors++;
- if ((descr.Flags & RXDSCR_FLAGS_CRC) != 0)
- priv->stat.rx_crc_errors++;
- else if ((descr.Flags & RXDSCR_FLAGS_CRC) != 0)
- priv->stat.rx_frame_errors++;
- else if ((descr.Flags & RXDSCR_FLAGS_OFLO) != 0)
- priv->stat.rx_fifo_errors++;
- }
-
- /* good packet ? */
- else {
- struct sk_buff *skb;
-
- skb = dev_alloc_skb(descr.Len + 2);
- if (skb == NULL)
- priv->stat.rx_dropped++;
- else {
- memcpy_fromio(skb_put(skb, descr.Len),
- priv->base +
- descr.LowAddr, descr.Len);
- skb->dev = dev;
- skb->protocol = eth_type_trans(skb, dev);
- skb->ip_summed = CHECKSUM_NONE;
- priv->stat.rx_packets++;
- priv->stat.rx_bytes += descr.Len;
- netif_rx(skb);
- dev->last_rx = jiffies;
- }
- }
-
- /* give descriptor back to LANCE */
- descr.Len = 0;
- descr.Flags |= RXDSCR_FLAGS_OWN;
-
- /* update descriptor in shared RAM */
- memcpy_toio(priv->base + descraddr, &descr,
- sizeof(LANCE_RxDescr));
-
- /* go to next descriptor */
- priv->nextrx++;
- descraddr += sizeof(LANCE_RxDescr);
- if (priv->nextrx >= RXCOUNT) {
- priv->nextrx = 0;
- descraddr = RAM_RXBASE;
- }
- }
-
- /* reset RINT bit */
-
- SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_RINT);
- return GetLANCE(dev, LANCE_CSR0);
-}
-
-/* transmit interrupt */
-
-static u16 irqtx_handler(struct net_device *dev, u16 oldcsr0)
-{
- skmca_priv *priv = netdev_priv(dev);
- LANCE_TxDescr descr;
- unsigned int descraddr;
-
- /* check descriptors at most until no busy one is left */
-
- descraddr =
- RAM_TXBASE + (priv->nexttxdone * sizeof(LANCE_TxDescr));
- while (priv->txbusy > 0) {
- /* read descriptor */
- memcpy_fromio(&descr, priv->base + descraddr,
- sizeof(LANCE_TxDescr));
-
- /* if the LANCE still owns this one, we've worked out all sent packets */
- if ((descr.Flags & TXDSCR_FLAGS_OWN) != 0)
- break;
-
-#ifdef DEBUG
- PrTime();
- printk("Send packet done on descr %d\n", priv->nexttxdone);
-#endif
-
- /* update statistics */
- if ((descr.Flags & TXDSCR_FLAGS_ERR) == 0) {
- priv->stat.tx_packets++;
- priv->stat.tx_bytes++;
- } else {
- priv->stat.tx_errors++;
- if ((descr.Status & TXDSCR_STATUS_UFLO) != 0) {
- priv->stat.tx_fifo_errors++;
- InitLANCE(dev);
- }
- else
- if ((descr.Status & TXDSCR_STATUS_LCOL) !=
- 0) priv->stat.tx_window_errors++;
- else if ((descr.Status & TXDSCR_STATUS_LCAR) != 0)
- priv->stat.tx_carrier_errors++;
- else if ((descr.Status & TXDSCR_STATUS_RTRY) != 0)
- priv->stat.tx_aborted_errors++;
- }
-
- /* go to next descriptor */
- priv->nexttxdone++;
- descraddr += sizeof(LANCE_TxDescr);
- if (priv->nexttxdone >= TXCOUNT) {
- priv->nexttxdone = 0;
- descraddr = RAM_TXBASE;
- }
- priv->txbusy--;
- }
-
- /* reset TX interrupt bit */
-
- SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_TINT);
- oldcsr0 = GetLANCE(dev, LANCE_CSR0);
-
- /* at least one descriptor is freed. Therefore we can accept
- a new one */
- /* inform upper layers we're in business again */
-
- netif_wake_queue(dev);
-
- return oldcsr0;
-}
-
-/* general interrupt entry */
-
-static irqreturn_t irq_handler(int irq, void *device)
-{
- struct net_device *dev = (struct net_device *) device;
- u16 csr0val;
-
- /* read CSR0 to get interrupt cause */
-
- csr0val = GetLANCE(dev, LANCE_CSR0);
-
- /* in case we're not meant... */
-
- if ((csr0val & CSR0_INTR) == 0)
- return IRQ_NONE;
-
-#if 0
- set_bit(LINK_STATE_RXSEM, &dev->state);
-#endif
-
- /* loop through the interrupt bits until everything is clear */
-
- do {
- if ((csr0val & CSR0_IDON) != 0)
- csr0val = irqstart_handler(dev, csr0val);
- if ((csr0val & CSR0_RINT) != 0)
- csr0val = irqrx_handler(dev, csr0val);
- if ((csr0val & CSR0_MISS) != 0)
- csr0val = irqmiss_handler(dev, csr0val);
- if ((csr0val & CSR0_TINT) != 0)
- csr0val = irqtx_handler(dev, csr0val);
- if ((csr0val & CSR0_MERR) != 0) {
- SetLANCE(dev, LANCE_CSR0, csr0val | CSR0_MERR);
- csr0val = GetLANCE(dev, LANCE_CSR0);
- }
- if ((csr0val & CSR0_BABL) != 0) {
- SetLANCE(dev, LANCE_CSR0, csr0val | CSR0_BABL);
- csr0val = GetLANCE(dev, LANCE_CSR0);
- }
- }
- while ((csr0val & CSR0_INTR) != 0);
-
-#if 0
- clear_bit(LINK_STATE_RXSEM, &dev->state);
-#endif
- return IRQ_HANDLED;
-}
-
-/* ------------------------------------------------------------------------
- * driver methods
- * ------------------------------------------------------------------------ */
-
-/* MCA info */
-
-static int skmca_getinfo(char *buf, int slot, void *d)
-{
- int len = 0, i;
- struct net_device *dev = (struct net_device *) d;
- skmca_priv *priv;
-
- /* can't say anything about an uninitialized device... */
-
- if (dev == NULL)
- return len;
- priv = netdev_priv(dev);
-
- /* print info */
-
- len += sprintf(buf + len, "IRQ: %d\n", priv->realirq);
- len += sprintf(buf + len, "Memory: %#lx-%#lx\n", dev->mem_start,
- dev->mem_end - 1);
- len +=
- sprintf(buf + len, "Transceiver: %s\n",
- MediaNames[priv->medium]);
- len += sprintf(buf + len, "Device: %s\n", dev->name);
- len += sprintf(buf + len, "MAC address:");
- for (i = 0; i < 6; i++)
- len += sprintf(buf + len, " %02x", dev->dev_addr[i]);
- buf[len++] = '\n';
- buf[len] = 0;
-
- return len;
-}
-
-/* open driver. Means also initialization and start of LANCE */
-
-static int skmca_open(struct net_device *dev)
-{
- int result;
- skmca_priv *priv = netdev_priv(dev);
-
- /* register resources - only necessary for IRQ */
- result =
- request_irq(priv->realirq, irq_handler,
- IRQF_SHARED | IRQF_SAMPLE_RANDOM, "sk_mca", dev);
- if (result != 0) {
- printk("%s: failed to register irq %d\n", dev->name,
- dev->irq);
- return result;
- }
- dev->irq = priv->realirq;
-
- /* set up the card and LANCE */
-
- InitBoard(dev);
-
- /* set up flags */
-
- netif_start_queue(dev);
-
- return 0;
-}
-
-/* close driver. Shut down board and free allocated resources */
-
-static int skmca_close(struct net_device *dev)
-{
- /* turn off board */
- DeinitBoard(dev);
-
- /* release resources */
- if (dev->irq != 0)
- free_irq(dev->irq, dev);
- dev->irq = 0;
-
- return 0;
-}
-
-/* transmit a block. */
-
-static int skmca_tx(struct sk_buff *skb, struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
- LANCE_TxDescr descr;
- unsigned int address;
- int tmplen, retval = 0;
- unsigned long flags;
-
- /* if we get called with a NULL descriptor, the Ethernet layer thinks
- our card is stuck an we should reset it. We'll do this completely: */
-
- if (skb == NULL) {
- DeinitBoard(dev);
- InitBoard(dev);
- return 0; /* don't try to free the block here ;-) */
- }
-
- /* is there space in the Tx queue ? If no, the upper layer gave us a
- packet in spite of us not being ready and is really in trouble.
- We'll do the dropping for him: */
- if (priv->txbusy >= TXCOUNT) {
- priv->stat.tx_dropped++;
- retval = -EIO;
- goto tx_done;
- }
-
- /* get TX descriptor */
- address = RAM_TXBASE + (priv->nexttxput * sizeof(LANCE_TxDescr));
- memcpy_fromio(&descr, priv->base + address, sizeof(LANCE_TxDescr));
-
- /* enter packet length as 2s complement - assure minimum length */
- tmplen = skb->len;
- if (tmplen < 60)
- tmplen = 60;
- descr.Len = 65536 - tmplen;
-
- /* copy filler into RAM - in case we're filling up...
- we're filling a bit more than necessary, but that doesn't harm
- since the buffer is far larger... */
- if (tmplen > skb->len) {
- char *fill = "NetBSD is a nice OS too! ";
- unsigned int destoffs = 0, l = strlen(fill);
-
- while (destoffs < tmplen) {
- memcpy_toio(priv->base + descr.LowAddr +
- destoffs, fill, l);
- destoffs += l;
- }
- }
-
- /* do the real data copying */
- memcpy_toio(priv->base + descr.LowAddr, skb->data, skb->len);
-
- /* hand descriptor over to LANCE - this is the first and last chunk */
- descr.Flags =
- TXDSCR_FLAGS_OWN | TXDSCR_FLAGS_STP | TXDSCR_FLAGS_ENP;
-
-#ifdef DEBUG
- PrTime();
- printk("Send packet on descr %d len %d\n", priv->nexttxput,
- skb->len);
-#endif
-
- /* one more descriptor busy */
-
- spin_lock_irqsave(&priv->lock, flags);
-
- priv->nexttxput++;
- if (priv->nexttxput >= TXCOUNT)
- priv->nexttxput = 0;
- priv->txbusy++;
-
- /* are we saturated ? */
-
- if (priv->txbusy >= TXCOUNT)
- netif_stop_queue(dev);
-
- /* write descriptor back to RAM */
- memcpy_toio(priv->base + address, &descr, sizeof(LANCE_TxDescr));
-
- /* if no descriptors were active, give the LANCE a hint to read it
- immediately */
-
- if (priv->txbusy == 0)
- SetLANCE(dev, LANCE_CSR0, CSR0_INEA | CSR0_TDMD);
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- tx_done:
-
- dev_kfree_skb(skb);
-
- return retval;
-}
-
-/* return pointer to Ethernet statistics */
-
-static struct net_device_stats *skmca_stats(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
-
- return &(priv->stat);
-}
-
-/* switch receiver mode. We use the LANCE's multicast filter to prefilter
- multicast addresses. */
-
-static void skmca_set_multicast_list(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
- LANCE_InitBlock block;
-
- /* first stop the LANCE... */
- StopLANCE(dev);
-
- /* ...then modify the initialization block... */
- memcpy_fromio(&block, priv->base + RAM_INITBASE, sizeof(block));
- if (dev->flags & IFF_PROMISC)
- block.Mode |= LANCE_INIT_PROM;
- else
- block.Mode &= ~LANCE_INIT_PROM;
-
- if (dev->flags & IFF_ALLMULTI) { /* get all multicasts */
- memset(block.LAdrF, 0xff, sizeof(block.LAdrF));
- } else { /* get selected/no multicasts */
-
- struct dev_mc_list *mptr;
- int code;
-
- memset(block.LAdrF, 0, sizeof(block.LAdrF));
- for (mptr = dev->mc_list; mptr != NULL; mptr = mptr->next) {
- code = GetHash(mptr->dmi_addr);
- block.LAdrF[(code >> 3) & 7] |= 1 << (code & 7);
- }
- }
-
- memcpy_toio(priv->base + RAM_INITBASE, &block, sizeof(block));
-
- /* ...then reinit LANCE with the correct flags */
- InitLANCE(dev);
-}
-
-/* ------------------------------------------------------------------------
- * hardware check
- * ------------------------------------------------------------------------ */
-
-static int startslot; /* counts through slots when probing multiple devices */
-
-static void cleanup_card(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
- DeinitBoard(dev);
- if (dev->irq != 0)
- free_irq(dev->irq, dev);
- iounmap(priv->base);
- mca_mark_as_unused(priv->slot);
- mca_set_adapter_procfn(priv->slot, NULL, NULL);
-}
-
-struct net_device * __init skmca_probe(int unit)
-{
- struct net_device *dev;
- int force_detect = 0;
- int junior, slot, i;
- int base = 0, irq = 0;
- skmca_priv *priv;
- skmca_medium medium;
- int err;
-
- /* can't work without an MCA bus ;-) */
-
- if (MCA_bus == 0)
- return ERR_PTR(-ENODEV);
-
- dev = alloc_etherdev(sizeof(skmca_priv));
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- if (unit >= 0) {
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
- }
-
- SET_MODULE_OWNER(dev);
-
- /* start address of 1 --> forced detection */
-
- if (dev->mem_start == 1)
- force_detect = 1;
-
- /* search through slots */
-
- base = dev->mem_start;
- irq = dev->base_addr;
- for (slot = startslot; (slot = dofind(&junior, slot)) != -1; slot++) {
- /* deduce card addresses */
-
- getaddrs(slot, junior, &base, &irq, &medium);
-
- /* slot already in use ? */
-
- if (mca_is_adapter_used(slot))
- continue;
-
- /* were we looking for something different ? */
-
- if (dev->irq && dev->irq != irq)
- continue;
- if (dev->mem_start && dev->mem_start != base)
- continue;
-
- /* found something that matches */
-
- break;
- }
-
- /* nothing found ? */
-
- if (slot == -1) {
- free_netdev(dev);
- return (base || irq) ? ERR_PTR(-ENXIO) : ERR_PTR(-ENODEV);
- }
-
- /* make procfs entries */
-
- if (junior)
- mca_set_adapter_name(slot,
- "SKNET junior MC2 Ethernet Adapter");
- else
- mca_set_adapter_name(slot, "SKNET MC2+ Ethernet Adapter");
- mca_set_adapter_procfn(slot, (MCA_ProcFn) skmca_getinfo, dev);
-
- mca_mark_as_used(slot);
-
- /* announce success */
- printk("%s: SKNet %s adapter found in slot %d\n", dev->name,
- junior ? "Junior MC2" : "MC2+", slot + 1);
-
- priv = netdev_priv(dev);
- priv->base = ioremap(base, 0x4000);
- if (!priv->base) {
- mca_set_adapter_procfn(slot, NULL, NULL);
- mca_mark_as_unused(slot);
- free_netdev(dev);
- return ERR_PTR(-ENOMEM);
- }
-
- priv->slot = slot;
- priv->macbase = priv->base + 0x3fc0;
- priv->ioregaddr = priv->base + 0x3ff0;
- priv->ctrladdr = priv->base + 0x3ff2;
- priv->cmdaddr = priv->base + 0x3ff3;
- priv->medium = medium;
- memset(&priv->stat, 0, sizeof(struct net_device_stats));
- spin_lock_init(&priv->lock);
-
- /* set base + irq for this device (irq not allocated so far) */
- dev->irq = 0;
- dev->mem_start = base;
- dev->mem_end = base + 0x4000;
-
- /* autoprobe ? */
- if (irq < 0) {
- int nirq;
-
- printk
- ("%s: ambigous POS bit combination, must probe for IRQ...\n",
- dev->name);
- nirq = ProbeIRQ(dev);
- if (nirq <= 0)
- printk("%s: IRQ probe failed, assuming IRQ %d",
- dev->name, priv->realirq = -irq);
- else
- priv->realirq = nirq;
- } else
- priv->realirq = irq;
-
- /* set methods */
- dev->open = skmca_open;
- dev->stop = skmca_close;
- dev->hard_start_xmit = skmca_tx;
- dev->do_ioctl = NULL;
- dev->get_stats = skmca_stats;
- dev->set_multicast_list = skmca_set_multicast_list;
- dev->flags |= IFF_MULTICAST;
-
- /* copy out MAC address */
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = readb(priv->macbase + (i << 1));
-
- /* print config */
- printk("%s: IRQ %d, memory %#lx-%#lx, "
- "MAC address %02x:%02x:%02x:%02x:%02x:%02x.\n",
- dev->name, priv->realirq, dev->mem_start, dev->mem_end - 1,
- dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
- dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
- printk("%s: %s medium\n", dev->name, MediaNames[priv->medium]);
-
- /* reset board */
-
- ResetBoard(dev);
-
- startslot = slot + 1;
-
- err = register_netdev(dev);
- if (err) {
- cleanup_card(dev);
- free_netdev(dev);
- dev = ERR_PTR(err);
- }
- return dev;
-}
-
-/* ------------------------------------------------------------------------
- * modularization support
- * ------------------------------------------------------------------------ */
-
-#ifdef MODULE
-MODULE_LICENSE("GPL");
-
-#define DEVMAX 5
-
-static struct net_device *moddevs[DEVMAX];
-
-int init_module(void)
-{
- int z;
-
- startslot = 0;
- for (z = 0; z < DEVMAX; z++) {
- struct net_device *dev = skmca_probe(-1);
- if (IS_ERR(dev))
- break;
- moddevs[z] = dev;
- }
- if (!z)
- return -EIO;
- return 0;
-}
-
-void cleanup_module(void)
-{
- int z;
-
- for (z = 0; z < DEVMAX; z++) {
- struct net_device *dev = moddevs[z];
- if (dev) {
- unregister_netdev(dev);
- cleanup_card(dev);
- free_netdev(dev);
- }
- }
-}
-#endif /* MODULE */
diff --git a/drivers/net/sk_mca.h b/drivers/net/sk_mca.h
deleted file mode 100644
index 0dae056fed9..00000000000
--- a/drivers/net/sk_mca.h
+++ /dev/null
@@ -1,170 +0,0 @@
-#ifndef _SK_MCA_INCLUDE_
-#define _SK_MCA_INCLUDE_
-
-#ifdef _SK_MCA_DRIVER_
-
-/* Adapter ID's */
-#define SKNET_MCA_ID 0x6afd
-#define SKNET_JUNIOR_MCA_ID 0x6be9
-
-/* media enumeration - defined in a way that it fits onto the MC2+'s
- POS registers... */
-
-typedef enum { Media_10Base2, Media_10BaseT,
- Media_10Base5, Media_Unknown, Media_Count
-} skmca_medium;
-
-/* private structure */
-typedef struct {
- unsigned int slot; /* MCA-Slot-# */
- void __iomem *base;
- void __iomem *macbase; /* base address of MAC address PROM */
- void __iomem *ioregaddr;/* address of I/O-register (Lo) */
- void __iomem *ctrladdr; /* address of control/stat register */
- void __iomem *cmdaddr; /* address of I/O-command register */
- int nextrx; /* index of next RX descriptor to
- be read */
- int nexttxput; /* index of next free TX descriptor */
- int nexttxdone; /* index of next TX descriptor to
- be finished */
- int txbusy; /* # of busy TX descriptors */
- struct net_device_stats stat; /* packet statistics */
- int realirq; /* memorizes actual IRQ, even when
- currently not allocated */
- skmca_medium medium; /* physical cannector */
- spinlock_t lock;
-} skmca_priv;
-
-/* card registers: control/status register bits */
-
-#define CTRL_ADR_DATA 0 /* Bit 0 = 0 ->access data register */
-#define CTRL_ADR_RAP 1 /* Bit 0 = 1 ->access RAP register */
-#define CTRL_RW_WRITE 0 /* Bit 1 = 0 ->write register */
-#define CTRL_RW_READ 2 /* Bit 1 = 1 ->read register */
-#define CTRL_RESET_ON 0 /* Bit 3 = 0 ->reset board */
-#define CTRL_RESET_OFF 8 /* Bit 3 = 1 ->no reset of board */
-
-#define STAT_ADR_DATA 0 /* Bit 0 of ctrl register read back */
-#define STAT_ADR_RAP 1
-#define STAT_RW_WRITE 0 /* Bit 1 of ctrl register read back */
-#define STAT_RW_READ 2
-#define STAT_RESET_ON 0 /* Bit 3 of ctrl register read back */
-#define STAT_RESET_OFF 8
-#define STAT_IRQ_ACT 0 /* interrupt pending */
-#define STAT_IRQ_NOACT 16 /* no interrupt pending */
-#define STAT_IO_NOBUSY 0 /* no transfer busy */
-#define STAT_IO_BUSY 32 /* transfer busy */
-
-/* I/O command register bits */
-
-#define IOCMD_GO 128 /* Bit 7 = 1 -> start register xfer */
-
-/* LANCE registers */
-
-#define LANCE_CSR0 0 /* Status/Control */
-
-#define CSR0_ERR 0x8000 /* general error flag */
-#define CSR0_BABL 0x4000 /* transmitter timeout */
-#define CSR0_CERR 0x2000 /* collision error */
-#define CSR0_MISS 0x1000 /* lost Rx block */
-#define CSR0_MERR 0x0800 /* memory access error */
-#define CSR0_RINT 0x0400 /* receiver interrupt */
-#define CSR0_TINT 0x0200 /* transmitter interrupt */
-#define CSR0_IDON 0x0100 /* initialization done */
-#define CSR0_INTR 0x0080 /* general interrupt flag */
-#define CSR0_INEA 0x0040 /* interrupt enable */
-#define CSR0_RXON 0x0020 /* receiver enabled */
-#define CSR0_TXON 0x0010 /* transmitter enabled */
-#define CSR0_TDMD 0x0008 /* force transmission now */
-#define CSR0_STOP 0x0004 /* stop LANCE */
-#define CSR0_STRT 0x0002 /* start LANCE */
-#define CSR0_INIT 0x0001 /* read initialization block */
-
-#define LANCE_CSR1 1 /* addr bit 0..15 of initialization */
-#define LANCE_CSR2 2 /* 16..23 block */
-
-#define LANCE_CSR3 3 /* Bus control */
-#define CSR3_BCON_HOLD 0 /* Bit 0 = 0 -> BM1,BM0,HOLD */
-#define CSR3_BCON_BUSRQ 1 /* Bit 0 = 1 -> BUSAK0,BYTE,BUSRQ */
-#define CSR3_ALE_HIGH 0 /* Bit 1 = 0 -> ALE asserted high */
-#define CSR3_ALE_LOW 2 /* Bit 1 = 1 -> ALE asserted low */
-#define CSR3_BSWAP_OFF 0 /* Bit 2 = 0 -> no byte swap */
-#define CSR3_BSWAP_ON 4 /* Bit 2 = 1 -> byte swap */
-
-/* LANCE structures */
-
-typedef struct { /* LANCE initialization block */
- u16 Mode; /* mode flags */
- u8 PAdr[6]; /* MAC address */
- u8 LAdrF[8]; /* Multicast filter */
- u32 RdrP; /* Receive descriptor */
- u32 TdrP; /* Transmit descriptor */
-} LANCE_InitBlock;
-
-/* Mode flags init block */
-
-#define LANCE_INIT_PROM 0x8000 /* enable promiscous mode */
-#define LANCE_INIT_INTL 0x0040 /* internal loopback */
-#define LANCE_INIT_DRTY 0x0020 /* disable retry */
-#define LANCE_INIT_COLL 0x0010 /* force collision */
-#define LANCE_INIT_DTCR 0x0008 /* disable transmit CRC */
-#define LANCE_INIT_LOOP 0x0004 /* loopback */
-#define LANCE_INIT_DTX 0x0002 /* disable transmitter */
-#define LANCE_INIT_DRX 0x0001 /* disable receiver */
-
-typedef struct { /* LANCE Tx descriptor */
- u16 LowAddr; /* bit 0..15 of address */
- u16 Flags; /* bit 16..23 of address + Flags */
- u16 Len; /* 2s complement of packet length */
- u16 Status; /* Result of transmission */
-} LANCE_TxDescr;
-
-#define TXDSCR_FLAGS_OWN 0x8000 /* LANCE owns descriptor */
-#define TXDSCR_FLAGS_ERR 0x4000 /* summary error flag */
-#define TXDSCR_FLAGS_MORE 0x1000 /* more than one retry needed? */
-#define TXDSCR_FLAGS_ONE 0x0800 /* one retry? */
-#define TXDSCR_FLAGS_DEF 0x0400 /* transmission deferred? */
-#define TXDSCR_FLAGS_STP 0x0200 /* first packet in chain? */
-#define TXDSCR_FLAGS_ENP 0x0100 /* last packet in chain? */
-
-#define TXDSCR_STATUS_BUFF 0x8000 /* buffer error? */
-#define TXDSCR_STATUS_UFLO 0x4000 /* silo underflow during transmit? */
-#define TXDSCR_STATUS_LCOL 0x1000 /* late collision? */
-#define TXDSCR_STATUS_LCAR 0x0800 /* loss of carrier? */
-#define TXDSCR_STATUS_RTRY 0x0400 /* retry error? */
-
-typedef struct { /* LANCE Rx descriptor */
- u16 LowAddr; /* bit 0..15 of address */
- u16 Flags; /* bit 16..23 of address + Flags */
- u16 MaxLen; /* 2s complement of buffer length */
- u16 Len; /* packet length */
-} LANCE_RxDescr;
-
-#define RXDSCR_FLAGS_OWN 0x8000 /* LANCE owns descriptor */
-#define RXDSCR_FLAGS_ERR 0x4000 /* summary error flag */
-#define RXDSCR_FLAGS_FRAM 0x2000 /* framing error flag */
-#define RXDSCR_FLAGS_OFLO 0x1000 /* FIFO overflow? */
-#define RXDSCR_FLAGS_CRC 0x0800 /* CRC error? */
-#define RXDSCR_FLAGS_BUFF 0x0400 /* buffer error? */
-#define RXDSCR_FLAGS_STP 0x0200 /* first packet in chain? */
-#define RXDCSR_FLAGS_ENP 0x0100 /* last packet in chain? */
-
-/* RAM layout */
-
-#define TXCOUNT 4 /* length of TX descriptor queue */
-#define LTXCOUNT 2 /* log2 of it */
-#define RXCOUNT 4 /* length of RX descriptor queue */
-#define LRXCOUNT 2 /* log2 of it */
-
-#define RAM_INITBASE 0 /* LANCE init block */
-#define RAM_TXBASE 24 /* Start of TX descriptor queue */
-#define RAM_RXBASE \
-(RAM_TXBASE + (TXCOUNT * 8)) /* Start of RX descriptor queue */
-#define RAM_DATABASE \
-(RAM_RXBASE + (RXCOUNT * 8)) /* Start of data area for frames */
-#define RAM_BUFSIZE 1580 /* max. frame size - should never be
- reached */
-
-#endif /* _SK_MCA_DRIVER_ */
-
-#endif /* _SK_MCA_INCLUDE_ */