diff options
Diffstat (limited to 'drivers')
61 files changed, 1712 insertions, 27951 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index 050323fd79e..4e6487d461f 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -24,8 +24,6 @@ source "drivers/scsi/Kconfig" source "drivers/ata/Kconfig" -source "drivers/cdrom/Kconfig" - source "drivers/md/Kconfig" source "drivers/message/fusion/Kconfig" diff --git a/drivers/acorn/block/fd1772.c b/drivers/acorn/block/fd1772.c index 674bf81c6e6..423ed08fb6f 100644 --- a/drivers/acorn/block/fd1772.c +++ b/drivers/acorn/block/fd1772.c @@ -1246,7 +1246,7 @@ repeat: del_timer(&motor_off_timer); ReqCnt = 0; - ReqCmd = CURRENT->cmd; + ReqCmd = rq_data_dir(CURRENT); ReqBlock = CURRENT->sector; ReqBuffer = CURRENT->buffer; setup_req_params(drive); diff --git a/drivers/acorn/block/mfmhd.c b/drivers/acorn/block/mfmhd.c index 689a4c3542b..d85520f78e6 100644 --- a/drivers/acorn/block/mfmhd.c +++ b/drivers/acorn/block/mfmhd.c @@ -439,7 +439,7 @@ static void mfm_rw_intr(void) a choice of command end or some data which is ready to be collected */ /* I think we have to transfer data while the interrupt line is on and its not any other type of interrupt */ - if (CURRENT->cmd == WRITE) { + if (rq_data_dir(CURRENT) == WRITE) { extern void hdc63463_writedma(void); if ((hdc63463_dataleft <= 0) && (!(mfm_status & STAT_CED))) { printk("mfm_rw_intr: Apparent DMA write request when no more to DMA\n"); @@ -799,7 +799,7 @@ static void issue_request(unsigned int block, unsigned int nsect, raw_cmd.head = start_head; raw_cmd.cylinder = track / p->heads; raw_cmd.cmdtype = CURRENT->cmd; - raw_cmd.cmdcode = CURRENT->cmd == WRITE ? CMD_WD : CMD_RD; + raw_cmd.cmdcode = rq_data_dir(CURRENT) == WRITE ? CMD_WD : CMD_RD; raw_cmd.cmddata[0] = dev + 1; /* DAG: +1 to get US */ raw_cmd.cmddata[1] = raw_cmd.head; raw_cmd.cmddata[2] = raw_cmd.cylinder >> 8; @@ -830,7 +830,7 @@ static void issue_request(unsigned int block, unsigned int nsect, hdc63463_dataleft = nsect * 256; /* Better way? */ DBG("mfm%c: %sing: CHS=%d/%d/%d, sectors=%d, buffer=0x%08lx (%p)\n", - raw_cmd.dev + 'a', (CURRENT->cmd == READ) ? "read" : "writ", + raw_cmd.dev + 'a', rq_data_dir(CURRENT) == READ ? "read" : "writ", raw_cmd.cylinder, raw_cmd.head, raw_cmd.sector, nsect, (unsigned long) Copy_buffer, CURRENT); @@ -917,13 +917,6 @@ static void mfm_request(void) DBG("mfm_request: block after offset=%d\n", block); - if (CURRENT->cmd != READ && CURRENT->cmd != WRITE) { - printk("unknown mfm-command %d\n", CURRENT->cmd); - end_request(CURRENT, 0); - Busy = 0; - printk("mfm: continue 4\n"); - continue; - } issue_request(block, nsect, CURRENT); break; diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index b4c8319138b..6e23af1ecbd 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -2,9 +2,12 @@ # Block device driver configuration # -if BLOCK +menuconfig BLK_DEV + bool "Block devices" + depends on BLOCK + default y -menu "Block devices" +if BLK_DEV config BLK_DEV_FD tristate "Normal floppy disk support" @@ -56,40 +59,9 @@ config AMIGA_Z2RAM To compile this driver as a module, choose M here: the module will be called z2ram. -config ATARI_ACSI - tristate "Atari ACSI support" - depends on ATARI && BROKEN - ---help--- - This enables support for the Atari ACSI interface. The driver - supports hard disks and CD-ROMs, which have 512-byte sectors, or can - be switched to that mode. Due to the ACSI command format, only disks - up to 1 GB are supported. Special support for certain ACSI to SCSI - adapters, which could relax that, isn't included yet. The ACSI - driver is also the basis for certain other drivers for devices - attached to the ACSI bus: Atari SLM laser printer, BioNet-100 - Ethernet, and PAMsNet Ethernet. If you want to use one of these - devices, you need ACSI support, too. - - To compile this driver as a module, choose M here: the - module will be called acsi. - -comment "Some devices (e.g. CD jukebox) support multiple LUNs" - depends on ATARI && ATARI_ACSI - -config ACSI_MULTI_LUN - bool "Probe all LUNs on each ACSI device" - depends on ATARI_ACSI - help - If you have a ACSI device that supports more than one LUN (Logical - Unit Number), e.g. a CD jukebox, you should say Y here so that all - will be found by the ACSI driver. An ACSI device with multiple LUNs - acts logically like multiple ACSI devices. The vast majority of ACSI - devices have only one LUN, and so most people can say N here and - should in fact do so, because it is safer. - config ATARI_SLM tristate "Atari SLM laser printer support" - depends on ATARI && ATARI_ACSI!=n + depends on ATARI help If you have an Atari SLM laser printer, say Y to include support for it in the kernel. Otherwise, say N. This driver is also available as @@ -453,6 +425,4 @@ config ATA_OVER_ETH source "drivers/s390/block/Kconfig" -endmenu - -endif +endif # BLK_DEV diff --git a/drivers/block/Makefile b/drivers/block/Makefile index dd88e33c1eb..e5f98acc5d5 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -9,7 +9,6 @@ obj-$(CONFIG_MAC_FLOPPY) += swim3.o obj-$(CONFIG_BLK_DEV_FD) += floppy.o obj-$(CONFIG_AMIGA_FLOPPY) += amiflop.o obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o -obj-$(CONFIG_ATARI_ACSI) += acsi.o obj-$(CONFIG_ATARI_SLM) += acsi_slm.o obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o obj-$(CONFIG_BLK_DEV_RAM) += rd.o diff --git a/drivers/block/acsi.c b/drivers/block/acsi.c deleted file mode 100644 index e3d9152e231..00000000000 --- a/drivers/block/acsi.c +++ /dev/null @@ -1,1825 +0,0 @@ -/* - * acsi.c -- Device driver for Atari ACSI hard disks - * - * Copyright 1994 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de> - * - * Some parts are based on hd.c by Linus Torvalds - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - * - */ - -/* - * Still to in this file: - * - If a command ends with an error status (!= 0), the following - * REQUEST SENSE commands (4 to fill the ST-DMA FIFO) are done by - * polling the _IRQ signal (not interrupt-driven). This should be - * avoided in future because it takes up a non-neglectible time in - * the interrupt service routine while interrupts are disabled. - * Maybe a timer interrupt will get lost :-( - */ - -/* - * General notes: - * - * - All ACSI devices (disks, CD-ROMs, ...) use major number 28. - * Minors are organized like it is with SCSI: The upper 4 bits - * identify the device, the lower 4 bits the partition. - * The device numbers (the upper 4 bits) are given in the same - * order as the devices are found on the bus. - * - Up to 8 LUNs are supported for each target (if CONFIG_ACSI_MULTI_LUN - * is defined), but only a total of 16 devices (due to minor - * numbers...). Note that Atari allows only a maximum of 4 targets - * (i.e. controllers, not devices) on the ACSI bus! - * - A optimizing scheme similar to SCSI scatter-gather is implemented. - * - Removable media are supported. After a medium change to device - * is reinitialized (partition check etc.). Also, if the device - * knows the PREVENT/ALLOW MEDIUM REMOVAL command, the door should - * be locked and unlocked when mounting the first or unmounting the - * last filesystem on the device. The code is untested, because I - * don't have a removable hard disk. - * - */ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/timer.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/genhd.h> -#include <linux/delay.h> -#include <linux/mm.h> -#include <linux/major.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <scsi/scsi.h> /* for SCSI_IOCTL_GET_IDLUN */ -#include <scsi/scsi_ioctl.h> -#include <linux/hdreg.h> /* for HDIO_GETGEO */ -#include <linux/blkpg.h> -#include <linux/buffer_head.h> -#include <linux/blkdev.h> - -#include <asm/setup.h> -#include <asm/pgtable.h> -#include <asm/system.h> -#include <asm/uaccess.h> -#include <asm/atarihw.h> -#include <asm/atariints.h> -#include <asm/atari_acsi.h> -#include <asm/atari_stdma.h> -#include <asm/atari_stram.h> - -static void (*do_acsi)(void) = NULL; -static struct request_queue *acsi_queue; -#define QUEUE (acsi_queue) -#define CURRENT elv_next_request(acsi_queue) - -#define DEBUG -#undef DEBUG_DETECT -#undef NO_WRITE - -#define MAX_ERRORS 8 /* Max read/write errors/sector */ -#define MAX_LUN 8 /* Max LUNs per target */ -#define MAX_DEV 16 - -#define ACSI_BUFFER_SIZE (16*1024) /* "normal" ACSI buffer size */ -#define ACSI_BUFFER_MINSIZE (2048) /* min. buf size if ext. DMA */ -#define ACSI_BUFFER_SIZE_ORDER 2 /* order size for above */ -#define ACSI_BUFFER_MINSIZE_ORDER 0 /* order size for above */ -#define ACSI_BUFFER_SECTORS (ACSI_BUFFER_SIZE/512) - -#define ACSI_BUFFER_ORDER \ - (ATARIHW_PRESENT(EXTD_DMA) ? \ - ACSI_BUFFER_MINSIZE_ORDER : \ - ACSI_BUFFER_SIZE_ORDER) - -#define ACSI_TIMEOUT (4*HZ) - -/* minimum delay between two commands */ - -#define COMMAND_DELAY 500 - -typedef enum { - NONE, HARDDISK, CDROM -} ACSI_TYPE; - -struct acsi_info_struct { - ACSI_TYPE type; /* type of device */ - unsigned target; /* target number */ - unsigned lun; /* LUN in target controller */ - unsigned removable : 1; /* Flag for removable media */ - unsigned read_only : 1; /* Flag for read only devices */ - unsigned old_atari_disk : 1; /* Is an old Atari disk */ - unsigned changed : 1; /* Medium has been changed */ - unsigned long size; /* #blocks */ - int access_count; -} acsi_info[MAX_DEV]; - -/* - * SENSE KEYS - */ - -#define NO_SENSE 0x00 -#define RECOVERED_ERROR 0x01 -#define NOT_READY 0x02 -#define MEDIUM_ERROR 0x03 -#define HARDWARE_ERROR 0x04 -#define ILLEGAL_REQUEST 0x05 -#define UNIT_ATTENTION 0x06 -#define DATA_PROTECT 0x07 -#define BLANK_CHECK 0x08 -#define COPY_ABORTED 0x0a -#define ABORTED_COMMAND 0x0b -#define VOLUME_OVERFLOW 0x0d -#define MISCOMPARE 0x0e - - -/* - * DEVICE TYPES - */ - -#define TYPE_DISK 0x00 -#define TYPE_TAPE 0x01 -#define TYPE_WORM 0x04 -#define TYPE_ROM 0x05 -#define TYPE_MOD 0x07 -#define TYPE_NO_LUN 0x7f - -/* The data returned by MODE SENSE differ between the old Atari - * hard disks and SCSI disks connected to ACSI. In the following, both - * formats are defined and some macros to operate on them potably. - */ - -typedef struct { - unsigned long dummy[2]; - unsigned long sector_size; - unsigned char format_code; -#define ATARI_SENSE_FORMAT_FIX 1 -#define ATARI_SENSE_FORMAT_CHNG 2 - unsigned char cylinders_h; - unsigned char cylinders_l; - unsigned char heads; - unsigned char reduced_h; - unsigned char reduced_l; - unsigned char precomp_h; - unsigned char precomp_l; - unsigned char landing_zone; - unsigned char steprate; - unsigned char type; -#define ATARI_SENSE_TYPE_FIXCHNG_MASK 4 -#define ATARI_SENSE_TYPE_SOFTHARD_MASK 8 -#define ATARI_SENSE_TYPE_FIX 4 -#define ATARI_SENSE_TYPE_CHNG 0 -#define ATARI_SENSE_TYPE_SOFT 0 -#define ATARI_SENSE_TYPE_HARD 8 - unsigned char sectors; -} ATARI_SENSE_DATA; - -#define ATARI_CAPACITY(sd) \ - (((int)((sd).cylinders_h<<8)|(sd).cylinders_l) * \ - (sd).heads * (sd).sectors) - - -typedef struct { - unsigned char dummy1; - unsigned char medium_type; - unsigned char dummy2; - unsigned char descriptor_size; - unsigned long block_count; - unsigned long sector_size; - /* Page 0 data */ - unsigned char page_code; - unsigned char page_size; - unsigned char page_flags; - unsigned char qualifier; -} SCSI_SENSE_DATA; - -#define SCSI_CAPACITY(sd) ((sd).block_count & 0xffffff) - - -typedef union { - ATARI_SENSE_DATA atari; - SCSI_SENSE_DATA scsi; -} SENSE_DATA; - -#define SENSE_TYPE_UNKNOWN 0 -#define SENSE_TYPE_ATARI 1 -#define SENSE_TYPE_SCSI 2 - -#define SENSE_TYPE(sd) \ - (((sd).atari.dummy[0] == 8 && \ - ((sd).atari.format_code == 1 || \ - (sd).atari.format_code == 2)) ? SENSE_TYPE_ATARI : \ - ((sd).scsi.dummy1 >= 11) ? SENSE_TYPE_SCSI : \ - SENSE_TYPE_UNKNOWN) - -#define CAPACITY(sd) \ - (SENSE_TYPE(sd) == SENSE_TYPE_ATARI ? \ - ATARI_CAPACITY((sd).atari) : \ - SCSI_CAPACITY((sd).scsi)) - -#define SECTOR_SIZE(sd) \ - (SENSE_TYPE(sd) == SENSE_TYPE_ATARI ? \ - (sd).atari.sector_size : \ - (sd).scsi.sector_size & 0xffffff) - -/* Default size if capacity cannot be determined (1 GByte) */ -#define DEFAULT_SIZE 0x1fffff - -#define CARTRCH_STAT(aip,buf) \ - (aip->old_atari_disk ? \ - (((buf)[0] & 0x7f) == 0x28) : \ - ((((buf)[0] & 0x70) == 0x70) ? \ - (((buf)[2] & 0x0f) == 0x06) : \ - (((buf)[0] & 0x0f) == 0x06))) \ - -/* These two are also exported to other drivers that work on the ACSI bus and - * need an ST-RAM buffer. */ -char *acsi_buffer; -unsigned long phys_acsi_buffer; - -static int NDevices; - -static int CurrentNReq; -static int CurrentNSect; -static char *CurrentBuffer; - -static DEFINE_SPINLOCK(acsi_lock); - - -#define SET_TIMER() mod_timer(&acsi_timer, jiffies + ACSI_TIMEOUT) -#define CLEAR_TIMER() del_timer(&acsi_timer) - -static unsigned long STramMask; -#define STRAM_ADDR(a) (((a) & STramMask) == 0) - - - -/* ACSI commands */ - -static char tur_cmd[6] = { 0x00, 0, 0, 0, 0, 0 }; -static char modesense_cmd[6] = { 0x1a, 0, 0, 0, 24, 0 }; -static char modeselect_cmd[6] = { 0x15, 0, 0, 0, 12, 0 }; -static char inquiry_cmd[6] = { 0x12, 0, 0, 0,255, 0 }; -static char reqsense_cmd[6] = { 0x03, 0, 0, 0, 4, 0 }; -static char read_cmd[6] = { 0x08, 0, 0, 0, 0, 0 }; -static char write_cmd[6] = { 0x0a, 0, 0, 0, 0, 0 }; -static char pa_med_rem_cmd[6] = { 0x1e, 0, 0, 0, 0, 0 }; - -#define CMDSET_TARG_LUN(cmd,targ,lun) \ - do { \ - cmd[0] = (cmd[0] & ~0xe0) | (targ)<<5; \ - cmd[1] = (cmd[1] & ~0xe0) | (lun)<<5; \ - } while(0) - -#define CMDSET_BLOCK(cmd,blk) \ - do { \ - unsigned long __blk = (blk); \ - cmd[3] = __blk; __blk >>= 8; \ - cmd[2] = __blk; __blk >>= 8; \ - cmd[1] = (cmd[1] & 0xe0) | (__blk & 0x1f); \ - } while(0) - -#define CMDSET_LEN(cmd,len) \ - do { \ - cmd[4] = (len); \ - } while(0) - -/* ACSI errors (from REQUEST SENSE); There are two tables, one for the - * old Atari disks and one for SCSI on ACSI disks. - */ - -struct acsi_error { - unsigned char code; - const char *text; -} atari_acsi_errors[] = { - { 0x00, "No error (??)" }, - { 0x01, "No index pulses" }, - { 0x02, "Seek not complete" }, - { 0x03, "Write fault" }, - { 0x04, "Drive not ready" }, - { 0x06, "No Track 00 signal" }, - { 0x10, "ECC error in ID field" }, - { 0x11, "Uncorrectable data error" }, - { 0x12, "ID field address mark not found" }, - { 0x13, "Data field address mark not found" }, - { 0x14, "Record not found" }, - { 0x15, "Seek error" }, - { 0x18, "Data check in no retry mode" }, - { 0x19, "ECC error during verify" }, - { 0x1a, "Access to bad block" }, - { 0x1c, "Unformatted or bad format" }, - { 0x20, "Invalid command" }, - { 0x21, "Invalid block address" }, - { 0x23, "Volume overflow" }, - { 0x24, "Invalid argument" }, - { 0x25, "Invalid drive number" }, - { 0x26, "Byte zero parity check" }, - { 0x28, "Cartride changed" }, - { 0x2c, "Error count overflow" }, - { 0x30, "Controller selftest failed" } -}, - - scsi_acsi_errors[] = { - { 0x00, "No error (??)" }, - { 0x01, "Recovered error" }, - { 0x02, "Drive not ready" }, - { 0x03, "Uncorrectable medium error" }, - { 0x04, "Hardware error" }, - { 0x05, "Illegal request" }, - { 0x06, "Unit attention (Reset or cartridge changed)" }, - { 0x07, "Data protection" }, - { 0x08, "Blank check" }, - { 0x0b, "Aborted Command" }, - { 0x0d, "Volume overflow" } -}; - - - -/***************************** Prototypes *****************************/ - -static int acsicmd_dma( const char *cmd, char *buffer, int blocks, int - rwflag, int enable); -static int acsi_reqsense( char *buffer, int targ, int lun); -static void acsi_print_error(const unsigned char *errblk, struct acsi_info_struct *aip); -static irqreturn_t acsi_interrupt (int irq, void *data); -static void unexpected_acsi_interrupt( void ); -static void bad_rw_intr( void ); -static void read_intr( void ); -static void write_intr( void); -static void acsi_times_out( unsigned long dummy ); -static void copy_to_acsibuffer( void ); -static void copy_from_acsibuffer( void ); -static void do_end_requests( void ); -static void do_acsi_request( request_queue_t * ); -static void redo_acsi_request( void ); -static int acsi_ioctl( struct inode *inode, struct file *file, unsigned int - cmd, unsigned long arg ); -static int acsi_open( struct inode * inode, struct file * filp ); -static int acsi_release( struct inode * inode, struct file * file ); -static void acsi_prevent_removal(struct acsi_info_struct *aip, int flag ); -static int acsi_change_blk_size( int target, int lun); -static int acsi_mode_sense( int target, int lun, SENSE_DATA *sd ); -static int acsi_revalidate (struct gendisk *disk); - -/************************* End of Prototypes **************************/ - - -DEFINE_TIMER(acsi_timer, acsi_times_out, 0, 0); - - -#ifdef CONFIG_ATARI_SLM - -extern int attach_slm( int target, int lun ); -extern int slm_init( void ); - -#endif - - - -/*********************************************************************** - * - * ACSI primitives - * - **********************************************************************/ - - -/* - * The following two functions wait for _IRQ to become Low or High, - * resp., with a timeout. The 'timeout' parameter is in jiffies - * (10ms). - * If the functions are called with timer interrupts on (int level < - * 6), the timeout is based on the 'jiffies' variable to provide exact - * timeouts for device probing etc. - * If interrupts are disabled, the number of tries is based on the - * 'loops_per_jiffy' variable. A rough estimation is sufficient here... - */ - -#define INT_LEVEL \ - ({ unsigned __sr; \ - __asm__ __volatile__ ( "movew %/sr,%0" : "=dm" (__sr) ); \ - (__sr >> 8) & 7; \ - }) - -int acsi_wait_for_IRQ( unsigned timeout ) - -{ - if (INT_LEVEL < 6) { - unsigned long maxjif = jiffies + timeout; - while (time_before(jiffies, maxjif)) - if (!(mfp.par_dt_reg & 0x20)) return( 1 ); - } - else { - long tries = loops_per_jiffy / 8 * timeout; - while( --tries >= 0 ) - if (!(mfp.par_dt_reg & 0x20)) return( 1 ); - } - return( 0 ); /* timeout! */ -} - - -int acsi_wait_for_noIRQ( unsigned timeout ) - -{ - if (INT_LEVEL < 6) { - unsigned long maxjif = jiffies + timeout; - while (time_before(jiffies, maxjif)) - if (mfp.par_dt_reg & 0x20) return( 1 ); - } - else { - long tries = loops_per_jiffy * timeout / 8; - while( tries-- >= 0 ) - if (mfp.par_dt_reg & 0x20) return( 1 ); - } - return( 0 ); /* timeout! */ -} - -static struct timeval start_time; - -void -acsi_delay_start(void) -{ - do_gettimeofday(&start_time); -} - -/* wait from acsi_delay_start to now usec (<1E6) usec */ - -void -acsi_delay_end(long usec) -{ - struct timeval end_time; - long deltau,deltas; - do_gettimeofday(&end_time); - deltau=end_time.tv_usec - start_time.tv_usec; - deltas=end_time.tv_sec - start_time.tv_sec; - if (deltas > 1 || deltas < 0) - return; - if (deltas > 0) - deltau += 1000*1000; - if (deltau >= usec) - return; - udelay(usec-deltau); -} - -/* acsicmd_dma() sends an ACSI command and sets up the DMA to transfer - * 'blocks' blocks of 512 bytes from/to 'buffer'. - * Because the _IRQ signal is used for handshaking the command bytes, - * the ACSI interrupt has to be disabled in this function. If the end - * of the operation should be signalled by a real interrupt, it has to be - * reenabled afterwards. - */ - -static int acsicmd_dma( const char *cmd, char *buffer, int blocks, int rwflag, int enable) - -{ unsigned long flags, paddr; - int i; - -#ifdef NO_WRITE - if (rwflag || *cmd == 0x0a) { - printk( "ACSI: Write commands disabled!\n" ); - return( 0 ); - } -#endif - - rwflag = rwflag ? 0x100 : 0; - paddr = virt_to_phys( buffer ); - - acsi_delay_end(COMMAND_DELAY); - DISABLE_IRQ(); - - local_irq_save(flags); - /* Low on A1 */ - dma_wd.dma_mode_status = 0x88 | rwflag; - MFPDELAY(); - - /* set DMA address */ - dma_wd.dma_lo = (unsigned char)paddr; - paddr >>= 8; - MFPDELAY(); - dma_wd.dma_md = (unsigned char)paddr; - paddr >>= 8; - MFPDELAY(); - if (ATARIHW_PRESENT(EXTD_DMA)) - st_dma_ext_dmahi = (unsigned short)paddr; - else - dma_wd.dma_hi = (unsigned char)paddr; - MFPDELAY(); - local_irq_restore(flags); - - /* send the command bytes except the last */ - for( i = 0; i < 5; ++i ) { - DMA_LONG_WRITE( *cmd++, 0x8a | rwflag ); - udelay(20); - if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */ - } - - /* Clear FIFO and switch DMA to correct direction */ - dma_wd.dma_mode_status = 0x92 | (rwflag ^ 0x100); - MFPDELAY(); - dma_wd.dma_mode_status = 0x92 | rwflag; - MFPDELAY(); - - /* How many sectors for DMA */ - dma_wd.fdc_acces_seccount = blocks; - MFPDELAY(); - - /* send last command byte */ - dma_wd.dma_mode_status = 0x8a | rwflag; - MFPDELAY(); - DMA_LONG_WRITE( *cmd++, 0x0a | rwflag ); - if (enable) - ENABLE_IRQ(); - udelay(80); - - return( 1 ); -} - - -/* - * acsicmd_nodma() sends an ACSI command that requires no DMA. - */ - -int acsicmd_nodma( const char *cmd, int enable) - -{ int i; - - acsi_delay_end(COMMAND_DELAY); - DISABLE_IRQ(); - - /* send first command byte */ - dma_wd.dma_mode_status = 0x88; - MFPDELAY(); - DMA_LONG_WRITE( *cmd++, 0x8a ); - udelay(20); - if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */ - - /* send the intermediate command bytes */ - for( i = 0; i < 4; ++i ) { - DMA_LONG_WRITE( *cmd++, 0x8a ); - udelay(20); - if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */ - } - - /* send last command byte */ - DMA_LONG_WRITE( *cmd++, 0x0a ); - if (enable) - ENABLE_IRQ(); - udelay(80); - - return( 1 ); - /* Note that the ACSI interrupt is still disabled after this - * function. If you want to get the IRQ delivered, enable it manually! - */ -} - - -static int acsi_reqsense( char *buffer, int targ, int lun) - -{ - CMDSET_TARG_LUN( reqsense_cmd, targ, lun); - if (!acsicmd_dma( reqsense_cmd, buffer, 1, 0, 0 )) return( 0 ); - if (!acsi_wait_for_IRQ( 10 )) return( 0 ); - acsi_getstatus(); - if (!acsicmd_nodma( reqsense_cmd, 0 )) return( 0 ); - if (!acsi_wait_for_IRQ( 10 )) return( 0 ); - acsi_getstatus(); - if (!acsicmd_nodma( reqsense_cmd, 0 )) return( 0 ); - if (!acsi_wait_for_IRQ( 10 )) return( 0 ); - acsi_getstatus(); - if (!acsicmd_nodma( reqsense_cmd, 0 )) return( 0 ); - if (!acsi_wait_for_IRQ( 10 )) return( 0 ); - acsi_getstatus(); - dma_cache_maintenance( virt_to_phys(buffer), 16, 0 ); - - return( 1 ); -} - - -/* - * ACSI status phase: get the status byte from the bus - * - * I've seen several times that a 0xff status is read, propably due to - * a timing error. In this case, the procedure is repeated after the - * next _IRQ edge. - */ - -int acsi_getstatus( void ) - -{ int status; - - DISABLE_IRQ(); - for(;;) { - if (!acsi_wait_for_IRQ( 100 )) { - acsi_delay_start(); - return( -1 ); - } - dma_wd.dma_mode_status = 0x8a; - MFPDELAY(); - status = dma_wd.fdc_acces_seccount; - if (status != 0xff) break; -#ifdef DEBUG - printk("ACSI: skipping 0xff status byte\n" ); -#endif - udelay(40); - acsi_wait_for_noIRQ( 20 ); - } - dma_wd.dma_mode_status = 0x80; - udelay(40); - acsi_wait_for_noIRQ( 20 ); - - acsi_delay_start(); - return( status & 0x1f ); /* mask of the device# */ -} - - -#if (defined(CONFIG_ATARI_SLM) || defined(CONFIG_ATARI_SLM_MODULE)) - -/* Receive data in an extended status phase. Needed by SLM printer. */ - -int acsi_extstatus( char *buffer, int cnt ) - -{ int status; - - DISABLE_IRQ(); - udelay(80); - while( cnt-- > 0 ) { - if (!acsi_wait_for_IRQ( 40 )) return( 0 ); - dma_wd.dma_mode_status = 0x8a; - MFPDELAY(); - status = dma_wd.fdc_acces_seccount; - MFPDELAY(); - *buffer++ = status & 0xff; - udelay(40); - } - return( 1 ); -} - - -/* Finish an extended status phase */ - -void acsi_end_extstatus( void ) - -{ - dma_wd.dma_mode_status = 0x80; - udelay(40); - acsi_wait_for_noIRQ( 20 ); - acsi_delay_start(); -} - - -/* Send data in an extended command phase */ - -int acsi_extcmd( unsigned char *buffer, int cnt ) - -{ - while( cnt-- > 0 ) { - DMA_LONG_WRITE( *buffer++, 0x8a ); - udelay(20); - if (!acsi_wait_for_IRQ( HZ/2 )) return( 0 ); /* timeout */ - } - return( 1 ); -} - -#endif - - -static void acsi_print_error(const unsigned char *errblk, struct acsi_info_struct *aip) - -{ int atari_err, i, errcode; - struct acsi_error *arr; - - atari_err = aip->old_atari_disk; - if (atari_err) - errcode = errblk[0] & 0x7f; - else - if ((errblk[0] & 0x70) == 0x70) - errcode = errblk[2] & 0x0f; - else - errcode = errblk[0] & 0x0f; - - printk( KERN_ERR "ACSI error 0x%02x", errcode ); - - if (errblk[0] & 0x80) - printk( " for sector %d", - ((errblk[1] & 0x1f) << 16) | - (errblk[2] << 8) | errblk[0] ); - - arr = atari_err ? atari_acsi_errors : scsi_acsi_errors; - i = atari_err ? sizeof(atari_acsi_errors)/sizeof(*atari_acsi_errors) : - sizeof(scsi_acsi_errors)/sizeof(*scsi_acsi_errors); - - for( --i; i >= 0; --i ) - if (arr[i].code == errcode) break; - if (i >= 0) - printk( ": %s\n", arr[i].text ); -} - -/******************************************************************* - * - * ACSI interrupt routine - * Test, if this is a ACSI interrupt and call the irq handler - * Otherwise ignore this interrupt. - * - *******************************************************************/ - -static irqreturn_t acsi_interrupt(int irq, void *data ) - -{ void (*acsi_irq_handler)(void) = do_acsi; - - do_acsi = NULL; - CLEAR_TIMER(); - - if (!acsi_irq_handler) - acsi_irq_handler = unexpected_acsi_interrupt; - acsi_irq_handler(); - return IRQ_HANDLED; -} - - -/****************************************************************** - * - * The Interrupt handlers - * - *******************************************************************/ - - -static void unexpected_acsi_interrupt( void ) - -{ - printk( KERN_WARNING "Unexpected ACSI interrupt\n" ); -} - - -/* This function is called in case of errors. Because we cannot reset - * the ACSI bus or a single device, there is no other choice than - * retrying several times :-( - */ - -static void bad_rw_intr( void ) - -{ - if (!CURRENT) - return; - - if (++CURRENT->errors >= MAX_ERRORS) - end_request(CURRENT, 0); - /* Otherwise just retry */ -} - - -static void read_intr( void ) - -{ int status; - - status = acsi_getstatus(); - if (status != 0) { - struct gendisk *disk = CURRENT->rq_disk; - struct acsi_info_struct *aip = disk->private_data; - printk(KERN_ERR "%s: ", disk->disk_name); - if (!acsi_reqsense(acsi_buffer, aip->target, aip->lun)) - printk( "ACSI error and REQUEST SENSE failed (status=0x%02x)\n", status ); - else { - acsi_print_error(acsi_buffer, aip); - if (CARTRCH_STAT(aip, acsi_buffer)) - aip->changed = 1; - } - ENABLE_IRQ(); - bad_rw_intr(); - redo_acsi_request(); - return; - } - - dma_cache_maintenance( virt_to_phys(CurrentBuffer), CurrentNSect*512, 0 ); - if (CurrentBuffer == acsi_buffer) - copy_from_acsibuffer(); - - do_end_requests(); - redo_acsi_request(); -} - - -static void write_intr(void) - -{ int status; - - status = acsi_getstatus(); - if (status != 0) { - struct gendisk *disk = CURRENT->rq_disk; - struct acsi_info_struct *aip = disk->private_data; - printk( KERN_ERR "%s: ", disk->disk_name); - if (!acsi_reqsense( acsi_buffer, aip->target, aip->lun)) - printk( "ACSI error and REQUEST SENSE failed (status=0x%02x)\n", status ); - else { - acsi_print_error(acsi_buffer, aip); - if (CARTRCH_STAT(aip, acsi_buffer)) - aip->changed = 1; - } - bad_rw_intr(); - redo_acsi_request(); - return; - } - - do_end_requests(); - redo_acsi_request(); -} - - -static void acsi_times_out( unsigned long dummy ) - -{ - DISABLE_IRQ(); - if (!do_acsi) return; - - do_acsi = NULL; - printk( KERN_ERR "ACSI timeout\n" ); - if (!CURRENT) - return; - if (++CURRENT->errors >= MAX_ERRORS) { -#ifdef DEBUG - printk( KERN_ERR "ACSI: too many errors.\n" ); -#endif - end_request(CURRENT, 0); - } - - redo_acsi_request(); -} - - - -/*********************************************************************** - * - * Scatter-gather utility functions - * - ***********************************************************************/ - - -static void copy_to_acsibuffer( void ) - -{ int i; - char *src, *dst; - struct buffer_head *bh; - - src = CURRENT->buffer; - dst = acsi_buffer; - bh = CURRENT->bh; - - if (!bh) - memcpy( dst, src, CurrentNSect*512 ); - else - for( i = 0; i < CurrentNReq; ++i ) { - memcpy( dst, src, bh->b_size ); - dst += bh->b_size; - if ((bh = bh->b_reqnext)) - src = bh->b_data; - } -} - - -static void copy_from_acsibuffer( void ) - -{ int i; - char *src, *dst; - struct buffer_head *bh; - - dst = CURRENT->buffer; - src = acsi_buffer; - bh = CURRENT->bh; - - if (!bh) - memcpy( dst, src, CurrentNSect*512 ); - else - for( i = 0; i < CurrentNReq; ++i ) { - memcpy( dst, src, bh->b_size ); - src += bh->b_size; - if ((bh = bh->b_reqnext)) - dst = bh->b_data; - } -} - - -static void do_end_requests( void ) - -{ int i, n; - - if (!CURRENT->bh) { - CURRENT->nr_sectors -= CurrentNSect; - CURRENT->current_nr_sectors -= CurrentNSect; - CURRENT->sector += CurrentNSect; - if (CURRENT->nr_sectors == 0) - end_request(CURRENT, 1); - } - else { - for( i = 0; i < CurrentNReq; ++i ) { - n = CURRENT->bh->b_size >> 9; - CURRENT->nr_sectors -= n; - CURRENT->current_nr_sectors -= n; - CURRENT->sector += n; - end_request(CURRENT, 1); - } - } -} - - - - -/*********************************************************************** - * - * do_acsi_request and friends - * - ***********************************************************************/ - -static void do_acsi_request( request_queue_t * q ) - -{ - stdma_lock( acsi_interrupt, NULL ); - redo_acsi_request(); -} - - -static void redo_acsi_request( void ) -{ - unsigned block, target, lun, nsect; - char *buffer; - unsigned long pbuffer; - struct buffer_head *bh; - struct gendisk *disk; - struct acsi_info_struct *aip; - - repeat: - CLEAR_TIMER(); - - if (do_acsi) - return; - - if (!CURRENT) { - do_acsi = NULL; - ENABLE_IRQ(); - stdma_release(); - return; - } - - disk = CURRENT->rq_disk; - aip = disk->private_data; - if (CURRENT->bh) { - if (!CURRENT->bh && !buffer_locked(CURRENT->bh)) - panic("ACSI: block not locked"); - } - - block = CURRENT->sector; - if (block+CURRENT->nr_sectors >= get_capacity(disk)) { -#ifdef DEBUG - printk( "%s: attempted access for blocks %d...%ld past end of device at block %ld.\n", - disk->disk_name, - block, block + CURRENT->nr_sectors - 1, - get_capacity(disk)); -#endif - end_request(CURRENT, 0); - goto repeat; - } - if (aip->changed) { - printk( KERN_NOTICE "%s: request denied because cartridge has " - "been changed.\n", disk->disk_name); - end_request(CURRENT, 0); - goto repeat; - } - - target = aip->target; - lun = aip->lun; - - /* Find out how many sectors should be transferred from/to - * consecutive buffers and thus can be done with a single command. - */ - buffer = CURRENT->buffer; - pbuffer = virt_to_phys(buffer); - nsect = CURRENT->current_nr_sectors; - CurrentNReq = 1; - - if ((bh = CURRENT->bh) && bh != CURRENT->bhtail) { - if (!STRAM_ADDR(pbuffer)) { - /* If transfer is done via the ACSI buffer anyway, we can - * assemble as much bh's as fit in the buffer. - */ - while( (bh = bh->b_reqnext) ) { - if (nsect + (bh->b_size>>9) > ACSI_BUFFER_SECTORS) break; - nsect += bh->b_size >> 9; - ++CurrentNReq; - if (bh == CURRENT->bhtail) break; - } - buffer = acsi_buffer; - pbuffer = phys_acsi_buffer; - } - else { - unsigned long pendadr, pnewadr; - pendadr = pbuffer + nsect*512; - while( (bh = bh->b_reqnext) ) { - pnewadr = virt_to_phys(bh->b_data); - if (!STRAM_ADDR(pnewadr) || pendadr != pnewadr) break; - nsect += bh->b_size >> 9; - pendadr = pnewadr + bh->b_size; - ++CurrentNReq; - if (bh == CURRENT->bhtail) break; - } - } - } - else { - if (!STRAM_ADDR(pbuffer)) { - buffer = acsi_buffer; - pbuffer = phys_acsi_buffer; - if (nsect > ACSI_BUFFER_SECTORS) - nsect = ACSI_BUFFER_SECTORS; - } - } - CurrentBuffer = buffer; - CurrentNSect = nsect; - - if (rq_data_dir(CURRENT) == WRITE) { - CMDSET_TARG_LUN( write_cmd, target, lun ); - CMDSET_BLOCK( write_cmd, block ); - CMDSET_LEN( write_cmd, nsect ); - if (buffer == acsi_buffer) - copy_to_acsibuffer(); - dma_cache_maintenance( pbuffer, nsect*512, 1 ); - do_acsi = write_intr; - if (!acsicmd_dma( write_cmd, buffer, nsect, 1, 1)) { - do_acsi = NULL; - printk( KERN_ERR "ACSI (write): Timeout in command block\n" ); - bad_rw_intr(); - goto repeat; - } - SET_TIMER(); - return; - } - if (rq_data_dir(CURRENT) == READ) { - CMDSET_TARG_LUN( read_cmd, target, lun ); - CMDSET_BLOCK( read_cmd, block ); - CMDSET_LEN( read_cmd, nsect ); - do_acsi = read_intr; - if (!acsicmd_dma( read_cmd, buffer, nsect, 0, 1)) { - do_acsi = NULL; - printk( KERN_ERR "ACSI (read): Timeout in command block\n" ); - bad_rw_intr(); - goto repeat; - } - SET_TIMER(); - return; - } - panic("unknown ACSI command"); -} - - - -/*********************************************************************** - * - * Misc functions: ioctl, open, release, check_change, ... - * - ***********************************************************************/ - -static int acsi_getgeo(struct block_device *bdev, struct hd_geometry *geo) -{ - struct acsi_info_struct *aip = bdev->bd_disk->private_data; - - /* - * Just fake some geometry here, it's nonsense anyway - * To make it easy, use Adaptec's usual 64/32 mapping - */ - geo->heads = 64; - geo->sectors = 32; - geo->cylinders = aip->size >> 11; - return 0; -} - -static int acsi_ioctl( struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg ) -{ - struct gendisk *disk = inode->i_bdev->bd_disk; - struct acsi_info_struct *aip = disk->private_data; - switch (cmd) { - case SCSI_IOCTL_GET_IDLUN: - /* SCSI compatible GET_IDLUN call to get target's ID and LUN number */ - put_user( aip->target | (aip->lun << 8), - &((Scsi_Idlun *) arg)->dev_id ); - put_user( 0, &((Scsi_Idlun *) arg)->host_unique_id ); - return 0; - default: - return -EINVAL; - } -} - - -/* - * Open a device, check for read-only and lock the medium if it is - * removable. - * - * Changes by Martin Rogge, 9th Aug 1995: - * Check whether check_disk_change (and therefore revalidate_acsidisk) - * was successful. They fail when there is no medium in the drive. - * - * The problem of media being changed during an operation can be - * ignored because of the prevent_removal code. - * - * Added check for the validity of the device number. - * - */ - -static int acsi_open( struct inode * inode, struct file * filp ) -{ - struct gendisk *disk = inode->i_bdev->bd_disk; - struct acsi_info_struct *aip = disk->private_data; - - if (aip->access_count == 0 && aip->removable) { -#if 0 - aip->changed = 1; /* safety first */ -#endif - check_disk_change( inode->i_bdev ); - if (aip->changed) /* revalidate was not successful (no medium) */ - return -ENXIO; - acsi_prevent_removal(aip, 1); - } - aip->access_count++; - - if (filp && filp->f_mode) { - check_disk_change( inode->i_bdev ); - if (filp->f_mode & 2) { - if (aip->read_only) { - acsi_release( inode, filp ); - return -EROFS; - } - } - } - - return 0; -} - -/* - * Releasing a block device means we sync() it, so that it can safely - * be forgotten about... - */ - -static int acsi_release( struct inode * inode, struct file * file ) -{ - struct gendisk *disk = inode->i_bdev->bd_disk; - struct acsi_info_struct *aip = disk->private_data; - if (--aip->access_count == 0 && aip->removable) - acsi_prevent_removal(aip, 0); - return( 0 ); -} - -/* - * Prevent or allow a media change for removable devices. - */ - -static void acsi_prevent_removal(struct acsi_info_struct *aip, int flag) -{ - stdma_lock( NULL, NULL ); - - CMDSET_TARG_LUN(pa_med_rem_cmd, aip->target, aip->lun); - CMDSET_LEN( pa_med_rem_cmd, flag ); - - if (acsicmd_nodma(pa_med_rem_cmd, 0) && acsi_wait_for_IRQ(3*HZ)) - acsi_getstatus(); - /* Do not report errors -- some devices may not know this command. */ - - ENABLE_IRQ(); - stdma_release(); -} - -static int acsi_media_change(struct gendisk *disk) -{ - struct acsi_info_struct *aip = disk->private_data; - - if (!aip->removable) - return 0; - - if (aip->changed) - /* We can be sure that the medium has been changed -- REQUEST - * SENSE has reported this earlier. - */ - return 1; - - /* If the flag isn't set, make a test by reading block 0. - * If errors happen, it seems to be better to say "changed"... - */ - stdma_lock( NULL, NULL ); - CMDSET_TARG_LUN(read_cmd, aip->target, aip->lun); - CMDSET_BLOCK( read_cmd, 0 ); - CMDSET_LEN( read_cmd, 1 ); - if (acsicmd_dma(read_cmd, acsi_buffer, 1, 0, 0) && - acsi_wait_for_IRQ(3*HZ)) { - if (acsi_getstatus()) { - if (acsi_reqsense(acsi_buffer, aip->target, aip->lun)) { - if (CARTRCH_STAT(aip, acsi_buffer)) - aip->changed = 1; - } - else { - printk( KERN_ERR "%s: REQUEST SENSE failed in test for " - "medium change; assuming a change\n", disk->disk_name ); - aip->changed = 1; - } - } - } - else { - printk( KERN_ERR "%s: Test for medium changed timed out; " - "assuming a change\n", disk->disk_name); - aip->changed = 1; - } - ENABLE_IRQ(); - stdma_release(); - - /* Now, after reading a block, the changed status is surely valid. */ - return aip->changed; -} - - -static int acsi_change_blk_size( int target, int lun) - -{ int i; - - for (i=0; i<12; i++) - acsi_buffer[i] = 0; - - acsi_buffer[3] = 8; - acsi_buffer[10] = 2; - CMDSET_TARG_LUN( modeselect_cmd, target, lun); - - if (!acsicmd_dma( modeselect_cmd, acsi_buffer, 1,1,0) || - !acsi_wait_for_IRQ( 3*HZ ) || - acsi_getstatus() != 0 ) { - return(0); - } - return(1); -} - - -static int acsi_mode_sense( int target, int lun, SENSE_DATA *sd ) - -{ - int page; - - CMDSET_TARG_LUN( modesense_cmd, target, lun ); - for (page=0; page<4; page++) { - modesense_cmd[2] = page; - if (!acsicmd_dma( modesense_cmd, acsi_buffer, 1, 0, 0 ) || - !acsi_wait_for_IRQ( 3*HZ ) || - acsi_getstatus()) - continue; - - /* read twice to jump over the second 16-byte border! */ - udelay(300); - if (acsi_wait_for_noIRQ( 20 ) && - acsicmd_nodma( modesense_cmd, 0 ) && - acsi_wait_for_IRQ( 3*HZ ) && - acsi_getstatus() == 0) - break; - } - if (page == 4) { - return(0); - } - - dma_cache_maintenance( phys_acsi_buffer, sizeof(SENSE_DATA), 0 ); - *sd = *(SENSE_DATA *)acsi_buffer; - - /* Validity check, depending on type of data */ - - switch( SENSE_TYPE(*sd) ) { - - case SENSE_TYPE_ATARI: - if (CAPACITY(*sd) == 0) - goto invalid_sense; - break; - - case SENSE_TYPE_SCSI: - if (sd->scsi.descriptor_size != 8) - goto invalid_sense; - break; - - case SENSE_TYPE_UNKNOWN: - - printk( KERN_ERR "ACSI target %d, lun %d: Cannot interpret " - "sense data\n", target, lun ); - - invalid_sense: - -#ifdef DEBUG - { int i; - printk( "Mode sense data for ACSI target %d, lun %d seem not valid:", - target, lun ); - for( i = 0; i < sizeof(SENSE_DATA); ++i ) - printk( "%02x ", (unsigned char)acsi_buffer[i] ); - printk( "\n" ); - } -#endif - return( 0 ); - } - - return( 1 ); -} - - - -/******************************************************************* - * - * Initialization - * - ********************************************************************/ - - -extern struct block_device_operations acsi_fops; - -static struct gendisk *acsi_gendisk[MAX_DEV]; - -#define MAX_SCSI_DEVICE_CODE 10 - -static const char *const scsi_device_types[MAX_SCSI_DEVICE_CODE] = -{ - "Direct-Access ", - "Sequential-Access", - "Printer ", - "Processor ", - "WORM ", - "CD-ROM ", - "Scanner ", - "Optical Device ", - "Medium Changer ", - "Communications " -}; - -static void print_inquiry(unsigned char *data) -{ - int i; - - printk(KERN_INFO " Vendor: "); - for (i = 8; i < 16; i++) - { - if (data[i] >= 0x20 && i < data[4] + 5) - printk("%c", data[i]); - else - printk(" "); - } - - printk(" Model: "); - for (i = 16; i < 32; i++) - { - if (data[i] >= 0x20 && i < data[4] + 5) - printk("%c", data[i]); - else - printk(" "); - } - - printk(" Rev: "); - for (i = 32; i < 36; i++) - { - if (data[i] >= 0x20 && i < data[4] + 5) - printk("%c", data[i]); - else - printk(" "); - } - - printk("\n"); - - i = data[0] & 0x1f; - - printk(KERN_INFO " Type: %s ", (i < MAX_SCSI_DEVICE_CODE - ? scsi_device_types[i] - : "Unknown ")); - printk(" ANSI SCSI revision: %02x", data[2] & 0x07); - if ((data[2] & 0x07) == 1 && (data[3] & 0x0f) == 1) - printk(" CCS\n"); - else - printk("\n"); -} - - -/* - * Changes by Martin Rogge, 9th Aug 1995: - * acsi_devinit has been taken out of acsi_geninit, because it needs - * to be called from revalidate_acsidisk. The result of request sense - * is now checked for DRIVE NOT READY. - * - * The structure *aip is only valid when acsi_devinit returns - * DEV_SUPPORTED. - * - */ - -#define DEV_NONE 0 -#define DEV_UNKNOWN 1 -#define DEV_SUPPORTED 2 -#define DEV_SLM 3 - -static int acsi_devinit(struct acsi_info_struct *aip) -{ - int status, got_inquiry; - SENSE_DATA sense; - unsigned char reqsense, extsense; - - /*****************************************************************/ - /* Do a TEST UNIT READY command to test the presence of a device */ - /*****************************************************************/ - - CMDSET_TARG_LUN(tur_cmd, aip->target, aip->lun); - if (!acsicmd_nodma(tur_cmd, 0)) { - /* timed out -> no device here */ -#ifdef DEBUG_DETECT - printk("target %d lun %d: timeout\n", aip->target, aip->lun); -#endif - return DEV_NONE; - } - - /*************************/ - /* Read the ACSI status. */ - /*************************/ - - status = acsi_getstatus(); - if (status) { - if (status == 0x12) { - /* The SLM printer should be the only device that - * responds with the error code in the status byte. In - * correct status bytes, bit 4 is never set. - */ - printk( KERN_INFO "Detected SLM printer at id %d lun %d\n", - aip->target, aip->lun); - return DEV_SLM; - } - /* ignore CHECK CONDITION, since some devices send a - UNIT ATTENTION */ - if ((status & 0x1e) != 0x2) { -#ifdef DEBUG_DETECT - printk("target %d lun %d: status %d\n", - aip->target, aip->lun, status); -#endif - return DEV_UNKNOWN; - } - } - - /*******************************/ - /* Do a REQUEST SENSE command. */ - /*******************************/ - - if (!acsi_reqsense(acsi_buffer, aip->target, aip->lun)) { - printk( KERN_WARNING "acsi_reqsense failed\n"); - acsi_buffer[0] = 0; - acsi_buffer[2] = UNIT_ATTENTION; - } - reqsense = acsi_buffer[0]; - extsense = acsi_buffer[2] & 0xf; - if (status) { - if ((reqsense & 0x70) == 0x70) { /* extended sense */ - if (extsense != UNIT_ATTENTION && - extsense != NOT_READY) { -#ifdef DEBUG_DETECT - printk("target %d lun %d: extended sense %d\n", - aip->target, aip->lun, extsense); -#endif - return DEV_UNKNOWN; - } - } - else { - if (reqsense & 0x7f) { -#ifdef DEBUG_DETECT - printk("target %d lun %d: sense %d\n", - aip->target, aip->lun, reqsense); -#endif - return DEV_UNKNOWN; - } - } - } - else - if (reqsense == 0x4) { /* SH204 Bug workaround */ -#ifdef DEBUG_DETECT - printk("target %d lun %d status=0 sense=4\n", - aip->target, aip->lun); -#endif - return DEV_UNKNOWN; - } - - /***********************************************************/ - /* Do an INQUIRY command to get more infos on this device. */ - /***********************************************************/ - - /* Assume default values */ - aip->removable = 1; - aip->read_only = 0; - aip->old_atari_disk = 0; - aip->changed = (extsense == NOT_READY); /* medium inserted? */ - aip->size = DEFAULT_SIZE; - got_inquiry = 0; - /* Fake inquiry result for old atari disks */ - memcpy(acsi_buffer, "\000\000\001\000 Adaptec 40xx" - " ", 40); - CMDSET_TARG_LUN(inquiry_cmd, aip->target, aip->lun); - if (acsicmd_dma(inquiry_cmd, acsi_buffer, 1, 0, 0) && - acsi_getstatus() == 0) { - acsicmd_nodma(inquiry_cmd, 0); - acsi_getstatus(); - dma_cache_maintenance( phys_acsi_buffer, 256, 0 ); - got_inquiry = 1; - aip->removable = !!(acsi_buffer[1] & 0x80); - } - if (aip->type == NONE) /* only at boot time */ - print_inquiry(acsi_buffer); - switch(acsi_buffer[0]) { - case TYPE_DISK: - aip->type = HARDDISK; - break; - case TYPE_ROM: - aip->type = CDROM; - aip->read_only = 1; - break; - default: - return DEV_UNKNOWN; - } - /****************************/ - /* Do a MODE SENSE command. */ - /****************************/ - - if (!acsi_mode_sense(aip->target, aip->lun, &sense)) { - printk( KERN_WARNING "No mode sense data.\n" ); - return DEV_UNKNOWN; - } - if ((SECTOR_SIZE(sense) != 512) && - ((aip->type != CDROM) || - !acsi_change_blk_size(aip->target, aip->lun) || - !acsi_mode_sense(aip->target, aip->lun, &sense) || - (SECTOR_SIZE(sense) != 512))) { - printk( KERN_WARNING "Sector size != 512 not supported.\n" ); - return DEV_UNKNOWN; - } - /* There are disks out there that claim to have 0 sectors... */ - if (CAPACITY(sense)) - aip->size = CAPACITY(sense); /* else keep DEFAULT_SIZE */ - if (!got_inquiry && SENSE_TYPE(sense) == SENSE_TYPE_ATARI) { - /* If INQUIRY failed and the sense data suggest an old - * Atari disk (SH20x, Megafile), the disk is not removable - */ - aip->removable = 0; - aip->old_atari_disk = 1; - } - - /******************/ - /* We've done it. */ - /******************/ - - return DEV_SUPPORTED; -} - -EXPORT_SYMBOL(acsi_delay_start); -EXPORT_SYMBOL(acsi_delay_end); -EXPORT_SYMBOL(acsi_wait_for_IRQ); -EXPORT_SYMBOL(acsi_wait_for_noIRQ); -EXPORT_SYMBOL(acsicmd_nodma); -EXPORT_SYMBOL(acsi_getstatus); -EXPORT_SYMBOL(acsi_buffer); -EXPORT_SYMBOL(phys_acsi_buffer); - -#ifdef CONFIG_ATARI_SLM_MODULE -void acsi_attach_SLMs( int (*attach_func)( int, int ) ); - -EXPORT_SYMBOL(acsi_extstatus); -EXPORT_SYMBOL(acsi_end_extstatus); -EXPORT_SYMBOL(acsi_extcmd); -EXPORT_SYMBOL(acsi_attach_SLMs); - -/* to remember IDs of SLM devices, SLM module is loaded later - * (index is target#, contents is lun#, -1 means "no SLM") */ -int SLM_devices[8]; -#endif - -static struct block_device_operations acsi_fops = { - .owner = THIS_MODULE, - .open = acsi_open, - .release = acsi_release, - .ioctl = acsi_ioctl, - .getgeo = acsi_getgeo, - .media_changed = acsi_media_change, - .revalidate_disk= acsi_revalidate, -}; - -#ifdef CONFIG_ATARI_SLM_MODULE -/* call attach_slm() for each device that is a printer; needed for init of SLM - * driver as a module, since it's not yet present if acsi.c is inited and thus - * the bus gets scanned. */ -void acsi_attach_SLMs( int (*attach_func)( int, int ) ) -{ - int i, n = 0; - - for( i = 0; i < 8; ++i ) - if (SLM_devices[i] >= 0) - n += (*attach_func)( i, SLM_devices[i] ); - printk( KERN_INFO "Found %d SLM printer(s) total.\n", n ); -} -#endif /* CONFIG_ATARI_SLM_MODULE */ - - -int acsi_init( void ) -{ - int err = 0; - int i, target, lun; - struct acsi_info_struct *aip; -#ifdef CONFIG_ATARI_SLM - int n_slm = 0; -#endif - if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ACSI)) - return 0; - if (register_blkdev(ACSI_MAJOR, "ad")) { - err = -EBUSY; - goto out1; - } - if (!(acsi_buffer = - (char *)atari_stram_alloc(ACSI_BUFFER_SIZE, "acsi"))) { - err = -ENOMEM; - printk( KERN_ERR "Unable to get ACSI ST-Ram buffer.\n" ); - goto out2; - } - phys_acsi_buffer = virt_to_phys( acsi_buffer ); - STramMask = ATARIHW_PRESENT(EXTD_DMA) ? 0x00000000 : 0xff000000; - - acsi_queue = blk_init_queue(do_acsi_request, &acsi_lock); - if (!acsi_queue) { - err = -ENOMEM; - goto out2a; - } -#ifdef CONFIG_ATARI_SLM - err = slm_init(); -#endif - if (err) - goto out3; - - printk( KERN_INFO "Probing ACSI devices:\n" ); - NDevices = 0; -#ifdef CONFIG_ATARI_SLM_MODULE - for( i = 0; i < 8; ++i ) - SLM_devices[i] = -1; -#endif - stdma_lock(NULL, NULL); - - for (target = 0; target < 8 && NDevices < MAX_DEV; ++target) { - lun = 0; - do { - aip = &acsi_info[NDevices]; - aip->type = NONE; - aip->target = target; - aip->lun = lun; - i = acsi_devinit(aip); - switch (i) { - case DEV_SUPPORTED: - printk( KERN_INFO "Detected "); - switch (aip->type) { - case HARDDISK: - printk("disk"); - break; - case CDROM: - printk("cdrom"); - break; - default: - } - printk(" ad%c at id %d lun %d ", - 'a' + NDevices, target, lun); - if (aip->removable) - printk("(removable) "); - if (aip->read_only) - printk("(read-only) "); - if (aip->size == DEFAULT_SIZE) - printk(" unkown size, using default "); - printk("%ld MByte\n", - (aip->size*512+1024*1024/2)/(1024*1024)); - NDevices++; - break; - case DEV_SLM: -#ifdef CONFIG_ATARI_SLM - n_slm += attach_slm( target, lun ); - break; -#endif -#ifdef CONFIG_ATARI_SLM_MODULE - SLM_devices[target] = lun; - break; -#endif - /* neither of the above: fall through to unknown device */ - case DEV_UNKNOWN: - printk( KERN_INFO "Detected unsupported device at " - "id %d lun %d\n", target, lun); - break; - } - } -#ifdef CONFIG_ACSI_MULTI_LUN - while (i != DEV_NONE && ++lun < MAX_LUN); -#else - while (0); -#endif - } - - /* reenable interrupt */ - ENABLE_IRQ(); - stdma_release(); - -#ifndef CONFIG_ATARI_SLM - printk( KERN_INFO "Found %d ACSI device(s) total.\n", NDevices ); -#else - printk( KERN_INFO "Found %d ACSI device(s) and %d SLM printer(s) total.\n", - NDevices, n_slm ); -#endif - err = -ENOMEM; - for( i = 0; i < NDevices; ++i ) { - acsi_gendisk[i] = alloc_disk(16); - if (!acsi_gendisk[i]) - goto out4; - } - - for( i = 0; i < NDevices; ++i ) { - struct gendisk *disk = acsi_gendisk[i]; - sprintf(disk->disk_name, "ad%c", 'a'+i); - aip = &acsi_info[NDevices]; - disk->major = ACSI_MAJOR; - disk->first_minor = i << 4; - if (acsi_info[i].type != HARDDISK) - disk->minors = 1; - disk->fops = &acsi_fops; - disk->private_data = &acsi_info[i]; - set_capacity(disk, acsi_info[i].size); - disk->queue = acsi_queue; - add_disk(disk); - } - return 0; -out4: - while (i--) - put_disk(acsi_gendisk[i]); -out3: - blk_cleanup_queue(acsi_queue); -out2a: - atari_stram_free( acsi_buffer ); -out2: - unregister_blkdev( ACSI_MAJOR, "ad" ); -out1: - return err; -} - - -#ifdef MODULE - -MODULE_LICENSE("GPL"); - -int init_module(void) -{ - int err; - - if ((err = acsi_init())) - return( err ); - printk( KERN_INFO "ACSI driver loaded as module.\n"); - return( 0 ); -} - -void cleanup_module(void) -{ - int i; - del_timer( &acsi_timer ); - blk_cleanup_queue(acsi_queue); - atari_stram_free( acsi_buffer ); - - if (unregister_blkdev( ACSI_MAJOR, "ad" ) != 0) - printk( KERN_ERR "acsi: cleanup_module failed\n"); - - for (i = 0; i < NDevices; i++) { - del_gendisk(acsi_gendisk[i]); - put_disk(acsi_gendisk[i]); - } -} -#endif - -/* - * This routine is called to flush all partitions and partition tables - * for a changed scsi disk, and then re-read the new partition table. - * If we are revalidating a disk because of a media change, then we - * enter with usage == 0. If we are using an ioctl, we automatically have - * usage == 1 (we need an open channel to use an ioctl :-), so this - * is our limit. - * - * Changes by Martin Rogge, 9th Aug 1995: - * got cd-roms to work by calling acsi_devinit. There are only two problems: - * First, if there is no medium inserted, the status will remain "changed". - * That is no problem at all, but our design of three-valued logic (medium - * changed, medium not changed, no medium inserted). - * Secondly the check could fail completely and the drive could deliver - * nonsensical data, which could mess up the acsi_info[] structure. In - * that case we try to make the entry safe. - * - */ - -static int acsi_revalidate(struct gendisk *disk) -{ - struct acsi_info_struct *aip = disk->private_data; - stdma_lock( NULL, NULL ); - if (acsi_devinit(aip) != DEV_SUPPORTED) { - printk( KERN_ERR "ACSI: revalidate failed for target %d lun %d\n", - aip->target, aip->lun); - aip->size = 0; - aip->read_only = 1; - aip->removable = 1; - aip->changed = 1; /* next acsi_open will try again... */ - } - - ENABLE_IRQ(); - stdma_release(); - set_capacity(disk, aip->size); - return 0; -} diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c index 27a139025ce..6ce8b897e26 100644 --- a/drivers/block/amiflop.c +++ b/drivers/block/amiflop.c @@ -1363,7 +1363,7 @@ static void redo_fd_request(void) #ifdef DEBUG printk("fd: sector %ld + %d requested for %s\n", CURRENT->sector,cnt, - (CURRENT->cmd==READ)?"read":"write"); + (rq_data_dir(CURRENT) == READ) ? "read" : "write"); #endif block = CURRENT->sector + cnt; if ((int)block > floppy->blocks) { diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 5acc6c44aea..0fcad430474 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -87,6 +87,7 @@ static const struct pci_device_id cciss_pci_device_id[] = { {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3214}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D}, {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, {0,} @@ -119,6 +120,7 @@ static struct board_type products[] = { {0x3214103C, "Smart Array E200i", &SA5_access, 120}, {0x3215103C, "Smart Array E200i", &SA5_access, 120}, {0x3237103C, "Smart Array E500", &SA5_access, 512}, + {0x323D103C, "Smart Array P700m", &SA5_access, 512}, {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120}, }; diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 0ed5470d253..4503290da40 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -74,6 +74,7 @@ #include <linux/highmem.h> #include <linux/gfp.h> #include <linux/kthread.h> +#include <linux/splice.h> #include <asm/uaccess.h> @@ -401,50 +402,73 @@ struct lo_read_data { }; static int -lo_read_actor(read_descriptor_t *desc, struct page *page, - unsigned long offset, unsigned long size) +lo_splice_actor(struct pipe_inode_info *pipe, struct pipe_buffer *buf, + struct splice_desc *sd) { - unsigned long count = desc->count; - struct lo_read_data *p = desc->arg.data; + struct lo_read_data *p = sd->u.data; struct loop_device *lo = p->lo; + struct page *page = buf->page; sector_t IV; + size_t size; + int ret; - IV = ((sector_t) page->index << (PAGE_CACHE_SHIFT - 9))+(offset >> 9); + ret = buf->ops->confirm(pipe, buf); + if (unlikely(ret)) + return ret; - if (size > count) - size = count; + IV = ((sector_t) page->index << (PAGE_CACHE_SHIFT - 9)) + + (buf->offset >> 9); + size = sd->len; + if (size > p->bsize) + size = p->bsize; - if (lo_do_transfer(lo, READ, page, offset, p->page, p->offset, size, IV)) { - size = 0; + if (lo_do_transfer(lo, READ, page, buf->offset, p->page, p->offset, size, IV)) { printk(KERN_ERR "loop: transfer error block %ld\n", page->index); - desc->error = -EINVAL; + size = -EINVAL; } flush_dcache_page(p->page); - desc->count = count - size; - desc->written += size; - p->offset += size; + if (size > 0) + p->offset += size; + return size; } static int +lo_direct_splice_actor(struct pipe_inode_info *pipe, struct splice_desc *sd) +{ + return __splice_from_pipe(pipe, sd, lo_splice_actor); +} + +static int do_lo_receive(struct loop_device *lo, struct bio_vec *bvec, int bsize, loff_t pos) { struct lo_read_data cookie; + struct splice_desc sd; struct file *file; - int retval; + long retval; cookie.lo = lo; cookie.page = bvec->bv_page; cookie.offset = bvec->bv_offset; cookie.bsize = bsize; + + sd.len = 0; + sd.total_len = bvec->bv_len; + sd.flags = 0; + sd.pos = pos; + sd.u.data = &cookie; + file = lo->lo_backing_file; - retval = file->f_op->sendfile(file, &pos, bvec->bv_len, - lo_read_actor, &cookie); - return (retval < 0)? retval: 0; + retval = splice_direct_to_actor(file, &sd, lo_direct_splice_actor); + + if (retval < 0) + return retval; + + return 0; } static int @@ -679,8 +703,8 @@ static int loop_change_fd(struct loop_device *lo, struct file *lo_file, if (!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode)) goto out_putf; - /* new backing store needs to support loop (eg sendfile) */ - if (!inode->i_fop->sendfile) + /* new backing store needs to support loop (eg splice_read) */ + if (!inode->i_fop->splice_read) goto out_putf; /* size of the new backing store needs to be the same */ @@ -760,7 +784,7 @@ static int loop_set_fd(struct loop_device *lo, struct file *lo_file, * If we can't read - sorry. If we only can't write - well, * it's going to be read-only. */ - if (!file->f_op->sendfile) + if (!file->f_op->splice_read) goto out_putf; if (aops->prepare_write && aops->commit_write) lo_flags |= LO_FLAGS_USE_AOPS; diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 069ae39a9cd..c575fb1d585 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -416,7 +416,7 @@ static void nbd_clear_que(struct nbd_device *lo) /* * We always wait for result of write, for now. It would be nice to make it optional * in future - * if ((req->cmd == WRITE) && (lo->flags & NBD_WRITE_NOCHK)) + * if ((rq_data_dir(req) == WRITE) && (lo->flags & NBD_WRITE_NOCHK)) * { printk( "Warning: Ignoring result!\n"); nbd_end_request( req ); } */ diff --git a/drivers/cdrom/Kconfig b/drivers/cdrom/Kconfig deleted file mode 100644 index 4b12e9031fb..00000000000 --- a/drivers/cdrom/Kconfig +++ /dev/null @@ -1,213 +0,0 @@ -# -# CDROM driver configuration -# - -menu "Old CD-ROM drivers (not SCSI, not IDE)" - depends on ISA && BLOCK - -config CD_NO_IDESCSI - bool "Support non-SCSI/IDE/ATAPI CDROM drives" - ---help--- - If you have a CD-ROM drive that is neither SCSI nor IDE/ATAPI, say Y - here, otherwise N. Read the CD-ROM-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - Note that the answer to this question doesn't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about these CD-ROM drives. If you are unsure what you - have, say Y and find out whether you have one of the following - drives. - - For each of these drivers, a <file:Documentation/cdrom/{driver_name}> - exists. Especially in cases where you do not know exactly which kind - of drive you have you should read there. Most of these drivers use a - file drivers/cdrom/{driver_name}.h where you can define your - interface parameters and switch some internal goodies. - - To compile these CD-ROM drivers as a module, choose M instead of Y. - - If you want to use any of these CD-ROM drivers, you also have to - answer Y or M to "ISO 9660 CD-ROM file system support" below (this - answer will get "defaulted" for you if you enable any of the Linux - CD-ROM drivers). - -config AZTCD - tristate "Aztech/Orchid/Okano/Wearnes/TXC/CyDROM CDROM support" - depends on CD_NO_IDESCSI - ---help--- - This is your driver if you have an Aztech CDA268-01A, Orchid - CD-3110, Okano or Wearnes CDD110, Conrad TXC, or CyCD-ROM CR520 or - CR540 CD-ROM drive. This driver -- just like all these CD-ROM - drivers -- is NOT for CD-ROM drives with IDE/ATAPI interfaces, such - as Aztech CDA269-031SE. Please read the file - <file:Documentation/cdrom/aztcd>. - - If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM - file system support" below, because that's the file system used on - CD-ROMs. - - To compile this driver as a module, choose M here: the - module will be called aztcd. - -config GSCD - tristate "Goldstar R420 CDROM support" - depends on CD_NO_IDESCSI - ---help--- - If this is your CD-ROM drive, say Y here. As described in the file - <file:Documentation/cdrom/gscd>, you might have to change a setting - in the file <file:drivers/cdrom/gscd.h> before compiling the - kernel. Please read the file <file:Documentation/cdrom/gscd>. - - If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM - file system support" below, because that's the file system used on - CD-ROMs. - - To compile this driver as a module, choose M here: the - module will be called gscd. - -config SBPCD - tristate "Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support" - depends on CD_NO_IDESCSI && BROKEN_ON_SMP - ---help--- - This driver supports most of the drives which use the Panasonic or - Sound Blaster interface. Please read the file - <file:Documentation/cdrom/sbpcd>. - - The Matsushita CR-521, CR-522, CR-523, CR-562, CR-563 drives - (sometimes labeled "Creative"), the Creative Labs CD200, the - Longshine LCS-7260, the "IBM External ISA CD-ROM" (in fact a CR-56x - model), the TEAC CD-55A fall under this category. Some other - "electrically compatible" drives (Vertos, Genoa, some Funai models) - are currently not supported; for the Sanyo H94A drive currently a - separate driver (asked later) is responsible. Most drives have a - uniquely shaped faceplate, with a caddyless motorized drawer, but - without external brand markings. The older CR-52x drives have a - caddy and manual loading/eject, but still no external markings. The - driver is able to do an extended auto-probing for interface - addresses and drive types; this can help to find facts in cases you - are not sure, but can consume some time during the boot process if - none of the supported drives gets found. Once your drive got found, - you should enter the reported parameters into - <file:drivers/cdrom/sbpcd.h> and set "DISTRIBUTION 0" there. - - This driver can support up to four CD-ROM controller cards, and each - card can support up to four CD-ROM drives; if you say Y here, you - will be asked how many controller cards you have. If compiled as a - module, only one controller card (but with up to four drives) is - usable. - - If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM - file system support" below, because that's the file system used on - CD-ROMs. - - To compile this driver as a module, choose M here: the - module will be called sbpcd. - -config MCDX - tristate "Mitsumi CDROM support" - depends on CD_NO_IDESCSI - ---help--- - Use this driver if you want to be able to use your Mitsumi LU-005, - FX-001 or FX-001D CD-ROM drive. - - Please read the file <file:Documentation/cdrom/mcdx>. - - If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM - file system support" below, because that's the file system used on - CD-ROMs. - - To compile this driver as a module, choose M here: the - module will be called mcdx. - -config OPTCD - tristate "Optics Storage DOLPHIN 8000AT CDROM support" - depends on CD_NO_IDESCSI - ---help--- - This is the driver for the 'DOLPHIN' drive with a 34-pin Sony - compatible interface. It also works with the Lasermate CR328A. If - you have one of those, say Y. This driver does not work for the - Optics Storage 8001 drive; use the IDE-ATAPI CD-ROM driver for that - one. Please read the file <file:Documentation/cdrom/optcd>. - - If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM - file system support" below, because that's the file system used on - CD-ROMs. - - To compile this driver as a module, choose M here: the - module will be called optcd. - -config CM206 - tristate "Philips/LMS CM206 CDROM support" - depends on CD_NO_IDESCSI && BROKEN_ON_SMP - ---help--- - If you have a Philips/LMS CD-ROM drive cm206 in combination with a - cm260 host adapter card, say Y here. Please also read the file - <file:Documentation/cdrom/cm206>. - - If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM - file system support" below, because that's the file system used on - CD-ROMs. - - To compile this driver as a module, choose M here: the - module will be called cm206. - -config SJCD - tristate "Sanyo CDR-H94A CDROM support" - depends on CD_NO_IDESCSI - help - If this is your CD-ROM drive, say Y here and read the file - <file:Documentation/cdrom/sjcd>. You should then also say Y or M to - "ISO 9660 CD-ROM file system support" below, because that's the - file system used on CD-ROMs. - - To compile this driver as a module, choose M here: the - module will be called sjcd. - -config ISP16_CDI - tristate "ISP16/MAD16/Mozart soft configurable cdrom interface support" - depends on CD_NO_IDESCSI - ---help--- - These are sound cards with built-in cdrom interfaces using the OPTi - 82C928 or 82C929 chips. Say Y here to have them detected and - possibly configured at boot time. In addition, You'll have to say Y - to a driver for the particular cdrom drive you have attached to the - card. Read <file:Documentation/cdrom/isp16> for details. - - To compile this driver as a module, choose M here: the - module will be called isp16. - -config CDU31A - tristate "Sony CDU31A/CDU33A CDROM support" - depends on CD_NO_IDESCSI && BROKEN_ON_SMP - ---help--- - These CD-ROM drives have a spring-pop-out caddyless drawer, and a - rectangular green LED centered beneath it. NOTE: these CD-ROM - drives will not be auto detected by the kernel at boot time; you - have to provide the interface address as an option to the kernel at - boot time as described in <file:Documentation/cdrom/cdu31a> or fill - in your parameters into <file:drivers/cdrom/cdu31a.c>. Try "man - bootparam" or see the documentation of your boot loader (lilo or - loadlin) about how to pass options to the kernel. - - If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM - file system support" below, because that's the file system used on - CD-ROMs. - - To compile this driver as a module, choose M here: the - module will be called cdu31a. - -config CDU535 - tristate "Sony CDU535 CDROM support" - depends on CD_NO_IDESCSI - ---help--- - This is the driver for the older Sony CDU-535 and CDU-531 CD-ROM - drives. Please read the file <file:Documentation/cdrom/sonycd535>. - - If you say Y here, you should also say Y or M to "ISO 9660 CD-ROM - file system support" below, because that's the file system used on - CD-ROMs. - - To compile this driver as a module, choose M here: the - module will be called sonycd535. - -endmenu diff --git a/drivers/cdrom/Makefile b/drivers/cdrom/Makefile index d1d1e5a4be7..774c180a4e1 100644 --- a/drivers/cdrom/Makefile +++ b/drivers/cdrom/Makefile @@ -10,14 +10,4 @@ obj-$(CONFIG_BLK_DEV_SR) += cdrom.o obj-$(CONFIG_PARIDE_PCD) += cdrom.o obj-$(CONFIG_CDROM_PKTCDVD) += cdrom.o -obj-$(CONFIG_AZTCD) += aztcd.o -obj-$(CONFIG_CDU31A) += cdu31a.o cdrom.o -obj-$(CONFIG_CM206) += cm206.o cdrom.o -obj-$(CONFIG_GSCD) += gscd.o -obj-$(CONFIG_ISP16_CDI) += isp16.o -obj-$(CONFIG_MCDX) += mcdx.o cdrom.o -obj-$(CONFIG_OPTCD) += optcd.o -obj-$(CONFIG_SBPCD) += sbpcd.o cdrom.o -obj-$(CONFIG_SJCD) += sjcd.o -obj-$(CONFIG_CDU535) += sonycd535.o obj-$(CONFIG_VIOCD) += viocd.o cdrom.o diff --git a/drivers/cdrom/aztcd.c b/drivers/cdrom/aztcd.c deleted file mode 100644 index 1f9fb7a9670..00000000000 --- a/drivers/cdrom/aztcd.c +++ /dev/null @@ -1,2492 +0,0 @@ -#define AZT_VERSION "2.60" - -/* $Id: aztcd.c,v 2.60 1997/11/29 09:51:19 root Exp root $ - linux/drivers/block/aztcd.c - Aztech CD268 CDROM driver - - Copyright (C) 1994-98 Werner Zimmermann(Werner.Zimmermann@fht-esslingen.de) - - based on Mitsumi CDROM driver by Martin Hariss and preworks by - Eberhard Moenkeberg; contains contributions by Joe Nardone and Robby - Schirmer. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - HISTORY - V0.0 Adaption to Aztech CD268-01A Version 1.3 - Version is PRE_ALPHA, unresolved points: - 1. I use busy wait instead of timer wait in STEN_LOW,DTEN_LOW - thus driver causes CPU overhead and is very slow - 2. could not find a way to stop the drive, when it is - in data read mode, therefore I had to set - msf.end.min/sec/frame to 0:0:1 (in azt_poll); so only one - frame can be read in sequence, this is also the reason for - 3. getting 'timeout in state 4' messages, but nevertheless - it works - W.Zimmermann, Oct. 31, 1994 - V0.1 Version is ALPHA, problems #2 and #3 resolved. - W.Zimmermann, Nov. 3, 1994 - V0.2 Modification to some comments, debugging aids for partial test - with Borland C under DOS eliminated. Timer interrupt wait - STEN_LOW_WAIT additionally to busy wait for STEN_LOW implemented; - use it only for the 'slow' commands (ACMD_GET_Q_CHANNEL, ACMD_ - SEEK_TO_LEAD_IN), all other commands are so 'fast', that busy - waiting seems better to me than interrupt rescheduling. - Besides that, when used in the wrong place, STEN_LOW_WAIT causes - kernel panic. - In function aztPlay command ACMD_PLAY_AUDIO added, should make - audio functions work. The Aztech drive needs different commands - to read data tracks and play audio tracks. - W.Zimmermann, Nov. 8, 1994 - V0.3 Recognition of missing drive during boot up improved (speeded up). - W.Zimmermann, Nov. 13, 1994 - V0.35 Rewrote the control mechanism in azt_poll (formerly mcd_poll) - including removal of all 'goto' commands. :-); - J. Nardone, Nov. 14, 1994 - V0.4 Renamed variables and constants to 'azt' instead of 'mcd'; had - to make some "compatibility" defines in azt.h; please note, - that the source file was renamed to azt.c, the include file to - azt.h - Speeded up drive recognition during init (will be a little bit - slower than before if no drive is installed!); suggested by - Robby Schirmer. - read_count declared volatile and set to AZT_BUF_SIZ to make - drive faster (now 300kB/sec, was 60kB/sec before, measured - by 'time dd if=/dev/cdrom of=/dev/null bs=2048 count=4096'; - different AZT_BUF_SIZes were test, above 16 no further im- - provement seems to be possible; suggested by E.Moenkeberg. - W.Zimmermann, Nov. 18, 1994 - V0.42 Included getAztStatus command in GetQChannelInfo() to allow - reading Q-channel info on audio disks, if drive is stopped, - and some other bug fixes in the audio stuff, suggested by - Robby Schirmer. - Added more ioctls (reading data in mode 1 and mode 2). - Completely removed the old azt_poll() routine. - Detection of ORCHID CDS-3110 in aztcd_init implemented. - Additional debugging aids (see the readme file). - W.Zimmermann, Dec. 9, 1994 - V0.50 Autodetection of drives implemented. - W.Zimmermann, Dec. 12, 1994 - V0.52 Prepared for including in the standard kernel, renamed most - variables to contain 'azt', included autoconf.h - W.Zimmermann, Dec. 16, 1994 - V0.6 Version for being included in the standard Linux kernel. - Renamed source and header file to aztcd.c and aztcd.h - W.Zimmermann, Dec. 24, 1994 - V0.7 Changed VERIFY_READ to VERIFY_WRITE in aztcd_ioctl, case - CDROMREADMODE1 and CDROMREADMODE2; bug fix in the ioctl, - which causes kernel crashes when playing audio, changed - include-files (config.h instead of autoconf.h, removed - delay.h) - W.Zimmermann, Jan. 8, 1995 - V0.72 Some more modifications for adaption to the standard kernel. - W.Zimmermann, Jan. 16, 1995 - V0.80 aztcd is now part of the standard kernel since version 1.1.83. - Modified the SET_TIMER and CLEAR_TIMER macros to comply with - the new timer scheme. - W.Zimmermann, Jan. 21, 1995 - V0.90 Included CDROMVOLCTRL, but with my Aztech drive I can only turn - the channels on and off. If it works better with your drive, - please mail me. Also implemented ACMD_CLOSE for CDROMSTART. - W.Zimmermann, Jan. 24, 1995 - V1.00 Implemented close and lock tray commands. Patches supplied by - Frank Racis - Added support for loadable MODULEs, so aztcd can now also be - loaded by insmod and removed by rmmod during run time - Werner Zimmermann, Mar. 24, 95 - V1.10 Implemented soundcard configuration for Orchid CDS-3110 drives - connected to Soundwave32 cards. Release for LST 2.1. - (still experimental) - Werner Zimmermann, May 8, 95 - V1.20 Implemented limited support for DOSEMU0.60's cdrom.c. Now it works, but - sometimes DOSEMU may hang for 30 seconds or so. A fully functional ver- - sion needs an update of Dosemu0.60's cdrom.c, which will come with the - next revision of Dosemu. - Also Soundwave32 support now works. - Werner Zimmermann, May 22, 95 - V1.30 Auto-eject feature. Inspired by Franc Racis (racis@psu.edu) - Werner Zimmermann, July 4, 95 - V1.40 Started multisession support. Implementation copied from mcdx.c - by Heiko Schlittermann. Not tested yet. - Werner Zimmermann, July 15, 95 - V1.50 Implementation of ioctl CDROMRESET, continued multisession, began - XA, but still untested. Heavy modifications to drive status de- - tection. - Werner Zimmermann, July 25, 95 - V1.60 XA support now should work. Speeded up drive recognition in cases, - where no drive is installed. - Werner Zimmermann, August 8, 1995 - V1.70 Multisession support now is completed, but there is still not - enough testing done. If you can test it, please contact me. For - details please read Documentation/cdrom/aztcd - Werner Zimmermann, August 19, 1995 - V1.80 Modification to suit the new kernel boot procedure introduced - with kernel 1.3.33. Will definitely not work with older kernels. - Programming done by Linus himself. - Werner Zimmermann, October 11, 1995 - V1.90 Support for Conrad TXC drives, thank's to Jochen Kunz and Olaf Kaluza. - Werner Zimmermann, October 21, 1995 - V2.00 Changed #include "blk.h" to <linux/blk.h> as the directory - structure was changed. README.aztcd is now /usr/src/docu- - mentation/cdrom/aztcd - Werner Zimmermann, November 10, 95 - V2.10 Started to modify azt_poll to prevent reading beyond end of - tracks. - Werner Zimmermann, December 3, 95 - V2.20 Changed some comments - Werner Zimmermann, April 1, 96 - V2.30 Implemented support for CyCDROM CR520, CR940, Code for CR520 - delivered by H.Berger with preworks by E.Moenkeberg. - Werner Zimmermann, April 29, 96 - V2.40 Reorganized the placement of functions in the source code file - to reflect the layered approach; did not actually change code - Werner Zimmermann, May 1, 96 - V2.50 Heiko Eissfeldt suggested to remove some VERIFY_READs in - aztcd_ioctl; check_aztcd_media_change modified - Werner Zimmermann, May 16, 96 - V2.60 Implemented Auto-Probing; made changes for kernel's 2.1.xx blocksize - Adaption to linux kernel > 2.1.0 - Werner Zimmermann, Nov 29, 97 - - November 1999 -- Make kernel-parameter implementation work with 2.3.x - Removed init_module & cleanup_module in favor of - module_init & module_exit. - Torben Mathiasen <tmm@image.dk> -*/ - -#include <linux/blkdev.h> -#include "aztcd.h" - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/mm.h> -#include <linux/timer.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/cdrom.h> -#include <linux/ioport.h> -#include <linux/string.h> -#include <linux/major.h> - -#include <linux/init.h> - -#include <asm/system.h> -#include <asm/io.h> - -#include <asm/uaccess.h> - -/*########################################################################### - Defines - ########################################################################### -*/ - -#define MAJOR_NR AZTECH_CDROM_MAJOR -#define QUEUE (azt_queue) -#define CURRENT elv_next_request(azt_queue) -#define SET_TIMER(func, jifs) delay_timer.expires = jiffies + (jifs); \ - delay_timer.function = (void *) (func); \ - add_timer(&delay_timer); - -#define CLEAR_TIMER del_timer(&delay_timer); - -#define RETURNM(message,value) {printk("aztcd: Warning: %s failed\n",message);\ - return value;} -#define RETURN(message) {printk("aztcd: Warning: %s failed\n",message);\ - return;} - -/* Macros to switch the IDE-interface to the slave device and back to the master*/ -#define SWITCH_IDE_SLAVE outb_p(0xa0,azt_port+6); \ - outb_p(0x10,azt_port+6); \ - outb_p(0x00,azt_port+7); \ - outb_p(0x10,azt_port+6); -#define SWITCH_IDE_MASTER outb_p(0xa0,azt_port+6); - - -#if 0 -#define AZT_TEST -#define AZT_TEST1 /* <int-..> */ -#define AZT_TEST2 /* do_aztcd_request */ -#define AZT_TEST3 /* AZT_S_state */ -#define AZT_TEST4 /* QUICK_LOOP-counter */ -#define AZT_TEST5 /* port(1) state */ -#define AZT_DEBUG -#define AZT_DEBUG_MULTISESSION -#endif - -static struct request_queue *azt_queue; - -static int current_valid(void) -{ - return CURRENT && - CURRENT->cmd == READ && - CURRENT->sector != -1; -} - -#define AFL_STATUSorDATA (AFL_STATUS | AFL_DATA) -#define AZT_BUF_SIZ 16 - -#define READ_TIMEOUT 3000 - -#define azt_port aztcd /*needed for the modutils */ - -/*########################################################################## - Type Definitions - ########################################################################## -*/ -enum azt_state_e { AZT_S_IDLE, /* 0 */ - AZT_S_START, /* 1 */ - AZT_S_MODE, /* 2 */ - AZT_S_READ, /* 3 */ - AZT_S_DATA, /* 4 */ - AZT_S_STOP, /* 5 */ - AZT_S_STOPPING /* 6 */ -}; -enum azt_read_modes { AZT_MODE_0, /*read mode for audio disks, not supported by Aztech firmware */ - AZT_MODE_1, /*read mode for normal CD-ROMs */ - AZT_MODE_2 /*read mode for XA CD-ROMs */ -}; - -/*########################################################################## - Global Variables - ########################################################################## -*/ -static int aztPresent = 0; - -static volatile int azt_transfer_is_active = 0; - -static char azt_buf[CD_FRAMESIZE_RAW * AZT_BUF_SIZ]; /*buffer for block size conversion */ -#if AZT_PRIVATE_IOCTLS -static char buf[CD_FRAMESIZE_RAW]; /*separate buffer for the ioctls */ -#endif - -static volatile int azt_buf_bn[AZT_BUF_SIZ], azt_next_bn; -static volatile int azt_buf_in, azt_buf_out = -1; -static volatile int azt_error = 0; -static int azt_open_count = 0; -static volatile enum azt_state_e azt_state = AZT_S_IDLE; -#ifdef AZT_TEST3 -static volatile enum azt_state_e azt_state_old = AZT_S_STOP; -static volatile int azt_st_old = 0; -#endif -static volatile enum azt_read_modes azt_read_mode = AZT_MODE_1; - -static int azt_mode = -1; -static volatile int azt_read_count = 1; - -static int azt_port = AZT_BASE_ADDR; - -module_param(azt_port, int, 0); - -static int azt_port_auto[16] = AZT_BASE_AUTO; - -static char azt_cont = 0; -static char azt_init_end = 0; -static char azt_auto_eject = AZT_AUTO_EJECT; - -static int AztTimeout, AztTries; -static DECLARE_WAIT_QUEUE_HEAD(azt_waitq); -static DEFINE_TIMER(delay_timer, NULL, 0, 0); - -static struct azt_DiskInfo DiskInfo; -static struct azt_Toc Toc[MAX_TRACKS]; -static struct azt_Play_msf azt_Play; - -static int aztAudioStatus = CDROM_AUDIO_NO_STATUS; -static char aztDiskChanged = 1; -static char aztTocUpToDate = 0; - -static unsigned char aztIndatum; -static unsigned long aztTimeOutCount; -static int aztCmd = 0; - -static DEFINE_SPINLOCK(aztSpin); - -/*########################################################################### - Function Prototypes - ########################################################################### -*/ -/* CDROM Drive Low Level I/O Functions */ -static void aztStatTimer(void); - -/* CDROM Drive Command Functions */ -static int aztGetDiskInfo(void); -#if AZT_MULTISESSION -static int aztGetMultiDiskInfo(void); -#endif -static int aztGetToc(int multi); - -/* Kernel Interface Functions */ -static int check_aztcd_media_change(struct gendisk *disk); -static int aztcd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd, - unsigned long arg); -static int aztcd_open(struct inode *ip, struct file *fp); -static int aztcd_release(struct inode *inode, struct file *file); - -static struct block_device_operations azt_fops = { - .owner = THIS_MODULE, - .open = aztcd_open, - .release = aztcd_release, - .ioctl = aztcd_ioctl, - .media_changed = check_aztcd_media_change, -}; - -/* Aztcd State Machine: Controls Drive Operating State */ -static void azt_poll(void); - -/* Miscellaneous support functions */ -static void azt_hsg2msf(long hsg, struct msf *msf); -static long azt_msf2hsg(struct msf *mp); -static void azt_bin2bcd(unsigned char *p); -static int azt_bcd2bin(unsigned char bcd); - -/*########################################################################## - CDROM Drive Low Level I/O Functions - ########################################################################## -*/ -/* Macros for the drive hardware interface handshake, these macros use - busy waiting */ -/* Wait for OP_OK = drive answers with AFL_OP_OK after receiving a command*/ -# define OP_OK op_ok() -static void op_ok(void) -{ - aztTimeOutCount = 0; - do { - aztIndatum = inb(DATA_PORT); - aztTimeOutCount++; - if (aztTimeOutCount >= AZT_TIMEOUT) { - printk("aztcd: Error Wait OP_OK\n"); - break; - } - } while (aztIndatum != AFL_OP_OK); -} - -/* Wait for PA_OK = drive answers with AFL_PA_OK after receiving parameters*/ -#if 0 -# define PA_OK pa_ok() -static void pa_ok(void) -{ - aztTimeOutCount = 0; - do { - aztIndatum = inb(DATA_PORT); - aztTimeOutCount++; - if (aztTimeOutCount >= AZT_TIMEOUT) { - printk("aztcd: Error Wait PA_OK\n"); - break; - } - } while (aztIndatum != AFL_PA_OK); -} -#endif - -/* Wait for STEN=Low = handshake signal 'AFL_.._OK available or command executed*/ -# define STEN_LOW sten_low() -static void sten_low(void) -{ - aztTimeOutCount = 0; - do { - aztIndatum = inb(STATUS_PORT); - aztTimeOutCount++; - if (aztTimeOutCount >= AZT_TIMEOUT) { - if (azt_init_end) - printk - ("aztcd: Error Wait STEN_LOW commands:%x\n", - aztCmd); - break; - } - } while (aztIndatum & AFL_STATUS); -} - -/* Wait for DTEN=Low = handshake signal 'Data available'*/ -# define DTEN_LOW dten_low() -static void dten_low(void) -{ - aztTimeOutCount = 0; - do { - aztIndatum = inb(STATUS_PORT); - aztTimeOutCount++; - if (aztTimeOutCount >= AZT_TIMEOUT) { - printk("aztcd: Error Wait DTEN_OK\n"); - break; - } - } while (aztIndatum & AFL_DATA); -} - -/* - * Macro for timer wait on STEN=Low, should only be used for 'slow' commands; - * may cause kernel panic when used in the wrong place -*/ -#define STEN_LOW_WAIT statusAzt() -static void statusAzt(void) -{ - AztTimeout = AZT_STATUS_DELAY; - SET_TIMER(aztStatTimer, HZ / 100); - sleep_on(&azt_waitq); - if (AztTimeout <= 0) - printk("aztcd: Error Wait STEN_LOW_WAIT command:%x\n", - aztCmd); - return; -} - -static void aztStatTimer(void) -{ - if (!(inb(STATUS_PORT) & AFL_STATUS)) { - wake_up(&azt_waitq); - return; - } - AztTimeout--; - if (AztTimeout <= 0) { - wake_up(&azt_waitq); - printk("aztcd: Error aztStatTimer: Timeout\n"); - return; - } - SET_TIMER(aztStatTimer, HZ / 100); -} - -/*########################################################################## - CDROM Drive Command Functions - ########################################################################## -*/ -/* - * Send a single command, return -1 on error, else 0 -*/ -static int aztSendCmd(int cmd) -{ - unsigned char data; - int retry; - -#ifdef AZT_DEBUG - printk("aztcd: Executing command %x\n", cmd); -#endif - - if ((azt_port == 0x1f0) || (azt_port == 0x170)) - SWITCH_IDE_SLAVE; /*switch IDE interface to slave configuration */ - - aztCmd = cmd; - outb(POLLED, MODE_PORT); - do { - if (inb(STATUS_PORT) & AFL_STATUS) - break; - inb(DATA_PORT); /* if status left from last command, read and */ - } while (1); /* discard it */ - do { - if (inb(STATUS_PORT) & AFL_DATA) - break; - inb(DATA_PORT); /* if data left from last command, read and */ - } while (1); /* discard it */ - for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) { - outb((unsigned char) cmd, CMD_PORT); - STEN_LOW; - data = inb(DATA_PORT); - if (data == AFL_OP_OK) { - return 0; - } /*OP_OK? */ - if (data == AFL_OP_ERR) { - STEN_LOW; - data = inb(DATA_PORT); - printk - ("### Error 1 aztcd: aztSendCmd %x Error Code %x\n", - cmd, data); - } - } - if (retry >= AZT_RETRY_ATTEMPTS) { - printk("### Error 2 aztcd: aztSendCmd %x \n", cmd); - azt_error = 0xA5; - } - RETURNM("aztSendCmd", -1); -} - -/* - * Send a play or read command to the drive, return -1 on error, else 0 -*/ -static int sendAztCmd(int cmd, struct azt_Play_msf *params) -{ - unsigned char data; - int retry; - -#ifdef AZT_DEBUG - printk("aztcd: play start=%02x:%02x:%02x end=%02x:%02x:%02x\n", - params->start.min, params->start.sec, params->start.frame, - params->end.min, params->end.sec, params->end.frame); -#endif - for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) { - aztSendCmd(cmd); - outb(params->start.min, CMD_PORT); - outb(params->start.sec, CMD_PORT); - outb(params->start.frame, CMD_PORT); - outb(params->end.min, CMD_PORT); - outb(params->end.sec, CMD_PORT); - outb(params->end.frame, CMD_PORT); - STEN_LOW; - data = inb(DATA_PORT); - if (data == AFL_PA_OK) { - return 0; - } /*PA_OK ? */ - if (data == AFL_PA_ERR) { - STEN_LOW; - data = inb(DATA_PORT); - printk - ("### Error 1 aztcd: sendAztCmd %x Error Code %x\n", - cmd, data); - } - } - if (retry >= AZT_RETRY_ATTEMPTS) { - printk("### Error 2 aztcd: sendAztCmd %x\n ", cmd); - azt_error = 0xA5; - } - RETURNM("sendAztCmd", -1); -} - -/* - * Send a seek command to the drive, return -1 on error, else 0 -*/ -static int aztSeek(struct azt_Play_msf *params) -{ - unsigned char data; - int retry; - -#ifdef AZT_DEBUG - printk("aztcd: aztSeek %02x:%02x:%02x\n", - params->start.min, params->start.sec, params->start.frame); -#endif - for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) { - aztSendCmd(ACMD_SEEK); - outb(params->start.min, CMD_PORT); - outb(params->start.sec, CMD_PORT); - outb(params->start.frame, CMD_PORT); - STEN_LOW; - data = inb(DATA_PORT); - if (data == AFL_PA_OK) { - return 0; - } /*PA_OK ? */ - if (data == AFL_PA_ERR) { - STEN_LOW; - data = inb(DATA_PORT); - printk("### Error 1 aztcd: aztSeek\n"); - } - } - if (retry >= AZT_RETRY_ATTEMPTS) { - printk("### Error 2 aztcd: aztSeek\n "); - azt_error = 0xA5; - } - RETURNM("aztSeek", -1); -} - -/* Send a Set Disk Type command - does not seem to work with Aztech drives, behavior is completely indepen- - dent on which mode is set ??? -*/ -static int aztSetDiskType(int type) -{ - unsigned char data; - int retry; - -#ifdef AZT_DEBUG - printk("aztcd: set disk type command: type= %i\n", type); -#endif - for (retry = 0; retry < AZT_RETRY_ATTEMPTS; retry++) { - aztSendCmd(ACMD_SET_DISK_TYPE); - outb(type, CMD_PORT); - STEN_LOW; - data = inb(DATA_PORT); - if (data == AFL_PA_OK) { /*PA_OK ? */ - azt_read_mode = type; - return 0; - } - if (data == AFL_PA_ERR) { - STEN_LOW; - data = inb(DATA_PORT); - printk - ("### Error 1 aztcd: aztSetDiskType %x Error Code %x\n", - type, data); - } - } - if (retry >= AZT_RETRY_ATTEMPTS) { - printk("### Error 2 aztcd: aztSetDiskType %x\n ", type); - azt_error = 0xA5; - } - RETURNM("aztSetDiskType", -1); -} - - -/* used in azt_poll to poll the status, expects another program to issue a - * ACMD_GET_STATUS directly before - */ -static int aztStatus(void) -{ - int st; -/* int i; - - i = inb(STATUS_PORT) & AFL_STATUS; is STEN=0? ??? - if (!i) -*/ STEN_LOW; - if (aztTimeOutCount < AZT_TIMEOUT) { - st = inb(DATA_PORT) & 0xFF; - return st; - } else - RETURNM("aztStatus", -1); -} - -/* - * Get the drive status - */ -static int getAztStatus(void) -{ - int st; - - if (aztSendCmd(ACMD_GET_STATUS)) - RETURNM("getAztStatus 1", -1); - STEN_LOW; - st = inb(DATA_PORT) & 0xFF; -#ifdef AZT_DEBUG - printk("aztcd: Status = %x\n", st); -#endif - if ((st == 0xFF) || (st & AST_CMD_CHECK)) { - printk - ("aztcd: AST_CMD_CHECK error or no status available\n"); - return -1; - } - - if (((st & AST_MODE_BITS) != AST_BUSY) - && (aztAudioStatus == CDROM_AUDIO_PLAY)) - /* XXX might be an error? look at q-channel? */ - aztAudioStatus = CDROM_AUDIO_COMPLETED; - - if ((st & AST_DSK_CHG) || (st & AST_NOT_READY)) { - aztDiskChanged = 1; - aztTocUpToDate = 0; - aztAudioStatus = CDROM_AUDIO_NO_STATUS; - } - return st; -} - - -/* - * Send a 'Play' command and get the status. Use only from the top half. - */ -static int aztPlay(struct azt_Play_msf *arg) -{ - if (sendAztCmd(ACMD_PLAY_AUDIO, arg) < 0) - RETURNM("aztPlay", -1); - return 0; -} - -/* - * Subroutines to automatically close the door (tray) and - * lock it closed when the cd is mounted. Leave the tray - * locking as an option - */ -static void aztCloseDoor(void) -{ - aztSendCmd(ACMD_CLOSE); - STEN_LOW; - return; -} - -static void aztLockDoor(void) -{ -#if AZT_ALLOW_TRAY_LOCK - aztSendCmd(ACMD_LOCK); - STEN_LOW; -#endif - return; -} - -static void aztUnlockDoor(void) -{ -#if AZT_ALLOW_TRAY_LOCK - aztSendCmd(ACMD_UNLOCK); - STEN_LOW; -#endif - return; -} - -/* - * Read a value from the drive. Should return quickly, so a busy wait - * is used to avoid excessive rescheduling. The read command itself must - * be issued with aztSendCmd() directly before - */ -static int aztGetValue(unsigned char *result) -{ - int s; - - STEN_LOW; - if (aztTimeOutCount >= AZT_TIMEOUT) { - printk("aztcd: aztGetValue timeout\n"); - return -1; - } - s = inb(DATA_PORT) & 0xFF; - *result = (unsigned char) s; - return 0; -} - -/* - * Read the current Q-channel info. Also used for reading the - * table of contents. - */ -static int aztGetQChannelInfo(struct azt_Toc *qp) -{ - unsigned char notUsed; - int st; - -#ifdef AZT_DEBUG - printk("aztcd: starting aztGetQChannelInfo Time:%li\n", jiffies); -#endif - if ((st = getAztStatus()) == -1) - RETURNM("aztGetQChannelInfo 1", -1); - if (aztSendCmd(ACMD_GET_Q_CHANNEL)) - RETURNM("aztGetQChannelInfo 2", -1); - /*STEN_LOW_WAIT; ??? Dosemu0.60's cdrom.c does not like STEN_LOW_WAIT here */ - if (aztGetValue(¬Used)) - RETURNM("aztGetQChannelInfo 3", -1); /*??? Nullbyte einlesen */ - if ((st & AST_MODE_BITS) == AST_INITIAL) { - qp->ctrl_addr = 0; /* when audio stop ACMD_GET_Q_CHANNEL returns */ - qp->track = 0; /* only one byte with Aztech drives */ - qp->pointIndex = 0; - qp->trackTime.min = 0; - qp->trackTime.sec = 0; - qp->trackTime.frame = 0; - qp->diskTime.min = 0; - qp->diskTime.sec = 0; - qp->diskTime.frame = 0; - return 0; - } else { - if (aztGetValue(&qp->ctrl_addr) < 0) - RETURNM("aztGetQChannelInfo 4", -1); - if (aztGetValue(&qp->track) < 0) - RETURNM("aztGetQChannelInfo 4", -1); - if (aztGetValue(&qp->pointIndex) < 0) - RETURNM("aztGetQChannelInfo 4", -1); - if (aztGetValue(&qp->trackTime.min) < 0) - RETURNM("aztGetQChannelInfo 4", -1); - if (aztGetValue(&qp->trackTime.sec) < 0) - RETURNM("aztGetQChannelInfo 4", -1); - if (aztGetValue(&qp->trackTime.frame) < 0) - RETURNM("aztGetQChannelInfo 4", -1); - if (aztGetValue(¬Used) < 0) - RETURNM("aztGetQChannelInfo 4", -1); - if (aztGetValue(&qp->diskTime.min) < 0) - RETURNM("aztGetQChannelInfo 4", -1); - if (aztGetValue(&qp->diskTime.sec) < 0) - RETURNM("aztGetQChannelInfo 4", -1); - if (aztGetValue(&qp->diskTime.frame) < 0) - RETURNM("aztGetQChannelInfo 4", -1); - } -#ifdef AZT_DEBUG - printk("aztcd: exiting aztGetQChannelInfo Time:%li\n", jiffies); -#endif - return 0; -} - -/* - * Read the table of contents (TOC) and TOC header if necessary - */ -static int aztUpdateToc(void) -{ - int st; - -#ifdef AZT_DEBUG - printk("aztcd: starting aztUpdateToc Time:%li\n", jiffies); -#endif - if (aztTocUpToDate) - return 0; - - if (aztGetDiskInfo() < 0) - return -EIO; - - if (aztGetToc(0) < 0) - return -EIO; - - /*audio disk detection - with my Aztech drive there is no audio status bit, so I use the copy - protection bit of the first track. If this track is copy protected - (copy bit = 0), I assume, it's an audio disk. Strange, but works ??? */ - if (!(Toc[DiskInfo.first].ctrl_addr & 0x40)) - DiskInfo.audio = 1; - else - DiskInfo.audio = 0; - - /* XA detection */ - if (!DiskInfo.audio) { - azt_Play.start.min = 0; /*XA detection only seems to work */ - azt_Play.start.sec = 2; /*when we play a track */ - azt_Play.start.frame = 0; - azt_Play.end.min = 0; - azt_Play.end.sec = 0; - azt_Play.end.frame = 1; - if (sendAztCmd(ACMD_PLAY_READ, &azt_Play)) - return -1; - DTEN_LOW; - for (st = 0; st < CD_FRAMESIZE; st++) - inb(DATA_PORT); - } - DiskInfo.xa = getAztStatus() & AST_MODE; - if (DiskInfo.xa) { - printk - ("aztcd: XA support experimental - mail results to Werner.Zimmermann@fht-esslingen.de\n"); - } - - /*multisession detection - support for multisession CDs is done automatically with Aztech drives, - we don't have to take care about TOC redirection; if we want the isofs - to take care about redirection, we have to set AZT_MULTISESSION to 1 */ - DiskInfo.multi = 0; -#if AZT_MULTISESSION - if (DiskInfo.xa) { - aztGetMultiDiskInfo(); /*here Disk.Info.multi is set */ - } -#endif - if (DiskInfo.multi) { - DiskInfo.lastSession.min = Toc[DiskInfo.next].diskTime.min; - DiskInfo.lastSession.sec = Toc[DiskInfo.next].diskTime.sec; - DiskInfo.lastSession.frame = - Toc[DiskInfo.next].diskTime.frame; - printk("aztcd: Multisession support experimental\n"); - } else { - DiskInfo.lastSession.min = - Toc[DiskInfo.first].diskTime.min; - DiskInfo.lastSession.sec = - Toc[DiskInfo.first].diskTime.sec; - DiskInfo.lastSession.frame = - Toc[DiskInfo.first].diskTime.frame; - } - - aztTocUpToDate = 1; -#ifdef AZT_DEBUG - printk("aztcd: exiting aztUpdateToc Time:%li\n", jiffies); -#endif - return 0; -} - - -/* Read the table of contents header, i.e. no. of tracks and start of first - * track - */ -static int aztGetDiskInfo(void) -{ - int limit; - unsigned char test; - struct azt_Toc qInfo; - -#ifdef AZT_DEBUG - printk("aztcd: starting aztGetDiskInfo Time:%li\n", jiffies); -#endif - if (aztSendCmd(ACMD_SEEK_TO_LEADIN)) - RETURNM("aztGetDiskInfo 1", -1); - STEN_LOW_WAIT; - test = 0; - for (limit = 300; limit > 0; limit--) { - if (aztGetQChannelInfo(&qInfo) < 0) - RETURNM("aztGetDiskInfo 2", -1); - if (qInfo.pointIndex == 0xA0) { /*Number of FirstTrack */ - DiskInfo.first = qInfo.diskTime.min; - DiskInfo.first = azt_bcd2bin(DiskInfo.first); - test = test | 0x01; - } - if (qInfo.pointIndex == 0xA1) { /*Number of LastTrack */ - DiskInfo.last = qInfo.diskTime.min; - DiskInfo.last = azt_bcd2bin(DiskInfo.last); - test = test | 0x02; - } - if (qInfo.pointIndex == 0xA2) { /*DiskLength */ - DiskInfo.diskLength.min = qInfo.diskTime.min; - DiskInfo.diskLength.sec = qInfo.diskTime.sec; - DiskInfo.diskLength.frame = qInfo.diskTime.frame; - test = test | 0x04; - } - if ((qInfo.pointIndex == DiskInfo.first) && (test & 0x01)) { /*StartTime of First Track */ - DiskInfo.firstTrack.min = qInfo.diskTime.min; - DiskInfo.firstTrack.sec = qInfo.diskTime.sec; - DiskInfo.firstTrack.frame = qInfo.diskTime.frame; - test = test | 0x08; - } - if (test == 0x0F) - break; - } -#ifdef AZT_DEBUG - printk("aztcd: exiting aztGetDiskInfo Time:%li\n", jiffies); - printk - ("Disk Info: first %d last %d length %02X:%02X.%02X dez first %02X:%02X.%02X dez\n", - DiskInfo.first, DiskInfo.last, DiskInfo.diskLength.min, - DiskInfo.diskLength.sec, DiskInfo.diskLength.frame, - DiskInfo.firstTrack.min, DiskInfo.firstTrack.sec, - DiskInfo.firstTrack.frame); -#endif - if (test != 0x0F) - return -1; - return 0; -} - -#if AZT_MULTISESSION -/* - * Get Multisession Disk Info - */ -static int aztGetMultiDiskInfo(void) -{ - int limit, k = 5; - unsigned char test; - struct azt_Toc qInfo; - -#ifdef AZT_DEBUG - printk("aztcd: starting aztGetMultiDiskInfo\n"); -#endif - - do { - azt_Play.start.min = Toc[DiskInfo.last + 1].diskTime.min; - azt_Play.start.sec = Toc[DiskInfo.last + 1].diskTime.sec; - azt_Play.start.frame = - Toc[DiskInfo.last + 1].diskTime.frame; - test = 0; - - for (limit = 30; limit > 0; limit--) { /*Seek for LeadIn of next session */ - if (aztSeek(&azt_Play)) - RETURNM("aztGetMultiDiskInfo 1", -1); - if (aztGetQChannelInfo(&qInfo) < 0) - RETURNM("aztGetMultiDiskInfo 2", -1); - if ((qInfo.track == 0) && (qInfo.pointIndex)) - break; /*LeadIn found */ - if ((azt_Play.start.sec += 10) > 59) { - azt_Play.start.sec = 0; - azt_Play.start.min++; - } - } - if (!limit) - break; /*Check, if a leadin track was found, if not we're - at the end of the disk */ -#ifdef AZT_DEBUG_MULTISESSION - printk("leadin found track %d pointIndex %x limit %d\n", - qInfo.track, qInfo.pointIndex, limit); -#endif - for (limit = 300; limit > 0; limit--) { - if (++azt_Play.start.frame > 74) { - azt_Play.start.frame = 0; - if (azt_Play.start.sec > 59) { - azt_Play.start.sec = 0; - azt_Play.start.min++; - } - } - if (aztSeek(&azt_Play)) - RETURNM("aztGetMultiDiskInfo 3", -1); - if (aztGetQChannelInfo(&qInfo) < 0) - RETURNM("aztGetMultiDiskInfo 4", -1); - if (qInfo.pointIndex == 0xA0) { /*Number of NextTrack */ - DiskInfo.next = qInfo.diskTime.min; - DiskInfo.next = azt_bcd2bin(DiskInfo.next); - test = test | 0x01; - } - if (qInfo.pointIndex == 0xA1) { /*Number of LastTrack */ - DiskInfo.last = qInfo.diskTime.min; - DiskInfo.last = azt_bcd2bin(DiskInfo.last); - test = test | 0x02; - } - if (qInfo.pointIndex == 0xA2) { /*DiskLength */ - DiskInfo.diskLength.min = - qInfo.diskTime.min; - DiskInfo.diskLength.sec = - qInfo.diskTime.sec; - DiskInfo.diskLength.frame = - qInfo.diskTime.frame; - test = test | 0x04; - } - if ((qInfo.pointIndex == DiskInfo.next) && (test & 0x01)) { /*StartTime of Next Track */ - DiskInfo.nextSession.min = - qInfo.diskTime.min; - DiskInfo.nextSession.sec = - qInfo.diskTime.sec; - DiskInfo.nextSession.frame = - qInfo.diskTime.frame; - test = test | 0x08; - } - if (test == 0x0F) - break; - } -#ifdef AZT_DEBUG_MULTISESSION - printk - ("MultiDisk Info: first %d next %d last %d length %02x:%02x.%02x dez first %02x:%02x.%02x dez next %02x:%02x.%02x dez\n", - DiskInfo.first, DiskInfo.next, DiskInfo.last, - DiskInfo.diskLength.min, DiskInfo.diskLength.sec, - DiskInfo.diskLength.frame, DiskInfo.firstTrack.min, - DiskInfo.firstTrack.sec, DiskInfo.firstTrack.frame, - DiskInfo.nextSession.min, DiskInfo.nextSession.sec, - DiskInfo.nextSession.frame); -#endif - if (test != 0x0F) - break; - else - DiskInfo.multi = 1; /*found TOC of more than one session */ - aztGetToc(1); - } while (--k); - -#ifdef AZT_DEBUG - printk("aztcd: exiting aztGetMultiDiskInfo Time:%li\n", jiffies); -#endif - return 0; -} -#endif - -/* - * Read the table of contents (TOC) - */ -static int aztGetToc(int multi) -{ - int i, px; - int limit; - struct azt_Toc qInfo; - -#ifdef AZT_DEBUG - printk("aztcd: starting aztGetToc Time:%li\n", jiffies); -#endif - if (!multi) { - for (i = 0; i < MAX_TRACKS; i++) - Toc[i].pointIndex = 0; - i = DiskInfo.last + 3; - } else { - for (i = DiskInfo.next; i < MAX_TRACKS; i++) - Toc[i].pointIndex = 0; - i = DiskInfo.last + 4 - DiskInfo.next; - } - -/*Is there a good reason to stop motor before TOC read? - if (aztSendCmd(ACMD_STOP)) RETURNM("aztGetToc 1",-1); - STEN_LOW_WAIT; -*/ - - if (!multi) { - azt_mode = 0x05; - if (aztSendCmd(ACMD_SEEK_TO_LEADIN)) - RETURNM("aztGetToc 2", -1); - STEN_LOW_WAIT; - } - for (limit = 300; limit > 0; limit--) { - if (multi) { - if (++azt_Play.start.sec > 59) { - azt_Play.start.sec = 0; - azt_Play.start.min++; - } - if (aztSeek(&azt_Play)) - RETURNM("aztGetToc 3", -1); - } - if (aztGetQChannelInfo(&qInfo) < 0) - break; - - px = azt_bcd2bin(qInfo.pointIndex); - - if (px > 0 && px < MAX_TRACKS && qInfo.track == 0) - if (Toc[px].pointIndex == 0) { - Toc[px] = qInfo; - i--; - } - - if (i <= 0) - break; - } - - Toc[DiskInfo.last + 1].diskTime = DiskInfo.diskLength; - Toc[DiskInfo.last].trackTime = DiskInfo.diskLength; - -#ifdef AZT_DEBUG_MULTISESSION - printk("aztcd: exiting aztGetToc\n"); - for (i = 1; i <= DiskInfo.last + 1; i++) - printk - ("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X dez %02X:%02X.%02X dez\n", - i, Toc[i].ctrl_addr, Toc[i].track, Toc[i].pointIndex, - Toc[i].trackTime.min, Toc[i].trackTime.sec, - Toc[i].trackTime.frame, Toc[i].diskTime.min, - Toc[i].diskTime.sec, Toc[i].diskTime.frame); - for (i = 100; i < 103; i++) - printk - ("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X dez %02X:%02X.%02X dez\n", - i, Toc[i].ctrl_addr, Toc[i].track, Toc[i].pointIndex, - Toc[i].trackTime.min, Toc[i].trackTime.sec, - Toc[i].trackTime.frame, Toc[i].diskTime.min, - Toc[i].diskTime.sec, Toc[i].diskTime.frame); -#endif - - return limit > 0 ? 0 : -1; -} - - -/*########################################################################## - Kernel Interface Functions - ########################################################################## -*/ - -#ifndef MODULE -static int __init aztcd_setup(char *str) -{ - int ints[4]; - - (void) get_options(str, ARRAY_SIZE(ints), ints); - - if (ints[0] > 0) - azt_port = ints[1]; - if (ints[1] > 1) - azt_cont = ints[2]; - return 1; -} - -__setup("aztcd=", aztcd_setup); - -#endif /* !MODULE */ - -/* - * Checking if the media has been changed -*/ -static int check_aztcd_media_change(struct gendisk *disk) -{ - if (aztDiskChanged) { /* disk changed */ - aztDiskChanged = 0; - return 1; - } else - return 0; /* no change */ -} - -/* - * Kernel IO-controls -*/ -static int aztcd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd, - unsigned long arg) -{ - int i; - struct azt_Toc qInfo; - struct cdrom_ti ti; - struct cdrom_tochdr tocHdr; - struct cdrom_msf msf; - struct cdrom_tocentry entry; - struct azt_Toc *tocPtr; - struct cdrom_subchnl subchnl; - struct cdrom_volctrl volctrl; - void __user *argp = (void __user *)arg; - -#ifdef AZT_DEBUG - printk("aztcd: starting aztcd_ioctl - Command:%x Time: %li\n", - cmd, jiffies); - printk("aztcd Status %x\n", getAztStatus()); -#endif - if (!ip) - RETURNM("aztcd_ioctl 1", -EINVAL); - if (getAztStatus() < 0) - RETURNM("aztcd_ioctl 2", -EIO); - if ((!aztTocUpToDate) || (aztDiskChanged)) { - if ((i = aztUpdateToc()) < 0) - RETURNM("aztcd_ioctl 3", i); /* error reading TOC */ - } - - switch (cmd) { - case CDROMSTART: /* Spin up the drive. Don't know, what to do, - at least close the tray */ -#if AZT_PRIVATE_IOCTLS - if (aztSendCmd(ACMD_CLOSE)) - RETURNM("aztcd_ioctl 4", -1); - STEN_LOW_WAIT; -#endif - break; - case CDROMSTOP: /* Spin down the drive */ - if (aztSendCmd(ACMD_STOP)) - RETURNM("aztcd_ioctl 5", -1); - STEN_LOW_WAIT; - /* should we do anything if it fails? */ - aztAudioStatus = CDROM_AUDIO_NO_STATUS; - break; - case CDROMPAUSE: /* Pause the drive */ - if (aztAudioStatus != CDROM_AUDIO_PLAY) - return -EINVAL; - - if (aztGetQChannelInfo(&qInfo) < 0) { /* didn't get q channel info */ - aztAudioStatus = CDROM_AUDIO_NO_STATUS; - RETURNM("aztcd_ioctl 7", 0); - } - azt_Play.start = qInfo.diskTime; /* remember restart point */ - - if (aztSendCmd(ACMD_PAUSE)) - RETURNM("aztcd_ioctl 8", -1); - STEN_LOW_WAIT; - aztAudioStatus = CDROM_AUDIO_PAUSED; - break; - case CDROMRESUME: /* Play it again, Sam */ - if (aztAudioStatus != CDROM_AUDIO_PAUSED) - return -EINVAL; - /* restart the drive at the saved position. */ - i = aztPlay(&azt_Play); - if (i < 0) { - aztAudioStatus = CDROM_AUDIO_ERROR; - return -EIO; - } - aztAudioStatus = CDROM_AUDIO_PLAY; - break; - case CDROMMULTISESSION: /*multisession support -- experimental */ - { - struct cdrom_multisession ms; -#ifdef AZT_DEBUG - printk("aztcd ioctl MULTISESSION\n"); -#endif - if (copy_from_user(&ms, argp, - sizeof(struct cdrom_multisession))) - return -EFAULT; - if (ms.addr_format == CDROM_MSF) { - ms.addr.msf.minute = - azt_bcd2bin(DiskInfo.lastSession.min); - ms.addr.msf.second = - azt_bcd2bin(DiskInfo.lastSession.sec); - ms.addr.msf.frame = - azt_bcd2bin(DiskInfo.lastSession. - frame); - } else if (ms.addr_format == CDROM_LBA) - ms.addr.lba = - azt_msf2hsg(&DiskInfo.lastSession); - else - return -EINVAL; - ms.xa_flag = DiskInfo.xa; - if (copy_to_user(argp, &ms, - sizeof(struct cdrom_multisession))) - return -EFAULT; -#ifdef AZT_DEBUG - if (ms.addr_format == CDROM_MSF) - printk - ("aztcd multisession xa:%d, msf:%02x:%02x.%02x [%02x:%02x.%02x])\n", - ms.xa_flag, ms.addr.msf.minute, - ms.addr.msf.second, ms.addr.msf.frame, - DiskInfo.lastSession.min, - DiskInfo.lastSession.sec, - DiskInfo.lastSession.frame); - else - printk - ("aztcd multisession %d, lba:0x%08x [%02x:%02x.%02x])\n", - ms.xa_flag, ms.addr.lba, - DiskInfo.lastSession.min, - DiskInfo.lastSession.sec, - DiskInfo.lastSession.frame); -#endif - return 0; - } - case CDROMPLAYTRKIND: /* Play a track. This currently ignores index. */ - if (copy_from_user(&ti, argp, sizeof ti)) - return -EFAULT; - if (ti.cdti_trk0 < DiskInfo.first - || ti.cdti_trk0 > DiskInfo.last - || ti.cdti_trk1 < ti.cdti_trk0) { - return -EINVAL; - } - if (ti.cdti_trk1 > DiskInfo.last) - ti.cdti_trk1 = DiskInfo.last; - azt_Play.start = Toc[ti.cdti_trk0].diskTime; - azt_Play.end = Toc[ti.cdti_trk1 + 1].diskTime; -#ifdef AZT_DEBUG - printk("aztcd play: %02x:%02x.%02x to %02x:%02x.%02x\n", - azt_Play.start.min, azt_Play.start.sec, - azt_Play.start.frame, azt_Play.end.min, - azt_Play.end.sec, azt_Play.end.frame); -#endif - i = aztPlay(&azt_Play); - if (i < 0) { - aztAudioStatus = CDROM_AUDIO_ERROR; - return -EIO; - } - aztAudioStatus = CDROM_AUDIO_PLAY; - break; - case CDROMPLAYMSF: /* Play starting at the given MSF address. */ -/* if (aztAudioStatus == CDROM_AUDIO_PLAY) - { if (aztSendCmd(ACMD_STOP)) RETURNM("aztcd_ioctl 9",-1); - STEN_LOW; - aztAudioStatus = CDROM_AUDIO_NO_STATUS; - } -*/ - if (copy_from_user(&msf, argp, sizeof msf)) - return -EFAULT; - /* convert to bcd */ - azt_bin2bcd(&msf.cdmsf_min0); - azt_bin2bcd(&msf.cdmsf_sec0); - azt_bin2bcd(&msf.cdmsf_frame0); - azt_bin2bcd(&msf.cdmsf_min1); - azt_bin2bcd(&msf.cdmsf_sec1); - azt_bin2bcd(&msf.cdmsf_frame1); - azt_Play.start.min = msf.cdmsf_min0; - azt_Play.start.sec = msf.cdmsf_sec0; - azt_Play.start.frame = msf.cdmsf_frame0; - azt_Play.end.min = msf.cdmsf_min1; - azt_Play.end.sec = msf.cdmsf_sec1; - azt_Play.end.frame = msf.cdmsf_frame1; -#ifdef AZT_DEBUG - printk("aztcd play: %02x:%02x.%02x to %02x:%02x.%02x\n", - azt_Play.start.min, azt_Play.start.sec, - azt_Play.start.frame, azt_Play.end.min, - azt_Play.end.sec, azt_Play.end.frame); -#endif - i = aztPlay(&azt_Play); - if (i < 0) { - aztAudioStatus = CDROM_AUDIO_ERROR; - return -EIO; - } - aztAudioStatus = CDROM_AUDIO_PLAY; - break; - - case CDROMREADTOCHDR: /* Read the table of contents header */ - tocHdr.cdth_trk0 = DiskInfo.first; - tocHdr.cdth_trk1 = DiskInfo.last; - if (copy_to_user(argp, &tocHdr, sizeof tocHdr)) - return -EFAULT; - break; - case CDROMREADTOCENTRY: /* Read an entry in the table of contents */ - if (copy_from_user(&entry, argp, sizeof entry)) - return -EFAULT; - if ((!aztTocUpToDate) || aztDiskChanged) - aztUpdateToc(); - if (entry.cdte_track == CDROM_LEADOUT) - tocPtr = &Toc[DiskInfo.last + 1]; - else if (entry.cdte_track > DiskInfo.last - || entry.cdte_track < DiskInfo.first) { - return -EINVAL; - } else - tocPtr = &Toc[entry.cdte_track]; - entry.cdte_adr = tocPtr->ctrl_addr; - entry.cdte_ctrl = tocPtr->ctrl_addr >> 4; - if (entry.cdte_format == CDROM_LBA) - entry.cdte_addr.lba = - azt_msf2hsg(&tocPtr->diskTime); - else if (entry.cdte_format == CDROM_MSF) { - entry.cdte_addr.msf.minute = - azt_bcd2bin(tocPtr->diskTime.min); - entry.cdte_addr.msf.second = - azt_bcd2bin(tocPtr->diskTime.sec); - entry.cdte_addr.msf.frame = - azt_bcd2bin(tocPtr->diskTime.frame); - } else { - return -EINVAL; - } - if (copy_to_user(argp, &entry, sizeof entry)) - return -EFAULT; - break; - case CDROMSUBCHNL: /* Get subchannel info */ - if (copy_from_user - (&subchnl, argp, sizeof(struct cdrom_subchnl))) - return -EFAULT; - if (aztGetQChannelInfo(&qInfo) < 0) { -#ifdef AZT_DEBUG - printk - ("aztcd: exiting aztcd_ioctl - Error 3 - Command:%x\n", - cmd); -#endif - return -EIO; - } - subchnl.cdsc_audiostatus = aztAudioStatus; - subchnl.cdsc_adr = qInfo.ctrl_addr; - subchnl.cdsc_ctrl = qInfo.ctrl_addr >> 4; - subchnl.cdsc_trk = azt_bcd2bin(qInfo.track); - subchnl.cdsc_ind = azt_bcd2bin(qInfo.pointIndex); - if (subchnl.cdsc_format == CDROM_LBA) { - subchnl.cdsc_absaddr.lba = - azt_msf2hsg(&qInfo.diskTime); - subchnl.cdsc_reladdr.lba = - azt_msf2hsg(&qInfo.trackTime); - } else { /*default */ - subchnl.cdsc_format = CDROM_MSF; - subchnl.cdsc_absaddr.msf.minute = - azt_bcd2bin(qInfo.diskTime.min); - subchnl.cdsc_absaddr.msf.second = - azt_bcd2bin(qInfo.diskTime.sec); - subchnl.cdsc_absaddr.msf.frame = - azt_bcd2bin(qInfo.diskTime.frame); - subchnl.cdsc_reladdr.msf.minute = - azt_bcd2bin(qInfo.trackTime.min); - subchnl.cdsc_reladdr.msf.second = - azt_bcd2bin(qInfo.trackTime.sec); - subchnl.cdsc_reladdr.msf.frame = - azt_bcd2bin(qInfo.trackTime.frame); - } - if (copy_to_user(argp, &subchnl, sizeof(struct cdrom_subchnl))) - return -EFAULT; - break; - case CDROMVOLCTRL: /* Volume control - * With my Aztech CD268-01A volume control does not work, I can only - turn the channels on (any value !=0) or off (value==0). Maybe it - works better with your drive */ - if (copy_from_user(&volctrl, argp, sizeof(volctrl))) - return -EFAULT; - azt_Play.start.min = 0x21; - azt_Play.start.sec = 0x84; - azt_Play.start.frame = volctrl.channel0; - azt_Play.end.min = volctrl.channel1; - azt_Play.end.sec = volctrl.channel2; - azt_Play.end.frame = volctrl.channel3; - sendAztCmd(ACMD_SET_VOLUME, &azt_Play); - STEN_LOW_WAIT; - break; - case CDROMEJECT: - aztUnlockDoor(); /* Assume user knows what they're doing */ - /* all drives can at least stop! */ - if (aztAudioStatus == CDROM_AUDIO_PLAY) { - if (aztSendCmd(ACMD_STOP)) - RETURNM("azt_ioctl 10", -1); - STEN_LOW_WAIT; - } - if (aztSendCmd(ACMD_EJECT)) - RETURNM("azt_ioctl 11", -1); - STEN_LOW_WAIT; - aztAudioStatus = CDROM_AUDIO_NO_STATUS; - break; - case CDROMEJECT_SW: - azt_auto_eject = (char) arg; - break; - case CDROMRESET: - outb(ACMD_SOFT_RESET, CMD_PORT); /*send reset */ - STEN_LOW; - if (inb(DATA_PORT) != AFL_OP_OK) { /*OP_OK? */ - printk - ("aztcd: AZTECH CD-ROM drive does not respond\n"); - } - break; -/*Take care, the following code is not compatible with other CD-ROM drivers, - use it at your own risk with cdplay.c. Set AZT_PRIVATE_IOCTLS to 0 in aztcd.h, - if you do not want to use it! -*/ -#if AZT_PRIVATE_IOCTLS - case CDROMREADCOOKED: /*read data in mode 1 (2048 Bytes) */ - case CDROMREADRAW: /*read data in mode 2 (2336 Bytes) */ - { - if (copy_from_user(&msf, argp, sizeof msf)) - return -EFAULT; - /* convert to bcd */ - azt_bin2bcd(&msf.cdmsf_min0); - azt_bin2bcd(&msf.cdmsf_sec0); - azt_bin2bcd(&msf.cdmsf_frame0); - msf.cdmsf_min1 = 0; - msf.cdmsf_sec1 = 0; - msf.cdmsf_frame1 = 1; /*read only one frame */ - azt_Play.start.min = msf.cdmsf_min0; - azt_Play.start.sec = msf.cdmsf_sec0; - azt_Play.start.frame = msf.cdmsf_frame0; - azt_Play.end.min = msf.cdmsf_min1; - azt_Play.end.sec = msf.cdmsf_sec1; - azt_Play.end.frame = msf.cdmsf_frame1; - if (cmd == CDROMREADRAW) { - if (DiskInfo.xa) { - return -1; /*XA Disks can't be read raw */ - } else { - if (sendAztCmd(ACMD_PLAY_READ_RAW, &azt_Play)) - return -1; - DTEN_LOW; - insb(DATA_PORT, buf, CD_FRAMESIZE_RAW); - if (copy_to_user(argp, &buf, CD_FRAMESIZE_RAW)) - return -EFAULT; - } - } else - /*CDROMREADCOOKED*/ { - if (sendAztCmd(ACMD_PLAY_READ, &azt_Play)) - return -1; - DTEN_LOW; - insb(DATA_PORT, buf, CD_FRAMESIZE); - if (copy_to_user(argp, &buf, CD_FRAMESIZE)) - return -EFAULT; - } - } - break; - case CDROMSEEK: /*seek msf address */ - if (copy_from_user(&msf, argp, sizeof msf)) - return -EFAULT; - /* convert to bcd */ - azt_bin2bcd(&msf.cdmsf_min0); - azt_bin2bcd(&msf.cdmsf_sec0); - azt_bin2bcd(&msf.cdmsf_frame0); - azt_Play.start.min = msf.cdmsf_min0; - azt_Play.start.sec = msf.cdmsf_sec0; - azt_Play.start.frame = msf.cdmsf_frame0; - if (aztSeek(&azt_Play)) - return -1; - break; -#endif /*end of incompatible code */ - case CDROMREADMODE1: /*set read data in mode 1 */ - return aztSetDiskType(AZT_MODE_1); - case CDROMREADMODE2: /*set read data in mode 2 */ - return aztSetDiskType(AZT_MODE_2); - default: - return -EINVAL; - } -#ifdef AZT_DEBUG - printk("aztcd: exiting aztcd_ioctl Command:%x Time:%li\n", cmd, - jiffies); -#endif - return 0; -} - -/* - * Take care of the different block sizes between cdrom and Linux. - * When Linux gets variable block sizes this will probably go away. - */ -static void azt_transfer(void) -{ -#ifdef AZT_TEST - printk("aztcd: executing azt_transfer Time:%li\n", jiffies); -#endif - if (!current_valid()) - return; - - while (CURRENT->nr_sectors) { - int bn = CURRENT->sector / 4; - int i; - for (i = 0; i < AZT_BUF_SIZ && azt_buf_bn[i] != bn; ++i); - if (i < AZT_BUF_SIZ) { - int offs = (i * 4 + (CURRENT->sector & 3)) * 512; - int nr_sectors = 4 - (CURRENT->sector & 3); - if (azt_buf_out != i) { - azt_buf_out = i; - if (azt_buf_bn[i] != bn) { - azt_buf_out = -1; - continue; - } - } - if (nr_sectors > CURRENT->nr_sectors) - nr_sectors = CURRENT->nr_sectors; - memcpy(CURRENT->buffer, azt_buf + offs, - nr_sectors * 512); - CURRENT->nr_sectors -= nr_sectors; - CURRENT->sector += nr_sectors; - CURRENT->buffer += nr_sectors * 512; - } else { - azt_buf_out = -1; - break; - } - } -} - -static void do_aztcd_request(request_queue_t * q) -{ -#ifdef AZT_TEST - printk(" do_aztcd_request(%ld+%ld) Time:%li\n", CURRENT->sector, - CURRENT->nr_sectors, jiffies); -#endif - if (DiskInfo.audio) { - printk("aztcd: Error, tried to mount an Audio CD\n"); - end_request(CURRENT, 0); - return; - } - azt_transfer_is_active = 1; - while (current_valid()) { - azt_transfer(); - if (CURRENT->nr_sectors == 0) { - end_request(CURRENT, 1); - } else { - azt_buf_out = -1; /* Want to read a block not in buffer */ - if (azt_state == AZT_S_IDLE) { - if ((!aztTocUpToDate) || aztDiskChanged) { - if (aztUpdateToc() < 0) { - while (current_valid()) - end_request(CURRENT, 0); - break; - } - } - azt_state = AZT_S_START; - AztTries = 5; - SET_TIMER(azt_poll, HZ / 100); - } - break; - } - } - azt_transfer_is_active = 0; -#ifdef AZT_TEST2 - printk - ("azt_next_bn:%x azt_buf_in:%x azt_buf_out:%x azt_buf_bn:%x\n", - azt_next_bn, azt_buf_in, azt_buf_out, azt_buf_bn[azt_buf_in]); - printk(" do_aztcd_request ends Time:%li\n", jiffies); -#endif -} - - -static void azt_invalidate_buffers(void) -{ - int i; - -#ifdef AZT_DEBUG - printk("aztcd: executing azt_invalidate_buffers\n"); -#endif - for (i = 0; i < AZT_BUF_SIZ; ++i) - azt_buf_bn[i] = -1; - azt_buf_out = -1; -} - -/* - * Open the device special file. Check that a disk is in. - */ -static int aztcd_open(struct inode *ip, struct file *fp) -{ - int st; - -#ifdef AZT_DEBUG - printk("aztcd: starting aztcd_open\n"); -#endif - - if (aztPresent == 0) - return -ENXIO; /* no hardware */ - - if (!azt_open_count && azt_state == AZT_S_IDLE) { - azt_invalidate_buffers(); - - st = getAztStatus(); /* check drive status */ - if (st == -1) - goto err_out; /* drive doesn't respond */ - - if (st & AST_DOOR_OPEN) { /* close door, then get the status again. */ - printk("aztcd: Door Open?\n"); - aztCloseDoor(); - st = getAztStatus(); - } - - if ((st & AST_NOT_READY) || (st & AST_DSK_CHG)) { /*no disk in drive or changed */ - printk - ("aztcd: Disk Changed or No Disk in Drive?\n"); - aztTocUpToDate = 0; - } - if (aztUpdateToc()) - goto err_out; - - } - ++azt_open_count; - aztLockDoor(); - -#ifdef AZT_DEBUG - printk("aztcd: exiting aztcd_open\n"); -#endif - return 0; - - err_out: - return -EIO; -} - - -/* - * On close, we flush all azt blocks from the buffer cache. - */ -static int aztcd_release(struct inode *inode, struct file *file) -{ -#ifdef AZT_DEBUG - printk("aztcd: executing aztcd_release\n"); - printk("inode: %p, device: %s file: %p\n", inode, - inode->i_bdev->bd_disk->disk_name, file); -#endif - if (!--azt_open_count) { - azt_invalidate_buffers(); - aztUnlockDoor(); - if (azt_auto_eject) - aztSendCmd(ACMD_EJECT); - CLEAR_TIMER; - } - return 0; -} - -static struct gendisk *azt_disk; - -/* - * Test for presence of drive and initialize it. Called at boot time. - */ - -static int __init aztcd_init(void) -{ - long int count, max_count; - unsigned char result[50]; - int st; - void* status = NULL; - int i = 0; - int ret = 0; - - if (azt_port == 0) { - printk(KERN_INFO "aztcd: no Aztech CD-ROM Initialization"); - return -EIO; - } - - printk(KERN_INFO "aztcd: AZTECH, ORCHID, OKANO, WEARNES, TXC, CyDROM " - "CD-ROM Driver\n"); - printk(KERN_INFO "aztcd: (C) 1994-98 W.Zimmermann\n"); - if (azt_port == -1) { - printk - ("aztcd: DriverVersion=%s For IDE/ATAPI-drives use ide-cd.c\n", - AZT_VERSION); - } else - printk - ("aztcd: DriverVersion=%s BaseAddress=0x%x For IDE/ATAPI-drives use ide-cd.c\n", - AZT_VERSION, azt_port); - printk(KERN_INFO "aztcd: If you have problems, read /usr/src/linux/" - "Documentation/cdrom/aztcd\n"); - - -#ifdef AZT_SW32 /*CDROM connected to Soundwave32 card */ - if ((0xFF00 & inw(AZT_SW32_ID_REG)) != 0x4500) { - printk - ("aztcd: no Soundwave32 card detected at base:%x init:%x config:%x id:%x\n", - AZT_SW32_BASE_ADDR, AZT_SW32_INIT, - AZT_SW32_CONFIG_REG, AZT_SW32_ID_REG); - return -EIO; - } else { - printk(KERN_INFO - "aztcd: Soundwave32 card detected at %x Version %x\n", - AZT_SW32_BASE_ADDR, inw(AZT_SW32_ID_REG)); - outw(AZT_SW32_INIT, AZT_SW32_CONFIG_REG); - for (count = 0; count < 10000; count++); /*delay a bit */ - } -#endif - - /* check for presence of drive */ - - if (azt_port == -1) { /* autoprobing for proprietary interface */ - for (i = 0; (azt_port_auto[i] != 0) && (i < 16); i++) { - azt_port = azt_port_auto[i]; - printk(KERN_INFO "aztcd: Autoprobing BaseAddress=0x%x" - "\n", azt_port); - /*proprietary interfaces need 4 bytes */ - if (!request_region(azt_port, 4, "aztcd")) { - continue; - } - outb(POLLED, MODE_PORT); - inb(CMD_PORT); - inb(CMD_PORT); - outb(ACMD_GET_VERSION, CMD_PORT); /*Try to get version info */ - - aztTimeOutCount = 0; - do { - aztIndatum = inb(STATUS_PORT); - aztTimeOutCount++; - if (aztTimeOutCount >= AZT_FAST_TIMEOUT) - break; - } while (aztIndatum & AFL_STATUS); - if (inb(DATA_PORT) == AFL_OP_OK) { /* OK drive found */ - break; - } - else { /* Drive not found on this port - try next one */ - release_region(azt_port, 4); - } - } - if ((i == 16) || (azt_port_auto[i] == 0)) { - printk(KERN_INFO "aztcd: no AZTECH CD-ROM drive found\n"); - return -EIO; - } - } else { /* no autoprobing */ - if ((azt_port == 0x1f0) || (azt_port == 0x170)) - status = request_region(azt_port, 8, "aztcd"); /*IDE-interfaces need 8 bytes */ - else - status = request_region(azt_port, 4, "aztcd"); /*proprietary interfaces need 4 bytes */ - if (!status) { - printk(KERN_WARNING "aztcd: conflict, I/O port (%X) " - "already used\n", azt_port); - return -EIO; - } - - if ((azt_port == 0x1f0) || (azt_port == 0x170)) - SWITCH_IDE_SLAVE; /*switch IDE interface to slave configuration */ - - outb(POLLED, MODE_PORT); - inb(CMD_PORT); - inb(CMD_PORT); - outb(ACMD_GET_VERSION, CMD_PORT); /*Try to get version info */ - - aztTimeOutCount = 0; - do { - aztIndatum = inb(STATUS_PORT); - aztTimeOutCount++; - if (aztTimeOutCount >= AZT_FAST_TIMEOUT) - break; - } while (aztIndatum & AFL_STATUS); - - if (inb(DATA_PORT) != AFL_OP_OK) { /*OP_OK? If not, reset and try again */ -#ifndef MODULE - if (azt_cont != 0x79) { - printk(KERN_WARNING "aztcd: no AZTECH CD-ROM " - "drive found-Try boot parameter aztcd=" - "<BaseAddress>,0x79\n"); - ret = -EIO; - goto err_out; - } -#else - if (0) { - } -#endif - else { - printk(KERN_INFO "aztcd: drive reset - " - "please wait\n"); - for (count = 0; count < 50; count++) { - inb(STATUS_PORT); /*removing all data from earlier tries */ - inb(DATA_PORT); - } - outb(POLLED, MODE_PORT); - inb(CMD_PORT); - inb(CMD_PORT); - getAztStatus(); /*trap errors */ - outb(ACMD_SOFT_RESET, CMD_PORT); /*send reset */ - STEN_LOW; - if (inb(DATA_PORT) != AFL_OP_OK) { /*OP_OK? */ - printk(KERN_WARNING "aztcd: no AZTECH " - "CD-ROM drive found\n"); - ret = -EIO; - goto err_out; - } - - for (count = 0; count < AZT_TIMEOUT; - count++) - barrier(); /* Stop gcc 2.96 being smart */ - /* use udelay(), damnit -- AV */ - - if ((st = getAztStatus()) == -1) { - printk(KERN_WARNING "aztcd: Drive Status" - " Error Status=%x\n", st); - ret = -EIO; - goto err_out; - } -#ifdef AZT_DEBUG - printk(KERN_DEBUG "aztcd: Status = %x\n", st); -#endif - outb(POLLED, MODE_PORT); - inb(CMD_PORT); - inb(CMD_PORT); - outb(ACMD_GET_VERSION, CMD_PORT); /*GetVersion */ - STEN_LOW; - OP_OK; - } - } - } - - azt_init_end = 1; - STEN_LOW; - result[0] = inb(DATA_PORT); /*reading in a null byte??? */ - for (count = 1; count < 50; count++) { /*Reading version string */ - aztTimeOutCount = 0; /*here we must implement STEN_LOW differently */ - do { - aztIndatum = inb(STATUS_PORT); /*because we want to exit by timeout */ - aztTimeOutCount++; - if (aztTimeOutCount >= AZT_FAST_TIMEOUT) - break; - } while (aztIndatum & AFL_STATUS); - if (aztTimeOutCount >= AZT_FAST_TIMEOUT) - break; /*all chars read? */ - result[count] = inb(DATA_PORT); - } - if (count > 30) - max_count = 30; /*print max.30 chars of the version string */ - else - max_count = count; - printk(KERN_INFO "aztcd: FirmwareVersion="); - for (count = 1; count < max_count; count++) - printk("%c", result[count]); - printk("<<>> "); - - if ((result[1] == 'A') && (result[2] == 'Z') && (result[3] == 'T')) { - printk("AZTECH drive detected\n"); - /*AZTECH*/} - else if ((result[2] == 'C') && (result[3] == 'D') - && (result[4] == 'D')) { - printk("ORCHID or WEARNES drive detected\n"); /*ORCHID or WEARNES */ - } else if ((result[1] == 0x03) && (result[2] == '5')) { - printk("TXC or CyCDROM drive detected\n"); /*Conrad TXC, CyCDROM */ - } else { /*OTHERS or none */ - printk("\nunknown drive or firmware version detected\n"); - printk - ("aztcd may not run stable, if you want to try anyhow,\n"); - printk("boot with: aztcd=<BaseAddress>,0x79\n"); - if ((azt_cont != 0x79)) { - printk("aztcd: FirmwareVersion="); - for (count = 1; count < 5; count++) - printk("%c", result[count]); - printk("<<>> "); - printk("Aborted\n"); - ret = -EIO; - goto err_out; - } - } - azt_disk = alloc_disk(1); - if (!azt_disk) - goto err_out; - - if (register_blkdev(MAJOR_NR, "aztcd")) { - ret = -EIO; - goto err_out2; - } - - azt_queue = blk_init_queue(do_aztcd_request, &aztSpin); - if (!azt_queue) { - ret = -ENOMEM; - goto err_out3; - } - - blk_queue_hardsect_size(azt_queue, 2048); - azt_disk->major = MAJOR_NR; - azt_disk->first_minor = 0; - azt_disk->fops = &azt_fops; - sprintf(azt_disk->disk_name, "aztcd"); - azt_disk->queue = azt_queue; - add_disk(azt_disk); - azt_invalidate_buffers(); - aztPresent = 1; - aztCloseDoor(); - return 0; -err_out3: - unregister_blkdev(MAJOR_NR, "aztcd"); -err_out2: - put_disk(azt_disk); -err_out: - if ((azt_port == 0x1f0) || (azt_port == 0x170)) { - SWITCH_IDE_MASTER; - release_region(azt_port, 8); /*IDE-interface */ - } else - release_region(azt_port, 4); /*proprietary interface */ - return ret; - -} - -static void __exit aztcd_exit(void) -{ - del_gendisk(azt_disk); - put_disk(azt_disk); - if ((unregister_blkdev(MAJOR_NR, "aztcd") == -EINVAL)) { - printk("What's that: can't unregister aztcd\n"); - return; - } - blk_cleanup_queue(azt_queue); - if ((azt_port == 0x1f0) || (azt_port == 0x170)) { - SWITCH_IDE_MASTER; - release_region(azt_port, 8); /*IDE-interface */ - } else - release_region(azt_port, 4); /*proprietary interface */ - printk(KERN_INFO "aztcd module released.\n"); -} - -module_init(aztcd_init); -module_exit(aztcd_exit); - -/*########################################################################## - Aztcd State Machine: Controls Drive Operating State - ########################################################################## -*/ -static void azt_poll(void) -{ - int st = 0; - int loop_ctl = 1; - int skip = 0; - - if (azt_error) { - if (aztSendCmd(ACMD_GET_ERROR)) - RETURN("azt_poll 1"); - STEN_LOW; - azt_error = inb(DATA_PORT) & 0xFF; - printk("aztcd: I/O error 0x%02x\n", azt_error); - azt_invalidate_buffers(); -#ifdef WARN_IF_READ_FAILURE - if (AztTries == 5) - printk - ("aztcd: Read of Block %d Failed - Maybe Audio Disk?\n", - azt_next_bn); -#endif - if (!AztTries--) { - printk - ("aztcd: Read of Block %d Failed, Maybe Audio Disk? Giving up\n", - azt_next_bn); - if (azt_transfer_is_active) { - AztTries = 0; - loop_ctl = 0; - } - if (current_valid()) - end_request(CURRENT, 0); - AztTries = 5; - } - azt_error = 0; - azt_state = AZT_S_STOP; - } - - while (loop_ctl) { - loop_ctl = 0; /* each case must flip this back to 1 if we want - to come back up here */ - switch (azt_state) { - - case AZT_S_IDLE: -#ifdef AZT_TEST3 - if (azt_state != azt_state_old) { - azt_state_old = azt_state; - printk("AZT_S_IDLE\n"); - } -#endif - return; - - case AZT_S_START: -#ifdef AZT_TEST3 - if (azt_state != azt_state_old) { - azt_state_old = azt_state; - printk("AZT_S_START\n"); - } -#endif - if (aztSendCmd(ACMD_GET_STATUS)) - RETURN("azt_poll 2"); /*result will be checked by aztStatus() */ - azt_state = - azt_mode == 1 ? AZT_S_READ : AZT_S_MODE; - AztTimeout = 3000; - break; - - case AZT_S_MODE: -#ifdef AZT_TEST3 - if (azt_state != azt_state_old) { - azt_state_old = azt_state; - printk("AZT_S_MODE\n"); - } -#endif - if (!skip) { - if ((st = aztStatus()) != -1) { - if ((st & AST_DSK_CHG) - || (st & AST_NOT_READY)) { - aztDiskChanged = 1; - aztTocUpToDate = 0; - azt_invalidate_buffers(); - end_request(CURRENT, 0); - printk - ("aztcd: Disk Changed or Not Ready 1 - Unmount Disk!\n"); - } - } else - break; - } - skip = 0; - - if ((st & AST_DOOR_OPEN) || (st & AST_NOT_READY)) { - aztDiskChanged = 1; - aztTocUpToDate = 0; - printk - ("aztcd: Disk Changed or Not Ready 2 - Unmount Disk!\n"); - end_request(CURRENT, 0); - printk((st & AST_DOOR_OPEN) ? - "aztcd: door open\n" : - "aztcd: disk removed\n"); - if (azt_transfer_is_active) { - azt_state = AZT_S_START; - loop_ctl = 1; /* goto immediately */ - break; - } - azt_state = AZT_S_IDLE; - while (current_valid()) - end_request(CURRENT, 0); - return; - } - -/* if (aztSendCmd(ACMD_SET_MODE)) RETURN("azt_poll 3"); - outb(0x01, DATA_PORT); - PA_OK; - STEN_LOW; -*/ - if (aztSendCmd(ACMD_GET_STATUS)) - RETURN("azt_poll 4"); - STEN_LOW; - azt_mode = 1; - azt_state = AZT_S_READ; - AztTimeout = 3000; - - break; - - - case AZT_S_READ: -#ifdef AZT_TEST3 - if (azt_state != azt_state_old) { - azt_state_old = azt_state; - printk("AZT_S_READ\n"); - } -#endif - if (!skip) { - if ((st = aztStatus()) != -1) { - if ((st & AST_DSK_CHG) - || (st & AST_NOT_READY)) { - aztDiskChanged = 1; - aztTocUpToDate = 0; - azt_invalidate_buffers(); - printk - ("aztcd: Disk Changed or Not Ready 3 - Unmount Disk!\n"); - end_request(CURRENT, 0); - } - } else - break; - } - - skip = 0; - if ((st & AST_DOOR_OPEN) || (st & AST_NOT_READY)) { - aztDiskChanged = 1; - aztTocUpToDate = 0; - printk((st & AST_DOOR_OPEN) ? - "aztcd: door open\n" : - "aztcd: disk removed\n"); - if (azt_transfer_is_active) { - azt_state = AZT_S_START; - loop_ctl = 1; - break; - } - azt_state = AZT_S_IDLE; - while (current_valid()) - end_request(CURRENT, 0); - return; - } - - if (current_valid()) { - struct azt_Play_msf msf; - int i; - azt_next_bn = CURRENT->sector / 4; - azt_hsg2msf(azt_next_bn, &msf.start); - i = 0; - /* find out in which track we are */ - while (azt_msf2hsg(&msf.start) > - azt_msf2hsg(&Toc[++i].trackTime)) { - }; - if (azt_msf2hsg(&msf.start) < - azt_msf2hsg(&Toc[i].trackTime) - - AZT_BUF_SIZ) { - azt_read_count = AZT_BUF_SIZ; /*fast, because we read ahead */ - /*azt_read_count=CURRENT->nr_sectors; slow, no read ahead */ - } else /* don't read beyond end of track */ -#if AZT_MULTISESSION - { - azt_read_count = - (azt_msf2hsg(&Toc[i].trackTime) - / 4) * 4 - - azt_msf2hsg(&msf.start); - if (azt_read_count < 0) - azt_read_count = 0; - if (azt_read_count > AZT_BUF_SIZ) - azt_read_count = - AZT_BUF_SIZ; - printk - ("aztcd: warning - trying to read beyond end of track\n"); -/* printk("%i %i %li %li\n",i,azt_read_count,azt_msf2hsg(&msf.start),azt_msf2hsg(&Toc[i].trackTime)); -*/ } -#else - { - azt_read_count = AZT_BUF_SIZ; - } -#endif - msf.end.min = 0; - msf.end.sec = 0; - msf.end.frame = azt_read_count; /*Mitsumi here reads 0xffffff sectors */ -#ifdef AZT_TEST3 - printk - ("---reading msf-address %x:%x:%x %x:%x:%x\n", - msf.start.min, msf.start.sec, - msf.start.frame, msf.end.min, - msf.end.sec, msf.end.frame); - printk - ("azt_next_bn:%x azt_buf_in:%x azt_buf_out:%x azt_buf_bn:%x\n", - azt_next_bn, azt_buf_in, azt_buf_out, - azt_buf_bn[azt_buf_in]); -#endif - if (azt_read_mode == AZT_MODE_2) { - sendAztCmd(ACMD_PLAY_READ_RAW, &msf); /*XA disks in raw mode */ - } else { - sendAztCmd(ACMD_PLAY_READ, &msf); /*others in cooked mode */ - } - azt_state = AZT_S_DATA; - AztTimeout = READ_TIMEOUT; - } else { - azt_state = AZT_S_STOP; - loop_ctl = 1; - break; - } - - break; - - - case AZT_S_DATA: -#ifdef AZT_TEST3 - if (azt_state != azt_state_old) { - azt_state_old = azt_state; - printk("AZT_S_DATA\n"); - } -#endif - - st = inb(STATUS_PORT) & AFL_STATUSorDATA; - - switch (st) { - - case AFL_DATA: -#ifdef AZT_TEST3 - if (st != azt_st_old) { - azt_st_old = st; - printk("---AFL_DATA st:%x\n", st); - } -#endif - if (!AztTries--) { - printk - ("aztcd: Read of Block %d Failed, Maybe Audio Disk ? Giving up\n", - azt_next_bn); - if (azt_transfer_is_active) { - AztTries = 0; - break; - } - if (current_valid()) - end_request(CURRENT, 0); - AztTries = 5; - } - azt_state = AZT_S_START; - AztTimeout = READ_TIMEOUT; - loop_ctl = 1; - break; - - case AFL_STATUSorDATA: -#ifdef AZT_TEST3 - if (st != azt_st_old) { - azt_st_old = st; - printk - ("---AFL_STATUSorDATA st:%x\n", - st); - } -#endif - break; - - default: -#ifdef AZT_TEST3 - if (st != azt_st_old) { - azt_st_old = st; - printk("---default: st:%x\n", st); - } -#endif - AztTries = 5; - if (!current_valid() && azt_buf_in == azt_buf_out) { - azt_state = AZT_S_STOP; - loop_ctl = 1; - break; - } - if (azt_read_count <= 0) - printk - ("aztcd: warning - try to read 0 frames\n"); - while (azt_read_count) { /*??? fast read ahead loop */ - azt_buf_bn[azt_buf_in] = -1; - DTEN_LOW; /*??? unsolved problem, very - seldom we get timeouts - here, don't now the real - reason. With my drive this - sometimes also happens with - Aztech's original driver under - DOS. Is it a hardware bug? - I tried to recover from such - situations here. Zimmermann */ - if (aztTimeOutCount >= AZT_TIMEOUT) { - printk - ("read_count:%d CURRENT->nr_sectors:%ld azt_buf_in:%d\n", - azt_read_count, - CURRENT->nr_sectors, - azt_buf_in); - printk - ("azt_transfer_is_active:%x\n", - azt_transfer_is_active); - azt_read_count = 0; - azt_state = AZT_S_STOP; - loop_ctl = 1; - end_request(CURRENT, 1); /*should we have here (1) or (0)? */ - } else { - if (azt_read_mode == - AZT_MODE_2) { - insb(DATA_PORT, - azt_buf + - CD_FRAMESIZE_RAW - * azt_buf_in, - CD_FRAMESIZE_RAW); - } else { - insb(DATA_PORT, - azt_buf + - CD_FRAMESIZE * - azt_buf_in, - CD_FRAMESIZE); - } - azt_read_count--; -#ifdef AZT_TEST3 - printk - ("AZT_S_DATA; ---I've read data- read_count: %d\n", - azt_read_count); - printk - ("azt_next_bn:%d azt_buf_in:%d azt_buf_out:%d azt_buf_bn:%d\n", - azt_next_bn, - azt_buf_in, - azt_buf_out, - azt_buf_bn - [azt_buf_in]); -#endif - azt_buf_bn[azt_buf_in] = - azt_next_bn++; - if (azt_buf_out == -1) - azt_buf_out = - azt_buf_in; - azt_buf_in = - azt_buf_in + 1 == - AZT_BUF_SIZ ? 0 : - azt_buf_in + 1; - } - } - if (!azt_transfer_is_active) { - while (current_valid()) { - azt_transfer(); - if (CURRENT->nr_sectors == - 0) - end_request(CURRENT, 1); - else - break; - } - } - - if (current_valid() - && (CURRENT->sector / 4 < azt_next_bn - || CURRENT->sector / 4 > - azt_next_bn + AZT_BUF_SIZ)) { - azt_state = AZT_S_STOP; - loop_ctl = 1; - break; - } - AztTimeout = READ_TIMEOUT; - if (azt_read_count == 0) { - azt_state = AZT_S_STOP; - loop_ctl = 1; - break; - } - break; - } - break; - - - case AZT_S_STOP: -#ifdef AZT_TEST3 - if (azt_state != azt_state_old) { - azt_state_old = azt_state; - printk("AZT_S_STOP\n"); - } -#endif - if (azt_read_count != 0) - printk("aztcd: discard data=%x frames\n", - azt_read_count); - while (azt_read_count != 0) { - int i; - if (!(inb(STATUS_PORT) & AFL_DATA)) { - if (azt_read_mode == AZT_MODE_2) - for (i = 0; - i < CD_FRAMESIZE_RAW; - i++) - inb(DATA_PORT); - else - for (i = 0; - i < CD_FRAMESIZE; i++) - inb(DATA_PORT); - } - azt_read_count--; - } - if (aztSendCmd(ACMD_GET_STATUS)) - RETURN("azt_poll 5"); - azt_state = AZT_S_STOPPING; - AztTimeout = 1000; - break; - - case AZT_S_STOPPING: -#ifdef AZT_TEST3 - if (azt_state != azt_state_old) { - azt_state_old = azt_state; - printk("AZT_S_STOPPING\n"); - } -#endif - - if ((st = aztStatus()) == -1 && AztTimeout) - break; - - if ((st != -1) - && ((st & AST_DSK_CHG) - || (st & AST_NOT_READY))) { - aztDiskChanged = 1; - aztTocUpToDate = 0; - azt_invalidate_buffers(); - printk - ("aztcd: Disk Changed or Not Ready 4 - Unmount Disk!\n"); - end_request(CURRENT, 0); - } - -#ifdef AZT_TEST3 - printk("CURRENT_VALID %d azt_mode %d\n", - current_valid(), azt_mode); -#endif - - if (current_valid()) { - if (st != -1) { - if (azt_mode == 1) { - azt_state = AZT_S_READ; - loop_ctl = 1; - skip = 1; - break; - } else { - azt_state = AZT_S_MODE; - loop_ctl = 1; - skip = 1; - break; - } - } else { - azt_state = AZT_S_START; - AztTimeout = 1; - } - } else { - azt_state = AZT_S_IDLE; - return; - } - break; - - default: - printk("aztcd: invalid state %d\n", azt_state); - return; - } /* case */ - } /* while */ - - - if (!AztTimeout--) { - printk("aztcd: timeout in state %d\n", azt_state); - azt_state = AZT_S_STOP; - if (aztSendCmd(ACMD_STOP)) - RETURN("azt_poll 6"); - STEN_LOW_WAIT; - }; - - SET_TIMER(azt_poll, HZ / 100); -} - - -/*########################################################################### - * Miscellaneous support functions - ########################################################################### -*/ -static void azt_hsg2msf(long hsg, struct msf *msf) -{ - hsg += 150; - msf->min = hsg / 4500; - hsg %= 4500; - msf->sec = hsg / 75; - msf->frame = hsg % 75; -#ifdef AZT_DEBUG - if (msf->min >= 70) - printk("aztcd: Error hsg2msf address Minutes\n"); - if (msf->sec >= 60) - printk("aztcd: Error hsg2msf address Seconds\n"); - if (msf->frame >= 75) - printk("aztcd: Error hsg2msf address Frames\n"); -#endif - azt_bin2bcd(&msf->min); /* convert to BCD */ - azt_bin2bcd(&msf->sec); - azt_bin2bcd(&msf->frame); -} - -static long azt_msf2hsg(struct msf *mp) -{ - return azt_bcd2bin(mp->frame) + azt_bcd2bin(mp->sec) * 75 - + azt_bcd2bin(mp->min) * 4500 - CD_MSF_OFFSET; -} - -static void azt_bin2bcd(unsigned char *p) -{ - int u, t; - - u = *p % 10; - t = *p / 10; - *p = u | (t << 4); -} - -static int azt_bcd2bin(unsigned char bcd) -{ - return (bcd >> 4) * 10 + (bcd & 0xF); -} - -MODULE_LICENSE("GPL"); -MODULE_ALIAS_BLOCKDEV_MAJOR(AZTECH_CDROM_MAJOR); diff --git a/drivers/cdrom/aztcd.h b/drivers/cdrom/aztcd.h deleted file mode 100644 index 057501e3162..00000000000 --- a/drivers/cdrom/aztcd.h +++ /dev/null @@ -1,162 +0,0 @@ -/* $Id: aztcd.h,v 2.60 1997/11/29 09:51:22 root Exp root $ - * - * Definitions for a AztechCD268 CD-ROM interface - * Copyright (C) 1994-98 Werner Zimmermann - * - * based on Mitsumi CDROM driver by Martin Harriss - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * History: W.Zimmermann adaption to Aztech CD268-01A Version 1.3 - * October 1994 Email: Werner.Zimmermann@fht-esslingen.de - */ - -/* *** change this to set the I/O port address of your CD-ROM drive, - set to '-1', if you want autoprobing */ -#define AZT_BASE_ADDR -1 - -/* list of autoprobing addresses (not more than 15), last value must be 0x000 - Note: Autoprobing is only enabled, if AZT_BASE_ADDR is set to '-1' ! */ -#define AZT_BASE_AUTO { 0x320, 0x300, 0x310, 0x330, 0x000 } - -/* Uncomment this, if your CDROM is connected to a Soundwave32-soundcard - and configure AZT_BASE_ADDR and AZT_SW32_BASE_ADDR */ -/*#define AZT_SW32 1 -*/ - -#ifdef AZT_SW32 -#define AZT_SW32_BASE_ADDR 0x220 /*I/O port base address of your soundcard*/ -#endif - -/* Set this to 1, if you want your tray to be locked, set to 0 to prevent tray - from locking */ -#define AZT_ALLOW_TRAY_LOCK 1 - -/*Set this to 1 to allow auto-eject when unmounting a disk, set to 0, if you - don't want the auto-eject feature*/ -#define AZT_AUTO_EJECT 0 - -/*Set this to 1, if you want to use incompatible ioctls for reading in raw and - cooked mode */ -#define AZT_PRIVATE_IOCTLS 1 - -/*Set this to 1, if you want multisession support by the ISO fs. Even if you set - this value to '0' you can use multisession CDs. In that case the drive's firm- - ware will do the appropriate redirection automatically. The CD will then look - like a single session CD (but nevertheless all data may be read). Please read - chapter '5.1 Multisession support' in README.aztcd for details. Normally it's - uncritical to leave this setting untouched */ -#define AZT_MULTISESSION 1 - -/*Uncomment this, if you are using a linux kernel version prior to 2.1.0 */ -/*#define AZT_KERNEL_PRIOR_2_1 */ - -/*---------------------------------------------------------------------------*/ -/*-----nothing to be configured for normal applications below this line------*/ - - -/* Increase this if you get lots of timeouts; if you get kernel panic, replace - STEN_LOW_WAIT by STEN_LOW in the source code */ -#define AZT_STATUS_DELAY 400 /*for timer wait, STEN_LOW_WAIT*/ -#define AZT_TIMEOUT 8000000 /*for busy wait STEN_LOW, DTEN_LOW*/ -#define AZT_FAST_TIMEOUT 10000 /*for reading the version string*/ - -/* number of times to retry a command before giving up */ -#define AZT_RETRY_ATTEMPTS 3 - -/* port access macros */ -#define CMD_PORT azt_port -#define DATA_PORT azt_port -#define STATUS_PORT azt_port+1 -#define MODE_PORT azt_port+2 -#ifdef AZT_SW32 - #define AZT_SW32_INIT (unsigned int) (0xFF00 & (AZT_BASE_ADDR*16)) - #define AZT_SW32_CONFIG_REG AZT_SW32_BASE_ADDR+0x16 /*Soundwave32 Config. Register*/ - #define AZT_SW32_ID_REG AZT_SW32_BASE_ADDR+0x04 /*Soundwave32 ID Version Register*/ -#endif - -/* status bits */ -#define AST_CMD_CHECK 0x80 /* 1 = command error */ -#define AST_DOOR_OPEN 0x40 /* 1 = door is open */ -#define AST_NOT_READY 0x20 /* 1 = no disk in the drive */ -#define AST_DSK_CHG 0x02 /* 1 = disk removed or changed */ -#define AST_MODE 0x01 /* 0=MODE1, 1=MODE2 */ -#define AST_MODE_BITS 0x1C /* Mode Bits */ -#define AST_INITIAL 0x0C /* initial, only valid ... */ -#define AST_BUSY 0x04 /* now playing, only valid - in combination with mode - bits */ -/* flag bits */ -#define AFL_DATA 0x02 /* data available if low */ -#define AFL_STATUS 0x04 /* status available if low */ -#define AFL_OP_OK 0x01 /* OP_OK command correct*/ -#define AFL_PA_OK 0x02 /* PA_OK parameter correct*/ -#define AFL_OP_ERR 0x05 /* error in command*/ -#define AFL_PA_ERR 0x06 /* error in parameters*/ -#define POLLED 0x04 /* polled mode */ - -/* commands */ -#define ACMD_SOFT_RESET 0x10 /* reset drive */ -#define ACMD_PLAY_READ 0x20 /* read data track in cooked mode */ -#define ACMD_PLAY_READ_RAW 0x21 /* reading in raw mode*/ -#define ACMD_SEEK 0x30 /* seek msf address*/ -#define ACMD_SEEK_TO_LEADIN 0x31 /* seek to leadin track*/ -#define ACMD_GET_ERROR 0x40 /* get error code */ -#define ACMD_GET_STATUS 0x41 /* get status */ -#define ACMD_GET_Q_CHANNEL 0x50 /* read info from q channel */ -#define ACMD_EJECT 0x60 /* eject/open tray */ -#define ACMD_CLOSE 0x61 /* close tray */ -#define ACMD_LOCK 0x71 /* lock tray closed */ -#define ACMD_UNLOCK 0x72 /* unlock tray */ -#define ACMD_PAUSE 0x80 /* pause */ -#define ACMD_STOP 0x81 /* stop play */ -#define ACMD_PLAY_AUDIO 0x90 /* play audio track */ -#define ACMD_SET_VOLUME 0x93 /* set audio level */ -#define ACMD_GET_VERSION 0xA0 /* get firmware version */ -#define ACMD_SET_DISK_TYPE 0xA1 /* set disk data mode */ - -#define MAX_TRACKS 104 - -struct msf { - unsigned char min; - unsigned char sec; - unsigned char frame; -}; - -struct azt_Play_msf { - struct msf start; - struct msf end; -}; - -struct azt_DiskInfo { - unsigned char first; - unsigned char next; - unsigned char last; - struct msf diskLength; - struct msf firstTrack; - unsigned char multi; - struct msf nextSession; - struct msf lastSession; - unsigned char xa; - unsigned char audio; -}; - -struct azt_Toc { - unsigned char ctrl_addr; - unsigned char track; - unsigned char pointIndex; - struct msf trackTime; - struct msf diskTime; -}; diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index 3625a05bc3d..aa5468f487b 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -302,7 +302,7 @@ module_param(lockdoor, bool, 0); module_param(check_media_type, bool, 0); module_param(mrw_format_restart, bool, 0); -static DEFINE_SPINLOCK(cdrom_lock); +static DEFINE_MUTEX(cdrom_mutex); static const char *mrw_format_status[] = { "not mrw", @@ -438,10 +438,10 @@ int register_cdrom(struct cdrom_device_info *cdi) cdo->generic_packet = cdrom_dummy_generic_packet; cdinfo(CD_REG_UNREG, "drive \"/dev/%s\" registered\n", cdi->name); - spin_lock(&cdrom_lock); + mutex_lock(&cdrom_mutex); cdi->next = topCdromPtr; topCdromPtr = cdi; - spin_unlock(&cdrom_lock); + mutex_unlock(&cdrom_mutex); return 0; } #undef ENSURE @@ -452,7 +452,7 @@ int unregister_cdrom(struct cdrom_device_info *unreg) cdinfo(CD_OPEN, "entering unregister_cdrom\n"); prev = NULL; - spin_lock(&cdrom_lock); + mutex_lock(&cdrom_mutex); cdi = topCdromPtr; while (cdi && cdi != unreg) { prev = cdi; @@ -460,7 +460,7 @@ int unregister_cdrom(struct cdrom_device_info *unreg) } if (cdi == NULL) { - spin_unlock(&cdrom_lock); + mutex_unlock(&cdrom_mutex); return -2; } if (prev) @@ -468,7 +468,7 @@ int unregister_cdrom(struct cdrom_device_info *unreg) else topCdromPtr = cdi->next; - spin_unlock(&cdrom_lock); + mutex_unlock(&cdrom_mutex); if (cdi->exit) cdi->exit(cdi); @@ -3289,103 +3289,137 @@ static struct cdrom_sysctl_settings { int check; /* check media type */ } cdrom_sysctl_settings; +enum cdrom_print_option { + CTL_NAME, + CTL_SPEED, + CTL_SLOTS, + CTL_CAPABILITY +}; + +static int cdrom_print_info(const char *header, int val, char *info, + int *pos, enum cdrom_print_option option) +{ + const int max_size = sizeof(cdrom_sysctl_settings.info); + struct cdrom_device_info *cdi; + int ret; + + ret = scnprintf(info + *pos, max_size - *pos, header); + if (!ret) + return 1; + + *pos += ret; + + for (cdi = topCdromPtr; cdi; cdi = cdi->next) { + switch (option) { + case CTL_NAME: + ret = scnprintf(info + *pos, max_size - *pos, + "\t%s", cdi->name); + break; + case CTL_SPEED: + ret = scnprintf(info + *pos, max_size - *pos, + "\t%d", cdi->speed); + break; + case CTL_SLOTS: + ret = scnprintf(info + *pos, max_size - *pos, + "\t%d", cdi->capacity); + break; + case CTL_CAPABILITY: + ret = scnprintf(info + *pos, max_size - *pos, + "\t%d", CDROM_CAN(val) != 0); + break; + default: + printk(KERN_INFO "cdrom: invalid option%d\n", option); + return 1; + } + if (!ret) + return 1; + *pos += ret; + } + + return 0; +} + static int cdrom_sysctl_info(ctl_table *ctl, int write, struct file * filp, void __user *buffer, size_t *lenp, loff_t *ppos) { - int pos; - struct cdrom_device_info *cdi; + int pos; char *info = cdrom_sysctl_settings.info; + const int max_size = sizeof(cdrom_sysctl_settings.info); if (!*lenp || (*ppos && !write)) { *lenp = 0; return 0; } + mutex_lock(&cdrom_mutex); + pos = sprintf(info, "CD-ROM information, " VERSION "\n"); - pos += sprintf(info+pos, "\ndrive name:\t"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%s", cdi->name); - - pos += sprintf(info+pos, "\ndrive speed:\t"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", cdi->speed); - - pos += sprintf(info+pos, "\ndrive # of slots:"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", cdi->capacity); - - pos += sprintf(info+pos, "\nCan close tray:\t"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_CLOSE_TRAY) != 0); - - pos += sprintf(info+pos, "\nCan open tray:\t"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_OPEN_TRAY) != 0); - - pos += sprintf(info+pos, "\nCan lock tray:\t"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_LOCK) != 0); - - pos += sprintf(info+pos, "\nCan change speed:"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_SELECT_SPEED) != 0); - - pos += sprintf(info+pos, "\nCan select disk:"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_SELECT_DISC) != 0); - - pos += sprintf(info+pos, "\nCan read multisession:"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_MULTI_SESSION) != 0); - - pos += sprintf(info+pos, "\nCan read MCN:\t"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_MCN) != 0); - - pos += sprintf(info+pos, "\nReports media changed:"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_MEDIA_CHANGED) != 0); - - pos += sprintf(info+pos, "\nCan play audio:\t"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_PLAY_AUDIO) != 0); - - pos += sprintf(info+pos, "\nCan write CD-R:\t"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_CD_R) != 0); - - pos += sprintf(info+pos, "\nCan write CD-RW:"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_CD_RW) != 0); - - pos += sprintf(info+pos, "\nCan read DVD:\t"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_DVD) != 0); - - pos += sprintf(info+pos, "\nCan write DVD-R:"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_DVD_R) != 0); - - pos += sprintf(info+pos, "\nCan write DVD-RAM:"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_DVD_RAM) != 0); - - pos += sprintf(info+pos, "\nCan read MRW:\t"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_MRW) != 0); - - pos += sprintf(info+pos, "\nCan write MRW:\t"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_MRW_W) != 0); - - pos += sprintf(info+pos, "\nCan write RAM:\t"); - for (cdi=topCdromPtr;cdi!=NULL;cdi=cdi->next) - pos += sprintf(info+pos, "\t%d", CDROM_CAN(CDC_RAM) != 0); - - strcpy(info+pos,"\n\n"); - - return proc_dostring(ctl, write, filp, buffer, lenp, ppos); + if (cdrom_print_info("\ndrive name:\t", 0, info, &pos, CTL_NAME)) + goto done; + if (cdrom_print_info("\ndrive speed:\t", 0, info, &pos, CTL_SPEED)) + goto done; + if (cdrom_print_info("\ndrive # of slots:", 0, info, &pos, CTL_SLOTS)) + goto done; + if (cdrom_print_info("\nCan close tray:\t", + CDC_CLOSE_TRAY, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nCan open tray:\t", + CDC_OPEN_TRAY, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nCan lock tray:\t", + CDC_LOCK, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nCan change speed:", + CDC_SELECT_SPEED, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nCan select disk:", + CDC_SELECT_DISC, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nCan read multisession:", + CDC_MULTI_SESSION, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nCan read MCN:\t", + CDC_MCN, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nReports media changed:", + CDC_MEDIA_CHANGED, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nCan play audio:\t", + CDC_PLAY_AUDIO, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nCan write CD-R:\t", + CDC_CD_R, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nCan write CD-RW:", + CDC_CD_RW, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nCan read DVD:\t", + CDC_DVD, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nCan write DVD-R:", + CDC_DVD_R, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nCan write DVD-RAM:", + CDC_DVD_RAM, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nCan read MRW:\t", + CDC_MRW, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nCan write MRW:\t", + CDC_MRW_W, info, &pos, CTL_CAPABILITY)) + goto done; + if (cdrom_print_info("\nCan write RAM:\t", + CDC_RAM, info, &pos, CTL_CAPABILITY)) + goto done; + if (!scnprintf(info + pos, max_size - pos, "\n\n")) + goto done; +doit: + mutex_unlock(&cdrom_mutex); + return proc_dostring(ctl, write, filp, buffer, lenp, ppos); +done: + printk(KERN_INFO "cdrom: info buffer too small\n"); + goto doit; } /* Unfortunately, per device settings are not implemented through diff --git a/drivers/cdrom/cdu31a.c b/drivers/cdrom/cdu31a.c deleted file mode 100644 index 2157c58755e..00000000000 --- a/drivers/cdrom/cdu31a.c +++ /dev/null @@ -1,3251 +0,0 @@ -/* -* Sony CDU-31A CDROM interface device driver. -* -* Corey Minyard (minyard@wf-rch.cirr.com) -* -* Colossians 3:17 -* -* See Documentation/cdrom/cdu31a for additional details about this driver. -* -* The Sony interface device driver handles Sony interface CDROM -* drives and provides a complete block-level interface as well as an -* ioctl() interface compatible with the Sun (as specified in -* include/linux/cdrom.h). With this interface, CDROMs can be -* accessed and standard audio CDs can be played back normally. -* -* WARNING - All autoprobes have been removed from the driver. -* You MUST configure the CDU31A via a LILO config -* at boot time or in lilo.conf. I have the -* following in my lilo.conf: -* -* append="cdu31a=0x1f88,0,PAS" -* -* The first number is the I/O base address of the -* card. The second is the interrupt (0 means none). - * The third should be "PAS" if on a Pro-Audio - * spectrum, or nothing if on something else. - * - * This interface is (unfortunately) a polled interface. This is - * because most Sony interfaces are set up with DMA and interrupts - * disables. Some (like mine) do not even have the capability to - * handle interrupts or DMA. For this reason you will see a lot of - * the following: - * - * retry_count = jiffies+ SONY_JIFFIES_TIMEOUT; - * while (time_before(jiffies, retry_count) && (! <some condition to wait for)) - * { - * while (handle_sony_cd_attention()) - * ; - * - * sony_sleep(); - * } - * if (the condition not met) - * { - * return an error; - * } - * - * This ugly hack waits for something to happen, sleeping a little - * between every try. it also handles attentions, which are - * asynchronous events from the drive informing the driver that a disk - * has been inserted, removed, etc. - * - * NEWS FLASH - The driver now supports interrupts but they are - * turned off by default. Use of interrupts is highly encouraged, it - * cuts CPU usage down to a reasonable level. I had DMA in for a while - * but PC DMA is just too slow. Better to just insb() it. - * - * One thing about these drives: They talk in MSF (Minute Second Frame) format. - * There are 75 frames a second, 60 seconds a minute, and up to 75 minutes on a - * disk. The funny thing is that these are sent to the drive in BCD, but the - * interface wants to see them in decimal. A lot of conversion goes on. - * - * DRIVER SPECIAL FEATURES - * ----------------------- - * - * This section describes features beyond the normal audio and CD-ROM - * functions of the drive. - * - * XA compatibility - * - * The driver should support XA disks for both the CDU31A and CDU33A. - * It does this transparently, the using program doesn't need to set it. - * - * Multi-Session - * - * A multi-session disk looks just like a normal disk to the user. - * Just mount one normally, and all the data should be there. - * A special thanks to Koen for help with this! - * - * Raw sector I/O - * - * Using the CDROMREADAUDIO it is possible to read raw audio and data - * tracks. Both operations return 2352 bytes per sector. On the data - * tracks, the first 12 bytes is not returned by the drive and the value - * of that data is indeterminate. - * - * - * Copyright (C) 1993 Corey Minyard - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * TODO: - * CDs with form1 and form2 sectors cause problems - * with current read-ahead strategy. - * - * Credits: - * Heiko Eissfeldt <heiko@colossus.escape.de> - * For finding abug in the return of the track numbers. - * TOC processing redone for proper multisession support. - * - * - * It probably a little late to be adding a history, but I guess I - * will start. - * - * 10/24/95 - Added support for disabling the eject button when the - * drive is open. Note that there is a small problem - * still here, if the eject button is pushed while the - * drive light is flashing, the drive will return a bad - * status and be reset. It recovers, though. - * - * 03/07/97 - Fixed a problem with timers. - * - * - * 18 Spetember 1997 -- Ported to Uniform CD-ROM driver by - * Heiko Eissfeldt <heiko@colossus.escape.de> with additional - * changes by Erik Andersen <andersee@debian.org> - * - * 24 January 1998 -- Removed the scd_disc_status() function, which was now - * just dead code left over from the port. - * Erik Andersen <andersee@debian.org> - * - * 16 July 1998 -- Drive donated to Erik Andersen by John Kodis - * <kodis@jagunet.com>. Work begun on fixing driver to - * work under 2.1.X. Added temporary extra printks - * which seem to slow it down enough to work. - * - * 9 November 1999 -- Make kernel-parameter implementation work with 2.3.x - * Removed init_module & cleanup_module in favor of - * module_init & module_exit. - * Torben Mathiasen <tmm@image.dk> - * - * 22 October 2004 -- Make the driver work in 2.6.X - * Added workaround to fix hard lockups on eject - * Fixed door locking problem after mounting empty drive - * Set double-speed drives to double speed by default - * Removed all readahead things - not needed anymore - * Ondrej Zary <rainbow@rainbow-software.org> -*/ - -#define DEBUG 1 - -#include <linux/major.h> -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/hdreg.h> -#include <linux/genhd.h> -#include <linux/ioport.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/cdrom.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/dma.h> - -#include "cdu31a.h" - -#define MAJOR_NR CDU31A_CDROM_MAJOR -#include <linux/blkdev.h> - -#define CDU31A_MAX_CONSECUTIVE_ATTENTIONS 10 - -#define PFX "CDU31A: " - -/* -** Edit the following data to change interrupts, DMA channels, etc. -** Default is polled and no DMA. DMA is not recommended for double-speed -** drives. -*/ -static struct { - unsigned short base; /* I/O Base Address */ - short int_num; /* Interrupt Number (-1 means scan for it, - 0 means don't use) */ -} cdu31a_addresses[] __initdata = { - {0} -}; - -static int handle_sony_cd_attention(void); -static int read_subcode(void); -static void sony_get_toc(void); -static int scd_spinup(void); -/*static int scd_open(struct inode *inode, struct file *filp);*/ -static int scd_open(struct cdrom_device_info *, int); -static void do_sony_cd_cmd(unsigned char cmd, - unsigned char *params, - unsigned int num_params, - unsigned char *result_buffer, - unsigned int *result_size); -static void size_to_buf(unsigned int size, unsigned char *buf); - -/* Parameters for the read-ahead. */ -static unsigned int sony_next_block; /* Next 512 byte block offset */ -static unsigned int sony_blocks_left = 0; /* Number of 512 byte blocks left - in the current read command. */ - - -/* The base I/O address of the Sony Interface. This is a variable (not a - #define) so it can be easily changed via some future ioctl() */ -static unsigned int cdu31a_port = 0; -module_param(cdu31a_port, uint, 0); - -/* - * The following are I/O addresses of the various registers for the drive. The - * comment for the base address also applies here. - */ -static volatile unsigned short sony_cd_cmd_reg; -static volatile unsigned short sony_cd_param_reg; -static volatile unsigned short sony_cd_write_reg; -static volatile unsigned short sony_cd_control_reg; -static volatile unsigned short sony_cd_status_reg; -static volatile unsigned short sony_cd_result_reg; -static volatile unsigned short sony_cd_read_reg; -static volatile unsigned short sony_cd_fifost_reg; - -static struct request_queue *cdu31a_queue; -static DEFINE_SPINLOCK(cdu31a_lock); /* queue lock */ - -static int sony_spun_up = 0; /* Has the drive been spun up? */ - -static int sony_speed = 0; /* Last wanted speed */ - -static int sony_xa_mode = 0; /* Is an XA disk in the drive - and the drive a CDU31A? */ - -static int sony_raw_data_mode = 1; /* 1 if data tracks, 0 if audio. - For raw data reads. */ - -static unsigned int sony_usage = 0; /* How many processes have the - drive open. */ - -static int sony_pas_init = 0; /* Initialize the Pro-Audio - Spectrum card? */ - -static struct s_sony_session_toc single_toc; /* Holds the - table of - contents. */ - -static struct s_all_sessions_toc sony_toc; /* entries gathered from all - sessions */ - -static int sony_toc_read = 0; /* Has the TOC been read for - the drive? */ - -static struct s_sony_subcode last_sony_subcode; /* Points to the last - subcode address read */ - -static DECLARE_MUTEX(sony_sem); /* Semaphore for drive hardware access */ - -static int is_double_speed = 0; /* does the drive support double speed ? */ - -static int is_auto_eject = 1; /* Door has been locked? 1=No/0=Yes */ - -/* - * The audio status uses the values from read subchannel data as specified - * in include/linux/cdrom.h. - */ -static volatile int sony_audio_status = CDROM_AUDIO_NO_STATUS; - -/* - * The following are a hack for pausing and resuming audio play. The drive - * does not work as I would expect it, if you stop it then start it again, - * the drive seeks back to the beginning and starts over. This holds the - * position during a pause so a resume can restart it. It uses the - * audio status variable above to tell if it is paused. - */ -static unsigned volatile char cur_pos_msf[3] = { 0, 0, 0 }; -static unsigned volatile char final_pos_msf[3] = { 0, 0, 0 }; - -/* What IRQ is the drive using? 0 if none. */ -static int cdu31a_irq = 0; -module_param(cdu31a_irq, int, 0); - -/* The interrupt handler will wake this queue up when it gets an - interrupts. */ -static DECLARE_WAIT_QUEUE_HEAD(cdu31a_irq_wait); -static int irq_flag = 0; - -static int curr_control_reg = 0; /* Current value of the control register */ - -/* A disk changed variable. When a disk change is detected, it will - all be set to TRUE. As the upper layers ask for disk_changed status - it will be cleared. */ -static char disk_changed; - -/* This was readahead_buffer once... Now it's used only for audio reads */ -static char audio_buffer[CD_FRAMESIZE_RAW]; - -/* Used to time a short period to abort an operation after the - drive has been idle for a while. This keeps the light on - the drive from flashing for very long. */ -static struct timer_list cdu31a_abort_timer; - -/* Marks if the timeout has started an abort read. This is used - on entry to the drive to tell the code to read out the status - from the abort read. */ -static int abort_read_started = 0; - -/* - * Uniform cdrom interface function - * report back, if disc has changed from time of last request. - */ -static int scd_media_changed(struct cdrom_device_info *cdi, int disc_nr) -{ - int retval; - - retval = disk_changed; - disk_changed = 0; - - return retval; -} - -/* - * Uniform cdrom interface function - * report back, if drive is ready - */ -static int scd_drive_status(struct cdrom_device_info *cdi, int slot_nr) -{ - if (CDSL_CURRENT != slot_nr) - /* we have no changer support */ - return -EINVAL; - if (sony_spun_up) - return CDS_DISC_OK; - if (down_interruptible(&sony_sem)) - return -ERESTARTSYS; - if (scd_spinup() == 0) - sony_spun_up = 1; - up(&sony_sem); - return sony_spun_up ? CDS_DISC_OK : CDS_DRIVE_NOT_READY; -} - -static inline void enable_interrupts(void) -{ - curr_control_reg |= (SONY_ATTN_INT_EN_BIT - | SONY_RES_RDY_INT_EN_BIT - | SONY_DATA_RDY_INT_EN_BIT); - outb(curr_control_reg, sony_cd_control_reg); -} - -static inline void disable_interrupts(void) -{ - curr_control_reg &= ~(SONY_ATTN_INT_EN_BIT - | SONY_RES_RDY_INT_EN_BIT - | SONY_DATA_RDY_INT_EN_BIT); - outb(curr_control_reg, sony_cd_control_reg); -} - -/* - * Wait a little while (used for polling the drive). If in initialization, - * setting a timeout doesn't work, so just loop for a while. - */ -static inline void sony_sleep(void) -{ - if (cdu31a_irq <= 0) { - yield(); - } else { /* Interrupt driven */ - DEFINE_WAIT(w); - int first = 1; - - while (1) { - prepare_to_wait(&cdu31a_irq_wait, &w, - TASK_INTERRUPTIBLE); - if (first) { - enable_interrupts(); - first = 0; - } - - if (irq_flag != 0) - break; - if (!signal_pending(current)) { - schedule(); - continue; - } else - disable_interrupts(); - break; - } - finish_wait(&cdu31a_irq_wait, &w); - irq_flag = 0; - } -} - - -/* - * The following are convenience routine to read various status and set - * various conditions in the drive. - */ -static inline int is_attention(void) -{ - return (inb(sony_cd_status_reg) & SONY_ATTN_BIT) != 0; -} - -static inline int is_busy(void) -{ - return (inb(sony_cd_status_reg) & SONY_BUSY_BIT) != 0; -} - -static inline int is_data_ready(void) -{ - return (inb(sony_cd_status_reg) & SONY_DATA_RDY_BIT) != 0; -} - -static inline int is_data_requested(void) -{ - return (inb(sony_cd_status_reg) & SONY_DATA_REQUEST_BIT) != 0; -} - -static inline int is_result_ready(void) -{ - return (inb(sony_cd_status_reg) & SONY_RES_RDY_BIT) != 0; -} - -static inline int is_param_write_rdy(void) -{ - return (inb(sony_cd_fifost_reg) & SONY_PARAM_WRITE_RDY_BIT) != 0; -} - -static inline int is_result_reg_not_empty(void) -{ - return (inb(sony_cd_fifost_reg) & SONY_RES_REG_NOT_EMP_BIT) != 0; -} - -static inline void reset_drive(void) -{ - curr_control_reg = 0; - sony_toc_read = 0; - outb(SONY_DRIVE_RESET_BIT, sony_cd_control_reg); -} - -/* - * Uniform cdrom interface function - * reset drive and return when it is ready - */ -static int scd_reset(struct cdrom_device_info *cdi) -{ - unsigned long retry_count; - - if (down_interruptible(&sony_sem)) - return -ERESTARTSYS; - reset_drive(); - - retry_count = jiffies + SONY_RESET_TIMEOUT; - while (time_before(jiffies, retry_count) && (!is_attention())) { - sony_sleep(); - } - - up(&sony_sem); - return 0; -} - -static inline void clear_attention(void) -{ - outb(curr_control_reg | SONY_ATTN_CLR_BIT, sony_cd_control_reg); -} - -static inline void clear_result_ready(void) -{ - outb(curr_control_reg | SONY_RES_RDY_CLR_BIT, sony_cd_control_reg); -} - -static inline void clear_data_ready(void) -{ - outb(curr_control_reg | SONY_DATA_RDY_CLR_BIT, - sony_cd_control_reg); -} - -static inline void clear_param_reg(void) -{ - outb(curr_control_reg | SONY_PARAM_CLR_BIT, sony_cd_control_reg); -} - -static inline unsigned char read_status_register(void) -{ - return inb(sony_cd_status_reg); -} - -static inline unsigned char read_result_register(void) -{ - return inb(sony_cd_result_reg); -} - -static inline unsigned char read_data_register(void) -{ - return inb(sony_cd_read_reg); -} - -static inline void write_param(unsigned char param) -{ - outb(param, sony_cd_param_reg); -} - -static inline void write_cmd(unsigned char cmd) -{ - outb(curr_control_reg | SONY_RES_RDY_INT_EN_BIT, - sony_cd_control_reg); - outb(cmd, sony_cd_cmd_reg); -} - -static irqreturn_t cdu31a_interrupt(int irq, void *dev_id) -{ - unsigned char val; - - if (abort_read_started) { - /* We might be waiting for an abort to finish. Don't - disable interrupts yet, though, because we handle - this one here. */ - /* Clear out the result registers. */ - while (is_result_reg_not_empty()) { - val = read_result_register(); - } - clear_data_ready(); - clear_result_ready(); - - /* Clear out the data */ - while (is_data_requested()) { - val = read_data_register(); - } - abort_read_started = 0; - - /* If something was waiting, wake it up now. */ - if (waitqueue_active(&cdu31a_irq_wait)) { - disable_interrupts(); - irq_flag = 1; - wake_up_interruptible(&cdu31a_irq_wait); - } - } else if (waitqueue_active(&cdu31a_irq_wait)) { - disable_interrupts(); - irq_flag = 1; - wake_up_interruptible(&cdu31a_irq_wait); - } else { - disable_interrupts(); - printk(KERN_NOTICE PFX - "Got an interrupt but nothing was waiting\n"); - } - return IRQ_HANDLED; -} - -/* - * give more verbose error messages - */ -static unsigned char *translate_error(unsigned char err_code) -{ - static unsigned char errbuf[80]; - - switch (err_code) { - case 0x10: return "illegal command "; - case 0x11: return "illegal parameter "; - - case 0x20: return "not loaded "; - case 0x21: return "no disc "; - case 0x22: return "not spinning "; - case 0x23: return "spinning "; - case 0x25: return "spindle servo "; - case 0x26: return "focus servo "; - case 0x29: return "eject mechanism "; - case 0x2a: return "audio playing "; - case 0x2c: return "emergency eject "; - - case 0x30: return "focus "; - case 0x31: return "frame sync "; - case 0x32: return "subcode address "; - case 0x33: return "block sync "; - case 0x34: return "header address "; - - case 0x40: return "illegal track read "; - case 0x41: return "mode 0 read "; - case 0x42: return "illegal mode read "; - case 0x43: return "illegal block size read "; - case 0x44: return "mode read "; - case 0x45: return "form read "; - case 0x46: return "leadout read "; - case 0x47: return "buffer overrun "; - - case 0x53: return "unrecoverable CIRC "; - case 0x57: return "unrecoverable LECC "; - - case 0x60: return "no TOC "; - case 0x61: return "invalid subcode data "; - case 0x63: return "focus on TOC read "; - case 0x64: return "frame sync on TOC read "; - case 0x65: return "TOC data "; - - case 0x70: return "hardware failure "; - case 0x91: return "leadin "; - case 0x92: return "leadout "; - case 0x93: return "data track "; - } - sprintf(errbuf, "unknown 0x%02x ", err_code); - return errbuf; -} - -/* - * Set the drive parameters so the drive will auto-spin-up when a - * disk is inserted. - */ -static void set_drive_params(int want_doublespeed) -{ - unsigned char res_reg[12]; - unsigned int res_size; - unsigned char params[3]; - - - params[0] = SONY_SD_AUTO_SPIN_DOWN_TIME; - params[1] = 0x00; /* Never spin down the drive. */ - do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD, - params, 2, res_reg, &res_size); - if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) { - printk(KERN_NOTICE PFX - "Unable to set spin-down time: 0x%2.2x\n", res_reg[1]); - } - - params[0] = SONY_SD_MECH_CONTROL; - params[1] = SONY_AUTO_SPIN_UP_BIT; /* Set auto spin up */ - - if (is_auto_eject) - params[1] |= SONY_AUTO_EJECT_BIT; - - if (is_double_speed && want_doublespeed) { - params[1] |= SONY_DOUBLE_SPEED_BIT; /* Set the drive to double speed if - possible */ - } - do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD, - params, 2, res_reg, &res_size); - if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) { - printk(KERN_NOTICE PFX "Unable to set mechanical " - "parameters: 0x%2.2x\n", res_reg[1]); - } -} - -/* - * Uniform cdrom interface function - * select reading speed for data access - */ -static int scd_select_speed(struct cdrom_device_info *cdi, int speed) -{ - if (speed == 0) - sony_speed = 1; - else - sony_speed = speed - 1; - - if (down_interruptible(&sony_sem)) - return -ERESTARTSYS; - set_drive_params(sony_speed); - up(&sony_sem); - return 0; -} - -/* - * Uniform cdrom interface function - * lock or unlock eject button - */ -static int scd_lock_door(struct cdrom_device_info *cdi, int lock) -{ - if (lock == 0) { - is_auto_eject = 1; - } else { - is_auto_eject = 0; - } - if (down_interruptible(&sony_sem)) - return -ERESTARTSYS; - set_drive_params(sony_speed); - up(&sony_sem); - return 0; -} - -/* - * This code will reset the drive and attempt to restore sane parameters. - */ -static void restart_on_error(void) -{ - unsigned char res_reg[12]; - unsigned int res_size; - unsigned long retry_count; - - - printk(KERN_NOTICE PFX "Resetting drive on error\n"); - reset_drive(); - retry_count = jiffies + SONY_RESET_TIMEOUT; - while (time_before(jiffies, retry_count) && (!is_attention())) { - sony_sleep(); - } - set_drive_params(sony_speed); - do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg, &res_size); - if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) { - printk(KERN_NOTICE PFX "Unable to spin up drive: 0x%2.2x\n", - res_reg[1]); - } - - msleep(2000); - - sony_get_toc(); -} - -/* - * This routine writes data to the parameter register. Since this should - * happen fairly fast, it is polled with no OS waits between. - */ -static int write_params(unsigned char *params, int num_params) -{ - unsigned int retry_count; - - - retry_count = SONY_READY_RETRIES; - while ((retry_count > 0) && (!is_param_write_rdy())) { - retry_count--; - } - if (!is_param_write_rdy()) { - return -EIO; - } - - while (num_params > 0) { - write_param(*params); - params++; - num_params--; - } - - return 0; -} - - -/* - * The following reads data from the command result register. It is a - * fairly complex routine, all status info flows back through this - * interface. The algorithm is stolen directly from the flowcharts in - * the drive manual. - */ -static void -get_result(unsigned char *result_buffer, unsigned int *result_size) -{ - unsigned char a, b; - int i; - unsigned long retry_count; - - - while (handle_sony_cd_attention()); - /* Wait for the result data to be ready */ - retry_count = jiffies + SONY_JIFFIES_TIMEOUT; - while (time_before(jiffies, retry_count) - && (is_busy() || (!(is_result_ready())))) { - sony_sleep(); - - while (handle_sony_cd_attention()); - } - if (is_busy() || (!(is_result_ready()))) { - pr_debug(PFX "timeout out %d\n", __LINE__); - result_buffer[0] = 0x20; - result_buffer[1] = SONY_TIMEOUT_OP_ERR; - *result_size = 2; - return; - } - - /* - * Get the first two bytes. This determines what else needs - * to be done. - */ - clear_result_ready(); - a = read_result_register(); - *result_buffer = a; - result_buffer++; - - /* Check for block error status result. */ - if ((a & 0xf0) == 0x50) { - *result_size = 1; - return; - } - - b = read_result_register(); - *result_buffer = b; - result_buffer++; - *result_size = 2; - - /* - * 0x20 means an error occurred. Byte 2 will have the error code. - * Otherwise, the command succeeded, byte 2 will have the count of - * how many more status bytes are coming. - * - * The result register can be read 10 bytes at a time, a wait for - * result ready to be asserted must be done between every 10 bytes. - */ - if ((a & 0xf0) != 0x20) { - if (b > 8) { - for (i = 0; i < 8; i++) { - *result_buffer = read_result_register(); - result_buffer++; - (*result_size)++; - } - b = b - 8; - - while (b > 10) { - retry_count = SONY_READY_RETRIES; - while ((retry_count > 0) - && (!is_result_ready())) { - retry_count--; - } - if (!is_result_ready()) { - pr_debug(PFX "timeout out %d\n", - __LINE__); - result_buffer[0] = 0x20; - result_buffer[1] = - SONY_TIMEOUT_OP_ERR; - *result_size = 2; - return; - } - - clear_result_ready(); - - for (i = 0; i < 10; i++) { - *result_buffer = - read_result_register(); - result_buffer++; - (*result_size)++; - } - b = b - 10; - } - - if (b > 0) { - retry_count = SONY_READY_RETRIES; - while ((retry_count > 0) - && (!is_result_ready())) { - retry_count--; - } - if (!is_result_ready()) { - pr_debug(PFX "timeout out %d\n", - __LINE__); - result_buffer[0] = 0x20; - result_buffer[1] = - SONY_TIMEOUT_OP_ERR; - *result_size = 2; - return; - } - } - } - - while (b > 0) { - *result_buffer = read_result_register(); - result_buffer++; - (*result_size)++; - b--; - } - } -} - -/* - * Do a command that does not involve data transfer. This routine must - * be re-entrant from the same task to support being called from the - * data operation code when an error occurs. - */ -static void -do_sony_cd_cmd(unsigned char cmd, - unsigned char *params, - unsigned int num_params, - unsigned char *result_buffer, unsigned int *result_size) -{ - unsigned long retry_count; - int num_retries = 0; - -retry_cd_operation: - - while (handle_sony_cd_attention()); - - retry_count = jiffies + SONY_JIFFIES_TIMEOUT; - while (time_before(jiffies, retry_count) && (is_busy())) { - sony_sleep(); - - while (handle_sony_cd_attention()); - } - if (is_busy()) { - pr_debug(PFX "timeout out %d\n", __LINE__); - result_buffer[0] = 0x20; - result_buffer[1] = SONY_TIMEOUT_OP_ERR; - *result_size = 2; - } else { - clear_result_ready(); - clear_param_reg(); - - write_params(params, num_params); - write_cmd(cmd); - - get_result(result_buffer, result_size); - } - - if (((result_buffer[0] & 0xf0) == 0x20) - && (num_retries < MAX_CDU31A_RETRIES)) { - num_retries++; - msleep(100); - goto retry_cd_operation; - } -} - - -/* - * Handle an attention from the drive. This will return 1 if it found one - * or 0 if not (if one is found, the caller might want to call again). - * - * This routine counts the number of consecutive times it is called - * (since this is always called from a while loop until it returns - * a 0), and returns a 0 if it happens too many times. This will help - * prevent a lockup. - */ -static int handle_sony_cd_attention(void) -{ - unsigned char atten_code; - static int num_consecutive_attentions = 0; - volatile int val; - - -#if 0 - pr_debug(PFX "Entering %s\n", __FUNCTION__); -#endif - if (is_attention()) { - if (num_consecutive_attentions > - CDU31A_MAX_CONSECUTIVE_ATTENTIONS) { - printk(KERN_NOTICE PFX "Too many consecutive " - "attentions: %d\n", num_consecutive_attentions); - num_consecutive_attentions = 0; - pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, - __LINE__); - return 0; - } - - clear_attention(); - atten_code = read_result_register(); - - switch (atten_code) { - /* Someone changed the CD. Mark it as changed */ - case SONY_MECH_LOADED_ATTN: - disk_changed = 1; - sony_toc_read = 0; - sony_audio_status = CDROM_AUDIO_NO_STATUS; - sony_blocks_left = 0; - break; - - case SONY_SPIN_DOWN_COMPLETE_ATTN: - /* Mark the disk as spun down. */ - sony_spun_up = 0; - break; - - case SONY_AUDIO_PLAY_DONE_ATTN: - sony_audio_status = CDROM_AUDIO_COMPLETED; - read_subcode(); - break; - - case SONY_EJECT_PUSHED_ATTN: - if (is_auto_eject) { - sony_audio_status = CDROM_AUDIO_INVALID; - } - break; - - case SONY_LEAD_IN_ERR_ATTN: - case SONY_LEAD_OUT_ERR_ATTN: - case SONY_DATA_TRACK_ERR_ATTN: - case SONY_AUDIO_PLAYBACK_ERR_ATTN: - sony_audio_status = CDROM_AUDIO_ERROR; - break; - } - - num_consecutive_attentions++; - pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); - return 1; - } else if (abort_read_started) { - while (is_result_reg_not_empty()) { - val = read_result_register(); - } - clear_data_ready(); - clear_result_ready(); - /* Clear out the data */ - while (is_data_requested()) { - val = read_data_register(); - } - abort_read_started = 0; - pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); - return 1; - } - - num_consecutive_attentions = 0; -#if 0 - pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); -#endif - return 0; -} - - -/* Convert from an integer 0-99 to BCD */ -static inline unsigned int int_to_bcd(unsigned int val) -{ - int retval; - - - retval = (val / 10) << 4; - retval = retval | val % 10; - return retval; -} - - -/* Convert from BCD to an integer from 0-99 */ -static unsigned int bcd_to_int(unsigned int bcd) -{ - return (((bcd >> 4) & 0x0f) * 10) + (bcd & 0x0f); -} - - -/* - * Convert a logical sector value (like the OS would want to use for - * a block device) to an MSF format. - */ -static void log_to_msf(unsigned int log, unsigned char *msf) -{ - log = log + LOG_START_OFFSET; - msf[0] = int_to_bcd(log / 4500); - log = log % 4500; - msf[1] = int_to_bcd(log / 75); - msf[2] = int_to_bcd(log % 75); -} - - -/* - * Convert an MSF format to a logical sector. - */ -static unsigned int msf_to_log(unsigned char *msf) -{ - unsigned int log; - - - log = msf[2]; - log += msf[1] * 75; - log += msf[0] * 4500; - log = log - LOG_START_OFFSET; - - return log; -} - - -/* - * Take in integer size value and put it into a buffer like - * the drive would want to see a number-of-sector value. - */ -static void size_to_buf(unsigned int size, unsigned char *buf) -{ - buf[0] = size / 65536; - size = size % 65536; - buf[1] = size / 256; - buf[2] = size % 256; -} - -/* Starts a read operation. Returns 0 on success and 1 on failure. - The read operation used here allows multiple sequential sectors - to be read and status returned for each sector. The driver will - read the output one at a time as the requests come and abort the - operation if the requested sector is not the next one from the - drive. */ -static int -start_request(unsigned int sector, unsigned int nsect) -{ - unsigned char params[6]; - unsigned long retry_count; - - - pr_debug(PFX "Entering %s\n", __FUNCTION__); - log_to_msf(sector, params); - size_to_buf(nsect, ¶ms[3]); - - /* - * Clear any outstanding attentions and wait for the drive to - * complete any pending operations. - */ - while (handle_sony_cd_attention()); - - retry_count = jiffies + SONY_JIFFIES_TIMEOUT; - while (time_before(jiffies, retry_count) && (is_busy())) { - sony_sleep(); - - while (handle_sony_cd_attention()); - } - - if (is_busy()) { - printk(KERN_NOTICE PFX "Timeout while waiting " - "to issue command\n"); - pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); - return 1; - } else { - /* Issue the command */ - clear_result_ready(); - clear_param_reg(); - - write_params(params, 6); - write_cmd(SONY_READ_BLKERR_STAT_CMD); - - sony_blocks_left = nsect * 4; - sony_next_block = sector * 4; - pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); - return 0; - } - pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); -} - -/* Abort a pending read operation. Clear all the drive status variables. */ -static void abort_read(void) -{ - unsigned char result_reg[2]; - int result_size; - volatile int val; - - - do_sony_cd_cmd(SONY_ABORT_CMD, NULL, 0, result_reg, &result_size); - if ((result_reg[0] & 0xf0) == 0x20) { - printk(KERN_ERR PFX "Aborting read, %s error\n", - translate_error(result_reg[1])); - } - - while (is_result_reg_not_empty()) { - val = read_result_register(); - } - clear_data_ready(); - clear_result_ready(); - /* Clear out the data */ - while (is_data_requested()) { - val = read_data_register(); - } - - sony_blocks_left = 0; -} - -/* Called when the timer times out. This will abort the - pending read operation. */ -static void handle_abort_timeout(unsigned long data) -{ - pr_debug(PFX "Entering %s\n", __FUNCTION__); - /* If it is in use, ignore it. */ - if (down_trylock(&sony_sem) == 0) { - /* We can't use abort_read(), because it will sleep - or schedule in the timer interrupt. Just start - the operation, finish it on the next access to - the drive. */ - clear_result_ready(); - clear_param_reg(); - write_cmd(SONY_ABORT_CMD); - - sony_blocks_left = 0; - abort_read_started = 1; - up(&sony_sem); - } - pr_debug(PFX "Leaving %s\n", __FUNCTION__); -} - -/* Actually get one sector of data from the drive. */ -static void -input_data_sector(char *buffer) -{ - pr_debug(PFX "Entering %s\n", __FUNCTION__); - - /* If an XA disk on a CDU31A, skip the first 12 bytes of data from - the disk. The real data is after that. We can use audio_buffer. */ - if (sony_xa_mode) - insb(sony_cd_read_reg, audio_buffer, CD_XA_HEAD); - - clear_data_ready(); - - insb(sony_cd_read_reg, buffer, 2048); - - /* If an XA disk, we have to clear out the rest of the unused - error correction data. We can use audio_buffer for that. */ - if (sony_xa_mode) - insb(sony_cd_read_reg, audio_buffer, CD_XA_TAIL); - - pr_debug(PFX "Leaving %s\n", __FUNCTION__); -} - -/* read data from the drive. Note the nsect must be <= 4. */ -static void -read_data_block(char *buffer, - unsigned int block, - unsigned int nblocks, - unsigned char res_reg[], int *res_size) -{ - unsigned long retry_count; - - pr_debug(PFX "Entering %s\n", __FUNCTION__); - - res_reg[0] = 0; - res_reg[1] = 0; - *res_size = 0; - - /* Wait for the drive to tell us we have something */ - retry_count = jiffies + SONY_JIFFIES_TIMEOUT; - while (time_before(jiffies, retry_count) && !(is_data_ready())) { - while (handle_sony_cd_attention()); - - sony_sleep(); - } - if (!(is_data_ready())) { - if (is_result_ready()) { - get_result(res_reg, res_size); - if ((res_reg[0] & 0xf0) != 0x20) { - printk(KERN_NOTICE PFX "Got result that should" - " have been error: %d\n", res_reg[0]); - res_reg[0] = 0x20; - res_reg[1] = SONY_BAD_DATA_ERR; - *res_size = 2; - } - abort_read(); - } else { - pr_debug(PFX "timeout out %d\n", __LINE__); - res_reg[0] = 0x20; - res_reg[1] = SONY_TIMEOUT_OP_ERR; - *res_size = 2; - abort_read(); - } - } else { - input_data_sector(buffer); - sony_blocks_left -= nblocks; - sony_next_block += nblocks; - - /* Wait for the status from the drive. */ - retry_count = jiffies + SONY_JIFFIES_TIMEOUT; - while (time_before(jiffies, retry_count) - && !(is_result_ready())) { - while (handle_sony_cd_attention()); - - sony_sleep(); - } - - if (!is_result_ready()) { - pr_debug(PFX "timeout out %d\n", __LINE__); - res_reg[0] = 0x20; - res_reg[1] = SONY_TIMEOUT_OP_ERR; - *res_size = 2; - abort_read(); - } else { - get_result(res_reg, res_size); - - /* If we got a buffer status, handle that. */ - if ((res_reg[0] & 0xf0) == 0x50) { - - if ((res_reg[0] == - SONY_NO_CIRC_ERR_BLK_STAT) - || (res_reg[0] == - SONY_NO_LECC_ERR_BLK_STAT) - || (res_reg[0] == - SONY_RECOV_LECC_ERR_BLK_STAT)) { - /* nothing here */ - } else { - printk(KERN_ERR PFX "Data block " - "error: 0x%x\n", res_reg[0]); - res_reg[0] = 0x20; - res_reg[1] = SONY_BAD_DATA_ERR; - *res_size = 2; - } - - /* Final transfer is done for read command, get final result. */ - if (sony_blocks_left == 0) { - get_result(res_reg, res_size); - } - } else if ((res_reg[0] & 0xf0) != 0x20) { - /* The drive gave me bad status, I don't know what to do. - Reset the driver and return an error. */ - printk(KERN_ERR PFX "Invalid block " - "status: 0x%x\n", res_reg[0]); - restart_on_error(); - res_reg[0] = 0x20; - res_reg[1] = SONY_BAD_DATA_ERR; - *res_size = 2; - } - } - } - pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); -} - - -/* - * The OS calls this to perform a read or write operation to the drive. - * Write obviously fail. Reads to a read ahead of sony_buffer_size - * bytes to help speed operations. This especially helps since the OS - * uses 1024 byte blocks and the drive uses 2048 byte blocks. Since most - * data access on a CD is done sequentially, this saves a lot of operations. - */ -static void do_cdu31a_request(request_queue_t * q) -{ - struct request *req; - int block, nblock, num_retries; - unsigned char res_reg[12]; - unsigned int res_size; - - pr_debug(PFX "Entering %s\n", __FUNCTION__); - - spin_unlock_irq(q->queue_lock); - if (down_interruptible(&sony_sem)) { - spin_lock_irq(q->queue_lock); - return; - } - - /* Get drive status before doing anything. */ - while (handle_sony_cd_attention()); - - /* Make sure we have a valid TOC. */ - sony_get_toc(); - - - /* Make sure the timer is cancelled. */ - del_timer(&cdu31a_abort_timer); - - while (1) { - /* - * The beginning here is stolen from the hard disk driver. I hope - * it's right. - */ - req = elv_next_request(q); - if (!req) - goto end_do_cdu31a_request; - - if (!sony_spun_up) - scd_spinup(); - - block = req->sector; - nblock = req->nr_sectors; - pr_debug(PFX "request at block %d, length %d blocks\n", - block, nblock); - if (!sony_toc_read) { - printk(KERN_NOTICE PFX "TOC not read\n"); - end_request(req, 0); - continue; - } - - /* WTF??? */ - if (!blk_fs_request(req)) { - end_request(req, 0); - continue; - } - if (rq_data_dir(req) == WRITE) { - end_request(req, 0); - continue; - } - - /* - * If the block address is invalid or the request goes beyond the end of - * the media, return an error. - */ - if (((block + nblock) / 4) >= sony_toc.lead_out_start_lba) { - printk(KERN_NOTICE PFX "Request past end of media\n"); - end_request(req, 0); - continue; - } - - if (nblock > 4) - nblock = 4; - num_retries = 0; - - try_read_again: - while (handle_sony_cd_attention()); - - if (!sony_toc_read) { - printk(KERN_NOTICE PFX "TOC not read\n"); - end_request(req, 0); - continue; - } - - /* If no data is left to be read from the drive, start the - next request. */ - if (sony_blocks_left == 0) { - if (start_request(block / 4, nblock / 4)) { - end_request(req, 0); - continue; - } - } - /* If the requested block is not the next one waiting in - the driver, abort the current operation and start a - new one. */ - else if (block != sony_next_block) { - pr_debug(PFX "Read for block %d, expected %d\n", - block, sony_next_block); - abort_read(); - if (!sony_toc_read) { - printk(KERN_NOTICE PFX "TOC not read\n"); - end_request(req, 0); - continue; - } - if (start_request(block / 4, nblock / 4)) { - printk(KERN_NOTICE PFX "start request failed\n"); - end_request(req, 0); - continue; - } - } - - read_data_block(req->buffer, block, nblock, res_reg, &res_size); - - if (res_reg[0] != 0x20) { - if (!end_that_request_first(req, 1, nblock)) { - spin_lock_irq(q->queue_lock); - blkdev_dequeue_request(req); - end_that_request_last(req, 1); - spin_unlock_irq(q->queue_lock); - } - continue; - } - - if (num_retries > MAX_CDU31A_RETRIES) { - end_request(req, 0); - continue; - } - - num_retries++; - if (res_reg[1] == SONY_NOT_SPIN_ERR) { - do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg, - &res_size); - } else { - printk(KERN_NOTICE PFX "%s error for block %d, nblock %d\n", - translate_error(res_reg[1]), block, nblock); - } - goto try_read_again; - } - end_do_cdu31a_request: -#if 0 - /* After finished, cancel any pending operations. */ - abort_read(); -#else - /* Start a timer to time out after a while to disable - the read. */ - cdu31a_abort_timer.expires = jiffies + 2 * HZ; /* Wait 2 seconds */ - add_timer(&cdu31a_abort_timer); -#endif - - up(&sony_sem); - spin_lock_irq(q->queue_lock); - pr_debug(PFX "Leaving %s at %d\n", __FUNCTION__, __LINE__); -} - - -/* - * Read the table of contents from the drive and set up TOC if - * successful. - */ -static void sony_get_toc(void) -{ - unsigned char res_reg[2]; - unsigned int res_size; - unsigned char parms[1]; - int session; - int num_spin_ups; - int totaltracks = 0; - int mint = 99; - int maxt = 0; - - pr_debug(PFX "Entering %s\n", __FUNCTION__); - - num_spin_ups = 0; - if (!sony_toc_read) { - respinup_on_gettoc: - /* Ignore the result, since it might error if spinning already. */ - do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg, - &res_size); - - do_sony_cd_cmd(SONY_READ_TOC_CMD, NULL, 0, res_reg, - &res_size); - - /* The drive sometimes returns error 0. I don't know why, but ignore - it. It seems to mean the drive has already done the operation. */ - if ((res_size < 2) - || ((res_reg[0] != 0) && (res_reg[1] != 0))) { - /* If the drive is already playing, it's ok. */ - if ((res_reg[1] == SONY_AUDIO_PLAYING_ERR) - || (res_reg[1] == 0)) { - goto gettoc_drive_spinning; - } - - /* If the drive says it is not spun up (even though we just did it!) - then retry the operation at least a few times. */ - if ((res_reg[1] == SONY_NOT_SPIN_ERR) - && (num_spin_ups < MAX_CDU31A_RETRIES)) { - num_spin_ups++; - goto respinup_on_gettoc; - } - - printk("cdu31a: Error reading TOC: %x %s\n", - res_reg[0], translate_error(res_reg[1])); - return; - } - - gettoc_drive_spinning: - - /* The idea here is we keep asking for sessions until the command - fails. Then we know what the last valid session on the disk is. - No need to check session 0, since session 0 is the same as session - 1; the command returns different information if you give it 0. - */ -#if DEBUG - memset(&sony_toc, 0x0e, sizeof(sony_toc)); - memset(&single_toc, 0x0f, sizeof(single_toc)); -#endif - session = 1; - while (1) { -/* This seems to slow things down enough to make it work. This - * appears to be a problem in do_sony_cd_cmd. This printk seems - * to address the symptoms... -Erik */ - pr_debug(PFX "Trying session %d\n", session); - parms[0] = session; - do_sony_cd_cmd(SONY_READ_TOC_SPEC_CMD, - parms, 1, res_reg, &res_size); - - pr_debug(PFX "%2.2x %2.2x\n", res_reg[0], res_reg[1]); - - if ((res_size < 2) - || ((res_reg[0] & 0xf0) == 0x20)) { - /* An error reading the TOC, this must be past the last session. */ - if (session == 1) - printk - ("Yikes! Couldn't read any sessions!"); - break; - } - pr_debug(PFX "Reading session %d\n", session); - - parms[0] = session; - do_sony_cd_cmd(SONY_REQ_TOC_DATA_SPEC_CMD, - parms, - 1, - (unsigned char *) &single_toc, - &res_size); - if ((res_size < 2) - || ((single_toc.exec_status[0] & 0xf0) == - 0x20)) { - printk(KERN_ERR PFX "Error reading " - "session %d: %x %s\n", - session, single_toc.exec_status[0], - translate_error(single_toc. - exec_status[1])); - /* An error reading the TOC. Return without sony_toc_read - set. */ - return; - } - pr_debug(PFX "add0 %01x, con0 %01x, poi0 %02x, " - "1st trk %d, dsktyp %x, dum0 %x\n", - single_toc.address0, single_toc.control0, - single_toc.point0, - bcd_to_int(single_toc.first_track_num), - single_toc.disk_type, single_toc.dummy0); - pr_debug(PFX "add1 %01x, con1 %01x, poi1 %02x, " - "lst trk %d, dummy1 %x, dum2 %x\n", - single_toc.address1, single_toc.control1, - single_toc.point1, - bcd_to_int(single_toc.last_track_num), - single_toc.dummy1, single_toc.dummy2); - pr_debug(PFX "add2 %01x, con2 %01x, poi2 %02x " - "leadout start min %d, sec %d, frame %d\n", - single_toc.address2, single_toc.control2, - single_toc.point2, - bcd_to_int(single_toc.lead_out_start_msf[0]), - bcd_to_int(single_toc.lead_out_start_msf[1]), - bcd_to_int(single_toc.lead_out_start_msf[2])); - if (res_size > 18 && single_toc.pointb0 > 0xaf) - pr_debug(PFX "addb0 %01x, conb0 %01x, poib0 %02x, nextsession min %d, sec %d, frame %d\n" - "#mode5_ptrs %02d, max_start_outer_leadout_msf min %d, sec %d, frame %d\n", - single_toc.addressb0, - single_toc.controlb0, - single_toc.pointb0, - bcd_to_int(single_toc. - next_poss_prog_area_msf - [0]), - bcd_to_int(single_toc. - next_poss_prog_area_msf - [1]), - bcd_to_int(single_toc. - next_poss_prog_area_msf - [2]), - single_toc.num_mode_5_pointers, - bcd_to_int(single_toc. - max_start_outer_leadout_msf - [0]), - bcd_to_int(single_toc. - max_start_outer_leadout_msf - [1]), - bcd_to_int(single_toc. - max_start_outer_leadout_msf - [2])); - if (res_size > 27 && single_toc.pointb1 > 0xaf) - pr_debug(PFX "addb1 %01x, conb1 %01x, poib1 %02x, %x %x %x %x #skipint_ptrs %d, #skiptrkassign %d %x\n", - single_toc.addressb1, - single_toc.controlb1, - single_toc.pointb1, - single_toc.dummyb0_1[0], - single_toc.dummyb0_1[1], - single_toc.dummyb0_1[2], - single_toc.dummyb0_1[3], - single_toc.num_skip_interval_pointers, - single_toc.num_skip_track_assignments, - single_toc.dummyb0_2); - if (res_size > 36 && single_toc.pointb2 > 0xaf) - pr_debug(PFX "addb2 %01x, conb2 %01x, poib2 %02x, %02x %02x %02x %02x %02x %02x %02x\n", - single_toc.addressb2, - single_toc.controlb2, - single_toc.pointb2, - single_toc.tracksb2[0], - single_toc.tracksb2[1], - single_toc.tracksb2[2], - single_toc.tracksb2[3], - single_toc.tracksb2[4], - single_toc.tracksb2[5], - single_toc.tracksb2[6]); - if (res_size > 45 && single_toc.pointb3 > 0xaf) - pr_debug(PFX "addb3 %01x, conb3 %01x, poib3 %02x, %02x %02x %02x %02x %02x %02x %02x\n", - single_toc.addressb3, - single_toc.controlb3, - single_toc.pointb3, - single_toc.tracksb3[0], - single_toc.tracksb3[1], - single_toc.tracksb3[2], - single_toc.tracksb3[3], - single_toc.tracksb3[4], - single_toc.tracksb3[5], - single_toc.tracksb3[6]); - if (res_size > 54 && single_toc.pointb4 > 0xaf) - pr_debug(PFX "addb4 %01x, conb4 %01x, poib4 %02x, %02x %02x %02x %02x %02x %02x %02x\n", - single_toc.addressb4, - single_toc.controlb4, - single_toc.pointb4, - single_toc.tracksb4[0], - single_toc.tracksb4[1], - single_toc.tracksb4[2], - single_toc.tracksb4[3], - single_toc.tracksb4[4], - single_toc.tracksb4[5], - single_toc.tracksb4[6]); - if (res_size > 63 && single_toc.pointc0 > 0xaf) - pr_debug(PFX "addc0 %01x, conc0 %01x, poic0 %02x, %02x %02x %02x %02x %02x %02x %02x\n", - single_toc.addressc0, - single_toc.controlc0, - single_toc.pointc0, - single_toc.dummyc0[0], - single_toc.dummyc0[1], - single_toc.dummyc0[2], - single_toc.dummyc0[3], - single_toc.dummyc0[4], - single_toc.dummyc0[5], - single_toc.dummyc0[6]); -#undef DEBUG -#define DEBUG 0 - - sony_toc.lead_out_start_msf[0] = - bcd_to_int(single_toc.lead_out_start_msf[0]); - sony_toc.lead_out_start_msf[1] = - bcd_to_int(single_toc.lead_out_start_msf[1]); - sony_toc.lead_out_start_msf[2] = - bcd_to_int(single_toc.lead_out_start_msf[2]); - sony_toc.lead_out_start_lba = - single_toc.lead_out_start_lba = - msf_to_log(sony_toc.lead_out_start_msf); - - /* For points that do not exist, move the data over them - to the right location. */ - if (single_toc.pointb0 != 0xb0) { - memmove(((char *) &single_toc) + 27, - ((char *) &single_toc) + 18, - res_size - 18); - res_size += 9; - } else if (res_size > 18) { - sony_toc.lead_out_start_msf[0] = - bcd_to_int(single_toc. - max_start_outer_leadout_msf - [0]); - sony_toc.lead_out_start_msf[1] = - bcd_to_int(single_toc. - max_start_outer_leadout_msf - [1]); - sony_toc.lead_out_start_msf[2] = - bcd_to_int(single_toc. - max_start_outer_leadout_msf - [2]); - sony_toc.lead_out_start_lba = - msf_to_log(sony_toc. - lead_out_start_msf); - } - if (single_toc.pointb1 != 0xb1) { - memmove(((char *) &single_toc) + 36, - ((char *) &single_toc) + 27, - res_size - 27); - res_size += 9; - } - if (single_toc.pointb2 != 0xb2) { - memmove(((char *) &single_toc) + 45, - ((char *) &single_toc) + 36, - res_size - 36); - res_size += 9; - } - if (single_toc.pointb3 != 0xb3) { - memmove(((char *) &single_toc) + 54, - ((char *) &single_toc) + 45, - res_size - 45); - res_size += 9; - } - if (single_toc.pointb4 != 0xb4) { - memmove(((char *) &single_toc) + 63, - ((char *) &single_toc) + 54, - res_size - 54); - res_size += 9; - } - if (single_toc.pointc0 != 0xc0) { - memmove(((char *) &single_toc) + 72, - ((char *) &single_toc) + 63, - res_size - 63); - res_size += 9; - } -#if DEBUG - printk(PRINT_INFO PFX "start track lba %u, " - "leadout start lba %u\n", - single_toc.start_track_lba, - single_toc.lead_out_start_lba); - { - int i; - for (i = 0; - i < - 1 + - bcd_to_int(single_toc.last_track_num) - - - bcd_to_int(single_toc. - first_track_num); i++) { - printk(KERN_INFO PFX "trk %02d: add 0x%01x, con 0x%01x, track %02d, start min %02d, sec %02d, frame %02d\n", - i, - single_toc.tracks[i].address, - single_toc.tracks[i].control, - bcd_to_int(single_toc. - tracks[i].track), - bcd_to_int(single_toc. - tracks[i]. - track_start_msf - [0]), - bcd_to_int(single_toc. - tracks[i]. - track_start_msf - [1]), - bcd_to_int(single_toc. - tracks[i]. - track_start_msf - [2])); - if (mint > - bcd_to_int(single_toc. - tracks[i].track)) - mint = - bcd_to_int(single_toc. - tracks[i]. - track); - if (maxt < - bcd_to_int(single_toc. - tracks[i].track)) - maxt = - bcd_to_int(single_toc. - tracks[i]. - track); - } - printk(KERN_INFO PFX "min track number %d, " - "max track number %d\n", - mint, maxt); - } -#endif - - /* prepare a special table of contents for a CD-I disc. They don't have one. */ - if (single_toc.disk_type == 0x10 && - single_toc.first_track_num == 2 && - single_toc.last_track_num == 2 /* CD-I */ ) { - sony_toc.tracks[totaltracks].address = 1; - sony_toc.tracks[totaltracks].control = 4; /* force data tracks */ - sony_toc.tracks[totaltracks].track = 1; - sony_toc.tracks[totaltracks]. - track_start_msf[0] = 0; - sony_toc.tracks[totaltracks]. - track_start_msf[1] = 2; - sony_toc.tracks[totaltracks]. - track_start_msf[2] = 0; - mint = maxt = 1; - totaltracks++; - } else - /* gather track entries from this session */ - { - int i; - for (i = 0; - i < - 1 + - bcd_to_int(single_toc.last_track_num) - - - bcd_to_int(single_toc. - first_track_num); - i++, totaltracks++) { - sony_toc.tracks[totaltracks]. - address = - single_toc.tracks[i].address; - sony_toc.tracks[totaltracks]. - control = - single_toc.tracks[i].control; - sony_toc.tracks[totaltracks]. - track = - bcd_to_int(single_toc. - tracks[i].track); - sony_toc.tracks[totaltracks]. - track_start_msf[0] = - bcd_to_int(single_toc. - tracks[i]. - track_start_msf[0]); - sony_toc.tracks[totaltracks]. - track_start_msf[1] = - bcd_to_int(single_toc. - tracks[i]. - track_start_msf[1]); - sony_toc.tracks[totaltracks]. - track_start_msf[2] = - bcd_to_int(single_toc. - tracks[i]. - track_start_msf[2]); - if (i == 0) - single_toc. - start_track_lba = - msf_to_log(sony_toc. - tracks - [totaltracks]. - track_start_msf); - if (mint > - sony_toc.tracks[totaltracks]. - track) - mint = - sony_toc. - tracks[totaltracks]. - track; - if (maxt < - sony_toc.tracks[totaltracks]. - track) - maxt = - sony_toc. - tracks[totaltracks]. - track; - } - } - sony_toc.first_track_num = mint; - sony_toc.last_track_num = maxt; - /* Disk type of last session wins. For example: - CD-Extra has disk type 0 for the first session, so - a dumb HiFi CD player thinks it is a plain audio CD. - We are interested in the disk type of the last session, - which is 0x20 (XA) for CD-Extra, so we can access the - data track ... */ - sony_toc.disk_type = single_toc.disk_type; - sony_toc.sessions = session; - - /* don't believe everything :-) */ - if (session == 1) - single_toc.start_track_lba = 0; - sony_toc.start_track_lba = - single_toc.start_track_lba; - - if (session > 1 && single_toc.pointb0 == 0xb0 && - sony_toc.lead_out_start_lba == - single_toc.lead_out_start_lba) { - break; - } - - /* Let's not get carried away... */ - if (session > 40) { - printk(KERN_NOTICE PFX "too many sessions: " - "%d\n", session); - break; - } - session++; - } - sony_toc.track_entries = totaltracks; - /* add one entry for the LAST track with track number CDROM_LEADOUT */ - sony_toc.tracks[totaltracks].address = single_toc.address2; - sony_toc.tracks[totaltracks].control = single_toc.control2; - sony_toc.tracks[totaltracks].track = CDROM_LEADOUT; - sony_toc.tracks[totaltracks].track_start_msf[0] = - sony_toc.lead_out_start_msf[0]; - sony_toc.tracks[totaltracks].track_start_msf[1] = - sony_toc.lead_out_start_msf[1]; - sony_toc.tracks[totaltracks].track_start_msf[2] = - sony_toc.lead_out_start_msf[2]; - - sony_toc_read = 1; - - pr_debug(PFX "Disk session %d, start track: %d, " - "stop track: %d\n", - session, single_toc.start_track_lba, - single_toc.lead_out_start_lba); - } - pr_debug(PFX "Leaving %s\n", __FUNCTION__); -} - - -/* - * Uniform cdrom interface function - * return multisession offset and sector information - */ -static int scd_get_last_session(struct cdrom_device_info *cdi, - struct cdrom_multisession *ms_info) -{ - if (ms_info == NULL) - return 1; - - if (!sony_toc_read) { - if (down_interruptible(&sony_sem)) - return -ERESTARTSYS; - sony_get_toc(); - up(&sony_sem); - } - - ms_info->addr_format = CDROM_LBA; - ms_info->addr.lba = sony_toc.start_track_lba; - ms_info->xa_flag = sony_toc.disk_type == SONY_XA_DISK_TYPE || - sony_toc.disk_type == 0x10 /* CDI */ ; - - return 0; -} - -/* - * Search for a specific track in the table of contents. - */ -static int find_track(int track) -{ - int i; - - for (i = 0; i <= sony_toc.track_entries; i++) { - if (sony_toc.tracks[i].track == track) { - return i; - } - } - - return -1; -} - - -/* - * Read the subcode and put it in last_sony_subcode for future use. - */ -static int read_subcode(void) -{ - unsigned int res_size; - - - do_sony_cd_cmd(SONY_REQ_SUBCODE_ADDRESS_CMD, - NULL, - 0, (unsigned char *) &last_sony_subcode, &res_size); - if ((res_size < 2) - || ((last_sony_subcode.exec_status[0] & 0xf0) == 0x20)) { - printk(KERN_ERR PFX "Sony CDROM error %s (read_subcode)\n", - translate_error(last_sony_subcode.exec_status[1])); - return -EIO; - } - - last_sony_subcode.track_num = - bcd_to_int(last_sony_subcode.track_num); - last_sony_subcode.index_num = - bcd_to_int(last_sony_subcode.index_num); - last_sony_subcode.abs_msf[0] = - bcd_to_int(last_sony_subcode.abs_msf[0]); - last_sony_subcode.abs_msf[1] = - bcd_to_int(last_sony_subcode.abs_msf[1]); - last_sony_subcode.abs_msf[2] = - bcd_to_int(last_sony_subcode.abs_msf[2]); - - last_sony_subcode.rel_msf[0] = - bcd_to_int(last_sony_subcode.rel_msf[0]); - last_sony_subcode.rel_msf[1] = - bcd_to_int(last_sony_subcode.rel_msf[1]); - last_sony_subcode.rel_msf[2] = - bcd_to_int(last_sony_subcode.rel_msf[2]); - return 0; -} - -/* - * Uniform cdrom interface function - * return the media catalog number found on some older audio cds - */ -static int -scd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn) -{ - unsigned char resbuffer[2 + 14]; - unsigned char *mcnp = mcn->medium_catalog_number; - unsigned char *resp = resbuffer + 3; - unsigned int res_size; - - memset(mcn->medium_catalog_number, 0, 14); - if (down_interruptible(&sony_sem)) - return -ERESTARTSYS; - do_sony_cd_cmd(SONY_REQ_UPC_EAN_CMD, - NULL, 0, resbuffer, &res_size); - up(&sony_sem); - if ((res_size < 2) || ((resbuffer[0] & 0xf0) == 0x20)); - else { - /* packed bcd to single ASCII digits */ - *mcnp++ = (*resp >> 4) + '0'; - *mcnp++ = (*resp++ & 0x0f) + '0'; - *mcnp++ = (*resp >> 4) + '0'; - *mcnp++ = (*resp++ & 0x0f) + '0'; - *mcnp++ = (*resp >> 4) + '0'; - *mcnp++ = (*resp++ & 0x0f) + '0'; - *mcnp++ = (*resp >> 4) + '0'; - *mcnp++ = (*resp++ & 0x0f) + '0'; - *mcnp++ = (*resp >> 4) + '0'; - *mcnp++ = (*resp++ & 0x0f) + '0'; - *mcnp++ = (*resp >> 4) + '0'; - *mcnp++ = (*resp++ & 0x0f) + '0'; - *mcnp++ = (*resp >> 4) + '0'; - } - *mcnp = '\0'; - return 0; -} - - -/* - * Get the subchannel info like the CDROMSUBCHNL command wants to see it. If - * the drive is playing, the subchannel needs to be read (since it would be - * changing). If the drive is paused or completed, the subcode information has - * already been stored, just use that. The ioctl call wants things in decimal - * (not BCD), so all the conversions are done. - */ -static int sony_get_subchnl_info(struct cdrom_subchnl *schi) -{ - /* Get attention stuff */ - while (handle_sony_cd_attention()); - - sony_get_toc(); - if (!sony_toc_read) { - return -EIO; - } - - switch (sony_audio_status) { - case CDROM_AUDIO_NO_STATUS: - case CDROM_AUDIO_PLAY: - if (read_subcode() < 0) { - return -EIO; - } - break; - - case CDROM_AUDIO_PAUSED: - case CDROM_AUDIO_COMPLETED: - break; - -#if 0 - case CDROM_AUDIO_NO_STATUS: - schi->cdsc_audiostatus = sony_audio_status; - return 0; - break; -#endif - case CDROM_AUDIO_INVALID: - case CDROM_AUDIO_ERROR: - default: - return -EIO; - } - - schi->cdsc_audiostatus = sony_audio_status; - schi->cdsc_adr = last_sony_subcode.address; - schi->cdsc_ctrl = last_sony_subcode.control; - schi->cdsc_trk = last_sony_subcode.track_num; - schi->cdsc_ind = last_sony_subcode.index_num; - if (schi->cdsc_format == CDROM_MSF) { - schi->cdsc_absaddr.msf.minute = - last_sony_subcode.abs_msf[0]; - schi->cdsc_absaddr.msf.second = - last_sony_subcode.abs_msf[1]; - schi->cdsc_absaddr.msf.frame = - last_sony_subcode.abs_msf[2]; - - schi->cdsc_reladdr.msf.minute = - last_sony_subcode.rel_msf[0]; - schi->cdsc_reladdr.msf.second = - last_sony_subcode.rel_msf[1]; - schi->cdsc_reladdr.msf.frame = - last_sony_subcode.rel_msf[2]; - } else if (schi->cdsc_format == CDROM_LBA) { - schi->cdsc_absaddr.lba = - msf_to_log(last_sony_subcode.abs_msf); - schi->cdsc_reladdr.lba = - msf_to_log(last_sony_subcode.rel_msf); - } - - return 0; -} - -/* Get audio data from the drive. This is fairly complex because I - am looking for status and data at the same time, but if I get status - then I just look for data. I need to get the status immediately so - the switch from audio to data tracks will happen quickly. */ -static void -read_audio_data(char *buffer, unsigned char res_reg[], int *res_size) -{ - unsigned long retry_count; - int result_read; - - - res_reg[0] = 0; - res_reg[1] = 0; - *res_size = 0; - result_read = 0; - - /* Wait for the drive to tell us we have something */ - retry_count = jiffies + SONY_JIFFIES_TIMEOUT; - continue_read_audio_wait: - while (time_before(jiffies, retry_count) && !(is_data_ready()) - && !(is_result_ready() || result_read)) { - while (handle_sony_cd_attention()); - - sony_sleep(); - } - if (!(is_data_ready())) { - if (is_result_ready() && !result_read) { - get_result(res_reg, res_size); - - /* Read block status and continue waiting for data. */ - if ((res_reg[0] & 0xf0) == 0x50) { - result_read = 1; - goto continue_read_audio_wait; - } - /* Invalid data from the drive. Shut down the operation. */ - else if ((res_reg[0] & 0xf0) != 0x20) { - printk(KERN_WARNING PFX "Got result that " - "should have been error: %d\n", - res_reg[0]); - res_reg[0] = 0x20; - res_reg[1] = SONY_BAD_DATA_ERR; - *res_size = 2; - } - abort_read(); - } else { - pr_debug(PFX "timeout out %d\n", __LINE__); - res_reg[0] = 0x20; - res_reg[1] = SONY_TIMEOUT_OP_ERR; - *res_size = 2; - abort_read(); - } - } else { - clear_data_ready(); - - /* If data block, then get 2340 bytes offset by 12. */ - if (sony_raw_data_mode) { - insb(sony_cd_read_reg, buffer + CD_XA_HEAD, - CD_FRAMESIZE_RAW1); - } else { - /* Audio gets the whole 2352 bytes. */ - insb(sony_cd_read_reg, buffer, CD_FRAMESIZE_RAW); - } - - /* If I haven't already gotten the result, get it now. */ - if (!result_read) { - /* Wait for the drive to tell us we have something */ - retry_count = jiffies + SONY_JIFFIES_TIMEOUT; - while (time_before(jiffies, retry_count) - && !(is_result_ready())) { - while (handle_sony_cd_attention()); - - sony_sleep(); - } - - if (!is_result_ready()) { - pr_debug(PFX "timeout out %d\n", __LINE__); - res_reg[0] = 0x20; - res_reg[1] = SONY_TIMEOUT_OP_ERR; - *res_size = 2; - abort_read(); - return; - } else { - get_result(res_reg, res_size); - } - } - - if ((res_reg[0] & 0xf0) == 0x50) { - if ((res_reg[0] == SONY_NO_CIRC_ERR_BLK_STAT) - || (res_reg[0] == SONY_NO_LECC_ERR_BLK_STAT) - || (res_reg[0] == SONY_RECOV_LECC_ERR_BLK_STAT) - || (res_reg[0] == SONY_NO_ERR_DETECTION_STAT)) { - /* Ok, nothing to do. */ - } else { - printk(KERN_ERR PFX "Data block error: 0x%x\n", - res_reg[0]); - res_reg[0] = 0x20; - res_reg[1] = SONY_BAD_DATA_ERR; - *res_size = 2; - } - } else if ((res_reg[0] & 0xf0) != 0x20) { - /* The drive gave me bad status, I don't know what to do. - Reset the driver and return an error. */ - printk(KERN_NOTICE PFX "Invalid block status: 0x%x\n", - res_reg[0]); - restart_on_error(); - res_reg[0] = 0x20; - res_reg[1] = SONY_BAD_DATA_ERR; - *res_size = 2; - } - } -} - -/* Perform a raw data read. This will automatically detect the - track type and read the proper data (audio or data). */ -static int read_audio(struct cdrom_read_audio *ra) -{ - int retval; - unsigned char params[2]; - unsigned char res_reg[12]; - unsigned int res_size; - unsigned int cframe; - - if (down_interruptible(&sony_sem)) - return -ERESTARTSYS; - if (!sony_spun_up) - scd_spinup(); - - /* Set the drive to do raw operations. */ - params[0] = SONY_SD_DECODE_PARAM; - params[1] = 0x06 | sony_raw_data_mode; - do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD, - params, 2, res_reg, &res_size); - if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) { - printk(KERN_ERR PFX "Unable to set decode params: 0x%2.2x\n", - res_reg[1]); - retval = -EIO; - goto out_up; - } - - /* From here down, we have to goto exit_read_audio instead of returning - because the drive parameters have to be set back to data before - return. */ - - retval = 0; - if (start_request(ra->addr.lba, ra->nframes)) { - retval = -EIO; - goto exit_read_audio; - } - - /* For every requested frame. */ - cframe = 0; - while (cframe < ra->nframes) { - read_audio_data(audio_buffer, res_reg, &res_size); - if ((res_reg[0] & 0xf0) == 0x20) { - if (res_reg[1] == SONY_BAD_DATA_ERR) { - printk(KERN_ERR PFX "Data error on audio " - "sector %d\n", - ra->addr.lba + cframe); - } else if (res_reg[1] == SONY_ILL_TRACK_R_ERR) { - /* Illegal track type, change track types and start over. */ - sony_raw_data_mode = - (sony_raw_data_mode) ? 0 : 1; - - /* Set the drive mode. */ - params[0] = SONY_SD_DECODE_PARAM; - params[1] = 0x06 | sony_raw_data_mode; - do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD, - params, - 2, res_reg, &res_size); - if ((res_size < 2) - || ((res_reg[0] & 0xf0) == 0x20)) { - printk(KERN_ERR PFX "Unable to set " - "decode params: 0x%2.2x\n", - res_reg[1]); - retval = -EIO; - goto exit_read_audio; - } - - /* Restart the request on the current frame. */ - if (start_request - (ra->addr.lba + cframe, - ra->nframes - cframe)) { - retval = -EIO; - goto exit_read_audio; - } - - /* Don't go back to the top because don't want to get into - and infinite loop. A lot of code gets duplicated, but - that's no big deal, I don't guess. */ - read_audio_data(audio_buffer, res_reg, - &res_size); - if ((res_reg[0] & 0xf0) == 0x20) { - if (res_reg[1] == - SONY_BAD_DATA_ERR) { - printk(KERN_ERR PFX "Data error" - " on audio sector %d\n", - ra->addr.lba + - cframe); - } else { - printk(KERN_ERR PFX "Error reading audio data on sector %d: %s\n", - ra->addr.lba + cframe, - translate_error - (res_reg[1])); - retval = -EIO; - goto exit_read_audio; - } - } else if (copy_to_user(ra->buf + - (CD_FRAMESIZE_RAW - * cframe), - audio_buffer, - CD_FRAMESIZE_RAW)) { - retval = -EFAULT; - goto exit_read_audio; - } - } else { - printk(KERN_ERR PFX "Error reading audio " - "data on sector %d: %s\n", - ra->addr.lba + cframe, - translate_error(res_reg[1])); - retval = -EIO; - goto exit_read_audio; - } - } else if (copy_to_user(ra->buf + (CD_FRAMESIZE_RAW * cframe), - (char *)audio_buffer, - CD_FRAMESIZE_RAW)) { - retval = -EFAULT; - goto exit_read_audio; - } - - cframe++; - } - - get_result(res_reg, &res_size); - if ((res_reg[0] & 0xf0) == 0x20) { - printk(KERN_ERR PFX "Error return from audio read: %s\n", - translate_error(res_reg[1])); - retval = -EIO; - goto exit_read_audio; - } - - exit_read_audio: - - /* Set the drive mode back to the proper one for the disk. */ - params[0] = SONY_SD_DECODE_PARAM; - if (!sony_xa_mode) { - params[1] = 0x0f; - } else { - params[1] = 0x07; - } - do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD, - params, 2, res_reg, &res_size); - if ((res_size < 2) || ((res_reg[0] & 0xf0) == 0x20)) { - printk(KERN_ERR PFX "Unable to reset decode params: 0x%2.2x\n", - res_reg[1]); - retval = -EIO; - } - - out_up: - up(&sony_sem); - - return retval; -} - -static int -do_sony_cd_cmd_chk(const char *name, - unsigned char cmd, - unsigned char *params, - unsigned int num_params, - unsigned char *result_buffer, unsigned int *result_size) -{ - do_sony_cd_cmd(cmd, params, num_params, result_buffer, - result_size); - if ((*result_size < 2) || ((result_buffer[0] & 0xf0) == 0x20)) { - printk(KERN_ERR PFX "Error %s (CDROM%s)\n", - translate_error(result_buffer[1]), name); - return -EIO; - } - return 0; -} - -/* - * Uniform cdrom interface function - * open the tray - */ -static int scd_tray_move(struct cdrom_device_info *cdi, int position) -{ - int retval; - - if (down_interruptible(&sony_sem)) - return -ERESTARTSYS; - if (position == 1 /* open tray */ ) { - unsigned char res_reg[12]; - unsigned int res_size; - - do_sony_cd_cmd(SONY_AUDIO_STOP_CMD, NULL, 0, res_reg, - &res_size); - do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0, res_reg, - &res_size); - - sony_audio_status = CDROM_AUDIO_INVALID; - retval = do_sony_cd_cmd_chk("EJECT", SONY_EJECT_CMD, NULL, 0, - res_reg, &res_size); - } else { - if (0 == scd_spinup()) - sony_spun_up = 1; - retval = 0; - } - up(&sony_sem); - return retval; -} - -/* - * The big ugly ioctl handler. - */ -static int scd_audio_ioctl(struct cdrom_device_info *cdi, - unsigned int cmd, void *arg) -{ - unsigned char res_reg[12]; - unsigned int res_size; - unsigned char params[7]; - int i, retval; - - if (down_interruptible(&sony_sem)) - return -ERESTARTSYS; - switch (cmd) { - case CDROMSTART: /* Spin up the drive */ - retval = do_sony_cd_cmd_chk("START", SONY_SPIN_UP_CMD, NULL, - 0, res_reg, &res_size); - break; - - case CDROMSTOP: /* Spin down the drive */ - do_sony_cd_cmd(SONY_AUDIO_STOP_CMD, NULL, 0, res_reg, - &res_size); - - /* - * Spin the drive down, ignoring the error if the disk was - * already not spinning. - */ - sony_audio_status = CDROM_AUDIO_NO_STATUS; - retval = do_sony_cd_cmd_chk("STOP", SONY_SPIN_DOWN_CMD, NULL, - 0, res_reg, &res_size); - break; - - case CDROMPAUSE: /* Pause the drive */ - if (do_sony_cd_cmd_chk - ("PAUSE", SONY_AUDIO_STOP_CMD, NULL, 0, res_reg, - &res_size)) { - retval = -EIO; - break; - } - /* Get the current position and save it for resuming */ - if (read_subcode() < 0) { - retval = -EIO; - break; - } - cur_pos_msf[0] = last_sony_subcode.abs_msf[0]; - cur_pos_msf[1] = last_sony_subcode.abs_msf[1]; - cur_pos_msf[2] = last_sony_subcode.abs_msf[2]; - sony_audio_status = CDROM_AUDIO_PAUSED; - retval = 0; - break; - - case CDROMRESUME: /* Start the drive after being paused */ - if (sony_audio_status != CDROM_AUDIO_PAUSED) { - retval = -EINVAL; - break; - } - - do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg, - &res_size); - - /* Start the drive at the saved position. */ - params[1] = int_to_bcd(cur_pos_msf[0]); - params[2] = int_to_bcd(cur_pos_msf[1]); - params[3] = int_to_bcd(cur_pos_msf[2]); - params[4] = int_to_bcd(final_pos_msf[0]); - params[5] = int_to_bcd(final_pos_msf[1]); - params[6] = int_to_bcd(final_pos_msf[2]); - params[0] = 0x03; - if (do_sony_cd_cmd_chk - ("RESUME", SONY_AUDIO_PLAYBACK_CMD, params, 7, res_reg, - &res_size) < 0) { - retval = -EIO; - break; - } - sony_audio_status = CDROM_AUDIO_PLAY; - retval = 0; - break; - - case CDROMPLAYMSF: /* Play starting at the given MSF address. */ - do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg, - &res_size); - - /* The parameters are given in int, must be converted */ - for (i = 1; i < 7; i++) { - params[i] = - int_to_bcd(((unsigned char *) arg)[i - 1]); - } - params[0] = 0x03; - if (do_sony_cd_cmd_chk - ("PLAYMSF", SONY_AUDIO_PLAYBACK_CMD, params, 7, - res_reg, &res_size) < 0) { - retval = -EIO; - break; - } - - /* Save the final position for pauses and resumes */ - final_pos_msf[0] = bcd_to_int(params[4]); - final_pos_msf[1] = bcd_to_int(params[5]); - final_pos_msf[2] = bcd_to_int(params[6]); - sony_audio_status = CDROM_AUDIO_PLAY; - retval = 0; - break; - - case CDROMREADTOCHDR: /* Read the table of contents header */ - { - struct cdrom_tochdr *hdr; - - sony_get_toc(); - if (!sony_toc_read) { - retval = -EIO; - break; - } - - hdr = (struct cdrom_tochdr *) arg; - hdr->cdth_trk0 = sony_toc.first_track_num; - hdr->cdth_trk1 = sony_toc.last_track_num; - } - retval = 0; - break; - - case CDROMREADTOCENTRY: /* Read a given table of contents entry */ - { - struct cdrom_tocentry *entry; - int track_idx; - unsigned char *msf_val = NULL; - - sony_get_toc(); - if (!sony_toc_read) { - retval = -EIO; - break; - } - - entry = (struct cdrom_tocentry *) arg; - - track_idx = find_track(entry->cdte_track); - if (track_idx < 0) { - retval = -EINVAL; - break; - } - - entry->cdte_adr = - sony_toc.tracks[track_idx].address; - entry->cdte_ctrl = - sony_toc.tracks[track_idx].control; - msf_val = - sony_toc.tracks[track_idx].track_start_msf; - - /* Logical buffer address or MSF format requested? */ - if (entry->cdte_format == CDROM_LBA) { - entry->cdte_addr.lba = msf_to_log(msf_val); - } else if (entry->cdte_format == CDROM_MSF) { - entry->cdte_addr.msf.minute = *msf_val; - entry->cdte_addr.msf.second = - *(msf_val + 1); - entry->cdte_addr.msf.frame = - *(msf_val + 2); - } - } - retval = 0; - break; - - case CDROMPLAYTRKIND: /* Play a track. This currently ignores index. */ - { - struct cdrom_ti *ti = (struct cdrom_ti *) arg; - int track_idx; - - sony_get_toc(); - if (!sony_toc_read) { - retval = -EIO; - break; - } - - if ((ti->cdti_trk0 < sony_toc.first_track_num) - || (ti->cdti_trk0 > sony_toc.last_track_num) - || (ti->cdti_trk1 < ti->cdti_trk0)) { - retval = -EINVAL; - break; - } - - track_idx = find_track(ti->cdti_trk0); - if (track_idx < 0) { - retval = -EINVAL; - break; - } - params[1] = - int_to_bcd(sony_toc.tracks[track_idx]. - track_start_msf[0]); - params[2] = - int_to_bcd(sony_toc.tracks[track_idx]. - track_start_msf[1]); - params[3] = - int_to_bcd(sony_toc.tracks[track_idx]. - track_start_msf[2]); - - /* - * If we want to stop after the last track, use the lead-out - * MSF to do that. - */ - if (ti->cdti_trk1 >= sony_toc.last_track_num) { - track_idx = find_track(CDROM_LEADOUT); - } else { - track_idx = find_track(ti->cdti_trk1 + 1); - } - if (track_idx < 0) { - retval = -EINVAL; - break; - } - params[4] = - int_to_bcd(sony_toc.tracks[track_idx]. - track_start_msf[0]); - params[5] = - int_to_bcd(sony_toc.tracks[track_idx]. - track_start_msf[1]); - params[6] = - int_to_bcd(sony_toc.tracks[track_idx]. - track_start_msf[2]); - params[0] = 0x03; - - do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg, - &res_size); - - do_sony_cd_cmd(SONY_AUDIO_PLAYBACK_CMD, params, 7, - res_reg, &res_size); - - if ((res_size < 2) - || ((res_reg[0] & 0xf0) == 0x20)) { - printk(KERN_ERR PFX - "Params: %x %x %x %x %x %x %x\n", - params[0], params[1], params[2], - params[3], params[4], params[5], - params[6]); - printk(KERN_ERR PFX - "Error %s (CDROMPLAYTRKIND)\n", - translate_error(res_reg[1])); - retval = -EIO; - break; - } - - /* Save the final position for pauses and resumes */ - final_pos_msf[0] = bcd_to_int(params[4]); - final_pos_msf[1] = bcd_to_int(params[5]); - final_pos_msf[2] = bcd_to_int(params[6]); - sony_audio_status = CDROM_AUDIO_PLAY; - retval = 0; - break; - } - - case CDROMVOLCTRL: /* Volume control. What volume does this change, anyway? */ - { - struct cdrom_volctrl *volctrl = - (struct cdrom_volctrl *) arg; - - params[0] = SONY_SD_AUDIO_VOLUME; - params[1] = volctrl->channel0; - params[2] = volctrl->channel1; - retval = do_sony_cd_cmd_chk("VOLCTRL", - SONY_SET_DRIVE_PARAM_CMD, - params, 3, res_reg, - &res_size); - break; - } - case CDROMSUBCHNL: /* Get subchannel info */ - retval = sony_get_subchnl_info((struct cdrom_subchnl *) arg); - break; - - default: - retval = -EINVAL; - break; - } - up(&sony_sem); - return retval; -} - -static int scd_read_audio(struct cdrom_device_info *cdi, - unsigned int cmd, unsigned long arg) -{ - void __user *argp = (void __user *)arg; - int retval; - - if (down_interruptible(&sony_sem)) - return -ERESTARTSYS; - switch (cmd) { - case CDROMREADAUDIO: /* Read 2352 byte audio tracks and 2340 byte - raw data tracks. */ - { - struct cdrom_read_audio ra; - - - sony_get_toc(); - if (!sony_toc_read) { - retval = -EIO; - break; - } - - if (copy_from_user(&ra, argp, sizeof(ra))) { - retval = -EFAULT; - break; - } - - if (ra.nframes == 0) { - retval = 0; - break; - } - - if (!access_ok(VERIFY_WRITE, ra.buf, - CD_FRAMESIZE_RAW * ra.nframes)) - return -EFAULT; - - if (ra.addr_format == CDROM_LBA) { - if ((ra.addr.lba >= - sony_toc.lead_out_start_lba) - || (ra.addr.lba + ra.nframes >= - sony_toc.lead_out_start_lba)) { - retval = -EINVAL; - break; - } - } else if (ra.addr_format == CDROM_MSF) { - if ((ra.addr.msf.minute >= 75) - || (ra.addr.msf.second >= 60) - || (ra.addr.msf.frame >= 75)) { - retval = -EINVAL; - break; - } - - ra.addr.lba = ((ra.addr.msf.minute * 4500) - + (ra.addr.msf.second * 75) - + ra.addr.msf.frame); - if ((ra.addr.lba >= - sony_toc.lead_out_start_lba) - || (ra.addr.lba + ra.nframes >= - sony_toc.lead_out_start_lba)) { - retval = -EINVAL; - break; - } - - /* I know, this can go negative on an unsigned. However, - the first thing done to the data is to add this value, - so this should compensate and allow direct msf access. */ - ra.addr.lba -= LOG_START_OFFSET; - } else { - retval = -EINVAL; - break; - } - - retval = read_audio(&ra); - break; - } - retval = 0; - break; - - default: - retval = -EINVAL; - } - up(&sony_sem); - return retval; -} - -static int scd_spinup(void) -{ - unsigned char res_reg[12]; - unsigned int res_size; - int num_spin_ups; - - num_spin_ups = 0; - - respinup_on_open: - do_sony_cd_cmd(SONY_SPIN_UP_CMD, NULL, 0, res_reg, &res_size); - - /* The drive sometimes returns error 0. I don't know why, but ignore - it. It seems to mean the drive has already done the operation. */ - if ((res_size < 2) || ((res_reg[0] != 0) && (res_reg[1] != 0))) { - printk(KERN_ERR PFX "%s error (scd_open, spin up)\n", - translate_error(res_reg[1])); - return 1; - } - - do_sony_cd_cmd(SONY_READ_TOC_CMD, NULL, 0, res_reg, &res_size); - - /* The drive sometimes returns error 0. I don't know why, but ignore - it. It seems to mean the drive has already done the operation. */ - if ((res_size < 2) || ((res_reg[0] != 0) && (res_reg[1] != 0))) { - /* If the drive is already playing, it's ok. */ - if ((res_reg[1] == SONY_AUDIO_PLAYING_ERR) - || (res_reg[1] == 0)) { - return 0; - } - - /* If the drive says it is not spun up (even though we just did it!) - then retry the operation at least a few times. */ - if ((res_reg[1] == SONY_NOT_SPIN_ERR) - && (num_spin_ups < MAX_CDU31A_RETRIES)) { - num_spin_ups++; - goto respinup_on_open; - } - - printk(KERN_ERR PFX "Error %s (scd_open, read toc)\n", - translate_error(res_reg[1])); - do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0, res_reg, - &res_size); - return 1; - } - return 0; -} - -/* - * Open the drive for operations. Spin the drive up and read the table of - * contents if these have not already been done. - */ -static int scd_open(struct cdrom_device_info *cdi, int purpose) -{ - unsigned char res_reg[12]; - unsigned int res_size; - unsigned char params[2]; - - if (purpose == 1) { - /* Open for IOCTLs only - no media check */ - sony_usage++; - return 0; - } - - if (sony_usage == 0) { - if (scd_spinup() != 0) - return -EIO; - sony_get_toc(); - if (!sony_toc_read) { - do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0, - res_reg, &res_size); - return -EIO; - } - - /* For XA on the CDU31A only, we have to do special reads. - The CDU33A handles XA automagically. */ - /* if ( (sony_toc.disk_type == SONY_XA_DISK_TYPE) */ - if ((sony_toc.disk_type != 0x00) - && (!is_double_speed)) { - params[0] = SONY_SD_DECODE_PARAM; - params[1] = 0x07; - do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD, - params, 2, res_reg, &res_size); - if ((res_size < 2) - || ((res_reg[0] & 0xf0) == 0x20)) { - printk(KERN_WARNING PFX "Unable to set " - "XA params: 0x%2.2x\n", res_reg[1]); - } - sony_xa_mode = 1; - } - /* A non-XA disk. Set the parms back if necessary. */ - else if (sony_xa_mode) { - params[0] = SONY_SD_DECODE_PARAM; - params[1] = 0x0f; - do_sony_cd_cmd(SONY_SET_DRIVE_PARAM_CMD, - params, 2, res_reg, &res_size); - if ((res_size < 2) - || ((res_reg[0] & 0xf0) == 0x20)) { - printk(KERN_WARNING PFX "Unable to reset " - "XA params: 0x%2.2x\n", res_reg[1]); - } - sony_xa_mode = 0; - } - - sony_spun_up = 1; - } - - sony_usage++; - - return 0; -} - - -/* - * Close the drive. Spin it down if no task is using it. The spin - * down will fail if playing audio, so audio play is OK. - */ -static void scd_release(struct cdrom_device_info *cdi) -{ - if (sony_usage == 1) { - unsigned char res_reg[12]; - unsigned int res_size; - - do_sony_cd_cmd(SONY_SPIN_DOWN_CMD, NULL, 0, res_reg, - &res_size); - - sony_spun_up = 0; - } - sony_usage--; -} - -static struct cdrom_device_ops scd_dops = { - .open = scd_open, - .release = scd_release, - .drive_status = scd_drive_status, - .media_changed = scd_media_changed, - .tray_move = scd_tray_move, - .lock_door = scd_lock_door, - .select_speed = scd_select_speed, - .get_last_session = scd_get_last_session, - .get_mcn = scd_get_mcn, - .reset = scd_reset, - .audio_ioctl = scd_audio_ioctl, - .capability = CDC_OPEN_TRAY | CDC_CLOSE_TRAY | CDC_LOCK | - CDC_SELECT_SPEED | CDC_MULTI_SESSION | - CDC_MCN | CDC_MEDIA_CHANGED | CDC_PLAY_AUDIO | - CDC_RESET | CDC_DRIVE_STATUS, - .n_minors = 1, -}; - -static struct cdrom_device_info scd_info = { - .ops = &scd_dops, - .speed = 2, - .capacity = 1, - .name = "cdu31a" -}; - -static int scd_block_open(struct inode *inode, struct file *file) -{ - return cdrom_open(&scd_info, inode, file); -} - -static int scd_block_release(struct inode *inode, struct file *file) -{ - return cdrom_release(&scd_info, file); -} - -static int scd_block_ioctl(struct inode *inode, struct file *file, - unsigned cmd, unsigned long arg) -{ - int retval; - - /* The eject and close commands should be handled by Uniform CD-ROM - * driver - but I always got hard lockup instead of eject - * until I put this here. - */ - switch (cmd) { - case CDROMEJECT: - scd_lock_door(&scd_info, 0); - retval = scd_tray_move(&scd_info, 1); - break; - case CDROMCLOSETRAY: - retval = scd_tray_move(&scd_info, 0); - break; - case CDROMREADAUDIO: - retval = scd_read_audio(&scd_info, CDROMREADAUDIO, arg); - break; - default: - retval = cdrom_ioctl(file, &scd_info, inode, cmd, arg); - } - return retval; -} - -static int scd_block_media_changed(struct gendisk *disk) -{ - return cdrom_media_changed(&scd_info); -} - -static struct block_device_operations scd_bdops = -{ - .owner = THIS_MODULE, - .open = scd_block_open, - .release = scd_block_release, - .ioctl = scd_block_ioctl, - .media_changed = scd_block_media_changed, -}; - -static struct gendisk *scd_gendisk; - -/* The different types of disc loading mechanisms supported */ -static char *load_mech[] __initdata = - { "caddy", "tray", "pop-up", "unknown" }; - -static int __init -get_drive_configuration(unsigned short base_io, - unsigned char res_reg[], unsigned int *res_size) -{ - unsigned long retry_count; - - - if (!request_region(base_io, 4, "cdu31a")) - return 0; - - /* Set the base address */ - cdu31a_port = base_io; - - /* Set up all the register locations */ - sony_cd_cmd_reg = cdu31a_port + SONY_CMD_REG_OFFSET; - sony_cd_param_reg = cdu31a_port + SONY_PARAM_REG_OFFSET; - sony_cd_write_reg = cdu31a_port + SONY_WRITE_REG_OFFSET; - sony_cd_control_reg = cdu31a_port + SONY_CONTROL_REG_OFFSET; - sony_cd_status_reg = cdu31a_port + SONY_STATUS_REG_OFFSET; - sony_cd_result_reg = cdu31a_port + SONY_RESULT_REG_OFFSET; - sony_cd_read_reg = cdu31a_port + SONY_READ_REG_OFFSET; - sony_cd_fifost_reg = cdu31a_port + SONY_FIFOST_REG_OFFSET; - - /* - * Check to see if anything exists at the status register location. - * I don't know if this is a good way to check, but it seems to work - * ok for me. - */ - if (read_status_register() != 0xff) { - /* - * Reset the drive and wait for attention from it (to say it's reset). - * If you don't wait, the next operation will probably fail. - */ - reset_drive(); - retry_count = jiffies + SONY_RESET_TIMEOUT; - while (time_before(jiffies, retry_count) - && (!is_attention())) { - sony_sleep(); - } - -#if 0 - /* If attention is never seen probably not a CDU31a present */ - if (!is_attention()) { - res_reg[0] = 0x20; - goto out_err; - } -#endif - - /* - * Get the drive configuration. - */ - do_sony_cd_cmd(SONY_REQ_DRIVE_CONFIG_CMD, - NULL, - 0, (unsigned char *) res_reg, res_size); - if (*res_size <= 2 || (res_reg[0] & 0xf0) != 0) - goto out_err; - return 1; - } - - /* Return an error */ - res_reg[0] = 0x20; -out_err: - release_region(cdu31a_port, 4); - cdu31a_port = 0; - return 0; -} - -#ifndef MODULE -/* - * Set up base I/O and interrupts, called from main.c. - */ - -static int __init cdu31a_setup(char *strings) -{ - int ints[4]; - - (void) get_options(strings, ARRAY_SIZE(ints), ints); - - if (ints[0] > 0) { - cdu31a_port = ints[1]; - } - if (ints[0] > 1) { - cdu31a_irq = ints[2]; - } - if ((strings != NULL) && (*strings != '\0')) { - if (strcmp(strings, "PAS") == 0) { - sony_pas_init = 1; - } else { - printk(KERN_NOTICE PFX "Unknown interface type: %s\n", - strings); - } - } - - return 1; -} - -__setup("cdu31a=", cdu31a_setup); - -#endif - -/* - * Initialize the driver. - */ -int __init cdu31a_init(void) -{ - struct s_sony_drive_config drive_config; - struct gendisk *disk; - int deficiency = 0; - unsigned int res_size; - char msg[255]; - char buf[40]; - int i; - int tmp_irq; - - /* - * According to Alex Freed (freed@europa.orion.adobe.com), this is - * required for the Fusion CD-16 package. If the sound driver is - * loaded, it should work fine, but just in case... - * - * The following turn on the CD-ROM interface for a Fusion CD-16. - */ - if (sony_pas_init) { - outb(0xbc, 0x9a01); - outb(0xe2, 0x9a01); - } - - /* Setting the base I/O address to 0xffff will disable it. */ - if (cdu31a_port == 0xffff) - goto errout3; - - if (cdu31a_port != 0) { - /* Need IRQ 0 because we can't sleep here. */ - tmp_irq = cdu31a_irq; - cdu31a_irq = 0; - if (!get_drive_configuration(cdu31a_port, - drive_config.exec_status, - &res_size)) - goto errout3; - cdu31a_irq = tmp_irq; - } else { - cdu31a_irq = 0; - for (i = 0; cdu31a_addresses[i].base; i++) { - if (get_drive_configuration(cdu31a_addresses[i].base, - drive_config.exec_status, - &res_size)) { - cdu31a_irq = cdu31a_addresses[i].int_num; - break; - } - } - if (!cdu31a_port) - goto errout3; - } - - if (register_blkdev(MAJOR_NR, "cdu31a")) - goto errout2; - - disk = alloc_disk(1); - if (!disk) - goto errout1; - disk->major = MAJOR_NR; - disk->first_minor = 0; - sprintf(disk->disk_name, "cdu31a"); - disk->fops = &scd_bdops; - disk->flags = GENHD_FL_CD; - - if (SONY_HWC_DOUBLE_SPEED(drive_config)) - is_double_speed = 1; - - tmp_irq = cdu31a_irq; /* Need IRQ 0 because we can't sleep here. */ - cdu31a_irq = 0; - - sony_speed = is_double_speed; /* Set 2X drives to 2X by default */ - set_drive_params(sony_speed); - - cdu31a_irq = tmp_irq; - - if (cdu31a_irq > 0) { - if (request_irq - (cdu31a_irq, cdu31a_interrupt, IRQF_DISABLED, - "cdu31a", NULL)) { - printk(KERN_WARNING PFX "Unable to grab IRQ%d for " - "the CDU31A driver\n", cdu31a_irq); - cdu31a_irq = 0; - } - } - - sprintf(msg, "Sony I/F CDROM : %8.8s %16.16s %8.8s\n", - drive_config.vendor_id, - drive_config.product_id, - drive_config.product_rev_level); - sprintf(buf, " Capabilities: %s", - load_mech[SONY_HWC_GET_LOAD_MECH(drive_config)]); - strcat(msg, buf); - if (SONY_HWC_AUDIO_PLAYBACK(drive_config)) - strcat(msg, ", audio"); - else - deficiency |= CDC_PLAY_AUDIO; - if (SONY_HWC_EJECT(drive_config)) - strcat(msg, ", eject"); - else - deficiency |= CDC_OPEN_TRAY; - if (SONY_HWC_LED_SUPPORT(drive_config)) - strcat(msg, ", LED"); - if (SONY_HWC_ELECTRIC_VOLUME(drive_config)) - strcat(msg, ", elec. Vol"); - if (SONY_HWC_ELECTRIC_VOLUME_CTL(drive_config)) - strcat(msg, ", sep. Vol"); - if (is_double_speed) - strcat(msg, ", double speed"); - else - deficiency |= CDC_SELECT_SPEED; - if (cdu31a_irq > 0) { - sprintf(buf, ", irq %d", cdu31a_irq); - strcat(msg, buf); - } - strcat(msg, "\n"); - printk(KERN_INFO PFX "%s",msg); - - cdu31a_queue = blk_init_queue(do_cdu31a_request, &cdu31a_lock); - if (!cdu31a_queue) - goto errout0; - blk_queue_hardsect_size(cdu31a_queue, 2048); - - init_timer(&cdu31a_abort_timer); - cdu31a_abort_timer.function = handle_abort_timeout; - - scd_info.mask = deficiency; - scd_gendisk = disk; - if (register_cdrom(&scd_info)) - goto err; - disk->queue = cdu31a_queue; - add_disk(disk); - - disk_changed = 1; - return 0; - -err: - blk_cleanup_queue(cdu31a_queue); -errout0: - if (cdu31a_irq) - free_irq(cdu31a_irq, NULL); - printk(KERN_ERR PFX "Unable to register with Uniform cdrom driver\n"); - put_disk(disk); -errout1: - if (unregister_blkdev(MAJOR_NR, "cdu31a")) { - printk(KERN_WARNING PFX "Can't unregister block device\n"); - } -errout2: - release_region(cdu31a_port, 4); -errout3: - return -EIO; -} - - -static void __exit cdu31a_exit(void) -{ - del_gendisk(scd_gendisk); - put_disk(scd_gendisk); - if (unregister_cdrom(&scd_info)) { - printk(KERN_WARNING PFX "Can't unregister from Uniform " - "cdrom driver\n"); - return; - } - if ((unregister_blkdev(MAJOR_NR, "cdu31a") == -EINVAL)) { - printk(KERN_WARNING PFX "Can't unregister\n"); - return; - } - - blk_cleanup_queue(cdu31a_queue); - - if (cdu31a_irq > 0) - free_irq(cdu31a_irq, NULL); - - release_region(cdu31a_port, 4); - printk(KERN_INFO PFX "module released.\n"); -} - -#ifdef MODULE -module_init(cdu31a_init); -#endif -module_exit(cdu31a_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS_BLOCKDEV_MAJOR(CDU31A_CDROM_MAJOR); diff --git a/drivers/cdrom/cdu31a.h b/drivers/cdrom/cdu31a.h deleted file mode 100644 index 61d4768c412..00000000000 --- a/drivers/cdrom/cdu31a.h +++ /dev/null @@ -1,411 +0,0 @@ -/* - * Definitions for a Sony interface CDROM drive. - * - * Corey Minyard (minyard@wf-rch.cirr.com) - * - * Copyright (C) 1993 Corey Minyard - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -/* - * General defines. - */ -#define SONY_XA_DISK_TYPE 0x20 - -/* - * Offsets (from the base address) and bits for the various write registers - * of the drive. - */ -#define SONY_CMD_REG_OFFSET 0 -#define SONY_PARAM_REG_OFFSET 1 -#define SONY_WRITE_REG_OFFSET 2 -#define SONY_CONTROL_REG_OFFSET 3 -# define SONY_ATTN_CLR_BIT 0x01 -# define SONY_RES_RDY_CLR_BIT 0x02 -# define SONY_DATA_RDY_CLR_BIT 0x04 -# define SONY_ATTN_INT_EN_BIT 0x08 -# define SONY_RES_RDY_INT_EN_BIT 0x10 -# define SONY_DATA_RDY_INT_EN_BIT 0x20 -# define SONY_PARAM_CLR_BIT 0x40 -# define SONY_DRIVE_RESET_BIT 0x80 - -/* - * Offsets (from the base address) and bits for the various read registers - * of the drive. - */ -#define SONY_STATUS_REG_OFFSET 0 -# define SONY_ATTN_BIT 0x01 -# define SONY_RES_RDY_BIT 0x02 -# define SONY_DATA_RDY_BIT 0x04 -# define SONY_ATTN_INT_ST_BIT 0x08 -# define SONY_RES_RDY_INT_ST_BIT 0x10 -# define SONY_DATA_RDY_INT_ST_BIT 0x20 -# define SONY_DATA_REQUEST_BIT 0x40 -# define SONY_BUSY_BIT 0x80 -#define SONY_RESULT_REG_OFFSET 1 -#define SONY_READ_REG_OFFSET 2 -#define SONY_FIFOST_REG_OFFSET 3 -# define SONY_PARAM_WRITE_RDY_BIT 0x01 -# define SONY_PARAM_REG_EMPTY_BIT 0x02 -# define SONY_RES_REG_NOT_EMP_BIT 0x04 -# define SONY_RES_REG_FULL_BIT 0x08 - -#define LOG_START_OFFSET 150 /* Offset of first logical sector */ - -#define SONY_DETECT_TIMEOUT (8*HZ/10) /* Maximum amount of time - that drive detection code - will wait for response - from drive (in 1/100th's - of seconds). */ - -#define SONY_JIFFIES_TIMEOUT (10*HZ) /* Maximum number of times the - drive will wait/try for an - operation */ -#define SONY_RESET_TIMEOUT HZ /* Maximum number of times the - drive will wait/try a reset - operation */ -#define SONY_READY_RETRIES 20000 /* How many times to retry a - spin waiting for a register - to come ready */ - -#define MAX_CDU31A_RETRIES 3 /* How many times to retry an - operation */ - -/* Commands to request or set drive control parameters and disc information */ -#define SONY_REQ_DRIVE_CONFIG_CMD 0x00 /* Returns s_sony_drive_config */ -#define SONY_REQ_DRIVE_MODE_CMD 0x01 -#define SONY_REQ_DRIVE_PARAM_CMD 0x02 -#define SONY_REQ_MECH_STATUS_CMD 0x03 -#define SONY_REQ_AUDIO_STATUS_CMD 0x04 -#define SONY_SET_DRIVE_PARAM_CMD 0x10 -#define SONY_REQ_TOC_DATA_CMD 0x20 /* Returns s_sony_toc */ -#define SONY_REQ_SUBCODE_ADDRESS_CMD 0x21 /* Returns s_sony_subcode */ -#define SONY_REQ_UPC_EAN_CMD 0x22 -#define SONY_REQ_ISRC_CMD 0x23 -#define SONY_REQ_TOC_DATA_SPEC_CMD 0x24 /* Returns s_sony_session_toc */ - -/* Commands to request information from the drive */ -#define SONY_READ_TOC_CMD 0x30 /* let the drive firmware grab the TOC */ -#define SONY_SEEK_CMD 0x31 -#define SONY_READ_CMD 0x32 -#define SONY_READ_BLKERR_STAT_CMD 0x34 -#define SONY_ABORT_CMD 0x35 -#define SONY_READ_TOC_SPEC_CMD 0x36 - -/* Commands to control audio */ -#define SONY_AUDIO_PLAYBACK_CMD 0x40 -#define SONY_AUDIO_STOP_CMD 0x41 -#define SONY_AUDIO_SCAN_CMD 0x42 - -/* Miscellaneous control commands */ -#define SONY_EJECT_CMD 0x50 -#define SONY_SPIN_UP_CMD 0x51 -#define SONY_SPIN_DOWN_CMD 0x52 - -/* Diagnostic commands */ -#define SONY_WRITE_BUFFER_CMD 0x60 -#define SONY_READ_BUFFER_CMD 0x61 -#define SONY_DIAGNOSTICS_CMD 0x62 - - -/* - * The following are command parameters for the set drive parameter command - */ -#define SONY_SD_DECODE_PARAM 0x00 -#define SONY_SD_INTERFACE_PARAM 0x01 -#define SONY_SD_BUFFERING_PARAM 0x02 -#define SONY_SD_AUDIO_PARAM 0x03 -#define SONY_SD_AUDIO_VOLUME 0x04 -#define SONY_SD_MECH_CONTROL 0x05 -#define SONY_SD_AUTO_SPIN_DOWN_TIME 0x06 - -/* - * The following are parameter bits for the mechanical control command - */ -#define SONY_AUTO_SPIN_UP_BIT 0x01 -#define SONY_AUTO_EJECT_BIT 0x02 -#define SONY_DOUBLE_SPEED_BIT 0x04 - -/* - * The following extract information from the drive configuration about - * the drive itself. - */ -#define SONY_HWC_GET_LOAD_MECH(c) (c.hw_config[0] & 0x03) -#define SONY_HWC_EJECT(c) (c.hw_config[0] & 0x04) -#define SONY_HWC_LED_SUPPORT(c) (c.hw_config[0] & 0x08) -#define SONY_HWC_DOUBLE_SPEED(c) (c.hw_config[0] & 0x10) -#define SONY_HWC_GET_BUF_MEM_SIZE(c) ((c.hw_config[0] & 0xc0) >> 6) -#define SONY_HWC_AUDIO_PLAYBACK(c) (c.hw_config[1] & 0x01) -#define SONY_HWC_ELECTRIC_VOLUME(c) (c.hw_config[1] & 0x02) -#define SONY_HWC_ELECTRIC_VOLUME_CTL(c) (c.hw_config[1] & 0x04) - -#define SONY_HWC_CADDY_LOAD_MECH 0x00 -#define SONY_HWC_TRAY_LOAD_MECH 0x01 -#define SONY_HWC_POPUP_LOAD_MECH 0x02 -#define SONY_HWC_UNKWN_LOAD_MECH 0x03 - -#define SONY_HWC_8KB_BUFFER 0x00 -#define SONY_HWC_32KB_BUFFER 0x01 -#define SONY_HWC_64KB_BUFFER 0x02 -#define SONY_HWC_UNKWN_BUFFER 0x03 - -/* - * This is the complete status returned from the drive configuration request - * command. - */ -struct s_sony_drive_config -{ - unsigned char exec_status[2]; - char vendor_id[8]; - char product_id[16]; - char product_rev_level[8]; - unsigned char hw_config[2]; -}; - -/* The following is returned from the request subcode address command */ -struct s_sony_subcode -{ - unsigned char exec_status[2]; - unsigned char address :4; - unsigned char control :4; - unsigned char track_num; - unsigned char index_num; - unsigned char rel_msf[3]; - unsigned char reserved1; - unsigned char abs_msf[3]; -}; - -#define MAX_TRACKS 100 /* The maximum tracks a disk may have. */ -/* - * The following is returned from the request TOC (Table Of Contents) command. - * (last_track_num-first_track_num+1) values are valid in tracks. - */ -struct s_sony_toc -{ - unsigned char exec_status[2]; - unsigned char address0 :4; - unsigned char control0 :4; - unsigned char point0; - unsigned char first_track_num; - unsigned char disk_type; - unsigned char dummy0; - unsigned char address1 :4; - unsigned char control1 :4; - unsigned char point1; - unsigned char last_track_num; - unsigned char dummy1; - unsigned char dummy2; - unsigned char address2 :4; - unsigned char control2 :4; - unsigned char point2; - unsigned char lead_out_start_msf[3]; - struct - { - unsigned char address :4; - unsigned char control :4; - unsigned char track; - unsigned char track_start_msf[3]; - } tracks[MAX_TRACKS]; - - unsigned int lead_out_start_lba; -}; - -struct s_sony_session_toc -{ - unsigned char exec_status[2]; - unsigned char session_number; - unsigned char address0 :4; - unsigned char control0 :4; - unsigned char point0; - unsigned char first_track_num; - unsigned char disk_type; - unsigned char dummy0; - unsigned char address1 :4; - unsigned char control1 :4; - unsigned char point1; - unsigned char last_track_num; - unsigned char dummy1; - unsigned char dummy2; - unsigned char address2 :4; - unsigned char control2 :4; - unsigned char point2; - unsigned char lead_out_start_msf[3]; - unsigned char addressb0 :4; - unsigned char controlb0 :4; - unsigned char pointb0; - unsigned char next_poss_prog_area_msf[3]; - unsigned char num_mode_5_pointers; - unsigned char max_start_outer_leadout_msf[3]; - unsigned char addressb1 :4; - unsigned char controlb1 :4; - unsigned char pointb1; - unsigned char dummyb0_1[4]; - unsigned char num_skip_interval_pointers; - unsigned char num_skip_track_assignments; - unsigned char dummyb0_2; - unsigned char addressb2 :4; - unsigned char controlb2 :4; - unsigned char pointb2; - unsigned char tracksb2[7]; - unsigned char addressb3 :4; - unsigned char controlb3 :4; - unsigned char pointb3; - unsigned char tracksb3[7]; - unsigned char addressb4 :4; - unsigned char controlb4 :4; - unsigned char pointb4; - unsigned char tracksb4[7]; - unsigned char addressc0 :4; - unsigned char controlc0 :4; - unsigned char pointc0; - unsigned char dummyc0[7]; - struct - { - unsigned char address :4; - unsigned char control :4; - unsigned char track; - unsigned char track_start_msf[3]; - } tracks[MAX_TRACKS]; - - unsigned int start_track_lba; - unsigned int lead_out_start_lba; - unsigned int mint; - unsigned int maxt; -}; - -struct s_all_sessions_toc -{ - unsigned char sessions; - unsigned int track_entries; - unsigned char first_track_num; - unsigned char last_track_num; - unsigned char disk_type; - unsigned char lead_out_start_msf[3]; - struct - { - unsigned char address :4; - unsigned char control :4; - unsigned char track; - unsigned char track_start_msf[3]; - } tracks[MAX_TRACKS]; - - unsigned int start_track_lba; - unsigned int lead_out_start_lba; -}; - - -/* - * The following are errors returned from the drive. - */ - -/* Command error group */ -#define SONY_ILL_CMD_ERR 0x10 -#define SONY_ILL_PARAM_ERR 0x11 - -/* Mechanism group */ -#define SONY_NOT_LOAD_ERR 0x20 -#define SONY_NO_DISK_ERR 0x21 -#define SONY_NOT_SPIN_ERR 0x22 -#define SONY_SPIN_ERR 0x23 -#define SONY_SPINDLE_SERVO_ERR 0x25 -#define SONY_FOCUS_SERVO_ERR 0x26 -#define SONY_EJECT_MECH_ERR 0x29 -#define SONY_AUDIO_PLAYING_ERR 0x2a -#define SONY_EMERGENCY_EJECT_ERR 0x2c - -/* Seek error group */ -#define SONY_FOCUS_ERR 0x30 -#define SONY_FRAME_SYNC_ERR 0x31 -#define SONY_SUBCODE_ADDR_ERR 0x32 -#define SONY_BLOCK_SYNC_ERR 0x33 -#define SONY_HEADER_ADDR_ERR 0x34 - -/* Read error group */ -#define SONY_ILL_TRACK_R_ERR 0x40 -#define SONY_MODE_0_R_ERR 0x41 -#define SONY_ILL_MODE_R_ERR 0x42 -#define SONY_ILL_BLOCK_SIZE_R_ERR 0x43 -#define SONY_MODE_R_ERR 0x44 -#define SONY_FORM_R_ERR 0x45 -#define SONY_LEAD_OUT_R_ERR 0x46 -#define SONY_BUFFER_OVERRUN_R_ERR 0x47 - -/* Data error group */ -#define SONY_UNREC_CIRC_ERR 0x53 -#define SONY_UNREC_LECC_ERR 0x57 - -/* Subcode error group */ -#define SONY_NO_TOC_ERR 0x60 -#define SONY_SUBCODE_DATA_NVAL_ERR 0x61 -#define SONY_FOCUS_ON_TOC_READ_ERR 0x63 -#define SONY_FRAME_SYNC_ON_TOC_READ_ERR 0x64 -#define SONY_TOC_DATA_ERR 0x65 - -/* Hardware failure group */ -#define SONY_HW_FAILURE_ERR 0x70 -#define SONY_LEAD_IN_A_ERR 0x91 -#define SONY_LEAD_OUT_A_ERR 0x92 -#define SONY_DATA_TRACK_A_ERR 0x93 - -/* - * The following are returned from the Read With Block Error Status command. - * They are not errors but information (Errors from the 0x5x group above may - * also be returned - */ -#define SONY_NO_CIRC_ERR_BLK_STAT 0x50 -#define SONY_NO_LECC_ERR_BLK_STAT 0x54 -#define SONY_RECOV_LECC_ERR_BLK_STAT 0x55 -#define SONY_NO_ERR_DETECTION_STAT 0x59 - -/* - * The following is not an error returned by the drive, but by the code - * that talks to the drive. It is returned because of a timeout. - */ -#define SONY_TIMEOUT_OP_ERR 0x01 -#define SONY_SIGNAL_OP_ERR 0x02 -#define SONY_BAD_DATA_ERR 0x03 - - -/* - * The following are attention code for asynchronous events from the drive. - */ - -/* Standard attention group */ -#define SONY_EMER_EJECT_ATTN 0x2c -#define SONY_HW_FAILURE_ATTN 0x70 -#define SONY_MECH_LOADED_ATTN 0x80 -#define SONY_EJECT_PUSHED_ATTN 0x81 - -/* Audio attention group */ -#define SONY_AUDIO_PLAY_DONE_ATTN 0x90 -#define SONY_LEAD_IN_ERR_ATTN 0x91 -#define SONY_LEAD_OUT_ERR_ATTN 0x92 -#define SONY_DATA_TRACK_ERR_ATTN 0x93 -#define SONY_AUDIO_PLAYBACK_ERR_ATTN 0x94 - -/* Auto spin up group */ -#define SONY_SPIN_UP_COMPLETE_ATTN 0x24 -#define SONY_SPINDLE_SERVO_ERR_ATTN 0x25 -#define SONY_FOCUS_SERVO_ERR_ATTN 0x26 -#define SONY_TOC_READ_DONE_ATTN 0x62 -#define SONY_FOCUS_ON_TOC_READ_ERR_ATTN 0x63 -#define SONY_SYNC_ON_TOC_READ_ERR_ATTN 0x65 - -/* Auto eject group */ -#define SONY_SPIN_DOWN_COMPLETE_ATTN 0x27 -#define SONY_EJECT_COMPLETE_ATTN 0x28 -#define SONY_EJECT_MECH_ERR_ATTN 0x29 diff --git a/drivers/cdrom/cm206.c b/drivers/cdrom/cm206.c deleted file mode 100644 index 23013116324..00000000000 --- a/drivers/cdrom/cm206.c +++ /dev/null @@ -1,1594 +0,0 @@ -/* cm206.c. A linux-driver for the cm206 cdrom player with cm260 adapter card. - Copyright (c) 1995--1997 David A. van Leeuwen. - $Id: cm206.c,v 1.5 1997/12/26 11:02:51 david Exp $ - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -History: - Started 25 jan 1994. Waiting for documentation... - 22 feb 1995: 0.1a first reasonably safe polling driver. - Two major bugs, one in read_sector and one in - do_cm206_request, happened to cancel! - 25 feb 1995: 0.2a first reasonable interrupt driven version of above. - uart writes are still done in polling mode. - 25 feb 1995: 0.21a writes also in interrupt mode, still some - small bugs to be found... Larger buffer. - 2 mrt 1995: 0.22 Bug found (cd-> nowhere, interrupt was called in - initialization), read_ahead of 16. Timeouts implemented. - unclear if they do something... - 7 mrt 1995: 0.23 Start of background read-ahead. - 18 mrt 1995: 0.24 Working background read-ahead. (still problems) - 26 mrt 1995: 0.25 Multi-session ioctl added (kernel v1.2). - Statistics implemented, though separate stats206.h. - Accessible through ioctl 0x1000 (just a number). - Hard to choose between v1.2 development and 1.1.75. - Bottom-half doesn't work with 1.2... - 0.25a: fixed... typo. Still problems... - 1 apr 1995: 0.26 Module support added. Most bugs found. Use kernel 1.2.n. - 5 apr 1995: 0.27 Auto-probe for the adapter card base address. - Auto-probe for the adaptor card irq line. - 7 apr 1995: 0.28 Added lilo setup support for base address and irq. - Use major number 32 (not in this source), officially - assigned to this driver. - 9 apr 1995: 0.29 Added very limited audio support. Toc_header, stop, pause, - resume, eject. Play_track ignores track info, because we can't - read a table-of-contents entry. Toc_entry is implemented - as a `placebo' function: always returns start of disc. - 3 may 1995: 0.30 Audio support completed. The get_toc_entry function - is implemented as a binary search. - 15 may 1995: 0.31 More work on audio stuff. Workman is not easy to - satisfy; changed binary search into linear search. - Auto-probe for base address somewhat relaxed. - 1 jun 1995: 0.32 Removed probe_irq_on/off for module version. - 10 jun 1995: 0.33 Workman still behaves funny, but you should be - able to eject and substitute another disc. - - An adaptation of 0.33 is included in linux-1.3.7 by Eberhard Moenkeberg - - 18 jul 1995: 0.34 Patch by Heiko Eissfeldt included, mainly considering - verify_area's in the ioctls. Some bugs introduced by - EM considering the base port and irq fixed. - - 18 dec 1995: 0.35 Add some code for error checking... no luck... - - We jump to reach our goal: version 1.0 in the next stable linux kernel. - - 19 mar 1996: 0.95 Different implementation of CDROM_GET_UPC, on - request of Thomas Quinot. - 25 mar 1996: 0.96 Interpretation of opening with O_WRONLY or O_RDWR: - open only for ioctl operation, e.g., for operation of - tray etc. - 4 apr 1996: 0.97 First implementation of layer between VFS and cdrom - driver, a generic interface. Much of the functionality - of cm206_open() and cm206_ioctl() is transferred to a - new file cdrom.c and its header ucdrom.h. - - Upgrade to Linux kernel 1.3.78. - - 11 apr 1996 0.98 Upgrade to Linux kernel 1.3.85 - More code moved to cdrom.c - - 0.99 Some more small changes to decrease number - of oopses at module load; - - 27 jul 1996 0.100 Many hours of debugging, kernel change from 1.2.13 - to 2.0.7 seems to have introduced some weird behavior - in (interruptible_)sleep_on(&cd->data): the process - seems to be woken without any explicit wake_up in my own - code. Patch to try 100x in case such untriggered wake_up's - occur. - - 28 jul 1996 0.101 Rewriting of the code that receives the command echo, - using a fifo to store echoed bytes. - - Branch from 0.99: - - 0.99.1.0 Update to kernel release 2.0.10 dev_t -> kdev_t - (emoenke) various typos found by others. extra - module-load oops protection. - - 0.99.1.1 Initialization constant cdrom_dops.speed - changed from float (2.0) to int (2); Cli()-sti() pair - around cm260_reset() in module initialization code. - - 0.99.1.2 Changes literally as proposed by Scott Snyder - <snyder@d0sgif.fnal.gov> for the 2.1 kernel line, which - have to do mainly with the poor minor support i had. The - major new concept is to change a cdrom driver's - operations struct from the capabilities struct. This - reflects the fact that there is one major for a driver, - whilst there can be many minors whith completely - different capabilities. - - 0.99.1.3 More changes for operations/info separation. - - 0.99.1.4 Added speed selection (someone had to do this - first). - - 23 jan 1997 0.99.1.5 MODULE_PARMS call added. - - 23 jan 1997 0.100.1.2--0.100.1.5 following similar lines as - 0.99.1.1--0.99.1.5. I get too many complaints about the - drive making read errors. What't wrong with the 2.0+ - kernel line? Why get i (and othe cm206 owners) weird - results? Why were things good in the good old 1.1--1.2 - era? Why don't i throw away the drive? - - 2 feb 1997 0.102 Added `volatile' to values in cm206_struct. Seems to - reduce many of the problems. Rewrote polling routines - to use fixed delays between polls. - 0.103 Changed printk behavior. - 0.104 Added a 0.100 -> 0.100.1.1 change - -11 feb 1997 0.105 Allow auto_probe during module load, disable - with module option "auto_probe=0". Moved some debugging - statements to lower priority. Implemented select_speed() - function. - -13 feb 1997 1.0 Final version for 2.0 kernel line. - - All following changes will be for the 2.1 kernel line. - -15 feb 1997 1.1 Keep up with kernel 2.1.26, merge in changes from - cdrom.c 0.100.1.1--1.0. Add some more MODULE_PARMS. - -14 sep 1997 1.2 Upgrade to Linux 2.1.55. Added blksize_size[], patch - sent by James Bottomley <James.Bottomley@columbiasc.ncr.com>. - -21 dec 1997 1.4 Upgrade to Linux 2.1.72. - -24 jan 1998 Removed the cm206_disc_status() function, as it was now dead - code. The Uniform CDROM driver now provides this functionality. - -9 Nov. 1999 Make kernel-parameter implementation work with 2.3.x - Removed init_module & cleanup_module in favor of - module_init & module_exit. - Torben Mathiasen <tmm@image.dk> - * - * Parts of the code are based upon lmscd.c written by Kai Petzke, - * sbpcd.c written by Eberhard Moenkeberg, and mcd.c by Martin - * Harriss, but any off-the-shelf dynamic programming algorithm won't - * be able to find them. - * - * The cm206 drive interface and the cm260 adapter card seem to be - * sufficiently different from their cm205/cm250 counterparts - * in order to write a complete new driver. - * - * I call all routines connected to the Linux kernel something - * with `cm206' in it, as this stuff is too series-dependent. - * - * Currently, my limited knowledge is based on: - * - The Linux Kernel Hacker's guide, v. 0.5, by Michael K. Johnson - * - Linux Kernel Programmierung, by Michael Beck and others - * - Philips/LMS cm206 and cm226 product specification - * - Philips/LMS cm260 product specification - * - * David van Leeuwen, david@tm.tno.nl. */ -#define REVISION "$Revision: 1.5 $" - -#include <linux/module.h> - -#include <linux/errno.h> /* These include what we really need */ -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/interrupt.h> -#include <linux/timer.h> -#include <linux/cdrom.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/init.h> - -/* #include <linux/ucdrom.h> */ - -#include <asm/io.h> - -#define MAJOR_NR CM206_CDROM_MAJOR - -#include <linux/blkdev.h> - -#undef DEBUG -#define STATISTICS /* record times and frequencies of events */ -#define AUTO_PROBE_MODULE -#define USE_INSW - -#include "cm206.h" - -/* This variable defines whether or not to probe for adapter base port - address and interrupt request. It can be overridden by the boot - parameter `auto'. -*/ -static int auto_probe = 1; /* Yes, why not? */ - -static int cm206_base = CM206_BASE; -static int cm206_irq = CM206_IRQ; -#ifdef MODULE -static int cm206[2] = { 0, 0 }; /* for compatible `insmod' parameter passing */ -module_param_array(cm206, int, NULL, 0); /* base,irq or irq,base */ -#endif - -module_param(cm206_base, int, 0); /* base */ -module_param(cm206_irq, int, 0); /* irq */ -module_param(auto_probe, bool, 0); /* auto probe base and irq */ -MODULE_LICENSE("GPL"); - -#define POLLOOP 100 /* milliseconds */ -#define READ_AHEAD 1 /* defines private buffer, waste! */ -#define BACK_AHEAD 1 /* defines adapter-read ahead */ -#define DATA_TIMEOUT (3*HZ) /* measured in jiffies (10 ms) */ -#define UART_TIMEOUT (5*HZ/100) -#define DSB_TIMEOUT (7*HZ) /* time for the slowest command to finish */ -#define UR_SIZE 4 /* uart receive buffer fifo size */ - -#define LINUX_BLOCK_SIZE 512 /* WHERE is this defined? */ -#define RAW_SECTOR_SIZE 2352 /* ok, is also defined in cdrom.h */ -#define ISO_SECTOR_SIZE 2048 -#define BLOCKS_ISO (ISO_SECTOR_SIZE/LINUX_BLOCK_SIZE) /* 4 */ -#define CD_SYNC_HEAD 16 /* CD_SYNC + CD_HEAD */ - -#ifdef STATISTICS /* keep track of errors in counters */ -#define stats(i) { ++cd->stats[st_ ## i]; \ - cd->last_stat[st_ ## i] = cd->stat_counter++; \ - } -#else -#define stats(i) (void) 0; -#endif - -#define Debug(a) {printk (KERN_DEBUG); printk a;} -#ifdef DEBUG -#define debug(a) Debug(a) -#else -#define debug(a) (void) 0; -#endif - -typedef unsigned char uch; /* 8-bits */ -typedef unsigned short ush; /* 16-bits */ - -struct toc_struct { /* private copy of Table of Contents */ - uch track, fsm[3], q0; -}; - -struct cm206_struct { - volatile ush intr_ds; /* data status read on last interrupt */ - volatile ush intr_ls; /* uart line status read on last interrupt */ - volatile uch ur[UR_SIZE]; /* uart receive buffer fifo */ - volatile uch ur_w, ur_r; /* write/read buffer index */ - volatile uch dsb, cc; /* drive status byte and condition (error) code */ - int command; /* command to be written to the uart */ - int openfiles; - ush sector[READ_AHEAD * RAW_SECTOR_SIZE / 2]; /* buffered cd-sector */ - int sector_first, sector_last; /* range of these sectors */ - wait_queue_head_t uart; /* wait queues for interrupt */ - wait_queue_head_t data; - struct timer_list timer; /* time-out */ - char timed_out; - signed char max_sectors; /* number of sectors that fit in adapter mem */ - char wait_back; /* we're waiting for a background-read */ - char background; /* is a read going on in the background? */ - int adapter_first; /* if so, that's the starting sector */ - int adapter_last; - char fifo_overflowed; - uch disc_status[7]; /* result of get_disc_status command */ -#ifdef STATISTICS - int stats[NR_STATS]; - int last_stat[NR_STATS]; /* `time' at which stat was stat */ - int stat_counter; -#endif - struct toc_struct toc[101]; /* The whole table of contents + lead-out */ - uch q[10]; /* Last read q-channel info */ - uch audio_status[5]; /* last read position on pause */ - uch media_changed; /* record if media changed */ -}; - -#define DISC_STATUS cd->disc_status[0] -#define FIRST_TRACK cd->disc_status[1] -#define LAST_TRACK cd->disc_status[2] -#define PAUSED cd->audio_status[0] /* misuse this memory byte! */ -#define PLAY_TO cd->toc[0] /* toc[0] records end-time in play */ - -static struct cm206_struct *cd; /* the main memory structure */ -static struct request_queue *cm206_queue; -static DEFINE_SPINLOCK(cm206_lock); - -/* First, we define some polling functions. These are actually - only being used in the initialization. */ - -static void send_command_polled(int command) -{ - int loop = POLLOOP; - while (!(inw(r_line_status) & ls_transmitter_buffer_empty) - && loop > 0) { - mdelay(1); /* one millisec delay */ - --loop; - } - outw(command, r_uart_transmit); -} - -static uch receive_echo_polled(void) -{ - int loop = POLLOOP; - while (!(inw(r_line_status) & ls_receive_buffer_full) && loop > 0) { - mdelay(1); - --loop; - } - return ((uch) inw(r_uart_receive)); -} - -static uch send_receive_polled(int command) -{ - send_command_polled(command); - return receive_echo_polled(); -} - -static inline void clear_ur(void) -{ - if (cd->ur_r != cd->ur_w) { - debug(("Deleting bytes from fifo:")); - for (; cd->ur_r != cd->ur_w; - cd->ur_r++, cd->ur_r %= UR_SIZE) - debug((" 0x%x", cd->ur[cd->ur_r])); - debug(("\n")); - } -} - -static struct tasklet_struct cm206_tasklet; - -/* The interrupt handler. When the cm260 generates an interrupt, very - much care has to be taken in reading out the registers in the right - order; in case of a receive_buffer_full interrupt, first the - uart_receive must be read, and then the line status again to - de-assert the interrupt line. It took me a couple of hours to find - this out:-( - - The function reset_cm206 appears to cause an interrupt, because - pulling up the INIT line clears both the uart-write-buffer /and/ - the uart-write-buffer-empty mask. We call this a `lost interrupt,' - as there seems so reason for this to happen. -*/ - -static irqreturn_t cm206_interrupt(int sig, void *dev_id) -{ - volatile ush fool; - cd->intr_ds = inw(r_data_status); /* resets data_ready, data_error, - crc_error, sync_error, toc_ready - interrupts */ - cd->intr_ls = inw(r_line_status); /* resets overrun bit */ - debug(("Intr, 0x%x 0x%x, %d\n", cd->intr_ds, cd->intr_ls, - cd->background)); - if (cd->intr_ls & ls_attention) - stats(attention); - /* receive buffer full? */ - if (cd->intr_ls & ls_receive_buffer_full) { - cd->ur[cd->ur_w] = inb(r_uart_receive); /* get order right! */ - cd->intr_ls = inw(r_line_status); /* resets rbf interrupt */ - debug(("receiving #%d: 0x%x\n", cd->ur_w, - cd->ur[cd->ur_w])); - cd->ur_w++; - cd->ur_w %= UR_SIZE; - if (cd->ur_w == cd->ur_r) - debug(("cd->ur overflow!\n")); - if (waitqueue_active(&cd->uart) && cd->background < 2) { - del_timer(&cd->timer); - wake_up_interruptible(&cd->uart); - } - } - /* data ready in fifo? */ - else if (cd->intr_ds & ds_data_ready) { - if (cd->background) - ++cd->adapter_last; - if (waitqueue_active(&cd->data) - && (cd->wait_back || !cd->background)) { - del_timer(&cd->timer); - wake_up_interruptible(&cd->data); - } - stats(data_ready); - } - /* ready to issue a write command? */ - else if (cd->command && cd->intr_ls & ls_transmitter_buffer_empty) { - outw(dc_normal | (inw(r_data_status) & 0x7f), - r_data_control); - outw(cd->command, r_uart_transmit); - cd->command = 0; - if (!cd->background) - wake_up_interruptible(&cd->uart); - } - /* now treat errors (at least, identify them for debugging) */ - else if (cd->intr_ds & ds_fifo_overflow) { - debug(("Fifo overflow at sectors 0x%x\n", - cd->sector_first)); - fool = inw(r_fifo_output_buffer); /* de-assert the interrupt */ - cd->fifo_overflowed = 1; /* signal one word less should be read */ - stats(fifo_overflow); - } else if (cd->intr_ds & ds_data_error) { - debug(("Data error at sector 0x%x\n", cd->sector_first)); - stats(data_error); - } else if (cd->intr_ds & ds_crc_error) { - debug(("CRC error at sector 0x%x\n", cd->sector_first)); - stats(crc_error); - } else if (cd->intr_ds & ds_sync_error) { - debug(("Sync at sector 0x%x\n", cd->sector_first)); - stats(sync_error); - } else if (cd->intr_ds & ds_toc_ready) { - /* do something appropriate */ - } - /* couldn't see why this interrupt, maybe due to init */ - else { - outw(dc_normal | READ_AHEAD, r_data_control); - stats(lost_intr); - } - if (cd->background - && (cd->adapter_last - cd->adapter_first == cd->max_sectors - || cd->fifo_overflowed)) - tasklet_schedule(&cm206_tasklet); /* issue a stop read command */ - stats(interrupt); - return IRQ_HANDLED; -} - -/* we have put the address of the wait queue in who */ -static void cm206_timeout(unsigned long who) -{ - cd->timed_out = 1; - debug(("Timing out\n")); - wake_up_interruptible((wait_queue_head_t *) who); -} - -/* This function returns 1 if a timeout occurred, 0 if an interrupt - happened */ -static int sleep_or_timeout(wait_queue_head_t * wait, int timeout) -{ - cd->timed_out = 0; - init_timer(&cd->timer); - cd->timer.data = (unsigned long) wait; - cd->timer.expires = jiffies + timeout; - add_timer(&cd->timer); - debug(("going to sleep\n")); - interruptible_sleep_on(wait); - del_timer(&cd->timer); - if (cd->timed_out) { - cd->timed_out = 0; - return 1; - } else - return 0; -} - -static void send_command(int command) -{ - debug(("Sending 0x%x\n", command)); - if (!(inw(r_line_status) & ls_transmitter_buffer_empty)) { - cd->command = command; - cli(); /* don't interrupt before sleep */ - outw(dc_mask_sync_error | dc_no_stop_on_error | - (inw(r_data_status) & 0x7f), r_data_control); - /* interrupt routine sends command */ - if (sleep_or_timeout(&cd->uart, UART_TIMEOUT)) { - debug(("Time out on write-buffer\n")); - stats(write_timeout); - outw(command, r_uart_transmit); - } - debug(("Write commmand delayed\n")); - } else - outw(command, r_uart_transmit); -} - -static uch receive_byte(int timeout) -{ - uch ret; - cli(); - debug(("cli\n")); - ret = cd->ur[cd->ur_r]; - if (cd->ur_r != cd->ur_w) { - sti(); - debug(("returning #%d: 0x%x\n", cd->ur_r, - cd->ur[cd->ur_r])); - cd->ur_r++; - cd->ur_r %= UR_SIZE; - return ret; - } else if (sleep_or_timeout(&cd->uart, timeout)) { /* does sti() */ - debug(("Time out on receive-buffer\n")); -#ifdef STATISTICS - if (timeout == UART_TIMEOUT) - stats(receive_timeout) /* no `;'! */ - else - stats(dsb_timeout); -#endif - return 0xda; - } - ret = cd->ur[cd->ur_r]; - debug(("slept; returning #%d: 0x%x\n", cd->ur_r, - cd->ur[cd->ur_r])); - cd->ur_r++; - cd->ur_r %= UR_SIZE; - return ret; -} - -static inline uch receive_echo(void) -{ - return receive_byte(UART_TIMEOUT); -} - -static inline uch send_receive(int command) -{ - send_command(command); - return receive_echo(); -} - -static inline uch wait_dsb(void) -{ - return receive_byte(DSB_TIMEOUT); -} - -static int type_0_command(int command, int expect_dsb) -{ - int e; - clear_ur(); - if (command != (e = send_receive(command))) { - debug(("command 0x%x echoed as 0x%x\n", command, e)); - stats(echo); - return -1; - } - if (expect_dsb) { - cd->dsb = wait_dsb(); /* wait for command to finish */ - } - return 0; -} - -static int type_1_command(int command, int bytes, uch * status) -{ /* returns info */ - int i; - if (type_0_command(command, 0)) - return -1; - for (i = 0; i < bytes; i++) - status[i] = send_receive(c_gimme); - return 0; -} - -/* This function resets the adapter card. We'd better not do this too - * often, because it tends to generate `lost interrupts.' */ -static void reset_cm260(void) -{ - outw(dc_normal | dc_initialize | READ_AHEAD, r_data_control); - udelay(10); /* 3.3 mu sec minimum */ - outw(dc_normal | READ_AHEAD, r_data_control); -} - -/* fsm: frame-sec-min from linear address; one of many */ -static void fsm(int lba, uch * fsm) -{ - fsm[0] = lba % 75; - lba /= 75; - lba += 2; - fsm[1] = lba % 60; - fsm[2] = lba / 60; -} - -static inline int fsm2lba(uch * fsm) -{ - return fsm[0] + 75 * (fsm[1] - 2 + 60 * fsm[2]); -} - -static inline int f_s_m2lba(uch f, uch s, uch m) -{ - return f + 75 * (s - 2 + 60 * m); -} - -static int start_read(int start) -{ - uch read_sector[4] = { c_read_data, }; - int i, e; - - fsm(start, &read_sector[1]); - clear_ur(); - for (i = 0; i < 4; i++) - if (read_sector[i] != (e = send_receive(read_sector[i]))) { - debug(("read_sector: %x echoes %x\n", - read_sector[i], e)); - stats(echo); - if (e == 0xff) { /* this seems to happen often */ - e = receive_echo(); - debug(("Second try %x\n", e)); - if (e != read_sector[i]) - return -1; - } - } - return 0; -} - -static int stop_read(void) -{ - int e; - type_0_command(c_stop, 0); - if ((e = receive_echo()) != 0xff) { - debug(("c_stop didn't send 0xff, but 0x%x\n", e)); - stats(stop_0xff); - return -1; - } - return 0; -} - -/* This function starts to read sectors in adapter memory, the - interrupt routine should stop the read. In fact, the bottom_half - routine takes care of this. Set a flag `background' in the cd - struct to indicate the process. */ - -static int read_background(int start, int reading) -{ - if (cd->background) - return -1; /* can't do twice */ - outw(dc_normal | BACK_AHEAD, r_data_control); - if (!reading && start_read(start)) - return -2; - cd->adapter_first = cd->adapter_last = start; - cd->background = 1; /* flag a read is going on */ - return 0; -} - -#ifdef USE_INSW -#define transport_data insw -#else -/* this routine implements insw(,,). There was a time i had the - impression that there would be any difference in error-behaviour. */ -void transport_data(int port, ush * dest, int count) -{ - int i; - ush *d; - for (i = 0, d = dest; i < count; i++, d++) - *d = inw(port); -} -#endif - - -#define MAX_TRIES 100 -static int read_sector(int start) -{ - int tries = 0; - if (cd->background) { - cd->background = 0; - cd->adapter_last = -1; /* invalidate adapter memory */ - stop_read(); - } - cd->fifo_overflowed = 0; - reset_cm260(); /* empty fifo etc. */ - if (start_read(start)) - return -1; - do { - if (sleep_or_timeout(&cd->data, DATA_TIMEOUT)) { - debug(("Read timed out sector 0x%x\n", start)); - stats(read_timeout); - stop_read(); - return -3; - } - tries++; - } while (cd->intr_ds & ds_fifo_empty && tries < MAX_TRIES); - if (tries > 1) - debug(("Took me some tries\n")) - else - if (tries == MAX_TRIES) - debug(("MAX_TRIES tries for read sector\n")); - transport_data(r_fifo_output_buffer, cd->sector, - READ_AHEAD * RAW_SECTOR_SIZE / 2); - if (read_background(start + READ_AHEAD, 1)) - stats(read_background); - cd->sector_first = start; - cd->sector_last = start + READ_AHEAD; - stats(read_restarted); - return 0; -} - -/* The function of bottom-half is to send a stop command to the drive - This isn't easy because the routine is not `owned' by any process; - we can't go to sleep! The variable cd->background gives the status: - 0 no read pending - 1 a read is pending - 2 c_stop waits for write_buffer_empty - 3 c_stop waits for receive_buffer_full: echo - 4 c_stop waits for receive_buffer_full: 0xff -*/ - -static void cm206_tasklet_func(unsigned long ignore) -{ - debug(("bh: %d\n", cd->background)); - switch (cd->background) { - case 1: - stats(bh); - if (!(cd->intr_ls & ls_transmitter_buffer_empty)) { - cd->command = c_stop; - outw(dc_mask_sync_error | dc_no_stop_on_error | - (inw(r_data_status) & 0x7f), r_data_control); - cd->background = 2; - break; /* we'd better not time-out here! */ - } else - outw(c_stop, r_uart_transmit); - /* fall into case 2: */ - case 2: - /* the write has been satisfied by interrupt routine */ - cd->background = 3; - break; - case 3: - if (cd->ur_r != cd->ur_w) { - if (cd->ur[cd->ur_r] != c_stop) { - debug(("cm206_bh: c_stop echoed 0x%x\n", - cd->ur[cd->ur_r])); - stats(echo); - } - cd->ur_r++; - cd->ur_r %= UR_SIZE; - } - cd->background++; - break; - case 4: - if (cd->ur_r != cd->ur_w) { - if (cd->ur[cd->ur_r] != 0xff) { - debug(("cm206_bh: c_stop reacted with 0x%x\n", cd->ur[cd->ur_r])); - stats(stop_0xff); - } - cd->ur_r++; - cd->ur_r %= UR_SIZE; - } - cd->background = 0; - } -} - -static DECLARE_TASKLET(cm206_tasklet, cm206_tasklet_func, 0); - -/* This command clears the dsb_possible_media_change flag, so we must - * retain it. - */ -static void get_drive_status(void) -{ - uch status[2]; - type_1_command(c_drive_status, 2, status); /* this might be done faster */ - cd->dsb = status[0]; - cd->cc = status[1]; - cd->media_changed |= - !!(cd->dsb & (dsb_possible_media_change | - dsb_drive_not_ready | dsb_tray_not_closed)); -} - -static void get_disc_status(void) -{ - if (type_1_command(c_disc_status, 7, cd->disc_status)) { - debug(("get_disc_status: error\n")); - } -} - -/* The new open. The real opening strategy is defined in cdrom.c. */ - -static int cm206_open(struct cdrom_device_info *cdi, int purpose) -{ - if (!cd->openfiles) { /* reset only first time */ - cd->background = 0; - reset_cm260(); - cd->adapter_last = -1; /* invalidate adapter memory */ - cd->sector_last = -1; - } - ++cd->openfiles; - stats(open); - return 0; -} - -static void cm206_release(struct cdrom_device_info *cdi) -{ - if (cd->openfiles == 1) { - if (cd->background) { - cd->background = 0; - stop_read(); - } - cd->sector_last = -1; /* Make our internal buffer invalid */ - FIRST_TRACK = 0; /* No valid disc status */ - } - --cd->openfiles; -} - -/* Empty buffer empties $sectors$ sectors of the adapter card buffer, - * and then reads a sector in kernel memory. */ -static void empty_buffer(int sectors) -{ - while (sectors >= 0) { - transport_data(r_fifo_output_buffer, - cd->sector + cd->fifo_overflowed, - RAW_SECTOR_SIZE / 2 - cd->fifo_overflowed); - --sectors; - ++cd->adapter_first; /* update the current adapter sector */ - cd->fifo_overflowed = 0; /* reset overflow bit */ - stats(sector_transferred); - } - cd->sector_first = cd->adapter_first - 1; - cd->sector_last = cd->adapter_first; /* update the buffer sector */ -} - -/* try_adapter. This function determines if the requested sector is - in adapter memory, or will appear there soon. Returns 0 upon - success */ -static int try_adapter(int sector) -{ - if (cd->adapter_first <= sector && sector < cd->adapter_last) { - /* sector is in adapter memory */ - empty_buffer(sector - cd->adapter_first); - return 0; - } else if (cd->background == 1 && cd->adapter_first <= sector - && sector < cd->adapter_first + cd->max_sectors) { - /* a read is going on, we can wait for it */ - cd->wait_back = 1; - while (sector >= cd->adapter_last) { - if (sleep_or_timeout(&cd->data, DATA_TIMEOUT)) { - debug(("Timed out during background wait: %d %d %d %d\n", sector, cd->adapter_last, cd->adapter_first, cd->background)); - stats(back_read_timeout); - cd->wait_back = 0; - return -1; - } - } - cd->wait_back = 0; - empty_buffer(sector - cd->adapter_first); - return 0; - } else - return -2; -} - -/* This is not a very smart implementation. We could optimize for - consecutive block numbers. I'm not convinced this would really - bring down the processor load. */ -static void do_cm206_request(request_queue_t * q) -{ - long int i, cd_sec_no; - int quarter, error; - uch *source, *dest; - struct request *req; - - while (1) { /* repeat until all requests have been satisfied */ - req = elv_next_request(q); - if (!req) - return; - - if (req->cmd != READ) { - debug(("Non-read command %d on cdrom\n", req->cmd)); - end_request(req, 0); - continue; - } - spin_unlock_irq(q->queue_lock); - error = 0; - for (i = 0; i < req->nr_sectors; i++) { - int e1, e2; - cd_sec_no = (req->sector + i) / BLOCKS_ISO; /* 4 times 512 bytes */ - quarter = (req->sector + i) % BLOCKS_ISO; - dest = req->buffer + i * LINUX_BLOCK_SIZE; - /* is already in buffer memory? */ - if (cd->sector_first <= cd_sec_no - && cd_sec_no < cd->sector_last) { - source = - ((uch *) cd->sector) + 16 + - quarter * LINUX_BLOCK_SIZE + - (cd_sec_no - - cd->sector_first) * RAW_SECTOR_SIZE; - memcpy(dest, source, LINUX_BLOCK_SIZE); - } else if (!(e1 = try_adapter(cd_sec_no)) || - !(e2 = read_sector(cd_sec_no))) { - source = - ((uch *) cd->sector) + 16 + - quarter * LINUX_BLOCK_SIZE; - memcpy(dest, source, LINUX_BLOCK_SIZE); - } else { - error = 1; - debug(("cm206_request: %d %d\n", e1, e2)); - } - } - spin_lock_irq(q->queue_lock); - end_request(req, !error); - } -} - -/* Audio support. I've tried very hard, but the cm206 drive doesn't - seem to have a get_toc (table-of-contents) function, while i'm - pretty sure it must read the toc upon disc insertion. Therefore - this function has been implemented through a binary search - strategy. All track starts that happen to be found are stored in - cd->toc[], for future use. - - I've spent a whole day on a bug that only shows under Workman--- - I don't get it. Tried everything, nothing works. If workman asks - for track# 0xaa, it'll get the wrong time back. Any other program - receives the correct value. I'm stymied. -*/ - -/* seek seeks to address lba. It does wait to arrive there. */ -static void seek(int lba) -{ - int i; - uch seek_command[4] = { c_seek, }; - - fsm(lba, &seek_command[1]); - for (i = 0; i < 4; i++) - type_0_command(seek_command[i], 0); - cd->dsb = wait_dsb(); -} - -static uch bcdbin(unsigned char bcd) -{ /* stolen from mcd.c! */ - return (bcd >> 4) * 10 + (bcd & 0xf); -} - -static inline uch normalize_track(uch track) -{ - if (track < 1) - return 1; - if (track > LAST_TRACK) - return LAST_TRACK + 1; - return track; -} - -/* This function does a binary search for track start. It records all - * tracks seen in the process. Input $track$ must be between 1 and - * #-of-tracks+1. Note that the start of the disc must be in toc[1].fsm. - */ -static int get_toc_lba(uch track) -{ - int max = 74 * 60 * 75 - 150, min = fsm2lba(cd->toc[1].fsm); - int i, lba, l, old_lba = 0; - uch *q = cd->q; - uch ct; /* current track */ - int binary = 0; - const int skip = 3 * 60 * 75; /* 3 minutes */ - - for (i = track; i > 0; i--) - if (cd->toc[i].track) { - min = fsm2lba(cd->toc[i].fsm); - break; - } - lba = min + skip; - do { - seek(lba); - type_1_command(c_read_current_q, 10, q); - ct = normalize_track(q[1]); - if (!cd->toc[ct].track) { - l = q[9] - bcdbin(q[5]) + 75 * (q[8] - - bcdbin(q[4]) - 2 + - 60 * (q[7] - - bcdbin(q - [3]))); - cd->toc[ct].track = q[1]; /* lead out still 0xaa */ - fsm(l, cd->toc[ct].fsm); - cd->toc[ct].q0 = q[0]; /* contains adr and ctrl info */ - if (ct == track) - return l; - } - old_lba = lba; - if (binary) { - if (ct < track) - min = lba; - else - max = lba; - lba = (min + max) / 2; - } else { - if (ct < track) - lba += skip; - else { - binary = 1; - max = lba; - min = lba - skip; - lba = (min + max) / 2; - } - } - } while (lba != old_lba); - return lba; -} - -static void update_toc_entry(uch track) -{ - track = normalize_track(track); - if (!cd->toc[track].track) - get_toc_lba(track); -} - -/* return 0 upon success */ -static int read_toc_header(struct cdrom_tochdr *hp) -{ - if (!FIRST_TRACK) - get_disc_status(); - if (hp) { - int i; - hp->cdth_trk0 = FIRST_TRACK; - hp->cdth_trk1 = LAST_TRACK; - /* fill in first track position */ - for (i = 0; i < 3; i++) - cd->toc[1].fsm[i] = cd->disc_status[3 + i]; - update_toc_entry(LAST_TRACK + 1); /* find most entries */ - return 0; - } - return -1; -} - -static void play_from_to_msf(struct cdrom_msf *msfp) -{ - uch play_command[] = { c_play, - msfp->cdmsf_frame0, msfp->cdmsf_sec0, msfp->cdmsf_min0, - msfp->cdmsf_frame1, msfp->cdmsf_sec1, msfp->cdmsf_min1, 2, - 2 - }; - int i; - for (i = 0; i < 9; i++) - type_0_command(play_command[i], 0); - for (i = 0; i < 3; i++) - PLAY_TO.fsm[i] = play_command[i + 4]; - PLAY_TO.track = 0; /* say no track end */ - cd->dsb = wait_dsb(); -} - -static void play_from_to_track(int from, int to) -{ - uch play_command[8] = { c_play, }; - int i; - - if (from == 0) { /* continue paused play */ - for (i = 0; i < 3; i++) { - play_command[i + 1] = cd->audio_status[i + 2]; - play_command[i + 4] = PLAY_TO.fsm[i]; - } - } else { - update_toc_entry(from); - update_toc_entry(to + 1); - for (i = 0; i < 3; i++) { - play_command[i + 1] = cd->toc[from].fsm[i]; - PLAY_TO.fsm[i] = play_command[i + 4] = - cd->toc[to + 1].fsm[i]; - } - PLAY_TO.track = to; - } - for (i = 0; i < 7; i++) - type_0_command(play_command[i], 0); - for (i = 0; i < 2; i++) - type_0_command(0x2, 0); /* volume */ - cd->dsb = wait_dsb(); -} - -static int get_current_q(struct cdrom_subchnl *qp) -{ - int i; - uch *q = cd->q; - if (type_1_command(c_read_current_q, 10, q)) - return 0; -/* q[0] = bcdbin(q[0]); Don't think so! */ - for (i = 2; i < 6; i++) - q[i] = bcdbin(q[i]); - qp->cdsc_adr = q[0] & 0xf; - qp->cdsc_ctrl = q[0] >> 4; /* from mcd.c */ - qp->cdsc_trk = q[1]; - qp->cdsc_ind = q[2]; - if (qp->cdsc_format == CDROM_MSF) { - qp->cdsc_reladdr.msf.minute = q[3]; - qp->cdsc_reladdr.msf.second = q[4]; - qp->cdsc_reladdr.msf.frame = q[5]; - qp->cdsc_absaddr.msf.minute = q[7]; - qp->cdsc_absaddr.msf.second = q[8]; - qp->cdsc_absaddr.msf.frame = q[9]; - } else { - qp->cdsc_reladdr.lba = f_s_m2lba(q[5], q[4], q[3]); - qp->cdsc_absaddr.lba = f_s_m2lba(q[9], q[8], q[7]); - } - get_drive_status(); - if (cd->dsb & dsb_play_in_progress) - qp->cdsc_audiostatus = CDROM_AUDIO_PLAY; - else if (PAUSED) - qp->cdsc_audiostatus = CDROM_AUDIO_PAUSED; - else - qp->cdsc_audiostatus = CDROM_AUDIO_NO_STATUS; - return 0; -} - -static void invalidate_toc(void) -{ - memset(cd->toc, 0, sizeof(cd->toc)); - memset(cd->disc_status, 0, sizeof(cd->disc_status)); -} - -/* cdrom.c guarantees that cdte_format == CDROM_MSF */ -static void get_toc_entry(struct cdrom_tocentry *ep) -{ - uch track = normalize_track(ep->cdte_track); - update_toc_entry(track); - ep->cdte_addr.msf.frame = cd->toc[track].fsm[0]; - ep->cdte_addr.msf.second = cd->toc[track].fsm[1]; - ep->cdte_addr.msf.minute = cd->toc[track].fsm[2]; - ep->cdte_adr = cd->toc[track].q0 & 0xf; - ep->cdte_ctrl = cd->toc[track].q0 >> 4; - ep->cdte_datamode = 0; -} - -/* Audio ioctl. Ioctl commands connected to audio are in such an - * idiosyncratic i/o format, that we leave these untouched. Return 0 - * upon success. Memory checking has been done by cdrom_ioctl(), the - * calling function, as well as LBA/MSF sanitization. -*/ -static int cm206_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd, - void *arg) -{ - switch (cmd) { - case CDROMREADTOCHDR: - return read_toc_header((struct cdrom_tochdr *) arg); - case CDROMREADTOCENTRY: - get_toc_entry((struct cdrom_tocentry *) arg); - return 0; - case CDROMPLAYMSF: - play_from_to_msf((struct cdrom_msf *) arg); - return 0; - case CDROMPLAYTRKIND: /* admittedly, not particularly beautiful */ - play_from_to_track(((struct cdrom_ti *) arg)->cdti_trk0, - ((struct cdrom_ti *) arg)->cdti_trk1); - return 0; - case CDROMSTOP: - PAUSED = 0; - if (cd->dsb & dsb_play_in_progress) - return type_0_command(c_stop, 1); - else - return 0; - case CDROMPAUSE: - get_drive_status(); - if (cd->dsb & dsb_play_in_progress) { - type_0_command(c_stop, 1); - type_1_command(c_audio_status, 5, - cd->audio_status); - PAUSED = 1; /* say we're paused */ - } - return 0; - case CDROMRESUME: - if (PAUSED) - play_from_to_track(0, 0); - PAUSED = 0; - return 0; - case CDROMSTART: - case CDROMVOLCTRL: - return 0; - case CDROMSUBCHNL: - return get_current_q((struct cdrom_subchnl *) arg); - default: - return -EINVAL; - } -} - -static int cm206_media_changed(struct cdrom_device_info *cdi, int disc_nr) -{ - if (cd != NULL) { - int r; - get_drive_status(); /* ensure cd->media_changed OK */ - r = cd->media_changed; - cd->media_changed = 0; /* clear bit */ - return r; - } else - return -EIO; -} - -/* The new generic cdrom support. Routines should be concise, most of - the logic should be in cdrom.c */ - - -/* controls tray movement */ -static int cm206_tray_move(struct cdrom_device_info *cdi, int position) -{ - if (position) { /* 1: eject */ - type_0_command(c_open_tray, 1); - invalidate_toc(); - } else - type_0_command(c_close_tray, 1); /* 0: close */ - return 0; -} - -/* gives current state of the drive */ -static int cm206_drive_status(struct cdrom_device_info *cdi, int slot_nr) -{ - get_drive_status(); - if (cd->dsb & dsb_tray_not_closed) - return CDS_TRAY_OPEN; - if (!(cd->dsb & dsb_disc_present)) - return CDS_NO_DISC; - if (cd->dsb & dsb_drive_not_ready) - return CDS_DRIVE_NOT_READY; - return CDS_DISC_OK; -} - -/* locks or unlocks door lock==1: lock; return 0 upon success */ -static int cm206_lock_door(struct cdrom_device_info *cdi, int lock) -{ - uch command = (lock) ? c_lock_tray : c_unlock_tray; - type_0_command(command, 1); /* wait and get dsb */ - /* the logic calculates the success, 0 means successful */ - return lock ^ ((cd->dsb & dsb_tray_locked) != 0); -} - -/* Although a session start should be in LBA format, we return it in - MSF format because it is slightly easier, and the new generic ioctl - will take care of the necessary conversion. */ -static int cm206_get_last_session(struct cdrom_device_info *cdi, - struct cdrom_multisession *mssp) -{ - if (!FIRST_TRACK) - get_disc_status(); - if (mssp != NULL) { - if (DISC_STATUS & cds_multi_session) { /* multi-session */ - mssp->addr.msf.frame = cd->disc_status[3]; - mssp->addr.msf.second = cd->disc_status[4]; - mssp->addr.msf.minute = cd->disc_status[5]; - mssp->addr_format = CDROM_MSF; - mssp->xa_flag = 1; - } else { - mssp->xa_flag = 0; - } - return 1; - } - return 0; -} - -static int cm206_get_upc(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn) -{ - uch upc[10]; - char *ret = mcn->medium_catalog_number; - int i; - - if (type_1_command(c_read_upc, 10, upc)) - return -EIO; - for (i = 0; i < 13; i++) { - int w = i / 2 + 1, r = i % 2; - if (r) - ret[i] = 0x30 | (upc[w] & 0x0f); - else - ret[i] = 0x30 | ((upc[w] >> 4) & 0x0f); - } - ret[13] = '\0'; - return 0; -} - -static int cm206_reset(struct cdrom_device_info *cdi) -{ - stop_read(); - reset_cm260(); - outw(dc_normal | dc_break | READ_AHEAD, r_data_control); - mdelay(1); /* 750 musec minimum */ - outw(dc_normal | READ_AHEAD, r_data_control); - cd->sector_last = -1; /* flag no data buffered */ - cd->adapter_last = -1; - invalidate_toc(); - return 0; -} - -static int cm206_select_speed(struct cdrom_device_info *cdi, int speed) -{ - int r; - switch (speed) { - case 0: - r = type_0_command(c_auto_mode, 1); - break; - case 1: - r = type_0_command(c_force_1x, 1); - break; - case 2: - r = type_0_command(c_force_2x, 1); - break; - default: - return -1; - } - if (r < 0) - return r; - else - return 1; -} - -static struct cdrom_device_ops cm206_dops = { - .open = cm206_open, - .release = cm206_release, - .drive_status = cm206_drive_status, - .media_changed = cm206_media_changed, - .tray_move = cm206_tray_move, - .lock_door = cm206_lock_door, - .select_speed = cm206_select_speed, - .get_last_session = cm206_get_last_session, - .get_mcn = cm206_get_upc, - .reset = cm206_reset, - .audio_ioctl = cm206_audio_ioctl, - .capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | - CDC_MULTI_SESSION | CDC_MEDIA_CHANGED | - CDC_MCN | CDC_PLAY_AUDIO | CDC_SELECT_SPEED | - CDC_DRIVE_STATUS, - .n_minors = 1, -}; - - -static struct cdrom_device_info cm206_info = { - .ops = &cm206_dops, - .speed = 2, - .capacity = 1, - .name = "cm206", -}; - -static int cm206_block_open(struct inode *inode, struct file *file) -{ - return cdrom_open(&cm206_info, inode, file); -} - -static int cm206_block_release(struct inode *inode, struct file *file) -{ - return cdrom_release(&cm206_info, file); -} - -static int cm206_block_ioctl(struct inode *inode, struct file *file, - unsigned cmd, unsigned long arg) -{ - switch (cmd) { -#ifdef STATISTICS - case CM206CTL_GET_STAT: - if (arg >= NR_STATS) - return -EINVAL; - return cd->stats[arg]; - case CM206CTL_GET_LAST_STAT: - if (arg >= NR_STATS) - return -EINVAL; - return cd->last_stat[arg]; -#endif - default: - break; - } - - return cdrom_ioctl(file, &cm206_info, inode, cmd, arg); -} - -static int cm206_block_media_changed(struct gendisk *disk) -{ - return cdrom_media_changed(&cm206_info); -} - -static struct block_device_operations cm206_bdops = -{ - .owner = THIS_MODULE, - .open = cm206_block_open, - .release = cm206_block_release, - .ioctl = cm206_block_ioctl, - .media_changed = cm206_block_media_changed, -}; - -static struct gendisk *cm206_gendisk; - -/* This function probes for the adapter card. It returns the base - address if it has found the adapter card. One can specify a base - port to probe specifically, or 0 which means span all possible - bases. - - Linus says it is too dangerous to use writes for probing, so we - stick with pure reads for a while. Hope that 8 possible ranges, - request_region, 15 bits of one port and 6 of another make things - likely enough to accept the region on the first hit... - */ -static int __init probe_base_port(int base) -{ - int b = 0x300, e = 0x370; /* this is the range of start addresses */ - volatile int fool, i; - - if (base) - b = e = base; - for (base = b; base <= e; base += 0x10) { - if (!request_region(base, 0x10,"cm206")) - continue; - for (i = 0; i < 3; i++) - fool = inw(base + 2); /* empty possibly uart_receive_buffer */ - if ((inw(base + 6) & 0xffef) != 0x0001 || /* line_status */ - (inw(base) & 0xad00) != 0) { /* data status */ - release_region(base,0x10); - continue; - } - return (base); - } - return 0; -} - -#if !defined(MODULE) || defined(AUTO_PROBE_MODULE) -/* Probe for irq# nr. If nr==0, probe for all possible irq's. */ -static int __init probe_irq(int nr) -{ - int irqs, irq; - outw(dc_normal | READ_AHEAD, r_data_control); /* disable irq-generation */ - sti(); - irqs = probe_irq_on(); - reset_cm260(); /* causes interrupt */ - udelay(100); /* wait for it */ - irq = probe_irq_off(irqs); - outw(dc_normal | READ_AHEAD, r_data_control); /* services interrupt */ - if (nr && irq != nr && irq > 0) - return 0; /* wrong interrupt happened */ - else - return irq; -} -#endif - -int __init cm206_init(void) -{ - uch e = 0; - long int size = sizeof(struct cm206_struct); - struct gendisk *disk; - - printk(KERN_INFO "cm206 cdrom driver " REVISION); - cm206_base = probe_base_port(auto_probe ? 0 : cm206_base); - if (!cm206_base) { - printk(" can't find adapter!\n"); - return -EIO; - } - printk(" adapter at 0x%x", cm206_base); - cd = kmalloc(size, GFP_KERNEL); - if (!cd) - goto out_base; - /* Now we have found the adaptor card, try to reset it. As we have - * found out earlier, this process generates an interrupt as well, - * so we might just exploit that fact for irq probing! */ -#if !defined(MODULE) || defined(AUTO_PROBE_MODULE) - cm206_irq = probe_irq(auto_probe ? 0 : cm206_irq); - if (cm206_irq <= 0) { - printk("can't find IRQ!\n"); - goto out_probe; - } else - printk(" IRQ %d found\n", cm206_irq); -#else - cli(); - reset_cm260(); - /* Now, the problem here is that reset_cm260 can generate an - interrupt. It seems that this can cause a kernel oops some time - later. So we wait a while and `service' this interrupt. */ - mdelay(1); - outw(dc_normal | READ_AHEAD, r_data_control); - sti(); - printk(" using IRQ %d\n", cm206_irq); -#endif - if (send_receive_polled(c_drive_configuration) != - c_drive_configuration) { - printk(KERN_INFO " drive not there\n"); - goto out_probe; - } - e = send_receive_polled(c_gimme); - printk(KERN_INFO "Firmware revision %d", e & dcf_revision_code); - if (e & dcf_transfer_rate) - printk(" double"); - else - printk(" single"); - printk(" speed drive"); - if (e & dcf_motorized_tray) - printk(", motorized tray"); - if (request_irq(cm206_irq, cm206_interrupt, 0, "cm206", NULL)) { - printk("\nUnable to reserve IRQ---aborted\n"); - goto out_probe; - } - printk(".\n"); - - if (register_blkdev(MAJOR_NR, "cm206")) - goto out_blkdev; - - disk = alloc_disk(1); - if (!disk) - goto out_disk; - disk->major = MAJOR_NR; - disk->first_minor = 0; - sprintf(disk->disk_name, "cm206cd"); - disk->fops = &cm206_bdops; - disk->flags = GENHD_FL_CD; - cm206_gendisk = disk; - if (register_cdrom(&cm206_info) != 0) { - printk(KERN_INFO "Cannot register for cdrom %d!\n", MAJOR_NR); - goto out_cdrom; - } - cm206_queue = blk_init_queue(do_cm206_request, &cm206_lock); - if (!cm206_queue) - goto out_queue; - - blk_queue_hardsect_size(cm206_queue, 2048); - disk->queue = cm206_queue; - add_disk(disk); - - memset(cd, 0, sizeof(*cd)); /* give'm some reasonable value */ - cd->sector_last = -1; /* flag no data buffered */ - cd->adapter_last = -1; - init_timer(&cd->timer); - cd->timer.function = cm206_timeout; - cd->max_sectors = (inw(r_data_status) & ds_ram_size) ? 24 : 97; - printk(KERN_INFO "%d kB adapter memory available, " - " %ld bytes kernel memory used.\n", cd->max_sectors * 2, - size); - return 0; - -out_queue: - unregister_cdrom(&cm206_info); -out_cdrom: - put_disk(disk); -out_disk: - unregister_blkdev(MAJOR_NR, "cm206"); -out_blkdev: - free_irq(cm206_irq, NULL); -out_probe: - kfree(cd); -out_base: - release_region(cm206_base, 16); - return -EIO; -} - -#ifdef MODULE - - -static void __init parse_options(void) -{ - int i; - for (i = 0; i < 2; i++) { - if (0x300 <= cm206[i] && i <= 0x370 - && cm206[i] % 0x10 == 0) { - cm206_base = cm206[i]; - auto_probe = 0; - } else if (3 <= cm206[i] && cm206[i] <= 15) { - cm206_irq = cm206[i]; - auto_probe = 0; - } - } -} - -static int __init __cm206_init(void) -{ - parse_options(); -#if !defined(AUTO_PROBE_MODULE) - auto_probe = 0; -#endif - return cm206_init(); -} - -static void __exit cm206_exit(void) -{ - del_gendisk(cm206_gendisk); - put_disk(cm206_gendisk); - if (unregister_cdrom(&cm206_info)) { - printk("Can't unregister cdrom cm206\n"); - return; - } - if (unregister_blkdev(MAJOR_NR, "cm206")) { - printk("Can't unregister major cm206\n"); - return; - } - blk_cleanup_queue(cm206_queue); - free_irq(cm206_irq, NULL); - kfree(cd); - release_region(cm206_base, 16); - printk(KERN_INFO "cm206 removed\n"); -} - -module_init(__cm206_init); -module_exit(cm206_exit); - -#else /* !MODULE */ - -/* This setup function accepts either `auto' or numbers in the range - * 3--11 (for irq) or 0x300--0x370 (for base port) or both. */ - -static int __init cm206_setup(char *s) -{ - int i, p[4]; - - (void) get_options(s, ARRAY_SIZE(p), p); - - if (!strcmp(s, "auto")) - auto_probe = 1; - for (i = 1; i <= p[0]; i++) { - if (0x300 <= p[i] && i <= 0x370 && p[i] % 0x10 == 0) { - cm206_base = p[i]; - auto_probe = 0; - } else if (3 <= p[i] && p[i] <= 15) { - cm206_irq = p[i]; - auto_probe = 0; - } - } - return 1; -} - -__setup("cm206=", cm206_setup); - -#endif /* !MODULE */ -MODULE_ALIAS_BLOCKDEV_MAJOR(CM206_CDROM_MAJOR); - diff --git a/drivers/cdrom/cm206.h b/drivers/cdrom/cm206.h deleted file mode 100644 index 0ae51c1a0da..00000000000 --- a/drivers/cdrom/cm206.h +++ /dev/null @@ -1,171 +0,0 @@ -/* cm206.h Header file for cm206.c. - Copyright (c) 1995 David van Leeuwen -*/ - -#ifndef LINUX_CM206_H -#define LINUX_CM206_H - -#include <linux/ioctl.h> - -/* First, the cm260 stuff */ -/* The ports and irq used. Although CM206_BASE and CM206_IRQ are defined - below, the values are not used unless autoprobing is turned off and - no LILO boot options or module command line options are given. Change - these values to your own as last resort if autoprobing and options - don't work. */ - -#define CM206_BASE 0x340 -#define CM206_IRQ 11 - -#define r_data_status (cm206_base) -#define r_uart_receive (cm206_base+0x2) -#define r_fifo_output_buffer (cm206_base+0x4) -#define r_line_status (cm206_base+0x6) -#define r_data_control (cm206_base+0x8) -#define r_uart_transmit (cm206_base+0xa) -#define r_test_clock (cm206_base+0xc) -#define r_test_control (cm206_base+0xe) - -/* the data_status flags */ -#define ds_ram_size 0x4000 -#define ds_toc_ready 0x2000 -#define ds_fifo_empty 0x1000 -#define ds_sync_error 0x800 -#define ds_crc_error 0x400 -#define ds_data_error 0x200 -#define ds_fifo_overflow 0x100 -#define ds_data_ready 0x80 - -/* the line_status flags */ -#define ls_attention 0x10 -#define ls_parity_error 0x8 -#define ls_overrun 0x4 -#define ls_receive_buffer_full 0x2 -#define ls_transmitter_buffer_empty 0x1 - -/* the data control register flags */ -#define dc_read_q_channel 0x4000 -#define dc_mask_sync_error 0x2000 -#define dc_toc_enable 0x1000 -#define dc_no_stop_on_error 0x800 -#define dc_break 0x400 -#define dc_initialize 0x200 -#define dc_mask_transmit_ready 0x100 -#define dc_flag_enable 0x80 - -/* Define the default data control register flags here */ -#define dc_normal (dc_mask_sync_error | dc_no_stop_on_error | \ - dc_mask_transmit_ready) - -/* now some constants related to the cm206 */ -/* another drive status byte, echoed by the cm206 on most commands */ - -#define dsb_error_condition 0x1 -#define dsb_play_in_progress 0x4 -#define dsb_possible_media_change 0x8 -#define dsb_disc_present 0x10 -#define dsb_drive_not_ready 0x20 -#define dsb_tray_locked 0x40 -#define dsb_tray_not_closed 0x80 - -#define dsb_not_useful (dsb_drive_not_ready | dsb_tray_not_closed) - -/* the cm206 command set */ - -#define c_close_tray 0 -#define c_lock_tray 0x01 -#define c_unlock_tray 0x04 -#define c_open_tray 0x05 -#define c_seek 0x10 -#define c_read_data 0x20 -#define c_force_1x 0x21 -#define c_force_2x 0x22 -#define c_auto_mode 0x23 -#define c_play 0x30 -#define c_set_audio_mode 0x31 -#define c_read_current_q 0x41 -#define c_stream_q 0x42 -#define c_drive_status 0x50 -#define c_disc_status 0x51 -#define c_audio_status 0x52 -#define c_drive_configuration 0x53 -#define c_read_upc 0x60 -#define c_stop 0x70 -#define c_calc_checksum 0xe5 - -#define c_gimme 0xf8 - -/* finally, the (error) condition that the drive can be in * - * OK, this is not always an error, but let's prefix it with e_ */ - -#define e_none 0 -#define e_illegal_command 0x01 -#define e_sync 0x02 -#define e_seek 0x03 -#define e_parity 0x04 -#define e_focus 0x05 -#define e_header_sync 0x06 -#define e_code_incompatibility 0x07 -#define e_reset_done 0x08 -#define e_bad_parameter 0x09 -#define e_radial 0x0a -#define e_sub_code 0x0b -#define e_no_data_track 0x0c -#define e_scan 0x0d -#define e_tray_open 0x0f -#define e_no_disc 0x10 -#define e_tray stalled 0x11 - -/* drive configuration masks */ - -#define dcf_revision_code 0x7 -#define dcf_transfer_rate 0x60 -#define dcf_motorized_tray 0x80 - -/* disc status byte */ - -#define cds_multi_session 0x2 -#define cds_all_audio 0x8 -#define cds_xa_mode 0xf0 - -/* finally some ioctls for the driver */ - -#define CM206CTL_GET_STAT _IO( 0x20, 0 ) -#define CM206CTL_GET_LAST_STAT _IO( 0x20, 1 ) - -#ifdef STATISTICS - -/* This is an ugly way to guarantee that the names of the statistics - * are the same in the code and in the diagnostics program. */ - -#ifdef __KERNEL__ -#define x(a) st_ ## a -#define y enum -#else -#define x(a) #a -#define y char * stats_name[] = -#endif - -y {x(interrupt), x(data_ready), x(fifo_overflow), x(data_error), - x(crc_error), x(sync_error), x(lost_intr), x(echo), - x(write_timeout), x(receive_timeout), x(read_timeout), - x(dsb_timeout), x(stop_0xff), x(back_read_timeout), - x(sector_transferred), x(read_restarted), x(read_background), - x(bh), x(open), x(ioctl_multisession), x(attention) -#ifdef __KERNEL__ - , x(last_entry) -#endif - }; - -#ifdef __KERNEL__ -#define NR_STATS st_last_entry -#else -#define NR_STATS (sizeof(stats_name)/sizeof(char*)) -#endif - -#undef y -#undef x - -#endif /* STATISTICS */ - -#endif /* LINUX_CM206_H */ diff --git a/drivers/cdrom/gscd.c b/drivers/cdrom/gscd.c deleted file mode 100644 index b3ab6e9b8df..00000000000 --- a/drivers/cdrom/gscd.c +++ /dev/null @@ -1,1029 +0,0 @@ -#define GSCD_VERSION "0.4a Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>" - -/* - linux/drivers/block/gscd.c - GoldStar R420 CDROM driver - - Copyright (C) 1995 Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de> - based upon pre-works by Eberhard Moenkeberg <emoenke@gwdg.de> - - - For all kind of other information about the GoldStar CDROM - and this Linux device driver I installed a WWW-URL: - http://linux.rz.fh-hannover.de/~raupach - - - If you are the editor of a Linux CD, you should - enable gscd.c within your boot floppy kernel and - send me one of your CDs for free. - - - -------------------------------------------------------------------- - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - -------------------------------------------------------------------- - - 9 November 1999 -- Make kernel-parameter implementation work with 2.3.x - Removed init_module & cleanup_module in favor of - module_init & module_exit. - Torben Mathiasen <tmm@image.dk> - -*/ - -/* These settings are for various debug-level. Leave they untouched ... */ -#define NO_GSCD_DEBUG -#define NO_IOCTL_DEBUG -#define NO_MODULE_DEBUG -#define NO_FUTURE_WORK -/*------------------------*/ - -#include <linux/module.h> - -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/timer.h> -#include <linux/fs.h> -#include <linux/mm.h> -#include <linux/kernel.h> -#include <linux/cdrom.h> -#include <linux/ioport.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/init.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/uaccess.h> - -#define MAJOR_NR GOLDSTAR_CDROM_MAJOR -#include <linux/blkdev.h> -#include "gscd.h" - -static int gscdPresent = 0; - -static unsigned char gscd_buf[2048]; /* buffer for block size conversion */ -static int gscd_bn = -1; -static short gscd_port = GSCD_BASE_ADDR; -module_param_named(gscd, gscd_port, short, 0); - -/* Kommt spaeter vielleicht noch mal dran ... - * static DECLARE_WAIT_QUEUE_HEAD(gscd_waitq); - */ - -static void gscd_read_cmd(struct request *req); -static void gscd_hsg2msf(long hsg, struct msf *msf); -static void gscd_bin2bcd(unsigned char *p); - -/* Schnittstellen zum Kern/FS */ - -static void __do_gscd_request(unsigned long dummy); -static int gscd_ioctl(struct inode *, struct file *, unsigned int, - unsigned long); -static int gscd_open(struct inode *, struct file *); -static int gscd_release(struct inode *, struct file *); -static int check_gscd_med_chg(struct gendisk *disk); - -/* GoldStar Funktionen */ - -static void cmd_out(int, char *, char *, int); -static void cmd_status(void); -static void init_cd_drive(int); - -static int get_status(void); -static void clear_Audio(void); -static void cc_invalidate(void); - -/* some things for the next version */ -#ifdef FUTURE_WORK -static void update_state(void); -static long gscd_msf2hsg(struct msf *mp); -static int gscd_bcd2bin(unsigned char bcd); -#endif - - -/* lo-level cmd-Funktionen */ - -static void cmd_info_in(char *, int); -static void cmd_end(void); -static void cmd_read_b(char *, int, int); -static void cmd_read_w(char *, int, int); -static int cmd_unit_alive(void); -static void cmd_write_cmd(char *); - - -/* GoldStar Variablen */ - -static int curr_drv_state; -static int drv_states[] = { 0, 0, 0, 0, 0, 0, 0, 0 }; -static int drv_mode; -static int disk_state; -static int speed; -static int ndrives; - -static unsigned char drv_num_read; -static unsigned char f_dsk_valid; -static unsigned char current_drive; -static unsigned char f_drv_ok; - - -static char f_AudioPlay; -static char f_AudioPause; -static int AudioStart_m; -static int AudioStart_f; -static int AudioEnd_m; -static int AudioEnd_f; - -static DEFINE_TIMER(gscd_timer, NULL, 0, 0); -static DEFINE_SPINLOCK(gscd_lock); -static struct request_queue *gscd_queue; - -static struct block_device_operations gscd_fops = { - .owner = THIS_MODULE, - .open = gscd_open, - .release = gscd_release, - .ioctl = gscd_ioctl, - .media_changed = check_gscd_med_chg, -}; - -/* - * Checking if the media has been changed - * (not yet implemented) - */ -static int check_gscd_med_chg(struct gendisk *disk) -{ -#ifdef GSCD_DEBUG - printk("gscd: check_med_change\n"); -#endif - return 0; -} - - -#ifndef MODULE -/* Using new interface for kernel-parameters */ - -static int __init gscd_setup(char *str) -{ - int ints[2]; - (void) get_options(str, ARRAY_SIZE(ints), ints); - - if (ints[0] > 0) { - gscd_port = ints[1]; - } - return 1; -} - -__setup("gscd=", gscd_setup); - -#endif - -static int gscd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd, - unsigned long arg) -{ - unsigned char to_do[10]; - unsigned char dummy; - - - switch (cmd) { - case CDROMSTART: /* Spin up the drive */ - /* Don't think we can do this. Even if we could, - * I think the drive times out and stops after a while - * anyway. For now, ignore it. - */ - return 0; - - case CDROMRESUME: /* keine Ahnung was das ist */ - return 0; - - - case CDROMEJECT: - cmd_status(); - to_do[0] = CMD_TRAY_CTL; - cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0); - - return 0; - - default: - return -EINVAL; - } - -} - - -/* - * Take care of the different block sizes between cdrom and Linux. - * When Linux gets variable block sizes this will probably go away. - */ - -static void gscd_transfer(struct request *req) -{ - while (req->nr_sectors > 0 && gscd_bn == req->sector / 4) { - long offs = (req->sector & 3) * 512; - memcpy(req->buffer, gscd_buf + offs, 512); - req->nr_sectors--; - req->sector++; - req->buffer += 512; - } -} - - -/* - * I/O request routine called from Linux kernel. - */ - -static void do_gscd_request(request_queue_t * q) -{ - __do_gscd_request(0); -} - -static void __do_gscd_request(unsigned long dummy) -{ - struct request *req; - unsigned int block; - unsigned int nsect; - -repeat: - req = elv_next_request(gscd_queue); - if (!req) - return; - - block = req->sector; - nsect = req->nr_sectors; - - if (req->sector == -1) - goto out; - - if (req->cmd != READ) { - printk("GSCD: bad cmd %u\n", rq_data_dir(req)); - end_request(req, 0); - goto repeat; - } - - gscd_transfer(req); - - /* if we satisfied the request from the buffer, we're done. */ - - if (req->nr_sectors == 0) { - end_request(req, 1); - goto repeat; - } -#ifdef GSCD_DEBUG - printk("GSCD: block %d, nsect %d\n", block, nsect); -#endif - gscd_read_cmd(req); -out: - return; -} - - - -/* - * Check the result of the set-mode command. On success, send the - * read-data command. - */ - -static void gscd_read_cmd(struct request *req) -{ - long block; - struct gscd_Play_msf gscdcmd; - char cmd[] = { CMD_READ, 0x80, 0, 0, 0, 0, 1 }; /* cmd mode M-S-F secth sectl */ - - cmd_status(); - if (disk_state & (ST_NO_DISK | ST_DOOR_OPEN)) { - printk("GSCD: no disk or door open\n"); - end_request(req, 0); - } else { - if (disk_state & ST_INVALID) { - printk("GSCD: disk invalid\n"); - end_request(req, 0); - } else { - gscd_bn = -1; /* purge our buffer */ - block = req->sector / 4; - gscd_hsg2msf(block, &gscdcmd.start); /* cvt to msf format */ - - cmd[2] = gscdcmd.start.min; - cmd[3] = gscdcmd.start.sec; - cmd[4] = gscdcmd.start.frame; - -#ifdef GSCD_DEBUG - printk("GSCD: read msf %d:%d:%d\n", cmd[2], cmd[3], - cmd[4]); -#endif - cmd_out(TYPE_DATA, (char *) &cmd, - (char *) &gscd_buf[0], 1); - - gscd_bn = req->sector / 4; - gscd_transfer(req); - end_request(req, 1); - } - } - SET_TIMER(__do_gscd_request, 1); -} - - -/* - * Open the device special file. Check that a disk is in. - */ - -static int gscd_open(struct inode *ip, struct file *fp) -{ - int st; - -#ifdef GSCD_DEBUG - printk("GSCD: open\n"); -#endif - - if (gscdPresent == 0) - return -ENXIO; /* no hardware */ - - get_status(); - st = disk_state & (ST_NO_DISK | ST_DOOR_OPEN); - if (st) { - printk("GSCD: no disk or door open\n"); - return -ENXIO; - } - -/* if (updateToc() < 0) - return -EIO; -*/ - - return 0; -} - - -/* - * On close, we flush all gscd blocks from the buffer cache. - */ - -static int gscd_release(struct inode *inode, struct file *file) -{ - -#ifdef GSCD_DEBUG - printk("GSCD: release\n"); -#endif - - gscd_bn = -1; - - return 0; -} - - -static int get_status(void) -{ - int status; - - cmd_status(); - status = disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01); - - if (status == (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) { - cc_invalidate(); - return 1; - } else { - return 0; - } -} - - -static void cc_invalidate(void) -{ - drv_num_read = 0xFF; - f_dsk_valid = 0xFF; - current_drive = 0xFF; - f_drv_ok = 0xFF; - - clear_Audio(); - -} - -static void clear_Audio(void) -{ - - f_AudioPlay = 0; - f_AudioPause = 0; - AudioStart_m = 0; - AudioStart_f = 0; - AudioEnd_m = 0; - AudioEnd_f = 0; - -} - -/* - * waiting ? - */ - -static int wait_drv_ready(void) -{ - int found, read; - - do { - found = inb(GSCDPORT(0)); - found &= 0x0f; - read = inb(GSCDPORT(0)); - read &= 0x0f; - } while (read != found); - -#ifdef GSCD_DEBUG - printk("Wait for: %d\n", read); -#endif - - return read; -} - -static void cc_Ident(char *respons) -{ - char to_do[] = { CMD_IDENT, 0, 0 }; - - cmd_out(TYPE_INFO, (char *) &to_do, (char *) respons, (int) 0x1E); - -} - -static void cc_SetSpeed(void) -{ - char to_do[] = { CMD_SETSPEED, 0, 0 }; - char dummy; - - if (speed > 0) { - to_do[1] = speed & 0x0F; - cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0); - } -} - -static void cc_Reset(void) -{ - char to_do[] = { CMD_RESET, 0 }; - char dummy; - - cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0); -} - -static void cmd_status(void) -{ - char to_do[] = { CMD_STATUS, 0 }; - char dummy; - - cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0); - -#ifdef GSCD_DEBUG - printk("GSCD: Status: %d\n", disk_state); -#endif - -} - -static void cmd_out(int cmd_type, char *cmd, char *respo_buf, int respo_count) -{ - int result; - - - result = wait_drv_ready(); - if (result != drv_mode) { - unsigned long test_loops = 0xFFFF; - int i, dummy; - - outb(curr_drv_state, GSCDPORT(0)); - - /* LOCLOOP_170 */ - do { - result = wait_drv_ready(); - test_loops--; - } while ((result != drv_mode) && (test_loops > 0)); - - if (result != drv_mode) { - disk_state = ST_x08 | ST_x04 | ST_INVALID; - return; - } - - /* ...and waiting */ - for (i = 1, dummy = 1; i < 0xFFFF; i++) { - dummy *= i; - } - } - - /* LOC_172 */ - /* check the unit */ - /* and wake it up */ - if (cmd_unit_alive() != 0x08) { - /* LOC_174 */ - /* game over for this unit */ - disk_state = ST_x08 | ST_x04 | ST_INVALID; - return; - } - - /* LOC_176 */ -#ifdef GSCD_DEBUG - printk("LOC_176 "); -#endif - if (drv_mode == 0x09) { - /* magic... */ - printk("GSCD: magic ...\n"); - outb(result, GSCDPORT(2)); - } - - /* write the command to the drive */ - cmd_write_cmd(cmd); - - /* LOC_178 */ - for (;;) { - result = wait_drv_ready(); - if (result != drv_mode) { - /* LOC_179 */ - if (result == 0x04) { /* Mode 4 */ - /* LOC_205 */ -#ifdef GSCD_DEBUG - printk("LOC_205 "); -#endif - disk_state = inb(GSCDPORT(2)); - - do { - result = wait_drv_ready(); - } while (result != drv_mode); - return; - - } else { - if (result == 0x06) { /* Mode 6 */ - /* LOC_181 */ -#ifdef GSCD_DEBUG - printk("LOC_181 "); -#endif - - if (cmd_type == TYPE_DATA) { - /* read data */ - /* LOC_184 */ - if (drv_mode == 9) { - /* read the data to the buffer (word) */ - - /* (*(cmd+1))?(CD_FRAMESIZE/2):(CD_FRAMESIZE_RAW/2) */ - cmd_read_w - (respo_buf, - respo_count, - CD_FRAMESIZE / - 2); - return; - } else { - /* read the data to the buffer (byte) */ - - /* (*(cmd+1))?(CD_FRAMESIZE):(CD_FRAMESIZE_RAW) */ - cmd_read_b - (respo_buf, - respo_count, - CD_FRAMESIZE); - return; - } - } else { - /* read the info to the buffer */ - cmd_info_in(respo_buf, - respo_count); - return; - } - - return; - } - } - - } else { - disk_state = ST_x08 | ST_x04 | ST_INVALID; - return; - } - } /* for (;;) */ - - -#ifdef GSCD_DEBUG - printk("\n"); -#endif -} - - -static void cmd_write_cmd(char *pstr) -{ - int i, j; - - /* LOC_177 */ -#ifdef GSCD_DEBUG - printk("LOC_177 "); -#endif - - /* calculate the number of parameter */ - j = *pstr & 0x0F; - - /* shift it out */ - for (i = 0; i < j; i++) { - outb(*pstr, GSCDPORT(2)); - pstr++; - } -} - - -static int cmd_unit_alive(void) -{ - int result; - unsigned long max_test_loops; - - - /* LOC_172 */ -#ifdef GSCD_DEBUG - printk("LOC_172 "); -#endif - - outb(curr_drv_state, GSCDPORT(0)); - max_test_loops = 0xFFFF; - - do { - result = wait_drv_ready(); - max_test_loops--; - } while ((result != 0x08) && (max_test_loops > 0)); - - return result; -} - - -static void cmd_info_in(char *pb, int count) -{ - int result; - char read; - - - /* read info */ - /* LOC_182 */ -#ifdef GSCD_DEBUG - printk("LOC_182 "); -#endif - - do { - read = inb(GSCDPORT(2)); - if (count > 0) { - *pb = read; - pb++; - count--; - } - - /* LOC_183 */ - do { - result = wait_drv_ready(); - } while (result == 0x0E); - } while (result == 6); - - cmd_end(); - return; -} - - -static void cmd_read_b(char *pb, int count, int size) -{ - int result; - int i; - - - /* LOC_188 */ - /* LOC_189 */ -#ifdef GSCD_DEBUG - printk("LOC_189 "); -#endif - - do { - do { - result = wait_drv_ready(); - } while (result != 6 || result == 0x0E); - - if (result != 6) { - cmd_end(); - return; - } -#ifdef GSCD_DEBUG - printk("LOC_191 "); -#endif - - for (i = 0; i < size; i++) { - *pb = inb(GSCDPORT(2)); - pb++; - } - count--; - } while (count > 0); - - cmd_end(); - return; -} - - -static void cmd_end(void) -{ - int result; - - - /* LOC_204 */ -#ifdef GSCD_DEBUG - printk("LOC_204 "); -#endif - - do { - result = wait_drv_ready(); - if (result == drv_mode) { - return; - } - } while (result != 4); - - /* LOC_205 */ -#ifdef GSCD_DEBUG - printk("LOC_205 "); -#endif - - disk_state = inb(GSCDPORT(2)); - - do { - result = wait_drv_ready(); - } while (result != drv_mode); - return; - -} - - -static void cmd_read_w(char *pb, int count, int size) -{ - int result; - int i; - - -#ifdef GSCD_DEBUG - printk("LOC_185 "); -#endif - - do { - /* LOC_185 */ - do { - result = wait_drv_ready(); - } while (result != 6 || result == 0x0E); - - if (result != 6) { - cmd_end(); - return; - } - - for (i = 0; i < size; i++) { - /* na, hier muss ich noch mal drueber nachdenken */ - *pb = inw(GSCDPORT(2)); - pb++; - } - count--; - } while (count > 0); - - cmd_end(); - return; -} - -static int __init find_drives(void) -{ - int *pdrv; - int drvnum; - int subdrv; - int i; - - speed = 0; - pdrv = (int *) &drv_states; - curr_drv_state = 0xFE; - subdrv = 0; - drvnum = 0; - - for (i = 0; i < 8; i++) { - subdrv++; - cmd_status(); - disk_state &= ST_x08 | ST_x04 | ST_INVALID | ST_x01; - if (disk_state != (ST_x08 | ST_x04 | ST_INVALID)) { - /* LOC_240 */ - *pdrv = curr_drv_state; - init_cd_drive(drvnum); - pdrv++; - drvnum++; - } else { - if (subdrv < 2) { - continue; - } else { - subdrv = 0; - } - } - -/* curr_drv_state<<1; <-- das geht irgendwie nicht */ -/* muss heissen: curr_drv_state <<= 1; (ist ja Wert-Zuweisung) */ - curr_drv_state *= 2; - curr_drv_state |= 1; -#ifdef GSCD_DEBUG - printk("DriveState: %d\n", curr_drv_state); -#endif - } - - ndrives = drvnum; - return drvnum; -} - -static void __init init_cd_drive(int num) -{ - char resp[50]; - int i; - - printk("GSCD: init unit %d\n", num); - cc_Ident((char *) &resp); - - printk("GSCD: identification: "); - for (i = 0; i < 0x1E; i++) { - printk("%c", resp[i]); - } - printk("\n"); - - cc_SetSpeed(); - -} - -#ifdef FUTURE_WORK -/* return_done */ -static void update_state(void) -{ - unsigned int AX; - - - if ((disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) == 0) { - if (disk_state == (ST_x08 | ST_x04 | ST_INVALID)) { - AX = ST_INVALID; - } - - if ((disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) - == 0) { - invalidate(); - f_drv_ok = 0; - } - - AX |= 0x8000; - } - - if (disk_state & ST_PLAYING) { - AX |= 0x200; - } - - AX |= 0x100; - /* pkt_esbx = AX; */ - - disk_state = 0; - -} -#endif - -static struct gendisk *gscd_disk; - -static void __exit gscd_exit(void) -{ - CLEAR_TIMER; - - del_gendisk(gscd_disk); - put_disk(gscd_disk); - if ((unregister_blkdev(MAJOR_NR, "gscd") == -EINVAL)) { - printk("What's that: can't unregister GoldStar-module\n"); - return; - } - blk_cleanup_queue(gscd_queue); - release_region(gscd_port, GSCD_IO_EXTENT); - printk(KERN_INFO "GoldStar-module released.\n"); -} - -/* This is the common initialisation for the GoldStar drive. */ -/* It is called at boot time AND for module init. */ -static int __init gscd_init(void) -{ - int i; - int result; - int ret=0; - - printk(KERN_INFO "GSCD: version %s\n", GSCD_VERSION); - printk(KERN_INFO - "GSCD: Trying to detect a Goldstar R420 CD-ROM drive at 0x%X.\n", - gscd_port); - - if (!request_region(gscd_port, GSCD_IO_EXTENT, "gscd")) { - printk(KERN_WARNING "GSCD: Init failed, I/O port (%X) already" - " in use.\n", gscd_port); - return -EIO; - } - - - /* check for card */ - result = wait_drv_ready(); - if (result == 0x09) { - printk(KERN_WARNING "GSCD: DMA kann ich noch nicht!\n"); - ret = -EIO; - goto err_out1; - } - - if (result == 0x0b) { - drv_mode = result; - i = find_drives(); - if (i == 0) { - printk(KERN_WARNING "GSCD: GoldStar CD-ROM Drive is" - " not found.\n"); - ret = -EIO; - goto err_out1; - } - } - - if ((result != 0x0b) && (result != 0x09)) { - printk(KERN_WARNING "GSCD: GoldStar Interface Adapter does not " - "exist or H/W error\n"); - ret = -EIO; - goto err_out1; - } - - /* reset all drives */ - i = 0; - while (drv_states[i] != 0) { - curr_drv_state = drv_states[i]; - printk(KERN_INFO "GSCD: Reset unit %d ... ", i); - cc_Reset(); - printk("done\n"); - i++; - } - - gscd_disk = alloc_disk(1); - if (!gscd_disk) - goto err_out1; - gscd_disk->major = MAJOR_NR; - gscd_disk->first_minor = 0; - gscd_disk->fops = &gscd_fops; - sprintf(gscd_disk->disk_name, "gscd"); - - if (register_blkdev(MAJOR_NR, "gscd")) { - ret = -EIO; - goto err_out2; - } - - gscd_queue = blk_init_queue(do_gscd_request, &gscd_lock); - if (!gscd_queue) { - ret = -ENOMEM; - goto err_out3; - } - - disk_state = 0; - gscdPresent = 1; - - gscd_disk->queue = gscd_queue; - add_disk(gscd_disk); - - printk(KERN_INFO "GSCD: GoldStar CD-ROM Drive found.\n"); - return 0; - -err_out3: - unregister_blkdev(MAJOR_NR, "gscd"); -err_out2: - put_disk(gscd_disk); -err_out1: - release_region(gscd_port, GSCD_IO_EXTENT); - return ret; -} - -static void gscd_hsg2msf(long hsg, struct msf *msf) -{ - hsg += CD_MSF_OFFSET; - msf->min = hsg / (CD_FRAMES * CD_SECS); - hsg %= CD_FRAMES * CD_SECS; - msf->sec = hsg / CD_FRAMES; - msf->frame = hsg % CD_FRAMES; - - gscd_bin2bcd(&msf->min); /* convert to BCD */ - gscd_bin2bcd(&msf->sec); - gscd_bin2bcd(&msf->frame); -} - - -static void gscd_bin2bcd(unsigned char *p) -{ - int u, t; - - u = *p % 10; - t = *p / 10; - *p = u | (t << 4); -} - - -#ifdef FUTURE_WORK -static long gscd_msf2hsg(struct msf *mp) -{ - return gscd_bcd2bin(mp->frame) - + gscd_bcd2bin(mp->sec) * CD_FRAMES - + gscd_bcd2bin(mp->min) * CD_FRAMES * CD_SECS - CD_MSF_OFFSET; -} - -static int gscd_bcd2bin(unsigned char bcd) -{ - return (bcd >> 4) * 10 + (bcd & 0xF); -} -#endif - -MODULE_AUTHOR("Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>"); -MODULE_LICENSE("GPL"); -module_init(gscd_init); -module_exit(gscd_exit); -MODULE_ALIAS_BLOCKDEV_MAJOR(GOLDSTAR_CDROM_MAJOR); diff --git a/drivers/cdrom/gscd.h b/drivers/cdrom/gscd.h deleted file mode 100644 index a41e64bfc06..00000000000 --- a/drivers/cdrom/gscd.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Definitions for a GoldStar R420 CD-ROM interface - * - * Copyright (C) 1995 Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de> - * Eberhard Moenkeberg <emoenke@gwdg.de> - * - * Published under the GPL. - * - */ - - -/* The Interface Card default address is 0x340. This will work for most - applications. Address selection is accomplished by jumpers PN801-1 to - PN801-4 on the GoldStar Interface Card. - Appropriate settings are: 0x300, 0x310, 0x320, 0x330, 0x340, 0x350, 0x360 - 0x370, 0x380, 0x390, 0x3A0, 0x3B0, 0x3C0, 0x3D0, 0x3E0, 0x3F0 */ - -/* insert here the I/O port address and extent */ -#define GSCD_BASE_ADDR 0x340 -#define GSCD_IO_EXTENT 4 - - -/************** nothing to set up below here *********************/ - -/* port access macro */ -#define GSCDPORT(x) (gscd_port + (x)) - -/* - * commands - * the lower nibble holds the command length - */ -#define CMD_STATUS 0x01 -#define CMD_READSUBQ 0x02 /* 1: ?, 2: UPC, 5: ? */ -#define CMD_SEEK 0x05 /* read_mode M-S-F */ -#define CMD_READ 0x07 /* read_mode M-S-F nsec_h nsec_l */ -#define CMD_RESET 0x11 -#define CMD_SETMODE 0x15 -#define CMD_PLAY 0x17 /* M-S-F M-S-F */ -#define CMD_LOCK_CTL 0x22 /* 0: unlock, 1: lock */ -#define CMD_IDENT 0x31 -#define CMD_SETSPEED 0x32 /* 0: auto */ /* ??? */ -#define CMD_GETMODE 0x41 -#define CMD_PAUSE 0x51 -#define CMD_READTOC 0x61 -#define CMD_DISKINFO 0x71 -#define CMD_TRAY_CTL 0x81 - -/* - * disk_state: - */ -#define ST_PLAYING 0x80 -#define ST_UNLOCKED 0x40 -#define ST_NO_DISK 0x20 -#define ST_DOOR_OPEN 0x10 -#define ST_x08 0x08 -#define ST_x04 0x04 -#define ST_INVALID 0x02 -#define ST_x01 0x01 - -/* - * cmd_type: - */ -#define TYPE_INFO 0x01 -#define TYPE_DATA 0x02 - -/* - * read_mode: - */ -#define MOD_POLLED 0x80 -#define MOD_x08 0x08 -#define MOD_RAW 0x04 - -#define READ_DATA(port, buf, nr) insb(port, buf, nr) - -#define SET_TIMER(func, jifs) \ - ((mod_timer(&gscd_timer, jiffies + jifs)), \ - (gscd_timer.function = func)) - -#define CLEAR_TIMER del_timer_sync(&gscd_timer) - -#define MAX_TRACKS 104 - -struct msf { - unsigned char min; - unsigned char sec; - unsigned char frame; -}; - -struct gscd_Play_msf { - struct msf start; - struct msf end; -}; - -struct gscd_DiskInfo { - unsigned char first; - unsigned char last; - struct msf diskLength; - struct msf firstTrack; -}; - -struct gscd_Toc { - unsigned char ctrl_addr; - unsigned char track; - unsigned char pointIndex; - struct msf trackTime; - struct msf diskTime; -}; - diff --git a/drivers/cdrom/isp16.c b/drivers/cdrom/isp16.c deleted file mode 100644 index db0fd9a240e..00000000000 --- a/drivers/cdrom/isp16.c +++ /dev/null @@ -1,374 +0,0 @@ -/* -- ISP16 cdrom detection and configuration - * - * Copyright (c) 1995,1996 Eric van der Maarel <H.T.M.v.d.Maarel@marin.nl> - * - * Version 0.6 - * - * History: - * 0.5 First release. - * Was included in the sjcd and optcd cdrom drivers. - * 0.6 First "stand-alone" version. - * Removed sound configuration. - * Added "module" support. - * - * 9 November 1999 -- Make kernel-parameter implementation work with 2.3.x - * Removed init_module & cleanup_module in favor of - * module_init & module_exit. - * Torben Mathiasen <tmm@image.dk> - * - * 19 June 2004 -- check_region() converted to request_region() - * and return statement cleanups. - * - Jesper Juhl - * - * Detect cdrom interface on ISP16 sound card. - * Configure cdrom interface. - * - * Algorithm for the card with OPTi 82C928 taken - * from the CDSETUP.SYS driver for MSDOS, - * by OPTi Computers, version 2.03. - * Algorithm for the card with OPTi 82C929 as communicated - * to me by Vadim Model and Leo Spiekman. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#define ISP16_VERSION_MAJOR 0 -#define ISP16_VERSION_MINOR 6 - -#include <linux/module.h> - -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <asm/io.h> -#include "isp16.h" - -static short isp16_detect(void); -static short isp16_c928__detect(void); -static short isp16_c929__detect(void); -static short isp16_cdi_config(int base, u_char drive_type, int irq, - int dma); -static short isp16_type; /* dependent on type of interface card */ -static u_char isp16_ctrl; -static u_short isp16_enable_port; - -static int isp16_cdrom_base = ISP16_CDROM_IO_BASE; -static int isp16_cdrom_irq = ISP16_CDROM_IRQ; -static int isp16_cdrom_dma = ISP16_CDROM_DMA; -static char *isp16_cdrom_type = ISP16_CDROM_TYPE; - -module_param(isp16_cdrom_base, int, 0); -module_param(isp16_cdrom_irq, int, 0); -module_param(isp16_cdrom_dma, int, 0); -module_param(isp16_cdrom_type, charp, 0); - -#define ISP16_IN(p) (outb(isp16_ctrl,ISP16_CTRL_PORT), inb(p)) -#define ISP16_OUT(p,b) (outb(isp16_ctrl,ISP16_CTRL_PORT), outb(b,p)) - -#ifndef MODULE - -static int -__init isp16_setup(char *str) -{ - int ints[4]; - - (void) get_options(str, ARRAY_SIZE(ints), ints); - if (ints[0] > 0) - isp16_cdrom_base = ints[1]; - if (ints[0] > 1) - isp16_cdrom_irq = ints[2]; - if (ints[0] > 2) - isp16_cdrom_dma = ints[3]; - if (str) - isp16_cdrom_type = str; - - return 1; -} - -__setup("isp16=", isp16_setup); - -#endif /* MODULE */ - -/* - * ISP16 initialisation. - * - */ -static int __init isp16_init(void) -{ - u_char expected_drive; - - printk(KERN_INFO - "ISP16: configuration cdrom interface, version %d.%d.\n", - ISP16_VERSION_MAJOR, ISP16_VERSION_MINOR); - - if (!strcmp(isp16_cdrom_type, "noisp16")) { - printk("ISP16: no cdrom interface configured.\n"); - return 0; - } - - if (!request_region(ISP16_IO_BASE, ISP16_IO_SIZE, "isp16")) { - printk("ISP16: i/o ports already in use.\n"); - goto out; - } - - if ((isp16_type = isp16_detect()) < 0) { - printk("ISP16: no cdrom interface found.\n"); - goto cleanup_out; - } - - printk(KERN_INFO - "ISP16: cdrom interface (with OPTi 82C92%d chip) detected.\n", - (isp16_type == 2) ? 9 : 8); - - if (!strcmp(isp16_cdrom_type, "Sanyo")) - expected_drive = - (isp16_type ? ISP16_SANYO1 : ISP16_SANYO0); - else if (!strcmp(isp16_cdrom_type, "Sony")) - expected_drive = ISP16_SONY; - else if (!strcmp(isp16_cdrom_type, "Panasonic")) - expected_drive = - (isp16_type ? ISP16_PANASONIC1 : ISP16_PANASONIC0); - else if (!strcmp(isp16_cdrom_type, "Mitsumi")) - expected_drive = ISP16_MITSUMI; - else { - printk("ISP16: %s not supported by cdrom interface.\n", - isp16_cdrom_type); - goto cleanup_out; - } - - if (isp16_cdi_config(isp16_cdrom_base, expected_drive, - isp16_cdrom_irq, isp16_cdrom_dma) < 0) { - printk - ("ISP16: cdrom interface has not been properly configured.\n"); - goto cleanup_out; - } - printk(KERN_INFO - "ISP16: cdrom interface set up with io base 0x%03X, irq %d, dma %d," - " type %s.\n", isp16_cdrom_base, isp16_cdrom_irq, - isp16_cdrom_dma, isp16_cdrom_type); - return 0; - -cleanup_out: - release_region(ISP16_IO_BASE, ISP16_IO_SIZE); -out: - return -EIO; -} - -static short __init isp16_detect(void) -{ - - if (isp16_c929__detect() >= 0) - return 2; - else - return (isp16_c928__detect()); -} - -static short __init isp16_c928__detect(void) -{ - u_char ctrl; - u_char enable_cdrom; - u_char io; - short i = -1; - - isp16_ctrl = ISP16_C928__CTRL; - isp16_enable_port = ISP16_C928__ENABLE_PORT; - - /* read' and write' are a special read and write, respectively */ - - /* read' ISP16_CTRL_PORT, clear last two bits and write' back the result */ - ctrl = ISP16_IN(ISP16_CTRL_PORT) & 0xFC; - ISP16_OUT(ISP16_CTRL_PORT, ctrl); - - /* read' 3,4 and 5-bit from the cdrom enable port */ - enable_cdrom = ISP16_IN(ISP16_C928__ENABLE_PORT) & 0x38; - - if (!(enable_cdrom & 0x20)) { /* 5-bit not set */ - /* read' last 2 bits of ISP16_IO_SET_PORT */ - io = ISP16_IN(ISP16_IO_SET_PORT) & 0x03; - if (((io & 0x01) << 1) == (io & 0x02)) { /* bits are the same */ - if (io == 0) { /* ...the same and 0 */ - i = 0; - enable_cdrom |= 0x20; - } else { /* ...the same and 1 *//* my card, first time 'round */ - i = 1; - enable_cdrom |= 0x28; - } - ISP16_OUT(ISP16_C928__ENABLE_PORT, enable_cdrom); - } else { /* bits are not the same */ - ISP16_OUT(ISP16_CTRL_PORT, ctrl); - return i; /* -> not detected: possibly incorrect conclusion */ - } - } else if (enable_cdrom == 0x20) - i = 0; - else if (enable_cdrom == 0x28) /* my card, already initialised */ - i = 1; - - ISP16_OUT(ISP16_CTRL_PORT, ctrl); - - return i; -} - -static short __init isp16_c929__detect(void) -{ - u_char ctrl; - u_char tmp; - - isp16_ctrl = ISP16_C929__CTRL; - isp16_enable_port = ISP16_C929__ENABLE_PORT; - - /* read' and write' are a special read and write, respectively */ - - /* read' ISP16_CTRL_PORT and save */ - ctrl = ISP16_IN(ISP16_CTRL_PORT); - - /* write' zero to the ctrl port and get response */ - ISP16_OUT(ISP16_CTRL_PORT, 0); - tmp = ISP16_IN(ISP16_CTRL_PORT); - - if (tmp != 2) /* isp16 with 82C929 not detected */ - return -1; - - /* restore ctrl port value */ - ISP16_OUT(ISP16_CTRL_PORT, ctrl); - - return 2; -} - -static short __init -isp16_cdi_config(int base, u_char drive_type, int irq, int dma) -{ - u_char base_code; - u_char irq_code; - u_char dma_code; - u_char i; - - if ((drive_type == ISP16_MITSUMI) && (dma != 0)) - printk("ISP16: Mitsumi cdrom drive has no dma support.\n"); - - switch (base) { - case 0x340: - base_code = ISP16_BASE_340; - break; - case 0x330: - base_code = ISP16_BASE_330; - break; - case 0x360: - base_code = ISP16_BASE_360; - break; - case 0x320: - base_code = ISP16_BASE_320; - break; - default: - printk - ("ISP16: base address 0x%03X not supported by cdrom interface.\n", - base); - return -1; - } - switch (irq) { - case 0: - irq_code = ISP16_IRQ_X; - break; /* disable irq */ - case 5: - irq_code = ISP16_IRQ_5; - printk("ISP16: irq 5 shouldn't be used by cdrom interface," - " due to possible conflicts with the sound card.\n"); - break; - case 7: - irq_code = ISP16_IRQ_7; - printk("ISP16: irq 7 shouldn't be used by cdrom interface," - " due to possible conflicts with the sound card.\n"); - break; - case 3: - irq_code = ISP16_IRQ_3; - break; - case 9: - irq_code = ISP16_IRQ_9; - break; - case 10: - irq_code = ISP16_IRQ_10; - break; - case 11: - irq_code = ISP16_IRQ_11; - break; - default: - printk("ISP16: irq %d not supported by cdrom interface.\n", - irq); - return -1; - } - switch (dma) { - case 0: - dma_code = ISP16_DMA_X; - break; /* disable dma */ - case 1: - printk("ISP16: dma 1 cannot be used by cdrom interface," - " due to conflict with the sound card.\n"); - return -1; - break; - case 3: - dma_code = ISP16_DMA_3; - break; - case 5: - dma_code = ISP16_DMA_5; - break; - case 6: - dma_code = ISP16_DMA_6; - break; - case 7: - dma_code = ISP16_DMA_7; - break; - default: - printk("ISP16: dma %d not supported by cdrom interface.\n", - dma); - return -1; - } - - if (drive_type != ISP16_SONY && drive_type != ISP16_PANASONIC0 && - drive_type != ISP16_PANASONIC1 && drive_type != ISP16_SANYO0 && - drive_type != ISP16_SANYO1 && drive_type != ISP16_MITSUMI && - drive_type != ISP16_DRIVE_X) { - printk - ("ISP16: drive type (code 0x%02X) not supported by cdrom" - " interface.\n", drive_type); - return -1; - } - - /* set type of interface */ - i = ISP16_IN(ISP16_DRIVE_SET_PORT) & ISP16_DRIVE_SET_MASK; /* clear some bits */ - ISP16_OUT(ISP16_DRIVE_SET_PORT, i | drive_type); - - /* enable cdrom on interface with 82C929 chip */ - if (isp16_type > 1) - ISP16_OUT(isp16_enable_port, ISP16_ENABLE_CDROM); - - /* set base address, irq and dma */ - i = ISP16_IN(ISP16_IO_SET_PORT) & ISP16_IO_SET_MASK; /* keep some bits */ - ISP16_OUT(ISP16_IO_SET_PORT, i | base_code | irq_code | dma_code); - - return 0; -} - -static void __exit isp16_exit(void) -{ - release_region(ISP16_IO_BASE, ISP16_IO_SIZE); - printk(KERN_INFO "ISP16: module released.\n"); -} - -module_init(isp16_init); -module_exit(isp16_exit); - -MODULE_LICENSE("GPL"); diff --git a/drivers/cdrom/isp16.h b/drivers/cdrom/isp16.h deleted file mode 100644 index 5bd22c8f7a9..00000000000 --- a/drivers/cdrom/isp16.h +++ /dev/null @@ -1,72 +0,0 @@ -/* -- isp16.h - * - * Header for detection and initialisation of cdrom interface (only) on - * ISP16 (MAD16, Mozart) sound card. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -/* These are the default values */ -#define ISP16_CDROM_TYPE "Sanyo" -#define ISP16_CDROM_IO_BASE 0x340 -#define ISP16_CDROM_IRQ 0 -#define ISP16_CDROM_DMA 0 - -/* Some (Media)Magic */ -/* define types of drive the interface on an ISP16 card may be looking at */ -#define ISP16_DRIVE_X 0x00 -#define ISP16_SONY 0x02 -#define ISP16_PANASONIC0 0x02 -#define ISP16_SANYO0 0x02 -#define ISP16_MITSUMI 0x04 -#define ISP16_PANASONIC1 0x06 -#define ISP16_SANYO1 0x06 -#define ISP16_DRIVE_NOT_USED 0x08 /* not used */ -#define ISP16_DRIVE_SET_MASK 0xF1 /* don't change 0-bit or 4-7-bits*/ -/* ...for port */ -#define ISP16_DRIVE_SET_PORT 0xF8D -/* set io parameters */ -#define ISP16_BASE_340 0x00 -#define ISP16_BASE_330 0x40 -#define ISP16_BASE_360 0x80 -#define ISP16_BASE_320 0xC0 -#define ISP16_IRQ_X 0x00 -#define ISP16_IRQ_5 0x04 /* shouldn't be used to avoid sound card conflicts */ -#define ISP16_IRQ_7 0x08 /* shouldn't be used to avoid sound card conflicts */ -#define ISP16_IRQ_3 0x0C -#define ISP16_IRQ_9 0x10 -#define ISP16_IRQ_10 0x14 -#define ISP16_IRQ_11 0x18 -#define ISP16_DMA_X 0x03 -#define ISP16_DMA_3 0x00 -#define ISP16_DMA_5 0x00 -#define ISP16_DMA_6 0x01 -#define ISP16_DMA_7 0x02 -#define ISP16_IO_SET_MASK 0x20 /* don't change 5-bit */ -/* ...for port */ -#define ISP16_IO_SET_PORT 0xF8E -/* enable the card */ -#define ISP16_C928__ENABLE_PORT 0xF90 /* ISP16 with OPTi 82C928 chip */ -#define ISP16_C929__ENABLE_PORT 0xF91 /* ISP16 with OPTi 82C929 chip */ -#define ISP16_ENABLE_CDROM 0x80 /* seven bit */ - -/* the magic stuff */ -#define ISP16_CTRL_PORT 0xF8F -#define ISP16_C928__CTRL 0xE2 /* ISP16 with OPTi 82C928 chip */ -#define ISP16_C929__CTRL 0xE3 /* ISP16 with OPTi 82C929 chip */ - -#define ISP16_IO_BASE 0xF8D -#define ISP16_IO_SIZE 5 /* ports used from 0xF8D up to 0xF91 */ diff --git a/drivers/cdrom/mcdx.c b/drivers/cdrom/mcdx.c deleted file mode 100644 index 4310cc84dfe..00000000000 --- a/drivers/cdrom/mcdx.c +++ /dev/null @@ -1,1943 +0,0 @@ -/* - * The Mitsumi CDROM interface - * Copyright (C) 1995 1996 Heiko Schlittermann <heiko@lotte.sax.de> - * VERSION: 2.14(hs) - * - * ... anyway, I'm back again, thanks to Marcin, he adopted - * large portions of my code (at least the parts containing - * my main thoughts ...) - * - ****************** H E L P ********************************* - * If you ever plan to update your CD ROM drive and perhaps - * want to sell or simply give away your Mitsumi FX-001[DS] - * -- Please -- - * mail me (heiko@lotte.sax.de). When my last drive goes - * ballistic no more driver support will be available from me! - ************************************************************* - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Thanks to - * The Linux Community at all and ... - * Martin Harriss (he wrote the first Mitsumi Driver) - * Eberhard Moenkeberg (he gave me much support and the initial kick) - * Bernd Huebner, Ruediger Helsch (Unifix-Software GmbH, they - * improved the original driver) - * Jon Tombs, Bjorn Ekwall (module support) - * Daniel v. Mosnenck (he sent me the Technical and Programming Reference) - * Gerd Knorr (he lent me his PhotoCD) - * Nils Faerber and Roger E. Wolff (extensively tested the LU portion) - * Andreas Kies (testing the mysterious hang-ups) - * Heiko Eissfeldt (VERIFY_READ/WRITE) - * Marcin Dalecki (improved performance, shortened code) - * ... somebody forgotten? - * - * 9 November 1999 -- Make kernel-parameter implementation work with 2.3.x - * Removed init_module & cleanup_module in favor of - * module_init & module_exit. - * Torben Mathiasen <tmm@image.dk> - */ - - -#ifdef RCS -static const char *mcdx_c_version - = "$Id: mcdx.c,v 1.21 1997/01/26 07:12:59 davem Exp $"; -#endif - -#include <linux/module.h> - -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/cdrom.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <asm/io.h> -#include <asm/current.h> -#include <asm/uaccess.h> - -#include <linux/major.h> -#define MAJOR_NR MITSUMI_X_CDROM_MAJOR -#include <linux/blkdev.h> - -#include "mcdx.h" - -#ifndef HZ -#error HZ not defined -#endif - -#define xwarn(fmt, args...) printk(KERN_WARNING MCDX " " fmt, ## args) - -#if !MCDX_QUIET -#define xinfo(fmt, args...) printk(KERN_INFO MCDX " " fmt, ## args) -#else -#define xinfo(fmt, args...) { ; } -#endif - -#if MCDX_DEBUG -#define xtrace(lvl, fmt, args...) \ - { if (lvl > 0) \ - { printk(KERN_DEBUG MCDX ":: " fmt, ## args); } } -#define xdebug(fmt, args...) printk(KERN_DEBUG MCDX ":: " fmt, ## args) -#else -#define xtrace(lvl, fmt, args...) { ; } -#define xdebug(fmt, args...) { ; } -#endif - -/* CONSTANTS *******************************************************/ - -/* Following are the number of sectors we _request_ from the drive - every time an access outside the already requested range is done. - The _direct_ size is the number of sectors we're allowed to skip - directly (performing a read instead of requesting the new sector - needed */ -static const int REQUEST_SIZE = 800; /* should be less then 255 * 4 */ -static const int DIRECT_SIZE = 400; /* should be less then REQUEST_SIZE */ - -enum drivemodes { TOC, DATA, RAW, COOKED }; -enum datamodes { MODE0, MODE1, MODE2 }; -enum resetmodes { SOFT, HARD }; - -static const int SINGLE = 0x01; /* single speed drive (FX001S, LU) */ -static const int DOUBLE = 0x02; /* double speed drive (FX001D, ..? */ -static const int DOOR = 0x04; /* door locking capability */ -static const int MULTI = 0x08; /* multi session capability */ - -static const unsigned char READ1X = 0xc0; -static const unsigned char READ2X = 0xc1; - - -/* DECLARATIONS ****************************************************/ -struct s_subqcode { - unsigned char control; - unsigned char tno; - unsigned char index; - struct cdrom_msf0 tt; - struct cdrom_msf0 dt; -}; - -struct s_diskinfo { - unsigned int n_first; - unsigned int n_last; - struct cdrom_msf0 msf_leadout; - struct cdrom_msf0 msf_first; -}; - -struct s_multi { - unsigned char multi; - struct cdrom_msf0 msf_last; -}; - -struct s_version { - unsigned char code; - unsigned char ver; -}; - -/* Per drive/controller stuff **************************************/ - -struct s_drive_stuff { - /* waitqueues */ - wait_queue_head_t busyq; - wait_queue_head_t lockq; - wait_queue_head_t sleepq; - - /* flags */ - volatile int introk; /* status of last irq operation */ - volatile int busy; /* drive performs an operation */ - volatile int lock; /* exclusive usage */ - - /* cd infos */ - struct s_diskinfo di; - struct s_multi multi; - struct s_subqcode *toc; /* first entry of the toc array */ - struct s_subqcode start; - struct s_subqcode stop; - int xa; /* 1 if xa disk */ - int audio; /* 1 if audio disk */ - int audiostatus; - - /* `buffer' control */ - volatile int valid; /* pending, ..., values are valid */ - volatile int pending; /* next sector to be read */ - volatile int low_border; /* first sector not to be skipped direct */ - volatile int high_border; /* first sector `out of area' */ -#ifdef AK2 - volatile int int_err; -#endif /* AK2 */ - - /* adds and odds */ - unsigned wreg_data; /* w data */ - unsigned wreg_reset; /* w hardware reset */ - unsigned wreg_hcon; /* w hardware conf */ - unsigned wreg_chn; /* w channel */ - unsigned rreg_data; /* r data */ - unsigned rreg_status; /* r status */ - - int irq; /* irq used by this drive */ - int present; /* drive present and its capabilities */ - unsigned char readcmd; /* read cmd depends on single/double speed */ - unsigned char playcmd; /* play should always be single speed */ - unsigned int xxx; /* set if changed, reset while open */ - unsigned int yyy; /* set if changed, reset by media_changed */ - int users; /* keeps track of open/close */ - int lastsector; /* last block accessible */ - int status; /* last operation's error / status */ - int readerrs; /* # of blocks read w/o error */ - struct cdrom_device_info info; - struct gendisk *disk; -}; - - -/* Prototypes ******************************************************/ - -/* The following prototypes are already declared elsewhere. They are - repeated here to show what's going on. And to sense, if they're - changed elsewhere. */ - -static int mcdx_init(void); - -static int mcdx_block_open(struct inode *inode, struct file *file) -{ - struct s_drive_stuff *p = inode->i_bdev->bd_disk->private_data; - return cdrom_open(&p->info, inode, file); -} - -static int mcdx_block_release(struct inode *inode, struct file *file) -{ - struct s_drive_stuff *p = inode->i_bdev->bd_disk->private_data; - return cdrom_release(&p->info, file); -} - -static int mcdx_block_ioctl(struct inode *inode, struct file *file, - unsigned cmd, unsigned long arg) -{ - struct s_drive_stuff *p = inode->i_bdev->bd_disk->private_data; - return cdrom_ioctl(file, &p->info, inode, cmd, arg); -} - -static int mcdx_block_media_changed(struct gendisk *disk) -{ - struct s_drive_stuff *p = disk->private_data; - return cdrom_media_changed(&p->info); -} - -static struct block_device_operations mcdx_bdops = -{ - .owner = THIS_MODULE, - .open = mcdx_block_open, - .release = mcdx_block_release, - .ioctl = mcdx_block_ioctl, - .media_changed = mcdx_block_media_changed, -}; - - -/* Indirect exported functions. These functions are exported by their - addresses, such as mcdx_open and mcdx_close in the - structure mcdx_dops. */ - -/* exported by file_ops */ -static int mcdx_open(struct cdrom_device_info *cdi, int purpose); -static void mcdx_close(struct cdrom_device_info *cdi); -static int mcdx_media_changed(struct cdrom_device_info *cdi, int disc_nr); -static int mcdx_tray_move(struct cdrom_device_info *cdi, int position); -static int mcdx_lockdoor(struct cdrom_device_info *cdi, int lock); -static int mcdx_audio_ioctl(struct cdrom_device_info *cdi, - unsigned int cmd, void *arg); - -/* misc internal support functions */ -static void log2msf(unsigned int, struct cdrom_msf0 *); -static unsigned int msf2log(const struct cdrom_msf0 *); -static unsigned int uint2bcd(unsigned int); -static unsigned int bcd2uint(unsigned char); -static unsigned port(int *); -static int irq(int *); -static void mcdx_delay(struct s_drive_stuff *, long jifs); -static int mcdx_transfer(struct s_drive_stuff *, char *buf, int sector, - int nr_sectors); -static int mcdx_xfer(struct s_drive_stuff *, char *buf, int sector, - int nr_sectors); - -static int mcdx_config(struct s_drive_stuff *, int); -static int mcdx_requestversion(struct s_drive_stuff *, struct s_version *, - int); -static int mcdx_stop(struct s_drive_stuff *, int); -static int mcdx_hold(struct s_drive_stuff *, int); -static int mcdx_reset(struct s_drive_stuff *, enum resetmodes, int); -static int mcdx_setdrivemode(struct s_drive_stuff *, enum drivemodes, int); -static int mcdx_setdatamode(struct s_drive_stuff *, enum datamodes, int); -static int mcdx_requestsubqcode(struct s_drive_stuff *, - struct s_subqcode *, int); -static int mcdx_requestmultidiskinfo(struct s_drive_stuff *, - struct s_multi *, int); -static int mcdx_requesttocdata(struct s_drive_stuff *, struct s_diskinfo *, - int); -static int mcdx_getstatus(struct s_drive_stuff *, int); -static int mcdx_getval(struct s_drive_stuff *, int to, int delay, char *); -static int mcdx_talk(struct s_drive_stuff *, - const unsigned char *cmd, size_t, - void *buffer, size_t size, unsigned int timeout, int); -static int mcdx_readtoc(struct s_drive_stuff *); -static int mcdx_playtrk(struct s_drive_stuff *, const struct cdrom_ti *); -static int mcdx_playmsf(struct s_drive_stuff *, const struct cdrom_msf *); -static int mcdx_setattentuator(struct s_drive_stuff *, - struct cdrom_volctrl *, int); - -/* static variables ************************************************/ - -static int mcdx_drive_map[][2] = MCDX_DRIVEMAP; -static struct s_drive_stuff *mcdx_stuffp[MCDX_NDRIVES]; -static DEFINE_SPINLOCK(mcdx_lock); -static struct request_queue *mcdx_queue; - -/* You can only set the first two pairs, from old MODULE_PARM code. */ -static int mcdx_set(const char *val, struct kernel_param *kp) -{ - get_options((char *)val, 4, (int *)mcdx_drive_map); - return 0; -} -module_param_call(mcdx, mcdx_set, NULL, NULL, 0); - -static struct cdrom_device_ops mcdx_dops = { - .open = mcdx_open, - .release = mcdx_close, - .media_changed = mcdx_media_changed, - .tray_move = mcdx_tray_move, - .lock_door = mcdx_lockdoor, - .audio_ioctl = mcdx_audio_ioctl, - .capability = CDC_OPEN_TRAY | CDC_LOCK | CDC_MEDIA_CHANGED | - CDC_PLAY_AUDIO | CDC_DRIVE_STATUS, -}; - -/* KERNEL INTERFACE FUNCTIONS **************************************/ - - -static int mcdx_audio_ioctl(struct cdrom_device_info *cdi, - unsigned int cmd, void *arg) -{ - struct s_drive_stuff *stuffp = cdi->handle; - - if (!stuffp->present) - return -ENXIO; - - if (stuffp->xxx) { - if (-1 == mcdx_requesttocdata(stuffp, &stuffp->di, 1)) { - stuffp->lastsector = -1; - } else { - stuffp->lastsector = (CD_FRAMESIZE / 512) - * msf2log(&stuffp->di.msf_leadout) - 1; - } - - if (stuffp->toc) { - kfree(stuffp->toc); - stuffp->toc = NULL; - if (-1 == mcdx_readtoc(stuffp)) - return -1; - } - - stuffp->xxx = 0; - } - - switch (cmd) { - case CDROMSTART:{ - xtrace(IOCTL, "ioctl() START\n"); - /* Spin up the drive. Don't think we can do this. - * For now, ignore it. - */ - return 0; - } - - case CDROMSTOP:{ - xtrace(IOCTL, "ioctl() STOP\n"); - stuffp->audiostatus = CDROM_AUDIO_INVALID; - if (-1 == mcdx_stop(stuffp, 1)) - return -EIO; - return 0; - } - - case CDROMPLAYTRKIND:{ - struct cdrom_ti *ti = (struct cdrom_ti *) arg; - - xtrace(IOCTL, "ioctl() PLAYTRKIND\n"); - if ((ti->cdti_trk0 < stuffp->di.n_first) - || (ti->cdti_trk0 > stuffp->di.n_last) - || (ti->cdti_trk1 < stuffp->di.n_first)) - return -EINVAL; - if (ti->cdti_trk1 > stuffp->di.n_last) - ti->cdti_trk1 = stuffp->di.n_last; - xtrace(PLAYTRK, "ioctl() track %d to %d\n", - ti->cdti_trk0, ti->cdti_trk1); - return mcdx_playtrk(stuffp, ti); - } - - case CDROMPLAYMSF:{ - struct cdrom_msf *msf = (struct cdrom_msf *) arg; - - xtrace(IOCTL, "ioctl() PLAYMSF\n"); - - if ((stuffp->audiostatus == CDROM_AUDIO_PLAY) - && (-1 == mcdx_hold(stuffp, 1))) - return -EIO; - - msf->cdmsf_min0 = uint2bcd(msf->cdmsf_min0); - msf->cdmsf_sec0 = uint2bcd(msf->cdmsf_sec0); - msf->cdmsf_frame0 = uint2bcd(msf->cdmsf_frame0); - - msf->cdmsf_min1 = uint2bcd(msf->cdmsf_min1); - msf->cdmsf_sec1 = uint2bcd(msf->cdmsf_sec1); - msf->cdmsf_frame1 = uint2bcd(msf->cdmsf_frame1); - - stuffp->stop.dt.minute = msf->cdmsf_min1; - stuffp->stop.dt.second = msf->cdmsf_sec1; - stuffp->stop.dt.frame = msf->cdmsf_frame1; - - return mcdx_playmsf(stuffp, msf); - } - - case CDROMRESUME:{ - xtrace(IOCTL, "ioctl() RESUME\n"); - return mcdx_playtrk(stuffp, NULL); - } - - case CDROMREADTOCENTRY:{ - struct cdrom_tocentry *entry = - (struct cdrom_tocentry *) arg; - struct s_subqcode *tp = NULL; - xtrace(IOCTL, "ioctl() READTOCENTRY\n"); - - if (-1 == mcdx_readtoc(stuffp)) - return -1; - if (entry->cdte_track == CDROM_LEADOUT) - tp = &stuffp->toc[stuffp->di.n_last - - stuffp->di.n_first + 1]; - else if (entry->cdte_track > stuffp->di.n_last - || entry->cdte_track < stuffp->di.n_first) - return -EINVAL; - else - tp = &stuffp->toc[entry->cdte_track - - stuffp->di.n_first]; - - if (NULL == tp) - return -EIO; - entry->cdte_adr = tp->control; - entry->cdte_ctrl = tp->control >> 4; - /* Always return stuff in MSF, and let the Uniform cdrom driver - worry about what the user actually wants */ - entry->cdte_addr.msf.minute = - bcd2uint(tp->dt.minute); - entry->cdte_addr.msf.second = - bcd2uint(tp->dt.second); - entry->cdte_addr.msf.frame = - bcd2uint(tp->dt.frame); - return 0; - } - - case CDROMSUBCHNL:{ - struct cdrom_subchnl *sub = - (struct cdrom_subchnl *) arg; - struct s_subqcode q; - - xtrace(IOCTL, "ioctl() SUBCHNL\n"); - - if (-1 == mcdx_requestsubqcode(stuffp, &q, 2)) - return -EIO; - - xtrace(SUBCHNL, "audiostatus: %x\n", - stuffp->audiostatus); - sub->cdsc_audiostatus = stuffp->audiostatus; - sub->cdsc_adr = q.control; - sub->cdsc_ctrl = q.control >> 4; - sub->cdsc_trk = bcd2uint(q.tno); - sub->cdsc_ind = bcd2uint(q.index); - - xtrace(SUBCHNL, "trk %d, ind %d\n", - sub->cdsc_trk, sub->cdsc_ind); - /* Always return stuff in MSF, and let the Uniform cdrom driver - worry about what the user actually wants */ - sub->cdsc_absaddr.msf.minute = - bcd2uint(q.dt.minute); - sub->cdsc_absaddr.msf.second = - bcd2uint(q.dt.second); - sub->cdsc_absaddr.msf.frame = bcd2uint(q.dt.frame); - sub->cdsc_reladdr.msf.minute = - bcd2uint(q.tt.minute); - sub->cdsc_reladdr.msf.second = - bcd2uint(q.tt.second); - sub->cdsc_reladdr.msf.frame = bcd2uint(q.tt.frame); - xtrace(SUBCHNL, - "msf: abs %02d:%02d:%02d, rel %02d:%02d:%02d\n", - sub->cdsc_absaddr.msf.minute, - sub->cdsc_absaddr.msf.second, - sub->cdsc_absaddr.msf.frame, - sub->cdsc_reladdr.msf.minute, - sub->cdsc_reladdr.msf.second, - sub->cdsc_reladdr.msf.frame); - - return 0; - } - - case CDROMREADTOCHDR:{ - struct cdrom_tochdr *toc = - (struct cdrom_tochdr *) arg; - - xtrace(IOCTL, "ioctl() READTOCHDR\n"); - toc->cdth_trk0 = stuffp->di.n_first; - toc->cdth_trk1 = stuffp->di.n_last; - xtrace(TOCHDR, - "ioctl() track0 = %d, track1 = %d\n", - stuffp->di.n_first, stuffp->di.n_last); - return 0; - } - - case CDROMPAUSE:{ - xtrace(IOCTL, "ioctl() PAUSE\n"); - if (stuffp->audiostatus != CDROM_AUDIO_PLAY) - return -EINVAL; - if (-1 == mcdx_stop(stuffp, 1)) - return -EIO; - stuffp->audiostatus = CDROM_AUDIO_PAUSED; - if (-1 == - mcdx_requestsubqcode(stuffp, &stuffp->start, - 1)) - return -EIO; - return 0; - } - - case CDROMMULTISESSION:{ - struct cdrom_multisession *ms = - (struct cdrom_multisession *) arg; - xtrace(IOCTL, "ioctl() MULTISESSION\n"); - /* Always return stuff in LBA, and let the Uniform cdrom driver - worry about what the user actually wants */ - ms->addr.lba = msf2log(&stuffp->multi.msf_last); - ms->xa_flag = !!stuffp->multi.multi; - xtrace(MS, - "ioctl() (%d, 0x%08x [%02x:%02x.%02x])\n", - ms->xa_flag, ms->addr.lba, - stuffp->multi.msf_last.minute, - stuffp->multi.msf_last.second, - stuffp->multi.msf_last.frame); - - return 0; - } - - case CDROMEJECT:{ - xtrace(IOCTL, "ioctl() EJECT\n"); - if (stuffp->users > 1) - return -EBUSY; - return (mcdx_tray_move(cdi, 1)); - } - - case CDROMCLOSETRAY:{ - xtrace(IOCTL, "ioctl() CDROMCLOSETRAY\n"); - return (mcdx_tray_move(cdi, 0)); - } - - case CDROMVOLCTRL:{ - struct cdrom_volctrl *volctrl = - (struct cdrom_volctrl *) arg; - xtrace(IOCTL, "ioctl() VOLCTRL\n"); - -#if 0 /* not tested! */ - /* adjust for the weirdness of workman (md) */ - /* can't test it (hs) */ - volctrl.channel2 = volctrl.channel1; - volctrl.channel1 = volctrl.channel3 = 0x00; -#endif - return mcdx_setattentuator(stuffp, volctrl, 2); - } - - default: - return -EINVAL; - } -} - -static void do_mcdx_request(request_queue_t * q) -{ - struct s_drive_stuff *stuffp; - struct request *req; - - again: - - req = elv_next_request(q); - if (!req) - return; - - stuffp = req->rq_disk->private_data; - - if (!stuffp->present) { - xwarn("do_request(): bad device: %s\n",req->rq_disk->disk_name); - xtrace(REQUEST, "end_request(0): bad device\n"); - end_request(req, 0); - return; - } - - if (stuffp->audio) { - xwarn("do_request() attempt to read from audio cd\n"); - xtrace(REQUEST, "end_request(0): read from audio\n"); - end_request(req, 0); - return; - } - - xtrace(REQUEST, "do_request() (%lu + %lu)\n", - req->sector, req->nr_sectors); - - if (req->cmd != READ) { - xwarn("do_request(): non-read command to cd!!\n"); - xtrace(REQUEST, "end_request(0): write\n"); - end_request(req, 0); - return; - } - else { - stuffp->status = 0; - while (req->nr_sectors) { - int i; - - i = mcdx_transfer(stuffp, - req->buffer, - req->sector, - req->nr_sectors); - - if (i == -1) { - end_request(req, 0); - goto again; - } - req->sector += i; - req->nr_sectors -= i; - req->buffer += (i * 512); - } - end_request(req, 1); - goto again; - - xtrace(REQUEST, "end_request(1)\n"); - end_request(req, 1); - } - - goto again; -} - -static int mcdx_open(struct cdrom_device_info *cdi, int purpose) -{ - struct s_drive_stuff *stuffp; - xtrace(OPENCLOSE, "open()\n"); - stuffp = cdi->handle; - if (!stuffp->present) - return -ENXIO; - - /* Make the modules looking used ... (thanx bjorn). - * But we shouldn't forget to decrement the module counter - * on error return */ - - /* this is only done to test if the drive talks with us */ - if (-1 == mcdx_getstatus(stuffp, 1)) - return -EIO; - - if (stuffp->xxx) { - - xtrace(OPENCLOSE, "open() media changed\n"); - stuffp->audiostatus = CDROM_AUDIO_INVALID; - stuffp->readcmd = 0; - xtrace(OPENCLOSE, "open() Request multisession info\n"); - if (-1 == - mcdx_requestmultidiskinfo(stuffp, &stuffp->multi, 6)) - xinfo("No multidiskinfo\n"); - } else { - /* multisession ? */ - if (!stuffp->multi.multi) - stuffp->multi.msf_last.second = 2; - - xtrace(OPENCLOSE, "open() MS: %d, last @ %02x:%02x.%02x\n", - stuffp->multi.multi, - stuffp->multi.msf_last.minute, - stuffp->multi.msf_last.second, - stuffp->multi.msf_last.frame); - - {; - } /* got multisession information */ - /* request the disks table of contents (aka diskinfo) */ - if (-1 == mcdx_requesttocdata(stuffp, &stuffp->di, 1)) { - - stuffp->lastsector = -1; - - } else { - - stuffp->lastsector = (CD_FRAMESIZE / 512) - * msf2log(&stuffp->di.msf_leadout) - 1; - - xtrace(OPENCLOSE, - "open() start %d (%02x:%02x.%02x) %d\n", - stuffp->di.n_first, - stuffp->di.msf_first.minute, - stuffp->di.msf_first.second, - stuffp->di.msf_first.frame, - msf2log(&stuffp->di.msf_first)); - xtrace(OPENCLOSE, - "open() last %d (%02x:%02x.%02x) %d\n", - stuffp->di.n_last, - stuffp->di.msf_leadout.minute, - stuffp->di.msf_leadout.second, - stuffp->di.msf_leadout.frame, - msf2log(&stuffp->di.msf_leadout)); - } - - if (stuffp->toc) { - xtrace(MALLOC, "open() free old toc @ %p\n", - stuffp->toc); - kfree(stuffp->toc); - - stuffp->toc = NULL; - } - - xtrace(OPENCLOSE, "open() init irq generation\n"); - if (-1 == mcdx_config(stuffp, 1)) - return -EIO; -#ifdef FALLBACK - /* Set the read speed */ - xwarn("AAA %x AAA\n", stuffp->readcmd); - if (stuffp->readerrs) - stuffp->readcmd = READ1X; - else - stuffp->readcmd = - stuffp->present | SINGLE ? READ1X : READ2X; - xwarn("XXX %x XXX\n", stuffp->readcmd); -#else - stuffp->readcmd = - stuffp->present | SINGLE ? READ1X : READ2X; -#endif - - /* try to get the first sector, iff any ... */ - if (stuffp->lastsector >= 0) { - char buf[512]; - int ans; - int tries; - - stuffp->xa = 0; - stuffp->audio = 0; - - for (tries = 6; tries; tries--) { - - stuffp->introk = 1; - - xtrace(OPENCLOSE, "open() try as %s\n", - stuffp->xa ? "XA" : "normal"); - /* set data mode */ - if (-1 == (ans = mcdx_setdatamode(stuffp, - stuffp-> - xa ? - MODE2 : - MODE1, - 1))) { - /* return -EIO; */ - stuffp->xa = 0; - break; - } - - if ((stuffp->audio = e_audio(ans))) - break; - - while (0 == - (ans = - mcdx_transfer(stuffp, buf, 0, 1))); - - if (ans == 1) - break; - stuffp->xa = !stuffp->xa; - } - } - /* xa disks will be read in raw mode, others not */ - if (-1 == mcdx_setdrivemode(stuffp, - stuffp->xa ? RAW : COOKED, - 1)) - return -EIO; - if (stuffp->audio) { - xinfo("open() audio disk found\n"); - } else if (stuffp->lastsector >= 0) { - xinfo("open() %s%s disk found\n", - stuffp->xa ? "XA / " : "", - stuffp->multi. - multi ? "Multi Session" : "Single Session"); - } - } - stuffp->xxx = 0; - stuffp->users++; - return 0; -} - -static void mcdx_close(struct cdrom_device_info *cdi) -{ - struct s_drive_stuff *stuffp; - - xtrace(OPENCLOSE, "close()\n"); - - stuffp = cdi->handle; - - --stuffp->users; -} - -static int mcdx_media_changed(struct cdrom_device_info *cdi, int disc_nr) -/* Return: 1 if media changed since last call to this function - 0 otherwise */ -{ - struct s_drive_stuff *stuffp; - - xinfo("mcdx_media_changed called for device %s\n", cdi->name); - - stuffp = cdi->handle; - mcdx_getstatus(stuffp, 1); - - if (stuffp->yyy == 0) - return 0; - - stuffp->yyy = 0; - return 1; -} - -#ifndef MODULE -static int __init mcdx_setup(char *str) -{ - int pi[4]; - (void) get_options(str, ARRAY_SIZE(pi), pi); - - if (pi[0] > 0) - mcdx_drive_map[0][0] = pi[1]; - if (pi[0] > 1) - mcdx_drive_map[0][1] = pi[2]; - return 1; -} - -__setup("mcdx=", mcdx_setup); - -#endif - -/* DIRTY PART ******************************************************/ - -static void mcdx_delay(struct s_drive_stuff *stuff, long jifs) -/* This routine is used for sleeping. - * A jifs value <0 means NO sleeping, - * =0 means minimal sleeping (let the kernel - * run for other processes) - * >0 means at least sleep for that amount. - * May be we could use a simple count loop w/ jumps to itself, but - * I wanna make this independent of cpu speed. [1 jiffy is 1/HZ] sec */ -{ - if (jifs < 0) - return; - - xtrace(SLEEP, "*** delay: sleepq\n"); - interruptible_sleep_on_timeout(&stuff->sleepq, jifs); - xtrace(SLEEP, "delay awoken\n"); - if (signal_pending(current)) { - xtrace(SLEEP, "got signal\n"); - } -} - -static irqreturn_t mcdx_intr(int irq, void *dev_id) -{ - struct s_drive_stuff *stuffp = dev_id; - unsigned char b; - -#ifdef AK2 - if (!stuffp->busy && stuffp->pending) - stuffp->int_err = 1; - -#endif /* AK2 */ - /* get the interrupt status */ - b = inb(stuffp->rreg_status); - stuffp->introk = ~b & MCDX_RBIT_DTEN; - - /* NOTE: We only should get interrupts if the data we - * requested are ready to transfer. - * But the drive seems to generate ``asynchronous'' interrupts - * on several error conditions too. (Despite the err int enable - * setting during initialisation) */ - - /* if not ok, read the next byte as the drives status */ - if (!stuffp->introk) { - xtrace(IRQ, "intr() irq %d hw status 0x%02x\n", irq, b); - if (~b & MCDX_RBIT_STEN) { - xinfo("intr() irq %d status 0x%02x\n", - irq, inb(stuffp->rreg_data)); - } else { - xinfo("intr() irq %d ambiguous hw status\n", irq); - } - } else { - xtrace(IRQ, "irq() irq %d ok, status %02x\n", irq, b); - } - - stuffp->busy = 0; - wake_up_interruptible(&stuffp->busyq); - return IRQ_HANDLED; -} - - -static int mcdx_talk(struct s_drive_stuff *stuffp, - const unsigned char *cmd, size_t cmdlen, - void *buffer, size_t size, unsigned int timeout, int tries) -/* Send a command to the drive, wait for the result. - * returns -1 on timeout, drive status otherwise - * If buffer is not zero, the result (length size) is stored there. - * If buffer is zero the size should be the number of bytes to read - * from the drive. These bytes are discarded. - */ -{ - int st; - char c; - int discard; - - /* Somebody wants the data read? */ - if ((discard = (buffer == NULL))) - buffer = &c; - - while (stuffp->lock) { - xtrace(SLEEP, "*** talk: lockq\n"); - interruptible_sleep_on(&stuffp->lockq); - xtrace(SLEEP, "talk: awoken\n"); - } - - stuffp->lock = 1; - - /* An operation other then reading data destroys the - * data already requested and remembered in stuffp->request, ... */ - stuffp->valid = 0; - -#if MCDX_DEBUG & TALK - { - unsigned char i; - xtrace(TALK, - "talk() %d / %d tries, res.size %d, command 0x%02x", - tries, timeout, size, (unsigned char) cmd[0]); - for (i = 1; i < cmdlen; i++) - xtrace(TALK, " 0x%02x", cmd[i]); - xtrace(TALK, "\n"); - } -#endif - - /* give up if all tries are done (bad) or if the status - * st != -1 (good) */ - for (st = -1; st == -1 && tries; tries--) { - - char *bp = (char *) buffer; - size_t sz = size; - - outsb(stuffp->wreg_data, cmd, cmdlen); - xtrace(TALK, "talk() command sent\n"); - - /* get the status byte */ - if (-1 == mcdx_getval(stuffp, timeout, 0, bp)) { - xinfo("talk() %02x timed out (status), %d tr%s left\n", - cmd[0], tries - 1, tries == 2 ? "y" : "ies"); - continue; - } - st = *bp; - sz--; - if (!discard) - bp++; - - xtrace(TALK, "talk() got status 0x%02x\n", st); - - /* command error? */ - if (e_cmderr(st)) { - xwarn("command error cmd = %02x %s \n", - cmd[0], cmdlen > 1 ? "..." : ""); - st = -1; - continue; - } - - /* audio status? */ - if (stuffp->audiostatus == CDROM_AUDIO_INVALID) - stuffp->audiostatus = - e_audiobusy(st) ? CDROM_AUDIO_PLAY : - CDROM_AUDIO_NO_STATUS; - else if (stuffp->audiostatus == CDROM_AUDIO_PLAY - && e_audiobusy(st) == 0) - stuffp->audiostatus = CDROM_AUDIO_COMPLETED; - - /* media change? */ - if (e_changed(st)) { - xinfo("talk() media changed\n"); - stuffp->xxx = stuffp->yyy = 1; - } - - /* now actually get the data */ - while (sz--) { - if (-1 == mcdx_getval(stuffp, timeout, 0, bp)) { - xinfo("talk() %02x timed out (data), %d tr%s left\n", - cmd[0], tries - 1, - tries == 2 ? "y" : "ies"); - st = -1; - break; - } - if (!discard) - bp++; - xtrace(TALK, "talk() got 0x%02x\n", *(bp - 1)); - } - } - -#if !MCDX_QUIET - if (!tries && st == -1) - xinfo("talk() giving up\n"); -#endif - - stuffp->lock = 0; - wake_up_interruptible(&stuffp->lockq); - - xtrace(TALK, "talk() done with 0x%02x\n", st); - return st; -} - -/* MODULE STUFF ***********************************************************/ - -static int __init __mcdx_init(void) -{ - int i; - int drives = 0; - - mcdx_init(); - for (i = 0; i < MCDX_NDRIVES; i++) { - if (mcdx_stuffp[i]) { - xtrace(INIT, "init_module() drive %d stuff @ %p\n", - i, mcdx_stuffp[i]); - drives++; - } - } - - if (!drives) - return -EIO; - - return 0; -} - -static void __exit mcdx_exit(void) -{ - int i; - - xinfo("cleanup_module called\n"); - - for (i = 0; i < MCDX_NDRIVES; i++) { - struct s_drive_stuff *stuffp = mcdx_stuffp[i]; - if (!stuffp) - continue; - del_gendisk(stuffp->disk); - if (unregister_cdrom(&stuffp->info)) { - printk(KERN_WARNING "Can't unregister cdrom mcdx\n"); - continue; - } - put_disk(stuffp->disk); - release_region(stuffp->wreg_data, MCDX_IO_SIZE); - free_irq(stuffp->irq, NULL); - if (stuffp->toc) { - xtrace(MALLOC, "cleanup_module() free toc @ %p\n", - stuffp->toc); - kfree(stuffp->toc); - } - xtrace(MALLOC, "cleanup_module() free stuffp @ %p\n", - stuffp); - mcdx_stuffp[i] = NULL; - kfree(stuffp); - } - - if (unregister_blkdev(MAJOR_NR, "mcdx") != 0) { - xwarn("cleanup() unregister_blkdev() failed\n"); - } -#if !MCDX_QUIET - else - xinfo("cleanup() succeeded\n"); -#endif - blk_cleanup_queue(mcdx_queue); -} - -#ifdef MODULE -module_init(__mcdx_init); -#endif -module_exit(mcdx_exit); - - -/* Support functions ************************************************/ - -static int __init mcdx_init_drive(int drive) -{ - struct s_version version; - struct gendisk *disk; - struct s_drive_stuff *stuffp; - int size = sizeof(*stuffp); - char msg[80]; - - xtrace(INIT, "init() try drive %d\n", drive); - - xtrace(INIT, "kmalloc space for stuffpt's\n"); - xtrace(MALLOC, "init() malloc %d bytes\n", size); - if (!(stuffp = kzalloc(size, GFP_KERNEL))) { - xwarn("init() malloc failed\n"); - return 1; - } - - disk = alloc_disk(1); - if (!disk) { - xwarn("init() malloc failed\n"); - kfree(stuffp); - return 1; - } - - xtrace(INIT, "init() got %d bytes for drive stuff @ %p\n", - sizeof(*stuffp), stuffp); - - /* set default values */ - stuffp->present = 0; /* this should be 0 already */ - stuffp->toc = NULL; /* this should be NULL already */ - - /* setup our irq and i/o addresses */ - stuffp->irq = irq(mcdx_drive_map[drive]); - stuffp->wreg_data = stuffp->rreg_data = port(mcdx_drive_map[drive]); - stuffp->wreg_reset = stuffp->rreg_status = stuffp->wreg_data + 1; - stuffp->wreg_hcon = stuffp->wreg_reset + 1; - stuffp->wreg_chn = stuffp->wreg_hcon + 1; - - init_waitqueue_head(&stuffp->busyq); - init_waitqueue_head(&stuffp->lockq); - init_waitqueue_head(&stuffp->sleepq); - - /* check if i/o addresses are available */ - if (!request_region(stuffp->wreg_data, MCDX_IO_SIZE, "mcdx")) { - xwarn("0x%03x,%d: Init failed. " - "I/O ports (0x%03x..0x%03x) already in use.\n", - stuffp->wreg_data, stuffp->irq, - stuffp->wreg_data, - stuffp->wreg_data + MCDX_IO_SIZE - 1); - xtrace(MALLOC, "init() free stuffp @ %p\n", stuffp); - kfree(stuffp); - put_disk(disk); - xtrace(INIT, "init() continue at next drive\n"); - return 0; /* next drive */ - } - - xtrace(INIT, "init() i/o port is available at 0x%03x\n" - stuffp->wreg_data); - xtrace(INIT, "init() hardware reset\n"); - mcdx_reset(stuffp, HARD, 1); - - xtrace(INIT, "init() get version\n"); - if (-1 == mcdx_requestversion(stuffp, &version, 4)) { - /* failed, next drive */ - release_region(stuffp->wreg_data, MCDX_IO_SIZE); - xwarn("%s=0x%03x,%d: Init failed. Can't get version.\n", - MCDX, stuffp->wreg_data, stuffp->irq); - xtrace(MALLOC, "init() free stuffp @ %p\n", stuffp); - kfree(stuffp); - put_disk(disk); - xtrace(INIT, "init() continue at next drive\n"); - return 0; - } - - switch (version.code) { - case 'D': - stuffp->readcmd = READ2X; - stuffp->present = DOUBLE | DOOR | MULTI; - break; - case 'F': - stuffp->readcmd = READ1X; - stuffp->present = SINGLE | DOOR | MULTI; - break; - case 'M': - stuffp->readcmd = READ1X; - stuffp->present = SINGLE; - break; - default: - stuffp->present = 0; - break; - } - - stuffp->playcmd = READ1X; - - if (!stuffp->present) { - release_region(stuffp->wreg_data, MCDX_IO_SIZE); - xwarn("%s=0x%03x,%d: Init failed. No Mitsumi CD-ROM?.\n", - MCDX, stuffp->wreg_data, stuffp->irq); - kfree(stuffp); - put_disk(disk); - return 0; /* next drive */ - } - - xtrace(INIT, "init() register blkdev\n"); - if (register_blkdev(MAJOR_NR, "mcdx")) { - release_region(stuffp->wreg_data, MCDX_IO_SIZE); - kfree(stuffp); - put_disk(disk); - return 1; - } - - mcdx_queue = blk_init_queue(do_mcdx_request, &mcdx_lock); - if (!mcdx_queue) { - unregister_blkdev(MAJOR_NR, "mcdx"); - release_region(stuffp->wreg_data, MCDX_IO_SIZE); - kfree(stuffp); - put_disk(disk); - return 1; - } - - xtrace(INIT, "init() subscribe irq and i/o\n"); - if (request_irq(stuffp->irq, mcdx_intr, IRQF_DISABLED, "mcdx", stuffp)) { - release_region(stuffp->wreg_data, MCDX_IO_SIZE); - xwarn("%s=0x%03x,%d: Init failed. Can't get irq (%d).\n", - MCDX, stuffp->wreg_data, stuffp->irq, stuffp->irq); - stuffp->irq = 0; - blk_cleanup_queue(mcdx_queue); - kfree(stuffp); - put_disk(disk); - return 0; - } - - xtrace(INIT, "init() get garbage\n"); - { - int i; - mcdx_delay(stuffp, HZ / 2); - for (i = 100; i; i--) - (void) inb(stuffp->rreg_status); - } - - -#ifdef WE_KNOW_WHY - /* irq 11 -> channel register */ - outb(0x50, stuffp->wreg_chn); -#endif - - xtrace(INIT, "init() set non dma but irq mode\n"); - mcdx_config(stuffp, 1); - - stuffp->info.ops = &mcdx_dops; - stuffp->info.speed = 2; - stuffp->info.capacity = 1; - stuffp->info.handle = stuffp; - sprintf(stuffp->info.name, "mcdx%d", drive); - disk->major = MAJOR_NR; - disk->first_minor = drive; - strcpy(disk->disk_name, stuffp->info.name); - disk->fops = &mcdx_bdops; - disk->flags = GENHD_FL_CD; - stuffp->disk = disk; - - sprintf(msg, " mcdx: Mitsumi CD-ROM installed at 0x%03x, irq %d." - " (Firmware version %c %x)\n", - stuffp->wreg_data, stuffp->irq, version.code, version.ver); - mcdx_stuffp[drive] = stuffp; - xtrace(INIT, "init() mcdx_stuffp[%d] = %p\n", drive, stuffp); - if (register_cdrom(&stuffp->info) != 0) { - printk("Cannot register Mitsumi CD-ROM!\n"); - free_irq(stuffp->irq, NULL); - release_region(stuffp->wreg_data, MCDX_IO_SIZE); - kfree(stuffp); - put_disk(disk); - if (unregister_blkdev(MAJOR_NR, "mcdx") != 0) - xwarn("cleanup() unregister_blkdev() failed\n"); - blk_cleanup_queue(mcdx_queue); - return 2; - } - disk->private_data = stuffp; - disk->queue = mcdx_queue; - add_disk(disk); - printk(msg); - return 0; -} - -static int __init mcdx_init(void) -{ - int drive; - xwarn("Version 2.14(hs) \n"); - - xwarn("$Id: mcdx.c,v 1.21 1997/01/26 07:12:59 davem Exp $\n"); - - /* zero the pointer array */ - for (drive = 0; drive < MCDX_NDRIVES; drive++) - mcdx_stuffp[drive] = NULL; - - /* do the initialisation */ - for (drive = 0; drive < MCDX_NDRIVES; drive++) { - switch (mcdx_init_drive(drive)) { - case 2: - return -EIO; - case 1: - break; - } - } - return 0; -} - -static int mcdx_transfer(struct s_drive_stuff *stuffp, - char *p, int sector, int nr_sectors) -/* This seems to do the actually transfer. But it does more. It - keeps track of errors occurred and will (if possible) fall back - to single speed on error. - Return: -1 on timeout or other error - else status byte (as in stuff->st) */ -{ - int ans; - - ans = mcdx_xfer(stuffp, p, sector, nr_sectors); - return ans; -#ifdef FALLBACK - if (-1 == ans) - stuffp->readerrs++; - else - return ans; - - if (stuffp->readerrs && stuffp->readcmd == READ1X) { - xwarn("XXX Already reading 1x -- no chance\n"); - return -1; - } - - xwarn("XXX Fallback to 1x\n"); - - stuffp->readcmd = READ1X; - return mcdx_transfer(stuffp, p, sector, nr_sectors); -#endif - -} - - -static int mcdx_xfer(struct s_drive_stuff *stuffp, - char *p, int sector, int nr_sectors) -/* This does actually the transfer from the drive. - Return: -1 on timeout or other error - else status byte (as in stuff->st) */ -{ - int border; - int done = 0; - long timeout; - - if (stuffp->audio) { - xwarn("Attempt to read from audio CD.\n"); - return -1; - } - - if (!stuffp->readcmd) { - xinfo("Can't transfer from missing disk.\n"); - return -1; - } - - while (stuffp->lock) { - interruptible_sleep_on(&stuffp->lockq); - } - - if (stuffp->valid && (sector >= stuffp->pending) - && (sector < stuffp->low_border)) { - - /* All (or at least a part of the sectors requested) seems - * to be already requested, so we don't need to bother the - * drive with new requests ... - * Wait for the drive become idle, but first - * check for possible occurred errors --- the drive - * seems to report them asynchronously */ - - - border = stuffp->high_border < (border = - sector + nr_sectors) - ? stuffp->high_border : border; - - stuffp->lock = current->pid; - - do { - - while (stuffp->busy) { - - timeout = - interruptible_sleep_on_timeout - (&stuffp->busyq, 5 * HZ); - - if (!stuffp->introk) { - xtrace(XFER, - "error via interrupt\n"); - } else if (!timeout) { - xtrace(XFER, "timeout\n"); - } else if (signal_pending(current)) { - xtrace(XFER, "signal\n"); - } else - continue; - - stuffp->lock = 0; - stuffp->busy = 0; - stuffp->valid = 0; - - wake_up_interruptible(&stuffp->lockq); - xtrace(XFER, "transfer() done (-1)\n"); - return -1; - } - - /* check if we need to set the busy flag (as we - * expect an interrupt */ - stuffp->busy = (3 == (stuffp->pending & 3)); - - /* Test if it's the first sector of a block, - * there we have to skip some bytes as we read raw data */ - if (stuffp->xa && (0 == (stuffp->pending & 3))) { - const int HEAD = - CD_FRAMESIZE_RAW - CD_XA_TAIL - - CD_FRAMESIZE; - insb(stuffp->rreg_data, p, HEAD); - } - - /* now actually read the data */ - insb(stuffp->rreg_data, p, 512); - - /* test if it's the last sector of a block, - * if so, we have to handle XA special */ - if ((3 == (stuffp->pending & 3)) && stuffp->xa) { - char dummy[CD_XA_TAIL]; - insb(stuffp->rreg_data, &dummy[0], CD_XA_TAIL); - } - - if (stuffp->pending == sector) { - p += 512; - done++; - sector++; - } - } while (++(stuffp->pending) < border); - - stuffp->lock = 0; - wake_up_interruptible(&stuffp->lockq); - - } else { - - /* The requested sector(s) is/are out of the - * already requested range, so we have to bother the drive - * with a new request. */ - - static unsigned char cmd[] = { - 0, - 0, 0, 0, - 0, 0, 0 - }; - - cmd[0] = stuffp->readcmd; - - /* The numbers held in ->pending, ..., should be valid */ - stuffp->valid = 1; - stuffp->pending = sector & ~3; - - /* do some sanity checks */ - if (stuffp->pending > stuffp->lastsector) { - xwarn - ("transfer() sector %d from nirvana requested.\n", - stuffp->pending); - stuffp->status = MCDX_ST_EOM; - stuffp->valid = 0; - xtrace(XFER, "transfer() done (-1)\n"); - return -1; - } - - if ((stuffp->low_border = stuffp->pending + DIRECT_SIZE) - > stuffp->lastsector + 1) { - xtrace(XFER, "cut low_border\n"); - stuffp->low_border = stuffp->lastsector + 1; - } - if ((stuffp->high_border = stuffp->pending + REQUEST_SIZE) - > stuffp->lastsector + 1) { - xtrace(XFER, "cut high_border\n"); - stuffp->high_border = stuffp->lastsector + 1; - } - - { /* Convert the sector to be requested to MSF format */ - struct cdrom_msf0 pending; - log2msf(stuffp->pending / 4, &pending); - cmd[1] = pending.minute; - cmd[2] = pending.second; - cmd[3] = pending.frame; - } - - cmd[6] = - (unsigned - char) ((stuffp->high_border - stuffp->pending) / 4); - xtrace(XFER, "[%2d]\n", cmd[6]); - - stuffp->busy = 1; - /* Now really issue the request command */ - outsb(stuffp->wreg_data, cmd, sizeof cmd); - - } -#ifdef AK2 - if (stuffp->int_err) { - stuffp->valid = 0; - stuffp->int_err = 0; - return -1; - } -#endif /* AK2 */ - - stuffp->low_border = (stuffp->low_border += - done) < - stuffp->high_border ? stuffp->low_border : stuffp->high_border; - - return done; -} - - -/* Access to elements of the mcdx_drive_map members */ - -static unsigned port(int *ip) -{ - return ip[0]; -} -static int irq(int *ip) -{ - return ip[1]; -} - -/* Misc number converters */ - -static unsigned int bcd2uint(unsigned char c) -{ - return (c >> 4) * 10 + (c & 0x0f); -} - -static unsigned int uint2bcd(unsigned int ival) -{ - return ((ival / 10) << 4) | (ival % 10); -} - -static void log2msf(unsigned int l, struct cdrom_msf0 *pmsf) -{ - l += CD_MSF_OFFSET; - pmsf->minute = uint2bcd(l / 4500), l %= 4500; - pmsf->second = uint2bcd(l / 75); - pmsf->frame = uint2bcd(l % 75); -} - -static unsigned int msf2log(const struct cdrom_msf0 *pmsf) -{ - return bcd2uint(pmsf->frame) - + bcd2uint(pmsf->second) * 75 - + bcd2uint(pmsf->minute) * 4500 - CD_MSF_OFFSET; -} - -int mcdx_readtoc(struct s_drive_stuff *stuffp) -/* Read the toc entries from the CD, - * Return: -1 on failure, else 0 */ -{ - - if (stuffp->toc) { - xtrace(READTOC, "ioctl() toc already read\n"); - return 0; - } - - xtrace(READTOC, "ioctl() readtoc for %d tracks\n", - stuffp->di.n_last - stuffp->di.n_first + 1); - - if (-1 == mcdx_hold(stuffp, 1)) - return -1; - - xtrace(READTOC, "ioctl() tocmode\n"); - if (-1 == mcdx_setdrivemode(stuffp, TOC, 1)) - return -EIO; - - /* all seems to be ok so far ... malloc */ - { - int size; - size = - sizeof(struct s_subqcode) * (stuffp->di.n_last - - stuffp->di.n_first + 2); - - xtrace(MALLOC, "ioctl() malloc %d bytes\n", size); - stuffp->toc = kmalloc(size, GFP_KERNEL); - if (!stuffp->toc) { - xwarn("Cannot malloc %d bytes for toc\n", size); - mcdx_setdrivemode(stuffp, DATA, 1); - return -EIO; - } - } - - /* now read actually the index */ - { - int trk; - int retries; - - for (trk = 0; - trk < (stuffp->di.n_last - stuffp->di.n_first + 1); - trk++) - stuffp->toc[trk].index = 0; - - for (retries = 300; retries; retries--) { /* why 300? */ - struct s_subqcode q; - unsigned int idx; - - if (-1 == mcdx_requestsubqcode(stuffp, &q, 1)) { - mcdx_setdrivemode(stuffp, DATA, 1); - return -EIO; - } - - idx = bcd2uint(q.index); - - if ((idx > 0) - && (idx <= stuffp->di.n_last) - && (q.tno == 0) - && (stuffp->toc[idx - stuffp->di.n_first]. - index == 0)) { - stuffp->toc[idx - stuffp->di.n_first] = q; - xtrace(READTOC, - "ioctl() toc idx %d (trk %d)\n", - idx, trk); - trk--; - } - if (trk == 0) - break; - } - memset(&stuffp-> - toc[stuffp->di.n_last - stuffp->di.n_first + 1], 0, - sizeof(stuffp->toc[0])); - stuffp->toc[stuffp->di.n_last - stuffp->di.n_first + - 1].dt = stuffp->di.msf_leadout; - } - - /* unset toc mode */ - xtrace(READTOC, "ioctl() undo toc mode\n"); - if (-1 == mcdx_setdrivemode(stuffp, DATA, 2)) - return -EIO; - -#if MCDX_DEBUG && READTOC - { - int trk; - for (trk = 0; - trk < (stuffp->di.n_last - stuffp->di.n_first + 2); - trk++) - xtrace(READTOC, "ioctl() %d readtoc %02x %02x %02x" - " %02x:%02x.%02x %02x:%02x.%02x\n", - trk + stuffp->di.n_first, - stuffp->toc[trk].control, - stuffp->toc[trk].tno, - stuffp->toc[trk].index, - stuffp->toc[trk].tt.minute, - stuffp->toc[trk].tt.second, - stuffp->toc[trk].tt.frame, - stuffp->toc[trk].dt.minute, - stuffp->toc[trk].dt.second, - stuffp->toc[trk].dt.frame); - } -#endif - - return 0; -} - -static int -mcdx_playmsf(struct s_drive_stuff *stuffp, const struct cdrom_msf *msf) -{ - unsigned char cmd[7] = { - 0, 0, 0, 0, 0, 0, 0 - }; - - if (!stuffp->readcmd) { - xinfo("Can't play from missing disk.\n"); - return -1; - } - - cmd[0] = stuffp->playcmd; - - cmd[1] = msf->cdmsf_min0; - cmd[2] = msf->cdmsf_sec0; - cmd[3] = msf->cdmsf_frame0; - cmd[4] = msf->cdmsf_min1; - cmd[5] = msf->cdmsf_sec1; - cmd[6] = msf->cdmsf_frame1; - - xtrace(PLAYMSF, "ioctl(): play %x " - "%02x:%02x:%02x -- %02x:%02x:%02x\n", - cmd[0], cmd[1], cmd[2], cmd[3], cmd[4], cmd[5], cmd[6]); - - outsb(stuffp->wreg_data, cmd, sizeof cmd); - - if (-1 == mcdx_getval(stuffp, 3 * HZ, 0, NULL)) { - xwarn("playmsf() timeout\n"); - return -1; - } - - stuffp->audiostatus = CDROM_AUDIO_PLAY; - return 0; -} - -static int -mcdx_playtrk(struct s_drive_stuff *stuffp, const struct cdrom_ti *ti) -{ - struct s_subqcode *p; - struct cdrom_msf msf; - - if (-1 == mcdx_readtoc(stuffp)) - return -1; - - if (ti) - p = &stuffp->toc[ti->cdti_trk0 - stuffp->di.n_first]; - else - p = &stuffp->start; - - msf.cdmsf_min0 = p->dt.minute; - msf.cdmsf_sec0 = p->dt.second; - msf.cdmsf_frame0 = p->dt.frame; - - if (ti) { - p = &stuffp->toc[ti->cdti_trk1 - stuffp->di.n_first + 1]; - stuffp->stop = *p; - } else - p = &stuffp->stop; - - msf.cdmsf_min1 = p->dt.minute; - msf.cdmsf_sec1 = p->dt.second; - msf.cdmsf_frame1 = p->dt.frame; - - return mcdx_playmsf(stuffp, &msf); -} - - -/* Drive functions ************************************************/ - -static int mcdx_tray_move(struct cdrom_device_info *cdi, int position) -{ - struct s_drive_stuff *stuffp = cdi->handle; - - if (!stuffp->present) - return -ENXIO; - if (!(stuffp->present & DOOR)) - return -ENOSYS; - - if (position) /* 1: eject */ - return mcdx_talk(stuffp, "\xf6", 1, NULL, 1, 5 * HZ, 3); - else /* 0: close */ - return mcdx_talk(stuffp, "\xf8", 1, NULL, 1, 5 * HZ, 3); - return 1; -} - -static int mcdx_stop(struct s_drive_stuff *stuffp, int tries) -{ - return mcdx_talk(stuffp, "\xf0", 1, NULL, 1, 2 * HZ, tries); -} - -static int mcdx_hold(struct s_drive_stuff *stuffp, int tries) -{ - return mcdx_talk(stuffp, "\x70", 1, NULL, 1, 2 * HZ, tries); -} - -static int mcdx_requestsubqcode(struct s_drive_stuff *stuffp, - struct s_subqcode *sub, int tries) -{ - char buf[11]; - int ans; - - if (-1 == (ans = mcdx_talk(stuffp, "\x20", 1, buf, sizeof(buf), - 2 * HZ, tries))) - return -1; - sub->control = buf[1]; - sub->tno = buf[2]; - sub->index = buf[3]; - sub->tt.minute = buf[4]; - sub->tt.second = buf[5]; - sub->tt.frame = buf[6]; - sub->dt.minute = buf[8]; - sub->dt.second = buf[9]; - sub->dt.frame = buf[10]; - - return ans; -} - -static int mcdx_requestmultidiskinfo(struct s_drive_stuff *stuffp, - struct s_multi *multi, int tries) -{ - char buf[5]; - int ans; - - if (stuffp->present & MULTI) { - ans = - mcdx_talk(stuffp, "\x11", 1, buf, sizeof(buf), 2 * HZ, - tries); - multi->multi = buf[1]; - multi->msf_last.minute = buf[2]; - multi->msf_last.second = buf[3]; - multi->msf_last.frame = buf[4]; - return ans; - } else { - multi->multi = 0; - return 0; - } -} - -static int mcdx_requesttocdata(struct s_drive_stuff *stuffp, struct s_diskinfo *info, - int tries) -{ - char buf[9]; - int ans; - ans = - mcdx_talk(stuffp, "\x10", 1, buf, sizeof(buf), 2 * HZ, tries); - if (ans == -1) { - info->n_first = 0; - info->n_last = 0; - } else { - info->n_first = bcd2uint(buf[1]); - info->n_last = bcd2uint(buf[2]); - info->msf_leadout.minute = buf[3]; - info->msf_leadout.second = buf[4]; - info->msf_leadout.frame = buf[5]; - info->msf_first.minute = buf[6]; - info->msf_first.second = buf[7]; - info->msf_first.frame = buf[8]; - } - return ans; -} - -static int mcdx_setdrivemode(struct s_drive_stuff *stuffp, enum drivemodes mode, - int tries) -{ - char cmd[2]; - int ans; - - xtrace(HW, "setdrivemode() %d\n", mode); - - if (-1 == (ans = mcdx_talk(stuffp, "\xc2", 1, cmd, sizeof(cmd), 5 * HZ, tries))) - return -1; - - switch (mode) { - case TOC: - cmd[1] |= 0x04; - break; - case DATA: - cmd[1] &= ~0x04; - break; - case RAW: - cmd[1] |= 0x40; - break; - case COOKED: - cmd[1] &= ~0x40; - break; - default: - break; - } - cmd[0] = 0x50; - return mcdx_talk(stuffp, cmd, 2, NULL, 1, 5 * HZ, tries); -} - -static int mcdx_setdatamode(struct s_drive_stuff *stuffp, enum datamodes mode, - int tries) -{ - unsigned char cmd[2] = { 0xa0 }; - xtrace(HW, "setdatamode() %d\n", mode); - switch (mode) { - case MODE0: - cmd[1] = 0x00; - break; - case MODE1: - cmd[1] = 0x01; - break; - case MODE2: - cmd[1] = 0x02; - break; - default: - return -EINVAL; - } - return mcdx_talk(stuffp, cmd, 2, NULL, 1, 5 * HZ, tries); -} - -static int mcdx_config(struct s_drive_stuff *stuffp, int tries) -{ - char cmd[4]; - - xtrace(HW, "config()\n"); - - cmd[0] = 0x90; - - cmd[1] = 0x10; /* irq enable */ - cmd[2] = 0x05; /* pre, err irq enable */ - - if (-1 == mcdx_talk(stuffp, cmd, 3, NULL, 1, 1 * HZ, tries)) - return -1; - - cmd[1] = 0x02; /* dma select */ - cmd[2] = 0x00; /* no dma */ - - return mcdx_talk(stuffp, cmd, 3, NULL, 1, 1 * HZ, tries); -} - -static int mcdx_requestversion(struct s_drive_stuff *stuffp, struct s_version *ver, - int tries) -{ - char buf[3]; - int ans; - - if (-1 == (ans = mcdx_talk(stuffp, "\xdc", - 1, buf, sizeof(buf), 2 * HZ, tries))) - return ans; - - ver->code = buf[1]; - ver->ver = buf[2]; - - return ans; -} - -static int mcdx_reset(struct s_drive_stuff *stuffp, enum resetmodes mode, int tries) -{ - if (mode == HARD) { - outb(0, stuffp->wreg_chn); /* no dma, no irq -> hardware */ - outb(0, stuffp->wreg_reset); /* hw reset */ - return 0; - } else - return mcdx_talk(stuffp, "\x60", 1, NULL, 1, 5 * HZ, tries); -} - -static int mcdx_lockdoor(struct cdrom_device_info *cdi, int lock) -{ - struct s_drive_stuff *stuffp = cdi->handle; - char cmd[2] = { 0xfe }; - - if (!(stuffp->present & DOOR)) - return -ENOSYS; - if (stuffp->present & DOOR) { - cmd[1] = lock ? 0x01 : 0x00; - return mcdx_talk(stuffp, cmd, sizeof(cmd), NULL, 1, 5 * HZ, 3); - } else - return 0; -} - -static int mcdx_getstatus(struct s_drive_stuff *stuffp, int tries) -{ - return mcdx_talk(stuffp, "\x40", 1, NULL, 1, 5 * HZ, tries); -} - -static int -mcdx_getval(struct s_drive_stuff *stuffp, int to, int delay, char *buf) -{ - unsigned long timeout = to + jiffies; - char c; - - if (!buf) - buf = &c; - - while (inb(stuffp->rreg_status) & MCDX_RBIT_STEN) { - if (time_after(jiffies, timeout)) - return -1; - mcdx_delay(stuffp, delay); - } - - *buf = (unsigned char) inb(stuffp->rreg_data) & 0xff; - - return 0; -} - -static int mcdx_setattentuator(struct s_drive_stuff *stuffp, - struct cdrom_volctrl *vol, int tries) -{ - char cmd[5]; - cmd[0] = 0xae; - cmd[1] = vol->channel0; - cmd[2] = 0; - cmd[3] = vol->channel1; - cmd[4] = 0; - - return mcdx_talk(stuffp, cmd, sizeof(cmd), NULL, 5, 200, tries); -} - -MODULE_LICENSE("GPL"); -MODULE_ALIAS_BLOCKDEV_MAJOR(MITSUMI_X_CDROM_MAJOR); diff --git a/drivers/cdrom/mcdx.h b/drivers/cdrom/mcdx.h deleted file mode 100644 index 83c364a74dc..00000000000 --- a/drivers/cdrom/mcdx.h +++ /dev/null @@ -1,185 +0,0 @@ -/* - * Definitions for the Mitsumi CDROM interface - * Copyright (C) 1995 1996 Heiko Schlittermann <heiko@lotte.sax.de> - * VERSION: @VERSION@ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, write to - * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Thanks to - * The Linux Community at all and ... - * Martin Harris (he wrote the first Mitsumi Driver) - * Eberhard Moenkeberg (he gave me much support and the initial kick) - * Bernd Huebner, Ruediger Helsch (Unifix-Software Gmbh, they - * improved the original driver) - * Jon Tombs, Bjorn Ekwall (module support) - * Daniel v. Mosnenck (he sent me the Technical and Programming Reference) - * Gerd Knorr (he lent me his PhotoCD) - * Nils Faerber and Roger E. Wolff (extensively tested the LU portion) - * Andreas Kies (testing the mysterious hang up's) - * ... somebody forgotten? - * Marcin Dalecki - * - */ - -/* - * The following lines are for user configuration - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * {0|1} -- 1 if you want the driver detect your drive, may crash and - * needs a long time to seek. The higher the address the longer the - * seek. - * - * WARNING: AUTOPROBE doesn't work. - */ -#define MCDX_AUTOPROBE 0 - -/* - * Drive specific settings according to the jumpers on the controller - * board(s). - * o MCDX_NDRIVES : number of used entries of the following table - * o MCDX_DRIVEMAP : table of {i/o base, irq} per controller - * - * NOTE: I didn't get a drive at irq 9(2) working. Not even alone. - */ -#if MCDX_AUTOPROBE == 0 - #define MCDX_NDRIVES 1 - #define MCDX_DRIVEMAP { \ - {0x300, 11}, \ - {0x304, 05}, \ - {0x000, 00}, \ - {0x000, 00}, \ - {0x000, 00}, \ - } -#else - #error Autoprobing is not implemented yet. -#endif - -#ifndef MCDX_QUIET -#define MCDX_QUIET 1 -#endif - -#ifndef MCDX_DEBUG -#define MCDX_DEBUG 0 -#endif - -/* *** make the following line uncommented, if you're sure, - * *** all configuration is done */ -/* #define I_WAS_HERE */ - -/* The name of the device */ -#define MCDX "mcdx" - -/* Flags for DEBUGGING */ -#define INIT 0 -#define MALLOC 0 -#define IOCTL 0 -#define PLAYTRK 0 -#define SUBCHNL 0 -#define TOCHDR 0 -#define MS 0 -#define PLAYMSF 0 -#define READTOC 0 -#define OPENCLOSE 0 -#define HW 0 -#define TALK 0 -#define IRQ 0 -#define XFER 0 -#define REQUEST 0 -#define SLEEP 0 - -/* The following addresses are taken from the Mitsumi Reference - * and describe the possible i/o range for the controller. - */ -#define MCDX_IO_BEGIN ((char*) 0x300) /* first base of i/o addr */ -#define MCDX_IO_END ((char*) 0x3fc) /* last base of i/o addr */ - -/* Per controller 4 bytes i/o are needed. */ -#define MCDX_IO_SIZE 4 - -/* - * Bits - */ - -/* The status byte, returned from every command, set if - * the description is true */ -#define MCDX_RBIT_OPEN 0x80 /* door is open */ -#define MCDX_RBIT_DISKSET 0x40 /* disk set (recognised) */ -#define MCDX_RBIT_CHANGED 0x20 /* disk was changed */ -#define MCDX_RBIT_CHECK 0x10 /* disk rotates, servo is on */ -#define MCDX_RBIT_AUDIOTR 0x08 /* current track is audio */ -#define MCDX_RBIT_RDERR 0x04 /* read error, refer SENSE KEY */ -#define MCDX_RBIT_AUDIOBS 0x02 /* currently playing audio */ -#define MCDX_RBIT_CMDERR 0x01 /* command, param or format error */ - -/* The I/O Register holding the h/w status of the drive, - * can be read at i/o base + 1 */ -#define MCDX_RBIT_DOOR 0x10 /* door is open */ -#define MCDX_RBIT_STEN 0x04 /* if 0, i/o base contains drive status */ -#define MCDX_RBIT_DTEN 0x02 /* if 0, i/o base contains data */ - -/* - * The commands. - */ - -#define OPCODE 1 /* offset of opcode */ -#define MCDX_CMD_REQUEST_TOC 1, 0x10 -#define MCDX_CMD_REQUEST_STATUS 1, 0x40 -#define MCDX_CMD_RESET 1, 0x60 -#define MCDX_CMD_REQUEST_DRIVE_MODE 1, 0xc2 -#define MCDX_CMD_SET_INTERLEAVE 2, 0xc8, 0 -#define MCDX_CMD_DATAMODE_SET 2, 0xa0, 0 - #define MCDX_DATAMODE1 0x01 - #define MCDX_DATAMODE2 0x02 -#define MCDX_CMD_LOCK_DOOR 2, 0xfe, 0 - -#define READ_AHEAD 4 /* 8 Sectors (4K) */ - -/* Useful macros */ -#define e_door(x) ((x) & MCDX_RBIT_OPEN) -#define e_check(x) (~(x) & MCDX_RBIT_CHECK) -#define e_notset(x) (~(x) & MCDX_RBIT_DISKSET) -#define e_changed(x) ((x) & MCDX_RBIT_CHANGED) -#define e_audio(x) ((x) & MCDX_RBIT_AUDIOTR) -#define e_audiobusy(x) ((x) & MCDX_RBIT_AUDIOBS) -#define e_cmderr(x) ((x) & MCDX_RBIT_CMDERR) -#define e_readerr(x) ((x) & MCDX_RBIT_RDERR) - -/** no drive specific */ -#define MCDX_CDBLK 2048 /* 2048 cooked data each blk */ - -#define MCDX_DATA_TIMEOUT (HZ/10) /* 0.1 second */ - -/* - * Access to the msf array - */ -#define MSF_MIN 0 /* minute */ -#define MSF_SEC 1 /* second */ -#define MSF_FRM 2 /* frame */ - -/* - * Errors - */ -#define MCDX_E 1 /* unspec error */ -#define MCDX_ST_EOM 0x0100 /* end of media */ -#define MCDX_ST_DRV 0x00ff /* mask to query the drive status */ - -#ifndef I_WAS_HERE -#ifndef MODULE -#warning You have not edited mcdx.h -#warning Perhaps irq and i/o settings are wrong. -#endif -#endif - -/* ex:set ts=4 sw=4: */ diff --git a/drivers/cdrom/optcd.c b/drivers/cdrom/optcd.c deleted file mode 100644 index 3541690a77d..00000000000 --- a/drivers/cdrom/optcd.c +++ /dev/null @@ -1,2105 +0,0 @@ -/* linux/drivers/cdrom/optcd.c - Optics Storage 8000 AT CDROM driver - $Id: optcd.c,v 1.11 1997/01/26 07:13:00 davem Exp $ - - Copyright (C) 1995 Leo Spiekman (spiekman@dutette.et.tudelft.nl) - - - Based on Aztech CD268 CDROM driver by Werner Zimmermann and preworks - by Eberhard Moenkeberg (emoenke@gwdg.de). - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* Revision history - - - 14-5-95 v0.0 Plays sound tracks. No reading of data CDs yet. - Detection of disk change doesn't work. - 21-5-95 v0.1 First ALPHA version. CD can be mounted. The - device major nr is borrowed from the Aztech - driver. Speed is around 240 kb/s, as measured - with "time dd if=/dev/cdrom of=/dev/null \ - bs=2048 count=4096". - 24-6-95 v0.2 Reworked the #defines for the command codes - and the like, as well as the structure of - the hardware communication protocol, to - reflect the "official" documentation, kindly - supplied by C.K. Tan, Optics Storage Pte. Ltd. - Also tidied up the state machine somewhat. - 28-6-95 v0.3 Removed the ISP-16 interface code, as this - should go into its own driver. The driver now - has its own major nr. - Disk change detection now seems to work, too. - This version became part of the standard - kernel as of version 1.3.7 - 24-9-95 v0.4 Re-inserted ISP-16 interface code which I - copied from sjcd.c, with a few changes. - Updated README.optcd. Submitted for - inclusion in 1.3.21 - 29-9-95 v0.4a Fixed bug that prevented compilation as module - 25-10-95 v0.5 Started multisession code. Implementation - copied from Werner Zimmermann, who copied it - from Heiko Schlittermann's mcdx. - 17-1-96 v0.6 Multisession works; some cleanup too. - 18-4-96 v0.7 Increased some timing constants; - thanks to Luke McFarlane. Also tidied up some - printk behaviour. ISP16 initialization - is now handled by a separate driver. - - 09-11-99 Make kernel-parameter implementation work with 2.3.x - Removed init_module & cleanup_module in favor of - module_init & module_exit. - Torben Mathiasen <tmm@image.dk> -*/ - -/* Includes */ - - -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/ioport.h> -#include <linux/init.h> - -#include <asm/io.h> -#include <linux/blkdev.h> - -#include <linux/cdrom.h> -#include "optcd.h" - -#include <asm/uaccess.h> - -#define MAJOR_NR OPTICS_CDROM_MAJOR -#define QUEUE (opt_queue) -#define CURRENT elv_next_request(opt_queue) - - -/* Debug support */ - - -/* Don't forget to add new debug flags here. */ -#if DEBUG_DRIVE_IF | DEBUG_VFS | DEBUG_CONV | DEBUG_TOC | \ - DEBUG_BUFFERS | DEBUG_REQUEST | DEBUG_STATE | DEBUG_MULTIS -#define DEBUG(x) debug x -static void debug(int debug_this, const char* fmt, ...) -{ - char s[1024]; - va_list args; - - if (!debug_this) - return; - - va_start(args, fmt); - vsnprintf(s, sizeof(s), fmt, args); - printk(KERN_DEBUG "optcd: %s\n", s); - va_end(args); -} -#else -#define DEBUG(x) -#endif - - -/* Drive hardware/firmware characteristics - Identifiers in accordance with Optics Storage documentation */ - - -#define optcd_port optcd /* Needed for the modutils. */ -static short optcd_port = OPTCD_PORTBASE; /* I/O base of drive. */ -module_param(optcd_port, short, 0); -/* Drive registers, read */ -#define DATA_PORT optcd_port /* Read data/status */ -#define STATUS_PORT optcd_port+1 /* Indicate data/status availability */ - -/* Drive registers, write */ -#define COMIN_PORT optcd_port /* For passing command/parameter */ -#define RESET_PORT optcd_port+1 /* Write anything and wait 0.5 sec */ -#define HCON_PORT optcd_port+2 /* Host Xfer Configuration */ - - -/* Command completion/status read from DATA register */ -#define ST_DRVERR 0x80 -#define ST_DOOR_OPEN 0x40 -#define ST_MIXEDMODE_DISK 0x20 -#define ST_MODE_BITS 0x1c -#define ST_M_STOP 0x00 -#define ST_M_READ 0x04 -#define ST_M_AUDIO 0x04 -#define ST_M_PAUSE 0x08 -#define ST_M_INITIAL 0x0c -#define ST_M_ERROR 0x10 -#define ST_M_OTHERS 0x14 -#define ST_MODE2TRACK 0x02 -#define ST_DSK_CHG 0x01 -#define ST_L_LOCK 0x01 -#define ST_CMD_OK 0x00 -#define ST_OP_OK 0x01 -#define ST_PA_OK 0x02 -#define ST_OP_ERROR 0x05 -#define ST_PA_ERROR 0x06 - - -/* Error codes (appear as command completion code from DATA register) */ -/* Player related errors */ -#define ERR_ILLCMD 0x11 /* Illegal command to player module */ -#define ERR_ILLPARM 0x12 /* Illegal parameter to player module */ -#define ERR_SLEDGE 0x13 -#define ERR_FOCUS 0x14 -#define ERR_MOTOR 0x15 -#define ERR_RADIAL 0x16 -#define ERR_PLL 0x17 /* PLL lock error */ -#define ERR_SUB_TIM 0x18 /* Subcode timeout error */ -#define ERR_SUB_NF 0x19 /* Subcode not found error */ -#define ERR_TRAY 0x1a -#define ERR_TOC 0x1b /* Table of Contents read error */ -#define ERR_JUMP 0x1c -/* Data errors */ -#define ERR_MODE 0x21 -#define ERR_FORM 0x22 -#define ERR_HEADADDR 0x23 /* Header Address not found */ -#define ERR_CRC 0x24 -#define ERR_ECC 0x25 /* Uncorrectable ECC error */ -#define ERR_CRC_UNC 0x26 /* CRC error and uncorrectable error */ -#define ERR_ILLBSYNC 0x27 /* Illegal block sync error */ -#define ERR_VDST 0x28 /* VDST not found */ -/* Timeout errors */ -#define ERR_READ_TIM 0x31 /* Read timeout error */ -#define ERR_DEC_STP 0x32 /* Decoder stopped */ -#define ERR_DEC_TIM 0x33 /* Decoder interrupt timeout error */ -/* Function abort codes */ -#define ERR_KEY 0x41 /* Key -Detected abort */ -#define ERR_READ_FINISH 0x42 /* Read Finish */ -/* Second Byte diagnostic codes */ -#define ERR_NOBSYNC 0x01 /* No block sync */ -#define ERR_SHORTB 0x02 /* Short block */ -#define ERR_LONGB 0x03 /* Long block */ -#define ERR_SHORTDSP 0x04 /* Short DSP word */ -#define ERR_LONGDSP 0x05 /* Long DSP word */ - - -/* Status availability flags read from STATUS register */ -#define FL_EJECT 0x20 -#define FL_WAIT 0x10 /* active low */ -#define FL_EOP 0x08 /* active low */ -#define FL_STEN 0x04 /* Status available when low */ -#define FL_DTEN 0x02 /* Data available when low */ -#define FL_DRQ 0x01 /* active low */ -#define FL_RESET 0xde /* These bits are high after a reset */ -#define FL_STDT (FL_STEN|FL_DTEN) - - -/* Transfer mode, written to HCON register */ -#define HCON_DTS 0x08 -#define HCON_SDRQB 0x04 -#define HCON_LOHI 0x02 -#define HCON_DMA16 0x01 - - -/* Drive command set, written to COMIN register */ -/* Quick response commands */ -#define COMDRVST 0x20 /* Drive Status Read */ -#define COMERRST 0x21 /* Error Status Read */ -#define COMIOCTLISTAT 0x22 /* Status Read; reset disk changed bit */ -#define COMINITSINGLE 0x28 /* Initialize Single Speed */ -#define COMINITDOUBLE 0x29 /* Initialize Double Speed */ -#define COMUNLOCK 0x30 /* Unlock */ -#define COMLOCK 0x31 /* Lock */ -#define COMLOCKST 0x32 /* Lock/Unlock Status */ -#define COMVERSION 0x40 /* Get Firmware Revision */ -#define COMVOIDREADMODE 0x50 /* Void Data Read Mode */ -/* Read commands */ -#define COMFETCH 0x60 /* Prefetch Data */ -#define COMREAD 0x61 /* Read */ -#define COMREADRAW 0x62 /* Read Raw Data */ -#define COMREADALL 0x63 /* Read All 2646 Bytes */ -/* Player control commands */ -#define COMLEADIN 0x70 /* Seek To Lead-in */ -#define COMSEEK 0x71 /* Seek */ -#define COMPAUSEON 0x80 /* Pause On */ -#define COMPAUSEOFF 0x81 /* Pause Off */ -#define COMSTOP 0x82 /* Stop */ -#define COMOPEN 0x90 /* Open Tray Door */ -#define COMCLOSE 0x91 /* Close Tray Door */ -#define COMPLAY 0xa0 /* Audio Play */ -#define COMPLAY_TNO 0xa2 /* Audio Play By Track Number */ -#define COMSUBQ 0xb0 /* Read Sub-q Code */ -#define COMLOCATION 0xb1 /* Read Head Position */ -/* Audio control commands */ -#define COMCHCTRL 0xc0 /* Audio Channel Control */ -/* Miscellaneous (test) commands */ -#define COMDRVTEST 0xd0 /* Write Test Bytes */ -#define COMTEST 0xd1 /* Diagnostic Test */ - -/* Low level drive interface. Only here we do actual I/O - Waiting for status / data available */ - - -/* Busy wait until FLAG goes low. Return 0 on timeout. */ -static inline int flag_low(int flag, unsigned long timeout) -{ - int flag_high; - unsigned long count = 0; - - while ((flag_high = (inb(STATUS_PORT) & flag))) - if (++count >= timeout) - break; - - DEBUG((DEBUG_DRIVE_IF, "flag_low 0x%x count %ld%s", - flag, count, flag_high ? " timeout" : "")); - return !flag_high; -} - - -/* Timed waiting for status or data */ -static int sleep_timeout; /* max # of ticks to sleep */ -static DECLARE_WAIT_QUEUE_HEAD(waitq); -static void sleep_timer(unsigned long data); -static DEFINE_TIMER(delay_timer, sleep_timer, 0, 0); -static DEFINE_SPINLOCK(optcd_lock); -static struct request_queue *opt_queue; - -/* Timer routine: wake up when desired flag goes low, - or when timeout expires. */ -static void sleep_timer(unsigned long data) -{ - int flags = inb(STATUS_PORT) & FL_STDT; - - if (flags == FL_STDT && --sleep_timeout > 0) { - mod_timer(&delay_timer, jiffies + HZ/100); /* multi-statement macro */ - } else - wake_up(&waitq); -} - - -/* Sleep until FLAG goes low. Return 0 on timeout or wrong flag low. */ -static int sleep_flag_low(int flag, unsigned long timeout) -{ - int flag_high; - - DEBUG((DEBUG_DRIVE_IF, "sleep_flag_low")); - - sleep_timeout = timeout; - flag_high = inb(STATUS_PORT) & flag; - if (flag_high && sleep_timeout > 0) { - mod_timer(&delay_timer, jiffies + HZ/100); - sleep_on(&waitq); - flag_high = inb(STATUS_PORT) & flag; - } - - DEBUG((DEBUG_DRIVE_IF, "flag 0x%x count %ld%s", - flag, timeout, flag_high ? " timeout" : "")); - return !flag_high; -} - -/* Low level drive interface. Only here we do actual I/O - Sending commands and parameters */ - - -/* Errors in the command protocol */ -#define ERR_IF_CMD_TIMEOUT 0x100 -#define ERR_IF_ERR_TIMEOUT 0x101 -#define ERR_IF_RESP_TIMEOUT 0x102 -#define ERR_IF_DATA_TIMEOUT 0x103 -#define ERR_IF_NOSTAT 0x104 - - -/* Send command code. Return <0 indicates error */ -static int send_cmd(int cmd) -{ - unsigned char ack; - - DEBUG((DEBUG_DRIVE_IF, "sending command 0x%02x\n", cmd)); - - outb(HCON_DTS, HCON_PORT); /* Enable Suspend Data Transfer */ - outb(cmd, COMIN_PORT); /* Send command code */ - if (!flag_low(FL_STEN, BUSY_TIMEOUT)) /* Wait for status */ - return -ERR_IF_CMD_TIMEOUT; - ack = inb(DATA_PORT); /* read command acknowledge */ - outb(HCON_SDRQB, HCON_PORT); /* Disable Suspend Data Transfer */ - return ack==ST_OP_OK ? 0 : -ack; -} - - -/* Send command parameters. Return <0 indicates error */ -static int send_params(struct cdrom_msf *params) -{ - unsigned char ack; - - DEBUG((DEBUG_DRIVE_IF, "sending parameters" - " %02x:%02x:%02x" - " %02x:%02x:%02x", - params->cdmsf_min0, - params->cdmsf_sec0, - params->cdmsf_frame0, - params->cdmsf_min1, - params->cdmsf_sec1, - params->cdmsf_frame1)); - - outb(params->cdmsf_min0, COMIN_PORT); - outb(params->cdmsf_sec0, COMIN_PORT); - outb(params->cdmsf_frame0, COMIN_PORT); - outb(params->cdmsf_min1, COMIN_PORT); - outb(params->cdmsf_sec1, COMIN_PORT); - outb(params->cdmsf_frame1, COMIN_PORT); - if (!flag_low(FL_STEN, BUSY_TIMEOUT)) /* Wait for status */ - return -ERR_IF_CMD_TIMEOUT; - ack = inb(DATA_PORT); /* read command acknowledge */ - return ack==ST_PA_OK ? 0 : -ack; -} - - -/* Send parameters for SEEK command. Return <0 indicates error */ -static int send_seek_params(struct cdrom_msf *params) -{ - unsigned char ack; - - DEBUG((DEBUG_DRIVE_IF, "sending seek parameters" - " %02x:%02x:%02x", - params->cdmsf_min0, - params->cdmsf_sec0, - params->cdmsf_frame0)); - - outb(params->cdmsf_min0, COMIN_PORT); - outb(params->cdmsf_sec0, COMIN_PORT); - outb(params->cdmsf_frame0, COMIN_PORT); - if (!flag_low(FL_STEN, BUSY_TIMEOUT)) /* Wait for status */ - return -ERR_IF_CMD_TIMEOUT; - ack = inb(DATA_PORT); /* read command acknowledge */ - return ack==ST_PA_OK ? 0 : -ack; -} - - -/* Wait for command execution status. Choice between busy waiting - and sleeping. Return value <0 indicates timeout. */ -static inline int get_exec_status(int busy_waiting) -{ - unsigned char exec_status; - - if (busy_waiting - ? !flag_low(FL_STEN, BUSY_TIMEOUT) - : !sleep_flag_low(FL_STEN, SLEEP_TIMEOUT)) - return -ERR_IF_CMD_TIMEOUT; - - exec_status = inb(DATA_PORT); - DEBUG((DEBUG_DRIVE_IF, "returned exec status 0x%02x", exec_status)); - return exec_status; -} - - -/* Wait busy for extra byte of data that a command returns. - Return value <0 indicates timeout. */ -static inline int get_data(int short_timeout) -{ - unsigned char data; - - if (!flag_low(FL_STEN, short_timeout ? FAST_TIMEOUT : BUSY_TIMEOUT)) - return -ERR_IF_DATA_TIMEOUT; - - data = inb(DATA_PORT); - DEBUG((DEBUG_DRIVE_IF, "returned data 0x%02x", data)); - return data; -} - - -/* Returns 0 if failed */ -static int reset_drive(void) -{ - unsigned long count = 0; - int flags; - - DEBUG((DEBUG_DRIVE_IF, "reset drive")); - - outb(0, RESET_PORT); - while (++count < RESET_WAIT) - inb(DATA_PORT); - - count = 0; - while ((flags = (inb(STATUS_PORT) & FL_RESET)) != FL_RESET) - if (++count >= BUSY_TIMEOUT) - break; - - DEBUG((DEBUG_DRIVE_IF, "reset %s", - flags == FL_RESET ? "succeeded" : "failed")); - - if (flags != FL_RESET) - return 0; /* Reset failed */ - outb(HCON_SDRQB, HCON_PORT); /* Disable Suspend Data Transfer */ - return 1; /* Reset succeeded */ -} - - -/* Facilities for asynchronous operation */ - -/* Read status/data availability flags FL_STEN and FL_DTEN */ -static inline int stdt_flags(void) -{ - return inb(STATUS_PORT) & FL_STDT; -} - - -/* Fetch status that has previously been waited for. <0 means not available */ -static inline int fetch_status(void) -{ - unsigned char status; - - if (inb(STATUS_PORT) & FL_STEN) - return -ERR_IF_NOSTAT; - - status = inb(DATA_PORT); - DEBUG((DEBUG_DRIVE_IF, "fetched exec status 0x%02x", status)); - return status; -} - - -/* Fetch data that has previously been waited for. */ -static inline void fetch_data(char *buf, int n) -{ - insb(DATA_PORT, buf, n); - DEBUG((DEBUG_DRIVE_IF, "fetched 0x%x bytes", n)); -} - - -/* Flush status and data fifos */ -static inline void flush_data(void) -{ - while ((inb(STATUS_PORT) & FL_STDT) != FL_STDT) - inb(DATA_PORT); - DEBUG((DEBUG_DRIVE_IF, "flushed fifos")); -} - -/* Command protocol */ - - -/* Send a simple command and wait for response. Command codes < COMFETCH - are quick response commands */ -static inline int exec_cmd(int cmd) -{ - int ack = send_cmd(cmd); - if (ack < 0) - return ack; - return get_exec_status(cmd < COMFETCH); -} - - -/* Send a command with parameters. Don't wait for the response, - * which consists of data blocks read from the CD. */ -static inline int exec_read_cmd(int cmd, struct cdrom_msf *params) -{ - int ack = send_cmd(cmd); - if (ack < 0) - return ack; - return send_params(params); -} - - -/* Send a seek command with parameters and wait for response */ -static inline int exec_seek_cmd(int cmd, struct cdrom_msf *params) -{ - int ack = send_cmd(cmd); - if (ack < 0) - return ack; - ack = send_seek_params(params); - if (ack < 0) - return ack; - return 0; -} - - -/* Send a command with parameters and wait for response */ -static inline int exec_long_cmd(int cmd, struct cdrom_msf *params) -{ - int ack = exec_read_cmd(cmd, params); - if (ack < 0) - return ack; - return get_exec_status(0); -} - -/* Address conversion routines */ - - -/* Binary to BCD (2 digits) */ -static inline void single_bin2bcd(u_char *p) -{ - DEBUG((DEBUG_CONV, "bin2bcd %02d", *p)); - *p = (*p % 10) | ((*p / 10) << 4); -} - - -/* Convert entire msf struct */ -static void bin2bcd(struct cdrom_msf *msf) -{ - single_bin2bcd(&msf->cdmsf_min0); - single_bin2bcd(&msf->cdmsf_sec0); - single_bin2bcd(&msf->cdmsf_frame0); - single_bin2bcd(&msf->cdmsf_min1); - single_bin2bcd(&msf->cdmsf_sec1); - single_bin2bcd(&msf->cdmsf_frame1); -} - - -/* Linear block address to minute, second, frame form */ -#define CD_FPM (CD_SECS * CD_FRAMES) /* frames per minute */ - -static void lba2msf(int lba, struct cdrom_msf *msf) -{ - DEBUG((DEBUG_CONV, "lba2msf %d", lba)); - lba += CD_MSF_OFFSET; - msf->cdmsf_min0 = lba / CD_FPM; lba %= CD_FPM; - msf->cdmsf_sec0 = lba / CD_FRAMES; - msf->cdmsf_frame0 = lba % CD_FRAMES; - msf->cdmsf_min1 = 0; - msf->cdmsf_sec1 = 0; - msf->cdmsf_frame1 = 0; - bin2bcd(msf); -} - - -/* Two BCD digits to binary */ -static inline u_char bcd2bin(u_char bcd) -{ - DEBUG((DEBUG_CONV, "bcd2bin %x%02x", bcd)); - return (bcd >> 4) * 10 + (bcd & 0x0f); -} - - -static void msf2lba(union cdrom_addr *addr) -{ - addr->lba = addr->msf.minute * CD_FPM - + addr->msf.second * CD_FRAMES - + addr->msf.frame - CD_MSF_OFFSET; -} - - -/* Minute, second, frame address BCD to binary or to linear address, - depending on MODE */ -static void msf_bcd2bin(union cdrom_addr *addr) -{ - addr->msf.minute = bcd2bin(addr->msf.minute); - addr->msf.second = bcd2bin(addr->msf.second); - addr->msf.frame = bcd2bin(addr->msf.frame); -} - -/* High level drive commands */ - - -static int audio_status = CDROM_AUDIO_NO_STATUS; -static char toc_uptodate = 0; -static char disk_changed = 1; - -/* Get drive status, flagging completion of audio play and disk changes. */ -static int drive_status(void) -{ - int status; - - status = exec_cmd(COMIOCTLISTAT); - DEBUG((DEBUG_DRIVE_IF, "IOCTLISTAT: %03x", status)); - if (status < 0) - return status; - if (status == 0xff) /* No status available */ - return -ERR_IF_NOSTAT; - - if (((status & ST_MODE_BITS) != ST_M_AUDIO) && - (audio_status == CDROM_AUDIO_PLAY)) { - audio_status = CDROM_AUDIO_COMPLETED; - } - - if (status & ST_DSK_CHG) { - toc_uptodate = 0; - disk_changed = 1; - audio_status = CDROM_AUDIO_NO_STATUS; - } - - return status; -} - - -/* Read the current Q-channel info. Also used for reading the - table of contents. qp->cdsc_format must be set on entry to - indicate the desired address format */ -static int get_q_channel(struct cdrom_subchnl *qp) -{ - int status, d1, d2, d3, d4, d5, d6, d7, d8, d9, d10; - - status = drive_status(); - if (status < 0) - return status; - qp->cdsc_audiostatus = audio_status; - - status = exec_cmd(COMSUBQ); - if (status < 0) - return status; - - d1 = get_data(0); - if (d1 < 0) - return d1; - qp->cdsc_adr = d1; - qp->cdsc_ctrl = d1 >> 4; - - d2 = get_data(0); - if (d2 < 0) - return d2; - qp->cdsc_trk = bcd2bin(d2); - - d3 = get_data(0); - if (d3 < 0) - return d3; - qp->cdsc_ind = bcd2bin(d3); - - d4 = get_data(0); - if (d4 < 0) - return d4; - qp->cdsc_reladdr.msf.minute = d4; - - d5 = get_data(0); - if (d5 < 0) - return d5; - qp->cdsc_reladdr.msf.second = d5; - - d6 = get_data(0); - if (d6 < 0) - return d6; - qp->cdsc_reladdr.msf.frame = d6; - - d7 = get_data(0); - if (d7 < 0) - return d7; - /* byte not used */ - - d8 = get_data(0); - if (d8 < 0) - return d8; - qp->cdsc_absaddr.msf.minute = d8; - - d9 = get_data(0); - if (d9 < 0) - return d9; - qp->cdsc_absaddr.msf.second = d9; - - d10 = get_data(0); - if (d10 < 0) - return d10; - qp->cdsc_absaddr.msf.frame = d10; - - DEBUG((DEBUG_TOC, "%02x %02x %02x %02x %02x %02x %02x %02x %02x %02x", - d1, d2, d3, d4, d5, d6, d7, d8, d9, d10)); - - msf_bcd2bin(&qp->cdsc_absaddr); - msf_bcd2bin(&qp->cdsc_reladdr); - if (qp->cdsc_format == CDROM_LBA) { - msf2lba(&qp->cdsc_absaddr); - msf2lba(&qp->cdsc_reladdr); - } - - return 0; -} - -/* Table of contents handling */ - - -/* Errors in table of contents */ -#define ERR_TOC_MISSINGINFO 0x120 -#define ERR_TOC_MISSINGENTRY 0x121 - - -struct cdrom_disk_info { - unsigned char first; - unsigned char last; - struct cdrom_msf0 disk_length; - struct cdrom_msf0 first_track; - /* Multisession info: */ - unsigned char next; - struct cdrom_msf0 next_session; - struct cdrom_msf0 last_session; - unsigned char multi; - unsigned char xa; - unsigned char audio; -}; -static struct cdrom_disk_info disk_info; - -#define MAX_TRACKS 111 -static struct cdrom_subchnl toc[MAX_TRACKS]; - -#define QINFO_FIRSTTRACK 100 /* bcd2bin(0xa0) */ -#define QINFO_LASTTRACK 101 /* bcd2bin(0xa1) */ -#define QINFO_DISKLENGTH 102 /* bcd2bin(0xa2) */ -#define QINFO_NEXTSESSION 110 /* bcd2bin(0xb0) */ - -#define I_FIRSTTRACK 0x01 -#define I_LASTTRACK 0x02 -#define I_DISKLENGTH 0x04 -#define I_NEXTSESSION 0x08 -#define I_ALL (I_FIRSTTRACK | I_LASTTRACK | I_DISKLENGTH) - - -#if DEBUG_TOC -static void toc_debug_info(int i) -{ - printk(KERN_DEBUG "#%3d ctl %1x, adr %1x, track %2d index %3d" - " %2d:%02d.%02d %2d:%02d.%02d\n", - i, toc[i].cdsc_ctrl, toc[i].cdsc_adr, - toc[i].cdsc_trk, toc[i].cdsc_ind, - toc[i].cdsc_reladdr.msf.minute, - toc[i].cdsc_reladdr.msf.second, - toc[i].cdsc_reladdr.msf.frame, - toc[i].cdsc_absaddr.msf.minute, - toc[i].cdsc_absaddr.msf.second, - toc[i].cdsc_absaddr.msf.frame); -} -#endif - - -static int read_toc(void) -{ - int status, limit, count; - unsigned char got_info = 0; - struct cdrom_subchnl q_info; -#if DEBUG_TOC - int i; -#endif - - DEBUG((DEBUG_TOC, "starting read_toc")); - - count = 0; - for (limit = 60; limit > 0; limit--) { - int index; - - q_info.cdsc_format = CDROM_MSF; - status = get_q_channel(&q_info); - if (status < 0) - return status; - - index = q_info.cdsc_ind; - if (index > 0 && index < MAX_TRACKS - && q_info.cdsc_trk == 0 && toc[index].cdsc_ind == 0) { - toc[index] = q_info; - DEBUG((DEBUG_TOC, "got %d", index)); - if (index < 100) - count++; - - switch (q_info.cdsc_ind) { - case QINFO_FIRSTTRACK: - got_info |= I_FIRSTTRACK; - break; - case QINFO_LASTTRACK: - got_info |= I_LASTTRACK; - break; - case QINFO_DISKLENGTH: - got_info |= I_DISKLENGTH; - break; - case QINFO_NEXTSESSION: - got_info |= I_NEXTSESSION; - break; - } - } - - if ((got_info & I_ALL) == I_ALL - && toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute + count - >= toc[QINFO_LASTTRACK].cdsc_absaddr.msf.minute + 1) - break; - } - - /* Construct disk_info from TOC */ - if (disk_info.first == 0) { - disk_info.first = toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute; - disk_info.first_track.minute = - toc[disk_info.first].cdsc_absaddr.msf.minute; - disk_info.first_track.second = - toc[disk_info.first].cdsc_absaddr.msf.second; - disk_info.first_track.frame = - toc[disk_info.first].cdsc_absaddr.msf.frame; - } - disk_info.last = toc[QINFO_LASTTRACK].cdsc_absaddr.msf.minute; - disk_info.disk_length.minute = - toc[QINFO_DISKLENGTH].cdsc_absaddr.msf.minute; - disk_info.disk_length.second = - toc[QINFO_DISKLENGTH].cdsc_absaddr.msf.second-2; - disk_info.disk_length.frame = - toc[QINFO_DISKLENGTH].cdsc_absaddr.msf.frame; - disk_info.next_session.minute = - toc[QINFO_NEXTSESSION].cdsc_reladdr.msf.minute; - disk_info.next_session.second = - toc[QINFO_NEXTSESSION].cdsc_reladdr.msf.second; - disk_info.next_session.frame = - toc[QINFO_NEXTSESSION].cdsc_reladdr.msf.frame; - disk_info.next = toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute; - disk_info.last_session.minute = - toc[disk_info.next].cdsc_absaddr.msf.minute; - disk_info.last_session.second = - toc[disk_info.next].cdsc_absaddr.msf.second; - disk_info.last_session.frame = - toc[disk_info.next].cdsc_absaddr.msf.frame; - toc[disk_info.last + 1].cdsc_absaddr.msf.minute = - disk_info.disk_length.minute; - toc[disk_info.last + 1].cdsc_absaddr.msf.second = - disk_info.disk_length.second; - toc[disk_info.last + 1].cdsc_absaddr.msf.frame = - disk_info.disk_length.frame; -#if DEBUG_TOC - for (i = 1; i <= disk_info.last + 1; i++) - toc_debug_info(i); - toc_debug_info(QINFO_FIRSTTRACK); - toc_debug_info(QINFO_LASTTRACK); - toc_debug_info(QINFO_DISKLENGTH); - toc_debug_info(QINFO_NEXTSESSION); -#endif - - DEBUG((DEBUG_TOC, "exiting read_toc, got_info %x, count %d", - got_info, count)); - if ((got_info & I_ALL) != I_ALL - || toc[QINFO_FIRSTTRACK].cdsc_absaddr.msf.minute + count - < toc[QINFO_LASTTRACK].cdsc_absaddr.msf.minute + 1) - return -ERR_TOC_MISSINGINFO; - return 0; -} - - -#ifdef MULTISESSION -static int get_multi_disk_info(void) -{ - int sessions, status; - struct cdrom_msf multi_index; - - - for (sessions = 2; sessions < 10 /* %%for now */; sessions++) { - int count; - - for (count = 100; count < MAX_TRACKS; count++) - toc[count].cdsc_ind = 0; - - multi_index.cdmsf_min0 = disk_info.next_session.minute; - multi_index.cdmsf_sec0 = disk_info.next_session.second; - multi_index.cdmsf_frame0 = disk_info.next_session.frame; - if (multi_index.cdmsf_sec0 >= 20) - multi_index.cdmsf_sec0 -= 20; - else { - multi_index.cdmsf_sec0 += 40; - multi_index.cdmsf_min0--; - } - DEBUG((DEBUG_MULTIS, "Try %d: %2d:%02d.%02d", sessions, - multi_index.cdmsf_min0, - multi_index.cdmsf_sec0, - multi_index.cdmsf_frame0)); - bin2bcd(&multi_index); - multi_index.cdmsf_min1 = 0; - multi_index.cdmsf_sec1 = 0; - multi_index.cdmsf_frame1 = 1; - - status = exec_read_cmd(COMREAD, &multi_index); - if (status < 0) { - DEBUG((DEBUG_TOC, "exec_read_cmd COMREAD: %02x", - -status)); - break; - } - status = sleep_flag_low(FL_DTEN, MULTI_SEEK_TIMEOUT) ? - 0 : -ERR_TOC_MISSINGINFO; - flush_data(); - if (status < 0) { - DEBUG((DEBUG_TOC, "sleep_flag_low: %02x", -status)); - break; - } - - status = read_toc(); - if (status < 0) { - DEBUG((DEBUG_TOC, "read_toc: %02x", -status)); - break; - } - - disk_info.multi = 1; - } - - exec_cmd(COMSTOP); - - if (status < 0) - return -EIO; - return 0; -} -#endif /* MULTISESSION */ - - -static int update_toc(void) -{ - int status, count; - - if (toc_uptodate) - return 0; - - DEBUG((DEBUG_TOC, "starting update_toc")); - - disk_info.first = 0; - for (count = 0; count < MAX_TRACKS; count++) - toc[count].cdsc_ind = 0; - - status = exec_cmd(COMLEADIN); - if (status < 0) - return -EIO; - - status = read_toc(); - if (status < 0) { - DEBUG((DEBUG_TOC, "read_toc: %02x", -status)); - return -EIO; - } - - /* Audio disk detection. Look at first track. */ - disk_info.audio = - (toc[disk_info.first].cdsc_ctrl & CDROM_DATA_TRACK) ? 0 : 1; - - /* XA detection */ - disk_info.xa = drive_status() & ST_MODE2TRACK; - - /* Multisession detection: if we want this, define MULTISESSION */ - disk_info.multi = 0; -#ifdef MULTISESSION - if (disk_info.xa) - get_multi_disk_info(); /* Here disk_info.multi is set */ -#endif /* MULTISESSION */ - if (disk_info.multi) - printk(KERN_WARNING "optcd: Multisession support experimental, " - "see Documentation/cdrom/optcd\n"); - - DEBUG((DEBUG_TOC, "exiting update_toc")); - - toc_uptodate = 1; - return 0; -} - -/* Request handling */ - -static int current_valid(void) -{ - return CURRENT && - CURRENT->cmd == READ && - CURRENT->sector != -1; -} - -/* Buffers for block size conversion. */ -#define NOBUF -1 - -static char buf[CD_FRAMESIZE * N_BUFS]; -static volatile int buf_bn[N_BUFS], next_bn; -static volatile int buf_in = 0, buf_out = NOBUF; - -static inline void opt_invalidate_buffers(void) -{ - int i; - - DEBUG((DEBUG_BUFFERS, "executing opt_invalidate_buffers")); - - for (i = 0; i < N_BUFS; i++) - buf_bn[i] = NOBUF; - buf_out = NOBUF; -} - - -/* Take care of the different block sizes between cdrom and Linux. - When Linux gets variable block sizes this will probably go away. */ -static void transfer(void) -{ -#if DEBUG_BUFFERS | DEBUG_REQUEST - printk(KERN_DEBUG "optcd: executing transfer\n"); -#endif - - if (!current_valid()) - return; - while (CURRENT -> nr_sectors) { - int bn = CURRENT -> sector / 4; - int i, offs, nr_sectors; - for (i = 0; i < N_BUFS && buf_bn[i] != bn; ++i); - - DEBUG((DEBUG_REQUEST, "found %d", i)); - - if (i >= N_BUFS) { - buf_out = NOBUF; - break; - } - - offs = (i * 4 + (CURRENT -> sector & 3)) * 512; - nr_sectors = 4 - (CURRENT -> sector & 3); - - if (buf_out != i) { - buf_out = i; - if (buf_bn[i] != bn) { - buf_out = NOBUF; - continue; - } - } - - if (nr_sectors > CURRENT -> nr_sectors) - nr_sectors = CURRENT -> nr_sectors; - memcpy(CURRENT -> buffer, buf + offs, nr_sectors * 512); - CURRENT -> nr_sectors -= nr_sectors; - CURRENT -> sector += nr_sectors; - CURRENT -> buffer += nr_sectors * 512; - } -} - - -/* State machine for reading disk blocks */ - -enum state_e { - S_IDLE, /* 0 */ - S_START, /* 1 */ - S_READ, /* 2 */ - S_DATA, /* 3 */ - S_STOP, /* 4 */ - S_STOPPING /* 5 */ -}; - -static volatile enum state_e state = S_IDLE; -#if DEBUG_STATE -static volatile enum state_e state_old = S_STOP; -static volatile int flags_old = 0; -static volatile long state_n = 0; -#endif - - -/* Used as mutex to keep do_optcd_request (and other processes calling - ioctl) out while some process is inside a VFS call. - Reverse is accomplished by checking if state = S_IDLE upon entry - of opt_ioctl and opt_media_change. */ -static int in_vfs = 0; - - -static volatile int transfer_is_active = 0; -static volatile int error = 0; /* %% do something with this?? */ -static int tries; /* ibid?? */ -static int timeout = 0; - -static void poll(unsigned long data); -static struct timer_list req_timer = {.function = poll}; - - -static void poll(unsigned long data) -{ - static volatile int read_count = 1; - int flags; - int loop_again = 1; - int status = 0; - int skip = 0; - - if (error) { - printk(KERN_ERR "optcd: I/O error 0x%02x\n", error); - opt_invalidate_buffers(); - if (!tries--) { - printk(KERN_ERR "optcd: read block %d failed;" - " Giving up\n", next_bn); - if (transfer_is_active) - loop_again = 0; - if (current_valid()) - end_request(CURRENT, 0); - tries = 5; - } - error = 0; - state = S_STOP; - } - - while (loop_again) - { - loop_again = 0; /* each case must flip this back to 1 if we want - to come back up here */ - -#if DEBUG_STATE - if (state == state_old) - state_n++; - else { - state_old = state; - if (++state_n > 1) - printk(KERN_DEBUG "optcd: %ld times " - "in previous state\n", state_n); - printk(KERN_DEBUG "optcd: state %d\n", state); - state_n = 0; - } -#endif - - switch (state) { - case S_IDLE: - return; - case S_START: - if (in_vfs) - break; - if (send_cmd(COMDRVST)) { - state = S_IDLE; - while (current_valid()) - end_request(CURRENT, 0); - return; - } - state = S_READ; - timeout = READ_TIMEOUT; - break; - case S_READ: { - struct cdrom_msf msf; - if (!skip) { - status = fetch_status(); - if (status < 0) - break; - if (status & ST_DSK_CHG) { - toc_uptodate = 0; - opt_invalidate_buffers(); - } - } - skip = 0; - if ((status & ST_DOOR_OPEN) || (status & ST_DRVERR)) { - toc_uptodate = 0; - opt_invalidate_buffers(); - printk(KERN_WARNING "optcd: %s\n", - (status & ST_DOOR_OPEN) - ? "door open" - : "disk removed"); - state = S_IDLE; - while (current_valid()) - end_request(CURRENT, 0); - return; - } - if (!current_valid()) { - state = S_STOP; - loop_again = 1; - break; - } - next_bn = CURRENT -> sector / 4; - lba2msf(next_bn, &msf); - read_count = N_BUFS; - msf.cdmsf_frame1 = read_count; /* Not BCD! */ - - DEBUG((DEBUG_REQUEST, "reading %x:%x.%x %x:%x.%x", - msf.cdmsf_min0, - msf.cdmsf_sec0, - msf.cdmsf_frame0, - msf.cdmsf_min1, - msf.cdmsf_sec1, - msf.cdmsf_frame1)); - DEBUG((DEBUG_REQUEST, "next_bn:%d buf_in:%d" - " buf_out:%d buf_bn:%d", - next_bn, - buf_in, - buf_out, - buf_bn[buf_in])); - - exec_read_cmd(COMREAD, &msf); - state = S_DATA; - timeout = READ_TIMEOUT; - break; - } - case S_DATA: - flags = stdt_flags() & (FL_STEN|FL_DTEN); - -#if DEBUG_STATE - if (flags != flags_old) { - flags_old = flags; - printk(KERN_DEBUG "optcd: flags:%x\n", flags); - } - if (flags == FL_STEN) - printk(KERN_DEBUG "timeout cnt: %d\n", timeout); -#endif - - switch (flags) { - case FL_DTEN: /* only STEN low */ - if (!tries--) { - printk(KERN_ERR - "optcd: read block %d failed; " - "Giving up\n", next_bn); - if (transfer_is_active) { - tries = 0; - break; - } - if (current_valid()) - end_request(CURRENT, 0); - tries = 5; - } - state = S_START; - timeout = READ_TIMEOUT; - loop_again = 1; - case (FL_STEN|FL_DTEN): /* both high */ - break; - default: /* DTEN low */ - tries = 5; - if (!current_valid() && buf_in == buf_out) { - state = S_STOP; - loop_again = 1; - break; - } - if (read_count<=0) - printk(KERN_WARNING - "optcd: warning - try to read" - " 0 frames\n"); - while (read_count) { - buf_bn[buf_in] = NOBUF; - if (!flag_low(FL_DTEN, BUSY_TIMEOUT)) { - /* should be no waiting here!?? */ - printk(KERN_ERR - "read_count:%d " - "CURRENT->nr_sectors:%ld " - "buf_in:%d\n", - read_count, - CURRENT->nr_sectors, - buf_in); - printk(KERN_ERR - "transfer active: %x\n", - transfer_is_active); - read_count = 0; - state = S_STOP; - loop_again = 1; - end_request(CURRENT, 0); - break; - } - fetch_data(buf+ - CD_FRAMESIZE*buf_in, - CD_FRAMESIZE); - read_count--; - - DEBUG((DEBUG_REQUEST, - "S_DATA; ---I've read data- " - "read_count: %d", - read_count)); - DEBUG((DEBUG_REQUEST, - "next_bn:%d buf_in:%d " - "buf_out:%d buf_bn:%d", - next_bn, - buf_in, - buf_out, - buf_bn[buf_in])); - - buf_bn[buf_in] = next_bn++; - if (buf_out == NOBUF) - buf_out = buf_in; - buf_in = buf_in + 1 == - N_BUFS ? 0 : buf_in + 1; - } - if (!transfer_is_active) { - while (current_valid()) { - transfer(); - if (CURRENT -> nr_sectors == 0) - end_request(CURRENT, 1); - else - break; - } - } - - if (current_valid() - && (CURRENT -> sector / 4 < next_bn || - CURRENT -> sector / 4 > - next_bn + N_BUFS)) { - state = S_STOP; - loop_again = 1; - break; - } - timeout = READ_TIMEOUT; - if (read_count == 0) { - state = S_STOP; - loop_again = 1; - break; - } - } - break; - case S_STOP: - if (read_count != 0) - printk(KERN_ERR - "optcd: discard data=%x frames\n", - read_count); - flush_data(); - if (send_cmd(COMDRVST)) { - state = S_IDLE; - while (current_valid()) - end_request(CURRENT, 0); - return; - } - state = S_STOPPING; - timeout = STOP_TIMEOUT; - break; - case S_STOPPING: - status = fetch_status(); - if (status < 0 && timeout) - break; - if ((status >= 0) && (status & ST_DSK_CHG)) { - toc_uptodate = 0; - opt_invalidate_buffers(); - } - if (current_valid()) { - if (status >= 0) { - state = S_READ; - loop_again = 1; - skip = 1; - break; - } else { - state = S_START; - timeout = 1; - } - } else { - state = S_IDLE; - return; - } - break; - default: - printk(KERN_ERR "optcd: invalid state %d\n", state); - return; - } /* case */ - } /* while */ - - if (!timeout--) { - printk(KERN_ERR "optcd: timeout in state %d\n", state); - state = S_STOP; - if (exec_cmd(COMSTOP) < 0) { - state = S_IDLE; - while (current_valid()) - end_request(CURRENT, 0); - return; - } - } - - mod_timer(&req_timer, jiffies + HZ/100); -} - - -static void do_optcd_request(request_queue_t * q) -{ - DEBUG((DEBUG_REQUEST, "do_optcd_request(%ld+%ld)", - CURRENT -> sector, CURRENT -> nr_sectors)); - - if (disk_info.audio) { - printk(KERN_WARNING "optcd: tried to mount an Audio CD\n"); - end_request(CURRENT, 0); - return; - } - - transfer_is_active = 1; - while (current_valid()) { - transfer(); /* First try to transfer block from buffers */ - if (CURRENT -> nr_sectors == 0) { - end_request(CURRENT, 1); - } else { /* Want to read a block not in buffer */ - buf_out = NOBUF; - if (state == S_IDLE) { - /* %% Should this block the request queue?? */ - if (update_toc() < 0) { - while (current_valid()) - end_request(CURRENT, 0); - break; - } - /* Start state machine */ - state = S_START; - timeout = READ_TIMEOUT; - tries = 5; - /* %% why not start right away?? */ - mod_timer(&req_timer, jiffies + HZ/100); - } - break; - } - } - transfer_is_active = 0; - - DEBUG((DEBUG_REQUEST, "next_bn:%d buf_in:%d buf_out:%d buf_bn:%d", - next_bn, buf_in, buf_out, buf_bn[buf_in])); - DEBUG((DEBUG_REQUEST, "do_optcd_request ends")); -} - -/* IOCTLs */ - - -static char auto_eject = 0; - -static int cdrompause(void) -{ - int status; - - if (audio_status != CDROM_AUDIO_PLAY) - return -EINVAL; - - status = exec_cmd(COMPAUSEON); - if (status < 0) { - DEBUG((DEBUG_VFS, "exec_cmd COMPAUSEON: %02x", -status)); - return -EIO; - } - audio_status = CDROM_AUDIO_PAUSED; - return 0; -} - - -static int cdromresume(void) -{ - int status; - - if (audio_status != CDROM_AUDIO_PAUSED) - return -EINVAL; - - status = exec_cmd(COMPAUSEOFF); - if (status < 0) { - DEBUG((DEBUG_VFS, "exec_cmd COMPAUSEOFF: %02x", -status)); - audio_status = CDROM_AUDIO_ERROR; - return -EIO; - } - audio_status = CDROM_AUDIO_PLAY; - return 0; -} - - -static int cdromplaymsf(void __user *arg) -{ - int status; - struct cdrom_msf msf; - - if (copy_from_user(&msf, arg, sizeof msf)) - return -EFAULT; - - bin2bcd(&msf); - status = exec_long_cmd(COMPLAY, &msf); - if (status < 0) { - DEBUG((DEBUG_VFS, "exec_long_cmd COMPLAY: %02x", -status)); - audio_status = CDROM_AUDIO_ERROR; - return -EIO; - } - - audio_status = CDROM_AUDIO_PLAY; - return 0; -} - - -static int cdromplaytrkind(void __user *arg) -{ - int status; - struct cdrom_ti ti; - struct cdrom_msf msf; - - if (copy_from_user(&ti, arg, sizeof ti)) - return -EFAULT; - - if (ti.cdti_trk0 < disk_info.first - || ti.cdti_trk0 > disk_info.last - || ti.cdti_trk1 < ti.cdti_trk0) - return -EINVAL; - if (ti.cdti_trk1 > disk_info.last) - ti.cdti_trk1 = disk_info.last; - - msf.cdmsf_min0 = toc[ti.cdti_trk0].cdsc_absaddr.msf.minute; - msf.cdmsf_sec0 = toc[ti.cdti_trk0].cdsc_absaddr.msf.second; - msf.cdmsf_frame0 = toc[ti.cdti_trk0].cdsc_absaddr.msf.frame; - msf.cdmsf_min1 = toc[ti.cdti_trk1 + 1].cdsc_absaddr.msf.minute; - msf.cdmsf_sec1 = toc[ti.cdti_trk1 + 1].cdsc_absaddr.msf.second; - msf.cdmsf_frame1 = toc[ti.cdti_trk1 + 1].cdsc_absaddr.msf.frame; - - DEBUG((DEBUG_VFS, "play %02d:%02d.%02d to %02d:%02d.%02d", - msf.cdmsf_min0, - msf.cdmsf_sec0, - msf.cdmsf_frame0, - msf.cdmsf_min1, - msf.cdmsf_sec1, - msf.cdmsf_frame1)); - - bin2bcd(&msf); - status = exec_long_cmd(COMPLAY, &msf); - if (status < 0) { - DEBUG((DEBUG_VFS, "exec_long_cmd COMPLAY: %02x", -status)); - audio_status = CDROM_AUDIO_ERROR; - return -EIO; - } - - audio_status = CDROM_AUDIO_PLAY; - return 0; -} - - -static int cdromreadtochdr(void __user *arg) -{ - struct cdrom_tochdr tochdr; - - tochdr.cdth_trk0 = disk_info.first; - tochdr.cdth_trk1 = disk_info.last; - - return copy_to_user(arg, &tochdr, sizeof tochdr) ? -EFAULT : 0; -} - - -static int cdromreadtocentry(void __user *arg) -{ - struct cdrom_tocentry entry; - struct cdrom_subchnl *tocptr; - - if (copy_from_user(&entry, arg, sizeof entry)) - return -EFAULT; - - if (entry.cdte_track == CDROM_LEADOUT) - tocptr = &toc[disk_info.last + 1]; - else if (entry.cdte_track > disk_info.last - || entry.cdte_track < disk_info.first) - return -EINVAL; - else - tocptr = &toc[entry.cdte_track]; - - entry.cdte_adr = tocptr->cdsc_adr; - entry.cdte_ctrl = tocptr->cdsc_ctrl; - entry.cdte_addr.msf.minute = tocptr->cdsc_absaddr.msf.minute; - entry.cdte_addr.msf.second = tocptr->cdsc_absaddr.msf.second; - entry.cdte_addr.msf.frame = tocptr->cdsc_absaddr.msf.frame; - /* %% What should go into entry.cdte_datamode? */ - - if (entry.cdte_format == CDROM_LBA) - msf2lba(&entry.cdte_addr); - else if (entry.cdte_format != CDROM_MSF) - return -EINVAL; - - return copy_to_user(arg, &entry, sizeof entry) ? -EFAULT : 0; -} - - -static int cdromvolctrl(void __user *arg) -{ - int status; - struct cdrom_volctrl volctrl; - struct cdrom_msf msf; - - if (copy_from_user(&volctrl, arg, sizeof volctrl)) - return -EFAULT; - - msf.cdmsf_min0 = 0x10; - msf.cdmsf_sec0 = 0x32; - msf.cdmsf_frame0 = volctrl.channel0; - msf.cdmsf_min1 = volctrl.channel1; - msf.cdmsf_sec1 = volctrl.channel2; - msf.cdmsf_frame1 = volctrl.channel3; - - status = exec_long_cmd(COMCHCTRL, &msf); - if (status < 0) { - DEBUG((DEBUG_VFS, "exec_long_cmd COMCHCTRL: %02x", -status)); - return -EIO; - } - return 0; -} - - -static int cdromsubchnl(void __user *arg) -{ - int status; - struct cdrom_subchnl subchnl; - - if (copy_from_user(&subchnl, arg, sizeof subchnl)) - return -EFAULT; - - if (subchnl.cdsc_format != CDROM_LBA - && subchnl.cdsc_format != CDROM_MSF) - return -EINVAL; - - status = get_q_channel(&subchnl); - if (status < 0) { - DEBUG((DEBUG_VFS, "get_q_channel: %02x", -status)); - return -EIO; - } - - if (copy_to_user(arg, &subchnl, sizeof subchnl)) - return -EFAULT; - return 0; -} - - -static struct gendisk *optcd_disk; - - -static int cdromread(void __user *arg, int blocksize, int cmd) -{ - int status; - struct cdrom_msf msf; - - if (copy_from_user(&msf, arg, sizeof msf)) - return -EFAULT; - - bin2bcd(&msf); - msf.cdmsf_min1 = 0; - msf.cdmsf_sec1 = 0; - msf.cdmsf_frame1 = 1; /* read only one frame */ - status = exec_read_cmd(cmd, &msf); - - DEBUG((DEBUG_VFS, "read cmd status 0x%x", status)); - - if (!sleep_flag_low(FL_DTEN, SLEEP_TIMEOUT)) - return -EIO; - - fetch_data(optcd_disk->private_data, blocksize); - - if (copy_to_user(arg, optcd_disk->private_data, blocksize)) - return -EFAULT; - - return 0; -} - - -static int cdromseek(void __user *arg) -{ - int status; - struct cdrom_msf msf; - - if (copy_from_user(&msf, arg, sizeof msf)) - return -EFAULT; - - bin2bcd(&msf); - status = exec_seek_cmd(COMSEEK, &msf); - - DEBUG((DEBUG_VFS, "COMSEEK status 0x%x", status)); - - if (status < 0) - return -EIO; - return 0; -} - - -#ifdef MULTISESSION -static int cdrommultisession(void __user *arg) -{ - struct cdrom_multisession ms; - - if (copy_from_user(&ms, arg, sizeof ms)) - return -EFAULT; - - ms.addr.msf.minute = disk_info.last_session.minute; - ms.addr.msf.second = disk_info.last_session.second; - ms.addr.msf.frame = disk_info.last_session.frame; - - if (ms.addr_format != CDROM_LBA - && ms.addr_format != CDROM_MSF) - return -EINVAL; - if (ms.addr_format == CDROM_LBA) - msf2lba(&ms.addr); - - ms.xa_flag = disk_info.xa; - - if (copy_to_user(arg, &ms, sizeof(struct cdrom_multisession))) - return -EFAULT; - -#if DEBUG_MULTIS - if (ms.addr_format == CDROM_MSF) - printk(KERN_DEBUG - "optcd: multisession xa:%d, msf:%02d:%02d.%02d\n", - ms.xa_flag, - ms.addr.msf.minute, - ms.addr.msf.second, - ms.addr.msf.frame); - else - printk(KERN_DEBUG - "optcd: multisession %d, lba:0x%08x [%02d:%02d.%02d])\n", - ms.xa_flag, - ms.addr.lba, - disk_info.last_session.minute, - disk_info.last_session.second, - disk_info.last_session.frame); -#endif /* DEBUG_MULTIS */ - - return 0; -} -#endif /* MULTISESSION */ - - -static int cdromreset(void) -{ - if (state != S_IDLE) { - error = 1; - tries = 0; - } - - toc_uptodate = 0; - disk_changed = 1; - opt_invalidate_buffers(); - audio_status = CDROM_AUDIO_NO_STATUS; - - if (!reset_drive()) - return -EIO; - return 0; -} - -/* VFS calls */ - - -static int opt_ioctl(struct inode *ip, struct file *fp, - unsigned int cmd, unsigned long arg) -{ - int status, err, retval = 0; - void __user *argp = (void __user *)arg; - - DEBUG((DEBUG_VFS, "starting opt_ioctl")); - - if (!ip) - return -EINVAL; - - if (cmd == CDROMRESET) - return cdromreset(); - - /* is do_optcd_request or another ioctl busy? */ - if (state != S_IDLE || in_vfs) - return -EBUSY; - - in_vfs = 1; - - status = drive_status(); - if (status < 0) { - DEBUG((DEBUG_VFS, "drive_status: %02x", -status)); - in_vfs = 0; - return -EIO; - } - - if (status & ST_DOOR_OPEN) - switch (cmd) { /* Actions that can be taken with door open */ - case CDROMCLOSETRAY: - /* We do this before trying to read the toc. */ - err = exec_cmd(COMCLOSE); - if (err < 0) { - DEBUG((DEBUG_VFS, - "exec_cmd COMCLOSE: %02x", -err)); - in_vfs = 0; - return -EIO; - } - break; - default: in_vfs = 0; - return -EBUSY; - } - - err = update_toc(); - if (err < 0) { - DEBUG((DEBUG_VFS, "update_toc: %02x", -err)); - in_vfs = 0; - return -EIO; - } - - DEBUG((DEBUG_VFS, "ioctl cmd 0x%x", cmd)); - - switch (cmd) { - case CDROMPAUSE: retval = cdrompause(); break; - case CDROMRESUME: retval = cdromresume(); break; - case CDROMPLAYMSF: retval = cdromplaymsf(argp); break; - case CDROMPLAYTRKIND: retval = cdromplaytrkind(argp); break; - case CDROMREADTOCHDR: retval = cdromreadtochdr(argp); break; - case CDROMREADTOCENTRY: retval = cdromreadtocentry(argp); break; - - case CDROMSTOP: err = exec_cmd(COMSTOP); - if (err < 0) { - DEBUG((DEBUG_VFS, - "exec_cmd COMSTOP: %02x", - -err)); - retval = -EIO; - } else - audio_status = CDROM_AUDIO_NO_STATUS; - break; - case CDROMSTART: break; /* This is a no-op */ - case CDROMEJECT: err = exec_cmd(COMUNLOCK); - if (err < 0) { - DEBUG((DEBUG_VFS, - "exec_cmd COMUNLOCK: %02x", - -err)); - retval = -EIO; - break; - } - err = exec_cmd(COMOPEN); - if (err < 0) { - DEBUG((DEBUG_VFS, - "exec_cmd COMOPEN: %02x", - -err)); - retval = -EIO; - } - break; - - case CDROMVOLCTRL: retval = cdromvolctrl(argp); break; - case CDROMSUBCHNL: retval = cdromsubchnl(argp); break; - - /* The drive detects the mode and automatically delivers the - correct 2048 bytes, so we don't need these IOCTLs */ - case CDROMREADMODE2: retval = -EINVAL; break; - case CDROMREADMODE1: retval = -EINVAL; break; - - /* Drive doesn't support reading audio */ - case CDROMREADAUDIO: retval = -EINVAL; break; - - case CDROMEJECT_SW: auto_eject = (char) arg; - break; - -#ifdef MULTISESSION - case CDROMMULTISESSION: retval = cdrommultisession(argp); break; -#endif - - case CDROM_GET_MCN: retval = -EINVAL; break; /* not implemented */ - case CDROMVOLREAD: retval = -EINVAL; break; /* not implemented */ - - case CDROMREADRAW: - /* this drive delivers 2340 bytes in raw mode */ - retval = cdromread(argp, CD_FRAMESIZE_RAW1, COMREADRAW); - break; - case CDROMREADCOOKED: - retval = cdromread(argp, CD_FRAMESIZE, COMREAD); - break; - case CDROMREADALL: - retval = cdromread(argp, CD_FRAMESIZE_RAWER, COMREADALL); - break; - - case CDROMSEEK: retval = cdromseek(argp); break; - case CDROMPLAYBLK: retval = -EINVAL; break; /* not implemented */ - case CDROMCLOSETRAY: break; /* The action was taken earlier */ - default: retval = -EINVAL; - } - in_vfs = 0; - return retval; -} - - -static int open_count = 0; - -/* Open device special file; check that a disk is in. */ -static int opt_open(struct inode *ip, struct file *fp) -{ - DEBUG((DEBUG_VFS, "starting opt_open")); - - if (!open_count && state == S_IDLE) { - int status; - char *buf; - - buf = kmalloc(CD_FRAMESIZE_RAWER, GFP_KERNEL); - if (!buf) { - printk(KERN_INFO "optcd: cannot allocate read buffer\n"); - return -ENOMEM; - } - optcd_disk->private_data = buf; /* save read buffer */ - - toc_uptodate = 0; - opt_invalidate_buffers(); - - status = exec_cmd(COMCLOSE); /* close door */ - if (status < 0) { - DEBUG((DEBUG_VFS, "exec_cmd COMCLOSE: %02x", -status)); - } - - status = drive_status(); - if (status < 0) { - DEBUG((DEBUG_VFS, "drive_status: %02x", -status)); - goto err_out; - } - DEBUG((DEBUG_VFS, "status: %02x", status)); - if ((status & ST_DOOR_OPEN) || (status & ST_DRVERR)) { - printk(KERN_INFO "optcd: no disk or door open\n"); - goto err_out; - } - status = exec_cmd(COMLOCK); /* Lock door */ - if (status < 0) { - DEBUG((DEBUG_VFS, "exec_cmd COMLOCK: %02x", -status)); - } - status = update_toc(); /* Read table of contents */ - if (status < 0) { - DEBUG((DEBUG_VFS, "update_toc: %02x", -status)); - status = exec_cmd(COMUNLOCK); /* Unlock door */ - if (status < 0) { - DEBUG((DEBUG_VFS, - "exec_cmd COMUNLOCK: %02x", -status)); - } - goto err_out; - } - open_count++; - } - - DEBUG((DEBUG_VFS, "exiting opt_open")); - - return 0; - -err_out: - return -EIO; -} - - -/* Release device special file; flush all blocks from the buffer cache */ -static int opt_release(struct inode *ip, struct file *fp) -{ - int status; - - DEBUG((DEBUG_VFS, "executing opt_release")); - DEBUG((DEBUG_VFS, "inode: %p, device: %s, file: %p\n", - ip, ip->i_bdev->bd_disk->disk_name, fp)); - - if (!--open_count) { - toc_uptodate = 0; - opt_invalidate_buffers(); - status = exec_cmd(COMUNLOCK); /* Unlock door */ - if (status < 0) { - DEBUG((DEBUG_VFS, "exec_cmd COMUNLOCK: %02x", -status)); - } - if (auto_eject) { - status = exec_cmd(COMOPEN); - DEBUG((DEBUG_VFS, "exec_cmd COMOPEN: %02x", -status)); - } - kfree(optcd_disk->private_data); - del_timer(&delay_timer); - del_timer(&req_timer); - } - return 0; -} - - -/* Check if disk has been changed */ -static int opt_media_change(struct gendisk *disk) -{ - DEBUG((DEBUG_VFS, "executing opt_media_change")); - DEBUG((DEBUG_VFS, "dev: %s; disk_changed = %d\n", - disk->disk_name, disk_changed)); - - if (disk_changed) { - disk_changed = 0; - return 1; - } - return 0; -} - -/* Driver initialisation */ - - -/* Returns 1 if a drive is detected with a version string - starting with "DOLPHIN". Otherwise 0. */ -static int __init version_ok(void) -{ - char devname[100]; - int count, i, ch, status; - - status = exec_cmd(COMVERSION); - if (status < 0) { - DEBUG((DEBUG_VFS, "exec_cmd COMVERSION: %02x", -status)); - return 0; - } - if ((count = get_data(1)) < 0) { - DEBUG((DEBUG_VFS, "get_data(1): %02x", -count)); - return 0; - } - for (i = 0, ch = -1; count > 0; count--) { - if ((ch = get_data(1)) < 0) { - DEBUG((DEBUG_VFS, "get_data(1): %02x", -ch)); - break; - } - if (i < 99) - devname[i++] = ch; - } - devname[i] = '\0'; - if (ch < 0) - return 0; - - printk(KERN_INFO "optcd: Device %s detected\n", devname); - return ((devname[0] == 'D') - && (devname[1] == 'O') - && (devname[2] == 'L') - && (devname[3] == 'P') - && (devname[4] == 'H') - && (devname[5] == 'I') - && (devname[6] == 'N')); -} - - -static struct block_device_operations opt_fops = { - .owner = THIS_MODULE, - .open = opt_open, - .release = opt_release, - .ioctl = opt_ioctl, - .media_changed = opt_media_change, -}; - -#ifndef MODULE -/* Get kernel parameter when used as a kernel driver */ -static int optcd_setup(char *str) -{ - int ints[4]; - (void)get_options(str, ARRAY_SIZE(ints), ints); - - if (ints[0] > 0) - optcd_port = ints[1]; - - return 1; -} - -__setup("optcd=", optcd_setup); - -#endif /* MODULE */ - -/* Test for presence of drive and initialize it. Called at boot time - or during module initialisation. */ -static int __init optcd_init(void) -{ - int status; - - if (optcd_port <= 0) { - printk(KERN_INFO - "optcd: no Optics Storage CDROM Initialization\n"); - return -EIO; - } - optcd_disk = alloc_disk(1); - if (!optcd_disk) { - printk(KERN_ERR "optcd: can't allocate disk\n"); - return -ENOMEM; - } - optcd_disk->major = MAJOR_NR; - optcd_disk->first_minor = 0; - optcd_disk->fops = &opt_fops; - sprintf(optcd_disk->disk_name, "optcd"); - - if (!request_region(optcd_port, 4, "optcd")) { - printk(KERN_ERR "optcd: conflict, I/O port 0x%x already used\n", - optcd_port); - put_disk(optcd_disk); - return -EIO; - } - - if (!reset_drive()) { - printk(KERN_ERR "optcd: drive at 0x%x not ready\n", optcd_port); - release_region(optcd_port, 4); - put_disk(optcd_disk); - return -EIO; - } - if (!version_ok()) { - printk(KERN_ERR "optcd: unknown drive detected; aborting\n"); - release_region(optcd_port, 4); - put_disk(optcd_disk); - return -EIO; - } - status = exec_cmd(COMINITDOUBLE); - if (status < 0) { - printk(KERN_ERR "optcd: cannot init double speed mode\n"); - release_region(optcd_port, 4); - DEBUG((DEBUG_VFS, "exec_cmd COMINITDOUBLE: %02x", -status)); - put_disk(optcd_disk); - return -EIO; - } - if (register_blkdev(MAJOR_NR, "optcd")) { - release_region(optcd_port, 4); - put_disk(optcd_disk); - return -EIO; - } - - - opt_queue = blk_init_queue(do_optcd_request, &optcd_lock); - if (!opt_queue) { - unregister_blkdev(MAJOR_NR, "optcd"); - release_region(optcd_port, 4); - put_disk(optcd_disk); - return -ENOMEM; - } - - blk_queue_hardsect_size(opt_queue, 2048); - optcd_disk->queue = opt_queue; - add_disk(optcd_disk); - - printk(KERN_INFO "optcd: DOLPHIN 8000 AT CDROM at 0x%x\n", optcd_port); - return 0; -} - - -static void __exit optcd_exit(void) -{ - del_gendisk(optcd_disk); - put_disk(optcd_disk); - if (unregister_blkdev(MAJOR_NR, "optcd") == -EINVAL) { - printk(KERN_ERR "optcd: what's that: can't unregister\n"); - return; - } - blk_cleanup_queue(opt_queue); - release_region(optcd_port, 4); - printk(KERN_INFO "optcd: module released.\n"); -} - -module_init(optcd_init); -module_exit(optcd_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS_BLOCKDEV_MAJOR(OPTICS_CDROM_MAJOR); diff --git a/drivers/cdrom/optcd.h b/drivers/cdrom/optcd.h deleted file mode 100644 index 1911bb92ee2..00000000000 --- a/drivers/cdrom/optcd.h +++ /dev/null @@ -1,52 +0,0 @@ -/* linux/include/linux/optcd.h - Optics Storage 8000 AT CDROM driver - $Id: optcd.h,v 1.2 1996/01/15 18:43:44 root Exp root $ - - Copyright (C) 1995 Leo Spiekman (spiekman@dutette.et.tudelft.nl) - - - Configuration file for linux/drivers/cdrom/optcd.c -*/ - -#ifndef _LINUX_OPTCD_H -#define _LINUX_OPTCD_H - - -/* I/O base of drive. Drive uses base to base+2. - This setting can be overridden with the kernel or insmod command - line option 'optcd=<portbase>'. Use address of 0 to disable driver. */ -#define OPTCD_PORTBASE 0x340 - - -/* enable / disable parts of driver by define / undef */ -#define MULTISESSION /* multisession support (ALPHA) */ - - -/* Change 0 to 1 to debug various parts of the driver */ -#define DEBUG_DRIVE_IF 0 /* Low level drive interface */ -#define DEBUG_CONV 0 /* Address conversions */ -#define DEBUG_BUFFERS 0 /* Buffering and block size conversion */ -#define DEBUG_REQUEST 0 /* Request mechanism */ -#define DEBUG_STATE 0 /* State machine */ -#define DEBUG_TOC 0 /* Q-channel and Table of Contents */ -#define DEBUG_MULTIS 0 /* Multisession code */ -#define DEBUG_VFS 0 /* VFS interface */ - - -/* Don't touch these unless you know what you're doing. */ - -/* Various timeout loop repetition counts. */ -#define BUSY_TIMEOUT 10000000 /* for busy wait */ -#define FAST_TIMEOUT 100000 /* ibid. for probing */ -#define SLEEP_TIMEOUT 6000 /* for timer wait */ -#define MULTI_SEEK_TIMEOUT 1000 /* for timer wait */ -#define READ_TIMEOUT 6000 /* for poll wait */ -#define STOP_TIMEOUT 2000 /* for poll wait */ -#define RESET_WAIT 5000 /* busy wait at drive reset */ - -/* # of buffers for block size conversion. 6 is optimal for my setup (P75), - giving 280 kb/s, with 0.4% CPU usage. Experiment to find your optimal - setting */ -#define N_BUFS 6 - - -#endif /* _LINUX_OPTCD_H */ diff --git a/drivers/cdrom/sbpcd.c b/drivers/cdrom/sbpcd.c deleted file mode 100644 index a1283b1ef98..00000000000 --- a/drivers/cdrom/sbpcd.c +++ /dev/null @@ -1,5966 +0,0 @@ -/* - * sbpcd.c CD-ROM device driver for the whole family of traditional, - * non-ATAPI IDE-style Matsushita/Panasonic CR-5xx drives. - * Works with SoundBlaster compatible cards and with "no-sound" - * interface cards like Lasermate, Panasonic CI-101P, Teac, ... - * Also for the Longshine LCS-7260 drive. - * Also for the IBM "External ISA CD-Rom" drive. - * Also for the CreativeLabs CD200 drive. - * Also for the TEAC CD-55A drive. - * Also for the ECS-AT "Vertos 100" drive. - * Not for Sanyo drives (but for the H94A, sjcd is there...). - * Not for any other Funai drives than the CD200 types (sometimes - * labelled E2550UA or MK4015 or 2800F). - */ - -#define VERSION "v4.63 Andrew J. Kroll <ag784@freenet.buffalo.edu> Wed Jul 26 04:24:10 EDT 2000" - -/* Copyright (C) 1993, 1994, 1995 Eberhard Moenkeberg <emoenke@gwdg.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * You should have received a copy of the GNU General Public License - * (for example /usr/src/linux/COPYING); if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * If you change this software, you should mail a .diff file with some - * description lines to emoenke@gwdg.de. I want to know about it. - * - * If you are the editor of a Linux CD, you should enable sbpcd.c within - * your boot floppy kernel and send me one of your CDs for free. - * - * If you would like to port the driver to an other operating system (f.e. - * FreeBSD or NetBSD) or use it as an information source, you shall not be - * restricted by the GPL under the following conditions: - * a) the source code of your work is freely available - * b) my part of the work gets mentioned at all places where your - * authorship gets mentioned - * c) I receive a copy of your code together with a full installation - * package of your operating system for free. - * - * - * VERSION HISTORY - * - * 0.1 initial release, April/May 93, after mcd.c (Martin Harriss) - * - * 0.2 thek "repeat:"-loop in do_sbpcd_request did not check for - * end-of-request_queue (resulting in kernel panic). - * Flow control seems stable, but throughput is not better. - * - * 0.3 interrupt locking totally eliminated (maybe "inb" and "outb" - * are still locking) - 0.2 made keyboard-type-ahead losses. - * check_sbpcd_media_change added (to use by isofs/inode.c) - * - but it detects almost nothing. - * - * 0.4 use MAJOR 25 definitely. - * Almost total re-design to support double-speed drives and - * "naked" (no sound) interface cards ("LaserMate" interface type). - * Flow control should be exact now. - * Don't occupy the SbPro IRQ line (not needed either); will - * live together with Hannu Savolainen's sndkit now. - * Speeded up data transfer to 150 kB/sec, with help from Kai - * Makisara, the "provider" of the "mt" tape utility. - * Give "SpinUp" command if necessary. - * First steps to support up to 4 drives (but currently only one). - * Implemented audio capabilities - workman should work, xcdplayer - * gives some problems. - * This version is still consuming too much CPU time, and - * sleeping still has to be worked on. - * During "long" implied seeks, it seems possible that a - * ReadStatus command gets ignored. That gives the message - * "ResponseStatus timed out" (happens about 6 times here during - * a "ls -alR" of the YGGDRASIL LGX-Beta CD). Such a case is - * handled without data error, but it should get done better. - * - * 0.5 Free CPU during waits (again with help from Kai Makisara). - * Made it work together with the LILO/kernel setup standard. - * Included auto-probing code, as suggested by YGGDRASIL. - * Formal redesign to add DDI debugging. - * There are still flaws in IOCTL (workman with double speed drive). - * - * 1.0 Added support for all drive IDs (0...3, no longer only 0) - * and up to 4 drives on one controller. - * Added "#define MANY_SESSION" for "old" multi session CDs. - * - * 1.1 Do SpinUp for new drives, too. - * Revised for clean compile under "old" kernels (0.99pl9). - * - * 1.2 Found the "workman with double-speed drive" bug: use the driver's - * audio_state, not what the drive is reporting with ReadSubQ. - * - * 1.3 Minor cleanups. - * Refinements regarding Workman. - * - * 1.4 Read XA disks (PhotoCDs) with "old" drives, too (but only the first - * session - no chance to fully access a "multi-session" CD). - * This currently still is too slow (50 kB/sec) - but possibly - * the old drives won't do it faster. - * Implemented "door (un)lock" for new drives (still does not work - * as wanted - no lock possible after an unlock). - * Added some debugging printout for the UPC/EAN code - but my drives - * return only zeroes. Is there no UPC/EAN code written? - * - * 1.5 Laborate with UPC/EAN code (not better yet). - * Adapt to kernel 1.1.8 change (have to explicitly include - * <linux/string.h> now). - * - * 1.6 Trying to read audio frames as data. Impossible with the current - * drive firmware levels, as it seems. Awaiting any hint. ;-) - * Changed "door unlock": repeat it until success. - * Changed CDROMSTOP routine (stop somewhat "softer" so that Workman - * won't get confused). - * Added a third interface type: Sequoia S-1000, as used with the SPEA - * Media FX sound card. This interface (usable for Sony and Mitsumi - * drives, too) needs a special configuration setup and behaves like a - * LaserMate type after that. Still experimental - I do not have such - * an interface. - * Use the "variable BLOCK_SIZE" feature (2048). But it does only work - * if you give the mount option "block=2048". - * The media_check routine is currently disabled; now that it gets - * called as it should I fear it must get synchronized for not to - * disturb the normal driver's activity. - * - * 2.0 Version number bumped - two reasons: - * - reading audio tracks as data works now with CR-562 and CR-563. We - * currently do it by an IOCTL (yet has to get standardized), one frame - * at a time; that is pretty slow. But it works. - * - we are maintaining now up to 4 interfaces (each up to 4 drives): - * did it the easy way - a different MAJOR (25, 26, ...) and a different - * copy of the driver (sbpcd.c, sbpcd2.c, sbpcd3.c, sbpcd4.c - only - * distinguished by the value of SBPCD_ISSUE and the driver's name), - * and a common sbpcd.h file. - * Bettered the "ReadCapacity error" problem with old CR-52x drives (the - * drives sometimes need a manual "eject/insert" before work): just - * reset the drive and do again. Needs lots of resets here and sometimes - * that does not cure, so this can't be the solution. - * - * 2.1 Found bug with multisession CDs (accessing frame 16). - * "read audio" works now with address type CDROM_MSF, too. - * Bigger audio frame buffer: allows reading max. 4 frames at time; this - * gives a significant speedup, but reading more than one frame at once - * gives missing chunks at each single frame boundary. - * - * 2.2 Kernel interface cleanups: timers, init, setup, media check. - * - * 2.3 Let "door lock" and "eject" live together. - * Implemented "close tray" (done automatically during open). - * - * 2.4 Use different names for device registering. - * - * 2.5 Added "#if EJECT" code (default: enabled) to automatically eject - * the tray during last call to "sbpcd_release". - * Added "#if JUKEBOX" code (default: disabled) to automatically eject - * the tray during call to "sbpcd_open" if no disk is in. - * Turn on the CD volume of "compatible" sound cards, too; just define - * SOUND_BASE (in sbpcd.h) accordingly (default: disabled). - * - * 2.6 Nothing new. - * - * 2.7 Added CDROMEJECT_SW ioctl to set the "EJECT" behavior on the fly: - * 0 disables, 1 enables auto-ejecting. Useful to keep the tray in - * during shutdown. - * - * 2.8 Added first support (still BETA, I need feedback or a drive) for - * the Longshine LCS-7260 drives. They appear as double-speed drives - * using the "old" command scheme, extended by tray control and door - * lock functions. - * Found (and fixed preliminary) a flaw with some multisession CDs: we - * have to re-direct not only the accesses to frame 16 (the isofs - * routines drive it up to max. 100), but also those to the continuation - * (repetition) frames (as far as they exist - currently set fix as - * 16..20). - * Changed default of the "JUKEBOX" define. If you use this default, - * your tray will eject if you try to mount without a disk in. Next - * mount command will insert the tray - so, just fill in a disk. ;-) - * - * 2.9 Fulfilled the Longshine LCS-7260 support; with great help and - * experiments by Serge Robyns. - * First attempts to support the TEAC CD-55A drives; but still not - * usable yet. - * Implemented the CDROMMULTISESSION ioctl; this is an attempt to handle - * multi session CDs more "transparent" (redirection handling has to be - * done within the isofs routines, and only for the special purpose of - * obtaining the "right" volume descriptor; accesses to the raw device - * should not get redirected). - * - * 3.0 Just a "normal" increment, with some provisions to do it better. ;-) - * Introduced "#define READ_AUDIO" to specify the maximum number of - * audio frames to grab with one request. This defines a buffer size - * within kernel space; a value of 0 will reserve no such space and - * disable the CDROMREADAUDIO ioctl. A value of 75 enables the reading - * of a whole second with one command, but will use a buffer of more - * than 172 kB. - * Started CD200 support. Drive detection should work, but nothing - * more. - * - * 3.1 Working to support the CD200 and the Teac CD-55A drives. - * AT-BUS style device numbering no longer used: use SCSI style now. - * So, the first "found" device has MINOR 0, regardless of the - * jumpered drive ID. This implies modifications to the /dev/sbpcd* - * entries for some people, but will help the DAU (german TLA, english: - * "newbie", maybe ;-) to install his "first" system from a CD. - * - * 3.2 Still testing with CD200 and CD-55A drives. - * - * 3.3 Working with CD200 support. - * - * 3.4 Auto-probing stops if an address of 0 is seen (to be entered with - * the kernel command line). - * Made the driver "loadable". If used as a module, "audio copy" is - * disabled, and the internal read ahead data buffer has a reduced size - * of 4 kB; so, throughput may be reduced a little bit with slow CPUs. - * - * 3.5 Provisions to handle weird photoCDs which have an interrupted - * "formatting" immediately after the last frames of some files: simply - * never "read ahead" with MultiSession CDs. By this, CPU usage may be - * increased with those CDs, and there may be a loss in speed. - * Re-structured the messaging system. - * The "loadable" version no longer has a limited READ_AUDIO buffer - * size. - * Removed "MANY_SESSION" handling for "old" multi session CDs. - * Added "private" IOCTLs CDROMRESET and CDROMVOLREAD. - * Started again to support the TEAC CD-55A drives, now that I found - * the money for "my own" drive. ;-) - * The TEAC CD-55A support is fairly working now. - * I have measured that the drive "delivers" at 600 kB/sec (even with - * bigger requests than the drive's 64 kB buffer can satisfy), but - * the "real" rate does not exceed 520 kB/sec at the moment. - * Caused by the various changes to build in TEAC support, the timed - * loops are de-optimized at the moment (less throughput with CR-52x - * drives, and the TEAC will give speed only with SBP_BUFFER_FRAMES 64). - * - * 3.6 Fixed TEAC data read problems with SbPro interfaces. - * Initial size of the READ_AUDIO buffer is 0. Can get set to any size - * during runtime. - * - * 3.7 Introduced MAX_DRIVES for some poor interface cards (seen with TEAC - * drives) which allow only one drive (ID 0); this avoids repetitive - * detection under IDs 1..3. - * Elongated cmd_out_T response waiting; necessary for photo CDs with - * a lot of sessions. - * Bettered the sbpcd_open() behavior with TEAC drives. - * - * 3.8 Elongated max_latency for CR-56x drives. - * - * 3.9 Finally fixed the long-known SoundScape/SPEA/Sequoia S-1000 interface - * configuration bug. - * Now Corey, Heiko, Ken, Leo, Vadim/Eric & Werner are invited to copy - * the config_spea() routine into their drivers. ;-) - * - * 4.0 No "big step" - normal version increment. - * Adapted the benefits from 1.3.33. - * Fiddled with CDROMREADAUDIO flaws. - * Avoid ReadCapacity command with CD200 drives (the MKE 1.01 version - * seems not to support it). - * Fulfilled "read audio" for CD200 drives, with help of Pete Heist - * (heistp@rpi.edu). - * - * 4.1 Use loglevel KERN_INFO with printk(). - * Added support for "Vertos 100" drive ("ECS-AT") - it is very similar - * to the Longshine LCS-7260. Give feedback if you can - I never saw - * such a drive, and I have no specs. - * - * 4.2 Support for Teac 16-bit interface cards. Can't get auto-detected, - * so you have to jumper your card to 0x2C0. Still not 100% - come - * in contact if you can give qualified feedback. - * Use loglevel KERN_NOTICE with printk(). If you get annoyed by a - * flood of unwanted messages and the accompanied delay, try to read - * my documentation. Especially the Linux CDROM drivers have to do an - * important job for the newcomers, so the "distributed" version has - * to fit some special needs. Since generations, the flood of messages - * is user-configurable (even at runtime), but to get aware of this, one - * needs a special mental quality: the ability to read. - * - * 4.3 CD200F does not like to receive a command while the drive is - * reading the ToC; still trying to solve it. - * Removed some redundant verify_area calls (yes, Heiko Eissfeldt - * is visiting all the Linux CDROM drivers ;-). - * - * 4.4 Adapted one idea from tiensivu@pilot.msu.edu's "stripping-down" - * experiments: "KLOGD_PAUSE". - * Inhibited "play audio" attempts with data CDs. Provisions for a - * "data-safe" handling of "mixed" (data plus audio) Cds. - * - * 4.5 Meanwhile Gonzalo Tornaria <tornaria@cmat.edu.uy> (GTL) built a - * special end_request routine: we seem to have to take care for not - * to have two processes working at the request list. My understanding - * was and is that ll_rw_blk should not call do_sbpcd_request as long - * as there is still one call active (the first call will care for all - * outstanding I/Os, and if a second call happens, that is a bug in - * ll_rw_blk.c). - * "Check media change" without touching any drive. - * - * 4.6 Use a semaphore to synchronize multi-activity; elaborated by Rob - * Riggs <rriggs@tesser.com>. At the moment, we simply block "read" - * against "ioctl" and vice versa. This could be refined further, but - * I guess with almost no performance increase. - * Experiments to speed up the CD-55A; again with help of Rob Riggs - * (to be true, he gave both, idea & code. ;-) - * - * 4.61 Ported to Uniform CD-ROM driver by - * Heiko Eissfeldt <heiko@colossus.escape.de> with additional - * changes by Erik Andersen <andersee@debian.org> - * - * 4.62 Fix a bug where playing audio left the drive in an unusable state. - * Heiko Eissfeldt <heiko@colossus.escape.de> - * - * November 1999 -- Make kernel-parameter implementation work with 2.3.x - * Removed init_module & cleanup_module in favor of - * module_init & module_exit. - * Torben Mathiasen <tmm@image.dk> - * - * 4.63 Bug fixes for audio annoyances, new legacy CDROM maintainer. - * Annoying things fixed: - * TOC reread on automated disk changes - * TOC reread on manual cd changes - * Play IOCTL tries to play CD before it's actually ready... sometimes. - * CD_AUDIO_COMPLETED state so workman (and other playes) can repeat play. - * Andrew J. Kroll <ag784@freenet.buffalo.edu> Wed Jul 26 04:24:10 EDT 2000 - * - * 4.64 Fix module parameters - were being completely ignored. - * Can also specify max_drives=N as a setup int to get rid of - * "ghost" drives on crap hardware (aren't they all?) Paul Gortmaker - * - * TODO - * implement "read all subchannel data" (96 bytes per frame) - * remove alot of the virtual status bits and deal with hardware status - * move the change of cd for audio to a better place - * add debug levels to insmod parameters (trivial) - * - * special thanks to Kai Makisara (kai.makisara@vtt.fi) for his fine - * elaborated speed-up experiments (and the fabulous results!), for - * the "push" towards load-free wait loops, and for the extensive mail - * thread which brought additional hints and bug fixes. - * - */ - -/* - * Trying to merge requests breaks this driver horribly (as in it goes - * boom and apparently has done so since 2.3.41). As it is a legacy - * driver for a horribly slow double speed CD on a hideous interface - * designed for polled operation, I won't lose any sleep in simply - * disallowing merging. Paul G. 02/2001 - * - * Thu May 30 14:14:47 CEST 2002: - * - * I have presumably found the reson for the above - there was a bogous - * end_request substitute, which was manipulating the request queues - * incorrectly. If someone has access to the actual hardware, and it's - * still operations - well please free to test it. - * - * Marcin Dalecki - */ - -/* - * Add bio/kdev_t changes for 2.5.x required to make it work again. - * Still room for improvement in the request handling here if anyone - * actually cares. Bring your own chainsaw. Paul G. 02/2002 - */ - - -#include <linux/module.h> - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/timer.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/cdrom.h> -#include <linux/ioport.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/vmalloc.h> -#include <linux/init.h> -#include <linux/interrupt.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <stdarg.h> -#include "sbpcd.h" - -#define MAJOR_NR MATSUSHITA_CDROM_MAJOR -#include <linux/blkdev.h> - -/*==========================================================================*/ -#if SBPCD_DIS_IRQ -# define SBPCD_CLI cli() -# define SBPCD_STI sti() -#else -# define SBPCD_CLI -# define SBPCD_STI -#endif - -/*==========================================================================*/ -/* - * auto-probing address list - * inspired by Adam J. Richter from Yggdrasil - * - * still not good enough - can cause a hang. - * example: a NE 2000 ethernet card at 300 will cause a hang probing 310. - * if that happens, reboot and use the LILO (kernel) command line. - * The possibly conflicting ethernet card addresses get NOT probed - * by default - to minimize the hang possibilities. - * - * The SB Pro addresses get "mirrored" at 0x6xx and some more locations - to - * avoid a type error, the 0x2xx-addresses must get checked before 0x6xx. - * - * send mail to emoenke@gwdg.de if your interface card is not FULLY - * represented here. - */ -static int sbpcd[] = -{ - CDROM_PORT, SBPRO, /* probe with user's setup first */ -#if DISTRIBUTION - 0x230, 1, /* Soundblaster Pro and 16 (default) */ -#if 0 - 0x300, 0, /* CI-101P (default), WDH-7001C (default), - Galaxy (default), Reveal (one default) */ - 0x250, 1, /* OmniCD default, Soundblaster Pro and 16 */ - 0x2C0, 3, /* Teac 16-bit cards */ - 0x260, 1, /* OmniCD */ - 0x320, 0, /* Lasermate, CI-101P, WDH-7001C, Galaxy, Reveal (other default), - Longshine LCS-6853 (default) */ - 0x338, 0, /* Reveal Sound Wave 32 card model #SC600 */ - 0x340, 0, /* Mozart sound card (default), Lasermate, CI-101P */ - 0x360, 0, /* Lasermate, CI-101P */ - 0x270, 1, /* Soundblaster 16 */ - 0x670, 0, /* "sound card #9" */ - 0x690, 0, /* "sound card #9" */ - 0x338, 2, /* SPEA Media FX, Ensonic SoundScape (default) */ - 0x328, 2, /* SPEA Media FX */ - 0x348, 2, /* SPEA Media FX */ - 0x634, 0, /* some newer sound cards */ - 0x638, 0, /* some newer sound cards */ - 0x230, 1, /* some newer sound cards */ - /* due to incomplete address decoding of the SbPro card, these must be last */ - 0x630, 0, /* "sound card #9" (default) */ - 0x650, 0, /* "sound card #9" */ -#ifdef MODULE - /* - * some "hazardous" locations (no harm with the loadable version) - * (will stop the bus if a NE2000 ethernet card resides at offset -0x10) - */ - 0x330, 0, /* Lasermate, CI-101P, WDH-7001C */ - 0x350, 0, /* Lasermate, CI-101P */ - 0x358, 2, /* SPEA Media FX */ - 0x370, 0, /* Lasermate, CI-101P */ - 0x290, 1, /* Soundblaster 16 */ - 0x310, 0, /* Lasermate, CI-101P, WDH-7001C */ -#endif /* MODULE */ -#endif -#endif /* DISTRIBUTION */ -}; - -/* - * Protects access to global structures etc. - */ -static __cacheline_aligned DEFINE_SPINLOCK(sbpcd_lock); -static struct request_queue *sbpcd_queue; - -/* You can only set the first pair, from old MODULE_PARM code. */ -static int sbpcd_set(const char *val, struct kernel_param *kp) -{ - get_options((char *)val, 2, (int *)sbpcd); - return 0; -} -module_param_call(sbpcd, sbpcd_set, NULL, NULL, 0); - -#define NUM_PROBE (sizeof(sbpcd) / sizeof(int)) - -/*==========================================================================*/ - -#define INLINE inline - -/*==========================================================================*/ -/* - * the forward references: - */ -static void sbp_sleep(u_int); -static void mark_timeout_delay(u_long); -static void mark_timeout_data(u_long); -#if 0 -static void mark_timeout_audio(u_long); -#endif -static void sbp_read_cmd(struct request *req); -static int sbp_data(struct request *req); -static int cmd_out(void); -static int DiskInfo(void); - -/*==========================================================================*/ - -/* - * pattern for printk selection: - * - * (1<<DBG_INF) necessary information - * (1<<DBG_BSZ) BLOCK_SIZE trace - * (1<<DBG_REA) "read" status trace - * (1<<DBG_CHK) "media check" trace - * (1<<DBG_TIM) datarate timer test - * (1<<DBG_INI) initialization trace - * (1<<DBG_TOC) tell TocEntry values - * (1<<DBG_IOC) ioctl trace - * (1<<DBG_STA) "ResponseStatus" trace - * (1<<DBG_ERR) "cc_ReadError" trace - * (1<<DBG_CMD) "cmd_out" trace - * (1<<DBG_WRN) give explanation before auto-probing - * (1<<DBG_MUL) multi session code test - * (1<<DBG_IDX) "drive_id != 0" test code - * (1<<DBG_IOX) some special information - * (1<<DBG_DID) drive ID test - * (1<<DBG_RES) drive reset info - * (1<<DBG_SPI) SpinUp test info - * (1<<DBG_IOS) ioctl trace: "subchannel" - * (1<<DBG_IO2) ioctl trace: general - * (1<<DBG_UPC) show UPC info - * (1<<DBG_XA1) XA mode debugging - * (1<<DBG_LCK) door (un)lock info - * (1<<DBG_SQ1) dump SubQ frame - * (1<<DBG_AUD) "read audio" debugging - * (1<<DBG_SEQ) Sequoia interface configuration trace - * (1<<DBG_LCS) Longshine LCS-7260 debugging trace - * (1<<DBG_CD2) MKE/Funai CD200 debugging trace - * (1<<DBG_TEA) TEAC CD-55A debugging trace - * (1<<DBG_ECS) ECS-AT (Vertos-100) debugging trace - * (1<<DBG_000) unnecessary information - */ -#if DISTRIBUTION -static int sbpcd_debug = (1<<DBG_INF); -#else -static int sbpcd_debug = 0 & ((1<<DBG_INF) | - (1<<DBG_TOC) | - (1<<DBG_MUL) | - (1<<DBG_UPC)); -#endif /* DISTRIBUTION */ - -static int sbpcd_ioaddr = CDROM_PORT; /* default I/O base address */ -static int sbpro_type = SBPRO; -static unsigned char f_16bit; -static unsigned char do_16bit; -static int CDo_command, CDo_reset; -static int CDo_sel_i_d, CDo_enable; -static int CDi_info, CDi_status, CDi_data; -static struct cdrom_msf msf; -static struct cdrom_ti ti; -static struct cdrom_tochdr tochdr; -static struct cdrom_tocentry tocentry; -static struct cdrom_subchnl SC; -static struct cdrom_volctrl volctrl; -static struct cdrom_read_audio read_audio; - -static unsigned char msgnum; -static char msgbuf[80]; - -static int max_drives = MAX_DRIVES; -module_param(max_drives, int, 0); -#ifndef MODULE -static unsigned char setup_done; -static const char *str_sb_l = "soundblaster"; -static const char *str_sp_l = "spea"; -static const char *str_ss_l = "soundscape"; -static const char *str_t16_l = "teac16bit"; -static const char *str_ss = "SoundScape"; -#endif -static const char *str_sb = "SoundBlaster"; -static const char *str_lm = "LaserMate"; -static const char *str_sp = "SPEA"; -static const char *str_t16 = "Teac16bit"; -static const char *type; -static const char *major_name="sbpcd"; - -/*==========================================================================*/ - -#ifdef FUTURE -static DECLARE_WAIT_QUEUE_HEAD(sbp_waitq); -#endif /* FUTURE */ - -static int teac=SBP_TEAC_SPEED; -static int buffers=SBP_BUFFER_FRAMES; - -static u_char family0[]="MATSHITA"; /* MKE CR-521, CR-522, CR-523 */ -static u_char family1[]="CR-56"; /* MKE CR-562, CR-563 */ -static u_char family2[]="CD200"; /* MKE CD200, Funai CD200F */ -static u_char familyL[]="LCS-7260"; /* Longshine LCS-7260 */ -static u_char familyT[]="CD-55"; /* TEAC CD-55A */ -static u_char familyV[]="ECS-AT"; /* ECS Vertos 100 */ - -static u_int recursion; /* internal testing only */ -static u_int fatal_err; /* internal testing only */ -static u_int response_count; -static u_int flags_cmd_out; -static u_char cmd_type; -static u_char drvcmd[10]; -static u_char infobuf[20]; -static u_char xa_head_buf[CD_XA_HEAD]; -static u_char xa_tail_buf[CD_XA_TAIL]; - -#if OLD_BUSY -static volatile u_char busy_data; -static volatile u_char busy_audio; /* true semaphores would be safer */ -#endif /* OLD_BUSY */ -static DECLARE_MUTEX(ioctl_read_sem); -static u_long timeout; -static volatile u_char timed_out_delay; -static volatile u_char timed_out_data; -#if 0 -static volatile u_char timed_out_audio; -#endif -static u_int datarate= 1000000; -static u_int maxtim16=16000000; -static u_int maxtim04= 4000000; -static u_int maxtim02= 2000000; -static u_int maxtim_8= 30000; -#if LONG_TIMING -static u_int maxtim_data= 9000; -#else -static u_int maxtim_data= 3000; -#endif /* LONG_TIMING */ -#if DISTRIBUTION -static int n_retries=6; -#else -static int n_retries=6; -#endif -/*==========================================================================*/ - -static int ndrives; -static u_char drv_pattern[NR_SBPCD]={speed_auto,speed_auto,speed_auto,speed_auto}; - -/*==========================================================================*/ -/* - * drive space begins here (needed separate for each unit) - */ -static struct sbpcd_drive { - char drv_id; /* "jumpered" drive ID or -1 */ - char drv_sel; /* drive select lines bits */ - - char drive_model[9]; - u_char firmware_version[4]; - char f_eject; /* auto-eject flag: 0 or 1 */ - u_char *sbp_buf; /* Pointer to internal data buffer, - space allocated during sbpcd_init() */ - u_int sbp_bufsiz; /* size of sbp_buf (# of frames) */ - int sbp_first_frame; /* First frame in buffer */ - int sbp_last_frame; /* Last frame in buffer */ - int sbp_read_frames; /* Number of frames being read to buffer */ - int sbp_current; /* Frame being currently read */ - - u_char mode; /* read_mode: READ_M1, READ_M2, READ_SC, READ_AU */ - u_char *aud_buf; /* Pointer to audio data buffer, - space allocated during sbpcd_init() */ - u_int sbp_audsiz; /* size of aud_buf (# of raw frames) */ - u_int drv_type; - u_char drv_options; - int status_bits; - u_char diskstate_flags; - u_char sense_byte; - - u_char CD_changed; - char open_count; - u_char error_byte; - - u_char f_multisession; - u_int lba_multi; - int first_session; - int last_session; - int track_of_last_session; - - u_char audio_state; - u_int pos_audio_start; - u_int pos_audio_end; - char vol_chan0; - u_char vol_ctrl0; - char vol_chan1; - u_char vol_ctrl1; -#if 000 /* no supported drive has it */ - char vol_chan2; - u_char vol_ctrl2; - char vol_chan3; - u_char vol_ctrl3; -#endif /*000 */ - u_char volume_control; /* TEAC on/off bits */ - - u_char SubQ_ctl_adr; - u_char SubQ_trk; - u_char SubQ_pnt_idx; - u_int SubQ_run_tot; - u_int SubQ_run_trk; - u_char SubQ_whatisthis; - - u_char UPC_ctl_adr; - u_char UPC_buf[7]; - - int frame_size; - int CDsize_frm; - - u_char xa_byte; /* 0x20: XA capabilities */ - u_char n_first_track; /* binary */ - u_char n_last_track; /* binary (not bcd), 0x01...0x63 */ - u_int size_msf; /* time of whole CD, position of LeadOut track */ - u_int size_blk; - - u_char TocEnt_nixbyte; /* em */ - u_char TocEnt_ctl_adr; - u_char TocEnt_number; - u_char TocEnt_format; /* em */ - u_int TocEnt_address; -#ifdef SAFE_MIXED - char has_data; -#endif /* SAFE_MIXED */ - u_char ored_ctl_adr; /* to detect if CDROM contains data tracks */ - - struct { - u_char nixbyte; /* em */ - u_char ctl_adr; /* 0x4x: data, 0x0x: audio */ - u_char number; - u_char format; /* em */ /* 0x00: lba, 0x01: msf */ - u_int address; - } TocBuffer[MAX_TRACKS+1]; /* last entry faked */ - - int in_SpinUp; /* CR-52x test flag */ - int n_bytes; /* TEAC awaited response count */ - u_char error_state, b3, b4; /* TEAC command error state */ - u_char f_drv_error; /* TEAC command error flag */ - u_char speed_byte; - int frmsiz; - u_char f_XA; /* 1: XA */ - u_char type_byte; /* 0, 1, 3 */ - u_char mode_xb_6; - u_char mode_yb_7; - u_char mode_xb_8; - u_char delay; - struct cdrom_device_info *sbpcd_infop; - struct gendisk *disk; -} D_S[NR_SBPCD]; - -static struct sbpcd_drive *current_drive = D_S; - -/* - * drive space ends here (needed separate for each unit) - */ -/*==========================================================================*/ -#if 0 -unsigned long cli_sti; /* for saving the processor flags */ -#endif -/*==========================================================================*/ -static DEFINE_TIMER(delay_timer, mark_timeout_delay, 0, 0); -static DEFINE_TIMER(data_timer, mark_timeout_data, 0, 0); -#if 0 -static DEFINE_TIMER(audio_timer, mark_timeout_audio, 0, 0); -#endif -/*==========================================================================*/ -/* - * DDI interface - */ -static void msg(int level, const char *fmt, ...) -{ -#if DISTRIBUTION -#define MSG_LEVEL KERN_NOTICE -#else -#define MSG_LEVEL KERN_INFO -#endif /* DISTRIBUTION */ - - char buf[256]; - va_list args; - - if (!(sbpcd_debug&(1<<level))) return; - - msgnum++; - if (msgnum>99) msgnum=0; - va_start(args, fmt); - vsnprintf(buf, sizeof(buf), fmt, args); - va_end(args); - printk(MSG_LEVEL "%s-%d [%02d]: %s", major_name, current_drive - D_S, msgnum, buf); -#if KLOGD_PAUSE - sbp_sleep(KLOGD_PAUSE); /* else messages get lost */ -#endif /* KLOGD_PAUSE */ - return; -} -/*==========================================================================*/ -/* - * DDI interface: runtime trace bit pattern maintenance - */ -static int sbpcd_dbg_ioctl(unsigned long arg, int level) -{ - switch(arg) - { - case 0: /* OFF */ - sbpcd_debug = DBG_INF; - break; - - default: - if (arg>=128) sbpcd_debug &= ~(1<<(arg-128)); - else sbpcd_debug |= (1<<arg); - } - return (arg); -} -/*==========================================================================*/ -static void mark_timeout_delay(u_long i) -{ - timed_out_delay=1; -#if 0 - msg(DBG_TIM,"delay timer expired.\n"); -#endif -} -/*==========================================================================*/ -static void mark_timeout_data(u_long i) -{ - timed_out_data=1; -#if 0 - msg(DBG_TIM,"data timer expired.\n"); -#endif -} -/*==========================================================================*/ -#if 0 -static void mark_timeout_audio(u_long i) -{ - timed_out_audio=1; -#if 0 - msg(DBG_TIM,"audio timer expired.\n"); -#endif -} -#endif -/*==========================================================================*/ -/* - * Wait a little while (used for polling the drive). - */ -static void sbp_sleep(u_int time) -{ - sti(); - schedule_timeout_interruptible(time); - sti(); -} -/*==========================================================================*/ -#define RETURN_UP(rc) {up(&ioctl_read_sem); return(rc);} -/*==========================================================================*/ -/* - * convert logical_block_address to m-s-f_number (3 bytes only) - */ -static INLINE void lba2msf(int lba, u_char *msf) -{ - lba += CD_MSF_OFFSET; - msf[0] = lba / (CD_SECS*CD_FRAMES); - lba %= CD_SECS*CD_FRAMES; - msf[1] = lba / CD_FRAMES; - msf[2] = lba % CD_FRAMES; -} -/*==========================================================================*/ -/*==========================================================================*/ -/* - * convert msf-bin to msf-bcd - */ -static INLINE void bin2bcdx(u_char *p) /* must work only up to 75 or 99 */ -{ - *p=((*p/10)<<4)|(*p%10); -} -/*==========================================================================*/ -static INLINE u_int blk2msf(u_int blk) -{ - MSF msf; - u_int mm; - - msf.c[3] = 0; - msf.c[2] = (blk + CD_MSF_OFFSET) / (CD_SECS * CD_FRAMES); - mm = (blk + CD_MSF_OFFSET) % (CD_SECS * CD_FRAMES); - msf.c[1] = mm / CD_FRAMES; - msf.c[0] = mm % CD_FRAMES; - return (msf.n); -} -/*==========================================================================*/ -static INLINE u_int make16(u_char rh, u_char rl) -{ - return ((rh<<8)|rl); -} -/*==========================================================================*/ -static INLINE u_int make32(u_int rh, u_int rl) -{ - return ((rh<<16)|rl); -} -/*==========================================================================*/ -static INLINE u_char swap_nibbles(u_char i) -{ - return ((i<<4)|(i>>4)); -} -/*==========================================================================*/ -static INLINE u_char byt2bcd(u_char i) -{ - return (((i/10)<<4)+i%10); -} -/*==========================================================================*/ -static INLINE u_char bcd2bin(u_char bcd) -{ - return ((bcd>>4)*10+(bcd&0x0F)); -} -/*==========================================================================*/ -static INLINE int msf2blk(int msfx) -{ - MSF msf; - int i; - - msf.n=msfx; - i=(msf.c[2] * CD_SECS + msf.c[1]) * CD_FRAMES + msf.c[0] - CD_MSF_OFFSET; - if (i<0) return (0); - return (i); -} -/*==========================================================================*/ -/* - * convert m-s-f_number (3 bytes only) to logical_block_address - */ -static INLINE int msf2lba(u_char *msf) -{ - int i; - - i=(msf[0] * CD_SECS + msf[1]) * CD_FRAMES + msf[2] - CD_MSF_OFFSET; - if (i<0) return (0); - return (i); -} -/*==========================================================================*/ -/* evaluate cc_ReadError code */ -static int sta2err(int sta) -{ - if (famT_drive) - { - if (sta==0x00) return (0); - if (sta==0x01) return (-604); /* CRC error */ - if (sta==0x02) return (-602); /* drive not ready */ - if (sta==0x03) return (-607); /* unknown media */ - if (sta==0x04) return (-612); /* general failure */ - if (sta==0x05) return (0); - if (sta==0x06) return (-ERR_DISKCHANGE); /* disk change */ - if (sta==0x0b) return (-612); /* general failure */ - if (sta==0xff) return (-612); /* general failure */ - return (0); - } - else - { - if (sta<=2) return (sta); - if (sta==0x05) return (-604); /* CRC error */ - if (sta==0x06) return (-606); /* seek error */ - if (sta==0x0d) return (-606); /* seek error */ - if (sta==0x0e) return (-603); /* unknown command */ - if (sta==0x14) return (-603); /* unknown command */ - if (sta==0x0c) return (-611); /* read fault */ - if (sta==0x0f) return (-611); /* read fault */ - if (sta==0x10) return (-611); /* read fault */ - if (sta>=0x16) return (-612); /* general failure */ - if (sta==0x11) return (-ERR_DISKCHANGE); /* disk change (LCS: removed) */ - if (famL_drive) - if (sta==0x12) return (-ERR_DISKCHANGE); /* disk change (inserted) */ - return (-602); /* drive not ready */ - } -} -/*==========================================================================*/ -static INLINE void clr_cmdbuf(void) -{ - int i; - - for (i=0;i<10;i++) drvcmd[i]=0; - cmd_type=0; -} -/*==========================================================================*/ -static void flush_status(void) -{ - int i; - - sbp_sleep(15*HZ/10); - for (i=maxtim_data;i!=0;i--) inb(CDi_status); -} -/*====================================================================*/ -/* - * CDi status loop for Teac CD-55A (Rob Riggs) - * - * This is needed because for some strange reason - * the CD-55A can take a real long time to give a - * status response. This seems to happen after we - * issue a READ command where a long seek is involved. - * - * I tried to ensure that we get max throughput with - * minimal busy waiting. We busy wait at first, then - * "switch gears" and start sleeping. We sleep for - * longer periods of time the longer we wait. - * - */ -static int CDi_stat_loop_T(void) -{ - int i, gear=1; - u_long timeout_1, timeout_2, timeout_3, timeout_4; - - timeout_1 = jiffies + HZ / 50; /* sbp_sleep(0) for a short period */ - timeout_2 = jiffies + HZ / 5; /* nap for no more than 200ms */ - timeout_3 = jiffies + 5 * HZ; /* sleep for up to 5s */ - timeout_4 = jiffies + 45 * HZ; /* long sleep for up to 45s. */ - do - { - i = inb(CDi_status); - if (!(i&s_not_data_ready)) return (i); - if (!(i&s_not_result_ready)) return (i); - switch(gear) - { - case 4: - sbp_sleep(HZ); - if (time_after(jiffies, timeout_4)) gear++; - msg(DBG_TEA, "CDi_stat_loop_T: long sleep active.\n"); - break; - case 3: - sbp_sleep(HZ/10); - if (time_after(jiffies, timeout_3)) gear++; - break; - case 2: - sbp_sleep(HZ/100); - if (time_after(jiffies, timeout_2)) gear++; - break; - case 1: - sbp_sleep(0); - if (time_after(jiffies, timeout_1)) gear++; - } - } while (gear < 5); - return -1; -} -/*==========================================================================*/ -static int CDi_stat_loop(void) -{ - int i,j; - - for(timeout = jiffies + 10*HZ, i=maxtim_data; time_before(jiffies, timeout); ) - { - for ( ;i!=0;i--) - { - j=inb(CDi_status); - if (!(j&s_not_data_ready)) return (j); - if (!(j&s_not_result_ready)) return (j); - if (fam0L_drive) if (j&s_attention) return (j); - } - sbp_sleep(1); - i = 1; - } - msg(DBG_LCS,"CDi_stat_loop failed in line %d\n", __LINE__); - return (-1); -} -/*==========================================================================*/ -#if 00000 -/*==========================================================================*/ -static int tst_DataReady(void) -{ - int i; - - i=inb(CDi_status); - if (i&s_not_data_ready) return (0); - return (1); -} -/*==========================================================================*/ -static int tst_ResultReady(void) -{ - int i; - - i=inb(CDi_status); - if (i&s_not_result_ready) return (0); - return (1); -} -/*==========================================================================*/ -static int tst_Attention(void) -{ - int i; - - i=inb(CDi_status); - if (i&s_attention) return (1); - return (0); -} -/*==========================================================================*/ -#endif -/*==========================================================================*/ -static int ResponseInfo(void) -{ - int i,j,st=0; - u_long timeout; - - for (i=0,timeout=jiffies+HZ;i<response_count;i++) - { - for (j=maxtim_data; ; ) - { - for ( ;j!=0;j-- ) - { - st=inb(CDi_status); - if (!(st&s_not_result_ready)) break; - } - if ((j!=0)||time_after_eq(jiffies, timeout)) break; - sbp_sleep(1); - j = 1; - } - if (time_after_eq(jiffies, timeout)) break; - infobuf[i]=inb(CDi_info); - } -#if 000 - while (!(inb(CDi_status)&s_not_result_ready)) - { - infobuf[i++]=inb(CDi_info); - } - j=i-response_count; - if (j>0) msg(DBG_INF,"ResponseInfo: got %d trailing bytes.\n",j); -#endif /* 000 */ - for (j=0;j<i;j++) - sprintf(&msgbuf[j*3]," %02X",infobuf[j]); - msgbuf[j*3]=0; - msg(DBG_CMD,"ResponseInfo:%s (%d,%d)\n",msgbuf,response_count,i); - j=response_count-i; - if (j>0) return (-j); - else return (i); -} -/*==========================================================================*/ -static void EvaluateStatus(int st) -{ - current_drive->status_bits=0; - if (fam1_drive) current_drive->status_bits=st|p_success; - else if (fam0_drive) - { - if (st&p_caddin_old) current_drive->status_bits |= p_door_closed|p_caddy_in; - if (st&p_spinning) current_drive->status_bits |= p_spinning; - if (st&p_check) current_drive->status_bits |= p_check; - if (st&p_success_old) current_drive->status_bits |= p_success; - if (st&p_busy_old) current_drive->status_bits |= p_busy_new; - if (st&p_disk_ok) current_drive->status_bits |= p_disk_ok; - } - else if (famLV_drive) - { - current_drive->status_bits |= p_success; - if (st&p_caddin_old) current_drive->status_bits |= p_disk_ok|p_caddy_in; - if (st&p_spinning) current_drive->status_bits |= p_spinning; - if (st&p_check) current_drive->status_bits |= p_check; - if (st&p_busy_old) current_drive->status_bits |= p_busy_new; - if (st&p_lcs_door_closed) current_drive->status_bits |= p_door_closed; - if (st&p_lcs_door_locked) current_drive->status_bits |= p_door_locked; - } - else if (fam2_drive) - { - current_drive->status_bits |= p_success; - if (st&p2_check) current_drive->status_bits |= p1_check; - if (st&p2_door_closed) current_drive->status_bits |= p1_door_closed; - if (st&p2_disk_in) current_drive->status_bits |= p1_disk_in; - if (st&p2_busy1) current_drive->status_bits |= p1_busy; - if (st&p2_busy2) current_drive->status_bits |= p1_busy; - if (st&p2_spinning) current_drive->status_bits |= p1_spinning; - if (st&p2_door_locked) current_drive->status_bits |= p1_door_locked; - if (st&p2_disk_ok) current_drive->status_bits |= p1_disk_ok; - } - else if (famT_drive) - { - return; /* still needs to get coded */ - current_drive->status_bits |= p_success; - if (st&p2_check) current_drive->status_bits |= p1_check; - if (st&p2_door_closed) current_drive->status_bits |= p1_door_closed; - if (st&p2_disk_in) current_drive->status_bits |= p1_disk_in; - if (st&p2_busy1) current_drive->status_bits |= p1_busy; - if (st&p2_busy2) current_drive->status_bits |= p1_busy; - if (st&p2_spinning) current_drive->status_bits |= p1_spinning; - if (st&p2_door_locked) current_drive->status_bits |= p1_door_locked; - if (st&p2_disk_ok) current_drive->status_bits |= p1_disk_ok; - } - return; -} -/*==========================================================================*/ -static int cmd_out_T(void); - -static int get_state_T(void) -{ - int i; - - clr_cmdbuf(); - current_drive->n_bytes=1; - drvcmd[0]=CMDT_STATUS; - i=cmd_out_T(); - if (i>=0) i=infobuf[0]; - else - { - msg(DBG_TEA,"get_state_T error %d\n", i); - return (i); - } - if (i>=0) - /* 2: closed, disk in */ - current_drive->status_bits=p1_door_closed|p1_disk_in|p1_spinning|p1_disk_ok; - else if (current_drive->error_state==6) - { - /* 3: closed, disk in, changed ("06 xx xx") */ - current_drive->status_bits=p1_door_closed|p1_disk_in; - current_drive->CD_changed=0xFF; - current_drive->diskstate_flags &= ~toc_bit; - } - else if ((current_drive->error_state!=2)||(current_drive->b3!=0x3A)||(current_drive->b4==0x00)) - { - /* 1: closed, no disk ("xx yy zz"or "02 3A 00") */ - current_drive->status_bits=p1_door_closed; - current_drive->open_count=0; - } - else if (current_drive->b4==0x01) - { - /* 0: open ("02 3A 01") */ - current_drive->status_bits=0; - current_drive->open_count=0; - } - else - { - /* 1: closed, no disk ("02 3A xx") */ - current_drive->status_bits=p1_door_closed; - current_drive->open_count=0; - } - return (current_drive->status_bits); -} -/*==========================================================================*/ -static int ResponseStatus(void) -{ - int i,j; - u_long timeout; - - msg(DBG_STA,"doing ResponseStatus...\n"); - if (famT_drive) return (get_state_T()); - if (flags_cmd_out & f_respo3) timeout = jiffies; - else if (flags_cmd_out & f_respo2) timeout = jiffies + 16*HZ; - else timeout = jiffies + 4*HZ; - j=maxtim_8; - do - { - for ( ;j!=0;j--) - { - i=inb(CDi_status); - if (!(i&s_not_result_ready)) break; - } - if ((j!=0)||time_after(jiffies, timeout)) break; - sbp_sleep(1); - j = 1; - } - while (1); - if (j==0) - { - if ((flags_cmd_out & f_respo3) == 0) - msg(DBG_STA,"ResponseStatus: timeout.\n"); - current_drive->status_bits=0; - return (-401); - } - i=inb(CDi_info); - msg(DBG_STA,"ResponseStatus: response %02X.\n", i); - EvaluateStatus(i); - msg(DBG_STA,"status_bits=%02X, i=%02X\n",current_drive->status_bits,i); - return (current_drive->status_bits); -} -/*==========================================================================*/ -static void cc_ReadStatus(void) -{ - int i; - - msg(DBG_STA,"giving cc_ReadStatus command\n"); - if (famT_drive) return; - SBPCD_CLI; - if (fam0LV_drive) OUT(CDo_command,CMD0_STATUS); - else if (fam1_drive) OUT(CDo_command,CMD1_STATUS); - else if (fam2_drive) OUT(CDo_command,CMD2_STATUS); - if (!fam0LV_drive) for (i=0;i<6;i++) OUT(CDo_command,0); - SBPCD_STI; -} -/*==========================================================================*/ -static int cc_ReadError(void) -{ - int i; - - clr_cmdbuf(); - msg(DBG_ERR,"giving cc_ReadError command.\n"); - if (fam1_drive) - { - drvcmd[0]=CMD1_READ_ERR; - response_count=8; - flags_cmd_out=f_putcmd|f_ResponseStatus; - } - else if (fam0LV_drive) - { - drvcmd[0]=CMD0_READ_ERR; - response_count=6; - if (famLV_drive) - flags_cmd_out=f_putcmd; - else - flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus; - } - else if (fam2_drive) - { - drvcmd[0]=CMD2_READ_ERR; - response_count=6; - flags_cmd_out=f_putcmd; - } - else if (famT_drive) - { - response_count=5; - drvcmd[0]=CMDT_READ_ERR; - } - i=cmd_out(); - current_drive->error_byte=0; - msg(DBG_ERR,"cc_ReadError: cmd_out(CMDx_READ_ERR) returns %d (%02X)\n",i,i); - if (i<0) return (i); - if (fam0V_drive) i=1; - else i=2; - current_drive->error_byte=infobuf[i]; - msg(DBG_ERR,"cc_ReadError: infobuf[%d] is %d (%02X)\n",i,current_drive->error_byte,current_drive->error_byte); - i=sta2err(infobuf[i]); - if (i==-ERR_DISKCHANGE) - { - current_drive->CD_changed=0xFF; - current_drive->diskstate_flags &= ~toc_bit; - } - return (i); -} -/*==========================================================================*/ -static int cc_DriveReset(void); - -static int cmd_out_T(void) -{ -#undef CMDT_TRIES -#define CMDT_TRIES 1000 -#define TEST_FALSE_FF 1 - - int i, j, l=0, m, ntries; - unsigned long flags; - - current_drive->error_state=0; - current_drive->b3=0; - current_drive->b4=0; - current_drive->f_drv_error=0; - for (i=0;i<10;i++) sprintf(&msgbuf[i*3]," %02X",drvcmd[i]); - msgbuf[i*3]=0; - msg(DBG_CMD,"cmd_out_T:%s\n",msgbuf); - - OUT(CDo_sel_i_d,0); - OUT(CDo_enable,current_drive->drv_sel); - i=inb(CDi_status); - do_16bit=0; - if ((f_16bit)&&(!(i&0x80))) - { - do_16bit=1; - msg(DBG_TEA,"cmd_out_T: do_16bit set.\n"); - } - if (!(i&s_not_result_ready)) - do - { - j=inb(CDi_info); - i=inb(CDi_status); - sbp_sleep(0); - msg(DBG_TEA,"cmd_out_T: spurious !s_not_result_ready. (%02X)\n", j); - } - while (!(i&s_not_result_ready)); - save_flags(flags); cli(); - for (i=0;i<10;i++) OUT(CDo_command,drvcmd[i]); - restore_flags(flags); - for (ntries=CMDT_TRIES;ntries>0;ntries--) - { - if (drvcmd[0]==CMDT_READ_VER) sbp_sleep(HZ); /* fixme */ -#if 01 - OUT(CDo_sel_i_d,1); -#endif /* 01 */ - if (teac==2) - { - if ((i=CDi_stat_loop_T()) == -1) break; - } - else - { -#if 0 - OUT(CDo_sel_i_d,1); -#endif /* 0 */ - i=inb(CDi_status); - } - if (!(i&s_not_data_ready)) /* f.e. CMDT_DISKINFO */ - { - OUT(CDo_sel_i_d,1); - if (drvcmd[0]==CMDT_READ) return (0); /* handled elsewhere */ - if (drvcmd[0]==CMDT_DISKINFO) - { - l=0; - do - { - if (do_16bit) - { - i=inw(CDi_data); - infobuf[l++]=i&0x0ff; - infobuf[l++]=i>>8; -#if TEST_FALSE_FF - if ((l==2)&&(infobuf[0]==0x0ff)) - { - infobuf[0]=infobuf[1]; - l=1; - msg(DBG_TEA,"cmd_out_T: do_16bit: false first byte!\n"); - } -#endif /* TEST_FALSE_FF */ - } - else infobuf[l++]=inb(CDi_data); - i=inb(CDi_status); - } - while (!(i&s_not_data_ready)); - for (j=0;j<l;j++) sprintf(&msgbuf[j*3]," %02X",infobuf[j]); - msgbuf[j*3]=0; - msg(DBG_CMD,"cmd_out_T data response:%s\n", msgbuf); - } - else - { - msg(DBG_TEA,"cmd_out_T: data response with cmd_%02X!\n", - drvcmd[0]); - j=0; - do - { - if (do_16bit) i=inw(CDi_data); - else i=inb(CDi_data); - j++; - i=inb(CDi_status); - } - while (!(i&s_not_data_ready)); - msg(DBG_TEA,"cmd_out_T: data response: discarded %d bytes/words.\n", j); - fatal_err++; - } - } - i=inb(CDi_status); - if (!(i&s_not_result_ready)) - { - OUT(CDo_sel_i_d,0); - if (drvcmd[0]==CMDT_DISKINFO) m=l; - else m=0; - do - { - infobuf[m++]=inb(CDi_info); - i=inb(CDi_status); - } - while (!(i&s_not_result_ready)); - for (j=0;j<m;j++) sprintf(&msgbuf[j*3]," %02X",infobuf[j]); - msgbuf[j*3]=0; - msg(DBG_CMD,"cmd_out_T info response:%s\n", msgbuf); - if (drvcmd[0]==CMDT_DISKINFO) - { - infobuf[0]=infobuf[l]; - if (infobuf[0]!=0x02) return (l); /* data length */ - } - else if (infobuf[0]!=0x02) return (m); /* info length */ - do - { - ++recursion; - if (recursion>1) msg(DBG_TEA,"cmd_out_T READ_ERR recursion (%02X): %d !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n", drvcmd[0], recursion); - clr_cmdbuf(); - drvcmd[0]=CMDT_READ_ERR; - j=cmd_out_T(); /* !!! recursive here !!! */ - --recursion; - sbp_sleep(1); - } - while (j<0); - current_drive->error_state=infobuf[2]; - current_drive->b3=infobuf[3]; - current_drive->b4=infobuf[4]; - if (current_drive->f_drv_error) - { - current_drive->f_drv_error=0; - cc_DriveReset(); - current_drive->error_state=2; - } - return (-current_drive->error_state-400); - } - if (drvcmd[0]==CMDT_READ) return (0); /* handled elsewhere */ - if ((teac==0)||(ntries<(CMDT_TRIES-5))) sbp_sleep(HZ/10); - else sbp_sleep(HZ/100); - if (ntries>(CMDT_TRIES-50)) continue; - msg(DBG_TEA,"cmd_out_T: next CMDT_TRIES (%02X): %d.\n", drvcmd[0], ntries-1); - } - current_drive->f_drv_error=1; - cc_DriveReset(); - current_drive->error_state=2; - return (-99); -} -/*==========================================================================*/ -static int cmd_out(void) -{ - int i=0; - - if (famT_drive) return(cmd_out_T()); - - if (flags_cmd_out&f_putcmd) - { - unsigned long flags; - for (i=0;i<7;i++) - sprintf(&msgbuf[i*3], " %02X", drvcmd[i]); - msgbuf[i*3]=0; - msg(DBG_CMD,"cmd_out:%s\n", msgbuf); - save_flags(flags); cli(); - for (i=0;i<7;i++) OUT(CDo_command,drvcmd[i]); - restore_flags(flags); - } - if (response_count!=0) - { - if (cmd_type!=0) - { - if (sbpro_type==1) OUT(CDo_sel_i_d,1); - msg(DBG_INF,"misleaded to try ResponseData.\n"); - if (sbpro_type==1) OUT(CDo_sel_i_d,0); - return (-22); - } - else i=ResponseInfo(); - if (i<0) return (i); - } - if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to CDi_stat_loop.\n"); - if (flags_cmd_out&f_lopsta) - { - i=CDi_stat_loop(); - if ((i<0)||!(i&s_attention)) return (-8); - } - if (!(flags_cmd_out&f_getsta)) goto LOC_229; - - LOC_228: - if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cc_ReadStatus.\n"); - cc_ReadStatus(); - - LOC_229: - if (flags_cmd_out&f_ResponseStatus) - { - if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to ResponseStatus.\n"); - i=ResponseStatus(); - /* builds status_bits, returns orig. status or p_busy_new */ - if (i<0) return (i); - if (flags_cmd_out&(f_bit1|f_wait_if_busy)) - { - if (!st_check) - { - if ((flags_cmd_out&f_bit1)&&(i&p_success)) goto LOC_232; - if ((!(flags_cmd_out&f_wait_if_busy))||(!st_busy)) goto LOC_228; - } - } - } - LOC_232: - if (!(flags_cmd_out&f_obey_p_check)) return (0); - if (!st_check) return (0); - if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cc_ReadError.\n"); - i=cc_ReadError(); - if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cmd_out OK.\n"); - msg(DBG_000,"cmd_out: cc_ReadError=%d\n", i); - return (i); -} -/*==========================================================================*/ -static int cc_Seek(u_int pos, char f_blk_msf) -{ - int i; - - clr_cmdbuf(); - if (f_blk_msf>1) return (-3); - if (fam0V_drive) - { - drvcmd[0]=CMD0_SEEK; - if (f_blk_msf==1) pos=msf2blk(pos); - drvcmd[2]=(pos>>16)&0x00FF; - drvcmd[3]=(pos>>8)&0x00FF; - drvcmd[4]=pos&0x00FF; - if (fam0_drive) - flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta | - f_ResponseStatus | f_obey_p_check | f_bit1; - else - flags_cmd_out = f_putcmd; - } - else if (fam1L_drive) - { - drvcmd[0]=CMD1_SEEK; /* same as CMD1_ and CMDL_ */ - if (f_blk_msf==0) pos=blk2msf(pos); - drvcmd[1]=(pos>>16)&0x00FF; - drvcmd[2]=(pos>>8)&0x00FF; - drvcmd[3]=pos&0x00FF; - if (famL_drive) - flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1; - else - flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check; - } - else if (fam2_drive) - { - drvcmd[0]=CMD2_SEEK; - if (f_blk_msf==0) pos=blk2msf(pos); - drvcmd[2]=(pos>>24)&0x00FF; - drvcmd[3]=(pos>>16)&0x00FF; - drvcmd[4]=(pos>>8)&0x00FF; - drvcmd[5]=pos&0x00FF; - flags_cmd_out=f_putcmd|f_ResponseStatus; - } - else if (famT_drive) - { - drvcmd[0]=CMDT_SEEK; - if (f_blk_msf==1) pos=msf2blk(pos); - drvcmd[2]=(pos>>24)&0x00FF; - drvcmd[3]=(pos>>16)&0x00FF; - drvcmd[4]=(pos>>8)&0x00FF; - drvcmd[5]=pos&0x00FF; - current_drive->n_bytes=1; - } - response_count=0; - i=cmd_out(); - return (i); -} -/*==========================================================================*/ -static int cc_SpinUp(void) -{ - int i; - - msg(DBG_SPI,"SpinUp.\n"); - current_drive->in_SpinUp = 1; - clr_cmdbuf(); - if (fam0LV_drive) - { - drvcmd[0]=CMD0_SPINUP; - if (fam0L_drive) - flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta| - f_ResponseStatus|f_obey_p_check|f_bit1; - else - flags_cmd_out=f_putcmd; - } - else if (fam1_drive) - { - drvcmd[0]=CMD1_SPINUP; - flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check; - } - else if (fam2_drive) - { - drvcmd[0]=CMD2_TRAY_CTL; - drvcmd[4]=0x01; /* "spinup" */ - flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check; - } - else if (famT_drive) - { - drvcmd[0]=CMDT_TRAY_CTL; - drvcmd[4]=0x03; /* "insert", it hopefully spins the drive up */ - } - response_count=0; - i=cmd_out(); - current_drive->in_SpinUp = 0; - return (i); -} -/*==========================================================================*/ -static int cc_SpinDown(void) -{ - int i; - - if (fam0_drive) return (0); - clr_cmdbuf(); - response_count=0; - if (fam1_drive) - { - drvcmd[0]=CMD1_SPINDOWN; - flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check; - } - else if (fam2_drive) - { - drvcmd[0]=CMD2_TRAY_CTL; - drvcmd[4]=0x02; /* "eject" */ - flags_cmd_out=f_putcmd|f_ResponseStatus; - } - else if (famL_drive) - { - drvcmd[0]=CMDL_SPINDOWN; - drvcmd[1]=1; - flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1; - } - else if (famV_drive) - { - drvcmd[0]=CMDV_SPINDOWN; - flags_cmd_out=f_putcmd; - } - else if (famT_drive) - { - drvcmd[0]=CMDT_TRAY_CTL; - drvcmd[4]=0x02; /* "eject" */ - } - i=cmd_out(); - return (i); -} -/*==========================================================================*/ -static int cc_get_mode_T(void) -{ - int i; - - clr_cmdbuf(); - response_count=10; - drvcmd[0]=CMDT_GETMODE; - drvcmd[4]=response_count; - i=cmd_out_T(); - return (i); -} -/*==========================================================================*/ -static int cc_set_mode_T(void) -{ - int i; - - clr_cmdbuf(); - response_count=1; - drvcmd[0]=CMDT_SETMODE; - drvcmd[1]=current_drive->speed_byte; - drvcmd[2]=current_drive->frmsiz>>8; - drvcmd[3]=current_drive->frmsiz&0x0FF; - drvcmd[4]=current_drive->f_XA; /* 1: XA */ - drvcmd[5]=current_drive->type_byte; /* 0, 1, 3 */ - drvcmd[6]=current_drive->mode_xb_6; - drvcmd[7]=current_drive->mode_yb_7|current_drive->volume_control; - drvcmd[8]=current_drive->mode_xb_8; - drvcmd[9]=current_drive->delay; - i=cmd_out_T(); - return (i); -} -/*==========================================================================*/ -static int cc_prep_mode_T(void) -{ - int i, j; - - i=cc_get_mode_T(); - if (i<0) return (i); - for (i=0;i<10;i++) - sprintf(&msgbuf[i*3], " %02X", infobuf[i]); - msgbuf[i*3]=0; - msg(DBG_TEA,"CMDT_GETMODE:%s\n", msgbuf); - current_drive->speed_byte=0x02; /* 0x02: auto quad, 0x82: quad, 0x81: double, 0x80: single */ - current_drive->frmsiz=make16(infobuf[2],infobuf[3]); - current_drive->f_XA=infobuf[4]; - if (current_drive->f_XA==0) current_drive->type_byte=0; - else current_drive->type_byte=1; - current_drive->mode_xb_6=infobuf[6]; - current_drive->mode_yb_7=1; - current_drive->mode_xb_8=infobuf[8]; - current_drive->delay=0; /* 0, 1, 2, 3 */ - j=cc_set_mode_T(); - i=cc_get_mode_T(); - for (i=0;i<10;i++) - sprintf(&msgbuf[i*3], " %02X", infobuf[i]); - msgbuf[i*3]=0; - msg(DBG_TEA,"CMDT_GETMODE:%s\n", msgbuf); - return (j); -} -/*==========================================================================*/ -static int cc_SetSpeed(u_char speed, u_char x1, u_char x2) -{ - int i; - - if (fam0LV_drive) return (0); - clr_cmdbuf(); - response_count=0; - if (fam1_drive) - { - drvcmd[0]=CMD1_SETMODE; - drvcmd[1]=0x03; - drvcmd[2]=speed; - drvcmd[3]=x1; - drvcmd[4]=x2; - flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; - } - else if (fam2_drive) - { - drvcmd[0]=CMD2_SETSPEED; - if (speed&speed_auto) - { - drvcmd[2]=0xFF; - drvcmd[3]=0xFF; - } - else - { - drvcmd[2]=0; - drvcmd[3]=150; - } - flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; - } - else if (famT_drive) - { - return (0); - } - i=cmd_out(); - return (i); -} -/*==========================================================================*/ -static int cc_SetVolume(void) -{ - int i; - u_char channel0,channel1,volume0,volume1; - u_char control0,value0,control1,value1; - - current_drive->diskstate_flags &= ~volume_bit; - clr_cmdbuf(); - channel0=current_drive->vol_chan0; - volume0=current_drive->vol_ctrl0; - channel1=control1=current_drive->vol_chan1; - volume1=value1=current_drive->vol_ctrl1; - control0=value0=0; - - if (famV_drive) return (0); - - if (((current_drive->drv_options&audio_mono)!=0)&&(current_drive->drv_type>=drv_211)) - { - if ((volume0!=0)&&(volume1==0)) - { - volume1=volume0; - channel1=channel0; - } - else if ((volume0==0)&&(volume1!=0)) - { - volume0=volume1; - channel0=channel1; - } - } - if (channel0>1) - { - channel0=0; - volume0=0; - } - if (channel1>1) - { - channel1=1; - volume1=0; - } - - if (fam1_drive) - { - control0=channel0+1; - control1=channel1+1; - value0=(volume0>volume1)?volume0:volume1; - value1=value0; - if (volume0==0) control0=0; - if (volume1==0) control1=0; - drvcmd[0]=CMD1_SETMODE; - drvcmd[1]=0x05; - drvcmd[3]=control0; - drvcmd[4]=value0; - drvcmd[5]=control1; - drvcmd[6]=value1; - flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; - } - else if (fam2_drive) - { - control0=channel0+1; - control1=channel1+1; - value0=(volume0>volume1)?volume0:volume1; - value1=value0; - if (volume0==0) control0=0; - if (volume1==0) control1=0; - drvcmd[0]=CMD2_SETMODE; - drvcmd[1]=0x0E; - drvcmd[3]=control0; - drvcmd[4]=value0; - drvcmd[5]=control1; - drvcmd[6]=value1; - flags_cmd_out=f_putcmd|f_ResponseStatus; - } - else if (famL_drive) - { - if ((volume0==0)||(channel0!=0)) control0 |= 0x80; - if ((volume1==0)||(channel1!=1)) control0 |= 0x40; - if (volume0|volume1) value0=0x80; - drvcmd[0]=CMDL_SETMODE; - drvcmd[1]=0x03; - drvcmd[4]=control0; - drvcmd[5]=value0; - flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1; - } - else if (fam0_drive) /* different firmware levels */ - { - if (current_drive->drv_type>=drv_300) - { - control0=volume0&0xFC; - value0=volume1&0xFC; - if ((volume0!=0)&&(volume0<4)) control0 |= 0x04; - if ((volume1!=0)&&(volume1<4)) value0 |= 0x04; - if (channel0!=0) control0 |= 0x01; - if (channel1==1) value0 |= 0x01; - } - else - { - value0=(volume0>volume1)?volume0:volume1; - if (current_drive->drv_type<drv_211) - { - if (channel0!=0) - { - i=channel1; - channel1=channel0; - channel0=i; - i=volume1; - volume1=volume0; - volume0=i; - } - if (channel0==channel1) - { - if (channel0==0) - { - channel1=1; - volume1=0; - volume0=value0; - } - else - { - channel0=0; - volume0=0; - volume1=value0; - } - } - } - - if ((volume0!=0)&&(volume1!=0)) - { - if (volume0==0xFF) volume1=0xFF; - else if (volume1==0xFF) volume0=0xFF; - } - else if (current_drive->drv_type<drv_201) volume0=volume1=value0; - - if (current_drive->drv_type>=drv_201) - { - if (volume0==0) control0 |= 0x80; - if (volume1==0) control0 |= 0x40; - } - if (current_drive->drv_type>=drv_211) - { - if (channel0!=0) control0 |= 0x20; - if (channel1!=1) control0 |= 0x10; - } - } - drvcmd[0]=CMD0_SETMODE; - drvcmd[1]=0x83; - drvcmd[4]=control0; - drvcmd[5]=value0; - flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; - } - else if (famT_drive) - { - current_drive->volume_control=0; - if (!volume0) current_drive->volume_control|=0x10; - if (!volume1) current_drive->volume_control|=0x20; - i=cc_prep_mode_T(); - if (i<0) return (i); - } - if (!famT_drive) - { - response_count=0; - i=cmd_out(); - if (i<0) return (i); - } - current_drive->diskstate_flags |= volume_bit; - return (0); -} -/*==========================================================================*/ -static int GetStatus(void) -{ - int i; - - if (famT_drive) return (0); - flags_cmd_out=f_getsta|f_ResponseStatus|f_obey_p_check; - response_count=0; - cmd_type=0; - i=cmd_out(); - return (i); -} -/*==========================================================================*/ -static int cc_DriveReset(void) -{ - int i; - - msg(DBG_RES,"cc_DriveReset called.\n"); - clr_cmdbuf(); - response_count=0; - if (fam0LV_drive) OUT(CDo_reset,0x00); - else if (fam1_drive) - { - drvcmd[0]=CMD1_RESET; - flags_cmd_out=f_putcmd; - i=cmd_out(); - } - else if (fam2_drive) - { - drvcmd[0]=CMD2_RESET; - flags_cmd_out=f_putcmd; - i=cmd_out(); - OUT(CDo_reset,0x00); - } - else if (famT_drive) - { - OUT(CDo_sel_i_d,0); - OUT(CDo_enable,current_drive->drv_sel); - OUT(CDo_command,CMDT_RESET); - for (i=1;i<10;i++) OUT(CDo_command,0); - } - if (fam0LV_drive) sbp_sleep(5*HZ); /* wait 5 seconds */ - else sbp_sleep(1*HZ); /* wait a second */ -#if 1 - if (famT_drive) - { - msg(DBG_TEA, "================CMDT_RESET given=================.\n"); - sbp_sleep(3*HZ); - } -#endif /* 1 */ - flush_status(); - i=GetStatus(); - if (i<0) return i; - if (!famT_drive) - if (current_drive->error_byte!=aud_12) return -501; - return (0); -} - -/*==========================================================================*/ -static int SetSpeed(void) -{ - int i, speed; - - if (!(current_drive->drv_options&(speed_auto|speed_300|speed_150))) return (0); - speed=speed_auto; - if (!(current_drive->drv_options&speed_auto)) - { - speed |= speed_300; - if (!(current_drive->drv_options&speed_300)) speed=0; - } - i=cc_SetSpeed(speed,0,0); - return (i); -} - -static void switch_drive(struct sbpcd_drive *); - -static int sbpcd_select_speed(struct cdrom_device_info *cdi, int speed) -{ - struct sbpcd_drive *p = cdi->handle; - if (p != current_drive) - switch_drive(p); - - return cc_SetSpeed(speed == 2 ? speed_300 : speed_150, 0, 0); -} - -/*==========================================================================*/ -static int DriveReset(void) -{ - int i; - - i=cc_DriveReset(); - if (i<0) return (-22); - do - { - i=GetStatus(); - if ((i<0)&&(i!=-ERR_DISKCHANGE)) { - return (-2); /* from sta2err */ - } - if (!st_caddy_in) break; - sbp_sleep(1); - } - while (!st_diskok); -#if 000 - current_drive->CD_changed=1; -#endif - if ((st_door_closed) && (st_caddy_in)) - { - i=DiskInfo(); - if (i<0) return (-23); - } - return (0); -} - -static int sbpcd_reset(struct cdrom_device_info *cdi) -{ - struct sbpcd_drive *p = cdi->handle; - if (p != current_drive) - switch_drive(p); - return DriveReset(); -} - -/*==========================================================================*/ -static int cc_PlayAudio(int pos_audio_start,int pos_audio_end) -{ - int i, j, n; - - if (current_drive->audio_state==audio_playing) return (-EINVAL); - clr_cmdbuf(); - response_count=0; - if (famLV_drive) - { - drvcmd[0]=CMDL_PLAY; - i=msf2blk(pos_audio_start); - n=msf2blk(pos_audio_end)+1-i; - drvcmd[1]=(i>>16)&0x00FF; - drvcmd[2]=(i>>8)&0x00FF; - drvcmd[3]=i&0x00FF; - drvcmd[4]=(n>>16)&0x00FF; - drvcmd[5]=(n>>8)&0x00FF; - drvcmd[6]=n&0x00FF; - if (famL_drive) - flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta | - f_ResponseStatus | f_obey_p_check | f_wait_if_busy; - else - flags_cmd_out = f_putcmd; - } - else - { - j=1; - if (fam1_drive) - { - drvcmd[0]=CMD1_PLAY_MSF; - flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | - f_obey_p_check | f_wait_if_busy; - } - else if (fam2_drive) - { - drvcmd[0]=CMD2_PLAY_MSF; - flags_cmd_out = f_putcmd | f_ResponseStatus | f_obey_p_check; - } - else if (famT_drive) - { - drvcmd[0]=CMDT_PLAY_MSF; - j=3; - response_count=1; - } - else if (fam0_drive) - { - drvcmd[0]=CMD0_PLAY_MSF; - flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta | - f_ResponseStatus | f_obey_p_check | f_wait_if_busy; - } - drvcmd[j]=(pos_audio_start>>16)&0x00FF; - drvcmd[j+1]=(pos_audio_start>>8)&0x00FF; - drvcmd[j+2]=pos_audio_start&0x00FF; - drvcmd[j+3]=(pos_audio_end>>16)&0x00FF; - drvcmd[j+4]=(pos_audio_end>>8)&0x00FF; - drvcmd[j+5]=pos_audio_end&0x00FF; - } - i=cmd_out(); - return (i); -} -/*==========================================================================*/ -static int cc_Pause_Resume(int pau_res) -{ - int i; - - clr_cmdbuf(); - response_count=0; - if (fam1_drive) - { - drvcmd[0]=CMD1_PAU_RES; - if (pau_res!=1) drvcmd[1]=0x80; - flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check; - } - else if (fam2_drive) - { - drvcmd[0]=CMD2_PAU_RES; - if (pau_res!=1) drvcmd[2]=0x01; - flags_cmd_out=f_putcmd|f_ResponseStatus; - } - else if (fam0LV_drive) - { - drvcmd[0]=CMD0_PAU_RES; - if (pau_res!=1) drvcmd[1]=0x80; - if (famL_drive) - flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus| - f_obey_p_check|f_bit1; - else if (famV_drive) - flags_cmd_out=f_putcmd; - else - flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus| - f_obey_p_check; - } - else if (famT_drive) - { - if (pau_res==3) return (cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end)); - else if (pau_res==1) drvcmd[0]=CMDT_PAUSE; - else return (-56); - } - i=cmd_out(); - return (i); -} -/*==========================================================================*/ -static int cc_LockDoor(char lock) -{ - int i; - - if (fam0_drive) return (0); - msg(DBG_LCK,"cc_LockDoor: %d (drive %d)\n", lock, current_drive - D_S); - msg(DBG_LCS,"p_door_locked bit %d before\n", st_door_locked); - clr_cmdbuf(); - response_count=0; - if (fam1_drive) - { - drvcmd[0]=CMD1_LOCK_CTL; - if (lock==1) drvcmd[1]=0x01; - flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; - } - else if (fam2_drive) - { - drvcmd[0]=CMD2_LOCK_CTL; - if (lock==1) drvcmd[4]=0x01; - flags_cmd_out=f_putcmd|f_ResponseStatus; - } - else if (famLV_drive) - { - drvcmd[0]=CMDL_LOCK_CTL; - if (lock==1) drvcmd[1]=0x01; - if (famL_drive) - flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1; - else - flags_cmd_out=f_putcmd; - } - else if (famT_drive) - { - drvcmd[0]=CMDT_LOCK_CTL; - if (lock==1) drvcmd[4]=0x01; - } - i=cmd_out(); - msg(DBG_LCS,"p_door_locked bit %d after\n", st_door_locked); - return (i); -} -/*==========================================================================*/ -/*==========================================================================*/ -static int UnLockDoor(void) -{ - int i,j; - - j=20; - do - { - i=cc_LockDoor(0); - --j; - sbp_sleep(1); - } - while ((i<0)&&(j)); - if (i<0) - { - cc_DriveReset(); - return -84; - } - return (0); -} -/*==========================================================================*/ -static int LockDoor(void) -{ - int i,j; - - j=20; - do - { - i=cc_LockDoor(1); - --j; - sbp_sleep(1); - } - while ((i<0)&&(j)); - if (j==0) - { - cc_DriveReset(); - j=20; - do - { - i=cc_LockDoor(1); - --j; - sbp_sleep(1); - } - while ((i<0)&&(j)); - } - return (i); -} - -static int sbpcd_lock_door(struct cdrom_device_info *cdi, int lock) -{ - return lock ? LockDoor() : UnLockDoor(); -} - -/*==========================================================================*/ -static int cc_CloseTray(void) -{ - int i; - - if (fam0_drive) return (0); - msg(DBG_LCK,"cc_CloseTray (drive %d)\n", current_drive - D_S); - msg(DBG_LCS,"p_door_closed bit %d before\n", st_door_closed); - - clr_cmdbuf(); - response_count=0; - if (fam1_drive) - { - drvcmd[0]=CMD1_TRAY_CTL; - flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check; - } - else if (fam2_drive) - { - drvcmd[0]=CMD2_TRAY_CTL; - drvcmd[1]=0x01; - drvcmd[4]=0x03; /* "insert" */ - flags_cmd_out=f_putcmd|f_ResponseStatus; - } - else if (famLV_drive) - { - drvcmd[0]=CMDL_TRAY_CTL; - if (famLV_drive) - flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta| - f_ResponseStatus|f_obey_p_check|f_bit1; - else - flags_cmd_out=f_putcmd; - } - else if (famT_drive) - { - drvcmd[0]=CMDT_TRAY_CTL; - drvcmd[4]=0x03; /* "insert" */ - } - i=cmd_out(); - msg(DBG_LCS,"p_door_closed bit %d after\n", st_door_closed); - - i=cc_ReadError(); - flags_cmd_out |= f_respo2; - cc_ReadStatus(); /* command: give 1-byte status */ - i=ResponseStatus(); - if (famT_drive&&(i<0)) - { - cc_DriveReset(); - i=ResponseStatus(); -#if 0 - sbp_sleep(HZ); -#endif /* 0 */ - i=ResponseStatus(); - } - if (i<0) - { - msg(DBG_INF,"sbpcd cc_CloseTray: ResponseStatus timed out (%d).\n",i); - } - if (!(famT_drive)) - { - if (!st_spinning) - { - cc_SpinUp(); - if (st_check) i=cc_ReadError(); - flags_cmd_out |= f_respo2; - cc_ReadStatus(); - i=ResponseStatus(); - } else { - } - } - i=DiskInfo(); - return (i); -} - -static int sbpcd_tray_move(struct cdrom_device_info *cdi, int position) -{ - int retval=0; - switch_drive(cdi->handle); - /* DUH! --AJK */ - if(current_drive->CD_changed != 0xFF) { - current_drive->CD_changed=0xFF; - current_drive->diskstate_flags &= ~cd_size_bit; - } - if (position == 1) { - cc_SpinDown(); - } else { - retval=cc_CloseTray(); - } - return retval; -} - -/*==========================================================================*/ -static int cc_ReadSubQ(void) -{ - int i,j; - - current_drive->diskstate_flags &= ~subq_bit; - for (j=255;j>0;j--) - { - clr_cmdbuf(); - if (fam1_drive) - { - drvcmd[0]=CMD1_READSUBQ; - flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; - response_count=11; - } - else if (fam2_drive) - { - drvcmd[0]=CMD2_READSUBQ; - drvcmd[1]=0x02; - drvcmd[3]=0x01; - flags_cmd_out=f_putcmd; - response_count=10; - } - else if (fam0LV_drive) - { - drvcmd[0]=CMD0_READSUBQ; - drvcmd[1]=0x02; - if (famLV_drive) - flags_cmd_out=f_putcmd; - else - flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; - response_count=13; - } - else if (famT_drive) - { - response_count=12; - drvcmd[0]=CMDT_READSUBQ; - drvcmd[1]=0x02; - drvcmd[2]=0x40; - drvcmd[3]=0x01; - drvcmd[8]=response_count; - } - i=cmd_out(); - if (i<0) return (i); - for (i=0;i<response_count;i++) - { - sprintf(&msgbuf[i*3], " %02X", infobuf[i]); - msgbuf[i*3]=0; - msg(DBG_SQ1,"cc_ReadSubQ:%s\n", msgbuf); - } - if (famT_drive) break; - if (infobuf[0]!=0) break; - if ((!st_spinning) || (j==1)) - { - current_drive->SubQ_ctl_adr=current_drive->SubQ_trk=current_drive->SubQ_pnt_idx=current_drive->SubQ_whatisthis=0; - current_drive->SubQ_run_tot=current_drive->SubQ_run_trk=0; - return (0); - } - } - if (famT_drive) current_drive->SubQ_ctl_adr=infobuf[1]; - else current_drive->SubQ_ctl_adr=swap_nibbles(infobuf[1]); - current_drive->SubQ_trk=byt2bcd(infobuf[2]); - current_drive->SubQ_pnt_idx=byt2bcd(infobuf[3]); - if (fam0LV_drive) i=5; - else if (fam12_drive) i=4; - else if (famT_drive) i=8; - current_drive->SubQ_run_tot=make32(make16(0,infobuf[i]),make16(infobuf[i+1],infobuf[i+2])); /* msf-bin */ - i=7; - if (fam0LV_drive) i=9; - else if (fam12_drive) i=7; - else if (famT_drive) i=4; - current_drive->SubQ_run_trk=make32(make16(0,infobuf[i]),make16(infobuf[i+1],infobuf[i+2])); /* msf-bin */ - current_drive->SubQ_whatisthis=infobuf[i+3]; - current_drive->diskstate_flags |= subq_bit; - return (0); -} -/*==========================================================================*/ -static int cc_ModeSense(void) -{ - int i; - - if (fam2_drive) return (0); - if (famV_drive) return (0); - current_drive->diskstate_flags &= ~frame_size_bit; - clr_cmdbuf(); - if (fam1_drive) - { - response_count=5; - drvcmd[0]=CMD1_GETMODE; - flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; - } - else if (fam0L_drive) - { - response_count=2; - drvcmd[0]=CMD0_GETMODE; - if (famL_drive) flags_cmd_out=f_putcmd; - else flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; - } - else if (famT_drive) - { - response_count=10; - drvcmd[0]=CMDT_GETMODE; - drvcmd[4]=response_count; - } - i=cmd_out(); - if (i<0) return (i); - i=0; - current_drive->sense_byte=0; - if (fam1_drive) current_drive->sense_byte=infobuf[i++]; - else if (famT_drive) - { - if (infobuf[4]==0x01) current_drive->xa_byte=0x20; - else current_drive->xa_byte=0; - i=2; - } - current_drive->frame_size=make16(infobuf[i],infobuf[i+1]); - for (i=0;i<response_count;i++) - sprintf(&msgbuf[i*3], " %02X", infobuf[i]); - msgbuf[i*3]=0; - msg(DBG_XA1,"cc_ModeSense:%s\n", msgbuf); - - current_drive->diskstate_flags |= frame_size_bit; - return (0); -} -/*==========================================================================*/ -/*==========================================================================*/ -static int cc_ModeSelect(int framesize) -{ - int i; - - if (fam2_drive) return (0); - if (famV_drive) return (0); - current_drive->diskstate_flags &= ~frame_size_bit; - clr_cmdbuf(); - current_drive->frame_size=framesize; - if (framesize==CD_FRAMESIZE_RAW) current_drive->sense_byte=0x82; - else current_drive->sense_byte=0x00; - - msg(DBG_XA1,"cc_ModeSelect: %02X %04X\n", - current_drive->sense_byte, current_drive->frame_size); - - if (fam1_drive) - { - drvcmd[0]=CMD1_SETMODE; - drvcmd[1]=0x00; - drvcmd[2]=current_drive->sense_byte; - drvcmd[3]=(current_drive->frame_size>>8)&0xFF; - drvcmd[4]=current_drive->frame_size&0xFF; - flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; - } - else if (fam0L_drive) - { - drvcmd[0]=CMD0_SETMODE; - drvcmd[1]=0x00; - drvcmd[2]=(current_drive->frame_size>>8)&0xFF; - drvcmd[3]=current_drive->frame_size&0xFF; - drvcmd[4]=0x00; - if(famL_drive) - flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check; - else - flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; - } - else if (famT_drive) - { - return (-1); - } - response_count=0; - i=cmd_out(); - if (i<0) return (i); - current_drive->diskstate_flags |= frame_size_bit; - return (0); -} -/*==========================================================================*/ -static int cc_GetVolume(void) -{ - int i; - u_char switches; - u_char chan0=0; - u_char vol0=0; - u_char chan1=1; - u_char vol1=0; - - if (famV_drive) return (0); - current_drive->diskstate_flags &= ~volume_bit; - clr_cmdbuf(); - if (fam1_drive) - { - drvcmd[0]=CMD1_GETMODE; - drvcmd[1]=0x05; - response_count=5; - flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; - } - else if (fam2_drive) - { - drvcmd[0]=CMD2_GETMODE; - drvcmd[1]=0x0E; - response_count=5; - flags_cmd_out=f_putcmd; - } - else if (fam0L_drive) - { - drvcmd[0]=CMD0_GETMODE; - drvcmd[1]=0x03; - response_count=2; - if(famL_drive) - flags_cmd_out=f_putcmd; - else - flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; - } - else if (famT_drive) - { - i=cc_get_mode_T(); - if (i<0) return (i); - } - if (!famT_drive) - { - i=cmd_out(); - if (i<0) return (i); - } - if (fam1_drive) - { - chan0=infobuf[1]&0x0F; - vol0=infobuf[2]; - chan1=infobuf[3]&0x0F; - vol1=infobuf[4]; - if (chan0==0) - { - chan0=1; - vol0=0; - } - if (chan1==0) - { - chan1=2; - vol1=0; - } - chan0 >>= 1; - chan1 >>= 1; - } - else if (fam2_drive) - { - chan0=infobuf[1]; - vol0=infobuf[2]; - chan1=infobuf[3]; - vol1=infobuf[4]; - } - else if (famL_drive) - { - chan0=0; - chan1=1; - vol0=vol1=infobuf[1]; - switches=infobuf[0]; - if ((switches&0x80)!=0) chan0=1; - if ((switches&0x40)!=0) chan1=0; - } - else if (fam0_drive) /* different firmware levels */ - { - chan0=0; - chan1=1; - vol0=vol1=infobuf[1]; - if (current_drive->drv_type>=drv_201) - { - if (current_drive->drv_type<drv_300) - { - switches=infobuf[0]; - if ((switches&0x80)!=0) vol0=0; - if ((switches&0x40)!=0) vol1=0; - if (current_drive->drv_type>=drv_211) - { - if ((switches&0x20)!=0) chan0=1; - if ((switches&0x10)!=0) chan1=0; - } - } - else - { - vol0=infobuf[0]; - if ((vol0&0x01)!=0) chan0=1; - if ((vol1&0x01)==0) chan1=0; - vol0 &= 0xFC; - vol1 &= 0xFC; - if (vol0!=0) vol0 += 3; - if (vol1!=0) vol1 += 3; - } - } - } - else if (famT_drive) - { - current_drive->volume_control=infobuf[7]; - chan0=0; - chan1=1; - if (current_drive->volume_control&0x10) vol0=0; - else vol0=0xff; - if (current_drive->volume_control&0x20) vol1=0; - else vol1=0xff; - } - current_drive->vol_chan0=chan0; - current_drive->vol_ctrl0=vol0; - current_drive->vol_chan1=chan1; - current_drive->vol_ctrl1=vol1; -#if 000 - current_drive->vol_chan2=2; - current_drive->vol_ctrl2=0xFF; - current_drive->vol_chan3=3; - current_drive->vol_ctrl3=0xFF; -#endif /* 000 */ - current_drive->diskstate_flags |= volume_bit; - return (0); -} -/*==========================================================================*/ -static int cc_ReadCapacity(void) -{ - int i, j; - - if (fam2_drive) return (0); /* some firmware lacks this command */ - if (famLV_drive) return (0); /* some firmware lacks this command */ - if (famT_drive) return (0); /* done with cc_ReadTocDescr() */ - current_drive->diskstate_flags &= ~cd_size_bit; - for (j=3;j>0;j--) - { - clr_cmdbuf(); - if (fam1_drive) - { - drvcmd[0]=CMD1_CAPACITY; - response_count=5; - flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; - } -#if 00 - else if (fam2_drive) - { - drvcmd[0]=CMD2_CAPACITY; - response_count=8; - flags_cmd_out=f_putcmd; - } -#endif - else if (fam0_drive) - { - drvcmd[0]=CMD0_CAPACITY; - response_count=5; - flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; - } - i=cmd_out(); - if (i>=0) break; - msg(DBG_000,"cc_ReadCapacity: cmd_out: err %d\n", i); - cc_ReadError(); - } - if (j==0) return (i); - if (fam1_drive) current_drive->CDsize_frm=msf2blk(make32(make16(0,infobuf[0]),make16(infobuf[1],infobuf[2])))+CD_MSF_OFFSET; - else if (fam0_drive) current_drive->CDsize_frm=make32(make16(0,infobuf[0]),make16(infobuf[1],infobuf[2])); -#if 00 - else if (fam2_drive) current_drive->CDsize_frm=make32(make16(infobuf[0],infobuf[1]),make16(infobuf[2],infobuf[3])); -#endif - current_drive->diskstate_flags |= cd_size_bit; - msg(DBG_000,"cc_ReadCapacity: %d frames.\n", current_drive->CDsize_frm); - return (0); -} -/*==========================================================================*/ -static int cc_ReadTocDescr(void) -{ - int i; - - current_drive->diskstate_flags &= ~toc_bit; - clr_cmdbuf(); - if (fam1_drive) - { - drvcmd[0]=CMD1_DISKINFO; - response_count=6; - flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; - } - else if (fam0LV_drive) - { - drvcmd[0]=CMD0_DISKINFO; - response_count=6; - if(famLV_drive) - flags_cmd_out=f_putcmd; - else - flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; - } - else if (fam2_drive) - { - /* possibly longer timeout periods necessary */ - current_drive->f_multisession=0; - drvcmd[0]=CMD2_DISKINFO; - drvcmd[1]=0x02; - drvcmd[2]=0xAB; - drvcmd[3]=0xFF; /* session */ - response_count=8; - flags_cmd_out=f_putcmd; - } - else if (famT_drive) - { - current_drive->f_multisession=0; - response_count=12; - drvcmd[0]=CMDT_DISKINFO; - drvcmd[1]=0x02; - drvcmd[6]=CDROM_LEADOUT; - drvcmd[8]=response_count; - drvcmd[9]=0x00; - } - i=cmd_out(); - if (i<0) return (i); - if ((famT_drive)&&(i<response_count)) return (-100-i); - if ((fam1_drive)||(fam2_drive)||(fam0LV_drive)) - current_drive->xa_byte=infobuf[0]; - if (fam2_drive) - { - current_drive->first_session=infobuf[1]; - current_drive->last_session=infobuf[2]; - current_drive->n_first_track=infobuf[3]; - current_drive->n_last_track=infobuf[4]; - if (current_drive->first_session!=current_drive->last_session) - { - current_drive->f_multisession=1; - current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[5]),make16(infobuf[6],infobuf[7]))); - } -#if 0 - if (current_drive->first_session!=current_drive->last_session) - { - if (current_drive->last_session<=20) - zwanzig=current_drive->last_session+1; - else zwanzig=20; - for (count=current_drive->first_session;count<zwanzig;count++) - { - drvcmd[0]=CMD2_DISKINFO; - drvcmd[1]=0x02; - drvcmd[2]=0xAB; - drvcmd[3]=count; - response_count=8; - flags_cmd_out=f_putcmd; - i=cmd_out(); - if (i<0) return (i); - current_drive->msf_multi_n[count]=make32(make16(0,infobuf[5]),make16(infobuf[6],infobuf[7])); - } - current_drive->diskstate_flags |= multisession_bit; - } -#endif - drvcmd[0]=CMD2_DISKINFO; - drvcmd[1]=0x02; - drvcmd[2]=0xAA; - drvcmd[3]=0xFF; - response_count=5; - flags_cmd_out=f_putcmd; - i=cmd_out(); - if (i<0) return (i); - current_drive->size_msf=make32(make16(0,infobuf[2]),make16(infobuf[3],infobuf[4])); - current_drive->size_blk=msf2blk(current_drive->size_msf); - current_drive->CDsize_frm=current_drive->size_blk+1; - } - else if (famT_drive) - { - current_drive->size_msf=make32(make16(infobuf[8],infobuf[9]),make16(infobuf[10],infobuf[11])); - current_drive->size_blk=msf2blk(current_drive->size_msf); - current_drive->CDsize_frm=current_drive->size_blk+1; - current_drive->n_first_track=infobuf[2]; - current_drive->n_last_track=infobuf[3]; - } - else - { - current_drive->n_first_track=infobuf[1]; - current_drive->n_last_track=infobuf[2]; - current_drive->size_msf=make32(make16(0,infobuf[3]),make16(infobuf[4],infobuf[5])); - current_drive->size_blk=msf2blk(current_drive->size_msf); - if (famLV_drive) current_drive->CDsize_frm=current_drive->size_blk+1; - } - current_drive->diskstate_flags |= toc_bit; - msg(DBG_TOC,"TocDesc: xa %02X firstt %02X lastt %02X size %08X firstses %02X lastsess %02X\n", - current_drive->xa_byte, - current_drive->n_first_track, - current_drive->n_last_track, - current_drive->size_msf, - current_drive->first_session, - current_drive->last_session); - return (0); -} -/*==========================================================================*/ -static int cc_ReadTocEntry(int num) -{ - int i; - - clr_cmdbuf(); - if (fam1_drive) - { - drvcmd[0]=CMD1_READTOC; - drvcmd[2]=num; - response_count=8; - flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; - } - else if (fam2_drive) - { - /* possibly longer timeout periods necessary */ - drvcmd[0]=CMD2_DISKINFO; - drvcmd[1]=0x02; - drvcmd[2]=num; - response_count=5; - flags_cmd_out=f_putcmd; - } - else if (fam0LV_drive) - { - drvcmd[0]=CMD0_READTOC; - drvcmd[1]=0x02; - drvcmd[2]=num; - response_count=8; - if (famLV_drive) - flags_cmd_out=f_putcmd; - else - flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; - } - else if (famT_drive) - { - response_count=12; - drvcmd[0]=CMDT_DISKINFO; - drvcmd[1]=0x02; - drvcmd[6]=num; - drvcmd[8]=response_count; - drvcmd[9]=0x00; - } - i=cmd_out(); - if (i<0) return (i); - if ((famT_drive)&&(i<response_count)) return (-100-i); - if ((fam1_drive)||(fam0LV_drive)) - { - current_drive->TocEnt_nixbyte=infobuf[0]; - i=1; - } - else if (fam2_drive) i=0; - else if (famT_drive) i=5; - current_drive->TocEnt_ctl_adr=swap_nibbles(infobuf[i++]); - if ((fam1_drive)||(fam0L_drive)) - { - current_drive->TocEnt_number=infobuf[i++]; - current_drive->TocEnt_format=infobuf[i]; - } - else - { - current_drive->TocEnt_number=num; - current_drive->TocEnt_format=0; - } - if (fam1_drive) i=4; - else if (fam0LV_drive) i=5; - else if (fam2_drive) i=2; - else if (famT_drive) i=9; - current_drive->TocEnt_address=make32(make16(0,infobuf[i]), - make16(infobuf[i+1],infobuf[i+2])); - for (i=0;i<response_count;i++) - sprintf(&msgbuf[i*3], " %02X", infobuf[i]); - msgbuf[i*3]=0; - msg(DBG_ECS,"TocEntry:%s\n", msgbuf); - msg(DBG_TOC,"TocEntry: %02X %02X %02X %02X %08X\n", - current_drive->TocEnt_nixbyte, current_drive->TocEnt_ctl_adr, - current_drive->TocEnt_number, current_drive->TocEnt_format, - current_drive->TocEnt_address); - return (0); -} -/*==========================================================================*/ -static int cc_ReadPacket(void) -{ - int i; - - clr_cmdbuf(); - drvcmd[0]=CMD0_PACKET; - drvcmd[1]=response_count; - if(famL_drive) flags_cmd_out=f_putcmd; - else if (fam01_drive) - flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check; - else if (fam2_drive) return (-1); /* not implemented yet */ - else if (famT_drive) - { - return (-1); - } - i=cmd_out(); - return (i); -} -/*==========================================================================*/ -static int convert_UPC(u_char *p) -{ - int i; - - p++; - if (fam0L_drive) p[13]=0; - for (i=0;i<7;i++) - { - if (fam1_drive) current_drive->UPC_buf[i]=swap_nibbles(*p++); - else if (fam0L_drive) - { - current_drive->UPC_buf[i]=((*p++)<<4)&0xFF; - current_drive->UPC_buf[i] |= *p++; - } - else if (famT_drive) - { - return (-1); - } - else /* CD200 */ - { - return (-1); - } - } - current_drive->UPC_buf[6] &= 0xF0; - return (0); -} -/*==========================================================================*/ -static int cc_ReadUPC(void) -{ - int i; -#if TEST_UPC - int block, checksum; -#endif /* TEST_UPC */ - - if (fam2_drive) return (0); /* not implemented yet */ - if (famT_drive) return (0); /* not implemented yet */ - if (famV_drive) return (0); /* not implemented yet */ -#if 1 - if (fam0_drive) return (0); /* but it should work */ -#endif - - current_drive->diskstate_flags &= ~upc_bit; -#if TEST_UPC - for (block=CD_MSF_OFFSET+1;block<CD_MSF_OFFSET+200;block++) - { -#endif /* TEST_UPC */ - clr_cmdbuf(); - if (fam1_drive) - { - drvcmd[0]=CMD1_READ_UPC; -#if TEST_UPC - drvcmd[1]=(block>>16)&0xFF; - drvcmd[2]=(block>>8)&0xFF; - drvcmd[3]=block&0xFF; -#endif /* TEST_UPC */ - response_count=8; - flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; - } - else if (fam0L_drive) - { - drvcmd[0]=CMD0_READ_UPC; -#if TEST_UPC - drvcmd[2]=(block>>16)&0xFF; - drvcmd[3]=(block>>8)&0xFF; - drvcmd[4]=block&0xFF; -#endif /* TEST_UPC */ - response_count=0; - flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1; - } - else if (fam2_drive) - { - return (-1); - } - else if (famT_drive) - { - return (-1); - } - i=cmd_out(); - if (i<0) - { - msg(DBG_000,"cc_ReadUPC cmd_out: err %d\n", i); - return (i); - } - if (fam0L_drive) - { - response_count=16; - if (famL_drive) flags_cmd_out=f_putcmd; - i=cc_ReadPacket(); - if (i<0) - { - msg(DBG_000,"cc_ReadUPC ReadPacket: err %d\n", i); - return (i); - } - } -#if TEST_UPC - checksum=0; -#endif /* TEST_UPC */ - for (i=0;i<(fam1_drive?8:16);i++) - { -#if TEST_UPC - checksum |= infobuf[i]; -#endif /* TEST_UPC */ - sprintf(&msgbuf[i*3], " %02X", infobuf[i]); - } - msgbuf[i*3]=0; - msg(DBG_UPC,"UPC info:%s\n", msgbuf); -#if TEST_UPC - if ((checksum&0x7F)!=0) break; - } -#endif /* TEST_UPC */ - current_drive->UPC_ctl_adr=0; - if (fam1_drive) i=0; - else i=2; - if ((infobuf[i]&0x80)!=0) - { - convert_UPC(&infobuf[i]); - current_drive->UPC_ctl_adr = (current_drive->TocEnt_ctl_adr & 0xF0) | 0x02; - } - for (i=0;i<7;i++) - sprintf(&msgbuf[i*3], " %02X", current_drive->UPC_buf[i]); - sprintf(&msgbuf[i*3], " (%02X)", current_drive->UPC_ctl_adr); - msgbuf[i*3+5]=0; - msg(DBG_UPC,"UPC code:%s\n", msgbuf); - current_drive->diskstate_flags |= upc_bit; - return (0); -} - -static int sbpcd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn) -{ - int i; - unsigned char *mcnp = mcn->medium_catalog_number; - unsigned char *resp; - - current_drive->diskstate_flags &= ~upc_bit; - clr_cmdbuf(); - if (fam1_drive) - { - drvcmd[0]=CMD1_READ_UPC; - response_count=8; - flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; - } - else if (fam0L_drive) - { - drvcmd[0]=CMD0_READ_UPC; - response_count=0; - flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1; - } - else if (fam2_drive) - { - return (-1); - } - else if (famT_drive) - { - return (-1); - } - i=cmd_out(); - if (i<0) - { - msg(DBG_000,"cc_ReadUPC cmd_out: err %d\n", i); - return (i); - } - if (fam0L_drive) - { - response_count=16; - if (famL_drive) flags_cmd_out=f_putcmd; - i=cc_ReadPacket(); - if (i<0) - { - msg(DBG_000,"cc_ReadUPC ReadPacket: err %d\n", i); - return (i); - } - } - current_drive->UPC_ctl_adr=0; - if (fam1_drive) i=0; - else i=2; - - resp = infobuf + i; - if (*resp++ == 0x80) { - /* packed bcd to single ASCII digits */ - *mcnp++ = (*resp >> 4) + '0'; - *mcnp++ = (*resp++ & 0x0f) + '0'; - *mcnp++ = (*resp >> 4) + '0'; - *mcnp++ = (*resp++ & 0x0f) + '0'; - *mcnp++ = (*resp >> 4) + '0'; - *mcnp++ = (*resp++ & 0x0f) + '0'; - *mcnp++ = (*resp >> 4) + '0'; - *mcnp++ = (*resp++ & 0x0f) + '0'; - *mcnp++ = (*resp >> 4) + '0'; - *mcnp++ = (*resp++ & 0x0f) + '0'; - *mcnp++ = (*resp >> 4) + '0'; - *mcnp++ = (*resp++ & 0x0f) + '0'; - *mcnp++ = (*resp >> 4) + '0'; - } - *mcnp = '\0'; - - current_drive->diskstate_flags |= upc_bit; - return (0); -} - -/*==========================================================================*/ -static int cc_CheckMultiSession(void) -{ - int i; - - if (fam2_drive) return (0); - current_drive->f_multisession=0; - current_drive->lba_multi=0; - if (fam0_drive) return (0); - clr_cmdbuf(); - if (fam1_drive) - { - drvcmd[0]=CMD1_MULTISESS; - response_count=6; - flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check; - i=cmd_out(); - if (i<0) return (i); - if ((infobuf[0]&0x80)!=0) - { - current_drive->f_multisession=1; - current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[1]), - make16(infobuf[2],infobuf[3]))); - } - } - else if (famLV_drive) - { - drvcmd[0]=CMDL_MULTISESS; - drvcmd[1]=3; - drvcmd[2]=1; - response_count=8; - flags_cmd_out=f_putcmd; - i=cmd_out(); - if (i<0) return (i); - current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[5]), - make16(infobuf[6],infobuf[7]))); - } - else if (famT_drive) - { - response_count=12; - drvcmd[0]=CMDT_DISKINFO; - drvcmd[1]=0x02; - drvcmd[6]=0; - drvcmd[8]=response_count; - drvcmd[9]=0x40; - i=cmd_out(); - if (i<0) return (i); - if (i<response_count) return (-100-i); - current_drive->first_session=infobuf[2]; - current_drive->last_session=infobuf[3]; - current_drive->track_of_last_session=infobuf[6]; - if (current_drive->first_session!=current_drive->last_session) - { - current_drive->f_multisession=1; - current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[9]),make16(infobuf[10],infobuf[11]))); - } - } - for (i=0;i<response_count;i++) - sprintf(&msgbuf[i*3], " %02X", infobuf[i]); - msgbuf[i*3]=0; - msg(DBG_MUL,"MultiSession Info:%s (%d)\n", msgbuf, current_drive->lba_multi); - if (current_drive->lba_multi>200) - { - current_drive->f_multisession=1; - msg(DBG_MUL,"MultiSession base: %06X\n", current_drive->lba_multi); - } - return (0); -} -/*==========================================================================*/ -#ifdef FUTURE -static int cc_SubChanInfo(int frame, int count, u_char *buffer) - /* "frame" is a RED BOOK (msf-bin) address */ -{ - int i; - - if (fam0LV_drive) return (-ENOSYS); /* drive firmware lacks it */ - if (famT_drive) - { - return (-1); - } -#if 0 - if (current_drive->audio_state!=audio_playing) return (-ENODATA); -#endif - clr_cmdbuf(); - drvcmd[0]=CMD1_SUBCHANINF; - drvcmd[1]=(frame>>16)&0xFF; - drvcmd[2]=(frame>>8)&0xFF; - drvcmd[3]=frame&0xFF; - drvcmd[5]=(count>>8)&0xFF; - drvcmd[6]=count&0xFF; - flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check; - cmd_type=READ_SC; - current_drive->frame_size=CD_FRAMESIZE_SUB; - i=cmd_out(); /* which buffer to use? */ - return (i); -} -#endif /* FUTURE */ -/*==========================================================================*/ -static void __init check_datarate(void) -{ - int i=0; - - msg(DBG_IOX,"check_datarate entered.\n"); - datarate=0; -#if TEST_STI - for (i=0;i<=1000;i++) printk("."); -#endif - /* set a timer to make (timed_out_delay!=0) after 1.1 seconds */ -#if 1 - del_timer(&delay_timer); -#endif - delay_timer.expires=jiffies+11*HZ/10; - timed_out_delay=0; - add_timer(&delay_timer); -#if 0 - msg(DBG_TIM,"delay timer started (11*HZ/10).\n"); -#endif - do - { - i=inb(CDi_status); - datarate++; -#if 1 - if (datarate>0x6FFFFFFF) break; -#endif - } - while (!timed_out_delay); - del_timer(&delay_timer); -#if 0 - msg(DBG_TIM,"datarate: %04X\n", datarate); -#endif - if (datarate<65536) datarate=65536; - maxtim16=datarate*16; - maxtim04=datarate*4; - maxtim02=datarate*2; - maxtim_8=datarate/32; -#if LONG_TIMING - maxtim_data=datarate/100; -#else - maxtim_data=datarate/300; -#endif /* LONG_TIMING */ -#if 0 - msg(DBG_TIM,"maxtim_8 %d, maxtim_data %d.\n", maxtim_8, maxtim_data); -#endif -} -/*==========================================================================*/ -#if 0 -static int c2_ReadError(int fam) -{ - int i; - - clr_cmdbuf(); - response_count=9; - clr_respo_buf(9); - if (fam==1) - { - drvcmd[0]=CMD0_READ_ERR; /* same as CMD1_ and CMDL_ */ - i=do_cmd(f_putcmd|f_lopsta|f_getsta|f_ResponseStatus); - } - else if (fam==2) - { - drvcmd[0]=CMD2_READ_ERR; - i=do_cmd(f_putcmd); - } - else return (-1); - return (i); -} -#endif -/*==========================================================================*/ -static void __init ask_mail(void) -{ - int i; - - msg(DBG_INF, "please mail the following lines to emoenke@gwdg.de\n"); - msg(DBG_INF, "(don't mail if you are not using the actual kernel):\n"); - msg(DBG_INF, "%s\n", VERSION); - msg(DBG_INF, "address %03X, type %s, drive %s (ID %d)\n", - CDo_command, type, current_drive->drive_model, current_drive->drv_id); - for (i=0;i<12;i++) - sprintf(&msgbuf[i*3], " %02X", infobuf[i]); - msgbuf[i*3]=0; - msg(DBG_INF,"infobuf =%s\n", msgbuf); - for (i=0;i<12;i++) - sprintf(&msgbuf[i*3], " %c ", infobuf[i]); - msgbuf[i*3]=0; - msg(DBG_INF,"infobuf =%s\n", msgbuf); -} -/*==========================================================================*/ -static int __init check_version(void) -{ - int i, j, l; - int teac_possible=0; - - msg(DBG_INI,"check_version: id=%d, d=%d.\n", current_drive->drv_id, current_drive - D_S); - current_drive->drv_type=0; - - /* check for CR-52x, CR-56x, LCS-7260 and ECS-AT */ - /* clear any pending error state */ - clr_cmdbuf(); - drvcmd[0]=CMD0_READ_ERR; /* same as CMD1_ and CMDL_ */ - response_count=9; - flags_cmd_out=f_putcmd; - i=cmd_out(); - if (i<0) msg(DBG_INI,"CMD0_READ_ERR returns %d (ok anyway).\n",i); - /* read drive version */ - clr_cmdbuf(); - for (i=0;i<12;i++) infobuf[i]=0; - drvcmd[0]=CMD0_READ_VER; /* same as CMD1_ and CMDL_ */ - response_count=12; /* fam1: only 11 */ - flags_cmd_out=f_putcmd; - i=cmd_out(); - if (i<-1) msg(DBG_INI,"CMD0_READ_VER returns %d\n",i); - if (i==-11) teac_possible++; - j=0; - for (i=0;i<12;i++) j+=infobuf[i]; - if (j) - { - for (i=0;i<12;i++) - sprintf(&msgbuf[i*3], " %02X", infobuf[i]); - msgbuf[i*3]=0; - msg(DBG_ECS,"infobuf =%s\n", msgbuf); - for (i=0;i<12;i++) - sprintf(&msgbuf[i*3], " %c ", infobuf[i]); - msgbuf[i*3]=0; - msg(DBG_ECS,"infobuf =%s\n", msgbuf); - } - for (i=0;i<4;i++) if (infobuf[i]!=family1[i]) break; - if (i==4) - { - current_drive->drive_model[0]='C'; - current_drive->drive_model[1]='R'; - current_drive->drive_model[2]='-'; - current_drive->drive_model[3]='5'; - current_drive->drive_model[4]=infobuf[i++]; - current_drive->drive_model[5]=infobuf[i++]; - current_drive->drive_model[6]=0; - current_drive->drv_type=drv_fam1; - } - if (!current_drive->drv_type) - { - for (i=0;i<8;i++) if (infobuf[i]!=family0[i]) break; - if (i==8) - { - current_drive->drive_model[0]='C'; - current_drive->drive_model[1]='R'; - current_drive->drive_model[2]='-'; - current_drive->drive_model[3]='5'; - current_drive->drive_model[4]='2'; - current_drive->drive_model[5]='x'; - current_drive->drive_model[6]=0; - current_drive->drv_type=drv_fam0; - } - } - if (!current_drive->drv_type) - { - for (i=0;i<8;i++) if (infobuf[i]!=familyL[i]) break; - if (i==8) - { - for (j=0;j<8;j++) - current_drive->drive_model[j]=infobuf[j]; - current_drive->drive_model[8]=0; - current_drive->drv_type=drv_famL; - } - } - if (!current_drive->drv_type) - { - for (i=0;i<6;i++) if (infobuf[i]!=familyV[i]) break; - if (i==6) - { - for (j=0;j<6;j++) - current_drive->drive_model[j]=infobuf[j]; - current_drive->drive_model[6]=0; - current_drive->drv_type=drv_famV; - i+=2; /* 2 blanks before version */ - } - } - if (!current_drive->drv_type) - { - /* check for CD200 */ - clr_cmdbuf(); - drvcmd[0]=CMD2_READ_ERR; - response_count=9; - flags_cmd_out=f_putcmd; - i=cmd_out(); - if (i<0) msg(DBG_INI,"CMD2_READERR returns %d (ok anyway).\n",i); - if (i<0) msg(DBG_000,"CMD2_READERR returns %d (ok anyway).\n",i); - /* read drive version */ - clr_cmdbuf(); - for (i=0;i<12;i++) infobuf[i]=0; - if (sbpro_type==1) OUT(CDo_sel_i_d,0); -#if 0 - OUT(CDo_reset,0); - sbp_sleep(6*HZ); - OUT(CDo_enable,current_drive->drv_sel); -#endif - drvcmd[0]=CMD2_READ_VER; - response_count=12; - flags_cmd_out=f_putcmd; - i=cmd_out(); - if (i<0) msg(DBG_INI,"CMD2_READ_VER returns %d\n",i); - if (i==-7) teac_possible++; - j=0; - for (i=0;i<12;i++) j+=infobuf[i]; - if (j) - { - for (i=0;i<12;i++) - sprintf(&msgbuf[i*3], " %02X", infobuf[i]); - msgbuf[i*3]=0; - msg(DBG_IDX,"infobuf =%s\n", msgbuf); - for (i=0;i<12;i++) - sprintf(&msgbuf[i*3], " %c ", infobuf[i]); - msgbuf[i*3]=0; - msg(DBG_IDX,"infobuf =%s\n", msgbuf); - } - if (i>=0) - { - for (i=0;i<5;i++) if (infobuf[i]!=family2[i]) break; - if (i==5) - { - current_drive->drive_model[0]='C'; - current_drive->drive_model[1]='D'; - current_drive->drive_model[2]='2'; - current_drive->drive_model[3]='0'; - current_drive->drive_model[4]='0'; - current_drive->drive_model[5]=infobuf[i++]; - current_drive->drive_model[6]=infobuf[i++]; - current_drive->drive_model[7]=0; - current_drive->drv_type=drv_fam2; - } - } - } - if (!current_drive->drv_type) - { - /* check for TEAC CD-55A */ - msg(DBG_TEA,"teac_possible: %d\n",teac_possible); - for (j=1;j<=((current_drive->drv_id==0)?3:1);j++) - { - for (l=1;l<=((current_drive->drv_id==0)?10:1);l++) - { - msg(DBG_TEA,"TEAC reset #%d-%d.\n", j, l); - if (sbpro_type==1) OUT(CDo_reset,0); - else - { - OUT(CDo_enable,current_drive->drv_sel); - OUT(CDo_sel_i_d,0); - OUT(CDo_command,CMDT_RESET); - for (i=0;i<9;i++) OUT(CDo_command,0); - } - sbp_sleep(5*HZ/10); - OUT(CDo_enable,current_drive->drv_sel); - OUT(CDo_sel_i_d,0); - i=inb(CDi_status); - msg(DBG_TEA,"TEAC CDi_status: %02X.\n",i); -#if 0 - if (i&s_not_result_ready) continue; /* drive not present or ready */ -#endif - i=inb(CDi_info); - msg(DBG_TEA,"TEAC CDi_info: %02X.\n",i); - if (i==0x55) break; /* drive found */ - } - if (i==0x55) break; /* drive found */ - } - if (i==0x55) /* drive found */ - { - msg(DBG_TEA,"TEAC drive found.\n"); - clr_cmdbuf(); - flags_cmd_out=f_putcmd; - response_count=12; - drvcmd[0]=CMDT_READ_VER; - drvcmd[4]=response_count; - for (i=0;i<12;i++) infobuf[i]=0; - i=cmd_out_T(); - if (i!=0) msg(DBG_TEA,"cmd_out_T(CMDT_READ_VER) returns %d.\n",i); - for (i=1;i<6;i++) if (infobuf[i]!=familyT[i-1]) break; - if (i==6) - { - current_drive->drive_model[0]='C'; - current_drive->drive_model[1]='D'; - current_drive->drive_model[2]='-'; - current_drive->drive_model[3]='5'; - current_drive->drive_model[4]='5'; - current_drive->drive_model[5]=0; - current_drive->drv_type=drv_famT; - } - } - } - if (!current_drive->drv_type) - { - msg(DBG_TEA,"no drive found at address %03X under ID %d.\n",CDo_command,current_drive->drv_id); - return (-522); - } - for (j=0;j<4;j++) current_drive->firmware_version[j]=infobuf[i+j]; - if (famL_drive) - { - u_char lcs_firm_e1[]="A E1"; - u_char lcs_firm_f4[]="A4F4"; - - for (j=0;j<4;j++) - if (current_drive->firmware_version[j]!=lcs_firm_e1[j]) break; - if (j==4) current_drive->drv_type=drv_e1; - - for (j=0;j<4;j++) - if (current_drive->firmware_version[j]!=lcs_firm_f4[j]) break; - if (j==4) current_drive->drv_type=drv_f4; - - if (current_drive->drv_type==drv_famL) ask_mail(); - } - else if (famT_drive) - { - j=infobuf[4]; /* one-byte version??? - here: 0x15 */ - if (j=='5') - { - current_drive->firmware_version[0]=infobuf[7]; - current_drive->firmware_version[1]=infobuf[8]; - current_drive->firmware_version[2]=infobuf[10]; - current_drive->firmware_version[3]=infobuf[11]; - } - else - { - if (j!=0x15) ask_mail(); - current_drive->firmware_version[0]='0'; - current_drive->firmware_version[1]='.'; - current_drive->firmware_version[2]='0'+(j>>4); - current_drive->firmware_version[3]='0'+(j&0x0f); - } - } - else /* CR-52x, CR-56x, CD200, ECS-AT */ - { - j = (current_drive->firmware_version[0] & 0x0F) * 100 + - (current_drive->firmware_version[2] & 0x0F) *10 + - (current_drive->firmware_version[3] & 0x0F); - if (fam0_drive) - { - if (j<200) current_drive->drv_type=drv_199; - else if (j<201) current_drive->drv_type=drv_200; - else if (j<210) current_drive->drv_type=drv_201; - else if (j<211) current_drive->drv_type=drv_210; - else if (j<300) current_drive->drv_type=drv_211; - else if (j>=300) current_drive->drv_type=drv_300; - } - else if (fam1_drive) - { - if (j<100) current_drive->drv_type=drv_099; - else - { - current_drive->drv_type=drv_100; - if ((j!=500)&&(j!=102)) ask_mail(); - } - } - else if (fam2_drive) - { - if (current_drive->drive_model[5]=='F') - { - if ((j!=1)&&(j!=35)&&(j!=200)&&(j!=210)) - ask_mail(); /* unknown version at time */ - } - else - { - msg(DBG_INF,"this CD200 drive is not fully supported yet - only audio will work.\n"); - if ((j!=101)&&(j!=35)) - ask_mail(); /* unknown version at time */ - } - } - else if (famV_drive) - { - if ((j==100)||(j==150)) current_drive->drv_type=drv_at; - ask_mail(); /* hopefully we get some feedback by this */ - } - } - msg(DBG_LCS,"drive type %02X\n",current_drive->drv_type); - msg(DBG_INI,"check_version done.\n"); - return (0); -} -/*==========================================================================*/ -static void switch_drive(struct sbpcd_drive *p) -{ - current_drive = p; - OUT(CDo_enable,current_drive->drv_sel); - msg(DBG_DID,"drive %d (ID=%d) activated.\n", - current_drive - D_S, current_drive->drv_id); - return; -} -/*==========================================================================*/ -#ifdef PATH_CHECK -/* - * probe for the presence of an interface card - */ -static int __init check_card(int port) -{ -#undef N_RESPO -#define N_RESPO 20 - int i, j, k; - u_char response[N_RESPO]; - u_char save_port0; - u_char save_port3; - - msg(DBG_INI,"check_card entered.\n"); - save_port0=inb(port+0); - save_port3=inb(port+3); - - for (j=0;j<NR_SBPCD;j++) - { - OUT(port+3,j) ; /* enable drive #j */ - OUT(port+0,CMD0_PATH_CHECK); - for (i=10;i>0;i--) OUT(port+0,0); - for (k=0;k<N_RESPO;k++) response[k]=0; - for (k=0;k<N_RESPO;k++) - { - for (i=10000;i>0;i--) - { - if (inb(port+1)&s_not_result_ready) continue; - response[k]=inb(port+0); - break; - } - } - for (i=0;i<N_RESPO;i++) - sprintf(&msgbuf[i*3], " %02X", response[i]); - msgbuf[i*3]=0; - msg(DBG_TEA,"path check 00 (%d): %s\n", j, msgbuf); - OUT(port+0,CMD0_PATH_CHECK); - for (i=10;i>0;i--) OUT(port+0,0); - for (k=0;k<N_RESPO;k++) response[k]=0xFF; - for (k=0;k<N_RESPO;k++) - { - for (i=10000;i>0;i--) - { - if (inb(port+1)&s_not_result_ready) continue; - response[k]=inb(port+0); - break; - } - } - for (i=0;i<N_RESPO;i++) - sprintf(&msgbuf[i*3], " %02X", response[i]); - msgbuf[i*3]=0; - msg(DBG_TEA,"path check 00 (%d): %s\n", j, msgbuf); - - if (response[0]==0xAA) - if (response[1]==0x55) - return (0); - } - for (j=0;j<NR_SBPCD;j++) - { - OUT(port+3,j) ; /* enable drive #j */ - OUT(port+0,CMD2_READ_VER); - for (i=10;i>0;i--) OUT(port+0,0); - for (k=0;k<N_RESPO;k++) response[k]=0; - for (k=0;k<N_RESPO;k++) - { - for (i=1000000;i>0;i--) - { - if (inb(port+1)&s_not_result_ready) continue; - response[k]=inb(port+0); - break; - } - } - for (i=0;i<N_RESPO;i++) - sprintf(&msgbuf[i*3], " %02X", response[i]); - msgbuf[i*3]=0; - msg(DBG_TEA,"path check 12 (%d): %s\n", j, msgbuf); - - OUT(port+0,CMD2_READ_VER); - for (i=10;i>0;i--) OUT(port+0,0); - for (k=0;k<N_RESPO;k++) response[k]=0xFF; - for (k=0;k<N_RESPO;k++) - { - for (i=1000000;i>0;i--) - { - if (inb(port+1)&s_not_result_ready) continue; - response[k]=inb(port+0); - break; - } - } - for (i=0;i<N_RESPO;i++) - sprintf(&msgbuf[i*3], " %02X", response[i]); - msgbuf[i*3]=0; - msg(DBG_TEA,"path check 12 (%d): %s\n", j, msgbuf); - - if (response[0]==0xAA) - if (response[1]==0x55) - return (0); - } - OUT(port+0,save_port0); - OUT(port+3,save_port3); - return (0); /* in any case - no real "function" at time */ -} -#endif /* PATH_CHECK */ -/*==========================================================================*/ -/*==========================================================================*/ -/* - * probe for the presence of drives on the selected controller - */ -static int __init check_drives(void) -{ - int i, j; - - msg(DBG_INI,"check_drives entered.\n"); - ndrives=0; - for (j=0;j<max_drives;j++) - { - struct sbpcd_drive *p = D_S + ndrives; - p->drv_id=j; - if (sbpro_type==1) p->drv_sel=(j&0x01)<<1|(j&0x02)>>1; - else p->drv_sel=j; - switch_drive(p); - msg(DBG_INI,"check_drives: drive %d (ID=%d) activated.\n",ndrives,j); - msg(DBG_000,"check_drives: drive %d (ID=%d) activated.\n",ndrives,j); - i=check_version(); - if (i<0) msg(DBG_INI,"check_version returns %d.\n",i); - else - { - current_drive->drv_options=drv_pattern[j]; - if (fam0L_drive) current_drive->drv_options&=~(speed_auto|speed_300|speed_150); - msg(DBG_INF, "Drive %d (ID=%d): %.9s (%.4s) at 0x%03X (type %d)\n", - current_drive - D_S, - current_drive->drv_id, - current_drive->drive_model, - current_drive->firmware_version, - CDo_command, - sbpro_type); - ndrives++; - } - } - for (j=ndrives;j<NR_SBPCD;j++) D_S[j].drv_id=-1; - if (ndrives==0) return (-1); - return (0); -} -/*==========================================================================*/ -#ifdef FUTURE -/* - * obtain if requested service disturbs current audio state - */ -static int obey_audio_state(u_char audio_state, u_char func,u_char subfunc) -{ - switch (audio_state) /* audio status from controller */ - { - case aud_11: /* "audio play in progress" */ - case audx11: - switch (func) /* DOS command code */ - { - case cmd_07: /* input flush */ - case cmd_0d: /* open device */ - case cmd_0e: /* close device */ - case cmd_0c: /* ioctl output */ - return (1); - case cmd_03: /* ioctl input */ - switch (subfunc) - /* DOS ioctl input subfunction */ - { - case cxi_00: - case cxi_06: - case cxi_09: - return (1); - default: - return (ERROR15); - } - return (1); - default: - return (ERROR15); - } - return (1); - case aud_12: /* "audio play paused" */ - case audx12: - return (1); - default: - return (2); - } -} -/*==========================================================================*/ -/* allowed is only - * ioctl_o, flush_input, open_device, close_device, - * tell_address, tell_volume, tell_capabiliti, - * tell_framesize, tell_CD_changed, tell_audio_posi - */ -static int check_allowed1(u_char func1, u_char func2) -{ -#if 000 - if (func1==ioctl_o) return (0); - if (func1==read_long) return (-1); - if (func1==read_long_prefetch) return (-1); - if (func1==seek) return (-1); - if (func1==audio_play) return (-1); - if (func1==audio_pause) return (-1); - if (func1==audio_resume) return (-1); - if (func1!=ioctl_i) return (0); - if (func2==tell_SubQ_run_tot) return (-1); - if (func2==tell_cdsize) return (-1); - if (func2==tell_TocDescrip) return (-1); - if (func2==tell_TocEntry) return (-1); - if (func2==tell_subQ_info) return (-1); - if (fam1_drive) if (func2==tell_SubChanInfo) return (-1); - if (func2==tell_UPC) return (-1); -#else - return (0); -#endif -} -/*==========================================================================*/ -static int check_allowed2(u_char func1, u_char func2) -{ -#if 000 - if (func1==read_long) return (-1); - if (func1==read_long_prefetch) return (-1); - if (func1==seek) return (-1); - if (func1==audio_play) return (-1); - if (func1!=ioctl_o) return (0); - if (fam1_drive) - { - if (func2==EjectDisk) return (-1); - if (func2==CloseTray) return (-1); - } -#else - return (0); -#endif -} -/*==========================================================================*/ -static int check_allowed3(u_char func1, u_char func2) -{ -#if 000 - if (func1==ioctl_i) - { - if (func2==tell_address) return (0); - if (func2==tell_capabiliti) return (0); - if (func2==tell_CD_changed) return (0); - if (fam0L_drive) if (func2==tell_SubChanInfo) return (0); - return (-1); - } - if (func1==ioctl_o) - { - if (func2==DriveReset) return (0); - if (fam0L_drive) - { - if (func2==EjectDisk) return (0); - if (func2==LockDoor) return (0); - if (func2==CloseTray) return (0); - } - return (-1); - } - if (func1==flush_input) return (-1); - if (func1==read_long) return (-1); - if (func1==read_long_prefetch) return (-1); - if (func1==seek) return (-1); - if (func1==audio_play) return (-1); - if (func1==audio_pause) return (-1); - if (func1==audio_resume) return (-1); -#else - return (0); -#endif -} -/*==========================================================================*/ -static int seek_pos_audio_end(void) -{ - int i; - - i=msf2blk(current_drive->pos_audio_end)-1; - if (i<0) return (-1); - i=cc_Seek(i,0); - return (i); -} -#endif /* FUTURE */ -/*==========================================================================*/ -static int ReadToC(void) -{ - int i, j; - current_drive->diskstate_flags &= ~toc_bit; - current_drive->ored_ctl_adr=0; - /* special handling of CD-I HE */ - if ((current_drive->n_first_track == 2 && current_drive->n_last_track == 2) || - current_drive->xa_byte == 0x10) - { - current_drive->TocBuffer[1].nixbyte=0; - current_drive->TocBuffer[1].ctl_adr=0x40; - current_drive->TocBuffer[1].number=1; - current_drive->TocBuffer[1].format=0; - current_drive->TocBuffer[1].address=blk2msf(0); - current_drive->ored_ctl_adr |= 0x40; - current_drive->n_first_track = 1; - current_drive->n_last_track = 1; - current_drive->xa_byte = 0x10; - j = 2; - } else - for (j=current_drive->n_first_track;j<=current_drive->n_last_track;j++) - { - i=cc_ReadTocEntry(j); - if (i<0) - { - msg(DBG_INF,"cc_ReadTocEntry(%d) returns %d.\n",j,i); - return (i); - } - current_drive->TocBuffer[j].nixbyte=current_drive->TocEnt_nixbyte; - current_drive->TocBuffer[j].ctl_adr=current_drive->TocEnt_ctl_adr; - current_drive->TocBuffer[j].number=current_drive->TocEnt_number; - current_drive->TocBuffer[j].format=current_drive->TocEnt_format; - current_drive->TocBuffer[j].address=current_drive->TocEnt_address; - current_drive->ored_ctl_adr |= current_drive->TocEnt_ctl_adr; - } - /* fake entry for LeadOut Track */ - current_drive->TocBuffer[j].nixbyte=0; - current_drive->TocBuffer[j].ctl_adr=0; - current_drive->TocBuffer[j].number=CDROM_LEADOUT; - current_drive->TocBuffer[j].format=0; - current_drive->TocBuffer[j].address=current_drive->size_msf; - - current_drive->diskstate_flags |= toc_bit; - return (0); -} -/*==========================================================================*/ -static int DiskInfo(void) -{ - int i, j; - - current_drive->mode=READ_M1; - -#undef LOOP_COUNT -#define LOOP_COUNT 10 /* needed for some "old" drives */ - - msg(DBG_000,"DiskInfo entered.\n"); - for (j=1;j<LOOP_COUNT;j++) - { -#if 0 - i=SetSpeed(); - if (i<0) - { - msg(DBG_INF,"DiskInfo: SetSpeed returns %d\n", i); - continue; - } - i=cc_ModeSense(); - if (i<0) - { - msg(DBG_INF,"DiskInfo: cc_ModeSense returns %d\n", i); - continue; - } -#endif - i=cc_ReadCapacity(); - if (i>=0) break; - msg(DBG_INF,"DiskInfo: ReadCapacity #%d returns %d\n", j, i); -#if 0 - i=cc_DriveReset(); -#endif - if (!fam0_drive && j == 2) break; - } - if (j==LOOP_COUNT) return (-33); /* give up */ - - i=cc_ReadTocDescr(); - if (i<0) - { - msg(DBG_INF,"DiskInfo: ReadTocDescr returns %d\n", i); - return (i); - } - i=ReadToC(); - if (i<0) - { - msg(DBG_INF,"DiskInfo: ReadToC returns %d\n", i); - return (i); - } - i=cc_CheckMultiSession(); - if (i<0) - { - msg(DBG_INF,"DiskInfo: cc_CheckMultiSession returns %d\n", i); - return (i); - } - if (current_drive->f_multisession) current_drive->sbp_bufsiz=1; /* possibly a weird PhotoCD */ - else current_drive->sbp_bufsiz=buffers; - i=cc_ReadTocEntry(current_drive->n_first_track); - if (i<0) - { - msg(DBG_INF,"DiskInfo: cc_ReadTocEntry(1) returns %d\n", i); - return (i); - } - i=cc_ReadUPC(); - if (i<0) msg(DBG_INF,"DiskInfo: cc_ReadUPC returns %d\n", i); - if ((fam0L_drive) && (current_drive->xa_byte==0x20 || current_drive->xa_byte == 0x10)) - { - /* XA disk with old drive */ - cc_ModeSelect(CD_FRAMESIZE_RAW1); - cc_ModeSense(); - } - if (famT_drive) cc_prep_mode_T(); - msg(DBG_000,"DiskInfo done.\n"); - return (0); -} - -static int sbpcd_drive_status(struct cdrom_device_info *cdi, int slot_nr) -{ - struct sbpcd_drive *p = cdi->handle; - int st; - - if (CDSL_CURRENT != slot_nr) { - /* we have no changer support */ - return -EINVAL; - } - - cc_ReadStatus(); - st=ResponseStatus(); - if (st<0) - { - msg(DBG_INF,"sbpcd_drive_status: timeout.\n"); - return (0); - } - msg(DBG_000,"Drive Status: door_locked =%d.\n", st_door_locked); - msg(DBG_000,"Drive Status: door_closed =%d.\n", st_door_closed); - msg(DBG_000,"Drive Status: caddy_in =%d.\n", st_caddy_in); - msg(DBG_000,"Drive Status: disk_ok =%d.\n", st_diskok); - msg(DBG_000,"Drive Status: spinning =%d.\n", st_spinning); - msg(DBG_000,"Drive Status: busy =%d.\n", st_busy); - -#if 0 - if (!(p->status_bits & p_door_closed)) return CDS_TRAY_OPEN; - if (p->status_bits & p_disk_ok) return CDS_DISC_OK; - if (p->status_bits & p_disk_in) return CDS_DRIVE_NOT_READY; - - return CDS_NO_DISC; -#else - if (p->status_bits & p_spinning) return CDS_DISC_OK; -/* return CDS_TRAY_OPEN; */ - return CDS_NO_DISC; - -#endif - -} - - -/*==========================================================================*/ -#ifdef FUTURE -/* - * called always if driver gets entered - * returns 0 or ERROR2 or ERROR15 - */ -static int prepare(u_char func, u_char subfunc) -{ - int i; - - if (fam0L_drive) - { - i=inb(CDi_status); - if (i&s_attention) GetStatus(); - } - else if (fam1_drive) GetStatus(); - else if (fam2_drive) GetStatus(); - else if (famT_drive) GetStatus(); - if (current_drive->CD_changed==0xFF) - { - current_drive->diskstate_flags=0; - current_drive->audio_state=0; - if (!st_diskok) - { - i=check_allowed1(func,subfunc); - if (i<0) return (-2); - } - else - { - i=check_allowed3(func,subfunc); - if (i<0) - { - current_drive->CD_changed=1; - return (-15); - } - } - } - else - { - if (!st_diskok) - { - current_drive->diskstate_flags=0; - current_drive->audio_state=0; - i=check_allowed1(func,subfunc); - if (i<0) return (-2); - } - else - { - if (st_busy) - { - if (current_drive->audio_state!=audio_pausing) - { - i=check_allowed2(func,subfunc); - if (i<0) return (-2); - } - } - else - { - if (current_drive->audio_state==audio_playing) seek_pos_audio_end(); - current_drive->audio_state=0; - } - if (!frame_size_valid) - { - i=DiskInfo(); - if (i<0) - { - current_drive->diskstate_flags=0; - current_drive->audio_state=0; - i=check_allowed1(func,subfunc); - if (i<0) return (-2); - } - } - } - } - return (0); -} -#endif /* FUTURE */ -/*==========================================================================*/ -/*==========================================================================*/ -/* - * Check the results of the "get status" command. - */ -static int sbp_status(void) -{ - int st; - - st=ResponseStatus(); - if (st<0) - { - msg(DBG_INF,"sbp_status: timeout.\n"); - return (0); - } - - if (!st_spinning) msg(DBG_SPI,"motor got off - ignoring.\n"); - - if (st_check) - { - msg(DBG_INF,"st_check detected - retrying.\n"); - return (0); - } - if (!st_door_closed) - { - msg(DBG_INF,"door is open - retrying.\n"); - return (0); - } - if (!st_caddy_in) - { - msg(DBG_INF,"disk removed - retrying.\n"); - return (0); - } - if (!st_diskok) - { - msg(DBG_INF,"!st_diskok detected - retrying.\n"); - return (0); - } - if (st_busy) - { - msg(DBG_INF,"st_busy detected - retrying.\n"); - return (0); - } - return (1); -} -/*==========================================================================*/ - -static int sbpcd_get_last_session(struct cdrom_device_info *cdi, struct cdrom_multisession *ms_infp) -{ - struct sbpcd_drive *p = cdi->handle; - ms_infp->addr_format = CDROM_LBA; - ms_infp->addr.lba = p->lba_multi; - if (p->f_multisession) - ms_infp->xa_flag=1; /* valid redirection address */ - else - ms_infp->xa_flag=0; /* invalid redirection address */ - - return 0; -} - -static int sbpcd_audio_ioctl(struct cdrom_device_info *cdi, u_int cmd, - void * arg) -{ - struct sbpcd_drive *p = cdi->handle; - int i, st, j; - - msg(DBG_IO2,"ioctl(%s, 0x%08lX, 0x%08p)\n", cdi->name, cmd, arg); - if (p->drv_id==-1) { - msg(DBG_INF, "ioctl: bad device: %s\n", cdi->name); - return (-ENXIO); /* no such drive */ - } - down(&ioctl_read_sem); - if (p != current_drive) - switch_drive(p); - - msg(DBG_IO2,"ioctl: device %s, request %04X\n",cdi->name,cmd); - switch (cmd) /* Sun-compatible */ - { - - case CDROMPAUSE: /* Pause the drive */ - msg(DBG_IOC,"ioctl: CDROMPAUSE entered.\n"); - /* pause the drive unit when it is currently in PLAY mode, */ - /* or reset the starting and ending locations when in PAUSED mode. */ - /* If applicable, at the next stopping point it reaches */ - /* the drive will discontinue playing. */ - switch (current_drive->audio_state) - { - case audio_playing: - if (famL_drive) i=cc_ReadSubQ(); - else i=cc_Pause_Resume(1); - if (i<0) RETURN_UP(-EIO); - if (famL_drive) i=cc_Pause_Resume(1); - else i=cc_ReadSubQ(); - if (i<0) RETURN_UP(-EIO); - current_drive->pos_audio_start=current_drive->SubQ_run_tot; - current_drive->audio_state=audio_pausing; - RETURN_UP(0); - case audio_pausing: - i=cc_Seek(current_drive->pos_audio_start,1); - if (i<0) RETURN_UP(-EIO); - RETURN_UP(0); - default: - RETURN_UP(-EINVAL); - } - - case CDROMRESUME: /* resume paused audio play */ - msg(DBG_IOC,"ioctl: CDROMRESUME entered.\n"); - /* resume playing audio tracks when a previous PLAY AUDIO call has */ - /* been paused with a PAUSE command. */ - /* It will resume playing from the location saved in SubQ_run_tot. */ - if (current_drive->audio_state!=audio_pausing) RETURN_UP(-EINVAL); - if (famL_drive) - i=cc_PlayAudio(current_drive->pos_audio_start, - current_drive->pos_audio_end); - else i=cc_Pause_Resume(3); - if (i<0) RETURN_UP(-EIO); - current_drive->audio_state=audio_playing; - RETURN_UP(0); - - case CDROMPLAYMSF: - msg(DBG_IOC,"ioctl: CDROMPLAYMSF entered.\n"); -#ifdef SAFE_MIXED - if (current_drive->has_data>1) RETURN_UP(-EBUSY); -#endif /* SAFE_MIXED */ - if (current_drive->audio_state==audio_playing) - { - i=cc_Pause_Resume(1); - if (i<0) RETURN_UP(-EIO); - i=cc_ReadSubQ(); - if (i<0) RETURN_UP(-EIO); - current_drive->pos_audio_start=current_drive->SubQ_run_tot; - i=cc_Seek(current_drive->pos_audio_start,1); - } - memcpy(&msf, (void *) arg, sizeof(struct cdrom_msf)); - /* values come as msf-bin */ - current_drive->pos_audio_start = (msf.cdmsf_min0<<16) | - (msf.cdmsf_sec0<<8) | - msf.cdmsf_frame0; - current_drive->pos_audio_end = (msf.cdmsf_min1<<16) | - (msf.cdmsf_sec1<<8) | - msf.cdmsf_frame1; - msg(DBG_IOX,"ioctl: CDROMPLAYMSF %08X %08X\n", - current_drive->pos_audio_start,current_drive->pos_audio_end); - i=cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end); - if (i<0) - { - msg(DBG_INF,"ioctl: cc_PlayAudio returns %d\n",i); - DriveReset(); - current_drive->audio_state=0; - RETURN_UP(-EIO); - } - current_drive->audio_state=audio_playing; - RETURN_UP(0); - - case CDROMPLAYTRKIND: /* Play a track. This currently ignores index. */ - msg(DBG_IOC,"ioctl: CDROMPLAYTRKIND entered.\n"); -#ifdef SAFE_MIXED - if (current_drive->has_data>1) RETURN_UP(-EBUSY); -#endif /* SAFE_MIXED */ - if (current_drive->audio_state==audio_playing) - { - msg(DBG_IOX,"CDROMPLAYTRKIND: already audio_playing.\n"); -#if 1 - RETURN_UP(0); /* just let us play on */ -#else - RETURN_UP(-EINVAL); /* play on, but say "error" */ -#endif - } - memcpy(&ti,(void *) arg,sizeof(struct cdrom_ti)); - msg(DBG_IOX,"ioctl: trk0: %d, ind0: %d, trk1:%d, ind1:%d\n", - ti.cdti_trk0,ti.cdti_ind0,ti.cdti_trk1,ti.cdti_ind1); - if (ti.cdti_trk0<current_drive->n_first_track) RETURN_UP(-EINVAL); - if (ti.cdti_trk0>current_drive->n_last_track) RETURN_UP(-EINVAL); - if (ti.cdti_trk1<ti.cdti_trk0) ti.cdti_trk1=ti.cdti_trk0; - if (ti.cdti_trk1>current_drive->n_last_track) ti.cdti_trk1=current_drive->n_last_track; - current_drive->pos_audio_start=current_drive->TocBuffer[ti.cdti_trk0].address; - current_drive->pos_audio_end=current_drive->TocBuffer[ti.cdti_trk1+1].address; - i=cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end); - if (i<0) - { - msg(DBG_INF,"ioctl: cc_PlayAudio returns %d\n",i); - DriveReset(); - current_drive->audio_state=0; - RETURN_UP(-EIO); - } - current_drive->audio_state=audio_playing; - RETURN_UP(0); - - case CDROMREADTOCHDR: /* Read the table of contents header */ - msg(DBG_IOC,"ioctl: CDROMREADTOCHDR entered.\n"); - tochdr.cdth_trk0=current_drive->n_first_track; - tochdr.cdth_trk1=current_drive->n_last_track; - memcpy((void *) arg, &tochdr, sizeof(struct cdrom_tochdr)); - RETURN_UP(0); - - case CDROMREADTOCENTRY: /* Read an entry in the table of contents */ - msg(DBG_IOC,"ioctl: CDROMREADTOCENTRY entered.\n"); - memcpy(&tocentry, (void *) arg, sizeof(struct cdrom_tocentry)); - i=tocentry.cdte_track; - if (i==CDROM_LEADOUT) i=current_drive->n_last_track+1; - else if (i<current_drive->n_first_track||i>current_drive->n_last_track) - RETURN_UP(-EINVAL); - tocentry.cdte_adr=current_drive->TocBuffer[i].ctl_adr&0x0F; - tocentry.cdte_ctrl=(current_drive->TocBuffer[i].ctl_adr>>4)&0x0F; - tocentry.cdte_datamode=current_drive->TocBuffer[i].format; - if (tocentry.cdte_format==CDROM_MSF) /* MSF-bin required */ - { - tocentry.cdte_addr.msf.minute=(current_drive->TocBuffer[i].address>>16)&0x00FF; - tocentry.cdte_addr.msf.second=(current_drive->TocBuffer[i].address>>8)&0x00FF; - tocentry.cdte_addr.msf.frame=current_drive->TocBuffer[i].address&0x00FF; - } - else if (tocentry.cdte_format==CDROM_LBA) /* blk required */ - tocentry.cdte_addr.lba=msf2blk(current_drive->TocBuffer[i].address); - else RETURN_UP(-EINVAL); - memcpy((void *) arg, &tocentry, sizeof(struct cdrom_tocentry)); - RETURN_UP(0); - - case CDROMSTOP: /* Spin down the drive */ - msg(DBG_IOC,"ioctl: CDROMSTOP entered.\n"); -#ifdef SAFE_MIXED - if (current_drive->has_data>1) RETURN_UP(-EBUSY); -#endif /* SAFE_MIXED */ - i=cc_Pause_Resume(1); - current_drive->audio_state=0; -#if 0 - cc_DriveReset(); -#endif - RETURN_UP(i); - - case CDROMSTART: /* Spin up the drive */ - msg(DBG_IOC,"ioctl: CDROMSTART entered.\n"); - cc_SpinUp(); - current_drive->audio_state=0; - RETURN_UP(0); - - case CDROMVOLCTRL: /* Volume control */ - msg(DBG_IOC,"ioctl: CDROMVOLCTRL entered.\n"); - memcpy(&volctrl,(char *) arg,sizeof(volctrl)); - current_drive->vol_chan0=0; - current_drive->vol_ctrl0=volctrl.channel0; - current_drive->vol_chan1=1; - current_drive->vol_ctrl1=volctrl.channel1; - i=cc_SetVolume(); - RETURN_UP(0); - - case CDROMVOLREAD: /* read Volume settings from drive */ - msg(DBG_IOC,"ioctl: CDROMVOLREAD entered.\n"); - st=cc_GetVolume(); - if (st<0) RETURN_UP(st); - volctrl.channel0=current_drive->vol_ctrl0; - volctrl.channel1=current_drive->vol_ctrl1; - volctrl.channel2=0; - volctrl.channel2=0; - memcpy((void *)arg,&volctrl,sizeof(volctrl)); - RETURN_UP(0); - - case CDROMSUBCHNL: /* Get subchannel info */ - msg(DBG_IOS,"ioctl: CDROMSUBCHNL entered.\n"); - /* Bogus, I can do better than this! --AJK - if ((st_spinning)||(!subq_valid)) { - i=cc_ReadSubQ(); - if (i<0) RETURN_UP(-EIO); - } - */ - i=cc_ReadSubQ(); - if (i<0) { - j=cc_ReadError(); /* clear out error status from drive */ - current_drive->audio_state=CDROM_AUDIO_NO_STATUS; - /* get and set the disk state here, - probably not the right place, but who cares! - It makes it work properly! --AJK */ - if (current_drive->CD_changed==0xFF) { - msg(DBG_000,"Disk changed detect\n"); - current_drive->diskstate_flags &= ~cd_size_bit; - } - RETURN_UP(-EIO); - } - if (current_drive->CD_changed==0xFF) { - /* reread the TOC because the disk has changed! --AJK */ - msg(DBG_000,"Disk changed STILL detected, rereading TOC!\n"); - i=DiskInfo(); - if(i==0) { - current_drive->CD_changed=0x00; /* cd has changed, procede, */ - RETURN_UP(-EIO); /* and get TOC, etc on next try! --AJK */ - } else { - RETURN_UP(-EIO); /* we weren't ready yet! --AJK */ - } - } - memcpy(&SC, (void *) arg, sizeof(struct cdrom_subchnl)); - /* - This virtual crap is very bogus! - It doesn't detect when the cd is done playing audio! - Lets do this right with proper hardware register reading! - */ - cc_ReadStatus(); - i=ResponseStatus(); - msg(DBG_000,"Drive Status: door_locked =%d.\n", st_door_locked); - msg(DBG_000,"Drive Status: door_closed =%d.\n", st_door_closed); - msg(DBG_000,"Drive Status: caddy_in =%d.\n", st_caddy_in); - msg(DBG_000,"Drive Status: disk_ok =%d.\n", st_diskok); - msg(DBG_000,"Drive Status: spinning =%d.\n", st_spinning); - msg(DBG_000,"Drive Status: busy =%d.\n", st_busy); - /* st_busy indicates if it's _ACTUALLY_ playing audio */ - switch (current_drive->audio_state) - { - case audio_playing: - if(st_busy==0) { - /* CD has stopped playing audio --AJK */ - current_drive->audio_state=audio_completed; - SC.cdsc_audiostatus=CDROM_AUDIO_COMPLETED; - } else { - SC.cdsc_audiostatus=CDROM_AUDIO_PLAY; - } - break; - case audio_pausing: - SC.cdsc_audiostatus=CDROM_AUDIO_PAUSED; - break; - case audio_completed: - SC.cdsc_audiostatus=CDROM_AUDIO_COMPLETED; - break; - default: - SC.cdsc_audiostatus=CDROM_AUDIO_NO_STATUS; - break; - } - SC.cdsc_adr=current_drive->SubQ_ctl_adr; - SC.cdsc_ctrl=current_drive->SubQ_ctl_adr>>4; - SC.cdsc_trk=bcd2bin(current_drive->SubQ_trk); - SC.cdsc_ind=bcd2bin(current_drive->SubQ_pnt_idx); - if (SC.cdsc_format==CDROM_LBA) - { - SC.cdsc_absaddr.lba=msf2blk(current_drive->SubQ_run_tot); - SC.cdsc_reladdr.lba=msf2blk(current_drive->SubQ_run_trk); - } - else /* not only if (SC.cdsc_format==CDROM_MSF) */ - { - SC.cdsc_absaddr.msf.minute=(current_drive->SubQ_run_tot>>16)&0x00FF; - SC.cdsc_absaddr.msf.second=(current_drive->SubQ_run_tot>>8)&0x00FF; - SC.cdsc_absaddr.msf.frame=current_drive->SubQ_run_tot&0x00FF; - SC.cdsc_reladdr.msf.minute=(current_drive->SubQ_run_trk>>16)&0x00FF; - SC.cdsc_reladdr.msf.second=(current_drive->SubQ_run_trk>>8)&0x00FF; - SC.cdsc_reladdr.msf.frame=current_drive->SubQ_run_trk&0x00FF; - } - memcpy((void *) arg, &SC, sizeof(struct cdrom_subchnl)); - msg(DBG_IOS,"CDROMSUBCHNL: %1X %02X %08X %08X %02X %02X %06X %06X\n", - SC.cdsc_format,SC.cdsc_audiostatus, - SC.cdsc_adr,SC.cdsc_ctrl, - SC.cdsc_trk,SC.cdsc_ind, - SC.cdsc_absaddr,SC.cdsc_reladdr); - RETURN_UP(0); - - default: - msg(DBG_IOC,"ioctl: unknown function request %04X\n", cmd); - RETURN_UP(-EINVAL); - } /* end switch(cmd) */ -} -/*==========================================================================*/ -/* - * Take care of the different block sizes between cdrom and Linux. - */ -static void sbp_transfer(struct request *req) -{ - long offs; - - while ( (req->nr_sectors > 0) && - (req->sector/4 >= current_drive->sbp_first_frame) && - (req->sector/4 <= current_drive->sbp_last_frame) ) - { - offs = (req->sector - current_drive->sbp_first_frame * 4) * 512; - memcpy(req->buffer, current_drive->sbp_buf + offs, 512); - req->nr_sectors--; - req->sector++; - req->buffer += 512; - } -} -/*==========================================================================*/ -/* - * special end_request for sbpcd to solve CURRENT==NULL bug. (GTL) - * GTL = Gonzalo Tornaria <tornaria@cmat.edu.uy> - * - * This is a kludge so we don't need to modify end_request. - * We put the req we take out after INIT_REQUEST in the requests list, - * so that end_request will discard it. - * - * The bug could be present in other block devices, perhaps we - * should modify INIT_REQUEST and end_request instead, and - * change every block device.. - * - * Could be a race here?? Could e.g. a timer interrupt schedule() us? - * If so, we should copy end_request here, and do it right.. (or - * modify end_request and the block devices). - * - * In any case, the race here would be much small than it was, and - * I couldn't reproduce.. - * - * The race could be: suppose CURRENT==NULL. We put our req in the list, - * and we are scheduled. Other process takes over, and gets into - * do_sbpcd_request. It sees CURRENT!=NULL (it is == to our req), so - * proceeds. It ends, so CURRENT is now NULL.. Now we awake somewhere in - * end_request, but now CURRENT==NULL... oops! - * - */ -#undef DEBUG_GTL - -/*==========================================================================*/ -/* - * I/O request routine, called from Linux kernel. - */ -static void do_sbpcd_request(request_queue_t * q) -{ - u_int block; - u_int nsect; - int status_tries, data_tries; - struct request *req; - struct sbpcd_drive *p; -#ifdef DEBUG_GTL - static int xx_nr=0; - int xnr; -#endif - - request_loop: -#ifdef DEBUG_GTL - xnr=++xx_nr; - - req = elv_next_request(q); - - if (!req) - { - printk( "do_sbpcd_request[%di](NULL), Pid:%d, Time:%li\n", - xnr, current->pid, jiffies); - printk( "do_sbpcd_request[%do](NULL) end 0 (null), Time:%li\n", - xnr, jiffies); - return; - } - - printk(" do_sbpcd_request[%di](%p:%ld+%ld), Pid:%d, Time:%li\n", - xnr, req, req->sector, req->nr_sectors, current->pid, jiffies); -#endif - - req = elv_next_request(q); /* take out our request so no other */ - if (!req) - return; - - if (req -> sector == -1) - end_request(req, 0); - spin_unlock_irq(q->queue_lock); - - down(&ioctl_read_sem); - if (rq_data_dir(elv_next_request(q)) != READ) - { - msg(DBG_INF, "bad cmd %d\n", req->cmd[0]); - goto err_done; - } - p = req->rq_disk->private_data; -#if OLD_BUSY - while (busy_audio) sbp_sleep(HZ); /* wait a bit */ - busy_data=1; -#endif /* OLD_BUSY */ - - if (p->audio_state==audio_playing) goto err_done; - if (p != current_drive) - switch_drive(p); - - block = req->sector; /* always numbered as 512-byte-pieces */ - nsect = req->nr_sectors; /* always counted as 512-byte-pieces */ - - msg(DBG_BSZ,"read sector %d (%d sectors)\n", block, nsect); -#if 0 - msg(DBG_MUL,"read LBA %d\n", block/4); -#endif - - sbp_transfer(req); - /* if we satisfied the request from the buffer, we're done. */ - if (req->nr_sectors == 0) - { -#ifdef DEBUG_GTL - printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 2, Time:%li\n", - xnr, req, req->sector, req->nr_sectors, jiffies); -#endif - up(&ioctl_read_sem); - spin_lock_irq(q->queue_lock); - end_request(req, 1); - goto request_loop; - } - -#ifdef FUTURE - i=prepare(0,0); /* at moment not really a hassle check, but ... */ - if (i!=0) - msg(DBG_INF,"\"prepare\" tells error %d -- ignored\n", i); -#endif /* FUTURE */ - - if (!st_spinning) cc_SpinUp(); - - for (data_tries=n_retries; data_tries > 0; data_tries--) - { - for (status_tries=3; status_tries > 0; status_tries--) - { - flags_cmd_out |= f_respo3; - cc_ReadStatus(); - if (sbp_status() != 0) break; - if (st_check) cc_ReadError(); - sbp_sleep(1); /* wait a bit, try again */ - } - if (status_tries == 0) - { - msg(DBG_INF,"sbp_status: failed after 3 tries in line %d\n", __LINE__); - break; - } - - sbp_read_cmd(req); - sbp_sleep(0); - if (sbp_data(req) != 0) - { -#ifdef SAFE_MIXED - current_drive->has_data=2; /* is really a data disk */ -#endif /* SAFE_MIXED */ -#ifdef DEBUG_GTL - printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 3, Time:%li\n", - xnr, req, req->sector, req->nr_sectors, jiffies); -#endif - up(&ioctl_read_sem); - spin_lock_irq(q->queue_lock); - end_request(req, 1); - goto request_loop; - } - } - - err_done: -#if OLD_BUSY - busy_data=0; -#endif /* OLD_BUSY */ -#ifdef DEBUG_GTL - printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 4 (error), Time:%li\n", - xnr, req, req->sector, req->nr_sectors, jiffies); -#endif - up(&ioctl_read_sem); - sbp_sleep(0); /* wait a bit, try again */ - spin_lock_irq(q->queue_lock); - end_request(req, 0); - goto request_loop; -} -/*==========================================================================*/ -/* - * build and send the READ command. - */ -static void sbp_read_cmd(struct request *req) -{ -#undef OLD - - int i; - int block; - - current_drive->sbp_first_frame=current_drive->sbp_last_frame=-1; /* purge buffer */ - current_drive->sbp_current = 0; - block=req->sector/4; - if (block+current_drive->sbp_bufsiz <= current_drive->CDsize_frm) - current_drive->sbp_read_frames = current_drive->sbp_bufsiz; - else - { - current_drive->sbp_read_frames=current_drive->CDsize_frm-block; - /* avoid reading past end of data */ - if (current_drive->sbp_read_frames < 1) - { - msg(DBG_INF,"requested frame %d, CD size %d ???\n", - block, current_drive->CDsize_frm); - current_drive->sbp_read_frames=1; - } - } - - flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | f_obey_p_check; - clr_cmdbuf(); - if (famV_drive) - { - drvcmd[0]=CMDV_READ; - lba2msf(block,&drvcmd[1]); /* msf-bcd format required */ - bin2bcdx(&drvcmd[1]); - bin2bcdx(&drvcmd[2]); - bin2bcdx(&drvcmd[3]); - drvcmd[4]=current_drive->sbp_read_frames>>8; - drvcmd[5]=current_drive->sbp_read_frames&0xff; - drvcmd[6]=0x02; /* flag "msf-bcd" */ - } - else if (fam0L_drive) - { - flags_cmd_out |= f_lopsta | f_getsta | f_bit1; - if (current_drive->xa_byte==0x20) - { - cmd_type=READ_M2; - drvcmd[0]=CMD0_READ_XA; /* "read XA frames", old drives */ - drvcmd[1]=(block>>16)&0x0ff; - drvcmd[2]=(block>>8)&0x0ff; - drvcmd[3]=block&0x0ff; - drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff; - drvcmd[5]=current_drive->sbp_read_frames&0x0ff; - } - else - { - drvcmd[0]=CMD0_READ; /* "read frames", old drives */ - if (current_drive->drv_type>=drv_201) - { - lba2msf(block,&drvcmd[1]); /* msf-bcd format required */ - bin2bcdx(&drvcmd[1]); - bin2bcdx(&drvcmd[2]); - bin2bcdx(&drvcmd[3]); - } - else - { - drvcmd[1]=(block>>16)&0x0ff; - drvcmd[2]=(block>>8)&0x0ff; - drvcmd[3]=block&0x0ff; - } - drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff; - drvcmd[5]=current_drive->sbp_read_frames&0x0ff; - drvcmd[6]=(current_drive->drv_type<drv_201)?0:2; /* flag "lba or msf-bcd format" */ - } - } - else if (fam1_drive) - { - drvcmd[0]=CMD1_READ; - lba2msf(block,&drvcmd[1]); /* msf-bin format required */ - drvcmd[5]=(current_drive->sbp_read_frames>>8)&0x0ff; - drvcmd[6]=current_drive->sbp_read_frames&0x0ff; - } - else if (fam2_drive) - { - drvcmd[0]=CMD2_READ; - lba2msf(block,&drvcmd[1]); /* msf-bin format required */ - drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff; - drvcmd[5]=current_drive->sbp_read_frames&0x0ff; - drvcmd[6]=0x02; - } - else if (famT_drive) - { - drvcmd[0]=CMDT_READ; - drvcmd[2]=(block>>24)&0x0ff; - drvcmd[3]=(block>>16)&0x0ff; - drvcmd[4]=(block>>8)&0x0ff; - drvcmd[5]=block&0x0ff; - drvcmd[7]=(current_drive->sbp_read_frames>>8)&0x0ff; - drvcmd[8]=current_drive->sbp_read_frames&0x0ff; - } - flags_cmd_out=f_putcmd; - response_count=0; - i=cmd_out(); - if (i<0) msg(DBG_INF,"error giving READ command: %0d\n", i); - return; -} -/*==========================================================================*/ -/* - * Check the completion of the read-data command. On success, read - * the current_drive->sbp_bufsiz * 2048 bytes of data from the disk into buffer. - */ -static int sbp_data(struct request *req) -{ - int i=0, j=0, l, frame; - u_int try=0; - u_long timeout; - u_char *p; - u_int data_tries = 0; - u_int data_waits = 0; - u_int data_retrying = 0; - int error_flag; - int xa_count; - int max_latency; - int success; - int wait; - int duration; - - error_flag=0; - success=0; -#if LONG_TIMING - max_latency=9*HZ; -#else - if (current_drive->f_multisession) max_latency=15*HZ; - else max_latency=5*HZ; -#endif - duration=jiffies; - for (frame=0;frame<current_drive->sbp_read_frames&&!error_flag; frame++) - { - SBPCD_CLI; - - del_timer(&data_timer); - data_timer.expires=jiffies+max_latency; - timed_out_data=0; - add_timer(&data_timer); - while (!timed_out_data) - { - if (current_drive->f_multisession) try=maxtim_data*4; - else try=maxtim_data; - msg(DBG_000,"sbp_data: CDi_status loop: try=%d.\n",try); - for ( ; try!=0;try--) - { - j=inb(CDi_status); - if (!(j&s_not_data_ready)) break; - if (!(j&s_not_result_ready)) break; - if (fam0LV_drive) if (j&s_attention) break; - } - if (!(j&s_not_data_ready)) goto data_ready; - if (try==0) - { - if (data_retrying == 0) data_waits++; - data_retrying = 1; - msg(DBG_000,"sbp_data: CDi_status loop: sleeping.\n"); - sbp_sleep(1); - try = 1; - } - } - msg(DBG_INF,"sbp_data: CDi_status loop expired.\n"); - data_ready: - del_timer(&data_timer); - - if (timed_out_data) - { - msg(DBG_INF,"sbp_data: CDi_status timeout (timed_out_data) (%02X).\n", j); - error_flag++; - } - if (try==0) - { - msg(DBG_INF,"sbp_data: CDi_status timeout (try=0) (%02X).\n", j); - error_flag++; - } - if (!(j&s_not_result_ready)) - { - msg(DBG_INF, "sbp_data: RESULT_READY where DATA_READY awaited (%02X).\n", j); - response_count=20; - j=ResponseInfo(); - j=inb(CDi_status); - } - if (j&s_not_data_ready) - { - if ((current_drive->ored_ctl_adr&0x40)==0) - msg(DBG_INF, "CD contains no data tracks.\n"); - else msg(DBG_INF, "sbp_data: DATA_READY timeout (%02X).\n", j); - error_flag++; - } - SBPCD_STI; - if (error_flag) break; - - msg(DBG_000, "sbp_data: beginning to read.\n"); - p = current_drive->sbp_buf + frame * CD_FRAMESIZE; - if (sbpro_type==1) OUT(CDo_sel_i_d,1); - if (cmd_type==READ_M2) { - if (do_16bit) insw(CDi_data, xa_head_buf, CD_XA_HEAD>>1); - else insb(CDi_data, xa_head_buf, CD_XA_HEAD); - } - if (do_16bit) insw(CDi_data, p, CD_FRAMESIZE>>1); - else insb(CDi_data, p, CD_FRAMESIZE); - if (cmd_type==READ_M2) { - if (do_16bit) insw(CDi_data, xa_tail_buf, CD_XA_TAIL>>1); - else insb(CDi_data, xa_tail_buf, CD_XA_TAIL); - } - current_drive->sbp_current++; - if (sbpro_type==1) OUT(CDo_sel_i_d,0); - if (cmd_type==READ_M2) - { - for (xa_count=0;xa_count<CD_XA_HEAD;xa_count++) - sprintf(&msgbuf[xa_count*3], " %02X", xa_head_buf[xa_count]); - msgbuf[xa_count*3]=0; - msg(DBG_XA1,"xa head:%s\n", msgbuf); - } - data_retrying = 0; - data_tries++; - if (data_tries >= 1000) - { - msg(DBG_INF,"sbp_data() statistics: %d waits in %d frames.\n", data_waits, data_tries); - data_waits = data_tries = 0; - } - } - duration=jiffies-duration; - msg(DBG_TEA,"time to read %d frames: %d jiffies .\n",frame,duration); - if (famT_drive) - { - wait=8; - do - { - if (teac==2) - { - if ((i=CDi_stat_loop_T()) == -1) break; - } - else - { - sbp_sleep(1); - OUT(CDo_sel_i_d,0); - i=inb(CDi_status); - } - if (!(i&s_not_data_ready)) - { - OUT(CDo_sel_i_d,1); - j=0; - do - { - if (do_16bit) i=inw(CDi_data); - else i=inb(CDi_data); - j++; - i=inb(CDi_status); - } - while (!(i&s_not_data_ready)); - msg(DBG_TEA, "==========too much data (%d bytes/words)==============.\n", j); - } - if (!(i&s_not_result_ready)) - { - OUT(CDo_sel_i_d,0); - l=0; - do - { - infobuf[l++]=inb(CDi_info); - i=inb(CDi_status); - } - while (!(i&s_not_result_ready)); - if (infobuf[0]==0x00) success=1; -#if 1 - for (j=0;j<l;j++) sprintf(&msgbuf[j*3], " %02X", infobuf[j]); - msgbuf[j*3]=0; - msg(DBG_TEA,"sbp_data info response:%s\n", msgbuf); -#endif - if (infobuf[0]==0x02) - { - error_flag++; - do - { - ++recursion; - if (recursion>1) msg(DBG_TEA,"cmd_out_T READ_ERR recursion (sbp_data): %d !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n",recursion); - else msg(DBG_TEA,"sbp_data: CMDT_READ_ERR necessary.\n"); - clr_cmdbuf(); - drvcmd[0]=CMDT_READ_ERR; - j=cmd_out_T(); /* !!! recursive here !!! */ - --recursion; - sbp_sleep(1); - } - while (j<0); - current_drive->error_state=infobuf[2]; - current_drive->b3=infobuf[3]; - current_drive->b4=infobuf[4]; - } - break; - } - else - { -#if 0 - msg(DBG_TEA, "============= waiting for result=================.\n"); - sbp_sleep(1); -#endif - } - } - while (wait--); - } - - if (error_flag) /* must have been spurious D_RDY or (ATTN&&!D_RDY) */ - { - msg(DBG_TEA, "================error flag: %d=================.\n", error_flag); - msg(DBG_INF,"sbp_data: read aborted by drive.\n"); -#if 1 - i=cc_DriveReset(); /* ugly fix to prevent a hang */ -#else - i=cc_ReadError(); -#endif - return (0); - } - - if (fam0LV_drive) - { - SBPCD_CLI; - i=maxtim_data; - for (timeout=jiffies+HZ; time_before(jiffies, timeout); timeout--) - { - for ( ;i!=0;i--) - { - j=inb(CDi_status); - if (!(j&s_not_data_ready)) break; - if (!(j&s_not_result_ready)) break; - if (j&s_attention) break; - } - if (i != 0 || time_after_eq(jiffies, timeout)) break; - sbp_sleep(0); - i = 1; - } - if (i==0) msg(DBG_INF,"status timeout after READ.\n"); - if (!(j&s_attention)) - { - msg(DBG_INF,"sbp_data: timeout waiting DRV_ATTN - retrying.\n"); - i=cc_DriveReset(); /* ugly fix to prevent a hang */ - SBPCD_STI; - return (0); - } - SBPCD_STI; - } - -#if 0 - if (!success) -#endif - do - { - if (fam0LV_drive) cc_ReadStatus(); -#if 1 - if (famT_drive) msg(DBG_TEA, "================before ResponseStatus=================.\n", i); -#endif - i=ResponseStatus(); /* builds status_bits, returns orig. status (old) or faked p_success (new) */ -#if 1 - if (famT_drive) msg(DBG_TEA, "================ResponseStatus: %d=================.\n", i); -#endif - if (i<0) - { - msg(DBG_INF,"bad cc_ReadStatus after read: %02X\n", current_drive->status_bits); - return (0); - } - } - while ((fam0LV_drive)&&(!st_check)&&(!(i&p_success))); - if (st_check) - { - i=cc_ReadError(); - msg(DBG_INF,"cc_ReadError was necessary after read: %d\n",i); - return (0); - } - if (fatal_err) - { - fatal_err=0; - current_drive->sbp_first_frame=current_drive->sbp_last_frame=-1; /* purge buffer */ - current_drive->sbp_current = 0; - msg(DBG_INF,"sbp_data: fatal_err - retrying.\n"); - return (0); - } - - current_drive->sbp_first_frame = req -> sector / 4; - current_drive->sbp_last_frame = current_drive->sbp_first_frame + current_drive->sbp_read_frames - 1; - sbp_transfer(req); - return (1); -} -/*==========================================================================*/ - -static int sbpcd_block_open(struct inode *inode, struct file *file) -{ - struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data; - return cdrom_open(p->sbpcd_infop, inode, file); -} - -static int sbpcd_block_release(struct inode *inode, struct file *file) -{ - struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data; - return cdrom_release(p->sbpcd_infop, file); -} - -static int sbpcd_block_ioctl(struct inode *inode, struct file *file, - unsigned cmd, unsigned long arg) -{ - struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data; - struct cdrom_device_info *cdi = p->sbpcd_infop; - int ret, i; - - ret = cdrom_ioctl(file, p->sbpcd_infop, inode, cmd, arg); - if (ret != -ENOSYS) - return ret; - - msg(DBG_IO2,"ioctl(%s, 0x%08lX, 0x%08lX)\n", cdi->name, cmd, arg); - if (p->drv_id==-1) { - msg(DBG_INF, "ioctl: bad device: %s\n", cdi->name); - return (-ENXIO); /* no such drive */ - } - down(&ioctl_read_sem); - if (p != current_drive) - switch_drive(p); - - msg(DBG_IO2,"ioctl: device %s, request %04X\n",cdi->name,cmd); - switch (cmd) /* Sun-compatible */ - { - case DDIOCSDBG: /* DDI Debug */ - if (!capable(CAP_SYS_ADMIN)) RETURN_UP(-EPERM); - i=sbpcd_dbg_ioctl(arg,1); - RETURN_UP(i); - case CDROMRESET: /* hard reset the drive */ - msg(DBG_IOC,"ioctl: CDROMRESET entered.\n"); - i=DriveReset(); - current_drive->audio_state=0; - RETURN_UP(i); - - case CDROMREADMODE1: - msg(DBG_IOC,"ioctl: CDROMREADMODE1 requested.\n"); -#ifdef SAFE_MIXED - if (current_drive->has_data>1) RETURN_UP(-EBUSY); -#endif /* SAFE_MIXED */ - cc_ModeSelect(CD_FRAMESIZE); - cc_ModeSense(); - current_drive->mode=READ_M1; - RETURN_UP(0); - - case CDROMREADMODE2: /* not usable at the moment */ - msg(DBG_IOC,"ioctl: CDROMREADMODE2 requested.\n"); -#ifdef SAFE_MIXED - if (current_drive->has_data>1) RETURN_UP(-EBUSY); -#endif /* SAFE_MIXED */ - cc_ModeSelect(CD_FRAMESIZE_RAW1); - cc_ModeSense(); - current_drive->mode=READ_M2; - RETURN_UP(0); - - case CDROMAUDIOBUFSIZ: /* configure the audio buffer size */ - msg(DBG_IOC,"ioctl: CDROMAUDIOBUFSIZ entered.\n"); - if (current_drive->sbp_audsiz>0) - vfree(current_drive->aud_buf); - current_drive->aud_buf=NULL; - current_drive->sbp_audsiz=arg; - - if (current_drive->sbp_audsiz>16) - { - current_drive->sbp_audsiz = 0; - RETURN_UP(current_drive->sbp_audsiz); - } - - if (current_drive->sbp_audsiz>0) - { - current_drive->aud_buf=(u_char *) vmalloc(current_drive->sbp_audsiz*CD_FRAMESIZE_RAW); - if (current_drive->aud_buf==NULL) - { - msg(DBG_INF,"audio buffer (%d frames) not available.\n",current_drive->sbp_audsiz); - current_drive->sbp_audsiz=0; - } - else msg(DBG_INF,"audio buffer size: %d frames.\n",current_drive->sbp_audsiz); - } - RETURN_UP(current_drive->sbp_audsiz); - - case CDROMREADAUDIO: - { /* start of CDROMREADAUDIO */ - int i=0, j=0, frame, block=0; - u_int try=0; - u_long timeout; - u_char *p; - u_int data_tries = 0; - u_int data_waits = 0; - u_int data_retrying = 0; - int status_tries; - int error_flag; - - msg(DBG_IOC,"ioctl: CDROMREADAUDIO entered.\n"); - if (fam0_drive) RETURN_UP(-EINVAL); - if (famL_drive) RETURN_UP(-EINVAL); - if (famV_drive) RETURN_UP(-EINVAL); - if (famT_drive) RETURN_UP(-EINVAL); -#ifdef SAFE_MIXED - if (current_drive->has_data>1) RETURN_UP(-EBUSY); -#endif /* SAFE_MIXED */ - if (current_drive->aud_buf==NULL) RETURN_UP(-EINVAL); - if (copy_from_user(&read_audio, (void __user *)arg, - sizeof(struct cdrom_read_audio))) - RETURN_UP(-EFAULT); - if (read_audio.nframes < 0 || read_audio.nframes>current_drive->sbp_audsiz) RETURN_UP(-EINVAL); - if (!access_ok(VERIFY_WRITE, read_audio.buf, - read_audio.nframes*CD_FRAMESIZE_RAW)) - RETURN_UP(-EFAULT); - - if (read_audio.addr_format==CDROM_MSF) /* MSF-bin specification of where to start */ - block=msf2lba(&read_audio.addr.msf.minute); - else if (read_audio.addr_format==CDROM_LBA) /* lba specification of where to start */ - block=read_audio.addr.lba; - else RETURN_UP(-EINVAL); -#if 000 - i=cc_SetSpeed(speed_150,0,0); - if (i) msg(DBG_AUD,"read_audio: SetSpeed error %d\n", i); -#endif - msg(DBG_AUD,"read_audio: lba: %d, msf: %06X\n", - block, blk2msf(block)); - msg(DBG_AUD,"read_audio: before cc_ReadStatus.\n"); -#if OLD_BUSY - while (busy_data) sbp_sleep(HZ/10); /* wait a bit */ - busy_audio=1; -#endif /* OLD_BUSY */ - error_flag=0; - for (data_tries=5; data_tries>0; data_tries--) - { - msg(DBG_AUD,"data_tries=%d ...\n", data_tries); - current_drive->mode=READ_AU; - cc_ModeSelect(CD_FRAMESIZE_RAW); - cc_ModeSense(); - for (status_tries=3; status_tries > 0; status_tries--) - { - flags_cmd_out |= f_respo3; - cc_ReadStatus(); - if (sbp_status() != 0) break; - if (st_check) cc_ReadError(); - sbp_sleep(1); /* wait a bit, try again */ - } - if (status_tries == 0) - { - msg(DBG_AUD,"read_audio: sbp_status: failed after 3 tries in line %d.\n", __LINE__); - continue; - } - msg(DBG_AUD,"read_audio: sbp_status: ok.\n"); - - flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | f_obey_p_check; - if (fam0L_drive) - { - flags_cmd_out |= f_lopsta | f_getsta | f_bit1; - cmd_type=READ_M2; - drvcmd[0]=CMD0_READ_XA; /* "read XA frames", old drives */ - drvcmd[1]=(block>>16)&0x000000ff; - drvcmd[2]=(block>>8)&0x000000ff; - drvcmd[3]=block&0x000000ff; - drvcmd[4]=0; - drvcmd[5]=read_audio.nframes; /* # of frames */ - drvcmd[6]=0; - } - else if (fam1_drive) - { - drvcmd[0]=CMD1_READ; /* "read frames", new drives */ - lba2msf(block,&drvcmd[1]); /* msf-bin format required */ - drvcmd[4]=0; - drvcmd[5]=0; - drvcmd[6]=read_audio.nframes; /* # of frames */ - } - else if (fam2_drive) - { - drvcmd[0]=CMD2_READ_XA2; - lba2msf(block,&drvcmd[1]); /* msf-bin format required */ - drvcmd[4]=0; - drvcmd[5]=read_audio.nframes; /* # of frames */ - drvcmd[6]=0x11; /* raw mode */ - } - else if (famT_drive) /* CD-55A: not tested yet */ - { - } - msg(DBG_AUD,"read_audio: before giving \"read\" command.\n"); - flags_cmd_out=f_putcmd; - response_count=0; - i=cmd_out(); - if (i<0) msg(DBG_INF,"error giving READ AUDIO command: %0d\n", i); - sbp_sleep(0); - msg(DBG_AUD,"read_audio: after giving \"read\" command.\n"); - for (frame=1;frame<2 && !error_flag; frame++) - { - try=maxtim_data; - for (timeout=jiffies+9*HZ; ; ) - { - for ( ; try!=0;try--) - { - j=inb(CDi_status); - if (!(j&s_not_data_ready)) break; - if (!(j&s_not_result_ready)) break; - if (fam0L_drive) if (j&s_attention) break; - } - if (try != 0 || time_after_eq(jiffies, timeout)) break; - if (data_retrying == 0) data_waits++; - data_retrying = 1; - sbp_sleep(1); - try = 1; - } - if (try==0) - { - msg(DBG_INF,"read_audio: sbp_data: CDi_status timeout.\n"); - error_flag++; - break; - } - msg(DBG_AUD,"read_audio: sbp_data: CDi_status ok.\n"); - if (j&s_not_data_ready) - { - msg(DBG_INF, "read_audio: sbp_data: DATA_READY timeout.\n"); - error_flag++; - break; - } - msg(DBG_AUD,"read_audio: before reading data.\n"); - error_flag=0; - p = current_drive->aud_buf; - if (sbpro_type==1) OUT(CDo_sel_i_d,1); - if (do_16bit) - { - u_short *p2 = (u_short *) p; - - for (; (u_char *) p2 < current_drive->aud_buf + read_audio.nframes*CD_FRAMESIZE_RAW;) - { - if ((inb_p(CDi_status)&s_not_data_ready)) continue; - - /* get one sample */ - *p2++ = inw_p(CDi_data); - *p2++ = inw_p(CDi_data); - } - } else { - for (; p < current_drive->aud_buf + read_audio.nframes*CD_FRAMESIZE_RAW;) - { - if ((inb_p(CDi_status)&s_not_data_ready)) continue; - - /* get one sample */ - *p++ = inb_p(CDi_data); - *p++ = inb_p(CDi_data); - *p++ = inb_p(CDi_data); - *p++ = inb_p(CDi_data); - } - } - if (sbpro_type==1) OUT(CDo_sel_i_d,0); - data_retrying = 0; - } - msg(DBG_AUD,"read_audio: after reading data.\n"); - if (error_flag) /* must have been spurious D_RDY or (ATTN&&!D_RDY) */ - { - msg(DBG_AUD,"read_audio: read aborted by drive\n"); -#if 0000 - i=cc_DriveReset(); /* ugly fix to prevent a hang */ -#else - i=cc_ReadError(); -#endif - continue; - } - if (fam0L_drive) - { - i=maxtim_data; - for (timeout=jiffies+9*HZ; time_before(jiffies, timeout); timeout--) - { - for ( ;i!=0;i--) - { - j=inb(CDi_status); - if (!(j&s_not_data_ready)) break; - if (!(j&s_not_result_ready)) break; - if (j&s_attention) break; - } - if (i != 0 || time_after_eq(jiffies, timeout)) break; - sbp_sleep(0); - i = 1; - } - if (i==0) msg(DBG_AUD,"read_audio: STATUS TIMEOUT AFTER READ"); - if (!(j&s_attention)) - { - msg(DBG_AUD,"read_audio: sbp_data: timeout waiting DRV_ATTN - retrying\n"); - i=cc_DriveReset(); /* ugly fix to prevent a hang */ - continue; - } - } - do - { - if (fam0L_drive) cc_ReadStatus(); - i=ResponseStatus(); /* builds status_bits, returns orig. status (old) or faked p_success (new) */ - if (i<0) { msg(DBG_AUD, - "read_audio: cc_ReadStatus error after read: %02X\n", - current_drive->status_bits); - continue; /* FIXME */ - } - } - while ((fam0L_drive)&&(!st_check)&&(!(i&p_success))); - if (st_check) - { - i=cc_ReadError(); - msg(DBG_AUD,"read_audio: cc_ReadError was necessary after read: %02X\n",i); - continue; - } - if (copy_to_user(read_audio.buf, - current_drive->aud_buf, - read_audio.nframes * CD_FRAMESIZE_RAW)) - RETURN_UP(-EFAULT); - msg(DBG_AUD,"read_audio: copy_to_user done.\n"); - break; - } - cc_ModeSelect(CD_FRAMESIZE); - cc_ModeSense(); - current_drive->mode=READ_M1; -#if OLD_BUSY - busy_audio=0; -#endif /* OLD_BUSY */ - if (data_tries == 0) - { - msg(DBG_AUD,"read_audio: failed after 5 tries in line %d.\n", __LINE__); - RETURN_UP(-EIO); - } - msg(DBG_AUD,"read_audio: successful return.\n"); - RETURN_UP(0); - } /* end of CDROMREADAUDIO */ - - default: - msg(DBG_IOC,"ioctl: unknown function request %04X\n", cmd); - RETURN_UP(-EINVAL); - } /* end switch(cmd) */ -} - -static int sbpcd_block_media_changed(struct gendisk *disk) -{ - struct sbpcd_drive *p = disk->private_data; - return cdrom_media_changed(p->sbpcd_infop); -} - -static struct block_device_operations sbpcd_bdops = -{ - .owner = THIS_MODULE, - .open = sbpcd_block_open, - .release = sbpcd_block_release, - .ioctl = sbpcd_block_ioctl, - .media_changed = sbpcd_block_media_changed, -}; -/*==========================================================================*/ -/* - * Open the device special file. Check that a disk is in. Read TOC. - */ -static int sbpcd_open(struct cdrom_device_info *cdi, int purpose) -{ - struct sbpcd_drive *p = cdi->handle; - - down(&ioctl_read_sem); - switch_drive(p); - - /* - * try to keep an "open" counter here and lock the door if 0->1. - */ - msg(DBG_LCK,"open_count: %d -> %d\n", - current_drive->open_count,current_drive->open_count+1); - if (++current_drive->open_count<=1) - { - int i; - i=LockDoor(); - current_drive->open_count=1; - if (famT_drive) msg(DBG_TEA,"sbpcd_open: before i=DiskInfo();.\n"); - i=DiskInfo(); - if (famT_drive) msg(DBG_TEA,"sbpcd_open: after i=DiskInfo();.\n"); - if ((current_drive->ored_ctl_adr&0x40)==0) - { - msg(DBG_INF,"CD contains no data tracks.\n"); -#ifdef SAFE_MIXED - current_drive->has_data=0; -#endif /* SAFE_MIXED */ - } -#ifdef SAFE_MIXED - else if (current_drive->has_data<1) current_drive->has_data=1; -#endif /* SAFE_MIXED */ - } - if (!st_spinning) cc_SpinUp(); - RETURN_UP(0); -} -/*==========================================================================*/ -/* - * On close, we flush all sbp blocks from the buffer cache. - */ -static void sbpcd_release(struct cdrom_device_info * cdi) -{ - struct sbpcd_drive *p = cdi->handle; - - if (p->drv_id==-1) { - msg(DBG_INF, "release: bad device: %s\n", cdi->name); - return; - } - down(&ioctl_read_sem); - switch_drive(p); - /* - * try to keep an "open" counter here and unlock the door if 1->0. - */ - msg(DBG_LCK,"open_count: %d -> %d\n", - p->open_count,p->open_count-1); - if (p->open_count>-2) /* CDROMEJECT may have been done */ - { - if (--p->open_count<=0) - { - p->sbp_first_frame=p->sbp_last_frame=-1; - if (p->audio_state!=audio_playing) - if (p->f_eject) cc_SpinDown(); - p->diskstate_flags &= ~cd_size_bit; - p->open_count=0; -#ifdef SAFE_MIXED - p->has_data=0; -#endif /* SAFE_MIXED */ - } - } - up(&ioctl_read_sem); - return ; -} -/*==========================================================================*/ -/* - * - */ -static int sbpcd_media_changed( struct cdrom_device_info *cdi, int disc_nr); -static struct cdrom_device_ops sbpcd_dops = { - .open = sbpcd_open, - .release = sbpcd_release, - .drive_status = sbpcd_drive_status, - .media_changed = sbpcd_media_changed, - .tray_move = sbpcd_tray_move, - .lock_door = sbpcd_lock_door, - .select_speed = sbpcd_select_speed, - .get_last_session = sbpcd_get_last_session, - .get_mcn = sbpcd_get_mcn, - .reset = sbpcd_reset, - .audio_ioctl = sbpcd_audio_ioctl, - .capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | - CDC_MULTI_SESSION | CDC_MEDIA_CHANGED | - CDC_MCN | CDC_PLAY_AUDIO, - .n_minors = 1, -}; - -/*==========================================================================*/ -/* - * accept "kernel command line" parameters - * (suggested by Peter MacDonald with SLS 1.03) - * - * This is only implemented for the first controller. Should be enough to - * allow installing with a "strange" distribution kernel. - * - * use: tell LILO: - * sbpcd=0x230,SoundBlaster - * or - * sbpcd=0x300,LaserMate - * or - * sbpcd=0x338,SoundScape - * or - * sbpcd=0x2C0,Teac16bit - * - * (upper/lower case sensitive here - but all-lowercase is ok!!!). - * - * the address value has to be the CDROM PORT ADDRESS - - * not the soundcard base address. - * For the SPEA/SoundScape setup, DO NOT specify the "configuration port" - * address, but the address which is really used for the CDROM (usually 8 - * bytes above). - * - */ - -int sbpcd_setup(char *s) -{ -#ifndef MODULE - int p[4]; - (void)get_options(s, ARRAY_SIZE(p), p); - setup_done++; - msg(DBG_INI,"sbpcd_setup called with %04X,%s\n",p[1], s); - sbpro_type=0; /* default: "LaserMate" */ - if (p[0]>1) sbpro_type=p[2]; - else if (!strcmp(s,str_sb)) sbpro_type=1; - else if (!strcmp(s,str_sb_l)) sbpro_type=1; - else if (!strcmp(s,str_sp)) sbpro_type=2; - else if (!strcmp(s,str_sp_l)) sbpro_type=2; - else if (!strcmp(s,str_ss)) sbpro_type=2; - else if (!strcmp(s,str_ss_l)) sbpro_type=2; - else if (!strcmp(s,str_t16)) sbpro_type=3; - else if (!strcmp(s,str_t16_l)) sbpro_type=3; - if (p[0]>0) sbpcd_ioaddr=p[1]; - if (p[0]>2) max_drives=p[3]; -#else - sbpcd_ioaddr = sbpcd[0]; - sbpro_type = sbpcd[1]; -#endif - - CDo_command=sbpcd_ioaddr; - CDi_info=sbpcd_ioaddr; - CDi_status=sbpcd_ioaddr+1; - CDo_sel_i_d=sbpcd_ioaddr+1; - CDo_reset=sbpcd_ioaddr+2; - CDo_enable=sbpcd_ioaddr+3; - f_16bit=0; - if ((sbpro_type==1)||(sbpro_type==3)) - { - CDi_data=sbpcd_ioaddr; - if (sbpro_type==3) - { - f_16bit=1; - sbpro_type=1; - } - } - else CDi_data=sbpcd_ioaddr+2; - - return 1; -} - -__setup("sbpcd=", sbpcd_setup); - - -/*==========================================================================*/ -/* - * Sequoia S-1000 CD-ROM Interface Configuration - * as used within SPEA Media FX, Ensonic SoundScape and some Reveal cards - * The soundcard has to get jumpered for the interface type "Panasonic" - * (not Sony or Mitsumi) and to get soft-configured for - * -> configuration port address - * -> CDROM port offset (num_ports): has to be 8 here. Possibly this - * offset value determines the interface type (none, Panasonic, - * Mitsumi, Sony). - * The interface uses a configuration port (0x320, 0x330, 0x340, 0x350) - * some bytes below the real CDROM address. - * - * For the Panasonic style (LaserMate) interface and the configuration - * port 0x330, we have to use an offset of 8; so, the real CDROM port - * address is 0x338. - */ -static int __init config_spea(void) -{ - /* - * base address offset between configuration port and CDROM port, - * this probably defines the interface type - * 2 (type=??): 0x00 - * 8 (type=LaserMate):0x10 - * 16 (type=??):0x20 - * 32 (type=??):0x30 - */ - int n_ports=0x10; - - int irq_number=0; /* off:0x00, 2/9:0x01, 7:0x03, 12:0x05, 15:0x07 */ - int dma_channel=0; /* off: 0x00, 0:0x08, 1:0x18, 3:0x38, 5:0x58, 6:0x68 */ - int dack_polarity=0; /* L:0x00, H:0x80 */ - int drq_polarity=0x40; /* L:0x00, H:0x40 */ - int i; - -#define SPEA_REG_1 sbpcd_ioaddr-0x08+4 -#define SPEA_REG_2 sbpcd_ioaddr-0x08+5 - - OUT(SPEA_REG_1,0xFF); - i=inb(SPEA_REG_1); - if (i!=0x0F) - { - msg(DBG_SEQ,"no SPEA interface at %04X present.\n", sbpcd_ioaddr); - return (-1); /* no interface found */ - } - OUT(SPEA_REG_1,0x04); - OUT(SPEA_REG_2,0xC0); - - OUT(SPEA_REG_1,0x05); - OUT(SPEA_REG_2,0x10|drq_polarity|dack_polarity); - -#if 1 -#define SPEA_PATTERN 0x80 -#else -#define SPEA_PATTERN 0x00 -#endif - OUT(SPEA_REG_1,0x06); - OUT(SPEA_REG_2,dma_channel|irq_number|SPEA_PATTERN); - OUT(SPEA_REG_2,dma_channel|irq_number|SPEA_PATTERN); - - OUT(SPEA_REG_1,0x09); - i=(inb(SPEA_REG_2)&0xCF)|n_ports; - OUT(SPEA_REG_2,i); - - sbpro_type = 0; /* acts like a LaserMate interface now */ - msg(DBG_SEQ,"found SoundScape interface at %04X.\n", sbpcd_ioaddr); - return (0); -} - -/*==========================================================================*/ -/* - * Test for presence of drive and initialize it. - * Called once at boot or load time. - */ - -/* FIXME: cleanups after failed allocations are too ugly for words */ -#ifdef MODULE -int __init __sbpcd_init(void) -#else -int __init sbpcd_init(void) -#endif -{ - int i=0, j=0; - int addr[2]={1, CDROM_PORT}; - int port_index; - - sti(); - - msg(DBG_INF,"sbpcd.c %s\n", VERSION); -#ifndef MODULE -#if DISTRIBUTION - if (!setup_done) - { - msg(DBG_INF,"Looking for Matsushita/Panasonic, CreativeLabs, Longshine, TEAC CD-ROM drives\n"); - msg(DBG_INF,"= = = = = = = = = = W A R N I N G = = = = = = = = = =\n"); - msg(DBG_INF,"Auto-Probing can cause a hang (f.e. touching an NE2000 card).\n"); - msg(DBG_INF,"If that happens, you have to reboot and use the\n"); - msg(DBG_INF,"LILO (kernel) command line feature like:\n"); - msg(DBG_INF," LILO boot: ... sbpcd=0x230,SoundBlaster\n"); - msg(DBG_INF,"or like:\n"); - msg(DBG_INF," LILO boot: ... sbpcd=0x300,LaserMate\n"); - msg(DBG_INF,"or like:\n"); - msg(DBG_INF," LILO boot: ... sbpcd=0x338,SoundScape\n"); - msg(DBG_INF,"with your REAL address.\n"); - msg(DBG_INF,"= = = = = = = = = = END of WARNING = = = = = == = = =\n"); - } -#endif /* DISTRIBUTION */ - sbpcd[0]=sbpcd_ioaddr; /* possibly changed by kernel command line */ - sbpcd[1]=sbpro_type; /* possibly changed by kernel command line */ -#endif /* MODULE */ - - for (port_index=0;port_index<NUM_PROBE;port_index+=2) - { - addr[1]=sbpcd[port_index]; - if (addr[1]==0) break; - if (check_region(addr[1],4)) - { - msg(DBG_INF,"check_region: %03X is not free.\n",addr[1]); - continue; - } - if (sbpcd[port_index+1]==2) type=str_sp; - else if (sbpcd[port_index+1]==1) type=str_sb; - else if (sbpcd[port_index+1]==3) type=str_t16; - else type=str_lm; - sbpcd_setup((char *)type); -#if DISTRIBUTION - msg(DBG_INF,"Scanning 0x%X (%s)...\n", CDo_command, type); -#endif /* DISTRIBUTION */ - if (sbpcd[port_index+1]==2) - { - i=config_spea(); - if (i<0) continue; - } -#ifdef PATH_CHECK - if (check_card(addr[1])) continue; -#endif /* PATH_CHECK */ - i=check_drives(); - msg(DBG_INI,"check_drives done.\n"); - if (i>=0) break; /* drive found */ - } /* end of cycling through the set of possible I/O port addresses */ - - if (ndrives==0) - { - msg(DBG_INF, "No drive found.\n"); -#ifdef MODULE - return -EIO; -#else - goto init_done; -#endif /* MODULE */ - } - - if (port_index>0) - { - msg(DBG_INF, "You should read Documentation/cdrom/sbpcd\n"); - msg(DBG_INF, "and then configure sbpcd.h for your hardware.\n"); - } - check_datarate(); - msg(DBG_INI,"check_datarate done.\n"); - - for (j=0;j<NR_SBPCD;j++) - { - struct sbpcd_drive *p = D_S + j; - if (p->drv_id==-1) - continue; - switch_drive(p); -#if 1 - if (!famL_drive) cc_DriveReset(); -#endif - if (!st_spinning) cc_SpinUp(); - p->sbp_first_frame = -1; /* First frame in buffer */ - p->sbp_last_frame = -1; /* Last frame in buffer */ - p->sbp_read_frames = 0; /* Number of frames being read to buffer */ - p->sbp_current = 0; /* Frame being currently read */ - p->CD_changed=1; - p->frame_size=CD_FRAMESIZE; - p->f_eject=0; -#if EJECT - if (!fam0_drive) p->f_eject=1; -#endif /* EJECT */ - cc_ReadStatus(); - i=ResponseStatus(); /* returns orig. status or p_busy_new */ - if (famT_drive) i=ResponseStatus(); /* returns orig. status or p_busy_new */ - if (i<0) - { - if (i!=-402) - msg(DBG_INF,"init: ResponseStatus returns %d.\n",i); - } - else - { - if (st_check) - { - i=cc_ReadError(); - msg(DBG_INI,"init: cc_ReadError returns %d\n",i); - } - } - msg(DBG_INI,"init: first GetStatus: %d\n",i); - msg(DBG_LCS,"init: first GetStatus: error_byte=%d\n", - p->error_byte); - if (p->error_byte==aud_12) - { - timeout=jiffies+2*HZ; - do - { - i=GetStatus(); - msg(DBG_INI,"init: second GetStatus: %02X\n",i); - msg(DBG_LCS, - "init: second GetStatus: error_byte=%d\n", - p->error_byte); - if (i<0) break; - if (!st_caddy_in) break; - } - while ((!st_diskok)||time_after(jiffies, timeout)); - } - i=SetSpeed(); - if (i>=0) p->CD_changed=1; - } - - if (!request_region(CDo_command,4,major_name)) - { - printk(KERN_WARNING "sbpcd: Unable to request region 0x%x\n", CDo_command); - return -EIO; - } - - /* - * Turn on the CD audio channels. - * The addresses are obtained from SOUND_BASE (see sbpcd.h). - */ -#if SOUND_BASE - OUT(MIXER_addr,MIXER_CD_Volume); /* select SB Pro mixer register */ - OUT(MIXER_data,0xCC); /* one nibble per channel, max. value: 0xFF */ -#endif /* SOUND_BASE */ - - if (register_blkdev(MAJOR_NR, major_name)) { -#ifdef MODULE - return -EIO; -#else - goto init_done; -#endif /* MODULE */ - } - - /* - * init error handling is broken beyond belief in this driver... - */ - sbpcd_queue = blk_init_queue(do_sbpcd_request, &sbpcd_lock); - if (!sbpcd_queue) { - release_region(CDo_command,4); - unregister_blkdev(MAJOR_NR, major_name); - return -ENOMEM; - } - - for (j=0;j<NR_SBPCD;j++) - { - struct cdrom_device_info * sbpcd_infop; - struct gendisk *disk; - struct sbpcd_drive *p = D_S + j; - - if (p->drv_id==-1) continue; - switch_drive(p); -#ifdef SAFE_MIXED - p->has_data=0; -#endif /* SAFE_MIXED */ - /* - * allocate memory for the frame buffers - */ - p->aud_buf=NULL; - p->sbp_audsiz=0; - p->sbp_bufsiz=buffers; - if (p->drv_type&drv_fam1) - if (READ_AUDIO>0) - p->sbp_audsiz = READ_AUDIO; - p->sbp_buf=(u_char *) vmalloc(buffers*CD_FRAMESIZE); - if (!p->sbp_buf) { - msg(DBG_INF,"data buffer (%d frames) not available.\n", - buffers); - if ((unregister_blkdev(MAJOR_NR, major_name) == -EINVAL)) - { - printk("Can't unregister %s\n", major_name); - } - release_region(CDo_command,4); - blk_cleanup_queue(sbpcd_queue); - return -EIO; - } -#ifdef MODULE - msg(DBG_INF,"data buffer size: %d frames.\n",buffers); -#endif /* MODULE */ - if (p->sbp_audsiz>0) - { - p->aud_buf=(u_char *) vmalloc(p->sbp_audsiz*CD_FRAMESIZE_RAW); - if (p->aud_buf==NULL) msg(DBG_INF,"audio buffer (%d frames) not available.\n",p->sbp_audsiz); - else msg(DBG_INF,"audio buffer size: %d frames.\n",p->sbp_audsiz); - } - sbpcd_infop = vmalloc(sizeof (struct cdrom_device_info)); - if (sbpcd_infop == NULL) - { - release_region(CDo_command,4); - blk_cleanup_queue(sbpcd_queue); - return -ENOMEM; - } - memset(sbpcd_infop, 0, sizeof(struct cdrom_device_info)); - sbpcd_infop->ops = &sbpcd_dops; - sbpcd_infop->speed = 2; - sbpcd_infop->capacity = 1; - sprintf(sbpcd_infop->name, "sbpcd%d", j); - sbpcd_infop->handle = p; - p->sbpcd_infop = sbpcd_infop; - disk = alloc_disk(1); - disk->major = MAJOR_NR; - disk->first_minor = j; - disk->fops = &sbpcd_bdops; - strcpy(disk->disk_name, sbpcd_infop->name); - disk->flags = GENHD_FL_CD; - p->disk = disk; - if (register_cdrom(sbpcd_infop)) - { - printk(" sbpcd: Unable to register with Uniform CD-ROm driver\n"); - } - disk->private_data = p; - disk->queue = sbpcd_queue; - add_disk(disk); - } - blk_queue_hardsect_size(sbpcd_queue, CD_FRAMESIZE); - -#ifndef MODULE - init_done: -#endif - return 0; -} -/*==========================================================================*/ -#ifdef MODULE -static void sbpcd_exit(void) -{ - int j; - - if ((unregister_blkdev(MAJOR_NR, major_name) == -EINVAL)) - { - msg(DBG_INF, "What's that: can't unregister %s.\n", major_name); - return; - } - release_region(CDo_command,4); - blk_cleanup_queue(sbpcd_queue); - for (j=0;j<NR_SBPCD;j++) - { - if (D_S[j].drv_id==-1) continue; - del_gendisk(D_S[j].disk); - put_disk(D_S[j].disk); - vfree(D_S[j].sbp_buf); - if (D_S[j].sbp_audsiz>0) - vfree(D_S[j].aud_buf); - if ((unregister_cdrom(D_S[j].sbpcd_infop) == -EINVAL)) - { - msg(DBG_INF, "What's that: can't unregister info %s.\n", major_name); - return; - } - vfree(D_S[j].sbpcd_infop); - } - msg(DBG_INF, "%s module released.\n", major_name); -} - - -module_init(__sbpcd_init) /*HACK!*/; -module_exit(sbpcd_exit); - - -#endif /* MODULE */ -static int sbpcd_media_changed(struct cdrom_device_info *cdi, int disc_nr) -{ - struct sbpcd_drive *p = cdi->handle; - msg(DBG_CHK,"media_check (%s) called\n", cdi->name); - - if (p->CD_changed==0xFF) - { - p->CD_changed=0; - msg(DBG_CHK,"medium changed (drive %s)\n", cdi->name); - current_drive->diskstate_flags &= ~toc_bit; - /* we *don't* need invalidate here, it's done by caller */ - current_drive->diskstate_flags &= ~cd_size_bit; -#ifdef SAFE_MIXED - current_drive->has_data=0; -#endif /* SAFE_MIXED */ - - return (1); - } - else - return (0); -} - -MODULE_LICENSE("GPL"); -/* FIXME: Old modules.conf claims MATSUSHITA_CDROM2_MAJOR and CDROM3, but - AFAICT this doesn't support those majors, so why? --RR 30 Jul 2003 */ -MODULE_ALIAS_BLOCKDEV_MAJOR(MATSUSHITA_CDROM_MAJOR); - -/*==========================================================================*/ -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-indent-level: 8 - * c-brace-imaginary-offset: 0 - * c-brace-offset: -8 - * c-argdecl-indent: 8 - * c-label-offset: -8 - * c-continued-statement-offset: 8 - * c-continued-brace-offset: 0 - * End: - */ - diff --git a/drivers/cdrom/sbpcd.h b/drivers/cdrom/sbpcd.h deleted file mode 100644 index 2f2225f13c6..00000000000 --- a/drivers/cdrom/sbpcd.h +++ /dev/null @@ -1,839 +0,0 @@ -/* - * sbpcd.h Specify interface address and interface type here. - */ - -/* - * Attention! This file contains user-serviceable parts! - * I recommend to make use of it... - * If you feel helpless, look into Documentation/cdrom/sbpcd - * (good idea anyway, at least before mailing me). - * - * The definitions for the first controller can get overridden by - * the kernel command line ("lilo boot option"). - * Examples: - * sbpcd=0x300,LaserMate - * or - * sbpcd=0x230,SoundBlaster - * or - * sbpcd=0x338,SoundScape - * or - * sbpcd=0x2C0,Teac16bit - * - * If sbpcd gets used as a module, you can load it with - * insmod sbpcd.o sbpcd=0x300,0 - * or - * insmod sbpcd.o sbpcd=0x230,1 - * or - * insmod sbpcd.o sbpcd=0x338,2 - * or - * insmod sbpcd.o sbpcd=0x2C0,3 - * respective to override the configured address and type. - */ - -/* - * define your CDROM port base address as CDROM_PORT - * and specify the type of your interface card as SBPRO. - * - * address: - * ======== - * SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ... - * LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ... - * SOUNDSCAPE addresses are from the LASERMATE type and range. You have to - * specify the REAL address here, not the configuration port address. Look - * at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let - * sbpcd auto-probe, if you are not firm with the address. - * There are some soundcards on the market with 0x0630, 0x0650, ...; their - * type is not obvious (both types are possible). - * - * example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1. - * if your soundcard has its CDROM port above 0x300, specify - * that address and try SBPRO 0 first. - * if your SoundScape configuration port is at 0x330, specify - * 0x338 and SBPRO 2. - * - * interface type: - * =============== - * set SBPRO to 1 for "true" SoundBlaster card - * set SBPRO to 0 for "compatible" soundcards and - * for "poor" (no sound) interface cards. - * set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards - * set SBPRO to 3 for Teac 16bit interface cards - * - * Almost all "compatible" sound boards need to set SBPRO to 0. - * If SBPRO is set wrong, the drives will get found - but any - * data access will give errors (audio access will work). - * The "OmniCD" no-sound interface card from CreativeLabs and most Teac - * interface cards need SBPRO 1. - * - * sound base: - * =========== - * The SOUND_BASE definition tells if we should try to turn the CD sound - * channels on. It will only be of use regarding soundcards with a SbPro - * compatible mixer. - * - * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels - * #define SOUND_BASE 0 leaves the soundcard untouched - */ -#define CDROM_PORT 0x340 /* <-----------<< port address */ -#define SBPRO 0 /* <-----------<< interface type */ -#define MAX_DRIVES 4 /* set to 1 if the card does not use "drive select" */ -#define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0 */ - -/* - * some more or less user dependent definitions - service them! - */ - -/* Set this to 0 once you have configured your interface definitions right. */ -#define DISTRIBUTION 1 - -/* - * Time to wait after giving a message. - * This gets important if you enable non-standard DBG_xxx flags. - * You will see what happens if you omit the pause or make it - * too short. Be warned! - */ -#define KLOGD_PAUSE 1 - -/* tray control: eject tray if no disk is in */ -#if DISTRIBUTION -#define JUKEBOX 0 -#else -#define JUKEBOX 1 -#endif /* DISTRIBUTION */ - -/* tray control: eject tray after last use */ -#if DISTRIBUTION -#define EJECT 0 -#else -#define EJECT 1 -#endif /* DISTRIBUTION */ - -/* max. number of audio frames to read with one */ -/* request (allocates n* 2352 bytes kernel memory!) */ -/* may be freely adjusted, f.e. 75 (= 1 sec.), at */ -/* runtime by use of the CDROMAUDIOBUFSIZ ioctl. */ -#define READ_AUDIO 0 - -/* Optimizations for the Teac CD-55A drive read performance. - * SBP_TEAC_SPEED can be changed here, or one can set the - * variable "teac" when loading as a module. - * Valid settings are: - * 0 - very slow - the recommended "DISTRIBUTION 1" setup. - * 1 - 2x performance with little overhead. No busy waiting. - * 2 - 4x performance with 5ms overhead per read. Busy wait. - * - * Setting SBP_TEAC_SPEED or the variable 'teac' to anything - * other than 0 may cause problems. If you run into them, first - * change SBP_TEAC_SPEED back to 0 and see if your drive responds - * normally. If yes, you are "allowed" to report your case - to help - * me with the driver, not to solve your hassle. Don´t mail if you - * simply are stuck into your own "tuning" experiments, you know? - */ -#define SBP_TEAC_SPEED 1 - -/*==========================================================================*/ -/*==========================================================================*/ -/* - * nothing to change below here if you are not fully aware what you're doing - */ -#ifndef _LINUX_SBPCD_H - -#define _LINUX_SBPCD_H -/*==========================================================================*/ -/*==========================================================================*/ -/* - * driver's own read_ahead, data mode - */ -#define SBP_BUFFER_FRAMES 8 - -#define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */ -#undef FUTURE -#undef SAFE_MIXED - -#define TEST_UPC 0 -#define SPEA_TEST 0 -#define TEST_STI 0 -#define OLD_BUSY 0 -#undef PATH_CHECK -#ifndef SOUND_BASE -#define SOUND_BASE 0 -#endif -#if DISTRIBUTION -#undef SBP_TEAC_SPEED -#define SBP_TEAC_SPEED 0 -#endif -/*==========================================================================*/ -/* - * DDI interface definitions - * "invented" by Fred N. van Kempen.. - */ -#define DDIOCSDBG 0x9000 - -/*==========================================================================*/ -/* - * "private" IOCTL functions - */ -#define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */ - -/*==========================================================================*/ -/* - * Debug output levels - */ -#define DBG_INF 1 /* necessary information */ -#define DBG_BSZ 2 /* BLOCK_SIZE trace */ -#define DBG_REA 3 /* READ status trace */ -#define DBG_CHK 4 /* MEDIA CHECK trace */ -#define DBG_TIM 5 /* datarate timer test */ -#define DBG_INI 6 /* initialization trace */ -#define DBG_TOC 7 /* tell TocEntry values */ -#define DBG_IOC 8 /* ioctl trace */ -#define DBG_STA 9 /* ResponseStatus() trace */ -#define DBG_ERR 10 /* cc_ReadError() trace */ -#define DBG_CMD 11 /* cmd_out() trace */ -#define DBG_WRN 12 /* give explanation before auto-probing */ -#define DBG_MUL 13 /* multi session code test */ -#define DBG_IDX 14 /* test code for drive_id !=0 */ -#define DBG_IOX 15 /* some special information */ -#define DBG_DID 16 /* drive ID test */ -#define DBG_RES 17 /* drive reset info */ -#define DBG_SPI 18 /* SpinUp test */ -#define DBG_IOS 19 /* ioctl trace: subchannel functions */ -#define DBG_IO2 20 /* ioctl trace: general */ -#define DBG_UPC 21 /* show UPC information */ -#define DBG_XA1 22 /* XA mode debugging */ -#define DBG_LCK 23 /* door (un)lock info */ -#define DBG_SQ1 24 /* dump SubQ frame */ -#define DBG_AUD 25 /* READ AUDIO debugging */ -#define DBG_SEQ 26 /* Sequoia interface configuration trace */ -#define DBG_LCS 27 /* Longshine LCS-7260 debugging trace */ -#define DBG_CD2 28 /* MKE/Funai CD200 debugging trace */ -#define DBG_TEA 29 /* TEAC CD-55A debugging trace */ -#define DBG_ECS 30 /* ECS-AT (Vertos 100) debugging trace */ -#define DBG_000 31 /* unnecessary information */ - -/*==========================================================================*/ -/*==========================================================================*/ - -/* - * bits of flags_cmd_out: - */ -#define f_respo3 0x100 -#define f_putcmd 0x80 -#define f_respo2 0x40 -#define f_lopsta 0x20 -#define f_getsta 0x10 -#define f_ResponseStatus 0x08 -#define f_obey_p_check 0x04 -#define f_bit1 0x02 -#define f_wait_if_busy 0x01 - -/* - * diskstate_flags: - */ -#define x80_bit 0x80 -#define upc_bit 0x40 -#define volume_bit 0x20 -#define toc_bit 0x10 -#define multisession_bit 0x08 -#define cd_size_bit 0x04 -#define subq_bit 0x02 -#define frame_size_bit 0x01 - -/* - * disk states (bits of diskstate_flags): - */ -#define upc_valid (current_drive->diskstate_flags&upc_bit) -#define volume_valid (current_drive->diskstate_flags&volume_bit) -#define toc_valid (current_drive->diskstate_flags&toc_bit) -#define cd_size_valid (current_drive->diskstate_flags&cd_size_bit) -#define subq_valid (current_drive->diskstate_flags&subq_bit) -#define frame_size_valid (current_drive->diskstate_flags&frame_size_bit) - -/* - * the status_bits variable - */ -#define p_success 0x100 -#define p_door_closed 0x80 -#define p_caddy_in 0x40 -#define p_spinning 0x20 -#define p_check 0x10 -#define p_busy_new 0x08 -#define p_door_locked 0x04 -#define p_disk_ok 0x01 - -/* - * LCS-7260 special status result bits: - */ -#define p_lcs_door_locked 0x02 -#define p_lcs_door_closed 0x01 /* probably disk_in */ - -/* - * CR-52x special status result bits: - */ -#define p_caddin_old 0x40 -#define p_success_old 0x08 -#define p_busy_old 0x04 -#define p_bit_1 0x02 /* hopefully unused now */ - -/* - * "generation specific" defs of the status result bits: - */ -#define p0_door_closed 0x80 -#define p0_caddy_in 0x40 -#define p0_spinning 0x20 -#define p0_check 0x10 -#define p0_success 0x08 /* unused */ -#define p0_busy 0x04 -#define p0_bit_1 0x02 /* unused */ -#define p0_disk_ok 0x01 - -#define pL_disk_in 0x40 -#define pL_spinning 0x20 -#define pL_check 0x10 -#define pL_success 0x08 /* unused ?? */ -#define pL_busy 0x04 -#define pL_door_locked 0x02 -#define pL_door_closed 0x01 - -#define pV_door_closed 0x40 -#define pV_spinning 0x20 -#define pV_check 0x10 -#define pV_success 0x08 -#define pV_busy 0x04 -#define pV_door_locked 0x02 -#define pV_disk_ok 0x01 - -#define p1_door_closed 0x80 -#define p1_disk_in 0x40 -#define p1_spinning 0x20 -#define p1_check 0x10 -#define p1_busy 0x08 -#define p1_door_locked 0x04 -#define p1_bit_1 0x02 /* unused */ -#define p1_disk_ok 0x01 - -#define p2_disk_ok 0x80 -#define p2_door_locked 0x40 -#define p2_spinning 0x20 -#define p2_busy2 0x10 -#define p2_busy1 0x08 -#define p2_door_closed 0x04 -#define p2_disk_in 0x02 -#define p2_check 0x01 - -/* - * used drive states: - */ -#define st_door_closed (current_drive->status_bits&p_door_closed) -#define st_caddy_in (current_drive->status_bits&p_caddy_in) -#define st_spinning (current_drive->status_bits&p_spinning) -#define st_check (current_drive->status_bits&p_check) -#define st_busy (current_drive->status_bits&p_busy_new) -#define st_door_locked (current_drive->status_bits&p_door_locked) -#define st_diskok (current_drive->status_bits&p_disk_ok) - -/* - * bits of the CDi_status register: - */ -#define s_not_result_ready 0x04 /* 0: "result ready" */ -#define s_not_data_ready 0x02 /* 0: "data ready" */ -#define s_attention 0x01 /* 1: "attention required" */ -/* - * usable as: - */ -#define DRV_ATTN ((inb(CDi_status)&s_attention)!=0) -#define DATA_READY ((inb(CDi_status)&s_not_data_ready)==0) -#define RESULT_READY ((inb(CDi_status)&s_not_result_ready)==0) - -/* - * drive families and types (firmware versions): - */ -#define drv_fam0 0x0100 /* CR-52x family */ -#define drv_199 (drv_fam0+0x01) /* <200 */ -#define drv_200 (drv_fam0+0x02) /* <201 */ -#define drv_201 (drv_fam0+0x03) /* <210 */ -#define drv_210 (drv_fam0+0x04) /* <211 */ -#define drv_211 (drv_fam0+0x05) /* <300 */ -#define drv_300 (drv_fam0+0x06) /* >=300 */ - -#define drv_fam1 0x0200 /* CR-56x family */ -#define drv_099 (drv_fam1+0x01) /* <100 */ -#define drv_100 (drv_fam1+0x02) /* >=100, only 1.02 and 5.00 known */ - -#define drv_fam2 0x0400 /* CD200 family */ - -#define drv_famT 0x0800 /* TEAC CD-55A */ - -#define drv_famL 0x1000 /* Longshine family */ -#define drv_260 (drv_famL+0x01) /* LCS-7260 */ -#define drv_e1 (drv_famL+0x01) /* LCS-7260, firmware "A E1" */ -#define drv_f4 (drv_famL+0x02) /* LCS-7260, firmware "A4F4" */ - -#define drv_famV 0x2000 /* ECS-AT (vertos-100) family */ -#define drv_at (drv_famV+0x01) /* ECS-AT, firmware "1.00" */ - -#define fam0_drive (current_drive->drv_type&drv_fam0) -#define famL_drive (current_drive->drv_type&drv_famL) -#define famV_drive (current_drive->drv_type&drv_famV) -#define fam1_drive (current_drive->drv_type&drv_fam1) -#define fam2_drive (current_drive->drv_type&drv_fam2) -#define famT_drive (current_drive->drv_type&drv_famT) -#define fam0L_drive (current_drive->drv_type&(drv_fam0|drv_famL)) -#define fam0V_drive (current_drive->drv_type&(drv_fam0|drv_famV)) -#define famLV_drive (current_drive->drv_type&(drv_famL|drv_famV)) -#define fam0LV_drive (current_drive->drv_type&(drv_fam0|drv_famL|drv_famV)) -#define fam1L_drive (current_drive->drv_type&(drv_fam1|drv_famL)) -#define fam1V_drive (current_drive->drv_type&(drv_fam1|drv_famV)) -#define fam1LV_drive (current_drive->drv_type&(drv_fam1|drv_famL|drv_famV)) -#define fam01_drive (current_drive->drv_type&(drv_fam0|drv_fam1)) -#define fam12_drive (current_drive->drv_type&(drv_fam1|drv_fam2)) -#define fam2T_drive (current_drive->drv_type&(drv_fam2|drv_famT)) - -/* - * audio states: - */ -#define audio_completed 3 /* Forgot this one! --AJK */ -#define audio_playing 2 -#define audio_pausing 1 - -/* - * drv_pattern, drv_options: - */ -#define speed_auto 0x80 -#define speed_300 0x40 -#define speed_150 0x20 -#define audio_mono 0x04 - -/* - * values of cmd_type (0 else): - */ -#define READ_M1 0x01 /* "data mode 1": 2048 bytes per frame */ -#define READ_M2 0x02 /* "data mode 2": 12+2048+280 bytes per frame */ -#define READ_SC 0x04 /* "subchannel info": 96 bytes per frame */ -#define READ_AU 0x08 /* "audio frame": 2352 bytes per frame */ - -/* - * sense_byte: - * - * values: 00 - * 01 - * 81 - * 82 "raw audio" mode - * xx from infobuf[0] after 85 00 00 00 00 00 00 - */ - -/* audio status (bin) */ -#define aud_00 0x00 /* Audio status byte not supported or not valid */ -#define audx11 0x0b /* Audio play operation in progress */ -#define audx12 0x0c /* Audio play operation paused */ -#define audx13 0x0d /* Audio play operation successfully completed */ -#define audx14 0x0e /* Audio play operation stopped due to error */ -#define audx15 0x0f /* No current audio status to return */ -/* audio status (bcd) */ -#define aud_11 0x11 /* Audio play operation in progress */ -#define aud_12 0x12 /* Audio play operation paused */ -#define aud_13 0x13 /* Audio play operation successfully completed */ -#define aud_14 0x14 /* Audio play operation stopped due to error */ -#define aud_15 0x15 /* No current audio status to return */ - -/* - * highest allowed drive number (MINOR+1) - */ -#define NR_SBPCD 4 - -/* - * we try to never disable interrupts - seems to work - */ -#define SBPCD_DIS_IRQ 0 - -/* - * "write byte to port" - */ -#define OUT(x,y) outb(y,x) - -/*==========================================================================*/ - -#define MIXER_addr SOUND_BASE+4 /* sound card's address register */ -#define MIXER_data SOUND_BASE+5 /* sound card's data register */ -#define MIXER_CD_Volume 0x28 /* internal SB Pro register address */ - -/*==========================================================================*/ - -#define MAX_TRACKS 99 - -#define ERR_DISKCHANGE 615 - -/*==========================================================================*/ -/* - * To make conversions easier (machine dependent!) - */ -typedef union _msf -{ - u_int n; - u_char c[4]; -} MSF; - -typedef union _blk -{ - u_int n; - u_char c[4]; -} BLK; - -/*==========================================================================*/ - -/*============================================================================ -============================================================================== - -COMMAND SET of "old" drives like CR-521, CR-522 - (the CR-562 family is different): - -No. Command Code --------------------------------------------- - -Drive Commands: - 1 Seek 01 - 2 Read Data 02 - 3 Read XA-Data 03 - 4 Read Header 04 - 5 Spin Up 05 - 6 Spin Down 06 - 7 Diagnostic 07 - 8 Read UPC 08 - 9 Read ISRC 09 -10 Play Audio 0A -11 Play Audio MSF 0B -12 Play Audio Track/Index 0C - -Status Commands: -13 Read Status 81 -14 Read Error 82 -15 Read Drive Version 83 -16 Mode Select 84 -17 Mode Sense 85 -18 Set XA Parameter 86 -19 Read XA Parameter 87 -20 Read Capacity 88 -21 Read SUB_Q 89 -22 Read Disc Code 8A -23 Read Disc Information 8B -24 Read TOC 8C -25 Pause/Resume 8D -26 Read Packet 8E -27 Read Path Check 00 - - -all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first - -mnemo 7-byte command #bytes response (r0...rn) -________ ____________________ ____ - -Read Status: -status: 81. (1) one-byte command, gives the main - status byte -Read Error: -check1: 82 00 00 00 00 00 00. (6) r1: audio status - -Read Packet: -check2: 8e xx 00 00 00 00 00. (xx) gets xx bytes response, relating - to commands 01 04 05 07 08 09 - -Play Audio: -play: 0a ll-bb-aa nn-nn-nn. (0) play audio, ll-bb-aa: starting block (lba), - nn-nn-nn: #blocks -Play Audio MSF: - 0b mm-ss-ff mm-ss-ff (0) play audio from/to - -Play Audio Track/Index: - 0c ... - -Pause/Resume: -pause: 8d pr 00 00 00 00 00. (0) pause (pr=00) - resume (pr=80) audio playing - -Mode Select: - 84 00 nn-nn ??.?? 00 (0) nn-nn: 2048 or 2340 - possibly defines transfer size - -set_vol: 84 83 00 00 sw le 00. (0) sw(itch): lrxxxxxx (off=1) - le(vel): min=0, max=FF, else half - (firmware 2.11) - -Mode Sense: -get_vol: 85 03 00 00 00 00 00. (2) tell current audio volume setting - -Read Disc Information: -tocdesc: 8b 00 00 00 00 00 00. (6) read the toc descriptor ("msf-bin"-format) - -Read TOC: -tocent: 8c fl nn 00 00 00 00. (8) read toc entry #nn - (fl=0:"lba"-, =2:"msf-bin"-format) - -Read Capacity: -capacit: 88 00 00 00 00 00 00. (5) "read CD-ROM capacity" - - -Read Path Check: -ping: 00 00 00 00 00 00 00. (2) r0=AA, r1=55 - ("ping" if the drive is connected) - -Read Drive Version: -ident: 83 00 00 00 00 00 00. (12) gives "MATSHITAn.nn" - (n.nn = 2.01, 2.11., 3.00, ...) - -Seek: -seek: 01 00 ll-bb-aa 00 00. (0) -seek: 01 02 mm-ss-ff 00 00. (0) - -Read Data: -read: 02 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2048 bytes, - starting at block xx-xx-xx - fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx - -Read XA-Data: -read: 03 xx-xx-xx nn-nn fl. (?) read nn-nn blocks of 2340 bytes, - starting at block xx-xx-xx - fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx - -Read SUB_Q: - 89 fl 00 00 00 00 00. (13) r0: audio status, r4-r7: lba/msf, - fl=0: "lba", fl=2: "msf" - -Read Disc Code: - 8a 00 00 00 00 00 00. (14) possibly extended "check condition"-info - -Read Header: - 04 00 ll-bb-aa 00 00. (0) 4 bytes response with "check2" - 04 02 mm-ss-ff 00 00. (0) 4 bytes response with "check2" - -Spin Up: - 05 00 ll-bb-aa 00 00. (0) possibly implies a "seek" - -Spin Down: - 06 ... - -Diagnostic: - 07 00 ll-bb-aa 00 00. (2) 2 bytes response with "check2" - 07 02 mm-ss-ff 00 00. (2) 2 bytes response with "check2" - -Read UPC: - 08 00 ll-bb-aa 00 00. (16) - 08 02 mm-ss-ff 00 00. (16) - -Read ISRC: - 09 00 ll-bb-aa 00 00. (15) 15 bytes response with "check2" - 09 02 mm-ss-ff 00 00. (15) 15 bytes response with "check2" - -Set XA Parameter: - 86 ... - -Read XA Parameter: - 87 ... - -============================================================================== -============================================================================*/ - -/* - * commands - * - * CR-52x: CMD0_ - * CR-56x: CMD1_ - * CD200: CMD2_ - * LCS-7260: CMDL_ - * TEAC CD-55A: CMDT_ - * ECS-AT: CMDV_ - */ -#define CMD1_RESET 0x0a -#define CMD2_RESET 0x01 -#define CMDT_RESET 0xc0 - -#define CMD1_LOCK_CTL 0x0c -#define CMD2_LOCK_CTL 0x1e -#define CMDT_LOCK_CTL CMD2_LOCK_CTL -#define CMDL_LOCK_CTL 0x0e -#define CMDV_LOCK_CTL CMDL_LOCK_CTL - -#define CMD1_TRAY_CTL 0x07 -#define CMD2_TRAY_CTL 0x1b -#define CMDT_TRAY_CTL CMD2_TRAY_CTL -#define CMDL_TRAY_CTL 0x0d -#define CMDV_TRAY_CTL CMDL_TRAY_CTL - -#define CMD1_MULTISESS 0x8d -#define CMDL_MULTISESS 0x8c -#define CMDV_MULTISESS CMDL_MULTISESS - -#define CMD1_SUBCHANINF 0x11 -#define CMD2_SUBCHANINF 0x?? - -#define CMD1_ABORT 0x08 -#define CMD2_ABORT 0x08 -#define CMDT_ABORT 0x08 - -#define CMD2_x02 0x02 - -#define CMD2_SETSPEED 0xda - -#define CMD0_PATH_CHECK 0x00 -#define CMD1_PATH_CHECK 0x??? -#define CMD2_PATH_CHECK 0x??? -#define CMDT_PATH_CHECK 0x??? -#define CMDL_PATH_CHECK CMD0_PATH_CHECK -#define CMDV_PATH_CHECK CMD0_PATH_CHECK - -#define CMD0_SEEK 0x01 -#define CMD1_SEEK CMD0_SEEK -#define CMD2_SEEK 0x2b -#define CMDT_SEEK CMD2_SEEK -#define CMDL_SEEK CMD0_SEEK -#define CMDV_SEEK CMD0_SEEK - -#define CMD0_READ 0x02 -#define CMD1_READ 0x10 -#define CMD2_READ 0x28 -#define CMDT_READ CMD2_READ -#define CMDL_READ CMD0_READ -#define CMDV_READ CMD0_READ - -#define CMD0_READ_XA 0x03 -#define CMD2_READ_XA 0xd4 -#define CMD2_READ_XA2 0xd5 -#define CMDL_READ_XA CMD0_READ_XA /* really ?? */ -#define CMDV_READ_XA CMD0_READ_XA - -#define CMD0_READ_HEAD 0x04 - -#define CMD0_SPINUP 0x05 -#define CMD1_SPINUP 0x02 -#define CMD2_SPINUP CMD2_TRAY_CTL -#define CMDL_SPINUP CMD0_SPINUP -#define CMDV_SPINUP CMD0_SPINUP - -#define CMD0_SPINDOWN 0x06 /* really??? */ -#define CMD1_SPINDOWN 0x06 -#define CMD2_SPINDOWN CMD2_TRAY_CTL -#define CMDL_SPINDOWN 0x0d -#define CMDV_SPINDOWN CMD0_SPINDOWN - -#define CMD0_DIAG 0x07 - -#define CMD0_READ_UPC 0x08 -#define CMD1_READ_UPC 0x88 -#define CMD2_READ_UPC 0x??? -#define CMDL_READ_UPC CMD0_READ_UPC -#define CMDV_READ_UPC 0x8f - -#define CMD0_READ_ISRC 0x09 - -#define CMD0_PLAY 0x0a -#define CMD1_PLAY 0x??? -#define CMD2_PLAY 0x??? -#define CMDL_PLAY CMD0_PLAY -#define CMDV_PLAY CMD0_PLAY - -#define CMD0_PLAY_MSF 0x0b -#define CMD1_PLAY_MSF 0x0e -#define CMD2_PLAY_MSF 0x47 -#define CMDT_PLAY_MSF CMD2_PLAY_MSF -#define CMDL_PLAY_MSF 0x??? - -#define CMD0_PLAY_TI 0x0c -#define CMD1_PLAY_TI 0x0f - -#define CMD0_STATUS 0x81 -#define CMD1_STATUS 0x05 -#define CMD2_STATUS 0x00 -#define CMDT_STATUS CMD2_STATUS -#define CMDL_STATUS CMD0_STATUS -#define CMDV_STATUS CMD0_STATUS -#define CMD2_SEEK_LEADIN 0x00 - -#define CMD0_READ_ERR 0x82 -#define CMD1_READ_ERR CMD0_READ_ERR -#define CMD2_READ_ERR 0x03 -#define CMDT_READ_ERR CMD2_READ_ERR /* get audio status */ -#define CMDL_READ_ERR CMD0_READ_ERR -#define CMDV_READ_ERR CMD0_READ_ERR - -#define CMD0_READ_VER 0x83 -#define CMD1_READ_VER CMD0_READ_VER -#define CMD2_READ_VER 0x12 -#define CMDT_READ_VER CMD2_READ_VER /* really ?? */ -#define CMDL_READ_VER CMD0_READ_VER -#define CMDV_READ_VER CMD0_READ_VER - -#define CMD0_SETMODE 0x84 -#define CMD1_SETMODE 0x09 -#define CMD2_SETMODE 0x55 -#define CMDT_SETMODE CMD2_SETMODE -#define CMDL_SETMODE CMD0_SETMODE - -#define CMD0_GETMODE 0x85 -#define CMD1_GETMODE 0x84 -#define CMD2_GETMODE 0x5a -#define CMDT_GETMODE CMD2_GETMODE -#define CMDL_GETMODE CMD0_GETMODE - -#define CMD0_SET_XA 0x86 - -#define CMD0_GET_XA 0x87 - -#define CMD0_CAPACITY 0x88 -#define CMD1_CAPACITY 0x85 -#define CMD2_CAPACITY 0x25 -#define CMDL_CAPACITY CMD0_CAPACITY /* missing in some firmware versions */ - -#define CMD0_READSUBQ 0x89 -#define CMD1_READSUBQ 0x87 -#define CMD2_READSUBQ 0x42 -#define CMDT_READSUBQ CMD2_READSUBQ -#define CMDL_READSUBQ CMD0_READSUBQ -#define CMDV_READSUBQ CMD0_READSUBQ - -#define CMD0_DISKCODE 0x8a - -#define CMD0_DISKINFO 0x8b -#define CMD1_DISKINFO CMD0_DISKINFO -#define CMD2_DISKINFO 0x43 -#define CMDT_DISKINFO CMD2_DISKINFO -#define CMDL_DISKINFO CMD0_DISKINFO -#define CMDV_DISKINFO CMD0_DISKINFO - -#define CMD0_READTOC 0x8c -#define CMD1_READTOC CMD0_READTOC -#define CMD2_READTOC 0x??? -#define CMDL_READTOC CMD0_READTOC -#define CMDV_READTOC CMD0_READTOC - -#define CMD0_PAU_RES 0x8d -#define CMD1_PAU_RES 0x0d -#define CMD2_PAU_RES 0x4b -#define CMDT_PAUSE CMD2_PAU_RES -#define CMDL_PAU_RES CMD0_PAU_RES -#define CMDV_PAUSE CMD0_PAU_RES - -#define CMD0_PACKET 0x8e -#define CMD1_PACKET CMD0_PACKET -#define CMD2_PACKET 0x??? -#define CMDL_PACKET CMD0_PACKET -#define CMDV_PACKET 0x??? - -/*==========================================================================*/ -/*==========================================================================*/ -#endif /* _LINUX_SBPCD_H */ -/*==========================================================================*/ -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-indent-level: 8 - * c-brace-imaginary-offset: 0 - * c-brace-offset: -8 - * c-argdecl-indent: 8 - * c-label-offset: -8 - * c-continued-statement-offset: 8 - * c-continued-brace-offset: 0 - * End: - */ diff --git a/drivers/cdrom/sjcd.c b/drivers/cdrom/sjcd.c deleted file mode 100644 index 5409fca5bbf..00000000000 --- a/drivers/cdrom/sjcd.c +++ /dev/null @@ -1,1815 +0,0 @@ -/* -- sjcd.c - * - * Sanyo CD-ROM device driver implementation, Version 1.6 - * Copyright (C) 1995 Vadim V. Model - * - * model@cecmow.enet.dec.com - * vadim@rbrf.ru - * vadim@ipsun.ras.ru - * - * - * This driver is based on pre-works by Eberhard Moenkeberg (emoenke@gwdg.de); - * it was developed under use of mcd.c from Martin Harriss, with help of - * Eric van der Maarel (H.T.M.v.d.Maarel@marin.nl). - * - * It is planned to include these routines into sbpcd.c later - to make - * a "mixed use" on one cable possible for all kinds of drives which use - * the SoundBlaster/Panasonic style CDROM interface. But today, the - * ability to install directly from CDROM is more important than flexibility. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * History: - * 1.1 First public release with kernel version 1.3.7. - * Written by Vadim Model. - * 1.2 Added detection and configuration of cdrom interface - * on ISP16 soundcard. - * Allow for command line options: sjcd=<io_base>,<irq>,<dma> - * 1.3 Some minor changes to README.sjcd. - * 1.4 MSS Sound support!! Listen to a CD through the speakers. - * 1.5 Module support and bugfixes. - * Tray locking. - * 1.6 Removed ISP16 code from this driver. - * Allow only to set io base address on command line: sjcd=<io_base> - * Changes to Documentation/cdrom/sjcd - * Added cleanup after any error in the initialisation. - * 1.7 Added code to set the sector size tables to prevent the bug present in - * the previous version of this driver. Coded added by Anthony Barbachan - * from bugfix tip originally suggested by Alan Cox. - * - * November 1999 -- Make kernel-parameter implementation work with 2.3.x - * Removed init_module & cleanup_module in favor of - * module_init & module_exit. - * Torben Mathiasen <tmm@image.dk> - */ - -#define SJCD_VERSION_MAJOR 1 -#define SJCD_VERSION_MINOR 7 - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/mm.h> -#include <linux/timer.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/cdrom.h> -#include <linux/ioport.h> -#include <linux/string.h> -#include <linux/major.h> -#include <linux/init.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <linux/blkdev.h> -#include "sjcd.h" - -static int sjcd_present = 0; -static struct request_queue *sjcd_queue; - -#define MAJOR_NR SANYO_CDROM_MAJOR -#define QUEUE (sjcd_queue) -#define CURRENT elv_next_request(sjcd_queue) - -#define SJCD_BUF_SIZ 32 /* cdr-h94a has internal 64K buffer */ - -/* - * buffer for block size conversion - */ -static char sjcd_buf[2048 * SJCD_BUF_SIZ]; -static volatile int sjcd_buf_bn[SJCD_BUF_SIZ], sjcd_next_bn; -static volatile int sjcd_buf_in, sjcd_buf_out = -1; - -/* - * Status. - */ -static unsigned short sjcd_status_valid = 0; -static unsigned short sjcd_door_closed; -static unsigned short sjcd_door_was_open; -static unsigned short sjcd_media_is_available; -static unsigned short sjcd_media_is_changed; -static unsigned short sjcd_toc_uptodate = 0; -static unsigned short sjcd_command_failed; -static volatile unsigned char sjcd_completion_status = 0; -static volatile unsigned char sjcd_completion_error = 0; -static unsigned short sjcd_command_is_in_progress = 0; -static unsigned short sjcd_error_reported = 0; -static DEFINE_SPINLOCK(sjcd_lock); - -static int sjcd_open_count; - -static int sjcd_audio_status; -static struct sjcd_play_msf sjcd_playing; - -static int sjcd_base = SJCD_BASE_ADDR; - -module_param(sjcd_base, int, 0); - -static DECLARE_WAIT_QUEUE_HEAD(sjcd_waitq); - -/* - * Data transfer. - */ -static volatile unsigned short sjcd_transfer_is_active = 0; - -enum sjcd_transfer_state { - SJCD_S_IDLE = 0, - SJCD_S_START = 1, - SJCD_S_MODE = 2, - SJCD_S_READ = 3, - SJCD_S_DATA = 4, - SJCD_S_STOP = 5, - SJCD_S_STOPPING = 6 -}; -static enum sjcd_transfer_state sjcd_transfer_state = SJCD_S_IDLE; -static long sjcd_transfer_timeout = 0; -static int sjcd_read_count = 0; -static unsigned char sjcd_mode = 0; - -#define SJCD_READ_TIMEOUT 5000 - -#if defined( SJCD_GATHER_STAT ) -/* - * Statistic. - */ -static struct sjcd_stat statistic; -#endif - -/* - * Timer. - */ -static DEFINE_TIMER(sjcd_delay_timer, NULL, 0, 0); - -#define SJCD_SET_TIMER( func, tmout ) \ - ( sjcd_delay_timer.expires = jiffies+tmout, \ - sjcd_delay_timer.function = ( void * )func, \ - add_timer( &sjcd_delay_timer ) ) - -#define CLEAR_TIMER del_timer( &sjcd_delay_timer ) - -/* - * Set up device, i.e., use command line data to set - * base address. - */ -#ifndef MODULE -static int __init sjcd_setup(char *str) -{ - int ints[2]; - (void) get_options(str, ARRAY_SIZE(ints), ints); - if (ints[0] > 0) - sjcd_base = ints[1]; - - return 1; -} - -__setup("sjcd=", sjcd_setup); - -#endif - -/* - * Special converters. - */ -static unsigned char bin2bcd(int bin) -{ - int u, v; - - u = bin % 10; - v = bin / 10; - return (u | (v << 4)); -} - -static int bcd2bin(unsigned char bcd) -{ - return ((bcd >> 4) * 10 + (bcd & 0x0F)); -} - -static long msf2hsg(struct msf *mp) -{ - return (bcd2bin(mp->frame) + bcd2bin(mp->sec) * 75 - + bcd2bin(mp->min) * 4500 - 150); -} - -static void hsg2msf(long hsg, struct msf *msf) -{ - hsg += 150; - msf->min = hsg / 4500; - hsg %= 4500; - msf->sec = hsg / 75; - msf->frame = hsg % 75; - msf->min = bin2bcd(msf->min); /* convert to BCD */ - msf->sec = bin2bcd(msf->sec); - msf->frame = bin2bcd(msf->frame); -} - -/* - * Send a command to cdrom. Invalidate status. - */ -static void sjcd_send_cmd(unsigned char cmd) -{ -#if defined( SJCD_TRACE ) - printk("SJCD: send_cmd( 0x%x )\n", cmd); -#endif - outb(cmd, SJCDPORT(0)); - sjcd_command_is_in_progress = 1; - sjcd_status_valid = 0; - sjcd_command_failed = 0; -} - -/* - * Send a command with one arg to cdrom. Invalidate status. - */ -static void sjcd_send_1_cmd(unsigned char cmd, unsigned char a) -{ -#if defined( SJCD_TRACE ) - printk("SJCD: send_1_cmd( 0x%x, 0x%x )\n", cmd, a); -#endif - outb(cmd, SJCDPORT(0)); - outb(a, SJCDPORT(0)); - sjcd_command_is_in_progress = 1; - sjcd_status_valid = 0; - sjcd_command_failed = 0; -} - -/* - * Send a command with four args to cdrom. Invalidate status. - */ -static void sjcd_send_4_cmd(unsigned char cmd, unsigned char a, - unsigned char b, unsigned char c, - unsigned char d) -{ -#if defined( SJCD_TRACE ) - printk("SJCD: send_4_cmd( 0x%x )\n", cmd); -#endif - outb(cmd, SJCDPORT(0)); - outb(a, SJCDPORT(0)); - outb(b, SJCDPORT(0)); - outb(c, SJCDPORT(0)); - outb(d, SJCDPORT(0)); - sjcd_command_is_in_progress = 1; - sjcd_status_valid = 0; - sjcd_command_failed = 0; -} - -/* - * Send a play or read command to cdrom. Invalidate Status. - */ -static void sjcd_send_6_cmd(unsigned char cmd, struct sjcd_play_msf *pms) -{ -#if defined( SJCD_TRACE ) - printk("SJCD: send_long_cmd( 0x%x )\n", cmd); -#endif - outb(cmd, SJCDPORT(0)); - outb(pms->start.min, SJCDPORT(0)); - outb(pms->start.sec, SJCDPORT(0)); - outb(pms->start.frame, SJCDPORT(0)); - outb(pms->end.min, SJCDPORT(0)); - outb(pms->end.sec, SJCDPORT(0)); - outb(pms->end.frame, SJCDPORT(0)); - sjcd_command_is_in_progress = 1; - sjcd_status_valid = 0; - sjcd_command_failed = 0; -} - -/* - * Get a value from the data port. Should not block, so we use a little - * wait for a while. Returns 0 if OK. - */ -static int sjcd_load_response(void *buf, int len) -{ - unsigned char *resp = (unsigned char *) buf; - - for (; len; --len) { - int i; - for (i = 200; - i-- && !SJCD_STATUS_AVAILABLE(inb(SJCDPORT(1)));); - if (i > 0) - *resp++ = (unsigned char) inb(SJCDPORT(0)); - else - break; - } - return (len); -} - -/* - * Load and parse command completion status (drive info byte and maybe error). - * Sorry, no error classification yet. - */ -static void sjcd_load_status(void) -{ - sjcd_media_is_changed = 0; - sjcd_completion_error = 0; - sjcd_completion_status = inb(SJCDPORT(0)); - if (sjcd_completion_status & SST_DOOR_OPENED) { - sjcd_door_closed = sjcd_media_is_available = 0; - } else { - sjcd_door_closed = 1; - if (sjcd_completion_status & SST_MEDIA_CHANGED) - sjcd_media_is_available = sjcd_media_is_changed = - 1; - else if (sjcd_completion_status & 0x0F) { - /* - * OK, we seem to catch an error ... - */ - while (!SJCD_STATUS_AVAILABLE(inb(SJCDPORT(1)))); - sjcd_completion_error = inb(SJCDPORT(0)); - if ((sjcd_completion_status & 0x08) && - (sjcd_completion_error & 0x40)) - sjcd_media_is_available = 0; - else - sjcd_command_failed = 1; - } else - sjcd_media_is_available = 1; - } - /* - * Ok, status loaded successfully. - */ - sjcd_status_valid = 1, sjcd_error_reported = 0; - sjcd_command_is_in_progress = 0; - - /* - * If the disk is changed, the TOC is not valid. - */ - if (sjcd_media_is_changed) - sjcd_toc_uptodate = 0; -#if defined( SJCD_TRACE ) - printk("SJCD: status %02x.%02x loaded.\n", - (int) sjcd_completion_status, (int) sjcd_completion_error); -#endif -} - -/* - * Read status from cdrom. Check to see if the status is available. - */ -static int sjcd_check_status(void) -{ - /* - * Try to load the response from cdrom into buffer. - */ - if (SJCD_STATUS_AVAILABLE(inb(SJCDPORT(1)))) { - sjcd_load_status(); - return (1); - } else { - /* - * No status is available. - */ - return (0); - } -} - -/* - * This is just timeout counter, and nothing more. Surprised ? :-) - */ -static volatile long sjcd_status_timeout; - -/* - * We need about 10 seconds to wait. The longest command takes about 5 seconds - * to probe the disk (usually after tray closed or drive reset). Other values - * should be thought of for other commands. - */ -#define SJCD_WAIT_FOR_STATUS_TIMEOUT 1000 - -static void sjcd_status_timer(void) -{ - if (sjcd_check_status()) { - /* - * The command completed and status is loaded, stop waiting. - */ - wake_up(&sjcd_waitq); - } else if (--sjcd_status_timeout <= 0) { - /* - * We are timed out. - */ - wake_up(&sjcd_waitq); - } else { - /* - * We have still some time to wait. Try again. - */ - SJCD_SET_TIMER(sjcd_status_timer, 1); - } -} - -/* - * Wait for status for 10 sec approx. Returns non-positive when timed out. - * Should not be used while reading data CDs. - */ -static int sjcd_wait_for_status(void) -{ - sjcd_status_timeout = SJCD_WAIT_FOR_STATUS_TIMEOUT; - SJCD_SET_TIMER(sjcd_status_timer, 1); - sleep_on(&sjcd_waitq); -#if defined( SJCD_DIAGNOSTIC ) || defined ( SJCD_TRACE ) - if (sjcd_status_timeout <= 0) - printk("SJCD: Error Wait For Status.\n"); -#endif - return (sjcd_status_timeout); -} - -static int sjcd_receive_status(void) -{ - int i; -#if defined( SJCD_TRACE ) - printk("SJCD: receive_status\n"); -#endif - /* - * Wait a bit for status available. - */ - for (i = 200; i-- && (sjcd_check_status() == 0);); - if (i < 0) { -#if defined( SJCD_TRACE ) - printk("SJCD: long wait for status\n"); -#endif - if (sjcd_wait_for_status() <= 0) - printk("SJCD: Timeout when read status.\n"); - else - i = 0; - } - return (i); -} - -/* - * Load the status. Issue get status command and wait for status available. - */ -static void sjcd_get_status(void) -{ -#if defined( SJCD_TRACE ) - printk("SJCD: get_status\n"); -#endif - sjcd_send_cmd(SCMD_GET_STATUS); - sjcd_receive_status(); -} - -/* - * Check the drive if the disk is changed. Should be revised. - */ -static int sjcd_disk_change(struct gendisk *disk) -{ -#if 0 - printk("SJCD: sjcd_disk_change(%s)\n", disk->disk_name); -#endif - if (!sjcd_command_is_in_progress) - sjcd_get_status(); - return (sjcd_status_valid ? sjcd_media_is_changed : 0); -} - -/* - * Read the table of contents (TOC) and TOC header if necessary. - * We assume that the drive contains no more than 99 toc entries. - */ -static struct sjcd_hw_disk_info sjcd_table_of_contents[SJCD_MAX_TRACKS]; -static unsigned char sjcd_first_track_no, sjcd_last_track_no; -#define sjcd_disk_length sjcd_table_of_contents[0].un.track_msf - -static int sjcd_update_toc(void) -{ - struct sjcd_hw_disk_info info; - int i; -#if defined( SJCD_TRACE ) - printk("SJCD: update toc:\n"); -#endif - /* - * check to see if we need to do anything - */ - if (sjcd_toc_uptodate) - return (0); - - /* - * Get the TOC start information. - */ - sjcd_send_1_cmd(SCMD_GET_DISK_INFO, SCMD_GET_1_TRACK); - sjcd_receive_status(); - - if (!sjcd_status_valid) { - printk("SJCD: cannot load status.\n"); - return (-1); - } - - if (!sjcd_media_is_available) { - printk("SJCD: no disk in drive\n"); - return (-1); - } - - if (!sjcd_command_failed) { - if (sjcd_load_response(&info, sizeof(info)) != 0) { - printk - ("SJCD: cannot load response about TOC start.\n"); - return (-1); - } - sjcd_first_track_no = bcd2bin(info.un.track_no); - } else { - printk("SJCD: get first failed\n"); - return (-1); - } -#if defined( SJCD_TRACE ) - printk("SJCD: TOC start 0x%02x ", sjcd_first_track_no); -#endif - /* - * Get the TOC finish information. - */ - sjcd_send_1_cmd(SCMD_GET_DISK_INFO, SCMD_GET_L_TRACK); - sjcd_receive_status(); - - if (!sjcd_status_valid) { - printk("SJCD: cannot load status.\n"); - return (-1); - } - - if (!sjcd_media_is_available) { - printk("SJCD: no disk in drive\n"); - return (-1); - } - - if (!sjcd_command_failed) { - if (sjcd_load_response(&info, sizeof(info)) != 0) { - printk - ("SJCD: cannot load response about TOC finish.\n"); - return (-1); - } - sjcd_last_track_no = bcd2bin(info.un.track_no); - } else { - printk("SJCD: get last failed\n"); - return (-1); - } -#if defined( SJCD_TRACE ) - printk("SJCD: TOC finish 0x%02x ", sjcd_last_track_no); -#endif - for (i = sjcd_first_track_no; i <= sjcd_last_track_no; i++) { - /* - * Get the first track information. - */ - sjcd_send_1_cmd(SCMD_GET_DISK_INFO, bin2bcd(i)); - sjcd_receive_status(); - - if (!sjcd_status_valid) { - printk("SJCD: cannot load status.\n"); - return (-1); - } - - if (!sjcd_media_is_available) { - printk("SJCD: no disk in drive\n"); - return (-1); - } - - if (!sjcd_command_failed) { - if (sjcd_load_response(&sjcd_table_of_contents[i], - sizeof(struct - sjcd_hw_disk_info)) - != 0) { - printk - ("SJCD: cannot load info for %d track\n", - i); - return (-1); - } - } else { - printk("SJCD: get info %d failed\n", i); - return (-1); - } - } - - /* - * Get the disk length info. - */ - sjcd_send_1_cmd(SCMD_GET_DISK_INFO, SCMD_GET_D_SIZE); - sjcd_receive_status(); - - if (!sjcd_status_valid) { - printk("SJCD: cannot load status.\n"); - return (-1); - } - - if (!sjcd_media_is_available) { - printk("SJCD: no disk in drive\n"); - return (-1); - } - - if (!sjcd_command_failed) { - if (sjcd_load_response(&info, sizeof(info)) != 0) { - printk - ("SJCD: cannot load response about disk size.\n"); - return (-1); - } - sjcd_disk_length.min = info.un.track_msf.min; - sjcd_disk_length.sec = info.un.track_msf.sec; - sjcd_disk_length.frame = info.un.track_msf.frame; - } else { - printk("SJCD: get size failed\n"); - return (1); - } -#if defined( SJCD_TRACE ) - printk("SJCD: (%02x:%02x.%02x)\n", sjcd_disk_length.min, - sjcd_disk_length.sec, sjcd_disk_length.frame); -#endif - return (0); -} - -/* - * Load subchannel information. - */ -static int sjcd_get_q_info(struct sjcd_hw_qinfo *qp) -{ - int s; -#if defined( SJCD_TRACE ) - printk("SJCD: load sub q\n"); -#endif - sjcd_send_cmd(SCMD_GET_QINFO); - s = sjcd_receive_status(); - if (s < 0 || sjcd_command_failed || !sjcd_status_valid) { - sjcd_send_cmd(0xF2); - s = sjcd_receive_status(); - if (s < 0 || sjcd_command_failed || !sjcd_status_valid) - return (-1); - sjcd_send_cmd(SCMD_GET_QINFO); - s = sjcd_receive_status(); - if (s < 0 || sjcd_command_failed || !sjcd_status_valid) - return (-1); - } - if (sjcd_media_is_available) - if (sjcd_load_response(qp, sizeof(*qp)) == 0) - return (0); - return (-1); -} - -/* - * Start playing from the specified position. - */ -static int sjcd_play(struct sjcd_play_msf *mp) -{ - struct sjcd_play_msf msf; - - /* - * Turn the device to play mode. - */ - sjcd_send_1_cmd(SCMD_SET_MODE, SCMD_MODE_PLAY); - if (sjcd_receive_status() < 0) - return (-1); - - /* - * Seek to the starting point. - */ - msf.start = mp->start; - msf.end.min = msf.end.sec = msf.end.frame = 0x00; - sjcd_send_6_cmd(SCMD_SEEK, &msf); - if (sjcd_receive_status() < 0) - return (-1); - - /* - * Start playing. - */ - sjcd_send_6_cmd(SCMD_PLAY, mp); - return (sjcd_receive_status()); -} - -/* - * Tray control functions. - */ -static int sjcd_tray_close(void) -{ -#if defined( SJCD_TRACE ) - printk("SJCD: tray_close\n"); -#endif - sjcd_send_cmd(SCMD_CLOSE_TRAY); - return (sjcd_receive_status()); -} - -static int sjcd_tray_lock(void) -{ -#if defined( SJCD_TRACE ) - printk("SJCD: tray_lock\n"); -#endif - sjcd_send_cmd(SCMD_LOCK_TRAY); - return (sjcd_receive_status()); -} - -static int sjcd_tray_unlock(void) -{ -#if defined( SJCD_TRACE ) - printk("SJCD: tray_unlock\n"); -#endif - sjcd_send_cmd(SCMD_UNLOCK_TRAY); - return (sjcd_receive_status()); -} - -static int sjcd_tray_open(void) -{ -#if defined( SJCD_TRACE ) - printk("SJCD: tray_open\n"); -#endif - sjcd_send_cmd(SCMD_EJECT_TRAY); - return (sjcd_receive_status()); -} - -/* - * Do some user commands. - */ -static int sjcd_ioctl(struct inode *ip, struct file *fp, - unsigned int cmd, unsigned long arg) -{ - void __user *argp = (void __user *)arg; -#if defined( SJCD_TRACE ) - printk("SJCD:ioctl\n"); -#endif - - sjcd_get_status(); - if (!sjcd_status_valid) - return (-EIO); - if (sjcd_update_toc() < 0) - return (-EIO); - - switch (cmd) { - case CDROMSTART:{ -#if defined( SJCD_TRACE ) - printk("SJCD: ioctl: start\n"); -#endif - return (0); - } - - case CDROMSTOP:{ -#if defined( SJCD_TRACE ) - printk("SJCD: ioctl: stop\n"); -#endif - sjcd_send_cmd(SCMD_PAUSE); - (void) sjcd_receive_status(); - sjcd_audio_status = CDROM_AUDIO_NO_STATUS; - return (0); - } - - case CDROMPAUSE:{ - struct sjcd_hw_qinfo q_info; -#if defined( SJCD_TRACE ) - printk("SJCD: ioctl: pause\n"); -#endif - if (sjcd_audio_status == CDROM_AUDIO_PLAY) { - sjcd_send_cmd(SCMD_PAUSE); - (void) sjcd_receive_status(); - if (sjcd_get_q_info(&q_info) < 0) { - sjcd_audio_status = - CDROM_AUDIO_NO_STATUS; - } else { - sjcd_audio_status = - CDROM_AUDIO_PAUSED; - sjcd_playing.start = q_info.abs; - } - return (0); - } else - return (-EINVAL); - } - - case CDROMRESUME:{ -#if defined( SJCD_TRACE ) - printk("SJCD: ioctl: resume\n"); -#endif - if (sjcd_audio_status == CDROM_AUDIO_PAUSED) { - /* - * continue play starting at saved location - */ - if (sjcd_play(&sjcd_playing) < 0) { - sjcd_audio_status = - CDROM_AUDIO_ERROR; - return (-EIO); - } else { - sjcd_audio_status = - CDROM_AUDIO_PLAY; - return (0); - } - } else - return (-EINVAL); - } - - case CDROMPLAYTRKIND:{ - struct cdrom_ti ti; - int s = -EFAULT; -#if defined( SJCD_TRACE ) - printk("SJCD: ioctl: playtrkind\n"); -#endif - if (!copy_from_user(&ti, argp, sizeof(ti))) { - s = 0; - if (ti.cdti_trk0 < sjcd_first_track_no) - return (-EINVAL); - if (ti.cdti_trk1 > sjcd_last_track_no) - ti.cdti_trk1 = sjcd_last_track_no; - if (ti.cdti_trk0 > ti.cdti_trk1) - return (-EINVAL); - - sjcd_playing.start = - sjcd_table_of_contents[ti.cdti_trk0]. - un.track_msf; - sjcd_playing.end = - (ti.cdti_trk1 < - sjcd_last_track_no) ? - sjcd_table_of_contents[ti.cdti_trk1 + - 1].un. - track_msf : sjcd_table_of_contents[0]. - un.track_msf; - - if (sjcd_play(&sjcd_playing) < 0) { - sjcd_audio_status = - CDROM_AUDIO_ERROR; - return (-EIO); - } else - sjcd_audio_status = - CDROM_AUDIO_PLAY; - } - return (s); - } - - case CDROMPLAYMSF:{ - struct cdrom_msf sjcd_msf; - int s; -#if defined( SJCD_TRACE ) - printk("SJCD: ioctl: playmsf\n"); -#endif - if ((s = - access_ok(VERIFY_READ, argp, sizeof(sjcd_msf)) - ? 0 : -EFAULT) == 0) { - if (sjcd_audio_status == CDROM_AUDIO_PLAY) { - sjcd_send_cmd(SCMD_PAUSE); - (void) sjcd_receive_status(); - sjcd_audio_status = - CDROM_AUDIO_NO_STATUS; - } - - if (copy_from_user(&sjcd_msf, argp, - sizeof(sjcd_msf))) - return (-EFAULT); - - sjcd_playing.start.min = - bin2bcd(sjcd_msf.cdmsf_min0); - sjcd_playing.start.sec = - bin2bcd(sjcd_msf.cdmsf_sec0); - sjcd_playing.start.frame = - bin2bcd(sjcd_msf.cdmsf_frame0); - sjcd_playing.end.min = - bin2bcd(sjcd_msf.cdmsf_min1); - sjcd_playing.end.sec = - bin2bcd(sjcd_msf.cdmsf_sec1); - sjcd_playing.end.frame = - bin2bcd(sjcd_msf.cdmsf_frame1); - - if (sjcd_play(&sjcd_playing) < 0) { - sjcd_audio_status = - CDROM_AUDIO_ERROR; - return (-EIO); - } else - sjcd_audio_status = - CDROM_AUDIO_PLAY; - } - return (s); - } - - case CDROMREADTOCHDR:{ - struct cdrom_tochdr toc_header; -#if defined (SJCD_TRACE ) - printk("SJCD: ioctl: readtocheader\n"); -#endif - toc_header.cdth_trk0 = sjcd_first_track_no; - toc_header.cdth_trk1 = sjcd_last_track_no; - if (copy_to_user(argp, &toc_header, - sizeof(toc_header))) - return -EFAULT; - return 0; - } - - case CDROMREADTOCENTRY:{ - struct cdrom_tocentry toc_entry; - int s; -#if defined( SJCD_TRACE ) - printk("SJCD: ioctl: readtocentry\n"); -#endif - if ((s = - access_ok(VERIFY_WRITE, argp, sizeof(toc_entry)) - ? 0 : -EFAULT) == 0) { - struct sjcd_hw_disk_info *tp; - - if (copy_from_user(&toc_entry, argp, - sizeof(toc_entry))) - return (-EFAULT); - if (toc_entry.cdte_track == CDROM_LEADOUT) - tp = &sjcd_table_of_contents[0]; - else if (toc_entry.cdte_track < - sjcd_first_track_no) - return (-EINVAL); - else if (toc_entry.cdte_track > - sjcd_last_track_no) - return (-EINVAL); - else - tp = &sjcd_table_of_contents - [toc_entry.cdte_track]; - - toc_entry.cdte_adr = - tp->track_control & 0x0F; - toc_entry.cdte_ctrl = - tp->track_control >> 4; - - switch (toc_entry.cdte_format) { - case CDROM_LBA: - toc_entry.cdte_addr.lba = - msf2hsg(&(tp->un.track_msf)); - break; - case CDROM_MSF: - toc_entry.cdte_addr.msf.minute = - bcd2bin(tp->un.track_msf.min); - toc_entry.cdte_addr.msf.second = - bcd2bin(tp->un.track_msf.sec); - toc_entry.cdte_addr.msf.frame = - bcd2bin(tp->un.track_msf. - frame); - break; - default: - return (-EINVAL); - } - if (copy_to_user(argp, &toc_entry, - sizeof(toc_entry))) - s = -EFAULT; - } - return (s); - } - - case CDROMSUBCHNL:{ - struct cdrom_subchnl subchnl; - int s; -#if defined( SJCD_TRACE ) - printk("SJCD: ioctl: subchnl\n"); -#endif - if ((s = - access_ok(VERIFY_WRITE, argp, sizeof(subchnl)) - ? 0 : -EFAULT) == 0) { - struct sjcd_hw_qinfo q_info; - - if (copy_from_user(&subchnl, argp, - sizeof(subchnl))) - return (-EFAULT); - - if (sjcd_get_q_info(&q_info) < 0) - return (-EIO); - - subchnl.cdsc_audiostatus = - sjcd_audio_status; - subchnl.cdsc_adr = - q_info.track_control & 0x0F; - subchnl.cdsc_ctrl = - q_info.track_control >> 4; - subchnl.cdsc_trk = - bcd2bin(q_info.track_no); - subchnl.cdsc_ind = bcd2bin(q_info.x); - - switch (subchnl.cdsc_format) { - case CDROM_LBA: - subchnl.cdsc_absaddr.lba = - msf2hsg(&(q_info.abs)); - subchnl.cdsc_reladdr.lba = - msf2hsg(&(q_info.rel)); - break; - case CDROM_MSF: - subchnl.cdsc_absaddr.msf.minute = - bcd2bin(q_info.abs.min); - subchnl.cdsc_absaddr.msf.second = - bcd2bin(q_info.abs.sec); - subchnl.cdsc_absaddr.msf.frame = - bcd2bin(q_info.abs.frame); - subchnl.cdsc_reladdr.msf.minute = - bcd2bin(q_info.rel.min); - subchnl.cdsc_reladdr.msf.second = - bcd2bin(q_info.rel.sec); - subchnl.cdsc_reladdr.msf.frame = - bcd2bin(q_info.rel.frame); - break; - default: - return (-EINVAL); - } - if (copy_to_user(argp, &subchnl, - sizeof(subchnl))) - s = -EFAULT; - } - return (s); - } - - case CDROMVOLCTRL:{ - struct cdrom_volctrl vol_ctrl; - int s; -#if defined( SJCD_TRACE ) - printk("SJCD: ioctl: volctrl\n"); -#endif - if ((s = - access_ok(VERIFY_READ, argp, sizeof(vol_ctrl)) - ? 0 : -EFAULT) == 0) { - unsigned char dummy[4]; - - if (copy_from_user(&vol_ctrl, argp, - sizeof(vol_ctrl))) - return (-EFAULT); - sjcd_send_4_cmd(SCMD_SET_VOLUME, - vol_ctrl.channel0, 0xFF, - vol_ctrl.channel1, 0xFF); - if (sjcd_receive_status() < 0) - return (-EIO); - (void) sjcd_load_response(dummy, 4); - } - return (s); - } - - case CDROMEJECT:{ -#if defined( SJCD_TRACE ) - printk("SJCD: ioctl: eject\n"); -#endif - if (!sjcd_command_is_in_progress) { - sjcd_tray_unlock(); - sjcd_send_cmd(SCMD_EJECT_TRAY); - (void) sjcd_receive_status(); - } - return (0); - } - -#if defined( SJCD_GATHER_STAT ) - case 0xABCD:{ -#if defined( SJCD_TRACE ) - printk("SJCD: ioctl: statistic\n"); -#endif - if (copy_to_user(argp, &statistic, sizeof(statistic))) - return -EFAULT; - return 0; - } -#endif - - default: - return (-EINVAL); - } -} - -/* - * Invalidate internal buffers of the driver. - */ -static void sjcd_invalidate_buffers(void) -{ - int i; - for (i = 0; i < SJCD_BUF_SIZ; sjcd_buf_bn[i++] = -1); - sjcd_buf_out = -1; -} - -/* - * Take care of the different block sizes between cdrom and Linux. - * When Linux gets variable block sizes this will probably go away. - */ - -static int current_valid(void) -{ - return CURRENT && - CURRENT->cmd == READ && - CURRENT->sector != -1; -} - -static void sjcd_transfer(void) -{ -#if defined( SJCD_TRACE ) - printk("SJCD: transfer:\n"); -#endif - if (current_valid()) { - while (CURRENT->nr_sectors) { - int i, bn = CURRENT->sector / 4; - for (i = 0; - i < SJCD_BUF_SIZ && sjcd_buf_bn[i] != bn; - i++); - if (i < SJCD_BUF_SIZ) { - int offs = - (i * 4 + (CURRENT->sector & 3)) * 512; - int nr_sectors = 4 - (CURRENT->sector & 3); - if (sjcd_buf_out != i) { - sjcd_buf_out = i; - if (sjcd_buf_bn[i] != bn) { - sjcd_buf_out = -1; - continue; - } - } - if (nr_sectors > CURRENT->nr_sectors) - nr_sectors = CURRENT->nr_sectors; -#if defined( SJCD_TRACE ) - printk("SJCD: copy out\n"); -#endif - memcpy(CURRENT->buffer, sjcd_buf + offs, - nr_sectors * 512); - CURRENT->nr_sectors -= nr_sectors; - CURRENT->sector += nr_sectors; - CURRENT->buffer += nr_sectors * 512; - } else { - sjcd_buf_out = -1; - break; - } - } - } -#if defined( SJCD_TRACE ) - printk("SJCD: transfer: done\n"); -#endif -} - -static void sjcd_poll(void) -{ -#if defined( SJCD_GATHER_STAT ) - /* - * Update total number of ticks. - */ - statistic.ticks++; - statistic.tticks[sjcd_transfer_state]++; -#endif - - ReSwitch:switch (sjcd_transfer_state) { - - case SJCD_S_IDLE:{ -#if defined( SJCD_GATHER_STAT ) - statistic.idle_ticks++; -#endif -#if defined( SJCD_TRACE ) - printk("SJCD_S_IDLE\n"); -#endif - return; - } - - case SJCD_S_START:{ -#if defined( SJCD_GATHER_STAT ) - statistic.start_ticks++; -#endif - sjcd_send_cmd(SCMD_GET_STATUS); - sjcd_transfer_state = - sjcd_mode == - SCMD_MODE_COOKED ? SJCD_S_READ : SJCD_S_MODE; - sjcd_transfer_timeout = 500; -#if defined( SJCD_TRACE ) - printk("SJCD_S_START: goto SJCD_S_%s mode\n", - sjcd_transfer_state == - SJCD_S_READ ? "READ" : "MODE"); -#endif - break; - } - - case SJCD_S_MODE:{ - if (sjcd_check_status()) { - /* - * Previous command is completed. - */ - if (!sjcd_status_valid - || sjcd_command_failed) { -#if defined( SJCD_TRACE ) - printk - ("SJCD_S_MODE: pre-cmd failed: goto to SJCD_S_STOP mode\n"); -#endif - sjcd_transfer_state = SJCD_S_STOP; - goto ReSwitch; - } - - sjcd_mode = 0; /* unknown mode; should not be valid when failed */ - sjcd_send_1_cmd(SCMD_SET_MODE, - SCMD_MODE_COOKED); - sjcd_transfer_state = SJCD_S_READ; - sjcd_transfer_timeout = 1000; -#if defined( SJCD_TRACE ) - printk - ("SJCD_S_MODE: goto SJCD_S_READ mode\n"); -#endif - } -#if defined( SJCD_GATHER_STAT ) - else - statistic.mode_ticks++; -#endif - break; - } - - case SJCD_S_READ:{ - if (sjcd_status_valid ? 1 : sjcd_check_status()) { - /* - * Previous command is completed. - */ - if (!sjcd_status_valid - || sjcd_command_failed) { -#if defined( SJCD_TRACE ) - printk - ("SJCD_S_READ: pre-cmd failed: goto to SJCD_S_STOP mode\n"); -#endif - sjcd_transfer_state = SJCD_S_STOP; - goto ReSwitch; - } - if (!sjcd_media_is_available) { -#if defined( SJCD_TRACE ) - printk - ("SJCD_S_READ: no disk: goto to SJCD_S_STOP mode\n"); -#endif - sjcd_transfer_state = SJCD_S_STOP; - goto ReSwitch; - } - if (sjcd_mode != SCMD_MODE_COOKED) { - /* - * We seem to come from set mode. So discard one byte of result. - */ - if (sjcd_load_response - (&sjcd_mode, 1) != 0) { -#if defined( SJCD_TRACE ) - printk - ("SJCD_S_READ: load failed: goto to SJCD_S_STOP mode\n"); -#endif - sjcd_transfer_state = - SJCD_S_STOP; - goto ReSwitch; - } - if (sjcd_mode != SCMD_MODE_COOKED) { -#if defined( SJCD_TRACE ) - printk - ("SJCD_S_READ: mode failed: goto to SJCD_S_STOP mode\n"); -#endif - sjcd_transfer_state = - SJCD_S_STOP; - goto ReSwitch; - } - } - - if (current_valid()) { - struct sjcd_play_msf msf; - - sjcd_next_bn = CURRENT->sector / 4; - hsg2msf(sjcd_next_bn, &msf.start); - msf.end.min = 0; - msf.end.sec = 0; - msf.end.frame = sjcd_read_count = - SJCD_BUF_SIZ; -#if defined( SJCD_TRACE ) - printk - ("SJCD: ---reading msf-address %x:%x:%x %x:%x:%x\n", - msf.start.min, msf.start.sec, - msf.start.frame, msf.end.min, - msf.end.sec, msf.end.frame); - printk - ("sjcd_next_bn:%x buf_in:%x buf_out:%x buf_bn:%x\n", - sjcd_next_bn, sjcd_buf_in, - sjcd_buf_out, - sjcd_buf_bn[sjcd_buf_in]); -#endif - sjcd_send_6_cmd(SCMD_DATA_READ, - &msf); - sjcd_transfer_state = SJCD_S_DATA; - sjcd_transfer_timeout = 500; -#if defined( SJCD_TRACE ) - printk - ("SJCD_S_READ: go to SJCD_S_DATA mode\n"); -#endif - } else { -#if defined( SJCD_TRACE ) - printk - ("SJCD_S_READ: nothing to read: go to SJCD_S_STOP mode\n"); -#endif - sjcd_transfer_state = SJCD_S_STOP; - goto ReSwitch; - } - } -#if defined( SJCD_GATHER_STAT ) - else - statistic.read_ticks++; -#endif - break; - } - - case SJCD_S_DATA:{ - unsigned char stat; - - sjcd_s_data:stat = - inb(SJCDPORT - (1)); -#if defined( SJCD_TRACE ) - printk("SJCD_S_DATA: status = 0x%02x\n", stat); -#endif - if (SJCD_STATUS_AVAILABLE(stat)) { - /* - * No data is waiting for us in the drive buffer. Status of operation - * completion is available. Read and parse it. - */ - sjcd_load_status(); - - if (!sjcd_status_valid - || sjcd_command_failed) { -#if defined( SJCD_TRACE ) - printk - ("SJCD: read block %d failed, maybe audio disk? Giving up\n", - sjcd_next_bn); -#endif - if (current_valid()) - end_request(CURRENT, 0); -#if defined( SJCD_TRACE ) - printk - ("SJCD_S_DATA: pre-cmd failed: go to SJCD_S_STOP mode\n"); -#endif - sjcd_transfer_state = SJCD_S_STOP; - goto ReSwitch; - } - - if (!sjcd_media_is_available) { - printk - ("SJCD_S_DATA: no disk: go to SJCD_S_STOP mode\n"); - sjcd_transfer_state = SJCD_S_STOP; - goto ReSwitch; - } - - sjcd_transfer_state = SJCD_S_READ; - goto ReSwitch; - } else if (SJCD_DATA_AVAILABLE(stat)) { - /* - * One frame is read into device buffer. We must copy it to our memory. - * Otherwise cdrom hangs up. Check to see if we have something to copy - * to. - */ - if (!current_valid() - && sjcd_buf_in == sjcd_buf_out) { -#if defined( SJCD_TRACE ) - printk - ("SJCD_S_DATA: nothing to read: go to SJCD_S_STOP mode\n"); - printk - (" ... all the date would be discarded\n"); -#endif - sjcd_transfer_state = SJCD_S_STOP; - goto ReSwitch; - } - - /* - * Everything seems to be OK. Just read the frame and recalculate - * indices. - */ - sjcd_buf_bn[sjcd_buf_in] = -1; /* ??? */ - insb(SJCDPORT(2), - sjcd_buf + 2048 * sjcd_buf_in, 2048); -#if defined( SJCD_TRACE ) - printk - ("SJCD_S_DATA: next_bn=%d, buf_in=%d, buf_out=%d, buf_bn=%d\n", - sjcd_next_bn, sjcd_buf_in, - sjcd_buf_out, - sjcd_buf_bn[sjcd_buf_in]); -#endif - sjcd_buf_bn[sjcd_buf_in] = sjcd_next_bn++; - if (sjcd_buf_out == -1) - sjcd_buf_out = sjcd_buf_in; - if (++sjcd_buf_in == SJCD_BUF_SIZ) - sjcd_buf_in = 0; - - /* - * Only one frame is ready at time. So we should turn over to wait for - * another frame. If we need that, of course. - */ - if (--sjcd_read_count == 0) { - /* - * OK, request seems to be precessed. Continue transferring... - */ - if (!sjcd_transfer_is_active) { - while (current_valid()) { - /* - * Continue transferring. - */ - sjcd_transfer(); - if (CURRENT-> - nr_sectors == - 0) - end_request - (CURRENT, 1); - else - break; - } - } - if (current_valid() && - (CURRENT->sector / 4 < - sjcd_next_bn - || CURRENT->sector / 4 > - sjcd_next_bn + - SJCD_BUF_SIZ)) { -#if defined( SJCD_TRACE ) - printk - ("SJCD_S_DATA: can't read: go to SJCD_S_STOP mode\n"); -#endif - sjcd_transfer_state = - SJCD_S_STOP; - goto ReSwitch; - } - } - /* - * Now we should turn around rather than wait for while. - */ - goto sjcd_s_data; - } -#if defined( SJCD_GATHER_STAT ) - else - statistic.data_ticks++; -#endif - break; - } - - case SJCD_S_STOP:{ - sjcd_read_count = 0; - sjcd_send_cmd(SCMD_STOP); - sjcd_transfer_state = SJCD_S_STOPPING; - sjcd_transfer_timeout = 500; -#if defined( SJCD_GATHER_STAT ) - statistic.stop_ticks++; -#endif - break; - } - - case SJCD_S_STOPPING:{ - unsigned char stat; - - stat = inb(SJCDPORT(1)); -#if defined( SJCD_TRACE ) - printk("SJCD_S_STOP: status = 0x%02x\n", stat); -#endif - if (SJCD_DATA_AVAILABLE(stat)) { - int i; -#if defined( SJCD_TRACE ) - printk("SJCD_S_STOP: discard data\n"); -#endif - /* - * Discard all the data from the pipe. Foolish method. - */ - for (i = 2048; i--; - (void) inb(SJCDPORT(2))); - sjcd_transfer_timeout = 500; - } else if (SJCD_STATUS_AVAILABLE(stat)) { - sjcd_load_status(); - if (sjcd_status_valid - && sjcd_media_is_changed) { - sjcd_toc_uptodate = 0; - sjcd_invalidate_buffers(); - } - if (current_valid()) { - if (sjcd_status_valid) - sjcd_transfer_state = - SJCD_S_READ; - else - sjcd_transfer_state = - SJCD_S_START; - } else - sjcd_transfer_state = SJCD_S_IDLE; - goto ReSwitch; - } -#if defined( SJCD_GATHER_STAT ) - else - statistic.stopping_ticks++; -#endif - break; - } - - default: - printk("SJCD: poll: invalid state %d\n", - sjcd_transfer_state); - return; - } - - if (--sjcd_transfer_timeout == 0) { - printk("SJCD: timeout in state %d\n", sjcd_transfer_state); - while (current_valid()) - end_request(CURRENT, 0); - sjcd_send_cmd(SCMD_STOP); - sjcd_transfer_state = SJCD_S_IDLE; - goto ReSwitch; - } - - /* - * Get back in some time. 1 should be replaced with count variable to - * avoid unnecessary testings. - */ - SJCD_SET_TIMER(sjcd_poll, 1); -} - -static void do_sjcd_request(request_queue_t * q) -{ -#if defined( SJCD_TRACE ) - printk("SJCD: do_sjcd_request(%ld+%ld)\n", - CURRENT->sector, CURRENT->nr_sectors); -#endif - sjcd_transfer_is_active = 1; - while (current_valid()) { - sjcd_transfer(); - if (CURRENT->nr_sectors == 0) - end_request(CURRENT, 1); - else { - sjcd_buf_out = -1; /* Want to read a block not in buffer */ - if (sjcd_transfer_state == SJCD_S_IDLE) { - if (!sjcd_toc_uptodate) { - if (sjcd_update_toc() < 0) { - printk - ("SJCD: transfer: discard\n"); - while (current_valid()) - end_request(CURRENT, 0); - break; - } - } - sjcd_transfer_state = SJCD_S_START; - SJCD_SET_TIMER(sjcd_poll, HZ / 100); - } - break; - } - } - sjcd_transfer_is_active = 0; -#if defined( SJCD_TRACE ) - printk - ("sjcd_next_bn:%x sjcd_buf_in:%x sjcd_buf_out:%x sjcd_buf_bn:%x\n", - sjcd_next_bn, sjcd_buf_in, sjcd_buf_out, - sjcd_buf_bn[sjcd_buf_in]); - printk("do_sjcd_request ends\n"); -#endif -} - -/* - * Open the device special file. Check disk is in. - */ -static int sjcd_open(struct inode *ip, struct file *fp) -{ - /* - * Check the presence of device. - */ - if (!sjcd_present) - return (-ENXIO); - - /* - * Only read operations are allowed. Really? (:-) - */ - if (fp->f_mode & 2) - return (-EROFS); - - if (sjcd_open_count == 0) { - int s, sjcd_open_tries; -/* We don't know that, do we? */ -/* - sjcd_audio_status = CDROM_AUDIO_NO_STATUS; -*/ - sjcd_mode = 0; - sjcd_door_was_open = 0; - sjcd_transfer_state = SJCD_S_IDLE; - sjcd_invalidate_buffers(); - sjcd_status_valid = 0; - - /* - * Strict status checking. - */ - for (sjcd_open_tries = 4; --sjcd_open_tries;) { - if (!sjcd_status_valid) - sjcd_get_status(); - if (!sjcd_status_valid) { -#if defined( SJCD_DIAGNOSTIC ) - printk - ("SJCD: open: timed out when check status.\n"); -#endif - goto err_out; - } else if (!sjcd_media_is_available) { -#if defined( SJCD_DIAGNOSTIC ) - printk("SJCD: open: no disk in drive\n"); -#endif - if (!sjcd_door_closed) { - sjcd_door_was_open = 1; -#if defined( SJCD_TRACE ) - printk - ("SJCD: open: close the tray\n"); -#endif - s = sjcd_tray_close(); - if (s < 0 || !sjcd_status_valid - || sjcd_command_failed) { -#if defined( SJCD_DIAGNOSTIC ) - printk - ("SJCD: open: tray close attempt failed\n"); -#endif - goto err_out; - } - continue; - } else - goto err_out; - } - break; - } - s = sjcd_tray_lock(); - if (s < 0 || !sjcd_status_valid || sjcd_command_failed) { -#if defined( SJCD_DIAGNOSTIC ) - printk("SJCD: open: tray lock attempt failed\n"); -#endif - goto err_out; - } -#if defined( SJCD_TRACE ) - printk("SJCD: open: done\n"); -#endif - } - - ++sjcd_open_count; - return (0); - - err_out: - return (-EIO); -} - -/* - * On close, we flush all sjcd blocks from the buffer cache. - */ -static int sjcd_release(struct inode *inode, struct file *file) -{ - int s; - -#if defined( SJCD_TRACE ) - printk("SJCD: release\n"); -#endif - if (--sjcd_open_count == 0) { - sjcd_invalidate_buffers(); - s = sjcd_tray_unlock(); - if (s < 0 || !sjcd_status_valid || sjcd_command_failed) { -#if defined( SJCD_DIAGNOSTIC ) - printk - ("SJCD: release: tray unlock attempt failed.\n"); -#endif - } - if (sjcd_door_was_open) { - s = sjcd_tray_open(); - if (s < 0 || !sjcd_status_valid - || sjcd_command_failed) { -#if defined( SJCD_DIAGNOSTIC ) - printk - ("SJCD: release: tray unload attempt failed.\n"); -#endif - } - } - } - return 0; -} - -/* - * A list of file operations allowed for this cdrom. - */ -static struct block_device_operations sjcd_fops = { - .owner = THIS_MODULE, - .open = sjcd_open, - .release = sjcd_release, - .ioctl = sjcd_ioctl, - .media_changed = sjcd_disk_change, -}; - -/* - * Following stuff is intended for initialization of the cdrom. It - * first looks for presence of device. If the device is present, it - * will be reset. Then read the version of the drive and load status. - * The version is two BCD-coded bytes. - */ -static struct { - unsigned char major, minor; -} sjcd_version; - -static struct gendisk *sjcd_disk; - -/* - * Test for presence of drive and initialize it. Called at boot time. - * Probe cdrom, find out version and status. - */ -static int __init sjcd_init(void) -{ - int i; - - printk(KERN_INFO - "SJCD: Sanyo CDR-H94A cdrom driver version %d.%d.\n", - SJCD_VERSION_MAJOR, SJCD_VERSION_MINOR); - -#if defined( SJCD_TRACE ) - printk("SJCD: sjcd=0x%x: ", sjcd_base); -#endif - - if (register_blkdev(MAJOR_NR, "sjcd")) - return -EIO; - - sjcd_queue = blk_init_queue(do_sjcd_request, &sjcd_lock); - if (!sjcd_queue) - goto out0; - - blk_queue_hardsect_size(sjcd_queue, 2048); - - sjcd_disk = alloc_disk(1); - if (!sjcd_disk) { - printk(KERN_ERR "SJCD: can't allocate disk"); - goto out1; - } - sjcd_disk->major = MAJOR_NR, - sjcd_disk->first_minor = 0, - sjcd_disk->fops = &sjcd_fops, - sprintf(sjcd_disk->disk_name, "sjcd"); - - if (!request_region(sjcd_base, 4,"sjcd")) { - printk - ("SJCD: Init failed, I/O port (%X) is already in use\n", - sjcd_base); - goto out2; - } - - /* - * Check for card. Since we are booting now, we can't use standard - * wait algorithm. - */ - printk(KERN_INFO "SJCD: Resetting: "); - sjcd_send_cmd(SCMD_RESET); - for (i = 1000; i > 0 && !sjcd_status_valid; --i) { - unsigned long timer; - - /* - * Wait 10ms approx. - */ - for (timer = jiffies; time_before_eq(jiffies, timer);); - if ((i % 100) == 0) - printk("."); - (void) sjcd_check_status(); - } - if (i == 0 || sjcd_command_failed) { - printk(" reset failed, no drive found.\n"); - goto out3; - } else - printk("\n"); - - /* - * Get and print out cdrom version. - */ - printk(KERN_INFO "SJCD: Getting version: "); - sjcd_send_cmd(SCMD_GET_VERSION); - for (i = 1000; i > 0 && !sjcd_status_valid; --i) { - unsigned long timer; - - /* - * Wait 10ms approx. - */ - for (timer = jiffies; time_before_eq(jiffies, timer);); - if ((i % 100) == 0) - printk("."); - (void) sjcd_check_status(); - } - if (i == 0 || sjcd_command_failed) { - printk(" get version failed, no drive found.\n"); - goto out3; - } - - if (sjcd_load_response(&sjcd_version, sizeof(sjcd_version)) == 0) { - printk(" %1x.%02x\n", (int) sjcd_version.major, - (int) sjcd_version.minor); - } else { - printk(" read version failed, no drive found.\n"); - goto out3; - } - - /* - * Check and print out the tray state. (if it is needed?). - */ - if (!sjcd_status_valid) { - printk(KERN_INFO "SJCD: Getting status: "); - sjcd_send_cmd(SCMD_GET_STATUS); - for (i = 1000; i > 0 && !sjcd_status_valid; --i) { - unsigned long timer; - - /* - * Wait 10ms approx. - */ - for (timer = jiffies; - time_before_eq(jiffies, timer);); - if ((i % 100) == 0) - printk("."); - (void) sjcd_check_status(); - } - if (i == 0 || sjcd_command_failed) { - printk(" get status failed, no drive found.\n"); - goto out3; - } else - printk("\n"); - } - - printk(KERN_INFO "SJCD: Status: port=0x%x.\n", sjcd_base); - sjcd_disk->queue = sjcd_queue; - add_disk(sjcd_disk); - - sjcd_present++; - return (0); -out3: - release_region(sjcd_base, 4); -out2: - put_disk(sjcd_disk); -out1: - blk_cleanup_queue(sjcd_queue); -out0: - if ((unregister_blkdev(MAJOR_NR, "sjcd") == -EINVAL)) - printk("SJCD: cannot unregister device.\n"); - return (-EIO); -} - -static void __exit sjcd_exit(void) -{ - del_gendisk(sjcd_disk); - put_disk(sjcd_disk); - release_region(sjcd_base, 4); - blk_cleanup_queue(sjcd_queue); - if ((unregister_blkdev(MAJOR_NR, "sjcd") == -EINVAL)) - printk("SJCD: cannot unregister device.\n"); - printk(KERN_INFO "SJCD: module: removed.\n"); -} - -module_init(sjcd_init); -module_exit(sjcd_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS_BLOCKDEV_MAJOR(SANYO_CDROM_MAJOR); diff --git a/drivers/cdrom/sjcd.h b/drivers/cdrom/sjcd.h deleted file mode 100644 index 0aa5e714659..00000000000 --- a/drivers/cdrom/sjcd.h +++ /dev/null @@ -1,181 +0,0 @@ -/* - * Definitions for a Sanyo CD-ROM interface. - * - * Copyright (C) 1995 Vadim V. Model - * model@cecmow.enet.dec.com - * vadim@rbrf.msk.su - * vadim@ipsun.ras.ru - * Eric van der Maarel - * H.T.M.v.d.Maarel@marin.nl - * - * This information is based on mcd.c from M. Harriss and sjcd102.lst from - * E. Moenkeberg. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __SJCD_H__ -#define __SJCD_H__ - -/* - * Change this to set the I/O port address as default. More flexibility - * come with setup implementation. - */ -#define SJCD_BASE_ADDR 0x340 - -/* - * Change this to set the irq as default. Really SANYO do not use interrupts - * at all. - */ -#define SJCD_INTR_NR 0 - -/* - * Change this to set the dma as default value. really SANYO does not use - * direct memory access at all. - */ -#define SJCD_DMA_NR 0 - -/* - * Macros which allow us to find out the status of the drive. - */ -#define SJCD_STATUS_AVAILABLE( x ) (((x)&0x02)==0) -#define SJCD_DATA_AVAILABLE( x ) (((x)&0x01)==0) - -/* - * Port access macro. Three ports are available: S-data port (command port), - * status port (read only) and D-data port (read only). - */ -#define SJCDPORT( x ) ( sjcd_base + ( x ) ) -#define SJCD_STATUS_PORT SJCDPORT( 1 ) -#define SJCD_S_DATA_PORT SJCDPORT( 0 ) -#define SJCD_COMMAND_PORT SJCDPORT( 0 ) -#define SJCD_D_DATA_PORT SJCDPORT( 2 ) - -/* - * Drive info bits. Drive info available as first (mandatory) byte of - * command completion status. - */ -#define SST_NOT_READY 0x10 /* no disk in the drive (???) */ -#define SST_MEDIA_CHANGED 0x20 /* disk is changed */ -#define SST_DOOR_OPENED 0x40 /* door is open */ - -/* commands */ - -#define SCMD_EJECT_TRAY 0xD0 /* eject tray if not locked */ -#define SCMD_LOCK_TRAY 0xD2 /* lock tray when in */ -#define SCMD_UNLOCK_TRAY 0xD4 /* unlock tray when in */ -#define SCMD_CLOSE_TRAY 0xD6 /* load tray in */ - -#define SCMD_RESET 0xFA /* soft reset */ -#define SCMD_GET_STATUS 0x80 -#define SCMD_GET_VERSION 0xCC - -#define SCMD_DATA_READ 0xA0 /* are the same, depend on mode&args */ -#define SCMD_SEEK 0xA0 -#define SCMD_PLAY 0xA0 - -#define SCMD_GET_QINFO 0xA8 - -#define SCMD_SET_MODE 0xC4 -#define SCMD_MODE_PLAY 0xE0 -#define SCMD_MODE_COOKED (0xF8 & ~0x20) -#define SCMD_MODE_RAW 0xF9 -#define SCMD_MODE_x20_BIT 0x20 /* What is it for ? */ - -#define SCMD_SET_VOLUME 0xAE -#define SCMD_PAUSE 0xE0 -#define SCMD_STOP 0xE0 - -#define SCMD_GET_DISK_INFO 0xAA - -/* - * Some standard arguments for SCMD_GET_DISK_INFO. - */ -#define SCMD_GET_1_TRACK 0xA0 /* get the first track information */ -#define SCMD_GET_L_TRACK 0xA1 /* get the last track information */ -#define SCMD_GET_D_SIZE 0xA2 /* get the whole disk information */ - -/* - * Borrowed from hd.c. Allows to optimize multiple port read commands. - */ -#define S_READ_DATA( port, buf, nr ) insb( port, buf, nr ) - -/* - * We assume that there are no audio disks with TOC length more than this - * number (I personally have never seen disks with more than 20 fragments). - */ -#define SJCD_MAX_TRACKS 100 - -struct msf { - unsigned char min; - unsigned char sec; - unsigned char frame; -}; - -struct sjcd_hw_disk_info { - unsigned char track_control; - unsigned char track_no; - unsigned char x, y, z; - union { - unsigned char track_no; - struct msf track_msf; - } un; -}; - -struct sjcd_hw_qinfo { - unsigned char track_control; - unsigned char track_no; - unsigned char x; - struct msf rel; - struct msf abs; -}; - -struct sjcd_play_msf { - struct msf start; - struct msf end; -}; - -struct sjcd_disk_info { - unsigned char first; - unsigned char last; - struct msf disk_length; - struct msf first_track; -}; - -struct sjcd_toc { - unsigned char ctrl_addr; - unsigned char track; - unsigned char point_index; - struct msf track_time; - struct msf disk_time; -}; - -#if defined( SJCD_GATHER_STAT ) - -struct sjcd_stat { - int ticks; - int tticks[ 8 ]; - int idle_ticks; - int start_ticks; - int mode_ticks; - int read_ticks; - int data_ticks; - int stop_ticks; - int stopping_ticks; -}; - -#endif - -#endif diff --git a/drivers/cdrom/sonycd535.c b/drivers/cdrom/sonycd535.c deleted file mode 100644 index f77ada933ea..00000000000 --- a/drivers/cdrom/sonycd535.c +++ /dev/null @@ -1,1689 +0,0 @@ -/* - * Sony CDU-535 interface device driver - * - * This is a modified version of the CDU-31A device driver (see below). - * Changes were made using documentation for the CDU-531 (which Sony - * assures me is very similar to the 535) and partial disassembly of the - * DOS driver. I used Minyard's driver and replaced the CDU-31A - * commands with the CDU-531 commands. This was complicated by a different - * interface protocol with the drive. The driver is still polled. - * - * Data transfer rate is about 110 Kb/sec, theoretical maximum is 150 Kb/sec. - * I tried polling without the sony_sleep during the data transfers but - * it did not speed things up any. - * - * 1993-05-23 (rgj) changed the major number to 21 to get rid of conflict - * with CDU-31A driver. This is the also the number from the Linux - * Device Driver Registry for the Sony Drive. Hope nobody else is using it. - * - * 1993-08-29 (rgj) remove the configuring of the interface board address - * from the top level configuration, you have to modify it in this file. - * - * 1995-01-26 Made module-capable (Joel Katz <Stimpson@Panix.COM>) - * - * 1995-05-20 - * Modified to support CDU-510/515 series - * (Claudio Porfiri<C.Porfiri@nisms.tei.ericsson.se>) - * Fixed to report verify_area() failures - * (Heiko Eissfeldt <heiko@colossus.escape.de>) - * - * 1995-06-01 - * More changes to support CDU-510/515 series - * (Claudio Porfiri<C.Porfiri@nisms.tei.ericsson.se>) - * - * November 1999 -- Make kernel-parameter implementation work with 2.3.x - * Removed init_module & cleanup_module in favor of - * module_init & module_exit. - * Torben Mathiasen <tmm@image.dk> - * - * September 2003 - Fix SMP support by removing cli/sti calls. - * Using spinlocks with a wait_queue instead. - * Felipe Damasio <felipewd@terra.com.br> - * - * Things to do: - * - handle errors and status better, put everything into a single word - * - use interrupts (code mostly there, but a big hole still missing) - * - handle multi-session CDs? - * - use DMA? - * - * Known Bugs: - * - - * - * Ken Pizzini (ken@halcyon.com) - * - * Original by: - * Ron Jeppesen (ronj.an@site007.saic.com) - * - * - *------------------------------------------------------------------------ - * Sony CDROM interface device driver. - * - * Corey Minyard (minyard@wf-rch.cirr.com) (CDU-535 complaints to Ken above) - * - * Colossians 3:17 - * - * The Sony interface device driver handles Sony interface CDROM - * drives and provides a complete block-level interface as well as an - * ioctl() interface compatible with the Sun (as specified in - * include/linux/cdrom.h). With this interface, CDROMs can be - * accessed and standard audio CDs can be played back normally. - * - * This interface is (unfortunately) a polled interface. This is - * because most Sony interfaces are set up with DMA and interrupts - * disables. Some (like mine) do not even have the capability to - * handle interrupts or DMA. For this reason you will see a bit of - * the following: - * - * snap = jiffies; - * while (jiffies-snap < SONY_JIFFIES_TIMEOUT) - * { - * if (some_condition()) - * break; - * sony_sleep(); - * } - * if (some_condition not met) - * { - * return an_error; - * } - * - * This ugly hack waits for something to happen, sleeping a little - * between every try. (The conditional is written so that jiffies - * wrap-around is handled properly.) - * - * One thing about these drives: They talk in MSF (Minute Second Frame) format. - * There are 75 frames a second, 60 seconds a minute, and up to 75 minutes on a - * disk. The funny thing is that these are sent to the drive in BCD, but the - * interface wants to see them in decimal. A lot of conversion goes on. - * - * Copyright (C) 1993 Corey Minyard - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - - -# include <linux/module.h> - -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/hdreg.h> -#include <linux/genhd.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/init.h> - -#define REALLY_SLOW_IO -#include <asm/system.h> -#include <asm/io.h> -#include <asm/uaccess.h> - -#include <linux/cdrom.h> - -#define MAJOR_NR CDU535_CDROM_MAJOR -#include <linux/blkdev.h> - -#define sony535_cd_base_io sonycd535 /* for compatible parameter passing with "insmod" */ -#include "sonycd535.h" - -/* - * this is the base address of the interface card for the Sony CDU-535 - * CDROM drive. If your jumpers are set for an address other than - * this one (the default), change the following line to the - * proper address. - */ -#ifndef CDU535_ADDRESS -# define CDU535_ADDRESS 0x340 -#endif -#ifndef CDU535_INTERRUPT -# define CDU535_INTERRUPT 0 -#endif -#ifndef CDU535_HANDLE -# define CDU535_HANDLE "cdu535" -#endif -#ifndef CDU535_MESSAGE_NAME -# define CDU535_MESSAGE_NAME "Sony CDU-535" -#endif - -#define CDU535_BLOCK_SIZE 2048 - -#ifndef MAX_SPINUP_RETRY -# define MAX_SPINUP_RETRY 3 /* 1 is sufficient for most drives... */ -#endif -#ifndef RETRY_FOR_BAD_STATUS -# define RETRY_FOR_BAD_STATUS 100 /* in 10th of second */ -#endif - -#ifndef DEBUG -# define DEBUG 1 -#endif - -/* - * SONY535_BUFFER_SIZE determines the size of internal buffer used - * by the drive. It must be at least 2K and the larger the buffer - * the better the transfer rate. It does however take system memory. - * On my system I get the following transfer rates using dd to read - * 10 Mb off /dev/cdrom. - * - * 8K buffer 43 Kb/sec - * 16K buffer 66 Kb/sec - * 32K buffer 91 Kb/sec - * 64K buffer 111 Kb/sec - * 128K buffer 123 Kb/sec - * 512K buffer 123 Kb/sec - */ -#define SONY535_BUFFER_SIZE (64*1024) - -/* - * if LOCK_DOORS is defined then the eject button is disabled while - * the device is open. - */ -#ifndef NO_LOCK_DOORS -# define LOCK_DOORS -#endif - -static int read_subcode(void); -static void sony_get_toc(void); -static int cdu_open(struct inode *inode, struct file *filp); -static inline unsigned int int_to_bcd(unsigned int val); -static unsigned int bcd_to_int(unsigned int bcd); -static int do_sony_cmd(Byte * cmd, int nCmd, Byte status[2], - Byte * response, int n_response, int ignoreStatusBit7); - -/* The base I/O address of the Sony Interface. This is a variable (not a - #define) so it can be easily changed via some future ioctl() */ -static unsigned int sony535_cd_base_io = CDU535_ADDRESS; -module_param(sony535_cd_base_io, int, 0); - -/* - * The following are I/O addresses of the various registers for the drive. The - * comment for the base address also applies here. - */ -static unsigned short select_unit_reg; -static unsigned short result_reg; -static unsigned short command_reg; -static unsigned short read_status_reg; -static unsigned short data_reg; - -static DEFINE_SPINLOCK(sonycd535_lock); /* queue lock */ -static struct request_queue *sonycd535_queue; - -static int initialized; /* Has the drive been initialized? */ -static int sony_disc_changed = 1; /* Has the disk been changed - since the last check? */ -static int sony_toc_read; /* Has the table of contents been - read? */ -static unsigned int sony_buffer_size; /* Size in bytes of the read-ahead - buffer. */ -static unsigned int sony_buffer_sectors; /* Size (in 2048 byte records) of - the read-ahead buffer. */ -static unsigned int sony_usage; /* How many processes have the - drive open. */ - -static int sony_first_block = -1; /* First OS block (512 byte) in - the read-ahead buffer */ -static int sony_last_block = -1; /* Last OS block (512 byte) in - the read-ahead buffer */ - -static struct s535_sony_toc *sony_toc; /* Points to the table of - contents. */ - -static struct s535_sony_subcode *last_sony_subcode; /* Points to the last - subcode address read */ -static Byte **sony_buffer; /* Points to the pointers - to the sector buffers */ - -static int sony_inuse; /* is the drive in use? Only one - open at a time allowed */ - -/* - * The audio status uses the values from read subchannel data as specified - * in include/linux/cdrom.h. - */ -static int sony_audio_status = CDROM_AUDIO_NO_STATUS; - -/* - * The following are a hack for pausing and resuming audio play. The drive - * does not work as I would expect it, if you stop it then start it again, - * the drive seeks back to the beginning and starts over. This holds the - * position during a pause so a resume can restart it. It uses the - * audio status variable above to tell if it is paused. - * I just kept the CDU-31A driver behavior rather than using the PAUSE - * command on the CDU-535. - */ -static Byte cur_pos_msf[3]; -static Byte final_pos_msf[3]; - -/* What IRQ is the drive using? 0 if none. */ -static int sony535_irq_used = CDU535_INTERRUPT; - -/* The interrupt handler will wake this queue up when it gets an interrupt. */ -static DECLARE_WAIT_QUEUE_HEAD(cdu535_irq_wait); - - -/* - * This routine returns 1 if the disk has been changed since the last - * check or 0 if it hasn't. Setting flag to 0 resets the changed flag. - */ -static int -cdu535_check_media_change(struct gendisk *disk) -{ - /* if driver is not initialized, always return 0 */ - int retval = initialized ? sony_disc_changed : 0; - sony_disc_changed = 0; - return retval; -} - -static inline void -enable_interrupts(void) -{ -#ifdef USE_IRQ - /* - * This code was taken from cdu31a.c; it will not - * directly work for the cdu535 as written... - */ - curr_control_reg |= ( SONY_ATTN_INT_EN_BIT - | SONY_RES_RDY_INT_EN_BIT - | SONY_DATA_RDY_INT_EN_BIT); - outb(curr_control_reg, sony_cd_control_reg); -#endif -} - -static inline void -disable_interrupts(void) -{ -#ifdef USE_IRQ - /* - * This code was taken from cdu31a.c; it will not - * directly work for the cdu535 as written... - */ - curr_control_reg &= ~(SONY_ATTN_INT_EN_BIT - | SONY_RES_RDY_INT_EN_BIT - | SONY_DATA_RDY_INT_EN_BIT); - outb(curr_control_reg, sony_cd_control_reg); -#endif -} - -static irqreturn_t -cdu535_interrupt(int irq, void *dev_id) -{ - disable_interrupts(); - if (waitqueue_active(&cdu535_irq_wait)) { - wake_up(&cdu535_irq_wait); - return IRQ_HANDLED; - } - printk(CDU535_MESSAGE_NAME - ": Got an interrupt but nothing was waiting\n"); - return IRQ_NONE; -} - - -/* - * Wait a little while. - */ -static inline void -sony_sleep(void) -{ - if (sony535_irq_used <= 0) { /* poll */ - yield(); - } else { /* Interrupt driven */ - DEFINE_WAIT(wait); - - spin_lock_irq(&sonycd535_lock); - enable_interrupts(); - prepare_to_wait(&cdu535_irq_wait, &wait, TASK_INTERRUPTIBLE); - spin_unlock_irq(&sonycd535_lock); - schedule(); - finish_wait(&cdu535_irq_wait, &wait); - } -} - -/*------------------start of SONY CDU535 very specific ---------------------*/ - -/**************************************************************************** - * void select_unit( int unit_no ) - * - * Select the specified unit (0-3) so that subsequent commands reference it - ****************************************************************************/ -static void -select_unit(int unit_no) -{ - unsigned int select_mask = ~(1 << unit_no); - outb(select_mask, select_unit_reg); -} - -/*************************************************************************** - * int read_result_reg( Byte *data_ptr ) - * - * Read a result byte from the Sony CDU controller, store in location pointed - * to by data_ptr. Return zero on success, TIME_OUT if we did not receive - * data. - ***************************************************************************/ -static int -read_result_reg(Byte *data_ptr) -{ - unsigned long snap; - int read_status; - - snap = jiffies; - while (jiffies-snap < SONY_JIFFIES_TIMEOUT) { - read_status = inb(read_status_reg); - if ((read_status & SONY535_RESULT_NOT_READY_BIT) == 0) { -#if DEBUG > 1 - printk(CDU535_MESSAGE_NAME - ": read_result_reg(): readStatReg = 0x%x\n", read_status); -#endif - *data_ptr = inb(result_reg); - return 0; - } else { - sony_sleep(); - } - } - printk(CDU535_MESSAGE_NAME " read_result_reg: TIME OUT!\n"); - return TIME_OUT; -} - -/**************************************************************************** - * int read_exec_status( Byte status[2] ) - * - * Read the execution status of the last command and put into status. - * Handles reading second status word if available. Returns 0 on success, - * TIME_OUT on failure. - ****************************************************************************/ -static int -read_exec_status(Byte status[2]) -{ - status[1] = 0; - if (read_result_reg(&(status[0])) != 0) - return TIME_OUT; - if ((status[0] & 0x80) != 0) { /* byte two follows */ - if (read_result_reg(&(status[1])) != 0) - return TIME_OUT; - } -#if DEBUG > 1 - printk(CDU535_MESSAGE_NAME ": read_exec_status: read 0x%x 0x%x\n", - status[0], status[1]); -#endif - return 0; -} - -/**************************************************************************** - * int check_drive_status( void ) - * - * Check the current drive status. Using this before executing a command - * takes care of the problem of unsolicited drive status-2 messages. - * Add a check of the audio status if we think the disk is playing. - ****************************************************************************/ -static int -check_drive_status(void) -{ - Byte status, e_status[2]; - int CDD, ATN; - Byte cmd; - - select_unit(0); - if (sony_audio_status == CDROM_AUDIO_PLAY) { /* check status */ - outb(SONY535_REQUEST_AUDIO_STATUS, command_reg); - if (read_result_reg(&status) == 0) { - switch (status) { - case 0x0: - break; /* play in progress */ - case 0x1: - break; /* paused */ - case 0x3: /* audio play completed */ - case 0x5: /* play not requested */ - sony_audio_status = CDROM_AUDIO_COMPLETED; - read_subcode(); - break; - case 0x4: /* error during play */ - sony_audio_status = CDROM_AUDIO_ERROR; - break; - } - } - } - /* now check drive status */ - outb(SONY535_REQUEST_DRIVE_STATUS_2, command_reg); - if (read_result_reg(&status) != 0) - return TIME_OUT; - -#if DEBUG > 1 - printk(CDU535_MESSAGE_NAME ": check_drive_status() got 0x%x\n", status); -#endif - - if (status == 0) - return 0; - - ATN = status & 0xf; - CDD = (status >> 4) & 0xf; - - switch (ATN) { - case 0x0: - break; /* go on to CDD stuff */ - case SONY535_ATN_BUSY: - if (initialized) - printk(CDU535_MESSAGE_NAME " error: drive busy\n"); - return CD_BUSY; - case SONY535_ATN_EJECT_IN_PROGRESS: - printk(CDU535_MESSAGE_NAME " error: eject in progress\n"); - sony_audio_status = CDROM_AUDIO_INVALID; - return CD_BUSY; - case SONY535_ATN_RESET_OCCURRED: - case SONY535_ATN_DISC_CHANGED: - case SONY535_ATN_RESET_AND_DISC_CHANGED: -#if DEBUG > 0 - printk(CDU535_MESSAGE_NAME " notice: reset occurred or disc changed\n"); -#endif - sony_disc_changed = 1; - sony_toc_read = 0; - sony_audio_status = CDROM_AUDIO_NO_STATUS; - sony_first_block = -1; - sony_last_block = -1; - if (initialized) { - cmd = SONY535_SPIN_UP; - do_sony_cmd(&cmd, 1, e_status, NULL, 0, 0); - sony_get_toc(); - } - return 0; - default: - printk(CDU535_MESSAGE_NAME " error: drive busy (ATN=0x%x)\n", ATN); - return CD_BUSY; - } - switch (CDD) { /* the 531 docs are not helpful in decoding this */ - case 0x0: /* just use the values from the DOS driver */ - case 0x2: - case 0xa: - break; /* no error */ - case 0xc: - printk(CDU535_MESSAGE_NAME - ": check_drive_status(): CDD = 0xc! Not properly handled!\n"); - return CD_BUSY; /* ? */ - default: - return CD_BUSY; - } - return 0; -} /* check_drive_status() */ - -/***************************************************************************** - * int do_sony_cmd( Byte *cmd, int n_cmd, Byte status[2], - * Byte *response, int n_response, int ignore_status_bit7 ) - * - * Generic routine for executing commands. The command and its parameters - * should be placed in the cmd[] array, number of bytes in the command is - * stored in nCmd. The response from the command will be stored in the - * response array. The number of bytes you expect back (excluding status) - * should be passed in n_response. Finally, some - * commands set bit 7 of the return status even when there is no second - * status byte, on these commands set ignoreStatusBit7 TRUE. - * If the command was sent and data received back, then we return 0, - * else we return TIME_OUT. You still have to check the status yourself. - * You should call check_drive_status() before calling this routine - * so that you do not lose notifications of disk changes, etc. - ****************************************************************************/ -static int -do_sony_cmd(Byte * cmd, int n_cmd, Byte status[2], - Byte * response, int n_response, int ignore_status_bit7) -{ - int i; - - /* write out the command */ - for (i = 0; i < n_cmd; i++) - outb(cmd[i], command_reg); - - /* read back the status */ - if (read_result_reg(status) != 0) - return TIME_OUT; - if (!ignore_status_bit7 && ((status[0] & 0x80) != 0)) { - /* get second status byte */ - if (read_result_reg(status + 1) != 0) - return TIME_OUT; - } else { - status[1] = 0; - } -#if DEBUG > 2 - printk(CDU535_MESSAGE_NAME ": do_sony_cmd %x: %x %x\n", - *cmd, status[0], status[1]); -#endif - - /* do not know about when I should read set of data and when not to */ - if ((status[0] & ((ignore_status_bit7 ? 0x7f : 0xff) & 0x8f)) != 0) - return 0; - - /* else, read in rest of data */ - for (i = 0; 0 < n_response; n_response--, i++) - if (read_result_reg(response + i) != 0) - return TIME_OUT; - return 0; -} /* do_sony_cmd() */ - -/************************************************************************** - * int set_drive_mode( int mode, Byte status[2] ) - * - * Set the drive mode to the specified value (mode=0 is audio, mode=e0 - * is mode-1 CDROM - **************************************************************************/ -static int -set_drive_mode(int mode, Byte status[2]) -{ - Byte cmd_buff[2]; - Byte ret_buff[1]; - - cmd_buff[0] = SONY535_SET_DRIVE_MODE; - cmd_buff[1] = mode; - return do_sony_cmd(cmd_buff, 2, status, ret_buff, 1, 1); -} - -/*************************************************************************** - * int seek_and_read_N_blocks( Byte params[], int n_blocks, Byte status[2], - * Byte *data_buff, int buff_size ) - * - * Read n_blocks of data from the CDROM starting at position params[0:2], - * number of blocks in stored in params[3:5] -- both these are already - * int bcd format. - * Transfer the data into the buffer pointed at by data_buff. buff_size - * gives the number of bytes available in the buffer. - * The routine returns number of bytes read in if successful, otherwise - * it returns one of the standard error returns. - ***************************************************************************/ -static int -seek_and_read_N_blocks(Byte params[], int n_blocks, Byte status[2], - Byte **buff, int buf_size) -{ - Byte cmd_buff[7]; - int i; - int read_status; - unsigned long snap; - Byte *data_buff; - int sector_count = 0; - - if (buf_size < CDU535_BLOCK_SIZE * n_blocks) - return NO_ROOM; - - set_drive_mode(SONY535_CDROM_DRIVE_MODE, status); - - /* send command to read the data */ - cmd_buff[0] = SONY535_SEEK_AND_READ_N_BLOCKS_1; - for (i = 0; i < 6; i++) - cmd_buff[i + 1] = params[i]; - for (i = 0; i < 7; i++) - outb(cmd_buff[i], command_reg); - - /* read back the data one block at a time */ - while (0 < n_blocks--) { - /* wait for data to be ready */ - int data_valid = 0; - snap = jiffies; - while (jiffies-snap < SONY_JIFFIES_TIMEOUT) { - read_status = inb(read_status_reg); - if ((read_status & SONY535_RESULT_NOT_READY_BIT) == 0) { - read_exec_status(status); - return BAD_STATUS; - } - if ((read_status & SONY535_DATA_NOT_READY_BIT) == 0) { - /* data is ready, read it */ - data_buff = buff[sector_count++]; - for (i = 0; i < CDU535_BLOCK_SIZE; i++) - *data_buff++ = inb(data_reg); /* unrolling this loop does not seem to help */ - data_valid = 1; - break; /* exit the timeout loop */ - } - sony_sleep(); /* data not ready, sleep a while */ - } - if (!data_valid) - return TIME_OUT; /* if we reach this stage */ - } - - /* read all the data, now read the status */ - if ((i = read_exec_status(status)) != 0) - return i; - return CDU535_BLOCK_SIZE * sector_count; -} /* seek_and_read_N_blocks() */ - -/**************************************************************************** - * int request_toc_data( Byte status[2], struct s535_sony_toc *toc ) - * - * Read in the table of contents data. Converts all the bcd data - * into integers in the toc structure. - ****************************************************************************/ -static int -request_toc_data(Byte status[2], struct s535_sony_toc *toc) -{ - int to_status; - int i, j, n_tracks, track_no; - int first_track_num, last_track_num; - Byte cmd_no = 0xb2; - Byte track_address_buffer[5]; - - /* read the fixed portion of the table of contents */ - if ((to_status = do_sony_cmd(&cmd_no, 1, status, (Byte *) toc, 15, 1)) != 0) - return to_status; - - /* convert the data into integers so we can use them */ - first_track_num = bcd_to_int(toc->first_track_num); - last_track_num = bcd_to_int(toc->last_track_num); - n_tracks = last_track_num - first_track_num + 1; - - /* read each of the track address descriptors */ - for (i = 0; i < n_tracks; i++) { - /* read the descriptor into a temporary buffer */ - for (j = 0; j < 5; j++) { - if (read_result_reg(track_address_buffer + j) != 0) - return TIME_OUT; - if (j == 1) /* need to convert from bcd */ - track_no = bcd_to_int(track_address_buffer[j]); - } - /* copy the descriptor to proper location - sonycd.c just fills */ - memcpy(toc->tracks + i, track_address_buffer, 5); - } - return 0; -} /* request_toc_data() */ - -/*************************************************************************** - * int spin_up_drive( Byte status[2] ) - * - * Spin up the drive (unless it is already spinning). - ***************************************************************************/ -static int -spin_up_drive(Byte status[2]) -{ - Byte cmd; - - /* first see if the drive is already spinning */ - cmd = SONY535_REQUEST_DRIVE_STATUS_1; - if (do_sony_cmd(&cmd, 1, status, NULL, 0, 0) != 0) - return TIME_OUT; - if ((status[0] & SONY535_STATUS1_NOT_SPINNING) == 0) - return 0; /* it's already spinning */ - - /* otherwise, give the spin-up command */ - cmd = SONY535_SPIN_UP; - return do_sony_cmd(&cmd, 1, status, NULL, 0, 0); -} - -/*--------------------end of SONY CDU535 very specific ---------------------*/ - -/* Convert from an integer 0-99 to BCD */ -static inline unsigned int -int_to_bcd(unsigned int val) -{ - int retval; - - retval = (val / 10) << 4; - retval = retval | val % 10; - return retval; -} - - -/* Convert from BCD to an integer from 0-99 */ -static unsigned int -bcd_to_int(unsigned int bcd) -{ - return (((bcd >> 4) & 0x0f) * 10) + (bcd & 0x0f); -} - - -/* - * Convert a logical sector value (like the OS would want to use for - * a block device) to an MSF format. - */ -static void -log_to_msf(unsigned int log, Byte *msf) -{ - log = log + LOG_START_OFFSET; - msf[0] = int_to_bcd(log / 4500); - log = log % 4500; - msf[1] = int_to_bcd(log / 75); - msf[2] = int_to_bcd(log % 75); -} - - -/* - * Convert an MSF format to a logical sector. - */ -static unsigned int -msf_to_log(Byte *msf) -{ - unsigned int log; - - - log = bcd_to_int(msf[2]); - log += bcd_to_int(msf[1]) * 75; - log += bcd_to_int(msf[0]) * 4500; - log = log - LOG_START_OFFSET; - - return log; -} - - -/* - * Take in integer size value and put it into a buffer like - * the drive would want to see a number-of-sector value. - */ -static void -size_to_buf(unsigned int size, Byte *buf) -{ - buf[0] = size / 65536; - size = size % 65536; - buf[1] = size / 256; - buf[2] = size % 256; -} - - -/* - * The OS calls this to perform a read or write operation to the drive. - * Write obviously fail. Reads to a read ahead of sony_buffer_size - * bytes to help speed operations. This especially helps since the OS - * may use 1024 byte blocks and the drive uses 2048 byte blocks. Since most - * data access on a CD is done sequentially, this saves a lot of operations. - */ -static void -do_cdu535_request(request_queue_t * q) -{ - struct request *req; - unsigned int read_size; - int block; - int nsect; - int copyoff; - int spin_up_retry; - Byte params[10]; - Byte status[2]; - Byte cmd[2]; - - while (1) { - req = elv_next_request(q); - if (!req) - return; - - block = req->sector; - nsect = req->nr_sectors; - if (!blk_fs_request(req)) { - end_request(req, 0); - continue; - } - if (rq_data_dir(req) == WRITE) { - end_request(req, 0); - continue; - } - /* - * If the block address is invalid or the request goes beyond - * the end of the media, return an error. - */ - if (sony_toc->lead_out_start_lba <= (block/4)) { - end_request(req, 0); - return; - } - if (sony_toc->lead_out_start_lba <= ((block + nsect) / 4)) { - end_request(req, 0); - return; - } - while (0 < nsect) { - /* - * If the requested sector is not currently in - * the read-ahead buffer, it must be read in. - */ - if ((block < sony_first_block) || (sony_last_block < block)) { - sony_first_block = (block / 4) * 4; - log_to_msf(block / 4, params); - - /* - * If the full read-ahead would go beyond the end of the media, trim - * it back to read just till the end of the media. - */ - if (sony_toc->lead_out_start_lba <= ((block / 4) + sony_buffer_sectors)) { - sony_last_block = (sony_toc->lead_out_start_lba * 4) - 1; - read_size = sony_toc->lead_out_start_lba - (block / 4); - } else { - sony_last_block = sony_first_block + (sony_buffer_sectors * 4) - 1; - read_size = sony_buffer_sectors; - } - size_to_buf(read_size, ¶ms[3]); - - /* - * Read the data. If the drive was not spinning, - * spin it up and try some more. - */ - for (spin_up_retry=0 ;; ++spin_up_retry) { - /* This loop has been modified to support the Sony - * CDU-510/515 series, thanks to Claudio Porfiri - * <C.Porfiri@nisms.tei.ericsson.se>. - */ - /* - * This part is to deal with very slow hardware. We - * try at most MAX_SPINUP_RETRY times to read the same - * block. A check for seek_and_read_N_blocks' result is - * performed; if the result is wrong, the CDROM's engine - * is restarted and the operation is tried again. - */ - /* - * 1995-06-01: The system got problems when downloading - * from Slackware CDROM, the problem seems to be: - * seek_and_read_N_blocks returns BAD_STATUS and we - * should wait for a while before retrying, so a new - * part was added to discriminate the return value from - * seek_and_read_N_blocks for the various cases. - */ - int readStatus = seek_and_read_N_blocks(params, read_size, - status, sony_buffer, (read_size * CDU535_BLOCK_SIZE)); - if (0 <= readStatus) /* Good data; common case, placed first */ - break; - if (readStatus == NO_ROOM || spin_up_retry == MAX_SPINUP_RETRY) { - /* give up */ - if (readStatus == NO_ROOM) - printk(CDU535_MESSAGE_NAME " No room to read from CD\n"); - else - printk(CDU535_MESSAGE_NAME " Read error: 0x%.2x\n", - status[0]); - sony_first_block = -1; - sony_last_block = -1; - end_request(req, 0); - return; - } - if (readStatus == BAD_STATUS) { - /* Sleep for a while, then retry */ - set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irq(&sonycd535_lock); - schedule_timeout(RETRY_FOR_BAD_STATUS*HZ/10); - spin_lock_irq(&sonycd535_lock); - } -#if DEBUG > 0 - printk(CDU535_MESSAGE_NAME - " debug: calling spin up when reading data!\n"); -#endif - cmd[0] = SONY535_SPIN_UP; - do_sony_cmd(cmd, 1, status, NULL, 0, 0); - } - } - /* - * The data is in memory now, copy it to the buffer and advance to the - * next block to read. - */ - copyoff = block - sony_first_block; - memcpy(req->buffer, - sony_buffer[copyoff / 4] + 512 * (copyoff % 4), 512); - - block += 1; - nsect -= 1; - req->buffer += 512; - } - - end_request(req, 1); - } -} - -/* - * Read the table of contents from the drive and set sony_toc_read if - * successful. - */ -static void -sony_get_toc(void) -{ - Byte status[2]; - if (!sony_toc_read) { - /* do not call check_drive_status() from here since it can call this routine */ - if (request_toc_data(status, sony_toc) < 0) - return; - sony_toc->lead_out_start_lba = msf_to_log(sony_toc->lead_out_start_msf); - sony_toc_read = 1; - } -} - - -/* - * Search for a specific track in the table of contents. track is - * passed in bcd format - */ -static int -find_track(int track) -{ - int i; - int num_tracks; - - - num_tracks = bcd_to_int(sony_toc->last_track_num) - - bcd_to_int(sony_toc->first_track_num) + 1; - for (i = 0; i < num_tracks; i++) { - if (sony_toc->tracks[i].track == track) { - return i; - } - } - - return -1; -} - -/* - * Read the subcode and put it int last_sony_subcode for future use. - */ -static int -read_subcode(void) -{ - Byte cmd = SONY535_REQUEST_SUB_Q_DATA; - Byte status[2]; - int dsc_status; - - if (check_drive_status() != 0) - return -EIO; - - if ((dsc_status = do_sony_cmd(&cmd, 1, status, (Byte *) last_sony_subcode, - sizeof(struct s535_sony_subcode), 1)) != 0) { - printk(CDU535_MESSAGE_NAME " error 0x%.2x, %d (read_subcode)\n", - status[0], dsc_status); - return -EIO; - } - return 0; -} - - -/* - * Get the subchannel info like the CDROMSUBCHNL command wants to see it. If - * the drive is playing, the subchannel needs to be read (since it would be - * changing). If the drive is paused or completed, the subcode information has - * already been stored, just use that. The ioctl call wants things in decimal - * (not BCD), so all the conversions are done. - */ -static int -sony_get_subchnl_info(void __user *arg) -{ - struct cdrom_subchnl schi; - - /* Get attention stuff */ - if (check_drive_status() != 0) - return -EIO; - - sony_get_toc(); - if (!sony_toc_read) { - return -EIO; - } - if (copy_from_user(&schi, arg, sizeof schi)) - return -EFAULT; - - switch (sony_audio_status) { - case CDROM_AUDIO_PLAY: - if (read_subcode() < 0) { - return -EIO; - } - break; - - case CDROM_AUDIO_PAUSED: - case CDROM_AUDIO_COMPLETED: - break; - - case CDROM_AUDIO_NO_STATUS: - schi.cdsc_audiostatus = sony_audio_status; - if (copy_to_user(arg, &schi, sizeof schi)) - return -EFAULT; - return 0; - break; - - case CDROM_AUDIO_INVALID: - case CDROM_AUDIO_ERROR: - default: - return -EIO; - } - - schi.cdsc_audiostatus = sony_audio_status; - schi.cdsc_adr = last_sony_subcode->address; - schi.cdsc_ctrl = last_sony_subcode->control; - schi.cdsc_trk = bcd_to_int(last_sony_subcode->track_num); - schi.cdsc_ind = bcd_to_int(last_sony_subcode->index_num); - if (schi.cdsc_format == CDROM_MSF) { - schi.cdsc_absaddr.msf.minute = bcd_to_int(last_sony_subcode->abs_msf[0]); - schi.cdsc_absaddr.msf.second = bcd_to_int(last_sony_subcode->abs_msf[1]); - schi.cdsc_absaddr.msf.frame = bcd_to_int(last_sony_subcode->abs_msf[2]); - - schi.cdsc_reladdr.msf.minute = bcd_to_int(last_sony_subcode->rel_msf[0]); - schi.cdsc_reladdr.msf.second = bcd_to_int(last_sony_subcode->rel_msf[1]); - schi.cdsc_reladdr.msf.frame = bcd_to_int(last_sony_subcode->rel_msf[2]); - } else if (schi.cdsc_format == CDROM_LBA) { - schi.cdsc_absaddr.lba = msf_to_log(last_sony_subcode->abs_msf); - schi.cdsc_reladdr.lba = msf_to_log(last_sony_subcode->rel_msf); - } - return copy_to_user(arg, &schi, sizeof schi) ? -EFAULT : 0; -} - - -/* - * The big ugly ioctl handler. - */ -static int -cdu_ioctl(struct inode *inode, - struct file *file, - unsigned int cmd, - unsigned long arg) -{ - Byte status[2]; - Byte cmd_buff[10], params[10]; - int i; - int dsc_status; - void __user *argp = (void __user *)arg; - - if (check_drive_status() != 0) - return -EIO; - - switch (cmd) { - case CDROMSTART: /* Spin up the drive */ - if (spin_up_drive(status) < 0) { - printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMSTART)\n", - status[0]); - return -EIO; - } - return 0; - break; - - case CDROMSTOP: /* Spin down the drive */ - cmd_buff[0] = SONY535_HOLD; - do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0); - - /* - * Spin the drive down, ignoring the error if the disk was - * already not spinning. - */ - sony_audio_status = CDROM_AUDIO_NO_STATUS; - cmd_buff[0] = SONY535_SPIN_DOWN; - dsc_status = do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0); - if (((dsc_status < 0) && (dsc_status != BAD_STATUS)) || - ((status[0] & ~(SONY535_STATUS1_NOT_SPINNING)) != 0)) { - printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMSTOP)\n", - status[0]); - return -EIO; - } - return 0; - break; - - case CDROMPAUSE: /* Pause the drive */ - cmd_buff[0] = SONY535_HOLD; /* CDU-31 driver uses AUDIO_STOP, not pause */ - if (do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0) != 0) { - printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMPAUSE)\n", - status[0]); - return -EIO; - } - /* Get the current position and save it for resuming */ - if (read_subcode() < 0) { - return -EIO; - } - cur_pos_msf[0] = last_sony_subcode->abs_msf[0]; - cur_pos_msf[1] = last_sony_subcode->abs_msf[1]; - cur_pos_msf[2] = last_sony_subcode->abs_msf[2]; - sony_audio_status = CDROM_AUDIO_PAUSED; - return 0; - break; - - case CDROMRESUME: /* Start the drive after being paused */ - set_drive_mode(SONY535_AUDIO_DRIVE_MODE, status); - - if (sony_audio_status != CDROM_AUDIO_PAUSED) { - return -EINVAL; - } - spin_up_drive(status); - - /* Start the drive at the saved position. */ - cmd_buff[0] = SONY535_PLAY_AUDIO; - cmd_buff[1] = 0; /* play back starting at this address */ - cmd_buff[2] = cur_pos_msf[0]; - cmd_buff[3] = cur_pos_msf[1]; - cmd_buff[4] = cur_pos_msf[2]; - cmd_buff[5] = SONY535_PLAY_AUDIO; - cmd_buff[6] = 2; /* set ending address */ - cmd_buff[7] = final_pos_msf[0]; - cmd_buff[8] = final_pos_msf[1]; - cmd_buff[9] = final_pos_msf[2]; - if ((do_sony_cmd(cmd_buff, 5, status, NULL, 0, 0) != 0) || - (do_sony_cmd(cmd_buff + 5, 5, status, NULL, 0, 0) != 0)) { - printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMRESUME)\n", - status[0]); - return -EIO; - } - sony_audio_status = CDROM_AUDIO_PLAY; - return 0; - break; - - case CDROMPLAYMSF: /* Play starting at the given MSF address. */ - if (copy_from_user(params, argp, 6)) - return -EFAULT; - spin_up_drive(status); - set_drive_mode(SONY535_AUDIO_DRIVE_MODE, status); - - /* The parameters are given in int, must be converted */ - for (i = 0; i < 3; i++) { - cmd_buff[2 + i] = int_to_bcd(params[i]); - cmd_buff[7 + i] = int_to_bcd(params[i + 3]); - } - cmd_buff[0] = SONY535_PLAY_AUDIO; - cmd_buff[1] = 0; /* play back starting at this address */ - /* cmd_buff[2-4] are filled in for loop above */ - cmd_buff[5] = SONY535_PLAY_AUDIO; - cmd_buff[6] = 2; /* set ending address */ - /* cmd_buff[7-9] are filled in for loop above */ - if ((do_sony_cmd(cmd_buff, 5, status, NULL, 0, 0) != 0) || - (do_sony_cmd(cmd_buff + 5, 5, status, NULL, 0, 0) != 0)) { - printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMPLAYMSF)\n", - status[0]); - return -EIO; - } - /* Save the final position for pauses and resumes */ - final_pos_msf[0] = cmd_buff[7]; - final_pos_msf[1] = cmd_buff[8]; - final_pos_msf[2] = cmd_buff[9]; - sony_audio_status = CDROM_AUDIO_PLAY; - return 0; - break; - - case CDROMREADTOCHDR: /* Read the table of contents header */ - { - struct cdrom_tochdr __user *hdr = argp; - struct cdrom_tochdr loc_hdr; - - sony_get_toc(); - if (!sony_toc_read) - return -EIO; - loc_hdr.cdth_trk0 = bcd_to_int(sony_toc->first_track_num); - loc_hdr.cdth_trk1 = bcd_to_int(sony_toc->last_track_num); - if (copy_to_user(hdr, &loc_hdr, sizeof *hdr)) - return -EFAULT; - } - return 0; - break; - - case CDROMREADTOCENTRY: /* Read a given table of contents entry */ - { - struct cdrom_tocentry __user *entry = argp; - struct cdrom_tocentry loc_entry; - int track_idx; - Byte *msf_val = NULL; - - sony_get_toc(); - if (!sony_toc_read) { - return -EIO; - } - - if (copy_from_user(&loc_entry, entry, sizeof loc_entry)) - return -EFAULT; - - /* Lead out is handled separately since it is special. */ - if (loc_entry.cdte_track == CDROM_LEADOUT) { - loc_entry.cdte_adr = 0 /*sony_toc->address2 */ ; - loc_entry.cdte_ctrl = sony_toc->control2; - msf_val = sony_toc->lead_out_start_msf; - } else { - track_idx = find_track(int_to_bcd(loc_entry.cdte_track)); - if (track_idx < 0) - return -EINVAL; - loc_entry.cdte_adr = 0 /*sony_toc->tracks[track_idx].address */ ; - loc_entry.cdte_ctrl = sony_toc->tracks[track_idx].control; - msf_val = sony_toc->tracks[track_idx].track_start_msf; - } - - /* Logical buffer address or MSF format requested? */ - if (loc_entry.cdte_format == CDROM_LBA) { - loc_entry.cdte_addr.lba = msf_to_log(msf_val); - } else if (loc_entry.cdte_format == CDROM_MSF) { - loc_entry.cdte_addr.msf.minute = bcd_to_int(*msf_val); - loc_entry.cdte_addr.msf.second = bcd_to_int(*(msf_val + 1)); - loc_entry.cdte_addr.msf.frame = bcd_to_int(*(msf_val + 2)); - } - if (copy_to_user(entry, &loc_entry, sizeof *entry)) - return -EFAULT; - } - return 0; - break; - - case CDROMPLAYTRKIND: /* Play a track. This currently ignores index. */ - { - struct cdrom_ti ti; - int track_idx; - - sony_get_toc(); - if (!sony_toc_read) - return -EIO; - - if (copy_from_user(&ti, argp, sizeof ti)) - return -EFAULT; - if ((ti.cdti_trk0 < sony_toc->first_track_num) - || (sony_toc->last_track_num < ti.cdti_trk0) - || (ti.cdti_trk1 < ti.cdti_trk0)) { - return -EINVAL; - } - track_idx = find_track(int_to_bcd(ti.cdti_trk0)); - if (track_idx < 0) - return -EINVAL; - params[1] = sony_toc->tracks[track_idx].track_start_msf[0]; - params[2] = sony_toc->tracks[track_idx].track_start_msf[1]; - params[3] = sony_toc->tracks[track_idx].track_start_msf[2]; - /* - * If we want to stop after the last track, use the lead-out - * MSF to do that. - */ - if (bcd_to_int(sony_toc->last_track_num) <= ti.cdti_trk1) { - log_to_msf(msf_to_log(sony_toc->lead_out_start_msf) - 1, - &(params[4])); - } else { - track_idx = find_track(int_to_bcd(ti.cdti_trk1 + 1)); - if (track_idx < 0) - return -EINVAL; - log_to_msf(msf_to_log(sony_toc->tracks[track_idx].track_start_msf) - 1, - &(params[4])); - } - params[0] = 0x03; - - spin_up_drive(status); - - set_drive_mode(SONY535_AUDIO_DRIVE_MODE, status); - - /* Start the drive at the saved position. */ - cmd_buff[0] = SONY535_PLAY_AUDIO; - cmd_buff[1] = 0; /* play back starting at this address */ - cmd_buff[2] = params[1]; - cmd_buff[3] = params[2]; - cmd_buff[4] = params[3]; - cmd_buff[5] = SONY535_PLAY_AUDIO; - cmd_buff[6] = 2; /* set ending address */ - cmd_buff[7] = params[4]; - cmd_buff[8] = params[5]; - cmd_buff[9] = params[6]; - if ((do_sony_cmd(cmd_buff, 5, status, NULL, 0, 0) != 0) || - (do_sony_cmd(cmd_buff + 5, 5, status, NULL, 0, 0) != 0)) { - printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMPLAYTRKIND)\n", - status[0]); - printk("... Params: %x %x %x %x %x %x %x\n", - params[0], params[1], params[2], - params[3], params[4], params[5], params[6]); - return -EIO; - } - /* Save the final position for pauses and resumes */ - final_pos_msf[0] = params[4]; - final_pos_msf[1] = params[5]; - final_pos_msf[2] = params[6]; - sony_audio_status = CDROM_AUDIO_PLAY; - return 0; - } - - case CDROMSUBCHNL: /* Get subchannel info */ - return sony_get_subchnl_info(argp); - - case CDROMVOLCTRL: /* Volume control. What volume does this change, anyway? */ - { - struct cdrom_volctrl volctrl; - - if (copy_from_user(&volctrl, argp, sizeof volctrl)) - return -EFAULT; - cmd_buff[0] = SONY535_SET_VOLUME; - cmd_buff[1] = volctrl.channel0; - cmd_buff[2] = volctrl.channel1; - if (do_sony_cmd(cmd_buff, 3, status, NULL, 0, 0) != 0) { - printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMVOLCTRL)\n", - status[0]); - return -EIO; - } - } - return 0; - - case CDROMEJECT: /* Eject the drive */ - cmd_buff[0] = SONY535_STOP; - do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0); - cmd_buff[0] = SONY535_SPIN_DOWN; - do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0); - - sony_audio_status = CDROM_AUDIO_INVALID; - cmd_buff[0] = SONY535_EJECT_CADDY; - if (do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0) != 0) { - printk(CDU535_MESSAGE_NAME " error 0x%.2x (CDROMEJECT)\n", - status[0]); - return -EIO; - } - return 0; - break; - - default: - return -EINVAL; - } -} - - -/* - * Open the drive for operations. Spin the drive up and read the table of - * contents if these have not already been done. - */ -static int -cdu_open(struct inode *inode, - struct file *filp) -{ - Byte status[2], cmd_buff[2]; - - if (sony_inuse) - return -EBUSY; - if (check_drive_status() != 0) - return -EIO; - sony_inuse = 1; - - if (spin_up_drive(status) != 0) { - printk(CDU535_MESSAGE_NAME " error 0x%.2x (cdu_open, spin up)\n", - status[0]); - sony_inuse = 0; - return -EIO; - } - sony_get_toc(); - if (!sony_toc_read) { - cmd_buff[0] = SONY535_SPIN_DOWN; - do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0); - sony_inuse = 0; - return -EIO; - } - check_disk_change(inode->i_bdev); - sony_usage++; - -#ifdef LOCK_DOORS - /* disable the eject button while mounted */ - cmd_buff[0] = SONY535_DISABLE_EJECT_BUTTON; - do_sony_cmd(cmd_buff, 1, status, NULL, 0, 0); -#endif - - return 0; -} - - -/* - * Close the drive. Spin it down if no task is using it. The spin - * down will fail if playing audio, so audio play is OK. - */ -static int -cdu_release(struct inode *inode, - struct file *filp) -{ - Byte status[2], cmd_no; - - sony_inuse = 0; - - if (0 < sony_usage) { - sony_usage--; - } - if (sony_usage == 0) { - check_drive_status(); - - if (sony_audio_status != CDROM_AUDIO_PLAY) { - cmd_no = SONY535_SPIN_DOWN; - do_sony_cmd(&cmd_no, 1, status, NULL, 0, 0); - } -#ifdef LOCK_DOORS - /* enable the eject button after umount */ - cmd_no = SONY535_ENABLE_EJECT_BUTTON; - do_sony_cmd(&cmd_no, 1, status, NULL, 0, 0); -#endif - } - return 0; -} - -static struct block_device_operations cdu_fops = -{ - .owner = THIS_MODULE, - .open = cdu_open, - .release = cdu_release, - .ioctl = cdu_ioctl, - .media_changed = cdu535_check_media_change, -}; - -static struct gendisk *cdu_disk; - -/* - * Initialize the driver. - */ -static int __init sony535_init(void) -{ - struct s535_sony_drive_config drive_config; - Byte cmd_buff[3]; - Byte ret_buff[2]; - Byte status[2]; - unsigned long snap; - int got_result = 0; - int tmp_irq; - int i; - int err; - - /* Setting the base I/O address to 0 will disable it. */ - if ((sony535_cd_base_io == 0xffff)||(sony535_cd_base_io == 0)) - return 0; - - /* Set up all the register locations */ - result_reg = sony535_cd_base_io; - command_reg = sony535_cd_base_io; - data_reg = sony535_cd_base_io + 1; - read_status_reg = sony535_cd_base_io + 2; - select_unit_reg = sony535_cd_base_io + 3; - -#ifndef USE_IRQ - sony535_irq_used = 0; /* polling only until this is ready... */ -#endif - /* we need to poll until things get initialized */ - tmp_irq = sony535_irq_used; - sony535_irq_used = 0; - -#if DEBUG > 0 - printk(KERN_INFO CDU535_MESSAGE_NAME ": probing base address %03X\n", - sony535_cd_base_io); -#endif - /* look for the CD-ROM, follows the procedure in the DOS driver */ - inb(select_unit_reg); - /* wait for 40 18 Hz ticks (reverse-engineered from DOS driver) */ - schedule_timeout_interruptible((HZ+17)*40/18); - inb(result_reg); - - outb(0, read_status_reg); /* does a reset? */ - snap = jiffies; - while (jiffies-snap < SONY_JIFFIES_TIMEOUT) { - select_unit(0); - if (inb(result_reg) != 0xff) { - got_result = 1; - break; - } - sony_sleep(); - } - - if (!got_result || check_drive_status() == TIME_OUT) - goto Enodev; - - /* CD-ROM drive responded -- get the drive configuration */ - cmd_buff[0] = SONY535_INQUIRY; - if (do_sony_cmd(cmd_buff, 1, status, (Byte *)&drive_config, 28, 1) != 0) - goto Enodev; - - /* was able to get the configuration, - * set drive mode as rest of init - */ -#if DEBUG > 0 - /* 0x50 == CADDY_NOT_INSERTED | NOT_SPINNING */ - if ( (status[0] & 0x7f) != 0 && (status[0] & 0x7f) != 0x50 ) - printk(CDU535_MESSAGE_NAME - "Inquiry command returned status = 0x%x\n", status[0]); -#endif - /* now ready to use interrupts, if available */ - sony535_irq_used = tmp_irq; - - /* A negative sony535_irq_used will attempt an autoirq. */ - if (sony535_irq_used < 0) { - unsigned long irq_mask, delay; - - irq_mask = probe_irq_on(); - enable_interrupts(); - outb(0, read_status_reg); /* does a reset? */ - delay = jiffies + HZ/10; - while (time_before(jiffies, delay)) ; - - sony535_irq_used = probe_irq_off(irq_mask); - disable_interrupts(); - } - if (sony535_irq_used > 0) { - if (request_irq(sony535_irq_used, cdu535_interrupt, - IRQF_DISABLED, CDU535_HANDLE, NULL)) { - printk("Unable to grab IRQ%d for the " CDU535_MESSAGE_NAME - " driver; polling instead.\n", sony535_irq_used); - sony535_irq_used = 0; - } - } - cmd_buff[0] = SONY535_SET_DRIVE_MODE; - cmd_buff[1] = 0x0; /* default audio */ - if (do_sony_cmd(cmd_buff, 2, status, ret_buff, 1, 1) != 0) - goto Enodev_irq; - - /* set the drive mode successful, we are set! */ - sony_buffer_size = SONY535_BUFFER_SIZE; - sony_buffer_sectors = sony_buffer_size / CDU535_BLOCK_SIZE; - - printk(KERN_INFO CDU535_MESSAGE_NAME " I/F CDROM : %8.8s %16.16s %4.4s", - drive_config.vendor_id, - drive_config.product_id, - drive_config.product_rev_level); - printk(" base address %03X, ", sony535_cd_base_io); - if (tmp_irq > 0) - printk("IRQ%d, ", tmp_irq); - printk("using %d byte buffer\n", sony_buffer_size); - - if (register_blkdev(MAJOR_NR, CDU535_HANDLE)) { - err = -EIO; - goto out1; - } - sonycd535_queue = blk_init_queue(do_cdu535_request, &sonycd535_lock); - if (!sonycd535_queue) { - err = -ENOMEM; - goto out1a; - } - - blk_queue_hardsect_size(sonycd535_queue, CDU535_BLOCK_SIZE); - sony_toc = kmalloc(sizeof(struct s535_sony_toc), GFP_KERNEL); - err = -ENOMEM; - if (!sony_toc) - goto out2; - last_sony_subcode = kmalloc(sizeof(struct s535_sony_subcode), GFP_KERNEL); - if (!last_sony_subcode) - goto out3; - sony_buffer = kmalloc(sizeof(Byte *) * sony_buffer_sectors, GFP_KERNEL); - if (!sony_buffer) - goto out4; - for (i = 0; i < sony_buffer_sectors; i++) { - sony_buffer[i] = kmalloc(CDU535_BLOCK_SIZE, GFP_KERNEL); - if (!sony_buffer[i]) { - while (--i>=0) - kfree(sony_buffer[i]); - goto out5; - } - } - initialized = 1; - - cdu_disk = alloc_disk(1); - if (!cdu_disk) - goto out6; - cdu_disk->major = MAJOR_NR; - cdu_disk->first_minor = 0; - cdu_disk->fops = &cdu_fops; - sprintf(cdu_disk->disk_name, "cdu"); - - if (!request_region(sony535_cd_base_io, 4, CDU535_HANDLE)) { - printk(KERN_WARNING"sonycd535: Unable to request region 0x%x\n", - sony535_cd_base_io); - goto out7; - } - cdu_disk->queue = sonycd535_queue; - add_disk(cdu_disk); - return 0; - -out7: - put_disk(cdu_disk); -out6: - for (i = 0; i < sony_buffer_sectors; i++) - kfree(sony_buffer[i]); -out5: - kfree(sony_buffer); -out4: - kfree(last_sony_subcode); -out3: - kfree(sony_toc); -out2: - blk_cleanup_queue(sonycd535_queue); -out1a: - unregister_blkdev(MAJOR_NR, CDU535_HANDLE); -out1: - if (sony535_irq_used) - free_irq(sony535_irq_used, NULL); - return err; -Enodev_irq: - if (sony535_irq_used) - free_irq(sony535_irq_used, NULL); -Enodev: - printk("Did not find a " CDU535_MESSAGE_NAME " drive\n"); - return -EIO; -} - -#ifndef MODULE - -/* - * accept "kernel command line" parameters - * (added by emoenke@gwdg.de) - * - * use: tell LILO: - * sonycd535=0x320 - * - * the address value has to be the existing CDROM port address. - */ -static int __init -sonycd535_setup(char *strings) -{ - int ints[3]; - (void)get_options(strings, ARRAY_SIZE(ints), ints); - /* if IRQ change and default io base desired, - * then call with io base of 0 - */ - if (ints[0] > 0) - if (ints[1] != 0) - sony535_cd_base_io = ints[1]; - if (ints[0] > 1) - sony535_irq_used = ints[2]; - if ((strings != NULL) && (*strings != '\0')) - printk(CDU535_MESSAGE_NAME - ": Warning: Unknown interface type: %s\n", strings); - - return 1; -} - -__setup("sonycd535=", sonycd535_setup); - -#endif /* MODULE */ - -static void __exit -sony535_exit(void) -{ - int i; - - release_region(sony535_cd_base_io, 4); - for (i = 0; i < sony_buffer_sectors; i++) - kfree(sony_buffer[i]); - kfree(sony_buffer); - kfree(last_sony_subcode); - kfree(sony_toc); - del_gendisk(cdu_disk); - put_disk(cdu_disk); - blk_cleanup_queue(sonycd535_queue); - if (unregister_blkdev(MAJOR_NR, CDU535_HANDLE) == -EINVAL) - printk("Uh oh, couldn't unregister " CDU535_HANDLE "\n"); - else - printk(KERN_INFO CDU535_HANDLE " module released\n"); -} - -module_init(sony535_init); -module_exit(sony535_exit); - - -MODULE_LICENSE("GPL"); -MODULE_ALIAS_BLOCKDEV_MAJOR(CDU535_CDROM_MAJOR); diff --git a/drivers/cdrom/sonycd535.h b/drivers/cdrom/sonycd535.h deleted file mode 100644 index 5dea1ef168d..00000000000 --- a/drivers/cdrom/sonycd535.h +++ /dev/null @@ -1,183 +0,0 @@ -#ifndef SONYCD535_H -#define SONYCD535_H - -/* - * define all the commands recognized by the CDU-531/5 - */ -#define SONY535_REQUEST_DRIVE_STATUS_1 (0x80) -#define SONY535_REQUEST_SENSE (0x82) -#define SONY535_REQUEST_DRIVE_STATUS_2 (0x84) -#define SONY535_REQUEST_ERROR_STATUS (0x86) -#define SONY535_REQUEST_AUDIO_STATUS (0x88) -#define SONY535_INQUIRY (0x8a) - -#define SONY535_SET_INACTIVITY_TIME (0x90) - -#define SONY535_SEEK_AND_READ_N_BLOCKS_1 (0xa0) -#define SONY535_SEEK_AND_READ_N_BLOCKS_2 (0xa4) -#define SONY535_PLAY_AUDIO (0xa6) - -#define SONY535_REQUEST_DISC_CAPACITY (0xb0) -#define SONY535_REQUEST_TOC_DATA (0xb2) -#define SONY535_REQUEST_SUB_Q_DATA (0xb4) -#define SONY535_REQUEST_ISRC (0xb6) -#define SONY535_REQUEST_UPC_EAN (0xb8) - -#define SONY535_SET_DRIVE_MODE (0xc0) -#define SONY535_REQUEST_DRIVE_MODE (0xc2) -#define SONY535_SET_RETRY_COUNT (0xc4) - -#define SONY535_DIAGNOSTIC_1 (0xc6) -#define SONY535_DIAGNOSTIC_4 (0xcc) -#define SONY535_DIAGNOSTIC_5 (0xce) - -#define SONY535_EJECT_CADDY (0xd0) -#define SONY535_DISABLE_EJECT_BUTTON (0xd2) -#define SONY535_ENABLE_EJECT_BUTTON (0xd4) - -#define SONY535_HOLD (0xe0) -#define SONY535_AUDIO_PAUSE_ON_OFF (0xe2) -#define SONY535_SET_VOLUME (0xe8) - -#define SONY535_STOP (0xf0) -#define SONY535_SPIN_UP (0xf2) -#define SONY535_SPIN_DOWN (0xf4) - -#define SONY535_CLEAR_PARAMETERS (0xf6) -#define SONY535_CLEAR_ENDING_ADDRESS (0xf8) - -/* - * define some masks - */ -#define SONY535_DATA_NOT_READY_BIT (0x1) -#define SONY535_RESULT_NOT_READY_BIT (0x2) - -/* - * drive status 1 - */ -#define SONY535_STATUS1_COMMAND_ERROR (0x1) -#define SONY535_STATUS1_DATA_ERROR (0x2) -#define SONY535_STATUS1_SEEK_ERROR (0x4) -#define SONY535_STATUS1_DISC_TYPE_ERROR (0x8) -#define SONY535_STATUS1_NOT_SPINNING (0x10) -#define SONY535_STATUS1_EJECT_BUTTON_PRESSED (0x20) -#define SONY535_STATUS1_CADDY_NOT_INSERTED (0x40) -#define SONY535_STATUS1_BYTE_TWO_FOLLOWS (0x80) - -/* - * drive status 2 - */ -#define SONY535_CDD_LOADING_ERROR (0x7) -#define SONY535_CDD_NO_DISC (0x8) -#define SONY535_CDD_UNLOADING_ERROR (0x9) -#define SONY535_CDD_CADDY_NOT_INSERTED (0xd) -#define SONY535_ATN_RESET_OCCURRED (0x2) -#define SONY535_ATN_DISC_CHANGED (0x4) -#define SONY535_ATN_RESET_AND_DISC_CHANGED (0x6) -#define SONY535_ATN_EJECT_IN_PROGRESS (0xe) -#define SONY535_ATN_BUSY (0xf) - -/* - * define some parameters - */ -#define SONY535_AUDIO_DRIVE_MODE (0) -#define SONY535_CDROM_DRIVE_MODE (0xe0) - -#define SONY535_PLAY_OP_PLAYBACK (0) -#define SONY535_PLAY_OP_ENTER_HOLD (1) -#define SONY535_PLAY_OP_SET_AUDIO_ENDING_ADDR (2) -#define SONY535_PLAY_OP_SCAN_FORWARD (3) -#define SONY535_PLAY_OP_SCAN_BACKWARD (4) - -/* - * convert from msf format to block number - */ -#define SONY_BLOCK_NUMBER(m,s,f) (((m)*60L+(s))*75L+(f)) -#define SONY_BLOCK_NUMBER_MSF(x) (((x)[0]*60L+(x)[1])*75L+(x)[2]) - -/* - * error return values from the doSonyCmd() routines - */ -#define TIME_OUT (-1) -#define NO_CDROM (-2) -#define BAD_STATUS (-3) -#define CD_BUSY (-4) -#define NOT_DATA_CD (-5) -#define NO_ROOM (-6) - -#define LOG_START_OFFSET 150 /* Offset of first logical sector */ - -#define SONY_JIFFIES_TIMEOUT (5*HZ) /* Maximum time - the drive will wait/try for an - operation */ -#define SONY_READY_RETRIES (50000) /* How many times to retry a - spin waiting for a register - to come ready */ -#define SONY535_FAST_POLLS (10000) /* how many times recheck - status waiting for a data - to become ready */ - -typedef unsigned char Byte; - -/* - * This is the complete status returned from the drive configuration request - * command. - */ -struct s535_sony_drive_config -{ - char vendor_id[8]; - char product_id[16]; - char product_rev_level[4]; -}; - -/* The following is returned from the request sub-q data command */ -struct s535_sony_subcode -{ - unsigned char address :4; - unsigned char control :4; - unsigned char track_num; - unsigned char index_num; - unsigned char rel_msf[3]; - unsigned char abs_msf[3]; -}; - -struct s535_sony_disc_capacity -{ - Byte mFirstTrack, sFirstTrack, fFirstTrack; - Byte mLeadOut, sLeadOut, fLeadOut; -}; - -/* - * The following is returned from the request TOC (Table Of Contents) command. - * (last_track_num-first_track_num+1) values are valid in tracks. - */ -struct s535_sony_toc -{ - unsigned char reserved0 :4; - unsigned char control0 :4; - unsigned char point0; - unsigned char first_track_num; - unsigned char reserved0a; - unsigned char reserved0b; - unsigned char reserved1 :4; - unsigned char control1 :4; - unsigned char point1; - unsigned char last_track_num; - unsigned char dummy1; - unsigned char dummy2; - unsigned char reserved2 :4; - unsigned char control2 :4; - unsigned char point2; - unsigned char lead_out_start_msf[3]; - struct - { - unsigned char reserved :4; - unsigned char control :4; - unsigned char track; - unsigned char track_start_msf[3]; - } tracks[100]; - - unsigned int lead_out_start_lba; -}; - -#endif /* SONYCD535_H */ diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index 1b094509b1d..90965b4def5 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -1005,8 +1005,8 @@ static const unsigned short x86_keycodes[256] = 284,285,309, 0,312, 91,327,328,329,331,333,335,336,337,338,339, 367,288,302,304,350, 89,334,326,267,126,268,269,125,347,348,349, 360,261,262,263,268,376,100,101,321,316,373,286,289,102,351,355, - 103,104,105,275,287,279,306,106,274,107,294,364,358,363,362,361, - 291,108,381,281,290,272,292,305,280, 99,112,257,258,359,113,114, + 103,104,105,275,287,279,258,106,274,107,294,364,358,363,362,361, + 291,108,381,281,290,272,292,305,280, 99,112,257,306,359,113,114, 264,117,271,374,379,265,266, 93, 94, 95, 85,259,375,260, 90,116, 377,109,111,277,278,282,283,295,296,297,299,300,301,293,303,307, 308,310,313,314,315,317,318,319,320,357,322,323,324,325,276,330, diff --git a/drivers/char/mem.c b/drivers/char/mem.c index cc9a9d0df97..d2e4cfd79f2 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -24,7 +24,7 @@ #include <linux/crash_dump.h> #include <linux/backing-dev.h> #include <linux/bootmem.h> -#include <linux/pipe_fs_i.h> +#include <linux/splice.h> #include <linux/pfn.h> #include <asm/uaccess.h> diff --git a/drivers/ide/legacy/hd.c b/drivers/ide/legacy/hd.c index 661c12f6dda..7f4c0a5050a 100644 --- a/drivers/ide/legacy/hd.c +++ b/drivers/ide/legacy/hd.c @@ -623,7 +623,8 @@ repeat: cyl = track / disk->head; #ifdef DEBUG printk("%s: %sing: CHS=%d/%d/%d, sectors=%d, buffer=%p\n", - req->rq_disk->disk_name, (req->cmd == READ)?"read":"writ", + req->rq_disk->disk_name, + req_data_dir(req) == READ ? "read" : "writ", cyl, head, sec, nsect, req->buffer); #endif if (blk_fs_request(req)) { diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index be6b93c20f6..ab4b2d9b532 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -30,6 +30,7 @@ struct evdev { wait_queue_head_t wait; struct evdev_client *grab; struct list_head client_list; + struct device dev; }; struct evdev_client { @@ -94,8 +95,10 @@ static int evdev_flush(struct file *file, fl_owner_t id) return input_flush_device(&evdev->handle, file); } -static void evdev_free(struct evdev *evdev) +static void evdev_free(struct device *dev) { + struct evdev *evdev = container_of(dev, struct evdev, dev); + evdev_table[evdev->minor] = NULL; kfree(evdev); } @@ -114,12 +117,10 @@ static int evdev_release(struct inode *inode, struct file *file) list_del(&client->node); kfree(client); - if (!--evdev->open) { - if (evdev->exist) - input_close_device(&evdev->handle); - else - evdev_free(evdev); - } + if (!--evdev->open && evdev->exist) + input_close_device(&evdev->handle); + + put_device(&evdev->dev); return 0; } @@ -139,24 +140,32 @@ static int evdev_open(struct inode *inode, struct file *file) if (!evdev || !evdev->exist) return -ENODEV; + get_device(&evdev->dev); + client = kzalloc(sizeof(struct evdev_client), GFP_KERNEL); - if (!client) - return -ENOMEM; + if (!client) { + error = -ENOMEM; + goto err_put_evdev; + } client->evdev = evdev; list_add_tail(&client->node, &evdev->client_list); if (!evdev->open++ && evdev->exist) { error = input_open_device(&evdev->handle); - if (error) { - list_del(&client->node); - kfree(client); - return error; - } + if (error) + goto err_free_client; } file->private_data = client; return 0; + + err_free_client: + list_del(&client->node); + kfree(client); + err_put_evdev: + put_device(&evdev->dev); + return error; } #ifdef CONFIG_COMPAT @@ -625,8 +634,6 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id) { struct evdev *evdev; - struct class_device *cdev; - dev_t devt; int minor; int error; @@ -649,38 +656,32 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev, evdev->handle.name = evdev->name; evdev->handle.handler = handler; evdev->handle.private = evdev; - sprintf(evdev->name, "event%d", minor); - - evdev_table[minor] = evdev; + snprintf(evdev->name, sizeof(evdev->name), "event%d", minor); - devt = MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor), + snprintf(evdev->dev.bus_id, sizeof(evdev->dev.bus_id), + "event%d", minor); + evdev->dev.class = &input_class; + evdev->dev.parent = &dev->dev; + evdev->dev.devt = MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor); + evdev->dev.release = evdev_free; + device_initialize(&evdev->dev); - cdev = class_device_create(&input_class, &dev->cdev, devt, - dev->cdev.dev, evdev->name); - if (IS_ERR(cdev)) { - error = PTR_ERR(cdev); - goto err_free_evdev; - } + evdev_table[minor] = evdev; - /* temporary symlink to keep userspace happy */ - error = sysfs_create_link(&input_class.subsys.kobj, - &cdev->kobj, evdev->name); + error = device_add(&evdev->dev); if (error) - goto err_cdev_destroy; + goto err_free_evdev; error = input_register_handle(&evdev->handle); if (error) - goto err_remove_link; + goto err_delete_evdev; return 0; - err_remove_link: - sysfs_remove_link(&input_class.subsys.kobj, evdev->name); - err_cdev_destroy: - class_device_destroy(&input_class, devt); + err_delete_evdev: + device_del(&evdev->dev); err_free_evdev: - kfree(evdev); - evdev_table[minor] = NULL; + put_device(&evdev->dev); return error; } @@ -690,10 +691,8 @@ static void evdev_disconnect(struct input_handle *handle) struct evdev_client *client; input_unregister_handle(handle); + device_del(&evdev->dev); - sysfs_remove_link(&input_class.subsys.kobj, evdev->name); - class_device_destroy(&input_class, - MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + evdev->minor)); evdev->exist = 0; if (evdev->open) { @@ -702,8 +701,9 @@ static void evdev_disconnect(struct input_handle *handle) list_for_each_entry(client, &evdev->client_list, node) kill_fasync(&client->fasync, SIGIO, POLL_HUP); wake_up_interruptible(&evdev->wait); - } else - evdev_free(evdev); + } + + put_device(&evdev->dev); } static const struct input_device_id evdev_ids[] = { diff --git a/drivers/input/input.c b/drivers/input/input.c index ccd8abafcb7..75b4d2a83dd 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -442,7 +442,7 @@ static int input_attach_handler(struct input_dev *dev, struct input_handler *han printk(KERN_ERR "input: failed to attach handler %s to device %s, " "error: %d\n", - handler->name, kobject_name(&dev->cdev.kobj), error); + handler->name, kobject_name(&dev->dev.kobj), error); return error; } @@ -527,7 +527,7 @@ static void input_seq_print_bitmap(struct seq_file *seq, const char *name, static int input_devices_seq_show(struct seq_file *seq, void *v) { struct input_dev *dev = container_of(v, struct input_dev, node); - const char *path = kobject_get_path(&dev->cdev.kobj, GFP_KERNEL); + const char *path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL); struct input_handle *handle; seq_printf(seq, "I: Bus=%04x Vendor=%04x Product=%04x Version=%04x\n", @@ -682,15 +682,17 @@ static inline int input_proc_init(void) { return 0; } static inline void input_proc_exit(void) { } #endif -#define INPUT_DEV_STRING_ATTR_SHOW(name) \ -static ssize_t input_dev_show_##name(struct class_device *dev, char *buf) \ -{ \ - struct input_dev *input_dev = to_input_dev(dev); \ - \ - return scnprintf(buf, PAGE_SIZE, "%s\n", \ - input_dev->name ? input_dev->name : ""); \ -} \ -static CLASS_DEVICE_ATTR(name, S_IRUGO, input_dev_show_##name, NULL); +#define INPUT_DEV_STRING_ATTR_SHOW(name) \ +static ssize_t input_dev_show_##name(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct input_dev *input_dev = to_input_dev(dev); \ + \ + return scnprintf(buf, PAGE_SIZE, "%s\n", \ + input_dev->name ? input_dev->name : ""); \ +} \ +static DEVICE_ATTR(name, S_IRUGO, input_dev_show_##name, NULL) INPUT_DEV_STRING_ATTR_SHOW(name); INPUT_DEV_STRING_ATTR_SHOW(phys); @@ -744,7 +746,9 @@ static int input_print_modalias(char *buf, int size, struct input_dev *id, return len; } -static ssize_t input_dev_show_modalias(struct class_device *dev, char *buf) +static ssize_t input_dev_show_modalias(struct device *dev, + struct device_attribute *attr, + char *buf) { struct input_dev *id = to_input_dev(dev); ssize_t len; @@ -753,13 +757,13 @@ static ssize_t input_dev_show_modalias(struct class_device *dev, char *buf) return min_t(int, len, PAGE_SIZE); } -static CLASS_DEVICE_ATTR(modalias, S_IRUGO, input_dev_show_modalias, NULL); +static DEVICE_ATTR(modalias, S_IRUGO, input_dev_show_modalias, NULL); static struct attribute *input_dev_attrs[] = { - &class_device_attr_name.attr, - &class_device_attr_phys.attr, - &class_device_attr_uniq.attr, - &class_device_attr_modalias.attr, + &dev_attr_name.attr, + &dev_attr_phys.attr, + &dev_attr_uniq.attr, + &dev_attr_modalias.attr, NULL }; @@ -767,13 +771,15 @@ static struct attribute_group input_dev_attr_group = { .attrs = input_dev_attrs, }; -#define INPUT_DEV_ID_ATTR(name) \ -static ssize_t input_dev_show_id_##name(struct class_device *dev, char *buf) \ -{ \ - struct input_dev *input_dev = to_input_dev(dev); \ - return scnprintf(buf, PAGE_SIZE, "%04x\n", input_dev->id.name); \ -} \ -static CLASS_DEVICE_ATTR(name, S_IRUGO, input_dev_show_id_##name, NULL); +#define INPUT_DEV_ID_ATTR(name) \ +static ssize_t input_dev_show_id_##name(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct input_dev *input_dev = to_input_dev(dev); \ + return scnprintf(buf, PAGE_SIZE, "%04x\n", input_dev->id.name); \ +} \ +static DEVICE_ATTR(name, S_IRUGO, input_dev_show_id_##name, NULL) INPUT_DEV_ID_ATTR(bustype); INPUT_DEV_ID_ATTR(vendor); @@ -781,10 +787,10 @@ INPUT_DEV_ID_ATTR(product); INPUT_DEV_ID_ATTR(version); static struct attribute *input_dev_id_attrs[] = { - &class_device_attr_bustype.attr, - &class_device_attr_vendor.attr, - &class_device_attr_product.attr, - &class_device_attr_version.attr, + &dev_attr_bustype.attr, + &dev_attr_vendor.attr, + &dev_attr_product.attr, + &dev_attr_version.attr, NULL }; @@ -813,15 +819,17 @@ static int input_print_bitmap(char *buf, int buf_size, unsigned long *bitmap, return len; } -#define INPUT_DEV_CAP_ATTR(ev, bm) \ -static ssize_t input_dev_show_cap_##bm(struct class_device *dev, char *buf) \ -{ \ - struct input_dev *input_dev = to_input_dev(dev); \ - int len = input_print_bitmap(buf, PAGE_SIZE, \ - input_dev->bm##bit, ev##_MAX, 1); \ - return min_t(int, len, PAGE_SIZE); \ -} \ -static CLASS_DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL); +#define INPUT_DEV_CAP_ATTR(ev, bm) \ +static ssize_t input_dev_show_cap_##bm(struct device *dev, \ + struct device_attribute *attr, \ + char *buf) \ +{ \ + struct input_dev *input_dev = to_input_dev(dev); \ + int len = input_print_bitmap(buf, PAGE_SIZE, \ + input_dev->bm##bit, ev##_MAX, 1); \ + return min_t(int, len, PAGE_SIZE); \ +} \ +static DEVICE_ATTR(bm, S_IRUGO, input_dev_show_cap_##bm, NULL) INPUT_DEV_CAP_ATTR(EV, ev); INPUT_DEV_CAP_ATTR(KEY, key); @@ -834,15 +842,15 @@ INPUT_DEV_CAP_ATTR(FF, ff); INPUT_DEV_CAP_ATTR(SW, sw); static struct attribute *input_dev_caps_attrs[] = { - &class_device_attr_ev.attr, - &class_device_attr_key.attr, - &class_device_attr_rel.attr, - &class_device_attr_abs.attr, - &class_device_attr_msc.attr, - &class_device_attr_led.attr, - &class_device_attr_snd.attr, - &class_device_attr_ff.attr, - &class_device_attr_sw.attr, + &dev_attr_ev.attr, + &dev_attr_key.attr, + &dev_attr_rel.attr, + &dev_attr_abs.attr, + &dev_attr_msc.attr, + &dev_attr_led.attr, + &dev_attr_snd.attr, + &dev_attr_ff.attr, + &dev_attr_sw.attr, NULL }; @@ -858,9 +866,9 @@ static struct attribute_group *input_dev_attr_groups[] = { NULL }; -static void input_dev_release(struct class_device *class_dev) +static void input_dev_release(struct device *device) { - struct input_dev *dev = to_input_dev(class_dev); + struct input_dev *dev = to_input_dev(device); input_ff_destroy(dev); kfree(dev); @@ -947,10 +955,10 @@ static int input_add_uevent_modalias_var(char **envp, int num_envp, int *cur_ind return err; \ } while (0) -static int input_dev_uevent(struct class_device *cdev, char **envp, +static int input_dev_uevent(struct device *device, char **envp, int num_envp, char *buffer, int buffer_size) { - struct input_dev *dev = to_input_dev(cdev); + struct input_dev *dev = to_input_dev(device); int i = 0; int len = 0; @@ -988,10 +996,14 @@ static int input_dev_uevent(struct class_device *cdev, char **envp, return 0; } +static struct device_type input_dev_type = { + .groups = input_dev_attr_groups, + .release = input_dev_release, + .uevent = input_dev_uevent, +}; + struct class input_class = { - .name = "input", - .release = input_dev_release, - .uevent = input_dev_uevent, + .name = "input", }; EXPORT_SYMBOL_GPL(input_class); @@ -1010,9 +1022,9 @@ struct input_dev *input_allocate_device(void) dev = kzalloc(sizeof(struct input_dev), GFP_KERNEL); if (dev) { - dev->cdev.class = &input_class; - dev->cdev.groups = input_dev_attr_groups; - class_device_initialize(&dev->cdev); + dev->dev.type = &input_dev_type; + dev->dev.class = &input_class; + device_initialize(&dev->dev); mutex_init(&dev->mutex); INIT_LIST_HEAD(&dev->h_list); INIT_LIST_HEAD(&dev->node); @@ -1131,17 +1143,17 @@ int input_register_device(struct input_dev *dev) list_add_tail(&dev->node, &input_dev_list); - snprintf(dev->cdev.class_id, sizeof(dev->cdev.class_id), + snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id), "input%ld", (unsigned long) atomic_inc_return(&input_no) - 1); - if (!dev->cdev.dev) - dev->cdev.dev = dev->dev.parent; + if (dev->cdev.dev) + dev->dev.parent = dev->cdev.dev; - error = class_device_add(&dev->cdev); + error = device_add(&dev->dev); if (error) return error; - path = kobject_get_path(&dev->cdev.kobj, GFP_KERNEL); + path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL); printk(KERN_INFO "input: %s as %s\n", dev->name ? dev->name : "Unspecified device", path ? path : "N/A"); kfree(path); @@ -1173,7 +1185,7 @@ void input_unregister_device(struct input_dev *dev) list_del_init(&dev->node); - class_device_unregister(&dev->cdev); + device_unregister(&dev->dev); input_wakeup_procfs_readers(); } diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 10e3b7bc925..a9a0180bfd4 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -43,6 +43,8 @@ struct joydev { struct input_handle handle; wait_queue_head_t wait; struct list_head client_list; + struct device dev; + struct js_corr corr[ABS_MAX + 1]; struct JS_DATA_SAVE_TYPE glue; int nabs; @@ -138,8 +140,10 @@ static int joydev_fasync(int fd, struct file *file, int on) return retval < 0 ? retval : 0; } -static void joydev_free(struct joydev *joydev) +static void joydev_free(struct device *dev) { + struct joydev *joydev = container_of(dev, struct joydev, dev); + joydev_table[joydev->minor] = NULL; kfree(joydev); } @@ -154,12 +158,10 @@ static int joydev_release(struct inode *inode, struct file *file) list_del(&client->node); kfree(client); - if (!--joydev->open) { - if (joydev->exist) - input_close_device(&joydev->handle); - else - joydev_free(joydev); - } + if (!--joydev->open && joydev->exist) + input_close_device(&joydev->handle); + + put_device(&joydev->dev); return 0; } @@ -178,24 +180,32 @@ static int joydev_open(struct inode *inode, struct file *file) if (!joydev || !joydev->exist) return -ENODEV; + get_device(&joydev->dev); + client = kzalloc(sizeof(struct joydev_client), GFP_KERNEL); - if (!client) - return -ENOMEM; + if (!client) { + error = -ENOMEM; + goto err_put_joydev; + } client->joydev = joydev; list_add_tail(&client->node, &joydev->client_list); if (!joydev->open++ && joydev->exist) { error = input_open_device(&joydev->handle); - if (error) { - list_del(&client->node); - kfree(client); - return error; - } + if (error) + goto err_free_client; } file->private_data = client; return 0; + + err_free_client: + list_del(&client->node); + kfree(client); + err_put_joydev: + put_device(&joydev->dev); + return error; } static ssize_t joydev_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) @@ -481,8 +491,6 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id) { struct joydev *joydev; - struct class_device *cdev; - dev_t devt; int i, j, t, minor; int error; @@ -505,7 +513,7 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev, joydev->handle.name = joydev->name; joydev->handle.handler = handler; joydev->handle.private = joydev; - sprintf(joydev->name, "js%d", minor); + snprintf(joydev->name, sizeof(joydev->name), "js%d", minor); for (i = 0; i < ABS_MAX + 1; i++) if (test_bit(i, dev->absbit)) { @@ -547,36 +555,30 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev, joydev->abs[i] = joydev_correct(dev->abs[j], joydev->corr + i); } - joydev_table[minor] = joydev; - - devt = MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor), + snprintf(joydev->dev.bus_id, sizeof(joydev->dev.bus_id), + "js%d", minor); + joydev->dev.class = &input_class; + joydev->dev.parent = &dev->dev; + joydev->dev.devt = MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + minor); + joydev->dev.release = joydev_free; + device_initialize(&joydev->dev); - cdev = class_device_create(&input_class, &dev->cdev, devt, - dev->cdev.dev, joydev->name); - if (IS_ERR(cdev)) { - error = PTR_ERR(cdev); - goto err_free_joydev; - } + joydev_table[minor] = joydev; - /* temporary symlink to keep userspace happy */ - error = sysfs_create_link(&input_class.subsys.kobj, - &cdev->kobj, joydev->name); + error = device_add(&joydev->dev); if (error) - goto err_cdev_destroy; + goto err_free_joydev; error = input_register_handle(&joydev->handle); if (error) - goto err_remove_link; + goto err_delete_joydev; return 0; - err_remove_link: - sysfs_remove_link(&input_class.subsys.kobj, joydev->name); - err_cdev_destroy: - class_device_destroy(&input_class, devt); + err_delete_joydev: + device_del(&joydev->dev); err_free_joydev: - joydev_table[minor] = NULL; - kfree(joydev); + put_device(&joydev->dev); return error; } @@ -587,9 +589,8 @@ static void joydev_disconnect(struct input_handle *handle) struct joydev_client *client; input_unregister_handle(handle); + device_del(&joydev->dev); - sysfs_remove_link(&input_class.subsys.kobj, joydev->name); - class_device_destroy(&input_class, MKDEV(INPUT_MAJOR, JOYDEV_MINOR_BASE + joydev->minor)); joydev->exist = 0; if (joydev->open) { @@ -597,8 +598,9 @@ static void joydev_disconnect(struct input_handle *handle) list_for_each_entry(client, &joydev->client_list, node) kill_fasync(&client->fasync, SIGIO, POLL_HUP); wake_up_interruptible(&joydev->wait); - } else - joydev_free(joydev); + } + + put_device(&joydev->dev); } static const struct input_device_id joydev_blacklist[] = { diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index b0023452ec9..12db72d83ea 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -268,4 +268,11 @@ config JOYSTICK_XPAD To compile this driver as a module, choose M here: the module will be called xpad. +config JOYSTICK_XPAD_FF + bool "X-Box gamepad rumble support" + depends on JOYSTICK_XPAD && INPUT + select INPUT_FF_MEMLESS + ---help--- + Say Y here if you want to take advantage of xbox 360 rumble features. + endif diff --git a/drivers/input/joystick/grip_mp.c b/drivers/input/joystick/grip_mp.c index 555319e6378..4ed3a3eadf1 100644 --- a/drivers/input/joystick/grip_mp.c +++ b/drivers/input/joystick/grip_mp.c @@ -320,10 +320,10 @@ static int multiport_io(struct gameport* gameport, int sendflags, int sendcode, static int dig_mode_start(struct gameport *gameport, u32 *packet) { - int i, seq_len = sizeof(init_seq)/sizeof(int); + int i; int flags, tries = 0, bads = 0; - for (i = 0; i < seq_len; i++) { /* Send magic sequence */ + for (i = 0; i < ARRAY_SIZE(init_seq); i++) { /* Send magic sequence */ if (init_seq[i]) gameport_trigger(gameport); udelay(GRIP_INIT_DELAY); diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 8c8cd95a698..244089c5265 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -8,6 +8,7 @@ * Ivan Hawkes <blackhawk@ivanhawkes.com> * 2005 Dominic Cerquetti <binary1230@yahoo.com> * 2006 Adam Buchbinder <adam.buchbinder@gmail.com> + * 2007 Jan Kratochvil <honza@jikos.cz> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -28,6 +29,7 @@ * - information from http://euc.jp/periphs/xbox-controller.ja.html * - the iForce driver drivers/char/joystick/iforce.c * - the skeleton-driver drivers/usb/usb-skeleton.c + * - Xbox 360 information http://www.free60.org/wiki/Gamepad * * Thanks to: * - ITO Takayuki for providing essential xpad information on his website @@ -88,6 +90,9 @@ #define MAP_DPAD_TO_AXES 1 #define MAP_DPAD_UNKNOWN -1 +#define XTYPE_XBOX 0 +#define XTYPE_XBOX360 1 + static int dpad_to_buttons; module_param(dpad_to_buttons, bool, S_IRUGO); MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads"); @@ -97,40 +102,42 @@ static const struct xpad_device { u16 idProduct; char *name; u8 dpad_mapping; + u8 xtype; } xpad_device[] = { - { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES }, - { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES }, - { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES }, - { 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES }, - { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS }, - { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES }, - { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES }, - { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES }, - { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES }, - { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES }, - { 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES }, - { 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES }, - { 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES }, - { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES }, - { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS }, - { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES }, - { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS }, - { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES }, - { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES }, - { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES }, - { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES }, - { 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES}, - { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES }, - { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES }, - { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES }, - { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES }, - { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES }, - { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES }, - { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES }, - { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS }, - { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS }, - { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES }, - { 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN } + { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, + { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, + { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, + { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, + { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, + { 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 }, + { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN, XTYPE_XBOX } }; static const signed short xpad_btn[] = { @@ -146,6 +153,12 @@ static const signed short xpad_btn_pad[] = { -1 /* terminating entry */ }; +static const signed short xpad360_btn[] = { /* buttons for x360 controller */ + BTN_TL, BTN_TR, /* Button LB/RB */ + BTN_MODE, /* The big X button */ + -1 +}; + static const signed short xpad_abs[] = { ABS_X, ABS_Y, /* left stick */ ABS_RX, ABS_RY, /* right stick */ @@ -159,8 +172,12 @@ static const signed short xpad_abs_pad[] = { -1 /* terminating entry */ }; +/* Xbox 360 has a vendor-specific (sub)class, so we cannot match it with only + * USB_INTERFACE_INFO, more to that this device has 4 InterfaceProtocols, + * but we need only one of them. */ static struct usb_device_id xpad_table [] = { { USB_INTERFACE_INFO('X', 'B', 0) }, /* X-Box USB-IF not approved class */ + { USB_DEVICE_INTERFACE_PROTOCOL(0x045e, 0x028e, 1) }, /* X-Box 360 controller */ { } }; @@ -174,9 +191,16 @@ struct usb_xpad { unsigned char *idata; /* input data */ dma_addr_t idata_dma; +#ifdef CONFIG_JOYSTICK_XPAD_FF + struct urb *irq_out; /* urb for interrupt out report */ + unsigned char *odata; /* output data */ + dma_addr_t odata_dma; +#endif + char phys[65]; /* physical device path */ int dpad_mapping; /* map d-pad to buttons or to axes */ + int xtype; /* type of xbox device */ }; /* @@ -212,8 +236,8 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d } else /* xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS */ { input_report_key(dev, BTN_LEFT, data[2] & 0x04); input_report_key(dev, BTN_RIGHT, data[2] & 0x08); - input_report_key(dev, BTN_0, data[2] & 0x01); // up - input_report_key(dev, BTN_1, data[2] & 0x02); // down + input_report_key(dev, BTN_0, data[2] & 0x01); /* up */ + input_report_key(dev, BTN_1, data[2] & 0x02); /* down */ } /* start/back buttons and stick press left/right */ @@ -235,6 +259,64 @@ static void xpad_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *d input_sync(dev); } +/* + * xpad360_process_packet + * + * Completes a request by converting the data into events for the + * input subsystem. It is version for xbox 360 controller + * + * The used report descriptor was taken from: + * http://www.free60.org/wiki/Gamepad + */ + +static void xpad360_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data) +{ + struct input_dev *dev = xpad->dev; + + /* digital pad */ + if (xpad->dpad_mapping == MAP_DPAD_TO_AXES) { + input_report_abs(dev, ABS_HAT0X, !!(data[2] & 0x08) - !!(data[2] & 0x04)); + input_report_abs(dev, ABS_HAT0Y, !!(data[2] & 0x02) - !!(data[2] & 0x01)); + } else if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS) { + /* dpad as buttons (right, left, down, up) */ + input_report_key(dev, BTN_LEFT, data[2] & 0x04); + input_report_key(dev, BTN_RIGHT, data[2] & 0x08); + input_report_key(dev, BTN_0, data[2] & 0x01); /* up */ + input_report_key(dev, BTN_1, data[2] & 0x02); /* down */ + } + + /* start/back buttons */ + input_report_key(dev, BTN_START, data[2] & 0x10); + input_report_key(dev, BTN_BACK, data[2] & 0x20); + + /* stick press left/right */ + input_report_key(dev, BTN_THUMBL, data[2] & 0x40); + input_report_key(dev, BTN_THUMBR, data[2] & 0x80); + + /* buttons A,B,X,Y,TL,TR and MODE */ + input_report_key(dev, BTN_A, data[3] & 0x10); + input_report_key(dev, BTN_B, data[3] & 0x20); + input_report_key(dev, BTN_X, data[3] & 0x40); + input_report_key(dev, BTN_Y, data[3] & 0x80); + input_report_key(dev, BTN_TL, data[3] & 0x01); + input_report_key(dev, BTN_TR, data[3] & 0x02); + input_report_key(dev, BTN_MODE, data[3] & 0x04); + + /* left stick */ + input_report_abs(dev, ABS_X, (__s16) (((__s16)data[7] << 8) | (__s16)data[6])); + input_report_abs(dev, ABS_Y, (__s16) (((__s16)data[9] << 8) | (__s16)data[8])); + + /* right stick */ + input_report_abs(dev, ABS_RX, (__s16) (((__s16)data[11] << 8) | (__s16)data[10])); + input_report_abs(dev, ABS_RY, (__s16) (((__s16)data[13] << 8) | (__s16)data[12])); + + /* triggers left/right */ + input_report_abs(dev, ABS_Z, data[4]); + input_report_abs(dev, ABS_RZ, data[5]); + + input_sync(dev); +} + static void xpad_irq_in(struct urb *urb) { struct usb_xpad *xpad = urb->context; @@ -255,7 +337,10 @@ static void xpad_irq_in(struct urb *urb) goto exit; } - xpad_process_packet(xpad, 0, xpad->idata); + if (xpad->xtype == XTYPE_XBOX360) + xpad360_process_packet(xpad, 0, xpad->idata); + else + xpad_process_packet(xpad, 0, xpad->idata); exit: retval = usb_submit_urb (urb, GFP_ATOMIC); @@ -264,7 +349,114 @@ exit: __FUNCTION__, retval); } -static int xpad_open (struct input_dev *dev) +#ifdef CONFIG_JOYSTICK_XPAD_FF +static void xpad_irq_out(struct urb *urb) +{ + int retval; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status); + goto exit; + } + +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + err("%s - usb_submit_urb failed with result %d", + __FUNCTION__, retval); +} + +static int xpad_play_effect(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct usb_xpad *xpad = input_get_drvdata(dev); + + if (effect->type == FF_RUMBLE) { + __u16 strong = effect->u.rumble.strong_magnitude; + __u16 weak = effect->u.rumble.weak_magnitude; + xpad->odata[0] = 0x00; + xpad->odata[1] = 0x08; + xpad->odata[2] = 0x00; + xpad->odata[3] = strong / 256; + xpad->odata[4] = weak / 256; + xpad->odata[5] = 0x00; + xpad->odata[6] = 0x00; + xpad->odata[7] = 0x00; + usb_submit_urb(xpad->irq_out, GFP_KERNEL); + } + + return 0; +} + +static int xpad_init_ff(struct usb_interface *intf, struct usb_xpad *xpad) +{ + struct usb_endpoint_descriptor *ep_irq_out; + int error = -ENOMEM; + + if (xpad->xtype != XTYPE_XBOX360) + return 0; + + xpad->odata = usb_buffer_alloc(xpad->udev, XPAD_PKT_LEN, + GFP_ATOMIC, &xpad->odata_dma ); + if (!xpad->odata) + goto fail1; + + xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL); + if (!xpad->irq_out) + goto fail2; + + ep_irq_out = &intf->cur_altsetting->endpoint[1].desc; + usb_fill_int_urb(xpad->irq_out, xpad->udev, + usb_sndintpipe(xpad->udev, ep_irq_out->bEndpointAddress), + xpad->odata, XPAD_PKT_LEN, + xpad_irq_out, xpad, ep_irq_out->bInterval); + xpad->irq_out->transfer_dma = xpad->odata_dma; + xpad->irq_out->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + input_set_capability(xpad->dev, EV_FF, FF_RUMBLE); + + error = input_ff_create_memless(xpad->dev, NULL, xpad_play_effect); + if (error) + goto fail2; + + return 0; + + fail2: usb_buffer_free(xpad->udev, XPAD_PKT_LEN, xpad->odata, xpad->odata_dma); + fail1: return error; +} + +static void xpad_stop_ff(struct usb_xpad *xpad) +{ + if (xpad->xtype == XTYPE_XBOX360) + usb_kill_urb(xpad->irq_out); +} + +static void xpad_deinit_ff(struct usb_xpad *xpad) +{ + if (xpad->xtype == XTYPE_XBOX360) { + usb_free_urb(xpad->irq_out); + usb_buffer_free(xpad->udev, XPAD_PKT_LEN, + xpad->odata, xpad->odata_dma); + } +} + +#else +static int xpad_init_ff(struct usb_interface *intf, struct usb_xpad *xpad) { return 0; } +static void xpad_stop_ff(struct usb_xpad *xpad) { } +static void xpad_deinit_ff(struct usb_xpad *xpad) { } +#endif + +static int xpad_open(struct input_dev *dev) { struct usb_xpad *xpad = input_get_drvdata(dev); @@ -275,11 +467,12 @@ static int xpad_open (struct input_dev *dev) return 0; } -static void xpad_close (struct input_dev *dev) +static void xpad_close(struct input_dev *dev) { struct usb_xpad *xpad = input_get_drvdata(dev); usb_kill_urb(xpad->irq_in); + xpad_stop_ff(xpad); } static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs) @@ -335,6 +528,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id xpad->udev = udev; xpad->dpad_mapping = xpad_device[i].dpad_mapping; + xpad->xtype = xpad_device[i].xtype; if (xpad->dpad_mapping == MAP_DPAD_UNKNOWN) xpad->dpad_mapping = dpad_to_buttons; xpad->dev = input_dev; @@ -356,6 +550,9 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id /* set up buttons */ for (i = 0; xpad_btn[i] >= 0; i++) set_bit(xpad_btn[i], input_dev->keybit); + if (xpad->xtype == XTYPE_XBOX360) + for (i = 0; xpad360_btn[i] >= 0; i++) + set_bit(xpad360_btn[i], input_dev->keybit); if (xpad->dpad_mapping == MAP_DPAD_TO_BUTTONS) for (i = 0; xpad_btn_pad[i] >= 0; i++) set_bit(xpad_btn_pad[i], input_dev->keybit); @@ -367,6 +564,10 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id for (i = 0; xpad_abs_pad[i] >= 0; i++) xpad_set_up_abs(input_dev, xpad_abs_pad[i]); + error = xpad_init_ff(intf, xpad); + if (error) + goto fail2; + ep_irq_in = &intf->cur_altsetting->endpoint[0].desc; usb_fill_int_urb(xpad->irq_in, udev, usb_rcvintpipe(udev, ep_irq_in->bEndpointAddress), @@ -396,10 +597,10 @@ static void xpad_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); if (xpad) { - usb_kill_urb(xpad->irq_in); input_unregister_device(xpad->dev); + xpad_deinit_ff(xpad); usb_free_urb(xpad->irq_in); - usb_buffer_free(interface_to_usbdev(intf), XPAD_PKT_LEN, + usb_buffer_free(xpad->udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma); kfree(xpad); } diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 9950fcb3365..41fc3d03b6e 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -89,7 +89,7 @@ static unsigned char atkbd_set2_keycode[512] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125, 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127, - 159, 0,115, 0,164, 0, 0,116,158, 0,150,166, 0, 0, 0,142, + 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142, 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0, 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112, @@ -111,7 +111,7 @@ static unsigned char atkbd_set3_keycode[512] = { 82, 83, 80, 76, 77, 72, 69, 98, 0, 96, 81, 0, 78, 73, 55,183, 184,185,186,187, 74, 94, 92, 93, 0, 0, 0,125,126,127,112, 0, - 0,139,150,163,165,115,152,150,166,140,160,154,113,114,167,168, + 0,139,172,163,165,115,152,172,166,140,160,154,113,114,167,168, 148,149,147,140 }; diff --git a/drivers/input/keyboard/pxa27x_keyboard.c b/drivers/input/keyboard/pxa27x_keyboard.c index f9e82c9ca42..ebe5eacf299 100644 --- a/drivers/input/keyboard/pxa27x_keyboard.c +++ b/drivers/input/keyboard/pxa27x_keyboard.c @@ -140,7 +140,7 @@ static int pxakbd_resume(struct platform_device *pdev) KPREC = pdata->reg_kprec; /* Enable unit clock */ - pxa_set_cken(CKEN19_KEYPAD, 1); + pxa_set_cken(CKEN_KEYPAD, 1); } mutex_unlock(&input_dev->mutex); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 88e29074ac9..9b26574f146 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -65,9 +65,13 @@ config INPUT_COBALT_BTNS config INPUT_WISTRON_BTNS tristate "x86 Wistron laptop button interface" depends on X86 && !X86_64 + select INPUT_POLLDEV + select NEW_LEDS + select LEDS_CLASS help Say Y here for support of Winstron laptop button interface, used on - laptops of various brands, including Acer and Fujitsu-Siemens. + laptops of various brands, including Acer and Fujitsu-Siemens. If + available, mail and wifi leds will be controlable via /sys/class/leds. To compile this driver as a module, choose M here: the module will be called wistron_btns. diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c index 961aad7a047..60121f10f8d 100644 --- a/drivers/input/misc/wistron_btns.c +++ b/drivers/input/misc/wistron_btns.c @@ -20,37 +20,31 @@ #include <linux/io.h> #include <linux/dmi.h> #include <linux/init.h> -#include <linux/input.h> +#include <linux/input-polldev.h> #include <linux/interrupt.h> +#include <linux/jiffies.h> #include <linux/kernel.h> #include <linux/mc146818rtc.h> #include <linux/module.h> #include <linux/preempt.h> #include <linux/string.h> -#include <linux/timer.h> #include <linux/types.h> #include <linux/platform_device.h> +#include <linux/leds.h> -/* - * Number of attempts to read data from queue per poll; - * the queue can hold up to 31 entries - */ -#define MAX_POLL_ITERATIONS 64 - -#define POLL_FREQUENCY 10 /* Number of polls per second */ - -#if POLL_FREQUENCY > HZ -#error "POLL_FREQUENCY too high" -#endif +/* How often we poll keys - msecs */ +#define POLL_INTERVAL_DEFAULT 500 /* when idle */ +#define POLL_INTERVAL_BURST 100 /* when a key was recently pressed */ /* BIOS subsystem IDs */ #define WIFI 0x35 #define BLUETOOTH 0x34 +#define MAIL_LED 0x31 MODULE_AUTHOR("Miloslav Trmac <mitr@volny.cz>"); MODULE_DESCRIPTION("Wistron laptop button driver"); MODULE_LICENSE("GPL v2"); -MODULE_VERSION("0.2"); +MODULE_VERSION("0.3"); static int force; /* = 0; */ module_param(force, bool, 0); @@ -248,9 +242,10 @@ enum { KE_END, KE_KEY, KE_SW, KE_WIFI, KE_BLUETOOTH }; #define FE_WIFI_LED 0x02 #define FE_UNTESTED 0x80 -static const struct key_entry *keymap; /* = NULL; Current key map */ +static struct key_entry *keymap; /* = NULL; Current key map */ static int have_wifi; static int have_bluetooth; +static int have_leds; static int __init dmi_matched(struct dmi_system_id *dmi) { @@ -263,6 +258,8 @@ static int __init dmi_matched(struct dmi_system_id *dmi) else if (key->type == KE_BLUETOOTH) have_bluetooth = 1; } + have_leds = key->code & (FE_MAIL_LED | FE_WIFI_LED); + return 1; } @@ -966,118 +963,163 @@ static int __init select_keymap(void) /* Input layer interface */ -static struct input_dev *input_dev; +static struct input_polled_dev *wistron_idev; +static unsigned long jiffies_last_press; +static int wifi_enabled; +static int bluetooth_enabled; -static int __devinit setup_input_dev(void) +static void report_key(struct input_dev *dev, unsigned int keycode) { - const struct key_entry *key; - int error; + input_report_key(dev, keycode, 1); + input_sync(dev); + input_report_key(dev, keycode, 0); + input_sync(dev); +} - input_dev = input_allocate_device(); - if (!input_dev) - return -ENOMEM; +static void report_switch(struct input_dev *dev, unsigned int code, int value) +{ + input_report_switch(dev, code, value); + input_sync(dev); +} - input_dev->name = "Wistron laptop buttons"; - input_dev->phys = "wistron/input0"; - input_dev->id.bustype = BUS_HOST; - input_dev->cdev.dev = &wistron_device->dev; - for (key = keymap; key->type != KE_END; key++) { - switch (key->type) { - case KE_KEY: - set_bit(EV_KEY, input_dev->evbit); - set_bit(key->keycode, input_dev->keybit); - break; + /* led management */ +static void wistron_mail_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + bios_set_state(MAIL_LED, (value != LED_OFF) ? 1 : 0); +} - case KE_SW: - set_bit(EV_SW, input_dev->evbit); - set_bit(key->sw.code, input_dev->swbit); - break; +/* same as setting up wifi card, but for laptops on which the led is managed */ +static void wistron_wifi_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + bios_set_state(WIFI, (value != LED_OFF) ? 1 : 0); +} - default: - ; - } - } +static struct led_classdev wistron_mail_led = { + .name = "mail:green", + .brightness_set = wistron_mail_led_set, +}; - /* reads information flags on KE_END */ - if (key->code & FE_UNTESTED) - printk(KERN_WARNING "Untested laptop multimedia keys, " - "please report success or failure to eric.piel" - "@tremplin-utc.net\n"); +static struct led_classdev wistron_wifi_led = { + .name = "wifi:red", + .brightness_set = wistron_wifi_led_set, +}; - error = input_register_device(input_dev); - if (error) { - input_free_device(input_dev); - return error; +static void __devinit wistron_led_init(struct device *parent) +{ + if (have_leds & FE_WIFI_LED) { + u16 wifi = bios_get_default_setting(WIFI); + if (wifi & 1) { + wistron_wifi_led.brightness = (wifi & 2) ? LED_FULL : LED_OFF; + if (led_classdev_register(parent, &wistron_wifi_led)) + have_leds &= ~FE_WIFI_LED; + else + bios_set_state(WIFI, wistron_wifi_led.brightness); + + } else + have_leds &= ~FE_WIFI_LED; } - return 0; + if (have_leds & FE_MAIL_LED) { + /* bios_get_default_setting(MAIL) always retuns 0, so just turn the led off */ + wistron_mail_led.brightness = LED_OFF; + if (led_classdev_register(parent, &wistron_mail_led)) + have_leds &= ~FE_MAIL_LED; + else + bios_set_state(MAIL_LED, wistron_mail_led.brightness); + } } -static void report_key(unsigned keycode) +static void __devexit wistron_led_remove(void) { - input_report_key(input_dev, keycode, 1); - input_sync(input_dev); - input_report_key(input_dev, keycode, 0); - input_sync(input_dev); + if (have_leds & FE_MAIL_LED) + led_classdev_unregister(&wistron_mail_led); + + if (have_leds & FE_WIFI_LED) + led_classdev_unregister(&wistron_wifi_led); } -static void report_switch(unsigned code, int value) +static inline void wistron_led_suspend(void) { - input_report_switch(input_dev, code, value); - input_sync(input_dev); + if (have_leds & FE_MAIL_LED) + led_classdev_suspend(&wistron_mail_led); + + if (have_leds & FE_WIFI_LED) + led_classdev_suspend(&wistron_wifi_led); } - /* Driver core */ +static inline void wistron_led_resume(void) +{ + if (have_leds & FE_MAIL_LED) + led_classdev_resume(&wistron_mail_led); -static int wifi_enabled; -static int bluetooth_enabled; + if (have_leds & FE_WIFI_LED) + led_classdev_resume(&wistron_wifi_led); +} + +static struct key_entry *wistron_get_entry_by_scancode(int code) +{ + struct key_entry *key; -static void poll_bios(unsigned long); + for (key = keymap; key->type != KE_END; key++) + if (code == key->code) + return key; -static struct timer_list poll_timer = TIMER_INITIALIZER(poll_bios, 0, 0); + return NULL; +} -static void handle_key(u8 code) +static struct key_entry *wistron_get_entry_by_keycode(int keycode) { - const struct key_entry *key; + struct key_entry *key; - for (key = keymap; key->type != KE_END; key++) { - if (code == key->code) { - switch (key->type) { - case KE_KEY: - report_key(key->keycode); - break; + for (key = keymap; key->type != KE_END; key++) + if (key->type == KE_KEY && keycode == key->keycode) + return key; - case KE_SW: - report_switch(key->sw.code, key->sw.value); - break; + return NULL; +} - case KE_WIFI: - if (have_wifi) { - wifi_enabled = !wifi_enabled; - bios_set_state(WIFI, wifi_enabled); - } - break; +static void handle_key(u8 code) +{ + const struct key_entry *key = wistron_get_entry_by_scancode(code); - case KE_BLUETOOTH: - if (have_bluetooth) { - bluetooth_enabled = !bluetooth_enabled; - bios_set_state(BLUETOOTH, bluetooth_enabled); - } - break; + if (key) { + switch (key->type) { + case KE_KEY: + report_key(wistron_idev->input, key->keycode); + break; - case KE_END: - break; - default: - BUG(); + case KE_SW: + report_switch(wistron_idev->input, + key->sw.code, key->sw.value); + break; + + case KE_WIFI: + if (have_wifi) { + wifi_enabled = !wifi_enabled; + bios_set_state(WIFI, wifi_enabled); + } + break; + + case KE_BLUETOOTH: + if (have_bluetooth) { + bluetooth_enabled = !bluetooth_enabled; + bios_set_state(BLUETOOTH, bluetooth_enabled); } - return; + break; + + default: + BUG(); } - } - printk(KERN_NOTICE "wistron_btns: Unknown key code %02X\n", code); + jiffies_last_press = jiffies; + } else + printk(KERN_NOTICE + "wistron_btns: Unknown key code %02X\n", code); } -static void poll_bios(unsigned long discard) +static void poll_bios(bool discard) { u8 qlen; u16 val; @@ -1090,15 +1132,118 @@ static void poll_bios(unsigned long discard) if (val != 0 && !discard) handle_key((u8)val); } +} + +static void wistron_flush(struct input_polled_dev *dev) +{ + /* Flush stale event queue */ + poll_bios(true); +} + +static void wistron_poll(struct input_polled_dev *dev) +{ + poll_bios(false); + + /* Increase poll frequency if user is currently pressing keys (< 2s ago) */ + if (time_before(jiffies, jiffies_last_press + 2 * HZ)) + dev->poll_interval = POLL_INTERVAL_BURST; + else + dev->poll_interval = POLL_INTERVAL_DEFAULT; +} + +static int wistron_getkeycode(struct input_dev *dev, int scancode, int *keycode) +{ + const struct key_entry *key = wistron_get_entry_by_scancode(scancode); + + if (key && key->type == KE_KEY) { + *keycode = key->keycode; + return 0; + } + + return -EINVAL; +} + +static int wistron_setkeycode(struct input_dev *dev, int scancode, int keycode) +{ + struct key_entry *key; + int old_keycode; + + if (keycode < 0 || keycode > KEY_MAX) + return -EINVAL; + + key = wistron_get_entry_by_scancode(scancode); + if (key && key->type == KE_KEY) { + old_keycode = key->keycode; + key->keycode = keycode; + set_bit(keycode, dev->keybit); + if (!wistron_get_entry_by_keycode(old_keycode)) + clear_bit(old_keycode, dev->keybit); + return 0; + } - mod_timer(&poll_timer, jiffies + HZ / POLL_FREQUENCY); + return -EINVAL; } +static int __devinit setup_input_dev(void) +{ + const struct key_entry *key; + struct input_dev *input_dev; + int error; + + wistron_idev = input_allocate_polled_device(); + if (!wistron_idev) + return -ENOMEM; + + wistron_idev->flush = wistron_flush; + wistron_idev->poll = wistron_poll; + wistron_idev->poll_interval = POLL_INTERVAL_DEFAULT; + + input_dev = wistron_idev->input; + input_dev->name = "Wistron laptop buttons"; + input_dev->phys = "wistron/input0"; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &wistron_device->dev; + + input_dev->getkeycode = wistron_getkeycode; + input_dev->setkeycode = wistron_setkeycode; + + for (key = keymap; key->type != KE_END; key++) { + switch (key->type) { + case KE_KEY: + set_bit(EV_KEY, input_dev->evbit); + set_bit(key->keycode, input_dev->keybit); + break; + + case KE_SW: + set_bit(EV_SW, input_dev->evbit); + set_bit(key->sw.code, input_dev->swbit); + break; + + default: + break; + } + } + + /* reads information flags on KE_END */ + if (key->code & FE_UNTESTED) + printk(KERN_WARNING "Untested laptop multimedia keys, " + "please report success or failure to eric.piel" + "@tremplin-utc.net\n"); + + error = input_register_polled_device(wistron_idev); + if (error) { + input_free_polled_device(wistron_idev); + return error; + } + + return 0; +} + +/* Driver core */ + static int __devinit wistron_probe(struct platform_device *dev) { - int err = setup_input_dev(); - if (err) - return err; + int err; bios_attach(); cmos_address = bios_get_cmos_address(); @@ -1125,15 +1270,21 @@ static int __devinit wistron_probe(struct platform_device *dev) bios_set_state(BLUETOOTH, bluetooth_enabled); } - poll_bios(1); /* Flush stale event queue and arm timer */ + wistron_led_init(&dev->dev); + err = setup_input_dev(); + if (err) { + bios_detach(); + return err; + } return 0; } static int __devexit wistron_remove(struct platform_device *dev) { - del_timer_sync(&poll_timer); - input_unregister_device(input_dev); + wistron_led_remove(); + input_unregister_polled_device(wistron_idev); + input_free_polled_device(wistron_idev); bios_detach(); return 0; @@ -1142,14 +1293,13 @@ static int __devexit wistron_remove(struct platform_device *dev) #ifdef CONFIG_PM static int wistron_suspend(struct platform_device *dev, pm_message_t state) { - del_timer_sync(&poll_timer); - if (have_wifi) bios_set_state(WIFI, 0); if (have_bluetooth) bios_set_state(BLUETOOTH, 0); + wistron_led_suspend(); return 0; } @@ -1161,7 +1311,8 @@ static int wistron_resume(struct platform_device *dev) if (have_bluetooth) bios_set_state(BLUETOOTH, bluetooth_enabled); - poll_bios(1); + wistron_led_resume(); + poll_bios(true); return 0; } diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 50e06e8dd05..7bbea097cda 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -216,4 +216,20 @@ config MOUSE_HIL help Say Y here to support HIL pointers. +config MOUSE_GPIO + tristate "GPIO mouse" + depends on GENERIC_GPIO + select INPUT_POLLDEV + help + This driver simulates a mouse on GPIO lines of various CPUs (and some + other chips). + + Say Y here if your device has buttons or a simple joystick connected + directly to GPIO lines. Your board-specific setup logic must also + provide a platform device and platform data saying which GPIOs are + used. + + To compile this driver as a module, choose M here: the + module will be called gpio_mouse. + endif diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index aa4ba878533..9e6e3633082 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_MOUSE_PS2) += psmouse.o obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o +obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o psmouse-objs := psmouse-base.o synaptics.o diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c new file mode 100644 index 00000000000..0936d6ba015 --- /dev/null +++ b/drivers/input/mouse/gpio_mouse.c @@ -0,0 +1,196 @@ +/* + * Driver for simulating a mouse on GPIO lines. + * + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/version.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/input-polldev.h> +#include <linux/gpio_mouse.h> + +#include <asm/gpio.h> + +/* + * Timer function which is run every scan_ms ms when the device is opened. + * The dev input varaible is set to the the input_dev pointer. + */ +static void gpio_mouse_scan(struct input_polled_dev *dev) +{ + struct gpio_mouse_platform_data *gpio = dev->private; + struct input_dev *input = dev->input; + int x, y; + + if (gpio->bleft >= 0) + input_report_key(input, BTN_LEFT, + gpio_get_value(gpio->bleft) ^ gpio->polarity); + if (gpio->bmiddle >= 0) + input_report_key(input, BTN_MIDDLE, + gpio_get_value(gpio->bmiddle) ^ gpio->polarity); + if (gpio->bright >= 0) + input_report_key(input, BTN_RIGHT, + gpio_get_value(gpio->bright) ^ gpio->polarity); + + x = (gpio_get_value(gpio->right) ^ gpio->polarity) + - (gpio_get_value(gpio->left) ^ gpio->polarity); + y = (gpio_get_value(gpio->down) ^ gpio->polarity) + - (gpio_get_value(gpio->up) ^ gpio->polarity); + + input_report_rel(input, REL_X, x); + input_report_rel(input, REL_Y, y); + input_sync(input); +} + +static int __init gpio_mouse_probe(struct platform_device *pdev) +{ + struct gpio_mouse_platform_data *pdata = pdev->dev.platform_data; + struct input_polled_dev *input_poll; + struct input_dev *input; + int pin, i; + int error; + + if (!pdata) { + dev_err(&pdev->dev, "no platform data\n"); + error = -ENXIO; + goto out; + } + + if (pdata->scan_ms < 0) { + dev_err(&pdev->dev, "invalid scan time\n"); + error = -EINVAL; + goto out; + } + + for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) { + pin = pdata->pins[i]; + + if (pin < 0) { + + if (i <= GPIO_MOUSE_PIN_RIGHT) { + /* Mouse direction is required. */ + dev_err(&pdev->dev, + "missing GPIO for directions\n"); + error = -EINVAL; + goto out_free_gpios; + } + + if (i == GPIO_MOUSE_PIN_BLEFT) + dev_dbg(&pdev->dev, "no left button defined\n"); + + } else { + error = gpio_request(pin, "gpio_mouse"); + if (error) { + dev_err(&pdev->dev, "fail %d pin (%d idx)\n", + pin, i); + goto out_free_gpios; + } + + gpio_direction_input(pin); + } + } + + input_poll = input_allocate_polled_device(); + if (!input_poll) { + dev_err(&pdev->dev, "not enough memory for input device\n"); + error = -ENOMEM; + goto out_free_gpios; + } + + platform_set_drvdata(pdev, input_poll); + + /* set input-polldev handlers */ + input_poll->private = pdata; + input_poll->poll = gpio_mouse_scan; + input_poll->poll_interval = pdata->scan_ms; + + input = input_poll->input; + input->name = pdev->name; + input->id.bustype = BUS_HOST; + input->dev.parent = &pdev->dev; + + input_set_capability(input, EV_REL, REL_X); + input_set_capability(input, EV_REL, REL_Y); + if (pdata->bleft >= 0) + input_set_capability(input, EV_KEY, BTN_LEFT); + if (pdata->bmiddle >= 0) + input_set_capability(input, EV_KEY, BTN_MIDDLE); + if (pdata->bright >= 0) + input_set_capability(input, EV_KEY, BTN_RIGHT); + + error = input_register_polled_device(input_poll); + if (error) { + dev_err(&pdev->dev, "could not register input device\n"); + goto out_free_polldev; + } + + dev_dbg(&pdev->dev, "%d ms scan time, buttons: %s%s%s\n", + pdata->scan_ms, + pdata->bleft < 0 ? "" : "left ", + pdata->bmiddle < 0 ? "" : "middle ", + pdata->bright < 0 ? "" : "right"); + + return 0; + + out_free_polldev: + input_free_polled_device(input_poll); + platform_set_drvdata(pdev, NULL); + + out_free_gpios: + while (--i >= 0) { + pin = pdata->pins[i]; + if (pin) + gpio_free(pin); + } + out: + return error; +} + +static int __devexit gpio_mouse_remove(struct platform_device *pdev) +{ + struct input_polled_dev *input = platform_get_drvdata(pdev); + struct gpio_mouse_platform_data *pdata = input->private; + int pin, i; + + input_unregister_polled_device(input); + input_free_polled_device(input); + + for (i = 0; i < GPIO_MOUSE_PIN_MAX; i++) { + pin = pdata->pins[i]; + if (pin >= 0) + gpio_free(pin); + } + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +struct platform_driver gpio_mouse_device_driver = { + .remove = __devexit_p(gpio_mouse_remove), + .driver = { + .name = "gpio_mouse", + } +}; + +static int __init gpio_mouse_init(void) +{ + return platform_driver_probe(&gpio_mouse_device_driver, + gpio_mouse_probe); +} +module_init(gpio_mouse_init); + +static void __exit gpio_mouse_exit(void) +{ + platform_driver_unregister(&gpio_mouse_device_driver); +} +module_exit(gpio_mouse_exit); + +MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>"); +MODULE_DESCRIPTION("GPIO mouse driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index f15f695777f..b9f0fb2530e 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -178,6 +178,15 @@ static psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse) } /* + * Cortron PS2 Trackball reports SIDE button on the 4th bit of the first + * byte. + */ + if (psmouse->type == PSMOUSE_CORTRON) { + input_report_key(dev, BTN_SIDE, (packet[0] >> 3) & 1); + packet[0] |= 0x08; + } + +/* * Generic PS/2 Mouse */ @@ -539,6 +548,20 @@ static int ps2bare_detect(struct psmouse *psmouse, int set_properties) return 0; } +/* + * Cortron PS/2 protocol detection. There's no special way to detect it, so it + * must be forced by sysfs protocol writing. + */ +static int cortron_detect(struct psmouse *psmouse, int set_properties) +{ + if (set_properties) { + psmouse->vendor = "Cortron"; + psmouse->name = "PS/2 Trackball"; + set_bit(BTN_SIDE, psmouse->dev->keybit); + } + + return 0; +} /* * psmouse_extensions() probes for any extensions to the basic PS/2 protocol @@ -740,6 +763,12 @@ static const struct psmouse_protocol psmouse_protocols[] = { }, #endif { + .type = PSMOUSE_CORTRON, + .name = "CortronPS/2", + .alias = "cortps", + .detect = cortron_detect, + }, + { .type = PSMOUSE_AUTO, .name = "auto", .alias = "any", diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index 3964e8acbc5..27a68835b5b 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -88,6 +88,7 @@ enum psmouse_type { PSMOUSE_LIFEBOOK, PSMOUSE_TRACKPOINT, PSMOUSE_TOUCHKIT_PS2, + PSMOUSE_CORTRON, PSMOUSE_AUTO /* This one should always be last */ }; diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 3f4866d8d18..9173916b8be 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -64,6 +64,7 @@ struct mousedev { wait_queue_head_t wait; struct list_head client_list; struct input_handle handle; + struct device dev; struct list_head mixdev_node; int mixdev_open; @@ -112,7 +113,7 @@ static unsigned char mousedev_imex_seq[] = { 0xf3, 200, 0xf3, 200, 0xf3, 80 }; static struct input_handler mousedev_handler; static struct mousedev *mousedev_table[MOUSEDEV_MINORS]; -static struct mousedev mousedev_mix; +static struct mousedev *mousedev_mix; static LIST_HEAD(mousedev_mix_list); #define fx(i) (mousedev->old_x[(mousedev->pkt_count - (i)) & 03]) @@ -218,10 +219,10 @@ static void mousedev_key_event(struct mousedev *mousedev, unsigned int code, int if (value) { set_bit(index, &mousedev->packet.buttons); - set_bit(index, &mousedev_mix.packet.buttons); + set_bit(index, &mousedev_mix->packet.buttons); } else { clear_bit(index, &mousedev->packet.buttons); - clear_bit(index, &mousedev_mix.packet.buttons); + clear_bit(index, &mousedev_mix->packet.buttons); } } @@ -287,11 +288,11 @@ static void mousedev_touchpad_touch(struct mousedev *mousedev, int value) * motion packet so we won't mess current position. */ set_bit(0, &mousedev->packet.buttons); - set_bit(0, &mousedev_mix.packet.buttons); - mousedev_notify_readers(mousedev, &mousedev_mix.packet); - mousedev_notify_readers(&mousedev_mix, &mousedev_mix.packet); + set_bit(0, &mousedev_mix->packet.buttons); + mousedev_notify_readers(mousedev, &mousedev_mix->packet); + mousedev_notify_readers(mousedev_mix, &mousedev_mix->packet); clear_bit(0, &mousedev->packet.buttons); - clear_bit(0, &mousedev_mix.packet.buttons); + clear_bit(0, &mousedev_mix->packet.buttons); } mousedev->touch = mousedev->pkt_count = 0; mousedev->frac_dx = 0; @@ -343,7 +344,7 @@ static void mousedev_event(struct input_handle *handle, unsigned int type, unsig } mousedev_notify_readers(mousedev, &mousedev->packet); - mousedev_notify_readers(&mousedev_mix, &mousedev->packet); + mousedev_notify_readers(mousedev_mix, &mousedev->packet); mousedev->packet.dx = mousedev->packet.dy = mousedev->packet.dz = 0; mousedev->packet.abs_event = 0; @@ -362,8 +363,10 @@ static int mousedev_fasync(int fd, struct file *file, int on) return retval < 0 ? retval : 0; } -static void mousedev_free(struct mousedev *mousedev) +static void mousedev_free(struct device *dev) { + struct mousedev *mousedev = container_of(dev, struct mousedev, dev); + mousedev_table[mousedev->minor] = NULL; kfree(mousedev); } @@ -372,15 +375,16 @@ static int mixdev_add_device(struct mousedev *mousedev) { int error; - if (mousedev_mix.open) { + if (mousedev_mix->open) { error = input_open_device(&mousedev->handle); if (error) return error; mousedev->open++; - mousedev->mixdev_open++; + mousedev->mixdev_open = 1; } + get_device(&mousedev->dev); list_add_tail(&mousedev->mixdev_node, &mousedev_mix_list); return 0; @@ -395,36 +399,40 @@ static void mixdev_remove_device(struct mousedev *mousedev) } list_del_init(&mousedev->mixdev_node); + put_device(&mousedev->dev); } static void mixdev_open_devices(void) { struct mousedev *mousedev; + if (mousedev_mix->open++) + return; + list_for_each_entry(mousedev, &mousedev_mix_list, mixdev_node) { - if (mousedev->exist && !mousedev->open) { - if (input_open_device(&mousedev->handle)) - continue; + if (!mousedev->mixdev_open) { + if (!mousedev->open && mousedev->exist) + if (input_open_device(&mousedev->handle)) + continue; mousedev->open++; - mousedev->mixdev_open++; + mousedev->mixdev_open = 1; } } } static void mixdev_close_devices(void) { - struct mousedev *mousedev, *next; + struct mousedev *mousedev; - list_for_each_entry_safe(mousedev, next, &mousedev_mix_list, mixdev_node) { + if (--mousedev_mix->open) + return; + + list_for_each_entry(mousedev, &mousedev_mix_list, mixdev_node) { if (mousedev->mixdev_open) { mousedev->mixdev_open = 0; - if (!--mousedev->open) { - if (mousedev->exist) - input_close_device(&mousedev->handle); - else - mousedev_free(mousedev); - } + if (!--mousedev->open && mousedev->exist) + input_close_device(&mousedev->handle); } } } @@ -439,14 +447,12 @@ static int mousedev_release(struct inode *inode, struct file *file) list_del(&client->node); kfree(client); - if (!--mousedev->open) { - if (mousedev->minor == MOUSEDEV_MIX) - mixdev_close_devices(); - else if (mousedev->exist) - input_close_device(&mousedev->handle); - else - mousedev_free(mousedev); - } + if (mousedev->minor == MOUSEDEV_MIX) + mixdev_close_devices(); + else if (!--mousedev->open && mousedev->exist) + input_close_device(&mousedev->handle); + + put_device(&mousedev->dev); return 0; } @@ -473,9 +479,13 @@ static int mousedev_open(struct inode *inode, struct file *file) if (!mousedev) return -ENODEV; + get_device(&mousedev->dev); + client = kzalloc(sizeof(struct mousedev_client), GFP_KERNEL); - if (!client) - return -ENOMEM; + if (!client) { + error = -ENOMEM; + goto err_put_mousedev; + } spin_lock_init(&client->packet_lock); client->pos_x = xres / 2; @@ -483,21 +493,23 @@ static int mousedev_open(struct inode *inode, struct file *file) client->mousedev = mousedev; list_add_tail(&client->node, &mousedev->client_list); - if (!mousedev->open++) { - if (mousedev->minor == MOUSEDEV_MIX) - mixdev_open_devices(); - else if (mousedev->exist) { - error = input_open_device(&mousedev->handle); - if (error) { - list_del(&client->node); - kfree(client); - return error; - } - } + if (mousedev->minor == MOUSEDEV_MIX) + mixdev_open_devices(); + else if (!mousedev->open++ && mousedev->exist) { + error = input_open_device(&mousedev->handle); + if (error) + goto err_free_client; } file->private_data = client; return 0; + + err_free_client: + list_del(&client->node); + kfree(client); + err_put_mousedev: + put_device(&mousedev->dev); + return error; } static inline int mousedev_limit_delta(int delta, int limit) @@ -680,57 +692,96 @@ static const struct file_operations mousedev_fops = { .fasync = mousedev_fasync, }; -static int mousedev_connect(struct input_handler *handler, struct input_dev *dev, - const struct input_device_id *id) +static struct mousedev *mousedev_create(struct input_dev *dev, + struct input_handler *handler, + int minor) { struct mousedev *mousedev; - struct class_device *cdev; - dev_t devt; - int minor; int error; - for (minor = 0; minor < MOUSEDEV_MINORS && mousedev_table[minor]; minor++); - if (minor == MOUSEDEV_MINORS) { - printk(KERN_ERR "mousedev: no more free mousedev devices\n"); - return -ENFILE; - } - mousedev = kzalloc(sizeof(struct mousedev), GFP_KERNEL); - if (!mousedev) - return -ENOMEM; + if (!mousedev) { + error = -ENOMEM; + goto err_out; + } INIT_LIST_HEAD(&mousedev->client_list); INIT_LIST_HEAD(&mousedev->mixdev_node); init_waitqueue_head(&mousedev->wait); + if (minor == MOUSEDEV_MIX) + strlcpy(mousedev->name, "mice", sizeof(mousedev->name)); + else + snprintf(mousedev->name, sizeof(mousedev->name), + "mouse%d", minor); + mousedev->minor = minor; mousedev->exist = 1; mousedev->handle.dev = dev; mousedev->handle.name = mousedev->name; mousedev->handle.handler = handler; mousedev->handle.private = mousedev; - sprintf(mousedev->name, "mouse%d", minor); - mousedev_table[minor] = mousedev; + strlcpy(mousedev->dev.bus_id, mousedev->name, + sizeof(mousedev->dev.bus_id)); + mousedev->dev.class = &input_class; + if (dev) + mousedev->dev.parent = &dev->dev; + mousedev->dev.devt = MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor); + mousedev->dev.release = mousedev_free; + device_initialize(&mousedev->dev); - devt = MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + minor), + mousedev_table[minor] = mousedev; - cdev = class_device_create(&input_class, &dev->cdev, devt, - dev->cdev.dev, mousedev->name); - if (IS_ERR(cdev)) { - error = PTR_ERR(cdev); + error = device_add(&mousedev->dev); + if (error) goto err_free_mousedev; + + return mousedev; + + err_free_mousedev: + put_device(&mousedev->dev); + err_out: + return ERR_PTR(error); +} + +static void mousedev_destroy(struct mousedev *mousedev) +{ + struct mousedev_client *client; + + device_del(&mousedev->dev); + mousedev->exist = 0; + + if (mousedev->open) { + input_close_device(&mousedev->handle); + list_for_each_entry(client, &mousedev->client_list, node) + kill_fasync(&client->fasync, SIGIO, POLL_HUP); + wake_up_interruptible(&mousedev->wait); } - /* temporary symlink to keep userspace happy */ - error = sysfs_create_link(&input_class.subsys.kobj, - &cdev->kobj, mousedev->name); - if (error) - goto err_cdev_destroy; + put_device(&mousedev->dev); +} + +static int mousedev_connect(struct input_handler *handler, struct input_dev *dev, + const struct input_device_id *id) +{ + struct mousedev *mousedev; + int minor; + int error; + + for (minor = 0; minor < MOUSEDEV_MINORS && mousedev_table[minor]; minor++); + if (minor == MOUSEDEV_MINORS) { + printk(KERN_ERR "mousedev: no more free mousedev devices\n"); + return -ENFILE; + } + + mousedev = mousedev_create(dev, handler, minor); + if (IS_ERR(mousedev)) + return PTR_ERR(mousedev); error = input_register_handle(&mousedev->handle); if (error) - goto err_remove_link; + goto err_delete_mousedev; error = mixdev_add_device(mousedev); if (error) @@ -740,37 +791,18 @@ static int mousedev_connect(struct input_handler *handler, struct input_dev *dev err_unregister_handle: input_unregister_handle(&mousedev->handle); - err_remove_link: - sysfs_remove_link(&input_class.subsys.kobj, mousedev->name); - err_cdev_destroy: - class_device_destroy(&input_class, devt); - err_free_mousedev: - mousedev_table[minor] = NULL; - kfree(mousedev); + err_delete_mousedev: + device_unregister(&mousedev->dev); return error; } static void mousedev_disconnect(struct input_handle *handle) { struct mousedev *mousedev = handle->private; - struct mousedev_client *client; - - input_unregister_handle(handle); - - sysfs_remove_link(&input_class.subsys.kobj, mousedev->name); - class_device_destroy(&input_class, - MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + mousedev->minor)); - mousedev->exist = 0; mixdev_remove_device(mousedev); - - if (mousedev->open) { - input_close_device(handle); - list_for_each_entry(client, &mousedev->client_list, node) - kill_fasync(&client->fasync, SIGIO, POLL_HUP); - wake_up_interruptible(&mousedev->wait); - } else - mousedev_free(mousedev); + input_unregister_handle(handle); + mousedev_destroy(mousedev); } static const struct input_device_id mousedev_ids[] = { @@ -822,25 +854,16 @@ static int psaux_registered; static int __init mousedev_init(void) { - struct class_device *cdev; int error; + mousedev_mix = mousedev_create(NULL, &mousedev_handler, MOUSEDEV_MIX); + if (IS_ERR(mousedev_mix)) + return PTR_ERR(mousedev_mix); + error = input_register_handler(&mousedev_handler); - if (error) + if (error) { + mousedev_destroy(mousedev_mix); return error; - - memset(&mousedev_mix, 0, sizeof(struct mousedev)); - INIT_LIST_HEAD(&mousedev_mix.client_list); - init_waitqueue_head(&mousedev_mix.wait); - mousedev_table[MOUSEDEV_MIX] = &mousedev_mix; - mousedev_mix.exist = 1; - mousedev_mix.minor = MOUSEDEV_MIX; - - cdev = class_device_create(&input_class, NULL, - MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX), NULL, "mice"); - if (IS_ERR(cdev)) { - input_unregister_handler(&mousedev_handler); - return PTR_ERR(cdev); } #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX @@ -863,9 +886,8 @@ static void __exit mousedev_exit(void) if (psaux_registered) misc_deregister(&psaux_mouse); #endif - class_device_destroy(&input_class, - MKDEV(INPUT_MAJOR, MOUSEDEV_MINOR_BASE + MOUSEDEV_MIX)); input_unregister_handler(&mousedev_handler); + mousedev_destroy(mousedev_mix); } module_init(mousedev_init); diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c index 887357666c6..0403622ae26 100644 --- a/drivers/input/serio/serio_raw.c +++ b/drivers/input/serio/serio_raw.c @@ -160,7 +160,7 @@ static ssize_t serio_raw_read(struct file *file, char __user *buffer, size_t cou { struct serio_raw_list *list = file->private_data; struct serio_raw *serio_raw = list->serio_raw; - char c; + char uninitialized_var(c); ssize_t retval = 0; if (!serio_raw->serio) diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c index cc0a498763d..94683f58c9e 100644 --- a/drivers/input/tablet/aiptek.c +++ b/drivers/input/tablet/aiptek.c @@ -82,8 +82,8 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.5 (May-15-2004)" -#define DRIVER_AUTHOR "Bryan W. Headley/Chris Atenasio" +#define DRIVER_VERSION "v2.3 (May 2, 2007)" +#define DRIVER_AUTHOR "Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen" #define DRIVER_DESC "Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)" /* @@ -112,7 +112,7 @@ * (returned as Report 3 - absolute coordinates from the mouse) * * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 - * byte0 0 0 0 0 0 0 1 0 + * byte0 0 0 0 0 0 0 1 1 * byte1 X7 X6 X5 X4 X3 X2 X1 X0 * byte2 X15 X14 X13 X12 X11 X10 X9 X8 * byte3 Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0 @@ -134,7 +134,7 @@ * (returned as Report 5 - macrokeys from the mouse) * * bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0 - * byte0 0 0 0 0 0 1 0 0 + * byte0 0 0 0 0 0 1 0 1 * byte1 0 0 0 BS2 BS Tip IR DV * byte2 0 0 0 0 0 0 1 0 * byte3 0 0 0 K4 K3 K2 K1 K0 @@ -218,15 +218,9 @@ #define AIPTEK_WHEEL_DISABLE (-10101) /* ToolCode values, which BTW are 0x140 .. 0x14f - * We have things set up such that if TOOL_BUTTON_FIRED_BIT is - * not set, we'll send one instance of AIPTEK_TOOL_BUTTON_xxx. - * - * Whenever the user resets the value, TOOL_BUTTON_FIRED_BIT will - * get reset. + * We have things set up such that if the tool button has changed, + * the tools get reset. */ -#define TOOL_BUTTON(x) ((x) & 0x14f) -#define TOOL_BUTTON_FIRED(x) ((x) & 0x200) -#define TOOL_BUTTON_FIRED_BIT 0x200 /* toolMode codes */ #define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN @@ -264,9 +258,9 @@ /* Mouse button programming */ -#define AIPTEK_MOUSE_LEFT_BUTTON 0x01 -#define AIPTEK_MOUSE_RIGHT_BUTTON 0x02 -#define AIPTEK_MOUSE_MIDDLE_BUTTON 0x04 +#define AIPTEK_MOUSE_LEFT_BUTTON 0x04 +#define AIPTEK_MOUSE_RIGHT_BUTTON 0x08 +#define AIPTEK_MOUSE_MIDDLE_BUTTON 0x10 /* Stylus button programming */ @@ -294,7 +288,6 @@ struct aiptek_features { int modelCode; /* Tablet model code (not unique) */ int firmwareCode; /* prom/eeprom version */ char usbPath[64 + 1]; /* device's physical usb path */ - char inputPath[64 + 1]; /* input device path */ }; struct aiptek_settings { @@ -327,9 +320,32 @@ struct aiptek { int inDelay; /* jitter: in jitter delay? */ unsigned long endDelay; /* jitter: time when delay ends */ int previousJitterable; /* jitterable prev value */ + + int lastMacro; /* macro key to reset */ + int previousToolMode; /* pen, pencil, brush, etc. tool */ unsigned char *data; /* incoming packet data */ }; +static const int eventTypes[] = { + EV_KEY, EV_ABS, EV_REL, EV_MSC, +}; + +static const int absEvents[] = { + ABS_X, ABS_Y, ABS_PRESSURE, ABS_TILT_X, ABS_TILT_Y, + ABS_WHEEL, ABS_MISC, +}; + +static const int relEvents[] = { + REL_X, REL_Y, REL_WHEEL, +}; + +static const int buttonEvents[] = { + BTN_LEFT, BTN_RIGHT, BTN_MIDDLE, + BTN_TOOL_PEN, BTN_TOOL_RUBBER, BTN_TOOL_PENCIL, BTN_TOOL_AIRBRUSH, + BTN_TOOL_BRUSH, BTN_TOOL_MOUSE, BTN_TOOL_LENS, BTN_TOUCH, + BTN_STYLUS, BTN_STYLUS2, +}; + /* * Permit easy lookup of keyboard events to send, versus * the bitmap which comes from the tablet. This hides the @@ -345,23 +361,39 @@ static const int macroKeyEvents[] = { }; /*********************************************************************** - * Relative reports deliver values in 2's complement format to - * deal with negative offsets. + * Map values to strings and back. Every map shoudl have the following + * as its last element: { NULL, AIPTEK_INVALID_VALUE }. */ -static int aiptek_convert_from_2s_complement(unsigned char c) +#define AIPTEK_INVALID_VALUE -1 + +struct aiptek_map { + const char *string; + int value; +}; + +static int map_str_to_val(const struct aiptek_map *map, const char *str, size_t count) { - int ret; - unsigned char b = c; - int negate = 0; + const struct aiptek_map *p; - if ((b & 0x80) != 0) { - b = ~b; - b--; - negate = 1; - } - ret = b; - ret = (negate == 1) ? -ret : ret; - return ret; + if (str[count - 1] == '\n') + count--; + + for (p = map; p->string; p++) + if (!strncmp(str, p->string, count)) + return p->value; + + return AIPTEK_INVALID_VALUE; +} + +static const char *map_val_to_str(const struct aiptek_map *map, int val) +{ + const struct aiptek_map *p; + + for (p = map; p->value != AIPTEK_INVALID_VALUE; p++) + if (val == p->value) + return p->string; + + return "unknown"; } /*********************************************************************** @@ -385,6 +417,9 @@ static int aiptek_convert_from_2s_complement(unsigned char c) * Proximity. Why two events? I thought it interesting to know if the * Proximity event occurred while the tablet was in absolute or relative * mode. + * Update: REL_MISC proved not to be such a good idea. With REL_MISC you + * get an event transmitted each time. ABS_MISC works better, since it + * can be set and re-set. Thus, only using ABS_MISC from now on. * * Other tablets use the notion of a certain minimum stylus pressure * to infer proximity. While that could have been done, that is yet @@ -441,8 +476,8 @@ static void aiptek_irq(struct urb *urb) aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE; } else { - x = aiptek_convert_from_2s_complement(data[2]); - y = aiptek_convert_from_2s_complement(data[3]); + x = (signed char) data[2]; + y = (signed char) data[3]; /* jitterable keeps track of whether any button has been pressed. * We're also using it to remap the physical mouse button mask @@ -451,18 +486,20 @@ static void aiptek_irq(struct urb *urb) * that a non-zero value indicates that one or more * mouse button was pressed.) */ - jitterable = data[5] & 0x07; + jitterable = data[1] & 0x07; - left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; - right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; - middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; + left = (data[1] & aiptek->curSetting.mouseButtonLeft >> 2) != 0 ? 1 : 0; + right = (data[1] & aiptek->curSetting.mouseButtonRight >> 2) != 0 ? 1 : 0; + middle = (data[1] & aiptek->curSetting.mouseButtonMiddle >> 2) != 0 ? 1 : 0; input_report_key(inputdev, BTN_LEFT, left); input_report_key(inputdev, BTN_MIDDLE, middle); input_report_key(inputdev, BTN_RIGHT, right); + + input_report_abs(inputdev, ABS_MISC, + 1 | AIPTEK_REPORT_TOOL_UNKNOWN); input_report_rel(inputdev, REL_X, x); input_report_rel(inputdev, REL_Y, y); - input_report_rel(inputdev, REL_MISC, 1 | AIPTEK_REPORT_TOOL_UNKNOWN); /* Wheel support is in the form of a single-event * firing. @@ -472,6 +509,11 @@ static void aiptek_irq(struct urb *urb) aiptek->curSetting.wheel); aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; } + if (aiptek->lastMacro != -1) { + input_report_key(inputdev, + macroKeyEvents[aiptek->lastMacro], 0); + aiptek->lastMacro = -1; + } input_sync(inputdev); } } @@ -489,8 +531,8 @@ static void aiptek_irq(struct urb *urb) y = le16_to_cpu(get_unaligned((__le16 *) (data + 3))); z = le16_to_cpu(get_unaligned((__le16 *) (data + 6))); - p = (data[5] & 0x01) != 0 ? 1 : 0; - dv = (data[5] & 0x02) != 0 ? 1 : 0; + dv = (data[5] & 0x01) != 0 ? 1 : 0; + p = (data[5] & 0x02) != 0 ? 1 : 0; tip = (data[5] & 0x04) != 0 ? 1 : 0; /* Use jitterable to re-arrange button masks @@ -505,16 +547,18 @@ static void aiptek_irq(struct urb *urb) * all 'bad' reports... */ if (dv != 0) { - /* If we've not already sent a tool_button_?? code, do - * so now. Then set FIRED_BIT so it won't be resent unless - * the user forces FIRED_BIT off. + /* If the selected tool changed, reset the old + * tool key, and set the new one. */ - if (TOOL_BUTTON_FIRED - (aiptek->curSetting.toolMode) == 0) { + if (aiptek->previousToolMode != + aiptek->curSetting.toolMode) { + input_report_key(inputdev, + aiptek->previousToolMode, 0); input_report_key(inputdev, - TOOL_BUTTON(aiptek->curSetting.toolMode), + aiptek->curSetting.toolMode, 1); - aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; + aiptek->previousToolMode = + aiptek->curSetting.toolMode; } if (p != 0) { @@ -550,6 +594,11 @@ static void aiptek_irq(struct urb *urb) } } input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_STYLUS); + if (aiptek->lastMacro != -1) { + input_report_key(inputdev, + macroKeyEvents[aiptek->lastMacro], 0); + aiptek->lastMacro = -1; + } input_sync(inputdev); } } @@ -568,23 +617,25 @@ static void aiptek_irq(struct urb *urb) jitterable = data[5] & 0x1c; - p = (data[5] & 0x01) != 0 ? 1 : 0; - dv = (data[5] & 0x02) != 0 ? 1 : 0; + dv = (data[5] & 0x01) != 0 ? 1 : 0; + p = (data[5] & 0x02) != 0 ? 1 : 0; left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; if (dv != 0) { - /* If we've not already sent a tool_button_?? code, do - * so now. Then set FIRED_BIT so it won't be resent unless - * the user forces FIRED_BIT off. + /* If the selected tool changed, reset the old + * tool key, and set the new one. */ - if (TOOL_BUTTON_FIRED - (aiptek->curSetting.toolMode) == 0) { + if (aiptek->previousToolMode != + aiptek->curSetting.toolMode) { + input_report_key(inputdev, + aiptek->previousToolMode, 0); input_report_key(inputdev, - TOOL_BUTTON(aiptek->curSetting.toolMode), + aiptek->curSetting.toolMode, 1); - aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; + aiptek->previousToolMode = + aiptek->curSetting.toolMode; } if (p != 0) { @@ -605,7 +656,12 @@ static void aiptek_irq(struct urb *urb) aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE; } } - input_report_rel(inputdev, REL_MISC, p | AIPTEK_REPORT_TOOL_MOUSE); + input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_MOUSE); + if (aiptek->lastMacro != -1) { + input_report_key(inputdev, + macroKeyEvents[aiptek->lastMacro], 0); + aiptek->lastMacro = -1; + } input_sync(inputdev); } } @@ -615,98 +671,83 @@ static void aiptek_irq(struct urb *urb) else if (data[0] == 4) { jitterable = data[1] & 0x18; - p = (data[1] & 0x01) != 0 ? 1 : 0; - dv = (data[1] & 0x02) != 0 ? 1 : 0; + dv = (data[1] & 0x01) != 0 ? 1 : 0; + p = (data[1] & 0x02) != 0 ? 1 : 0; tip = (data[1] & 0x04) != 0 ? 1 : 0; bs = (data[1] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0; pck = (data[1] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0; - macro = data[3]; + macro = dv && p && tip && !(data[3] & 1) ? (data[3] >> 1) : -1; z = le16_to_cpu(get_unaligned((__le16 *) (data + 4))); - if (dv != 0) { - /* If we've not already sent a tool_button_?? code, do - * so now. Then set FIRED_BIT so it won't be resent unless - * the user forces FIRED_BIT off. + if (dv) { + /* If the selected tool changed, reset the old + * tool key, and set the new one. */ - if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) { + if (aiptek->previousToolMode != + aiptek->curSetting.toolMode) { + input_report_key(inputdev, + aiptek->previousToolMode, 0); input_report_key(inputdev, - TOOL_BUTTON(aiptek->curSetting.toolMode), + aiptek->curSetting.toolMode, 1); - aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; + aiptek->previousToolMode = + aiptek->curSetting.toolMode; } + } - if (p != 0) { - input_report_key(inputdev, BTN_TOUCH, tip); - input_report_key(inputdev, BTN_STYLUS, bs); - input_report_key(inputdev, BTN_STYLUS2, pck); - input_report_abs(inputdev, ABS_PRESSURE, z); - } + if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) { + input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0); + aiptek->lastMacro = -1; + } - /* For safety, we're sending key 'break' codes for the - * neighboring macro keys. - */ - if (macro > 0) { - input_report_key(inputdev, - macroKeyEvents[macro - 1], 0); - } - if (macro < 25) { - input_report_key(inputdev, - macroKeyEvents[macro + 1], 0); - } - input_report_key(inputdev, macroKeyEvents[macro], p); - input_report_abs(inputdev, ABS_MISC, - p | AIPTEK_REPORT_TOOL_STYLUS); - input_sync(inputdev); + if (macro != -1 && macro != aiptek->lastMacro) { + input_report_key(inputdev, macroKeyEvents[macro], 1); + aiptek->lastMacro = macro; } + input_report_abs(inputdev, ABS_MISC, + p | AIPTEK_REPORT_TOOL_STYLUS); + input_sync(inputdev); } /* Report 5s come from the macro keys when pressed by mouse */ else if (data[0] == 5) { jitterable = data[1] & 0x1c; - p = (data[1] & 0x01) != 0 ? 1 : 0; - dv = (data[1] & 0x02) != 0 ? 1 : 0; + dv = (data[1] & 0x01) != 0 ? 1 : 0; + p = (data[1] & 0x02) != 0 ? 1 : 0; left = (data[1]& aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0; right = (data[1] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0; middle = (data[1] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0; - macro = data[3]; + macro = dv && p && left && !(data[3] & 1) ? (data[3] >> 1) : 0; - if (dv != 0) { - /* If we've not already sent a tool_button_?? code, do - * so now. Then set FIRED_BIT so it won't be resent unless - * the user forces FIRED_BIT off. + if (dv) { + /* If the selected tool changed, reset the old + * tool key, and set the new one. */ - if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) { - input_report_key(inputdev, - TOOL_BUTTON(aiptek->curSetting.toolMode), - 1); - aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; - } - - if (p != 0) { - input_report_key(inputdev, BTN_LEFT, left); - input_report_key(inputdev, BTN_MIDDLE, middle); - input_report_key(inputdev, BTN_RIGHT, right); + if (aiptek->previousToolMode != + aiptek->curSetting.toolMode) { + input_report_key(inputdev, + aiptek->previousToolMode, 0); + input_report_key(inputdev, + aiptek->curSetting.toolMode, 1); + aiptek->previousToolMode = aiptek->curSetting.toolMode; } + } - /* For safety, we're sending key 'break' codes for the - * neighboring macro keys. - */ - if (macro > 0) { - input_report_key(inputdev, - macroKeyEvents[macro - 1], 0); - } - if (macro < 25) { - input_report_key(inputdev, - macroKeyEvents[macro + 1], 0); - } + if (aiptek->lastMacro != -1 && aiptek->lastMacro != macro) { + input_report_key(inputdev, macroKeyEvents[aiptek->lastMacro], 0); + aiptek->lastMacro = -1; + } + if (macro != -1 && macro != aiptek->lastMacro) { input_report_key(inputdev, macroKeyEvents[macro], 1); - input_report_rel(inputdev, ABS_MISC, - p | AIPTEK_REPORT_TOOL_MOUSE); - input_sync(inputdev); + aiptek->lastMacro = macro; } + + input_report_abs(inputdev, ABS_MISC, + p | AIPTEK_REPORT_TOOL_MOUSE); + input_sync(inputdev); } /* We have no idea which tool can generate a report 6. Theoretically, * neither need to, having been given reports 4 & 5 for such use. @@ -725,15 +766,18 @@ static void aiptek_irq(struct urb *urb) 0); } - /* If we've not already sent a tool_button_?? code, do - * so now. Then set FIRED_BIT so it won't be resent unless - * the user forces FIRED_BIT off. - */ - if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) { + /* If the selected tool changed, reset the old + tool key, and set the new one. + */ + if (aiptek->previousToolMode != + aiptek->curSetting.toolMode) { + input_report_key(inputdev, + aiptek->previousToolMode, 0); input_report_key(inputdev, - TOOL_BUTTON(aiptek->curSetting. - toolMode), 1); - aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT; + aiptek->curSetting.toolMode, + 1); + aiptek->previousToolMode = + aiptek->curSetting.toolMode; } input_report_key(inputdev, macroKeyEvents[macro], 1); @@ -1007,9 +1051,6 @@ static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - return snprintf(buf, PAGE_SIZE, "%dx%d\n", aiptek->inputdev->absmax[ABS_X] + 1, aiptek->inputdev->absmax[ABS_Y] + 1); @@ -1024,117 +1065,35 @@ static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr static DEVICE_ATTR(size, S_IRUGO, show_tabletSize, NULL); /*********************************************************************** - * support routines for the 'product_id' file - */ -static ssize_t show_tabletProductId(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "0x%04x\n", - aiptek->inputdev->id.product); -} - -static DEVICE_ATTR(product_id, S_IRUGO, show_tabletProductId, NULL); - -/*********************************************************************** - * support routines for the 'vendor_id' file - */ -static ssize_t show_tabletVendorId(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev->id.vendor); -} - -static DEVICE_ATTR(vendor_id, S_IRUGO, show_tabletVendorId, NULL); - -/*********************************************************************** - * support routines for the 'vendor' file - */ -static ssize_t show_tabletManufacturer(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - int retval; - - if (aiptek == NULL) - return 0; - - retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->manufacturer); - return retval; -} - -static DEVICE_ATTR(vendor, S_IRUGO, show_tabletManufacturer, NULL); - -/*********************************************************************** - * support routines for the 'product' file - */ -static ssize_t show_tabletProduct(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - int retval; - - if (aiptek == NULL) - return 0; - - retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->product); - return retval; -} - -static DEVICE_ATTR(product, S_IRUGO, show_tabletProduct, NULL); - -/*********************************************************************** * support routines for the 'pointer_mode' file. Note that this file * both displays current setting and allows reprogramming. */ +static struct aiptek_map pointer_mode_map[] = { + { "stylus", AIPTEK_POINTER_ONLY_STYLUS_MODE }, + { "mouse", AIPTEK_POINTER_ONLY_MOUSE_MODE }, + { "either", AIPTEK_POINTER_EITHER_MODE }, + { NULL, AIPTEK_INVALID_VALUE } +}; + static ssize_t show_tabletPointerMode(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.pointerMode) { - case AIPTEK_POINTER_ONLY_STYLUS_MODE: - s = "stylus"; - break; - - case AIPTEK_POINTER_ONLY_MOUSE_MODE: - s = "mouse"; - break; - - case AIPTEK_POINTER_EITHER_MODE: - s = "either"; - break; - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(pointer_mode_map, + aiptek->curSetting.pointerMode)); } static ssize_t store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; + int new_mode = map_str_to_val(pointer_mode_map, buf, count); - if (strcmp(buf, "stylus") == 0) { - aiptek->newSetting.pointerMode = - AIPTEK_POINTER_ONLY_STYLUS_MODE; - } else if (strcmp(buf, "mouse") == 0) { - aiptek->newSetting.pointerMode = AIPTEK_POINTER_ONLY_MOUSE_MODE; - } else if (strcmp(buf, "either") == 0) { - aiptek->newSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE; - } + if (new_mode == AIPTEK_INVALID_VALUE) + return -EINVAL; + + aiptek->newSetting.pointerMode = new_mode; return count; } @@ -1146,44 +1105,32 @@ static DEVICE_ATTR(pointer_mode, * support routines for the 'coordinate_mode' file. Note that this file * both displays current setting and allows reprogramming. */ + +static struct aiptek_map coordinate_mode_map[] = { + { "absolute", AIPTEK_COORDINATE_ABSOLUTE_MODE }, + { "relative", AIPTEK_COORDINATE_RELATIVE_MODE }, + { NULL, AIPTEK_INVALID_VALUE } +}; + static ssize_t show_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.coordinateMode) { - case AIPTEK_COORDINATE_ABSOLUTE_MODE: - s = "absolute"; - break; - - case AIPTEK_COORDINATE_RELATIVE_MODE: - s = "relative"; - break; - - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(coordinate_mode_map, + aiptek->curSetting.coordinateMode)); } static ssize_t store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; + int new_mode = map_str_to_val(coordinate_mode_map, buf, count); - if (strcmp(buf, "absolute") == 0) { - aiptek->newSetting.pointerMode = - AIPTEK_COORDINATE_ABSOLUTE_MODE; - } else if (strcmp(buf, "relative") == 0) { - aiptek->newSetting.pointerMode = - AIPTEK_COORDINATE_RELATIVE_MODE; - } + if (new_mode == AIPTEK_INVALID_VALUE) + return -EINVAL; + + aiptek->newSetting.coordinateMode = new_mode; return count; } @@ -1195,73 +1142,37 @@ static DEVICE_ATTR(coordinate_mode, * support routines for the 'tool_mode' file. Note that this file * both displays current setting and allows reprogramming. */ + +static struct aiptek_map tool_mode_map[] = { + { "mouse", AIPTEK_TOOL_BUTTON_MOUSE_MODE }, + { "eraser", AIPTEK_TOOL_BUTTON_ERASER_MODE }, + { "pencil", AIPTEK_TOOL_BUTTON_PENCIL_MODE }, + { "pen", AIPTEK_TOOL_BUTTON_PEN_MODE }, + { "brush", AIPTEK_TOOL_BUTTON_BRUSH_MODE }, + { "airbrush", AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE }, + { "lens", AIPTEK_TOOL_BUTTON_LENS_MODE }, + { NULL, AIPTEK_INVALID_VALUE } +}; + static ssize_t show_tabletToolMode(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (TOOL_BUTTON(aiptek->curSetting.toolMode)) { - case AIPTEK_TOOL_BUTTON_MOUSE_MODE: - s = "mouse"; - break; - - case AIPTEK_TOOL_BUTTON_ERASER_MODE: - s = "eraser"; - break; - - case AIPTEK_TOOL_BUTTON_PENCIL_MODE: - s = "pencil"; - break; - - case AIPTEK_TOOL_BUTTON_PEN_MODE: - s = "pen"; - break; - - case AIPTEK_TOOL_BUTTON_BRUSH_MODE: - s = "brush"; - break; - - case AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE: - s = "airbrush"; - break; - - case AIPTEK_TOOL_BUTTON_LENS_MODE: - s = "lens"; - break; - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(tool_mode_map, + aiptek->curSetting.toolMode)); } static ssize_t store_tabletToolMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; + int new_mode = map_str_to_val(tool_mode_map, buf, count); - if (strcmp(buf, "mouse") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_MOUSE_MODE; - } else if (strcmp(buf, "eraser") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_ERASER_MODE; - } else if (strcmp(buf, "pencil") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PENCIL_MODE; - } else if (strcmp(buf, "pen") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE; - } else if (strcmp(buf, "brush") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_BRUSH_MODE; - } else if (strcmp(buf, "airbrush") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE; - } else if (strcmp(buf, "lens") == 0) { - aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_LENS_MODE; - } + if (new_mode == AIPTEK_INVALID_VALUE) + return -EINVAL; + aiptek->newSetting.toolMode = new_mode; return count; } @@ -1277,9 +1188,6 @@ static ssize_t show_tabletXtilt(struct device *dev, struct device_attribute *att { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - if (aiptek->curSetting.xTilt == AIPTEK_TILT_DISABLE) { return snprintf(buf, PAGE_SIZE, "disable\n"); } else { @@ -1294,9 +1202,6 @@ store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char struct aiptek *aiptek = dev_get_drvdata(dev); int x; - if (aiptek == NULL) - return 0; - if (strcmp(buf, "disable") == 0) { aiptek->newSetting.xTilt = AIPTEK_TILT_DISABLE; } else { @@ -1319,9 +1224,6 @@ static ssize_t show_tabletYtilt(struct device *dev, struct device_attribute *att { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - if (aiptek->curSetting.yTilt == AIPTEK_TILT_DISABLE) { return snprintf(buf, PAGE_SIZE, "disable\n"); } else { @@ -1336,9 +1238,6 @@ store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char struct aiptek *aiptek = dev_get_drvdata(dev); int y; - if (aiptek == NULL) - return 0; - if (strcmp(buf, "disable") == 0) { aiptek->newSetting.yTilt = AIPTEK_TILT_DISABLE; } else { @@ -1361,9 +1260,6 @@ static ssize_t show_tabletJitterDelay(struct device *dev, struct device_attribut { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - return snprintf(buf, PAGE_SIZE, "%d\n", aiptek->curSetting.jitterDelay); } @@ -1372,9 +1268,6 @@ store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - aiptek->newSetting.jitterDelay = (int)simple_strtol(buf, NULL, 10); return count; } @@ -1391,9 +1284,6 @@ static ssize_t show_tabletProgrammableDelay(struct device *dev, struct device_at { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - return snprintf(buf, PAGE_SIZE, "%d\n", aiptek->curSetting.programmableDelay); } @@ -1403,9 +1293,6 @@ store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - aiptek->newSetting.programmableDelay = (int)simple_strtol(buf, NULL, 10); return count; } @@ -1415,23 +1302,6 @@ static DEVICE_ATTR(delay, show_tabletProgrammableDelay, store_tabletProgrammableDelay); /*********************************************************************** - * support routines for the 'input_path' file. Note that this file - * only displays current setting. - */ -static ssize_t show_tabletInputDevice(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - - return snprintf(buf, PAGE_SIZE, "/dev/input/%s\n", - aiptek->features.inputPath); -} - -static DEVICE_ATTR(input_path, S_IRUGO, show_tabletInputDevice, NULL); - -/*********************************************************************** * support routines for the 'event_count' file. Note that this file * only displays current setting. */ @@ -1439,9 +1309,6 @@ static ssize_t show_tabletEventsReceived(struct device *dev, struct device_attri { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - return snprintf(buf, PAGE_SIZE, "%ld\n", aiptek->eventCount); } @@ -1456,9 +1323,6 @@ static ssize_t show_tabletDiagnosticMessage(struct device *dev, struct device_at struct aiptek *aiptek = dev_get_drvdata(dev); char *retMsg; - if (aiptek == NULL) - return 0; - switch (aiptek->diagnostic) { case AIPTEK_DIAGNOSTIC_NA: retMsg = "no errors\n"; @@ -1493,45 +1357,32 @@ static DEVICE_ATTR(diagnostic, S_IRUGO, show_tabletDiagnosticMessage, NULL); * support routines for the 'stylus_upper' file. Note that this file * both displays current setting and allows for setting changing. */ + +static struct aiptek_map stylus_button_map[] = { + { "upper", AIPTEK_STYLUS_UPPER_BUTTON }, + { "lower", AIPTEK_STYLUS_LOWER_BUTTON }, + { NULL, AIPTEK_INVALID_VALUE } +}; + static ssize_t show_tabletStylusUpper(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.stylusButtonUpper) { - case AIPTEK_STYLUS_UPPER_BUTTON: - s = "upper"; - break; - - case AIPTEK_STYLUS_LOWER_BUTTON: - s = "lower"; - break; - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(stylus_button_map, + aiptek->curSetting.stylusButtonUpper)); } static ssize_t store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); + int new_button = map_str_to_val(stylus_button_map, buf, count); - if (aiptek == NULL) - return 0; + if (new_button == AIPTEK_INVALID_VALUE) + return -EINVAL; - if (strcmp(buf, "upper") == 0) { - aiptek->newSetting.stylusButtonUpper = - AIPTEK_STYLUS_UPPER_BUTTON; - } else if (strcmp(buf, "lower") == 0) { - aiptek->newSetting.stylusButtonUpper = - AIPTEK_STYLUS_LOWER_BUTTON; - } + aiptek->newSetting.stylusButtonUpper = new_button; return count; } @@ -1543,45 +1394,26 @@ static DEVICE_ATTR(stylus_upper, * support routines for the 'stylus_lower' file. Note that this file * both displays current setting and allows for setting changing. */ + static ssize_t show_tabletStylusLower(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.stylusButtonLower) { - case AIPTEK_STYLUS_UPPER_BUTTON: - s = "upper"; - break; - - case AIPTEK_STYLUS_LOWER_BUTTON: - s = "lower"; - break; - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(stylus_button_map, + aiptek->curSetting.stylusButtonLower)); } static ssize_t store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); + int new_button = map_str_to_val(stylus_button_map, buf, count); - if (aiptek == NULL) - return 0; + if (new_button == AIPTEK_INVALID_VALUE) + return -EINVAL; - if (strcmp(buf, "upper") == 0) { - aiptek->newSetting.stylusButtonLower = - AIPTEK_STYLUS_UPPER_BUTTON; - } else if (strcmp(buf, "lower") == 0) { - aiptek->newSetting.stylusButtonLower = - AIPTEK_STYLUS_LOWER_BUTTON; - } + aiptek->newSetting.stylusButtonLower = new_button; return count; } @@ -1593,49 +1425,33 @@ static DEVICE_ATTR(stylus_lower, * support routines for the 'mouse_left' file. Note that this file * both displays current setting and allows for setting changing. */ + +static struct aiptek_map mouse_button_map[] = { + { "left", AIPTEK_MOUSE_LEFT_BUTTON }, + { "middle", AIPTEK_MOUSE_MIDDLE_BUTTON }, + { "right", AIPTEK_MOUSE_RIGHT_BUTTON }, + { NULL, AIPTEK_INVALID_VALUE } +}; + static ssize_t show_tabletMouseLeft(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.mouseButtonLeft) { - case AIPTEK_MOUSE_LEFT_BUTTON: - s = "left"; - break; - - case AIPTEK_MOUSE_MIDDLE_BUTTON: - s = "middle"; - break; - - case AIPTEK_MOUSE_RIGHT_BUTTON: - s = "right"; - break; - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(mouse_button_map, + aiptek->curSetting.mouseButtonLeft)); } static ssize_t store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); + int new_button = map_str_to_val(mouse_button_map, buf, count); - if (aiptek == NULL) - return 0; + if (new_button == AIPTEK_INVALID_VALUE) + return -EINVAL; - if (strcmp(buf, "left") == 0) { - aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON; - } else if (strcmp(buf, "middle") == 0) { - aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_MIDDLE_BUTTON; - } else if (strcmp(buf, "right") == 0) { - aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_RIGHT_BUTTON; - } + aiptek->newSetting.mouseButtonLeft = new_button; return count; } @@ -1650,48 +1466,22 @@ static DEVICE_ATTR(mouse_left, static ssize_t show_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.mouseButtonMiddle) { - case AIPTEK_MOUSE_LEFT_BUTTON: - s = "left"; - break; - - case AIPTEK_MOUSE_MIDDLE_BUTTON: - s = "middle"; - break; - - case AIPTEK_MOUSE_RIGHT_BUTTON: - s = "right"; - break; - - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(mouse_button_map, + aiptek->curSetting.mouseButtonMiddle)); } static ssize_t store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); + int new_button = map_str_to_val(mouse_button_map, buf, count); - if (aiptek == NULL) - return 0; + if (new_button == AIPTEK_INVALID_VALUE) + return -EINVAL; - if (strcmp(buf, "left") == 0) { - aiptek->newSetting.mouseButtonMiddle = AIPTEK_MOUSE_LEFT_BUTTON; - } else if (strcmp(buf, "middle") == 0) { - aiptek->newSetting.mouseButtonMiddle = - AIPTEK_MOUSE_MIDDLE_BUTTON; - } else if (strcmp(buf, "right") == 0) { - aiptek->newSetting.mouseButtonMiddle = - AIPTEK_MOUSE_RIGHT_BUTTON; - } + aiptek->newSetting.mouseButtonMiddle = new_button; return count; } @@ -1706,47 +1496,22 @@ static DEVICE_ATTR(mouse_middle, static ssize_t show_tabletMouseRight(struct device *dev, struct device_attribute *attr, char *buf) { struct aiptek *aiptek = dev_get_drvdata(dev); - char *s; - - if (aiptek == NULL) - return 0; - - switch (aiptek->curSetting.mouseButtonRight) { - case AIPTEK_MOUSE_LEFT_BUTTON: - s = "left"; - break; - - case AIPTEK_MOUSE_MIDDLE_BUTTON: - s = "middle"; - break; - case AIPTEK_MOUSE_RIGHT_BUTTON: - s = "right"; - break; - - default: - s = "unknown"; - break; - } - return snprintf(buf, PAGE_SIZE, "%s\n", s); + return snprintf(buf, PAGE_SIZE, "%s\n", + map_val_to_str(mouse_button_map, + aiptek->curSetting.mouseButtonRight)); } static ssize_t store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct aiptek *aiptek = dev_get_drvdata(dev); + int new_button = map_str_to_val(mouse_button_map, buf, count); - if (aiptek == NULL) - return 0; + if (new_button == AIPTEK_INVALID_VALUE) + return -EINVAL; - if (strcmp(buf, "left") == 0) { - aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_LEFT_BUTTON; - } else if (strcmp(buf, "middle") == 0) { - aiptek->newSetting.mouseButtonRight = - AIPTEK_MOUSE_MIDDLE_BUTTON; - } else if (strcmp(buf, "right") == 0) { - aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON; - } + aiptek->newSetting.mouseButtonRight = new_button; return count; } @@ -1762,9 +1527,6 @@ static ssize_t show_tabletWheel(struct device *dev, struct device_attribute *att { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - if (aiptek->curSetting.wheel == AIPTEK_WHEEL_DISABLE) { return snprintf(buf, PAGE_SIZE, "disable\n"); } else { @@ -1778,9 +1540,6 @@ store_tabletWheel(struct device *dev, struct device_attribute *attr, const char { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - aiptek->newSetting.wheel = (int)simple_strtol(buf, NULL, 10); return count; } @@ -1794,11 +1553,6 @@ static DEVICE_ATTR(wheel, */ static ssize_t show_tabletExecute(struct device *dev, struct device_attribute *attr, char *buf) { - struct aiptek *aiptek = dev_get_drvdata(dev); - - if (aiptek == NULL) - return 0; - /* There is nothing useful to display, so a one-line manual * is in order... */ @@ -1811,9 +1565,6 @@ store_tabletExecute(struct device *dev, struct device_attribute *attr, const cha { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - /* We do not care what you write to this file. Merely the action * of writing to this file triggers a tablet reprogramming. */ @@ -1837,9 +1588,6 @@ static ssize_t show_tabletODMCode(struct device *dev, struct device_attribute *a { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.odmCode); } @@ -1853,9 +1601,6 @@ static ssize_t show_tabletModelCode(struct device *dev, struct device_attribute { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.modelCode); } @@ -1869,86 +1614,39 @@ static ssize_t show_firmwareCode(struct device *dev, struct device_attribute *at { struct aiptek *aiptek = dev_get_drvdata(dev); - if (aiptek == NULL) - return 0; - return snprintf(buf, PAGE_SIZE, "%04x\n", aiptek->features.firmwareCode); } static DEVICE_ATTR(firmware_code, S_IRUGO, show_firmwareCode, NULL); -/*********************************************************************** - * This routine removes all existing sysfs files managed by this device - * driver. - */ -static void aiptek_delete_files(struct device *dev) -{ - device_remove_file(dev, &dev_attr_size); - device_remove_file(dev, &dev_attr_product_id); - device_remove_file(dev, &dev_attr_vendor_id); - device_remove_file(dev, &dev_attr_vendor); - device_remove_file(dev, &dev_attr_product); - device_remove_file(dev, &dev_attr_pointer_mode); - device_remove_file(dev, &dev_attr_coordinate_mode); - device_remove_file(dev, &dev_attr_tool_mode); - device_remove_file(dev, &dev_attr_xtilt); - device_remove_file(dev, &dev_attr_ytilt); - device_remove_file(dev, &dev_attr_jitter); - device_remove_file(dev, &dev_attr_delay); - device_remove_file(dev, &dev_attr_input_path); - device_remove_file(dev, &dev_attr_event_count); - device_remove_file(dev, &dev_attr_diagnostic); - device_remove_file(dev, &dev_attr_odm_code); - device_remove_file(dev, &dev_attr_model_code); - device_remove_file(dev, &dev_attr_firmware_code); - device_remove_file(dev, &dev_attr_stylus_lower); - device_remove_file(dev, &dev_attr_stylus_upper); - device_remove_file(dev, &dev_attr_mouse_left); - device_remove_file(dev, &dev_attr_mouse_middle); - device_remove_file(dev, &dev_attr_mouse_right); - device_remove_file(dev, &dev_attr_wheel); - device_remove_file(dev, &dev_attr_execute); -} - -/*********************************************************************** - * This routine creates the sysfs files managed by this device - * driver. - */ -static int aiptek_add_files(struct device *dev) -{ - int ret; +static struct attribute *aiptek_attributes[] = { + &dev_attr_size.attr, + &dev_attr_pointer_mode.attr, + &dev_attr_coordinate_mode.attr, + &dev_attr_tool_mode.attr, + &dev_attr_xtilt.attr, + &dev_attr_ytilt.attr, + &dev_attr_jitter.attr, + &dev_attr_delay.attr, + &dev_attr_event_count.attr, + &dev_attr_diagnostic.attr, + &dev_attr_odm_code.attr, + &dev_attr_model_code.attr, + &dev_attr_firmware_code.attr, + &dev_attr_stylus_lower.attr, + &dev_attr_stylus_upper.attr, + &dev_attr_mouse_left.attr, + &dev_attr_mouse_middle.attr, + &dev_attr_mouse_right.attr, + &dev_attr_wheel.attr, + &dev_attr_execute.attr, + NULL +}; - if ((ret = device_create_file(dev, &dev_attr_size)) || - (ret = device_create_file(dev, &dev_attr_product_id)) || - (ret = device_create_file(dev, &dev_attr_vendor_id)) || - (ret = device_create_file(dev, &dev_attr_vendor)) || - (ret = device_create_file(dev, &dev_attr_product)) || - (ret = device_create_file(dev, &dev_attr_pointer_mode)) || - (ret = device_create_file(dev, &dev_attr_coordinate_mode)) || - (ret = device_create_file(dev, &dev_attr_tool_mode)) || - (ret = device_create_file(dev, &dev_attr_xtilt)) || - (ret = device_create_file(dev, &dev_attr_ytilt)) || - (ret = device_create_file(dev, &dev_attr_jitter)) || - (ret = device_create_file(dev, &dev_attr_delay)) || - (ret = device_create_file(dev, &dev_attr_input_path)) || - (ret = device_create_file(dev, &dev_attr_event_count)) || - (ret = device_create_file(dev, &dev_attr_diagnostic)) || - (ret = device_create_file(dev, &dev_attr_odm_code)) || - (ret = device_create_file(dev, &dev_attr_model_code)) || - (ret = device_create_file(dev, &dev_attr_firmware_code)) || - (ret = device_create_file(dev, &dev_attr_stylus_lower)) || - (ret = device_create_file(dev, &dev_attr_stylus_upper)) || - (ret = device_create_file(dev, &dev_attr_mouse_left)) || - (ret = device_create_file(dev, &dev_attr_mouse_middle)) || - (ret = device_create_file(dev, &dev_attr_mouse_right)) || - (ret = device_create_file(dev, &dev_attr_wheel)) || - (ret = device_create_file(dev, &dev_attr_execute))) { - err("aiptek: killing own sysfs device files\n"); - aiptek_delete_files(dev); - } - return ret; -} +static struct attribute_group aiptek_attribute_group = { + .attrs = aiptek_attributes, +}; /*********************************************************************** * This routine is called when a tablet has been identified. It basically @@ -1961,8 +1659,6 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) struct usb_endpoint_descriptor *endpoint; struct aiptek *aiptek; struct input_dev *inputdev; - struct input_handle *inputhandle; - struct list_head *node, *next; int i; int speeds[] = { 0, AIPTEK_PROGRAMMABLE_DELAY_50, @@ -1984,17 +1680,23 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL); inputdev = input_allocate_device(); - if (!aiptek || !inputdev) + if (!aiptek || !inputdev) { + warn("aiptek: cannot allocate memory or input device"); goto fail1; + } aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH, GFP_ATOMIC, &aiptek->data_dma); - if (!aiptek->data) + if (!aiptek->data) { + warn("aiptek: cannot allocate usb buffer"); goto fail1; + } aiptek->urb = usb_alloc_urb(0, GFP_KERNEL); - if (!aiptek->urb) + if (!aiptek->urb) { + warn("aiptek: cannot allocate urb"); goto fail2; + } aiptek->inputdev = inputdev; aiptek->usbdev = usbdev; @@ -2002,6 +1704,7 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) aiptek->inDelay = 0; aiptek->endDelay = 0; aiptek->previousJitterable = 0; + aiptek->lastMacro = -1; /* Set up the curSettings struct. Said struct contains the current * programmable parameters. The newSetting struct contains changes @@ -2054,36 +1757,23 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) /* Now program the capacities of the tablet, in terms of being * an input device. */ - inputdev->evbit[0] |= BIT(EV_KEY) - | BIT(EV_ABS) - | BIT(EV_REL) - | BIT(EV_MSC); - - inputdev->absbit[0] |= BIT(ABS_MISC); + for (i = 0; i < ARRAY_SIZE(eventTypes); ++i) + __set_bit(eventTypes[i], inputdev->evbit); - inputdev->relbit[0] |= - (BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL) | BIT(REL_MISC)); + for (i = 0; i < ARRAY_SIZE(absEvents); ++i) + __set_bit(absEvents[i], inputdev->absbit); - inputdev->keybit[LONG(BTN_LEFT)] |= - (BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE)); + for (i = 0; i < ARRAY_SIZE(relEvents); ++i) + __set_bit(relEvents[i], inputdev->relbit); - inputdev->keybit[LONG(BTN_DIGI)] |= - (BIT(BTN_TOOL_PEN) | - BIT(BTN_TOOL_RUBBER) | - BIT(BTN_TOOL_PENCIL) | - BIT(BTN_TOOL_AIRBRUSH) | - BIT(BTN_TOOL_BRUSH) | - BIT(BTN_TOOL_MOUSE) | - BIT(BTN_TOOL_LENS) | - BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2)); + __set_bit(MSC_SERIAL, inputdev->mscbit); - inputdev->mscbit[0] = BIT(MSC_SERIAL); + /* Set up key and button codes */ + for (i = 0; i < ARRAY_SIZE(buttonEvents); ++i) + __set_bit(buttonEvents[i], inputdev->keybit); - /* Programming the tablet macro keys needs to be done with a for loop - * as the keycodes are discontiguous. - */ for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i) - set_bit(macroKeyEvents[i], inputdev->keybit); + __set_bit(macroKeyEvents[i], inputdev->keybit); /* * Program the input device coordinate capacities. We do not yet @@ -2134,25 +1824,11 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) } } - /* Register the tablet as an Input Device - */ - err = input_register_device(aiptek->inputdev); - if (err) + /* Murphy says that some day someone will have a tablet that fails the + above test. That's you, Frederic Rodrigo */ + if (i == ARRAY_SIZE(speeds)) { + info("input: Aiptek tried all speeds, no sane response"); goto fail2; - - /* We now will look for the evdev device which is mapped to - * the tablet. The partial name is kept in the link list of - * input_handles associated with this input device. - * What identifies an evdev input_handler is that it begins - * with 'event', continues with a digit, and that in turn - * is mapped to input/eventN. - */ - list_for_each_safe(node, next, &inputdev->h_list) { - inputhandle = to_handle(node); - if (strncmp(inputhandle->name, "event", 5) == 0) { - strcpy(aiptek->features.inputPath, inputhandle->name); - break; - } } /* Associate this driver's struct with the usb interface. @@ -2161,18 +1837,27 @@ aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id) /* Set up the sysfs files */ - aiptek_add_files(&intf->dev); + err = sysfs_create_group(&intf->dev.kobj, &aiptek_attribute_group); + if (err) { + warn("aiptek: cannot create sysfs group err: %d", err); + goto fail3; + } - /* Make sure the evdev module is loaded. Assuming evdev IS a module :-) + /* Register the tablet as an Input Device */ - if (request_module("evdev") != 0) - info("aiptek: error loading 'evdev' module"); - + err = input_register_device(aiptek->inputdev); + if (err) { + warn("aiptek: input_register_device returned err: %d", err); + goto fail4; + } return 0; + fail4: sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group); + fail3: usb_free_urb(aiptek->urb); fail2: usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data, aiptek->data_dma); - fail1: input_free_device(inputdev); + fail1: usb_set_intfdata(intf, NULL); + input_free_device(inputdev); kfree(aiptek); return err; } @@ -2192,7 +1877,7 @@ static void aiptek_disconnect(struct usb_interface *intf) */ usb_kill_urb(aiptek->urb); input_unregister_device(aiptek->inputdev); - aiptek_delete_files(&intf->dev); + sysfs_remove_group(&intf->dev.kobj, &aiptek_attribute_group); usb_free_urb(aiptek->urb); usb_buffer_free(interface_to_usbdev(intf), AIPTEK_PACKET_LENGTH, diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h index ef01a807ec0..6542edb6f76 100644 --- a/drivers/input/tablet/wacom.h +++ b/drivers/input/tablet/wacom.h @@ -11,7 +11,7 @@ * Copyright (c) 2000 Daniel Egger <egger@suse.de> * Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com> * Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be> - * Copyright (c) 2002-2006 Ping Cheng <pingc@wacom.com> + * Copyright (c) 2002-2007 Ping Cheng <pingc@wacom.com> * * ChangeLog: * v0.1 (vp) - Initial release @@ -62,8 +62,9 @@ * - Minor data report fix * v1.46 (pc) - Split wacom.c into wacom_sys.c and wacom_wac.c, * - where wacom_sys.c deals with system specific code, - * - and wacom_wac.c deals with Wacom specific code + * - and wacom_wac.c deals with Wacom specific code * - Support Intuos3 4x6 + * v1.47 (pc) - Added support for Bamboo */ /* @@ -84,7 +85,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v1.46" +#define DRIVER_VERSION "v1.47" #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>" #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver" #define DRIVER_LICENSE "GPL" @@ -123,6 +124,7 @@ extern void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wa extern void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac); extern void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac); extern void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac); +extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac); extern __u16 wacom_le16_to_cpu(unsigned char *data); extern __u16 wacom_be16_to_cpu(unsigned char *data); extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id); diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 83bddef6606..064e123c9b7 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -138,6 +138,12 @@ static void wacom_close(struct input_dev *dev) usb_kill_urb(wacom->irq); } +void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac) +{ + input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_1) | BIT(BTN_5); + input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); +} + void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { input_dev->evbit[0] |= BIT(EV_MSC); diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 7661f03a2db..fc03ba256f4 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -178,7 +178,8 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) case 2: /* Mouse with wheel */ wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04); - if (wacom->features->type == WACOM_G4) { + if (wacom->features->type == WACOM_G4 || + wacom->features->type == WACOM_MO) { rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03); wacom_report_rel(wcombo, REL_WHEEL, -rw); } else @@ -190,7 +191,8 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) id = CURSOR_DEVICE_ID; wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01); wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02); - if (wacom->features->type == WACOM_G4) + if (wacom->features->type == WACOM_G4 || + wacom->features->type == WACOM_MO) wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f); else wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f); @@ -226,7 +228,8 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) } /* send pad data */ - if (wacom->features->type == WACOM_G4) { + switch (wacom->features->type) { + case WACOM_G4: if (data[7] & 0xf8) { wacom_input_sync(wcombo); /* sync last event */ wacom->id[1] = 1; @@ -247,6 +250,33 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo) wacom_report_abs(wcombo, ABS_MISC, 0); wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0); } + break; + case WACOM_MO: + if ((data[7] & 0xf8) || (data[8] & 0x80)) { + wacom_input_sync(wcombo); /* sync last event */ + wacom->id[1] = 1; + wacom->serial[1] = (data[7] & 0xf8); + wacom_report_key(wcombo, BTN_0, (data[7] & 0x08)); + wacom_report_key(wcombo, BTN_1, (data[7] & 0x20)); + wacom_report_key(wcombo, BTN_4, (data[7] & 0x10)); + wacom_report_key(wcombo, BTN_5, (data[7] & 0x40)); + wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f)); + wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0); + wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID); + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0); + } else if (wacom->id[1]) { + wacom_input_sync(wcombo); /* sync last event */ + wacom->id[1] = 0; + wacom_report_key(wcombo, BTN_0, (data[7] & 0x08)); + wacom_report_key(wcombo, BTN_1, (data[7] & 0x20)); + wacom_report_key(wcombo, BTN_4, (data[7] & 0x10)); + wacom_report_key(wcombo, BTN_5, (data[7] & 0x40)); + wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f)); + wacom_report_key(wcombo, BTN_TOOL_FINGER, 0); + wacom_report_abs(wcombo, ABS_MISC, 0); + wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0); + } + break; } return 1; } @@ -331,7 +361,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo) wacom_report_key(wcombo, BTN_EXTRA, 0); wacom_report_abs(wcombo, ABS_THROTTLE, 0); wacom_report_abs(wcombo, ABS_RZ, 0); - } else { + } else { wacom_report_abs(wcombo, ABS_PRESSURE, 0); wacom_report_abs(wcombo, ABS_TILT_X, 0); wacom_report_abs(wcombo, ABS_TILT_Y, 0); @@ -423,9 +453,9 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo) return result-1; /* Only large I3 and I1 & I2 support Lense Cursor */ - if((wacom->tool[idx] == BTN_TOOL_LENS) + if ((wacom->tool[idx] == BTN_TOOL_LENS) && ((wacom->features->type == INTUOS3) - || (wacom->features->type == INTUOS3S))) + || (wacom->features->type == INTUOS3S))) return 0; /* Cintiq doesn't send data when RDY bit isn't set */ @@ -517,6 +547,7 @@ int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo) break; case WACOM_G4: case GRAPHIRE: + case WACOM_MO: return (wacom_graphire_irq(wacom_wac, wcombo)); break; case PTU: @@ -538,6 +569,8 @@ int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo) void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { switch (wacom_wac->features->type) { + case WACOM_MO: + input_dev_mo(input_dev, wacom_wac); case WACOM_G4: input_dev_g4(input_dev, wacom_wac); /* fall through */ @@ -579,6 +612,7 @@ static struct wacom_features wacom_features[] = { { "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE }, { "Wacom Volito2 2x3", 8, 3248, 2320, 511, 63, GRAPHIRE }, { "Wacom PenPartner2", 8, 3250, 2320, 255, 63, GRAPHIRE }, + { "Wacom Bamboo", 9, 14760, 9225, 511, 63, WACOM_MO }, { "Wacom Intuos 4x5", 10, 12700, 10600, 1023, 31, INTUOS }, { "Wacom Intuos 6x8", 10, 20320, 16240, 1023, 31, INTUOS }, { "Wacom Intuos 9x12", 10, 30480, 24060, 1023, 31, INTUOS }, @@ -627,6 +661,7 @@ static struct usb_device_id wacom_ids[] = { { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) }, + { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x65) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) }, { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) }, diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index a5e12e8756d..a302e229bb8 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -25,6 +25,7 @@ enum { INTUOS3, INTUOS3L, CINTIQ, + WACOM_MO, MAX_TYPE }; diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index e5cca9bd040..69371779806 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -177,6 +177,7 @@ config TOUCHSCREEN_USB_COMPOSITE - some other eTurboTouch - Gunze AHL61 - DMC TSC-10/25 + - IRTOUCHSYSTEMS/UNITOP Have a look at <http://linux.chapter7.ch/touchkit/> for a usage description and the required user-space stuff. @@ -219,4 +220,9 @@ config TOUCHSCREEN_USB_DMC_TSC10 bool "DMC TSC-10/25 device support" if EMBEDDED depends on TOUCHSCREEN_USB_COMPOSITE +config TOUCHSCREEN_USB_IRTOUCH + default y + bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + endif diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index e3f22852bd0..b407028ffc5 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -9,6 +9,7 @@ * - eTurboTouch * - Gunze AHL61 * - DMC TSC-10/25 + * - IRTOUCHSYSTEMS/UNITOP * * Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch> * Copyright (C) by Todd E. Johnson (mtouchusb.c) @@ -110,6 +111,7 @@ enum { DEVTYPE_ETURBO, DEVTYPE_GUNZE, DEVTYPE_DMC_TSC10, + DEVTYPE_IRTOUCH, }; static struct usb_device_id usbtouch_devices[] = { @@ -150,6 +152,11 @@ static struct usb_device_id usbtouch_devices[] = { {USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10}, #endif +#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH + {USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH}, + {USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH}, +#endif + {} }; @@ -416,6 +423,21 @@ static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt) /***************************************************************************** + * IRTOUCH Part + */ +#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH +static int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + dev->x = (pkt[3] << 8) | pkt[2]; + dev->y = (pkt[5] << 8) | pkt[4]; + dev->touch = (pkt[1] & 0x03) ? 1 : 0; + + return 1; +} +#endif + + +/***************************************************************************** * the different device descriptors */ static struct usbtouch_device_info usbtouch_dev_info[] = { @@ -504,6 +526,17 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .read_data = dmc_tsc10_read_data, }, #endif + +#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH + [DEVTYPE_IRTOUCH] = { + .min_xc = 0x0, + .max_xc = 0x0fff, + .min_yc = 0x0, + .max_yc = 0x0fff, + .rept_size = 8, + .read_data = irtouch_read_data, + }, +#endif }; diff --git a/drivers/input/tsdev.c b/drivers/input/tsdev.c index 2db364898e1..d2f882e98e5 100644 --- a/drivers/input/tsdev.c +++ b/drivers/input/tsdev.c @@ -109,9 +109,11 @@ struct tsdev { int open; int minor; char name[8]; + struct input_handle handle; wait_queue_head_t wait; struct list_head client_list; - struct input_handle handle; + struct device dev; + int x, y, pressure; struct ts_calibration cal; }; @@ -163,9 +165,13 @@ static int tsdev_open(struct inode *inode, struct file *file) if (!tsdev || !tsdev->exist) return -ENODEV; + get_device(&tsdev->dev); + client = kzalloc(sizeof(struct tsdev_client), GFP_KERNEL); - if (!client) - return -ENOMEM; + if (!client) { + error = -ENOMEM; + goto err_put_tsdev; + } client->tsdev = tsdev; client->raw = (i >= TSDEV_MINORS / 2) ? 1 : 0; @@ -173,19 +179,25 @@ static int tsdev_open(struct inode *inode, struct file *file) if (!tsdev->open++ && tsdev->exist) { error = input_open_device(&tsdev->handle); - if (error) { - list_del(&client->node); - kfree(client); - return error; - } + if (error) + goto err_free_client; } file->private_data = client; return 0; + + err_free_client: + list_del(&client->node); + kfree(client); + err_put_tsdev: + put_device(&tsdev->dev); + return error; } -static void tsdev_free(struct tsdev *tsdev) +static void tsdev_free(struct device *dev) { + struct tsdev *tsdev = container_of(dev, struct tsdev, dev); + tsdev_table[tsdev->minor] = NULL; kfree(tsdev); } @@ -200,12 +212,10 @@ static int tsdev_release(struct inode *inode, struct file *file) list_del(&client->node); kfree(client); - if (!--tsdev->open) { - if (tsdev->exist) - input_close_device(&tsdev->handle); - else - tsdev_free(tsdev); - } + if (!--tsdev->open && tsdev->exist) + input_close_device(&tsdev->handle); + + put_device(&tsdev->dev); return 0; } @@ -361,7 +371,7 @@ static void tsdev_event(struct input_handle *handle, unsigned int type, int x, y, tmp; do_gettimeofday(&time); - client->event[client->head].millisecs = time.tv_usec / 100; + client->event[client->head].millisecs = time.tv_usec / 1000; client->event[client->head].pressure = tsdev->pressure; x = tsdev->x; @@ -388,8 +398,6 @@ static int tsdev_connect(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id) { struct tsdev *tsdev; - struct class_device *cdev; - dev_t devt; int minor, delta; int error; @@ -407,14 +415,13 @@ static int tsdev_connect(struct input_handler *handler, struct input_dev *dev, INIT_LIST_HEAD(&tsdev->client_list); init_waitqueue_head(&tsdev->wait); - sprintf(tsdev->name, "ts%d", minor); - tsdev->exist = 1; tsdev->minor = minor; tsdev->handle.dev = dev; tsdev->handle.name = tsdev->name; tsdev->handle.handler = handler; tsdev->handle.private = tsdev; + snprintf(tsdev->name, sizeof(tsdev->name), "ts%d", minor); /* Precompute the rough calibration matrix */ delta = dev->absmax [ABS_X] - dev->absmin [ABS_X] + 1; @@ -429,36 +436,30 @@ static int tsdev_connect(struct input_handler *handler, struct input_dev *dev, tsdev->cal.yscale = (yres << 8) / delta; tsdev->cal.ytrans = - ((dev->absmin [ABS_Y] * tsdev->cal.yscale) >> 8); - tsdev_table[minor] = tsdev; - - devt = MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor), + snprintf(tsdev->dev.bus_id, sizeof(tsdev->dev.bus_id), + "ts%d", minor); + tsdev->dev.class = &input_class; + tsdev->dev.parent = &dev->dev; + tsdev->dev.devt = MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + minor); + tsdev->dev.release = tsdev_free; + device_initialize(&tsdev->dev); - cdev = class_device_create(&input_class, &dev->cdev, devt, - dev->cdev.dev, tsdev->name); - if (IS_ERR(cdev)) { - error = PTR_ERR(cdev); - goto err_free_tsdev; - } + tsdev_table[minor] = tsdev; - /* temporary symlink to keep userspace happy */ - error = sysfs_create_link(&input_class.subsys.kobj, - &cdev->kobj, tsdev->name); + error = device_add(&tsdev->dev); if (error) - goto err_cdev_destroy; + goto err_free_tsdev; error = input_register_handle(&tsdev->handle); if (error) - goto err_remove_link; + goto err_delete_tsdev; return 0; - err_remove_link: - sysfs_remove_link(&input_class.subsys.kobj, tsdev->name); - err_cdev_destroy: - class_device_destroy(&input_class, devt); + err_delete_tsdev: + device_del(&tsdev->dev); err_free_tsdev: - tsdev_table[minor] = NULL; - kfree(tsdev); + put_device(&tsdev->dev); return error; } @@ -468,10 +469,8 @@ static void tsdev_disconnect(struct input_handle *handle) struct tsdev_client *client; input_unregister_handle(handle); + device_del(&tsdev->dev); - sysfs_remove_link(&input_class.subsys.kobj, tsdev->name); - class_device_destroy(&input_class, - MKDEV(INPUT_MAJOR, TSDEV_MINOR_BASE + tsdev->minor)); tsdev->exist = 0; if (tsdev->open) { @@ -479,8 +478,9 @@ static void tsdev_disconnect(struct input_handle *handle) list_for_each_entry(client, &tsdev->client_list, node) kill_fasync(&client->fasync, SIGIO, POLL_HUP); wake_up_interruptible(&tsdev->wait); - } else - tsdev_free(tsdev); + } + + put_device(&tsdev->dev); } static const struct input_device_id tsdev_ids[] = { |