aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/sleep/main.c5
-rw-r--r--drivers/acpi/sleep/proc.c5
-rw-r--r--drivers/ata/ahci.c23
-rw-r--r--drivers/ata/libata-sff.c30
-rw-r--r--drivers/ata/sata_mv.c2
-rw-r--r--drivers/ata/sata_sil24.c1
-rw-r--r--drivers/ata/sata_uli.c1
-rw-r--r--drivers/auxdisplay/Kconfig2
-rw-r--r--drivers/auxdisplay/cfag12864b.c4
-rw-r--r--drivers/auxdisplay/cfag12864bfb.c4
-rw-r--r--drivers/auxdisplay/ks0108.c4
-rw-r--r--drivers/base/node.c4
-rw-r--r--drivers/block/cciss.c70
-rw-r--r--drivers/gpio/Kconfig14
-rw-r--r--drivers/gpio/pca953x.c2
-rw-r--r--drivers/hwmon/hdaps.c6
-rw-r--r--drivers/ide/arm/palm_bk3710.c38
-rw-r--r--drivers/ide/ide-probe.c10
-rw-r--r--drivers/ide/ide.c24
-rw-r--r--drivers/ide/pci/it8213.c3
-rw-r--r--drivers/ide/pci/ns87415.c6
-rw-r--r--drivers/infiniband/hw/cxgb3/iwch_provider.c4
-rw-r--r--drivers/md/raid5.c7
-rw-r--r--drivers/mmc/host/pxamci.c13
-rw-r--r--drivers/mmc/host/sdhci.c34
-rw-r--r--drivers/pci/quirks.c1
-rw-r--r--drivers/rtc/interface.c102
-rw-r--r--drivers/rtc/rtc-x1205.c111
-rw-r--r--drivers/serial/serial_core.c4
-rw-r--r--drivers/spi/spidev.c10
-rw-r--r--drivers/usb/class/cdc-acm.c3
-rw-r--r--drivers/usb/core/hcd.c47
-rw-r--r--drivers/usb/core/hcd.h2
-rw-r--r--drivers/usb/core/hub.c24
-rw-r--r--drivers/usb/host/ehci.h19
-rw-r--r--drivers/usb/host/ohci-at91.c1
-rw-r--r--drivers/usb/host/ohci-au1xxx.c1
-rw-r--r--drivers/usb/host/ohci-ep93xx.c1
-rw-r--r--drivers/usb/host/ohci-hcd.c15
-rw-r--r--drivers/usb/host/ohci-hub.c53
-rw-r--r--drivers/usb/host/ohci-lh7a404.c1
-rw-r--r--drivers/usb/host/ohci-omap.c1
-rw-r--r--drivers/usb/host/ohci-pci.c1
-rw-r--r--drivers/usb/host/ohci-pnx4008.c1
-rw-r--r--drivers/usb/host/ohci-pnx8550.c1
-rw-r--r--drivers/usb/host/ohci-ppc-of.c1
-rw-r--r--drivers/usb/host/ohci-ppc-soc.c1
-rw-r--r--drivers/usb/host/ohci-ps3.c1
-rw-r--r--drivers/usb/host/ohci-pxa27x.c1
-rw-r--r--drivers/usb/host/ohci-q.c12
-rw-r--r--drivers/usb/host/ohci-s3c2410.c1
-rw-r--r--drivers/usb/host/ohci-sa1111.c1
-rw-r--r--drivers/usb/host/ohci-sh.c1
-rw-r--r--drivers/usb/host/ohci-sm501.c1
-rw-r--r--drivers/usb/host/ohci-ssb.c1
-rw-r--r--drivers/usb/host/u132-hcd.c11
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.c1
-rw-r--r--drivers/usb/serial/ftdi_sio.h3
-rw-r--r--drivers/usb/serial/ipaq.c7
-rw-r--r--drivers/usb/serial/option.c1
-rw-r--r--drivers/usb/serial/pl2303.c1
-rw-r--r--drivers/usb/serial/pl2303.h1
-rw-r--r--drivers/usb/storage/unusual_devs.h8
-rw-r--r--drivers/video/Kconfig3
-rw-r--r--drivers/video/fsl-diu-fb.c25
-rw-r--r--drivers/video/w100fb.c1
67 files changed, 557 insertions, 243 deletions
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index c3b0cd88d09..495c63a3e0a 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -36,9 +36,8 @@ static int acpi_sleep_prepare(u32 acpi_state)
if (!acpi_wakeup_address) {
return -EFAULT;
}
- acpi_set_firmware_waking_vector((acpi_physical_address)
- virt_to_phys((void *)
- acpi_wakeup_address));
+ acpi_set_firmware_waking_vector(
+ (acpi_physical_address)acpi_wakeup_address);
}
ACPI_FLUSH_CPU_CACHE();
diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c
index 224c57c0338..4ebbba2b6b1 100644
--- a/drivers/acpi/sleep/proc.c
+++ b/drivers/acpi/sleep/proc.c
@@ -315,8 +315,11 @@ acpi_system_write_alarm(struct file *file,
cmos_bcd_write(day, acpi_gbl_FADT.day_alarm, rtc_control);
if (acpi_gbl_FADT.month_alarm)
cmos_bcd_write(mo, acpi_gbl_FADT.month_alarm, rtc_control);
- if (acpi_gbl_FADT.century)
+ if (acpi_gbl_FADT.century) {
+ if (adjust)
+ yr += cmos_bcd_read(acpi_gbl_FADT.century, rtc_control) * 100;
cmos_bcd_write(yr / 100, acpi_gbl_FADT.century, rtc_control);
+ }
/* enable the rtc alarm interrupt */
rtc_control |= RTC_AIE;
CMOS_WRITE(rtc_control, RTC_CONTROL);
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6a4a2a25d97..5e6468a7ca4 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1777,7 +1777,7 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
struct ahci_host_priv *hpriv;
unsigned int i, handled = 0;
void __iomem *mmio;
- u32 irq_stat, irq_ack = 0;
+ u32 irq_stat, irq_masked;
VPRINTK("ENTER\n");
@@ -1786,16 +1786,17 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
/* sigh. 0xffffffff is a valid return from h/w */
irq_stat = readl(mmio + HOST_IRQ_STAT);
- irq_stat &= hpriv->port_map;
if (!irq_stat)
return IRQ_NONE;
+ irq_masked = irq_stat & hpriv->port_map;
+
spin_lock(&host->lock);
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap;
- if (!(irq_stat & (1 << i)))
+ if (!(irq_masked & (1 << i)))
continue;
ap = host->ports[i];
@@ -1809,14 +1810,20 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
"interrupt on disabled port %u\n", i);
}
- irq_ack |= (1 << i);
- }
-
- if (irq_ack) {
- writel(irq_ack, mmio + HOST_IRQ_STAT);
handled = 1;
}
+ /* HOST_IRQ_STAT behaves as level triggered latch meaning that
+ * it should be cleared after all the port events are cleared;
+ * otherwise, it will raise a spurious interrupt after each
+ * valid one. Please read section 10.6.2 of ahci 1.1 for more
+ * information.
+ *
+ * Also, use the unmasked value to clear interrupt as spurious
+ * pending event on a dummy port might cause screaming IRQ.
+ */
+ writel(irq_stat, mmio + HOST_IRQ_STAT);
+
spin_unlock(&host->lock);
VPRINTK("EXIT\n");
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 215d18672a5..c0908c22548 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1094,6 +1094,7 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
u8 status, int in_wq)
{
+ struct ata_eh_info *ehi = &ap->link.eh_info;
unsigned long flags = 0;
int poll_next;
@@ -1125,9 +1126,12 @@ fsm_start:
if (likely(status & (ATA_ERR | ATA_DF)))
/* device stops HSM for abort/error */
qc->err_mask |= AC_ERR_DEV;
- else
+ else {
/* HSM violation. Let EH handle this */
+ ata_ehi_push_desc(ehi,
+ "ST_FIRST: !(DRQ|ERR|DF)");
qc->err_mask |= AC_ERR_HSM;
+ }
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1146,9 +1150,9 @@ fsm_start:
* the CDB.
*/
if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
- ata_port_printk(ap, KERN_WARNING,
- "DRQ=1 with device error, "
- "dev_stat 0x%X\n", status);
+ ata_ehi_push_desc(ehi, "ST_FIRST: "
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1205,9 +1209,9 @@ fsm_start:
* let the EH abort the command or reset the device.
*/
if (unlikely(status & (ATA_ERR | ATA_DF))) {
- ata_port_printk(ap, KERN_WARNING, "DRQ=1 with "
- "device error, dev_stat 0x%X\n",
- status);
+ ata_ehi_push_desc(ehi, "ST-ATAPI: "
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1226,13 +1230,17 @@ fsm_start:
if (likely(status & (ATA_ERR | ATA_DF)))
/* device stops HSM for abort/error */
qc->err_mask |= AC_ERR_DEV;
- else
+ else {
/* HSM violation. Let EH handle this.
* Phantom devices also trigger this
* condition. Mark hint.
*/
+ ata_ehi_push_desc(ehi, "ST-ATA: "
+ "DRQ=1 with device error, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM |
AC_ERR_NODEV_HINT;
+ }
ap->hsm_task_state = HSM_ST_ERR;
goto fsm_start;
@@ -1257,8 +1265,12 @@ fsm_start:
status = ata_wait_idle(ap);
}
- if (status & (ATA_BUSY | ATA_DRQ))
+ if (status & (ATA_BUSY | ATA_DRQ)) {
+ ata_ehi_push_desc(ehi, "ST-ATA: "
+ "BUSY|DRQ persists on ERR|DF, "
+ "dev_stat 0x%X", status);
qc->err_mask |= AC_ERR_HSM;
+ }
/* ata_pio_sectors() might change the
* state to HSM_ST_LAST. so, the state
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 28092bc5014..ad169ffbc4c 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1607,7 +1607,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
* Much of the time, this could just work regardless.
* So for now, just log the incident, and allow the attempt.
*/
- if (limit_warnings && (qc->nbytes / qc->sect_size) > 1) {
+ if (limit_warnings > 0 && (qc->nbytes / qc->sect_size) > 1) {
--limit_warnings;
ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME
": attempting PIO w/multiple DRQ: "
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 8ee6b5b4ede..84ffcc26a74 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -370,6 +370,7 @@ static const struct pci_device_id sil24_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 },
{ PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 },
{ PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 },
+ { PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 },
{ PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 },
{ PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 },
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index f277cea904c..db529b84994 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -83,6 +83,7 @@ static struct ata_port_operations uli_ops = {
.inherits = &ata_bmdma_port_ops,
.scr_read = uli_scr_read,
.scr_write = uli_scr_write,
+ .hardreset = ATA_OP_NULL,
};
static const struct ata_port_info uli_port_info = {
diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index 043353bd060..14b9d5f4c20 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -64,7 +64,7 @@ config KS0108_DELAY
Amount of time the ks0108 should wait between each control write
to the parallel port.
- If your driver seems to miss random writings, increment this.
+ If your LCD seems to miss random writings, increment this.
If you don't know what I'm talking about, ignore it.
diff --git a/drivers/auxdisplay/cfag12864b.c b/drivers/auxdisplay/cfag12864b.c
index 80bb0610538..683509f013a 100644
--- a/drivers/auxdisplay/cfag12864b.c
+++ b/drivers/auxdisplay/cfag12864b.c
@@ -5,7 +5,7 @@
* License: GPLv2
* Depends: ks0108
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-31
*
* This program is free software; you can redistribute it and/or modify
@@ -398,5 +398,5 @@ module_init(cfag12864b_init);
module_exit(cfag12864b_exit);
MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Miguel Ojeda Sandonis <maxextreme@gmail.com>");
+MODULE_AUTHOR("Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>");
MODULE_DESCRIPTION("cfag12864b LCD driver");
diff --git a/drivers/auxdisplay/cfag12864bfb.c b/drivers/auxdisplay/cfag12864bfb.c
index 307c190699e..fe3a865be4e 100644
--- a/drivers/auxdisplay/cfag12864bfb.c
+++ b/drivers/auxdisplay/cfag12864bfb.c
@@ -5,7 +5,7 @@
* License: GPLv2
* Depends: cfag12864b
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-31
*
* This program is free software; you can redistribute it and/or modify
@@ -186,5 +186,5 @@ module_init(cfag12864bfb_init);
module_exit(cfag12864bfb_exit);
MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Miguel Ojeda Sandonis <maxextreme@gmail.com>");
+MODULE_AUTHOR("Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>");
MODULE_DESCRIPTION("cfag12864b LCD framebuffer driver");
diff --git a/drivers/auxdisplay/ks0108.c b/drivers/auxdisplay/ks0108.c
index e6c3646ef18..5b93852392b 100644
--- a/drivers/auxdisplay/ks0108.c
+++ b/drivers/auxdisplay/ks0108.c
@@ -5,7 +5,7 @@
* License: GPLv2
* Depends: parport
*
- * Author: Copyright (C) Miguel Ojeda Sandonis <maxextreme@gmail.com>
+ * Author: Copyright (C) Miguel Ojeda Sandonis
* Date: 2006-10-31
*
* This program is free software; you can redistribute it and/or modify
@@ -173,6 +173,6 @@ module_init(ks0108_init);
module_exit(ks0108_exit);
MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Miguel Ojeda Sandonis <maxextreme@gmail.com>");
+MODULE_AUTHOR("Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>");
MODULE_DESCRIPTION("ks0108 LCD Controller driver");
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 39f3d1b3a21..0f867a08333 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -84,8 +84,8 @@ static ssize_t node_read_meminfo(struct sys_device * dev, char * buf)
nid, K(i.totalram),
nid, K(i.freeram),
nid, K(i.totalram - i.freeram),
- nid, node_page_state(nid, NR_ACTIVE),
- nid, node_page_state(nid, NR_INACTIVE),
+ nid, K(node_page_state(nid, NR_ACTIVE)),
+ nid, K(node_page_state(nid, NR_INACTIVE)),
#ifdef CONFIG_HIGHMEM
nid, K(i.totalhigh),
nid, K(i.freehigh),
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 5f1e1cc6165..d81632cd7d0 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -106,35 +106,34 @@ MODULE_DEVICE_TABLE(pci, cciss_pci_device_id);
/* board_id = Subsystem Device ID & Vendor ID
* product = Marketing Name for the board
* access = Address of the struct of function pointers
- * nr_cmds = Number of commands supported by controller
*/
static struct board_type products[] = {
- {0x40700E11, "Smart Array 5300", &SA5_access, 512},
- {0x40800E11, "Smart Array 5i", &SA5B_access, 512},
- {0x40820E11, "Smart Array 532", &SA5B_access, 512},
- {0x40830E11, "Smart Array 5312", &SA5B_access, 512},
- {0x409A0E11, "Smart Array 641", &SA5_access, 512},
- {0x409B0E11, "Smart Array 642", &SA5_access, 512},
- {0x409C0E11, "Smart Array 6400", &SA5_access, 512},
- {0x409D0E11, "Smart Array 6400 EM", &SA5_access, 512},
- {0x40910E11, "Smart Array 6i", &SA5_access, 512},
- {0x3225103C, "Smart Array P600", &SA5_access, 512},
- {0x3223103C, "Smart Array P800", &SA5_access, 512},
- {0x3234103C, "Smart Array P400", &SA5_access, 512},
- {0x3235103C, "Smart Array P400i", &SA5_access, 512},
- {0x3211103C, "Smart Array E200i", &SA5_access, 120},
- {0x3212103C, "Smart Array E200", &SA5_access, 120},
- {0x3213103C, "Smart Array E200i", &SA5_access, 120},
- {0x3214103C, "Smart Array E200i", &SA5_access, 120},
- {0x3215103C, "Smart Array E200i", &SA5_access, 120},
- {0x3237103C, "Smart Array E500", &SA5_access, 512},
- {0x323D103C, "Smart Array P700m", &SA5_access, 512},
- {0x3241103C, "Smart Array P212", &SA5_access, 384},
- {0x3243103C, "Smart Array P410", &SA5_access, 384},
- {0x3245103C, "Smart Array P410i", &SA5_access, 384},
- {0x3247103C, "Smart Array P411", &SA5_access, 384},
- {0x3249103C, "Smart Array P812", &SA5_access, 384},
- {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120},
+ {0x40700E11, "Smart Array 5300", &SA5_access},
+ {0x40800E11, "Smart Array 5i", &SA5B_access},
+ {0x40820E11, "Smart Array 532", &SA5B_access},
+ {0x40830E11, "Smart Array 5312", &SA5B_access},
+ {0x409A0E11, "Smart Array 641", &SA5_access},
+ {0x409B0E11, "Smart Array 642", &SA5_access},
+ {0x409C0E11, "Smart Array 6400", &SA5_access},
+ {0x409D0E11, "Smart Array 6400 EM", &SA5_access},
+ {0x40910E11, "Smart Array 6i", &SA5_access},
+ {0x3225103C, "Smart Array P600", &SA5_access},
+ {0x3223103C, "Smart Array P800", &SA5_access},
+ {0x3234103C, "Smart Array P400", &SA5_access},
+ {0x3235103C, "Smart Array P400i", &SA5_access},
+ {0x3211103C, "Smart Array E200i", &SA5_access},
+ {0x3212103C, "Smart Array E200", &SA5_access},
+ {0x3213103C, "Smart Array E200i", &SA5_access},
+ {0x3214103C, "Smart Array E200i", &SA5_access},
+ {0x3215103C, "Smart Array E200i", &SA5_access},
+ {0x3237103C, "Smart Array E500", &SA5_access},
+ {0x323D103C, "Smart Array P700m", &SA5_access},
+ {0x3241103C, "Smart Array P212", &SA5_access},
+ {0x3243103C, "Smart Array P410", &SA5_access},
+ {0x3245103C, "Smart Array P410i", &SA5_access},
+ {0x3247103C, "Smart Array P411", &SA5_access},
+ {0x3249103C, "Smart Array P812", &SA5_access},
+ {0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
/* How long to wait (in milliseconds) for board to go into simple mode */
@@ -3086,11 +3085,20 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
print_cfg_table(c->cfgtable);
#endif /* CCISS_DEBUG */
+ /* Some controllers support Zero Memory Raid (ZMR).
+ * When configured in ZMR mode the number of supported
+ * commands drops to 64. So instead of just setting an
+ * arbitrary value we make the driver a little smarter.
+ * We read the config table to tell us how many commands
+ * are supported on the controller then subtract 4 to
+ * leave a little room for ioctl calls.
+ */
+ c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
for (i = 0; i < ARRAY_SIZE(products); i++) {
if (board_id == products[i].board_id) {
c->product_name = products[i].product_name;
c->access = *(products[i].access);
- c->nr_cmds = products[i].nr_cmds;
+ c->nr_cmds = c->max_commands - 4;
break;
}
}
@@ -3110,7 +3118,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
c->product_name = products[i-1].product_name;
c->access = *(products[i-1].access);
- c->nr_cmds = products[i-1].nr_cmds;
+ c->nr_cmds = c->max_commands - 4;
printk(KERN_WARNING "cciss: This is an unknown "
"Smart Array controller.\n"
"cciss: Please update to the latest driver "
@@ -3546,6 +3554,10 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
for (j = 0; j <= hba[i]->highest_lun; j++)
add_disk(hba[i]->gendisk[j]);
+ /* we must register the controller even if no disks exist */
+ if (hba[i]->highest_lun == -1)
+ add_disk(hba[i]->gendisk[0]);
+
return 1;
clean4:
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index bbd28342e77..008c38ba774 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -28,12 +28,18 @@ config DEBUG_GPIO
comment "I2C GPIO expanders:"
config GPIO_PCA953X
- tristate "PCA953x I/O ports"
+ tristate "PCA953x, PCA955x, and MAX7310 I/O ports"
depends on I2C
help
- Say yes here to support the PCA9534 (8-bit), PCA9535 (16-bit),
- PCA9536 (4-bit), PCA9537 (4-bit), PCA9538 (8-bit), and PCA9539
- (16-bit) I/O ports. These parts are made by NXP and TI.
+ Say yes here to provide access to several register-oriented
+ SMBus I/O expanders, made mostly by NXP or TI. Compatible
+ models include:
+
+ 4 bits: pca9536, pca9537
+
+ 8 bits: max7310, pca9534, pca9538, pca9554, pca9557
+
+ 16 bits: pca9535, pca9539, pca9555
This driver can also be built as a module. If so, the module
will be called pca953x.
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 7e40e8a55ed..a380730b61a 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -33,7 +33,7 @@ static const struct i2c_device_id pca953x_id[] = {
{ "pca9554", 8, },
{ "pca9555", 16, },
{ "pca9557", 8, },
- /* REVISIT several pca955x parts should work here too */
+ { "max7310", 8, },
{ }
};
MODULE_DEVICE_TABLE(i2c, pca953x_id);
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index 26df06f840e..50f22690d61 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -516,17 +516,23 @@ static struct dmi_system_id __initdata hdaps_whitelist[] = {
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"),
HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61i"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61"),
HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"),
HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"),
HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61p"),
HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"),
HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61s"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad Z60m"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61m"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61p"),
{ .ident = NULL }
};
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index cc24803fadf..2f2b4f4cf22 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -76,7 +76,7 @@ struct palm_bk3710_udmatiming {
#include "../ide-timing.h"
-static long ide_palm_clk;
+static unsigned ideclk_period; /* in nanoseconds */
static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
{160, 240}, /* UDMA Mode 0 */
@@ -86,8 +86,6 @@ static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
{85, 60}, /* UDMA Mode 4 */
};
-static struct clk *ideclkp;
-
static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
unsigned int mode)
{
@@ -97,10 +95,10 @@ static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
/* DMA Data Setup */
t0 = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].cycletime,
- ide_palm_clk) - 1;
- tenv = DIV_ROUND_UP(20, ide_palm_clk) - 1;
+ ideclk_period) - 1;
+ tenv = DIV_ROUND_UP(20, ideclk_period) - 1;
trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime,
- ide_palm_clk) - 1;
+ ideclk_period) - 1;
/* udmatim Register */
val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0);
@@ -141,8 +139,8 @@ static void palm_bk3710_setdmamode(void __iomem *base, unsigned int dev,
cycletime = max_t(int, t->cycle, min_cycle);
/* DMA Data Setup */
- t0 = DIV_ROUND_UP(cycletime, ide_palm_clk);
- td = DIV_ROUND_UP(t->active, ide_palm_clk);
+ t0 = DIV_ROUND_UP(cycletime, ideclk_period);
+ td = DIV_ROUND_UP(t->active, ideclk_period);
tkw = t0 - td - 1;
td -= 1;
@@ -168,9 +166,9 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
struct ide_timing *t;
/* PIO Data Setup */
- t0 = DIV_ROUND_UP(cycletime, ide_palm_clk);
+ t0 = DIV_ROUND_UP(cycletime, ideclk_period);
t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active,
- ide_palm_clk);
+ ideclk_period);
t2i = t0 - t2 - 1;
t2 -= 1;
@@ -192,8 +190,8 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
/* TASKFILE Setup */
t = ide_timing_find_mode(XFER_PIO_0 + mode);
- t0 = DIV_ROUND_UP(t->cyc8b, ide_palm_clk);
- t2 = DIV_ROUND_UP(t->act8b, ide_palm_clk);
+ t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
+ t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
t2i = t0 - t2 - 1;
t2 -= 1;
@@ -350,22 +348,22 @@ static const struct ide_port_info __devinitdata palm_bk3710_port_info = {
static int __devinit palm_bk3710_probe(struct platform_device *pdev)
{
- struct clk *clkp;
+ struct clk *clk;
struct resource *mem, *irq;
ide_hwif_t *hwif;
- unsigned long base;
+ unsigned long base, rate;
int i;
hw_regs_t hw;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
- clkp = clk_get(NULL, "IDECLK");
- if (IS_ERR(clkp))
+ clk = clk_get(NULL, "IDECLK");
+ if (IS_ERR(clk))
return -ENODEV;
- ideclkp = clkp;
- clk_enable(ideclkp);
- ide_palm_clk = clk_get_rate(ideclkp)/100000;
- ide_palm_clk = (10000/ide_palm_clk) + 1;
+ clk_enable(clk);
+ rate = clk_get_rate(clk);
+ ideclk_period = 1000000000UL / rate;
+
/* Register the IDE interface with Linux ATA Interface */
memset(&hw, 0, sizeof(hw));
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 380fa0c8cc8..26e68b65b7c 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -646,8 +646,6 @@ static int ide_register_port(ide_hwif_t *hwif)
goto out;
}
- get_device(&hwif->gendev);
-
hwif->portdev = device_create_drvdata(ide_port_class, &hwif->gendev,
MKDEV(0, 0), hwif, hwif->name);
if (IS_ERR(hwif->portdev)) {
@@ -1220,16 +1218,12 @@ static void drive_release_dev (struct device *dev)
complete(&drive->gendev_rel_comp);
}
-#ifndef ide_default_irq
-#define ide_default_irq(irq) 0
-#endif
-
static int hwif_init(ide_hwif_t *hwif)
{
int old_irq;
if (!hwif->irq) {
- hwif->irq = ide_default_irq(hwif->io_ports.data_addr);
+ hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
if (!hwif->irq) {
printk("%s: DISABLED, NO IRQ\n", hwif->name);
return 0;
@@ -1259,7 +1253,7 @@ static int hwif_init(ide_hwif_t *hwif)
* It failed to initialise. Find the default IRQ for
* this port and try that.
*/
- hwif->irq = ide_default_irq(hwif->io_ports.data_addr);
+ hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
if (!hwif->irq) {
printk("%s: Disabled unable to get IRQ %d.\n",
hwif->name, old_irq);
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index c758dcb13b1..300431d080a 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -315,13 +315,14 @@ void ide_unregister(ide_hwif_t *hwif)
BUG_ON(in_interrupt());
BUG_ON(irqs_disabled());
+
mutex_lock(&ide_cfg_mtx);
- spin_lock_irq(&ide_lock);
- if (!hwif->present)
- goto abort;
- __ide_port_unregister_devices(hwif);
- hwif->present = 0;
+ spin_lock_irq(&ide_lock);
+ if (hwif->present) {
+ __ide_port_unregister_devices(hwif);
+ hwif->present = 0;
+ }
spin_unlock_irq(&ide_lock);
ide_proc_unregister_port(hwif);
@@ -351,16 +352,15 @@ void ide_unregister(ide_hwif_t *hwif)
blk_unregister_region(MKDEV(hwif->major, 0), MAX_DRIVES<<PARTN_BITS);
kfree(hwif->sg_table);
unregister_blkdev(hwif->major, hwif->name);
- spin_lock_irq(&ide_lock);
if (hwif->dma_base)
ide_release_dma_engine(hwif);
+ spin_lock_irq(&ide_lock);
/* restore hwif data to pristine status */
ide_init_port_data(hwif, hwif->index);
-
-abort:
spin_unlock_irq(&ide_lock);
+
mutex_unlock(&ide_cfg_mtx);
}
@@ -1094,13 +1094,6 @@ struct bus_type ide_bus_type = {
EXPORT_SYMBOL_GPL(ide_bus_type);
-static void ide_port_class_release(struct device *portdev)
-{
- ide_hwif_t *hwif = dev_get_drvdata(portdev);
-
- put_device(&hwif->gendev);
-}
-
int ide_vlb_clk;
EXPORT_SYMBOL_GPL(ide_vlb_clk);
@@ -1305,7 +1298,6 @@ static int __init ide_init(void)
ret = PTR_ERR(ide_port_class);
goto out_port_class;
}
- ide_port_class->dev_release = ide_port_class_release;
init_ide_data();
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 9053c8771e6..2b71bdf74e7 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -184,8 +184,7 @@ static const struct ide_port_info it8213_chipsets[] __devinitdata = {
static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_setup_pci_device(dev, &it8213_chipsets[id->driver_data]);
- return 0;
+ return ide_setup_pci_device(dev, &it8213_chipsets[id->driver_data]);
}
static const struct pci_device_id it8213_pci_tbl[] = {
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index fec4955f449..a7a41bb8277 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -225,10 +225,6 @@ static int ns87415_dma_setup(ide_drive_t *drive)
return 1;
}
-#ifndef ide_default_irq
-#define ide_default_irq(irq) 0
-#endif
-
static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -288,7 +284,7 @@ static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
}
if (!using_inta)
- hwif->irq = ide_default_irq(hwif->io_ports.data_addr);
+ hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
else if (!hwif->irq && hwif->mate && hwif->mate->irq)
hwif->irq = hwif->mate->irq; /* share IRQ with mate */
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index 8934178a23e..95f82cfb6c5 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -1096,7 +1096,9 @@ static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr, ch
struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev;
PDBG("%s dev 0x%p\n", __func__, dev);
+ rtnl_lock();
lldev->ethtool_ops->get_drvinfo(lldev, &info);
+ rtnl_unlock();
return sprintf(buf, "%s\n", info.fw_version);
}
@@ -1109,7 +1111,9 @@ static ssize_t show_hca(struct device *dev, struct device_attribute *attr,
struct net_device *lldev = iwch_dev->rdev.t3cdev_p->lldev;
PDBG("%s dev 0x%p\n", __func__, dev);
+ rtnl_lock();
lldev->ethtool_ops->get_drvinfo(lldev, &info);
+ rtnl_unlock();
return sprintf(buf, "%s\n", info.driver);
}
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 54c8ee28fcc..3b27df52456 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2017,12 +2017,7 @@ static int __handle_issuing_new_read_requests5(struct stripe_head *sh,
*/
s->uptodate++;
return 0; /* uptodate + compute == disks */
- } else if ((s->uptodate < disks - 1) &&
- test_bit(R5_Insync, &dev->flags)) {
- /* Note: we hold off compute operations while checks are
- * in flight, but we still prefer 'compute' over 'read'
- * hence we only read if (uptodate < * disks-1)
- */
+ } else if (test_bit(R5_Insync, &dev->flags)) {
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantread, &dev->flags);
if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending))
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index 65210fca37e..d89475d3698 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -114,6 +114,7 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
unsigned int nob = data->blocks;
unsigned long long clks;
unsigned int timeout;
+ bool dalgn = 0;
u32 dcmd;
int i;
@@ -152,6 +153,9 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
host->sg_cpu[i].dcmd = dcmd | length;
if (length & 31 && !(data->flags & MMC_DATA_READ))
host->sg_cpu[i].dcmd |= DCMD_ENDIRQEN;
+ /* Not aligned to 8-byte boundary? */
+ if (sg_dma_address(&data->sg[i]) & 0x7)
+ dalgn = 1;
if (data->flags & MMC_DATA_READ) {
host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO;
host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]);
@@ -165,6 +169,15 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
host->sg_cpu[host->dma_len - 1].ddadr = DDADR_STOP;
wmb();
+ /*
+ * The PXA27x DMA controller encounters overhead when working with
+ * unaligned (to 8-byte boundaries) data, so switch on byte alignment
+ * mode only if we have unaligned data.
+ */
+ if (dalgn)
+ DALGN |= (1 << host->dma);
+ else
+ DALGN &= (1 << host->dma);
DDADR(host->dma) = host->sg_dma;
DCSR(host->dma) = DCSR_RUN;
}
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 07c2048b230..b413aa6c246 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -55,6 +55,10 @@ static unsigned int debug_quirks = 0;
#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7)
/* Controller needs to be reset after each request to stay stable */
#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8)
+/* Controller needs voltage and power writes to happen separately */
+#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<9)
+/* Controller has an off-by-one issue with timeout value */
+#define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL (1<<10)
static const struct pci_device_id pci_ids[] __devinitdata = {
{
@@ -115,7 +119,8 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
- SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
+ SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS |
+ SDHCI_QUIRK_BROKEN_DMA,
},
{
@@ -124,7 +129,17 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
- SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
+ SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS |
+ SDHCI_QUIRK_BROKEN_DMA,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_MARVELL,
+ .device = PCI_DEVICE_ID_MARVELL_CAFE_SD,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+ SDHCI_QUIRK_INCR_TIMEOUT_CONTROL,
},
{
@@ -469,6 +484,13 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
break;
}
+ /*
+ * Compensate for an off-by-one error in the CaFe hardware; otherwise,
+ * a too-small count gives us interrupt timeouts.
+ */
+ if ((host->chip->quirks & SDHCI_QUIRK_INCR_TIMEOUT_CONTROL))
+ count++;
+
if (count >= 0xF) {
printk(KERN_WARNING "%s: Too large timeout requested!\n",
mmc_hostname(host->mmc));
@@ -774,6 +796,14 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
BUG();
}
+ /*
+ * At least the CaFe chip gets confused if we set the voltage
+ * and set turn on power at the same time, so set the voltage first.
+ */
+ if ((host->chip->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER))
+ writeb(pwr & ~SDHCI_POWER_ON,
+ host->ioaddr + SDHCI_POWER_CONTROL);
+
writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
out:
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index a3497dc6ebc..338a3f94b4d 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1727,6 +1727,7 @@ static void __init quirk_disable_all_msi(struct pci_dev *dev)
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
/* Disable MSI on chipsets that are known to not support it */
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 7e3ad4f3b34..58b7336640f 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -126,12 +126,25 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
int err;
struct rtc_time before, now;
int first_time = 1;
+ unsigned long t_now, t_alm;
+ enum { none, day, month, year } missing = none;
+ unsigned days;
- /* The lower level RTC driver may not be capable of filling
- * in all fields of the rtc_time struct (eg. rtc-cmos),
- * and so might instead return -1 in some fields.
- * We deal with that here by grabbing a current RTC timestamp
- * and using values from that for any missing (-1) values.
+ /* The lower level RTC driver may return -1 in some fields,
+ * creating invalid alarm->time values, for reasons like:
+ *
+ * - The hardware may not be capable of filling them in;
+ * many alarms match only on time-of-day fields, not
+ * day/month/year calendar data.
+ *
+ * - Some hardware uses illegal values as "wildcard" match
+ * values, which non-Linux firmware (like a BIOS) may try
+ * to set up as e.g. "alarm 15 minutes after each hour".
+ * Linux uses only oneshot alarms.
+ *
+ * When we see that here, we deal with it by using values from
+ * a current RTC timestamp for any missing (-1) values. The
+ * RTC driver prevents "periodic alarm" modes.
*
* But this can be racey, because some fields of the RTC timestamp
* may have wrapped in the interval since we read the RTC alarm,
@@ -174,6 +187,10 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
if (!alarm->enabled)
return 0;
+ /* full-function RTCs won't have such missing fields */
+ if (rtc_valid_tm(&alarm->time) == 0)
+ return 0;
+
/* get the "after" timestamp, to detect wrapped fields */
err = rtc_read_time(rtc, &now);
if (err < 0)
@@ -183,22 +200,85 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
} while ( before.tm_min != now.tm_min
|| before.tm_hour != now.tm_hour
|| before.tm_mon != now.tm_mon
- || before.tm_year != now.tm_year
- || before.tm_isdst != now.tm_isdst);
+ || before.tm_year != now.tm_year);
- /* Fill in any missing alarm fields using the timestamp */
+ /* Fill in the missing alarm fields using the timestamp; we
+ * know there's at least one since alarm->time is invalid.
+ */
if (alarm->time.tm_sec == -1)
alarm->time.tm_sec = now.tm_sec;
if (alarm->time.tm_min == -1)
alarm->time.tm_min = now.tm_min;
if (alarm->time.tm_hour == -1)
alarm->time.tm_hour = now.tm_hour;
- if (alarm->time.tm_mday == -1)
+
+ /* For simplicity, only support date rollover for now */
+ if (alarm->time.tm_mday == -1) {
alarm->time.tm_mday = now.tm_mday;
- if (alarm->time.tm_mon == -1)
+ missing = day;
+ }
+ if (alarm->time.tm_mon == -1) {
alarm->time.tm_mon = now.tm_mon;
- if (alarm->time.tm_year == -1)
+ if (missing == none)
+ missing = month;
+ }
+ if (alarm->time.tm_year == -1) {
alarm->time.tm_year = now.tm_year;
+ if (missing == none)
+ missing = year;
+ }
+
+ /* with luck, no rollover is needed */
+ rtc_tm_to_time(&now, &t_now);
+ rtc_tm_to_time(&alarm->time, &t_alm);
+ if (t_now < t_alm)
+ goto done;
+
+ switch (missing) {
+
+ /* 24 hour rollover ... if it's now 10am Monday, an alarm that
+ * that will trigger at 5am will do so at 5am Tuesday, which
+ * could also be in the next month or year. This is a common
+ * case, especially for PCs.
+ */
+ case day:
+ dev_dbg(&rtc->dev, "alarm rollover: %s\n", "day");
+ t_alm += 24 * 60 * 60;
+ rtc_time_to_tm(t_alm, &alarm->time);
+ break;
+
+ /* Month rollover ... if it's the 31th, an alarm on the 3rd will
+ * be next month. An alarm matching on the 30th, 29th, or 28th
+ * may end up in the month after that! Many newer PCs support
+ * this type of alarm.
+ */
+ case month:
+ dev_dbg(&rtc->dev, "alarm rollover: %s\n", "month");
+ do {
+ if (alarm->time.tm_mon < 11)
+ alarm->time.tm_mon++;
+ else {
+ alarm->time.tm_mon = 0;
+ alarm->time.tm_year++;
+ }
+ days = rtc_month_days(alarm->time.tm_mon,
+ alarm->time.tm_year);
+ } while (days < alarm->time.tm_mday);
+ break;
+
+ /* Year rollover ... easy except for leap years! */
+ case year:
+ dev_dbg(&rtc->dev, "alarm rollover: %s\n", "year");
+ do {
+ alarm->time.tm_year++;
+ } while (!rtc_valid_tm(&alarm->time));
+ break;
+
+ default:
+ dev_warn(&rtc->dev, "alarm rollover not handled\n");
+ }
+
+done:
return 0;
}
EXPORT_SYMBOL_GPL(rtc_read_alarm);
diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c
index eaf55945f21..7dcfba1bbfe 100644
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@@ -71,6 +71,7 @@
#define X1205_SR_RTCF 0x01 /* Clock failure */
#define X1205_SR_WEL 0x02 /* Write Enable Latch */
#define X1205_SR_RWEL 0x04 /* Register Write Enable */
+#define X1205_SR_AL0 0x20 /* Alarm 0 match */
#define X1205_DTR_DTR0 0x01
#define X1205_DTR_DTR1 0x02
@@ -78,6 +79,8 @@
#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
+#define X1205_INT_AL0E 0x20 /* Alarm 0 enable */
+
static struct i2c_driver x1205_driver;
/*
@@ -89,8 +92,8 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
unsigned char reg_base)
{
unsigned char dt_addr[2] = { 0, reg_base };
-
unsigned char buf[8];
+ int i;
struct i2c_msg msgs[] = {
{ client->addr, 0, 2, dt_addr }, /* setup read ptr */
@@ -98,7 +101,7 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
};
/* read date registers */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -110,6 +113,11 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm,
buf[0], buf[1], buf[2], buf[3],
buf[4], buf[5], buf[6], buf[7]);
+ /* Mask out the enable bits if these are alarm registers */
+ if (reg_base < X1205_CCR_BASE)
+ for (i = 0; i <= 4; i++)
+ buf[i] &= 0x7F;
+
tm->tm_sec = BCD2BIN(buf[CCR_SEC]);
tm->tm_min = BCD2BIN(buf[CCR_MIN]);
tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
@@ -138,7 +146,7 @@ static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
};
/* read status register */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -147,10 +155,11 @@ static int x1205_get_status(struct i2c_client *client, unsigned char *sr)
}
static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
- int datetoo, u8 reg_base)
+ int datetoo, u8 reg_base, unsigned char alm_enable)
{
- int i, xfer;
+ int i, xfer, nbytes;
unsigned char buf[8];
+ unsigned char rdata[10] = { 0, reg_base };
static const unsigned char wel[3] = { 0, X1205_REG_SR,
X1205_SR_WEL };
@@ -189,6 +198,11 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100);
}
+ /* If writing alarm registers, set compare bits on registers 0-4 */
+ if (reg_base < X1205_CCR_BASE)
+ for (i = 0; i <= 4; i++)
+ buf[i] |= 0x80;
+
/* this sequence is required to unlock the chip */
if ((xfer = i2c_master_send(client, wel, 3)) != 3) {
dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer);
@@ -200,19 +214,57 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm,
return -EIO;
}
+
/* write register's data */
- for (i = 0; i < (datetoo ? 8 : 3); i++) {
- unsigned char rdata[3] = { 0, reg_base + i, buf[i] };
+ if (datetoo)
+ nbytes = 8;
+ else
+ nbytes = 3;
+ for (i = 0; i < nbytes; i++)
+ rdata[2+i] = buf[i];
+
+ xfer = i2c_master_send(client, rdata, nbytes+2);
+ if (xfer != nbytes+2) {
+ dev_err(&client->dev,
+ "%s: result=%d addr=%02x, data=%02x\n",
+ __func__,
+ xfer, rdata[1], rdata[2]);
+ return -EIO;
+ }
+
+ /* If we wrote to the nonvolatile region, wait 10msec for write cycle*/
+ if (reg_base < X1205_CCR_BASE) {
+ unsigned char al0e[3] = { 0, X1205_REG_INT, 0 };
+
+ msleep(10);
- xfer = i2c_master_send(client, rdata, 3);
+ /* ...and set or clear the AL0E bit in the INT register */
+
+ /* Need to set RWEL again as the write has cleared it */
+ xfer = i2c_master_send(client, rwel, 3);
if (xfer != 3) {
dev_err(&client->dev,
- "%s: xfer=%d addr=%02x, data=%02x\n",
+ "%s: aloe rwel - %d\n",
__func__,
- xfer, rdata[1], rdata[2]);
+ xfer);
+ return -EIO;
+ }
+
+ if (alm_enable)
+ al0e[2] = X1205_INT_AL0E;
+
+ xfer = i2c_master_send(client, al0e, 3);
+ if (xfer != 3) {
+ dev_err(&client->dev,
+ "%s: al0e - %d\n",
+ __func__,
+ xfer);
return -EIO;
}
- };
+
+ /* and wait 10msec again for this write to complete */
+ msleep(10);
+ }
/* disable further writes */
if ((xfer = i2c_master_send(client, diswe, 3)) != 3) {
@@ -230,9 +282,9 @@ static int x1205_fix_osc(struct i2c_client *client)
tm.tm_hour = tm.tm_min = tm.tm_sec = 0;
- if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0)
- dev_err(&client->dev,
- "unable to restart the oscillator\n");
+ err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE, 0);
+ if (err < 0)
+ dev_err(&client->dev, "unable to restart the oscillator\n");
return err;
}
@@ -248,7 +300,7 @@ static int x1205_get_dtrim(struct i2c_client *client, int *trim)
};
/* read dtr register */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -280,7 +332,7 @@ static int x1205_get_atrim(struct i2c_client *client, int *trim)
};
/* read atr register */
- if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) {
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
dev_err(&client->dev, "%s: read error\n", __func__);
return -EIO;
}
@@ -403,14 +455,33 @@ static int x1205_validate_client(struct i2c_client *client)
static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
- return x1205_get_datetime(to_i2c_client(dev),
- &alrm->time, X1205_ALM0_BASE);
+ int err;
+ unsigned char intreg, status;
+ static unsigned char int_addr[2] = { 0, X1205_REG_INT };
+ struct i2c_client *client = to_i2c_client(dev);
+ struct i2c_msg msgs[] = {
+ { client->addr, 0, 2, int_addr }, /* setup read ptr */
+ { client->addr, I2C_M_RD, 1, &intreg }, /* read INT register */
+ };
+
+ /* read interrupt register and status register */
+ if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) {
+ dev_err(&client->dev, "%s: read error\n", __func__);
+ return -EIO;
+ }
+ err = x1205_get_status(client, &status);
+ if (err == 0) {
+ alrm->pending = (status & X1205_SR_AL0) ? 1 : 0;
+ alrm->enabled = (intreg & X1205_INT_AL0E) ? 1 : 0;
+ err = x1205_get_datetime(client, &alrm->time, X1205_ALM0_BASE);
+ }
+ return err;
}
static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
return x1205_set_datetime(to_i2c_client(dev),
- &alrm->time, 1, X1205_ALM0_BASE);
+ &alrm->time, 1, X1205_ALM0_BASE, alrm->enabled);
}
static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm)
@@ -422,7 +493,7 @@ static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm)
static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
return x1205_set_datetime(to_i2c_client(dev),
- tm, 1, X1205_CCR_BASE);
+ tm, 1, X1205_CCR_BASE, 0);
}
static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index c9b64e73c98..42d2e108b67 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1991,7 +1991,9 @@ struct uart_match {
static int serial_match_port(struct device *dev, void *data)
{
struct uart_match *match = data;
- dev_t devt = MKDEV(match->driver->major, match->driver->minor) + match->port->line;
+ struct tty_driver *tty_drv = match->driver->tty_driver;
+ dev_t devt = MKDEV(tty_drv->major, tty_drv->minor_start) +
+ match->port->line;
return dev->devt == devt; /* Actually, only one tty per port */
}
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 799337f7fde..f5b60c70389 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -167,14 +167,14 @@ spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos)
mutex_lock(&spidev->buf_lock);
status = spidev_sync_read(spidev, count);
- if (status == 0) {
+ if (status > 0) {
unsigned long missing;
- missing = copy_to_user(buf, spidev->buffer, count);
- if (count && missing == count)
+ missing = copy_to_user(buf, spidev->buffer, status);
+ if (missing == status)
status = -EFAULT;
else
- status = count - missing;
+ status = status - missing;
}
mutex_unlock(&spidev->buf_lock);
@@ -200,8 +200,6 @@ spidev_write(struct file *filp, const char __user *buf,
missing = copy_from_user(spidev->buffer, buf, count);
if (missing == 0) {
status = spidev_sync_write(spidev, count);
- if (status == 0)
- status = count;
} else
status = -EFAULT;
mutex_unlock(&spidev->buf_lock);
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 63c34043b4d..c3201affa0b 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1125,9 +1125,6 @@ static void stop_data_traffic(struct acm *acm)
for (i = 0; i < acm->rx_buflimit; i++)
usb_kill_urb(acm->ru[i].urb);
- INIT_LIST_HEAD(&acm->filled_read_bufs);
- INIT_LIST_HEAD(&acm->spare_read_bufs);
-
tasklet_enable(&acm->urb_task);
cancel_work_sync(&acm->work);
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 09a53e7f332..42a436478b7 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -924,6 +924,15 @@ static int register_root_hub(struct usb_hcd *hcd)
return retval;
}
+void usb_enable_root_hub_irq (struct usb_bus *bus)
+{
+ struct usb_hcd *hcd;
+
+ hcd = container_of (bus, struct usb_hcd, self);
+ if (hcd->driver->hub_irq_enable && hcd->state != HC_STATE_HALT)
+ hcd->driver->hub_irq_enable (hcd);
+}
+
/*-------------------------------------------------------------------------*/
@@ -1684,19 +1693,30 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum);
irqreturn_t usb_hcd_irq (int irq, void *__hcd)
{
struct usb_hcd *hcd = __hcd;
- int start = hcd->state;
+ unsigned long flags;
+ irqreturn_t rc;
- if (unlikely(start == HC_STATE_HALT ||
- !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
- return IRQ_NONE;
- if (hcd->driver->irq (hcd) == IRQ_NONE)
- return IRQ_NONE;
+ /* IRQF_DISABLED doesn't work correctly with shared IRQs
+ * when the first handler doesn't use it. So let's just
+ * assume it's never used.
+ */
+ local_irq_save(flags);
- set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+ if (unlikely(hcd->state == HC_STATE_HALT ||
+ !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) {
+ rc = IRQ_NONE;
+ } else if (hcd->driver->irq(hcd) == IRQ_NONE) {
+ rc = IRQ_NONE;
+ } else {
+ set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+ if (unlikely(hcd->state == HC_STATE_HALT))
+ usb_hc_died(hcd);
+ rc = IRQ_HANDLED;
+ }
- if (unlikely(hcd->state == HC_STATE_HALT))
- usb_hc_died (hcd);
- return IRQ_HANDLED;
+ local_irq_restore(flags);
+ return rc;
}
/*-------------------------------------------------------------------------*/
@@ -1860,6 +1880,13 @@ int usb_add_hcd(struct usb_hcd *hcd,
/* enable irqs just before we start the controller */
if (hcd->driver->irq) {
+
+ /* IRQF_DISABLED doesn't work as advertised when used together
+ * with IRQF_SHARED. As usb_hcd_irq() will always disable
+ * interrupts we can remove it here.
+ */
+ irqflags &= ~IRQF_DISABLED;
+
snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
hcd->driver->description, hcd->self.busnum);
if ((retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index a0bf5df6cb6..b9de1569b39 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -210,6 +210,8 @@ struct hc_driver {
int (*bus_suspend)(struct usb_hcd *);
int (*bus_resume)(struct usb_hcd *);
int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
+ void (*hub_irq_enable)(struct usb_hcd *);
+ /* Needed only if port-change IRQs are level-triggered */
/* force handover of high-speed port to full-speed companion */
void (*relinquish_port)(struct usb_hcd *, int);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 94789be54ca..4cfe32a16c3 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -713,18 +713,11 @@ static void hub_restart(struct usb_hub *hub, int type)
}
/* Was the power session lost while we were suspended? */
- switch (type) {
- case HUB_RESET_RESUME:
- portstatus = 0;
- portchange = USB_PORT_STAT_C_CONNECTION;
- break;
+ status = hub_port_status(hub, port1, &portstatus, &portchange);
- case HUB_RESET:
- case HUB_RESUME:
- status = hub_port_status(hub, port1,
- &portstatus, &portchange);
- break;
- }
+ /* If the device is gone, khubd will handle it later */
+ if (status == 0 && !(portstatus & USB_PORT_STAT_CONNECTION))
+ continue;
/* For "USB_PERSIST"-enabled children we must
* mark the child device for reset-resume and
@@ -2080,6 +2073,8 @@ int usb_port_resume(struct usb_device *udev)
}
clear_bit(port1, hub->busy_bits);
+ if (!hub->hdev->parent && !hub->busy_bits[0])
+ usb_enable_root_hub_irq(hub->hdev->bus);
if (status == 0)
status = finish_port_resume(udev);
@@ -3009,6 +3004,11 @@ static void hub_events(void)
hub->activating = 0;
+ /* If this is a root hub, tell the HCD it's okay to
+ * re-enable port-change interrupts now. */
+ if (!hdev->parent && !hub->busy_bits[0])
+ usb_enable_root_hub_irq(hdev->bus);
+
loop_autopm:
/* Allow autosuspend if we're not going to run again */
if (list_empty(&hub->event_list))
@@ -3234,6 +3234,8 @@ int usb_reset_device(struct usb_device *udev)
break;
}
clear_bit(port1, parent_hub->busy_bits);
+ if (!parent_hdev->parent && !parent_hub->busy_bits[0])
+ usb_enable_root_hub_irq(parent_hdev->bus);
if (ret < 0)
goto re_enumerate;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 35a03095757..90245fd8bac 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -177,6 +177,15 @@ timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action)
static inline void
timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
{
+ /* Don't override timeouts which shrink or (later) disable
+ * the async ring; just the I/O watchdog. Note that if a
+ * SHRINK were pending, OFF would never be requested.
+ */
+ if (timer_pending(&ehci->watchdog)
+ && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+ & ehci->actions))
+ return;
+
if (!test_and_set_bit (action, &ehci->actions)) {
unsigned long t;
@@ -192,15 +201,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
t = EHCI_SHRINK_JIFFIES;
break;
}
- t += jiffies;
- // all timings except IAA watchdog can be overridden.
- // async queue SHRINK often precedes IAA. while it's ready
- // to go OFF neither can matter, and afterwards the IO
- // watchdog stops unless there's still periodic traffic.
- if (time_before_eq(t, ehci->watchdog.expires)
- && timer_pending (&ehci->watchdog))
- return;
- mod_timer (&ehci->watchdog, t);
+ mod_timer(&ehci->watchdog, t + jiffies);
}
}
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index c96db1153dc..e534f9de0f0 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -261,6 +261,7 @@ static const struct hc_driver ohci_at91_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index 1b9abdba920..f90fe0c7373 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -288,6 +288,7 @@ static const struct hc_driver ohci_au1xxx_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 06aadfb0ec2..5adaf36e47d 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -135,6 +135,7 @@ static struct hc_driver ohci_ep93xx_hc_driver = {
.get_frame_number = ohci_get_frame,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 33f1c1c32ed..a8160d65f32 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1054,7 +1054,7 @@ MODULE_LICENSE ("GPL");
#ifdef CONFIG_MFD_SM501
#include "ohci-sm501.c"
-#define PLATFORM_DRIVER ohci_hcd_sm501_driver
+#define SM501_OHCI_DRIVER ohci_hcd_sm501_driver
#endif
#if !defined(PCI_DRIVER) && \
@@ -1062,6 +1062,7 @@ MODULE_LICENSE ("GPL");
!defined(OF_PLATFORM_DRIVER) && \
!defined(SA1111_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
+ !defined(SM501_OHCI_DRIVER) && \
!defined(SSB_OHCI_DRIVER)
#error "missing bus glue for ohci-hcd"
#endif
@@ -1121,9 +1122,18 @@ static int __init ohci_hcd_mod_init(void)
goto error_ssb;
#endif
+#ifdef SM501_OHCI_DRIVER
+ retval = platform_driver_register(&SM501_OHCI_DRIVER);
+ if (retval < 0)
+ goto error_sm501;
+#endif
+
return retval;
/* Error path */
+#ifdef SM501_OHCI_DRIVER
+ error_sm501:
+#endif
#ifdef SSB_OHCI_DRIVER
error_ssb:
#endif
@@ -1159,6 +1169,9 @@ module_init(ohci_hcd_mod_init);
static void __exit ohci_hcd_mod_exit(void)
{
+#ifdef SM501_OHCI_DRIVER
+ platform_driver_unregister(&SM501_OHCI_DRIVER);
+#endif
#ifdef SSB_OHCI_DRIVER
ssb_driver_unregister(&SSB_OHCI_DRIVER);
#endif
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 79a78029f89..b56739221d1 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -36,6 +36,18 @@
/*-------------------------------------------------------------------------*/
+/* hcd->hub_irq_enable() */
+static void ohci_rhsc_enable (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ spin_lock_irq(&ohci->lock);
+ if (!ohci->autostop)
+ del_timer(&hcd->rh_timer); /* Prevent next poll */
+ ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+ spin_unlock_irq(&ohci->lock);
+}
+
#define OHCI_SCHED_ENABLES \
(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
@@ -362,28 +374,18 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
int any_connected)
{
int poll_rh = 1;
- int rhsc;
- rhsc = ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC;
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_OPER:
- /* If no status changes are pending, enable status-change
- * interrupts.
- */
- if (!rhsc && !changed) {
- rhsc = OHCI_INTR_RHSC;
- ohci_writel(ohci, rhsc, &ohci->regs->intrenable);
- }
-
- /* Keep on polling until we know a device is connected
- * and RHSC is enabled, or until we autostop.
- */
+ /* keep on polling until we know a device is connected
+ * and RHSC is enabled */
if (!ohci->autostop) {
if (any_connected ||
!device_may_wakeup(&ohci_to_hcd(ohci)
->self.root_hub->dev)) {
- if (rhsc)
+ if (ohci_readl(ohci, &ohci->regs->intrenable) &
+ OHCI_INTR_RHSC)
poll_rh = 0;
} else {
ohci->autostop = 1;
@@ -396,13 +398,12 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
ohci->autostop = 0;
ohci->next_statechange = jiffies +
STATECHANGE_DELAY;
- } else if (rhsc && time_after_eq(jiffies,
+ } else if (time_after_eq(jiffies,
ohci->next_statechange)
&& !ohci->ed_rm_list
&& !(ohci->hc_control &
OHCI_SCHED_ENABLES)) {
ohci_rh_suspend(ohci, 1);
- poll_rh = 0;
}
}
break;
@@ -416,12 +417,6 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
else
usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
} else {
- if (!rhsc && (ohci->autostop ||
- ohci_to_hcd(ohci)->self.root_hub->
- do_remote_wakeup))
- ohci_writel(ohci, OHCI_INTR_RHSC,
- &ohci->regs->intrenable);
-
/* everything is idle, no need for polling */
poll_rh = 0;
}
@@ -443,16 +438,12 @@ static inline int ohci_rh_resume(struct ohci_hcd *ohci)
static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
int any_connected)
{
- /* If RHSC is enabled, don't poll */
- if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
- return 0;
+ int poll_rh = 1;
- /* If no status changes are pending, enable status-change interrupts */
- if (!changed) {
- ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
- return 0;
- }
- return 1;
+ /* keep on polling until RHSC is enabled */
+ if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
+ poll_rh = 0;
+ return poll_rh;
}
#endif /* CONFIG_PM */
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 96d14fa1d83..13c12ed2225 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -193,6 +193,7 @@ static const struct hc_driver ohci_lh7a404_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 6859fb5f1d6..3a7c24c0367 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -466,6 +466,7 @@ static const struct hc_driver ohci_omap_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 3bf175d95a2..4696cc912e1 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -327,6 +327,7 @@ static const struct hc_driver ohci_pci_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 664f07ee873..28b458f20cc 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -280,6 +280,7 @@ static const struct hc_driver ohci_pnx4008_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c
index 28467e288a9..605d59cba28 100644
--- a/drivers/usb/host/ohci-pnx8550.c
+++ b/drivers/usb/host/ohci-pnx8550.c
@@ -201,6 +201,7 @@ static const struct hc_driver ohci_pnx8550_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index 50e55db1363..a6725279122 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -72,6 +72,7 @@ static const struct hc_driver ohci_ppc_of_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index cd3398b675b..523c3012557 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -172,6 +172,7 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index bfdeb0d22d0..c1935ae537f 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -68,6 +68,7 @@ static const struct hc_driver ps3_ohci_hc_driver = {
.get_frame_number = ohci_get_frame,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
.start_port_reset = ohci_start_port_reset,
#if defined(CONFIG_PM)
.bus_suspend = ohci_bus_suspend,
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 70b0d4b459e..d4ee27d92be 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -298,6 +298,7 @@ static const struct hc_driver ohci_pxa27x_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c
index 9c9f3b59186..9b547407c93 100644
--- a/drivers/usb/host/ohci-q.c
+++ b/drivers/usb/host/ohci-q.c
@@ -952,6 +952,7 @@ rescan_this:
struct urb *urb;
urb_priv_t *urb_priv;
__hc32 savebits;
+ u32 tdINFO;
td = list_entry (entry, struct td, td_list);
urb = td->urb;
@@ -966,6 +967,17 @@ rescan_this:
savebits = *prev & ~cpu_to_hc32 (ohci, TD_MASK);
*prev = td->hwNextTD | savebits;
+ /* If this was unlinked, the TD may not have been
+ * retired ... so manually save the data toggle.
+ * The controller ignores the value we save for
+ * control and ISO endpoints.
+ */
+ tdINFO = hc32_to_cpup(ohci, &td->hwINFO);
+ if ((tdINFO & TD_T) == TD_T_DATA0)
+ ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_C);
+ else if ((tdINFO & TD_T) == TD_T_DATA1)
+ ed->hwHeadP |= cpu_to_hc32(ohci, ED_C);
+
/* HC may have partly processed this TD */
td_done (ohci, urb, td);
urb_priv->td_cnt++;
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index a73d2ff322e..ead4772f0f2 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -466,6 +466,7 @@ static const struct hc_driver ohci_s3c2410_hc_driver = {
*/
.hub_status_data = ohci_s3c2410_hub_status_data,
.hub_control = ohci_s3c2410_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 99438c65981..0f48f2d9922 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -231,6 +231,7 @@ static const struct hc_driver ohci_sa1111_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index 60f03cc7ec4..e7ee607278f 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -68,6 +68,7 @@ static const struct hc_driver ohci_sh_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index e899a77dfb8..e610698c6b6 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -75,6 +75,7 @@ static const struct hc_driver ohci_sm501_hc_driver = {
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
index c4265caec78..7275186db31 100644
--- a/drivers/usb/host/ohci-ssb.c
+++ b/drivers/usb/host/ohci-ssb.c
@@ -81,6 +81,7 @@ static const struct hc_driver ssb_ohci_hc_driver = {
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index f29307405bb..9b6323f768b 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -2934,6 +2934,16 @@ static int u132_start_port_reset(struct usb_hcd *hcd, unsigned port_num)
return 0;
}
+static void u132_hub_irq_enable(struct usb_hcd *hcd)
+{
+ struct u132 *u132 = hcd_to_u132(hcd);
+ if (u132->going > 1) {
+ dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
+ , u132->going);
+ } else if (u132->going > 0)
+ dev_err(&u132->platform_dev->dev, "device is being removed\n");
+}
+
#ifdef CONFIG_PM
static int u132_bus_suspend(struct usb_hcd *hcd)
@@ -2985,6 +2995,7 @@ static struct hc_driver u132_hc_driver = {
.bus_suspend = u132_bus_suspend,
.bus_resume = u132_bus_resume,
.start_port_reset = u132_start_port_reset,
+ .hub_irq_enable = u132_hub_irq_enable,
};
/*
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index cb7fa0eaf3a..33182f4c226 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3264,8 +3264,6 @@ static void sisusb_disconnect(struct usb_interface *intf)
/* decrement our usage count */
kref_put(&sisusb->kref, sisusb_delete);
-
- dev_info(&sisusb->sisusb_dev->dev, "Disconnected\n");
}
static struct usb_device_id sisusb_table [] = {
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5234e7a3bd2..0ff4a3971e4 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -637,6 +637,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
+ { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 06e0ecabb3e..8302eca893e 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -828,6 +828,9 @@
/* Propox devices */
#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
+/* Rig Expert Ukraine devices */
+#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index ea924dc4849..d9fb3768a2d 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -570,7 +570,12 @@ static struct usb_serial_driver ipaq_device = {
.description = "PocketPC PDA",
.usb_driver = &ipaq_driver,
.id_table = ipaq_id_table,
- .num_ports = 2,
+ /*
+ * some devices have an extra endpoint, which
+ * must be ignored as it would make the core
+ * create a second port which oopses when used
+ */
+ .num_ports = 1,
.open = ipaq_open,
.close = ipaq_close,
.attach = ipaq_startup,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 43cfde83a93..a73420dd052 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -306,6 +306,7 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
+ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 103195abd41..2a0dd1b50dc 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -57,6 +57,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index cff160abb13..6ac3bbcf7a2 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -15,6 +15,7 @@
#define PL2303_PRODUCT_ID_RSAQ3 0xaaa2
#define PL2303_PRODUCT_ID_ALDIGA 0x0611
#define PL2303_PRODUCT_ID_MMX 0x0612
+#define PL2303_PRODUCT_ID_GPRS 0x0609
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 45fe3663fa7..39a7c11795c 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -402,11 +402,19 @@ UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100,
US_FL_IGNORE_RESIDUE ),
#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
+/* CY7C68300 : support atacb */
UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999,
"Cypress",
"Cypress AT2LP",
US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
0),
+
+/* CY7C68310 : support atacb and atacb2 */
+UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999,
+ "Cypress",
+ "Cypress ISD-300LP",
+ US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
+ 0),
#endif
/* Reported by Simon Levitt <simon@whattf.com>
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 002b61b4f0f..e0c5f96b273 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1825,12 +1825,13 @@ config FB_FSL_DIU
config FB_W100
tristate "W100 frame buffer support"
- depends on FB && PXA_SHARPSL
+ depends on FB && ARCH_PXA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
---help---
Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
+ It can also drive the w3220 chip found on iPAQ hx4700.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 0a2785361ca..09d7e22c6fe 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -286,7 +286,7 @@ static struct diu_pool pool;
* rheap and make the furture large allocation fail.
*/
-void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys)
+static void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys)
{
void *virt;
@@ -311,12 +311,12 @@ void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys)
memset(virt, 0, size);
}
- pr_debug("rh virt=%p phys=%lx\n", virt, *phys);
+ pr_debug("rh virt=%p phys=%llx\n", virt, (unsigned long long)*phys);
return virt;
}
-void fsl_diu_free(void *p, unsigned long size)
+static void fsl_diu_free(void *p, unsigned long size)
{
pr_debug("p=%p size=%lu\n", p, size);
@@ -770,7 +770,7 @@ static int map_video_memory(struct fb_info *info)
info->fix.smem_len = info->fix.line_length * info->var.yres_virtual;
pr_debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->fix.smem_len);
info->screen_base = fsl_diu_alloc(info->fix.smem_len, &phys);
- if (info->screen_base == 0) {
+ if (info->screen_base == NULL) {
printk(KERN_ERR "Unable to allocate fb memory\n");
return -ENOMEM;
}
@@ -788,7 +788,7 @@ static int map_video_memory(struct fb_info *info)
static void unmap_video_memory(struct fb_info *info)
{
fsl_diu_free(info->screen_base, info->fix.smem_len);
- info->screen_base = 0;
+ info->screen_base = NULL;
info->fix.smem_start = 0;
info->fix.smem_len = 0;
}
@@ -1158,7 +1158,7 @@ static int init_fbinfo(struct fb_info *info)
return 0;
}
-static int install_fb(struct fb_info *info)
+static int __devinit install_fb(struct fb_info *info)
{
int rc;
struct mfb_info *mfbi = info->par;
@@ -1233,7 +1233,7 @@ static int install_fb(struct fb_info *info)
return 0;
}
-static void __exit uninstall_fb(struct fb_info *info)
+static void uninstall_fb(struct fb_info *info)
{
struct mfb_info *mfbi = info->par;
@@ -1287,7 +1287,7 @@ static int request_irq_local(int irq)
/* Read to clear the status */
status = in_be32(&hw->int_status);
- ret = request_irq(irq, fsl_diu_isr, 0, "diu", 0);
+ ret = request_irq(irq, fsl_diu_isr, 0, "diu", NULL);
if (ret)
pr_info("Request diu IRQ failed.\n");
else {
@@ -1312,7 +1312,7 @@ static void free_irq_local(int irq)
/* Disable all LCDC interrupt */
out_be32(&hw->int_mask, 0x1f);
- free_irq(irq, 0);
+ free_irq(irq, NULL);
}
#ifdef CONFIG_PM
@@ -1353,7 +1353,8 @@ static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
dma_addr_t paddr = 0;
ssize = size + bytes_align;
- buf->vaddr = dma_alloc_coherent(0, ssize, &paddr, GFP_DMA | __GFP_ZERO);
+ buf->vaddr = dma_alloc_coherent(NULL, ssize, &paddr, GFP_DMA |
+ __GFP_ZERO);
if (!buf->vaddr)
return -ENOMEM;
@@ -1371,7 +1372,7 @@ static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
static void free_buf(struct diu_addr *buf, u32 size, u32 bytes_align)
{
- dma_free_coherent(0, size + bytes_align,
+ dma_free_coherent(NULL, size + bytes_align,
buf->vaddr, (buf->paddr - buf->offset));
return;
}
@@ -1411,7 +1412,7 @@ static ssize_t show_monitor(struct device *device,
return diu_ops.show_monitor_port(machine_data->monitor_port, buf);
}
-static int fsl_diu_probe(struct of_device *ofdev,
+static int __devinit fsl_diu_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
struct device_node *np = ofdev->node;
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index 30469bf906e..d0674f1e3f1 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -1003,6 +1003,7 @@ static struct w100_pll_info xtal_14318000[] = {
static struct w100_pll_info xtal_16000000[] = {
/*freq M N_int N_fac tfgoal lock_time */
{ 72, 1, 8, 0, 0xe0, 48}, /* tfgoal guessed */
+ { 80, 1, 9, 0, 0xe0, 13}, /* tfgoal guessed */
{ 95, 1, 10, 7, 0xe0, 38}, /* tfgoal guessed */
{ 96, 1, 11, 0, 0xe0, 36}, /* tfgoal guessed */
{ 0, 0, 0, 0, 0, 0},