diff options
Diffstat (limited to 'fs/ext3/super.c')
| -rw-r--r-- | fs/ext3/super.c | 2539 |
1 files changed, 2539 insertions, 0 deletions
diff --git a/fs/ext3/super.c b/fs/ext3/super.c new file mode 100644 index 00000000000..545b440a2d2 --- /dev/null +++ b/fs/ext3/super.c @@ -0,0 +1,2539 @@ +/* + * linux/fs/ext3/super.c + * + * Copyright (C) 1992, 1993, 1994, 1995 + * Remy Card (card@masi.ibp.fr) + * Laboratoire MASI - Institut Blaise Pascal + * Universite Pierre et Marie Curie (Paris VI) + * + * from + * + * linux/fs/minix/inode.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * Big-endian to little-endian byte-swapping/bitmaps by + * David S. Miller (davem@caip.rutgers.edu), 1995 + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/string.h> +#include <linux/fs.h> +#include <linux/time.h> +#include <linux/jbd.h> +#include <linux/ext3_fs.h> +#include <linux/ext3_jbd.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/parser.h> +#include <linux/smp_lock.h> +#include <linux/buffer_head.h> +#include <linux/vfs.h> +#include <linux/random.h> +#include <linux/mount.h> +#include <linux/namei.h> +#include <linux/quotaops.h> +#include <asm/uaccess.h> +#include "xattr.h" +#include "acl.h" + +static int ext3_load_journal(struct super_block *, struct ext3_super_block *); +static int ext3_create_journal(struct super_block *, struct ext3_super_block *, + int); +static void ext3_commit_super (struct super_block * sb, + struct ext3_super_block * es, + int sync); +static void ext3_mark_recovery_complete(struct super_block * sb, + struct ext3_super_block * es); +static void ext3_clear_journal_err(struct super_block * sb, + struct ext3_super_block * es); +static int ext3_sync_fs(struct super_block *sb, int wait); +static const char *ext3_decode_error(struct super_block * sb, int errno, + char nbuf[16]); +static int ext3_remount (struct super_block * sb, int * flags, char * data); +static int ext3_statfs (struct super_block * sb, struct kstatfs * buf); +static void ext3_unlockfs(struct super_block *sb); +static void ext3_write_super (struct super_block * sb); +static void ext3_write_super_lockfs(struct super_block *sb); + +/* + * Wrappers for journal_start/end. + * + * The only special thing we need to do here is to make sure that all + * journal_end calls result in the superblock being marked dirty, so + * that sync() will call the filesystem's write_super callback if + * appropriate. + */ +handle_t *ext3_journal_start_sb(struct super_block *sb, int nblocks) +{ + journal_t *journal; + + if (sb->s_flags & MS_RDONLY) + return ERR_PTR(-EROFS); + + /* Special case here: if the journal has aborted behind our + * backs (eg. EIO in the commit thread), then we still need to + * take the FS itself readonly cleanly. */ + journal = EXT3_SB(sb)->s_journal; + if (is_journal_aborted(journal)) { + ext3_abort(sb, __FUNCTION__, + "Detected aborted journal"); + return ERR_PTR(-EROFS); + } + + return journal_start(journal, nblocks); +} + +/* + * The only special thing we need to do here is to make sure that all + * journal_stop calls result in the superblock being marked dirty, so + * that sync() will call the filesystem's write_super callback if + * appropriate. + */ +int __ext3_journal_stop(const char *where, handle_t *handle) +{ + struct super_block *sb; + int err; + int rc; + + sb = handle->h_transaction->t_journal->j_private; + err = handle->h_err; + rc = journal_stop(handle); + + if (!err) + err = rc; + if (err) + __ext3_std_error(sb, where, err); + return err; +} + +void ext3_journal_abort_handle(const char *caller, const char *err_fn, + struct buffer_head *bh, handle_t *handle, int err) +{ + char nbuf[16]; + const char *errstr = ext3_decode_error(NULL, err, nbuf); + + if (bh) + BUFFER_TRACE(bh, "abort"); + + if (!handle->h_err) + handle->h_err = err; + + if (is_handle_aborted(handle)) + return; + + printk(KERN_ERR "%s: aborting transaction: %s in %s\n", + caller, errstr, err_fn); + + journal_abort_handle(handle); +} + +/* Deal with the reporting of failure conditions on a filesystem such as + * inconsistencies detected or read IO failures. + * + * On ext2, we can store the error state of the filesystem in the + * superblock. That is not possible on ext3, because we may have other + * write ordering constraints on the superblock which prevent us from + * writing it out straight away; and given that the journal is about to + * be aborted, we can't rely on the current, or future, transactions to + * write out the superblock safely. + * + * We'll just use the journal_abort() error code to record an error in + * the journal instead. On recovery, the journal will compain about + * that error until we've noted it down and cleared it. + */ + +static void ext3_handle_error(struct super_block *sb) +{ + struct ext3_super_block *es = EXT3_SB(sb)->s_es; + + EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS; + es->s_state |= cpu_to_le16(EXT3_ERROR_FS); + + if (sb->s_flags & MS_RDONLY) + return; + + if (test_opt (sb, ERRORS_RO)) { + printk (KERN_CRIT "Remounting filesystem read-only\n"); + sb->s_flags |= MS_RDONLY; + } else { + journal_t *journal = EXT3_SB(sb)->s_journal; + + EXT3_SB(sb)->s_mount_opt |= EXT3_MOUNT_ABORT; + if (journal) + journal_abort(journal, -EIO); + } + if (test_opt(sb, ERRORS_PANIC)) + panic("EXT3-fs (device %s): panic forced after error\n", + sb->s_id); + ext3_commit_super(sb, es, 1); +} + +void ext3_error (struct super_block * sb, const char * function, + const char * fmt, ...) +{ + va_list args; + + va_start(args, fmt); + printk(KERN_CRIT "EXT3-fs error (device %s): %s: ",sb->s_id, function); + vprintk(fmt, args); + printk("\n"); + va_end(args); + + ext3_handle_error(sb); +} + +static const char *ext3_decode_error(struct super_block * sb, int errno, + char nbuf[16]) +{ + char *errstr = NULL; + + switch (errno) { + case -EIO: + errstr = "IO failure"; + break; + case -ENOMEM: + errstr = "Out of memory"; + break; + case -EROFS: + if (!sb || EXT3_SB(sb)->s_journal->j_flags & JFS_ABORT) + errstr = "Journal has aborted"; + else + errstr = "Readonly filesystem"; + break; + default: + /* If the caller passed in an extra buffer for unknown + * errors, textualise them now. Else we just return + * NULL. */ + if (nbuf) { + /* Check for truncated error codes... */ + if (snprintf(nbuf, 16, "error %d", -errno) >= 0) + errstr = nbuf; + } + break; + } + + return errstr; +} + +/* __ext3_std_error decodes expected errors from journaling functions + * automatically and invokes the appropriate error response. */ + +void __ext3_std_error (struct super_block * sb, const char * function, + int errno) +{ + char nbuf[16]; + const char *errstr = ext3_decode_error(sb, errno, nbuf); + + printk (KERN_CRIT "EXT3-fs error (device %s) in %s: %s\n", + sb->s_id, function, errstr); + + ext3_handle_error(sb); +} + +/* + * ext3_abort is a much stronger failure handler than ext3_error. The + * abort function may be used to deal with unrecoverable failures such + * as journal IO errors or ENOMEM at a critical moment in log management. + * + * We unconditionally force the filesystem into an ABORT|READONLY state, + * unless the error response on the fs has been set to panic in which + * case we take the easy way out and panic immediately. + */ + +void ext3_abort (struct super_block * sb, const char * function, + const char * fmt, ...) +{ + va_list args; + + printk (KERN_CRIT "ext3_abort called.\n"); + + va_start(args, fmt); + printk(KERN_CRIT "EXT3-fs error (device %s): %s: ",sb->s_id, function); + vprintk(fmt, args); + printk("\n"); + va_end(args); + + if (test_opt(sb, ERRORS_PANIC)) + panic("EXT3-fs panic from previous error\n"); + + if (sb->s_flags & MS_RDONLY) + return; + + printk(KERN_CRIT "Remounting filesystem read-only\n"); + EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS; + sb->s_flags |= MS_RDONLY; + EXT3_SB(sb)->s_mount_opt |= EXT3_MOUNT_ABORT; + journal_abort(EXT3_SB(sb)->s_journal, -EIO); +} + +void ext3_warning (struct super_block * sb, const char * function, + const char * fmt, ...) +{ + va_list args; + + va_start(args, fmt); + printk(KERN_WARNING "EXT3-fs warning (device %s): %s: ", + sb->s_id, function); + vprintk(fmt, args); + printk("\n"); + va_end(args); +} + +void ext3_update_dynamic_rev(struct super_block *sb) +{ + struct ext3_super_block *es = EXT3_SB(sb)->s_es; + + if (le32_to_cpu(es->s_rev_level) > EXT3_GOOD_OLD_REV) + return; + + ext3_warning(sb, __FUNCTION__, + "updating to rev %d because of new feature flag, " + "running e2fsck is recommended", + EXT3_DYNAMIC_REV); + + es->s_first_ino = cpu_to_le32(EXT3_GOOD_OLD_FIRST_INO); + es->s_inode_size = cpu_to_le16(EXT3_GOOD_OLD_INODE_SIZE); + es->s_rev_level = cpu_to_le32(EXT3_DYNAMIC_REV); + /* leave es->s_feature_*compat flags alone */ + /* es->s_uuid will be set by e2fsck if empty */ + + /* + * The rest of the superblock fields should be zero, and if not it + * means they are likely already in use, so leave them alone. We + * can leave it up to e2fsck to clean up any inconsistencies there. + */ +} + +/* + * Open the external journal device + */ +static struct block_device *ext3_blkdev_get(dev_t dev) +{ + struct block_device *bdev; + char b[BDEVNAME_SIZE]; + + bdev = open_by_devnum(dev, FMODE_READ|FMODE_WRITE); + if (IS_ERR(bdev)) + goto fail; + return bdev; + +fail: + printk(KERN_ERR "EXT3: failed to open journal device %s: %ld\n", + __bdevname(dev, b), PTR_ERR(bdev)); + return NULL; +} + +/* + * Release the journal device + */ +static int ext3_blkdev_put(struct block_device *bdev) +{ + bd_release(bdev); + return blkdev_put(bdev); +} + +static int ext3_blkdev_remove(struct ext3_sb_info *sbi) +{ + struct block_device *bdev; + int ret = -ENODEV; + + bdev = sbi->journal_bdev; + if (bdev) { + ret = ext3_blkdev_put(bdev); + sbi->journal_bdev = NULL; + } + return ret; +} + +static inline struct inode *orphan_list_entry(struct list_head *l) +{ + return &list_entry(l, struct ext3_inode_info, i_orphan)->vfs_inode; +} + +static void dump_orphan_list(struct super_block *sb, struct ext3_sb_info *sbi) +{ + struct list_head *l; + + printk(KERN_ERR "sb orphan head is %d\n", + le32_to_cpu(sbi->s_es->s_last_orphan)); + + printk(KERN_ERR "sb_info orphan list:\n"); + list_for_each(l, &sbi->s_orphan) { + struct inode *inode = orphan_list_entry(l); + printk(KERN_ERR " " + "inode %s:%ld at %p: mode %o, nlink %d, next %d\n", + inode->i_sb->s_id, inode->i_ino, inode, + inode->i_mode, inode->i_nlink, + NEXT_ORPHAN(inode)); + } +} + +static void ext3_put_super (struct super_block * sb) +{ + struct ext3_sb_info *sbi = EXT3_SB(sb); + struct ext3_super_block *es = sbi->s_es; + int i; + + ext3_xattr_put_super(sb); + journal_destroy(sbi->s_journal); + if (!(sb->s_flags & MS_RDONLY)) { + EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); + es->s_state = cpu_to_le16(sbi->s_mount_state); + BUFFER_TRACE(sbi->s_sbh, "marking dirty"); + mark_buffer_dirty(sbi->s_sbh); + ext3_commit_super(sb, es, 1); + } + + for (i = 0; i < sbi->s_gdb_count; i++) + brelse(sbi->s_group_desc[i]); + kfree(sbi->s_group_desc); + percpu_counter_destroy(&sbi->s_freeblocks_counter); + percpu_counter_destroy(&sbi->s_freeinodes_counter); + percpu_counter_destroy(&sbi->s_dirs_counter); + brelse(sbi->s_sbh); +#ifdef CONFIG_QUOTA + for (i = 0; i < MAXQUOTAS; i++) + kfree(sbi->s_qf_names[i]); +#endif + + /* Debugging code just in case the in-memory inode orphan list + * isn't empty. The on-disk one can be non-empty if we've + * detected an error and taken the fs readonly, but the + * in-memory list had better be clean by this point. */ + if (!list_empty(&sbi->s_orphan)) + dump_orphan_list(sb, sbi); + J_ASSERT(list_empty(&sbi->s_orphan)); + + invalidate_bdev(sb->s_bdev, 0); + if (sbi->journal_bdev && sbi->journal_bdev != sb->s_bdev) { + /* + * Invalidate the journal device's buffers. We don't want them + * floating about in memory - the physical journal device may + * hotswapped, and it breaks the `ro-after' testing code. + */ + sync_blockdev(sbi->journal_bdev); + invalidate_bdev(sbi->journal_bdev, 0); + ext3_blkdev_remove(sbi); + } + sb->s_fs_info = NULL; + kfree(sbi); + return; +} + +static kmem_cache_t *ext3_inode_cachep; + +/* + * Called inside transaction, so use GFP_NOFS + */ +static struct inode *ext3_alloc_inode(struct super_block *sb) +{ + struct ext3_inode_info *ei; + + ei = kmem_cache_alloc(ext3_inode_cachep, SLAB_NOFS); + if (!ei) + return NULL; +#ifdef CONFIG_EXT3_FS_POSIX_ACL + ei->i_acl = EXT3_ACL_NOT_CACHED; + ei->i_default_acl = EXT3_ACL_NOT_CACHED; +#endif + ei->i_block_alloc_info = NULL; + ei->vfs_inode.i_version = 1; + return &ei->vfs_inode; +} + +static void ext3_destroy_inode(struct inode *inode) +{ + kmem_cache_free(ext3_inode_cachep, EXT3_I(inode)); +} + +static void init_once(void * foo, kmem_cache_t * cachep, unsigned long flags) +{ + struct ext3_inode_info *ei = (struct ext3_inode_info *) foo; + + if ((flags & (SLAB_CTOR_VERIFY|SLAB_CTOR_CONSTRUCTOR)) == + SLAB_CTOR_CONSTRUCTOR) { + INIT_LIST_HEAD(&ei->i_orphan); +#ifdef CONFIG_EXT3_FS_XATTR + init_rwsem(&ei->xattr_sem); +#endif + init_MUTEX(&ei->truncate_sem); + inode_init_once(&ei->vfs_inode); + } +} + +static int init_inodecache(void) +{ + ext3_inode_cachep = kmem_cache_create("ext3_inode_cache", + sizeof(struct ext3_inode_info), + 0, SLAB_RECLAIM_ACCOUNT, + init_once, NULL); + if (ext3_inode_cachep == NULL) + return -ENOMEM; + return 0; +} + +static void destroy_inodecache(void) +{ + if (kmem_cache_destroy(ext3_inode_cachep)) + printk(KERN_INFO "ext3_inode_cache: not all structures were freed\n"); +} + +static void ext3_clear_inode(struct inode *inode) +{ + struct ext3_block_alloc_info *rsv = EXT3_I(inode)->i_block_alloc_info; +#ifdef CONFIG_EXT3_FS_POSIX_ACL + if (EXT3_I(inode)->i_acl && + EXT3_I(inode)->i_acl != EXT3_ACL_NOT_CACHED) { + posix_acl_release(EXT3_I(inode)->i_acl); + EXT3_I(inode)->i_acl = EXT3_ACL_NOT_CACHED; + } + if (EXT3_I(inode)->i_default_acl && + EXT3_I(inode)->i_default_acl != EXT3_ACL_NOT_CACHED) { + posix_acl_release(EXT3_I(inode)->i_default_acl); + EXT3_I(inode)->i_default_acl = EXT3_ACL_NOT_CACHED; + } +#endif + ext3_discard_reservation(inode); + EXT3_I(inode)->i_block_alloc_info = NULL; + kfree(rsv); +} + +#ifdef CONFIG_QUOTA + +#define QTYPE2NAME(t) ((t)==USRQUOTA?"user":"group") +#define QTYPE2MOPT(on, t) ((t)==USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA)) + +static int ext3_dquot_initialize(struct inode *inode, int type); +static int ext3_dquot_drop(struct inode *inode); +static int ext3_write_dquot(struct dquot *dquot); +static int ext3_acquire_dquot(struct dquot *dquot); +static int ext3_release_dquot(struct dquot *dquot); +static int ext3_mark_dquot_dirty(struct dquot *dquot); +static int ext3_write_info(struct super_block *sb, int type); +static int ext3_quota_on(struct super_block *sb, int type, int format_id, char *path); +static int ext3_quota_on_mount(struct super_block *sb, int type); +static ssize_t ext3_quota_read(struct super_block *sb, int type, char *data, + size_t len, loff_t off); +static ssize_t ext3_quota_write(struct super_block *sb, int type, + const char *data, size_t len, loff_t off); + +static struct dquot_operations ext3_quota_operations = { + .initialize = ext3_dquot_initialize, + .drop = ext3_dquot_drop, + .alloc_space = dquot_alloc_space, + .alloc_inode = dquot_alloc_inode, + .free_space = dquot_free_space, + .free_inode = dquot_free_inode, + .transfer = dquot_transfer, + .write_dquot = ext3_write_dquot, + .acquire_dquot = ext3_acquire_dquot, + .release_dquot = ext3_release_dquot, + .mark_dirty = ext3_mark_dquot_dirty, + .write_info = ext3_write_info +}; + +static struct quotactl_ops ext3_qctl_operations = { + .quota_on = ext3_quota_on, + .quota_off = vfs_quota_off, + .quota_sync = vfs_quota_sync, + .get_info = vfs_get_dqinfo, + .set_info = vfs_set_dqinfo, + .get_dqblk = vfs_get_dqblk, + .set_dqblk = vfs_set_dqblk +}; +#endif + +static struct super_operations ext3_sops = { + .alloc_inode = ext3_alloc_inode, + .destroy_inode = ext3_destroy_inode, + .read_inode = ext3_read_inode, + .write_inode = ext3_write_inode, + .dirty_inode = ext3_dirty_inode, + .delete_inode = ext3_delete_inode, + .put_super = ext3_put_super, + .write_super = ext3_write_super, + .sync_fs = ext3_sync_fs, + .write_super_lockfs = ext3_write_super_lockfs, + .unlockfs = ext3_unlockfs, + .statfs = ext3_statfs, + .remount_fs = ext3_remount, + .clear_inode = ext3_clear_inode, +#ifdef CONFIG_QUOTA + .quota_read = ext3_quota_read, + .quota_write = ext3_quota_write, +#endif +}; + +struct dentry *ext3_get_parent(struct dentry *child); +static struct export_operations ext3_export_ops = { + .get_parent = ext3_get_parent, +}; + +enum { + Opt_bsd_df, Opt_minix_df, Opt_grpid, Opt_nogrpid, + Opt_resgid, Opt_resuid, Opt_sb, Opt_err_cont, Opt_err_panic, Opt_err_ro, + Opt_nouid32, Opt_check, Opt_nocheck, Opt_debug, Opt_oldalloc, Opt_orlov, + Opt_user_xattr, Opt_nouser_xattr, Opt_acl, Opt_noacl, + Opt_reservation, Opt_noreservation, Opt_noload, Opt_nobh, + Opt_commit, Opt_journal_update, Opt_journal_inum, + Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback, + Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota, + Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, + Opt_ignore, Opt_barrier, Opt_err, Opt_resize, +}; + +static match_table_t tokens = { + {Opt_bsd_df, "bsddf"}, + {Opt_minix_df, "minixdf"}, + {Opt_grpid, "grpid"}, + {Opt_grpid, "bsdgroups"}, + {Opt_nogrpid, "nogrpid"}, + {Opt_nogrpid, "sysvgroups"}, + {Opt_resgid, "resgid=%u"}, + {Opt_resuid, "resuid=%u"}, + {Opt_sb, "sb=%u"}, + {Opt_err_cont, "errors=continue"}, + {Opt_err_panic, "errors=panic"}, + {Opt_err_ro, "errors=remount-ro"}, + {Opt_nouid32, "nouid32"}, + {Opt_nocheck, "nocheck"}, + {Opt_nocheck, "check=none"}, + {Opt_check, "check"}, + {Opt_debug, "debug"}, + {Opt_oldalloc, "oldalloc"}, + {Opt_orlov, "orlov"}, + {Opt_user_xattr, "user_xattr"}, + {Opt_nouser_xattr, "nouser_xattr"}, + {Opt_acl, "acl"}, + {Opt_noacl, "noacl"}, + {Opt_reservation, "reservation"}, + {Opt_noreservation, "noreservation"}, + {Opt_noload, "noload"}, + {Opt_nobh, "nobh"}, + {Opt_commit, "commit=%u"}, + {Opt_journal_update, "journal=update"}, + {Opt_journal_inum, "journal=%u"}, + {Opt_abort, "abort"}, + {Opt_data_journal, "data=journal"}, + {Opt_data_ordered, "data=ordered"}, + {Opt_data_writeback, "data=writeback"}, + {Opt_offusrjquota, "usrjquota="}, + {Opt_usrjquota, "usrjquota=%s"}, + {Opt_offgrpjquota, "grpjquota="}, + {Opt_grpjquota, "grpjquota=%s"}, + {Opt_jqfmt_vfsold, "jqfmt=vfsold"}, + {Opt_jqfmt_vfsv0, "jqfmt=vfsv0"}, + {Opt_ignore, "grpquota"}, + {Opt_ignore, "noquota"}, + {Opt_ignore, "quota"}, + {Opt_ignore, "usrquota"}, + {Opt_barrier, "barrier=%u"}, + {Opt_err, NULL}, + {Opt_resize, "resize"}, +}; + +static unsigned long get_sb_block(void **data) +{ + unsigned long sb_block; + char *options = (char *) *data; + + if (!options || strncmp(options, "sb=", 3) != 0) + return 1; /* Default location */ + options += 3; + sb_block = simple_strtoul(options, &options, 0); + if (*options && *options != ',') { + printk("EXT3-fs: Invalid sb specification: %s\n", + (char *) *data); + return 1; + } + if (*options == ',') + options++; + *data = (void *) options; + return sb_block; +} + +static int parse_options (char * options, struct super_block *sb, + unsigned long * inum, unsigned long *n_blocks_count, int is_remount) +{ + struct ext3_sb_info *sbi = EXT3_SB(sb); + char * p; + substring_t args[MAX_OPT_ARGS]; + int data_opt = 0; + int option; +#ifdef CONFIG_QUOTA + int qtype; + char *qname; +#endif + + if (!options) + return 1; + + while ((p = strsep (&options, ",")) != NULL) { + int token; + if (!*p) + continue; + + token = match_token(p, tokens, args); + switch (token) { + case Opt_bsd_df: + clear_opt (sbi->s_mount_opt, MINIX_DF); + break; + case Opt_minix_df: + set_opt (sbi->s_mount_opt, MINIX_DF); + break; + case Opt_grpid: + set_opt (sbi->s_mount_opt, GRPID); + break; + case Opt_nogrpid: + clear_opt (sbi->s_mount_opt, GRPID); + break; + case Opt_resuid: + if (match_int(&args[0], &option)) + return 0; + sbi->s_resuid = option; + break; + case Opt_resgid: + if (match_int(&args[0], &option)) + return 0; + sbi->s_resgid = option; + break; + case Opt_sb: + /* handled by get_sb_block() instead of here */ + /* *sb_block = match_int(&args[0]); */ + break; + case Opt_err_panic: + clear_opt (sbi->s_mount_opt, ERRORS_CONT); + clear_opt (sbi->s_mount_opt, ERRORS_RO); + set_opt (sbi->s_mount_opt, ERRORS_PANIC); + break; + case Opt_err_ro: + clear_opt (sbi->s_mount_opt, ERRORS_CONT); + clear_opt (sbi->s_mount_opt, ERRORS_PANIC); + set_opt (sbi->s_mount_opt, ERRORS_RO); + break; + case Opt_err_cont: + clear_opt (sbi->s_mount_opt, ERRORS_RO); + clear_opt (sbi->s_mount_opt, ERRORS_PANIC); + set_opt (sbi->s_mount_opt, ERRORS_CONT); + break; + case Opt_nouid32: + set_opt (sbi->s_mount_opt, NO_UID32); + break; + case Opt_check: +#ifdef CONFIG_EXT3_CHECK + set_opt (sbi->s_mount_opt, CHECK); +#else + printk(KERN_ERR + "EXT3 Check option not supported\n"); +#endif + break; + case Opt_nocheck: + clear_opt (sbi->s_mount_opt, CHECK); + break; + case Opt_debug: + set_opt (sbi->s_mount_opt, DEBUG); + break; + case Opt_oldalloc: + set_opt (sbi->s_mount_opt, OLDALLOC); + break; + case Opt_orlov: + clear_opt (sbi->s_mount_opt, OLDALLOC); + break; +#ifdef CONFIG_EXT3_FS_XATTR + case Opt_user_xattr: + set_opt (sbi->s_mount_opt, XATTR_USER); + break; + case Opt_nouser_xattr: + clear_opt (sbi->s_mount_opt, XATTR_USER); + break; +#else + case Opt_user_xattr: + case Opt_nouser_xattr: + printk("EXT3 (no)user_xattr options not supported\n"); + break; +#endif +#ifdef CONFIG_EXT3_FS_POSIX_ACL + case Opt_acl: + set_opt(sbi->s_mount_opt, POSIX_ACL); + break; + case Opt_noacl: + clear_opt(sbi->s_mount_opt, POSIX_ACL); + break; +#else + case Opt_acl: + case Opt_noacl: + printk("EXT3 (no)acl options not supported\n"); + break; +#endif + case Opt_reservation: + set_opt(sbi->s_mount_opt, RESERVATION); + break; + case Opt_noreservation: + clear_opt(sbi->s_mount_opt, RESERVATION); + break; + case Opt_journal_update: + /* @@@ FIXME */ + /* Eventually we will want to be able to create + a journal file here. For now, only allow the + user to specify an existing inode to be the + journal file. */ + if (is_remount) { + printk(KERN_ERR "EXT3-fs: cannot specify " + "journal on remount\n"); + return 0; + } + set_opt (sbi->s_mount_opt, UPDATE_JOURNAL); + break; + case Opt_journal_inum: + if (is_remount) { + printk(KERN_ERR "EXT3-fs: cannot specify " + "journal on remount\n"); + return 0; + } + if (match_int(&args[0], &option)) + return 0; + *inum = option; + break; + case Opt_noload: + set_opt (sbi->s_mount_opt, NOLOAD); + break; + case Opt_commit: + if (match_int(&args[0], &option)) + return 0; + if (option < 0) + return 0; + if (option == 0) + option = JBD_DEFAULT_MAX_COMMIT_AGE; + sbi->s_commit_interval = HZ * option; + break; + case Opt_data_journal: + data_opt = EXT3_MOUNT_JOURNAL_DATA; + goto datacheck; + case Opt_data_ordered: + data_opt = EXT3_MOUNT_ORDERED_DATA; + goto datacheck; + case Opt_data_writeback: + data_opt = EXT3_MOUNT_WRITEBACK_DATA; + datacheck: + if (is_remount) { + if ((sbi->s_mount_opt & EXT3_MOUNT_DATA_FLAGS) + != data_opt) { + printk(KERN_ERR + "EXT3-fs: cannot change data " + "mode on remount\n"); + return 0; + } + } else { + sbi->s_mount_opt &= ~EXT3_MOUNT_DATA_FLAGS; + sbi->s_mount_opt |= data_opt; + } + break; +#ifdef CONFIG_QUOTA + case Opt_usrjquota: + qtype = USRQUOTA; + goto set_qf_name; + case Opt_grpjquota: + qtype = GRPQUOTA; +set_qf_name: + if (sb_any_quota_enabled(sb)) { + printk(KERN_ERR + "EXT3-fs: Cannot change journalled " + "quota options when quota turned on.\n"); + return 0; + } + qname = match_strdup(&args[0]); + if (!qname) { + printk(KERN_ERR + "EXT3-fs: not enough memory for " + "storing quotafile name.\n"); + return 0; + } + if (sbi->s_qf_names[qtype] && + strcmp(sbi->s_qf_names[qtype], qname)) { + printk(KERN_ERR + "EXT3-fs: %s quota file already " + "specified.\n", QTYPE2NAME(qtype)); + kfree(qname); + return 0; + } + sbi->s_qf_names[qtype] = qname; + if (strchr(sbi->s_qf_names[qtype], '/')) { + printk(KERN_ERR + "EXT3-fs: quotafile must be on " + "filesystem root.\n"); + kfree(sbi->s_qf_names[qtype]); + sbi->s_qf_names[qtype] = NULL; + return 0; + } + break; + case Opt_offusrjquota: + qtype = USRQUOTA; + goto clear_qf_name; + case Opt_offgrpjquota: + qtype = GRPQUOTA; +clear_qf_name: + if (sb_any_quota_enabled(sb)) { + printk(KERN_ERR "EXT3-fs: Cannot change " + "journalled quota options when " + "quota turned on.\n"); + return 0; + } + kfree(sbi->s_qf_names[qtype]); + sbi->s_qf_names[qtype] = NULL; + break; + case Opt_jqfmt_vfsold: + sbi->s_jquota_fmt = QFMT_VFS_OLD; + break; + case Opt_jqfmt_vfsv0: + sbi->s_jquota_fmt = QFMT_VFS_V0; + break; +#else + case Opt_usrjquota: + case Opt_grpjquota: + case Opt_offusrjquota: + case Opt_offgrpjquota: + case Opt_jqfmt_vfsold: + case Opt_jqfmt_vfsv0: + printk(KERN_ERR + "EXT3-fs: journalled quota options not " + "supported.\n"); + break; +#endif + case Opt_abort: + set_opt(sbi->s_mount_opt, ABORT); + break; + case Opt_barrier: + if (match_int(&args[0], &option)) + return 0; + if (option) + set_opt(sbi->s_mount_opt, BARRIER); + else + clear_opt(sbi->s_mount_opt, BARRIER); + break; + case Opt_ignore: + break; + case Opt_resize: + if (!n_blocks_count) { + printk("EXT3-fs: resize option only available " + "for remount\n"); + return 0; + } + match_int(&args[0], &option); + *n_blocks_count = option; + break; + case Opt_nobh: + set_opt(sbi->s_mount_opt, NOBH); + break; + default: + printk (KERN_ERR + "EXT3-fs: Unrecognized mount option \"%s\" " + "or missing value\n", p); + return 0; + } + } +#ifdef CONFIG_QUOTA + if (!sbi->s_jquota_fmt && (sbi->s_qf_names[USRQUOTA] || + sbi->s_qf_names[GRPQUOTA])) { + printk(KERN_ERR + "EXT3-fs: journalled quota format not specified.\n"); + return 0; + } +#endif + + return 1; +} + +static int ext3_setup_super(struct super_block *sb, struct ext3_super_block *es, + int read_only) +{ + struct ext3_sb_info *sbi = EXT3_SB(sb); + int res = 0; + + if (le32_to_cpu(es->s_rev_level) > EXT3_MAX_SUPP_REV) { + printk (KERN_ERR "EXT3-fs warning: revision level too high, " + "forcing read-only mode\n"); + res = MS_RDONLY; + } + if (read_only) + return res; + if (!(sbi->s_mount_state & EXT3_VALID_FS)) + printk (KERN_WARNING "EXT3-fs warning: mounting unchecked fs, " + "running e2fsck is recommended\n"); + else if ((sbi->s_mount_state & EXT3_ERROR_FS)) + printk (KERN_WARNING + "EXT3-fs warning: mounting fs with errors, " + "running e2fsck is recommended\n"); + else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 && + le16_to_cpu(es->s_mnt_count) >= + (unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count)) + printk (KERN_WARNING + "EXT3-fs warning: maximal mount count reached, " + "running e2fsck is recommended\n"); + else if (le32_to_cpu(es->s_checkinterval) && + (le32_to_cpu(es->s_lastcheck) + + le32_to_cpu(es->s_checkinterval) <= get_seconds())) + printk (KERN_WARNING + "EXT3-fs warning: checktime reached, " + "running e2fsck is recommended\n"); +#if 0 + /* @@@ We _will_ want to clear the valid bit if we find + inconsistencies, to force a fsck at reboot. But for + a plain journaled filesystem we can keep it set as + valid forever! :) */ + es->s_state = cpu_to_le16(le16_to_cpu(es->s_state) & ~EXT3_VALID_FS); +#endif + if (!(__s16) le16_to_cpu(es->s_max_mnt_count)) + es->s_max_mnt_count = cpu_to_le16(EXT3_DFL_MAX_MNT_COUNT); + es->s_mnt_count=cpu_to_le16(le16_to_cpu(es->s_mnt_count) + 1); + es->s_mtime = cpu_to_le32(get_seconds()); + ext3_update_dynamic_rev(sb); + EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); + + ext3_commit_super(sb, es, 1); + if (test_opt(sb, DEBUG)) + printk(KERN_INFO "[EXT3 FS bs=%lu, gc=%lu, " + "bpg=%lu, ipg=%lu, mo=%04lx]\n", + sb->s_blocksize, + sbi->s_groups_count, + EXT3_BLOCKS_PER_GROUP(sb), + EXT3_INODES_PER_GROUP(sb), + sbi->s_mount_opt); + + printk(KERN_INFO "EXT3 FS on %s, ", sb->s_id); + if (EXT3_SB(sb)->s_journal->j_inode == NULL) { + char b[BDEVNAME_SIZE]; + + printk("external journal on %s\n", + bdevname(EXT3_SB(sb)->s_journal->j_dev, b)); + } else { + printk("internal journal\n"); + } +#ifdef CONFIG_EXT3_CHECK + if (test_opt (sb, CHECK)) { + ext3_check_blocks_bitmap (sb); + ext3_check_inodes_bitmap (sb); + } +#endif + return res; +} + +/* Called at mount-time, super-block is locked */ +static int ext3_check_descriptors (struct super_block * sb) +{ + struct ext3_sb_info *sbi = EXT3_SB(sb); + unsigned long block = le32_to_cpu(sbi->s_es->s_first_data_block); + struct ext3_group_desc * gdp = NULL; + int desc_block = 0; + int i; + + ext3_debug ("Checking group descriptors"); + + for (i = 0; i < sbi->s_groups_count; i++) + { + if ((i % EXT3_DESC_PER_BLOCK(sb)) == 0) + gdp = (struct ext3_group_desc *) + sbi->s_group_desc[desc_block++]->b_data; + if (le32_to_cpu(gdp->bg_block_bitmap) < block || + le32_to_cpu(gdp->bg_block_bitmap) >= + block + EXT3_BLOCKS_PER_GROUP(sb)) + { + ext3_error (sb, "ext3_check_descriptors", + "Block bitmap for group %d" + " not in group (block %lu)!", + i, (unsigned long) + le32_to_cpu(gdp->bg_block_bitmap)); + return 0; + } + if (le32_to_cpu(gdp->bg_inode_bitmap) < block || + le32_to_cpu(gdp->bg_inode_bitmap) >= + block + EXT3_BLOCKS_PER_GROUP(sb)) + { + ext3_error (sb, "ext3_check_descriptors", + "Inode bitmap for group %d" + " not in group (block %lu)!", + i, (unsigned long) + le32_to_cpu(gdp->bg_inode_bitmap)); + return 0; + } + if (le32_to_cpu(gdp->bg_inode_table) < block || + le32_to_cpu(gdp->bg_inode_table) + sbi->s_itb_per_group >= + block + EXT3_BLOCKS_PER_GROUP(sb)) + { + ext3_error (sb, "ext3_check_descriptors", + "Inode table for group %d" + " not in group (block %lu)!", + i, (unsigned long) + le32_to_cpu(gdp->bg_inode_table)); + return 0; + } + block += EXT3_BLOCKS_PER_GROUP(sb); + gdp++; + } + + sbi->s_es->s_free_blocks_count=cpu_to_le32(ext3_count_free_blocks(sb)); + sbi->s_es->s_free_inodes_count=cpu_to_le32(ext3_count_free_inodes(sb)); + return 1; +} + + +/* ext3_orphan_cleanup() walks a singly-linked list of inodes (starting at + * the superblock) which were deleted from all directories, but held open by + * a process at the time of a crash. We walk the list and try to delete these + * inodes at recovery time (only with a read-write filesystem). + * + * In order to keep the orphan inode chain consistent during traversal (in + * case of crash during recovery), we link each inode into the superblock + * orphan list_head and handle it the same way as an inode deletion during + * normal operation (which journals the operations for us). + * + * We only do an iget() and an iput() on each inode, which is very safe if we + * accidentally point at an in-use or already deleted inode. The worst that + * can happen in this case is that we get a "bit already cleared" message from + * ext3_free_inode(). The only reason we would point at a wrong inode is if + * e2fsck was run on this filesystem, and it must have already done the orphan + * inode cleanup for us, so we can safely abort without any further action. + */ +static void ext3_orphan_cleanup (struct super_block * sb, + struct ext3_super_block * es) +{ + unsigned int s_flags = sb->s_flags; + int nr_orphans = 0, nr_truncates = 0; +#ifdef CONFIG_QUOTA + int i; +#endif + if (!es->s_last_orphan) { + jbd_debug(4, "no orphan inodes to clean up\n"); + return; + } + + if (EXT3_SB(sb)->s_mount_state & EXT3_ERROR_FS) { + if (es->s_last_orphan) + jbd_debug(1, "Errors on filesystem, " + "clearing orphan list.\n"); + es->s_last_orphan = 0; + jbd_debug(1, "Skipping orphan recovery on fs with errors.\n"); + return; + } + + if (s_flags & MS_RDONLY) { + printk(KERN_INFO "EXT3-fs: %s: orphan cleanup on readonly fs\n", + sb->s_id); + sb->s_flags &= ~MS_RDONLY; + } +#ifdef CONFIG_QUOTA + /* Needed for iput() to work correctly and not trash data */ + sb->s_flags |= MS_ACTIVE; + /* Turn on quotas so that they are updated correctly */ + for (i = 0; i < MAXQUOTAS; i++) { + if (EXT3_SB(sb)->s_qf_names[i]) { + int ret = ext3_quota_on_mount(sb, i); + if (ret < 0) + printk(KERN_ERR + "EXT3-fs: Cannot turn on journalled " + "quota: error %d\n", ret); + } + } +#endif + + while (es->s_last_orphan) { + struct inode *inode; + + if (!(inode = + ext3_orphan_get(sb, le32_to_cpu(es->s_last_orphan)))) { + es->s_last_orphan = 0; + break; + } + + list_add(&EXT3_I(inode)->i_orphan, &EXT3_SB(sb)->s_orphan); + DQUOT_INIT(inode); + if (inode->i_nlink) { + printk(KERN_DEBUG + "%s: truncating inode %ld to %Ld bytes\n", + __FUNCTION__, inode->i_ino, inode->i_size); + jbd_debug(2, "truncating inode %ld to %Ld bytes\n", + inode->i_ino, inode->i_size); + ext3_truncate(inode); + nr_truncates++; + } else { + printk(KERN_DEBUG + "%s: deleting unreferenced inode %ld\n", + __FUNCTION__, inode->i_ino); + jbd_debug(2, "deleting unreferenced inode %ld\n", + inode->i_ino); + nr_orphans++; + } + iput(inode); /* The delete magic happens here! */ + } + +#define PLURAL(x) (x), ((x)==1) ? "" : "s" + + if (nr_orphans) + printk(KERN_INFO "EXT3-fs: %s: %d orphan inode%s deleted\n", + sb->s_id, PLURAL(nr_orphans)); + if (nr_truncates) + printk(KERN_INFO "EXT3-fs: %s: %d truncate%s cleaned up\n", + sb->s_id, PLURAL(nr_truncates)); +#ifdef CONFIG_QUOTA + /* Turn quotas off */ + for (i = 0; i < MAXQUOTAS; i++) { + if (sb_dqopt(sb)->files[i]) + vfs_quota_off(sb, i); + } +#endif + sb->s_flags = s_flags; /* Restore MS_RDONLY status */ +} + +#define log2(n) ffz(~(n)) + +/* + * Maximal file size. There is a direct, and {,double-,triple-}indirect + * block limit, and also a limit of (2^32 - 1) 512-byte sectors in i_blocks. + * We need to be 1 filesystem block less than the 2^32 sector limit. + */ +static loff_t ext3_max_size(int bits) +{ + loff_t res = EXT3_NDIR_BLOCKS; + /* This constant is calculated to be the largest file size for a + * dense, 4k-blocksize file such that the total number of + * sectors in the file, including data and all indirect blocks, + * does not exceed 2^32. */ + const loff_t upper_limit = 0x1ff7fffd000LL; + + res += 1LL << (bits-2); + res += 1LL << (2*(bits-2)); + res += 1LL << (3*(bits-2)); + res <<= bits; + if (res > upper_limit) + res = upper_limit; + return res; +} + +static unsigned long descriptor_loc(struct super_block *sb, + unsigned long logic_sb_block, + int nr) +{ + struct ext3_sb_info *sbi = EXT3_SB(sb); + unsigned long bg, first_data_block, first_meta_bg; + int has_super = 0; + + first_data_block = le32_to_cpu(sbi->s_es->s_first_data_block); + first_meta_bg = le32_to_cpu(sbi->s_es->s_first_meta_bg); + + if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_META_BG) || + nr < first_meta_bg) + return (logic_sb_block + nr + 1); + bg = sbi->s_desc_per_block * nr; + if (ext3_bg_has_super(sb, bg)) + has_super = 1; + return (first_data_block + has_super + (bg * sbi->s_blocks_per_group)); +} + + +static int ext3_fill_super (struct super_block *sb, void *data, int silent) +{ + struct buffer_head * bh; + struct ext3_super_block *es = NULL; + struct ext3_sb_info *sbi; + unsigned long block; + unsigned long sb_block = get_sb_block(&data); + unsigned long logic_sb_block; + unsigned long offset = 0; + unsigned long journal_inum = 0; + unsigned long def_mount_opts; + struct inode *root; + int blocksize; + int hblock; + int db_count; + int i; + int needs_recovery; + __le32 features; + + sbi = kmalloc(sizeof(*sbi), GFP_KERNEL); + if (!sbi) + return -ENOMEM; + sb->s_fs_info = sbi; + memset(sbi, 0, sizeof(*sbi)); + sbi->s_mount_opt = 0; + sbi->s_resuid = EXT3_DEF_RESUID; + sbi->s_resgid = EXT3_DEF_RESGID; + + unlock_kernel(); + + blocksize = sb_min_blocksize(sb, EXT3_MIN_BLOCK_SIZE); + if (!blocksize) { + printk(KERN_ERR "EXT3-fs: unable to set blocksize\n"); + goto out_fail; + } + + /* + * The ext3 superblock will not be buffer aligned for other than 1kB + * block sizes. We need to calculate the offset from buffer start. + */ + if (blocksize != EXT3_MIN_BLOCK_SIZE) { + logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize; + offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize; + } else { + logic_sb_block = sb_block; + } + + if (!(bh = sb_bread(sb, logic_sb_block))) { + printk (KERN_ERR "EXT3-fs: unable to read superblock\n"); + goto out_fail; + } + /* + * Note: s_es must be initialized as soon as possible because + * some ext3 macro-instructions depend on its value + */ + es = (struct ext3_super_block *) (((char *)bh->b_data) + offset); + sbi->s_es = es; + sb->s_magic = le16_to_cpu(es->s_magic); + if (sb->s_magic != EXT3_SUPER_MAGIC) + goto cantfind_ext3; + + /* Set defaults before we parse the mount options */ + def_mount_opts = le32_to_cpu(es->s_default_mount_opts); + if (def_mount_opts & EXT3_DEFM_DEBUG) + set_opt(sbi->s_mount_opt, DEBUG); + if (def_mount_opts & EXT3_DEFM_BSDGROUPS) + set_opt(sbi->s_mount_opt, GRPID); + if (def_mount_opts & EXT3_DEFM_UID16) + set_opt(sbi->s_mount_opt, NO_UID32); + if (def_mount_opts & EXT3_DEFM_XATTR_USER) + set_opt(sbi->s_mount_opt, XATTR_USER); + if (def_mount_opts & EXT3_DEFM_ACL) + set_opt(sbi->s_mount_opt, POSIX_ACL); + if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_DATA) + sbi->s_mount_opt |= EXT3_MOUNT_JOURNAL_DATA; + else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_ORDERED) + sbi->s_mount_opt |= EXT3_MOUNT_ORDERED_DATA; + else if ((def_mount_opts & EXT3_DEFM_JMODE) == EXT3_DEFM_JMODE_WBACK) + sbi->s_mount_opt |= EXT3_MOUNT_WRITEBACK_DATA; + + if (le16_to_cpu(sbi->s_es->s_errors) == EXT3_ERRORS_PANIC) + set_opt(sbi->s_mount_opt, ERRORS_PANIC); + else if (le16_to_cpu(sbi->s_es->s_errors) == EXT3_ERRORS_RO) + set_opt(sbi->s_mount_opt, ERRORS_RO); + + sbi->s_resuid = le16_to_cpu(es->s_def_resuid); + sbi->s_resgid = le16_to_cpu(es->s_def_resgid); + + set_opt(sbi->s_mount_opt, RESERVATION); + + if (!parse_options ((char *) data, sb, &journal_inum, NULL, 0)) + goto failed_mount; + + sb->s_flags = (sb->s_flags & ~MS_POSIXACL) | + ((sbi->s_mount_opt & EXT3_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0); + + if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV && + (EXT3_HAS_COMPAT_FEATURE(sb, ~0U) || + EXT3_HAS_RO_COMPAT_FEATURE(sb, ~0U) || + EXT3_HAS_INCOMPAT_FEATURE(sb, ~0U))) + printk(KERN_WARNING + "EXT3-fs warning: feature flags set on rev 0 fs, " + "running e2fsck is recommended\n"); + /* + * Check feature flags regardless of the revision level, since we + * previously didn't change the revision level when setting the flags, + * so there is a chance incompat flags are set on a rev 0 filesystem. + */ + features = EXT3_HAS_INCOMPAT_FEATURE(sb, ~EXT3_FEATURE_INCOMPAT_SUPP); + if (features) { + printk(KERN_ERR "EXT3-fs: %s: couldn't mount because of " + "unsupported optional features (%x).\n", + sb->s_id, le32_to_cpu(features)); + goto failed_mount; + } + features = EXT3_HAS_RO_COMPAT_FEATURE(sb, ~EXT3_FEATURE_RO_COMPAT_SUPP); + if (!(sb->s_flags & MS_RDONLY) && features) { + printk(KERN_ERR "EXT3-fs: %s: couldn't mount RDWR because of " + "unsupported optional features (%x).\n", + sb->s_id, le32_to_cpu(features)); + goto failed_mount; + } + blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size); + + if (blocksize < EXT3_MIN_BLOCK_SIZE || + blocksize > EXT3_MAX_BLOCK_SIZE) { + printk(KERN_ERR + "EXT3-fs: Unsupported filesystem blocksize %d on %s.\n", + blocksize, sb->s_id); + goto failed_mount; + } + + hblock = bdev_hardsect_size(sb->s_bdev); + if (sb->s_blocksize != blocksize) { + /* + * Make sure the blocksize for the filesystem is larger + * than the hardware sectorsize for the machine. + */ + if (blocksize < hblock) { + printk(KERN_ERR "EXT3-fs: blocksize %d too small for " + "device blocksize %d.\n", blocksize, hblock); + goto failed_mount; + } + + brelse (bh); + sb_set_blocksize(sb, blocksize); + logic_sb_block = (sb_block * EXT3_MIN_BLOCK_SIZE) / blocksize; + offset = (sb_block * EXT3_MIN_BLOCK_SIZE) % blocksize; + bh = sb_bread(sb, logic_sb_block); + if (!bh) { + printk(KERN_ERR + "EXT3-fs: Can't read superblock on 2nd try.\n"); + goto failed_mount; + } + es = (struct ext3_super_block *)(((char *)bh->b_data) + offset); + sbi->s_es = es; + if (es->s_magic != cpu_to_le16(EXT3_SUPER_MAGIC)) { + printk (KERN_ERR + "EXT3-fs: Magic mismatch, very weird !\n"); + goto failed_mount; + } + } + + sb->s_maxbytes = ext3_max_size(sb->s_blocksize_bits); + + if (le32_to_cpu(es->s_rev_level) == EXT3_GOOD_OLD_REV) { + sbi->s_inode_size = EXT3_GOOD_OLD_INODE_SIZE; + sbi->s_first_ino = EXT3_GOOD_OLD_FIRST_INO; + } else { + sbi->s_inode_size = le16_to_cpu(es->s_inode_size); + sbi->s_first_ino = le32_to_cpu(es->s_first_ino); + if ((sbi->s_inode_size < EXT3_GOOD_OLD_INODE_SIZE) || + (sbi->s_inode_size & (sbi->s_inode_size - 1)) || + (sbi->s_inode_size > blocksize)) { + printk (KERN_ERR + "EXT3-fs: unsupported inode size: %d\n", + sbi->s_inode_size); + goto failed_mount; + } + } + sbi->s_frag_size = EXT3_MIN_FRAG_SIZE << + le32_to_cpu(es->s_log_frag_size); + if (blocksize != sbi->s_frag_size) { + printk(KERN_ERR + "EXT3-fs: fragsize %lu != blocksize %u (unsupported)\n", + sbi->s_frag_size, blocksize); + goto failed_mount; + } + sbi->s_frags_per_block = 1; + sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group); + sbi->s_frags_per_group = le32_to_cpu(es->s_frags_per_group); + sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group); + if (EXT3_INODE_SIZE(sb) == 0) + goto cantfind_ext3; + sbi->s_inodes_per_block = blocksize / EXT3_INODE_SIZE(sb); + if (sbi->s_inodes_per_block == 0) + goto cantfind_ext3; + sbi->s_itb_per_group = sbi->s_inodes_per_group / + sbi->s_inodes_per_block; + sbi->s_desc_per_block = blocksize / sizeof(struct ext3_group_desc); + sbi->s_sbh = bh; + sbi->s_mount_state = le16_to_cpu(es->s_state); + sbi->s_addr_per_block_bits = log2(EXT3_ADDR_PER_BLOCK(sb)); + sbi->s_desc_per_block_bits = log2(EXT3_DESC_PER_BLOCK(sb)); + for (i=0; i < 4; i++) + sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]); + sbi->s_def_hash_version = es->s_def_hash_version; + + if (sbi->s_blocks_per_group > blocksize * 8) { + printk (KERN_ERR + "EXT3-fs: #blocks per group too big: %lu\n", + sbi->s_blocks_per_group); + goto failed_mount; + } + if (sbi->s_frags_per_group > blocksize * 8) { + printk (KERN_ERR + "EXT3-fs: #fragments per group too big: %lu\n", + sbi->s_frags_per_group); + goto failed_mount; + } + if (sbi->s_inodes_per_group > blocksize * 8) { + printk (KERN_ERR + "EXT3-fs: #inodes per group too big: %lu\n", + sbi->s_inodes_per_group); + goto failed_mount; + } + + if (EXT3_BLOCKS_PER_GROUP(sb) == 0) + goto cantfind_ext3; + sbi->s_groups_count = (le32_to_cpu(es->s_blocks_count) - + le32_to_cpu(es->s_first_data_block) + + EXT3_BLOCKS_PER_GROUP(sb) - 1) / + EXT3_BLOCKS_PER_GROUP(sb); + db_count = (sbi->s_groups_count + EXT3_DESC_PER_BLOCK(sb) - 1) / + EXT3_DESC_PER_BLOCK(sb); + sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *), + GFP_KERNEL); + if (sbi->s_group_desc == NULL) { + printk (KERN_ERR "EXT3-fs: not enough memory\n"); + goto failed_mount; + } + + percpu_counter_init(&sbi->s_freeblocks_counter); + percpu_counter_init(&sbi->s_freeinodes_counter); + percpu_counter_init(&sbi->s_dirs_counter); + bgl_lock_init(&sbi->s_blockgroup_lock); + + for (i = 0; i < db_count; i++) { + block = descriptor_loc(sb, logic_sb_block, i); + sbi->s_group_desc[i] = sb_bread(sb, block); + if (!sbi->s_group_desc[i]) { + printk (KERN_ERR "EXT3-fs: " + "can't read group descriptor %d\n", i); + db_count = i; + goto failed_mount2; + } + } + if (!ext3_check_descriptors (sb)) { + printk (KERN_ERR "EXT3-fs: group descriptors corrupted !\n"); + goto failed_mount2; + } + sbi->s_gdb_count = db_count; + get_random_bytes(&sbi->s_next_generation, sizeof(u32)); + spin_lock_init(&sbi->s_next_gen_lock); + /* per fileystem reservation list head & lock */ + spin_lock_init(&sbi->s_rsv_window_lock); + sbi->s_rsv_window_root = RB_ROOT; + /* Add a single, static dummy reservation to the start of the + * reservation window list --- it gives us a placeholder for + * append-at-start-of-list which makes the allocation logic + * _much_ simpler. */ + sbi->s_rsv_window_head.rsv_start = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; + sbi->s_rsv_window_head.rsv_end = EXT3_RESERVE_WINDOW_NOT_ALLOCATED; + sbi->s_rsv_window_head.rsv_alloc_hit = 0; + sbi->s_rsv_window_head.rsv_goal_size = 0; + ext3_rsv_window_add(sb, &sbi->s_rsv_window_head); + + /* + * set up enough so that it can read an inode + */ + sb->s_op = &ext3_sops; + sb->s_export_op = &ext3_export_ops; + sb->s_xattr = ext3_xattr_handlers; +#ifdef CONFIG_QUOTA + sb->s_qcop = &ext3_qctl_operations; + sb->dq_op = &ext3_quota_operations; +#endif + INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */ + + sb->s_root = NULL; + + needs_recovery = (es->s_last_orphan != 0 || + EXT3_HAS_INCOMPAT_FEATURE(sb, + EXT3_FEATURE_INCOMPAT_RECOVER)); + + /* + * The first inode we look at is the journal inode. Don't try + * root first: it may be modified in the journal! + */ + if (!test_opt(sb, NOLOAD) && + EXT3_HAS_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL)) { + if (ext3_load_journal(sb, es)) + goto failed_mount2; + } else if (journal_inum) { + if (ext3_create_journal(sb, es, journal_inum)) + goto failed_mount2; + } else { + if (!silent) + printk (KERN_ERR + "ext3: No journal on filesystem on %s\n", + sb->s_id); + goto failed_mount2; + } + + /* We have now updated the journal if required, so we can + * validate the data journaling mode. */ + switch (test_opt(sb, DATA_FLAGS)) { + case 0: + /* No mode set, assume a default based on the journal + capabilities: ORDERED_DATA if the journal can + cope, else JOURNAL_DATA */ + if (journal_check_available_features + (sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)) + set_opt(sbi->s_mount_opt, ORDERED_DATA); + else + set_opt(sbi->s_mount_opt, JOURNAL_DATA); + break; + + case EXT3_MOUNT_ORDERED_DATA: + case EXT3_MOUNT_WRITEBACK_DATA: + if (!journal_check_available_features + (sbi->s_journal, 0, 0, JFS_FEATURE_INCOMPAT_REVOKE)) { + printk(KERN_ERR "EXT3-fs: Journal does not support " + "requested data journaling mode\n"); + goto failed_mount3; + } + default: + break; + } + + if (test_opt(sb, NOBH)) { + if (sb->s_blocksize_bits != PAGE_CACHE_SHIFT) { + printk(KERN_WARNING "EXT3-fs: Ignoring nobh option " + "since filesystem blocksize doesn't match " + "pagesize\n"); + clear_opt(sbi->s_mount_opt, NOBH); + } + if (!(test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA)) { + printk(KERN_WARNING "EXT3-fs: Ignoring nobh option - " + "its supported only with writeback mode\n"); + clear_opt(sbi->s_mount_opt, NOBH); + } + } + /* + * The journal_load will have done any necessary log recovery, + * so we can safely mount the rest of the filesystem now. + */ + + root = iget(sb, EXT3_ROOT_INO); + sb->s_root = d_alloc_root(root); + if (!sb->s_root) { + printk(KERN_ERR "EXT3-fs: get root inode failed\n"); + iput(root); + goto failed_mount3; + } + if (!S_ISDIR(root->i_mode) || !root->i_blocks || !root->i_size) { + dput(sb->s_root); + sb->s_root = NULL; + printk(KERN_ERR "EXT3-fs: corrupt root inode, run e2fsck\n"); + goto failed_mount3; + } + + ext3_setup_super (sb, es, sb->s_flags & MS_RDONLY); + /* + * akpm: core read_super() calls in here with the superblock locked. + * That deadlocks, because orphan cleanup needs to lock the superblock + * in numerous places. Here we just pop the lock - it's relatively + * harmless, because we are now ready to accept write_super() requests, + * and aviro says that's the only reason for hanging onto the + * superblock lock. + */ + EXT3_SB(sb)->s_mount_state |= EXT3_ORPHAN_FS; + ext3_orphan_cleanup(sb, es); + EXT3_SB(sb)->s_mount_state &= ~EXT3_ORPHAN_FS; + if (needs_recovery) + printk (KERN_INFO "EXT3-fs: recovery complete.\n"); + ext3_mark_recovery_complete(sb, es); + printk (KERN_INFO "EXT3-fs: mounted filesystem with %s data mode.\n", + test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_JOURNAL_DATA ? "journal": + test_opt(sb,DATA_FLAGS) == EXT3_MOUNT_ORDERED_DATA ? "ordered": + "writeback"); + + percpu_counter_mod(&sbi->s_freeblocks_counter, + ext3_count_free_blocks(sb)); + percpu_counter_mod(&sbi->s_freeinodes_counter, + ext3_count_free_inodes(sb)); + percpu_counter_mod(&sbi->s_dirs_counter, + ext3_count_dirs(sb)); + + lock_kernel(); + return 0; + +cantfind_ext3: + if (!silent) + printk(KERN_ERR "VFS: Can't find ext3 filesystem on dev %s.\n", + sb->s_id); + goto failed_mount; + +failed_mount3: + journal_destroy(sbi->s_journal); +failed_mount2: + for (i = 0; i < db_count; i++) + brelse(sbi->s_group_desc[i]); + kfree(sbi->s_group_desc); +failed_mount: +#ifdef CONFIG_QUOTA + for (i = 0; i < MAXQUOTAS; i++) + kfree(sbi->s_qf_names[i]); +#endif + ext3_blkdev_remove(sbi); + brelse(bh); +out_fail: + sb->s_fs_info = NULL; + kfree(sbi); + lock_kernel(); + return -EINVAL; +} + +/* + * Setup any per-fs journal parameters now. We'll do this both on + * initial mount, once the journal has been initialised but before we've + * done any recovery; and again on any subsequent remount. + */ +static void ext3_init_journal_params(struct super_block *sb, journal_t *journal) +{ + struct ext3_sb_info *sbi = EXT3_SB(sb); + + if (sbi->s_commit_interval) + journal->j_commit_interval = sbi->s_commit_interval; + /* We could also set up an ext3-specific default for the commit + * interval here, but for now we'll just fall back to the jbd + * default. */ + + spin_lock(&journal->j_state_lock); + if (test_opt(sb, BARRIER)) + journal->j_flags |= JFS_BARRIER; + else + journal->j_flags &= ~JFS_BARRIER; + spin_unlock(&journal->j_state_lock); +} + +static journal_t *ext3_get_journal(struct super_block *sb, int journal_inum) +{ + struct inode *journal_inode; + journal_t *journal; + + /* First, test for the existence of a valid inode on disk. Bad + * things happen if we iget() an unused inode, as the subsequent + * iput() will try to delete it. */ + + journal_inode = iget(sb, journal_inum); + if (!journal_inode) { + printk(KERN_ERR "EXT3-fs: no journal found.\n"); + return NULL; + } + if (!journal_inode->i_nlink) { + make_bad_inode(journal_inode); + iput(journal_inode); + printk(KERN_ERR "EXT3-fs: journal inode is deleted.\n"); + return NULL; + } + + jbd_debug(2, "Journal inode found at %p: %Ld bytes\n", + journal_inode, journal_inode->i_size); + if (is_bad_inode(journal_inode) || !S_ISREG(journal_inode->i_mode)) { + printk(KERN_ERR "EXT3-fs: invalid journal inode.\n"); + iput(journal_inode); + return NULL; + } + + journal = journal_init_inode(journal_inode); + if (!journal) { + printk(KERN_ERR "EXT3-fs: Could not load journal inode\n"); + iput(journal_inode); + return NULL; + } + journal->j_private = sb; + ext3_init_journal_params(sb, journal); + return journal; +} + +static journal_t *ext3_get_dev_journal(struct super_block *sb, + dev_t j_dev) +{ + struct buffer_head * bh; + journal_t *journal; + int start; + int len; + int hblock, blocksize; + unsigned long sb_block; + unsigned long offset; + struct ext3_super_block * es; + struct block_device *bdev; + + bdev = ext3_blkdev_get(j_dev); + if (bdev == NULL) + return NULL; + + if (bd_claim(bdev, sb)) { + printk(KERN_ERR + "EXT3: failed to claim external journal device.\n"); + blkdev_put(bdev); + return NULL; + } + + blocksize = sb->s_blocksize; + hblock = bdev_hardsect_size(bdev); + if (blocksize < hblock) { + printk(KERN_ERR + "EXT3-fs: blocksize too small for journal device.\n"); + goto out_bdev; + } + + sb_block = EXT3_MIN_BLOCK_SIZE / blocksize; + offset = EXT3_MIN_BLOCK_SIZE % blocksize; + set_blocksize(bdev, blocksize); + if (!(bh = __bread(bdev, sb_block, blocksize))) { + printk(KERN_ERR "EXT3-fs: couldn't read superblock of " + "external journal\n"); + goto out_bdev; + } + + es = (struct ext3_super_block *) (((char *)bh->b_data) + offset); + if ((le16_to_cpu(es->s_magic) != EXT3_SUPER_MAGIC) || + !(le32_to_cpu(es->s_feature_incompat) & + EXT3_FEATURE_INCOMPAT_JOURNAL_DEV)) { + printk(KERN_ERR "EXT3-fs: external journal has " + "bad superblock\n"); + brelse(bh); + goto out_bdev; + } + + if (memcmp(EXT3_SB(sb)->s_es->s_journal_uuid, es->s_uuid, 16)) { + printk(KERN_ERR "EXT3-fs: journal UUID does not match\n"); + brelse(bh); + goto out_bdev; + } + + len = le32_to_cpu(es->s_blocks_count); + start = sb_block + 1; + brelse(bh); /* we're done with the superblock */ + + journal = journal_init_dev(bdev, sb->s_bdev, + start, len, blocksize); + if (!journal) { + printk(KERN_ERR "EXT3-fs: failed to create device journal\n"); + goto out_bdev; + } + journal->j_private = sb; + ll_rw_block(READ, 1, &journal->j_sb_buffer); + wait_on_buffer(journal->j_sb_buffer); + if (!buffer_uptodate(journal->j_sb_buffer)) { + printk(KERN_ERR "EXT3-fs: I/O error on journal device\n"); + goto out_journal; + } + if (be32_to_cpu(journal->j_superblock->s_nr_users) != 1) { + printk(KERN_ERR "EXT3-fs: External journal has more than one " + "user (unsupported) - %d\n", + be32_to_cpu(journal->j_superblock->s_nr_users)); + goto out_journal; + } + EXT3_SB(sb)->journal_bdev = bdev; + ext3_init_journal_params(sb, journal); + return journal; +out_journal: + journal_destroy(journal); +out_bdev: + ext3_blkdev_put(bdev); + return NULL; +} + +static int ext3_load_journal(struct super_block * sb, + struct ext3_super_block * es) +{ + journal_t *journal; + int journal_inum = le32_to_cpu(es->s_journal_inum); + dev_t journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev)); + int err = 0; + int really_read_only; + + really_read_only = bdev_read_only(sb->s_bdev); + + /* + * Are we loading a blank journal or performing recovery after a + * crash? For recovery, we need to check in advance whether we + * can get read-write access to the device. + */ + + if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER)) { + if (sb->s_flags & MS_RDONLY) { + printk(KERN_INFO "EXT3-fs: INFO: recovery " + "required on readonly filesystem.\n"); + if (really_read_only) { + printk(KERN_ERR "EXT3-fs: write access " + "unavailable, cannot proceed.\n"); + return -EROFS; + } + printk (KERN_INFO "EXT3-fs: write access will " + "be enabled during recovery.\n"); + } + } + + if (journal_inum && journal_dev) { + printk(KERN_ERR "EXT3-fs: filesystem has both journal " + "and inode journals!\n"); + return -EINVAL; + } + + if (journal_inum) { + if (!(journal = ext3_get_journal(sb, journal_inum))) + return -EINVAL; + } else { + if (!(journal = ext3_get_dev_journal(sb, journal_dev))) + return -EINVAL; + } + + if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) { + err = journal_update_format(journal); + if (err) { + printk(KERN_ERR "EXT3-fs: error updating journal.\n"); + journal_destroy(journal); + return err; + } + } + + if (!EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER)) + err = journal_wipe(journal, !really_read_only); + if (!err) + err = journal_load(journal); + + if (err) { + printk(KERN_ERR "EXT3-fs: error loading journal.\n"); + journal_destroy(journal); + return err; + } + + EXT3_SB(sb)->s_journal = journal; + ext3_clear_journal_err(sb, es); + return 0; +} + +static int ext3_create_journal(struct super_block * sb, + struct ext3_super_block * es, + int journal_inum) +{ + journal_t *journal; + + if (sb->s_flags & MS_RDONLY) { + printk(KERN_ERR "EXT3-fs: readonly filesystem when trying to " + "create journal.\n"); + return -EROFS; + } + + if (!(journal = ext3_get_journal(sb, journal_inum))) + return -EINVAL; + + printk(KERN_INFO "EXT3-fs: creating new journal on inode %d\n", + journal_inum); + + if (journal_create(journal)) { + printk(KERN_ERR "EXT3-fs: error creating journal.\n"); + journal_destroy(journal); + return -EIO; + } + + EXT3_SB(sb)->s_journal = journal; + + ext3_update_dynamic_rev(sb); + EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); + EXT3_SET_COMPAT_FEATURE(sb, EXT3_FEATURE_COMPAT_HAS_JOURNAL); + + es->s_journal_inum = cpu_to_le32(journal_inum); + sb->s_dirt = 1; + + /* Make sure we flush the recovery flag to disk. */ + ext3_commit_super(sb, es, 1); + + return 0; +} + +static void ext3_commit_super (struct super_block * sb, + struct ext3_super_block * es, + int sync) +{ + struct buffer_head *sbh = EXT3_SB(sb)->s_sbh; + + if (!sbh) + return; + es->s_wtime = cpu_to_le32(get_seconds()); + es->s_free_blocks_count = cpu_to_le32(ext3_count_free_blocks(sb)); + es->s_free_inodes_count = cpu_to_le32(ext3_count_free_inodes(sb)); + BUFFER_TRACE(sbh, "marking dirty"); + mark_buffer_dirty(sbh); + if (sync) + sync_dirty_buffer(sbh); +} + + +/* + * Have we just finished recovery? If so, and if we are mounting (or + * remounting) the filesystem readonly, then we will end up with a + * consistent fs on disk. Record that fact. + */ +static void ext3_mark_recovery_complete(struct super_block * sb, + struct ext3_super_block * es) +{ + journal_t *journal = EXT3_SB(sb)->s_journal; + + journal_lock_updates(journal); + journal_flush(journal); + if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER) && + sb->s_flags & MS_RDONLY) { + EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); + sb->s_dirt = 0; + ext3_commit_super(sb, es, 1); + } + journal_unlock_updates(journal); +} + +/* + * If we are mounting (or read-write remounting) a filesystem whose journal + * has recorded an error from a previous lifetime, move that error to the + * main filesystem now. + */ +static void ext3_clear_journal_err(struct super_block * sb, + struct ext3_super_block * es) +{ + journal_t *journal; + int j_errno; + const char *errstr; + + journal = EXT3_SB(sb)->s_journal; + + /* + * Now check for any error status which may have been recorded in the + * journal by a prior ext3_error() or ext3_abort() + */ + + j_errno = journal_errno(journal); + if (j_errno) { + char nbuf[16]; + + errstr = ext3_decode_error(sb, j_errno, nbuf); + ext3_warning(sb, __FUNCTION__, "Filesystem error recorded " + "from previous mount: %s", errstr); + ext3_warning(sb, __FUNCTION__, "Marking fs in need of " + "filesystem check."); + + EXT3_SB(sb)->s_mount_state |= EXT3_ERROR_FS; + es->s_state |= cpu_to_le16(EXT3_ERROR_FS); + ext3_commit_super (sb, es, 1); + + journal_clear_err(journal); + } +} + +/* + * Force the running and committing transactions to commit, + * and wait on the commit. + */ +int ext3_force_commit(struct super_block *sb) +{ + journal_t *journal; + int ret; + + if (sb->s_flags & MS_RDONLY) + return 0; + + journal = EXT3_SB(sb)->s_journal; + sb->s_dirt = 0; + ret = ext3_journal_force_commit(journal); + return ret; +} + +/* + * Ext3 always journals updates to the superblock itself, so we don't + * have to propagate any other updates to the superblock on disk at this + * point. Just start an async writeback to get the buffers on their way + * to the disk. + * + * This implicitly triggers the writebehind on sync(). + */ + +static void ext3_write_super (struct super_block * sb) +{ + if (down_trylock(&sb->s_lock) == 0) + BUG(); + sb->s_dirt = 0; +} + +static int ext3_sync_fs(struct super_block *sb, int wait) +{ + tid_t target; + + sb->s_dirt = 0; + if (journal_start_commit(EXT3_SB(sb)->s_journal, &target)) { + if (wait) + log_wait_commit(EXT3_SB(sb)->s_journal, target); + } + return 0; +} + +/* + * LVM calls this function before a (read-only) snapshot is created. This + * gives us a chance to flush the journal completely and mark the fs clean. + */ +static void ext3_write_super_lockfs(struct super_block *sb) +{ + sb->s_dirt = 0; + + if (!(sb->s_flags & MS_RDONLY)) { + journal_t *journal = EXT3_SB(sb)->s_journal; + + /* Now we set up the journal barrier. */ + journal_lock_updates(journal); + journal_flush(journal); + + /* Journal blocked and flushed, clear needs_recovery flag. */ + EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); + ext3_commit_super(sb, EXT3_SB(sb)->s_es, 1); + } +} + +/* + * Called by LVM after the snapshot is done. We need to reset the RECOVER + * flag here, even though the filesystem is not technically dirty yet. + */ +static void ext3_unlockfs(struct super_block *sb) +{ + if (!(sb->s_flags & MS_RDONLY)) { + lock_super(sb); + /* Reser the needs_recovery flag before the fs is unlocked. */ + EXT3_SET_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); + ext3_commit_super(sb, EXT3_SB(sb)->s_es, 1); + unlock_super(sb); + journal_unlock_updates(EXT3_SB(sb)->s_journal); + } +} + +static int ext3_remount (struct super_block * sb, int * flags, char * data) +{ + struct ext3_super_block * es; + struct ext3_sb_info *sbi = EXT3_SB(sb); + unsigned long tmp; + unsigned long n_blocks_count = 0; + + /* + * Allow the "check" option to be passed as a remount option. + */ + if (!parse_options(data, sb, &tmp, &n_blocks_count, 1)) + return -EINVAL; + + if (sbi->s_mount_opt & EXT3_MOUNT_ABORT) + ext3_abort(sb, __FUNCTION__, "Abort forced by user"); + + sb->s_flags = (sb->s_flags & ~MS_POSIXACL) | + ((sbi->s_mount_opt & EXT3_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0); + + es = sbi->s_es; + + ext3_init_journal_params(sb, sbi->s_journal); + + if ((*flags & MS_RDONLY) != (sb->s_flags & MS_RDONLY) || + n_blocks_count > le32_to_cpu(es->s_blocks_count)) { + if (sbi->s_mount_opt & EXT3_MOUNT_ABORT) + return -EROFS; + + if (*flags & MS_RDONLY) { + /* + * First of all, the unconditional stuff we have to do + * to disable replay of the journal when we next remount + */ + sb->s_flags |= MS_RDONLY; + + /* + * OK, test if we are remounting a valid rw partition + * readonly, and if so set the rdonly flag and then + * mark the partition as valid again. + */ + if (!(es->s_state & cpu_to_le16(EXT3_VALID_FS)) && + (sbi->s_mount_state & EXT3_VALID_FS)) + es->s_state = cpu_to_le16(sbi->s_mount_state); + + ext3_mark_recovery_complete(sb, es); + } else { + __le32 ret; + if ((ret = EXT3_HAS_RO_COMPAT_FEATURE(sb, + ~EXT3_FEATURE_RO_COMPAT_SUPP))) { + printk(KERN_WARNING "EXT3-fs: %s: couldn't " + "remount RDWR because of unsupported " + "optional features (%x).\n", + sb->s_id, le32_to_cpu(ret)); + return -EROFS; + } + /* + * Mounting a RDONLY partition read-write, so reread + * and store the current valid flag. (It may have + * been changed by e2fsck since we originally mounted + * the partition.) + */ + ext3_clear_journal_err(sb, es); + sbi->s_mount_state = le16_to_cpu(es->s_state); + if ((ret = ext3_group_extend(sb, es, n_blocks_count))) + return ret; + if (!ext3_setup_super (sb, es, 0)) + sb->s_flags &= ~MS_RDONLY; + } + } + return 0; +} + +static int ext3_statfs (struct super_block * sb, struct kstatfs * buf) +{ + struct ext3_super_block *es = EXT3_SB(sb)->s_es; + unsigned long overhead; + int i; + + if (test_opt (sb, MINIX_DF)) + overhead = 0; + else { + unsigned long ngroups; + ngroups = EXT3_SB(sb)->s_groups_count; + smp_rmb(); + + /* + * Compute the overhead (FS structures) + */ + + /* + * All of the blocks before first_data_block are + * overhead + */ + overhead = le32_to_cpu(es->s_first_data_block); + + /* + * Add the overhead attributed to the superblock and + * block group descriptors. If the sparse superblocks + * feature is turned on, then not all groups have this. + */ + for (i = 0; i < ngroups; i++) { + overhead += ext3_bg_has_super(sb, i) + + ext3_bg_num_gdb(sb, i); + cond_resched(); + } + + /* + * Every block group has an inode bitmap, a block + * bitmap, and an inode table. + */ + overhead += (ngroups * (2 + EXT3_SB(sb)->s_itb_per_group)); + } + + buf->f_type = EXT3_SUPER_MAGIC; + buf->f_bsize = sb->s_blocksize; + buf->f_blocks = le32_to_cpu(es->s_blocks_count) - overhead; + buf->f_bfree = ext3_count_free_blocks (sb); + buf->f_bavail = buf->f_bfree - le32_to_cpu(es->s_r_blocks_count); + if (buf->f_bfree < le32_to_cpu(es->s_r_blocks_count)) + buf->f_bavail = 0; + buf->f_files = le32_to_cpu(es->s_inodes_count); + buf->f_ffree = ext3_count_free_inodes (sb); + buf->f_namelen = EXT3_NAME_LEN; + return 0; +} + +/* Helper function for writing quotas on sync - we need to start transaction before quota file + * is locked for write. Otherwise the are possible deadlocks: + * Process 1 Process 2 + * ext3_create() quota_sync() + * journal_start() write_dquot() + * DQUOT_INIT() down(dqio_sem) + * down(dqio_sem) journal_start() + * + */ + +#ifdef CONFIG_QUOTA + +static inline struct inode *dquot_to_inode(struct dquot *dquot) +{ + return sb_dqopt(dquot->dq_sb)->files[dquot->dq_type]; +} + +static int ext3_dquot_initialize(struct inode *inode, int type) +{ + handle_t *handle; + int ret, err; + + /* We may create quota structure so we need to reserve enough blocks */ + handle = ext3_journal_start(inode, 2*EXT3_QUOTA_INIT_BLOCKS); + if (IS_ERR(handle)) + return PTR_ERR(handle); + ret = dquot_initialize(inode, type); + err = ext3_journal_stop(handle); + if (!ret) + ret = err; + return ret; +} + +static int ext3_dquot_drop(struct inode *inode) +{ + handle_t *handle; + int ret, err; + + /* We may delete quota structure so we need to reserve enough blocks */ + handle = ext3_journal_start(inode, 2*EXT3_QUOTA_INIT_BLOCKS); + if (IS_ERR(handle)) + return PTR_ERR(handle); + ret = dquot_drop(inode); + err = ext3_journal_stop(handle); + if (!ret) + ret = err; + return ret; +} + +static int ext3_write_dquot(struct dquot *dquot) +{ + int ret, err; + handle_t *handle; + struct inode *inode; + + inode = dquot_to_inode(dquot); + handle = ext3_journal_start(inode, + EXT3_QUOTA_TRANS_BLOCKS); + if (IS_ERR(handle)) + return PTR_ERR(handle); + ret = dquot_commit(dquot); + err = ext3_journal_stop(handle); + if (!ret) + ret = err; + return ret; +} + +static int ext3_acquire_dquot(struct dquot *dquot) +{ + int ret, err; + handle_t *handle; + + handle = ext3_journal_start(dquot_to_inode(dquot), + EXT3_QUOTA_INIT_BLOCKS); + if (IS_ERR(handle)) + return PTR_ERR(handle); + ret = dquot_acquire(dquot); + err = ext3_journal_stop(handle); + if (!ret) + ret = err; + return ret; +} + +static int ext3_release_dquot(struct dquot *dquot) +{ + int ret, err; + handle_t *handle; + + handle = ext3_journal_start(dquot_to_inode(dquot), + EXT3_QUOTA_INIT_BLOCKS); + if (IS_ERR(handle)) + return PTR_ERR(handle); + ret = dquot_release(dquot); + err = ext3_journal_stop(handle); + if (!ret) + ret = err; + return ret; +} + +static int ext3_mark_dquot_dirty(struct dquot *dquot) +{ + /* Are we journalling quotas? */ + if (EXT3_SB(dquot->dq_sb)->s_qf_names[USRQUOTA] || + EXT3_SB(dquot->dq_sb)->s_qf_names[GRPQUOTA]) { + dquot_mark_dquot_dirty(dquot); + return ext3_write_dquot(dquot); + } else { + return dquot_mark_dquot_dirty(dquot); + } +} + +static int ext3_write_info(struct super_block *sb, int type) +{ + int ret, err; + handle_t *handle; + + /* Data block + inode block */ + handle = ext3_journal_start(sb->s_root->d_inode, 2); + if (IS_ERR(handle)) + return PTR_ERR(handle); + ret = dquot_commit_info(sb, type); + err = ext3_journal_stop(handle); + if (!ret) + ret = err; + return ret; +} + +/* + * Turn on quotas during mount time - we need to find + * the quota file and such... + */ +static int ext3_quota_on_mount(struct super_block *sb, int type) +{ + int err; + struct dentry *dentry; + struct qstr name = { .name = EXT3_SB(sb)->s_qf_names[type], + .hash = 0, + .len = strlen(EXT3_SB(sb)->s_qf_names[type])}; + + dentry = lookup_hash(&name, sb->s_root); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); + err = vfs_quota_on_mount(type, EXT3_SB(sb)->s_jquota_fmt, dentry); + /* Now invalidate and put the dentry - quota got its own reference + * to inode and dentry has at least wrong hash so we had better + * throw it away */ + d_invalidate(dentry); + dput(dentry); + return err; +} + +/* + * Standard function to be called on quota_on + */ +static int ext3_quota_on(struct super_block *sb, int type, int format_id, + char *path) +{ + int err; + struct nameidata nd; + + /* Not journalling quota? */ + if (!EXT3_SB(sb)->s_qf_names[USRQUOTA] && + !EXT3_SB(sb)->s_qf_names[GRPQUOTA]) + return vfs_quota_on(sb, type, format_id, path); + err = path_lookup(path, LOOKUP_FOLLOW, &nd); + if (err) + return err; + /* Quotafile not on the same filesystem? */ + if (nd.mnt->mnt_sb != sb) { + path_release(&nd); + return -EXDEV; + } + /* Quotafile not of fs root? */ + if (nd.dentry->d_parent->d_inode != sb->s_root->d_inode) + printk(KERN_WARNING + "EXT3-fs: Quota file not on filesystem root. " + "Journalled quota will not work.\n"); + path_release(&nd); + return vfs_quota_on(sb, type, format_id, path); +} + +/* Read data from quotafile - avoid pagecache and such because we cannot afford + * acquiring the locks... As quota files are never truncated and quota code + * itself serializes the operations (and noone else should touch the files) + * we don't have to be afraid of races */ +static ssize_t ext3_quota_read(struct super_block *sb, int type, char *data, + size_t len, loff_t off) +{ + struct inode *inode = sb_dqopt(sb)->files[type]; + sector_t blk = off >> EXT3_BLOCK_SIZE_BITS(sb); + int err = 0; + int offset = off & (sb->s_blocksize - 1); + int tocopy; + size_t toread; + struct buffer_head *bh; + loff_t i_size = i_size_read(inode); + + if (off > i_size) + return 0; + if (off+len > i_size) + len = i_size-off; + toread = len; + while (toread > 0) { + tocopy = sb->s_blocksize - offset < toread ? + sb->s_blocksize - offset : toread; + bh = ext3_bread(NULL, inode, blk, 0, &err); + if (err) + return err; + if (!bh) /* A hole? */ + memset(data, 0, tocopy); + else + memcpy(data, bh->b_data+offset, tocopy); + brelse(bh); + offset = 0; + toread -= tocopy; + data += tocopy; + blk++; + } + return len; +} + +/* Write to quotafile (we know the transaction is already started and has + * enough credits) */ +static ssize_t ext3_quota_write(struct super_block *sb, int type, + const char *data, size_t len, loff_t off) +{ + struct inode *inode = sb_dqopt(sb)->files[type]; + sector_t blk = off >> EXT3_BLOCK_SIZE_BITS(sb); + int err = 0; + int offset = off & (sb->s_blocksize - 1); + int tocopy; + int journal_quota = EXT3_SB(sb)->s_qf_names[type] != NULL; + size_t towrite = len; + struct buffer_head *bh; + handle_t *handle = journal_current_handle(); + + down(&inode->i_sem); + while (towrite > 0) { + tocopy = sb->s_blocksize - offset < towrite ? + sb->s_blocksize - offset : towrite; + bh = ext3_bread(handle, inode, blk, 1, &err); + if (!bh) + goto out; + if (journal_quota) { + err = ext3_journal_get_write_access(handle, bh); + if (err) { + brelse(bh); + goto out; + } + } + lock_buffer(bh); + memcpy(bh->b_data+offset, data, tocopy); + flush_dcache_page(bh->b_page); + unlock_buffer(bh); + if (journal_quota) + err = ext3_journal_dirty_metadata(handle, bh); + else { + /* Always do at least ordered writes for quotas */ + err = ext3_journal_dirty_data(handle, bh); + mark_buffer_dirty(bh); + } + brelse(bh); + if (err) + goto out; + offset = 0; + towrite -= tocopy; + data += tocopy; + blk++; + } +out: + if (len == towrite) + return err; + if (inode->i_size < off+len-towrite) { + i_size_write(inode, off+len-towrite); + EXT3_I(inode)->i_disksize = inode->i_size; + } + inode->i_version++; + inode->i_mtime = inode->i_ctime = CURRENT_TIME; + ext3_mark_inode_dirty(handle, inode); + up(&inode->i_sem); + return len - towrite; +} + +#endif + +static struct super_block *ext3_get_sb(struct file_system_type *fs_type, + int flags, const char *dev_name, void *data) +{ + return get_sb_bdev(fs_type, flags, dev_name, data, ext3_fill_super); +} + +static struct file_system_type ext3_fs_type = { + .owner = THIS_MODULE, + .name = "ext3", + .get_sb = ext3_get_sb, + .kill_sb = kill_block_super, + .fs_flags = FS_REQUIRES_DEV, +}; + +static int __init init_ext3_fs(void) +{ + int err = init_ext3_xattr(); + if (err) + return err; + err = init_inodecache(); + if (err) + goto out1; + err = register_filesystem(&ext3_fs_type); + if (err) + goto out; + return 0; +out: + destroy_inodecache(); +out1: + exit_ext3_xattr(); + return err; +} + +static void __exit exit_ext3_fs(void) +{ + unregister_filesystem(&ext3_fs_type); + destroy_inodecache(); + exit_ext3_xattr(); +} + +MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others"); +MODULE_DESCRIPTION("Second Extended Filesystem with journaling extensions"); +MODULE_LICENSE("GPL"); +module_init(init_ext3_fs) +module_exit(exit_ext3_fs) |