diff options
Diffstat (limited to 'fs')
-rw-r--r-- | fs/Kconfig | 333 | ||||
-rw-r--r-- | fs/Kconfig.binfmt | 22 | ||||
-rw-r--r-- | fs/binfmt_elf.c | 12 | ||||
-rw-r--r-- | fs/buffer.c | 3 | ||||
-rw-r--r-- | fs/cifs/Kconfig | 142 | ||||
-rw-r--r-- | fs/cifs/file.c | 4 | ||||
-rw-r--r-- | fs/exec.c | 7 | ||||
-rw-r--r-- | fs/ext3/balloc.c | 3 | ||||
-rw-r--r-- | fs/ext3/dir.c | 30 | ||||
-rw-r--r-- | fs/ext3/inode.c | 7 | ||||
-rw-r--r-- | fs/ext3/resize.c | 3 | ||||
-rw-r--r-- | fs/ext3/super.c | 16 | ||||
-rw-r--r-- | fs/hfsplus/extents.c | 3 | ||||
-rw-r--r-- | fs/hfsplus/inode.c | 2 | ||||
-rw-r--r-- | fs/jbd/commit.c | 10 | ||||
-rw-r--r-- | fs/jbd/transaction.c | 16 | ||||
-rw-r--r-- | fs/jffs2/Kconfig | 188 | ||||
-rw-r--r-- | fs/jffs2/compr.c | 4 | ||||
-rw-r--r-- | fs/jffs2/dir.c | 2 | ||||
-rw-r--r-- | fs/jffs2/erase.c | 4 | ||||
-rw-r--r-- | fs/jffs2/fs.c | 6 | ||||
-rw-r--r-- | fs/jffs2/nodemgmt.c | 4 | ||||
-rw-r--r-- | fs/jffs2/wbuf.c | 5 | ||||
-rw-r--r-- | fs/nfs/dir.c | 2 | ||||
-rw-r--r-- | fs/ntfs/file.c | 4 | ||||
-rw-r--r-- | fs/proc/proc_misc.c | 85 | ||||
-rw-r--r-- | fs/proc/vmcore.c | 5 | ||||
-rw-r--r-- | fs/ramfs/file-nommu.c | 4 | ||||
-rw-r--r-- | fs/ramfs/inode.c | 1 | ||||
-rw-r--r-- | fs/seq_file.c | 29 |
30 files changed, 543 insertions, 413 deletions
diff --git a/fs/Kconfig b/fs/Kconfig index d0a1174fb51..4eca61c201f 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -1168,195 +1168,7 @@ config EFS_FS To compile the EFS file system support as a module, choose M here: the module will be called efs. -config JFFS2_FS - tristate "Journalling Flash File System v2 (JFFS2) support" - select CRC32 - depends on MTD - help - JFFS2 is the second generation of the Journalling Flash File System - for use on diskless embedded devices. It provides improved wear - levelling, compression and support for hard links. You cannot use - this on normal block devices, only on 'MTD' devices. - - Further information on the design and implementation of JFFS2 is - available at <http://sources.redhat.com/jffs2/>. - -config JFFS2_FS_DEBUG - int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)" - depends on JFFS2_FS - default "0" - help - This controls the amount of debugging messages produced by the JFFS2 - code. Set it to zero for use in production systems. For evaluation, - testing and debugging, it's advisable to set it to one. This will - enable a few assertions and will print debugging messages at the - KERN_DEBUG loglevel, where they won't normally be visible. Level 2 - is unlikely to be useful - it enables extra debugging in certain - areas which at one point needed debugging, but when the bugs were - located and fixed, the detailed messages were relegated to level 2. - - If reporting bugs, please try to have available a full dump of the - messages at debug level 1 while the misbehaviour was occurring. - -config JFFS2_FS_WRITEBUFFER - bool "JFFS2 write-buffering support" - depends on JFFS2_FS - default y - help - This enables the write-buffering support in JFFS2. - - This functionality is required to support JFFS2 on the following - types of flash devices: - - NAND flash - - NOR flash with transparent ECC - - DataFlash - -config JFFS2_FS_WBUF_VERIFY - bool "Verify JFFS2 write-buffer reads" - depends on JFFS2_FS_WRITEBUFFER - default n - help - This causes JFFS2 to read back every page written through the - write-buffer, and check for errors. - -config JFFS2_SUMMARY - bool "JFFS2 summary support (EXPERIMENTAL)" - depends on JFFS2_FS && EXPERIMENTAL - default n - help - This feature makes it possible to use summary information - for faster filesystem mount. - - The summary information can be inserted into a filesystem image - by the utility 'sumtool'. - - If unsure, say 'N'. - -config JFFS2_FS_XATTR - bool "JFFS2 XATTR support (EXPERIMENTAL)" - depends on JFFS2_FS && EXPERIMENTAL - default n - help - Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - <http://acl.bestbits.at/> for details). - - If unsure, say N. - -config JFFS2_FS_POSIX_ACL - bool "JFFS2 POSIX Access Control Lists" - depends on JFFS2_FS_XATTR - default y - select FS_POSIX_ACL - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. - - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website <http://acl.bestbits.at/>. - - If you don't know what Access Control Lists are, say N - -config JFFS2_FS_SECURITY - bool "JFFS2 Security Labels" - depends on JFFS2_FS_XATTR - default y - help - Security labels support alternative access control models - implemented by security modules like SELinux. This option - enables an extended attribute handler for file security - labels in the jffs2 filesystem. - - If you are not using a security module that requires using - extended attributes for file security labels, say N. - -config JFFS2_COMPRESSION_OPTIONS - bool "Advanced compression options for JFFS2" - depends on JFFS2_FS - default n - help - Enabling this option allows you to explicitly choose which - compression modules, if any, are enabled in JFFS2. Removing - compressors can mean you cannot read existing file systems, - and enabling experimental compressors can mean that you - write a file system which cannot be read by a standard kernel. - - If unsure, you should _definitely_ say 'N'. - -config JFFS2_ZLIB - bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS - select ZLIB_INFLATE - select ZLIB_DEFLATE - depends on JFFS2_FS - default y - help - Zlib is designed to be a free, general-purpose, legally unencumbered, - lossless data-compression library for use on virtually any computer - hardware and operating system. See <http://www.gzip.org/zlib/> for - further information. - - Say 'Y' if unsure. - -config JFFS2_LZO - bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS - select LZO_COMPRESS - select LZO_DECOMPRESS - depends on JFFS2_FS - default n - help - minilzo-based compression. Generally works better than Zlib. - - This feature was added in July, 2007. Say 'N' if you need - compatibility with older bootloaders or kernels. - -config JFFS2_RTIME - bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS - depends on JFFS2_FS - default y - help - Rtime does manage to recompress already-compressed data. Say 'Y' if unsure. - -config JFFS2_RUBIN - bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS - depends on JFFS2_FS - default n - help - RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure. - -choice - prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS - default JFFS2_CMODE_PRIORITY - depends on JFFS2_FS - help - You can set here the default compression mode of JFFS2 from - the available compression modes. Don't touch if unsure. - -config JFFS2_CMODE_NONE - bool "no compression" - help - Uses no compression. - -config JFFS2_CMODE_PRIORITY - bool "priority" - help - Tries the compressors in a predefined order and chooses the first - successful one. - -config JFFS2_CMODE_SIZE - bool "size (EXPERIMENTAL)" - help - Tries all compressors and chooses the one which has the smallest - result. - -config JFFS2_CMODE_FAVOURLZO - bool "Favour LZO" - help - Tries all compressors and chooses the one which has the smallest - result but gives some preference to LZO (which has faster - decompression) at the expense of size. - -endchoice - +source "fs/jffs2/Kconfig" # UBIFS File system configuration source "fs/ubifs/Kconfig" @@ -1913,148 +1725,7 @@ config SMB_NLS_REMOTE smbmount from samba 2.2.0 or later supports this. -config CIFS - tristate "CIFS support (advanced network filesystem, SMBFS successor)" - depends on INET - select NLS - help - This is the client VFS module for the Common Internet File System - (CIFS) protocol which is the successor to the Server Message Block - (SMB) protocol, the native file sharing mechanism for most early - PC operating systems. The CIFS protocol is fully supported by - file servers such as Windows 2000 (including Windows 2003, NT 4 - and Windows XP) as well by Samba (which provides excellent CIFS - server support for Linux and many other operating systems). Limited - support for OS/2 and Windows ME and similar servers is provided as - well. - - The cifs module provides an advanced network file system - client for mounting to CIFS compliant servers. It includes - support for DFS (hierarchical name space), secure per-user - session establishment via Kerberos or NTLM or NTLMv2, - safe distributed caching (oplock), optional packet - signing, Unicode and other internationalization improvements. - If you need to mount to Samba or Windows from this machine, say Y. - -config CIFS_STATS - bool "CIFS statistics" - depends on CIFS - help - Enabling this option will cause statistics for each server share - mounted by the cifs client to be displayed in /proc/fs/cifs/Stats - -config CIFS_STATS2 - bool "Extended statistics" - depends on CIFS_STATS - help - Enabling this option will allow more detailed statistics on SMB - request timing to be displayed in /proc/fs/cifs/DebugData and also - allow optional logging of slow responses to dmesg (depending on the - value of /proc/fs/cifs/cifsFYI, see fs/cifs/README for more details). - These additional statistics may have a minor effect on performance - and memory utilization. - - Unless you are a developer or are doing network performance analysis - or tuning, say N. - -config CIFS_WEAK_PW_HASH - bool "Support legacy servers which use weaker LANMAN security" - depends on CIFS - help - Modern CIFS servers including Samba and most Windows versions - (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos) - security mechanisms. These hash the password more securely - than the mechanisms used in the older LANMAN version of the - SMB protocol but LANMAN based authentication is needed to - establish sessions with some old SMB servers. - - Enabling this option allows the cifs module to mount to older - LANMAN based servers such as OS/2 and Windows 95, but such - mounts may be less secure than mounts using NTLM or more recent - security mechanisms if you are on a public network. Unless you - have a need to access old SMB servers (and are on a private - network) you probably want to say N. Even if this support - is enabled in the kernel build, LANMAN authentication will not be - used automatically. At runtime LANMAN mounts are disabled but - can be set to required (or optional) either in - /proc/fs/cifs (see fs/cifs/README for more detail) or via an - option on the mount command. This support is disabled by - default in order to reduce the possibility of a downgrade - attack. - - If unsure, say N. - -config CIFS_UPCALL - bool "Kerberos/SPNEGO advanced session setup" - depends on CIFS && KEYS - help - Enables an upcall mechanism for CIFS which accesses - userspace helper utilities to provide SPNEGO packaged (RFC 4178) - Kerberos tickets which are needed to mount to certain secure servers - (for which more secure Kerberos authentication is required). If - unsure, say N. - -config CIFS_XATTR - bool "CIFS extended attributes" - depends on CIFS - help - Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - <http://acl.bestbits.at/> for details). CIFS maps the name of - extended attributes beginning with the user namespace prefix - to SMB/CIFS EAs. EAs are stored on Windows servers without the - user namespace prefix, but their names are seen by Linux cifs clients - prefaced by the user namespace prefix. The system namespace - (used by some filesystems to store ACLs) is not supported at - this time. - - If unsure, say N. - -config CIFS_POSIX - bool "CIFS POSIX Extensions" - depends on CIFS_XATTR - help - Enabling this option will cause the cifs client to attempt to - negotiate a newer dialect with servers, such as Samba 3.0.5 - or later, that optionally can handle more POSIX like (rather - than Windows like) file behavior. It also enables - support for POSIX ACLs (getfacl and setfacl) to servers - (such as Samba 3.10 and later) which can negotiate - CIFS POSIX ACL support. If unsure, say N. - -config CIFS_DEBUG2 - bool "Enable additional CIFS debugging routines" - depends on CIFS - help - Enabling this option adds a few more debugging routines - to the cifs code which slightly increases the size of - the cifs module and can cause additional logging of debug - messages in some error paths, slowing performance. This - option can be turned off unless you are debugging - cifs problems. If unsure, say N. - -config CIFS_EXPERIMENTAL - bool "CIFS Experimental Features (EXPERIMENTAL)" - depends on CIFS && EXPERIMENTAL - help - Enables cifs features under testing. These features are - experimental and currently include DFS support and directory - change notification ie fcntl(F_DNOTIFY), as well as the upcall - mechanism which will be used for Kerberos session negotiation - and uid remapping. Some of these features also may depend on - setting a value of 1 to the pseudo-file /proc/fs/cifs/Experimental - (which is disabled by default). See the file fs/cifs/README - for more details. If unsure, say N. - -config CIFS_DFS_UPCALL - bool "DFS feature support (EXPERIMENTAL)" - depends on CIFS_EXPERIMENTAL - depends on KEYS - help - Enables an upcall mechanism for CIFS which contacts userspace - helper utilities to provide server name resolution (host names to - IP addresses) which is needed for implicit mounts of DFS junction - points. If unsure, say N. +source "fs/cifs/Kconfig" config NCP_FS tristate "NCP file system support (to mount NetWare volumes)" diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt index 801db134181..ce9fb3fbfae 100644 --- a/fs/Kconfig.binfmt +++ b/fs/Kconfig.binfmt @@ -40,6 +40,28 @@ config BINFMT_ELF_FDPIC It is also possible to run FDPIC ELF binaries on MMU linux also. +config CORE_DUMP_DEFAULT_ELF_HEADERS + bool "Write ELF core dumps with partial segments" + default n + depends on BINFMT_ELF + help + ELF core dump files describe each memory mapping of the crashed + process, and can contain or omit the memory contents of each one. + The contents of an unmodified text mapping are omitted by default. + + For an unmodified text mapping of an ELF object, including just + the first page of the file in a core dump makes it possible to + identify the build ID bits in the file, without paying the i/o + cost and disk space to dump all the text. However, versions of + GDB before 6.7 are confused by ELF core dump files in this format. + + The core dump behavior can be controlled per process using + the /proc/PID/coredump_filter pseudo-file; this setting is + inherited. See Documentation/filesystems/proc.txt for details. + + This config option changes the default setting of coredump_filter + seen at boot time. If unsure, say N. + config BINFMT_FLAT bool "Kernel support for flat binaries" depends on !MMU && (!FRV || BROKEN) diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index c76afa26edf..e2159063198 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -1156,16 +1156,24 @@ static int dump_seek(struct file *file, loff_t off) static unsigned long vma_dump_size(struct vm_area_struct *vma, unsigned long mm_flags) { +#define FILTER(type) (mm_flags & (1UL << MMF_DUMP_##type)) + /* The vma can be set up to tell us the answer directly. */ if (vma->vm_flags & VM_ALWAYSDUMP) goto whole; + /* Hugetlb memory check */ + if (vma->vm_flags & VM_HUGETLB) { + if ((vma->vm_flags & VM_SHARED) && FILTER(HUGETLB_SHARED)) + goto whole; + if (!(vma->vm_flags & VM_SHARED) && FILTER(HUGETLB_PRIVATE)) + goto whole; + } + /* Do not dump I/O mapped devices or special mappings */ if (vma->vm_flags & (VM_IO | VM_RESERVED)) return 0; -#define FILTER(type) (mm_flags & (1UL << MMF_DUMP_##type)) - /* By default, dump shared memory if mapped from an anonymous file. */ if (vma->vm_flags & VM_SHARED) { if (vma->vm_file->f_path.dentry->d_inode->i_nlink == 0 ? diff --git a/fs/buffer.c b/fs/buffer.c index ac78d4c19b3..6569fda5cfe 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -76,8 +76,7 @@ EXPORT_SYMBOL(__lock_buffer); void unlock_buffer(struct buffer_head *bh) { - smp_mb__before_clear_bit(); - clear_buffer_locked(bh); + clear_bit_unlock(BH_Lock, &bh->b_state); smp_mb__after_clear_bit(); wake_up_bit(&bh->b_state, BH_Lock); } diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig new file mode 100644 index 00000000000..341a98965bd --- /dev/null +++ b/fs/cifs/Kconfig @@ -0,0 +1,142 @@ +config CIFS + tristate "CIFS support (advanced network filesystem, SMBFS successor)" + depends on INET + select NLS + help + This is the client VFS module for the Common Internet File System + (CIFS) protocol which is the successor to the Server Message Block + (SMB) protocol, the native file sharing mechanism for most early + PC operating systems. The CIFS protocol is fully supported by + file servers such as Windows 2000 (including Windows 2003, NT 4 + and Windows XP) as well by Samba (which provides excellent CIFS + server support for Linux and many other operating systems). Limited + support for OS/2 and Windows ME and similar servers is provided as + well. + + The cifs module provides an advanced network file system + client for mounting to CIFS compliant servers. It includes + support for DFS (hierarchical name space), secure per-user + session establishment via Kerberos or NTLM or NTLMv2, + safe distributed caching (oplock), optional packet + signing, Unicode and other internationalization improvements. + If you need to mount to Samba or Windows from this machine, say Y. + +config CIFS_STATS + bool "CIFS statistics" + depends on CIFS + help + Enabling this option will cause statistics for each server share + mounted by the cifs client to be displayed in /proc/fs/cifs/Stats + +config CIFS_STATS2 + bool "Extended statistics" + depends on CIFS_STATS + help + Enabling this option will allow more detailed statistics on SMB + request timing to be displayed in /proc/fs/cifs/DebugData and also + allow optional logging of slow responses to dmesg (depending on the + value of /proc/fs/cifs/cifsFYI, see fs/cifs/README for more details). + These additional statistics may have a minor effect on performance + and memory utilization. + + Unless you are a developer or are doing network performance analysis + or tuning, say N. + +config CIFS_WEAK_PW_HASH + bool "Support legacy servers which use weaker LANMAN security" + depends on CIFS + help + Modern CIFS servers including Samba and most Windows versions + (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos) + security mechanisms. These hash the password more securely + than the mechanisms used in the older LANMAN version of the + SMB protocol but LANMAN based authentication is needed to + establish sessions with some old SMB servers. + + Enabling this option allows the cifs module to mount to older + LANMAN based servers such as OS/2 and Windows 95, but such + mounts may be less secure than mounts using NTLM or more recent + security mechanisms if you are on a public network. Unless you + have a need to access old SMB servers (and are on a private + network) you probably want to say N. Even if this support + is enabled in the kernel build, LANMAN authentication will not be + used automatically. At runtime LANMAN mounts are disabled but + can be set to required (or optional) either in + /proc/fs/cifs (see fs/cifs/README for more detail) or via an + option on the mount command. This support is disabled by + default in order to reduce the possibility of a downgrade + attack. + + If unsure, say N. + +config CIFS_UPCALL + bool "Kerberos/SPNEGO advanced session setup" + depends on CIFS && KEYS + help + Enables an upcall mechanism for CIFS which accesses + userspace helper utilities to provide SPNEGO packaged (RFC 4178) + Kerberos tickets which are needed to mount to certain secure servers + (for which more secure Kerberos authentication is required). If + unsure, say N. + +config CIFS_XATTR + bool "CIFS extended attributes" + depends on CIFS + help + Extended attributes are name:value pairs associated with inodes by + the kernel or by users (see the attr(5) manual page, or visit + <http://acl.bestbits.at/> for details). CIFS maps the name of + extended attributes beginning with the user namespace prefix + to SMB/CIFS EAs. EAs are stored on Windows servers without the + user namespace prefix, but their names are seen by Linux cifs clients + prefaced by the user namespace prefix. The system namespace + (used by some filesystems to store ACLs) is not supported at + this time. + + If unsure, say N. + +config CIFS_POSIX + bool "CIFS POSIX Extensions" + depends on CIFS_XATTR + help + Enabling this option will cause the cifs client to attempt to + negotiate a newer dialect with servers, such as Samba 3.0.5 + or later, that optionally can handle more POSIX like (rather + than Windows like) file behavior. It also enables + support for POSIX ACLs (getfacl and setfacl) to servers + (such as Samba 3.10 and later) which can negotiate + CIFS POSIX ACL support. If unsure, say N. + +config CIFS_DEBUG2 + bool "Enable additional CIFS debugging routines" + depends on CIFS + help + Enabling this option adds a few more debugging routines + to the cifs code which slightly increases the size of + the cifs module and can cause additional logging of debug + messages in some error paths, slowing performance. This + option can be turned off unless you are debugging + cifs problems. If unsure, say N. + +config CIFS_EXPERIMENTAL + bool "CIFS Experimental Features (EXPERIMENTAL)" + depends on CIFS && EXPERIMENTAL + help + Enables cifs features under testing. These features are + experimental and currently include DFS support and directory + change notification ie fcntl(F_DNOTIFY), as well as the upcall + mechanism which will be used for Kerberos session negotiation + and uid remapping. Some of these features also may depend on + setting a value of 1 to the pseudo-file /proc/fs/cifs/Experimental + (which is disabled by default). See the file fs/cifs/README + for more details. If unsure, say N. + +config CIFS_DFS_UPCALL + bool "DFS feature support (EXPERIMENTAL)" + depends on CIFS_EXPERIMENTAL + depends on KEYS + help + Enables an upcall mechanism for CIFS which contacts userspace + helper utilities to provide server name resolution (host names to + IP addresses) which is needed for implicit mounts of DFS junction + points. If unsure, say N. diff --git a/fs/cifs/file.c b/fs/cifs/file.c index c4a8a060512..62d8bd8f14c 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1791,7 +1791,7 @@ static void cifs_copy_cache_pages(struct address_space *mapping, SetPageUptodate(page); unlock_page(page); if (!pagevec_add(plru_pvec, page)) - __pagevec_lru_add(plru_pvec); + __pagevec_lru_add_file(plru_pvec); data += PAGE_CACHE_SIZE; } return; @@ -1925,7 +1925,7 @@ static int cifs_readpages(struct file *file, struct address_space *mapping, bytes_read = 0; } - pagevec_lru_add(&lru_pvec); + pagevec_lru_add_file(&lru_pvec); /* need to free smb_read_data buf before exit */ if (smb_read_data) { diff --git a/fs/exec.c b/fs/exec.c index a41e7902ed0..4e834f16d9d 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1386,7 +1386,7 @@ EXPORT_SYMBOL(set_binfmt); * name into corename, which must have space for at least * CORENAME_MAX_SIZE bytes plus one byte for the zero terminator. */ -static int format_corename(char *corename, int nr_threads, long signr) +static int format_corename(char *corename, long signr) { const char *pat_ptr = core_pattern; int ispipe = (*pat_ptr == '|'); @@ -1493,8 +1493,7 @@ static int format_corename(char *corename, int nr_threads, long signr) * If core_pattern does not include a %p (as is the default) * and core_uses_pid is set, then .%pid will be appended to * the filename. Do not do this for piped commands. */ - if (!ispipe && !pid_in_pattern - && (core_uses_pid || nr_threads)) { + if (!ispipe && !pid_in_pattern && core_uses_pid) { rc = snprintf(out_ptr, out_end - out_ptr, ".%d", task_tgid_vnr(current)); if (rc > out_end - out_ptr) @@ -1757,7 +1756,7 @@ int do_coredump(long signr, int exit_code, struct pt_regs * regs) * uses lock_kernel() */ lock_kernel(); - ispipe = format_corename(corename, retval, signr); + ispipe = format_corename(corename, signr); unlock_kernel(); /* * Don't bother to check the RLIMIT_CORE value if core_pattern points diff --git a/fs/ext3/balloc.c b/fs/ext3/balloc.c index 92fd0338a6e..f5b57a2ca35 100644 --- a/fs/ext3/balloc.c +++ b/fs/ext3/balloc.c @@ -1547,6 +1547,7 @@ retry_alloc: * turn off reservation for this allocation */ if (my_rsv && (free_blocks < windowsz) + && (free_blocks > 0) && (rsv_is_empty(&my_rsv->rsv_window))) my_rsv = NULL; @@ -1585,7 +1586,7 @@ retry_alloc: * free blocks is less than half of the reservation * window size. */ - if (free_blocks <= (windowsz/2)) + if (my_rsv && (free_blocks <= (windowsz/2))) continue; brelse(bitmap_bh); diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c index 2eea96ec78e..4c82531ea0a 100644 --- a/fs/ext3/dir.c +++ b/fs/ext3/dir.c @@ -102,6 +102,7 @@ static int ext3_readdir(struct file * filp, int err; struct inode *inode = filp->f_path.dentry->d_inode; int ret = 0; + int dir_has_error = 0; sb = inode->i_sb; @@ -148,9 +149,12 @@ static int ext3_readdir(struct file * filp, * of recovering data when there's a bad sector */ if (!bh) { - ext3_error (sb, "ext3_readdir", - "directory #%lu contains a hole at offset %lu", - inode->i_ino, (unsigned long)filp->f_pos); + if (!dir_has_error) { + ext3_error(sb, __func__, "directory #%lu " + "contains a hole at offset %lld", + inode->i_ino, filp->f_pos); + dir_has_error = 1; + } /* corrupt size? Maybe no more blocks to read */ if (filp->f_pos > inode->i_blocks << 9) break; @@ -410,7 +414,7 @@ static int call_filldir(struct file * filp, void * dirent, get_dtype(sb, fname->file_type)); if (error) { filp->f_pos = curr_pos; - info->extra_fname = fname->next; + info->extra_fname = fname; return error; } fname = fname->next; @@ -449,11 +453,21 @@ static int ext3_dx_readdir(struct file * filp, * If there are any leftover names on the hash collision * chain, return them first. */ - if (info->extra_fname && - call_filldir(filp, dirent, filldir, info->extra_fname)) - goto finished; + if (info->extra_fname) { + if (call_filldir(filp, dirent, filldir, info->extra_fname)) + goto finished; - if (!info->curr_node) + info->extra_fname = NULL; + info->curr_node = rb_next(info->curr_node); + if (!info->curr_node) { + if (info->next_hash == ~0) { + filp->f_pos = EXT3_HTREE_EOF; + goto finished; + } + info->curr_hash = info->next_hash; + info->curr_minor_hash = 0; + } + } else if (!info->curr_node) info->curr_node = rb_first(&info->root); while (1) { diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index ebfec4d0148..f8424ad8997 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -1186,6 +1186,13 @@ write_begin_failed: ext3_journal_stop(handle); unlock_page(page); page_cache_release(page); + /* + * block_write_begin may have instantiated a few blocks + * outside i_size. Trim these off again. Don't need + * i_size_read because we hold i_mutex. + */ + if (pos + len > inode->i_size) + vmtruncate(inode, inode->i_size); } if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries)) goto retry; diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c index 77278e947e9..78fdf383637 100644 --- a/fs/ext3/resize.c +++ b/fs/ext3/resize.c @@ -790,7 +790,8 @@ int ext3_group_add(struct super_block *sb, struct ext3_new_group_data *input) if (reserved_gdb || gdb_off == 0) { if (!EXT3_HAS_COMPAT_FEATURE(sb, - EXT3_FEATURE_COMPAT_RESIZE_INODE)){ + EXT3_FEATURE_COMPAT_RESIZE_INODE) + || !le16_to_cpu(es->s_reserved_gdt_blocks)) { ext3_warning(sb, __func__, "No reserved GDT blocks, can't resize"); return -EPERM; diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 399a96a6c55..3a260af5544 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -625,6 +625,9 @@ static int ext3_show_options(struct seq_file *seq, struct vfsmount *vfs) else if (test_opt(sb, DATA_FLAGS) == EXT3_MOUNT_WRITEBACK_DATA) seq_puts(seq, ",data=writeback"); + if (test_opt(sb, DATA_ERR_ABORT)) + seq_puts(seq, ",data_err=abort"); + ext3_show_quota_options(seq, sb); return 0; @@ -754,6 +757,7 @@ enum { Opt_reservation, Opt_noreservation, Opt_noload, Opt_nobh, Opt_bh, Opt_commit, Opt_journal_update, Opt_journal_inum, Opt_journal_dev, Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback, + Opt_data_err_abort, Opt_data_err_ignore, Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota, Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_quota, Opt_noquota, Opt_ignore, Opt_barrier, Opt_err, Opt_resize, Opt_usrquota, @@ -796,6 +800,8 @@ static const match_table_t tokens = { {Opt_data_journal, "data=journal"}, {Opt_data_ordered, "data=ordered"}, {Opt_data_writeback, "data=writeback"}, + {Opt_data_err_abort, "data_err=abort"}, + {Opt_data_err_ignore, "data_err=ignore"}, {Opt_offusrjquota, "usrjquota="}, {Opt_usrjquota, "usrjquota=%s"}, {Opt_offgrpjquota, "grpjquota="}, @@ -1011,6 +1017,12 @@ static int parse_options (char *options, struct super_block *sb, sbi->s_mount_opt |= data_opt; } break; + case Opt_data_err_abort: + set_opt(sbi->s_mount_opt, DATA_ERR_ABORT); + break; + case Opt_data_err_ignore: + clear_opt(sbi->s_mount_opt, DATA_ERR_ABORT); + break; #ifdef CONFIG_QUOTA case Opt_usrjquota: qtype = USRQUOTA; @@ -1986,6 +1998,10 @@ static void ext3_init_journal_params(struct super_block *sb, journal_t *journal) journal->j_flags |= JFS_BARRIER; else journal->j_flags &= ~JFS_BARRIER; + if (test_opt(sb, DATA_ERR_ABORT)) + journal->j_flags |= JFS_ABORT_ON_SYNCDATA_ERR; + else + journal->j_flags &= ~JFS_ABORT_ON_SYNCDATA_ERR; spin_unlock(&journal->j_state_lock); } diff --git a/fs/hfsplus/extents.c b/fs/hfsplus/extents.c index fec8f61227f..0022eec63cd 100644 --- a/fs/hfsplus/extents.c +++ b/fs/hfsplus/extents.c @@ -199,6 +199,9 @@ int hfsplus_get_block(struct inode *inode, sector_t iblock, goto done; } + if (inode->i_ino == HFSPLUS_EXT_CNID) + return -EIO; + mutex_lock(&HFSPLUS_I(inode).extents_lock); res = hfsplus_ext_read_extent(inode, ablock); if (!res) { diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c index b085d64a2b6..963be644297 100644 --- a/fs/hfsplus/inode.c +++ b/fs/hfsplus/inode.c @@ -254,6 +254,8 @@ static int hfsplus_file_open(struct inode *inode, struct file *file) { if (HFSPLUS_IS_RSRC(inode)) inode = HFSPLUS_I(inode).rsrc_inode; + if (!(file->f_flags & O_LARGEFILE) && i_size_read(inode) > MAX_NON_LFS) + return -EOVERFLOW; atomic_inc(&HFSPLUS_I(inode).opencnt); return 0; } diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c index ae08c057e75..25719d902c5 100644 --- a/fs/jbd/commit.c +++ b/fs/jbd/commit.c @@ -482,6 +482,8 @@ void journal_commit_transaction(journal_t *journal) printk(KERN_WARNING "JBD: Detected IO errors while flushing file data " "on %s\n", bdevname(journal->j_fs_dev, b)); + if (journal->j_flags & JFS_ABORT_ON_SYNCDATA_ERR) + journal_abort(journal, err); err = 0; } @@ -518,9 +520,10 @@ void journal_commit_transaction(journal_t *journal) jh = commit_transaction->t_buffers; /* If we're in abort mode, we just un-journal the buffer and - release it for background writing. */ + release it. */ if (is_journal_aborted(journal)) { + clear_buffer_jbddirty(jh2bh(jh)); JBUFFER_TRACE(jh, "journal is aborting: refile"); journal_refile_buffer(journal, jh); /* If that was the last one, we need to clean up @@ -762,6 +765,9 @@ wait_for_iobuf: /* AKPM: bforget here */ } + if (err) + journal_abort(journal, err); + jbd_debug(3, "JBD: commit phase 6\n"); if (journal_write_commit_record(journal, commit_transaction)) @@ -852,6 +858,8 @@ restart_loop: if (buffer_jbddirty(bh)) { JBUFFER_TRACE(jh, "add to new checkpointing trans"); __journal_insert_checkpoint(jh, commit_transaction); + if (is_journal_aborted(journal)) + clear_buffer_jbddirty(bh); JBUFFER_TRACE(jh, "refile for checkpoint writeback"); __journal_refile_buffer(jh); jbd_unlock_bh_state(bh); diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c index 0540ca27a44..d15cd6e7251 100644 --- a/fs/jbd/transaction.c +++ b/fs/jbd/transaction.c @@ -954,9 +954,10 @@ int journal_dirty_data(handle_t *handle, struct buffer_head *bh) journal_t *journal = handle->h_transaction->t_journal; int need_brelse = 0; struct journal_head *jh; + int ret = 0; if (is_handle_aborted(handle)) - return 0; + return ret; jh = journal_add_journal_head(bh); JBUFFER_TRACE(jh, "entry"); @@ -1067,7 +1068,16 @@ int journal_dirty_data(handle_t *handle, struct buffer_head *bh) time if it is redirtied */ } - /* journal_clean_data_list() may have got there first */ + /* + * We cannot remove the buffer with io error from the + * committing transaction, because otherwise it would + * miss the error and the commit would not abort. + */ + if (unlikely(!buffer_uptodate(bh))) { + ret = -EIO; + goto no_journal; + } + if (jh->b_transaction != NULL) { JBUFFER_TRACE(jh, "unfile from commit"); __journal_temp_unlink_buffer(jh); @@ -1108,7 +1118,7 @@ no_journal: } JBUFFER_TRACE(jh, "exit"); journal_put_journal_head(jh); - return 0; + return ret; } /** diff --git a/fs/jffs2/Kconfig b/fs/jffs2/Kconfig new file mode 100644 index 00000000000..6ae169cd8fa --- /dev/null +++ b/fs/jffs2/Kconfig @@ -0,0 +1,188 @@ +config JFFS2_FS + tristate "Journalling Flash File System v2 (JFFS2) support" + select CRC32 + depends on MTD + help + JFFS2 is the second generation of the Journalling Flash File System + for use on diskless embedded devices. It provides improved wear + levelling, compression and support for hard links. You cannot use + this on normal block devices, only on 'MTD' devices. + + Further information on the design and implementation of JFFS2 is + available at <http://sources.redhat.com/jffs2/>. + +config JFFS2_FS_DEBUG + int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)" + depends on JFFS2_FS + default "0" + help + This controls the amount of debugging messages produced by the JFFS2 + code. Set it to zero for use in production systems. For evaluation, + testing and debugging, it's advisable to set it to one. This will + enable a few assertions and will print debugging messages at the + KERN_DEBUG loglevel, where they won't normally be visible. Level 2 + is unlikely to be useful - it enables extra debugging in certain + areas which at one point needed debugging, but when the bugs were + located and fixed, the detailed messages were relegated to level 2. + + If reporting bugs, please try to have available a full dump of the + messages at debug level 1 while the misbehaviour was occurring. + +config JFFS2_FS_WRITEBUFFER + bool "JFFS2 write-buffering support" + depends on JFFS2_FS + default y + help + This enables the write-buffering support in JFFS2. + + This functionality is required to support JFFS2 on the following + types of flash devices: + - NAND flash + - NOR flash with transparent ECC + - DataFlash + +config JFFS2_FS_WBUF_VERIFY + bool "Verify JFFS2 write-buffer reads" + depends on JFFS2_FS_WRITEBUFFER + default n + help + This causes JFFS2 to read back every page written through the + write-buffer, and check for errors. + +config JFFS2_SUMMARY + bool "JFFS2 summary support (EXPERIMENTAL)" + depends on JFFS2_FS && EXPERIMENTAL + default n + help + This feature makes it possible to use summary information + for faster filesystem mount. + + The summary information can be inserted into a filesystem image + by the utility 'sumtool'. + + If unsure, say 'N'. + +config JFFS2_FS_XATTR + bool "JFFS2 XATTR support (EXPERIMENTAL)" + depends on JFFS2_FS && EXPERIMENTAL + default n + help + Extended attributes are name:value pairs associated with inodes by + the kernel or by users (see the attr(5) manual page, or visit + <http://acl.bestbits.at/> for details). + + If unsure, say N. + +config JFFS2_FS_POSIX_ACL + bool "JFFS2 POSIX Access Control Lists" + depends on JFFS2_FS_XATTR + default y + select FS_POSIX_ACL + help + Posix Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. + + To learn more about Access Control Lists, visit the Posix ACLs for + Linux website <http://acl.bestbits.at/>. + + If you don't know what Access Control Lists are, say N + +config JFFS2_FS_SECURITY + bool "JFFS2 Security Labels" + depends on JFFS2_FS_XATTR + default y + help + Security labels support alternative access control models + implemented by security modules like SELinux. This option + enables an extended attribute handler for file security + labels in the jffs2 filesystem. + + If you are not using a security module that requires using + extended attributes for file security labels, say N. + +config JFFS2_COMPRESSION_OPTIONS + bool "Advanced compression options for JFFS2" + depends on JFFS2_FS + default n + help + Enabling this option allows you to explicitly choose which + compression modules, if any, are enabled in JFFS2. Removing + compressors can mean you cannot read existing file systems, + and enabling experimental compressors can mean that you + write a file system which cannot be read by a standard kernel. + + If unsure, you should _definitely_ say 'N'. + +config JFFS2_ZLIB + bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS + select ZLIB_INFLATE + select ZLIB_DEFLATE + depends on JFFS2_FS + default y + help + Zlib is designed to be a free, general-purpose, legally unencumbered, + lossless data-compression library for use on virtually any computer + hardware and operating system. See <http://www.gzip.org/zlib/> for + further information. + + Say 'Y' if unsure. + +config JFFS2_LZO + bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS + select LZO_COMPRESS + select LZO_DECOMPRESS + depends on JFFS2_FS + default n + help + minilzo-based compression. Generally works better than Zlib. + + This feature was added in July, 2007. Say 'N' if you need + compatibility with older bootloaders or kernels. + +config JFFS2_RTIME + bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS + depends on JFFS2_FS + default y + help + Rtime does manage to recompress already-compressed data. Say 'Y' if unsure. + +config JFFS2_RUBIN + bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS + depends on JFFS2_FS + default n + help + RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure. + +choice + prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS + default JFFS2_CMODE_PRIORITY + depends on JFFS2_FS + help + You can set here the default compression mode of JFFS2 from + the available compression modes. Don't touch if unsure. + +config JFFS2_CMODE_NONE + bool "no compression" + help + Uses no compression. + +config JFFS2_CMODE_PRIORITY + bool "priority" + help + Tries the compressors in a predefined order and chooses the first + successful one. + +config JFFS2_CMODE_SIZE + bool "size (EXPERIMENTAL)" + help + Tries all compressors and chooses the one which has the smallest + result. + +config JFFS2_CMODE_FAVOURLZO + bool "Favour LZO" + help + Tries all compressors and chooses the one which has the smallest + result but gives some preference to LZO (which has faster + decompression) at the expense of size. + +endchoice diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c index 86739ee53b3..f25e70c1b51 100644 --- a/fs/jffs2/compr.c +++ b/fs/jffs2/compr.c @@ -53,8 +53,8 @@ static int jffs2_is_best_compression(struct jffs2_compressor *this, } /* jffs2_compress: - * @data: Pointer to uncompressed data - * @cdata: Pointer to returned pointer to buffer for compressed data + * @data_in: Pointer to uncompressed data + * @cpage_out: Pointer to returned pointer to buffer for compressed data * @datalen: On entry, holds the amount of data available for compression. * On exit, expected to hold the amount of data actually compressed. * @cdatalen: On entry, holds the amount of space available for compressed diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c index cd219ef5525..b1aaae823a5 100644 --- a/fs/jffs2/dir.c +++ b/fs/jffs2/dir.c @@ -311,7 +311,7 @@ static int jffs2_symlink (struct inode *dir_i, struct dentry *dentry, const char /* FIXME: If you care. We'd need to use frags for the target if it grows much more than this */ if (targetlen > 254) - return -EINVAL; + return -ENAMETOOLONG; ri = jffs2_alloc_raw_inode(); diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c index dddb2a6c9e2..259461b910a 100644 --- a/fs/jffs2/erase.c +++ b/fs/jffs2/erase.c @@ -68,7 +68,7 @@ static void jffs2_erase_block(struct jffs2_sb_info *c, instr->len = c->sector_size; instr->callback = jffs2_erase_callback; instr->priv = (unsigned long)(&instr[1]); - instr->fail_addr = 0xffffffff; + instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN; ((struct erase_priv_struct *)instr->priv)->jeb = jeb; ((struct erase_priv_struct *)instr->priv)->c = c; @@ -175,7 +175,7 @@ static void jffs2_erase_failed(struct jffs2_sb_info *c, struct jffs2_eraseblock { /* For NAND, if the failure did not occur at the device level for a specific physical page, don't bother updating the bad block table. */ - if (jffs2_cleanmarker_oob(c) && (bad_offset != 0xffffffff)) { + if (jffs2_cleanmarker_oob(c) && (bad_offset != MTD_FAIL_ADDR_UNKNOWN)) { /* We had a device-level failure to erase. Let's see if we've failed too many times. */ if (!jffs2_write_nand_badblock(c, jeb, bad_offset)) { diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c index 086c4383022..249305d65d5 100644 --- a/fs/jffs2/fs.c +++ b/fs/jffs2/fs.c @@ -207,6 +207,8 @@ int jffs2_statfs(struct dentry *dentry, struct kstatfs *buf) buf->f_files = 0; buf->f_ffree = 0; buf->f_namelen = JFFS2_MAX_NAME_LEN; + buf->f_fsid.val[0] = JFFS2_SUPER_MAGIC; + buf->f_fsid.val[1] = c->mtd->index; spin_lock(&c->erase_completion_lock); avail = c->dirty_size + c->free_size; @@ -440,14 +442,14 @@ struct inode *jffs2_new_inode (struct inode *dir_i, int mode, struct jffs2_raw_i memset(ri, 0, sizeof(*ri)); /* Set OS-specific defaults for new inodes */ - ri->uid = cpu_to_je16(current->fsuid); + ri->uid = cpu_to_je16(current_fsuid()); if (dir_i->i_mode & S_ISGID) { ri->gid = cpu_to_je16(dir_i->i_gid); if (S_ISDIR(mode)) mode |= S_ISGID; } else { - ri->gid = cpu_to_je16(current->fsgid); + ri->gid = cpu_to_je16(current_fsgid()); } /* POSIX ACLs have to be processed now, at least partly. diff --git a/fs/jffs2/nodemgmt.c b/fs/jffs2/nodemgmt.c index a9bf9603c1b..0875b60b4bf 100644 --- a/fs/jffs2/nodemgmt.c +++ b/fs/jffs2/nodemgmt.c @@ -261,6 +261,10 @@ static int jffs2_find_nextblock(struct jffs2_sb_info *c) jffs2_sum_reset_collected(c->summary); /* reset collected summary */ + /* adjust write buffer offset, else we get a non contiguous write bug */ + if (!(c->wbuf_ofs % c->sector_size) && !c->wbuf_len) + c->wbuf_ofs = 0xffffffff; + D1(printk(KERN_DEBUG "jffs2_find_nextblock(): new nextblock = 0x%08x\n", c->nextblock->offset)); return 0; diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c index 0e78b00035e..d9a721e6db7 100644 --- a/fs/jffs2/wbuf.c +++ b/fs/jffs2/wbuf.c @@ -679,10 +679,7 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad) memset(c->wbuf,0xff,c->wbuf_pagesize); /* adjust write buffer offset, else we get a non contiguous write bug */ - if (SECTOR_ADDR(c->wbuf_ofs) == SECTOR_ADDR(c->wbuf_ofs+c->wbuf_pagesize)) - c->wbuf_ofs += c->wbuf_pagesize; - else - c->wbuf_ofs = 0xffffffff; + c->wbuf_ofs += c->wbuf_pagesize; c->wbuf_len = 0; return 0; } diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 2ab70d46ecb..efdba2e802d 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1517,7 +1517,7 @@ static int nfs_symlink(struct inode *dir, struct dentry *dentry, const char *sym if (!add_to_page_cache(page, dentry->d_inode->i_mapping, 0, GFP_KERNEL)) { pagevec_add(&lru_pvec, page); - pagevec_lru_add(&lru_pvec); + pagevec_lru_add_file(&lru_pvec); SetPageUptodate(page); unlock_page(page); } else diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c index d020866d423..3140a4429af 100644 --- a/fs/ntfs/file.c +++ b/fs/ntfs/file.c @@ -439,7 +439,7 @@ static inline int __ntfs_grab_cache_pages(struct address_space *mapping, pages[nr] = *cached_page; page_cache_get(*cached_page); if (unlikely(!pagevec_add(lru_pvec, *cached_page))) - __pagevec_lru_add(lru_pvec); + __pagevec_lru_add_file(lru_pvec); *cached_page = NULL; } index++; @@ -2084,7 +2084,7 @@ err_out: OSYNC_METADATA|OSYNC_DATA); } } - pagevec_lru_add(&lru_pvec); + pagevec_lru_add_file(&lru_pvec); ntfs_debug("Done. Returning %s (written 0x%lx, status %li).", written ? "written" : "status", (unsigned long)written, (long)status); diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c index 59ea42e1ef0..61b25f4eabe 100644 --- a/fs/proc/proc_misc.c +++ b/fs/proc/proc_misc.c @@ -136,6 +136,8 @@ static int meminfo_read_proc(char *page, char **start, off_t off, unsigned long allowed; struct vmalloc_info vmi; long cached; + unsigned long pages[NR_LRU_LISTS]; + int lru; /* * display in kilobytes. @@ -154,51 +156,70 @@ static int meminfo_read_proc(char *page, char **start, off_t off, get_vmalloc_info(&vmi); + for (lru = LRU_BASE; lru < NR_LRU_LISTS; lru++) + pages[lru] = global_page_state(NR_LRU_BASE + lru); + /* * Tagged format, for easy grepping and expansion. */ len = sprintf(page, - "MemTotal: %8lu kB\n" - "MemFree: %8lu kB\n" - "Buffers: %8lu kB\n" - "Cached: %8lu kB\n" - "SwapCached: %8lu kB\n" - "Active: %8lu kB\n" - "Inactive: %8lu kB\n" + "MemTotal: %8lu kB\n" + "MemFree: %8lu kB\n" + "Buffers: %8lu kB\n" + "Cached: %8lu kB\n" + "SwapCached: %8lu kB\n" + "Active: %8lu kB\n" + "Inactive: %8lu kB\n" + "Active(anon): %8lu kB\n" + "Inactive(anon): %8lu kB\n" + "Active(file): %8lu kB\n" + "Inactive(file): %8lu kB\n" +#ifdef CONFIG_UNEVICTABLE_LRU + "Unevictable: %8lu kB\n" + "Mlocked: %8lu kB\n" +#endif #ifdef CONFIG_HIGHMEM - "HighTotal: %8lu kB\n" - "HighFree: %8lu kB\n" - "LowTotal: %8lu kB\n" - "LowFree: %8lu kB\n" + "HighTotal: %8lu kB\n" + "HighFree: %8lu kB\n" + "LowTotal: %8lu kB\n" + "LowFree: %8lu kB\n" #endif - "SwapTotal: %8lu kB\n" - "SwapFree: %8lu kB\n" - "Dirty: %8lu kB\n" - "Writeback: %8lu kB\n" - "AnonPages: %8lu kB\n" - "Mapped: %8lu kB\n" - "Slab: %8lu kB\n" - "SReclaimable: %8lu kB\n" - "SUnreclaim: %8lu kB\n" - "PageTables: %8lu kB\n" + "SwapTotal: %8lu kB\n" + "SwapFree: %8lu kB\n" + "Dirty: %8lu kB\n" + "Writeback: %8lu kB\n" + "AnonPages: %8lu kB\n" + "Mapped: %8lu kB\n" + "Slab: %8lu kB\n" + "SReclaimable: %8lu kB\n" + "SUnreclaim: %8lu kB\n" + "PageTables: %8lu kB\n" #ifdef CONFIG_QUICKLIST - "Quicklists: %8lu kB\n" + "Quicklists: %8lu kB\n" #endif - "NFS_Unstable: %8lu kB\n" - "Bounce: %8lu kB\n" - "WritebackTmp: %8lu kB\n" - "CommitLimit: %8lu kB\n" - "Committed_AS: %8lu kB\n" - "VmallocTotal: %8lu kB\n" - "VmallocUsed: %8lu kB\n" - "VmallocChunk: %8lu kB\n", + "NFS_Unstable: %8lu kB\n" + "Bounce: %8lu kB\n" + "WritebackTmp: %8lu kB\n" + "CommitLimit: %8lu kB\n" + "Committed_AS: %8lu kB\n" + "VmallocTotal: %8lu kB\n" + "VmallocUsed: %8lu kB\n" + "VmallocChunk: %8lu kB\n", K(i.totalram), K(i.freeram), K(i.bufferram), K(cached), K(total_swapcache_pages), - K(global_page_state(NR_ACTIVE)), - K(global_page_state(NR_INACTIVE)), + K(pages[LRU_ACTIVE_ANON] + pages[LRU_ACTIVE_FILE]), + K(pages[LRU_INACTIVE_ANON] + pages[LRU_INACTIVE_FILE]), + K(pages[LRU_ACTIVE_ANON]), + K(pages[LRU_INACTIVE_ANON]), + K(pages[LRU_ACTIVE_FILE]), + K(pages[LRU_INACTIVE_FILE]), +#ifdef CONFIG_UNEVICTABLE_LRU + K(pages[LRU_UNEVICTABLE]), + K(global_page_state(NR_MLOCK)), +#endif #ifdef CONFIG_HIGHMEM K(i.totalhigh), K(i.freehigh), diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c index 841368b87a2..cd9ca67f841 100644 --- a/fs/proc/vmcore.c +++ b/fs/proc/vmcore.c @@ -32,9 +32,6 @@ static size_t elfcorebuf_sz; /* Total size of vmcore file. */ static u64 vmcore_size; -/* Stores the physical address of elf header of crash image. */ -unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX; - struct proc_dir_entry *proc_vmcore = NULL; /* Reads a page from the oldmem device from given offset. */ @@ -647,7 +644,7 @@ static int __init vmcore_init(void) int rc = 0; /* If elfcorehdr= has been passed in cmdline, then capture the dump.*/ - if (!(elfcorehdr_addr < ELFCORE_ADDR_MAX)) + if (!(is_vmcore_usable())) return rc; rc = parse_crash_elf_headers(); if (rc) { diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c index 5145cb9125a..76acdbc3461 100644 --- a/fs/ramfs/file-nommu.c +++ b/fs/ramfs/file-nommu.c @@ -112,12 +112,12 @@ int ramfs_nommu_expand_for_mapping(struct inode *inode, size_t newsize) goto add_error; if (!pagevec_add(&lru_pvec, page)) - __pagevec_lru_add(&lru_pvec); + __pagevec_lru_add_file(&lru_pvec); unlock_page(page); } - pagevec_lru_add(&lru_pvec); + pagevec_lru_add_file(&lru_pvec); return 0; fsize_exceeded: diff --git a/fs/ramfs/inode.c b/fs/ramfs/inode.c index b13123424e4..f031d1c925f 100644 --- a/fs/ramfs/inode.c +++ b/fs/ramfs/inode.c @@ -61,6 +61,7 @@ struct inode *ramfs_get_inode(struct super_block *sb, int mode, dev_t dev) inode->i_mapping->a_ops = &ramfs_aops; inode->i_mapping->backing_dev_info = &ramfs_backing_dev_info; mapping_set_gfp_mask(inode->i_mapping, GFP_HIGHUSER); + mapping_set_unevictable(inode->i_mapping); inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME; switch (mode & S_IFMT) { default: diff --git a/fs/seq_file.c b/fs/seq_file.c index bd20f7f5a93..eba2eabcd2b 100644 --- a/fs/seq_file.c +++ b/fs/seq_file.c @@ -452,17 +452,34 @@ int seq_dentry(struct seq_file *m, struct dentry *dentry, char *esc) int seq_bitmap(struct seq_file *m, unsigned long *bits, unsigned int nr_bits) { - size_t len = bitmap_scnprintf_len(nr_bits); + if (m->count < m->size) { + int len = bitmap_scnprintf(m->buf + m->count, + m->size - m->count, bits, nr_bits); + if (m->count + len < m->size) { + m->count += len; + return 0; + } + } + m->count = m->size; + return -1; +} +EXPORT_SYMBOL(seq_bitmap); - if (m->count + len < m->size) { - bitmap_scnprintf(m->buf + m->count, m->size - m->count, - bits, nr_bits); - m->count += len; - return 0; +int seq_bitmap_list(struct seq_file *m, unsigned long *bits, + unsigned int nr_bits) +{ + if (m->count < m->size) { + int len = bitmap_scnlistprintf(m->buf + m->count, + m->size - m->count, bits, nr_bits); + if (m->count + len < m->size) { + m->count += len; + return 0; + } } m->count = m->size; return -1; } +EXPORT_SYMBOL(seq_bitmap_list); static void *single_start(struct seq_file *p, loff_t *pos) { |