aboutsummaryrefslogtreecommitdiff
path: root/include/asm-alpha/jensen.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-alpha/jensen.h')
-rw-r--r--include/asm-alpha/jensen.h346
1 files changed, 0 insertions, 346 deletions
diff --git a/include/asm-alpha/jensen.h b/include/asm-alpha/jensen.h
deleted file mode 100644
index 964b06ead43..00000000000
--- a/include/asm-alpha/jensen.h
+++ /dev/null
@@ -1,346 +0,0 @@
-#ifndef __ALPHA_JENSEN_H
-#define __ALPHA_JENSEN_H
-
-#include <asm/compiler.h>
-
-/*
- * Defines for the AlphaPC EISA IO and memory address space.
- */
-
-/*
- * NOTE! The memory operations do not set any memory barriers, as it's
- * not needed for cases like a frame buffer that is essentially memory-like.
- * You need to do them by hand if the operations depend on ordering.
- *
- * Similarly, the port IO operations do a "mb" only after a write operation:
- * if an mb is needed before (as in the case of doing memory mapped IO
- * first, and then a port IO operation to the same device), it needs to be
- * done by hand.
- *
- * After the above has bitten me 100 times, I'll give up and just do the
- * mb all the time, but right now I'm hoping this will work out. Avoiding
- * mb's may potentially be a noticeable speed improvement, but I can't
- * honestly say I've tested it.
- *
- * Handling interrupts that need to do mb's to synchronize to non-interrupts
- * is another fun race area. Don't do it (because if you do, I'll have to
- * do *everything* with interrupts disabled, ugh).
- */
-
-/*
- * EISA Interrupt Acknowledge address
- */
-#define EISA_INTA (IDENT_ADDR + 0x100000000UL)
-
-/*
- * FEPROM addresses
- */
-#define EISA_FEPROM0 (IDENT_ADDR + 0x180000000UL)
-#define EISA_FEPROM1 (IDENT_ADDR + 0x1A0000000UL)
-
-/*
- * VL82C106 base address
- */
-#define EISA_VL82C106 (IDENT_ADDR + 0x1C0000000UL)
-
-/*
- * EISA "Host Address Extension" address (bits 25-31 of the EISA address)
- */
-#define EISA_HAE (IDENT_ADDR + 0x1D0000000UL)
-
-/*
- * "SYSCTL" register address
- */
-#define EISA_SYSCTL (IDENT_ADDR + 0x1E0000000UL)
-
-/*
- * "spare" register address
- */
-#define EISA_SPARE (IDENT_ADDR + 0x1F0000000UL)
-
-/*
- * EISA memory address offset
- */
-#define EISA_MEM (IDENT_ADDR + 0x200000000UL)
-
-/*
- * EISA IO address offset
- */
-#define EISA_IO (IDENT_ADDR + 0x300000000UL)
-
-
-#ifdef __KERNEL__
-
-#ifndef __EXTERN_INLINE
-#define __EXTERN_INLINE extern inline
-#define __IO_EXTERN_INLINE
-#endif
-
-/*
- * Handle the "host address register". This needs to be set
- * to the high 7 bits of the EISA address. This is also needed
- * for EISA IO addresses, which are only 16 bits wide (the
- * hae needs to be set to 0).
- *
- * HAE isn't needed for the local IO operations, though.
- */
-
-#define JENSEN_HAE_ADDRESS EISA_HAE
-#define JENSEN_HAE_MASK 0x1ffffff
-
-__EXTERN_INLINE void jensen_set_hae(unsigned long addr)
-{
- /* hae on the Jensen is bits 31:25 shifted right */
- addr >>= 25;
- if (addr != alpha_mv.hae_cache)
- set_hae(addr);
-}
-
-#define vuip volatile unsigned int *
-
-/*
- * IO functions
- *
- * The "local" functions are those that don't go out to the EISA bus,
- * but instead act on the VL82C106 chip directly.. This is mainly the
- * keyboard, RTC, printer and first two serial lines..
- *
- * The local stuff makes for some complications, but it seems to be
- * gone in the PCI version. I hope I can get DEC suckered^H^H^H^H^H^H^H^H
- * convinced that I need one of the newer machines.
- */
-
-static inline unsigned int jensen_local_inb(unsigned long addr)
-{
- return 0xff & *(vuip)((addr << 9) + EISA_VL82C106);
-}
-
-static inline void jensen_local_outb(u8 b, unsigned long addr)
-{
- *(vuip)((addr << 9) + EISA_VL82C106) = b;
- mb();
-}
-
-static inline unsigned int jensen_bus_inb(unsigned long addr)
-{
- long result;
-
- jensen_set_hae(0);
- result = *(volatile int *)((addr << 7) + EISA_IO + 0x00);
- return __kernel_extbl(result, addr & 3);
-}
-
-static inline void jensen_bus_outb(u8 b, unsigned long addr)
-{
- jensen_set_hae(0);
- *(vuip)((addr << 7) + EISA_IO + 0x00) = b * 0x01010101;
- mb();
-}
-
-/*
- * It seems gcc is not very good at optimizing away logical
- * operations that result in operations across inline functions.
- * Which is why this is a macro.
- */
-
-#define jensen_is_local(addr) ( \
-/* keyboard */ (addr == 0x60 || addr == 0x64) || \
-/* RTC */ (addr == 0x170 || addr == 0x171) || \
-/* mb COM2 */ (addr >= 0x2f8 && addr <= 0x2ff) || \
-/* mb LPT1 */ (addr >= 0x3bc && addr <= 0x3be) || \
-/* mb COM2 */ (addr >= 0x3f8 && addr <= 0x3ff))
-
-__EXTERN_INLINE u8 jensen_inb(unsigned long addr)
-{
- if (jensen_is_local(addr))
- return jensen_local_inb(addr);
- else
- return jensen_bus_inb(addr);
-}
-
-__EXTERN_INLINE void jensen_outb(u8 b, unsigned long addr)
-{
- if (jensen_is_local(addr))
- jensen_local_outb(b, addr);
- else
- jensen_bus_outb(b, addr);
-}
-
-__EXTERN_INLINE u16 jensen_inw(unsigned long addr)
-{
- long result;
-
- jensen_set_hae(0);
- result = *(volatile int *) ((addr << 7) + EISA_IO + 0x20);
- result >>= (addr & 3) * 8;
- return 0xffffUL & result;
-}
-
-__EXTERN_INLINE u32 jensen_inl(unsigned long addr)
-{
- jensen_set_hae(0);
- return *(vuip) ((addr << 7) + EISA_IO + 0x60);
-}
-
-__EXTERN_INLINE void jensen_outw(u16 b, unsigned long addr)
-{
- jensen_set_hae(0);
- *(vuip) ((addr << 7) + EISA_IO + 0x20) = b * 0x00010001;
- mb();
-}
-
-__EXTERN_INLINE void jensen_outl(u32 b, unsigned long addr)
-{
- jensen_set_hae(0);
- *(vuip) ((addr << 7) + EISA_IO + 0x60) = b;
- mb();
-}
-
-/*
- * Memory functions.
- */
-
-__EXTERN_INLINE u8 jensen_readb(const volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- long result;
-
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x00);
- result >>= (addr & 3) * 8;
- return 0xffUL & result;
-}
-
-__EXTERN_INLINE u16 jensen_readw(const volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- long result;
-
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- result = *(volatile int *) ((addr << 7) + EISA_MEM + 0x20);
- result >>= (addr & 3) * 8;
- return 0xffffUL & result;
-}
-
-__EXTERN_INLINE u32 jensen_readl(const volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- return *(vuip) ((addr << 7) + EISA_MEM + 0x60);
-}
-
-__EXTERN_INLINE u64 jensen_readq(const volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- unsigned long r0, r1;
-
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- addr = (addr << 7) + EISA_MEM + 0x60;
- r0 = *(vuip) (addr);
- r1 = *(vuip) (addr + (4 << 7));
- return r1 << 32 | r0;
-}
-
-__EXTERN_INLINE void jensen_writeb(u8 b, volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- *(vuip) ((addr << 7) + EISA_MEM + 0x00) = b * 0x01010101;
-}
-
-__EXTERN_INLINE void jensen_writew(u16 b, volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- *(vuip) ((addr << 7) + EISA_MEM + 0x20) = b * 0x00010001;
-}
-
-__EXTERN_INLINE void jensen_writel(u32 b, volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- *(vuip) ((addr << 7) + EISA_MEM + 0x60) = b;
-}
-
-__EXTERN_INLINE void jensen_writeq(u64 b, volatile void __iomem *xaddr)
-{
- unsigned long addr = (unsigned long) xaddr;
- jensen_set_hae(addr);
- addr &= JENSEN_HAE_MASK;
- addr = (addr << 7) + EISA_MEM + 0x60;
- *(vuip) (addr) = b;
- *(vuip) (addr + (4 << 7)) = b >> 32;
-}
-
-__EXTERN_INLINE void __iomem *jensen_ioportmap(unsigned long addr)
-{
- return (void __iomem *)addr;
-}
-
-__EXTERN_INLINE void __iomem *jensen_ioremap(unsigned long addr,
- unsigned long size)
-{
- return (void __iomem *)(addr + 0x100000000ul);
-}
-
-__EXTERN_INLINE int jensen_is_ioaddr(unsigned long addr)
-{
- return (long)addr >= 0;
-}
-
-__EXTERN_INLINE int jensen_is_mmio(const volatile void __iomem *addr)
-{
- return (unsigned long)addr >= 0x100000000ul;
-}
-
-/* New-style ioread interface. All the routines are so ugly for Jensen
- that it doesn't make sense to merge them. */
-
-#define IOPORT(OS, NS) \
-__EXTERN_INLINE unsigned int jensen_ioread##NS(void __iomem *xaddr) \
-{ \
- if (jensen_is_mmio(xaddr)) \
- return jensen_read##OS(xaddr - 0x100000000ul); \
- else \
- return jensen_in##OS((unsigned long)xaddr); \
-} \
-__EXTERN_INLINE void jensen_iowrite##NS(u##NS b, void __iomem *xaddr) \
-{ \
- if (jensen_is_mmio(xaddr)) \
- jensen_write##OS(b, xaddr - 0x100000000ul); \
- else \
- jensen_out##OS(b, (unsigned long)xaddr); \
-}
-
-IOPORT(b, 8)
-IOPORT(w, 16)
-IOPORT(l, 32)
-
-#undef IOPORT
-
-#undef vuip
-
-#undef __IO_PREFIX
-#define __IO_PREFIX jensen
-#define jensen_trivial_rw_bw 0
-#define jensen_trivial_rw_lq 0
-#define jensen_trivial_io_bw 0
-#define jensen_trivial_io_lq 0
-#define jensen_trivial_iounmap 1
-#include <asm/io_trivial.h>
-
-#ifdef __IO_EXTERN_INLINE
-#undef __EXTERN_INLINE
-#undef __IO_EXTERN_INLINE
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* __ALPHA_JENSEN_H */