diff options
Diffstat (limited to 'include/asm-arm/arch-ixp2000/ixp2000-regs.h')
| -rw-r--r-- | include/asm-arm/arch-ixp2000/ixp2000-regs.h | 457 |
1 files changed, 0 insertions, 457 deletions
diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h deleted file mode 100644 index ccae4bec92c..00000000000 --- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h +++ /dev/null @@ -1,457 +0,0 @@ -/* - * include/asm-arm/arch-ixp2000/ixp2000-regs.h - * - * Chipset register definitions for IXP2400/2800 based systems. - * - * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> - * - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corp. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef _IXP2000_REGS_H_ -#define _IXP2000_REGS_H_ - -/* - * IXP2000 linux memory map: - * - * virt phys size - * fb000000 db000000 16M PCI CFG1 - * fc000000 da000000 16M PCI CFG0 - * fd000000 d8000000 16M PCI I/O - * fe[0-7]00000 8M per-platform mappings - * fe900000 80000000 1M SRAM #0 (first MB) - * fea00000 cb400000 1M SCRATCH ring get/put - * feb00000 c8000000 1M MSF - * fec00000 df000000 1M PCI CSRs - * fed00000 de000000 1M PCI CREG - * fee00000 d6000000 1M INTCTL - * fef00000 c0000000 1M CAP - */ - -/* - * Static I/O regions. - * - * Most of the registers are clumped in 4K regions spread throughout - * the 0xc0000000 -> 0xc0100000 address range, but we just map in - * the whole range using a single 1 MB section instead of small - * 4K pages. This has two advantages for us: - * - * 1) We use only one TLB entry for large number of on-chip I/O devices. - * - * 2) We can easily set the Section attributes to XCB=101 on the IXP2400 - * as required per erratum #66. We accomplish this by using a - * new MT_IXP2000_DEVICE memory type with the bits set as required. - * - * CAP stands for CSR Access Proxy. - * - * If you change the virtual address of this mapping, please propagate - * the change to arch/arm/kernel/debug.S, which hardcodes the virtual - * address of the UART located in this region. - */ - -#define IXP2000_CAP_PHYS_BASE 0xc0000000 -#define IXP2000_CAP_VIRT_BASE 0xfef00000 -#define IXP2000_CAP_SIZE 0x00100000 - -/* - * Addresses for specific on-chip peripherals. - */ -#define IXP2000_SLOWPORT_CSR_VIRT_BASE 0xfef80000 -#define IXP2000_GLOBAL_REG_VIRT_BASE 0xfef04000 -#define IXP2000_UART_PHYS_BASE 0xc0030000 -#define IXP2000_UART_VIRT_BASE 0xfef30000 -#define IXP2000_TIMER_VIRT_BASE 0xfef20000 -#define IXP2000_UENGINE_CSR_VIRT_BASE 0xfef18000 -#define IXP2000_GPIO_VIRT_BASE 0xfef10000 - -/* - * Devices outside of the 0xc0000000 -> 0xc0100000 range. The virtual - * addresses of the INTCTL and PCI_CSR mappings are hardcoded in - * entry-macro.S, so if you ever change these please propagate - * the change. - */ -#define IXP2000_INTCTL_PHYS_BASE 0xd6000000 -#define IXP2000_INTCTL_VIRT_BASE 0xfee00000 -#define IXP2000_INTCTL_SIZE 0x00100000 - -#define IXP2000_PCI_CREG_PHYS_BASE 0xde000000 -#define IXP2000_PCI_CREG_VIRT_BASE 0xfed00000 -#define IXP2000_PCI_CREG_SIZE 0x00100000 - -#define IXP2000_PCI_CSR_PHYS_BASE 0xdf000000 -#define IXP2000_PCI_CSR_VIRT_BASE 0xfec00000 -#define IXP2000_PCI_CSR_SIZE 0x00100000 - -#define IXP2000_MSF_PHYS_BASE 0xc8000000 -#define IXP2000_MSF_VIRT_BASE 0xfeb00000 -#define IXP2000_MSF_SIZE 0x00100000 - -#define IXP2000_SCRATCH_RING_PHYS_BASE 0xcb400000 -#define IXP2000_SCRATCH_RING_VIRT_BASE 0xfea00000 -#define IXP2000_SCRATCH_RING_SIZE 0x00100000 - -#define IXP2000_SRAM0_PHYS_BASE 0x80000000 -#define IXP2000_SRAM0_VIRT_BASE 0xfe900000 -#define IXP2000_SRAM0_SIZE 0x00100000 - -#define IXP2000_PCI_IO_PHYS_BASE 0xd8000000 -#define IXP2000_PCI_IO_VIRT_BASE 0xfd000000 -#define IXP2000_PCI_IO_SIZE 0x01000000 - -#define IXP2000_PCI_CFG0_PHYS_BASE 0xda000000 -#define IXP2000_PCI_CFG0_VIRT_BASE 0xfc000000 -#define IXP2000_PCI_CFG0_SIZE 0x01000000 - -#define IXP2000_PCI_CFG1_PHYS_BASE 0xdb000000 -#define IXP2000_PCI_CFG1_VIRT_BASE 0xfb000000 -#define IXP2000_PCI_CFG1_SIZE 0x01000000 - -/* - * Timers - */ -#define IXP2000_TIMER_REG(x) ((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x))) -/* Timer control */ -#define IXP2000_T1_CTL IXP2000_TIMER_REG(0x00) -#define IXP2000_T2_CTL IXP2000_TIMER_REG(0x04) -#define IXP2000_T3_CTL IXP2000_TIMER_REG(0x08) -#define IXP2000_T4_CTL IXP2000_TIMER_REG(0x0c) -/* Store initial value */ -#define IXP2000_T1_CLD IXP2000_TIMER_REG(0x10) -#define IXP2000_T2_CLD IXP2000_TIMER_REG(0x14) -#define IXP2000_T3_CLD IXP2000_TIMER_REG(0x18) -#define IXP2000_T4_CLD IXP2000_TIMER_REG(0x1c) -/* Read current value */ -#define IXP2000_T1_CSR IXP2000_TIMER_REG(0x20) -#define IXP2000_T2_CSR IXP2000_TIMER_REG(0x24) -#define IXP2000_T3_CSR IXP2000_TIMER_REG(0x28) -#define IXP2000_T4_CSR IXP2000_TIMER_REG(0x2c) -/* Clear associated timer interrupt */ -#define IXP2000_T1_CLR IXP2000_TIMER_REG(0x30) -#define IXP2000_T2_CLR IXP2000_TIMER_REG(0x34) -#define IXP2000_T3_CLR IXP2000_TIMER_REG(0x38) -#define IXP2000_T4_CLR IXP2000_TIMER_REG(0x3c) -/* Timer watchdog enable for T4 */ -#define IXP2000_TWDE IXP2000_TIMER_REG(0x40) - -#define WDT_ENABLE 0x00000001 -#define TIMER_DIVIDER_256 0x00000008 -#define TIMER_ENABLE 0x00000080 -#define IRQ_MASK_TIMER1 (1 << 4) - -/* - * Interrupt controller registers - */ -#define IXP2000_INTCTL_REG(x) (volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x)) -#define IXP2000_IRQ_STATUS IXP2000_INTCTL_REG(0x08) -#define IXP2000_IRQ_ENABLE IXP2000_INTCTL_REG(0x10) -#define IXP2000_IRQ_ENABLE_SET IXP2000_INTCTL_REG(0x10) -#define IXP2000_IRQ_ENABLE_CLR IXP2000_INTCTL_REG(0x18) -#define IXP2000_FIQ_ENABLE_CLR IXP2000_INTCTL_REG(0x14) -#define IXP2000_IRQ_ERR_STATUS IXP2000_INTCTL_REG(0x24) -#define IXP2000_IRQ_ERR_ENABLE_SET IXP2000_INTCTL_REG(0x2c) -#define IXP2000_FIQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x30) -#define IXP2000_IRQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x34) -#define IXP2000_IRQ_THD_RAW_STATUS_A_0 IXP2000_INTCTL_REG(0x60) -#define IXP2000_IRQ_THD_RAW_STATUS_A_1 IXP2000_INTCTL_REG(0x64) -#define IXP2000_IRQ_THD_RAW_STATUS_A_2 IXP2000_INTCTL_REG(0x68) -#define IXP2000_IRQ_THD_RAW_STATUS_A_3 IXP2000_INTCTL_REG(0x6c) -#define IXP2000_IRQ_THD_RAW_STATUS_B_0 IXP2000_INTCTL_REG(0x80) -#define IXP2000_IRQ_THD_RAW_STATUS_B_1 IXP2000_INTCTL_REG(0x84) -#define IXP2000_IRQ_THD_RAW_STATUS_B_2 IXP2000_INTCTL_REG(0x88) -#define IXP2000_IRQ_THD_RAW_STATUS_B_3 IXP2000_INTCTL_REG(0x8c) -#define IXP2000_IRQ_THD_STATUS_A_0 IXP2000_INTCTL_REG(0xe0) -#define IXP2000_IRQ_THD_STATUS_A_1 IXP2000_INTCTL_REG(0xe4) -#define IXP2000_IRQ_THD_STATUS_A_2 IXP2000_INTCTL_REG(0xe8) -#define IXP2000_IRQ_THD_STATUS_A_3 IXP2000_INTCTL_REG(0xec) -#define IXP2000_IRQ_THD_STATUS_B_0 IXP2000_INTCTL_REG(0x100) -#define IXP2000_IRQ_THD_STATUS_B_1 IXP2000_INTCTL_REG(0x104) -#define IXP2000_IRQ_THD_STATUS_B_2 IXP2000_INTCTL_REG(0x108) -#define IXP2000_IRQ_THD_STATUS_B_3 IXP2000_INTCTL_REG(0x10c) -#define IXP2000_IRQ_THD_ENABLE_SET_A_0 IXP2000_INTCTL_REG(0x160) -#define IXP2000_IRQ_THD_ENABLE_SET_A_1 IXP2000_INTCTL_REG(0x164) -#define IXP2000_IRQ_THD_ENABLE_SET_A_2 IXP2000_INTCTL_REG(0x168) -#define IXP2000_IRQ_THD_ENABLE_SET_A_3 IXP2000_INTCTL_REG(0x16c) -#define IXP2000_IRQ_THD_ENABLE_SET_B_0 IXP2000_INTCTL_REG(0x180) -#define IXP2000_IRQ_THD_ENABLE_SET_B_1 IXP2000_INTCTL_REG(0x184) -#define IXP2000_IRQ_THD_ENABLE_SET_B_2 IXP2000_INTCTL_REG(0x188) -#define IXP2000_IRQ_THD_ENABLE_SET_B_3 IXP2000_INTCTL_REG(0x18c) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0 IXP2000_INTCTL_REG(0x1e0) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1 IXP2000_INTCTL_REG(0x1e4) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2 IXP2000_INTCTL_REG(0x1e8) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3 IXP2000_INTCTL_REG(0x1ec) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0 IXP2000_INTCTL_REG(0x200) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1 IXP2000_INTCTL_REG(0x204) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2 IXP2000_INTCTL_REG(0x208) -#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3 IXP2000_INTCTL_REG(0x20c) - -/* - * Mask of valid IRQs in the 32-bit IRQ register. We use - * this to mark certain IRQs as being invalid. - */ -#define IXP2000_VALID_IRQ_MASK 0x0f0fffff - -/* - * PCI config register access from core - */ -#define IXP2000_PCI_CREG(x) (volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x)) -#define IXP2000_PCI_CMDSTAT IXP2000_PCI_CREG(0x04) -#define IXP2000_PCI_CSR_BAR IXP2000_PCI_CREG(0x10) -#define IXP2000_PCI_SRAM_BAR IXP2000_PCI_CREG(0x14) -#define IXP2000_PCI_SDRAM_BAR IXP2000_PCI_CREG(0x18) - -/* - * PCI CSRs - */ -#define IXP2000_PCI_CSR(x) (volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x)) - -/* - * PCI outbound interrupts - */ -#define IXP2000_PCI_OUT_INT_STATUS IXP2000_PCI_CSR(0x30) -#define IXP2000_PCI_OUT_INT_MASK IXP2000_PCI_CSR(0x34) -/* - * PCI communications - */ -#define IXP2000_PCI_MAILBOX0 IXP2000_PCI_CSR(0x50) -#define IXP2000_PCI_MAILBOX1 IXP2000_PCI_CSR(0x54) -#define IXP2000_PCI_MAILBOX2 IXP2000_PCI_CSR(0x58) -#define IXP2000_PCI_MAILBOX3 IXP2000_PCI_CSR(0x5C) -#define IXP2000_XSCALE_DOORBELL IXP2000_PCI_CSR(0x60) -#define IXP2000_XSCALE_DOORBELL_SETUP IXP2000_PCI_CSR(0x64) -#define IXP2000_PCI_DOORBELL IXP2000_PCI_CSR(0x70) -#define IXP2000_PCI_DOORBELL_SETUP IXP2000_PCI_CSR(0x74) - -/* - * DMA engines - */ -#define IXP2000_PCI_CH1_BYTE_CNT IXP2000_PCI_CSR(0x80) -#define IXP2000_PCI_CH1_ADDR IXP2000_PCI_CSR(0x84) -#define IXP2000_PCI_CH1_DRAM_ADDR IXP2000_PCI_CSR(0x88) -#define IXP2000_PCI_CH1_DESC_PTR IXP2000_PCI_CSR(0x8C) -#define IXP2000_PCI_CH1_CNTRL IXP2000_PCI_CSR(0x90) -#define IXP2000_PCI_CH1_ME_PARAM IXP2000_PCI_CSR(0x94) -#define IXP2000_PCI_CH2_BYTE_CNT IXP2000_PCI_CSR(0xA0) -#define IXP2000_PCI_CH2_ADDR IXP2000_PCI_CSR(0xA4) -#define IXP2000_PCI_CH2_DRAM_ADDR IXP2000_PCI_CSR(0xA8) -#define IXP2000_PCI_CH2_DESC_PTR IXP2000_PCI_CSR(0xAC) -#define IXP2000_PCI_CH2_CNTRL IXP2000_PCI_CSR(0xB0) -#define IXP2000_PCI_CH2_ME_PARAM IXP2000_PCI_CSR(0xB4) -#define IXP2000_PCI_CH3_BYTE_CNT IXP2000_PCI_CSR(0xC0) -#define IXP2000_PCI_CH3_ADDR IXP2000_PCI_CSR(0xC4) -#define IXP2000_PCI_CH3_DRAM_ADDR IXP2000_PCI_CSR(0xC8) -#define IXP2000_PCI_CH3_DESC_PTR IXP2000_PCI_CSR(0xCC) -#define IXP2000_PCI_CH3_CNTRL IXP2000_PCI_CSR(0xD0) -#define IXP2000_PCI_CH3_ME_PARAM IXP2000_PCI_CSR(0xD4) -#define IXP2000_DMA_INF_MODE IXP2000_PCI_CSR(0xE0) -/* - * Size masks for BARs - */ -#define IXP2000_PCI_SRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0xFC) -#define IXP2000_PCI_DRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0x100) -/* - * Control and uEngine related - */ -#define IXP2000_PCI_CONTROL IXP2000_PCI_CSR(0x13C) -#define IXP2000_PCI_ADDR_EXT IXP2000_PCI_CSR(0x140) -#define IXP2000_PCI_ME_PUSH_STATUS IXP2000_PCI_CSR(0x148) -#define IXP2000_PCI_ME_PUSH_EN IXP2000_PCI_CSR(0x14C) -#define IXP2000_PCI_ERR_STATUS IXP2000_PCI_CSR(0x150) -#define IXP2000_PCI_ERR_ENABLE IXP2000_PCI_CSR(0x154) -/* - * Inbound PCI interrupt control - */ -#define IXP2000_PCI_XSCALE_INT_STATUS IXP2000_PCI_CSR(0x158) -#define IXP2000_PCI_XSCALE_INT_ENABLE IXP2000_PCI_CSR(0x15C) - -#define IXP2000_PCICNTL_PNR (1<<17) /* PCI not Reset bit of PCI_CONTROL */ -#define IXP2000_PCICNTL_PCF (1<<28) /* PCI Central function bit */ -#define IXP2000_XSCALE_INT (1<<1) /* Interrupt from XScale to PCI */ - -/* These are from the IRQ register in the PCI ISR register */ -#define PCI_CONTROL_BE_DEO (1 << 22) /* Big Endian Data Enable Out */ -#define PCI_CONTROL_BE_DEI (1 << 21) /* Big Endian Data Enable In */ -#define PCI_CONTROL_BE_BEO (1 << 20) /* Big Endian Byte Enable Out */ -#define PCI_CONTROL_BE_BEI (1 << 19) /* Big Endian Byte Enable In */ -#define PCI_CONTROL_IEE (1 << 17) /* I/O cycle Endian swap Enable */ - -#define IXP2000_PCI_RST_REL (1 << 2) -#define CFG_RST_DIR (*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF) -#define CFG_PCI_BOOT_HOST (1 << 2) -#define CFG_BOOT_PROM (1 << 1) - -/* - * SlowPort CSRs - * - * The slowport is used to access things like flash, SONET framer control - * ports, slave microprocessors, CPLDs, and others of chip memory mapped - * peripherals. - */ -#define SLOWPORT_CSR(x) (volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x)) - -#define IXP2000_SLOWPORT_CCR SLOWPORT_CSR(0x00) -#define IXP2000_SLOWPORT_WTC1 SLOWPORT_CSR(0x04) -#define IXP2000_SLOWPORT_WTC2 SLOWPORT_CSR(0x08) -#define IXP2000_SLOWPORT_RTC1 SLOWPORT_CSR(0x0c) -#define IXP2000_SLOWPORT_RTC2 SLOWPORT_CSR(0x10) -#define IXP2000_SLOWPORT_FSR SLOWPORT_CSR(0x14) -#define IXP2000_SLOWPORT_PCR SLOWPORT_CSR(0x18) -#define IXP2000_SLOWPORT_ADC SLOWPORT_CSR(0x1C) -#define IXP2000_SLOWPORT_FAC SLOWPORT_CSR(0x20) -#define IXP2000_SLOWPORT_FRM SLOWPORT_CSR(0x24) -#define IXP2000_SLOWPORT_FIN SLOWPORT_CSR(0x28) - -/* - * CCR values. - * The CCR configures the clock division for the slowport interface. - */ -#define SLOWPORT_CCR_DIV_1 0x00 -#define SLOWPORT_CCR_DIV_2 0x01 -#define SLOWPORT_CCR_DIV_4 0x02 -#define SLOWPORT_CCR_DIV_6 0x03 -#define SLOWPORT_CCR_DIV_8 0x04 -#define SLOWPORT_CCR_DIV_10 0x05 -#define SLOWPORT_CCR_DIV_12 0x06 -#define SLOWPORT_CCR_DIV_14 0x07 -#define SLOWPORT_CCR_DIV_16 0x08 -#define SLOWPORT_CCR_DIV_18 0x09 -#define SLOWPORT_CCR_DIV_20 0x0a -#define SLOWPORT_CCR_DIV_22 0x0b -#define SLOWPORT_CCR_DIV_24 0x0c -#define SLOWPORT_CCR_DIV_26 0x0d -#define SLOWPORT_CCR_DIV_28 0x0e -#define SLOWPORT_CCR_DIV_30 0x0f - -/* - * PCR values. PCR configure the mode of the interface. - */ -#define SLOWPORT_MODE_FLASH 0x00 -#define SLOWPORT_MODE_LUCENT 0x01 -#define SLOWPORT_MODE_PMC_SIERRA 0x02 -#define SLOWPORT_MODE_INTEL_UP 0x03 -#define SLOWPORT_MODE_MOTOROLA_UP 0x04 - -/* - * ADC values. Defines data and address bus widths. - */ -#define SLOWPORT_ADDR_WIDTH_8 0x00 -#define SLOWPORT_ADDR_WIDTH_16 0x01 -#define SLOWPORT_ADDR_WIDTH_24 0x02 -#define SLOWPORT_ADDR_WIDTH_32 0x03 -#define SLOWPORT_DATA_WIDTH_8 0x00 -#define SLOWPORT_DATA_WIDTH_16 0x10 -#define SLOWPORT_DATA_WIDTH_24 0x20 -#define SLOWPORT_DATA_WIDTH_32 0x30 - -/* - * Masks and shifts for various fields in the WTC and RTC registers. - */ -#define SLOWPORT_WRTC_MASK_HD 0x0003 -#define SLOWPORT_WRTC_MASK_PW 0x003c -#define SLOWPORT_WRTC_MASK_SU 0x03c0 - -#define SLOWPORT_WRTC_SHIFT_HD 0x00 -#define SLOWPORT_WRTC_SHIFT_SU 0x02 -#define SLOWPORT_WRTC_SHFIT_PW 0x06 - - -/* - * GPIO registers & GPIO interface. - */ -#define IXP2000_GPIO_REG(x) ((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x))) -#define IXP2000_GPIO_PLR IXP2000_GPIO_REG(0x00) -#define IXP2000_GPIO_PDPR IXP2000_GPIO_REG(0x04) -#define IXP2000_GPIO_PDSR IXP2000_GPIO_REG(0x08) -#define IXP2000_GPIO_PDCR IXP2000_GPIO_REG(0x0c) -#define IXP2000_GPIO_POPR IXP2000_GPIO_REG(0x10) -#define IXP2000_GPIO_POSR IXP2000_GPIO_REG(0x14) -#define IXP2000_GPIO_POCR IXP2000_GPIO_REG(0x18) -#define IXP2000_GPIO_REDR IXP2000_GPIO_REG(0x1c) -#define IXP2000_GPIO_FEDR IXP2000_GPIO_REG(0x20) -#define IXP2000_GPIO_EDSR IXP2000_GPIO_REG(0x24) -#define IXP2000_GPIO_LSHR IXP2000_GPIO_REG(0x28) -#define IXP2000_GPIO_LSLR IXP2000_GPIO_REG(0x2c) -#define IXP2000_GPIO_LDSR IXP2000_GPIO_REG(0x30) -#define IXP2000_GPIO_INER IXP2000_GPIO_REG(0x34) -#define IXP2000_GPIO_INSR IXP2000_GPIO_REG(0x38) -#define IXP2000_GPIO_INCR IXP2000_GPIO_REG(0x3c) -#define IXP2000_GPIO_INST IXP2000_GPIO_REG(0x40) - -/* - * "Global" registers...whatever that's supposed to mean. - */ -#define GLOBAL_REG_BASE (IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00) -#define GLOBAL_REG(x) (volatile unsigned long*)(GLOBAL_REG_BASE | (x)) - -#define IXP2000_MAJ_PROD_TYPE_MASK 0x001F0000 -#define IXP2000_MAJ_PROD_TYPE_IXP2000 0x00000000 -#define IXP2000_MIN_PROD_TYPE_MASK 0x0000FF00 -#define IXP2000_MIN_PROD_TYPE_IXP2400 0x00000200 -#define IXP2000_MIN_PROD_TYPE_IXP2850 0x00000100 -#define IXP2000_MIN_PROD_TYPE_IXP2800 0x00000000 -#define IXP2000_MAJ_REV_MASK 0x000000F0 -#define IXP2000_MIN_REV_MASK 0x0000000F -#define IXP2000_PROD_ID_MASK 0xFFFFFFFF - -#define IXP2000_PRODUCT_ID GLOBAL_REG(0x00) -#define IXP2000_MISC_CONTROL GLOBAL_REG(0x04) -#define IXP2000_MSF_CLK_CNTRL GLOBAL_REG(0x08) -#define IXP2000_RESET0 GLOBAL_REG(0x0c) -#define IXP2000_RESET1 GLOBAL_REG(0x10) -#define IXP2000_CCR GLOBAL_REG(0x14) -#define IXP2000_STRAP_OPTIONS GLOBAL_REG(0x18) - -#define RSTALL (1 << 16) -#define WDT_RESET_ENABLE 0x01000000 - - -/* - * MSF registers. The IXP2400 and IXP2800 have somewhat different MSF - * units, but the registers that differ between the two don't overlap, - * so we can have one register list for both. - */ -#define IXP2000_MSF_REG(x) ((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x))) -#define IXP2000_MSF_RX_CONTROL IXP2000_MSF_REG(0x0000) -#define IXP2000_MSF_TX_CONTROL IXP2000_MSF_REG(0x0004) -#define IXP2000_MSF_INTERRUPT_STATUS IXP2000_MSF_REG(0x0008) -#define IXP2000_MSF_INTERRUPT_ENABLE IXP2000_MSF_REG(0x000c) -#define IXP2000_MSF_CSIX_TYPE_MAP IXP2000_MSF_REG(0x0010) -#define IXP2000_MSF_FC_EGRESS_STATUS IXP2000_MSF_REG(0x0014) -#define IXP2000_MSF_FC_INGRESS_STATUS IXP2000_MSF_REG(0x0018) -#define IXP2000_MSF_HWM_CONTROL IXP2000_MSF_REG(0x0024) -#define IXP2000_MSF_FC_STATUS_OVERRIDE IXP2000_MSF_REG(0x0028) -#define IXP2000_MSF_CLOCK_CONTROL IXP2000_MSF_REG(0x002c) -#define IXP2000_MSF_RX_PORT_MAP IXP2000_MSF_REG(0x0040) -#define IXP2000_MSF_RBUF_ELEMENT_DONE IXP2000_MSF_REG(0x0044) -#define IXP2000_MSF_RX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0048) -#define IXP2000_MSF_RX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0048) -#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0 IXP2000_MSF_REG(0x0050) -#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1 IXP2000_MSF_REG(0x0054) -#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2 IXP2000_MSF_REG(0x0058) -#define IXP2000_MSF_TX_SEQUENCE_0 IXP2000_MSF_REG(0x0060) -#define IXP2000_MSF_TX_SEQUENCE_1 IXP2000_MSF_REG(0x0064) -#define IXP2000_MSF_TX_SEQUENCE_2 IXP2000_MSF_REG(0x0068) -#define IXP2000_MSF_TX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0070) -#define IXP2000_MSF_TX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0070) -#define IXP2000_MSF_RX_UP_CONTROL_0 IXP2000_MSF_REG(0x0080) -#define IXP2000_MSF_RX_UP_CONTROL_1 IXP2000_MSF_REG(0x0084) -#define IXP2000_MSF_RX_UP_CONTROL_2 IXP2000_MSF_REG(0x0088) -#define IXP2000_MSF_RX_UP_CONTROL_3 IXP2000_MSF_REG(0x008c) -#define IXP2000_MSF_TX_UP_CONTROL_0 IXP2000_MSF_REG(0x0090) -#define IXP2000_MSF_TX_UP_CONTROL_1 IXP2000_MSF_REG(0x0094) -#define IXP2000_MSF_TX_UP_CONTROL_2 IXP2000_MSF_REG(0x0098) -#define IXP2000_MSF_TX_UP_CONTROL_3 IXP2000_MSF_REG(0x009c) -#define IXP2000_MSF_TRAIN_DATA IXP2000_MSF_REG(0x00a0) -#define IXP2000_MSF_TRAIN_CALENDAR IXP2000_MSF_REG(0x00a4) -#define IXP2000_MSF_TRAIN_FLOW_CONTROL IXP2000_MSF_REG(0x00a8) -#define IXP2000_MSF_TX_CALENDAR_0 IXP2000_MSF_REG(0x1000) -#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS IXP2000_MSF_REG(0x1400) - - -#endif /* _IXP2000_H_ */ |