aboutsummaryrefslogtreecommitdiff
path: root/include/asm-arm/hardware/locomo.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/hardware/locomo.h')
-rw-r--r--include/asm-arm/hardware/locomo.h217
1 files changed, 0 insertions, 217 deletions
diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h
deleted file mode 100644
index fb0645de6f3..00000000000
--- a/include/asm-arm/hardware/locomo.h
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * linux/include/asm-arm/hardware/locomo.h
- *
- * This file contains the definitions for the LoCoMo G/A Chip
- *
- * (C) Copyright 2004 John Lenz
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Based on sa1111.h
- */
-#ifndef _ASM_ARCH_LOCOMO
-#define _ASM_ARCH_LOCOMO
-
-#define locomo_writel(val,addr) ({ *(volatile u16 *)(addr) = (val); })
-#define locomo_readl(addr) (*(volatile u16 *)(addr))
-
-/* LOCOMO version */
-#define LOCOMO_VER 0x00
-
-/* Pin status */
-#define LOCOMO_ST 0x04
-
-/* Pin status */
-#define LOCOMO_C32K 0x08
-
-/* Interrupt controller */
-#define LOCOMO_ICR 0x0C
-
-/* MCS decoder for boot selecting */
-#define LOCOMO_MCSX0 0x10
-#define LOCOMO_MCSX1 0x14
-#define LOCOMO_MCSX2 0x18
-#define LOCOMO_MCSX3 0x1c
-
-/* Touch panel controller */
-#define LOCOMO_ASD 0x20 /* AD start delay */
-#define LOCOMO_HSD 0x28 /* HSYS delay */
-#define LOCOMO_HSC 0x2c /* HSYS period */
-#define LOCOMO_TADC 0x30 /* tablet ADC clock */
-
-
-/* Long time timer */
-#define LOCOMO_LTC 0xd8 /* LTC interrupt setting */
-#define LOCOMO_LTINT 0xdc /* LTC interrupt */
-
-/* DAC control signal for LCD (COMADJ ) */
-#define LOCOMO_DAC 0xe0
-/* DAC control */
-#define LOCOMO_DAC_SCLOEB 0x08 /* SCL pin output data */
-#define LOCOMO_DAC_TEST 0x04 /* Test bit */
-#define LOCOMO_DAC_SDA 0x02 /* SDA pin level (read-only) */
-#define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */
-
-/* SPI interface */
-#define LOCOMO_SPI 0x60
-#define LOCOMO_SPIMD 0x00 /* SPI mode setting */
-#define LOCOMO_SPICT 0x04 /* SPI mode control */
-#define LOCOMO_SPIST 0x08 /* SPI status */
-#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */
-#define LOCOMO_SPI_REND (1 << 2) /* Receive end bit */
-#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */
-#define LOCOMO_SPI_RFR (1) /* read buffer bit */
-
-#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */
-#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */
-#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */
-#define LOCOMO_SPIIR 0x1c /* SPI interrupt request */
-#define LOCOMO_SPITD 0x20 /* SPI transfer data write */
-#define LOCOMO_SPIRD 0x24 /* SPI receive data read */
-#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */
-#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */
-
-/* GPIO */
-#define LOCOMO_GPD 0x90 /* GPIO direction */
-#define LOCOMO_GPE 0x94 /* GPIO input enable */
-#define LOCOMO_GPL 0x98 /* GPIO level */
-#define LOCOMO_GPO 0x9c /* GPIO out data setting */
-#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */
-#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */
-#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */
-#define LOCOMO_GWE 0xac /* GPIO status write enable */
-#define LOCOMO_GIE 0xb0 /* GPIO interrupt enable */
-#define LOCOMO_GIR 0xb4 /* GPIO interrupt request */
-#define LOCOMO_GPIO(Nb) (0x01 << (Nb))
-#define LOCOMO_GPIO_RTS LOCOMO_GPIO(0)
-#define LOCOMO_GPIO_CTS LOCOMO_GPIO(1)
-#define LOCOMO_GPIO_DSR LOCOMO_GPIO(2)
-#define LOCOMO_GPIO_DTR LOCOMO_GPIO(3)
-#define LOCOMO_GPIO_LCD_VSHA_ON LOCOMO_GPIO(4)
-#define LOCOMO_GPIO_LCD_VSHD_ON LOCOMO_GPIO(5)
-#define LOCOMO_GPIO_LCD_VEE_ON LOCOMO_GPIO(6)
-#define LOCOMO_GPIO_LCD_MOD LOCOMO_GPIO(7)
-#define LOCOMO_GPIO_DAC_ON LOCOMO_GPIO(8)
-#define LOCOMO_GPIO_FL_VR LOCOMO_GPIO(9)
-#define LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10)
-#define LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11)
-#define LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12)
-#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
-#define LOCOMO_GPIO_WRITE_PROT LOCOMO_GPIO(14)
-#define LOCOMO_GPIO_CARD_POWER LOCOMO_GPIO(15)
-
-/* Start the definitions of the devices. Each device has an initial
- * base address and a series of offsets from that base address. */
-
-/* Keyboard controller */
-#define LOCOMO_KEYBOARD 0x40
-#define LOCOMO_KIB 0x00 /* KIB level */
-#define LOCOMO_KSC 0x04 /* KSTRB control */
-#define LOCOMO_KCMD 0x08 /* KSTRB command */
-#define LOCOMO_KIC 0x0c /* Key interrupt */
-
-/* Front light adjustment controller */
-#define LOCOMO_FRONTLIGHT 0xc8
-#define LOCOMO_ALS 0x00 /* Adjust light cycle */
-#define LOCOMO_ALD 0x04 /* Adjust light duty */
-
-#define LOCOMO_ALC_EN 0x8000
-
-/* Backlight controller: TFT signal */
-#define LOCOMO_BACKLIGHT 0x38
-#define LOCOMO_TC 0x00 /* TFT control signal */
-#define LOCOMO_CPSD 0x04 /* CPS delay */
-
-/* Audio controller */
-#define LOCOMO_AUDIO 0x54
-#define LOCOMO_ACC 0x00 /* Audio clock */
-#define LOCOMO_PAIF 0xD0 /* PCM audio interface */
-/* Audio clock */
-#define LOCOMO_ACC_XON 0x80
-#define LOCOMO_ACC_XEN 0x40
-#define LOCOMO_ACC_XSEL0 0x00
-#define LOCOMO_ACC_XSEL1 0x20
-#define LOCOMO_ACC_MCLKEN 0x10
-#define LOCOMO_ACC_64FSEN 0x08
-#define LOCOMO_ACC_CLKSEL000 0x00 /* mclk 2 */
-#define LOCOMO_ACC_CLKSEL001 0x01 /* mclk 3 */
-#define LOCOMO_ACC_CLKSEL010 0x02 /* mclk 4 */
-#define LOCOMO_ACC_CLKSEL011 0x03 /* mclk 6 */
-#define LOCOMO_ACC_CLKSEL100 0x04 /* mclk 8 */
-#define LOCOMO_ACC_CLKSEL101 0x05 /* mclk 12 */
-/* PCM audio interface */
-#define LOCOMO_PAIF_SCINV 0x20
-#define LOCOMO_PAIF_SCEN 0x10
-#define LOCOMO_PAIF_LRCRST 0x08
-#define LOCOMO_PAIF_LRCEVE 0x04
-#define LOCOMO_PAIF_LRCINV 0x02
-#define LOCOMO_PAIF_LRCEN 0x01
-
-/* LED controller */
-#define LOCOMO_LED 0xe8
-#define LOCOMO_LPT0 0x00
-#define LOCOMO_LPT1 0x04
-/* LED control */
-#define LOCOMO_LPT_TOFH 0x80
-#define LOCOMO_LPT_TOFL 0x08
-#define LOCOMO_LPT_TOH(TOH) ((TOH & 0x7) << 4)
-#define LOCOMO_LPT_TOL(TOL) ((TOL & 0x7))
-
-extern struct bus_type locomo_bus_type;
-
-#define LOCOMO_DEVID_KEYBOARD 0
-#define LOCOMO_DEVID_FRONTLIGHT 1
-#define LOCOMO_DEVID_BACKLIGHT 2
-#define LOCOMO_DEVID_AUDIO 3
-#define LOCOMO_DEVID_LED 4
-#define LOCOMO_DEVID_UART 5
-#define LOCOMO_DEVID_SPI 6
-
-struct locomo_dev {
- struct device dev;
- unsigned int devid;
- unsigned int irq[1];
-
- void *mapbase;
- unsigned long length;
-
- u64 dma_mask;
-};
-
-#define LOCOMO_DEV(_d) container_of((_d), struct locomo_dev, dev)
-
-#define locomo_get_drvdata(d) dev_get_drvdata(&(d)->dev)
-#define locomo_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p)
-
-struct locomo_driver {
- struct device_driver drv;
- unsigned int devid;
- int (*probe)(struct locomo_dev *);
- int (*remove)(struct locomo_dev *);
- int (*suspend)(struct locomo_dev *, pm_message_t);
- int (*resume)(struct locomo_dev *);
-};
-
-#define LOCOMO_DRV(_d) container_of((_d), struct locomo_driver, drv)
-
-#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name)
-
-void locomo_lcd_power(struct locomo_dev *, int, unsigned int);
-
-int locomo_driver_register(struct locomo_driver *);
-void locomo_driver_unregister(struct locomo_driver *);
-
-/* GPIO control functions */
-void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir);
-int locomo_gpio_read_level(struct device *dev, unsigned int bits);
-int locomo_gpio_read_output(struct device *dev, unsigned int bits);
-void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set);
-
-/* M62332 control function */
-void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
-
-/* Frontlight control */
-void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);
-
-#endif