diff options
Diffstat (limited to 'include/asm-arm')
-rw-r--r-- | include/asm-arm/arch-clps711x/hardware.h | 117 | ||||
-rw-r--r-- | include/asm-arm/arch-clps711x/mp1000-seprom.h | 77 | ||||
-rw-r--r-- | include/asm-arm/arch-iop3xx/iop321.h | 2 | ||||
-rw-r--r-- | include/asm-arm/arch-iop3xx/iop331.h | 2 | ||||
-rw-r--r-- | include/asm-arm/arch-ixp2000/irqs.h | 35 | ||||
-rw-r--r-- | include/asm-arm/arch-pxa/pm.h | 12 | ||||
-rw-r--r-- | include/asm-arm/arch-pxa/tosa.h | 166 | ||||
-rw-r--r-- | include/asm-arm/mmu_context.h | 4 |
8 files changed, 217 insertions, 198 deletions
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h index f864c367c93..1386871e1a5 100644 --- a/include/asm-arm/arch-clps711x/hardware.h +++ b/include/asm-arm/arch-clps711x/hardware.h @@ -235,121 +235,4 @@ #define CEIVA_PB0_BLK_BTN (1<<0) #endif // #if defined (CONFIG_ARCH_CEIVA) -#if defined (CONFIG_MACH_MP1000) -/* NOR FLASH */ -#define MP1000_NIO_BASE 0xf9000000 /* virtual */ -#define MP1000_NIO_START CS0_PHYS_BASE /* physical */ -#define MP1000_NIO_SIZE 0x00400000 - -/* DSP Interface */ -#define MP1000_DSP_BASE 0xfa000000 /* virtual */ -#define MP1000_DSP_START CS1_PHYS_BASE /* physical */ -#define MP1000_DSP_SIZE 0x00100000 - -/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */ -#define MP1000_LIO_BASE 0xfb000000 /* virtual */ -#define MP1000_LIO_START CS2_PHYS_BASE /* physical */ -#define MP1000_LIO_SIZE 0x00100000 - -/* NAND FLASH */ -#define MP1000_FIO_BASE 0xfc000000 /* virtual */ -#define MP1000_FIO_START CS3_PHYS_BASE /* physical */ -#define MP1000_FIO_SIZE 0x00800000 - -/* Ethernet */ -#define MP1000_EIO_BASE 0xfd000000 /* virtual */ -#define MP1000_EIO_START CS4_PHYS_BASE /* physical */ -#define MP1000_EIO_SIZE 0x00100000 - -#define MP1000_LCD_OFFSET 0x00000000 /* LCD offset in CS2 */ -#define MP1000_DDD_OFFSET 0x00001000 /* DAA/DAI/DSP sft reset offst*/ -#define MP1000_RTC_OFFSET 0x00002000 /* RTC offset in CS2 */ -#define MP1000_DAA_OFFSET 0x00003000 /* DAA RW reg offset in CS2 */ - -/* IDE */ -#define MP1000_IDE_BASE 0xfe000000 /* virtual */ -#define MP1000_IDE_START CS5_PHYS_BASE /* physical */ -#define MP1000_IDE_SIZE 0x00100000 /* actually it's only 0x1000 */ - -#define IRQ_HARDDISK IRQ_EINT2 - -/* - * IDE registers definition - */ - -#define IDE_CONTROL_BASE (MP1000_IDE_BASE + 0x1000) -#define IDE_BASE_OFF (MP1000_IDE_BASE) - -#define IDE_WRITE_DEVICE_DATA (IDE_BASE_OFF + 0x0) -#define IDE_FEATURES_REGISTER (IDE_BASE_OFF + 0x2) -#define IDE_SECTOR_COUNT_REGISTER (IDE_BASE_OFF + 0x4) -#define IDE_SECTOR_NUMBER_REGISTER (IDE_BASE_OFF + 0x6) -#define IDE_CYLINDER_LOW_REGISTER (IDE_BASE_OFF + 0x8) -#define IDE_CYLINDER_HIGH_REGISTER (IDE_BASE_OFF + 0xa) -#define IDE_DEVICE_HEAD_REGISTER (IDE_BASE_OFF + 0xc) -#define IDE_COMMAND_DATA_REGISTER (IDE_BASE_OFF + 0xe) -#define IDE_DEVICE_CONTROL_REGISTER (IDE_CONTROL_BASE + 0xc) - -#define IDE_IRQ IRQ_EINT2 - - -#define RTC_PORT(x) (MP1000_LIO_BASE+0x2000 + (x*2)) -#define RTC_ALWAYS_BCD 0 - -/* -// Definitions of the bit fields in the HwPortA register for the -// MP1000 board. -*/ -#define HwPortAKeyboardRow1 0x00000001 -#define HwPortAKeyboardRow2 0x00000002 -#define HwPortAKeyboardRow3 0x00000004 -#define HwPortAKeyboardRow4 0x00000008 -#define HwPortAKeyboardRow5 0x00000010 -#define HwPortAKeyboardRow6 0x00000020 -#define HwPortALCDEnable 0x00000040 -#define HwPortAOffhook 0x00000080 - -/* -// Definitions of the bit fields in the HwPortB register for the -// MP1000 board. -*/ -#define HwPortBL3Mode 0x00000001 -#define HwPortBL3Clk 0x00000002 -#define HwPortBSClk 0x00000001 -#define HwPortBSData 0x00000002 -#define HwPortBL3Data 0x00000004 -#define HwPortBMute 0x00000008 -#define HwPortBQD0 0x00000010 -#define HwPortBQD1 0x00000020 -#define HwPortBQD2 0x00000040 -#define HwPortBQD3 0x00000080 - -/* -// Definitions of the bit fields in the HwPortD register for the -// MP1000 board. -*/ -#define HwPortDLED1 0x00000001 -#define HwPortDLED2 0x00000002 -#define HwPortDLED3 0x00000004 -#define HwPortDLED4 0x00000008 -#define HwPortDLED5 0x00000010 -#define HwPortDEECS 0x00000020 -#define HwPortBRTS 0x00000040 -#define HwPortBRI 0x00000080 - - -/* -// Definitions of the bit fields in the HwPortE register for the -// MP1000 board. -*/ - -#define HwPortECLE 0x00000001 -#define HwPortESepromDOut 0x00000001 -#define HwPortEALE 0x00000002 -#define HwPortESepromDIn 0x00000002 -#define HwPortENANDCS 0x00000004 -#define HwPortESepromCLK 0x00000004 - -#endif // #if defined (CONFIG_MACH_MP1000) - #endif diff --git a/include/asm-arm/arch-clps711x/mp1000-seprom.h b/include/asm-arm/arch-clps711x/mp1000-seprom.h deleted file mode 100644 index 3e5566cf966..00000000000 --- a/include/asm-arm/arch-clps711x/mp1000-seprom.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef MP1000_SEPROM_H -#define MP1000_SEPROM_H - -/* - * mp1000-seprom.h - * - * - * This file contains the Serial EEPROM definitions for the MP1000 board - * - * Copyright (C) 2005 Comdial Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#define COMMAND_ERASE (0x1C0) -#define COMMAND_ERASE_ALL (0x120) -#define COMMAND_WRITE_DISABLE (0x100) -#define COMMAND_WRITE_ENABLE (0x130) -#define COMMAND_READ (0x180) -#define COMMAND_WRITE (0x140) -#define COMMAND_WRITE_ALL (0x110) - -// -// Serial EEPROM data format -// - -#define PACKED __attribute__ ((packed)) - -typedef struct _EEPROM { - union { - unsigned char eprom_byte_data[128]; - unsigned short eprom_short_data[64]; - struct { - unsigned char version PACKED; // EEPROM Version "1" for now - unsigned char box_id PACKED; // Box ID (Standalone, SOHO, embedded, etc) - unsigned char major_hw_version PACKED; // Major Hardware version (Hex) - unsigned char minor_hw_version PACKED; // Minor Hardware Version (Hex) - unsigned char mfg_id[3] PACKED; // Manufacturer ID (3 character Alphabetic) - unsigned char mfg_serial_number[10] PACKED; // Manufacturer Serial number - unsigned char mfg_date[3] PACKED; // Date of Mfg (Formatted YY:MM:DD) - unsigned char country PACKED; // Country of deployment - unsigned char mac_Address[6] PACKED; // MAC Address - unsigned char oem_string[20] PACKED; // OEM ID string - unsigned short feature_bits1 PACKED; // Feature Bits 1 - unsigned short feature_bits2 PACKED; // Feature Bits 2 - unsigned char filler[75] PACKED; // Unused/Undefined “0” initialized - unsigned short checksum PACKED; // byte accumulated short checksum - } eprom_struct; - } variant; -} eeprom_struct; - -/* These settings must be mutually exclusive */ -#define FEATURE_BITS1_DRAMSIZE_16MEG 0x0001 /* 0 signifies 4 MEG system */ -#define FEATURE_BITS1_DRAMSIZE_8MEG 0x0002 /* 1 in bit 1 = 8MEG system */ -#define FEATURE_BITS1_DRAMSIZE_64MEG 0x0004 /* 1 in bit 2 = 64MEG system */ - -#define FEATURE_BITS1_CPUIS90MEG 0x0010 - -extern void seprom_init(void); -extern eeprom_struct* get_seprom_ptr(void); -extern unsigned char* get_eeprom_mac_address(void); - -#endif /* MP1000_SEPROM_H */ - diff --git a/include/asm-arm/arch-iop3xx/iop321.h b/include/asm-arm/arch-iop3xx/iop321.h index 200621ff369..f8df778a356 100644 --- a/include/asm-arm/arch-iop3xx/iop321.h +++ b/include/asm-arm/arch-iop3xx/iop321.h @@ -40,7 +40,7 @@ #define IOP321_PCI_UPPER_IO_BA (IOP321_PCI_LOWER_IO_BA + IOP321_PCI_IO_WINDOW_SIZE - 1) #define IOP321_PCI_IO_OFFSET (IOP321_PCI_LOWER_IO_VA - IOP321_PCI_LOWER_IO_BA) -//#define IOP321_PCI_MEM_WINDOW_SIZE (~*IOP321_IALR1 + 1) +/* #define IOP321_PCI_MEM_WINDOW_SIZE (~*IOP321_IALR1 + 1) */ #define IOP321_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */ #define IOP321_PCI_LOWER_MEM_PA 0x80000000 #define IOP321_PCI_LOWER_MEM_BA (*IOP321_OMWTVR0) diff --git a/include/asm-arm/arch-iop3xx/iop331.h b/include/asm-arm/arch-iop3xx/iop331.h index 96adffd8bad..fbf0cc11bdd 100644 --- a/include/asm-arm/arch-iop3xx/iop331.h +++ b/include/asm-arm/arch-iop3xx/iop331.h @@ -42,7 +42,7 @@ /* this can be 128M if OMWTVR1 is set */ #define IOP331_PCI_MEM_WINDOW_SIZE 0x04000000 /* 64M outbound window */ -//#define IOP331_PCI_MEM_WINDOW_SIZE (~*IOP331_IALR1 + 1) +/* #define IOP331_PCI_MEM_WINDOW_SIZE (~*IOP331_IALR1 + 1) */ #define IOP331_PCI_LOWER_MEM_PA 0x80000000 #define IOP331_PCI_LOWER_MEM_BA (*IOP331_OMWTVR0) #define IOP331_PCI_UPPER_MEM_PA (IOP331_PCI_LOWER_MEM_PA + IOP331_PCI_MEM_WINDOW_SIZE - 1) diff --git a/include/asm-arm/arch-ixp2000/irqs.h b/include/asm-arm/arch-ixp2000/irqs.h index 0deb96c12ad..62f09c7ff42 100644 --- a/include/asm-arm/arch-ixp2000/irqs.h +++ b/include/asm-arm/arch-ixp2000/irqs.h @@ -67,12 +67,45 @@ #define IRQ_IXP2000_PCIA 40 #define IRQ_IXP2000_PCIB 41 -#define NR_IXP2000_IRQS 42 +/* Int sources from IRQ_ERROR_STATUS */ +#define IRQ_IXP2000_DRAM0_MIN_ERR 42 +#define IRQ_IXP2000_DRAM0_MAJ_ERR 43 +#define IRQ_IXP2000_DRAM1_MIN_ERR 44 +#define IRQ_IXP2000_DRAM1_MAJ_ERR 45 +#define IRQ_IXP2000_DRAM2_MIN_ERR 46 +#define IRQ_IXP2000_DRAM2_MAJ_ERR 47 +/* 48-57 reserved */ +#define IRQ_IXP2000_SRAM0_ERR 58 +#define IRQ_IXP2000_SRAM1_ERR 59 +#define IRQ_IXP2000_SRAM2_ERR 60 +#define IRQ_IXP2000_SRAM3_ERR 61 +/* 62-65 reserved */ +#define IRQ_IXP2000_MEDIA_ERR 66 +#define IRQ_IXP2000_PCI_ERR 67 +#define IRQ_IXP2000_SP_INT 68 + +#define NR_IXP2000_IRQS 69 #define IXP2000_BOARD_IRQ(x) (NR_IXP2000_IRQS + (x)) #define IXP2000_BOARD_IRQ_MASK(irq) (1 << (irq - NR_IXP2000_IRQS)) +#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) +#define IXP2000_VALID_ERR_IRQ_MASK (\ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \ + IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT) ) + /* * This allows for all the on-chip sources plus up to 32 CPLD based * IRQs. Should be more than enough. diff --git a/include/asm-arm/arch-pxa/pm.h b/include/asm-arm/arch-pxa/pm.h new file mode 100644 index 00000000000..7a8a1cdf430 --- /dev/null +++ b/include/asm-arm/arch-pxa/pm.h @@ -0,0 +1,12 @@ +/* + * Copyright (c) 2005 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +extern int pxa_pm_prepare(suspend_state_t state); +extern int pxa_pm_enter(suspend_state_t state); +extern int pxa_pm_finish(suspend_state_t state); diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h new file mode 100644 index 00000000000..c3364a2c475 --- /dev/null +++ b/include/asm-arm/arch-pxa/tosa.h @@ -0,0 +1,166 @@ +/* + * Hardware specific definitions for Sharp SL-C6000x series of PDAs + * + * Copyright (c) 2005 Dirk Opfer + * + * Based on Sharp's 2.4 kernel patches + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef _ASM_ARCH_TOSA_H_ +#define _ASM_ARCH_TOSA_H_ 1 + +/* TOSA Chip selects */ +#define TOSA_LCDC_PHYS PXA_CS4_PHYS +/* Internel Scoop */ +#define TOSA_CF_PHYS (PXA_CS2_PHYS + 0x00800000) +/* Jacket Scoop */ +#define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000) + +/* + * SCOOP2 internal GPIOs + */ +#define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 +#define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12 +#define TOSA_SCOOP_IR_POWERDWN SCOOP_GPCR_PA13 +#define TOSA_SCOOP_SD_WP SCOOP_GPCR_PA14 +#define TOSA_SCOOP_PWR_ON SCOOP_GPCR_PA15 +#define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16 +#define TOSA_SCOOP_BT_RESET SCOOP_GPCR_PA17 +#define TOSA_SCOOP_BT_PWR_EN SCOOP_GPCR_PA18 +#define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19 + +/* GPIO Direction 1 : output mode / 0:input mode */ +#define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \ + TOSA_SCOOP_IR_POWERDWN | TOSA_SCOOP_PWR_ON | TOSA_SCOOP_AUD_PWR_ON |\ + TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN ) +/* GPIO out put level when init 1: Hi */ +#define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN ) + +/* + * SCOOP2 jacket GPIOs + */ +#define TOSA_SCOOP_JC_BT_LED SCOOP_GPCR_PA11 +#define TOSA_SCOOP_JC_NOTE_LED SCOOP_GPCR_PA12 +#define TOSA_SCOOP_JC_CHRG_ERR_LED SCOOP_GPCR_PA13 +#define TOSA_SCOOP_JC_USB_PULLUP SCOOP_GPCR_PA14 +#define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15 +#define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16 +#define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 +#define TOSA_SCOOP_JC_WLAN_LED SCOOP_GPCR_PA18 +#define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 + +/* GPIO Direction 1 : output mode / 0:input mode */ +#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \ + TOSA_SCOOP_JC_CHRG_ERR_LED | TOSA_SCOOP_JC_USB_PULLUP | \ + TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \ + TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL ) +/* GPIO out put level when init 1: Hi */ +#define TOSA_SCOOP_JC_IO_OUT ( 0 ) + +/* + * Timing Generator + */ +#define TG_PNLCTL 0x00 +#define TG_TPOSCTL 0x01 +#define TG_DUTYCTL 0x02 +#define TG_GPOSR 0x03 +#define TG_GPODR1 0x04 +#define TG_GPODR2 0x05 +#define TG_PINICTL 0x06 +#define TG_HPOSCTL 0x07 + +/* + * LED + */ +#define TOSA_SCOOP_LED_BLUE TOSA_SCOOP_GPCR_PA11 +#define TOSA_SCOOP_LED_GREEN TOSA_SCOOP_GPCR_PA12 +#define TOSA_SCOOP_LED_ORANGE TOSA_SCOOP_GPCR_PA13 +#define TOSA_SCOOP_LED_WLAN TOSA_SCOOP_GPCR_PA18 + + +/* + * PXA GPIOs + */ +#define TOSA_GPIO_POWERON (0) +#define TOSA_GPIO_RESET (1) +#define TOSA_GPIO_AC_IN (2) +#define TOSA_GPIO_RECORD_BTN (3) +#define TOSA_GPIO_SYNC (4) /* Cradle SYNC Button */ +#define TOSA_GPIO_USB_IN (5) +#define TOSA_GPIO_JACKET_DETECT (7) +#define TOSA_GPIO_nSD_DETECT (9) +#define TOSA_GPIO_nSD_INT (10) +#define TOSA_GPIO_TC6393_CLK (11) +#define TOSA_GPIO_BAT1_CRG (12) +#define TOSA_GPIO_CF_CD (13) +#define TOSA_GPIO_BAT0_CRG (14) +#define TOSA_GPIO_TC6393_INT (15) +#define TOSA_GPIO_BAT0_LOW (17) +#define TOSA_GPIO_TC6393_RDY (18) +#define TOSA_GPIO_ON_RESET (19) +#define TOSA_GPIO_EAR_IN (20) +#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */ +#define TOSA_GPIO_ON_KEY (22) +#define TOSA_GPIO_VGA_LINE (27) +#define TOSA_GPIO_TP_INT (32) /* Touch Panel pen down interrupt */ +#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */ +#define TOSA_GPIO_BAT_LOCKED (38) /* Battery locked */ +#define TOSA_GPIO_TG_SPI_SCLK (81) +#define TOSA_GPIO_TG_SPI_CS (82) +#define TOSA_GPIO_TG_SPI_MOSI (83) +#define TOSA_GPIO_BAT1_LOW (84) + +#define TOSA_GPIO_HP_IN GPIO_EAR_IN + +#define TOSA_GPIO_MAIN_BAT_LOW GPIO_BAT0_LOW + +#define TOSA_KEY_STROBE_NUM (11) +#define TOSA_KEY_SENSE_NUM (7) + +#define TOSA_GPIO_HIGH_STROBE_BIT (0xfc000000) +#define TOSA_GPIO_LOW_STROBE_BIT (0x0000001f) +#define TOSA_GPIO_ALL_SENSE_BIT (0x00000fe0) +#define TOSA_GPIO_ALL_SENSE_RSHIFT (5) +#define TOSA_GPIO_STROBE_BIT(a) GPIO_bit(58+(a)) +#define TOSA_GPIO_SENSE_BIT(a) GPIO_bit(69+(a)) +#define TOSA_GAFR_HIGH_STROBE_BIT (0xfff00000) +#define TOSA_GAFR_LOW_STROBE_BIT (0x000003ff) +#define TOSA_GAFR_ALL_SENSE_BIT (0x00fffc00) +#define TOSA_GPIO_KEY_SENSE(a) (69+(a)) +#define TOSA_GPIO_KEY_STROBE(a) (58+(a)) + +/* + * Interrupts + */ +#define TOSA_IRQ_GPIO_WAKEUP IRQ_GPIO(TOSA_GPIO_WAKEUP) +#define TOSA_IRQ_GPIO_AC_IN IRQ_GPIO(TOSA_GPIO_AC_IN) +#define TOSA_IRQ_GPIO_RECORD_BTN IRQ_GPIO(TOSA_GPIO_RECORD_BTN) +#define TOSA_IRQ_GPIO_SYNC IRQ_GPIO(TOSA_GPIO_SYNC) +#define TOSA_IRQ_GPIO_USB_IN IRQ_GPIO(TOSA_GPIO_USB_IN) +#define TOSA_IRQ_GPIO_JACKET_DETECT IRQ_GPIO(TOSA_GPIO_JACKET_DETECT) +#define TOSA_IRQ_GPIO_nSD_INT IRQ_GPIO(TOSA_GPIO_nSD_INT) +#define TOSA_IRQ_GPIO_nSD_DETECT IRQ_GPIO(TOSA_GPIO_nSD_DETECT) +#define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG) +#define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD) +#define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG) +#define TOSA_IRQ_GPIO_TC6393_INT IRQ_GPIO(TOSA_GPIO_TC6393_INT) +#define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW) +#define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN) +#define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ) +#define TOSA_IRQ_GPIO_ON_KEY IRQ_GPIO(TOSA_GPIO_ON_KEY) +#define TOSA_IRQ_GPIO_VGA_LINE IRQ_GPIO(TOSA_GPIO_VGA_LINE) +#define TOSA_IRQ_GPIO_TP_INT IRQ_GPIO(TOSA_GPIO_TP_INT) +#define TOSA_IRQ_GPIO_JC_CF_IRQ IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ) +#define TOSA_IRQ_GPIO_BAT_LOCKED IRQ_GPIO(TOSA_GPIO_BAT_LOCKED) +#define TOSA_IRQ_GPIO_BAT1_LOW IRQ_GPIO(TOSA_GPIO_BAT1_LOW) +#define TOSA_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(69+(a)) + +#define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW) + +extern struct platform_device tosascoop_jc_device; +extern struct platform_device tosascoop_device; +#endif /* _ASM_ARCH_TOSA_H_ */ diff --git a/include/asm-arm/mmu_context.h b/include/asm-arm/mmu_context.h index 4af9c411c61..3d4b810d8c3 100644 --- a/include/asm-arm/mmu_context.h +++ b/include/asm-arm/mmu_context.h @@ -13,6 +13,7 @@ #ifndef __ASM_ARM_MMU_CONTEXT_H #define __ASM_ARM_MMU_CONTEXT_H +#include <asm/cacheflush.h> #include <asm/proc-fns.h> #if __LINUX_ARM_ARCH__ >= 6 @@ -86,7 +87,8 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next, cpu_set(cpu, next->cpu_vm_mask); check_context(next); cpu_switch_mm(next->pgd, next); - cpu_clear(cpu, prev->cpu_vm_mask); + if (cache_is_vivt()) + cpu_clear(cpu, prev->cpu_vm_mask); } } |