diff options
Diffstat (limited to 'include/asm-arm')
118 files changed, 3850 insertions, 1949 deletions
diff --git a/include/asm-arm/arch-at91/at91_ecc.h b/include/asm-arm/arch-at91/at91_ecc.h index ff93df516d6..1e5a8caca2d 100644 --- a/include/asm-arm/arch-at91/at91_ecc.h +++ b/include/asm-arm/arch-at91/at91_ecc.h @@ -13,26 +13,26 @@ #ifndef AT91_ECC_H #define AT91_ECC_H -#define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */ +#define AT91_ECC_CR 0x00 /* Control register */ #define AT91_ECC_RST (1 << 0) /* Reset parity */ -#define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */ +#define AT91_ECC_MR 0x04 /* Mode register */ #define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */ #define AT91_ECC_PAGESIZE_528 (0) #define AT91_ECC_PAGESIZE_1056 (1) #define AT91_ECC_PAGESIZE_2112 (2) #define AT91_ECC_PAGESIZE_4224 (3) -#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */ +#define AT91_ECC_SR 0x08 /* Status register */ #define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */ #define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */ #define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */ -#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */ +#define AT91_ECC_PR 0x0c /* Parity register */ #define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */ #define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */ -#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */ +#define AT91_ECC_NPR 0x10 /* NParity register */ #define AT91_ECC_NPARITY (0xffff << 0) /* NParity */ #endif diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h index 52cd8e5dabc..c2b13c28015 100644 --- a/include/asm-arm/arch-at91/at91_pmc.h +++ b/include/asm-arm/arch-at91/at91_pmc.h @@ -76,10 +76,17 @@ #define AT91_PMC_PRES_32 (5 << 2) #define AT91_PMC_PRES_64 (6 << 2) #define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ -#define AT91_PMC_MDIV_1 (0 << 8) -#define AT91_PMC_MDIV_2 (1 << 8) -#define AT91_PMC_MDIV_3 (2 << 8) -#define AT91_PMC_MDIV_4 (3 << 8) +#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */ +#define AT91RM9200_PMC_MDIV_2 (1 << 8) +#define AT91RM9200_PMC_MDIV_3 (2 << 8) +#define AT91RM9200_PMC_MDIV_4 (3 << 8) +#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */ +#define AT91SAM9_PMC_MDIV_2 (1 << 8) +#define AT91SAM9_PMC_MDIV_4 (2 << 8) +#define AT91SAM9_PMC_MDIV_6 (3 << 8) +#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */ +#define AT91_PMC_PDIV_1 (0 << 12) +#define AT91_PMC_PDIV_2 (1 << 12) #define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ diff --git a/include/asm-arm/arch-at91/at91_shdwc.h b/include/asm-arm/arch-at91/at91_shdwc.h index 01b433de227..581fa41d90e 100644 --- a/include/asm-arm/arch-at91/at91_shdwc.h +++ b/include/asm-arm/arch-at91/at91_shdwc.h @@ -24,10 +24,12 @@ #define AT91_SHDW_WKMODE0_LOW 2 #define AT91_SHDW_WKMODE0_ANYLEVEL 3 #define AT91_SHDW_CPTWK0 (0xf << 4) /* Counter On Wake Up 0 */ +#define AT91_SHDW_CPTWK0_(x) ((x) << 4) #define AT91_SHDW_RTTWKEN (1 << 16) /* Real Time Timer Wake-up Enable */ #define AT91_SHDW_SR (AT91_SHDWC + 0x08) /* Shut Down Status Register */ #define AT91_SHDW_WAKEUP0 (1 << 0) /* Wake-up 0 Status */ #define AT91_SHDW_RTTWK (1 << 16) /* Real-time Timer Wake-up */ +#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */ #endif diff --git a/include/asm-arm/arch-at91/at91cap9_ddrsdr.h b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h new file mode 100644 index 00000000000..efdb23af1ee --- /dev/null +++ b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h @@ -0,0 +1,100 @@ +/* + * include/asm-arm/arch-at91/at91cap9_ddrsdr.h + * + * DDR/SDR Controller (DDRSDRC) - System peripherals registers. + * Based on AT91CAP9 datasheet revision B. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91CAP9_DDRSDR_H +#define AT91CAP9_DDRSDR_H + +#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */ +#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */ +#define AT91_DDRSDRC_MODE_NORMAL 0 +#define AT91_DDRSDRC_MODE_NOP 1 +#define AT91_DDRSDRC_MODE_PRECHARGE 2 +#define AT91_DDRSDRC_MODE_LMR 3 +#define AT91_DDRSDRC_MODE_REFRESH 4 +#define AT91_DDRSDRC_MODE_EXT_LMR 5 +#define AT91_DDRSDRC_MODE_DEEP 6 + +#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */ +#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ + +#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */ +#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ +#define AT91_DDRSDRC_NC_SDR8 (0 << 0) +#define AT91_DDRSDRC_NC_SDR9 (1 << 0) +#define AT91_DDRSDRC_NC_SDR10 (2 << 0) +#define AT91_DDRSDRC_NC_SDR11 (3 << 0) +#define AT91_DDRSDRC_NC_DDR9 (0 << 0) +#define AT91_DDRSDRC_NC_DDR10 (1 << 0) +#define AT91_DDRSDRC_NC_DDR11 (2 << 0) +#define AT91_DDRSDRC_NC_DDR12 (3 << 0) +#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_DDRSDRC_NR_11 (0 << 2) +#define AT91_DDRSDRC_NR_12 (1 << 2) +#define AT91_DDRSDRC_NR_13 (2 << 2) +#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ +#define AT91_DDRSDRC_CAS_2 (2 << 4) +#define AT91_DDRSDRC_CAS_3 (3 << 4) +#define AT91_DDRSDRC_CAS_25 (6 << 4) +#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */ +#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ + +#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */ +#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ +#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ +#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ +#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ +#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ +#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ +#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ +#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ + +#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */ +#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ +#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ +#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ +#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ + +#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */ +#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ +#define AT91_DDRSDRC_LPCB_DISABLE 0 +#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 +#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 +#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 +#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ +#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ +#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ +#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ +#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ +#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) +#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) +#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) + +#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */ +#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ +#define AT91_DDRSDRC_MD_SDR 0 +#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 +#define AT91_DDRSDRC_MD_DDR 2 +#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 + +#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */ +#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ +#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ +#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ +#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ +#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ +#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ +#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ +#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ +#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ + + +#endif diff --git a/include/asm-arm/arch-at91/at91sam926x_mc.h b/include/asm-arm/arch-at91/at91sam9_sdramc.h index d82631c251f..d3b8b3da6b4 100644 --- a/include/asm-arm/arch-at91/at91sam926x_mc.h +++ b/include/asm-arm/arch-at91/at91sam9_sdramc.h @@ -1,7 +1,7 @@ /* - * include/asm-arm/arch-at91/at91sam926x_mc.h + * include/asm-arm/arch-at91/at91sam9_sdramc.h * - * Memory Controllers (SMC, SDRAMC) - System peripherals registers. + * SDRAM Controllers (SDRAMC) - System peripherals registers. * Based on AT91SAM9261 datasheet revision D. * * This program is free software; you can redistribute it and/or modify @@ -10,8 +10,8 @@ * (at your option) any later version. */ -#ifndef AT91SAM926x_MC_H -#define AT91SAM926x_MC_H +#ifndef AT91SAM9_SDRAMC_H +#define AT91SAM9_SDRAMC_H /* SDRAM Controller (SDRAMC) registers */ #define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ @@ -62,7 +62,7 @@ #define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 #define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ #define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */ +#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */ #define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ #define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) #define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) @@ -80,62 +80,4 @@ #define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 -/* Static Memory Controller (SMC) registers */ -#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ -#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ -#define AT91_SMC_NWESETUP_(x) ((x) << 0) -#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ -#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) -#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ -#define AT91_SMC_NRDSETUP_(x) ((x) << 16) -#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ -#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) - -#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ -#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ -#define AT91_SMC_NWEPULSE_(x) ((x) << 0) -#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ -#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) -#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ -#define AT91_SMC_NRDPULSE_(x) ((x) << 16) -#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ -#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) - -#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ -#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ -#define AT91_SMC_NWECYCLE_(x) ((x) << 0) -#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ -#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) - -#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ -#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ -#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ -#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ -#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) -#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) -#define AT91_SMC_EXNWMODE_READY (3 << 4) -#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ -#define AT91_SMC_BAT_SELECT (0 << 8) -#define AT91_SMC_BAT_WRITE (1 << 8) -#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ -#define AT91_SMC_DBW_8 (0 << 12) -#define AT91_SMC_DBW_16 (1 << 12) -#define AT91_SMC_DBW_32 (2 << 12) -#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ -#define AT91_SMC_TDF_(x) ((x) << 16) -#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ -#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ -#define AT91_SMC_PS (3 << 28) /* Page Size */ -#define AT91_SMC_PS_4 (0 << 28) -#define AT91_SMC_PS_8 (1 << 28) -#define AT91_SMC_PS_16 (2 << 28) -#define AT91_SMC_PS_32 (3 << 28) - -#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ -#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ -#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ -#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ -#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ -#endif - #endif diff --git a/include/asm-arm/arch-at91/at91sam9_smc.h b/include/asm-arm/arch-at91/at91sam9_smc.h new file mode 100644 index 00000000000..9e49eed31e5 --- /dev/null +++ b/include/asm-arm/arch-at91/at91sam9_smc.h @@ -0,0 +1,73 @@ +/* + * include/asm-arm/arch-at91/at91sam9_smc.h + * + * Static Memory Controllers (SMC) - System peripherals registers. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9_SMC_H +#define AT91SAM9_SMC_H + +#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ +#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ +#define AT91_SMC_NWESETUP_(x) ((x) << 0) +#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ +#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) +#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ +#define AT91_SMC_NRDSETUP_(x) ((x) << 16) +#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ +#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) + +#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ +#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ +#define AT91_SMC_NWEPULSE_(x) ((x) << 0) +#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ +#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) +#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ +#define AT91_SMC_NRDPULSE_(x) ((x) << 16) +#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ +#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) + +#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ +#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ +#define AT91_SMC_NWECYCLE_(x) ((x) << 0) +#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ +#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) + +#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ +#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ +#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ +#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ +#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) +#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) +#define AT91_SMC_EXNWMODE_READY (3 << 4) +#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ +#define AT91_SMC_BAT_SELECT (0 << 8) +#define AT91_SMC_BAT_WRITE (1 << 8) +#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ +#define AT91_SMC_DBW_8 (0 << 12) +#define AT91_SMC_DBW_16 (1 << 12) +#define AT91_SMC_DBW_32 (2 << 12) +#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ +#define AT91_SMC_TDF_(x) ((x) << 16) +#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ +#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ +#define AT91_SMC_PS (3 << 28) /* Page Size */ +#define AT91_SMC_PS_4 (0 << 28) +#define AT91_SMC_PS_8 (1 << 28) +#define AT91_SMC_PS_16 (2 << 28) +#define AT91_SMC_PS_32 (3 << 28) + +#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ +#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ +#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ +#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ +#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ +#endif + +#endif diff --git a/include/asm-arm/arch-ep93xx/gpio.h b/include/asm-arm/arch-ep93xx/gpio.h index 9b1864bbd9a..186e7c715f8 100644 --- a/include/asm-arm/arch-ep93xx/gpio.h +++ b/include/asm-arm/arch-ep93xx/gpio.h @@ -101,30 +101,17 @@ /* new generic GPIO API - see Documentation/gpio.txt */ -static inline int gpio_request(unsigned gpio, const char *label) -{ - if (gpio > EP93XX_GPIO_LINE_MAX) - return -EINVAL; - return 0; -} +#include <asm-generic/gpio.h> -static inline void gpio_free(unsigned gpio) -{ -} - -int gpio_direction_input(unsigned gpio); -int gpio_direction_output(unsigned gpio, int value); -int gpio_get_value(unsigned gpio); -void gpio_set_value(unsigned gpio, int value); - -#include <asm-generic/gpio.h> /* cansleep wrappers */ +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep /* * Map GPIO A0..A7 (0..7) to irq 64..71, * B0..B7 (7..15) to irq 72..79, and * F0..F7 (16..24) to irq 80..87. */ - static inline int gpio_to_irq(unsigned gpio) { if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ) diff --git a/include/asm-arm/arch-iop13xx/adma.h b/include/asm-arm/arch-iop13xx/adma.h index efd9a5eb100..90d14ee564f 100644 --- a/include/asm-arm/arch-iop13xx/adma.h +++ b/include/asm-arm/arch-iop13xx/adma.h @@ -454,11 +454,6 @@ static inline void iop_chan_append(struct iop_adma_chan *chan) __raw_writel(adma_accr, ADMA_ACCR(chan)); } -static inline void iop_chan_idle(int busy, struct iop_adma_chan *chan) -{ - do { } while (0); -} - static inline u32 iop_chan_get_status(struct iop_adma_chan *chan) { return __raw_readl(ADMA_ACSR(chan)); diff --git a/include/asm-arm/arch-ks8695/devices.h b/include/asm-arm/arch-ks8695/devices.h index b0364dce463..7ad2c656e16 100644 --- a/include/asm-arm/arch-ks8695/devices.h +++ b/include/asm-arm/arch-ks8695/devices.h @@ -18,6 +18,11 @@ extern void __init ks8695_add_device_wan(void); extern void __init ks8695_add_device_lan(void); extern void __init ks8695_add_device_hpna(void); + /* LEDs */ +extern short ks8695_leds_cpu; +extern short ks8695_leds_timer; +extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led); + /* PCI */ #define KS8695_MODE_PCI 0 #define KS8695_MODE_MINIPCI 1 diff --git a/include/asm-arm/arch-mxc/board-mx31ads.h b/include/asm-arm/arch-mxc/board-mx31ads.h index be29b83ad4a..8590127760a 100644 --- a/include/asm-arm/arch-mxc/board-mx31ads.h +++ b/include/asm-arm/arch-mxc/board-mx31ads.h @@ -11,107 +11,77 @@ #ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__ #define __ASM_ARCH_MXC_BOARD_MX31ADS_H__ -/*! - * @name PBC Controller parameters - */ -/*! @{ */ -/*! - * Base address of PBC controller - */ +/* Base address of PBC controller */ #define PBC_BASE_ADDRESS IO_ADDRESS(CS4_BASE_ADDR) /* Offsets for the PBC Controller register */ -/*! - * PBC Board status register offset - */ + +/* PBC Board status register offset */ #define PBC_BSTAT 0x000002 -/*! - * PBC Board control register 1 set address. - */ + +/* PBC Board control register 1 set address */ #define PBC_BCTRL1_SET 0x000004 -/*! - * PBC Board control register 1 clear address. - */ + +/* PBC Board control register 1 clear address */ #define PBC_BCTRL1_CLEAR 0x000006 -/*! - * PBC Board control register 2 set address. - */ + +/* PBC Board control register 2 set address */ #define PBC_BCTRL2_SET 0x000008 -/*! - * PBC Board control register 2 clear address. - */ + +/* PBC Board control register 2 clear address */ #define PBC_BCTRL2_CLEAR 0x00000A -/*! - * PBC Board control register 3 set address. - */ + +/* PBC Board control register 3 set address */ #define PBC_BCTRL3_SET 0x00000C -/*! - * PBC Board control register 3 clear address. - */ + +/* PBC Board control register 3 clear address */ #define PBC_BCTRL3_CLEAR 0x00000E -/*! - * PBC Board control register 4 set address. - */ + +/* PBC Board control register 4 set address */ #define PBC_BCTRL4_SET 0x000010 -/*! - * PBC Board control register 4 clear address. - */ + +/* PBC Board control register 4 clear address */ #define PBC_BCTRL4_CLEAR 0x000012 -/*! - * PBC Board status register 1. - */ + +/* PBC Board status register 1 */ #define PBC_BSTAT1 0x000014 -/*! - * PBC Board interrupt status register. - */ + +/* PBC Board interrupt status register */ #define PBC_INTSTATUS 0x000016 -/*! - * PBC Board interrupt current status register. - */ + +/* PBC Board interrupt current status register */ #define PBC_INTCURR_STATUS 0x000018 -/*! - * PBC Interrupt mask register set address. - */ + +/* PBC Interrupt mask register set address */ #define PBC_INTMASK_SET 0x00001A -/*! - * PBC Interrupt mask register clear address. - */ + +/* PBC Interrupt mask register clear address */ #define PBC_INTMASK_CLEAR 0x00001C -/*! - * External UART A. - */ +/* External UART A */ #define PBC_SC16C652_UARTA 0x010000 -/*! - * External UART B. - */ + +/* External UART B */ #define PBC_SC16C652_UARTB 0x010010 -/*! - * Ethernet Controller IO base address. - */ + +/* Ethernet Controller IO base address */ #define PBC_CS8900A_IOBASE 0x020000 -/*! - * Ethernet Controller Memory base address. - */ + +/* Ethernet Controller Memory base address */ #define PBC_CS8900A_MEMBASE 0x021000 -/*! - * Ethernet Controller DMA base address. - */ + +/* Ethernet Controller DMA base address */ #define PBC_CS8900A_DMABASE 0x022000 -/*! - * External chip select 0. - */ + +/* External chip select 0 */ #define PBC_XCS0 0x040000 -/*! - * LCD Display enable. - */ + +/* LCD Display enable */ #define PBC_LCD_EN_B 0x060000 -/*! - * Code test debug enable. - */ + +/* Code test debug enable */ #define PBC_CODE_B 0x070000 -/*! - * PSRAM memory select. - */ + +/* PSRAM memory select */ #define PBC_PSRAM_B 0x5000000 #define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) @@ -139,4 +109,4 @@ #define MXC_MAX_EXP_IO_LINES 16 -#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ +#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */ diff --git a/include/asm-arm/arch-mxc/dma.h b/include/asm-arm/arch-mxc/dma.h index 65e639d51d2..c822d569a05 100644 --- a/include/asm-arm/arch-mxc/dma.h +++ b/include/asm-arm/arch-mxc/dma.h @@ -11,11 +11,4 @@ #ifndef __ASM_ARCH_MXC_DMA_H__ #define __ASM_ARCH_MXC_DMA_H__ -/*! - * @file dma.h - * @brief This file contains Unified DMA API for all MXC platforms. - * The API is platform independent. - * - * @ingroup SDMA - */ #endif diff --git a/include/asm-arm/arch-mxc/hardware.h b/include/asm-arm/arch-mxc/hardware.h index 3c09b92fef0..e87ff0679d5 100644 --- a/include/asm-arm/arch-mxc/hardware.h +++ b/include/asm-arm/arch-mxc/hardware.h @@ -8,45 +8,24 @@ * published by the Free Software Foundation. */ -/*! - * @file hardware.h - * @brief This file contains the hardware definitions of the board. - * - * @ingroup System - */ #ifndef __ASM_ARCH_MXC_HARDWARE_H__ #define __ASM_ARCH_MXC_HARDWARE_H__ #include <asm/sizes.h> -#include <asm/arch/mx31.h> +#ifdef CONFIG_ARCH_MX3 +# include <asm/arch/mx31.h> +#endif #include <asm/arch/mxc.h> -#define MXC_MAX_GPIO_LINES (GPIO_NUM_PIN * GPIO_PORT_NUM) - /* * --------------------------------------------------------------------------- * Board specific defines * --------------------------------------------------------------------------- */ -#define MXC_EXP_IO_BASE (MXC_GPIO_INT_BASE + MXC_MAX_GPIO_LINES) - -#include <asm/arch/board-mx31ads.h> - -#ifndef MXC_MAX_EXP_IO_LINES -#define MXC_MAX_EXP_IO_LINES 0 +#ifdef CONFIG_MACH_MX31ADS +# include <asm/arch/board-mx31ads.h> #endif -#define MXC_MAX_VIRTUAL_INTS 16 -#define MXC_VIRTUAL_INTS_BASE (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES) -#define MXC_SDIO1_CARD_IRQ MXC_VIRTUAL_INTS_BASE -#define MXC_SDIO2_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 1) -#define MXC_SDIO3_CARD_IRQ (MXC_VIRTUAL_INTS_BASE + 2) - -#define MXC_MAX_INTS (MXC_MAX_INT_LINES + \ - MXC_MAX_GPIO_LINES + \ - MXC_MAX_EXP_IO_LINES + \ - MXC_MAX_VIRTUAL_INTS) - -#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ +#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */ diff --git a/include/asm-arm/arch-mxc/io.h b/include/asm-arm/arch-mxc/io.h index cf6c83a4b9f..65b6810124c 100644 --- a/include/asm-arm/arch-mxc/io.h +++ b/include/asm-arm/arch-mxc/io.h @@ -8,24 +8,13 @@ * published by the Free Software Foundation. */ -/*! - * @file io.h - * @brief This file contains some memory mapping macros. - * @note There is no real ISA or PCI buses. But have to define these macros - * for some drivers to compile. - * - * @ingroup System - */ - #ifndef __ASM_ARCH_MXC_IO_H__ #define __ASM_ARCH_MXC_IO_H__ -/*! Allow IO space to be anywhere in the memory */ +/* Allow IO space to be anywhere in the memory */ #define IO_SPACE_LIMIT 0xffffffff -/*! - * io address mapping macro - */ +/* io address mapping macro */ #define __io(a) ((void __iomem *)(a)) #define __mem_pci(a) (a) diff --git a/include/asm-arm/arch-mxc/irqs.h b/include/asm-arm/arch-mxc/irqs.h index e4686c6bc4b..b2c5205e196 100644 --- a/include/asm-arm/arch-mxc/irqs.h +++ b/include/asm-arm/arch-mxc/irqs.h @@ -13,26 +13,17 @@ #include <asm/hardware.h> -/*! - * @file irqs.h - * @brief This file defines the number of normal interrupts and fast interrupts - * - * @ingroup Interrupt - */ - #define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) #define MXC_IRQ_TO_GPIO(irq) ((irq) - MXC_GPIO_INT_BASE) #define MXC_GPIO_TO_IRQ(x) (MXC_GPIO_INT_BASE + x) -/*! - * Number of normal interrupts - */ -#define NR_IRQS MXC_MAX_INTS +/* Number of normal interrupts */ +#define NR_IRQS (MXC_MAX_INT_LINES + \ + MXC_MAX_GPIO_LINES + \ + MXC_MAX_VIRTUAL_INTS) -/*! - * Number of fast interrupts - */ +/* Number of fast interrupts */ #define NR_FIQS MXC_MAX_INTS -#endif /* __ASM_ARCH_MXC_IRQS_H__ */ +#endif /* __ASM_ARCH_MXC_IRQS_H__ */ diff --git a/include/asm-arm/arch-mxc/memory.h b/include/asm-arm/arch-mxc/memory.h index c89aac83a40..059f83023a1 100644 --- a/include/asm-arm/arch-mxc/memory.h +++ b/include/asm-arm/arch-mxc/memory.h @@ -13,24 +13,17 @@ #include <asm/hardware.h> -/*! - * @file memory.h - * @brief This file contains macros needed by the Linux kernel and drivers. - * - * @ingroup Memory - */ - -/*! +/* * Virtual view <-> DMA view memory address translations * This macro is used to translate the virtual address to an address * suitable to be passed to set_dma_addr() */ #define __virt_to_bus(a) __virt_to_phys(a) -/*! +/* * Used to convert an address for DMA operations to an address that the * kernel can use. */ #define __bus_to_virt(a) __phys_to_virt(a) -#endif /* __ASM_ARCH_MXC_MEMORY_H__ */ +#endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/include/asm-arm/arch-mxc/mx31.h b/include/asm-arm/arch-mxc/mx31.h index 85c49c9e5d1..36a1af495bb 100644 --- a/include/asm-arm/arch-mxc/mx31.h +++ b/include/asm-arm/arch-mxc/mx31.h @@ -317,6 +317,8 @@ #define MXC_MAX_INT_LINES 64 #define MXC_GPIO_INT_BASE MXC_MAX_INT_LINES +#define MXC_MAX_GPIO_LINES (GPIO_NUM_PIN * GPIO_PORT_NUM) +#define MXC_MAX_VIRTUAL_INTS 16 /*! * Number of GPIO port as defined in the IC Spec @@ -329,7 +331,33 @@ #define PROD_SIGNATURE 0x1 /* For MX31 */ +/* silicon revisions specific to i.MX31 */ +#define CHIP_REV_1_0 0x10 +#define CHIP_REV_1_1 0x11 +#define CHIP_REV_1_2 0x12 +#define CHIP_REV_1_3 0x13 +#define CHIP_REV_2_0 0x20 +#define CHIP_REV_2_1 0x21 +#define CHIP_REV_2_2 0x22 +#define CHIP_REV_2_3 0x23 +#define CHIP_REV_3_0 0x30 +#define CHIP_REV_3_1 0x31 +#define CHIP_REV_3_2 0x32 + #define SYSTEM_REV_MIN CHIP_REV_1_0 #define SYSTEM_REV_NUM 3 -#endif /* __ASM_ARCH_MXC_MX31_H__ */ +#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) + +/* this is a i.MX31 CPU */ +#define cpu_is_mx31() (1) + +extern unsigned int system_rev; + +static inline int mx31_revision(void) +{ + return system_rev; +} +#endif + +#endif /* __ASM_ARCH_MXC_MX31_H__ */ diff --git a/include/asm-arm/arch-mxc/mxc.h b/include/asm-arm/arch-mxc/mxc.h index 0837f1f9ca3..146d3f60951 100644 --- a/include/asm-arm/arch-mxc/mxc.h +++ b/include/asm-arm/arch-mxc/mxc.h @@ -15,6 +15,11 @@ #error "Do not include directly." #endif +/* clean up all things that are not used */ +#ifndef CONFIG_ARCH_MX3 +# define cpu_is_mx31() (0) +#endif + /* ***************************************** * GPT Register definitions * @@ -31,9 +36,7 @@ #define MXC_GPT_GPTICR2 IO_ADDRESS(GPT1_BASE_ADDR + 0x20) #define MXC_GPT_GPTCNT IO_ADDRESS(GPT1_BASE_ADDR + 0x24) -/*! - * GPT Control register bit definitions - */ +/* GPT Control register bit definitions */ #define GPTCR_FO3 (1 << 31) #define GPTCR_FO2 (1 << 30) #define GPTCR_FO1 (1 << 29) @@ -146,4 +149,4 @@ #define IIM_PROD_REV_SH 3 #define IIM_PROD_REV_LEN 5 -#endif /* __ASM_ARCH_MXC_H__ */ +#endif /* __ASM_ARCH_MXC_H__ */ diff --git a/include/asm-arm/arch-mxc/system.h b/include/asm-arm/arch-mxc/system.h index 109956b41ac..bbfc37465fc 100644 --- a/include/asm-arm/arch-mxc/system.h +++ b/include/asm-arm/arch-mxc/system.h @@ -21,30 +21,14 @@ #ifndef __ASM_ARCH_MXC_SYSTEM_H__ #define __ASM_ARCH_MXC_SYSTEM_H__ -/*! - * @file system.h - * @brief This file contains idle and reset functions. - * - * @ingroup System - */ - -/*! - * This function puts the CPU into idle mode. It is called by default_idle() - * in process.c file. - */ static inline void arch_idle(void) { cpu_do_idle(); } -/* - * This function resets the system. It is called by machine_restart(). - * - * @param mode indicates different kinds of resets - */ static inline void arch_reset(char mode) { cpu_reset(0); } -#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ +#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */ diff --git a/include/asm-arm/arch-mxc/vmalloc.h b/include/asm-arm/arch-mxc/vmalloc.h index 83a73da895e..62d97623412 100644 --- a/include/asm-arm/arch-mxc/vmalloc.h +++ b/include/asm-arm/arch-mxc/vmalloc.h @@ -20,17 +20,7 @@ #ifndef __ASM_ARCH_MXC_VMALLOC_H__ #define __ASM_ARCH_MXC_VMALLOC_H__ -/*! - * @file vmalloc.h - * - * @brief This file contains platform specific macros for vmalloc. - * - * @ingroup System - */ - -/*! - * vmalloc ending address - */ +/* vmalloc ending address */ #define VMALLOC_END 0xF4000000 -#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */ +#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */ diff --git a/include/asm-arm/arch-ns9xxx/board.h b/include/asm-arm/arch-ns9xxx/board.h index 716f34fdb71..e57443bdbbd 100644 --- a/include/asm-arm/arch-ns9xxx/board.h +++ b/include/asm-arm/arch-ns9xxx/board.h @@ -1,7 +1,7 @@ /* * include/asm-arm/arch-ns9xxx/board.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -13,8 +13,30 @@ #include <asm/mach-types.h> -#define board_is_a9m9750dev() (machine_is_cc9p9360dev()) +#define board_is_a9m9750dev() (0 \ + || machine_is_cc9p9360dev() \ + || machine_is_cc9p9750dev() \ + ) -#define board_is_jscc9p9360() (machine_is_cc9p9360js()) +#define board_is_a9mvali() (0 \ + || machine_is_cc9p9360val() \ + || machine_is_cc9p9750val() \ + ) + +#define board_is_jscc9p9210() (0 \ + || machine_is_cc9p9210js() \ + ) + +#define board_is_jscc9p9215() (0 \ + || machine_is_cc9p9215js() \ + ) + +#define board_is_jscc9p9360() (0 \ + || machine_is_cc9p9360js() \ + ) + +#define board_is_uncbas() (0 \ + || machine_is_cc7ucamry() \ + ) #endif /* ifndef __ASM_ARCH_BOARD_H */ diff --git a/include/asm-arm/arch-ns9xxx/clock.h b/include/asm-arm/arch-ns9xxx/clock.h deleted file mode 100644 index b943d3a92a1..00000000000 --- a/include/asm-arm/arch-ns9xxx/clock.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * include/asm-arm/arch-ns9xxx/clock.h - * - * Copyright (C) 2007 by Digi International Inc. - * All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __ASM_ARCH_CLOCK_H -#define __ASM_ARCH_CLOCK_H - -#include <asm/arch-ns9xxx/regs-sys.h> - -#define CRYSTAL 29491200 /* Hz */ - -/* The HRM calls this value f_vco */ -static inline u32 ns9xxx_systemclock(void) __attribute__((const)); -static inline u32 ns9xxx_systemclock(void) -{ - u32 pll = __raw_readl(SYS_PLL); - - /* - * The system clock should be a multiple of HZ * TIMERCLOCKSELECT (in - * time.c). - * - * The following values are given: - * - TIMERCLOCKSELECT == 2^i for an i in {0 .. 6} - * - CRYSTAL == 29491200 == 2^17 * 3^2 * 5^2 - * - ND in {0 .. 31} - * - FS in {0 .. 3} - * - * Assuming the worst, we consider: - * - TIMERCLOCKSELECT == 64 - * - ND == 0 - * - FS == 3 - * - * So HZ should be a divisor of: - * (CRYSTAL * (ND + 1) >> FS) / TIMERCLOCKSELECT - * == (2^17 * 3^2 * 5^2 * 1 >> 3) / 64 - * == 2^8 * 3^2 * 5^2 - * == 57600 - * - * Currently HZ is defined to be 100 for this platform. - * - * Fine. - */ - return CRYSTAL * (REGGETIM(pll, SYS_PLL, ND) + 1) - >> REGGETIM(pll, SYS_PLL, FS); -} - -static inline u32 ns9xxx_cpuclock(void) __attribute__((const)); -static inline u32 ns9xxx_cpuclock(void) -{ - return ns9xxx_systemclock() / 2; -} - -static inline u32 ns9xxx_ahbclock(void) __attribute__((const)); -static inline u32 ns9xxx_ahbclock(void) -{ - return ns9xxx_systemclock() / 4; -} - -static inline u32 ns9xxx_bbusclock(void) __attribute__((const)); -static inline u32 ns9xxx_bbusclock(void) -{ - return ns9xxx_systemclock() / 8; -} - -#endif /* ifndef __ASM_ARCH_CLOCK_H */ diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S index 86aec87303e..89a21c53046 100644 --- a/include/asm-arm/arch-ns9xxx/entry-macro.S +++ b/include/asm-arm/arch-ns9xxx/entry-macro.S @@ -1,7 +1,7 @@ /* * include/asm-arm/arch-ns9xxx/entry-macro.S * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -9,16 +9,16 @@ * the Free Software Foundation. */ #include <asm/hardware.h> -#include <asm/arch-ns9xxx/regs-sys.h> +#include <asm/arch-ns9xxx/regs-sys-common.h> .macro get_irqnr_preamble, base, tmp + ldr \base, =SYS_ISRADDR .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =SYS_ISRADDR ldr \irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)] cmp \irqstat, #0 ldrne \irqnr, [\base] diff --git a/include/asm-arm/arch-ns9xxx/irqs.h b/include/asm-arm/arch-ns9xxx/irqs.h index 25d8d28b27f..e83d48ec42c 100644 --- a/include/asm-arm/arch-ns9xxx/irqs.h +++ b/include/asm-arm/arch-ns9xxx/irqs.h @@ -1,7 +1,7 @@ /* * include/asm-arm/arch-ns9xxx/irqs.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -11,38 +11,39 @@ #ifndef __ASM_ARCH_IRQS_H #define __ASM_ARCH_IRQS_H -#define IRQ_WATCHDOG 0 -#define IRQ_AHBBUSERR 1 -#define IRQ_BBUSAGG 2 +/* NetSilicon 9360 */ +#define IRQ_NS9XXX_WATCHDOG 0 +#define IRQ_NS9XXX_AHBBUSERR 1 +#define IRQ_NS9360_BBUSAGG 2 /* irq 3 is reserved for NS9360 */ -#define IRQ_ETHRX 4 -#define IRQ_ETHTX 5 -#define IRQ_ETHPHY 6 -#define IRQ_LCD 7 -#define IRQ_SERBRX 8 -#define IRQ_SERBTX 9 -#define IRQ_SERARX 10 -#define IRQ_SERATX 11 -#define IRQ_SERCRX 12 -#define IRQ_SERCTX 13 -#define IRQ_I2C 14 -#define IRQ_BBUSDMA 15 -#define IRQ_TIMER0 16 -#define IRQ_TIMER1 17 -#define IRQ_TIMER2 18 -#define IRQ_TIMER3 19 -#define IRQ_TIMER4 20 -#define IRQ_TIMER5 21 -#define IRQ_TIMER6 22 -#define IRQ_TIMER7 23 -#define IRQ_RTC 24 -#define IRQ_USBHOST 25 -#define IRQ_USBDEVICE 26 -#define IRQ_IEEE1284 27 -#define IRQ_EXT0 28 -#define IRQ_EXT1 29 -#define IRQ_EXT2 30 -#define IRQ_EXT3 31 +#define IRQ_NS9XXX_ETHRX 4 +#define IRQ_NS9XXX_ETHTX 5 +#define IRQ_NS9XXX_ETHPHY 6 +#define IRQ_NS9360_LCD 7 +#define IRQ_NS9360_SERBRX 8 +#define IRQ_NS9360_SERBTX 9 +#define IRQ_NS9360_SERARX 10 +#define IRQ_NS9360_SERATX 11 +#define IRQ_NS9360_SERCRX 12 +#define IRQ_NS9360_SERCTX 13 +#define IRQ_NS9360_I2C 14 +#define IRQ_NS9360_BBUSDMA 15 +#define IRQ_NS9360_TIMER0 16 +#define IRQ_NS9360_TIMER1 17 +#define IRQ_NS9360_TIMER2 18 +#define IRQ_NS9360_TIMER3 19 +#define IRQ_NS9360_TIMER4 20 +#define IRQ_NS9360_TIMER5 21 +#define IRQ_NS9360_TIMER6 22 +#define IRQ_NS9360_TIMER7 23 +#define IRQ_NS9360_RTC 24 +#define IRQ_NS9360_USBHOST 25 +#define IRQ_NS9360_USBDEVICE 26 +#define IRQ_NS9360_IEEE1284 27 +#define IRQ_NS9XXX_EXT0 28 +#define IRQ_NS9XXX_EXT1 29 +#define IRQ_NS9XXX_EXT2 30 +#define IRQ_NS9XXX_EXT3 31 #define BBUS_IRQ(irq) (32 + irq) @@ -67,7 +68,7 @@ /* * these Interrupts are specific for the a9m9750dev board. * They are generated by an FPGA that interrupts the CPU on - * IRQ_EXT2 + * IRQ_NS9360_EXT2 */ #define FPGA_IRQ(irq) (64 + irq) diff --git a/include/asm-arm/arch-ns9xxx/module.h b/include/asm-arm/arch-ns9xxx/module.h new file mode 100644 index 00000000000..ac08a31111e --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/module.h @@ -0,0 +1,60 @@ +/* + * include/asm-arm/arch-ns9xxx/module.h + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_MODULE_H +#define __ASM_ARCH_MODULE_H + +#include <asm/mach-types.h> + +#define module_is_cc7ucamry() (0 \ + || machine_is_cc7ucamry() \ + ) + +#define module_is_cc9c() (0 \ + || machine_is_cc9c() \ + ) + +#define module_is_cc9p9210() (0 \ + || machine_is_cc9p9210() \ + || machine_is_cc9p9210js() \ + ) + +#define module_is_cc9p9215() (0 \ + || machine_is_cc9p9215() \ + || machine_is_cc9p9215js() \ + ) + +#define module_is_cc9p9360() (0 \ + || machine_is_a9m9360() \ + || machine_is_cc9p9360dev() \ + || machine_is_cc9p9360js() \ + || machine_is_cc9p9360val() \ + ) + +#define module_is_cc9p9750() (0 \ + || machine_is_a9m9750() \ + || machine_is_cc9p9750dev() \ + || machine_is_cc9p9750js() \ + || machine_is_cc9p9750val() \ + ) + +#define module_is_ccw9c() (0 \ + || machine_is_ccw9c() \ + ) + +#define module_is_inc20otter() (0 \ + || machine_is_inc20otter() \ + ) + +#define module_is_otter() (0 \ + || machine_is_otter() \ + ) + +#endif /* ifndef __ASM_ARCH_MODULE_H */ diff --git a/include/asm-arm/arch-ns9xxx/processor-ns9360.h b/include/asm-arm/arch-ns9xxx/processor-ns9360.h new file mode 100644 index 00000000000..f3aa6c50dbe --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/processor-ns9360.h @@ -0,0 +1,32 @@ +/* + * include/asm-arm/arch-ns9xxx/processor-ns9360.h + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ +#ifndef __ASM_ARCH_PROCESSORNS9360_H +#define __ASM_ARCH_PROCESSORNS9360_H + +#include <linux/init.h> + +void ns9360_reset(char mode); + +unsigned long ns9360_systemclock(void) __attribute__((const)); + +static inline unsigned long ns9360_cpuclock(void) __attribute__((const)); +static inline unsigned long ns9360_cpuclock(void) +{ + return ns9360_systemclock() / 2; +} + +void __init ns9360_map_io(void); + +extern struct sys_timer ns9360_timer; + +int ns9360_gpio_configure(unsigned gpio, int inv, int func); + +#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */ diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h index 223e51b8e10..f7b53b65de8 100644 --- a/include/asm-arm/arch-ns9xxx/processor.h +++ b/include/asm-arm/arch-ns9xxx/processor.h @@ -1,7 +1,7 @@ /* * include/asm-arm/arch-ns9xxx/processor.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -11,9 +11,32 @@ #ifndef __ASM_ARCH_PROCESSOR_H #define __ASM_ARCH_PROCESSOR_H -#include <asm/mach-types.h> +#include <asm/arch-ns9xxx/module.h> -#define processor_is_ns9360() (machine_is_cc9p9360dev() \ - || machine_is_cc9p9360js()) +#define processor_is_ns9210() (0 \ + || module_is_cc7ucamry() \ + || module_is_cc9p9210() \ + || module_is_inc20otter() \ + || module_is_otter() \ + ) + +#define processor_is_ns9215() (0 \ + || module_is_cc9p9215() \ + ) + +#define processor_is_ns9360() (0 \ + || module_is_cc9p9360() \ + || module_is_cc9c() \ + || module_is_ccw9c() \ + ) + +#define processor_is_ns9750() (0 \ + || module_is_cc9p9750() \ + ) + +#define processor_is_ns921x() (0 \ + || processor_is_ns9210() \ + || processor_is_ns9215() \ + ) #endif /* ifndef __ASM_ARCH_PROCESSOR_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-sys-common.h b/include/asm-arm/arch-ns9xxx/regs-sys-common.h new file mode 100644 index 00000000000..956c57cb781 --- /dev/null +++ b/include/asm-arm/arch-ns9xxx/regs-sys-common.h @@ -0,0 +1,31 @@ +/* + * include/asm-arm/arch-ns9xxx/regs-sys-common.h + * + * Copyright (C) 2007 by Digi International Inc. + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_REGSSYSCOMMON_H +#define __ASM_ARCH_REGSSYSCOMMON_H +#include <asm/hardware.h> + +/* Interrupt Vector Address Register Level x */ +#define SYS_IVA(x) __REG2(0xa09000c4, (x)) + +/* Interrupt Configuration registers */ +#define SYS_IC(x) __REG2(0xa0900144, (x)) + +/* ISRADDR */ +#define SYS_ISRADDR __REG(0xa0900164) + +/* Interrupt Status Active */ +#define SYS_ISA __REG(0xa0900168) + +/* Interrupt Status Raw */ +#define SYS_ISR __REG(0xa090016c) + +#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */ diff --git a/include/asm-arm/arch-ns9xxx/regs-sys.h b/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h index 749262f8620..318b6945afb 100644 --- a/include/asm-arm/arch-ns9xxx/regs-sys.h +++ b/include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h @@ -1,15 +1,15 @@ /* - * include/asm-arm/arch-ns9xxx/regs-sys.h + * include/asm-arm/arch-ns9xxx/regs-sys-ns9360.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ -#ifndef __ASM_ARCH_REGSSYS_H -#define __ASM_ARCH_REGSSYS_H +#ifndef __ASM_ARCH_REGSSYSNS9360_H +#define __ASM_ARCH_REGSSYSNS9360_H #include <asm/hardware.h> @@ -27,21 +27,6 @@ /* Timer x Read register */ #define SYS_TR(x) __REG2(0xa0900084, (x)) -/* Interrupt Vector Address Register Level x */ -#define SYS_IVA(x) __REG2(0xa09000c4, (x)) - -/* Interrupt Configuration registers */ -#define SYS_IC(x) __REG2(0xa0900144, (x)) - -/* ISRADDR */ -#define SYS_ISRADDR __REG(0xa0900164) - -/* Interrupt Status Active */ -#define SYS_ISA __REG(0xa0900168) - -/* Interrupt Status Raw */ -#define SYS_ISR __REG(0xa090016c) - /* Timer Interrupt Status register */ #define SYS_TIS __REG(0xa0900170) @@ -160,4 +145,4 @@ #define SYS_EIC_LVEDG_LEVEL __REGVAL(SYS_EIC_LVEDG, 0) #define SYS_EIC_LVEDG_EDGE __REGVAL(SYS_EIC_LVEDG, 1) -#endif /* ifndef __ASM_ARCH_REGSSYS_H */ +#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */ diff --git a/include/asm-arm/arch-ns9xxx/system.h b/include/asm-arm/arch-ns9xxx/system.h index c1082bd8977..1348073afe4 100644 --- a/include/asm-arm/arch-ns9xxx/system.h +++ b/include/asm-arm/arch-ns9xxx/system.h @@ -1,7 +1,7 @@ /* * include/asm-arm/arch-ns9xxx/system.h * - * Copyright (C) 2006 by Digi International Inc. + * Copyright (C) 2006,2007 by Digi International Inc. * All rights reserved. * * This program is free software; you can redistribute it and/or modify it @@ -12,8 +12,8 @@ #define __ASM_ARCH_SYSTEM_H #include <asm/proc-fns.h> -#include <asm/arch-ns9xxx/regs-sys.h> -#include <asm/mach-types.h> +#include <asm/arch-ns9xxx/processor.h> +#include <asm/arch-ns9xxx/processor-ns9360.h> static inline void arch_idle(void) { @@ -22,11 +22,12 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { - u32 reg; - - reg = __raw_readl(SYS_PLL) >> 16; - REGSET(reg, SYS_PLL, SWC, YES); - __raw_writel(reg, SYS_PLL); +#ifdef CONFIG_PROCESSOR_NS9360 + if (processor_is_ns9360()) + ns9360_reset(mode); + else +#endif + BUG(); BUG(); } diff --git a/include/asm-arm/arch-ns9xxx/uncompress.h b/include/asm-arm/arch-ns9xxx/uncompress.h index 961ca7dc995..71066baceab 100644 --- a/include/asm-arm/arch-ns9xxx/uncompress.h +++ b/include/asm-arm/arch-ns9xxx/uncompress.h @@ -11,20 +11,149 @@ #ifndef __ASM_ARCH_UNCOMPRESS_H #define __ASM_ARCH_UNCOMPRESS_H -static void putc(char c) +#include <asm/io.h> + +#define __REG(x) ((void __iomem __force *)(x)) + +static void putc_dummy(char c, void __iomem *base) { - volatile u8 *base = (volatile u8 *)0x40000000; - int t = 0x10000; + /* nothing */ +} +static void putc_ns9360(char c, void __iomem *base) +{ + static int t = 0x10000; + do { + if (t) + --t; + + if (__raw_readl(base + 8) & (1 << 3)) { + __raw_writeb(c, base + 16); + t = 0x10000; + break; + } + } while (t); +} + +static void putc_a9m9750dev(char c, void __iomem *base) +{ + static int t = 0x10000; + do { + if (t) + --t; + + if (__raw_readb(base + 5) & (1 << 5)) { + __raw_writeb(c, base); + t = 0x10000; + break; + } + } while (t); + +} + +static void putc_ns921x(char c, void __iomem *base) +{ + static int t = 0x10000; do { - if (base[5] & 0x20) { - base[0] = c; + if (t) + --t; + + if (!(__raw_readl(base) & (1 << 11))) { + __raw_writeb(c, base + 0x0028); + t = 0x10000; break; } - } while (--t); + } while (t); } -#define arch_decomp_setup() +#define MSCS __REG(0xA0900184) + +#define NS9360_UARTA __REG(0x90200040) +#define NS9360_UARTB __REG(0x90200000) +#define NS9360_UARTC __REG(0x90300000) +#define NS9360_UARTD __REG(0x90300040) + +#define NS9360_UART_ENABLED(base) \ + (__raw_readl(NS9360_UARTA) & (1 << 31)) + +#define A9M9750DEV_UARTA __REG(0x40000000) + +#define NS921XSYS_CLOCK __REG(0xa090017c) +#define NS921X_UARTA __REG(0x90010000) +#define NS921X_UARTB __REG(0x90018000) +#define NS921X_UARTC __REG(0x90020000) +#define NS921X_UARTD __REG(0x90028000) + +#define NS921X_UART_ENABLED(base) \ + (__raw_readl((base) + 0x1000) & (1 << 29)) + +static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base) +{ + if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) { + /* ns9360 or ns9750 */ + if (NS9360_UART_ENABLED(NS9360_UARTA)) { + *putc = putc_ns9360; + *base = NS9360_UARTA; + return; + } else if (NS9360_UART_ENABLED(NS9360_UARTB)) { + *putc = putc_ns9360; + *base = NS9360_UARTB; + return; + } else if (NS9360_UART_ENABLED(NS9360_UARTC)) { + *putc = putc_ns9360; + *base = NS9360_UARTC; + return; + } else if (NS9360_UART_ENABLED(NS9360_UARTD)) { + *putc = putc_ns9360; + *base = NS9360_UARTD; + return; + } else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) { + *putc = putc_a9m9750dev; + *base = A9M9750DEV_UARTA; + return; + } + } else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) { + /* ns921x */ + u32 clock = __raw_readl(NS921XSYS_CLOCK); + + if ((clock & (1 << 1)) && + NS921X_UART_ENABLED(NS921X_UARTA)) { + *putc = putc_ns921x; + *base = NS921X_UARTA; + return; + } else if ((clock & (1 << 2)) && + NS921X_UART_ENABLED(NS921X_UARTB)) { + *putc = putc_ns921x; + *base = NS921X_UARTB; + return; + } else if ((clock & (1 << 3)) && + NS921X_UART_ENABLED(NS921X_UARTC)) { + *putc = putc_ns921x; + *base = NS921X_UARTC; + return; + } else if ((clock & (1 << 4)) && + NS921X_UART_ENABLED(NS921X_UARTD)) { + *putc = putc_ns921x; + *base = NS921X_UARTD; + return; + } + } + + *putc = putc_dummy; +} + +void (*myputc)(char, void __iomem *); +void __iomem *base; + +static void putc(char c) +{ + myputc(c, base); +} + +static void arch_decomp_setup(void) +{ + autodetect(&myputc, &base); +} #define arch_decomp_wdog() static void flush(void) diff --git a/include/asm-arm/arch-omap/board-osk.h b/include/asm-arm/arch-omap/board-osk.h index 2b1a8a4fe44..94926090e47 100644 --- a/include/asm-arm/arch-omap/board-osk.h +++ b/include/asm-arm/arch-omap/board-osk.h @@ -32,5 +32,16 @@ /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */ #define OMAP_OSK_ETHR_START 0x04800300 +/* TPS65010 has four GPIOs. nPG and LED2 can be treated like GPIOs with + * alternate pin configurations for hardware-controlled blinking. + */ +#define OSK_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) +# define OSK_TPS_GPIO_USB_PWR_EN (OSK_TPS_GPIO_BASE + 0) +# define OSK_TPS_GPIO_LED_D3 (OSK_TPS_GPIO_BASE + 1) +# define OSK_TPS_GPIO_LAN_RESET (OSK_TPS_GPIO_BASE + 2) +# define OSK_TPS_GPIO_DSP_PWR_EN (OSK_TPS_GPIO_BASE + 3) +# define OSK_TPS_GPIO_LED_D9 (OSK_TPS_GPIO_BASE + 4) +# define OSK_TPS_GPIO_LED_D2 (OSK_TPS_GPIO_BASE + 5) + #endif /* __ASM_ARCH_OMAP_OSK_H */ diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h index fa688104990..57523bdb642 100644 --- a/include/asm-arm/arch-omap/clock.h +++ b/include/asm-arm/arch-omap/clock.h @@ -14,6 +14,35 @@ #define __ARCH_ARM_OMAP_CLOCK_H struct module; +struct clk; + +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + +struct clksel_rate { + u8 div; + u32 val; + u8 flags; +}; + +struct clksel { + struct clk *parent; + const struct clksel_rate *rates; +}; + +struct dpll_data { + void __iomem *mult_div1_reg; + u32 mult_mask; + u32 div1_mask; +# if defined(CONFIG_ARCH_OMAP3) + void __iomem *control_reg; + u32 enable_mask; + u8 auto_recal_bit; + u8 recal_en_bit; + u8 recal_st_bit; +# endif +}; + +#endif struct clk { struct list_head node; @@ -25,8 +54,6 @@ struct clk { __u32 flags; void __iomem *enable_reg; __u8 enable_bit; - __u8 rate_offset; - __u8 src_offset; __s8 usecount; void (*recalc)(struct clk *); int (*set_rate)(struct clk *, unsigned long); @@ -34,6 +61,16 @@ struct clk { void (*init)(struct clk *); int (*enable)(struct clk *); void (*disable)(struct clk *); +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + u8 fixed_div; + void __iomem *clksel_reg; + u32 clksel_mask; + const struct clksel *clksel; + const struct dpll_data *dpll_data; +#else + __u8 rate_offset; + __u8 src_offset; +#endif }; struct clk_functions { @@ -54,10 +91,12 @@ extern int clk_init(struct clk_functions * custom_clocks); extern int clk_register(struct clk *clk); extern void clk_unregister(struct clk *clk); extern void propagate_rate(struct clk *clk); +extern void recalculate_root_clocks(void); extern void followparent_recalc(struct clk * clk); extern void clk_allow_idle(struct clk *clk); extern void clk_deny_idle(struct clk *clk); extern int clk_get_usecount(struct clk *clk); +extern void clk_enable_init_clocks(void); /* Clock flags */ #define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */ @@ -71,21 +110,33 @@ extern int clk_get_usecount(struct clk *clk); #define CLOCK_NO_IDLE_PARENT (1 << 8) #define DELAYED_APP (1 << 9) /* Delay application of clock */ #define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ -#define CM_MPU_SEL1 (1 << 11) /* Domain divider/source */ -#define CM_DSP_SEL1 (1 << 12) -#define CM_GFX_SEL1 (1 << 13) -#define CM_MODEM_SEL1 (1 << 14) -#define CM_CORE_SEL1 (1 << 15) /* Sets divider for many */ -#define CM_CORE_SEL2 (1 << 16) /* sets parent for GPT */ -#define CM_WKUP_SEL1 (1 << 17) -#define CM_PLL_SEL1 (1 << 18) -#define CM_PLL_SEL2 (1 << 19) -#define CM_SYSCLKOUT_SEL1 (1 << 20) +#define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */ +/* bits 13-20 are currently free */ #define CLOCK_IN_OMAP310 (1 << 21) #define CLOCK_IN_OMAP730 (1 << 22) #define CLOCK_IN_OMAP1510 (1 << 23) #define CLOCK_IN_OMAP16XX (1 << 24) #define CLOCK_IN_OMAP242X (1 << 25) #define CLOCK_IN_OMAP243X (1 << 26) +#define CLOCK_IN_OMAP343X (1 << 27) /* clocks common to all 343X */ +#define PARENT_CONTROLS_CLOCK (1 << 28) +#define CLOCK_IN_OMAP3430ES1 (1 << 29) /* 3430ES1 clocks only */ +#define CLOCK_IN_OMAP3430ES2 (1 << 30) /* 3430ES2 clocks only */ + +/* Clksel_rate flags */ +#define DEFAULT_RATE (1 << 0) +#define RATE_IN_242X (1 << 1) +#define RATE_IN_243X (1 << 2) +#define RATE_IN_343X (1 << 3) /* rates common to all 343X */ +#define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */ + +#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) + + +/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */ +#define CORE_CLK_SRC_32K 0 +#define CORE_CLK_SRC_DPLL 1 +#define CORE_CLK_SRC_DPLL_X2 2 #endif diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h new file mode 100644 index 00000000000..9944bb5d533 --- /dev/null +++ b/include/asm-arm/arch-omap/control.h @@ -0,0 +1,191 @@ +#ifndef __ASM_ARCH_CONTROL_H +#define __ASM_ARCH_CONTROL_H + +/* + * include/asm-arm/arch-omap/control.h + * + * OMAP2/3 System Control Module definitions + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#include <asm/arch/io.h> + +#define OMAP242X_CTRL_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +#define OMAP243X_CTRL_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +#define OMAP343X_CTRL_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) + +/* + * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for + * OMAP24XX and OMAP34XX. + */ + +/* Control submodule offsets */ + +#define OMAP2_CONTROL_INTERFACE 0x000 +#define OMAP2_CONTROL_PADCONFS 0x030 +#define OMAP2_CONTROL_GENERAL 0x270 +#define OMAP343X_CONTROL_MEM_WKUP 0x600 +#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00 +#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60 + +/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */ + +#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10) + +/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */ +#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004) +#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020) +#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024) +#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028) +#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c) +#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030) +#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034) +#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040) +#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090) +#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094) +#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098) +#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c) + +/* 242x-only CONTROL_GENERAL register offsets */ +#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */ +#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068) + +/* 243x-only CONTROL_GENERAL register offsets */ +/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */ +#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078) +#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c) +#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) +#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) +#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198) + +/* 24xx-only CONTROL_GENERAL register offsets */ +#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000) +#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008) +#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044) +#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048) +#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c) +#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050) +#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060) +#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064) +#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c) +#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070) +#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074 +#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) +#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) +#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088) +#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c) +#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0) +#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4) +#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8) +#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac) +#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0) +#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4) +#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0) +#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4) +#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8) +#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc) +#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0) +#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4) +#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8) +#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc) +#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0) +#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4) + +/* 34xx-only CONTROL_GENERAL register offsets */ +#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000) +#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008) +#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c) +#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068) +#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c) +#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070) +#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074) +#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078) +#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) +#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) +#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0) +#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8) +#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac) +#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0) +#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4) +#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8) +#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc) +#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0) +#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4) +#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8) +#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc) +#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0) +#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4) +#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8) +#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec) +#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0) +#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4) +#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8) +#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) +#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) +#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) + +/* + * REVISIT: This list of registers is not comprehensive - there are more + * that should be added. + */ + +/* + * Control module register bit defines - these should eventually go into + * their own regbits file. Some of these will be complicated, depending + * on the device type (general-purpose, emulator, test, secure, bad, other) + * and the security mode (secure, non-secure, don't care) + */ +/* CONTROL_DEVCONF0 bits */ +#define OMAP24XX_USBSTANDBYCTRL (1 << 15) +#define OMAP2_MCBSP2_CLKS_MASK (1 << 6) +#define OMAP2_MCBSP1_CLKS_MASK (1 << 2) + +/* CONTROL_DEVCONF1 bits */ +#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */ +#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */ +#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */ + +/* CONTROL_STATUS bits */ +#define OMAP2_DEVICETYPE_MASK (0x7 << 8) +#define OMAP2_SYSBOOT_5_MASK (1 << 5) +#define OMAP2_SYSBOOT_4_MASK (1 << 4) +#define OMAP2_SYSBOOT_3_MASK (1 << 3) +#define OMAP2_SYSBOOT_2_MASK (1 << 2) +#define OMAP2_SYSBOOT_1_MASK (1 << 1) +#define OMAP2_SYSBOOT_0_MASK (1 << 0) + +#ifndef __ASSEMBLY__ +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +extern void omap_ctrl_base_set(u32 base); +extern u32 omap_ctrl_base_get(void); +extern u8 omap_ctrl_readb(u16 offset); +extern u16 omap_ctrl_readw(u16 offset); +extern u32 omap_ctrl_readl(u16 offset); +extern void omap_ctrl_writeb(u8 val, u16 offset); +extern void omap_ctrl_writew(u16 val, u16 offset); +extern void omap_ctrl_writel(u32 val, u16 offset); +#else +#define omap_ctrl_base_set(x) WARN_ON(1) +#define omap_ctrl_base_get() 0 +#define omap_ctrl_readb(x) 0 +#define omap_ctrl_readw(x) 0 +#define omap_ctrl_readl(x) 0 +#define omap_ctrl_writeb(x, y) WARN_ON(1) +#define omap_ctrl_writew(x, y) WARN_ON(1) +#define omap_ctrl_writel(x, y) WARN_ON(1) +#endif +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ARCH_CONTROL_H */ + diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S index f6967c8df32..74cd57221c8 100644 --- a/include/asm-arm/arch-omap/entry-macro.S +++ b/include/asm-arm/arch-omap/entry-macro.S @@ -68,7 +68,7 @@ .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =VA_IC_BASE + ldr \base, =OMAP2_VA_IC_BASE ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */ cmp \irqnr, #0x0 bne 2222f diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h index 164da09be09..86621a04cd8 100644 --- a/include/asm-arm/arch-omap/gpio.h +++ b/include/asm-arm/arch-omap/gpio.h @@ -82,62 +82,35 @@ extern void omap_set_gpio_debounce_time(int gpio, int enable); /*-------------------------------------------------------------------------*/ -/* wrappers for "new style" GPIO calls. the old OMAP-specfic ones should - * eventually be removed (along with this errno.h inclusion), and maybe - * gpios should put MPUIOs last too. +/* Wrappers for "new style" GPIO calls, using the new infrastructure + * which lets us plug in FPGA, I2C, and other implementations. + * * + * The original OMAP-specfic calls should eventually be removed. */ -#include <asm/errno.h> - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return omap_request_gpio(gpio); -} - -static inline void gpio_free(unsigned gpio) -{ - omap_free_gpio(gpio); -} - -static inline int __gpio_set_direction(unsigned gpio, int is_input) -{ - if (cpu_class_is_omap2()) { - if (gpio > OMAP_MAX_GPIO_LINES) - return -EINVAL; - } else { - if (gpio > (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)) - return -EINVAL; - } - omap_set_gpio_direction(gpio, is_input); - return 0; -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return __gpio_set_direction(gpio, 1); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - omap_set_gpio_dataout(gpio, value); - return __gpio_set_direction(gpio, 0); -} +#include <linux/errno.h> +#include <asm-generic/gpio.h> static inline int gpio_get_value(unsigned gpio) { - return omap_get_gpio_datain(gpio); + return __gpio_get_value(gpio); } static inline void gpio_set_value(unsigned gpio, int value) { - omap_set_gpio_dataout(gpio, value); + __gpio_set_value(gpio, value); } -#include <asm-generic/gpio.h> /* cansleep wrappers */ +static inline int gpio_cansleep(unsigned gpio) +{ + return __gpio_cansleep(gpio); +} static inline int gpio_to_irq(unsigned gpio) { - return OMAP_GPIO_IRQ(gpio); + if (gpio < (OMAP_MAX_GPIO_LINES + 16)) + return OMAP_GPIO_IRQ(gpio); + return -EINVAL; } static inline int irq_to_gpio(unsigned irq) diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h index 289082d07f1..160578e1f55 100644 --- a/include/asm-arm/arch-omap/io.h +++ b/include/asm-arm/arch-omap/io.h @@ -80,6 +80,13 @@ #define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE /* 0x49000000 */ #define OMAP243X_GPMC_VIRT 0xFE000000 #define OMAP243X_GPMC_SIZE SZ_1M +#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE +#define OMAP243X_SDRC_VIRT 0xFD000000 +#define OMAP243X_SDRC_SIZE SZ_1M +#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE +#define OMAP243X_SMS_VIRT 0xFC000000 +#define OMAP243X_SMS_SIZE SZ_1M + #endif #define IO_OFFSET 0x90000000 @@ -88,16 +95,73 @@ #define io_v2p(va) ((va) - IO_OFFSET) /* Works for L3 and L4 */ /* DSP */ -#define DSP_MEM_24XX_PHYS OMAP24XX_DSP_MEM_BASE /* 0x58000000 */ +#define DSP_MEM_24XX_PHYS OMAP2420_DSP_MEM_BASE /* 0x58000000 */ #define DSP_MEM_24XX_VIRT 0xe0000000 #define DSP_MEM_24XX_SIZE 0x28000 -#define DSP_IPI_24XX_PHYS OMAP24XX_DSP_IPI_BASE /* 0x59000000 */ +#define DSP_IPI_24XX_PHYS OMAP2420_DSP_IPI_BASE /* 0x59000000 */ #define DSP_IPI_24XX_VIRT 0xe1000000 #define DSP_IPI_24XX_SIZE SZ_4K -#define DSP_MMU_24XX_PHYS OMAP24XX_DSP_MMU_BASE /* 0x5a000000 */ +#define DSP_MMU_24XX_PHYS OMAP2420_DSP_MMU_BASE /* 0x5a000000 */ #define DSP_MMU_24XX_VIRT 0xe2000000 #define DSP_MMU_24XX_SIZE SZ_4K +#elif defined(CONFIG_ARCH_OMAP3) + +/* We map both L3 and L4 on OMAP3 */ +#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */ +#define L3_34XX_VIRT 0xf8000000 +#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ + +#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */ +#define L4_34XX_VIRT 0xd8000000 +#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ + +/* + * Need to look at the Size 4M for L4. + * VPOM3430 was not working for Int controller + */ + +#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */ +#define L4_WK_34XX_VIRT 0xd8300000 +#define L4_WK_34XX_SIZE SZ_1M + +#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */ +#define L4_PER_34XX_VIRT 0xd9000000 +#define L4_PER_34XX_SIZE SZ_1M + +#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE /* 0x54000000 */ +#define L4_EMU_34XX_VIRT 0xe4000000 +#define L4_EMU_34XX_SIZE SZ_64M + +#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */ +#define OMAP34XX_GPMC_VIRT 0xFE000000 +#define OMAP34XX_GPMC_SIZE SZ_1M + +#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */ +#define OMAP343X_SMS_VIRT 0xFC000000 +#define OMAP343X_SMS_SIZE SZ_1M + +#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */ +#define OMAP343X_SDRC_VIRT 0xFD000000 +#define OMAP343X_SDRC_SIZE SZ_1M + + +#define IO_OFFSET 0x90000000 +#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */ +#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */ + +/* DSP */ +#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */ +#define DSP_MEM_34XX_VIRT 0xe0000000 +#define DSP_MEM_34XX_SIZE 0x28000 +#define DSP_IPI_34XX_PHYS OMAP34XX_DSP_IPI_BASE /* 0x59000000 */ +#define DSP_IPI_34XX_VIRT 0xe1000000 +#define DSP_IPI_34XX_SIZE SZ_4K +#define DSP_MMU_34XX_PHYS OMAP34XX_DSP_MMU_BASE /* 0x5a000000 */ +#define DSP_MMU_34XX_VIRT 0xe2000000 +#define DSP_MMU_34XX_SIZE SZ_4K + #endif #ifndef __ASSEMBLER__ diff --git a/include/asm-arm/arch-omap/mmc.h b/include/asm-arm/arch-omap/mmc.h index b70e37b6124..c9588f49eb5 100644 --- a/include/asm-arm/arch-omap/mmc.h +++ b/include/asm-arm/arch-omap/mmc.h @@ -18,6 +18,8 @@ #define OMAP_MMC_MAX_SLOTS 2 struct omap_mmc_platform_data { + struct omap_mmc_conf conf; + unsigned enabled:1; /* number of slots on board */ unsigned nr_slots:2; diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h index b8fff50e6a8..ff9a5b5575f 100644 --- a/include/asm-arm/arch-omap/mux.h +++ b/include/asm-arm/arch-omap/mux.h @@ -4,9 +4,10 @@ * Table of the Omap register configurations for the FUNC_MUX and * PULL_DWN combinations. * - * Copyright (C) 2003 - 2005 Nokia Corporation + * Copyright (C) 2004 - 2008 Texas Instruments Inc. + * Copyright (C) 2003 - 2008 Nokia Corporation * - * Written by Tony Lindgren <tony.lindgren@nokia.com> + * Written by Tony Lindgren * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -27,14 +28,6 @@ * - W8 = ball * - 1610 = 1510 or 1610, none if common for both 1510 and 1610 * - MMC2_DAT0 = function - * - * Change log: - * Added entry for the I2C interface. (02Feb 2004) - * Copyright (C) 2004 Texas Instruments - * - * Added entry for the keypad and uwire CS1. (09Mar 2004) - * Copyright (C) 2004 Texas Instruments - * */ #ifndef __ASM_ARCH_MUX_H @@ -469,7 +462,12 @@ enum omap24xx_index { AA8_242X_GPIO58, Y20_24XX_GPIO60, W4__24XX_GPIO74, + N15_24XX_GPIO85, M15_24XX_GPIO92, + P20_24XX_GPIO93, + P18_24XX_GPIO95, + M18_24XX_GPIO96, + L14_24XX_GPIO97, J15_24XX_GPIO99, V14_24XX_GPIO117, P14_24XX_GPIO125, @@ -494,8 +492,6 @@ enum omap24xx_index { D3_242X_DMAREQ4, E3_242X_DMAREQ5, - P20_24XX_TSC_IRQ, - /* UART3 */ K15_24XX_UART3_TX, K14_24XX_UART3_RX, @@ -557,13 +553,57 @@ enum omap24xx_index { B3__24XX_KBR5, AA4_24XX_KBC2, B13_24XX_KBC6, + + /* 2430 USB */ + AD9_2430_USB0_PUEN, + Y11_2430_USB0_VP, + AD7_2430_USB0_VM, + AE7_2430_USB0_RCV, + AD4_2430_USB0_TXEN, + AF9_2430_USB0_SE0, + AE6_2430_USB0_DAT, + AD24_2430_USB1_SE0, + AB24_2430_USB1_RCV, + Y25_2430_USB1_TXEN, + AA26_2430_USB1_DAT, + + /* 2430 HS-USB */ + AD9_2430_USB0HS_DATA3, + Y11_2430_USB0HS_DATA4, + AD7_2430_USB0HS_DATA5, + AE7_2430_USB0HS_DATA6, + AD4_2430_USB0HS_DATA2, + AF9_2430_USB0HS_DATA0, + AE6_2430_USB0HS_DATA1, + AE8_2430_USB0HS_CLK, + AD8_2430_USB0HS_DIR, + AE5_2430_USB0HS_STP, + AE9_2430_USB0HS_NXT, + AC7_2430_USB0HS_DATA7, + + /* 2430 McBSP */ + AC10_2430_MCBSP2_FSX, + AD16_2430_MCBSP2_CLX, + AE13_2430_MCBSP2_DX, + AD13_2430_MCBSP2_DR, + AC10_2430_MCBSP2_FSX_OFF, + AD16_2430_MCBSP2_CLX_OFF, + AE13_2430_MCBSP2_DX_OFF, + AD13_2430_MCBSP2_DR_OFF, + +}; + +struct omap_mux_cfg { + struct pin_config *pins; + unsigned long size; + int (*cfg_reg)(const struct pin_config *cfg); }; #ifdef CONFIG_OMAP_MUX /* setup pin muxing in Linux */ extern int omap1_mux_init(void); extern int omap2_mux_init(void); -extern int omap_mux_register(struct pin_config * pins, unsigned long size); +extern int omap_mux_register(struct omap_mux_cfg *); extern int omap_cfg_reg(unsigned long reg_cfg); #else /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ diff --git a/include/asm-arm/arch-omap/omap24xx.h b/include/asm-arm/arch-omap/omap24xx.h index 14c0f949657..b9fcaae287c 100644 --- a/include/asm-arm/arch-omap/omap24xx.h +++ b/include/asm-arm/arch-omap/omap24xx.h @@ -1,3 +1,28 @@ +/* + * include/asm-arm/arch-omap/omap24xx.h + * + * This file contains the processor specific definitions + * of the TI OMAP24XX. + * + * Copyright (C) 2007 Texas Instruments. + * Copyright (C) 2007 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + #ifndef __ASM_ARCH_OMAP24XX_H #define __ASM_ARCH_OMAP24XX_H @@ -13,33 +38,70 @@ /* interrupt controller */ #define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) -#define VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) #define OMAP24XX_IVA_INTC_BASE 0x40000000 #define IRQ_SIR_IRQ 0x0040 -#ifdef CONFIG_ARCH_OMAP2420 -#define OMAP24XX_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) -#define OMAP24XX_PRCM_BASE (L4_24XX_BASE + 0x8000) -#define OMAP24XX_SDRC_BASE (L3_24XX_BASE + 0x9000) -#define OMAP242X_CONTROL_STATUS (L4_24XX_BASE + 0x2f8) -#endif +#define OMAP2420_CTRL_BASE L4_24XX_BASE +#define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) +#define OMAP2420_PRCM_BASE (L4_24XX_BASE + 0x8000) +#define OMAP2420_CM_BASE (L4_24XX_BASE + 0x8000) +#define OMAP2420_PRM_BASE OMAP2420_CM_BASE +#define OMAP2420_SDRC_BASE (L3_24XX_BASE + 0x9000) +#define OMAP2420_SMS_BASE 0x68008000 -#ifdef CONFIG_ARCH_OMAP2430 -#define OMAP24XX_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000) -#define OMAP24XX_PRCM_BASE (L4_WK_243X_BASE + 0x6000) -#define OMAP24XX_SDRC_BASE (0x6D000000) -#define OMAP242X_CONTROL_STATUS (L4_24XX_BASE + 0x2f8) +#define OMAP2430_32KSYNCT_BASE (L4_WK_243X_BASE + 0x20000) +#define OMAP2430_PRCM_BASE (L4_WK_243X_BASE + 0x6000) +#define OMAP2430_CM_BASE (L4_WK_243X_BASE + 0x6000) +#define OMAP2430_PRM_BASE OMAP2430_CM_BASE + +#define OMAP243X_SMS_BASE 0x6C000000 +#define OMAP243X_SDRC_BASE 0x6D000000 #define OMAP243X_GPMC_BASE 0x6E000000 -#endif +#define OMAP243X_SCM_BASE (L4_WK_243X_BASE + 0x2000) +#define OMAP243X_CTRL_BASE OMAP243X_SCM_BASE +#define OMAP243X_HS_BASE (L4_24XX_BASE + 0x000ac000) /* DSP SS */ -#define OMAP24XX_DSP_BASE 0x58000000 -#define OMAP24XX_DSP_MEM_BASE (OMAP24XX_DSP_BASE + 0x0) -#define OMAP24XX_DSP_IPI_BASE (OMAP24XX_DSP_BASE + 0x1000000) -#define OMAP24XX_DSP_MMU_BASE (OMAP24XX_DSP_BASE + 0x2000000) +#define OMAP2420_DSP_BASE 0x58000000 +#define OMAP2420_DSP_MEM_BASE (OMAP2420_DSP_BASE + 0x0) +#define OMAP2420_DSP_IPI_BASE (OMAP2420_DSP_BASE + 0x1000000) +#define OMAP2420_DSP_MMU_BASE (OMAP2420_DSP_BASE + 0x2000000) + +#define OMAP243X_DSP_BASE 0x5C000000 +#define OMAP243X_DSP_MEM_BASE (OMAP243X_DSP_BASE + 0x0) +#define OMAP243X_DSP_MMU_BASE (OMAP243X_DSP_BASE + 0x1000000) /* Mailbox */ #define OMAP24XX_MAILBOX_BASE (L4_24XX_BASE + 0x94000) +/* Camera */ +#define OMAP24XX_CAMERA_BASE (L4_24XX_BASE + 0x52000) + +/* Security */ +#define OMAP24XX_SEC_BASE (L4_24XX_BASE + 0xA0000) +#define OMAP24XX_SEC_RNG_BASE (OMAP24XX_SEC_BASE + 0x0000) +#define OMAP24XX_SEC_DES_BASE (OMAP24XX_SEC_BASE + 0x2000) +#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000) +#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000) +#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000) + +#if defined(CONFIG_ARCH_OMAP2420) + +#define OMAP2_32KSYNCT_BASE OMAP2420_32KSYNCT_BASE +#define OMAP2_PRCM_BASE OMAP2420_PRCM_BASE +#define OMAP2_CM_BASE OMAP2420_CM_BASE +#define OMAP2_PRM_BASE OMAP2420_PRM_BASE +#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) + +#elif defined(CONFIG_ARCH_OMAP2430) + +#define OMAP2_32KSYNCT_BASE OMAP2430_32KSYNCT_BASE +#define OMAP2_PRCM_BASE OMAP2430_PRCM_BASE +#define OMAP2_CM_BASE OMAP2430_CM_BASE +#define OMAP2_PRM_BASE OMAP2430_PRM_BASE +#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE) + +#endif + #endif /* __ASM_ARCH_OMAP24XX_H */ diff --git a/include/asm-arm/arch-omap/sdrc.h b/include/asm-arm/arch-omap/sdrc.h new file mode 100644 index 00000000000..673b3965bef --- /dev/null +++ b/include/asm-arm/arch-omap/sdrc.h @@ -0,0 +1,75 @@ +#ifndef ____ASM_ARCH_SDRC_H +#define ____ASM_ARCH_SDRC_H + +/* + * OMAP2/3 SDRC/SMS register definitions + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/arch/io.h> + +/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ + +#define SDRC_SYSCONFIG 0x010 +#define SDRC_DLLA_CTRL 0x060 +#define SDRC_DLLA_STATUS 0x064 +#define SDRC_DLLB_CTRL 0x068 +#define SDRC_DLLB_STATUS 0x06C +#define SDRC_POWER 0x070 +#define SDRC_MR_0 0x084 +#define SDRC_RFR_CTRL_0 0x0a4 + +/* + * These values represent the number of memory clock cycles between + * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 + * rows per device, and include a subtraction of a 50 cycle window in the + * event that the autorefresh command is delayed due to other SDRC activity. + * The '| 1' sets the ARE field to send one autorefresh when the autorefresh + * counter reaches 0. + * + * These represent optimal values for common parts, it won't work for all. + * As long as you scale down, most parameters are still work, they just + * become sub-optimal. The RFR value goes in the opposite direction. If you + * don't adjust it down as your clock period increases the refresh interval + * will not be met. Setting all parameters for complete worst case may work, + * but may cut memory performance by 2x. Due to errata the DLLs need to be + * unlocked and their value needs run time calibration. A dynamic call is + * need for that as no single right value exists acorss production samples. + * + * Only the FULL speed values are given. Current code is such that rate + * changes must be made at DPLLoutx2. The actual value adjustment for low + * frequency operation will be handled by omap_set_performance() + * + * By having the boot loader boot up in the fastest L4 speed available likely + * will result in something which you can switch between. + */ +#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) +#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) +#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) +#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ +#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ + + +/* + * SMS register access + */ + + +#define OMAP242X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg) +#define OMAP243X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg) +#define OMAP343X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg) + +/* SMS register offsets - read/write with sms_{read,write}_reg() */ + +#define SMS_SYSCONFIG 0x010 +/* REVISIT: fill in other SMS registers here */ + +#endif diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h index 99ae9eabaf7..2147d18aaea 100644 --- a/include/asm-arm/arch-omap/usb.h +++ b/include/asm-arm/arch-omap/usb.h @@ -132,14 +132,11 @@ # define CONF_USB_PWRDN_DP_R (1 << 1) /* OMAP2 */ -#define CONTROL_DEVCONF_REG __REG32(L4_24XX_BASE + 0x0274) # define USB_UNIDIR 0x0 # define USB_UNIDIR_TLL 0x1 # define USB_BIDIR 0x2 # define USB_BIDIR_TLL 0x3 -# define USBT0WRMODEI(x) ((x) << 22) -# define USBT1WRMODEI(x) ((x) << 20) -# define USBT2WRMODEI(x) ((x) << 18) +# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2))) # define USBT2TLL5PI (1 << 17) # define USB0PUENACTLOI (1 << 16) # define USBSTANDBYCTRL (1 << 15) diff --git a/include/asm-arm/arch-orion/io.h b/include/asm-arm/arch-orion/io.h deleted file mode 100644 index e0b8c39b916..00000000000 --- a/include/asm-arm/arch-orion/io.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * include/asm-arm/arch-orion/io.h - * - * Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include "orion.h" - -#define IO_SPACE_LIMIT 0xffffffff -#define IO_SPACE_REMAP ORION_PCI_SYS_IO_BASE - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)addr; -} - -#define __io(a) __io(a) -#define __mem_pci(a) (a) - -#endif diff --git a/include/asm-arm/arch-orion/irqs.h b/include/asm-arm/arch-orion/irqs.h deleted file mode 100644 index eea65ca6076..00000000000 --- a/include/asm-arm/arch-orion/irqs.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * include/asm-arm/arch-orion/irqs.h - * - * IRQ definitions for Orion SoC - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IRQS_H__ -#define __ASM_ARCH_IRQS_H__ - -#include "orion.h" /* need GPIO_MAX */ - -/* - * Orion Main Interrupt Controller - */ -#define IRQ_ORION_BRIDGE 0 -#define IRQ_ORION_DOORBELL_H2C 1 -#define IRQ_ORION_DOORBELL_C2H 2 -#define IRQ_ORION_UART0 3 -#define IRQ_ORION_UART1 4 -#define IRQ_ORION_I2C 5 -#define IRQ_ORION_GPIO_0_7 6 -#define IRQ_ORION_GPIO_8_15 7 -#define IRQ_ORION_GPIO_16_23 8 -#define IRQ_ORION_GPIO_24_31 9 -#define IRQ_ORION_PCIE0_ERR 10 -#define IRQ_ORION_PCIE0_INT 11 -#define IRQ_ORION_USB1_CTRL 12 -#define IRQ_ORION_DEV_BUS_ERR 14 -#define IRQ_ORION_PCI_ERR 15 -#define IRQ_ORION_USB_BR_ERR 16 -#define IRQ_ORION_USB0_CTRL 17 -#define IRQ_ORION_ETH_RX 18 -#define IRQ_ORION_ETH_TX 19 -#define IRQ_ORION_ETH_MISC 20 -#define IRQ_ORION_ETH_SUM 21 -#define IRQ_ORION_ETH_ERR 22 -#define IRQ_ORION_IDMA_ERR 23 -#define IRQ_ORION_IDMA_0 24 -#define IRQ_ORION_IDMA_1 25 -#define IRQ_ORION_IDMA_2 26 -#define IRQ_ORION_IDMA_3 27 -#define IRQ_ORION_CESA 28 -#define IRQ_ORION_SATA 29 -#define IRQ_ORION_XOR0 30 -#define IRQ_ORION_XOR1 31 - -/* - * Orion General Purpose Pins - */ -#define IRQ_ORION_GPIO_START 32 -#define NR_GPIO_IRQS GPIO_MAX - -#define NR_IRQS (IRQ_ORION_GPIO_START + NR_GPIO_IRQS) - -#endif /* __ASM_ARCH_IRQS_H__ */ diff --git a/include/asm-arm/arch-orion/orion.h b/include/asm-arm/arch-orion/orion.h deleted file mode 100644 index 673a418a741..00000000000 --- a/include/asm-arm/arch-orion/orion.h +++ /dev/null @@ -1,165 +0,0 @@ -/* - * include/asm-arm/arch-orion/orion.h - * - * Generic definitions of Orion SoC flavors: - * Orion-1, Orion-NAS, Orion-VoIP, and Orion-2. - * - * Maintainer: Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_ORION_H__ -#define __ASM_ARCH_ORION_H__ - -/***************************************************************************** - * Orion Address Map - * - * virt phys size - * fdd00000 f1000000 1M on-chip peripheral registers - * fde00000 f2000000 1M PCIe I/O space - * fdf00000 f2100000 1M PCI I/O space - * fe000000 f0000000 16M PCIe WA space (Orion-NAS only) - ****************************************************************************/ -#define ORION_REGS_PHYS_BASE 0xf1000000 -#define ORION_REGS_VIRT_BASE 0xfdd00000 -#define ORION_REGS_SIZE SZ_1M - -#define ORION_PCIE_IO_PHYS_BASE 0xf2000000 -#define ORION_PCIE_IO_VIRT_BASE 0xfde00000 -#define ORION_PCIE_IO_BUS_BASE 0x00000000 -#define ORION_PCIE_IO_SIZE SZ_1M - -#define ORION_PCI_IO_PHYS_BASE 0xf2100000 -#define ORION_PCI_IO_VIRT_BASE 0xfdf00000 -#define ORION_PCI_IO_BUS_BASE 0x00100000 -#define ORION_PCI_IO_SIZE SZ_1M - -/* Relevant only for Orion-NAS */ -#define ORION_PCIE_WA_PHYS_BASE 0xf0000000 -#define ORION_PCIE_WA_VIRT_BASE 0xfe000000 -#define ORION_PCIE_WA_SIZE SZ_16M - -#define ORION_PCIE_MEM_PHYS_BASE 0xe0000000 -#define ORION_PCIE_MEM_SIZE SZ_128M - -#define ORION_PCI_MEM_PHYS_BASE 0xe8000000 -#define ORION_PCI_MEM_SIZE SZ_128M - -/******************************************************************************* - * Supported Devices & Revisions - ******************************************************************************/ -/* Orion-1 (88F5181) */ -#define MV88F5181_DEV_ID 0x5181 -#define MV88F5181_REV_B1 3 -/* Orion-NAS (88F5182) */ -#define MV88F5182_DEV_ID 0x5182 -#define MV88F5182_REV_A2 2 -/* Orion-2 (88F5281) */ -#define MV88F5281_DEV_ID 0x5281 -#define MV88F5281_REV_D1 5 -#define MV88F5281_REV_D2 6 - -/******************************************************************************* - * Orion Registers Map - ******************************************************************************/ -#define ORION_DDR_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x00000) -#define ORION_DDR_REG(x) (ORION_DDR_VIRT_BASE | (x)) - -#define ORION_DEV_BUS_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x10000) -#define ORION_DEV_BUS_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x10000) -#define ORION_DEV_BUS_REG(x) (ORION_DEV_BUS_VIRT_BASE | (x)) -#define I2C_PHYS_BASE (ORION_DEV_BUS_PHYS_BASE | 0x1000) -#define UART0_PHYS_BASE (ORION_DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (ORION_DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (ORION_DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (ORION_DEV_BUS_VIRT_BASE | 0x2100) - -#define ORION_BRIDGE_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x20000) -#define ORION_BRIDGE_REG(x) (ORION_BRIDGE_VIRT_BASE | (x)) - -#define ORION_PCI_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x30000) -#define ORION_PCI_REG(x) (ORION_PCI_VIRT_BASE | (x)) - -#define ORION_PCIE_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x40000) -#define ORION_PCIE_REG(x) (ORION_PCIE_VIRT_BASE | (x)) - -#define ORION_USB0_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x50000) -#define ORION_USB0_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x50000) -#define ORION_USB0_REG(x) (ORION_USB0_VIRT_BASE | (x)) - -#define ORION_ETH_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x70000) -#define ORION_ETH_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x70000) -#define ORION_ETH_REG(x) (ORION_ETH_VIRT_BASE | (x)) - -#define ORION_SATA_PHYS_BASE (ORION_REGS_PHYS_BASE | 0x80000) -#define ORION_SATA_VIRT_BASE (ORION_REGS_VIRT_BASE | 0x80000) -#define ORION_SATA_REG(x) (ORION_SATA_VIRT_BASE | (x)) - -#define ORION_USB1_PHYS_BASE (ORION_REGS_PHYS_BASE | 0xa0000) -#define ORION_USB1_VIRT_BASE (ORION_REGS_VIRT_BASE | 0xa0000) -#define ORION_USB1_REG(x) (ORION_USB1_VIRT_BASE | (x)) - -/******************************************************************************* - * Device Bus Registers - ******************************************************************************/ -#define MPP_0_7_CTRL ORION_DEV_BUS_REG(0x000) -#define MPP_8_15_CTRL ORION_DEV_BUS_REG(0x004) -#define MPP_16_19_CTRL ORION_DEV_BUS_REG(0x050) -#define MPP_DEV_CTRL ORION_DEV_BUS_REG(0x008) -#define MPP_RESET_SAMPLE ORION_DEV_BUS_REG(0x010) -#define GPIO_OUT ORION_DEV_BUS_REG(0x100) -#define GPIO_IO_CONF ORION_DEV_BUS_REG(0x104) -#define GPIO_BLINK_EN ORION_DEV_BUS_REG(0x108) -#define GPIO_IN_POL ORION_DEV_BUS_REG(0x10c) -#define GPIO_DATA_IN ORION_DEV_BUS_REG(0x110) -#define GPIO_EDGE_CAUSE ORION_DEV_BUS_REG(0x114) -#define GPIO_EDGE_MASK ORION_DEV_BUS_REG(0x118) -#define GPIO_LEVEL_MASK ORION_DEV_BUS_REG(0x11c) -#define DEV_BANK_0_PARAM ORION_DEV_BUS_REG(0x45c) -#define DEV_BANK_1_PARAM ORION_DEV_BUS_REG(0x460) -#define DEV_BANK_2_PARAM ORION_DEV_BUS_REG(0x464) -#define DEV_BANK_BOOT_PARAM ORION_DEV_BUS_REG(0x46c) -#define DEV_BUS_CTRL ORION_DEV_BUS_REG(0x4c0) -#define DEV_BUS_INT_CAUSE ORION_DEV_BUS_REG(0x4d0) -#define DEV_BUS_INT_MASK ORION_DEV_BUS_REG(0x4d4) -#define GPIO_MAX 32 - -/*************************************************************************** - * Orion CPU Bridge Registers - **************************************************************************/ -#define CPU_CONF ORION_BRIDGE_REG(0x100) -#define CPU_CTRL ORION_BRIDGE_REG(0x104) -#define CPU_RESET_MASK ORION_BRIDGE_REG(0x108) -#define CPU_SOFT_RESET ORION_BRIDGE_REG(0x10c) -#define POWER_MNG_CTRL_REG ORION_BRIDGE_REG(0x11C) -#define BRIDGE_CAUSE ORION_BRIDGE_REG(0x110) -#define BRIDGE_MASK ORION_BRIDGE_REG(0x114) -#define MAIN_IRQ_CAUSE ORION_BRIDGE_REG(0x200) -#define MAIN_IRQ_MASK ORION_BRIDGE_REG(0x204) -#define TIMER_CTRL ORION_BRIDGE_REG(0x300) -#define TIMER_VAL(x) ORION_BRIDGE_REG(0x314 + ((x) * 8)) -#define TIMER_VAL_RELOAD(x) ORION_BRIDGE_REG(0x310 + ((x) * 8)) - -#ifndef __ASSEMBLY__ - -/******************************************************************************* - * Helpers to access Orion registers - ******************************************************************************/ -#include <asm/types.h> -#include <asm/io.h> - -#define orion_read(r) __raw_readl(r) -#define orion_write(r, val) __raw_writel(val, r) - -/* - * These are not preempt safe. Locks, if needed, must be taken care by caller. - */ -#define orion_setbits(r, mask) orion_write((r), orion_read(r) | (mask)) -#define orion_clrbits(r, mask) orion_write((r), orion_read(r) & ~(mask)) - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASM_ARCH_ORION_H__ */ diff --git a/include/asm-arm/arch-orion/timex.h b/include/asm-arm/arch-orion/timex.h deleted file mode 100644 index 26c2c91eecf..00000000000 --- a/include/asm-arm/arch-orion/timex.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * include/asm-arm/arch-orion/timex.h - * - * Tzachi Perelstein <tzachi@marvell.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define ORION_TCLK 166666667 -#define CLOCK_TICK_RATE ORION_TCLK diff --git a/include/asm-arm/arch-orion/debug-macro.S b/include/asm-arm/arch-orion5x/debug-macro.S index 2746220f5d8..4f98f3ba292 100644 --- a/include/asm-arm/arch-orion/debug-macro.S +++ b/include/asm-arm/arch-orion5x/debug-macro.S @@ -1,5 +1,5 @@ /* - * linux/include/asm-arm/arch-orion/debug-macro.S + * include/asm-arm/arch-orion5x/debug-macro.S * * Debugging macro include header * @@ -8,13 +8,13 @@ * published by the Free Software Foundation. */ -#include <asm/arch/orion.h> +#include <asm/arch/orion5x.h> .macro addruart,rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? - ldreq \rx, =ORION_REGS_PHYS_BASE - ldrne \rx, =ORION_REGS_VIRT_BASE + ldreq \rx, =ORION5X_REGS_PHYS_BASE + ldrne \rx, =ORION5X_REGS_VIRT_BASE orr \rx, \rx, #0x00012000 .endm diff --git a/include/asm-arm/arch-orion/dma.h b/include/asm-arm/arch-orion5x/dma.h index 40a8c178f10..40a8c178f10 100644 --- a/include/asm-arm/arch-orion/dma.h +++ b/include/asm-arm/arch-orion5x/dma.h diff --git a/include/asm-arm/arch-orion/entry-macro.S b/include/asm-arm/arch-orion5x/entry-macro.S index cda096b2acf..d8ef54c0ee9 100644 --- a/include/asm-arm/arch-orion/entry-macro.S +++ b/include/asm-arm/arch-orion5x/entry-macro.S @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-orion/entry-macro.S + * include/asm-arm/arch-orion5x/entry-macro.S * * Low-level IRQ helper macros for Orion platforms * @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include <asm/arch/orion.h> +#include <asm/arch/orion5x.h> .macro disable_fiq .endm diff --git a/include/asm-arm/arch-orion/gpio.h b/include/asm-arm/arch-orion5x/gpio.h index d66284f9a14..c85e498388b 100644 --- a/include/asm-arm/arch-orion/gpio.h +++ b/include/asm-arm/arch-orion5x/gpio.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-orion/gpio.h + * include/asm-arm/arch-orion5x/gpio.h * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -12,17 +12,17 @@ extern int gpio_direction_input(unsigned pin); extern int gpio_direction_output(unsigned pin, int value); extern int gpio_get_value(unsigned pin); extern void gpio_set_value(unsigned pin, int value); -extern void orion_gpio_set_blink(unsigned pin, int blink); +extern void orion5x_gpio_set_blink(unsigned pin, int blink); extern void gpio_display(void); /* debug */ static inline int gpio_to_irq(int pin) { - return pin + IRQ_ORION_GPIO_START; + return pin + IRQ_ORION5X_GPIO_START; } static inline int irq_to_gpio(int irq) { - return irq - IRQ_ORION_GPIO_START; + return irq - IRQ_ORION5X_GPIO_START; } #include <asm-generic/gpio.h> /* cansleep wrappers */ diff --git a/include/asm-arm/arch-orion/hardware.h b/include/asm-arm/arch-orion5x/hardware.h index 65da374de73..5d2d8e0b563 100644 --- a/include/asm-arm/arch-orion/hardware.h +++ b/include/asm-arm/arch-orion5x/hardware.h @@ -1,21 +1,21 @@ /* - * include/asm-arm/arch-orion/hardware.h + * include/asm-arm/arch-orion5x/hardware.h * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_HARDWARE_H__ -#define __ASM_ARCH_HARDWARE_H__ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H -#include "orion.h" +#include "orion5x.h" #define pcibios_assign_all_busses() 1 #define PCIBIOS_MIN_IO 0x00001000 #define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE ORION_PCIE_MEM_PHYS_BASE +#define PCIMEM_BASE ORION5X_PCIE_MEM_PHYS_BASE #endif diff --git a/include/asm-arm/arch-orion5x/io.h b/include/asm-arm/arch-orion5x/io.h new file mode 100644 index 00000000000..50f8c880220 --- /dev/null +++ b/include/asm-arm/arch-orion5x/io.h @@ -0,0 +1,67 @@ +/* + * include/asm-arm/arch-orion5x/io.h + * + * Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include "orion5x.h" + +#define IO_SPACE_LIMIT 0xffffffff +#define IO_SPACE_REMAP ORION5X_PCI_SYS_IO_BASE + +static inline void __iomem * +__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype) +{ + void __iomem *retval; + unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE; + if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE && + size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) { + retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs; + } else { + retval = __arm_ioremap(paddr, size, mtype); + } + + return retval; +} + +static inline void +__arch_iounmap(void __iomem *addr) +{ + if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE || + addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE)) + __iounmap(addr); +} + +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)addr; +} + +#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m) +#define __arch_iounmap(a) __arch_iounmap(a) +#define __io(a) __io(a) +#define __mem_pci(a) (a) + + +/***************************************************************************** + * Helpers to access Orion registers + ****************************************************************************/ +#define orion5x_read(r) __raw_readl(r) +#define orion5x_write(r, val) __raw_writel(val, r) + +/* + * These are not preempt-safe. Locks, if needed, must be taken + * care of by the caller. + */ +#define orion5x_setbits(r, mask) orion5x_write((r), orion5x_read(r) | (mask)) +#define orion5x_clrbits(r, mask) orion5x_write((r), orion5x_read(r) & ~(mask)) + + +#endif diff --git a/include/asm-arm/arch-orion5x/irqs.h b/include/asm-arm/arch-orion5x/irqs.h new file mode 100644 index 00000000000..abdd61a4833 --- /dev/null +++ b/include/asm-arm/arch-orion5x/irqs.h @@ -0,0 +1,62 @@ +/* + * include/asm-arm/arch-orion5x/irqs.h + * + * IRQ definitions for Orion SoC + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#include "orion5x.h" /* need GPIO_MAX */ + +/* + * Orion Main Interrupt Controller + */ +#define IRQ_ORION5X_BRIDGE 0 +#define IRQ_ORION5X_DOORBELL_H2C 1 +#define IRQ_ORION5X_DOORBELL_C2H 2 +#define IRQ_ORION5X_UART0 3 +#define IRQ_ORION5X_UART1 4 +#define IRQ_ORION5X_I2C 5 +#define IRQ_ORION5X_GPIO_0_7 6 +#define IRQ_ORION5X_GPIO_8_15 7 +#define IRQ_ORION5X_GPIO_16_23 8 +#define IRQ_ORION5X_GPIO_24_31 9 +#define IRQ_ORION5X_PCIE0_ERR 10 +#define IRQ_ORION5X_PCIE0_INT 11 +#define IRQ_ORION5X_USB1_CTRL 12 +#define IRQ_ORION5X_DEV_BUS_ERR 14 +#define IRQ_ORION5X_PCI_ERR 15 +#define IRQ_ORION5X_USB_BR_ERR 16 +#define IRQ_ORION5X_USB0_CTRL 17 +#define IRQ_ORION5X_ETH_RX 18 +#define IRQ_ORION5X_ETH_TX 19 +#define IRQ_ORION5X_ETH_MISC 20 +#define IRQ_ORION5X_ETH_SUM 21 +#define IRQ_ORION5X_ETH_ERR 22 +#define IRQ_ORION5X_IDMA_ERR 23 +#define IRQ_ORION5X_IDMA_0 24 +#define IRQ_ORION5X_IDMA_1 25 +#define IRQ_ORION5X_IDMA_2 26 +#define IRQ_ORION5X_IDMA_3 27 +#define IRQ_ORION5X_CESA 28 +#define IRQ_ORION5X_SATA 29 +#define IRQ_ORION5X_XOR0 30 +#define IRQ_ORION5X_XOR1 31 + +/* + * Orion General Purpose Pins + */ +#define IRQ_ORION5X_GPIO_START 32 +#define NR_GPIO_IRQS GPIO_MAX + +#define NR_IRQS (IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS) + + +#endif diff --git a/include/asm-arm/arch-orion/memory.h b/include/asm-arm/arch-orion5x/memory.h index d954dba87ce..80053a7afc7 100644 --- a/include/asm-arm/arch-orion/memory.h +++ b/include/asm-arm/arch-orion5x/memory.h @@ -1,15 +1,16 @@ /* - * include/asm-arm/arch-orion/memory.h + * include/asm-arm/arch-orion5x/memory.h * * Marvell Orion memory definitions */ -#ifndef __ASM_ARCH_MMU_H -#define __ASM_ARCH_MMU_H +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H #define PHYS_OFFSET UL(0x00000000) #define __virt_to_bus(x) __virt_to_phys(x) #define __bus_to_virt(x) __phys_to_virt(x) + #endif diff --git a/include/asm-arm/arch-orion5x/orion5x.h b/include/asm-arm/arch-orion5x/orion5x.h new file mode 100644 index 00000000000..206ddd71e19 --- /dev/null +++ b/include/asm-arm/arch-orion5x/orion5x.h @@ -0,0 +1,159 @@ +/* + * include/asm-arm/arch-orion5x/orion5x.h + * + * Generic definitions of Orion SoC flavors: + * Orion-1, Orion-NAS, Orion-VoIP, and Orion-2. + * + * Maintainer: Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_ORION5X_H +#define __ASM_ARCH_ORION5X_H + +/***************************************************************************** + * Orion Address Maps + * + * phys + * e0000000 PCIe MEM space + * e8000000 PCI MEM space + * f0000000 PCIe WA space (Orion-1/Orion-NAS only) + * f1000000 on-chip peripheral registers + * f2000000 PCIe I/O space + * f2100000 PCI I/O space + * f4000000 device bus mappings (boot) + * fa000000 device bus mappings (cs0) + * fa800000 device bus mappings (cs2) + * fc000000 device bus mappings (cs0/cs1) + * + * virt phys size + * fdd00000 f1000000 1M on-chip peripheral registers + * fde00000 f2000000 1M PCIe I/O space + * fdf00000 f2100000 1M PCI I/O space + * fe000000 f0000000 16M PCIe WA space (Orion-1/Orion-NAS only) + ****************************************************************************/ +#define ORION5X_REGS_PHYS_BASE 0xf1000000 +#define ORION5X_REGS_VIRT_BASE 0xfdd00000 +#define ORION5X_REGS_SIZE SZ_1M + +#define ORION5X_PCIE_IO_PHYS_BASE 0xf2000000 +#define ORION5X_PCIE_IO_VIRT_BASE 0xfde00000 +#define ORION5X_PCIE_IO_BUS_BASE 0x00000000 +#define ORION5X_PCIE_IO_SIZE SZ_1M + +#define ORION5X_PCI_IO_PHYS_BASE 0xf2100000 +#define ORION5X_PCI_IO_VIRT_BASE 0xfdf00000 +#define ORION5X_PCI_IO_BUS_BASE 0x00100000 +#define ORION5X_PCI_IO_SIZE SZ_1M + +/* Relevant only for Orion-1/Orion-NAS */ +#define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000 +#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000 +#define ORION5X_PCIE_WA_SIZE SZ_16M + +#define ORION5X_PCIE_MEM_PHYS_BASE 0xe0000000 +#define ORION5X_PCIE_MEM_SIZE SZ_128M + +#define ORION5X_PCI_MEM_PHYS_BASE 0xe8000000 +#define ORION5X_PCI_MEM_SIZE SZ_128M + +/******************************************************************************* + * Supported Devices & Revisions + ******************************************************************************/ +/* Orion-1 (88F5181) */ +#define MV88F5181_DEV_ID 0x5181 +#define MV88F5181_REV_B1 3 +/* Orion-NAS (88F5182) */ +#define MV88F5182_DEV_ID 0x5182 +#define MV88F5182_REV_A2 2 +/* Orion-2 (88F5281) */ +#define MV88F5281_DEV_ID 0x5281 +#define MV88F5281_REV_D1 5 +#define MV88F5281_REV_D2 6 + +/******************************************************************************* + * Orion Registers Map + ******************************************************************************/ +#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000) +#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) + +#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) +#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) +#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x)) +#define I2C_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x1000) +#define UART0_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2000) +#define UART0_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2000) +#define UART1_PHYS_BASE (ORION5X_DEV_BUS_PHYS_BASE | 0x2100) +#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) + +#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) +#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) +#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) + +#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) +#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) + +#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000) +#define ORION5X_PCIE_REG(x) (ORION5X_PCIE_VIRT_BASE | (x)) + +#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000) +#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000) +#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x)) + +#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000) +#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000) +#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x)) + +#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) +#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) +#define ORION5X_SATA_REG(x) (ORION5X_SATA_VIRT_BASE | (x)) + +#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) +#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) +#define ORION5X_USB1_REG(x) (ORION5X_USB1_VIRT_BASE | (x)) + +/******************************************************************************* + * Device Bus Registers + ******************************************************************************/ +#define MPP_0_7_CTRL ORION5X_DEV_BUS_REG(0x000) +#define MPP_8_15_CTRL ORION5X_DEV_BUS_REG(0x004) +#define MPP_16_19_CTRL ORION5X_DEV_BUS_REG(0x050) +#define MPP_DEV_CTRL ORION5X_DEV_BUS_REG(0x008) +#define MPP_RESET_SAMPLE ORION5X_DEV_BUS_REG(0x010) +#define GPIO_OUT ORION5X_DEV_BUS_REG(0x100) +#define GPIO_IO_CONF ORION5X_DEV_BUS_REG(0x104) +#define GPIO_BLINK_EN ORION5X_DEV_BUS_REG(0x108) +#define GPIO_IN_POL ORION5X_DEV_BUS_REG(0x10c) +#define GPIO_DATA_IN ORION5X_DEV_BUS_REG(0x110) +#define GPIO_EDGE_CAUSE ORION5X_DEV_BUS_REG(0x114) +#define GPIO_EDGE_MASK ORION5X_DEV_BUS_REG(0x118) +#define GPIO_LEVEL_MASK ORION5X_DEV_BUS_REG(0x11c) +#define DEV_BANK_0_PARAM ORION5X_DEV_BUS_REG(0x45c) +#define DEV_BANK_1_PARAM ORION5X_DEV_BUS_REG(0x460) +#define DEV_BANK_2_PARAM ORION5X_DEV_BUS_REG(0x464) +#define DEV_BANK_BOOT_PARAM ORION5X_DEV_BUS_REG(0x46c) +#define DEV_BUS_CTRL ORION5X_DEV_BUS_REG(0x4c0) +#define DEV_BUS_INT_CAUSE ORION5X_DEV_BUS_REG(0x4d0) +#define DEV_BUS_INT_MASK ORION5X_DEV_BUS_REG(0x4d4) +#define GPIO_MAX 32 + +/*************************************************************************** + * Orion CPU Bridge Registers + **************************************************************************/ +#define CPU_CONF ORION5X_BRIDGE_REG(0x100) +#define CPU_CTRL ORION5X_BRIDGE_REG(0x104) +#define CPU_RESET_MASK ORION5X_BRIDGE_REG(0x108) +#define CPU_SOFT_RESET ORION5X_BRIDGE_REG(0x10c) +#define POWER_MNG_CTRL_REG ORION5X_BRIDGE_REG(0x11C) +#define BRIDGE_CAUSE ORION5X_BRIDGE_REG(0x110) +#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200) +#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204) + + +#endif diff --git a/include/asm-arm/arch-orion/system.h b/include/asm-arm/arch-orion5x/system.h index 17704c68f90..3f1d1e2d38f 100644 --- a/include/asm-arm/arch-orion/system.h +++ b/include/asm-arm/arch-orion5x/system.h @@ -1,10 +1,10 @@ /* - * include/asm-arm/arch-orion/system.h + * include/asm-arm/arch-orion5x/system.h * * Tzachi Perelstein <tzachi@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ @@ -12,7 +12,7 @@ #define __ASM_ARCH_SYSTEM_H #include <asm/arch/hardware.h> -#include <asm/arch/orion.h> +#include <asm/arch/orion5x.h> static inline void arch_idle(void) { @@ -24,8 +24,9 @@ static inline void arch_reset(char mode) /* * Enable and issue soft reset */ - orion_setbits(CPU_RESET_MASK, (1 << 2)); - orion_setbits(CPU_SOFT_RESET, 1); + orion5x_setbits(CPU_RESET_MASK, (1 << 2)); + orion5x_setbits(CPU_SOFT_RESET, 1); } + #endif diff --git a/include/asm-arm/arch-orion5x/timex.h b/include/asm-arm/arch-orion5x/timex.h new file mode 100644 index 00000000000..31c568e28cc --- /dev/null +++ b/include/asm-arm/arch-orion5x/timex.h @@ -0,0 +1,13 @@ +/* + * include/asm-arm/arch-orion5x/timex.h + * + * Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define CLOCK_TICK_RATE (100 * HZ) + +#define ORION5X_TCLK 166666667 diff --git a/include/asm-arm/arch-orion/uncompress.h b/include/asm-arm/arch-orion5x/uncompress.h index 59f44039909..5c13d4fafb4 100644 --- a/include/asm-arm/arch-orion/uncompress.h +++ b/include/asm-arm/arch-orion5x/uncompress.h @@ -1,14 +1,14 @@ /* - * include/asm-arm/arch-orion/uncompress.h + * include/asm-arm/arch-orion5x/uncompress.h * * Tzachi Perelstein <tzachi@marvell.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <asm/arch/orion.h> +#include <asm/arch/orion5x.h> #define MV_UART_THR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0)) #define MV_UART_LSR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14)) diff --git a/include/asm-arm/arch-orion/vmalloc.h b/include/asm-arm/arch-orion5x/vmalloc.h index 9d580278d2b..2b3061e90dc 100644 --- a/include/asm-arm/arch-orion/vmalloc.h +++ b/include/asm-arm/arch-orion5x/vmalloc.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-orion/vmalloc.h + * include/asm-arm/arch-orion5x/vmalloc.h */ #define VMALLOC_END 0xfd800000 diff --git a/include/asm-arm/arch-pxa/camera.h b/include/asm-arm/arch-pxa/camera.h new file mode 100644 index 00000000000..39516ced8b1 --- /dev/null +++ b/include/asm-arm/arch-pxa/camera.h @@ -0,0 +1,48 @@ +/* + camera.h - PXA camera driver header file + + Copyright (C) 2003, Intel Corporation + Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __ASM_ARCH_CAMERA_H_ +#define __ASM_ARCH_CAMERA_H_ + +#define PXA_CAMERA_MASTER 1 +#define PXA_CAMERA_DATAWIDTH_4 2 +#define PXA_CAMERA_DATAWIDTH_5 4 +#define PXA_CAMERA_DATAWIDTH_8 8 +#define PXA_CAMERA_DATAWIDTH_9 0x10 +#define PXA_CAMERA_DATAWIDTH_10 0x20 +#define PXA_CAMERA_PCLK_EN 0x40 +#define PXA_CAMERA_MCLK_EN 0x80 +#define PXA_CAMERA_PCP 0x100 +#define PXA_CAMERA_HSP 0x200 +#define PXA_CAMERA_VSP 0x400 + +struct pxacamera_platform_data { + int (*init)(struct device *); + int (*power)(struct device *, int); + int (*reset)(struct device *, int); + + unsigned long flags; + unsigned long mclk_10khz; +}; + +extern void pxa_set_camera_info(struct pxacamera_platform_data *); + +#endif /* __ASM_ARCH_CAMERA_H_ */ diff --git a/include/asm-arm/arch-pxa/gumstix.h b/include/asm-arm/arch-pxa/gumstix.h new file mode 100644 index 00000000000..6fa85c4f94f --- /dev/null +++ b/include/asm-arm/arch-pxa/gumstix.h @@ -0,0 +1,96 @@ +/* + * linux/include/asm-arm/arch-pxa/gumstix.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +/* BTRESET - Reset line to Bluetooth module, active low signal. */ +#define GPIO_GUMSTIX_BTRESET 7 +#define GPIO_GUMSTIX_BTRESET_MD (GPIO_GUMSTIX_BTRESET | GPIO_OUT) + + +/* +GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean +interrupt signal for determining cable presence. On the original gumstix, +this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F, +this moves to GPIO17 and GPIO37. */ + +/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn +has detected a cable insertion; driven low otherwise. */ + +#ifdef CONFIG_ARCH_GUMSTIX_ORIG + +#define GPIO_GUMSTIX_USB_GPIOn 81 +#define GPIO_GUMSTIX_USB_GPIOx 83 + +#else + +#define GPIO_GUMSTIX_USB_GPIOn 35 +#define GPIO_GUMSTIX_USB_GPIOx 41 + +#endif + +/* usb state change */ +#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn) + +#define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN) +#define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT) +#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_IN) + +/* + * SD/MMC definitions + */ +#define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */ +#define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */ +#define GUMSTIX_IRQ_GPIO_nSD_DETECT IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT) + +/* + * SMC Ethernet definitions + * ETH_RST provides a hardware reset line to the ethernet chip + * ETH is the IRQ line in from the ethernet chip to the PXA + */ +#define GPIO_GUMSTIX_ETH0_RST 80 +#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT) +#define GPIO_GUMSTIX_ETH1_RST 52 +#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT) + +#define GPIO_GUMSTIX_ETH0 36 +#define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN) +#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0) +#define GPIO_GUMSTIX_ETH1 27 +#define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN) +#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1) + + +/* CF reset line */ +#define GPIO8_RESET 8 + +/* CF slot 0 */ +#define GPIO4_nBVD1 4 +#define GPIO4_nSTSCHG GPIO4_nBVD1 +#define GPIO11_nCD 11 +#define GPIO26_PRDY_nBSY 26 +#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG) +#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO11_nCD) +#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY) + +/* CF slot 1 */ +#define GPIO18_nBVD1 18 +#define GPIO18_nSTSCHG GPIO18_nBVD1 +#define GPIO36_nCD 36 +#define GPIO27_PRDY_nBSY 27 +#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO18_nSTSCHG) +#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO36_nCD) +#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO27_PRDY_nBSY) + +/* CF GPIO line modes */ +#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN) +#define GPIO8_RESET_MD (GPIO8_RESET | GPIO_OUT) +#define GPIO11_nCD_MD (GPIO11_nCD | GPIO_IN) +#define GPIO18_nSTSCHG_MD (GPIO18_nSTSCHG | GPIO_IN) +#define GPIO26_PRDY_nBSY_MD (GPIO26_PRDY_nBSY | GPIO_IN) +#define GPIO27_PRDY_nBSY_MD (GPIO27_PRDY_nBSY | GPIO_IN) +#define GPIO36_nCD_MD (GPIO36_nCD | GPIO_IN) diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h index 748406f384c..99f4f423a8e 100644 --- a/include/asm-arm/arch-pxa/irda.h +++ b/include/asm-arm/arch-pxa/irda.h @@ -10,6 +10,8 @@ struct pxaficp_platform_data { int transceiver_cap; void (*transceiver_mode)(struct device *dev, int mode); + int (*startup)(struct device *dev); + void (*shutdown)(struct device *dev); }; extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index c562b972a4a..b6c8fe37768 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h @@ -181,7 +181,8 @@ #elif defined(CONFIG_ARCH_LUBBOCK) || \ defined(CONFIG_MACH_LOGICPD_PXA270) || \ defined(CONFIG_MACH_MAINSTONE) || \ - defined(CONFIG_MACH_PCM027) + defined(CONFIG_MACH_PCM027) || \ + defined(CONFIG_MACH_MAGICIAN) #define NR_IRQS (IRQ_BOARD_END) #else #define NR_IRQS (IRQ_BOARD_START) @@ -238,7 +239,7 @@ /* ITE8152 irqs */ /* add IT8152 IRQs beyond BOARD_END */ #ifdef CONFIG_PCI_HOST_ITE8152 -#define IT8152_IRQ(x) (IRQ_GPIO(IRQ_BOARD_END) + 1 + (x)) +#define IT8152_IRQ(x) (IRQ_BOARD_END + (x)) /* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ #define IT8152_LD_IRQ_COUNT 9 @@ -252,6 +253,9 @@ #define IT8152_LAST_IRQ IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1) +#if NR_IRQS < (IT8152_LAST_IRQ+1) #undef NR_IRQS #define NR_IRQS (IT8152_LAST_IRQ+1) #endif + +#endif /* CONFIG_PCI_HOST_ITE8152 */ diff --git a/include/asm-arm/arch-pxa/magician.h b/include/asm-arm/arch-pxa/magician.h index 337f51f06b3..169b374f992 100644 --- a/include/asm-arm/arch-pxa/magician.h +++ b/include/asm-arm/arch-pxa/magician.h @@ -12,7 +12,7 @@ #ifndef _MAGICIAN_H_ #define _MAGICIAN_H_ -#include <asm/arch/pxa-regs.h> +#include <asm/arch/irqs.h> /* * PXA GPIOs @@ -34,6 +34,7 @@ #define GPIO48_MAGICIAN_UNKNOWN 48 #define GPIO56_MAGICIAN_UNKNOWN 56 #define GPIO57_MAGICIAN_CAM_RESET 57 +#define GPIO75_MAGICIAN_SAMSUNG_POWER 75 #define GPIO83_MAGICIAN_nIR_EN 83 #define GPIO86_MAGICIAN_GSM_RESET 86 #define GPIO87_MAGICIAN_GSM_SELECT 87 @@ -62,50 +63,55 @@ #define GPIO120_MAGICIAN_UNKNOWN 120 /* - * PXA GPIO alternate function mode & direction + * CPLD IRQs */ -#define GPIO0_MAGICIAN_KEY_POWER_MD (0 | GPIO_IN) -#define GPIO9_MAGICIAN_UNKNOWN_MD (9 | GPIO_IN) -#define GPIO10_MAGICIAN_GSM_IRQ_MD (10 | GPIO_IN) -#define GPIO11_MAGICIAN_GSM_OUT1_MD (11 | GPIO_OUT) -#define GPIO13_MAGICIAN_CPLD_IRQ_MD (13 | GPIO_IN) -#define GPIO18_MAGICIAN_UNKNOWN_MD (18 | GPIO_OUT) -#define GPIO22_MAGICIAN_VIBRA_EN_MD (22 | GPIO_OUT) -#define GPIO26_MAGICIAN_GSM_POWER_MD (26 | GPIO_OUT) -#define GPIO27_MAGICIAN_USBC_PUEN_MD (27 | GPIO_OUT) -#define GPIO30_MAGICIAN_nCHARGE_EN_MD (30 | GPIO_OUT) -#define GPIO37_MAGICIAN_KEY_HANGUP_MD (37 | GPIO_OUT) -#define GPIO38_MAGICIAN_KEY_CONTACTS_MD (38 | GPIO_OUT) -#define GPIO40_MAGICIAN_GSM_OUT2_MD (40 | GPIO_OUT) -#define GPIO48_MAGICIAN_UNKNOWN_MD (48 | GPIO_OUT) -#define GPIO56_MAGICIAN_UNKNOWN_MD (56 | GPIO_OUT) -#define GPIO57_MAGICIAN_CAM_RESET_MD (57 | GPIO_OUT) -#define GPIO83_MAGICIAN_nIR_EN_MD (83 | GPIO_OUT) -#define GPIO86_MAGICIAN_GSM_RESET_MD (86 | GPIO_OUT) -#define GPIO87_MAGICIAN_GSM_SELECT_MD (87 | GPIO_OUT) -#define GPIO90_MAGICIAN_KEY_CALENDAR_MD (90 | GPIO_OUT) -#define GPIO91_MAGICIAN_KEY_CAMERA_MD (91 | GPIO_OUT) -#define GPIO93_MAGICIAN_KEY_UP_MD (93 | GPIO_IN) -#define GPIO94_MAGICIAN_KEY_DOWN_MD (94 | GPIO_IN) -#define GPIO95_MAGICIAN_KEY_LEFT_MD (95 | GPIO_IN) -#define GPIO96_MAGICIAN_KEY_RIGHT_MD (96 | GPIO_IN) -#define GPIO97_MAGICIAN_KEY_ENTER_MD (97 | GPIO_IN) -#define GPIO98_MAGICIAN_KEY_RECORD_MD (98 | GPIO_IN) -#define GPIO99_MAGICIAN_HEADPHONE_IN_MD (99 | GPIO_IN) -#define GPIO100_MAGICIAN_KEY_VOL_UP_MD (100 | GPIO_IN) -#define GPIO101_MAGICIAN_KEY_VOL_DOWN_MD (101 | GPIO_IN) -#define GPIO102_MAGICIAN_KEY_PHONE_MD (102 | GPIO_IN) -#define GPIO103_MAGICIAN_LED_KP_MD (103 | GPIO_OUT) -#define GPIO104_MAGICIAN_LCD_POWER_1_MD (104 | GPIO_OUT) -#define GPIO105_MAGICIAN_LCD_POWER_2_MD (105 | GPIO_OUT) -#define GPIO106_MAGICIAN_LCD_POWER_3_MD (106 | GPIO_OUT) -#define GPIO107_MAGICIAN_DS1WM_IRQ_MD (107 | GPIO_IN) -#define GPIO108_MAGICIAN_GSM_READY_MD (108 | GPIO_IN) -#define GPIO114_MAGICIAN_UNKNOWN_MD (114 | GPIO_OUT) -#define GPIO115_MAGICIAN_nPEN_IRQ_MD (115 | GPIO_IN) -#define GPIO116_MAGICIAN_nCAM_EN_MD (116 | GPIO_OUT) -#define GPIO119_MAGICIAN_UNKNOWN_MD (119 | GPIO_OUT) -#define GPIO120_MAGICIAN_UNKNOWN_MD (120 | GPIO_OUT) +#define IRQ_MAGICIAN_SD (IRQ_BOARD_START + 0) +#define IRQ_MAGICIAN_EP (IRQ_BOARD_START + 1) +#define IRQ_MAGICIAN_BT (IRQ_BOARD_START + 2) +#define IRQ_MAGICIAN_AC (IRQ_BOARD_START + 3) + +/* + * CPLD EGPIOs + */ + +#define MAGICIAN_EGPIO_BASE 0x80 /* GPIO_BOARD_START */ +#define MAGICIAN_EGPIO(reg,bit) \ + (MAGICIAN_EGPIO_BASE + 8*reg + bit) + +/* output */ + +#define EGPIO_MAGICIAN_TOPPOLY_POWER MAGICIAN_EGPIO(0, 2) +#define EGPIO_MAGICIAN_LED_POWER MAGICIAN_EGPIO(0, 5) +#define EGPIO_MAGICIAN_GSM_RESET MAGICIAN_EGPIO(0, 6) +#define EGPIO_MAGICIAN_LCD_POWER MAGICIAN_EGPIO(0, 7) +#define EGPIO_MAGICIAN_SPK_POWER MAGICIAN_EGPIO(1, 0) +#define EGPIO_MAGICIAN_EP_POWER MAGICIAN_EGPIO(1, 1) +#define EGPIO_MAGICIAN_IN_SEL0 MAGICIAN_EGPIO(1, 2) +#define EGPIO_MAGICIAN_IN_SEL1 MAGICIAN_EGPIO(1, 3) +#define EGPIO_MAGICIAN_MIC_POWER MAGICIAN_EGPIO(1, 4) +#define EGPIO_MAGICIAN_CODEC_RESET MAGICIAN_EGPIO(1, 5) +#define EGPIO_MAGICIAN_CODEC_POWER MAGICIAN_EGPIO(1, 6) +#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7) +#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0) +#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1) +#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) +#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) +#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) +#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5) +#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) + +/* input */ + +#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0) +#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1) + +#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0) +#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1) +#define EGPIO_MAGICIAN_BOARD_ID2 MAGICIAN_EGPIO(5, 2) +#define EGPIO_MAGICIAN_LCD_SELECT MAGICIAN_EGPIO(5, 3) +#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4) + +#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1) #endif /* _MAGICIAN_H_ */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa25x.h b/include/asm-arm/arch-pxa/mfp-pxa25x.h new file mode 100644 index 00000000000..0499323010b --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp-pxa25x.h @@ -0,0 +1,161 @@ +#ifndef __ASM_ARCH_MFP_PXA25X_H +#define __ASM_ARCH_MFP_PXA25X_H + +#include <asm/arch/mfp.h> +#include <asm/arch/mfp-pxa2xx.h> + +/* GPIO */ +#define GPIO2_GPIO MFP_CFG_IN(GPIO2, AF0) +#define GPIO3_GPIO MFP_CFG_IN(GPIO3, AF0) +#define GPIO4_GPIO MFP_CFG_IN(GPIO4, AF0) +#define GPIO5_GPIO MFP_CFG_IN(GPIO5, AF0) +#define GPIO6_GPIO MFP_CFG_IN(GPIO6, AF0) +#define GPIO7_GPIO MFP_CFG_IN(GPIO7, AF0) +#define GPIO8_GPIO MFP_CFG_IN(GPIO8, AF0) + +#define GPIO1_RST MFP_CFG_IN(GPIO1, AF1) + +/* Crystal and Clock Signals */ +#define GPIO10_RTCCLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW) +#define GPIO70_RTC_CLK MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW) +#define GPIO7_48MHz MFP_CFG_OUT(GPIO7, AF1, DRIVE_LOW) +#define GPIO11_3_6MHz MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW) +#define GPIO71_3_6MHz MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW) +#define GPIO12_32KHz MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW) +#define GPIO72_32kHz MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW) + +/* SDRAM and Static Memory I/O Signals */ +#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH) +#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH) +#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH) +#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH) +#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH) + +/* Miscellaneous I/O and DMA Signals */ +#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1) +#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1) +#define GPIO19_DREQ_1 MFP_CFG_IN(GPIO19, AF1) + +/* Alternate Bus Master Mode I/O Signals */ +#define GPIO13_MBGNT MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW) +#define GPIO73_MBGNT MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW) +#define GPIO14_MBREQ MFP_CFG_IN(GPIO14, AF1) +#define GPIO66_MBREQ MFP_CFG_IN(GPIO66, AF1) + +/* PC CARD */ +#define GPIO52_nPCE_1 MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH) +#define GPIO53_nPCE_2 MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH) +#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH) +#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH) +#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH) +#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH) +#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH) +#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1) +#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1) +#define GPIO54_nPSKTSEL MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH) + +/* FFUART */ +#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1) +#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1) +#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1) +#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1) +#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1) +#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH) +#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH) +#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH) + +/* BTUART */ +#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1) +#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH) +#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1) +#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH) + +/* STUART */ +#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2) +#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH) + +/* HWUART */ +#define GPIO42_HWUART_RXD MFP_CFG_IN(GPIO42, AF3) +#define GPIO43_HWUART_TXD MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH) +#define GPIO44_HWUART_CTS MFP_CFG_IN(GPIO44, AF3) +#define GPIO45_HWUART_RTS MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH) +#define GPIO48_HWUART_TXD MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH) +#define GPIO49_HWUART_RXD MFP_CFG_IN(GPIO49, AF1) +#define GPIO50_HWUART_CTS MFP_CFG_IN(GPIO50, AF1) +#define GPIO51_HWUART_RTS MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH) + +/* FICP */ +#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1) +#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH) + +/* PWM 0/1 */ +#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW) +#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW) + +/* AC97 */ +#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1) +#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1) +#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW) +#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW) +#define GPIO32_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO32, AF1) + +/* I2S */ +#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2) +#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW) +#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2) +#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW) +#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW) +#define GPIO32_I2S_SYSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW) + +/* SSP 1 */ +#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW) +#define GPIO24_SSP1_SFRM MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW) +#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW) +#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1) +#define GPIO27_SSP1_EXTCLK MFP_CFG_IN(GPIO27, AF1) + +/* SSP 2 - NSSP */ +#define GPIO81_SSP2_CLK_OUT MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW) +#define GPIO81_SSP2_CLK_IN MFP_CFG_IN(GPIO81, AF1) +#define GPIO82_SSP2_FRM_OUT MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW) +#define GPIO82_SSP2_FRM_IN MFP_CFG_IN(GPIO82, AF1) +#define GPIO83_SSP2_TXD MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW) +#define GPIO83_SSP2_RXD MFP_CFG_IN(GPIO83, AF2) +#define GPIO84_SSP2_TXD MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW) +#define GPIO84_SSP2_RXD MFP_CFG_IN(GPIO84, AF2) + +/* MMC */ +#define GPIO6_MMC_CLK MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW) +#define GPIO8_MMC_CS0 MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW) +#define GPIO9_MMC_CS1 MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW) +#define GPIO34_MMC_CS0 MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW) +#define GPIO39_MMC_CS1 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW) +#define GPIO53_MMC_CLK MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW) +#define GPIO54_MMC_CLK MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW) +#define GPIO69_MMC_CLK MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW) +#define GPIO67_MMC_CS0 MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW) +#define GPIO68_MMC_CS1 MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW) + +/* LCD */ +#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW) +#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW) +#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW) +#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW) +#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW) +#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW) +#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW) +#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW) +#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW) +#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW) +#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW) +#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW) +#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW) +#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW) +#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW) +#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW) +#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW) +#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW) +#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW) +#define GPIO77_LCD_ACBIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW) + +#endif /* __ASM_ARCH_MFP_PXA25X_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h new file mode 100644 index 00000000000..eb6eaa174f8 --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp-pxa27x.h @@ -0,0 +1,432 @@ +#ifndef __ASM_ARCH_MFP_PXA27X_H +#define __ASM_ARCH_MFP_PXA27X_H + +/* + * NOTE: for those special-function bidirectional GPIOs, as described + * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input + * alternative is preserved, the direction is actually selected by the + * specific controller, and this should work in most cases. + */ + +#include <asm/arch/mfp.h> +#include <asm/arch/mfp-pxa2xx.h> + +/* GPIO */ +#define GPIO85_GPIO MFP_CFG_IN(GPIO85, AF0) +#define GPIO86_GPIO MFP_CFG_IN(GPIO86, AF0) +#define GPIO87_GPIO MFP_CFG_IN(GPIO87, AF0) +#define GPIO88_GPIO MFP_CFG_IN(GPIO88, AF0) +#define GPIO89_GPIO MFP_CFG_IN(GPIO89, AF0) +#define GPIO90_GPIO MFP_CFG_IN(GPIO90, AF0) +#define GPIO91_GPIO MFP_CFG_IN(GPIO91, AF0) +#define GPIO92_GPIO MFP_CFG_IN(GPIO92, AF0) +#define GPIO93_GPIO MFP_CFG_IN(GPIO93, AF0) +#define GPIO94_GPIO MFP_CFG_IN(GPIO94, AF0) +#define GPIO95_GPIO MFP_CFG_IN(GPIO95, AF0) +#define GPIO96_GPIO MFP_CFG_IN(GPIO96, AF0) +#define GPIO97_GPIO MFP_CFG_IN(GPIO97, AF0) +#define GPIO98_GPIO MFP_CFG_IN(GPIO98, AF0) +#define GPIO99_GPIO MFP_CFG_IN(GPIO99, AF0) +#define GPIO100_GPIO MFP_CFG_IN(GPIO100, AF0) +#define GPIO101_GPIO MFP_CFG_IN(GPIO101, AF0) +#define GPIO102_GPIO MFP_CFG_IN(GPIO102, AF0) +#define GPIO103_GPIO MFP_CFG_IN(GPIO103, AF0) +#define GPIO104_GPIO MFP_CFG_IN(GPIO104, AF0) +#define GPIO105_GPIO MFP_CFG_IN(GPIO105, AF0) +#define GPIO106_GPIO MFP_CFG_IN(GPIO106, AF0) +#define GPIO107_GPIO MFP_CFG_IN(GPIO107, AF0) +#define GPIO108_GPIO MFP_CFG_IN(GPIO108, AF0) +#define GPIO109_GPIO MFP_CFG_IN(GPIO109, AF0) +#define GPIO110_GPIO MFP_CFG_IN(GPIO110, AF0) +#define GPIO111_GPIO MFP_CFG_IN(GPIO111, AF0) +#define GPIO112_GPIO MFP_CFG_IN(GPIO112, AF0) +#define GPIO113_GPIO MFP_CFG_IN(GPIO113, AF0) +#define GPIO114_GPIO MFP_CFG_IN(GPIO114, AF0) +#define GPIO115_GPIO MFP_CFG_IN(GPIO115, AF0) +#define GPIO116_GPIO MFP_CFG_IN(GPIO116, AF0) +#define GPIO117_GPIO MFP_CFG_IN(GPIO117, AF0) +#define GPIO118_GPIO MFP_CFG_IN(GPIO118, AF0) +#define GPIO119_GPIO MFP_CFG_IN(GPIO119, AF0) +#define GPIO120_GPIO MFP_CFG_IN(GPIO120, AF0) + +/* Crystal and Clock Signals */ +#define GPIO9_HZ_CLK MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW) +#define GPIO10_HZ_CLK MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW) +#define GPIO11_48_MHz MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW) +#define GPIO12_48_MHz MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW) +#define GPIO13_CLK_EXT MFP_CFG_IN(GPIO13, AF1) + +/* OS Timer Signals */ +#define GPIO11_EXT_SYNC_0 MFP_CFG_IN(GPIO11, AF1) +#define GPIO12_EXT_SYNC_1 MFP_CFG_IN(GPIO12, AF1) +#define GPIO9_CHOUT_0 MFP_CFG_OUT(GPIO9, AF3, DRIVE_LOW) +#define GPIO10_CHOUT_1 MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW) +#define GPIO11_CHOUT_0 MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW) +#define GPIO12_CHOUT_1 MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW) + +/* SDRAM and Static Memory I/O Signals */ +#define GPIO20_nSDCS_2 MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH) +#define GPIO21_nSDCS_3 MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH) +#define GPIO15_nCS_1 MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH) +#define GPIO78_nCS_2 MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH) +#define GPIO79_nCS_3 MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH) +#define GPIO80_nCS_4 MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH) +#define GPIO33_nCS_5 MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH) + +/* Miscellaneous I/O and DMA Signals */ +#define GPIO21_DVAL_0 MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH) +#define GPIO116_DVAL_0 MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH) +#define GPIO33_DVAL_1 MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH) +#define GPIO96_DVAL_1 MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH) +#define GPIO18_RDY MFP_CFG_IN(GPIO18, AF1) +#define GPIO20_DREQ_0 MFP_CFG_IN(GPIO20, AF1) +#define GPIO115_DREQ_0 MFP_CFG_IN(GPIO115, AF1) +#define GPIO80_DREQ_1 MFP_CFG_IN(GPIO80, AF1) +#define GPIO97_DREQ_1 MFP_CFG_IN(GPIO97, AF2) +#define GPIO85_DREQ_2 MFP_CFG_IN(GPIO85, AF2) +#define GPIO100_DREQ_2 MFP_CFG_IN(GPIO100, AF2) + +/* Alternate Bus Master Mode I/O Signals */ +#define GPIO20_MBREQ MFP_CFG_IN(GPIO20, AF2) +#define GPIO80_MBREQ MFP_CFG_IN(GPIO80, AF2) +#define GPIO96_MBREQ MFP_CFG_IN(GPIO96, AF2) +#define GPIO115_MBREQ MFP_CFG_IN(GPIO115, AF3) +#define GPIO21_MBGNT MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW) +#define GPIO33_MBGNT MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW) +#define GPIO97_MBGNT MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW) +#define GPIO116_MBGNT MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW) + +/* PC CARD */ +#define GPIO15_nPCE_1 MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH) +#define GPIO85_nPCE_1 MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH) +#define GPIO86_nPCE_1 MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH) +#define GPIO102_nPCE_1 MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH) +#define GPIO54_nPCE_2 MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH) +#define GPIO78_nPCE_2 MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH) +#define GPIO87_nPCE_2 MFP_CFG_IN(GPIO87, AF1) +#define GPIO55_nPREG MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH) +#define GPIO50_nPIOR MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH) +#define GPIO51_nPIOW MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH) +#define GPIO49_nPWE MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH) +#define GPIO48_nPOE MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH) +#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1) +#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1) +#define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH) + +/* I2C */ +#define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1) +#define GPIO118_I2C_SDA MFP_CFG_IN(GPIO118, AF1) + +/* FFUART */ +#define GPIO9_FFUART_CTS MFP_CFG_IN(GPIO9, AF3) +#define GPIO26_FFUART_CTS MFP_CFG_IN(GPIO26, AF3) +#define GPIO35_FFUART_CTS MFP_CFG_IN(GPIO35, AF1) +#define GPIO100_FFUART_CTS MFP_CFG_IN(GPIO100, AF3) +#define GPIO10_FFUART_DCD MFP_CFG_IN(GPIO10, AF1) +#define GPIO36_FFUART_DCD MFP_CFG_IN(GPIO36, AF1) +#define GPIO33_FFUART_DSR MFP_CFG_IN(GPIO33, AF2) +#define GPIO37_FFUART_DSR MFP_CFG_IN(GPIO37, AF1) +#define GPIO38_FFUART_RI MFP_CFG_IN(GPIO38, AF1) +#define GPIO89_FFUART_RI MFP_CFG_IN(GPIO89, AF3) +#define GPIO19_FFUART_RXD MFP_CFG_IN(GPIO19, AF3) +#define GPIO33_FFUART_RXD MFP_CFG_IN(GPIO33, AF1) +#define GPIO34_FFUART_RXD MFP_CFG_IN(GPIO34, AF1) +#define GPIO41_FFUART_RXD MFP_CFG_IN(GPIO41, AF1) +#define GPIO53_FFUART_RXD MFP_CFG_IN(GPIO53, AF1) +#define GPIO85_FFUART_RXD MFP_CFG_IN(GPIO85, AF1) +#define GPIO96_FFUART_RXD MFP_CFG_IN(GPIO96, AF3) +#define GPIO102_FFUART_RXD MFP_CFG_IN(GPIO102, AF3) +#define GPIO16_FFUART_TXD MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH) +#define GPIO37_FFUART_TXD MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH) +#define GPIO39_FFUART_TXD MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH) +#define GPIO83_FFUART_TXD MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH) +#define GPIO99_FFUART_TXD MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH) +#define GPIO27_FFUART_RTS MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH) +#define GPIO41_FFUART_RTS MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH) +#define GPIO83_FFUART_RTS MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH) +#define GPIO98_FFUART_RTS MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH) +#define GPIO40_FFUART_DTR MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH) +#define GPIO82_FFUART_DTR MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH) + +/* BTUART */ +#define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1) +#define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1) +#define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH) +#define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH) + +/* STUART */ +#define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2) +#define GPIO47_STUART_TXD MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH) + +/* FICP */ +#define GPIO42_FICP_RXD MFP_CFG_IN(GPIO42, AF2) +#define GPIO46_FICP_RXD MFP_CFG_IN(GPIO46, AF1) +#define GPIO43_FICP_TXD MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH) +#define GPIO47_FICP_TXD MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH) + +/* PWM 0/1/2/3 */ +#define GPIO11_PWM2_OUT MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW) +#define GPIO12_PWM3_OUT MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW) +#define GPIO16_PWM0_OUT MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW) +#define GPIO17_PWM1_OUT MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW) +#define GPIO38_PWM1_OUT MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW) +#define GPIO46_PWM2_OUT MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW) +#define GPIO47_PWM3_OUT MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW) +#define GPIO79_PWM2_OUT MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW) +#define GPIO80_PWM3_OUT MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW) +#define GPIO115_PWM1_OUT MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW) + +/* AC97 */ +#define GPIO31_AC97_SYNC MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW) +#define GPIO94_AC97_SYNC MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW) +#define GPIO30_AC97_SDATA_OUT MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW) +#define GPIO93_AC97_SDATA_OUT MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW) +#define GPIO45_AC97_SYSCLK MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW) +#define GPIO89_AC97_SYSCLK MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW) +#define GPIO98_AC97_SYSCLK MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW) +#define GPIO95_AC97_nRESET MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW) +#define GPIO113_AC97_nRESET MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW) +#define GPIO28_AC97_BITCLK MFP_CFG_IN(GPIO28, AF1) +#define GPIO29_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO29, AF1) +#define GPIO116_AC97_SDATA_IN_0 MFP_CFG_IN(GPIO116, AF2) +#define GPIO99_AC97_SDATA_IN_1 MFP_CFG_IN(GPIO99, AF2) + +/* I2S */ +#define GPIO28_I2S_BITCLK_IN MFP_CFG_IN(GPIO28, AF2) +#define GPIO28_I2S_BITCLK_OUT MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW) +#define GPIO29_I2S_SDATA_IN MFP_CFG_IN(GPIO29, AF2) +#define GPIO30_I2S_SDATA_OUT MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW) +#define GPIO31_I2S_SYNC MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW) +#define GPIO113_I2S_SYSCLK MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW) + +/* SSP 1 */ +#define GPIO23_SSP1_SCLK MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW) +#define GPIO29_SSP1_SCLK MFP_CFG_IN(GPIO29, AF3) +#define GPIO27_SSP1_SYSCLK MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW) +#define GPIO53_SSP1_SYSCLK MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW) +#define GPIO24_SSP1_SFRM MFP_CFG_IN(GPIO24, AF2) +#define GPIO28_SSP1_SFRM MFP_CFG_IN(GPIO28, AF3) +#define GPIO25_SSP1_TXD MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW) +#define GPIO57_SSP1_TXD MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW) +#define GPIO26_SSP1_RXD MFP_CFG_IN(GPIO26, AF1) +#define GPIO27_SSP1_SCLKEN MFP_CFG_IN(GPIO27, AF2) + +/* SSP 2 */ +#define GPIO19_SSP2_SCLK MFP_CFG_IN(GPIO19, AF1) +#define GPIO22_SSP2_SCLK MFP_CFG_IN(GPIO22, AF3) +#define GPIO29_SSP2_SCLK MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW) +#define GPIO36_SSP2_SCLK MFP_CFG_IN(GPIO36, AF2) +#define GPIO50_SSP2_SCLK MFP_CFG_IN(GPIO50, AF3) +#define GPIO22_SSP2_SYSCLK MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW) +#define GPIO14_SSP2_SFRM MFP_CFG_IN(GPIO14, AF2) +#define GPIO37_SSP2_SFRM MFP_CFG_IN(GPIO37, AF2) +#define GPIO87_SSP2_SFRM MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW) +#define GPIO88_SSP2_SFRM MFP_CFG_IN(GPIO88, AF3) +#define GPIO13_SSP2_TXD MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW) +#define GPIO38_SSP2_TXD MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW) +#define GPIO87_SSP2_TXD MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW) +#define GPIO89_SSP2_TXD MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW) +#define GPIO11_SSP2_RXD MFP_CFG_IN(GPIO11, AF2) +#define GPIO29_SSP2_RXD MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW) +#define GPIO40_SSP2_RXD MFP_CFG_IN(GPIO40, AF1) +#define GPIO86_SSP2_RXD MFP_CFG_IN(GPIO86, AF1) +#define GPIO88_SSP2_RXD MFP_CFG_IN(GPIO88, AF2) +#define GPIO22_SSP2_EXTCLK MFP_CFG_IN(GPIO22, AF1) +#define GPIO27_SSP2_EXTCLK MFP_CFG_IN(GPIO27, AF1) +#define GPIO22_SSP2_SCLKEN MFP_CFG_IN(GPIO22, AF2) +#define GPIO23_SSP2_SCLKEN MFP_CFG_IN(GPIO23, AF2) + +/* SSP 3 */ +#define GPIO34_SSP3_SCLK MFP_CFG_IN(GPIO34, AF3) +#define GPIO40_SSP3_SCLK MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW) +#define GPIO52_SSP3_SCLK MFP_CFG_IN(GPIO52, AF2) +#define GPIO84_SSP3_SCLK MFP_CFG_IN(GPIO84, AF1) +#define GPIO45_SSP3_SYSCLK MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW) +#define GPIO35_SSP3_SFRM MFP_CFG_IN(GPIO35, AF3) +#define GPIO39_SSP3_SFRM MFP_CFG_IN(GPIO39, AF3) +#define GPIO83_SSP3_SFRM MFP_CFG_IN(GPIO83, AF1) +#define GPIO35_SSP3_TXD MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW) +#define GPIO38_SSP3_TXD MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW) +#define GPIO81_SSP3_TXD MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW) +#define GPIO41_SSP3_RXD MFP_CFG_IN(GPIO41, AF3) +#define GPIO82_SSP3_RXD MFP_CFG_IN(GPIO82, AF1) +#define GPIO89_SSP3_RXD MFP_CFG_IN(GPIO89, AF1) + +/* MMC */ +#define GPIO32_MMC_CLK MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW) +#define GPIO92_MMC_DAT_0 MFP_CFG_IN(GPIO92, AF1) +#define GPIO109_MMC_DAT_1 MFP_CFG_IN(GPIO109, AF1) +#define GPIO110_MMC_DAT_2 MFP_CFG_IN(GPIO110, AF1) +#define GPIO111_MMC_DAT_3 MFP_CFG_IN(GPIO111, AF1) +#define GPIO112_MMC_CMD MFP_CFG_IN(GPIO112, AF1) + +/* LCD */ +#define GPIO58_LCD_LDD_0 MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW) +#define GPIO59_LCD_LDD_1 MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW) +#define GPIO60_LCD_LDD_2 MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW) +#define GPIO61_LCD_LDD_3 MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW) +#define GPIO62_LCD_LDD_4 MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW) +#define GPIO63_LCD_LDD_5 MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW) +#define GPIO64_LCD_LDD_6 MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW) +#define GPIO65_LCD_LDD_7 MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW) +#define GPIO66_LCD_LDD_8 MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW) +#define GPIO67_LCD_LDD_9 MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW) +#define GPIO68_LCD_LDD_10 MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW) +#define GPIO69_LCD_LDD_11 MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW) +#define GPIO70_LCD_LDD_12 MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW) +#define GPIO71_LCD_LDD_13 MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW) +#define GPIO72_LCD_LDD_14 MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW) +#define GPIO73_LCD_LDD_15 MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW) +#define GPIO86_LCD_LDD_16 MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW) +#define GPIO87_LCD_LDD_17 MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW) +#define GPIO74_LCD_FCLK MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW) +#define GPIO75_LCD_LCLK MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW) +#define GPIO76_LCD_PCLK MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW) +#define GPIO77_LCD_BIAS MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW) +#define GPIO14_LCD_VSYNC MFP_CFG_IN(GPIO14, AF1) +#define GPIO19_LCD_CS MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW) + +/* Keypad */ +#define GPIO93_KP_DKIN_0 MFP_CFG_IN(GPIO93, AF1) +#define GPIO94_KP_DKIN_1 MFP_CFG_IN(GPIO94, AF1) +#define GPIO95_KP_DKIN_2 MFP_CFG_IN(GPIO95, AF1) +#define GPIO96_KP_DKIN_3 MFP_CFG_IN(GPIO96, AF1) +#define GPIO97_KP_DKIN_4 MFP_CFG_IN(GPIO97, AF1) +#define GPIO98_KP_DKIN_5 MFP_CFG_IN(GPIO98, AF1) +#define GPIO99_KP_DKIN_6 MFP_CFG_IN(GPIO99, AF1) +#define GPIO13_KP_KDIN_7 MFP_CFG_IN(GPIO13, AF2) +#define GPIO100_KP_MKIN_0 MFP_CFG_IN(GPIO100, AF1) +#define GPIO101_KP_MKIN_1 MFP_CFG_IN(GPIO101, AF1) +#define GPIO102_KP_MKIN_2 MFP_CFG_IN(GPIO102, AF1) +#define GPIO34_KP_MKIN_3 MFP_CFG_IN(GPIO34, AF2) +#define GPIO37_KP_MKIN_3 MFP_CFG_IN(GPIO37, AF3) +#define GPIO97_KP_MKIN_3 MFP_CFG_IN(GPIO97, AF3) +#define GPIO98_KP_MKIN_4 MFP_CFG_IN(GPIO98, AF3) +#define GPIO38_KP_MKIN_4 MFP_CFG_IN(GPIO38, AF2) +#define GPIO39_KP_MKIN_4 MFP_CFG_IN(GPIO39, AF1) +#define GPIO16_KP_MKIN_5 MFP_CFG_IN(GPIO16, AF1) +#define GPIO90_KP_MKIN_5 MFP_CFG_IN(GPIO90, AF1) +#define GPIO99_KP_MKIN_5 MFP_CFG_IN(GPIO99, AF3) +#define GPIO17_KP_MKIN_6 MFP_CFG_IN(GPIO17, AF1) +#define GPIO91_KP_MKIN_6 MFP_CFG_IN(GPIO91, AF1) +#define GPIO95_KP_MKIN_6 MFP_CFG_IN(GPIO95, AF3) +#define GPIO13_KP_MKIN_7 MFP_CFG_IN(GPIO13, AF3) +#define GPIO36_KP_MKIN_7 MFP_CFG_IN(GPIO36, AF3) +#define GPIO103_KP_MKOUT_0 MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH) +#define GPIO104_KP_MKOUT_1 MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH) +#define GPIO105_KP_MKOUT_2 MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH) +#define GPIO106_KP_MKOUT_3 MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH) +#define GPIO107_KP_MKOUT_4 MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH) +#define GPIO108_KP_MKOUT_5 MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH) +#define GPIO35_KP_MKOUT_6 MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH) +#define GPIO22_KP_MKOUT_7 MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH) +#define GPIO40_KP_MKOUT_6 MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH) +#define GPIO41_KP_MKOUT_7 MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH) +#define GPIO96_KP_MKOUT_6 MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH) + +/* USB P3 */ +#define GPIO10_USB_P3_5 MFP_CFG_IN(GPIO10, AF3) +#define GPIO11_USB_P3_1 MFP_CFG_IN(GPIO11, AF3) +#define GPIO30_USB_P3_2 MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW) +#define GPIO31_USB_P3_6 MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW) +#define GPIO56_USB_P3_4 MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW) +#define GPIO86_USB_P3_5 MFP_CFG_IN(GPIO86, AF3) +#define GPIO87_USB_P3_1 MFP_CFG_IN(GPIO87, AF3) +#define GPIO90_USB_P3_5 MFP_CFG_IN(GPIO90, AF2) +#define GPIO91_USB_P3_1 MFP_CFG_IN(GPIO91, AF2) +#define GPIO113_USB_P3_3 MFP_CFG_IN(GPIO113, AF3) + +/* USB P2 */ +#define GPIO34_USB_P2_2 MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW) +#define GPIO35_USB_P2_1 MFP_CFG_IN(GPIO35, AF2) +#define GPIO36_USB_P2_4 MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW) +#define GPIO37_USB_P2_8 MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW) +#define GPIO38_USB_P2_3 MFP_CFG_IN(GPIO38, AF3) +#define GPIO39_USB_P2_6 MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW) +#define GPIO40_USB_P2_5 MFP_CFG_IN(GPIO40, AF3) +#define GPIO41_USB_P2_7 MFP_CFG_IN(GPIO41, AF2) +#define GPIO53_USB_P2_3 MFP_CFG_IN(GPIO53, AF2) + +/* USB Host Port 1/2 */ +#define GPIO88_USBH1_PWR MFP_CFG_IN(GPIO88, AF1) +#define GPIO89_USBH1_PEN MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW) +#define GPIO119_USBH2_PWR MFP_CFG_IN(GPIO119, AF1) +#define GPIO120_USBH2_PEN MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW) + +/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */ +#define GPIO115_CIF_DD_3 MFP_CFG_IN(GPIO115, AF2) +#define GPIO116_CIF_DD_2 MFP_CFG_IN(GPIO116, AF1) +#define GPIO12_CIF_DD_7 MFP_CFG_IN(GPIO12, AF2) +#define GPIO17_CIF_DD_6 MFP_CFG_IN(GPIO17, AF2) +#define GPIO23_CIF_MCLK MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW) +#define GPIO24_CIF_FV MFP_CFG_IN(GPIO24, AF1) +#define GPIO25_CIF_LV MFP_CFG_IN(GPIO25, AF1) +#define GPIO26_CIF_PCLK MFP_CFG_IN(GPIO26, AF2) +#define GPIO27_CIF_DD_0 MFP_CFG_IN(GPIO27, AF3) +#define GPIO42_CIF_MCLK MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW) +#define GPIO43_CIF_FV MFP_CFG_IN(GPIO43, AF3) +#define GPIO44_CIF_LV MFP_CFG_IN(GPIO44, AF3) +#define GPIO45_CIF_PCLK MFP_CFG_IN(GPIO45, AF3) +#define GPIO47_CIF_DD_0 MFP_CFG_IN(GPIO47, AF1) +#define GPIO48_CIF_DD_5 MFP_CFG_IN(GPIO48, AF1) +#define GPIO50_CIF_DD_3 MFP_CFG_IN(GPIO50, AF1) +#define GPIO51_CIF_DD_2 MFP_CFG_IN(GPIO51, AF1) +#define GPIO52_CIF_DD_4 MFP_CFG_IN(GPIO52, AF1) +#define GPIO53_CIF_MCLK MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW) +#define GPIO54_CIF_PCLK MFP_CFG_IN(GPIO54, AF3) +#define GPIO55_CIF_DD_1 MFP_CFG_IN(GPIO55, AF1) +#define GPIO81_CIF_DD_0 MFP_CFG_IN(GPIO81, AF2) +#define GPIO82_CIF_DD_5 MFP_CFG_IN(GPIO82, AF3) +#define GPIO83_CIF_DD_4 MFP_CFG_IN(GPIO83, AF3) +#define GPIO84_CIF_FV MFP_CFG_IN(GPIO84, AF3) +#define GPIO85_CIF_LV MFP_CFG_IN(GPIO85, AF3) +#define GPIO90_CIF_DD_4 MFP_CFG_IN(GPIO90, AF3) +#define GPIO91_CIF_DD_5 MFP_CFG_IN(GPIO91, AF3) +#define GPIO93_CIF_DD_6 MFP_CFG_IN(GPIO93, AF2) +#define GPIO94_CIF_DD_5 MFP_CFG_IN(GPIO94, AF2) +#define GPIO95_CIF_DD_4 MFP_CFG_IN(GPIO95, AF2) +#define GPIO98_CIF_DD_0 MFP_CFG_IN(GPIO98, AF2) +#define GPIO103_CIF_DD_3 MFP_CFG_IN(GPIO103, AF1) +#define GPIO104_CIF_DD_2 MFP_CFG_IN(GPIO104, AF1) +#define GPIO105_CIF_DD_1 MFP_CFG_IN(GPIO105, AF1) +#define GPIO106_CIF_DD_9 MFP_CFG_IN(GPIO106, AF1) +#define GPIO107_CIF_DD_8 MFP_CFG_IN(GPIO107, AF1) +#define GPIO108_CIF_DD_7 MFP_CFG_IN(GPIO108, AF1) +#define GPIO114_CIF_DD_1 MFP_CFG_IN(GPIO114, AF1) + +/* Universal Subscriber ID Interface */ +#define GPIO114_UVS0 MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW) +#define GPIO115_nUVS1 MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW) +#define GPIO116_nUVS2 MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW) +#define GPIO14_UCLK MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW) +#define GPIO91_UCLK MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW) +#define GPIO19_nURST MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW) +#define GPIO90_nURST MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW) +#define GPIO116_UDET MFP_CFG_IN(GPIO116, AF3) +#define GPIO114_UEN MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW) +#define GPIO115_UEN MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW) + +/* Mobile Scalable Link (MSL) Interface */ +#define GPIO81_BB_OB_DAT_0 MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW) +#define GPIO48_BB_OB_DAT_1 MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW) +#define GPIO50_BB_OB_DAT_2 MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW) +#define GPIO51_BB_OB_DAT_3 MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW) +#define GPIO52_BB_OB_CLK MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW) +#define GPIO53_BB_OB_STB MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW) +#define GPIO54_BB_OB_WAIT MFP_CFG_IN(GPIO54, AF2) +#define GPIO82_BB_IB_DAT_0 MFP_CFG_IN(GPIO82, AF2) +#define GPIO55_BB_IB_DAT_1 MFP_CFG_IN(GPIO55, AF2) +#define GPIO56_BB_IB_DAT_2 MFP_CFG_IN(GPIO56, AF2) +#define GPIO57_BB_IB_DAT_3 MFP_CFG_IN(GPIO57, AF2) +#define GPIO83_BB_IB_CLK MFP_CFG_IN(GPIO83, AF2) +#define GPIO84_BB_IB_STB MFP_CFG_IN(GPIO84, AF2) +#define GPIO85_BB_IB_WAIT MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW) + +/* Memory Stick Host Controller */ +#define GPIO92_MSBS MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW) +#define GPIO109_MSSDIO MFP_CFG_IN(GPIO109, AF2) +#define GPIO112_nMSINS MFP_CFG_IN(GPIO112, AF2) +#define GPIO32_MSSCLK MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW) + +extern int keypad_set_wake(unsigned int on); +#endif /* __ASM_ARCH_MFP_PXA27X_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa2xx.h b/include/asm-arm/arch-pxa/mfp-pxa2xx.h new file mode 100644 index 00000000000..db8d890d237 --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp-pxa2xx.h @@ -0,0 +1,132 @@ +#ifndef __ASM_ARCH_MFP_PXA2XX_H +#define __ASM_ARCH_MFP_PXA2XX_H + +#include <asm/arch/mfp.h> + +/* + * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx: + * + * MFP_PIN(x) + * MFP_AFx + * MFP_LPM_DRIVE_{LOW, HIGH} + * MFP_LPM_EDGE_x + * + * other MFP_x bit definitions will be ignored + * + * and adds the below two bits specifically for pxa2xx: + * + * bit 23 - Input/Output (PXA2xx specific) + * bit 24 - Wakeup Enable(PXA2xx specific) + */ + +#define MFP_DIR_IN (0x0 << 23) +#define MFP_DIR_OUT (0x1 << 23) +#define MFP_DIR_MASK (0x1 << 23) +#define MFP_DIR(x) (((x) >> 23) & 0x1) + +#define MFP_LPM_CAN_WAKEUP (0x1 << 24) +#define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE) +#define WAKEUP_ON_EDGE_FALL (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL) +#define WAKEUP_ON_EDGE_BOTH (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH) + +/* specifically for enabling wakeup on keypad GPIOs */ +#define WAKEUP_ON_LEVEL_HIGH (MFP_LPM_CAN_WAKEUP) + +#define MFP_CFG_IN(pin, af) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN)) + +/* NOTE: pins configured as output _must_ provide a low power state, + * and this state should help to minimize the power dissipation. + */ +#define MFP_CFG_OUT(pin, af, state) \ + ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\ + (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state)) + +/* Common configurations for pxa25x and pxa27x + * + * Note: pins configured as GPIO are always initialized to input + * so not to cause any side effect + */ +#define GPIO0_GPIO MFP_CFG_IN(GPIO0, AF0) +#define GPIO1_GPIO MFP_CFG_IN(GPIO1, AF0) +#define GPIO9_GPIO MFP_CFG_IN(GPIO9, AF0) +#define GPIO10_GPIO MFP_CFG_IN(GPIO10, AF0) +#define GPIO11_GPIO MFP_CFG_IN(GPIO11, AF0) +#define GPIO12_GPIO MFP_CFG_IN(GPIO12, AF0) +#define GPIO13_GPIO MFP_CFG_IN(GPIO13, AF0) +#define GPIO14_GPIO MFP_CFG_IN(GPIO14, AF0) +#define GPIO15_GPIO MFP_CFG_IN(GPIO15, AF0) +#define GPIO16_GPIO MFP_CFG_IN(GPIO16, AF0) +#define GPIO17_GPIO MFP_CFG_IN(GPIO17, AF0) +#define GPIO18_GPIO MFP_CFG_IN(GPIO18, AF0) +#define GPIO19_GPIO MFP_CFG_IN(GPIO19, AF0) +#define GPIO20_GPIO MFP_CFG_IN(GPIO20, AF0) +#define GPIO21_GPIO MFP_CFG_IN(GPIO21, AF0) +#define GPIO22_GPIO MFP_CFG_IN(GPIO22, AF0) +#define GPIO23_GPIO MFP_CFG_IN(GPIO23, AF0) +#define GPIO24_GPIO MFP_CFG_IN(GPIO24, AF0) +#define GPIO25_GPIO MFP_CFG_IN(GPIO25, AF0) +#define GPIO26_GPIO MFP_CFG_IN(GPIO26, AF0) +#define GPIO27_GPIO MFP_CFG_IN(GPIO27, AF0) +#define GPIO28_GPIO MFP_CFG_IN(GPIO28, AF0) +#define GPIO29_GPIO MFP_CFG_IN(GPIO29, AF0) +#define GPIO30_GPIO MFP_CFG_IN(GPIO30, AF0) +#define GPIO31_GPIO MFP_CFG_IN(GPIO31, AF0) +#define GPIO32_GPIO MFP_CFG_IN(GPIO32, AF0) +#define GPIO33_GPIO MFP_CFG_IN(GPIO33, AF0) +#define GPIO34_GPIO MFP_CFG_IN(GPIO34, AF0) +#define GPIO35_GPIO MFP_CFG_IN(GPIO35, AF0) +#define GPIO36_GPIO MFP_CFG_IN(GPIO36, AF0) +#define GPIO37_GPIO MFP_CFG_IN(GPIO37, AF0) +#define GPIO38_GPIO MFP_CFG_IN(GPIO38, AF0) +#define GPIO39_GPIO MFP_CFG_IN(GPIO39, AF0) +#define GPIO40_GPIO MFP_CFG_IN(GPIO40, AF0) +#define GPIO41_GPIO MFP_CFG_IN(GPIO41, AF0) +#define GPIO42_GPIO MFP_CFG_IN(GPIO42, AF0) +#define GPIO43_GPIO MFP_CFG_IN(GPIO43, AF0) +#define GPIO44_GPIO MFP_CFG_IN(GPIO44, AF0) +#define GPIO45_GPIO MFP_CFG_IN(GPIO45, AF0) +#define GPIO46_GPIO MFP_CFG_IN(GPIO46, AF0) +#define GPIO47_GPIO MFP_CFG_IN(GPIO47, AF0) +#define GPIO48_GPIO MFP_CFG_IN(GPIO48, AF0) +#define GPIO49_GPIO MFP_CFG_IN(GPIO49, AF0) +#define GPIO50_GPIO MFP_CFG_IN(GPIO50, AF0) +#define GPIO51_GPIO MFP_CFG_IN(GPIO51, AF0) +#define GPIO52_GPIO MFP_CFG_IN(GPIO52, AF0) +#define GPIO53_GPIO MFP_CFG_IN(GPIO53, AF0) +#define GPIO54_GPIO MFP_CFG_IN(GPIO54, AF0) +#define GPIO55_GPIO MFP_CFG_IN(GPIO55, AF0) +#define GPIO56_GPIO MFP_CFG_IN(GPIO56, AF0) +#define GPIO57_GPIO MFP_CFG_IN(GPIO57, AF0) +#define GPIO58_GPIO MFP_CFG_IN(GPIO58, AF0) +#define GPIO59_GPIO MFP_CFG_IN(GPIO59, AF0) +#define GPIO60_GPIO MFP_CFG_IN(GPIO60, AF0) +#define GPIO61_GPIO MFP_CFG_IN(GPIO61, AF0) +#define GPIO62_GPIO MFP_CFG_IN(GPIO62, AF0) +#define GPIO63_GPIO MFP_CFG_IN(GPIO63, AF0) +#define GPIO64_GPIO MFP_CFG_IN(GPIO64, AF0) +#define GPIO65_GPIO MFP_CFG_IN(GPIO65, AF0) +#define GPIO66_GPIO MFP_CFG_IN(GPIO66, AF0) +#define GPIO67_GPIO MFP_CFG_IN(GPIO67, AF0) +#define GPIO68_GPIO MFP_CFG_IN(GPIO68, AF0) +#define GPIO69_GPIO MFP_CFG_IN(GPIO69, AF0) +#define GPIO70_GPIO MFP_CFG_IN(GPIO70, AF0) +#define GPIO71_GPIO MFP_CFG_IN(GPIO71, AF0) +#define GPIO72_GPIO MFP_CFG_IN(GPIO72, AF0) +#define GPIO73_GPIO MFP_CFG_IN(GPIO73, AF0) +#define GPIO74_GPIO MFP_CFG_IN(GPIO74, AF0) +#define GPIO75_GPIO MFP_CFG_IN(GPIO75, AF0) +#define GPIO76_GPIO MFP_CFG_IN(GPIO76, AF0) +#define GPIO77_GPIO MFP_CFG_IN(GPIO77, AF0) +#define GPIO78_GPIO MFP_CFG_IN(GPIO78, AF0) +#define GPIO79_GPIO MFP_CFG_IN(GPIO79, AF0) +#define GPIO80_GPIO MFP_CFG_IN(GPIO80, AF0) +#define GPIO81_GPIO MFP_CFG_IN(GPIO81, AF0) +#define GPIO82_GPIO MFP_CFG_IN(GPIO82, AF0) +#define GPIO83_GPIO MFP_CFG_IN(GPIO83, AF0) +#define GPIO84_GPIO MFP_CFG_IN(GPIO84, AF0) + +extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num); +extern int gpio_set_wake(unsigned int gpio, unsigned int on); +#endif /* __ASM_ARCH_MFP_PXA2XX_H */ diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 2357a73340d..4b2ea1e95c5 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1129,6 +1129,11 @@ #define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ #define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ +#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ +#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ +#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ /* * General Purpose I/O @@ -1200,12 +1205,6 @@ /* Interrupt Controller */ -#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ -#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ -#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ - #define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) #define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) #define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) @@ -1237,267 +1236,6 @@ #endif - -/* GPIO alternate function assignments */ - -#define GPIO1_RST 1 /* reset */ -#define GPIO6_MMCCLK 6 /* MMC Clock */ -#define GPIO7_48MHz 7 /* 48 MHz clock output */ -#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ -#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ -#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ -#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ -#define GPIO12_32KHz 12 /* 32 kHz out */ -#define GPIO13_MBGNT 13 /* memory controller grant */ -#define GPIO14_MBREQ 14 /* alternate bus master request */ -#define GPIO15_nCS_1 15 /* chip select 1 */ -#define GPIO16_PWM0 16 /* PWM0 output */ -#define GPIO17_PWM1 17 /* PWM1 output */ -#define GPIO18_RDY 18 /* Ext. Bus Ready */ -#define GPIO19_DREQ1 19 /* External DMA Request */ -#define GPIO20_DREQ0 20 /* External DMA Request */ -#define GPIO23_SCLK 23 /* SSP clock */ -#define GPIO24_SFRM 24 /* SSP Frame */ -#define GPIO25_STXD 25 /* SSP transmit */ -#define GPIO26_SRXD 26 /* SSP receive */ -#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ -#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ -#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ -#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ -#define GPIO31_SYNC 31 /* AC97/I2S sync */ -#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ -#define GPIO32_SYSCLK 32 /* I2S System Clock */ -#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */ -#define GPIO33_nCS_5 33 /* chip select 5 */ -#define GPIO34_FFRXD 34 /* FFUART receive */ -#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ -#define GPIO35_FFCTS 35 /* FFUART Clear to send */ -#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ -#define GPIO37_FFDSR 37 /* FFUART data set ready */ -#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ -#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ -#define GPIO39_FFTXD 39 /* FFUART transmit data */ -#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ -#define GPIO41_FFRTS 41 /* FFUART request to send */ -#define GPIO42_BTRXD 42 /* BTUART receive data */ -#define GPIO42_HWRXD 42 /* HWUART receive data */ -#define GPIO43_BTTXD 43 /* BTUART transmit data */ -#define GPIO43_HWTXD 43 /* HWUART transmit data */ -#define GPIO44_BTCTS 44 /* BTUART clear to send */ -#define GPIO44_HWCTS 44 /* HWUART clear to send */ -#define GPIO45_BTRTS 45 /* BTUART request to send */ -#define GPIO45_HWRTS 45 /* HWUART request to send */ -#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ -#define GPIO46_ICPRXD 46 /* ICP receive data */ -#define GPIO46_STRXD 46 /* STD_UART receive data */ -#define GPIO47_ICPTXD 47 /* ICP transmit data */ -#define GPIO47_STTXD 47 /* STD_UART transmit data */ -#define GPIO48_nPOE 48 /* Output Enable for Card Space */ -#define GPIO49_nPWE 49 /* Write Enable for Card Space */ -#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ -#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ -#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ -#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ -#define GPIO53_MMCCLK 53 /* MMC Clock */ -#define GPIO54_MMCCLK 54 /* MMC Clock */ -#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ -#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27x) */ -#define GPIO55_nPREG 55 /* Card Address bit 26 */ -#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ -#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ -#define GPIO58_LDD_0 58 /* LCD data pin 0 */ -#define GPIO59_LDD_1 59 /* LCD data pin 1 */ -#define GPIO60_LDD_2 60 /* LCD data pin 2 */ -#define GPIO61_LDD_3 61 /* LCD data pin 3 */ -#define GPIO62_LDD_4 62 /* LCD data pin 4 */ -#define GPIO63_LDD_5 63 /* LCD data pin 5 */ -#define GPIO64_LDD_6 64 /* LCD data pin 6 */ -#define GPIO65_LDD_7 65 /* LCD data pin 7 */ -#define GPIO66_LDD_8 66 /* LCD data pin 8 */ -#define GPIO66_MBREQ 66 /* alternate bus master req */ -#define GPIO67_LDD_9 67 /* LCD data pin 9 */ -#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ -#define GPIO68_LDD_10 68 /* LCD data pin 10 */ -#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ -#define GPIO69_LDD_11 69 /* LCD data pin 11 */ -#define GPIO69_MMCCLK 69 /* MMC_CLK */ -#define GPIO70_LDD_12 70 /* LCD data pin 12 */ -#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ -#define GPIO71_LDD_13 71 /* LCD data pin 13 */ -#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ -#define GPIO72_LDD_14 72 /* LCD data pin 14 */ -#define GPIO72_32kHz 72 /* 32 kHz clock */ -#define GPIO73_LDD_15 73 /* LCD data pin 15 */ -#define GPIO73_MBGNT 73 /* Memory controller grant */ -#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ -#define GPIO75_LCD_LCLK 75 /* LCD line clock */ -#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ -#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ -#define GPIO78_nCS_2 78 /* chip select 2 */ -#define GPIO79_nCS_3 79 /* chip select 3 */ -#define GPIO80_nCS_4 80 /* chip select 4 */ -#define GPIO81_NSCLK 81 /* NSSP clock */ -#define GPIO82_NSFRM 82 /* NSSP Frame */ -#define GPIO83_NSTXD 83 /* NSSP transmit */ -#define GPIO84_NSRXD 84 /* NSSP receive */ -#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ -#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ -#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ -#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ -#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ -#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ -#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ -#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ -#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ -#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ -#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ - -/* GPIO alternate function mode & direction */ - -#define GPIO_IN 0x000 -#define GPIO_OUT 0x080 -#define GPIO_ALT_FN_1_IN 0x100 -#define GPIO_ALT_FN_1_OUT 0x180 -#define GPIO_ALT_FN_2_IN 0x200 -#define GPIO_ALT_FN_2_OUT 0x280 -#define GPIO_ALT_FN_3_IN 0x300 -#define GPIO_ALT_FN_3_OUT 0x380 -#define GPIO_MD_MASK_NR 0x07f -#define GPIO_MD_MASK_DIR 0x080 -#define GPIO_MD_MASK_FN 0x300 -#define GPIO_DFLT_LOW 0x400 -#define GPIO_DFLT_HIGH 0x800 - -#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) -#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) -#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT) -#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) -#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) -#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) -#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) -#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) -#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) -#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) -#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) -#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) -#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) -#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) -#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) -#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) -#define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT) -#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) -#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) -#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) -#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) -#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) -#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN) -#define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT) -#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) -#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) -#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) -#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) -#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) -#define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT) -#define GPIO32_MMCCLK_MD ( 32 | GPIO_ALT_FN_2_OUT) -#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) -#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) -#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) -#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) -#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) -#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) -#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) -#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) -#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) -#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) -#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) -#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) -#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) -#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) -#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) -#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) -#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) -#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) -#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) -#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) -#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) -#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) -#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) -#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) -#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) -#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) -#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) -#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) -#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) -#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) -#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) -#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) -#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) -#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) -#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) -#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) -#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) -#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) -#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) -#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) -#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) -#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) -#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) -#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) -#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) -#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) -#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) -#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) -#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) -#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) -#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) -#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) -#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) -#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) -#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) -#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) -#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) -#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) -#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) -#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) -#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) -#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) -#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) -#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) -#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) -#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) -#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) -#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) -#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) -#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) -#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) -#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) -#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) -#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) -#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) -#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) -#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) -#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) -#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) -#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) -#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) -#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) -#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) -#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) -#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) -#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN) -#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) - /* * Power Manager */ @@ -1668,260 +1406,8 @@ #define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ #define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ - -/* - * LCD - */ - -#define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */ -#define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */ -#define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */ -#define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */ -#define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 3 */ -#define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ -#define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ -#define LCSR __REG(0x44000038) /* LCD Controller Status Register */ -#define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */ -#define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */ -#define TMEDCR __REG(0x44000044) /* TMED Control Register */ - -#define LCCR3_1BPP (0 << 24) -#define LCCR3_2BPP (1 << 24) -#define LCCR3_4BPP (2 << 24) -#define LCCR3_8BPP (3 << 24) -#define LCCR3_16BPP (4 << 24) - -#define LCCR3_PDFOR_0 (0 << 30) -#define LCCR3_PDFOR_1 (1 << 30) -#define LCCR3_PDFOR_2 (2 << 30) -#define LCCR3_PDFOR_3 (3 << 30) - -#define LCCR4_PAL_FOR_0 (0 << 15) -#define LCCR4_PAL_FOR_1 (1 << 15) -#define LCCR4_PAL_FOR_2 (2 << 15) -#define LCCR4_PAL_FOR_MASK (3 << 15) - -#define FDADR0 __REG(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */ -#define FSADR0 __REG(0x44000204) /* DMA Channel 0 Frame Source Address Register */ -#define FIDR0 __REG(0x44000208) /* DMA Channel 0 Frame ID Register */ -#define LDCMD0 __REG(0x4400020C) /* DMA Channel 0 Command Register */ -#define FDADR1 __REG(0x44000210) /* DMA Channel 1 Frame Descriptor Address Register */ -#define FSADR1 __REG(0x44000214) /* DMA Channel 1 Frame Source Address Register */ -#define FIDR1 __REG(0x44000218) /* DMA Channel 1 Frame ID Register */ -#define LDCMD1 __REG(0x4400021C) /* DMA Channel 1 Command Register */ - -#define LCCR0_ENB (1 << 0) /* LCD Controller enable */ -#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */ -#define LCCR0_Color (LCCR0_CMS*0) /* Color display */ -#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ -#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display */ - /* Select */ -#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ -#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ - -#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */ -#define LCCR0_SFM (1 << 4) /* Start of frame mask */ -#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */ -#define LCCR0_EFM (1 << 6) /* End of Frame mask */ -#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */ -#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ -#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ -#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome */ - /* display mode) */ -#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */ - /* display */ -#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */ - /* display */ -#define LCCR0_DIS (1 << 10) /* LCD Disable */ -#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ -#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ -#define LCCR0_PDD_S 12 -#define LCCR0_BM (1 << 20) /* Branch mask */ -#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ -#define LCCR0_LCDT (1 << 22) /* LCD panel type */ -#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */ -#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */ -#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */ -#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */ - -#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ -#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ - (((Pixel) - 1) << FShft (LCCR1_PPL)) - -#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ -#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ - /* pulse Width [1..64 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_HSW)) - -#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ - /* count - 1 [Tpix] */ -#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ - /* [1..256 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_ELW)) - -#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ - /* Wait count - 1 [Tpix] */ -#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ - /* [1..256 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_BLW)) - - -#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ -#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ - (((Line) - 1) << FShft (LCCR2_LPP)) - -#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ - /* Width - 1 [Tln] (L_FCLK) */ -#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ - /* Width [1..64 Tln] */ \ - (((Tln) - 1) << FShft (LCCR2_VSW)) - -#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ - /* count [Tln] */ -#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ - /* [0..255 Tln] */ \ - ((Tln) << FShft (LCCR2_EFW)) - -#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ - /* Wait count [Tln] */ -#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ - /* [0..255 Tln] */ \ - ((Tln) << FShft (LCCR2_BFW)) - -#if 0 -#define LCCR3_PCD (0xff) /* Pixel clock divisor */ -#define LCCR3_ACB (0xff << 8) /* AC Bias pin frequency */ -#define LCCR3_ACB_S 8 -#endif - -#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */ -#define LCCR3_API_S 16 -#define LCCR3_VSP (1 << 20) /* vertical sync polarity */ -#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ -#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */ -#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */ -#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */ - -#define LCCR3_OEP (1 << 23) /* Output Enable Polarity (L_BIAS, */ - /* active display mode) */ -#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ -#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ - -#if 0 -#define LCCR3_BPP (7 << 24) /* bits per pixel */ -#define LCCR3_BPP_S 24 -#endif -#define LCCR3_DPC (1 << 27) /* double pixel clock mode */ - - -#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ -#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \ - (((Div) << FShft (LCCR3_PCD))) - - -#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ -#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \ - (((Bpp) << FShft (LCCR3_BPP))) - -#define LCCR3_ACB Fld (8, 8) /* AC Bias */ -#define LCCR3_Acb(Acb) /* BAC Bias */ \ - (((Acb) << FShft (LCCR3_ACB))) - -#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ - /* pulse active High */ -#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ - -#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ - /* active High */ -#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ - /* active Low */ - -#define LCSR_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR_SOF (1 << 1) /* Start of frame */ -#define LCSR_BER (1 << 2) /* Bus error */ -#define LCSR_ABC (1 << 3) /* AC Bias count */ -#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR_OU (1 << 6) /* output FIFO underrun */ -#define LCSR_QD (1 << 7) /* quick disable */ -#define LCSR_EOF (1 << 8) /* end of frame */ -#define LCSR_BS (1 << 9) /* branch status */ -#define LCSR_SINT (1 << 10) /* subsequent interrupt */ - -#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ - -#define LCSR_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR_SOF (1 << 1) /* Start of frame */ -#define LCSR_BER (1 << 2) /* Bus error */ -#define LCSR_ABC (1 << 3) /* AC Bias count */ -#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR_OU (1 << 6) /* output FIFO underrun */ -#define LCSR_QD (1 << 7) /* quick disable */ -#define LCSR_EOF (1 << 8) /* end of frame */ -#define LCSR_BS (1 << 9) /* branch status */ -#define LCSR_SINT (1 << 10) /* subsequent interrupt */ - -#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ - #ifdef CONFIG_PXA27x -/* - * Keypad - */ -#define KPC __REG(0x41500000) /* Keypad Interface Control register */ -#define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */ -#define KPREC __REG(0x41500010) /* Keypad Interface Rotary Encoder register */ -#define KPMK __REG(0x41500018) /* Keypad Interface Matrix Key register */ -#define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */ -#define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ -#define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ -#define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ -#define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ -#define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */ - -#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ -#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ -#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ -#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ -#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */ -#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */ -#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */ -#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */ -#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */ -#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */ -#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */ -#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */ -#define KPC_MS_ALL (KPC_MS0 | KPC_MS1 | KPC_MS2 | KPC_MS3 | KPC_MS4 | KPC_MS5 | KPC_MS6 | KPC_MS7) -#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ -#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ -#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Keypad Debounce Select */ -#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ -#define KPC_RE_ZERO_DEB (0x1 << 4) /* Rotary Encoder Zero Debounce */ -#define KPC_REE1 (0x1 << 3) /* Rotary Encoder1 Enable */ -#define KPC_REE0 (0x1 << 2) /* Rotary Encoder0 Enable */ -#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ -#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ - -#define KPDK_DKP (0x1 << 31) -#define KPDK_DK7 (0x1 << 7) -#define KPDK_DK6 (0x1 << 6) -#define KPDK_DK5 (0x1 << 5) -#define KPDK_DK4 (0x1 << 4) -#define KPDK_DK3 (0x1 << 3) -#define KPDK_DK2 (0x1 << 2) -#define KPDK_DK1 (0x1 << 1) -#define KPDK_DK0 (0x1 << 0) - -#define KPREC_OF1 (0x1 << 31) -#define kPREC_UF1 (0x1 << 30) -#define KPREC_OF0 (0x1 << 15) -#define KPREC_UF0 (0x1 << 14) - -#define KPMK_MKP (0x1 << 31) -#define KPAS_SO (0x1 << 31) -#define KPASMKPx_SO (0x1 << 31) - /* Camera Interface */ #define CICR0 __REG(0x50000000) #define CICR1 __REG(0x50000004) @@ -1953,7 +1439,7 @@ #define CICR0_FOM (1 << 0) /* FIFO-overrun mask */ #define CICR1_TBIT (1 << 31) /* Transparency bit */ -#define CICR1_RGBT_CONV (0x3 << 30) /* RGBT conversion mask */ +#define CICR1_RGBT_CONV (0x3 << 29) /* RGBT conversion mask */ #define CICR1_PPL (0x7ff << 15) /* Pixels per line mask */ #define CICR1_RGB_CONV (0x7 << 12) /* RGB conversion mask */ #define CICR1_RGB_F (1 << 11) /* RGB format */ diff --git a/include/asm-arm/arch-pxa/pxa27x_keypad.h b/include/asm-arm/arch-pxa/pxa27x_keypad.h index 644f7609b52..d5a48a96dea 100644 --- a/include/asm-arm/arch-pxa/pxa27x_keypad.h +++ b/include/asm-arm/arch-pxa/pxa27x_keypad.h @@ -53,4 +53,6 @@ struct pxa27x_keypad_platform_data { #define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val)) +extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); + #endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h new file mode 100644 index 00000000000..763313c5e6b --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h @@ -0,0 +1,357 @@ +#ifndef __ASM_ARCH_PXA2XX_GPIO_H +#define __ASM_ARCH_PXA2XX_GPIO_H + +/* GPIO alternate function assignments */ + +#define GPIO1_RST 1 /* reset */ +#define GPIO6_MMCCLK 6 /* MMC Clock */ +#define GPIO7_48MHz 7 /* 48 MHz clock output */ +#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ +#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ +#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ +#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ +#define GPIO12_32KHz 12 /* 32 kHz out */ +#define GPIO12_CIF_DD_7 12 /* Camera data pin 7 */ +#define GPIO13_MBGNT 13 /* memory controller grant */ +#define GPIO14_MBREQ 14 /* alternate bus master request */ +#define GPIO15_nCS_1 15 /* chip select 1 */ +#define GPIO16_PWM0 16 /* PWM0 output */ +#define GPIO17_PWM1 17 /* PWM1 output */ +#define GPIO17_CIF_DD_6 17 /* Camera data pin 6 */ +#define GPIO18_RDY 18 /* Ext. Bus Ready */ +#define GPIO19_DREQ1 19 /* External DMA Request */ +#define GPIO20_DREQ0 20 /* External DMA Request */ +#define GPIO23_SCLK 23 /* SSP clock */ +#define GPIO23_CIF_MCLK 23 /* Camera Master Clock */ +#define GPIO24_SFRM 24 /* SSP Frame */ +#define GPIO24_CIF_FV 24 /* Camera frame start signal */ +#define GPIO25_STXD 25 /* SSP transmit */ +#define GPIO25_CIF_LV 25 /* Camera line start signal */ +#define GPIO26_SRXD 26 /* SSP receive */ +#define GPIO26_CIF_PCLK 26 /* Camera Pixel Clock */ +#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ +#define GPIO27_CIF_DD_0 27 /* Camera data pin 0 */ +#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ +#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ +#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ +#define GPIO31_SYNC 31 /* AC97/I2S sync */ +#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ +#define GPIO32_SYSCLK 32 /* I2S System Clock */ +#define GPIO32_MMCCLK 32 /* MMC Clock (PXA270) */ +#define GPIO33_nCS_5 33 /* chip select 5 */ +#define GPIO34_FFRXD 34 /* FFUART receive */ +#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ +#define GPIO35_FFCTS 35 /* FFUART Clear to send */ +#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ +#define GPIO37_FFDSR 37 /* FFUART data set ready */ +#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ +#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ +#define GPIO39_FFTXD 39 /* FFUART transmit data */ +#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ +#define GPIO41_FFRTS 41 /* FFUART request to send */ +#define GPIO42_BTRXD 42 /* BTUART receive data */ +#define GPIO42_HWRXD 42 /* HWUART receive data */ +#define GPIO42_CIF_MCLK 42 /* Camera Master Clock */ +#define GPIO43_BTTXD 43 /* BTUART transmit data */ +#define GPIO43_HWTXD 43 /* HWUART transmit data */ +#define GPIO43_CIF_FV 43 /* Camera frame start signal */ +#define GPIO44_BTCTS 44 /* BTUART clear to send */ +#define GPIO44_HWCTS 44 /* HWUART clear to send */ +#define GPIO44_CIF_LV 44 /* Camera line start signal */ +#define GPIO45_BTRTS 45 /* BTUART request to send */ +#define GPIO45_HWRTS 45 /* HWUART request to send */ +#define GPIO45_AC97_SYSCLK 45 /* AC97 System Clock */ +#define GPIO45_CIF_PCLK 45 /* Camera Pixel Clock */ +#define GPIO46_ICPRXD 46 /* ICP receive data */ +#define GPIO46_STRXD 46 /* STD_UART receive data */ +#define GPIO47_ICPTXD 47 /* ICP transmit data */ +#define GPIO47_STTXD 47 /* STD_UART transmit data */ +#define GPIO47_CIF_DD_0 47 /* Camera data pin 0 */ +#define GPIO48_nPOE 48 /* Output Enable for Card Space */ +#define GPIO48_CIF_DD_5 48 /* Camera data pin 5 */ +#define GPIO49_nPWE 49 /* Write Enable for Card Space */ +#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ +#define GPIO50_CIF_DD_3 50 /* Camera data pin 3 */ +#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ +#define GPIO51_CIF_DD_2 51 /* Camera data pin 2 */ +#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ +#define GPIO52_CIF_DD_4 52 /* Camera data pin 4 */ +#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ +#define GPIO53_MMCCLK 53 /* MMC Clock */ +#define GPIO53_CIF_MCLK 53 /* Camera Master Clock */ +#define GPIO54_MMCCLK 54 /* MMC Clock */ +#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ +#define GPIO54_nPCE_2 54 /* Card Enable for Card Space (PXA27x) */ +#define GPIO54_CIF_PCLK 54 /* Camera Pixel Clock */ +#define GPIO55_nPREG 55 /* Card Address bit 26 */ +#define GPIO55_CIF_DD_1 55 /* Camera data pin 1 */ +#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ +#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ +#define GPIO58_LDD_0 58 /* LCD data pin 0 */ +#define GPIO59_LDD_1 59 /* LCD data pin 1 */ +#define GPIO60_LDD_2 60 /* LCD data pin 2 */ +#define GPIO61_LDD_3 61 /* LCD data pin 3 */ +#define GPIO62_LDD_4 62 /* LCD data pin 4 */ +#define GPIO63_LDD_5 63 /* LCD data pin 5 */ +#define GPIO64_LDD_6 64 /* LCD data pin 6 */ +#define GPIO65_LDD_7 65 /* LCD data pin 7 */ +#define GPIO66_LDD_8 66 /* LCD data pin 8 */ +#define GPIO66_MBREQ 66 /* alternate bus master req */ +#define GPIO67_LDD_9 67 /* LCD data pin 9 */ +#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ +#define GPIO68_LDD_10 68 /* LCD data pin 10 */ +#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ +#define GPIO69_LDD_11 69 /* LCD data pin 11 */ +#define GPIO69_MMCCLK 69 /* MMC_CLK */ +#define GPIO70_LDD_12 70 /* LCD data pin 12 */ +#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ +#define GPIO71_LDD_13 71 /* LCD data pin 13 */ +#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ +#define GPIO72_LDD_14 72 /* LCD data pin 14 */ +#define GPIO72_32kHz 72 /* 32 kHz clock */ +#define GPIO73_LDD_15 73 /* LCD data pin 15 */ +#define GPIO73_MBGNT 73 /* Memory controller grant */ +#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ +#define GPIO75_LCD_LCLK 75 /* LCD line clock */ +#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ +#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ +#define GPIO78_nCS_2 78 /* chip select 2 */ +#define GPIO79_nCS_3 79 /* chip select 3 */ +#define GPIO80_nCS_4 80 /* chip select 4 */ +#define GPIO81_NSCLK 81 /* NSSP clock */ +#define GPIO81_CIF_DD_0 81 /* Camera data pin 0 */ +#define GPIO82_NSFRM 82 /* NSSP Frame */ +#define GPIO82_CIF_DD_5 82 /* Camera data pin 5 */ +#define GPIO83_NSTXD 83 /* NSSP transmit */ +#define GPIO83_CIF_DD_4 83 /* Camera data pin 4 */ +#define GPIO84_NSRXD 84 /* NSSP receive */ +#define GPIO84_CIF_FV 84 /* Camera frame start signal */ +#define GPIO85_nPCE_1 85 /* Card Enable for Card Space (PXA27x) */ +#define GPIO85_CIF_LV 85 /* Camera line start signal */ +#define GPIO90_CIF_DD_4 90 /* Camera data pin 4 */ +#define GPIO91_CIF_DD_5 91 /* Camera data pin 5 */ +#define GPIO92_MMCDAT0 92 /* MMC DAT0 (PXA27x) */ +#define GPIO93_CIF_DD_6 93 /* Camera data pin 6 */ +#define GPIO94_CIF_DD_5 94 /* Camera data pin 5 */ +#define GPIO95_CIF_DD_4 95 /* Camera data pin 4 */ +#define GPIO98_CIF_DD_0 98 /* Camera data pin 0 */ +#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ +#define GPIO103_CIF_DD_3 103 /* Camera data pin 3 */ +#define GPIO104_CIF_DD_2 104 /* Camera data pin 2 */ +#define GPIO105_CIF_DD_1 105 /* Camera data pin 1 */ +#define GPIO106_CIF_DD_9 106 /* Camera data pin 9 */ +#define GPIO107_CIF_DD_8 107 /* Camera data pin 8 */ +#define GPIO108_CIF_DD_7 108 /* Camera data pin 7 */ +#define GPIO109_MMCDAT1 109 /* MMC DAT1 (PXA27x) */ +#define GPIO110_MMCDAT2 110 /* MMC DAT2 (PXA27x) */ +#define GPIO110_MMCCS0 110 /* MMC Chip Select 0 (PXA27x) */ +#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ +#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ +#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ +#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ +#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ +#define GPIO114_CIF_DD_1 114 /* Camera data pin 1 */ +#define GPIO115_CIF_DD_3 115 /* Camera data pin 3 */ +#define GPIO116_CIF_DD_2 116 /* Camera data pin 2 */ + +/* GPIO alternate function mode & direction */ + +#define GPIO_IN 0x000 +#define GPIO_OUT 0x080 +#define GPIO_ALT_FN_1_IN 0x100 +#define GPIO_ALT_FN_1_OUT 0x180 +#define GPIO_ALT_FN_2_IN 0x200 +#define GPIO_ALT_FN_2_OUT 0x280 +#define GPIO_ALT_FN_3_IN 0x300 +#define GPIO_ALT_FN_3_OUT 0x380 +#define GPIO_MD_MASK_NR 0x07f +#define GPIO_MD_MASK_DIR 0x080 +#define GPIO_MD_MASK_FN 0x300 +#define GPIO_DFLT_LOW 0x400 +#define GPIO_DFLT_HIGH 0x800 + +#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) +#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) +#define GPIO7_48MHz_MD ( 7 | GPIO_ALT_FN_1_OUT) +#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) +#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) +#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) +#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) +#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) +#define GPIO12_CIF_DD_7_MD (12 | GPIO_ALT_FN_2_IN) +#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) +#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) +#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) +#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) +#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) +#define GPIO17_CIF_DD_6_MD (17 | GPIO_ALT_FN_2_IN) +#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) +#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) +#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) +#define GPIO23_CIF_MCLK_MD (23 | GPIO_ALT_FN_1_OUT) +#define GPIO23_SCLK_MD (23 | GPIO_ALT_FN_2_OUT) +#define GPIO24_CIF_FV_MD (24 | GPIO_ALT_FN_1_OUT) +#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) +#define GPIO25_CIF_LV_MD (25 | GPIO_ALT_FN_1_OUT) +#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) +#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) +#define GPIO26_CIF_PCLK_MD (26 | GPIO_ALT_FN_2_IN) +#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) +#define GPIO27_CIF_DD_0_MD (27 | GPIO_ALT_FN_3_IN) +#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) +#define GPIO28_BITCLK_IN_I2S_MD (28 | GPIO_ALT_FN_2_IN) +#define GPIO28_BITCLK_OUT_I2S_MD (28 | GPIO_ALT_FN_1_OUT) +#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) +#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) +#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) +#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) +#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) +#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) +#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) +#define GPIO32_SYSCLK_I2S_MD (32 | GPIO_ALT_FN_1_OUT) +#define GPIO32_MMCCLK_MD (32 | GPIO_ALT_FN_2_OUT) +#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) +#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) +#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) +#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) +#define GPIO35_KP_MKOUT6_MD (35 | GPIO_ALT_FN_2_OUT) +#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) +#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) +#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) +#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) +#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) +#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) +#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) +#define GPIO41_KP_MKOUT7_MD (41 | GPIO_ALT_FN_1_OUT) +#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) +#define GPIO42_HWRXD_MD (42 | GPIO_ALT_FN_3_IN) +#define GPIO42_CIF_MCLK_MD (42 | GPIO_ALT_FN_3_OUT) +#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) +#define GPIO43_HWTXD_MD (43 | GPIO_ALT_FN_3_OUT) +#define GPIO43_CIF_FV_MD (43 | GPIO_ALT_FN_3_OUT) +#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) +#define GPIO44_HWCTS_MD (44 | GPIO_ALT_FN_3_IN) +#define GPIO44_CIF_LV_MD (44 | GPIO_ALT_FN_3_OUT) +#define GPIO45_CIF_PCLK_MD (45 | GPIO_ALT_FN_3_IN) +#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) +#define GPIO45_HWRTS_MD (45 | GPIO_ALT_FN_3_OUT) +#define GPIO45_SYSCLK_AC97_MD (45 | GPIO_ALT_FN_1_OUT) +#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) +#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) +#define GPIO47_CIF_DD_0_MD (47 | GPIO_ALT_FN_1_IN) +#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) +#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) +#define GPIO48_CIF_DD_5_MD (48 | GPIO_ALT_FN_1_IN) +#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) +#define GPIO48_HWTXD_MD (48 | GPIO_ALT_FN_1_OUT) +#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) +#define GPIO49_HWRXD_MD (49 | GPIO_ALT_FN_1_IN) +#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) +#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) +#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) +#define GPIO50_HWCTS_MD (50 | GPIO_ALT_FN_1_IN) +#define GPIO50_CIF_DD_3_MD (50 | GPIO_ALT_FN_1_IN) +#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) +#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) +#define GPIO51_HWRTS_MD (51 | GPIO_ALT_FN_1_OUT) +#define GPIO51_CIF_DD_2_MD (51 | GPIO_ALT_FN_1_IN) +#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) +#define GPIO52_CIF_DD_4_MD (52 | GPIO_ALT_FN_1_IN) +#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) +#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) +#define GPIO53_CIF_MCLK_MD (53 | GPIO_ALT_FN_2_OUT) +#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) +#define GPIO54_nPCE_2_MD (54 | GPIO_ALT_FN_2_OUT) +#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) +#define GPIO54_CIF_PCLK_MD (54 | GPIO_ALT_FN_3_IN) +#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) +#define GPIO55_CIF_DD_1_MD (55 | GPIO_ALT_FN_1_IN) +#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) +#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) +#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) +#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) +#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) +#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) +#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) +#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) +#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) +#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) +#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) +#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) +#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) +#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) +#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) +#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) +#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) +#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) +#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) +#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) +#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) +#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) +#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) +#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) +#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) +#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) +#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) +#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) +#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) +#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) +#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) +#define GPIO78_nPCE_2_MD (78 | GPIO_ALT_FN_1_OUT) +#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) +#define GPIO79_pSKTSEL_MD (79 | GPIO_ALT_FN_1_OUT) +#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) +#define GPIO81_NSSP_CLK_OUT (81 | GPIO_ALT_FN_1_OUT) +#define GPIO81_NSSP_CLK_IN (81 | GPIO_ALT_FN_1_IN) +#define GPIO81_CIF_DD_0_MD (81 | GPIO_ALT_FN_2_IN) +#define GPIO82_NSSP_FRM_OUT (82 | GPIO_ALT_FN_1_OUT) +#define GPIO82_NSSP_FRM_IN (82 | GPIO_ALT_FN_1_IN) +#define GPIO82_CIF_DD_5_MD (82 | GPIO_ALT_FN_3_IN) +#define GPIO83_NSSP_TX (83 | GPIO_ALT_FN_1_OUT) +#define GPIO83_NSSP_RX (83 | GPIO_ALT_FN_2_IN) +#define GPIO83_CIF_DD_4_MD (83 | GPIO_ALT_FN_3_IN) +#define GPIO84_NSSP_TX (84 | GPIO_ALT_FN_1_OUT) +#define GPIO84_NSSP_RX (84 | GPIO_ALT_FN_2_IN) +#define GPIO84_CIF_FV_MD (84 | GPIO_ALT_FN_3_IN) +#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) +#define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN) +#define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT) +#define GPIO90_CIF_DD_4_MD (90 | GPIO_ALT_FN_3_IN) +#define GPIO91_CIF_DD_5_MD (91 | GPIO_ALT_FN_3_IN) +#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) +#define GPIO93_CIF_DD_6_MD (93 | GPIO_ALT_FN_2_IN) +#define GPIO94_CIF_DD_5_MD (94 | GPIO_ALT_FN_2_IN) +#define GPIO95_CIF_DD_4_MD (95 | GPIO_ALT_FN_2_IN) +#define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN) +#define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN) +#define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN) +#define GPIO98_CIF_DD_0_MD (98 | GPIO_ALT_FN_2_IN) +#define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN) +#define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN) +#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) +#define GPIO102_KP_MKIN2_MD (102 | GPIO_ALT_FN_1_IN) +#define GPIO103_CIF_DD_3_MD (103 | GPIO_ALT_FN_1_IN) +#define GPIO103_KP_MKOUT0_MD (103 | GPIO_ALT_FN_2_OUT) +#define GPIO104_CIF_DD_2_MD (104 | GPIO_ALT_FN_1_IN) +#define GPIO104_pSKTSEL_MD (104 | GPIO_ALT_FN_1_OUT) +#define GPIO104_KP_MKOUT1_MD (104 | GPIO_ALT_FN_2_OUT) +#define GPIO105_CIF_DD_1_MD (105 | GPIO_ALT_FN_1_IN) +#define GPIO105_KP_MKOUT2_MD (105 | GPIO_ALT_FN_2_OUT) +#define GPIO106_CIF_DD_9_MD (106 | GPIO_ALT_FN_1_IN) +#define GPIO106_KP_MKOUT3_MD (106 | GPIO_ALT_FN_2_OUT) +#define GPIO107_CIF_DD_8_MD (107 | GPIO_ALT_FN_1_IN) +#define GPIO107_KP_MKOUT4_MD (107 | GPIO_ALT_FN_2_OUT) +#define GPIO108_CIF_DD_7_MD (108 | GPIO_ALT_FN_1_IN) +#define GPIO108_KP_MKOUT5_MD (108 | GPIO_ALT_FN_2_OUT) +#define GPIO109_MMCDAT1_MD (109 | GPIO_ALT_FN_1_OUT) +#define GPIO110_MMCDAT2_MD (110 | GPIO_ALT_FN_1_OUT) +#define GPIO110_MMCCS0_MD (110 | GPIO_ALT_FN_1_OUT) +#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) +#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) +#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) +#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) +#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) +#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_IN) +#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) + +#endif /* __ASM_ARCH_PXA2XX_GPIO_H */ diff --git a/include/asm-arm/arch-pxa/pxa3xx-regs.h b/include/asm-arm/arch-pxa/pxa3xx-regs.h index 8e1b3ead827..fe9364c83a2 100644 --- a/include/asm-arm/arch-pxa/pxa3xx-regs.h +++ b/include/asm-arm/arch-pxa/pxa3xx-regs.h @@ -12,6 +12,15 @@ #ifndef __ASM_ARCH_PXA3XX_REGS_H #define __ASM_ARCH_PXA3XX_REGS_H + +/* + * Oscillator Configuration Register (OSCC) + */ +#define OSCC __REG(0x41350000) /* Oscillator Configuration Register */ + +#define OSCC_PEN (1 << 11) /* 13MHz POUT */ + + /* * Service Power Management Unit (MPMU) */ diff --git a/include/asm-arm/arch-pxa/pxa3xx_nand.h b/include/asm-arm/arch-pxa/pxa3xx_nand.h new file mode 100644 index 00000000000..81a8937486c --- /dev/null +++ b/include/asm-arm/arch-pxa/pxa3xx_nand.h @@ -0,0 +1,18 @@ +#ifndef __ASM_ARCH_PXA3XX_NAND_H +#define __ASM_ARCH_PXA3XX_NAND_H + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +struct pxa3xx_nand_platform_data { + + /* the data flash bus is shared between the Static Memory + * Controller and the Data Flash Controller, the arbiter + * controls the ownership of the bus + */ + int enable_arbiter; + + struct mtd_partition *parts; + unsigned int nr_parts; +}; +#endif /* __ASM_ARCH_PXA3XX_NAND_H */ diff --git a/include/asm-arm/arch-pxa/pxafb.h b/include/asm-arm/arch-pxa/pxafb.h index ea2336aa70e..bbd22396841 100644 --- a/include/asm-arm/arch-pxa/pxafb.h +++ b/include/asm-arm/arch-pxa/pxafb.h @@ -13,6 +13,50 @@ */ #include <linux/fb.h> +#include <asm/arch/regs-lcd.h> + +/* + * Supported LCD connections + * + * bits 0 - 3: for LCD panel type: + * + * STN - for passive matrix + * DSTN - for dual scan passive matrix + * TFT - for active matrix + * + * bits 4 - 9 : for bus width + * bits 10-17 : for AC Bias Pin Frequency + * bit 18 : for output enable polarity + * bit 19 : for pixel clock edge + */ +#define LCD_CONN_TYPE(_x) ((_x) & 0x0f) +#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f) + +#define LCD_TYPE_UNKNOWN 0 +#define LCD_TYPE_MONO_STN 1 +#define LCD_TYPE_MONO_DSTN 2 +#define LCD_TYPE_COLOR_STN 3 +#define LCD_TYPE_COLOR_DSTN 4 +#define LCD_TYPE_COLOR_TFT 5 +#define LCD_TYPE_SMART_PANEL 6 +#define LCD_TYPE_MAX 7 + +#define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN) +#define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN) +#define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN) +#define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN) +#define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN) +#define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT) +#define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT) +#define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL) +#define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL) +#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL) + +#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10) +#define LCD_BIAS_ACTIVE_HIGH (0 << 17) +#define LCD_BIAS_ACTIVE_LOW (1 << 17) +#define LCD_PCLK_EDGE_RISE (0 << 18) +#define LCD_PCLK_EDGE_FALL (1 << 18) /* * This structure describes the machine which we are running on. @@ -26,6 +70,10 @@ struct pxafb_mode_info { u_short yres; u_char bpp; + u_int cmap_greyscale:1, + unused:31; + + /* Parallel Mode Timing */ u_char hsync_len; u_char left_margin; u_char right_margin; @@ -35,14 +83,28 @@ struct pxafb_mode_info { u_char lower_margin; u_char sync; - u_int cmap_greyscale:1, - unused:31; + /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details + * Note: + * 1. all parameters in nanosecond (ns) + * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits + * in pxa27x and pxa3xx, initialize them to the same value or + * the larger one will be used + * 3. same to {rd,wr}_pulse_width + */ + unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */ + unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */ + unsigned wr_pulse_width; /* L_PCLK_WR pulse width */ + unsigned rd_pulse_width; /* L_FCLK_RD pulse width */ + unsigned cmd_inh_time; /* Command Inhibit time between two writes */ + unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */ }; struct pxafb_mach_info { struct pxafb_mode_info *modes; unsigned int num_modes; + unsigned int lcd_conn; + u_int fixed_modes:1, cmap_inverse:1, cmap_static:1, @@ -78,8 +140,11 @@ struct pxafb_mach_info { u_int lccr4; void (*pxafb_backlight_power)(int); void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); - + void (*smart_update)(struct fb_info *); }; void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info); void set_pxa_fb_parent(struct device *parent_dev); unsigned long pxafb_get_hsync_time(struct device *dev); + +extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); +extern int pxafb_smart_flush(struct fb_info *info); diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h new file mode 100644 index 00000000000..f762493f514 --- /dev/null +++ b/include/asm-arm/arch-pxa/regs-lcd.h @@ -0,0 +1,171 @@ +#ifndef __ASM_ARCH_REGS_LCD_H +#define __ASM_ARCH_REGS_LCD_H +/* + * LCD Controller Registers and Bits Definitions + */ +#define LCCR0 (0x000) /* LCD Controller Control Register 0 */ +#define LCCR1 (0x004) /* LCD Controller Control Register 1 */ +#define LCCR2 (0x008) /* LCD Controller Control Register 2 */ +#define LCCR3 (0x00C) /* LCD Controller Control Register 3 */ +#define LCCR4 (0x010) /* LCD Controller Control Register 4 */ +#define LCCR5 (0x014) /* LCD Controller Control Register 5 */ +#define DFBR0 (0x020) /* DMA Channel 0 Frame Branch Register */ +#define DFBR1 (0x024) /* DMA Channel 1 Frame Branch Register */ +#define LCSR (0x038) /* LCD Controller Status Register */ +#define LIIDR (0x03C) /* LCD Controller Interrupt ID Register */ +#define TMEDRGBR (0x040) /* TMED RGB Seed Register */ +#define TMEDCR (0x044) /* TMED Control Register */ + +#define CMDCR (0x100) /* Command Control Register */ +#define PRSR (0x104) /* Panel Read Status Register */ + +#define LCCR3_1BPP (0 << 24) +#define LCCR3_2BPP (1 << 24) +#define LCCR3_4BPP (2 << 24) +#define LCCR3_8BPP (3 << 24) +#define LCCR3_16BPP (4 << 24) + +#define LCCR3_PDFOR_0 (0 << 30) +#define LCCR3_PDFOR_1 (1 << 30) +#define LCCR3_PDFOR_2 (2 << 30) +#define LCCR3_PDFOR_3 (3 << 30) + +#define LCCR4_PAL_FOR_0 (0 << 15) +#define LCCR4_PAL_FOR_1 (1 << 15) +#define LCCR4_PAL_FOR_2 (2 << 15) +#define LCCR4_PAL_FOR_MASK (3 << 15) + +#define FDADR0 (0x200) /* DMA Channel 0 Frame Descriptor Address Register */ +#define FSADR0 (0x204) /* DMA Channel 0 Frame Source Address Register */ +#define FIDR0 (0x208) /* DMA Channel 0 Frame ID Register */ +#define LDCMD0 (0x20C) /* DMA Channel 0 Command Register */ +#define FDADR1 (0x210) /* DMA Channel 1 Frame Descriptor Address Register */ +#define FSADR1 (0x214) /* DMA Channel 1 Frame Source Address Register */ +#define FIDR1 (0x218) /* DMA Channel 1 Frame ID Register */ +#define LDCMD1 (0x21C) /* DMA Channel 1 Command Register */ +#define FDADR6 (0x260) /* DMA Channel 6 Frame Descriptor Address Register */ +#define FSADR6 (0x264) /* DMA Channel 6 Frame Source Address Register */ +#define FIDR6 (0x268) /* DMA Channel 6 Frame ID Register */ + +#define LCCR0_ENB (1 << 0) /* LCD Controller enable */ +#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */ +#define LCCR0_Color (LCCR0_CMS*0) /* Color display */ +#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ +#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display Select */ +#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ +#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ + +#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */ +#define LCCR0_SFM (1 << 4) /* Start of frame mask */ +#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */ +#define LCCR0_EFM (1 << 6) /* End of Frame mask */ +#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */ +#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ +#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ +#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome) */ +#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome display */ +#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome display */ +#define LCCR0_DIS (1 << 10) /* LCD Disable */ +#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ +#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ +#define LCCR0_PDD_S 12 +#define LCCR0_BM (1 << 20) /* Branch mask */ +#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ +#define LCCR0_LCDT (1 << 22) /* LCD panel type */ +#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */ +#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */ +#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */ +#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */ + +#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ +#define LCCR1_DisWdth(Pixel) (((Pixel) - 1) << FShft (LCCR1_PPL)) + +#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ +#define LCCR1_HorSnchWdth(Tpix) (((Tpix) - 1) << FShft (LCCR1_HSW)) + +#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait - 1 */ +#define LCCR1_EndLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_ELW)) + +#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ +#define LCCR1_BegLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_BLW)) + +#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ +#define LCCR2_DisHght(Line) (((Line) - 1) << FShft (LCCR2_LPP)) + +#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse - 1 */ +#define LCCR2_VrtSnchWdth(Tln) (((Tln) - 1) << FShft (LCCR2_VSW)) + +#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ +#define LCCR2_EndFrmDel(Tln) ((Tln) << FShft (LCCR2_EFW)) + +#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ +#define LCCR2_BegFrmDel(Tln) ((Tln) << FShft (LCCR2_BFW)) + +#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */ +#define LCCR3_API_S 16 +#define LCCR3_VSP (1 << 20) /* vertical sync polarity */ +#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ +#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */ +#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */ +#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */ + +#define LCCR3_OEP (1 << 23) /* Output Enable Polarity */ +#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ +#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ + +#define LCCR3_DPC (1 << 27) /* double pixel clock mode */ +#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ +#define LCCR3_PixClkDiv(Div) (((Div) << FShft (LCCR3_PCD))) + +#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ +#define LCCR3_Bpp(Bpp) (((Bpp) << FShft (LCCR3_BPP))) + +#define LCCR3_ACB Fld (8, 8) /* AC Bias */ +#define LCCR3_Acb(Acb) (((Acb) << FShft (LCCR3_ACB))) + +#define LCCR3_HorSnchH (LCCR3_HSP*0) /* HSP Active High */ +#define LCCR3_HorSnchL (LCCR3_HSP*1) /* HSP Active Low */ + +#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* VSP Active High */ +#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* VSP Active Low */ + +#define LCCR5_IUM(x) (1 << ((x) + 23)) /* input underrun mask */ +#define LCCR5_BSM(x) (1 << ((x) + 15)) /* branch mask */ +#define LCCR5_EOFM(x) (1 << ((x) + 7)) /* end of frame mask */ +#define LCCR5_SOFM(x) (1 << ((x) + 0)) /* start of frame mask */ + +#define LCSR_LDD (1 << 0) /* LCD Disable Done */ +#define LCSR_SOF (1 << 1) /* Start of frame */ +#define LCSR_BER (1 << 2) /* Bus error */ +#define LCSR_ABC (1 << 3) /* AC Bias count */ +#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ +#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ +#define LCSR_OU (1 << 6) /* output FIFO underrun */ +#define LCSR_QD (1 << 7) /* quick disable */ +#define LCSR_EOF (1 << 8) /* end of frame */ +#define LCSR_BS (1 << 9) /* branch status */ +#define LCSR_SINT (1 << 10) /* subsequent interrupt */ +#define LCSR_RD_ST (1 << 11) /* read status */ +#define LCSR_CMD_INT (1 << 12) /* command interrupt */ + +#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ + +/* smartpanel related */ +#define PRSR_DATA(x) ((x) & 0xff) /* Panel Data */ +#define PRSR_A0 (1 << 8) /* Read Data Source */ +#define PRSR_ST_OK (1 << 9) /* Status OK */ +#define PRSR_CON_NT (1 << 10) /* Continue to Next Command */ + +#define SMART_CMD_A0 (0x1 << 8) +#define SMART_CMD_READ_STATUS_REG (0x0 << 9) +#define SMART_CMD_READ_FRAME_BUFFER ((0x0 << 9) | SMART_CMD_A0) +#define SMART_CMD_WRITE_COMMAND (0x1 << 9) +#define SMART_CMD_WRITE_DATA ((0x1 << 9) | SMART_CMD_A0) +#define SMART_CMD_WRITE_FRAME ((0x2 << 9) | SMART_CMD_A0) +#define SMART_CMD_WAIT_FOR_VSYNC (0x3 << 9) +#define SMART_CMD_NOOP (0x4 << 9) +#define SMART_CMD_INTERRUPT (0x5 << 9) + +#define SMART_CMD(x) (SMART_CMD_WRITE_COMMAND | ((x) & 0xff)) +#define SMART_DAT(x) (SMART_CMD_WRITE_DATA | ((x) & 0xff)) +#endif /* __ASM_ARCH_REGS_LCD_H */ diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h index 1d56a3ef89f..a758a719180 100644 --- a/include/asm-arm/arch-pxa/system.h +++ b/include/asm-arm/arch-pxa/system.h @@ -22,6 +22,8 @@ static inline void arch_idle(void) static inline void arch_reset(char mode) { + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + if (mode == 's') { /* Jump into ROM at address 0 */ cpu_reset(0); diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index c05e4faf85a..c5b6fde6907 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -23,11 +23,12 @@ /* * SCOOP2 internal GPIOs */ +#define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO #define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 #define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12 -#define TOSA_SCOOP_IR_POWERDWN SCOOP_GPCR_PA13 -#define TOSA_SCOOP_SD_WP SCOOP_GPCR_PA14 -#define TOSA_SCOOP_PWR_ON SCOOP_GPCR_PA15 +#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2) +#define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3) +#define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4) #define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16 #define TOSA_SCOOP_BT_RESET SCOOP_GPCR_PA17 #define TOSA_SCOOP_BT_PWR_EN SCOOP_GPCR_PA18 @@ -35,7 +36,7 @@ /* GPIO Direction 1 : output mode / 0:input mode */ #define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \ - TOSA_SCOOP_IR_POWERDWN | TOSA_SCOOP_PWR_ON | TOSA_SCOOP_AUD_PWR_ON |\ + TOSA_SCOOP_AUD_PWR_ON |\ TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN ) /* GPIO out put level when init 1: Hi */ #define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN ) @@ -43,23 +44,21 @@ /* * SCOOP2 jacket GPIOs */ -#define TOSA_SCOOP_JC_BT_LED SCOOP_GPCR_PA11 -#define TOSA_SCOOP_JC_NOTE_LED SCOOP_GPCR_PA12 -#define TOSA_SCOOP_JC_CHRG_ERR_LED SCOOP_GPCR_PA13 -#define TOSA_SCOOP_JC_USB_PULLUP SCOOP_GPCR_PA14 +#define TOSA_SCOOP_JC_GPIO_BASE (NR_BUILTIN_GPIO + 12) +#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0) +#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) +#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) +#define TOSA_GPIO_USB_PULLUP (TOSA_SCOOP_JC_GPIO_BASE + 3) #define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15 #define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16 #define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 -#define TOSA_SCOOP_JC_WLAN_LED SCOOP_GPCR_PA18 +#define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7) #define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 /* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \ - TOSA_SCOOP_JC_CHRG_ERR_LED | TOSA_SCOOP_JC_USB_PULLUP | \ +#define TOSA_SCOOP_JC_IO_DIR ( \ TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \ - TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL ) -/* GPIO out put level when init 1: Hi */ -#define TOSA_SCOOP_JC_IO_OUT ( 0 ) + TOSA_SCOOP_JC_CARD_LIMIT_SEL ) /* * Timing Generator @@ -74,15 +73,6 @@ #define TG_HPOSCTL 0x07 /* - * LED - */ -#define TOSA_SCOOP_LED_BLUE TOSA_SCOOP_GPCR_PA11 -#define TOSA_SCOOP_LED_GREEN TOSA_SCOOP_GPCR_PA12 -#define TOSA_SCOOP_LED_ORANGE TOSA_SCOOP_GPCR_PA13 -#define TOSA_SCOOP_LED_WLAN TOSA_SCOOP_GPCR_PA18 - - -/* * PXA GPIOs */ #define TOSA_GPIO_POWERON (0) @@ -161,12 +151,8 @@ #define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW) -extern struct platform_device tosascoop_jc_device; -extern struct platform_device tosascoop_device; - #define TOSA_KEY_SYNC KEY_102ND /* ??? */ - #ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES #define TOSA_KEY_RECORD KEY_YEN #define TOSA_KEY_ADDRESSBOOK KEY_KATAKANA diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h index 5f717d64ea7..4881b80f0f9 100644 --- a/include/asm-arm/arch-pxa/zylonite.h +++ b/include/asm-arm/arch-pxa/zylonite.h @@ -18,6 +18,8 @@ extern struct platform_mmc_slot zylonite_mmc_slot[]; extern int gpio_backlight; extern int gpio_eth_irq; +extern int wm9713_irq; + extern int lcd_id; extern int lcd_orientation; diff --git a/include/asm-arm/arch-realview/board-eb.h b/include/asm-arm/arch-realview/board-eb.h index 3e437b7f425..206f7a75288 100644 --- a/include/asm-arm/arch-realview/board-eb.h +++ b/include/asm-arm/arch-realview/board-eb.h @@ -26,6 +26,26 @@ /* * RealView EB + ARM11MPCore peripheral addresses */ +#define REALVIEW_EB_UART0_BASE 0x10009000 /* UART 0 */ +#define REALVIEW_EB_UART1_BASE 0x1000A000 /* UART 1 */ +#define REALVIEW_EB_UART2_BASE 0x1000B000 /* UART 2 */ +#define REALVIEW_EB_UART3_BASE 0x1000C000 /* UART 3 */ +#define REALVIEW_EB_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ +#define REALVIEW_EB_WATCHDOG_BASE 0x10010000 /* watchdog interface */ +#define REALVIEW_EB_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ +#define REALVIEW_EB_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ +#define REALVIEW_EB_GPIO0_BASE 0x10013000 /* GPIO port 0 */ +#define REALVIEW_EB_RTC_BASE 0x10017000 /* Real Time Clock */ +#define REALVIEW_EB_CLCD_BASE 0x10020000 /* CLCD */ +#define REALVIEW_EB_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_EB_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */ +#define REALVIEW_EB_SMC_BASE 0x10080000 /* Static memory controller */ + +#define REALVIEW_EB_FLASH_BASE 0x40000000 +#define REALVIEW_EB_FLASH_SIZE SZ_64M +#define REALVIEW_EB_ETH_BASE 0x4E000000 /* Ethernet */ +#define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */ + #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB #define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */ #define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */ diff --git a/include/asm-arm/arch-realview/board-pb1176.h b/include/asm-arm/arch-realview/board-pb1176.h new file mode 100644 index 00000000000..48ce9c83370 --- /dev/null +++ b/include/asm-arm/arch-realview/board-pb1176.h @@ -0,0 +1,152 @@ +/* + * include/asm-arm/arch-realview/board-pb1176.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_BOARD_PB1176_H +#define __ASM_ARCH_BOARD_PB1176_H + +#include <asm/arch/platform.h> + +/* + * Peripheral addresses + */ +#define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */ +#define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */ +#define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */ +#define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ +#define REALVIEW_PB1176_FLASH_BASE 0x30000000 +#define REALVIEW_PB1176_FLASH_SIZE SZ_64M + +#define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */ +#define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */ +#define REALVIEW_PB1176_TIMER4_5_BASE 0x10106000 /* Timer 4 and 5 */ +#define REALVIEW_PB1176_WATCHDOG_BASE 0x10107000 /* watchdog interface */ +#define REALVIEW_PB1176_RTC_BASE 0x10108000 /* Real Time Clock */ +#define REALVIEW_PB1176_GPIO0_BASE 0x1010A000 /* GPIO port 0 */ +#define REALVIEW_PB1176_SSP_BASE 0x1010B000 /* Synchronous Serial Port */ +#define REALVIEW_PB1176_UART0_BASE 0x1010C000 /* UART 0 */ +#define REALVIEW_PB1176_UART1_BASE 0x1010D000 /* UART 1 */ +#define REALVIEW_PB1176_UART2_BASE 0x1010E000 /* UART 2 */ +#define REALVIEW_PB1176_UART3_BASE 0x1010F000 /* UART 3 */ +#define REALVIEW_PB1176_CLCD_BASE 0x10112000 /* CLCD */ +#define REALVIEW_PB1176_ETH_BASE 0x3A000000 /* Ethernet */ +#define REALVIEW_PB1176_USB_BASE 0x3B000000 /* USB */ + +/* + * PCI regions + */ +#define REALVIEW_PB1176_PCI_BASE 0x60000000 /* PCI self config */ +#define REALVIEW_PB1176_PCI_CFG_BASE 0x61000000 /* PCI config */ +#define REALVIEW_PB1176_PCI_IO_BASE0 0x62000000 /* PCI IO region */ +#define REALVIEW_PB1176_PCI_MEM_BASE0 0x63000000 /* Memory region 1 */ +#define REALVIEW_PB1176_PCI_MEM_BASE1 0x64000000 /* Memory region 2 */ +#define REALVIEW_PB1176_PCI_MEM_BASE2 0x68000000 /* Memory region 3 */ + +#define REALVIEW_PB1176_PCI_BASE_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE 0x01000000 /* 16MB */ +#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE 0x04000000 /* 64MB */ +#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE 0x08000000 /* 128MB */ + +#define REALVIEW_DC1176_GIC_CPU_BASE 0x10120000 /* GIC CPU interface, on devchip */ +#define REALVIEW_DC1176_GIC_DIST_BASE 0x10121000 /* GIC distributor, on devchip */ +#define REALVIEW_PB1176_GIC_CPU_BASE 0x10040000 /* GIC CPU interface, on FPGA */ +#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ +#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ + +/* + * Irqs + */ +#define IRQ_DC1176_GIC_START 32 +#define IRQ_PB1176_GIC_START 64 + +/* + * ARM1176 DevChip interrupt sources (primary GIC) + */ +#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */ +#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */ +#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */ +#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */ +#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */ +#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11) +#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12) +#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) +#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) +#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ +#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ +#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ +#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ +#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */ + +#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */ +#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */ + +/* + * RealView PB1176 interrupt sources (secondary GIC) + */ +#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */ +#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */ +#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */ +#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */ +#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5) +#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */ +#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */ +#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8) +#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9) +#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */ +#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */ + +#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16) + +#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */ + +#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22) +#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23) +#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */ +#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ + +#define IRQ_PB1176_GPIO0 -1 +#define IRQ_PB1176_SSP -1 +#define IRQ_PB1176_SCTL -1 + +#define NR_GIC_PB1176 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_PB1176 + */ +#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PB1176) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PB1176 +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PB1176 +#endif + +#endif /* CONFIG_MACH_REALVIEW_PB1176 */ + +#endif /* __ASM_ARCH_BOARD_PB1176_H */ diff --git a/include/asm-arm/arch-realview/board-pb11mp.h b/include/asm-arm/arch-realview/board-pb11mp.h new file mode 100644 index 00000000000..a1294d915fa --- /dev/null +++ b/include/asm-arm/arch-realview/board-pb11mp.h @@ -0,0 +1,186 @@ +/* + * include/asm-arm/arch-realview/board-pb11mp.h + * + * Copyright (C) 2008 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_BOARD_PB11MP_H +#define __ASM_ARCH_BOARD_PB11MP_H + +#include <asm/arch/platform.h> + +/* + * Peripheral addresses + */ +#define REALVIEW_PB11MP_UART0_BASE 0x10009000 /* UART 0 */ +#define REALVIEW_PB11MP_UART1_BASE 0x1000A000 /* UART 1 */ +#define REALVIEW_PB11MP_UART2_BASE 0x1000B000 /* UART 2 */ +#define REALVIEW_PB11MP_UART3_BASE 0x1000C000 /* UART 3 */ +#define REALVIEW_PB11MP_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ +#define REALVIEW_PB11MP_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */ +#define REALVIEW_PB11MP_WATCHDOG_BASE 0x10010000 /* watchdog interface */ +#define REALVIEW_PB11MP_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ +#define REALVIEW_PB11MP_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ +#define REALVIEW_PB11MP_GPIO0_BASE 0x10013000 /* GPIO port 0 */ +#define REALVIEW_PB11MP_RTC_BASE 0x10017000 /* Real Time Clock */ +#define REALVIEW_PB11MP_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */ +#define REALVIEW_PB11MP_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */ +#define REALVIEW_PB11MP_SCTL_BASE 0x1001A000 /* System Controller */ +#define REALVIEW_PB11MP_CLCD_BASE 0x10020000 /* CLCD */ +#define REALVIEW_PB11MP_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */ +#define REALVIEW_PB11MP_DMC_BASE 0x100E0000 /* DMC configuration */ +#define REALVIEW_PB11MP_SMC_BASE 0x100E1000 /* SMC configuration */ +#define REALVIEW_PB11MP_CAN_BASE 0x100E2000 /* CAN bus */ +#define REALVIEW_PB11MP_CF_BASE 0x18000000 /* Compact flash */ +#define REALVIEW_PB11MP_CF_MEM_BASE 0x18003000 /* SMC for Compact flash */ +#define REALVIEW_PB11MP_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_PB11MP_FLASH0_BASE 0x40000000 +#define REALVIEW_PB11MP_FLASH0_SIZE SZ_64M +#define REALVIEW_PB11MP_FLASH1_BASE 0x44000000 +#define REALVIEW_PB11MP_FLASH1_SIZE SZ_64M +#define REALVIEW_PB11MP_ETH_BASE 0x4E000000 /* Ethernet */ +#define REALVIEW_PB11MP_USB_BASE 0x4F000000 /* USB */ +#define REALVIEW_PB11MP_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */ +#define REALVIEW_PB11MP_LT_BASE 0xC0000000 /* Logic Tile expansion */ +#define REALVIEW_PB11MP_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */ +#define REALVIEW_PB11MP_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */ + +#define REALVIEW_PB11MP_SYS_PLD_CTRL1 0x74 + +/* + * PB11MPCore PCI regions + */ +#define REALVIEW_PB11MP_PCI_BASE 0x90040000 /* PCI-X Unit base */ +#define REALVIEW_PB11MP_PCI_IO_BASE 0x90050000 /* IO Region on AHB */ +#define REALVIEW_PB11MP_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */ + +#define REALVIEW_PB11MP_PCI_BASE_SIZE 0x10000 /* 16 Kb */ +#define REALVIEW_PB11MP_PCI_IO_SIZE 0x1000 /* 4 Kb */ +#define REALVIEW_PB11MP_PCI_MEM_SIZE 0x20000000 /* 512 MB */ + +/* + * Testchip peripheral and fpga gic regions + */ +#define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */ +#define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */ +#define REALVIEW_TC11MP_TWD_BASE 0x1F000700 +#define REALVIEW_TC11MP_TWD_SIZE 0x00000100 +#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ +#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ + +/* + * Irqs + */ +#define IRQ_TC11MP_GIC_START 32 +#define IRQ_PB11MP_GIC_START 64 + +/* + * ARM11MPCore test chip interrupt sources (primary GIC on the test chip) + */ +#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0) +#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1) +#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2) +#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3) +#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4) +#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5) +#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6) +#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7) +#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8) +#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9) +#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */ +#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */ +#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */ +#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */ +#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14) +#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15) + +#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17) +#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18) +#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19) +#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20) +#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21) +#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22) +#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23) +#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24) +#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25) +#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26) +#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27) +#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28) + +#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29) +#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30) +#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31) + +/* + * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board) + */ +#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */ +#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */ +#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */ +#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */ +#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */ +#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */ +#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */ + /* 9 reserved */ +#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */ +#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */ +#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */ +#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */ +#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */ +#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */ +#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */ +#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */ +#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */ +#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */ +#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */ +#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */ +#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */ +#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */ +#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */ +#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */ +#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */ +#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */ +#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */ +#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */ +#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */ +#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */ + +#define IRQ_PB11MP_SMC -1 +#define IRQ_PB11MP_SCTL -1 + +#define NR_GIC_PB11MP 2 + +/* + * Only define NR_IRQS if less than NR_IRQS_PB11MP + */ +#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96) + +#if defined(CONFIG_MACH_REALVIEW_PB11MP) + +#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP) +#undef NR_IRQS +#define NR_IRQS NR_IRQS_PB11MP +#endif + +#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP) +#undef MAX_GIC_NR +#define MAX_GIC_NR NR_GIC_PB11MP +#endif + +#endif /* CONFIG_MACH_REALVIEW_PB11MP */ + +#endif /* __ASM_ARCH_BOARD_PB11MP_H */ diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S index f17efc65518..c8c860c3c26 100644 --- a/include/asm-arm/arch-realview/debug-macro.S +++ b/include/asm-arm/arch-realview/debug-macro.S @@ -15,7 +15,7 @@ mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? moveq \rx, #0x10000000 - movne \rx, #0xf1000000 @ virtual base + movne \rx, #0xf0000000 @ virtual base orr \rx, \rx, #0x00009000 .endm diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h index bad8d7ce9bf..1ee8313ceb6 100644 --- a/include/asm-arm/arch-realview/hardware.h +++ b/include/asm-arm/arch-realview/hardware.h @@ -25,7 +25,7 @@ #include <asm/sizes.h> /* macro to get at IO space when running virtually */ -#define IO_ADDRESS(x) ((((x) & 0x0effffff) | (((x) >> 4) & 0x0f000000)) + 0xf0000000) +#define IO_ADDRESS(x) (((x) & 0x0fffffff) + 0xf0000000) #define __io_address(n) __io(IO_ADDRESS(n)) #endif diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h index ad0c911002f..ccbac59235c 100644 --- a/include/asm-arm/arch-realview/irqs.h +++ b/include/asm-arm/arch-realview/irqs.h @@ -23,6 +23,8 @@ #define __ASM_ARCH_IRQS_H #include <asm/arch/board-eb.h> +#include <asm/arch/board-pb11mp.h> +#include <asm/arch/board-pb1176.h> #define IRQ_LOCALTIMER 29 #define IRQ_LOCALWDOG 30 diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h index 4fd351b5e4a..424c0aaf46a 100644 --- a/include/asm-arm/arch-realview/platform.h +++ b/include/asm-arm/arch-realview/platform.h @@ -32,9 +32,6 @@ #define REALVIEW_SSRAM_BASE /* REALVIEW_SSMC_BASE ? */ #define REALVIEW_SSRAM_SIZE SZ_2M -#define REALVIEW_FLASH_BASE 0x40000000 -#define REALVIEW_FLASH_SIZE SZ_64M - /* * SDRAM */ @@ -175,42 +172,20 @@ #define REALVIEW_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */ /* - * REALVIEW peripheral addresses + * RealView common peripheral addresses */ #define REALVIEW_SCTL_BASE 0x10001000 /* System controller */ #define REALVIEW_I2C_BASE 0x10002000 /* I2C control */ - /* Reserved 0x10003000 */ #define REALVIEW_AACI_BASE 0x10004000 /* Audio */ #define REALVIEW_MMCI0_BASE 0x10005000 /* MMC interface */ #define REALVIEW_KMI0_BASE 0x10006000 /* KMI interface */ #define REALVIEW_KMI1_BASE 0x10007000 /* KMI 2nd interface */ #define REALVIEW_CHAR_LCD_BASE 0x10008000 /* Character LCD */ -#define REALVIEW_UART0_BASE 0x10009000 /* UART 0 */ -#define REALVIEW_UART1_BASE 0x1000A000 /* UART 1 */ -#define REALVIEW_UART2_BASE 0x1000B000 /* UART 2 */ -#define REALVIEW_UART3_BASE 0x1000C000 /* UART 3 */ -#define REALVIEW_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ #define REALVIEW_SCI_BASE 0x1000E000 /* Smart card controller */ - /* Reserved 0x1000F000 */ -#define REALVIEW_WATCHDOG_BASE 0x10010000 /* watchdog interface */ -#define REALVIEW_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ -#define REALVIEW_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ -#define REALVIEW_GPIO0_BASE 0x10013000 /* GPIO port 0 */ #define REALVIEW_GPIO1_BASE 0x10014000 /* GPIO port 1 */ #define REALVIEW_GPIO2_BASE 0x10015000 /* GPIO port 2 */ - /* Reserved 0x10016000 */ -#define REALVIEW_RTC_BASE 0x10017000 /* Real Time Clock */ #define REALVIEW_DMC_BASE 0x10018000 /* DMC configuration */ -#define REALVIEW_PCI_CORE_BASE 0x10019000 /* PCI configuration */ - /* Reserved 0x1001A000 - 0x1001FFFF */ -#define REALVIEW_CLCD_BASE 0x10020000 /* CLCD */ #define REALVIEW_DMAC_BASE 0x10030000 /* DMA controller */ -#define REALVIEW_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */ -#define REALVIEW_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */ -#define REALVIEW_SMC_BASE 0x10080000 /* SMC */ - /* Reserved 0x10090000 - 0x100EFFFF */ - -#define REALVIEW_ETH_BASE 0x4E000000 /* Ethernet */ /* PCI space */ #define REALVIEW_PCI_BASE 0x41000000 /* PCI Interface */ diff --git a/include/asm-arm/arch-realview/scu.h b/include/asm-arm/arch-realview/scu.h index 08b3db883c3..d55802d645a 100644 --- a/include/asm-arm/arch-realview/scu.h +++ b/include/asm-arm/arch-realview/scu.h @@ -1,8 +1,13 @@ #ifndef __ASMARM_ARCH_SCU_H #define __ASMARM_ARCH_SCU_H -#include <asm/arch/board-eb.h> - -#define SCU_BASE REALVIEW_EB11MP_SCU_BASE +/* + * SCU registers + */ +#define SCU_CTRL 0x00 +#define SCU_CONFIG 0x04 +#define SCU_CPU_STATUS 0x08 +#define SCU_INVALIDATE 0x0c +#define SCU_FPGA_REVISION 0x10 #endif diff --git a/include/asm-arm/arch-realview/uncompress.h b/include/asm-arm/arch-realview/uncompress.h index 3d5c2db07a2..4c905d7a13a 100644 --- a/include/asm-arm/arch-realview/uncompress.h +++ b/include/asm-arm/arch-realview/uncompress.h @@ -18,28 +18,50 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <asm/hardware.h> +#include <asm/mach-types.h> -#include <asm/arch/platform.h> +#include <asm/arch/board-eb.h> +#include <asm/arch/board-pb11mp.h> +#include <asm/arch/board-pb1176.h> -#define AMBA_UART_DR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x00)) -#define AMBA_UART_LCRH (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x2c)) -#define AMBA_UART_CR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x30)) -#define AMBA_UART_FR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x18)) +#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) +#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c)) +#define AMBA_UART_CR(base) (*(volatile unsigned char *)((base) + 0x30)) +#define AMBA_UART_FR(base) (*(volatile unsigned char *)((base) + 0x18)) + +/* + * Return the UART base address + */ +static inline unsigned long get_uart_base(void) +{ + if (machine_is_realview_eb()) + return REALVIEW_EB_UART0_BASE; + else if (machine_is_realview_pb11mp()) + return REALVIEW_PB11MP_UART0_BASE; + else if (machine_is_realview_pb1176()) + return REALVIEW_PB1176_UART0_BASE; + else + return 0; +} /* * This does not append a newline */ static inline void putc(int c) { - while (AMBA_UART_FR & (1 << 5)) + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 5)) barrier(); - AMBA_UART_DR = c; + AMBA_UART_DR(base) = c; } static inline void flush(void) { - while (AMBA_UART_FR & (1 << 3)) + unsigned long base = get_uart_base(); + + while (AMBA_UART_FR(base) & (1 << 3)) barrier(); } diff --git a/include/asm-arm/arch-s3c2410/regs-clock.h b/include/asm-arm/arch-s3c2410/regs-clock.h index dba9df9d871..ecae9e7f5e4 100644 --- a/include/asm-arm/arch-s3c2410/regs-clock.h +++ b/include/asm-arm/arch-s3c2410/regs-clock.h @@ -137,7 +137,7 @@ s3c2410_get_pll(unsigned int pllval, unsigned int baseclk) #define S3C2412_CLKDIVN_PDIVN (1<<2) #define S3C2412_CLKDIVN_HDIVN_MASK (3<<0) -#define S3C2421_CLKDIVN_ARMDIVN (1<<3) +#define S3C2412_CLKDIVN_ARMDIVN (1<<3) #define S3C2412_CLKDIVN_DVSEN (1<<4) #define S3C2412_CLKDIVN_HALFHCLK (1<<5) #define S3C2412_CLKDIVN_USB48DIV (1<<6) diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h index 0ad75d716de..497dd06e2c9 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -529,11 +529,13 @@ #define S3C2410_GPD14_INP (0x00 << 28) #define S3C2410_GPD14_OUTP (0x01 << 28) #define S3C2410_GPD14_VD22 (0x02 << 28) +#define S3C2410_GPD14_nSS1 (0x03 << 28) #define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15) #define S3C2410_GPD15_INP (0x00 << 30) #define S3C2410_GPD15_OUTP (0x01 << 30) #define S3C2410_GPD15_VD23 (0x02 << 30) +#define S3C2410_GPD15_nSS0 (0x03 << 30) #define S3C2410_GPD_PUPDIS(x) (1<<(x)) @@ -801,12 +803,14 @@ #define S3C2410_GPG2_INP (0x00 << 4) #define S3C2410_GPG2_OUTP (0x01 << 4) #define S3C2410_GPG2_EINT10 (0x02 << 4) +#define S3C2410_GPG2_nSS0 (0x03 << 4) #define S3C2400_GPG2_CDCLK (0x02 << 4) #define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3) #define S3C2410_GPG3_INP (0x00 << 6) #define S3C2410_GPG3_OUTP (0x01 << 6) #define S3C2410_GPG3_EINT11 (0x02 << 6) +#define S3C2410_GPG3_nSS1 (0x03 << 6) #define S3C2400_GPG3_I2SSDO (0x02 << 6) #define S3C2400_GPG3_I2SSDI (0x03 << 6) diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h b/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h new file mode 100644 index 00000000000..c8c793e7893 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h @@ -0,0 +1,29 @@ +/* linux/include/asm-arm/arch-s3c2410/regs-s3c2412-mem.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2412 memory register definitions +*/ + +#ifndef __ASM_ARM_REGS_S3C2412_MEM +#define __ASM_ARM_REGS_S3C2412_MEM + +#ifndef S3C2412_MEMREG +#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) +#endif + +#define S3C2412_BANKCFG S3C2412_MEMREG(0x00) +#define S3C2412_BANKCON1 S3C2412_MEMREG(0x04) +#define S3C2412_BANKCON2 S3C2412_MEMREG(0x08) +#define S3C2412_BANKCON3 S3C2412_MEMREG(0x0C) + +#define S3C2412_REFRESH S3C2412_MEMREG(0x10) +#define S3C2412_TIMEOUT S3C2412_MEMREG(0x14) + +#endif /* __ASM_ARM_REGS_S3C2412_MEM */ diff --git a/include/asm-arm/arch-s3c2410/system-reset.h b/include/asm-arm/arch-s3c2410/system-reset.h new file mode 100644 index 00000000000..1615bce0c02 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/system-reset.h @@ -0,0 +1,64 @@ +/* linux/include/asm-arm/arch-s3c2410/system-reset.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - System define for arch_reset() function + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <asm/hardware.h> +#include <asm/io.h> + +#include <asm/plat-s3c/regs-watchdog.h> +#include <asm/arch/regs-clock.h> + +#include <linux/clk.h> +#include <linux/err.h> + +extern void (*s3c24xx_reset_hook)(void); + +static void +arch_reset(char mode) +{ + struct clk *wdtclk; + + if (mode == 's') { + cpu_reset(0); + } + + if (s3c24xx_reset_hook) + s3c24xx_reset_hook(); + + printk("arch_reset: attempting watchdog reset\n"); + + __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ + + wdtclk = clk_get(NULL, "watchdog"); + if (!IS_ERR(wdtclk)) { + clk_enable(wdtclk); + } else + printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + + /* put initial values into count and data */ + __raw_writel(0x80, S3C2410_WTCNT); + __raw_writel(0x80, S3C2410_WTDAT); + + /* set the watchdog to go and reset... */ + __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | + S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON); + + /* wait for reset to assert... */ + mdelay(500); + + printk(KERN_ERR "Watchdog reset failed to assert reset\n"); + + /* delay to allow the serial port to show the message */ + mdelay(50); + + /* we'll take a jump through zero as a poor second */ + cpu_reset(0); +} diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h index 14de4e596f8..ad258085e53 100644 --- a/include/asm-arm/arch-s3c2410/system.h +++ b/include/asm-arm/arch-s3c2410/system.h @@ -17,12 +17,8 @@ #include <asm/arch/idle.h> #include <asm/arch/reset.h> -#include <asm/plat-s3c/regs-watchdog.h> #include <asm/arch/regs-clock.h> -#include <linux/clk.h> -#include <linux/err.h> - void (*s3c24xx_idle)(void); void (*s3c24xx_reset_hook)(void); @@ -59,44 +55,4 @@ static void arch_idle(void) s3c24xx_default_idle(); } -static void -arch_reset(char mode) -{ - struct clk *wdtclk; - - if (mode == 's') { - cpu_reset(0); - } - - if (s3c24xx_reset_hook) - s3c24xx_reset_hook(); - - printk("arch_reset: attempting watchdog reset\n"); - - __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - - wdtclk = clk_get(NULL, "watchdog"); - if (!IS_ERR(wdtclk)) { - clk_enable(wdtclk); - } else - printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); - - /* put initial values into count and data */ - __raw_writel(0x80, S3C2410_WTCNT); - __raw_writel(0x80, S3C2410_WTDAT); - - /* set the watchdog to go and reset... */ - __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN | - S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON); - - /* wait for reset to assert... */ - mdelay(500); - - printk(KERN_ERR "Watchdog reset failed to assert reset\n"); - - /* delay to allow the serial port to show the message */ - mdelay(50); - - /* we'll take a jump through zero as a poor second */ - cpu_reset(0); -} +#include <asm/arch/system-reset.h> diff --git a/include/asm-arm/arch-sa1100/gpio.h b/include/asm-arm/arch-sa1100/gpio.h index e7a9d26e22a..93d3395b102 100644 --- a/include/asm-arm/arch-sa1100/gpio.h +++ b/include/asm-arm/arch-sa1100/gpio.h @@ -26,35 +26,28 @@ #include <asm/hardware.h> #include <asm/irq.h> - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ - return; -} - -extern int gpio_direction_input(unsigned gpio); -extern int gpio_direction_output(unsigned gpio, int value); - +#include <asm-generic/gpio.h> static inline int gpio_get_value(unsigned gpio) { - return GPLR & GPIO_GPIO(gpio); + if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX)) + return GPLR & GPIO_GPIO(gpio); + else + return __gpio_get_value(gpio); } static inline void gpio_set_value(unsigned gpio, int value) { - if (value) - GPSR = GPIO_GPIO(gpio); + if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX)) + if (value) + GPSR = GPIO_GPIO(gpio); + else + GPCR = GPIO_GPIO(gpio); else - GPCR = GPIO_GPIO(gpio); + __gpio_set_value(gpio, value); } -#include <asm-generic/gpio.h> /* cansleep wrappers */ +#define gpio_cansleep __gpio_cansleep static inline unsigned gpio_to_irq(unsigned gpio) { diff --git a/include/asm-arm/arch-sa1100/ide.h b/include/asm-arm/arch-sa1100/ide.h index 98b10bcf9f1..b14cbda01dc 100644 --- a/include/asm-arm/arch-sa1100/ide.h +++ b/include/asm-arm/arch-sa1100/ide.h @@ -37,12 +37,12 @@ static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, memset(hw, 0, sizeof(*hw)); - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { - hw->io_ports[i] = reg; + for (i = 0; i <= 7; i++) { + hw->io_ports_array[i] = reg; reg += regincr; } - hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port; + hw->io_ports.ctl_addr = ctrl_port; if (irq) *irq = 0; diff --git a/include/asm-arm/cpu-multi32.h b/include/asm-arm/cpu-multi32.h index 715e18a4add..3479de9266e 100644 --- a/include/asm-arm/cpu-multi32.h +++ b/include/asm-arm/cpu-multi32.h @@ -21,6 +21,10 @@ extern struct processor { */ void (*_data_abort)(unsigned long pc); /* + * Retrieve prefetch fault address + */ + unsigned long (*_prefetch_abort)(unsigned long lr); + /* * Set up any processor specifics */ void (*_proc_init)(void); diff --git a/include/asm-arm/div64.h b/include/asm-arm/div64.h index 0b5f881c3d8..5001390be95 100644 --- a/include/asm-arm/div64.h +++ b/include/asm-arm/div64.h @@ -224,6 +224,4 @@ #endif -extern uint64_t div64_64(uint64_t dividend, uint64_t divisor); - #endif diff --git a/include/asm-arm/glue.h b/include/asm-arm/glue.h index 22274ce8137..a97a182ba28 100644 --- a/include/asm-arm/glue.h +++ b/include/asm-arm/glue.h @@ -40,83 +40,110 @@ * v6_early - ARMv6 generic early abort handler * v7_early - ARMv7 generic early abort handler */ -#undef CPU_ABORT_HANDLER -#undef MULTI_ABORT +#undef CPU_DABORT_HANDLER +#undef MULTI_DABORT #if defined(CONFIG_CPU_ARM610) -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER cpu_arm6_data_abort +# define CPU_DABORT_HANDLER cpu_arm6_data_abort # endif #endif #if defined(CONFIG_CPU_ARM710) -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER cpu_arm7_data_abort +# define CPU_DABORT_HANDLER cpu_arm7_data_abort # endif #endif #ifdef CONFIG_CPU_ABRT_LV4T -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER v4t_late_abort +# define CPU_DABORT_HANDLER v4t_late_abort # endif #endif #ifdef CONFIG_CPU_ABRT_EV4 -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER v4_early_abort +# define CPU_DABORT_HANDLER v4_early_abort # endif #endif #ifdef CONFIG_CPU_ABRT_EV4T -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER v4t_early_abort +# define CPU_DABORT_HANDLER v4t_early_abort # endif #endif #ifdef CONFIG_CPU_ABRT_EV5TJ -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER v5tj_early_abort +# define CPU_DABORT_HANDLER v5tj_early_abort # endif #endif #ifdef CONFIG_CPU_ABRT_EV5T -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER v5t_early_abort +# define CPU_DABORT_HANDLER v5t_early_abort # endif #endif #ifdef CONFIG_CPU_ABRT_EV6 -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER v6_early_abort +# define CPU_DABORT_HANDLER v6_early_abort # endif #endif #ifdef CONFIG_CPU_ABRT_EV7 -# ifdef CPU_ABORT_HANDLER -# define MULTI_ABORT 1 +# ifdef CPU_DABORT_HANDLER +# define MULTI_DABORT 1 # else -# define CPU_ABORT_HANDLER v7_early_abort +# define CPU_DABORT_HANDLER v7_early_abort # endif #endif -#ifndef CPU_ABORT_HANDLER +#ifndef CPU_DABORT_HANDLER #error Unknown data abort handler type #endif +/* + * Prefetch abort handler. If the CPU has an IFAR use that, otherwise + * use the address of the aborted instruction + */ +#undef CPU_PABORT_HANDLER +#undef MULTI_PABORT + +#ifdef CONFIG_CPU_PABRT_IFAR +# ifdef CPU_PABORT_HANDLER +# define MULTI_PABORT 1 +# else +# define CPU_PABORT_HANDLER(reg, insn) mrc p15, 0, reg, cr6, cr0, 2 +# endif +#endif + +#ifdef CONFIG_CPU_PABRT_NOIFAR +# ifdef CPU_PABORT_HANDLER +# define MULTI_PABORT 1 +# else +# define CPU_PABORT_HANDLER(reg, insn) mov reg, insn +# endif +#endif + +#ifndef CPU_PABORT_HANDLER +#error Unknown prefetch abort handler type +#endif + #endif diff --git a/include/asm-arm/hardware/arm_scu.h b/include/asm-arm/hardware/arm_scu.h deleted file mode 100644 index 7d28eb5a175..00000000000 --- a/include/asm-arm/hardware/arm_scu.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef ASMARM_HARDWARE_ARM_SCU_H -#define ASMARM_HARDWARE_ARM_SCU_H - -#include <asm/arch/scu.h> - -/* - * SCU registers - */ -#define SCU_CTRL 0x00 -#define SCU_CONFIG 0x04 -#define SCU_CPU_STATUS 0x08 -#define SCU_INVALIDATE 0x0c -#define SCU_FPGA_REVISION 0x10 - -#endif diff --git a/include/asm-arm/hardware/iop3xx-adma.h b/include/asm-arm/hardware/iop3xx-adma.h index 5c529e6a5e3..a32b86ac62a 100644 --- a/include/asm-arm/hardware/iop3xx-adma.h +++ b/include/asm-arm/hardware/iop3xx-adma.h @@ -260,7 +260,7 @@ static inline int iop_chan_memset_slot_count(size_t len, int *slots_per_op) static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt, int *slots_per_op) { - const static int slot_count_table[] = { 0, + static const int slot_count_table[] = { 0, 1, 1, 1, 1, /* 01 - 04 */ 2, 2, 2, 2, /* 05 - 08 */ 4, 4, 4, 4, /* 09 - 12 */ @@ -369,7 +369,7 @@ static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc, /* translate the src_idx to a descriptor word index */ static inline int __desc_idx(int src_idx) { - const static int desc_idx_table[] = { 0, 0, 0, 0, + static const int desc_idx_table[] = { 0, 0, 0, 0, 0, 1, 2, 3, 5, 6, 7, 8, 9, 10, 11, 12, @@ -767,20 +767,12 @@ static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc) static inline void iop_chan_append(struct iop_adma_chan *chan) { u32 dma_chan_ctrl; - /* workaround dropped interrupts on 3xx */ - mod_timer(&chan->cleanup_watchdog, jiffies + msecs_to_jiffies(3)); dma_chan_ctrl = __raw_readl(DMA_CCR(chan)); dma_chan_ctrl |= 0x2; __raw_writel(dma_chan_ctrl, DMA_CCR(chan)); } -static inline void iop_chan_idle(int busy, struct iop_adma_chan *chan) -{ - if (!busy) - del_timer(&chan->cleanup_watchdog); -} - static inline u32 iop_chan_get_status(struct iop_adma_chan *chan) { return __raw_readl(DMA_CSR(chan)); diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h index ede377ec914..18f6937f501 100644 --- a/include/asm-arm/hardware/iop3xx.h +++ b/include/asm-arm/hardware/iop3xx.h @@ -29,6 +29,7 @@ extern void gpio_line_config(int line, int direction); extern int gpio_line_get(int line); extern void gpio_line_set(int line, int value); extern int init_atu; +extern int iop3xx_get_init_atu(void); #endif @@ -112,14 +113,6 @@ extern int init_atu; #define IOP3XX_INIT_ATU_DISABLE -1 #define IOP3XX_INIT_ATU_ENABLE 1 -#ifdef CONFIG_IOP3XX_ATU -#define iop3xx_get_init_atu(x) (init_atu == IOP3XX_INIT_ATU_DEFAULT ?\ - IOP3XX_INIT_ATU_ENABLE : init_atu) -#else -#define iop3xx_get_init_atu(x) (init_atu == IOP3XX_INIT_ATU_DEFAULT ?\ - IOP3XX_INIT_ATU_DISABLE : init_atu) -#endif - /* Messaging Unit */ #define IOP3XX_IMR0 (volatile u32 *)IOP3XX_REG_ADDR(0x0310) #define IOP3XX_IMR1 (volatile u32 *)IOP3XX_REG_ADDR(0x0314) diff --git a/include/asm-arm/hardware/iop_adma.h b/include/asm-arm/hardware/iop_adma.h index ca8e71f4434..cb7e3611bcb 100644 --- a/include/asm-arm/hardware/iop_adma.h +++ b/include/asm-arm/hardware/iop_adma.h @@ -51,7 +51,6 @@ struct iop_adma_device { * @common: common dmaengine channel object members * @last_used: place holder for allocation to continue from where it left off * @all_slots: complete domain of slots usable by the channel - * @cleanup_watchdog: workaround missed interrupts on iop3xx * @slots_allocated: records the actual size of the descriptor slot pool * @irq_tasklet: bottom half where iop_adma_slot_cleanup runs */ @@ -65,7 +64,6 @@ struct iop_adma_chan { struct dma_chan common; struct iop_adma_desc_slot *last_used; struct list_head all_slots; - struct timer_list cleanup_watchdog; int slots_allocated; struct tasklet_struct irq_tasklet; }; diff --git a/include/asm-arm/hardware/scoop.h b/include/asm-arm/hardware/scoop.h index d37bf744326..dfb8330599f 100644 --- a/include/asm-arm/hardware/scoop.h +++ b/include/asm-arm/hardware/scoop.h @@ -40,6 +40,7 @@ struct scoop_config { unsigned short io_dir; unsigned short suspend_clr; unsigned short suspend_set; + int gpio_base; }; /* Structure for linking scoop devices to PCMCIA sockets */ @@ -62,7 +63,7 @@ struct scoop_pcmcia_config { extern struct scoop_pcmcia_config *platform_scoop_config; void reset_scoop(struct device *dev); -unsigned short set_scoop_gpio(struct device *dev, unsigned short bit); -unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit); +unsigned short __deprecated set_scoop_gpio(struct device *dev, unsigned short bit); +unsigned short __deprecated reset_scoop_gpio(struct device *dev, unsigned short bit); unsigned short read_scoop_reg(struct device *dev, unsigned short reg); void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data); diff --git a/include/asm-arm/hwcap.h b/include/asm-arm/hwcap.h index 01a1391d301..81f4c899a55 100644 --- a/include/asm-arm/hwcap.h +++ b/include/asm-arm/hwcap.h @@ -15,6 +15,7 @@ #define HWCAP_JAVA 256 #define HWCAP_IWMMXT 512 #define HWCAP_CRUNCH 1024 +#define HWCAP_THUMBEE 2048 #if defined(__KERNEL__) && !defined(__ASSEMBLY__) /* diff --git a/include/asm-arm/ide.h b/include/asm-arm/ide.h index f348fcf3150..88f4d231ce4 100644 --- a/include/asm-arm/ide.h +++ b/include/asm-arm/ide.h @@ -17,14 +17,6 @@ #define MAX_HWIFS 4 #endif -#if !defined(CONFIG_ARCH_L7200) -# ifdef CONFIG_ARCH_CLPS7500 -# define ide_default_io_ctl(base) ((base) + 0x206) /* obsolete */ -# else -# define ide_default_io_ctl(base) (0) -# endif -#endif /* !ARCH_L7200 */ - #define __ide_mm_insw(port,addr,len) readsw(port,addr,len) #define __ide_mm_insl(port,addr,len) readsl(port,addr,len) #define __ide_mm_outsw(port,addr,len) writesw(port,addr,len) diff --git a/include/asm-arm/mach/pci.h b/include/asm-arm/mach/pci.h index 24621c49a0c..9d4f6b5ea41 100644 --- a/include/asm-arm/mach/pci.h +++ b/include/asm-arm/mach/pci.h @@ -55,6 +55,7 @@ void pci_common_init(struct hw_pci *); extern int iop3xx_pci_setup(int nr, struct pci_sys_data *); extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *); extern void iop3xx_pci_preinit(void); +extern void iop3xx_pci_preinit_cond(void); extern int dc21285_setup(int nr, struct pci_sys_data *); extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *); diff --git a/include/asm-arm/memory.h b/include/asm-arm/memory.h index d9bfb39adab..9ba4d7136e6 100644 --- a/include/asm-arm/memory.h +++ b/include/asm-arm/memory.h @@ -217,7 +217,10 @@ static inline __deprecated void *bus_to_virt(unsigned long x) #ifndef CONFIG_DISCONTIGMEM #define ARCH_PFN_OFFSET PHYS_PFN_OFFSET + +#ifndef CONFIG_SPARSEMEM #define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr)) +#endif #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) #define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h index c86f68ee651..5c22b011210 100644 --- a/include/asm-arm/page.h +++ b/include/asm-arm/page.h @@ -71,6 +71,14 @@ # endif #endif +#ifdef CONFIG_CPU_COPY_FEROCEON +# ifdef _USER +# define MULTI_USER 1 +# else +# define _USER feroceon +# endif +#endif + #ifdef CONFIG_CPU_SA1100 # ifdef _USER # define MULTI_USER 1 diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h index 5e0182485d8..5571c13c3f3 100644 --- a/include/asm-arm/pgtable.h +++ b/include/asm-arm/pgtable.h @@ -260,6 +260,7 @@ extern struct page *empty_zero_page; #define pte_write(pte) (pte_val(pte) & L_PTE_WRITE) #define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) #define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) +#define pte_special(pte) (0) /* * The following only works if pte_present() is not true. @@ -280,6 +281,8 @@ PTE_BIT_FUNC(mkdirty, |= L_PTE_DIRTY); PTE_BIT_FUNC(mkold, &= ~L_PTE_YOUNG); PTE_BIT_FUNC(mkyoung, |= L_PTE_YOUNG); +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + /* * Mark the prot value as uncacheable and unbufferable. */ diff --git a/include/asm-arm/plat-orion/ehci-orion.h b/include/asm-arm/plat-orion/ehci-orion.h new file mode 100644 index 00000000000..785705651e2 --- /dev/null +++ b/include/asm-arm/plat-orion/ehci-orion.h @@ -0,0 +1,19 @@ +/* + * include/asm-arm/plat-orion/ehci-orion.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_PLAT_ORION_EHCI_ORION_H +#define __ASM_PLAT_ORION_EHCI_ORION_H + +#include <linux/mbus.h> + +struct orion_ehci_data { + struct mbus_dram_target_info *dram; +}; + + +#endif diff --git a/include/asm-arm/plat-orion/irq.h b/include/asm-arm/plat-orion/irq.h new file mode 100644 index 00000000000..94aeed919d5 --- /dev/null +++ b/include/asm-arm/plat-orion/irq.h @@ -0,0 +1,17 @@ +/* + * include/asm-arm/plat-orion/irq.h + * + * Marvell Orion SoC IRQ handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_PLAT_ORION_IRQ_H +#define __ASM_PLAT_ORION_IRQ_H + +void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr); + + +#endif diff --git a/include/asm-arm/arch-orion/platform.h b/include/asm-arm/plat-orion/orion_nand.h index 143c38e2fa0..ffd3852a0dd 100644 --- a/include/asm-arm/arch-orion/platform.h +++ b/include/asm-arm/plat-orion/orion_nand.h @@ -1,15 +1,13 @@ /* - * asm-arm/arch-orion/platform.h - * - * Tzachi Perelstein <tzachi@marvell.com> + * include/asm-arm/plat-orion/orion_nand.h * * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any + * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#ifndef __ASM_ARCH_PLATFORM_H__ -#define __ASM_ARCH_PLATFORM_H__ +#ifndef __ASM_PLAT_ORION_ORION_NAND_H +#define __ASM_PLAT_ORION_ORION_NAND_H /* * Device bus NAND private data @@ -22,4 +20,5 @@ struct orion_nand_data { u8 width; /* buswidth */ }; + #endif diff --git a/include/asm-arm/plat-orion/pcie.h b/include/asm-arm/plat-orion/pcie.h new file mode 100644 index 00000000000..6434ac685d2 --- /dev/null +++ b/include/asm-arm/plat-orion/pcie.h @@ -0,0 +1,31 @@ +/* + * include/asm-arm/plat-orion/pcie.h + * + * Marvell Orion SoC PCIe handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_PLAT_ORION_PCIE_H +#define __ASM_PLAT_ORION_PCIE_H + +u32 orion_pcie_dev_id(void __iomem *base); +u32 orion_pcie_rev(void __iomem *base); +int orion_pcie_link_up(void __iomem *base); +int orion_pcie_get_local_bus_nr(void __iomem *base); +void orion_pcie_set_local_bus_nr(void __iomem *base, int nr); +void orion_pcie_setup(void __iomem *base, + struct mbus_dram_target_info *dram); +int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val); +int orion_pcie_rd_conf_tlp(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val); +int orion_pcie_rd_conf_wa(void __iomem *wa_base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 *val); +int orion_pcie_wr_conf(void __iomem *base, struct pci_bus *bus, + u32 devfn, int where, int size, u32 val); + + +#endif diff --git a/include/asm-arm/plat-orion/time.h b/include/asm-arm/plat-orion/time.h new file mode 100644 index 00000000000..0e85cc8f44d --- /dev/null +++ b/include/asm-arm/plat-orion/time.h @@ -0,0 +1,17 @@ +/* + * include/asm-arm/plat-orion/time.h + * + * Marvell Orion SoC time handling. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_PLAT_ORION_TIME_H +#define __ASM_PLAT_ORION_TIME_H + +void orion_time_init(unsigned int irq, unsigned int tclk); + + +#endif diff --git a/include/asm-arm/plat-s3c/nand.h b/include/asm-arm/plat-s3c/nand.h index 8816f7f9cee..ad6bbe90616 100644 --- a/include/asm-arm/plat-s3c/nand.h +++ b/include/asm-arm/plat-s3c/nand.h @@ -22,11 +22,14 @@ */ struct s3c2410_nand_set { + unsigned int disable_ecc : 1; + int nr_chips; int nr_partitions; char *name; int *nr_map; struct mtd_partition *partitions; + struct nand_ecclayout *ecc_layout; }; struct s3c2410_platform_nand { @@ -36,6 +39,8 @@ struct s3c2410_platform_nand { int twrph0; /* active time for nWE/nOE */ int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ + unsigned int ignore_unset_ecc : 1; + int nr_sets; struct s3c2410_nand_set *sets; diff --git a/include/asm-arm/semaphore-helper.h b/include/asm-arm/semaphore-helper.h deleted file mode 100644 index 1d7f1987edb..00000000000 --- a/include/asm-arm/semaphore-helper.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef ASMARM_SEMAPHORE_HELPER_H -#define ASMARM_SEMAPHORE_HELPER_H - -/* - * These two _must_ execute atomically wrt each other. - */ -static inline void wake_one_more(struct semaphore * sem) -{ - unsigned long flags; - - spin_lock_irqsave(&semaphore_wake_lock, flags); - if (atomic_read(&sem->count) <= 0) - sem->waking++; - spin_unlock_irqrestore(&semaphore_wake_lock, flags); -} - -static inline int waking_non_zero(struct semaphore *sem) -{ - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&semaphore_wake_lock, flags); - if (sem->waking > 0) { - sem->waking--; - ret = 1; - } - spin_unlock_irqrestore(&semaphore_wake_lock, flags); - return ret; -} - -/* - * waking non zero interruptible - * 1 got the lock - * 0 go to sleep - * -EINTR interrupted - * - * We must undo the sem->count down_interruptible() increment while we are - * protected by the spinlock in order to make this atomic_inc() with the - * atomic_read() in wake_one_more(), otherwise we can race. -arca - */ -static inline int waking_non_zero_interruptible(struct semaphore *sem, - struct task_struct *tsk) -{ - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&semaphore_wake_lock, flags); - if (sem->waking > 0) { - sem->waking--; - ret = 1; - } else if (signal_pending(tsk)) { - atomic_inc(&sem->count); - ret = -EINTR; - } - spin_unlock_irqrestore(&semaphore_wake_lock, flags); - return ret; -} - -/* - * waking_non_zero_try_lock: - * 1 failed to lock - * 0 got the lock - * - * We must undo the sem->count down_interruptible() increment while we are - * protected by the spinlock in order to make this atomic_inc() with the - * atomic_read() in wake_one_more(), otherwise we can race. -arca - */ -static inline int waking_non_zero_trylock(struct semaphore *sem) -{ - unsigned long flags; - int ret = 1; - - spin_lock_irqsave(&semaphore_wake_lock, flags); - if (sem->waking <= 0) - atomic_inc(&sem->count); - else { - sem->waking--; - ret = 0; - } - spin_unlock_irqrestore(&semaphore_wake_lock, flags); - return ret; -} - -#endif diff --git a/include/asm-arm/semaphore.h b/include/asm-arm/semaphore.h index 1c8b441f89e..d9b2034ed1d 100644 --- a/include/asm-arm/semaphore.h +++ b/include/asm-arm/semaphore.h @@ -1,98 +1 @@ -/* - * linux/include/asm-arm/semaphore.h - */ -#ifndef __ASM_ARM_SEMAPHORE_H -#define __ASM_ARM_SEMAPHORE_H - -#include <linux/linkage.h> -#include <linux/spinlock.h> -#include <linux/wait.h> -#include <linux/rwsem.h> - -#include <asm/atomic.h> -#include <asm/locks.h> - -struct semaphore { - atomic_t count; - int sleepers; - wait_queue_head_t wait; -}; - -#define __SEMAPHORE_INIT(name, cnt) \ -{ \ - .count = ATOMIC_INIT(cnt), \ - .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait), \ -} - -#define __DECLARE_SEMAPHORE_GENERIC(name,count) \ - struct semaphore name = __SEMAPHORE_INIT(name,count) - -#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1) - -static inline void sema_init(struct semaphore *sem, int val) -{ - atomic_set(&sem->count, val); - sem->sleepers = 0; - init_waitqueue_head(&sem->wait); -} - -static inline void init_MUTEX(struct semaphore *sem) -{ - sema_init(sem, 1); -} - -static inline void init_MUTEX_LOCKED(struct semaphore *sem) -{ - sema_init(sem, 0); -} - -/* - * special register calling convention - */ -asmlinkage void __down_failed(void); -asmlinkage int __down_interruptible_failed(void); -asmlinkage int __down_trylock_failed(void); -asmlinkage void __up_wakeup(void); - -extern void __down(struct semaphore * sem); -extern int __down_interruptible(struct semaphore * sem); -extern int __down_trylock(struct semaphore * sem); -extern void __up(struct semaphore * sem); - -/* - * This is ugly, but we want the default case to fall through. - * "__down" is the actual routine that waits... - */ -static inline void down(struct semaphore * sem) -{ - might_sleep(); - __down_op(sem, __down_failed); -} - -/* - * This is ugly, but we want the default case to fall through. - * "__down_interruptible" is the actual routine that waits... - */ -static inline int down_interruptible (struct semaphore * sem) -{ - might_sleep(); - return __down_op_ret(sem, __down_interruptible_failed); -} - -static inline int down_trylock(struct semaphore *sem) -{ - return __down_op_ret(sem, __down_trylock_failed); -} - -/* - * Note! This is subtle. We jump to wake people up only if - * the semaphore was negative (== somebody was waiting on it). - * The default case (no contention) will result in NO - * jumps for both down() and up(). - */ -static inline void up(struct semaphore * sem) -{ - __up_op(sem, __up_wakeup); -} - -#endif +#include <linux/semaphore.h> diff --git a/include/asm-arm/sparsemem.h b/include/asm-arm/sparsemem.h new file mode 100644 index 00000000000..277158191a0 --- /dev/null +++ b/include/asm-arm/sparsemem.h @@ -0,0 +1,10 @@ +#ifndef ASMARM_SPARSEMEM_H +#define ASMARM_SPARSEMEM_H + +#include <asm/memory.h> + +#define MAX_PHYSADDR_BITS 32 +#define MAX_PHYSMEM_BITS 32 +#define SECTION_SIZE_BITS NODE_MEM_SIZE_BITS + +#endif diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h index 41784357a20..f5a66478631 100644 --- a/include/asm-arm/thread_info.h +++ b/include/asm-arm/thread_info.h @@ -62,6 +62,9 @@ struct thread_info { struct crunch_state crunchstate; union fp_state fpstate __attribute__((aligned(8))); union vfp_state vfpstate; +#ifdef CONFIG_ARM_THUMBEE + unsigned long thumbee_state; /* ThumbEE Handler Base register */ +#endif struct restart_block restart_block; }; diff --git a/include/asm-arm/unaligned.h b/include/asm-arm/unaligned.h index 5db03cf3b90..44593a89490 100644 --- a/include/asm-arm/unaligned.h +++ b/include/asm-arm/unaligned.h @@ -1,171 +1,9 @@ -#ifndef __ASM_ARM_UNALIGNED_H -#define __ASM_ARM_UNALIGNED_H +#ifndef _ASM_ARM_UNALIGNED_H +#define _ASM_ARM_UNALIGNED_H -#include <asm/types.h> - -extern int __bug_unaligned_x(const void *ptr); - -/* - * What is the most efficient way of loading/storing an unaligned value? - * - * That is the subject of this file. Efficiency here is defined as - * minimum code size with minimum register usage for the common cases. - * It is currently not believed that long longs are common, so we - * trade efficiency for the chars, shorts and longs against the long - * longs. - * - * Current stats with gcc 2.7.2.2 for these functions: - * - * ptrsize get: code regs put: code regs - * 1 1 1 1 2 - * 2 3 2 3 2 - * 4 7 3 7 3 - * 8 20 6 16 6 - * - * gcc 2.95.1 seems to code differently: - * - * ptrsize get: code regs put: code regs - * 1 1 1 1 2 - * 2 3 2 3 2 - * 4 7 4 7 4 - * 8 19 8 15 6 - * - * which may or may not be more efficient (depending upon whether - * you can afford the extra registers). Hopefully the gcc 2.95 - * is inteligent enough to decide if it is better to use the - * extra register, but evidence so far seems to suggest otherwise. - * - * Unfortunately, gcc is not able to optimise the high word - * out of long long >> 32, or the low word from long long << 32 - */ - -#define __get_unaligned_2_le(__p) \ - (unsigned int)(__p[0] | __p[1] << 8) - -#define __get_unaligned_2_be(__p) \ - (unsigned int)(__p[0] << 8 | __p[1]) - -#define __get_unaligned_4_le(__p) \ - (unsigned int)(__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24) - -#define __get_unaligned_4_be(__p) \ - (unsigned int)(__p[0] << 24 | __p[1] << 16 | __p[2] << 8 | __p[3]) - -#define __get_unaligned_8_le(__p) \ - ((unsigned long long)__get_unaligned_4_le((__p+4)) << 32 | \ - __get_unaligned_4_le(__p)) - -#define __get_unaligned_8_be(__p) \ - ((unsigned long long)__get_unaligned_4_be(__p) << 32 | \ - __get_unaligned_4_be((__p+4))) - -#define __get_unaligned_le(ptr) \ - ((__force typeof(*(ptr)))({ \ - const __u8 *__p = (const __u8 *)(ptr); \ - __builtin_choose_expr(sizeof(*(ptr)) == 1, *__p, \ - __builtin_choose_expr(sizeof(*(ptr)) == 2, __get_unaligned_2_le(__p), \ - __builtin_choose_expr(sizeof(*(ptr)) == 4, __get_unaligned_4_le(__p), \ - __builtin_choose_expr(sizeof(*(ptr)) == 8, __get_unaligned_8_le(__p), \ - (void)__bug_unaligned_x(__p))))); \ - })) - -#define __get_unaligned_be(ptr) \ - ((__force typeof(*(ptr)))({ \ - const __u8 *__p = (const __u8 *)(ptr); \ - __builtin_choose_expr(sizeof(*(ptr)) == 1, *__p, \ - __builtin_choose_expr(sizeof(*(ptr)) == 2, __get_unaligned_2_be(__p), \ - __builtin_choose_expr(sizeof(*(ptr)) == 4, __get_unaligned_4_be(__p), \ - __builtin_choose_expr(sizeof(*(ptr)) == 8, __get_unaligned_8_be(__p), \ - (void)__bug_unaligned_x(__p))))); \ - })) - - -static inline void __put_unaligned_2_le(__u32 __v, register __u8 *__p) -{ - *__p++ = __v; - *__p++ = __v >> 8; -} - -static inline void __put_unaligned_2_be(__u32 __v, register __u8 *__p) -{ - *__p++ = __v >> 8; - *__p++ = __v; -} - -static inline void __put_unaligned_4_le(__u32 __v, register __u8 *__p) -{ - __put_unaligned_2_le(__v >> 16, __p + 2); - __put_unaligned_2_le(__v, __p); -} - -static inline void __put_unaligned_4_be(__u32 __v, register __u8 *__p) -{ - __put_unaligned_2_be(__v >> 16, __p); - __put_unaligned_2_be(__v, __p + 2); -} - -static inline void __put_unaligned_8_le(const unsigned long long __v, register __u8 *__p) -{ - /* - * tradeoff: 8 bytes of stack for all unaligned puts (2 - * instructions), or an extra register in the long long - * case - go for the extra register. - */ - __put_unaligned_4_le(__v >> 32, __p+4); - __put_unaligned_4_le(__v, __p); -} - -static inline void __put_unaligned_8_be(const unsigned long long __v, register __u8 *__p) -{ - /* - * tradeoff: 8 bytes of stack for all unaligned puts (2 - * instructions), or an extra register in the long long - * case - go for the extra register. - */ - __put_unaligned_4_be(__v >> 32, __p); - __put_unaligned_4_be(__v, __p+4); -} - -/* - * Try to store an unaligned value as efficiently as possible. - */ -#define __put_unaligned_le(val,ptr) \ - ({ \ - (void)sizeof(*(ptr) = (val)); \ - switch (sizeof(*(ptr))) { \ - case 1: \ - *(ptr) = (val); \ - break; \ - case 2: __put_unaligned_2_le((__force u16)(val),(__u8 *)(ptr)); \ - break; \ - case 4: __put_unaligned_4_le((__force u32)(val),(__u8 *)(ptr)); \ - break; \ - case 8: __put_unaligned_8_le((__force u64)(val),(__u8 *)(ptr)); \ - break; \ - default: __bug_unaligned_x(ptr); \ - break; \ - } \ - (void) 0; \ - }) - -#define __put_unaligned_be(val,ptr) \ - ({ \ - (void)sizeof(*(ptr) = (val)); \ - switch (sizeof(*(ptr))) { \ - case 1: \ - *(ptr) = (val); \ - break; \ - case 2: __put_unaligned_2_be((__force u16)(val),(__u8 *)(ptr)); \ - break; \ - case 4: __put_unaligned_4_be((__force u32)(val),(__u8 *)(ptr)); \ - break; \ - case 8: __put_unaligned_8_be((__force u64)(val),(__u8 *)(ptr)); \ - break; \ - default: __bug_unaligned_x(ptr); \ - break; \ - } \ - (void) 0; \ - }) +#include <linux/unaligned/le_byteshift.h> +#include <linux/unaligned/be_byteshift.h> +#include <linux/unaligned/generic.h> /* * Select endianness @@ -178,4 +16,4 @@ static inline void __put_unaligned_8_be(const unsigned long long __v, register _ #define put_unaligned __put_unaligned_be #endif -#endif +#endif /* _ASM_ARM_UNALIGNED_H */ diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h index 88e868b7aae..7c570082b1e 100644 --- a/include/asm-arm/unistd.h +++ b/include/asm-arm/unistd.h @@ -376,9 +376,11 @@ #define __NR_kexec_load (__NR_SYSCALL_BASE+347) #define __NR_utimensat (__NR_SYSCALL_BASE+348) #define __NR_signalfd (__NR_SYSCALL_BASE+349) -#define __NR_timerfd (__NR_SYSCALL_BASE+350) +#define __NR_timerfd_create (__NR_SYSCALL_BASE+350) #define __NR_eventfd (__NR_SYSCALL_BASE+351) #define __NR_fallocate (__NR_SYSCALL_BASE+352) +#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) +#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) /* * The following SWIs are ARM private. |