11 files changed, 0 insertions, 544 deletions

diff --git a/include/asm-avr32/arch-at32ap/at32ap700x.h b/include/asm-avr32/arch-at32ap/at32ap700x.h
deleted file mode 100644
index d18a3053be0..00000000000
--- a/include/asm-avr32/arch-at32ap/at32ap700x.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Pin definitions for AT32AP7000.
- *
- * Copyright (C) 2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_AT32AP700X_H__
-#define __ASM_ARCH_AT32AP700X_H__
-
-#define GPIO_PERIPH_A	0
-#define GPIO_PERIPH_B	1
-
-/*
- * Pin numbers identifying specific GPIO pins on the chip. They can
- * also be converted to IRQ numbers by passing them through
- * gpio_to_irq().
- */
-#define GPIO_PIOA_BASE	(0)
-#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
-#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
-#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
-#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
-
-#define GPIO_PIN_PA(N)	(GPIO_PIOA_BASE + (N))
-#define GPIO_PIN_PB(N)	(GPIO_PIOB_BASE + (N))
-#define GPIO_PIN_PC(N)	(GPIO_PIOC_BASE + (N))
-#define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
-#define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
-
-
-/*
- * DMAC peripheral hardware handshaking interfaces, used with dw_dmac
- */
-#define DMAC_MCI_RX		0
-#define DMAC_MCI_TX		1
-#define DMAC_DAC_TX		2
-#define DMAC_AC97_A_RX		3
-#define DMAC_AC97_A_TX		4
-#define DMAC_AC97_B_RX		5
-#define DMAC_AC97_B_TX		6
-#define DMAC_DMAREQ_0		7
-#define DMAC_DMAREQ_1		8
-#define DMAC_DMAREQ_2		9
-#define DMAC_DMAREQ_3		10
-
-#endif /* __ASM_ARCH_AT32AP700X_H__ */
diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h
deleted file mode 100644
index e60e9076544..00000000000
--- a/include/asm-avr32/arch-at32ap/board.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Platform data definitions.
- */
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <linux/types.h>
-
-#define GPIO_PIN_NONE	(-1)
-
-/*
- * Clock rates for various on-board oscillators. The number of entries
- * in this array is chip-dependent.
- */
-extern unsigned long at32_board_osc_rates[];
-  
-/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
-void at32_add_system_devices(void);
-
-#define ATMEL_MAX_UART	4
-extern struct platform_device *atmel_default_console_device;
-
-struct atmel_uart_data {
-	short		use_dma_tx;	/* use transmit DMA? */
-	short		use_dma_rx;	/* use receive DMA? */
-	void __iomem	*regs;		/* virtual base address, if any */
-};
-void at32_map_usart(unsigned int hw_id, unsigned int line);
-struct platform_device *at32_add_device_usart(unsigned int id);
-
-struct eth_platform_data {
-	u32	phy_mask;
-	u8	is_rmii;
-};
-struct platform_device *
-at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
-
-struct spi_board_info;
-struct platform_device *
-at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
-
-struct atmel_lcdfb_info;
-struct platform_device *
-at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-		     unsigned long fbmem_start, unsigned long fbmem_len,
-		     unsigned int pin_config);
-
-struct usba_platform_data;
-struct platform_device *
-at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
-
-struct ide_platform_data {
-	u8      cs;
-};
-struct platform_device *
-at32_add_device_ide(unsigned int id, unsigned int extint,
-		    struct ide_platform_data *data);
-
-/* mask says which PWM channels to mux */
-struct platform_device *at32_add_device_pwm(u32 mask);
-
-/* depending on what's hooked up, not all SSC pins will be used */
-#define	ATMEL_SSC_TK		0x01
-#define	ATMEL_SSC_TF		0x02
-#define	ATMEL_SSC_TD		0x04
-#define	ATMEL_SSC_TX		(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-
-#define	ATMEL_SSC_RK		0x10
-#define	ATMEL_SSC_RF		0x20
-#define	ATMEL_SSC_RD		0x40
-#define	ATMEL_SSC_RX		(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-
-struct platform_device *
-at32_add_device_ssc(unsigned int id, unsigned int flags);
-
-struct i2c_board_info;
-struct platform_device *at32_add_device_twi(unsigned int id,
-					    struct i2c_board_info *b,
-					    unsigned int n);
-
-struct mci_platform_data;
-struct platform_device *
-at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
-
-struct ac97c_platform_data {
-	unsigned short dma_rx_periph_id;
-	unsigned short dma_tx_periph_id;
-	unsigned short dma_controller_id;
-	int reset_pin;
-};
-struct platform_device *
-at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data);
-
-struct platform_device *at32_add_device_abdac(unsigned int id);
-struct platform_device *at32_add_device_psif(unsigned int id);
-
-struct cf_platform_data {
-	int	detect_pin;
-	int	reset_pin;
-	int	vcc_pin;
-	int	ready_pin;
-	u8	cs;
-};
-struct platform_device *
-at32_add_device_cf(unsigned int id, unsigned int extint,
-		struct cf_platform_data *data);
-
-/* NAND / SmartMedia */
-struct atmel_nand_data {
-	int	enable_pin;	/* chip enable */
-	int	det_pin;	/* card detect */
-	int	rdy_pin;	/* ready/busy */
-	u8	ale;		/* address line number connected to ALE */
-	u8	cle;		/* address line number connected to CLE */
-	u8	bus_width_16;	/* buswidth is 16 bit */
-	struct mtd_partition *(*partition_info)(int size, int *num_partitions);
-};
-struct platform_device *
-at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
-
-#endif /* __ASM_ARCH_BOARD_H */
diff --git a/include/asm-avr32/arch-at32ap/cpu.h b/include/asm-avr32/arch-at32ap/cpu.h
deleted file mode 100644
index 44d0bfa1f40..00000000000
--- a/include/asm-avr32/arch-at32ap/cpu.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * AVR32 and (fake) AT91 CPU identification
- *
- * Copyright (C) 2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_CPU_H
-#define __ASM_ARCH_CPU_H
-
-/*
- * Only AT32AP7000 is defined for now. We can identify the specific
- * chip at runtime, but I'm not sure if it's really worth it.
- */
-#ifdef CONFIG_CPU_AT32AP700X
-# define cpu_is_at32ap7000()	(1)
-#else
-# define cpu_is_at32ap7000()	(0)
-#endif
-
-/*
- * Since this is AVR32, we will never run on any AT91 CPU. But these
- * definitions may reduce clutter in common drivers.
- */
-#define cpu_is_at91rm9200()	(0)
-#define cpu_is_at91sam9xe()	(0)
-#define cpu_is_at91sam9260()	(0)
-#define cpu_is_at91sam9261()	(0)
-#define cpu_is_at91sam9263()	(0)
-#define cpu_is_at91sam9rl()	(0)
-#define cpu_is_at91cap9()	(0)
-
-#endif /* __ASM_ARCH_CPU_H */
diff --git a/include/asm-avr32/arch-at32ap/gpio.h b/include/asm-avr32/arch-at32ap/gpio.h
deleted file mode 100644
index 0180f584ef0..00000000000
--- a/include/asm-avr32/arch-at32ap/gpio.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __ASM_AVR32_ARCH_GPIO_H
-#define __ASM_AVR32_ARCH_GPIO_H
-
-#include <linux/compiler.h>
-#include <asm/irq.h>
-
-
-/* Some GPIO chips can manage IRQs; some can't.  The exact numbers can
- * be changed if needed, but for the moment they're not configurable.
- */
-#define ARCH_NR_GPIOS	(NR_GPIO_IRQS + 2 * 32)
-
-
-/* Arch-neutral GPIO API, supporting both "native" and external GPIOs. */
-#include <asm-generic/gpio.h>
-
-static inline int gpio_get_value(unsigned int gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned int gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned int gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-
-static inline int gpio_to_irq(unsigned int gpio)
-{
-	if (gpio < NR_GPIO_IRQS)
-		return gpio + GPIO_IRQ_BASE;
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return irq - GPIO_IRQ_BASE;
-}
-
-#endif /* __ASM_AVR32_ARCH_GPIO_H */
diff --git a/include/asm-avr32/arch-at32ap/init.h b/include/asm-avr32/arch-at32ap/init.h
deleted file mode 100644
index bc40e3d4615..00000000000
--- a/include/asm-avr32/arch-at32ap/init.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * AT32AP platform initialization calls.
- *
- * Copyright (C) 2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_AT32AP_INIT_H__
-#define __ASM_AVR32_AT32AP_INIT_H__
-
-void setup_platform(void);
-void setup_board(void);
-
-void at32_setup_serial_console(unsigned int usart_id);
-
-#endif /* __ASM_AVR32_AT32AP_INIT_H__ */
diff --git a/include/asm-avr32/arch-at32ap/io.h b/include/asm-avr32/arch-at32ap/io.h
deleted file mode 100644
index 4ec6abc68ea..00000000000
--- a/include/asm-avr32/arch-at32ap/io.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
-#define __ASM_AVR32_ARCH_AT32AP_IO_H
-
-/* For "bizarre" halfword swapping */
-#include <linux/byteorder/swabb.h>
-
-#if defined(CONFIG_AP700X_32_BIT_SMC)
-# define __swizzle_addr_b(addr)	(addr ^ 3UL)
-# define __swizzle_addr_w(addr)	(addr ^ 2UL)
-# define __swizzle_addr_l(addr)	(addr)
-# define ioswabb(a, x)		(x)
-# define ioswabw(a, x)		(x)
-# define ioswabl(a, x)		(x)
-# define __mem_ioswabb(a, x)	(x)
-# define __mem_ioswabw(a, x)	swab16(x)
-# define __mem_ioswabl(a, x)	swab32(x)
-#elif defined(CONFIG_AP700X_16_BIT_SMC)
-# define __swizzle_addr_b(addr)	(addr ^ 1UL)
-# define __swizzle_addr_w(addr)	(addr)
-# define __swizzle_addr_l(addr)	(addr)
-# define ioswabb(a, x)		(x)
-# define ioswabw(a, x)		(x)
-# define ioswabl(a, x)		swahw32(x)
-# define __mem_ioswabb(a, x)	(x)
-# define __mem_ioswabw(a, x)	swab16(x)
-# define __mem_ioswabl(a, x)	swahb32(x)
-#else
-# define __swizzle_addr_b(addr)	(addr)
-# define __swizzle_addr_w(addr)	(addr)
-# define __swizzle_addr_l(addr)	(addr)
-# define ioswabb(a, x)		(x)
-# define ioswabw(a, x)		swab16(x)
-# define ioswabl(a, x)		swab32(x)
-# define __mem_ioswabb(a, x)	(x)
-# define __mem_ioswabw(a, x)	(x)
-# define __mem_ioswabl(a, x)	(x)
-#endif
-
-#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */
diff --git a/include/asm-avr32/arch-at32ap/irq.h b/include/asm-avr32/arch-at32ap/irq.h
deleted file mode 100644
index 608e350368c..00000000000
--- a/include/asm-avr32/arch-at32ap/irq.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __ASM_AVR32_ARCH_IRQ_H
-#define __ASM_AVR32_ARCH_IRQ_H
-
-#define EIM_IRQ_BASE	NR_INTERNAL_IRQS
-#define NR_EIM_IRQS	32
-#define AT32_EXTINT(n)	(EIM_IRQ_BASE + (n))
-
-#define GPIO_IRQ_BASE	(EIM_IRQ_BASE + NR_EIM_IRQS)
-#define NR_GPIO_CTLR	(5 /*internal*/ + 1 /*external*/)
-#define NR_GPIO_IRQS	(NR_GPIO_CTLR * 32)
-
-#define NR_IRQS		(GPIO_IRQ_BASE + NR_GPIO_IRQS)
-
-#endif /* __ASM_AVR32_ARCH_IRQ_H */
diff --git a/include/asm-avr32/arch-at32ap/pm.h b/include/asm-avr32/arch-at32ap/pm.h
deleted file mode 100644
index 979b355b77b..00000000000
--- a/include/asm-avr32/arch-at32ap/pm.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * AVR32 AP Power Management.
- *
- * Copyright (C) 2008 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_ARCH_PM_H
-#define __ASM_AVR32_ARCH_PM_H
-
-/* Possible arguments to the "sleep" instruction */
-#define CPU_SLEEP_IDLE		0
-#define CPU_SLEEP_FROZEN	1
-#define CPU_SLEEP_STANDBY	2
-#define CPU_SLEEP_STOP		3
-#define CPU_SLEEP_STATIC	5
-
-#ifndef __ASSEMBLY__
-extern void cpu_enter_idle(void);
-extern void cpu_enter_standby(unsigned long sdramc_base);
-
-extern bool disable_idle_sleep;
-
-static inline void cpu_disable_idle_sleep(void)
-{
-	disable_idle_sleep = true;
-}
-
-static inline void cpu_enable_idle_sleep(void)
-{
-	disable_idle_sleep = false;
-}
-
-static inline void cpu_idle_sleep(void)
-{
-	/*
-	 * If we're using the COUNT and COMPARE registers for
-	 * timekeeping, we can't use the IDLE state.
-	 */
-	if (disable_idle_sleep)
-		cpu_relax();
-	else
-		cpu_enter_idle();
-}
-
-void intc_set_suspend_handler(unsigned long offset);
-#endif
-
-#endif /* __ASM_AVR32_ARCH_PM_H */
diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h
deleted file mode 100644
index b1abe6b4e4e..00000000000
--- a/include/asm-avr32/arch-at32ap/portmux.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * AT32 portmux interface.
- *
- * Copyright (C) 2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_PORTMUX_H__
-#define __ASM_ARCH_PORTMUX_H__
-
-/*
- * Set up pin multiplexing, called from board init only.
- *
- * The following flags determine the initial state of the pin.
- */
-#define AT32_GPIOF_PULLUP	0x00000001	/* (not-OUT) Enable pull-up */
-#define AT32_GPIOF_OUTPUT	0x00000002	/* (OUT) Enable output driver */
-#define AT32_GPIOF_HIGH		0x00000004	/* (OUT) Set output high */
-#define AT32_GPIOF_DEGLITCH	0x00000008	/* (IN) Filter glitches */
-#define AT32_GPIOF_MULTIDRV	0x00000010	/* Enable multidriver option */
-
-void at32_select_periph(unsigned int pin, unsigned int periph,
-			unsigned long flags);
-void at32_select_gpio(unsigned int pin, unsigned long flags);
-void at32_reserve_pin(unsigned int pin);
-
-#endif /* __ASM_ARCH_PORTMUX_H__ */
diff --git a/include/asm-avr32/arch-at32ap/smc.h b/include/asm-avr32/arch-at32ap/smc.h
deleted file mode 100644
index c98eea44a70..00000000000
--- a/include/asm-avr32/arch-at32ap/smc.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Static Memory Controller for AT32 chips
- *
- * Copyright (C) 2006 Atmel Corporation
- *
- * Inspired by the OMAP2 General-Purpose Memory Controller interface
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_AT32AP_SMC_H
-#define __ARCH_AT32AP_SMC_H
-
-/*
- * All timing parameters are in nanoseconds.
- */
-struct smc_timing {
-	/* Delay from address valid to assertion of given strobe */
-	int ncs_read_setup;
-	int nrd_setup;
-	int ncs_write_setup;
-	int nwe_setup;
-
-	/* Pulse length of given strobe */
-	int ncs_read_pulse;
-	int nrd_pulse;
-	int ncs_write_pulse;
-	int nwe_pulse;
-
-	/* Total cycle length of given operation */
-	int read_cycle;
-	int write_cycle;
-
-	/* Minimal recovery times, will extend cycle if needed */
-	int ncs_read_recover;
-	int nrd_recover;
-	int ncs_write_recover;
-	int nwe_recover;
-};
-
-/*
- * All timing parameters are in clock cycles.
- */
-struct smc_config {
-
-	/* Delay from address valid to assertion of given strobe */
-	u8		ncs_read_setup;
-	u8		nrd_setup;
-	u8		ncs_write_setup;
-	u8		nwe_setup;
-
-	/* Pulse length of given strobe */
-	u8		ncs_read_pulse;
-	u8		nrd_pulse;
-	u8		ncs_write_pulse;
-	u8		nwe_pulse;
-
-	/* Total cycle length of given operation */
-	u8		read_cycle;
-	u8		write_cycle;
-
-	/* Bus width in bytes */
-	u8		bus_width;
-
-	/*
-	 * 0: Data is sampled on rising edge of NCS
-	 * 1: Data is sampled on rising edge of NRD
-	 */
-	unsigned int	nrd_controlled:1;
-
-	/*
-	 * 0: Data is driven on falling edge of NCS
-	 * 1: Data is driven on falling edge of NWR
-	 */
-	unsigned int	nwe_controlled:1;
-
-	/*
-	 * 0: NWAIT is disabled
-	 * 1: Reserved
-	 * 2: NWAIT is frozen mode
-	 * 3: NWAIT in ready mode
-	 */
-	unsigned int	nwait_mode:2;
-
-	/*
-	 * 0: Byte select access type
-	 * 1: Byte write access type
-	 */
-	unsigned int	byte_write:1;
-
-	/*
-	 * Number of clock cycles before data is released after
-	 * the rising edge of the read controlling signal
-	 *
-	 * Total cycles from SMC is tdf_cycles + 1
-	 */
-	unsigned int	tdf_cycles:4;
-
-	/*
-	 * 0: TDF optimization disabled
-	 * 1: TDF optimization enabled
-	 */
-	unsigned int	tdf_mode:1;
-};
-
-extern void smc_set_timing(struct smc_config *config,
-			   const struct smc_timing *timing);
-
-extern int smc_set_configuration(int cs, const struct smc_config *config);
-extern struct smc_config *smc_get_configuration(int cs);
-
-#endif /* __ARCH_AT32AP_SMC_H */
diff --git a/include/asm-avr32/arch-at32ap/sram.h b/include/asm-avr32/arch-at32ap/sram.h
deleted file mode 100644
index 4838dae7601..00000000000
--- a/include/asm-avr32/arch-at32ap/sram.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Simple SRAM allocator
- *
- * Copyright (C) 2008 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_AVR32_ARCH_SRAM_H
-#define __ASM_AVR32_ARCH_SRAM_H
-
-#include <linux/genalloc.h>
-
-extern struct gen_pool *sram_pool;
-
-static inline unsigned long sram_alloc(size_t len)
-{
-	if (!sram_pool)
-		return 0UL;
-
-	return gen_pool_alloc(sram_pool, len);
-}
-
-static inline void sram_free(unsigned long addr, size_t len)
-{
-	return gen_pool_free(sram_pool, addr, len);
-}
-
-#endif /* __ASM_AVR32_ARCH_SRAM_H */