aboutsummaryrefslogtreecommitdiff
path: root/include/asm-blackfin/mach-bf527/anomaly.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-blackfin/mach-bf527/anomaly.h')
-rw-r--r--include/asm-blackfin/mach-bf527/anomaly.h102
1 files changed, 0 insertions, 102 deletions
diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h
deleted file mode 100644
index 4725268a5ad..00000000000
--- a/include/asm-blackfin/mach-bf527/anomaly.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * File: include/asm-blackfin/mach-bf527/anomaly.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * Copyright (C) 2004-2008 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
- */
-
-/* This file shoule be up to date with:
- * - Revision C, 01/25/2008; ADSP-BF527 Blackfin Processor Anomaly List
- */
-
-#ifndef _MACH_ANOMALY_H_
-#define _MACH_ANOMALY_H_
-
-/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
-#define ANOMALY_05000074 (1)
-/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
-#define ANOMALY_05000119 (1)
-/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
-#define ANOMALY_05000122 (1)
-/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
-#define ANOMALY_05000245 (1)
-/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
-#define ANOMALY_05000265 (1)
-/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
-#define ANOMALY_05000312 (1)
-/* Incorrect Access of OTP_STATUS During otp_write() Function */
-#define ANOMALY_05000328 (1)
-/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000337 (1)
-/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
-#define ANOMALY_05000341 (1)
-/* TWI May Not Operate Correctly Under Certain Signal Termination Conditions */
-#define ANOMALY_05000342 (1)
-/* USB Calibration Value Is Not Initialized */
-#define ANOMALY_05000346 (1)
-/* Preboot Routine Incorrectly Alters Reset Value of USB Register */
-#define ANOMALY_05000347 (1)
-/* Security Features Are Not Functional */
-#define ANOMALY_05000348 (__SILICON_REVISION__ < 1)
-/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
-#define ANOMALY_05000355 (1)
-/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
-/* Incorrect Revision Number in DSPID Register */
-#define ANOMALY_05000364 (__SILICON_REVISION__ > 0)
-/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
-#define ANOMALY_05000366 (1)
-/* New Feature: Higher Default CCLK Rate */
-#define ANOMALY_05000368 (1)
-/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
-/* Authentication Fails To Initiate */
-#define ANOMALY_05000376 (__SILICON_REVISION__ > 0)
-/* Data Read From L3 Memory by USB DMA May be Corrupted */
-#define ANOMALY_05000380 (1)
-/* USB Full-speed Mode not Fully Tested */
-#define ANOMALY_05000381 (1)
-/* New Feature: Boot from OTP Memory */
-#define ANOMALY_05000385 (1)
-/* New Feature: bfrom_SysControl() Routine */
-#define ANOMALY_05000386 (1)
-/* New Feature: Programmable Preboot Settings */
-#define ANOMALY_05000387 (1)
-/* Reset Vector Must Not Be in SDRAM Memory Space */
-#define ANOMALY_05000389 (1)
-/* New Feature: pTempCurrent Added to ADI_BOOT_DATA Structure */
-#define ANOMALY_05000392 (1)
-/* New Feature: dTempByteCount Value Increased in ADI_BOOT_DATA Structure */
-#define ANOMALY_05000393 (1)
-/* New Feature: Log Buffer Functionality */
-#define ANOMALY_05000394 (1)
-/* New Feature: Hook Routine Functionality */
-#define ANOMALY_05000395 (1)
-/* New Feature: Header Indirect Bit */
-#define ANOMALY_05000396 (1)
-/* New Feature: BK_ONES, BK_ZEROS, and BK_DATECODE Constants */
-#define ANOMALY_05000397 (1)
-/* New Feature: SWRESET, DFRESET and WDRESET Bits Added to SYSCR Register */
-#define ANOMALY_05000398 (1)
-/* New Feature: BCODE_NOBOOT Added to BCODE Field of SYSCR Register */
-#define ANOMALY_05000399 (1)
-/* PPI Data Signals D0 and D8 do not Tristate After Disabling PPI */
-#define ANOMALY_05000401 (1)
-
-/* Anomalies that don't exist on this proc */
-#define ANOMALY_05000125 (0)
-#define ANOMALY_05000158 (0)
-#define ANOMALY_05000183 (0)
-#define ANOMALY_05000198 (0)
-#define ANOMALY_05000230 (0)
-#define ANOMALY_05000244 (0)
-#define ANOMALY_05000261 (0)
-#define ANOMALY_05000263 (0)
-#define ANOMALY_05000266 (0)
-#define ANOMALY_05000273 (0)
-#define ANOMALY_05000311 (0)
-#define ANOMALY_05000323 (0)
-#define ANOMALY_05000363 (0)
-
-#endif