1 files changed, 0 insertions, 313 deletions
diff --git a/include/asm-i386/system.h b/include/asm-i386/system.h
deleted file mode 100644
index d69ba937e09..00000000000
--- a/include/asm-i386/system.h
+++ /dev/null
@@ -1,313 +0,0 @@
-#ifndef __ASM_SYSTEM_H
-#define __ASM_SYSTEM_H
-
-#include <linux/kernel.h>
-#include <asm/segment.h>
-#include <asm/cpufeature.h>
-#include <asm/cmpxchg.h>
-
-#ifdef __KERNEL__
-
-struct task_struct;	/* one of the stranger aspects of C forward declarations.. */
-extern struct task_struct * FASTCALL(__switch_to(struct task_struct *prev, struct task_struct *next));
-
-/*
- * Saving eflags is important. It switches not only IOPL between tasks,
- * it also protects other tasks from NT leaking through sysenter etc.
- */
-#define switch_to(prev,next,last) do {					\
-	unsigned long esi,edi;						\
-	asm volatile("pushfl\n\t"		/* Save flags */	\
-		     "pushl %%ebp\n\t"					\
-		     "movl %%esp,%0\n\t"	/* save ESP */		\
-		     "movl %5,%%esp\n\t"	/* restore ESP */	\
-		     "movl $1f,%1\n\t"		/* save EIP */		\
-		     "pushl %6\n\t"		/* restore EIP */	\
-		     "jmp __switch_to\n"				\
-		     "1:\t"						\
-		     "popl %%ebp\n\t"					\
-		     "popfl"						\
-		     :"=m" (prev->thread.esp),"=m" (prev->thread.eip),	\
-		      "=a" (last),"=S" (esi),"=D" (edi)			\
-		     :"m" (next->thread.esp),"m" (next->thread.eip),	\
-		      "2" (prev), "d" (next));				\
-} while (0)
-
-#define _set_base(addr,base) do { unsigned long __pr; \
-__asm__ __volatile__ ("movw %%dx,%1\n\t" \
-	"rorl $16,%%edx\n\t" \
-	"movb %%dl,%2\n\t" \
-	"movb %%dh,%3" \
-	:"=&d" (__pr) \
-	:"m" (*((addr)+2)), \
-	 "m" (*((addr)+4)), \
-	 "m" (*((addr)+7)), \
-         "0" (base) \
-        ); } while(0)
-
-#define _set_limit(addr,limit) do { unsigned long __lr; \
-__asm__ __volatile__ ("movw %%dx,%1\n\t" \
-	"rorl $16,%%edx\n\t" \
-	"movb %2,%%dh\n\t" \
-	"andb $0xf0,%%dh\n\t" \
-	"orb %%dh,%%dl\n\t" \
-	"movb %%dl,%2" \
-	:"=&d" (__lr) \
-	:"m" (*(addr)), \
-	 "m" (*((addr)+6)), \
-	 "0" (limit) \
-        ); } while(0)
-
-#define set_base(ldt,base) _set_base( ((char *)&(ldt)) , (base) )
-#define set_limit(ldt,limit) _set_limit( ((char *)&(ldt)) , ((limit)-1) )
-
-/*
- * Load a segment. Fall back on loading the zero
- * segment if something goes wrong..
- */
-#define loadsegment(seg,value)			\
-	asm volatile("\n"			\
-		"1:\t"				\
-		"mov %0,%%" #seg "\n"		\
-		"2:\n"				\
-		".section .fixup,\"ax\"\n"	\
-		"3:\t"				\
-		"pushl $0\n\t"			\
-		"popl %%" #seg "\n\t"		\
-		"jmp 2b\n"			\
-		".previous\n"			\
-		".section __ex_table,\"a\"\n\t"	\
-		".align 4\n\t"			\
-		".long 1b,3b\n"			\
-		".previous"			\
-		: :"rm" (value))
-
-/*
- * Save a segment register away
- */
-#define savesegment(seg, value) \
-	asm volatile("mov %%" #seg ",%0":"=rm" (value))
-
-
-static inline void native_clts(void)
-{
-	asm volatile ("clts");
-}
-
-static inline unsigned long native_read_cr0(void)
-{
-	unsigned long val;
-	asm volatile("movl %%cr0,%0\n\t" :"=r" (val));
-	return val;
-}
-
-static inline void native_write_cr0(unsigned long val)
-{
-	asm volatile("movl %0,%%cr0": :"r" (val));
-}
-
-static inline unsigned long native_read_cr2(void)
-{
-	unsigned long val;
-	asm volatile("movl %%cr2,%0\n\t" :"=r" (val));
-	return val;
-}
-
-static inline void native_write_cr2(unsigned long val)
-{
-	asm volatile("movl %0,%%cr2": :"r" (val));
-}
-
-static inline unsigned long native_read_cr3(void)
-{
-	unsigned long val;
-	asm volatile("movl %%cr3,%0\n\t" :"=r" (val));
-	return val;
-}
-
-static inline void native_write_cr3(unsigned long val)
-{
-	asm volatile("movl %0,%%cr3": :"r" (val));
-}
-
-static inline unsigned long native_read_cr4(void)
-{
-	unsigned long val;
-	asm volatile("movl %%cr4,%0\n\t" :"=r" (val));
-	return val;
-}
-
-static inline unsigned long native_read_cr4_safe(void)
-{
-	unsigned long val;
-	/* This could fault if %cr4 does not exist */
-	asm("1: movl %%cr4, %0		\n"
-		"2:				\n"
-		".section __ex_table,\"a\"	\n"
-		".long 1b,2b			\n"
-		".previous			\n"
-		: "=r" (val): "0" (0));
-	return val;
-}
-
-static inline void native_write_cr4(unsigned long val)
-{
-	asm volatile("movl %0,%%cr4": :"r" (val));
-}
-
-static inline void native_wbinvd(void)
-{
-	asm volatile("wbinvd": : :"memory");
-}
-
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define read_cr0()	(native_read_cr0())
-#define write_cr0(x)	(native_write_cr0(x))
-#define read_cr2()	(native_read_cr2())
-#define write_cr2(x)	(native_write_cr2(x))
-#define read_cr3()	(native_read_cr3())
-#define write_cr3(x)	(native_write_cr3(x))
-#define read_cr4()	(native_read_cr4())
-#define read_cr4_safe()	(native_read_cr4_safe())
-#define write_cr4(x)	(native_write_cr4(x))
-#define wbinvd()	(native_wbinvd())
-
-/* Clear the 'TS' bit */
-#define clts()		(native_clts())
-
-#endif/* CONFIG_PARAVIRT */
-
-/* Set the 'TS' bit */
-#define stts() write_cr0(8 | read_cr0())
-
-#endif	/* __KERNEL__ */
-
-static inline unsigned long get_limit(unsigned long segment)
-{
-	unsigned long __limit;
-	__asm__("lsll %1,%0"
-		:"=r" (__limit):"r" (segment));
-	return __limit+1;
-}
-
-#define nop() __asm__ __volatile__ ("nop")
-
-/*
- * Force strict CPU ordering.
- * And yes, this is required on UP too when we're talking
- * to devices.
- *
- * For now, "wmb()" doesn't actually do anything, as all
- * Intel CPU's follow what Intel calls a *Processor Order*,
- * in which all writes are seen in the program order even
- * outside the CPU.
- *
- * I expect future Intel CPU's to have a weaker ordering,
- * but I'd also expect them to finally get their act together
- * and add some real memory barriers if so.
- *
- * Some non intel clones support out of order store. wmb() ceases to be a
- * nop for these.
- */
- 
-
-#define mb() alternative("lock; addl $0,0(%%esp)", "mfence", X86_FEATURE_XMM2)
-#define rmb() alternative("lock; addl $0,0(%%esp)", "lfence", X86_FEATURE_XMM2)
-
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier.  All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads.  This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies.  See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	b = 2;
- *	memory_barrier();
- *	p = &b;				q = p;
- *					read_barrier_depends();
- *					d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends().  However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	a = 2;
- *	memory_barrier();
- *	b = 3;				y = b;
- *					read_barrier_depends();
- *					x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b".  Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
- * in cases like this where there are no data dependencies.
- **/
-
-#define read_barrier_depends()	do { } while(0)
-
-#ifdef CONFIG_X86_OOSTORE
-/* Actually there are no OOO store capable CPUs for now that do SSE, 
-   but make it already an possibility. */
-#define wmb() alternative("lock; addl $0,0(%%esp)", "sfence", X86_FEATURE_XMM)
-#else
-#define wmb()	__asm__ __volatile__ ("": : :"memory")
-#endif
-
-#ifdef CONFIG_SMP
-#define smp_mb()	mb()
-#define smp_rmb()	rmb()
-#define smp_wmb()	wmb()
-#define smp_read_barrier_depends()	read_barrier_depends()
-#define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
-#else
-#define smp_mb()	barrier()
-#define smp_rmb()	barrier()
-#define smp_wmb()	barrier()
-#define smp_read_barrier_depends()	do { } while(0)
-#define set_mb(var, value) do { var = value; barrier(); } while (0)
-#endif
-
-#include <linux/irqflags.h>
-
-/*
- * disable hlt during certain critical i/o operations
- */
-#define HAVE_DISABLE_HLT
-void disable_hlt(void);
-void enable_hlt(void);
-
-extern int es7000_plat;
-void cpu_idle_wait(void);
-
-extern unsigned long arch_align_stack(unsigned long sp);
-extern void free_init_pages(char *what, unsigned long begin, unsigned long end);
-
-void default_idle(void);
-
-#endif