aboutsummaryrefslogtreecommitdiff
path: root/include/asm-i386
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-i386')
-rw-r--r--include/asm-i386/paravirt.h75
-rw-r--r--include/asm-i386/pgtable-2level.h5
-rw-r--r--include/asm-i386/pgtable-3level.h40
-rw-r--r--include/asm-i386/pgtable.h4
-rw-r--r--include/asm-i386/tlbflush.h18
5 files changed, 116 insertions, 26 deletions
diff --git a/include/asm-i386/paravirt.h b/include/asm-i386/paravirt.h
index e2c803fadb1..9f06265065f 100644
--- a/include/asm-i386/paravirt.h
+++ b/include/asm-i386/paravirt.h
@@ -4,6 +4,7 @@
* para-virtualization: those hooks are defined here. */
#include <linux/linkage.h>
#include <linux/stringify.h>
+#include <asm/page.h>
#ifdef CONFIG_PARAVIRT
/* These are the most performance critical ops, so we want to be able to patch
@@ -27,6 +28,7 @@
struct thread_struct;
struct Xgt_desc_struct;
struct tss_struct;
+struct mm_struct;
struct paravirt_ops
{
unsigned int kernel_rpl;
@@ -121,6 +123,23 @@ struct paravirt_ops
unsigned long (fastcall *apic_read)(unsigned long reg);
#endif
+ void (fastcall *flush_tlb_user)(void);
+ void (fastcall *flush_tlb_kernel)(void);
+ void (fastcall *flush_tlb_single)(u32 addr);
+
+ void (fastcall *set_pte)(pte_t *ptep, pte_t pteval);
+ void (fastcall *set_pte_at)(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pteval);
+ void (fastcall *set_pmd)(pmd_t *pmdp, pmd_t pmdval);
+ void (fastcall *pte_update)(struct mm_struct *mm, u32 addr, pte_t *ptep);
+ void (fastcall *pte_update_defer)(struct mm_struct *mm, u32 addr, pte_t *ptep);
+#ifdef CONFIG_X86_PAE
+ void (fastcall *set_pte_atomic)(pte_t *ptep, pte_t pteval);
+ void (fastcall *set_pte_present)(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte);
+ void (fastcall *set_pud)(pud_t *pudp, pud_t pudval);
+ void (fastcall *pte_clear)(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+ void (fastcall *pmd_clear)(pmd_t *pmdp);
+#endif
+
/* These two are jmp to, not actually called. */
void (fastcall *irq_enable_sysexit)(void);
void (fastcall *iret)(void);
@@ -297,6 +316,62 @@ static inline unsigned long apic_read(unsigned long reg)
#endif
+#define __flush_tlb() paravirt_ops.flush_tlb_user()
+#define __flush_tlb_global() paravirt_ops.flush_tlb_kernel()
+#define __flush_tlb_single(addr) paravirt_ops.flush_tlb_single(addr)
+
+static inline void set_pte(pte_t *ptep, pte_t pteval)
+{
+ paravirt_ops.set_pte(ptep, pteval);
+}
+
+static inline void set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pteval)
+{
+ paravirt_ops.set_pte_at(mm, addr, ptep, pteval);
+}
+
+static inline void set_pmd(pmd_t *pmdp, pmd_t pmdval)
+{
+ paravirt_ops.set_pmd(pmdp, pmdval);
+}
+
+static inline void pte_update(struct mm_struct *mm, u32 addr, pte_t *ptep)
+{
+ paravirt_ops.pte_update(mm, addr, ptep);
+}
+
+static inline void pte_update_defer(struct mm_struct *mm, u32 addr, pte_t *ptep)
+{
+ paravirt_ops.pte_update_defer(mm, addr, ptep);
+}
+
+#ifdef CONFIG_X86_PAE
+static inline void set_pte_atomic(pte_t *ptep, pte_t pteval)
+{
+ paravirt_ops.set_pte_atomic(ptep, pteval);
+}
+
+static inline void set_pte_present(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
+{
+ paravirt_ops.set_pte_present(mm, addr, ptep, pte);
+}
+
+static inline void set_pud(pud_t *pudp, pud_t pudval)
+{
+ paravirt_ops.set_pud(pudp, pudval);
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+ paravirt_ops.pte_clear(mm, addr, ptep);
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+ paravirt_ops.pmd_clear(pmdp);
+}
+#endif
+
/* These all sit in the .parainstructions section to tell us what to patch. */
struct paravirt_patch {
u8 *instr; /* original instructions */
diff --git a/include/asm-i386/pgtable-2level.h b/include/asm-i386/pgtable-2level.h
index 8d8d3b9ecdb..04d6186abc2 100644
--- a/include/asm-i386/pgtable-2level.h
+++ b/include/asm-i386/pgtable-2level.h
@@ -13,11 +13,14 @@
* within a page table are directly modified. Thus, the following
* hook is made available.
*/
+#ifndef CONFIG_PARAVIRT
#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = (pmdval))
+#endif
+
#define set_pte_atomic(pteptr, pteval) set_pte(pteptr,pteval)
#define set_pte_present(mm,addr,ptep,pteval) set_pte_at(mm,addr,ptep,pteval)
-#define set_pmd(pmdptr, pmdval) (*(pmdptr) = (pmdval))
#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
diff --git a/include/asm-i386/pgtable-3level.h b/include/asm-i386/pgtable-3level.h
index c2d701ea35b..2a6e67db8bc 100644
--- a/include/asm-i386/pgtable-3level.h
+++ b/include/asm-i386/pgtable-3level.h
@@ -44,6 +44,7 @@ static inline int pte_exec_kernel(pte_t pte)
return pte_x(pte);
}
+#ifndef CONFIG_PARAVIRT
/* Rules for using set_pte: the pte being assigned *must* be
* either not present or in a state where the hardware will
* not attempt to update the pte. In places where this is
@@ -81,25 +82,6 @@ static inline void set_pte_present(struct mm_struct *mm, unsigned long addr, pte
(*(pudptr) = (pudval))
/*
- * Pentium-II erratum A13: in PAE mode we explicitly have to flush
- * the TLB via cr3 if the top-level pgd is changed...
- * We do not let the generic code free and clear pgd entries due to
- * this erratum.
- */
-static inline void pud_clear (pud_t * pud) { }
-
-#define pud_page(pud) \
-((struct page *) __va(pud_val(pud) & PAGE_MASK))
-
-#define pud_page_vaddr(pud) \
-((unsigned long) __va(pud_val(pud) & PAGE_MASK))
-
-
-/* Find an entry in the second-level page table.. */
-#define pmd_offset(pud, address) ((pmd_t *) pud_page(*(pud)) + \
- pmd_index(address))
-
-/*
* For PTEs and PDEs, we must clear the P-bit first when clearing a page table
* entry, so clear the bottom half first and enforce ordering with a compiler
* barrier.
@@ -118,6 +100,26 @@ static inline void pmd_clear(pmd_t *pmd)
smp_wmb();
*(tmp + 1) = 0;
}
+#endif
+
+/*
+ * Pentium-II erratum A13: in PAE mode we explicitly have to flush
+ * the TLB via cr3 if the top-level pgd is changed...
+ * We do not let the generic code free and clear pgd entries due to
+ * this erratum.
+ */
+static inline void pud_clear (pud_t * pud) { }
+
+#define pud_page(pud) \
+((struct page *) __va(pud_val(pud) & PAGE_MASK))
+
+#define pud_page_vaddr(pud) \
+((unsigned long) __va(pud_val(pud) & PAGE_MASK))
+
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(pud, address) ((pmd_t *) pud_page(*(pud)) + \
+ pmd_index(address))
#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h
index 7d398f493dd..efd7d90789d 100644
--- a/include/asm-i386/pgtable.h
+++ b/include/asm-i386/pgtable.h
@@ -15,6 +15,7 @@
#include <asm/processor.h>
#include <asm/fixmap.h>
#include <linux/threads.h>
+#include <asm/paravirt.h>
#ifndef _I386_BITOPS_H
#include <asm/bitops.h>
@@ -246,6 +247,7 @@ static inline pte_t pte_mkhuge(pte_t pte) { (pte).pte_low |= _PAGE_PSE; return p
# include <asm/pgtable-2level.h>
#endif
+#ifndef CONFIG_PARAVIRT
/*
* Rules for using pte_update - it must be called after any PTE update which
* has not been done using the set_pte / clear_pte interfaces. It is used by
@@ -261,7 +263,7 @@ static inline pte_t pte_mkhuge(pte_t pte) { (pte).pte_low |= _PAGE_PSE; return p
*/
#define pte_update(mm, addr, ptep) do { } while (0)
#define pte_update_defer(mm, addr, ptep) do { } while (0)
-
+#endif
/*
* We only update the dirty/accessed state if we set
diff --git a/include/asm-i386/tlbflush.h b/include/asm-i386/tlbflush.h
index 360648b0f2b..4dd82840d53 100644
--- a/include/asm-i386/tlbflush.h
+++ b/include/asm-i386/tlbflush.h
@@ -4,7 +4,15 @@
#include <linux/mm.h>
#include <asm/processor.h>
-#define __flush_tlb() \
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#define __flush_tlb() __native_flush_tlb()
+#define __flush_tlb_global() __native_flush_tlb_global()
+#define __flush_tlb_single(addr) __native_flush_tlb_single(addr)
+#endif
+
+#define __native_flush_tlb() \
do { \
unsigned int tmpreg; \
\
@@ -19,7 +27,7 @@
* Global pages have to be flushed a bit differently. Not a real
* performance problem because this does not happen often.
*/
-#define __flush_tlb_global() \
+#define __native_flush_tlb_global() \
do { \
unsigned int tmpreg, cr4, cr4_orig; \
\
@@ -36,6 +44,9 @@
: "memory"); \
} while (0)
+#define __native_flush_tlb_single(addr) \
+ __asm__ __volatile__("invlpg (%0)" ::"r" (addr) : "memory")
+
# define __flush_tlb_all() \
do { \
if (cpu_has_pge) \
@@ -46,9 +57,6 @@
#define cpu_has_invlpg (boot_cpu_data.x86 > 3)
-#define __flush_tlb_single(addr) \
- __asm__ __volatile__("invlpg (%0)" ::"r" (addr) : "memory")
-
#ifdef CONFIG_X86_INVLPG
# define __flush_tlb_one(addr) __flush_tlb_single(addr)
#else