diff options
Diffstat (limited to 'include/asm-mips/mach-pb1x00/pb1550.h')
| -rw-r--r-- | include/asm-mips/mach-pb1x00/pb1550.h | 51 |
1 files changed, 26 insertions, 25 deletions
diff --git a/include/asm-mips/mach-pb1x00/pb1550.h b/include/asm-mips/mach-pb1x00/pb1550.h index c2ab0e2df4a..6704a11497d 100644 --- a/include/asm-mips/mach-pb1x00/pb1550.h +++ b/include/asm-mips/mach-pb1x00/pb1550.h @@ -30,15 +30,15 @@ #include <linux/types.h> #include <asm/mach-au1x00/au1xxx_psc.h> -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX +#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX +#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX +#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX +#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define AC97_PSC_BASE PSC1_BASE_ADDR -#define SMBUS_PSC_BASE PSC2_BASE_ADDR -#define I2S_PSC_BASE PSC3_BASE_ADDR +#define SPI_PSC_BASE PSC0_BASE_ADDR +#define AC97_PSC_BASE PSC1_BASE_ADDR +#define SMBUS_PSC_BASE PSC2_BASE_ADDR +#define I2S_PSC_BASE PSC3_BASE_ADDR #define BCSR_PHYS_ADDR 0xAF000000 @@ -129,12 +129,12 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; #define BCSR_SYSTEM_POWEROFF 0x4000 #define BCSR_SYSTEM_RESET 0x8000 -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1) +#define PCMCIA_MAX_SOCK 1 +#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) /* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8)) +#define SET_VCC_VPP(VCC, VPP, SLOT) \ + ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) #if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER) #define PB1550_BOTH_BANKS @@ -144,16 +144,17 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; #define PB1550_USER_ONLY #endif -/* Timing values as described in databook, * ns value stripped of +/* + * Timing values as described in databook, * ns value stripped of * lower 2 bits. * These defines are here rather than an SOC1550 generic file because * the parts chosen on another board may be different and may require * different timings. */ -#define NAND_T_H (18 >> 2) -#define NAND_T_PUL (30 >> 2) -#define NAND_T_SU (30 >> 2) -#define NAND_T_WH (30 >> 2) +#define NAND_T_H (18 >> 2) +#define NAND_T_PUL (30 >> 2) +#define NAND_T_SU (30 >> 2) +#define NAND_T_WH (30 >> 2) /* Bitfield shift amounts */ #define NAND_T_H_SHIFT 0 @@ -161,16 +162,16 @@ static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; #define NAND_T_SU_SHIFT 8 #define NAND_T_WH_SHIFT 12 -#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ - ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ - ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ - ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT) +#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \ + ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \ + ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \ + ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)) #define NAND_CS 1 -/* should be done by yamon */ -#define NAND_STCFG 0x00400005 /* 8-bit NAND */ -#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */ -#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ +/* Should be done by YAMON */ +#define NAND_STCFG 0x00400005 /* 8-bit NAND */ +#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */ +#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */ #endif /* __ASM_PB1550_H */ |