diff options
Diffstat (limited to 'include/asm-mips/mips-boards')
| -rw-r--r-- | include/asm-mips/mips-boards/atlas.h | 80 | ||||
| -rw-r--r-- | include/asm-mips/mips-boards/atlasint.h | 109 | ||||
| -rw-r--r-- | include/asm-mips/mips-boards/maltasmp.h | 36 | ||||
| -rw-r--r-- | include/asm-mips/mips-boards/saa9730_uart.h | 69 | ||||
| -rw-r--r-- | include/asm-mips/mips-boards/sead.h | 36 | ||||
| -rw-r--r-- | include/asm-mips/mips-boards/seadint.h | 28 |
6 files changed, 0 insertions, 358 deletions
diff --git a/include/asm-mips/mips-boards/atlas.h b/include/asm-mips/mips-boards/atlas.h deleted file mode 100644 index a8ae12d120e..00000000000 --- a/include/asm-mips/mips-boards/atlas.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Defines of the Atlas board specific address-MAP, registers, etc. - * - */ -#ifndef _MIPS_ATLAS_H -#define _MIPS_ATLAS_H - -#include <asm/addrspace.h> - -/* - * Atlas RTC-device indirect register access. - */ -#define ATLAS_RTC_ADR_REG 0x1f000800 -#define ATLAS_RTC_DAT_REG 0x1f000808 - -/* - * Atlas interrupt controller register base. - */ -#define ATLAS_ICTRL_REGS_BASE 0x1f000000 - -/* - * Atlas registers are memory mapped on 64-bit aligned boundaries and - * only word access are allowed. - */ -struct atlas_ictrl_regs { - volatile unsigned int intraw; - int dummy1; - volatile unsigned int intseten; - int dummy2; - volatile unsigned int intrsten; - int dummy3; - volatile unsigned int intenable; - int dummy4; - volatile unsigned int intstatus; - int dummy5; -}; - -/* - * Atlas UART register base. - */ -#define ATLAS_UART_REGS_BASE 0x1f000900 -#define ATLAS_BASE_BAUD ( 3686400 / 16 ) - -/* - * Atlas PSU standby register. - */ -#define ATLAS_PSUSTBY_REG 0x1f000600 -#define ATLAS_GOSTBY 0x4d - -/* - * We make a universal assumption about the way the bootloader (YAMON) - * have located the Philips SAA9730 chip. - * This is not ideal, but is needed for setting up remote debugging as - * soon as possible. - */ -#define ATLAS_SAA9730_REG 0x10800000 - -#define ATLAS_SAA9730_BAUDCLOCK 3692300 - -#endif /* !(_MIPS_ATLAS_H) */ diff --git a/include/asm-mips/mips-boards/atlasint.h b/include/asm-mips/mips-boards/atlasint.h deleted file mode 100644 index 93ba1c1b2a4..00000000000 --- a/include/asm-mips/mips-boards/atlasint.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * Copyright (C) 1999, 2006 MIPS Technologies, Inc. All rights reserved. - * Authors: Carsten Langgaard <carstenl@mips.com> - * Maciej W. Rozycki <macro@mips.com> - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Defines for the Atlas interrupt controller. - * - */ -#ifndef _MIPS_ATLASINT_H -#define _MIPS_ATLASINT_H - -#include <irq.h> - -/* CPU interrupt offsets */ -#define MIPSCPU_INT_SW0 0 -#define MIPSCPU_INT_SW1 1 -#define MIPSCPU_INT_MB0 2 -#define MIPSCPU_INT_ATLAS MIPSCPU_INT_MB0 -#define MIPSCPU_INT_MB1 3 -#define MIPSCPU_INT_MB2 4 -#define MIPSCPU_INT_MB3 5 -#define MIPSCPU_INT_MB4 6 - -/* - * Interrupts 8..39 are used for Atlas interrupt controller interrupts - */ -#define ATLAS_INT_BASE 8 -#define ATLAS_INT_UART (ATLAS_INT_BASE + 0) -#define ATLAS_INT_TIM0 (ATLAS_INT_BASE + 1) -#define ATLAS_INT_RES2 (ATLAS_INT_BASE + 2) -#define ATLAS_INT_RES3 (ATLAS_INT_BASE + 3) -#define ATLAS_INT_RTC (ATLAS_INT_BASE + 4) -#define ATLAS_INT_COREHI (ATLAS_INT_BASE + 5) -#define ATLAS_INT_CORELO (ATLAS_INT_BASE + 6) -#define ATLAS_INT_RES7 (ATLAS_INT_BASE + 7) -#define ATLAS_INT_PCIA (ATLAS_INT_BASE + 8) -#define ATLAS_INT_PCIB (ATLAS_INT_BASE + 9) -#define ATLAS_INT_PCIC (ATLAS_INT_BASE + 10) -#define ATLAS_INT_PCID (ATLAS_INT_BASE + 11) -#define ATLAS_INT_ENUM (ATLAS_INT_BASE + 12) -#define ATLAS_INT_DEG (ATLAS_INT_BASE + 13) -#define ATLAS_INT_ATXFAIL (ATLAS_INT_BASE + 14) -#define ATLAS_INT_INTA (ATLAS_INT_BASE + 15) -#define ATLAS_INT_INTB (ATLAS_INT_BASE + 16) -#define ATLAS_INT_ETH ATLAS_INT_INTB -#define ATLAS_INT_INTC (ATLAS_INT_BASE + 17) -#define ATLAS_INT_SCSI ATLAS_INT_INTC -#define ATLAS_INT_INTD (ATLAS_INT_BASE + 18) -#define ATLAS_INT_SERR (ATLAS_INT_BASE + 19) -#define ATLAS_INT_RES20 (ATLAS_INT_BASE + 20) -#define ATLAS_INT_RES21 (ATLAS_INT_BASE + 21) -#define ATLAS_INT_RES22 (ATLAS_INT_BASE + 22) -#define ATLAS_INT_RES23 (ATLAS_INT_BASE + 23) -#define ATLAS_INT_RES24 (ATLAS_INT_BASE + 24) -#define ATLAS_INT_RES25 (ATLAS_INT_BASE + 25) -#define ATLAS_INT_RES26 (ATLAS_INT_BASE + 26) -#define ATLAS_INT_RES27 (ATLAS_INT_BASE + 27) -#define ATLAS_INT_RES28 (ATLAS_INT_BASE + 28) -#define ATLAS_INT_RES29 (ATLAS_INT_BASE + 29) -#define ATLAS_INT_RES30 (ATLAS_INT_BASE + 30) -#define ATLAS_INT_RES31 (ATLAS_INT_BASE + 31) -#define ATLAS_INT_END (ATLAS_INT_BASE + 31) - -/* - * Interrupts 64..127 are used for Soc-it Classic interrupts - */ -#define MSC01C_INT_BASE 64 - -/* SOC-it Classic interrupt offsets */ -#define MSC01C_INT_TMR 0 -#define MSC01C_INT_PCI 1 - -/* - * Interrupts 64..127 are used for Soc-it EIC interrupts - */ -#define MSC01E_INT_BASE 64 - -/* SOC-it EIC interrupt offsets */ -#define MSC01E_INT_SW0 1 -#define MSC01E_INT_SW1 2 -#define MSC01E_INT_MB0 3 -#define MSC01E_INT_ATLAS MSC01E_INT_MB0 -#define MSC01E_INT_MB1 4 -#define MSC01E_INT_MB2 5 -#define MSC01E_INT_MB3 6 -#define MSC01E_INT_MB4 7 -#define MSC01E_INT_TMR 8 -#define MSC01E_INT_PCI 9 -#define MSC01E_INT_PERFCTR 10 -#define MSC01E_INT_CPUCTR 11 - -#endif /* !(_MIPS_ATLASINT_H) */ diff --git a/include/asm-mips/mips-boards/maltasmp.h b/include/asm-mips/mips-boards/maltasmp.h deleted file mode 100644 index 8d7e955d506..00000000000 --- a/include/asm-mips/mips-boards/maltasmp.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * There are several SMP models supported - * SMTC is mutually exclusive to other options (atm) - */ -#if defined(CONFIG_MIPS_MT_SMTC) -#define malta_smtc 1 -#define malta_cmp 0 -#define malta_smvp 0 -#else -#define malta_smtc 0 -#if defined(CONFIG_MIPS_CMP) -extern int gcmp_present; -#define malta_cmp gcmp_present -#else -#define malta_cmp 0 -#endif -/* FIXME: should become COMFIG_MIPS_MT_SMVP */ -#if defined(CONFIG_MIPS_MT_SMP) -#define malta_smvp 1 -#else -#define malta_smvp 0 -#endif -#endif - -#include <asm/mipsregs.h> -#include <asm/mipsmtregs.h> - -/* malta_smtc */ -#include <asm/smtc.h> -#include <asm/smtc_ipi.h> - -/* malta_cmp */ -#include <asm/cmp.h> - -/* malta_smvp */ -#include <asm/smvp.h> diff --git a/include/asm-mips/mips-boards/saa9730_uart.h b/include/asm-mips/mips-boards/saa9730_uart.h deleted file mode 100644 index c913143d58e..00000000000 --- a/include/asm-mips/mips-boards/saa9730_uart.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Register definitions for the UART part of the Philips SAA9730 chip. - * - */ - -#ifndef SAA9730_UART_H -#define SAA9730_UART_H - -/* The SAA9730 UART register map, as seen via the PCI bus */ - -#define SAA9730_UART_REGS_ADDR 0x21800 - -struct uart_saa9730_regmap { - volatile unsigned char Thr_Rbr; - volatile unsigned char Ier; - volatile unsigned char Iir_Fcr; - volatile unsigned char Lcr; - volatile unsigned char Mcr; - volatile unsigned char Lsr; - volatile unsigned char Msr; - volatile unsigned char Scr; - volatile unsigned char BaudDivLsb; - volatile unsigned char BaudDivMsb; - volatile unsigned char Junk0; - volatile unsigned char Junk1; - volatile unsigned int Config; /* 0x2180c */ - volatile unsigned int TxStart; /* 0x21810 */ - volatile unsigned int TxLength; /* 0x21814 */ - volatile unsigned int TxCounter; /* 0x21818 */ - volatile unsigned int RxStart; /* 0x2181c */ - volatile unsigned int RxLength; /* 0x21820 */ - volatile unsigned int RxCounter; /* 0x21824 */ -}; -typedef volatile struct uart_saa9730_regmap t_uart_saa9730_regmap; - -/* - * Only a subset of the UART control bits are defined here, - * enough to make the serial debug port work. - */ - -#define SAA9730_LCR_DATA8 0x03 - -#define SAA9730_MCR_DTR 0x01 -#define SAA9730_MCR_RTS 0x02 - -#define SAA9730_LSR_DR 0x01 -#define SAA9730_LSR_THRE 0x20 - -#endif /* !(SAA9730_UART_H) */ diff --git a/include/asm-mips/mips-boards/sead.h b/include/asm-mips/mips-boards/sead.h deleted file mode 100644 index 68c69de0b66..00000000000 --- a/include/asm-mips/mips-boards/sead.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Defines of the SEAD board specific address-MAP, registers, etc. - * - */ -#ifndef _MIPS_SEAD_H -#define _MIPS_SEAD_H - -#include <asm/addrspace.h> - -/* - * SEAD UART register base. - */ -#define SEAD_UART0_REGS_BASE (0x1f000800) -#define SEAD_BASE_BAUD ( 3686400 / 16 ) - -#endif /* !(_MIPS_SEAD_H) */ diff --git a/include/asm-mips/mips-boards/seadint.h b/include/asm-mips/mips-boards/seadint.h deleted file mode 100644 index e710bae0734..00000000000 --- a/include/asm-mips/mips-boards/seadint.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2002 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Defines for the SEAD interrupt controller. - */ -#ifndef _MIPS_SEADINT_H -#define _MIPS_SEADINT_H - -#include <irq.h> - -#define MIPSCPU_INT_UART0 2 -#define MIPSCPU_INT_UART1 3 - -#endif /* !(_MIPS_SEADINT_H) */ |