diff options
Diffstat (limited to 'include/asm-mips/sn')
| -rw-r--r-- | include/asm-mips/sn/addrs.h | 27 | ||||
| -rw-r--r-- | include/asm-mips/sn/fru.h (renamed from include/asm-mips/sn/sn0/sn0_fru.h) | 8 | ||||
| -rw-r--r-- | include/asm-mips/sn/klconfig.h | 89 | ||||
| -rw-r--r-- | include/asm-mips/sn/kldir.h | 34 | ||||
| -rw-r--r-- | include/asm-mips/sn/sn0/addrs.h | 87 | ||||
| -rw-r--r-- | include/asm-mips/sn/sn0/arch.h | 17 | ||||
| -rw-r--r-- | include/asm-mips/sn/sn0/hub.h | 4 | ||||
| -rw-r--r-- | include/asm-mips/sn/sn0/hubio.h | 16 | ||||
| -rw-r--r-- | include/asm-mips/sn/sn0/hubmd.h | 2 | ||||
| -rw-r--r-- | include/asm-mips/sn/sn0/hubpi.h | 18 | ||||
| -rw-r--r-- | include/asm-mips/sn/sn0/ip27.h | 9 |
11 files changed, 20 insertions, 291 deletions
diff --git a/include/asm-mips/sn/addrs.h b/include/asm-mips/sn/addrs.h index 3f6891b0c0e..8fa0af6b68d 100644 --- a/include/asm-mips/sn/addrs.h +++ b/include/asm-mips/sn/addrs.h @@ -26,13 +26,8 @@ #ifndef __ASSEMBLY__ -#if defined(CONFIG_SGI_IO) /* FIXME */ -#define PS_UINT_CAST (__psunsigned_t) -#define UINT64_CAST (__uint64_t) -#else /* CONFIG_SGI_IO */ #define PS_UINT_CAST (unsigned long) #define UINT64_CAST (unsigned long) -#endif /* CONFIG_SGI_IO */ #define HUBREG_CAST (volatile hubreg_t *) @@ -252,14 +247,6 @@ * for _x. */ -#ifdef _STANDALONE - -/* DO NOT USE THESE DIRECTLY IN THE KERNEL. SEE BELOW. */ -#define LOCAL_HUB(_x) (HUBREG_CAST (IALIAS_BASE + (_x))) -#define REMOTE_HUB(_n, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ - 0x800000 + (_x))) -#endif /* _STANDALONE */ - /* * WARNING: * When certain Hub chip workaround are defined, it's not sufficient @@ -326,20 +313,6 @@ PHYS_TO_K0(NODE_OFFSET(nasid) | ARCS_SPB_OFFSET) #define ARCS_SPB_SIZE 0x0400 -#ifdef _STANDALONE - -#define ARCS_TVECTOR_OFFSET 0x2800 -#define ARCS_PVECTOR_OFFSET 0x2c00 - -/* - * These addresses are used by the master CPU to install the transfer - * and private vectors. All others use the SPB to find them. - */ -#define TVADDR (NODE_CAC_BASE(get_nasid()) + ARCS_TVECTOR_OFFSET) -#define PVADDR (NODE_CAC_BASE(get_nasid()) + ARCS_PVECTOR_OFFSET) - -#endif /* _STANDALONE */ - #define KLDIR_OFFSET 0x2000 #define KLDIR_ADDR(nasid) \ TO_NODE_UNCAC((nasid), KLDIR_OFFSET) diff --git a/include/asm-mips/sn/sn0/sn0_fru.h b/include/asm-mips/sn/fru.h index 82c6377c275..b3e3606723b 100644 --- a/include/asm-mips/sn/sn0/sn0_fru.h +++ b/include/asm-mips/sn/fru.h @@ -6,10 +6,10 @@ * Derived from IRIX <sys/SN/SN0/sn0_fru.h> * * Copyright (C) 1992 - 1997, 1999 Silcon Graphics, Inc. - * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) + * Copyright (C) 1999, 2006 Ralf Baechle (ralf@linux-mips) */ -#ifndef _ASM_SN_SN0_SN0_FRU_H -#define _ASM_SN_SN0_SN0_FRU_H +#ifndef __ASM_SN_FRU_H +#define __ASM_SN_FRU_H #define MAX_DIMMS 8 /* max # of dimm banks */ #define MAX_PCIDEV 8 /* max # of pci devices on a pci bus */ @@ -41,4 +41,4 @@ typedef struct kf_pci_bus_s { /* confidence level that the pci dev is bad */ } kf_pci_bus_t; -#endif /* _ASM_SN_SN0_SN0_FRU_H */ +#endif /* __ASM_SN_FRU_H */ diff --git a/include/asm-mips/sn/klconfig.h b/include/asm-mips/sn/klconfig.h index 19e0e926be5..52238e65af8 100644 --- a/include/asm-mips/sn/klconfig.h +++ b/include/asm-mips/sn/klconfig.h @@ -36,7 +36,7 @@ //#include <sys/SN/router.h> // XXX Stolen from <sys/SN/router.h>: #define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */ -#include <asm/sn/sn0/sn0_fru.h> +#include <asm/sn/fru.h> //#include <sys/graph.h> //#include <sys/xtalk/xbow.h> @@ -53,32 +53,21 @@ #include <asm/sn/agent.h> #include <asm/arc/types.h> #include <asm/arc/hinv.h> -#if defined(CONFIG_SGI_IO) || defined(CONFIG_SGI_IP35) +#if defined(CONFIG_SGI_IP35) // The hack file has to be before vector and after sn0_fru.... #include <asm/hack.h> #include <asm/sn/vector.h> #include <asm/xtalk/xtalk.h> -#endif /* CONFIG_SGI_IO || CONFIG_SGI_IP35 */ +#endif /* CONFIG_SGI_IP35 */ #endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */ #define KLCFGINFO_MAGIC 0xbeedbabe -#ifdef FRUTEST -typedef u64 klconf_off_t; -#else typedef s32 klconf_off_t; -#endif /* * Some IMPORTANT OFFSETS. These are the offsets on all NODES. */ -#if 0 -#define RAMBASE 0 -#define ARCSSPB_OFF 0x1000 /* shift it to sys/arcs/spb.h */ - -#define OFF_HWGRAPH 0 -#endif - #define MAX_MODULE_ID 255 #define SIZE_PAD 4096 /* 4k padding for structures */ /* @@ -133,15 +122,9 @@ typedef s32 klconf_off_t; typedef struct console_s { -#if defined(CONFIG_SGI_IO) /* FIXME */ - __psunsigned_t uart_base; - __psunsigned_t config_base; - __psunsigned_t memory_base; -#else unsigned long uart_base; unsigned long config_base; unsigned long memory_base; -#endif short baud; short flag; int type; @@ -173,10 +156,6 @@ typedef struct kl_config_hdr { #define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid))) -#if 0 -#define KL_CONFIG_MALLOC_HDR(_nasid) \ - (KL_CONFIG_HDR(_nasid)->ch_malloc_hdr) -#endif #define KL_CONFIG_INFO_OFFSET(_nasid) \ (KL_CONFIG_HDR(_nasid)->ch_board_info) #define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \ @@ -196,23 +175,13 @@ typedef struct kl_config_hdr { /* --- New Macros for the changed kl_config_hdr_t structure --- */ -#if defined(CONFIG_SGI_IO) -#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ - ((__psunsigned_t)_k + (_k->ch_malloc_hdr_off))) -#else #define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ (unsigned long)_k + (_k->ch_malloc_hdr_off))) -#endif #define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n)) -#if defined(CONFIG_SGI_IO) -#define PTR_CH_CONS_INFO(_k) ((console_t *)\ - ((__psunsigned_t)_k + (_k->ch_cons_off))) -#else #define PTR_CH_CONS_INFO(_k) ((console_t *)\ ((unsigned long)_k + (_k->ch_cons_off))) -#endif #define KL_CONFIG_CH_CONS_INFO(_n) PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n)) @@ -489,14 +458,6 @@ typedef struct lboard_s { #define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts) #define KLCF_MODULE_ID(_brd) ((_brd)->brd_module) -#ifdef FRUTEST - -#define KLCF_NEXT(_brd) ((_brd)->brd_next ? (lboard_t *)((_brd)->brd_next): NULL) -#define KLCF_COMP(_brd, _ndx) (klinfo_t *)((_brd)->brd_compts[(_ndx)]) -#define KLCF_COMP_ERROR(_brd, _comp) (_brd = _brd , (_comp)->errinfo) - -#else - #define KLCF_NEXT(_brd) \ ((_brd)->brd_next ? \ (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\ @@ -508,8 +469,6 @@ typedef struct lboard_s { #define KLCF_COMP_ERROR(_brd, _comp) \ (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo)) -#endif - #define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type) #define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */ @@ -630,18 +589,6 @@ typedef struct klport_s { klconf_off_t port_offset; } klport_t; -#if 0 -/* - * This is very similar to the klport_s but instead of having a componant - * offset it has a board offset. - */ -typedef struct klxbow_port_s { - nasid_t port_nasid; - unsigned char port_flag; - klconf_off_t board_offset; -} klxbow_port_t; -#endif - typedef struct klcpu_s { /* CPU */ klinfo_t cpu_info; unsigned short cpu_prid; /* Processor PRID value */ @@ -944,36 +891,6 @@ extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int); extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class); -#if defined(CONFIG_SGI_IO) -extern xwidgetnum_t nodevertex_widgetnum_get(vertex_hdl_t node_vtx); -extern vertex_hdl_t nodevertex_xbow_peer_get(vertex_hdl_t node_vtx); -extern lboard_t *find_gfxpipe(int pipenum); -extern void setup_gfxpipe_link(vertex_hdl_t vhdl,int pipenum); -extern lboard_t *find_lboard_module_class(lboard_t *start, moduleid_t mod, - unsigned char brd_class); -extern lboard_t *find_nic_lboard(lboard_t *, nic_t); -extern lboard_t *find_nic_type_lboard(nasid_t, unsigned char, nic_t); -extern lboard_t *find_lboard_modslot(lboard_t *start, moduleid_t mod, slotid_t slot); -extern lboard_t *find_lboard_module(lboard_t *start, moduleid_t mod); -extern lboard_t *get_board_name(nasid_t nasid, moduleid_t mod, slotid_t slot, char *name); -extern int config_find_nic_router(nasid_t, nic_t, lboard_t **, klrou_t**); -extern int config_find_nic_hub(nasid_t, nic_t, lboard_t **, klhub_t**); -extern int config_find_xbow(nasid_t, lboard_t **, klxbow_t**); -extern klcpu_t *get_cpuinfo(cpuid_t cpu); -extern int update_klcfg_cpuinfo(nasid_t, int); -extern void board_to_path(lboard_t *brd, char *path); -extern moduleid_t get_module_id(nasid_t nasid); -extern void nic_name_convert(char *old_name, char *new_name); -extern int module_brds(nasid_t nasid, lboard_t **module_brds, int n); -extern lboard_t *brd_from_key(ulong_t key); -extern void device_component_canonical_name_get(lboard_t *,klinfo_t *, - char *); -extern int board_serial_number_get(lboard_t *,char *); -extern int is_master_baseio(nasid_t,moduleid_t,slotid_t); -extern nasid_t get_actual_nasid(lboard_t *brd) ; -extern net_vec_t klcfg_discover_route(lboard_t *, lboard_t *, int); -#else /* CONFIG_SGI_IO */ extern klcpu_t *sn_get_cpuinfo(cpuid_t cpu); -#endif /* CONFIG_SGI_IO */ #endif /* _ASM_SN_KLCONFIG_H */ diff --git a/include/asm-mips/sn/kldir.h b/include/asm-mips/sn/kldir.h index e3e231f0b79..0573cbffc10 100644 --- a/include/asm-mips/sn/kldir.h +++ b/include/asm-mips/sn/kldir.h @@ -12,10 +12,6 @@ #define _ASM_SN_KLDIR_H -#if defined(CONFIG_SGI_IO) -#include <asm/hack.h> -#endif - /* * The kldir memory area resides at a fixed place in each node's memory and * provides pointers to most other IP27 memory areas. This allows us to @@ -135,8 +131,6 @@ #define KLDIR_OFF_STRIDE 0x28 #endif /* __ASSEMBLY__ */ -#if !defined(CONFIG_SGI_IO) - /* * This is defined here because IP27_SYMMON_STK_SIZE must be at least what * we define here. Since it's set up in the prom. We can't redefine it later @@ -146,7 +140,7 @@ */ #define SYMMON_STACK_SIZE 0x8000 -#if defined (PROM) || defined (SABLE) +#if defined (PROM) /* * These defines are prom version dependent. No code other than the IP27 @@ -183,7 +177,7 @@ #define IP27_FREEMEM_COUNT 1 #define IP27_FREEMEM_STRIDE 0 -#endif /* PROM || SABLE*/ +#endif /* PROM */ /* * There will be only one of these in a partition so the IO6 must set it up. */ @@ -206,17 +200,11 @@ #define KLDIR_ENT_SIZE 0x40 #define KLDIR_MAX_ENTRIES (0x400 / 0x40) -#endif /* !CONFIG_SGI_IO */ - #ifndef __ASSEMBLY__ typedef struct kldir_ent_s { u64 magic; /* Indicates validity of entry */ off_t offset; /* Offset from start of node space */ -#if defined(CONFIG_SGI_IO) /* FIXME */ - __psunsigned_t pointer; /* Pointer to area in some cases */ -#else unsigned long pointer; /* Pointer to area in some cases */ -#endif size_t size; /* Size in bytes */ u64 count; /* Repeat count if array, 1 if not */ size_t stride; /* Stride if array, 0 if not */ @@ -226,22 +214,4 @@ typedef struct kldir_ent_s { } kldir_ent_t; #endif /* !__ASSEMBLY__ */ -#if defined(CONFIG_SGI_IO) - -#define KLDIR_ENT_SIZE 0x40 -#define KLDIR_MAX_ENTRIES (0x400 / 0x40) - -/* - * The actual offsets of each memory area are machine-dependent - */ -#ifdef CONFIG_SGI_IP27 -// Not yet #include <asm/sn/sn0/kldir.h> -#elif defined(CONFIG_SGI_IP35) -#include <asm/sn/sn1/kldir.h> -#else -#error "kldir.h is currently defined for IP27 and IP35 platforms only" -#endif - -#endif /* CONFIG_SGI_IO */ - #endif /* _ASM_SN_KLDIR_H */ diff --git a/include/asm-mips/sn/sn0/addrs.h b/include/asm-mips/sn/sn0/addrs.h index c0905c1ac93..9e8cc52910f 100644 --- a/include/asm-mips/sn/sn0/addrs.h +++ b/include/asm-mips/sn/sn0/addrs.h @@ -48,7 +48,7 @@ * so for now we just use defines bracketed by an ifdef. */ -#ifdef CONFIG_SGI_SN0_N_MODE +#ifdef CONFIG_SGI_SN_N_MODE #define NODE_SIZE_BITS 31 #define BWIN_SIZE_BITS 28 @@ -62,7 +62,7 @@ #define BDDIR_UPPER_MASK (UINT64_CAST 0x7ffff << 10) #define BDECC_UPPER_MASK (UINT64_CAST 0x3ffffff << 3) -#else /* !defined(CONFIG_SGI_SN0_N_MODE), assume that M-mode is desired */ +#else /* !defined(CONFIG_SGI_SN_N_MODE), assume that M-mode is desired */ #define NODE_SIZE_BITS 32 #define BWIN_SIZE_BITS 29 @@ -76,7 +76,7 @@ #define BDDIR_UPPER_MASK (UINT64_CAST 0xfffff << 10) #define BDECC_UPPER_MASK (UINT64_CAST 0x7ffffff << 3) -#endif /* !defined(CONFIG_SGI_SN0_N_MODE) */ +#endif /* !defined(CONFIG_SGI_SN_N_MODE) */ #define NODE_ADDRSPACE_SIZE (UINT64_CAST 1 << NODE_SIZE_BITS) @@ -84,15 +84,15 @@ #define NASID_GET(_pa) (int) ((UINT64_CAST (_pa) >> \ NASID_SHFT) & NASID_BITMASK) -#if !defined(__ASSEMBLY__) && !defined(_STANDALONE) +#if !defined(__ASSEMBLY__) #define NODE_SWIN_BASE(nasid, widget) \ ((widget == 0) ? NODE_BWIN_BASE((nasid), SWIN0_BIGWIN) \ : RAW_NODE_SWIN_BASE(nasid, widget)) -#else /* __ASSEMBLY__ || _STANDALONE */ +#else /* __ASSEMBLY__ */ #define NODE_SWIN_BASE(nasid, widget) \ (NODE_IO_BASE(nasid) + (UINT64_CAST (widget) << SWIN_SIZE_BITS)) -#endif /* __ASSEMBLY__ || _STANDALONE */ +#endif /* __ASSEMBLY__ */ /* * The following definitions pertain to the IO special address @@ -142,12 +142,7 @@ #define SN0_WIDGET_BASE(_nasid, _wid) (NODE_SWIN_BASE((_nasid), (_wid))) /* Turn on sable logging for the processors whose bits are set. */ -#ifdef SABLE -#define SABLE_LOG_TRIGGER(_map) \ - *((volatile hubreg_t *)(IO_BASE + 0x17ffff0)) = (_map) -#else #define SABLE_LOG_TRIGGER(_map) -#endif /* SABLE */ #ifndef __ASSEMBLY__ #define KERN_NMI_ADDR(nasid, slice) \ @@ -280,76 +275,6 @@ #define _ARCSPROM -#ifdef _STANDALONE - -/* - * The PROM needs to pass the device base address and the - * device pci cfg space address to the device drivers during - * install. The COMPONENT->Key field is used for this purpose. - * Macros needed by SN0 device drivers to convert the - * COMPONENT->Key field to the respective base address. - * Key field looks as follows: - * - * +----------------------------------------------------+ - * |devnasid | widget |pciid |hubwidid|hstnasid | adap | - * | 2 | 1 | 1 | 1 | 2 | 1 | - * +----------------------------------------------------+ - * | | | | | | | - * 64 48 40 32 24 8 0 - * - * These are used by standalone drivers till the io infrastructure - * is in place. - */ - -#ifndef __ASSEMBLY__ - -#define uchar unsigned char - -#define KEY_DEVNASID_SHFT 48 -#define KEY_WIDID_SHFT 40 -#define KEY_PCIID_SHFT 32 -#define KEY_HUBWID_SHFT 24 -#define KEY_HSTNASID_SHFT 8 - -#define MK_SN0_KEY(nasid, widid, pciid) \ - ((((__psunsigned_t)nasid)<< KEY_DEVNASID_SHFT |\ - ((__psunsigned_t)widid) << KEY_WIDID_SHFT) |\ - ((__psunsigned_t)pciid) << KEY_PCIID_SHFT) - -#define ADD_HUBWID_KEY(key,hubwid)\ - (key|=((__psunsigned_t)hubwid << KEY_HUBWID_SHFT)) - -#define ADD_HSTNASID_KEY(key,hstnasid)\ - (key|=((__psunsigned_t)hstnasid << KEY_HSTNASID_SHFT)) - -#define GET_DEVNASID_FROM_KEY(key) ((short)(key >> KEY_DEVNASID_SHFT)) -#define GET_WIDID_FROM_KEY(key) ((uchar)(key >> KEY_WIDID_SHFT)) -#define GET_PCIID_FROM_KEY(key) ((uchar)(key >> KEY_PCIID_SHFT)) -#define GET_HUBWID_FROM_KEY(key) ((uchar)(key >> KEY_HUBWID_SHFT)) -#define GET_HSTNASID_FROM_KEY(key) ((short)(key >> KEY_HSTNASID_SHFT)) - -#define PCI_64_TARGID_SHFT 60 - -#define GET_PCIBASE_FROM_KEY(key) (NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\ - GET_WIDID_FROM_KEY(key))\ - | BRIDGE_DEVIO(GET_PCIID_FROM_KEY(key))) - -#define GET_PCICFGBASE_FROM_KEY(key) \ - (NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\ - GET_WIDID_FROM_KEY(key))\ - | BRIDGE_TYPE0_CFG_DEV(GET_PCIID_FROM_KEY(key))) - -#define GET_WIDBASE_FROM_KEY(key) \ - (NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\ - GET_WIDID_FROM_KEY(key))) - -#define PUT_INSTALL_STATUS(c,s) c->Revision = s -#define GET_INSTALL_STATUS(c) c->Revision - -#endif /* !__ASSEMBLY__ */ - -#endif /* _STANDALONE */ - #if defined (HUB_ERR_STS_WAR) #define ERR_STS_WAR_REGISTER IIO_IIBUSERR diff --git a/include/asm-mips/sn/sn0/arch.h b/include/asm-mips/sn/sn0/arch.h index 7a221666c58..f734f2007f2 100644 --- a/include/asm-mips/sn/sn0/arch.h +++ b/include/asm-mips/sn/sn0/arch.h @@ -12,8 +12,6 @@ #define _ASM_SN_SN0_ARCH_H -#ifndef SABLE - #ifndef SN0XXL /* 128 cpu SMP max */ /* * This is the maximum number of nodes that can be part of a kernel. @@ -53,25 +51,16 @@ */ #define MAX_PARTITIONS MAX_REGIONS - -#else - -#define MAX_COMPACT_NODES 4 -#define MAX_NASIDS 4 -#define MAXCPUS 8 - -#endif - #define NASID_MASK_BYTES ((MAX_NASIDS + 7) / 8) /* * Slot constants for SN0 */ -#ifdef CONFIG_SGI_SN0_N_MODE +#ifdef CONFIG_SGI_SN_N_MODE #define MAX_MEM_SLOTS 16 /* max slots per node */ -#else /* !CONFIG_SGI_SN0_N_MODE, assume M_MODE */ +#else /* !CONFIG_SGI_SN_N_MODE, assume CONFIG_SGI_SN_M_MODE */ #define MAX_MEM_SLOTS 32 /* max slots per node */ -#endif /* defined(N_MODE) */ +#endif /* CONFIG_SGI_SN_M_MODE */ #define SLOT_SHIFT (27) #define SLOT_MIN_MEM_SIZE (32*1024*1024) diff --git a/include/asm-mips/sn/sn0/hub.h b/include/asm-mips/sn/sn0/hub.h index f5dbba6f461..3e228f8e796 100644 --- a/include/asm-mips/sn/sn0/hub.h +++ b/include/asm-mips/sn/sn0/hub.h @@ -31,10 +31,6 @@ #include <asm/sn/sn0/hubni.h> //#include <asm/sn/sn0/hubcore.h> -#ifdef SABLE -#define IP27_NO_HUBUART_INT 1 -#endif - /* Translation of uncached attributes */ #define UATTR_HSPEC 0 #define UATTR_IO 1 diff --git a/include/asm-mips/sn/sn0/hubio.h b/include/asm-mips/sn/sn0/hubio.h index f314da21b97..ef91b336355 100644 --- a/include/asm-mips/sn/sn0/hubio.h +++ b/include/asm-mips/sn/sn0/hubio.h @@ -486,22 +486,6 @@ typedef union h1_icrba_u { #define ICRBN_A_CERR_SHFT 54 #define ICRBN_A_ERR_MASK 0x3ff -#if 0 /* Disabled, this causes namespace polution and break allmodconfig */ -/* - * Easy access macros. - */ -#define a_error icrba_fields_s.error -#define a_ecode icrba_fields_s.ecode -#define a_lnetuce icrba_fields_s.lnetuce -#define a_mark icrba_fields_s.mark -#define a_xerr icrba_fields_s.xerr -#define a_sidn icrba_fields_s.sidn -#define a_tnum icrba_fields_s.tnum -#define a_addr icrba_fields_s.addr -#define a_valid icrba_fields_s.valid -#define a_iow icrba_fields_s.iow -#endif - #endif /* !__ASSEMBLY__ */ #define IIO_ICRB_ADDR_SHFT 2 /* Shift to get proper address */ diff --git a/include/asm-mips/sn/sn0/hubmd.h b/include/asm-mips/sn/sn0/hubmd.h index f0100024188..14c225d8066 100644 --- a/include/asm-mips/sn/sn0/hubmd.h +++ b/include/asm-mips/sn/sn0/hubmd.h @@ -91,7 +91,7 @@ #define MD_UREG1_14 0x2200f0 /* uController/UART 1 register */ #define MD_UREG1_15 0x2200f8 /* uController/UART 1 register */ -#ifdef CONFIG_SGI_SN0_N_MODE +#ifdef CONFIG_SGI_SN_N_MODE #define MD_MEM_BANKS 4 /* 4 banks of memory max in N mode */ #else #define MD_MEM_BANKS 8 /* 8 banks of memory max in M mode */ diff --git a/include/asm-mips/sn/sn0/hubpi.h b/include/asm-mips/sn/sn0/hubpi.h index 355bba8552e..e39f5f9da04 100644 --- a/include/asm-mips/sn/sn0/hubpi.h +++ b/include/asm-mips/sn/sn0/hubpi.h @@ -398,24 +398,6 @@ typedef u64 rtc_time_t; /* PI_RT_FILTER_CTRL mask and shift definitions */ -#if 0 -/* - * XXX - This register's definition has changed, but it's only implemented - * in Hub 2. - */ -#define PRFC_DROP_COUNT_SHFT 27 -#define PRFC_DROP_COUNT_MASK (UINT64_CAST 0x3ff << 27) -#define PRFC_DROP_CTR_SHFT 18 -#define PRFC_DROP_CTR_MASK (UINT64_CAST 0x1ff << 18) -#define PRFC_MASK_ENABLE_SHFT 10 -#define PRFC_MASK_ENABLE_MASK (UINT64_CAST 0x7f << 10) -#define PRFC_MASK_CTR_SHFT 2 -#define PRFC_MASK_CTR_MASK (UINT64_CAST 0xff << 2) -#define PRFC_OFFSET_SHFT 0 -#define PRFC_OFFSET_MASK (UINT64_CAST 3) -#endif /* 0 */ - - /* * Bits for NACK_CNT_A/B and NACK_CMP */ diff --git a/include/asm-mips/sn/sn0/ip27.h b/include/asm-mips/sn/sn0/ip27.h index ade0e974dd7..3c97e0855c8 100644 --- a/include/asm-mips/sn/sn0/ip27.h +++ b/include/asm-mips/sn/sn0/ip27.h @@ -6,7 +6,7 @@ * Derived from IRIX <sys/SN/SN0/IP27.h>. * * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. - * Copyright (C) 1999 by Ralf Baechle + * Copyright (C) 1999, 2006 by Ralf Baechle */ #ifndef _ASM_SN_SN0_IP27_H #define _ASM_SN_SN0_IP27_H @@ -82,11 +82,4 @@ #define SEND_NMI(_nasid, _slice) \ REMOTE_HUB_S((_nasid), (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1) -/* Sanity hazzard ... Below all the Origin hacks are following. */ - -#define SN00_BRIDGE 0x9200000008000000 -#define SN00I_BRIDGE0 0x920000000b000000 -#define SN00I_BRIDGE1 0x920000000e000000 -#define SN00I_BRIDGE2 0x920000000f000000 - #endif /* _ASM_SN_SN0_IP27_H */ |