diff options
Diffstat (limited to 'include/asm-mips')
55 files changed, 982 insertions, 713 deletions
diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h index 1386af1cb7d..0cc6c7060f3 100644 --- a/include/asm-mips/addrspace.h +++ b/include/asm-mips/addrspace.h @@ -133,57 +133,22 @@ || defined (CONFIG_CPU_NEVADA) \ || defined (CONFIG_CPU_TX49XX) \ || defined (CONFIG_CPU_MIPS64) -#define KUSIZE _LLCONST_(0x0000010000000000) /* 2^^40 */ -#define KUSIZE_64 _LLCONST_(0x0000010000000000) /* 2^^40 */ -#define K0SIZE _LLCONST_(0x0000001000000000) /* 2^^36 */ -#define K1SIZE _LLCONST_(0x0000001000000000) /* 2^^36 */ -#define K2SIZE _LLCONST_(0x000000ff80000000) -#define KSEGSIZE _LLCONST_(0x000000ff80000000) /* max syssegsz */ #define TO_PHYS_MASK _LLCONST_(0x0000000fffffffff) /* 2^^36 - 1 */ #endif #if defined (CONFIG_CPU_R8000) /* We keep KUSIZE consistent with R4000 for now (2^^40) instead of (2^^48) */ -#define KUSIZE _LLCONST_(0x0000010000000000) /* 2^^40 */ -#define KUSIZE_64 _LLCONST_(0x0000010000000000) /* 2^^40 */ -#define K0SIZE _LLCONST_(0x0000010000000000) /* 2^^40 */ -#define K1SIZE _LLCONST_(0x0000010000000000) /* 2^^40 */ -#define K2SIZE _LLCONST_(0x0001000000000000) -#define KSEGSIZE _LLCONST_(0x0000010000000000) /* max syssegsz */ #define TO_PHYS_MASK _LLCONST_(0x000000ffffffffff) /* 2^^40 - 1 */ #endif #if defined (CONFIG_CPU_R10000) -#define KUSIZE _LLCONST_(0x0000010000000000) /* 2^^40 */ -#define KUSIZE_64 _LLCONST_(0x0000010000000000) /* 2^^40 */ -#define K0SIZE _LLCONST_(0x0000010000000000) /* 2^^40 */ -#define K1SIZE _LLCONST_(0x0000010000000000) /* 2^^40 */ -#define K2SIZE _LLCONST_(0x00000fff80000000) -#define KSEGSIZE _LLCONST_(0x00000fff80000000) /* max syssegsz */ #define TO_PHYS_MASK _LLCONST_(0x000000ffffffffff) /* 2^^40 - 1 */ #endif #if defined(CONFIG_CPU_SB1) || defined(CONFIG_CPU_SB1A) -#define KUSIZE _LLCONST_(0x0000100000000000) /* 2^^44 */ -#define KUSIZE_64 _LLCONST_(0x0000100000000000) /* 2^^44 */ -#define K0SIZE _LLCONST_(0x0000100000000000) /* 2^^44 */ -#define K1SIZE _LLCONST_(0x0000100000000000) /* 2^^44 */ -#define K2SIZE _LLCONST_(0x0000ffff80000000) -#define KSEGSIZE _LLCONST_(0x0000ffff80000000) /* max syssegsz */ #define TO_PHYS_MASK _LLCONST_(0x00000fffffffffff) /* 2^^44 - 1 */ #endif -/* - * Further names for SGI source compatibility. These are stolen from - * IRIX's <sys/mips_addrspace.h>. - */ -#define KUBASE _LLCONST_(0) -#define KUSIZE_32 _LLCONST_(0x0000000080000000) /* KUSIZE - for a 32 bit proc */ -#define K0BASE_EXL_WR _LLCONST_(0xa800000000000000) /* exclusive on write */ -#define K0BASE_NONCOH _LLCONST_(0x9800000000000000) /* noncoherent */ -#define K0BASE_EXL _LLCONST_(0xa000000000000000) /* exclusive */ - #ifndef CONFIG_CPU_R8000 /* diff --git a/include/asm-mips/apm.h b/include/asm-mips/apm.h new file mode 100644 index 00000000000..e8c69208f63 --- /dev/null +++ b/include/asm-mips/apm.h @@ -0,0 +1,65 @@ +/* -*- linux-c -*- + * + * (C) 2003 zecke@handhelds.org + * + * GPL version 2 + * + * based on arch/arm/kernel/apm.c + * factor out the information needed by architectures to provide + * apm status + * + * + */ +#ifndef MIPS_ASM_SA1100_APM_H +#define MIPS_ASM_SA1100_APM_H + +#include <linux/config.h> +#include <linux/apm_bios.h> + +/* + * This structure gets filled in by the machine specific 'get_power_status' + * implementation. Any fields which are not set default to a safe value. + */ +struct apm_power_info { + unsigned char ac_line_status; +#define APM_AC_OFFLINE 0 +#define APM_AC_ONLINE 1 +#define APM_AC_BACKUP 2 +#define APM_AC_UNKNOWN 0xff + + unsigned char battery_status; +#define APM_BATTERY_STATUS_HIGH 0 +#define APM_BATTERY_STATUS_LOW 1 +#define APM_BATTERY_STATUS_CRITICAL 2 +#define APM_BATTERY_STATUS_CHARGING 3 +#define APM_BATTERY_STATUS_NOT_PRESENT 4 +#define APM_BATTERY_STATUS_UNKNOWN 0xff + + unsigned char battery_flag; +#define APM_BATTERY_FLAG_HIGH (1 << 0) +#define APM_BATTERY_FLAG_LOW (1 << 1) +#define APM_BATTERY_FLAG_CRITICAL (1 << 2) +#define APM_BATTERY_FLAG_CHARGING (1 << 3) +#define APM_BATTERY_FLAG_NOT_PRESENT (1 << 7) +#define APM_BATTERY_FLAG_UNKNOWN 0xff + + int battery_life; + int time; + int units; +#define APM_UNITS_MINS 0 +#define APM_UNITS_SECS 1 +#define APM_UNITS_UNKNOWN -1 + +}; + +/* + * This allows machines to provide their own "apm get power status" function. + */ +extern void (*apm_get_power_status)(struct apm_power_info *); + +/* + * Queue an event (APM_SYS_SUSPEND or APM_CRITICAL_SUSPEND) + */ +void apm_queue_event(apm_event_t event); + +#endif diff --git a/include/asm-mips/asmmacro-32.h b/include/asm-mips/asmmacro-32.h index 11daf5ceb7b..5de3963f511 100644 --- a/include/asm-mips/asmmacro-32.h +++ b/include/asm-mips/asmmacro-32.h @@ -12,7 +12,7 @@ #include <asm/fpregdef.h> #include <asm/mipsregs.h> - .macro fpu_save_double thread status tmp1=t0 tmp2 + .macro fpu_save_double thread status tmp1=t0 cfc1 \tmp1, fcr31 sdc1 $f0, THREAD_FPR0(\thread) sdc1 $f2, THREAD_FPR2(\thread) @@ -70,7 +70,7 @@ sw \tmp, THREAD_FCR31(\thread) .endm - .macro fpu_restore_double thread tmp=t0 + .macro fpu_restore_double thread status tmp=t0 lw \tmp, THREAD_FCR31(\thread) ldc1 $f0, THREAD_FPR0(\thread) ldc1 $f2, THREAD_FPR2(\thread) diff --git a/include/asm-mips/asmmacro-64.h b/include/asm-mips/asmmacro-64.h index 559c355b9b8..225feefcb25 100644 --- a/include/asm-mips/asmmacro-64.h +++ b/include/asm-mips/asmmacro-64.h @@ -53,12 +53,12 @@ sdc1 $f31, THREAD_FPR31(\thread) .endm - .macro fpu_save_double thread status tmp1 tmp2 - sll \tmp2, \tmp1, 5 - bgez \tmp2, 2f + .macro fpu_save_double thread status tmp + sll \tmp, \status, 5 + bgez \tmp, 2f fpu_save_16odd \thread 2: - fpu_save_16even \thread \tmp1 # clobbers t1 + fpu_save_16even \thread \tmp .endm .macro fpu_restore_16even thread tmp=t0 @@ -101,13 +101,12 @@ ldc1 $f31, THREAD_FPR31(\thread) .endm - .macro fpu_restore_double thread tmp - mfc0 t0, CP0_STATUS - sll t1, t0, 5 - bgez t1, 1f # 16 register mode? + .macro fpu_restore_double thread status tmp + sll \tmp, \status, 5 + bgez \tmp, 1f # 16 register mode? - fpu_restore_16odd a0 -1: fpu_restore_16even a0, t0 # clobbers t0 + fpu_restore_16odd \thread +1: fpu_restore_16even \thread \tmp .endm .macro cpu_save_nonscratch thread diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h index 14fc88f2722..3b745e76f42 100644 --- a/include/asm-mips/bootinfo.h +++ b/include/asm-mips/bootinfo.h @@ -217,6 +217,13 @@ */ #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ +#define MACH_TITAN_EXCITE 2 /* Basler eXcite */ + +/* + * Valid machtype for group NEC EMMA2RH + */ +#define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */ +#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ #define CL_SIZE COMMAND_LINE_SIZE @@ -258,4 +265,10 @@ extern char arcs_cmdline[CL_SIZE]; * Registers a0, a1, a3 and a4 as passed to the kenrel entry by firmware */ extern unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3; + +/* + * Platform memory detection hook called by setup_arch + */ +extern void plat_mem_setup(void); + #endif /* _ASM_BOOTINFO_H */ diff --git a/include/asm-mips/ddb5074.h b/include/asm-mips/ddb5074.h deleted file mode 100644 index 0d09ac27f9a..00000000000 --- a/include/asm-mips/ddb5074.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * include/asm-mips/ddb5074.h -- NEC DDB Vrc-5074 definitions - * - * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> - * Sony Software Development Center Europe (SDCE), Brussels - */ - -extern void ddb5074_led_hex(int hex); -extern void ddb5074_led_d2(int on); -extern void ddb5074_led_d3(int on); - diff --git a/include/asm-mips/ddb5xxx/ddb5074.h b/include/asm-mips/ddb5xxx/ddb5074.h deleted file mode 100644 index 58d88306af6..00000000000 --- a/include/asm-mips/ddb5xxx/ddb5074.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * include/asm-mips/ddb5074.h -- NEC DDB Vrc-5074 definitions - * - * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com> - * Sony Software Development Center Europe (SDCE), Brussels - */ - -#ifndef _ASM_DDB5XXX_DDB5074_H -#define _ASM_DDB5XXX_DDB5074_H - -#include <asm/nile4.h> - -#define DDB_SDRAM_SIZE 0x04000000 /* 64MB */ - -#define DDB_PCI_IO_BASE 0x06000000 -#define DDB_PCI_IO_SIZE 0x02000000 /* 32 MB */ - -#define DDB_PCI_MEM_BASE 0x08000000 -#define DDB_PCI_MEM_SIZE 0x08000000 /* 128 MB */ - -#define DDB_PCI_CONFIG_BASE DDB_PCI_MEM_BASE -#define DDB_PCI_CONFIG_SIZE DDB_PCI_MEM_SIZE - -#define NILE4_PCI_IO_BASE 0xa6000000 -#define NILE4_PCI_MEM_BASE 0xa8000000 -#define NILE4_PCI_CFG_BASE NILE4_PCI_MEM_BASE -#define DDB_PCI_IACK_BASE NILE4_PCI_IO_BASE - -#define NILE4_IRQ_BASE NUM_I8259_INTERRUPTS -#define CPU_IRQ_BASE (NUM_NILE4_INTERRUPTS + NILE4_IRQ_BASE) -#define CPU_NILE4_CASCADE 2 - -extern void ddb5074_led_hex(int hex); -extern void ddb5074_led_d2(int on); -extern void ddb5074_led_d3(int on); - -extern void nile4_irq_setup(u32 base); -#endif diff --git a/include/asm-mips/ddb5xxx/ddb5476.h b/include/asm-mips/ddb5xxx/ddb5476.h deleted file mode 100644 index 4c23390d935..00000000000 --- a/include/asm-mips/ddb5xxx/ddb5476.h +++ /dev/null @@ -1,157 +0,0 @@ -/* - * header file specific for ddb5476 - * - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -/* - * Memory map (physical address) - * - * Note most of the following address must be properly aligned by the - * corresponding size. For example, if PCI_IO_SIZE is 16MB, then - * PCI_IO_BASE must be aligned along 16MB boundary. - */ -#define DDB_SDRAM_BASE 0x00000000 -#define DDB_SDRAM_SIZE 0x04000000 /* 64MB */ - -#define DDB_DCS3_BASE 0x04000000 /* flash 1 */ -#define DDB_DCS3_SIZE 0x01000000 /* 16MB */ - -#define DDB_DCS2_BASE 0x05000000 /* flash 2 */ -#define DDB_DCS2_SIZE 0x01000000 /* 16MB */ - -#define DDB_PCI_IO_BASE 0x06000000 -#define DDB_PCI_IO_SIZE 0x02000000 /* 32 MB */ - -#define DDB_PCI_MEM_BASE 0x08000000 -#define DDB_PCI_MEM_SIZE 0x08000000 /* 128 MB */ - -#define DDB_DCS5_BASE 0x13000000 /* DDB status regs */ -#define DDB_DCS5_SIZE 0x00200000 /* 2MB, 8-bit */ - -#define DDB_DCS4_BASE 0x14000000 /* DDB control regs */ -#define DDB_DCS4_SIZE 0x00200000 /* 2MB, 8-bit */ - -#define DDB_INTCS_BASE 0x1fa00000 /* VRC5476 control regs */ -#define DDB_INTCS_SIZE 0x00200000 /* 2MB */ - -#define DDB_BOOTCS_BASE 0x1fc00000 /* Boot ROM / EPROM /Flash */ -#define DDB_BOOTCS_SIZE 0x00200000 /* 2 MB - doc says 4MB */ - - -/* aliases */ -#define DDB_PCI_CONFIG_BASE DDB_PCI_MEM_BASE -#define DDB_PCI_CONFIG_SIZE DDB_PCI_MEM_SIZE - -/* PCI intr ack share PCIW0 with PCI IO */ -#define DDB_PCI_IACK_BASE DDB_PCI_IO_BASE - -/* - * Interrupt mapping - * - * We have three interrupt controllers: - * - * . CPU itself - 8 sources - * . i8259 - 16 sources - * . vrc5476 - 16 sources - * - * They connected as follows: - * all vrc5476 interrupts are routed to cpu IP2 (by software setting) - * all i2869 are routed to INTC in vrc5476 (by hardware connection) - * - * All VRC5476 PCI interrupts are level-triggered (no ack needed). - * All PCI irq but INTC are active low. - */ - -/* - * irq number block assignment - */ - -#define NUM_CPU_IRQ 8 -#define NUM_I8259_IRQ 16 -#define NUM_VRC5476_IRQ 16 - -#define DDB_IRQ_BASE 0 - -#define I8259_IRQ_BASE DDB_IRQ_BASE -#define VRC5476_IRQ_BASE (I8259_IRQ_BASE + NUM_I8259_IRQ) -#define CPU_IRQ_BASE (VRC5476_IRQ_BASE + NUM_VRC5476_IRQ) - -/* - * vrc5476 irq defs, see page 52-64 of Vrc5074 system controller manual - */ - -#define VRC5476_IRQ_CPCE 0 /* cpu parity error */ -#define VRC5476_IRQ_CNTD 1 /* cpu no target */ -#define VRC5476_IRQ_MCE 2 /* memory check error */ -#define VRC5476_IRQ_DMA 3 /* DMA */ -#define VRC5476_IRQ_UART 4 /* vrc5476 builtin UART, not used */ -#define VRC5476_IRQ_WDOG 5 /* watchdog timer */ -#define VRC5476_IRQ_GPT 6 /* general purpose timer */ -#define VRC5476_IRQ_LBRT 7 /* local bus read timeout */ -#define VRC5476_IRQ_INTA 8 /* PCI INT #A */ -#define VRC5476_IRQ_INTB 9 /* PCI INT #B */ -#define VRC5476_IRQ_INTC 10 /* PCI INT #C */ -#define VRC5476_IRQ_INTD 11 /* PCI INT #D */ -#define VRC5476_IRQ_INTE 12 /* PCI INT #E */ -#define VRC5476_IRQ_RESERVED_13 13 /* reserved */ -#define VRC5476_IRQ_PCIS 14 /* PCI SERR # */ -#define VRC5476_IRQ_PCI 15 /* PCI internal error */ - -/* - * i2859 irq assignment - */ -#define I8259_IRQ_RESERVED_0 0 -#define I8259_IRQ_KEYBOARD 1 /* M1543 default */ -#define I8259_IRQ_CASCADE 2 -#define I8259_IRQ_UART_B 3 /* M1543 default, may conflict with RTC according to schematic diagram */ -#define I8259_IRQ_UART_A 4 /* M1543 default */ -#define I8259_IRQ_PARALLEL 5 /* M1543 default */ -#define I8259_IRQ_RESERVED_6 6 -#define I8259_IRQ_RESERVED_7 7 -#define I8259_IRQ_RTC 8 /* who set this? */ -#define I8259_IRQ_USB 9 /* ddb_setup */ -#define I8259_IRQ_PMU 10 /* ddb_setup */ -#define I8259_IRQ_RESERVED_11 11 -#define I8259_IRQ_RESERVED_12 12 /* m1543_irq_setup */ -#define I8259_IRQ_RESERVED_13 13 -#define I8259_IRQ_HDC1 14 /* default and ddb_setup */ -#define I8259_IRQ_HDC2 15 /* default */ - - -/* - * misc - */ -#define VRC5476_I8259_CASCADE VRC5476_IRQ_INTC -#define CPU_VRC5476_CASCADE 2 - -#define is_i8259_irq(irq) ((irq) < NUM_I8259_IRQ) -#define nile4_to_irq(n) ((n)+NUM_I8259_IRQ) -#define irq_to_nile4(n) ((n)-NUM_I8259_IRQ) - -/* - * low-level irq functions - */ -#ifndef __ASSEMBLY__ -extern void nile4_map_irq(int nile4_irq, int cpu_irq); -extern void nile4_map_irq_all(int cpu_irq); -extern void nile4_enable_irq(int nile4_irq); -extern void nile4_disable_irq(int nile4_irq); -extern void nile4_disable_irq_all(void); -extern u16 nile4_get_irq_stat(int cpu_irq); -extern void nile4_enable_irq_output(int cpu_irq); -extern void nile4_disable_irq_output(int cpu_irq); -extern void nile4_set_pci_irq_polarity(int pci_irq, int high); -extern void nile4_set_pci_irq_level_or_edge(int pci_irq, int level); -extern void nile4_clear_irq(int nile4_irq); -extern void nile4_clear_irq_mask(u32 mask); -extern u8 nile4_i8259_iack(void); -extern void nile4_dump_irq_status(void); /* Debug */ -#endif /* !__ASSEMBLY__ */ diff --git a/include/asm-mips/ddb5xxx/ddb5xxx.h b/include/asm-mips/ddb5xxx/ddb5xxx.h index 873c03f2c5f..2f1b191c6ff 100644 --- a/include/asm-mips/ddb5xxx/ddb5xxx.h +++ b/include/asm-mips/ddb5xxx/ddb5xxx.h @@ -174,13 +174,8 @@ static inline void ddb_sync(void) { -/* The DDB5074 doesn't seem to like these accesses. They kill the board on - * interrupt load - */ -#ifndef CONFIG_DDB5074 volatile u32 *p = (volatile u32 *)0xbfc00000; (void)(*p); -#endif } static inline void ddb_out32(u32 offset, u32 val) @@ -260,11 +255,7 @@ extern void ddb_pci_reset_bus(void); /* * include the board dependent part */ -#if defined(CONFIG_DDB5074) -#include <asm/ddb5xxx/ddb5074.h> -#elif defined(CONFIG_DDB5476) -#include <asm/ddb5xxx/ddb5476.h> -#elif defined(CONFIG_DDB5477) +#if defined(CONFIG_DDB5477) #include <asm/ddb5xxx/ddb5477.h> #else #error "Unknown DDB board!" diff --git a/include/asm-mips/emma2rh/emma2rh.h b/include/asm-mips/emma2rh/emma2rh.h new file mode 100644 index 00000000000..4fb8df71caa --- /dev/null +++ b/include/asm-mips/emma2rh/emma2rh.h @@ -0,0 +1,330 @@ +/* + * include/asm-mips/emma2rh/emma2rh.h + * This file is EMMA2RH common header. + * + * Copyright (C) NEC Electronics Corporation 2005-2006 + * + * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_EMMA2RH_EMMA2RH_H +#define __ASM_EMMA2RH_EMMA2RH_H + +/* + * EMMA2RH registers + */ +#define REGBASE 0x10000000 + +#define EMMA2RH_BHIF_STRAP_0 (0x000010+REGBASE) +#define EMMA2RH_BHIF_INT_ST_0 (0x000030+REGBASE) +#define EMMA2RH_BHIF_INT_ST_1 (0x000034+REGBASE) +#define EMMA2RH_BHIF_INT_ST_2 (0x000038+REGBASE) +#define EMMA2RH_BHIF_INT_EN_0 (0x000040+REGBASE) +#define EMMA2RH_BHIF_INT_EN_1 (0x000044+REGBASE) +#define EMMA2RH_BHIF_INT_EN_2 (0x000048+REGBASE) +#define EMMA2RH_BHIF_INT1_EN_0 (0x000050+REGBASE) +#define EMMA2RH_BHIF_INT1_EN_1 (0x000054+REGBASE) +#define EMMA2RH_BHIF_INT1_EN_2 (0x000058+REGBASE) +#define EMMA2RH_BHIF_SW_INT (0x000070+REGBASE) +#define EMMA2RH_BHIF_SW_INT_EN (0x000080+REGBASE) +#define EMMA2RH_BHIF_SW_INT_CLR (0x000090+REGBASE) +#define EMMA2RH_BHIF_MAIN_CTRL (0x0000b4+REGBASE) +#define EMMA2RH_BHIF_EXCEPT_VECT_BASE_ADDRESS (0x0000c0+REGBASE) +#define EMMA2RH_GPIO_DIR (0x110d20+REGBASE) +#define EMMA2RH_GPIO_INT_ST (0x110d30+REGBASE) +#define EMMA2RH_GPIO_INT_MASK (0x110d3c+REGBASE) +#define EMMA2RH_GPIO_INT_MODE (0x110d48+REGBASE) +#define EMMA2RH_GPIO_INT_CND_A (0x110d54+REGBASE) +#define EMMA2RH_GPIO_INT_CND_B (0x110d60+REGBASE) +#define EMMA2RH_PBRD_INT_EN (0x100010+REGBASE) +#define EMMA2RH_PBRD_CLKSEL (0x100028+REGBASE) +#define EMMA2RH_PFUR0_BASE (0x101000+REGBASE) +#define EMMA2RH_PFUR1_BASE (0x102000+REGBASE) +#define EMMA2RH_PFUR2_BASE (0x103000+REGBASE) +#define EMMA2RH_PIIC0_BASE (0x107000+REGBASE) +#define EMMA2RH_PIIC1_BASE (0x108000+REGBASE) +#define EMMA2RH_PIIC2_BASE (0x109000+REGBASE) +#define EMMA2RH_PCI_CONTROL (0x200000+REGBASE) +#define EMMA2RH_PCI_ARBIT_CTR (0x200004+REGBASE) +#define EMMA2RH_PCI_IWIN0_CTR (0x200010+REGBASE) +#define EMMA2RH_PCI_IWIN1_CTR (0x200014+REGBASE) +#define EMMA2RH_PCI_INIT_ESWP (0x200018+REGBASE) +#define EMMA2RH_PCI_INT (0x200020+REGBASE) +#define EMMA2RH_PCI_INT_EN (0x200024+REGBASE) +#define EMMA2RH_PCI_TWIN_CTR (0x200030+REGBASE) +#define EMMA2RH_PCI_TWIN_BADR (0x200034+REGBASE) +#define EMMA2RH_PCI_TWIN0_DADR (0x200038+REGBASE) +#define EMMA2RH_PCI_TWIN1_DADR (0x20003c+REGBASE) + +/* + * Memory map (physical address) + * + * Note most of the following address must be properly aligned by the + * corresponding size. For example, if PCI_IO_SIZE is 16MB, then + * PCI_IO_BASE must be aligned along 16MB boundary. + */ + +/* the actual ram size is detected at run-time */ +#define EMMA2RH_RAM_BASE 0x00000000 +#define EMMA2RH_RAM_SIZE 0x10000000 /* less than 256MB */ + +#define EMMA2RH_IO_BASE 0x10000000 +#define EMMA2RH_IO_SIZE 0x01000000 /* 16 MB */ + +#define EMMA2RH_GENERALIO_BASE 0x11000000 +#define EMMA2RH_GENERALIO_SIZE 0x01000000 /* 16 MB */ + +#define EMMA2RH_PCI_IO_BASE 0x12000000 +#define EMMA2RH_PCI_IO_SIZE 0x02000000 /* 32 MB */ + +#define EMMA2RH_PCI_MEM_BASE 0x14000000 +#define EMMA2RH_PCI_MEM_SIZE 0x08000000 /* 128 MB */ + +#define EMMA2RH_ROM_BASE 0x1c000000 +#define EMMA2RH_ROM_SIZE 0x04000000 /* 64 MB */ + +#define EMMA2RH_PCI_CONFIG_BASE EMMA2RH_PCI_IO_BASE +#define EMMA2RH_PCI_CONFIG_SIZE EMMA2RH_PCI_IO_SIZE + +#define NUM_CPU_IRQ 8 +#define NUM_EMMA2RH_IRQ 96 + +#define CPU_EMMA2RH_CASCADE 2 +#define EMMA2RH_IRQ_BASE 0 + +/* + * emma2rh irq defs + */ + +#define EMMA2RH_IRQ_INT0 (0 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT1 (1 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT2 (2 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT3 (3 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT4 (4 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT5 (5 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT6 (6 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT7 (7 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT8 (8 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT9 (9 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT10 (10 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT11 (11 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT12 (12 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT13 (13 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT14 (14 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT15 (15 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT16 (16 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT17 (17 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT18 (18 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT19 (19 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT20 (20 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT21 (21 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT22 (22 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT23 (23 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT24 (24 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT25 (25 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT26 (26 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT27 (27 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT28 (28 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT29 (29 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT30 (30 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT31 (31 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT32 (32 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT33 (33 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT34 (34 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT35 (35 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT36 (36 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT37 (37 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT38 (38 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT39 (39 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT40 (40 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT41 (41 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT42 (42 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT43 (43 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT44 (44 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT45 (45 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT46 (46 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT47 (47 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT48 (48 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT49 (49 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT50 (50 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT51 (51 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT52 (52 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT53 (53 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT54 (54 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT55 (55 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT56 (56 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT57 (57 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT58 (58 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT59 (59 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT60 (60 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT61 (61 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT62 (62 + EMMA2RH_IRQ_BASE) +#define EMMA2RH_IRQ_INT63 (63 + EMMA2RH_IRQ_BASE) + +#define EMMA2RH_IRQ_PFUR0 EMMA2RH_IRQ_INT49 +#define EMMA2RH_IRQ_PFUR1 EMMA2RH_IRQ_INT50 +#define EMMA2RH_IRQ_PFUR2 EMMA2RH_IRQ_INT51 +#define EMMA2RH_IRQ_PIIC0 EMMA2RH_IRQ_INT56 +#define EMMA2RH_IRQ_PIIC1 EMMA2RH_IRQ_INT57 +#define EMMA2RH_IRQ_PIIC2 EMMA2RH_IRQ_INT58 + +/* + * EMMA2RH Register Access + */ + +#define EMMA2RH_BASE (0xa0000000) + +static inline void emma2rh_sync(void) +{ + volatile u32 *p = (volatile u32 *)0xbfc00000; + (void)(*p); +} + +static inline void emma2rh_out32(u32 offset, u32 val) +{ + *(volatile u32 *)(EMMA2RH_BASE | offset) = val; + emma2rh_sync(); +} + +static inline u32 emma2rh_in32(u32 offset) +{ + u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset); + emma2rh_sync(); + return val; +} + +static inline void emma2rh_out16(u32 offset, u16 val) +{ + *(volatile u16 *)(EMMA2RH_BASE | offset) = val; + emma2rh_sync(); +} + +static inline u16 emma2rh_in16(u32 offset) +{ + u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset); + emma2rh_sync(); + return val; +} + +static inline void emma2rh_out8(u32 offset, u8 val) +{ + *(volatile u8 *)(EMMA2RH_BASE | offset) = val; + emma2rh_sync(); +} + +static inline u8 emma2rh_in8(u32 offset) +{ + u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset); + emma2rh_sync(); + return val; +} + +/** + * IIC registers map + **/ + +/*---------------------------------------------------------------------------*/ +/* CNT - Control register (00H R/W) */ +/*---------------------------------------------------------------------------*/ +#define SPT 0x00000001 +#define STT 0x00000002 +#define ACKE 0x00000004 +#define WTIM 0x00000008 +#define SPIE 0x00000010 +#define WREL 0x00000020 +#define LREL 0x00000040 +#define IICE 0x00000080 +#define CNT_RESERVED 0x000000ff /* reserved bit 0 */ + +#define I2C_EMMA_START (IICE | STT) +#define I2C_EMMA_STOP (IICE | SPT) +#define I2C_EMMA_REPSTART I2C_EMMA_START + +/*---------------------------------------------------------------------------*/ +/* STA - Status register (10H Read) */ +/*---------------------------------------------------------------------------*/ +#define MSTS 0x00000080 +#define ALD 0x00000040 +#define EXC 0x00000020 +#define COI 0x00000010 +#define TRC 0x00000008 +#define ACKD 0x00000004 +#define STD 0x00000002 +#define SPD 0x00000001 + +/*---------------------------------------------------------------------------*/ +/* CSEL - Clock select register (20H R/W) */ +/*---------------------------------------------------------------------------*/ +#define FCL 0x00000080 +#define ND50 0x00000040 +#define CLD 0x00000020 +#define DAD 0x00000010 +#define SMC 0x00000008 +#define DFC 0x00000004 +#define CL 0x00000003 +#define CSEL_RESERVED 0x000000ff /* reserved bit 0 */ + +#define FAST397 0x0000008b +#define FAST297 0x0000008a +#define FAST347 0x0000000b +#define FAST260 0x0000000a +#define FAST130 0x00000008 +#define STANDARD108 0x00000083 +#define STANDARD83 0x00000082 +#define STANDARD95 0x00000003 +#define STANDARD73 0x00000002 +#define STANDARD36 0x00000001 +#define STANDARD71 0x00000000 + +/*---------------------------------------------------------------------------*/ +/* SVA - Slave address register (30H R/W) */ +/*---------------------------------------------------------------------------*/ +#define SVA 0x000000fe + +/*---------------------------------------------------------------------------*/ +/* SHR - Shift register (40H R/W) */ +/*---------------------------------------------------------------------------*/ +#define SR 0x000000ff + +/*---------------------------------------------------------------------------*/ +/* INT - Interrupt register (50H R/W) */ +/* INTM - Interrupt mask register (60H R/W) */ +/*---------------------------------------------------------------------------*/ +#define INTE0 0x00000001 + +/*********************************************************************** + * I2C registers + *********************************************************************** + */ +#define I2C_EMMA_CNT 0x00 +#define I2C_EMMA_STA 0x10 +#define I2C_EMMA_CSEL 0x20 +#define I2C_EMMA_SVA 0x30 +#define I2C_EMMA_SHR 0x40 +#define I2C_EMMA_INT 0x50 +#define I2C_EMMA_INTM 0x60 + +/* + * include the board dependent part + */ +#if defined(CONFIG_MARKEINS) +#include <asm/emma2rh/markeins.h> +#else +#error "Unknown EMMA2RH board!" +#endif + +#endif /* __ASM_EMMA2RH_EMMA2RH_H */ diff --git a/include/asm-mips/emma2rh/markeins.h b/include/asm-mips/emma2rh/markeins.h new file mode 100644 index 00000000000..8fa76679507 --- /dev/null +++ b/include/asm-mips/emma2rh/markeins.h @@ -0,0 +1,76 @@ +/* + * include/asm-mips/emma2rh/markeins.h + * This file is EMMA2RH board depended header. + * + * Copyright (C) NEC Electronics Corporation 2005-2006 + * + * This file based on include/asm-mips/ddb5xxx/ddb5xxx.h + * Copyright 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef MARKEINS_H +#define MARKEINS_H + +#define NUM_EMMA2RH_IRQ_SW 32 +#define NUM_EMMA2RH_IRQ_GPIO 32 + +#define EMMA2RH_SW_CASCADE (EMMA2RH_IRQ_INT7 - EMMA2RH_IRQ_INT0) +#define EMMA2RH_GPIO_CASCADE (EMMA2RH_IRQ_INT46 - EMMA2RH_IRQ_INT0) + +#define EMMA2RH_SW_IRQ_BASE (EMMA2RH_IRQ_BASE + NUM_EMMA2RH_IRQ) +#define EMMA2RH_GPIO_IRQ_BASE (EMMA2RH_SW_IRQ_BASE + NUM_EMMA2RH_IRQ_SW) +#define CPU_IRQ_BASE (EMMA2RH_GPIO_IRQ_BASE + NUM_EMMA2RH_IRQ_GPIO) + +#define EMMA2RH_SW_IRQ_INT0 (0+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT1 (1+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT2 (2+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT3 (3+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT4 (4+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT5 (5+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT6 (6+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT7 (7+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT8 (8+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT9 (9+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT10 (10+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT11 (11+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT12 (12+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT13 (13+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT14 (14+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT15 (15+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT16 (16+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT17 (17+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT18 (18+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT19 (19+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT20 (20+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT21 (21+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT22 (22+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT23 (23+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT24 (24+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT25 (25+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT26 (26+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT27 (27+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT28 (28+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT29 (29+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT30 (30+EMMA2RH_SW_IRQ_BASE) +#define EMMA2RH_SW_IRQ_INT31 (31+EMMA2RH_SW_IRQ_BASE) + +#define MARKEINS_PCI_IRQ_INTA EMMA2RH_GPIO_IRQ_BASE+15 +#define MARKEINS_PCI_IRQ_INTB EMMA2RH_GPIO_IRQ_BASE+16 +#define MARKEINS_PCI_IRQ_INTC EMMA2RH_GPIO_IRQ_BASE+17 +#define MARKEINS_PCI_IRQ_INTD EMMA2RH_GPIO_IRQ_BASE+18 + +#endif /* CONFIG_MARKEINS */ diff --git a/include/asm-mips/fpu.h b/include/asm-mips/fpu.h index b0f50015e25..8bf510a27c6 100644 --- a/include/asm-mips/fpu.h +++ b/include/asm-mips/fpu.h @@ -138,10 +138,9 @@ static inline fpureg_t *get_fpu_regs(struct task_struct *tsk) if (cpu_has_fpu) { if ((tsk == current) && __is_fpu_owner()) _save_fp(current); - return tsk->thread.fpu.hard.fpr; } - return tsk->thread.fpu.soft.fpr; + return tsk->thread.fpu.fpr; } #endif /* _ASM_FPU_H */ diff --git a/include/asm-mips/fpu_emulator.h b/include/asm-mips/fpu_emulator.h index 16cb4d11dd0..2731c38bd7a 100644 --- a/include/asm-mips/fpu_emulator.h +++ b/include/asm-mips/fpu_emulator.h @@ -12,8 +12,8 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. * - * Further private data for which no space exists in mips_fpu_soft_struct. - * This should be subsumed into the mips_fpu_soft_struct structure as + * Further private data for which no space exists in mips_fpu_struct. + * This should be subsumed into the mips_fpu_struct structure as * defined in processor.h as soon as the absurd wired absolute assembler * offsets become dynamic at compile time. * diff --git a/include/asm-mips/futex.h b/include/asm-mips/futex.h index 12d118f1bc9..1f94640becc 100644 --- a/include/asm-mips/futex.h +++ b/include/asm-mips/futex.h @@ -22,51 +22,53 @@ " .set push \n" \ " .set noat \n" \ " .set mips3 \n" \ - "1: ll %1, (%3) # __futex_atomic_op \n" \ + "1: ll %1, %4 # __futex_atomic_op \n" \ " .set mips0 \n" \ " " insn " \n" \ " .set mips3 \n" \ - "2: sc $1, (%3) \n" \ + "2: sc $1, %2 \n" \ " beqzl $1, 1b \n" \ __FUTEX_SMP_SYNC \ "3: \n" \ " .set pop \n" \ " .set mips0 \n" \ " .section .fixup,\"ax\" \n" \ - "4: li %0, %5 \n" \ + "4: li %0, %6 \n" \ " j 2b \n" \ " .previous \n" \ " .section __ex_table,\"a\" \n" \ " "__UA_ADDR "\t1b, 4b \n" \ " "__UA_ADDR "\t2b, 4b \n" \ " .previous \n" \ - : "=r" (ret), "=r" (oldval) \ - : "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \ + : "=r" (ret), "=&r" (oldval), "=R" (*uaddr) \ + : "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT) \ + : "memory"); \ } else if (cpu_has_llsc) { \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " .set mips3 \n" \ - "1: ll %1, (%3) # __futex_atomic_op \n" \ + "1: ll %1, %4 # __futex_atomic_op \n" \ " .set mips0 \n" \ " " insn " \n" \ " .set mips3 \n" \ - "2: sc $1, (%3) \n" \ + "2: sc $1, %2 \n" \ " beqz $1, 1b \n" \ __FUTEX_SMP_SYNC \ "3: \n" \ " .set pop \n" \ " .set mips0 \n" \ " .section .fixup,\"ax\" \n" \ - "4: li %0, %5 \n" \ + "4: li %0, %6 \n" \ " j 2b \n" \ " .previous \n" \ " .section __ex_table,\"a\" \n" \ " "__UA_ADDR "\t1b, 4b \n" \ " "__UA_ADDR "\t2b, 4b \n" \ " .previous \n" \ - : "=r" (ret), "=r" (oldval) \ - : "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT)); \ + : "=r" (ret), "=&r" (oldval), "=R" (*uaddr) \ + : "0" (0), "R" (*uaddr), "Jr" (oparg), "i" (-EFAULT) \ + : "memory"); \ } else \ ret = -ENOSYS; \ } @@ -89,23 +91,23 @@ futex_atomic_op_inuser (int encoded_op, int __user *uaddr) switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("move $1, %z4", ret, oldval, uaddr, oparg); + __futex_atomic_op("move $1, %z5", ret, oldval, uaddr, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("addu $1, %1, %z4", + __futex_atomic_op("addu $1, %1, %z5", ret, oldval, uaddr, oparg); break; case FUTEX_OP_OR: - __futex_atomic_op("or $1, %1, %z4", + __futex_atomic_op("or $1, %1, %z5", ret, oldval, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("and $1, %1, %z4", + __futex_atomic_op("and $1, %1, %z5", ret, oldval, uaddr, ~oparg); break; case FUTEX_OP_XOR: - __futex_atomic_op("xor $1, %1, %z4", + __futex_atomic_op("xor $1, %1, %z5", ret, oldval, uaddr, oparg); break; default: diff --git a/include/asm-mips/mach-ddb5074/mc146818rtc.h b/include/asm-mips/mach-ddb5074/mc146818rtc.h deleted file mode 100644 index 2eb9acb10a5..00000000000 --- a/include/asm-mips/mach-ddb5074/mc146818rtc.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 2001, 03 by Ralf Baechle - * - * RTC routines for PC style attached Dallas chip. - */ -#ifndef __ASM_MACH_DDB5074_MC146818RTC_H -#define __ASM_MACH_DDB5074_MC146818RTC_H - -#include <asm/ddb5xxx/ddb5074.h> -#include <asm/ddb5xxx/ddb5xxx.h> - -#define RTC_PORT(x) (0x70 + (x)) -#define RTC_IRQ 8 - -static inline unsigned char CMOS_READ(unsigned long addr) -{ - return *(volatile unsigned char *)(KSEG1ADDR(DDB_PCI_MEM_BASE)+addr); -} - -static inline void CMOS_WRITE(unsigned char data, unsigned long addr) -{ - *(volatile unsigned char *)(KSEG1ADDR(DDB_PCI_MEM_BASE)+addr) = data; -} - -#define RTC_ALWAYS_BCD 1 - -#endif /* __ASM_MACH_DDB5074_MC146818RTC_H */ diff --git a/include/asm-mips/mach-dec/param.h b/include/asm-mips/mach-dec/param.h deleted file mode 100644 index 3e4f0e39084..00000000000 --- a/include/asm-mips/mach-dec/param.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 by Ralf Baechle - */ -#ifndef __ASM_MACH_DEC_PARAM_H -#define __ASM_MACH_DEC_PARAM_H - -/* - * log2(HZ), change this here if you want another HZ value. This is also - * used in dec_time_init. Minimum is 1, Maximum is 15. - */ -#define LOG_2_HZ 7 -#define HZ (1 << LOG_2_HZ) - -#endif /* __ASM_MACH_DEC_PARAM_H */ diff --git a/include/asm-mips/mach-mips/param.h b/include/asm-mips/mach-emma2rh/irq.h index 805ef6d27d3..bce64244b80 100644 --- a/include/asm-mips/mach-mips/param.h +++ b/include/asm-mips/mach-emma2rh/irq.h @@ -5,9 +5,9 @@ * * Copyright (C) 2003 by Ralf Baechle */ -#ifndef __ASM_MACH_MIPS_PARAM_H -#define __ASM_MACH_MIPS_PARAM_H +#ifndef __ASM_MACH_EMMA2RH_IRQ_H +#define __ASM_MACH_EMMA2RH_IRQ_H -#define HZ 100 /* Internal kernel timer frequency */ +#define NR_IRQS 256 -#endif /* __ASM_MACH_MIPS_PARAM_H */ +#endif /* __ASM_MACH_EMMA2RH_IRQ_H */ diff --git a/include/asm-mips/mach-excite/cpu-feature-overrides.h b/include/asm-mips/mach-excite/cpu-feature-overrides.h new file mode 100644 index 00000000000..abb76b2fd86 --- /dev/null +++ b/include/asm-mips/mach-excite/cpu-feature-overrides.h @@ -0,0 +1,40 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2004 Thomas Koeller <thomas.koeller@baslerweb.com> + */ +#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H + +/* + * Basler eXcite has an RM9122 processor. + */ +#define cpu_has_watch 1 +#define cpu_has_mips16 0 +#define cpu_has_divec 0 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 0 +#define cpu_has_ejtag 0 + +#define cpu_has_llsc 1 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases 0 +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_dsp 0 +#define cpu_icache_snoops_remote_store 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 1 + +#define cpu_has_subset_pcaches 0 + +#define cpu_dcache_line_size() 32 +#define cpu_icache_line_size() 32 +#define cpu_scache_line_size() 32 + +#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */ diff --git a/include/asm-mips/mach-excite/excite.h b/include/asm-mips/mach-excite/excite.h new file mode 100644 index 00000000000..c52610de2b3 --- /dev/null +++ b/include/asm-mips/mach-excite/excite.h @@ -0,0 +1,155 @@ +#ifndef __EXCITE_H__ +#define __EXCITE_H__ + +#include <linux/config.h> +#include <linux/init.h> +#include <asm/addrspace.h> +#include <asm/types.h> + +#define EXCITE_CPU_EXT_CLOCK 100000000 + +#if !defined(__ASSEMBLER__) +void __init excite_kgdb_init(void); +void excite_procfs_init(void); +extern unsigned long memsize; +extern char modetty[]; +extern u32 unit_id; +#endif + +/* Base name for XICAP devices */ +#define XICAP_NAME "xicap_gpi" + +/* OCD register offsets */ +#define LKB0 0x0038 +#define LKB5 0x0128 +#define LKM5 0x012C +#define LKB7 0x0138 +#define LKM7 0x013c +#define LKB8 0x0140 +#define LKM8 0x0144 +#define LKB9 0x0148 +#define LKM9 0x014c +#define LKB10 0x0150 +#define LKM10 0x0154 +#define LKB11 0x0158 +#define LKM11 0x015c +#define LKB12 0x0160 +#define LKM12 0x0164 +#define LKB13 0x0168 +#define LKM13 0x016c +#define LDP0 0x0200 +#define LDP1 0x0210 +#define LDP2 0x0220 +#define LDP3 0x0230 +#define INTPIN0 0x0A40 +#define INTPIN1 0x0A44 +#define INTPIN2 0x0A48 +#define INTPIN3 0x0A4C +#define INTPIN4 0x0A50 +#define INTPIN5 0x0A54 +#define INTPIN6 0x0A58 +#define INTPIN7 0x0A5C + + + + +/* TITAN register offsets */ +#define CPRR 0x0004 +#define CPDSR 0x0008 +#define CPTC0R 0x000c +#define CPTC1R 0x0010 +#define CPCFG0 0x0020 +#define CPCFG1 0x0024 +#define CPDST0A 0x0028 +#define CPDST0B 0x002c +#define CPDST1A 0x0030 +#define CPDST1B 0x0034 +#define CPXDSTA 0x0038 +#define CPXDSTB 0x003c +#define CPXCISRA 0x0048 +#define CPXCISRB 0x004c +#define CPGIG0ER 0x0050 +#define CPGIG1ER 0x0054 +#define CPGRWL 0x0068 +#define CPURSLMT 0x00f8 +#define UACFG 0x0200 +#define UAINTS 0x0204 +#define SDRXFCIE 0x4828 +#define SDTXFCIE 0x4928 +#define INTP0Status0 0x1B00 +#define INTP0Mask0 0x1B04 +#define INTP0Set0 0x1B08 +#define INTP0Clear0 0x1B0C +#define GXCFG 0x5000 +#define GXDMADRPFX 0x5018 +#define GXDMA_DESCADR 0x501c +#define GXCH0TDESSTRT 0x5054 + +/* IRQ definitions */ +#define NMICONFIG 0xac0 +#define TITAN_MSGINT 0xc4 +#define TITAN_IRQ ((TITAN_MSGINT / 0x20) + 2) +#define FPGA0_MSGINT 0x5a +#define FPGA0_IRQ ((FPGA0_MSGINT / 0x20) + 2) +#define FPGA1_MSGINT 0x7b +#define FPGA1_IRQ ((FPGA1_MSGINT / 0x20) + 2) +#define PHY_MSGINT 0x9c +#define PHY_IRQ ((PHY_MSGINT / 0x20) + 2) + +#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE) +/* Pre-release units used interrupt pin #9 */ +#define USB_IRQ 11 +#else +/* Re-designed units use interrupt pin #1 */ +#define USB_MSGINT 0x39 +#define USB_IRQ ((USB_MSGINT / 0x20) + 2) +#endif +#define TIMER_IRQ 12 + + +/* Device address ranges */ +#define EXCITE_OFFS_OCD 0x1fffc000 +#define EXCITE_SIZE_OCD (16 * 1024) +#define EXCITE_PHYS_OCD CPHYSADDR(EXCITE_OFFS_OCD) +#define EXCITE_ADDR_OCD CKSEG1ADDR(EXCITE_OFFS_OCD) + +#define EXCITE_OFFS_SCRAM 0x1fffa000 +#define EXCITE_SIZE_SCRAM (8 << 10) +#define EXCITE_PHYS_SCRAM CPHYSADDR(EXCITE_OFFS_SCRAM) +#define EXCITE_ADDR_SCRAM CKSEG1ADDR(EXCITE_OFFS_SCRAM) + +#define EXCITE_OFFS_PCI_IO 0x1fff8000 +#define EXCITE_SIZE_PCI_IO (8 << 10) +#define EXCITE_PHYS_PCI_IO CPHYSADDR(EXCITE_OFFS_PCI_IO) +#define EXCITE_ADDR_PCI_IO CKSEG1ADDR(EXCITE_OFFS_PCI_IO) + +#define EXCITE_OFFS_TITAN 0x1fff0000 +#define EXCITE_SIZE_TITAN (32 << 10) +#define EXCITE_PHYS_TITAN CPHYSADDR(EXCITE_OFFS_TITAN) +#define EXCITE_ADDR_TITAN CKSEG1ADDR(EXCITE_OFFS_TITAN) + +#define EXCITE_OFFS_PCI_MEM 0x1ffe0000 +#define EXCITE_SIZE_PCI_MEM (64 << 10) +#define EXCITE_PHYS_PCI_MEM CPHYSADDR(EXCITE_OFFS_PCI_MEM) +#define EXCITE_ADDR_PCI_MEM CKSEG1ADDR(EXCITE_OFFS_PCI_MEM) + +#define EXCITE_OFFS_FPGA 0x1ffdc000 +#define EXCITE_SIZE_FPGA (16 << 10) +#define EXCITE_PHYS_FPGA CPHYSADDR(EXCITE_OFFS_FPGA) +#define EXCITE_ADDR_FPGA CKSEG1ADDR(EXCITE_OFFS_FPGA) + +#define EXCITE_OFFS_NAND 0x1ffd8000 +#define EXCITE_SIZE_NAND (16 << 10) +#define EXCITE_PHYS_NAND CPHYSADDR(EXCITE_OFFS_NAND) +#define EXCITE_ADDR_NAND CKSEG1ADDR(EXCITE_OFFS_NAND) + +#define EXCITE_OFFS_BOOTROM 0x1f000000 +#define EXCITE_SIZE_BOOTROM (8 << 20) +#define EXCITE_PHYS_BOOTROM CPHYSADDR(EXCITE_OFFS_BOOTROM) +#define EXCITE_ADDR_BOOTROM CKSEG1ADDR(EXCITE_OFFS_BOOTROM) + +/* FPGA address offsets */ +#define EXCITE_FPGA_DPR 0x0104 /* dual-ported ram */ +#define EXCITE_FPGA_SYSCTL 0x0200 /* system control register block */ + +#endif /* __EXCITE_H__ */ diff --git a/include/asm-mips/mach-excite/excite_nandflash.h b/include/asm-mips/mach-excite/excite_nandflash.h new file mode 100644 index 00000000000..c4cf6140622 --- /dev/null +++ b/include/asm-mips/mach-excite/excite_nandflash.h @@ -0,0 +1,7 @@ +#ifndef __EXCITE_NANDFLASH_H__ +#define __EXCITE_NANDFLASH_H__ + +/* Resource names */ +#define EXCITE_NANDFLASH_RESOURCE_REGS "excite_nandflash_regs" + +#endif /* __EXCITE_NANDFLASH_H__ */ diff --git a/include/asm-mips/mach-excite/rm9k_eth.h b/include/asm-mips/mach-excite/rm9k_eth.h new file mode 100644 index 00000000000..94705a46f72 --- /dev/null +++ b/include/asm-mips/mach-excite/rm9k_eth.h @@ -0,0 +1,23 @@ +#if !defined(__RM9K_ETH_H__) +#define __RM9K_ETH_H__ + +#define RM9K_GE_NAME "rm9k_ge" + +/* Resource names */ +#define RM9K_GE_RESOURCE_MAC "rm9k_ge_mac" +#define RM9K_GE_RESOURCE_MSTAT "rm9k_ge_mstat" +#define RM9K_GE_RESOURCE_PKTPROC "rm9k_ge_pktproc" +#define RM9K_GE_RESOURCE_XDMA "rm9k_ge_xdma" +#define RM9K_GE_RESOURCE_FIFO_RX "rm9k_ge_fifo_rx" +#define RM9K_GE_RESOURCE_FIFO_TX "rm9k_ge_fifo_tx" +#define RM9K_GE_RESOURCE_FIFOMEM_RX "rm9k_ge_fifo_memory_rx" +#define RM9K_GE_RESOURCE_FIFOMEM_TX "rm9k_ge_fifo_memory_tx" +#define RM9K_GE_RESOURCE_PHY "rm9k_ge_phy" +#define RM9K_GE_RESOURCE_DMADESC_RX "rm9k_ge_dmadesc_rx" +#define RM9K_GE_RESOURCE_DMADESC_TX "rm9k_ge_dmadesc_tx" +#define RM9K_GE_RESOURCE_IRQ_MAIN "rm9k_ge_irq_main" +#define RM9K_GE_RESOURCE_IRQ_PHY "rm9k_ge_irq_phy" +#define RM9K_GE_RESOURCE_GPI_SLICE "rm9k_ge_gpi_slice" +#define RM9K_GE_RESOURCE_MDIO_CHANNEL "rm9k_ge_mdio_channel" + +#endif /* !defined(__RM9K_ETH_H__) */ diff --git a/include/asm-mips/mach-excite/rm9k_wdt.h b/include/asm-mips/mach-excite/rm9k_wdt.h new file mode 100644 index 00000000000..3fa3c08d2da --- /dev/null +++ b/include/asm-mips/mach-excite/rm9k_wdt.h @@ -0,0 +1,12 @@ +#ifndef __RM9K_WDT_H__ +#define __RM9K_WDT_H__ + +/* Device name */ +#define WDT_NAME "wdt_gpi" + +/* Resource names */ +#define WDT_RESOURCE_REGS "excite_watchdog_regs" +#define WDT_RESOURCE_IRQ "excite_watchdog_irq" +#define WDT_RESOURCE_COUNTER "excite_watchdog_counter" + +#endif /* __RM9K_WDT_H__ */ diff --git a/include/asm-mips/mach-excite/rm9k_xicap.h b/include/asm-mips/mach-excite/rm9k_xicap.h new file mode 100644 index 00000000000..009577734a8 --- /dev/null +++ b/include/asm-mips/mach-excite/rm9k_xicap.h @@ -0,0 +1,16 @@ +#ifndef __EXCITE_XICAP_H__ +#define __EXCITE_XICAP_H__ + + +/* Resource names */ +#define XICAP_RESOURCE_FIFO_RX "xicap_fifo_rx" +#define XICAP_RESOURCE_FIFO_TX "xicap_fifo_tx" +#define XICAP_RESOURCE_XDMA "xicap_xdma" +#define XICAP_RESOURCE_DMADESC "xicap_dmadesc" +#define XICAP_RESOURCE_PKTPROC "xicap_pktproc" +#define XICAP_RESOURCE_IRQ "xicap_irq" +#define XICAP_RESOURCE_GPI_SLICE "xicap_gpi_slice" +#define XICAP_RESOURCE_FIFO_BLK "xicap_fifo_blocks" +#define XICAP_RESOURCE_PKT_STREAM "xicap_pkt_stream" + +#endif /* __EXCITE_XICAP_H__ */ diff --git a/include/asm-mips/mach-generic/param.h b/include/asm-mips/mach-generic/param.h deleted file mode 100644 index a0d12f964e4..00000000000 --- a/include/asm-mips/mach-generic/param.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 by Ralf Baechle - */ -#ifndef __ASM_MACH_GENERIC_PARAM_H -#define __ASM_MACH_GENERIC_PARAM_H - -#define HZ 1000 /* Internal kernel timer frequency */ - -#endif /* __ASM_MACH_GENERIC_PARAM_H */ diff --git a/include/asm-mips/mach-ip22/cpu-feature-overrides.h b/include/asm-mips/mach-ip22/cpu-feature-overrides.h index 2a37bedb405..f7c5dc8a533 100644 --- a/include/asm-mips/mach-ip22/cpu-feature-overrides.h +++ b/include/asm-mips/mach-ip22/cpu-feature-overrides.h @@ -13,7 +13,7 @@ */ #define cpu_has_tlb 1 #define cpu_has_4kex 1 -#define cpu_has_4kcache 1 +#define cpu_has_4k_cache 1 #define cpu_has_fpu 1 #define cpu_has_32fpr 1 #define cpu_has_counter 1 diff --git a/include/asm-mips/mach-ip27/cpu-feature-overrides.h b/include/asm-mips/mach-ip27/cpu-feature-overrides.h index 2d2f5b91e47..19c2d135985 100644 --- a/include/asm-mips/mach-ip27/cpu-feature-overrides.h +++ b/include/asm-mips/mach-ip27/cpu-feature-overrides.h @@ -31,6 +31,9 @@ #define cpu_has_nofpuex 0 #define cpu_has_64bits 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 + #define cpu_has_subset_pcaches 1 #define cpu_dcache_line_size() 32 diff --git a/include/asm-mips/mach-ip32/cpu-feature-overrides.h b/include/asm-mips/mach-ip32/cpu-feature-overrides.h index 36070b5654a..f0ef1ac9ecd 100644 --- a/include/asm-mips/mach-ip32/cpu-feature-overrides.h +++ b/include/asm-mips/mach-ip32/cpu-feature-overrides.h @@ -38,6 +38,8 @@ #define cpu_has_vtag_icache 0 #define cpu_has_ic_fills_f_dc 0 #define cpu_has_dsp 0 +#define cpu_has_4k_cache 1 + #define cpu_has_mips32r1 0 #define cpu_has_mips32r2 0 diff --git a/include/asm-mips/mach-jazz/param.h b/include/asm-mips/mach-jazz/param.h deleted file mode 100644 index 639763a517b..00000000000 --- a/include/asm-mips/mach-jazz/param.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 by Ralf Baechle - */ -#ifndef __ASM_MACH_JAZZ_PARAM_H -#define __ASM_MACH_JAZZ_PARAM_H - -/* - * Jazz is currently using the internal 100Hz timer of the R4030 - */ -#define HZ 100 /* Internal kernel timer frequency */ - -#endif /* __ASM_MACH_JAZZ_PARAM_H */ diff --git a/include/asm-mips/mach-mips/cpu-feature-overrides.h b/include/asm-mips/mach-mips/cpu-feature-overrides.h index e06af6c86f8..12c937283bb 100644 --- a/include/asm-mips/mach-mips/cpu-feature-overrides.h +++ b/include/asm-mips/mach-mips/cpu-feature-overrides.h @@ -17,7 +17,7 @@ #ifdef CONFIG_CPU_MIPS32 #define cpu_has_tlb 1 #define cpu_has_4kex 1 -#define cpu_has_4kcache 1 +#define cpu_has_4k_cache 1 /* #define cpu_has_fpu ? */ /* #define cpu_has_32fpr ? */ #define cpu_has_counter 1 @@ -47,7 +47,7 @@ #ifdef CONFIG_CPU_MIPS64 #define cpu_has_tlb 1 #define cpu_has_4kex 1 -#define cpu_has_4kcache 1 +#define cpu_has_4k_cache 1 /* #define cpu_has_fpu ? */ /* #define cpu_has_32fpr ? */ #define cpu_has_counter 1 diff --git a/include/asm-mips/mach-qemu/param.h b/include/asm-mips/mach-qemu/param.h deleted file mode 100644 index cb30ee490ae..00000000000 --- a/include/asm-mips/mach-qemu/param.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 by Ralf Baechle - */ -#ifndef __ASM_MACH_QEMU_PARAM_H -#define __ASM_MACH_QEMU_PARAM_H - -#define HZ 100 /* Internal kernel timer frequency */ - -#endif /* __ASM_MACH_QEMU_PARAM_H */ diff --git a/include/asm-mips/mach-rm200/cpu-feature-overrides.h b/include/asm-mips/mach-rm200/cpu-feature-overrides.h index 91e7cf5f2bf..11410ae10d3 100644 --- a/include/asm-mips/mach-rm200/cpu-feature-overrides.h +++ b/include/asm-mips/mach-rm200/cpu-feature-overrides.h @@ -14,7 +14,7 @@ #define cpu_has_tlb 1 #define cpu_has_4kex 1 -#define cpu_has_4kcache 1 +#define cpu_has_4k_cache 1 #define cpu_has_fpu 1 #define cpu_has_32fpr 1 #define cpu_has_counter 1 @@ -35,10 +35,8 @@ #define cpu_has_nofpuex 0 #define cpu_has_64bits 1 -#define cpu_has_subset_pcaches 0 /* No S-cache on R5000 I think ... */ #define cpu_dcache_line_size() 32 #define cpu_icache_line_size() 32 -#define cpu_scache_line_size() 0 /* No S-cache on R5000 I think ... */ #define cpu_has_mips32r1 0 #define cpu_has_mips32r2 0 diff --git a/include/asm-mips/mach-sim/cpu-feature-overrides.h b/include/asm-mips/mach-sim/cpu-feature-overrides.h index cadbe8eda79..d9653e47d5f 100644 --- a/include/asm-mips/mach-sim/cpu-feature-overrides.h +++ b/include/asm-mips/mach-sim/cpu-feature-overrides.h @@ -16,7 +16,7 @@ #ifdef CONFIG_CPU_MIPS32 #define cpu_has_tlb 1 #define cpu_has_4kex 1 -#define cpu_has_4kcache 1 +#define cpu_has_4k_cache 1 #define cpu_has_fpu 0 /* #define cpu_has_32fpr ? */ #define cpu_has_counter 1 @@ -41,7 +41,7 @@ #ifdef CONFIG_CPU_MIPS64 #define cpu_has_tlb 1 #define cpu_has_4kex 1 -#define cpu_has_4kcache 1 +#define cpu_has_4k_cache 1 /* #define cpu_has_fpu ? */ /* #define cpu_has_32fpr ? */ #define cpu_has_counter 1 diff --git a/include/asm-mips/mach-wrppmc/mach-gt64120.h b/include/asm-mips/mach-wrppmc/mach-gt64120.h new file mode 100644 index 00000000000..ba9205a0458 --- /dev/null +++ b/include/asm-mips/mach-wrppmc/mach-gt64120.h @@ -0,0 +1,84 @@ +/* + * This is a direct copy of the ev96100.h file, with a global + * search and replace. The numbers are the same. + * + * The reason I'm duplicating this is so that the 64120/96100 + * defines won't be confusing in the source code. + */ +#ifndef __ASM_MIPS_GT64120_H +#define __ASM_MIPS_GT64120_H + +/* + * This is the CPU physical memory map of PPMC Board: + * + * 0x00000000-0x03FFFFFF - 64MB SDRAM (SCS[0]#) + * 0x1C000000-0x1C000000 - LED (CS0) + * 0x1C800000-0x1C800007 - UART 16550 port (CS1) + * 0x1F000000-0x1F000000 - MailBox (CS3) + * 0x1FC00000-0x20000000 - 4MB Flash (BOOT CS) + */ + +#define WRPPMC_SDRAM_SCS0_BASE 0x00000000 +#define WRPPMC_SDRAM_SCS0_SIZE 0x04000000 + +#define WRPPMC_UART16550_BASE 0x1C800000 +#define WRPPMC_UART16550_CLOCK 3686400 /* 3.68MHZ */ + +#define WRPPMC_LED_BASE 0x1C000000 +#define WRPPMC_MBOX_BASE 0x1F000000 + +#define WRPPMC_BOOTROM_BASE 0x1FC00000 +#define WRPPMC_BOOTROM_SIZE 0x00400000 /* 4M Flash */ + +#define WRPPMC_MIPS_TIMER_IRQ 7 /* MIPS compare/count timer interrupt */ +#define WRPPMC_UART16550_IRQ 6 +#define WRPPMC_PCI_INTA_IRQ 3 + +/* + * PCI Bus I/O and Memory resources allocation + * + * NOTE: We only have PCI_0 hose interface + */ +#define GT_PCI_MEM_BASE 0x13000000UL +#define GT_PCI_MEM_SIZE 0x02000000UL +#define GT_PCI_IO_BASE 0x11000000UL +#define GT_PCI_IO_SIZE 0x02000000UL +#define GT_ISA_IO_BASE PCI_IO_BASE + +/* + * PCI interrupts will come in on either the INTA or INTD interrups lines, + * which are mapped to the #2 and #5 interrupt pins of the MIPS. On our + * boards, they all either come in on IntD or they all come in on IntA, they + * aren't mixed. There can be numerous PCI interrupts, so we keep a list of the + * "requested" interrupt numbers and go through the list whenever we get an + * IntA/D. + * + * Interrupts < 8 are directly wired to the processor; PCI INTA is 8 and + * INTD is 11. + */ +#define GT_TIMER 4 +#define GT_INTA 2 +#define GT_INTD 5 + +#ifndef __ASSEMBLY__ + +/* + * GT64120 internal register space base address + */ +extern unsigned long gt64120_base; + +#define GT64120_BASE (gt64120_base) + +/* define WRPPMC_EARLY_DEBUG to enable early output something to UART */ +#undef WRPPMC_EARLY_DEBUG + +#ifdef WRPPMC_EARLY_DEBUG +extern void wrppmc_led_on(int mask); +extern void wrppmc_led_off(int mask); +extern void wrppmc_early_printk(const char *fmt, ...); +#else +#define wrppmc_early_printk(fmt, ...) do {} while (0) +#endif /* WRPPMC_EARLY_DEBUG */ + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_MIPS_GT64120_H */ diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h index 5af7517fce8..98b68089aa5 100644 --- a/include/asm-mips/mipsregs.h +++ b/include/asm-mips/mipsregs.h @@ -1451,12 +1451,10 @@ static inline void __emt(unsigned int previous) { if ((previous & __EMT_ENABLE)) __asm__ __volatile__( - " .set noreorder \n" " .set mips32r2 \n" " .word 0x41600be1 # emt \n" " ehb \n" - " .set mips0 \n" - " .set reorder \n"); + " .set mips0 \n"); } static inline void __ehb(void) diff --git a/include/asm-mips/mmzone.h b/include/asm-mips/mmzone.h index 7bde4432092..f6bd2e0c45a 100644 --- a/include/asm-mips/mmzone.h +++ b/include/asm-mips/mmzone.h @@ -14,17 +14,6 @@ #define kvaddr_to_nid(kvaddr) pa_to_nid(__pa(kvaddr)) #define pfn_to_nid(pfn) pa_to_nid((pfn) << PAGE_SHIFT) -#define pfn_valid(pfn) \ -({ \ - unsigned long __pfn = (pfn); \ - int __n = pfn_to_nid(__pfn); \ - ((__n >= 0) ? (__pfn < NODE_DATA(__n)->node_start_pfn + \ - NODE_DATA(__n)->node_spanned_pages) : 0);\ -}) - -/* XXX: FIXME -- wli */ -#define kern_addr_valid(addr) (0) - #endif /* CONFIG_DISCONTIGMEM */ #endif /* _ASM_MMZONE_H_ */ diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h index 4035ec79ecd..3d262c01521 100644 --- a/include/asm-mips/page.h +++ b/include/asm-mips/page.h @@ -145,6 +145,25 @@ typedef struct { unsigned long pgprot; } pgprot_t; #endif #endif +#ifdef CONFIG_FLATMEM + +#define pfn_valid(pfn) ((pfn) < max_mapnr) + +#elif defined(CONFIG_NEED_MULTIPLE_NODES) + +#define pfn_valid(pfn) \ +({ \ + unsigned long __pfn = (pfn); \ + int __n = pfn_to_nid(__pfn); \ + ((__n >= 0) ? (__pfn < NODE_DATA(__n)->node_start_pfn + \ + NODE_DATA(__n)->node_spanned_pages) \ + : 0); \ +}) + +#else +#error Provide a definition of pfn_valid +#endif + #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) diff --git a/include/asm-mips/param.h b/include/asm-mips/param.h index 2bead8273ce..1d9bb8c5ab2 100644 --- a/include/asm-mips/param.h +++ b/include/asm-mips/param.h @@ -11,7 +11,7 @@ #ifdef __KERNEL__ -# include <param.h> /* Internal kernel timer frequency */ +# define HZ CONFIG_HZ /* Internal kernel timer frequency */ # define USER_HZ 100 /* .. some user interfaces are in "ticks" */ # define CLOCKS_PER_SEC (USER_HZ) /* like times() */ #endif diff --git a/include/asm-mips/pci/bridge.h b/include/asm-mips/pci/bridge.h index b4ee995c56e..0c45e7598f3 100644 --- a/include/asm-mips/pci/bridge.h +++ b/include/asm-mips/pci/bridge.h @@ -15,6 +15,7 @@ #include <linux/types.h> #include <linux/pci.h> #include <asm/xtalk/xwidget.h> /* generic widget header */ +#include <asm/sn/types.h> /* I/O page size */ @@ -848,4 +849,6 @@ struct bridge_controller { extern void register_bridge_irq(unsigned int irq); extern int request_bridge_irq(struct bridge_controller *bc); +extern struct pci_ops bridge_pci_ops; + #endif /* _ASM_PCI_BRIDGE_H */ diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h index d0af2a3b015..be75cca20e8 100644 --- a/include/asm-mips/pgtable.h +++ b/include/asm-mips/pgtable.h @@ -379,9 +379,7 @@ static inline void update_mmu_cache(struct vm_area_struct *vma, __update_cache(vma, address, pte); } -#ifndef CONFIG_NEED_MULTIPLE_NODES #define kern_addr_valid(addr) (1) -#endif #ifdef CONFIG_64BIT_PHYS_ADDR extern int remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot); diff --git a/include/asm-mips/processor.h b/include/asm-mips/processor.h index 0fb75f0762e..83936469fe8 100644 --- a/include/asm-mips/processor.h +++ b/include/asm-mips/processor.h @@ -71,11 +71,6 @@ extern unsigned int vced_count, vcei_count; typedef __u64 fpureg_t; -struct mips_fpu_hard_struct { - fpureg_t fpr[NUM_FPU_REGS]; - unsigned int fcr31; -}; - /* * It would be nice to add some more fields for emulator statistics, but there * are a number of fixed offsets in offset.h and elsewhere that would have to @@ -83,18 +78,13 @@ struct mips_fpu_hard_struct { * the FPU emulator for now. See asm-mips/fpu_emulator.h. */ -struct mips_fpu_soft_struct { +struct mips_fpu_struct { fpureg_t fpr[NUM_FPU_REGS]; unsigned int fcr31; }; -union mips_fpu_union { - struct mips_fpu_hard_struct hard; - struct mips_fpu_soft_struct soft; -}; - #define INIT_FPU { \ - {{0,},} \ + {0,} \ } #define NUM_DSP_REGS 6 @@ -133,7 +123,7 @@ struct thread_struct { unsigned long cp0_status; /* Saved fpu/fpu emulator stuff. */ - union mips_fpu_union fpu; + struct mips_fpu_struct fpu; #ifdef CONFIG_MIPS_MT_FPAFF /* Emulated instruction count */ unsigned long emulated_fp; diff --git a/include/asm-mips/qemu.h b/include/asm-mips/qemu.h index 905c3958590..531caf44560 100644 --- a/include/asm-mips/qemu.h +++ b/include/asm-mips/qemu.h @@ -21,4 +21,10 @@ */ #define QEMU_C0_COUNTER_CLOCK 100000000 +/* + * Magic qemu system control location. + */ +#define QEMU_RESTART_REG 0xBFBF0000 +#define QEMU_HALT_REG 0xBFBF0004 + #endif /* __ASM_QEMU_H */ diff --git a/include/asm-mips/rm9k-ocd.h b/include/asm-mips/rm9k-ocd.h new file mode 100644 index 00000000000..b0b80d9ecf9 --- /dev/null +++ b/include/asm-mips/rm9k-ocd.h @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2004 by Basler Vision Technologies AG + * Author: Thomas Koeller <thomas.koeller@baslerweb.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#if !defined(_ASM_RM9K_OCD_H) +#define _ASM_RM9K_OCD_H + +#include <linux/types.h> +#include <linux/spinlock.h> +#include <asm/io.h> + +extern volatile void __iomem * const ocd_base; +extern volatile void __iomem * const titan_base; + +#define ocd_addr(__x__) (ocd_base + (__x__)) +#define titan_addr(__x__) (titan_base + (__x__)) +#define scram_addr(__x__) (scram_base + (__x__)) + +/* OCD register access */ +#define ocd_readl(__offs__) __raw_readl(ocd_addr(__offs__)) +#define ocd_readw(__offs__) __raw_readw(ocd_addr(__offs__)) +#define ocd_readb(__offs__) __raw_readb(ocd_addr(__offs__)) +#define ocd_writel(__val__, __offs__) \ + __raw_writel((__val__), ocd_addr(__offs__)) +#define ocd_writew(__val__, __offs__) \ + __raw_writew((__val__), ocd_addr(__offs__)) +#define ocd_writeb(__val__, __offs__) \ + __raw_writeb((__val__), ocd_addr(__offs__)) + +/* TITAN register access - 32 bit-wide only */ +#define titan_readl(__offs__) __raw_readl(titan_addr(__offs__)) +#define titan_writel(__val__, __offs__) \ + __raw_writel((__val__), titan_addr(__offs__)) + +/* Protect access to shared TITAN registers */ +extern spinlock_t titan_lock; +extern int titan_irqflags; +#define lock_titan_regs() spin_lock_irqsave(&titan_lock, titan_irqflags) +#define unlock_titan_regs() spin_unlock_irqrestore(&titan_lock, titan_irqflags) + +#endif /* !defined(_ASM_RM9K_OCD_H) */ diff --git a/include/asm-mips/sn/addrs.h b/include/asm-mips/sn/addrs.h index 2b5cef1ba37..6c8a5577ddf 100644 --- a/include/asm-mips/sn/addrs.h +++ b/include/asm-mips/sn/addrs.h @@ -27,13 +27,8 @@ #ifndef __ASSEMBLY__ -#if defined(CONFIG_SGI_IO) /* FIXME */ -#define PS_UINT_CAST (__psunsigned_t) -#define UINT64_CAST (__uint64_t) -#else /* CONFIG_SGI_IO */ #define PS_UINT_CAST (unsigned long) #define UINT64_CAST (unsigned long) -#endif /* CONFIG_SGI_IO */ #define HUBREG_CAST (volatile hubreg_t *) @@ -253,14 +248,6 @@ * for _x. */ -#ifdef _STANDALONE - -/* DO NOT USE THESE DIRECTLY IN THE KERNEL. SEE BELOW. */ -#define LOCAL_HUB(_x) (HUBREG_CAST (IALIAS_BASE + (_x))) -#define REMOTE_HUB(_n, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ - 0x800000 + (_x))) -#endif /* _STANDALONE */ - /* * WARNING: * When certain Hub chip workaround are defined, it's not sufficient @@ -327,20 +314,6 @@ PHYS_TO_K0(NODE_OFFSET(nasid) | ARCS_SPB_OFFSET) #define ARCS_SPB_SIZE 0x0400 -#ifdef _STANDALONE - -#define ARCS_TVECTOR_OFFSET 0x2800 -#define ARCS_PVECTOR_OFFSET 0x2c00 - -/* - * These addresses are used by the master CPU to install the transfer - * and private vectors. All others use the SPB to find them. - */ -#define TVADDR (NODE_CAC_BASE(get_nasid()) + ARCS_TVECTOR_OFFSET) -#define PVADDR (NODE_CAC_BASE(get_nasid()) + ARCS_PVECTOR_OFFSET) - -#endif /* _STANDALONE */ - #define KLDIR_OFFSET 0x2000 #define KLDIR_ADDR(nasid) \ TO_NODE_UNCAC((nasid), KLDIR_OFFSET) diff --git a/include/asm-mips/sn/sn0/sn0_fru.h b/include/asm-mips/sn/fru.h index 82c6377c275..b3e3606723b 100644 --- a/include/asm-mips/sn/sn0/sn0_fru.h +++ b/include/asm-mips/sn/fru.h @@ -6,10 +6,10 @@ * Derived from IRIX <sys/SN/SN0/sn0_fru.h> * * Copyright (C) 1992 - 1997, 1999 Silcon Graphics, Inc. - * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) + * Copyright (C) 1999, 2006 Ralf Baechle (ralf@linux-mips) */ -#ifndef _ASM_SN_SN0_SN0_FRU_H -#define _ASM_SN_SN0_SN0_FRU_H +#ifndef __ASM_SN_FRU_H +#define __ASM_SN_FRU_H #define MAX_DIMMS 8 /* max # of dimm banks */ #define MAX_PCIDEV 8 /* max # of pci devices on a pci bus */ @@ -41,4 +41,4 @@ typedef struct kf_pci_bus_s { /* confidence level that the pci dev is bad */ } kf_pci_bus_t; -#endif /* _ASM_SN_SN0_SN0_FRU_H */ +#endif /* __ASM_SN_FRU_H */ diff --git a/include/asm-mips/sn/klconfig.h b/include/asm-mips/sn/klconfig.h index 9709ff701d9..dc706268d2c 100644 --- a/include/asm-mips/sn/klconfig.h +++ b/include/asm-mips/sn/klconfig.h @@ -37,7 +37,7 @@ //#include <sys/SN/router.h> // XXX Stolen from <sys/SN/router.h>: #define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */ -#include <asm/sn/sn0/sn0_fru.h> +#include <asm/sn/fru.h> //#include <sys/graph.h> //#include <sys/xtalk/xbow.h> @@ -54,32 +54,21 @@ #include <asm/sn/agent.h> #include <asm/arc/types.h> #include <asm/arc/hinv.h> -#if defined(CONFIG_SGI_IO) || defined(CONFIG_SGI_IP35) +#if defined(CONFIG_SGI_IP35) // The hack file has to be before vector and after sn0_fru.... #include <asm/hack.h> #include <asm/sn/vector.h> #include <asm/xtalk/xtalk.h> -#endif /* CONFIG_SGI_IO || CONFIG_SGI_IP35 */ +#endif /* CONFIG_SGI_IP35 */ #endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */ #define KLCFGINFO_MAGIC 0xbeedbabe -#ifdef FRUTEST -typedef u64 klconf_off_t; -#else typedef s32 klconf_off_t; -#endif /* * Some IMPORTANT OFFSETS. These are the offsets on all NODES. */ -#if 0 -#define RAMBASE 0 -#define ARCSSPB_OFF 0x1000 /* shift it to sys/arcs/spb.h */ - -#define OFF_HWGRAPH 0 -#endif - #define MAX_MODULE_ID 255 #define SIZE_PAD 4096 /* 4k padding for structures */ /* @@ -134,15 +123,9 @@ typedef s32 klconf_off_t; typedef struct console_s { -#if defined(CONFIG_SGI_IO) /* FIXME */ - __psunsigned_t uart_base; - __psunsigned_t config_base; - __psunsigned_t memory_base; -#else unsigned long uart_base; unsigned long config_base; unsigned long memory_base; -#endif short baud; short flag; int type; @@ -174,10 +157,6 @@ typedef struct kl_config_hdr { #define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid))) -#if 0 -#define KL_CONFIG_MALLOC_HDR(_nasid) \ - (KL_CONFIG_HDR(_nasid)->ch_malloc_hdr) -#endif #define KL_CONFIG_INFO_OFFSET(_nasid) \ (KL_CONFIG_HDR(_nasid)->ch_board_info) #define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \ @@ -197,23 +176,13 @@ typedef struct kl_config_hdr { /* --- New Macros for the changed kl_config_hdr_t structure --- */ -#if defined(CONFIG_SGI_IO) -#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ - ((__psunsigned_t)_k + (_k->ch_malloc_hdr_off))) -#else #define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ (unsigned long)_k + (_k->ch_malloc_hdr_off))) -#endif #define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n)) -#if defined(CONFIG_SGI_IO) -#define PTR_CH_CONS_INFO(_k) ((console_t *)\ - ((__psunsigned_t)_k + (_k->ch_cons_off))) -#else #define PTR_CH_CONS_INFO(_k) ((console_t *)\ ((unsigned long)_k + (_k->ch_cons_off))) -#endif #define KL_CONFIG_CH_CONS_INFO(_n) PTR_CH_CONS_INFO(KL_CONFIG_HDR(_n)) @@ -490,14 +459,6 @@ typedef struct lboard_s { #define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts) #define KLCF_MODULE_ID(_brd) ((_brd)->brd_module) -#ifdef FRUTEST - -#define KLCF_NEXT(_brd) ((_brd)->brd_next ? (lboard_t *)((_brd)->brd_next): NULL) -#define KLCF_COMP(_brd, _ndx) (klinfo_t *)((_brd)->brd_compts[(_ndx)]) -#define KLCF_COMP_ERROR(_brd, _comp) (_brd = _brd , (_comp)->errinfo) - -#else - #define KLCF_NEXT(_brd) \ ((_brd)->brd_next ? \ (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\ @@ -509,8 +470,6 @@ typedef struct lboard_s { #define KLCF_COMP_ERROR(_brd, _comp) \ (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo)) -#endif - #define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type) #define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */ @@ -631,18 +590,6 @@ typedef struct klport_s { klconf_off_t port_offset; } klport_t; -#if 0 -/* - * This is very similar to the klport_s but instead of having a componant - * offset it has a board offset. - */ -typedef struct klxbow_port_s { - nasid_t port_nasid; - unsigned char port_flag; - klconf_off_t board_offset; -} klxbow_port_t; -#endif - typedef struct klcpu_s { /* CPU */ klinfo_t cpu_info; unsigned short cpu_prid; /* Processor PRID value */ @@ -945,36 +892,6 @@ extern klcpu_t *nasid_slice_to_cpuinfo(nasid_t, int); extern lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_class); -#if defined(CONFIG_SGI_IO) -extern xwidgetnum_t nodevertex_widgetnum_get(vertex_hdl_t node_vtx); -extern vertex_hdl_t nodevertex_xbow_peer_get(vertex_hdl_t node_vtx); -extern lboard_t *find_gfxpipe(int pipenum); -extern void setup_gfxpipe_link(vertex_hdl_t vhdl,int pipenum); -extern lboard_t *find_lboard_module_class(lboard_t *start, moduleid_t mod, - unsigned char brd_class); -extern lboard_t *find_nic_lboard(lboard_t *, nic_t); -extern lboard_t *find_nic_type_lboard(nasid_t, unsigned char, nic_t); -extern lboard_t *find_lboard_modslot(lboard_t *start, moduleid_t mod, slotid_t slot); -extern lboard_t *find_lboard_module(lboard_t *start, moduleid_t mod); -extern lboard_t *get_board_name(nasid_t nasid, moduleid_t mod, slotid_t slot, char *name); -extern int config_find_nic_router(nasid_t, nic_t, lboard_t **, klrou_t**); -extern int config_find_nic_hub(nasid_t, nic_t, lboard_t **, klhub_t**); -extern int config_find_xbow(nasid_t, lboard_t **, klxbow_t**); -extern klcpu_t *get_cpuinfo(cpuid_t cpu); -extern int update_klcfg_cpuinfo(nasid_t, int); -extern void board_to_path(lboard_t *brd, char *path); -extern moduleid_t get_module_id(nasid_t nasid); -extern void nic_name_convert(char *old_name, char *new_name); -extern int module_brds(nasid_t nasid, lboard_t **module_brds, int n); -extern lboard_t *brd_from_key(ulong_t key); -extern void device_component_canonical_name_get(lboard_t *,klinfo_t *, - char *); -extern int board_serial_number_get(lboard_t *,char *); -extern int is_master_baseio(nasid_t,moduleid_t,slotid_t); -extern nasid_t get_actual_nasid(lboard_t *brd) ; -extern net_vec_t klcfg_discover_route(lboard_t *, lboard_t *, int); -#else /* CONFIG_SGI_IO */ extern klcpu_t *sn_get_cpuinfo(cpuid_t cpu); -#endif /* CONFIG_SGI_IO */ #endif /* _ASM_SN_KLCONFIG_H */ diff --git a/include/asm-mips/sn/kldir.h b/include/asm-mips/sn/kldir.h index f0efab1672e..97ad52e3cbc 100644 --- a/include/asm-mips/sn/kldir.h +++ b/include/asm-mips/sn/kldir.h @@ -13,10 +13,6 @@ #include <linux/config.h> -#if defined(CONFIG_SGI_IO) -#include <asm/hack.h> -#endif - /* * The kldir memory area resides at a fixed place in each node's memory and * provides pointers to most other IP27 memory areas. This allows us to @@ -136,8 +132,6 @@ #define KLDIR_OFF_STRIDE 0x28 #endif /* __ASSEMBLY__ */ -#if !defined(CONFIG_SGI_IO) - /* * This is defined here because IP27_SYMMON_STK_SIZE must be at least what * we define here. Since it's set up in the prom. We can't redefine it later @@ -147,7 +141,7 @@ */ #define SYMMON_STACK_SIZE 0x8000 -#if defined (PROM) || defined (SABLE) +#if defined (PROM) /* * These defines are prom version dependent. No code other than the IP27 @@ -184,7 +178,7 @@ #define IP27_FREEMEM_COUNT 1 #define IP27_FREEMEM_STRIDE 0 -#endif /* PROM || SABLE*/ +#endif /* PROM */ /* * There will be only one of these in a partition so the IO6 must set it up. */ @@ -207,17 +201,11 @@ #define KLDIR_ENT_SIZE 0x40 #define KLDIR_MAX_ENTRIES (0x400 / 0x40) -#endif /* !CONFIG_SGI_IO */ - #ifndef __ASSEMBLY__ typedef struct kldir_ent_s { u64 magic; /* Indicates validity of entry */ off_t offset; /* Offset from start of node space */ -#if defined(CONFIG_SGI_IO) /* FIXME */ - __psunsigned_t pointer; /* Pointer to area in some cases */ -#else unsigned long pointer; /* Pointer to area in some cases */ -#endif size_t size; /* Size in bytes */ u64 count; /* Repeat count if array, 1 if not */ size_t stride; /* Stride if array, 0 if not */ @@ -227,22 +215,4 @@ typedef struct kldir_ent_s { } kldir_ent_t; #endif /* !__ASSEMBLY__ */ -#if defined(CONFIG_SGI_IO) - -#define KLDIR_ENT_SIZE 0x40 -#define KLDIR_MAX_ENTRIES (0x400 / 0x40) - -/* - * The actual offsets of each memory area are machine-dependent - */ -#ifdef CONFIG_SGI_IP27 -// Not yet #include <asm/sn/sn0/kldir.h> -#elif defined(CONFIG_SGI_IP35) -#include <asm/sn/sn1/kldir.h> -#else -#error "kldir.h is currently defined for IP27 and IP35 platforms only" -#endif - -#endif /* CONFIG_SGI_IO */ - #endif /* _ASM_SN_KLDIR_H */ diff --git a/include/asm-mips/sn/sn0/addrs.h b/include/asm-mips/sn/sn0/addrs.h index 398815639fb..2c4b758f673 100644 --- a/include/asm-mips/sn/sn0/addrs.h +++ b/include/asm-mips/sn/sn0/addrs.h @@ -49,7 +49,7 @@ * so for now we just use defines bracketed by an ifdef. */ -#ifdef CONFIG_SGI_SN0_N_MODE +#ifdef CONFIG_SGI_SN_N_MODE #define NODE_SIZE_BITS 31 #define BWIN_SIZE_BITS 28 @@ -63,7 +63,7 @@ #define BDDIR_UPPER_MASK (UINT64_CAST 0x7ffff << 10) #define BDECC_UPPER_MASK (UINT64_CAST 0x3ffffff << 3) -#else /* !defined(CONFIG_SGI_SN0_N_MODE), assume that M-mode is desired */ +#else /* !defined(CONFIG_SGI_SN_N_MODE), assume that M-mode is desired */ #define NODE_SIZE_BITS 32 #define BWIN_SIZE_BITS 29 @@ -77,7 +77,7 @@ #define BDDIR_UPPER_MASK (UINT64_CAST 0xfffff << 10) #define BDECC_UPPER_MASK (UINT64_CAST 0x7ffffff << 3) -#endif /* !defined(CONFIG_SGI_SN0_N_MODE) */ +#endif /* !defined(CONFIG_SGI_SN_N_MODE) */ #define NODE_ADDRSPACE_SIZE (UINT64_CAST 1 << NODE_SIZE_BITS) @@ -85,15 +85,15 @@ #define NASID_GET(_pa) (int) ((UINT64_CAST (_pa) >> \ NASID_SHFT) & NASID_BITMASK) -#if !defined(__ASSEMBLY__) && !defined(_STANDALONE) +#if !defined(__ASSEMBLY__) #define NODE_SWIN_BASE(nasid, widget) \ ((widget == 0) ? NODE_BWIN_BASE((nasid), SWIN0_BIGWIN) \ : RAW_NODE_SWIN_BASE(nasid, widget)) -#else /* __ASSEMBLY__ || _STANDALONE */ +#else /* __ASSEMBLY__ */ #define NODE_SWIN_BASE(nasid, widget) \ (NODE_IO_BASE(nasid) + (UINT64_CAST (widget) << SWIN_SIZE_BITS)) -#endif /* __ASSEMBLY__ || _STANDALONE */ +#endif /* __ASSEMBLY__ */ /* * The following definitions pertain to the IO special address @@ -143,12 +143,7 @@ #define SN0_WIDGET_BASE(_nasid, _wid) (NODE_SWIN_BASE((_nasid), (_wid))) /* Turn on sable logging for the processors whose bits are set. */ -#ifdef SABLE -#define SABLE_LOG_TRIGGER(_map) \ - *((volatile hubreg_t *)(IO_BASE + 0x17ffff0)) = (_map) -#else #define SABLE_LOG_TRIGGER(_map) -#endif /* SABLE */ #ifndef __ASSEMBLY__ #define KERN_NMI_ADDR(nasid, slice) \ @@ -281,76 +276,6 @@ #define _ARCSPROM -#ifdef _STANDALONE - -/* - * The PROM needs to pass the device base address and the - * device pci cfg space address to the device drivers during - * install. The COMPONENT->Key field is used for this purpose. - * Macros needed by SN0 device drivers to convert the - * COMPONENT->Key field to the respective base address. - * Key field looks as follows: - * - * +----------------------------------------------------+ - * |devnasid | widget |pciid |hubwidid|hstnasid | adap | - * | 2 | 1 | 1 | 1 | 2 | 1 | - * +----------------------------------------------------+ - * | | | | | | | - * 64 48 40 32 24 8 0 - * - * These are used by standalone drivers till the io infrastructure - * is in place. - */ - -#ifndef __ASSEMBLY__ - -#define uchar unsigned char - -#define KEY_DEVNASID_SHFT 48 -#define KEY_WIDID_SHFT 40 -#define KEY_PCIID_SHFT 32 -#define KEY_HUBWID_SHFT 24 -#define KEY_HSTNASID_SHFT 8 - -#define MK_SN0_KEY(nasid, widid, pciid) \ - ((((__psunsigned_t)nasid)<< KEY_DEVNASID_SHFT |\ - ((__psunsigned_t)widid) << KEY_WIDID_SHFT) |\ - ((__psunsigned_t)pciid) << KEY_PCIID_SHFT) - -#define ADD_HUBWID_KEY(key,hubwid)\ - (key|=((__psunsigned_t)hubwid << KEY_HUBWID_SHFT)) - -#define ADD_HSTNASID_KEY(key,hstnasid)\ - (key|=((__psunsigned_t)hstnasid << KEY_HSTNASID_SHFT)) - -#define GET_DEVNASID_FROM_KEY(key) ((short)(key >> KEY_DEVNASID_SHFT)) -#define GET_WIDID_FROM_KEY(key) ((uchar)(key >> KEY_WIDID_SHFT)) -#define GET_PCIID_FROM_KEY(key) ((uchar)(key >> KEY_PCIID_SHFT)) -#define GET_HUBWID_FROM_KEY(key) ((uchar)(key >> KEY_HUBWID_SHFT)) -#define GET_HSTNASID_FROM_KEY(key) ((short)(key >> KEY_HSTNASID_SHFT)) - -#define PCI_64_TARGID_SHFT 60 - -#define GET_PCIBASE_FROM_KEY(key) (NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\ - GET_WIDID_FROM_KEY(key))\ - | BRIDGE_DEVIO(GET_PCIID_FROM_KEY(key))) - -#define GET_PCICFGBASE_FROM_KEY(key) \ - (NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\ - GET_WIDID_FROM_KEY(key))\ - | BRIDGE_TYPE0_CFG_DEV(GET_PCIID_FROM_KEY(key))) - -#define GET_WIDBASE_FROM_KEY(key) \ - (NODE_SWIN_BASE(GET_DEVNASID_FROM_KEY(key),\ - GET_WIDID_FROM_KEY(key))) - -#define PUT_INSTALL_STATUS(c,s) c->Revision = s -#define GET_INSTALL_STATUS(c) c->Revision - -#endif /* !__ASSEMBLY__ */ - -#endif /* _STANDALONE */ - #if defined (HUB_ERR_STS_WAR) #define ERR_STS_WAR_REGISTER IIO_IIBUSERR diff --git a/include/asm-mips/sn/sn0/arch.h b/include/asm-mips/sn/sn0/arch.h index fb78773a5ef..f7c43fa24aa 100644 --- a/include/asm-mips/sn/sn0/arch.h +++ b/include/asm-mips/sn/sn0/arch.h @@ -13,8 +13,6 @@ #include <linux/config.h> -#ifndef SABLE - #ifndef SN0XXL /* 128 cpu SMP max */ /* * This is the maximum number of nodes that can be part of a kernel. @@ -54,25 +52,16 @@ */ #define MAX_PARTITIONS MAX_REGIONS - -#else - -#define MAX_COMPACT_NODES 4 -#define MAX_NASIDS 4 -#define MAXCPUS 8 - -#endif - #define NASID_MASK_BYTES ((MAX_NASIDS + 7) / 8) /* * Slot constants for SN0 */ -#ifdef CONFIG_SGI_SN0_N_MODE +#ifdef CONFIG_SGI_SN_N_MODE #define MAX_MEM_SLOTS 16 /* max slots per node */ -#else /* !CONFIG_SGI_SN0_N_MODE, assume M_MODE */ +#else /* !CONFIG_SGI_SN_N_MODE, assume CONFIG_SGI_SN_M_MODE */ #define MAX_MEM_SLOTS 32 /* max slots per node */ -#endif /* defined(N_MODE) */ +#endif /* CONFIG_SGI_SN_M_MODE */ #define SLOT_SHIFT (27) #define SLOT_MIN_MEM_SIZE (32*1024*1024) diff --git a/include/asm-mips/sn/sn0/hub.h b/include/asm-mips/sn/sn0/hub.h index f5dbba6f461..3e228f8e796 100644 --- a/include/asm-mips/sn/sn0/hub.h +++ b/include/asm-mips/sn/sn0/hub.h @@ -31,10 +31,6 @@ #include <asm/sn/sn0/hubni.h> //#include <asm/sn/sn0/hubcore.h> -#ifdef SABLE -#define IP27_NO_HUBUART_INT 1 -#endif - /* Translation of uncached attributes */ #define UATTR_HSPEC 0 #define UATTR_IO 1 diff --git a/include/asm-mips/sn/sn0/hubio.h b/include/asm-mips/sn/sn0/hubio.h index f314da21b97..ef91b336355 100644 --- a/include/asm-mips/sn/sn0/hubio.h +++ b/include/asm-mips/sn/sn0/hubio.h @@ -486,22 +486,6 @@ typedef union h1_icrba_u { #define ICRBN_A_CERR_SHFT 54 #define ICRBN_A_ERR_MASK 0x3ff -#if 0 /* Disabled, this causes namespace polution and break allmodconfig */ -/* - * Easy access macros. - */ -#define a_error icrba_fields_s.error -#define a_ecode icrba_fields_s.ecode -#define a_lnetuce icrba_fields_s.lnetuce -#define a_mark icrba_fields_s.mark -#define a_xerr icrba_fields_s.xerr -#define a_sidn icrba_fields_s.sidn -#define a_tnum icrba_fields_s.tnum -#define a_addr icrba_fields_s.addr -#define a_valid icrba_fields_s.valid -#define a_iow icrba_fields_s.iow -#endif - #endif /* !__ASSEMBLY__ */ #define IIO_ICRB_ADDR_SHFT 2 /* Shift to get proper address */ diff --git a/include/asm-mips/sn/sn0/hubmd.h b/include/asm-mips/sn/sn0/hubmd.h index a66def4e0ba..1006aa26d77 100644 --- a/include/asm-mips/sn/sn0/hubmd.h +++ b/include/asm-mips/sn/sn0/hubmd.h @@ -92,7 +92,7 @@ #define MD_UREG1_14 0x2200f0 /* uController/UART 1 register */ #define MD_UREG1_15 0x2200f8 /* uController/UART 1 register */ -#ifdef CONFIG_SGI_SN0_N_MODE +#ifdef CONFIG_SGI_SN_N_MODE #define MD_MEM_BANKS 4 /* 4 banks of memory max in N mode */ #else #define MD_MEM_BANKS 8 /* 8 banks of memory max in M mode */ diff --git a/include/asm-mips/sn/sn0/hubpi.h b/include/asm-mips/sn/sn0/hubpi.h index 355bba8552e..e39f5f9da04 100644 --- a/include/asm-mips/sn/sn0/hubpi.h +++ b/include/asm-mips/sn/sn0/hubpi.h @@ -398,24 +398,6 @@ typedef u64 rtc_time_t; /* PI_RT_FILTER_CTRL mask and shift definitions */ -#if 0 -/* - * XXX - This register's definition has changed, but it's only implemented - * in Hub 2. - */ -#define PRFC_DROP_COUNT_SHFT 27 -#define PRFC_DROP_COUNT_MASK (UINT64_CAST 0x3ff << 27) -#define PRFC_DROP_CTR_SHFT 18 -#define PRFC_DROP_CTR_MASK (UINT64_CAST 0x1ff << 18) -#define PRFC_MASK_ENABLE_SHFT 10 -#define PRFC_MASK_ENABLE_MASK (UINT64_CAST 0x7f << 10) -#define PRFC_MASK_CTR_SHFT 2 -#define PRFC_MASK_CTR_MASK (UINT64_CAST 0xff << 2) -#define PRFC_OFFSET_SHFT 0 -#define PRFC_OFFSET_MASK (UINT64_CAST 3) -#endif /* 0 */ - - /* * Bits for NACK_CNT_A/B and NACK_CMP */ diff --git a/include/asm-mips/sn/sn0/ip27.h b/include/asm-mips/sn/sn0/ip27.h index ade0e974dd7..3c97e0855c8 100644 --- a/include/asm-mips/sn/sn0/ip27.h +++ b/include/asm-mips/sn/sn0/ip27.h @@ -6,7 +6,7 @@ * Derived from IRIX <sys/SN/SN0/IP27.h>. * * Copyright (C) 1992 - 1997, 1999 Silicon Graphics, Inc. - * Copyright (C) 1999 by Ralf Baechle + * Copyright (C) 1999, 2006 by Ralf Baechle */ #ifndef _ASM_SN_SN0_IP27_H #define _ASM_SN_SN0_IP27_H @@ -82,11 +82,4 @@ #define SEND_NMI(_nasid, _slice) \ REMOTE_HUB_S((_nasid), (PI_NMI_A + ((_slice) * PI_NMI_OFFSET)), 1) -/* Sanity hazzard ... Below all the Origin hacks are following. */ - -#define SN00_BRIDGE 0x9200000008000000 -#define SN00I_BRIDGE0 0x920000000b000000 -#define SN00I_BRIDGE1 0x920000000e000000 -#define SN00I_BRIDGE2 0x920000000f000000 - #endif /* _ASM_SN_SN0_IP27_H */ diff --git a/include/asm-mips/sni.h b/include/asm-mips/sni.h index b3bc698dfde..b9ba54d0dd3 100644 --- a/include/asm-mips/sni.h +++ b/include/asm-mips/sni.h @@ -15,9 +15,6 @@ /* * ASIC PCI registers for little endian configuration. */ -#ifndef __MIPSEL__ -#error "Fix me for big endian" -#endif #define PCIMT_UCONF 0xbfff0000 #define PCIMT_IOADTIMEOUT2 0xbfff0008 #define PCIMT_IOMEMCONF 0xbfff0010 @@ -51,9 +48,9 @@ #define PCIMT_PCI_CONF 0xbfff0100 /* - * Data port for the PCI bus. + * Data port for the PCI bus in IO space */ -#define PCIMT_CONFIG_DATA 0xb4000cfc +#define PCIMT_CONFIG_DATA 0x0cfc /* * Board specific registers diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h index ad374bd3f13..70636b41832 100644 --- a/include/asm-mips/war.h +++ b/include/asm-mips/war.h @@ -172,7 +172,8 @@ * On the RM9000 there is a problem which makes the CreateDirtyExclusive * cache operation unusable on SMP systems. */ -#if defined(CONFIG_MOMENCO_JAGUAR_ATX) || defined(CONFIG_PMC_YOSEMITE) +#if defined(CONFIG_MOMENCO_JAGUAR_ATX) || defined(CONFIG_PMC_YOSEMITE) || \ + defined(CONFIG_BASLER_EXCITE) #define RM9000_CDEX_SMP_WAR 1 #endif @@ -182,7 +183,7 @@ * being fetched may case spurious exceptions. */ #if defined(CONFIG_MOMENCO_JAGUAR_ATX) || defined(CONFIG_MOMENCO_OCELOT_3) || \ - defined(CONFIG_PMC_YOSEMITE) + defined(CONFIG_PMC_YOSEMITE) || defined(CONFIG_BASLER_EXCITE) #define ICACHE_REFILLS_WORKAROUND_WAR 1 #endif |