aboutsummaryrefslogtreecommitdiff
path: root/include/asm-parisc/dma.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-parisc/dma.h')
-rw-r--r--include/asm-parisc/dma.h186
1 files changed, 0 insertions, 186 deletions
diff --git a/include/asm-parisc/dma.h b/include/asm-parisc/dma.h
deleted file mode 100644
index 31ad0f05af3..00000000000
--- a/include/asm-parisc/dma.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/* $Id: dma.h,v 1.2 1999/04/27 00:46:18 deller Exp $
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- * (c) Copyright 2000, Grant Grundler
- */
-
-#ifndef _ASM_DMA_H
-#define _ASM_DMA_H
-
-#include <asm/io.h> /* need byte IO */
-#include <asm/system.h>
-
-#define dma_outb outb
-#define dma_inb inb
-
-/*
-** DMA_CHUNK_SIZE is used by the SCSI mid-layer to break up
-** (or rather not merge) DMAs into manageable chunks.
-** On parisc, this is more of the software/tuning constraint
-** rather than the HW. I/O MMU allocation algorithms can be
-** faster with smaller sizes (to some degree).
-*/
-#define DMA_CHUNK_SIZE (BITS_PER_LONG*PAGE_SIZE)
-
-/* The maximum address that we can perform a DMA transfer to on this platform
-** New dynamic DMA interfaces should obsolete this....
-*/
-#define MAX_DMA_ADDRESS (~0UL)
-
-/*
-** We don't have DMA channels... well V-class does but the
-** Dynamic DMA Mapping interface will support them... right? :^)
-** Note: this is not relevant right now for PA-RISC, but we cannot
-** leave this as undefined because some things (e.g. sound)
-** won't compile :-(
-*/
-#define MAX_DMA_CHANNELS 8
-#define DMA_MODE_READ 0x44 /* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE 0x48 /* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0 /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT 0x10
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE 0xC0 /* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG 0x08 /* command register (w) */
-#define DMA1_STAT_REG 0x08 /* status register (r) */
-#define DMA1_REQ_REG 0x09 /* request register (w) */
-#define DMA1_MASK_REG 0x0A /* single-channel mask (w) */
-#define DMA1_MODE_REG 0x0B /* mode register (w) */
-#define DMA1_CLEAR_FF_REG 0x0C /* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG 0x0D /* Temporary Register (r) */
-#define DMA1_RESET_REG 0x0D /* Master Clear (w) */
-#define DMA1_CLR_MASK_REG 0x0E /* Clear Mask */
-#define DMA1_MASK_ALL_REG 0x0F /* all-channels mask (w) */
-#define DMA1_EXT_MODE_REG (0x400 | DMA1_MODE_REG)
-
-#define DMA2_CMD_REG 0xD0 /* command register (w) */
-#define DMA2_STAT_REG 0xD0 /* status register (r) */
-#define DMA2_REQ_REG 0xD2 /* request register (w) */
-#define DMA2_MASK_REG 0xD4 /* single-channel mask (w) */
-#define DMA2_MODE_REG 0xD6 /* mode register (w) */
-#define DMA2_CLEAR_FF_REG 0xD8 /* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG 0xDA /* Temporary Register (r) */
-#define DMA2_RESET_REG 0xDA /* Master Clear (w) */
-#define DMA2_CLR_MASK_REG 0xDC /* Clear Mask */
-#define DMA2_MASK_ALL_REG 0xDE /* all-channels mask (w) */
-#define DMA2_EXT_MODE_REG (0x400 | DMA2_MODE_REG)
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
- return 0;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
- unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
- : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
-
- /* using short to get 16-bit wrap around */
- unsigned short count;
-
- count = 1 + dma_inb(io_port);
- count += dma_inb(io_port) << 8;
-
- return (dmanr<=3)? count : (count<<1);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-#ifdef CONFIG_SUPERIO
- if (dmanr<=3)
- dma_outb(dmanr, DMA1_MASK_REG);
- else
- dma_outb(dmanr & 3, DMA2_MASK_REG);
-#endif
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-#ifdef CONFIG_SUPERIO
- if (dmanr<=3)
- dma_outb(dmanr | 4, DMA1_MASK_REG);
- else
- dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
-#endif
-}
-
-/* reserve a DMA channel */
-#define request_dma(dmanr, device_id) (0)
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-}
-
-/* Set only the page register bits of the transfer address.
- * This is used for successive transfers when we know the contents of
- * the lower 16 bits of the DMA current address register, but a 64k boundary
- * may have been crossed.
- */
-static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
-{
-}
-
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-}
-
-
-#define free_dma(dmanr)
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
-#endif /* _ASM_DMA_H */