diff options
Diffstat (limited to 'include/asm-powerpc/uaccess.h')
| -rw-r--r-- | include/asm-powerpc/uaccess.h | 496 |
1 files changed, 0 insertions, 496 deletions
diff --git a/include/asm-powerpc/uaccess.h b/include/asm-powerpc/uaccess.h deleted file mode 100644 index bd0fb849515..00000000000 --- a/include/asm-powerpc/uaccess.h +++ /dev/null @@ -1,496 +0,0 @@ -#ifndef _ARCH_POWERPC_UACCESS_H -#define _ARCH_POWERPC_UACCESS_H - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ - -#include <linux/sched.h> -#include <linux/errno.h> -#include <asm/asm-compat.h> -#include <asm/processor.h> -#include <asm/page.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons, these macros are grossly misnamed. - * - * The fs/ds values are now the highest legal address in the "segment". - * This simplifies the checking in the routines below. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_DS MAKE_MM_SEG(~0UL) -#ifdef __powerpc64__ -/* We use TASK_SIZE_USER64 as TASK_SIZE is not constant */ -#define USER_DS MAKE_MM_SEG(TASK_SIZE_USER64 - 1) -#else -#define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) -#endif - -#define get_ds() (KERNEL_DS) -#define get_fs() (current->thread.fs) -#define set_fs(val) (current->thread.fs = (val)) - -#define segment_eq(a, b) ((a).seg == (b).seg) - -#ifdef __powerpc64__ -/* - * This check is sufficient because there is a large enough - * gap between user addresses and the kernel addresses - */ -#define __access_ok(addr, size, segment) \ - (((addr) <= (segment).seg) && ((size) <= (segment).seg)) - -#else - -#define __access_ok(addr, size, segment) \ - (((addr) <= (segment).seg) && \ - (((size) == 0) || (((size) - 1) <= ((segment).seg - (addr))))) - -#endif - -#define access_ok(type, addr, size) \ - (__chk_user_ptr(addr), \ - __access_ok((__force unsigned long)(addr), (size), get_fs())) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry { - unsigned long insn; - unsigned long fixup; -}; - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - * - * This gets kind of ugly. We want to return _two_ values in "get_user()" - * and yet we don't want to do any pointers, because that is too much - * of a performance impact. Thus we have a few rather ugly macros here, - * and hide all the ugliness from the user. - * - * The "__xxx" versions of the user access functions are versions that - * do not verify the address space, that must have been done previously - * with a separate "access_ok()" call (this is used when we do multiple - * accesses to the same area of user memory). - * - * As we use the same address space for kernel and user data on the - * PowerPC, we can just do these as direct assignments. (Of course, the - * exception handling means that it's no longer "just"...) - * - * The "user64" versions of the user access functions are versions that - * allow access of 64-bit data. The "get_user" functions do not - * properly handle 64-bit data because the value gets down cast to a long. - * The "put_user" functions already handle 64-bit data properly but we add - * "user64" versions for completeness - */ -#define get_user(x, ptr) \ - __get_user_check((x), (ptr), sizeof(*(ptr))) -#define put_user(x, ptr) \ - __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) - -#define __get_user(x, ptr) \ - __get_user_nocheck((x), (ptr), sizeof(*(ptr))) -#define __put_user(x, ptr) \ - __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) - -#ifndef __powerpc64__ -#define __get_user64(x, ptr) \ - __get_user64_nocheck((x), (ptr), sizeof(*(ptr))) -#define __put_user64(x, ptr) __put_user(x, ptr) -#endif - -#define __get_user_inatomic(x, ptr) \ - __get_user_nosleep((x), (ptr), sizeof(*(ptr))) -#define __put_user_inatomic(x, ptr) \ - __put_user_nosleep((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) - -#define __get_user_unaligned __get_user -#define __put_user_unaligned __put_user - -extern long __put_user_bad(void); - -/* - * We don't tell gcc that we are accessing memory, but this is OK - * because we do not write to any memory gcc knows about, so there - * are no aliasing issues. - */ -#define __put_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - "1: " op " %1,0(%2) # put_user\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - PPC_LONG_ALIGN "\n" \ - PPC_LONG "1b,3b\n" \ - ".previous" \ - : "=r" (err) \ - : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) - -#ifdef __powerpc64__ -#define __put_user_asm2(x, ptr, retval) \ - __put_user_asm(x, ptr, retval, "std") -#else /* __powerpc64__ */ -#define __put_user_asm2(x, addr, err) \ - __asm__ __volatile__( \ - "1: stw %1,0(%2)\n" \ - "2: stw %1+1,4(%2)\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - "4: li %0,%3\n" \ - " b 3b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - PPC_LONG_ALIGN "\n" \ - PPC_LONG "1b,4b\n" \ - PPC_LONG "2b,4b\n" \ - ".previous" \ - : "=r" (err) \ - : "r" (x), "b" (addr), "i" (-EFAULT), "0" (err)) -#endif /* __powerpc64__ */ - -#define __put_user_size(x, ptr, size, retval) \ -do { \ - retval = 0; \ - switch (size) { \ - case 1: __put_user_asm(x, ptr, retval, "stb"); break; \ - case 2: __put_user_asm(x, ptr, retval, "sth"); break; \ - case 4: __put_user_asm(x, ptr, retval, "stw"); break; \ - case 8: __put_user_asm2(x, ptr, retval); break; \ - default: __put_user_bad(); \ - } \ -} while (0) - -#define __put_user_nocheck(x, ptr, size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - if (!is_kernel_addr((unsigned long)__pu_addr)) \ - might_sleep(); \ - __chk_user_ptr(ptr); \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x, ptr, size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - might_sleep(); \ - if (access_ok(VERIFY_WRITE, __pu_addr, size)) \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ - __pu_err; \ -}) - -#define __put_user_nosleep(x, ptr, size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ - __pu_err; \ -}) - - -extern long __get_user_bad(void); - -#define __get_user_asm(x, addr, err, op) \ - __asm__ __volatile__( \ - "1: "op" %1,0(%2) # get_user\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,%3\n" \ - " li %1,0\n" \ - " b 2b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - PPC_LONG_ALIGN "\n" \ - PPC_LONG "1b,3b\n" \ - ".previous" \ - : "=r" (err), "=r" (x) \ - : "b" (addr), "i" (-EFAULT), "0" (err)) - -#ifdef __powerpc64__ -#define __get_user_asm2(x, addr, err) \ - __get_user_asm(x, addr, err, "ld") -#else /* __powerpc64__ */ -#define __get_user_asm2(x, addr, err) \ - __asm__ __volatile__( \ - "1: lwz %1,0(%2)\n" \ - "2: lwz %1+1,4(%2)\n" \ - "3:\n" \ - ".section .fixup,\"ax\"\n" \ - "4: li %0,%3\n" \ - " li %1,0\n" \ - " li %1+1,0\n" \ - " b 3b\n" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n" \ - PPC_LONG_ALIGN "\n" \ - PPC_LONG "1b,4b\n" \ - PPC_LONG "2b,4b\n" \ - ".previous" \ - : "=r" (err), "=&r" (x) \ - : "b" (addr), "i" (-EFAULT), "0" (err)) -#endif /* __powerpc64__ */ - -#define __get_user_size(x, ptr, size, retval) \ -do { \ - retval = 0; \ - __chk_user_ptr(ptr); \ - if (size > sizeof(x)) \ - (x) = __get_user_bad(); \ - switch (size) { \ - case 1: __get_user_asm(x, ptr, retval, "lbz"); break; \ - case 2: __get_user_asm(x, ptr, retval, "lhz"); break; \ - case 4: __get_user_asm(x, ptr, retval, "lwz"); break; \ - case 8: __get_user_asm2(x, ptr, retval); break; \ - default: (x) = __get_user_bad(); \ - } \ -} while (0) - -#define __get_user_nocheck(x, ptr, size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - if (!is_kernel_addr((unsigned long)__gu_addr)) \ - might_sleep(); \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#ifndef __powerpc64__ -#define __get_user64_nocheck(x, ptr, size) \ -({ \ - long __gu_err; \ - long long __gu_val; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - if (!is_kernel_addr((unsigned long)__gu_addr)) \ - might_sleep(); \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) -#endif /* __powerpc64__ */ - -#define __get_user_check(x, ptr, size) \ -({ \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - might_sleep(); \ - if (access_ok(VERIFY_READ, __gu_addr, (size))) \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_nosleep(x, ptr, size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - - -/* more complex routines */ - -extern unsigned long __copy_tofrom_user(void __user *to, - const void __user *from, unsigned long size); - -#ifndef __powerpc64__ - -static inline unsigned long copy_from_user(void *to, - const void __user *from, unsigned long n) -{ - unsigned long over; - - if (access_ok(VERIFY_READ, from, n)) - return __copy_tofrom_user((__force void __user *)to, from, n); - if ((unsigned long)from < TASK_SIZE) { - over = (unsigned long)from + n - TASK_SIZE; - return __copy_tofrom_user((__force void __user *)to, from, - n - over) + over; - } - return n; -} - -static inline unsigned long copy_to_user(void __user *to, - const void *from, unsigned long n) -{ - unsigned long over; - - if (access_ok(VERIFY_WRITE, to, n)) - return __copy_tofrom_user(to, (__force void __user *)from, n); - if ((unsigned long)to < TASK_SIZE) { - over = (unsigned long)to + n - TASK_SIZE; - return __copy_tofrom_user(to, (__force void __user *)from, - n - over) + over; - } - return n; -} - -#else /* __powerpc64__ */ - -#define __copy_in_user(to, from, size) \ - __copy_tofrom_user((to), (from), (size)) - -extern unsigned long copy_from_user(void *to, const void __user *from, - unsigned long n); -extern unsigned long copy_to_user(void __user *to, const void *from, - unsigned long n); -extern unsigned long copy_in_user(void __user *to, const void __user *from, - unsigned long n); - -#endif /* __powerpc64__ */ - -static inline unsigned long __copy_from_user_inatomic(void *to, - const void __user *from, unsigned long n) -{ - if (__builtin_constant_p(n) && (n <= 8)) { - unsigned long ret = 1; - - switch (n) { - case 1: - __get_user_size(*(u8 *)to, from, 1, ret); - break; - case 2: - __get_user_size(*(u16 *)to, from, 2, ret); - break; - case 4: - __get_user_size(*(u32 *)to, from, 4, ret); - break; - case 8: - __get_user_size(*(u64 *)to, from, 8, ret); - break; - } - if (ret == 0) - return 0; - } - return __copy_tofrom_user((__force void __user *)to, from, n); -} - -static inline unsigned long __copy_to_user_inatomic(void __user *to, - const void *from, unsigned long n) -{ - if (__builtin_constant_p(n) && (n <= 8)) { - unsigned long ret = 1; - - switch (n) { - case 1: - __put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret); - break; - case 2: - __put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret); - break; - case 4: - __put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret); - break; - case 8: - __put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret); - break; - } - if (ret == 0) - return 0; - } - return __copy_tofrom_user(to, (__force const void __user *)from, n); -} - -static inline unsigned long __copy_from_user(void *to, - const void __user *from, unsigned long size) -{ - might_sleep(); - return __copy_from_user_inatomic(to, from, size); -} - -static inline unsigned long __copy_to_user(void __user *to, - const void *from, unsigned long size) -{ - might_sleep(); - return __copy_to_user_inatomic(to, from, size); -} - -extern unsigned long __clear_user(void __user *addr, unsigned long size); - -static inline unsigned long clear_user(void __user *addr, unsigned long size) -{ - might_sleep(); - if (likely(access_ok(VERIFY_WRITE, addr, size))) - return __clear_user(addr, size); - if ((unsigned long)addr < TASK_SIZE) { - unsigned long over = (unsigned long)addr + size - TASK_SIZE; - return __clear_user(addr, size - over) + over; - } - return size; -} - -extern int __strncpy_from_user(char *dst, const char __user *src, long count); - -static inline long strncpy_from_user(char *dst, const char __user *src, - long count) -{ - might_sleep(); - if (likely(access_ok(VERIFY_READ, src, 1))) - return __strncpy_from_user(dst, src, count); - return -EFAULT; -} - -/* - * Return the size of a string (including the ending 0) - * - * Return 0 for error - */ -extern int __strnlen_user(const char __user *str, long len, unsigned long top); - -/* - * Returns the length of the string at str (including the null byte), - * or 0 if we hit a page we can't access, - * or something > len if we didn't find a null byte. - * - * The `top' parameter to __strnlen_user is to make sure that - * we can never overflow from the user area into kernel space. - */ -static inline int strnlen_user(const char __user *str, long len) -{ - unsigned long top = current->thread.fs.seg; - - if ((unsigned long)str > top) - return 0; - return __strnlen_user(str, len, top); -} - -#define strlen_user(str) strnlen_user((str), 0x7ffffffe) - -#endif /* __ASSEMBLY__ */ -#endif /* __KERNEL__ */ - -#endif /* _ARCH_POWERPC_UACCESS_H */ |